WorldWideScience

Sample records for agreement crada final

  1. Agreement Execution Process Study: CRADAs and NF-WFO Agreements and the Speed of Business

    Energy Technology Data Exchange (ETDEWEB)

    Harrer, Bruce J.; Cejka, Cheryl L.; Macklin, Richard; Miksovic, Ann

    2011-02-01

    This report summarizes the findings of a study on the execution of Cooperative Research and Development Agreements (CRADAs) and Non-Federal Work for Others (NF-WFO) agreements across the U.S. Department of Energy (DOE) laboratory complex. The study provides quantitiative estimates of times required to negotiate and execute these agreements across the DOE complex. It identifies factors impacting on cycle times and describes best practicies used at various laboratories and site offices that reduce cycle times.

  2. Composite material fabrication techniques. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Frame, B J; Paulauskas, F L [Oak Ridge National Lab., TN (United States); Miller, J; Parzych, W [Metters Industries, Inc. (United States)

    1996-09-30

    This report describes a low cost method of fabricating components for mockups and training simulators used in the transportation industry. This technology was developed jointly by the Oak Ridge National Laboratory (ORNL) and Metters Industries, Incorporated (MI) as part of a Cooperative Research and Development Agreement (CRADA) ORNL94-0288 sponsored by the Department of Energy (DOE) Office of Economic Impace and Diversity Minority Business Technology Transfer Consortium. The technology involves fabricating component replicas from fiberglass/epoxy composites using a resin transfer molding (RTM) process. The original components are used as masters to fabricate the molds. The molding process yields parts that duplicate the significant dimensional requirements of the original component while still parts that duplicate the significant dimensional requirements of the original component while still providing adequate strength and stiffness for use in training simulators. This technology permits MI to overcome an acute shortage in surplus military hardware available to them for use in manufacturing training simulators. In addition, the cost of the molded fiberglass components is expected to be less than that of procuring the original components from the military.

  3. Proximity sensor system development. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Haley, D.C. [Oak Ridge National Lab., TN (United States); Pigoski, T.M. [Merrit Systems, Inc. (United States)

    1998-01-01

    Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors.

  4. Cooperative Research and Development Agreement (CRADA) Opportunities from NIH

    Data.gov (United States)

    U.S. Department of Health & Human Services — This RSS Feed represents all Collaborative Research and Development (CRADA) opportunities available from the National Institutes of Health (NIH).The intent of...

  5. Rapid response manufacturing (RRM). Final CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1998-02-10

    US industry is fighting to maintain its competitive edge in the global market place. Markets fluctuate rapidly. Companies have to be able to respond quickly with improved, high quality, cost efficient products. Because companies and their suppliers are geographically distributed, rapid product realization is dependent on the development of a secure integrated concurrent engineering environment operating across multiple business entities. The way products are developed and brought to market can be improved and made more efficient through the proper incorporation of emerging technologies implemented in a secure environment. This documents the work done under this CRADA to develop capabilities, which permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process. Lockheed Martin Energy Systems (LMES), through a CRADA with the National Center for Manufacturing Sciences (NCMS), worked within a consortium of major industrial firms--Ford, General Motors, Texas Instruments, United Technologies, and Eastman Kodak--and several small suppliers of advanced manufacturing technology--MacNeal-Schwendler Corp., Teknowledge Corp., Cimplex Corp., Concentra, Spatial Technology, and Structural Dynamics Research Corp. (SDRC)--to create infrastructure to support the development and implementation of secure engineering environments for Rapid Response Manufacturing. The major accomplishment achieved under this CRADA was the demonstration of a prototypical implementation of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined parts in a secure NWC compliant environment. Specifically, methods needed to permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process were developed and demonstrated. An important aspect of this demonstration was

  6. Development of superconducting transmission cable. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Hawsey, R.; Stovall, J.P. [Oak Ridge National Lab., TN (United States); Hughey, R.L.; Sinha, U.K. [Southwire Co., Carrollton, GA (United States)

    1997-10-01

    The purpose of this Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and Southwire Company is to develop the technology necessary to proceed to commercialization of high-temperature superconducting (HTS) transmission cables. Power transmission cables are a promising near-term electric utility application for high-temperature superconductivity. Present HTS wires match the needs for a three-phase transmission cable: (1) the wires must conduct high currents in self-field, (2) there are no high forces developed, and (3) the cables may operate at relatively low current density. The commercially-available HTS wires, in 100-m lengths, make construction of a full three-phase, alternating current (ac) transmission cable possible. If completed through the pre-commercialization phase, this project will result in a new capability for electric power companies. The superconducting cable will enable delivery with greater efficiency, higher power density, and lower costs than many alternatives now on the market. Job creation in the US is expected as US manufacturers supply transmission cables to the expanding markets in Asia and to the densely populated European cities where pipe-type cable is prevalent. Finally, superconducting cables may enable delivery of the new, diverse and distributed sources of electricity that will constitute the majority of new installed electrical generation in the world during the coming decades.

  7. Final Report for CRADA No. 97-F001

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory; The Foster Wheeler Development Corporation

    2000-10-31

    This report documents the results of work conducted under the Cooperative Research And Development (CRADA) No. 97-F001 between the Foster Wheeler Development Corporation, FWDC, and the National Energy Technology Laboratory, NETL. Under this agreement, FWDC and NETL worked together to further investigate the applicability of the MFIX computer code to FWDC engineering problems. MFIX is a transient, finite difference, FORTRAN code that solves the equations of transport for interacting fluid and granular solid phases. It is designed to model fluidized bed reactors. Under the CRADA, work was divided into three tasks. The first task involved the continued validation of the hydrodynamic and chemistry capabilities of the MFIX code. The second task involved a parametric evaluation of the MFIX code's ability to predict bubble shape. Task 3 was to modify MFIX to make it execute faster and more easily on personal computers. Task 1 was accomplished by both FWDC and NETL while Tasks 2 and 3 were completed primarily by NETL. Non technical details of the CRADA can be found in Appendix A.

  8. Bioremediation of PCBs. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Klasson, K.T. [Oak Ridge National Lab., TN (United States). Chemical Technology Div., TN (United States); Abramowicz, D.A. [General Electric Co. Corporate Research and Development, Niskayuna, NY (United States)

    1996-06-01

    The Cooperative Research and Development Agreement was signed between Oak Ridge National Laboratory (ORNL) and General Electric Company (GE) on August 12, 1991. The objective was a collaborative venture between researchers at GE and ORNL to develop bioremediation of polychlorinated biphenyls (PCBs). The work was conducted over three years, and this report summarizes ORNL`s effort. It was found that the total concentration of PCBs decreased by 70% for sequential anaerobic-aerobic treatment compared with a 67% decrease for aerobic treatment alone. The sequential treatment resulted in PCB products with fewer chlorines and shorter halflives in humans compared with either anaerobic or aerobic treatment alone. The study was expected to lead to a technology applicable to a field experiment that would be performed on a DOE contaminated site.

  9. [Technical assistance to Georgia industries]. Final CRADA report for CRADA Number Y-1293-0230

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, A.A.

    1997-03-14

    The purpose of this CRADA was to provide a mechanism whereby private sector companies within the State of Georgia could access the vast technological resources available at the Lockheed Martin Energy Systems, Inc., facilities in oak Ridge, Tennessee. This assistance was focused on assisting companies within the State to become more globally competitive. The Georgia Tech Research Corporation and Lockheed Martin Energy Systems, Inc., (LMES), provided companies within the state of Georgia up to four days of technical assistance at no charge. As a result of those interactions, there has been an economic impact of $5.1 million dollars reported over the life of the CRADA. This report contains a review of the objectives of this CRADA, and the status of each objective. It also contains information on how the work performed under this CRADA benefited the sponsor in pursuing its mission. Details of private sector impact and how it was measured and collected are discussed.

  10. [Technical assistance to North Carolina industries]. Final CRADA report for CRADA Number Y-1293-0231

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, A.A.

    1997-03-14

    The purpose of this CRADA was to provide a mechanism whereby private sector companies within the State of North Carolina could access the vast technological resources available at the Lockheed Martin Energy Systems, Inc., facilities in Oak Ridge, Tennessee. This assistance was focused on assisting companies within the State to become more globally competitive. The North Carolina State University Industrial Extension Service and Lockheed Martin Energy Systems, Inc., (LMES), provided companies within the state of North Carolina up to four days of technical assistance at no charge. As a result of those interactions, there has been an economic impact of $4.2 million dollars reported over the life of the CRADA. This report contains a review of the objectives of this CRADA, and the status of each objectives. It also contains information on how the work performed under this CRADA benefited the sponsor in pursuing its mission. Details of private sector impact and how it was measured and collected are discussed.

  11. Final Report for CRADA Agreement , AL-C-2006-01 with Microsens Biotechnologies: Detection of the Abnormal Prion Protein in Blood by Improving the Extraction of this Protein

    Energy Technology Data Exchange (ETDEWEB)

    Schmerr, Mary Jo

    2009-03-31

    Several conditions were examined to optimize the extraction protocol using Seprion beads for the abnormal prion protein. Different combinations of water, hexafluro-2-propanol and formic acid were used. The results of these extraction protocols showed that the magnetic beads coated with Seprion reagents were subject to degradation, themselves, when the extraction conditions that would solubilize the abnormal prion protein were used. These compounds caused interference in the immunoassay for the abnormal prion protein and rendered these protocols incompatible with the assay systems. In an attempt to overcome this problem, another approach was then used. The coated beads were used as an integral part of the assay platform. After washing away denaturing agents, the beads with the 'captured' abnormal prion were incubated directly in the immunoassay, followed by analysis by the capillary electrophoresis. When a capillary electrophoresis electro-kinetic separation was attempted, the beads disturbed the analysis making it impossible to interpret. A pressure separation method was then developed for capillary electrophoresis analysis. When 20 samples, 5 of which were positive were analyzed, the assay identified 4 of the 5 positives and had no false positives. When a larger number of samples were analyzed the results were not as good - there were false positives and false negatives. It was then observed that the amount of beads that were loaded was dependent upon how long the beads were allowed to settle before loading them into the capillary. This resulted in unacceptable variations in the results and explained that when large numbers of samples were evaluated the results were not consistent. Because the technical difficulties with using the Seprion beads could not be overcome at this time, another approach is underway that is outside of the scope of this CRADA. No further agreements have been developed. Because the results were not favorable, no manuscripts were

  12. [Technical assistance to Tennessee industries]. Final CRADA report for CRADA Number Y-1294-0294

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, A.A.

    1997-03-14

    The purpose of this CRADA was to provide a mechanism whereby private sector companies within the State of Tennessee could access the vast technological resources available at the Lockheed Martin Energy Systems, Inc., facilities in Oak Ridge, Tennessee. This assistance was focused on assisting companies within the State to become more globally competitive. The State of Tennessee Department of Economic and Community Development through the University of Tennessee Center for Industrial Services and Lockheed Martin Energy Systems, Inc., (LMES), provided companies within the state of Tennessee up to four days of technical assistance at no charge. As a result of those interactions, there has been an economic impact of $19.2 million dollars reported over the life of the CRADA. This report contains a review of the objectives of this CRADA, and the status of each objective. It also contains information on how the work performed under this CRADA benefited the sponsor in pursuing its mission. Details of private sector impact and how it was measured and collected are discussed.

  13. Development of Charge Drain Coatings: Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Elam, Jeffrey W. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-17

    The primary goal of this CRADA project was to develop and optimize tunable resistive coatings prepared by atomic layer deposition (ALD) for use as charge-drain coatings on the KLA-Tencor digital pattern generators (DPGs).

  14. Accelerated deployment of nanostructured hydrotreating catalysts. Final CRADA Report.

    Energy Technology Data Exchange (ETDEWEB)

    Libera, J.A.; Snyder, S.W.; Mane, A.; Elam, J.W.; Cronauer, D.C.; Muntean, J.A.; Wu, T.; Miller, J.T. (Chemical Sciences and Engineering Division); ( ES)

    2012-08-27

    Nanomanufacturing offers an opportunity to create domestic jobs and facilitate economic growth. In response to this need, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy issued a Research Call to develop nanomanufacturing capabilities at the National Laboratories. High performance catalysts represent a unique opportunity to deploy nanomanufacturing technologies. Re-refining of used lube oil offers an opportunity to create manufacturing jobs and decrease dependence on imported petroleum. Improved catalysts are required to produce a better quality product, decrease environmental impact, extend catalyst life, and improve overall economics of lube oil re-refining. Argonne National Laboratory (Argonne) in cooperation with Universal Lubricants, Inc. (ULI) and Chemical Engineering Partners (CEP) have carried out a Cooperative Research and Development Agreement (CRADA) to prepare nanostructured hydrotreating catalysts using atomic layer deposition (ALD) to exhibit superior performance for the re-refining of used lube oil. We investigated the upgrading of recycled lube oil by hydrogenation using commercial, synthetically-modified commercial catalysts, and synthesized catalysts. A down-flow (trickle bed) catalytic unit was used for the hydrogenation experiments. In addition to carrying out elemental analyses of the various feed and product fractions, characterization was undertaken using H{sup 1} and C{sup 13} NMR. Initially commercial were evaluated. Second these commercial catalysts were promoted with precious metals using atomic layer deposition (ALD). Performance improvements were observed that declined with catalyst aging. An alternate approach was undertaken to deeply upgrade ULI product oils. Using a synthesized catalyst, much lower hydrogenation temperatures were required than commercial catalysts. Other performance improvements were also observed. The resulting lube oil fractions were of high purity even at low reaction severity. The

  15. Brain Implants for Prediction and Mitigation of Epileptic Seizures - Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Gopalsami, Nachappa

    2016-09-29

    This is a CRADA final report on C0100901 between Argonne National Laboratory and Flint Hills Scientific, LLC of Lawrence, Kansas. Two brain implantable probes, a surface acoustic wave probe and a miniature cooling probe, were designed, built, and tested with excellent results.

  16. CRADA Final Report for CRADA Number NFE-10-02991 "Development and Commercialization of Alternative Carbon Precursors and Conversion Technologies"

    Energy Technology Data Exchange (ETDEWEB)

    Norris, Rober [ORNL; Paulauskas, Felix [ORNL; Naskar, Amit [ORNL; Kaufman, Michael [ORNL; Yarborough, Ken [ORNL; Derstine, Chris [The Dow Chemical Company

    2013-10-01

    The overall objective of the collaborative research performed by the Oak Ridge National Laboratory (ORNL) and the Dow Chemical Company under this Cooperative Research And Development Agreement (CRADA NFE-10-02991) was to develop and establish pathways to commercialize new carbon fiber precursor and conversion technology. This technology is to produce alternative polymer fiber precursor formulations as well as scaled energy-efficient advanced conversion technology to enable continuous mode conversion to obtain carbonized fibers that are technically and economically viable in industrial markets such as transportation, wind energy, infrastructure and oil drilling applications. There have been efforts in the past to produce a low cost carbon fiber. These attempts have to be interpreted against the backdrop of the market needs at the time, which were strictly military aircraft and high-end aerospace components. In fact, manufacturing costs have been reduced from those days to current practice, where both process optimization and volume production have enabled carbon fiber to become available at prices below $20/lb. However, the requirements of the lucrative aerospace market limits further price reductions from current practice. This approach is different because specific industrial applications are targeted, most specifically wind turbine blade and light vehicle transportation, where aircraft grade carbon fiber is not required. As a result, researchers are free to adjust both manufacturing process and precursor chemistry to meet the relaxed physical specifications at a lower cost. This report documents the approach and findings of this cooperative research in alternative precursors and advanced conversion for production of cost-effective carbon fiber for energy missions. Due to export control, proprietary restrictions, and CRADA protected data considerations, specific design details and processing parameters are not included in this report.

  17. Hydrothermal Liquefaction of Agricultural and Biorefinery Residues Final Report – CRADA #PNNL/277

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.; Rotness, Leslie J.; Zacher, Alan H.; Fjare, K. A.; Dunn, B. C.; McDonald, S. L.; Dassor, G.

    2010-07-28

    This project was performed as a Cooperative Research and Development Agreement (CRADA) with the participants: Archer-Daniels-Midland Company (ADM), ConocoPhillips (COP), and Pacific Northwest National Laboratory (PNNL). Funding from the federal government was provided by the Office of the Biomass Program within the Energy Efficiency and Renewable Energy assistant secretariat as part of the Thermochemical Conversion Platform. The three-year project was initiated in August 2007 with formal signing of the CRADA (#PNNL/277) in March 3, 2008 with subsequent amendments approved in November of 2008 and August of 2009. This report describes the results of the work performed by PNNL and the CRADA partners ADM and COP. It is considered Protected CRADA Information and is not available for public disclosure. The work conducted during this project involved developing process technology at PNNL for hydrothermal liquefaction (HTL) of agricultural and biorefinery residues and catalytic hydrothermal gasification (CHG) of the aqueous byproduct from the liquefaction step. Related work performed by the partners included assessment of aqueous phase byproducts, hydroprocessing of the bio-oil product and process analysis and economic modeling of the technology.

  18. Frito-Lay North America/NREL CRADA: Cooperative Research and Development Final Report, CRADA Number CRD-06-176

    Energy Technology Data Exchange (ETDEWEB)

    Walker, A.

    2013-06-01

    Frito Lay North America (FLNA) requires technical assistance for the evaluation and implementation of renewable energy and energy efficiency projects in production facilities and distribution centers across North America. Services provided by NREL do not compete with those available in the private sector, but rather provide FLNA with expertise to create opportunities for the private sector renewable/efficiency industries and to inform FLNA decision making regarding cost-effective projects. Services include: identifying the most cost-effective project locations based on renewable energy resource data, utility data, incentives and other parameters affecting projects; assistance with feasibility studies; procurement specifications; design reviews; and other services to support FNLA in improving resource efficiency at facilities. This Cooperative Research and Development Agreement (CRADA) establishes the terms and conditions under which FLNA may access capabilities unique to the laboratory and required by FLNA. Each subsequent task issued under this umbrella agreement would include a scope-of-work, budget, schedule, and provisions for intellectual property specific to that task.

  19. SWAY/NREL Collaboration on Offshore Wind System Testing and Analysis: Cooperative Research and Development Final Report, CRADA Number CRD-11-459

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, A.

    2015-02-01

    This shared resources CRADA defines collaborations between the National Renewable Energy Laboratory and SWAY. Under the terms and conditions described in this CRADA agreement, NREL and SWAY will collaborate on the SWAY 1/5th-scale floating wind turbine demonstration project in Norway. NREL and SWAY will work together to obtain measurement data from the demonstration system to perform model validation.

  20. Application of a Barrier Filter at a High Purity Synthetic Graphite Plant, CRADA 99-F035, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2000-08-31

    Superior Graphite Company and the US Department of Energy have entered into a Cooperative Research and Development Agreement (CRADA) to study the application of ceramic barrier filters at its Hopkinsville, Kentucky graphite plant. Superior Graphite Company is a worldwide leader in the application of advanced thermal processing technology to produce high purity graphite and carbons. The objective of the CRADA is to determine the technical and economic feasibility of incorporating the use of high-temperature filters to improve the performance of the offgas treatment system. A conceptual design was developed incorporating the ceramic filters into the offgas treatment system to be used for the development of a capital cost estimate and economic feasibility assessment of this technology for improving particulate removal. This CRADA is a joint effort of Superior Graphite Company, Parsons Infrastructure and Technology Group, and the National Energy Technology Laboratory (NETL) of the US Department of Energy (DOE).

  1. Tire Development for Effective Transportation and Utilization of Used Tires, CRADA 01-N044, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Susan M. Maley

    2004-03-31

    Scrap tires represent a significant disposal and recycling challenge for the United States. Over 280 million tires are generated on an annual basis, and several states have large stockpiles or abandoned tire piles that are slated for remediation. While most states have programs to address the accumulation and generation of scrap tires, most of these states struggle with creating and sustaining recycling or beneficial end use markets. One of the major issues with market development has been the costs associated with transporting and processing the tires into material for recycling or disposal. According to a report by the Rubber Manufactures Association tire-derived fuel (TDF) represents the largest market for scrap tires, and approximately 115 million tires were consumed in 2001 as TDF (U.S. Scrap Tire Markets, 2001, December 2002, www.rma.org/scraptires). This market is supported primarily by cement kilns, followed by various industries including companies that operate utility and industrial boilers. However the use of TDF has not increased and the amount of TDF used by boiler operators has declined. The work completed through this cooperative research and development agreement (CRADA) has shown the potential of a mobile tire shredding unit to economically produce TDF and to provide an alterative low cost fuel to suitable coal-fired power systems. This novel system addresses the economic barriers by processing the tires at the retailer, thereby eliminating the costs associated with hauling whole tires. The equipment incorporated into the design allow for small 1-inch chunks of TDF to be produced in a timely fashion. The TDF can then be co-fired with coal in suitable combustion systems, such as a fluidized bed. Proper use of TDF has been shown to boost efficiency and reduce emissions from power generation systems, which is beneficial to coal utilization in existing power plants. Since the original scope of work outlined in the CRADA could not be completed because

  2. Characterization of the Tribological Behavior of Oxide-Based NanoMaterials: Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, George [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-04

    Under the Argonne/Pixelligent cooperative research and development agreement (CRADA – C1200801), Argonne performed labscale tribological tests on proprietary nano-sized ZrO2 material developed by Pixelligent. Pixelligent utilized their proprietary process to prepare variants with different surfactants at different loadings in different carrier fluids for testing and evaluation at Argonne. Argonne applied a range of benchtop tribological test rigs to evaluate friction and wear under a range of conditions (contact geometry, loads, speeds, and temperature) that simulated a broad range of conditions experienced in engines and driveline components. Post-test analysis of worn surfaces provided information on the structure and chemistry of the tribofilms produced during the tests.

  3. New Materials for Electric Drive Vehicles - Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Carter, J. David [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-10-18

    This project was sponsored by the US DOE Global Initiatives for Proliferation Prevention. The object was for Ukrainian and US partners, including Argonne, AETC, and Dontech to develop special carbon materials and factory production equipment with the goal of making better car batteries to achieve DOE's goals for all-electric and plug-in hybrid electric vehicles. Carbon materials are used in designs for lithium-ion batteries and metal-air batteries, both leading contenders for future electric cars. Specifically, the collaborators planned to use the equipment derived from this project to develop a rechargeable battery system that will use the carbon materials produced by the innovative factory process equipment. The final outcome of the project was that the Ukrainian participants consisting of the Kharkov Institute of Physics and Technology (KIPT), the Institute of Gas of National Academy of Sciences of Ukraine and the Materials Research Center, Ltd. designed, built, tested and delivered 14 pieces of processing equipment for pilot scale carbon production lines at the AETC, Arlington Heights facilities. The pilot scale equipment will be used to process materials such as activated carbon, thermally expanded graphite and carbon coated nano-particles. The equipment was shipped from Ukraine to the United States and received by AETC on December 3, 2013. The equipment is on loan from Argonne, control # 6140. Plug-in hybrid electric vehicles (PHEV) and all-electric vehicles have already demostrated success in the U.S. as they begin to share the market with older hybrid electric designs. When the project was conceived, PHEV battery systems provided a ~40 mile driving range (2011 figures). DOE R&D targets increased this to >100 miles at reduced cost less than $250/kWh (2011 figures.) A 2016 Tesla model S has boasted 270 miles. The project object was to develop pilot-production line equipment for advanced hybrid battery system that achieves cycle life of 1000, an energy

  4. Evaluation of Durable Metallic Supports for Catalytic Combustors, CRADA Final Report ORNL 00-0570

    Energy Technology Data Exchange (ETDEWEB)

    Pint, B. A. [ORNL; Wright, I. G. [ORNL; Lara-Curzio, E. [ORNL; McCarty, J. [Catalytica Energy Systems, Inc.; Barnes, J. [Catalytica Energy Systems, Inc.

    2003-10-01

    In 2000, a Cooperative Research and Development Agreement (CRADA) was undertaken between the Oak Ridge National Laboratory (ORNL) and Catalytica Energy Systems Incorporated (CESI) to determine the properties of current metallic catalyst supports and examine new candidate alloys for this application. A team was established at ORNL to examine oxidation-limited lifetime of these thin-walled metallic components using standard lifetime models and to measure the mechanical properties of the foils (40-200:m in thickness) which can differ substantially from bulk properties. Oxidation experiments were conducted on foil specimens at 700/-1100/C in laboratory air and in air with 10 vol.% water vapor to better simulate the combustor environment. At the higher test temperatures, time to oxidation-induced (i.e. breakaway oxidation) failure was determined in 1h cycles in order to verify predictions from a standard reservoir-type oxidation lifetime model. Selected specimens were run for >10,000h in 100 or 500h cycles at lower test temperatures in order to determine the oxidation kinetics for the model. The creep properties of selected foils were measured for 4,000-8,000h at operation-relevant stresses and temperatures. None of the new candidate alloys significantly out-performed currently used alloys in laboratory testing, particularly in oxidation lifetime testing. Therefore, engine testing was not performed on any of the new candidate alloys. Both the oxidation- and creep-resistance of FeCrAl alloys was greater than expected and the results of the CRADA allowed CESI to extend life or increase operating temperatures for these lower cost substrate alloys in the next generation of catalyst modules.

  5. Recycling end-of-life vehicles of the future. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Jody, B. J.; Pomykala, J. A.; Spangenberger, J. S.; Daniels, E.; Energy Systems

    2010-01-14

    Argonne National Laboratory (the Contractor) entered into a Cooperative Research and Development Agreement (CRADA) with the following Participants: Vehicle Recycling Partnership, LLC (VRP, which consists of General Motors [GM], Ford, and Chrysler), and the American Chemistry Council - Plastics Division (ACC-PD). The purpose of this CRADA is to provide for the effective recycling of automotive materials. The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use of advanced lightweighting materials or systems in future vehicles. The issues, technical requirements, and cost and institutional considerations in achieving that goal are complex and will require a concerted, focused, and systematic analysis, together with a technology development program. The scope and tasks of this program are derived from 'A Roadmap for Recycling End-of-Life Vehicles of the Future,' prepared in May 2001 for the DOE Office of Energy, Efficiency, and Renewable Energy (EERE)-Vehicle Technologies Program. The objective of this research program is to enable the maximum recycling of automotive materials and obsolete vehicles through the development and commercialization of technologies for the separation and recovery of materials from end-of-life vehicles (ELVs). The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use

  6. CRADA Final Report for CRADA Number ORNL00-0605: Advanced Engine/Aftertreatment System R&D

    Energy Technology Data Exchange (ETDEWEB)

    Pihl, Josh A [ORNL; West, Brian H [ORNL; Toops, Todd J [ORNL; Adelman, Brad [Navistar; Derybowski, Edward [Navistar

    2011-10-01

    Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT), also known as NOx adsorber catalyst regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy. Under full-load, rated speed conditions, injection of fuel upstream of the DOC reduced the fuel penalty for a given level of NOx reduction by 10-20%. GC-MS showed that fuel compounds were 'cracked' into smaller hydrocarbon species over the DOC, particularly light alkenes. GC-MS analysis of HC species entering and exiting the LNT showed high utilization of light alkenes, followed by mono-aromatics; branched alkanes passed through the LNT largely unreacted. Follow-on experiments at a 'road load' condition were conducted, revealing that the NOx reduction was better without the DOC at lower temperatures. The improved performance was attributed to the large swings in the NOx adsorber core temperature. Split-injection experiments were conducted with ultra-low sulfur diesel fuel and three pure HC compounds: 1-pentene, toluene, and iso-octane. The pure

  7. CRADA Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites

    Energy Technology Data Exchange (ETDEWEB)

    Janke, C.J.

    2005-10-17

    Electron beam (EB) curing is a technology that promises, in certain applications, to deliver lower cost and higher performance polymer matrix composite (PMC) structures compared to conventional thermal curing processes. PMCs enhance performance by making products lighter, stronger, more durable, and less energy demanding. They are essential in weight- and performance-dominated applications. Affordable PMCs can enhance US economic prosperity and national security. US industry expects rapid implementation of electron beam cured composites in aircraft and aerospace applications as satisfactory properties are demonstrated, and implementation in lower performance applications will likely follow thereafter. In fact, at this time and partly because of discoveries made in this project, field demonstrations are underway that may result in the first fielded applications of electron beam cured composites. Serious obstacles preventing the widespread use of electron beam cured PMCs in many applications are their relatively poor interfacial properties and resin toughness. The composite shear strength and resin toughness of electron beam cured carbon fiber reinforced epoxy composites were about 25% and 50% lower, respectively, than those of thermally cured composites of similar formulations. The essential purpose of this project was to improve the mechanical properties of electron beam cured, carbon fiber reinforced epoxy composites, with a specific focus on composite shear properties for high performance aerospace applications. Many partners, sponsors, and subcontractors participated in this project. There were four government sponsors from three federal agencies, with the US Department of Energy (DOE) being the principal sponsor. The project was executed by Oak Ridge National Laboratory (ORNL), NASA and Department of Defense (DOD) participants, eleven private CRADA partners, and two subcontractors. A list of key project contacts is provided in Appendix A. In order to properly

  8. CRADA Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites

    Energy Technology Data Exchange (ETDEWEB)

    Janke, C.J.

    2005-10-17

    Electron beam (EB) curing is a technology that promises, in certain applications, to deliver lower cost and higher performance polymer matrix composite (PMC) structures compared to conventional thermal curing processes. PMCs enhance performance by making products lighter, stronger, more durable, and less energy demanding. They are essential in weight- and performance-dominated applications. Affordable PMCs can enhance US economic prosperity and national security. US industry expects rapid implementation of electron beam cured composites in aircraft and aerospace applications as satisfactory properties are demonstrated, and implementation in lower performance applications will likely follow thereafter. In fact, at this time and partly because of discoveries made in this project, field demonstrations are underway that may result in the first fielded applications of electron beam cured composites. Serious obstacles preventing the widespread use of electron beam cured PMCs in many applications are their relatively poor interfacial properties and resin toughness. The composite shear strength and resin toughness of electron beam cured carbon fiber reinforced epoxy composites were about 25% and 50% lower, respectively, than those of thermally cured composites of similar formulations. The essential purpose of this project was to improve the mechanical properties of electron beam cured, carbon fiber reinforced epoxy composites, with a specific focus on composite shear properties for high performance aerospace applications. Many partners, sponsors, and subcontractors participated in this project. There were four government sponsors from three federal agencies, with the US Department of Energy (DOE) being the principal sponsor. The project was executed by Oak Ridge National Laboratory (ORNL), NASA and Department of Defense (DOD) participants, eleven private CRADA partners, and two subcontractors. A list of key project contacts is provided in Appendix A. In order to properly

  9. Micro-toughened titanium-based intermetallics for high-temperature service. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Liu, C.T.; Blue, C.A. [and others

    1997-11-01

    This Cooperative Research and Development Agreement (CRADA) report deals with the composition development, processing parameter development, microstructural evaluation, and mechanical properties development of the {beta} TiAl alloys. Two series of alloy compositions were identified. The first series consisted of four alloys, and the second series consisted of three alloys. The powders were packed in titanium cans, evacuated, and sealed. The titanium cans were hot extruded at 1150, 1250, and 1400{degrees}C to an area reduction ratio of 16:1. The extruded bars were heat treated between 800 and 1320{degrees}C, and their microstructure characterized in the extended and heat-treated condition by optical, scanning, and transmission electron microscopy (TEM). The microstructural features such as colony size, width of colony boundary {beta} layer, interlamellar spacing, {alpha}{sub 2}-{alpha}{sub 2} spacing, {beta}lamellar width, and {alpha}{sub 2}-{beta} layer ratio were quantified. Tensile bars were prepared from the extruded bars by electrodischarge machining followed by grinding. Tensile tests were conducted from room temperature to 1000{degrees}C. Three-point-bend tests were used to measure the fracture toughness at both room temperature and 800{degrees}C. The effect of long-term annealing at 800 and 1000{degrees}C on one of the alloys was measured at room temperature. Tensile properties of the alloys of this study were compared with the data reported in literature.

  10. Centralized Cryptographic Key Management and Critical Risk Assessment - CRADA Final Report For CRADA Number NFE-11-03562

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, R. K. [ORNL; Peters, Scott [Sypris Electronics, LLC

    2014-05-28

    The Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) Cyber Security for Energy Delivery Systems (CSEDS) industry led program (DE-FOA-0000359) entitled "Innovation for Increasing Cyber Security for Energy Delivery Systems (12CSEDS)," awarded a contract to Sypris Electronics LLC to develop a Cryptographic Key Management System for the smart grid (Scalable Key Management Solutions for Critical Infrastructure Protection). Oak Ridge National Laboratory (ORNL) and Sypris Electronics, LLC as a result of that award entered into a CRADA (NFE-11-03562) between ORNL and Sypris Electronics, LLC. ORNL provided its Cyber Security Econometrics System (CSES) as a tool to be modified and used as a metric to address risks and vulnerabilities in the management of cryptographic keys within the Advanced Metering Infrastructure (AMI) domain of the electric sector. ORNL concentrated our analysis on the AMI domain of which the National Electric Sector Cyber security Organization Resource (NESCOR) Working Group 1 (WG1) has documented 29 failure scenarios. The computational infrastructure of this metric involves system stakeholders, security requirements, system components and security threats. To compute this metric, we estimated the stakes that each stakeholder associates with each security requirement, as well as stochastic matrices that represent the probability of a threat to cause a component failure and the probability of a component failure to cause a security requirement violation. We applied this model to estimate the security of the AMI, by leveraging the recently established National Institute of Standards and Technology Interagency Report (NISTIR) 7628 guidelines for smart grid security and the International Electrotechnical Commission (IEC) 63351, Part 9 to identify the life cycle for cryptographic key management, resulting in a vector that assigned to each stakeholder an estimate of their average loss in terms of dollars per day of system

  11. Reduced dust emission industrial vacuum system. Final report/project accomplishments summary, CRADA Number KCP941001

    Energy Technology Data Exchange (ETDEWEB)

    Yerganian, S. [Allied-Signal Aerospace Co., Kansas City, MO (United States). Kansas City Div.; Wilson, S. [Billy Goat Industries, Lee`s Summit, MO (United States)

    1997-02-01

    The purpose of this project was to modify the design of a Billy Goat Industries VQ series industrial litter vacuum cleaner currently in production to allow it to be effective in a dusty environment. Other desired results were that the new design be easily and economically manufacturable, safe and easy for the operator to use and maintain, and easily adaptable to the rest of the Billy Goat Industries product line. To meet these objectives, the project plan was divided into four main phases. The first phase consisted of design overview and concept development. The second phase consisted of developing a detailed design based on the lessons learned from the prototype built in the first phase. The third phase consisted of refinement of the detailed design based on testing and marketing review. The fourth phase consisted of final reporting on the activities of the CRADA. The project has been terminated due to technical difficulties and a lack of confidence that practical, marketable solutions to these problems could be found.

  12. Development of lifetime test procedure for powder evacuated panel insulation. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Wilkes, K E; Graves, R S; Childs, K W

    1996-03-01

    This CRADA is between Appliance Research Consortium (ARC) of the Association of Home Appliance Manufacturers (AHAM) and the Lockheed Martin Energy Research Corp. A Powder Evacuated Panel (PEP) is a "super" thermal insulation, having a thermal resistivity (R) substantially above that of existing insulation without the environmental problems of some insulations such as Chlorofluorocarbon (CFC) blown foam.

  13. Advanced variable speed air source integrated heat pump (AS-IHP) development - CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Munk, Jeffrey D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Ally, Moonis Raza [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

    2015-09-30

    Between August 2011 and September 2015, Oak Ridge National Laboratory (ORNL) and Nordyne, LLC (now Nortek Global HVAC LLC, NGHVAC) engaged in a Cooperative Research and Development Agreement (CRADA) to develop an air-source integrated heat pump (AS-IHP) system for the US residential market. Two generations of laboratory prototype systems were designed, fabricated, and lab-tested during 2011-2013. Performance maps for the system were developed using the latest research version of the DOE/ORNL Heat Pump Design Model, or HPDM, (Rice 1991; Rice and Jackson 2005; Shen et al 2012) as calibrated against the lab test data. These maps were the input to the TRNSYS (SOLAR Energy Laboratory, et al, 2010) system to predict annual performance relative to a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (combination of 13 SEER air-source heat pump (ASHP) and resistance water heater with Energy Factor (EF) of 0.9). Predicted total annual energy savings, while providing space conditioning and water heating for a tight, well insulated 2600 ft2 (242 m2) house at 5 U.S. locations, ranged from 46 to 61%, averaging 52%, relative to the baseline system (lowest savings at the cold-climate Chicago location). Predicted energy use for water heating was reduced 62 to 76% relative to resistance WH. Based on these lab prototype test and analyses results a field test prototype was designed and fabricated by NGHVAC. The unit was installed in a 2400 ft2 (223 m2) research house in Knoxville, TN and field tested from May 2014 to April 2015. Based on the demonstrated field performance of the AS-IHP prototype and estimated performance of a baseline system operating under the same loads and weather conditions, it was estimated that the prototype would achieve ~40% energy savings relative to the minimum efficiency suite. The estimated WH savings were >60% and SC mode savings were >50%. But estimated SH savings were only about 20%. It is believed that had the test

  14. Acciona Solar Technology Performance Evaluation: Cooperative Research and Development Final Report, CRADA Number CRD-10-384

    Energy Technology Data Exchange (ETDEWEB)

    Mehos, M. S.

    2014-01-01

    Under this agreement, NREL will work with Acciona to conduct joint testing, evaluation, and data collection related to Acciona's solar technologies and systems. This work includes, but is not limited to, testing and evaluation of solar component and system technologies, data collection and monitoring, performance evaluation, reliability testing, and analysis. This work will be conducted at Acciona's Nevada Solar One (NSO) power plant and NREL test facilities. Specific projects will be developed on a task order basis. Each task order will identify the name of the project and deliverables to be produced under the task order. Each task order will delineate an estimated completion date based on a project's schedule. Any reports developed under this CRADA must be reviewed by both NREL and Acciona and approved by each organization prior to publication of results or documents.

  15. Butanol / Honda CRADA Report

    Science.gov (United States)

    2015-02-01

    the manufacturer for the outboard engines used on the RB-S, entered into a Cooperative Research and Development Agreement (CRADA) to study the use of...as a restrictive factor. Item Horsepower output characterfsti<:s Exhaust gas Allowable mixing ratio of butanol 0"-’ SO vol % Engine ...4 ~ 3 2 1 0 20 20 20 Engine o il Visoosity-Normal Use Engine 70 122 174 218 270 320 350 Engine Hours TBN- Normal Use Engine

  16. Atrial Model Development and Prototype Simulations: CRADA Final Report on Tasks 3 and 4

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Villongco, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lightstone, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Richards, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-28

    The goal of this CRADA was to develop essential tools needed to simulate human atrial electrophysiology in 3-dimensions using an anatomical image-based anatomy and physiologically detailed human cellular model. The atria were modeled as anisotropic, representing the preferentially longitudinal electrical coupling between myocytes. Across the entire anatomy, cellular electrophysiology was heterogeneous, with left and right atrial myocytes defined differently. Left and right cell types for the “control” case of sinus rhythm (SR) was compared with remodeled electrophysiology and calcium cycling characteristics of chronic atrial fibrillation (cAF). The effects of Isoproterenol (ISO), a beta-adrenergic agonist that represents the functional consequences of PKA phosphorylation of various ion channels and transporters, was also simulated in SR and cAF to represent atrial activity under physical or emotional stress. Results and findings from Tasks 3 & 4 are described. Tasks 3 and 4 are, respectively: Input parameters prepared for a Cardioid simulation; Report including recommendations for additional scenario development and post-processing analytic strategy.

  17. National Security Science and Technology Initiative: Air Cargo Screening, Final Report for CRADA Number NFE-07-01081

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, Philip [ORNL; Bush, John [Battelle Memorial Institute; Bowerman, Biays [Brookhaven National Laboratory; Cespedes, Ernesto [Idaho National Laboratory; White, Timothy [Pacific Northwest National Laboratory

    2004-12-01

    The non-intrusive inspection (NII) of consolidated air cargo carried on commercial passenger aircraft continues to be a technically challenging, high-priority requirement of the Department of Homeland Security’s Science and Technology Directorate (DHS S&T), the Transportation Security Agency and the Federal Aviation Administration. The goal of deploying a screening system that can reliably and cost-effectively detect explosive threats in consolidated cargo without adversely affecting the flow of commerce will require significant technical advances that will take years to develop. To address this critical National Security need, the Battelle Memorial Institute (Battelle), under a Cooperative Research and Development Agreement (CRADA) with four of its associated US Department of Energy (DOE) National Laboratories (Oak Ridge, Pacific Northwest, Idaho, and Brookhaven), conducted a research and development initiative focused on identifying, evaluating, and integrating technologies for screening consolidated air cargo for the presence of explosive threats. Battelle invested $8.5M of internal research and development funds during fiscal years 2007 through 2009.

  18. In-service testing of Ni{sub 3}Al coupons and trays in carburizing furnaces at Delphi Saginaw. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Santella, M.L.; Viswanathan, S.; Swindeman, R.W. [Oak Ridge National Lab., TN (United States); Chatterjee, M. [General Motors Corporaion, Saginaw Division (United States)

    1998-08-01

    This Cooperative Research and Development Agreement (CRADA) report deals with the development of nickel aluminide alloy for improved longer life heat-resistant fixture assemblies for batch and continuous pusher carburizing furnaces. The nickel aluminide development was compared in both coupon and component testing with the currently used Fe-Ni-Cr heat-resisting alloy known as HU. The specific goals of the CRADA were: (1) casting process development, (2) characterization and possible modification of the alloy composition to optimize its manufacturing ability and performance under typical furnace operating conditions, and (3) testing and evaluation of specimens and prototype fixtures. In support of the CRADA objectives, coupons of nickel aluminide and the HU alloy were installed in both batch and pusher furnaces. The coupons were taken from two silicon levels and contained welds made with two different filler compositions (IC-221LA and IC-221W). Both nickel-aluminide and HU coupons were removed from the batch and pusher carburizing furnace at time intervals ranging from one month to one year. The exposed coupons were cut and mounted for metallographic, hardness, and microprobe analysis. The results of the microstructural analysis have been transmitted to General Motors Corporation, Saginaw Division (Delphi Saginaw) through reports that were presented at periodic CRADA review meetings. Based on coupon testing and verification of the coupon results with the testing of trays, Delphi Saginaw moved forward with the use of six additional trays in a batch furnace and two assemblies in a pusher furnace. Fifty percent of the trays and fixtures are in the as-cast condition and the remaining trays and fixtures are in the preoxidized condition. The successful operating experience of two assemblies in the pusher furnace for nearly a year formed the basis for a production run of 63 more assemblies. The production run required melting of 94 heats weighing 500 lb. each. Twenty

  19. CENER/NREL Collaboration in Testing Facility and Code Development: Cooperative Research and Development Final Report, CRADA Number CRD-06-207

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, P.

    2014-11-01

    Under the funds-in CRADA agreement, NREL and CENER will collaborate in the areas of blade and drivetrain testing facility development and code development. The project shall include NREL assisting in the review and instruction necessary to assist in commissioning the new CENER blade test and drivetrain test facilities. In addition, training will be provided by allowing CENER testing staff to observe testing and operating procedures at the NREL blade test and drivetrain test facilities. CENER and NREL will exchange blade and drivetrain facility and equipment design and performance information. The project shall also include exchanging expertise in code development and data to validate numerous computational codes.

  20. Conversion of Indigenous Agricultural Waste Feedstocks to Fuel Ethanol. Cooperative Research and Development Final Report, CRADA Number CRD-13-504

    Energy Technology Data Exchange (ETDEWEB)

    Elander, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-03-27

    This Cooperative Research and Development Agreement (CRADA) is between the National Renewable Energy Laboratory (NREL), a world leader in biomass conversion research and Ecopetrol American Inc., Ecopetrol S.A.'s U.S. subsidiary. The research and development efforts described in the Joint Work Statement (JWS) will take advantage of the strengths of both parties. NREL will use its Integrated Biorefinery Facility and vast experience in the conversion of lignocellulosic feedstocks to fuel ethanol to develop processes for the conversion of Ecopetrol's feedstocks. Ecopetrol will establish the infrastructure in Columbia to commercialize the conversion process.

  1. NaREC Offshore and Drivetrain Test Facility Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-04-140

    Energy Technology Data Exchange (ETDEWEB)

    Musial, W.

    2014-08-01

    The National Renewable Energy Laboratory (NREL) and the National Renewable Energy Centre (NaREC) in the United Kingdom (UK) have a mutual interest in collaborating in the development of full-scale offshore wind energy and drivetrain testing facilities. NREL and NaREC will work together to share resources and experiences in the development of future wind energy test facilities. This Cooperative Research and Development Agreement (CRADA) includes sharing of test protocols, infrastructure cost data, test plans, pro forma contracting instruments, and safe operating strategies. Furthermore, NREL and NaREC will exchange staff for training and development purposes.

  2. Development of improved x-ray optics for analytical x-ray microbeams. CRADA final report for CRADA Number Y-1294-0283

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, D.A. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Gao, N.; Xiao, Q.F.; Ponomarev, I. [X-Ray Optical Systems, Inc., Albany, NY (United States)

    1996-03-18

    The purpose of this CRADA was to develop improved glass capillary, x-ray optics for analytical x-ray microbeam applications. X-Ray Optical Systems, Inc. (XOS) designed and fabricated capillary optics and LMES tested those optics for x-ray microanalytical applications using its unique X-Ray Microprobe. Tapered capillaries with 3-{micro}m and 8-{micro}m output openings were fabricated and tested. The tapered capillaries had better spectral quality for x-ray microfluorescence (XRMF) analysis, than non-tapered, straight capillaries that are currently used in the system. X-ray beam count-rates for the tapered capillaries were also greater than the straight capillaries. Two monolithic, polycapillary optics were fabricated and tested. The polycapillary optics produced focal spots of 40 and 100 {micro}m. Beam intensities for the polycapillaries were, respective, 44 and 18 times the intensities found in straight 50-{micro}m and 100-{micro}m capillaries. High-sensitivity scanning will be possible because of the enhanced intensity of the polycapillary optic. LMES and the DP program will benefit from improved capabilities for nondestructive x-ray microanalysis, while XOS will benefit from test results that will enhance the marketability of their products.

  3. Brandon Research, Inc. Orthopedic Implant Cooperative Research and Development Agreement (CRADA) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, W.R.

    1999-04-22

    The project was a joint research effort between the U. S. Department of Energy's (DOE) Kansas City Plant (KCP) and Brandon Research, Inc. to develop ways to improve implants used for orthopedic surgery for joint replacement. The primary product produced by this study is design information, which may be used to develop implants that will improve long-term fixation and durability in the host bone environment.

  4. Electrical Characterization of Printed Nanocrystalline Silicon Films, Cooperative Research and Development Final Report, CRADA Number CRD-07-00241

    Energy Technology Data Exchange (ETDEWEB)

    Young, D.

    2011-05-01

    This CRADA helped Innovalight characterize and quantify their ink-based selective emitter technology. Controlled localized doping of selective emitter structures via Innovalight Silicon Ink technology was demonstrated. Both secondary ion mass spectrometry and scanning capacitance microscopy revealed; abrupt lateral dopant profiles at ink-printed boundaries. Uniform doping of iso- and pyramidal surfaces was also verified using scanning electron microscopy dopant contrast imaging.

  5. Advanced Borobond™ Shields for Nuclear Materials Containment and Borobond™ Immobilization of Volatile Fission Products - Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Wagh, Arun S. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-05-19

    Borobond is a company-proprietary material developed by the CRADA partner in collaboration with Argonne, and is based on Argonne's Ceramicrete technology. It is being used by DOE for nuclear materials safe storage, and Boron Products, LLC is the manufacturer and supplier of Borobond.

  6. Mobile Ocean Test Berth Support: Cooperative Research and Development Final Report, CRADA Number CRD-10-413

    Energy Technology Data Exchange (ETDEWEB)

    LiVecchi, Albert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    The Northwest National Marine Renewable Energy Center (NNMREC), headquartered at the Oregon State University, is establishing the capabilities to test prototype wave energy conversion devices in the ocean. This CRADA will leverage the technical expertise and resources at NREL in the wind industry and in ocean engineering to support and enhance the development of the NNMREC Mobile Ocean Test Berth (MOTB). This CRADA will provide direct support to NNMREC by providing design evaluation and review of the MOTB, developing effective protocols for testing of the MOTB and wave energy conversion devices in the ocean, assisting in the specification of appropriate instrumentation and data acquisition packages, and providing guidance on obtaining and maintaining A2LA (American Association for Laboratory Accreditation) accreditation.

  7. Cooperation on Lidar for Improved Wind Turbine Performance. Cooperative Research and Development Final Report, CRADA Number CRD-13-521

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, Paul [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-05-12

    Research into the use of lidar for improved wind turbine performance is an area of considerable interest. Lidars have been proposed to analyze and improve wind turbine pitch control performance, yaw alignment and control performance, as well as to improve power curve assessments. In this CRADA, NREL, NRG Systems, Inc. (“NRG”) and Avent Lidar Technology SAS (“Avent”) will collaborate on testing these concepts.

  8. Solar Thermal Conversion of Biomass to Synthesis Gas: Cooperative Research and Development Final Report, CRADA Number CRD-09-00335

    Energy Technology Data Exchange (ETDEWEB)

    Netter, J.

    2013-08-01

    The CRADA is established to facilitate the development of solar thermal technology to efficiently and economically convert biomass into useful products (synthesis gas and derivatives) that can replace fossil fuels. NREL's High Flux Solar Furnace will be utilized to validate system modeling, evaluate candidate reactor materials, conduct on-sun testing of the process, and assist in the development of solar process control system. This work is part of a DOE-USDA 3-year, $1M grant.

  9. Laboratory Testing of the Boundary Layer Momentum Transfer Rotational Filter Systems, NETL-Innovatech, Inc., CRADA 98-F026, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2000-08-22

    A patented dynamic mechanical filter developed by InnovaTech was previously shown to remove fine particulate matter from industrial process gas streams at ambient temperatures and pressures. An all-metal, high-temperature version of this novel media-less filter was fabricated under this Cooperative Research and Development Agreement (CRADA) with DOE/NETL-Morgantown for hot gas testing of the device. The technology is entirely different in both concept and design from conventional vortex separators, cyclones, or porous media filters. This new filtration concept is capable of separating heavy loading of fine particles without blinding, fouling or bridging, and would require minimal operational costs over its anticipated multi-year service life. The all-metal filter design eliminates thermal stress cracking and premature failure prevalent in conventional porous ceramic filters. In contrast, conventional porous media filters (i.e., ceramic cross-flow or candles) easily foul, require periodic cleaning (typically backpulsing), frequent replacement and subsequent disposal.

  10. Final Report of a CRADA Between Pacific Northwest National Laboratory and the General Motors Company (CRADA No. PNNL/271): “Degradation Mechanisms of Urea Selective Catalytic Reduction Technology”

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Do Heui; Lee, Jong H.; Peden, Charles HF; Howden, Ken; Kim, Chang H.; Oh, Se H.; Schmieg, Steven J.; Wiebenga, Michelle H.

    2011-12-13

    Diesel engines can offer substantially higher fuel efficiency, good driving performance characteristics, and reduced carbon dioxide (CO2) emission compared to stoichiometric gasoline engines. Despite the increasing public demand for higher fuel economy and reduced dependency on imported oil, however, meeting the stringent emission standards with affordable methods has been a major challenge for the wide application of these fuel-efficient engines in the US market. The selective catalytic reduction of NOx by urea (urea-SCR) is one of the most promising technologies for NOx emission control for diesel engine exhausts. To ensure successful NOx emission control in the urea-SCR technology, both a diesel oxidation catalyst (DOC) and a urea-SCR catalyst with high activity and durability are critical for the emission control system. Because the use of this technology for light-duty diesel vehicle applications is new, the relative lack of experience makes it especially challenging to satisfy the durability requirements. Of particular concern is being able to realistically simulate actual field aging of the catalyst systems under laboratory conditions, which is necessary both as a rapid assessment tool for verifying improved performance and certifiability of new catalyst formulations. In addition, it is imperative to develop a good understanding of deactivation mechanisms to help develop improved catalyst materials. In this CRADA program, General Motors Company and PNNL have investigated fresh, laboratory- and vehicle-aged DOC and SCR catalysts. The studies have led to a better understanding of various aging factors that impact the long-term performance of catalysts used in the urea-SCR technology, and have improved the correlation between laboratory and vehicle aging for reduced development time and cost. This Final Report briefly highlights many of the technical accomplishments and documents the productivity of the program in terms of peer-reviewed scientific publications

  11. Catalytic Conditioning and Conversion of Bio-Syngas: Cooperative Research and Development Final Report, CRADA Number CRD-10-418

    Energy Technology Data Exchange (ETDEWEB)

    Magrini, Kim [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-08-01

    There is a critical need to increase the carbon yield of the gasification process. To this end, it has been suggested that tars and chars formed as by-products of gasification be re-injected into the gasifier. In this CRADA work facile and inexpensive methods of modifying chars and tars received from Enerkem are studied with the aim of increasing their gasification rate upon re-injection into the gasifier. Adding iron to the char, both in nitrate form and in clay form, speeds the CO2 gasification of the char (CO2 + C --> 2CO). It has been more difficult to speed the gasification of tar mixed with char, likely due to clogging of pores, resulting in a reduced accessible surface area.

  12. New N-Type Polymers for Organic Photovoltaics: Cooperative Research and Development Final Report, CRADA Number CRD-06-177

    Energy Technology Data Exchange (ETDEWEB)

    Olson, D.

    2014-08-01

    This CRADA will develop improved thin film organic solar cells using a new n-type semiconducting polymer. High efficiency photovoltaics (PVs) based on inorganic semiconductors have good efficiencies (up to 30%) but are extremely expensive to manufacture. Organic PV technology has the potential to overcome this problem through the use of high-throughput production methods like reel-to-reel printing on flexible substrates. Unfortunately, today's best organic PVs have only a few percent efficiency, a number that is insufficient for virtually all commercial applications. The limited choice of stable n-type (acceptor) organic semiconductor materials is one of the key factors that prevent the further improvement of organic PVs. TDA Research, Inc. (TDA) previously developed a new class of electron-deficient (n-type) conjugated polymers for use in organic light emitting diodes (OLEDs). During this project TDA in collaboration with the National Renewable Energy Laboratory (NREL) will incorporate these electron-deficient polymers into organic photovoltaics and investigate their performance. TDA Research, Inc. (TDA) is developing new materials and polymers to improve the performance of organic solar cells. Materials being developed at TDA include spin coated transparent conductors, charge injection layers, fullerene derivatives, electron-deficient polymers, and three-phase (fullerene/polythiophene/dye) active layer inks.

  13. CRADA Final Report: Application of Dual-Mode Invertor Control to Commercially Available Radial-Gap Permanent Magnet Motors - Vol. 1

    Energy Technology Data Exchange (ETDEWEB)

    Lawler, J.S. (U. Tennessee-Knoxville); McKeever, J.W.; Downing, M.E.; Stahlhut, R.D (John Deere); Bremmer, R. (John Deere); Shoemaker, J.M. (John Deere); Seksarian, A.K. (john Deere); Poore, B. (John Deere); Lutz, J. (UQM)

    2006-05-01

    John Deere and Company (Deere), their partner, UQM Technologies, Inc. (UQM), and the Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center (PEEMRC) recently completed work on the cooperative research and development agreement (CRADA) Number ORNL 04-0691 outlined in this report. CRADA 04-0691 addresses two topical issues of interest to Deere: (1) Improved characterization of hydrogen storage and heat-transfer management; and (2) Potential benefits from advanced electric motor traction-drive technologies. This report presents the findings of the collaborative examination of potential operational and cost benefits from using ORNL/PEEMRC dual-mode inverter control (DMIC) to drive permanent magnet (PM) motors in applications of interest to Deere. DMIC was initially developed and patented by ORNL to enable PM motors to be driven to speeds far above base speed where the back-electromotive force (emf) equals the source voltage where it is increasingly difficult to inject current into the motor. DMIC is a modification of conventional phase advance (CPA). DMIC's dual-speed modes are below base speed, where traditional pulse-width modulation (PWM) achieves maximum torque per ampere (amp), and above base speed, where six-step operation achieves maximum power per amp. The modification that enables DMIC adds two anti-parallel thyristors in each of the three motor phases, which consequently adds the cost of six thyristors. Two features evaluated in this collaboration with potential to justify the additional thyristor cost were a possible reduction in motor cost and savings during operation because of higher efficiency, both permitted because of lower current. The collaborative analysis showed that the reduction of motor cost and base cost of the inverter was small, while the cost of adding six thyristors was greater than anticipated. Modeling the DMIC control displayed inverter efficiency gains due to reduced current

  14. CRADA Final Report: Properties of Vacuum Deposited Thin Films of Lithium Phosphorous Oxynitride (Lipon) with an Expanded Composition Range

    Energy Technology Data Exchange (ETDEWEB)

    Dudney, N.J.

    2003-12-29

    Thin films of an amorphous, solid-state, lithium electrolyte, referred to as ''Lipon'', were first synthesized and characterized at ORNL in 1991. This material is typically prepared by magnetron sputtering in a nitrogen plasma, which allows nitrogen atoms to substitute for part of the oxygen ions of Li{sub 3}PO{sub 4}. Lipon is the key component in the successful fabrication of ORNL's rechargeable thin film microbatteries. Cymbet and several other US Companies have licensed this technology for commercialization. Optimizing the properties of the Lipon material, particularly the lithium ion conductivity, is extremely important, yet only a limited range of compositions had been explored prior to this program. The goal of this CRADA was to develop new methods to prepare Lipon over an extended composition range and to determine if the film properties might be significantly improved beyond those previously reported by incorporating a larger N component into the film. Cymbet and ORNL investigated different deposition processes for the Lipon thin films. Cymbet's advanced deposition process not only achieved a higher deposition rate, but also permitted independent control the O and N flux to the surface of the growing film. ORNL experimented with several modified sputtering techniques and found that by using sectored sputter targets, composed of Li{sub 3}PO{sub 4} and Li{sub 3}N ceramic disks, thin Lipon films could be produced over an expanded composition range. The resulting Lipon films were characterized by electrical impedance, infrared spectroscopy, and several complementary analytical techniques to determine the composition. When additional N plus Li are incorporated into the Lipon film, the lithium conductivity was generally degraded. However, the addition of N accompanied by a slight loss of Li gave an increase in the conductivity. Although the improvement in the conductivity was only very modest and was a disappointing conclusion of

  15. Follow-On Cooperative Research and Development Agreement: MFIX to FLUENT Technology Transfer and Validation Studies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Syamlal, Madhava [US Department of Energy, Washington, DC (United States); Guenther, Chris [US Department of Energy, Washington, DC (United States); O' Brien, Thomas J. [US Department of Energy, Washington, DC (United States); Benyahia, Sofiane [Fluent Inc., New York, NY (United States); Shi, Shaoping [Fluent Inc., New York, NY (United States)

    2005-03-01

    This report summarizes the effort by NETL and Fluent on the Cooperative Research and Development Agreement No. 00-F039 signed in May 2000. The objective of the CRADA was to transfer technology from NETL's MFIX code into the commercial software FLUENT so as to increase the computational speed, accuracy, and utility of FLUENT. During the period of this CRADA MFIX was used to develop granular flow theories and used for simulating gas-solids chemical reactors. The FLUENT and MFIX predictions were compared with each other and with experimental data generated at NETL. The granular kinetic theory in FLUENT was improved as a result of this work, and a gas-solids reaction (ozone decomposition) was used as a test case for the gas-solids chemical reaction capability in FLUENT. Also, under a separate project, work has begun to transfer the coal combustion and gasification model in MFIX to FLUENT.

  16. FFP/NREL Collaboration on Hydrokinetic River Turbine Testing: Cooperative Research and Development Final Report, CRADA Number CRD-12-00473

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, F.

    2013-04-01

    This shared resources CRADA defines collaborations between the National Renewable Energy Laboratory (NREL) and Free Flow Power (FFP) set forth in the following Joint Work Statement. Under the terms and conditions described in this CRADA, NREL and FFP will collaborate on the testing of FFP's hydrokinetic river turbine project on the Mississippi River (baseline location near Baton Rouge, LA; alternate location near Greenville, MS). NREL and FFP will work together to develop testing plans, instrumentation, and data acquisition systems; and perform field measurements.

  17. Development of Abrasion-Resistant Coating for Solar Reflective Films. Cooperative Research and Development Final Report, CRADA Number CRD-07-247

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    The purpose of this CRADA is to develop an abrasion-resistant coating, suitable for use on polymeric-based reflective films (e.g., the ReflecTech reflective film), that allows for improved scratch resistance and enables the use of aggressive cleaning techniques (e.g., direct contact methods like brushing) without damaging the specular reflectance properties of the reflective film.

  18. Preliminary Structural Design Conceptualization for Composite Rotor for Verdant Power Water Current: Cooperative Research and Development Final Report, CRADA Number CRD-08-296

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, S.

    2011-02-01

    The primary thrust of the CRADA will be to develop a new rotor design that will allow higher current flows (>4m/s), greater swept area (6-11m), and in the process, will maximize performance and energy capture.

  19. Solar Technology Test, Evaluation, and Data Collection: Cooperative Research and Development Final Report, CRADA Number CRD-08-279

    Energy Technology Data Exchange (ETDEWEB)

    Albin, David S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-03-08

    Under this Agreement, NREL will work with Abengoa Solar Inc. on the testing, evaluation, and collection of data related to Abengoa Solar Inc. solar technologies and systems. This work includes, but is not limited to, testing and evaluation of solar component and system technologies, data collection and monitoring, performance evaluation, reliability testing, thermal energy storage integration, solar resource measurement and forecasting, grid impact testing, and analysis. This work will be conducted at NREL, SolarTAC (Aurora), and other field test locations.

  20. Solar Technology Validation Project - USS Data, LLC: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-04

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  1. Solar Technology Validation Project - Solargen (Met Station): Cooperative Research and Development Final Report, CRADA Number CRD-09-367-06

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  2. Solar Technology Validation Project - Iberdrola Renewables, Inc.: Cooperative Research and Development Final Report, CRADA Number CRD-08-298-3

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  3. Solar Technology Validation Project - Amonix, Inc.: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-13

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  4. Solar Technology Validation Project - Loyola Marymount University: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-03

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  5. Solar Technology Validation Project - RES Americas: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-11

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  6. Modeling of GE Appliances: Final Presentation

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Jason C.; Vyakaranam, Bharat; Leistritz, Sean M.; Parker, Graham B.

    2013-01-31

    This report is the final in a series of three reports funded by U.S. Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) in collaboration with GE Appliances’ through a Cooperative Research and Development Agreement (CRADA) to describe the potential of GE Appliances’ DR-enabled appliances to provide benefits to the utility grid.

  7. CRADA Final Report: Application of Dual-Mode Inverter Control to Commercially Available Radial-Gap Mermanent Magnet Motors - Vol. I

    Energy Technology Data Exchange (ETDEWEB)

    McKeever, John W [ORNL; Lawler, Jack [ORNL; Downing, Mark [ORNL; Stahlhut, Ronnie D [ORNL; Bremmer, R. [John Deere -- Moline Tech Center; Shoemaker, J. M. [John Deere -- Moline Tech Center; Seksarian, A. K. [John Deere -- Moline Tech Center; Poore, B. [John Deere -- Moline Tech Center; Lutz, Jon F [ORNL

    2006-05-01

    John Deere and Company (Deere), their partner, UQM Technologies, Inc. (UQM), and the Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center (PEEMRC) recently completed work on the cooperative research and development agreement (CRADA) Number ORNL 04-0691 outlined in this report. CRADA 04-0691 addresses two topical issues of interest to Deere: (1) Improved characterization of hydrogen storage and heat-transfer management; and (2) Potential benefits from advanced electric motor traction-drive technologies. This report presents the findings of the collaborative examination of potential operational and cost benefits from using ORNL/PEEMRC dual-mode inverter control (DMIC) to drive permanent magnet (PM) motors in applications of interest to Deere. DMIC was initially developed and patented by ORNL to enable PM motors to be driven to speeds far above base speed where the back-electromotive force (emf) equals the source voltage where it is increasingly difficult to inject current into the motor. DMIC is a modification of conventional phase advance (CPA). DMIC's dual-speed modes are below base speed, where traditional pulse-width modulation (PWM) achieves maximum torque per ampere (amp), and above base speed, where six-step operation achieves maximum power per amp. The modification that enables DMIC adds two anti-parallel thyristors in each of the three motor phases, which consequently adds the cost of six thyristors. Two features evaluated in this collaboration with potential to justify the additional thyristor cost were a possible reduction in motor cost and savings during operation because of higher efficiency, both permitted because of lower current. The collaborative analysis showed that the reduction of motor cost and base cost of the inverter was small, while the cost of adding six thyristors was greater than anticipated. Modeling the DMIC control displayed inverter efficiency gains due to reduced current

  8. 12 CFR 268.504 - Compliance with settlement agreements and final actions.

    Science.gov (United States)

    2010-01-01

    ... Compliance with settlement agreements and final actions. (a) Any settlement agreement knowingly and... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Compliance with settlement agreements and final actions. 268.504 Section 268.504 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF...

  9. 29 CFR 1614.504 - Compliance with settlement agreements and final action.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Compliance with settlement agreements and final action... COMMISSION FEDERAL SECTOR EQUAL EMPLOYMENT OPPORTUNITY Remedies and Enforcement § 1614.504 Compliance with settlement agreements and final action. (a) Any settlement agreement knowingly and voluntarily agreed to...

  10. NREL/University of Delaware Offshore Wind R&D Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-10-393

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-11-12

    Specifically, the work under this CRADA includes, but is not limited to, the development of test procedures for an offshore test site in Delaware waters; testing of installed offshore wind turbines; performance monitoring of those turbines; and a program of research and development on offshore wind turbine blades, components, coatings, foundations, installation and construction of bottom-fixed structures, environmental impacts, policies, and more generally on means to enhance the reliability, facilitate permitting, and reduce costs for offshore wind turbines. This work will be conducted both at NREL's National Wind Technology Center and participant facilities, as well as the established offshore wind test sites.

  11. Final Report of a CRADA Between Pacific Northwest National Laboratory and Cummins, Incorporated (CRADA No.PNNL/283): “Enhanced High and Low Temperature Performance of NOx Reduction Catalyst Materials”

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Feng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Szanyi, Janos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Yilin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Yong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Peden, Charles HF [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Howden, Ken [US Dept. of Energy, Washington, DC (United States); Currier, Neal [Cummins Inc., Columbus, IN (United States); Kamasamudram, Krishna [Cummins Inc., Columbus, IN (United States); Kumar, Ashok [Cummins Inc., Columbus, IN (United States); Li, J. [Cummins Inc., Columbus, IN (United States); Stafford, R. J. [Cummins Inc., Columbus, IN (United States); Yezerets, Aleksey [Cummins Inc., Columbus, IN (United States); Luo, J. [Cummins Inc., Columbus, IN (United States); Chen, H. Y. [Johnson Matthey Company, Royston (United Kingdom)

    2016-09-01

    of the most daunting challenges in R&D on new catalyst materials and processes that can effectively eliminate emissions at these quite low exhaust temperatures. This project has two clear focuses: (1) development of potassium-based high-temperature NSR materials, and studying their key causes of deactivation and methods of regeneration. By comparing results obtained on ‘Simple Model’ Pt-K/Al2O3 with ‘Enhanced Model’ Pt-K/ MgAlOx and Pt-K/TiO2 materials, we have developed an understanding of the role of various additives on the deactivation and regeneration processes. Studies have also been performed on the real commercial samples being used in a Dodge Ram truck with a Cummins diesel emission control system. However, the results about these ‘commercial samples’ will not be covered in this report. Following a brief description of our experimental approach, we will present a few highlights from some of the work performed in this CRADA with more details about these results provided in publications/reports/presentations lists presented at the end of the report. (2) for the Cu and Fe/Chabazite SCR catalysts, since these are so newly developed and references from open literature and industry are nearly absent, our work started from zeolite synthesis and catalyst synthesis methodology development, before research on their low- and high-temperature performance, deactivation, regeneration, etc. was conducted. Again, most work reported here is based on our “model” catalysts synthesized in-house. Work done on the ‘commercial samples’ will not be covered in this report.

  12. Final Report on ITER Task Agreement 81-10

    Energy Technology Data Exchange (ETDEWEB)

    Brad J. Merrill

    2009-01-01

    An International Thermonuclear Experimental Reactor (ITER) Implementing Task Agreement (ITA) on Magnet Safety was established between the ITER International Organization (IO) and the Idaho National Laboratory (INL) Fusion Safety Program (FSP) during calendar year 2004. The objectives of this ITA were to add new capabilities to the MAGARC code and to use this updated version of MAGARC to analyze unmitigated superconductor quench events for both poloidal field (PF) and toroidal field (TF) coils of the ITER design. This report documents the completion of the work scope for this ITA. Based on the results obtained for this ITA, an unmitigated quench event in an ITER larger PF coil does not appear to be as severe an accident as in an ITER TF coil.

  13. Jupiter Oxygen Corporation/Albany Research Center Crada Progress Report, September

    Energy Technology Data Exchange (ETDEWEB)

    Turner, Paul C.; Schoenfield, Mark (Jupiter Oxygen Corp.)

    2004-09-13

    The Albany Research Center (ARC) has developed a new Integrated Pollutant Removal (IPR) process for fossil-fueled boilers. Pursuant to a cooperative research and development agreement (CRADA) with Jupiter Oxygen Corporation, ARC currently is studying the IPR process as applied to the oxygen fuel technology developed by Jupiter. As discussed further below, these two new technologies are complementary. This interim report summarizes the study results to date and outlines the potential activities under the next phase of the CRADA with Jupiter.

  14. Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Hee Je [Argonne National Lab. (ANL), Argonne, IL (United States); Choi, Seungmok [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-10-09

    This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

  15. Improving Translation Models for Predicting the Energy Yield of Photovoltaic Power Systems. Cooperative Research and Development Final Report, CRADA Number CRD-13-526

    Energy Technology Data Exchange (ETDEWEB)

    Emery, Keith [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-08-04

    The project under this CRADA will analyze field data of various flat-plate and concentrator module technologies and cell measurements at the laboratory level. The field data will consist of current versus voltage data collected over many years on a latitude tilt test bed for Si, CdTe, amorphous silicon, and CIGS technologies. The concentrator data will be for mirror- and lens-based module designs using multijunction cells. The laboratory data will come from new measurements of cell performance with systematic variation of irradiance, temperature and spectral composition. These measurements will be labor-intensive and the aim will be to cover the widest possible parameter space for as many different PV samples as possible. The data analysis will require software tools to be developed. These tools will be customized for use with the specific NREL datasets and will be unsuitable for commercial release. The tools will be used to evaluate different translation equations against NREL outdoor datasets.

  16. Development of ZnTe:Cu Contacts for CdTe Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-08-320

    Energy Technology Data Exchange (ETDEWEB)

    Dhere, R.

    2012-04-01

    The main focus of the work at NREL was on the development of Cu-doped ZnTe contacts to CdTe solar cells in the substrate configuration. The work performed under the CRADA utilized the substrate device structure used at NREL previously. All fabrication was performed at NREL. We worked on the development of Cu-doped ZnTe as well as variety of other contacts such as Sb-doped ZnTe, CuxTe, and MoSe2. We were able to optimize the contacts to improve device parameters. The improvement was obtained primarily through increasing the open-circuit voltage, to values as high as 760 mV, leading to device efficiencies of 7%.

  17. Development of New Absorber Materials to Achieve Organic Photovoltaic Commercial Modules with 15% Efficiency and 20 Years Lifetime: Cooperative Research and Development Final Report, CRADA Number CRD-12-498

    Energy Technology Data Exchange (ETDEWEB)

    Olson, D.

    2014-08-01

    Under this CRADA the parties will develop intermediates or materials that can be employed as the active layer in dye sensitized solar cells printed polymer systems, or small molecule organic photovoltaics.

  18. Equipment Loan for Concentrated PV Cavity Converter (PVCC) Research: Cooperative Research and Development Final Report, CRADA Number CRD-08-285

    Energy Technology Data Exchange (ETDEWEB)

    Netter, Judy [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-07-28

    Interest in High Concentration Photovoltaics (HCPV) for terrestrial applications has significantly grown in recent years. A major driver behind this growth trend is the availability of high efficiency multi-junction (MJ) cells that promise reliable operation under high concentrations (500 to 1000 suns). The primary impact of HCPV on the solar electricity cost is the dramatic reduction in cell cost. For terrestrial HCPV systems, operating at concentrations ≥ 500 suns, the expensive MJ cells are marginally affordable. Most recently, triple-junction test cells have achieved a conversion efficiency of over 40% under concentrated sunlight. Photovoltaic Cavity Converter (PVCC) is a multi-bandgap, high concentration PV device developed by United Innovations, Inc., under subcontract to NREL. The lateral- (2- dimensional) structure of PVCC, as opposed to vertical multi-junction (MJ) structure, helps to circumvent most of the developmental challenges MJ technology has yet to overcome. This CRADA will allow the continued development of this technology by United Innovations. This project was funded by the California Energy Commission and is the second phase of a twopart demonstration program. The key advantage of the design was the use of a PVCC as the receiver. PVCCs efficiently process highly concentrated solar radiation into electricity by recycling photons that are reflected from the surface of the cells. Conventional flat, twodimensional receivers cannot recycle photons and the reflected photons are lost to the conversion process.

  19. CRADA Final Report For CRADA NO. CR-12-006 [Operation and Testing of an SO{sub 2}-depolarized Electrolyzer (SDE) for the Purpose of Hydrogen and Sulfuric Acid Production

    Energy Technology Data Exchange (ETDEWEB)

    Summers, W. A.; Colon-Mercado, H. R.; Steimke, J. L.; Zahn, Steffen

    2014-02-24

    Over the past several years, Savannah River National Laboratory (SRNL) has led a team of collaborators under the Department of Energy’s (DOE) nuclear hydrogen production program to develop the Hybrid Sulfur (HyS) Process. HyS is a 2-step water-splitting process consisting of high temperature decomposition of sulfuric acid to generate SO{sub 2}, followed by the electrolysis of aqueous SO{sub 2} to generate hydrogen and sulfuric acid. The latter is fed back into the high temperature reactor. SRNL designed and built an SO{sub 2}-depolarized electrolyzer (SDE) and a test facility. Over 40 SDE’s were tested using different catalysts, membranes and other components. SRNL demonstrated that an SDE could be operated continuously for approximately 200 hours under certain conditions without buildup of sulfur at the SDE’s cathode, thus solving a key technical problem with SDE technology. Air Products and Chemicals, Inc. (APCI) is a major supplier of hydrogen production systems, and they have proprietary technology that could benefit from the SDE developed by SRNS, or some improved version thereof. However, to demonstrate that SRNL’s SDE is a truly viable approach to the electrolyzer design, continuous operation for far greater periods of time than 200 hours must be demonstrated, and the electrolyzer must be scaled up to greater hydrogen production capacities. SRNL and Air Products entered into a Cooperative Research and Development Agreement with the objective of demonstrating the effectiveness of the SDE for hydrogen and sulfuric acid production and to demonstrate long-term continuous operation so as to dramatically increase the confidence in the SDE design for commercial operation. SRNL prepared a detailed technical report documenting previous SDE development, including the current SDE design and operating conditions that led to the 200-hour sulfurfree testing. SRNL refurbished its single cell SDE test facility and qualified the equipment for continuous operation. A

  20. NREL and DONG Energy Collaboration for Grid Simulator Controls and Testing: Cooperative Research and Development Final Report, CRADA Number CRD-13-527

    Energy Technology Data Exchange (ETDEWEB)

    Gevorgian, Vahan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    The National Renewable Energy Laboratory (NREL) and DONG Energy are interested in collaborating for the development of control algorithms, modeling, and grid simulator testing of wind turbine generator systems involving NWTC's advanced Controllable Grid Interface (CGI). NREL and DONG Energy will work together to develop control algorithms, models, test methods, and protocols involving NREL's CGI, as well as appropriate data acquisition systems for grid simulation testing. The CRADA also includes work on joint publication of results achieved from modeling and testing efforts. Further, DONG Energy will send staff to NREL on a long-term basis for collaborative work including modeling and testing. NREL will send staff to DONG Energy on a short-term basis to visit wind power sites and participate in meetings relevant to this collaborative effort. DOE has provided NREL with over 10 years of support in developing custom facilities and capabilities to enable testing of full-scale integrated wind turbine drivetrain systems in accordance with the needs of the US wind industry. NREL currently operates a 2.5MW dynamometer and is in the processes of commissioning a 5MW dynamometer and a grid simulator (referred to as a 'Controllable Grid Interface' or CGI). DONG Energy is the market leader in offshore wind power development, with currently over 1 GW of on- and offshore wind power in operation, and 1.3 GW under construction. DONG Energy has on-going R&D projects involving high voltage DC (HVDC) transmission.

  1. Final Report of a CRADA Between Pacific Northwest National Laboratory and the Ford Motor Company (CRADA No. PNNL/265): “Deactivation Mechanisms of Base Metal/Zeolite Urea Selective Catalytic Reduction Materials, and Development of Zeolite-Based Hydrocarbon Adsorber Materials”

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Feng; Kwak, Ja Hun; Lee, Jong H.; Tran, Diana N.; Peden, Charles HF; Howden, Ken; Cheng, Yisun; Lupescu, Jason; Cavattaio, Giovanni; Lambert, Christine; McCabe, Robert W.

    2013-02-14

    the engine exhaust. For these reasons, automakers and engine manufacturers have difficulty improving their catalytic converters for meeting the stringent HC emission standards. In this collaborative program, scientists and engineers in the Institute for Integrated Catalysis at Pacific Northwest National Laboratory and at Ford Motor Company have investigated laboratory- and engine-aged SCR catalysts, containing mainly base metal zeolites. These studies are leading to a better understanding of various aging factors that impact the long-term performance of SCR catalysts and improve the correlation between laboratory and engine aging, saving experimental time and cost. We have also studied materials effective for the temporary storage of HC species during the cold-start period. In particular, we have examined the adsorption and desorption of various HC species produced during the combustion with different fuels (e.g., gasoline, E85, diesel) over potential HC adsorber materials, and measured the kinetic parameters to update Ford’s HC adsorption model. Since this CRADA has now been completed, in this final report we will provide brief summaries of most of the work carried out on this CRADA over the last several years.

  2. Biodiesel/Cummins CRADA Report

    Science.gov (United States)

    2014-07-01

    nitrile rubber , natural rubber ) that are commonly used for hoses, seals and gaskets, and may degrade them to the point where they fail. Failure can...cloud point (33.5°F for the test fuel). Gelling can be prevented through fuel management (e.g., fuel additives, shifting to a diesel/biodiesel blend ...Engineering CG Coast Guard CNG Compressed Natural Gas CO Carbon monoxide CO2 Carbon dioxide COG Course over ground CRADA Cooperative Research and

  3. Xylo-Oligosaccharide Process Development, Composition, and Techno-Economic Analysis. Cooperative Research and Development Final Report, CRADA Number CRD-12-483

    Energy Technology Data Exchange (ETDEWEB)

    Shekiro, Joe [National Renewable Energy Lab. (NREL), Golden, CO (United States); Elander, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    The purpose of this cooperative work agreement between General Mills Inc. (GMI) and NREL is to determine the feasibility of producing a valuable food ingredient (xylo-oligosaccharides or XOS), a highly soluble fiber material, from agricultural waste streams, at an advantaged cost level relative to similar existing ingredients. The scope of the project includes pilot-scale process development (Task 1), compositional analysis (Task 2), and techno-economic analysis (Task 3).

  4. Solar Technology Validation Project - Hualapai Valley Solar (Met Station): Cooperative Research and Development Final Report, CRADA Number CRD-09-367-02

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-07-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  5. Solar Technology Validation Project - Utah State Energy Program (Met Station): Cooperative Research and Development Final Report, CRADA Number CRD-09-367-09

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  6. Solar Technology Validation Project - Southwest Solar (Met Station): Cooperative Research and Development Final Report, CRADA Number CRD-09-367-08

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  7. Solar Technology Validation Project - Tri-State G&T: Cooperative Research and Development Final Report, CRADA Number CRD-09-367-12

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2013-08-01

    Under this Agreement, NREL will work with Participant to improve concentrating solar power system performance characterizations. This work includes, but is not limited to, research and development of methods for acquiring renewable resource characterization information using site-specific measurements of solar radiation and meteorological conditions; collecting system performance data; and developing tools for improving the design, installation, operation, and maintenance of solar energy conversion systems. This work will be conducted at NREL and Participant facilities.

  8. Collaborative Research and Development by EpiSolar and NREL of Processes and Materials for Flexible CdS/CdTe Superstrate Devices: Cooperative Research and Development Final Report, CRADA Number CRD-14-550

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, Teresa [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    The objective of this work is to collaborate with EpiSolar to develop and test processes that are consistent with the goals and milestones of an NREL FPace1 (Foundational Program to Advance Cell Efficiency) project entitled 'High-Temperature, Roll-to-Roll (RTR) CdTe Superstrate Devices Using Flexible Glass.' The primary milestone for this CRADA relates to demonstration of a 15% efficient laboratory device.

  9. Solar Resource Measurements in Cocoa, Florida (FSEC) - Equipment Loaned to NREL: Cooperative Research and Development Final Report, CRADA Number CRD-08-318

    Energy Technology Data Exchange (ETDEWEB)

    Stoffel, T.; Afshin, A.

    2014-01-01

    Site-specific measurements of global and diffuse solar irradiance components, passively separated by alternate shading and unshading of a pyranometer mounted under a shading band with alternating opaque and open panels (for a site other than NREL) are needed to verify the underlying theory and mathematical techniques for developing direct, global and diffuse renewable resource data from such a system. These data are used for several research and development activities consistent with the NREL mission: Establish a national 30-year climatological database of measured solar irradiances; Support development of radiative transfer models for estimating solar irradiance from available meteorological observations; Provide solar resource information needed for technology deployment and operations. NREL will provide the supporting equipment (Shadow Bank Stand) for the specially designed shading band. FSEC will provide the calibrated pyranometer and perform data acquisition of the radiometer signal. Data acquired under this agreement will be shared with the NREL Principle Investigator for the purposes of validating techniques for estimating direct radiation from global and diffuse components measured with the ZEBRA system.

  10. Columbia River System Operation Review : Final Environmental Impact Statement, Appendix R: Pacific Northwest Coordination agreement (PNCA).

    Energy Technology Data Exchange (ETDEWEB)

    Columbia River System Operation Review (U.S.)

    1995-11-01

    Currently, the Federal government coordinates the planning and operation of the Federal Columbia River Power System (FCRPS) with projects owned and operated by the region`s non-Federal hydrogenerating utilities pursuant to the Pacific North-west Coordination Agreement (PNCA). The Bureau of Reclamation (Reclamation), the Corps of Engineers (Corps), and the Bonneville Power Administration (BPA) are parties to the PNCA on behalf of the government of the United States. The PNCA is a complex agreement that provides an opportunity for the region`s power producers to maximize the power system`s reliability and economy while meeting their multiple-use objectives. The PNCA does not dictate the operation of the resources it coordinates. It is essentially an accounting mechanism that exchanges the power produced among the parties in order to improve the reliability of the system and reduce regional power costs. Project owners retain complete autonomy to operate as needed to meet their multiple-use requirements. The PNCA was executed in 1964 as an important component of regional plans to maximize the Northwest`s hydro resource capability. Maximization also included the development of storage projects on the Columbia River in Canada pursuant to the terms of the 1964 Columbia River Treaty. Because of the link between power coordination and Treaty issues, the current parties to the PNCA, currently are contemplating entering into a replacement or renewed power coordination agreement. Because the power coordination agreement is a consensual arrangement, its ultimate provisions must be acceptable to all of its signatories. This Appendix R to the Final Environmental Impact Statement of the Columbia River System is a presentation of the Pacific North-west Coordination Agreement.

  11. 78 FR 52941 - Cooperative Research and Development Agreement: Next Generation Arctic Navigational Safety...

    Science.gov (United States)

    2013-08-27

    ... SECURITY Coast Guard Cooperative Research and Development Agreement: Next Generation Arctic Navigational... Agreement (CRADA) with Marine Exchange of Alaska (MXAK) to develop, demonstrate, and evaluate, in an operational setting, at least one promising technology approach to the ``Next Generation Arctic...

  12. Rapid Response Manufacturing (RRM). Final CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1997-08-28

    A major accomplishment of the Rapid Response Manufacturing (RRM) project was the development of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined part products. Key components of the framework are a manufacturing model that integrates product and process data in a consistent, minimally redundant manner, an advanced computer-aided engineering working environment, knowledge-based software systems for design, process planning, and manufacturing and new production technologies for making products directly from design application software.

  13. Robust Technique for Measuring and Simulating Silicon Wafer Quality Characteristics that Enable the Prediction of Solar Cell Electrical Performance of MEMC Silicon Wafer. Cooperative Research and Development Final Report, CRADA Number CRD-11-438

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, Bhushan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    NREL and MEMC Electronic Materials are interested in developing a robust technique for monitoring material quality of mc-Si and mono-Si wafers -- a technique that can provide relevant data to accurately predict the performance of solar cells fabricated on them. Previous work, performed under two TSAs between NREL and MEMC, has established that dislocation clusters are the dominant performance-limiting factor in MEMC mc-Si solar cells. The work under this CRADA will go further in verifying these results on a larger data set, evaluate possibilities of faster method(s) for mapping dislocations in wafers/ingots, understanding dislocation generation during ingot casting, and helping MEMC to have an internal capability for basic characterization that will provide feedback needed for more accurate crystallization simulations. NREL has already developed dislocation mapping technique and developed a basic electronic model (called Network Model) that uses spatial distribution of dislocations to predict the cell performance. In this CRADA work, we will use these techniques to: (i) establish dislocation, grain size, and grain orientation distributions of the entire ingots (through appropriate DOE) and compare these with theoretical models developed by MEMC, (ii) determine concentrations of some relevant impurities in selected wafers, (iii) evaluate potential of using photoluminescence for dislocation mapping and identification of recombination centers, (iv) evaluate use of diode array analysis as a detailed characterization tool, and (v) establish dislocation mapping as a wafer-quality monitoring tool for commercial mc-Si production.

  14. Final Technical Report - SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Schnack, Dalton D.

    2012-07-01

    Final technical report for research performed by Dr. Thomas G. Jenkins in collaboration with Professor Dalton D. Schnack on SciDAC Cooperative Agreement: Center for Wave Interactions with Magnetohydrodyanics, DE-FC02-06ER54899, for the period of 8/15/06 - 8/14/11. This report centers on the Slow MHD physics campaign work performed by Dr. Jenkins while at UW-Madison and then at Tech-X Corporation. To make progress on the problem of RF induced currents affect magnetic island evolution in toroidal plasmas, a set of research approaches are outlined. Three approaches can be addressed in parallel. These are: (1) Analytically prescribed additional term in Ohm's law to model the effect of localized ECCD current drive; (2) Introduce an additional evolution equation for the Ohm's law source term. Establish a RF source 'box' where information from the RF code couples to the fluid evolution; and (3) Carry out a more rigorous analytic calculation treating the additional RF terms in a closure problem. These approaches rely on the necessity of reinvigorating the computation modeling efforts of resistive and neoclassical tearing modes with present day versions of the numerical tools. For the RF community, the relevant action item is - RF ray tracing codes need to be modified so that general three-dimensional spatial information can be obtained. Further, interface efforts between the two codes require work as well as an assessment as to the numerical stability properties of the procedures to be used.

  15. CRADA opportunities in pressurized combustion research

    Energy Technology Data Exchange (ETDEWEB)

    Maloney, D.J.; Norton, T.S.; Casleton, K.H.

    1995-06-01

    The Morgantown Energy Technology Center recently began operation of a Low Emissions Combustor Test and Research (LECTR) Facility. This facility was built to support the development of Advanced Gas Turbine Systems (ATS) by providing test facilities and engineering support to METC customers through the ATS University-Industry Consortium and through CRADA participation with industrial partners.

  16. University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

    Energy Technology Data Exchange (ETDEWEB)

    Driscoll, Frederick R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation system and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.

  17. CRADA Final Report for CRADA Number NFE-08-01671 Materials for Advanced Turbocharger Designs

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, P. J. [ORNL; Wilson, M. [Honeywell

    2014-11-28

    Results were obtained on residual stresses in the weld of the steel shaft to the Ni-based superalloy turbine wheel for turbochargers. Neutron diffraction studies at the HFIR Residual Stress Facility showed asymmetric tensile stresses after electron-beam welding of the wheel and shaft. A post-weld heat-treatment was found to relieve and reduce the residual stresses. Results were also obtained on cast CF8C-Plus steel as an upgrade alternative to cast irons (SiMo, Ni-resist) for higher temperature capability and performance for the turbocharger housing. CF8C-Plus steel has demonstrated creep-rupture resistance at 600-950oC, and is more creep-resistant than HK30Nb, but lacks oxidation-resistance at 800oC and above in 10% water vapor. New modified CF8C-Plus Cu/W steels with Cr and Ni additions show better oxidation resistance at 800oC in 10% water vapor, and have capability to higher temperatures. For automotive gasoline engine turbocharger applications, higher temperatures are required, so at the end of this project, testing began at 1000oC and above.

  18. Licensing and {open_quotes}CRADA`s{close_quotes} in Oak Ridge technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Prosser, G.A.

    1993-10-01

    In the belief that effective technology transfer is a ``contact sport,`` Martin Marietta Energy Systems (Energy Systems), the Department of Energy`s (DOE`s) management contractor in Oak Ridge, Tennessee, encourages its research and engineering employees to directly interact with their commercial-sector counterparts. Over the years, relationships which have been initiated through such technical interactions have led to many of the patent licenses ad cooperative research and development agreements (CRADAs) which currently exist among Energy Systems, US companies, universities, and industrial consortia. The responsibility for creating and implementing Energy Systems policies and procedures to accomplish DOE`s technology transfer objectives in Oak Ridge lies with the Office of Technology Transfer (OTT). In addition, licensing executives within OTT are responsible for negotiating the terms and conditions of patent licenses and CRADAs for the commercialization of government-funded technologies and research expertise. Other technology transfer initiatives in Oak Ridge help companies in a wide range of industries overcome manufacturing obstacles, enabling them to retain existing jobs and to create new business opportunities.

  19. Cost Effective Bioethanol via Acid Pretreatment of Corn Stover, Saccharification, and Conversion via a Novel Fermentation Organism: Cooperative Research and Development Final Report, CRADA Number: CRD-12-485

    Energy Technology Data Exchange (ETDEWEB)

    Dowe, N.

    2014-05-01

    This research program will convert acid pretreated corn stover to sugars at the National Renewable Energy Laboratory (NREL) and then transfer these sugars to Honda R&D and its partner the Green Earth Institute (GEI) for conversion to ethanol via a novel fermentation organism. In phase one, NREL will adapt its pretreatment and saccharification process to the unique attributes of this organism, and Honda R&D/GEI will increase the sugar conversion rate as well as the yield and titer of the resulting ethanol. In later phases, NREL, Honda R&D, and GEI will work together at NREL to optimize and scale-up to pilot-scale the Honda R&D/GEI bioethanol production process. The final stage will be to undertake a pilot-scale test at NREL of the optimized bioethanol conversion process.

  20. Cooperative research and development agreements at METC

    Energy Technology Data Exchange (ETDEWEB)

    Ludlow, J.C.; Jarr, L.A.; Anderson, R.J.

    1995-06-01

    The Federal Technology Transfer Act of 1986 (P.L. 99-502) provided a new mechanism for joint research between private parties and the Morgantown Energy Technology Center (METC). Joint projects under this law are called Cooperative Research And Development Agreements (CRADAs) and are simply agreements between METC and the private sector to work together on a mutually beneficial project. Of primary interest to METC is the development and deployment of: (1) clean, efficient power generation technologies, (2) technologies for the characterization and exploitation of the Nation`s natural gas resource, and (3) environmental remediation technologies.

  1. Li-FSI Impurity Impact Study: Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Pupek, Krzysztof [Argonne National Lab. (ANL), Argonne, IL (United States); Dzwiniel, Trevor [Argonne National Lab. (ANL), Argonne, IL (United States); Krumdick, Gregory [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    There is growing interest in lithium bis(fluorosulfonyl)imide (LiFSI ) as an alternative to LiPF6 and as an additive to electrolytes used in lithium-ion cells. LiFSI has attracted attention because it is reported to have higher ionic conductivity, better high temperature stability, and enhanced stability toward hydrolysis, Also, LiFSI additive to electrolytes can bring benefits of improved storage properties and reduced gas evolution in the cells. Different levels of different electrochemically active impurities could affect the performance of LiFSI as an electrolyte salt for Li-ion batteries, generating inconsistent and conflicting interpretations of the experimental data.

  2. Electron Beam Curing of Polymer Matrix Composites - CRADA Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Janke, C. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Dave [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Norris, Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1997-05-01

    The major cost driver in manufacturing polymer matrix composite (PMC) parts and structures, and one of the elements having the greatest effect on their quality and performance, is the standard thermal cure process. Thermal curing of PMCs requires long cure times and high energy consumption, creates residual thermal stresses in the part, produces volatile toxic by-products, and requires expensive tooling that is tolerant of the high cure temperatures.

  3. Ground penetrating radar mini-CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, R. [AlliedSignal, Inc., Kansas City, MO (United States). Federal Mfg. and Technologies; Stump, G. [Vermeer Mfg. Co. (United States); Weil, G. [EnTech Engineering, Inc. (United States)

    1996-09-01

    The purpose of this project was to determine the feasibility of using ground penetrating radar (GPR) to assess the ease of excavability prior to and during trenching operations. The project partners were EnTech Engineering Inc., Vermeer Manufacturing Co., and AlliedSignal Federal Manufacturing & Technology (FM&T)/Kansas City Plant (KCP). Commercial GPRs were field tested as well as a system developed at AlliedSignal FM&T. The AlliedSignal GPR was centered around a HP8753 Network Analyzer instrument. Commercial GPR antennas were connected to the analyzer and data was collected under control of software written for a notebook PC. Images of sub-surface features were generated for varied system parameters including: frequency, bandwidth, FFT windowing, gain, antenna orientation, and surface roughness conditions. Depths to 10 feet were of primary interest in this project. Although further development is required, this project has demonstrated that GPR can be used to identify transitions between different sub-surface conditions, as in going from one rock type to another. Additionally, the average relative dielectric constant of the material can be estimated which can be used to help identify the material. This information can be used to characterize an excavation site for use in budgeting a job. A real-time GPR would provide the operator with sub-surface images that could help with setting the optimum feed and speed rates of the trenching machine.

  4. Intermetallic blades for fabric cutting. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Blue, C.A.; Sklad, S. [Oak Ridge National Lab., TN (United States); Shih, H.R. [Jackson State Univ., MS (United States); Off, J.W.A. [Textile/Clothing Technology Corp., Cary, NC (United States)

    1998-08-01

    This report describes the evaluation of nickel- and iron-aluminide blades for cutting fabric as opposed to conventional steel blades. The aluminides were selected as blade material because of their extremely high work-hardening rate and the possibility of forming aluminum oxide on the surface to further enhance the wear resistance. Unlike steel blades, they do not require heat treating to become strong. A testing facility using an Eastman cutter was designed and built at the Oak Ridge National Laboratory (ORNL) for testing of blades. Denim fabric supplied by Levi Strauss was used. For lack of sufficient fabric, heavy paper was also used. Extensive testing revealed that there were several issues in getting the true comparison between various blades. The most important issue was the consistent sharpening of the blade edge. With all of the effort and precautions, identical edges could not be put on the blades of all the different materials. The second issue was the limited availability of fabric to evaluate the end-of-life limit for the blade edges. Two nickel- and three iron-aluminide compositions were evaluated. Under test conditions, the iron-aluminide alloy (PM-60), based on FeAl, was found to outperform other aluminides and the steel blade. Based on the data presented in this report, the authors recommend that additional testing be carried out on both the steel and aluminide blades to determine the number of times each blade can be sharpened prior to its replacement. However, the recommended testing needs to be conducted on blades for which the identical cutting edges and sharpening are incorporated. They further recommend that if the iron-aluminide blade is truly superior, a cost analysis be performed to determine its commercial feasibility. The best aluminide blades should be tested by commercial textile companies.

  5. CRADA Final Report, 2011S003, Faraday Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Faraday Technologies

    2012-12-12

    This Phase I SBIR program addressed the need for an improved manufacturing process for electropolishing niobium RF superconducting cavities for the International Linear Collider (ILC). The ILC is a proposed particle accelerator that will be used to gain a deeper understanding of the forces of energy and matter by colliding beams of electrons and positrons at nearly the speed of light. The energy required for this to happen will be achieved through the use of advanced superconducting technology, specifically ~16,000 RF superconducting cavities operating at near absolute zero. The RF superconductor cavities will be fabricated from highly pure Nb, which has an extremely low surface resistance at 2 Kelvin when compared to other materials. To take full advantage of the superconducting properties of the Nb cavities, the inner surface must be a) polished to a microscale roughness < 0.1 µm with removal of at least 100 µm of material, and b) cleaned to be free of impurities that would degrade performance of the ILC. State-of-the-art polishing uses either chemical polishing or electropolishing, both of which require hydrofluoric acid to achieve breakdown of the strong passive film on the surface. In this Phase I program, Faraday worked with its collaborators at the Thomas Jefferson National Accelerator Facility (JLab) to demonstrate the feasibility of an electropolishing process for pure niobium, utilizing an environmentally benign alternative to chemical or electrochemical polishing electrolytes containing hydrofluoric acid. Faraday utilized a 31 wt% aqueous sulfuric acid solution (devoid of hydrofluoric acid) in conjunction with the FARADAYICSM Process, which uses pulse/pulse reverse fields for electropolishing, to demonstrate the ability to electropolish niobium to the desired surface finish. The anticipated benefits of the FARADAYICSM Electropolishing process will be a simpler, safer, and less expensive method capable of surface finishing high purity niobium cavities. Another potential benefit would be for the medical industry that uses hydrofluoric acid to electropolish niobium-alloy materials. The FARADAYICSM Electropolishing process will eliminate the environmental hazards posed by the use of hydrofluoric acid employed by chemical polishing and conventional electropolishing. Further, improved performance benefits may be possible. The overall objective of the Phase I program was to demonstrate that FARADAYIC Electropolishing of niobium cavities in electrolytes free of hydrofluoric acid can meet the RF superconducting performance criteria of those cavities. The FARADAYIC Electropolishing Process developed in the Phase I program was used to polish 50 mm Nb disks to a surface roughness (RA) of < 1 nm over a small area through process and post-processing optimization. An excellent level of surface cleanliness was achieved. While the desired 2K RF performance has not yet been achieved, Faraday believes that surface oxide state can be controlled through manipulation of the process parameters, to meet the 2K RF standard. Faraday is establishing apparatus and facilities infrastructure for single-cell SRF cavity electropolishing, through a synergistic effort with the Fermi National Accelerator Facility (Fermilab) to scale-up electropolishing of superconducting RF cavities. Faraday proposes to commercialize the subject technology via an IP based strategic relationship with a partner with established market channels within two primary commercialization avenues: 1) the superconducting particle accelerator community, 2) the medical device and implant market. Faraday will initially maintain Low Rate Initial Production capabilities for an application, but latterly seek a strategic partner who is solely dedicated to high rate production.

  6. Inflammatory bowel disease gene discovery. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-09

    The ultimate goal of this project is to identify the human gene(s) responsible for the disorder known as IBD. The work was planned in two phases. The desired products resulting from Phase 1 were BAC clone(s) containing the genetic marker(s) identified by gene/Networks, Inc. as potentially linked to IBD, plasmid subclones of those BAC(s), and new genetic markers developed from these plasmid subclones. The newly developed markers would be genotyped by gene/Networks, Inc. to ascertain evidence for linkage or non-linkage of IBD to this region. If non-linkage was indicated, the project would move to investigation of other candidate chromosomal regions. Where linkage was indicated, the project would move to Phase 2, in which a physical map of the candidate region(s) would be developed. The products of this phase would be contig(s) of BAC clones in the region exhibiting linkage to IBD, as well as plasmic subclones of the BACs and further genetic marker development. There would also be continued genotyping with new polymorphic markers during this phase. It was anticipated that clones identified and developed during these two phases would provide the physical resources for eventual disease gene discovery.

  7. CRADA Final Report: Mucin Mimic and Glycopeptide Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Bertozzi, Carolyn R.

    2002-10-22

    Mucus has several constituents but the most important are the mucins, heavily O-glycosylated proteins characterized by long stretches of tandem repeat sequences rich in glycosylated serine and threonine residues, with N- and C-terminal domains that have determined to a large extent by the viscous and viscoelastic properties of mucin glycoproteins. Indeed, these properties are evident in reconstituted purified mucin glycoproteins. Oligomeric mucin can be deconstructed into its monomeric components and then further into the domains that comprise each mucin molecule. There are two major domain types. "Glycodomains" are defined by stretches of the tandemly repeated Thr/Ser-rich segments that bear the characteristic O-linked glycans of the mucin molecule. The goal of this project is to synthesize polymeric materials that mimic mucin glycodomains. In order to mimic the central features of mucin, these materials should have dense clusters of glycans that bear a similar structure to those found in native mucins, and a fairly rigid polymer backbone. Four different polymers bearing ketone groups for the attachment of sugars were synthesized. GalNAc{alpha}-ONH{sub 2} and Sia{alpha}2,6GaINAc{alpha}·ONH{sub 2} both of which could be ligated to the polymer scaffolds were synthesized. Mucin glycodomain mimics were successfully synthesized by ligation of glycans to polymers.

  8. CRADA opportunities with METC`s gasification and hot gas cleanup facility

    Energy Technology Data Exchange (ETDEWEB)

    Galloway, E.N.; Rockey, J.M.; Tucker, M.S.

    1995-06-01

    Opportunities exist for Cooperative Research and Development Agreements (CRADA) at the Morgantown Energy Technology Center (METC) to support commercialization of IGCC power systems. METC operates an integrated gasifier and hot gas cleanup facility for the development of gasification and hot gas cleanup technologies. The objective of our program is to gather performance data on gasifier operation, particulate removal, desulfurization and regeneration technologies. Additionally, slip streams are provided for developing various technologies such as; alkali monitoring, particulate measuring, chloride removal, and contaminate recovery processes. METC`s 10-inch diameter air blown Fluid Bed Gasifier (FBG) provides 300 lb/hr of coal gas at 1100{degrees}F and 425 psig. The particulate laden gas is transported to METC`s Modular Gas Cleanup Rig (MGCR). The gas pressure is reduced to 285 psig before being fed into a candle filter vessel. The candle filter vessel houses four candle filters and multiple test coupons. The particulate free gas is then desulfurized in a sorbent reactor. Starting in 1996 the MGCR system will be able to regenerate the sorbent in the same vessel.

  9. CRADA final report for CRADA number C/Y-1203-0211, gelcasting of soft ferrite parts

    Energy Technology Data Exchange (ETDEWEB)

    Omatete, O.O. [Oak Ridge National Lab., TN (United States); Van Dillen, G.L., Jr. [Ceramic Magnetics, Inc., Fairfield, NJ (United States)

    1996-03-01

    Soft ferrite parts utilized in areas such as high-energy physics have been successfully gelcast from powders supplied by the industrial partner. To achieve this, several modifications were necessary. First, the as-received ferrite powder was heated to 300, 500 or 800{degrees}C. X-ray analysis showed no changes in the crystal structure of the heat-treated powder even at 800{degrees}C, and particle size distribution and surface area analyses indicated that powders heat treated at 300 and 500{degrees} had mean size and surface area similar to those of the as-received powder. Second, to prevent the parts from shattering during the combined binder burn-off and sintering cycle, the solids loading of the gelcasting slurry was adjusted from 42 vol % to at least 50 vol % and the sintering schedule was modified slightly. These modifications resulted in the production of fired gelcast soft ferrite parts (50 mm {times} 13 mm pucks, {approximately} 125 mm OD {times} 100 mm ID {times} 25 mm rings) which sintered to {approximately}98% of the theoretical density. The partner was satisfied with the parts it received and has discussed pursuing follow-up activities in order to gelcast more complex shapes and large toroids.

  10. 78 FR 42532 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Science.gov (United States)

    2013-07-16

    ...: Science and Technology Directorate, Plum Island Animal Disease Center, Department of Homeland Security. ACTION: Notice of intent; correction. SUMMARY: The Department of Homeland Security Science and Technology Directorate (DHS S&T), through its Plum Island Animal Disease Center (PIADC), published a document in...

  11. 78 FR 28866 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Science.gov (United States)

    2013-05-16

    ... Security for the Development of a Foot-and-Mouth Disease 3ABC ELISA Diagnostic Kit AGENCY: Science and Technology Directorate, Plum Island Animal Disease Center, Department of Homeland Security. ACTION: Notice of intent. SUMMARY: The Department of Homeland Security Science and Technology Directorate (DHS...

  12. 77 FR 48165 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Science.gov (United States)

    2012-08-13

    ... health concerns and process efficiency/turn-around time with the use of formaldehyde gas (the current... decontaminated using a validated method prior to removal. Testing and decontamination validation will take place... response capabilities. Specifically, DHS S&T is interested in validated alternatives to...

  13. 78 FR 57401 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

    Science.gov (United States)

    2013-09-18

    ...--Federal Air Marshal Service, Department of Homeland Security. ACTION: Notice of intent. SUMMARY: The... the Transportation Security Administration/Office of Law Enforcement-- Federal Air Marshal Service... preparing dogs for consignment evaluations by TSA/OLE-FAMS, and other DHS stakeholder community...

  14. Final report for the Department of Energy funded cooperative agreement ''Electronic Research Demonstration Project'' [University electronic research administration demonstration project

    Energy Technology Data Exchange (ETDEWEB)

    Rodman, John

    1998-07-31

    This is the final report for the Department of Energy (DOE) funded cooperative agreement ''Electronic Research Demonstration Project (DE-FC02-92ER35180)'' for the period August 1994-July 1998. The goal of the project, referred to as NewERA, was to demonstrate the use of open standards for electronic commerce to support research administration, otherwise referred to as Electronic Research Administration (ERA). The NewERA demonstration project provided a means to test interagency standards developed within the Federal Grant Electronic Commerce Committee, a group comprised of federal granting agencies. The NewERA program was initiated by DOE. NewERA was comprised of three separate, but related, ERA activities in preaward administration, postaward administration, and secure Internet commerce. The goal of New ERA was to demonstrate an open standard implementation of ERA using electronic data interchange, e-mail and Internet transaction security between grant applicants and DOE, along with t h e other participating agencies.

  15. Final Project Report Project 10749-4.2.2.1 2007-2009

    Energy Technology Data Exchange (ETDEWEB)

    Zacher, Alan H.; Holladay, Johnathan E.; Frye, J. G.; Brown, Heather M.; Santosa, Daniel M.; Oberg, Aaron A.

    2009-05-11

    This is the final report for the DOE Project 10749-4.2.2.1 for the FY2007 - FY2009 period. This report is non-proprietary, and will be submitted to DOE as a final project report. The report covers activities under the DOE Project inside CRADA 269 (Project 53231) as well as project activites outside of that CRADA (Project 56662). This is the final report that is summarized from the non-proprietary quarterlies submitted to DOE over the past 2.5 years, which in turn are summaries from the proprietary technical reporting to UOP.

  16. Case Studies of integrated hydrogen systems. International Energy Agency Hydrogen Implementing Agreement, Final report for Subtask A of task 11 - Integrated Systems

    Energy Technology Data Exchange (ETDEWEB)

    Schucan, T. [Paul Scherrer Inst., Villigen PSI (Switzerland)

    1999-12-31

    Within the framework of the International Energy Agency Hydrogen Implementing Agreement, Task 11 was undertaken to develop tools to assist in the design and evaluation of existing and potential hydrogen demonstration projects. Emphasis was placed on integrated systems, from input energy to hydrogen end use. Included in the PDF document are the Executive Summary of the final report and the various case studies. The activities of task 11 were focused on near- and mid-term applications, with consideration for the transition from fossil-based systems to sustainable hydrogen energy systems. The participating countries were Canada, Italy, Japan, the Netherlands, Spain, Switzerland and the United States. In order for hydrogen to become a competitive energy carrier, experience and operating data need to be generated and collected through demonstration projects. A framework of scientific principles, technical expertise, and analytical evaluation and assessment needed to be developed to aid in the design and optimization of hydrogen demonstration projects to promote implementation. The task participants undertook research within the framework of three highly coordinated subtasks that focused on the collection and critical evaluation of data from existing demonstration projects around the world, the development and testing of computer models of hydrogen components and integrated systems, and the evaluation and comparison of hydrogen systems. While the Executive Summary reflects work on all three subtasks, this collection of chapters refers only to the work performed under Subtask A. Ten projects were analyzed and evaluated in detail as part of Subtask A, Case Studies. The projects and the project partners were: Solar Hydrogen Demonstration Project, Solar-Wasserstoff-Bayern, Bayernwerk, BMW, Linde, Siemens (Germany); Solar Hydrogen Plant on Residential House, M. Friedli (Switzerland); A.T. Stuart Renewable Energy Test Site; Stuart Energy Systems (Canada); PHOEBUS Juelich

  17. Medicare and Medicaid programs; changes in provider and supplier enrollment, ordering and referring, and documentation requirements; and changes in provider agreements. Final rule.

    Science.gov (United States)

    2012-04-27

    This final rule finalizes several provisions of the Affordable Care Act implemented in the May 5, 2010 interim final rule with comment period. It requires all providers of medical or other items or services and suppliers that qualify for a National Provider Identifier (NPI) to include their NPI on all applications to enroll in the Medicare and Medicaid programs and on all claims for payment submitted under the Medicare and Medicaid programs. In addition, it requires physicians and other professionals who are permitted to order and certify covered items and services for Medicare beneficiaries to be enrolled in Medicare. Finally, it mandates document retention and provision requirements on providers and supplier that order and certify items and services for Medicare beneficiaries.

  18. International Fisheries Agreements

    DEFF Research Database (Denmark)

    Pintassilgo, Pedro; Kronbak, Lone Grønbæk; Lindroos, Marko

    2015-01-01

    . Then, progres- sively, this cooperative approach was combined with non-cooperative elements such as the stability analysis of the agreements. Finally, partition function games, which model coalition formation endogenously, were introduced and became the standard approach to study the formation......This paper surveys the application of game theory to the economic analysis of international fisheries agreements. The relevance of this study comes not only from the existence of a vast literature on the topic but especially from the specific features of these agreements. The emphasis of the survey...... is on coalition games, an approach that has become prominent in the fisheries economics literature over the last decade. It is shown that coalition games were first applied to international fisheries agreements in the late 1990s addressing cooperative issues under the framework of characteristic function games...

  19. Agreement technologies

    CERN Document Server

    Ossowski, Sascha

    2013-01-01

    More and more transactions, whether in business or related to leisure activities, are mediated automatically by computers and computer networks, and this trend is having a significant impact on the conception and design of new computer applications. The next generation of these applications will be based on software agents to which increasingly complex tasks can be delegated, and which interact with each other in sophisticated ways so as to forge agreements in the interest of their human users. The wide variety of technologies supporting this vision is the subject of this volume. It summarises

  20. CRADA NFE-08-01456 Evaluation of Alumina-Forming Austenitic Stainless Steel Alloys in Industrial Gas Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Michael P [ORNL; Pint, Bruce A [ORNL; Unocic, Kinga A [ORNL; Yamamoto, Yukinori [ORNL; Kumar, Deepak [ORNL; Lipschutz, Mark D. [Solar Turbines, Inc.

    2011-09-01

    Oak Ridge National Laboratory (ORNL) and Solar Turbines Incorporated (Solar) participated in an in-kind cost share cooperative research and development agreement (CRADA) effort under the auspices of the Energy Efficiency and Renewable Energy (EERE) Technology Maturation Program to explore the feasibility for use of developmental ORNL alumina-forming austenitic (AFA) stainless steels as a material of construction for industrial gas turbine recuperator components. ORNL manufactured lab scale foil of three different AFA alloy compositions and delivered them to Solar for creep properties evaluation. One AFA composition was selected for a commercial trial foil batch. Both lab scale and the commercial trial scale foils were evaluated for oxidation and creep behavior. The AFA foil exhibited a promising combination of properties and is of interest for future scale up activities for turbine recuperators. Some issues were identified in the processing parameters used for the first trial commercial batch. This understanding will be used to guide process optimization of future AFA foil material production.

  1. Upgrading of Venezuelan heavy crude. Continuation of the Orinoco feasibility study within the Venezuelan-German Agreement (Annex IIIB). Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gonzales, M.; Lezuo, A.; Kastner, W.; Kuenstle, K.; Ostendorf, F.J.; Reiter, K.; Rodriguez, J.; Thelen, H.J.

    1989-06-01

    Within the framework of the Venezuelan-German Agreement, Annex 3B, the following projects were performed under the responsibility of Siemens, KWU-Group. Project No. 5: Development of a mathematical model for the design and simulation of field-scale systems for the distribution of two-phase water-steam mixtures. The model has been verified in a test rig under field conditions. Project No. 6: Investigation of different steam generating systems for the production of supercritical injection steam from water of varying quality for deep oil reservoirs and investigation of the effect on oil yield and cost-effectiveness. Project No. 9: Investigation of possible improvement to achieve more efficient fuel utilization by increasing the efficiency and availability of different facilities in the Lake Maracaibo area and economic evaluation. (orig.) With 28 refs., 2 tabs., 16 figs.

  2. Medicare and Medicaid programs; changes in provider and supplier enrollment, ordering and referring, and documentation requirements; and changes in provider agreements. Interim final rule with comment period.

    Science.gov (United States)

    2010-05-05

    This interim final rule with comment period implements several provisions set forth in the Patient Protection and Affordable Care Act (Affordable Care Act). It implements the provision which requires all providers of medical or other items or services and suppliers that qualify for a National Provider Identifier (NPI) to include their NPI on all applications to enroll in the Medicare and Medicaid programs and on all claims for payment submitted under the Medicare and Medicaid programs. This interim final rule with comment period also requires physicians and eligible professionals to order and refer covered items and services for Medicare beneficiaries to be enrolled in Medicare. In addition, it adds requirements for providers, physicians, and other suppliers participating in the Medicare program to provide documentation on referrals to programs at high risk of waste and abuse, to include durable medical equipment, prosthetics, orthotics and supplies (DMEPOS), home health services, and other items or services specified by the Secretary.

  3. Data Intensive Scientific Workflows on a Federated Cloud: CRADA Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Garzoglio, Gabriele [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2015-10-31

    The Fermilab Scientific Computing Division and the KISTI Global Science Experimental Data Hub Center have built a prototypical large-scale infrastructure to handle scientific workflows of stakeholders to run on multiple cloud resources. The demonstrations have been in the areas of (a) Data-Intensive Scientific Workflows on Federated Clouds, (b) Interoperability and Federation of Cloud Resources, and (c) Virtual Infrastructure Automation to enable On-Demand Services.

  4. Liquid Organic Battery Development: Cooperative Research and Development Final Report, CRADA Number CRD-14-540

    Energy Technology Data Exchange (ETDEWEB)

    Santhanagopalan, Shriram [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-08-01

    Battery electric vehicles (BEV) have the potential to significantly reduce consumption of gasoline and emission of greenhouse gases. However, the commercial success of mass-market, long-range BEVs requires battery technology with a challenging combination of technical metrics -- specific energy, safety, fast recharge capability, cycle life, and cost. The NREL team proposes a robust, liquid-phase battery design utilizing a high-energy organic redox couple capable of decoupling these metrics via electrode exchange to provide the necessary combination of performance characteristics. The overall objective of this project is to demonstrate a functioning prototype and determine its ability to meet RANGE performance targets in large-scale production. Three main tasks described below will work towards this goal with the individual objectives of (1) identifying a robust, high-performance redox couple-solvent-additive combination, (2) designing and demonstrating a functional cell, and (3) analyzing the concept's potential performance and cost in future mass-production scenarios.

  5. Algae Biofuels Collaborative Project: Cooperative Research and Development Final Report, CRADA Number CRD-10-371

    Energy Technology Data Exchange (ETDEWEB)

    French, R. J.

    2012-04-01

    The goal of this project is to advance biofuels research on algal feedstocks and NREL's role in the project is to explore novel liquid extraction methods, gasification and pyrolysis as means to produce fuels from algae. To that end several different extraction methods were evaluated and numerous gasification and pyrolysis conditions were explored. It was found that mild hydrothermal treatment is a promising means to improve the extraction and conversion of lipids from algae over those produced by standard extraction methods. The algae were essentially found to gasify completely at a fairly low temperature of 750 degrees C in the presence of oxygen. Pyrolysis from 300-550 degrees C showed sequential release of phytene hydrocarbons, glycerides, and aromatics as temperature was increased. It appears that this has potential to release the glycerides from the non-fatty acid groups present in the polar lipids to produce a cleaner lipid. Further research is needed to quantify the pyrolysis and gasification yields, analyze the liquids produced and to test strategies for removing organic-nitrogen byproducts produced because of the high protein content of the feed. Possible strategies include use of high-lipid/low-protein algae or the use of catalytic pyrolysis.

  6. Winnebago Resource Study. Cooperative Research and Development Final Report, CRADA Number CRD-09-329

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Robichaud, R. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-03-01

    Since 2005 the NREL Native American Tall Tower Loan program has assisted Native American tribes to assess their wind resource by lending tall (30m - 50m) anemometer. This program has allowed tribes a lower risk way to gather financeable wind data for potential utility scale wind energy projects. These projects offer Tribes a significant economic development opportunity.

  7. Tosoh SMD, Inc./Production of High-Quality Tantalum: Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Ehst, David A. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-10-26

    The objectives of the proposed program are: (1) to produce Ta ingot with very high purity (> 99.99% overall, with ppm-level allowable for specific impurity elements); and (2) to provide requisite grain structure in the ingot with special metallurgical processing. We believe this research and development has a high potential to keep Tosoh competitive as the future continues to demand better performance from sputtering sources. We encourage further R&D activities and are looking forward to continued interaction.

  8. Evaluation of Hydrogen Sensors: Cooperative Research and Development Final Report, CRADA Number CRD-14-547

    Energy Technology Data Exchange (ETDEWEB)

    Buttner, William [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    In preparation for the projected 2015 release of commercial hydrogen fuel cell vehicles, KPA has been contracted by Toyota Motors to develop a hydrogen safety system for vehicle repair facilities. Repair facility safety designs will include hydrogen sensors. KPA will identify critical sensor specifications for vehicle repair facilities. In collaboration with NREL, KPA will select and purchase commercial hydrogen sensors that meet or nearly meet requirements for deployment in vehicle repair facility. A two-phase field deployment plan to verify sensor performance has been developed.

  9. Biochemical basis of drought tolerance in hybrid Populus grown under field production conditions. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Tschaplinski, T.J.; Tuskan, G.A. [Oak Ridge National Lab., TN (United States); Wierman, C. [Boise Cascade Corp., Wallula, WA (United States)

    1997-04-01

    The purpose of this cooperative effort was to assess the use of osmotically active compounds as molecular selection criteria for drought tolerance in Populus in a large-scale field trial. It is known that some plant species, and individuals within a plant species, can tolerate increasing stress associated with reduced moisture availability by accumulating solutes. The biochemical matrix of such metabolites varies among species and among individuals. The ability of Populus clones to tolerate drought has equal value to other fiber producers, i.e., the wood products industry, where irrigation is used in combination with other cultural treatments to obtain high dry weight yields. The research initially involved an assessment of drought stress under field conditions and characterization of changes in osmotic constitution among the seven clones across the six moisture levels. The near-term goal was to provide a mechanistic basis for clonal differences in productivity under various irrigation treatments over time.

  10. Carbon-carbon composites for orthopedic prosthesis and implants. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Burchell, T D; Klett, J W; Strizak, J P [Oak Ridge National Lab., TN (United States); Baker, C [FMI, Biddeford, ME (United States)

    1998-01-21

    The prosthetic implant market is extensive. For example, because of arthritic degeneration of hip and knee cartilage and osteoporotic fractures of the hip, over 200,000 total joint replacements (TJRs) are performed in the United States each year. Current TJR devices are typically metallic (stainless steel, cobalt, or titanium alloy) and are fixed in the bone with polymethylacrylate (PMMA) cement. Carbon-carbon composite materials offer several distinct advantages over metals for TJR prosthesis. Their mechanical properties can be tailored to match more closely the mechanical properties of human bone, and the composite may have up to 25% porosity, the size and distribution of which may be controlled through processing. The porous nature of carbon-carbon composites will allow for the ingrowth of bone, achieving biological fixation, and eliminating the need for PMMA cement fixation.

  11. Ozone/UV treatment to enhance biodegradation of surfactants in industrial wastewater. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Cline, J.E. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Sullivan, P.F. [Specialty Industrial Products, Inc., Spartanburg, SC (United States); Lovejoy, M.A.; Collier, J. [Sun River Innovations, Ltd., Lexington, KY (United States); Adams, C.D. [Univ. of Missouri, Rolla, MO (United States)

    1996-10-01

    The new owners of a surfactant manufacturing plant wanted to triple production but were limited by the plant`s wastewater treatment capacity. Mass balance calculations indicated that little aerobic biodegradation was occurring in the plant`s wastewater treatment system. Literature reviews and laboratory tests confirmed that as much as 60% of the plant`s products might resist aerobic biodegradation. Overall chemical losses, both solid and aqueous, were estimated at 3.8% of theoretical. Organic loadings to the wastewater treatment system were 170 kg/d of which 50 kg/d reached the biological treatment system. Pollution prevention measures have allowed a > 20% increase in production levels with a > 30% decrease in effluent volume and no increase in discharge of chemical oxygen demand (COD). A new dissolved air flotation (DAF) system removes 70% of the organic loading. Sludge volumes are lower by an order of magnitude than with the clarifier/drum-filter process it replaced.

  12. Scaleable production and separation of fermentation-derived acetic acid. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Snyder, S. W.; Energy Systems

    2010-02-08

    Half of U.S. acetic acid production is used in manufacturing vinyl acetate monomer (VAM) and is economical only in very large production plants. Nearly 80% of the VAM is produced by methanol carbonylation, which requires high temperatures and exotic construction materials and is energy intensive. Fermentation-derived acetic acid production allows for small-scale production at low temperatures, significantly reducing the energy requirement of the process. The goal of the project is to develop a scaleable production and separation process for fermentation-derived acetic acid. Synthesis gas (syngas) will be fermented to acetic acid, and the fermentation broth will be continuously neutralized with ammonia. The acetic acid product will be recovered from the ammonium acid broth using vapor-based membrane separation technology. The process is summarized in Figure 1. The two technical challenges to success are selecting and developing (1) microbial strains that efficiently ferment syngas to acetic acid in high salt environments and (2) membranes that efficiently separate ammonia from the acetic acid/water mixture and are stable at high enough temperature to facilitate high thermal cracking of the ammonium acetate salt. Fermentation - Microbial strains were procured from a variety of public culture collections (Table 1). Strains were incubated and grown in the presence of the ammonium acetate product and the fastest growing cultures were selected and incubated at higher product concentrations. An example of the performance of a selected culture is shown in Figure 2. Separations - Several membranes were considered. Testing was performed on a new product line produced by Sulzer Chemtech (Germany). These are tubular ceramic membranes with weak acid functionality (see Figure 3). The following results were observed: (1) The membranes were relatively fragile in a laboratory setting; (2) Thermally stable {at} 130 C in hot organic acids; (3) Acetic acid rejection > 99%; and (4) Moderate ammonia flux. The advantages of producing acetic acid by fermentation include its appropriateness for small-scale production, lower cost feedstocks, low energy membrane-based purification, and lower temperature and pressure requirements. Potential energy savings of using fermentation are estimated to be approximately 14 trillion Btu by 2020 from a reduction in natural gas use. Decreased transportation needs with regional plants will eliminate approximately 200 million gallons of diesel consumption, for combined savings of 45 trillion Btu. If the fermentation process captures new acetic acid production, savings could include an additional 5 trillion Btu from production and 7 trillion Btu from transportation energy.

  13. Optimization of electron-cyclotron-resonance charge-breeder ions : Final CRADA Report.

    Energy Technology Data Exchange (ETDEWEB)

    Pardo, R.; Physics; Far-Tech, Inc.

    2009-10-09

    Measurements of 1+ beam properties and associated performance of ECR Charge Breeder source determined by total efficiency measurement and charge state distributions from the ECR Charge Breeder. These results were communicated to Far-Tech personnel who used them to benchmark the newly developed programs that model ion capture and charge breeding in the ECR Charge Breeder Source. Providing the basic data described above and in the discussion below to Far-Tech allowed them to improve and refine their calculational tools for ECR ion sources. These new tools will be offered for sale to industry and will also provide important guidance to other research labs developing Charge Breeding ion sources for radioactive beam physics research.

  14. Bipolar plate materials in molten carbonate fuel cells. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Krumpelt, M.

    2004-06-01

    Advantages of implementation of power plants based on electrochemical reactions are successfully demonstrated in the USA and Japan. One of the msot promising types of fuel cells (FC) is a type of high temperature fuel cells. At present, thanks to the efforts of the leading countries that develop fuel cell technologies power plants on the basis of molten carbonate fuel cells (MCFC) and solid oxide fuel cells (SOFC) are really close to commercialization. One of the problems that are to be solved for practical implementation of MCFC and SOFC is a problem of corrosion of metal components of stacks that are assembled of a number of fuel cells. One of the major components of MCFC and SOFC stacks is a bipolar separator plate (BSP) that performs several functions - it is separation of reactant gas flows sealing of the joints between fuel cells, and current collection from the surface of electrodes. The goal of Task 1 of the project is to develop new cost-effective nickel coatings for the Russian 20X23H18 steel for an MCFC bipolar separator plate using technological processes usually implemented to apply corrosion stable coatings onto the metal parts for products in the defense. There was planned the research on production of nickel coatings using different methods, first of all the galvanic one and the explosion cladding one. As a result of the works, 0.4 x 712 x 1296 mm plates coated with nickel on one side were to be made and passed to ANL. A line of 4 galvanic baths 600 liters was to be built for the galvanic coating applications. The goal of Task 2 of the project is the development of a new material of an MCFC bipolar separator plate with an upgraded corrosion stability, and development of a technology to produce cold roll sheets of this material the sizes of which will be 0.8 x 712x 1296 mm. As a result of these works, a pilot batch of the rolled material in sheets 0.8 x 712 x 1296 mm in size is to be made (in accordance with the norms and standards of the Russian metallurgical industry) and supplied to the partner for tests in a stack of fuel cells. A feasibility study on the cost of the Russian material for a BSP is to be done on Tasks 1, 2 in case the annual order makes up 400,000 sheets. The goal of Task 3 of the project is to research on possible implementation of cermet compositions on the basis of LiAlO{sub 2}, TiN, B{sub 4}C, ceramics with Ni and Ni-Mo binders. BaCeO{sub 3} conductive ceramics with metal binders of Ni, Ni-Cr etc. were also planned to be studied. As a result of these works, a pilot batch of samples is to be made and passed to FCE for tests. The goal of Task 4 of the Project is development of a new alloy or alloys with a ceramic coating that will have upgraded corrosion stability in operation within a SOFC. A new alloy was to be worked out by the way of modification of compositions of industrial alloys. Ceramic coatings are to be applied onto ferrite steel produced serially by iron and steel industry of Russia as sheet iron.

  15. Experimental Investigation of Coolant Boiling in a Half-Heated Circular Tube - Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Wenhua [Argonne National Lab. (ANL), Argonne, IL (United States); Singh, Dileep [Argonne National Lab. (ANL), Argonne, IL (United States); France, David M. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    Coolant subcooled boiling in the cylinder head regions of heavy-duty vehicle engines is unavoidable at high thermal loads due to high metal temperatures. However, theoretical, numerical, and experimental studies of coolant subcooled flow boiling under these specific application conditions are generally lacking in the engineering literature. The objective of this project was to provide such much-needed information, including the coolant subcooled flow boiling characteristics and the corresponding heat transfer coefficients, through experimental investigations.

  16. West Virginia Diesel Study, CRADA MC96-034, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    M. Gautam

    1998-08-05

    The global objective of the recently completed Phase 1 of the West Virginia Diesel Study, at West Virginia University, was to evaluate mass emission rates of exhaust emissions from diesel powered equipment specified by the West Virginia Diesel Equipment Commission. The experimental data generated in this study has been utilized by the West Virginia Diesel Equipment Commission to promulgate initial rules, requirements and standards governing the operation of diesel equipment in underground coal mines.

  17. Building-Wide, Adaptive Energy Management Systems for High-Performance Buildings: Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Zavala, Victor M. [Argonne National Lab. (ANL), Argonne, IL (United States). Mathematics and Computer Science

    2016-10-27

    Development and field demonstration of the minimum ratio policy for occupancy-driven, predictive control of outdoor air ventilation. Technology transfer of Argonne’s methods for occupancy estimation and forecasting and for M&V to BuildingIQ for their deployment. Selection of CO2 sensing as the currently best-available technology for occupancy-driven controls. Accelerated restart capability for the commercial BuildingIQ system using horizon shifting strategies applied to receding horizon optimal control problems. Empirical-based evidence of 30% chilled water energy savings and 22% total HVAC energy savings achievable with the BuildingIQ system operating in the APS Office Building on-site at Argonne.

  18. Ceramicrete stabilization of radioactive-salt-containing liquid waste and sludge water. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Ehst, D.; Nuclear Engineering Division

    2010-08-04

    It was found that the Ceramicrete Specimens incorporated the Streams 1 and 2 sludges with the adjusted loading about 41.6 and 31.6%, respectively, have a high solidity. The visible cracks in the matrix materials and around the anionite AV-17 granules included could not obtain. The granules mentioned above fixed by Ceramicrete matrix very strongly. Consequently, we can conclude that irradiation of Ceramecrete matrix, goes from the high radioactive elements, not result the structural degradation. Based on the chemical analysis of specimens No.462 and No.461 used it was shown that these matrix included the formation elements (P, K, Mg, O), but in the different samples their correlations are different. These ratios of the content of elements included are about {+-} 10%. This information shows a great homogeneity of matrix prepared. In the list of the elements founded, expect the matrix formation elements, we detected also Ca and Si (from the wollastonite - the necessary for Ceramicrete compound); Na, Al, S, O, Cl, Fe, Ni also have been detected in the Specimen No.642 from the waste forms: NaCl, Al(OH){sub 3}, Na{sub 2}SO{sub 4}. Fe(OH){sub 3}, nickel ferrocyanide and Ni(NO{sub 3})2. The unintelligible results also were found from analysis of an AV-17 granules, in which we obtain the great amount of K. The X-ray radiographs of the Ceramicrete specimens with loading 41.4 % of Stream 1 and 31.6% of Stream 2, respectively showed that the realization of the advance technology, created at GEOHKI, leads to formation of excellent ceramic matrix with high amount of radioactive streams up to 40% and more. Really, during the interaction with start compounds MgO and KH{sub 2}PO{sub 4} with the present of H{sub 3}BO{sub 3} and Wollastonite this process run with high speed under the controlled regimes. That fact that the Ceramicrete matrix with 30-40% of Streams 1 and 2 have a crystalline form, not amorphous matter, allows to permit that these matrix should be very stable, reliable for incorporation of a radionuclides.

  19. Heart pathology determination from electrocardiogram signals by application of deterministic chaos mathematics. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Clapp, N.E.; Hively, L.M. [Oak Ridge National Lab., TN (United States); Stickney, R.E. [Physio-Control Corp., Redmond, WA (United States)

    1999-03-01

    It is well known that the electrical signals generated by the heart exhibit nonlinear, chaotic dynamics. A number of heart pathologies alter heartbeat dynamics and/or the electrical properties of the heart, which, in turn, alter electrocardiogram signals. Electrocardiogram techniques in common use for diagnosing pathologies have limited sensitivity and specificity. This leads to a relatively high misdiagnosis rate for ventricular fibrillation. It is also known that the linear analysis tools utilized (such as fast Fourier transforms and linear statistics) are limited in their ability to find subtle changes or characteristic signatures in nonlinear chaotic electrocardiogram signals. In contrast, the authors` research indicates that chaotic time-series analysis tools that they have developed allow quantification of the nonlinear nature of dynamic systems in the form of nonlinear statistics, and also enable characteristic signatures to be identified. The goal of this project is to modify these tools to increase and enhance the medically useful information obtained from electrocardiogram signals through the application of chaotic time series analysis tools. In the one year of the project, the tools have been extended to enhance the capabilities for detecting ventricular fibrillation. Chaotic time-series analysis provides a means to increase sensitivity in detecting general heart dynamics. Oak Ridge National Laboratory specialists have worked with Physio-Control and their medical collaborators to extend the capabilities of state-of-the-art electrocardiogram systems and interpretation of results.

  20. Design of 3x3 focusing array for heavy ion driver. Final report on CRADA

    Energy Technology Data Exchange (ETDEWEB)

    Martovetsky, N N

    2005-03-30

    This memo presents a design of a 3 x 3 quadrupole array for HIF. It contains 3 D magnetic field computations of the array build with racetrack coils with and without different shields. It is shown that it is possible to have a low error magnetic field in the cells and shield the stray fields to acceptable levels. The array design seems to be a practical solution to any size array for future multi-beam heavy ion fusion drivers.

  1. Advanced hardware and software methods for thread and gear dimensional metrology. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Miller, A.C. Jr.; Grann, E.B.

    1997-03-05

    The Oak Ridge Centers for Manufacturing Technology (ORCMT) and Apeiron Incorporated have collaborated on an effort to develop a frequency modulated continuous wave (FMCW) fiber lidar system for dimensional metrology of internal threads, gears, and splines. The purpose of this effort was to assist a small company in developing an instrument that would exceed the performance of competing foreign instruments and provide measurement capabilities necessary to assure compliance for NASA facilities and other industrial facilities. The two parties collaborated on design, assembly, and bench testing of the prototype instrument. The prototype system was targeted to have the capability of profiling internally machined gears and threads to an accuracy of less than a micron.

  2. Agreement Workflow Tool (AWT)

    Data.gov (United States)

    Social Security Administration — The Agreement Workflow Tool (AWT) is a role-based Intranet application used for processing SSA's Reimbursable Agreements according to SSA's standards. AWT provides...

  3. CRADA with Beckman Instruments and Pacific Northwest National Laboratory (PNL-013): Development and commercialization of the Unsaturated Flow Apparatus (UFA) using characterization of aridisols

    Energy Technology Data Exchange (ETDEWEB)

    Wright, J.; Conca, J.

    1996-10-01

    The objective of this Cooperative Research and Development Agreement (CRADA) was to develop and commercialize a technology conceived by scientists at Pacific Northwest National Laboratory (PNNL) and manufactured by Beckman Instruments, Inc. (Beckman), and to apply this technology to the characterization of and soils. The technology is the Unsaturated Flow Apparatus (UFA). The UFA provides a highly efficient method of direct, rapid measurement of hydraulic conductivity and other flow properties according to Darcy-Buckingham principles because the operator controls both the fluid driving force, using an ultracentrifuge, and the flow into the sample while it is spinning, with a rotating seal assembly. The concept of using centrifugation to significantly decrease the time needed, from years or months to days, for study of subsurface transport, particularly under unsaturated conditions, was conceived by James Conca, Ph.D., and Judith Wright, Ph.D., in 1986. The prototype UFA was developed in 1988 because there was a need to rapidly and accurately determine transport parameters in soils, sediments, and rocks for the Grout Waste Disposal Program. Transport parameters are critical to modeling outcomes for site-specific solutions to environmental remediation and waste disposal problems.

  4. China-ASEAN investment agreement negotiations

    Institute of Scientific and Technical Information of China (English)

    CHEN Huiping

    2006-01-01

    China and the ASEAN are negotiating to establish a free trade area and an investment agreement is an integral part of it.The ongoing investment agreement negotiations have achieved some basic consensus as to specific contents of the agreement.However,due to the procedural obstacles and substantive controversies,the negotiations have become stagnant.In order to reach a final and successful conclusion of the investment agreement,the procedural obstacles should be' overcome and the substantive controversies be settled since the agreement has economic and political implications for both China and the ASEAN.

  5. Agreement in Bloomfield.

    Science.gov (United States)

    Langendoen, D. Terence; McDaniel, Dana S.

    A discussion of Leonard Bloomfield's theory on grammatical agreement examines agreement within Bloomfield's overall scheme of syntactic analysis and relates it to current work in syntax. Bloomfield's three types of agreement (concord, government, and cross-reference) are outlined and compared to the contemporary distinction between pro-drop and…

  6. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Fourth Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Ba Nghiep; Simmons, Kevin L.

    2013-12-02

    This quarterly report summarizes the status of the project planning to obtain all the approvals required for a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). The final CRADA documents processed by PNNL’s Legal Services were submitted to all the parties for signatures.

  7. Shareholders' agreements in Denmark

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2010-01-01

    analyses the consequences of this. Rights and duties in the owners’ agreements must now be reiterated to the greatest possible extent in the company’s articles of association so that the precepts become binding on the company and its management. Whether the parties to the owners’ agreement can be required...

  8. Agreement on African Venture

    Institute of Scientific and Technical Information of China (English)

    LAN XINZHEN

    2010-01-01

    @@ China's biggest aluminum producer Aluminum Corp.China Ltd.(Chalco) signed a binding agreement with the world's second largest mining company,Rio Tinto,on July 29 in Beijing.The agreement will establish a joint venture to develop and operate the Simandou iron ore project in Guinea,Africa.

  9. The Helsinki Agreement

    Science.gov (United States)

    Babel: Journal of the Australian Federation of Modern Language Teachers' Associations, 1977

    1977-01-01

    A reprint of sections of the Helsinki agreement dealing with foreign languages and civilization, and cooperation and exchanges in the field of education. The agreement supports wider knowledge of foreign languages and promotes exchanges, cooperation, lexicography, and specialized programs in adult education. (AMH)

  10. Medicare Program; hospital inpatient prospective payment systems for acute care hospitals and the long-term care hospital prospective payment system changes and FY2011 rates; provider agreements and supplier approvals; and hospital conditions of participation for rehabilitation and respiratory care services; Medicaid program: accreditation for providers of inpatient psychiatric services. Final rules and interim final rule with comment period.

    Science.gov (United States)

    2010-08-16

    : We are revising the Medicare hospital inpatient prospective payment systems (IPPS) for operating and capital-related costs of acute care hospitals to implement changes arising from our continuing experience with these systems and to implement certain provisions of the Affordable Care Act and other legislation. In addition, we describe the changes to the amounts and factors used to determine the rates for Medicare acute care hospital inpatient services for operating costs and capital-related costs. We also are setting forth the update to the rate-of-increase limits for certain hospitals excluded from the IPPS that are paid on a reasonable cost basis subject to these limits. We are updating the payment policy and the annual payment rates for the Medicare prospective payment system (PPS) for inpatient hospital services provided by long-term care hospitals (LTCHs) and setting forth the changes to the payment rates, factors, and other payment rate policies under the LTCH PPS. In addition, we are finalizing the provisions of the August 27, 2009 interim final rule that implemented statutory provisions relating to payments to LTCHs and LTCH satellite facilities and increases in beds in existing LTCHs and LTCH satellite facilities under the LTCH PPS. We are making changes affecting the: Medicare conditions of participation for hospitals relating to the types of practitioners who may provide rehabilitation services and respiratory care services; and determination of the effective date of provider agreements and supplier approvals under Medicare. We are also setting forth provisions that offer psychiatric hospitals and hospitals with inpatient psychiatric programs increased flexibility in obtaining accreditation to participate in the Medicaid program. Psychiatric hospitals and hospitals with inpatient psychiatric programs will have the choice of undergoing a State survey or of obtaining accreditation from a national accrediting organization whose hospital accreditation

  11. Trade Agreements PTI

    Data.gov (United States)

    Department of Homeland Security — The objective of the Trade Agreements PTI is to advance CBP’s mission by working with internal and external stakeholders to facilitate legitimate trade and address...

  12. Service level agreements.

    Science.gov (United States)

    Grimwood, A

    1998-02-01

    Service level agreements provide clearer descriptions of the services to be provided and the objectives to be met. In many instances it is the first time that services have been defined allowing their performance to be suitably measured. They should be output based and not too prescriptive on how the services are to be delivered. The emphasis should be on establishing outputs and the arrangements for monitoring achievement. Customer expectations can exceed available resources and arbitration may become necessary if agreement cannot be reached on internal service level agreements. The main requirements of customers for change through service level agreements is usually improved communications on job status that includes notification of any delays and that agreed response times will be met.

  13. The Sicomines Agreement

    DEFF Research Database (Denmark)

    Jansson, Johanna

    of the global political economy have shifted, and that China’s position as a foreign policy actor is now consolidated. Continuity, since the 2009 amendment of the agreement, which came about partly as a result of China’s ambitions to take up an active role in the International Monetary Fund (IMF......, the investment into the DRC’s mining sector is in itself beneficial for the country, and the renegotiation of the agreement was positive in the sense that the Congolese state guarantee for the mining component was removed. However, the question of whether the Sicomines agreement is a good deal for the DRC...... will remain unanswered until the infrastructure projects have been delivered. The importance of the Congolese Agency for Public Works’ task to price each project and ensure that monitoring is conducted properly can therefore not be overestimated....

  14. Segmentation Similarity and Agreement

    CERN Document Server

    Fournier, Chris

    2012-01-01

    We propose a new segmentation evaluation metric, called segmentation similarity (S), that quantifies the similarity between two segmentations as the proportion of boundaries that are not transformed when comparing them using edit distance, essentially using edit distance as a penalty function and scaling penalties by segmentation size. We propose several adapted inter-annotator agreement coefficients which use S that are suitable for segmentation. We show that S is configurable enough to suit a wide variety of segmentation evaluations, and is an improvement upon the state of the art. We also propose using inter-annotator agreement coefficients to evaluate automatic segmenters in terms of human performance.

  15. FFTF Authorization Agreement

    Energy Technology Data Exchange (ETDEWEB)

    DAUTEL, W.A.

    2000-02-25

    The purpose of the Authorization Agreement is to serve as a mechanism whereby the U.S. Department of Energy, Richland Operations Office (RL) and Fluor Hanford (FH) jointly clarify and agree to key conditions for conducting work safely and efficiently.

  16. Development of Electrodeposited CIGS Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-09-357

    Energy Technology Data Exchange (ETDEWEB)

    Neale, Nathan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    At present, most PV materials are fabricated by vacuum technologies. Some of the many disadvantages of vacuum technology are complicated instrumentation, material waste, high cost of deposition per surface area, and instability of some compounds at the deposition temperature. Solution-based approaches for thin-film deposition on large areas are particularly desirable because of the low capital cost of the deposition equipment, relative simplicity of the processes, ease of doping, uniform deposition on a variety of substrates (including interior and exterior of tubes and various nonplanar devices), and potential compatibility with high-throughput (e.g., roll-to-roll) processing. Of the nonsilicon solar photovoltaic device modules that have been deployed to date, those based on the n-CdS/p-CdTe is a leading candidate. Two features in the optical characteristics of CdTe absorber are particularly attractive for photovoltaic conversion of sunlight; (a) its energy bandgap of 1.5 eV, which provides an optimal match with the solar spectrum and thus facilitates its efficient utilization and (b) the direct mode of the main optical transition which results in a large absorption coefficient and turn permits the use of thin layer (1-2 um) of active material. Thin films of CdTe required for these devices have been fabricated by a variety of methods (e.g., vapor transport deposition, vacuum deposition, screen printing and close-spaced sublimation). Electrodeposition is another candidate deserves more attention. This project will focus on delivering low-cost, high efficiency electrodeposited CdTe-based device.

  17. Sorghum to Ethanol Research Initiative: Cooperative Research and Development Final Report, CRADA Number CRD-08-291

    Energy Technology Data Exchange (ETDEWEB)

    Wolfrum, E.

    2011-10-01

    The goal of this project was to investigate the feasibility of using sorghum to produce ethanol. The work performed included a detailed examination of the agronomics and composition of a large number of sorghum varieties, laboratory experiments to convert sorghum to ethanol, and economic and life-cycle analyses of the sorghum-to-ethanol process. This work showed that sorghum has a very wide range of composition, which depended on the specific sorghum cultivar as well as the growing conditions. The results of laboratory- and pilot-scale experiments indicated that a typical high-biomass sorghum variety performed very similarly to corn stover during the multi-step process required to convert biomass feedstocks to ethanol; yields of ethanol for sorghum were very similar to the corn stover used as a control in these experiments. Based on multi-year agronomic data and theoretical ethanol production, sorghum can achieve more than 1,300 gallons of ethanol per acre given the correct genetics and environment. In summary, sorghum may be a compelling dedicated bioenergy crop that could help provide a portion of the feedstocks required to produce renewable domestic transportation fuels.

  18. Modeling Parasitic Energy Losses and the Impact of Advanced Tribological Concepts on Fuel Efficiency - Final CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Fenske, George [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-28

    Our primary task for this project was to perform FMEP calculations for a broad range of parameters including engine type [spark ignition (SI) or compression ignition (CI)], engine size, engine mode (speed and load), lubricant viscosity, asperity friction, surface finish, oil type (mineral or synthetic), and additive (friction modifier), as discussed previously [1–3]. The actual analysis was limited to a large diesel engine and it included both load and speed dependencies as well as lubricant viscosity and speed.

  19. Solar Resource Measurements at FPL Energy - Equipment Only. Cooperative Research and Development Final Report, CRADA Number CRD-08-283

    Energy Technology Data Exchange (ETDEWEB)

    Dooraghi, Mike [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-05-07

    Site-specific, long-term, continuous, and high-resolution measurements of solar irradiance are important for developing renewable resource data. These data are used for several research and development activities consistent with the NREL mission: Establish a national 30-year climatological database of measured solar irradiances; Provide high quality ground-truth data for satellite remote sensing validation; Support development of radiative transfer models for estimating solar irradiance from available meteorological observations; Provide solar resource information needed for technology deployment and operations.

  20. Metallic Inks for Solar Cells: Cooperative Research and Development Final Report, CRADA Number CRD-10-370

    Energy Technology Data Exchange (ETDEWEB)

    van Hest, M.

    2013-04-01

    This document describes the statement of work for National Renewable Energy Laboratory (NREL) as a subcontractor for Applied Nanotech, Inc. (ANI) for the Phase II SBIR contract with the Department of Energy to build silicon solar cells using non-contact printed, nanoparticle-based metallic inks. The conductive inks are based upon ANI's proprietary method for nanoparticle dispersion. The primary inks under development are aluminum for silicon solar cell back plane contacts and copper for top interdigitated contacts. The current direction of silicon solar cell technology is to use thinner silicon wafers. The reduction in wafer thickness reduces overall material usage and can increase efficiency. These thin silicon wafers are often very brittle and normal methods used for conductive feed line application, such as screen-printing, are detrimental. The Phase II program will be focused on materials development for metallic inks that can be applied to a silicon solar cell using non-contact methods. Uniform BSF (Back Surface Field) formation will be obtained by optimizing ink formulation and curing conditions to improve cell efficiency.

  1. Hydrogen Compressor Reliability Investigation and Improvement. Cooperative Research and Development Final Report, CRADA Number CRD-13-514

    Energy Technology Data Exchange (ETDEWEB)

    Terlip, Danny [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-03-28

    Diaphragm compressors have become the primary source of on-site hydrogen compression for hydrogen fueling stations around the world. NREL and PDC have undertaken two studies aimed at improving hydrogen compressor operation and reducing the cost contribution to dispensed fuel. The first study identified the failure mechanisms associated with mechanical compression to reduce the maintenance and down-time. The second study will investigate novel station configurations to maximize hydrogen usage and compressor lifetime. This partnership will allow for the simulation of operations in the field and a thorough analysis of the component failure to improve the reliability of diaphragm compression.

  2. Heavy-duty diesel engine NO{sub x} reduction with nitrogen-enriched combustion air. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, S.; Energy Systems

    2010-07-28

    The concept of engine emissions control by modifying intake combustion gas composition from that of ambient air using gas separation membranes has been developed during several programs undertaken at Argonne. These have led to the current program which is targeted at heavy-duty diesel truck engines. The specific objective is reduction of NO{sub x} emissions by the target engine to meet anticipated 2007 standards while extracting a maximum of 5 percent power loss and allowing implementation within commercial constraints of size, weight, and cost. This report includes a brief review of related past programs, describes work completed to date during the current program, and presents interim conclusions. Following a work schedule adjustment in August 2002 to accommodate problems in module procurement and data analysis, activities are now on schedule and planned work is expected to be completed in September, 2004. Currently, we believe that the stated program requirements for the target engine can be met, based upon extrapolation of the work completed. Planned project work is designed to experimentally confirm these projections and result in a specification for a module package that will meet program objectives.

  3. Advanced quadrupole ion trap instrumentation for low level vehicle emissions measurements. CRADA final report for number ORNL93-0238

    Energy Technology Data Exchange (ETDEWEB)

    McLuckey, S.A.; Buchanan, M.V.; Asano, K.G.; Hart, K.J.; Goeringer, D.E. [Oak Ridge National Lab., TN (United States); Dearth, M.A. [Ford Motor Co., Dearborn, MI (United States). Environmental Research Consortium

    1997-09-01

    Quadrupole ion trap mass spectrometry has been evaluated for its potential use in vehicle emissions measurements in vehicle test facilities as an analyzer for the top 15 compounds contributing to smog generation. A variety of ionization methods were explored including ion trap in situ chemical ionization, atmospheric sampling glow discharge ionization, and nitric oxide chemical ionization in a glow discharge ionization source coupled with anion trap mass spectrometer. Emphasis was placed on the determination of hydrocarbons and oxygenated hydrocarbons at parts per million to parts per billion levels. Ion trap in situ water chemical ionization and atmospheric sampling glow discharge ionization were both shown to be amenable to the analysis of arenes, alcohols, aldehydes and, to some degree, alkenes. Atmospheric sampling glow discharge also generated molecular ions of methyl-t-butyl ether (MTBE). Neither of these ionization methods, however, were found to generate diagnostic ions for the alkanes. Nitric oxide chemical ionization, on the other hand, was found to yield diagnostic ions for alkanes, alkenes, arenes, alcohols, aldehydes, and MTBE. The ability to measure a variety of hydrocarbons present at roughly 15 parts per billion at measurement rates of 3 Hz was demonstrated. These results have demonstrated that the ion trap has an excellent combination of sensitivity, specificity, speed, and flexibility with respect to the technical requirements of the top 15 analyzer.

  4. Biomass Resource Demand Characterization Study: Cooperative Research and Development Final Report, CRADA Number CRD-11-436

    Energy Technology Data Exchange (ETDEWEB)

    Mann, M.

    2015-02-01

    Competing demands for U.S. biomass resources and resulting impacts on regional feedstock availability could have a significant impact on the ability of the biofuels industry to transition to lower cost feedstocks, such as wood, agricultural residues, and energy crops, as well as on the ability of U.S. electric utilities and consumers to meet Renewable Portfolio Standards (RPS) and transition to lower carbon-footprint sources of electricity. Promulgation of regulations that place a cost on CO2 emissions from fossil fuels will also impact this situation as biomass to power applications become increasingly cost competitive. This increased competition for biomass feedstocks could create technical and economic risks for the Government, industry, and investors, and has the potential to impede commercialization of bio-energy in the U.S. at a meaningful scale.

  5. Renewable Energy Institute International (REII): Cooperative Research and Development Final Report, CRADA Number CRD-10-387

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, D.

    2014-11-01

    NREL will provide the Renewable Energy Institute with detailed on-site biomass gasifier syngas monitoring, using the NREL transportable Molecular Beam Mass Spectrometer. This information will be used to optimize the parameters of the gasifier operation, insuring the quality of the syngas made in the Red Lion Bioenergy gasifier and its compatibility with catalytic conversion to fuels.

  6. Development of Optimal CZTS Device Structure: Cooperative Research and Development Final Report, CRADA Number CRD-12-476

    Energy Technology Data Exchange (ETDEWEB)

    van Hest, Maikel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    Suntricity Corporation and NREL will develop an optimal CZTS device structure. In this process absorber materials provided by Suntricity Corporation will be used for testing. For this purpose Suntricity Corporation will provide dried film precursors or ink precursors. NREL will process these into PV material and complete cells with buffer, window and contacts.

  7. Array Effects in Large Wind Farms. Cooperative Research and Development Final Report, CRADA Number CRD-09-343

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-23

    The effects of wind turbine wakes within operating wind farms have a substantial impact on the overall energy production from the farm. The current generation of models drastically underpredicts the impact of these wakes leading to non-conservative estimates of energy capture and financial losses to wind farm operators and developers. To improve these models, detailed research of operating wind farms is necessary. Rebecca Barthelmie of Indiana University is a world leader of wind farm wakes effects and would like to partner with NREL to help improve wind farm modeling by gathering additional wind farm data, develop better models and increase collaboration with European researchers working in the same area. This is currently an active area of research at NREL and the capabilities of both parties should mesh nicely.

  8. Predictive Battery Management System for Commercial Hybrid Vehicles: Cooperative Research and Development Final Report, CRADA Number CRD-13-520

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kandler [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-08-01

    NREL and Eaton Corporation will perform work together on DOE Advanced Research Projects Agency-Energy (ARPA-E) 'Advanced Management and Protection of Energy Storage Devices' program (DE-FOA0000675). NREL will experimentally characterize aging behavior of Eaton cells and packs. Eaton and NREL will implement NREL's prognostic life model in Eaton HEV supervisory controllers and demonstrate the algorithms in accelerated life hardware-in-the loop testing conducted at NREL.

  9. Economic and Performance Analysis of Gear Box Failures. Cooperative Research and Development Final Report, CRADA Number CRD-07-236

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-10-01

    The National Renewable Energy Laboratory (NREL) in Golden, CO, USA is forming a collaborative within the wind energy industry to address reliability issues on wind turbines. The National Wind Technology Center (NWTC), leading the collaborative effort, will allow gearbox manufacturers, bearing manufacturers, wind turbine owner/operators, and wind turbine manufacturers to team up for joint projects that address specific issues regarding design and reliability of wind turbine gearboxes. The primary means of investigation will be through full scale testing and analysis of actual gearboxes, both in the field and in the NREL 2.5 MW dynamometer test facility. These teams would contribute resources into a campaign that is intended to serve the mutual interests of a majority of the wind and gearbox industry stakeholders in addition to the specific project team objectives. that address specific issues regarding design and reliability of wind turbine gearboxes. The primary means of investigation will be through full scale testing and analysis of actual gearboxes, both in the field and in the NREL 2.5 MW dynamometer test facility. These teams would contribute resources into a campaign that is intended to serve the mutual interests of a majority of the wind and gearbox industry stakeholders in addition to the specific project team objectives.

  10. Biodiesel Performance with Modern Engines. Cooperative Research and Development Final Report, CRADA Number CRD-05-153

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-29

    NREL and the National Biodiesel Board (NBB) will work cooperatively to assess the effects of biodiesel blends on the performance of modern diesel engines and emissions control systems meeting increasingly strict emissions standards. This work will include research to understand the impact of biodiesel blends on the operation and durability of particle filters and NOx control sorbents/catalysts, to quantify the effect on emission control systems performance, and to understand effects on engine component durability. Work to assess the impact of biodiesel blends on real world fleet operations will be performed. Also, research to develop appropriate ASTM standards for biodiesel quality and stability will be conducted. The cooperative project will involve engine testing and fleet evaluation studies at NREL using biodiesel from a variety of sources. In addition, NREL will work with NBB to set up an Industrial Steering Committee to design the scope for the various projects and to provide technical oversight to these projects. NREL and NBB will cooperatively communicate the study results to as broad an audience as possible.

  11. Flexible CdTe Solar Cells and Modules: Cooperative Research and Development Final Report, CRADA Number CRD-14-548

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, Teresa [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    Lucintech and NREL will collaborate to develop flexible CdTe solar cells on flexible glass using sputtering and other deposition technologies. This initial work will be conducted under the DOE funded Foundational Program to Advance Cell Efficiency (FPACE) 1 project, and the interaction with Lucintech will focus on scaling up and transferring the high efficiency cell processes to module production on a pilot line.

  12. Projecting Fatalities in Crashes Involving Older Drivers, 2000–2025, CRADA No. ORNL98-0500 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Patricia S. [ORNL; Jones, Donald W. [ORNL; Reuscher, Timothy [Oak Ridge Institute for Science and Education; Schmoyer, Richard S. [ORNL; Truett, Lorena F. [ORNL

    2000-04-01

    At the turn of the century – the 20th century that is – the median age in the United States was under 30 years; America was 60% rural in nature; and there were only 36 highway fatalities all year. As we leave the 20th century behind, the route into the 21st century is very different. “Intelligent” cars speed down multi-lane “smart” highways in a nation that is 75% urban. According to the Federal Highway Administration’s Highway Statistics, there are 28,000 times more vehicles on the road in 2000 than there were in 1900, and these vehicles travel about 2.6 trillion miles each year. Annual fatalities resulting from highway crashes have also increased – by over 1100%. We see other changes as well. The face of America is changing. It is growing older. In 2025, persons 65 and over will make up 18.5% of the total population. The number of persons aged 85 and over is increasing more rapidly than any other age group. More importantly, the elderly are taking more trips, driving further, and continuing to drive much later in life. These conditions lead to concerns about traffic safety. Although the elderly are healthier and drive safer cars than they did just two decades ago, their frailty makes them more susceptible to injury than younger persons involved in traffic crashes of the same severity. In addition, visual, physical, and cognitive skills, all of which contribute to driving abilities, decrease with advancing age. The familiar “U”-shaped curve depicting the rate of fatalities per vehicle miles traveled, shows that the elderly experience a higher highway fatality rate than any other age group except teenagers. While the overall number of highway fatalities has decreased regularly since 1972, the number of fatalities of elderly travelers has continued to increase steadily. This increase is cause for concern for both the elderly driver and for other persons on the roads who migh tbe placed in danger through crashes involving elderly drivers.

  13. Biomass in Multifunction Crop Plants: Cooperative Research and Development Final Report, CRADA Number CRD-05-163

    Energy Technology Data Exchange (ETDEWEB)

    Decker, S. R.

    2011-10-01

    An array of cellulase, hemicellulase, and accessory enzymes were tested for their ability to increase the conversion levels and rates of biomass to sugar after being subjected to thermochemical pretreatment. The genes were cloned by Oklahoma State University and expressed, purified, and tested at NREL. Several enzymes were noted to be effective in increasing conversion levels, however expression levels were typically very low. The overall plan was to express these enzymes in corn as a possible mechanism towards decreased recalcitrance. One enzyme, cel5A endoglucanase from Acidothermus cellulolyticus, was transformed into both tobacco and corn. The transgenic corn stover and tobacco were examined for their susceptibility to thermochemical pretreatment followed by enzymatic digestion.

  14. CRADA (AL-C-2009-02) Final Report: Phase I. Lanthanum-based Start Materials for Hydride Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Gschneidner, Jr., Karl [Ames Laboratory; Schmidt, Frederick [Ames Laboratory; Frerichs, A. E. [Ames Laboratory; Ament, Katherine A. [Ames Laboratory

    2013-05-01

    The purpose of Phase I of this work is to focus on developing a La-based start material for making nickel-metal (lanthanum)-hydride batteries based on our carbothermic-silicon process. The goal is to develop a protocol for the manufacture of (La{sub 1-x}R{sub x})(Ni{sub 1-y}M{sub y})(Si{sub z}), where R is a rare earth metal and M is a non-rare earth metal, to be utilized as the negative electrode in nickel-metal hydride (NiMH) rechargeable batteries.

  15. Flow Visualization Studies in the Novacor Left Ventricular Assist System CRADA PC91-002, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Borovetz, H.S.; Shaffer, F.; Schaub, R.; Lund, L.; Woodard, J.

    1999-01-01

    This paper discusses a series of experiments to visualize and measure flow fields in the Novacor left ventricular assist system (LVAS). The experiments utilize a multiple exposure, optical imaging technique called fluorescent image tracking velocimetry (FITV) to hack the motion of small, neutrally-buoyant particles in a flowing fluid.

  16. Platform Li-Ion Battery Risk Assessment Tool: Cooperative Research and Development Final Report, CRADA Number CRD-10-407

    Energy Technology Data Exchange (ETDEWEB)

    Smith, K.

    2012-01-01

    Creare was awarded a Phase 1 STTR contract from the US Office of Naval Research, with a seven month period of performance from 6/28/2010 to 1/28/2011. The objectives of the STTR were to determine the feasibility of developing a software package for estimating reliability of battery packs, and develop a user interface to allow the designer to assess the overall impact on battery packs and host platforms for cell-level faults. NREL served as sub-tier partner to Creare, providing battery modeling and battery thermal safety expertise.

  17. Oak Ridge National Laboratory Wireless Charging of Electric Vehicles - CRADA Report

    Energy Technology Data Exchange (ETDEWEB)

    Onar, Omer C [ORNL; Campbell, Steven L [ORNL; Seiber, Larry Eugene [ORNL; White, Cliff P [ORNL; Chinthavali, Madhu Sudhan [ORNL; Tang, Lixin [ORNL; Chambon, Paul H [ORNL; Ozpineci, Burak [ORNL; Smith, David E [ORNL

    2016-06-20

    Wireless power transfer (WPT) is a paradigm shift in electric-vehicle (EV) charging that offers the consumer an autonomous, safe, and convenient option to conductive charging and its attendant need for cables. With WPT, charging process can be fully automated due to the vehicle and grid side radio communication systems, and is non-contacting; therefore issues with leakage currents, ground faults, and touch potentials do not exist. It also eliminates the need for touching the heavy, bulky, dirty cables and plugs. It eliminates the fear of forgetting to plug-in and running out of charge the following day and eliminates the tripping hazards in public parking lots and in highly populated areas such as shopping malls, recreational areas, parking buildings, etc. Furthermore, the high-frequency magnetic fields employed in power transfer across a large air gap are focused and shielded, so that fringe fields (i.e., magnetic leakage/stray fields) attenuate rapidly over a transition region to levels well below limits set by international standards for the public zone (which starts at the perimeter of the vehicle and includes the passenger cabin). Oak Ridge National Laboratory s approach to WPT charging places strong emphasis on radio communications in the power regulation feedback channel augmented with software control algorithms. The over-arching goal for WPT is minimization of vehicle on-board complexity by keeping the secondary side content confined to coil tuning, rectification, filtering, and interfacing to the regenerative energy-storage system (RESS). This report summarizes the CRADA work between the Oak Ridge National Laboratory and the Toyota Research Institute of North America, Toyota Motor Engineering and Manufacturing North America (TEMA) on the wireless charging of electric vehicles which was funded by Department of Energy under DE-FOA-000667. In this project, ORNL is the lead agency and Toyota TEMA is one of the major partners. Over the course of the project

  18. Predicative Adjective Agreement

    DEFF Research Database (Denmark)

    Vikner, Sten

    2001-01-01

    German is a complicated language. Any speaker of e.g. French or Danish who has ever tried to learn German would agree to this. Coming from languages with only two genders and with no case outside the pronoun system, German, with three genders and with four cases throughout the nominal system, seems...... unjustifiably complicated, as if it had been specially designed to torment poor students. However, there is one area where German agreement morphology could not possibly be simpler, and where German is much easier for non-native speakers than e.g. French or Danish: predicative adjectives. Both gender and number...... distinctions, disappear when adjectives are used predicatively. This paper will try to account for why the Germanic languages that inflect attiributive adjectives but not predicative ones are all SOV-languages (e.g. German, Dutch, Frisian and Yiddish)....

  19. Agreement with Subjects in Lubukusu

    Science.gov (United States)

    Diercks, Michael J. K.

    2010-01-01

    This dissertation examines three topics in the morphosyntax of Lubukusu (Bantu, Kenya), all of which are concerned with agreement with subjects: locative inversion, complementizer agreement, and alternative agreement effects in subject extraction. Each topic reports novel Lubukusu data which are both typologically interesting and theoretically…

  20. EDITORIAL AGREEMENT TOWARDS EXCELLENCE

    Directory of Open Access Journals (Sweden)

    Julián A. Herrera M

    2009-06-01

    dica works to implement an automated system (web manager limbering important mechanisms like articles submission, evaluation process and management of editorial decisions, in order to increase in authors the proportion of an universal language use for scientific communication. In this number sixteen articles have been received from four countries and two continents, more than half of them written in English, which demonstrates an advance achieving the proposed objectives.Finally I would like to refer to a public health problem that continues with no solution in Colombia. It has been treated by some authors of various articles in this number. According to United Nations Population Fund maternal mortality is the millennium developing goal that is less achieved in the country. The National Health Institute of the United States of America (NHI has made a call to diminish research breach between disciplines as the only way to find some day preeclampsia’s etiology and prevention, which is the first cause of maternal death in Colombia. Regardless of known causes, there is a consensus about the multifactorial origin of the illness; and so, preventive actions should be taken in that direction, as it is presented by the review article.Increase coverage of prenatal control, number of prenatal controls, and increase institutional attention at delivery, is not concordant with high mortality rates observed in many countries in the region, that also present issues with attention quality and a high degree of unaccomplished standards and protocols. This situation deserves a very deep reflexion. Government, academy, and society have a great social responsibility to modify this serious problem that affects in a very sensitive way life quality specially that of the most vulnerable population.

  1. Labor Agreement Information System (LAIRS)

    Data.gov (United States)

    Office of Personnel Management — The Labor Agreement Information Retrieval System (LAIRS) is a database containing historical information on labor-management relations in the Federal Government. It...

  2. Notes on Agreement in Itelmen

    Directory of Open Access Journals (Sweden)

    Jonathan David Bobaljik

    2002-01-01

    Full Text Available Agreement in Itelmen is represented by means of both prefixes and suffixes. While the prefixes reference subjects (of both transitive and intransitive verbs, the suffixal agreement morphemes on a given verb may reference the subject, the object, or an oblique argument, or some combination of these. We propose that the proper characterization of the factors that determine which arguments control suffixal agreement involves a division of labour between morphology and a notion of discourse prominence/salience. In essence, we propose that the suffixal agreement morpheme is an object agreement marker, but the features of the subject are reflected in this position when the object lacks the relevant features (for example, we treat third person as the lack of a person feature, or is absent altogether (thus, intransitive verbs agree twice with their subjects. When a verb occurs with an oblique as well as a direct object, discourse salience will determine which of these non-subject arguments will control object agreement. In addition to providing a description of a complex range of facts from Itelmen, the paper sheds light on the nature of “multiple exponence” and the role of “competition” among affixes for a particular position in the verbal agreement system.

  3. Corporate Integrity Agreement (CIA) documents

    Data.gov (United States)

    U.S. Department of Health & Human Services — OIG negotiates corporate integrity agreements (CIA) with health care providers and other entities as part of the settlement of Federal health care program...

  4. Mass Customizing IT Service Agreements

    OpenAIRE

    Brocke, Henrik Finn; Uebernickel, Falk; Brenner, Walter

    2010-01-01

    IT service providers shall achieve both cost reduction in their IT operations and customer individuality in service agreements. This article suggests adapting the well known principle of mass customization to balance individuality and standardization in service agreements. Dependent on the commitment modularity type, its employment may not only save time and resources at the point of customer involvement but also allow the pre-engineering of repeatable processes of provisioning and IT operati...

  5. FY2011 Progress Report: Agreement 8697 - NOx Sensor Development

    Energy Technology Data Exchange (ETDEWEB)

    Woo, L Y; Glass, R S

    2011-11-01

    different concentration regimes obtained from bench-level laboratory evaluation were used to adjust the sensor signal in dynamometer testing. Both NO{sub x} and O{sub 2} exhibited non-linear responses over the concentration regimes examined (0-100 ppm for NO{sub x} and 4-7% for O{sub 2}). Adjusted sensor signals had better agreement with both a commercial NO{sub x} sensor and FTIR measurements. However, the lack of complete agreement indicated that it was not possible to completely account for the nonlinear sensor behavior in certain concentration regimes. The agreement at lower NO{sub x} levels (less than 20 ppm) was better than at higher levels (50-100 ppm). Other progress in FY2011 included dynamometer testing of sensors with imbedded heaters and protective housings that were mounted directly into the exhaust manifold. Advanced testing protocols were used to evaluate the sensors. These experiments confirmed the potential for sensor robustness and durability. Advanced material processing methods appropriate for mass manufacturing, such as sputtering, are also being evaluated. A major milestone for this past year was the licensing of the LLNL NO{sub x} sensor technology to EmiSense Technologies, LLC. EmiSense has extensive experience and resources for the development of emission control sensors. A CRADA is in development that will allow LLNL to work in partnership with EmiSense to bring the LLNL NO{sub x} sensor technology to commercialization. Ford Motor Company is also a partner in this effort.

  6. Clinical Trials Reference Materials and Related Links | Division of Cancer Prevention

    Science.gov (United States)

    Agreements Clinical Trials Agreement Confidential Disclosure Agreements Cooperative Research and Development Agreement (CRADA) - Research Plan Financial and Staffing Contribution of the Parties Exception or Modifications to the CRADA Human Subject Protection/Informed Consent Tutorials (or Education) |

  7. Gender agreement and multiple referents

    Science.gov (United States)

    Finocchiaro, Chiara; Mahon, Bradford Z.; Caramazza, Alfonso

    2010-01-01

    We report a new pattern of usage in current, spoken Italian that has implications for both psycholinguistic models of language production and linguistic theories of language change. In Italian, gender agreement is mandatory for both singular and plural nouns. However, when two or more nouns of different grammatical gender appear in a conjoined noun phrase (NP), masculine plural agreement is required. In this study, we combined on-line and off-line methodologies in order to assess the mechanisms involved in gender marking in the context of multiple referents. The results of two pronoun production tasks showed that plural feminine agreement was significantly more difficult than plural masculine agreement. In a separate study using offline judgements of acceptability, we found that agreement violations in Italian are tolerated more readily in the case of feminine conjoined noun phrases (e.g., la mela e la banana ‘the:fem apple:fem and the: fem banana: fem’) than masculine conjoined noun phrases (e.g., il fiore e il libro ‘the:mas flower: mas and the:mas book:mas’). Implications of these results are discussed both at the level of functional architecture within the language production system and at the level of changes in language use.* PMID:21037930

  8. Gender agreement and multiple referents.

    Science.gov (United States)

    Finocchiaro, Chiara; Mahon, Bradford Z; Caramazza, Alfonso

    2008-01-01

    We report a new pattern of usage in current, spoken Italian that has implications for both psycholinguistic models of language production and linguistic theories of language change. In Italian, gender agreement is mandatory for both singular and plural nouns. However, when two or more nouns of different grammatical gender appear in a conjoined noun phrase (NP), masculine plural agreement is required. In this study, we combined on-line and off-line methodologies in order to assess the mechanisms involved in gender marking in the context of multiple referents. The results of two pronoun production tasks showed that plural feminine agreement was significantly more difficult than plural masculine agreement. In a separate study using offline judgements of acceptability, we found that agreement violations in Italian are tolerated more readily in the case of feminine conjoined noun phrases (e.g., la mela e la banana 'the:fem apple:fem and the: fem banana: fem') than masculine conjoined noun phrases (e.g., il fiore e il libro 'the:mas flower: mas and the:mas book:mas'). Implications of these results are discussed both at the level of functional architecture within the language production system and at the level of changes in language use.

  9. Framework agreements in public procurement

    DEFF Research Database (Denmark)

    Andrecka, Marta; Telles, Pedro

    2015-01-01

    Interview with Dr. Marta Andrecka, Postdoctoral Fellow at the Department of Law at the University of Aarhus, where she is currently working on a project called "Dealing with legal loopholes and uncertainties within EU public procurement law regarding framework agreements" sponsored by the Carlsberg...... Foundation. Before taking up her present position she carried out her doctoral research in Denmark and Australia and worked at law offices in both Poland and the UK. The topic for today’s talk is framework agreements, a relatively popular way of undertaking public procurement...

  10. Block Transfer Agreement Evaluation Project

    Science.gov (United States)

    Bastedo, Helena

    2010-01-01

    The objective of this project is to evaluate for the British Columbia Council on Admissions and Transfer (BCCAT) the effectiveness of block transfer agreements (BTAs) in the BC Transfer System and recommend steps to be taken to improve their effectiveness. Findings of this study revealed that institutions want to expand block credit transfer;…

  11. 78 FR 14111 - Final Candidate Conservation Agreement With Assurances, Final Environmental Assessment, and...

    Science.gov (United States)

    2013-03-04

    ... development, wind energy development, loss of native rangelands to cropland conversion, herbicide use, fire... on multiple environmental and social factors, including potential impacts to the LEPC, the benefits... Assessment, and Finding of No Significant Impact; Lesser Prairie Chicken, Oklahoma AGENCY: Fish and...

  12. 77 FR 32115 - Notice of Agreements Filed

    Science.gov (United States)

    2012-05-31

    ... Agreement Western Mediterranean-U.S. East Coast. Parties: CMA CGM, S.A. and A.P. Moller-Maersk A/S. Filing.... Synopsis: The amendment would add Morocco to the geographic scope of the agreement. Agreement No.:...

  13. 78 FR 48163 - Notice of Agreements Filed

    Science.gov (United States)

    2013-08-07

    ..., Oregon as member to the agreement. Agreement No.: 012184-001. Title: Crowley/Maersk Line Panama--U.S. Space Charter Agreement. Parties: Crowley Latin America Services, LLC and A.P. Moller-Maersk A/S....

  14. 77 FR 45610 - Notice of Agreement Filed

    Science.gov (United States)

    2012-08-01

    ... (202) 523-5793 or tradeanalysis@fmc.gov . Agreement No.: 012125-001. Title: Maersk/Evergreen Slot Exchange Agreement. Parties: A.P. Moller-Maersk A/S and Evergreen Line Joint Service Agreement....

  15. 76 FR 20668 - Notice of Agreements Filed

    Science.gov (United States)

    2011-04-13

    ... amendment deletes Hanjin Shipping as a party to the Agreement. Agreement No.: 012105-001. Title: SCM Lines Transportes/CCNI Agreement. Parties: Compania Chilena de Navegacion Interoceanica S.A. and SCM...

  16. 30 CFR 936.30 - State-Federal Cooperative Agreement.

    Science.gov (United States)

    2010-07-01

    ..., the Federal land management agency, and other Federal agencies as required. The Secretary reserves the... period. The ratio or cost split of Federal to non-Federal dollars allocated under this Agreement will be... ratio will be applied to the final eligible total State expenditures to arrive at the total...

  17. The General Unenforceability of Collective Agreements under Nigerian Labour Jurisprudence: The Paradox of Agreement without Agreement

    Directory of Open Access Journals (Sweden)

    Vincent Iwunze

    2013-12-01

    Full Text Available This study considers the status of collective agreements under Nigerian labour law, examining the extent of their enforceability under the extant laws. It considers the emerging trends in some more advanced jurisdictions of the world in that regard and comparatively portrays the anachronisms of the Nigerian law on the point. It takes the position that the current legal climate as regards the legal status of collective agreements under Nigerian law is potentially disruptive of industrial peace and harmony and is bound to occasion serious hardship on employees. The work suggests among others a jurisprudential shift in paradigm if the Nigerian labour jurisprudence must meet and be reflective of modern socio-economic realities.

  18. Between voluntary agreement and legislation

    DEFF Research Database (Denmark)

    Gwozdz, Wencke; Hedegaard, Liselotte; Reisch, Lucia

    2009-01-01

    Voluntary agreements and self-imposed standards are broadly applied to restrict the influence food advertising exerts on children’s food choices – yet their effects are unknown. The current project will therefore investigate whether and, if yes, how the Danish Code for Responsible Food Marketing...... Communication towards Children (hereafter: CODE) – with its dependence on a supportive institutional environment and acceptance of as well as dynamics between involved key stakeholders like consumers, political actors and firms – contributes to fighting the obesity pandemic.Thus, we explore within this article...

  19. 7 CFR 1415.17 - Cooperative agreements.

    Science.gov (United States)

    2010-01-01

    ... the “right of enforcement” clause to read as set forth in the GRP cooperative agreement. This right is... 7 Agriculture 10 2010-01-01 2010-01-01 false Cooperative agreements. 1415.17 Section 1415.17... Cooperative agreements. (a) NRCS may enter into cooperative agreements which establish terms and...

  20. 75 FR 6397 - Notice of Agreements Filed

    Science.gov (United States)

    2010-02-09

    ....gov . Agreement No.: 011346-019. Title: Israel Trade Conference Agreement. Parties: A.P. Moller-Maersk A/S; Maersk Line Limited; and Zim Integrated Shipping Services, Ltd. Filing Party: Howard A. Levy...: The amendment adds American President Lines, Ltd. as a party to the agreement. Agreement No.:...

  1. 78 FR 33840 - Notice of Agreements Filed

    Science.gov (United States)

    2013-06-05

    ... (202)-523-5793 or tradeanalysis@fmc.gov . Agreement No.: 012037-005. Title: Maersk Line/CMA CGM...-003. Title: The World Liner Data Agreement. Parties: ANL Container Line Pty Ltd.; A.P. Moller-Maersk A.... Agreement No.: 012209. Title: APL/Maersk Line Slot Charter Agreement. Parties: American President Lines,...

  2. 75 FR 82025 - Notice of Agreements Filed

    Science.gov (United States)

    2010-12-29

    ... amendment updates the corporate addresses of APL and Hyundai. Agreement No.: 011928-005. Title: Maersk Line... Line Vessel Sharing Agreement. Parties: Hamburg-Sud and A.P. Moeller-Maersk A/S. Filing Party: Wayne... services under the agreement. Agreement No.: 012057-005. Title: CMA CGM/Maersk Line Space Charter,...

  3. 77 FR 58140 - Notice of Agreements Filed

    Science.gov (United States)

    2012-09-19

    ... Liner Service Ltd. Agreement No.: 012037-004. Title: Maersk Line/CMA CGM TA3 Space Charter Agreement. Parties: A.P. Moeller-Maersk A/S and CMA CGM S.A. Filing Party: Wayne R. Rohde, Esq.; Cozen O'Connor; 1627... amount of space being chartered to CMA CGM by Maersk Line under the agreement. Agreement No.:...

  4. 77 FR 1689 - Notice of Agreements Filed

    Science.gov (United States)

    2012-01-11

    ... Vietnam. Agreement No.: 012151. Title: Maersk Line/MSC WCCA Space Charter Agreement. Parties: A.P. Moller-Maersk A/S and MSC Mediterranean Shipping Company, S.A. Filing Party: Wayne R. Rohde, Esquire; Cozen O... . Agreement No.: 012150. Title: COSCON/POS Space Charter and Sailing Agreement. Parties: COSCO Container...

  5. 77 FR 61751 - Notice of Agreements Filed

    Science.gov (United States)

    2012-10-11

    ... restates the Agreement. Agreement No.: 012184-000. Title: Crowley/Maersk Line Panama-U.S. Space Charter Agreement. Parties: Crowley Latin America Services, LLC and A.P. Moller-Maersk A/S Filing Party: Wayne R... agreement authorizes Crowley to charter space to Maersk Line in the trade from Panama to the U.S....

  6. 25 CFR 163.71 - Agreement funding.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Agreement funding. 163.71 Section 163.71 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER GENERAL FORESTRY REGULATIONS Cooperative Agreements § 163.71 Agreement funding. In cooperative agreements, the Secretary is authorized to advance...

  7. 7 CFR 947.111 - Marketing agreement.

    Science.gov (United States)

    2010-01-01

    ... Definitions § 947.111 Marketing agreement. Marketing agreement means Marketing Agreement No. 114, as amended. ... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 947.111 Section 947.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE...

  8. NETL-EERC ENVIRONMENTAL MANAGEMENT COOPERATIVE AGREEMENT

    Energy Technology Data Exchange (ETDEWEB)

    Christina B. Behr-Andres; Daniel J. Daly

    2001-07-31

    This final report summarizes the accomplishments of the 6-year Environmental Management Cooperative Agreement (EMCA) between the Energy and Environmental Research Center (EERC), a nonprofit, contract-supported unit of the University of North Dakota, and the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The first portion of the report summarizes EMCA's structure, activities, and accomplishments. The appendix contains profiles of the individual EMCA tasks. Detailed descriptions and results of the tasks can be found separately in published Final Topical Reports. EMCA (DOE Contract No. DE-FC21-94MC31388) was in place from the fall of 1994 to the summer of 2001. Under EMCA, approximately $5.4 million was applied in three program areas to expedite the commercialization of 15 innovative technologies for application in DOE's EM Program ($3.8 million, or 69% of funds), provide technical support to the Deactivation and Decommissioning Focus Area (DDFA; $1.04 million, or 19% of funds), and provide for the coordination of the EMCA activities ($0.62 million, or 11% of funds). The following sections profile the overall accomplishments of the EMCA program followed by a summary of the accomplishments under each of the EMCA areas: commercialization, DDFA technical support, and management. Table 1 provides an overview of EMCA, including program areas, program activities, the duration and funding of each activity, and the associated industry partner, if appropriate.

  9. HPCC technology awareness program: Improved economic competitiveness through technology awareness, transfer and application. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    A need has been defined by Congress for the DOE National Laboratories to participate in various dual use and technology transfer programs. This requirement has spawned several technology transfer approaches at the DOE laboratories. These programs are designed to encourage large and small business to bring their problems and needs forward, and to allow the labs to transfer effective high performance computing technology to the commercial marketplace. This IG Technologies grant from the DOE was undertaken to address the issues and problems associated with technology transfer between the DOE National Laboratories and commercial industry. The key focus is to gain an understanding of how DOE and industry independently and collectively view the requirements and the missing elements that could allow DOE to facilitate HPCC technology transfer. At issue is HPCC Technology Transfer for the High Performance Computing industry and its relationship to the DOE National Laboratories. Several observations on this are addressed. The issue of a ``Technology Utilization Gap`` between the National Laboratories and Independent Software Vendors is discussed. This study addressed the HPCC Technology Transfer plans of all six DOE National Labs. Study team members briefed numerous industrial users of HPCC technology as to the feasibility of technology transfer for various applications. Significant findings of the effort are that the resistance to technology transfer is much higher than anticipated for both the National Labs and industry. Also, HPCC Technology Transfer is observed to be a large company`s dominion. Small businesses have a difficult time in addressing the requirements of technology transfer using Cooperative Research and Development Agreements (CRADA`s). Large businesses and the DOE National Labs however, often have requirements and objectives which are at cross purposes, making effective technology transfer difficult.

  10. Exploration of Novel Reaction Pathway for Formation of Copper Indium Gallium Diselenide: Cooperative Research and Development Final Report, CRADA Number CRD-03-121

    Energy Technology Data Exchange (ETDEWEB)

    van Hest, M.

    2014-11-01

    The investigation will explore a potentially low-cost method of forming CIGS for use in solar cells. Investigators from HelioVolt will work in NREL laboratories to modify and apply our tools in fabrication of the CIGS layer. Investigators from NREL will assist in preparing substrates and in compleing solar cells composed of these CIGS layers to evaluate the effectiveness of the HelioVolt processes.

  11. Catalytic Depolymerization and Upgrading of Lignin for Vanillin Production: Cooperative Research and Development Final Report, CRADA Number CRD-14-545

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-31

    Examine catalytic conversion of lignin using multifunctional catalysts that are able to depolymerize and oxidize lignin to a vanillin-rich stream. Examine separation processes for isolation of vanillin from product mixtures. Conduct preliminary experiments to determine if deconstructed lignin streams can be metabolized by Pseudomonas putida.

  12. Application of Robust Design and Advanced Computer Aided Engineering Technologies: Cooperative Research and Development Final Report, CRADA Number CRD-04-143

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, M.

    2013-06-01

    Oshkosh Corporation (OSK) is taking an aggressive approach to implementing advanced technologies, including hybrid electric vehicle (HEV) technology, throughout their commercial and military product lines. These technologies have important implications for OSK's commercial and military customers, including fleet fuel efficiency, quiet operational modes, additional on-board electric capabilities, and lower thermal signature operation. However, technical challenges exist with selecting the optimal HEV components and design to work within the performance and packaging constraints of specific vehicle applications. SK desires to use unique expertise developed at the Department of Energy?s (DOE) National Renewable Energy Laboratory (NREL), including HEV modeling and simulation. These tools will be used to overcome technical hurdles to implementing advanced heavy vehicle technology that meet performance requirements while improving fuel efficiency.

  13. CRADA Final Report for NFE-08-01826: Development and application of processing and processcontrol for nano-composite materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, C.; Armstrong, B.; Maxey, C.; Sabau, A.; Wang, H.; Hagans, P. (A123 Systems, Inc.); and Babinec, S. (A123 Systems, Inc.)

    2012-12-15

    Oak Ridge National Laboratory and A123 Systems, Inc. collaborated on this project to develop a better understanding, quality control procedures, and safety testing for A123 System’s nanocomposite separator (NCS) technology which is a cell based patented technology and separator. NCS demonstrated excellent performance. x3450 prismatic cells were shown to survive >8000 cycles (1C/2C rate) at room temperature with greater than 80% capacity retention with only NCS present as an alternative to conventional polyolefin. However, for a successful commercialization, the coating conditions required to provide consistent and reliable product had not been optimized and QC techniques for being able to remove defective material before incorporation into a cell had not been developed. The work outlined in this report addresses these latter two points. First, experiments were conducted to understand temperature profiles during the different drying stages of the NCS coating when applied to both anode and cathode. One of the more interesting discoveries of this study was the observation of the large temperature decrease experienced by the wet coating between the end of the infrared (IR) drying stage and the beginning of the exposure to the convection drying oven. This is not a desirable situation as the temperature gradient could have a deleterious effect on coating quality. Based on this and other experimental data a radiative transfer model was developed for IR heating that also included a mass transfer module for drying. This will prove invaluable for battery coating optimization especially where IR drying is being employed. A stress model was also developed that predicts that under certain drying conditions tensile stresses are formed in the coating which could lead to cracking that is sometimes observed after drying is complete. Prediction of under what conditions these stresses form is vital to improving coating quality. In addition to understanding the drying process other parameters such as slurry quality and equipment optimization were examined. Removal of particles and gels by filtering, control of viscosity by %solids and mixing adjustments, removal of trapped gas in the slurry and modification of coater speed and slot die gap were all found to be important for producing uniform and flaw-free coatings. Second, an in-line Hi-Pot testing method has been developed specifically for NCS that will enable detection of coating flaws that could lead to soft or hard electrical shorts within the cell. In this way flawed material can be rejected before incorporation into the cell thus greatly reducing the amount of scrap that is generated. Improved battery safety is an extremely important benefit of NCS. Evaluation of battery safety is usually accomplished by conducting a variety of tests including nail penetration, hot box, over charge, etc. For these tests entire batteries must be built but the resultant temperature and voltage responses reveal little about the breakdown mechanism. In this report is described a pinch test which is used to evaluate NCS quality at various stages including coated anode and cathode as well as assembled cell. Coupled with post-microscopic examination of the damaged ‘pinch point’ test data can assist in the coating optimization from an improved end-use standpoint. As a result of this work two invention disclosures, one for optimizing drying methodology and the other for an in-line system for flaw detection, have been filed. In addition, 2 papers are being written for submission to peer-reviewed journals.

  14. NREL and SDG&E Collaboration to Support SDG&E Grid and Storage Efforts: Cooperative Research and Development Final Report, CRADA Number CRD-14-562

    Energy Technology Data Exchange (ETDEWEB)

    Baggu, Murali [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-01-01

    This project will enable effective utilization of high penetration of photovoltaics (PV) in islanded microgrids, increasing overall system efficiency, decreased fuel costs and resiliency of the overall system to help meet the SunShot goals of enhancing system integration methods to increase penetration of PV. National Renewable Energy Laboratory (NREL) will collaborate with San Diego Gas & Electric (SDG&E) to provide research and testing support to address their needs in energy storage sizing and placement, Integrated Test Facility (ITF) development, Real Time Digital Simulator (RTDS) Modeling and simulation support at ITF, Visualization and Virtual connection to Energy Systems Integration Facility (ESIF), and microgrid simulation and testing areas. Specifically in this project a real microgrid scenario with high penetration of PV (existing in SDG&E territory) is tested in the ESIF laboratory. Multiple control cases for firming PV using storage in a microgrid scenario will be investigated and tested in the laboratory setup.

  15. Studies on the impact, detection, and control of microbiology influenced corrosion related to pitting failures in the Russian oil and gas industry. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Ehst, D.

    2006-09-30

    The objectives of the Project are: (1) to design effective anti-corrosion preparations (biocides, inhibitors, penetrants and their combinations) for gas- and oil-exploration industries; (2) to study a possibility of development of environmentally beneficial ('green') biocides and inhibitors of the new generation; (3) to develop chemical and microbiological methods of monitoring of sites at risk of corrosion; and (4) to evaluate potentialities in terms of technology, raw materials and material and technical basis to set up a production of effective anti-corrosion preparations of new generation in Russia. During the four years of the project 228 compounds and formulations were synthesized and studied in respect to their corrosion inhibiting activity. A series of compounds which were according to the Bubble tests more efficient (by a factor of 10-100) than the reference inhibitor SXT-1102, some possessing the similar activity or slightly better activity than new inhibitor ??-1154? (company ONDEO/Nalco). Two synthetic routes for the synthesis of mercaptopyrimidines as perspective corrosion inhibitors were developed. Mercaptopyrimidine derivatives can be obtained in one or two steps from cheap and easily available precursors. The cost for their synthesis is not high and can be further reduced after the optimization of the production processes. A new approach for lignin utilization was proposed. Water-soluble derivative of lignin can by transformed to corrosion protective layer by its electropolymerization on a steel surface. Varying lignosulfonates from different sources, as well as conditions of electrooxidation we proved, that drop in current at high anodic potentials is due to electropolymerization of lignin derivative at steel electrode surface. The electropolymerization potential can be sufficiently decreased by an increase in ionic strength of the growing solution. The lignosulfonate electropolymerization led to the considerable corrosion protection effect of carbon steel. More than three times decrease of corrosion rate on steel surface was observed after lignosulfonate electropolymerization, exceeding protective effect of standard commercially available corrosion inhibitor. Solikamsky lignin could be a promising candidate as a base for the development of the future green corrosion inhibitor. A protective effect of isothiazolones in compositions with other biocides and inhibitors was investigated. Additionally to high biocidal properties, combination of kathon 893 and copper sulfate may also produce a strong anticorrosion effect depending on concentrations of the biocides. Based on its joint biocidal and anticorrosion properties, this combination can be recommended for protection of pipelines against carbon dioxide-induced corrosion. By means of linear polarization resistance test, corrosion properties of biocides of different classes were studied. Isothiazolones can be recommended for treating oil-processing waters in Tatarstan to curb carbon dioxide - induced corrosion. A laboratory research on evaluation of the efficiency of biocides, inhibitors and penetrants by biological and physical-and-chemical methods has been carried out. It was shown that action of corrosion inhibitors and biocides strongly depends on character of their interaction with mineral substances available in waters on oil-exploration sites. It was found that one of approaches to designing environmentally safe ('green') antimicrobial formulations may be the use of synergetic combinations, which allow one to significantly decrease concentrations of biocides. It was shown that the efficacy of biocides and inhibitors depends on physicochemical characteristics of the environment. Anticorrosion and antimicrobial effects of biocides and inhibitors depended in much on the type of medium and aeration regimen. Effects of different biocides, corrosion inhibitors. penetrants and their combinations on the biofilm were investigated. It has been shown that minimal inhibiting concentrations of the reagents for the biofilm are much higher than t

  16. Development of an Ultra-Low-Cost Solar Water Heater: Cooperative Research and Development Final Report, CRADA Number CRD-12-487

    Energy Technology Data Exchange (ETDEWEB)

    Merrigan, Tim [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-17

    NREL and RhoTech will collaborate to bring long-lived, ultra-low-cost, high-performance solar water heaters (SWH) to market readiness. An existing RhoTech design uses seam-welded polymer thin films to make an unglazed thermosiphon, and this design will be modified to improve durability through ultraviolet and overheat protection, and to improve performance by adding a glazing to the collector. Two generations of the new glazed systems will be tested in the field, resulting in a robust market-ready SWH design that can be installed for under $1,000 without rebates.

  17. Defining the Interactions of Cellobiohydrolase with Substrate through Structure Function Studies: Cooperative Research and Development Final Report, CRADA Number CRD-10-409

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, G. T.; Himmel, M. E.

    2013-07-01

    NREL researchers will use their expertise and skilled resources in numerical computational modeling to generate structure-function relationships for improved cellulase variant enzymes to support the development of cellulases with improved performance in biomass conversion.

  18. Spectroscopic Studies of Photosynthetic Systems and Their Application in Photovoltaic Devices - Equipment Only: Cooperative Research and Development Final Report, CRADA Number CRD-06-175

    Energy Technology Data Exchange (ETDEWEB)

    Seibert, M.

    2014-09-01

    Spectral hole-burning (SHB) and single photosynthetic complex spectroscopy (SPCS) will be used to study the excitonic structure and excitation energy transfer (EET) processes of several photosynthetic protein complexes at low temperatures. The combination of SHB on bulk samples and SPCS is a powerful frequency domain approach for obtaining data that will address a number of issues that are key to understanding excitonic structure and energy transfer dynamics. The long-term goal is to reach a better understanding of the ultrafast solar energy driven primary events of photosynthesis as they occur in higher plants, cyanobacteria, purple bacteria, and green algae. A better understanding of the EET and charge separation (CS) processes taking place in photosynthetic complexes is of great interest, since photosynthetic complexes might offer attractive architectures for a future generation of circuitry in which proteins are crystallized.

  19. Base-Catalyzed Depolymerization of Lignin with Heterogeneous Catalysts: Cooperative Research and Development Final Report, CRADA Number CRD-13-513

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-08-04

    We will synthesize and screen solid catalysts for the depolymerization of lignin to monomeric and oligomeric oxygenated species, which could be fractionated and integrated into refinery intermediate streams for selective upgrading, or catalytically upgraded to fuels and chemicals. This work will primarily focus on the synthesis and application of layered double hydroxides (LDHs) as recyclable, heterogeneous catalysts for depolymerization of lignin model compounds and softwood lignin. LDHs have been shown in our group to offer good supports and catalysts to promote base-catalyzed depolymerization of lignin model compounds and in preliminary experiments for the depolymerization of lignin from an Organosolv process. We will also include additional catalyst supports such as silica, alumina, and carbon as identified in ongoing and past efforts at NREL. This work will consist of two tasks. Overall, this work will be synergistic with ongoing efforts at NREL, funded by the DOE Biomass Program, on the development of catalysts for lignin depolymerization in the context of biochemical and thermochemical conversion of corn stover and other biomass feedstocks to advanced fuels and chemicals.

  20. Infrastructure, Components and System Level Testing and Analysis of Electric Vehicles: Cooperative Research and Development Final Report, CRADA Number CRD-09-353

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, J.

    2013-05-01

    Battery technology is critical for the development of innovative electric vehicle networks, which can enhance transportation sustainability and reduce dependence on petroleum. This cooperative research proposed by Better Place and NREL will focus on predicting the life-cycle economics of batteries, characterizing battery technologies under various operating and usage conditions, and designing optimal usage profiles for battery recharging and use.

  1. Development and Demonstration of Grid Integration System for PEVs, ESS, and RE: Cooperative Research and Development Final Report, CRADA Number CRD-13-515

    Energy Technology Data Exchange (ETDEWEB)

    Markel, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-05-01

    NREL and Ideal Power Converters (IPC) will jointly develop and demonstrate a hybrid power converter system integrating bi-directional electric vehicle charging, photovoltaic generation, and stationary battery storage using IPC's 3-Port Hybrid Converter. The organizations will also jointly investigate synergies in tightly integrating these separate power conversion systems.

  2. Pilot Scale Integrated Biorefinery for Producing Ethanol from Hybrid Algae: Cooperative Research and Development Final Report, CRADA Number CRD-10-389

    Energy Technology Data Exchange (ETDEWEB)

    Pienkos, P. T.

    2013-11-01

    This collaboration between Algenol Biofuels Inc. and NREL will provide valuable information regarding Direct to Ethanol technology. Specifically, the cooperative R&D will analyze the use of flue gas from industrial sources in the Direct to Ethanol process, which may demonstrate the potential to significantly reduce greenhouse gas emissions while simultaneously producing a valuable product, i.e., ethanol. Additionally, Algenol Biofuels Inc. and NREL will develop both a techno-economic model with full material and energy balances and an updated life-cycle analysis to identify greenhouse gas emissions relative to gasoline, each of which will provide a better understanding of the Direct to Ethanol process and further demonstrate that it is a breakthrough technology with varied and significant benefits.

  3. Optical and Durability Evaluation for Silvered Polymeric Mirrors and Reflectors: Cooperative Research and Development Final Report, CRADA Number, CRD-08-316

    Energy Technology Data Exchange (ETDEWEB)

    Gray, M.

    2014-08-01

    3M is currently developing silvered polymeric mirror reflectors as low-cost replacements for glass mirrors in concentrating solar power (CSP) systems. This effort is focused on development of reflectors comprising both metallized polymeric mirror films based on improved versions of ECP-305+ or other durable mirror film concepts and appropriate mechanically robust substrates. The objectives for this project are to reduce the system capital and operating costs and to lower the levelized cost of energy for CSP installations. The development of mirror reflectors involves work on both full reflectors and mirror films with and without coatings. Mirror reflectors must meet rigid optical specifications in terms of radius of curvature, slope errors and specularity. Mirror films must demonstrate long-term durability and maintain high reflectivity. 3M would like to augment internal capabilities to validate product performance with methods and tools developed at NREL to address these areas.

  4. Development of Kinetics and Mathematical Models for High-Pressure Gasification of Lignite-Switchgrass Blends: Cooperative Research and Development Final Report, CRADA Number CRD-11-447

    Energy Technology Data Exchange (ETDEWEB)

    Iisa, Kristiina [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-04-06

    NREL will work with Participant as a subtier partner under DE-FOA-0000240 titled "Co-Production of Power, Fuels, and Chemicals via Coal/Biomass Mixtures." The goal of the project is to determine the gasification characteristics of switchgrass and lignite mixtures and develop kinetic models. NREL will utilize a pressurized thermogravimetric analyzer to measure the reactivity of chars generated in a pressurized entrained-flow reactor at Participant's facilities and to determine the evolution of gaseous species during pyrolysis of switchgrass-lignite mixtures. Mass spectrometry and Fourier-transform infrared analysis will be used to identify and quantify the gaseous species. The results of the project will aid in defining key reactive properties of mixed coal biomass fuels.

  5. Collaboration on OPT Design for Generating Electrical Power from Ocean Waves. Cooperative Research and Development Final Report, CRADA Number CRD-14-542

    Energy Technology Data Exchange (ETDEWEB)

    LiVecchi, Al [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    In the proposed project, Ocean Power Technologies Corporation (OPT) and the National Renewable Energy Laboratory (NREL) will collaboratively investigate the power output and loads associated with an asymmetric float previously investigated and designed by OPT, but will extend the analysis to include a compliant mooring.

  6. Development of an Industry Dynamometer/Spin Test Facility--Equipment Only: Cooperative Research and Development Final Report, CRADA Number CRD-05-164

    Energy Technology Data Exchange (ETDEWEB)

    McDade, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    The Department of Energy/National Renewable Energy Laboratory (DOE/NREL) owns and operates a megawatt-scale dynamometer used for testing wind turbine drive trains up to 1.5 megawatt (MW) in rated capacity. At this time, this unit is the only unit of its type in the United States, available for use by the American Wind Industry. Currently this dynamometer is heavily backlogged and unavailable to provide testing needed by various wind industry members. DOE/NREL is in possession of two critical pieces of equipment that may be used to develop an alternative Dynamometer facility, but does not have the funds or other resources necessary to develop such a facility. The Participant possesses complimentary facilities and infrastructure that when combined with the NREL equipment can create such a test facility. The Participant is also committed to expending funds to develop and operate such a facility to the subsequent benefit of the Wind Industry and DOE Wind Energy program. In exchange for DOE/NREL providing the critical equipment, the Participant will grant DOE/NREL a minimum of 90 days of testing time per year in the new facility while incurring no facilities fees.

  7. Wind Energy R&D Collaboration between NIRE and NREL: Cooperative Research and Development Final Report, CRADA Number CRD-11-437

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, P.

    2015-01-01

    This work includes, but is not limited to, research and development of joint technology development and certification efforts in the wind power sector; providing access to commercial wind farm and federal facilities to enhance R&D; identification of workforce development best practices. This work will be done at Contractor and Participant facilities.

  8. Studies on the impact, detection, and control of microbiology influenced corrosion related to pitting failures in the Russian oil and gas industry. Final CRADA report.

    Energy Technology Data Exchange (ETDEWEB)

    Ehst, D.

    2006-09-30

    The objectives of the Project are: (1) to design effective anti-corrosion preparations (biocides, inhibitors, penetrants and their combinations) for gas- and oil-exploration industries; (2) to study a possibility of development of environmentally beneficial ('green') biocides and inhibitors of the new generation; (3) to develop chemical and microbiological methods of monitoring of sites at risk of corrosion; and (4) to evaluate potentialities in terms of technology, raw materials and material and technical basis to set up a production of effective anti-corrosion preparations of new generation in Russia. During the four years of the project 228 compounds and formulations were synthesized and studied in respect to their corrosion inhibiting activity. A series of compounds which were according to the Bubble tests more efficient (by a factor of 10-100) than the reference inhibitor SXT-1102, some possessing the similar activity or slightly better activity than new inhibitor ??-1154? (company ONDEO/Nalco). Two synthetic routes for the synthesis of mercaptopyrimidines as perspective corrosion inhibitors were developed. Mercaptopyrimidine derivatives can be obtained in one or two steps from cheap and easily available precursors. The cost for their synthesis is not high and can be further reduced after the optimization of the production processes. A new approach for lignin utilization was proposed. Water-soluble derivative of lignin can by transformed to corrosion protective layer by its electropolymerization on a steel surface. Varying lignosulfonates from different sources, as well as conditions of electrooxidation we proved, that drop in current at high anodic potentials is due to electropolymerization of lignin derivative at steel electrode surface. The electropolymerization potential can be sufficiently decreased by an increase in ionic strength of the growing solution. The lignosulfonate electropolymerization led to the considerable corrosion protection effect of carbon steel. More than three times decrease of corrosion rate on steel surface was observed after lignosulfonate electropolymerization, exceeding protective effect of standard commercially available corrosion inhibitor. Solikamsky lignin could be a promising candidate as a base for the development of the future green corrosion inhibitor. A protective effect of isothiazolones in compositions with other biocides and inhibitors was investigated. Additionally to high biocidal properties, combination of kathon 893 and copper sulfate may also produce a strong anticorrosion effect depending on concentrations of the biocides. Based on its joint biocidal and anticorrosion properties, this combination can be recommended for protection of pipelines against carbon dioxide-induced corrosion. By means of linear polarization resistance test, corrosion properties of biocides of different classes were studied. Isothiazolones can be recommended for treating oil-processing waters in Tatarstan to curb carbon dioxide - induced corrosion. A laboratory research on evaluation of the efficiency of biocides, inhibitors and penetrants by biological and physical-and-chemical methods has been carried out. It was shown that action of corrosion inhibitors and biocides strongly depends on character of their interaction with mineral substances available in waters on oil-exploration sites. It was found that one of approaches to designing environmentally safe ('green') antimicrobial formulations may be the use of synergetic combinations, which allow one to significantly decrease concentrations of biocides. It was shown that the efficacy of biocides and inhibitors depends on physicochemical characteristics of the environment. Anticorrosion and antimicrobial effects of biocides and inhibitors depended in much on the type of medium and aeration regimen. Effects of different biocides, corrosion inhibitors. penetrants and their combinations on the biofilm were investigated. It has been shown that minimal inhibiting concentrations of the reagents for the biofilm are much higher than those for aquatic microorganisms. Results obtained from the research in stationary conditions have been confirmed with data from experiments carried out in hydrodynamic conditions. New approaches to the investigation of biocorrosive processes on the basis of bioluminescent method of intracellular ATP determination have been developed. Approaches and methods developed on the basis of bioluminescent method could significantly simplify the analysis of biocorrosion processes and allow to conduct the analysis directly under the field conditions in situ. An express method to assess biogenic sulfate reduction in soil and water samples has been elaborated. The method intends for field application and allows one to no-problem assess action of such harmful and corrosion provoking microorganisms, as sulfate-reducing bacteria.

  9. Novel Biological Conversion of Hydrogen and Carbon Dioxide Directly into Biodiesel: Cooperative Research and Development Final Report, CRADA Number: CRD-10-408

    Energy Technology Data Exchange (ETDEWEB)

    Maness, P. C.

    2014-06-01

    OPX Biotechnologies, Inc. (OPX), the National Renewable Energy Laboratory (NREL), and Johnson Matthey will develop and optimize a novel, engineered microorganism that directly produces biodiesel from renewable hydrogen (H2) and carbon dioxide (CO2). The proposed process will fix CO2 utilizing H2 to generate an infrastructure-compatible, energy-dense fuel at costs of less than $2.50 per gallon, with water being produced as the primary byproduct. NREL will perform metabolic engineering on the bacterium Cupriavidus necator (formerly Ralstonia eutropha) and a techno-economic analysis to guide future scale-up work. H2 and CO2 uptakes rates will be genetically increased, production of free fatty acids will be enhanced and their degradation pathway blocked in order to meet the ultimate program goals.

  10. Evaluation of Solar Grade Silicon Produced by the Institute of Physics and Technology: Cooperative Research and Development Final Report, CRADA Number CRD-07-211

    Energy Technology Data Exchange (ETDEWEB)

    Page, M.

    2013-02-01

    NREL and Solar Power Industries will cooperate to evaluate technology for producing solar grade silicon from industrial waste of the phosphorus industry, as developed by the Institute of Physics and Technology (IPT), Kazakhstan. Evaluation will have a technical component to assess the material quality and a business component to assess the economics of the IPT process. The total amount of silicon produced by IPT is expected to be quite limited (50 kg), so evaluations will need to be done on relatively small quantities (≈ 5 kg/sample).

  11. Investigations of the in Planta Expression of Active Cellobiohydrolase I: Cooperative Research and Development Final Report, CRADA Number CRD-07-219

    Energy Technology Data Exchange (ETDEWEB)

    Himmel, M.

    2011-02-01

    It was the purpose of this project to determine if cellulases produced in transgenic plants could effectively be utilized in the production of ethanol and other feedstock chemicals from lignocellulosic substrates.

  12. CRADA with Teledyne Electronic Technologies and Pacific Northwest National Laboratory (PNL-096): The Exposure-to-Risk monitoring system. Final letter report

    Energy Technology Data Exchange (ETDEWEB)

    Thrall, K.D.

    1996-10-01

    The purpose of this project was to demonstrate the ``Exposure-to- Risk`` monitoring system in an actual occupational environment. The system is a unique combination of existing hardware with proprietary software to create an integrated means of assessing occupational exposures to volatile organic compounds. One component of this system utilizes a portable mass spectrometer developed by Teledyne Electronic Technologies. Integration of the system was accomplished under Laboratory Directed Research and Development (LDRD) funding. Commercialization of the system will take place following demonstration in an actual occupational environment, and will include, in part, Teledyne Electronic Technologies. The Exposure-to-Risk monitoring system will benefit DOE by overcoming present-day limitations in worker health protection monitoring. There are numerous sites within the` DOE complex where many different hazardous chemicals are used on a routine basis. These chemicals range from paint stripers and cleaning solvents to chemical warfare agents, each having its own degree of potential adverse health risk to a worker. Thus, a real concern for DOE is to ensure that a worker is properly monitored to assess any adverse health risk from exposure to potentially hazardous chemicals. With current industrial hygiene technologies, this is an arduous task. The Exposure-to-Risk monitoring system integrates a patented breath-inlet device connecting a subject`s exhaled breath directly with a field-portable mass spectrometer with physiologically based pharmacokinetic (PBPK) modeling to estimate the target tissue dose following a chemical exposure. Estimation of the adverse health risk prediction follows from the exposure/dose calculation based on currently accepted methodologies. This new system can determine, in the field, the possible adverse health risks on a daily basis to an individual worker.

  13. Portfolio-Scale Optimization of Customer Energy Efficiency Incentive and Marketing: Cooperative Research and Development Final Report, CRADA Number CRD-13-535

    Energy Technology Data Exchange (ETDEWEB)

    Brackney, Larry J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-17

    North East utility National Grid (NGrid) is developing a portfolio-scale application of OpenStudio designed to optimize incentive and marketing expenditures for their energy efficiency (EE) programs. NGrid wishes to leverage a combination of geographic information systems (GIS), public records, customer data, and content from the Building Component Library (BCL) to form a JavaScript Object Notation (JSON) input file that is consumed by an OpenStudio-based expert system for automated model generation. A baseline model for each customer building will be automatically tuned using electricity and gas consumption data, and a set of energy conservation measures (ECMs) associated with each NGrid incentive program will be applied to the model. The simulated energy performance and return on investment (ROI) will be compared with customer hurdle rates and available incentives to A) optimize the incentive required to overcome the customer hurdle rate and B) determine if marketing activity associated with the specific ECM is warranted for that particular customer. Repeated across their portfolio, this process will enable NGrid to substantially optimize their marketing and incentive expenditures, targeting those customers that will likely adopt and benefit from specific EE programs.

  14. Residential PV-Energy Storage Testing Collaboration with SunPower: Cooperative Research and Development Final Report, CRADA Number CRD-14-569

    Energy Technology Data Exchange (ETDEWEB)

    Lundstrom, Blake [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    Residential scale energy storage devices have shown great promise to add value and improve the ability to integrate distributed and variable generation into the distribution grid. Battery energy storage systems combined with PV and advanced inverters can provide many services. These include extended backup power in case of grid failure, reductions in feeder and system level peak load, system level net load ramp reduction, grid management services both locally (e.g., voltage management) and bulk system (e.g., reserves) level, and improved grid reliability through grid voltage and frequency support. Even though the cost of the energy storage systems are decreasing, one of the main challenges related to the widespread deployment of energy storage, as found by the U.S. Department of Energy (DOE), is utility acceptance of storage technologies. Various interconnection challenges exist when connecting distributed PV-energy storage into the electrical distribution grid in terms of safety, reliability and stability of the electric power systems. Some of the urgent challenges, as seen by the manufacturers and installers are: safety of the battery cells and the packs, performance of the power conversion systems, effect of bidirectional power flow on existing utility equipment and qualification of solutions such as volt-ampere reactive (VAR) support and frequency regulation. Under this project, National Renewable Energy Laboratory (NREL) researchers will work with SunPower to address these challenges by research, testing and analysis at Energy System Integration Facility (ESIF) and energy storage testing laboratory at NREL. NREL's unique power hardware-in-the-loop (PHIL) capability will be utilized to evaluate system-level issues such as reverse power flow and VAR support (if available) for these PV-energy storage systems. Through the analysis of test results, the proposed project will demonstrate use of ESIF capabilities in a way that advances both the DOE and SunPower's goals of moving clean, renewable energy technologies onto the electrical grid.

  15. 78 FR 50424 - NIH Cooperative Research and Development Agreement Program: Invitation To Solicit Nonclinical and...

    Science.gov (United States)

    2013-08-19

    .... The collaboration will be governed by CRADA terms that address intellectual property rights... resources to be contributed by the collaborator (e.g., scientific expertise, R&D support, proprietary materials, and funding), and the NIH IC (e.g., scientific expertise, R&D support, and proprietary...

  16. 22 CFR 124.1 - Manufacturing license agreements and technical assistance agreements.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Manufacturing license agreements and technical... ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.1 Manufacturing... manufacturing license agreements, technical assistance agreements, distribution agreements, or...

  17. 76 FR 72408 - Notice of Agreements Filed

    Science.gov (United States)

    2011-11-23

    ....S. East coast. Agreement No.: 012146. Title: HLAG/HSDG USWC-Mediterranean Vessel Sharing Agreement..., Morocco, Panama, Colombia, the Dominican Republic, Canada, and Mexico. By Order of the Federal...

  18. 75 FR 37805 - Notice of Agreements Filed

    Science.gov (United States)

    2010-06-30

    ....gov . Agreement No.: 012032-005. Title: CMA CGM/MSC/Maersk Line North and Central China-US Pacific Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties: A.P. Moller-Maersk...

  19. 78 FR 57390 - Notice of Agreements Filed

    Science.gov (United States)

    2013-09-18

    ...; Washington, DC 20006-4007. Synopsis: The amendment deletes A.P. Moller Maersk A/S trading under the name of Maersk Line as a party to the agreement. Agreement No.: 201157-003. Title: USMX-ILA Master...

  20. 76 FR 12962 - Notice of Agreements Filed

    Science.gov (United States)

    2011-03-09

    ... trade. Agreement No.: 012032-007. Title: CMA CGM/MSC/Maersk Line North and Central China-US Pacific Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties: A.P. Moller-Maersk...

  1. TRIPs Agreement, Important Multilateral WTO Treaty

    Directory of Open Access Journals (Sweden)

    Oana-Maria Florescu

    2006-08-01

    Full Text Available This article aims at presenting the content and the frame of the TRIPs. Agreement. It starts by introducing the reader to the terms that defined the world economical climate by the time of the Agreement negociation. Also, it explains the need of having an Agreement on intellectual property rights with impact on the business world. Moreover, the article reviews the main provisions of the Agreement and the most important intellectual property rights.

  2. Analysis of Information Leakage in Quantum Key Agreement

    Institute of Scientific and Technical Information of China (English)

    LIU Sheng-li; ZHENG Dong; CHENG Ke-fei

    2006-01-01

    Quantum key agreement is one of the approaches to unconditional security. Since 1980's, different protocols for quantum key agreement have been proposed and analyzed. A new quantum key agreement protocol was presented in 2004, and a detailed analysis to the protocol was given. The possible game played between legitimate users and the enemy was described:sitting in the middle, an adversary can play a "man-in-the-middle" attack to cheat the sender and receiver. The information leaked to the adversary is essential to the length of the final quantum secret key. It was shown how to determine the amount of information leaked to the enemy and the amount of uncertainty between the legitimate sender and receiver.

  3. 47 CFR 27.602 - Lease agreements.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Lease agreements. 27.602 Section 27.602... Lease agreements. Guard Band licensees may enter into spectrum leasing arrangements under part 1... following conditions: (a) The spectrum lease agreement between the licensee and the spectrum lessee...

  4. 77 FR 38288 - Notice of Agreement Filed

    Science.gov (United States)

    2012-06-27

    ... . Agreement No.: 012177. Title: MSC/Maersk Line U.S.-Panama Space Charter Agreement. Parties: Mediterranean Shipping Company S.A. and A.P. Moller-Maersk A/S, trading under the name Maersk Line. Filing Party: Wayne R... agreement authorizes MSC to charter space to Maersk Line in the trade between ports in Panama and ports...

  5. 75 FR 3466 - Notice of Agreement Filed

    Science.gov (United States)

    2010-01-21

    ... . Agreement No.: 012048-001. Title: The Container Trades Statistics Agreement. Parties: A.P. Moeller-Maersk A/S; China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Ltd.; CMA CGM S.A.; Compania Sudamericana de Vapores S.A.; Evergreen Line Joint Service Agreement; Hamburg Sud KG;...

  6. 76 FR 22104 - Notice of Agreements Filed

    Science.gov (United States)

    2011-04-20

    .... Title: Hamburg Sud/Maersk Line Vessel Sharing Agreement. Parties: Hamburg-Sud and A.P. Moeller-Maersk A... 20006. Synopsis: The amendment would revise the amount of capacity provided by Maersk Line and revise... Agreement. Parties: A.P. Moller-Maersk A/S and Evergreen Line Joint Service Agreement. Filing Parties:...

  7. 76 FR 66304 - Notice of Agreements Filed

    Science.gov (United States)

    2011-10-26

    ....gov . Agreement No.: 012032-008. Title: CMA CGM/MSC/Maersk Line North and Central China-U.S. Pacific Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties: A.P. Moller-Maersk A/S... further slot exchange between Maersk Line and MSC with corresponding changes in the Agreement and...

  8. 75 FR 71704 - Notice of Agreements Filed

    Science.gov (United States)

    2010-11-24

    ....gov . Agreement No.: 012032-006. Title: CMA CGM/MSC/Maersk Line North and Central China-US Pacific Coast Two-Loop Space Charter, Sailing and Cooperative Working Agreement. Parties: A.P. Moller-Maersk A/S...: The World Liner Data Agreement. Parties: ANL Container Line Pty Ltd.; A.P. Moller-Maersk A/S; CMA...

  9. 76 FR 28778 - Notice of Agreements Filed

    Science.gov (United States)

    2011-05-18

    ... the parties' U.S. East Coast services from the agreement. Agreement No.: 012126. Title: Maersk Line...: The agreement authorizes Maersk Line to charter space to Dole in the trades between the U.S. Gulf...-Maersk A/S; CMA CGM S.A.; Hamburg-Sud; and Hapag-Lloyd AG. Filing Party: Wayne R. Rohde, Esq.; Cozen...

  10. 76 FR 44914 - Notice of Agreement Filed

    Science.gov (United States)

    2011-07-27

    ... at (202)-523-5793 or tradeanalysis@fmc.gov . Agreement No.: 012134. Title: Maersk Line/MSC Panama Space Charter Agreement. Parties: A.P. Moller-Maersk A/S and Mediterranean Shipping Company S.A. Filing.... Synopsis: The agreement authorizes MSC to charter space to Maersk Line in the trade from Panama to...

  11. 78 FR 55697 - Notice of Agreements Filed

    Science.gov (United States)

    2013-09-11

    ...; Hyundai Merchant Marine (America), Inc.; ``K'' Line America; Maersk Agency USA, Inc.; Mediterranean... Amendment removes Maersk as a party to the Agreement. Agreement No.: 012223. Title: Assessment Agreement of Carrier Members of United States Maritime Alliance, Ltd. Parties: APL, Ltd.; Atlantic Container...

  12. 78 FR 21364 - Notice of Agreements Filed

    Science.gov (United States)

    2013-04-10

    ....gov . Agreement No.: 012057-009. Title: CMA CGM/Maersk Line Space Charter, Sailing and Cooperative Working Agreement Asia to USEC and PNW-Suez/PNW & Panama Loops. Parties: A.P. Moller-Maersk A/S and CMA.... Parties: Evergreen Line Joint Service Agreement; Hanjin Shipping Co., Ltd; Nippon Yusen Kaisha; and...

  13. 7 CFR 900.109 - Mediation agreement.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Mediation agreement. 900.109 Section 900.109 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Mediation agreement. An agreement arrived at by mediation shall not become effective until approved by...

  14. 7 CFR 966.111 - Marketing Agreement.

    Science.gov (United States)

    2010-01-01

    ... and Regulations Definitions § 966.111 Marketing Agreement. Marketing Agreement means Marketing... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing Agreement. 966.111 Section 966.111 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE...

  15. 7 CFR 946.101 - Marketing agreement.

    Science.gov (United States)

    2010-01-01

    ... WASHINGTON Rules and Regulations Definitions § 946.101 Marketing agreement. Marketing agreement means... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 946.101 Section 946.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE...

  16. 7 CFR 917.101 - Marketing agreement.

    Science.gov (United States)

    2010-01-01

    ... CALIFORNIA Rules and Regulations Definitions § 917.101 Marketing agreement. Marketing agreement means... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing agreement. 917.101 Section 917.101 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE...

  17. 77 FR 58592 - Modified Norway Post Agreement

    Science.gov (United States)

    2012-09-21

    ... Modified Norway Post Agreement AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a recently-filed Postal Service request to include a modified Norway Post Agreement... existing bilateral agreement for inbound competitive services with Posten Norge AS (Modified Norway...

  18. The maximum agreement subtree problem

    CERN Document Server

    Martin, Daniel M

    2012-01-01

    Given two binary phylogenetic trees on $n$ leaves, we show that they have a common subtree on at least $O((\\log{n})^{1/2-\\epsilon})$ leaves, thus improving on the previously known bound of $O(\\log\\log n)$. To achieve this bound, we combine different special cases: when one of the trees is balanced or when one of the trees is a caterpillar, we show a lower bound of $O(\\log n)$. Another ingredient is the proof that every binary tree contains a large balanced subtree or a large caterpillar, a result that is intersting on its own. Finally, we also show that, there is an $\\alpha > 0$ such that when both the trees are balanced, they have a common subtree on at least $O(n^\\alpha)$ leaves.

  19. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    DeTar, Carleton [P.I.

    2012-12-10

    This document constitutes the Final Report for award DE-FC02-06ER41446 as required by the Office of Science. It summarizes accomplishments and provides copies of scientific publications with significant contribution from this award.

  20. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gurney, Kevin R

    2015-01-12

    This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

  1. 49 CFR 23.75 - Can recipients enter into long-term, exclusive agreements with concessionaires?

    Science.gov (United States)

    2010-10-01

    ... PARTICIPATION OF DISADVANTAGED BUSINESS ENTERPRISE IN AIRPORT CONCESSIONS Other Provisions § 23.75 Can... long-term, exclusive agreement. (2) A copy of the draft and final leasing and subleasing or...

  2. Prometheus Project final report

    Science.gov (United States)

    Taylor, Randall

    2005-01-01

    This Final Report serves as an executive summary of the Prometheus Project's activities and deliverables from November 2002 through September 2005. It focuses on the challenges from a technical and management perspective, what was different and innovative about this project, and identifies the major options, decisions, and accomplishments of the Project team as a whole. However, the details of the activities performed by DOE NR and its contractors will be documented separately in accordance with closeout requirements of the DOE NR and consistent with agreements between NASA and NR.

  3. Effects of type of agreement violation and utterance position on the auditory processing of subject-verb agreement: An ERP study

    Directory of Open Access Journals (Sweden)

    Sithembinkosi Dube

    2016-08-01

    Full Text Available Previous ERP studies have often reported two ERP components—LAN and P600—in response to subject-verb (S-V agreement violations (e.g., the boys *runs. However, the latency, amplitude and scalp distribution of these components have been shown to vary depending on various experiment-related factors. One factor that has not received attention is the extent to which the relative perceptual salience related to either the utterance position (verbal inflection in utterance-medial vs. utterance-final contexts or the type of agreement violation (errors of omission vs. errors of commission may influence the auditory processing of S-V agreement. The lack of reports on these effects in ERP studies may be due to the fact that most studies have used the visual modality, which does not reveal acoustic information. To address this gap, we used ERPs to measure the brain activity of Australian English-speaking adults while they listened to sentences in which the S-V agreement differed by type of agreement violation and utterance position. We observed early negative and positive clusters (AN/P600 effects for the overall grammaticality effect. Further analysis revealed that the mean amplitude and distribution of the P600 effect was only significant in contexts where the S-V agreement violation occurred utterance-finally, regardless of the type of agreement violation. The mean amplitude and distribution of the negativity did not differ significantly across types of agreement violation and utterance position. These findings suggest that the increased perceptual salience of the violation in utterance-final position (due to phrase-final lengthening influenced how S-V agreement violations were processed during sentence comprehension. Implications for the functional interpretation of language-related ERPs and experimental design are discussed.

  4. 22 CFR 124.6 - Termination of manufacturing license agreements and technical assistance agreements.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Termination of manufacturing license agreements... Termination of manufacturing license agreements and technical assistance agreements. The U.S. party to a manufacturing license or a technical assistance agreement must inform the Directorate of Defense Trade...

  5. Analyzing rater agreement manifest variable methods

    CERN Document Server

    von Eye, Alexander

    2014-01-01

    Agreement among raters is of great importance in many domains. For example, in medicine, diagnoses are often provided by more than one doctor to make sure the proposed treatment is optimal. In criminal trials, sentencing depends, among other things, on the complete agreement among the jurors. In observational studies, researchers increase reliability by examining discrepant ratings. This book is intended to help researchers statistically examine rater agreement by reviewing four different approaches to the technique.The first approach introduces readers to calculating coefficients that allow one to summarize agreements in a single score. The second approach involves estimating log-linear models that allow one to test specific hypotheses about the structure of a cross-classification of two or more raters'' judgments. The third approach explores cross-classifications or raters'' agreement for indicators of agreement or disagreement, and for indicators of such characteristics as trends. The fourth approach compa...

  6. AN IMPROVED AUTHENTICATED KEY AGREEMENT PROTOCOL

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In 1999, Seo and Sweeney proposed a simple authenticated key agreement protocol that was designed to act as a Diffie-Hellman key agreement protocol with user authentication.Various attacks on this protocol are described and enhanced in the literature. Recently, Ku and Wang proposed an improved authenticated key agreement protocol, where they asserted the protocol could withstand the existing attacks. This paper shows that Ku and Wang's protocol is still vulnerable to the modification attack and presents an improved authenticated key agreement protocol to enhance the security of Ku and Wang's protocol. The protocol has more efficient performance by replacing exponentiation operations with message authentication code operations.

  7. 76 FR 64944 - Notice of Agreements Filed

    Science.gov (United States)

    2011-10-19

    ...: Hamburg-Sud (``HSDG''); Alianca Navegacao e Logistica Ltda. e CIA (``Alianca''); Compania Sud Americana de...-010. Title: Maritime Credit Agreement. Parties: Alianca Navegacao e Logistica Ltda. & Cia.;...

  8. Final Report

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Nielsen, Peter V.

    This final report for the Hybrid Ventilation Centre at Aalborg University describes the activities and research achievement in the project period from August 2001 to August 2006. The report summarises the work performed and the results achieved with reference to articles and reports published...

  9. Energy Agreement for Sustainable Growth; Energieakkoord voor duurzame groei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-09-01

    The SER (Social and Economic Council of the Netherlands) Energy Agreement for Sustainable Growth outlines the ambition to provide a long-term perspective for the Dutch energy economy with short and medium term agreements. Therefore, a large number of concrete measures and elaborations are agreed upon. Quantitative assessments are made of the effects for 2020-2023. Because there are almost no concrete measures for a longer period and the uncertainties are increasing for the longer term, calculations were not carried out for years after 2023. The extent to which the agreed steps contribute to the necessary building blocks for the energy transition in the long term is assessed qualitatively. Agreed targets in the agreement are: (1) A reduction in final energy consumption by an average of 1.5% per year; (2) 100 PJ energy conservation in final energy consumption in 2020; (3) 14% renewable energy by 2020 and 16% in 2023; (4) at least 15,000 jobs with an emphasis on the next few years [Dutch] Het SER-Energieakkoord voor duurzame groei schetst als ambitie het bieden van een langetermijnperspectief voor onze energiehuishouding met afspraken voor de korte en middellange termijn. Het is daartoe een groot aantal concrete maatregelen en nadere uitwerkingen overeengekomen. ECN/PBL hebben met het EIB een kwantitatieve doorrekening gemaakt van de effecten voor 2020/23. Omdat er vrijwel geen concrete maatregelen zijn afgesproken die gericht zijn op een verder liggende periode en de onzekerheden op langere termijn steeds meer toenemen, is geen doorrekening voor latere jaren gemaakt. De mate waarin de afgesproken stappen bijdragen aan de nodige bouwstenen voor de energietransitie op langere termijn is kwalitatief beoordeeld. Afgesproken doelen in het akkoord zijn: (1) Een besparing van het finale energieverbruik met gemiddeld 1,5% per jaar; (2) 100 PJ besparing in het finale energieverbruik in 2020; (3) 14% hernieuwbare energie in 2020 en 16% in 2023; (4) Tenminste 15.000 banen met

  10. 23 CFR 635.115 - Agreement estimate.

    Science.gov (United States)

    2010-04-01

    ... submitted by the STD for each force account project (see 23 CFR part 635, subpart B) when the plans and... 23 Highways 1 2010-04-01 2010-04-01 false Agreement estimate. 635.115 Section 635.115 Highways... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.115 Agreement estimate. (a) Following the award...

  11. LEASING CONTRACT IN THE LEASING AGREEMENT

    Directory of Open Access Journals (Sweden)

    Prudnikova A. E.

    2014-12-01

    Full Text Available The presented publication is devoted to the analysis of legal nature of the contract of financial rent (leasing. The article presents the existing approaches to the concept of a leasing agreement, also attempted to determine the place of contract in the lease agreement

  12. Agreement Theorems in Dynamic-Epistemic Logic

    NARCIS (Netherlands)

    Degremont, Cedric; Roy, Oliver

    2012-01-01

    This paper introduces Agreement Theorems to dynamic-epistemic logic. We show first that common belief of posteriors is sufficient for agreement in epistemic-plausibility models, under common and well-founded priors. We do not restrict ourselves to the finite case, showing that in countable structure

  13. 77 FR 33459 - Notice of Agreements Filed

    Science.gov (United States)

    2012-06-06

    ...: The amendment would add Morocco to the geographic scope of the agreement, adjust the amount of space....S. East Coast Slot Charter Agreement. Parties: Hyundai Merchant Marine Co., Ltd., Mistsui O.S.K... and Gulf Coasts to ports in countries bordering the Red Sea and Arabian Gulf. By Order of the...

  14. 12 CFR 1291.9 - Agreements.

    Science.gov (United States)

    2010-01-01

    ... with each member receiving an AHP subsidized advance or AHP direct subsidy an agreement or agreements... Bank policies relevant to the member's approved application for AHP subsidy. (2) AHP subsidy pass-through. The member shall pass on the full amount of the AHP subsidy to the project or household,...

  15. Agreement Attraction in Comprehension: Representations and Processes

    Science.gov (United States)

    Wagers, Matthew W.; Lau, Ellen F.; Phillips, Colin

    2009-01-01

    Much work has demonstrated so-called attraction errors in the production of subject-verb agreement (e.g., "The key to the cabinets are on the table", [Bock, J. K., & Miller, C. A. (1991). "Broken agreement." "Cognitive Psychology, 23", 45-93]), in which a verb erroneously agrees with an intervening noun. Six self-paced reading experiments examined…

  16. 76 FR 11473 - Notice of Agreements Filed

    Science.gov (United States)

    2011-03-02

    ...; American President Lines, Ltd.; Maersk Line Limited; and Zim Integrated Shipping Services, Ltd. Filing... American President Lines Ltd. and APL Co Pte. Ltd. Agreement No.: 012036-002. Title: Maersk Line/MSC TP5... revise the amount of space to be chartered. Agreement No.: 012119. Title: Maersk Line/CMA CGM TP5...

  17. 78 FR 78956 - Notice of Agreements Filed

    Science.gov (United States)

    2013-12-27

    ... . Agreement No.: 012032-009. Title: CMA CGM/MSC/Maersk Line North and Central China-US Pacific Coast Three... overall slots allocations. The amendment also adds new language authorizing Maersk Line to charter space to CMA CGM on its TP6 service. Agreement No.: 012238. Title: HLAG/Maersk Line Gulf-Central...

  18. 75 FR 67749 - Notice of Agreements Filed

    Science.gov (United States)

    2010-11-03

    ...: APL/Maersk Line Reciprocal Space Charter Agreement. Parties: American President Lines, Ltd.; APL Co....: 011435-014. Title: APL/HLAG Space Charter Agreement. Parties: American President Lines, Ltd.; APL Co. Pte.... Moller-Maersk A/S; CMA CGM S.A.; Hamburg-S d; and Hapag-Lloyd AG. Filing Party: Wayne R. Rohde,...

  19. 78 FR 66713 - Notice of Agreements Filed

    Science.gov (United States)

    2013-11-06

    ....; American President Lines, Ltd.; A.P. Moller-Maersk A/S; CMA CGM, S.A.; Atlantic Container Line; China... Caribbean Services LLC; Hybur Ltd.; King Ocean Services Limited; Seaboard Marine, Ltd.; Seafreight Line, Ltd... would add US Lines Limited as a party to the agreement. Agreement No.: 011284-072. Title: Ocean...

  20. 78 FR 40739 - Notice of Agreements Filed

    Science.gov (United States)

    2013-07-08

    ... . Agreement No.: 012084-002. Title: HLAG/Maersk Line Gulf-South America Slot Charter Agreement. Parties: A.P. Moller-Maersk A/S and Hapag-Lloyd AG. Filing Party: Robert K. Magovern, Esq.; Cozen O'Connor; 1627 I... service string from which Maersk could charter space from Hapag-Lloyd. The parties have...

  1. 78 FR 64940 - Notice of Agreements Filed

    Science.gov (United States)

    2013-10-30

    .... Agreement No.: 012230. Title: P3 Network Vessel Sharing Agreement. Parties: A.P. Moller-Maersk A/S trading under the name Maersk Line; CMA CGM S.A.; and MSC Mediterranean Shipping Company, S.A. Filing Party... Yusen Kaisha and Eukor Car Carrier Inc. ] Filing Party: Robert Shababb, Corporate Counsel, NYK...

  2. 77 FR 18815 - Notice of Agreements Filed

    Science.gov (United States)

    2012-03-28

    ... . Agreement No.: 012037-003. Title: Maersk Line/CMA CGM TA3 Space Charter Agreement. Parties: A.P. Moeller-Maersk A/S and CMA CGM S.A. Filing Party: Wayne R. Rohde, Esq.; Cozen O'Connor; 1627 I Street NW.,...

  3. 77 FR 42310 - Notice of Agreements Filed

    Science.gov (United States)

    2012-07-18

    ... . Agreement No.: 012119-001. Title: Maersk Line/CMA CGM TP5 Space Charter Agreement. Parties: A.P. Moller-Maersk A/S and CMA CGM S.A. Filing Parties: Wayne Rohde, Esq.; Cozen O'Connor; 1627 I Street NW.; Suite... language reflecting the fact that Maersk's TP5 service will be operated in cooperation with another...

  4. 77 FR 59193 - Notice of Agreement Filed

    Science.gov (United States)

    2012-09-26

    ... . Agreement No.: 012159-001. Title: Maersk Line/New World Alliance Slot Exchange Agreement. Parties: A.P. Moller-Maersk A/S trading under the name of Maersk Line; American President Lines, Ltd.; APL Co. Pte, Ltd.; Hyundai Merchant Marine Co., Ltd.; and Mitsui O.S.K. Lines, Ltd. (``MOL''). Filing Party: David F....

  5. 75 FR 69079 - Notice of Agreements Filed

    Science.gov (United States)

    2010-11-10

    ....gov . Agreement No.: 011261-009. Title: ACL/Wallenius Wilhelmsen Lines Agreement. Parties: Atlantic Container Line AB and Wallenius Wilhelmsen Logistics AS (``WWL''). Filing Party: Wayne R. Rohde, Esq.; Cozen...: A.P. Moller-Maersk A/S; CMA CGM S.A.; Compania Chilena de Navegacion Interoceanica S.A.;...

  6. 75 FR 74732 - Notice of Agreements Filed

    Science.gov (United States)

    2010-12-01

    ... APL's corporate address. Agreement No.: 012086-001. Title: Maersk Line/Horizon Lines Space Charter Agreement. Parties: A.P. Moller-Maersk A/S and Horizon Lines, LLC. Filing Party: Matthew Thomas, Esq.; Reed...-Maersk A/S; APL Co. Pte Ltd.; Compania Chilena de Navegacion Interoceanica, S.A.; Compania Sud...

  7. 76 FR 7209 - Notice of Agreements Filed

    Science.gov (United States)

    2011-02-09

    ... Lines, Ltd.; APL Co. PTE Ltd.; A.P. Moller-Maersk A/S; and Hapag-Lloyd USA, LLC. Filing Party: Wayne... Line, Ltd. as a party to the agreement. Agreement No.: 012061-002. Title: CMA CGM/Maersk Line Space....: 010982-048. Title: Florida-Bahamas Shipowners and Operators Association. Parties: Bernuth Lines,...

  8. 76 FR 41794 - Notice of Agreements Filed

    Science.gov (United States)

    2011-07-15

    ..., S.A.; Frontier Liner Services, Inc.; Hamburg-S d; Interocean Lines, Inc.; King Ocean Services..., Ltd. (dba Ecuadorian Line); and Trinity Shipping Line. Filing Party: Wayne R. Rohde, Esq.; Cozen O.... Moller-Maersk A/S as a party to the agreement. Agreement No.: 011814-005. Title: HSDG/King Ocean...

  9. 77 FR 13604 - Notice of Agreements Filed

    Science.gov (United States)

    2012-03-07

    ... Coast. Agreement No.: 012159. Title: Maersk Line/New World Alliance Slot Exchange Agreement. Parties: A.P. Moller-Maersk A/S trading under the name of Maersk Line; American President Lines, Ltd.; APL Co....; Hyundai Merchant Marine Co., Ltd.; Industrial Maritime Carriers, L.L.C.; Nordana Line A/ S; and...

  10. 75 FR 78245 - Notice of Agreements Filed

    Science.gov (United States)

    2010-12-15

    ... Services, Inc.; Farrell Lines, Inc.; Hapag-Lloyd USA, LLC; Maersk Line, Inc.; Maersk Line, Limited; and...: Evergreen Line Joint Service Agreement and A.P. Moller- Maersk A/S. Filing Party: Paul M. Keane, Esq...: The agreement authorizes Maersk to charter space from Evergreen Line in the trade from ports in...

  11. 77 FR 20398 - Notice of Agreements Filed

    Science.gov (United States)

    2012-04-04

    ... . Agreement No.: 012057-007. Title: CMA CGM/Maersk Line Space Charter, Sailing and Cooperative Working Agreement Asia to USEC and PNW-Suez/PNW & Panama Loops. Parties: A.P. Moller-Maersk A/S and CMA CGM...

  12. 78 FR 25443 - Notice of Agreements Filed

    Science.gov (United States)

    2013-05-01

    .... Agreement No.: 012172-001. Title: Maersk Line/MSC Caribbean Space Charter Agreement. Parties: A.P. Moller-Maersk A/S trading under the name Maersk Line and Mediterranean Shipping Company S.A. Filing Party: Wayne..., Ltd.; Seafreight Line, Ltd.; Tropical Shipping and Construction Company Limited; and Zim...

  13. 76 FR 19096 - Notice of Agreements Filed

    Science.gov (United States)

    2011-04-06

    ....gov . Agreement No.: 011928-006. Title: Maersk Line/HLAG Slot Charter Agreement. Parties: A.P. Moller-Maersk A/S and Hapag-Lloyd AG. Filing Party: Wayne Rohde, Esq.; Cozen O'Connor; 1627 I Street, NW.; Suite...-Lloyd Aktiengesellschaft; Nippon Yusen ] Kaisha; Orient Overseas Container Line Limited; and...

  14. Distributivity and Agreement mismatches in Serbian

    NARCIS (Netherlands)

    Bosnic, Ana

    2016-01-01

    This paper presents a truth value judgment study done on two types of numerals in the Serbian numerical system and corresponding verbal agreement mismatch that is characteristic for the numerals in question. Recent work on agreement and distributivity suggests that singular verbal marking promotes d

  15. Approximation algorithms for nonbinary agreement forests

    NARCIS (Netherlands)

    Iersel, L.J.J. van; Kelk, S.M.; Lekic, N.; Stougie, L.

    2012-01-01

    Given two rooted phylogenetic trees on the same set of taxa X, the Maximum Agreement Forest problem (MAF) asks to find a forest that is, in a certain sense, common to both trees and has a minimum number of components. The Maximum Acyclic Agreement Forest problem (MAAF) has the additional restriction

  16. 48 CFR 1542.1203 - Processing agreements.

    Science.gov (United States)

    2010-10-01

    ... MANAGEMENT CONTRACT ADMINISTRATION Novation and Change of Name Agreements 1542.1203 Processing agreements. (a... required documentary evidence. (2) Verify the accuracy of the list of contracts through the Contract... to the Director, Policy, Training and Oversight Division, and to each affected contract office....

  17. Your EHR license agreement: critical issues.

    Science.gov (United States)

    Shay, Daniel F

    2014-01-01

    This article discusses several key provisions and concepts in software license agreements for electronic health records. It offers insight into what physician practices can expect to find in their license agreements, as well as practical advice on beneficial provisions. The article examines contractual language relating to term and termination, technical specifications and support, and compliance with governmental programs.

  18. 7 CFR 1424.5 - Agreement process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Agreement process. 1424.5 Section 1424.5 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS BIOENERGY PROGRAM § 1424.5 Agreement process. (a)...

  19. Cooperative monitoring of regional security agreements

    Energy Technology Data Exchange (ETDEWEB)

    Pregenzer, A.L.; Vannoni, M.; Biringer, K.L. [Sandia National Labs., Albuquerque, NM (United States). Nonproliferation and Arms Control Analysis Dept.

    1996-11-01

    This paper argues that cooperative monitoring plays a critical role in the implementation of regional security agreements and confidence building measures. A framework for developing cooperative monitoring options is proposed and several possibilities for relating bilateral and regional monitoring systems to international monitoring systems are discussed. Three bilateral or regional agreements are analyzed briefly to illustrate different possibilities. These examples illustrate that the relationship of regional or bilateral arms control or security agreements to international agreements depends on a number of factors: the overlap of provisions between regional and international agreements; the degree of interest in a regional agreement among the international community; efficiency in implementing the agreement; and numerous political considerations. Given the importance of regional security to the international community, regions should be encouraged to develop their own infrastructure for implementing regional arms control and other security agreements. A regional infrastructure need not preclude participation in an international regime. On the contrary, establishing regional institutions for arms control and nonproliferation could result in more proactive participation of regional parties in developing solutions for regional and international problems, thereby strengthening existing and future international regimes. Possible first steps for strengthening regional infrastructures are identified and potential technical requirements are discussed.

  20. 12 CFR 619.9240 - Participation agreement.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Participation agreement. 619.9240 Section 619.9240 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9240 Participation agreement. A contract under which a lender agrees to sell a portion of a loan to one or...

  1. Cooperation Agreement Signed Between CPAFFC and HSF

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正>An agreement on cooperation between theCPAFFC and the Hanns Seidel Foundation was signed in Beijing on October 24, 2003. The agreement sets forth the framework of cooperation between the two sides and concrete forms and programmes of cooperation. The two sides will regularly carry out exchanges between parlia-

  2. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-07

    This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.

  3. Conference Diplomacy: The Making of the Paris Agreement

    Directory of Open Access Journals (Sweden)

    Aslak Brun

    2016-09-01

    Full Text Available The article offers an insider’s account of how the Paris Agreement on climate change was reached. Focusing on participation and ambition, it describes the efforts to include a long-term temperature goal, expectations for regular ratcheting up of climate efforts, and provisions for tracking global progress. The author argues that a shift from the earlier top-down approaches to setting targets, to a bottom-up, self-determined approach has spurred participation and made it easier to reach agreement. In addition, the Paris Agreement anchors a clearer direction of travel than before. The article also discusses the negotiations of the provisions in the Agreement to drive increased national climate mitigation efforts over time. Finally, the author considers the role of conference diplomacy, particularly the need for inclusive leadership. It is argued that the French Presidency combined a transparent negotiations process with a clear sense of direction that helped achieve a comprehensive and ambitious outcome. The role of back-channel talks as part of effective conference diplomacy is also discussed.

  4. [Innovative medicines and market access agreements].

    Science.gov (United States)

    Toumi, M; Zard, J; Duvillard, R; Jommi, C

    2013-09-01

    Market Access Agreements (MAA) for drugs have emerged in response to the need to control health expenditures, as well as to the uncertainty about the true benefit of a drug. It is possible to group MAA in two types of agreements: financial agreements and outcome-based agreements. MAA is a growing trend and is shifting towards conditional access. However, the willingness to use these contracts and their implementation differ across countries, and some are still resistant to put them in place. The MAA challenges to overcome encompass the complexity of the schemes, the administrative burden and the difficulty of evaluating MAA. It is likely that these agreements might experience further evolution in the future to become a faster pathway for therapeutic innovations, at a fair price.

  5. Determination of Agreement Between Laboratory Instruments.

    Science.gov (United States)

    Gray, Tonya E.; Pratt, Manley C.; Cusick, Patrick K.

    1999-03-01

    The present study was conducted to illustrate the utility of Bland-Altman plots for use by our laboratory staff and other non-statisticians in assessing the agreement between values measured by using two different laboratory instruments. A high degree of agreement reflects acceptable interchangeability of equipment and minimal effect on clinical decision-making. We have summarized literature that suggests that the regression line and correlation coefficient used with regression analysis, although commonly employed, are not appropriate first choices for evaluating agreement. Using the ABL 500 Radiometer and i-STAT Portable Chemistry Analyzer, we evaluated pH, PCO2, and TCO2. Bland-Altman plots were simple to produce, were not mathematics-intensive, and provided an easily interpreted, graphical answer to the question of agreement between instruments. For purposes of clinical decision-making, the ABL and i-STAT machines were found to be in good agreement for the tests evaluated.

  6. Bayesian methods for measures of agreement

    CERN Document Server

    Broemeling, Lyle D

    2009-01-01

    Using WinBUGS to implement Bayesian inferences of estimation and testing hypotheses, Bayesian Methods for Measures of Agreement presents useful methods for the design and analysis of agreement studies. It focuses on agreement among the various players in the diagnostic process.The author employs a Bayesian approach to provide statistical inferences based on various models of intra- and interrater agreement. He presents many examples that illustrate the Bayesian mode of reasoning and explains elements of a Bayesian application, including prior information, experimental information, the likelihood function, posterior distribution, and predictive distribution. The appendices provide the necessary theoretical foundation to understand Bayesian methods as well as introduce the fundamentals of programming and executing the WinBUGS software.Taking a Bayesian approach to inference, this hands-on book explores numerous measures of agreement, including the Kappa coefficient, the G coefficient, and intraclass correlation...

  7. Cooperative monitoring of regional security agreements

    Energy Technology Data Exchange (ETDEWEB)

    Pregenzer, A.L.; Vannoni, M.; Biringer, K.L.

    1995-08-01

    This paper argues that cooperative monitoring plays a critical role in the implementation of regional security agreements and confidence building measures. A framework for developing cooperative monitoring options is proposed and several possibilities for relating bilateral and regional monitoring systems to international monitoring systems are discussed. Three bilateral or regional agreements are analyzed briefly to illustrate different possibilities: (1) the demilitarization of the Sinai region between Israel and Egypt in the 1970s; (2) the 1991 quadripartite agreement for monitoring nuclear facilities among Brazil, Argentina, The Argentine-Brazilian Agency for Accounting and Control of Nuclear Materials and the International Atomic Energy Agency; and (3) a bilateral Open Skies agreement between Hungary and Romania in 1991. These examples illustrate that the relationship of regional or bilateral arms control or security agreements to international agreements depends on a number of factors: the overlap of provisions between regional and international agreements; the degree of interest in a regional agreement among the international community; efficiency in implementing the agreement; and numerous political considerations.Given the importance of regional security to the international community, regions should be encouraged to develop their own infrastructure for implementing regional arms control and other security agreements. A regional infrastructure need not preclude participation in an international regime. On the contrary, establishing regional institutions for arms control and nonproliferation could result in more proactive participation of regional parties in developing solutions for regional and international problems, thereby strengthening existing and future international regimes. Possible first steps for strengthening regional infrastructures are identified and potential technical requirements are discussed.

  8. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-02-07

    This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TIbased electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.

  9. Client/consultant model services agreement

    CERN Document Server

    International Federation of Consulting Engineers

    2006-01-01

    The terms of the Client Consultant Model Services agreement (The White Book) have been prepared by the Fédération Internationale des Ingénieurs-Conseils (FIDIC) and are recommended for general use for the purposes of pre-investment and feasibility studies, designs and administration of construction and project management, where proposals for such services are invited on an international basis. They are equally adaptable for domestic agreements. - See more at: http://fidic.org/books/clientconsultant-model-services-agreement-4th-ed-2006-white-book#sthash.3Uxy5qT3.dpuf

  10. Service level agreements for cloud computing

    CERN Document Server

    Wieder, Philipp; Theilmann, Wolfgang

    2011-01-01

    Service Level Agreements for Cloud Computing provides a unique combination of business-driven application scenarios and advanced research in the area of service-level agreements for Clouds and service-oriented infrastructures. Current state-of-the-art research findings are presented in this book, as well as business-ready solutions applicable to Cloud infrastructures or ERP (Enterprise Resource Planning) environments. Service Level Agreements for Cloud Computing contributes to the various levels of service-level management from the infrastructure over the software to the business layer, includ

  11. Radiologist agreement on the quantification of bronchiectasis by high-resolution computed tomography

    Science.gov (United States)

    de Brito, Milene Carneiro Barbosa; Ota, Maurício Kenji; Leitão Filho, Fernando Sergio Studart; Meirelles, Gustavo de Souza Portes

    2017-01-01

    Objective To evaluate radiologist agreement on the quantification of bronchiectasis by high-resolution computed tomography (HRCT). Materials and Methods The HRCT scans of 43 patients with bronchiectasis were analyzed by two radiologists, who used a scoring system to grade the findings. Kappa (κ) values and overall agreement were calculated. Results For the measurement and appearance of bronchiectasis, the interobserver agreement was moderate (κ = 0.45 and κ = 0.43, respectively), as was the intraobserver agreement (κ = 0.54 and κ = 0.47, respectively). Agreement on the presence of mucous plugging was fair, for central distribution (overall interobserver agreement of 68.3% and κ = 0.39 for intraobserver agreement) and for peripheral distribution (κ = 0.34 and κ = 0.35 for interobserver and intraobserver agreement, respectively). The agreement was also fair for peribronchial thickening (κ = 0.21 and κ = 0.30 for interobserver and intraobserver agreement, respectively). There was fair interobserver and intraobserver agreement on the detection of opacities (κ = 0.39 and 71.9%, respectively), ground-glass attenuation (64.3% and κ = 0.24, respectively), and cysts/bullae (κ = 0.47 and κ = 0.44, respectively). Qualitative analysis of the HRCT findings of bronchiectasis and the resulting individual patient scores showed that there was an excellent correlation between the observers (intraclass correlation coefficient of 0.85 and 0.81 for interobserver and intraobserver agreement, respectively). Conclusion In the interpretation of HRCT findings of bronchiectasis, radiologist agreement appears to be fair. In our final analysis of the findings using the proposed score, we observed excellent interobserver and intraobserver agreement. PMID:28298729

  12. 48 CFR 25.403 - World Trade Organization Government Procurement Agreement and Free Trade Agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false World Trade Organization Government Procurement Agreement and Free Trade Agreements. 25.403 Section 25.403 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Trade Agreements 25.403 World Trade...

  13. EMI-EDGI Operational Level Agreement

    CERN Document Server

    Di Meglio, Alberto

    2012-01-01

    This document is the Operational Level Agreement signed by EMI and EDGI for the contribution of middleware from EDGI into the EMI distribution and the definition of service levels compatible with the existing EMI SLAs

  14. 78 FR 70300 - Notice of Agreements Filed

    Science.gov (United States)

    2013-11-25

    ....: 012230. Title: P3 Network Vessel Sharing Agreement. Parties: A.P. Moller-Maersk A/S trading under the name Maersk Line; CMA CGM S.A.; and MSC Mediterranean Shipping Company, S.A. Filing Party: Wayne...

  15. 76 FR 36537 - Notice of Agreement Filed

    Science.gov (United States)

    2011-06-22

    ... No.: 012130. Title: Maersk Line/HLAG Latin America Slot Exchange Agreement. Parties: A.P. Moller-Maersk A/S and Hapag-Lloyd AG. Filing Parties: Wayne Rohde, esq.; Cozen O'Connor; 1627 I Street,...

  16. A Time for Flexible Donor Agreements.

    Science.gov (United States)

    Fischer, Gerald B.

    2003-01-01

    Discusses why volatile markets and new donor expectations make now a good time to rework payout rates and gift agreements to bolster financial and strategic performance. Suggests seven options for action. (EV)

  17. New Danish Company Act on Shareholders' Agreements

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2011-01-01

    . The substantial elements in many agreements are clauses on (1) voting for board candidates, (2) voting for dividends of certain proportions, and (3) first refusal rights, respectively, call options for shares in the company. Such clauses are at the very roots of corporate law, dealing with the shareholders’ (1......Section 82 of the Danish Company Act, in force from 1 March 2010, provides that ‘Shareholders’ agreements are neither binding on the company nor on decisions taken by the general assembly’. This has far-reaching consequences for shareholders’ agreements, also for already existing agreements......) dispose of his shares in a different way than what is agreed upon, section 82 will show its ugly face, and contractual law and corporate law must in such cases be regarded as two different worlds. The remedies against this are partly of a contractual nature (penalty, mutual pledge in shares, injunction...

  18. ;Agreement; in the IPCC Confidence measure

    Science.gov (United States)

    Rehg, William; Staley, Kent

    2017-02-01

    The Intergovernmental Panel on Climate Change (IPCC) has, in its most recent Assessment Report (AR5), articulated guidelines for evaluating and communicating uncertainty that include a qualitative scale of confidence. We examine one factor included in that scale: the ;degree of agreement.; Some discussions of the degree of agreement in AR5 suggest that the IPCC is employing a consensus-oriented social epistemology. We consider the application of the degree of agreement factor in practice in AR5. Our findings, though based on a limited examination, suggest that agreement attributions do not so much track the overall consensus among investigators as the degree to which relevant research findings substantively converge in offering support for IPCC claims. We articulate a principle guiding confidence attributions in AR5 that centers not on consensus but on the notion of support. In concluding, we tentatively suggest a pluralist approach to the notion of support.

  19. 75 FR 42445 - Notice of Agreement Filed

    Science.gov (United States)

    2010-07-21

    ... No.: 012105. Title: SCM Lines Transportes/CCNI Agreement. Parties: Compania Chilena de Navegacion Interoceanica S.A. and SCM Lines Transportes Maritimos Sociedade Unipessoal, LDA. Filing Party: John P....

  20. Interagency Agreement for Wildland Fire Management

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objectives of this Master Cooperative Wildland Fire Management Agreement are to provide a basis for cooperation among the agencies on all aspects of wildland...

  1. 78 FR 63474 - Notice of Agreements Filed

    Science.gov (United States)

    2013-10-24

    ... charter space to Maersk Line in the trade between Guatemala and Honduras, on the one hand, and Miami, FL... China (including Hong Kong), and the Pacific Coast of the U.S. and Canada. Agreement No.: 201221....

  2. Free-trade agreements: challenges for global health.

    Science.gov (United States)

    Ribeiro, Helena

    2015-01-01

    In this study new free-trade agreements are discussed, which are based on the breaking down of tariff and technical barriers and normally exclude most of the poorest countries in the world. Considering the current context of economic globalization and its health impacts, seven controversial points of these treaties and their possible implications for global public health are presented, mainly regarding health equity and other health determinants. Finally, this research proposes a greater social and health professionals participation in the formulation and discussion of these treaties, and a deeper insertion of Brazil in this important international agenda.

  3. The North American Free Trade Agreement

    Science.gov (United States)

    1993-02-25

    that would have continued 3 Carlos Salinas de Gortari , Interview, NEW PERSPECTIVES QUARTERLY, Winter 1991, pp. 4-9. 4 Various authors presenting...vast US and Canadian consumer markets and to attract badly needed foreign capital. In this sense, the agreement is the crown jewel in President Salinas ...President Salinas recognizes the importance of the agreement as a means to consolidate gains made to date, thereby providing the "permanence

  4. 77 FR 16838 - Notice of Agreements Filed

    Science.gov (United States)

    2012-03-22

    ... deletes A.P. Moller-Maersk AS, trading under the name of Maersk Line, as party to the Agreement. Agreement...- Maersk A/S trading under the name of Maersk Line; China Shipping Container Lines Co. Ltd.; CMA CGM A.A...-4007. Synopsis: Adds A.P. Moller-Maersk A/s trading under the name Maersk Line as a party to...

  5. Agricultural Reciprocity under Economic Partnership Agreements

    OpenAIRE

    Christopher Stevens; Jane Kennan

    2006-01-01

    This paper investigates how the formation of Economic Partnership Agreements (EPAs) with the EU might affect the ability of the six Development Cooperation Ireland programme countries in Sub-Saharan Africa to continue to provide protection to their domestic agri-food sectors. Various scenarios are constructed on the assumption that ‘substantially all' trade with the EU must be liberalised if the EPAs are to be compatible with WTO rules on regional trade agreements. The paper concludes that EP...

  6. Improved Authenticated Multi-Key Agreement Protocol

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hua; YUAN Zheng; WEN Qiaoyan

    2006-01-01

    Zhou et al give an attack on Harn's modified authenticated multi-key agreement protocol, and give a protocol that can prevent the unknown key-share attack. The paper points out that the protocol is vulnerable to a concatenation attack. This paper proposes an improved authenticated multi-key agreement protocol which shows how to make Harn's protocol more secure by modifying the signature and verification. And this protocol can escape the concatenation attack.

  7. The administrative review of concession agreements

    Directory of Open Access Journals (Sweden)

    Fatmira Hajdari

    2014-01-01

    The practice of concessionary agreements in Albania is only in its early steps of development. Furthermore, the legislation that provides for the concession agreements has suffered changes to reflect the international legislation. All of which have led to the case law encountering various issues, which we have only humbly tried to reflect in this paper, while also providing our opinion with regard to addressing them.

  8. Automated tools for cross-referencing large databases. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Clapp, N E; Green, P L; Bell, D [and others

    1997-05-01

    A Cooperative Research and Development Agreement (CRADA) was funded with TRESP Associates, Inc., to develop a limited prototype software package operating on one platform (e.g., a personal computer, small workstation, or other selected device) to demonstrate the concepts of using an automated database application to improve the process of detecting fraud and abuse of the welfare system. An analysis was performed on Tennessee`s welfare administration system. This analysis was undertaken to determine if the incidence of welfare waste, fraud, and abuse could be reduced and if the administrative process could be improved to reduce benefits overpayment errors. The analysis revealed a general inability to obtain timely data to support the verification of a welfare recipient`s economic status and eligibility for benefits. It has been concluded that the provision of more modern computer-based tools and the establishment of electronic links to other state and federal data sources could increase staff efficiency, reduce the incidence of out-of-date information provided to welfare assistance staff, and make much of the new data required available in real time. Electronic data links have been proposed to allow near-real-time access to data residing in databases located in other states and at federal agency data repositories. The ability to provide these improvements to the local office staff would require the provision of additional computers, software, and electronic data links within each of the offices and the establishment of approved methods of accessing remote databases and transferring potentially sensitive data. In addition, investigations will be required to ascertain if existing laws would allow such data transfers, and if not, what changed or new laws would be required. The benefits, in both cost and efficiency, to the state of Tennessee of having electronically-enhanced welfare system administration and control are expected to result in a rapid return of investment.

  9. ESO and NSF Sign Agreement on ALMA

    Science.gov (United States)

    2003-02-01

    Green Light for World's Most Powerful Radio Observatory On February 25, 2003, the European Southern Observatory (ESO) and the US National Science Foundation (NSF) are signing a historic agreement to construct and operate the world's largest and most powerful radio telescope, operating at millimeter and sub-millimeter wavelength. The Director General of ESO, Dr. Catherine Cesarsky, and the Director of the NSF, Dr. Rita Colwell, act for their respective organizations. Known as the Atacama Large Millimeter Array (ALMA), the future facility will encompass sixty-four interconnected 12-meter antennae at a unique, high-altitude site at Chajnantor in the Atacama region of northern Chile. ALMA is a joint project between Europe and North America. In Europe, ESO is leading on behalf of its ten member countries and Spain. In North America, the NSF also acts for the National Research Council of Canada and executes the project through the National Radio Astronomy Observatory (NRAO) operated by Associated Universities, Inc. (AUI). The conclusion of the ESO-NSF Agreement now gives the final green light for the ALMA project. The total cost of approximately 650 million Euro (or US Dollars) is shared equally between the two partners. Dr. Cesarsky is excited: "This agreement signifies the start of a great project of contemporary astronomy and astrophysics. Representing Europe, and in collaboration with many laboratories and institutes on this continent, we together look forward towards wonderful research projects. With ALMA we may learn how the earliest galaxies in the Universe really looked like, to mention but one of the many eagerly awaited opportunities with this marvellous facility". "With this agreement, we usher in a new age of research in astronomy" says Dr. Colwell. "By working together in this truly global partnership, the international astronomy community will be able to ensure the research capabilities needed to meet the long-term demands of our scientific enterprise, and

  10. Challenges on preparing unitization agreements in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Marilda Rosado de Sa [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Faculdade de Direito; Appi, Valeria Tiriba [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    As a further stage of the new oil and gas industry in Brazil, various challenges are now faced as an outcome from the O and G projects progress, under the legal framework in force in Brazil. Among all are the first unitization processes, which require a set of steps to be performed in order to achieve a unitization agreement. The paper aims at analyzing the legal, technical and drafting issues to be dealt with in such agreements. After a brief introduction to the general issues at stake in the unitization agreements the study shall encompass a follow up of the sequence of events to be complied with. One could mention the settlement of the criteria onto calculations to serve as guidelines for the negotiations will be based on. That, is usually based on concepts as oil in place, possible O and G in the reservoir, or reserve, which must be agreed by all involved parties. Another possible step to be considered is the creation of a common database, in order to permit fast decisions and optimise E and P operations in the unitized area. Other concerns should be addressed, depending on the amount of O and G to be produced from the unitized area, as: the avoidance of multiple redeterminations aiming to decrease unnecessary expenditures, which could jeopardize the arising project profitability; and the recalculations of Government take, royalties and other incumbencies, to be shared by all involved parties. The paper shall also mention the experience of other countries trying to adopt, where applicable and compatible with the best practices of the oil industry, solutions adopted where tradition in oil and gas is more mature. It should be considered that, in each bidding round the Brazilian Concession Agreement has undergone changes, therefore during an unitization process with two different versions of the Concession Agreement differences between corresponding clauses will have to be faced. Comments should also be made about satellite agreements, encompassing O and G buying

  11. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Robert C. [Texas A& M University; Kamon, Teruki [Texas A& M University; Toback, David [Texas A& M University; Safonov, Alexei [Texas A& M University; Dutta, Bhaskar [Texas A& M University; Dimitri, Nanopoulos [Texas A& M University; Pope, Christopher [Texas A& M University; White, James [Texas A& M University

    2013-11-18

    Overview The High Energy Physics Group at Texas A&M University is submitting this final report for our grant number DE-FG02-95ER40917. This grant has supported our wide range of research activities for over a decade. The reports contained here summarize the latest work done by our research team. Task A (Collider Physics Program): CMS & CDF Profs. T. Kamon, A. Safonov, and D. Toback co-lead the Texas A&M (TAMU) collider program focusing on CDF and CMS experiments. Task D: Particle Physics Theory Our particle physics theory task is the combined effort of Profs. B. Dutta, D. Nanopoulos, and C. Pope. Task E (Underground Physics): LUX & NEXT Profs. R. Webb and J. White(deceased) lead the Xenon-based underground research program consisting of two main thrusts: the first, participation in the LUX two-phase xenon dark matter search experiment and the second, detector R&D primarily aimed at developing future detectors for underground physics (e.g. NEXT and LZ).

  12. A Tentative Study of Agreement among University Freshmen in Oral English Group Discussions

    Institute of Scientific and Technical Information of China (English)

    杨非

    2008-01-01

    The aim of this research was to find out how university freshmen came to an agreement in oral English. There were twenty groups in two classes of freshmen who took part in this activity and got involved in the classroom discussions and after-class communications. The classes were divided into groups of six members. The results of the research showed that while the freshmen got involved in the group discussions, they used social communicative skills to reach a final agreement.

  13. A Tentative Study of Agreement among University Freshmen in Oral English Group Discussions

    Institute of Scientific and Technical Information of China (English)

    杨非

    2008-01-01

    The aim of this research was to find out how university freshmen came to an agreement in oral English. There weretwenty groups in two classes of freshmen who took part in this activity and got involved in the classroom discussions and after-classcommunications. The classes were divided into groups of six members. The results of the research showed that while the freshmen gotinvolved in the group discussions, they used social communicative skills to reach a final agreement.

  14. THE APPROVAL OF THE SETTELMENT AGREEMENT BY ARBITRATION COURT, TAKING INTO ACCOUNT THE CONCLUDED MEDIATED AGREEMENT

    Directory of Open Access Journals (Sweden)

    Maslennikova L. V.

    2014-03-01

    Full Text Available The author analyses the issue of the relationship between mediated agreements and settlement and their legal inter-relationship, as well as critical comments regarding the lack of imperative requirements in Federal law of the Russian Federation of 27.07.2010 N 193-F3 "On alternative procedure for settling disputes with the use of an intermediary (mediation procedure" to the contents of the mediated settlement agreements which are subsequently endorsed by the arbitral court as settlement agreements

  15. The Post-Agreement Negotiation Process: The Problems of Ratifying International Environmental Agreements

    OpenAIRE

    Spector, B.I.; Korula, A.

    1992-01-01

    National ratification of international environmental agreements is a prime example of post-agreement negotiations. It is often the first subprocess in a larger process of sustained negotiations that occur after international accords are concluded, focused on implementation of those accords. Certainly, implementation of negotiated agreements involves legal, political, verification, and enforcement activities at both domestic and international levels. Many of these activities, including ratific...

  16. Free Trade Agreements Are Cause for Hope

    Institute of Scientific and Technical Information of China (English)

    Financial Times

    2011-01-01

    @@ On October 21, three bilateral trade agreements have passed the US House of Representatives and Senate.But the votes came with a sense of relief rather than celebration from their supporters, and resignation rather than anger from their opponents. Very occasionally, common sense soars above political partisanship and economic short-termism to inspire hopeeven in the most jaded investor.The passing by US Congress of free trade agreements between America and Colombia, Panama and South Korea would be cause for celebration at the best of times.

  17. Authenticated Key Agreement in Group Settings

    Institute of Scientific and Technical Information of China (English)

    LI Ming; WANG Yong; GU Da-wu; BAI Ying-cai

    2006-01-01

    An enhanced definition of implicit key authentication and a secure group key agreement scheme from pairings are presented. This scheme combines the merits of group public key and key trees to achieve a communication-efficient and authenticated group key agreement protocol. Besides, it avoids dependence on signature or MAC by involving member's long-term keys and short-term keys in the group key. Furthermore, the idea behind this design can be employed as a general approach to extend the authenticated two-party Diffie-Hellman protocols to group settings.

  18. CNPC and CAS Sign Technological Cooperation Agreement

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ On August 16, 2006, China National Petroleum Corporation (CNPC) signed technological cooperation agreement with Chinese Academy of Sciences (CAS) at the Diaoyutai State Guesthouse in Beijing. Vice President of CNPC Zhou Jiping and Vice President of CAS Li Jiayang signed the agreement on behalf of both sides,marking a new era of unite brainstorm in petroleum technology. It will boost the development of petrochemical technology, especially the technology for the exploration and development of oil and gas field, engineering, oil refining and chemicals.

  19. 78 FR 28596 - Notice of Agreement Filed

    Science.gov (United States)

    2013-05-15

    ....: 012207. Title: CMA CGM/APL Slot Exchange Agreement, North Europe & Westmed--U.S. Gulf and East Coast... exchange space ] with each other in the trade between the U.S. East and Gulf Coasts on the one hand, and Netherlands, Germany, Belgium, the United Kingdom, Morocco, Malta, Italy, France, Portugal, and Spain on...

  20. 77 FR 24712 - Notice of Agreements Filed

    Science.gov (United States)

    2012-04-25

    ... Singapore, Spain, Morocco and the U.S. East Coast and modifies the number of slots to be exchanged in other... connection with the carriage of cargo between Vietnam, China, Singapore, and the U.S. East Coast. Agreement..., Korea, Vietnam, Singapore, Sri Lanka, Egypt, the United Arab Emirates, Spain, Morocco, and the U.S....

  1. 77 FR 3773 - Notice of Agreement Filed

    Science.gov (United States)

    2012-01-25

    ....: 012061-003. Title: CMA CGM/Maersk Line Space Charter, Sailing and Cooperative Working Agreement Western Mediterranean-U.S. East Coast. Parties: CMA CGM, S.A. and A.P. Moller-Maersk A/S. Filing Party: Mark E....

  2. 76 FR 63618 - Notice of Agreements Filed

    Science.gov (United States)

    2011-10-13

    ...: Transpacific Stabilization Agreement. Parties: American President Lines, Ltd. and APL Co. PTE Ltd.; (operating as a single carrier); A.P. Moller-Maersk A/S trading as Maersk Line; China Shipping Container Lines (Hong Kong) Company Limited and China Shipping Container Lines Company Limited (operating as a...

  3. 77 FR 50688 - Notice of Agreement Filed

    Science.gov (United States)

    2012-08-22

    ....: 012084-001. Title: HLAG/Maersk Line Gulf-South America Slot Charter Agreement. Parties: A.P. Moller-Maersk A/S and Hapag-Lloyd AG. Filing Party: Wayne R. Rohde, Esq.; Cozen O'Connor; 1627 I Street...

  4. 75 FR 80499 - Notice of Agreement Filed

    Science.gov (United States)

    2010-12-22

    ... No.: 012108-001. Title: The World Liner Data Agreement. Parties: ANL Container Line Pty Ltd.; A.P. Moller-Maersk A/S; CMA CGM S.A.; Compania Chilena de Navegacion Interoceanica S.A.; Hamburg- Sud; Hapag-Lloyd AG; Mediterranean Shipping Company S.A.; Orient Overseas Container Line Ltd.; and United...

  5. 78 FR 35270 - Notice of Agreements Filed

    Science.gov (United States)

    2013-06-12

    ...: Transpacific Stabilization Agreement. Parties: American President Lines, Ltd. and APL Co. PTE Ltd. (operating as a single carrier); A.P. Moller-Maersk A/S trading under the name of Maersk Line; China Shipping... Services LLC; Hybur Ltd.; Seaboard Marine, Ltd.; Seafreight Line, Ltd.; Tropical Shipping and...

  6. 75 FR 51073 - Notice of Agreement Filed

    Science.gov (United States)

    2010-08-18

    ... No.: 011733-029. Title: Common Ocean Carrier Platform Agreement. Parties: A.P. Moller-Maersk A/S; American President Lines, Ltd., APL Co., PTE Ltd.; CMA CGM; Hamburg-S d; Hapag-Lloyd AG; Mediterranean... Navegacao e Logistica Ltda.; China Shipping Container Lines Company Limited; Compania Sud Americana...

  7. 77 FR 76482 - Notice of Agreement Filed

    Science.gov (United States)

    2012-12-28

    ... Stabilization Agreement. Parties: American President Lines, Ltd. and APL Co. PTE Ltd.; (operating as a single carrier); A.P. Moller-Maersk A/S trading as Maersk Line; China Shipping Container Lines (Hong Kong) Company Limited and China Shipping Container Lines Company Limited (operating as a single carrier);...

  8. 78 FR 72890 - Notice of Agreements Filed

    Science.gov (United States)

    2013-12-04

    .... & Cia.; A.P. Moller- Maersk A/S trading under the name of Maersk Line; China Shipping Container Lines Co...: HLAG/Maersk Line Gulf-South America Slot Charter Agreement. Parties: A.P. Moller-Maersk A/S and Hapag... Sud Americana de Vapores, S.A.; COSCO Container Lines Company Limited; Dole Ocean Cargo...

  9. 77 FR 69842 - Notice of Agreement Filed

    Science.gov (United States)

    2012-11-21

    ....: 012057-008. Title: CMA CGM/Maersk Line Space Charter, Sailing and Cooperative Working Agreement Asia to USEC and PNW-Suez/PNW & Panama Loops. Parties: A.P. Moller-Maersk A/S and CMA CGM S.A. Filing...

  10. 76 FR 74060 - Notice of Agreements Filed

    Science.gov (United States)

    2011-11-30

    ... Co. Pte Ltd.; American President Lines, Ltd.; A.P. Moller-Maersk A/S; ANL Singapore Pte Ltd.; China Shipping Container Lines Co., Ltd.; CMA CGM, S.A.; Companhia Libra de Navegacao; Compa a Chilena de....: 012057-006. Title: CMA CGM/Maersk Line Space Charter, Sailing and Cooperative Working Agreement Asia...

  11. 75 FR 11180 - Notice of Agreements Filed

    Science.gov (United States)

    2010-03-10

    ... allocation within defined limits. Agreement No.: 012032-004. Title: CMA CGM/MSC/Maersk Line North and Central.... Moller-Maersk A/S, CMA CGM S.A., and Mediterranean Shipping Company S.A. Filing Party: Wayne R....

  12. On the Drafting of Confidentiality Agreements

    DEFF Research Database (Denmark)

    Drewsen, Merete; Lando, Henrik; Cummins, Tim

    2006-01-01

    IACCM (International Association for Contract and Commercial Management) has initiated. The main theoretical aspect of the article concerns the application of the value maximization principle (the Coase theorem) to the drafting of confidentiality agreements. While the article is not theoretical, its...... prescriptions are open to theoretical dispute; this may especially be the case for the section on the size of damages....

  13. 75 FR 70005 - Notice of Agreement Filed

    Science.gov (United States)

    2010-11-16

    ... operations, including RFID technology; obtain and administer government grants to fund technology-related activities; meet with stakeholders to discuss deployment of RFID technologies; and to establish and manage an entity to implement and administer agreements reached regarding RFID and/or other similar...

  14. 33 CFR 385.16 - Design agreements.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Design agreements. 385.16 Section 385.16 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE PROGRAMMATIC REGULATIONS FOR THE COMPREHENSIVE EVERGLADES RESTORATION PLAN CERP...

  15. Agreement and the structure of relative clauses

    Directory of Open Access Journals (Sweden)

    Boban Arsenijević

    2016-07-01

    Full Text Available The paper proposes an account of asymmetries in agreement patterns that obtain in restrictive and non-restrictive relative clauses headed by hybrid agreement nouns 'd(jeca '‘children’, 'braća '‘brothers’, and 'gospoda '‘gentry’ in Bosnian/Croatian/Serbian (BCS. We note that relative clauses headed by hybrid nouns display different possibilities of agreement morphology on the relative pronoun 'koji/a/e '‘which’, depending, on the one hand, on whether the relative clause is restrictive or non-restrictive and on the other, on the case of the relative pronoun. We argue that the observed differences are the result of a conspiracy of the following factors: (i hybrid number-agreement nouns introduce a null plural pronoun unspecified for gender (Postal 1966; den Dikken 2001; Torrego and Laga 2015, (ii all plural case forms of the relative pronoun except for nominative and accusative show full gender syncretism (Alsina and Arsenijević 2012b, and (iii non-restrictive relative clauses involve a null definite pronoun and attach to the head noun higher than the restrictive relative clauses (Postal 1994; de Vries 2002; 2006. We maintain that the facts discussed in the paper argue against analyses which derive the differences between restrictive and non-restrictive relative clauses from their LF representations, rather than from their overt syntax.

  16. 22 CFR 33.5 - Guaranty agreements.

    Science.gov (United States)

    2010-04-01

    ... will provide for reimbursement for certain losses caused by foreign countries' seizure and detention of U.S. fishing vessels on the basis of claims to jurisdiction which are not recognized by the United..., be transferred when a vessel which is the subject of a guaranty agreement is transferred to a...

  17. 76 FR 51033 - Notice of Agreement Filed

    Science.gov (United States)

    2011-08-17

    .... Synopsis: The amendment provides authority for the corporate restructuring of Consolidated Chassis... inland carriers to participate in pool governances; and authorizes pools formed under the Agreement, upon... carriers, shippers and others and to develop terms of use and charges for such interchanged chassis....

  18. 48 CFR 31.109 - Advance agreements.

    Science.gov (United States)

    2010-10-01

    ... sampling methodologies at 31.201-6(c). However, an advance agreement is not an absolute requirement and the...) Precontract costs; (5) Independent research and development and bid and proposal costs; (6) Royalties and...) Professional services (e.g., legal, accounting, and engineering); (13) General and administrative costs...

  19. 78 FR 75345 - Notice of Agreements Filed

    Science.gov (United States)

    2013-12-11

    ...: Compania Sud Americana de Vapores S.A. and Trans Global Shipping NV. Filing Party: Walter H. Lion Esq.; Mc... Agreement. Parties: Swordfish Shipping Inc. and Trans Global Shipping NV. Filing Party: Walter H. Lion, Esq... York and New Jersey. Parties: New York Shipping Association, Inc. and the International...

  20. 48 CFR 225.403 - World Trade Organization Government Procurement Agreement and Free Trade Agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false World Trade Organization Government Procurement Agreement and Free Trade Agreements. 225.403 Section 225.403 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SOCIOECONOMIC PROGRAMS FOREIGN ACQUISITION Trade...

  1. What’s in an Agreement? A Formal Analysis and an extension of WS-Agreement

    NARCIS (Netherlands)

    Aiello, Marco; Frankova, Ganna; Malfatti, Daniela

    2005-01-01

    Non-functional properties of services and service compositions are of paramount importance for the success of web services. The negotiation of non-functional properties between web service provider and consumer can be agreed on a priori, by specifying an agreement. WS-Agreement is a recently propose

  2. 46 CFR 535.403 - Form of agreements.

    Science.gov (United States)

    2010-10-01

    ... AND MARINE TERMINAL OPERATOR AGREEMENTS SUBJECT TO THE SHIPPING ACT OF 1984 Filing of Agreements § 535.403 Form of agreements. The requirements of this section apply to all agreements except marine.... Agreements in a language other than English shall be accompanied by an English translation. (b)...

  3. Agreement dynamics on directed random graphs

    CERN Document Server

    Lipowski, Adam; Ferreira, Antonio L

    2016-01-01

    When agreement-dynamics models are placed on a directed random graph, a fraction of sites $\\exp(-z)$, where $z$ is the average degree, becomes permanently fixed or flickering. In the Voter model, which has no surface tension, such zealots or flickers freely spread their opinions and that makes the system disordered. For models with a surface tension, like the Ising model or the Naming Game model, their role is limited and such systems are ordered at large~$z$. However, when $z$ decreases, the density of zealots or flickers increases, and below a certain threshold ($z\\sim 1.9-2.0$) the system becomes disordered. Our results show that the agreement dynamics on directed networks is much different from their undirected analogues.

  4. Authenticating Tripartite Key Agreement Protocol with Pairings

    Institute of Scientific and Technical Information of China (English)

    Sheng-Li Liu; Fang-Guo Zhang; Ke-Fei Chen

    2004-01-01

    In this paper, an authenticated tripartite key agreement protocol is proposed, which is an ID-based one with pairings. This protocol involves only one round. The authenticity of the protocol is assured by a special signature scheme, so that messages carrying the information of two ephemeral keys can be broadcasted authentically by an entity. Consequently, one instance of the protocol results in eight session keys for three entities. In other word, one instance of the protocol generates a session key, which is eight times longer than those obtained from traditional key agreement protocols. Security attributes of the protocol are presented, and the computational overhead and bandwidth of the broadcast messages are analyzed as well.

  5. FETC/EPRI BIOMASS COFIRING COOPERATIVE AGREEMENT

    Energy Technology Data Exchange (ETDEWEB)

    D. TILLMAN; E. HUGHES

    1998-08-01

    This quarter much progress was made in promoting cofiring through the many FETC/EPRI backed projects. During January 1, 1998 to March 31st, 1998 significant contractual agreements were arranged for future testing and analyses of previous testing were conducted. Most notable was the analysis done on the testing run at the Tennessee Valley Authority�s Colbert Fossil Plant that showed no significant impacts to the plant boiler due to cofiring. Northern Indiana Public Service Company also identified Bailly #7 as the site of the next series of tests using their plants. Other work done on these projects primarily focused on continued cofiring development. This report summarizes the activities during the first quarter in 1998 of the FETC/EPRI Biomass Cofiring Cooperative Agreement. It focuses upon reporting the results of testing in order to highlight the progress at utilities.

  6. Signalling in international environmental agreements. Using pre-agreement emission level as a signalling device

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, U.

    1997-12-31

    This paper addresses the question about strategic incentives in international environmental agreements and tries to give a positive description of how the design of the agreement influences the strategic behaviour of potential participants before they enter the treaty. A common feature of the design of agreements is that the reduction obligations (RO) are made contingent on a pre-agreement or baseline emission. As it is assumed that countries posses better information about their reduction costs than does the international body in charge of deciding the RO, countries might have incentives to signal higher costs by increasing their baseline emission, and thereby reducing the costs of entering the agreement. The appropriate analytical framework is to use a signalling game approach, where the pre-agreement emission level conveys information about the privately informed country`s reduction cost. In this paper two types of agreement design are considered, one with uniform obligations, and one with differentiated obligations. This enables us to make a comparison between two different reduction regimes. The result is that the predicted outcomes vary with regard to both the environmental effectiveness and the associated expected costs for the participating countries. This means that when private information is considered, the anticipation of a given institutional framework has significant impact on the resulting distortion of the total emission level, highlighting the necessity of taking this into consideration when future designs are proposed. (au)

  7. Continuous Variable Solution for Byzantine Agreement

    CERN Document Server

    Neigovzen, R; Neigovzen, Rodion; Sanpera, Anna

    2005-01-01

    We demonstrate that the Byzantine Agreement Problem (BAP) in its weaker version with detectable broadcast, can be solved using continuous variables Gaussian states with Gaussian operations. The protocol uses genuine tripartite symmetric entanglement, but differs from protocols proposed for qutrits or qubits. Contrary to the quantum key distribution (QKD) which is possible with all Gaussian states, for the BAP entanglement is needed, but not all tripartite entangled symmetric states can be used to solve the problem.

  8. Attraction Effects in Honorific Agreement in Korean

    Science.gov (United States)

    Kwon, Nayoung; Sturt, Patrick

    2016-01-01

    Previous studies have suggested that sentence processing is mediated by content-addressable direct retrieval processes (McElree, 2000; McElree et al., 2003). However, the memory retrieval processes may differ as a function of the type of dependency. For example, while many studies have reported facilitatory intrusion effects associated with a structurally illicit antecedent during the processing of subject-verb number or person agreement and negative polarity items (Pearlmutter et al., 1999; Xiang et al., 2009; Dillon et al., 2013), studies investigating reflexives have not found consistent evidence of intrusion effects (Parker et al., 2015; Sturt and Kwon, 2015; cf. Nicol and Swinney, 1989; Sturt, 2003). Similarly, the memory retrieval processes could be also sensitive to cross-linguistic differences (cf. Lago et al., 2015). We report one self-paced reading experiment and one eye-tracking experiment that examine the processing of subject-verb honorific agreement, a dependency that is different from those that have been studied to date, in Korean, a typologically different language from those previously studied. The overall results suggest that the retrieval processes underlying the processing of subject-verb honorific agreement in Korean are susceptible to facilitatory intrusion effects from a structurally illicit but feature-matching subject, with a pattern that is similar to subject-verb agreement in English. In addition, the attraction effect was not limited to the ungrammatical sentences but was also found in grammatical sentences. The clear attraction effect in the grammatical sentences suggest that the attraction effect does not solely arise as the result of an error-driven process (cf. Wagers et al., 2009), but is likely also to result from general mechanisms of retrieval processes of activating of potential items in memory (Vasishth et al., 2008). PMID:27630594

  9. Attraction Effects in Honorific Agreement in Korean.

    Science.gov (United States)

    Kwon, Nayoung; Sturt, Patrick

    2016-01-01

    Previous studies have suggested that sentence processing is mediated by content-addressable direct retrieval processes (McElree, 2000; McElree et al., 2003). However, the memory retrieval processes may differ as a function of the type of dependency. For example, while many studies have reported facilitatory intrusion effects associated with a structurally illicit antecedent during the processing of subject-verb number or person agreement and negative polarity items (Pearlmutter et al., 1999; Xiang et al., 2009; Dillon et al., 2013), studies investigating reflexives have not found consistent evidence of intrusion effects (Parker et al., 2015; Sturt and Kwon, 2015; cf. Nicol and Swinney, 1989; Sturt, 2003). Similarly, the memory retrieval processes could be also sensitive to cross-linguistic differences (cf. Lago et al., 2015). We report one self-paced reading experiment and one eye-tracking experiment that examine the processing of subject-verb honorific agreement, a dependency that is different from those that have been studied to date, in Korean, a typologically different language from those previously studied. The overall results suggest that the retrieval processes underlying the processing of subject-verb honorific agreement in Korean are susceptible to facilitatory intrusion effects from a structurally illicit but feature-matching subject, with a pattern that is similar to subject-verb agreement in English. In addition, the attraction effect was not limited to the ungrammatical sentences but was also found in grammatical sentences. The clear attraction effect in the grammatical sentences suggest that the attraction effect does not solely arise as the result of an error-driven process (cf. Wagers et al., 2009), but is likely also to result from general mechanisms of retrieval processes of activating of potential items in memory (Vasishth et al., 2008).

  10. 78 FR 5440 - Notice of Agreements Filed

    Science.gov (United States)

    2013-01-25

    ...-Maersk A/S; China Shipping Container Lines Co., Ltd.; CMA CGM, S.A.; Compa a Chilena de Navegaci n... amendment deletes Safmarine Container Lines N.V. as a subsidiary of A.P. Moller-Maersk A/S. Agreement No...-Maersk AS, trading under the name Maersk Line; CMA CGM, S.A./ANL Singapore Pte Ltd. (acting as a...

  11. Sinopec and COSCO Sign Strategic Partnership Agreement

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Sinopec and China Ocean Shipping (Group)Company (COSCO), the country's biggest shipping company, signed a framework cooperation agreement on June 18 in Beijing, under which COSCO would provide quality crude oil transport from the current 1.94 million deadweight tons. The ambitious plan was made to chter to COSCO's establishment of a long-term strategic partnership for cooperation with Sinopec, China's leading producer and supplier of petroleum products.

  12. Service-level agreements. Trading places.

    Science.gov (United States)

    Freer, J; Gray, C

    1997-10-16

    Internal trading or service-level agreements can help trusts manage the interface between hospital consultants and support services. Previous attempts at introducing SLAs had increased the administrative burden on support departments without changing consultants' behaviour or improving budgetary control. Problems were resolved by simplifying and improving measuring and reporting systems to produce credible, user-friendly information that facilitates meaningful debate between clinical managers and support services.

  13. 76 FR 4393 - Discover Financial Services Negotiated Service Agreement

    Science.gov (United States)

    2011-01-25

    ... Discover Financial Services Negotiated Service Agreement AGENCY: Postal Regulatory Commission. ACTION... Financial Services negotiated service agreement to the market dominant product list. This notice addresses... 3020, et seq., to add a Discover Financial Services (DFS) negotiated service agreement to the...

  14. Jam-X: Wireless Agreement under Interference

    CERN Document Server

    Boano, Carlo Alberto; Zúñiga, Marco Antonio; Voigt, Thiemo

    2012-01-01

    Wireless low-power transceivers used in sensor networks such as IEEE 802.15.4 typically operate in unlicensed frequency bands that are subject to external interference from devices transmitting at much higher power. Communication protocols should therefore be designed to be robust against such interference. A critical building block of many protocols at all layers is agreement on a piece of information among a set of nodes. At the MAC layer, nodes may need to agree on a new time slot or frequency channel; at the application layer nodes may need to agree on handing over a leader role from one node to another. Message loss caused by interference may break agreement in two different ways: none of the nodes use the new information (time slot, channel, leader) and stick with the previous assignment, or - even worse - some nodes use the new information and some do not. This may lead to reduced performance or failures. In this paper we investigate the problem of agreement under interference and point out the limitat...

  15. International trade agreements: hazards to health?

    Science.gov (United States)

    Shaffer, Ellen R; Brenner, Joseph E

    2004-01-01

    Since the 1980s, neoliberal policies have prescribed reducing the role of governments, relying on market forces to organize and provide health care and other vital human services. In this context, international trade agreements increasingly serve as mechanisms to enforce the privatization, deregulation, and decentralization of health care and other services, with important implications for democracy as well as for health. Critics contend that social austerity and "free" trade agreements contribute to the rise in global poverty and economic inequality and instability, and therefore to increased preventable illness and death. Under new agreements through the World Trade Organization that cover vital human services such as health care, water, education, and energy, unaccountable, secret trade tribunals could overrule decisions by democratically elected officials on public financing for national health care systems, licensing and training standards for health professionals, patient safety and quality regulations, occupational safety and health, control of hazardous substances such as tobacco and alcohol, the environment, and affordable access to safe water and sanitation. International negotiations in 2003 in Cancun and in Miami suggested that countervailing views are developing momentum. A concerned health care community has begun to call for a moratorium on trade negotiations on health care and water, and to reinvigorate an alternative vision of universal access to vital services.

  16. Enforcing ‘Self-Enforcing’ International Environmental Agreements

    OpenAIRE

    McEvoy, David M.; John K. Stranlund

    2006-01-01

    Theoretical analyses of international environmental agreements (IEAs) have typically employed the concept of self-enforcing agreements to predict the number of parties to such an agreement. The term self-enforcing, however, is a bit misleading. The concept refers to the stability of cooperative agreements, not to enforcing these agreements once they are in place. Most analyses of IEAs simply ignore the issue of enforcing compliance by parties to the terms of an agreement. In this paper we ana...

  17. Coolside waste management demonstration OCDO grant agreement No. CDO/D-902-9. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wu, M.; Winschel, R.A. [CONSOL Inc., Library, PA (United States). Research & Development

    1997-10-01

    The objectives of this project were to evaluate the potential utilization in road construction of wastes produced from the Coolside, LIMB (limestone injection multi-stage burner) and FBC (fluidized-bed combustion) processes, and to specify criteria for landfill disposal of waste from the Coolside process. These three processes are considered to be clean coal technologies. The Coolside process involves injecting an aqueous slurry of hydrated lime into the ductwork downstream of the air preheater in a coal-fired boiler. The hydrated lime captures sulfur dioxide from the flue gas producing anhydrous calcium sulfite and calcium sulfate, which are collected along with the unused hydrated lime and fly ash. The LIMB process involves injection of lime or hydrated lime directly into the furnace to capture sulfur dioxide. The waste consists principally of anhydrous calcium sulfate, lime, and fly ash. Both processes were demonstrated successfully at the Edgewater Station of Ohio Edison in Lorrain, OH, from 1989 to 1992. Circulating fluidized-bed combustion (FBC) is a commercial technology which combines steam generation with SO{sub 2} control by burning coal in a circulating bed of limestone. The waste, chemically similar to LIMB waste, is produced by bleed-off of the bed material and by collection of the flue dust. All three processes produce a dry solid waste, which must either be used or disposed of and managed to ensure environmental compliance and economic feasibility. The project was completed in June 1996.

  18. 78 FR 56729 - Final Environmental Impact Statement, Habitat Conservation Plan, and Implementing Agreement...

    Science.gov (United States)

    2013-09-13

    ... bat (Myotis sodalis) and Virginia big-eared bat (Corynorhinus townsendii virginianus) from... 33 additional turbines and associated infrastructure in the project area; the implementation of the... associated infrastructure at the end of its operational life. If approved, the permit would be for a...

  19. Commercial Vehicle Safety Alliance (CVSA)/Department of Energy (DOE) cooperative agreement final report

    Energy Technology Data Exchange (ETDEWEB)

    Slavich, Antoinette; Daust, James E.

    1999-10-01

    This S and T product is a culmination of the activities, including research of the Commercial Vehicle Safety Alliance (CVSA) in developing and implementing inspection procedures and the out-of-service criteria for states and tribes to use when inspecting HRCQ and Transuranic shipments of radioactive materials. The report also contains the results of a pilot study to test the procedures.

  20. 77 FR 71211 - Request for Information: Establish a Public-Private Collaboration, “Drug Development Initiative...

    Science.gov (United States)

    2012-11-29

    ... research would be detailed through a Cooperative Research and Development Agreement (CRADA) under the... trials with the support of the VA Cooperative Studies Program. To identify and test new drug therapies... obligate VA to enter into a CRADA with any respondent. VA reserves the right to establish a CRADA based...

  1. 44 CFR 206.44 - FEMA-State Agreements.

    Science.gov (United States)

    2010-10-01

    ... Agreement imposes binding obligations on FEMA, States, their local governments, and private nonprofit... Households Program. (b) Terms and conditions. This Agreement describes the incident and the incident...

  2. Agreement processing and attraction errors in aging: evidence from subject-verb agreement in German.

    Science.gov (United States)

    Reifegerste, Jana; Hauer, Franziska; Felser, Claudia

    2016-11-07

    Effects of aging on lexical processing are well attested, but the picture is less clear for grammatical processing. Where age differences emerge, these are usually ascribed to working-memory (WM) decline. Previous studies on the influence of WM on agreement computation have yielded inconclusive results, and work on aging and subject-verb agreement processing is lacking. In two experiments (Experiment 1: timed grammaticality judgment, Experiment 2: self-paced reading + WM test), we investigated older (OA) and younger (YA) adults' susceptibility to agreement attraction errors. We found longer reading latencies and judgment reaction times (RTs) for OAs. Further, OAs, particularly those with low WM scores, were more accepting of sentences with attraction errors than YAs. OAs showed longer reading latencies for ungrammatical sentences, again modulated by WM, than YAs. Our results indicate that OAs have greater difficulty blocking intervening nouns from interfering with the computation of agreement dependencies. WM can modulate this effect.

  3. 29 CFR 4041.7 - Challenges to plan termination under collective bargaining agreement.

    Science.gov (United States)

    2010-07-01

    ... means a collective bargaining agreement that has not been made inoperative by a judicial ruling and, by... labor-management relations law commences. (d) Resolution of challenge. Immediately upon the final resolution of the challenge, the plan administrator must notify the PBGC in writing of the outcome of...

  4. 78 FR 51708 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Science.gov (United States)

    2013-08-21

    ... International Trade Administration North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section, International Trade Administration, Department... binational panel issued its decision in the review of the final results of the 2008-2009...

  5. 77 FR 29965 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

    Science.gov (United States)

    2012-05-21

    ... International Trade Administration North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section, International Trade Administration, Department... issued its decision in the review of the final results of the 2005/2006 antidumping administrative...

  6. Implementing a Multi-Agent System in Python with an Auction-Based Agreement Approach

    DEFF Research Database (Denmark)

    Ettienne, Mikko Berggren; Vester, Steen; Villadsen, Jørgen

    2012-01-01

    We describe the solution used by the Python-DTU team in the Multi-Agent Programming Contest 2011, where the scenario was called Agents on Mars. We present our auction-based agreement algorithm and discuss our chosen strategy and our choice of technology used for implementing the system. Finally, we...

  7. 78 FR 38298 - Ross Stores, Inc. et al., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2013-06-26

    ..., this Agreement shall be in full force and effect and shall be binding upon the parties. ] Effective...) appropriate communication of company compliance-related policies and procedures regarding the Final Rule and..., such as Twitter and Facebook), the content of which shall substantially conform to the terms of...

  8. CRADA/NFE-15-05761 Report: Additive Manufacturing of Isotropic NdFeB Bonded Permanent Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Paranthaman, M Parans [ORNL

    2016-07-18

    The technical objective of this technical collaboration phase I proposal is to fabricate net shape isotropic NdFeB bonded magnets utilizing additive manufacturing technologies at the ORNL MDF. The goal is to form complex shapes of thermoplastic and/or thermoset bonded magnets without expensive tooling and with minimal wasted material. Two additive manufacturing methods; the binder jet process; and big area additive manufacturing (BAAM) were used. Binder jetting produced magnets with the measured density of the magnet of 3.47 g/cm3, close to 46% relative to the NdFeB single crystal density of 7.6 g/cm3 were demonstrated. Magnetic measurements indicate that there is no degradation in the magnetic properties. In addition, BAAM was used to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic properties are: Intrinsic coercivity Hci = 8.65 kOe, Remanence Br = 5.07 kG, and energy product (BH)max = 5.47 MGOe (43.50 kJ/m3). This study provides a new pathway for preparing near-net shape bonded magnets for various magnetic applications.

  9. Final report on grand challenge LDRD project : a revolution in lighting : building the science and technology base for ultra-efficient solid-state lighting.

    Energy Technology Data Exchange (ETDEWEB)

    Copeland, Robert Guild; Mitchell, Christine Charlotte; Follstaedt, David Martin; Lee, Stephen Roger; Shul, Randy John; Fischer, Arthur Joseph; Chow, Weng Wah Dr.; Myers, Samuel Maxwell, Jr.; Thoma, Steven George; Gee, James Martin; Coltrin, Michael Elliott; Burdick, Brent A.; Salamone, Angelo, L., Jr.; Hadley, G. Ronald; Elliott, Russell D.; Campbell, Jonathan M.; Abrams, Billie Lynn; Wendt, Joel Robert; Pawlowski, Roger Patrick; Simpson, Regina Lynn; Kurtz, Steven Ross; Cole, Phillip James; Fullmer, Kristine Wanta; Seager, Carleton Hoover; Bogart, Katherine Huderle Andersen; Biefeld, Robert Malcolm; Kerley, Thomas M.; Norman, Adam K.; Tallant, David Robert; Woessner, Stephen Matthew; Figiel, Jeffrey James; Moffat, Harry K.; Provencio, Paula Polyak; Emerson, John Allen; Kaplar, Robert James; Wilcoxon, Jess Patrick; Waldrip, Karen Elizabeth; Rohwer, Lauren Elizabeth Shea; Cross, Karen Charlene; Wright, Alan Francis; Gonzales, Rene Marie; Salinger, Andrew Gerhard; Crawford, Mary Hagerott; Garcia, Marie L.; Allen, Mark S.; Southwell, Edwin T. (Perspectives, Sedona, AZ); Bauer, Tom M.; Monson, Mary Ann; Tsao, Jeffrey Yeenien; Creighton, James Randall; Allerman, Andrew Alan; Simmons, Jerry A.; Boyack, Kevin W.; Jones, Eric Daniel; Moran, Michael P.; Pinzon, Marcia J. (Perspectives, Sedona, AZ); Pinson, Ariane O. (Perspectives, Sedona, AZ); Miksovic, Ann E. (Perspectives, Sedona, AZ); Wang, George T.; Ashby, Carol Iris Hill; Missert, Nancy A.; Koleske, Daniel David; Rahal, Nabeel M.

    2004-06-01

    advances and breakthroughs, with Chapters 1-5 devoted to the five technical task areas: 1 Fundamental Materials Physics; 2 111-Nitride Growth Chemistry and Substrate Physics; 3 111-Nitride MOCVD Reactor Design and In-Situ Monitoring; 4 Advanced Light-Emitting Devices; and 5 Phosphors and Encapsulants. Chapter 7 (Appendix A) contains a listing of publications, presentations, and patents. Finally, the SSL GCLDRD resulted in numerous actual and pending follow-on programs for Sandia, including multiple grants from DOE and the Defense Advanced Research Projects Agency (DARPA), and Cooperative Research and Development Agreements (CRADAs) with SSL companies. Many of these follow-on programs arose out of contacts developed through our External Advisory Committee (EAC). In h s and other ways, the EAC played a very important role. Chapter 8 (Appendix B) contains the full (unedited) text of the EAC reviews that were held periodically during the course of the project.

  10. Politeness Strategies of the Provisional Agreement Document

    Directory of Open Access Journals (Sweden)

    Mohammad Shehadeh

    2017-02-01

    Full Text Available This work investigates the politeness strategies of the so-called provisional agreement document in Jordanian context. It shows that such a document maintains several politeness strategies that help resolve any tension between the parties involved. It reflects that politeness is not meant only to elevate the communication between people but also it is an important clue in cataloguing this communication when it occurs in situations where the relationship between the two interlocutors is doomed by tragic event such as murder or car accidents.

  11. AGREEMENT BETWEEN CERN AND UBS SA

    CERN Multimedia

    2002-01-01

    We wish to inform you that the agreement between CERN and UBS SA has been renewed for a period of five years with effect from 1st July 2002. This represents the culmination of work carried out since 1999 by a group consisting of representatives of the Finance Division, the SPL Division, the Staff Association and the Users Office. After analysis of the results of a market survey, it emerged that OVERALL the UBS offered the best conditions and guarantees for the CERN personnel. Owing to developments in the banking market, new conditions have had to be negotiated, which will be presented to you by the UBS (see article).

  12. Inter-rater Agreement on Sentence Formality

    CERN Document Server

    Lahiri, Shibamouli

    2011-01-01

    Formality is one of the most important dimensions of writing style variation. In this study we conducted an inter-rater reliability experiment for assessing sentence formality on a five-point Likert scale, and obtained good agreement results as well as different rating distributions for different sentence categories. We also performed a difficulty analysis to identify the bottlenecks of our rating procedure. Our main objective is to design an automatic scoring mechanism for sentence-level formality, and this study is important for that purpose.

  13. The Kyoto Agreement: Trade and Design

    DEFF Research Database (Denmark)

    Svendsen, Gert Tinggaard

    1999-01-01

    The Kyoto Agreement from 1997 allows trade of CO2 emission quotas between the 38 industrialized countries which have committed themselves to an emission ceiling. However, it does not define how this potential trade system should be designed. The intention was to clarify these matters during...... the 1999 conference in Buenos Aires. Nothing was decided at this conference, leaving open the question of how emission trade is supposed to take place. Therefore, this article aims to propose a design which is both politically and administratively feasible. It may, as such, catch the interest of both...

  14. USDOE/EPRI BIOMASS COFIRING COOPERATIVE AGREEMENT

    Energy Technology Data Exchange (ETDEWEB)

    E. Hughes; D. Tillman

    2000-10-01

    During the period of July 1, 2000 through September 30, 2000, alternatives for relocating the Seward Generating Station cofiring project were investigated. Allegheny Energy Supply Company LLC will accept the separate injection demonstration at its Albright Generating Station. During this period, also, efforts were made at program outreach. Papers were given at the Pittsburgh Coal Conference. This report summarizes the activities during the second calendar quarter in 2000 of the USDOE/EPRI Biomass Cofiring Cooperative Agreement. It focuses upon reporting the results of the relocation of Seward, and on the outreach efforts.

  15. Neural Network Solution For Service Level Agreement

    Directory of Open Access Journals (Sweden)

    Sarmad Al-Aloussi

    2013-03-01

    Full Text Available Service Oriented Computing is playing an important role in sharing the industry and the way business is conducted and services are delivered and managed. This paradigm is expected to have major impact on service economy; the service sector includes health services, financial services, government services, etc. This involves significant interaction between clients and service providers[1]. This paper is pointed in addressing the problem of enabling Service Level Agreement (SLA oriented resources allocation in data centers to satisfy competing applications demand for computing services. A QoS report designed to compare performance variables to QoS parameters and indicate when a threshold has been crossed. This paper was suggested a methodology which helps in SLA evaluation and comparison. The methodology was found on the adoption of policies both for service behavior and SLA description and on the definition of a metric function for evaluation and comparison of policies. In addition, this paper contributes a new philosophy to evaluate the agreements between user and service provider by monitoring the measurable and immeasurable qualities to extract the decision by using artificial neural networks (ANN.

  16. Agreement between radiographic and photographic trabecular patterns

    Energy Technology Data Exchange (ETDEWEB)

    Korstjens, C.M.; Geraets, W.G.M.; Stelt, P.F. van der [Dept. of Oral Radiology, Academic Centre for Dentistry, Amsterdam (Netherlands); Spruijt, R.J. [Div. of Psychosocial Research and Epidemiology, Netherlands Cancer Inst., Amsterdam (Netherlands); Mosekilde, L. [Dept. of Cell Biology, Univ. of Aarhus (Denmark)

    1998-11-01

    Purpose: It has been hypothesized that photographs can facilitate the interpretation of the radiographic characteristics of trabecular bone. The reliability of these photographic and radiographic approaches has been determined, as have various agreements between the two approaches and their correlations with biomechanical characteristics. Material and Methods: Fourteen vertebral bodies were obtained at autopsy from 6 women and 8 men aged 22-76 years. Photographs (n=28) and radiographs (n=28) were taken of midsagittal slices from the third lumbar vertebra. The radiographs and photographs were digitized and the geometric properties of the trabecular architecture were then determined with a digital images analysis technique. Information on the compressive strength and ash density of the vertebral body was also available. Results: The geometric properties of both radiographs and photographs could be measured with a high degree of reliability (Cronbach`s {alpha}>0.85). Agreement between the radiographic and photographic approaches was mediocre as only the radiographic measurements showed insignificant correlations (p<0.05) with the biomechanical characteristics. We suggest that optical phenomena may result in the significant correlations between the photographs and the biomechanical characteristics. Conclusion: For digital image processing, radiography offers a superior description of the architecture of trabecular bone to that offered by photography. (orig.)

  17. 32 CFR 21.680 - Technology investment agreements.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Technology investment agreements. 21.680 Section... AGREEMENT REGULATIONS DoD GRANTS AND AGREEMENTS-GENERAL MATTERS Definitions § 21.680 Technology investment... of the nation's technology and industrial base. Technology investment agreements include one kind...

  18. 32 CFR 37.1375 - Technology investment agreements.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Technology investment agreements. 37.1375... AGREEMENT REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1375 Technology investment agreements. A special class of assistance instruments used to increase involvement...

  19. Final report on reliability and lifetime prediction.

    Energy Technology Data Exchange (ETDEWEB)

    Gillen, Kenneth T; Wise, Jonathan; Jones, Gary D.; Causa, Al G.; Terrill, Edward R.; Borowczak, Marc

    2012-12-01

    This document highlights the important results obtained from the subtask of the Goodyear CRADA devoted to better understanding reliability of tires and to developing better lifetime prediction methods. The overall objective was to establish the chemical and physical basis for the degradation of tires using standard as well as unique models and experimental techniques. Of particular interest was the potential application of our unique modulus profiling apparatus for assessing tire properties and for following tire degradation. During the course of this complex investigation, extensive relevant information was generated, including experimental results, data analyses and development of models and instruments. Detailed descriptions of the findings are included in this report.

  20. Community-based naming agreement, familiarity, image agreement and visual complexity ratings among adult Indians

    Directory of Open Access Journals (Sweden)

    George Annamma

    2007-01-01

    Full Text Available The validity of Snodgrass and Vanderwart pictures and their norms derived on a western population on naming, familiarity, imageability and visual-complexity, is not established on a population with cultural background different from the west. We developed, therefore, a set of culturally appropriate pictures for and derived norms on Indians. Line-drawings of 103 concepts (67 from Snodgrass and Vanderwart, 36 new from 10 semantic-categories were normed on 200 community-based older subjects. Only 31% of the Snodgrass and Vanderwart items showed a concept-agreement on the Indians comparable to western norms. Naming, familiarity and image-agreement mutually correlated but not with visual-complexity. Low-education and rural-residence tended to reduced concept-agreement. The output of this study will be of use in national and cross-national studies.

  1. An agreement for applied research in Italy

    CERN Multimedia

    2002-01-01

    On 26 February, two of CERN's Directors-General had a very official handshake. Luciano Maiani, CERN's current Director-General, and Carlo Rubbia, one of his predecessors and current "commissario straordinario" of ENEA (Ente per le Nuove tecnologie, l'Energia e l'Ambiante, Institute for new technologies, energy and the environment) signed a collaboration agreement between their two organisations. ENEA carries out applied research in various fields such as renewable energies, new materials and medical applications. The organisation, which employs 3400 people in 10 laboratories in Italy, has a clear interest, therefore, in the technologies developed at CERN, which, in turn, seeks to promote them. Their collaboration will shortly lead to common research projects. CERN now has two Italian partners : INFN, its historical partner for particle physics research and ENEA for technological applications.

  2. The General Agreement on Trade in Services

    Directory of Open Access Journals (Sweden)

    Francina Esteve García

    1995-07-01

    Full Text Available The conclusion of GATS and its inclusion as an annex in the constitutive Agreement of the World Trade Organization (WTO responds to the need for disposing of a stable juridical instrument which, given the current economic interdependence between States, can be applied to the international trade in services.One of the main new features of this agreement is its field of application given that it includes all service sectors (except those provided for in the name of governmental authorities and the four forms of carrying out trade in services and, as regards the principle of market access and that of national treatment, will be regulated according to those respective obligations which the Members have assumed.In exchange for not accepting the exclusion of any service sector, the negotiations concerning some fundamental sectors could not be totally closed and deadlines were extended in order to unblock the most controversial themes.One of the fundamental principles of the GATS is the most favoured nation clause of inconditional character but its consecration has been attenuated by the possibility of maintaining important exceptions in its application. The principle of transparency is also essential in the field of services, given that this sector is characterised by large public interventionism in access regulation and the exercise of the different economic activities which form it.The balance of the GATS is globally positive given that it includes a multilateral framework of principles and disciplines which is administered in the headquarters of the WTO, which have been accepted by a great majority of States within the international community and which remain subject to the WTO’s mechanism for the solution of differences.However, the opening of the market and the suppression of restrictions which derive from internal regulations have not been achieved given that, orientating itself around the objectives of national politics, liberalization is

  3. Enhancing regional security agreements through cooperative monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Pregenzer, A.L.

    1995-05-01

    This paper proposes that strengthening regional capabilities for formulating and implementing arms control and confidence-building measures is a tangible method of enhancing regional security. It discusses the importance of developing a regional infrastructure for arms control and confidence building and elucidates the role of technology in facilitating regional arms control and confidence-building agreements. In addition, it identifies numerous applications for regional cooperative monitoring in the areas of arms control, resource management, international commerce and disaster response. The Cooperative Monitoring Center at Sandia National Laboratories, whose aim is to help individual countries and regions acquire the tools they need to develop their own solutions to regional problems, is discussed briefly. The paper ends with recommendations for establishing regional cooperative monitoring centers.

  4. Can the Paris Agreement stop global warming?

    DEFF Research Database (Denmark)

    Howalt Owe, Selina; Pedersen, Jens Olaf Pepke

    in the year 2030 of about 55 Gt Carbon to 40 Gt Carbon. This can be compared to an approximate emission of 35 Gt in 2014 and thus means that a global rise in emission of only 5 Gt Carbon is allowed over the next 15 years Using the Danish Center for Earth System Science (DCESS)model [1] we have investigated...... how large an emission reduction is necessary to keep the global temperatures below these targets.The DCESS model is a low order Earth system box model which includes atmosphere, ocean, ocean sediment, land biosphere and lithosphere components, and using the year 1765 as the preindustriallevel. We have...... examined different emission scenarios and the national commitments and find that even if the Paris Agreement is fulfilled, global temperatures will have increased by 1.5 degree C in 2030, and then only a yearly percentage reduction of 5% or more will be sufficient to keep temperatures below 2 degree C...

  5. High-efficiency one-sun photovoltaic module demonstration using solar-grade CZ silicon. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gee, J.M.

    1996-10-01

    This work was performed jointly by Sandia National Laboratories (Albuquerque, NM) and Siemens Solar Industries (Camarillo, CA) under a Cooperative Research and Development Agreement (CRADA 1248). The work covers the period May 1994 to March 1996. The purpose of the work was to explore the performance potential of commercial, photovoltaic-grade Czochralski (Cz) silicon, and to demonstrate this potential through fabrication of high-efficiency cells and a module. Fabrication of the module was omitted in order to pursue further development of advanced device structures. The work included investigation of response of the material to various fabrication processes, development of advanced cell structures using the commercial material, and investigation of the stability of Cz silicon solar cells. Some important achievements of this work include the following: post-diffusion oxidations were found to be a possible source of material contamination; bulk lifetimes around 75 pts were achieved; efficiencies of 17.6% and 15.7% were achieved for large-area cells using advanced cell structures (back-surface fields and emitter wrap-through); and preliminary investigations into photodegradation in Cz silicon solar cells found that oxygen thermal donors might be involved. Efficiencies around 20% should be possible with commercial, photovoltaic-grade silicon using properly optimized processes and device structures.

  6. MULTILATERAL ENVIRONMENTAL AGREEMENTS AND THE TRADE MEASURES CONTAINED IN THESE AGREEMENTS

    Directory of Open Access Journals (Sweden)

    Margareta Timbur

    2012-06-01

    Full Text Available The environmental problems which the society is facing, ozone depletion, biodiversity loss, the spread of persistent organic pollutants, are a result of human activity with a worldwide impact, requiring immediate resolution. In this context, negotiation, signing and implementation of several multilateral environmental agreements (MEAs are one of the best solutions, affordable and reliable. The aim of this study is to analyze the commercial measures, which to some extent, ensure stability, security, and expansion of MEAs. The paper discusses, also, the efficiency, necessity and the influences of trade measures in MEAs and the WTO role in signing these agreements.

  7. International Agreement Will Advance Radio Astronomy

    Science.gov (United States)

    2007-12-01

    Two of the world's leading astronomical institutions have formalized an agreement to cooperate on joint efforts for the technical and scientific advancement of radio astronomy. The National Radio Astronomy Observatory (NRAO) in the United States and the Max-Planck Institute for Radioastronomy (MPIfR) in Germany concluded a Memorandum of Understanding outlining planned collaborative efforts to enhance the capabilities of each other's telescopes and to expand their cooperation in scientific research. The VLBA The VLBA CREDIT: NRAO/AUI/NSF In the first project pursued under this agreement, the MPIfR will contribute $299,000 to upgrade the continent-wide Very Long Baseline Array's (VLBA) capability to receive radio emissions at a frequency of 22 GHz. This improvement will enhance the VLBA's scientific productivity and will be particularly important for cutting-edge research in cosmology and enigmatic cosmic objects such as gamma-ray blazars. "This agreement follows many years of cooperation between our institutions and recognizes the importance of international collaboration for the future of astronomical research," said Fred K.Y. Lo, NRAO Director. "Our two institutions have many common research goals, and joining forces to keep all our telescopes at the forefront of technology will be highly beneficial for the science," said Anton Zensus, Director at MPIfR. In addition to the VLBA, the NRAO operates the Very Large Array (VLA) in New Mexico and the Robert C. Byrd Green Bank Telescope (GBT) in West Virginia. The MPIfR operates the 100-meter Effelsberg Radio Telescope in Germany and the 12-meter APEX submillimeter telescope in 5100 m altitude in the Cilean Atacama desert (together with the European Southern Observatory and the Swedish Onsala Space Observatory). With the 100-meter telescope, it is part of the VLBA network in providing transatlantic baselines. Both institutions are members of a global network of telescopes (the Global VLBI Network) that uses simultaneous

  8. Political economy of preferential trade agreement: the case of bilateral asymmetric negotiation

    Directory of Open Access Journals (Sweden)

    Daniel Augusto Motta

    2007-06-01

    Full Text Available The purpose of this paper is to analyse the political economy of preferential trade agreements based on a sequential non-cooperative Stackelberg political game between a large economy and a small one, in which the political dispute of rival lobby groups defines the unilateral stance of both governments in the first stage; and the Stackelberg "coalition-proof" equilibrium defines the free trade agreement format in the second stage. Finally, a few modifications in the initial game structure are discussed in order to enhance the small economy's negotiation power. The political economy model is applied to FTAA case.

  9. Designing Comprehensive Partnering Agreements : An Introduction to the Partnering Agreement Scorecard

    NARCIS (Netherlands)

    S.M. Pfisterer (Stella); N. Payandeh (Nasim); S. Reid

    2014-01-01

    textabstractAgreements are a key mechanism of partnerships because their role is to govern interactions. They help partnerships become more effective by allowing partners to cope with relational, performance and situational risks that characterise inter-organisational relationships. The Partnerships

  10. Impacts of the Doha Round framework agreements on dairy policies.

    Science.gov (United States)

    Suzuki, N; Kaiser, H M

    2005-05-01

    export subsidies will be reduced in the Doha Round, possible exclusion of "sensitive" products from tariff reduction will help some countries' dairy sectors survive after those final agreements. A key concern for those countries will be the simultaneous restriction of surplus-disposing measures. With fewer marketing options for surpluses, countries that continue border protection and high internal prices will likely be forced to use domestic supply control programs in the future.

  11. Emergent velocity agreement in robot networks

    CERN Document Server

    Canepa, Davide; Izumi, Taisuke; Potop-Butucaru, Maria

    2011-01-01

    In this paper we propose and prove correct a new self-stabilizing velocity agreement (flocking) algorithm for oblivious and asynchronous robot networks. Our algorithm allows a flock of uniform robots to follow a flock head emergent during the computation whatever its direction in plane. Robots are asynchronous, oblivious and do not share a common coordinate system. Our solution includes three modules architectured as follows: creation of a common coordinate system that also allows the emergence of a flock-head, setting up the flock pattern and moving the flock. The novelty of our approach steams in identifying the necessary conditions on the flock pattern placement and the velocity of the flock-head (rotation, translation or speed) that allow the flock to both follow the exact same head and to preserve the flock pattern. Additionally, our system is self-healing and self-stabilizing. In the event of the head leave (the leading robot disappears or is damaged and cannot be recognized by the other robots) the flo...

  12. Gunnison County Airport Terminal solar cooperative agreement

    Energy Technology Data Exchange (ETDEWEB)

    Waller, L. H.; Kreider, J. F.

    1981-01-01

    The results of solar system performance studies carried out on the final construction of a passive space heating system for the Gunnison County Airport Terminal are presented. The principal topic discussed is the economic performance of the system with supporting material on thermal performance and system design. The conclusions of this study, using the methods of computer modeling and life-cycle economics are: (1) the final design passive solar heating system with night insulation will provide, on the average, 41% of the annual heating load for the terminal, (2) the passive system will result in a saving of 154 million Btu per year or, equivalently, 45,122 kWh per year, and (3) over a 40-year period the system is expected to save 3.1 million dollars in heating energy costs after the solar system investment has been paid off. Over the first 20-year period the net savings are approximately $100,000. The simple payback period is 13 years.

  13. Butanol / Gasoline Mercury CRADA Report

    Science.gov (United States)

    2015-03-01

    currently such as corn and sugar cane, and in the future other biomass, such as fast-growing grasses and agricultural waste products . This highlights its...exchange. The United States Government assumes no liability for its contents or use thereof. The United States Government does not endorse products or...Options for Coast Guard (CG) boats, identifying options for replacing the currently used ten percent ethanol (E10) gasoline for outboards. The study

  14. 10 CFR 603.890 - Final performance report.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Final performance report. 603.890 Section 603.890 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Award Terms Related to Other Administrative Matters Financial and Programmatic Reporting § 603.890 Final...

  15. 48 CFR 52.225-5 - Trade Agreements.

    Science.gov (United States)

    2010-10-01

    ... Agreement country (Aruba, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Estonia... Taipei))”, or United Kingdom); (2) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Mexico, Morocco, Nicaragua, Oman,...

  16. 48 CFR 613.303 - Blanket purchase agreements (BPAs).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Blanket purchase agreements (BPAs). 613.303 Section 613.303 Federal Acquisition Regulations System DEPARTMENT OF STATE....303 Blanket purchase agreements (BPAs)....

  17. 48 CFR 1313.303 - Blanket Purchase Agreements (BPAs).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Blanket Purchase Agreements (BPAs). 1313.303 Section 1313.303 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE....303 Blanket Purchase Agreements (BPAs)....

  18. 48 CFR 13.303 - Blanket purchase agreements (BPAs).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Blanket purchase agreements (BPAs). 13.303 Section 13.303 Federal Acquisition Regulations System FEDERAL ACQUISITION... Methods 13.303 Blanket purchase agreements (BPAs)....

  19. 48 CFR 313.303 - Blanket purchase agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Blanket purchase agreements. 313.303 Section 313.303 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES....303 Blanket purchase agreements....

  20. Agreement concerning Alamosa and Monte Vista National Wildlife Refuges

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Attached is a Letter of Agreement (Agreement) which Region 6 developed in concert with the Division of Refuges and the plaintiffs in the Audubon et. al. v. Babbitt...

  1. The energy agreement: what does it mean? Assessment of the agreements made; Het Energieakkoord. Wat gaat het betekenen? Inschatting van de gemaakte afspraken

    Energy Technology Data Exchange (ETDEWEB)

    Londo, M. [ECN Beleidsstudies, Amsterdam (Netherlands); Boot, P. [Planbureau voor de Leefomgeving PBL, Den Haag (Netherlands)

    2013-09-01

    The SER (Social and Economic Council of the Netherlands) Energy Agreement for Sustainable Growth outlines the ambition to provide a long-term perspective for the Dutch energy economy with short and medium term agreements. Therefore, a large number of concrete measures and elaborations are agreed upon. Quantitative assessments are made of the effects for 2020-2023. Because there are almost no concrete measures for a longer period and the uncertainties are increasing for the longer term, calculations were not carried out for years after 2023. The extent to which the agreed steps contribute to the necessary building blocks for the energy transition in the long term is assessed qualitatively. Agreed targets in the agreement are: (1) A reduction in final energy consumption by an average of 1.5% per year; (2) 100 PJ energy conservation in final energy consumption in 2020; (3) 14% renewable energy by 2020 and 16% in 2023; (4) at least 15,000 jobs with an emphasis on the next few years [Dutch] Het SER-Energieakkoord voor duurzame groei schetst als ambitie het bieden van een langetermijnperspectief voor onze energiehuishouding met afspraken voor de korte en middellange termijn. Het is daartoe een groot aantal concrete maatregelen en nadere uitwerkingen overeengekomen. ECN/PBL hebben met het EIB een kwantitatieve doorrekening gemaakt van de effecten voor 2020/23. Omdat er vrijwel geen concrete maatregelen zijn afgesproken die gericht zijn op een verder liggende periode en de onzekerheden op langere termijn steeds meer toenemen, is geen doorrekening voor latere jaren gemaakt. De mate waarin de afgesproken stappen bijdragen aan de nodige bouwstenen voor de energietransitie op langere termijn is kwalitatief beoordeeld. Afgesproken doelen in het akkoord zijn: (1) Een besparing van het finale energieverbruik met gemiddeld 1,5% per jaar; (2) 100 PJ besparing in het finale energieverbruik in 2020; (3) 14% hernieuwbare energie in 2020 en 16% in 2023; (4) Tenminste 15.000 banen met

  2. Assessing Two-Year-Olds' Knowledge of Number Agreement Morphology

    Science.gov (United States)

    Blossom, Megan

    2013-01-01

    Previous research in the area of children's knowledge of number agreement morphology has yielded mixed results. Some researchers have found evidence for sensitivity to agreement morphology at as early as 16 months, while others report that children do not comprehend number agreement morphology until as late as five or six years old. Studies of…

  3. 10 CFR 603.1340 - Technology investment agreement.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Technology investment agreement. 603.1340 Section 603.1340 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in this Part § 603.1340 Technology investment agreement. A TIA is a special type...

  4. Unfolding the phenomenon of inter-rater agreement

    DEFF Research Database (Denmark)

    Slaug, Bjørn; Schilling, Oliver; Helle, Tina

    2011-01-01

    Objective: The overall objective was to unfold the phenomenon of inter-rater agreement: to identify potential sources of variation in agreement data and to explore how they can be statistically accounted for. The ultimate aim was to propose recommendations for in-depth examination of agreement...

  5. 22 CFR 120.21 - Manufacturing license agreement.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Manufacturing license agreement. 120.21 Section 120.21 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.21 Manufacturing license agreement. An agreement (e.g., contract) whereby a U.S....

  6. 14 CFR 417.13 - Agreement with Federal launch range.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Agreement with Federal launch range. 417.13... Agreement with Federal launch range. Before conducting a licensed launch from a Federal launch range, a launch operator must— (a) Enter into an agreement with a Federal launch range to provide access to...

  7. 20 CFR 627.405 - Grant agreement and funding.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Grant agreement and funding. 627.405 Section... agreement and funding. (a)(1) Pursuant to § 627.200 of this part and the Governor/Secretary agreement, each...) Funding. The Secretary shall allot funds to the States in accordance with sections 162, 202, 252, 262,...

  8. Endogenous Depression in the Elderly: Prevalence and Agreement among Measures.

    Science.gov (United States)

    Gallagher-Thompson, Dolores; And Others

    1992-01-01

    Examined agreement among diagnoses made according to 5 definitions of endogenous depression in 99 depressed elders. Poor to fair agreement was generally demonstrated, except for Research Diagnostic Criteria and Diagnostic and Statistical Manual of Mental Disorders, which demonstrated excellent agreement. Mostly, demographic and clinical variables…

  9. Another Look at Inter-Rater Agreement. Research Report.

    Science.gov (United States)

    Zwick, Rebecca

    Most currently used measures of inter-rater agreement for the nominal case incorporate a correction for "chance agreement." The definition of chance agreement is not the same for all coefficients, however. Three chance-corrected coefficients are Cohen's Kappa; Scott's Pi; and the S index of Bennett, Goldstein, and Alpert, which has…

  10. 46 CFR 535.306 - Nonexclusive transshipment agreements-exemption.

    Science.gov (United States)

    2010-10-01

    ... agreement is a transshipment agreement by which one ocean common carrier serving a port of origin by direct... either carrier from entering into similar agreements with other carriers; (2) Guarantee any particular... tariff or tariffs shall provide: (1) The through rate; (2) The routings (origin, transshipment...

  11. 45 CFR 162.915 - Trading partner agreements.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Trading partner agreements. 162.915 Section 162... REQUIREMENTS ADMINISTRATIVE REQUIREMENTS General Provisions for Transactions § 162.915 Trading partner agreements. A covered entity must not enter into a trading partner agreement that would do any of...

  12. Joint operating agreements: An international comparison from petroleum law

    Energy Technology Data Exchange (ETDEWEB)

    Black, A.J.; Dundas, H.R.

    1992-12-31

    Joint Operating Agreements ({open_quotes}JOAs{close_quotes}) are often used in capital-intensive resource industries by parties who wish to restrict their exposure, particularly in limiting costs or liability. Investment prudence in these industries necessitates a mix of participants who contribute some or all of the financing, intelligence, access to market or privileged access to the project itself. Typically, standard form documents provide the terms in JOAs where the venture is one of a recurring nature. This article examines elements of JOAs as they relate to the United Kingdom Continental Shelf ({open_quotes}UKCS{close_quotes}) industry, contrasting these with American, Canadian, Australian and New Zealand petroleum laws practice. After a brief history of JOAs, the paper reviews several areas of concern: control of joint operations, fiduciary duties, change of operator and production in kind. The paper also discusses the extent of a participant`s and several other issues. A final section investigates the future of JOAs, concentrating on their current problems and prospects in resource industries.

  13. Implementing agreement on photovoltaic power systems - Annual report 2007

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2007. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids and PV environmental health and safety activities. The status and prospects in the 22 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  14. Implementing agreement on photovoltaic power systems - Annual report 2008

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2008. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids as well as health and safety activities. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  15. Implementing agreement on photovoltaic power systems - Annual report 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2006. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications and hybrid systems within mini-grids. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  16. Implementing agreement on photovoltaic power systems - Annual report 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2004. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  17. Implementing agreement on photovoltaic power systems - Annual report 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2005. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented. The tasks include the exchange and dissemination of information on photovoltaic power systems, the performance, reliability and analysis of photovoltaic systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries and urban-scale PV applications. The status and prospects in the 21 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  18. IEA Agreement on the production and utilization of hydrogen: 1999 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Elam, Carolyn C. (National Renewable Energy Lab, Golden, CO (US)) (ed.)

    2000-01-31

    The annual report begins with an overview of the IEA Hydrogen Agreement, including guiding principles and their strategic plan followed by the Chairman's report providing the year's highlights. Annex reports included are: the final report for Task 11, Integrated Systems; task updates for Task 12, Metal Hydrides and Carbon for Hydrogen Storage, Task 13, Design and Optimization of Integrated Systems, Task 14, Photoelectrolytic Production of Hydrogen, and Task 15, Photobiological Production of Hydrogen; and a feature article by Karsten Wurr titled 'Large-Scale Industrial Uses of Hydrogen: Final Development Report'.

  19. The New Enhanced Simple Authenticated Key Agreement Algorithm

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Simple authenticated key agreement algorithm is one of the Diffie-Hellman key agreement variations. It prevents man-inthe-middle attack with only two more packets required to agree on the secret session key, but it has some weaknesses. In this paper, a new enhanced simple authenticated key agreement algorithm is proposed to overcome these weaknesses on the basis of analyzing the weaknesses of the related protocols. The new enhanced simple authenticated key agreement algorithm can get over replay attack and password guessing attack, provide perfect forward secrecy, and hold the merits of the simple authenticated key agreement algorithm.

  20. Guidelines for Reporting Reliability and Agreement Studies (GRRAS) were proposed

    DEFF Research Database (Denmark)

    Kottner, Jan; Audigé, Laurent; Brorson, Stig;

    2011-01-01

    Results of reliability and agreement studies are intended to provide information about the amount of error inherent in any diagnosis, score, or measurement. The level of reliability and agreement among users of scales, instruments, or classifications is widely unknown. Therefore, there is a need...... for rigorously conducted interrater and intrarater reliability and agreement studies. Information about sample selection, study design, and statistical analysis is often incomplete. Because of inadequate reporting, interpretation and synthesis of study results are often difficult. Widely accepted criteria......, standards, or guidelines for reporting reliability and agreement in the health care and medical field are lacking. The objective was to develop guidelines for reporting reliability and agreement studies....

  1. Consultancy agreement between supervisory board members and the company whose activities they supervise

    Directory of Open Access Journals (Sweden)

    Arsen Bačić

    2015-09-01

    Finally, the author explains when and why Art. 270. Companies act must be implemented on consultancy agreements between a supervisory board member and a dependent company, a supervisory board member and a member of the board of managers and on contracts between the company whose supervisory board member is a member and the public limited company they supervise. The research concludes that the domestic law has appropriately regulated consulting activity of supervisory board members.

  2. Flux agreement above a Scots pine plantation

    Science.gov (United States)

    Gay, L. W.; Vogt, R.; Bernhofer, Ch.; Blanford, J. H.

    1996-03-01

    SEC system 3 were in reasonable agreement, while the BREB system appeared to overestimate H and underestimate LE; H and LE measured by SEC system 22 on the high tower were lower than from OPEC and SEC3 on the low tower. The turbulent flux measurements tended to converge, but the data exhibit unexplained differences between days, between systems, and between locations.

  3. Chemiresistor microsensors for in-situ monitoring of volatile organic compounds : final LDRD report.

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Michael Loren; Hughes, Robert Clark; Kooser, Ara S.; McGrath, Lucas K.; Ho, Clifford Kuofei; Wright, Jerome L.; Davis, Chad Edward

    2003-09-01

    This report provides a summary of the three-year LDRD (Laboratory Directed Research and Development) project aimed at developing microchemical sensors for continuous, in-situ monitoring of volatile organic compounds. A chemiresistor sensor array was integrated with a unique, waterproof housing that allows the sensors to be operated in a variety of media including air, soil, and water. Numerous tests were performed to evaluate and improve the sensitivity, stability, and discriminatory capabilities of the chemiresistors. Field tests were conducted in California, Nevada, and New Mexico to further test and develop the sensors in actual environments within integrated monitoring systems. The field tests addressed issues regarding data acquisition, telemetry, power requirements, data processing, and other engineering requirements. Significant advances were made in the areas of polymer optimization, packaging, data analysis, discrimination, design, and information dissemination (e.g., real-time web posting of data; see www.sandia.gov/sensor). This project has stimulated significant interest among commercial and academic institutions. A CRADA (Cooperative Research and Development Agreement) was initiated in FY03 to investigate manufacturing methods, and a Work for Others contract was established between Sandia and Edwards Air Force Base for FY02-FY04. Funding was also obtained from DOE as part of their Advanced Monitoring Systems Initiative program from FY01 to FY03, and a DOE EMSP contract was awarded jointly to Sandia and INEEL for FY04-FY06. Contracts were also established for collaborative research with Brigham Young University to further evaluate, understand, and improve the performance of the chemiresistor sensors.

  4. Corporate integrity agreements: making the best of a tough situation.

    Science.gov (United States)

    Ramsey, Robert B

    2002-03-01

    Healthcare providers increasingly are entering into corporate integrity agreements as part of settlements with the Federal government in fraud-and-abuse cases. Providers pursue these settlements to avoid the costs of defending themselves against fraud charges. However, the costs relating to the long-term compliance activity mandated in the settlement's corporate integrity agreement also can be substantial. These costs include significant staff resources that must be devoted to compliance efforts demanded by the agreement and the required engagement of consultants to monitor the organization's compliance. Healthcare financial managers should be familiar with the elements of a typical corporate integrity agreement and understand strategies for negotiating such an agreement. Effective negotiations can help minimize the organization's costs of compliance with the agreement and facilitate its ongoing implementation of the agreement.

  5. Inter-observer agreement for abdominal CT in unselected patients with acute abdominal pain

    Energy Technology Data Exchange (ETDEWEB)

    Randen, Adrienne van [University of Amsterdam, Department of Radiology, Academic Medical Center, Amsterdam (Netherlands); University of Amsterdam, Department of Surgery, Academic Medical Center, Amsterdam (Netherlands); Academic Medical Center, Amsterdam (Netherlands); Lameris, Wytze [University of Amsterdam, Department of Radiology, Academic Medical Center, Amsterdam (Netherlands); University of Amsterdam, Department of Surgery, Academic Medical Center, Amsterdam (Netherlands); Nio, C.Y.; Spijkerboer, Anje M.; Meier, Mark A.; Tutein Nolthenius, Charlotte; Smithuis, Frank; Stoker, Jaap [University of Amsterdam, Department of Radiology, Academic Medical Center, Amsterdam (Netherlands); Bossuyt, Patrick M. [University of Amsterdam, Department of Clinical Epidemiology, Biostatistics, and Bioinformatics, Academic Medical Center, Amsterdam (Netherlands); Boermeester, Marja A. [University of Amsterdam, Department of Surgery, Academic Medical Center, Amsterdam (Netherlands)

    2009-06-15

    The level of inter-observer agreement of abdominal computed tomography (CT) in unselected patients presenting with acute abdominal pain at the Emergency Department (ED) was evaluated. Two hundred consecutive patients with acute abdominal pain were prospectively included. Multi-slice CT was performed in all patients with intravenous contrast medium only. Three radiologists independently read all CT examinations. They recorded specific radiological features and a final diagnosis on a case record form. We calculated the proportion of agreement and kappa values, for overall, urgent and frequently occurring diagnoses. The mean age of the evaluated patients was 46 years (range 19-94), of which 54% were women. Overall agreement on diagnoses was good, with a median kappa of 0.66. Kappa values for specific urgent diagnoses were excellent, with median kappa values of 0.84, 0.90 and 0.81, for appendicitis, diverticulitis and bowel obstruction, respectively. Abdominal CT has good inter-observer agreement in unselected patients with acute abdominal pain at the ED, with excellent agreement for specific urgent diagnoses as diverticulitis and appendicitis. (orig.)

  6. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Schuur, Edward [Northern Arizona Univ., Flagstaff, AZ (United States); Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States)

    2016-12-01

    This final grant report is a continuation of the final grant report submitted for DE-SC0006982 as the Principle Investigator (Schuur) relocated from the University of Florida to Northern Arizona University. This report summarizes the original project goals, as well as includes new project activities that were completed in the final period of the project.

  7. Mitigating Interconnection Challenges of the High Penetration Utility-Interconnected Photovoltaic (PV) in the Electrical Distribution Systems: Cooperative Research and Development Final Report, CRADA Number CRD-14-563

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Sudipta [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    Various interconnection challenges exist when connecting distributed PV into the electrical distribution grid in terms of safety, reliability, and stability of the electric power systems. Some of the urgent areas for research, as identified by inverter manufacturers, installers and utilities, are potential for transient overvoltage from PV inverters, multi-inverter anti-islanding, impact of smart inverters on volt-VAR support, impact of bidirectional power flow, and potential for distributed generation curtailment solutions to mitigate grid stability challenges. Under this project, NREL worked with SolarCity to address these challenges through research, testing and analysis at the Energy System Integration Facility (ESIF). Inverters from different manufacturers were tested at ESIF and NREL's unique power hardware-in-the-loop (PHIL) capability was utilized to evaluate various system-level impacts. Through the modeling, simulation, and testing, this project eliminated critical barriers on high PV penetration and directly supported the Department of Energy's SunShot goal of increasing the solar PV on the electrical grid.

  8. CRADA final report: Technical assessment of roll-to-roll operation of lamination process, thermal treatment, and alternative carbon fiber precursors for low-cost, high-efficiency manufacturing of flow battery stacks and other energy devices

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Claus [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Madden, Thomas [Lockheed Martin Corp., Oak Ridge, TN (United States); Wood, III, David L [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Muth, Thomas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Warrington, Curtis [Lockheed Martin Corp., Oak Ridge, TN (United States); Ozcan, Soydan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Manson, Hunter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tekinalp, Halil L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Mark A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lu, Yuan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Loretz, Jeremy [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-23

    Among the various stationary-storage technologies under development, redox flow batteries (RFBs) offer the greatest potential to deliver inexpensive, scalable, and efficient grid-scale electrical-energy storage. Unlike traditional sealed batteries, in a flow battery power and energy are decoupled. Cell area and cell count in the stack determine the device power, and the chemical storage volume determines the total energy. Grid-scale energy-storage applications require megawatt-scale devices, which require the assembly of hundreds of large-area, bipolar cells per power plant. The cell-stack is the single system component with the largest impact on capital cost (due to the large number of highly engineered components) and operating costs (determined by overall round-trip efficiency).

  9. Micro-fluidic (Lab-on the- Chip) PCR Array Cartridge for Biological Screening in a Hand Held Device: FInal Report for CRADA no 264. PNNL-T2-258-RU with CombiMatrix Corp

    Energy Technology Data Exchange (ETDEWEB)

    Rainina, Evguenia I.

    2010-10-31

    The worldwide emergence of both new and old diseases resulting from human expansion and also human and materials mobility has and will continue to place stress on both medical and clinical diagnostics. The classical approach to bioagents detection involves the use of differential metabolic assays to determine species type in the case of most bacteria, or the use of cell culture and electron microscopy to diagnose viruses and some bacteria that are intracellular parasites. The long-term goal in bioagent detection is to develop a hand-held instrument featuring disposable cartridges which contain all the necessary reagents, reaction chambers, waste chambers, and micro-fluidics to extract, concentrate, amplify, and analyze nucleic acids. This GIPP project began development of a sensory platform using nucleic-acid based probes. Although research was not completed, initial findings indicated that an advanced sensing device could theoretically be built on a DNA/RNA-based technology platform.

  10. Advanced bioreactor concepts for gaseous substrates: Conversion of synthesis gas to liquid fuels and removal of SO{sub x} and NO{sub x} from coal combustion gases. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Kaufman, E.N.; Selvaraj, P.T.

    1997-10-01

    The purpose of the proposed research program was the development and demonstration of a new generation of gaseous substrate-based bioreactors for the production of liquid fuels from coal synthesis gas and the removal of NO{sub x} and SO{sub x} species from coal combustion flue gas. This study addressed the further investigation of optimal bacterial strains, growth media and kinetics for the biocatalytic conversion of coal synthesis gas to liquid fuel such as ethanol and the reduction of gaseous flue gas constituents. The primary emphasis was on the development of advanced bioreactor systems coupled with innovative biocatalytic systems that will provide increased productivity under controlled conditions. It was hoped that this would result in bioprocessing options that have both technical and economic feasibility, thus, ensuring early industrial use. Predictive mathematical models were formulated to accommodate hydrodynamics, mass transport, and conversion kinetics, and provide the data base for design and scale-up. The program was separated into four tasks: (1) Optimization of Biocatalytic Kinetics; (2) Development of Well-mixed and Columnar Reactors; (3) Development of Predictive Mathematical Models; and (4) Industrial Demonstration. Research activities addressing both synthesis gas conversion and flue gas removal were conducted in parallel by BRI and ORNL respectively.

  11. Cellulosic Biomass Sugars to Advantage Jet Fuel: Catalytic Conversion of Corn Stover to Energy Dense, Low Freeze Point Paraffins and Naphthenes: Cooperative Research and Development Final Report, CRADA Number CRD-12-462

    Energy Technology Data Exchange (ETDEWEB)

    Elander, Rick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-08-04

    NREL will provide scientific and engineering support to Virent Energy Systems in three technical areas: Process Development/Biomass Deconstruction; Catalyst Fundamentals; and Technoeconomic Analysis. The overarching objective of this project is to develop the first fully integrated process that can convert a lignocellulosic feedstock (e.g., corn stover) efficiently and cost effectively to a mix of hydrocarbons ideally suited for blending into jet fuel. The proposed project will investigate the integration of Virent Energy System’s novel aqueous phase reforming (APR) catalytic conversion technology (BioForming®) with deconstruction technologies being investigated by NREL at the 1-500L scale. Corn stover was chosen as a representative large volume, sustainable feedstock.

  12. Battery Pack Life Estimation through Cell Degradation Data and Pack Thermal Modeling for BAS+ Li-Ion Batteries. Cooperative Research and Development Final Report, CRADA Number CRD-12-489

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kandler [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-21

    Battery Life estimation is one of the key inputs required for Hybrid applications for all GM Hybrid/EV/EREV/PHEV programs. For each Hybrid vehicle program, GM has instituted multi-parameter Design of Experiments generating test data at Cell level and also Pack level on a reduced basis. Based on experience, generating test data on a pack level is found to be very expensive, resource intensive and sometimes less reliable. The proposed collaborative project will focus on a methodology to estimate Battery life based on cell degradation data combined with pack thermal modeling. NREL has previously developed cell-level battery aging models and pack-level thermal/electrical network models, though these models are currently not integrated. When coupled together, the models are expected to describe pack-level thermal and aging response of individual cells. GM and NREL will use data collected for GM's Bas+ battery system for evaluation of the proposed methodology and assess to what degree these models can replace pack-level aging experiments in the future.

  13. BEopt-CA (Ex) -- A Tool for Optimal Integration of EE/DR/ES+PV in Existing California Homes. Cooperative Research and Development Final Report, CRADA Number CRD-11-429

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, Craig [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-01-29

    Opportunities for combining energy efficiency, demand response, and energy storage with PV are often missed, because the required knowledge and expertise for these different technologies exist in separate organizations or individuals. Furthermore, there is a lack of quantitative tools to optimize energy efficiency, demand response and energy storage with PV, especially for existing buildings. Our goal is to develop a modeling tool, BEopt-CA (Ex), with capabilities to facilitate identification and implementation of a balanced integration of energy efficiency (EE), demand response (DR), and energy storage (ES) with photovoltaics (PV) within the residential retrofit market. To achieve this goal, we will adapt and extend an existing tool -- BEopt -- that is designed to identify optimal combinations of efficiency and PV in new home designs. In addition, we will develop multifamily residential modeling capabilities for use in California, to facilitate integration of distributed solar power into the grid in order to maximize its value to California ratepayers. The project is follow-on research that leverages previous California Solar Initiative RD&D investment in the BEopt software. BEopt facilitates finding the least cost combination of energy efficiency and renewables to support integrated DSM (iDSM) and Zero Net Energy (ZNE) in California residential buildings. However, BEopt is currently focused on modeling single-family houses and does not include satisfactory capabilities for modeling multifamily homes. The project brings BEopt's existing modeling and optimization capabilities to multifamily buildings, including duplexes, triplexes, townhouses, flats, and low-rise apartment buildings.

  14. Final Focus Test Stand final report

    CERN Document Server

    Jeremie, A; Burrows, P

    2013-01-01

    Future Linear colliders will need particle beam sizes in the nanometre range. The beam also needs to be stable all along the beam line and especially at the Final Focus section. A dedicated Final Focus test stand has been used for this study and is comprised of several sub-parts. First there is the Stabilisation/Isolation system with sensors and actuators stabilizing down to sub-nanometre level. Then the Magnet itself needs to comply with very specific design constraints. In addition to the mechanical items, the beam can be stabilized acting on the trajectory directly and Beam-based controls have been developed and tested on different accelerator facilities.

  15. Strategic Implications of the North American Free Trade Agreement (NAFTA)

    Science.gov (United States)

    1993-04-01

    Follow-on bilateral agreements with the United States brought investment and swift growth in exports. When Carlos Salinas de Gortari was elected...Free Trade Agreement (FTA), 5 President Salinas , joined Canadian Prime Minister Mulroney and U.S. President Bush in formally proposing the North...Mexico had completed negotiation of the North American Free Trade Agreement. President Bush, Prime Minister Mulroney, and President Salinas signed the

  16. Agreement properties and word order in comparative bantu

    OpenAIRE

    Morimoto, Yukiko

    2013-01-01

    Agreement is traditionally viewed as a cross-referencing device for core arguments such as subjects and (primary) objects.1 In this paper, I discuss data from Bantu languages that lead to a radical departure from this generally accepted position: agreement in a subset of Bantu languages cross-references a (sentential) topic rather than the subject. The crucial evidence for topic agreement comes from a construction known as subject-object (S-O) reversal, where the fronted patient agrees with w...

  17. 42 CFR 416.30 - Terms of agreement with CMS.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Terms of agreement with CMS. 416.30 Section 416.30... of agreement with CMS. As part of the agreement under § 416.26 the ASC must agree to the following... in subpart C of this part and to report promptly to CMS any failure to do so. (b) Limitation...

  18. Climate agreements under limited participation, asymmetric information and market imperfections

    Energy Technology Data Exchange (ETDEWEB)

    Hagem, Cathrine

    1996-12-31

    This thesis relates to climate agreements and cost efficiency by analysing the formation of a system of quota leading to distributed discharge of emissions between countries. Main fields concerned are the greenhouse effect, the political process, efficient and cost-effective climate agreements, and climate agreements under limited participation, asymmetric information and market imperfections covering fields like limited participation in climate agreements, limited participation and indirect impact on non-participating countries` emissions, limited participation and direct impact on non-participating countries` emissions under asymmetric information, and non-competitive market for tradeable quotas. 166 refs., 7 tabs.

  19. Statistical methods for assessing agreement between continuous measurements

    DEFF Research Database (Denmark)

    Sokolowski, Ineta; Hansen, Rikke Pilegaard; Vedsted, Peter

    ), concordance coefficient, Bland-Altman limits of agreement and percentage of agreement to assess the agreement between patient reported delay and doctor reported delay in diagnosis of cancer in general practice. Key messages: The correct statistical approach is not obvious. Many studies give the product......-moment correlation coefficient (r) between the results of the two measurements methods as an indicator of agreement, which is wrong. There have been proposed several alternative methods, which we will describe together with preconditions for use of the methods....

  20. Sequential rank agreement methods for comparison of ranked lists

    DEFF Research Database (Denmark)

    Ekstrøm, Claus Thorn; Gerds, Thomas Alexander; Jensen, Andreas Kryger;

    2015-01-01

    rank genes according to their difference in gene expression levels. This article constructs measures of the agreement of two or more ordered lists. We use the standard deviation of the ranks to define a measure of agreement that both provides an intuitive interpretation and can be applied to any number...... of lists even if some or all are incomplete or censored. The approach can identify change-points in the agreement of the lists and the sequential changes of agreement as a function of the depth of the lists can be compared graphically to a permutation based reference set. The usefulness of these tools...

  1. Cassini's Grand Finale: The Final Orbits

    Science.gov (United States)

    Spilker, Linda; Edgington, Scott

    2016-04-01

    The Cassini-Huygens mission, a joint collaboration between NASA, ESA and the Italian Space Agency, is approaching its last year of operations after nearly 12 years in orbit around Saturn. Cassini will send back its final bits of unique data on September 15th, 2017 as it plunges into Saturn's atmosphere, vaporizing and satisfying planetary protection requirements. Before that time Cassini will continue its legacy of exploration and discovery with 12 close flybys of Titan in 2016 and 2017 that will return new science data as well as sculpt the inclinations and periods of the final orbits. Even though all of our close icy satellite flybys, including those of Enceladus, are now completed, numerous Voyager-class flybys (summer solstice approaches. In November 2016 Cassini will transition to a series of orbits with peripases just outside Saturn's F ring. These 20 orbits will include close flybys of some tiny ring moons and excellent views of the F ring and outer A ring. The 126th and final close flyby of Titan will propel Cassini across Saturn's main rings and into its final orbits. Cassini's Grand Finale, starting in April 2017, is comprised of 22 orbits at an inclination of 63 degrees. Cassini will repeatedly dive between the innermost rings and the upper atmosphere of the planet providing insights into fundamental questions unattainable during the rest of the mission. Cassini will be the first spacecraft to explore this region. These close orbits provide the highest resolution observations of both the rings and Saturn, and direct in situ sampling of the ring particles, composition, plasma, Saturn's exosphere and the innermost radiation belts. Saturn's gravitational field will be measured to unprecedented accuracy, providing information on the interior structure of the planet, winds in the outer layers of Saturn's atmosphere, and the mass distribution in the rings. Probing the magnetic field will give insight into the nature of the magnetic dynamo, telling us: why the

  2. Implementing agreement on photovoltaic power systems - Annual report 2009

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This annual report for the International Energy Agency (IEA) reports on the programme's activities in 2009. The IEA Photovoltaic Power Systems Programme (PVPS) is one of the collaborative research and development agreements established within the IEA. Its mission is to enhance international collaboration efforts which support the development and deployment of photovoltaic solar energy. In this annual report, the programme's mission and its strategies for reaching four objectives are reviewed and status reports on the programme's various tasks and sub-tasks are presented, as are activities planned for 2010. The tasks include the exchange and dissemination of information on photovoltaic power systems, a study on very large scale photovoltaic power generation system, photovoltaic services for developing countries, urban-scale PV applications, hybrid systems within mini-grids, PV environmental health and safety activities, performance and reliability of PV systems and high penetration PV in electricity grids. The status and prospects in the 23 countries and organisations participating in the programme are presented. Along with country-specific topics, industry activities, research, development and demonstration projects, applications, education and governmental activities as well as future activities are reviewed. Finally, completed tasks are reviewed. These include the performance, reliability and analysis of photovoltaic systems, the use of photovoltaic power systems in stand-alone and island applications, grid interconnection of building integrated and other distributed photovoltaic power systems, design and operation of modular photovoltaic plants for large scale power generation and photovoltaic power systems in the built environment. The report is completed with a list of Executive Committee members and Operating Agents.

  3. 78 FR 73827 - Suspension Agreement on Certain Cut-to-Length Carbon Steel Plate From the Russian Federation...

    Science.gov (United States)

    2013-12-09

    ... Certain Cut-to-Length Carbon Steel Plate from the Russian Federation, 68 FR 3859 (January 27, 2003... of the Antidumping Duty Suspension Agreement, 78 FR 61333 (October 3, 2013) and accompanying Decision... Russian Federation; Final Results of Antidumping Duty Administrative Review AGENCY: Enforcement...

  4. The quid-pro-quo of environmental agreements: Reflections on industrial energy efficiency agreements from five countries

    Energy Technology Data Exchange (ETDEWEB)

    Helby, Peter

    2001-10-01

    This workshop paper reflects on the exchange of values between the government side and the business side, which is a core logic of environmental agreements. The reflections refer to case studies of industrial energy efficiency agreements from Denmark, France, Germany, Netherlands and Sweden, originating from the VAIE project (Voluntary Agreements, Implementation and Efficiency). The government bargaining chips discussed are monetary rewards, help to gain competitive advantage, regulatory flexibility and political protection. The business side bargaining chips are emission limits, organisational change, investments, information, submission to control and political pain reduction. The discussion underlines the need for substantial commitments by the government side, as a precondition for achieving effective agreements.

  5. Agreement Between Franklin Pierce College and Rindge Faculty Federation (AFT).

    Science.gov (United States)

    Franklyn Pierce Coll., Rindge, NH.

    This agreement was made on October 15, 1974 and is effective until September 1, 1975. Articles of the agreement cover: board-federation relationships; academic freedom; library collection; management rights; jury duty; union leave; temporary department chairman; teaching loads; faculty evaluation; grievance procedures; faculty appointment and…

  6. The future of human rights impact assessments of trade agreements

    NARCIS (Netherlands)

    Walker, S.M.

    2009-01-01

    The Future of Human Rights Impact Assessments of Trade Agreements develops a methodology for human rights impact assessments of trade agreements and considers whether there is any value in using the methodology on a sustained basis to ensure that the human dimensions of international trade are taken

  7. Distributed control design for nonlinear output agreement in convergent systems

    NARCIS (Netherlands)

    Weitenberg, Erik; De Persis, Claudio

    2015-01-01

    This work studies the problem of output agreement in homogeneous networks of nonlinear dynamical systems under time-varying disturbances using controllers placed at the nodes of the networks. For the class of contractive systems, necessary and sufficient conditions for output agreement are derived,

  8. Polytechnic Institute of Brooklyn Agreement 1971-74.

    Science.gov (United States)

    New York Polytechnic Inst., NY.

    This document contains the agreement between the Polytechnic Institute of Brooklyn (PIB) and the American Association of University Professors, PIB Chapter, covering the period from September 1, 1971 through May 31, 1974. Covered in the articles of the agreement are sections on appointments, promotions, tenure, teaching load, compensation, leaves…

  9. 48 CFR 16.703 - Basic ordering agreements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Basic ordering agreements. 16.703 Section 16.703 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION...) Application. A basic ordering agreement may be used to expedite contracting for uncertain requirements...

  10. 19 CFR 114.2 - Customs Conventions and Agreements.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs Conventions and Agreements. 114.2 Section 114.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARNETS General Provisions § 114.2 Customs Conventions and Agreements....

  11. 7 CFR 762.147 - Servicing shared appreciation agreements.

    Science.gov (United States)

    2010-01-01

    ... the value of the security at the time of writedown, as shown on the shared appreciation agreement. (ii... 7 Agriculture 7 2010-01-01 2010-01-01 false Servicing shared appreciation agreements. 762.147..., DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS GUARANTEED FARM LOANS § 762.147 Servicing shared...

  12. 13 CFR 130.600 - Cooperative agreement. [Reserved

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Cooperative agreement. 130.600 Section 130.600 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS DEVELOPMENT CENTERS § 130.600 Cooperative agreement....

  13. Service offerings and agreements a guide for ITIL exam candidates

    CERN Document Server

    Griffiths, Richard

    2014-01-01

    By implementing good practice in service offerings and agreements, IT departments can achieve customer satisfaction. Providing clarification and expansion of the core ITIL® texts, this new edition reflects the current thinking from ITIL and is aligned to the latest syllabus for the Intermediate Certificate in Service Offerings and Agreements.

  14. 20 CFR 322.5 - Payments under vacation agreements.

    Science.gov (United States)

    2010-04-01

    ... INSURANCE ACT REMUNERATION § 322.5 Payments under vacation agreements. (a) General. In ascertaining the accrual of remuneration under a vacation agreement, consideration shall be given to the applicable... to the contrary, be considered to be remuneration with respect to the days to which the payment...

  15. Shaanxi Gold Group Signed Strategic Cooperation Agreements With Five Enterprises

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    Recently,Shaanxi Gold Group Inc.successfully signed strategic cooperation agreements and secondary member agency agreements with 5 related enterprises in Shaanxi including Northwest Nonferrous Metals Research Institute,Baoti Group Co.,Ltd,Hanzhong Zinc Industry Co.,Ltd,Shaanxi Zinc Industry Co.,Ltd,and Shaanxi Feng

  16. 29 CFR 1202.2 - Interpretation of mediation agreements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Interpretation of mediation agreements. 1202.2 Section 1202.2 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD RULES OF PROCEDURE § 1202.2 Interpretation of mediation agreements. Under section 5, Second, of title I of the Railway...

  17. 29 CFR 1203.3 - Interpretation of mediation agreements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Interpretation of mediation agreements. 1203.3 Section 1203.3 Labor Regulations Relating to Labor (Continued) NATIONAL MEDIATION BOARD APPLICATIONS FOR SERVICE § 1203.3 Interpretation of mediation agreements. (a) Applications may be filed with the Board's Chief...

  18. 15 CFR 296.8 - Joint venture agreement.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Joint venture agreement. 296.8 Section... PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and no costs shall be incurred under a TIP project by the joint venture members until such time as...

  19. Beyond the dogma of the fixed book price agreement

    NARCIS (Netherlands)

    van der Ploeg, F.

    2004-01-01

    After describing the essential features of the book market, a welfare analysisof the fixed book price agreement is given. Allowance is made for theopportunity cost of reading. Theoretically such an agreement pushes up bookprices and depresses book sales. However, more titles will be published,partic

  20. Material transfer agreements : A review of modes and impacts

    NARCIS (Netherlands)

    Rodriguez, V.

    2009-01-01

    Sharing or exchanging research material is typically formalised through material transfer agreements. The aim of this article is to put into critical perspective the empirical findings on modes and impacts of these agreements vis-a-vis commonly accepted concerns formulated in a Mertonian fashion for

  1. Material Transfer Agreements: A Review of Modes and Impacts

    NARCIS (Netherlands)

    Rodriguez, Victor

    2009-01-01

    Sharing or exchanging research material is typically formalised through material transfer agreements. The aim of this article is to put into critical perspective the empirical findings on modes and impacts of these agreements vis--vis commonly accepted concerns formulated in a Mertonian fashion for

  2. 44 CFR 206.391 - FEMA-State Agreement.

    Science.gov (United States)

    2010-10-01

    ... HOMELAND SECURITY DISASTER ASSISTANCE FEDERAL DISASTER ASSISTANCE Fire Suppression Assistance § 206.391... continuing FEMA-State Agreement for Fire Suppression Assistance (the Agreement) signed by the Governor and... for the Disaster Assistance Directorate may require and specifies the type and extent of...

  3. 48 CFR 213.303 - Blanket purchase agreements (BPAs).

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Blanket purchase agreements (BPAs). 213.303 Section 213.303 Federal Acquisition Regulations System DEFENSE ACQUISITION... PROCEDURES Simplified Acquisition Methods 213.303 Blanket purchase agreements (BPAs)....

  4. 7 CFR 1730.64 - Power purchase agreements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Power purchase agreements. 1730.64 Section 1730.64 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF... Power purchase agreements. Nothing in this subpart requires the borrower to enter into purchase...

  5. 7 CFR 1405.7 - Uruguay Round Agreements Act.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Uruguay Round Agreements Act. 1405.7 Section 1405.7... Uruguay Round Agreements Act. In the event the outlays by the United States for domestic support measures will exceed, in any required reporting period, the allowable levels under the Uruguay Round...

  6. 5 CFR 2634.306 - Agreements and arrangements.

    Science.gov (United States)

    2010-01-01

    ... arrangement of the filer in existence at any time during the reporting period with respect to: (a) Future... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Agreements and arrangements. 2634.306....306 Agreements and arrangements. Each financial disclosure report filed pursuant to this subpart...

  7. LEGAL NATURE OF CORPORATE AGREEMENT IN THE RUSSIAN LAW

    Directory of Open Access Journals (Sweden)

    Rudenko E. Y.

    2016-04-01

    Full Text Available Legal consolidation of the corporate agreement institution in the Civil Code of the Russian Federation allowed the participants of business companies to implement and manage corporate rights in accordance with this agreement. However, reception of the institution and the lack of uniform court practice gave rise to many doctrinal disputes about the legal nature of the contract. The article presents the opinions of scientists on the issue of what rules of areas of law regulate the corporate agreement, whether it is separate or complex legal institution. The authors consider that the corporate agreement is governed exclusively by the rules of civil law. The corporate agreement is not a contract or an obligation in the traditional sense, however, it should be subjected to the general rules of obligations and contract law The corporate agreement has features of the unnamed contract, but despite this, it should be recognized as an independent civil law named contract. It is needed to ensure that, in addition to the general rules of the Obligations and Contracts, the rules of a treaty on the rights of participants of the limited liability and stockholders' agreement are applied to the corporate agreement

  8. 7 CFR 1150.134 - Nominee's agreement to serve.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE DAIRY PROMOTION PROGRAM Dairy Promotion and Research Order National Dairy Promotion and Research Board § 1150.134 Nominee's agreement to serve. Any...

  9. 7 CFR 1160.203 - Nominee's agreement to serve.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Milk), DEPARTMENT OF AGRICULTURE FLUID MILK PROMOTION PROGRAM Fluid Milk Promotion Order National Fluid Milk Processor Promotion Board § 1160.203 Nominee's agreement to serve....

  10. Mother-Child Agreement on the Child's Past Food Exposure

    Science.gov (United States)

    Thongudomporn, Udom; Chongsuvivatwong, Virasakdi; Geater, Alan F.

    2010-01-01

    Objective: To assess mother-child agreement on the child's past food exposure, and factors affecting response discrepancy. Methods: Twelve- to 14-year-old children and their mothers (n = 78) in an urban community, a rural community, and 2 orthodontic clinics completed a 69-item food questionnaire to determine mother-child level of agreement on the…

  11. 28 CFR 0.96a - Interstate Agreement on Detainers.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Interstate Agreement on Detainers. 0.96a Section 0.96a Judicial Administration DEPARTMENT OF JUSTICE ORGANIZATION OF THE DEPARTMENT OF JUSTICE Bureau of Prisons § 0.96a Interstate Agreement on Detainers. The Director of the Bureau of Prisons...

  12. ASYNCHRONOUS BYZANTINE AGREEMENT PROTOCOL BASED ON VERIFIABLE SIGNATURE SHARING

    Institute of Scientific and Technical Information of China (English)

    Ji Dongyao; Feng Dengguo

    2006-01-01

    An ([n / 3]- 1 )-resilient Asynchronous Byzantine Agreement Protocol (ABAP) that combines verifiable signature sharing and random secret sharing is proposed. The protocol works in the asynchronous network environment and produces Byzantine agreement within a fixed expected number of computational rounds. The correctness of the protocol is proved in theory.

  13. Guidelines for Reporting Reliability and Agreement Studies (GRRAS) were proposed

    DEFF Research Database (Denmark)

    Kottner, Jan; Audige, Laurent; Brorson, Stig;

    2011-01-01

    Results of reliability and agreement studies are intended to provide information about the amount of error inherent in any diagnosis, score, or measurement. The level of reliability and agreement among users of scales, instruments, or classifications is widely unknown. Therefore, there is a need ...

  14. Observers' Agreement on Measurements in Fiberoptic Endoscopic Evaluation of Swallowing.

    Science.gov (United States)

    Pilz, Walmari; Vanbelle, Sophie; Kremer, Bernd; van Hooren, Michel R; van Becelaere, Tine; Roodenburg, Nel; Baijens, Laura W J

    2016-04-01

    This study analyzed the effect that dysphagia etiology, different observers, and bolus consistency might have on the level of agreement for measurements in FEES images reached by independent versus consensus panel rating. Sixty patients were included and divided into two groups according to dysphagia etiology: neurological or head and neck oncological. All patients underwent standardized FEES examination using thin and thick liquid consistencies. Two observers scored the same exams, first independently and then in a consensus panel. Four ordinal FEES variables were analyzed. Statistical analysis was performed using a linear weighted kappa coefficient and Bayesian multilevel model. Intra- and interobserver agreement on FEES measurements ranged from 0.76 to 0.93 and from 0.61 to 0.88, respectively. Dysphagia etiology did not influence observers' agreement level. However, bolus consistency resulted in decreased interobserver agreement for all measured FEES variables during thin liquid swallows. When rating on the consensus panel, the observers deviated considerably from the scores they had previously given on the independent rating task. Observer agreement on measurements in FEES exams was influenced by bolus consistency, not by dysphagia etiology. Therefore, observer agreement on FEES measurements should be analyzed by taking bolus consistency into account, as it might affect the interpretation of the outcome. Identifying factors that might influence agreement levels could lead to better understanding of the rating process and assist in developing a more precise measurement scale that would ensure higher levels of observer agreement for measurements in FEES exams.

  15. 12 CFR 619.9200 - Loss-sharing agreements.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Loss-sharing agreements. 619.9200 Section 619.9200 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9200 Loss-sharing agreements. A contractual arrangement under which the parties agree to share losses...

  16. 12 CFR 725.21 - Modification of agreements.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Modification of agreements. 725.21 Section 725.21 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS NATIONAL CREDIT UNION ADMINISTRATION CENTRAL LIQUIDITY FACILITY § 725.21 Modification of agreements....

  17. 78 FR 12108 - New Postal Product; Negotiated Service Agreement

    Science.gov (United States)

    2013-02-21

    ... New Postal Product; Negotiated Service Agreement AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is noticing a recent Postal Service filing concerning an amendment to the existing Express Mail & Priority Mail Contract 11 Negotiated Service Agreement. This notice informs the public...

  18. 5 CFR 2634.803 - Notification of ethics agreements.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Notification of ethics agreements. 2634.803 Section 2634.803 Administrative Personnel OFFICE OF GOVERNMENT ETHICS GOVERNMENT ETHICS EXECUTIVE BRANCH FINANCIAL DISCLOSURE, QUALIFIED TRUSTS, AND CERTIFICATES OF DIVESTITURE Ethics Agreements §...

  19. The Proposed U.S.-Panama Free Trade Agreement

    Science.gov (United States)

    2011-04-21

    willing to locate in a former banana plantation. Two initiatives were controversial: a six-year moratorium on collective bargaining rights and the... Sheets : U.S.-Panama Trade Promotion Agreement, April 19, 2011. The Proposed U.S.-Panama Free Trade Agreement Congressional Research Service 31

  20. The Paris Agreement: Consequences for the EU and Carbon Markets?

    Directory of Open Access Journals (Sweden)

    Steinar Andresen

    2016-09-01

    Full Text Available Most observers argue that this agreement is a step in the right direction. However, we do not know how effective it will be in terms of reducing emissions. We therefore discuss its potential effectiveness regarding EU climate policies and carbon markets. We argue that the Paris Agreement may have a positive effect but uncertainties abound.