WorldWideScience

Sample records for aggregate processing technology

  1. Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash

    Energy Technology Data Exchange (ETDEWEB)

    Milton Wu; Paul Yuran

    2006-12-31

    Universal Aggregates LLC (UA) was awarded a cost sharing Co-operative Agreement from the Department of Energy (DOE) through the Power Plant Improvement Initiative Program (PPII) to design, construct and operate a lightweight aggregate manufacturing plant at the Birchwood Power Facility in King George, Virginia in October 2001. The Agreement was signed in November 2002. The installation and start-up expenses for the Birchwood Aggregate Facility are $19.5 million. The DOE share is $7.2 million (37%) and the UA share is $12.3 million (63%). The original project team consists of UA, SynAggs, LLC, CONSOL Energy Inc. and P. J. Dick, Inc. Using 115,000 ton per year of spray dryer ash (SDA), a dry FGD by-product from the power station, UA will produce 167,000 tons of manufactured lightweight aggregate for use in production of concrete masonry units (CMU). Manufacturing aggregate from FGD by-products can provide an economical high-volume use and substantially expand market for FGD by-products. Most of the FGD by-products are currently disposed of in landfills. Construction of the Birchwood Aggregate Facility was completed in March 2004. Operation startup was begun in April 2004. Plant Integration was initiated in December 2004. Integration includes mixing, extrusion, curing, crushing and screening. Lightweight aggregates with proper size gradation and bulk density were produced from the manufacturing aggregate plant and loaded on a stockpile for shipment. The shipped aggregates were used in a commercial block plant for CMU production. However, most of the production was made at low capacity factors and for a relatively short time in 2005. Several areas were identified as important factors to improve plant capacity and availability. Equipment and process control modifications and curing vessel clean up were made to improve plant operation in the first half of 2006. About 3,000 tons of crushed aggregate was produced in August 2006. UA is continuing to work to improve plant

  2. Technology or Process First?

    DEFF Research Database (Denmark)

    Siurdyban, Artur Henryk; Svejvig, Per; Møller, Charles

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...... and technology factors in organizations. Theoretical implications call for a design-oriented view of technology and process alignment....

  3. Kinetics of a Migration-Driven Aggregation-Fragmentation Process

    Institute of Scientific and Technical Information of China (English)

    ZHUANG You-Yi; LIN Zhen-Quan; KE Jian-Hong

    2003-01-01

    We propose a reversible model of the migration-driven aggregation-fragmentation process with the sym-metric migration rate kernels K(k;j) = K'(k;j) = λkjv and the constant aggregation rates I1, I2 and fragmentationrates J1, J2. Based on the mean-field theory, we investigate the evolution behavior of the aggregate size distributions inseveral cases with different values of index v. We find that the fragmentation reaction plays a more important role in the kinetic behaviors of the system than the aggregation and migration. When J1 = 0 and J2 = 0, the aggregate sizedistributions ak(t) and bk(t) obey the conventional scaling law, while when J1 > 0 and J2 > 0, they obey the modifiedscaling law with an exponential scaling function. The total mass of either species remains conserved.

  4. Reduction in soil aggregation in response to dust emission processes

    Science.gov (United States)

    Swet, Nitzan; Katra, Itzhak

    2016-09-01

    Dust emission by aeolian (wind) soil erosion depends on the topsoil properties of the source area, especially on the nature of the aggregates where most dust particles are held. Although the key role of soil aggregates in dust emission, the response of soil aggregation to aeolian processes and its implications for dust emission remain unknown. This study focuses on aggregate size distribution (ASD) analyses before and after in-situ aeolian experiments in semiarid loess soils that are associated with dust emission. Wind tunnel simulations show that particulate matter (PM) emission and saltation rates depend on the initial ASD and shear velocity. Under all initial ASD conditions, the content of saltator-sized aggregates (63-250 μm) increased by 10-34% due to erosion of macro-aggregates (> 500 μm), resulting in a higher size ratio (SR) between the saltators and macro-aggregates following the aeolian erosion. The results revealed that the saltator production increases significantly for soils that are subjected to short-term (anthropogenic) disturbance of the topsoil. The findings highlight a decrease in soil aggregation for all initial ASD's in response to aeolian erosion, and consequently its influence on the dust emission potential. Changes in ASD should be considered as a key parameter in dust emission models of complex surfaces.

  5. Mineral Processing Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-09-01

    This document represents the roadmap for Processing Technology Research in the US Mining Industry. It was developed based on the results of a Processing Technology Roadmap Workshop sponsored by the National Mining Association in conjunction with the US Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Industrial Technologies. The Workshop was held January 24 - 25, 2000.

  6. SERS-active nanoparticle aggregate technology for tags and seals

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Leif O [Los Alamos National Laboratory; Montoya, Velma M [Los Alamos National Laboratory; Havrilla, George J [Los Alamos National Laboratory; Doorn, Stephen K [Los Alamos National Laboratory

    2010-06-03

    In this paper, we describe our efforts to create a modern tagging and sealing technology for international safeguards application. Our passive tagging methods are based on SANAs (SERS-Active Nanoparticle Aggregates; SERS: Surface Enhanced Raman Scattering). These SANAs offer robust spectral barcoding capability in an inexpensive tag/seal, with the possibility of rapid in-field verification that requires no human input. At INMM 2009, we introduced SANAs, and showed approaches to integrating our technology with tags under development at Sandia National Laboratories (SNL). Here, we will focus on recent LANL development work, as well as adding additional dimensionality to the barcoding technique. The field of international safeguards employs a broad array of tags, seals, and tamper-indicating devices to assist with identification, tracking, and verification of components and materials. These devices each have unique strengths suited to specific applications, and span a range of technologies from passive metal cup seals and adhesive seals to active, remotely monitored fiber optic seals. Regardless of the technology employed, essential characteristics center around security, environmental and temporal stability, ease of use, and the ability to provide confidence to all parties. Here, we present a new inexpensive tagging technology that will deliver these attributes, while forming the basis of either a new seal, or as a secure layer added to many existing devices. Our approach uses the Surface Enhanced Raman Scattering (SERS) response from SANAs (SERS-Active Nanoparticle Aggregates, Figure 1) to provide a unique identifier or signature for tagging applications. SANAs are formed from gold or silver nanoparticles in the 40-80 nm size range. A chemical dye is installed on the nanoparticle surface, and the nanoparticles are then aggregated into ensembles of {approx}100 to 500 nm diameter, prior to being coated with silica. The silica shell protects the finished SANA from

  7. Waste water treatment technology for aggregate processing and concrete production of Xiangjiaba Hydropower Station%向家坝电站砂石加工及混凝土生产废水处理技术

    Institute of Scientific and Technical Information of China (English)

    徐翔

    2015-01-01

    砂石加工及混凝土生产系统所产生的废水是水电站施工中废水排放的主要来源。传统的废水处理工艺存在着占用场地面积大、沉淀池排泥困难、污泥脱水能力不足或循环时间长等问题。向家坝工程砂石加工的废水处理系统设计结合当地条件采用水库型沉淀池,解决了传统废水处理工艺带来的难题。详细介绍了该废水处理系统的生产工况、主要参数、经济效益及改进方向等。向家坝水电站废水处理技术的应用与探索,为水电站施工废水处理实现“零排放”目标拓展了新的思路。%The waste water from aggregate processing and concrete production system is the main sources of the waste water in hydropower station construction .The problems of large land occupation , difficult sludge discharge of settling pool , insufficient sludge dewatering capacity and long circular period etc .trouble the traditional waste water treatment .According to local condi-tion, the reservoir-type settling pool was adopted for the waster water treatment system , which successfully solved the above dif-ficulties.The detail production situation , main parameters , economic benefit and improvement direction etc .of the waste water treatment system are introduced .The application and exploration of waste water treatment technology provides a new thought for realizing "zero release"of waste water .

  8. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  9. Technologies for Optical Processing

    DEFF Research Database (Denmark)

    Stubkjær, Kristian

    2008-01-01

    The article consists of a Powerpoint presentation on technologies for optical processing. The paper concludes that the nonlinear elements based on SOA, fibers and waveguide structures have capabilities of simple processing at data rates of 100-600 Gb/s. Switching powers comparable to electronics...

  10. Document analysis using an aggregative and iterative process.

    Science.gov (United States)

    Rasmussen, Philippa; Muir-Cochrane, Eimear; Henderson, Ann

    2012-06-01

    This paper is a descriptive commentary concerning the use of document analysis in qualitative research concerned with developing an understanding of the role of child and adolescent mental health nursing in an inpatient. The document analysis was undertaken using thematic analysis with both an iterative process (Attride-Stirling) and an aggregative process, the Joanna Briggs Institute Thematic Analysis Program (TAP). After the initial iterative process the data were entered into an online software program, TAP, for aggregation and further analysis. The TAP software consisted of a three-step approach in the analysis of data extraction of illustrations, aggregation to categories and synthesis of categories into themes. A TAP chart was generated displaying the connections between the illustrations, categories and themes. The advantage and limitations of utilising the TAP software compared with Computer Assisted Qualitative Data Analysis Software were discussed. The program afforded direct involvement by the researcher in the cognitive process of the analysis; rather than just the technical process. A limitation of the program would be the volume of the data if the research involved a vast amount of data. The TAP program was a clearly defined three-step software program that was appropriate for the documents analysis for the research. The program would have a wide application for facilitating the thematic analysis of documents, although the program is suitable for smaller amounts of data.

  11. THE ASSESSMENT OF OPPORTUNITIES AND THREATS FOR CHANGES OF TECHNOLOGIES AGGREGATE THROUGH ORDER PARAMETERS

    Directory of Open Access Journals (Sweden)

    T.A. Nelyubina

    2009-09-01

    Full Text Available In this article, author considers a class of technologies aggregates, which can be present as complex socio-economic systems. The order parameters are chosen as instrument of reflect the system integrity of this technologies aggregates. The analysis of aggregates through order parameters permit: to diagnose the state of the system and its life phase, understand the compatibility extent between the current state of system and the assumed modifications in it, understand the nature of attendant risks. It also allows to compare the systems, track the dynamics of order parameters and forecast the trends of the future changes. Author formulates number and definitions of order parameters for this class of technologies aggregates; proposes the assessment method of condition of order parameters for technologies aggregate of region; makes express-assessment of preparedness level of technologies aggregates of some regions to innovation changes.

  12. Lipids in Amyloid-β Processing, Aggregation, and Toxicity.

    Science.gov (United States)

    Morgado, Isabel; Garvey, Megan

    2015-01-01

    Aggregation of amyloid-beta (Aβ) peptide is the major event underlying neuronal damage in Alzheimer's disease (AD). Specific lipids and their homeostasis play important roles in this and other neurodegenerative disorders. The complex interplay between the lipids and the generation, clearance or deposition of Aβ has been intensively investigated and is reviewed in this chapter. Membrane lipids can have an important influence on the biogenesis of Aβ from its precursor protein. In particular, increased cholesterol in the plasma membrane augments Aβ generation and shows a strong positive correlation with AD progression. Furthermore, apolipoprotein E, which transports cholesterol in the cerebrospinal fluid and is known to interact with Aβ or compete with it for the lipoprotein receptor binding, significantly influences Aβ clearance in an isoform-specific manner and is the major genetic risk factor for AD. Aβ is an amphiphilic peptide that interacts with various lipids, proteins and their assemblies, which can lead to variation in Aβ aggregation in vitro and in vivo. Upon interaction with the lipid raft components, such as cholesterol, gangliosides and phospholipids, Aβ can aggregate on the cell membrane and thereby disrupt it, perhaps by forming channel-like pores. This leads to perturbed cellular calcium homeostasis, suggesting that Aβ-lipid interactions at the cell membrane probably trigger the neurotoxic cascade in AD. Here, we overview the roles of specific lipids, lipid assemblies and apolipoprotein E in Aβ processing, clearance and aggregation, and discuss the contribution of these factors to the neurotoxicity in AD.

  13. Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

  14. A Novel Method for Diminishing Protein Aggregation during Denatuaration Process

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The addition of packing material for high performance hydrophobic interaction chrornatograghy (HPHIC) into the denaturant solution to prevent, or depress protein aggregation in the denatuaration process is presented. The renaturation of α-chymotrypsin (α-Chy)denatured with guanidine hydrochloride (GuHCl) solution indicated that renaturation efficiency can be enhanced from 36.1% to 59.0% by this new method. The structure of the ligand linking of HPHIC packings is also important for the protein renaturation.

  15. COIN Project: Towards a zero-waste technology for concrete aggregate production in Norway

    Science.gov (United States)

    Cepuritis, Rolands; Willy Danielsen, Svein

    2014-05-01

    for their crusher fines) providing only conclusions already well known by the engineers involved in concrete production. Due to the pressing situation with the left resources of the natural sand and gravel in Scandinavia, a new and different development approach has been recently attempted with the Concrete Innovation Center (COIN) in Norway. The centre is a research based innovation project that has brought together and served as a source of funding to facilitate the crucial interaction between the professionals from the different involved industries (quarrying machinery supplier, aggregate producers, concrete producers and concrete contractors) and the academic people from universities and research institutions, in order come up with a better crushed sand solution for the future. The concept under development has been a zero-waste technology for aggregate production, where instead of reducing the amount of the crushed fines their properties are rather engineered to crucially increase the overall performance of the sand in concrete. The project also involves collaboration with a state-of-the-art aggregate production plant where the new technology has already been implemented. The production process there is based on the new engineered sand concepts successfully supplying 100% all of the produced fractions to concrete and asphalt producers.

  16. VLSI signal processing technology

    CERN Document Server

    Swartzlander, Earl

    1994-01-01

    This book is the first in a set of forthcoming books focussed on state-of-the-art development in the VLSI Signal Processing area. It is a response to the tremendous research activities taking place in that field. These activities have been driven by two factors: the dramatic increase in demand for high speed signal processing, especially in consumer elec­ tronics, and the evolving microelectronic technologies. The available technology has always been one of the main factors in determining al­ gorithms, architectures, and design strategies to be followed. With every new technology, signal processing systems go through many changes in concepts, design methods, and implementation. The goal of this book is to introduce the reader to the main features of VLSI Signal Processing and the ongoing developments in this area. The focus of this book is on: • Current developments in Digital Signal Processing (DSP) pro­ cessors and architectures - several examples and case studies of existing DSP chips are discussed in...

  17. Gelation process visualized by aggregation-induced emission fluorogens

    Science.gov (United States)

    Wang, Zhengke; Nie, Jingyi; Qin, Wei; Hu, Qiaoling; Tang, Ben Zhong

    2016-06-01

    Alkaline-urea aqueous solvent system provides a novel and important approach for the utilization of polysaccharide. As one of the most important polysaccharide, chitosan can be well dissolved in this solvent system, and the resultant hydrogel material possesses unique and excellent properties. Thus the sound understanding of the gelation process is fundamentally important. However, current study of the gelation process is still limited due to the absence of direct observation and the lack of attention on the entire process. Here we show the entire gelation process of chitosan LiOH-urea aqueous system by aggregation-induced emission fluorescent imaging. Accompanied by other pseudo in situ investigations, we propose the mechanism of gelation process, focusing on the formation of junction points including hydrogen bonds and crystalline.

  18. Vaccine process technology.

    Science.gov (United States)

    Josefsberg, Jessica O; Buckland, Barry

    2012-06-01

    The evolution of vaccines (e.g., live attenuated, recombinant) and vaccine production methods (e.g., in ovo, cell culture) are intimately tied to each other. As vaccine technology has advanced, the methods to produce the vaccine have advanced and new vaccine opportunities have been created. These technologies will continue to evolve as we strive for safer and more immunogenic vaccines and as our understanding of biology improves. The evolution of vaccine process technology has occurred in parallel to the remarkable growth in the development of therapeutic proteins as products; therefore, recent vaccine innovations can leverage the progress made in the broader biotechnology industry. Numerous important legacy vaccines are still in use today despite their traditional manufacturing processes, with further development focusing on improving stability (e.g., novel excipients) and updating formulation (e.g., combination vaccines) and delivery methods (e.g., skin patches). Modern vaccine development is currently exploiting a wide array of novel technologies to create safer and more efficacious vaccines including: viral vectors produced in animal cells, virus-like particles produced in yeast or insect cells, polysaccharide conjugation to carrier proteins, DNA plasmids produced in E. coli, and therapeutic cancer vaccines created by in vitro activation of patient leukocytes. Purification advances (e.g., membrane adsorption, precipitation) are increasing efficiency, while innovative analytical methods (e.g., microsphere-based multiplex assays, RNA microarrays) are improving process understanding. Novel adjuvants such as monophosphoryl lipid A, which acts on antigen presenting cell toll-like receptors, are expanding the previously conservative list of widely accepted vaccine adjuvants. As in other areas of biotechnology, process characterization by sophisticated analysis is critical not only to improve yields, but also to determine the final product quality. From a regulatory

  19. Kinetic Behavior of Aggregation-Fragmentation Process with Annihilation

    Institute of Scientific and Technical Information of China (English)

    KE JianHong; LIN ZhenQuan

    2002-01-01

    The kinetic behavior of an aggregation-fragmentation-annihilation system with two distinct species is stead-ied. We propose that the aggregation reaction occurs only between two clusters of the same species, and the irreversibleannihilation reaction occurs only between two clusters of different species, meanwhile there exists the fragmentationreaction of a cluster into two smaller clusters for either species. Based on the mncan-field theory, we investigate therate equations of the process with constant reaction rates and obtain the asymptotic descriptions of the cluster-massdistribution. In the case of the same initial concentrations of two species, the scaling descriptions for the cluster-massdistributions of the two species are found to break down completely. It is also observed that the kinetic behaviors ofdistinct species are quite complicated for the case of different initial concentrations of the two species. Tile clusters oflarger initial concentration species (heavy species) possess peculiar scaling properties, while the cluster-mass distributionoflight species has not scaling behavior. The exponents describing the scaling behavior for heavy species strongly dependon its fragmentation rate and initial monomer concentrations of two kinds of reactants.

  20. Particle processing technology

    Science.gov (United States)

    Yoshio, Sakka

    2014-02-01

    In recent years, there has been strong demand for the development of novel devices and equipment that support advanced industries including IT/semiconductors, the environment, energy and aerospace along with the achievement of higher efficiency and reduced environmental impact. Many studies have been conducted on the fabrication of innovative inorganic materials with novel individual properties and/or multifunctional properties including electrical, dielectric, thermal, optical, chemical and mechanical properties through the development of particle processing. The fundamental technologies that are key to realizing such materials are (i) the synthesis of nanoparticles with uniform composition and controlled crystallite size, (ii) the arrangement/assembly and controlled dispersion of nanoparticles with controlled particle size, (iii) the precise structural control at all levels from micrometer to nanometer order and (iv) the nanostructural design based on theoretical/experimental studies of the correlation between the local structure and the functions of interest. In particular, it is now understood that the application of an external stimulus, such as magnetic energy, electrical energy and/or stress, to a reaction field is effective in realizing advanced particle processing [1-3]. This special issue comprises 12 papers including three review papers. Among them, seven papers are concerned with phosphor particles, such as silicon, metals, Si3N4-related nitrides, rare-earth oxides, garnet oxides, rare-earth sulfur oxides and rare-earth hydroxides. In these papers, the effects of particle size, morphology, dispersion, surface states, dopant concentration and other factors on the optical properties of phosphor particles and their applications are discussed. These nanoparticles are classified as zero-dimensional materials. Carbon nanotubes (CNT) and graphene are well-known one-dimensional (1D) and two-dimensional (2D) materials, respectively. This special issue also

  1. Optimizing Feature Construction Process for Dynamic Aggregation of Relational Attributes

    Directory of Open Access Journals (Sweden)

    Rayner Alfred

    2009-01-01

    Full Text Available Problem statement: The importance of input representation has been recognized already in machine learning. Feature construction is one of the methods used to generate relevant features for learning data. This study addressed the question whether or not the descriptive accuracy of the DARA algorithm benefits from the feature construction process. In other words, this paper discusses the application of genetic algorithm to optimize the feature construction process to generate input data for the data summarization method called Dynamic Aggregation of Relational Attributes (DARA. Approach: The DARA algorithm was designed to summarize data stored in the non-target tables by clustering them into groups, where multiple records stored in non-target tables correspond to a single record stored in a target table. Here, feature construction methods are applied in order to improve the descriptive accuracy of the DARA algorithm. Since, the study addressed the question whether or not the descriptive accuracy of the DARA algorithm benefits from the feature construction process, the involved task includes solving the problem of constructing a relevant set of features for the DARA algorithm by using a genetic-based algorithm. Results: It is shown in the experimental results that the quality of summarized data is directly influenced by the methods used to create patterns that represent records in the (n×p TF-IDF weighted frequency matrix. The results of the evaluation of the genetic-based feature construction algorithm showed that the data summarization results can be improved by constructing features by using the Cluster Entropy (CE genetic-based feature construction algorithm. Conclusion: This study showed that the data summarization results can be improved by constructing features by using the cluster entropy genetic-based feature construction algorithm.

  2. Simulation on the aggregation process of spherical particle confined in a spherical shell

    Science.gov (United States)

    Wang, J.; Xu, J. J.; Zhang, L.

    2016-04-01

    The aggregation process of spherical particles confined in a spherical shell was studied by using a diffusion-limited cluster-cluster aggregation (DLCA) model. The influence of geometrical confinement and wetting-like properties of the spherical shell walls on the particle concentration profile, aggregate structure and aggregation kinetics had been explored. The results show that there will be either depletion or absorption particles near the shell walls depending on the wall properties. It is observed that there are four different types of density distribution which can be realized by modifying the property of the inner or outer spherical shell wall. In addition, the aggregate structure will become more compact in the confined spherical shell comparing to bulk system with the same particle volume fraction. The analysis on the aggregation kinetics indicates that geometrical confinement will promote the aggregation process by reducing the invalid movement of the small aggregates and by constraining the movement of those large aggregates. Due to the concave geometrical characteristic of the outer wall of the spherical shell, its effects on the aggregating kinetics and the structure of the formed aggregates are more evident than those of the inner wall. This study will provide some instructive information of controlling the density distribution of low-density porous polymer hollow spherical shells and helps to predict gel structures developed in confined geometries.

  3. Fundamentals of semiconductor processing technology

    CERN Document Server

    El-Kareh, Badih

    1995-01-01

    The drive toward new semiconductor technologies is intricately related to market demands for cheaper, smaller, faster, and more reliable circuits with lower power consumption. The development of new processing tools and technologies is aimed at optimizing one or more of these requirements. This goal can, however, only be achieved by a concerted effort between scientists, engineers, technicians, and operators in research, development, and manufac­ turing. It is therefore important that experts in specific disciplines, such as device and circuit design, understand the principle, capabil­ ities, and limitations of tools and processing technologies. It is also important that those working on specific unit processes, such as lithography or hot processes, be familiar with other unit processes used to manufacture the product. Several excellent books have been published on the subject of process technologies. These texts, however, cover subjects in too much detail, or do not cover topics important to modem tech­ n...

  4. An online detection system for aggregate sizes and shapes based on digital image processing

    Science.gov (United States)

    Yang, Jianhong; Chen, Sijia

    2016-07-01

    Traditional aggregate size measuring methods are time-consuming, taxing, and do not deliver online measurements. A new online detection system for determining aggregate size and shape based on a digital camera with a charge-coupled device, and subsequent digital image processing, have been developed to overcome these problems. The system captures images of aggregates while falling and flat lying. Using these data, the particle size and shape distribution can be obtained in real time. Here, we calibrate this method using standard globules. Our experiments show that the maximum particle size distribution error was only 3 wt%, while the maximum particle shape distribution error was only 2 wt% for data derived from falling aggregates, having good dispersion. In contrast, the data for flat-lying aggregates had a maximum particle size distribution error of 12 wt%, and a maximum particle shape distribution error of 10 wt%; their accuracy was clearly lower than for falling aggregates. However, they performed well for single-graded aggregates, and did not require a dispersion device. Our system is low-cost and easy to install. It can successfully achieve online detection of aggregate size and shape with good reliability, and it has great potential for aggregate quality assurance.

  5. Patterning processes in aggregates of Hydra cells visualized with the monoclonal antibody, TS19.

    Science.gov (United States)

    Sato, M; Bode, H R; Sawada, Y

    1990-10-01

    The monoclonal antibody, TS19, (Heimfeld et al., 1985), labels the apical surface of ectodermal epithelial cells of tentacles and lower peduncles in Hydra. To investigate the patterning process in a tissue whose original pattern was completely destroyed, the TS19 staining pattern was examined in developing aggregates of Hydra cells. Two types of aggregates were prepared. G-aggregates were made from tissue of the gastric portion of animals and RG-aggregates from gastric tissue allowed to regenerate for 24 hr before making aggregates. G-aggregates were initially TS19-negative, and later dim and uniformly TS19-positive. Thereafter, TS19 staining broke up into brightly stained and unstained regions. The brightly staining regions developed into head or foot structures. The TS19 pattern in RG-aggregates developed differently. Since the initial aggregates contained cells of regenerating tips, they started with TS19-positive cells as well as TS19-negative cells. The numbers of brightly staining TS19-positive cells increased with time. Some patches of these cells developed into head or foot structures, while others did not. These results and a simulation using a reaction-diffusion model suggest that the changes in activation levels affected the temporal changes in the pattern of TS19 staining, and that the de novo pattern formation in hydra can be explained in terms of a process involving activation and inhibition properties.

  6. The Influence of Crushed Concrete Demolition Waste Aggregates on the Hardening Process of Concrete Mixtures

    Directory of Open Access Journals (Sweden)

    Olga FINOŽENOK

    2013-03-01

    Full Text Available Concrete – complex structure composite material consisting of the components with various structure and size. Not only coarse and fine aggregates are used in concrete production, but also filler aggregates. Aggregates of natural, man-made origin or aggregates, produced from recycled materials, can be utilised in concrete production. Aggregates can be produced from recycled materials by reprocessing of concrete and reinforced concrete waste. The influence of the filler aggregates produced from the crushed concrete waste on the characteristics of binder’s paste, when part of the binder (5; 10; 15; 20; 25; 30 % is replaced by such filler aggregate, is analysed in the research. Concrete mixtures with natural aggregates and crushed concrete waste were selected and concrete mixtures of required consistence were produced during the research. Exothermic reactions take place during the hardening of concrete mixture, at that time the heat is dissipated, which increases the temperature of the concrete sample. Thus the exothermic processes were investigated during the concrete’s mixture hardening period and the temperatures of exothermic reactions were determined.DOI: http://dx.doi.org/10.5755/j01.ms.19.1.3833

  7. Distillation process using microchannel technology

    Science.gov (United States)

    Tonkovich, Anna Lee; Simmons, Wayne W.; Silva, Laura J.; Qiu, Dongming; Perry, Steven T.; Yuschak, Thomas; Hickey, Thomas P.; Arora, Ravi; Smith, Amanda; Litt, Robert Dwayne; Neagle, Paul

    2009-11-03

    The disclosed invention relates to a distillation process for separating two or more components having different volatilities from a liquid mixture containing the components. The process employs microchannel technology for effecting the distillation and is particularly suitable for conducting difficult separations, such as the separation of ethane from ethylene, wherein the individual components are characterized by having volatilities that are very close to one another.

  8. Aggregation processes with catalysis-driven monomer birth/death

    Institute of Scientific and Technical Information of China (English)

    Chen Yu; Han An-Jia; Ke Jian-Hong; Lin Zhen-Quan

    2006-01-01

    We propose two solvable cluster growth models, in which an irreversible aggregation spontaneously occurs between any two clusters of the same species; meanwhile, monomer birth or death of species A occurs with the help of species B. The system with the size-dependent monomer birth/death rate kernel K(i,j) = Jijv is then investigated by means of the mean-field rate equation. The results show that the kinetic scaling behaviour of species A depends crucially on the value of the index v. For the model with catalysis-driven monomer birth, the cluster-mass distribution of species A obeys the conventional scaling law in the v ≤ 0 case, while it satisfies a generalized scaling form in the v>0 case; moreover, the total mass of species A is a nonzero value in the v< 0 case while it grows continuously with time in the v>0 case. For the model with catalysis-driven monomer death, the cluster-mass distribution also approaches the conventional scaling form in the v < 0 case, while the conventional scaling description of the system breaks down in the v ≥ 0 case. Additionally, the total mass of species A retains a nonzero quantity in the v <0 case, but it decreases to zero with time in the v ≥ 0 case.

  9. Aggregation process of paramagnetic particles in fluid in the magnetic field.

    Science.gov (United States)

    Pei, Ning; Cheng, Xiaoye; Huang, Zheyong; Wang, Xiang; Yang, Kai; Wang, Ye; Gong, Yongyong

    2016-07-01

    Magnetic targeting is a promising therapeutic strategy for localizing systemically delivered magnetic responsive drugs or cells to target tissue, but excessive aggregation of magnetic particles could result in vascular embolization. To analyze the reason for embolization, the attractive process of magnetic particles in magnetic field (MF) was studied in this paper by analyzing the form of the aggregated paramagnetic particles while the particle suspension flowed through a tube, which served as a model of blood vessels. The effects of magnetic flux density and fluid velocity on the formation of aggregated paramagnetic particles were investigated. The number of large aggregated clusters dramatically increased with increment in the magnetic flux density and decreased with increment in the fluid velocity. The analysis of accumulative process demonstrates the MF around initially attracted particles was focused, which induced the formation of clusters and increased the possibility of embolism. Bioelectromagnetics. 37:323-330, 2016. © 2016 Wiley Periodicals, Inc.

  10. Technology development life cycle processes.

    Energy Technology Data Exchange (ETDEWEB)

    Beck, David Franklin

    2013-05-01

    This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81 of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.

  11. Cross-Border Flows of People, Technology Diffusion and Aggregate Productivity

    DEFF Research Database (Denmark)

    Dalgaard, Carl-Johan Lars; Andersen, Thomas Barnebeck

    A number of empirical studies have investigated the hypothesis that cross-border flows of goods (international trade) and capital (FDI) lead to international technology diffusion. The contribution of the present paper consists in examining an as yet neglected vehicle for technology diffusion: cro......-border flows of people. We find that increasing the intensity of international travel, for the purpose of business and otherwise, by 1% increases the level of aggregate total factor productivity and GDP per worker by roughly 0.2%....

  12. The natural silk spinning process. A nucleation-dependent aggregation mechanism?

    Science.gov (United States)

    Li, G; Zhou, P; Shao, Z; Xie, X; Chen, X; Wang, H; Chunyu, L; Yu, T

    2001-12-01

    The spinning mechanism of natural silk has been an open issue. In this study, both the conformation transition from random coil to beta sheet and the beta sheet aggregation growth of silk fibroin are identified in the B. mori regenerated silk fibroin aqueous solution by circular dichroism (CD) spectroscopy. A nucleation-dependent aggregation mechanism, similar to that found in prion protein, amyloid beta (Abeta) protein, and alpha-synuclein protein with the conformation transition from a soluble protein to a neurotoxic, insoluble beta sheet containing aggregate, is a novel suggestion for the silk spinning process. We present evidence that two steps are involved in this mechanism: (a) nucleation, a rate-limiting step involving the conversion of the soluble random coil to insoluble beta sheet and subsequently a series of thermodynamically unfavorable association of beta sheet unit, i.e. the formation of a nucleus or seed; (b) once the nucleus forms, further growth of the beta sheet unit becomes thermodynamically favorable, resulting a rapid extension of beta sheet aggregation. The aggregation growth follows a first order kinetic process with respect to the random coil fibroin concentration. The increase of temperature accelerates the beta sheet aggregation growth if the beta sheet seed is introduced into the random coil fibroin solution. This work enhances our understanding of the natural silk spinning process in vivo.

  13. Gelation process visualized by aggregation-induced emission fluorogens

    OpenAIRE

    Wang, Zhengke; Nie, Jingyi; Qin, Wei; Hu, Qiaoling; Tang, Ben Zhong

    2016-01-01

    Alkaline-urea aqueous solvent system provides a novel and important approach for the utilization of polysaccharide. As one of the most important polysaccharide, chitosan can be well dissolved in this solvent system, and the resultant hydrogel material possesses unique and excellent properties. Thus the sound understanding of the gelation process is fundamentally important. However, current study of the gelation process is still limited due to the absence of direct observation and the lack of ...

  14. Kinetic behaviour of two-species-group aggregation process with complete annihilation

    Institute of Scientific and Technical Information of China (English)

    柯见洪; 林振权; 王向红

    2003-01-01

    We propose a two-species-group aggregation-annihilation model in which an irreversible aggregation reaction occurs between any two clusters of the same species, and an irreversible joint annihilation reaction occurs between two distinct species groups. Based on the mean-field theory, we have investigated the rate equations of the process with constant reaction rates to obtain the asymptotic descriptions of the cluster-mass distributions. The results indicate that for the symmetrical initial cases the kinetic behaviour of the system depends crucially on the ratio of the equivalent aggregation rate to the annihilation rate. The cluster-mass distribution of each species always obeys a conventional or modified scaling law in each individual case. Moreover, all the species cannot finally survive except for the cases in which at least one equivalent aggregation rate is less than twice the annihilation rate.

  15. Temporal aggregation in a periodically integrated autoregressive process

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans); H.P. Boswijk (Peter)

    1996-01-01

    textabstractA periodically integrated autoregressive process for a time series which is observed S times per year assumes the presence of S - 1 cointegration relations between the annual series containing the seasonal observations, with the additional feature that these relations are different acros

  16. Cache-Based Aggregate Query Shipping: An Efficient Scheme of Distributed OLAP Query Processing

    Institute of Scientific and Technical Information of China (English)

    Hua-Ming Liao; Guo-Shun Pei

    2008-01-01

    Our study introduces a novel distributed query plan refinement phase in an enhanced architecture of distributed query processing engine (DQPE). Query plan refinement generates potentially efficient distributed query plan by reusable aggregate query shipping (RAQS) approach. The approach improves response time at the cost of pre-processing time. If theoverheads could not be compensated by query results reusage, RAQS is no more favorable. Therefore a global cost estimation model is employed to get proper operators: RR_Agg, R_Agg, or R_Scan. For the purpose of reusing results of queries with aggregate function in distributed query processing, a multi-level hybrid view caching (HVC) scheme is introduced. The scheme retains the advantages of partial match and aggregate query results caching. By our solution, evaluations with distributed TPC-H queries show significant improvement on average response time.

  17. In-cell aggregation of a polyglutamine-containing chimera is a multistep process initiated by the flanking sequence.

    Science.gov (United States)

    Ignatova, Zoya; Thakur, Ashwani K; Wetzel, Ronald; Gierasch, Lila M

    2007-12-14

    Toxicity in amyloid diseases is intimately linked to the nature of aggregates, with early oligomeric species believed to be more cytotoxic than later fibrillar aggregates. Yet mechanistic understanding of how aggregating species evolve with time is currently lacking. We have explored the aggregation process of a chimera composed of a globular protein (cellular retinoic acid-binding protein, CRABP) and huntingtin exon 1 with polyglutamine tracts either above (Q53) or below (Q20) the pathological threshold using Escherichia coli cells as a model intracellular environment. Previously we showed that fusion of the huntingtin exon 1 sequence with >40Q led to structural perturbation and decreased stability of CRABP (Ignatova, Z., and Gierasch, L. M. (2006) J. Biol. Chem. 281, 12959-12967). Here we report that the Q53 chimera aggregates in cells via a multistep process: early stage aggregates are spherical and detergent-soluble, characteristics of prefibrillar aggregates, and appear to be dominated structurally by CRABP, in that they can promote aggregation of a CRABP variant but not oligoglutamine aggregation, and the CRABP domain is relatively sequestered based on its protection from proteolysis. Late stage aggregates appear to be dominated by polyGln; they are fibrillar, detergent-resistant, capable of seeding aggregation of oligoglutamine but not the CRABP variant, and show relative protection of the polyglutamine-exon1 domain from proteolysis. These results point to an evolution of the dominant sequences in intracellular aggregates and may provide molecular insight into origins of toxic prefibrillar aggregates.

  18. 76 FR 30696 - Technology Evaluation Process

    Science.gov (United States)

    2011-05-26

    .... Department of Energy, Building Technologies Program, Mailstop EE-2J, Revisions to Energy Efficiency... Energy Efficiency and ] Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue... of Energy Efficiency and Renewable Energy Technology Evaluation Process AGENCY: Office of...

  19. Particle-bubble aggregate stability on static bubble generated by single nozzle on flotation process

    Science.gov (United States)

    Warjito, Harinaldi, Setyantono, Manus; Siregar, Sahala D.

    2016-06-01

    There are three sub-processes on flotation. These processes are intervening liquid film into critical thickness, rupture of liquid film forming three phase contact line, and expansion three phase contact line forming aggregate stability. Aggregate stability factor contribute to determine flotation efficiency. Aggregate stability has some important factors such as reagent and particle geometry. This research focussed on to understand effect of particle geometry to aggregate stability. Experimental setup consists of 9 x 9 x26 cm flotation column made of glass, bubble generator, particle feeding system, and high speed video camera. Bubble generator made from single nozzle with 0.3 mm diameter attached to programmable syringe pump. Particle feeding system made of pipette. Particle used in this research is taken from open pit Grasberg in Timika, Papua. Particle has sub-angular geometry and its size varies from 38 to 300 µm. Bubble-particle interaction are recorded using high speed video camera. Recordings from high speed video camera analyzed using image processing software. Experiment result shows that aggregate particle-bubble and induction time depends on particle size. Small particle (38-106 µm) has long induction time and able to rupture liquid film and also forming three phase contact line. Big particle (150-300 µm) has short induction time, so it unable to attach with bubble easily. This phenomenon is caused by apparent gravity work on particle-bubble interaction. Apparent gravity worked during particle sliding on bubble surface experience increase and reached its maximum magnitude at bubble equator. After particle passed bubble equator, apparent gravity force experience decrease. In conclusion particle size from 38-300 µm can form stable aggregate if particle attached with bubble in certain condition.

  20. SYNTHESIS AND FLUORESCENCE STUDY OF SELF—AGGREGATION PROCESS IN AQUEOUS SOLUTION OF HYDROPHOBILIZED POLYSACCHARIDE

    Institute of Scientific and Technical Information of China (English)

    CAONingning; YUYaoting; 等

    2000-01-01

    Cholesterol modified dextran(CHD) having self-aggrgation or self-assembly property was synthesized from cholesterol and 1,6-hexyldiisocyanate.The degree of substitution of cholesteryl moiety in dextran main line is 3-5 cholesterols the 100 glucose units.We have prepared water solution of CHD using probe type sonifier and N-Phenyl-a-naphthylamine(PNA) as a fluorescent probe to study CHD self-aggregate process.For each solution of two samples,we found that the maximum emission of PNA in CHD concentration.This change corresponds to the formation of micelle-like clusters self-aggregated by the cholesterol moiety once the CHD concentration.This change corresponds to the formation of micelle-like clusters self-aggregated by the cholesterol moiety once the CHD concentration exceeds 0.01mg/ml.

  1. Management of Technology - a political process approach

    DEFF Research Database (Denmark)

    Koch, Christian

    1999-01-01

    Most management of technology writings fail to address enterprise developments as political processes, where visions, coalitions and emergence are central features. The paper report of a participants observation study of management of technology processes.......Most management of technology writings fail to address enterprise developments as political processes, where visions, coalitions and emergence are central features. The paper report of a participants observation study of management of technology processes....

  2. Investigation into process-induced de-aggregation of cohesive micronised API particles.

    Science.gov (United States)

    Hoffmann, Magnus; Wray, Patrick S; Gamble, John F; Tobyn, Mike

    2015-09-30

    The aim of this study was to assess the impact of unit processes on the de-aggregation of a cohesive micronised API within a pharmaceutical formulation using near-infrared chemical imaging. The impact on the primary API particles was also investigated using an image-based particle characterization system with integrated Raman analysis. The blended material was shown to contain large, API rich domains which were distributed in-homogeneously across the sample, suggesting that the blending process was not aggressive enough to disperse aggregates of micronised drug particles. Cone milling, routinely used to improve the homogeneity of such cohesive formulations, was observed to substantially reduce the number and size of API rich domains; however, several smaller API domains survived the milling process. Conveyance of the cone milled formulation through the Alexanderwerk WP120 powder feed system completely dispersed all remaining aggregates. Importantly, powder feed transmission of the un-milled formulation was observed to produce an equally homogeneous API distribution. The size of the micronised primary drug particles remained unchanged during powder feed transmission. These findings provide further evidence that this powder feed system does induce shear, and is in fact better able to disperse aggregates of a cohesive micronised API within a blend than the blend-mill-blend step.

  3. Atomic Aggregation Processes in the Early Stages of Pt/Pt(111) Growth

    Institute of Scientific and Technical Information of China (English)

    ZHUANG Guo-Ce; ZHU Xiao-Bin; WANG Wei

    2000-01-01

    The atomic aggregation processes in the early stages of Pt/Pt(111) growth are studied by using kinetic Monte Carlo simulations. Our results show that the average neighbor coordination number of the atoms in a cluster is a function of temperature, agreeing well with the experiment observations of scanning tunneling microscopy. The influence of diffusion barriers of various atomic processes on the morphology of islands is also studied. Different morphologies of the islands (dendritic, fractal, or compact islands) are found.

  4. Heparin promotes suspension adaptation process of CHO-TS28 cells by eliminating cell aggregation.

    Science.gov (United States)

    Li, Ling; Qin, Jun; Feng, Qiang; Tang, Hao; Liu, Rong; Xu, Liqing; Chen, Zhinan

    2011-01-01

    While heparin has been shown to eliminate cell aggregation in suspension adaptations of insect and HEK293 cells for virus-based cell cultures, the role of heparin in long period serum-free suspension adaptation of the anchorage-dependent Chinese hamster ovary (CHO) cell lines remains inconclusive. In this paper, we explore the potential application of heparin in suspension adaptation of CHO cell line which produces an anti-human chimeric antibody cHAb18. Heparin showed a concentration-dependent inhibition of CHO-TS28 cell-to-cell adhesion, with a significant inhibitory effect occurring when the concentration exceeded 250 μg/ml (P cell aggregation elimination role at all concentrations (P cell growth and antibody secretion, with the highest cell density ((99.83 ± 12.21) × 10(4) cells/ml, P = 0.034) and maximum antibody yield ((9.46 ± 0.94) mg/l, P cell aggregates were effectively dispersed by 250 μg/ml heparin and a single-cell suspension culture process was promoted. In suspension adapted CHO-TS28 cells, cell growth rates and specific antibody productivity were maintained; while antigen-binding activity improved slightly. Together, our results show that heparin may promote suspension adaptation of anchorage-depended CHO cells by resisting cell aggregation without reducing cell growth, antibody secretion, and antigen-binding activity.

  5. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    OG21 (www.OG21.org) Norway's official technology strategy for the petroleum sector issued a revised strategy document in November 2005 (new strategy planned in 2009). In this document 'Subsea processing and transport' was identified as one of the eight new technology target areas (TTAs). The overall OG21 strategy document is on an aggregated level, and therefore the Board of OG21 decided that a sub-strategy for each TTA was needed. This document proposes the sub-strategy for the technology target area 'Subsea processing and transport' which covers the technology and competence necessary to effectively transport well stream to a platform or to onshore facilities. This includes multiphase flow modelling, flow assurance challenges to avoid problems with hydrates, asphaltenes and wax, subsea or downhole fluid conditioning including bulk water removal, and optionally complete water removal, and sand handling. It also covers technologies to increase recovery by pressure boosting from subsea pumping and/or subsea compression. Finally it covers technologies to facilitate subsea processing such as control systems and power supply. The vision of the Subsea processing and transport TTA is: Norway is to be the leading international knowledge- and technology cluster in subsea processing and transport: Sustain increased recovery and accelerated production on the NCS by applying subsea processing and efficient transport solutions; Enable >500 km gas/condensate multiphase well stream transport; Enable >200 km oil-dominated multiphase well stream transport; Enable well stream transport of complex fluids; Enable subsea separation, boosting compression, and water injection; Enable deepwater developments; Enable environmentally friendly and energy efficient field development. Increase the export of subsea processing and transport technology: Optimize technology from the NCS for application worldwide; Develop new technology that can meet the challenges found in

  6. Perspectives on Multienzyme Process Technology

    DEFF Research Database (Denmark)

    Santacoloma, Paloma A.; Woodley, John M.

    2014-01-01

    There is little doubt that chemical processing of the future will involve an increasing number of biocatalytic processes using more than one enzyme. There are good reasons for developing such innovative biocatalytic processes and interesting new biocatalyst and process options will be introduced....

  7. Logically Sensing Aggregate Process and Discriminating SDS from Other Surfactants with the Assistance of BSA

    Institute of Scientific and Technical Information of China (English)

    钱俊红; 徐玉芳; 钱旭红

    2012-01-01

    An amphiphilic fluorescent probe, 3-dodecylamino dihydrogen imidazo[2,l-a]benz[de]isoquinolin-7-one (compound 3), was used to sense the aggregate formation process of bovine serum albumine (BSA), sodium dode- cyl sulfate (SDS) and their mixed system. The fluorescence intensity of 3 was significantly affected by the adding order of SDS and BSA, and SDS can be distinguished from other surfactants with the aid of BSA, but only when 3 is allowed to interact with BSA first. The results revealed that compound 3 is preferentially sited in the hydrophobic region of BSA, and thermodynamically in SDS-BSA mixed aggregate. Sodium phosphate buffer solution (PBS) and BSA played important but distinct roles in distinguishing SDS micelle from the others.

  8. Microemulsions and Aggregation Formation in Extraction Processes for Used Nuclear Fuel: Thermodynamic and Structural Studies

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Mikael [Univ. of California, Irvine, CA (United States)

    2016-05-04

    Advanced nuclear fuel cycles rely on successful chemical separation of various elements in the used fuel. Numerous solvent extraction (SX) processes have been developed for the recovery and purification of metal ions from this used material. However, the predictability of process operations has been challenged by the lack of a fundamental understanding of the chemical interactions in several of these separation systems. For example, gaps in the thermodynamic description of the mechanism and the complexes formed will make predictions very challenging. Recent studies of certain extraction systems under development and a number of more established SX processes have suggested that aggregate formation in the organic phase results in a transformation of its selectivity and efficiency. Aggregation phenomena have consistently been interfering in SX process development, and have, over the years, become synonymous with an undesirable effect that must be prevented. This multiyear, multicollaborative research effort was carried out to study solvation and self-organization in non-aqueous solutions at conditions promoting aggregation phenomena. Our approach to this challenging topic was to investigate extraction systems comprising more than one extraction reagent where synergy of the metal ion could be observed. These systems were probed for the existence of stable microemulsions in the organic phase, and a number of high-end characterization tools were employed to elucidate the role of the aggregates in metal ion extraction. The ultimate goal was to find connections between synergy of metal ion extraction and reverse micellar formation. Our main accomplishment for this project was the expansion of the understanding of metal ion complexation in the extraction system combining tributyl phosphate (TBP) and dibutyl phosphoric acid (HDBP). We have found that for this system no direct correlation exists for the metal ion extraction and the formation of aggregates, meaning that the

  9. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    .... Department of Energy, Building Technologies Program, Mailstop EE-2J, Revisions to Energy Efficiency... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue... Office of Energy Efficiency and Renewable Energy Technology Evaluation Process AGENCY: Office of...

  10. The Kinetic and Equilibrium Cluster Size Distributions of Finite Bond Aggregation Processes

    Science.gov (United States)

    Sherman, Derin Andrew

    Aggregation is a phenomenon central to many natural and synthetic processes. In this thesis, I explore in detail the phenomenon of antibody-induced colloidal aggregation. I use a new and novel system composed of highly charged uniform polystyrene microspheres to which antigens are covalently coupled. Bivalent antibodies in solution bind to the antigens on the spheres' surfaces and crosslink the spheres causing them to aggregate. As such, the bonds which form between the spheres are discrete and rigid. Using a single particle light scattering instrument developed in the Cohen laboratory, I have measured the temporal evolution of the cluster size distribution for the system of spheres and antibodies. The results show that the cluster size distribution exhibits dynamic scaling. Although antigen coated colloidal spheres have been used extensively in the past, the system I use is unique in that the bonds which form between the antibodies and the spheres are fragile making the aggregation process thermodynamically reversible. This effect causes the system to reach equilibrium in a finite amount of time. The classical theory which predicts the equilibrium cluster size distribution for a variety of aggregating systems is known as Flory -Stockmayer theory. Since each monomer possesses several antibodies and several antigens,m the colloidal system is expected to obey the statistics for the Flory A _{f}RB_{g} model where f,ggg 1. In Flory's model, the system is expected to gel. However, I see no evidence of gelation. I am able to resolve this discrepancy using the ideas of Ball and colleagues. I have also developed the theory by which this system may be used to measure the binding affinity between antibodies and antigens. I have used the light scattering instrument to measure the binding affinity between a monoclonal antibody and a number of different antigens covering a large range of binding affinities. I have demonstrated that the instrument is capable of detecting small

  11. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  12. Role of the disaggregase ClpB in processing of proteins aggregated as inclusion bodies.

    Science.gov (United States)

    Zblewska, Kamila; Krajewska, Joanna; Zolkiewski, Michal; Kędzierska-Mieszkowska, Sabina

    2014-08-01

    Overproduction of heterologous proteins in bacterial systems often results in the formation of insoluble inclusion bodies (IBs), which is a major impediment in biochemical research and biotechnology. In principle, the activity of molecular chaperones could be employed to gain control over the IB formation and to improve the recombinant protein yields, but the potential of each of the major bacterial chaperones (DnaK/J, GroEL/ES, and ClpB) to process IBs has not been fully established yet. We investigated the formation of inclusion bodies (IBs) of two aggregation-prone proteins, VP1LAC and VP1GFP, overproduced in Escherichiacoli in the presence and absence of the chaperone ClpB. We found that both ClpB isoforms, ClpB95 and ClpB80 accumulated in E. coli cells during the production of IBs. The amount of IB proteins increased in the absence of ClpB. ClpB supported the resolubilization and reactivation of the aggregated VP1LAC and VP1GFP in E. coli cells. The IB disaggregation was optimal in the presence of both ClpB95 and ClpB80. Our results indicate an essential role of ClpB in controlling protein aggregation and inclusion body formation in bacteria.

  13. Aggregation and sampling in deterministic chaos: implications for chaos identification in hydrological processes

    Directory of Open Access Journals (Sweden)

    J. D. Salas

    2005-01-01

    Full Text Available A review of the literature reveals conflicting results regarding the existence and inherent nature of chaos in hydrological processes such as precipitation and streamflow, i.e. whether they are low dimensional chaotic or stochastic. This issue is examined further in this paper, particularly the effect that certain types of transformations, such as aggregation and sampling, may have on the identification of the dynamics of the underlying system. First, we investigate the dynamics of daily streamflows for two rivers in Florida, one with strong surface and groundwater storage contributions and the other with a lesser basin storage contribution. Based on estimates of the delay time, the delay time window, and the correlation integral, our results suggest that the river with the stronger basin storage contribution departs significantly from the behavior of a chaotic system, while the departure is less significant for the river with the smaller basin storage contribution. We pose the hypothesis that the chaotic behavior depicted on continuous precipitation fields or small time-step precipitation series becomes less identifiable as the aggregation (or sampling time step increases. Similarly, because streamflows result from a complex transformation of precipitation that involves accumulating and routing excess rainfall throughout the basin and adding surface and groundwater flows, the end result may be that streamflows at the outlet of the basin depart from low dimensional chaotic behavior. We also investigate the effect of aggregation and sampling using series derived from the Lorenz equations and show that, as the aggregation and sampling scales increase, the chaotic behavior deteriorates and eventually ceases to show evidence of low dimensional determinism.

  14. Theoretical study of nanoparticle formation in thermal plasma processing: Nucleation, coagulation and aggregation

    Science.gov (United States)

    Mendoza Gonzalez, Norma Yadira

    This work presents a mathematical modeling study of the synthesis of nanoparticles in radio frequency (RF) inductively coupled plasma (ICP) reactors. The purpose is to further investigate the influence of process parameters on the final size and morphology of produced particles. The proposed model involves the calculation of flow and temperature fields of the plasma gas. Evaporation of raw particles is also accounted with the particle trajectory and temperature history calculated with a Lagrangian approach. The nanoparticle formation is considered by homogeneous nucleation and the growth is caused by condensation and Brownian coagulation. The growth of fractal aggregates is considered by introducing a power law exponent Df. Transport of nanoparticles occurs by convection, thermophoresis and Brownian diffusion. The method of moments is used to solve the particle dynamics equation. The model is validated using experimental results from plasma reactors at laboratory scale. The results are presented in the following manner. First, use is made of the computational fluid dynamics software (CFD), Fluent 6.1 with a commercial companion package specifically developped for aerosols named: Fine Particle Model (FPM). This package is used to study the relationship between the operating parameters effect and the properties of the end products at the laboratory scale. Secondly, a coupled hybrid model for the synthesis of spherical particles and fractal aggregates is developped in place of the FPM package. Results obtained from this model will allow to identify the importance of each parameter in defining the morphology of spherical primary particles and fractal aggregates of nanoparticles. The solution of the model was made using the geometries and operating conditions of existing reactors at the Centre de Recherche en Energie, Plasma et Electrochimie (CREPE) of the Universite de Sherbrooke, for which experimental results were obtained experimentally. Additionally, this study

  15. Mineral processing and characterization of coal waste to be used as fine aggregates for concrete paving blocks

    Directory of Open Access Journals (Sweden)

    C. R. Santos

    Full Text Available Commercial coal production in the southern region of Brazil has been occurring since the beginning of the twentieth century. Due to the geological characteristics of the region, large amounts of solid wastes are generated. The aim of this work was to evaluate the use of coal waste to produce concrete paving blocks. A procedure to process the coal waste with the purpose of reducing the sulfur content and changing the particle size distribution of the material to meet the specification of fine aggregates was developed. The methodology considered the following steps: (a sampling of a coal mining waste; (b gravity separation of the fraction with specific gravity between 2.4 and 2.8; (c comminution of the material and particle size analysis; (d technological characterization of the material and production of concrete paving blocks; and (e acidity generation prediction (environmental feasibility. The results showed that the coal waste considered in this work can be used to replace conventional sand as a fine aggregate for concrete paving blocks in a proportion of up to 50%. This practice can result in cleaner coal production and reduce the demand for exploitation of sand deposits.

  16. Radioactive Dry Process Material Treatment Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. J.; Hung, I. H.; Kim, K. K. (and others)

    2007-06-15

    The project 'Radioactive Dry Process Material Treatment Technology Development' aims to be normal operation for the experiments at DUPIC fuel development facility (DFDF) and safe operation of the facility through the technology developments such as remote operation, maintenance and pair of the facility, treatment of various high level process wastes and trapping of volatile process gases. DUPIC Fuel Development Facility (DFDF) can accommodate highly active nuclear materials, and now it is for fabrication of the oxide fuel by dry process characterizing the proliferation resistance. During the second stage from march 2005 to February 2007, we carried out technology development of the remote maintenance and the DFDF's safe operation, development of treatment technology for process off-gas, and development of treatment technology for PWR cladding hull and the results was described in this report.

  17. Beam Technologies for Integrated Processing

    Science.gov (United States)

    1992-03-01

    Ta20 5 Refractory Nitrides (e.g., NbN) X,++ N,+ (7.5) Nb X.+ N2 Other materials Lead Pb,Zr,Ti Ar + 02 zirconium oxide ceramic titanate (PZT) Ar4 (2.0... nanosize powders similar to other powder forming processes, which subsequently can be incorporated into a fully integrated process. A potentially important...and reactive evaporation (RE) processes to aid in the deposition of more refractory materials such as nitrides, carbides, and high-temperature oxides

  18. Separation process using microchannel technology

    Science.gov (United States)

    Tonkovich, Anna Lee; Perry, Steven T.; Arora, Ravi; Qiu, Dongming; Lamont, Michael Jay; Burwell, Deanna; Dritz, Terence Andrew; McDaniel, Jeffrey S.; Rogers, Jr.; William A.; Silva, Laura J.; Weidert, Daniel J.; Simmons, Wayne W.; Chadwell, G. Bradley

    2009-03-24

    The disclosed invention relates to a process and apparatus for separating a first fluid from a fluid mixture comprising the first fluid. The process comprises: (A) flowing the fluid mixture into a microchannel separator in contact with a sorption medium, the fluid mixture being maintained in the microchannel separator until at least part of the first fluid is sorbed by the sorption medium, removing non-sorbed parts of the fluid mixture from the microchannel separator; and (B) desorbing first fluid from the sorption medium and removing desorbed first fluid from the microchannel separator. The process and apparatus are suitable for separating nitrogen or methane from a fluid mixture comprising nitrogen and methane. The process and apparatus may be used for rejecting nitrogen in the upgrading of sub-quality methane.

  19. Process Guide for Deburring Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Frey, David L.

    2012-10-25

    This report is an updated and consolidated view of the current deburring processes at the Kansas City Plant (KCP). It includes specific examples of current burr problems and the methods used for their detection. Also included is a pictorial review of the large variety of available deburr tools, along with a complete numerical listing of existing tools and their descriptions. The process for deburring all the major part feature categories is discussed.

  20. Information Technologies and Infrastructures for Research Data Aggregation. The Experience of Canada, Netherlands and Germany

    Directory of Open Access Journals (Sweden)

    M. R. Biktimirov

    2015-01-01

    Full Text Available In the paper we focus on the experience of some Networked Readness Index (NRI leading countries. We are interested in their actions aimed at creating and using e-infrastructures and IT for the research data aggregation. As far as quite many of NRI leaders are EU countries, we also take into account EU approaches to the task mentioned. We study some steering papers and some particular IT-projects in the field as well. As a result of the analysis we ascertain that some approaches in different countries have much in common. All of the countries examined acknowledge the problem of e-infrastructures for research data storage and processing to be vital. The countries work hard in order to build and integrate it with the others. We can clearly see some differences caused by traditions and authorities. Sometimes we even could estimate the level of success of a particular country on the way to the problem solution. We also indicate some common elements for all e-infrastructures for research data storage and processing.

  1. Technology entrepreneurship : a process framework

    NARCIS (Netherlands)

    Zhou, Zhao

    2013-01-01

    Scholars are in search of an integrated perspective to explain entrepreneurship in a coherent way. This study sets to contribute to this search with a process framework for understanding similar patterns of entrepreneurship actions over time in different settings. This research uses the multi-case s

  2. Electrochromic Windows: Advanced Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    SAGE Electrochromics, Inc

    2006-12-13

    This project addresses the development of advanced fabrication capabilities for energy saving electrochromic (EC) windows. SAGE EC windows consist of an inorganic stack of thin films deposited onto a glass substrate. The window tint can be reversibly changed by the application of a low power dc voltage. This property can be used to modulate the amount of light and heat entering buildings (or vehicles) through the glazings. By judicious management of this so-called solar heat gain, it is possible to derive significant energy savings due to reductions in heating lighting, and air conditioning (HVAC). Several areas of SAGE’s production were targeted during this project to allow significant improvements to processing throughput, yield and overall quality of the processing, in an effort to reduce the cost and thereby improve the market penetration. First, the overall thin film process was optimized to allow a more robust set of operating points to be used, thereby maximizing the yield due to the thin film deposition themselves. Other significant efforts aimed at improving yield were relating to implementing new procedures and processes for the manufacturing process, to improve the quality of the substrate preparation, and the quality of the IGU fabrication. Furthermore, methods for reworking defective devices were developed, to enable devices which would otherwise be scrapped to be made into useful product. This involved the in-house development of some customized equipment. Finally, the improvements made during this project were validated to ensure that they did not impact the exceptional durability of the SageGlass® products. Given conservative estimates for cost and market penetration, energy savings due to EC windows in residences in the US are calculated to be of the order 0.026 quad (0.026×1015BTU/yr) by the year 2017.

  3. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    The use of new technologies in beef production chains may affect consumers' opinion of meat products. A qualitative study was performed to investigate consumers' acceptance of seven beef processing technologies: marinating by injection aiming for increased 1) healthiness; 2) safety; and 3) eating...... adults (19-60 years old) participated in eight focus groups in Spain, France, Germany and the UK. Results suggested a relationship between acceptance of new beef products, technology familiarity and perceived risks related to its application. Excessive manipulation and fear of moving away from 'natural......' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able...

  4. Fluidization technologies: Aerodynamic principles and process engineering.

    Science.gov (United States)

    Dixit, Rahul; Puthli, Shivanand

    2009-11-01

    The concept of fluidization has been adapted to different unit processes of pharmaceutical product development. Till date a lot of improvements have been made in the engineering design to achieve superior process performance. This review is focused on the fundamental principles of aerodynamics and hydrodynamics associated with the fluidization technologies. Fluid-bed coating, fluidized bed granulation, rotor processing, hot melt granulation, electrostatic coating, supercritical fluid based fluidized bed technology are highlighted. Developments in the design of processing equipments have been explicitly elucidated. This article also discusses processing problems from the operator's perspective along with latest developments in the application of these principles.

  5. National Security Technology Incubator Evaluation Process

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-31

    This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.

  6. The effect of neutron irradiation on oxygen aggregation processes in Si material treated under hydrostatic pressure

    Energy Technology Data Exchange (ETDEWEB)

    Londos, Charalampos A.; Andrianakis, Andreas [Solid State Section, Physics Department, University of Athens, Panepistimiopolis, Zografos, 157 84 Athens (Greece); Misiuk, Andrzej [Institute of Electron Technology, Al. Lotnikow 46, 02-668 Warsaw (Poland)

    2011-03-15

    Silicon is the dominant material in electronic industry. Its use for various applications requires processing stages, important among them those involving thermal treatments. Such treatments in Si trigger the mechanisms of oxygen aggregation resulting in the formation of oxygen precipitates which have important influence on the quality of the material. In the present work, we have investigated the effect of thermal treatments, with or without the application of high hydrostatic pressure, on the development of oxygen precipitates. We have particularly studied the effect of neutron irradiation on the formation of the various oxygen agglomerates in the course of the above treatments. To this end, Si samples initially irradiated by neutrons were subjected to high temperature or/and high temperature-high pressure treatments at 1000 and 1130 C. Afterwards, infrared (IR) measurements were undertaken to study various precipitate morphologies, in particular those giving rise to an IR band around 1080 cm{sup -1} related to octahedral-shaped precipitates and an IR band at 1225 cm{sup -1} attributed to platelet-shaped precipitates. The obtained results were found to be consistent with reports cited in the literature. It was confirmed that the application of pressure during treatments as well as the irradiation with neutrons before these treatments enhance substantially the oxygen aggregation process. Comparisons of the results between treatments at 1000 and 1130 C are presented and discussed. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. Materials, process, product analysis of coal process technology. Phase I final report

    Energy Technology Data Exchange (ETDEWEB)

    Saxton, J. C.; Roig, R. W.; Loridan, A.; Leggett, N. E.; Capell, R. G.; Humpstone, C. C.; Mudry, R. N.; Ayres, E.

    1976-02-01

    The purpose of materials-process-product analysis is a systematic evaluation of alternative manufacturing processes--in this case processes for converting coal into energy and material products that can supplement or replace petroleum-based products. The methodological steps in the analysis include: Definition of functional operations that enter into coal conversion processes, and modeling of alternative, competing methods to accomplish these functions; compilation of all feasible conversion processes that can be assembled from combinations of competing methods for the functional operations; systematic, iterative evaluation of all feasible conversion processes under a variety of economic situations, environmental constraints, and projected technological advances; and aggregative assessments (economic and environmental) of various industrial development scenarios. An integral part of the present project is additional development of the existing computer model to include: A data base for coal-related materials and coal conversion processes; and an algorithmic structure that facilitates the iterative, systematic evaluations in response to exogenously specified variables, such as tax policy, environmental limitations, and changes in process technology and costs. As an analytical tool, the analysis is intended to satisfy the needs of an analyst working at the process selection level, for example, with respect to the allocation of RDandD funds to competing technologies.

  8. Wood Technology: Techniques, Processes, and Products

    Science.gov (United States)

    Oatman, Olan

    1975-01-01

    Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

  9. Distinguishing aggregate formation and aggregate clearance using cell based assays

    NARCIS (Netherlands)

    E. Eenjes, E.; J.M. Dragich; H. Kampinga (Harm); A. Yamamoto, A.

    2016-01-01

    textabstractThe accumulation of ubiquitinated proteinaceous inclusions represents a complex process, reflecting the disequilibrium between aggregate formation and aggregate clearance. Although decreasing aggregate formation or augmenting aggregate clearance will ultimately lead to diminished aggrega

  10. Technological innovation: a structrational process view

    NARCIS (Netherlands)

    Fehse, K.I.A.; Wognum, P.M.

    1999-01-01

    The central aim of our research is to describe and explain how the introduction of a computer-based technology, which supports co-operative work in engineering departments, induces change processes. The employment of computer-based technologies in product development organisations to support co-oper

  11. Roadmap for Process Equipment Materials Technology

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-10-01

    This Technology Roadmap addresses the ever-changing material needs of the chemical and allied process industries, and the energy, economic and environmental burdens associated with corrosion and other materials performance and lifetime issues. This Technology Roadmap outlines the most critical of these R&D needs, and how they can impact the challenges facing today’s materials of construction.

  12. Improvisation during Process-Technology Adoption

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Mathiassen, Lars

    2010-01-01

    SPI technology adoption and events that causes the process to drift in unpredictable directions. To further understand how management's attempt to control the process is complemented by drifting, this article investigates the role of improvisation in adoption of SPI technology in a Danish software......Most software firms struggle to take advantage of the potential benefits of software process improvement (SPI) as they adopt this technology into the complex and dynamic realities of their day-to-day operation. Such efforts are therefore typically fluctuating between management's attempt to control...... in the adoption process despite constrained resources, and, most importantly, helped adapt SPI technology to the everyday practices at SmallSoft. However, we also identified un-called for improvisations and outcomes that were uncoordinated with SmallSoft's goals. Based on these findings we discuss how management...

  13. Comminution and sizing processes of concrete block waste as recycled aggregates.

    Science.gov (United States)

    Gomes, P C C; Ulsen, C; Pereira, F A; Quattrone, M; Angulo, S C

    2015-11-01

    Due to the environmental impact of construction and demolition waste (CDW), recycling is mandatory. It is also important that recycled concrete aggregates (RCA) are used in concrete to meet market demands. In the literature, the influence of RCAs on concrete has been investigated, but very limited studies have been conducted on how the origin of concrete waste and comminution processes influence RCA characteristics. This paper aims to investigate the influence of three different comminution and sizing processes (simple screening, crushing and grinding) on the composition, shape and porosity characteristics of RCA obtained from concrete block waste. Crushing and grinding implies a reduction of RCA porosity. However, due to the presence of coarse quartz rounded river pebbles in the original concrete block mixtures, the shape characteristics deteriorated. A large amount of powder (<0.15 mm) without detectable anhydrous cement was also generated.

  14. APPLICATION OF MICROBIAL TECHNOLOGY TO MINERAL PROCESSING

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The application of microbial technology to mineral processing has been reviewed with respect to the bioleaching of metals from minerals, the influence of biotreatment on flotation, the biobene ficiation of nonmetallic minerals, and the biotreatment for mine waste reclamation.The application of microbial technology to mineral processing has shown the advantages of high efficiency, low energy and reagent consumption, low capital and operating costs, and low pollution of the environment.

  15. Process technology implications of procurement process: some initial observations

    OpenAIRE

    Ellmer, E.; Emmerich, W.; Finkelstein, A

    1998-01-01

    We report on a study of procurement processes in a large organization. The purpose of the study was to identify problems in the organization’s procurement processesand to suggestimprovement actions.Procurement processesdetermine the characteristics of software processes. Procurement processes are themselves complex and amenable to process technology. Cost and scheduling benefits can be realised if procurement and contracting organizations integrate their respective processes...

  16. Development of nanoscale screening technology for the detection and quantification of aggregation in protein therapeutics

    OpenAIRE

    Lone, Mudasir

    2013-01-01

    The use of proteins as therapeutics is one of the fastest growing sectors of the pharmaceutical industry, particularly monoclonal antibodies. However, a significant challenge in the development of such protein-based medicines is to counter aggregation of the proteins in solution (as these drugs are typically administered by injection). In solution form, aggregation of the normally monomeric protein ingredient affects therapeutic efficiency and reduces shelf life. Moreover, the rapid formation...

  17. Wafer level 3-D ICs process technology

    CERN Document Server

    Tan, Chuan Seng; Reif, L Rafael

    2009-01-01

    This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses the technology platform for pre-packaging wafer lever 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology. They are from academia, research labs and industry.

  18. Assessment of the contaminants level in recycled aggregates and alternative new technologies for contaminants recognition and removal

    NARCIS (Netherlands)

    Lotfi, S.; Di Maio, F.; Xia, H.; Serranti, S.; Palmieri, R.; Bonifazi, G.

    2015-01-01

    One of the main challenging problems associated with the use of Recycled Aggregates (RA) is the level of mixed contaminants. For utilizing RA in high-grade applications, it is essential to monitor and minimise the content of the pollutants. To this extent the C2CA concrete recycling process investig

  19. Improvisation during Process-Technology Adoption

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Mathiassen, Lars

    2010-01-01

    SPI technology adoption and events that causes the process to drift in unpredictable directions. To further understand how management's attempt to control the process is complemented by drifting, this article investigates the role of improvisation in adoption of SPI technology in a Danish software...... firm, SmallSoft, over a 10-year period (1996-2005). We found that micro-level and macro-level improvisations interacted, often in uncoordinated ways, to shape SPI technology adoption at SmallSoft. The improvisations enhanced employee creativity, motivation and empowerment, created momentum...... in the adoption process despite constrained resources, and, most importantly, helped adapt SPI technology to the everyday practices at SmallSoft. However, we also identified un-called for improvisations and outcomes that were uncoordinated with SmallSoft's goals. Based on these findings we discuss how management...

  20. Organic Process Technology Valuation: Cyclohexanone Oxime Syntheses

    Science.gov (United States)

    Cannon, Kevin C.; Breen, Maureen P.

    2010-01-01

    Three contemporary processes for cyclohexanone oxime synthesis are evaluated in a case study. The case study introduces organic chemistry students to basic cost accounting to determine the most economical technology. Technical and financial aspects of these processes are evaluated with problem-based exercises that may be completed by students…

  1. Rapid thermal processing science and technology

    CERN Document Server

    Fair, Richard B

    1993-01-01

    This is the first definitive book on rapid thermal processing (RTP), an essential namufacturing technology for single-wafer processing in highly controlled environments. Written and edited by nine experts in the field, this book covers a range of topics for academics and engineers alike, moving from basic theory to advanced technology for wafer manufacturing. The book also provides new information on the suitability or RTP for thin film deposition, junction formation, silicides, epitaxy, and in situ processing. Complete discussions on equipment designs and comparisons between RTP and other

  2. Lightweight concrete masonry units based on processed granulate of corn cob as aggregate

    Directory of Open Access Journals (Sweden)

    Faustino, J.

    2015-06-01

    Full Text Available A research work was performed in order to assess the potential application of processed granulate of corn cob (PCC as an alternative lightweight aggregate for the manufacturing process of lightweight concrete masonry units (CMU. Therefore, CMU-PCC were prepared in a factory using a typical lightweight concrete mixture for non-structural purposes. Additionally, lightweight concrete masonry units based on a currently applied lightweight aggregate such as expanded clay (CMU-EC were also manufactured. An experimental work allowed achieving a set of results that suggest that the proposed building product presents interesting material properties within the masonry wall context. Therefore, this unit is promising for both interior and exterior applications. This conclusion is even more relevant considering that corn cob is an agricultural waste product.En este trabajo de investigación se evaluó la posible aplicación de granulado procesado de la mazorca de maiz como un árido ligero alternativo en el proceso de fabricación de unidades de mampostería de hormigón ligero. Con esta finalidad, se prepararon en una fábrica diversas unidades de mampostería no estructural con granulado procesado de la mazorca de maiz. Además, se fabricaran unidades de mampostería estándar de peso ligero basado en agregados de arcilla expandida. Este trabajo experimental permitió lograr un conjunto de resultados que sugieren que el producto de construcción propuesto presenta interesantes propiedades materiales en el contexto de la pared de mampostería. Por lo tanto, esta solución es prometedora tanto para aplicaciones interiores y exteriores. Esta conclusión es aún más relevante teniendo en cuenta que la mazorca de maíz es un producto de desecho agrícola.

  3. Competition between aggregation and migration processes of a multi-species system

    Institute of Scientific and Technical Information of China (English)

    Ke Jian-Hong; Zhuang You-Yi; Lin Zhen-Quan; Ye Peng

    2005-01-01

    We propose a solvable multi-species aggregation-migration model, in which irreversible aggregations occur between any two aggregates of the same species and reversible migrations occur between any two different species. The kinetic behaviour of an aggregation-migration system is then studied by means of the mean-field rate equation. The results show that the kinetics of the system depends crucially on the details of reaction events such as initial concentration distributions and ratios of aggregation rates to migration rate. In general, the aggregate mass distribution of each species always obeys a conventional or a generalized scaling law, and for most cases at least one species is scaled according to a conventional form with universal constants. Moreover, there is at least one species that can survive finally.

  4. Business process modeling for processing classified documents using RFID technology

    Directory of Open Access Journals (Sweden)

    Koszela Jarosław

    2016-01-01

    Full Text Available The article outlines the application of the processing approach to the functional description of the designed IT system supporting the operations of the secret office, which processes classified documents. The article describes the application of the method of incremental modeling of business processes according to the BPMN model to the description of the processes currently implemented (“as is” in a manual manner and target processes (“to be”, using the RFID technology for the purpose of their automation. Additionally, the examples of applying the method of structural and dynamic analysis of the processes (process simulation to verify their correctness and efficiency were presented. The extension of the process analysis method is a possibility of applying the warehouse of processes and process mining methods.

  5. Aggregation and sedimentation processes during a spring phytoplankton bloom: A field experiment to test coagulation theory

    DEFF Research Database (Denmark)

    Kiørboe, Thomas; Lundsgaard, Claus; Olesen, Michael;

    1994-01-01

    Spring diatom blooms in temperate waters are often terminated by aggregation of the cells into large floes and subsequent mass sedimentation of the phytoplankton to the sea floor. The rate of aggregate formation by physical coagulation depends on the concentration of suspended particles, on the t......Spring diatom blooms in temperate waters are often terminated by aggregation of the cells into large floes and subsequent mass sedimentation of the phytoplankton to the sea floor. The rate of aggregate formation by physical coagulation depends on the concentration of suspended particles...

  6. Process intensification technologies for biodiesel production reactive separation processes

    CERN Document Server

    Kiss, A A

    2014-01-01

    This book is among the first to address the novel process intensification technologies for biodiesel production, in particular the integrated reactive separations. It provides a comprehensive overview illustrated with many industrially relevant examples of novel reactive separation processes used in the production of biodiesel (e.g. fatty acid alkyl esters): reactive distillation, reactive absorption, reactive extraction, membrane reactors, and centrifugal contact separators. Readers will also learn about the working principles, design and control of integrated processes, while also getting a

  7. Small-angle neutron scattering study of organic-phase aggregation in the TALSPEAK process.

    Science.gov (United States)

    Grimes, Travis S; Jensen, Mark P; Debeer-Schmidt, Lisa; Littrell, Ken; Nash, Kenneth L

    2012-11-26

    The Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes (TALSPEAK) process is a solvent extraction based method for separating trivalent lanthanides (Ln(3+)) from trivalent actinide cations in used nuclear fuel reprocessing. In conventional TALSPEAK, the extractant solution is di(2-ethylhexyl)phosphoric acid (HDEHP) in 1,4-diisopropylbenzene (DIPB). The aqueous medium is diethylenetriamine-N,N,N',N″,N″-pentaacetic acid (DTPA) in a concentrated lactic acid (HL) buffer. Lanthanides are extracted by HDEHP/DIPB, while the actinides remain in the aqueous phase as DTPA complexes. Lactic acid is extracted both independently of the lanthanides and as Ln/HL/HDEHP mixed complex(es). Previous results indicate that lanthanides are extracted both as the mixed complex and as a binary Ln(DEHP·HDEHP)(3) species. Small-angle neutron scattering (SANS) has been applied to study the self-organization properties of solute molecules in xylene solutions containing HDEHP, HL, selected lanthanide ions, and water. The scattering results demonstrate that the dominant HDEHP species is the hydrogen bonded dimer, (HDEHP)(2). Absent lanthanides, lactic acid is extracted as the 1:3 complex (HL·(HDEHP)(3)). Scattering in samples containing up to 0.005 M lanthanides (prepared by extracting lanthanides from aqueous media containing 1.0 M buffered lactic acid) indicates that the dominant metal complex is Ln(DEHP·HDEHP)(3). At 0.013 M extracted lanthanide, the scattering results indicate lower Ln:DEHP stoichiometry and larger scattering particles. At higher metal concentrations, the SANS results indicate large aggregates, the largest aggregates achieving a size equivalent to 20 HDEHP monomers as the primary scattering entity. Analysis of particle shapes indicates best fits with a uniform oblate spheroid particle. These results are discussed in connection with the results of a number of complementary observations that have been made on this system.

  8. Aggregate emissions and evaluation of process combinations; Aggregierte Emissionen und Bewertung der Verfahrenskombinationen

    Energy Technology Data Exchange (ETDEWEB)

    Schwing, E.; Jager, J. [Institut WAR, Darmstadt (Germany). Fachgruppe Abfalltechnik

    1998-12-31

    Within the framework of the R and D project ``Mechanical-biological waste conditoning in combination with thermal processing of partial waste fractions``, numerous measurements to determine gaseous and liquid emissions were carried out. These measurements reveal the environmental impact of different treatments and different inputs. They further permit to verify the quality of a treatment. Particularly interesting for the purpose of the project were the total emissions of the considered process combinations. The paper reports the outcome of emission measurements and indicates the variants of process combinations for which the emissions were aggregated. First results of the evaluation of gaseous and liquid emissions are given for these variants. (orig.) [Deutsch] Im Zuge des Forschungs- und Entwicklungsvorhabens `Mechanisch-biologische Restmuellbehandlung unter Einbindung thermischer Verfahren fuer Teilfraktionen` sind zahlreiche Emissionsmessungen bezueglich der luft- und wasserseitigen Emissionen durchgefuehrt worden. Die Ergebnisse dieser Messungen geben Aufschluss ueber die Umweltauswirkungen der verschiedenen Behandlungsverfahren bei unterschiedlichem Input. Des weiteren kann durch sie die Guete des Prozesses ueberprueft werden. Im Projekt interessant sind aber insbesondere die Gesamtemissionen der betrachteten Verfahrenskombinationen. Im folgenden werden die durchgefuehrten Emissionsmessungen und die Varianten der Verfahrenskombinationen, fuer die die Emissionen aggregiert wurden, dargestellt. Dnach werden erste Ergebnisse der Bewertung der luft- und wasserseitigen Emissionen fuer diese Varianten praesentiert. (orig.)

  9. An in-situ Observation on Initial Aggregation Process of Colloidal Particles near Three-Phase Contact Line of Air, Water and Vertical Substrate

    Institute of Scientific and Technical Information of China (English)

    YAO Can; WANG Yu-Ren; LAN Ding; DUAN Li; KANG Qi

    2008-01-01

    The self-assembling process near the three-phase contact line of air, water and vertical substrate is widely used to produce various kinds of nanostructured materials and devices. We perform an in-situ observation on the selfassembling process in the vicinity of the three phase contact line. Three kinds of aggregations, i.e. particle-particle aggregation, particle-chain aggregation and chain-chain aggregation, in the initial stage of vertical deposition process are revealed by our experiments. It is found that the particle-particle aggregation and the particle-chain aggregation can be qualitatively explained by the theory of the capillary immersion force and mirror image force,while the chain-chain aggregation leaves an opening question for the further studies. The present study may provide more deep insight into the self-assembling process of colloidal particles.

  10. Theoretical base of the approach to the representation of aggregate information on the cross sections of the scattering processes

    Directory of Open Access Journals (Sweden)

    Alla A. Mityureva

    2015-12-01

    Full Text Available In the present paper, the approach to the representation of aggregate information on the cross sections of elementary processes is described and its justification within mathematical statistics is given. It is caused by necessity of integrated account of the results obtained by different works at different times, in different groups, based on experimental and theoretical studies in various energy ranges. The main attention is paid to the process of electron-atom scattering. As an example of the proposed approach application, the aggregate result on thus obtained integral cross sections of electron impact excitation of the transitions in the hydrogen atom is presented.

  11. Energy optimization aspects by injection process technology

    Science.gov (United States)

    Tulbure, A.; Ciortea, M.; Hutanu, C.; Farcas, V.

    2016-08-01

    In the proposed paper, the authors examine the energy aspects related to the injection moulding process technology in the automotive industry. Theoretical considerations have been validated by experimental measurements on the manufacturing process, for two types of injections moulding machines, hydraulic and electric. Practical measurements have been taken with professional equipment separately on each technological operation: lamination, compression, injection and expansion. For results traceability, the following parameters were, whenever possible, maintained: cycle time, product weight and the relative time. The aim of the investigations was to carry out a professional energy audit with accurate losses identification. Base on technological diagram for each production cycle, at the end of this contribution, some measure to reduce the energy consumption were proposed.

  12. Process Analytical Technology-Recent Advances

    OpenAIRE

    Vishal Gupta, N.; S. Prathima; Shashikanth. D; A. Kailash Kumar

    2013-01-01

    Process analytical technologies had been applied to manufacturing processes for decades. Recently, the US Food and Drug Administration (FDA) had re-defined the phrase and implemented into an initiative focusing on improving the several aspects of pharmaceutical industry; European agency for the evaluation of Medicinal products (EMEA) has formed a PAT team in 2003. The PAT initiative was initially intended for traditional pharmaceutical manufacturers, but the FDA’s PAT guidance clearly states ...

  13. Platform Technology for Developing Purification Processes

    NARCIS (Netherlands)

    Eppink, M.H.M.; Schreurs, R.; Gijsen, A.; Verhoeven, K.

    2009-01-01

    To shorten time to market for new therapeutic proteins, new and fast methods, such as high throughput screening, are needed to speed up downstream processing. The platform technology discussed in this article includes a structural approach that can be used as a general procedure to purify therapeuti

  14. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  15. Improving drug manufacturing with process analytical technology.

    Science.gov (United States)

    Rodrigues, Licinia O; Alves, Teresa P; Cardoso, Joaquim P; Menezes, José C

    2006-01-01

    Within the process analytical technology (PAT) framework, as presented in the US Food and Drug Administration guidelines, the aim is to design, develop and operate processes consistently to ensure a pre-defined level of quality at the end of the manufacturing process. Three PAT implementation scenarios can be envisaged. Firstly, PAT could be used in its most modest version (in an almost non-PAT manner) to simply replace an existing quality control protocol (eg, using near-infrared spectroscopy for an in-process quality control, such as moisture content). Secondly, the use of in-process monitoring and process analysis could be integrated to enhance process understanding and operation for an existing industrial process. Thirdly, PAT could be used extensively and exclusively throughout development, scale-up and full-scale production of a new product and process. Although the first type of implementations are well known, reports of the second and third types remain scarce. Herein, results obtained from PAT implementations of the second and third types are described for two industrial processes for preparing bulk active pharmaceutical ingredients, demonstrating the benefits in terms of increased process understanding and process control.

  16. Extending Practical Pre-Aggregation in On-Line Analytical Processing

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Jensen, Christian Søndergaard; Dyreson, Curtis E.

    of the practical pre-aggregation approach. This paper significantly extends the scope of practical pre-aggregation to cover a much wider range of realistic situations. Specifically, algorithms are given that transform ``irregular'' dimension hierarchies and fact-dimension relationships, which often occur in real......-world OLAP applications, into well-behaved structures that, when used by existing OLAP systems, enable practical pre-aggregation. The algorithms have low computational complexity and may be applied incrementally to reduce the cost of updating OLAP structures....

  17. Kinetic Behavior of Aggregation-Exchange Growth Process with Catalyzed-Birth

    Institute of Scientific and Technical Information of China (English)

    HAN An-Jia; CHEN Yu; LIN Zhen-Quan; KE Jian-Hong

    2007-01-01

    We propose an aggregation model of a two-species system to mimic the growth of cities' population and assets,in which irreversible coagulation reactions and exchange reactions occur between any two aggregates of the same species,and the monomer-birth reactions of one species occur by the catalysis of the other species.In the case with population-catalyzed birth of assets,the rate kernel of an asset aggregate Bκ of size k grows to become an aggregate Bκ+ 1through a monomer-birth catalyzed by a population aggregate Aj of size j is J(k,j) = Jkjλ.And in mutually catalyzed birth model,the birth rate kernels of population and assets are H(k,j) = Hkjη and J(k,j) = Jkjλ,respectively.The kinetics of the system is investigated based on the mean-field theory.In the model of population-catalyzed birth of assets,the long-time asymptotic behavior of the assets aggregate size distribution obeys the conventional or modified scaling form.In mutually catalyzed birth system,the asymptotic behaviors of population and assets obey the conventional scaling form in the case ofη =λ= 0,and they obey the modified scalingform in the case of η = 0,λ= 1.In the case of η = λ = 1,the total mass of population aggregates and that of asset aggregates both grow much faster than those in population-catalyzed birth of assets model,and they approaches to infinite values in finite time.

  18. Aggregation and sedimentation processes during a spring phytoplankton bloom: A field experiment to test coagulation theory

    DEFF Research Database (Denmark)

    Kiørboe, Thomas; Lundsgaard, Claus; Olesen, Michael

    1994-01-01

    Spring diatom blooms in temperate waters are often terminated by aggregation of the cells into large floes and subsequent mass sedimentation of the phytoplankton to the sea floor. The rate of aggregate formation by physical coagulation depends on the concentration of suspended particles, on the t......Spring diatom blooms in temperate waters are often terminated by aggregation of the cells into large floes and subsequent mass sedimentation of the phytoplankton to the sea floor. The rate of aggregate formation by physical coagulation depends on the concentration of suspended particles...... intervals and we estimated the turbulent shear rate from observations of wind velocity. By means of coagulation theory these observations were combined into a predictor of aggregation rate. We also quantified the sedimentation of phytoplankton, other suspended particles and of aggregates by means of moored...... all similar. During the first week of observation ail increased approximately exponentially in abundance; thereupon the populations fluctuated around species-specific concentrations (10-0-10-4 cells ml-1), even though nutrients were not limiting their growth. This pattern is consistent with a simple...

  19. Process analytical technology (PAT) for biopharmaceuticals

    DEFF Research Database (Denmark)

    Glassey, Jarka; Gernaey, Krist; Clemens, Christoph;

    2011-01-01

    emphasizes the need for improved PAT solutions. We summarize recent progress in this area based on an expert workshop held at the 8(th) European Symposium on Biochemical Engineering Sciences (Bologna, 2010), and highlight new opportunities for exploiting PAT when applied in biopharmaceutical production. We......Process analytical technology (PAT), the regulatory initiative for building in quality to pharmaceutical manufacturing, has a great potential for improving biopharmaceutical production. The recommended analytical tools for building in quality, multivariate data analysis, mechanistic modeling, novel...... models for interpretation of systems biology data and new sensor technologies for cellular states, are instrumental in exploiting this potential. Industrial biopharmaceutical production has gradually become dependent on large-scale processes using sensitive mammalian cell cultures. This further...

  20. Developing technological process of obtaining giality casts

    Directory of Open Access Journals (Sweden)

    A. Issagulov

    2014-10-01

    Full Text Available The article considers the process of manufacturing castings using sand-resin forms and alloying furnace. Were the optimal technological parameters of manufacturing shell molds for the manufacture of castings of heating equipment. Using the same upon receipt of castings by casting in shell molds furnace alloying and deoxidation of the metal will provide consumers with quality products and have a positive impact on the economy in general engineering.

  1. Similarity search processing. Paralelization and indexing technologies.

    Directory of Open Access Journals (Sweden)

    Eder Dos Santos

    2015-08-01

    The next Scientific-Technical Report addresses the similarity search and the implementation of metric structures on parallel environments. It also presents the state of the art related to similarity search on metric structures and parallelism technologies. Comparative analysis are also proposed, seeking to identify the behavior of a set of metric spaces and metric structures over processing platforms multicore-based and GPU-based.

  2. Innovative Technologies for Science Data Processing

    Science.gov (United States)

    Ramachandran, R.; Conover, H. T.; Graves, S. J.; Keiser, K.; Smith, M. R.

    2001-05-01

    The Information Technology and Systems Center (ITSC) at the University of Alabama has long been active in information technology research applied to Earth science data. This poster will showcase three key technologies being developed by ITSC: the Earth Science Markup Language (ESML), data mining applied to Earth science data, and data set independent subsetting tools. Each of these technologies is designed to ease data handling by Earth scientists, thereby freeing their time for research. ESML uses the eXtensible Markup Language (XML) as the basis for standardizing metadata or information about data formats, thus facilitating development of search, visualization, and analysis tools that are independent of data type or format. A unique feature of ESML is that it not only describes the content and structure of the data, but also provides semantic information, which allows an application to intelligently interpret the data. Thus, ESML provides a means for working with legacy, current, and future data sets in an integrated fashion, by defining a standard for external metadata to describe the content, structure, and semantics of a file. The Algorithm Development and Mining (ADaM) system applies data mining technologies to Earth science remote sensing data and other spatial data sets. The ADaM system consists of a series of interoperable data readers, preprocessing and analysis modules, and data writers, which can be linked together in many ways to create customized mining processes. This system has been applied to several Earth science problems including tropical cyclone detection, cloud classification, lightning detection, and mesoscale convective system identification. Current research is adapting data mining technologies for real-time processing on board satellites. ITSC has also developed several tools for science data subsetting. The HDF-EOS Web-Based Subsetter (HEW) is designed to work on any properly formatted HDF-EOS swath or grid data file. UAH is working with

  3. Influence Processes for Information Technology Acceptance

    DEFF Research Database (Denmark)

    Bhattacherjee, Anol; Sanford, Clive Carlton

    2006-01-01

    This study examines how processes of external influence shape information technology acceptance among potential users, how such influence effects vary across a user population, and whether these effects are persistent over time. Drawing on the elaboration-likelihood model (ELM), we compared two...... alternative influence processes, the central and peripheral routes, in motivating IT acceptance. These processes were respectively operationalized using the argument quality and source credibility constructs, and linked to perceived usefulness and attitude, the core perceptual drivers of IT acceptance. We...... further examined how these influence processes were moderated by users' IT expertise and perceived job relevance and the temporal stability of such influence effects. Nine hypotheses thus developed were empirically validated using a field survey of document management system acceptance at an eastern...

  4. Use of morphometric soil aggregates parameters to evaluate the reclamation process in mined areas located at amazon forest - Brazil

    Science.gov (United States)

    Ribeiro, A. I.; Fengler, F. H.; Longo, R. M.; Mello, G. F.; Damame, D. B.; Crowley, D. E.

    2015-12-01

    Brazil has a high mineral potential that have been explored over the years. A large fraction of these mineral resources are located in Amazon region, which is known for its large biodiversity and world climate importance. As the policies that control the Amazon preservation are relatively new, several mining activities have been exploring the Amazon territory, promoting a large process of degradation. Once the mining activities have a high potential of environmental changes the government created polices to restrain the mining in Amazon forests and obligate mining companies to reclaim theirs minded areas. However, the measurement of reclamation development still is a challenging task for the Professionals involved. The volume and complexity of the variables, allied to the difficulty in identifying the reclamation of ecosystem functionalities are still lack to ensure the reclamation success. In this sense this work aims to investigate the representativeness of morphometric soil aggregates parameters in the understanding of reclamation development. The study area is located in the National Forest of Jamari, State of Rondônia. In the past mining companies explored the region producing eight closed mines that are now in reclamation process. The soil aggregates morphometric measurements: geometric mean diameter (GMD), aggregate circularity index, and aggregate roundness, were choose based in its obtaining facility, and their association to biological activity. To achieve the proposed objective the aggregates of eight sites in reclamation, from different closed mines, where chosen and compared to Amazon forest and open mine soil aggregates. The results were analyzed to one way ANOVA to identifying differences between areas in reclamation, natural ecosystem, and open mine. It was obtained differences for GMD and circularity index. However, only the circularity index allowed to identifying differences between the reclamation sites. The results allowed concluding: (1

  5. Synthesis of crystallographically oriented olivine aggregates using colloidal processing in a strong magnetic field

    Science.gov (United States)

    Koizumi, Sanae; Suzuki, Tohru S.; Sakka, Yoshio; Yabe, Kosuke; Hiraga, Takehiko

    2016-11-01

    This study develops a fabrication technique to obtain Fe-free and Fe-bearing (Fe:Mg = 1:9) olivine aggregates not only with high density and fine grain size but with crystallographic preferred orientation (CPO). A magnetic field (≤12 T) is applied to synthetic, fine-grained ( 120 nm), olivine particles dispersed in solvent. The alignment of certain crystallographic axes of the particles with respect to a magnetic direction is anticipated due to magnetic anisotropy of olivine. The dispersed particles are gradually consolidated on a porous alumina mold covered with a solid-liquid separation filter during drainage of the solvent. The resultant aligned consolidated aggregate is then isostatically pressed and vacuum sintered. We find that (1) preparation of fully reacted olivine particles, with less propensity to coalesce; (2) preparation of a suspension with highly dispersed particles; and (3) application of a certain strength of the magnetic field are essential to obtain well-sintered and well-aligned aggregates. High density (i.e., olivine aggregates were successfully synthesized with uniaxially aligned a- and c-axes, respectively. Attempts to uniaxially align the magnetization hard axis and to triaxially align Fe-bearing olivine by rotating the suspension in the magnetic field succeeded in obtaining weakly developed CPO aggregates.

  6. Robotic inspection technology-process an toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Hermes, Markus [ROSEN Group (United States). R and D Dept.

    2005-07-01

    Pipeline deterioration grows progressively with ultimate aging of pipeline systems (on-plot and cross country). This includes both, very localized corrosion as well as increasing failure probability due to fatigue cracking. Limiting regular inspecting activities to the 'scrapable' part of the pipelines only, will ultimately result into a pipeline system with questionable integrity. The confidence level in the integrity of these systems will drop below acceptance levels. Inspection of presently un-inspectable sections of the pipeline system becomes a must. This paper provides information on ROSEN's progress on the 'robotic inspection technology' project. The robotic inspection concept developed by ROSEN is based on a modular toolbox principle. This is mandatory. A universal 'all purpose' robot would not be reliable and efficient in resolving the postulated inspection task. A preparatory Quality Function Deployment (QFD) analysis is performed prior to the decision about the adequate robotic solution. This enhances the serviceability and efficiency of the provided technology. The word 'robotic' can be understood in its full meaning of Recognition - Strategy - Motion - Control. Cooperation of different individual systems with an established communication, e.g. utilizing Bluetooth technology, support the robustness of the ROSEN robotic inspection approach. Beside the navigation strategy, the inspection strategy is also part of the QFD process. Multiple inspection technologies combined on a single carrier or distributed across interacting container must be selected with a clear vision of the particular goal. (author)

  7. Optimal Selection Method of Process Patents for Technology Transfer Using Fuzzy Linguistic Computing

    Directory of Open Access Journals (Sweden)

    Gangfeng Wang

    2014-01-01

    Full Text Available Under the open innovation paradigm, technology transfer of process patents is one of the most important mechanisms for manufacturing companies to implement process innovation and enhance the competitive edge. To achieve promising technology transfers, we need to evaluate the feasibility of process patents and optimally select the most appropriate patent according to the actual manufacturing situation. Hence, this paper proposes an optimal selection method of process patents using multiple criteria decision-making and 2-tuple fuzzy linguistic computing to avoid information loss during the processes of evaluation integration. An evaluation index system for technology transfer feasibility of process patents is designed initially. Then, fuzzy linguistic computing approach is applied to aggregate the evaluations of criteria weights for each criterion and corresponding subcriteria. Furthermore, performance ratings for subcriteria and fuzzy aggregated ratings of criteria are calculated. Thus, we obtain the overall technology transfer feasibility of patent alternatives. Finally, a case study of aeroengine turbine manufacturing is presented to demonstrate the applicability of the proposed method.

  8. Construction aggregates

    Science.gov (United States)

    Nelson, T.I.; Bolen, W.P.

    2007-01-01

    Construction aggregates, primarily stone, sand and gravel, are recovered from widespread naturally occurring mineral deposits and processed for use primarily in the construction industry. They are mined, crushed, sorted by size and sold loose or combined with portland cement or asphaltic cement to make concrete products to build roads, houses, buildings, and other structures. Much smaller quantities are used in agriculture, cement manufacture, chemical and metallurgical processes, glass production and many other products.

  9. ANALYSIS ON TECHNOLOGICAL PROCESSES CLEANING OIL PIPELINES

    Directory of Open Access Journals (Sweden)

    Mariana PǍTRAŞCU

    2015-05-01

    Full Text Available In this paper the researches are presented concerning the technological processes of oil pipelines.We know several technologies and materials used for cleaning the sludge deposits, iron and manganese oxides, dross, stone, etc.de on the inner walls of drinking water pipes or industries.For the oil industry, methods of removal of waste materials and waste pipes and liquid and gas transport networks are operations known long, tedious and expensive. The main methods and associated problems can be summarized as follows: 1 Blowing with compressed air.2 manual or mechanical brushing, sanding with water or dry.3 Wash with water jet of high pressure, solvent or chemical solution to remove the stone and hard deposits.4 The combined methods of cleaning machines that use water jets, cutters, chains, rotary heads cutters, etc.

  10. Comparison of different procedures to stabilize biogas formation after process failure in a thermophilic waste digestion system: influence of aggregate formation on process stability.

    Science.gov (United States)

    Kleyböcker, A; Liebrich, M; Kasina, M; Kraume, M; Wittmaier, M; Würdemann, H

    2012-06-01

    Following a process failure in a full-scale biogas reactor, different counter measures were undertaken to stabilize the process of biogas formation, including the reduction of the organic loading rate, the addition of sodium hydroxide (NaOH), and the introduction of calcium oxide (CaO). Corresponding to the results of the process recovery in the full-scale digester, laboratory experiments showed that CaO was more capable of stabilizing the process than NaOH. While both additives were able to raise the pH to a neutral milieu (pH>7.0), the formation of aggregates was observed particularly when CaO was used as the additive. Scanning electron microscopy investigations revealed calcium phosphate compounds in the core of the aggregates. Phosphate seemed to be released by phosphorus-accumulating organisms, when volatile fatty acids accumulated. The calcium, which was charged by the CaO addition, formed insoluble salts with long chain fatty acids, and caused the precipitation of calcium phosphate compounds. These aggregates were surrounded by a white layer of carbon rich organic matter, probably consisting of volatile fatty acids. Thus, during the process recovery with CaO, the decrease in the amount of accumulated acids in the liquid phase was likely enabled by (1) the formation of insoluble calcium salts with long chain fatty acids, (2) the adsorption of volatile fatty acids by the precipitates, (3) the acid uptake by phosphorus-accumulating organisms and (4) the degradation of volatile fatty acids in the aggregates. Furthermore, this mechanism enabled a stable process performance after re-activation of biogas production. In contrast, during the counter measure with NaOH aggregate formation was only minor resulting in a rapid process failure subsequent the increase of the organic loading rate.

  11. Performance Analysis of Two Big Data Technologies on a Cloud Distributed Architecture. Results for Non-Aggregate Queries on Medium-Sized Data

    Directory of Open Access Journals (Sweden)

    Fotache Marin

    2016-12-01

    Full Text Available Big Data systems manage and process huge volumes of data constantly generated by various technologies in a myriad of formats. Big Data advocates (and preachers have claimed that, relative to classical, relational/SQL Data Base Management Systems, Big Data technologies such as NoSQL, Hadoop and in-memory data stores perform better. This paper compares data processing performance of two systems belonging to SQL (PostgreSQL/Postgres XL and Big Data (Hadoop/Hive camps on a distributed five-node cluster deployed in cloud. Unlike benchmarks in use (YCSB, TPC, a series of R modules were devised for generating random non-aggregate queries on different subschema (with increasing data size of TPC-H database. Overall performance of the two systems was compared. Subsequently a number of models were developed for relating performance on the system and also on various query parameters such as the number of attributes in SELECT and WHERE clause, number of joins, number of processing rows etc.

  12. Distributive Distillation Enabled by Microchannel Process Technology

    Energy Technology Data Exchange (ETDEWEB)

    Arora, Ravi

    2013-01-22

    The application of microchannel technology for distributive distillation was studied to achieve the Grand Challenge goals of 25% energy savings and 10% return on investment. In Task 1, a detailed study was conducted and two distillation systems were identified that would meet the Grand Challenge goals if the microchannel distillation technology was used. Material and heat balance calculations were performed to develop process flow sheet designs for the two distillation systems in Task 2. The process designs were focused on two methods of integrating the microchannel technology 1) Integrating microchannel distillation to an existing conventional column, 2) Microchannel distillation for new plants. A design concept for a modular microchannel distillation unit was developed in Task 3. In Task 4, Ultrasonic Additive Machining (UAM) was evaluated as a manufacturing method for microchannel distillation units. However, it was found that a significant development work would be required to develop process parameters to use UAM for commercial distillation manufacturing. Two alternate manufacturing methods were explored. Both manufacturing approaches were experimentally tested to confirm their validity. The conceptual design of the microchannel distillation unit (Task 3) was combined with the manufacturing methods developed in Task 4 and flowsheet designs in Task 2 to estimate the cost of the microchannel distillation unit and this was compared to a conventional distillation column. The best results were for a methanol-water separation unit for the use in a biodiesel facility. For this application microchannel distillation was found to be more cost effective than conventional system and capable of meeting the DOE Grand Challenge performance requirements.

  13. Processing instrumentation technology: Process definition with a cognitive computer

    Energy Technology Data Exchange (ETDEWEB)

    Price, H.L. [Wilkes Univ., Wilkes-Barre, PA (United States). Mechanical and Materials Engineering Dept.

    1996-11-01

    Much of the polymer composites industry is built around the thermochemical conversion of raw material into useful composites. The raw materials (molding compound, prepreg) often are made up of thermosetting resins and small fibers or particles. While this conversion can follow a large number of paths, only a few paths are efficient, economical and lead to desirable composite properties. Processing instrument (P/I) technology enables a computer to sense and interpret changes taking place during the cure of prepreg or molding compound. P/I technology has been used to make estimates of gel time and cure time, thermal diffusivity measurements and transition temperature measurements. Control and sensing software is comparatively straightforward. The interpretation of results with appropriate software is under development.

  14. Glycation alter the process of Tau phosphorylation to change Tau isoforms aggregation property.

    Science.gov (United States)

    Liu, Kefu; Liu, Yutong; Li, Lingyun; Qin, Peibin; Iqbal, Javed; Deng, Yulin; Qing, Hong

    2016-02-01

    The risk of tauopathies depends in part on the levels and modified composition of six Tau isoforms in the human brain. Abnormal phosphorylation of the Tau protein and the shift of the ratio of 3R Tau to 4R Tau are presumed to result in neurofibrillary pathology and neurodegeneration. Glycation has recently been linked to dementia and metabolic syndrome. To determine the contribution of Tau protein glycation and phosphorylation on Tau aggregation propensity, the assembled kinetics were examined in vitro using Thioflavin T fluorescence assays. We found that glycation and phosphorylation have different effects on aggregation propensity in different Tau isoforms. Different Tau proteins play important parts in each tauopathies, but 3R0N, fetal Tau protein, has no effect on tauopathies. Conversely, 4R2N has more modified sites and a higher tendency to aggregate, playing the most important role in 4R tauopathies. Finally, Glycation, which could modulate Tau phosphorylation, may occur before any other modification. It also regulates the 3R to 4R ratio and promotes 4R2N Tau protein aggregation. Decreasing the sites of glycation, as well as shifting other Tau proteins to 3R0N Tau proteins has potential therapeutic implications for tauopathies.

  15. Optimization of Casting Process Parameters for Homogeneous Aggregate Distribution in Self-Compacting Concrete: A Feasibility Study

    DEFF Research Database (Denmark)

    Spangenberg, Jon; Tutum, Cem Celal; Hattel, Jesper Henri;

    2011-01-01

    The use of self-compacting concrete (SCC) as a construction material has been getting more attention from the industry. Its application area varies from standard structural elements in bridges and skyscrapers to modern architecture having geometrical challenges. However, heterogeneities induced...... during the casting process may lead to variations of local mechanical properties and hence to a potential decrease in load carrying capacity of the structure. This paper presents a methodology for optimization of SCC casting aiming at having a homogeneous aggregate distribution; a beam has been used...... as geometric example. The aggregate distribution is predicted by a numerical flow model coupled with a user defined volume fraction subroutine. The process parameters in casting with SCC in general are horizontal and vertical positions, movement, as well as the size of the inlet, and the duration...

  16. Hydration and diffusion processes shape microbial community organization and function in model soil aggregates

    Science.gov (United States)

    Ebrahimi, Ali; Or, Dani

    2015-12-01

    The constantly changing soil hydration status affects gas and nutrient diffusion through soil pores and thus the functioning of soil microbial communities. The conditions within soil aggregates are of particular interest due to limitations to oxygen diffusion into their core, and the presence of organic carbon often acting as binding agent. We developed a model for microbial life in simulated soil aggregates comprising of 3-D angular pore network model (APNM) that mimics soil hydraulic and transport properties. Within these APNM, we introduced individual motile (flagellated) microbial cells with different physiological traits that grow, disperse, and respond to local nutrients and oxygen concentrations. The model quantifies the dynamics and spatial extent of anoxic regions that vary with hydration conditions, and their role in shaping microbial community size and activity and the spatial (self) segregation of anaerobes and aerobes. Internal carbon source and opposing diffusion directions of oxygen and carbon within an aggregate were essential to emergence of stable coexistence of aerobic and anaerobic communities (anaerobes become extinct when carbon sources are external). The model illustrates a range of hydration conditions that promote or suppress denitrification or decomposition of organic matter and thus affect soil GHG emissions. Model predictions of CO2 and N2O production rates were in good agreement with limited experimental data. These limited tests support the dynamic modeling approach whereby microbial community size, composition, and spatial arrangement emerge from internal interactions within soil aggregates. The upscaling of the results to a population of aggregates of different sizes embedded in a soil profile is underway.

  17. Effect of local environment in resonant domains of polydisperse plasmonic nanoparticle aggregates on optodynamic processes in pulsed laser fields

    Institute of Scientific and Technical Information of China (English)

    A. E. Ershov; A. P. Gavrilyuk; S. V. Karpov; P. N. Semina

    2015-01-01

    Interactions of pulsed laser radiation with resonance domains of multiparticle colloidal aggregates having an increas-ingly complex local environment are studied via an optodynamic model. The model is applied to the simplest configurations, such as single particles, dimers, and trimers consisting of mono-and polydisperse Ag nanoparticles. We analyze how the local environment and the associated local field enhancement by surrounding particles affect the optodynamic processes in domains, including their photomodification and optical properties.

  18. Effects of temporal fluctuation in population processes of intertidal Lanice conchilega (Pallas, 1766) aggregations on its ecosystem engineering

    Science.gov (United States)

    Alves, Renata M. S.; Vanaverbeke, Jan; Bouma, Tjeerd J.; Guarini, Jean-Marc; Vincx, Magda; Van Colen, Carl

    2017-03-01

    Ecosystem engineers contribute to ecosystem functioning by regulating key environmental attributes, such as habitat availability and sediment biogeochemistry. While autogenic engineers can increase habitat complexity passively and provide physical protection to other species, allogenic engineers can regulate sediment oxygenation and biogeochemistry through bioturbation and/or bioirrigation. Their effects rely on the physical attributes of the engineer and/or its biogenic constructs, such as abundance and/or size. The present study focused on tube aggregations of a sessile, tube-building polychaete that engineers marine sediments, Lanice conchilega. Its tube aggregations modulate water flow by dissipating energy, influencing sedimentary processes and increasing particle retention. These effects can be influenced by temporal fluctuations in population demographic processes. Presently, we investigated the relationship between population processes and ecosystem engineering through an in-situ survey (1.5 years) of L. conchilega aggregations at the sandy beach of Boulogne-sur-Mer (France). We (1) evaluated temporal patterns in population structure, and (2) investigated how these are related to the ecosystem engineering of L. conchilega on marine sediments. During our survey, we assessed tube density, demographic structure, and sediment properties (surficial chl-a, EPS, TOM, median and mode grain size, sorting, and mud and water content) on a monthly basis for 12 intertidal aggregations. We found that the population was mainly composed by short-lived (6-10 months), small-medium individuals. Mass mortality severely reduced population density during winter. However the population persisted, likely due to recruits from other populations, which are associated to short- and long-term population dynamics. Two periods of recruitment were identified: spring/summer and autumn. Population density was highest during the spring recruitment and significantly affected several

  19. Technology development for DUPIC process safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Hong, J. S.; Kim, H. D.; Lee, Y. G.; Kang, H. Y.; Cha, H. R.; Byeon, K. H.; Park, Y. S.; Choi, H. N. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-07-01

    As the strategy for DUPIC(Direct Use of spent PWR fuel In CANDU reactor) process safeguards, the neutron detection method was introduced to account for nuclear materials in the whole DUPIC process by selectively measuring spontaneous fission neutron signals from {sup 244}Cm. DSNC was designed and manufactured to measure the account of curium in the fuel bundle and associated process samples in the DUPIC fuel cycle. The MCNP code had response profile along the length of the CANDU type fuel bundle. It was found experimentally that the output signal variation due to the overall azimuthal asymmetry was less than 0.2%. The longitudinal detection efficiency distribution at every position including both ends was kept less than 2% from the average value. Spent fuel standards almost similar to DUPIC process material were fabricated from a single spent PWR fuel rod and the performance verification of the DSNC is in progress under very high radiation environment. The results of this test will be eventually benchmarked with other sources such as code simulation, chemical analysis and gamma analysis. COREMAS-DUPIC has been developed for the accountability management of nuclear materials treated by DUPIC facility. This system is able to track the controlled nuclear materials maintaining the material inventory in near-real time and to generate the required material accountability records and reports. Concerning the containment and surveillance technology, a focused R and D effort is given to the development of unattended continuous monitoring system. Currently, the component technologies of radiation monitoring and surveillance have been established, and continued R and D efforts are given to the integration of the components into automatic safeguards diagnostics. (author).

  20. On use of the alpha stable self-similar stochastic process to model aggregated VBR video traffic

    Institute of Scientific and Technical Information of China (English)

    Huang Tianyun

    2006-01-01

    The alpha stable self-similar stochastic process has been proved an effective model for high variable data traffic. A deep insight into some special issues and considerations on use of the process to model aggregated VBR video traffic is made. Different methods to estimate stability parameter α and self-similar parameter H are compared. Processes to generate the linear fractional stable noise (LFSN) and the alpha stable random variables are provided. Model construction and the quantitative comparisons with fractional Brown motion (FBM) and real traffic are also examined. Open problems and future directions are also given with thoughtful discussions.

  1. Investigation of dynamic processing on aluminum floc aggregation: Cyclic shearing recovery and effect of sulfate ion

    Institute of Scientific and Technical Information of China (English)

    CHU YongBao; GAO BaoYu; YUE QinYan; WANG Yan

    2008-01-01

    The floe formation and re-aggregation potential and the effects of sulfate on coagulation by AlCl3, polyaluminum chloride (PAC), and Al13 species using a photometric dispersion analyzer (PDA) are in-vestigated. It is found that the recovery level from shearing is the highest for the Al13 species. This is likely s result of Increased collision efficiency due to more effective charge neutralization. The ex-perimental results show that sulfate has a significant effect on coagulation and promoting aggregation of hydrolyzed specie8 for the Al13 species. It results in significant improvement of the coagulation effi-ciency through an electrostatic patch effect. The results further indicate that zeta potential of the psrti-cle suspension is not the only indicator for the coagulant efficiency when preoipitate formation sig-nificantly Improves coagulation.

  2. The Ventriloquist's Dummy? The Role of Technology in Political Processes

    DEFF Research Database (Denmark)

    Koch, Christian

    2000-01-01

    This article examines the active role of technology in political processes, drawing on organisational politics and sociology of technology. A case study of the processes of the management of technology demonstrates the multiple roles that technology plays in developing a promoting coalition...... with a political programme. This programme joins ann directs the actors. Technology is part of the structural context of the process the process itself and the competing political programmes. The active role of technology in the process is examined through recurring and reciprocal patterns of social control over...

  3. Effects of ethanol on aggregation, serotonin release, and amyloid precursor protein processing in rat and human platelets.

    Science.gov (United States)

    Ehrlich, Daniela; Humpel, Christian

    2014-01-01

    It is known that oxidative stress leads to amyloid precursor protein (APP) dysregulation in platelets. Ethanol (EtOH) is a vascular risk factor and induces oxidative stress. The aim of the present study was thus to investigate whether EtOH affects APP processing in rat and human platelets. Platelets were exposed to 50 mM EtOH with and without 2 mM calcium-chloride (CaCl₂) for 20 or 180 minutes at 37°C. Platelet aggregation, serotonin release and APP isoforms 130 and 106/110 kDa were analyzed. As a control, 100 mM H₂O₂ was tested in rat platelets. Our data show that EtOH alone did not affect any of the analyzed parameters, whereas CaCl₂ significantly increased aggregation of rat and human platelets. In addition, CaCl₂ alone enhanced serotonin release in rat platelets. EtOH counteracted CaCl₂-induced aggregation and serotonin release. In the presence of CaCl₂, EtOH reduced the 130 kDa APP isoform in rat and human platelets. In conclusion, this study shows that in the presence of CaCl₂, EtOH affects the platelet function and APP processing in rat and human platelets.

  4. Software engineering technology transfer: Understanding the process

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1993-01-01

    Technology transfer is of crucial concern to both government and industry today. In this report, the mechanisms developed by NASA to transfer technology are explored and the actual mechanisms used to transfer software development technologies are investigated. Time, cost, and effectiveness of software engineering technology transfer is reported.

  5. Process Technology for Immobilized Lipasecatalyzed Reactions

    DEFF Research Database (Denmark)

    Xu, Yuan

    Biocatalysis has attracted significant attention recently, mainly due to its high selectivity and potential benefits for sustainability. Applications can be found in biorefineries, turning biomass into energy and chemicals, and also for products in the food and pharmaceutical industries. However......, most applications remain in the production of high-value fine chemicals, primarily because of the expense of introducing new technology. In particular lipasecatalyzed synthesis has already achieved efficient operations for high-value products and more interesting now is to establish opportunities...... for the production of biodiesel. The two processes are focused on the conversion of the two main components of vegetable oil materials, glyceride esters and free fatty acids respectively, into fatty acid alkyl esters. Although biodiesel is conventionally prepared via chemical-catalyzed transesterification...

  6. COMPLEX PROCESSING TECHNOLOGY OF TOMATO RAW MATERIALS

    Directory of Open Access Journals (Sweden)

    A. M. Gadzhieva

    2015-01-01

    Full Text Available Tomatoes grown in the central and southern parts of the country, which contain 5-6 % of solids, including 0.13 % of pectin, 0.86 % of fat, 0.5 % of organic acids; 0.5 % minerals, etc. were used as a subject of research. These tomatoes, grown in the mountains, on soils with high salinity, contain high amounts of valuable components and have a long-term preservation. For the extraction of valuable components from dried tomato pomace CO2 extraction method was applied. Technological and environmental feasibility of tomatoes stage drying in the atmosphere of inert gas in solar dry kiln were evaluated; production scheme of dried tomatoes is improved; a system for tomato pomace drying is developed; a production scheme of powders of pulp, skin and seeds of tomatoes is developed. Combined method of tomato pomace drying involves the simultaneous use of the electromagnetic field of low and ultra-high frequency and blowing product surface with hot nitrogen. Conducting the drying process in an inert gas atmosphere of nitrogen intensified the process of moisture removing from tomatoes. The expediency of using tomato powder as enriching additive was proved. Based on the study of the chemical composition of the tomato powder made from Dagestan varieties of tomatoes, and on the organoleptic evaluation and physico-chemical studies of finished products, we have proved the best degree of recoverability of tomato powder during the production of reconstituted juice and tomato beverages.

  7. Influence of constant magnetic field on aggregation processes in magnetite colloids

    Science.gov (United States)

    Gareev, K. G.; Kononova, I. E.; Levitckii, V. S.; Moshnikov, V. A.; Nalimova, S. S.

    2014-12-01

    Colloids of Fe3O4/SiO2 nanoparticles derived by a two-stage technique on the base of tetraetoxisilane soles were studied. Phase composition of the particles was analyzed by X-ray diffraction and Raman spectroscopy. It was found that phase transition of Fe3O4 into α-Fe2O3 occurs at a laser power exceeding a threshold value. The aggregation of the particles to linear structures in a constant magnetic field was studied by atomic force microscopy. The data on the change in resistance of Fe3O4/SiO2 colloids under an applied magnetic field were obtained.

  8. Ratio-Based Gradual Aggregation of Data

    DEFF Research Database (Denmark)

    Iftikhar, Nadeem

    2012-01-01

    Majority of databases contain large amounts of data, gathered over long intervals of time. In most cases, the data is aggregated so that it can be used for analysis and reporting purposes. The other reason of data aggregation is to reduce data volume in order to avoid over-sized databases that ma....... Gradual data aggregation is a process that reduces data volume by converting the detailed data into multiple levels of summarized data as the data gets older. This paper also describes implementation strategies of the proposed methods based on standard database technology....

  9. A design process for creative technology

    NARCIS (Netherlands)

    Mader, Angelika; Eggink, Wouter

    2014-01-01

    Creative Technology is a new bachelor programme at the University of Twente. Goal of Creative Technology is to design products and applications that improve the quality of daily life in its manifold aspects, building on Information and Communication Technology (ICT). The application domains range fr

  10. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    and supports an industrial manager in achieving objective and comprehensive decisions regarding selection of a manufacturing technology. Originality/value - The paper explains the process of risk calculation in manufacturing technology selection by dividing the decision-making environment into manufacturing...... and supply chain environment. The evaluation of a manufacturing technology considering supply chain opportunities and threats provides a broader perspective to the technology evaluation process. The inclusion of supply chain dimension in technology selection process facilitates an organisation to select...... a manufacturing technology not only according to its own requirements, but also according to the interest of its constituent supply chain....

  11. Theory of activated-rate processes under shear with application to shear-induced aggregation of colloids.

    Science.gov (United States)

    Zaccone, Alessio; Wu, Hua; Gentili, Daniele; Morbidelli, Massimo

    2009-11-01

    Using an approximation scheme within the convective diffusion (two-body Smoluchowski) equation framework, we unveil the shear-driven aggregation mechanism at the origin of structure formation in sheared colloidal systems. The theory, verified against numerics and experiments, explains the induction time followed by explosive (irreversible) rise of viscosity observed in charge-stabilized colloidal and protein systems under steady shear. The Arrhenius-type equation with shear derived here, extending Kramers' theory in the presence of shear, clearly demonstrates the important role of shear drive in activated-rate processes as they are encountered in soft condensed matter.

  12. Uncertainty modeling process for semantic technology

    Directory of Open Access Journals (Sweden)

    Rommel N. Carvalho

    2016-08-01

    Full Text Available The ubiquity of uncertainty across application domains generates a need for principled support for uncertainty management in semantically aware systems. A probabilistic ontology provides constructs for representing uncertainty in domain ontologies. While the literature has been growing on formalisms for representing uncertainty in ontologies, there remains little guidance in the knowledge engineering literature for how to design probabilistic ontologies. To address the gap, this paper presents the Uncertainty Modeling Process for Semantic Technology (UMP-ST, a new methodology for modeling probabilistic ontologies. To explain how the methodology works and to verify that it can be applied to different scenarios, this paper describes step-by-step the construction of a proof-of-concept probabilistic ontology. The resulting domain model can be used to support identification of fraud in public procurements in Brazil. While the case study illustrates the development of a probabilistic ontology in the PR-OWL probabilistic ontology language, the methodology is applicable to any ontology formalism that properly integrates uncertainty with domain semantics.

  13. Nonuniversality and Breakdown of Scaling in Aggregation Process with Removal Term

    Institute of Scientific and Technical Information of China (English)

    KE Jian-Hong; LIN Zhen-Quan; CHEN Yun-Su

    2003-01-01

    We study the kinetics of an irreversible aggregation model with removal term. We solve the mean-fieldrate equation to obtain the general solution of the cluster-mass distribution for the case with arbitrary time-dependentremoval probability P(t). In particular, we analyze the scaling properties of the cluster distribution in the case withP(t) = u(t + t0)v and find that the cluster-mass distribution always obeys a scaling law. We also investigate the kineticbehavior of another simple system, in which the removal probability of a cluster is proportional to its mass, and theresults indicate that for this system the scaling description of the cluster-mass distribution breaks down completely.

  14. Nonuniversality and Breakdown of Scaling in Aggregation Process with Removal Term

    Institute of Scientific and Technical Information of China (English)

    KEJian-Hong; LINZhen-Quan; CHENYun-Su

    2003-01-01

    We study the kinetics of an irreversible aggregation model with removal term. We solve the mean-field rate equation to obtain the general solution of the cluster-mass distribution for the case with arbitrary time-dependent remora/probability P(t). In particular, we analyze the scaling properties of the cluster distribution in the case with P(t)=u(t+t0)v and find that the cluster-mass distribution always obeys a scaling law. We also investigate the kinetic behavior of another simple system, in which the removal probability of a cluster is proportional to its mass, and the results indicate that for this system the scaring description of the cluster-mass distribution breaks down completely.

  15. Multi-sensor Information Processing using Prediction Market-based Belief Aggregation

    CERN Document Server

    Jumadinova, Janyl

    2012-01-01

    We consider the problem of information fusion from multiple sensors of different types with the objective of improving the confidence of inference tasks, such as object classification, performed from the data collected by the sensors. We propose a novel technique based on distributed belief aggregation using a multi-agent prediction market to solve this information fusion problem. To monitor the improvement in the confidence of the object classification as well as to dis-incentivize agents from misreporting information, we have introduced a market maker that rewards the agents instantaneously as well as at the end of the inference task, based on the quality of the submitted reports. We have implemented the market maker's reward calculation in the form of a scoring rule and have shown analytically that it incentivizes truthful revelation or accurate reporting by each agent. We have experimentally verified our technique for multi-sensor information fusion for an automated landmine detection scenario. Our experi...

  16. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  17. TECHNOLOGY SUMMARY ADVANCING TANK WASTE RETRIEVAL AND PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    SAMS TL; MENDOZA RE

    2010-08-11

    This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them.

  18. TECHNOLOGY SUMMARY ADVANCING TANK WASTE RETREIVAL AND PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    SAMS TL

    2010-07-07

    This technology overview provides a high-level summary of technologies being investigated and developed by Washington River Protection Solutions (WRPS) to advance Hanford Site tank waste retrieval and processing. Technology solutions are outlined, along with processes and priorities for selecting and developing them.

  19. Decision Gate Process for Assessment of a Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  20. Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research

    Energy Technology Data Exchange (ETDEWEB)

    Speight, J.G.

    1992-01-01

    Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO[sub 2] HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

  1. Optical dynamics of molecular aggregates

    NARCIS (Netherlands)

    de Boer, Steven

    2006-01-01

    The subject of this thesis is the spectroscopy and dynamics of molecular aggregates in amorphous matrices. Aggregates of three different molecules were studied. The molecules are depicted in Fig. (1.1). Supersaturated solutions of these molecules show aggregate formation. Aggregation is a process si

  2. A Technology Approach to Improving Process Management

    Science.gov (United States)

    Dray, Lori; Strasburger, Tom

    2013-01-01

    It is impossible to ignore how technology is infiltrating education. Interactive projectors and other technologies give teachers and students the opportunity to bring lessons to life. Some districts are replacing textbooks with digital content, allowing students to interact with content in new ways. Galion City School District in Galion, Ohio, is…

  3. Technological suitability of sheep milk for processing

    Directory of Open Access Journals (Sweden)

    Romualda Danków

    2011-06-01

    Full Text Available Annual world sheep milk production is estimated at the level of 8.2 million tons and constitutes 1.5% of the total milk production obtained from various species of mammals. Majority of this milk is used to manufacture cheeses and fermented beverages. These products are commonly considered as regional articles and are protected by legal regulations which guarantee their taste and aroma typical for a given region and which they owe to traditional production technologies. In Poland, sheep are reared, primarily, in mountainous areas (Podhale, Bieszczady but also in Wielkopolska and Podlasie. The sheep population in Poland is estimated at 223 000 animals but milk is obtained only from a small number of animals and its annual production is assessed at the level of 1000 t. The nutritional value of sheep milk is higher in comparison with goat or cow milk. Sheep milk protein is characterised by a high biological value comparable with the biological value of the whole chicken egg. In addition, products manufactured from sheep milk possess high nutritive value. Due to its rich chemical composition, sheep milk provides an excellent raw material for processing into maturing soft and hard cheeses (75-80% of protein is casein, for fermented beverages, both natural and with different tastes, as well as butter, ghee and ice-cream. High proportion of dry matter (up to 18% found in sheep milk does not require application of any thickeners in production of fermented beverages. That is why these beverages are fully natural and free of additives.

  4. Plan for advanced microelectronics processing technology application

    Energy Technology Data Exchange (ETDEWEB)

    Goland, A.N.

    1990-10-01

    The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.

  5. Early stages of salmon calcitonin aggregation: effect induced by ageing and oxidation processes in water and in the presence of model membranes.

    Science.gov (United States)

    Gaudiano, Maria Cristina; Colone, Marisa; Bombelli, Cecilia; Chistolini, Pietro; Valvo, Luisa; Diociaiuti, Marco

    2005-06-30

    The natural ageing- and hydrogen peroxide-induced aggregation of salmon calcitonin were studied in water and in the presence of dipalmitoylphosphatidylcholine (DPPC) liposomes. The early stages of the aggregation process at low protein concentration were investigated by means of Circular Dichroism spectroscopy (CD) and conventional and immunogold labelling Transmission Electron Microscopy (TEM). In buffered water solution, salmon calcitonin showed a two-stage conformational variation related to fibril formation and phase-separation of larger aggregates. A first stage, characterised by small conformational changes but a decrease in dichroic band intensity, was followed by a second stage, 6 days after, leading to higher conformational variations and aggregations. Salmon calcitonin showed a distinct modification in the secondary structure and aggregate morphology in the presence of hydrogen peroxide with respect to natural ageing, indicating that the two aggregation processes (natural and chemical-induced) followed a distinct mechanism. The oxidised forms of the peptide were separated by liquid chromatography. The same study was performed in the presence of DPPC liposomes. The results obtained by conventional and immunogold labelling TEM evidenced that salmon calcitonin in buffered water solution essentially does not enter the liposomes but forms around them a fibril network characterised by the same conformational changes after 6 days. The oxidised sample in the presence of liposomes showed a "fibrils hank", separated from liposomes. The presence of liposomes did not affect either the aggregation or the conformational modifications yet observed by TEM and CD in water solution.

  6. Trickle or clumped infection process? An analysis of aggregation in the weights of the parasitic roundworm of humans, Ascaris lumbricoides.

    Science.gov (United States)

    Walker, Martin; Hall, Andrew; Basáñez, María-Gloria

    2010-10-01

    Studying the distribution of parasitic helminth body size across a population of definitive hosts can advance our understanding of parasite population biology. Body size is typically correlated with egg production. Consequently, inequalities in body size have been frequently measured to infer variation in reproductive success (VRS). Body size is also related to parasite age (time since entering the definitive host) and potentially provides valuable information on the mode of acquisition and establishment of immature (larval) parasites within the host: whether parasites tend to establish singly or in aggregates. The mode of acquisition of soil-transmitted helminths has been a theoretical consideration in the parasitological literature but has eluded data-driven investigation. In this paper, we analyse individual Ascaris lumbricoides weight data collected from a cohort of human hosts before and after re-infection following curative treatment, and explore its distribution within and among individuals in the population. Lorenz curves and Gini coefficients indicate that levels of weight inequality (a proxy for VRS) in A.lumbricoides are lower than other published estimates from animal-helminth systems. We explore levels of intra-host weight aggregation using statistical models to estimate the intraclass correlation coefficient (ICC) while adjusting for covariates using a flexible fractional polynomial transformation approach capable of handling non-linear functional relationships. The estimated ICCs indicate that weights are aggregated within hosts both at equilibrium and after re-infection, suggesting that parasites may establish within the host in clumps. The implications of a clumped infection process are discussed in terms of ascariasis transmission dynamics, control and anthelmintic resistance.

  7. Study On Machining Processing Technology Risk Control

    Institute of Scientific and Technical Information of China (English)

    Li Xiqing

    2015-01-01

    In the industrial production process,only to ful y guarantee the machining production safety, it can been ensured that the smooth completion of machining process.Under this back ground,in the machining production process,the machinery processing safety would been ful y concerned,several factors, which may lead to the problem of mechanical processing and production process,were analyzed,and the relevant control strategies were researched.In view of this situation,this paper wil specifical y combined with the machining process characteristics to study the machining process manufacturability risk control.

  8. Suitability of Sour Crude Processing and Resid Hydrotreating Technologies

    Institute of Scientific and Technical Information of China (English)

    Sun Lili

    2005-01-01

    This article has analyzed the environment and tasks confronting China's petroleum refining industry, and has referred to principles for selecting the resid processing technologies and viability of various combination technologies for resid processing. Taking into account the actual commercial practice of resid hydrogenation units, this article has also discussed methods for processing high-sulfur inferior crudes as well as the suitability of resid hydrogenation technology.

  9. Introduction to technology roadmapping: The semiconductor industry association`s technology roadmapping process

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.L.

    1997-04-01

    A technology roadmap is the result of a strategic technology planning process that cooperatively identifies (1) a particular industry`s common product and process performance targets, (2) the technology alternatives and milestones for meeting these targets, and (3) a common technology path for research and development activities. The author describes a successful major roadmapping experience - the Semiconductor Industry Association`s Technology Roadmapping Process, which culminated in a workshop held in 1992. The report explains the committee structure and processes that were used both before and after the workshop and presents principles and practices that can aid future technology roadmappers. Appendix 1 summarizes the process from a committee-structure viewpoint. Appendix 2 summarizes the process from a functional view-point. Appendix 3 answers some frequently asked questions about technology roadmapping.

  10. Information technologies in management processes: e-Government advances

    OpenAIRE

    Rosimeri Maria de Souza; Universidade Federal de Santa Catarina; Paula de Souza; Universidade Federal de Santa Catarina; Sérgio Murilo Petri; Universidade Federal de Santa Catarina; Eugenio Andrés Díaz Merino; Universidade Federal de Santa Catarina

    2014-01-01

    This work presents an information technologies study in management organization, delimited to the Digital Government actions (e-Gov. portal). Its objective is to verify how the information and communication technologies (ICT) influence the management processes, using the e-Gov. portal as the main tool providing technological changes to citizens. This research is justified by the fact that information technology (IT) becomes increasingly essential to the society, to organizations and to busine...

  11. ON THE RUIN FUNCTIONS FOR A CORRELATED AGGREGATE CLAIMS MODEL WITH POISSON AND ERLANG RISK PROCESSES

    Institute of Scientific and Technical Information of China (English)

    Liu Yan; Yang Wenquan; Hu Yijun

    2006-01-01

    This article considers a risk model as in Yuen et al. (2002). Under this model the two claim number processes are correlated. Claim occurrence of both classes relate to Poisson and Erlang processes. The formulae is derived for the distribution of the surplus immediately before ruin, for the distribution of the surplus immediately after ruin and the joint distribution of the surplus immediately before and after ruin. The asymptotic property of these ruin functions is also investigated.

  12. Concrete dam construction using computerized aggregate plant (CAP). ; Automatic production control using image processing. Jidoka kotsuzai plant (CAP) ni yoru concrete dam seko. ; Gazo shori wo chushinnishita seisanryo no jido seigyo

    Energy Technology Data Exchange (ETDEWEB)

    Aso, K.; Wakiyama, I.; Kita, Y. (Hazama Gumi, Ltd., Tokyo (Japan))

    1992-10-25

    For an aggregate plant that crushes and sorts out rocks using crushers and screens, a computerized aggregate plant (CAP) was structured utilizing the latest micro computers and communications technology. While local automations have been carried out in other plants using relays and sequencers, this CAP development has been targeted at further economic optimization and manpower saving with the main aims placed on machine control using operation control and feedback control based on the quantity control method. The system consists of the crushing control system to adjust automatically the vibration feeders by detecting empty-full levels in the hoppers and load current in the crushers; the image processing system to analyze still images photographed by a CCD camera and measure amount of aggregates transported and grain shapes the automatic damper system to adjust amounts of materials unloaded from and charged into the crushers using a computer; and the system to link batcher plants with the aggregate plant. The system was given verification tests at several dam sites. 7 figs., 5 tabs.

  13. A Survey on Evaluation Factors for Business Process Management Technology

    NARCIS (Netherlands)

    Mutschler, B.; Reichert, M.U.

    2006-01-01

    Estimating the value of business process management (BPM) technology is a difficult task to accomplish. Computerized business processes have a strong impact on an organization, and BPM projects have a long-term cost amortization. To systematically analyze BPM technology from an economic-driven persp

  14. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  15. Innovative Canadian Process Technology For Biodiesel Production

    Energy Technology Data Exchange (ETDEWEB)

    Johar, Sangat; Norton, Kevin

    2010-09-15

    The need for increasing renewable and alternative energy in the global energy mix has been well recognized by Governments and major scientific forums to reduce climate change impact for this living planet. Biodiesel has very high potential for GHG emission reduction. An innovative process developed in Canada provides solution to mitigate the feedstock, yield and quality issues impacting the industry. The Biox process uses a continuous process which reduces reaction times, provides > 99% yield of high quality biodiesel product. The process is feedstock flexible and can use cheaper higher FFA feedstock providing a sustainable approach for biodiesel production.

  16. Technological suitability of sheep milk for processing

    OpenAIRE

    Romualda Danków; Jan Pikul

    2011-01-01

    Annual world sheep milk production is estimated at the level of 8.2 million tons and constitutes 1.5% of the total milk production obtained from various species of mammals. Majority of this milk is used to manufacture cheeses and fermented beverages. These products are commonly considered as regional articles and are protected by legal regulations which guarantee their taste and aroma typical for a given region and which they owe to traditional production technologies. In Poland, sheep are re...

  17. Hybrid process technologies in the financial sector

    DEFF Research Database (Denmark)

    Debois, Søren; Hildebrandt, Thomas; Marquard, Morten

    2015-01-01

    the variants of the process that are relevant to them. This paper reports on a project we undertook with such a credit institute where we investigated and addressed these issues by providing a hybrid solution, allowing processes to be modelled using our constraint-based modelling tools, but also supporting...

  18. Hybrid process technologies in the financial sector

    DEFF Research Database (Denmark)

    Debois, Søren; Hildebrandt, Thomas; Marquard, Morten;

    2015-01-01

    Danish mortgage credit institutes deal with highly variable and knowledgeintensive processes. At the same time these processes are required to be strictly conformant to current regulations and laws. In addition different divisions of the business are interested in different views on the same proc...

  19. Thermodynamics for separation-process technology

    Energy Technology Data Exchange (ETDEWEB)

    Prausnitz, J.M.

    1995-10-01

    When contemplating or designing a separation process, every chemical engineer at once recognizes the thermodynamic boundary conditions that must be satisfied: when a mixture is continuously processed to yield at least partially purified products, energy and mass must be conserved and work must be done. In his daily tasks, a chemical engineer uses thermodynamic concepts as tacit, almost subconscious, knowledge. Thus, qualitative thermodynamics significantly informs process conception at its most fundamental level. However, quantitative design requires detailed knowledge of thermodynamic relations and physical chemistry. Most process engineers, concerned with flow sheets and economics, cannot easily command that detailed knowledge and therefore it is advantageous for them to maintain close contact with those specialists who do. Quantitative chemical thermodynamics provides an opportunity to evaluate possible separation processes not only because it may give support to the process engineer`s bold imagination but also because, when coupled with molecular models, it can significantly reduce the experimental effort required to determine an optimum choice of process alternatives. Six examples are presented to indicate the application of thermodynamics for conventional and possible future separation processes.

  20. Aggregates from mineral wastes

    Directory of Open Access Journals (Sweden)

    Baic Ireneusz

    2016-01-01

    Full Text Available The problem concerning the growing demand for natural aggregates and the need to limit costs, including transportation from remote deposits, cause the increase in growth of interest in aggregates from mineral wastes as well as in technologies of their production and recovery. The paper presents the issue related to the group of aggregates other than natural. A common name is proposed for such material: “alternative aggregates”. The name seems to be fully justified due to adequacy of this term because of this raw materials origin and role, in comparison to the meaning of natural aggregates based on gravel and sand as well as crushed stones. The paper presents characteristics of the market and basic application of aggregates produced from mineral wastes, generated in the mining, power and metallurgical industries as well as material from demolished objects.

  1. Aggregate and Individual Replication Probability within an Explicit Model of the Research Process

    Science.gov (United States)

    Miller, Jeff; Schwarz, Wolf

    2011-01-01

    We study a model of the research process in which the true effect size, the replication jitter due to changes in experimental procedure, and the statistical error of effect size measurement are all normally distributed random variables. Within this model, we analyze the probability of successfully replicating an initial experimental result by…

  2. Lattice modeling of fracture processes in numerical concrete with irregular shape aggregates

    NARCIS (Netherlands)

    Qian, Z.; Schlangen, H.E.J.G.

    2013-01-01

    The fracture processes in concrete can be simulated by lattice fracture model [1]. A lattice network is usually constructed on top of the material structure of concrete, and then the mechanical properties of lattice elements are assigned, corresponding with the phases they represent. The material st

  3. Supervision over technological and measurement processes

    Directory of Open Access Journals (Sweden)

    T. Karkoszka

    2011-01-01

    Full Text Available Purpose: of the paper has been an attainment of the thesis: “If there is something we can define, we can measure it. If there is something we can measure, we can analyse that. If there is something we can analyse, we can supervise that. If there is something we can supervise, we can improve that [1]”.Design/methodology/approach: used for the analysis has covered proposition of the supervision over measurement processes system that can be applied in quality assurance.Findings: of analysis are as follows: system of supervision over measurement processes performed (in compliance with real, realised in an organisation processes, can assure the achievement of the accurate and reliable results that, being the base of any feedback in any process, have fundamental meaning in making appropriate decisions.Practical implications: can be applied in case of any organisation, wanting to demonstrate the conformity of processes in the range of requirements that apply to: products, workers, natural environment and others by supervision over measurement equipment.Originality/value: of the presented paper has been obtained by working out the design of supervision over measurement system, also measurement system capability, which should be supplement for supervision over processes system in the assurance of processes and products quality.

  4. Process Technology for Immobilized LipaseProcess Technology for Immobilized Lipase-catalyzed

    DEFF Research Database (Denmark)

    Xu, Yuan

    Biocatalysis has attracted significant attention recently, mainly due to its high selectivity and potential benefits for sustainability. Applications can be found in biorefineries, turning biomass into energy and chemicals, and also for products in the food and pharmaceutical industries. However......, most applications remain in the production of high-value fine chemicals, primarily because of the expense of introducing new technology. In particular lipasecatalyzed synthesis has already achieved efficient operations for high-value products and more interesting now is to establish opportunities...... for the production of biodiesel. The two processes are focused on the conversion of the two main components of vegetable oil materials, glyceride esters and free fatty acids respectively, into fatty acid alkyl esters. Although biodiesel is conventionally prepared via chemical-catalyzed transesterification...

  5. Organelle Structures: Bridging Strategy and Technological Processes

    Institute of Scientific and Technical Information of China (English)

    Rob; Dekkers

    2002-01-01

    The shifting requirements as imposed on operations ma nagement require adjusting and tailoring the organisational structure to meet ma rket demands. However, translating these requirements directly into hierarchical structure will not ensure the integration of processes across organisational un its and guarantee desirable performance. Therefore, management and management li terature wonders: · How should we connect processes to the external environment within a strategi c framework · Which organisationa...

  6. Conjoint Management of Business Processes and Information Technologies

    DEFF Research Database (Denmark)

    Siurdyban, Artur

    resulting from systems and process implementations and their corporate-level management aspects. It reports on four case studies of industrial projects representing different perspectives of the studied phenomenon. The first case study pertains to the interdependencies between business processes...... and information technologies in a project environment. It states that both elements are intrinsically related and should be designed and considered together. The second case examines the relationships between information technology management and business process management. It discusses the multi-faceted role...... of technology in supporting process management and proposes four archetypes of process-driven IT/business partnerships. The third case study shows how companies can use technology artifacts in order to improve process management in organizations. It provides a set of recommendations for academics...

  7. On the Benefit of Using Mobile Technologies in Business Processes

    OpenAIRE

    Deibert, Sina; Rothlauf, Franz

    2006-01-01

    The rapid technical progress in the development of mobile devices and technologies offers new possibilities for improving and streamlining the performance of business processes. However, only few successful mobile applications exist in the business area. This paper discusses the benefits an enterprise can gain by using mobile technologies in business processes. It presents general indicators to measure the performance of business processes and shows how these indicators must be adapted to be ...

  8. FY-2010 Process Monitoring Technology Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Bryan, Samuel A.; Casella, Amanda J.; Hines, Wes; Levitskaia, Tatiana G.; henkell, J.; Schwantes, Jon M.; Jordan, Elizabeth A.; Lines, Amanda M.; Fraga, Carlos G.; Peterson, James M.; Verdugo, Dawn E.; Christensen, Ronald N.; Peper, Shane M.

    2011-01-01

    During FY 2010, work under the Spectroscopy-Based Process Monitoring task included ordering and receiving four fluid flow meters and four flow visible-near infrared spectrometer cells to be instrumented within the centrifugal contactor system at Pacific Northwest National Laboratory (PNNL). Initial demonstrations of real-time spectroscopic measurements on cold-stream simulants were conducted using plutonium (Pu)/uranium (U) (PUREX) solvent extraction process conditions. The specific test case examined the extraction of neodymium nitrate (Nd(NO3)3) from an aqueous nitric acid (HNO3) feed into a tri-n-butyl phosphate (TBP)/ n-dodecane solvent. Demonstration testing of this system included diverting a sample from the aqueous feed meanwhile monitoring the process in every phase using the on-line spectroscopic process monitoring system. The purpose of this demonstration was to test whether spectroscopic monitoring is capable of determining the mass balance of metal nitrate species involved in a cross-current solvent extraction scheme while also diverting a sample from the system. The diversion scenario involved diverting a portion of the feed from a counter-current extraction system while a continuous extraction experiment was underway. A successful test would demonstrate the ability of the process monitoring system to detect and quantify the diversion of material from the system during a real-time continuous solvent extraction experiment. The system was designed to mimic a PUREX-type extraction process with a bank of four centrifugal contactors. The aqueous feed contained Nd(NO3)3 in HNO3, and the organic phase was composed of TBP/n-dodecane. The amount of sample observed to be diverted by on-line spectroscopic process monitoring was measured to be 3 mmol (3 x 10-3 mol) Nd3+. This value was in excellent agreement with the 2.9 mmol Nd3+ value based on the known mass of sample taken (i.e., diverted) directly from the system feed solution.

  9. Surface reactions in microelectronics process technology.

    Science.gov (United States)

    Levitin, Galit; Hess, Dennis W

    2011-01-01

    Current integrated circuit (IC) manufacturing consists of more than 800 process steps, nearly all of which involve reactions at surfaces that significantly impact device yield and performance. From initial surface preparation through film deposition, patterning, etching, residue removal, and metallization, an understanding of surface reactions and interactions is critical to the successful continuous scaling, yield, and reliability of electronic devices. In this review, some of the most important surface reactions that drive the development of microelectronic device fabrication are described. The reactions discussed do not constitute comprehensive coverage of this topic in IC manufacture but have been selected to demonstrate the importance of surface/interface reactions and interactions in the development of new materials, processing sequences, and process integration challenges. Specifically, the review focuses on surface reactions related to surface cleaning/preparation, semiconductor film growth, dielectric film growth, metallization, and etching (dry and wet).

  10. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    to create motivating learning for the students. This was done by examining the three actors in the educational institution (students, teachers and the surrounding organisation) individually and relationally. The design-based research project developed knowledge in co-design processes with the three actors......This design-based research project investigates the elements, methods, processes and practices that can contribute to the creation of reflected, innovative and motivating learning designs for teachers and students in a hybrid synchronous video-mediated teaching context, with a focus on how...... about how design and learning processes can support continuous pedagogical innovation and competence development. The objective of the learning designs was to create motivating learning experiences for the students in the hybrid synchronous video-mediated learning environment, to which end...

  11. Process for making unsaturated hydrocarbons using microchannel process technology

    Science.gov (United States)

    Tonkovich, Anna Lee; Yuschak, Thomas; LaPlante, Timothy J.; Rankin, Scott; Perry, Steven T.; Fitzgerald, Sean Patrick; Simmons, Wayne W.; Mazanec, Terry Daymo, Eric

    2011-04-12

    The disclosed invention relates to a process for converting a feed composition comprising one or more hydrocarbons to a product comprising one or more unsaturated hydrocarbons, the process comprising: flowing the feed composition and steam in contact with each other in a microchannel reactor at a temperature in the range from about 200.degree. C. to about 1200.degree. C. to convert the feed composition to the product, the process being characterized by the absence of catalyst for converting the one or more hydrocarbons to one or more unsaturated hydrocarbons. Hydrogen and/or oxygen may be combined with the feed composition and steam.

  12. Integrated modelling in materials and process technology

    DEFF Research Database (Denmark)

    Hattel, Jesper Henri

    2008-01-01

    processes from the viewpoint of combined materials and process modelling are presented: solidification of thin walled ductile cast iron, integrated modelling of spray forming and multiphysics modelling of friction stir welding. The fourth example describes integrated modelling applied to a failure analysis...... of premature rupture of a stellite weld on a P91 valve used in a power plant. For all four examples, the focus is put on modelling results rather than describing the models in detail. Proper comparison with experimental work is given in all examples for model validation as well as relevant references...

  13. Process for separating nitrogen from methane using microchannel process technology

    Science.gov (United States)

    Tonkovich, Anna Lee; Qiu, Dongming; Dritz, Terence Andrew; Neagle, Paul; Litt, Robert Dwayne; Arora, Ravi; Lamont, Michael Jay; Pagnotto, Kristina M.

    2007-07-31

    The disclosed invention relates to a process for separating methane or nitrogen from a fluid mixture comprising methane and nitrogen, the process comprising: (A) flowing the fluid mixture into a microchannel separator, the microchannel separator comprising a plurality of process microchannels containing a sorption medium, the fluid mixture being maintained in the microchannel separator until at least part of the methane or nitrogen is sorbed by the sorption medium, and removing non-sorbed parts of the fluid mixture from the microchannel separator; and (B) desorbing the methane or nitrogen from the sorption medium and removing the desorbed methane or nitrogen from the microchannel separator. The process is suitable for upgrading methane from coal mines, landfills, and other sub-quality sources.

  14. Technology Estimating: A Process to Determine the Cost and Schedule of Space Technology Research and Development

    Science.gov (United States)

    Cole, Stuart K.; Reeves, John D.; Williams-Byrd, Julie A.; Greenberg, Marc; Comstock, Doug; Olds, John R.; Wallace, Jon; DePasquale, Dominic; Schaffer, Mark

    2013-01-01

    NASA is investing in new technologies that include 14 primary technology roadmap areas, and aeronautics. Understanding the cost for research and development of these technologies and the time it takes to increase the maturity of the technology is important to the support of the ongoing and future NASA missions. Overall, technology estimating may help provide guidance to technology investment strategies to help improve evaluation of technology affordability, and aid in decision support. The research provides a summary of the framework development of a Technology Estimating process where four technology roadmap areas were selected to be studied. The framework includes definition of terms, discussion for narrowing the focus from 14 NASA Technology Roadmap areas to four, and further refinement to include technologies, TRL range of 2 to 6. Included in this paper is a discussion to address the evaluation of 20 unique technology parameters that were initially identified, evaluated and then subsequently reduced for use in characterizing these technologies. A discussion of data acquisition effort and criteria established for data quality are provided. The findings obtained during the research included gaps identified, and a description of a spreadsheet-based estimating tool initiated as a part of the Technology Estimating process.

  15. Gasification — the process and the technology

    NARCIS (Netherlands)

    Swaaij, van W.P.M.

    1981-01-01

    Thermochemical gasification of biomass can produce low, medium and high calorific value gases. The characteristics, applications and potential of the different processes and reactor types are discussed. The introduction of biomass gasification on a large or intermediate scale for the production of p

  16. Food Processing: Technology and Nutritive Value.

    Science.gov (United States)

    Gerbouin-Rerolle, Pascale

    1993-01-01

    This booklet examines the principles of food preservation, food preservation techniques, and nutrition-related consequences of food processing. All foodstuffs in their natural state will deteriorate and become unfit for human consumption due to internal factors, such as enzyme activity, or external factors, such as insects, rodents, and…

  17. FEATURES OF USING AUGMENTED REALITY TECHNOLOGY TO SUPPORT EDUCATIONAL PROCESSES

    Directory of Open Access Journals (Sweden)

    Yury A. Kravchenko

    2014-01-01

    Full Text Available The paper discusses the concept and technology of augmented reality, the rationale given the relevance and timeliness of its use to support educational processes. Paper is a survey and study of the possibility of using augmented reality technology in education. Architecture is proposed and constructed algorithms of the software system management QR-codes media objects. An overview of the features and uses of augmented reality technology to support educational processes is displayed, as an option of a new form of visual demonstration of complex objects, models and processes

  18. Innovative Pedagogical Processes Involving Educational Technology

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    it experimented with gamified learning designs. This involved the students designing digital games while implementing learning goals from their curriculum. The project thus created knowledge about which learning designs and competence development models were possible in this environment, which learning designs......This design-based research project investigates the elements, methods, processes and practices that can contribute to the creation of reflected, innovative and motivating learning designs for teachers and students in a hybrid synchronous video-mediated teaching context, with a focus on how...... to create motivating learning for the students. This was done by examining the three actors in the educational institution (students, teachers and the surrounding organisation) individually and relationally. The design-based research project developed knowledge in co-design processes with the three actors...

  19. Status and prospect of radiation processing technology in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Khairul Zaman Hj. Mohd Dahlan; Nahrul Khair Alang Md Rashid [Malaysian Institute for Nuclear Technology Research (MINT), Bangi, Selangor Darul Ehsan (Malaysia)

    2001-03-01

    Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

  20. APPLICATION OF CLOUD TECHNOLOGY IN THE STOMATOLOGISTS EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Oksana A. Zorina

    2016-01-01

    Full Text Available Study the possibility of applying cloud technologies for the control of knowledge and the certification of specialists has been studied in the framework of realization of educational programs of internship and residency training in dental specialties. It was found that the management of the educational process in online mode is possible on the basis of distance education technologies using cloud technology

  1. Cathepsin D expression level affects alpha-synuclein processing, aggregation, and toxicity in vivo

    Directory of Open Access Journals (Sweden)

    Cullen Valerie

    2009-02-01

    Full Text Available Abstract Background Elevated SNCA gene expression and intracellular accumulation of the encoded α-synuclein (aSyn protein are associated with the development of Parkinson disease (PD. To date, few enzymes have been examined for their ability to degrade aSyn. Here, we explore the effects of CTSD gene expression, which encodes the lysosomal protease cathepsin D (CathD, on aSyn processing. Results Over-expression of human CTSD cDNA in dopaminergic MES23.5 cell cultures induced the marked proteolysis of exogenously expressed aSyn proteins in a dose-dependent manner. Unexpectedly, brain extractions, Western blotting and ELISA quantification revealed evidence for reduced levels of soluble endogenous aSyn in ctsd knock-out mice. However, these CathD-deficient mice also contained elevated levels of insoluble, oligomeric aSyn species, as detected by formic acid extraction. In accordance, immunohistochemical studies of ctsd-mutant brain from mice, sheep and humans revealed selective synucleinopathy-like changes that varied slightly among the three species. These changes included intracellular aSyn accumulation and formation of ubiquitin-positive inclusions. Furthermore, using an established Drosophila model of human synucleinopathy, we observed markedly enhanced retinal toxicity in ctsd-null flies. Conclusion We conclude from these complementary investigations that: one, CathD can effectively degrade excess aSyn in dopaminergic cells; two, ctsd gene mutations result in a lysosomal storage disorder that includes microscopic and biochemical evidence of aSyn misprocessing; and three, CathD deficiency facilitates aSyn toxicity. We therefore postulate that CathD promotes 'synucleinase' activity, and that enhancing its function may lower aSyn concentrations in vivo.

  2. 5th Conference on Aerospace Materials, Processes, and Environmental Technology

    Science.gov (United States)

    Cook, M. B. (Editor); Stanley, D. Cross (Editor)

    2003-01-01

    Records are presented from the 5th Conference on Aerospace Materials, Processes, and Environmental Technology. Topics included pollution prevention, inspection methods, advanced materials, aerospace materials and technical standards,materials testing and evaluation, advanced manufacturing,development in metallic processes, synthesis of nanomaterials, composite cryotank processing, environmentally friendly cleaning, and poster sessions.

  3. Research on Implementing Big Data: Technology, People, & Processes

    Science.gov (United States)

    Rankin, Jenny Grant; Johnson, Margie; Dennis, Randall

    2015-01-01

    When many people hear the term "big data", they primarily think of a technology tool for the collection and reporting of data of high variety, volume, and velocity. However, the complexity of big data is not only the technology, but the supporting processes, policies, and people supporting it. This paper was written by three experts to…

  4. Impact on technology transfer innovation processes: Ukrainian and foreign experience

    Directory of Open Access Journals (Sweden)

    Halyna Nahornyak

    2013-11-01

    Full Text Available The paper identified and reasonably effective mechanisms for technology transfer in Ukraine and several foreign countries. The analysis of the national and international technology transfer. It is shown that based on the experience of the transfer of innovative technologies in foreign countries, the priority areas of the state scientific and technical policy is to create conditions for innovation-based economic development and structural adjustment of industrial and technological sectors. The development of legislation affecting science and technology and innovation activity in Ukraine. Comparison of statistical data on the innovation process in the European Union and Ukraine. Investigated the technical and technological production in Ukraine, as well as the factors that hinder the development of innovations in the industry. Found effective mechanisms for technology transfer in foreign countries (USA, Germany, Japan, Russia. The role of technology transfer centres, public-private partnerships, long-term leasing of equipment, government contracts, the introduction of tax incentives to enterprises that carry out upgrading and development of new technologies. An effective means of technology transfer that will enhance innovation processes of enterprises in the innovation economy type.

  5. A Functional Reference Architecture for Aggregators

    DEFF Research Database (Denmark)

    Bondy, Daniel Esteban Morales; Heussen, Kai; Gehrke, Oliver;

    2015-01-01

    Aggregators are considered to be a key enabling technology for harvesting power system services from distributed energy resources (DER). As a precondition for more widespread use of aggregators in power systems, methods for comparing and validating aggregator designs must be established. This paper...... proposes a functional reference architecture for aggregators to address this requirement....

  6. Web Based Technologies to Support High Level Process Maturity

    Directory of Open Access Journals (Sweden)

    A. V. Sharmila

    2013-07-01

    Full Text Available This paper discusses the uses of Web based Technologies to support High Level Process Maturity in an organization. It also provides an overview of CMMI, focusing on the importance of centralized data storage and data access for sustaining high maturity levels of CMMI. Further, elaboration is made on the web based technology, stressing that change over to Web Based Application is extremely helpful to maintain the centralized data repository, to collect data for process capability baseline, and to track process performance management, with reduced maintenance effort and ease of data access. A case study analysis of advantages of adopting Web Based Technology is also narrated. Finally the paper concludes that the sustenance of High level Process maturity can be achieved by adopting web application technology.

  7. Aggregation and Averaging.

    Science.gov (United States)

    Siegel, Irving H.

    The arithmetic processes of aggregation and averaging are basic to quantitative investigations of employment, unemployment, and related concepts. In explaining these concepts, this report stresses need for accuracy and consistency in measurements, and describes tools for analyzing alternative measures. (BH)

  8. Protein Colloidal Aggregation Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J. (Compiler)

    2014-01-01

    To investigate the pathways and kinetics of protein aggregation to allow accurate predictive modeling of the process and evaluation of potential inhibitors to prevalent diseases including cataract formation, chronic traumatic encephalopathy, Alzheimer's Disease, Parkinson's Disease and others.

  9. Dry process fuel performance technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Kweon Ho; Kim, K. W.; Kim, B. K. (and others)

    2006-06-15

    The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase III R and D. In order to fulfil this objectives, property model development of DUPIC fuel and irradiation test was carried out in Hanaro using the instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase III are summarized as follows: Fabrication process establishment of simulated DUPIC fuel for property measurement, Property model development for the DUPIC fuel, Performance evaluation of DUPIC fuel via irradiation test in Hanaro, Post irradiation examination of irradiated fuel and performance analysis, Development of DUPIC fuel performance code (KAOS)

  10. Environmentalism and natural aggregate mining

    Science.gov (United States)

    Drew, L.J.; Langer, W.H.; Sachs, J.S.

    2002-01-01

    Sustaining a developed economy and expanding a developing one require the use of large volumes of natural aggregate. Almost all human activity (commercial, recreational, or leisure) is transacted in or on facilities constructed from natural aggregate. In our urban and suburban worlds, we are almost totally dependent on supplies of water collected behind dams and transported through aqueducts made from concrete. Natural aggregate is essential to the facilities that produce energy-hydroelectric dams and coal-fired powerplants. Ironically, the utility created for mankind by the use of natural aggregate is rarely compared favorably with the environmental impacts of mining it. Instead, the empty quarries and pits are seen as large negative environmental consequences. At the root of this disassociation is the philosophy of environmentalism, which flavors our perceptions of the excavation, processing, and distribution of natural aggregate. The two end-member ideas in this philosophy are ecocentrism and anthropocentrism. Ecocentrism takes the position that the natural world is a organism whose arteries are the rivers-their flow must not be altered. The soil is another vital organ and must not be covered with concrete and asphalt. The motto of the ecocentrist is "man must live more lightly on the land." The anthropocentrist wants clean water and air and an uncluttered landscape for human use. Mining is allowed and even encouraged, but dust and noise from quarry and pit operations must be minimized. The large volume of truck traffic is viewed as a real menace to human life and should be regulated and isolated. The environmental problems that the producers of natural aggregate (crushed stone and sand and gravel) face today are mostly difficult social and political concerns associated with the large holes dug in the ground and the large volume of heavy truck traffic associated with quarry and pit operations. These concerns have increased in recent years as society's demand for

  11. Consumer Value perceptions of food products from emerging processing technologies

    DEFF Research Database (Denmark)

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    2015-01-01

    in the eyes of consumers, in two culturally variant contexts, namely a Western society where technology is often met with skepticism (i.e., the UK); and a non-Western society where technology plays a reassuring role regarding concerns about food safety and quality (i.e., China). Results reveal that the most...... attitudes towards technological progress would differ in the number and type of value–cost dimensions that define their CV trade-offs. Finally, a between-countries comparison revealed that counter-technology consumers in both cultural contexts share more value and cost perceptions than their pro......-technology counterparts, who ‘allow’ more room for cultural discrepancies to impact on their CV perceptions. Overall, findings support the view that CV perceptions in the context of food produced by means of emerging processing technologies can be successfully analyzed using a multidimensional conceptualization, where CV...

  12. Product and process understanding to relate the effect of freezing method on glycation and aggregation of lyophilized monoclonal antibody formulations.

    Science.gov (United States)

    Awotwe-Otoo, David; Agarabi, Cyrus; Read, Erik K; Lute, Scott; Brorson, Kurt A; Khan, Mansoor A

    2015-07-25

    The objective of the study was to analyze the effect of controlled and uncontrolled freezing step of a lyophilization process on the extent of non-enzymatic glycation and aggregation of an IgG1 formulation at two concentrations (1mg/ml and 20mg/ml). The degree of glycation (%) was determined through boronate affinity chromatography and its effect on the formation of soluble aggregates and higher molecular weight species was studied using dynamic light scattering (DLS) and size exclusion chromatography with multi-angle light scattering (SEC-MALS). The effect of non-enzymatic glycation on the secondary structure of the formulations was also studied using circular dichroism (CD) spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. Results indicated that controlled nucleation yielded higher residual moisture contents and significantly lower specific surface areas for the two monoclonal antibody concentrations compared with uncontrolled nucleation cycle (p<0.05). For the two concentrations, uncontrolled nucleation resulted in significantly higher levels of glycation compared with controlled nucleation samples (p<0.05). Further, it was observed that higher storage temperatures (25°C/60% RH) versus 5°C resulted in higher glycation. Even though SEC-MALS analyses of the low concentrated formulations did not reveal the formation of higher molecular weight species, DLS analyses at two storage conditions revealed increases in the hydrodynamic radii and polydispersity index of the reconstituted formulations, suggesting the onset of formation of smaller species in the formulations. CD spectroscopy did not reveal any differences in the secondary structure of the mAb for the two concentrations after lyophilization. In conclusion, the freezing step method impacted the extent of glycation in lyophilized samples and the hydrolyzed component of sucrose was critical for increasing glycation. Even though some level of glycation was observed in lyophilized samples, the

  13. The latest progress in research of plastics processing technology

    Institute of Scientific and Technical Information of China (English)

    Qu Jinping

    2012-01-01

    According to the great demand for the" green" plastics processing technology of the low energy consumption, high efficiency and environmental protection in plastics industry, the plastics processing method and technology based on the elongation rheology, with continuing evolution and innovation of the plastics plasticating and conveying method, are presented and researched on the basis of the plastics dynamic processing method arid equipment, and the plastics plasticating and conveying process in the vane extrusion system, the technical characteristics and the applications of vane plasticating and conveying technology are discussed. The research results show that compared with the conventional processing equipment, this new technology and equipment shows many outstanding advantages, such as shortening the thermo-meehanical history of the plastics processing by more than 50 % , reducing the energy consumption by 30 % or so, improving the mixing and blending effects, improving the quality of the products and the adaptability to materials, etc. , and it is found that the new technology and equipment has special superiority in the fields of the processing for material systems, such as the multiphase and multicomponent composite materials, the shear heat sensitive macromolecular materials, etc.

  14. Prediction of Increasing Production Activities using Combination of Query Aggregation on Complex Events Processing and Neural Network

    Directory of Open Access Journals (Sweden)

    Achmad Arwan

    2016-07-01

    Full Text Available AbstrakProduksi, order, penjualan, dan pengiriman adalah serangkaian event yang saling terkait dalam industri manufaktur. Selanjutnya hasil dari event tersebut dicatat dalam event log. Complex Event Processing adalah metode yang digunakan untuk menganalisis apakah terdapat pola kombinasi peristiwa tertentu (peluang/ancaman yang terjadi pada sebuah sistem, sehingga dapat ditangani secara cepat dan tepat. Jaringan saraf tiruan adalah metode yang digunakan untuk mengklasifikasi data peningkatan proses produksi. Hasil pencatatan rangkaian proses yang menyebabkan peningkatan produksi digunakan sebagai data latih untuk mendapatkan fungsi aktivasi dari jaringan saraf tiruan. Penjumlahan hasil catatan event log dimasukkan ke input jaringan saraf tiruan untuk perhitungan nilai aktivasi. Ketika nilai aktivasi lebih dari batas yang ditentukan, maka sistem mengeluarkan sinyal untuk meningkatkan produksi, jika tidak, sistem tetap memantau kejadian. Hasil percobaan menunjukkan bahwa akurasi dari metode ini adalah 77% dari 39 rangkaian aliran event.Kata kunci: complex event processing, event, jaringan saraf tiruan, prediksi peningkatan produksi, proses. AbstractProductions, orders, sales, and shipments are series of interrelated events within manufacturing industry. Further these events were recorded in the event log. Complex event processing is a method that used to analyze whether there are patterns of combinations of certain events (opportunities / threats that occur in a system, so it can be addressed quickly and appropriately. Artificial neural network is a method that we used to classify production increase activities. The series of events that cause the increase of the production used as a dataset to train the weight of neural network which result activation value. An aggregate stream of events inserted into the neural network input to compute the value of activation. When the value is over a certain threshold (the activation value results

  15. Production of aggregation prone human interferon gamma and its mutant in highly soluble and biologically active form by SUMO fusion technology.

    Science.gov (United States)

    Tileva, M; Krachmarova, E; Ivanov, I; Maskos, K; Nacheva, G

    2016-01-01

    The Escherichia coli expression system is a preferable choice for production of recombinant proteins. A disadvantage of this system is the target protein aggregation in "inclusion bodies" (IBs) that further requires solubilisation and refolding, which is crucial for the properties and the yield of the final product. In order to prevent aggregation, SUMO fusion tag technology has been successfully applied for expression of eukaryotic proteins, including human interferon gamma (hIFNγ) that was reported, however, with no satisfactory biological activity. We modified this methodology for expression and purification of both the wild type hIFNγ and an extremely prone to aggregation mutant hIFNγ-K88Q, whose recovery from IBs showed to be ineffective upon numerous conditions. By expression of the N-terminal His-SUMO fusion proteins in the E. coli strain BL21(DE3)pG-KJE8, co-expressing two chaperone systems, at 24 °C a significant increase in solubility of both target proteins (1.5-fold for hIFNγ and 8-fold for K88Q) was achieved. Two-step chromatography (affinity and ion-exchange) with on-dialysis His-SUMO-tag cleavage was applied for protein purification that yielded 6.0-7.0mg/g wet biomass for both proteins with >95% purity and native N-termini. The optimised protocol led to increased yields from 5.5 times for hIFNγ up to 100 times for K88Q in comparison to their isolation from IBs. Purified hIFNγ showed preserved thermal stability and antiproliferative activity corresponding to that of the native reference sample (3 × 10(7)IU/mg). The developed methodology represents an optimised procedure that can be successfully applied for large scale expression and purification of aggregation-prone proteins in soluble native form.

  16. Modeling statistics and kinetics of the natural aggregation structures and processes with the solution of generalized logistic equation

    Science.gov (United States)

    Maslov, Lev A.; Chebotarev, Vladimir I.

    2017-02-01

    The generalized logistic equation is proposed to model kinetics and statistics of natural processes such as earthquakes, forest fires, floods, landslides, and many others. This equation has the form dN(A)/dA = s dot (1-N(A)) dot N(A)q dot A-α, q>0q>0 and A>0A>0 is the size of an element of a structure, and α≥0. The equation contains two exponents α and q taking into account two important properties of elements of a system: their fractal geometry, and their ability to interact either to enhance or to damp the process of aggregation. The function N(A)N(A) can be understood as an approximation to the number of elements the size of which is less than AA. The function dN(A)/dAdN(A)/dA where N(A)N(A) is the general solution of this equation for q=1 is a product of an increasing bounded function and power-law function with stretched exponential cut-off. The relation with Tsallis non-extensive statistics is demonstrated by solving the generalized logistic equation for q>0q>0. In the case 01q>1 it models sub-additive structures. The Gutenberg-Richter (G-R) formula results from interpretation of empirical data as a straight line in the area of stretched exponent with small α. The solution is applied for modeling distribution of foreshocks and aftershocks in the regions of Napa Valley 2014, and Sumatra 2004 earthquakes fitting the observed data well, both qualitatively and quantitatively.

  17. A Strategic Science and Technology Planning and Development Process Model

    Science.gov (United States)

    2005-02-01

    developed process model to the research and technology initiatives of the U.S. Army Tank-Automotive Research, Development and Engineering Center...action teams were formed (under change management sponsorship of a champion) to formulate and implement an improved process model considered essential

  18. Modeling Recycling Asphalt Pavement Processing Technologies in Asphalt Mixing Plants

    OpenAIRE

    Simonas Tamaliūnas; Henrikas Sivilevičius

    2011-01-01

    The article presents reclaimed asphalt pavement (RAP) processing technologies and equipment models used in the asphalt mixing plant (AMP). The schematic model indicating all possible ways to process RAP in AMP is shown. The model calculating the needed temperature of mineral materials used for heating RAP is given and an example of such calculation is provided.Article in Lithuanian

  19. Modeling Recycling Asphalt Pavement Processing Technologies in Asphalt Mixing Plants

    Directory of Open Access Journals (Sweden)

    Simonas Tamaliūnas

    2011-04-01

    Full Text Available The article presents reclaimed asphalt pavement (RAP processing technologies and equipment models used in the asphalt mixing plant (AMP. The schematic model indicating all possible ways to process RAP in AMP is shown. The model calculating the needed temperature of mineral materials used for heating RAP is given and an example of such calculation is provided.Article in Lithuanian

  20. Mobile Technology and CAD Technology Integration in Teaching Architectural Design Process for Producing Creative Product

    Science.gov (United States)

    Bin Hassan, Isham Shah; Ismail, Mohd Arif; Mustafa, Ramlee

    2011-01-01

    The purpose of this research is to examine the effect of integrating the mobile and CAD technology on teaching architectural design process for Malaysian polytechnic architectural students in producing a creative product. The website is set up based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

  1. Security of carrier aggregation technology in LTE-Advanced system%LTE-Advanced系统中载波聚合技术的安全研究

    Institute of Scientific and Technical Information of China (English)

    吴义壮; 艾渤; 钟章队

    2012-01-01

    The carrier aggregation technology used in LTE-Advanced system is introduced in this paper. The challenges it brings to the security of Long Term Evolution-Advanced(LTE-Advanced) system are discussed. Based on the recent standard of carrier aggregation technology by 3GPP, the security requirements are presented and the corresponding solutions are provided according to the security scheme of LTE system.%主要分析了LTE-Advanced系统中引入载波聚合技术带来的安全需求,并提出了解决方案.载波聚合技术是LTE-Advanced系统的一个关键技术,它的应用给系统安全带来了新的挑战.文章基于3GPP组织关于载波聚合技术制定的相关标准,对载波聚合技术进行了阐述和分析,根据LTE系统的安全实现方案提出了载波聚合场景下的安全解决方案.

  2. Computational molecular technology towards macroscopic chemical phenomena-molecular control of complex chemical reactions, stereospecificity and aggregate structures

    Energy Technology Data Exchange (ETDEWEB)

    Nagaoka, Masataka [Graduate School of Information Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8601 (Japan); Core Research for Evolutional Science and Technology (CREST), Japan Science and Technology Agency (JST), Honmachi, Kawaguchi 332-0012 (Japan); ESICB, Kyoto University, Kyodai Katsura, Nishikyo-ku, Kyoto 615-8520 (Japan)

    2015-12-31

    A new efficient hybrid Monte Carlo (MC)/molecular dynamics (MD) reaction method with a rare event-driving mechanism is introduced as a practical ‘atomistic’ molecular simulation of large-scale chemically reactive systems. Starting its demonstrative application to the racemization reaction of (R)-2-chlorobutane in N,N-dimethylformamide solution, several other applications are shown from the practical viewpoint of molecular controlling of complex chemical reactions, stereochemistry and aggregate structures. Finally, I would like to mention the future applications of the hybrid MC/MD reaction method.

  3. Radiant-and-plasma technology for coal processing

    OpenAIRE

    Vladimir Messerle; Alexander Ustimenko

    2012-01-01

    Radiant-and-plasma technology for coal processing is presented in the article. Thermodynamic computation and experiments on plasma processing of bituminous coal preliminary electron-beam activated were fulfilled in comparison with plasma processing of the coal. Positive influence of the preliminary electron-beam activation of coal on synthesis gas yield was found. Experiments were carried out in the plasma gasifier of 100 kW power. As a result of the measurements of material and heat balance ...

  4. Process technology activities at the Software Engineering Institute

    Energy Technology Data Exchange (ETDEWEB)

    Christie, A.M. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    1996-12-31

    This paper provides a brief overview of the rationale for, and direction of the software process technology work being pursued at the Software Engineering Institute. The paper then describes some of the activities that the SEI has recently been involved in. Finally, it relates in more detail an example of one specific effort; namely the development of a process modeling formalism and its use in process simulation.

  5. Hybrid microcircuit technology handbook materials, processes, design, testing and production

    CERN Document Server

    Licari, James J

    1998-01-01

    The Hybrid Microcircuit Technology Handbook integrates the many diverse technologies used in the design, fabrication, assembly, and testing of hybrid segments crucial to the success of producing reliable circuits in high yields. Among these are: resistor trimming, wire bonding, die attachment, cleaning, hermetic sealing, and moisture analysis. In addition to thin films, thick films, and assembly processes, important chapters on substrate selections, handling (including electrostatic discharge), failure analysis, and documentation are included. A comprehensive chapter of design guidelines will

  6. Army Information Technology Procurement: A Business Process Analysis

    Science.gov (United States)

    2015-03-27

    IG – Inspector General IT – Information Technology ITIL – Information Technology Infrastructure Library JCA – Joint Capability Area MDEP...Library® ( ITIL ®, 2012), is an IT industry standard set of practices that focuses primarily on providing and managing IT services. This research will...consider how ITIL best practices for knowledge management and IT operations management processes may provide value to the Army construct. The U.S

  7. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  8. Advances in fntd technology: Instrumentation, image processing and applications

    Science.gov (United States)

    Bartz, James Andrew

    Fluorescent Nuclear Track Detectors (FNTDs), based on Al2O 3:C,Mg single crystal material, enable diffraction limited imaging of ionization patterns. This fast, luminescent material is thermally and optically stable. This work expands and assesses the capability of FNTD technology to measure radiation dose quickly and accurately, especially neutron radition. Developments in FNTD instrumentation, software, image reconstruction, image processing and data processing improved ease of use, productivity and reliability and brought the technology into commercial viability. Descriptions of these developments are presented. Additionally, these developments were assessed and were found to comply with ANSI and ISO standards for personnel neutron dosimetry. (Abstract shortened by ProQuest.).

  9. Applications of ultrasound in food technology: Processing, preservation and extraction.

    Science.gov (United States)

    Chemat, Farid; Zill-e-Huma; Khan, Muhammed Kamran

    2011-07-01

    Ultrasound is well known to have a significant effect on the rate of various processes in the food industry. Using ultrasound, full reproducible food processes can now be completed in seconds or minutes with high reproducibility, reducing the processing cost, simplifying manipulation and work-up, giving higher purity of the final product, eliminating post-treatment of waste water and consuming only a fraction of the time and energy normally needed for conventional processes. Several processes such as freezing, cutting, drying, tempering, bleaching, sterilization, and extraction have been applied efficiently in the food industry. The advantages of using ultrasound for food processing, includes: more effective mixing and micro-mixing, faster energy and mass transfer, reduced thermal and concentration gradients, reduced temperature, selective extraction, reduced equipment size, faster response to process extraction control, faster start-up, increased production, and elimination of process steps. Food processes performed under the action of ultrasound are believed to be affected in part by cavitation phenomena and mass transfer enhancement. This review presents a complete picture of current knowledge on application of ultrasound in food technology including processing, preservation and extraction. It provides the necessary theoretical background and some details about ultrasound the technology, the technique, and safety precautions. We will also discuss some of the factors which make the combination of food processing and ultrasound one of the most promising research areas in the field of modern food engineering.

  10. Multi-Dimensional Aggregation for Temporal Data

    DEFF Research Database (Denmark)

    Böhlen, M. H.; Gamper, J.; Jensen, Christian Søndergaard

    2006-01-01

    when the data hold. In temporal databases, intervals typically capture the states of reality that the data apply to, or capture when the data are, or were, part of the current database state. This paper proposes a new aggregation operator that addresses several challenges posed by interval data. First......Business Intelligence solutions, encompassing technologies such as multi-dimensional data modeling and aggregate query processing, are being applied increasingly to non-traditional data. This paper extends multi-dimensional aggregation to apply to data with associated interval values that capture......, the intervals to be associated with the result tuples may not be known in advance, but depend on the actual data. Such unknown intervals are accommodated by allowing result groups that are specified only partially. Second, the operator contends with the case where an interval associated with data expresses...

  11. Fundamentals of electroheat electrical technologies for process heating

    CERN Document Server

    Lupi, Sergio

    2017-01-01

    This book provides a comprehensive overview of the main electrical technologies for process heating, which tend to be treated separately in specialized books. Individual chapters focus on heat transfer, electromagnetic fields in electro-technologies, arc furnaces, resistance furnaces, direct resistance heating, induction heating, and high-frequency and microwave heating. The authors highlight those topics of greatest relevance to a wide-ranging teaching program, and at the same time offer a detailed review of the main applications of the various technologies. The content represents a synthesis of the extensive knowledge and experience that the authors have accumulated while researching and teaching at the University of Padua’s Engineering Faculty. This text on industrial electroheating technologies is a valuable resource not only for students of industrial, electrical, chemical, and material science engineering, but also for engineers, technicians and others involved in the application of electroheating and...

  12. Process technology for multi-enzymatic reaction systems

    DEFF Research Database (Denmark)

    Xue, Rui; Woodley, John M.

    2012-01-01

    synthesis and fermentation as an alternative to chemical-catalysis for the production of pharmaceuticals and fine chemicals. In particular, the use of multiple enzymes is of special interest. However, many challenges remain in the scale-up of a multi-enzymatic system. This review summarizes and discusses...... the technology options and strategies that are available for the development of multi-enzymatic processes. Some engineering tools, including kinetic models and operating windows, for developing and evaluating such processes are also introduced....

  13. Optimization of Processing Technology of Compound Dandelion Wine

    OpenAIRE

    Wu Jixuan; Sun Guangren; Cao Xiuli; Han Yuting; Sun Xuesong; Zhang Huan; Zhang Lei; Dang Ataer

    2016-01-01

    Exploring dandelion food has been the concern in fields of the food processing and pharmaceutical industry for playing exact curative effect on high-fat-diet induced hepatic steatosis and diuretic activity. Few dandelion foods including drinks and microencapsulation were explored and unilateral dandelion wine were less carried out for its bitter flavour. In tis paper, to optimize the processing technologies of fermented compound wine from dandelion root, the orthogonal experiment design metho...

  14. Microscale technology and biocatalytic processes: Opportunities and challenges for synthesis

    DEFF Research Database (Denmark)

    Wohlgemuth, Roland; Plazl, Igor; Žnidaršič-Plazl, Polona

    2015-01-01

    Despite the expanding presence of microscale technology in chemical synthesis and energy production as well as in biomedical devices and analytical and diagnostic tools, its potential in biocatalytic processes for pharmaceutical and fine chemicals, as well as related industries, has not yet been ......, and the future outlook for the implementation of these key green engineering methods and the role of supporting tools such as mathematical models to establish sustainable production processes are discussed....

  15. Hierarchical organization in aggregates of protein molecules

    DEFF Research Database (Denmark)

    Bohr, Henrik; Kyhle, Anders; Sørensen, Alexis Hammer

    1997-01-01

    The aggregation of proteins into small clusters is studied by atomic force and electron microscopy. Scaling laws and fractal behaviour in the growth of the aggregates and in the correlation between aggregates is seen. A phase diagram of the aggregation process where the protonic concentration...

  16. Membrane technology in production of biofuels : tried-and-tested technology improves new biofuel processes

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2010-07-15

    Membrane filtration technology, long used in many industrial process streams, is now being adopted in biofuels production and integrated biorefineries, particularly in second generation cellulosic ethanol processes. Second-generation bio-ethanol processes seek to optimize fuel recovery and secondary products from the feedstock and obtain a better value fuel. Membranes are being used to improve bioprocesses, lower energy costs, and increase product recovery. Membranes are engineered physical barriers used in processes for liquid/liquid and liquid/solid separation, permitting the passage of materials only up to a certain size, shape, or character. In biodiesel processes, membranes are being increasingly used to facilitate water reuse. The technology is being explored for use in the production of organic acids, which can form the base for biodegradable plastics. Integrated biorefineries are using microfiltration, ultrafiltration, nanofiltration, and reverse osmosis. Membranes are being used in fermentation with mesophilic and thermophilic organisms to produce biofuels and organic and amino acids. Membrane technology is low cost relative to using evaporators for recovering or removing water, and it is promising for continuous fermentation, as it helps retain microbial biomass in the fermenter while allowing liquid to be drawn out continuously. Membrane technology developed for use at wastewater treatment plants is being applied in biodiesel production, which produces wash water that is high in contaminants. Membrane technology is part of a wave of biofuel research and demonstration plants.

  17. A review on the process technology for Mo-99 production

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Hoh; Yoo, Jae Hyung; Jung, Won Myung; Lee, Kyoo Il; Woo, Moon Sik; Hwang, Doo Sung; Kim, Yun Koo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    Tc-99m is most frequently used in nuclear medical diagnostics because of its favourable nuclear properties and reasonable prices, and the demand of Tc-99m, is on the increase recently. Mo-99, the parent radionuclide of Tc-99m, is the only source of Tc-99m. This review described overall aspects of process technologies for Mo-99 production. Firstly, the chemical, physical and radioactive properties of Tc-99m, Mo-99 were examined to understand Mo-99 separation process. Also, the technology for Mo-99 production with both the neutron capture and nuclear fission method were examined. But the neutron capture method was scarcely used for large production of Mo-99 because of its low specific activity and high production cost. This review also described mainly process technologies in the nuclear fission method, fabrication and condition for irradiation of targets, transport and dissolution of targets irradiated, separation and purification of Mo-99, etc. Especially, for Mo-99 separation and purification process, the characteristics, merits and demerits of various processes, which have been developed in a few countries, were examined and analyzed. 30 figs., 16 tabs., 60 refs. (Author).

  18. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Science.gov (United States)

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  19. Modeling, Learning, and Processing of Text Technological Data Structures

    CERN Document Server

    Kühnberger, Kai-Uwe; Lobin, Henning; Lüngen, Harald; Storrer, Angelika; Witt, Andreas

    2012-01-01

    Researchers in many disciplines have been concerned with modeling textual data in order to account for texts as the primary information unit of written communication. The book “Modelling, Learning and Processing of Text-Technological Data Structures” deals with this challenging information unit. It focuses on theoretical foundations of representing natural language texts as well as on concrete operations of automatic text processing. Following this integrated approach, the present volume includes contributions to a wide range of topics in the context of processing of textual data. This relates to the learning of ontologies from natural language texts, the annotation and automatic parsing of texts as well as the detection and tracking of topics in texts and hypertexts. In this way, the book brings together a wide range of approaches to procedural aspects of text technology as an emerging scientific discipline.

  20. Technology and equipment for processing diamond materials of modern electronics

    Directory of Open Access Journals (Sweden)

    Mityagin A. Yu.

    2009-02-01

    Full Text Available The methods of selection and sorting of diamonds according to their physical properties by modern physical methods of the analysis are developed, as well as the technologies of precision laser cutting of diamonds, their processing on a basis of thermochemical reactions in gas environment. The experimental installation for polishing and grinding of diamond plates, installation for slicing, installation for plasma-chemical processing are created. The techniques of surface roughness measurement of the processed plates and control of roughness parameters are developed. Some experimental results are given.

  1. Introduction of Virtualization Technology to Multi-Process Model Checking

    Science.gov (United States)

    Leungwattanakit, Watcharin; Artho, Cyrille; Hagiya, Masami; Tanabe, Yoshinori; Yamamoto, Mitsuharu

    2009-01-01

    Model checkers find failures in software by exploring every possible execution schedule. Java PathFinder (JPF), a Java model checker, has been extended recently to cover networked applications by caching data transferred in a communication channel. A target process is executed by JPF, whereas its peer process runs on a regular virtual machine outside. However, non-deterministic target programs may produce different output data in each schedule, causing the cache to restart the peer process to handle the different set of data. Virtualization tools could help us restore previous states of peers, eliminating peer restart. This paper proposes the application of virtualization technology to networked model checking, concentrating on JPF.

  2. Pellet manufacturing by extrusion-spheronization using process analytical technology

    DEFF Research Database (Denmark)

    Sandler, Niklas; Rantanen, Jukka; Heinämäki, Jyrki;

    2005-01-01

    The aim of this study was to investigate the phase transitions occurring in nitrofurantoin and theophylline formulations during pelletization by extrusion-spheronization. An at-line process analytical technology (PAT) approach was used to increase the understanding of the solid-state behavior...... hydrate (nitrofurantoin), dehydration was observed at higher temperatures. To reach an understanding of the process and to find the critical process parameters, the use of complementary analytical techniques are absolutely necessary when signals from APIs and different excipients overlap each other....

  3. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

    Science.gov (United States)

    Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

    2016-05-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

  4. Crystallization processes in pharmaceutical technology and drug delivery design

    Science.gov (United States)

    Shekunov, B. Yu; York, P.

    2000-04-01

    Crystallization is a major technological process for particle formation in pharmaceutical industry and, in addition, plays an important role in defining the stability and drug release properties of the final dosage forms. Industrial and regulatory aspects of crystallization are briefly reviewed with reference to solid-state properties of pharmaceuticals. Crystallization, incorporating wider definition to include precipitation and solid-state transitions, is considered in terms of preparation of materials for direct compression, formation of amorphous, solvated and polymorphic forms, chiral separation of drugs, production of materials for inhalation drug delivery and injections. Finally, recent developments in supercritical fluid particle technology is considered in relationship to the areas discussed.

  5. TECHNOLOGICAL PROCESS MODELING AIMING TO IMPROVE ITS OPERATIONS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ivan Mihajlović

    2011-11-01

    Full Text Available This paper presents the modeling procedure of one real technological system. In this study, thecopper extraction from the copper flotation waste generated at the Bor Copper Mine (Serbia, werethe object of modeling. Sufficient data base for statistical modeling was constructed using theorthogonal factorial design of the experiments. Mathematical model of investigated system wasdeveloped using the combination of linear and multiple linear statistical analysis approach. Thepurpose of such a model is obtaining optimal states of the system that enable efficient operationsmanagement. Besides technological and economical, ecological parameters of the process wereconsidered as crucial input variables.

  6. Investigation of dynamic processing on aluminum floc aggregation:Cyclic shearing recovery and effect of sulfate ion

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The floc formation and re-aggregation potential and the effects of sulfate on coagulation by AlCl3, polyaluminum chloride (PAC), and Al13 species using a photometric dispersion analyzer (PDA) are in- vestigated. It is found that the recovery level from shearing is the highest for the Al13 species. This is likely a result of increased collision efficiency due to more effective charge neutralization. The ex- perimental results show that sulfate has a significant effect on coagulation and promoting aggregation of hydrolyzed species for the Al13 species. It results in significant improvement of the coagulation effi- ciency through an electrostatic patch effect. The results further indicate that zeta potential of the parti- cle suspension is not the only indicator for the coagulant efficiency when precipitate formation sig- nificantly improves coagulation.

  7. Effect of processing technologies on the allergenicity of food products.

    Science.gov (United States)

    Jiménez-Saiz, Rodrigo; Benedé, Sara; Molina, Elena; López-Expósito, Iván

    2015-01-01

    Heat treatment has been used since ancient times for food processing, first to ensure the safety of food and its storage, but also to transform its characteristics (in its raw form) and obtain new textures, flavors, or novel foods. However, the transformation experienced by food components when heated, or processed, can dramatically affect the allergenicity of food, either reducing or increasing it. To date, most of the articles published dealing with the changes in the potential allergenicity of food are focused on heat treatment and the Maillard reaction. However, it is also important to give prominence to other group of new technologies developed nowadays, such as high-pressure processing, microwaves and food irradiation. These techniques are not likely to replace traditional processing methods, but they are becoming attractive for the food industry due to different reasons, and it is expected in the near future to have different products on the market processed with these new technologies at an affordable cost. Moreover, other biochemical modifications, particularly enzymatic cross-linking of proteins, have attracted wide-spread attention and will be considered as well in this review, because of its great opportunities to induce protein modification and thus affect food allergenicity. Together with the effect of processing of food allergens, this review will place special attention on gastroduodenal digestion of processed allergens, which directly affects their allergenicity.

  8. Technological and life cycle assessment of organics processing odour control technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bindra, Navin [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Dubey, Brajesh, E-mail: bkdubey@civil.iitkgp.ernet.in [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada); Environmental Engineering Division, Department of Civil Engineering, Indian Institute of Technology, Kharagpur, West Bengal 721302 (India); Dutta, Animesh [School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario N1G2W1 (Canada)

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories. - Highlights: • Assessment of odour control technologies for organics processing facilities. • Comparative life cycle assessment of three odour control technologies was conducted

  9. Innovation processes in technologies for the processing of refractory mineral raw materials

    Science.gov (United States)

    Chanturiya, V. A.

    2008-12-01

    Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

  10. Using CASE to Exploit Process Modeling in Technology Transfer

    Science.gov (United States)

    Renz-Olar, Cheryl

    2003-01-01

    A successful business will be one that has processes in place to run that business. Creating processes, reengineering processes, and continually improving processes can be accomplished through extensive modeling. Casewise(R) Corporate Modeler(TM) CASE is a computer aided software engineering tool that will enable the Technology Transfer Department (TT) at NASA Marshall Space Flight Center (MSFC) to capture these abilities. After successful implementation of CASE, it could then go on to be applied in other departments at MSFC and other centers at NASA. The success of a business process is dependent upon the players working as a team and continuously improving the process. A good process fosters customer satisfaction as well as internal satisfaction in the organizational infrastructure. CASE provides a method for business process success through functions consisting of systems and processes business models; specialized diagrams; matrix management; simulation; report generation and publishing; and, linking, importing, and exporting documents and files. The software has an underlying repository or database to support these functions. The Casewise. manual informs us that dynamics modeling is a technique used in business design and analysis. Feedback is used as a tool for the end users and generates different ways of dealing with the process. Feedback on this project resulted from collection of issues through a systems analyst interface approach of interviews with process coordinators and Technical Points of Contact (TPOCs).

  11. Novel aspects of platelet aggregation

    Directory of Open Access Journals (Sweden)

    Roka-Moya Y. M.

    2014-01-01

    Full Text Available The platelet aggregation is an important process, which is critical for the hemostatic plug formation and thrombosis. Recent studies have shown that the platelet aggregation is more complex and dynamic than it was previously thought. There are several mechanisms that can initiate the platelet aggregation and each of them operates under specific conditions in vivo. At the same time, the influence of certain plasma proteins on this process should be considered. This review intends to summarize the recent data concerning the adhesive molecules and their receptors, which provide the platelet aggregation under different conditions.

  12. Information Technology Process Improvement Decision-Making: An Exploratory Study from the Perspective of Process Owners and Process Managers

    Science.gov (United States)

    Lamp, Sandra A.

    2012-01-01

    There is information available in the literature that discusses information technology (IT) governance and investment decision making from an executive-level perception, yet there is little information available that offers the perspective of process owners and process managers pertaining to their role in IT process improvement and investment…

  13. The crystallization processes in the aluminum particles production technology

    Directory of Open Access Journals (Sweden)

    Arkhipov Vladimir

    2015-01-01

    Full Text Available The physical and mathematical model of the crystallization process of liquid aluminum particles in the spray-jet of the ejection-type atomizer was proposed. The results of mathematical modeling of two-phase flow in the spray-jet and the crystallization process of fluid particles are given. The influence of the particle size, of the flow rate and the stagnation temperature gas in the ranges of industrial technology implemented for the production of powders aluminum of brands ASD, on the crystallization characteristics were investigated. The approximations of the characteristics of the crystallization process depending on the size of the aluminum particles on the basis of two approaches to the mathematical description of the process of crystallization of aluminum particles were obtained. The results allow to optimize the process parameters of ejection-type atomizer to produce aluminum particles with given morphology.

  14. IMPROVING THE QUALITY OF MAINTENANCE PROCESSES USING INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Zora Arsovski

    2008-06-01

    Full Text Available In essence, process of maintaining equipment is a support process, because it indirectly contributes to operational ability of the production process necessary for the supply chain of the new value. Taking into account increased levels of automatization and quality, this proces s becomes more and more significant and for some branches of industry, even crucial. Due to the fact that the quality of the entire process is more and more dependent on the maintenance process, these processes must be carefully designed and effectively im plemented. There are various techniques and approaches at our disposal, such as technical, logistical and intensive application of the information - communication technologies. This last approach is presented in this work. It begins with organizational goa ls, especially quality objectives. Then, maintenance processes and integrated information system structures are defined. Maintenance process quality and improvement processes are defined using a set of performances, with a special emphasis placed on effectiveness and quality economics. At the end of the work, information system for improving maintenance economics is structured. Besides theoretical analysis, work also presents results authors obtained analyzing food industry, metal processing industry an d building materials industry.

  15. Technology for improving the performance of semiconductor process; Handotai process no koeinoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-29

    Introduced herein is a report on technology for improving the performance of semiconductor processes, the report resulting from the researches conducted by the submicron rule manufacturing technology research sub-committee. Chapter 1 treats the improvement of lithography, discussing the characteristics of, materials for, and problems in the chemical amplification type resist. Chapter 2 discusses the improvement of the thin film forming technology, summarizing the elements of surface reaction, and technologies relating to the formation of multi-layer wirings and contacts, in Si-based CVD technology. Chapter 3 describes the devices used in and findings obtained from the experiments conducted aiming at realizing a higher precision etching technology. Chapter 4 reports ULSI material technology, centering about the mechanism of bonding, characteristics of junction boundaries, bondage between different substrates, formation of super-fine silicone layer, improvement of characteristics and simplification of processes, and the comparison between bonded SOI (silicon on insulator) and SIMOX (separation by implanted oxygen). Chapter 5 introduces experimenting devices and the results of experiments regarding the growth of natural oxidation film and the examination of surface reactions, for which the technology of in-situ FTIR-ATR (Fourier transformation infrared-attenuated total reflection) is utilized. Chapter 6 discusses the need for and the merit and demerit of the surface control cluster tool for use in the manufacture of the semiconductor device. 219 refs., 117 figs., 10 tabs.

  16. Designing Robust Process Analytical Technology (PAT) Systems for Crystallization Processes: A Potassium Dichromate Crystallization Case Study

    DEFF Research Database (Denmark)

    Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan

    2013-01-01

    The objective of this study is to test and validate a Process Analytical Technology (PAT) system design on a potassium dichromate crystallization process in the presence of input uncertainties using uncertainty and sensitivity analysis. To this end a systematic framework for managing uncertaintie...

  17. The economic valuation of improved process plant decision support technology.

    Science.gov (United States)

    White, Douglas C

    2007-06-01

    How can investments that would potentially improve a manufacturing plant's decision process be economically justified? What is the value of "better information," "more flexibility," or "improved integration" and the technologies that provide these effects? Technology investments such as improved process modelling, new real time historians and other databases, "smart" instrumentation, better data analysis and visualization software, and/or improved user interfaces often include these benefits as part of their valuation. How are these "soft" benefits to be converted to a quantitative economic return? Quantification is important if rational management decisions are to be made about the correct amount of money to invest in the technologies, and which technologies to choose among the many available ones. Modelling the plant operational decision cycle-detect, analyse, forecast, choose and implement--provides a basis for this economic quantification. In this paper a new economic model is proposed for estimation of the value of decision support investments based on their effect upon the uncertainty in forecasting plant financial performance. This model leads to quantitative benefit estimates that have a realistic financial basis. An example is presented demonstrating the application of the method.

  18. Role of health-keeping technologies in educational process

    Directory of Open Access Journals (Sweden)

    Voloshin O. R.

    2012-07-01

    Full Text Available The value of health-keeping technologies in educational process is considered. Theoretical methodological approaches of their interpretation are exposed. The making forming for the man of conscious motivation in relation to the maintainance of individual health is shown. Valeological and ecological values are analysed. The features of introduction of health-keeping technologies in a modern educational process are certain. The complex estimation of terms of education and studies, which allow to provide the good state of health of young people, care of high level of their self-realization, skills of healthy way of life, is resulted, to carry out monitoring of indexes of individual development, forecast the possible changes of health. It is marked on the necessity of providing of harmonious development of natural capabilities of personality: its mind, moral and aesthetically beautiful senses, requirement in activity, capture initial experience of socializing with people.

  19. An Improved Processing Technology of Traditional Soybean Films

    Institute of Scientific and Technical Information of China (English)

    JiangYuanrong; ZhangHui

    2002-01-01

    This paper studies on the processing technology of soybean films.Based on the statistical analysis of the traditional soybean films,two property indices were determined with Rheometer;Percent Elongation(PE) higher than 5.49%,Tensile Strength(TS)higher than 23.25kg/cm2.As the examined specimen has 19.0±0.5% moisture.An improved processing technology high yield of soybean films was obtained.The new product has the nearly same or even higher nutrient content,property and structure as the traditional ones.The new product is consistent,flexible,smooth and transparent.The method offers more promises for commercial-scale film production.

  20. Lignocellulosic ethanol: Technology design and its impact on process efficiency.

    Science.gov (United States)

    Paulova, Leona; Patakova, Petra; Branska, Barbora; Rychtera, Mojmir; Melzoch, Karel

    2015-11-01

    This review provides current information on the production of ethanol from lignocellulosic biomass, with the main focus on relationships between process design and efficiency, expressed as ethanol concentration, yield and productivity. In spite of unquestionable advantages of lignocellulosic biomass as a feedstock for ethanol production (availability, price, non-competitiveness with food, waste material), many technological bottlenecks hinder its wide industrial application and competitiveness with 1st generation ethanol production. Among the main technological challenges are the recalcitrant structure of the material, and thus the need for extensive pretreatment (usually physico-chemical followed by enzymatic hydrolysis) to yield fermentable sugars, and a relatively low concentration of monosaccharides in the medium that hinder the achievement of ethanol concentrations comparable with those obtained using 1st generation feedstocks (e.g. corn or molasses). The presence of both pentose and hexose sugars in the fermentation broth, the price of cellulolytic enzymes, and the presence of toxic compounds that can inhibit cellulolytic enzymes and microbial producers of ethanol are major issues. In this review, different process configurations of the main technological steps (enzymatic hydrolysis, fermentation of hexose/and or pentose sugars) are discussed and their efficiencies are compared. The main features, benefits and drawbacks of simultaneous saccharification and fermentation (SSF), simultaneous saccharification and fermentation with delayed inoculation (dSSF), consolidated bioprocesses (CBP) combining production of cellulolytic enzymes, hydrolysis of biomass and fermentation into one step, together with an approach combining utilization of both pentose and hexose sugars are discussed and compared with separate hydrolysis and fermentation (SHF) processes. The impact of individual technological steps on final process efficiency is emphasized and the potential for use

  1. Research on Digital Watermark Using Pre-Processing Technology

    Institute of Scientific and Technical Information of China (English)

    Ru Guo-bao; Ru Guo-bao; Niu Hui-fang; Niu Hui-fang; Yang Rui; Yang Rui; Sun Hong; Sun Hong; Shi Hong-ling; Shi Hong-ling; Huang Tian-xi; Huang Tian-xi

    2003-01-01

    We have realized a watermark embedding system based on audio perceptual masking and brought forward a watermark detection system using pre-processing technology.We can detect watermark from watermarked audio without original audio by using this method. The results have indicated that this embedding and detecting method is robust, on the premise of not affecting the hearing quality, it can resist those attacks such as MPEG compressing, filtering and adding white noise.

  2. Surviving security how to integrate people, process, and technology

    CERN Document Server

    Andress, Amanda

    2003-01-01

    WHY DO I NEED SECURITY? Introduction The Importance of an Effective Security Infrastructure People, Process, and Technology What Are You Protecting Against? Types of Attacks Types of Attackers Security as a Competitive Advantage Choosing a Solution Finding Security Employees The Layered Approach UNDERSTANDING REQUIREMENTS AND RISK What Is Risk? Embracing Risk Information Security Risk Assessment Assessing Risk Insurance SECURITY POLICIES AND PROCEDURES Internal Focus Is Key Security Awareness and Education Policy Life Cycle Developing Policies Components of a Security Policy Sample Security Po

  3. Effectiveness of Information Technology Infrastructure Library Process Implementations by Information Technology Departments within United States Organizations

    Science.gov (United States)

    Persinger, Jon F.

    2010-01-01

    This research study examined whether the overall effectiveness of the Information Technology Infrastructure Library (ITIL) could be predicted by measuring multiple independent variables. The primary variables studied included the number of ITIL process modules adopted and the overall ITIL "maturity level." An online survey was used to…

  4. Prospects of Applying Feed Processing Technologies Based on Industrial Plantation

    Directory of Open Access Journals (Sweden)

    Simon Petrus Ginting

    2012-06-01

    Full Text Available The potency of plantation sectors (palm oil, sugar cane and cacao as alternative feed resources for ruminants has been acknowledged since 20 – 25 years ago. However, the level of utilization of these feeds in small ruminant production system has been very low and sporadic. The typical chemical and physical characteristics of most of those feedstuffs required some steps of processing in order to improve their nutritional quality and to ease their handling. Small ruminants, like sheep and goats have relatively higher metabolic energy requirement per kg BW and anatomically have lower gut capacity to process lignocelluose materials compared to large ruminants. It is, therefore, these animals nutritionally face more constraints in handling lignocellulose and bulky materials mostly found in industrial by products or crop-residues from plantations. Physical processes (chopping, phyiscal separation, hydrothermal, chemical processes (ammoniation, hydrolyses and oxidative treatments and bio-conversions (fermentation, ensiling have been recommended as alternative technologies in maximizing the utilization of those feedstuffs for small ruminant animals. The principal mechanisms of those treatments are: (i breaking the linkages between structural carbohydrate and lignin so that it could be easily digested by the animal enzyme systems and (ii preserving the material from being spoilage due to its high moisture content or for feed stocking purposes. Priorities for choosing the most effective processing technology for implementation or adoption is depent largely on the scale of feed production. Ammoniation, chopping, physical separation, ensiling or bio-conversion are several technologies mostly recommended for small scale operation in situ. These alternative technologies should be able to be adopted by small-holders living around the plantation area. The commercial or large scale feed production could be implemented by the plantation industry by giving high

  5. FY 2009 Progress: Process Monitoring Technology Demonstration at PNNL

    Energy Technology Data Exchange (ETDEWEB)

    Arrigo, Leah M.; Christensen, Ronald N.; Fraga, Carlos G.; Liezers, Martin; Peper, Shane M.; Thomas, Elizabeth M.; Bryan, Samuel A.; Douglas, Matthew; Laspe, Amy R.; Lines, Amanda M.; Peterson, James M.; Ward, Rebecca M.; Casella, Amanda J.; Duckworth, Douglas C.; Levitskaia, Tatiana G.; Orton, Christopher R.; Schwantes, Jon M.

    2009-12-01

    Pacific Northwest National Laboratory (PNNL) is developing and demonstrating three technologies designed to assist in the monitoring of reprocessing facilities in near-real time. These technologies include 1) a multi-isotope process monitor (MIP), 2) a spectroscopy-based monitor that uses UV-Vis-NIR (ultraviolet-visible-near infrared) and Raman spectrometers, and 3) an electrochemically modulated separations approach (EMS). The MIP monitor uses gamma spectroscopy and pattern recognition software to identify off-normal conditions in process streams. The UV-Vis-NIR and Raman spectroscopic monitoring continuously measures chemical compositions of the process streams including actinide metal ions (uranium, plutonium, neptunium), selected fission products, and major cold flow sheet chemicals. The EMS approach provides an on-line means for separating and concentrating elements of interest out of complex matrices prior to detection via nondestructive assay by gamma spectroscopy or destructive analysis with mass spectrometry. A general overview of the technologies and ongoing demonstration results are described in this report.

  6. Conceptual framework for the mapping of management process with information technology in a business process.

    Science.gov (United States)

    Rajarathinam, Vetrickarthick; Chellappa, Swarnalatha; Nagarajan, Asha

    2015-01-01

    This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified.

  7. Conceptual Framework for the Mapping of Management Process with Information Technology in a Business Process

    Science.gov (United States)

    Chellappa, Swarnalatha; Nagarajan, Asha

    2015-01-01

    This study on component framework reveals the importance of management process and technology mapping in a business environment. We defined ERP as a software tool, which has to provide business solution but not necessarily an integration of all the departments. Any business process can be classified as management process, operational process and the supportive process. We have gone through entire management process and were enable to bring influencing components to be mapped with a technology for a business solution. Governance, strategic management, and decision making are thoroughly discussed and the need of mapping these components with the ERP is clearly explained. Also we suggest that implementation of this framework might reduce the ERP failures and especially the ERP misfit was completely rectified. PMID:25861688

  8. Optimized Technology for Residuum Processing in the ARGG Unit

    Institute of Scientific and Technical Information of China (English)

    Pan Luoqi; Yuan hongxing; Nie Baiqiu

    2006-01-01

    The influence of feedstock property on operation in the FCC unit was studied to identify the cause leading to deteriorated products distribution related with increasingly heavier feedstock for the ARGG unit. In order to maximize the economic benefits of the ARGG unit a string of measures, including the modification of catalyst formulation, retention of high catalyst activity, application of mixed termination agents to control the reaction temperature and once-through operation, and optimization of catalyst regeneration technique, were adopted to adapt the ARGG unit to processing of the heavy feedstock with its carbon residue equating to 7% on an average. The heavy oil processing technology has brought about apparent economic benefits.

  9. Advanced processing technology for high-nitrogen steels

    Science.gov (United States)

    Dunning, John S.; Simmons, John W.; Rawers, James C.

    1994-03-01

    Both high-and low-pressure processing techniques can be employed to add nitrogen to iron-based alloys at levels in excess of the equilibrium, ambient-pressure solubility limits. High-pressure techniques include high-pressure melting-solidification; powder atomization; and high-pressure, solid-state diffusion. Low-pressure techniques are centrifugal powder atomization and mechanical alloying. This article describes U.S. Bureau of Mines research on a range of processing technologies for nitrogen steels and references thermodynamic and materials characterization studies that have been completed on these materials.

  10. Radiant-and-plasma technology for coal processing

    Directory of Open Access Journals (Sweden)

    Vladimir Messerle

    2012-12-01

    Full Text Available Radiant-and-plasma technology for coal processing is presented in the article. Thermodynamic computation and experiments on plasma processing of bituminous coal preliminary electron-beam activated were fulfilled in comparison with plasma processing of the coal. Positive influence of the preliminary electron-beam activation of coal on synthesis gas yield was found. Experiments were carried out in the plasma gasifier of 100 kW power. As a result of the measurements of material and heat balance of the process gave the following integral indicators: weight-average temperature of 2200-2300 K, and carbon gasification degree of 82,4-83,2%. Synthesis gas yield at thermochemical preparation of raw coal dust for burning was 24,5% and in the case of electron-beam activation of coal synthesis gas yield reached 36,4%, which is 48% higher.

  11. [Impurity removal technology of Tongan injection in liquid preparation process].

    Science.gov (United States)

    Yang, Xu-fang; Wang, Xiu-hai; Bai, Wei-rong; Kang, Xiao-dong; Liu, Jun-chao; Wu, Yun; Xiao, Wei

    2015-08-01

    In order to effectively remove the invalid impurities in Tongan injection, optimize the optimal parameters of the impurity removal technology of liquid mixing process, in this paper, taking Tongan injection as the research object, with the contents of celandine alkali, and sinomenine, solids reduction efficiency, and related substances inspection as the evaluation indexes, the removal of impurities and related substances by the combined process of refrigeration, coction and activated carbon adsorption were investigated, the feasibility of the impurity removal method was definited and the process parameters were optimized. The optimized process parameters were as follows: refrigerated for 36 h, boiled for 15 min, activated carbon dosage of 0.3%, temperature 100 degrees C, adsorption time 10 min. It can effectively remove the tannin, and other impurities, thus ensure the quality and safety of products.

  12. LpMab-12 Established by CasMab Technology Specifically Detects Sialylated O-Glycan on Thr52 of Platelet Aggregation-Stimulating Domain of Human Podoplanin.

    Directory of Open Access Journals (Sweden)

    Yukinari Kato

    Full Text Available Podoplanin (PDPN, also known as Aggrus, possesses three tandem repeat of platelet aggregation-stimulating (PLAG domains in its N-terminus. Among the PLAG domains, sialylated O-glycan on Thr52 of PLAG3 is essential for the binding to C-type lectin-like receptor-2 (CLEC-2 and the platelet-aggregating activity of human PDPN (hPDPN. Although various anti-hPDPN monoclonal antibodies (mAbs have been generated, no specific mAb has been reported to target the epitope containing glycosylated Thr52. We recently established CasMab technology to develop mAbs against glycosylated membrane proteins. Herein, we report the development of a novel anti-glycopeptide mAb (GpMab, LpMab-12. LpMab-12 detected endogenous hPDPN by flow cytometry. Immunohistochemical analyses also showed that hPDPN-expressing lymphatic endothelial and cancer cells were clearly labeled by LpMab-12. The minimal epitope of LpMab-12 was identified as Asp49-Pro53 of hPDPN. Furthermore, LpMab-12 reacted with the synthetic glycopeptide of hPDPN, corresponding to 38-54 amino acids (hpp3854: 38-EGGVAMPGAEDDVVTPG-54, which carries α2-6 sialylated N-acetyl-D-galactosamine (GalNAc on Thr52. LpMab-12 did not recognize non-sialylated GalNAc-attached glycopeptide, indicating that sialylated GalNAc on Thr52 is necessary for the binding of LpMab-12 to hPDPN. Thus, LpMab-12 could serve as a new diagnostic tool for determining whether hPDPN possesses the sialylation on Thr52, a site-specific post-translational modification critical for the hPDPN association with CLEC-2.

  13. Algorithm of automatic generation of technology process and process relations of automotive wiring harnesses

    Institute of Scientific and Technical Information of China (English)

    XU Benzhu; ZHU Jiman; LIU Xiaoping

    2012-01-01

    Identifying each process and their constraint relations from the complex wiring harness drawings quickly and accurately is the basis for formulating process routes. According to the knowledge of automotive wiring harness and the characteristics of wiring harness components, we established the model of wiring harness graph. Then we research the algorithm of identifying technology processes automatically, finally we describe the relationships between processes by introducing the constraint matrix, which is in or- der to lay a good foundation for harness process planning and production scheduling.

  14. Emerging technologies in extraction and processing of metals

    Science.gov (United States)

    Reddy, Ramana G.

    2003-04-01

    The growing need to conserve energy and materials and prevent environmental pollution led to an increased demand for better understanding of potential as well as existing processes. In this context, thermodynamic and transport modeling of materials and processes provides a rapid and cost-effective means of conducting and minimizing the complexity of experimental investigations and developing innovative and environmentally friendly metallurgical processes. This presentation concentrates on some fundamentals on new technologies as extractive metallurgy of copper, lead, aluminum, and other nonferrous metals and processing of nanocomposites. The newer routes of copper smelting and modeling of impurities in copper and lead slags and mattes are reviewed. The copper smelting capacity increased by a factor of 10 during the last three decades, the smelting rate increased by a factor of 6, and the process fuel equivalent decreased by a factor of 2. The a priori prediction, with no adjustable parameters, of impurity capacities of S and As in copper slags and S in lead slags, based on the Reddy-Blander model, is reviewed. Excellent agreement between the model-predicted capacities data and laboratory experimental and industrial data was observed. The model is an invaluable tool for optimization of process parameters in the efficient removal of impurities from the nonferrous-metals smelting and refining processes. A new in-situ processing technology for the production of a lightweight alloy matrix with ceramic particle reinforcements such as SiC in aluminum alloy matrix composites by bubbling reactive gas is reviewed. Thermal plasma processing of a nanoscale aluminum alloy matrix with TiC and TiN composites is discussed. The in-situ formed reinforcements are thermodynamically stable, and the composite particles are of uniform size. The optimum process parameters for the production of composite powders by thermal plasma are discussed. A low-temperature aluminum production and

  15. Novel approaches in food-processing technology: new technologies for preserving foods and modifying function.

    Science.gov (United States)

    Knorr, D

    1999-10-01

    Recent advances in emerging food-processing technologies, such as high hydrostatic pressure or high-intensity electric field pulses, allow targeted and sophisticated modification and preservation of foods. We are beginning to understand the mechanisms involved in pressure inactivation of bacterial spores and have been collecting considerable amounts of kinetic data regarding inactivation mechanisms of enzymes and vegetative microorganisms. We are also gaining more insight into the permeabilization of plant membranes and related biosynthetic responses, making progress in food structure engineering and food modification for function, and have been initiating process developments for gentle processing of delicate biomaterials based on pressure-assisted phase transitions of water.

  16. Layers And Processes In The Model Of Technological Postal System

    Directory of Open Access Journals (Sweden)

    Madleňáková Lucia

    2015-12-01

    Full Text Available The paper include important aspects of layer model of postal technological system such as makes the possibility to define rules for regulating, technical and technological requirements and interfaces to communicate with other postal systems. The current postal reform is mainly attributable to release of network access and ensuring full interoperability between technological systems. Not only to ensure the development and protection of competition but also in respect to the conservation of requirements to provide the universal service, which is the performance of public interest. There is a space here to examine the postal system, not only from a procedural point of view, but to be viewed as an open communication system. It is possible to find there the commonalities with other communication sector branches and to handle the technological postal system in more layers; similarly as the electronic communication systems are handled. Model of layer postal system, based not only on the processes but on layers functionality, will enable to identify communication protocols and interfaces determining interoperability. It also opens the question of appropriate regulation model.

  17. Evaluation of Brine Processing Technologies for Spacecraft Wastewater

    Science.gov (United States)

    Shaw, Hali L.; Flynn, Michael; Wisniewski, Richard; Lee, Jeffery; Jones, Harry; Delzeit, Lance; Shull, Sarah; Sargusingh, Miriam; Beeler, David; Howard, Jeanie; Howard, Kevin; Harris, Linden; Parodi, Jurek; Kawashima, Brian

    2015-01-01

    Brine drying systems may be used in spaceflight. There are several advantages to using brine processing technologies for long-duration human missions including a reduction in resupply requirements and achieving high water recovery ratios. The objective of this project was to evaluate four technologies for the drying of spacecraft water recycling system brine byproducts. The technologies tested were NASA's Forward Osmosis Brine Drying (FOBD), Paragon's Ionomer Water Processor (IWP), NASA's Brine Evaporation Bag (BEB) System, and UMPQUA's Ultrasonic Brine Dewatering System (UBDS). The purpose of this work was to evaluate the hardware using feed streams composed of brines similar to those generated on board the International Space Station (ISS) and future exploration missions. The brine formulations used for testing were the ISS Alternate Pretreatment and Solution 2 (Alt Pretreat). The brines were generated using the Wiped-film Rotating-disk (WFRD) evaporator, which is a vapor compression distillation system that is used to simulate the function of the ISS Urine Processor Assembly (UPA). Each system was evaluated based on the results from testing and Equivalent System Mass (ESM) calculations. A Quality Function Deployment (QFD) matrix was also developed as a method to compare the different technologies based on customer and engineering requirements.

  18. Study on mineral processing technology for abrasive minerals

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Woong; Yang, Jung Il; Hwang, Seon Kook; Choi, Yeon Ho; Cho, Ken Joon; Shin, Hee Young [Korea Inst. of Geology Mining and Materials, Taejon (Korea, Republic of)

    1995-12-01

    Buyeo Materials in Buyeogun, Choongnam province is a company producing feldspar concentrate, but does not yet utilize the garnet as abrasive material and other useful heavy minerals wasted out from the process of feldspar ore. The purpose of this study is to develop technology and process for the recovery of garnet concentrate. As results, the garnet is defined as ferro manganese garnet. The optimum process for recovery of garnet concentrate is to primarily concentrate heavy minerals from tailings of feldspar processing. And secondly the heavy minerals concentrated is dried and separated garnet concentrate from other heavy minerals. At this time, the garnet concentrate is yield by 0.176%wt from 0.31%wt of heavy minerals in head ore. The garnet concentrate contains 33.35% SiO{sub 2}, 12.20% Al{sub 2}O{sub 3}, 28.47% Fe{sub 2}O{sub 3}, 11.96% MnO. As for utilization of abrasive materials, a fundamental data was established on technology of grinding and classification. (author). 13 refs., 47 figs., 24 tabs.

  19. Handling Measures for Special Cases in Artificial Aggregate Processing Operation%人工骨料加工中特殊情况的处理措施

    Institute of Scientific and Technical Information of China (English)

    董婷; 唐瑞

    2014-01-01

    针对中国水电工程人工骨料加工过程中遭遇坚硬高强超磨蚀性岩石、易破碎岩石、同类岩石不同加工特性岩石等料源时,致使设备磨损大、出现骨料破碎性能差、脱泥难、针片状超标、成品砂石粉含量不可控及脱水时间长等问题提出处理措施,料源加工问题得到了圆满解决。%The raw materials such as the sound, strong and super abrasion rock, fragile rock and same type of rock with different process-ing characteristic in the artificial aggregate processing in hydropower projects in China result in large equipment abrasion, weak crushing performance, difficult mud removal, exceedance of aggregates in needle and chip, uncontrollable powder sediment content and time-con-suming dewatering operation.Aiming at those, corresponding measures are raised to solve issues on the material processing.

  20. Fractals of Silica Aggregates

    Institute of Scientific and Technical Information of China (English)

    ZhinhongLi; DongWu; Yuhansun; JunWang; YiLiu; BaozhongDong; Zhinhong

    2001-01-01

    Silica aggregates were prepared by base-catalyzed hydrolysis and condensation of alkoxides in alcohol.Polyethylene glycol(PEG) was used as organic modifier.The sols were characterized using Small Angle X-ray Scattering (SAXS) with synchrotron radiation as X-ray source.The structure evolution during the sol-gel process was determined and described in terms of the fractal geometry.As-produced silica aggregates were found to be mass fractals.The fractl dimensions spanned the regime 2.1-2.6 corresponding to more branched and compact structures.Both RLCA and Eden models dominated the kinetic growth under base-catalyzed condition.

  1. Process Technology Development of Ni Electroplating in Steam Generator Tube

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Joung Soo; Kim, H. P.; Lim, Y. S.; Kim, S. S.; Hwang, S. S.; Yi, Y. S.; Kim, D. J.; Jeong, M. K.

    2009-11-15

    Operating nuclear power steam generator tubing material, Alloy 600, having superior resistance to corrosion has many experiences of damage by various corrosion mechanisms during long term operation period. In this research project, a new Ni electroplating technology to be applied to repair the damaged steam generator tubes has been developed. In this technology development, the optimum conditions for variables affecting the Ni electroplating process, optimum process conditions for maximum adhesion forces at interface between were established. The various mechanical properties (RT and HT tensile, fatigue, creep, burst, etc.) and corrosion properties (general corrosion, pitting, crevice corrosion, stress corrosion cracking, boric acid corrosion, doped steam) of the Ni plated layers made at the established optimum conditions have been evaluated and confirmed to satisfy the specifications. In addition, a new ECT probe developed at KAERI enable to detect defects from magnetic materials was confirmed to be used for Ni electroplated Alloy 600 tubes at the field. For the application of this developed technology to operating plants, a mock-up electroplating system has been designed and manufactured, and set up at Doosan Heavy Industry Co. and also its performance test has been done. At same time, the anode probe has been modified and improved to be used with the established mock-up system without any problem

  2. The Role of Change Agents in Technology Adoption Process

    Science.gov (United States)

    Gyampoh-Vidogah, Regina; Moreton, Robert

    Although the total or partial failure of Information Technology (IT) projects are well documented such failures are not entirely technical in nature (Donohue et al, 2001). Project failures are often caused by lack of attention to social factors. (2002) identified ethical issues whilst (1999) and (2002) point to human factors, which in essence are the norms and culture of the implementation environment. On the. influence of culture on project success, (2003) noted that, the cultural problems are much bigger than the technical ones, adding: "The biggest hurdle is making people realise that information needs to be shared. It is only with this ethos of sharing information that take-up of technologies will be hastened." Consequently, research and debate about IT implementation is likely to continue until the development process is under better control (Nolan 1999). This state of constant evaluation is crucial because aborted IT projects are still common place. According to (1998), 31% of all corporate technology development projects resulted in cancellation. Although in broad terms, there seems to be ample evidence of the influence of non-technical factors on project failure the dynamics of how this happens is not widely discussed. There are some pointers to the dynamics of the process in literature.

  3. Advanced modeling of management processes in information technology

    CERN Document Server

    Kowalczuk, Zdzislaw

    2014-01-01

    This book deals with the issues of modelling management processes of information technology and IT projects while its core is the model of information technology management and its component models (contextual, local) describing initial processing and the maturity capsule as well as a decision-making system represented by a multi-level sequential model of IT technology selection, which acquires a fuzzy rule-based implementation in this work. In terms of applicability, this work may also be useful for diagnosing applicability of IT standards in evaluation of IT organizations. The results of this diagnosis might prove valid for those preparing new standards so that – apart from their own visions – they could, to an even greater extent, take into account the capabilities and needs of the leaders of project and manufacturing teams. The book is intended for IT professionals using the ITIL, COBIT and TOGAF standards in their work. Students of computer science and management who are interested in the issue of IT...

  4. Some Research Aspects of Telecommunication Technologies' Development Process

    Directory of Open Access Journals (Sweden)

    G. S. Gaivoronska

    2014-04-01

    Full Text Available Development of the telecommunication technologies is being represented by complex dependencies. This work is devoted to some aspects of these dependencies’ research. Development laws of the technology’s life cycle are interested nowadays by many professionals in the field of informatization and telecommunications, as well as in economics, marketing and sociology. This wide interest among experts from a sufficiently diverse subject fields makes necessary a development and study of mathematical model of the various technologies’ development process. With the help of such model it is possible to define patterns, common to all fields of activity, to find the parameters that significantly affect the characteristics of the various technologies’ development process in order to predict its course in further. Carried studies have shown that the mathematical apparatus of the population dynamics is not enough to thoroughly analyze the variety of possible forms of the technology’s life cycle and to set particular properties of the investigated process. For this purpose authors formalized the concept of the kinetic curve and introduced the function describing the development of technology life cycle in time. Using different values of this function’s parameters and choosing the different representations of the function, it is possible to construct a large family of curves representing different variants of technologies development, namely: highly oscillatory; sufficiently smooth; with greater or lesser number of extreme points. Such diversity of the function’s behavior makes it convenient for the usage in simulation models that describe the life cycle of various technologies. A mathematical model based on the theory of the ordinary differential equations is proposed in the paper. This model allows constructing the function that describes the process of the development and changing in the telecommunication technologies. After analyses of the

  5. Actinide solution processing at the Rocky Flats Environmental Technology Site

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1039, for radioactive solution removal and processing at Rocky Flats Environmental Technology Site, Golden, Colorado. The proposal for solution removal and processing is in response to independent safety assessments and an agreement with the State of Colorado to remove mixed residues at Rocky Flats and reduce the risk of future accidents. Monthly public meetings were held during the scoping and preparation of the EA. The scope of the EA included evaluations of alternative methods and locations of solution processing. A comment period from February 20, 1995 through March 21, 1995 was provided to the public and the State of Colorado to offer written comment on the EA. Comments were received from the State of Colorado and the U.S. Environmental Protection Agency. A response to the agency comments is included in the Final EA.

  6. Staging Co-design Processes for Self-care Technologies

    DEFF Research Database (Denmark)

    Brodersen, Søsser Grith Kragh; Lindegaard, Hanne

    2016-01-01

    Many new healthcare technologies are currently being implemented in people’s homes in order to facilitate self-care. Socially innovative design is challenging, since it requires an intimate understanding of people’s abilities and daily practices. In this article, we highlight the need to perform...... field studies in people’s homes and discuss how to stage design processes with the people who are actually going to use the self-care technologies—not only end-users, but also many other actors, such as relatives, caregivers, and municipality and company staff. Specifically, we describe how challenges...... associated with inscribing selfcare into healthcare technologies can be overcome by staging co-design proces...

  7. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  8. Commentary: how can technology help us understand the communication process?

    Science.gov (United States)

    Keyton, Joann

    2012-08-01

    In this commentary, the author reflects on the articles chosen for the special section on communications analysis. These articles problematize communication and raise an interesting set of questions for both human factors and communication scholars to ponder. In the end, both sets of scholars seek the same goal: How do we better examine communication to improve it? Problematizing communication requires scholars to challenge their fundamental assumptions about the phenomenon as well as to tease out the distinctions of methodological approaches typically used by both human factors and communication scholars. Human factors scholars tend to favor forms of communication in which technology or task roles control who can communicate and how. Communication scholars tend to favor contexts in which information flows more freely with fewer explicit restrictions. Creating opportunities to collaborate in research on the communication process may create the best understanding of technology that can better serve our understanding of communication.

  9. TORBED process reactor technology for asphalt paving recycle

    Energy Technology Data Exchange (ETDEWEB)

    Wellwood, G. A. [Torftech Limited, Reading (United Kingdom); Laughlin, R. G. [Torftech Canada Inc., Mississauga, ON (Canada)

    2001-07-01

    Fundamental principles underlying the TORBED reactor technologies are reviewed. Advantages, limitations, and the experience gained in applying the reactor to a range of material processing needs, particularly reprocessing asphalt paving waste, are discussed. The TORBED reactor consists of a compact shallow packed bed of particles suspended above an annular ring of stationary blades through which a process gas stream is passed at high velocity. Unlike fluidized beds, the process gas mass flow can be set to suit the process, i. e. a smaller gas mass flow can be used at a higher velocity at exit from the blades to keep the bed in proper motion. Advantages are: (1) smaller reactor size with rapid start-up and program change, (2) faster and more precise processing of particles, resulting in a consistent product or process, (3) low process stream pressure losses which facilitate process gas recirculation, (4) ability to process widely graded and irregularly shaped feed stocks, and (5) simplicity of operation through real time control. The 'expanded' version of the TORBED reactor also permits fuel injection to generate process gas temperatures in excess of 1600 degrees C, and allows high gas flow rates with low pressure drop. When used to reprocess asphalt paving waste, the coal tar, used in some 25 per cent of existing roads in the Netherlands, can be easily removed and destroyed and the cleaned stone and the energy generated form the destruction of the coal tar, can be reused in creating new bitumen- containing asphalt paving. Excellent results are reported to have been obtained in pilot studies. Pilot trial also have been conducted on the combustion of wood waste for power generation, with encouraging results. Other pilot projects addressed alternative cementitious materials. 5 refs.

  10. Technological and life cycle assessment of organics processing odour control technologies.

    Science.gov (United States)

    Bindra, Navin; Dubey, Brajesh; Dutta, Animesh

    2015-09-15

    As more municipalities and communities across developed world look towards implementing organic waste management programmes or upgrading existing ones, composting facilities are emerging as a popular choice. However, odour from these facilities continues to be one of the most important concerns in terms of cost & effective mitigation. This paper provides a technological and life cycle assessment of some of the different odour control technologies and treatment methods that can be implemented in organics processing facilities. The technological assessment compared biofilters, packed tower wet scrubbers, fine mist wet scrubbers, activated carbon adsorption, thermal oxidization, oxidization chemicals and masking agents. The technologies/treatment methods were evaluated and compared based on a variety of operational, usage and cost parameters. Based on the technological assessment it was found that, biofilters and packed bed wet scrubbers are the most applicable odour control technologies for use in organics processing faculties. A life cycle assessment was then done to compare the environmental impacts of the packed-bed wet scrubber system, organic (wood-chip media) bio-filter and inorganic (synthetic media) bio-filter systems. Twelve impact categories were assessed; cumulative energy demand (CED), climate change, human toxicity, photochemical oxidant formation, metal depletion, fossil depletion, terrestrial acidification, freshwater eutrophication, marine eutrophication, terrestrial eco-toxicity, freshwater eco-toxicity and marine eco-toxicity. The results showed that for all impact categories the synthetic media biofilter had the highest environmental impact, followed by the wood chip media bio-filter system. The packed-bed system had the lowest environmental impact for all categories.

  11. [A new strategy for Chinese medicine processing technologies: coupled with individuation processed and cybernetics].

    Science.gov (United States)

    Zhang, Ding-kun; Yang, Ming; Han, Xue; Lin, Jun-zhi; Wang, Jia-bo; Xiao, Xiao-he

    2015-08-01

    The stable and controllable quality of decoction pieces is an important factor to ensure the efficacy of clinical medicine. Considering the dilemma that the existing standardization of processing mode cannot effectively eliminate the variability of quality raw ingredients, and ensure the stability between different batches, we first propose a new strategy for Chinese medicine processing technologies that coupled with individuation processed and cybernetics. In order to explain this thinking, an individual study case about different grades aconite is provided. We hope this strategy could better serve for clinical medicine, and promote the inheritance and innovation of Chinese medicine processing skills and theories.

  12. Trapping technology for gaseous fission products from voloxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jin Myeong; Park, J. J.; Park, G. I.; Jung, I. H.; Lee, H. H.; Kim, G. H.; Yang, M. S

    2005-05-15

    The objective of this report is to review the different technologies for trapping the gaseous wastes containing Cs, Ru, Tc, {sup 14}C, Kr, Xe, I and {sup 3}H from a voloxidation process. Based on literature reviews and KAERI's experimental results on the gaseous fission products trapping, appropriate trapping method for each fission product has been selected considering process reliability, simplicity, decontamination factor, availability, and disposal. Specifically, the most promising trapping method for each fission product has been proposed for the development of the INL off-gas trapping system. A fly ash filter is proposed as a trapping media for a cesium trapping unit. In addition, a calcium filter is proposed as a trapping media for ruthenium, technetium, and {sup 14}C trapping unit. In case of I trapping unit, AgX is proposed. For Kr and Xe, adsorption on solid is proposed. SDBC (Styrene Divinyl Benzene Copolymer) is also proposed as a conversion media to HTO for {sup 3}H. This report will be used as a useful means for analyzing the known trapping technologies and help selecting the appropriate trapping methods for trapping volatile and semi-volatile fission products, long-lived fission products, and major heat sources generated from a voloxidation process. It can also be used to design an off-gas treatment system.

  13. 结合载波聚合的HARQ进程映射机制研究%Research on HARQ process mapping mechanism combined carrier aggregation

    Institute of Scientific and Technical Information of China (English)

    鲜永菊; 武岳; 王宇; 徐昌彪

    2011-01-01

    主要分析解决LTE-Advanced系统在引入载波聚合技术以后,HARQ(Hybrid Automatic Repeat request)进程映射机制的设计问题.简述了载波聚合技术的原理,介绍了载波聚合中的HARQ映射方式,并指出目前映射方式存在的问题;提出了一种减少反馈量的排序可变HARQ进程映射方案.仿真结果表明,新的方案实现了对分集增益与开销的折中,能够改善系统综合性能,具有良好的应用前景.%This paper analysised and solved the question of designing the HARQ mapping mechanism in LTE-Advanced system which brought the technology of carrier aggregation. Firstly, the basic conception of carrier aggregation was introduced. And then,the current HARQ mapping mechanisms and their existing problems were presented. Finally, a sorting dynamic HARQ mapping mechanism was proposed, which could reduce the feedback overhead. By link simulations, it was proved that the new mechanism achieved the compromise of diversity gain and overhead, improved the comprehensive performance of system and had a good application prospect.

  14. Instrument maintenance of ultrasonic influences parameters measurement in technological processes

    Directory of Open Access Journals (Sweden)

    Tomal V. S.

    2008-04-01

    Full Text Available The contact and non-contact vibration meters for intermittent and continuous control of the vibration amplitude in the ultrasonic technological equipment have been developed. And in order to estimate the cavitation intensity in liquids the authors have developed cavitation activity indicators and cavitation sensitivity meters, allowing to measure the magnitude of the signal level in the range of maximum spectral density of cavitation noise. The developed instruments allow to improve the quality of products, reduce the defect rate and power consumption of equipment by maintaining optimum conditions of the process.

  15. Starting the automation process by using group technology

    Directory of Open Access Journals (Sweden)

    Jorge Andrés García Barbosa

    2010-06-01

    Full Text Available This article describes starting-up an automation process based on applying group technology (GT. Mecanizados CNC, a company making matallurgical sector products, bases the layout (organisation and disposition of its machinery on the concept of manufacturing cells; production is programmed once the best location for the equipment has been determined. The order of making products and suitable setting up of tools for the machinery in the cells is established, aimed at minimising set up leading to achieving 15% improvement in productivity.

  16. Applications of Laser Precisely Processing Technology in Solar Cells

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    According to the design method of laser resonator cavity, we optimized the primary parameters of resonator and utilized LD arrays symmetrically pumping manner to implementing output of the high-brightness laser in our laser cutter, then which was applied to precisely cutting the conductive film of CuInSe2 solar cells, the buried contact silicon solar cells' electrode groove, and perforating in wafer which is used to the emitter wrap through silicon solar cells. Laser processing precision was less than 40μm, the results have met solar cell's fabrication technology, and made finally the buried cells' conversion efficiency be improved from 18% to 21% .

  17. MODERNIZATION OF TECHNOLOGICAL LINE FOR CELLULAR EXTRUSION PROCESS

    Directory of Open Access Journals (Sweden)

    Tomasz Garbacz

    2014-06-01

    As part of the modernization of the cellular extrusion technology the extrusion head was designed and made. During the designing and modeling of the head the Auto CAD programe was used. After the prototyping the extrusion head was tested. In the article specification of cellular extrusion process of thermoplastics was presented. In the research, the endothermal chemical blowing agents in amount 1,0% by mass were used. The quantity of used blowing agent has a direct influence on density and structure of the extruded product of modified polymers. However, these properties have further influence on porosity, impact strength, hardness, tensile strength and another.

  18. Exploitation of Information Processing Technologies to Extend Digital Library Applications

    Directory of Open Access Journals (Sweden)

    Jian-Hua Yeh、Jia-Yanh Chang、Yen-Jen Oyan

    1999-04-01

    Full Text Available

    頁次:1-11

    This paper discusses exploitation of information processing technologies to extend digital library applications to a new dimension. The discussion focuses on the following three information processing technologies.

    l. information extraction.

    2. deductive inference.

    3. data mining.

    The most significant applications are discovery and derivation of new information and knowledge. This paper discusses how these information processing technologies can be exploited to complement the capabilities of human beings in the digital library domain. The tasks that the developed information processing utilities perform are simple and tedious intelligent information processing. However, because a digital library contains a large quantity of contents, it is common that human beings can hardly carry out such tasks exhaustively. As a result, a great amount of information and knowledge may remain undiscovered without the assistance of assistance of such utilities. On the other hands, with the developed information processing utilities, human being are the released form performing

  19. Japan sharpens its waste processing technologies; Le Japon affute ses technologies de traitement des dechets

    Energy Technology Data Exchange (ETDEWEB)

    Mantelet, J.

    2000-09-01

    With the inevitable saturation of rubbish tips in Japan, the mastery of waste processing techniques has become a priority for the government. The law about plastics recycling was enforced in April 2000 and the new standard about dioxins emission has led the industrialists of this sector to develop new technologies. This paper gives an overview of the recent advances in this domain: recycling of packaging materials (liquefaction, gasification, liquefaction, use as fuel substitutes), recycling of biological wastes (dehydration, food processing, methane production), control of dioxins emission from incinerators (treatment of smokes and ashes). (J.S.)

  20. DUPIC nuclear fuel manufacturing and process technology development

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Park, J. J.; Lee, J. W. [and others

    2000-05-01

    In this study, DUPIC fuel fabrication technology and the active fuel laboratory were developed for the study of spent nuclear fuel. A new nuclear fuel using highly radioactive nuclear materials can be studied at the active fuel laboratory. Detailed DUPIC fuel fabrication process flow was developed considering the manufacturing flow, quality control process and material accountability. The equipment layout of about twenty DUPIC equipment at IMEF M6 hot cell was established for the minimization of the contamination during DUPIC processes. The characteristics of the SIMFUEL powder and pellets was studied in terms of milling conditions. The characteristics of DUPIC powder and pellet was studied by using 1 kg of spent PWR fuel at PIEF nr.9405 hot cell. The results were used as reference process conditions for following DUPIC fuel fabrication at IMEF M6. Based on the reference fabrication process conditions, the main DUPIC pellet fabrication campaign has been started at IMEF M6 using 2 kg of spent PWR fuel since 2000 January. As of March 2000, about thirty DUPIC pellets were successfully fabricated.

  1. Active Shop Scheduling Of Production Process Based On RFID Technology

    Directory of Open Access Journals (Sweden)

    Cuihua Chao

    2016-01-01

    Full Text Available In industry 4.0 environment, intelligent technology is almost applied to all parts of the manufacturing process, such as process design, job shop scheduling, etc.. This paper presents an efficient approach to job shop scheduling actively by using RFID to collect real-time manufacturing data. Identified the workpiece by RFID which needs to be machined, it can “ask for” the resource actively for the following process. With these active asking-for strategy, a double genetically encoded improved genetic algorithm is proposed for achieving active job shop scheduling solution during the actual manufacturing process. A case was used to evaluate its effectiveness. Meanwhile, , it can effectively and actively carry out job shop scheduling and has much better convergence effect comparing with basic genetic algorithm. And the job shop scheduler in management center can use the proposed algorithm to get the satisfied scheduling result timely by reducing waiting time and making begin time earlier during transmission between manufacturing process, which makes the scheduling result feasible and accurate.

  2. Environmental assessment for the Processing and Environmental Technology Laboratory (PETL)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The U.S. Department of Energy (DOE) has prepared an environmental assessment (EA) on the proposed Processing and Environmental Technology Laboratory (PETC) at Sandia National Laboratories/New Mexico (SNL/NM). This facility is needed to integrate, consolidate, and enhance the materials science and materials process research and development (R&D) currently in progress at SNL/NM. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, an environmental impact statement is not required, and DOE is issuing this Finding of No Significant Impact (FONSI).

  3. Virtual Welded - Joint Design Integrating Advanced Materials and Processing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zhishang; Ludewig, Howard W.; Babu, S. Suresh

    2005-06-30

    Virtual Welede-Joint Design, a systematic modeling approach, has been developed in this project to predict the relationship of welding process, microstructure, properties, residual stress, and the ultimate weld fatique strength. This systematic modeling approach was applied in the welding of high strength steel. A special welding wire was developed in this project to introduce compressive residual stress at weld toe. The results from both modeling and experiments demonstrated that more than 10x fatique life improvement can be acheived in high strength steel welds by the combination of compressive residual stress from the special welding wire and the desired weld bead shape from a unique welding process. The results indicate a technology breakthrough in the design of lightweight and high fatique performance welded structures using high strength steels.

  4. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Mukkerikar, Amol

    2011-01-01

    in design and analysis of unit operations; iv) the information and models developed are used as building blocks in the development of methods and tools for computer-aided synthesis and design of process flowsheets (CAFD). The applicability of this methodology is highlighted in each level of modeling through......The aim of this work is to present the development of a computer aided multilevel modeling network for the systematic design and analysis of processes employing lipid technologies. This is achieved by decomposing the problem into four levels of modeling: i) pure component property modeling...... and a lipid-database of collected experimental data from industry and generated data from validated predictive property models, as well as modeling tools for fast adoption-analysis of property prediction models; ii) modeling of phase behavior of relevant lipid mixtures using the UNIFACCI model, development...

  5. Application of Ion Beam Processing Technology in Production of Catalysts

    Directory of Open Access Journals (Sweden)

    Mykola G. Bannikov, Javed A. Chattha

    2012-08-01

    Full Text Available In this paper, the applicability of Ion Beam Processing Technology for making catalysts has been inves-tigated. Ceramic substrates of different shapes and metal fibre tablets were implanted by platinum ions and tested in nitrogen oxides (NOx and carbon monoxide (CO conversion reactions. Effectiveness of the implanted catalysts was compared to that of the commercially produced platinum catalysts made by impregnation. Platinum-implanted catalyst having fifteen times less platinum content showed the same CO conversion efficiency as the commercially pro-duced catalyst. It was revealed that the effectiveness of the platinum-implanted catalyst has complex dependence on the process parameters and the optimum can be achieved by varying the ions energy and the duration of implantation. Investigation of the pore structure showed that ion implantation did not decrease the specific surface area of the catalyst.Key Words: Catalyst, Ion Implantation, Noble metals.

  6. Sequence-dependent internalization of aggregating peptides.

    Science.gov (United States)

    Couceiro, José R; Gallardo, Rodrigo; De Smet, Frederik; De Baets, Greet; Baatsen, Pieter; Annaert, Wim; Roose, Kenny; Saelens, Xavier; Schymkowitz, Joost; Rousseau, Frederic

    2015-01-02

    Recently, a number of aggregation disease polypeptides have been shown to spread from cell to cell, thereby displaying prionoid behavior. Studying aggregate internalization, however, is often hampered by the complex kinetics of the aggregation process, resulting in the concomitant uptake of aggregates of different sizes by competing mechanisms, which makes it difficult to isolate pathway-specific responses to aggregates. We designed synthetic aggregating peptides bearing different aggregation propensities with the aim of producing modes of uptake that are sufficiently distinct to differentially analyze the cellular response to internalization. We found that small acidic aggregates (≤500 nm in diameter) were taken up by nonspecific endocytosis as part of the fluid phase and traveled through the endosomal compartment to lysosomes. By contrast, bigger basic aggregates (>1 μm) were taken up through a mechanism dependent on cytoskeletal reorganization and membrane remodeling with the morphological hallmarks of phagocytosis. Importantly, the properties of these aggregates determined not only the mechanism of internalization but also the involvement of the proteostatic machinery (the assembly of interconnected networks that control the biogenesis, folding, trafficking, and degradation of proteins) in the process; whereas the internalization of small acidic aggregates is HSF1-independent, the uptake of larger basic aggregates was HSF1-dependent, requiring Hsp70. Our results show that the biophysical properties of aggregates determine both their mechanism of internalization and proteostatic response. It remains to be seen whether these differences in cellular response contribute to the particular role of specific aggregated proteins in disease.

  7. Minimally Processed Functional Foods: Technological and Operational Pathways.

    Science.gov (United States)

    Rodgers, Svetlana

    2016-10-01

    This paper offers a concise review of technical and operational concepts underpinning commercialization of minimally processed functional foods (FFs), foods with fresh-like qualities commanding premium prices. The growing number of permitted nutritional content/health claims, many of which relate to well-being, coupled with emerging extraction and food processing technologies offers new exciting opportunities for small and medium size enterprises (SMEs) specializing in fresh produce to play an active role in the health market. Supporting SMEs, governments could benefit from savings in healthcare costs and value creation in the economy. Consumers could benefit from novel FF formats such as refrigerated RTE (ready-to-eat) meals, a variety of fresh-like meat-, fish-, and egg-based products, fresh-cut fruits and vegetables, cereal-based fermented foods and beverages. To preserve these valuable commodities, mild biological (enzymatic treatment, fermentation and, bio-preservation) and engineering solutions are needed. The latter include nonthermal techniques such as high-pressure treatment, cook-chill, sous-vide, mirco-encapsulation, vacuum impregnation and others. "De-constructive" culinary techniques such as 3D food printing and molecular gastronomy as well as developments in nutrigenomics and digital technologies facilitate novel product formats, personalization and access to niche markets. In the operational sense, moving from nourishment to health improvement demands a shift from defensive market-oriented to offensive market-developing strategies including collaborative networks with research organizations.

  8. Enterprise applications of semantic technologies for business process management

    Institute of Scientific and Technical Information of China (English)

    Ralf MUELLER

    2012-01-01

    1 Introduction Today's business process management (BPM)systems have evolved to provide rich and sophisticated tooling and runtime support for subject domain experts,business analysts,development,and information technology (IT).However,the evolution of BPM systems led to a jungle of different representation formats for the various artifacts in such systems.These include models for value chains,strategies,goals,and objectives on the analysis side,business process models,organizational data and service models,and finally models for the implementation of a BPM system to a runtime infrastructure.In many systems,the complex relationships between the entities of a BPM system are vaguely documented,let alone be formalized in a machine readable way.This is where semantic technologies kick in:to provide the foundation for formalizing the complex relationships of a business in a common model using Web Ontology Language (OWL) ontologies.This avoids information silos and enables a holistic view to a BPM system using SPARQL.

  9. Using information technology to support knowledge conversion processes

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available One of the main roles of Information Technology in Knowledge Management programs is to accelerate the speed of knowledge transfer and creation. The Knowledge Management tools intend to help the processes of collecting and organizing the knowledge of groups of individuals in order to make this knowledge available in a shared base. Due to the largeness of the concept of knowledge, the software market for Knowledge Management seems to be quite confusing. Technology vendors are developing different implementations of the Knowledge Management concepts in their software products. Because of the variety and quantity of Knowledge Management tools available on the market, a typology may be a valuable aid to organizations that are looking for answers to specific needs. The objective of this article is to present guidelines that help to design such a typology. Knowledge Management solutions such as intranet systems, Electronic Document Management (EDM, groupware, workflow, artificial intelligence-based systems, Business Intelligence (BI, knowledge map systems, innovation support, competitive intelligence tools and knowledge portals are discussed in terms of their potential contributions to the processes of creating, registering and sharing knowledge. A number of Knowledge Management tools (Lotus Notes, Microsoft Exchange, Business Objects, Aris Toolset, File Net, Gingo, Vigipro, Sopheon have been checked. The potential of each category of solutions to support the transfer of tacit and/or explicit knowledge and to facilitate the knowledge conversion spiral in the sense of Nonaka and Takeuchi (1995 is discussed.

  10. Radiation processing applications in the Czechoslovak water treatment technologies

    Science.gov (United States)

    Vacek, K.; Pastuszek, F.; Sedláček, M.

    The regeneration of biologically clogged water wells by radiation proved to be a successful and economically beneficial process among other promising applications of ionizing radiation in the water supply technology. The application conditions and experience are mentioned. The potential pathogenic Mycobacteria occuring in the warm washing and bathing water are resistant against usual chlorine and ozone concentrations. The radiation sensitivity of Mycobacteria allowed to suggest a device for their destroying by radiation. Some toxic substances in the underground water can be efficiently degraded by gamma radiation directly in the wells drilled as a hydraulic barrier surrounding the contaminated land area. Substantial decrease of CN - concentration and C.O.D. value was observed in water pumped from such well equipped with cobalt sources and charcoal. The removing of pathogenic contamination remains to be the main goal of radiation processing in the water purification technologies. The decrease of liquid sludge specific filter resistance and sedimentation acceleration by irradiation have a minor technological importance. The hygienization of sludge cake from the mechanical belt filter press by electron beam appears to be the optimum application in the Czechoslovak conditions. The potatoes and barley crop yields from experimental plots treated with sludge were higher in comparison with using the manure. Biological sludge from the municipal and food industry water purification plants contains nutritive components. The proper hygienization is a necessary condition for using them as a livestock feed supplement. Feeding experiments with broilers and pigs confirmed the possibility of partial (e.g. 50%) replacement of soya-, bone- or fish flour in feed mixtures by dried sludge hygienized either by heat or by the irradiation.

  11. Technology or Process First? A Call for Mediation Between ESM and BPM Approaches in Organizations

    DEFF Research Database (Denmark)

    Siurdyban, Artur; Svejvig, Per; Møller, Charles

    2011-01-01

    between them using strategic alignment, Enterprise Systems and Business Process Management theories. We argue that the insights from these cases can lead to a better alignment between process and technology. Implications for practice include the direction towards a closer integration of process...... and technology factors in organizations. Theoretical implications call for a design-oriented view of technology and process alignment....

  12. Self-construction of core-shell and hollow zeolite analcime icositetrahedra: a reversed crystal growth process via oriented aggregation of nanocrystallites and recrystallization from surface to core.

    Science.gov (United States)

    Chen, Xueying; Qiao, Minghua; Xie, Songhai; Fan, Kangnian; Zhou, Wuzong; He, Heyong

    2007-10-31

    Zeolite analcime with a core-shell and hollow icositetrahedron architecture was prepared by a one-pot hydrothermal route in the presence of ethylamine and Raney Ni. Detailed investigations on samples at different preparation stages revealed that the growth of the complex single crystalline geometrical structure did not follow the classic crystal growth route, i.e., a crystal with a highly symmetric morphology (such as polyhedra) is normally developed by attachment of atoms or ions to a nucleus. A reversed crystal growth process through oriented aggregation of nanocrystallites and surface recrystallization was observed. The whole process can be described by the following four successive steps. (1) Primary analcime nanoplatelets undergo oriented aggregation to yield discus-shaped particles. (2) These disci further assemble into polycrystalline microspheres. (3) The relatively large platelets grow into nanorods by consuming the smaller ones, and meanwhile, the surface of the microspheres recrystallizes into a thin single crystalline icositetrahedral shell via Ostwald ripening. (4) Recrystallization continues from the surface to the core at the expense of the nanorods, and the thickness of the monocrystalline shell keeps on increasing until all the nanorods are consumed, leading to hollow single crystalline analcime icositetrahedra. The present work adds new useful information for the understanding of the principles of zeolite growth.

  13. FOOD PROCESSING TECHNOLOGY AS A MEDIATOR OF FUNCTIONALITY. STRUCTURE-PROPERTY-PROCESS RELATIONSHIPS

    Directory of Open Access Journals (Sweden)

    Ester Betoret

    2015-02-01

    Full Text Available During the last years, the food industry has been facing technical and economic changes both in society and in the food processing practices, paying high attention to food products that meet the consumers´ demands. In this direction, the study areas in food process and products have evolved mainly from safety to other topics such as quality, environment or health. The improvement of the food products is now directed towards ensuring nutritional and specific functional benefits. Regarding the processes evolution, they are directed to ensure the quality and safety of environmentally friendly food products produced optimizing the use of resources, minimally affecting or even enhancing their nutritional and beneficial characteristics. The product structure both in its raw form and after processing plays an important role maintaining, enhancing and delivering the bioactive compounds in the appropriate target within the organism. The aim of this review is to make an overview on some synergistic technologies that can constitute a technological process to develop functional foods, enhancing the technological and/or nutritional functionality of the food products in which they are applied. More concretely, the effect of homogenization, vacuum impregnation and drying operations on bioactive compounds have been reviewed, focusing on the structure changes produced and its relationship on the product functionality, as well as on the parameters and the strategies used to quantify and increase the achieved functionality.

  14. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  15. Selection of Aruscular Mycorrhizal Fungi (AMF Indigeneus in Ultisol for Promoting The Production of Glmalin and Aggregate Formation Processes

    Directory of Open Access Journals (Sweden)

    Amrizal Saidi

    2014-01-01

    Full Text Available The muatualism symbiosis of arbuscular mycorrhizal fungi ( AMF with plants  are able to increase the capacity of plants to absorb nutrients and water from the soil. Recently, research was indicated that AMF hyphae containing glomalin as a glycoprotein that serves to glue the between dispersed soil particles. The content of glomalin in soil was positively correlated with soil aggregate stability. The research potential of AMF species indigenous of Ultisol Darmasraya District of West Sumatra and glomalin production in experimental pots of sterile sand medium has been carried out. The purpose of this study was to determine the diversity of AMF species on Ultisol and to seeking indigenous AMF isolates that have the best glomalin production capability. AMF spores were isolated and identified from the rhizosphere soil of corn in Ultisol. AMF species that have been identified experimentally tested culture medium pot of sand and zeolite (w / w 1:1 using corn crops. The results showed that the AMF species indigenous of Ultisol Darmasraya found 9 species, namely Acaulospora scrobiculata, Glomus etunicatum, Glomus luteum, Glomus mosseae, Glomus verruculosum, Glomus versiforme, Scutellospora gregaria, Scutellospora heterogama and Gigaspora sp. AMF species that showed better colonization ability in maize is G. luteum, G. verruculosum and G. versiforme. All three species can produce glomalin was significantly higher than the other species, ie 1.29 mg.g-1; 1.17 mg.g-1; 1.15 mg.g-1 respectively.

  16. Fluorescence of aminofluoresceins as an indicative process allowing one to distinguish between micelles of cationic surfactants and micelle-like aggregates

    Science.gov (United States)

    Mchedlov-Petrossyan, Nikolay O.; Cheipesh, Tatiana A.; Roshal, Alexander D.; Doroshenko, Andrey O.; Vodolazkaya, Natalya A.

    2016-09-01

    Among the vast set of fluorescein derivatives, the double charged R2- anions of aminofluoresceins are known to exhibit only low quantum yields of fluorescence, \\varphi . The \\varphi value becomes as high as that of the fluorescein dianion when the lone electron pair of the amino group is involved in a covalent bond. According to Munkholm et al (1990 J. Am. Chem. Soc. 112 2608-12), a much smaller increase in the emission intensity can be observed in the presence of surfactant micelles. However, all these observations refer to aqueous or alcoholic solvents. In this paper, we show that in the non-hydrogen bond donor (or ‘aprotic’) solvents DMSO and acetone, the quantum yields, φ, of the 4‧- (or 5‧)-aminofluorescein R2- species amount to 61-67% and approach that of fluorescein (φ  =  87%), whereas in water φ is only 0.6-0.8%. In glycerol, a solvent with an extremely high viscosity, the φ value is only 6-10%. We report on the enhancement of the fluorescence of the aminofluorescein dianions as an indicative process, which allows us to distinguish between the micelle-like aggregates of cationic dendrimers of low generation, common spherical surfactant micelles, and surfactant bilayers. Some of these colloidal aggregates partly restore the fluorescence of aminofluoresceins in aqueous media. By contrast, other positively charged micellar-like aggregates do not enhance the quantum yield of aminofluorescein R2- species. Results for several related systems, such as CTAB-coated SiO2 particles and reverse microemulsions, are briefly described, and the possible reasons for the observed phenomena are discussed.

  17. H Scan/AHP advanced technology proposal evaluation process

    Energy Technology Data Exchange (ETDEWEB)

    Mack, S. [Energetics, Inc., Columbia, MD (United States); Valladares, M.R.S. de [National Renewable Energy Lab., Washington, DC (United States)

    1996-10-01

    It is anticipated that a family of high value/impact projects will be funded by the Hydrogen Program to field test hydrogen technologies that are at advanced stages of development. These projects will add substantial value to the Program in several ways, by: demonstrating successful integration of multiple advanced technologies, providing critical insight on issues of larger scale equipment design, construction and operations management, yielding cost and performance data for competitive analysis, refining and deploying enhanced safety measures. These projects will be selected through a competitive proposal evaluation process. Because of the significant scope and funding levels of projects at these development phases, Program management has indicated the need for an augmented proposal evaluation strategy to ensure that supported projects are implemented by capable investigative teams and that their successful completion will optimally advance programmatic objectives. These objectives comprise a complex set of both quantitative and qualitative factors, many of which can only be estimated using expert judgment and opinion. To meet the above need, the National Renewable Energy Laboratory (NREL) and Energetics Inc. have jointly developed a proposal evaluation methodology called H Scan/AHP. The H Scan component of the process was developed by NREL. It is a two-part survey instrument that substantially augments the type and scope of information collected in a traditional proposal package. The AHP (Analytic Hierarchy Process) component was developed by Energetics. The AHP is an established decision support methodology that allows the Program decision makers to evaluate proposals relatively based on a unique set of weighted criteria that they have determined.

  18. A system of metadata to control the process of query, aggregating, cleaning and analysing large datasets of primary care data

    Directory of Open Access Journals (Sweden)

    Jeremy VanVlymen

    2005-12-01

    Conclusions The PCDQ metadata system provides an auditable method of data processing. It is a method that should improve the reliability, validity and efficiency of processing routinely collected clinical data. This paper sets out to demystify our data processing method and makes the PCDQ metadata system available to clinicians and data processors who might wish to adopt it.

  19. Aggregation of Ribosomal Protein S6 at Nucleolus Is Cell Cycle-Controlled and Its Function in Pre-rRNA Processing Is Phosphorylation Dependent.

    Science.gov (United States)

    Zhang, Duo; Chen, Hui-Peng; Duan, Hai-Feng; Gao, Li-Hua; Shao, Yong; Chen, Ke-Yan; Wang, You-Liang; Lan, Feng-Hua; Hu, Xian-Wen

    2016-07-01

    Ribosomal protein S6 (rpS6) has long been regarded as one of the primary r-proteins that functions in the early stage of 40S subunit assembly, but its actual role is still obscure. The correct forming of 18S rRNA is a key step in the nuclear synthesis of 40S subunit. In this study, we demonstrate that rpS6 participates in the processing of 30S pre-rRNA to 18S rRNA only when its C-terminal five serines are phosphorylated, however, the process of entering the nucleus and then targeting the nucleolus does not dependent its phosphorylation. Remarkably, we also find that the aggregation of rpS6 at the nucleolus correlates to the phasing of cell cycle, beginning to concentrate in the nucleolus at later S phase and disaggregate at M phase. J. Cell. Biochem. 117: 1649-1657, 2016. © 2015 Wiley Periodicals, Inc.

  20. Fluctuations in protein aggregation: Design of preclinical screening for early diagnosis of neurodegenerative disease

    CERN Document Server

    Costantini, Giulio; Taloni, Alessandro; Buell, Alexander K; Zapperi, Stefano; La Porta, Caterina A M

    2016-01-01

    Autocatalytic fibril nucleation has recently been proposed to be a determining factor for the spread of neurodegenerative diseases, but the same process could also be exploited to amplify minute quantities of protein aggregates in a diagnostic context. Recent advances in microfluidic technology allow analysis of protein aggregation in micron-scale samples potentially enabling such diagnostic approaches, but the theoretical foundations for the analysis and interpretation of such data are so far lacking. Here we study computationally the onset of protein aggregation in small volumes and show that the process is ruled by intrinsic fluctuations whose volume dependent distribution we also estimate theoretically. Based on these results, we develop a strategy to quantify in silico the statistical errors associated with the detection of aggregate containing samples. Our work opens a new perspective on the forecasting of protein aggregation in asymptomatic subjects.

  1. Fluctuations in Protein Aggregation: Design of Preclinical Screening for Early Diagnosis of Neurodegenerative Disease

    Science.gov (United States)

    Costantini, Giulio; Budrikis, Zoe; Taloni, Alessandro; Buell, Alexander K.; Zapperi, Stefano; La Porta, Caterina A. M.

    2016-09-01

    Autocatalytic fibril nucleation has recently been proposed to be a determining factor for the spread of neurodegenerative diseases, but the same process could also be exploited to amplify minute quantities of protein aggregates in a diagnostic context. Recent advances in microfluidic technology allow the analysis of protein aggregation in micron-scale samples, potentially enabling such diagnostic approaches, but the theoretical foundations for the analysis and interpretation of such data are, so far, lacking. Here, we study computationally the onset of protein aggregation in small volumes and show that the process is ruled by intrinsic fluctuations whose volume-dependent distribution we also estimate theoretically. Based on these results, we develop a strategy to quantify in silico the statistical errors associated with the detection of aggregate-containing samples. Our work explores a different perspective on the forecasting of protein aggregation in asymptomatic subjects.

  2. Optimization of Processing Technology of Compound Dandelion Wine

    Directory of Open Access Journals (Sweden)

    Wu Jixuan

    2016-01-01

    Full Text Available Exploring dandelion food has been the concern in fields of the food processing and pharmaceutical industry for playing exact curative effect on high-fat-diet induced hepatic steatosis and diuretic activity. Few dandelion foods including drinks and microencapsulation were explored and unilateral dandelion wine were less carried out for its bitter flavour. In tis paper, to optimize the processing technologies of fermented compound wine from dandelion root, the orthogonal experiment design method was used to composite dandelion root powder with glutinous rice and schisandra fruit and optimize the fermenting parameters. Four factors with dandelion content, schisandra content, acidity and sugar content were discussed. The acidity factor was firstly confirmed as 7.0 g/L. The other three factors were confirmed by a series experiments as dandelion 0.55%, schisandra 0.5%, sugar 22%. With nine step processing of mixing substrate, stirring with water, cooking rice, amylase saccharification, pectinase hydrolysis, adjusting juice, fermenting with yeast, fitering, aging, sterilization, a light yellow wine with the special taste with flavour of dandelion, schisandra and rice and less bitter, few index were determined as 14.7% alcohol, 6.85 g/L acidity. A dandelion fermented compound wine with suitable flavour and sanitarian function was developed for enriching the dandelion food.

  3. Advanced Manufacturing Technology Implementation Process in SME: Critical Success Factors

    Directory of Open Access Journals (Sweden)

    Jani Rahardjo

    2010-01-01

    Full Text Available The aim of this paper is to present critical factors that constitute a successful implementation of the Advanced Manufacturing Technologies (AMT in Small Medium Enterprise (SME. Many large companies have applied AMT and the applications have shown significant results in this global market era. Conveniently, these phenomenons are also engaged to Small Medium Enterprises (SME that of high demands on performing high quality product, fast delivery, reliable and more flexible. The implementation of AMT follow several processes namely pre installation, installation, improvement and mature. In order to guarantee the succesfull of running these processes, one should consider the Critical Success Factors (CSF. We conducted a survey to 125 SMEs that have implemented AMT, and found that the CSF for each process are moderately different. Good leadership is the main critical success factor for preparing and installation of the AMT. Once the AMT started or installed and arrived at growth stage, the financial availability factor turns into a critical success factor in the AMT implementation. In, mature stage, the support and commitment of top management becomes an important factor for gaining successful implementation. By means of factor analysis, we could point out that strategic factors are the main factors in pre-installation and installation stage. Finally, in the growth stage and mature stage, both tactical and strategic factors are the important factors in the successful of AMT implementation

  4. Key technologies of drilling process with raise boring method

    Institute of Scientific and Technical Information of China (English)

    Zhiqiang Liu; Yiping Meng

    2015-01-01

    This study presents the concept of shaft constructed by raise boring in underground mines, and the idea of inverse construction can be extended to other fields of underground engineering. The conventional raise boring methods, such as the wood support method, the hanging cage method, the creeping cage method, and the deep-hole blasting method, are analyzed and compared. In addition, the raise boring machines are classified into different types and the characteristics of each type are described. The components of a raise boring machine including the drill rig, the drill string and the auxiliary system are also presented. Based on the analysis of the raise boring method, the rock mechanics problems during the raise boring process are put forward, including rock fragmentation, removal of cuttings, shaft wall stability, and borehole deviation control. Finally, the development trends of raise boring technology are described as follows:(i) improve-ment of rock-breaking modes to raise drilling efficiency, (ii) development of an intelligent control tech-nique, and (iii) development of technology and equipment for nonlinear raise boring.

  5. Key technologies of drilling process with raise boring method

    Directory of Open Access Journals (Sweden)

    Zhiqiang Liu

    2015-08-01

    Full Text Available This study presents the concept of shaft constructed by raise boring in underground mines, and the idea of inverse construction can be extended to other fields of underground engineering. The conventional raise boring methods, such as the wood support method, the hanging cage method, the creeping cage method, and the deep-hole blasting method, are analyzed and compared. In addition, the raise boring machines are classified into different types and the characteristics of each type are described. The components of a raise boring machine including the drill rig, the drill string and the auxiliary system are also presented. Based on the analysis of the raise boring method, the rock mechanics problems during the raise boring process are put forward, including rock fragmentation, removal of cuttings, shaft wall stability, and borehole deviation control. Finally, the development trends of raise boring technology are described as follows: (i improvement of rock-breaking modes to raise drilling efficiency, (ii development of an intelligent control technique, and (iii development of technology and equipment for nonlinear raise boring.

  6. Mechanism of extractant loss in solvent extraction process (Ⅰ)——Transfer of saponified D2EHPA from organic phase to aqueous phase and its aggregation behaviour

    Institute of Scientific and Technical Information of China (English)

    王笃金; 吴瑾光; 李彦; 翁诗甫; 吴佩强; 徐光宪

    1995-01-01

    The phenomenon of the loss of saponified D2EHPA(di(2-ethylhexyl)phosphoric acid,HA)from organic phase to aqueous phase and its aggregation behaviour were studied with FT-IR and DLS(dynamic light scattering)techniques based on the fact that saponified extractant can form reversed micelles orw/o microemulsions in n-heptane,a non-polar diluent.The results indicate that "normal rnioelles" or o/wmicroemulsions are formed from acidic extractant and its sodium salt in aqueous phase,and the micelle ormicroemulsion drop has a non-polar core which can solubilize nheptane,so the equilibrated aqueous phasecontaining extractant is a complex fluid rather than a "real solution".Therefore,the aqueous aggregate for-mation leads to the extractant loss in solvent extraction process.Strong electrolytes can prevent or lessen theextractant loss.The results of this paper provide a theoretical possibility for solving the problem ofextractant and solvent loss in liquid-liquid extraction industry.

  7. Studies on Separation Process and Production Technology of Boron Isotope

    Directory of Open Access Journals (Sweden)

    LI Jian-ping

    2014-02-01

    Full Text Available The boron isotopes separation test was performed by chemical exchange reaction in the benzene ether -three boron fluoride system, which resulted to the boron isotopic enrichment of -10 in the liquid phase, the boron isotopic enrichment of -11 in the gas phase. After then, boron isotope separation trial production has been finished. In this process, the exchange column and complex tower normal operating parameters and the complex tower technology have been obtained, the problems of material distillation purification is solved, boron isotopes feasibility with PTFE packing enrichment is verified in an exchange column. Also, effect of operating pressure, flow and other parameters on boron -10 isotopic enrichment experiments and the effect and properties of the PTFE packing have been investigated in the existing system. All the results are very useful for the industrialization of the boron isotopes separation system.

  8. Solar augmentation for process heat with central receiver technology

    Science.gov (United States)

    Kotzé, Johannes P.; du Toit, Philip; Bode, Sebastian J.; Larmuth, James N.; Landman, Willem A.; Gauché, Paul

    2016-05-01

    Coal fired boilers are currently one of the most widespread ways to deliver process heat to industry. John Thompson Boilers (JTB) offer industrial steam supply solutions for industry and utility scale applications in Southern Africa. Transport cost add significant cost to the coal price in locations far from the coal fields in Mpumalanga, Gauteng and Limpopo. The Helio100 project developed a low cost, self-learning, wireless heliostat technology that requires no ground preparation. This is attractive as an augmentation alternative, as it can easily be installed on any open land that a client may have available. This paper explores the techno economic feasibility of solar augmentation for JTB coal fired steam boilers by comparing the fuel savings of a generic 2MW heliostat field at various locations throughout South Africa.

  9. The Information Technology Program Manager’s Dilemma: Rapidly Evolving Technology and Stagnant Processes

    Science.gov (United States)

    2010-08-01

    information technology systems. The current DoDI 5000.02 leaves IT project and program managers wondering how the current process applies to them, as the guidance is fairly rigid and does not allow for the flexibility required to appropriately manage IT programs. Until very recently, in comparison to the development of a traditional weapons system, IT programs seemed to have been viewed as a utility or service instead of a critical component to national security. Perhaps that is because data passing through cables cannot be observed with the naked senses and therefore an

  10. A review on advances of torrefaction technologies for biomass processing

    Energy Technology Data Exchange (ETDEWEB)

    Acharya, Bimal; Sule, Idris; Dutta, Animesh [University of Guelph, School of Engineering, Guelph, ON (Canada)

    2012-12-15

    Torrefaction is a thermochemical pretreatment process at 200-300 C in an inert condition which transforms biomass into a relatively superior handling, milling, co-firing and clean renewable energy into solid biofuel. This increases the energy density, water resistance and grindability of biomass and makes it safe from biological degradation which ultimately makes easy and economical on transportation and storing of the torrefied products. Torrefied biomass is considered as improved version than the current wood pellet products and an environmentally friendly future alternative for coal. Torrefaction carries devolatilisation, depolymerization and carbonization of lignocellulose components and generates a brown to black solid biomass as a productive output with water, organics, lipids, alkalis, SiO{sub 2}, CO{sub 2}, CO and CH{sub 4}. During this process, 70 % of the mass is retained as a solid product, and retains 90 % of the initial energy content. The torrefied product is then shaped into pellets or briquettes that pack much more energy density than regular wood pellets. These properties minimize on the difference in combustion characteristics between biomass and coal that bring a huge possibility of direct firing of biomass in an existing coal-fired plant. Researchers are trying to find a solution to fire/co-fire torrefied biomass instead of coal in an existing coal-fired based boiler with minimum modifications and expenditures. Currently available torrefied technologies are basically designed and tested for woody biomass so further research is required to address on utilization of the agricultural biomass with technically and economically viable. This review covers the torrefaction technologies, its' applications, current status and future recommendations for further study. (orig.)

  11. Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

    Science.gov (United States)

    Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

    2014-06-01

    The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development.

  12. Technological evolution of main critical processes used in COMPERJ; Evolucao tecnologica dos principais processos criticos utilizados no COMPERJ

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Roberta A. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Construtora Norberto Odebrecht, Rio de Janeiro, RJ (Brazil); Seidl, Peter; Guimaraes, Maria Jose O.C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2008-07-01

    Considered key to the country, the Petrochemical Complex in Rio de Janeiro (COMPERJ) will provide significant benefits to the Brazilian industry, such as production, a large-scale petrochemical raw materials, due to bigger and better processing of heavy oil national, especially the field of Marlim. The deployment of this complex aggregate value to the national economy, due to replace the export of heavy oil, lower market value, the export of products of higher added value to be produced in the complex. The integration refining-petrochemistry that occur in COMPERJ facilitate critical processes, such as atmospheric distillation, vacuum distillation, Petrochemical FCC and polymerization processes. This venture will take in the same plant, a Basic Petrochemical Unit (UPB) and a number of Petrochemical Associates units (UPA's), where in the first generation, the UPB will produce ethylene and propylene and in the second generation, the UPA's will convert the basic petrochemical in resins such as polypropylene, polyethylene, styrene, among others. The technology of PETROBRAS in relation to processes cited previously, has made many progress in recent years and the result of this development can be seen by increasing of patent number in the technical area. The analysis of technological evolution of these processes is of extreme importance for the identification of innovation trends of Brazil in relation to other countries to confirm the great potential of the Research Center of PETROBRAS with regard to these processes. Thus, this work aims to make an analysis of the technological developments of the main critical processes that will occur in COMPERJ and their integration refining-petrochemistry, identifying the various innovations regarding these processes. (author)

  13. Recycling of construction debris as aggregate in the Mid-Atlantic Region, USA

    Science.gov (United States)

    Robinson, G.R.; Menzie, W.D.; Hyun, H.

    2004-01-01

    Reclaimed asphalt pavement (RAP) and portland cement concrete (RPCC) are abundant and available substitutes for natural aggregate in many areas. This paper presents an overview of factors that affect recycled aggregate cost, availability, and engineering performance, and the results of a survey of business practices in the Mid-Atlantic region. For RAP, processing costs are less than those for virgin natural aggregate. Use of efficient asphalt pavement stripping technology, on-site reclamation, and linked two-way transport of asphalt debris and processed asphalt paving mix between asphalt mix plants and paving sites has led to extensive recycling of asphalt pavement in the Mid-Atlantic region of the US. Most of the sites that recycle asphalt pavement (RAP) are located in or near urban areas close to important transportation corridors. RPCC is a viable aggregate source in urban settings where unit costs for processed aggregate from RPCC and natural aggregate are comparable. Disposal fees charged at RPCC recycling sites help defray processing costs and the significantly lower tipping fees at recycling sites versus landfill disposal sites encourage recycling of construction debris as aggregate. Construction contractors and construction debris recycling centers, many of which have the ability to crush and process concrete debris at the job site, produce most RPCC. Production of RPCC aggregate from construction debris that is processed on site using portable equipment moved to the construction site eliminates transportation costs for aggregate and provides an economic incentive for RPCC use. Processing costs, quality and performance issues, and lack of large quantities where needed limit RPCC use. Most RPCC suppliers in the Mid-Atlantic area are located in counties with population densities greater than 400 people/km2 (1036 people/mile2) and that have high unit-value costs and limited local availability of natural aggregate. ?? 2004 Published by Elsevier B.V.

  14. Technology Estimating 2: A Process to Determine the Cost and Schedule of Space Technology Research and Development

    Science.gov (United States)

    Cole, Stuart K.; Wallace, Jon; Schaffer, Mark; May, M. Scott; Greenberg, Marc W.

    2014-01-01

    As a leader in space technology research and development, NASA is continuing in the development of the Technology Estimating process, initiated in 2012, for estimating the cost and schedule of low maturity technology research and development, where the Technology Readiness Level is less than TRL 6. NASA' s Technology Roadmap areas consist of 14 technology areas. The focus of this continuing Technology Estimating effort included four Technology Areas (TA): TA3 Space Power and Energy Storage, TA4 Robotics, TA8 Instruments, and TA12 Materials, to confine the research to the most abundant data pool. This research report continues the development of technology estimating efforts completed during 2013-2014, and addresses the refinement of parameters selected and recommended for use in the estimating process, where the parameters developed are applicable to Cost Estimating Relationships (CERs) used in the parametric cost estimating analysis. This research addresses the architecture for administration of the Technology Cost and Scheduling Estimating tool, the parameters suggested for computer software adjunct to any technology area, and the identification of gaps in the Technology Estimating process.

  15. Diamond MEMS: wafer scale processing, devices, and technology insertion

    Science.gov (United States)

    Carlisle, J. A.

    2009-05-01

    Diamond has long held the promise of revolutionary new devices: impervious chemical barriers, smooth and reliable microscopic machines, and tough mechanical tools. Yet it's been an outsider. Laboratories have been effectively growing diamond crystals for at least 25 years, but the jump to market viability has always been blocked by the expense of diamond production and inability to integrate with other materials. Advances in chemical vapor deposition (CVD) processes have given rise to a hierarchy of carbon films ranging from diamond-like carbon (DLC) to vapor-deposited diamond coatings, however. All have pros and cons based on structure and cost, but they all share some of diamond's heralded attributes. The best performer, in theory, is the purest form of diamond film possible, one absent of graphitic phases. Such a material would capture the extreme hardness, high Young's modulus and chemical inertness of natural diamond. Advanced Diamond Technologies Inc., Romeoville, Ill., is the first company to develop a distinct chemical process to create a marketable phase-pure diamond film. The material, called UNCD® (for ultrananocrystalline diamond), features grain sizes from 3 to 300 nm in size, and layers just 1 to 2 microns thick. With significant advantages over other thin films, UNCD is designed to be inexpensive enough for use in atomic force microscopy (AFM) probes, microelectromechanical machines (MEMS), cell phone circuitry, radio frequency devices, and even biosensors.

  16. Technological foundations of processing tomato pomace in feed additives

    Directory of Open Access Journals (Sweden)

    B. Yegorov

    2015-05-01

    Full Text Available Introduction. Search for new types of alternative raw material for the efficient development of poultry industry and problem of waste disposal of canning industry made it necessary to develop a method of processing tomato pomace in feed additives. Materials and methods. Sampling, preparation and testing were carried out by general and specific organ oleptic and physical-technological methods of assessment and analysis of the properties of raw materials and finished products. Results. Incorporation of tomato pomace in the feed additive reduces the cost of raw materials and expenses associated with moistening of the mixture before extrusion and incorporation of chalk feed will solve the problem of calcium imbalance of laying hens. It was found that extrusion process has improved the physical properties of feed additive and showed the possibility of its use as a feed component: moisture content decreased by 34.5 %, the angle of repose increased by 11.4 %, flowability decreased by 39.7 % and bulk density decreased by 32.3 %. Conclusions. The resulting feed additive will solve the problem of diversification of raw materials, waste, calcium imbalance of laying hens and reduce expenses on compound animal feedstuff production.

  17. Technological process for production of persimmon and strawberry vinegars

    Directory of Open Access Journals (Sweden)

    Claudio Hidalgo

    2010-08-01

    Full Text Available Claudio Hidalgo1, Estibaliz Mateo1, Ana Belen Cerezo2, Maria-Jesús Torija1, Albert Mas11Biotecnologia Enològica, Departament de Bioquimica i Biotecnologia, Facultat d’Enologia, Universitat Rovira i Virgili, Marcel-li Domingo, Tarragona; 2Área de Nutrición y Bromatología, Facultad de Farmacia, Universidad de Sevilla, Sevilla, SpainAbstract: Fruit surplus is common in intensive agriculture in many countries. This ecologic and economic problem requires alternative uses to be found for fruit. The aim of this study was to use surplus fruit to produce vinegar by traditional methods (alcoholic fermentation and acetification from persimmon and strawberry. The process was performed with naturally occurring microorganisms and compared with inoculated commercial wine yeast for alcoholic fermentation. Alcoholic fermentation proceeded faster when inoculated due to the length of the lag phases observed in spontaneous fermentations. The alcoholic fermentations of strawberry mash were faster than those of persimmon mash. In contrast, acetifications were much faster in persimmon (30 days than in strawberry (70 days, in the latter some acetifications were not finished. From the technologic point of view, to produce persimmon and strawberry wine and vinegar, it is better to avoid fruit pressing and perform the process with fruit mash. Inoculation is recommended for persimmon and is necessary for strawberry.Keywords: wine, vinegar, fruit seasonings, acetic acid bacteria

  18. Sustainable technological process as an element of the sustainable development strategy realisation

    Directory of Open Access Journals (Sweden)

    R. Nowosielski

    2011-10-01

    Full Text Available Purpose: The aim of this work is a presentation of the possibility of the sustainable development conception realisation through the sustainable technological processes designing and implementation.Design/methodology/approach: The article includes analysis and estimation of the nickel and chromium coated on the metal elements. In order to modernization of the real process in direction to the sustainable process, the technical solutions which minimise influence on the environment of galvanic treatment process were presented.Findings: The sustainable technological process reduces the achievement of the sustainable development to small area analysis which is the technological process, what makes possible the quantitative estimation (in the internal area of technology.Research limitations/implications: The definition, the model of the sustainable technology and the sustainable development conception are relative and they have not clear character. It means there is no possibility of absolutely the best technology or technological process determination. Because of that we can only design the better process in the comparison with another with regard to adequate criteria.Practical implications: The solution presented in the paper can apply in the industry to estimation and selection of a group of technological processes which characterise different environmental influences.Originality/value: The paper presents search for the sustainable technological processes according to proposed procedure of the sustainable technology design and implementation. Application of the sustainable technological processes in the local scale can leads to the sustainable development conception realisation in the global scale.

  19. Mulifunctional Dendritic Emitter: Aggregation-Induced Emission Enhanced, Thermally Activated Delayed Fluorescent Material for Solution-Processed Multilayered Organic Light-Emitting Diodes

    Science.gov (United States)

    Matsuoka, Kenichi; Albrecht, Ken; Yamamoto, Kimihisa; Fujita, Katsuhiko

    2017-01-01

    Thermally activated delayed fluorescence (TADF) materials emerged as promising light sources in third generation organic light-emitting diodes (OLED). Much effort has been invested for the development of small molecular TADF materials and vacuum process-based efficient TADF-OLEDs. In contrast, a limited number of solution processable high-molecular weight TADF materials toward low cost, large area, and scalable manufacturing of solution processed TADF-OLEDs have been reported so far. In this context, we report benzophenone-core carbazole dendrimers (GnB, n = generation) showing TADF and aggregation-induced emission enhancement (AIEE) properties along with alcohol resistance enabling further solution-based lamination of organic materials. The dendritic structure was found to play an important role for both TADF and AIEE activities in the neat films. By using these multifunctional dendritic emitters as non-doped emissive layers, OLED devices with fully solution processed organic multilayers were successfully fabricated and achieved maximum external quantum efficiency of 5.7%.

  20. Technical Innovation of Yanziya Aggregate Processing System and Its Operation and Management%燕子崖砂石加工系统技术创新及运行管理

    Institute of Scientific and Technical Information of China (English)

    何跃; 王新国; 常玉坤

    2013-01-01

    龙开口水电站大规模采用白云岩作为高强度碾压混凝土砂石骨料生产的母岩,属国内首创,因此缺少相关实验数据和实际生产经验,另外,燕子崖砂石系统自身存在高落差等特点,给砂石系统加工工艺带来了困难.通过采用3个竖井、3个平洞连续阶梯式运输直接将600 m超高落差半成品料输送至半成品堆料场,采用长距离空间曲带式输送机输送成品骨料至坝区转料堆的方案,以及调整爆破参数、干法生产改为湿法生产等工艺措施,解决了骨料高落差、长距离运输,半成品含泥量大,骨料级配不平衡等问题,圆满完成了各阶段浇筑所需砂石骨料的供应任务.%The dolomite is mainly used as the aggregate of high-strength RCC in Longkaikou Hydropower Station, which is first in China. Because there is no experience for learning and there is more than 600 m altitude difference in Yanziya Aggregate Processing System, the aggregate process and transportation is more difficult. In the System, three shafts and three tunnels are excavated to continuously transport semi -finished aggregates from the reclaiming plant to dumping site of semi -finished aggregates with a 600 m vertical drop, and the long-distance belt conveyor with a curved layout in space is used to transport finished aggregate to transfer dumping in dam area. In aggregate processing, the blasting parameters of raw material are adjusted and the dry production is changed to wet production process. The application of these measures solves the problems of aggregate transportation, higher clay content in semi-finished aggregate and unbalanced aggregate gradation.

  1. Decision Gate Process for Assessment of a NASA Technology Development Portfolio

    Science.gov (United States)

    Kohli, Rajiv; Fishman, Julianna L.; Hyatt, Mark J.

    2012-01-01

    The NASA Dust Management Project (DMP) was established to provide technologies (to Technology Readiness Level (TRL) 6) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, to reduce life cycle cost and risk, and to increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product was either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

  2. Novel technology for reducing wavefront image processing latency

    Science.gov (United States)

    Barr, David; Schwartz, Noah; Vick, Andy; Coughlan, John; Halsall, Rob; Basden, Alastair; Dipper, Nigel

    2016-07-01

    Adaptive optics is essential for the successful operation of the future Extremely Large Telescopes (ELTs). At the heart of these AO system lies the real-time control which has become computationally challenging. A majority of the previous efforts has been aimed at reducing the wavefront reconstruction latency by using many-core hardware accelerators such as Xeon Phis and GPUs. These modern hardware solutions offer a large numbers of cores combined with high memory bandwidths but have restrictive input/output (I/O). The lack of efficient I/O capability makes the data handling very inefficient and adds both to the overall latency and jitter. For example a single wavefront sensor for an ELT scale adaptive optics system can produce hundreds of millions of pixels per second that need to be processed. Passing all this data through a CPU and into GPUs or Xeon Phis, even by reducing memory copies by using systems such as GPUDirect, is highly inefficient. The Mellanox TILE series is a novel technology offering a high number of cores and multiple 10 Gbps Ethernet ports. We present results of the TILE-Gx36 as a front-end wavefront sensor processing unit. In doing so we are able to greatly reduce the amount of data needed to be transferred to the wavefront reconstruction hardware. We show that the performance of the Mellanox TILE-GX36 is in-line with typical requirements, in terms of mean calculation time and acceptable jitter, for E-ELT first-light instruments and that the Mellanox TILE series is a serious contender for all E-ELT instruments.

  3. Hemimorphite Ores: A Review of Processing Technologies for Zinc Extraction

    Science.gov (United States)

    Chen, Ailiang; Li, Mengchun; Qian, Zhen; Ma, Yutian; Che, Jianyong; Ma, Yalin

    2016-10-01

    With the gradual depletion of zinc sulfide ores, exploration of zinc oxide ores is becoming more and more important. Hemimorphite is a major zinc oxide ore, attracting much attention in the field of zinc metallurgy although it is not the major zinc mineral. This paper presents a critical review of the treatment for extraction of zinc with emphasis on flotation, pyrometallurgical and hydrometallurgical methods based on the properties of hemimorphite. The three-dimensional framework structure of hemimorphite with complex linkage of its structural units lead to difficult desilicification before extracting zinc in the many metallurgical technologies. It is found that the flotation method is generally effective in enriching zinc minerals from hemimorphite ores into a high-grade concentrate for recovery of zinc. Pure zinc can be produced from hemimorphite or/and willemite with a reducing reagent, like methane or carbon. Leaching reagents, such as acid and alkali, can break the complex structure of hemimorphite to release zinc in the leached solution without generation of silica gel in the hydrometallurgical process. For optimal zinc extraction, combing flotation with pyrometallurgical or hydrometallurgical methods may be required.

  4. Does the Spatial Distribution of the Parasitic Mite Varroa jacobsoni Oud. (Mesostigmata: Varroidae) in Worker Brood of Honey Bee Apis Mellifera L. (Hymenoptera: Apidae) Rely on an Aggregative Process?

    Science.gov (United States)

    Salvy, M.; Capowiez, Y.; Le Conte, Y.; Salvy, M.; Clément, J.-L.

    Varroa jacobsoni is an ectoparasite of honey bees which reproduces in capped brood cells. Multi-infestation is frequently observed in worker brood and can be interpreted as an aggregative phenomenon. The aim of this study was to determine whether the distribution of V. jacobsoni in worker brood cells relies on a random or an aggregative process. We studied the distribution of Varroa females in capped worker brood at similar age by comparing, by a Monte Carlo test, the observed frequency distribution of mites per cell to simulated distributions based on a random process. A complementary approach, using the "nearest neighbor distances" (NND) with Monte Carlo tests, was investigated to study the spatial distribution (a) between mites in different cells and (b) between infested cells in brood. The observed distributions did not differ significantly from that expected by a random process, and we conclude that there is no aggregation during invasion of V. jacobsoni in worker brood.

  5. Achieving CDU requirement for 90-nm technology node and beyond with advanced mask making process technology

    Science.gov (United States)

    Tzu, San-De; Chang, Chung-Hsing; Chen, Wen-Chi; Kliem, Karl-Heinz; Hudek, Peter; Beyer, Dirk

    2005-01-01

    For 90nm node and beyond technology generations, one of the most critical challenges is how to meet the local CD uniformity (proximity) and global CD uniformity (GCDU) requirements within the exposure field. Both of them must be well controlled in the mask making process: (1) proximity effect and, (2) exposure pattern loading effect, or the so-called e-beam "fogging effect". In this paper, we report a method to improve our global CDU by means of a long range fogging compensation together with the Leica SB350 MW. This exposure tool is operated at 50keV and 1nm design grid. The proximity correction is done by the software - package "PROXECCO" from PDF Solutions. We have developed a unique correction method to reduce the fogging effect in dependency of the pattern density of the mask. This allows us to meet our customers" CDU specifications for the 90nm node and beyond.

  6. New technology in everyday life - social processes and environmental impact

    DEFF Research Database (Denmark)

    Røpke, Inge

    2001-01-01

    aspect both of changes in everyday life and of the environmental impact of everyday-life activities. Technological change is often seen as an important part of the solutions to environmental problems, however, when technological change is seen from the perspective of everyday life, this image becomes...... more complex. In this paper technological changes are explored from the perspective of consumption and everyday life, and it is argued that environmental impacts arise through the interplay of technology, consumption and everyday life. Firstly, because technological renewals form integral parts......In the environmental debate it is increasingly acknowledged that our way of life has profound environmental consequences. Therefore, it becomes ever more important to focus on and to understand how everyday life is formed and how it changes over time. Changing technology constitutes an important...

  7. The potential of RFID technology in Blood Center processes.

    Science.gov (United States)

    Kebo, V; Klement, P; Cermáková, Z; Gottfried, J; Sommerová, M; Palecek, A

    2010-01-01

    Current RFID technology deployment is limited by safety, procedural and physical limitations in healthcare field. It is important to define and ensure safe operation of technologies without actual deployment in real operation. Potential problems could arise due to the consequences of technical and physical characteristics of RFID technology and its improper location. This article deals with manipulation of blood products and the definition of suitable places for radio identification. Each suitable place must undergo laboratory experiments and tests. The results can provide a convenient base for defining efficient and safe deployment of RFID technology in Blood Centers with substantial financial savings for Czech healthcare.

  8. Evaluation of Morphological Change and Aggregation Process of Ice Crystals in Frozen Food by Using Fractal Analysis

    Science.gov (United States)

    Koshiro, Yoko; Watanabe, Manabu; Takai, Rikuo; Hagiwara, Tomoaki; Suzuki, Toru

    Size and shape of ice crystals in frozen food materials are very important because they affect not only quality of foods but also the viability of industrial processing such as freeze-drying of concentration. In this study, 30%wt sucrose solution is used as test samples. For examining the effect of stabilizerspectine and xantan gum is added to the sucrose solution. They are frozen on the cold stage of microscope to be observed their growing ice crystals under the circumstance of -10°C. Their size and shape are measured and quantitatively evaluated by applying fractal analysis. lce crystal of complicated shape has large fractal dimension, and vice versa. It successflly categorized the ice crystals into two groups; one is a group of large size and complicated shape, and the other is a group of small size and plain shape. The critical crystal size between the two groups is found to become larger with increasing holding time. It suggests a phenomenological model for metamorphoses process of ice crystals. Further, it is indicated that xantan gum is able to suppress the smoothing of ice crystals.

  9. Oil shale, tar sand, coal research advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, October--December 1992

    Energy Technology Data Exchange (ETDEWEB)

    Speight, J.G.

    1992-12-31

    Accomplishments for the past quarter are presented for the following five tasks: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale research covers oil shale process studies. Tar sand research is on process development of Recycle Oil Pyrolysis and Extraction (ROPE) Process. Coal research covers: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes: advanced process concepts;advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; PGI demonstration project; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; flow-loop testing of double-wall pipe for thermal applications; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; NMR analysis of samples from the ocean drilling program; in situ treatment of manufactured gas plant contaminated soils demonstration program; and solid state NMR analysis of naturally and artificially matured kerogens.

  10. Emerging methods, technologies and process management in software engineering

    CERN Document Server

    Ferrucci, Filomena; Tortora, Genny; Tucci, Maurizio

    2007-01-01

    A high-level introduction to new technologies andmethods in the field of software engineering Recent years have witnessed rapid evolution of software engineering methodologies, and until now, there has been no single-source introduction to emerging technologies in the field.

  11. Clinical engineering and risk management in healthcare technological process using architecture framework.

    Science.gov (United States)

    Signori, Marcos R; Garcia, Renato

    2010-01-01

    This paper presents a model that aids the Clinical Engineering to deal with Risk Management in the Healthcare Technological Process. The healthcare technological setting is complex and supported by three basics entities: infrastructure (IS), healthcare technology (HT), and human resource (HR). Was used an Enterprise Architecture - MODAF (Ministry of Defence Architecture Framework) - to model this process for risk management. Thus, was created a new model to contribute to the risk management in the HT process, through the Clinical Engineering viewpoint. This architecture model can support and improve the decision making process of the Clinical Engineering to the Risk Management in the Healthcare Technological process.

  12. Modular microcomponents for a flexible chemical process technology

    Science.gov (United States)

    Schwesinger, Norbert

    2000-08-01

    Different types of modular micro components such as pumps, values, reactors, separators, residence structures, extractors have been developed. Silicon was used as basic material. Most external dimensions of all different modules are equal. The components contain deep micro structures like channels or groves produced in dry or in wet chemical etching procedures. Different types of bonding technologies were applied to cover the flow structures. Openings positioned at the surface allow the connection with external standard tubes. These openings are arranged on each module at the same position. Due to this basic design a highly flexible combination of the micro modules is possible. Specific process conditions of chemical reactions can be adapted very easily and cost effective by means of module combinations. Holders for the modules contain the fluidic/electric connectors and allow their flexible combination. They are made of PEEK or PTFE. Fixing and sealing of external tubes to the modules can be realised by simple screwing procedures of standard tubes into the holders. Due to this simple screwing procedure all modules can be exchanged on demand. Operating pressures up to the limitation values of the external tubes can be applied to the modules. Electrical contacts arranged inside the holders allow the electrical connection of the modules to an external power supply, as well as a read out of electrical signals delivered from possibly integrated specific sensors. Stand alone examinations of single modules as well as specific chemical reactions in modular combinations were carried out to verify the performance of the micro devices. Successful and hopeful results were found in all cases.

  13. Plan for advanced microelectronics processing technology application. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Goland, A.N.

    1990-10-01

    The ultimate objective of the tasks described in the research agreement was to identify resources primarily, but not exclusively, within New York State that are available for the development of a Center for Advanced Microelectronics Processing (CAMP). Identification of those resources would enable Brookhaven National Laboratory to prepare a program plan for the CAMP. In order to achieve the stated goal, the principal investigators undertook to meet the key personnel in relevant NYS industrial and academic organizations to discuss the potential for economic development that could accompany such a Center and to gauge the extent of participation that could be expected from each interested party. Integrated of these discussions was to be achieved through a workshop convened in the summer of 1990. The culmination of this workshop was to be a report (the final report) outlining a plan for implementing a Center in the state. As events unfolded, it became possible to identify the elements of a major center for x-ray lithography on Lone Island at Brookhaven National Laboratory. The principal investigators were than advised to substitute a working document based upon that concept in place of a report based upon the more general CAMP workshop originally envisioned. Following that suggestion from the New York State Science and Technology Foundation, the principals established a working group consisting of representatives of the Grumman Corporation, Columbia University, the State University of New York at Stony Brook, and Brookhaven National Laboratory. Regular meetings and additional communications between these collaborators have produced a preproposal that constitutes the main body of the final report required by the contract. Other components of this final report include the interim report and a brief description of the activities which followed the establishment of the X-ray Lithography Center working group.

  14. Sensemaking processes of organizational identity and technological capabilities: an empirical study in new technology-based firms

    Directory of Open Access Journals (Sweden)

    Julio César Acosta-Prado

    2013-09-01

    Full Text Available This article analyzes the sensemaking processes of organizational identity and technological capabilities that are facilitators of innovation at New-Technology-Based Firms (NTBFs. The research proposal points out that in this kind of organization, the knowledge transferred by these processes simultaneously addresses two core aspects: their organizational identity and technological capabilities. From a theoretical point of view, our study links two conceptual frameworks (organizational identity and technological capabilities, rarely mentioned together in the preceding research. From a practical point of view, the findings identify these processes and suggest that in this kind of organization both take place simultaneously, which could help stakeholders improve their management. Hence, members and managers of these organizations should take these processes into account as a framework to achieve competitiveness and therefore success.

  15. MANAGEMENT OF TECHNOLOGICAL INNOVATION PROCESSES IN AN ORGANIZATION ON THE BASIS OF COST APPROACH

    OpenAIRE

    Dokukina, I.

    2014-01-01

    The process of innovation management within the intensive economic development includes a number in a sequence of scientific, technological, industrial, institutional and commercial work, leading to an increase in its profits by increasing the productivity of labor and equipment, reducing production costs and improving product quality. In turn, technological innovation is an innovation in technology, improvements in technology, the use of fundamentally new technologies in the production of ma...

  16. Ensuring Machine and Tractor Aggregates Operability

    Science.gov (United States)

    Redreev, G. V.

    2016-08-01

    the operability of the machine and tractor aggregates is ensured by processes which occur in machine units and considered as technical systems. In order to develop theoretical understanding of the processes in technical systems as the basis and purpose of the repairserving actions, the author's concept is presented which relies on on the basic concepts of "processes in technical systems", "maintenance and repair of performers", "maintenance and repair of technology" "objectives of the maintenance and repair". Analysis of the basic concepts of "processes in technical systems" made possible to distinguishing four types of relations: of order, stipulation, exactingness, and non-contradiction. It is shown that the implementation of maintenance and repair of technology should be conducted according to the assessment of the effectiveness of processes in technical systems, revealed in complex diagnosis. The perfection of the design of the machine in terms of its technical operation can be estimated according to the degree of consistency of processes in technical systems, purposes of maintenance and repair. In order to increase the efficiency of the lubrication system,the modernised design of the centrifugal oil filter with permanent control of its cleaning power is offered, which allows changing the technology of the maintenance of engine lubrication system by separating the operations of crankcase oil replacement and the rotor filter cleaning.

  17. Protein aggregation and lyophilization: Protein structural descriptors as predictors of aggregation propensity

    OpenAIRE

    Roughton, Brock C.; Iyer, Lavanya K.; Bertelsen, Esben; Topp, Elizabeth M.; Camarda, Kyle V.

    2013-01-01

    Lyophilization can induce aggregation in therapeutic proteins, but the relative importance of protein structure, formulation and processing conditions are poorly understood. To evaluate the contribution of protein structure to lyophilization-induced aggregation, fifteen proteins were co-lyophilized with each of five excipients. Extent of aggregation following lyophilization, measured using size-exclusion chromatography, was correlated with computational and biophysical protein structural desc...

  18. Tracing where IoT data are collected and aggregated

    OpenAIRE

    Bodei, Chiara; Degano, Pierpaolo; Ferrari, Gian-Luigi; Galletta, Letterio

    2016-01-01

    The Internet of Things (IoT) offers the infrastructure of the information society. It hosts smart objects that automatically collect and exchange data of various kinds, directly gathered from sensors or generated by aggregations. Suitable coordination primitives and analysis mechanisms are in order to design and reason about IoT systems, and to intercept the implied technological shifts. We address these issues from a foundational point of view. To study them, we define IoT-LySa, a process ca...

  19. Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, January--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    Accomplishments for the past quarter are briefly described for the following areas of research: oil shale; tar sand; coal; advanced exploratory process technology; and jointly sponsored research. Oil shale and tar sand researches cover processing studies. Coal research includes: coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology covers: advanced process concepts; advanced mitigation concepts; and oil and gas technology. Jointly sponsored research includes: organic and inorganic hazardous waste stabilization; CROW{sup TM} field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sub 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid-state NMR analysis of Mesaverde Group, Greater Green River Basin tight gas sands; characterization of petroleum residue; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process; oil field waste cleanup using tank bottom recovery process; remote chemical sensor development; in situ treatment of manufactured gas plant contaminated soils demonstration program; solid-state NMR analysis of naturally and artificially matured kerogens; and development of an effective method for the clean-up of natural gas.

  20. Progress and Outlook on Technologies for Processing Inferior Crude Oil in China

    Institute of Scientific and Technical Information of China (English)

    Yuan Qingtang

    2008-01-01

    The recent growth of the global petroleum refining industry and the main technologies and measures for China to process inferior crude oil were introduced. The main technologies and measures include the control over equipment corrosion induced by sour and acidic crude, in particular the corrosion of atmospheric and vacuum distillation units, the development of technology for processing inferior residue,and the development of desulfurization technology and sulfur recovery technology in the course of processing of petroleum products. In order to meet the needs for national economic development, China's refining enterprises will uninterruptedly develop and prefect technologies for processing inferior crude,enhance the process and equipment management, sum up the experience for better processing of inferior crude, so as to provide high-quality oil products and petrochemical feedstocks to public with better economic return.

  1. Study on the Dacao Dam basalts quarry planning and aggregate processing system design%大草坝玄武岩料场砂石加工系统设计

    Institute of Scientific and Technical Information of China (English)

    郭磊

    2015-01-01

    通过对料场的储量、需求量、剥采比等技术指标进行准确计算分析,经技术、经济等方面的优化,选择满足工程特性的大草坝玄武岩料场开采方案和砂石加工关键工艺。大草坝料场及砂石加工系统规划设计方案的科学布置和合理选择,满足工程施工建设高峰用料需求,为施工质量和进度控制奠定了夯实基础。%Based on accurate analysis and calculation for the quarry reserves, demand, stripping ratio and other technical indicators, and through the economic & technical comparisons, the Dacao Dam basalts quarry exploiting plan and the key technology of aggregate processing which can meet the engineering characteristics has been approved. Through the scientific layout planning and reasonable selection for the planning and design scheme , it can meet the engineering construction materials using peak demand, and provide a solid foundation for the construction quality and progress control.

  2. Effect of Technological Parameters on the Quality and Dimensional Accuracy of Castings Manufactured by Patternless Process Technology

    Directory of Open Access Journals (Sweden)

    Krivoš E.

    2014-10-01

    Full Text Available Submitted article deals with the effect of selected technological parameters on the quality and dimensional accuracy of prototype castings made by Patternless process technology. During experiments were used two types of molding compounds (foamed gypsum and compound based on silica sand and resin. Experiments were focused on optimization of cutting parameters in terms of efficiency, accuracy and possibilities to minimize tool wear. Article deals also with the dimensional and shape accuracy of the castings made by Z-Cast technology. The main aim of the research is to optimize Patternless process technology to such an extent, that achieved dimensional and shape accuracy will be comparable to castings made by the Z-Cast technology.

  3. Bouncing Behavior of Microscopic Dust Aggregates

    CERN Document Server

    Seizinger, Alexander

    2013-01-01

    Context: Bouncing collisions of dust aggregates within the protoplanetary may have a significant impact on the growth process of planetesimals. Yet, the conditions that result in bouncing are not very well understood. Existing simulations studying the bouncing behavior used aggregates with an artificial, very regular internal structure. Aims: Here, we study the bouncing behavior of sub-mm dust aggregates that are constructed applying different sample preparation methods. We analyze how the internal structure of the aggregate alters the collisional outcome and determine the influence of aggregate size, porosity, collision velocity, and impact parameter. Methods: We use molecular dynamics simulations where the individual aggregates are treated as spheres that are made up of several hundred thousand individual monomers. The simulations are run on GPUs. Results: Statistical bulk properties and thus bouncing behavior of sub-mm dust aggregates depend heavily on the preparation method. In particular, there is no uni...

  4. Investigating Modern Communication Technologies: The effect of Internet-based Communication Technologies on the Investigation Process

    Directory of Open Access Journals (Sweden)

    Matthew Phillip Simon

    2011-12-01

    Full Text Available Communication technologies are commonplace in modern society. For many years there were only a handful of communication technologies provided by large companies, namely the Public Switched Telephone Network (PSTN and mobile telephony; these can be referred to as traditional communication technologies. Over the lifetime of traditional communication technologies has been little technological evolution and as such, law enforcement developed sound methods for investigating targets using them. With the advent of communication technologies that use the Internet – Internet-based or contemporary communication technologies – law enforcement are faced with many challenges. This paper discusses these challenges and their potential impact. It first looks at what defines the two technologies then explores the laws and methods used for their investigation. It then looks at the issues of applying the current methodologies to the newer and fundamentally different technology. The paper concludes that law enforcement will be required to update their methods in order to remain effective against the current technology trends.

  5. Process analytical technology tools for perfusion cell culture

    NARCIS (Netherlands)

    Mercier, S.M.; Rouel, P.M.; Lebrun, P.M.; Diepenbroek, B.; Wijffels, R.H.; Streefland, M.

    2016-01-01

    During cell cultivation processes for the production of biopharmaceuticals, good process performance and good product quality can be ensured by online monitoring of critical process parameters (e.g. temperature, pH, or dissolved oxygen). These data can be used in real-time for process control, as su

  6. The Development of Experimental Setups And Experimental Studies of The Process of Energy-Technological Processing of Wood

    Science.gov (United States)

    Timerbaev, Nail F.; Safin, Rushan G.; Ziatdinova, Dilyara F.; Fomin, Anatoly A.; Mokhovikov, Alexey A.

    2016-08-01

    The paper describes the experimental setups for the study of the various stages of the process of energy-technological processing of wood waste with the production of synthesis gas. The systems for the study of conjugated processes of drying, pyrolysis and gasification, that are an integral part of energy-technological processing of wood wastes were developed. Experimental studies of the processes have identified their basic properties and optimum operating parameters, allowing to obtain a synthesis gas suitable for the chemical synthesis of various olefins.

  7. SHAPE CHARACTERIZATION OF CONCRETE AGGREGATE

    Directory of Open Access Journals (Sweden)

    Jing Hu

    2011-05-01

    Full Text Available As a composite material, the performance of concrete materials can be expected to depend on the properties of the interfaces between its two major components, aggregate and cement paste. The microstructure at the interfacial transition zone (ITZ is assumed to be different from the bulk material. In general, properties of conventional concrete have been found favoured by optimum packing density of the aggregate. Particle size is a common denominator in such studies. Size segregation in the ITZ among the binder particles in the fresh state, observed in simulation studies by concurrent algorithm-based SPACE system, additionally governs density as well as physical bonding capacity inside these shell-like zones around aggregate particles. These characteristics have been demonstrated qualitatively pertaining also after maturation of the concrete. Such properties of the ITZs have direct impact on composite properties. Despite experimental approaches revealed effects of aggregate grain shape on different features of material structure (among which density, and as a consequence on mechanical properties, it is still an underrated factor in laboratory studies, probably due to the general feeling that a suitable methodology for shape characterization is not available. A scientific argument hindering progress is the interconnected nature of size and shape. Presently, a practical problem preventing shape effects to be emphasized is the limitation of most computer simulation systems in concrete technology to spherical particles. New developments at Delft University of Technology will make it possible in the near future to generate jammed states, or other high-density fresh particle mixtures of non-spherical particles, which thereupon can be subjected to hydration algorithms. This paper will sketch the outlines of a methodological approach for shape assessment of loose (non-embedded aggregate grains, and demonstrate its use for two types of aggregate, allowing

  8. Aggregation of Diesel Contaminated Soil for Bioremediation

    Institute of Scientific and Technical Information of China (English)

    Yu Ying; Shi Xiu-hong; Li Song; Xu Jing-gang

    2014-01-01

    Diesel contaminated soil (DCS) contained a large amount of the hydrocarbons and salt which was dominated by soluble sodium chloride. Aggregation process which made the desired aggregate size distribution could speed up the degradation rate of the hydrocarbons since the aggregated DCS had better physical characteristics than the non-aggregated material. Artificial aggregation increased pores >30 µm by approximately 5% and reduced pores <1 µm by 5%, but did not change the percentage of the pores between 1 and 30 µm. The saturated hydraulic conductivity of non-aggregated DCS was 5×10-6 m• s-l, but it increased to 1×10-5 m• s-l after aggregation. The compression index of the non-aggregated DCS was 0.0186; however, the artificial aggregates with and without lime were 0.031 and 0.028, respectively. DCS could be piled 0.2 m deep without artificial aggregation; however, it could be applied 0.28 m deep when artificial aggregates were formed without limiting O2 transport.

  9. Pre-aggregation for Probability Distributions

    DEFF Research Database (Denmark)

    Timko, Igor; Dyreson, Curtis E.; Pedersen, Torben Bach

    Motivated by the increasing need to analyze complex uncertain multidimensional data (e.g., in order to optimize and personalize location-based services), this paper proposes novel types of {\\em probabilistic} OLAP queries that operate on aggregate values that are probability distributions...... and the techniques to process these queries. The paper also presents the methods for computing the probability distributions, which enables pre-aggregation, and for using the pre-aggregated distributions for further aggregation. In order to achieve good time and space efficiency, the methods perform approximate...... multidimensional data analysis that is considered in this paper (i.e., approximate processing of probabilistic OLAP queries over probability distributions)....

  10. An Improved Processing Technology of Traditional Soybean Films

    Institute of Scientific and Technical Information of China (English)

    Jiang Yuanrong; Zhang Hui

    2002-01-01

    This paper studies on theprocessing technology of soybean films. Basedon thestatistical analysis of the traditionalsoybean films, two property indices weredetermined with Rheometer: Percent Elongation(PE) higher than 5.49%, Tensile Strength (TS)higher than 23.25 kg/cm2.As the examinedspecimen has 19.0±0.5% moisture. An improvedprocessing technology high yield of soybeanfilms was obtained. The new product has thenearly same or even higher nutrient content,property and structure as the traditional ones.The new product is consistent, flexible,smoothand transparent. The method offers morepromises for commercial-scale film production.

  11. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    Energy Technology Data Exchange (ETDEWEB)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ``demonstration technologies.`` Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria.

  12. Behavior of Heat-Denatured Whey: Buttermilk Protein Aggregates during the Yogurt-Making Process and Their Influence on Set-Type Yogurt Properties

    Directory of Open Access Journals (Sweden)

    Maxime Saffon

    2013-09-01

    Full Text Available The objective of this study was to assess the impact of using heat-denatured whey:buttermilk protein aggregate in acid-set type yogurt production. Whey and buttermilk (25:75 protein concentrate was adjusted to pH 4.6, heated at 90 °C for 5 min, homogenized and freeze-dried. Set-type yogurts were prepared from skim milk standardized to 15% (w/v total solids and 4.2% (w/v protein using different levels of powdered skim milk or freeze-dried protein aggregate. The use of the protein aggregate significantly modified yogurt texture, but did not affect the water-holding capacity of the gel. Confocal laser-scanning microscope images showed the presence of large particles in milk enriched with protein aggregate, which directly affected the homogeneity of the clusters within the protein matrix. Thiol groups were freed during heating of the protein aggregate suspended in water, suggesting that the aggregates could interact with milk proteins during heating.

  13. Behavior of Heat-Denatured Whey: Buttermilk Protein Aggregates during the Yogurt-Making Process and Their Influence on Set-Type Yogurt Properties.

    Science.gov (United States)

    Saffon, Maxime; Richard, Véronique; Jiménez-Flores, Rafael; Gauthier, Sylvie F; Britten, Michel; Pouliot, Yves

    2013-09-30

    The objective of this study was to assess the impact of using heat-denatured whey:buttermilk protein aggregate in acid-set type yogurt production. Whey and buttermilk (25:75) protein concentrate was adjusted to pH 4.6, heated at 90 °C for 5 min, homogenized and freeze-dried. Set-type yogurts were prepared from skim milk standardized to 15% (w/v) total solids and 4.2% (w/v) protein using different levels of powdered skim milk or freeze-dried protein aggregate. The use of the protein aggregate significantly modified yogurt texture, but did not affect the water-holding capacity of the gel. Confocal laser-scanning microscope images showed the presence of large particles in milk enriched with protein aggregate, which directly affected the homogeneity of the clusters within the protein matrix. Thiol groups were freed during heating of the protein aggregate suspended in water, suggesting that the aggregates could interact with milk proteins during heating.

  14. Development and commercialization of emerging infrared radiation food processing technologies

    Science.gov (United States)

    In order to demonstrate a newly developed simultaneous infrared dry-blanching and dehydration (SIRDBD) technology on an industrial scale, a mobile and continuous IR heating system was built and tested to examine its performance for SIRDBD of sliced and diced potatoes. The mobile IR heating equipment...

  15. Enhancement of Teaching-Learning Process through Multimedia Technology

    Science.gov (United States)

    Charles, R.

    2011-01-01

    The Indian educational system has to meet the challenges of knowledge explosion and its requirement of increased enrolment in higher education. Computer and technology plays a pre-dominant role to meet out its challenges. Recent innovative Educational approach recommends self and sensory oriented instruction. Computer based multimedia is a tool…

  16. The roles of carbohydrates, proteins and lipids in the process of aggregation of natural marine organic matter investigated by means of 2D correlation spectroscopy applied to infrared spectra

    Science.gov (United States)

    Mecozzi, Mauro; Pietrantonio, Eva; Pietroletti, Marco

    2009-01-01

    In this paper the marine organic matter soluble in an alkaline medium called extractable humic substance (EHS), was extracted from three sediment samples of Tyrrhenian Sea and separated by precipitation at pH 2 in the two fractions of fulvic acids (FAs) and humic acids (HAs). FAs were further fractionated in seven sub-samples of different molecular weight (mw) by means of seven different ultrafiltration membranes operating in the range between mw 100 kDa. Then the qualitative composition of each sample of fractionated FAs and HAs was studied by means of one-dimensional Fourier transform infrared spectroscopy in reflectance mode (FTIR-DRIFT) and by two-dimensional (2D) correlation spectroscopy both in wavelength-wavelength (WW) and in sample-sample (SS) mode. The application of 2D correlation WW spectroscopy allows to elucidate the different roles played by carbohydrates and proteins with respect to some lipid compounds such as fatty acids and ester fatty acids during the process of aggregate formations from mw ˜1 kDa to higher size aggregates. In addition, 2D correlation WW spectroscopy allows to observe some peculiar interactions between carbohydrates and proteins in the formation of EHS aggregates, interactions which vary from a sample to another sample. The results of 2D correlation SS spectroscopy confirm the general evidences obtained by 2D WW spectroscopy and moreover, they also describe the formation of EHS aggregates as a complex process where evolutionary links and connectivity between aggregates of neighbour molecular size ranges are not evident. Two-dimensional correlation spectroscopy applied to FTIR spectroscopy shows to be a powerful tool for the investigation of the mechanisms involved in EHS aggregation because it supports the acquisition of structural information which sometimes can be hardly obtained by one-dimensional FTIR spectroscopy.

  17. EFFECT OF UNEQUAL DEFORMATION IN DEVELOPMENT OF ADVANCED PLASTIC PROCESSING TECHNOLOGIES

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    An effect of unequal deformation in development of advanced plastic processing technologies is researched by studying an in-plane bending process of strip metal under unequal compressing. The research results show the following: If appropriately controlled, unequal plastic deformation can play an important role not only in the improvement of quality of parts obtained by plastic processing technologies, but also in the development of new processes for advanced plastic working technologies. A coordinated growth of unequal plastic deformation can develop the deformation potentiality of material to the full. The degree of unequal plastic deformation can be used as bases for optimization design of processes and dies of plastic forming.

  18. A novel approach to evaluate the spatial complexity of soil aggregates using NanoSIMS

    Science.gov (United States)

    Steffens, Markus; Rogge, Derek; Hoeschen, Carmen; Mueller, Carsten

    2015-04-01

    Soil aggregation is a key factor for a number of biogeochemical processes (e.g. soil organic matter stabilization and nutrient and pollutant sorption) in soils. Although there is a large number of studies on the factors controlling such soil processes, it is still challenging to study these processes in-situ. However it can be assumed that the spatial arrangement of biogenic and mineral soil constituents in soil aggregates and thus the aggregate structure determine the processes happening at the aggregate scale. We used the nano-scale secondary ion mass spectrometry (NanoSIMS) technology to study a cross section of a single large aggregate from the top-soil of an agricultural cropland with a regular grid of 45 measurements (each with a size of 30x30 µm). Using Cs+ as primary ion, the negatively charged ions 12C-, 12C14N-, 12C15N-, 27Al16O-, 56Fe16O- and 28Si- were collected with a lateral resolution of up to 100 nm. We applied pre-processing algorithms and unsupervised classifications to separate and identify organic and inorganic compartments in the NanoSIMS measurements. Our approach enabled us to explore the elemental and isotopic composition of organic and inorganic particles at a before unresolved lateral resolution for a complete soil aggregate and spatially explicitly map and quantify the different compartments.

  19. Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Shin

    1999-05-05

    Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

  20. Development process and manufacturing of modern medical implants with LENS technology

    OpenAIRE

    M. Balažic; D. Recek; D. Kramar; M. Milfelner; J. Kopač

    2009-01-01

    Purpose: Research and development of modern medical implants is complex and demanding process focused on fulfilling requirements regarding materials, machining technologies and functionality. Typical example of modern medical implant is elbow nail for fixation of Caput radii fractures. It could be manufactured with classical machining technologies and with advanced Rapid Prototyping technologies such as highly targeted metal deposition technology LENS (Laser Engineered Net Shaping).Design/met...

  1. Progress and Outlook for Silicon Solar Cell Process Technology (Environmental Problem)

    OpenAIRE

    永吉, 浩

    2000-01-01

    An over view of recent solar cell development program and Si solar cell process technology are presented. In the past 5 years, the PV production has drastically increased. To cover the large amount of PV demand in future, novel Si material production technology and development of the thin film Si cell technology are needed. To improve the efficiency of thin film Si cells, surface passivation technology will be more important. To improve the stability of a-Si : H solar cells, microcrystalline ...

  2. Methodology for Web Services Adoption Based on Technology Adoption Theory and Business Process Analyses

    Institute of Scientific and Technical Information of China (English)

    AN Liping; YAN Jianyuan; TONG Lingyun

    2008-01-01

    Web services use an emerging service-oriented architecture for distributed computing. Many organizations are either in the process of adopting web services technology or evaluating this option for incorporation into their enterprise information architectures. Implementation of this new technology requires careful assessment of the needs and capabilities of an organization to formulate adoption strategies. This paper presents a methodology for web services adoption based on technology adoption theory and business process analyses. The methodology suggests that strategies, business areas, and functions within an organization should be considered based on the existing organizational information technology status during the process of adopting web services to support the business needs and requirements.

  3. Technologies for Collaborative Business Process Management : proceedings of the 1st International Workshop on technologies for Collaborative Business Process Management - TCoB 2006

    NARCIS (Netherlands)

    Sadiq, Shazia; Reichert, Manfred; Schulz, Karsten

    2006-01-01

    Business process management (BPM) has become an extensive area of research with several specialized aspects. BPM is viewed from highly diverse angles ranging from a management strategy to a software system. It is widely acknowledged that process enforcement technologies hold the potential to provide

  4. A Design Perspective on Aligning Process-Centric and Technology-Centric Approaches

    DEFF Research Database (Denmark)

    Siurdyban, Artur; Svejvig, Per; Møller, Charles

    2012-01-01

    is to propose a direction towards aligning process-centric and technology-centric approaches. Using the case study method, we gain insight into two implementation projects: one of an information technology (IT) system and one of a process. We compare them using design thinking and strategic alignment theories...

  5. AUTOMATED SYSTEM OF DATA PROCESSING WITH THE IMPLEMENTATION OF RATING TECHNOLOGY OF TEACHING

    Directory of Open Access Journals (Sweden)

    О. И. Дзювина

    2014-01-01

    Full Text Available Rating technology of teaching enables independent and individual work of students, increase their motivation.Purpose: to increase the efficiency of data processing with the implementation of rating technology of teaching.Method: analysis, synthesis,experiment.Results. Developed an automated data processing system for the implementation of rating technology of teaching.Practical implication. Education.Purchase on Elibrary.ru > Buy now

  6. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Diaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Hukkerikar, Amol

    of these unit operations with respect to performance parameters such as minimum total cost, product yield improvement, operability etc., and process intensification for the retrofit of existing biofuel plants. In the fourth level the information and models developed are used as building blocks...... in the upcoming years major challenges in terms of design and development of better products and more sustainable processes. Although the oleo chemical industry is mature and based on well established processes, the complex systems that lipid compounds form, the lack of accurate predictive models...... for their physical properties and unit operation models for their processing have limited computeraided methods and tools for process synthesis, modeling and simulation to be widely used for design, analysis, and optimization of these processes. In consequence, the aim of this work is to present the development...

  7. Synthetic Intelligent Fault Diagnosis Technology for Complex Process

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A fault diagnosis method of knowledge-based fuzzy neural network is proposed for complex process, which is hard to develop practical mathematical model. Fault detection is performed through a knowledge-based system, where fault detection heuristic rules have been generated from deep and shallow knowledge of the process. The fuzzy neural network performs the fault diagnosis task. This method does not need practical mathematical models of objects, so it is a strong implement for complex process.

  8. Accelerated Numerical Processing API Based on GPU Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The recent performance increases in graphics processing units (GPUs) have made graphics cards an attractive platform for implementing computationally intense...

  9. Unsteady catalytic processes and sorption-catalytic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Zagoruiko, A N [G.K. Boreskov Institute of Catalysis, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2007-07-31

    Catalytic processes that occur under conditions of the targeted unsteady state of the catalyst are considered. The highest efficiency of catalytic processes was found to be ensured by a controlled combination of thermal non-stationarity and unsteady composition of the catalyst surface. The processes based on this principle are analysed, in particular, catalytic selective reduction of nitrogen oxides, deep oxidation of volatile organic impurities, production of sulfur by the Claus process and by hydrogen sulfide decomposition, oxidation of sulfur dioxide, methane steam reforming and anaerobic combustion, selective oxidation of hydrocarbons, etc.

  10. Electrochemical materials and processes in Si integrated circuit technology

    Energy Technology Data Exchange (ETDEWEB)

    Dubin, V.M. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States)]. E-mail: valery.m.dubin@intel.com; Akolkar, R. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States); Cheng, C.C. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States); Chebiam, R. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States); Fajardo, A. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States); Gstrein, F. [Intel Corp., Components Research, Hillsboro, OR 97124 (United States)

    2007-02-10

    Various technical issues related to feature scaling and recent electrochemical technologies advances for on-chip copper interconnects at Intel are reviewed. Effects of additives on electroplating, as well as performance of novel Cu direct plating on ruthenium liner are discussed. An electroless cobalt capping layer of Cu lines, which led to increased electromigration resistance, has been characterized. The potential application of carbon nanotubes as future interconnects materials, their properties and controlled placement by using dielectrophoresis are also reviewed.

  11. Fluid Bed Technology: Overview and Parameters for Process Selection

    OpenAIRE

    Saurabh Srivastava; Garima Mishra

    2010-01-01

    Formulation development is the most emerging and upcoming face of pharmaceutical technology in the current era. It is contemporarily capturing the market leaps and bounds with recent trends and developments with its innovative techniques. The day-to-day advancements in the research have provided an edge to this brilliant branch of pharmaceutical sector for not only uplifting the pharmacy profession but also to conquer the diseased state for nurturing the health and humanity. The fluid-bed tec...

  12. Integrated System Technologies for Modular Trapped Ion Quantum Information Processing

    Science.gov (United States)

    Crain, Stephen G.

    Although trapped ion technology is well-suited for quantum information science, scalability of the system remains one of the main challenges. One of the challenges associated with scaling the ion trap quantum computer is the ability to individually manipulate the increasing number of qubits. Using micro-mirrors fabricated with micro-electromechanical systems (MEMS) technology, laser beams are focused on individual ions in a linear chain and steer the focal point in two dimensions. Multiple single qubit gates are demonstrated on trapped 171Yb+ qubits and the gate performance is characterized using quantum state tomography. The system features negligible crosstalk to neighboring ions (system photon collection efficiency is increased from 2.2% to 3.4%, which allows for fast state detection of the qubit. For a detection beam intensity of 11 mW/cm 2, the average detection time is 23.7 mus with 99.885(7)% detection fidelity. The technologies demonstrated in this thesis can be integrated to form a single quantum register with all of the necessary resources to perform local gates as well as high fidelity readout and provide a photon link to other systems.

  13. Press Hardening Steel (PHS): a new coating and process technology

    Energy Technology Data Exchange (ETDEWEB)

    Faderl, J. [voestalpine Stahl Linz GmbH (Austria); Vehof, R. [Polynorm N.V., Bundschoten (Netherlands)

    2005-07-01

    Press hardening technology has been known for many years. Increased requirements with respect to safety and light weight construction of the steel body for cars and trucks force the automotive industry to use high strength steels more and more. Strength levels up to 1000 MPa can be provided with AHSS grades. Above 1000 MPa, these steel grades are coming to their limit with respect to strength vs. formability balance. PHS is a very attractive alternative concept. Hardenable 22MnB5 has been supplied - uncoated - for a long time. To avoid decarburization during heat treatment and to improve corrosion behaviour hot dip aluminized 22MnB5 was introduced to the market. Both materials, uncoated and hot dip aluminized, do not provide cathodic corrosion protection without postcoating (sheradizing..). In the last two years an improved press hardening technology and a zinc based coating providing cathodic protection was developed by voestalpine. Some results about strength homogeneity, formability, corrosion behaviour of this voestalpine-PHS technology will be presented in the paper. (orig.)

  14. Hierarchical nitrogen and cobalt co-doped TiO{sub 2} prepared by an interface-controlled self-aggregation process

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shishuai; Li, Qiang; Hou, Chengcheng; Feng, Xiaodong; Guan, Zisheng, E-mail: zishengguan@163.com

    2013-10-25

    Highlights: •N–Co-codoped TiO{sub 2} was prepared by hydrothermal method at vapor–liquid interface. •Hierarchical N–Co-codoped TiO{sub 2} was synthesized. •Growth mechanism of N–Co-codoped TiO{sub 2} was discussed. •Ferromagnetism was found on the titanate N–Co-codoped TiO{sub 2} at room temperature. •Light absorption edge of N–Co-codoped TiO{sub 2} was shifted to visible light region. -- Abstract: Hierarchical N and Co co-doped TiO{sub 2} (NCT) self-aggregates were prepared by the interfacial self-aggregation in an autoclave, where a mixed Ti(SO{sub 4}){sub 2} and Co(NO{sub 3}){sub 2} solution reacted with polyacrylate-controlled-releasing ammonia at the vapor–liquid interface. The SEM images show that the typical hierarchical NCT self-aggregates were composed of perpendicular nanosheets on the top, granule aggregates in the middle, and flower-like nanosheets at the bottom. A possible mechanism of their formation has been proposed on the basis of a series of experiments. We found that the morphology and crystal structure of the NCT self-aggregates can be controlled by adjusting reaction temperature, reaction time, and the amount of ammonia solution. The demonstration of hysteresis loops in the magnetization curves indicates that the NCT self-aggregate samples prepared at 150 °C were ferromagnetic at room temperature. The absorption spectra of the samples prepared at 150 °C showed evident absorption in the visible region. These NCT self-aggregates may be potentially useful in photoelectrochemical and magneto-electronic applications.

  15. Oil shale, tar sand, coal research, advanced exploratory process technology, jointly sponsored research. Quarterly technical progress report, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    Progress made in five areas of research is described briefly. The subtask in oil shale research is on oil shale process studies. For tar sand the subtask reported is on process development. Coal research includes the following subtasks: Coal combustion; integrated coal processing concepts; and solid waste management. Advanced exploratory process technology includes the following: Advanced process concepts; advanced mitigation concepts; oil and gas technology. Jointly sponsored research includes: Organic and inorganic hazardous waste stabilization; CROW{sup TM} field demonstration with Bell Lumber and Pole; development and validation of a standard test method for sequential batch extraction fluid; operation and evaluation of the CO{sup 2} HUFF-N-PUFF Process; fly ash binder for unsurfaced road aggregates; solid-state NMR analysis of Mesaverde Group, Greater Green River Basin, tight gas sands; characterization of petroleum residua; shallow oil production using horizontal wells with enhanced oil recovery techniques; surface process study for oil recovery using a thermal extraction process;NMR analysis of samples from the ocean drilling program; oil field waste cleanup using tank bottom recovery process; remote chemical sensor development; in situ treatment of manufactured gas plant contaminated soils demonstration program; solid-state NMR analysis of Mowry formation shale from different sedimentary basins; solid-state NMR analysis of naturally and artificially matured kerogens; and development of effective method for the clean-up of natural gas.

  16. Dairy Technology : Principles of Milk. Properties and Processes

    NARCIS (Netherlands)

    Walstra, P.; Geurts, T.J.; Noomen, A.; Jellema, A.; Boekel, van M.A.J.S.

    1999-01-01

    This book covers the chemistry, physics, and microbiology of milk; the main unit operations applied in the manufacture of milk products; and procedures to ensure consumer safety, product quality, and efficient processing. The final section is devoted to describing the processes and interactions uniq

  17. Accelerating the Development of Hydrogenation Process and Technology in China

    Institute of Scientific and Technical Information of China (English)

    Zhang Deyi

    2002-01-01

    @@ The crude oils processed at refineries worldwide are becom ing heavier with the contents of sulfur and heavy metals increasing since the 1990s. The environmental regulations promulgated by the governments of many countries are tight ening and there is an urgent need which calls the refiners'attention to adopt clean production processes and make clean fuels.

  18. Thermal storage technologies for solar industrial process heat applications

    Science.gov (United States)

    Gordon, L. H.

    1979-01-01

    The state-of-the-art of thermal storage subsystems for the intermediate and high temperature (100 C to 600 C) solar industrial process heat generation is presented. Primary emphasis is focused on buffering and diurnal storage as well as total energy transport. In addition, advanced thermal storage concepts which appear promising for future solar industrial process heat applications are discussed.

  19. Changes on aggregation in mine waste amended with biochar and marble mud

    Science.gov (United States)

    Ángeles Muñoz, María; Guzmán, Jose; Zornoza, Raúl; Moreno-Barriga, Fabián; Faz, Ángel; Lal, Rattan

    2016-04-01

    Mining activities have produced large amounts of wastes over centuries accumulated in tailing ponds in Southeast Spain. Applications of biochar may have a high potential for reclamation of degraded soils. Distribution, size and stability of aggregates are important indices of soil physical quality. However, research data on aggregation processes at amended mining tailings with biochar are scanty. Therefore, the aim of this study was to determine the effects of seven different treatments involving biochar and marble mud (MM) on the aggregation in mine waste (MW). Seven different treatments were tested after 90 days of incubation in the laboratory. These treatments were the mix of MW and: biochar from solid pig manure (PM), biochar from cotton crop residues (CR), biochar from municipal solid waste (MSW), marble mud (MM), PM+MM, CR+MM, MSW+MM and control without amendment. High sand percentages were identified in the MW. The biochars made from wastes (PM, CR, MSW) were obtained through pyrolysis of feedstocks. The water stability of soil aggregates was studied. The data on total aggregation were corrected for the primary particles considering the sandy texture of the MW. Moreover, partial aggregation was determined for each fraction and the mean weight diameter (MWD) of aggregates was computed. Soil bulk density and total porosity were also determined. No significant differences were observed in total aggregation and MWD among treatments including the control. For the size range of >4.75 mm, there were significant differences in aggregates > 4.75 mm between CR+MM in comparison with that for CT. There were also significant differences between MSW and PM+MM for the 1-0.425 mm fraction, and between CT and MM and CR for 0.425-0.162 mm aggregate size fractions. Therefore, CR-derived biochar applied with MM enhanced stability of macro-aggregates. Furthermore, soil bulk density was also the lowest bulk density and total porosity the highest for the CR-derived biochar

  20. Assessing Factors Affecting Implementation of Information Technology Infrastructure Library Process Measurements

    Science.gov (United States)

    Peterson, Kristy

    2010-01-01

    The capability of organizations to operate on the Information Technology Infrastructure Library (ITIL) framework is reliant on ITIL process measurements. Appropriate ITIL process measurements help ensure desired outcomes, enable corrective actions to take place prior to process failure, and direct process activities towards continuous improvement.…

  1. RELATIONSHIPS BETWEEN SOIL MICROBIAL BIOMASS, AGGREGATE STABILITY AND AGGREGATE ASSOCIATED-C: A MECHANISTIC APPROACH

    Directory of Open Access Journals (Sweden)

    Patrizia Guidi

    2014-01-01

    Full Text Available For the identification of C pools involved in soil aggregation, a physically-based aggregate fractionation was proposed, and  additional pretreatments were used in the measurement of the 1-2 mm aggregate stability in order to elucidate the relevance of the role of soil microorganisms with respect to the different aggregate breakdown mechanisms. The study was carried out on three clay loam Regosols, developed on calcareous shales, known history of organic cultivation.Our results showed that the soil C pool controlling the process of stabilisation of aggregates was related to the microbial community. We identified the resistance to fast wetting as the major mechanism of aggregate stability driven by microorganims. The plausible hypothesis is that organic farming promotes fungi growth, improving water repellency of soil aggregates by fungal hydrophobic substances. By contrast, we failed in the identification of C pools controlling the formation of aggregates, probably because of the disturbance of mechanical tillage which contributes to the breakdown of soil aggregates.The physically-based aggregate fractionation proposed in this study resulted useful in the  mechanistically understanding of the role of microorganisms in soil aggregation and it might be suggested for studying the impact of management on C pools, aggregates properties and their relationships in agricultural soils.

  2. Development and application of a probabilistic evaluation method for advanced process technologies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  3. Development and application of a probabilistic evaluation method for advanced process technologies

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H.C.; Rubin, E.S.

    1991-04-01

    The objective of this work is to develop and apply a method for research planning for advanced process technologies. To satisfy requirements for research planning, it is necessary to: (1) identify robust solutions to process design questions in the face of uncertainty to eliminate inferior design options; (2) identify key problem areas in a technology that should be the focus of further research to reduce the risk of technology failure; (3) compare competing technologies on a consistent basis to determine the risks associated with adopting a new technology; and (4) evaluate the effects that additional research might have on comparisons with conventional technology. An important class of process technologies are electric power plants. In particular, advanced clean coal technologies are expected to play a key role in the energy and environmental future of the US, as well as in other countries. Research planning for advanced clean coal technology development is an important part of energy and environmental policy. Thus, the research planning method developed here is applied to case studies focusing on a specific clean coal technology. The purpose of the case studies is both to demonstrate the research planning method and to obtain technology-specific conclusions regarding research strategies.

  4. Aggregation kinetics of a simulated telechelic polymer

    Science.gov (United States)

    Wilson, Mark; Rabinovitch, Avinoam; Baljon, Arlette R. C.

    2011-12-01

    We investigate the aggregation kinetics of a simulated telechelic polymer gel. In the hybrid molecular dynamics (MD)/Monte Carlo (MC) algorithm, aggregates of associating end groups form and break according to MC rules, while the position of the polymers in space is dictated by MD. As a result, the aggregate sizes change over time. In order to describe this aggregation process, we employ master equations. They define changes in the number of aggregates of a certain size in terms of reaction rates. These reaction rates indicate the likelihood that two aggregates combine to form a large one, or that a large aggregate splits into two smaller parts. The reaction rates are obtained from the simulations for a range of temperatures. Our results indicate that the rates are not only temperature dependent, but also a function of the sizes of the aggregates involved in the reaction. Using the measured rates, solutions to the master equations are shown to be stable and in agreement with the aggregate size distribution, as obtained directly from simulation data. Furthermore, we show how temperature-induced variations in these rates give rise to the observed changes in the aggregate distribution that characterizes the sol-gel transition.

  5. The operation technology of realtime image processing system (Datacube)

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jai Wan; Lee, Yong Bum; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Park, Jin Seok

    1997-02-01

    In this project, a Sparc VME-based MaxSparc system, running the solaris operating environment, is selected as the dedicated image processing hardware for robot vision applications. In this report, the operation of Datacube maxSparc system, which is high performance realtime image processing hardware, is systematized. And image flow example programs for running MaxSparc system are studied and analyzed. The state-of-the-arts of Datacube system utilizations are studied and analyzed. For the next phase, advanced realtime image processing platform for robot vision application is going to be developed. (author). 19 refs., 71 figs., 11 tabs.

  6. WSN数据融合中的隐私保护技术研究%Research of Privacy-preserving Technology in Wireless Sensor Network Data Aggregation

    Institute of Scientific and Technical Information of China (English)

    许建; 杨庚; 陈正宇; 王海勇; 杨震

    2012-01-01

    无线传感器网络(WSN)因节点资源受限、结构自组织性等特点而对隐私保护方面有特殊需求.为此,根据隐私保护策略的不同,将现有的隐私保护算法分为基于簇结构、基于数据切片和基于加密技术3类,对CPDA、iCPDA、SMART、ESPART、CDA、RCDA、KIPDA等典型算法在计算复杂度、通信开销、时延、隐私保护性、数据完整性、入侵检测能力和融合精确性方面进行比较,总结各种算法的优缺点,并探讨WSN数据融合中隐私保护技术的下一步研究方向.%The special characteristics of Wireless Sensor Network(WSN), such as resource constraints and self-organizing nature of its architecture, introduce unique challenges for privacy preservation in WSN. The privacy-preserving aggregation techniques are classified into three categories: cluster-based, slice-based and encrypt-based depending on the protocol operation. It reviews the existing techniques for privacy-preserving data aggregation, including CPDA, iCPDA, SMART, ESPART, CDA, RCDA, KJPDA and so on, evaluates their performances in terms of several metrics, such as computation complexity, communication complexity, delay, privacy, accuracy, and then summarizes the pros and cons of each algorithm. Some important future research directions in the field of privacy-preserving data aggregation for WSN are discussed.

  7. Enzyme technology for precision functional food ingredient processes

    DEFF Research Database (Denmark)

    Meyer, Anne S.

    2010-01-01

    modification of potato starch processing residues. Such targeted enzyme-catalyzed reactions provide new invention opportunities for designing functional foods with significant health benefits. The provision of well-defined naturally structured compounds can, moreover, assist in obtaining the much...

  8. Web Data Aggregation in MOLAP: Approach, Language, and Implementation

    Institute of Scientific and Technical Information of China (English)

    ZHU Yan; TANG Hui-jia; MA Yong-qiang

    2007-01-01

    This paper investigates the Web data aggregation issues in multidimensional on-line analytical processing (MOLAP) and presents a rule-driven aggregation approach. The core of the approach is defining aggregate rules. To define the rules for reading warehouse data and computing aggregates, a rule definition language - array aggregation language (AAL) is developed. This language treats an array as a function from indexes to values and provides syntax and semantics based on monads. External functions can be called in aggregation rules to specify array reading, writing, and aggregating. Based on the features of AAL, array operations are unified as function operations, which can be easily expressed and automatically evaluated. To implement the aggregation approach, a processor for computing aggregates over the base cube and for materializing them in the data warehouse is built, and the component structure and working principle of the aggregation processor are introduced.

  9. Quality and safety of fish curry processed by sous vide cook chilled and hot filled technology process during refrigerated storage.

    Science.gov (United States)

    Shakila, R Jeya; Raj, B Edwin; Felix, N

    2012-06-01

    Fish curry, a traditional Indian dish was prepared from farmed fish Cobia (Rachycentron canadum), packaged by two different cook-chill processes namely, sous vide cook chilled and hot filled technology and held at 2 °C. Biochemical composition revealed that fish curry contained 5% protein and 6% fat. Omega-3 fatty acids, eicosapentaenoic acid (EPA) retained 55.44% while docosahexaenoic acid (DHA) retained 29% during cook-chilling process. The major fatty acids in fish curry were C18:2, C12:0, C16:0 and C18:1. Shelf-life of sous vide cook chilled and hot filled technology processed fish curry were 8 and 12 weeks, respectively. Total bacterial counts were detected after 4 weeks and 12 weeks in sous vide cook chilled and hot filled technology processes, respectively. Total staphylococci were detected in sous vide cook chilled and hot filled technology processed cobia fish curry after 4 and 12 weeks, respectively. Total bacilli, anaerobic sulfite reducing clostridia, Salmonella, and lactic acid bacteria were absent. Hot filled technology process was more efficient and could be applied for chilled fish curry preservation for 12 weeks without any safety problems.

  10. Process and technology challenges in swift-starting virtual teams

    OpenAIRE

    Munkvold, Bjørn E.; Zigurs, Ilze

    2007-01-01

    Virtual teams often face tight schedules and a need to start quickly and perform instantly. The goal of our study was to enhance understanding of the challenges faced by such teams. We used time–interaction–performance theory as the framework for following the processes and functions within virtual teams working on a systems development task. Our study provided a detailed examination of the group process, applied to virtual teams working under time pressure. The challenges faced by virtual te...

  11. Digital image processing for the earth resources technology satellite data.

    Science.gov (United States)

    Will, P. M.; Bakis, R.; Wesley, M. A.

    1972-01-01

    This paper discusses the problems of digital processing of the large volumes of multispectral image data that are expected to be received from the ERTS program. Correction of geometric and radiometric distortions are discussed and a byte oriented implementation is proposed. CPU timing estimates are given for a System/360 Model 67, and show that a processing throughput of 1000 image sets per week is feasible.

  12. DATA PROCESSING TECHNOLOGY OF AIRBORNE 3D IMAGE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Airborne 3D image which integrates GPS,attitude measurement unit (AMU),sca nning laser rangefinder (SLR) and spectral scanner has been developed successful ly.The spectral scanner and SLR use the same optical system which ensures laser point to match pixel seamlessly.The distinctive advantage of 3D image is that it can produce geo_referenced images and DSM (digital surface models) images wi thout any ground control points (GCPs).It is no longer necessary to sur vey GCPs and with some softwares the data can be processed and produce digital s urface models (DSM) and geo_referenced images in quasi_real_time,therefore,the efficiency of 3 D image is 10~100 times higher than that of traditional approaches.The process ing procedure involves decomposing and checking the raw data,processing GPS dat a,calculating the positions of laser sample points,producing geo_referenced im age,producing DSM and mosaicing strips.  The principle of 3D image is first introduced in this paper,and then we focus on the fast processing technique and algorithm.The flight tests and processed r esults show that the processing technique is feasible and can meet the requireme nt of quasi_real_time applications.

  13. Selecting a process paradigm for an emergent disruptive technology: Evidence from the emerging microsystems technology base

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.H. [Sandia National Labs., Albuquerque, NM (United States). Intelligent Micromachine Dept.; Walsh, S.T. [New Jersey Inst. of Tech., Newark, NJ (United States). School of Industrial Management

    1998-08-01

    Emergent technologies often suffer from a lack of an installed manufacturing base and an obvious dominant manufacturing technique. Firms which base their search for competitive advantage on emergent disruptive technologies must make hard production choices and endure major manufacturing discontinuities. The authors as well as many other firms, are now facing these challenges with the embrace of microsystems technologies. They add to the literature by providing a set of criteria for firms investing in emergent disruptive technologies. Sandia has long been associated as a pioneer in the development of new manufacturing techniques. Microsystems is just the current in a long line of manufacturing technologies that have been considered for mission critical system applications. The authors as well as others, have had to make the hard choice of investing in specific microsystems manufacturing techniques. Important considerations in the technique choice include: the existing internal manufacturing bases, commonality with existing commercial manufacturing infrastructure, current and projected critical performance characteristics, learning curves, the promise to add new but un-thought-of functionally to existing systems, and the anticipated ability to qualify devices built from the technique for mission critical applications.

  14. The Role of Emerging Technologies in Improving Energy Efficiency:Examples from the Food Processing Industry

    Energy Technology Data Exchange (ETDEWEB)

    Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

    2006-05-01

    For over 25 years, the U.S. DOE's Industrial Technologies Program (ITP) has championed the application of emerging technologies in industrial plants and monitored these technologies impacts on industrial energy consumption. The cumulative energy savings of more than 160 completed and tracked projects is estimated at approximately 3.99 quadrillion Btu (quad), representing a production cost savings of $20.4 billion. Properly documenting the impacts of such technologies is essential for assessing their effectiveness and for delivering insights about the optimal direction of future technology research. This paper analyzes the impacts that several emerging technologies have had in the food processing industry. The analysis documents energy savings, carbon emissions reductions and production improvements and assesses the market penetration and sector-wide savings potential. Case study data is presented demonstrating the successful implementation of these technologies. The paper's conclusion discusses the effects of these technologies and offers some projections of sector-wide impacts.

  15. Role of multicellular aggregates in biofilm formation

    DEFF Research Database (Denmark)

    Kragh, Kasper N.; Hutchison, Jaime B.; Melaugh, Gavin

    2016-01-01

    In traditional models of in vitro biofilm development, individual bacterial cells seed a surface, multiply, and mature into multicellular, three-dimensional structures. Much research has been devoted to elucidating the mechanisms governing the initial attachment of single cells to surfaces. However......, in natural environments and during infection, bacterial cells tend to clump as multicellular aggregates, and biofilms can also slough off aggregates as a part of the dispersal process. This makes it likely that biofilms are often seeded by aggregates and single cells, yet how these aggregates impact biofilm...... initiation and development is not known. Here we use a combination of experimental and computational approaches to determine the relative fitness of single cells and preformed aggregates during early development of Pseudomonas aeruginosa biofilms. We find that the relative fitness of aggregates depends...

  16. Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

    Science.gov (United States)

    Gracheva, A. Yu.; Zav'yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P.; Egorkin, A. V.; Chasovskikh, A. V.; Pavlov, Yu. S.; Prokopenko, A. V.; Strokova, N. E.; Artem'ev, S. A.; Polyakova, S. P.

    2016-12-01

    The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

  17. Review of technologies of processing of technogenic products of copper production

    Directory of Open Access Journals (Sweden)

    A. K. Serikbayeva

    2015-10-01

    Full Text Available Extraction of rare metals from a production wastes is actually as they small quantities accompany non-ferrous metals and generally collect in products of processing of the main raw materials. In article offered technological schemes of processing of such materials were considered.In article the technological schemes of processing of waste of copper production containing rare metals are considered. The offered ways can will be applied in metallurgy to extraction of osmium and rhenium from waste.

  18. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  19. Welcome to Processes—A New Open Access Journal on Chemical and Biological Process Technology

    Directory of Open Access Journals (Sweden)

    Michael A. Henson

    2012-11-01

    Full Text Available As the result of remarkable technological progress, this past decade has witnessed considerable advances in our ability to manipulate natural and engineered systems, particularly at the molecular level. These advancements offer the potential to revolutionize our world through the development of novel soft and hard materials and the construction of new cellular platforms for chemical and pharmaceutical synthesis. For these technologies to truly impact society, the development of process technology that will enable effective large-scale production is essential. Improved processes are also needed for more established technologies in chemical and biochemical manufacturing, as these industries face ever increasing competitive pressure that mandates continuous improvement. [...

  20. UNITED STATES DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT WASTE PROCESSING ANNUAL TECHNOLOGY DEVELOPMENT REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    Bush, S.

    2009-11-05

    The Office of Waste Processing identifies and reduces engineering and technical risks and uncertainties of the waste processing programs and projects of the Department of Energy's Environmental Management (EM) mission through the timely development of solutions to technical issues. The risks, and actions taken to mitigate those risks, are determined through technology readiness assessments, program reviews, technology information exchanges, external technical reviews, technical assistance, and targeted technology development and deployment. The Office of Waste Processing works with other DOE Headquarters offices and project and field organizations to proactively evaluate technical needs, identify multi-site solutions, and improve the technology and engineering associated with project and contract management. Participants in this program are empowered with the authority, resources, and training to implement their defined priorities, roles, and responsibilities. The Office of Waste Processing Multi-Year Program Plan (MYPP) supports the goals and objectives of the U.S. Department of Energy (DOE) - Office of Environmental Management Engineering and Technology Roadmap by providing direction for technology enhancement, development, and demonstration that will lead to a reduction of technical risks and uncertainties in EM waste processing activities. The MYPP summarizes the program areas and the scope of activities within each program area proposed for the next five years to improve safety and reduce costs and environmental impacts associated with waste processing; authorized budget levels will impact how much of the scope of activities can be executed, on a year-to-year basis. Waste Processing Program activities within the Roadmap and the MYPP are described in these seven program areas: (1) Improved Waste Storage Technology; (2) Reliable and Efficient Waste Retrieval Technologies; (3) Enhanced Tank Closure Processes; (4) Next-Generation Pretreatment Solutions; (5

  1. Optimal design of upstream processes in biotransformation technologies.

    Science.gov (United States)

    Dheskali, Endrit; Michailidi, Katerina; de Castro, Aline Machado; Koutinas, Apostolis A; Kookos, Ioannis K

    2017-01-01

    In this work a mathematical programming model for the optimal design of the bioreaction section of biotechnological processes is presented. Equations for the estimation of the equipment cost derived from a recent publication by the US National Renewable Energy Laboratory (NREL) are also summarized. The cost-optimal design of process units and the optimal scheduling of their operation can be obtained using the proposed formulation that has been implemented in software available from the journal web page or the corresponding author. The proposed optimization model can be used to quantify the effects of decisions taken at a lab scale on the industrial scale process economics. It is of paramount important to note that this can be achieved at the early stage of the development of a biotechnological project. Two case studies are presented that demonstrate the usefulness and potential of the proposed methodology.

  2. Computer-Aided Modeling of Lipid Processing Technology

    DEFF Research Database (Denmark)

    Diaz Tovar, Carlos Axel

    2011-01-01

    the analysis, in terms of their design variables and their impact in the process behavior, of three lipid-related processes has been performed: the solvent recovery section of the extraction of crude soybean oil, the deodorization of palm oil, and the deacidification of soybean oil.......Vegetable oils and fats have an important role in human nutrition and in the chemical industry since they are a source of energy, fat-soluble vitamins, and now also in the production of renewable sources of energy. Nowadays as the consumer preferences for natural products and healthier foods...... this is not the case for the edible oil and biodiesel industries. The oleochemical industry lags behind the chemical industry in terms of thermophysical property modeling and development of computational tools suitable for the design/analysis, and optimization of lipid-related processes. The aim of this work has been...

  3. Biodesign process and culture to enable pediatric medical technology innovation.

    Science.gov (United States)

    Wall, James; Wynne, Elizabeth; Krummel, Thomas

    2015-06-01

    Innovation is the process through which new scientific discoveries are developed and promoted from bench to bedside. In an effort to encourage young entrepreneurs in this area, Stanford Biodesign developed a medical device innovation training program focused on need-based innovation. The program focuses on teaching systematic evaluation of healthcare needs, invention, and concept development. This process can be applied to any field of medicine, including Pediatric Surgery. Similar training programs have gained traction throughout the United States and beyond. Equally important to process in the success of these programs is an institutional culture that supports transformative thinking. Key components of this culture include risk tolerance, patience, encouragement of creativity, management of conflict, and networking effects.

  4. A study on the polymer catalyst process technology

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Kang, H. S.; Paek, S. W.; Lee, S. H.; Sung, K. W.

    1997-06-01

    Heavy water is used as moderator and coolant in Pressurized Heavy Water Power Plants. According to the governmental long-term plan for power supply Korea is scheduled to construct and operate total four pressurized heavy water power plant till the year 1999. Total heavy water make-up for these plants would be 18 Mg/a from the year 1999. Reformed hydrogen processes is considered best suited to Korea. Polymer catalysts for this process were manufactured and the performance of hydrogen isotope exchange was investigated. The overall mass transfer coefficients varied between 0.004 and 2.295 m{sup 3}.HD/m{sup 3} Bed.sec. and heavy water separation process using the catalysis were optimized. (author). 102 refs., 134 tabs., 65 figs.

  5. Applying commercial robotic technology to radioactive material processing

    Energy Technology Data Exchange (ETDEWEB)

    Grasz, E.L. (Lawrence Livermore National Lab., CA (USA)); Sievers, R.H. Jr. (Science Applications International Corp., San Diego, CA (USA))

    1990-11-01

    The development of robotic systems for glove box process automation is motivated by the need to reduce operator radiation dosage, minimize the generation of process waste, and to improve the security of nuclear materials. Commercial robotic systems are available with the required capabilities but are not compatible with a glove box environment. Alpha radiation, concentrated dust, a dry atmosphere and restricted work space result in the need for unique adaptations to commercial robotics. Implementation of these adaptations to commercial robotics require performance trade-offs. A design and development effort has been initiated to evaluate the feasibility of using a commercial overhead gantry robot for glove box processing. This paper will present the initial results and observations for this development effort. 1 ref.

  6. EMERGING TECHNOLOGY BULLETIN: NEW JERSEY INSTITUTE OF TECHNOLOGY - GHEA ASSOCIATES PROCESS

    Science.gov (United States)

    The GHEA Associates process applies surfactants and additives to soil washing and wastewater treatment to make organic and metal contaminants soluble (figure 1). The process components include a 25-gal extractor, solid liquid separation, rinse, mixer-settler, and ultrafiltration ...

  7. Social media processes in disasters: Implications of emergent technology use.

    Science.gov (United States)

    Murthy, Dhiraj; Gross, Alexander J

    2017-03-01

    This article seeks to extend social science scholarship on social media technology use during disruptive events. Though social media's role in times of crisis has been previously studied, much of this work tends to focus on first-responders and relief organizations. However, social media use during disasters tends to be decentralized and this organizational structure can promote different types of messages to top-down information systems. Using 142,786 geo-tagged tweets collected before and after Hurricane Sandy's US landfall as a case study, this article seeks to explore shifts in social media behavior during disruptive events and highlights that though Sandy disrupted routine life within Twitter, users responded to the disaster by employing humor, sharing photos, and checking into locations. We conclude that social media use during disruptive events is complex and understanding these nuanced behaviors is important across the social sciences.

  8. Enabling technologies and green processes in cyclodextrin chemistry.

    Science.gov (United States)

    Cravotto, Giancarlo; Caporaso, Marina; Jicsinszky, Laszlo; Martina, Katia

    2016-01-01

    The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs) is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

  9. Enabling technologies and green processes in cyclodextrin chemistry

    Directory of Open Access Journals (Sweden)

    Giancarlo Cravotto

    2016-02-01

    Full Text Available The design of efficient synthetic green strategies for the selective modification of cyclodextrins (CDs is still a challenging task. Outstanding results have been achieved in recent years by means of so-called enabling technologies, such as microwaves, ultrasound and ball mills, that have become irreplaceable tools in the synthesis of CD derivatives. Several examples of sonochemical selective modification of native α-, β- and γ-CDs have been reported including heterogeneous phase Pd- and Cu-catalysed hydrogenations and couplings. Microwave irradiation has emerged as the technique of choice for the production of highly substituted CD derivatives, CD grafted materials and polymers. Mechanochemical methods have successfully furnished greener, solvent-free syntheses and efficient complexation, while flow microreactors may well improve the repeatability and optimization of critical synthetic protocols.

  10. Applications of polymer extrusion technology to coal processing

    Science.gov (United States)

    Lewis, D. W.

    1981-01-01

    Upon heating, many of the middle-aged bituminous coals exhibit a plasticity very similar to polyethylene for a few minutes. Plastic coal can be extruded, pelletized or molded using common plastics technology and equipment. Investigations concerning the plastic state of coals are conducted with the objective to develop techniques which will make useful commercial applications of this property possible. Experiments which show the characteristics of plastic-state coal are discussed, and problems related to a continuous extrusion of coal are considered. Probably the most significant difference between the continuous extrusion of coal and the extrusion of a thermoplastic polymer is that volatiles are continuously being released from the coal. Attention is given to aspects of dragflow, solids feeding, and melt pumping. Application potentials for plastic coal extrusion might be related to coal gasification, direct liquefaction, and coal combustion.

  11. Applications of membrane distillation technology in energy transformation process-basis and prospect

    Institute of Scientific and Technical Information of China (English)

    WANG ZanShe; GU ZhaoLin; FENG ShiYu; LI Yun

    2009-01-01

    Membrane distillation technology is a new type of efficient separation technology that combines traditional distillation technology and membrane separation technology.In the study,applications of membrane distillation technology in thermal engineering and refrigerating engineering with typical energy transformation process were presented.Desorption and regeneration process of saline solution by vacuum membrane distillation was proposed on the basis of the concentration and separation properties of membrane distillation.Membrane distillation technology could be used in lithium bromide absorption refrigeration system,energy storage system,and the regeneration process of liquid desiccant solution in temperature-humidity independent control air-conditioning system.The aim of the applications was to use the low-grade energy such as waste heat,solar energy and geothermal energy adequately and to improve the available temperature difference of heat source.According to latent heat transfer and thermal conduction across the membrane in direct contact membrane distillation process,a novel membrane heat exchanger with both heat transfer and mass transfer processes was proposed.The heat exchanger could be used as the solution heat exchanger of lithium bromide absorption refrigeration system and as the special heat exchanger that recovered heat and pure water simultaneously.Some feasible process flows about the applications of membrane distillation technology to energy transformation process were listed and analyzed.Finally,future research emphases were indicated.

  12. Seven Processes that Enable NASA Software Engineering Technologies

    Science.gov (United States)

    Housch, Helen; Godfrey, Sally

    2011-01-01

    This slide presentation reviews seven processes that NASA uses to ensure that software is developed, acquired and maintained as specified in the NPR 7150.2A requirement. The requirement is to ensure that all software be appraised for the Capability Maturity Model Integration (CMMI). The enumerated processes are: (7) Product Integration, (6) Configuration Management, (5) Verification, (4) Software Assurance, (3) Measurement and Analysis, (2) Requirements Management and (1) Planning & Monitoring. Each of these is described and the group(s) that are responsible is described.

  13. Moving bed biofilm reactor technology: process applications, design, and performance.

    Science.gov (United States)

    McQuarrie, James P; Boltz, Joshua P

    2011-06-01

    The moving bed biofilm reactor (MBBR) can operate as a 2- (anoxic) or 3-(aerobic) phase system with buoyant free-moving plastic biofilm carriers. These systems can be used for municipal and industrial wastewater treatment, aquaculture, potable water denitrification, and, in roughing, secondary, tertiary, and sidestream applications. The system includes a submerged biofilm reactor and liquid-solids separation unit. The MBBR process benefits include the following: (1) capacity to meet treatment objectives similar to activated sludge systems with respect to carbon-oxidation and nitrogen removal, but requires a smaller tank volume than a clarifier-coupled activated sludge system; (2) biomass retention is clarifier-independent and solids loading to the liquid-solids separation unit is reduced significantly when compared with activated sludge systems; (3) the MBBR is a continuous-flow process that does not require a special operational cycle for biofilm thickness, L(F), control (e.g., biologically active filter backwashing); and (4) liquid-solids separation can be achieved with a variety of processes, including conventional and compact high-rate processes. Information related to system design is fragmented and poorly documented. This paper seeks to address this issue by summarizing state-of-the art MBBR design procedures and providing the reader with an overview of some commercially available systems and their components.

  14. Scheduling algorithms for automatic control systems for technological processes

    Science.gov (United States)

    Chernigovskiy, A. S.; Tsarev, R. Yu; Kapulin, D. V.

    2017-01-01

    Wide use of automatic process control systems and the usage of high-performance systems containing a number of computers (processors) give opportunities for creation of high-quality and fast production that increases competitiveness of an enterprise. Exact and fast calculations, control computation, and processing of the big data arrays – all of this requires the high level of productivity and, at the same time, minimum time of data handling and result receiving. In order to reach the best time, it is necessary not only to use computing resources optimally, but also to design and develop the software so that time gain will be maximal. For this purpose task (jobs or operations), scheduling techniques for the multi-machine/multiprocessor systems are applied. Some of basic task scheduling methods for the multi-machine process control systems are considered in this paper, their advantages and disadvantages come to light, and also some usage considerations, in case of the software for automatic process control systems developing, are made.

  15. Cold plasma as a nonthermal food processing technology

    Science.gov (United States)

    Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. Although well-established in non-food applications for surface treatment and modification, cold plasma is a relatively new food safety intervention. As a nonthermal food processing te...

  16. Development of technology for production of reduced fat processed cheese

    Directory of Open Access Journals (Sweden)

    Adriana Torres Silva e Alves

    2015-09-01

    Full Text Available An increasing share of foods with reduced fat has been observed in the diet of the Brazilian population, a trend also seen in many other countries. In this context, our-aim was to study the manufacturing parameters and to develop a process to produce a spreadable processed cheese (requeijão cremoso with reduced fat content. In the first stage of this study, modifications were performed in the traditional manufacturing process of requeijão cremoso with regular fat content to produce a reduced fat product. During the second stage of this study, two reduced fat cheeses, with and withoutthe addition of whey protein concentrate (WPC were developed, both using JOHA S9 and JOHA PZ as emulsifying salts, resulting in four different formulations. The amounts of cream and water used in both products were calculated in order to obtain a final product with 10% fat and 33% total solids. The product which presented the best results was produced with curd obtained by direct acidification of skimmed milk heated at 68-70 ºC, using 1,3% emulsifying salt JOHA S9 in the melting process and 2% WPC 34% as a partial fat substitute, both calculated as a percentage of the amountof curd used as raw material. It was also important to add WPC 34% to the product at the first cooking step of the process (70 ºC, in order to obtain a final product withthe typical spreadable texture of the traditional requeijão cremoso.

  17. Computational Comminution and Its Key Technologies Applied to Materials Processing Procedure

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new concept named computational comminution is proposed in this paper, which is different from the traditional studies on materials processing procedure such as the study based on theoretic models, the study based on experiment models, which is based on information models. Some key technologies applied to materials processing procedure such as artificial neural networks, fuzzy sets, genetic algorithms and visualization technology are also presented, and a fusing methodology of these new technologies is studied. Application in the cement grinding process of Horomill shows that results in this paper are efficient.

  18. Agricultural and Food Processing Applications of Pulsed Power Technology

    Science.gov (United States)

    Takaki, Koichi; Ihara, Satoshi

    Recent progress of agricultural and food processing applications of pulsed power is described in this paper. Repetitively operated compact pulsed power generators with a moderate peak power have been developed for the agricultural and the food processing applications. These applications are mainly based on biological effects and can be categorized as decontamination of air and liquid, germination promotion, inhabitation of saprophytes growth, extraction of juice from fruits and vegetables, and fertilization of liquid medium, etc. Types of pulsed power that have biological effects are caused with gas discharges, water discharges, and electromagnetic fields. The discharges yield free radicals, UV radiation, intense electric field, and shock waves. Biologically based applications of pulsed power are performed by selecting the type that gives the target objects the adequate result from among these agents or byproducts. For instance, intense electric fields form pores on the cell membrane, which is called electroporation, or influence the nuclei.

  19. A Green Method for Processing Polymers using Dense Gas Technology

    Directory of Open Access Journals (Sweden)

    Roshan B. Yoganathan

    2010-05-01

    Full Text Available Dense CO2 can be used as an environmentally-benign polymer processing medium because of its liquid-like densities and gas-like mass transfer properties.In this work, polymer bio-blends of polycarbonate (PC, a biocompatible polymer, and polycaprolactone (PCL, a biodegradable polymer were prepared. Dense CO2 was used as a reaction medium for the melt-phase PC polymerization in the presence of dense CO2-swollen PCL particles and this method was used to prepare porous PC/PCL blends. To extend the applicability of dense CO2 to the biomedical industry and polymer blend processing, the impregnation of ibuprofen into the blend was conducted and subsequent dissolution characteristics were observed.

  20. Application of pulse combustion technology in spray drying process

    Directory of Open Access Journals (Sweden)

    I. Zbicinski

    2000-12-01

    Full Text Available The paper presents development of valved pulse combustor designed for application in drying process and drying tests performed in a specially built installation. Laser technique was applied to investigate the flow field and structure of dispersed phase during pulse combustion spray drying process. PDA technique was used to determine initial atomization parameters as well as particle size distribution, velocity of the particles, mass concentration of liquid phase in the cross section of spray stream, etc., in the drying chamber during drying tests. Water was used to estimate the level of evaporation and 5 and 10% solutions of sodium chloride to carry out drying tests. The Computational Fluid Dynamics technique was used to perform theoretical predictions of time-dependent velocity, temperature distribution and particle trajectories in the drying chamber. Satisfactory agreement between calculations and experimental results was found in certain regions of the drying chamber.

  1. Finishing technologies for processing of optical microelectronic items

    Science.gov (United States)

    Muratov, K. R.; Ablyaz, T. R.; Gashev, E. A.; Khanov, A. M.; Varlamov, N. V.

    2016-10-01

    This article discusses comparative studies of the influence of specific pressure and speed of relative motion of tool and item on polishing capacity and quality of processed surface of lithium niobate single crystal. The equation for calculation of total depth of layer destroyed upon finishing and time of polishing required for its removal. Analysis of polishing tool has accounted for strength properties of the polishing material, removal capacity, and quality of processed surface of lithium niobate single crystal. It is experimentally established that upon basic pressure both for woven and unwoven polishers with the highest capacity the lower limit of grain coarseness of polishing suspension is 1/0.5 μm. A reserve of increase in shape accuracy and polishing quality is the use of polishers with equal thickness and structure of working surface.

  2. Multi-Energy Processing for Novel Coating Technologies

    Science.gov (United States)

    2014-12-18

    deposited using combustion flames assisted by infrared-laser (IR-laser) vibrational excitations of ethylene and ammonia (NH,) molecules, respectively...concentration were deposited using an ammonia -added oxyacetylene flame assisted by IR-laser vibrational excitations of the NH-wagging mode of NH3...temperature and subsequently promoted the diamond synthesis process. The temperature distribution shows large spatial gradients inside the inner cone of

  3. Supporting technology for enhanced oil recovery - EOR thermal processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This report contains the results of efforts under the six tasks of the Eighth Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section.

  4. Proctor and gamble technology process assessment for bioenergy production

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Hongqiang [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boardman, Richard Doin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wright, Christopher Todd [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-01

    P&G intends to replace as much as their current heat and power by renewable energy sources. For 2014, P&G’s total energy including electricity, natural gas and steam is approximately 1,540,000 MMBTU annually (Table 2). The biomass and wastes around P&G facility can be grouped into six categories (Figure 6): (1) Agriculture residue and grass, (2) Refuse (inorganic) solid material, (3) Food waste, (4) Organic waste stream, (5) livestock manure, (6) wastewater and sludge. The six feedstock sources can provide a total energy of 3,520,000 MMBTU per year (Table 10), among which the agriculture residue is the biggest fraction, about 67%, followed by livestock manures 27%. Therefore, the available energy sources around P&G facility are enough to meet their energy needs. These energy feedstocks would be treated by two processes: anaerobic digestion for biogas subsequently for heat and power and thermochemical process (combustion, pyrolysis and gasification) for heat and power (Figure 8 and 9). For AD, a one-stage complete mixing digester is preferable; and fluidized bed reactors are favorable for thermochemical process.

  5. Natural language processing-based COTS software and related technologies survey.

    Energy Technology Data Exchange (ETDEWEB)

    Stickland, Michael G.; Conrad, Gregory N.; Eaton, Shelley M.

    2003-09-01

    Natural language processing-based knowledge management software, traditionally developed for security organizations, is now becoming commercially available. An informal survey was conducted to discover and examine current NLP and related technologies and potential applications for information retrieval, information extraction, summarization, categorization, terminology management, link analysis, and visualization for possible implementation at Sandia National Laboratories. This report documents our current understanding of the technologies, lists software vendors and their products, and identifies potential applications of these technologies.

  6. Natural aggregates of the conterminous United States

    Science.gov (United States)

    Langer, William H.

    1988-01-01

    adversely when used as concrete aggregate. In areas where suitable natural aggregate is not available or accessible, it may become necessary to improve the quality of existing aggregate, to import aggregate from outside the area, or to substitute artificial aggregate for natural aggregate. In most cases, all of these alternatives add substantially to the cost of the final product. Even though an area may be blessed with an abundance of aggregate suitable for the intended purpose, existing land uses, zoning, or regulations may preclude commercial exploitation of the aggregate. This report also discusses the aggregate industry in general terms, including exploration, mining, and processing, as well as aggregate production rates. Proper long-range planning based on an understanding of the aggregate industry can help assure adequate supplies of aggregate.

  7. 7 Processes that Enable NASA Software Engineering Technologies: Value-Added Process Engineering

    Science.gov (United States)

    Housch, Helen; Godfrey, Sally

    2011-01-01

    The presentation reviews Agency process requirements and the purpose, benefits, and experiences or seven software engineering processes. The processes include: product integration, configuration management, verification, software assurance, measurement and analysis, requirements management, and planning and monitoring.

  8. Adhesives technology for electronic applications materials, processing, reliability

    CERN Document Server

    Licari, James J

    2011-01-01

    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book par

  9. Arsenic in industrial waste water from copper production technological process

    Directory of Open Access Journals (Sweden)

    Biljana Jovanović

    2013-12-01

    Full Text Available Investigation of arsenic in industrial waste water is of a great importance for environment. Discharge of untreated waste water from a copper production process results in serious pollution of surface water, which directly affects flora and fauna, as well as humans. There is a need for efficient and environmentally acceptable treament of waste waters containing heavy metals and arsenic. The paper presents an analyisis of the waste water from The Copper Smelter which is discharged into the Bor river. The expected arsenic content in treated waste water after using HDS procedure is also presented.

  10. Computational molecular engineering as an emerging technology in process engineering

    CERN Document Server

    Horsch, Martin; Vrabec, Jadran; Hasse, Hans

    2013-01-01

    The present level of development of molecular force field methods is assessed from the point of view of simulation-based engineering, outlining the immediate perspective for further development and highlighting the newly emerging discipline of Computational Molecular Engineering (CME) which makes basic research in soft matter physics fruitful for industrial applications. Within the coming decade, major breakthroughs can be reached if a research focus is placed on processes at interfaces, combining aspects where an increase in the accessible length and time scales due to massively parallel high-performance computing will lead to particularly significant improvements.

  11. Technology Transfer, Labour and Local Learning Processes in Malaysian Industry

    DEFF Research Database (Denmark)

    Wangel, Arne

    1999-01-01

    and trade unions to articulate their interests and define the issues, in particular with regard to the working environment and the external environment? The paper will discuss these questions by exploring the significance of labour market structures, labour-management relations, concepts of knowledge...... is meant to reduce breakdowns in production and workers' accidents. How do the training paradigms, which transnationals introduce in their subsidiaries in Malaysia, interact with the preconditions of learning with the local labour force? In shaping local learning processes, what is the scope for workers...

  12. Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

    Energy Technology Data Exchange (ETDEWEB)

    Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-10-01

    In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

  13. Teaching Methods Influencing the Sustainability of the Teaching Process in Technology Education in General Education Schools

    Science.gov (United States)

    Soobik, Mart

    2014-01-01

    The sustainability of technology education is related to a traditional understanding of craft and the methods used to teach it; however, the methods used in the teaching process have been influenced by the innovative changes accompanying the development of technology. In respect to social and economic development, it is important to prepare young…

  14. Process technology for the application of d-amino acid oxidases in pharmaceutical intermediate manufacturing

    DEFF Research Database (Denmark)

    Tindal, Stuart; Carr, Reuben; Archer, Ian V. J.

    2011-01-01

    Recent advances in biocatalysis have seen increased interest in the use of D-amino acid oxidase to synthesize optically pure amino acids. However, the creation of a genuine oxidase based platform technology will require suitable process technology as well as an understanding of the challenges and...

  15. The Technology for Intensification of Chemical Reaction Process Envisaged in the "863" Plan

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ It is learned from the Ministry of Science and Technology that in order to promote the shift of China's chemical industry toward an energy efficient and environmentally friendly product mode, the technology for intensification of chemical reaction processes has been included in the National "863" Project of the "Eleventh Five-Year Plan", and the application for research project proposals is to be accepted.

  16. Industrial benefits and future expectations in materials and processes resulting from space technology

    Science.gov (United States)

    Meyer, J. D.

    1977-01-01

    Space technology transfer is discussed as applied to the field of materials science. Advances made in processing include improved computer techniques, and structural analysis. Technology transfer is shown to have an important impact potential in the overall productivity of the United States.

  17. Modern electrochemical processes and technologies in ionic melts

    Directory of Open Access Journals (Sweden)

    Omelchuk A.

    2003-01-01

    Full Text Available An analysis of the known methods for the electrochemical purification of non-ferrous metals in ionic melts is presented. A comparative estimation of the results of the electrochemical purification of non-ferrous metals by different methods has been performed. The main regularities of the electrochemical behavior of non-ferrous metals in conventional and electrode micro-spacing electrolysis are presented. It has been found that when electrolyzing some metals, e. g. bismuth, gallium, there is either no mass exchange between the electrodes, or it occurs under filtration conditions. It has been shown that the electrode micro-spacing processes provide a high quality of non-ferrous metals purification at low specific consumption of electric power and reagents. The use of bipolar electrodes and β-alumina diaphragms hinders the transfer of metallic impurities from the anode to the cathode. The effects revealed were used to develop new processes for the separation of non-ferrous metal alloys in ionic melts; most of them have been put into practice in non-ferrous metallurgy.

  18. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Hinckley, Steve Harold

    1999-10-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  19. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    A. K. Herbst; J. A. McCray; R. J. Kirkham; J. Pao; S. H. Hinckley

    1999-09-30

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  20. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Rogers, Adam Zachary; Simmons, R. F.; Palethorpe, S. J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  1. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  2. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Argyle, Mark Don; Lauerhass, Lance; Bendixsen, Carl Lee; Hinckley, Steve Harold

    2000-11-01

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  3. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Kirkham, R.J.; Pao, J.; Argyle, M.D.; Lauerhass, L.; Bendixsen, C.L.; Hinckley, S.H.

    2000-10-31

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  4. Population balance modeling of antibodies aggregation kinetics.

    Science.gov (United States)

    Arosio, Paolo; Rima, Simonetta; Lattuada, Marco; Morbidelli, Massimo

    2012-06-21

    The aggregates morphology and the aggregation kinetics of a model monoclonal antibody under acidic conditions have been investigated. Growth occurs via irreversible cluster-cluster coagulation forming compact, fractal aggregates with fractal dimension of 2.6. We measured the time evolution of the average radius of gyration, , and the average hydrodynamic radius, , by in situ light scattering, and simulated the aggregation kinetics by a modified Smoluchowski's population balance equations. The analysis indicates that aggregation does not occur under diffusive control, and allows quantification of effective intermolecular interactions, expressed in terms of the Fuchs stability ratio (W). In particular, by introducing a dimensionless time weighed on W, the time evolutions of measured under various operating conditions (temperature, pH, type and concentration of salt) collapse on a single master curve. The analysis applies also to data reported in the literature when growth by cluster-cluster coagulation dominates, showing a certain level of generality in the antibodies aggregation behavior. The quantification of the stability ratio gives important physical insights into the process, including the Arrhenius dependence of the aggregation rate constant and the relationship between monomer-monomer and cluster-cluster interactions. Particularly, it is found that the reactivity of non-native monomers is larger than that of non-native aggregates, likely due to the reduction of the number of available hydrophobic patches during aggregation.

  5. The experimental verification of the condition of the magnetic material caused by different technological processes

    CERN Document Server

    Tumanski, S

    2000-01-01

    The changes of electrical steel parameters caused by different technological processes have been tested using the magnetovision method. The effects of cutting into the strips, stamping the shape, laser scribing, annealing, bending and stressing have been investigated.

  6. Methodology for Selection of Non-Restored Reserved Systems Pertaining to Control of Technological Processes

    Directory of Open Access Journals (Sweden)

    V. A. Anischenko

    2008-01-01

    Full Text Available The paper contains analysis of reliability of non-restored passive reserved systems pertaining to control of technological processes. Criteria have been justified and methodology for optimum selection of reserved systems has been developed.

  7. Professionalising the asphalt construction process: aligning information technologies, operators' knowledge and laboratory practices

    NARCIS (Netherlands)

    Bijleveld, Frank Roland

    2015-01-01

    This research addresses the need to professionalise the asphalt construction process. A distinctive action research strategy is designed and carried out to progressively improve operational strategies of asphalt teams from technological, human (operator) and laboratory perspectives. Using informatio

  8. DEMONSTRATION BULLETIN: CAV-OX ULTRAVIOLET OXIDATION PROCESS MAGNUM WATER TECHNOLOGY

    Science.gov (United States)

    The CAV-OX® technology (see Fig- ure 1) destroys organic contaminants, including chlorinated hy- drocarbons, in water. The process uses hydrogen peroxide, hy- drodynamic cavitation, and ultraviolet (UV) radiation to photolyze and oxidize organic compounds present in water at ...

  9. Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

    Directory of Open Access Journals (Sweden)

    Alejandra MIRANDA FELIX

    2016-06-01

    Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

  10. Planning and leading of the technological processes by mechanical working with microsoft project

    Science.gov (United States)

    Nae, I.; Grigore, N.

    2016-08-01

    Nowadays, fabrication systems and methods are being modified; new processing technologies come up, flow sheets develop a minimum number of phases, the flexibility of the technologies grows up, new methods and instruments of monitoring and leading the processing operations also come up. The technological course (route, entry, scheme, guiding) referring to the series of the operation, putting and execution phases of a mark in order to obtain the final product from the blank is represented by a sequence of activities realized by a logic manner, on a well determined schedule, with a determined budget and resources. Also, a project can be defined as a series of specific activities, methodical structured which they aim to finish a specific objective, within a fixed schedule and budget. Within the homogeneity between the project and the technological course, this research is presenting the defining of the technological course of mechanical chip removing process using Microsoft Project. Under these circumstances, this research highlights the advantages of this method: the celerity using of other technological alternatives in order to pick the optimal process, the job scheduling being constrained by any kinds, the standardization of some processing technological operations.

  11. TECHNOLOGICAL PROCESS ASSESSMENT OF THE DRINKING WATER TREATMENT AT TARGU-MURES WATER TREATMENT PLANT

    OpenAIRE

    CORNELIA DIANA HERTIA; ANCA ELENA GURZAU; MARIA ILONA SZASZ

    2011-01-01

    This paper intends to assess the technological process of obtaining drinking water at Targu-Mures water treatment plant. The assessment was performed before changing the technological process and four months were chosen to be analized during 2008: January, April, July and October for its efficiency analysis on treatment steps. Mures River is the water source for the water treatment plant, being characterized by unsteady flow and quality parameters with possible important variability in a very...

  12. A glance of technology efforts for design-for-manufacturing in nano-scale CMOS processes

    Institute of Scientific and Technical Information of China (English)

    CHENG YuHua

    2008-01-01

    This paper overviews design for manufacturing (DFM) for IC design in nano-CMOS technologies. Process/device issues relevant to the manufacturability of ICs in advanced CMOS technologies will be presented first before an exploration on process/device modeling for DFM is done. The discussion also covers a brief in-troduction of DFM-aware of design flow and EDA efforts to better handle the design-manufacturing interface in very large scale IC design environment.

  13. New technology for transmission measurements in process pipes.

    Science.gov (United States)

    Moss, C E; Favalli, A; Goda, J M; Ianakiev, K D; Lombardi, M; McCluskey, C W; Paffett, M T; Swinhoe, M T

    2013-02-01

    Transmission measurements of radiation through process pipes provide a non-intrusive method of determining the amount of product present in the pipes. The product could be a liquid, a slurry, or a gas, which is the most challenging because of the low density. Traditionally, these techniques have used a radioactive source that has to be replaced periodically. We have developed a transmission technique based on an X-ray tube instead of a decaying source. A notch filter is used to provide a narrow transmission line, and a thin silicon transmission detector is used to monitor the X-ray tube output. The transmitted X-rays are measured with a high-throughput gamma spectrometer that consists of a NaI(Tl) detector and an MCA with precise dead time correction. This spectrometer provides stable transmission measurements with an accuracy of a fraction of a percent. The shielding and collimator are made of machinable tungsten for thermal mechanical stability, as well low-cost, low-weight tungsten powder in polymer castings. We describe two methods of measuring the pipe wall thickness without evacuating the pipe. Our particular application was for enrichment monitors for UF(6) in process pipes. Enrichment monitors that are independent of the plant data require two measurements: a transmission measurement to determine the total amount of uranium in the pipe and a measurement of the 186-keV gamma-ray line to determine the amount of (235)U present. The ratio of these values gives the enrichment. Previous designs used a decaying radioactive source such as (57)Co (122 keV, T(½)=272 days) or (109)Cd (22 keV, T(½)=1.2 years). A major effort was required to access and periodically replace these sources in operating plants. In this report, we describe the use of an X-ray tube, which eliminated the source problem, and other innovations. Then we present data from an enrichment monitor that incorporates these innovations.

  14. RESOURCE SAVING TECHNOLOGICAL PROCESS OF LARGE-SIZE DIE THERMAL TREATMENT

    Directory of Open Access Journals (Sweden)

    L. A. Glazkov

    2009-01-01

    Full Text Available The given paper presents a development of a technological process pertaining to hardening large-size parts made of die steel. The proposed process applies a water-air mixture instead of a conventional hardening medium that is industrial oil.While developing this new technological process it has been necessary to solve the following problems: reduction of thermal treatment duration, reduction of power resource expense (natural gas and mineral oil, elimination of fire danger and increase of process ecological efficiency. 

  15. Supporting technology for enhanced oil recovery for thermal processes

    Energy Technology Data Exchange (ETDEWEB)

    Reid, T.B.; Bolivar, J.

    1997-12-01

    This report contains the results of efforts under the six tasks of the Ninth Amendment and Extension of Annex IV, Enhanced Oil Recovery Thermal Processes of the Venezuela/USA Agreement. The report is presented in sections (for each of the 6 tasks) and each section contains one or more reports prepared by various individuals or groups describing the results of efforts under each of the tasks. A statement of each task, taken from the agreement, is presented on the first page of each section. The tasks are numbered 62 through 67. The first, second, third, fourth fifth, sixth, seventh, eighth, and ninth reports on Annex IV, [Venezuela MEM/USA-DOE Fossil Energy Report IV-1, IV-2, IV-3, IV-4, IV-5, IV-6, IV-7, and IV-8 (DOE/BETC/SP-83/15, DOE/BC-84/6/SP, DOE/BC-86/2/SP, DOE/BC-87/2/SP, DOE/BC-90/1/SP, DOE/BC-90/1/SP) (DOE/BC-92/1/SP, DOE/BC-93/3/SP, and DOE/BC-95/3/SP)] contain the results from the first 61 tasks. Those reports are dated April 1983, August 1984, March 1986, July 1987, November 1988, October 1991, February 1993, and March 1995 respectively.

  16. Small file aggregation in a parallel computing system

    Science.gov (United States)

    Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Zhang, Jingwang

    2014-09-02

    Techniques are provided for small file aggregation in a parallel computing system. An exemplary method for storing a plurality of files generated by a plurality of processes in a parallel computing system comprises aggregating the plurality of files into a single aggregated file; and generating metadata for the single aggregated file. The metadata comprises an offset and a length of each of the plurality of files in the single aggregated file. The metadata can be used to unpack one or more of the files from the single aggregated file.

  17. USE OF SPACE TECHNOLOGY IN FEDERALLY FUNDED LAND PROCESSES RESEARCH IN THE UNITED STATES.

    Science.gov (United States)

    Thorley, G.A.; McArdle, R.

    1986-01-01

    A review of the use of space technology in federally funded earth science research in the US was carried out in 1985 by the President's Office of Science and Technology Policy. Five departments and three independent agencies, representing the primary earth science research agencies in the Federal government, participated in the review. The review by the subcommittee indicated that, while there is considerable overlap in the legislated missions of the earth science agencies, most of the space-related land processes research is complementary. Summaries are provided of the current and projected uses of space technology in land processes activities within the eight Federal organizations.

  18. Some implications of the technology assessment function for the effective public decision-making process

    Science.gov (United States)

    Mayo, L. H.

    1971-01-01

    A preliminary provisional assessment of the prospects for the establishment of an adequate technology assessment function and the implications of the assessment function for the public decision process are presented. Effects of the technology assessment function on each phase of the public decision process and briefly explored. Significant implications during the next decade are projected with respect to the following phases: invention and development of alternative means (technological configurations); evaluation, selection and promotion of preferred courses of action; and modification of statutory scheme or social action program as an outcome of continuing monitoring and appraisal.

  19. Effect of water deficit and domestic storage on the procyanidin profile, size, and aggregation process in pear-jujube (Z. jujuba) fruits.

    Science.gov (United States)

    Collado-González, J; Cruz, Z N; Rodríguez, P; Galindo, A; Díaz-Baños, F G; García de la Torre, J; Ferreres, F; Medina, S; Torrecillas, A; Gil-Izquierdo, A

    2013-07-03

    No information exists on the proanthocyanidin content of pear-jujube (Ziziphus jujuba Mill) fruit, their polymeric types and sizes, and their self-aggregation, or on the effect of different water deficit levels during the fruit maturation period on these compounds. Two trimers, two tetramers, and six B type procyanidin pentamers were identified and quantified for the first time. Water deficit increased the content of procyanidins of low molecular mass, improving their potential bioavailability and possible physiological effects on human health. The tendency of procyanidins to self-aggregate was similar in the edible portion and pit, and was not affected by water deficit. The procyanidin content of fruit from well watered trees increased during domestic cold storage, whereas the fruits from trees suffering severe water stress lost some of their procyanidin content.

  20. Aggregate growth in a protoplanetary disk

    Science.gov (United States)

    Xiang, Chuchu; Carballido, Augusto; Matthews, Lorin; Hyde, Truell

    2017-01-01

    We present a method to model the growth of neutral and charged dusts in a turbulent protoplanetary disk, and analyze their collision probabilities. Coagulation of dust aggregates plays an important role in the formation of planets and is of key importance to the evolution of protoplanetary disks. In our method, the temporal evolution of the dusts is followed by Monte Carlo algorithm, and the inter-particle interactions are calculated by Aggregate_Builder (AB), which is a code used to model the collision process of aggregates. First an aggregate library is built and all the aggregates are binned according to their sizes. In each iteration, the collision rate for aggregates from any two bins are computed, which determines the time it takes for the next collision to happen and which two aggregates are selected for collision. Then the AB codes are used to calculate the interaction of the two aggregates. The relative velocity between the two aggregates is the vector sum of Brownian velocity and the turbulent velocity. The latter is calculated by ATHENA, which is a grid-based code for astrophysical magnetohydrodynamics. In each iteration, it’s determined whether the two aggregates hit or miss. In the case of hit, it either sticks or bounces as determined by the critical velocity. As a result, the neutral aggregates are more porous than the charged ones. For a certain size of incoming aggregates, the neutral ones have a higher collision probability than the charged ones. Also, similarly-sized aggregates have lower collision probabilities than aggregates with large size dispersions. This research enables us to determine which physical properties have a greater impact on the collision rate. By tracing the dust size distribution, we can identify the stage when they settle out to the mid-plane and how long it takes to develop to that stage. In the hit-stick regime, our results are consistent with the experiments which shows that when the velocity is smaller than the

  1. Proposal of a flowchart for the development process of Assistive Technology products

    Directory of Open Access Journals (Sweden)

    Fernanda do Nascimento Maia

    2014-12-01

    Full Text Available In exploratory interviews and unsystematic observations with professionals working in the field of rehabilitation of persons with disabilities, we observed that there is a lack of systematic development in the process of assistive technology resources, resulting in products with low quality of usability. The main objective of the present study was to contribute, through a methodological proposal, to the formation of occupational therapists in the process of developing objects for persons with disabilities. The methodology used was a brief review of the steps taken in this research. The survey was conducted and recorded relying on the following steps: literature review; organization of the research project; presentation of data from field research conducted with occupational therapists who produce objects of assistive technology; assessment and interview with users; application of questionnaires to teachers of assistive technology disciplines; interviews with occupational therapists who perform making assistive technology products to other professionals; proposal of a flowchart for the development of assistive technology resources.

  2. Application of a high-throughput process analytical technology metabolomics pipeline to Port wine forced ageing process

    OpenAIRE

    2014-01-01

    Metabolomics aims at gathering the maximum amount of metabolic information for a total interpretation of biological systems. A process analytical technology pipeline, combining gas chromatography–mass spectrometry data preprocessing with multivariate analysis, was applied to a Port wine “forced ageing” process under different oxygen saturation regimes at 60 °C. It was found that extreme “forced ageing” conditions promote the occurrence of undesirable chemical reactions by production of di...

  3. Topics about steel technologies. 2. ; Semi-solidification process. Tekko gijutsu topics. 2. ; Hangyoko kako process

    Energy Technology Data Exchange (ETDEWEB)

    Kawakami, M.

    1993-04-01

    This paper describes features, the current status and examples of studies on the metal semi-solidification process. This process provides fine and uniform grain structures without coarse dendrite, internal defects, and segregation. The process uses a low processing pressure that makes uniform processing easier, and can make new composite materials and alloys with new components because of high viscosity in slurry. The thixomolding that combines a semi-melting process with the semi-solidification process is expected of the early realization of its use because it is easier in controlling metal crystal shapes, processing temperatures, and viscosity during processing than in the rheocasting. Research and development efforts in other countries are addressed to developing cryogenic casting processes for mass-produced steel materials aimed at reducing segregation, and studying a process to supply semi-solidified metal slurries to different manufacturing processes to fabricate difficult-to-process materials and functional materials into a near net shape. Studies include identification of relationship between cooling rates and stirring rates affecting crystal shapes, understanding of formability and transformation behavior of semi-solidified metals, and introduction of viscosity inferring equations. 3 figs., 1 tab.

  4. Measuring process performance within healthcare logistics - a decision tool for selecting track and trace technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Monitoring tasks and ascertaining quality of work is difficult in a logistical healthcare process due to cleaning personnel being dispersed throughout the hospital. Performance measurement can support the organization in improving the efficiency and effectiveness of processes and in ensuring...... quality of work. Data validity is essential for enabling performance measurement, and selecting the right technologies is important to achieve this. A case study of the hospital cleaning process was conducted at a public Danish hospital to develop a framework for assessing technologies in healthcare...... logistics. A set of decision indicators was identified in the case study to assess technologies based on expected process performance. Two aspects of performance measurement were investigated for the hospital cleaning process: what to measure and how to measure it....

  5. A review of oil-suspended particulate matter aggregation--a natural process of cleansing spilled oil in the aquatic environment.

    Science.gov (United States)

    Sun, Juan; Zheng, Xilai

    2009-10-01

    It has been acknowledged that following an oil spill in coastal areas where suspended particulate matter (SPM) is rich, aggregation between oil and SPM can be naturally formed. This kind of aggregation product is termed as oil-SPM aggregates (OSAs). Because OSAs are not as sticky to the shorelines as crude oil and the oil-water contact area is greatly increased due to the formation of OSAs, both oil dispersion into the water body and oil biodegration would be significantly enhanced. In this review article, the authors (1) describe in detail the mechanism of OSA formation and controlling parameters which can influence OSA formation (the parameters discussed include the oil nature and properties, sediment types and concentrations, and the environmental factors such as salinity, temperature and mixing energy); (2) briefly review qualitative and quantitative methods used for characterization of OSA formation (two main methods used for the OSA characterization are the UV epi-fluorescence microscopy and gas chromatography equipped with flame ionization detector (GC-FID); (3) elucidate the applications of OSA formation in oil spill response strategies including natural attenuation, sediment relocation, and sediment mixing; and (4) discuss research needs in the future which would further improve our understanding of OSA formation and move towards the development of adequate oil behaviour models.

  6. Sulfur Iodine Process Summary for the Hydrogen Technology Down-Selection

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin Russ

    2009-05-01

    This report summarizes the sulfur-iodine (SI) thermochemical water splitting process for the purpose of supporting the process for evaluating and recommending a hydrogen production technology to deploy with the Next Generation Nuclear Plant (NGNP). This package provides the baseline process description as well as a comparison with the process as it was implemented in the Integrated Lab Scale (ILS) experiment conducted at General Atomics from 2006-2009.

  7. The role of Ethics in the process of Technology Transfer and Development of 206 Peugeot

    Directory of Open Access Journals (Sweden)

    Aliakbar Mazlomi

    2011-02-01

    Full Text Available Looking at the past history we find that the first phenomenon of technology transfer was taught by people who were traveling to another community and bring their technology, they move. After theindustrialization, transfer of knowledge from individuals to maintain their importance. However, now the situation for developing countries is controversial because it denied people with technical skills fromdeveloped countries to developing countries do not migrate, but the reverse is the professionals that are developing countries to developed countries loan go. Until developing countries can train your human resources specialist, they powerful companies overseas are the means of technology transfer, whether through direct investment, and whether through the sale of licenses and other means. (Noble, p. 105 - 106, 1367 Technology transfer is an important issue that should be given the capacity of countries to assess the possibility of application, absorption and its compatibility with local conditions to increase. Ie the transfer of technology and gain access to technology for its effective use for economic development and growth of countries relatively backward technology provides. (Archibugi, 2003 Today, the role of ethics in technology transfer and development is of great importance. The meaning of ethics and technology than are harvested, ethical values that have roles in the formation of modern technology. Another meaning of ethics and technology than is reached, that moral people who are dealing with technology, they must observe. It also includes technology to those that exist and sets it to those who apply and who are the analysis and criticism. In this article factors and ethical factors in the process of technology transfer and development for Peugeot 206 in Iran Khodro Company has been studied. For this purpose a questionnaire to determine and evaluate factors is designed and results are analyzed.

  8. Consumers in New Millennium: Attitudes towards Adoption of New Technologies in Purchasing Process

    Directory of Open Access Journals (Sweden)

    Kopaničová Janka

    2016-06-01

    Full Text Available The use of new technologies has brought many changes into consumer behaviour, especially into purchasing process. The aim of the article is to uncover the attitudes of different generations towards usage of new technologies in purchasing process and determine if the diffusion of innovative purchasing process is significantly different among different generations. The article presents the results of authors´ research of usage of new technologies in purchasing process, as well as attitudes towards it, among different age groups - Generation X, Y, Z and seniors. Results of hybrid research carried out by semi-structured interviews with 551 respondents show, that there are significant generational differences in all three components of attitude towards online purchase, which can be - due to its characteristics- considered the most complex use of new technologies in purchasing process. Results prove that the diffusion of innovation in the purchasing process is significantly influenced by the age group. With age the number of Innovators significantly drops and the percentage of Laggards rises. The ratio of those adopting “early” and “late” significantly changes according to age group as well. Majority of younger respondents are accepting the new technologies into purchasing process early (Innovators, Early Adopters, Early Majority. Middle-aged consumers accept the innovations proportionally - copying the Roger´s curve. Among seniors, the majority is “late” (Late Majority and Laggards.

  9. Processing Technology Research of Highland Barley%青稞加工工艺研究

    Institute of Scientific and Technical Information of China (English)

    甘济升; 贾素贤; 叶坚

    2016-01-01

    根据传统石磨加工工艺的原理,设计出青稞加工工艺,包含清理、着水、调质、熟化、冷却均质、表面清理等工序,和现化节能型炒籽及制粉技术,是一种全新的生产工艺,能生产适应市场需求的糌粑产品。%Basing on the principle of traditional stone mill processing technology, we designed the processing technology of hullessbarley. It contained cleaning, water conditioning, curing, cooling homogeneous, surface cleaning process and the energy-saving fry seed and milling technology, which is a kind of new production technology. It can meet the market demand of zanba products production.

  10. Virtual team learning: The role of collaboration process and technology affordance in team decision making

    Directory of Open Access Journals (Sweden)

    Sean Cordes

    2016-12-01

    Full Text Available The study examines two dimensions that impact virtual team decision making. One is the influence of collaboration process structure: the sequences, patterns, and routines participants use to interact and solve problems. The other is technology affordance: the strengths and weaknesses of technologies in terms of the usefulness they offer to teams when performing tasks. Some teams used a structured collaboration process with monitoring, coordination, and backup functions during a decision-making discussion. Other teams had no discussion process instructions. In addition, some teams possessed stronger technology affordance including both chat and an editable document. Other teams used chat technology alone, which offered fewer collaboration possibilities. The collaboration process and technology affordance factors were tested in an experiment in which four-person online teams worked as a personnel hiring committee. Information about four job candidates was distributed to create a hidden profile in which some information was shared across all team members, while other information was visible only to specific members. Two hundred and eight students, comprising fifty-two teams completed the study. Teams using the structured collaboration process made more accurate and higher-quality decisions. In addition, scores were higher when technology affordance included both chat and editable document tools, but this influence was not significant.

  11. INFORMATION TECHNOLOGY SERVICE MANAGEMENT PROCESSES MATURITY IN THE BRAZILIAN FEDERAL DIRECT ADMINISTRATION

    Directory of Open Access Journals (Sweden)

    Maria Albeti Vieira Vitoriano

    2015-12-01

    Full Text Available This work aims at the scrutiny of the current situation of the Information Technology Service Management practices within the Brazilian Federal Direct Administration, from the perceptions of the Information Technology Managers of twelve Ministries. The methodology used followed the Process Maturity Framework as a guideline, which is a maturity model whose patterns are described in ITIL v3. The work consists of interviews with questions related to the five maturity levels, as follows: initial, repetitive, defined, managed and optimized. Information on the five basic Information Technology Service Management processes was collected. Besides the classification of the maturity levels of the processes, the interviews allowed us to gather information about the possible causes that hinder the improvement of the maturity of the processes. The outcomes of the survey on the researched ministries showed low maturity level in all the assessed service management processes. The Incident Management Process presented the highest level of maturity, while Problem Management proved to be the most flawed one, in relation to maturity. The other assessed processes, like Change Management, Service Assets and Configuration Management and Release and Deployment Management presented some sort of homogeneity among the ministries. As for the probable causes that hinder the improvement of the maturity level of the Information Technology Service Management processes, pointed by the managers, the following one stand out: the reduced staff, the lack of resources, the gap between the organizational targets and their processes aims, and the lack of skilled labor.

  12. Integration, aggregation and exchange of farming device data

    DEFF Research Database (Denmark)

    Iftikhar, Nadeem

    2009-01-01

    Most of the farming devices produce massive amounts of data. In most of the cases, it is necessary to store this data at a central location for further processing. Due to the huge volumes of data, strategies for data aggregation procedures are very important, in order to avoid oversized data sets....... There is also an increasing need to share or exchange data with other stack holders in the farming business based on farming standards. This paper presents an integrated, effective, easy-to-use and flexible solution, which enables the farmers to integrate data from several farming devices, aggregate data...... at different granularity levels and exchange data bi-directionally with other farming systems. The paper also describes the implementation strategy based on a case study using farming standards and open source technologies....

  13. Platelet activation and aggregation

    DEFF Research Database (Denmark)

    Jensen, Maria Sander; Larsen, O H; Christiansen, Kirsten

    2013-01-01

    This study introduces a new laboratory model of whole blood platelet aggregation stimulated by endogenously generated thrombin, and explores this aspect in haemophilia A in which impaired thrombin generation is a major hallmark. The method was established to measure platelet aggregation initiated...

  14. Aggregations in Flatworms.

    Science.gov (United States)

    Liffen, C. L.; Hunter, M.

    1980-01-01

    Described is a school project to investigate aggregations in flatworms which may be influenced by light intensity, temperature, and some form of chemical stimulus released by already aggregating flatworms. Such investigations could be adopted to suit many educational levels of science laboratory activities. (DS)

  15. Application of powder recovery equipment in Maanshan artificial aggregate processing system%石粉回收设备在马鞍山人工砂石加工系统中的应用

    Institute of Scientific and Technical Information of China (English)

    毕荣君; 沈国毓

    2015-01-01

    以重庆马鞍山人工砂石加工系统为例,分析石粉回收设备在人工砂石加工系统中的应用。经过近4a的生产运行,证明该设备回收效果较好。%Taking Chongqing Maanshan artificial aggregate processing system as the example, we analyzed the application of power recovery equipment used in the artificial processing system. It shows that the recovery equipment effect is good after nearly four years of operation.

  16. Role of multicellular aggregates in biofilm formation

    DEFF Research Database (Denmark)

    Kragh, Kasper N.; Hutchison, Jaime B.; Melaugh, Gavin;

    2016-01-01

    response, may add to this ecological benefit. Our findings suggest that current models of biofilm formation should be reconsidered to incorporate the role of aggregates in biofilm initiation.IMPORTANCE During the past decades, there has been a consensus around the model of development of a biofilm......In traditional models of in vitro biofilm development, individual bacterial cells seed a surface, multiply, and mature into multicellular, three-dimensional structures. Much research has been devoted to elucidating the mechanisms governing the initial attachment of single cells to surfaces. However......, in natural environments and during infection, bacterial cells tend to clump as multicellular aggregates, and biofilms can also slough off aggregates as a part of the dispersal process. This makes it likely that biofilms are often seeded by aggregates and single cells, yet how these aggregates impact biofilm...

  17. Pre-aggregation for Probability Distributions

    DEFF Research Database (Denmark)

    Timko, Igor; Dyreson, Curtis E.; Pedersen, Torben Bach

    Motivated by the increasing need to analyze complex uncertain multidimensional data (e.g., in order to optimize and personalize location-based services), this paper proposes novel types of {\\em probabilistic} OLAP queries that operate on aggregate values that are probability distributions...... and the techniques to process these queries. The paper also presents the methods for computing the probability distributions, which enables pre-aggregation, and for using the pre-aggregated distributions for further aggregation. In order to achieve good time and space efficiency, the methods perform approximate...... computations of aggregate values. The paper also reports on the experiments with the methods. The work is motivated with a real-world case study, based on our collaboration with a leading Danish vendor of location-based services. No previous work considers the combination of the aspects of uncertain...

  18. Consumer concerns and expectations about novel food processing technologies: effects on product liking.

    Science.gov (United States)

    Cardello, Armand V

    2003-06-01

    Eighty-eight consumers participated in a blind pre-test in which they rated their baseline preference for chocolate pudding, their liking of three tasted brands of chocolate pudding, and their level of concern for 20 different food processing and preservation technologies. All returned one month later and tasted the same puddings, but this time they were informed that they had been processed by one of several different novel or traditional food processing techniques. Different sub-groups were informed of the name of the process, the name plus a factual description of the process, or the name, the factual description, plus a benefit statement. Ratings of expected liking were obtained before and after viewing the samples, but before tasting them. Finally, subjects tasted and rated the products for actual liking and a sub-group rated their concern levels for the same 20 technologies rated in the pre-test. Pre-test results showed females to have significantly higher concern levels for all technologies. Individuals who had demonstrated a willingness to consume foods processed by one novel technology (irradiation) had lower concern ratings for all technologies. Ratings of concern were negatively correlated with expected liking for products believed to be processed by the technologies. Expected liking ratings were positively influenced by visual exposure to the product and by a safety and benefit statement. Linear regression of the change in product liking as a function of whether products were better or worse than expected supported an assimilation model of the effect of disconfirmed expectations on liking/disliking. Lastly, post-test concern levels for many of the technologies were reduced by participation in the study.

  19. An Analysis of Information Technology on Data Processing by using Cobit Framework

    Directory of Open Access Journals (Sweden)

    Surni Erniwati

    2015-09-01

    Full Text Available Information technology and processes is inter connected, directing and controlling the company in achieving corporate goals through value-added and balancing the risks and benefits of information technology. This study is aimed to analyze the level of maturity (maturity level on the data process and produced information technology recommendations that can be made as regards the management of IT to support the academic performance of the service to be better. Maturity level calculation was done by analyzing questionnaires on the state of information technology. The results of this study obtainable that the governance of information technology in data processing in Mataram ASM currently quite good. Current maturity value for the data processing has the value 2.69. This means that the company / organization already has a pattern of repeatedly done in managing the activities related to data management processes. Based on the data analysis, there is an effect on the current conditions and expected conditions can be taken solution or corrective actions to improve IT governance in the process of data management at ASM Mataram gradually.

  20. Hanford Integrated Planning Process: 1993 Hanford Site-specific science and technology plan

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This document is the FY 1993 report on Hanford Site-specific science and technology (S&T) needs for cleanup of the Site as developed via the Hanford Integrated Planning Process (HIPP). It identifies cleanup problems that lack demonstrated technology solutions and technologies that require additional development. Recommendations are provided regarding allocation of funding to address Hanford`s highest-priority technology improvement needs, technology development needs, and scientific research needs, all compiled from a Sitewide perspective. In the past, the S&T agenda for Hanford Site cleanup was sometimes driven by scientists and technologists, with minimal input from the ``problem owners`` (i.e., Westinghouse Hanford Company [WHC] staff who are responsible for cleanup activities). At other times, the problem-owners made decisions to proceed with cleanup without adequate scientific and technological inputs. Under both of these scenarios, there was no significant stakeholder involvement in the decision-making process. One of the key objectives of HIPP is to develop an understanding of the integrated S&T requirements to support the cleanup mission, (a) as defined by the needs of the problem owners, the values of the stakeholders, and the technology development expertise that exists at Hanford and elsewhere. This requires a periodic, systematic assessment of these needs and values to appropriately define a comprehensive technology development program and a complementary scientific research program. Basic to our success is a methodology that is defensible from a technical perspective and acceptable to the stakeholders.

  1. Organizing for Networked Information Technologies - Cases in Process Integration and Transformation

    DEFF Research Database (Denmark)

    The book provides seven practical examples of how Danish companies implemented new information technology in order to transform their internal and external business processes. The purpose is to share some of the companies' concerns and hopes during this implementation process, with each case...

  2. Not Missing the Future: The Case for Technology and Business Process Change

    Science.gov (United States)

    VanDenBerg, Doug

    2010-01-01

    As technology has evolved, the opportunity to transform and enhance the business processes of academic records managers has become more attractive. Many institutions embrace business-process change as a part of their ongoing strategy, but others defer--or simply avoid--any such change. But now more than ever, according to this author, it is…

  3. New technologies in the paving process need to be based on "common practice" and operators' heuristics

    NARCIS (Netherlands)

    Huerne, ter Henny; Miller, Seirgei; Dorée, André

    2007-01-01

    This paper describes an initiative that aims to integrate process mod-eling with the tacit knowledge of site personnel in order to accelerate profes-sionalism and widen the application of technology in the asphalt paving proc-ess. A preparatory study was conducted to gain insight into operational st

  4. Hocodems technology in comparison with conventional separation processes for coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    Wilczynski, P. [Heinrich Holter GmbH, Gladbeck (Germany)

    1999-11-01

    The new Hocodems technology, which is an advanced development of the Larcodems process, is presented and compared with conventional separation processes in coal preparation: Ep values and separation densities for a selected particle size range are compared. Comparisons of investment and operating costs are also made. 2 refs., 4 figs., 2 tabs.

  5. EPA SITE DEMONSTRATION OF THE INTERNATIONAL WASTE TECHNOLOGIES/GEO-CON IN SITU STABILIZATION/ SOLIDIFICATION PROCESS

    Science.gov (United States)

    This paper presents an EPA evaluation of the first field demonstration of an in situ stabilization/solidification process for contaminated soil under the EPA Superfund Innovative Technology Evaluation (SITE) program. Demonstration of this process was a joint effort of two vendors...

  6. Impact of Genomics and in Silico Related Technologies in the Drug Discovery Process

    Institute of Scientific and Technical Information of China (English)

    L(E)AUT(E),Jean-Baptiste

    2003-01-01

    In order to evaluate to what extent will genomics and in silico related technologies improve overall drug discovery process, we analyzed three studies comparing cost, time and attrition rate at each step of the drug discovery process, between standard pharmaceutical and genomics based approaches.

  7. Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review

    DEFF Research Database (Denmark)

    Simon, Levente L.; Pataki, Hajnalka; Marosi, György;

    2015-01-01

    This multiauthor review article aims to bring readers up to date with some of the current trends in the field of process analytical technology (PAT) by summarizing each aspect of the subject (sensor development, PAT based process monitoring and control methods) and presenting applications both...

  8. The Promise of NLP and Speech Processing Technologies in Language Assessment

    Science.gov (United States)

    Chapelle, Carol A.; Chung, Yoo-Ree

    2010-01-01

    Advances in natural language processing (NLP) and automatic speech recognition and processing technologies offer new opportunities for language testing. Despite their potential uses on a range of language test item types, relatively little work has been done in this area, and it is therefore not well understood by test developers, researchers or…

  9. Health Professionals' Attitudes and Educational Needs regarding New Food Processing Technologies

    Science.gov (United States)

    Delgado-Gutierrez, C.; Bruhn, C. M.

    2008-01-01

    This project evaluates the attitudes of food and health professionals to 3 new food processing technologies that have been developed to respond to consumer demands such as superior taste, longer shelf life, higher nutritional content, health benefits, and environment-friendly processing. Educational brochures for high pressure (HP), pulsed…

  10. Automation of the Technological Process to Produce Building Frame-Monolithic Modules Based on Fluoranhydrite

    Science.gov (United States)

    Fedorchuk, J.; Sadenova, M.; Rusina, O.

    2016-01-01

    The paper first proposes the automation of the technological process to produce building frame-monolithic modules from production wastes, namely technogenic anhydrite and fluoranhydrite. A functional diagram of the process automation is developed, the devices to perform control and maintenance with account of the production characteristics are chosen.

  11. Research on Technological Process Control Model of Reverse Logistics in Manufacturing System

    Institute of Scientific and Technical Information of China (English)

    CHANG Jiane; LIU Chao

    2006-01-01

    This paper has found out some important input factors of reverse logistics in manufacturing system throuth analysis and summary, and established four kinds of technological process control models of reverse logistics in manufacturing system according to different processing methods. These models embed each other that form a cubic control system of reverse logistics.

  12. Biological framework for soil aggregation: Implications for ecological functions.

    Science.gov (United States)

    Ghezzehei, Teamrat; Or, Dani

    2016-04-01

    Soil aggregation is heuristically understood as agglomeration of primary particles bound together by biotic and abiotic cementing agents. The organization of aggregates is believed to be hierarchical in nature; whereby primary particles bond together to form secondary particles and subsequently merge to form larger aggregates. Soil aggregates are not permanent structures, they continuously change in response to internal and external forces and other drivers, including moisture, capillary pressure, temperature, biological activity, and human disturbances. Soil aggregation processes and the resulting functionality span multiple spatial and temporal scales. The intertwined biological and physical nature of soil aggregation, and the time scales involved precluded a universally applicable and quantifiable framework for characterizing the nature and function of soil aggregation. We introduce a biophysical framework of soil aggregation that considers the various modes and factors of the genesis, maturation and degradation of soil aggregates including wetting/drying cycles, soil mechanical processes, biological activity and the nature of primary soil particles. The framework attempts to disentangle mechanical (compaction and soil fragmentation) from in-situ biophysical aggregation and provides a consistent description of aggregate size, hierarchical organization, and life time. It also enables quantitative description of biotic and abiotic functions of soil aggregates including diffusion and storage of mass and energy as well as role of aggregates as hot spots of nutrient accumulation, biodiversity, and biogeochemical cycles.

  13. The impact of translation-memory (TM) technology on cognitive processes

    DEFF Research Database (Denmark)

    Christensen, Tina Paulsen; Schjoldager, Anne

    2011-01-01

    The use of Translation-Memory (TM) technology and other translation software is bound to influence translators' cognitive processes. Unfortunately we still lack empirically founded knowledge of this. Our paper therefore presents and discusses the theoretical background, setup and preliminary......, and apply a simplified model of the translation process that comprises three main phases taken from a general writing model: planning, drafting and postdrafting. As far as our student-translators are concerned, TM technology seems to affect processes in all of these phases....

  14. Working operations of simple technological processes in construction industry ordering (rus

    Directory of Open Access Journals (Sweden)

    Kalyuzhnyuk A.V.

    2011-11-01

    Full Text Available Ordering process has been described by the example of the simple technological processes of reinforced concrete building structures joints welding working operations set.Methods of ordering are adopted from graph theory, expert assessment, network planning and management. The proposed method is designed for application in technical regulation for organizational effectiveness indicators of simple technological processes of construction and special types of work determining.The proposed methods improve the technical normalization quality. They are recommended for application in systems of the construction industry automated preparation.

  15. The technology of precision casting of titanium alloys by centrifugal process

    Directory of Open Access Journals (Sweden)

    A. Karwiński

    2011-07-01

    Full Text Available The article describes the development of a procedure for the preparation of foundry ceramic moulds and making first test castings. The presented studies included:development of technological parameters of the ceramic mould preparation process using water-based zirconium binders and zirconia ceramic materials, where moulds are next used for the centrifugal casting of titanium alloys melted in vacuum furnaces, designing of pouring process using simulation software, making test castings,testing and control of the casting properties. The technological process described in this paper enables making castings in titanium alloys weighing up to about 500 g and used in the majority of technical applications.

  16. Aggregation of Dodecyl 1-Pyrenylmethyl Ether and Its Application in Structure-Polarity Relations of Aggregates

    Institute of Scientific and Technical Information of China (English)

    SANG,Da-Yong; TIAN,Juan; JI,Guo-Zhen

    2006-01-01

    The aggregation behavior of dodecyl 1-pyrenylmethyl ether was studied in dioxane-water mixture solvents by fluorescence techniques. The labeled pyrenyl group was effective in monitoring the polarity change of its environment during aggregation processes. Based on the structural effects such as chain-length effect, self-coiling effect,and branch-group effect on the polarity of the probe environment, the structure features of aggregates were discussed and have been used to interpret the effect of the structural features on the aggregates formed by three cholesteryl esters and three long chain alkanes.

  17. Detection of Distribution Dimension of the Earth-rock Aggregate Based on Digital Image Process%土石分形检测中的数字图像处理方法研究

    Institute of Scientific and Technical Information of China (English)

    杜召彬; 王建勋; 平根建

    2012-01-01

    土木工程人员经常用粗料颗粒分布分维、粗料轮廓分维这些结构指标作为土石混合体定量化研究的依据,用以解释土石混合体的力学特性,并以这些参数作为土石混合体工程分类的依据。目前技术人员以手工筛分实验来计算粒度分维数。展开对土石混合体微结构研究,劳动强度大,操作不便,极大地制约了对土石混合体微结构的研究。提出了利用数字图像处理技术来测量土石混合体分形维数的方法。实验验证结果表明,该方法减轻了工程技术人员手工检测的劳动强度,实用有效。%Some parameters including distribution fractal dimension of coarse grain and coarse grain boundary contour line are used as a new research method on microstructure of earth-rock aggregate by engineering technicians, which can explain the characteristics of mechanical behavior of earth-rock aggregate. The parameters of distribution fractal dimension can also be clas- sification basis for engineering of earth-rock aggregate. Now technicians can only calculate grain-size fractal dimension by sieve analysis in manual operation way to research on the microstructure of earth-rock aggregate, which restricts the technicians' fur- ther research for its great labor intensity and its inconvenient operation. In this paper the detection of distribution fractal dimension of earth-rock aggregate base on digital image process is put forward. This method is simple and practical. It can decrease labor intensity and enriched the research method of microstructure of earth-rock aggregate for technicians.

  18. Influence of aggregate sizes and microstructures on bioremediation assessment of field-contaminated soils in pilot-scale biopiles

    Science.gov (United States)

    Chang, W.; Akbari, A.; Frigon, D.; Ghoshal, S.

    2011-12-01

    Petroleum hydrocarbon contamination of soils and groundwater is an environmental concern. Bioremediation has been frequently considered a cost-effective, less disruptive remedial technology. Formation of soil aggregate fractions in unsaturated soils is generally believed to hinder aerobic hydrocarbon biodegradation due to the slow intra-pore diffusion of nutrients and oxygen within the aggregate matrix and to the reduced bioavailability of hydrocarbons. On the other hand, soil aggregates may harbour favourable niches for indigenous bacteria, providing protective microsites against various in situ environmental stresses. The size of the soil aggregates is likely to be a critical factor for these processes and could be interpreted as a relevant marker for biodegradation assessment. There have been only limited attempts in the past to assess petroleum hydrocarbon biodegradation in unsaturated soils as a function of aggregate size. This study is aimed at investigating the roles of aggregate sizes and aggregate microstructures on biodegradation activity. Field-aged, contaminated, clayey soils were shipped from Norman Wells, Canada. Attempts were made to stimulate indigenous microbial activity by soil aeration and nutrient amendments in a pilot-scale biopile tank (1m L×0.65m W×0.3 m H). A control biopile was maintained without the nutrient amendment but was aerated. The initial concentrations of petroleum hydrocarbons in the field-contaminated soils increased with increasing aggregate sizes, which were classified in three fractions: micro- (250-2000 μm) and macro-aggregates (>2000 μm). Compared to the TPH analyses at whole-soil level, the petroleum hydrocarbon analyses based on the aggregate-size levels demonstrated more clearly the extent of biodegradation of non-volatile, heavier hydrocarbons (C16-C34) in the soil. The removal of the C16-C34 hydrocarbons was 44% in macro-aggregates, but only 13% in meso-aggregates. The increased protein concentrations in macro-aggregates

  19. Approximation of Aggregate Losses Using Simulation

    Directory of Open Access Journals (Sweden)

    Mohamed A. Mohamed

    2010-01-01

    Full Text Available Problem statement: The modeling of aggregate losses is one of the main objectives in actuarial theory and practice, especially in the process of making important business decisions regarding various aspects of insurance contracts. The aggregate losses over a fixed time period is often modeled by mixing the distributions of loss frequency and severity, whereby the distribution resulted from this approach is called a compound distribution. However, in many cases, realistic probability distributions for loss frequency and severity cannot be combined mathematically to derive the compound distribution of aggregate losses. Approach: This study aimed to approximate the aggregate loss distribution using simulation approach. In particular, the approximation of aggregate losses was based on a compound Poisson-Pareto distribution. The effects of deductible and policy limit on the individual loss as well as the aggregate losses were also investigated. Results: Based on the results, the approximation of compound Poisson-Pareto distribution via simulation approach agreed with the theoretical mean and variance of each of the loss frequency, loss severity and aggregate losses. Conclusion: This study approximated the compound distribution of aggregate losses using simulation approach. The investigation on retained losses and insurance claims allowed an insured or a company to select an insurance contract that fulfills its requirement. In particular, if a company wants to have an additional risk reduction, it can compare alternative policies by considering the worthiness of the additional expected total cost which can be estimated via simulation approach.

  20. Structure and kinetics of shear aggregation in turbulent flows. I. Early stage of aggregation.

    Science.gov (United States)

    Bäbler, Matthäus U; Moussa, Amgad S; Soos, Miroslav; Morbidelli, Massimo

    2010-08-17

    Aggregation of rigid colloidal particles leads to fractal-like structures that are characterized by a fractal dimension d(f) which is a key parameter for describing aggregation processes. This is particularly true in shear aggregation where d(f) strongly influences aggregation kinetics. Direct measurement of d(f) in the early stages of shear aggregation is however difficult, as the aggregates are small and few in number. An alternative method for determining d(f) is to use an aggregation model that when fitted to the time evolution of the cluster mass distribution allows for estimating d(f). Here, we explore three such models, two of which are based on an effective collision sphere and one which directly incorporates the permeable structure of the aggregates, and we apply them for interpreting the initial aggregate growth measured experimentally in a turbulent stirred tank reactor. For the latter, three polystyrene latexes were used that differed only in the size of the primary particles (d(p) = 420, 600, and 810 nm). It was found that all three models describe initial aggregation kinetics reasonably well using, however, substantially different values for d(f). To discriminate among the models, we therefore also studied the regrowth of preformed aggregates where d(f) was experimentally accessible. It was found that only the model that directly incorporates the permeable structure of the aggregates is able to predict correctly this second type of experiments. Applying this model to the initial aggregation kinetics, we conclude that the actual initial fractal dimension is d(f) = 2.07 +/- 0.04 as found from this model.