WorldWideScience

Sample records for agricultural machinery

  1. Property Analysis of the Agricultural Machinery Lubricants

    OpenAIRE

    Tone Ploj

    2000-01-01

    We need to produce enough healthy and cheap food as well as to preserve the ecologic equilibrium. This can be achived by using modern machinery and up- to-date knowledge and technology. Agricultural machinery, in which 40-60% of all funds are invested, is poorly maintained and underused. The main causes for this are poor knowledge and extensive farm land fragmentation. The fact that over 140,000 tractors in Slovenia are on average 9.6 years old, i.e. that more than 80% of overall agricultural...

  2. Property Analysis of the Agricultural Machinery Lubricants

    Directory of Open Access Journals (Sweden)

    Tone Ploj

    2000-03-01

    Full Text Available We need to produce enough healthy and cheap food as well as to preserve the ecologic equilibrium. This can be achived by using modern machinery and up- to-date knowledge and technology. Agricultural machinery, in which 40-60% of all funds are invested, is poorly maintained and underused. The main causes for this are poor knowledge and extensive farm land fragmentation. The fact that over 140,000 tractors in Slovenia are on average 9.6 years old, i.e. that more than 80% of overall agricultural machinery is obsolete, should be a matter of serious concern. In the paper we follow tribological conditions in particular tractor assemblies. In the first part of the paper we have treated the required conditions of tractor manufacturers in Europe and primarily in Slovenia, what has served us in the final phase of the research for elaboration of the model. In this way we have got data about the presence of particular tractor types. We have separately elaborated the necessary specifications of engine lubricants, transmission, gears, hydraulics and wet breaks. We have carried out chemical and mechanical analyses of all accessible lubricants in agricultural mechanisation. The results of the new oils were coordinated with the required specifications of tractor manufacturers and so we have got such a model, that certainly meet all lubricating requirements of our tractors.

  3. On Development of Agricultural Machinery Operating Service in Chongqing

    Institute of Scientific and Technical Information of China (English)

    Chongjing; TAN; Shi; YANG

    2015-01-01

    Development of agricultural machinery operating service in Chongqing takes on rapid increase in number of service organizations,diversified service methods,improvement in service level,and constant service income. However,there are some problems,including unreasonable composition and small scale of service organization,imbalanced development of four service methods,low service level,and low operating income of agricultural machinery households. To accelerate development of agricultural machinery operating service in Chongqing,it is recommended to take following measures: adjusting subsidy for purchase and operation of agricultural machinery; improving fiscal and taxation and financial system; speeding up infrastructure construction,establishing agricultural machinery information network,and improving organizational form and methods of agricultural machinery operating service.

  4. Navigation of Construction and Agriculture Machinery

    Science.gov (United States)

    Stempfhuber, Werner

    2008-09-01

    Over the last two decades terrestrial and global 3D measurement sensors in the field of engineering geodesy have seen a significant upturn. With modern measurement techniques, a 3D trajectory of a moving object can be determined within a few centimetres (mostly with Global Navigation Satellite Systems, GNSS), under certain circumstances and with an overall understanding of the applied method accuracies of within 5 to 10 millimetres can be achieved (tracking total station). New application areas have been now created in the fields of construction, mining and agriculture. The guidance or control of heavy machinery demands a navigation sensor with an appropriate measurement rate and accuracy, as well as stable and reliable performance. The 3D position, together with the orientation as well as the long and cross inclination information is hereby just one part of the absolute machine guidance or control unit. Data collection, verification, management and interaction of the position information with the 6 degrees of freedom, together and the machine controller, are needed for the overall system. Rotation ring sensors for height control or height guidance are well-known amongst construction jobs and have been in use for more than 20 years. The first GPS-based guidance system for yield mapping was used 15 years ago (Auernhammer 1995). Optimization and improvements in efficiency are the principal reasons for the current developments in the area of 3D-based machine control and guidance. This paper will describe the state-of-the-art and general approaches as well as the real-time 3D measurement techniques in construction and agriculture environment.

  5. TRACTOR REPAIR. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 16.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    THE PURPOSE OF THIS GUIDE IS TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS. IT WAS DESIGNED BY A NATIONAL TASK FORCE ON THE BASIS OF RESEARCH FROM STATE STUDIES. THE MAJOR OBJECTIVE IS TO DEVELOP (1) AN UNDERSTANDING OF THE…

  6. Systems and methods for autonomously controlling agricultural machinery

    Science.gov (United States)

    Hoskinson, Reed L.; Bingham, Dennis N.; Svoboda, John M.; Hess, J. Richard

    2003-07-08

    Systems and methods for autonomously controlling agricultural machinery such as a grain combine. The operation components of a combine that function to harvest the grain have characteristics that are measured by sensors. For example, the combine speed, the fan speed, and the like can be measured. An important sensor is the grain loss sensor, which may be used to quantify the amount of grain expelled out of the combine. The grain loss sensor utilizes the fluorescence properties of the grain kernels and the plant residue to identify when the expelled plant material contains grain kernels. The sensor data, in combination with historical and current data stored in a database, is used to identify optimum operating conditions that will result in increased crop yield. After the optimum operating conditions are identified, an on-board computer can generate control signals that will adjust the operation of the components identified in the optimum operating conditions. The changes result in less grain loss and improved grain yield. Also, because new data is continually generated by the sensor, the system has the ability to continually learn such that the efficiency of the agricultural machinery is continually improved.

  7. Studies on the Future of the Standardization for Tropical Agricultural Machinery

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Tropical crops mainly represented by natural rubber,sisal hemp, sugarcane, cassava, coffee, pepper and coconut, and tropical fruits represented by pineapple,mango, banana, longan, litchi are special economical crops in tropical and subtropical regions in our country. Tropical agricultural machinery is the machinery used for planting, managing, harvesting and processing tropical crops and fruits. In recent years, tropical agricultural machinery has been growing very fast,and has a significantly positive effect on the growth of agricultural economy in tropical regions.

  8. THE LEVEL OF DEALERS’ SATISFACTION WITH THE PRODUCERS OF AGRICULTURAL MACHINERY: GERMAN EXPERIENCE

    Directory of Open Access Journals (Sweden)

    Semenenko K. A.

    2015-12-01

    Full Text Available This article describes a current state of the agricultural machinery market in Germany and presents data of the conducted at the University of Hohenheim analysis of the German dealers’ satisfaction with the producers of agricultural machinery based on a developed questionnaire

  9. ADJUSTMENT, MAINTENANCE, AND REPAIR OF TILLAGE, PLANTING, SPRAYING, AND FERTILIZING MACHINERY. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 10.

    Science.gov (United States)

    Ohio State Univ., Columbus. Center for Vocational and Technical Education.

    THE PURPOSE OF THIS GUIDE IS TO HELP TEACHERS PREPARE POSTSECONDARY-LEVEL STUDENTS FOR THE AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS. IT WAS DESIGNED BY A NATIONAL TASK FORCE ON THE BASIS OF RESEARCH FROM STATE STUDIES. THE MAJOR OBJECTIVE IS TO DEVELOP (1) STUDENT UNDERSTANDING…

  10. Ways of efficiency increase in marketing research management at agricultural machinery industry enterprises

    OpenAIRE

    Andrushkiv, Bohdan Mykolayovych; Nyanko, Vitaliy Mykolayovych; Chaikivskyi, Ivan Adamovych

    2012-01-01

    The offered determinations concerning the main point of marketing research are considered and generalized. The basic ways of increasing the efficiency of marketing research management on the enterprises of agricultural machinery industry are determined and developed. The model of marketing management concerning the relationship with consumers on the market of agricultural machinery industry is worked out. The marketing program of management of relationship with consumers based on the marketin...

  11. Vocational Agriculture Training Program: Safe Tractor and Farm Machinery Operation. Special Paper No. 8. Second Revision.

    Science.gov (United States)

    Bobbitt, Frank; Doss, Howard

    The publication was prepared for the United States Office of Education for use by teachers who direct agricultural training programs in safe tractor operation and safe farm machinery operation that comply with the United States Department of Labor regulations on hazardous occupations in agriculture. Upon successful completion of these training…

  12. The Impacts of Agricultural Machinery Purchase Subsidies on Mechanized Crop Residue Recycling

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Crop residue recycling can improve the quality of the cropland,and it has multiple economic and ecological benefits.However,such practice is with low adoption due to different constraints.In this paper,we use the survey data from Baoding,Hebei province,and use the probit model to explore how the agricultural machinery purchase subsidies affect the mechanized crop residue recycling.The results showed that several factors that affect farmers in adopting the practice of mechanized crop residue crop recycling.Among these factors,the cost of adopting such practice is significant.The agricultural machinery purchase subsidies can effectively reduce the cost of such practice,as well as promote mechanized crop residue recycling.The paper also proposed several actions in the future.They include increasing the subsidies on agricultural machinery purchase and increasing farmers’ awareness on crop residue recycling.

  13. Rearward Visibility Issues Related to Agricultural Tractors and Self-Propelled Machinery: Contributing Factors, Potential Solutions.

    Science.gov (United States)

    Ehlers, S G; Field, W E

    2016-01-01

    As the size, complexity, and speed of agricultural tractors and self-propelled machinery have increased, so have the visibility-related issues, placing significant importance on the visual skills, alertness, and reactive abilities of the operator. Rearward movement of large agricultural equipment has been identified in the literature as causing both fatalities and injuries to bystanders who were not visible to the operator and damage to both the machine and stationary objects. The addition of monitoring assistance, while not a new concept, has advanced significantly, offering agricultural machinery operators greater options for increasing their awareness of the area surrounding the machine. In this research, we attempt to (1) identify and describe the key contributors to agricultural machinery visibility issues, i.e., operator-related and machine-related factors, and (2) enumerate and evaluate the potential solutions being offered that address these factors. Enhanced operator safety and efficiency should result from a better understanding of the efforts to solve the visibility problems inherent in large tractors and self-propelled agricultural machinery. PMID:27024992

  14. An improvement of agricultural equipment manufacturing by using lean techniques : A case study of agricultural machinery company

    OpenAIRE

    Nattariya Pakdeepunya; Panitarn Peerapattana

    2015-01-01

    The objective of this research was to study and improve the manufacturing process of agricultural equipment to reduce wastes by using the LEAN tools: a case study of agricultural machinery company. This study found that the main wastes were inefficiency of transportation and working process. The Systematic Layout Planning Pattern (SLP) had been applied. Moreover, the principles of ECRS, the change in input factors (a number of employees), together with simulation and the Analysis Hierarchy Pr...

  15. Application of radioisotope tracing technique in the agricultural machinery research

    International Nuclear Information System (INIS)

    The radioisotope tracing technique with 60Co and 3H radionuclides was used in the process of shelling, clearing and drying when agricultural machines were utilized. The velocity distribution and travelling time of cereal from inlet to the outlet in the axial-flow threshing cylinder were measured. The dropping and moving velocity on the reciprocating sieve were determined. The effect of heating-drying on the wet cereal which were mixed with dry cereal was studied. The experimental data obtained is useful for improving the functions of shelling, clearing and drying machines as well as the reduction of energy consumption

  16. Agricultural machinery teaching research%农业机械教学研究

    Institute of Scientific and Technical Information of China (English)

    杨玲玲

    2014-01-01

    农业机械教学研究关系着教学成果的实现,影响着学员的实际操作能力。教师应认真研究教材,积极研究教学理论和教学方法,努力提高教学水平。文章从五个方面入手,阐述了如何教好农业机械制造技术专业课程。%The relationship between agricultural machinery teaching research with the realization of the teaching achievement, affect the students' practical ability. Teachers should carefully study the teaching material, the positive re-search of teaching theory and teaching methods, efforts to improve the teaching level. Article from five aspects, this paper expounds how to teach good agricultural machinery manufacturing technology professional courses.

  17. The Application of Combination Forecasting Model in Forecasting the Total Power of Agricultural Machinery in Heilongjiang Province

    Institute of Scientific and Technical Information of China (English)

    Xiaoling; HAO; Ruixia; SUO

    2015-01-01

    Agricultural machinery total power is an important index to reflect and evaluate the level of agricultural mechanization. Firstly,we respectively made use of exponential model,grey forecasting and BP neural network to construct models depending on historical data of agricultural machinery total power of Heilongjiang Province; secondly,we constructed the combined forecasting models that respectively based on divergence coefficient method,quadratic programming and weight distribution of Shapley value. Fitting results showed that the various combination forecasting model is superior to the single models. Finally,we applied the combination forecasting model which based on the weight distribution method of Shapley value to forecast Heilongjiang agricultural machinery total power,and it would provide some reference to the development and program for power of agriculture machinery.

  18. Improvement of finishing antifriction treatment without abrasive of the rubbing parts surfaces of agricultural machineries

    Directory of Open Access Journals (Sweden)

    I.V. Shepelenk

    2014-06-01

    Full Text Available The wear of machines and mechanisms after rubbing is a major concern. The costs of manufacturing and restoration parts for agricultural machinery are enormous such as the trunnions pinions of hydraulic pumps. Finishing treatment antifriction without abrasive (FTAA is the existing method of manufacturing and restoration, but it has disadvantages like low work efficiency and the frequent replacement of the instrument. That is why a new method of FTAA parts type ''tree'' has been developed called vibratory finishing treatment antifriction without abrasive, (VFTAA method. The study was conducted at the laboratory of the State Technical University of Kirovograd (Ukraine where turn 16K20, the profilograph-profilometer "Talysurf-5", the scanning electron microscope REM-106I, friction machine MI-1M and the stand KI-28097-02M were used respectively for machining, study of micro relief before and after the VFTAA, microstructure, wear resistance and the determination of the break-in period of parts. The results showed that the VFTAA helped reduce the roughness Ra of the samples studied by half compared to the samples processed by polishing and 1.3 times compared to those treated with the FTAA, the break-in period has been reduced four times , this leads to an increase in the life of the hydraulic pump. This technology can be recommended for manufacturing and repair of hydraulic units of agricultural machineries.

  19. STUDY OF THE INTERNATIONALIZATION PROCESS OF A BRAZILIAN COMPANY IN THE AGRICULTURAL MACHINERY AND IMPLEMENTS SECTOR

    Directory of Open Access Journals (Sweden)

    Rozali Araújo Santos

    2012-10-01

    Full Text Available The agribusiness industry and agricultural machinery as well as the internationalization of companies are subjects of growing interest. Thus, a case study of a company in the sector of machinery and implements allowed the analysis of the movements of internationalization under the aspects of strategy, entry mode and challenges of internationalization. The study of the theories and the case study allowed a visualization of their application in practice. The literature review explored the themes internationalization, internationalization strategies, entry modes and challenges of internationalization. The data, qualitative and descriptive, were obtained from semi-structured interviews with the export manager and supplemented by secondary data published on the company’s website. The content analyzes of the data showed that the company is in a primary level of internationalization. However, it also presents strategic orientation toward an internationalization process. The development of this paper can serve as a discussion for further development of internationalization theories and also as a reference in the agribusiness industry to understand this process.

  20. An improvement of agricultural equipment manufacturing by using lean techniques : A case study of agricultural machinery company

    Directory of Open Access Journals (Sweden)

    Nattariya Pakdeepunya

    2015-06-01

    Full Text Available The objective of this research was to study and improve the manufacturing process of agricultural equipment to reduce wastes by using the LEAN tools: a case study of agricultural machinery company. This study found that the main wastes were inefficiency of transportation and working process. The Systematic Layout Planning Pattern (SLP had been applied. Moreover, the principles of ECRS, the change in input factors (a number of employees, together with simulation and the Analysis Hierarchy Process (AHP were also used to determine the appropriate plant layout alternatives by considering the factors such as the productivity, materials handling distance, facilities utilization, and space utilization. The result shared that the best suitable layout is the layout No. 1. Then more improvement the layout No. 1 with the ECRS and the change of input factors (the amount of employees ,it was found that increased productivity by 16.10%, increased facilities utilization by 15.73% and decreased materials handling distance by 48.12%. Furthermore, the number of employees and the average time of workpiece in system could be reduced from 7 to 6 persons, and 54.41 minutes to 45.65 minutes respectively.

  1. POSSIBILITY OF HYDRAULIC FLUIDS WITH A LOW ENVIRONMENTAL IMPACT APPLICATION IN AGRICULTURE AND TRANSPORT MACHINERY

    Directory of Open Access Journals (Sweden)

    Marian Kučera

    2013-12-01

    Full Text Available Agricultural and transport equipment is ideally suited to use hydraulic oils. After engine oils, hydraulic fluids are the second most important group of lubricants. More than 85 % of these materials are currently mineral oil-based. In view of their high ecotoxicity and low biodegradability, mineral oil-based lubricants constitute a considerable threat to the environment. In contrast, most hydraulic fluids based on plant oils have a low environmental impact and are completely biodegradable. Moreover, lubricants based on plant oils display excellent tribological properties and generally have very high viscosity indices and flash points. For this reason, therefore, particularly soybean, sunflower and rapeseed seem to possess the relevant properties as a potential hydraulic fluid. There are several tribotechnical methods how to assess the current technical state of used lubricants (viscosity, water content, flash point, acidity. One of the modern methods how to detect wear particles is LaserNet Fines, which is a suitable technique for machine condition monitoring. The ageing of test oils is analysed by the Fourier transform infrared spectroscopy (FT-IR; for determining anti-wear properties of hydraulic oils, the standard STN EN ISO 20623:2004 indicates 1 hour under an applied load of 150 N. The objective of the paper is to show the description and examples of modern tribotechnical methods used for determination of the technical state of used biolubricants utilized in agriculture and transport machinery.

  2. A new tool for life cycle inventories of agricultural machinery operations

    Directory of Open Access Journals (Sweden)

    Daniela Lovarelli

    2016-03-01

    Full Text Available The interest in environmental assessments about agricultural processes is fast growing and asking for new tools for accurate impact evaluations. The methodology commonly used to go through these studies is the life cycle assessment, of which the inventory phase (life cycle inventory, LCI is an essential step. For studies focusing on agricultural productions, the completion of LCI is particularly complex: taking into account the pedo-climatic and mechanical operative variability is evidently difficult. However, the prediction of the environmental impact of mechanical operations caused by the agricultural sector is essential to quantify the impact categories for which it is responsible. A new tool, ENVIAM, was developed to complete LCI to guarantee the availability of local data that describe the mechanical and pedo-climatic conditions occurring in the Po Valley area and widely applicable as well. It calculates mechanical power requests, directly consumed inputs (i.e., fuel, lubricant and material consumption of a productive system by taking into account soil texture, specific machinery operations and coupling solutions as defined by the user. A subdivision of working time and defined engine load have been considered to calculate fuel consumption; with regard to outputs, exhaust gases emissions from internal combustion engines have been assessed by evaluating the emissive stages of belonging as stated by the EU Directive. A case study was also performed to highlight the differences that occur when an analysis is fulfilled in a context with features different from the average, and resulted in significant variations for the inventory. In more details, a comparison was carried out both with Ecoinvent database and within ENVIAM. With regard to fuel consumption, by changing the soil texture, the analysis showed a range between 64%-184% for sandy and clay soils, respectively, if compared with medium texture ones. With this tool, local contexts defined

  3. 精确农业背景下我国农业机械发展趋势%The Tendency of China's Agricultural Machinery Development Under Precision Agriculture

    Institute of Scientific and Technical Information of China (English)

    段向敏; 代荣

    2013-01-01

    精确农业是世界农业发展的新潮流,是传统农业发展的必然趋势。为此,讲述了我国发展精确农业的必要性,并简单说明了国外智能农业机械的发展现状及趋势;分析了我国精确农业背景下的农业机械化发展存在的问题,对比国外精确农业的发展并结合我国基本国情,对我国新形势下的智能农业机械发展提出意见。%Precision agriculture is the latest trend in contemporary agriculture , precision agriculture also is the inevitable trend of the traditional agricultural .This paper chiefly tells about the necessity of developing precise agriculture in China and current situation and development trend of intelligent agricultural machinery in foreign countries .This paper analyzes the existing problems of developing agricultural mechanization under precision agriculture in China .Comparing with the development of precision agriculture in foreign countries , in addition , considering China ’ s fundamental condition , paper has put forward opinions to develop intelligent agricultural machinery under precise agriculture in China .

  4. Experiences with fuels B30 and B 100 in haulage, railway operation and agricultural machinery

    Energy Technology Data Exchange (ETDEWEB)

    Matejovsky, V. [QMS Consulting, Prague (Czech Republic); Hendrych, K.; Mares, V. [PREOL, Lovosice (Czech Republic)

    2013-06-01

    High prices of diesel fuel have increased an interest in cheaper biodiesel, especially for vehicles with high fuel consumption and not only for haulage vehicle parks but also for railway vehicles and heavy agricultural machinery. When price difference between standard diesel B7 and cheaper biodiesel B100 reached more than 10% it was a sufficient benefit for operators to use biodiesel but this fuel had not been approved for all vehicles types by their manufacturers. Despite this problem, some operators have begun to use biodiesel also for vehicles not having the approval. To prevent operational problems and misgiving of engines damage, the transition to alternative fuel was organized as field tests of one or more vehicles from the operator's fleet. The tests usually started with B30 fuel and if no operational problems occurred the second stage continued with B100. The tested vehicles were under permanent surveillance at least during one year of operation and once a month and later once in a quarter a deeper inspections were made including engine diagnostics, emissions testing, engine oil sampling for laboratory examination, injectors tenting and filters and fuel hoses condition evaluation. The presentation includes the results of vehicles inspections and the measures that had to be done to prevent engines failure and to ensure trouble-free operation of vehicles using biofuels. (orig.)

  5. Agricultural machineries wheeling and soil qualities mapping in climatic changes conditions

    Science.gov (United States)

    Bergonzoli, S.; Servadio, P.

    2012-04-01

    As argued in the Fourth Assessment Report of the UN International Panel on Climate Change (IPCC) published in 2007 the global climate is changing and will continue to change in the near future. Due to the changing in time distribution and intensity of rainfall, the available time to carry out soil tillage operations, seedbed preparation and fertilizers distribution is becoming shorter. These issues are worsened by soil compaction that is one of the major problems facing modern agriculture. Soil compaction impedes infiltration of rainfall, so the increasing scale of mechanization might well be responsible for greater runoff, soil loss by water erosion and water-logging. Overuse of machinery, intensive cropping, short crop rotations, intensive grazing and inappropriate soil management leads to compaction. The objective of this research was to study the compacting effect of two wheeled tractors fitted with different type of tires during fertilizing operations with soil water content over field capacity. Field tests were carried out in a farm near Rome (41°52'502'' Latitude (N); 12°12'866" Longitude (E)) in March 2010 on a clay soil (Vertic Cambisol) during wheat fertilizing. One tractor was fitted with very narrow and high aspect ratio tires with mounted broadcaster coded (WTN), the other tractor was equipped with extra large and low aspect ratio tires with trailed broadcaster for a total of four axles coded (WTEL). Immediately after fertilising operations, such effects have been quantified through spatial variation of some soil parameters: soil water content, soil penetration resistance (CI) and soil shear strength (SS). Soil samplings have been carried out on the tracks left by the tractors and on soil not interested by the passage (control). To monitor all tractors passes across the field and to compute the total area covered by tractors tires a DGPS receiver was placed into the tractors; to map soil parameters studied, both on tracks left by the tractors passes

  6. Accidents with tractors and agricultural machinery in public transport of Republic of Serbia without provinces

    OpenAIRE

    Gliogrevic, Kosta; Oljaca, Mico; Ruzicic, Lazar; Dimitrovski, Zoran

    2012-01-01

    Working processes in agriculture nowadays cannot be imagined without the use of modern agricultural mechanization, especially primary power unit, tractor. Along with the tractor unit development and the benefits induced by its application, according to the author’s research, these machines are one of the main causes of accidents with different types of violations of the participants, and the tragic consequences. The great number of those accidents with tractors and other agricultural machiner...

  7. A new tool for life cycle inventories of agricultural machinery operations

    OpenAIRE

    Daniela Lovarelli; Jacopo Bacenetti; Marco Fiala

    2016-01-01

    The interest in environmental assessments about agricultural processes is fast growing and asking for new tools for accurate impact evaluations. The methodology commonly used to go through these studies is the life cycle assessment, of which the inventory phase (life cycle inventory, LCI) is an essential step. For studies focusing on agricultural productions, the completion of LCI is particularly complex: taking into account the pedo-climatic and mechanical operative variability is evidently ...

  8. Vibro-acoustic analysis procedures for the evaluation of the sound insulation characteristics of agricultural machinery cabins

    Science.gov (United States)

    Desmet, W.; Pluymers, B.; Sas, P.

    2003-09-01

    Over the last few years, customer demands regarding acoustic performance, along with the tightening of legal regulations on noise emission levels and human exposure to noise, have made the noise and vibration properties into important design criteria for agricultural machinery cabins. In this framework, both experimental analysis procedures for prototype testing as well as reliable numerical prediction tools for early design assessment are compulsory for an efficient optimization of the cabin noise and vibration comfort. This paper discusses several numerical approaches, which are based on the finite element and boundary element method, in terms of their practical use for airborne sound insulation predictions. To illustrate the efficiency and reliability of the various vibro-acoustic analysis procedures, the numerical procedures are applied for the case of a harvester driver's cabin and validated with experimental results.

  9. Survey of Agricultural Machinery Service Quality after Sales in Liaoning%辽宁省农机售后服务质量调查分析

    Institute of Scientific and Technical Information of China (English)

    李哲

    2015-01-01

    为了解辽宁省农机售后服务质量现状,对全省部分列入农机补贴的农机产品进行售后服务质量调查。根据调查结果,总结农机售后服务中存在的主要问题及成因,提出有针对性的改进建议,为提高全省农机售后服务质量提供参考。%The article is the investigation of service quality after sales for agricultural machinery products partly listed in agricultural subsidies in the whole province based on the status of agricultural machinery service quality after sales in Liaoning province. According to the result, the article summarized the main problems and causes existing in agricultural machinery service after sales, offered relative suggestions for the improvement, and provided a reference for improving the service quality after sales of agricultural machinery in the whole province.

  10. CHALLENGES AND TECHNICAL SOLUTIONS OF USING HIGH-PERFORMANCE TRANSPORT OF AGRICULTURAL MACHINERY

    Directory of Open Access Journals (Sweden)

    Popov A. S.

    2015-12-01

    Full Text Available Material and technical resources form a large part of the costs in agricultural production and determine the level of intensity of agriculture, productivity and competitiveness of the industry. The most important role in agricultural production is played by transport operation, from productivity and quality of which directly depends the volume and the grade of final products. More preferable is tractor transport, particularly for on-farm transport, taking into account the impact of navigation systems on the ground. Continuous growth in the saturation of tractors carried out around the world, improves the performance of tractor transport aggregate by increasing their capacity and speed, either on the road or in the field. However, if you increase the saturation of tractors, it encounters problems related to the deterioration of the controllability of the tractor and transport unit. The reduced controllability leads to an increase of damage to transported agricultural products owing to increased oscillatory processes in the system of "road – trailer – tractor – operator" when driving on-farm trails, deteriorating the smoothness and braking properties. Especially sharp these questions relate to transportation of easy-to-damage agricultural products at farm transportation. The feature of data traffic lies in the sharp drop in grade products (products receive numerous mechanical damages, deteriorating its quality, and lose marketability and accordingly reduced its cost. Influence on fruit and vegetable products of unfavorable factors can lead not only to a dramatic loss of quality at the time of transportation, but also reduce the resistance during further storage. To solve the problems emerging when increasing the saturation of tractors, we have proposed devices, allowing reducing negative impact on the production of elevated oscillatory processes, to increase the permeability and straightness of movement of tractor-transport unit

  11. Innovation in agricultural machinery: Analysis of two examples for the reduction of pesticides

    OpenAIRE

    Wermeille, A.; Berducat, M.; Chanet, J.P.; Didelot, D.

    2013-01-01

    One of the main challenges for today's agricultural engineering and science in Europe is to boost concrete and successful innovation to produce more and, at the same time, in a more sustainable way. ICT and new intelligent systems such as robotics have a great potential to meet these challenges, as recognized by European and national agenda and policies. However, the innovation process is a complex process which often fails to reach the market, regardless of the potential of the technology us...

  12. The accuracy of farm machinery for precision agriculture: a case for fertilizer application.

    OpenAIRE

    Goense, D.

    1997-01-01

    Work quality, capacity and reliability are important criteria for design and evaluation of farm equipment. With the introduction of precision agriculture, the ability to adapt to spatially variable soil and crop conditions, becomes an additional aspect. A calculation method was developed to find the precision of site specific fertilizer application. The variance between the required rate, RR, and the applied rate, AR, was used as a measure for precision. The theory of geo-statistics was used ...

  13. A fuel consumption model for off-road use of mobile machinery in agriculture

    International Nuclear Information System (INIS)

    Until 2009, the annual reporting of emissions by off-road transport in agriculture in Belgium was based on a 1994 calculation model that needed to be updated. An energy consumption model was established for plant production in Belgium as a backbone for a new emission model. The model starts from agricultural activities involving off-road fuel consumption. Effects of soil type, tractor size, field size and machine load are modelled. Twenty-seven FCIs (fuel consumption indicators) were computed for plant production. FCIs are expressed per year and are used for emission estimates on a regional level. FCIs ranged from 37 to 311 L/ha. Sensitivity analysis showed the highest impact of tractor size with a surplus fuel consumption between 10 and 41% depending on the crop type. Fuel consumption (L) can be further processed into greenhouse gas emissions. FCIs can be adopted in LCA (life cycle assessment) studies. With ∼310 L/ha, orchards are most fuel intensive, followed by field vegetables and sugar beets (∼150 L/ha). The total off-road energy consumption of field vegetables is high because second cropping is a common practice. - Highlights: • An energy consumption model is proposed that is based on farming activities. • No statistical data on fuel consumption are required for the calculation. • The published FCIs can be adopted in LCA studies directly or as an allocation key

  14. Thought on the Development of Agricultural Machinery Professional Cooperatives in Liaoning%辽宁省农机专业合作社发展思考

    Institute of Scientific and Technical Information of China (English)

    王晓霞

    2011-01-01

    作为农民专业合作社的重要组成部分,农机专业合作社是农业现代化的内在需要和必然选择。简单介绍辽宁省农机专业合作组织的发展现状、特点及制约其发展的主要问题,并提出切实可行的解决策略。%As a major part of professional cooperatives for farmers, the growth of agricultural machinery cooperatives is a necessity for agricultural modernization. This article examines the development professional agricultural machinery cooperatives, its features, as well as the bottlenecks to its growth. Accordingly, the author puts forward measures to deal with these problems.

  15. Agricultural Machinery Current Situation and Future Development Trends%农业机械用具使用现状及未来发展趋势

    Institute of Scientific and Technical Information of China (English)

    杨业; 田静宜

    2013-01-01

    Lulong County, for example, through the investigation of farm machinery types, farm machinery inputs, farm machinery use efficien⁃cy and fault rate, grasp the Agricultural Mechanization status quo of the region. After further excavation of the existing problems, the corre⁃sponding measures and the development trend of farm machinery are proposed, thereby the degree of agricultural mechanization , economic ef⁃ficiency , and the lives of farmers can be improved.%  以卢龙县为例,通过调查农机具种类、农机具投入、农机具使用效率和故障率等方面内容,了解该地区农机化现状,进一步查找存在的问题,提出相应措施,从而提高农机化程度,增加经济效益,改善农民生活。

  16. Characteristics and Development Trend of Green Manufacturing of Agricultural Machinery%农业机械绿色制造的特点及发展趋势

    Institute of Scientific and Technical Information of China (English)

    曹兴乔

    2012-01-01

    This article explores the connotation,research focus and integrated features of green manufacturing in a bid to realize coordinated development.A new research philosophy of modern agricultural machinery is put forward.The features of China's agricultural machinery manufacturing are reviewed.The development trend in this area is highlighted on the basis of review of the present state of overseas and domestic agricultural machinery manufacturing.%为实现经济效益和环境保护的协调发展,剖析绿色制造的内涵、研究热点及集成特性,构建新的现代农业机械研制理念,总结我国农业机械制造领域的特点。根据国内外农业机械制造现状,展望现代农业机械绿色制造的发展趋势。

  17. 加强农业机械推广应用的措施%Measures to strengthen the promotion of agricultural machinery applications

    Institute of Scientific and Technical Information of China (English)

    毛卫荣

    2013-01-01

      在现代农业生产中,农用新技术、新机具是改善农业生产条件,实现农业现代化的重要组成部分。农村农业机械的推广应用是传统农业向现代农业过渡的基础,是农业现代化进程中不可逾越的一道鸿沟,是解决三农问题,提高农村劳动力的利用效率,解决农村外出务工人员的后顾之忧,提高农民的生活水平的有力举措。全球农业现代化的发展进程中总结的经验也告诉我们:只有农业的机械化达到了一定的阶段和水平,才能说农业实现了现代化。帮助农村推广农用新技术、新机械,在积极推动机械化进程的同时,也注意用先进的农业技术改造农业。改变农业的薄弱基础性地位,用先进的机械化武装农业,帮助农民增产增收,从而缩小城乡差距,加快城市化发展进程,解决农业、农村、农民的问题,为建设社会主义新农村事业提供坚实的物质基础。%  In the modern agricultural production, agricultural technology, new machinery to improve agricultural pro-duction conditions, an important part of the modernization of agriculture. Popularization and application of agricultural ma-chinery in rural areas is the basis of the transition from traditional agriculture to modern agriculture, is a gulf impassable in the process of agricultural modernization, is the solution to the three rural issues, improve the efficiency in the use of the rural labor force to solve the worries of rural migrant workers, improving their a powerful measure of the standard of living. The lessons learned in the global development of agricultural modernization process also tells us: Only the mecha-nization of agriculture has reached a certain stage and level, to modern agriculture. Help rural areas to promote new agri-cultural technology, new machinery, and actively promote the mechanization process, but also pay attention to the use of advanced

  18. 我国农业机械化演进轨迹与或然走向%Evolution and Probable Trends of Agricultural Machinery in China

    Institute of Scientific and Technical Information of China (English)

    王波; 李伟

    2012-01-01

    基于诱致性技术变迁的视角,运用1990~2009年时间序列数据分析农村居民的工资性收入对农户采用农业机械决策的影响。结果表明,工资性收入对农户采用农业机械的决策具有显著效应,工资性收入增加,农业机械采用水平也会增加。20世纪90年代以来我国农业机械使用水平的大幅上升主要是因为农业劳动力相对稀缺导致的,因此要改变优先发展农业生物化学技术的观点,而应注重农业机械技术与生物化学技术并重发展。%This article uses the change of rural residents ' wage income to measure the opportunity cost of the labor factor in agricultural production,and based on the Perspective of induced technological innovation hypotheses,analyzed the effect of the wage income of rural residents on the adoption of agricultural machinery using the 1990-2009 time series data.The result shows that the wage income has a significant effect on the adoption of agricultural machinery.With the increase of wage income,agricultural machinery's adoption level will increase.This article derives an important conclusion that the sharply rise of agricultural machinery's adoption since the 1990s in China is mainly caused by the relative scarcity of agricultural labor,so we should change the view of the priority to the development of agricultural biochemistry,but focus on the simultaneous development of agricultural machinery and biochemistry.

  19. Strategies for Improving Enterprise Standardization Management of Tropical Crop Machinery

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ There are two categories of tropical crop machinery. One comprises operation machinery that is used for planting, managing and harvesting tropical crops, while the other comprises process machinery for processing tropical crops. Tropical crop machinery is distinguished from other agricultural machinery by the special crops that such machinery cultivates and processes.

  20. POLISH FARM MACHINERY MARKET AFTER ACCESSION TO THE EUROPEAN UNION – PRICES OF MEANS OF AGRICULTURAL MECHANIZATION

    Directory of Open Access Journals (Sweden)

    Jan Pawlak

    2014-12-01

    Full Text Available VAT for farm machinery has been increased from 0 to 22% level since the accession to the EU. This was a main reason for rise in prices of a set of 34 farm machines which in June 2004 was by 28.1% higher than a year earlier. Thanks to the decrease in prices of the most expensive farm machines – harvester threshers, during the years 2006--2009 the price level was quite stable, even though prices of most machines rose. From 2010 moderate, but generally higher than the inflation rate rise in price of the set was observed. During the years 2003-2013 the price of the set of 34 farm machines grew more expensive by 66.7%, whilst the inflation index increased by 32.6%. In 2004, 2005, 2010 and 2013 the rate of increase of prices of farm machines was higher than dynamics of the inflation index (relatively by 16.8, 15.5, 3.5 and 3.1 per cent points. In spite of machinery price growth, the equivalent of the set of 34 machines in form of mass or volume of swine and cattle for slaughter, wheat, milk and potato was in 2013 by 1.0 to 33.3% lower than in 2003. The above mentioned set as related to the unit of mass of rye and sugar beet was by 4.1 and 40.3% more expensive.

  1. 浅析我国农业机械售后服务标准体系建设%A Brief Analysis on Construction of the Standards System of Agricultural Machinery After-sales Service in China

    Institute of Scientific and Technical Information of China (English)

    韩址楠; 黎燕; 安洁; 李倩; 云振宇

    2016-01-01

    This paper elaborates the present situation of standardization in agricultural machinery after-sales service in China, proposes the framework and content of the standards system of agricultural machinery after-sales service based on the characteristics of after-sales service and customer demand, in order to use standardized means to enhance the agricultural machinery after-sales service.%本文通过阐述我国农业机械售后服务标准化的现状,基于售后服务特点和顾客需求,提出了农业机械售后服务标准体系的框架及其内容,以期运用标准化手段提升农业机械售后服务水平。

  2. 农机购置补贴政策下种稻大户购机决策影响因素分析%Analysis of Influential Factors for Big Grain Households' Purchase of Agricultural Machinery:Under the Subsidy Policy for Purchasing Agricultural Machinery

    Institute of Scientific and Technical Information of China (English)

    颜玄洲; 孙水鹅; 欧一智

    2015-01-01

    Agricultural machinery is an essential material condition for high and stable yield in agricultural production.The importance of promoting development of agricultural mechanization has been mentioned for sever-al times in the Central Committee's Document No.1 in recent years.Starting with theory of demand,this paper is designated to analyze the influential element on big grain households' purchasing machinery from both macro and micro perspectives in order to find out both macro and micro factors influencing their decision-making. So as to further verify the influential factors on big grain households' purchasing behavior,the paper then investigates 397 big grain households'sample data in Jiangxi Province by means of logistic regression models in SPSS19.0.Empir-ical study shows that planting scale,policy cognition,financing capacity,and household type have a significant influence on big grain households' purchasing agricultural machinery. And this provides a helpful instruction on how subsidy policy for purchasing machinery can be better implemented in Jiangxi Province.%农业机械是农业生产获得高产、稳产的必要物质条件,近年来中央一号文件多次提出要提高农业机械化水平. 本文从需求理论出发,从宏观和微观两方面分析江西省种稻大户购置农机的影响,从而提炼出影响种稻大户购机决策的宏观因素和微观因素,为证实在农机购置补贴政策下种稻大户购机决策的影响因素,本文利用江西省实地调查的397个种稻大户样本数据,运用SPSS19.0软件对样本进行logistic模型回归. 实证结果表明年龄、教育程度、农户类型、种植规模、政策认知、农业收入、融资能力等对于大户购置农机决策存在显著影响,进而为农机购置补贴政策更好的在江西省实施提出相应的启示.

  3. Study on Coordination Optimization Model and System Analysis of Agricultural Machinery Supporting Service%农机配套服务的系统分析和协调优化模型研究

    Institute of Scientific and Technical Information of China (English)

    于晓秋; 冷志杰

    2013-01-01

    This paper,base on the definition of agricultural machinery service.Firstly,it analyzes systematically influence factors of agricultural machinery supporting services.Take data of farm machinery and grain yield and so on of Heilongjiang reclamation 51 farms near 10 year as the examples,use correlation analysis and establishes the most superior model,the result indicates correlation coefficient absolute value existences drop tendency between a complete set and the grain yield year by year in the Heilongjiang reclamation area farm machinery at present.Take the data of a Seven Star farm near 10 year as the example,we find there is closer relevance between the small agricultural machinery tools and the grain yield.The large and middle scale tractor agricultural machinery tools indicates the remarkable role to the grain yield by using the most superior regression model.Finally,satisfied condition of decision variables are determined by establishing and the analyzing coordinated optimization model of farm machinery necessary service.It has the vital significance in order to advance the agricultural machinery supporting serve.%在界定农机配套服务的基础上,首先系统分析了农机配套服务的影响因素,以黑龙江垦区51个农场近10年农机和粮食产量等数据为例,采用相关分析、建立最优模型等方法知目前黑龙江垦区农机配套比与粮食单产相关系数的绝对值存在逐年减少趋势.再以七星农场近10年数据为例知小型农机具配套比与粮食产量相关性最密切,而利用建立最优回归模型揭示大中型拖拉机配套农机具对粮食产量起到显著作用.最后建立和分析农机配套服务的协调优化模型,确定了决策变量的满足条件,为推进农机配套服务具有重要意义.

  4. Fusion Machinery

    DEFF Research Database (Denmark)

    Sørensen, Jakob Balslev; Milosevic, Ira

    2015-01-01

    SNARE proteins constitute the minimal machinery needed for membrane fusion. SNAREs operate by forming a complex, which pulls the lipid bilayers into close contact and provides the mechanical force needed for lipid bilayer fusion. At the chemical synapse, SNARE-complex formation between the vesicu......SNARE proteins constitute the minimal machinery needed for membrane fusion. SNAREs operate by forming a complex, which pulls the lipid bilayers into close contact and provides the mechanical force needed for lipid bilayer fusion. At the chemical synapse, SNARE-complex formation between...

  5. Wi-Fi and Satellite-Based Location Techniques for Intelligent Agricultural Machinery Controlled by a Human Operator

    Directory of Open Access Journals (Sweden)

    Domagoj Drenjanac

    2014-10-01

    Full Text Available In the new agricultural scenarios, the interaction between autonomous tractors and a human operator is important when they jointly perform a task. Obtaining and exchanging accurate localization information between autonomous tractors and the human operator, working as a team, is a critical to maintaining safety, synchronization, and efficiency during the execution of a mission. An advanced localization system for both entities involved in the joint work, i.e., the autonomous tractors and the human operator, provides a basis for meeting the task requirements. In this paper, different localization techniques for a human operator and an autonomous tractor in a field environment were tested. First, we compared the localization performances of two global navigation satellite systems’ (GNSS receivers carried by the human operator: (1 an internal GNSS receiver built into a handheld device; and (2 an external DGNSS receiver with centimeter-level accuracy. To investigate autonomous tractor localization, a real-time kinematic (RTK-based localization system installed on autonomous tractor developed for agricultural applications was evaluated. Finally, a hybrid localization approach, which combines distance estimates obtained using a wireless scheme with the position of an autonomous tractor obtained using an RTK-GNSS system, is proposed. The hybrid solution is intended for user localization in unstructured environments in which the GNSS signal is obstructed. The hybrid localization approach has two components: (1 a localization algorithm based on the received signal strength indication (RSSI from the wireless environment; and (2 the acquisition of the tractor RTK coordinates when the human operator is near the tractor. In five RSSI tests, the best result achieved was an average localization error of 4 m. In tests of real-time position correction between rows, RMS error of 2.4 cm demonstrated that the passes were straight, as was desired for the

  6. Wi-Fi and Satellite-Based Location Techniques for Intelligent Agricultural Machinery Controlled by a Human Operator

    Science.gov (United States)

    Drenjanac, Domagoj; Tomic, Slobodanka; Agüera, Juan; Perez-Ruiz, Manuel

    2014-01-01

    In the new agricultural scenarios, the interaction between autonomous tractors and a human operator is important when they jointly perform a task. Obtaining and exchanging accurate localization information between autonomous tractors and the human operator, working as a team, is a critical to maintaining safety, synchronization, and efficiency during the execution of a mission. An advanced localization system for both entities involved in the joint work, i.e., the autonomous tractors and the human operator, provides a basis for meeting the task requirements. In this paper, different localization techniques for a human operator and an autonomous tractor in a field environment were tested. First, we compared the localization performances of two global navigation satellite systems’ (GNSS) receivers carried by the human operator: (1) an internal GNSS receiver built into a handheld device; and (2) an external DGNSS receiver with centimeter-level accuracy. To investigate autonomous tractor localization, a real-time kinematic (RTK)-based localization system installed on autonomous tractor developed for agricultural applications was evaluated. Finally, a hybrid localization approach, which combines distance estimates obtained using a wireless scheme with the position of an autonomous tractor obtained using an RTK-GNSS system, is proposed. The hybrid solution is intended for user localization in unstructured environments in which the GNSS signal is obstructed. The hybrid localization approach has two components: (1) a localization algorithm based on the received signal strength indication (RSSI) from the wireless environment; and (2) the acquisition of the tractor RTK coordinates when the human operator is near the tractor. In five RSSI tests, the best result achieved was an average localization error of 4 m. In tests of real-time position correction between rows, RMS error of 2.4 cm demonstrated that the passes were straight, as was desired for the autonomous tractor

  7. Analysis of the Total Power of Agricultural Machinery and Influencing Factors in Jilin Province%吉林省农业机械总动力及其影响因素分析

    Institute of Scientific and Technical Information of China (English)

    崔红艳

    2015-01-01

    农业机械化是农业现代化的重要标志,吉林省作为粮食大省,农业机械化的发展至关重要。为此,运用吉林省1987-2012年的相关数据,对吉林省农业机械总动力及其影响因素进行多元线性回归分析,建立了回归模型。结果表明:在其他变量保持不变的情况下,农村居民家庭恩格尔系数每降低1%,农机总动力就增加0.5947%;农村劳动力转移率每增加1%,农机总动力就增加0.5155%;农民家庭年纯收入每增加1%,农机总动力就增加0.1248%;农业财政支出每增加1%,农机总动力就增加0.0936%;人均耕地面积每增加1%,农机总动力就增加0.0064%。未来吉林省要充分重视这5个主要因素,从提高农民对农机的内在需求和加强政府扶持等外部环境两大方面促进农业机械化的发展。另外,需要加强对新型职业农民的培育,以适应新时期农机发展对人才与科技的需求。%Agricultural Mechanization is an important symbol of the modernization of agriculture .As the food great province, it is very crucial to the development of agricultural mechanization in Jilin Province .This paper analyzes the to-tal power of agricultural machinery and the influence factors by multiple linear regression analysis , using the relevant data of Jilin Province during 1987-2012 .The regression model is established .The results show that , in the case of other vari-ables remain the same , with the Engel coefficient of rural decreasing 1%, the number of agricultural machinery total power is increased by 0 .594 7%;with rural labor force transfer rate increasing 1%, the number of total power of agricul-tural machinery is increased by 0 .515 5%;with the family net income of farmers every year increasing 1%, the number of agricultural machinery total power is increased by 0 .124 8%; with agricultural fiscal expenditure increasing by 1%, the number of agricultural

  8. Obligations at selling agricultural machinery

    OpenAIRE

    KOCMICH, Tomáš

    2007-01-01

    I theoretical part I deal with the establishment, termination and securing of obligations and further with purchase contracts and leasing. After that I continue with practical part, in which I describe selected companies, I compare their purchase contracts and I investigate their accordance to business law.

  9. Research Advances in the Key Technology of Bionic Configuration Design of Agricultural Machinery%农机产品仿生配置设计的关键技术研究进展

    Institute of Scientific and Technical Information of China (English)

    屠立; 裘乐淼

    2012-01-01

    The aim of the configuration design of agricultural machinery was to improve the products design efficiency. The research status a-bout the configuration design technologies both at home and abroad was introduced, and the configuration model and case-based reuse technique of agricultural machineries were summarized, finally its existing problems and future research direction were pointed out. It was concluded that the bionic configuration technology has become a main research direction of machinery design methods, and the technical research framework of the bionic configuration design was presented.%农机产品配置设计的目的是为了提高产品设计效率.介绍了国内外学者对配置设计技术的研究现状,对提出的农机产品配置建模与实例重用技术进行了总结,并指出了现存问题和下一步研究方向.认为仿生配置设计技术已成为目前国内外机具产品设计方法研究的主要趋向,并给出了农机产品的仿生配置设计技术研究框架.

  10. A Comparative Study on Chinese and Foreign Facilities of Agricultural Machinery and Operation Equipments%中外设施农业机械及作业装备的比较研究

    Institute of Scientific and Technical Information of China (English)

    赵东; 刘永超; 罗维飞

    2014-01-01

    With more than 20 years of development, significant progress has been made in national agricultural infrastructure , but compared with the advanced agricultural machinery in foreign countries,there is still a large gap, both the yield of the comprehensive benefit and the comprehensive research level of single or comprehensive technology, are far behind Japan, Netherlands and South Korea and other developed countries. How to fully digest other countries' experience, introduce advanced scientific and technological achievements at home and abroad, improve the overall level of agricultural machinery in our country, is a quite important step for our country to transform from a big agricultural country to a powerful one.%经过二十多年的发展,我国的农业设施虽然取得了显著的进步,但是和国外先进的农业机械设备相比还是存在着很大的差距,无论是综合效益的发挥,还是单项或者综合技术的研究水平,都远远落后于日本、荷兰以及韩国等发达国家。如何充分的吸引他国经验,引进国内外先进科技成果,提高我国农业机械的整体水平,是我国从农业大国转变为农业强国的重要一步。

  11. The local scale, from the periphery. An analysis of the agriculture machinery industry in Las Parejas (province of Santa Fe, Argentina, in connection withits its context in the Argentine economy

    Directory of Open Access Journals (Sweden)

    Patricio Narodowski

    2007-01-01

    Full Text Available This paper looks into the possibilities that local development strategies inspired in the reality of European countries may be applied to peripheral countries such as Argentina. A difference is made between a global/national context and a local one. the analysis takes into account geographical, sociological and economic discourses which, considering the Italian and French experience, among others, relativize the national scale as the axis of analysis and focus on the local birth as scale of reference. The agricultural machinery businesses of Las Parejas, in the province of Santa Fe, are used to exemplify how a medium-sized city can generate associative projects which help actors to deal with the context, though this is still a business performance and local productive networks life variable.

  12. 农业机械可靠性试验远程监控系统的开发%Development and application of agricultural machinery reliability test remote monitoring system

    Institute of Scientific and Technical Information of China (English)

    吴英满; 叶长青; 汤治明

    2014-01-01

    文章研究的目的是解决目前在农机可靠性鉴定过程中对行驶里程统计、作业面积统计、故障现场回报、自动留存相关数据等需要,通过开发出国内领先、具有自主知识产权软硬件平台系统,将GPS、GSM 和油耗记录仪等技术结合在一起,实现数据的实时回传、监控、分析、统计等功能,并采用基于B/S结构设计数据库平台,集成了谷哥地图和百度地图,采用平面地图或卫星地图浏览方式,建立一个实时在线监控且可视化的无人实时监督记录的农用机械可靠性试验平台,系统服务平台能为农机试验鉴定提供科学的,透明的数据,保证了农机试验鉴定科学、公开、公正的工作原则。%The purpose of this study is to solve the reliability of the identification process of agricultural machinery on mileage statistics, the operating area statistics, fault-site returns, automatic data retention issues. By developing domestic leading, with independent intellectual property rights of software and hardware platform system, put GPS, GSM and fuel consumption recorder technology together, realize the data real-time back, monitoring, analysis and statistics. And the database platform based on B/S structure design. Integrated Columbia Valley maps and Baidu maps, using planar maps or satellite map browsing mode. Build a real-time online monitoring and real-time visualization of unmanned supervision of agricultural machinery reliability test recording platform. System service platform to provide scientific, transparent data to identify agricultural experiment. Ensure the identification of agricultural science , open, fair working principles.

  13. Gender Machineries Worldwide

    OpenAIRE

    McBride, Dorothy; Mazur, Amy

    2012-01-01

    The term gender machineries usually refers to formal government structures assigned to promote gender equality and/or improve the status and rights of women. Examining these structures in many countries around the world shows that in practice the machineries take a wide variety of forms, from formal ministries to temporary councils and committees. They may be established by formal statute, executive decree, or bureaucratic rules, or there may be machineries in political parties that have a wi...

  14. 基于改进Huffman编码的农机作业数据传输压缩方法%Improved Huffman coding-based data transmission and compression method for agricultural machinery operation

    Institute of Scientific and Technical Information of China (English)

    杨敬锋; 张南峰; 李勇; 薛月菊; 吕伟; 何堃

    2014-01-01

    为解决通讯环境较差的农业机械作业状态数据的传输难题,该文提出了基于改进Huffman编码技术的数据压缩方法实现数据的压缩、传输、解析与解压。数据压缩与解压测试的结果表明,数据采集周期为5 s、数据长度为918.38 kb时,基于改进Huffman算法压缩的数据长度为412.56 kb,同样条件下对比传统Huffman算法压缩的数据长度498.56 kb小86 kb,压缩率从传统Huffman算法的45.71%提升至改进Huffman算法的55.08%;传统Huffman算法中数据传输出错率和数据传输丢包率为2.47%和4.18%,而在同样传输要求下的筛选压缩传输中数据传输出错率和数据传输丢包率降至2.06%和0.78%。该方法能满足农业机械作业状态数据压缩传输要求,在单个数据包数据较少、传输时间短的压缩传输方式下能够获得较低的传输出错率和丢包率,且该方法具有计算量少、压缩效率较高特点,适合在农业机械作业区域进行数据传输。%In order to solve the poor communication environment problem of agricultural machinery operation state data transmission caused by the unbalanced coverage of a mobile communication base station, a data filtering and data compression method based on an improved Huffman coding technique was proposed for data selecting, compression, transmission, parsing, and extracting in this paper. First, the agricultural machinery operation data types, exchange mode, and compression mode were defined. Then, data collection and exchange were realized based on a Compass/GPS dual-mode state data collection terminal. Finally, an improved Huffman coding technique was proposed. At present, most of the data transmission is using a compression-decompression method to ensure data integrity of data transmission, which can reduce the data traffic and save many communication costs, but its disadvantages are also obvious. The disadvantages are fewer on the terminal in the data

  15. Improved Huffman coding-based data transmission and compression method for agricultural machinery operation%基于改进Huffman编码的农机作业数据传输压缩方法

    Institute of Scientific and Technical Information of China (English)

    杨敬锋; 张南峰; 李勇; 薛月菊; 吕伟; 何堃

    2014-01-01

    为解决通讯环境较差的农业机械作业状态数据的传输难题,该文提出了基于改进Huffman编码技术的数据压缩方法实现数据的压缩、传输、解析与解压。数据压缩与解压测试的结果表明,数据采集周期为5 s、数据长度为918.38 kb时,基于改进Huffman算法压缩的数据长度为412.56 kb,同样条件下对比传统Huffman算法压缩的数据长度498.56 kb小86 kb,压缩率从传统Huffman算法的45.71%提升至改进Huffman算法的55.08%;传统Huffman算法中数据传输出错率和数据传输丢包率为2.47%和4.18%,而在同样传输要求下的筛选压缩传输中数据传输出错率和数据传输丢包率降至2.06%和0.78%。该方法能满足农业机械作业状态数据压缩传输要求,在单个数据包数据较少、传输时间短的压缩传输方式下能够获得较低的传输出错率和丢包率,且该方法具有计算量少、压缩效率较高特点,适合在农业机械作业区域进行数据传输。%In order to solve the poor communication environment problem of agricultural machinery operation state data transmission caused by the unbalanced coverage of a mobile communication base station, a data filtering and data compression method based on an improved Huffman coding technique was proposed for data selecting, compression, transmission, parsing, and extracting in this paper. First, the agricultural machinery operation data types, exchange mode, and compression mode were defined. Then, data collection and exchange were realized based on a Compass/GPS dual-mode state data collection terminal. Finally, an improved Huffman coding technique was proposed. At present, most of the data transmission is using a compression-decompression method to ensure data integrity of data transmission, which can reduce the data traffic and save many communication costs, but its disadvantages are also obvious. The disadvantages are fewer on the terminal in the data

  16. Import of textile machinery

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In 2007,the total importation of our textile machinery amounts to US$4.948 billion,increased by 20.62%over the same period of the previous year,which turns out to be a new high in the year of textile machinery.Among the imported produc ts in 2007,different impor ted produc ts witness growths of various degrees. The large-scale impor t increase of tex tile machiner y indicates the acceleration of textile technology and upgrading of textile industry,and demonstrates that our textile machinery industry still keeps distance from the international advanced technology in terms of product level,product stability as well as the product reliability although the rapid improvement was made in manufacturing in Chinese textile machinery industry in the last few years.In addition,the possibility of RMB appreciation still exists.Import increase of textile machinery brings a new historical high in 2007.

  17. Energy efficiency procedures for agricultural machinery used in onion cultivation (Allium fistulosum) as an alternative to reduce carbon emissions under the clean development mechanism at Aquitania (Colombia)

    International Nuclear Information System (INIS)

    Climate change has both causes and consequences over agriculture. This paper focuses on the first element and presents scenarios for ASOLAGO -an onion cropper's association in Colombia with 250 members- to reduce their carbon footprint. It evaluates a case study at ''La Primavera'' farm using a methodology approved by the United Nations Framework Convention on Climate Change. Land preparation and crop irrigation were analyzed as stages in order to propose energy efficiency alternatives for both the farm and the association. They include field efficiency, fuel economy and energy efficiency from biofuels for the first stage as well as solar and wind energy supply for the second. A cost-benefit analysis to generate additional income selling additional power produced by the system to the National Grid was done

  18. Energy efficiency procedures for agricultural machinery used in onion cultivation (Allium fistulosum) as an alternative to reduce carbon emissions under the clean development mechanism at Aquitania (Colombia)

    Science.gov (United States)

    Ochoa, K.; Carrillo, S.; Gutierrez, L.

    2014-06-01

    Climate change has both causes and consequences over agriculture. This paper focuses on the first element and presents scenarios for ASOLAGO -an onion cropper's association in Colombia with 250 members- to reduce their carbon footprint. It evaluates a case study at "La Primavera" farm using a methodology approved by the United Nations Framework Convention on Climate Change. Land preparation and crop irrigation were analyzed as stages in order to propose energy efficiency alternatives for both the farm and the association. They include field efficiency, fuel economy and energy efficiency from biofuels for the first stage as well as solar and wind energy supply for the second. A cost-benefit analysis to generate additional income selling additional power produced by the system to the National Grid was done.

  19. Agriculture

    International Nuclear Information System (INIS)

    The report entitled Climate Change Impacts and Adaptation : A Canadian Perspective, presents a summary of research regarding the impacts of climate change on key sectors over the past five years as it relates to Canada. This chapter on agriculture describes how climate change will affect primary agriculture production in Canada with particular focus on potential adaptation options, and vulnerability of agriculture at the farm level. Agriculture is a vital part of the Canadian economy, although only 7 per cent of Canada's land mass is used for agricultural purposes due to the limitations of climate and soils. Most parts of Canada are expected to experience warmer conditions, longer frost-free seasons and increased evapotranspiration. The impacts of these changes on agriculture will vary depending on precipitation changes, soil conditions, and land use. Northern regions may benefit from longer farming seasons, but poor soil conditions will limit the northward expansion of agricultural crops. Some of the negative impacts associated with climate change on agriculture include increased droughts, changes in pest and pathogen outbreaks, and moisture stress. In general, it is expected that the positive and negative impacts of climate change would offset each other. 74 refs., 2 tabs., 1 fig

  20. Machinery Market Heats Up

    Institute of Scientific and Technical Information of China (English)

    JADEFU

    2004-01-01

    In late June, the buzz amongst Chinese machinery manufacturers was that the country's top construction equipment producer, Xuzhou Construction Machinerv Group (XCMG), was to be sold. XCMG's holding company, the Shenzhen-listed Xugong

  1. Cavitation in Hydraulic Machinery

    Energy Technology Data Exchange (ETDEWEB)

    Kjeldsen, M.

    1996-11-01

    The main purpose of this doctoral thesis on cavitation in hydraulic machinery is to change focus towards the coupling of non-stationary flow phenomena and cavitation. It is argued that, in addition to turbulence, superimposed sound pressure fluctuations can have a major impact on cavitation and lead to particularly severe erosion. For the design of hydraulic devices this finding may indicate how to further limit the cavitation problems. Chapter 1 reviews cavitation in general in the context of hydraulic machinery, emphasizing the initial cavitation event and the role of the water quality. Chapter 2 discusses the existence of pressure fluctuations for situations common in such machinery. Chapter 3 on cavitation dynamics presents an algorithm for calculating the nucleation of a cavity cluster. Chapter 4 describes the equipment used in this work. 53 refs., 55 figs.,10 tabs.

  2. Bacterial mitotic machineries

    DEFF Research Database (Denmark)

    Gerdes, Kenn; Møller-Jensen, Jakob; Ebersbach, Gitte;

    2004-01-01

    Here, we review recent progress that yields fundamental new insight into the molecular mechanisms behind plasmid and chromosome segregation in prokaryotic cells. In particular, we describe how prokaryotic actin homologs form mitotic machineries that segregate DNA before cell division. Thus, the P...

  3. Export of textile machinery products

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In 2007, the export of textile machinery products continued to keep a rapidly increasing trend. In accordance with the statistics from the custom, as of December this year, the value of exported textile machinery products was USD1.528 billion, increased by 23.54% over the previous year. Except that the export of nonwoven cloth machinery products reduced to a certain degree compared with that in 2006, the export of other varieties of products increased greatly. The export of textile machinery products had been remaining relatively rapid growth since 2000. During this period, the structure of exported products has changed continuously, so do export enterprises. There are still many problems in export of textile machinery products, and manufacturers of textile machinery products should improve and advance continuously. However, on the whole, the integrated and international competitiveness of textile machinery products is enhanced, so is the internationalization level of manufacturers of textile machinery products.

  4. Fatores críticos de sucesso em projetos colaborativos na indústria de máquinas agrícolas Critical success factors in collaborative projects in industry of agricultural machinery

    Directory of Open Access Journals (Sweden)

    Euclides Reame Junior

    2012-12-01

    Full Text Available Os projetos colaborativos de novos produtos são fundamentais para que empresas aumentem o grau de inovação em seus produtos. Bons resultados dependem da identificação de fatores críticos de sucesso (FCS e não há tais estudos na Indústria de Máquinas Agrícolas (IMA. O artigo verifica se os FCS identificados na literatura poderiam ser utilizados em levantamentos do setor e se há outros a considerar. Apresenta revisão bibliográfica e levantamento em empresa com elevado nível de maturidade em PDP frente às empresas da IMA. Empregou-se o método de estudo de caso único, do tipo incorporado. A unidade de análise são projetos do tipo colaborativo e de sucesso: dois deles no total. Identificam-se fatores que podem não ser críticos, apesar de apontados pela literatura; indica-se a existência de novos FCS e reforça-se a importância dos fatores ligados à garantia de igualdade e fatores universais de sucesso.The collaborative product development is essential for companies to increase the innovation degree of their products. Companies must follow the critical success factors (CSF in order to achieve the expected results. There is a set of papers that identified critical success factors (CSF for collaborative projects; however, there is no paper verifying those factors in Brazil, especially in the Agricultural Machinery Industry. This article aims to verify whether the CSFs identified in the literature could be used in this context. A bibliographical review was carried out to identify a CSF list. After that, a single case study was developed, using the project as unit of analysis. Two successful and collaborative projects were evaluated. The results described new CSFs and reinforced others, as factors related to relationship equality and universality.

  5. Vibration of hydraulic machinery

    CERN Document Server

    Wu, Yulin; Liu, Shuhong; Dou, Hua-Shu; Qian, Zhongdong

    2013-01-01

    Vibration of Hydraulic Machinery deals with the vibration problem which has significant influence on the safety and reliable operation of hydraulic machinery. It provides new achievements and the latest developments in these areas, even in the basic areas of this subject. The present book covers the fundamentals of mechanical vibration and rotordynamics as well as their main numerical models and analysis methods for the vibration prediction. The mechanical and hydraulic excitations to the vibration are analyzed, and the pressure fluctuations induced by the unsteady turbulent flow is predicted in order to obtain the unsteady loads. This book also discusses the loads, constraint conditions and the elastic and damping characters of the mechanical system, the structure dynamic analysis, the rotor dynamic analysis and the system instability of hydraulic machines, including the illustration of monitoring system for the instability and the vibration in hydraulic units. All the problems are necessary for vibration pr...

  6. MACHINERY COSTS AND INFLATION

    OpenAIRE

    Watts, Myles J; Helmers, Glenn A.

    1981-01-01

    This article addresses (1) the differences in machinery cost estimating techniques, particularly for depreciation and opportunity cost, and (2) the necessary modifications in cost estimating techniques to account for the changing monetary base under inflation. The conditions under which capital budgeting and traditional budgeting differ are examined on a before tax and after tax basis, with and without inflation. The variations in cost estimates depending upon techniques, and with and without...

  7. Material flow determination through agricultural machinery management Determinação de fluxo de materiais por meio do gerenciamento de máquinas agrícolas

    Directory of Open Access Journals (Sweden)

    Thiago Libório Romanelli

    2010-08-01

    Full Text Available The approach of material embodiment in agricultural production systems is important because it determines the convergence of inputs (indirectly, the natural resources to the field. Additionally, material flow is the basis for both environmental (energy analysis, emergy synthesis, life-cycle analysis and carbon inventories and economical analyses. Since different materials cannot compose a single index, generally these flows are not shown, making comparisons among approaches difficult. Another aspect that makes comparisons difficult is the definition of the boundary of the studied system. If these boundaries differ, results will also be different, hiding actual distinctions among systems. The present study aims to suggest an arrangement of existing models to determine material flow in agricultural production systems. The following steps were considered: i the adoption of a diagram language to represent the analyzed system; ii determination of the material flow for directly applied inputs; iii determination of the material flow for indirectly applied inputs, which included: determination of the effective field capacity; fuel consumption; machinery depreciation; and labor. Data on fuel consumption were compared with the models presented. The best model applied was a fixed parameter based on engine power (0.163 L kW-1 h-1. The determination of the material flow for maize silage production presented similar results as those obtained in regional databases.A abordagem da incorporação material em sistemas agrícolas é importante, pois determina a convergência de insumos (indiretamente, de recursos naturais no campo. Além disso, os fluxos de materiais são a base para quaisquer análises ambientais (análises de energia, síntese de emergia, ciclo de vida e inventários de carbono e econômicas. Uma vez que diferentes materiais não podem compor um único índice, geralmente esses fluxos não são mostrados. Isso dificulta comparações entre an

  8. The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

    Science.gov (United States)

    Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

    Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

  9. Bacterial mitotic machineries

    DEFF Research Database (Denmark)

    Gerdes, Kenn; Møller-Jensen, Jakob; Ebersbach, Gitte; Kruse, Torben; Nordström, Kurt

    2004-01-01

    Here, we review recent progress that yields fundamental new insight into the molecular mechanisms behind plasmid and chromosome segregation in prokaryotic cells. In particular, we describe how prokaryotic actin homologs form mitotic machineries that segregate DNA before cell division. Thus, the P......M protein of plasmid R1 forms F actin-like filaments that separate and move plasmid DNA from mid-cell to the cell poles. Evidence from three different laboratories indicate that the morphogenetic MreB protein may be involved in segregation of the bacterial chromosome....

  10. Small Agricultural Machinery Path Intelligent Tracking Control Based on Fuzzy Immune PID%基于免疫模糊PID的小型农业机械路径智能跟踪控制

    Institute of Scientific and Technical Information of China (English)

    熊中刚; 叶振环; 贺娟; 陈连贵; 令狐金卿

    2015-01-01

    为实现复杂环境下小型农业机械田间作业时的路径跟踪控制,提出了基于免疫模糊PID (比例-积分-微分)的智能路径跟踪控制方法.首先,路径跟踪控制被分解为自动直线导航和自动转向控制任务,并分别构建了能够实现自动导航的模糊控制器和基于免疫模糊PID控制的自动转向方法.该设计在无人驾驶高速插秧机硬件系统基础上,开发了基于双激光源定位技术、电子罗盘和角度传感器的自动导航控制系统.其次,根据自动导航控制系统构造和工作原理,提出了直线和曲线路径跟踪的方法.最后,利用Matlab/Simulink仿真平台和插秧机的运动学模型对所设计的路径跟踪控制原理和模糊控制器进行了有效性验证,同时完成了包括直线和曲线的路径跟踪试验.当插秧机以1 m/s的速度进行直线跟踪时,最大跟踪偏差只有4 cm,平均跟踪偏差为0.84 cm;当以同样的速度做曲线跟踪时,曲线路径跟踪时的最大偏差为0.6 m,平均跟踪偏差控制在12 cm以内.仿真和试验结果表明,该套控制系统能够有效地控制无人驾驶高速插秧机按预定路径行走.%An intelligent path tracking control method is proposed based on fuzzy immune PID (proportional-integral-differential), to realize path tracking control for small agricultural machinery in complex environment. Firstly, a path tracking control task is decomposed into linear automatic navigation control task and automatic steering control task, and a fuzzy controller for automatic navigation and an automatic steering control method based on fuzzy immune PID are constructed. An automatic navigation control system is developed with dual laser source localization technology, electronic compass and angle sensor based on the hardware system of the unmanned high speed transplanter. Secondly, the straight line and the curve line path tracking methods are

  11. Matrix analysis of electrical machinery

    CERN Document Server

    Hancock, N N

    2013-01-01

    Matrix Analysis of Electrical Machinery, Second Edition is a 14-chapter edition that covers the systematic analysis of electrical machinery performance. This edition discusses the principles of various mathematical operations and their application to electrical machinery performance calculations. The introductory chapters deal with the matrix representation of algebraic equations and their application to static electrical networks. The following chapters describe the fundamentals of different transformers and rotating machines and present torque analysis in terms of the currents based on the p

  12. Pumping machinery theory and practice

    CERN Document Server

    Badr, Hassan M

    2014-01-01

    Pumping Machinery Theory and Practice comprehensively covers the theoretical foundation and applications of pumping machinery. Key features: Covers characteristics of centrifugal pumps, axial flow pumps and displacement pumpsConsiders pumping machinery performance and operational-type problemsCovers advanced topics in pumping machinery including multiphase flow principles, and two and three-phase flow pumping systemsCovers different methods of flow rate control and relevance to machine efficiency and energy consumptionCovers different methods of flow rate control and relevance to machine effi

  13. Effect of machinery wheel load on grass yield

    DEFF Research Database (Denmark)

    Green, Ole; Jørgensen, Rasmus Nyholm; Kristensen, Kristian;

    2010-01-01

    Effect of machinery wheel load on grass   Ole Green1, Rasmus N. Jørgensen2, Kristian Kristensen3, René Gislum3, Dionysis Bochtis1, & Claus G. Sørensen1   1University of Aarhus, Dept. of Agricultural Engineering 2University of Southern Denmark, Inst. of Chemical Eng., Biotechnology and Environmental...

  14. 30 CFR 56.14204 - Machinery lubrication.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery lubrication. 56.14204 Section 56... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 56.14204 Machinery lubrication. Machinery...

  15. 46 CFR 169.241 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery. 169.241 Section 169.241 Shipping COAST GUARD... Certification Inspections § 169.241 Machinery. (a) At each inspection for certification and periodic inspection.... Mechanisms are operationally tested and visually examined. (3) Auxiliary machinery. All machinery...

  16. 30 CFR 57.14204 - Machinery lubrication.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery lubrication. 57.14204 Section 57... MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 57.14204 Machinery lubrication. Machinery...

  17. Tractor & Machinery Safety. 1984 Revision.

    Science.gov (United States)

    Montana State Office of Public Instruction, Helena. Dept. of Vocational Education Services.

    This curriculum guide is intended for use in teaching an instructional unit in tractor and machinery safety that is geared toward college freshmen. Addressed in the individual lessons of the unit are the following topics: understanding the importance of safe and efficient tractor operation, understanding the characteristics of tractors, preparing…

  18. Architecture and regulation of negative-strand viral enzymatic machinery

    OpenAIRE

    Kranzusch, Philip J.; Whelan, Sean P. J.

    2012-01-01

    Negative-strand (NS) RNA viruses initiate infection with a unique polymerase complex that mediates both mRNA transcription and subsequent genomic RNA replication. For nearly all NS RNA viruses, distinct enzymatic domains catalyzing RNA polymerization and multiple steps of 5′ mRNA cap formation are contained within a single large polymerase protein (L). While NS RNA viruses include a variety of emerging human and agricultural pathogens, the enzymatic machinery driving viral replication and gen...

  19. Italian Textile Machinery Seminar in Bangladesh

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The Association of Italian Textile Machinery Manufacturers (ACIMIT) and the Italian Trade Commission will hold a technological seminar on "Italian textile machinery: the way to improve Bangladesh textile competitiveness"

  20. Climate design of vegetable oil fuels. Mathematical model for the calculation and optimization of greenhouse gas emission saving using vegetable oil as a fuel especially in agricultural machinery in accordance with the fuel quality directive 2009/30/EG; Klimadesign von Pflanzenoelkraftstoffen. Mathematisches Modell fuer die Berechnung und Optimierung der Treibhausgasemissionseinsparung durch den Einsatz von Pflanzenoel als Kraftstoff insbesondere in Landwirtschaftsmaschinen in Uebereinstimmung mit der Kraftstoffqualitaetsrichtlinie 2009/30/EG

    Energy Technology Data Exchange (ETDEWEB)

    Stoehr, Michael [Bundesdeutscher Arbeitskreis fuer Umweltbewusstes Management e.V., B.A.U.M., Muenchen (Germany); Pickel, Peter [John Deere European Technology Innovation Center, Kaiserslautern (Germany)

    2012-07-01

    The use of biofuels in agricultural machinery is an option to respond to climate requirements. This option is being imposed from the European Commission to manufacturers of mobile machines. The contribution under consideration formulates a mathematical model that implements the regulations of the EU Fuel Quality Directive for complex manufacturing processes in the calculation rules. Initially, this model was tested and verified by the example of the standard manufacturing process of pure rapeseed oil. Then, possibilities of optimization for the production of rapeseed oil are explored. Finally, the mathematical model was applied to the calculation of greenhouse gas emissions from camelina oil from mixed cultivation with wheat.

  1. 46 CFR 130.450 - Machinery alarms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery alarms. 130.450 Section 130.450 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS VESSEL CONTROL, AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.450 Machinery alarms....

  2. 46 CFR 176.804 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery. 176.804 Section 176.804 Shipping COAST GUARD... CERTIFICATION Material Inspections § 176.804 Machinery. At each initial and subsequent inspection for... ready for inspections of machinery, fuel, and piping systems, including the following: (a) Operation...

  3. Technological adaptation and employment in the small-scale farm machinery industry: uttar pradesh, India.

    OpenAIRE

    Mishra, S. C.

    1985-01-01

    ILO pub-WEP pub. Working paper on industrial development, based on a sample of 81 small scale industries producing agricultural machinery in Uttar Pradesh, India - explains industries' stagnation due to failure to produce technological change and innovations; stresses need for marketing and publicity for inexpensive agricultural equipment rather than state subsidy to produce expensive tractors, etc. Bibliography, statistical tables.

  4. Study on the Development of Total Power of Agricultural Machinery in Jilin Province—Based on Principal Component Analysis%吉林省农业机械总动力发展研究—基于主成分分析

    Institute of Scientific and Technical Information of China (English)

    崔红艳

    2016-01-01

    As the food great province , it is very crucial to the development of agricultural mechanization in Jilin Province.This paper analyzes the total power of agricultural machinery and the influence factors by principal component analysis method using the relevant data of Jilin Province during 1994-2013 .The multi linear regression model is estab-lished for variable ZY and independent variables by ZX1-ZX9 .In the model , only the rural Engel coefficient and the to-tal power of agricultural machinery is negatively correlated , the rest of the independent variables are positively correlated . The coefficient of per unit area yield of grain is 0.207, and the coefficient of farmers'education level is 0.276, relatively low.And the coefficients of the other independent variables have little difference between 0.34~0.37.Finally, it put forward to strengthen the elements of macro capital support , micro production and technology input in the future in Jilin Province .In addition , it need to strengthen the cultivation of new peasants occupation , to meet the demand for talent and technology of agricultural development in the new period .%吉林省作为粮食大省,农业机械化的发展对于实现农业现代化至关重要. 为此,采用吉林省1994-2013 年的相关数据,运用主成分分析法,对吉林省农业机械总动力及其9 个影响因素进行相关研究,最终建立因变量ZY与自变量ZX1 ~ZX9的多元线性回归模型. 模型中,只有农村恩格尔系数与农业机械总动力呈负相关,其余自变量均与农业机械总动力呈正相关. 粮食单产的系数为0.207;农民受教育程度的系数为0.276,相对较低;其余自变量的系数均在0.34 ~0.37 之间,基本相差不大. 最后,提出吉林省要继续加强宏观资本、微观生产资料及科技管理要素的投入,大力培育新型职业农民的建议,以适应新时期农机发展对人才与科技的需求.

  5. FOREWORD: 26th IAHR Symposium on Hydraulic Machinery and Systems

    Science.gov (United States)

    Wu, Yulin; Wang, Zhengwei; Liu, Shuhong; Yuan, Shouqi; Luo, Xingqi; Wang, Fujun

    2012-11-01

    The 26th IAHR Symposium on Hydraulic Machinery and Systems, will be held in Beijing, China, 19-23 August 2012. It is jointly organized by Tsinghua University, State Key Laboratory of Hydro Science and Hydraulic Engineering, China, Jiangsu University, Xi'an University of Technology, China Agricultural University, National Engineering Research Center of Hydropower Equipment and Dongfang Electric Machinery Co., Ltd. It is the second time that China hosts such a symposium. By the end of 2011, the China electrical power system had a total of 1 050 GW installed power, out of which 220 GW was in hydropower plants. The energy produced in hydropower facilities was 662.6 TWh from a total of 4,720 TWh electrical energy production in 2011. Moreover, in 2020, new hydropower capacities are going to be developed, with a total of 180 GW installed power and an estimated 708 TWh/year energy production. And in 2011, the installed power of pumped storage stations was about 25GW. In 2020, the data will be 70GW. At the same time, the number of pumps used in China is increasing rapidly. China produces about 29,000,000 pumps with more than 220 series per year. By the end of 2011, the Chinese pumping system has a total of 950 GW installed power. The energy consumed in pumping facilities was 530 TWh in 2011. The pump energy consumption accounted for about 12% of the national electrical energy production. Therefore, there is a large market in the field of hydraulic machinery including water turbines, pump turbines and a variety of pumps in China. There are also many research projects in this field. For example, we have conducted National Key Research Projects on 1000 MW hydraulic turbine, and on the pump turbines with high head, as well as on the large capacity pumps for water supply. Tsinghua University of Beijing is proud to host the 26th IAHR Symposium on Hydraulic Machinery and Systems. Tsinghua University was established in 1911, after the founding of the People's Republic of China. It

  6. FOREWORD: 26th IAHR Symposium on Hydraulic Machinery and Systems

    Science.gov (United States)

    Wu, Yulin; Wang, Zhengwei; Liu, Shuhong; Yuan, Shouqi; Luo, Xingqi; Wang, Fujun

    2012-11-01

    The 26th IAHR Symposium on Hydraulic Machinery and Systems, will be held in Beijing, China, 19-23 August 2012. It is jointly organized by Tsinghua University, State Key Laboratory of Hydro Science and Hydraulic Engineering, China, Jiangsu University, Xi'an University of Technology, China Agricultural University, National Engineering Research Center of Hydropower Equipment and Dongfang Electric Machinery Co., Ltd. It is the second time that China hosts such a symposium. By the end of 2011, the China electrical power system had a total of 1 050 GW installed power, out of which 220 GW was in hydropower plants. The energy produced in hydropower facilities was 662.6 TWh from a total of 4,720 TWh electrical energy production in 2011. Moreover, in 2020, new hydropower capacities are going to be developed, with a total of 180 GW installed power and an estimated 708 TWh/year energy production. And in 2011, the installed power of pumped storage stations was about 25GW. In 2020, the data will be 70GW. At the same time, the number of pumps used in China is increasing rapidly. China produces about 29,000,000 pumps with more than 220 series per year. By the end of 2011, the Chinese pumping system has a total of 950 GW installed power. The energy consumed in pumping facilities was 530 TWh in 2011. The pump energy consumption accounted for about 12% of the national electrical energy production. Therefore, there is a large market in the field of hydraulic machinery including water turbines, pump turbines and a variety of pumps in China. There are also many research projects in this field. For example, we have conducted National Key Research Projects on 1000 MW hydraulic turbine, and on the pump turbines with high head, as well as on the large capacity pumps for water supply. Tsinghua University of Beijing is proud to host the 26th IAHR Symposium on Hydraulic Machinery and Systems. Tsinghua University was established in 1911, after the founding of the People's Republic of China. It

  7. Pressure measurement on rotating machinery

    Science.gov (United States)

    Pemberton, Addison; Harris, Louis R.

    The objective of this paper is to describe the use of pressure scanners for measuring multiple unknown pressures in rotating machinery. Pressure scanners consist of stepper driven selector valves, which sequentially connect unknown pressures and apply these pressures to a single pressure transducer. This generates analog voltage signals which can be computerized and plotted while a pressure test is in progress. When an electrical selector switch on the same stepper driven shaft is added, thermocouple signals can be brought out of a rotating machine synchronously with pressure data.

  8. Selected References and Aids for Teaching Agricultural Mechanics to Students of Agricultural Education.

    Science.gov (United States)

    Mazzucco, April

    The booklet lists references and materials intended for both the student and the teacher of agricultural mechanics. The materials are grouped under nine topics: agricultural shop; metalwork and welding; agricultural machinery; agricultural power; drawing, construction, and maintenance; electricity; water management, soil and water conservation;…

  9. Method of Humanity Design for Food Machinery

    Directory of Open Access Journals (Sweden)

    Xiaowei Jiang

    2013-12-01

    Full Text Available In view of the humanity design problem of the existing food machinery, the author states her own personal design idea. So the author makes an exploration on method of humanity design for components of food machinery, including the monitor, the console, the control device and protection device. At last, several key points that must be followed by the humanity design of the color of food machinery have been pointed out.

  10. Developing Process of Tropical Crop Machinery Standardization

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ General Situation Tropical crop machinery is a new special mechanical profession, which began to develop from 1950s to 1960s in China. Because the weather, soil and farm crops varieties in tropical region are greatly different from those in the other regions, most of the traditional farm machinery can't be directly used in tropical region or on the tropical crops. Tropical crop machinery needs a special design and manufacture. So some professional research institutes and education units were set up and some enterprises were built at that time, and the profession of tropical crop machinery was formed.

  11. Development Status Quo and Trend of Low-carbon Agriculture

    OpenAIRE

    Cao, Liming; Pan, Xiaohua; Li, Maobai

    2013-01-01

    In order to reduce carbon emission in agricultural production, this paper has discussed the development trend of low-carbon agriculture in terms of developing precision agriculture, improving the use efficiency of fertilizer, scientific use of pesticides, water-saving irrigation, ecological control of pests as well as energy conservation and emission reduction by agricultural machinery and other agricultural practices.

  12. Agricultural Mechanics: Program Planning Guide: Volume 3.

    Science.gov (United States)

    Bristol, Benton K.

    The program planning guide for agricultural mechanics was written to assist Applied Biological and Agricultural Occupations (ABAO) teachers in enriching existing programs and/or to provide the basis for expansion of offerings to include additional materials for the cluster areas of agricultural power and machinery, structural and conveniences,…

  13. 46 CFR 115.804 - Machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery. 115.804 Section 115.804 Shipping COAST GUARD....804 Machinery. At each initial and subsequent inspection for certification of a vessel, the owner or managing operator shall be prepared to conduct tests and have the vessel ready for inspections of...

  14. 46 CFR 58.01-45 - Machinery space, ventilation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space, ventilation. 58.01-45 Section 58.01-45... MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-45 Machinery space, ventilation. Each machinery space must be ventilated to ensure that, when machinery or boilers are operating at full power in...

  15. 46 CFR 58.01-40 - Machinery, angles of inclination.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery, angles of inclination. 58.01-40 Section 58.01... AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-40 Machinery, angles of inclination. (a) Propulsion machinery and all auxiliary machinery essential to the propulsion and safety of the vessel must...

  16. 2007 Mississippi Curriculum Framework: Secondary Agriculture Power and Machinery. (Program CIP: 01.0204 - Agricultural Power Machinery Operation)

    Science.gov (United States)

    James, Lee; James, Terry; Washington, Lee; Taylor, John Grady; Rushing, Jimmy

    2007-01-01

    Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

  17. Performance of machinery in potato production in one growing season

    Directory of Open Access Journals (Sweden)

    Kun Zhou

    2015-12-01

    Full Text Available Statistics on the machinery performance are essential for farm managers to make better decisions. In this paper, the performance of all machineries in five sequential operations, namely bed forming, stone separation, planting, spraying and harvesting in the potato production system, were investigated during one growing season. In order to analyse and decompose the recorded GPS data into various time and distance elements for estimation of the machinery performance, an automatic GPS analysis tool was developed. The field efficiency and field capacity were estimated for each operation. Specifically, the measured average field efficiency was 71.3% for bed forming, 68.5% for stone separation, 40.3% for planting, 69.7% for spraying, and 67.4% for harvesting. The measured average field capacities were 1.46 ha/h, 0.53 ha/h, 0.47 ha/h, 10.21 ha/h, 0.51 ha/h, for the bed forming, stone separation, planting, spraying, and harvesting operations, respectively. These results deviate from the corresponding estimations calculated based on norm data from the American Society of Agricultural and Biological Engineers (ASABE. The deviations indicate that norms provided by ASABE cannot be used directly for the prediction of performance of the machinery used in this work. Moreover, the measured data of bed forming and stone separation could be used as supplementary data for the ASABE which does not provide performance norms for these two operations. The gained results can help farm managers to make better management and operational decisions that result in potential improvement in productivity and profitability as well as in potential environmental benefits.

  18. Products Preview of Changzhou DIBA Textile Machinery Factory

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Changzhou DIBA Textile Machinery Factory is ,one of the well-known professional warping and warping knitting machinery manufacturersin domestic Chinese market. Recently, the products occupies a share of 85% among the whole textile machinery market in China,

  19. Energy Savings Thanks to French Textile Machinery

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The French Textile Machinery Manufacturers’ Association (UCMTF) has presented,during a seminar it organized for textile professionals and students,the spectacular energy savings achieved thanks to state of the art

  20. Textile Machinery:Imports Rebound Again

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In the year of 2006,the general situation of China’s textile machinery equipment imports had shown a clear sign of revival from the downward trend of two years ago,with a total annual import of 4.1 billion USD,an increase of 19.05% against the same period of 2005. Continuingly,the year of 2007 has witnessed a sustainable growth trend of textile machinery equipment imports in the first quarter and the trend definitely will be maintained through the whole year.According to statistics released from China Customs,the imports of textile machinery reached 1.098 billion USD in the first three months of 2007, up by 35.26% year-on-year. Then,why China’s textile machinery imports warm up again after two years’ cool down?

  1. The Mendelian disorders of the epigenetic machinery

    OpenAIRE

    Bjornsson, Hans Tomas

    2015-01-01

    The Mendelian disorders of the epigenetic machinery are genetic disorders that involve disruption of the various components of the epigenetic machinery (writers, erasers, readers, and remodelers) and are thus expected to have widespread downstream epigenetic consequences. Studying this group may offer a unique opportunity to learn about the role of epigenetics in health and disease. Among these patients, neurological dysfunction and, in particular, intellectual disability appears to be a comm...

  2. Gestão do desenvolvimento de produto em empresas de pequeno e médio porte do setor de máquinas e implementos agrícolas do Estado de SP Product development process management in small and medium-sized Brazilian companies in the agricultural machinery and implement industry sector

    Directory of Open Access Journals (Sweden)

    José Carlos de Toledo

    2010-01-01

    The product development process (PDP, if well-structured and managed, can become a business process that directly influences the companies' competitiveness increase. The PDP in Brazilian SMEs in the agricultural machinery and implement industry Sector (AMI is little known since most publications on product development focuses on the reality of large and multinational companies, which have a quite different structure from SMEs. The purpose of this paper is to characterize and analyze the management maturity profiles of the product development process in small and medium sized Brazilian companies in the agricultural machinery and implement industry sector located in the state of São Paulo. Therefore, the addressed actions of PDP improvements in those companies can be undertaken. A survey research was conducted in 40 companies. An in loco interview was applied to the respective individual in-charge of PDP by means of a structured questionnaire. For the data analysis, descriptive statistics and the multivariate cluster analysis techniques were used. The findings indicated that the SMEs in AMIs of the state of Sao Paulo present a heterogeneous structure with respect to PDP management. Three groups of companies were identified in the sample with different maturity PDP profiles: Group I (20% of companies in the sample, Group II (50% of the sample, and Group III (30% of the sample. Differences in the management of PDP were observed, especially among companies of Group I (smallest level of PDP maturity and Group III (highest level of PDP maturity. However, despite the differences in PDP management presented in the groups of companies, according to the literature on PDP management, all groups are in the basic (initial maturity level of PDP. The identification of the maturity level, in which these companies are, can help the determination of activities that link the internal actions to improve the PDP of these companies and the proposal of specific public policies that encourage the

  3. 46 CFR 169.625 - Compartments containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing diesel machinery. 169.625... SCHOOL VESSELS Machinery and Electrical Ventilation § 169.625 Compartments containing diesel machinery. (a) Spaces containing machinery must be fitted with adequate dripproof ventilators, trunks,...

  4. 46 CFR 45.149 - Machinery space openings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space openings. 45.149 Section 45.149 Shipping... Assignment § 45.149 Machinery space openings. (a) Machinery space openings in position 1 or 2 must be framed... funnel or machinery space ventilator that must be kept open for the essential operations of the ship...

  5. 46 CFR 58.20-15 - Installation of refrigerating machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Installation of refrigerating machinery. 58.20-15... AND AUXILIARY MACHINERY AND RELATED SYSTEMS Refrigeration Machinery § 58.20-15 Installation of refrigerating machinery. (a) Where refrigerating machines are installed in which anhydrous ammonia is used as...

  6. 46 CFR 58.01-35 - Main propulsion auxiliary machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main propulsion auxiliary machinery. 58.01-35 Section 58... AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-35 Main propulsion auxiliary machinery. Auxiliary machinery vital to the main propulsion system must be provided in duplicate unless the...

  7. 46 CFR 58.01-25 - Means of stopping machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Means of stopping machinery. 58.01-25 Section 58.01-25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-25 Means of stopping machinery. Machinery...

  8. 46 CFR 111.103-3 - Machinery space ventilation.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery space ventilation. 111.103-3 Section 111.103-3...-GENERAL REQUIREMENTS Remote Stopping Systems § 111.103-3 Machinery space ventilation. (a) Each machinery... are operable from two positions, one of which must be outside the machinery space....

  9. 46 CFR 42.15-35 - Machinery space openings.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space openings. 42.15-35 Section 42.15-35... BY SEA Conditions of Assignment of Freeboard § 42.15-35 Machinery space openings. (a) Machinery space..., funnel, or machinery space ventilators in an exposed position on the freeboard or superstructure...

  10. 29 CFR 1910.215 - Abrasive wheel machinery.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Abrasive wheel machinery. 1910.215 Section 1910.215 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.215 Abrasive wheel machinery. (a... wheel in motion. (5) Excluded machinery. Natural sandstone wheels and metal, wooden, cloth, or...

  11. 46 CFR 174.195 - Bulkheads in machinery spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Bulkheads in machinery spaces. 174.195 Section 174.195... in machinery spaces. (a) The bulkhead in each machinery space of each OSV must be watertight to the bulkhead deck. (b) Each penetration of, and each opening in, a bulkhead in a machinery space must— (1)...

  12. Machinery condition monitoring principles and practices

    CERN Document Server

    Mohanty, Amiya Ranjan

    2015-01-01

    Find the Fault in the MachinesDrawing on the author's more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, an

  13. Exploring GPS Data for Operational Analysis of Farm Machinery

    Directory of Open Access Journals (Sweden)

    Ramin Shamshiri

    2013-04-01

    Full Text Available Global Positioning System (GPS has made a great evolution in different aspects of modern agricultural sectors. Today, a growing number of crop producers are using GPS and other modern electronic and computer equipments to practice Site Specific Management (SSM and precision agriculture. This technology has the potential in agricultural mechanization by providing farmers with a sophisticated tool to measure yield on much smaller scales as well as precisely determination and automatic storing of variables such as field time, working area, machine travel distance and speed, fuel consumption and yield information. This study focuses on how to interpret and process raw GPS data for operational analysis of farm machinery. Exact determinations of field activities using GPS data along with accurate measurements and records of yield provide an integrated tool to calculate field efficiency and field machine index which in turn increases machine productivity and labor saving. The results can also provide graphical tools for visualizing machine operator’s performance as well as making decision on field and machine size and selection.

  14. Italian Textile Machinery Industry Focuses on Sustainability

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As for fashion industry,Italian brands always play as one of the leaders influencing the global trends.This time,in Shanghai,the Italian textile machinery manufacturers highlight the latest proposals on sustainability and eco-friendly technology.

  15. CCPIT Machinery Exhibition Succeeded in Kuala Lumpur

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

      From August 18 to 20, 2005, China Council for the Promotion of International Trade(CCPIT) held China Machinery and Electronics Trade Exhibition, CME 2005 in Kuala Lumpur, the capital of Malaysia on behalf of China, a good job has been done.……

  16. CCPIT Machinery Exhibition Succeeded in Kuala Lumpur

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ From August 18 to 20, 2005, China Council for the Promotion of International Trade(CCPIT) held China Machinery and Electronics Trade Exhibition, CME 2005 in Kuala Lumpur, the capital of Malaysia on behalf of China, a good job has been done.

  17. Dental apoptosis machinery in the mouse

    Czech Academy of Sciences Publication Activity Database

    Matalová, Eva; Sharpe, P. T.; Šetková, Jana; Míšek, Ivan; Tucker, A. S.

    Cold Spring: Cold Spring Harbor Laboratory, 2006. s. 1-1. [19th annual meeting on Mouse Molecular Genetics. 30.08.2006-03.09.2006, Cold Spring Harbor Laboratory] R&D Projects: GA ČR GA304/04/0101 Institutional research plan: CEZ:AV0Z50450515 Keywords : dental apoptosis machinery Subject RIV: EA - Cell Biology

  18. Updating the model TREMOD - Mobile Machinery (TREMOD-MM); Aktualisierung des Modells TREMOD - Mobile Machinery (TREMOD-MM)

    Energy Technology Data Exchange (ETDEWEB)

    Helms, Hinrich; Lambrecht, Udo; Knoerr, Wolfram [ifeu - Institut fuer Energie- und Umweltforschung Heidelberg gGmbH, Heidelberg (Germany)

    2010-05-15

    In the context of the project ''Development of a model for the computation of the air pollutant emissions and the fuel consumption of combustion engines in mobile devices and machines'', the Institute for Energy and Environmental Research GmbH (Heidelberg, Federal Republic of Germany) has created the model TREMOD-MM (TREMOD Mobile Machinery). Thus a detailed computation of the emissions from mobile devices and machines in the agriculture, construction industry, forestry and gardening as well as the sport shipping and passenger shipping can be accomplished. Strongly differentiated data are considered to the age structure, engine performance, use and emission behaviour. Thus it is possible to compute the emissions for different scenarios in high degree of detail.

  19. Developmental Status Quo and Trends of Low-carbon Agriculture

    Institute of Scientific and Technical Information of China (English)

    Liming; CAO; Xiaohua; PAN; Maobai; LI

    2013-01-01

    In order to reduce carbon emission in agricultural production,this paper has discussed the developmental trends of low-carbon agriculture in terms of developing precision agriculture,improving the efficiency of fertilizer utilization,scientific use of pesticides,water-saving irrigation,ecological control of pests and diseases,as well as energy conservation and emission reduction by agricultural machinery and other agricultural practices.

  20. Diesel Consumption of Agriculture in China

    Directory of Open Access Journals (Sweden)

    Shusen Gui

    2012-12-01

    Full Text Available As agricultural mechanization accelerates the development of agriculture in China, to control the growth of the resulting energy consumption of mechanized agriculture without negatively affecting economic development has become a major challenge. A systematic analysis of the factors (total power, unit diesel consumption, etc. influencing diesel consumption using the SECA model, combined with simulations on agricultural diesel flows in China between 1996 and 2010 is performed in this work. Seven agricultural subsectors, fifteen categories of agricultural machinery and five farm operations are considered. The results show that farming and transportation are the two largest diesel consumers, accounting for 86.23% of the total diesel consumption in agriculture in 2010. Technological progress has led to a decrease in the unit diesel consumption and an increase in the unit productivity of all machinery, and there is still much potential for future progress. Additionally, the annual average working hours have decreased rapidly for most agricultural machinery, thereby influencing the development of mechanized agriculture.

  1. 46 CFR 171.095 - Machinery space bulkhead.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Machinery space bulkhead. 171.095 Section 171.095... PERTAINING TO VESSELS CARRYING PASSENGERS Additional Subdivision Requirements § 171.095 Machinery space... transverse watertight bulkheads to separate the machinery space from the remainder of the vessel....

  2. 29 CFR 1915.164 - Ship's propulsion machinery.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's propulsion machinery. 1915.164 Section 1915.164 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... Machinery and Piping Systems § 1915.164 Ship's propulsion machinery. (a) Before work is performed on...

  3. 46 CFR 109.419 - Report of unsafe machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Report of unsafe machinery. 109.419 Section 109.419... OPERATIONS Reports, Notifications, and Records Reports and Notifications § 109.419 Report of unsafe machinery. If a boiler, unfired pressure vessel, or other machinery on a unit is unsafe to operate, the...

  4. 29 CFR 1910.264 - Laundry machinery and operations.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Laundry machinery and operations. 1910.264 Section 1910.264..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Special Industries § 1910.264 Laundry machinery... attached to, or forming an integral part of any machinery shall be removed or made ineffective except...

  5. 29 CFR 1915.165 - Ship's deck machinery.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Ship's deck machinery. 1915.165 Section 1915.165 Labor... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Ship's Machinery and Piping Systems § 1915.165 Ship's deck machinery. (a) Before work is performed on the anchor windlass or any...

  6. 46 CFR 185.352 - Ventilation of gasoline machinery spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of gasoline machinery spaces. 185.352 Section 185.352 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS... machinery spaces. The mechanical exhaust for the ventilation of a gasoline machinery space, required...

  7. 46 CFR 58.01-50 - Machinery space, noise.

    Science.gov (United States)

    2010-10-01

    ...) (incorporated by reference, see 46 CFR 58.03-1). No person may encounter a 24-hour effective noise level greater... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery space, noise. 58.01-50 Section 58.01-50... MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-50 Machinery space, noise. (a) Each...

  8. 29 CFR 1910.213 - Woodworking machinery requirements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Woodworking machinery requirements. 1910.213 Section 1910..., DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.213 Woodworking machinery requirements. (a) Machine construction general. (1) Each machine shall be so...

  9. 46 CFR 97.30-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accidents to machinery. 97.30-5 Section 97.30-5 Shipping... Reports of Accidents, Repairs, and Unsafe Equipment § 97.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  10. 46 CFR 58.01-20 - Machinery guards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Machinery guards. 58.01-20 Section 58.01-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING MAIN AND AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-20 Machinery guards. Gears, couplings, flywheels...

  11. 46 CFR 122.208 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Accidents to machinery. 122.208 Section 122.208 Shipping... Voyage Records § 122.208 Accidents to machinery. The owner, managing operator, or master shall report damage to a boiler, unfired pressure vessel, or machinery that renders further use of the item...

  12. 30 CFR 57.14205 - Machinery, equipment, and tools.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery, equipment, and tools. 57.14205... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 57.14205 Machinery, equipment, and...

  13. 46 CFR 130.460 - Placement of machinery alarms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Placement of machinery alarms. 130.460 Section 130.460..., AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.460 Placement of machinery alarms. (a) Visible and audible alarms must be installed at the pilothouse to...

  14. 46 CFR 252.33 - Hull and machinery insurance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 252.33 Section 252.33... Subsidy Rates § 252.33 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and machinery, increased value, excess general...

  15. 29 CFR 1910.214 - Cooperage machinery. [Reserved

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Cooperage machinery. 1910.214 Section 1910.214 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.214 Cooperage machinery....

  16. Present Situation of Petroleum Machinery Manufacturers in China

    Institute of Scientific and Technical Information of China (English)

    Li Xilu

    2008-01-01

    Since China joined the WTO, the environment for the development of petroleum machinery industry in the country has changed a lot. As international petroleum machinery manufacturers enter into Chinese market, petroleum machinery manufacturers of the country are facing fierce competition both at home and abroad.

  17. 46 CFR 109.205 - Inspection of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Inspection of boilers and machinery. 109.205 Section 109... OPERATIONS Tests, Drills, and Inspections § 109.205 Inspection of boilers and machinery. The chief engineer or engineer in charge, before he assumes charge of the boilers and machinery of a unit shall...

  18. 46 CFR 185.208 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Accidents to machinery. 185.208 Section 185.208 Shipping...) OPERATIONS Marine Casualties and Voyage Records § 185.208 Accidents to machinery. The owner, managing operator, or master shall report damage to a boiler, unfired pressure vessel, or machinery that...

  19. 46 CFR 78.33-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Accidents to machinery. 78.33-5 Section 78.33-5 Shipping... Accidents, Repairs, and Unsafe Equipment § 78.33-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use of the...

  20. 30 CFR 56.14205 - Machinery, equipment, and tools.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery, equipment, and tools. 56.14205... NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Machinery and Equipment Safety Practices and Operational Procedures § 56.14205 Machinery, equipment, and tools....

  1. 46 CFR 196.30-5 - Accidents to machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Accidents to machinery. 196.30-5 Section 196.30-5... Reports of Accidents, Repairs, and Unsafe Equipment § 196.30-5 Accidents to machinery. (a) In the event of an accident to a boiler, unfired pressure vessel, or machinery tending to render the further use...

  2. Vibration analysis techniques for rotating machineries

    International Nuclear Information System (INIS)

    In this modem era, lives and standard of living are closely linked with machines. Today higher quality, reliability and operational safety in a machine in addition the demand for its long service life are expected. To meet these demands, one requires the knowledge of its dynamic behavior. This can be achieved by employing predictive maintenance strategy with regular condition inspection and early fault recognition in case of damage. Machine diagnosis by vibration analysis technique offers cost effective and reliable method of condition evaluation. The causes can be located and corrective measures can be planned long before severe, direct and consequential damage/breakdown can occur. Although this subject is multifarious, this paper provides some assistance in understanding the basics of vibration measurement, analysis and diagnosis of faults in rotating machinery. Machinery diagnosis through vibration measurement is an integral part of in-service inspection programme practiced in nuclear power plants and research reactors

  3. The Autophagic Machinery in Enterovirus Infection

    Directory of Open Access Journals (Sweden)

    Jeffrey K. F. Lai

    2016-01-01

    Full Text Available The Enterovirus genus of the Picornaviridae family comprises many important human pathogens, including polioviruses, rhinovirus, enterovirus A71, and enterovirus D68. They cause a wide variety of diseases, ranging from mild to severe life-threatening diseases. Currently, no effective vaccine is available against enteroviruses except for poliovirus. Enteroviruses subvert the autophagic machinery to benefit their assembly, maturation, and exit from host. Some enteroviruses spread between cells via a process described as autophagosome-mediated exit without lysis (AWOL. The early and late phases of autophagy are regulated through various lipids and their metabolizing enzymes. Some of these lipids and enzymes are specifically regulated by enteroviruses. In the present review, we summarize the current understanding of the regulation of autophagic machinery by enteroviruses, and provide updates on recent developments in this field.

  4. OPTIMAL MAINTENANCE AND REPLACEMENT OF EXTRACTION MACHINERY

    Institute of Scientific and Technical Information of China (English)

    Suresh P.SETHI; Hong-Mo YEH; Rong ZHANG; Andrew K.S.JARDINE

    2008-01-01

    This paper considers a problem of optimal preventive maintenance and replacement schedule ofequipment devoted to extracting resources from known deposits. Typical examples are oil drills, mine shovels, etc. At most one replacement of the existing machinery by a new one is allowed. The problem is formulated as an optimal control problem subject to the state constraint that the remaining deposit at any given time is nonnegative. We show that the optimal preventive maintenance, production rates, and the replacement and salvage times of the existing machinery and the new one, if required, can be obtained by solving sequentially a series of free-end-point optimal control problems. Moreover, an algorithm based on this result is developed and used to solve two illustrative examples.

  5. ROMADIS - A rotating machinery diagnosis system

    International Nuclear Information System (INIS)

    This paper describes the PC-based software package ROMADIS developed for the rotating machinery diagnosis. It contains advanced signal processing techniques for extracting multi-features from the time records and uses a modified decision tree technique for the knowledge acquisition, the knowledge representation and the failure diagnosis process. It is user-friendly programmed and the diagnostic results are very easy to be verified. (author). 5 refs, 3 figs

  6. Hydrodynamic bearing for light loaded turbo machinery

    International Nuclear Information System (INIS)

    The rotor of any turbo-machinery running in journal bearings is prone to two types of well-known vibrations. Synchronous Vibrations occur due to run out or forces resulting from unbalancing of the shaft. Sub synchronous vibrations are more serious, this phenomenon is commonly associated with oil film forces of the journal bearing. In order to avoid sub synchronous vibrations, different types of journal bearings having helical grooves were investigated both theoretically and experimentally. (author)

  7. Labour and machinery analysis in organic farming

    OpenAIRE

    Sørensen, C.G.; Nielsen, V

    2002-01-01

    Organic farming is generally considered to require more labour than conventional farming, as the assumption is that chemical inputs are substituted by factors like new knowledge, practices and labour. However, the overall effect on labour and machinery usage when carrying out a transition from conventional to organic farming depends in a complex way of the type of production, different farm-specific factors, etc. In order to investigate the labour usage in organic farming as compared with con...

  8. Machinery prognostics and prognosis oriented maintenance management

    CERN Document Server

    Yan, Jihong

    2014-01-01

    This book gives a complete presentatin of the basic essentials of machinery prognostics and prognosis oriented maintenance management, and takes a look at the cutting-edge discipline of intelligent failure prognosis technologies for condition-based maintenance.  Latest research results and application methods are introduced for signal processing, reliability moelling, deterioration evaluation, residual life prediction and maintenance-optimization as well as applications of these methods.

  9. Trade Patterns in Japan's Machinery Sector

    OpenAIRE

    Hitoshi Sasaki; Yuko Koga

    2005-01-01

    This paper analyzes trade patterns in Japan's machinery sector using disaggregated data of export and import commodities. It is found that the vertical intra-industry trade--the two-way trade of products differentiated by quality--with Asian countries expanded in the 1990s. According to the results of the empirical study, this trade pattern is closely related to differences in the capital/labor ratio between Japan and its trading partners, and to Japan's foreign direct investments. It suggest...

  10. Low Back Pain in Port Machinery Operators

    Science.gov (United States)

    BOVENZI, M.; PINTO, I.; STACCHINI, N.

    2002-05-01

    The occurrence of several types of low back pain (LBP) was investigated by a standardized questionnaire in a group of 219 port machinery operators exposed to whole-body vibration (WBV) and postural load and in a control group of 85 maintenance workers employed at the same transport company. The group of port machinery operators included 85 straddle carrier drivers, 88 fork-lift truck drivers, and 46 crane operators. The vector sum of the frequency-weighted r.m.s. acceleration of vibration measured on the seatpan of port vehicles and machines averaged 0·90 m/s2 for fork-lift trucks, 0·48 m/s2 for straddle carriers, 0·53 m/s2 for mobile cranes, and 0·22 m/s2 for overhead cranes. The 12-month prevalence of low back symptoms (LBP, sciatic pain, treated LBP, sick leave due to LBP) was significantly greater in the fork-lift truck drivers than in the controls and the other two groups of port machinery operators. After adjusting for potential confounders, the prevalence of low back symptoms was found to increase with the increase of WBV exposure expressed as duration of exposure (driving years), equivalent vibration magnitude (m/s2), or cumulative vibration exposure (yr m2/s4). An excess risk for lumbar disc herniation was observed in the port machinery operators with prolonged driving experience. In both the controls and the port machinery operators, low back complaints were strongly associated with perceived postural load assessed in terms of frequency and/or duration of awkward postures at work. Multivariate analysis showed that vibration exposure and postural load were independent predictors of LBP. Even though the cross-sectional design of the present study does not permit firm conclusions on the relationship between WBV exposure and low back disorders, the findings of this investigation provide additional epidemiological evidence that seated WBV exposure combined with non-neutral trunk postures, as while driving, is associated with an increased risk of long

  11. Soil compaction in vineyards of different ages in Pannonian Croatia. Part I. Influence of machinery traffic and soil management on compaction of individual horizons

    OpenAIRE

    Igor BOGUNOVIĆ; Ivica KISIĆ; Maletić, Edi; PERČIN, Aleksandra; MATOŠIĆ, Stefan; Luka ROŠKAR

    2016-01-01

    Soil compaction is one of the most important problems in agricultural production. Tillage system with frequent machinery traffic due protection, agrotechnic operation and harvesting has effect on different soil compaction levels in the vineyards. The aim of this study was to determine and compare the soil resistance, soil bulk density and soil moisture within and between rows in the seven-year and thirty-year vineyard due to tillage and compacting by machinery traffic. Results show statistica...

  12. Energy Flow in Agriculture: Bangladesh

    OpenAIRE

    Alam, M. S.; Alam, M. R.; K. K. Islam

    2005-01-01

    In this paper, a qualitative energy flow analysis in Bangladesh agriculture has been made for a period from 1980-81 to 2000-01 to evaluate the impact of energy input to produce output. Human & animal muscle power and machinery energy for tillage operation, electricity and diesel energy for irrigation, fertilizer and pesticides energy for growth and protection are taken into account. Energy values are calculated by multiplying respective quantity by their respective energy equivalents with...

  13. A Study of the Development of Agricultural Mechanization in Kunming

    Institute of Scientific and Technical Information of China (English)

    Wangyun; NING; Yulan; KUANG; Yonghua; ZHANG

    2013-01-01

    Kunming City has entered the rapid development stage of urbanization. In the course of building the urban modern agriculture, the agricultural mechanization of Kunming City is being faced with excellent development opportunity. In this paper, the author scientifically analyzed current development situations of agricultural mechanization in Kunming City and explored existing problems in the course of development. On the basis of analysis, the author put forward recommendations, including increasing scientific research input for agricultural machinery, supporting agricultural machinery enterprises, promoting scientific and technical innovation, taking characteristic industries (such as flowers and vegetables) as pillar industry, speeding up development of modern facility agriculture, and upgrading primary processing of agricultural products. These will play significant role in the development of agricultural mechanization in Kunming City.

  14. 46 CFR 30.10-42 - Machinery space-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Machinery space-TB/ALL. 30.10-42 Section 30.10-42...-42 Machinery space—TB/ALL. The term machinery space means any space that contains machinery and related equipment including Category A machinery spaces, propelling machinery, boilers, oil fuel...

  15. Agriculture and climate change

    International Nuclear Information System (INIS)

    How will increases in levels of CO2 and changes in temperature affect food production? A recently issued report analyzes prospects for US agriculture 1990 to 2030. The report, prepared by a distinguished Task Force, first projects the evolution of agriculture assuming increased levels of CO2 but no climate change. Then it deals with effects of climate change, followed by a discussion of how greenhouse emissions might be diminished by agriculture. Economic and policy matters are also covered. How the climate would respond to more greenhouse gases is uncertain. If temperatures were higher, there would be more evaporation and more precipitation. Where would the rain fall? That is a good question. Weather in a particular locality is not determined by global averages. The Dust Bowl of the 1930s could be repeated at its former site or located in another region such as the present Corn Belt. But depending on the realities at a given place, farmers have demonstrated great flexibility in choosing what they may grow. Their flexibility has been increased by the numerous varieties of seeds of major crops that are now available, each having different characteristics such as drought resistance and temperature tolerance. In past, agriculture has contributed about 5% of US greenhouse gases. Two large components have involved emissions of CO2 from farm machinery and from oxidation of organic matter in soil due to tillage. Use of diesel fuel and more efficient machinery has reduced emissions from that source by 40%. In some areas changed tillage practices are now responsible for returning carbon to the soil. The report identifies an important potential for diminishing net US emissions of CO2 by growth and utilization of biomass. Large areas are already available that could be devoted to energy crops

  16. Analysis of electric machinery and drive systems

    CERN Document Server

    Krause, Paul C; Sudhoff, Scott D; Pekarek, Steven

    2013-01-01

    Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, th

  17. Local Geometrical Machinery for Complexity and Control

    Science.gov (United States)

    Ivancevic, Vladimir G.; Reid, Darryn J.

    2015-11-01

    In this Chapter, we present local geometrical machinery for studying complexity and control, consisting of dynamics on Kähler manifolds, which combine three geometrical structures-Riemannian, symplectic and complex (Hermitian)-in a mutually compatible way. In other words, every Kähler manifold is simultaneously Riemannian, symplectic and complex (Hermitian). It is well known that Riemannian manifolds represent the stage on which Lagrangian dynamics is set, symplectic manifolds represent the stage for Hamiltonian dynamics, and complex (Hermitian) varieties comprise the stage for quantum dynamics. Therefore, Kähler manifolds represent the richest dynamical stage available where Lagrangian, Hamiltonian, and quantum dynamics all dance together.

  18. Mathematical Modeling of the Agriculture Crop Technology

    Directory of Open Access Journals (Sweden)

    D. Drucioc

    1999-02-01

    Full Text Available The organized structure of computer system for economic and ecological estimation of agriculture crop technologies is described. The system is composed of six interconnected blocks. The linear, non-linear and stochastic mathematical models for machinery sizing and selection in farm-level cropping system is presented in the mathematical model block of computer system.

  19. The Mendelian disorders of the epigenetic machinery.

    Science.gov (United States)

    Bjornsson, Hans Tomas

    2015-10-01

    The Mendelian disorders of the epigenetic machinery are genetic disorders that involve disruption of the various components of the epigenetic machinery (writers, erasers, readers, and remodelers) and are thus expected to have widespread downstream epigenetic consequences. Studying this group may offer a unique opportunity to learn about the role of epigenetics in health and disease. Among these patients, neurological dysfunction and, in particular, intellectual disability appears to be a common phenotype; however, this is often seen in association with other more specific features in respective disorders. The specificity of some of the clinical features raises the question whether specific cell types are particularly sensitive to the loss of these factors. Most of these disorders demonstrate dosage sensitivity as loss of a single allele appears to be sufficient to cause the observed phenotypes. Although the pathogenic sequence is unknown for most of these disorders, there are several examples where disrupted expression of downstream target genes accounts for a substantial portion of the phenotype; hence, it may be useful to systematically map such disease-relevant target genes. Finally, two of these disorders (Rubinstein-Taybi and Kabuki syndromes) have shown post-natal rescue of markers of the neurological dysfunction with drugs that lead to histone deacetylase inhibition, indicating that some of these disorders may be treatable causes of intellectual disability. PMID:26430157

  20. Rotating Machinery Predictive Maintenance Through Expert System

    Directory of Open Access Journals (Sweden)

    M. Sarath Kumar

    2000-01-01

    Full Text Available Modern rotating machines such as turbomachines, either produce or absorb huge amount of power. Some of the common applications are: steam turbine-generator and gas turbine-compressor-generator trains produce power and machines, such as pumps, centrifugal compressors, motors, generators, machine tool spindles, etc., are being used in industrial applications. Condition-based maintenance of rotating machinery is a common practice where the machine's condition is monitored constantly, so that timely maintenance can be done. Since modern machines are complex and the amount of data to be interpreted is huge, we need precise and fast methods in order to arrive at the best recommendations to prevent catastrophic failure and to prolong the life of the equipment. In the present work using vibration characteristics of a rotor-bearing system, the condition of a rotating machinery (electrical rotor is predicted using an off-line expert system. The analysis of the problem is carried out in an Object Oriented Programming (OOP framework using the finite element method. The expert system which is also developed in an OOP paradigm gives the type of the malfunctions, suggestions and recommendations. The system is implemented in C++.

  1. Welding technologies for nuclear machinery and equipment

    International Nuclear Information System (INIS)

    The main welding methods applied to nuclear machinery and equipment are shielded metal arc welding, submerged arc welding, MAG welding and TIG welding. But in the last 10 years, in order to improve the reliability required for the welding of nuclear machinery and equipment, the welding technologies aiming at the reduction of heat input, the decrease of the number of welding pass and the automatic control of welding factors have been applied for the main purpose of bettering the quality and excluding human errors. The merits and the technology of narrow gap, pulsed MAG welding and melt-through welding are explained. As the automation of TIG welding, image processing type narrow gap, hot wire TIG welding and remote control type automatic TIG welding are described. For the longitudinal welding of active metal sheet products, plasma key-hole welding is applied. Since the concentration of its arc is good, high speed welding with low heat input can be done. For the stainless steel cladding by welding, electroslag welding has become to be employed in place of conventional submerged arc welding. Arc is not generated in the electroslag welding, and the penetration into base metal is small. (K.I.)

  2. Evolution of the chloroplast division machinery

    Institute of Scientific and Technical Information of China (English)

    Hongbo GAO; Fuli GAO

    2011-01-01

    Chloroplasts are photosynthetic organelles derived from endosymbiotic cyanobacteria during evolution.Dramatic changes occurred during the process of the formation and evolution of chloroplasts,including the large-scale gene transfer from chloroplast to nucleus.However,there are still many essential characters remaining.For the chloroplast division machinery,FtsZ proteins,Ftn2,SulA and part of the division site positioning system- MinD and MinE are still conserved.New or at least partially new proteins,such as FtsZ family proteins FtsZl and ARC3,ARC6H,ARC5,PDV1,PDV2 and MCD1,were introduced for the division of chloroplasts during evolution.Some bacterial cell division proteins,such as FtsA,MreB,Ftn6,FtsW and Ftsl,probably lost their function or were gradually lost.Thus,the chloroplast division machinery is a dynamically evolving structure with both conservation and innovation.

  3. On the mechanochemical machinery underlying chromatin remodeling

    Science.gov (United States)

    Yusufaly, Tahir I.

    This dissertation discuss two recent efforts, via a unique combination of structural bioinformatics and density functional theory, to unravel some of the details concerning how molecular machinery within the eukaryotic cell nucleus controls chromatin architecture. The first, a study of the 5-methylation of cytosine in 5'-CG-3' : 5'-CG-3' base-pair steps, reveals that the methyl groups roughen the local elastic energy landscape of the DNA. This enhances the probability of the canonical B-DNA structure transitioning into the undertwisted A-like and overtwisted C-like forms seen in nucleosomes, or looped segments of DNA bound to histones. The second part focuses on the formation of salt bridges between arginine residues in histones and phosphate groups on the DNA backbone. The arginine residues are ob- served to apply a tunable mechanical load to the backbone, enabling precision-controlled activation of DNA deformations.

  4. Numerical Noise Prediction in Fluid Machinery

    Institute of Scientific and Technical Information of China (English)

    Iris PANTLE; Franco MAGAGNATO; Martin GABI

    2005-01-01

    Numerical methods successively became important in the design and optimization of fluid machinery. However,as noise emission is considered, one can hardly find standardized prediction methods combining flow and acoustical optimization. Several numerical field methods for sound calculations have been developed. Due to the complexity of the considered flow, approaches must be chosen to avoid exhaustive computing. In this contribution the noise of a simple propeller is investigated. The configurations of the calculations comply with an existing experimental setup chosen for evaluation. The used in-house CFD solver SPARC contains an acoustic module based on Ffowcs Williams-Hawkings Acoustic Analogy. From the flow results of the time dependent Large Eddy Simulation the time dependent acoustic sources are extracted and given to the acoustic module where relevant sound pressure levels are calculated. The difficulties, which arise while proceeding from open to closed rotors and from gas to liquid are discussed.

  5. Curved Casimir Operators and the BGG Machinery

    Directory of Open Access Journals (Sweden)

    Andreas Cap

    2007-11-01

    Full Text Available We prove that the Casimir operator acting on sections of a homogeneous vector bundle over a generalized flag manifold naturally extends to an invariant differential operator on arbitrary parabolic geometries. We study some properties of the resulting invariant operators and compute their action on various special types of natural bundles. As a first application, we give a very general construction of splitting operators for parabolic geometries. Then we discuss the curved Casimir operators on differential forms with values in a tractor bundle, which nicely relates to the machinery of BGG sequences. This also gives a nice interpretation of the resolution of a finite dimensional representation by (spaces of smooth vectors in principal series representations provided by a BGG sequence.

  6. Curved Casimir Operators and the BGG Machinery

    Science.gov (United States)

    Cap, Andreas; Soucek, Vladimír

    2007-11-01

    We prove that the Casimir operator acting on sections of a homogeneous vector bundle over a generalized flag manifold naturally extends to an invariant differential operator on arbitrary parabolic geometries. We study some properties of the resulting invariant operators and compute their action on various special types of natural bundles. As a first application, we give a very general construction of splitting operators for parabolic geometries. Then we discuss the curved Casimir operators on differential forms with values in a tractor bundle, which nicely relates to the machinery of BGG sequences. This also gives a nice interpretation of the resolution of a finite dimensional representation by (spaces of smooth vectors in) principal series representations provided by a BGG sequence.

  7. The SNARE machinery in mast cell secretion

    Directory of Open Access Journals (Sweden)

    Axel eLorentz

    2012-06-01

    Full Text Available Mast cells are known as inflammatory cells which exert their functions in allergic and anaphylactic reactions by secretion of numerous inflammatory mediators. During an allergic response, the high-affinity IgE receptor, FcεRI, becomes cross-linked by receptor-bound IgE and antigen resulting in immediate release of pre-synthesized mediators – stored in granules – as well as in de novo synthesis of various mediators like cytokines and chemokines. Soluble N-ethylmaleimide-Sensitive Factor (NSF Attachment Protein (SNAP Receptors (SNARE proteins were found to play a central role in regulating membrane fusion events during exocytosis. In addition, several accessory regulators like Munc13, Munc18, Rab GTPases, SCAMPs, complexins or synaptotagmins were found to be involved in membrane fusion. In this review we summarize our current knowledge about the SNARE machinery and its mechanism of action in mast cell secretion.

  8. Machinery failure analysis and troubleshooting practical machinery management for process plants

    CERN Document Server

    Bloch, Heinz P

    2012-01-01

    Solve the machinery failure problems costing you time and money with this classic, comprehensive guide to analysis and troubleshooting  Provides detailed, complete and accurate information on anticipating risk of component failure and avoiding equipment downtime Includes numerous photographs of failed parts to ensure you are familiar with the visual evidence you need to recognize Covers proven approaches to failure definition and offers failure identification and analysis methods that can be applied to virtually all problem situations Demonstr

  9. Towards Servitization in Finnish SME Machinery Companies Case: Finnish Mid-Sized Machinery Company

    OpenAIRE

    Hakamo, Henri-Erik

    2014-01-01

    Objectives of the Study: The purpose of this study is to explore the transition from product-oriented manufacturing to a service-orientation one. Thus research has following objectives (1) identify the reasons in a mid-sized Finnish manufacturer mowing towards servitization, and (2) identify the challenges facing the Finnish mid-sized machinery manufacturing company in transitioning from product-orientation to service-orientation. Academic background and methodology: In...

  10. 46 CFR 111.103-9 - Machinery stop stations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Machinery stop stations. 111.103-9 Section 111.103-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) ELECTRICAL ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Remote Stopping Systems § 111.103-9 Machinery stop stations. (a) Each forced...

  11. 46 CFR 282.23 - Hull and machinery insurance.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Hull and machinery insurance. 282.23 Section 282.23... COMMERCE OF THE UNITED STATES Calculation of Subsidy Rates § 282.23 Hull and machinery insurance. (a) Subsidy items. The fair and reasonable net premium costs (including stamp taxes) of hull and...

  12. Recession Hits China’s Textile Machinery Markets

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China’s textile machinery industry saw a continued decline intotaI profit and a hefty slump in imports and exports in the first twomonths this year.Analysts anticipated a continued weakening ofmomentum for China’s textile machinery markets owing to weakerconsumer spending and easing export growth.

  13. 33 CFR 157.39 - Machinery space bilges.

    Science.gov (United States)

    2010-07-01

    ... CFR 155.380. ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Machinery space bilges. 157.39... Vessel Operation § 157.39 Machinery space bilges. (a) A tank vessel may discharge an oily mixture from...

  14. Chinese Standards and Safe Use of Stage Machinery

    Institute of Scientific and Technical Information of China (English)

    XU Qi

    2015-01-01

    This paper introduced the domestic stage machinery standards and the situation of introducing foreign standards, as well as the connection between stage machinery safety and a plurality of links such as process conifgurations, third party monitoring, operation and maintenance, stage equipment and risk assessment.

  15. ITALIAN TEXTILE MACHINERY WORKSHOP IN SUZHOU(CHINA)

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The Association of Italian Textile Machinery Manufacturers (ACIMIT)and the Italian Trade Commission(ICE)held a technical workshop on Italian textile machinery for the production of technical textiles and nonwovens in China.The workshop occurred in Suzhou(Juangsu Province),on May 24th-25th,2007.

  16. French Textile Machinery Hanufacturers Success Thanks to Tailor Nade Solutions

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Bruno Ameline,the President and Evelyne Cholet, the Secretary General of UCMTF(French Textile Machinery Manufacturers Association)report on the French textile machinery sector and analyze the main trends which shape the market environment and its future developments.

  17. 46 CFR 119.465 - Ventilation of spaces containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel machinery. 119... MACHINERY INSTALLATION Specific Machinery Requirements § 119.465 Ventilation of spaces containing diesel machinery. (a) A space containing diesel machinery must be fitted with adequate means, such as...

  18. Chinese agriculture

    OpenAIRE

    Macfarlane, Alan; Cullen, Christopher

    2004-01-01

    Standing in a rice field in China, Christopher Cullen describes the great move south between the seventh and tenth centruies in China, and the expansion of wet rice cultivation. Some of the effects of growing rice on the development of machinery and industrialization.

  19. Ribosome evolution: Emergence of peptide synthesis machinery

    Indian Academy of Sciences (India)

    Koji Tamura

    2011-12-01

    Proteins, the main players in current biological systems, are produced on ribosomes by sequential amide bond (peptide bond) formations between amino-acid-bearing tRNAs. The ribosome is an exquisite super-complex of RNA-proteins, containing more than 50 proteins and at least 3 kinds of RNAs. The combination of a variety of side chains of amino acids (typically 20 kinds with some exceptions) confers proteins with extraordinary structure and functions. The origin of peptide bond formation and the ribosome is crucial to the understanding of life itself. In this article, a possible evolutionary pathway to peptide bond formation machinery (proto-ribosome) will be discussed, with a special focus on the RNA minihelix (primordial form of modern tRNA) as a starting molecule. Combining the present data with recent experimental data, we can infer that the peptidyl transferase center (PTC) evolved from a primitive system in the RNA world comprising tRNA-like molecules formed by duplication of minihelix-like small RNA.

  20. TECHNOLOGICAL REFINEMENT OF GRAIN CROP PRODUCTION INVOLVING MACHINERY APPLICATION

    Directory of Open Access Journals (Sweden)

    Maslov G. G.

    2016-01-01

    Full Text Available There have been suggested the courses of the machine technologies refinement in the process of spiked cereals production. The course of their technical update was studied in our previous article. There were analyzed the drawbacks of the modern machine production of crops and we presented the course of their elimination due to the technology optimization, resource and energy preservation, machine technologies of soil improvement and new innovative technological solutions. The suggested technology optimization was designed taking into account rigorous alternation of crops in the rotation, optimizing of breeds and crossbreeds, application of intermediate crops simultaneously with harvesting the previous crop, introducing progressive methods of chemical treatment and synchronous tillage. The resource and energy preservation is based on the combination of technological operations coinciding with the tasks in agricultural terms during a single machinery pass across the field, application of the mobile power unit (UPU-450, low- and ultralow capacity spraying, optimization of choice of certain agrimethods in the process of crop production and the resource calculation of estimated crop yield. In the set of soil improvement courses we have studied the mechanization of the restoration processes of natural soil formation, defecate introduction, the use of stubbly remains, compulsory presence of permanent grasses in crop rotation. New innovative solutions in the crop production technologies include the refinement of the mechanization facilities in tillage, spraying, new methods of crop harvesting (unwinnowed bread, root tow, cleaning of thrashed heap after the harvesting, etc. We have analyzed the ways of mechanization of “organic farming” and seed treatment with biologic mixtures

  1. Transport and machinery accidents in South African underground mines

    Energy Technology Data Exchange (ETDEWEB)

    Gouws, M.J.; Owen-Thomas, D.; Stewart, J.M. [Chamber of Mines of South Africa, Johannesburg (South Africa)

    1997-09-01

    A significant proportion of the total injuries and fatalities in underground coal mines in South African are related to transport and machinery. Data are presented to show that, over the past decade, the injury rate has not declined significantly and that 29% of injuries and 17% of fatalities occurred in the area of transport and machinery. An analysis of transport and machinery accident data is provided, in which accidents are classified by equipment and tasks. A new strategy to improve health and safety in mines is described. 8 refs., 3 figs., 2 tabs., 1 app.

  2. Development and improvement: Status of Textile Machinery Manufacturing in China

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The past over 20 years of reform & open-door practices has witnessed an amazingly rapid development in China’s textile machinery manufacturing.1. The change in the production scale: the number oftextile machinery manufacturers grew from over 150 plants listed exceptionally in the category of textile industrial system in the old traditional planned economy to the over 500 plants that come from all sectors of industries engaged in textile machinery manufacturing in the new socialist market-driven economy. The production output value grew from 870 million RMB(Chinese Yuan) in 1987 to 14.7 billion RMB, 18

  3. Safe design and construction of machinery regulation, practice and performance

    CERN Document Server

    Bluff, Elizabeth

    2015-01-01

    The origin of this book is the compelling evidence that a high proportion of machinery-related deaths and injuries are attributable to genuine and serious risks originating within machine design and construction. This trend continues despite significant legal obligations, notably the European regulatory regime giving effect to the Machinery Directive (among others), and a substantial body of specialist knowledge originating in the disciplines of human factors and safety engineering. Grounded in empirical research with machinery manufacturers, this book aims to elucidate the factors and process

  4. Study on Design Method of New Age Food Machinery

    Directory of Open Access Journals (Sweden)

    Xiaowei Jiang

    2015-04-01

    Full Text Available The study purpose is to investigate an effective design method for food machinery, thereby raising the external appearance quality and pleasant of food machinery, strengthening additional value and whole shape effect of product, satisfying the demand of market competition and creating higher economic efficiency. The study elaborates on the green design, optimal design, concurrent design and bionics design, including the shape bionics, structure bionics, interface bionics and texture bionics, to introduce the great significance of researching food machinery, based on which the conclusion has been reached.

  5. Analysis of Input and Output of China’s Agriculture Based on Canonical Correlation

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    I select effective irrigated area, consumption of agricultural chemical fertilizer, electricity consumed in rural areas, and total power of agricultural machinery as input variables of China’s agriculture; I select grain, bean, tobacco, oil-bearing crop and fruit as output variables of China’s agriculture. By using the data of China Statistical Yearbook in 2010, based on the analysis method of canonical correlation, I conduct research on the input and output of China’s agriculture. The results show that consumption of chemical fertilizer has the biggest impact on the agricultural output of China, followed by the input of total power of agricultural machinery; the canonical variable of agricultural output of China is mainly impacted by grain, oil-bearing crop and fruit; in terms of the selected variables, the output increase of grain, oil-bearing crop and fruit in China arises from the input increase of agricultural chemical fertilizer and machinery, and there is high-degree correlation between the two. According to the conclusions, the policy suggestions are put forward as follows: gradually decrease consumption of chemical fertilizer; increase the use of modern agricultural machinery; increase agricultural irrigation input.

  6. Developing new-generation machinery for vegetation management on protected wetlands in Poland

    Directory of Open Access Journals (Sweden)

    A.P. Dubowski

    2014-08-01

    Full Text Available Many protected wetlands and (especially fen peatlands in Poland require vegetation management to restore and maintain them as breeding areas for endangered bird species. The current practice of harvesting, baling and transporting grasses, reeds and other vegetation using tracked snow groomers and wheeled farm tractors can conflict with the nature conservation goals for these sites through disturbance of the ground surface and accidents leading to spillage of oil. To address these problems, the Industrial Institute of Agricultural Engineering (PIMR is developing new-generation agricultural machinery that will also be applicable in formal paludiculture. This article describes an innovative method for towing large bales of harvested biomass across wetlands that minimises ground pressure using any vehicle, and the development of amphibian tracked (ATV and hovercraft vehicles for biomass harvesting operations in wetlands.

  7. White-Paper Report: Textile Machinery Industry (2005-2009) Economic Performance in Chinese Textile Machinery Industry

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Internal Impacts on Textile Machinery Sector 1.Industrial Scale Like many other industrial sectors,the textile machinery industry was also affected by global financial crisis that led to credit crunch in the important markets where consumers'spending plummeted.The textile machinery manufacturers ran into a lot of problems in the balance sheets when international markets were structured in a way that is different from domestic market in terms of consumers'demand.It is very hard for these manufacturers to gain some market share simply by shifting their export-oriented products to local clients in hope to overcome difficulties.

  8. Taihang Machinery-Growing Steadily amid Economic Gloom

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    With much of Chinese textile industry reeling from marketplace shrinkage,it’s great to report on a company that is thriving—Hebei Taihang Machinery Industries Co.,ltd. and its strategies for success.

  9. Capital formation in machinery and industrialization. Chile 1844-1938

    OpenAIRE

    Ducoing, Cristi??n

    2011-01-01

    The present paper revisits an old theme in Latin American and Chilean economic history; the early industrialization in the XIX - XX centuries. The difference with previous approaches is the elaboration of new quantitative series of Chilean machinery investment in the long run and its relative prices and composition, in the period when some authors have sited the beginning of the industrialization in the continent. Initial findings, based on the participation of capital formation in machinery ...

  10. A Study of Sugarcane Leaf-Removal Machinery during Harvest

    OpenAIRE

    Sopa Cansee1,

    2010-01-01

    Problem statement: Sugarcane leaf-removing tools could help speed up sugarcane harvest and reduce contamination. Moreover, leaf-removal machinery can solve the problems of sugarcane burning and workers can increase sugarcane harvest production too. The purpose of this research was to study the use of leaf-removal machinery in the post-harvest production of sugarcane to reduce harvest production time and contaminant. Approach: This study focused on the LK92-11 variety of sugarcane having a har...

  11. Study on Design Method of New Age Food Machinery

    OpenAIRE

    Xiaowei Jiang

    2015-01-01

    The study purpose is to investigate an effective design method for food machinery, thereby raising the external appearance quality and pleasant of food machinery, strengthening additional value and whole shape effect of product, satisfying the demand of market competition and creating higher economic efficiency. The study elaborates on the green design, optimal design, concurrent design and bionics design, including the shape bionics, structure bionics, interface bionics and texture bionics, ...

  12. Recent Advances in Precision Machinery and Manufacturing Technology

    DEFF Research Database (Denmark)

    Liu, Chien-Hung; Hsieh, Wen-Hsiang; Chang, Zong-Yu;

    2014-01-01

    Precision machinery and manufacturing technology are be- coming more important in current and future technologies. New knowledge in this field will aid in the advancement of various technologies that are needed to gain industrial competitiveness. To this end, the special issue aims to disseminate...... manufacturing systems, sensors and materials, CAD/CAM/CAE for precision machinery, computation/numerical method, intelligent system and ap- proach, vibration engineering, mechanism design, and fluid- dynamics/thermodynamics....

  13. Interactions between Shigella flexneri and the Autophagy Machinery

    OpenAIRE

    Krokowski, Sina; Mostowy, Serge

    2016-01-01

    Autophagy, an intracellular degradation process, is increasingly recognized as having important roles in host defense. Interactions between Shigella flexneri and the autophagy machinery were first discovered in 2005. Since then, work has shown that multiple autophagy pathways are triggered by S. flexneri, and autophagic responses can have different roles during Shigella infection. Here, we review the interactions between S. flexneri and the autophagy machinery, highlighting that studies using...

  14. Marketing in the pre-development process of agricultural machines: a reference model Marketing no pré-desenvolvimento de máquinas agrícolas: um modelo de referência

    OpenAIRE

    Oliveira, Alexandre S.; Arno U. Dallmeyer; Leonardo N. Romano

    2012-01-01

    The theme of the research is the development of the domain of marketing knowledge in the design of agricultural machinery. It is developed throughout the design of agricultural machinery in order to identify the corporate and customers needs and to develop strategies to satisfy these needs. The central problem of the research questions which marketing tools to apply on pre-development process of farm machinery, in order to increase the market value of the products and of the company and, cons...

  15. Precision Agriculture: Global Prospects and Environmental Implications

    OpenAIRE

    Norton, George W.; Swinton, Scott M.

    2000-01-01

    Producers in industrialized countries have been inundated by ideas and information about precision agriculture (PA) and how new site-specific management (SSM) technologies will revolutionize their farm operations. Conjuring up 'Star Wars' imagery, farmers and their computerized machinery communicate with satellites while speeding up and down the information highway. The farm press has hailed the advent of these technologies as a win-win situation, with higher farm profits and improved environ...

  16. 46 CFR 71.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery..., boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the standards... and inspection of hulls, boilers, and machinery, and the certificate of classification...

  17. 46 CFR 62.50-20 - Additional requirements for minimally attended machinery plants.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Additional requirements for minimally attended machinery... requirements for minimally attended machinery plants. Note: Minimally attended machinery plants include vessel machinery plants and spaces that are automated, but not to a degree where the plant could be left...

  18. 46 CFR 169.631 - Separation of machinery and fuel tank spaces from accommodation spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Separation of machinery and fuel tank spaces from...) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.631 Separation of machinery and fuel tank spaces from accommodation spaces. (a) Machinery and fuel tank spaces must...

  19. 46 CFR 169.629 - Compartments containing gasoline machinery or fuel tanks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Compartments containing gasoline machinery or fuel tanks... SCHOOLS SAILING SCHOOL VESSELS Machinery and Electrical Ventilation § 169.629 Compartments containing gasoline machinery or fuel tanks. Spaces containing gasoline machinery or fuel tanks must have...

  20. 46 CFR 189.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... inspection of hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels... chapter, respecting material and construction of hulls, boilers, and machinery, and certificate...

  1. 46 CFR 91.15-1 - Standards in inspection of hulls, boilers, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Standards in inspection of hulls, boilers, and machinery... hulls, boilers, and machinery. In the inspection of hulls, boilers, and machinery of vessels, the..., respecting material and inspection of hulls, boilers, and machinery, and the certificate of...

  2. 30 CFR 75.1725 - Machinery and equipment; operation and maintenance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery and equipment; operation and....1725 Machinery and equipment; operation and maintenance. (a) Mobile and stationary machinery and equipment shall be maintained in safe operating condition and machinery or equipment in unsafe...

  3. Report on the 44th International Symposium: Actual Tasks on Agricultural Engineering, 23rd-26th February 2016, Opatija, Croatia

    Directory of Open Access Journals (Sweden)

    Igor Kovačev

    2016-03-01

    Full Text Available The 44th International Symposium Actual Tasks on Agricultural Engineering was held on 23rd-26th February 2016 in Grand Hotel Adriatic Opatija, Republic of Croatia. The principle Organiser, Agricultural Engineering Department, Faculty of Agriculture, University of Zagreb was supported by the following frameworks: Department of Agricultural Engineering, Faculty of Agriculture, University J.J. Strossmayer, Osijek, Department of Bio-systems Engineering, Faculty of Agriculture and Lifesciences, University of Maribor (Slovenia, Agricultural Institute of Slovenia, National institute for agricultural machinery - INMA Bucharest (Romania and Croatian Agricultural Engineering Society. In addition, CIGR, EurAgEng and AAAE bestowed their support and endorsement on the Event.

  4. INNOVATIONS IN AGRICULTURE AND MANUFACTURING IN SELECTED EU COUNTRIES: A STUDY BASED ON INPUT-OUTPUT TABLES

    OpenAIRE

    Francisco Diniz; Pradip Biswas

    2012-01-01

    The main purpose of this paper is to analyse patterns of innovations in Agricultural and agro-based industries (like agricultural products, food products, textiles, leather, paper, publishing and printing), Mineral based industries (like chemicals, rubber and plastic products, basic metals, fabricated metals) and Machinery including electrical machinery, electronic goods and communications equipment, and transport vehicles industries in selected EU countries, namely France, Germany, Italy, Po...

  5. Health and safety risks in production agriculture.

    Science.gov (United States)

    Von Essen, S G; McCurdy, S A

    1998-01-01

    Production agriculture is associated with a variety of occupational illnesses and injuries. Agricultural workers are at higher risk of death or disabling injury than most other workers. Traumatic injury commonly occurs from working with machinery or animals. Respiratory illness and health problems from exposures to farm chemicals are major concerns, and dermatoses, hearing loss, certain cancers, and zoonotic infections are important problems. Innovative means of encouraging safe work practices are being developed. Efforts are being made to reach all groups of farmworkers, including migrant and seasonal workers, farm youth, and older farmers. PMID:9795581

  6. Why did Wicksell change his mind about the machinery question?

    Directory of Open Access Journals (Sweden)

    Mauro Boianovsky

    2014-01-01

    Full Text Available The article investigates Wicksell's change of mind about the machinery question between 1890 and 1900/1901. Wicksell at first sided with the so-called “compensation theory” that workers are not harmed by the introduction of machinery. In his lecture notes of April 1900, made available here for the first time, Wicksell deployed marginal productivity theory to discuss the effects of labour-saving technical progress, with inconclusive results. Finally, in his published 1901 Lectures and in his 1900 article about marginal productivity, Wicksell claimed that the introduction of machinery increases output and reduces wages. His analysis was based on the demonstration that free competition maximizes output, but not total utility. It is argued that Wicksell's change of mind and his mature formulation of the machinery question result from his critical assessment of the then new concept of Pareto optimality, together with his reinterpretation and rejection of Ricardo's (1821 contention that the introduction of machinery may diminish output and employment.

  7. Low Cost Semi-Autonomous Agricultural Robots In Pakistan-Vision Based Navigation Scalable methodology for wheat harvesting

    OpenAIRE

    Ahmad, Muhammad Zubair; Akhtar, Ayyaz; Khan, Abdul Qadeer; Khan, Amir Ali; Khan, Muhammad Murtaza

    2015-01-01

    Robots have revolutionized our way of life in recent years.One of the domains that has not yet completely benefited from the robotic automation is the agricultural sector. Agricultural Robotics should complement humans in the arduous tasks during different sub-domains of this sector. Extensive research in Agricultural Robotics has been carried out in Japan, USA, Australia and Germany focusing mainly on the heavy agricultural machinery. Pakistan is an agricultural rich country and its economy ...

  8. Analysis on Technology Roadmap of Agricultural Equipment Industry in Chongqing

    Institute of Scientific and Technical Information of China (English)

    Chongjing; TAN; Jin; YE; Shi; YANG

    2014-01-01

    Since the subsidizing agricultural machine purchase was launched in 2004,the agriculture equipment industry in Chongqing has progressed by leaps and bounds,but it is still faced with a few urgent problems,which requires the coordination of stakeholders,with an aim to establish a clear direction of the development of industry and a technology route. With planting industry as an example,this paper applies the principle and method of industry technology roadmap to analyse the market demand,industry target,technology barrier and R & D demand of agricultural equipment industry in Chongqing. Based on the results,the top technology R & D items of agricultural equipment industry in Chongqing are obtained. Finally,the following suggestions are put forward: integrating resources,constructing platform and improving innovation ability; constructing agricultural industry park and promoting clustered development of agricultural equipment industry; strengthening finance and taxation support; strengthening construction of agricultural mechanization infrastructure; substantially developing socialized service of agricultural machinery.

  9. UAV FOR GEODATA ACQUISITION IN AGRICULTUREAL AND FORESTAL APPLICATIONS

    OpenAIRE

    Reidelstürz, P.; Schrenk, L.; Littmann, W.

    2012-01-01

    In the field of precision-farming research, solutions are worked out to combine ecological and economical requirements in a harmonic way. Integrating hightech in agricultural machinery, natural differences in the fields (biodiversity) can be detected and considered to economize agricultural resources and to give respect to natural ecological variability at the same time. Using precision farming resources, machining – and labour time can be economized, productivness can be improved, envi...

  10. An experimental investigation of exhaust emission from agricultural tractors

    OpenAIRE

    Rashid Gholami, Hekmat Rabbani, Ali Nejat Lorestani, Payam Javadikia, Farzad Jaliliantabar

    2013-01-01

    Agricultural machinery is an important source of emission of air pollutant in rural locations. Emissions of a specific tractor engine mainly depend on engine speed. Various driving methods and use of implements with different work capacities can affect the engine load. This study deals with the effects of types of tractors and operation conditions on engine emission. In this study two types of agricultural tractors (MF285 and U650) and some tillage implements such as centrifugal type spreader...

  11. Human Machine Interaction by Simulation of Dynamics of Construction Machinery

    DEFF Research Database (Denmark)

    Langer, Thomas Heegaard

    This industrial Ph.D. project concerns whole-body vibrations in human operated construction machinery. The emissions of these vibrations is closely related to the subjective experience of comfort and in some cases these vibrations can occur in a level which can cause the operator back disorders...... different kinds of machinery; an articulated backhoe loader and an articulated dump truck. In this work a standardized procedure containing a set of duty cycles for measuring and declaring whole-body vibrations has been proposed for both of these machines. The result of the measuring is important...... and optimize the settings of the suspension systems. In general for machinery that is relative complex to operate such as the backhoe loader education carries the highest potential for improving comfort and reduce the vibrations. A dump truck on the other hand is very easy to drive and requires proper...

  12. Structural Insights Into The Bacterial Carbon-Phosphorus Lyase Machinery

    DEFF Research Database (Denmark)

    Brodersen, Ditlev Egeskov

    Phosphonate compounds act as a nutrient source for some microorganisms when phosphate is limiting but require a specialised enzymatic machinery due to the presence of the highly stable carbon-phosphorus bond. Despite the fundamental importance to microbial metabolism, the details of how the prote......Phosphonate compounds act as a nutrient source for some microorganisms when phosphate is limiting but require a specialised enzymatic machinery due to the presence of the highly stable carbon-phosphorus bond. Despite the fundamental importance to microbial metabolism, the details of how...... the reaction. Our results delineate the overall architecture of the carbon-phosphorus lyase machinery and give detailed insight into the mechanism underlying microbial phosphonate breakdown....

  13. Intelligent Control Scheme of Engineering Machinery of Cluster Hybrid System

    Institute of Scientific and Technical Information of China (English)

    GAO Qiang; WANG Hongli

    2005-01-01

    In a hybrid system, the subsystems with discrete dynamics play a central role in a hybrid system. In the course of engineering machinery of cluster construction, the discrete control law is hard to obtain because the construction environment is complex and there exist many affecting factors. In this paper, hierarchically intelligent control, expert control and fuzzy control are introduced into the discrete subsystems of engineering machinery of cluster hybrid system, so as to rebuild the hybrid system and make the discrete control law easily and effectively obtained. The structures, reasoning mechanism and arithmetic of intelligent control are replanted to discrete dynamic, conti-nuous process and the interface of the hybrid system. The structures of three types of intelligent hybrid system are presented and the human experiences summarized from engineering machinery of cluster are taken into account.

  14. Structural insights into the bacterial carbon - phosphorus lyase machinery

    DEFF Research Database (Denmark)

    Seweryn, Paulina; Van, Lan Bich; Kjeldgaard, Morten;

    2015-01-01

    Phosphorus is required for all life and microorganisms can extract it from their environment through several metabolic pathways. When phosphate is in limited supply, some bacteria are able to use phosphonate compounds, which require specialized enzymatic machinery to break the stable carbon......–phosphorus (C–P) bond. Despite its importance, the details of how this machinery catabolizes phosphonates remain unknown. Here we determine the crystal structure of the 240-kilodalton Escherichia coli C–P lyase core complex (PhnG–PhnH–PhnI–PhnJ; PhnGHIJ), and show that it is a two-fold symmetric hetero...

  15. On line diagnostics of rotating machinery using expert system technology

    International Nuclear Information System (INIS)

    Over the last years it became apparent that on line diagnostics will become more and more important for increasing safety in nuclear power plants and the availability of machinery. Expert system technology in combination with conventional methods for pattern recongnition and data preparation turned out to be a favorite candidate for automatic on line diagnostics of rotating machinery and related diagnostical problems. The article describes the conceptual design of an on line diagnostic system for a liquid sodium pump in a nuclear power plant. An overview on the system design, the system parameters, the user interface, and an example for the construction of the knowledge base will be given. (orig.)

  16. Densification of chipper harvested SRC using on-farm machinery

    Energy Technology Data Exchange (ETDEWEB)

    Paulson, M.

    2003-07-01

    This report gives details of a project to density wood chips using on-farm machinery in order to avoid problems encountered in bulk handling and storage of low density short rotation cultivation (SRC) wood chips - especially as some customers can only accept baled material. Trials using different lengths of chips produced by a standard SRC harvester are described, and the failure to produce acceptable bales is reported. The potential cost of modifying equipment is deemed to make the baling of SRC chips using standard farm machinery currently not viable.

  17. A block coupled solver development for hydraulic machinery applications

    International Nuclear Information System (INIS)

    In this paper, a fully coupled block algorithm for the solution of three-dimensional incompressible turbulent flows for use in hydraulic machinery is presented. Due to the simultaneous solution of momentum and continuity equations, implicit block coupling of pressure and velocity variables leads to faster convergence in respect to classical, loosely coupled, segregated algorithms of the SIMPLE family of algorithms. Special linear solver developments were also performed in order to extend the new fully coupled solver to high efficiency HPC simulations. These modifications allow the coupled solver to retain its improved performance and robustness in addition to mesh size scalability while solving hydraulic machinery type applications

  18. Path planning algorithms for a multi-robot framework on an agricultural environment

    DEFF Research Database (Denmark)

    Hameed, Ibrahim

    2016-01-01

    This paper is about the necessity and possibility of developing a new generation of agricultural robots where multiple small robots can be easily and safely used to accomplish agricultural tasks. Heavy tractors and machinery used today compacts the soil, which over time severely deteriorates...

  19. 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations

    CERN Document Server

    Rubini, Riccardo; D'Elia, Gianluca; Cocconcelli, Marco; Chaari, Fakher; Zimroz, Radoslaw; Bartelmus, Walter; Haddar, Mohamed

    2014-01-01

    This book presents the processings of the third edition of the Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO13) which was held in Ferrara, Italy. This yearly event merges an international community of researchers who met – in 2011 in Wroclaw (Poland) and in 2012 in Hammamet (Tunisia) – to discuss issues of diagnostics of rotating machines operating in complex motion and/or load conditions. The growing interest of the industrial world on the topics covered by the CMMNO13 involves the fields of packaging, automotive, agricultural, mining, processing and wind machines in addition to that of the systems for data acquisition.The participation of speakers and visitors from industry makes the event an opportunity for immediate assessment of the potential applications of advanced methodologies for the signal analysis. Signals acquired from machines often contain contributions from several different components as well as noise. Therefore, the major challenge of condition monitoring is to po...

  20. Agricultural Geophysics

    Science.gov (United States)

    The four geophysical methods predominantly used for agricultural purposes are resistivity, electromagnetic induction, ground penetrating radar (GPR), and time domain reflectometry (TDR). Resistivity and electromagnetic induction methods are typically employed to map lateral variations of apparent so...

  1. Agriculture: access to technology limited.

    Science.gov (United States)

    1997-01-01

    From country to country and even regionally, the roles of women in agriculture vary, but most of their labor is in unpaid subsistence production and their contributions tend to be underestimated, according to the results of the [UN] Secretary-General's report. Depending on circumstances, they have complementary roles with men, sharing or dividing tasks in the production of crops, care of animals, and forestry management. In sub-Saharan Africa, for example, women contribute 60-80% of labor in food production for both household consumption and sale, while in Malaysia the women account for only 35% of the agricultural labor force, and in Ireland the participation rate is only 10.4%. Although women make this important amount of labor contributions to agricultural production, "development policies tend to favor export crops to earn foreign exchange and the agricultural research tends to address the improvement of production and technologies for commercial production". This results in limited access for women to technical knowledge and innovations, including irrigation, machinery, farming techniques and extension services. This is strengthened by the fact that most of the extension services target farmers who own land and can obtain credit to invest in input and technology. PMID:12293737

  2. Rapid Growth of China Petroleum Machinery Manufacturing (continued)

    Institute of Scientific and Technical Information of China (English)

    Huang Zhiqian; Sun Zuchen; Wang Keyu

    1996-01-01

    @@ Technology for petroleum machinery design and manufacturing upgraded remarkably The basic research on rock bit. drilling pump. pump valve, piston, flooding pumps, derrick, shale shaker.hydraulic blowout preventer, torque converter, pumping unit. sucker rod. submersible pump. fracturing pump centrifugal pump. pneumatic parts, geophone and acquisition station has reached the advanced international level.

  3. 46 CFR 169.315 - Ventilation (other than machinery spaces).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation (other than machinery spaces). 169.315 Section 169.315 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) NAUTICAL SCHOOLS SAILING SCHOOL VESSELS Construction and Arrangement Hull Structure § 169.315 Ventilation (other than...

  4. Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier

    Film Bearings: Towards more Efficient Machinery" was aimed at improving the state of the art regarding the usage of fluid film bearings as "smart" machine elements. Specifically, this project dealt with a tilting pad journal bearing design that features a controllable lubrication system, capable...

  5. Design and modelling of innovative machinery systems for large ships

    DEFF Research Database (Denmark)

    Larsen, Ulrik

    power outputs with a much simpler process layout in comparison. The toxic ammonia-water working fluid of the Kalina cycle is problematic for the use in marine machinery rooms, and so are the highly flammable ORC working fluids. Based on the analyses, no configuration of the Kalina cycle is recommended...

  6. PTP1B targets the endosomal sorting machinery

    DEFF Research Database (Denmark)

    Stuible, Matthew; Abella, Jasmine V; Feldhammer, Matthew;

    2010-01-01

    STAM2 specifically suppressed Akt activation, and a phosphorylation-deficient STAM2 mutant displayed prolonged localization on endosomes following EGF stimulation. These results reveal a novel link between the dephosphorylation and endocytic machinery and suggest that PTP1B can affect RTK signaling...

  7. An Automated Control System for Machinery Parts Machining

    Science.gov (United States)

    Petreshin, D. I.; Handozhko, A. V.; Fedonin, O. N.

    2016-04-01

    The article deals with the problem of creating an automated system for controlling surface layer quality characteristics of machinery parts during machining. An automated system structure, its operation algorithm, mathematical support and work results are provided. The paper proves the necessity of using a self-learning mode in technological systems for providing set values of surface layer quality characteristics.

  8. The capacity of sugar beet farms’ machinery and equipment

    Directory of Open Access Journals (Sweden)

    Małgorzata BZOWSKA – BAKALARZ

    2012-12-01

    Full Text Available The survey investigates into equipment of sugar beet farms of the Lublin region, Poland, with machinery – with reference to plantation size and yields. To assess the production potential of the farms, the authors determined the age structure of the machinery owned by the farmers and established the scale of investment in new equipment. The machinery most important for sugar beet production are pre-sowing and post-harvest tillage units, sprayers, seed drills, combine harvesters and self-unloading trailers. In most cases, the surveyed farmers own most of these machines, but they are often obsolete: 37% of them is in operation for more than 15 years. As for the machines dedicated solely to sugar beet growing (harvesters and seeders, their age structure is most unfavourable – 70% of them have been used for over 15 years. A trend towards increasing plantation sizes provides incentives for introducing innovation to cultivation methods. However, the scale of investment in new machinery is small, especially in the case of small and medium-sized farms that dominate in the region. The authors surveyed also the scale of using professional services in the field of tillage processes to determine changes in farming practices.

  9. Modulation of intracellular caspase machinery using organ culture approach

    Czech Academy of Sciences Publication Activity Database

    Matalová, Eva; Fleischmannová, Jana; Norek, Adam; Míšek, Ivan

    Brno : Fyziologický ústav LF MU, 2007, 8P. [Fyziologické dny /83./. Brno (CZ), 06.02.2007-08.02.2007] Institutional research plan: CEZ:AV0Z50450515 Keywords : caspase machinery Subject RIV: EB - Genetics ; Molecular Biology

  10. Market demand analysis of textile machinery industry in 2008

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Textile machinery industry is one important part concerning the development of textile industry,and its developing technical level symbolizes the advanced production force of textile industry and its advanced technology and independent innovation have much to do with the structural adjustment and technical progress of textile industry as well as the further improvement of labor capacity.

  11. The Architectural Organization of Human Stem Cell Cycle Regulatory Machinery

    OpenAIRE

    Stein, Gary S.; Stein, Janet L.; van Wijnen, Andre J.; Lian, Jane B.; Montecino, Martin; Medina, Ricardo(Instituto de Matemática e Computação, Universidade Federal de Itajubá, Itajubá, Minas Gerais, Brazil); Kapinas, Kristie; Ghule, Prachi; Grandy, Rodrigo; Zaidi, Sayyed K.; Becker, Klaus A.

    2012-01-01

    Two striking features of human embryonic stem cells that support biological activity are an abbreviated cell cycle and reduced complexity to nuclear organization. The potential implications for rapid proliferation of human embryonic stem cells within the context of sustaining pluripotency, suppressing phenotypic gene expression and linkage to simplicity in the architectural compartmentalization of regulatory machinery in nuclear microenvironments is explored. Characterization of the molecular...

  12. Diabetic Retinopathy and Damage to Mitochondrial Structure and Transport Machinery

    OpenAIRE

    Zhong, Qing; Kowluru, Renu A.

    2011-01-01

    Retinal mitochondria fusionγÇôfission and protein import machinery are severely affected in diabetes, and reversal of hyperglycemia fails to provide any benefit to these abnormalities, suggesting their role in the development and in the continued progression of diabetic retinopathy.

  13. Poškodbe s traktorji in obdelovalnimi stroji pri otrocih: Tractor and farm machinery related injuries in children:

    OpenAIRE

    Aleš, Andrej; Gracar, Irena; Primožič, Janez

    2006-01-01

    We analysed injuries in children caused by tractors and other agricultural machinery. Retrospective overview of health records of children admitted to hospital between 1 January, 2001, and 31 December, 2004. We found 45 children,aged 7.2 years on average (SD 2.3, range 17 months - 14 years). Therewere 39 boys (87%) and 6 (13%) girls. The injuries were caused by tractorin 28 (62%) children; the children were involved in the accidents as passengers on farming cart in 4 (10%) cases, when moving ...

  14. 49 CFR 1242.42 - Administration, repair and maintenance, machinery repair, equipment damaged, dismantling retired...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Administration, repair and maintenance, machinery repair, equipment damaged, dismantling retired property, fringe benefits, other casualties and insurance... maintenance, machinery repair, equipment damaged, dismantling retired property, fringe benefits,...

  15. Agricultural sector

    International Nuclear Information System (INIS)

    The applications of nuclear technology in agriculture sector cover the use of the technology at every aspects of agricultural activity, starting from the seed to harvesting as well as the management of plantations itself. In this sector, a total of 55 entities comprising 17 public agencies and 38 private companies were selected for the study. Almost all, 91 % of them are located in Peninsular Malaysia; the rest operates in Sabah and Sarawak. The findings of the study in the public agencies and private companies are presented in the next sections. (author)

  16. Agricultural methanization

    International Nuclear Information System (INIS)

    After having briefly outlined the interest of the development of methanization of agricultural by-products in the context of struggle against climate change, and noticed that France is only now developing this sector as some other countries already did, this publication describes the methanization process also called anaerobic digestion, which produces a digestate and biogas. Advantages for the agriculture sector are outlined, as well as drawbacks and recommendations (required specific technical abilities, an attention to the use of energetic crops, an improved economic balance which still depends on public subsidies, competition in the field of waste processing). Actions undertaken by the ADEME are briefly evoked

  17. 46 CFR 30.10-6a - Category A machinery space-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery space-TB/ALL. 30.10-6a Section 30... Definitions § 30.10-6a Category A machinery space—TB/ALL. The term Category A machinery space means any space and trunks and ducts to such a space that contains: (a) Internal combustion machinery used for...

  18. 30 CFR 57.3430 - Activity between machinery or equipment and the highwall or bank.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Activity between machinery or equipment and the... AND NONMETAL MINES Ground Control Precautions-Surface Only § 57.3430 Activity between machinery or equipment and the highwall or bank. Persons shall not work or travel between machinery or equipment and...

  19. 46 CFR 167.65-60 - Examination of boilers and machinery by engineer.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Examination of boilers and machinery by engineer. 167.65... machinery by engineer. It shall be the duty of an engineer when he assumes charge of the boilers and machinery of a nautical school ship to examine the same forthwith and thoroughly, and if he finds any...

  20. 77 FR 64462 - Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries

    Science.gov (United States)

    2012-10-22

    ... Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries AGENCY: Manufacturing... December 4, 2012 the Office of Transportation and Machinery will hold a one-day conference on bi-lateral and multi-lateral international trade issues impacting the U.S. machinery manufacturing...

  1. 40 CFR 180.521 - Fumigants for grain-mill machinery; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Fumigants for grain-mill machinery... Tolerances § 180.521 Fumigants for grain-mill machinery; tolerances for residues. (a) General. Fumigants may be safely used in or on grain-mill machinery in accordance with the following prescribed...

  2. 46 CFR 32.56-30 - Category A machinery spaces: Bulkheads and decks-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Bulkheads and decks-T/ALL... EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-30 Category A machinery spaces: Bulkheads and decks—T/ALL....

  3. 46 CFR 174.200 - Damaged stability in machinery spaces for all OSVs.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Damaged stability in machinery spaces for all OSVs. 174... Vessels § 174.200 Damaged stability in machinery spaces for all OSVs. Each OSV must be shown by design... case of damage between any two watertight bulkheads in each machinery space....

  4. 46 CFR 97.15-15 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Examination of boilers and machinery. 97.15-15 Section... VESSELS OPERATIONS Tests, Drills, and Inspections § 97.15-15 Examination of boilers and machinery. It shall be the duty of the chief engineer when assuming charge of the boilers and machinery of a vessel...

  5. 46 CFR 78.17-30 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Examination of boilers and machinery. 78.17-30 Section... OPERATIONS Tests, Drills, and Inspections § 78.17-30 Examination of boilers and machinery. It shall be the duty of the chief engineer when assuming charge of the boilers and machinery of a vessel to...

  6. 9 CFR 318.24 - Product prepared using advanced meat/bone separation machinery; process control.

    Science.gov (United States)

    2010-01-01

    .../bone separation machinery; process control. 318.24 Section 318.24 Animals and Animal Products FOOD.../bone separation machinery; process control. (a) General. Meat, as defined in § 301.2 of this subchapter... this subchapter, using advances in mechanical meat/bone separation machinery (i.e., AMR systems)...

  7. 30 CFR 57.3460 - Maintenance between machinery or equipment and ribs.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maintenance between machinery or equipment and... NONMETAL MINES Ground Control Precautions-Underground Only § 57.3460 Maintenance between machinery or equipment and ribs. Persons shall not perform maintenance work between machinery or equipment and...

  8. 49 CFR 173.222 - Dangerous goods in equipment, machinery or apparatus.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Dangerous goods in equipment, machinery or... Than Class 1 and Class 7 § 173.222 Dangerous goods in equipment, machinery or apparatus. Hazardous materials in machinery or apparatus are excepted from the specification packaging requirements of...

  9. 76 FR 67181 - Windsor Machinery Co., Inc.; Notice of Preliminary Permit Application Accepted for Filing and...

    Science.gov (United States)

    2011-10-31

    ... Energy Regulatory Commission Windsor Machinery Co., Inc.; Notice of Preliminary Permit Application..., 2011, Windsor Machinery Co., Inc. filed an application for a preliminary permit, pursuant to section 4... an annual generation of 1,600 megawatt-hours. Applicant Contact: Sarah L. Bower, Windsor Machinery...

  10. 33 CFR 150.620 - What are the requirements for protecting personnel from machinery?

    Science.gov (United States)

    2010-07-01

    ... machinery through the use of guard devices or other measures that comply with 29 CFR 1910.212, or through... protecting personnel from machinery? 150.620 Section 150.620 Navigation and Navigable Waters COAST GUARD... Health Machine Guards § 150.620 What are the requirements for protecting personnel from machinery?...

  11. 46 CFR 32.56-40 - Category A machinery spaces: Insulation-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Insulation-T/ALL. 32.56-40..., MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-40 Category A machinery spaces: Insulation—T/ALL. Structural...

  12. 49 CFR 393.130 - What are the rules for securing heavy vehicles, equipment and machinery?

    Science.gov (United States)

    2010-10-01

    ..., equipment and machinery? 393.130 Section 393.130 Transportation Other Regulations Relating to Transportation... heavy vehicles, equipment and machinery? (a) Applicability. The rules in this section apply to the transportation of heavy vehicles, equipment and machinery which operate on wheels or tracks, such as front...

  13. 46 CFR 62.50-30 - Additional requirements for periodically unattended machinery plants.

    Science.gov (United States)

    2010-10-01

    ... section 4-6-4/13.5 of the ABS Steel Vessel Rules (incorporated by reference; see 46 CFR 62.05-1). (d... machinery plants. 62.50-30 Section 62.50-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED... requirements for periodically unattended machinery plants. Note: Periodically unattended machinery...

  14. 46 CFR 177.620 - Ventilation of machinery and fuel tank spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of machinery and fuel tank spaces. 177.620... (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Ventilation § 177.620 Ventilation of machinery and... containing machinery or fuel tanks must comply with the requirements of part 182 of this chapter....

  15. 46 CFR 116.620 - Ventilation of machinery and fuel tank spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Ventilation of machinery and fuel tank spaces. 116.620... AND ARRANGEMENT Ventilation § 116.620 Ventilation of machinery and fuel tank spaces. In addition to the requirements of this subpart, ventilation systems for spaces containing machinery or fuel...

  16. 46 CFR 153.233 - Separation of tanks from machinery, service and other spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Separation of tanks from machinery, service and other... Design and Equipment Cargo Containment Systems § 153.233 Separation of tanks from machinery, service and... joint: (1) Machinery spaces. (2) Service spaces. (3) Accommodation spaces. (4) Spaces for...

  17. 46 CFR 196.15-15 - Examination of boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Examination of boilers and machinery. 196.15-15 Section... VESSELS OPERATIONS Test, Drills, and Inspections § 196.15-15 Examination of boilers and machinery. (a) It shall be the duty of the chief engineer when he assumes charge of the boilers and machinery of a...

  18. 30 CFR 56.3430 - Activity between machinery or equipment and the highwall or bank.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Activity between machinery or equipment and the... NONMETAL MINES Ground Control Precautions § 56.3430 Activity between machinery or equipment and the highwall or bank. Persons shall not work or travel between machinery or equipment and the highwall or...

  19. 30 CFR 77.404 - Machinery and equipment; operation and maintenance.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Machinery and equipment; operation and... OF UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.404 Machinery and equipment; operation and maintenance. (a) Mobile and stationary machinery and equipment shall be maintained in...

  20. 46 CFR 167.15-25 - Inspection standards for hulls, boilers and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Inspection standards for hulls, boilers and machinery... machinery. Except as otherwise provided by law or regulations in this subpart, the following standards shall... Classing Steel Vessels” regarding the construction of hulls, boilers and machinery in effect on the date...

  1. 46 CFR 32.35-1 - Boilers and machinery-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Boilers and machinery-TB/ALL. 32.35-1 Section 32.35-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Main and Auxiliary Machinery § 32.35-1 Boilers and machinery—TB/ALL. Boilers, main and...

  2. 46 CFR 182.465 - Ventilation of spaces containing diesel machinery.

    Science.gov (United States)

    2010-10-01

    ..., with ventilation installations in accordance with ABYC H-32 (incorporated by reference; see 46 CFR 175... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing diesel machinery. 182... VESSELS (UNDER 100 GROSS TONS) MACHINERY INSTALLATION Specific Machinery Requirements §...

  3. 40 CFR Appendix A to Part 438 - Typical Products in Metal Products and Machinery Sectors

    Science.gov (United States)

    2010-07-01

    ... Machinery Sectors A Appendix A to Part 438 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS METAL PRODUCTS AND MACHINERY POINT SOURCE CATEGORY Pt. 438, App. A Appendix A to Part 438—Typical Products in Metal Products and Machinery Sectors AEROSPACE...

  4. The trend of German packaging machinery design%德国包装机械设计趋势

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Germany, the US, Japan and Italy are among the world big packaging machinery countries. The German packaging machinery takes the lead in the fields of design, manufacture and technical performance. German packaging machinery valued at Euro 3.4 billion in 2002.70%of the European packaging machinery is made by Germany. Germany exports 77% packaging machinery; amounting to 29% of the export market of the world packaging machinery.

  5. How Polyomaviruses Exploit the ERAD Machinery to Cause Infection.

    Science.gov (United States)

    Dupzyk, Allison; Tsai, Billy

    2016-01-01

    To infect cells, polyomavirus (PyV) traffics from the cell surface to the endoplasmic reticulum (ER) where it hijacks elements of the ER-associated degradation (ERAD) machinery to penetrate the ER membrane and reach the cytosol. From the cytosol, the virus transports to the nucleus, enabling transcription and replication of the viral genome that leads to lytic infection or cellular transformation. How PyV exploits the ERAD machinery to cross the ER membrane and access the cytosol, a decisive infection step, remains enigmatic. However, recent studies have slowly unraveled many aspects of this process. These emerging insights should advance our efforts to develop more effective therapies against PyV-induced human diseases. PMID:27589785

  6. Recent Advances in Precision Machinery and Manufacturing Technology

    OpenAIRE

    Liu, Chien-Hung; Hsieh, Wen-Hsiang; Chang, Zong-Yu; Tzou, Gow-Yi; Hanson, Steen Grüner; Hwang, Yunn-Lin

    2014-01-01

    Precision machinery and manufacturing technology are be- coming more important in current and future technologies. New knowledge in this field will aid in the advancement of various technologies that are needed to gain industrial competitiveness. To this end, the special issue aims to disseminate the latest advancements of relevant fundamental and applied research works of high quality to the inter- national community. The topics of the accepted articles in the special issue include precision...

  7. Pictet–Spengler reaction-based biosynthetic machinery in fungi

    OpenAIRE

    Yan, Wei; Ge, Hui Ming; Wang, Gang; Jiang, Nan; Mei, Ya Ning; Jiang, Rong; Li, Sui Jun; Chen, Chao Jun; Jiao, Rui Hua; Xu, Qiang; Ng, Seik Weng; Tan, Ren Xiang

    2014-01-01

    The Pictet–Spengler (PS) reaction constructs many important phytochemicals such as morphine and camptothecin, but it has not yet been noticed in the fungal kingdom. Here, the startup of the PS reaction-based silent fungal biosynthetic machinery is presented to generate unforeseeably “unnatural” natural products of unprecedented carbon skeletons with antibacterial and acetylcholinesterase inhibitory activities. The gene-implied enzyme inhibition strategy is introduced to facilitate understandi...

  8. Selling Machinery to China: Chinese Perceptions of Strategies and Relationships

    OpenAIRE

    Norman McGuinness; Nigel Campbell; James Leontiades

    1991-01-01

    Chinese perceptions of machinery suppliers from six countries are used to evaluate supplier strategies and the customer relationships formed. Strategies based on product quality and service had the greatest impact on preferences. The relationship formed seemed to reflect mainly the perceived value of the product service-package offered. “Friendship” in the traditional Chinese sense did not seem to be a strong characteristic of these relationships.© 1991 JIBS. Journal of International Business...

  9. The Diagnosis of Reciprocating Machinery by Bayesian Networks

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A Bayesian Network is a reasoning tool based on probability theory and has many advantages that other reasoning tools do not have. This paper discusses the basic theory of Bayesian networks and studies the problems in constructing Bayesian networks. The paper also constructs a Bayesian diagnosis network of a reciprocating compressor. The example helps us to draw a conclusion that Bayesian diagnosis networks can diagnose reciprocating machinery effectively.

  10. A Study of Sugarcane Leaf-Removal Machinery during Harvest

    Directory of Open Access Journals (Sweden)

    Sopa Cansee

    2010-01-01

    Full Text Available Problem statement: Sugarcane leaf-removing tools could help speed up sugarcane harvest and reduce contamination. Moreover, leaf-removal machinery can solve the problems of sugarcane burning and workers can increase sugarcane harvest production too. The purpose of this research was to study the use of leaf-removal machinery in the post-harvest production of sugarcane to reduce harvest production time and contaminant. Approach: This study focused on the LK92-11 variety of sugarcane having a harvesting period of 12 months, a density of 9,387 stems/rai and could produce 14.01 tons/rai including cane top and, leaves and leaf sheaths of 1675.2 and 180 kg/rai. Sugarcane leaf-removal machinery was applied to a small engine power from a grass-cutting machine. A rotate dish applied 4 different materials, tendon string, soft wire, medium wire and sling for sugarcane leaf-removing. The machine was operated at a constant speed. The efficiency of the sugarcane leaf-removal machinery indicated the capacity of sugarcane leaf-removing by area and operation time. Results: The quantity of leaves and leaf sheaths affect the speed of harvest production. Moreover, leaves and leaf sheaths increase the waste material in production and also contaminate the sugar and the sugar production system with clay, sand, and mud from the fields. Traditional methods for sugarcane harvest without removing leaf took 37 h/rai to complete, but sugarcane leaf-removing could reduce the sugarcane harvest process to 11.4 h/rai. Conclusion: The material of the blades in de-leafing machine is crucial to the efficiency of harvest production time. Blades made from poor materials can cause tangling and clogging in the rotator dish, which increases maintenance time. Further developments in sugarcane leaf removal systems will create dramatic improvement in sugarcane production.

  11. The protein machinery of vesicle budding and fusion.

    OpenAIRE

    Rothman, J E

    1996-01-01

    A general protein machinery that buds and fuses transport vesicles is harnessed to generate the complex web of intracellular transport pathways critical for such diverse processes as cell growth, endocytosis, hormone release, and neurotransmission. With this appreciation, the challenge of understanding the precise molecular mechanisms of these many facets of cell biology has been reduced to a series of problems in protein structure and chemistry.

  12. CFD Analysis of Cavitation Erosion Potential in Hydraulic Machinery

    Czech Academy of Sciences Publication Activity Database

    Sedlář, M.; Zima, Patrik; Müller, M.

    Brno : University of Technology, 2009 - (Rudolf, P.), s. 205-214 ISBN 978-80-214-3947-4. [IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems /3./. Brno (CZ), 14.10.2009-16.10.2009] R&D Projects: GA ČR(CZ) GA101/07/1612 Institutional research plan: CEZ:AV0Z20760514 Keywords : cavitation erosion * bubble dynamics * CFD analysis Subject RIV: BK - Fluid Dynamics

  13. Dedicated monitoring and machinery protection systems on reciprocating compressors

    Energy Technology Data Exchange (ETDEWEB)

    Grande, Alvaro; Wenisch, Markus [Hoerbiger Ventilwerke GmbH and Co KG, Wien (Austria); Jacobs, Denis [HOERBIGER do Brasil Industria de Equipamentos, Cajamar, SP (Brazil)

    2012-07-01

    Growing demands on reciprocating compressors (recips) in the process gas industry require particular solutions for machinery protection and performance monitoring systems. Compared to rotating equipment, monitoring systems for recips have to consider the special mechanical and physical characteristics, such as oscillating masses, variable vibration behaviour and varying operating conditions. Furthermore, they provide valuable information about the performance of cylinder related components allowing the operator the optimization of efficiency and availability, and therefore increase production. (author)

  14. Wireless Condition-based Maintenance System for Rotating Machinery

    OpenAIRE

    Tran, Van Tung

    2011-01-01

    Condition-based maintenance (CBM) presently plays an important role in avoiding unexpected failures, improving machine reliability, and providing accurate maintenance records and activities for rotating machinery. Traditional wired sensors commonly used for gathering data are costly and of limited value in industry. Recently, together with the advancement of sensor technology and communication networks, sensors have been virtually metamorphosed into smaller, cheaper, and more intelligent ones...

  15. Rotating machinery prognostics: State of the art, challenges and opportunities

    Science.gov (United States)

    Heng, Aiwina; Zhang, Sheng; Tan, Andy C. C.; Mathew, Joseph

    2009-04-01

    Machinery prognosis is the forecast of the remaining operational life, future condition, or probability of reliable operation of an equipment based on the acquired condition monitoring data. This approach to modern maintenance practice promises to reduce downtime, spares inventory, maintenance costs, and safety hazards. Given the significance of prognostics capabilities and the maturity of condition monitoring technology, there have been an increasing number of publications on rotating machinery prognostics in the past few years. These publications covered a wide spectrum of prognostics techniques. This review article first synthesises and places these individual pieces of information in context, while identifying their merits and weaknesses. It then discusses the identified challenges, and in doing so, alerts researchers to opportunities for conducting advanced research in the field. Current methods for predicting rotating machinery failures are summarised and classified as conventional reliability models, condition-based prognostics models and models integrating reliability and prognostics. Areas in need of development or improvement include the integration of condition monitoring and reliability, utilisation of incomplete trending data, consideration of effects from maintenance actions and variable operating conditions, derivation of the non-linear relationship between measured data and actual asset health, consideration of failure interactions, practicability of requirements and assumptions, as well as development of performance evaluation frameworks.

  16. Production method of hydrogen jet plasma process in hydro machinery

    International Nuclear Information System (INIS)

    The purpose of present paper is to the process of plasma formation in hydro machinery when a hydro turbine operates at various conditions and load rejection. By investigation the power, shock pressure , and impact effects of hydro machinery, it is revealed that energy and hydrogen are generated by the plasma process. The investigation on several turbines of various hydro power plants reveals that cold fusion process in hydro machinery generates hydrogen. The hypothesis concerning the participation of alkaline metals in river water and the atomic nuclei of the runner blade material in the formation of hydrogen are considered. It is possible to assume hydrogen, deuterium, helium, and tritium atoms (based on Dr. Mizuno and Dr. Kanarev theories) that are formed, diffuse into cavitation bubbles. The plasma is generated during the collapse of the bubble; thus, the quantity of burnt hydrogen determine the volume of generating hydrogen and the impact force caused by hydrogen explosion (noise).There are five main notions, which can determine hydrogen and plasma process: (1) turbine power effect, (2) high shock pressure, (3) crack on turbine parts, (4) impacts effects and (4) the lift of rotating parts. The frequency of the excitation lies in a range from 0.786 to 1.095 Hz.In future, it may be possible to design hydro turbines based on the plasma process that generates hydrogen; or there may exist turbines that rotate with a mixture of hydrogen explosion and water energies

  17. Agricultural radioecology

    International Nuclear Information System (INIS)

    The problem of radioactive pollution of ecosystems is discussed. The total deposition of 90Sr and 137Cs after the nuclear experiments in 1945-1963 and the contamination rate of main foodstuffs are assessed. Data about radionuclide dynamics in soil, raw materials, forage, milk, milk products and wheat after the Chernobyl accident are presented for various regions of Bulgaria and are compared with the total fallout contamination. The trends in milk and forage contamination for some regions are discussed. Quantitative radiochemical methods for determination of 90Sr and 137Cs are discussed. Migration of 135Cs, 90Sr and 131J is followed in soil, forage, animal organism and human food chains respectively and ways of decontamination are discussed. Radiation effects on biogeocenoses are described. The problem of agriculture management under the conditions of durable soil contamination after nuclear accidents is considered. Recommendations for monitoring and protection of agricultural personnel are presented. 53 refs., 31 tabs., 93 figs

  18. Alternative Agriculture

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Will the popularization of bioenergy, a new source for powering China, trigger another agricultural revolution? Skyrocketing energy prices, especially the oil shock in the first half of 2005, are pushing China to seek more substitutes for gasoline. A number of cities are turning to ethanol-blended gas made from com. Starting this month, the sale of regular gasoline will be brought to an end in nine of China's

  19. Agricultural problems

    International Nuclear Information System (INIS)

    Although there were not reasons to deplore against major activity release from any of the 110 industrial reactors authorized to operate in US, the nuclear incident that occurred at the Three Mile Island Plant in 1979 urged the public conscience toward the necessity of readiness to cope with events of this type. The personnel of the Emergency Planning Office functioning in the frame of US Department of Agriculture has already participated in around 600 intervention drillings on a federal, local or state scale to plan, test or asses radiological emergency plans or to intervene locally. These exercises allowed acquiring a significant experience in elaborating emergency plans, planning the drillings, working out scenarios and evaluation of the potential impact of accidents from the agricultural point of view. We have also taken part in different international drillings among which the most recent are INEX 1 and RADEX 94. We have found on these occasions that the agricultural problems are essential preoccupations in most of the cases no matter if the context is international, national, local or of state level. The paper poses problems specifically related to milk, fruits and vegetables, soils, meat and meat products. Finally the paper discusses issues like drilling planning, alarm and notification, sampling strategy, access authorizations for farmers, removing of contamination wastes. A number of social, political and economical relating problems are also mentioned

  20. Risk assessments and safe machinery ensuring compliance with the EU directives

    CERN Document Server

    Jespen, Torben

    2016-01-01

    This book describes the prerequisites for the placing on the market and the safe use of machinery in compliance with the relevant EU Directives, especially the Machinery Directive 2006/42. It provides readers with high-level knowledge concerning the Essential Health and Safety Requirements (EHSR) that machinery must fulfill. The approach and principles of the Machinery Directive were most recently made worldwide acknowledged in the ILO code of practice on safe machinery, released in 2013. The book addresses that code, as well as providing valuable insight into other EU Product and Workplace legislation. Focusing on the key aspect of safe machinery, the “machinery safety risk assessment”, which allows readers to better understand the more difficult aspects of risk assessments, the book equips readers to tackle problems at the manufacturing stage and in different use scenarios, introducing them to risk reduction techniques and functional safety aspects.

  1. 农机购置补贴政策经济影响的一般均衡分析%The General Equilibrium Analysis of the Economic Impact of the Farm Machinery Purchase Subsidiary Policy

    Institute of Scientific and Technical Information of China (English)

    刘合光; 谢思娜

    2014-01-01

    为定量分析农机购置补贴政策对农业生产与国民经济的影响,利用投入产出表数据编制 SAM 表,采用GAMS程序建立CGE 模型,对农机购置补贴政策进行了模拟分析。结果表明:农机购置补贴政策有利于减少农业生产的劳动力投入,促进农村剩余劳动力向二、三产业转移;农机购置补贴金额增加将导致农业部门及其他部门的产出增加、产品价格下降,同时提高居民的消费效用,促进农业部门的出口增加、进口减少。为进一步提高我国农业劳动生产率和农产品国际竞争力,建议进一步丰富农机购置补贴形式,扩大农机购置补贴种类,加强农机购置补贴监管。%In order to evaluate the quantitative impact of the farm machinery purchase subsidy on agricultural production and the national economy , the paper complicates a Social Accounting Matrix table with the 2007 input-output data and builds up a CGE model to simulate and analyze the farm machinery purchase subsidiary policy with the GAMS program . The results show that: the farm machinery purchase subsidy policy helps to reduce the labor input of agricultural pro -duction and promote the transfer of rural surplus labors to the secondary and tertiary industries .In addition, increasing the amount of farm machinery purchase subsidy will increase the output of the agricultural sector and other sectors , lower the product price , improve the residents'consumption utility and increase the export and reduce the import of the agricul-tural sector .To further enhance the agricultural labor productivity and competitiveness of agricultural products , it is rec-ommended to further enrich the subsidiary forms , expand the subsidized agricultural machinery types and strengthen the regulation in agricultural machinery purchase subsidies .

  2. Application of fiber-reinforced polymers to rotating superconducting machinery

    International Nuclear Information System (INIS)

    The use of superconductors in rotating electrical machinery results in high rotor stresses at cryogenic temperatures, and requires the availability of structural materials that must meet stringent performance requirements. This paper discusses the potential advantages of composite materials for such applications, the range of properties that may be achieved, and some preliminary experimental data that help define that potential. Some of the factors that arise due to anisotropy in terms of a particular design problem are considered. These are related to the example of a torque tube suitable for use in a superconducting ac generator

  3. Parallel Simulation of 3-D Turbulent Flow Through Hydraulic Machinery

    Institute of Scientific and Technical Information of China (English)

    徐宇; 吴玉林

    2003-01-01

    Parallel calculational methods were used to analyze incompressible turbulent flow through hydraulic machinery. Two parallel methods were used to simulate the complex flow field. The space decomposition method divides the computational domain into several sub-ranges. Parallel discrete event simulation divides the whole task into several parts according to their functions. The simulation results were compared with the serial simulation results and particle image velocimetry (PIV) experimental results. The results give the distribution and configuration of the complex vortices and illustrate the effectiveness of the parallel algorithms for numerical simulation of turbulent flows.

  4. Agricultural sustainability: concepts, principles and evidence.

    Science.gov (United States)

    Pretty, Jules

    2008-02-12

    Concerns about sustainability in agricultural systems centre on the need to develop technologies and practices that do not have adverse effects on environmental goods and services, are accessible to and effective for farmers, and lead to improvements in food productivity. Despite great progress in agricultural productivity in the past half-century, with crop and livestock productivity strongly driven by increased use of fertilizers, irrigation water, agricultural machinery, pesticides and land, it would be over-optimistic to assume that these relationships will remain linear in the future. New approaches are needed that will integrate biological and ecological processes into food production, minimize the use of those non-renewable inputs that cause harm to the environment or to the health of farmers and consumers, make productive use of the knowledge and skills of farmers, so substituting human capital for costly external inputs, and make productive use of people's collective capacities to work together to solve common agricultural and natural resource problems, such as for pest, watershed, irrigation, forest and credit management. These principles help to build important capital assets for agricultural systems: natural; social; human; physical; and financial capital. Improving natural capital is a central aim, and dividends can come from making the best use of the genotypes of crops and animals and the ecological conditions under which they are grown or raised. Agricultural sustainability suggests a focus on both genotype improvements through the full range of modern biological approaches and improved understanding of the benefits of ecological and agronomic management, manipulation and redesign. The ecological management of agroecosystems that addresses energy flows, nutrient cycling, population-regulating mechanisms and system resilience can lead to the redesign of agriculture at a landscape scale. Sustainable agriculture outcomes can be positive for food

  5. Department of Agriculture

    Science.gov (United States)

    ... Safety Forestry Housing Assistance Laws and Regulations Organic Agriculture Outreach Plant Health Research and Science Rural and ... Agricultural Research Agricultural Statistics Economic Research Food and Agriculture Research OPEDA Scholarship Program MARKETING AND TRADE Exporting ...

  6. Fuel use and emissions from non-road machinery in Denmark from 1985-2004 - and projections from 2005-2030

    International Nuclear Information System (INIS)

    This report documents the updated 1985-2004 fuel use and emission inventory for non road machinery and recreational craft in Denmark. The inventory comprises the emission components of SO2, NOx, NMVOC, CH4, CO, CO2, N2O, NH3 and TSP, and in addition a fuel use and emission forecast is presented from 2005-2030. The calculated results are grouped into the sub-sectors agriculture, forestry, industry, household/gardening and inland waterways, according to the structure of the CollectER database used for all Danish sources. The report explains the existing EU emission directives for non road machinery, the actual fuel use and emission factors used, sources of background and operational data, calculation methods and the calculated fuel use and emission results. (au)

  7. Countermeasure for Construction Machinery Produced using 5Why Technique

    Directory of Open Access Journals (Sweden)

    Dong Gil SHIN

    2015-08-01

    Full Text Available A variety of perspectives and opinions on the causes of construction machinery-related accidents were collected through a questionnaire survey and direct interviews with management supervisors, operators, etc. The accident causes will be analyzed using 5Whys technique for major construction machinery disaster case. Improvement ideas will be suggested with an aspect of technical training, management system in the study. In the case of tower cranes, some of the risk factors are being neglected in formal inspections. The reliability of the maintenance performed by rental companies is low. Moreover, in the case of big cranes, unsatisfactory installation and dismantling teams with insufficient expertise can be assigned to sites. There is no process for checking this onsite and management supervisors may just neglect the safety supervision of the installation/dismantling work due to insufficient experience. Excavator accidents cannot be eradicated, e.g. with buckets falling due to the lack of fixing of the bucket's safety device during operation. Crashing and jamming accidents involving workers and excavators have occurred due to the lack of placement of full-time guiders and the lack of excavator control around the sites.

  8. Intelligent condition-based prediction of machinery reliability

    Science.gov (United States)

    Heng, Aiwina; Tan, Andy C. C.; Mathew, Joseph; Montgomery, Neil; Banjevic, Dragan; Jardine, Andrew K. S.

    2009-07-01

    The ability to forecast machinery failure is vital to reducing maintenance costs, operation downtime and safety hazards. Recent advances in condition monitoring technologies have given rise to a number of prognostic models that attempt to forecast machinery health based on condition data. This paper presents a novel approach for incorporating population characteristics information and suspended condition trending data of historical units into prognosis. The population characteristics information extracted from statistical failure distribution enables longer-range prognosis. The accurate modelling of suspended data is also found to be of great importance, since in practice machines are rarely allowed to run to failure and hence data are commonly suspended. The proposed model consists of a feed-forward neural network whose training targets are asset survival probabilities estimated using a variation of the Kaplan-Meier estimator and a degradation-based failure probability density function (PDF) estimator. The trained network is capable of estimating the future survival probabilities of an operating asset when a series of condition indices are inputted. The output survival probabilities collectively form an estimated survival curve. Pump vibration data were used for model validation. The proposed model was compared with two similar models that neglect suspended data, as well as with a conventional time series prediction model. The results support our hypothesis that the proposed model can predict more accurately and further ahead than similar methods that do not include population characteristics and/or suspended data in prognosis.

  9. Rapid detection of biothreat agents based on cellular machinery.

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Todd W.; Gantt, Richard W.

    2004-12-01

    This research addresses rapid and sensitive identification of biological agents in a complex background. We attempted to devise a method by which the specificity of the cellular transcriptional machinery could be used to detect and identify bacterial bio-terror agents in a background of other organisms. Bacterial cells contain RNA polymerases and transcription factors that transcribe genes into mRNA for translation into proteins. RNA polymerases in conjunction with transcription factors recognize regulatory elements (promoters) upstream of the gene. These promoters are, in many cases, recognized by the polymerase and transcription factor combinations of one species only. We have engineered a plasmid, for Escherichia coli, containing the virA promoter from the target species Shigella flexneri. This promoter was fused to a reporter gene Green Fluorescent Protein (GFP). In theory the indicator strain (carrying the plasmid) is mixed with the target strain and the two are lysed. The cellular machinery from both cells mixes and the GFP is produced. This report details the results of testing this system.

  10. Towards a comprehensive understanding of brain machinery by correlative microscopy

    Science.gov (United States)

    Allegra Mascaro, Anna Letizia; Silvestri, Ludovico; Sacconi, Leonardo; Pavone, Francesco S.

    2015-06-01

    Unraveling the complexity of brain structure and function is the biggest challenge of contemporary science. Due to their flexibility, optical techniques are the key to exploring this intricate network. However, a single imaging technique can reveal only a small part of this machinery due to its inherent multilevel organization. To obtain a more comprehensive view of brain functionality, complementary approaches have been combined. For instance, brain activity was monitored simultaneously on different spatiotemporal scales with functional magnetic resonance imaging and calcium imaging. On the other hand, dynamic information on the structural plasticity of neuronal networks has been contextualized in a wider framework combining two-photon and light-sheet microscopy. Finally, synaptic features have been revealed on previously in vivo imaged samples by correlative light-electron microscopy. Although these approaches have revealed important features of brain machinery, they provided small bridges between specific spatiotemporal scales, lacking an omni-comprehensive view. In this perspective, we briefly review the state of the art of correlative techniques and propose a wider methodological framework fusing multiple levels of brain investigation.

  11. Stochastic methods of machinery enterprise endogenous innovative potential realization management

    Directory of Open Access Journals (Sweden)

    Mosin Oleksandr Oleksandrovich

    2014-12-01

    Full Text Available The aim of the article. The goal of the article is definition of effective stochastic methods of management of realization of the endogenous innovative potential (EIP of machine-building enterprise through forecasting of enterprise’s level of gross profit on the basis of values of its reserves which constitute EIP. The results of the analysis. Theoretical approaches to management of the machinery enterprise’s innovative development need to be verified by empirical researches. Evaluation of the enterprise’s innovative potential may become crucial for R&D management. Systematization and comparing methods were used to generalize ongoing approaches to enterprise innovative potential determination; deduction method was used for defining the characteristics of the machinery enterprise innovative potential. Various methods of the enterprise innovative potential development management are considered in the article. Special attention is paid to classification of approaches to definition an essence of innovative process. Development of comprehensive approach to choosing the methods of innovative potential management is based on the classification of innovations by their types. Some of the given methods can be applied to management of several types of innovations. So method of the assessment of investment efficiency indicators can be used both for management of product and technological innovations, and method of definition of a stage of innovative development can be applied for both organizational and product innovations. Thus, the scientific novelty of the research is the application of comprehensive approach to enterprise innovative potential development on the basis of allocation of types of introduced innovations and respective methods of management. At the same time further research should consider a problem of definition of an optimum ratio of quantity of introduced technological, product and organizational innovations. It is necessary to

  12. A Modelling Approach to Multibody Dynamics of Fluid Power Machinery with Hydrodynamic Lubrication

    DEFF Research Database (Denmark)

    Johansen, Per; Rømer, Daniel; Andersen, Torben Ole; Pedersen, Henrik C.

    The efficiency potential of the digital displacement technology and the increasing interest in hydraulic transmissions in wind and wave energy applications has created an incentive for development of high efficiency fluid power machinery. Modelling and analysis of fluid power machinery loss mecha...... coupled with multibody dynamics models. The focus of the current paper is an approach where the transient pressure field in hydrodynamic lubricated joint clearances are modelled by a set of control volumes and coupled with the fluid power machinery mechanics....

  13. Agricultural Production Efficiency of Chongqing Based on DEA

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Literatures about agricultural production efficiency are reviewed.Concept of DEA Method,as well as the definition methods of effective DEA and scale efficiency increase are introduced.According to the relevant statistical data in the years 1997-2007 in Chongqing Municipality,efficiency of agricultural economy is calculated from the year 1997 to 2007 by DEA method and the scale efficiency is also analyzed by taking the total output of agriculture,forestry,animal husbandry and fishery industry as the output index.And the input index includes total workforce in agriculture,forestry,animal husbandry and fishery,the total sown area of crops,the total power of agricultural machinery,chemical fertilizer application,the draft animal,and the effective irrigation area.Result shows that Chongqing City became a municipality directly under the central government;its agricultural production efficiency is still low.And the sustainable development capacity of agricultural is weak in Chongqing,and the agricultural resources are not fully used.Based on this,related suggestions are put forward to improve the agricultural production efficiency of Chongqing,such as implementing an appropriate management scale of land,improving the organization degree of peasant households and the rate of industrialization management,enhancing the quality of the rural labor force,strengthening the agricultural science and technology input and extension,perfecting the construction of rural infrastructure,and improving the rate of resource utilization.

  14. Agriculture ideas and modernization of agriculture

    OpenAIRE

    Li Kangmin

    2011-01-01

    The development of agriculture has its own history from primitive agriculture, traditional agriculture to modem agriculture. Is it a historical road we must follow?Human being had experienced a long history of living on collection and hunting for about 2,000 to 3,000 millenniums since human being appeared on earth. After we settled down, another 10 millenniums passed. Human being began to cultivate crops and raise animals. Thus, we entered the primitive agriculture stage. The primitive agricu...

  15. Research Progress of Pepper Primary Processing Machinery%胡椒初加工机械研究进展

    Institute of Scientific and Technical Information of China (English)

    葛畅; 李玉林; 张园; 李明福

    2014-01-01

    Pepper ( Piper nigrum L .) is one of the characteristics of agricultural products , but Hainan pepper industry is lag behind in Vietnam , Malaysia and other countries .Develop small-scale pepper primary processing machinery not only ensure the quality of products , but also improve the economic efficiency .In order to provide a reference to the researchers, this paper summarized research progress of pepper primary processing machinery at home and abroad .%胡椒是海南特色农产品之一,但海南胡椒产业仍落后于越南、马来西亚等国家。开发适合于农户小规模加工的胡椒初加工机械,不仅可以保证胡椒产品的质量,还可提高产品的经济效益。为此,对胡椒初加工机械的国内外研究概况进行了综述,为胡椒初加工机械研究人员提供参考。

  16. Integrated logistics management system for operation of machinery and equipment

    Directory of Open Access Journals (Sweden)

    Józef Frąś

    2014-09-01

    Full Text Available Background: The main issue in the operations of machinery and equipment, which is the subject of theoretical and empirical research is to provide high reliability and durability with qualitative post-trade services of machinery and equipment. Quality of service can be achieved through planned maintenance activities supported by computer technology. The article presents the concept of an integrated system of logistics management operation of machinery and equipment, especially special one for stationary transport equipment. At the outset, it emphasized the importance and essence of technological transport and storage systems storage in modern manufacturing enterprise. Then the objective and the method of research have been set. An essential part of deliberations in the article is the concept of integrated logistics management system operation for stationary transport equipment. Authors of this article have presented the results the implementation and operation of the system. The results are presented in a descriptive and graphic form. Methods: The purpose of this article is to present the concept of implementing an integrated logistics management system for operation of stationary transport equipment. It goes through combination of planning, event logging service, warehouse management in the field of spare parts, account and records of the cost of service activities. The paper presents an analysis and evaluation method of brainstorming a new approach to logistics management operation stationary transport equipment. Authors takes into account the specific conditions of use of transport equipment and conduct the service, which have a significant impact on the time and place of cost and service as well. It should be noted that the developed system has been implemented. It was also carried out an assessment of its functionality and efficiency as the new IT tool for logistics management operation. Results and conclusions: The paper presents a new

  17. Analysis of Factors Influencing Development of Resource-saving and Environment-friendly Agriculture in China

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    By selecting the data from 1989 to 2009 in China, we conduct regression analysis on the total output value of agriculture, the usage amount of chemical fertilizer, total power of agricultural machinery, effective irrigation area, and the damage area. The results show that the usage amount of chemical fertilizer and the damage area, the great obstacle to the construction of resource-saving and environment-friendly agriculture, have significant impact on the output value of agriculture; total power of agricultural machinery and effective irrigation area have insignificant impact on the output value of agriculture. Based on these, the suggestions for promoting the development of resource-saving and environment-friendly agriculture are put forward as follows: transform agricultural production mode, and optimize the industrial structure of agriculture; promote scientific use of chemical fertilizer, and promote the ability of agriculture to resist risks; promote the development of biogas in rural areas, and carry out the comprehensive use of biological material resources in rural areas.

  18. Sustainable Agriculture: An Update

    OpenAIRE

    Tisdell, Clement A.

    2012-01-01

    Provides some background on concerns about the sustainability of agriculture, outlines and discusses views about what constitutes sustainable agriculture and contrasts the sustainability of modern industrialised agriculture with that of traditional agriculture. Then the question is considered (taking into account the available evidence) whether organic agriculture is more sustainable than non-organic agriculture. Barriers to switching from non-organic to organic agriculture are mentioned. The...

  19. Autophagic machinery activated by dengue virus enhances virus replication

    International Nuclear Information System (INIS)

    Autophagy is a cellular response against stresses which include the infection of viruses and bacteria. We unravel that Dengue virus-2 (DV2) can trigger autophagic process in various infected cell lines demonstrated by GFP-LC3 dot formation and increased LC3-II formation. Autophagosome formation was also observed under the transmission electron microscope. DV2-induced autophagy further enhances the titers of extracellular and intracellular viruses indicating that autophagy can promote viral replication in the infected cells. Moreover, our data show that ATG5 protein is required to execute DV2-induced autophagy. All together, we are the first to demonstrate that DV can activate autophagic machinery that is favorable for viral replication

  20. Cell surface recycling in yeast: mechanisms and machineries.

    Science.gov (United States)

    MacDonald, Chris; Piper, Robert C

    2016-04-15

    Sorting internalized proteins and lipids back to the cell surface controls the supply of molecules throughout the cell and regulates integral membrane protein activity at the surface. One central process in mammalian cells is the transit of cargo from endosomes back to the plasma membrane (PM) directly, along a route that bypasses retrograde movement to the Golgi. Despite recognition of this pathway for decades we are only beginning to understand the machinery controlling this overall process. The budding yeastSaccharomyces cerevisiae, a stalwart genetic system, has been routinely used to identify fundamental proteins and their modes of action in conserved trafficking pathways. However, the study of cell surface recycling from endosomes in yeast is hampered by difficulties that obscure visualization of the pathway. Here we briefly discuss how recycling is likely a more prevalent process in yeast than is widely appreciated and how tools might be built to better study the pathway. PMID:27068957

  1. Segmented infrared image analysis for rotating machinery fault diagnosis

    Science.gov (United States)

    Duan, Lixiang; Yao, Mingchao; Wang, Jinjiang; Bai, Tangbo; Zhang, Laibin

    2016-07-01

    As a noncontact and non-intrusive technique, infrared image analysis becomes promising for machinery defect diagnosis. However, the insignificant information and strong noise in infrared image limit its performance. To address this issue, this paper presents an image segmentation approach to enhance the feature extraction in infrared image analysis. A region selection criterion named dispersion degree is also formulated to discriminate fault representative regions from unrelated background information. Feature extraction and fusion methods are then applied to obtain features from selected regions for further diagnosis. Experimental studies on a rotor fault simulator demonstrate that the presented segmented feature enhancement approach outperforms the one from the original image using both Naïve Bayes classifier and support vector machine.

  2. Ultra-short pulses to signal neuronal growth cone machinery

    Science.gov (United States)

    Mathew, Manoj; Amat-Roldan, Ivan; Andres, Rosa; Cormack, Iain G.; Artigas, David; Soriano, Eduardo; Loza-Alvarez, Pablo

    2007-02-01

    Measurable change in the sensory motor machinery of growth cones are induced by non contact femtosecond laser. The focused laser beam with an average power of 3 mW was positioned at some distance away from the closest fillopodia of cortical neurons from primary cell cultures (mice E15). By identifying a set of preliminary parameters we were able to statistically analyze the phenomenological behavior of the fillopodia and classify the effects different conditions of laser light has on the growth cone. Results show that fillopodia become significantly biased towards the focused femtosecond laser light. The same experiment performed with continuous wave (CW) produced results which were indistinguishable from the case where there is no laser light present (placebo condition) indicating no clear effects of the CW laser light on the fillopodia at a distance. These findings show the potential for ultrashort pulsed light to become a new type of pathfinding cue for neuronal growth cones.

  3. Hormonal control of the metabolic machinery of hepatocellular carcinoma

    Science.gov (United States)

    Wong, Carmen Chak-Lui; Wong, Chun-Ming

    2016-01-01

    Hepatocellular carcinoma (HCC) is one of the most fatal malignancies worldwide. It is an aggressive cancer with low cure rate, frequent metastasis, and highly resistant to conventional chemotherapies. Better knowledge regarding the molecular and metabolic alterations in HCC will be instrumental to the development of novel therapeutic interventions against HCC. In the August 2015 issue of Hepatology, Nie et al. reports an important molecular pathway that contributes to the Warburg Effect in HCC. They have beautifully demonstrated that the loss of a component of a hormonal system, the mineralocorticoid receptor (MR), reprogrammed the metabolic machinery of HCC cells to aerobic glycolysis through the miR-338-3p-PKL/R axis. The implication could be that in addition to drugs that directly target the metabolic enzymes in cancer cells, more translational efforts could be focused on the development of drugs that involve the activation of the MR-aldosterone system or other hormonal systems to target the Warburg effect.

  4. Ubiquitin is part of the retrovirus budding machinery

    Science.gov (United States)

    Patnaik, Akash; Chau, Vincent; Wills, John W.

    2000-11-01

    Retroviruses contain relatively large amounts of ubiquitin, but the significance of this finding has been unknown. Here, we show that drugs that are known to reduce the level of free ubiquitin in the cell dramatically reduced the release of Rous sarcoma virus, an avian retrovirus. This effect was suppressed by overexpressing ubiquitin and also by directly fusing ubiquitin to the C terminus of Gag, the viral protein that directs budding and particle release. The block to budding was found to be at the plasma membrane, and electron microscopy revealed that the reduced level of ubiquitin results in a failure of mature virus particles to separate from each other and from the plasma membrane during budding. These data indicate that ubiquitin is actually part of the budding machinery.

  5. Vibration analysis for trending ageing in rotating machinery

    International Nuclear Information System (INIS)

    The need for condition monitoring system for important equipment and machinery is a growing requirement in every industry and more so in the nuclear power plants because of stringent safety requirements. This is largely because of the inherent benefit of being able to promote predictive maintenance practice rather than uneconomical preventive maintenance practice in the plant. Forerunner among the condition monitoring parameter is vibration signatures measured on a rotating machine. It is known that every moving element in a rotating machine generates vibration signal that is uniquely its own. Detection of such signals and monitoring the changing conditions in a machine through vibration analysis is a technique involving the knowledge of engineering art and the mathematical theory. This blend of sound engineering judgement and vibration data interpretation skill is in fact the basis of vibration diagnostic techniques. (author)

  6. Monitoring of vibrating machinery using artificial neural networks

    International Nuclear Information System (INIS)

    The primary source of vibration in complex engineering systems is rotating machinery. Vibration signatures collected from these components render valuable information about the operational state of the system and may be used to perform diagnostics. For example, the low frequency domain contains information about unbalance, misalignment, instability in journal bearing and mechanical looseness; analysis of the medium frequency range can render information about faults in meshing gear teeth; while the high frequency domain will contain information about incipient faults in rolling-element bearings. Trend analysis may be performed by comparing the vibration spectrum for each machine with a reference spectrum and evaluating the vibration magnitude changes at different frequencies. This form of analysis for diagnostics is often performed by maintenance personnel monitoring and recording transducer signals and analyzing the signals to identify the operating condition of the machine. With the advent of portable fast Fourier transform (FFT) analyzers and ''laptop'' computers, it is possible to collect and analyze vibration data an site and detect incipient failures several weeks or months before repair is necessary. It is often possible to estimate the remaining life of certain systems once a fault has been detected. RMS velocity, acceleration, displacements, peak value, and crest factor readings can be collected from vibration sensors. To exploit all the information embedded in these signals, a robust and advanced analysis technique is required. Our goal is to design a diagnostic system using neural network technology, a system such as this would automate the interpretation of vibration data coming from plant-wide machinery and permit efficient on-line monitoring of these components

  7. Managing the exploitation life of the mining machinery for a limited duration of time

    Directory of Open Access Journals (Sweden)

    Vujić Slobodan

    2010-01-01

    Full Text Available The paper discusses the theoretical concept and illustrates the practical application of models with limited interval based on dynamic programming, suitable for optimization of exploitation life of mining machinery that have a shorter life cycle such as: bulldozers, scrapers, dumpers, excavators equipped by a smaller capacity operating element, as well as some others machinery.

  8. 46 CFR 28.840 - Means for stopping pumps, ventilation, and machinery.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Means for stopping pumps, ventilation, and machinery. 28.840 Section 28.840 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY UNINSPECTED VESSELS... pumps, ventilation, and machinery. All electrically driven fuel oil transfer pumps, fuel oil unit...

  9. 46 CFR 35.25-1 - Examination of boilers and machinery by engineer-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Examination of boilers and machinery by engineer-T/ALL. 35.25-1 Section 35.25-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS OPERATIONS Engine Department § 35.25-1 Examination of boilers and machinery by engineer—T/ALL. It shall be the...

  10. 29 CFR 1918.98 - Qualifications of machinery operators and supervisory training.

    Science.gov (United States)

    2010-07-01

    .... 12111-12117), the regulations implementing Title I (29 CFR Part 1630), and the Technical Assistance... 29 Labor 7 2010-07-01 2010-07-01 false Qualifications of machinery operators and supervisory... General Working Conditions. § 1918.98 Qualifications of machinery operators and supervisory training....

  11. 49 CFR 1242.47 - Machinery (account XX-27-40).

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Machinery (account XX-27-40). 1242.47 Section 1242.47 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION...-Equipment § 1242.47 Machinery (account XX-27-40). Separate common expenses on the basis of the...

  12. 46 CFR 111.103-1 - Power ventilation systems except machinery space ventilation systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Power ventilation systems except machinery space ventilation systems. 111.103-1 Section 111.103-1 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... Power ventilation systems except machinery space ventilation systems. Each power ventilation system...

  13. The Influence of Auto-Steer on Machinery Selection and Land Acquisition

    OpenAIRE

    Shockley, Jordan; Dillon, Carl R.; Stombaugh, Timothy S.

    2012-01-01

    With the growing advancements in technology increasingly available to farmers, there is a need to recognize this influence when making farm management decisions. This study investigated the influence of auto-steer navigation on machinery selection and land investment decisions by developing a multifaceted machinery management model.

  14. A Method of Rotating Machinery Fault Diagnosis Based on the Close Degree of Information Entropy

    Institute of Scientific and Technical Information of China (English)

    GENG Jun-bao; HUANG Shu-hong; JIN Jia-shan; CHEN Fei; LIU Wei

    2006-01-01

    This paper presents a method of rotating machinery fault diagnosis based on the close degree of information entropy. In the view of the information entropy, we introduce four information entropy features of the rotating machinery, which describe the vibration condition of the machinery. The four features are, respectively, denominated as singular spectrum entropy, power spectrum entropy, wavelet space state feature entropy and wavelet power spectrum entropy. The value scopes of the four information entropy features of the rotating machinery in some typical fault conditions are gained by experiments, which can be acted as the standard features of fault diagnosis. According to the principle of the shorter distance between the more similar models, the decision-making method based on the close degree of information entropy is put forward to deal with the recognition of fault patterns. We demonstrate the effectiveness of this approach in an instance involving the fault pattern recognition of some rotating machinery.

  15. Agricultural Tariff Tracker

    Data.gov (United States)

    Foreign Agricultural Service, Department of Agriculture — The Agricultural Tariff Tool is a web application that queries tariff schedules and rate information resulting from Free Trade Agreements (FTAs). All...

  16. An SVM-Based Classifier for Estimating the State of Various Rotating Components in Agro-Industrial Machinery with a Vibration Signal Acquired from a Single Point on the Machine Chassis

    OpenAIRE

    Ruben Ruiz-Gonzalez; Jaime Gomez-Gil; Francisco Javier Gomez-Gil; Víctor Martínez-Martínez

    2014-01-01

    The goal of this article is to assess the feasibility of estimating the state of various rotating components in agro-industrial machinery by employing just one vibration signal acquired from a single point on the machine chassis. To do so, a Support Vector Machine (SVM)-based system is employed. Experimental tests evaluated this system by acquiring vibration data from a single point of an agricultural harvester, while varying several of its working conditions. The whole process included two m...

  17. Climate design of vegetable oil fuels for agricultural equipment; Klimadesign von Pflanzenoelkraftstoffen fuer landwirtschaftliche Maschinen

    Energy Technology Data Exchange (ETDEWEB)

    Stoehr, Michael [B.A.U.M. Consult GmbH, Muenchen (Germany). International and Energy Projects; Pickel, Peter [John Deere European Technology Innovation Center, Kaiserslautern (Germany)

    2012-07-01

    The use of biofuels in agricultural machinery is an option for complying with climate protection requirements that are presently discussed to be placed on manufacturers of mobile off-road machinery by the European Commission. A mathematical model has been developed that allows calculating greenhouse gas emissions (GHGE) of biofuels for complex production paths in a straightforward, transparent manner and in pattern with the EU's Fuel Quality Directive (FQD). Therewith it has been shown that both rape seed and camelina sativa oil fuels can save more than 60 % GHGE. Key parameters have been identified and rules for a climate design of vegetable oil fuels have been formulated. (orig.)

  18. Assessing of energy policies based on Turkish agriculture:

    International Nuclear Information System (INIS)

    In this study, the current energy status of Turkey and the effects of national energy policies on Turkish agricultural support policies are discussed for both current and future requirements. Turkey is an energy-importing country producing 30 mtoe (million tons of oil equivalent) energy but consuming 80 mtoe. The energy import ratio of Turkey is 65-70% and the majority of this import is based on petroleum and natural gas. Furthermore, while world energy demand increases by 1.8% annually, Turkey's energy demand increases by about 8%. Although energy consumption in agriculture is much lower than the other sectors in Turkey, energy use as both input and output of agricultural sector is a very important issue due to its large agricultural potential and rural area. Total agricultural land area is 27.8 million hectares and about 66.5% of this area is devoted for cereal production. On the other hand, Turkey has over 4 million agricultural farm holdings of which 70-75% is engaged in cereal production. Machinery expenses, mainly diesel, constitute 30-50% of total variable expenses in cereal production costs. It is observed that energy policies pursued in agriculture have been directly affected by diesel prices in Turkey. Therefore, support policy tools for using diesel and electricity in agriculture are being pursued by the Turkish government

  19. Assessing of energy policies based on Turkish agriculture:

    Energy Technology Data Exchange (ETDEWEB)

    Sayin, Cengiz [Department of Agricultural Economics, Akdeniz University, 07070 Antalya (Turkey)] e-mail: csayin@akdeniz.edu.tr; Nisa Mencet, M. [Department of Agricultural Economics, Akdeniz University, 07070 Antalya (Turkey); Ozkan, Burhan [Department of Agricultural Economics, Akdeniz University, 07070 Antalya (Turkey)] e-mail: bozkan@akdeniz.edu.tr

    2005-12-01

    In this study, the current energy status of Turkey and the effects of national energy policies on Turkish agricultural support policies are discussed for both current and future requirements. Turkey is an energy-importing country producing 30 mtoe (million tons of oil equivalent) energy but consuming 80 mtoe. The energy import ratio of Turkey is 65-70% and the majority of this import is based on petroleum and natural gas. Furthermore, while world energy demand increases by 1.8% annually, Turkey's energy demand increases by about 8%. Although energy consumption in agriculture is much lower than the other sectors in Turkey, energy use as both input and output of agricultural sector is a very important issue due to its large agricultural potential and rural area. Total agricultural land area is 27.8 million hectares and about 66.5% of this area is devoted for cereal production. On the other hand, Turkey has over 4 million agricultural farm holdings of which 70-75% is engaged in cereal production. Machinery expenses, mainly diesel, constitute 30-50% of total variable expenses in cereal production costs. It is observed that energy policies pursued in agriculture have been directly affected by diesel prices in Turkey. Therefore, support policy tools for using diesel and electricity in agriculture are being pursued by the Turkish government.

  20. Network Based Real Time Condition Monitoring of Rotating Machinery

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    This paper presents the development of a network based real time condition monitoring system of rotating machinery. The system is built up in a double net structure consisting of local net (including client and server) and intranet. The client serves as a field data collector and processor that samples the vibration signals and process parameters of a machine monitored in the net and processes the sampled data. The data collected by the client are transmitted to the server that processes the data further and provides the results of the diagnosis of each machine to any distant terminals through intranet or internet. Such a structure of the monitoring system is advantageous in safety, reliability and reasonably shares the existing net resources. In order to ensure real time transmission of the data, two procedures of data transmission, virtual channel and data pool, are developed and applied in the monitoring system. The experimental results show that the monitoring system works well and is suitable to monitor a large group of rotating machines.

  1. Condition monitoring of machinery using motor current signature analysis

    International Nuclear Information System (INIS)

    Motor current signature analysis (MCSA) is a powerful monitoring tool for motor-driven equipment that provides a nonintrusive means for detecting the presence of mechanical and electrical abnormalities in the motor and the driven equipment, including altered conditions in the process ''downstream'' of the motor-driven equipment. It was developed at the Oak Ridge National Laboratory as a means for determining the effects of aging and service wear systems, but it is applicable to a broad range of machinery. MCSA is based on the recognition that an electric motor (ac or dc) driving a mechanical load acts as an efficient and permanently available transducer by sensing mechanical load variations, large and small, long-term and rapid, and converting them into variations in the induced current generated in the motor windings. These motor current variations are carried by the electrical cables processes as desired. Motor current signatures, obtained in both time and over time to provide early indication of degradation. Successful applications of MCSA technology (patent applied for) include not only motor-operated valves but also pumps of various designs, blowers, and air conditioning systems. Examples are presented briefly, and speculation regarding the applicability of MCSA to a broader range of equipment monitoring and production line testing is also given. 1 ref., 13 figs

  2. Investment and uncertainty in machinery and real estate

    Directory of Open Access Journals (Sweden)

    Rodrigo Mendes Pereira

    2008-09-01

    Full Text Available Investment is usually treated as an homogeneous variable in the literature. The wide differences in the nature of inputs used in investment projects may lead to interesting insights that are not captured in the conventional approach. In this paper I decompose investment in machinery and industrial real estate and examine the impact of economic uncertainty on each of these components. Using panel data estimation methods for the Brazilian industry, I found that uncertainty exerts a harmful effect on both types of investment. However, the effect is much more intense with machines, which possibly is a consequence of their high reversibility costs.O investimento é geralmente tratado como uma variável homogênea na literatura. As grandes diferenças na natureza dos insumos empregados em projetos de investimento levam a idéias interessantes que não são capturadas pela abordagem tradicional. Nesse artigo eu decomponho o investimento em máquinas e imóveis e examino o impacto da incerteza econômica sobre cada um desses componentes. Utilizando métodos de estimação com dados em painel para a indústria brasileira, encontramos evidências de que a incerteza reduz ambos os tipos de investimento. Entretanto, o efeito parece ser mais intenso com máquinas, o que poderia ser uma conseqüência de um custo de reversibilidade mais alto.

  3. Localization of Axonal Motor Molecules Machinery in Neurodegenerative Disorders

    Directory of Open Access Journals (Sweden)

    Fulvio Florenzano

    2012-04-01

    Full Text Available Axonal transport and neuronal survival depend critically on active transport and axon integrity both for supplying materials and communication to different domains of the cell body. All these actions are executed through cytoskeleton, transport and regulatory elements that appear to be disrupted in neurodegenerative diseases. Motor-driven transport both supplies and clears distal cellular portions with proteins and organelles. This transport is especially relevant in projection and motor neurons, which have long axons to reach the farthest nerve endings. Thus, any disturbance of axonal transport may have severe consequences for neuronal function and survival. A growing body of literature indicates the presence of alterations to the motor molecules machinery, not only in expression levels and phosphorylation, but also in their subcellular distribution within populations of neurons, which are selectively affected in the course of neurodegenerative diseases. The implications of this altered subcellular localization and how this affects axon survival and neuronal death still remain poorly understood, although several hypotheses have been suggested. Furthermore, cytoskeleton and transport element localization can be selectively disrupted in some disorders suggesting that specific loss of the axonal functionality could be a primary hallmark of the disorder. This can lead to axon degeneration and neuronal death either directly, through the functional absence of essential axonal proteins, or indirectly, through failures in communication among different cellular domains. This review compares the localization of cytoskeleton and transport elements in some neurodegenerative disorders to ask what aspects may be essential for axon survival and neuronal death.

  4. Vibration monitoring of EDF rotating machinery using artificial neural networks

    International Nuclear Information System (INIS)

    Vibration monitoring of components in nuclear power plants has been used for a number of years. This technique involves the analysis of vibration data coming from vital components of the plant to detect features which reflect the operational state of machinery. The analysis leads to the identification of potential failures and their causes, and makes it possible to perform efficient preventive maintenance. Earlydetection is important because it can decrease the probability of catastrophic failures, reduce forced outgage, maximize utilization of available assets, increase the life of the plant, and reduce maintenance costs. This paper documents our work on the design of a vibration monitoring methodology based on neural network technology. This technology provides an attractive complement to traditional vibration analysis because of the potential of neural networks to operate in real-time mode and to handle data which may be distorted or noisy. Our efforts have been concentrated on the analysis and classification of vibration signatures collected by Electricite de France (EDF). Two neural networks algorithms were used in our project: the Recirculation algorithm and the Backpropagation algorithm. Although this project is in the early stages of development it indicates that neural networks may provide a viable methodology for monitoring and diagnostics of vibrating components. Our results are very encouraging

  5. Hormonal control of the metabolic machinery of hepatocellular carcinoma.

    Science.gov (United States)

    Wong, Carmen Chak-Lui; Wong, Chun-Ming; Ng, Irene Oi-Lin

    2016-06-01

    Hepatocellular carcinoma (HCC) is one of the most fatal malignancies worldwide. It is an aggressive cancer with low cure rate, frequent metastasis, and highly resistant to conventional chemotherapies. Better knowledge regarding the molecular and metabolic alterations in HCC will be instrumental to the development of novel therapeutic interventions against HCC. In the August 2015 issue of Hepatology, Nie et al. reports an important molecular pathway that contributes to the Warburg Effect in HCC. They have beautifully demonstrated that the loss of a component of a hormonal system, the mineralocorticoid receptor (MR), reprogrammed the metabolic machinery of HCC cells to aerobic glycolysis through the miR-338-3p-PKL/R axis. The implication could be that in addition to drugs that directly target the metabolic enzymes in cancer cells, more translational efforts could be focused on the development of drugs that involve the activation of the MR-aldosterone system or other hormonal systems to target the Warburg effect. PMID:27275458

  6. Structure, Function and Regulation of the Hsp90 Machinery

    Directory of Open Access Journals (Sweden)

    Jing Li

    2013-06-01

    Full Text Available Heat shock protein 90 (Hsp90 is an ATP-dependent molecular chaperone which is essential in eukaryotes. It is required for the activation and stabilization of a wide variety of client proteins and many of them are involved in important cellular pathways. Since Hsp90 affects numerous physiological processes such as signal transduction, intracellular transport, and protein degradation, it became an interesting target for cancer therapy. Structurally, Hsp90 is a flexible dimeric protein composed of three different domains which adopt structurally distinct conformations. ATP binding triggers directionality in these conformational changes and leads to a more compact state. To achieve its function, Hsp90 works together with a large group of cofactors, termed co-chaperones. Co-chaperones form defined binary or ternary complexes with Hsp90, which facilitate the maturation of client proteins. In addition, posttranslational modifications of Hsp90, such as phosphorylation and acetylation, provide another level of regulation. They influence the conformational cycle, co-chaperone interaction, and inter-domain communications. In this review, we discuss the recent progress made in understanding the Hsp90 machinery.

  7. Optimization of Hydraulic Machinery Bladings by Multilevel CFD Techniques

    Directory of Open Access Journals (Sweden)

    Thum Susanne

    2005-01-01

    Full Text Available The numerical design optimization for complex hydraulic machinery bladings requires a high number of design parameters and the use of a precise CFD solver yielding high computational costs. To reduce the CPU time needed, a multilevel CFD method has been developed. First of all, the 3D blade geometry is parametrized by means of a geometric design tool to reduce the number of design parameters. To keep geometric accuracy, a special B-spline modification technique has been developed. On the first optimization level, a quasi-3D Euler code (EQ3D is applied. To guarantee a sufficiently accurate result, the code is calibrated by a Navier-Stokes recalculation of the initial design and can be recalibrated after a number of optimization steps by another Navier-Stokes computation. After having got a convergent solution, the optimization process is repeated on the second level using a full 3D Euler code yielding a more accurate flow prediction. Finally, a 3D Navier-Stokes code is applied on the third level to search for the optimum optimorum by means of a fine-tuning of the geometrical parameters. To show the potential of the developed optimization system, the runner blading of a water turbine having a specific speed n q = 41 1 / min was optimized applying the multilevel approach.

  8. The relationship between agricultural technology and energy demand in Pakistan

    International Nuclear Information System (INIS)

    The purpose of this study was two fold: (i) to investigate the casual relationship between energy consumption and agricultural technology factors, and (ii) electricity consumption and technological factors in the agricultural sector of Pakistan. The study further evaluates four alternative but equally plausible hypotheses, each with different policy implications. These are: (i) Agricultural technology factors cause energy demand (the conventional view), (ii) energy demand causes technological factors, (iii) There is a bi-directional causality between the two variables and (iv) Both variables are causality independent. By applying techniques of Cointegration and Granger causality tests on energy demand (i.e., total primary energy consumption and electricity consumption) and agricultural technology factors (such as, tractors, fertilizers, cereals production, agriculture irrigated land, high technology exports, livestock; agriculture value added; industry value added and subsides) over a period of 1975–2010. The results infer that tractor and energy demand has bi-directional relationship; while irrigated agricultural land; share of agriculture and industry value added and subsides have supported the conventional view i.e., agricultural technology cause energy consumption in Pakistan. On the other hand, neither fertilizer consumption and high technology exports nor energy demand affect each others. Government should form a policy of incentive-based supports which might be a good policy for increasing the use of energy level in agriculture. - Highlights: ► Find the direction between green technology factors and energy demand in Pakistan. ► The results indicate that there is a strong relationship between them. ► Agriculture machinery and energy demand has bi-directional relationship. ► Green technology causes energy consumption i.e., unidirectional relationship. ► Agriculture expansion is positive related to total primary energy consumption.

  9. 46 CFR 61.20-3 - Main and auxiliary machinery and associated equipment, including fluid control systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main and auxiliary machinery and associated equipment... SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND INSPECTIONS Periodic Tests of Machinery and Equipment § 61.20-3 Main and auxiliary machinery and associated equipment, including fluid control...

  10. 46 CFR 167.65-70 - Reports of accidents, repairs, and unsafe boilers and machinery by engineers.

    Science.gov (United States)

    2010-10-01

    ... machinery by engineers. 167.65-70 Section 167.65-70 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... of accidents, repairs, and unsafe boilers and machinery by engineers. (a) Before making repairs to a... shall be the duty of all engineers when an accident occurs to the boilers or machinery in their...

  11. 46 CFR 32.56-25 - Category A machinery spaces: Windows and port lights-T/ALL.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Category A machinery spaces: Windows and port lights-T... SPECIAL EQUIPMENT, MACHINERY, AND HULL REQUIREMENTS Structural Fire Protection for Tank Ships With a Keel Laying Date On or After January 1, 1975 § 32.56-25 Category A machinery spaces: Windows and port...

  12. Handbook of Agricultural Geophysics

    Science.gov (United States)

    Geophysical methods continue to show great promise for use in agriculture. The term “agricultural geophysics” denotes a subdiscipline of geophysics that is focused only on agricultural applications. The Handbook of Agricultural Geophysics was compiled to include a comprehensive overview of the geoph...

  13. Sustainable agriculture - selected papers

    OpenAIRE

    Krasowicz, Stanisław; Wrzaszcz, Wioletta; Zegar, Jozef St.

    2007-01-01

    The concept of research on socially sustainable agriculture. Features of sustainable agriculture. Sustainability of private farms in the light of selected criteria. Subsistence agricultural holdings and the sustainable development of agriculture. Sustainable farms in the light of the FADN data. Description of organic holdings in Poland.

  14. Transforming Vietnamese Agriculture

    OpenAIRE

    World Bank Group

    2016-01-01

    Over the past quarter century, Vietnam’s agricultural sector has made enormous progress. Vietnam’s performance in terms of agricultural yields, output, and exports, however, has been more impressive than its gains in efficiency, farmer welfare, and product quality. Vietnamese agriculture now sits at a turning point. The agricultural sector now faces growing domestic competition - from cities, ...

  15. Origins of the machinery of recombination and sex.

    Science.gov (United States)

    Cavalier-Smith, T

    2002-02-01

    Mutation plays the primary role in evolution that Weismann mistakenly attributed to sex. Homologous recombination, as in sex, is important for population genetics--shuffling of minor variants, but relatively insignificant for large-scale evolution. Major evolutionary innovations depend much more on illegitimate recombination, which makes novel genes by gene duplication and by gene chimaerisation--essentially mutational forces. The machinery of recombination and sex evolved in two distinct bouts of quantum evolution separated by nearly 3 Gy of stasis; I discuss their nature and causes. The dominant selective force in the evolution of recombination and sex has been selection for replicational fidelity and viability; without the recombination machinery, accurate reproduction, stasis, resistance to radical deleterious evolutionary change and preservation of evolutionary innovations would be impossible. Recombination proteins betray in their phylogeny and domain structure a key role for gene duplication and chimaerisation in their own origin. They arose about 3.8 Gy ago to enable faithful replication and segregation of the first circular DNA genomes in precellular ancestors of Gram-negative eubacteria. Then they were recruited and modified by selfish genetic parasites (viruses; transposons) to help them spread from host to host. Bacteria differ fundamentally from eukaryotes in that gene transfer between cells, whether incidental to their absorptive feeding on DNA and virus infection or directly by plasmids, involves only genomic fragments. This was radically changed by the neomuran revolution about 850 million years ago when a posibacterium evolved into the thermophilic cenancestor of eukaryotes and archaebacteria (jointly called neomurans), radically modifying or substituting its DNA-handling enzymes (those responsible for transcription as well as for replication, repair and recombination) as a coadaptive consequence of the origin of core histones to stabilise its

  16. Modeling integrated cellular machinery using hybrid Petri-Boolean networks.

    Directory of Open Access Journals (Sweden)

    Natalie Berestovsky

    Full Text Available The behavior and phenotypic changes of cells are governed by a cellular circuitry that represents a set of biochemical reactions. Based on biological functions, this circuitry is divided into three types of networks, each encoding for a major biological process: signal transduction, transcription regulation, and metabolism. This division has generally enabled taming computational complexity dealing with the entire system, allowed for using modeling techniques that are specific to each of the components, and achieved separation of the different time scales at which reactions in each of the three networks occur. Nonetheless, with this division comes loss of information and power needed to elucidate certain cellular phenomena. Within the cell, these three types of networks work in tandem, and each produces signals and/or substances that are used by the others to process information and operate normally. Therefore, computational techniques for modeling integrated cellular machinery are needed. In this work, we propose an integrated hybrid model (IHM that combines Petri nets and Boolean networks to model integrated cellular networks. Coupled with a stochastic simulation mechanism, the model simulates the dynamics of the integrated network, and can be perturbed to generate testable hypotheses. Our model is qualitative and is mostly built upon knowledge from the literature and requires fine-tuning of very few parameters. We validated our model on two systems: the transcriptional regulation of glucose metabolism in human cells, and cellular osmoregulation in S. cerevisiae. The model produced results that are in very good agreement with experimental data, and produces valid hypotheses. The abstract nature of our model and the ease of its construction makes it a very good candidate for modeling integrated networks from qualitative data. The results it produces can guide the practitioner to zoom into components and interconnections and investigate them

  17. Liquid metal current collectors for high-speed rotating machinery

    International Nuclear Information System (INIS)

    Recent interest in superconducting motors and generators has created a renewed interest in homopolar machinery. Homopolar machine designs have always been limited by the need for compact, high-current, low-voltage, sliding electrical curent collectors. Conventional graphite-based solid brushes are inadequate for use in homopolar machines. Liquid metals, under certain conditions of relative sliding velocities, electrical currents, and magnetic fields are known to be capable of performing well in homopolar machines. An effort to explore the capabilities and limits of a tongue-and-groove style current collector, utilizing sodium-potassium eutectic alloy (NaK) as the working fluid in high sliding speed operation is reported here. A double current collector generator model with a 14.5-cm maximum rotor diameter, 20,000 rpm rotational capability, and electrical current carrying ability was constructed and operated successfully at a peripheral velocity of 125 m/s. The limiting factor in these experiments was a high-speed fluid-flow instability resulting in the ejection of the working fluid from the operating portions of the collectors. The effects of collector size and geometry, working fluid (NaK or water), and cover gas pressure are reported. Hydrodynamic frictional torque-speed curves are given for the two fluids and for several geometries. Electrical resistances as a function of peripheral velocity at 60 amperes are reported, and the phenomenology of the high-speed fluid-flow instabilities is discussed. The possibility of long-term high-speed operation of current collectors of the tongue-and-groove type, along with experimental and theoretical hydrodynamic friction losses at high peripheral velocities, is considered

  18. Dolichol: A Component of the Cellular Antioxidant Machinery.

    Science.gov (United States)

    Cavallini, Gabriella; Sgarbossa, Antonella; Parentini, Ilaria; Bizzarri, Ranieri; Donati, Alessio; Lenci, Francesco; Bergamini, Ettore

    2016-04-01

    Dolichol, an end product of the mevalonate pathway, has been proposed as a biomarker of aging, but its biological role, not to mention its catabolism, has not been fully understood. UV-B radiation was used to induce oxidative stress in isolated rat hepatocytes by the collagenase method. Effects on dolichol, phospholipid-bound polyunsaturated fatty acids (PL-PUFA) and known lipid soluble antioxidants [coenzyme Q (CoQ) and α-tocopherol] were studied. The increase in oxidative stress was detected by a probe sensitive to reactive oxygen species (ROS). Peroxidation of lipids was assessed by measuring the release of thiobarbituric acid reactive substances (TBARS). Dolichol, CoQ, and α-tocopherol were assessed by high-pressure liquid chromatography (HPLC), PL-PUFA by gas-liquid chromatography (GC). UV-B radiation caused an immediate increase in ROS as well as lipid peroxidation and a simultaneous decrease in the levels of dolichol and lipid soluble antioxidants. Decrease in dolichol paralleled changes in CoQ levels and was smaller to that in α-tocopherol. The addition of mevinolin, a competitive inhibitor of the enzyme 3-hydroxy-3-methylglutaryl CoA reductase (HMG-CoAR), magnified the loss of dolichol and was associated with an increase in TBARS production. Changes in PL-PUFA were minor. These findings highlight that oxidative stress has very early and similar effects on dolichol and lipid soluble antioxidants. Lower levels of dolichol are associated with enhanced peroxidation of lipids, which suggest that dolichol may have a protective role in the antioxidant machinery of cell membranes and perhaps be a key to understanding some adverse effects of statin therapy. PMID:26968401

  19. An oxygen-regulated switch in the protein synthesis machinery

    Science.gov (United States)

    Uniacke, James; Holterman, Chet E.; Lachance, Gabriel; Franovic, Aleksandra; Jacob, Mathieu D.; Fabian, Marc R.; Payette, Josianne; Holcik, Martin; Pause, Arnim; Lee, Stephen

    2016-01-01

    SUMMARY Protein synthesis involves the translation of ribonucleic acid information into proteins, the building blocks of life. The initial step of protein synthesis consists of the eukaryotic translation initiation factor 4E (eIF4E) binding to the 7-methylguanosine (m7-GpppG) 5′cap of mRNAs1,2. Low oxygen tension (hypoxia) represses cap-mediated translation by sequestering eIF4E through mammalian target of rapamycin (mTOR)-dependent mechanisms3–6. While the internal ribosome entry site is an alternative translation initiation mechanism, this pathway alone cannot account for the translational capacity of hypoxic cells7,8. This raises a fundamental question in biology as to how proteins are synthesized in periods of oxygen scarcity and eIF4E inhibition9. Here, we uncover an oxygen-regulated translation initiation complex that mediates selective cap-dependent protein synthesis. Hypoxia stimulates the formation of a complex that includes the oxygen-regulated hypoxia-inducible factor 2α (HIF-2α), the RNA binding protein RBM4 and the cap-binding eIF4E2, an eIF4E homologue. PAR-CLIP10 analysis identified an RNA hypoxia response element (rHRE) that recruits this complex to a wide array mRNAs, including the epidermal growth factor receptor (EGFR). Once assembled at the rHRE, HIF-2α/RBM4/eIF4E2 captures the 5′cap and targets mRNAs to polysomes for active translation thereby evading hypoxia-induced repression of protein synthesis. These findings demonstrate that cells have evolved a program whereby oxygen tension switches the basic translation initiation machinery. PMID:22678294

  20. Radiation survey of aircraft and heavy machinery scrap

    International Nuclear Information System (INIS)

    This study was conducted primarily to survey aircraft and heavy machinery at 30 locations within Khartoum State using handheld radiation survey meters to detect and identify any radiation sources that might be present and to estimate radiation dose levels. The survey has resulted in detection of 16 sealed sources of 90Sr and one of 226Ra in aircraft scrap. Of course, 90Sr sources are used in military aircraft as temperature sensors while 226Ra is used for indicating fuel levels. These sources were found intact without spreading radioactivity contamination; however, none was detected in heavy machine scrap. The levels of radiation dose measured at 0.1 m from the source fall within the range of 25.1–40.2 μSv/h with an average value of 33.52±4.06 μSv/h. These orphan sources have been separated from the scrap, tested for possible leakage, conditioned and stored in waste management facility. The result of this study has revealed without doubt that the scrap constitute a serious source of public exposure and highlights the importance of legislation making radiation monitoring of scrap in the country mandatory before it is sold to metal industry for reprocessing. - Highlights: ► Sealed radioactive sources (90Sr and 226Ra) were detected in aircraft scrap. ► No source was detected in heavy machine scrap. ► Radiation dose measured at 0.1 m from the source can be used to estimate exposure to public. Monitoring of scrap was found to be useful for protection (from orphan sources).

  1. Optimization of hydraulic machinery by exploiting previous successful designs

    International Nuclear Information System (INIS)

    A design-optimization method for hydraulic machinery is proposed. Optimal designs are obtained using the appropriate CFD evaluation software driven by an evolutionary algorithm which is also assisted by artificial neural networks used as surrogate evaluation models or metamodels. As shown in a previous IAHR paper by the same authors, such an optimization method substantially reduces the CPU cost, since the metamodels can discard numerous non-promising candidate solutions generated during the evolution, at almost negligible CPU cost, without evaluating them by means of the costly CFD tool. The present paper extends the optimization method of the previous paper by making it capable to accommodate and exploit pieces of useful information archived during previous relevant successful designs. So, instead of parameterizing the geometry of the hydraulic machine components, which inevitably leads to many design variables, enough to slow down the design procedure, in the proposed method all new designs are expressed as weighted combinations of the archived ones. The archived designs act as the design space bases. The role of the optimization algorithms is to find the set (or sets, for more than one objectives, where the Pareto front of non-dominated solutions is sought) of weight values, corresponding to the hydraulic machine configuration(s) with optimal performance. Since the number of weights is much less that the number of design variables of the conventional shape parameterization, the design space dimension reduces and the CPU cost of the metamodel-assisted evolutionary algorithm is much lower. The design of a Francis runner is used to demonstrate the capabilities of the proposed method.

  2. The Analysis of the Age Structure of Regional Fixed Capital in the Agriculture

    Directory of Open Access Journals (Sweden)

    P. Mazouch

    2016-06-01

    Full Text Available The paper deals with an estimate and analysis of the value of regional net fixed capital stock and the age structure of machinery and equipment in Czech agriculture. In order to perform such analysis, the official model of perpetual inventory method is transformed into the Markov chain model and applied on regional data separately. Regional net fixed capital stock is presented for the period of 2008-2013. The development of the average age of machinery and equipment comprises a potential indicator of the modernisation process in the industry. The analysis of the age structure is based on the structure heterogeneity indicator. For these purposes, the real age structure in each Czech region is compared with the theoretical stable and stationary structure. Currently, the most heterogeneous age structure of machinery and equipment occurs in Prague and the Karlovy Vary region.

  3. Comparative Analysis of the Utilization Efficiency of Major Agricultural Resources in Hebei Province

    Institute of Scientific and Technical Information of China (English)

    Yajuan; TIAN; Li; ZHEN

    2014-01-01

    The utilization efficiency of resources is one of the important factors affecting the development of modern agriculture. Using production function method and ratio analysis method,we carry out the horizontal comparison of the utilization efficiency of major agricultural resources such as arable land,agricultural machinery power and chemical fertilizer in Hebei Province and the national level,and the vertical comparison of the utilization efficiency of major agricultural resources between the prefecture-level cities in the province. The results show that the utilization efficiency of agricultural resources in Hebei Province is below the national average,and there are significant differences in the utilization efficiency of agricultural resources between the prefecture-level cities in the province.

  4. The Main Content,Technical Support and Enforcement Strategy of Digital Agriculture

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper deals with the content,purpose and significance of digital agriculture,and gives a brief introduction to digital earth,digital China and digital agriculture abroad.The main content of digital agriculture includes the construction of database,Metadata standard,monitoring system,forecasting and decision-making system,information-releasing system.The main technical supports of digital agriculture are 3S technology,Metadata management technology,fast-handling technology of remote sensing,the technology of computer wide-band network and virtual reality,intelligent agriculture machinery and field real-time information collecting technology.The advantages of implementing digital agriculture in China and the problems worthy of attention are pointed out as well.

  5. Xin Gang Textile Machinery to Show Up at ITMA Asia + CITME 2012

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Fujian Xin Gang Textile Machinery Co., Ltd., located in Industrial District of Changle City Fujian Province, occupying 32 acres, is aprofessional warp knitting machine manufacturer, which is capable of researching, producing, processing, assembling, selling and after-sale servicing.

  6. Genome-scale modeling of the protein secretory machinery in yeast

    DEFF Research Database (Denmark)

    Feizi, Amir; Österlund, Tobias; Petranovic, Dina;

    2013-01-01

    The protein secretory machinery in Eukarya is involved in post-translational modification (PTMs) and sorting of the secretory and many transmembrane proteins. While the secretory machinery has been well-studied using classic reductionist approaches, a holistic view of its complex nature is lacking....... Here, we present the first genome-scale model for the yeast secretory machinery which captures the knowledge generated through more than 50 years of research. The model is based on the concept of a Protein Specific Information Matrix (PSIM: characterized by seven PTMs features). An algorithm...... was developed which mimics secretory machinery and assigns each secretory protein to a particular secretory class that determines the set of PTMs and transport steps specific to each protein. Protein abundances were integrated with the model in order to gain system level estimation of the metabolic demands...

  7. Reconstitution of Biosynthetic Machinery for the Synthesis of the Highly Elaborated Indole Diterpene Penitrem

    DEFF Research Database (Denmark)

    Liu, Chengwei; Tagami, Koichi; Minami, Atsushi;

    2015-01-01

    KULNJ). Importantly, without conventional gene disruption, reconstitution of the biosynthetic machinery provided sufficient data to determine the pathway. It was thus demonstrated that the Aspergillus oryzae reconstitution system is a powerful method for studying the biosynthesis of complex natural products....

  8. Factors Influencing Farmers’ Willingness to Participate in Plant Protection Machinery Subsidies

    Institute of Scientific and Technical Information of China (English)

    Linping; WANG; Liangmei; CAI

    2013-01-01

    In order to have an overview of implementation of the subsidy policy for purchase of plant protection machinery in Fujian Province, based on the questionnaire data on Fujian Province, we use Logit model to conduct empirical analysis of factors influencing farmers’ willingness to participate in the subsidy policy for purchase of plant protection machinery. Research results show that there are 69.4% of farmers willing to participate in the subsidy policy for purchase of plant protection machinery; farmers’ growing area has a significant impact on the willingness to participate in the subsidy policy for purchase of plant protection machinery, and there is negative correlation; educational level, experience in planting, family farming pure income all have a significant positive impact on the willingness to participate in the subsidy policy.

  9. 2006 China Machinery and Electronical Products Trade Fair:Ample Fruits Shown

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ 2006 Malaysia China Machinery and Electronical Products Trade Fair, organized by China Council for the Promotion of International Trade(CCPIT), was held in August in Prince World Trade Center(PWTC), Kuala Lumpur.

  10. Application of Choi—Williams Reduced Interference Time Frequency Distribution to Machinery Diagnostics

    Directory of Open Access Journals (Sweden)

    Howard A. Gaberson

    1995-01-01

    Full Text Available This article discusses time frequency analysis of machinery diagnostic vibration signals. The short time Fourier transform, the Wigner, and the Choi–Williams distributions are explained and illustrated with test cases. Examples of Choi—Williams analyses of machinery vibration signals are presented. The analyses detect discontinuities in the signals and their timing, amplitude and frequency modulation, and the presence of different components in a vibration signal.

  11. Integration of business and manufacturing processes through industrial machinery as a service approach

    OpenAIRE

    Gilart Iglesias, Virgilio; Maciá Pérez, Francisco; Marcos Jorquera, Diego; Mora Gimeno, Francisco José; Gil Martínez-Abarca, Juan Antonio

    2011-01-01

    In manufacturing organizations is difficult to reach the requirements of the new business models (agile and dynamic adaptation to changes) due to technological and conceptual constraints between elements located at different levels of the organization, which prevents the integration of business and manufacturing processes. In this paper, a new industrial machinery model that achieves this integration has been proposed. This model, named IMaaS, shows the industrial machinery as a set of busine...

  12. ZF cPower – Hydrostatic-Mechanical Powersplit Transmission for Construction and Forest Machinery

    OpenAIRE

    Legner, Jürgen; Rebholz, Wolfgang; Morrison, Robert

    2016-01-01

    Until recently, hydrostatic-mechanical power split CVT drivelines have not found a place in construction machinery. The majority of these vehicles still use hydrodynamic powershift transmissions, full-hydrostatic transmissions or mechanical direct-shift transmissions. Hydrostatic drive lines are widely used in construction machinery possessing lower engine power. The upper power range is dominated by hydrodynamic powershift transmissions. Decisions made by vehicle manufacturers about which dr...

  13. Apoptotic machinery diversity in Multiple Myeloma molecular subtypes.

    Directory of Open Access Journals (Sweden)

    Patricia eGomez-Bougie

    2013-12-01

    Full Text Available Multiple myeloma (MM is a plasma cell malignancy that is heterogeneous in its clinical presentation and prognosis. Monoclonal gammopathy of undetermined significance (MGUS consistently preceded development of MM. The presence of primary IgH translocations and the universal over-expression of cyclin D genes led to a molecular classification of MM patients into different disease subtypes. Since Bcl-2 family proteins determine cell fate, we analyzed a publicly available Affymetrix gene expression of 44 MGUS and 414 newly diagnosed MM patients to investigate (1 the global change of Bcl-2 family members in MM versus MGUS (2 whether the four major subtypes defined as hyperdiploid, CCND1, MAF and MMSET, display specific apoptotic machineries.We showed that among the main anti-apoptotic members (Bcl-2, Bcl-xL and Mcl-1, Mcl-1 up-regulation discriminated MM from MGUS, in agreement with the prominent role of Mcl-1 in plasma cell differentiation. Surprisingly, the expression of multi-domain pro-apoptotic Bak and Bax were increased during the progression of MGUS to MM. The combined profile of Bcl-2, Bcl-xL and Mcl-1 was sufficient to distinguish MM molecular groups. While specific pro-apoptotic members expression was observed for each MM subtypes, CCDN1 subgroup, was identified as a particular entity characterized by a low expression of both BH3-only (Puma, Bik and Bad and multi-domain pro-apoptotic members (Bax and Bak. Our analysis supports the notion that MM heterogeneity is extended to the differential expression of the Bcl-2 family content in each MM subgroup. The influence of Bcl-2 family profile in the survival of the different patient groups will be further discussed to establish the potential consequences for therapeutic interventions. Finally, the use of distinct pro-survival members in the different steps of immune responses to antigen rise also the question of whether the different Bcl-2 anti-apoptotic profile could reflect a different origin of

  14. Regional diversity of agricultural labor productivity and its driving force in east China

    Institute of Scientific and Technical Information of China (English)

    Liu Ziqiang; Li Jing; Lu Qi

    2009-01-01

    China's eastern area is at middle and later stage of industrialization during which the relation between ur ban and rural areas,industry and agriculture appears maladjusted The main problems are shrinkage in agricultural somparative earning and lack of driving force of agricultural development.Based on calculating agricultural labor productivity in east China from 1996 to 2005,this paper analyzes contributing degree of motive forces of agriculture develop in ten provinces and cities of east China applying GCA (Grey correlative analysis).The results show that there is no absolute correspondence between the level of industrialization and agricultural labor productivity in Chi,na's cotstern area.There is no synchronous development between industry and agricultural labor productivity in some areas.Fertilizer and agricultural machinery input had high contributing degree for ten years; however,contributing degree in land and irrigation work input was low.Non-materialization inputs became the leading role in most provinc,es and cities' increase of agricultural labor productivity.Modern agricultural development need non-materializationinputs as primary motive.force,at the same time,direct material input and facility input as guaranteed function.Forsome reasons,agricultural development is characterized by "more direct material input,less facility input" in east China now.Optimal driving force model of future agricultural development in east China is that non-materializatior inputs are dominant that perfected facilitv input are guarantee,and that certain substance inputs are necessary.

  15. Innovations in urban agriculture

    NARCIS (Netherlands)

    Schans, van der J.W.; Renting, Henk; Veenhuizen, Van René

    2014-01-01

    This issuehighlights innovations in urban agriculture. Innovation and the various forms of innovations are of particular importance because urban agriculture is adapted to specific urban challenges and opportunities. Innovation is taking place continuously, exploring the multiple fundions of urban a

  16. Agricultural policy schemes

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    Agricultural support is a very important element in agricultural policy in many countries. Agricultural support is basically an instrument to meet the overall objectives of the agricultural policy – objectives set by society. There are a great number of instruments and ways of intervention in...... agricultural policy and they have different functions and impacts. Market price support and deficiency payments are two very important instruments in agricultural policy; however, they belong to two different support regimes or support systems. Market price support operates in the so-called high price system...... given by means of direct support, while market prices are left undistorted at, or close to, world market level. The two different support systems have very different implications for agricultural production, financing, markets, and other aspects; still, there is an income transfer to agriculture in both...

  17. Agricultural science policy

    OpenAIRE

    Alston, Julian M.; Pardey, Philip G.; Taylor, Michael J.

    2001-01-01

    Technological advances developed through R&D have supplied the world with not only more food, but better food. This report looks at issues raised by this changing environment for agricultural productivity, agricultural R&D, and natural resource management.

  18. Traditional Agriculture and Permaculture.

    Science.gov (United States)

    Pierce, Dick

    1997-01-01

    Discusses benefits of combining traditional agricultural techniques with the concepts of "permaculture," a framework for revitalizing traditions, culture, and spirituality. Describes school, college, and community projects that have assisted American Indian communities in revitalizing sustainable agricultural practices that incorporate cultural…

  19. Machine vision in agriculture

    OpenAIRE

    Gouws, J.

    1996-01-01

    This paper provides an overview of the use of machine vision in agriculture. Agriculture is practised in a more natural environment than most industrial undertakings, implying that agricultural automation requires robotic systems with well developed sensory abili­ties. For such systems, machine vision is an essential component. In this paper examples are used to show that the use of machine vision is already widespread in agriculture, and that there are many more potential applications for t...

  20. BOOK REVIEWS - Precision agriculture

    OpenAIRE

    Stanisław Samborski; Dariusz Gozdowski

    2007-01-01

    Precision agriculture (PA) is a term, which has recently become very popular in agronomy. In short this term means crop production based on site-specific crop management (SSCM). Precision agriculture is an integrated agricultural management system incorporating different science disciplines e.g. crop science, agricultural engineering and geostatistics. It also uses numerous tools i.e., geographic information system (GIS), Global Positioning System (GPS), remote sensing yield monitors. Because...

  1. Industralization of Animal Agriculture

    OpenAIRE

    Oya S. Erdogdu; David Hennessy

    2003-01-01

    The economic concerns and the technological developments increased control over nature and nurture in the animal agriculture. That changed the seasonality pattern of the supply side and lead to structural change in the animal agriculture together with the demand side factors. In this study we focused on the supply side factors and document the ‘industralization’ of the animal agricultural production.

  2. Cambodian Agriculture in Transition

    OpenAIRE

    World Bank Group

    2015-01-01

    This report seeks to understand the successes, challenges and opportunities of Cambodia’s agricultural transformation over the past decade to derive lessons and insights on how to maintain future agricultural growth, and particularly on the government’s role in facilitating it. It is prepared per the request of the Supreme National Economic Council and the Ministry of Agriculture Forestry ...

  3. A Consideration of Agriculture and Agricultural Science

    Institute of Scientific and Technical Information of China (English)

    Liu Gengling

    2006-01-01

    The article explores the importance of agricultulture in line with development of society. It uses examples of high productivity achieved in grain and cotton crops in lnner Mongolia and Xinjiang areas to show that the fundamental objective of agricultural science is to maximize crops through the most effective use of soil, fertilizer and water in gaining the greatest benefit from power of the sun. Agricultural science should take up relevant theories and methodologies from other sciences, such as biological science, earth science and economics. The use of information technology will have great benefits for agricultural science. It hopes the scientific communities of China can make a significant contribution to solving the problems facing our rural areas, farmers and agriculture itself.

  4. ORGANIZATIONAL AND ECONOMIC BASES OF ENERGY CONSERVATION IN AGRICULTURE

    Directory of Open Access Journals (Sweden)

    N. Lisjutchenko

    2012-04-01

    Full Text Available Russian agricultural production at current stage is very energy intensive. At the cost of agricultural production overall cost of energy resources is growing: in 2000 was 36.5 billion rubles, 2008 - 92 billion rubles, 2009 - 110.6 billion rubles, and in 2010 rose to 119.8 billion rubles, or increased by 3.3 times. The analysis of consumption of the main energy sources for the period from 1990 to 2010 showed a decrease in general and the specific consumption of diesel fuel, gasoline and electricity by 5-7 times. Reducing energy consumption is explained as a forced saving resources because of lack of funds for the acquisition and implementation of agricultural enterprises of energy and resource saving measures (resource-saving technologies in the production process, motor fuel, biofuels and alternative energy sources. To solve this problem State and business in a matter of priority should be to build an effective system of innovation development for agriculture, promote the participation of agricultural science and education system in this process, modernize the domestic agricultural machinery, engineering and technology infrastructure.

  5. AGRICULTURAL POLICIES AND COMPETITION IN WORLD AGRICULTURE

    Directory of Open Access Journals (Sweden)

    Raluca Duma

    2011-04-01

    Full Text Available Agricultural policies have had a guiding role inagriculture development and implicitly in their marketing. Usually they belongto each state and government and are issued in accordance with their specificclimate, social-economic and cultural background which includes food andgastronomic traditions. Agricultural policies have in view home and foreignmarket demand, as well as the socio-demographic, political and military contextat a certain point in the socio-economic development

  6. Agricultural science and ethics

    DEFF Research Database (Denmark)

    Gjerris, Mickey; Vaarst, Mette

    2014-01-01

    , about 20 % of the world's coral reefs and 35 % of the mangrove areas were lost (Millennium Ecosystem Assessment 2005). In the following, the development of agricultural science will be sketched out and the role of ethics in agricultural science will be discussed. Then different views of nature that have...... shaped agriculture and the role of science in agriculture will be discussed by analyzing some of the presumptions behind the concept of ecosystem services and the way animals are viewed. Finally, the concepts of animal welfare and sustainability will be explored to show how they make vivid the connection...... between agricultural science and ethics....

  7. CORRELATION BETWEEN THE SHORT SEA SHIPPING CAPABILITY (POTENTIAL OF A PORT AND PORT MACHINERY FLEXIBILITY

    Directory of Open Access Journals (Sweden)

    Deda Đelović

    2015-09-01

    Full Text Available The promotion of environmentally friendly modes of transport, in particular Short Sea Shipping, and their effective integration in multimodal transport chains and networks is one from the group of central objectives of the European Union’s transport policy. According to results of different relevant researches available to the author, to the group of problems which still hamper Short Sea Shipping development belongs lack of flexibility in ports. Port machinery flexibility, in general, is one of the factors with decisive influence on port flexibility. After some general considerations of the Short Sea Shipping concept, parameters which enable measuring Short Sea Shipping capability (potential of a port, from the aspect of port machinery, are identified. Interdependences between port machinery flexibility and Short Sea Shipping capability (potential of a port (using the Port of Bar as an object of analysis are taken into detailed consideration in this paper, too. By the results of analyses presented in the paper is confirmed existence of correlation between the Short Sea Shipping capability (potential of a port and port machinery flexibility: to a higher level of the Short Sea Shipping capability (potential of a port corresponds a higher level of port machinery flexibility.

  8. Design and Realization of Rotating Machinery Conditions Monitoring System Based on Labview

    Science.gov (United States)

    Fan, Qiyuan

    Nonlinear dynamic analysis of rotating machinery system has always been the hot spot of the rotational dynamics research. This article sets up a rotating machinery condition monitoring system to realize the measurement of system dynamic characteristic parameters based on NI(National Instruments) virtual instruments technology. The measurement of vibration signal of rotating machinery system is achieved by using NI company general data acquisition module of NI company. Meanwhile, by analyzing and processing the acquired data using Labview 2012, the dynamic characteristics, such as .the speed of the rotating machinery system, the axis trajectory, spectrum parameters, are attained. The measurement results show that the rotating machinery condition monitoring system based on Labview is easy to operate, easy to realize the function extension and maintenance, and that it can be used in the industrial engineering projects with rotation characteristics. Labview as the development tools used by virtual instrument function, is very powerful data acquisition software products support is one of the features of it, so using Labview programming and data acquisition is simple and convenient [1].

  9. Production and characterization of pyrolytic oils by pyrolysis of waste machinery oil

    International Nuclear Information System (INIS)

    The main objective of this work is to propose an alternative method for evaluation of the waste machinery oil which is an environmental problem in Turkey. For this purpose, pyrolysis of waste machinery oil was conducted in a tubular reactor. Effect of the experimental conditions (various temperatures, catalyst type) on the formation of pyrolytic oil, gas, and char was investigated. Nickel supported on silica and zeolite (HZSM-5) were used as catalysts. Properties of the pyrolytic oils were characterized by gas chromatograph equipped with a mass selective detector (GC-MS), gas chromatography with flame ionization detector (GC-FID for boiling point range distribution), nuclear magnetic resonance (1H NMR) spectroscopy, higher heating value measurement, and elemental analysis. The behavior of the metals in the waste machinery oil and the pyrolytic oil samples was also quantitatively detected by inductively coupled plasma (ICP) analysis. As, Cd and Cr contents of the all pyrolytic oils were found as <0.05 ppm, while Cu content of the pyrolytic oils varied between 0.3 ppm and 0.61 ppm. Only Vanadium contents of the pyrolytic oils obtained at 800 deg. C (0.342 ppm) and in the presence of HZSM5 (0.57 ppm) increased compared to that obtained by waste machinery oil (0.1 ppm). Lower metal contents of the pyrolytic oils reveal that pyrolysis of the waste machinery oils leads to the formation of environmental friendly pyrolytic oils with higher heating values.

  10. Emergence and modular evolution of a novel motility machinery in bacteria.

    Directory of Open Access Journals (Sweden)

    Jennifer Luciano

    2011-09-01

    Full Text Available Bacteria glide across solid surfaces by mechanisms that have remained largely mysterious despite decades of research. In the deltaproteobacterium Myxococcus xanthus, this locomotion allows the formation stress-resistant fruiting bodies where sporulation takes place. However, despite the large number of genes identified as important for gliding, no specific machinery has been identified so far, hampering in-depth investigations. Based on the premise that components of the gliding machinery must have co-evolved and encode both envelope-spanning proteins and a molecular motor, we re-annotated known gliding motility genes and examined their taxonomic distribution, genomic localization, and phylogeny. We successfully delineated three functionally related genetic clusters, which we proved experimentally carry genes encoding the basal gliding machinery in M. xanthus, using genetic and localization techniques. For the first time, this study identifies structural gliding motility genes in the Myxobacteria and opens new perspectives to study the motility mechanism. Furthermore, phylogenomics provide insight into how this machinery emerged from an ancestral conserved core of genes of unknown function that evolved to gliding by the recruitment of functional modules in Myxococcales. Surprisingly, this motility machinery appears to be highly related to a sporulation system, underscoring unsuspected common mechanisms in these apparently distinct morphogenic phenomena.

  11. Reorganization of Agricultural Extension toward Green Agriculture

    Directory of Open Access Journals (Sweden)

    Mohammad S. Allahyari

    2009-01-01

    Full Text Available Problem statement: Considering unsustainable agricultural conditions of Iran and organizational recession and inability of current extension organization to achieve sustainability, it seems that extension systems require a new organizational structure to achieve sustainability objectives. The purpose of the present study was to identify the most appropriate characteristics for extension organization toward green agriculture in Iran context. Approach: To fulfill this objective, a sample of 120 respondents was selected through simple random sampling technique. A survey study was applied as a methodology of research. A mailed questionnaire was used to collect the data. The response rate of questionnaire was 65.83% (N = 79. Appropriate descriptive statistics such as mean scores, standard deviations and variation ratio were used. Results: Extension experts believed that among important organizational characteristics of extension system for supporting green agriculture collaboration among research, extension, education organizations, farmers' associations, NGOs, rural credit agencies, transportation companies, considering local groups and learning organization had very high importance for supporting green agriculture. According to factor analysis, the implications for extension organization were categorized into two groups consisting: (1 Holistic organizations (2 Participatory organizations that those factors explained 67.54% of the total variance of the research variables. Conclusion: Identifying suitable extension mechanisms had important role for developing extension system. Therefore, identifying extension organizational characteristics for supporting green agriculture of Iran is one of the major approaches needs to be carefully thought and accurately implemented for the extension system development.

  12. MODERNIZATION OF AGRICULTURE VS SUSTAINABLE AGRICULTURE

    Directory of Open Access Journals (Sweden)

    Dariusz KUSZ

    2014-04-01

    Full Text Available The paper shows the correlation between the need to modernise agriculture and sustainable development. Modernisation of agriculture aiming only at increasing the efficiency of production, if implemented in accordance with the principles of sustainable development, enabled reduction in the negative external effects. Modernisation of agriculture is supposed to ensure productivity growth without imposing any threats to the natural environment and the well-being of animals, reduced impoverishment in rural areas as well as to ensure food security, growth in the profitability of farms, improvement to the efficiency of use of natural resources. Therefore, in the near future, the agriculture – environment relation will be subject to change taking into account, on the one hand, concern about the natural environment, and, on the other, pressure on increasing the efficiency of production. The above challenges will be addressed by the need to implement efficient and, at the same time, environmentally-friendly production technologies and relevant legal instruments which oblige agricultural producers to protect the natural environment.

  13. Control of vibration and resonance in aero engines and rotating machinery - An overview

    International Nuclear Information System (INIS)

    This paper presents an overview of the vibration problems which are experienced in running gas turbines, and other high-speed machinery. The primary problem is that of resonance, where response levels under dynamic loading can be 100 or 1000 times greater than the levels resulting from static loading of the same magnitude. These resonances can be caused by steady, non-oscillatory, forces being applied to a rotating disc and their prediction and observation from measurement under running conditions are essential capabilities for the machinery dynamics engineer. Additional problems can arise if instabilities are encountered, either from aerodynamic sources (flutter) or from rotor dynamics. In all cases where severe vibrations are encountered, they must be controlled by the introduction of extra damping to the critical components, usually by incorporating friction devices. The use of visual displays to illuminate and help to understand the complexities of vibration in rotating machinery structures is presented.

  14. Undecimated Lifting Wavelet Packet Transform with Boundary Treatment for Machinery Incipient Fault Diagnosis

    Directory of Open Access Journals (Sweden)

    Lixiang Duan

    2016-01-01

    Full Text Available Effective signal processing in fault detection and diagnosis (FDD is an important measure to prevent failure and accidents of machinery. To address the end distortion and frequency aliasing issues in conventional lifting wavelet transform, a Volterra series assisted undecimated lifting wavelet packet transform (ULWPT is investigated for machinery incipient fault diagnosis. Undecimated lifting wavelet packet transform is firstly formulated to eliminate the frequency aliasing issue in traditional lifting wavelet packet transform. Next, Volterra series, as a boundary treatment method, is used to preprocess the signal to suppress the end distortion in undecimated lifting wavelet packet transform. Finally, the decomposed wavelet coefficients are trimmed to the original length as the signal of interest for machinery incipient fault detection. Experimental study on a reciprocating compressor is performed to demonstrate the effectiveness of the presented method. The results show that the presented method outperforms the conventional approach by dramatically enhancing the weak defect feature extraction for reciprocating compressor valve fault diagnosis.

  15. Machine vision in agriculture

    Directory of Open Access Journals (Sweden)

    J. Gouws

    1996-07-01

    Full Text Available This paper provides an overview of the use of machine vision in agriculture. Agriculture is practised in a more natural environment than most industrial undertakings, implying that agricultural automation requires robotic systems with well developed sensory abili­ties. For such systems, machine vision is an essential component. In this paper examples are used to show that the use of machine vision is already widespread in agriculture, and that there are many more potential applications for this technology. It is also indicated that machine vision in agriculture does not only hold potential financial advantages, but that it can also contribute to improved quality of life for agricultural workers, and even for farm animals.

  16. Textile Machinery Saw Greater Increases in Profits Year on Year——Economic Operation Overview of Textile Machinery Industry,First Half Year of 2011

    Institute of Scientific and Technical Information of China (English)

    Zhao Fei

    2011-01-01

    January to April in 2011,the textile machinery industry saw total profits of 1.861 billion yuan,increasing 45.19% year on year;the overall operating performance of the industry presents a stable development momentum with a decline in gross profits.From January to May of this year,the cumulative total import and export value amounts to 3.209 billion USD,rising 51.39% over the same period

  17. Agricultural Occupations Programs Planning Guides

    Science.gov (United States)

    Stitt, Thomas R.; And Others

    1977-01-01

    A set of program planning guides that include seven areas (1) Agricultural Production, (2) Agricultural Supplies and Services, (3) Agricultural Mechanics, (4) Agricultural Products, (5) Ornamental Horticulture, (6) Agricultural Resources, and (7) Forestry, were developed and introduced to high school applied biological and agricultural occupations…

  18. Ergonomics Perspective in Agricultural Research: A User-Centred Approach Using CAD and Digital Human Modeling (DHM) Technologies

    Science.gov (United States)

    Patel, Thaneswer; Sanjog, J.; Karmakar, Sougata

    2016-06-01

    Computer-aided Design (CAD) and Digital Human Modeling (DHM) (specialized CAD software for virtual human representation) technologies endow unique opportunities to incorporate human factors pro-actively in design development. Challenges of enhancing agricultural productivity through improvement of agricultural tools/machineries and better human-machine compatibility can be ensured by adoption of these modern technologies. Objectives of present work are to provide the detailed scenario of CAD and DHM applications in agricultural sector; and finding out means for wide adoption of these technologies for design and development of cost-effective, user-friendly, efficient and safe agricultural tools/equipment and operator's workplace. Extensive literature review has been conducted for systematic segregation and representation of available information towards drawing inferences. Although applications of various CAD software have momentum in agricultural research particularly for design and manufacturing of agricultural equipment/machinery, use of DHM is still at its infancy in this sector. Current review discusses about reasons of less adoption of these technologies in agricultural sector and steps to be taken for their wide adoption. It also suggests possible future research directions to come up with better ergonomic design strategies for improvement of agricultural equipment/machines and workstations through application of CAD and DHM.

  19. Urban Agriculture : Sustainability Multiplier

    OpenAIRE

    Årevall, Agnieszka Janicka

    2013-01-01

    For some years now, the phenomena of urban agriculture have been present in the public discourse on cities and sustainability. It is often assumed that urban agriculture has the potential to contribute to an increased sustainability of the cities. However, many practical and theoretical obstacles might have to be overcome in order to realize this potential. One ambition of this thesis is to analyse urban agriculture as a “sustainability multiplier” – that is, as a practice that can positively...

  20. Agriculture and riparian areas

    OpenAIRE

    Krueger, William C.

    1994-01-01

    Agriculture has historically been based in the subirrigated riparian ecosystems. Often the engineering and agricultural practices have altered the systems and many of the associated ecological processes. In the Western United States, the most common agricultural practices affecting riparian systems has been livestock grazing. Effects have been both positive and negative. Lack of management has deteriorated many of these systems. Current research has shown what types of management have been su...

  1. Biosurfactants in agriculture

    OpenAIRE

    Sachdev, Dhara P.; Cameotra, Swaranjit S.

    2013-01-01

    Agricultural productivity to meet growing demands of human population is a matter of great concern for all countries. Use of green compounds to achieve the sustainable agriculture is the present necessity. This review highlights the enormous use of harsh surfactants in agricultural soil and agrochemical industries. Biosurfactants which are reported to be produced by bacteria, yeasts, and fungi can serve as green surfactants. Biosurfactants are considered to be less toxic and eco-friendly and ...

  2. Vulnerability in Agriculture

    OpenAIRE

    Znaor, Darko

    2009-01-01

    The impact from climate change on agriculture is expected to be significant because of the vulnerability of agriculture to climate conditions in general. Precipitation, temperature, weather extremes and evaporation rates all impact production. Agriculture is important to the economy of Croatia due to its overall value and its impact on food security, vulnerable populations, and the employment it generates. In 2001, 92% of Croatia was classified as rural and 48% of the Croatian population live...

  3. Risk management in agriculture

    OpenAIRE

    Bharat Ramaswami; Shamika Ravi; S.D. Chopra

    2003-01-01

    This monograph was written to be part of the series of studies commissioned by the Ministry of Agriculture under the rubric of "State of Indian Farmer - A Millennium Study". On the basis of existing literature, this study documents the status of our knowledge on risks of agriculture and their management. Chapter 2 discusses the evidence on the nature, type and magnitude of agricultural risks. Chapter 3 discusses farmer strategies to combat risk. In addition to the mechanisms at the level of t...

  4. Measuring agricultural policy bias

    DEFF Research Database (Denmark)

    Jensen, Henning Tarp; Robinson, Sherman; Tarp, Finn

    2010-01-01

    that the agricultural price incentive bias generally perceived to exist during the 1980s was largely eliminated during the 1990s. Results also demonstrate that general equilibrium effects and country-specific characteristics are crucial for determining the sign and magnitude of agricultural bias. Our comprehensive...... protection measure is therefore uniquely suited to capture the full impact of trade policies on relative agricultural price incentives....

  5. Agricultural Development Bank Reform

    OpenAIRE

    Seibel, Hans Dieter

    2001-01-01

    Agricultural development banks (AgDBs), which are not viable, should either be closed, or transformed into self-reliant, sustainable financial intermediaries. Experience shows that reform is possible. Among the prominent cases are Bank Rakyat Indonesia (BRI) and Bank for Agriculture and Agricultural Cooperatives (BAAC, Thailand) as well as ADB/Nepal, which has been transforming its small farmer credit program into financially self-reliant local financial intermediaries owned and managed by th...

  6. Sustainable Agricultural Marketing Initiatives

    OpenAIRE

    Hakan Adanacıoğlu

    2015-01-01

    Sustainable marketing is a holistic approach that puts equal emphasis on environmental, social equity, and economic concerns in the development of marketing strategies. The purpose of the study is to examine and discuss the sustainable agricultural marketing initiatives practiced throughout the World and Turkey, and to put forth suggestions to further improve the performance of agricultural marketing initiatives in Turkey. Some of the sustainable agricultural marketing initiatives practiced a...

  7. Urban Agricultural Event

    OpenAIRE

    Camm, Kevin

    2012-01-01

    Many authors and researchers agree that our youth will benefit from learning about agriculture. “Agricultural literacy is an essential factor for continuing success of the nation. It is important to reach the population when it is most vulnerable and susceptible to learning; this consists of the children of today’s world” (Schmidbauer, Pastor, & Elliot, 2004; p. 2). Ryan and Lockaby suggest that if the population possesses an understanding of agriculture, they are more likely to benefit socie...

  8. Agriculture - reconciling ancient tensions

    Directory of Open Access Journals (Sweden)

    David Atkinson

    2002-09-01

    Full Text Available Decision-making in agriculture has tended to be driven by factors other than environmental concerns. This may be changing, and perhaps the emphases of the two creation accounts in Genesis (responsible management or 'dominion', and active care may become more important. The paper examines a number of current developments in agriculture (synthetic fertilizers and pesticides, genetic manipulation, and organic versus industrial methodologies and discusses the issues they raise for agricultural productivity and the human communities dependent on farming. The questions raised are complex; we are faced with establishing a new paradigm for agricultural practice.

  9. Malawi - Conservation Agriculture

    Data.gov (United States)

    Millenium Challenge Corporation — The randomized control trial impact evaluation tests different strategies for communicating information about agricultural technologies to smallholder maize farmers...

  10. Regionalisation of Croatian Agriculture

    Directory of Open Access Journals (Sweden)

    Ferdo Bašić

    2007-03-01

    Full Text Available After becoming self-standing state one of new needs of Croatia important for agricultural profession, farmers, policy makers and public needs was regionalization of agriculture. It is the analyse of state of agroecological conditions in agrosphere and based on results identification and territorial separation of agricultural regions as parts of agrosphere with similar conditions for plant and animal growing and similar farming systems. On this track within a special project we fi nished an inventory of agrosphere, result of which is Regionalisation of Croatian Agriculture presented in this paper. Following wise message of old Chinese proverb cited above, the starting approach is the MFCAL concept (Multifunctional Character of Agriculture and Land, which means that apart from very important and primary economic, agriculture and agricultural land (soil in human life play other roles (functions of similar importance; environmental, social, cultural and spatial, as well as the role of shaping the cultural landscape as a factor of rural development. As well, we respect the point of view prevailing in EU that all natural resources used in agriculture but at the fi rst place soil as a major one, need sustainable use and efficient protection. Using the data on Land resource potential based primarily on data of General Soil Map of Croatia (GSM in a scale of 1:50 000 and results of our research in the period 2000 – 2003, the agrosphere of Croatia is divided in three agricultural regions; Pannonian with four, Mountain with two and Adriatic with three subregions.

  11. System of Controlling the Reliability of Hydraulic Machinery in Oil and Gas Facilities

    Science.gov (United States)

    Zemenkova, M. Yu; Zemenkov, Yu D.; Pimnev, A. L.; Kurushina, E. V.

    2016-04-01

    Under current conditions of operating hazardous production facilities and the level of environmental regulations, a crucial issue is evaluation and control of technological machinery reliability in hydrocarbon transportation. The authors have developed methodologies and a complex of models and algorithms aimed at creating a support system for control decision-making. It is based on the concepts of the reliability theory and regulatory requirements on technological machinery operation. A mathematical complex has been developed for predicting technical state changes and reliability in order to improve the decision-making efficiency concerning the necessity of preventive maintenance. The example is fundamental statements on reliability evaluation using fluctuation analysis.

  12. Industry sector analysis, Mexico: Oil and gas field machinery and equipment. Export Trade Information

    International Nuclear Information System (INIS)

    The Industry Sector Analyses (I.S.A.) for oil and gas field machinery and equipment contains statistical and narrative information on projected market demand, end-users, receptivity of Mexican consumers to U.S. products, the competitive situation - Mexican production, total import market, U.S. market position, foreign competition, and competitive factors, and market access - Mexican tariffs, non-tariff barriers, standards, taxes and distribution channels. The I.S.A. provides the United States industry with meaningful information regarding the Mexican market for oil and gas field machinery and equipment

  13. Main Challenges of Agriculture of Ukraine in Globalization

    Directory of Open Access Journals (Sweden)

    Liubov Galperina

    2014-11-01

    Full Text Available Based on the analysis of the problems of agriculture of Ukraine the author highlighted categories of problems of agriculture in Ukraine and with the help of the Thomas L. Saaty analytic hierarchy process and identified their rating. The next stage of the rating definitions and problems is the pairwise comparisons of each problem category. The first place in the category value is “economic”, the second – “infrastructure”, the third – “social”, and the fourth – “production”, in the last fifth place – “environmental” problems. According to the analysis in each category is provided a list of the main problems of agriculture in Ukraine: small-scale production, insufficient condition of fruit and vegetable warehouses, weakness of non-productive cooperatives, rising unemployment, opacity of land relations, inconsistency with international standards of quality and safety, low investment adaptation of Ukrainian legal acts to EU requirements, unsatisfactory condition of engineering and transport infrastructure of rural settlements, lack of technical support for producers of agricultural machinery and low-sales service, non-compliance with agricultural storage technologies, running state of social infrastructure and other.

  14. Agricultural Industrialization: It's Inevitable

    OpenAIRE

    Urban, Thomas N.

    1991-01-01

    The industrialization of agriculture is with us. It's driven by consumer and processor needs, supported by new and useful technology, and augmented by the severe agricultural recession of the 1980s, which changed attitudes towards risk. The consequences for farm policy and rural development are significant, and should be favorable.

  15. Agriculture. Pt. 1

    International Nuclear Information System (INIS)

    The study investigates the impact of agriculture on the earth's atmosphere. It describes the natural carbon cycle, the socioeconomic factors that influence it, and the climate effects. The climatic relevance of gaseous sulphur and nitrogen compounds, methane and other hydrocarbons, and ammonia emissions from biological and agricultural process is discussed. (SR)

  16. Managing risk in agriculture

    OpenAIRE

    2015-01-01

    "This book examines the implications of risk management for policy in agriculture. Opening with a chapter on risk management principles and guidelines for policy design in agriculture, the book goes on to look at quantitative analysis of risk and then at policy in various countries." --> Publisher's description.

  17. Agricultural Sector Risk Assessment

    OpenAIRE

    World Bank

    2016-01-01

    In the agricultural sector, risks are inherent and ubiquitous, posing potentially serious consequences for stakeholders and consumers. Risks disrupt supply chains, causing extensive financial and economic losses. Agricultural risks are also the principal cause of transient food insecurity, creating a poverty trap for millions of households across the developing world that enforces a viciou...

  18. Legislature Abolishes Agricultural Tax

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

      China's 2,600-year-old agricultural tax will be rescinded as of Jan. 1,2006, after China's top legislature voted on December 27 to adopt a motion on the regulations revoking the agricultural tax.……

  19. Precision agricultural systems

    Science.gov (United States)

    Precision agriculture is a new farming practice that has been developing since late 1980s. It has been variously referred to as precision farming, prescription farming, site-specific crop management, to name but a few. There are numerous definitions for precision agriculture, but the central concept...

  20. Good Wetland Agricultural Practices

    OpenAIRE

    Hengsdijk, H.; Zingstra, H.L.

    2009-01-01

    Within the Guiding Agriculture Wetland Interaction (GAWI) project the Driver!Pressure!State! Impact!Response (DPSIR) approach has been adopted to describe and analyse agriculture!wetland interactions. The DPSIR approach provides a consistent framework to analyse the complex causal chain among drivers, pressures, state and impacts, and facilitates the targeted identification of response strategies aimed at improving the sustainability of wetlands.

  1. Agricultural risk management

    DEFF Research Database (Denmark)

    Lund, Mogens; Oksen, Arne; Larsen, Torben U.;

    2005-01-01

    A new model for risk management in agriculture is described in the paper. The risk model is constructed as a context dependent process, which includes four main phases. The model is aimed at agricultural advisors, who wish to facilitate and disseminate risk management to farmers. It is developed...

  2. Agriculture and food processing

    International Nuclear Information System (INIS)

    This chapter discuss the application of nuclear technology in agriculture sector. Nuclear Technology has help agriculture and food processing to develop tremendously. Two techniques widely use in both clusters are ionization radiation and radioisotopes. Among techniques for ionizing radiation are plant mutation breeding, SIT and food preservation. Meanwhile radioisotopes use as a tracer for animal research, plant soil relations water sedimentology

  3. Radiation technology in agriculture

    International Nuclear Information System (INIS)

    The Department of Atomic Energy through its research, development and deployment activities in nuclear science and technology, has been contributing towards enhancing the production of agricultural commodities and their preservation. Radiations and radioisotopes are used in agricultural research to induce genetic variability in crop plants to develop improved varieties, to manage insect pests, monitor fate and persistence of pesticides, to study fertilizer use efficiency and plant micronutrient uptake and also to preserve agricultural produce. Use of radiation and radioisotopes in agriculture which is often referred to as nuclear agriculture is one of the important fields of peaceful applications of atomic energy for societal benefit and BARC has contributed significantly in this area. 41 new crop varieties developed at BARC have been released and Gazette notified by the MoA, GOI for commercial cultivation and are popular among the farming community and grown through out the country

  4. Sustainable Agricultural Marketing Initiatives

    Directory of Open Access Journals (Sweden)

    Hakan Adanacıoğlu

    2015-07-01

    Full Text Available Sustainable marketing is a holistic approach that puts equal emphasis on environmental, social equity, and economic concerns in the development of marketing strategies. The purpose of the study is to examine and discuss the sustainable agricultural marketing initiatives practiced throughout the World and Turkey, and to put forth suggestions to further improve the performance of agricultural marketing initiatives in Turkey. Some of the sustainable agricultural marketing initiatives practiced around the world are carried out through civil organizations. Furthermore; some of these initiatives have also launched by farmers, consumers, food processors and retailers. The long-term strategies to increase these initiatives should be determined due to the fact that examples of successful sustainable agricultural marketing initiatives are inadequate and cannot be spread in Turkey. In this context, first of all, the supports provided by the government to improve agricultural marketing systems, such as EU funds for rural development should be compatible with the goals of sustainable marketing. For this purpose, it should be examined whether all proposed projects related to agricultural marketing meet the social, economic, and environmental principles of sustainable marketing. It is important that supporting organizations, especially civil society organisations, should take an active role for faster dissemination and adoption of sustainable agricultural marketing practices in Turkey. These organizations may provide technical assistance in preparing successful project proposals and training to farm groups. In addition, the other organizations, such as local administrations, producers' associations, cooperatives, can contribute to the success of sustainable agricultural marketing initiatives. The use of direct marketing strategies and vertical integration attempts in sustainable agricultural marketing initiatives that will likely be implemented in Turkey is

  5. Fault Diagnosis for Rotating Machinery Using Vibration Measurement Deep Statistical Feature Learning

    Directory of Open Access Journals (Sweden)

    Chuan Li

    2016-06-01

    Full Text Available Fault diagnosis is important for the maintenance of rotating machinery. The detection of faults and fault patterns is a challenging part of machinery fault diagnosis. To tackle this problem, a model for deep statistical feature learning from vibration measurements of rotating machinery is presented in this paper. Vibration sensor signals collected from rotating mechanical systems are represented in the time, frequency, and time-frequency domains, each of which is then used to produce a statistical feature set. For learning statistical features, real-value Gaussian-Bernoulli restricted Boltzmann machines (GRBMs are stacked to develop a Gaussian-Bernoulli deep Boltzmann machine (GDBM. The suggested approach is applied as a deep statistical feature learning tool for both gearbox and bearing systems. The fault classification performances in experiments using this approach are 95.17% for the gearbox, and 91.75% for the bearing system. The proposed approach is compared to such standard methods as a support vector machine, GRBM and a combination model. In experiments, the best fault classification rate was detected using the proposed model. The results show that deep learning with statistical feature extraction has an essential improvement potential for diagnosing rotating machinery faults.

  6. Conflicting views on the membrane fusion machinery and the fusion pore

    DEFF Research Database (Denmark)

    Sørensen, Jakob B

    2009-01-01

    of the assembly of the fusogenic SNARE-complex. Here, I review conflicting views on the function of the core fusion machinery consisting of the SNAREs, Munc18, complexin, and synaptotagmin. Munc18 controls docking of vesicles to the plasma membrane and initial SNARE-complex assembly, whereas complexin...

  7. The phototransduction machinery in the rod outer segment has a strong efficacy gradient

    KAUST Repository

    Mazzolini, Monica

    2015-05-04

    Rod photoreceptors consist of an outer segment (OS) and an inner segment. Inside the OS a biochemical machinery transforms the rhodopsin photoisomerization into electrical signal. This machinery has been treated as and is thought to be homogenous with marginal inhomogeneities. To verify this assumption, we developed a methodology based on special tapered optical fibers (TOFs) to deliver highly localized light stimulations. By using these TOFs, specific regions of the rod OS could be stimulated with spots of light highly confined in space. As the TOF is moved from the OS base toward its tip, the amplitude of saturating and single photon responses decreases, demonstrating that the efficacy of the transduction machinery is not uniform and is 5-10 times higher at the base than at the tip. This gradient of efficacy of the transduction machinery is attributed to a progressive depletion of the phosphodiesterase along the rod OS. Moreover we demonstrate that, using restricted spots of light, the duration of the photoresponse along the OS does not increase linearly with the light intensity as with diffuse light. © 2015, National Academy of Sciences. All rights reserved.

  8. Recent evolutions of refrigerating machineries and heat pumps; Evolutions recentes des machines a froid et thermopompes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This book of proceedings reports on 10 papers (or series of transparencies) concerning some recent developments about refrigerating machineries and heat pumps as used in space heating, air-conditioning and industrial refrigeration. Various aspects are developed: thermodynamic cycles, thermal performances, dimensioning, modeling, refrigerants substitution, design of flanged exchangers, compressors etc.. (J.S.)

  9. Textile Machinery Sector Takes on Economic Crisis, but Requests Urgent Measures

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Preliminary year-end 2008 figures for Italy's textile machinery industry register a 18% drop in production compared to the previous year, with a total production value estimated at 2,285 billion Euros. This decline affects both Italy's domestic market and export sales.

  10. An integrated method for matching forest machinery and a weight-value adjustment

    Institute of Scientific and Technical Information of China (English)

    Dan Li

    2014-01-01

    Proper matching of forestry machinery is important when raising mechanization levels for forestry production. In the matching process, forestry machinery needs not only expertise, but also improved methods for solving problems. I propose combination of case-based reasoning (CBR) and rule-based reasoning (RBR) by calculating the similarity of quantitative parameters of various forestry machines in an analytical and hierarchical process. I calculated the similarity of machin-ery used in forest industries to enable better selection and matching of equipment. I propose a weight-value adjusting method based on sums of squares of deviations in which the individual parameter weights were modified in the process of application. During the process of system design, I put forward a design method knowledge base and generated a dynamic web reasoning framework to integrate the processes of forest industry machinery selection and weight-value adjustment. This enables expansion of the scope of the complete system and enhancement of the reasoning efficiency. I demonstrate the validity and practicability of this method using a practical example.

  11. Fault Diagnosis for Rotating Machinery Using Vibration Measurement Deep Statistical Feature Learning.

    Science.gov (United States)

    Li, Chuan; Sánchez, René-Vinicio; Zurita, Grover; Cerrada, Mariela; Cabrera, Diego

    2016-01-01

    Fault diagnosis is important for the maintenance of rotating machinery. The detection of faults and fault patterns is a challenging part of machinery fault diagnosis. To tackle this problem, a model for deep statistical feature learning from vibration measurements of rotating machinery is presented in this paper. Vibration sensor signals collected from rotating mechanical systems are represented in the time, frequency, and time-frequency domains, each of which is then used to produce a statistical feature set. For learning statistical features, real-value Gaussian-Bernoulli restricted Boltzmann machines (GRBMs) are stacked to develop a Gaussian-Bernoulli deep Boltzmann machine (GDBM). The suggested approach is applied as a deep statistical feature learning tool for both gearbox and bearing systems. The fault classification performances in experiments using this approach are 95.17% for the gearbox, and 91.75% for the bearing system. The proposed approach is compared to such standard methods as a support vector machine, GRBM and a combination model. In experiments, the best fault classification rate was detected using the proposed model. The results show that deep learning with statistical feature extraction has an essential improvement potential for diagnosing rotating machinery faults. PMID:27322273

  12. The Machinery of Management: Communication I (MM1). Workforce 2000 Partnership.

    Science.gov (United States)

    Enterprise State Junior Coll., AL.

    This curriculum package on communications, the machinery of management for new hires, has been developed by the Workforce 2000 Partnership, a network of industries and educational institutions that provides training in communication, computation, and creative thinking to employees and supervisors in textile, apparel, and carpet industries at 15…

  13. Application of the quantitative oil monitoring to analysing the operating condition of marine machinery

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Based on the data of Fourier transform infra-red (FTIR) spectroscopy, spectrometric oilanalysis (SOA) and other routine methods, the experiment of oil monitoring for steering propellersis discussed. The experiment demonstrates the FTIR spectroscopy can rapidly and easily obtainthe results in laboratory analysis, and combine with spectrometer oil analysis, complementary in-formation is most effective to condition monitoring of marine machinery.

  14. Special characteristics of the transcription and splicing machinery in photoreceptor cells of the mammalian retina.

    Science.gov (United States)

    Derlig, Kristin; Giessl, Andreas; Brandstätter, Johann Helmut; Enz, Ralf; Dahlhaus, Regina

    2015-11-01

    Chromatin organization and the management of transcription and splicing are fundamental to the correct functioning of every cell but, in particular, for highly active cells such as photoreceptors, the sensory neurons of the retina. Rod photoreceptor cells of nocturnal animals have recently been shown to have an inverted chromatin architecture compared with rod photoreceptor cells of diurnal animals. The heterochromatin is concentrated in the center of the nucleus, whereas the genetically active euchromatin is positioned close to the nuclear membrane. This unique chromatin architecture suggests that the transcription and splicing machinery is also subject to specific adaptations in these cells. Recently, we described the protein Simiate, which is enriched in nuclear speckles and seems to be involved in transcription and splicing processes. Here, we examine the distribution of Simiate and nuclear speckles in neurons of mouse retinae. In retinal neurons of the inner nuclear and ganglion cell layer, Simiate is concentrated in a clustered pattern in the nuclear interior, whereas in rod and cone photoreceptor cells, Simiate is present at the nuclear periphery. Further staining with markers for the transcription and splicing machinery has confirmed the localization of nuclear speckle components at the periphery. Comparing the distribution of nuclear speckles in retinae of the nocturnal mouse with the diurnal degu, we found no differences in the arrangement of the transcription and splicing machinery in their photoreceptor cells, thus suggesting that the organization of these machineries is not related to the animal's lifestyle but rather represents a general characteristic of photoreceptor organization and function. PMID:26013685

  15. Study on Fuzzy Decision for Purchasing Spare Parts for Machinery Equipment

    Institute of Scientific and Technical Information of China (English)

    YANG Cheng-xian; ZHANG Qi

    2003-01-01

    For purchasing spare parts for machinery products, the general principle, procedure and method are put forward in the paper. Fuzzy theory and method are applied to set up a decisive model for purchasing spare parts. By working out the kinds and quantities of spare parts, the purchase of parts is provided with scientific decision.

  16. The relationship between metabolism and the autophagy machinery during the innate immune response

    OpenAIRE

    Martinez, Jennifer; Verbist, Katherine; Wang, Ruoning; Green, Douglas R.

    2013-01-01

    The innate immune response is shaped by multiple factors, including both traditional autophagy and LC3-associated phagocytosis (LAP). As the autophagic machinery is engaged during times of nutrient stress, arising from scarcity or pathogens, we examine how autophagy, specifically LAP, and cellular metabolism together influence macrophage function and the innate immune response.

  17. Analysis of the Import & Export of China Textile Machinery 2010

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    During 2010,the total amount of import and export of textile machinery enjoyed a year-on-year increase of 59.04% to 6.059 billion USD,in which the export rose 45.07% year on year to 1.757 billion USD,

  18. UCMTF President:2010 Interview French textile machinery manufacturers on the road to recovery

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Have Textile machinery manufacturers been hard hit by the financial and economic crisis? Bruno Ameline: The industrial equipment sector is extremely cyclical and our companies have to adapt to major investment phases like in 2006 and 2007 and to brutal stops but no one could have expected such the sudden crash that began in the summer of 2008.

  19. Mechanical design handbook for elastomers. [the design of elastomer dampers for application in rotating machinery

    Science.gov (United States)

    Darlow, M.; Zorzi, E.

    1981-01-01

    A comprehensive guide for the design of elastomer dampers for application in rotating machinery is presented. Theoretical discussions, a step by step procedure for the design of elastomer dampers, and detailed examples of actual elastomer damper applications are included. Dynamic and general physical properties of elastomers are discussed along with measurement techniques.

  20. Energy-autonomous wireless vibration sensor for condition-based maintenance of machinery

    NARCIS (Netherlands)

    Wang, Z.; Bouwens, F.; Vullers, R.; Petré, F.; Devos, S.

    2011-01-01

    This paper addresses the development of an energy-autonomous wireless vibration sensor for condition-based monitoring of machinery. Such technology plays an increasingly important role in modern manufacturing industry. In this work, energy harvesting is realized by resorting to a custom designed the

  1. A review on empirical mode decomposition in fault diagnosis of rotating machinery

    Science.gov (United States)

    Lei, Yaguo; Lin, Jing; He, Zhengjia; Zuo, Ming J.

    2013-02-01

    Rotating machinery covers a broad range of mechanical equipment and plays a significant role in industrial applications. It generally operates under tough working environment and is therefore subject to faults, which could be detected and diagnosed by using signal processing techniques. Empirical mode decomposition (EMD) is one of the most powerful signal processing techniques and has been extensively studied and widely applied in fault diagnosis of rotating machinery. Numerous publications on the use of EMD for fault diagnosis have appeared in academic journals, conference proceedings and technical reports. This paper attempts to survey and summarize the recent research and development of EMD in fault diagnosis of rotating machinery, providing comprehensive references for researchers concerning with this topic and helping them identify further research topics. First, the EMD method is briefly introduced, the usefulness of the method is illustrated and the problems and the corresponding solutions are listed. Then, recent applications of EMD to fault diagnosis of rotating machinery are summarized in terms of the key components, such as rolling element bearings, gears and rotors. Finally, the outstanding open problems of EMD in fault diagnosis are discussed and potential future research directions are identified. It is expected that this review will serve as an introduction of EMD for those new to the concepts, as well as a summary of the current frontiers of its applications to fault diagnosis for experienced researchers.

  2. 46 CFR 182.460 - Ventilation of spaces containing machinery powered by, or fuel tanks for, gasoline.

    Science.gov (United States)

    2010-10-01

    ... accordance with ABYC H-2 (incorporated by reference; see 46 CFR 175.600) or 33 CFR 183, subpart K... 46 Shipping 7 2010-10-01 2010-10-01 false Ventilation of spaces containing machinery powered by... SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) MACHINERY INSTALLATION...

  3. 33 CFR 155.400 - Platform machinery space drainage on oceangoing fixed and floating drilling rigs and other...

    Science.gov (United States)

    2010-07-01

    ... Elimination System (NPDES) permit issued in accordance with section 402 of the Clean Water Act and 40 CFR... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Platform machinery space drainage... machinery space drainage on oceangoing fixed and floating drilling rigs and other platforms. (a) No...

  4. 49 CFR 1242.36 - Machinery repair and equipment damaged (accounts XX-26-40 and XX-26-48).

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Machinery repair and equipment damaged (accounts XX-26-40 and XX-26-48). 1242.36 Section 1242.36 Transportation Other Regulations Relating to... FOR RAILROADS 1 Operating Expenses-Equipment § 1242.36 Machinery repair and equipment...

  5. Establishment of evaluation model for tobacco field machinery selection%烟草田间作业机械评价模型的构建

    Institute of Scientific and Technical Information of China (English)

    张卫鹏; 郑志安; 王刚; 高振江; 杨宝玲; 王继承

    2015-01-01

    In order to avoid the bias occurred in empirical method for agricultural machinery selection, such as testing operation effects by field demonstration or organoleptic evaluation, this essay aims to develop an applicability satisfaction based evaluation solution for the agricultural machinery selection test. By adopting tobacco planting and tobacco field machinery as study objects, a practical production management oriented model is proposed. The process of tobacco planting is divided into ten links of three stages (Preparation, Planting, and Management). An evaluation index system, involving forty-four indexes in all, is set at the same time. In which, ten evaluation models correspond to ten tobacco planting links respectively, while each of the evaluation models consists of four major operational indicators, namely cost, efficiency, effect, and effectiveness. The system samples data from on-site test based on quantitative evaluation indicators as benchmark under agronomic requirements, and builds up a comprehensive evaluation model by means of AHP. The ridging link is taken as an example to demonstrate the application of the model. In the experiment, seven sets of ridging machinery are involved (with serial numbers as I, II, …… , and VII). In which, IV and V are of Caterpillar type; VII is of Multifunctional, and all others are of Walk-Behind. From the process of the experiment, the following performances have been presented. First, the Walk-Behind sets work best from the perspective of operation effect and stability due to their small overall sizes that facilitate adjusting the working attitudes in time. Among all types, these sets show the best also in safety assessment that they have lest risk of rollover when operating between small pieces of fields in hilly area. However, the operation efficiency is hard to be largely increased restricted by the slow walking speed of operator. Second, due to the big size, the Caterpillars are slow in both operation and

  6. BOOK REVIEWS - Precision agriculture

    Directory of Open Access Journals (Sweden)

    Stanisław Samborski

    2007-01-01

    Full Text Available Precision agriculture (PA is a term, which has recently become very popular in agronomy. In short this term means crop production based on site-specific crop management (SSCM. Precision agriculture is an integrated agricultural management system incorporating different science disciplines e.g. crop science, agricultural engineering and geostatistics. It also uses numerous tools i.e., geographic information system (GIS, Global Positioning System (GPS, remote sensing yield monitors. Because of the multidisciplinary character of precision agriculture, books published on this subject differ in their content. The first books on this topic appeared in the mid 90’ of the last century. The intention of this paper is to present reviews of three books the titles of which each contains the term “precision agriculture”. The books are as follows:1 Handbook of Precision Agriculture – Principles and Applications (2006 edited by Ancha Srinivasan. 2 Precision Agriculture’05 (2005 edited by John V. Stafford 3 Precision Agriculture (2006 by Terry A. Brasse.

  7. Future trends in agricultural engineering.

    OpenAIRE

    Jongebreur, A.A.; Speelman, L.

    1997-01-01

    Beside traditional mechanical engineering, other engineering branches such as electronics, control engineering and physics play their specific role within the agricultural engineering field. Agricultural engineering has affected and stimulated major changes in agriculture. In the last decades agricultural engineering has also focused on environmental aspects. Nowadays knowledge and expertise generated in several agricultural and environmental engineering fields must be integrated with experti...

  8. Atoms in Agriculture

    Energy Technology Data Exchange (ETDEWEB)

    Osborne, Thomas S. [University of Tennessee

    1965-01-01

    Agriculture benefits from the applications of research. Radioactive techniques have been used to study soils, plants, microbes, insects, farm animals, and new ways to use and preserve foodstuffs. Radioactive atoms are not used directly by farmers but are used in research directed by the U. S. Department of Agriculture and Atomic Energy Commission, by the agricultural experiment stations of the various states, and by numerous public and private research institutions. From such research come improved materials and methods which are used on the farm.

  9. Agriculture. Sector 4

    International Nuclear Information System (INIS)

    In Lebanon, emissions of greenhouse gases from agricultural activities occur through the following processes: -enteric fermentation and manure management of the domestic livestock emits methane and nitrous oxide. -agricultural burning of crop residues is of minor importance since field burning of crop residue is not a common practice in Lebanon -agricultural soils are a source of nitrous oxide directly from the soils and from animal production, and indirectly from the nitrogen added to the soils. The following results were obtained for the inventory year 1994: 7.60955 Gg of methane, 3.01478 Gg of nitrous oxide, 0.00146 Gg of nitrogen oxides and 0.04306 Gg of carbon monoxide

  10. FOREWORD: The XXV IAHR Symposium on Hydraulic Machinery and Systems marks half a century tradition

    Science.gov (United States)

    Susan-Resiga, Romeo

    2010-05-01

    IAHR75_logoUPT90_logoARFT_logo International Association of Hydro-Environment Engineering and Research'Politehnica' University of TimisoaraRomanian Academy - Timisoara Branch The 25th edition of the IAHR Symposium on Hydraulic Machinery and Systems, held in Timisoara, Romania, 20-24 September 2010, jointly organized by the 'Politehnica' University of Timisoara and the Romanian Academy - Timisoara Branch, marks a half century tradition of these prestigious symposia. However, it is the first time that Romania hosts such a symposium, and for good reasons. The Romanian electrical power system has a total of 20,630 MW installed power, out of which 6,422 MW in hydropower plants. The energy produced in hydropower facilities was in 2008 of 17,105 GWh from a total of 64,772 GWh electrical energy production. Moreover, for the period 2009-2015, new hydropower capacities are going to be developed, with a total of 2,157 MW installed power and an estimated 5,770 GWh/year energy production. Within the same period of time, the refurbishment, modernization and repair programs will increase the actual hydropower production with an estimated 349 GWh/year. The 'Politehnica' University of Timisoara is proud to host the 25th IAHR Symposium on Hydraulic Machinery and Systems, in the year of its 90th anniversary. The 'Politehnica' University of Timisoara is one of the largest and most well-known technical universities from Central and Eastern Europe. It was founded in 1920, a short time after the union into one state of all the Romanian territories, following the end of the First World War, in order to respond to the need engineers felt by the Romanian society at that time, within the economical development framework. During its 90 years of existence, 'Politehnica' University of Timisoara educated over 100,000 engineers, greatly appreciated both in Romania and abroad, for their competence and seriousness. King Ferdinand I of Romania said while visiting the recently established

  11. Agricultural Health and Safety

    Science.gov (United States)

    ... health and safety program. Contact your state or territorial health department or use this directory of local ... producers, small business owners, youth, consumers, and rural communities nationwide. NIOSH Agricultural Safety and Health Centers conduct ...

  12. Agriculture and private sector

    DEFF Research Database (Denmark)

    Sahin, Sila; Prowse, Martin Philip; Weigh, Nadia

    looks set to remain for the next two decades at least. The agriculture and growth evidence paper series has been developed to cover a range of issues that are of most relevance to DFID staff. The paper is not intended to be a comprehensive overview of all issues relating to agriculture and the private......Agriculture is and will continue to be critical to the futures of many developing countries. This may or may not be because agriculture can contribute directly and/or indirectly to economic growth. But it will certainly be critical because poverty is still predominantly a rural phenomenon and this...... sector. It concentrates on those areas that are of particular focus for DFID policy and strategy....

  13. Agricultural Drainage Well Intakes

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Locations of surface intakes for registered agriculture drainage wells according to the database maintained by IDALS. Surface intakes were located from their...

  14. Agricultural Producer Certificates

    Data.gov (United States)

    Montgomery County of Maryland — A Certified Agricultural Producer, or representative thereof, is an individual who wishes to sell regionally-grown products in the public right-of-way. A Certified...

  15. Radioactive contamination and agriculture

    International Nuclear Information System (INIS)

    Some guidelines are presented for the Belgian agriculture to realise three vital objectives in case of a nuclear accident : protection of food quality and public health, radiation protection for farmers and keeping the production apparatus intact. (H.E.)

  16. GREENHOUSE GASES AND AGRICULTURE

    Science.gov (United States)

    Agriculture ranks third in its contribution to Earth's anthropogenically nhanced greenhouse effect. Energy use and production and chlorofluorocarbons are anked first and second, respectively.) pecifically, greenhouse gas sources and inks are increased, and sinks are decreased, by...

  17. The Agriculture Grants Program.

    Science.gov (United States)

    Krogmann, David W.; Key, Joe

    1981-01-01

    Reviews historical background surrounding the origins of the Competitive Research Grants Office, established in 1978 to support basic research related to agriculture. Describes current controversy within the legislature which threatens its existence. (CS)

  18. 3-D Imaging Systems for Agricultural Applications—A Review

    Science.gov (United States)

    Vázquez-Arellano, Manuel; Griepentrog, Hans W.; Reiser, David; Paraforos, Dimitris S.

    2016-01-01

    Efficiency increase of resources through automation of agriculture requires more information about the production process, as well as process and machinery status. Sensors are necessary for monitoring the status and condition of production by recognizing the surrounding structures such as objects, field structures, natural or artificial markers, and obstacles. Currently, three dimensional (3-D) sensors are economically affordable and technologically advanced to a great extent, so a breakthrough is already possible if enough research projects are commercialized. The aim of this review paper is to investigate the state-of-the-art of 3-D vision systems in agriculture, and the role and value that only 3-D data can have to provide information about environmental structures based on the recent progress in optical 3-D sensors. The structure of this research consists of an overview of the different optical 3-D vision techniques, based on the basic principles. Afterwards, their application in agriculture are reviewed. The main focus lays on vehicle navigation, and crop and animal husbandry. The depth dimension brought by 3-D sensors provides key information that greatly facilitates the implementation of automation and robotics in agriculture. PMID:27136560

  19. 3-D Imaging Systems for Agricultural Applications-A Review.

    Science.gov (United States)

    Vázquez-Arellano, Manuel; Griepentrog, Hans W; Reiser, David; Paraforos, Dimitris S

    2016-01-01

    Efficiency increase of resources through automation of agriculture requires more information about the production process, as well as process and machinery status. Sensors are necessary for monitoring the status and condition of production by recognizing the surrounding structures such as objects, field structures, natural or artificial markers, and obstacles. Currently, three dimensional (3-D) sensors are economically affordable and technologically advanced to a great extent, so a breakthrough is already possible if enough research projects are commercialized. The aim of this review paper is to investigate the state-of-the-art of 3-D vision systems in agriculture, and the role and value that only 3-D data can have to provide information about environmental structures based on the recent progress in optical 3-D sensors. The structure of this research consists of an overview of the different optical 3-D vision techniques, based on the basic principles. Afterwards, their application in agriculture are reviewed. The main focus lays on vehicle navigation, and crop and animal husbandry. The depth dimension brought by 3-D sensors provides key information that greatly facilitates the implementation of automation and robotics in agriculture. PMID:27136560

  20. 3-D Imaging Systems for Agricultural Applications—A Review

    Directory of Open Access Journals (Sweden)

    Manuel Vázquez-Arellano

    2016-04-01

    Full Text Available Efficiency increase of resources through automation of agriculture requires more information about the production process, as well as process and machinery status. Sensors are necessary for monitoring the status and condition of production by recognizing the surrounding structures such as objects, field structures, natural or artificial markers, and obstacles. Currently, three dimensional (3-D sensors are economically affordable and technologically advanced to a great extent, so a breakthrough is already possible if enough research projects are commercialized. The aim of this review paper is to investigate the state-of-the-art of 3-D vision systems in agriculture, and the role and value that only 3-D data can have to provide information about environmental structures based on the recent progress in optical 3-D sensors. The structure of this research consists of an overview of the different optical 3-D vision techniques, based on the basic principles. Afterwards, their application in agriculture are reviewed. The main focus lays on vehicle navigation, and crop and animal husbandry. The depth dimension brought by 3-D sensors provides key information that greatly facilitates the implementation of automation and robotics in agriculture.

  1. New Research in Organic Agriculture

    DEFF Research Database (Denmark)

    1996-01-01

    The book is the proceedings from the bi-annual international scientific conference on organic agriculture. The chapters are: - plant and soil interactions, - animal production systems, - traditional knowledge in sustainable agriculture, - research, education and extension in sustainable agriculture...

  2. Overview of organic agriculture

    OpenAIRE

    Kristiansen, P.; Merfield, C.

    2006-01-01

    The acquisition of food, textiles and other resources from plants and animals has been a major concern for human societies, from the earliest days as hunter-gathers, through pastoral and swidden phases, to agrarian societies, with an associated trend away from nomadic to sedentary lifestyles. Yet as agricultural production intensified and expanded, the negative effects on the underlying resource base have also increased. The history of environmental damage caused by agriculture is well docume...

  3. Agricultural Clusters in China

    OpenAIRE

    Kiminami, Lily; Kiminami, Akira

    2009-01-01

    The purpose of this study is to assess the potential of clustering in the development of agriculture and rural communities in China. We shall examine in detail the food industry, which is the link in the food chain that propels the industrialization of agriculture, and identify instances of industrial agglomeration and business collaboration. Next, we shall analyze the externalities (i.e. spillovers) of clusters, demand conditions in cluster formation, and the effectiveness of business collab...

  4. HOMOEOPATHY IN AGRICULTURE

    OpenAIRE

    Singhania, Pawan Kumar; SINGHANIA, ARCHANA

    2014-01-01

    Homoeopathy medicines have been found to be effective in human organisms. Research and application of Homoeopathy drugs in agriculture is slowly finding place. The mode of action of Homoeopathy remedies and simillinum of drug pictures for use in agriculture; basic principles of Homoeopathy and drug administration are discussed. Significant results have been observed using Homoeopathy medicines to fight stress conditions during wet conditions; during hot and dry conditions; in improving germin...

  5. Agriculture Sector Risk Management

    OpenAIRE

    Viktorija Stasytytė; Viktorija Dužinskytė

    2016-01-01

    Agriculture sector is characterized by a particular specificity that is not considered in other fields and because of that agriculture sector is defined as highly risky sector. Response to risk is still very im-portant and responsible activity in this field. According to this, the process and applied strategies of risk management make and ensure that the sector activity and operations are more stable and effective. The aim of the article reflects the need to distinguish the most appropriate a...

  6. TRANSITION AND AGRICULTURE

    OpenAIRE

    Rozelle, Scott D.; Swinnen, Johan F.M.

    2000-01-01

    The overall objectives of our proposed paper is to: (a) systematically document the post-reform trends in agricultural performance in Asia, Europe, and the Former Soviet Union; (b) identify the main reform strategies and institutional innovations that have contributed to the successes and failures of the sector; (c) analyze the mechanisms by which reform policies and initial conditions have affected the transition process in agriculture; and (d) draw lessons and policy implications from the e...

  7. World competitiveness and agriculture

    Directory of Open Access Journals (Sweden)

    J. van Zyl

    1997-07-01

    Full Text Available Against the background of a changing environment in which market factors and greater world trade and competitiveness are increasingly becoming the only criteria for success, a framework for the analysis of world competitiveness is initially developed. This is followed by a discussion on the growth of productivity in agriculture, as well as an exposition of the role of agricultural research. Thirdly, price factors and the terms of trade are discussed, followed by a summary of policy implications.

  8. Brazil Agriculture Policy Review

    OpenAIRE

    Quiroga, Jose; Brooks, Jonathan; Melyukhina, Olga

    2005-01-01

    In June 2005, OECD members met with senior government officials from Brazil to discuss Brazilian agricultural policies and future directions, as a part of a comprehensive agricultural policy review. Ongoing dialogue with Brazil on policy issues is important to fostering a better understanding of global challenges and opportunities that lie ahead. Results of the review will be published by the OECD in 2005. This policy note provides a preview of key findings.

  9. Ghana Agricultural Sector Risk Assessment

    OpenAIRE

    Choudhary, Vikas; D'Alessandro, Stephen

    2015-01-01

    Improved agricultural risk management is one of the core enabling actions of the Group of Eight’s (G-8’s) New Alliance for Food Security and Nutrition. The Agricultural Risk Management Team (ARMT) of the Agriculture and Environment Services Department of the World Bank conducted an agricultural sector risk assessment to better understand the dynamics of agricultural risks and identify appropriate responses, incorporate agricultural risk perspective into decision-making, and bui...

  10. FAPRI 2000 World Agricultural Outlook

    OpenAIRE

    Babcock, Bruce A.; Beghin, John C.; Mohanty, Samarendu; Frank H. Fuller; Jacinto F. Fabiosa; Kaus, Phillip J.; Fang, Cheng; Hart, Chad E.; Kovarik, Karen; Womack, Abner W.; Young, Robert E., II; Suhler, Gregg; Patrick C. Westhoff; Trujillo, Joe; Brown, D. Scott

    2000-01-01

    The Food and Agricultural Policy Research Institute (FAPRI) prepares a preliminary agricultural outlook on world agricultural production, consumption, and trade every fall. This is followed by an outside review, re-evaluation of projections, and completion of the final baseline in January. The FAPRI 2000 World Agricultural Outlook presents these final projections for world agricultural markets. A companion volume, the FAPRI 2000 U.S. Agricultural Outlook, presents the U.S. component of the ba...

  11. Indian Agricultural Marketing- A Review

    OpenAIRE

    Shakeel-Ul-Rehman; M. SELVARAJ; M. Syed Ibrahim

    2012-01-01

    Agriculture in India has directly or indirectly continued to be the source of livelihood to majority of the population. Indian agriculture has seen a lot of changes in its structure. India, predominantly an agricultural economy, has healthy signs of transformation in agriculture and allied activities. India has seen agriculture as a precious tool of economic development as other sectors of production depend on it. Efficient backward and forward integration with agriculture has led to globally...

  12. Childhood agricultural injuries: an update for clinicians.

    Science.gov (United States)

    Wright, Suzanne; Marlenga, Barbara; Lee, Barbara C

    2013-02-01

    Every three days a child dies in an agriculture-related incident, and every day 45 children are injured in the United States. These tragedies should not be regarded as "accidents," as they often follow predictable and preventable patterns. Prevention is not only possible, but vital, since many of these injuries are almost immediately fatal. Major sources of fatal injuries are machinery, motor vehicles, and drowning. Tractor injuries alone account for one-third of all deaths. The leading sources of nonfatal injuries are structures and surfaces, animals (primarily horses), and vehicles (primarily all-terrain vehicles [ATVs]). Children living on farms are at a higher risk than hired workers, and are unprotected by child labor laws. Preschool children and older male youth are at the highest risk for fatal injury, while nonfatal injury was most common among boys aged 10-15 years. Multiple prevention strategies have been developed, yet economic and cultural barriers often impede their implementation. Educational campaigns alone are often ineffective, and must be coupled with re-engineering of machines and safety devices to reduce fatalities. Legislation has the potential to improve child safety, yet political and economic pressures often prohibit changes in child labor laws and mandated safety requirements. Clinicians play a pivotal role in injury prevention, and should actively address common rural risk-taking behaviors as part of the routine office visit in order to help prevent these tragedies. PMID:23395394

  13. Biosurfactants in agriculture.

    Science.gov (United States)

    Sachdev, Dhara P; Cameotra, Swaranjit S

    2013-02-01

    Agricultural productivity to meet growing demands of human population is a matter of great concern for all countries. Use of green compounds to achieve the sustainable agriculture is the present necessity. This review highlights the enormous use of harsh surfactants in agricultural soil and agrochemical industries. Biosurfactants which are reported to be produced by bacteria, yeasts, and fungi can serve as green surfactants. Biosurfactants are considered to be less toxic and eco-friendly and thus several types of biosurfactants have the potential to be commercially produced for extensive applications in pharmaceutical, cosmetics, and food industries. The biosurfactants synthesized by environmental isolates also has promising role in the agricultural industry. Many rhizosphere and plant associated microbes produce biosurfactant; these biomolecules play vital role in motility, signaling, and biofilm formation, indicating that biosurfactant governs plant-microbe interaction. In agriculture, biosurfactants can be used for plant pathogen elimination and for increasing the bioavailability of nutrient for beneficial plant associated microbes. Biosurfactants can widely be applied for improving the agricultural soil quality by soil remediation. These biomolecules can replace the harsh surfactant presently being used in million dollar pesticide industries. Thus, exploring biosurfactants from environmental isolates for investigating their potential role in plant growth promotion and other related agricultural applications warrants details research. Conventional methods are followed for screening the microbial population for production of biosurfactant. However, molecular methods are fewer in reaching biosurfactants from diverse microbial population and there is need to explore novel biosurfactant from uncultured microbes in soil biosphere by using advanced methodologies like functional metagenomics. PMID:23280539

  14. An application of energy and exergy analysis in agricultural sector of Malaysia

    International Nuclear Information System (INIS)

    Thermodynamic losses usually take place in machineries used for agricultural activities. Therefore, it is important to identify and quantify the losses in order to devise strategies or policies to reduce them. An exergy analysis is a tool that can identify the losses occurred in any sector. In this study, an analysis has been carried out to estimate energy and exergy consumption of the agricultural sector in Malaysia. Energy and exergy efficiencies have been determined for the devices used in the agricultural sector of Malaysia, where petrol, diesel and fuel oil are used to run the machineries. Energy and exergy flow diagrams for the overall efficiencies of Malaysian agricultural sector are presented as well. The average overall energy and exergy efficiencies of this sector were found to be 22% and 20.728%, respectively, within the period from 1991 to 2009. These figures were found to be lower than those of Norway but higher than Turkey. - Highlights: ► Highest exergy efficiency was found about 20.7% for the year 2007. ► The exergy efficiency of the agro-sector in Malaysia was lower than that of energy efficiency. ► It was also found that this sector of Malaysia is less efficient than Saudi Arabia and Norway. ► Energy and exergy losses were identified through this analysis. ► Part of the losses can be reduced using appropriate technology, management and policy.

  15. Modelling of agricultural combination driver behaviour from the aspect of safety of movement.

    Science.gov (United States)

    Szczepaniak, Jan; Tanaś, Wojciech; Pawłowski, Tadeusz; Kromulski, Jacek

    2014-01-01

    Statistics show that the travel of agricultural machinery to a work area and their movement during labour is the source of many serious accidents. The most dangerous in consequences prove to be those that occur during transport and associated with maneuvering tractors and machinery (about 30% of all fatal accidents). It can be assumed that at least some of these accidents were caused indirectly by the specific design features of agricultural machines which adversely affect the driveability. The single- and multi-loop structures of the driver-vehicle system models are formulated to study the contributions of various preview and prediction strategies to the path tracking and dynamic performance of the articulated vehicle. In the presented study the compensatory model of driver utilizes the lateral acceleration of the tractor, roll angle of trailer sprung mass and the articulation rate as the internal motion feedback variables. The control model of steering of an agricultural set has been implemented in the Matlab/Simulink environment. The model has been constructed with the use of stochastic methods and operational transmittances describing the various components of the system. The model operational transmittances has been estimated using Box-Jenkins and continuous-time process models from input-output data. The model has been tested using experimental data from road investigation of the agricultural set. PMID:24959798

  16. Modelling of agricultural combination driver behaviour from the aspect of safety of movement

    Directory of Open Access Journals (Sweden)

    Jan Szczepaniak

    2014-06-01

    Full Text Available Statistics show that the travel of agricultural machinery to a work area and their movement during labour is the source of many serious accidents. The most dangerous in consequences prove to be those that occur during transport and associated with maneuvering tractors and machinery (about 30% of all fatal accidents. It can be assumed that at least some of these accidents were caused indirectly by the specific design features of agricultural machines which adversely affect the driveability. The single- and multi-loop structures of the driver-vehicle system models are formulated to study the contributions of various preview and prediction strategies to the path tracking and dynamic performance of the articulated vehicle. In the presented study the compensatory model of driver utilizes the lateral acceleration of the tractor, roll angle of trailer sprung mass and the articulation rate as the internal motion feedback variables. The control model of steering of an agricultural set has been implemented in the Matlab/Simulink environment. The model has been constructed with the use of stochastic methods and operational transmittances describing the various components of the system. The model operational transmittances has been estimated using Box-Jenkins and continuous-time process models from input-output data. The model has been tested using experimental data from road investigation of the agricultural set.

  17. EVALUATION OF THE IMPACT OF INNOVATIVE PROJECTS ON THE COMPETITIVENESS OF AGRICULTURAL HOLDINGS IN SLOVAK REPUBLIC

    Directory of Open Access Journals (Sweden)

    Ľubica RUMANOVSKÁ

    2013-01-01

    Full Text Available The scientific paper evaluates the impact of innovative projects on the competitiveness of agricultural holdings in SR. Evaluation of the impact of innovative projects on competitiveness of agricultural holdings was realized on the selected holdings in Nitra and Trnava region. For the evaluation was used RCR coefficient. With the use of RCR coefficient could be confirmed the scientific hypothesis - The innovative projects realized through Program for rural development SR 2007-2013 have positive impact on competitiveness of agricultural holdings. The possibilities for EU financial support for innovative projects in SR represent important source for introduction of new innovative technologies into production process and in future they can significantly contribute to the growth of competitiveness of agricultural subjects. Therefore, to increase competitiveness of agricultural holdings it is important to focus on modernization of machinery and buildings, use of natural sources for energy production, but also to increase the education and the flow of information between rural inhabitants, mainly farmers. In competitive area of EU agricultural sector it is necessary that agricultural holdings will innovate, not only to create independent flow of innovative products and knowledge, but also to increase its value on internal market. Agricultural holdings –receivers of financial support – have expressed the opinion that financial support realized through PRD SR 2007-2013 had definitely allowed them to implement new processes and products.

  18. 4th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations

    CERN Document Server

    Zimroz, Radoslaw; Bartelmus, Walter; Haddar, Mohamed

    2016-01-01

    The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining, or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book no...

  19. PERFORMANCE EVALUATION METHOD FOR BUSINESS PROCESS OF MACHINERY MANUFACTURER BASED ON DEA/AHP HYBRID MODEL

    Institute of Scientific and Technical Information of China (English)

    WANG Ting; YI Shuping; YANG Yuanzhao

    2007-01-01

    A set of indices for performance evaluation for business processes with multiple inputs and multiple outputs is proposed, which are found in machinery manufacturers. Based on the traditional methods of data envelopment analysis (DEA) and analytical hierarchical process (AHP), a hybrid model called DEA/AHP model is proposed to deal with the evaluation of business process performance. With the proposed method, the DEA is firstly used to develop a pairwise comparison matrix, and then the AHP is applied to evaluate the performance of business process using the pairwise comparison matrix. The significant advantage of this hybrid model is the use of objective data instead of subjective human judgment for performance evaluation. In the case study, a project of business process reengineering (BPR) with a hydraulic machinery manufacturer is used to demonstrate the effectiveness of the DEA/AHP model.

  20. MODELING ENVIRONMENTAL IMPACT OF MACHINERY SECTORS TO PROMOTE SUSTAINABLE DEVELOPMENT OF THAILAND

    Directory of Open Access Journals (Sweden)

    Pruethsan Sutthichaimethee

    2016-01-01

    Full Text Available The objective of this research is to propose an indicator to evaluate environmental impacts from the machinery sectors of Thailand, leading to more sustainable consumption and production in this sector of the economy. The factors used to calculate the forward linkage, backward linkage and real benefit included the total environmental costs. The highest total environmental cost was railway equipment need to be resolved immediately because it uses natural resources in carrying capacity, higher than standard environmental cost, and contribute to low real benefit. Electric accumulator & battery, secondary special industrial machinery, motorcycle, bicycle & other carriages, and engines and turbines need to monitor closely because they are able to link to other production sectors more than other production sector do and they have high environmental cost. In order to decide the sustainable development strategy of the country, there is a need to use this research to support decision-making.

  1. A Fault Diagnosis Method for Rotating Machinery Based on PCA and Morlet Kernel SVM

    Directory of Open Access Journals (Sweden)

    Shaojiang Dong

    2014-01-01

    Full Text Available A novel method to solve the rotating machinery fault diagnosis problem is proposed, which is based on principal components analysis (PCA to extract the characteristic features and the Morlet kernel support vector machine (MSVM to achieve the fault classification. Firstly, the gathered vibration signals were decomposed by the empirical mode decomposition (EMD to obtain the corresponding intrinsic mode function (IMF. The EMD energy entropy that includes dominant fault information is defined as the characteristic features. However, the extracted features remained high-dimensional, and excessive redundant information still existed. So, the PCA is introduced to extract the characteristic features and reduce the dimension. The characteristic features are input into the MSVM to train and construct the running state identification model; the rotating machinery running state identification is realized. The running states of a bearing normal inner race and several inner races with different degree of fault were recognized; the results validate the effectiveness of the proposed algorithm.

  2. TECHNICAL AND INSTITUTIONAL ISSUES OF AN INTELLIGENCE COMPETITIVE SYSTEM FOR WOODWORKING MACHINERY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Ruth M. Hofmann

    2008-09-01

    Full Text Available This paper presents a competitive intelligence system developed for the entrepreneurs of the Brazilian woodworking machinery industry. The system, called MaqMad, was designed as a tool to support the enterprise decision-making and gathers information on the competitive and technological environment of the industry. The architecture of the system allows customizing the access to the information available concerning the particularities of each user. Unlike the original conceptions of IC, eminently intra-organizational, MaqMad was structured as an area of inter-organizational cooperation among companies that make up the industry, as well as suppliers and consumers of such equipment. Based on the characterization of technical and institutional aspects, the main limits of the system operation are presented and the possibilities of overcoming them. Keywords: competitive intelligence; MaqMad, woodworking machinery, benchmarking; technology, competitiveness

  3. Global Effects on Gene Expression in Fission Yeast by Silencing and RNA Interference Machineries

    DEFF Research Database (Denmark)

    Hansen, Klavs R.; Burns, G.; Mata, J.; Volpe, T. A.; Martienssen, R. A.; Bähler, J.; Thon, Genevieve

    2005-01-01

    Histone modifications influence gene expression in complex ways. The RNA interference (RNAi) machinery can repress transcription by recruiting histone-modifying enzymes to chromatin, although it is not clear whether this is a general mechanism for gene silencing or whether it requires repeated...... genes were repressed by both the silencing and RNAi machineries, with transcripts from centromeric repeats and Tf2 retrotransposons being notable exceptions. We found no correlation between repression by RNAi and proximity to LTRs, and the wtf family of repeated sequences seems to be repressed by...... histone deacetylation independent of RNAi. Our data indicate that the RNAi and Clr proteins show only a limited functional overlap and that the Clr proteins play more global roles in gene silencing....

  4. The grouting handbook a step-by-step guide for foundation design and machinery installation

    CERN Document Server

    Harrison, Donald M

    2013-01-01

    Minimize loss of revenue and the downtime of critical assets by avoiding foundation cracking, poor bonds, and initial alignment changes. After their successful introduction as a maintenance material, machinery grouts are now being used for equipment placement in new construction. While certainly suitable for both markets and applications, a successful installation depends on proper grout selection, application, foundation preparation, and forming methods. Therefore, guidelines on their uses and limitations are needed for engineers and maintenance personnel. Based on 45 years of field experi

  5. CORRELATION BETWEEN THE SHORT SEA SHIPPING CAPABILITY (POTENTIAL) OF A PORT AND PORT MACHINERY FLEXIBILITY

    OpenAIRE

    Deda Đelović

    2015-01-01

    The promotion of environmentally friendly modes of transport, in particular Short Sea Shipping, and their effective integration in multimodal transport chains and networks is one from the group of central objectives of the European Union’s transport policy. According to results of different relevant researches available to the author, to the group of problems which still hamper Short Sea Shipping development belongs lack of flexibility in ports. Port machinery flexibility, in general, is one ...

  6. Association of antigen processing machinery and HLA class I defects with clinicopathological outcome in cervical carcinoma

    OpenAIRE

    Mehta, Akash M.; Jordanova, Ekaterina S.; Kenter, Gemma G; Ferrone, Soldano; Fleuren, Gert- Jan

    2007-01-01

    HLA class I loss is a significant mechanism of immune evasion by cervical carcinoma, interfering with the development of immunotherapies and cancer vaccines. We report the systematic investigation of HLA class I and antigen processing machinery component expression and association with clinical outcome. A tissue microarray containing carcinoma lesions from 109 cervical carcinoma patients was stained for HLA class I heavy chains, β2-microglobulin, LMP2, LMP7, LMP10, TAP1, TAP2, ERAP1, tapasin,...

  7. Functional Characterization of Alternate Optimal Solutions of Escherichia coli's Transcriptional and Translational Machinery

    OpenAIRE

    Thiele, Ines; Fleming, Ronan M. T.; Bordbar, Aarash; Schellenberger, Jan; Palsson, Bernhard Ø.

    2010-01-01

    The constraint-based reconstruction and analysis approach has recently been extended to describe Escherichia coli's transcriptional and translational machinery. Here, we introduce the concept of reaction coupling to represent the dependency between protein synthesis and utilization. These coupling constraints lead to a significant contraction of the feasible set of steady-state fluxes. The subset of alternate optimal solutions (AOS) consistent with maximal ribosome production was calculated. ...

  8. TECHNICAL AND INSTITUTIONAL ISSUES OF AN INTELLIGENCE COMPETITIVE SYSTEM FOR WOODWORKING MACHINERY INDUSTRY

    OpenAIRE

    Ruth M. Hofmann; Victor Pelaez; Marcelo F. Melo; Dayani C. Aquino

    2008-01-01

    This paper presents a competitive intelligence system developed for the entrepreneurs of the Brazilian woodworking machinery industry. The system, called MaqMad, was designed as a tool to support the enterprise decision-making and gathers information on the competitive and technological environment of the industry. The architecture of the system allows customizing the access to the information available concerning the particularities of each user. Unlike the original conceptions of IC, eminen...

  9. From DNA to proteins via the ribosome: Structural insights into the workings of the translation machinery

    OpenAIRE

    Agirrezabala Xabier; Frank Joachim

    2010-01-01

    Abstract Understanding protein synthesis in bacteria and humans is important for understanding the origin of many human diseases and devising treatments for them. Over the past decade, the field of structural biology has made significant advances in the visualisation of the molecular machinery involved in protein synthesis. It is now possible to discern, at least in outline, the way that interlocking ribosomal components and factors adapt their conformations throughout this process. The deter...

  10. Harnessing heterologous and endogenous CRISPR-Cas machineries for efficient markerless genome editing in Clostridium

    OpenAIRE

    Pyne, Michael E.; Mark R. Bruder; Murray Moo-Young; Chung, Duane A; C. Perry Chou

    2016-01-01

    Application of CRISPR-Cas9 systems has revolutionized genome editing across all domains of life. Here we report implementation of the heterologous Type II CRISPR-Cas9 system in Clostridium pasteurianum for markerless genome editing. Since 74% of species harbor CRISPR-Cas loci in Clostridium, we also explored the prospect of co-opting host-encoded CRISPR-Cas machinery for genome editing. Motivation for this work was bolstered from the observation that plasmids expressing heterologous cas9 resu...

  11. Status and Trend of Pipeline Construction Machinery and Equipment in China

    Institute of Scientific and Technical Information of China (English)

    Li Jinwu; Wang Wei

    1996-01-01

    @@ Current Situation Currently, tools and equipment used for pipeline construction are basically as follows: Welding equipment and auxiliary welding equipment Welding equipment Semi-automatic welding equipment and welding technology based on the Lincoln welding machinery have been developed in recent years and are conducive to reduce labor intensity, increase efficiency and welding quality.The skid-mounted movable welding equipment is independently developed by ourselves.

  12. Estimating Boiler and Machinery Maximum Probable Yearly Aggregate Loss Using a Microcomputer Spreadsheet Simulation

    OpenAIRE

    Ramon H. Venegas; Emanuel Melachrinoudis

    1994-01-01

    In this study we present a framework and methods to estimate the Boiler and Machinery pure premium distribution and maximum probable yearly aggregate loss amount (MOY) for a hypothetical electric power plant. We use the collective risk theory formulation and combine actual severity data from electric power plants with published object failure rates to generate the pure premium distribution. We obtain our results using a microcomputer spreadsheet simulation and compare them to results obtained...

  13. Research on Approximate Calculation of Preventive Maintenance Period in Machinery Systems under Random Distribution

    Institute of Scientific and Technical Information of China (English)

    WU Bo; CHEN Gang; JIANG Zhengfeng; ZHENG Junyi

    2006-01-01

    Approximate calculation methods of prevention maintenance period under the random distribution are given, and three kinds of approximate calculation models of prevention maintenance period based on different security demands are come up with according to maintenance problems of machinery systems in modern enterprise and starting with different demands of systems. And then, how to make certain the best maintenance period by using the approximate calculation methods is illustrated by an example.

  14. Pink1 regulates mitochondrial dynamics through interaction with the fission/fusion machinery

    OpenAIRE

    Yang, Yufeng; Ouyang, Yingshi; Yang, Lichuan; Beal, M. Flint; McQuibban, Angus; Vogel, Hannes; Lu, Bingwei

    2008-01-01

    Mitochondria form dynamic tubular networks that undergo frequent morphological changes through fission and fusion, the imbalance of which can affect cell survival in general and impact synaptic transmission and plasticity in neurons in particular. Some core components of the mitochondrial fission/fusion machinery, including the dynamin-like GTPases Drp1, Mitofusin, Opa1, and the Drp1-interacting protein Fis1, have been identified. How the fission and fusion processes are regulated under norma...

  15. Competition between Pre-mRNAs for the splicing machinery drives global regulation of splicing

    OpenAIRE

    Munding, EM; Shiue, L; Katzman, S.; Donohue, J; Ares, M

    2013-01-01

    During meiosis in yeast, global splicing efficiency increases and then decreases. Here we provide evidence that splicing improves due to reduced competition for the splicing machinery. The timing of this regulation corresponds to repression and reactivation of ribosomal protein genes (RPGs) during meiosis. In vegetative cells, RPG repression by rapamycin treatment also increases splicing efficiency. Downregulation of the RPG-dedicated transcription factor gene IFH1 genetically suppresses two ...

  16. Operation of tube electric heaters in a medium of oil coolants of chemical purification machinery

    Energy Technology Data Exchange (ETDEWEB)

    Bolgov, I.V.; Barinov, V.V.; Isakov, B.V.; Skatkov, V.D.

    1979-01-01

    The basic factors which cause failure of tube electric heaters of chemical purification machinery which operate on electrical heating are pointed out. It is shown that the material of the envelope of the tube electric heater noticeably influences aging of the oil coolant. It is established that at a thickness of solid deposits on the surface of the tube electric heater greater than 3-4 mm the spiral overheats and the envelope burns through.

  17. The cultivated agricultural environment

    International Nuclear Information System (INIS)

    Local agricultural practices in the Nordic countries have resulted in a great diversity in agriculture in the Nordic countries. The diversities mean that in the event of contamination of agricultural land by radioactive fallout the consequences may differ greatly from region to region. For crops and soils contaminated directly by radioactive fallout there are five primary causes for concern, namely: 1. short-term internal contamination of man and animals through ingestion of surface-contaminated mature crops; 2. internal contamination of crops through foliar intake; 3. contamination of mature crops from resuspended soil; 4. direct irradiation of agricultural workers; 5. internal irradiation from inhalation of resuspended soil particulates. In the short-term, most of the radionuclides likely to be released to the atmosphere in the event of an accident have a potential to cause problems in agriculture and many have the potential for causing long-term problems. Generally, the magnitude of the problems created will depend on the: deposition mechanism (wet or dry); radionuclide composition of the fallout; type of farming system (i.e. arable or dairy); type of soil (for instance organic soils are more sensitive than mineral soils with respect to radiocaesium); state of development of the crop which in turn is determined by the season of the year. (EG)

  18. Harnessing heterologous and endogenous CRISPR-Cas machineries for efficient markerless genome editing in Clostridium.

    Science.gov (United States)

    Pyne, Michael E; Bruder, Mark R; Moo-Young, Murray; Chung, Duane A; Chou, C Perry

    2016-01-01

    Application of CRISPR-Cas9 systems has revolutionized genome editing across all domains of life. Here we report implementation of the heterologous Type II CRISPR-Cas9 system in Clostridium pasteurianum for markerless genome editing. Since 74% of species harbor CRISPR-Cas loci in Clostridium, we also explored the prospect of co-opting host-encoded CRISPR-Cas machinery for genome editing. Motivation for this work was bolstered from the observation that plasmids expressing heterologous cas9 result in poor transformation of Clostridium. To address this barrier and establish proof-of-concept, we focus on characterization and exploitation of the C. pasteurianum Type I-B CRISPR-Cas system. In silico spacer analysis and in vivo interference assays revealed three protospacer adjacent motif (PAM) sequences required for site-specific nucleolytic attack. Introduction of a synthetic CRISPR array and cpaAIR gene deletion template yielded an editing efficiency of 100%. In contrast, the heterologous Type II CRISPR-Cas9 system generated only 25% of the total yield of edited cells, suggesting that native machinery provides a superior foundation for genome editing by precluding expression of cas9 in trans. To broaden our approach, we also identified putative PAM sequences in three key species of Clostridium. This is the first report of genome editing through harnessing native CRISPR-Cas machinery in Clostridium. PMID:27157668

  19. Conceptual design and analysis of roads and road construction machinery for initial lunar base operations

    Science.gov (United States)

    Sines, Jeffrey L.; Banks, Joel; Efatpenah, Keyanoush

    1990-01-01

    Recent developments have made it possible for scientists and engineers to consider returning to the Moon to build a manned lunar base. The base can be used to conduct scientific research, develop new space technology, and utilize the natural resources of the Moon. Areas of the base will be separated, connected by a system of roads that reduce the power requirements of vehicles traveling on them. Feasible road types for the lunar surface were analyzed and a road construction system was designed for initial lunar base operations. A model was also constructed to show the system configuration and key operating features. The alternate designs for the lunar road construction system were developed in four stages: analyze and select a road type; determine operations and machinery needed to produce the road; develop machinery configurations; and develop alternates for several machine components. A compacted lunar soil road was selected for initial lunar base operations. The only machinery required to produce this road were a grader and a compactor. The road construction system consists of a main drive unit which is used for propulsion, a detachable grader assembly, and a towed compactor.

  20. Chemiluminescence imaging for microRNA detection based on cascade exponential isothermal amplification machinery.

    Science.gov (United States)

    Xu, Yongjie; Li, Dandan; Cheng, Wei; Hu, Rong; Sang, Ye; Yin, Yibing; Ding, Shijia; Ju, Huangxian

    2016-09-14

    A novel G-quadruplex DNAzyme-driven chemiluminescence (CL) imaging method was developed for ultrasensitive and specific detection of miRNA based on the cascade exponential isothermal amplification reaction (EXPAR) machinery. A structurally tailored hairpin probe switch was designed to selectively recognise miRNA and form hybridisation products to trigger polymerase and nicking enzyme machinery, resulting in the generation of product I, which was complementary to a region of the functional linear template. Then, the response of the functional linear template to the generated product I further activated the exponential isothermal amplification machinery, leading to synthesis of numerous horseradish peroxidase mimicking DNAzyme units for CL signal transduction. The amplification paradigm generated a linear response from 10 fM to 100 pM, with a low detection limit of 2.91 fM, and enabled discrimination of target miRNA from a single-base mismatched target. The developed biosensing platform demonstrated the advantages of isothermal, homogeneous, visual detection for miRNA assays, offering a promising tool for clinical diagnosis. PMID:27566360

  1. The Place of RNA in the Origin and Early Evolution of the Genetic Machinery

    Directory of Open Access Journals (Sweden)

    Günter Wächtershäuser

    2014-12-01

    Full Text Available The extant genetic machinery revolves around three interrelated polymers: RNA, DNA and proteins. Two evolutionary views approach this vital connection from opposite perspectives. The RNA World theory posits that life began in a cold prebiotic broth of monomers with the de novo emergence of replicating RNA as functionally self-contained polymer and that subsequent evolution is characterized by RNA → DNA memory takeover and ribozyme → enzyme catalyst takeover. The FeS World theory posits that life began as an autotrophic metabolism in hot volcanic-hydrothermal fluids and evolved with organic products turning into ligands for transition metal catalysts thereby eliciting feedback and feed-forward effects. In this latter context it is posited that the three polymers of the genetic machinery essentially coevolved from monomers through oligomers to polymers, operating functionally first as ligands for ligand-accelerated transition metal catalysis with later addition of base stacking and base pairing, whereby the functional dichotomy between hereditary DNA with stability on geologic time scales and transient, catalytic RNA with stability on metabolic time scales existed since the dawn of the genetic machinery. Both approaches are assessed comparatively for chemical soundness.

  2. The adaptive response of lichens to mercury exposure involves changes in the photosynthetic machinery

    International Nuclear Information System (INIS)

    Lichens are an excellent model to study the bioaccumulation of heavy metals but limited information is available on the molecular mechanisms occurring during bioaccumulation. We investigated the changes of the lichen proteome during exposure to constant concentrations of mercury. We found that most of changes involves proteins of the photosynthetic pathway, such as the chloroplastic photosystem I reaction center subunit II, the oxygen-evolving protein and the chloroplastic ATP synthase β-subunit. This suggests that photosynthesis is a target of the toxic effects of mercury. These findings are also supported by changes in the content of photosynthetic pigments (chlorophyll a and b, and β-carotene). Alterations to the photosynthetic machinery also reflect on the structure of thylakoid membranes of algal cells. Response of lichens to mercury also involves stress-related proteins (such as Hsp70) but not cytoskeletal proteins. Results suggest that lichens adapt to mercury exposure by changing the metabolic production of energy. - Highlights: ► Lichens exposed to Hg° vapors accumulate this metal irreversibly. ► Hg° interferes with physiological processes of the epiphytic lichen Evernia prunastri. ► Hg° promotes changes in the concentration of photosynthetic pigments. ► Hg° treatment causes changes in the ultrastructure of the photobiont plastids. ► Hg° induces changes in the protein machinery involved in the photosynthesis pathway. - Mercury affects the photosynthetic protein machinery of lichens.

  3. DEVELOPMENT OF VIRTUAL INSTRUMENT IN CHARACTERISTIC ANALYSIS OF ROTATING MACHINERY BASED ON INSTANTANEOUS FREQUENCY ESTIMATION

    Institute of Scientific and Technical Information of China (English)

    Yang Jiongming; Qin Shuren; Ji Zhong; Guo Yu

    2004-01-01

    Based on the recently quick-developing time-frequency analysis (TFA) technique and virtual instrument (VI) technique, a virtual instrument in characteristic analysis of rotating machinery is researched and developed successfully. By utilizing instantaneous frequency estimation (IFE) theoretics of TFA technique, and based on IFE of peak searching on the time-frequency spectrum, order analysis (OA) functions is put forward and implemented, such as order spectrum, order spectrum matrix, order tracking, order tracking filtering, and order component extraction, etc. Unlike the home and abroad existing popular characteristic analyzers, which need key phasing devices such as shaft encoder, phase-locked loop (PLL), phase-locked multiple frequency, tachometer, etc, to implement constant angle sampling directly or indirectly, whereas this instrument only uses the vibration signal of rotating machinery to carry out OA. This instrument makes up the shortage of these traditional instruments in analyzing the non-stationary signal of run-up and run-down process of rotating machinery. Therefore, it is a great breakthrough for the existing order analyzers.

  4. Production paths – an innovative concept for heavy machinery production planning and control

    Directory of Open Access Journals (Sweden)

    R. Lenort

    2014-01-01

    Full Text Available The paper introduces a new concept for planning and control of complicated heavy machinery production which is based on the principle of „production paths“ – production paths planning and control concept. The concept reflects the limited applicability of traditional concepts and systems for production planning and control in conditions of heavy machinery industry that is specific by the limited repeatability of product structures and volumes, by complicated and variant material flows and unbalanced capacity utilisation. The production path represents a production capacity reserved by time or a space and is determined for the realisation of products with the same level of production repeatability. The given principle enables categorisation of the complicated production to „fast“ and „slow“ production paths. The fast production path is designed for processing of products specific either by a mass or series production type. The slow path, on the other hand, is designed for the resources reserved for a production of few series or single-pieces. The proposed concept significantly reduces difficulties of heavy machinery production planning and control. It cuts work in process inventory and improves the material flow continuousness, the balance and utilisation of production resources as well as the whole production process. The benefits from the implementation of the production paths concept are verified on the forged pieces machining process.

  5. Fault diagnosis of rotating machinery using an improved HHT based on EEMD and sensitive IMFs

    Science.gov (United States)

    Lei, Yaguo; Zuo, Ming J.

    2009-12-01

    A Hilbert-Huang transform (HHT) is a time-frequency technique and has been widely applied to analyzing vibration signals in the field of fault diagnosis of rotating machinery. It analyzes the vibration signals using intrinsic mode functions (IMFs) extracted using empirical mode decomposition (EMD). However, EMD sometimes cannot reveal the signal characteristics accurately because of the problem of mode mixing. Ensemble empirical mode decomposition (EEMD) was developed recently to alleviate this problem. The IMFs generated by EEMD have different sensitivity to faults. Some IMFs are sensitive and closely related to the faults but others are irrelevant. To enhance the accuracy of the HHT in fault diagnosis of rotating machinery, an improved HHT based on EEMD and sensitive IMFs is proposed in this paper. Simulated signals demonstrate the effectiveness of the improved HHT in diagnosing the faults of rotating machinery. Finally, the improved HHT is applied to diagnosing an early rub-impact fault of a heavy oil catalytic cracking machine set, and the application results prove that the improved HHT is superior to the HHT based on all IMFs of EMD.

  6. Extracting repetitive transients for rotating machinery diagnosis using multiscale clustered grey infogram

    Science.gov (United States)

    Li, Chuan; Cabrera, Diego; de Oliveira, José Valente; Sanchez, René-Vinicio; Cerrada, Mariela; Zurita, Grover

    2016-08-01

    Local faults of rotating machinery usually result in repetitive transients whose impulsiveness or cyclostationarity can be employed as faulty signatures. However, to simultaneously accommodate the impulsiveness and the cyclostationarity is a challenging task for rotating machinery diagnostics. Inspired by recently-reported infogram that is sensitive to either the impulsiveness or the cyclostationarity using spectral negentropy defined in time domain or frequency domain, a multiscale clustering grey infogram (MCGI) is proposed by combining both negentropies in a grey fashion using multiscale clustering. Fourier spectrum of the vibration signal is decomposed into multiple scales with different initial resolutions. In each scale, fine segments are grouped using hierarchical clustering. Meanwhile, both time-domain and frequency-domain spectral negentropies are taken into account to guide the clustering through grey evaluation of both negentropies. Numerical simulations and experimental tests are carried out for validating the proposed MCGI. For comparison, peer methods are applied to challenge different noises and interferences. The results show that, thanks to the multiscale clustering of the spectrum and the grey evaluation of both negentropies, the present MCGI is robust in extracting the repetitive transients for the rotating machinery diagnosis.

  7. Alpha-latrotoxin modulates the secretory machinery via receptor-mediated activation of protein kinase C.

    Science.gov (United States)

    Liu, Jie; Wan, Qunfang; Lin, Xianguang; Zhu, Hongliang; Volynski, Kirill; Ushkaryov, Yuri; Xu, Tao

    2005-09-01

    The hypothesis whether alpha-latrotoxin (LTX) could directly regulate the secretory machinery was tested in pancreatic beta cells using combined techniques of membrane capacitance (Cm) measurement and Ca2+ uncaging. Employing ramp increase in [Ca2+]i to stimulate exocytosis, we found that LTX lowers the Ca2+ threshold required for exocytosis without affecting the size of the readily releasable pool (RRP). The burst component of exocytosis in response to step-like [Ca2+]i increase generated by flash photolysis of caged Ca2+ was also speeded up by LTX treatment. LTX increased the maximum rate of exocytosis compared with control responses with similar postflash [Ca2+]i and shifted the Ca2+ dependence of the exocytotic machinery toward lower Ca2+ concentrations. LTXN4C, a LTX mutant which cannot form membrane pores or penetrate through the plasma membrane but has similar affinity for the receptors as the wild-type LTX, mimicked the effect of LTX. Moreover, the effects of both LTX and LTXN4C) were independent of intracellular or extracellular Ca2+ but required extracellular Mg2+. Our data propose that LTX, by binding to the membrane receptors, sensitizes the fusion machinery to Ca2+ and, hence, may permit release at low [Ca2+]i level. This sensitization is mediated by activation of protein kinase C. PMID:16101679

  8. Time-frequency manifold for nonlinear feature extraction in machinery fault diagnosis

    Science.gov (United States)

    He, Qingbo

    2013-02-01

    Time-frequency feature is beneficial to representation of non-stationary signals for effective machinery fault diagnosis. The time-frequency distribution (TFD) is a major tool to reveal the synthetic time-frequency pattern. However, the TFD will also face noise corruption and dimensionality reduction issues in engineering applications. This paper proposes a novel nonlinear time-frequency feature based on a time-frequency manifold (TFM) technique. The new TFM feature is generated by mainly addressing manifold learning on the TFDs in a reconstructed phase space. It combines the non-stationary information and the nonlinear information of analyzed signals, and hence exhibits valuable properties. Specifically, the new feature is a quantitative low-dimensional representation, and reveals the intrinsic time-frequency pattern related to machinery health, which can effectively overcome the effects of noise and condition variance issues in sampling signals. The effectiveness and the merits of the proposed TFM feature are confirmed by case study on gear wear diagnosis, bearing defect identification and defect severity evaluation. Results show the value and potential of the new feature in machinery fault pattern representation and classification.

  9. THE ECOLOGICAL AGRICULTURE – A MODEL OF DURABLE AGRICULTURE

    OpenAIRE

    TABITA CORNELIA ADAMOV; T. IANCU; ANDREA NAGY; COSMINA-SIMONA TOADER

    2013-01-01

    In the context of the community agriculture politics orientation toward a natural agriculture, where the concept of ecological agriculture has a very well defined place, it is necessary to intensify the efforts to promote the ecological agriculture practices and to inform the farmers about the importance and the role of the ecological technologies and, last but not least, the economical advantages and also the advantages to improve the environment. The ecological agriculture (similar term for...

  10. Agricultural land evaluation in the process of agricultural land consolidation

    OpenAIRE

    Fištravec, Polonca

    2008-01-01

    Agricultural land is limited and therefore needs to be protected, preserved and adequately managed. One of the most important instruments of rural planning as well as agricultural land planning represent agricultural operations, first of all the process of land consolidation. Diploma thesis deals with the process of agricultural land consolidation as a whole, emphasizing the agricultural land evaluation during the process. This is cruicial for just and efficient dealings of the...

  11. Data mining in agriculture

    CERN Document Server

    Mucherino, Antonio; Pardalos, Panos M

    2009-01-01

    Data Mining in Agriculture represents a comprehensive effort to provide graduate students and researchers with an analytical text on data mining techniques applied to agriculture and environmental related fields. This book presents both theoretical and practical insights with a focus on presenting the context of each data mining technique rather intuitively with ample concrete examples represented graphically and with algorithms written in MATLAB®. Examples and exercises with solutions are provided at the end of each chapter to facilitate the comprehension of the material. For each data mining technique described in the book variants and improvements of the basic algorithm are also given. Also by P.J. Papajorgji and P.M. Pardalos: Advances in Modeling Agricultural Systems, 'Springer Optimization and its Applications' vol. 25, ©2009.

  12. Measuring Agricultural Bias

    DEFF Research Database (Denmark)

    Jensen, Henning Tarp; Robinson, Sherman; Tarp, Finn

    The measurement issue is the key issue in the literature on trade policy-induced agri-cultural price incentive bias. This paper introduces a general equilibrium effective rate of protection (GE-ERP) measure, which extends and generalizes earlier partial equilibrium nominal protection measures....... For the 15 sample countries, the results indicate that the agricultural price incentive bias, which was generally perceived to exist during the 1980s, was largely eliminated during the 1990s. The results also demonstrate that general equilibrium effects and country-specific characteristics - including trade...... shares and intersectoral linkages - are crucial for determining the sign and magnitude of trade policy bias. The GE-ERP measure is therefore uniquely suited to capture the full impact of trade policies on agricultural price incentives. A Monte Carlo procedure confirms that the results are robust...

  13. AGRICULTURAL ECONOMICS, INTERDEPENDENCE AND UNCERTAINTY

    OpenAIRE

    Anderson, Jock R.

    1982-01-01

    Interdependence has always been central to economics but assumes pressing importance for agricultural economists as they deal with industrialising agricultures. Continued unresolvable uncertainties, when properly recognised, also add to the challenge of relevant work in agricultural economics. The related roles of interdependence and uncertainty are illustrated through examples from the progress of agricultural technology and enhancement of food security.

  14. Soil physics and agriculture

    International Nuclear Information System (INIS)

    The approach that integrates knowledge is very important in Agriculture, including farmers, extensionists, researchers and professors. The specialists, including the soil physicists, must have a global view of the crop production system. Therefore, their expertise can be useful for the society. The Essence of scientific knowledge is its practical application. The soil physics is a sub area of Agronomy. There are many examples of this specific subject related to Agriculture. This paper will focus, in general, the following cases: (i) erosion, environmental pollution and human health, (ii) plant population and distribution, soil fertility, evapo-transpiration and soil water flux density, and (iii) productivity, effective root depth, water deficit and yield

  15. Changing Structure of Turkish Agriculture

    OpenAIRE

    Mann, Charles K.

    1983-01-01

    Professor Resat Aktan, whose memory is honoured by this paper, occupied a unique place in the history of Turkish agriculture--teacher, scholar, Minister of Agriculture, and long-time Turkish delegate to the IAAE. Among his many accomplishments, he led two landmark agricultural surveys which serve to chronicle the development of modern Turkish agriculture. While Ataturk had set Turkey on the road to modernization of agriculture, the end of World War II still found Turkish wheat farming little ...

  16. Strategic analysis of Swedish agriculture

    OpenAIRE

    Fogelfors, Håkan; Wivstad, Maria; Eckersten, Henrik; Holstein, Fredrik; Johansson, Susanne; Verwijst, Theo

    2009-01-01

    This strategic analysis of Swedish agriculture – production systems and agricultural landscapes in a time of change – focuses on climate change, future availability of natural resources and economic regulation in a global food market. The background to the project was that the Faculty of Natural Resources and Agriculture of the Swedish University of Agricultural Sciences identified an urgent need to explore the implications and opportunities of coming changes for agricultural production syste...

  17. Agricultural Technology, Risk, and Gender

    DEFF Research Database (Denmark)

    Arndt, Channing; Tarp, Finn

    2000-01-01

    Interactions between agricultural technology improvements, risk-reducing behavior, and gender roles in agricultural production in Mozambique are examined. The analysis employs a computable general equilibrium (CGE) model that explicitly incorporates key features of the economy. These include......: detailed accounting of marketing margins, home consumption, risk, and gender roles in agricultural production. Our results show that agricultural technology improvements benefit both male and female occupants of rural households. Due to economic interactions, agricultural technology improvements...

  18. Cohabitation: Humans & Agriculture

    NARCIS (Netherlands)

    Woodington, W.

    2012-01-01

    This "designers' manual" is made during the TIDO-course AR0531 Smart & Bioclimatic Design. Cohabitation of humans and agriculture can be used to improve building climate, human health and the state of the world. It affects building design and requires new building components. This manual explains w

  19. Knowing Agricultural Biodiversity

    OpenAIRE

    Mulvany, P.

    2001-01-01

    The term "agricultural biodiversity" is relatively recent, perhaps post-CBD. Although, the specific nature of the biodiversity used by people was recognised for a long time, the overwhelming emphasis in the CBD was on general biodiversity, mainly 'wild' flora and fauna that inhabit this fragile biosphere in which people also live.

  20. Agriculture. Sheep Livestock.

    Science.gov (United States)

    Michigan State Univ., East Lansing. Coll. of Agriculture and Natural Resources Education Inst.

    This task-based curriculum guide for agricultural production, specifically for sheep, is intended to help the teacher develop a classroom management system where students learn by doing. Introductory materials include a Dictionary of Occupational Titles job code and title sheet, a task sheet for developing leadership skills, and a task list. Each…