Phase shifting-based debris effect detection in USV-assisted AFM nanomachining

Energy Technology Data Exchange (ETDEWEB)

Shi, Jialin [State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences (CAS), Shenyang, Liaoning 110016 (China); University of the Chinese Academy of Sciences, Beijing 100049 (China); Beijing Advanced Innovation Center for Imaging Technology, Capital Normal University, Beijing 100049 (China); Liu, Lianqing, E-mail: lianqingliu@sia.cn [State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences (CAS), Shenyang, Liaoning 110016 (China); Yu, Peng; Cong, Yang [State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences (CAS), Shenyang, Liaoning 110016 (China); Li, Guangyong [Department of Electrical and Computer Engineering, University of Pittsburgh, Pittsburgh, PA 15213 (United States)

2017-08-15

Highlights: • The mechanism of the debris effect on machining depth in force control mode operation is analyzed. • The relationship between phase shifting and pile-up of debris is investigated. • The phase shifting-based method is hardly affected by the pile-up of debris. • Debris effect detection by phase shifting-based method is achived. - Abstract: Atomic force microscopy (AFM) mechanical-based lithography attracts much attention in nanomanufacturing due to its advantages of low cost, high precision and high resolution. However, debris effects during mechanical lithography often lead to an unstable machining process and inaccurate results, which limits further applications of AFM-based lithography. There is a lack of a real-time debris detection approach, which is the prerequisite to eventually eliminating the influence of the debris, and of a method that can solve the above problems well. The ultrasonic vibration (USV)-assisted AFM has the ability to sense the machining depth in real time by detecting the phase shifting of cantilever. However, whether the pile-up of debris affect the phase response of cantilever is still lack of investigation. Therefore, we analyzed the mechanism of the debris effect on force control mode and investigated the relationship between phase shifting and pile-up of debris. Theoretical analysis and experimental results reveal that the pile-up of debris have negligible effect on phase shifting of cantilever. Therefore, the phase shifting-based method can detect the debris effect on machining depth in force control mode of AFM machining.

Single molecule transcription profiling with AFM

International Nuclear Information System (INIS)

Reed, Jason; Mishra, Bud; Pittenger, Bede; Magonov, Sergei; Troke, Joshua; Teitell, Michael A; Gimzewski, James K

2007-01-01

Established techniques for global gene expression profiling, such as microarrays, face fundamental sensitivity constraints. Due to greatly increasing interest in examining minute samples from micro-dissected tissues, including single cells, unorthodox approaches, including molecular nanotechnologies, are being explored in this application. Here, we examine the use of single molecule, ordered restriction mapping, combined with AFM, to measure gene transcription levels from very low abundance samples. We frame the problem mathematically, using coding theory, and present an analysis of the critical error sources that may serve as a guide to designing future studies. We follow with experiments detailing the construction of high density, single molecule, ordered restriction maps from plasmids and from cDNA molecules, using two different enzymes, a result not previously reported. We discuss these results in the context of our calculations

Nanotechnology applications in hematological malignancies (Review)

Science.gov (United States)

SAMIR, AHMED; ELGAMAL, BASMA M; GABR, HALA; SABAAWY, HATEM E

2015-01-01

A major limitation to current cancer therapies is the development of therapy-related side-effects and dose limiting complications. Moreover, a better understanding of the biology of cancer cells and the mechanisms of resistance to therapy is rapidly developing. The translation of advanced knowledge and discoveries achieved at the molecular level must be supported by advanced diagnostic, therapeutic and delivery technologies to translate these discoveries into useful tools that are essential in achieving progress in the war against cancer. Nanotechnology can play an essential role in this aspect providing a transforming technology that can translate the basic and clinical findings into novel diagnostic, therapeutic and preventive tools useful in different types of cancer. Hematological malignancies represent a specific class of cancer, which attracts special attention in the applications of nanotechnology for cancer diagnosis and treatment. The aim of the present review is to elucidate the emerging applications of nanotechnology in cancer management and describe the potentials of nanotechnology in changing the key fundamental aspects of hematological malignancy diagnosis, treatment and follow-up. PMID:26134389

Nanotechnology-Based Detection of Novel microRNAs for Early Diagnosis of Prostate Cancer

Science.gov (United States)

2017-08-01

AWARD NUMBER: W81XWH-15-1-0157 TITLE: Nanotechnology -Based Detection of Novel microRNAs for Early Diagnosis of Prostate Cancer PRINCIPAL...TITLE AND SUBTITLE Nanotechnology -Based Detection of Novel microRNAs for Early Diagnosis of Prostate Cancer 5a. CONTRACT NUMBER 5b. GRANT NUMBER...identify novel differentially expressed miRNAs in the body fluids (blood, urine, etc.) for an early detection of PCa. Advances in nanotechnology and

Nanotechnology applications in hematological malignancies (Review).

Science.gov (United States)

Samir, Ahmed; Elgamal, Basma M; Gabr, Hala; Sabaawy, Hatem E

2015-09-01

A major limitation to current cancer therapies is the development of therapy-related side-effects and dose limiting complications. Moreover, a better understanding of the biology of cancer cells and the mechanisms of resistance to therapy is rapidly developing. The translation of advanced knowledge and discoveries achieved at the molecular level must be supported by advanced diagnostic, therapeutic and delivery technologies to translate these discoveries into useful tools that are essential in achieving progress in the war against cancer. Nanotechnology can play an essential role in this aspect providing a transforming technology that can translate the basic and clinical findings into novel diagnostic, therapeutic and preventive tools useful in different types of cancer. Hematological malignancies represent a specific class of cancer, which attracts special attention in the applications of nanotechnology for cancer diagnosis and treatment. The aim of the present review is to elucidate the emerging applications of nanotechnology in cancer management and describe the potentials of nanotechnology in changing the key fundamental aspects of hematological malignancy diagnosis, treatment and follow-up.

Nanotechnology strength indicators: international rankings based on US patents

Science.gov (United States)

Marinova, Dora; McAleer, Michael

2003-01-01

Technological strength indicators (TSIs) based on patent statistics for 1975-2000 are used to analyse patenting of nanotechnology in the USA, and to compile international rankings for the top 12 foreign patenting countries (namely Australia, Canada, France, Germany, Great Britain, Italy, Japan, Korea, the Netherlands, Sweden, Switzerland and Taiwan). As the indicators are not directly observable, various proxy variables are used, namely the technological specialization index for national priorities, patent shares for international presence, citation rate for the contribution of patents to knowledge development and rate of assigned patents for potential commercial benefits. The best performing country is France, followed by Japan and Canada. It is shown that expertise and strength in nanotechnology are not evenly distributed among the technologically advanced countries, with the TSIs revealing different emphases in the development of nanotechnology.

AFM-based force spectroscopy measurements of mature amyloid fibrils of the peptide glucagon

DEFF Research Database (Denmark)

Dong, M. D.; Hovgaard, M. B.; Mamdouh, W.

2008-01-01

We report on the mechanical characterization of individual mature amyloid fibrils by atomic force microscopy (AFM) and AFM-based single-molecule force spectroscopy (SMFS). These self-assembling materials, formed from the 29-residue amphiphatic peptide hormone glucagon, were found to display...... a reversible elastic behaviour. Based on AFM morphology and SMFS studies, we suggest that the observed elasticity is due to a force-induced conformational transition which is reversible due to the beta-helical conformation of protofibrils, allowing a high degree of extension. The elastic properties...... of such mature fibrils contribute to their high stability, suggesting that the internal hydrophobic interactions of amyloid fibrils are likely to be of fundamental importance in the assembly of amyloid fibrils and therefore for the understanding of the progression of their associated pathogenic disorders...

Nano Mechanical Machining Using AFM Probe

Science.gov (United States)

Mostofa, Md. Golam

Complex miniaturized components with high form accuracy will play key roles in the future development of many products, as they provide portability, disposability, lower material consumption in production, low power consumption during operation, lower sample requirements for testing, and higher heat transfer due to their very high surface-to-volume ratio. Given the high market demand for such micro and nano featured components, different manufacturing methods have been developed for their fabrication. Some of the common technologies in micro/nano fabrication are photolithography, electron beam lithography, X-ray lithography and other semiconductor processing techniques. Although these methods are capable of fabricating micro/nano structures with a resolution of less than a few nanometers, some of the shortcomings associated with these methods, such as high production costs for customized products, limited material choices, necessitate the development of other fabricating techniques. Micro/nano mechanical machining, such an atomic force microscope (AFM) probe based nano fabrication, has, therefore, been used to overcome some the major restrictions of the traditional processes. This technique removes material from the workpiece by engaging micro/nano size cutting tool (i.e. AFM probe) and is applicable on a wider range of materials compared to the photolithographic process. In spite of the unique benefits of nano mechanical machining, there are also some challenges with this technique, since the scale is reduced, such as size effects, burr formations, chip adhesions, fragility of tools and tool wear. Moreover, AFM based machining does not have any rotational movement, which makes fabrication of 3D features more difficult. Thus, vibration-assisted machining is introduced into AFM probe based nano mechanical machining to overcome the limitations associated with the conventional AFM probe based scratching method. Vibration-assisted machining reduced the cutting forces

Biomedical nanotechnology using virus-based nanoparticles.

Science.gov (United States)

Destito, G; Schneemann, A; Manchester, M

2009-01-01

A great challenge in biomedicine is the ability to target therapeutics to specific locations in the body in order to increase therapeutic benefit and minimize adverse effects. Virus-based nanotechnology takes advantage of the natural circulatory and targeting properties of viruses, in order to design therapeutics and vaccines that specifically target tissues of interest in vivo. Cowpea mosaic virus (CPMV) and flock house virus (FHV) nanoparticle-based strategies hold great promise for the design of targeted therapeutics, as well as for structure-based vaccine approaches.

PREFACE: Non-contact AFM Non-contact AFM

Science.gov (United States)

Giessibl, Franz J.; Morita, Seizo

2012-02-01

Kelvin probe force microscopy for Si surfaces by taking account of chemical forces Masaru Tsukada, Akira Masago and Mamoru Shimizu Reversal of atomic contrast in scanning probe microscopy on (111) metal surfaces M Ondrácek, C González and P Jelínek Mechanical properties of H2Pc self-assembled monolayers at the single molecule level by noncontact atomic force microscopy Han-Qing Mao, Na Li, Xi Chen and Qi-Kun Xue High-resolution imaging of C60 molecules using tuning-fork-based non-contact atomic force microscopy R Pawlak, S Kawai, S Fremy, T Glatzel and E Meyer NC-AFM contrast formation on the calcite (101¯4) surface Philipp Rahe, Jens Schütte and Angelika Kühnle Imaging and manipulation of adatoms on an alumina surface by noncontact atomic force microscopy G H Simon, M Heyde and H-J Freund Three-dimensional scanning force/tunneling spectroscopy at room temperature Yoshiaki Sugimoto, Keiichi Ueda, Masayuki Abe and Seizo Morita Imaging and manipulation of the Si(100) surface by small-amplitude NC-AFM at zero and very low applied biasA Sweetman, R Danza, S Gangopadhyay and P Moriarty Manipulation of individual water molecules on CeO2(111) S Torbrügge, O Custance, S Morita and M Reichling FM-AFM imaging of a commercial polyethylene film immersed in n-dodecaneTakumi Hiasa, Tomoki Sugihara, Kenjiro Kimura and Hiroshi Onishi

EDITORIAL: Bioengineering nanotechnology: towards the clinic Bioengineering nanotechnology: towards the clinic

Science.gov (United States)

Zhao, Weian; Karp, Jeffrey M.; Ferrari, Mauro; Serda, Rita

2011-12-01

The application of nanotechnology in the field of life sciences offers the potential to study biological systems with unprecedented resolution at the nanoscale, and to solve medical problems that affect millions of patients across the globe. Significant progress has been achieved over the past 2-3 decades leading to, for example, the approval of nanoformulations for delivering drugs to tumors and other diseased sites [1]. To date, nearly 30 nanotechnology-based products have been approved for clinical use, focused mainly on liposomal formulations and stealth polymer-drug conjugates. In addition to therapeutic nanoparticles for drug delivery, important topics include: (i) biomimetic nano- or micro-structured materials for tissue engineering and regenerative medical applications, (ii) nanobiosensors, particularly those lab-on-chip-based systems for disease diagnosis at the point of care, (iii) nano-probes for in vivo sensing/imaging, cell tracking and monitoring disease pathogenesis or therapy and (iv) nanotechnology-based tools that accelerate scientific discovery and elucidation of basic biology [2, 3]. Some of the exciting emerging topics involve the development of multifunctional nanoparticles that can fulfil two or more of the above-mentioned functions (e.g. theranostics that include diagnostics and therapy) [4] and the use of nano-sized materials to monitor and manipulate the fate of transplanted (stem) cells and the microenvironments where they reside in vivo [5, 6]. For example, we recently reported that nano-sized aptamer sensors that are engineered on the surface of stem cells could be delivered by cells to target niches in the body where they can potentially report the cellular functions and cell-cell communication in real-time [7]. Moreover, drug-carrying nano- or micro-particles can be conjugated with therapeutic cells prior to transplantation to enable the control of the fate and therapeutic function of cells in a sustained manner in vivo [8, 9]. This

Nanotechnology-based system for damage-resistant concrete pavements.

Science.gov (United States)

2012-08-01

The focus of this study was to explore the use of nanotechnology-based nanofilaments, such as carbon nanotubes (CNTs) and nanofibers (CNFs), as reinforcement for improving the mechanical properties of Portland cement paste and creating multifunctiona...

Nanotechnology

International Nuclear Information System (INIS)

Abdul Kadir Masrom

2005-01-01

The following subjects discussed: What is nanotechnology, Nanotechnology research and development, whats new about nanosciences, nano research facilities, impact of nanotechnology, commercially available nanotechnology, review on research status

Developing DNA nanotechnology using single-molecule fluorescence.

Science.gov (United States)

Tsukanov, Roman; Tomov, Toma E; Liber, Miran; Berger, Yaron; Nir, Eyal

2014-06-17

CONSPECTUS: An important effort in the DNA nanotechnology field is focused on the rational design and manufacture of molecular structures and dynamic devices made of DNA. As is the case for other technologies that deal with manipulation of matter, rational development requires high quality and informative feedback on the building blocks and final products. For DNA nanotechnology such feedback is typically provided by gel electrophoresis, atomic force microscopy (AFM), and transmission electron microscopy (TEM). These analytical tools provide excellent structural information; however, usually they do not provide high-resolution dynamic information. For the development of DNA-made dynamic devices such as machines, motors, robots, and computers this constitutes a major problem. Bulk-fluorescence techniques are capable of providing dynamic information, but because only ensemble averaged information is obtained, the technique may not adequately describe the dynamics in the context of complex DNA devices. The single-molecule fluorescence (SMF) technique offers a unique combination of capabilities that make it an excellent tool for guiding the development of DNA-made devices. The technique has been increasingly used in DNA nanotechnology, especially for the analysis of structure, dynamics, integrity, and operation of DNA-made devices; however, its capabilities are not yet sufficiently familiar to the community. The purpose of this Account is to demonstrate how different SMF tools can be utilized for the development of DNA devices and for structural dynamic investigation of biomolecules in general and DNA molecules in particular. Single-molecule diffusion-based Förster resonance energy transfer and alternating laser excitation (sm-FRET/ALEX) and immobilization-based total internal reflection fluorescence (TIRF) techniques are briefly described and demonstrated. To illustrate the many applications of SMF to DNA nanotechnology, examples of SMF studies of DNA hairpins and

Nanotechnology-based drug delivery systems

Directory of Open Access Journals (Sweden)

Singh Baljit

2007-12-01

Full Text Available Abstract Nanoparticles hold tremendous potential as an effective drug delivery system. In this review we discussed recent developments in nanotechnology for drug delivery. To overcome the problems of gene and drug delivery, nanotechnology has gained interest in recent years. Nanosystems with different compositions and biological properties have been extensively investigated for drug and gene delivery applications. To achieve efficient drug delivery it is important to understand the interactions of nanomaterials with the biological environment, targeting cell-surface receptors, drug release, multiple drug administration, stability of therapeutic agents and molecular mechanisms of cell signalling involved in pathobiology of the disease under consideration. Several anti-cancer drugs including paclitaxel, doxorubicin, 5-fluorouracil and dexamethasone have been successfully formulated using nanomaterials. Quantom dots, chitosan, Polylactic/glycolic acid (PLGA and PLGA-based nanoparticles have also been used for in vitro RNAi delivery. Brain cancer is one of the most difficult malignancies to detect and treat mainly because of the difficulty in getting imaging and therapeutic agents past the blood-brain barrier and into the brain. Anti-cancer drugs such as loperamide and doxorubicin bound to nanomaterials have been shown to cross the intact blood-brain barrier and released at therapeutic concentrations in the brain. The use of nanomaterials including peptide-based nanotubes to target the vascular endothelial growth factor (VEGF receptor and cell adhesion molecules like integrins, cadherins and selectins, is a new approach to control disease progression.

Nanoscience Nanotechnologies and Nanophysics

CERN Document Server

Dupas, Claire; Lahmani, Marcel

2007-01-01

Nanotechnologies and nanosciences are a fast-developing field of research, which sit at the point of convergence of several disciplines (physics, chemistry, biology, mechanics, etc.). This practically-oriented overview is designed to provide students and researchers with essential information on both the tools of manufacture and specific features of the nanometric scale, as well as applications within the most active fields (electronics, magnetism, information storage, biology). Specific applications and techniques covered include nanolithography, STM and AFM, nanowires and supramolecules, molecular electronics, optronics, and simulation. Each section of the book devotes considerable space to industrial applications and prospective developments. The carefully edited contributions are written by reserach workers and unirveisty instructors who are experts in their own fields and full up-to-date with the latest developments. Their uniform and self-contained nature permit users to access the most relevant chapter...

Reconstruction Algorithms in Undersampled AFM Imaging

DEFF Research Database (Denmark)

Arildsen, Thomas; Oxvig, Christian Schou; Pedersen, Patrick Steffen

2016-01-01

This paper provides a study of spatial undersampling in atomic force microscopy (AFM) imaging followed by different image reconstruction techniques based on sparse approximation as well as interpolation. The main reasons for using undersampling is that it reduces the path length and thereby...... the scanning time as well as the amount of interaction between the AFM probe and the specimen. It can easily be applied on conventional AFM hardware. Due to undersampling, it is then necessary to further process the acquired image in order to reconstruct an approximation of the image. Based on real AFM cell...... images, our simulations reveal that using a simple raster scanning pattern in combination with conventional image interpolation performs very well. Moreover, this combination enables a reduction by a factor 10 of the scanning time while retaining an average reconstruction quality around 36 dB PSNR...

Development of Taiwan's strategies for regulating nanotechnology-based pharmaceuticals harmonized with international considerations.

Science.gov (United States)

Guo, Jiun-Wen; Lee, Yu-Hsuan; Huang, Hsiau-Wen; Tzou, Mei-Chyun; Wang, Ying-Jan; Tsai, Jui-Chen

2014-01-01

Nanotechnology offers potential in pharmaceuticals and biomedical developments for improving drug delivery systems, medical imaging, diagnosis, cancer therapy, and regenerative medicine. Although there is no international regulation or legislation specifically for nanomedicine, it is agreed worldwide that considerably more attention should be paid to the quality, safety, and efficacy of nanotechnology-based drugs. The US Food and Drug Administration and the European Medicines Agency have provided several draft regulatory guidance and reflection papers to assist the development of nanomedicines. To cope with the impact of nanotechnology and to foster its pharmaceutical applications and development in Taiwan, this article reviews the trends of regulating nanotechnology-based pharmaceuticals in the international community and proposes strategies for Taiwan's regulation harmonized with international considerations. The draft regulatory measures include a chemistry, manufacturing, and controls (CMC) review checklist and guidance for CMC review of liposomal products. These have been submitted for discussion among an expert committee, with membership comprised of multidisciplinary academia, research institutions, the pharmaceutical industry, and regulators, and are currently approaching final consensus. Once a consensus is reached, these mechanisms will be recommended to the Taiwan Food and Drug Administration for jurisdiction and may be initiated as the starting point for regulating nanotechnology-based pharmaceuticals in Taiwan.

Regulatory roadmap for nanotechnology based medicines

OpenAIRE

Limaye, Vaidehi; Fortwengel, Gerhard; Limaye, Dnyanesh

2014-01-01

Nanotechnology is emerging as one of the key technologies of the 21st century and is expected to enable developments across a wide range of sectors that can benefit citizens. Nanomedicine is an application of nanotechnology in the areas of healthcare, disease diagnosis, treatment and prevention of disease. Nanomedicines pose problem of nanotoxicity related to factors like size, shape, specific surface area, surface morphology, and crystallinity. Currently, nanomedicines are regulate...

Nanotechnology applications in thoracic surgery.

Science.gov (United States)

Hofferberth, Sophie C; Grinstaff, Mark W; Colson, Yolonda L

2016-07-01

Nanotechnology is an emerging, rapidly evolving field with the potential to significantly impact care across the full spectrum of cancer therapy. Of note, several recent nanotechnological advances show particular promise to improve outcomes for thoracic surgical patients. A variety of nanotechnologies are described that offer possible solutions to existing challenges encountered in the detection, diagnosis and treatment of lung cancer. Nanotechnology-based imaging platforms have the ability to improve the surgical care of patients with thoracic malignancies through technological advances in intraoperative tumour localization, lymph node mapping and accuracy of tumour resection. Moreover, nanotechnology is poised to revolutionize adjuvant lung cancer therapy. Common chemotherapeutic drugs, such as paclitaxel, docetaxel and doxorubicin, are being formulated using various nanotechnologies to improve drug delivery, whereas nanoparticle (NP)-based imaging technologies can monitor the tumour microenvironment and facilitate molecularly targeted lung cancer therapy. Although early nanotechnology-based delivery systems show promise, the next frontier in lung cancer therapy is the development of 'theranostic' multifunctional NPs capable of integrating diagnosis, drug monitoring, tumour targeting and controlled drug release into various unifying platforms. This article provides an overview of key existing and emerging nanotechnology platforms that may find clinical application in thoracic surgery in the near future. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Nanotechnology: an evidence-based analysis.

Science.gov (United States)

2006-01-01

Due to continuing advances in the development of structures, devices, and systems with a length of about 1 to 100 nanometres (nm) (1 nm is one billionth of a metre), the Medical Advisory Secretariat conducted a horizon scanning appraisal of nanotechnologies as new and emerging technologies, including an assessment of the possibly disruptive impact of future nanotechnologies. The National Cancer Institute (NCI) in the United States proclaimed a 2015 challenge goal of eliminating suffering and death from cancer. To help meet this goal, the NCI is engaged in a concerted effort to introduce nanotechnology "to radically change the way we diagnose, treat and prevent cancer." It is the NCI's position that "melding nanotechnology and cancer research and development efforts will have a profound, disruptive effect on how we diagnose, treat, and prevent cancer." Thus, this appraisal sought to determine the systemic effects of nanotechnologies that target, image and deliver drugs, for example, with respect to health human resources, training, and new specialties; and to assess the current status of these nanotechnologies and their projected timeline to clinical utilization. TARGET POPULATION AND CONDITION Cancer is a heterogeneous set of many malignant diseases. In each sex, 3 sites account for over one-half of all cancers. In women, these are the breast (28%), colorectum (13%) and lungs (12%). In men, these are the prostate (28%), lungs (15%), and the colorectum (13%). It is estimated that 246,000 people in Ontario (2% of the population) have been diagnosed with cancer within the past 10 years and are still alive. Most were diagnosed with cancer of the breast (21%), prostate (20%), or colon or rectum (13%). The number of new cancer cases diagnosed each year in Ontario is expected to increase from about 53,000 in 2001 to 80,000 in 2015. This represents more than a 50% increase in new cases over this period. An aging population, population growth, and rising cancer risk are

[Nanotechnology, nanomedicine and nanopharmacology].

Science.gov (United States)

Fernández, Pedro Lorenzo

2007-01-01

Based on Nanotechnology methods, Nanomedicine and Nanotecnology will obtain significant advances in areas such as Diagnostic, Regenerative Medicine and pharmacological Therapeutics. With nanotechnology-based drug delivery systems,important improvement on pharmacokinetics of drugs will take place, due to increased solubility, protection against decrease in drug effects due to excessive metabolism and subsequent increase of bioavailability. Improvement on pharmacodynamic parameters will occur also due to increased drug concentration in target tissues. Also the use of Nanotechnology in the modern pharmacology will serve for a more accurate control of doses, which will decrease significantly drug toxicity.

Nanomaterial inhalation exposure from nanotechnology-based cosmetic powders: a quantitative assessment

International Nuclear Information System (INIS)

Nazarenko, Yevgen; Zhen Huajun; Han Taewon; Lioy, Paul J.; Mainelis, Gediminas

2012-01-01

In this study we quantified exposures to airborne particles ranging from 14 nm to 20 μm due to the use of nanotechnology-based cosmetic powders. Three nanotechnology-based and three regular cosmetic powders were realistically applied to a mannequin’s face while measuring the concentration and size distribution of inhaled aerosol particles. Using these data we calculated that the highest inhaled particle mass was in the coarse aerosol fraction (2.5–10 μm), while particles <100 nm made minimal contribution to the inhaled particle mass. For all powders, 85–93 % of aerosol deposition occurred in the head airways, while <10 % deposited in the alveolar and <5 % in the tracheobronchial regions. Electron microscopy data suggest that nanomaterials were likely distributed as agglomerates across the entire investigated aerosol size range (14 nm–20 μm). Thus, investigation of nanoparticle health effects should consider not only the alveolar region, but also other respiratory system regions where substantial nanomaterial deposition during the actual nanotechnology-based product use would occur.

Coating of AFM probes with aquatic humic and non-humic NOM to study their adhesion properties

KAUST Repository

Aubry, Cyril; Gutié rrez, Leonardo A.; Croue, Jean-Philippe

2013-01-01

-coated colloidal probes. AFM-generated force-distance curves were analyzed to elucidate the nature and mechanisms of these interacting forces. Electrostatics and steric interactions were important contributors to repulsive forces during approach, although

EDITORIAL: Nanotechnology at the interface of cell biology, materials science and medicine Nanotechnology at the interface of cell biology, materials science and medicine

Science.gov (United States)

Engel, Andreas; Miles, Mervyn

2008-09-01

The atomic force microscope (AFM) and related scanning probe microscopes have become resourceful tools to study cells, supramolecular assemblies and single biomolecules, because they allow investigations of such structures in native environments. Quantitative information has been gathered about the surface structure of membrane proteins to lateral and vertical resolutions of 0.5 nm and 0.1 nm, respectively, about the forces that keep protein-protein and protein-nucleic acid assemblies together as well as single proteins in their native conformation, and about the nanomechanical properties of cells in health and disease. Such progress has been achieved mainly because of constant development of AFM instrumentation and sample preparation methods. This special issue of Nanotechnology presents papers from leading laboratories in the field of nanobiology, covering a wide range of topics in the form of original and novel scientific contributions. It addresses achievements in instrumentation, sample preparation, automation and in biological applications. These papers document the creativity and persistence of researchers pursuing the goal to unravel the structure and dynamics of cells, supramolecuar structures and single biomolecules at work. Improved cantilever sensors, novel optical probes, and quantitative data on supports for electrochemical experiments open new avenues for characterizing biological nanomachines down to the single molecule. Comparative measurements of healthy and metastatic cells promise new methods for early detection of tumors, and possible assessments of drug efficacy. High-speed AFMs document possibilities to monitor crystal growth and to observe large structures at video rate. A wealth of information on amyloid-type fibers as well as on membrane proteins has been gathered by single molecule force spectroscopy—a technology now being automated for large-scale data collection. With the progress of basic research and a strong industry supporting

Nanotechnology: Fundamental Principles and Applications

Science.gov (United States)

Ranjit, Koodali T.; Klabunde, Kenneth J.

Nanotechnology research is based primarily on molecular manufacturing. Although several definitions have been widely used in the past to describe the field of nanotechnology, it is worthwhile to point out that the National Nanotechnology Initiative (NNI), a federal research and development scheme approved by the congress in 2001 defines nanotechnology only if the following three aspects are involved: (1) research and technology development at the atomic, molecular, or macromolecular levels, in the length scale of approximately 1-100 nanometer range, (2) creating and using structures, devices, and systems that have novel properties and functions because of their small and/or intermediate size, and (3) ability to control or manipulate on the atomic scale. Nanotechnology in essence is the technology based on the manipulation of individual atoms and molecules to build complex structures that have atomic specifications.

Nanotechnology for Cancer Therapy Based on Chemotherapy

OpenAIRE

Chen-Yang Zhao; Rui Cheng; Zhe Yang; Zhong-Min Tian

2018-01-01

Chemotherapy has been widely applied in clinics. However, the therapeutic potential of chemotherapy against cancer is seriously dissatisfactory due to the nonspecific drug distribution, multidrug resistance (MDR) and the heterogeneity of cancer. Therefore, combinational therapy based on chemotherapy mediated by nanotechnology, has been the trend in clinical research at present, which can result in a remarkably increased therapeutic efficiency with few side effects to normal tissues. Moreover,...

The effect of activity-based nanoscience and nanotechnology education on pre-service science teachers' conceptual understanding

Science.gov (United States)

Şenel Zor, Tuba; Aslan, Oktay

2018-03-01

The purpose of the study was to examine the effect of activity-based nanoscience and nanotechnology education (ABNNE) on pre-service science teachers' (PST') conceptual understanding of nanoscience and nanotechnology. Within this context, the study was conducted according to mixed methods research with the use of both quantitative and qualitative methods. The participants were 32 PST who were determined by using criterion sampling that is one of the purposive sampling methods. ABNNE was carried out during 7 weeks as 2 h per week in special issues at physics course. Design and implementation of ABNNE were based on "Big Ideas" which was found in literature and provided guidance for teaching nanoscience and nanotechnology. All activities implemented during ABNNE were selected from literature. "Nanoscience and Nanotechnology Concept Test (NN-CT)" and "Activity-Based Nanoscience and Nanotechnology Education Assessment Form (ABNNE-AF)" were used as data collection tools in research. Findings obtained with data collection tools were discussed with coverage of literature. The findings revealed that PST conceptual understanding developed following ABNNE. Various suggestions for increasing PST conceptual understanding of nanoscience and nanotechnology were presented according to the results of the study.

Advancing cellulose-based nanotechnology

Science.gov (United States)

Theodore H. Wegner; Philip E. Jones

2006-01-01

Nanotechnology has applications across most economic sectors and allows the development of new enabling science with broad commercial potential. Cellulose and lignocellulose have great potential as nanomaterials because they are abundant, renewable, have a nanofibrillar structure, can be made multifunctional, and self-assemble into well-defined architectures. To...

A low-cost AFM setup with an interferometer for undergraduates and secondary-school students

International Nuclear Information System (INIS)

Bergmann, Antje; Feigl, Daniela; Kuhn, David; Schaupp, Manuel; Quast, Günter; Busch, Kurt; Eichner, Ludwig; Schumacher, Jens

2013-01-01

Atomic force microscopy (AFM) is an important tool in nanotechnology. This method makes it possible to observe nanoscopic surfaces beyond the resolution of light microscopy. In order to provide undergraduate and secondary-school students with insights into this world, we have developed a very robust low-cost AFM setup with a Fabry–Perot interferometer as a detecting device. This setup is designed to be operated almost completely manually and its simplicity gives access to a profound understanding of the working principle. Our AFM is operated in a constant height mode, i.e. the topography of the sample surface is represented directly by the deflection of the cantilever. Thus, the measuring procedure can be understood even by secondary-school students; furthermore, it is the method with the lowest cost, totalling not more than 10–15 k Euros. Nevertheless, we are able to examine a large variety of sample topographies such as CD and DVD surfaces, IC structures, blood cells, butterfly wings or moth eyes. Furthermore, force–distance curves can be recorded and the tensile moduli of some materials can be evaluated. We present our setup in detail and describe its working principles. In addition, we show various experiments which have already been performed by students. (paper)

Update on Nanotechnology-based Drug Delivery Systems in Cancer Treatment.

Science.gov (United States)

Ho, Benjamin N; Pfeffer, Claire M; Singh, Amareshwar T K

2017-11-01

The emerging field of nanotechnology meets the demands for innovative approaches in the diagnosis and treatment of cancer. The nanoparticles are biocompatible and biodegradable and are made of a core, a particle that acts as a carrier, and one or more functional groups on the core which target specific sites. Nanotech in drug delivery includes nanodisks, High Density Lipoprotein nanostructures, liposomes, and gold nanoparticles. The fundamental advantages of nanoparticles are: improved delivery of water-insoluble drugs, targeted delivery, co-delivery of two or more drugs for combination therapy, and visualization of the drug delivery site by combining imaging system and a therapeutic drug. One of the potential applications of nanotechnology is in the treatment of cancer. Conventional methods for cancer treatments have included chemotherapy, surgery, or radiation. Early recognition and treatment of cancer with these approaches is still challenging. Innovative technologies are needed to overcome multidrug resistance, and increase drug localization and efficacy. Application of nanotechnology to cancer biology has brought in a new hope for developing treatment strategies on cancer. In this study, we present a review on the recent advances in nanotechnology-based approaches in cancer treatment. Copyright© 2017, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Factors influencing nanotechnology commercialization: an empirical analysis of nanotechnology firms in South Korea

Science.gov (United States)

Lee, Cheol-Ju; Lee, SuKap; Jhon, Myung S.; Shin, Juneseuk

2013-02-01

Nanotechnology is a representative emerging technology in an embryonic stage. Due to the continuous support provided by both the public and private sectors of many countries, nanotechnologies have increasingly been commercialized in a wide array of industries, but also produce many commercialization failures. Tackling this problem, we investigate key factors affecting the commercialization of nanotechnologies. Identifying key factors of nanotechnology commercialization through literature review and interview with CEOs, we collected data of 206 Korean nanotechnology-based companies, and analyzed the causal relationship between key factors and financial performance. Logistic and Tobit regression models are used. Overall, companies achieving successful commercialization hold some common characteristics including consistent exploratory R&D, governmental funding, and nano-instrument/energy/environment-related products. Also, the use of potentially toxic materials makes commercialization difficult even if the products are not toxic.

Overview of Nanotechnology in Road Engineering

OpenAIRE

Arpit Singh; Dr. Sangita; Arpan Singh

2015-01-01

Nanotechnology has changed our vision, expectations, and abilities to control the material world. This paper examines and document applicable nanotechnology based product that can be improve the overall competitiveness of the Road engineering industry. In this review, nanotechnology is applying in road sector.

Factors influencing nanotechnology commercialization: an empirical analysis of nanotechnology firms in South Korea

International Nuclear Information System (INIS)

Lee, Cheol-Ju; Lee, SuKap; Jhon, Myung S.; Shin, Juneseuk

2013-01-01

Nanotechnology is a representative emerging technology in an embryonic stage. Due to the continuous support provided by both the public and private sectors of many countries, nanotechnologies have increasingly been commercialized in a wide array of industries, but also produce many commercialization failures. Tackling this problem, we investigate key factors affecting the commercialization of nanotechnologies. Identifying key factors of nanotechnology commercialization through literature review and interview with CEOs, we collected data of 206 Korean nanotechnology-based companies, and analyzed the causal relationship between key factors and financial performance. Logistic and Tobit regression models are used. Overall, companies achieving successful commercialization hold some common characteristics including consistent exploratory R and D, governmental funding, and nano-instrument/energy/environment-related products. Also, the use of potentially toxic materials makes commercialization difficult even if the products are not toxic.

Factors influencing nanotechnology commercialization: an empirical analysis of nanotechnology firms in South Korea

Energy Technology Data Exchange (ETDEWEB)

Lee, Cheol-Ju [SME Innovation Center, KEIT (Korea Evaluation Institute of Industrial Technology) (Korea, Republic of); Lee, SuKap [Nano and Convergence PD Team, KEIT, Korea Technology Center (Korea, Republic of); Jhon, Myung S. [Sungkyunkwan University, School of Advanced Materials Science and Engineering (Korea, Republic of); Shin, Juneseuk, E-mail: jsshin@skku.edu [Sungkyunkwan University, Department of Systems Management Engineering and Graduate School of Management of Technology (MOT) (Korea, Republic of)

2013-02-15

Nanotechnology is a representative emerging technology in an embryonic stage. Due to the continuous support provided by both the public and private sectors of many countries, nanotechnologies have increasingly been commercialized in a wide array of industries, but also produce many commercialization failures. Tackling this problem, we investigate key factors affecting the commercialization of nanotechnologies. Identifying key factors of nanotechnology commercialization through literature review and interview with CEOs, we collected data of 206 Korean nanotechnology-based companies, and analyzed the causal relationship between key factors and financial performance. Logistic and Tobit regression models are used. Overall, companies achieving successful commercialization hold some common characteristics including consistent exploratory R and D, governmental funding, and nano-instrument/energy/environment-related products. Also, the use of potentially toxic materials makes commercialization difficult even if the products are not toxic.

Nanotechnology-Based Drug Delivery Systems for Photodynamic Therapy of Cancer: A Review.

Science.gov (United States)

Calixto, Giovana Maria Fioramonti; Bernegossi, Jéssica; de Freitas, Laura Marise; Fontana, Carla Raquel; Chorilli, Marlus

2016-03-11

Photodynamic therapy (PDT) is a promising alternative approach for improved cancer treatment. In PDT, a photosensitizer (PS) is administered that can be activated by light of a specific wavelength, which causes selective damage to the tumor and its surrounding vasculature. The success of PDT is limited by the difficulty in administering photosensitizers (PSs) with low water solubility, which compromises the clinical use of several molecules. Incorporation of PSs in nanostructured drug delivery systems, such as polymeric nanoparticles (PNPs), solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), gold nanoparticles (AuNPs), hydrogels, liposomes, liquid crystals, dendrimers, and cyclodextrin is a potential strategy to overcome this difficulty. Additionally, nanotechnology-based drug delivery systems may improve the transcytosis of a PS across epithelial and endothelial barriers and afford the simultaneous co-delivery of two or more drugs. Based on this, the application of nanotechnology in medicine may offer numerous exciting possibilities in cancer treatment and improve the efficacy of available therapeutics. Therefore, the aim of this paper is to review nanotechnology-based drug delivery systems for photodynamic therapy of cancer.

Nanotechnology-Based Drug Delivery Systems for Photodynamic Therapy of Cancer: A Review

Directory of Open Access Journals (Sweden)

Giovana Maria Fioramonti Calixto

2016-03-01

Full Text Available Photodynamic therapy (PDT is a promising alternative approach for improved cancer treatment. In PDT, a photosensitizer (PS is administered that can be activated by light of a specific wavelength, which causes selective damage to the tumor and its surrounding vasculature. The success of PDT is limited by the difficulty in administering photosensitizers (PSs with low water solubility, which compromises the clinical use of several molecules. Incorporation of PSs in nanostructured drug delivery systems, such as polymeric nanoparticles (PNPs, solid lipid nanoparticles (SLNs, nanostructured lipid carriers (NLCs, gold nanoparticles (AuNPs, hydrogels, liposomes, liquid crystals, dendrimers, and cyclodextrin is a potential strategy to overcome this difficulty. Additionally, nanotechnology-based drug delivery systems may improve the transcytosis of a PS across epithelial and endothelial barriers and afford the simultaneous co-delivery of two or more drugs. Based on this, the application of nanotechnology in medicine may offer numerous exciting possibilities in cancer treatment and improve the efficacy of available therapeutics. Therefore, the aim of this paper is to review nanotechnology-based drug delivery systems for photodynamic therapy of cancer.

The AFm phase in Portland cement

International Nuclear Information System (INIS)

Matschei, T.; Lothenbach, B.; Glasser, F.P.

2007-01-01

The AFm phase of Portland cements refers to a family of hydrated calcium aluminates based on the hydrocalumite-like structure of 4CaO.Al 2 O 3 .13-19 H 2 O. However OH - may be replaced by SO 4 2- and CO 3 2- . Except for limited replacement (50 mol%, maximum) of sulfate by hydroxide, these compositions do not form solid solutions and, from the mineralogical standpoint, behave as separate phases. Therefore many hydrated cements will contain mixtures of AFm phases. AFm phases have been made from precursors and experimentally-determined phase relationships are depicted at 25 deg. C. Solubility data are reported and thermodynamic data are derived. The 25 deg. C stability of AFm phases is much affected by the nature of the anion: carbonate stabilises AFm and displaces OH and SO 4 at species activities commonly encountered in cement systems. However in the presence of portlandite, and as carbonate displaces sulfate in AFm, the reaction results in changes in the amount of both portlandite and ettringite: specimen calculations are presented to quantify these changes. The scheme of phase balances enables calculation of the mineralogical balances of a hydrated cement paste with greater accuracy than hitherto practicable

Visual framing of nanotechnology in newspapers

DEFF Research Database (Denmark)

Nielsen, Kristian Hvidtfelt

discourse, very little research into to the visual communication of science in public has been carried out. Nanotechnology is an emerging scientific discipline that just recently has entered the public sphere. Surveys show that most Europeans and most Americans have very little knowledge about...... nanotechnology. Even so, there is a marked difference between Europeans who generally are cautious, it not skeptical about nanotechnology, and American who seem to have a much more positive attitude towards nanotechnology. Objective This paper surveys visual images used to communicate nanotechnology (and...... nanotechnology-related issues) in the printed press in Denmark from 1993 to 2006. Based on a representative sample of newspaper articles referring to nanotechnology, the survey categorizes and analyzes the images used. Studies have shown that to a high degree newspaper readers use images to navigate...

Developing nanotechnology in Latin America

International Nuclear Information System (INIS)

Kay, Luciano; Shapira, Philip

2009-01-01

This article investigates the development of nanotechnology in Latin America with a particular focus on Argentina, Brazil, Chile, and Uruguay. Based on data for nanotechnology research publications and patents and suggesting a framework for analyzing the development of R and D networks, we identify three potential strategies of nanotechnology research collaboration. Then, we seek to identify the balance of emphasis upon each of the three strategies by mapping the current research profile of those four countries. In general, we find that they are implementing policies and programs to develop nanotechnologies but differ in their collaboration strategies, institutional involvement, and level of development. On the other hand, we find that they coincide in having a modest industry participation in research and a low level of commercialization of nanotechnologies.

[Nanotechnology future of medicine].

Science.gov (United States)

Terlega, Katarzyna; Latocha, Małgorzata

2012-10-01

Nanotechnology enables to produce products with new, exactly specified, unique properties. Those products are finding application in various branches of electronic, chemical, food and textile industry as well as in medicine, pharmacy, agriculture, architectural engineering, aviation and in defense. In this paper structures used in nanomedicine were characterized. Possibilities and first effort of application of nanotechnology in diagnostics and therapy were also described. Nanotechnology provides tools which allow to identifying changes and taking repair operations on cellular and molecular level and applying therapy oriented for specific structures in cell. Great hope are being associated with entering nanotechnology into the regenerative medicine. It requires astute recognition bases of tissue regeneration biology--initiating signals as well as the intricate control system of the progress of this process. However application of nanotechnology in tissue engineering allows to avoiding problems associated with loss properties of implants what is frequent cause of performing another surgical procedure at present.

Nanotechnology in respiratory medicine.

Science.gov (United States)

Omlor, Albert Joachim; Nguyen, Juliane; Bals, Robert; Dinh, Quoc Thai

2015-05-29

Like two sides of the same coin, nanotechnology can be both boon and bane for respiratory medicine. Nanomaterials open new ways in diagnostics and treatment of lung diseases. Nanoparticle based drug delivery systems can help against diseases such as lung cancer, tuberculosis, and pulmonary fibrosis. Moreover, nanoparticles can be loaded with DNA and act as vectors for gene therapy in diseases like cystic fibrosis. Even lung diagnostics with computer tomography (CT) or magnetic resonance imaging (MRI) profits from new nanoparticle based contrast agents. However, the risks of nanotechnology also have to be taken into consideration as engineered nanomaterials resemble natural fine dusts and fibers, which are known to be harmful for the respiratory system in many cases. Recent studies have shown that nanoparticles in the respiratory tract can influence the immune system, can create oxidative stress and even cause genotoxicity. Another important aspect to assess the safety of nanotechnology based products is the absorption of nanoparticles. It was demonstrated that the amount of pulmonary nanoparticle uptake not only depends on physical and chemical nanoparticle characteristics but also on the health status of the organism. The huge diversity in nanotechnology could revolutionize medicine but makes safety assessment a challenging task.

A framing theory-based content analysis of a Turkish newspaper's coverage of nanotechnology

Science.gov (United States)

Şenocak, Erdal

2017-07-01

This study aims at examining how nanotechnology is covered in Turkish print media. As an initial part of this objective, a total of 76 articles derived from a widespread national newspaper were analyzed based on the framing theory. These articles were analyzed using both quantitative and qualitative traditions of content analysis; however, the quantitative method was the primary form of investigation. The analyses showed that the first news about nanotechnology appeared in 1991 and the frequencies of articles had increased in the subsequent years; but the number of articles had decreased after a while. The findings demonstrated a remarkable positive tone in the articles; there were only a few articles in negative tones and these articles were published in the first years of nanotechnology news. It was further found that the articles were mostly concerned with the implementations of nanotechnology, such as research and education centers, medical, and electronics. The study also investigated the presentation style of nanotechnology news. In other words, it investigated how the articles were framed. The results showed that the articles were mostly framed with scientific researches or discoveries and future expectations.

Nanotechnology Innovations

Science.gov (United States)

Malroy, Eric

2010-01-01

Nanotechnology is rapidly affecting all engineering disciplines as new products and applications are being found and brought to market. This session will present an overview of nanotechnology and let you learn about the advances in the field and how it could impact you. Some of the areas touched upon will be nanomaterials with their multifunctional capabilities, nanotechnology impact on energy systems, nanobiotechnology including nanomedicine, and nanotechnology relevant to space systems with a focus on ECLSS. Also, some important advances related to thermal systems will be presented as well as future predictions on nanotechnology.

Comparison of different aminofunctionalization strategies for attachment of single antibodies to AFM cantilevers

Energy Technology Data Exchange (ETDEWEB)

Ebner, Andreas [Institute of Biophysics, University of Linz, 4040 Linz (Austria)], E-mail: andreas.ebner@jku.at; Hinterdorfer, Peter; Gruber, Hermann J. [Institute of Biophysics, University of Linz, 4040 Linz (Austria)

2007-10-15

Atomic force microscopy (AFM) has developed into a key technique for elucidation of biological systems on the single molecular level. In particular, molecular recognition force microscopy has proven to be a powerful tool for the investigation of biological interactions under near physiological conditions. For this purpose, ligands are tethered to AFM tips and the interaction forces with cognate receptors on the sample surface are measured with pico-Newton accuracy. In the first step of tip functionalization, amino groups are typically introduced on the initially inert AFM tip. Several methods have been developed to reproducibly adjust the desired low density of amino groups on the tip surface, i.e. esterification with ethanolamine, gas-phase silanization with aminopropyl-triethoxysilane (APTES), or treatment with aminophenyl-trimethoxysilane (APhS) in toluene solution. In the present study, the usefulness of these methods for attachments of antibodies to AFM tips was characterized by a standardized test system, in which biotinylated IgG was bound to the tip and a dense monolayer of avidin on mica served as test sample. All three methods of aminofunctionalization were found fully satisfactory for attachment of single antibodies to AFM tips, only in a parallel macroscopic assay on silicon nitride chips a minor difference was found in that APTES appeared to yield a slightly lower surface density of amino groups.

Synthesis and AFM visualization of DNA nanostructures

International Nuclear Information System (INIS)

Mizuno, Rika; Haruta, Hirotaka; Morii, Takashi; Okada, Takao; Asakawa, Takeshi; Hayashi, Kenshi

2004-01-01

We propose a novel bottom-up approach for the fabrication of various desired nanostructures, based on self-assembly of oligonucleotides governed by Watson-Crick base pairing. Using this approach, we designed Y-shaped, closed Y-shaped, H-shaped, and hexagonal structures with oligonucleotides. These structures were autonomously fabricated simply by mixing equimolar solutions of oligonucleotides and performing hybridization. After synthesis of the nanostructures, we confirmed their validity by agarose gel electrophoresis and atomic force microscope (AFM) visualization. We detected bands of the desired molecular sizes in the gel electrophoresis and observed the desired structures by AFM analysis. We concluded that the synthesized structures were consistent with our intended design and that AFM visualization is a very useful tool for the observation of nanostructures

Wondrous nanotechnology

International Nuclear Information System (INIS)

Awan, I.Z.; Hussain, S.B.

2016-01-01

In the last two decades, a lot of progress has been made in Nanotechnology and Nanoscience, an exploitation of matter on atomic, molecular and supermolecular scale. Nanotechnology because of its size is widely used in such varied fields as surface science, molecular biology, organic chemistry, semi-conductor physics, micro fabrication, medical sciences, electronics, biomaterials, energy production, etc. Using nanotechnology, Researchers have been able to develop new materials with nanoscale dimensions to directly control matter on the atomic or molecular scale. Due to the range of many potential applications, both industrial and military, many governments boast invested billions of dollars in nanotechnology and nanoscience research. This brief review deals with the fundamentals of nanotechnology and nanoscience and its application in various fields. It also discusses the future of nanotechnology and the risks involved in it. (author)

Refining search terms for nanotechnology

International Nuclear Information System (INIS)

Porter, Alan L.; Youtie, Jan; Shapira, Philip; Schoeneck, David J.

2008-01-01

The ability to delineate the boundaries of an emerging technology is central to obtaining an understanding of the technology's research paths and commercialization prospects. Nowhere is this more relevant than in the case of nanotechnology (hereafter identified as 'nano') given its current rapid growth and multidisciplinary nature. (Under the rubric of nanotechnology, we also include nanoscience and nanoengineering.) Past efforts have utilized several strategies, including simple term search for the prefix nano, complex lexical and citation-based approaches, and bootstrapping techniques. This research introduces a modularized Boolean approach to defining nanotechnology which has been applied to several research and patenting databases. We explain our approach to downloading and cleaning data, and report initial results. Comparisons of this approach with other nanotechnology search formulations are presented. Implications for search strategy development and profiling of the nanotechnology field are discussed

Refining search terms for nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Porter, Alan L. [Georgia Institute of Technology (United States); Youtie, Jan [Georgia Institute of Technology, Enterprise Innovation Institute (United States)], E-mail: jan.youtie@innovate.gatech.edu; Shapira, Philip [Georgia Institute of Technology (United States); Schoeneck, David J. [Search Technology, Inc. (United States)

2008-05-15

The ability to delineate the boundaries of an emerging technology is central to obtaining an understanding of the technology's research paths and commercialization prospects. Nowhere is this more relevant than in the case of nanotechnology (hereafter identified as 'nano') given its current rapid growth and multidisciplinary nature. (Under the rubric of nanotechnology, we also include nanoscience and nanoengineering.) Past efforts have utilized several strategies, including simple term search for the prefix nano, complex lexical and citation-based approaches, and bootstrapping techniques. This research introduces a modularized Boolean approach to defining nanotechnology which has been applied to several research and patenting databases. We explain our approach to downloading and cleaning data, and report initial results. Comparisons of this approach with other nanotechnology search formulations are presented. Implications for search strategy development and profiling of the nanotechnology field are discussed.

Nanotechnology-based combinational drug delivery: an emerging approach for cancer therapy.

Science.gov (United States)

Parhi, Priyambada; Mohanty, Chandana; Sahoo, Sanjeeb Kumar

2012-09-01

Combination therapy for the treatment of cancer is becoming more popular because it generates synergistic anticancer effects, reduces individual drug-related toxicity and suppresses multi-drug resistance through different mechanisms of action. In recent years, nanotechnology-based combination drug delivery to tumor tissues has emerged as an effective strategy by overcoming many biological, biophysical and biomedical barriers that the body stages against successful delivery of anticancer drugs. The sustained, controlled and targeted delivery of chemotherapeutic drugs in a combination approach enhanced therapeutic anticancer effects with reduced drug-associated side effects. In this article, we have reviewed the scope of various nanotechnology-based combination drug delivery approaches and also summarized the current perspective and challenges facing the successful treatment of cancer. Copyright © 2012 Elsevier Ltd. All rights reserved.

Measuring protein isoelectric points by AFM-based force spectroscopy using trace amounts of sample

Science.gov (United States)

Guo, Shifeng; Zhu, Xiaoying; Jańczewski, Dominik; Lee, Serina Siew Chen; He, Tao; Teo, Serena Lay Ming; Vancso, G. Julius

2016-09-01

Protein charge at various pH and isoelectric point (pI) values is important in understanding protein function. However, often only trace amounts of unknown proteins are available and pI measurements cannot be obtained using conventional methods. Here, we show a method based on the atomic force microscope (AFM) to determine pI using minute quantities of proteins. The protein of interest is immobilized on AFM colloidal probes and the adhesion force of the protein is measured against a positively and a negatively charged substrate made by layer-by-layer deposition of polyelectrolytes. From the AFM force-distance curves, pI values with an estimated accuracy of ±0.25 were obtained for bovine serum albumin, myoglobin, fibrinogen and ribonuclease A over a range of 4.7-9.8. Using this method, we show that the pI of the ‘footprint’ of the temporary adhesive proteins secreted by the barnacle cyprid larvae of Amphibalanus amphitrite is in the range 9.6-9.7.

RNA and RNP as Building Blocks for Nanotechnology and Synthetic Biology.

Science.gov (United States)

Ohno, Hirohisa; Saito, Hirohide

2016-01-01

Recent technologies that aimed to elucidate cellular function have revealed essential roles for RNA molecules in living systems. Our knowledge concerning functional and structural information of naturally occurring RNA and RNA-protein (RNP) complexes is increasing rapidly. RNA and RNP interaction motifs are structural units that function as building blocks to constitute variety of complex structures. RNA-central synthetic biology and nanotechnology are constructive approaches that employ the accumulated information and build synthetic RNA (RNP)-based circuits and nanostructures. Here, we describe how to design and construct synthetic RNA (RNP)-based devices and structures at the nanometer-scale for biological and future therapeutic applications. RNA/RNP nanostructures can also be utilized as the molecular scaffold to control the localization or interactions of target molecule(s). Moreover, RNA motifs recognized by RNA-binding proteins can be applied to make protein-responsive translational "switches" that can turn gene expression "on" or "off" depending on the intracellular environment. This "synthetic RNA and RNP world" will expand tools for nanotechnology and synthetic biology. In addition, these reconstructive approaches would lead to a greater understanding of building principle in naturally occurring RNA/RNP molecules and systems. Copyright © 2016 Elsevier Inc. All rights reserved.

Nanotechnology and glaucoma: a review of the potential implications of glaucoma nanomedicine.

Science.gov (United States)

Kim, Nathaniel J; Harris, Alon; Gerber, Austin; Tobe, Leslie Abrams; Amireskandari, Annahita; Huck, Andrew; Siesky, Brent

2014-04-01

The purpose of this review is to discuss the evolution of nanotechnology and its potential diagnostic and therapeutic applications in the field of ophthalmology, particularly as it pertains to glaucoma. We reviewed literature using MEDLINE and PubMed databases with the following search terms: glaucoma, nanotechnology, nanomedicine, nanoparticles, ophthalmology and liposomes. We also reviewed pertinent references from articles found in this search. A brief history of nanotechnology and nanomedicine will be covered, followed by a discussion of the advantages and concerns of using this technology in the field of glaucoma. We will look at various studies concerning the development of nanomedicine, its potential applications in ocular drug delivery, diagnostic and imaging modalities and, surgical techniques. In particular, the challenges of assuring safety and efficacy of nanomedicine will be examined. We conclude that nanotechnology offers a novel approach to expanding diagnostic, imaging and surgical modalities in glaucoma and may contribute to the knowledge of disease pathogenesis at a molecular level. However, more research is needed to better elucidate the mechanism of cellular entry, the potential for nanoparticle cytotoxicity and the assurance of clinical efficacy.

Development of Taiwan’s strategies for regulating nanotechnology-based pharmaceuticals harmonized with international considerations

Directory of Open Access Journals (Sweden)

Guo JW

2014-10-01

Full Text Available Jiun-Wen Guo,1 Yu-Hsuan Lee,2 Hsiau-Wen Huang,3 Mei-Chyun Tzou,3 Ying-Jan Wang,2 Jui-Chen Tsai1,4 1Institute of Clinical Pharmacy and Pharmaceutical Sciences, College of Medicine, National Chung Kung University, Tainan, Taiwan; 2Department of Environmental and Occupational Health, College of Medicine, National Cheng Kung University, Tainan, Taiwan; 3Food and Drug Administration, Ministry of Health and Welfare, Taiwan; 4Center for Pharmaceutical Regulatory Science, National Cheng Kung University, Tainan, Taiwan Abstract: Nanotechnology offers potential in pharmaceuticals and biomedical developments for improving drug delivery systems, medical imaging, diagnosis, cancer therapy, and regenerative medicine. Although there is no international regulation or legislation specifically for nanomedicine, it is agreed worldwide that considerably more attention should be paid to the quality, safety, and efficacy of nanotechnology-based drugs. The US Food and Drug Administration and the European Medicines Agency have provided several draft regulatory guidance and reflection papers to assist the development of nanomedicines. To cope with the impact of nanotechnology and to foster its pharmaceutical applications and development in Taiwan, this article reviews the trends of regulating nanotechnology-based pharmaceuticals in the international community and proposes strategies for Taiwan’s regulation harmonized with international considerations. The draft regulatory measures include a chemistry, manufacturing, and controls (CMC review checklist and guidance for CMC review of liposomal products. These have been submitted for discussion among an expert committee, with membership comprised of multidisciplinary academia, research institutions, the pharmaceutical industry, and regulators, and are currently approaching final consensus. Once a consensus is reached, these mechanisms will be recommended to the Taiwan Food and Drug Administration for jurisdiction and may

Nanotechnology in Mexico: Key Findings Based on OECD Criteria

Science.gov (United States)

Foladori, Guillermo; Arteaga Figueroa, Edgar; Záyago Lau, Edgar; Appelbaum, Richard; Robles-Belmont, Eduardo; Villa, Liliana; Parker, Rachel; Leos, Vanessa

2015-01-01

This analysis of Mexico's nanotechnology policies utilizes indicators developed by the Organization for Economic Co-operation and Development, which in 2008 conducted a pilot survey comparing the nanotechnology policies of 24 countries. In this paper, we apply the same questionnaire to the Mexican case, adding business information derived from the…

Strategy for selecting nanotechnology carriers to overcome immunological and hematological toxicities challenging clinical translation of nucleic acid-based therapeutics.

Science.gov (United States)

Dobrovolskaia, Marina A; McNeil, Scott E

2015-07-01

Clinical translation of nucleic acid-based therapeutics (NATs) is hampered by assorted challenges in immunotoxicity, hematotoxicity, pharmacokinetics, toxicology and formulation. Nanotechnology-based platforms are being considered to help address some of these challenges due to the nanoparticles' ability to change drug biodistribution, stability, circulation half-life, route of administration and dosage. Addressing toxicology and pharmacology concerns by various means including NATs reformulation using nanotechnology-based carriers has been reviewed before. However, little attention was given to the immunological and hematological issues associated with nanotechnology reformulation. This review focuses on application of nanotechnology carriers for delivery of various types of NATs, and how reformulation using nanoparticles affects immunological and hematological toxicities of this promising class of therapeutic agents. NATs share several immunological and hematological toxicities with common nanotechnology carriers. In order to avoid synergy or exaggeration of undesirable immunological and hematological effects of NATs by a nanocarrier, it is critical to consider the immunological compatibility of the nanotechnology platform and its components. Since receptors sensing nucleic acids are located essentially in all cellular compartments, a strategy for developing a nanoformulation with reduced immunotoxicity should first focus on precise delivery to the target site/cells and then on optimizing intracellular distribution.

High accuracy FIONA-AFM hybrid imaging

International Nuclear Information System (INIS)

Fronczek, D.N.; Quammen, C.; Wang, H.; Kisker, C.; Superfine, R.; Taylor, R.; Erie, D.A.; Tessmer, I.

2011-01-01

Multi-protein complexes are ubiquitous and play essential roles in many biological mechanisms. Single molecule imaging techniques such as electron microscopy (EM) and atomic force microscopy (AFM) are powerful methods for characterizing the structural properties of multi-protein and multi-protein-DNA complexes. However, a significant limitation to these techniques is the ability to distinguish different proteins from one another. Here, we combine high resolution fluorescence microscopy and AFM (FIONA-AFM) to allow the identification of different proteins in such complexes. Using quantum dots as fiducial markers in addition to fluorescently labeled proteins, we are able to align fluorescence and AFM information to ≥8 nm accuracy. This accuracy is sufficient to identify individual fluorescently labeled proteins in most multi-protein complexes. We investigate the limitations of localization precision and accuracy in fluorescence and AFM images separately and their effects on the overall registration accuracy of FIONA-AFM hybrid images. This combination of the two orthogonal techniques (FIONA and AFM) opens a wide spectrum of possible applications to the study of protein interactions, because AFM can yield high resolution (5-10 nm) information about the conformational properties of multi-protein complexes and the fluorescence can indicate spatial relationships of the proteins in the complexes. -- Research highlights: → Integration of fluorescent signals in AFM topography with high (<10 nm) accuracy. → Investigation of limitations and quantitative analysis of fluorescence-AFM image registration using quantum dots. → Fluorescence center tracking and display as localization probability distributions in AFM topography (FIONA-AFM). → Application of FIONA-AFM to a biological sample containing damaged DNA and the DNA repair proteins UvrA and UvrB conjugated to quantum dots.

Nanotechnology and vaccine development

Directory of Open Access Journals (Sweden)

Mi-Gyeong Kim

2014-10-01

Full Text Available Despite the progress of conventional vaccines, improvements are clearly required due to concerns about the weak immunogenicity of these vaccines, intrinsic instability in vivo, toxicity, and the need for multiple administrations. To overcome such problems, nanotechnology platforms have recently been incorporated into vaccine development. Nanocarrier-based delivery systems offer an opportunity to enhance the humoral and cellular immune responses. This advantage is attributable to the nanoscale particle size, which facilitates uptake by phagocytic cells, the gut-associated lymphoid tissue, and the mucosa-associated lymphoid tissue, leading to efficient antigen recognition and presentation. Modifying the surfaces of nanocarriers with a variety of targeting moieties permits the delivery of antigens to specific cell surface receptors, thereby stimulating specific and selective immune responses. In this review, we introduce recent advances in nanocarrier-based vaccine delivery systems, with a focus on the types of carriers, including liposomes, emulsions, polymer-based particles, and carbon-based nanomaterials. We describe the remaining challenges and possible breakthroughs, including the development of needle-free nanotechnologies and a fundamental understanding of the in vivo behavior and stability of the nanocarriers in nanotechnology-based delivery systems.

Applications of carbon nanotubes-based biomaterials in biomedical nanotechnology.

Science.gov (United States)

Polizu, Stefania; Savadogo, Oumarou; Poulin, Philippe; Yahia, L'Hocine

2006-07-01

One of the facets of nanotechnology applications is the immense opportunities they offer for new developments in medicine and health sciences. Carbon nanotubes (CNTs) have particularly attracted attention for designing new monitoring systems for environment and living cells as well as nanosensors. Carbon nanotubes-based biomaterials are also employed as support for active prosthesis or functional matrices in reparation of parts of the human body. These nanostructures are studied as molecular-level building blocks for the complex and miniaturized medical device, and substrate for stimulation of cellular growth. The CNTs are cylindrical shaped with caged molecules which can act as nanoscale containers for molecular species, well required for biomolecular recognition and drug delivery systems. Endowed with very large aspect ratios, an excellent electrical conductivity and inertness along with mechanical robustness, nanotubes found enormous applications in molecular electronics and bioelectronics. The ballistic electrical behaviour of SWNTs conjugated with functionalization promotes a large variety of biosensors for individual molecules. Actuative response of CNTs is considered very promising feature for nanodevices, micro-robots and artificial muscles. An description of CNTs based biomaterials is attempted in this review, in order to point out their enormous potential for biomedical nanotechnology and nanobiotechnology.

Optical Beam Deflection Based AFM with Integrated Hardware and Software Platform for an Undergraduate Engineering Laboratory

Directory of Open Access Journals (Sweden)

Siu Hong Loh

2017-02-01

Full Text Available Atomic force microscopy (AFM has been used extensively in nanoscience research since its invention. Recently, many teaching laboratories in colleges, undergraduate institutions, and even high schools incorporate AFM as an effective teaching tool for nanoscience education. This paper presents an optical beam deflection (OBD based atomic force microscope, designed specifically for the undergraduate engineering laboratory as a teaching instrument. An electronic module for signal conditioning was built with components that are commonly available in an undergraduate electronic laboratory. In addition to off-the-shelf mechanical parts and optics, the design of custom-built mechanical parts waskept as simple as possible. Hence, the overall cost for the setup is greatly reduced. The AFM controller was developed using National Instruments Educational Laboratory Virtual Instrumentation Suite (NI ELVIS, an integrated hardware and software platform which can be programmed in LabVIEW. A simple yet effective control algorithm for scanning and feedback control was developed. Despite the use of an educational platform and low-cost components from the undergraduate laboratory, the developed AFM is capable of performing imaging in constant-force mode with submicron resolution and at reasonable scanning speed (approximately 18 min per image. Therefore, the AFM is suitable to be used as an educational tool for nanoscience. Moreover, the construction of the system can be a valuable educational experience for electronic and mechanical engineering students.

Wood-Based Nanotechnologies toward Sustainability.

Science.gov (United States)

Jiang, Feng; Li, Tian; Li, Yiju; Zhang, Ying; Gong, Amy; Dai, Jiaqi; Hitz, Emily; Luo, Wei; Hu, Liangbing

2018-01-01

With over 30% global land coverage, the forest is one of nature's most generous gifts to human beings, providing shelters and materials for all living beings. Apart from being sustainable, renewable, and biodegradable, wood and its derivative materials are also extremely fascinating from a materials aspect, with numerous advantages including porous and hierarchical structure, excellent mechanical performance, and versatile chemistry. Here, strategies for designing novel wood-based materials via advanced nanotechnologies are summarized, including both the controllable bottom-up assembly from the highly crystalline nanocellulose building block and the more efficient top-down approaches directly from wood. Beyond material design, recent advances regarding the sustainable applications of these novel wood-based materials are also presented, focusing on areas that are traditionally dominated by man-made nonrenewable materials such as plastic, glass, and metals, as well as more advanced applications in the areas of energy storage, wastewater treatment and solar-steam-assisted desalination. With all recent progress pertaining to materials' design and sustainable applications presented, a vision for the future engineering of wood-based materials to promote continuous and healthy progress toward true sustainability is outlined. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nanotechnology: The new perspective in precision agriculture

Directory of Open Access Journals (Sweden)

Joginder Singh Duhan

2017-09-01

Full Text Available Nanotechnology is an interdisciplinary research field. In recent past efforts have been made to improve agricultural yield through exhaustive research in nanotechnology. The green revolution resulted in blind usage of pesticides and chemical fertilizers which caused loss of soil biodiversity and developed resistance against pathogens and pests as well. Nanoparticle-mediated material delivery to plants and advanced biosensors for precision farming are possible only by nanoparticles or nanochips. Nanoencapsulated conventional fertilizers, pesticides and herbicides helps in slow and sustained release of nutrients and agrochemicals resulting in precise dosage to the plants. Nanotechnology based plant viral disease detection kits are also becoming popular and are useful in speedy and early detection of viral diseases. In this article, the potential uses and benefits of nanotechnology in precision agriculture are discussed. The modern nanotechnology based tools and techniques have the potential to address the various problems of conventional agriculture and can revolutionize this sector.

EDITORIAL: Terahertz nanotechnology Terahertz nanotechnology

Science.gov (United States)

Demming, Anna; Tonouchi, Masayoshi; Reno, John L.

2013-05-01

within the THz spectral region providing an additional benefit. His review describes the principle, characteristics, and applications of terahertz molecular imaging, where the use of nanoparticle probes allows dramatically enhanced sensitivity. Jiaguang Han and Weili Zhang and colleagues in China, Saudi Arabia, Japan and the US report exciting developments for optoelectronics [11]. They describe work on plasmon-induced transparency (PIT), an analogue of electromagnetically induced transparency (EIT) where interference leads to a sharp transparency window that may be useful for nonlinear and slow-light devices, optical switching, pulse delay, and storage for optical information processing. While PIT has advantages over the cumbersome experimental systems required for EIT, it has so far been constrained to very narrow band operation. Now Zhang and colleagues present the simulation, implementation, and measurement of a broadband PIT metamaterial functioning across a frequency range greater than 0.40 THz in the terahertz regime. 'We can foresee a historic breakthrough for science and technology through terahertz research,' concluded Masayoshi Tonouchi in his review over five years ago as momentum in the field was mounting [12]. He added, 'It is also noteworthy that THz research is built on many areas of science and the coordination of a range of disciplines is giving birth to a new science.' With the inherently multidisciplinary nature of nanotechnology research it is not so strange to see the marriage of the two fields form such a fruitful partnership, as this special section highlights. References [1] Williams B S, Kumar S, Hu Q and Reno J L 2006 High-power terahertz quantum-cascade lasers Electron. Lett. 42 89-91 [2] Köhler R et al 2002 Terahertz semiconductor-heterostructure laser Nature 417 156-9 [3] Mittendorff M, Xu M, Dietz R J B, K¨unzel H, Sartorius B, Schneider H, Helm M and Winnerl S 2013 Large area photoconductive THz emitter for 1.55 μm excitation based on

The effect of nanotechnology on education

Science.gov (United States)

Viriyavejakul, Chantana

2008-04-01

The research objective was to study 1) the situation and readiness of the Thai education for the integration of nanotechnology and 2) to propose the plans, the strategies and guidelines for educational reform to adapt nanotechnology to the system. The data collection was done by 4 methods: 1) documentary study, 2) observation, 3) informal interviews, and 4) group discussion. The findings revealed that: 1. William Wresch's Theory (1997) was used in this research to study of the situation and readiness of the Thai education for the integration of nanotechnology. 1) Getting connected to nanotechnology by search engine websites, libraries, magazines, books, and discussions with experts. 2) Curriculum integration: nanotechnology should be integrated in many branches of engineering, such as industrial, computer, civil, chemical, electrical, mechanical, etc. 3) Resources for educators: nanotechnology knowledge should be spread in academic circles by publications and the Internet websites. 4) Training and professional resources for teachers: Teachers should be trained by experts in nanotechnology and researchers from the National Nanotechnology Center. This will help trainees get correct knowledge, comprehension, and awareness in order to apply to their professions and businesses in the future. 2. As for the plans, the strategies, and guidelines for educational reform to adapt nanotechnology to the present system, I analyzed the world nanotechnology situation that might have an effect on Thai society. The study is based on the National Plan to Develop Nanotechnology. The goal of this plan is to develop nanotechnology to be the national strategy within 10 years (2004-2013) and have it integrated into the Thai system. There are 4 parts in this plan: 1) nanomaterials, 2) nanoelectronics, 3) nanobiotechnology, and 4) human resources development. Data for human resource development should be worked with the present technology and use the country's resources to produce many

Nanotechnology based approaches for anti-diabetic drugs delivery.

Science.gov (United States)

Kesharwani, Prashant; Gorain, Bapi; Low, Siew Yeng; Tan, Siew Ann; Ling, Emily Chai Siaw; Lim, Yin Khai; Chin, Chuan Ming; Lee, Pei Yee; Lee, Chun Mey; Ooi, Chun Haw; Choudhury, Hira; Pandey, Manisha

2018-02-01

Nanotechnology science has been diverged its application in several fields with the advantages to operate with nanometric range of objects. Emerging field of nanotechnology has been also being approached and applied in medical biology for improved efficacy and safety. Increased success in therapeutic field has focused several approaches in the treatment of the common metabolic disorder, diabetes. The development of nanocarriers for improved delivery of different oral hypoglycemic agents compared to conventional therapies includes nanoparticles (NPs), liposomes, dendrimer, niosomes and micelles, which produces great control over the increased blood glucose level and thus becoming an eye catching and most promising technology now-a-days. Besides, embellishment of nanocarriers with several ligands makes it more targeted delivery with the protection of entrapped hypoglycaemic agents against degradation, thereby optimizing prolonged blood glucose lowering effect. Thus, nanocarriers of hypoglycemic agents provide the aim towards improved diabetes management with minimized risk of acute and chronic complications. In this review, we provide an overview on distinctive features of each nano-based drug delivery system for diabetic treatment and current NPs applications in diabetes management. Copyright © 2017 Elsevier B.V. All rights reserved.

Methodological bases of innovative training of specialists in nanotechnology field

Directory of Open Access Journals (Sweden)

FIGOVSKY Oleg Lvovich

2016-10-01

Full Text Available The performance of innovative training system aimed at highly intellectual specialists in the area of nanotechnologies for Kazakhstan’s economy demands establishment and development of nanotechnological market in the country, teaching of innovative engineering combined with consistent research, integration of trained specialists with latest technologies and sciences at the international level. Methodological aspects of training competitive specialists for nanotechnological field are specific. The paper presents methodological principles of innovative training of specialists for science-intensive industry that were realized according to grant given by the Ministry of Education and Science of the Republic of Kazakhstan.

Cancer Nanotechnology Plan

Science.gov (United States)

The Cancer Nanotechnology Plan serves as a strategic document to the NCI Alliance for Nanotechnology in Cancer as well as a guiding document to the cancer nanotechnology and oncology fields, as a whole.

The future of nanotechnology

International Nuclear Information System (INIS)

Jones, Richard

2005-01-01

Visions of self-replicating nanomachines that could devour the Earth in a 'grey goo' are probably wide of the mark, but 'radical nanotechnology' could still deliver great benefits to society. The question is how best to achieve this goal. What we could call 'incremental nanotechnology' involves improving the properties of many materials by controlling their nano-scale structure. Plastics, for example, can be reinforced using nano-scale clay particles, making them stronger, stiffer and more chemically resistant. Cosmetics can be formulated such that the oil phase is much more finely dispersed, thereby improving the feel of the product on the skin. These are the sorts of commercially available products that are said to be based on nanotechnology. The science underlying them is sophisticated and the products are often big improvements on what has gone before. However, they do not really represent a decisive break from the past. In 'evolutionary nanotechnology' we move beyond simple materials that have been redesigned at the nano-scale to actual nano-scale devices that do something interesting. Such devices can, for example, sense the environment, process information or convert energy from one form to another. They include nano-scale sensors, which exploit the huge surface area of carbon nanotubes and other nano-structured materials to detect environmental contaminants or biochemicals. Other products of evolutionary nanotechnology are semiconductor nanostructures - such as quantum dots and quantum wells - that are being used to build better solid-state lasers. Scientists are also developing ever more sophisticated ways of encapsulating molecules and delivering them on demand for targeted drug delivery. Taken together, incremental and evolutionary nanotechnology are driving the current excitement in industry and academia for all things nano-scale. The biggest steps are currently being made in evolutionary nanotechnology, more and more products of which should appear on

Nanotechnology in health care

CERN Document Server

Sahoo, Sanjeeb K

2012-01-01

Nanomedicine: Emerging Field of Nanotechnology to Human HealthNanomedicines: Impacts in Ocular Delivery and TargetingImmuno-Nanosystems to CNS Pathologies: State of the Art PEGylated Zinc Protoporphyrin: A Micelle-Forming Polymeric Drug for Cancer TherapyORMOSIL Nanoparticles: Nanomedicine Approach for Drug/Gene Delivery to the BrainMagnetic Nanoparticles: A Versatile System for Therapeutic and Imaging SystemNanobiotechnology: A New Generation of Biomedicine Application of Nanotechnology-Based Drug Delivery and Targeting to LungsAptamers and Nanomedicine in C

Microsystems and nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Zhou, Zhaoying [Tsinghua Univ., Beijing (China). Dept. of Precision Instruments and Mechanology; Lin, Liwei [California Univ., Berkeley, CA (United States). Dept. of Mechanical Engineering; Wang, Zhonglin (eds.) [Georgia Institute of Technology, Atlanta, GA (United States). Center for Nanostructure Characterization and Fabrication (CNCF)

2012-07-01

This book presents the latest science and engineering research and achievements in the fields of microsystems and nanotechnology, bringing together contributions by authoritative experts from the United States, Germany, Great Britain, Japan and China to discuss the latest advances in microelectromechanical systems (MEMS) technology and micro/nanotechnology. The book is divided into five parts - the fundamentals of microsystems and nanotechnology, microsystems technology, nanotechnology, application issues, and the developments and prospects.

Transferring Science-based Technologies to Industry - Does Nanotechnology Make a Difference?

OpenAIRE

Palmberg, Christopher; Pajarinen, Mika; Nikulainen, Tuomo

2007-01-01

Nanotechnology has been touted as a general purpose technology (GPT) and engine of growth for the 21th century, following in the footsteps of ICT. Nanotechnology is still in an early phase of development, it is scientist driven and thus largely exogenous to the economy at present. In Finland the interest towards nanotechnology is also growing. This is visible especially through relatively large public R&D expenditures and numbers of scientific publications. A key question for the further deve...

Nanotechnology in Textiles.

Science.gov (United States)

Yetisen, Ali K; Qu, Hang; Manbachi, Amir; Butt, Haider; Dokmeci, Mehmet R; Hinestroza, Juan P; Skorobogatiy, Maksim; Khademhosseini, Ali; Yun, Seok Hyun

2016-03-22

Increasing customer demand for durable and functional apparel manufactured in a sustainable manner has created an opportunity for nanomaterials to be integrated into textile substrates. Nanomoieties can induce stain repellence, wrinkle-freeness, static elimination, and electrical conductivity to fibers without compromising their comfort and flexibility. Nanomaterials also offer a wider application potential to create connected garments that can sense and respond to external stimuli via electrical, color, or physiological signals. This review discusses electronic and photonic nanotechnologies that are integrated with textiles and shows their applications in displays, sensing, and drug release within the context of performance, durability, and connectivity. Risk factors including nanotoxicity, nanomaterial release during washing, and environmental impact of nanotextiles based on life cycle assessments have been evaluated. This review also provides an analysis of nanotechnology consolidation in the textiles market to evaluate global trends and patent coverage, supplemented by case studies of commercial products. Perceived limitations of nanotechnology in the textile industry and future directions are identified.

Artificial intelligence in nanotechnology.

Science.gov (United States)

Sacha, G M; Varona, P

2013-11-15

During the last decade there has been increasing use of artificial intelligence tools in nanotechnology research. In this paper we review some of these efforts in the context of interpreting scanning probe microscopy, the study of biological nanosystems, the classification of material properties at the nanoscale, theoretical approaches and simulations in nanoscience, and generally in the design of nanodevices. Current trends and future perspectives in the development of nanocomputing hardware that can boost artificial-intelligence-based applications are also discussed. Convergence between artificial intelligence and nanotechnology can shape the path for many technological developments in the field of information sciences that will rely on new computer architectures and data representations, hybrid technologies that use biological entities and nanotechnological devices, bioengineering, neuroscience and a large variety of related disciplines.

Artificial intelligence in nanotechnology

Science.gov (United States)

Sacha, G. M.; Varona, P.

2013-11-01

During the last decade there has been increasing use of artificial intelligence tools in nanotechnology research. In this paper we review some of these efforts in the context of interpreting scanning probe microscopy, the study of biological nanosystems, the classification of material properties at the nanoscale, theoretical approaches and simulations in nanoscience, and generally in the design of nanodevices. Current trends and future perspectives in the development of nanocomputing hardware that can boost artificial-intelligence-based applications are also discussed. Convergence between artificial intelligence and nanotechnology can shape the path for many technological developments in the field of information sciences that will rely on new computer architectures and data representations, hybrid technologies that use biological entities and nanotechnological devices, bioengineering, neuroscience and a large variety of related disciplines.

Artificial intelligence in nanotechnology

International Nuclear Information System (INIS)

Sacha, G M; Varona, P

2013-01-01

During the last decade there has been increasing use of artificial intelligence tools in nanotechnology research. In this paper we review some of these efforts in the context of interpreting scanning probe microscopy, the study of biological nanosystems, the classification of material properties at the nanoscale, theoretical approaches and simulations in nanoscience, and generally in the design of nanodevices. Current trends and future perspectives in the development of nanocomputing hardware that can boost artificial-intelligence-based applications are also discussed. Convergence between artificial intelligence and nanotechnology can shape the path for many technological developments in the field of information sciences that will rely on new computer architectures and data representations, hybrid technologies that use biological entities and nanotechnological devices, bioengineering, neuroscience and a large variety of related disciplines. (topical review)

EDITORIAL: Quantum phenomena in Nanotechnology Quantum phenomena in Nanotechnology

Science.gov (United States)

Loss, Daniel

2009-10-01

Twenty years ago the Institute of Physics launched the journal Nanotechnology from its publishing house based in the home town of Paul Dirac, a legendary figure in the development of quantum mechanics at the turn of the last century. At the beginning of the 20th century, the adoption of quantum mechanical descriptions of events transformed the existing deterministic world view. But in many ways it also revolutionised the progress of research itself. For the first time since the 17th century when Francis Bacon established inductive reasoning as the means of advancing science from fact to axiom to law, theory was progressing ahead of experiments instead of providing explanations for observations that had already been made. Dirac's postulation of antimatter through purely theoretical investigation before its observation is the archetypal example of theory leading the way for experiment. The progress of nanotechnology and the development of tools and techniques that enabled the investigation of systems at the nanoscale brought with them many fascinating observations of phenomena that could only be explained through quantum mechanics, first theoretically deduced decades previously. At the nanoscale, quantum confinement effects dominate the electrical and optical properties of systems. They also render new opportunities for manipulating the response of systems. For example, a better understanding of these systems has enabled the rapid development of quantum dots with precisely determined properties, which can be exploited in a range of applications from medical imaging and photovoltaic solar cells to quantum computation, a radically new information technology being currently developed in many labs worldwide. As the first ever academic journal in nanotechnology, {\\it Nanotechnology} has been the forum for papers detailing progress of the science through extremely exciting times. In the early years of the journal, the investigation of electron spin led to the formulation

A social shaping perspective on nanotechnologies

DEFF Research Database (Denmark)

Clausen, Christian; Jørgensen, Michael Søgaard

2005-01-01

in areas where visions are manifold and applications and markets are non-existing or unclear. The emerging idea of 'nanotechnologies' is an example of this kind, where techno-economic networks are unstable or under construction and consequences are difficult, if not impossible to evaluate. The paper...... explores the potential of a social shaping of technology approach in the area of emerging nano-technologies and debate the methodological aspects based on an ongoing Danish foresight project concerned with environmental risks and opportunities in nanotechnologies. The focus is on the identification...

FRAME (Force Review Automation Environment): MATLAB-based AFM data processor.

Science.gov (United States)

Partola, Kostyantyn R; Lykotrafitis, George

2016-05-03

Data processing of force-displacement curves generated by atomic force microscopes (AFMs) for elastic moduli and unbinding event measurements is very time consuming and susceptible to user error or bias. There is an evident need for consistent, dependable, and easy-to-use AFM data processing software. We have developed an open-source software application, the force review automation environment (or FRAME), that provides users with an intuitive graphical user interface, automating data processing, and tools for expediting manual processing. We did not observe a significant difference between manually processed and automatically processed results from the same data sets. Copyright © 2016 Elsevier Ltd. All rights reserved.

TiO2-Based Advanced Oxidation Nanotechnologies For Water Purification And Reuse

Science.gov (United States)

TiO2 photocatalysis, one of the UV-based advanced oxidation technologies (AOTs) and nanotechnologies (AONs), has attracted great attention for the development of efficient water treatment and purification systems due to the effectiveness of TiO2 to generate ...

Hydration states of AFm cement phases

Energy Technology Data Exchange (ETDEWEB)

Baquerizo, Luis G., E-mail: luis.baquerizoibarra@holcim.com [Innovation, Holcim Technology Ltd., CH-5113 Holderbank (Switzerland); Matschei, Thomas [Innovation, Holcim Technology Ltd., CH-5113 Holderbank (Switzerland); Scrivener, Karen L. [Laboratory of Construction Materials, Ecole Polytechnique Fédérale de Lausanne, CH-1015 Lausanne (Switzerland); Saeidpour, Mahsa; Wadsö, Lars [Building Materials, Lund University, Box 124, 221 000 Lund (Sweden)

2015-07-15

The AFm phase, one of the main products formed during the hydration of Portland and calcium aluminate cement based systems, belongs to the layered double hydrate (LDH) family having positively charged layers and water plus charge-balancing anions in the interlayer. It is known that these phases present different hydration states (i.e. varying water content) depending on the relative humidity (RH), temperature and anion type, which might be linked to volume changes (swelling and shrinkage). Unfortunately the stability conditions of these phases are insufficiently reported. This paper presents novel experimental results on the different hydration states of the most important AFm phases: monocarboaluminate, hemicarboaluminate, strätlingite, hydroxy-AFm and monosulfoaluminate, and the thermodynamic properties associated with changes in their water content during absorption/desorption. This data opens the possibility to model the response of cementitious systems during drying and wetting and to engineer systems more resistant to harsh external conditions.

Coupling effects of refractive index discontinuity, spot size and spot location on the deflection sensitivity of optical-lever based atomic force microscopy

International Nuclear Information System (INIS)

Liu Yu; Yang Jun

2008-01-01

Atomic force microscopy (AFM) plays an essential role in nanotechnology and nanoscience. The recent advances of AFM in bionanotechnology include phase imaging of living cells and detection of biomolecular interactions in liquid biological environments. Deflection sensitivity is a key factor in both imaging and force measurement, which is significantly affected by the coupling effects of the refractive index discontinuity between air, the glass window and the liquid medium, and the laser spot size and spot location. The effects of both the spot size and the spot location on the sensitivity are amplified by the refractive index discontinuity. The coupling effects may govern a transition of the deflection sensitivity from enhancement to degradation. It is also found that there is a critical value for the laser spot size, above which the deflection sensitivity is mainly determined by the refractive index of the liquid. Experimental results, in agreement with theoretical predication, elucidate the coupling effects

MetaRep, an extended CMAS 3D program to visualize mafic (CMAS, ACF-S, ACF-N) and pelitic (AFM-K, AFM-S, AKF-S) projections

Science.gov (United States)

France, Lydéric; Nicollet, Christian

2010-06-01

MetaRep is a program based on our earlier program CMAS 3D. It is developed in MATLAB ® script. MetaRep objectives are to visualize and project major element compositions of mafic and pelitic rocks and their minerals in the pseudo-quaternary projections of the ACF-S, ACF-N, CMAS, AFM-K, AFM-S and AKF-S systems. These six systems are commonly used to describe metamorphic mineral assemblages and magmatic evolutions. Each system, made of four apices, can be represented in a tetrahedron that can be visualized in three dimensions with MetaRep; the four tetrahedron apices represent oxides or combination of oxides that define the composition of the projected rock or mineral. The three-dimensional representation allows one to obtain a better understanding of the topology of the relationships between the rocks and minerals and relations. From these systems, MetaRep can also project data in ternary plots (for example, the ACF, AFM and AKF ternary projections can be generated). A functional interface makes it easy to use and does not require any knowledge of MATLAB ® programming. To facilitate the use, MetaRep loads, from the main interface, data compiled in a Microsoft Excel ™ spreadsheet. Although useful for scientific research, the program is also a powerful tool for teaching. We propose an application example that, by using two combined systems (ACF-S and ACF-N), provides strong confirmation in the petrological interpretation.

Nanotechnology-based water treatment strategies.

Science.gov (United States)

Kumar, Sandeep; Ahlawat, Wandit; Bhanjana, Gaurav; Heydarifard, Solmaz; Nazhad, Mousa M; Dilbaghi, Neeraj

2014-02-01

The most important component for living beings on the earth is access to clean and safe drinking water. Globally, water scarcity is pervasive even in water-rich areas as immense pressure has been created by the burgeoning human population, industrialization, civilization, environmental changes and agricultural activities. The problem of access to safe water is inevitable and requires tremendous research to devise new, cheaper technologies for purification of water, while taking into account energy requirements and environmental impact. This review highlights nanotechnology-based water treatment technologies being developed and used to improve desalination of sea and brackish water, safe reuse of wastewater, disinfection and decontamination of water, i.e., biosorption and nanoadsorption for contaminant removal, nanophotocatalysis for chemical degradation of contaminants, nanosensors for contaminant detection, different membrane technologies including reverse osmosis, nanofiltration, ultrafiltration, electro-dialysis etc. This review also deals with the fate and transport of engineered nanomaterials in water and wastewater treatment systems along with the risks associated with nanomaterials.

Nanotechnology for Cancer Therapy Based on Chemotherapy

Directory of Open Access Journals (Sweden)

Chen-Yang Zhao

2018-04-01

Full Text Available Chemotherapy has been widely applied in clinics. However, the therapeutic potential of chemotherapy against cancer is seriously dissatisfactory due to the nonspecific drug distribution, multidrug resistance (MDR and the heterogeneity of cancer. Therefore, combinational therapy based on chemotherapy mediated by nanotechnology, has been the trend in clinical research at present, which can result in a remarkably increased therapeutic efficiency with few side effects to normal tissues. Moreover, to achieve the accurate pre-diagnosis and real-time monitoring for tumor, the research of nano-theranostics, which integrates diagnosis with treatment process, is a promising field in cancer treatment. In this review, the recent studies on combinational therapy based on chemotherapy will be systematically discussed. Furthermore, as a current trend in cancer treatment, advance in theranostic nanoparticles based on chemotherapy will be exemplified briefly. Finally, the present challenges and improvement tips will be presented in combination therapy and nano-theranostics.

Nanotechnology and nanocarrier-based approaches on treatment of degenerative diseases

Science.gov (United States)

Chowdhury, Anindita; Kunjiappan, Selvaraj; Panneerselvam, Theivendren; Somasundaram, Balasubramanian; Bhattacharjee, Chiranjib

2017-04-01

Degenerative diseases are results of deterioration of cells and tissues with aging either by unhealthy lifestyle or normal senescence. The degenerative disease likely affects central nervous system and cardiovascular system to a great extent. Certain medications and therapies have emerged for the treatment of degenerative diseases, but in most cases bearing with poor solubility, lower bioavailability, drug resistance, and incapability to cross the blood-brain barrier (BBB). Hence, it has to be overcome with conventional treatment system; in this connection, nanotechnology has gained a great deal of interest in recent years. Moreover, nanotechnology and nanocarrier-based approach drug delivery system could revolutionize the treatment of degenerative diseases by faster absorption of drug, targeted interaction at specific site, and its release in a controlled manner into human body with minimal side effects. The core objective of this review is to customize and formulate therapeutically active molecules with specific site of action and without affecting other organs and tissues to obtain effective result in the improvement of quality of health. In addition, the review provides a concise insight into the recent developments and applications of nanotech and nanocarrier-based drug delivery for the treatment of various degenerative diseases.

Recent Trends in Nanotechnology-Based Drugs and Formulations for Targeted Therapeutic Delivery.

Science.gov (United States)

Iqbal, Hafiz M N; Rodriguez, Angel M V; Khandia, Rekha; Munjal, Ashok; Dhama, Kuldeep

2017-01-01

In the recent past, a wider spectrum of nanotechnologybased drugs or drug-loaded devices and systems has been engineered and investigated with high interests. The key objective is to help for an enhanced/better quality of patient life in a secure way by avoiding/limiting drug abuse, or severe adverse effects of some in practice traditional therapies. Various methodological approaches including in vitro, in vivo, and ex vivo techniques have been exploited, so far. Among them, nanoparticles-based therapeutic agents are of supreme interests for an enhanced and efficient delivery in the current biomedical sector of the modern world. The development of new types of novel, effective and highly reliable therapeutic drug delivery system (DDS) for multipurpose applications is essential and a core demand to tackle many human health related diseases. In this context, nanotechnology-based several advanced DDS have been engineered with novel characteristics for biomedical, pharmaceutical and cosmeceutical applications that include but not limited to the enhanced/improved bioactivity, bioavailability, drug efficacy, targeted delivery, and therapeutically safer with an extra advantage of overcoming demerits of traditional drug formulations/designs. This review work is focused on recent trends/advances in nanotechnology-based drugs and formulations designed for targeted therapeutic delivery. Moreover, information is also reviewed and given from recent patents and summarized or illustrated diagrammatically to depict a better understanding. Recent patents covering various nanotechnology-based approaches for several applications have also been reviewed. The drug-loaded nanoparticles are among versatile candidates with multifunctional characteristics for potential applications in biomedical, and tissue engineering sector. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

NANOTECHNOLOGY, NANOMEDICINE; ETHICAL ASPECTS.

Science.gov (United States)

Gökçay, Banu; Arda, Berna

2015-01-01

Nanotechnology is a field that we often hear of its name nowadays. Altough what we know about it is soo poor, we admire this field of technlogy, moreover some societies even argues that nanotechnology will cause second endustrial revolution. In addition, nanotechnology makes our basic scientific knowledge upside down and is soo powerfull that it is potent in nearly every scientific field. Thereby, it is imposible to say that nanotechnology; which is soo effective on human and human life; will not cause social and ethical outcomes. In general, the definition of nanotechnology is the reconfiguration of nanomaterials by human; there also are different definitions according to the history of nanotechnology and different point of views. First of all, in comparison to the other tehnology fields, what is the cause of excellence of nanotechnology, what human can do is to foresee the advantages and disadvantages of it, what are the roles of developed and developping countries for the progression of nanotechnology, what is the attitude of nanoethics and what is view of global politics to nanotechological research according to international regulations are all the focus of interests of this study. Last but not least, our apprehension capacity of nanotechnology, our style of adoption and evaluation of it and the way that how we locate nanotechnology in our lifes and ethical values are the other focus of interests.

78 FR 60319 - Request for Information: NNI Nanotechnology for Sensors and Sensors for Nanotechnology Signature...

Science.gov (United States)

2013-10-01

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY NATIONAL NANOTECHNOLOGY COORDINATION OFFICE Request for Information: NNI Nanotechnology for Sensors and Sensors for Nanotechnology Signature Initiative ACTION: Notice... the value of the National Nanotechnology Initiative (NNI) and of the Nanotechnology Signature...

Nanovate commercializing disruptive nanotechnologies

CERN Document Server

Anis, Mohab; Sarhan, Wesam; Elsemary, Mona

2017-01-01

This book introduces readers from diverse backgrounds to the principles underlying nanotechnology, from devices to systems, while also describing in detail how businesses can use nanotechnology to redesign their products and processes, in order to have a clear edge over their competition. The authors include 75 case studies, describing in a highly-accessible manner, real nanotechnology innovations from 15 different industrial sectors. For each case study, the technology or business challenges faced by the company are highlighted, the type of nanotechnology adopted is defined, and the eventual economic and social impact is described. Introduces fundamentals of nanotechnology and its applications in a highly-accessible manner Includes 75 case studies of commercializing nanotechnology from 15 industrial sectors, including Automotive, Consumer Electronics, and Renewable Energy Enables nanotechnology experts to learn simple and important business concepts to facilitate the transfer of science to the market Introdu...

Sociocultural Meanings of Nanotechnology: Research Methodologies

Science.gov (United States)

Bainbridge, William Sims

2004-06-01

This article identifies six social-science research methodologies that will be useful for charting the sociocultural meaning of nanotechnology: web-based questionnaires, vignette experiments, analysis of web linkages, recommender systems, quantitative content analysis, and qualitative textual analysis. Data from a range of sources are used to illustrate how the methods can delineate the intellectual content and institutional structure of the emerging nanotechnology culture. Such methods will make it possible in future to test hypotheses such as that there are two competing definitions of nanotechnology - the technical-scientific and the science-fiction - that are influencing public perceptions by different routes and in different directions.

Monitoring nanotechnology using patent classifications: an overview and comparison of nanotechnology classification schemes

Energy Technology Data Exchange (ETDEWEB)

Jürgens, Björn, E-mail: bjurgens@agenciaidea.es [Agency of Innovation and Development of Andalusia, CITPIA PATLIB Centre (Spain); Herrero-Solana, Victor, E-mail: victorhs@ugr.es [University of Granada, SCImago-UGR (SEJ036) (Spain)

2017-04-15

Patents are an essential information source used to monitor, track, and analyze nanotechnology. When it comes to search nanotechnology-related patents, a keyword search is often incomplete and struggles to cover such an interdisciplinary discipline. Patent classification schemes can reveal far better results since they are assigned by experts who classify the patent documents according to their technology. In this paper, we present the most important classifications to search nanotechnology patents and analyze how nanotechnology is covered in the main patent classification systems used in search systems nowadays: the International Patent Classification (IPC), the United States Patent Classification (USPC), and the Cooperative Patent Classification (CPC). We conclude that nanotechnology has a significantly better patent coverage in the CPC since considerable more nanotechnology documents were retrieved than by using other classifications, and thus, recommend its use for all professionals involved in nanotechnology patent searches.

Monitoring nanotechnology using patent classifications: an overview and comparison of nanotechnology classification schemes

International Nuclear Information System (INIS)

Jürgens, Björn; Herrero-Solana, Victor

2017-01-01

Patents are an essential information source used to monitor, track, and analyze nanotechnology. When it comes to search nanotechnology-related patents, a keyword search is often incomplete and struggles to cover such an interdisciplinary discipline. Patent classification schemes can reveal far better results since they are assigned by experts who classify the patent documents according to their technology. In this paper, we present the most important classifications to search nanotechnology patents and analyze how nanotechnology is covered in the main patent classification systems used in search systems nowadays: the International Patent Classification (IPC), the United States Patent Classification (USPC), and the Cooperative Patent Classification (CPC). We conclude that nanotechnology has a significantly better patent coverage in the CPC since considerable more nanotechnology documents were retrieved than by using other classifications, and thus, recommend its use for all professionals involved in nanotechnology patent searches.

Lipid Nanotechnology

Directory of Open Access Journals (Sweden)

Gijsje Koenderink

2013-02-01

Full Text Available Nanotechnology is a multidisciplinary field that covers a vast and diverse array of devices and machines derived from engineering, physics, materials science, chemistry and biology. These devices have found applications in biomedical sciences, such as targeted drug delivery, bio-imaging, sensing and diagnosis of pathologies at early stages. In these applications, nano-devices typically interface with the plasma membrane of cells. On the other hand, naturally occurring nanostructures in biology have been a source of inspiration for new nanotechnological designs and hybrid nanostructures made of biological and non-biological, organic and inorganic building blocks. Lipids, with their amphiphilicity, diversity of head and tail chemistry, and antifouling properties that block nonspecific binding to lipid-coated surfaces, provide a powerful toolbox for nanotechnology. This review discusses the progress in the emerging field of lipid nanotechnology.

Recent progress in the therapeutic applications of nanotechnology.

Science.gov (United States)

Solomon, Melani; D'Souza, Gerard G M

2011-04-01

The field of pharmaceutical and medical nanotechnology has grown rapidly in recent decades and offers much promise for therapeutic advances. This review is intended to serve as a quick summary of the major areas in the therapeutic application of nanotechnology. Nanotechnology for therapeutic application falls into two broad categories of particulate systems and nanoengineered devices. Recent studies appear to focus on the development of multifunctional particles for drug delivery and imaging and the development of nanotechnology-based biosensors for diagnostic applications. Cancer treatment and diagnosis appears to be the principal focus of many of these applications, but nanotechnology is also finding application in tissue engineering and surface engineering of medical implants. Particulate drug delivery systems in general appear to be poised for increased use in the clinic, whereas nanoengineered implants and diagnostic sensors might well be the next major wave in the medical use of nanotechnology.

Nanotechnology Applications for Glaucoma.

Science.gov (United States)

Cetinel, Sibel; Montemagno, Carlo

2016-01-01

Glaucoma is the second leading cause of blindness worldwide, and the antiglaucoma treatments currently available suffer from various complications. Nanotechnology-based treatments show a great deal of promise in overcoming these complications and form the basis for next-generation glaucoma treatment strategies, with the help of applications such as controlled release, targeted delivery, increased bioavailability, diffusion limitations, and biocompatibility. Significant progress has been made in nanomedicine in the efficiency of antiglaucoma medications, nanofabrication systems such as microelectromechanical systems that remove the limitations of nanodevices, and tissue regeneration vesicles for developing glaucoma treatments not based on intraocular pressure. With the use of these advanced technologies, the prevention of glaucoma-induced blindness will be possible in the near future. Herein, we reviewed the recent advances in nanotechnology-based treatment strategies for glaucoma.

Recent insights in nanotechnology-based drugs and formulations designed for effective anti-cancer therapy.

Science.gov (United States)

Piktel, Ewelina; Niemirowicz, Katarzyna; Wątek, Marzena; Wollny, Tomasz; Deptuła, Piotr; Bucki, Robert

2016-05-26

The rapid development of nanotechnology provides alternative approaches to overcome several limitations of conventional anti-cancer therapy. Drug targeting using functionalized nanoparticles to advance their transport to the dedicated site, became a new standard in novel anti-cancer methods. In effect, the employment of nanoparticles during design of antineoplastic drugs helps to improve pharmacokinetic properties, with subsequent development of high specific, non-toxic and biocompatible anti-cancer agents. However, the physicochemical and biological diversity of nanomaterials and a broad spectrum of unique features influencing their biological action requires continuous research to assess their activity. Among numerous nanosystems designed to eradicate cancer cells, only a limited number of them entered the clinical trials. It is anticipated that progress in development of nanotechnology-based anti-cancer materials will provide modern, individualized anti-cancer therapies assuring decrease in morbidity and mortality from cancer diseases. In this review we discussed the implication of nanomaterials in design of new drugs for effective antineoplastic therapy and describe a variety of mechanisms and challenges for selective tumor targeting. We emphasized the recent advantages in the field of nanotechnology-based strategies to fight cancer and discussed their part in effective anti-cancer therapy and successful drug delivery.

Nanotechnology: emerging tools for biology and medicine.

Science.gov (United States)

Wong, Ian Y; Bhatia, Sangeeta N; Toner, Mehmet

2013-11-15

Historically, biomedical research has been based on two paradigms. First, measurements of biological behaviors have been based on bulk assays that average over large populations. Second, these behaviors have then been crudely perturbed by systemic administration of therapeutic treatments. Nanotechnology has the potential to transform these paradigms by enabling exquisite structures comparable in size with biomolecules as well as unprecedented chemical and physical functionality at small length scales. Here, we review nanotechnology-based approaches for precisely measuring and perturbing living systems. Remarkably, nanotechnology can be used to characterize single molecules or cells at extraordinarily high throughput and deliver therapeutic payloads to specific locations as well as exhibit dynamic biomimetic behavior. These advances enable multimodal interfaces that may yield unexpected insights into systems biology as well as new therapeutic strategies for personalized medicine.

Nanotechnology for missiles

Science.gov (United States)

Ruffin, Paul B.

2004-07-01

Nanotechnology development is progressing very rapidly. Several billions of dollars have been invested in nanoscience research since 2000. Pioneering nanotechnology research efforts have been primarily conducted at research institutions and centers. This paper identifies developments in nanoscience and technology that could provide significant advances in missile systems applications. Nanotechnology offers opportunities in the areas of advanced materials for coatings, including thin-film optical coatings, light-weight, strong armor and missile structural components, embedded computing, and "smart" structures; nano-particles for explosives, warheads, turbine engine systems, and propellants to enhance missile propulsion; nano-sensors for autonomous chemical detection; and nano-tube arrays for fuel storage and power generation. The Aviation and Missile Research, Development, and Engineering Center (AMRDEC) is actively collaborating with academia, industry, and other Government agencies to accelerate the development and transition of nanotechnology to favorably impact Army Transformation. Currently, we are identifying near-term applications and quantifying requirements for nanotechnology use in Army missile systems, as well as monitoring and screening research and developmental efforts in the industrial community for military applications. Combining MicroElectroMechanical Systems (MEMS) and nanotechnology is the next step toward providing technical solutions for the Army"s transformation. Several research and development projects that are currently underway at AMRDEC in this technology area are discussed. A top-level roadmap of MEMS/nanotechnology development projects for aviation and missile applications is presented at the end.

Recent Advances in Nanotechnology-Based Diagnosis and Treatments of Diabetes.

Science.gov (United States)

Rao, Pasupuleti Visweswara; Gan, Siew Hua

2015-01-01

Nanotechnology is a field encompassing nanostructures, nanomaterials and nanoparticles, which are of increasing importance to researchers and industrial players alike. Nanotechnology addresses the construction and consumption of substances and devices on the nanometer scale. Nanomedicine is a new field that combines nanotechnology with medicine to boost human health care. Nanomedicine is an interdisciplinary field that includes various areas of biology, chemistry, physics and engineering. The most important problems related to diabetes management, such as self-monitoring of blood glucose levels and insulin injections, can now be conquered due to progress in nanomedicine, which offers glucose nanosensors, the layer-by-layer technique, carbon nanotubes, quantum dots, oral insulins, microspheres, artificial pancreases and nanopumps. In this review, the key methodological and scientific characteristics of nanomedicine related to diabetes treatment, glucose monitoring and insulin administration are discussed.

DNA nanotechnology from the test tube to the cell.

Science.gov (United States)

Chen, Yuan-Jyue; Groves, Benjamin; Muscat, Richard A; Seelig, Georg

2015-09-01

The programmability of Watson-Crick base pairing, combined with a decrease in the cost of synthesis, has made DNA a widely used material for the assembly of molecular structures and dynamic molecular devices. Working in cell-free settings, researchers in DNA nanotechnology have been able to scale up system complexity and quantitatively characterize reaction mechanisms to an extent that is infeasible for engineered gene circuits or other cell-based technologies. However, the most intriguing applications of DNA nanotechnology - applications that best take advantage of the small size, biocompatibility and programmability of DNA-based systems - lie at the interface with biology. Here, we review recent progress in the transition of DNA nanotechnology from the test tube to the cell. We highlight key successes in the development of DNA-based imaging probes, prototypes of smart therapeutics and drug delivery systems, and explore the future challenges and opportunities for cellular DNA nanotechnology.

DNA nanotechnology from the test tube to the cell

Science.gov (United States)

Chen, Yuan-Jyue; Groves, Benjamin; Muscat, Richard A.; Seelig, Georg

2015-09-01

The programmability of Watson-Crick base pairing, combined with a decrease in the cost of synthesis, has made DNA a widely used material for the assembly of molecular structures and dynamic molecular devices. Working in cell-free settings, researchers in DNA nanotechnology have been able to scale up system complexity and quantitatively characterize reaction mechanisms to an extent that is infeasible for engineered gene circuits or other cell-based technologies. However, the most intriguing applications of DNA nanotechnology -- applications that best take advantage of the small size, biocompatibility and programmability of DNA-based systems -- lie at the interface with biology. Here, we review recent progress in the transition of DNA nanotechnology from the test tube to the cell. We highlight key successes in the development of DNA-based imaging probes, prototypes of smart therapeutics and drug delivery systems, and explore the future challenges and opportunities for cellular DNA nanotechnology.

Nanotechnology: An Untapped Resource for Food Packaging.

Science.gov (United States)

Sharma, Chetan; Dhiman, Romika; Rokana, Namita; Panwar, Harsh

2017-01-01

Food commodities are packaged and hygienically transported to protect and preserve them from any un-acceptable alteration in quality, before reaching the end-consumer. Food packaging continues to evolve along-with the innovations in material science and technology, as well as in light of consumer's demand. Presently, the modern consumers of competitive economies demands for food with natural quality, assured safety, minimal processing, extended shelf-life and ready-to-eat concept. Innovative packaging systems, not only ascertains transit preservation and effective distribution, but also facilitates communication at the consumer levels. The technological advances in the domain of food packaging in twenty-first century are mainly chaired by nanotechnology, the science of nano-materials. Nanotechnology manipulates and creates nanometer scale materials, of commercial and scientific relevance. Introduction of nanotechnology in food packaging sector has significantly addressed the food quality, safety and stability concerns. Besides, nanotechnology based packaging intimate's consumers about the real time quality of food product. Additionally, nanotechnology has been explored for controlled release of preservatives/antimicrobials, extending the product shelf life within the package. The promising reports for nanotechnology interventions in food packaging have established this as an independent priority research area. Nanoparticles based food packages offer improved barrier and mechanical properties, along with food preservation and have gained welcoming response from market and end users. In contrary, recent advances and up-liftment in this area have raised various ethical, environmental and safety concerns. Policies and regulation regarding nanoparticles incorporation in food packaging are being reviewed. This review presents the existing knowledge, recent advances, concerns and future applications of nanotechnology in food packaging sector.

Nanotechnology-Based Approach in Tuberculosis Treatment

Directory of Open Access Journals (Sweden)

Mohammad Nasiruddin

2017-01-01

Full Text Available Tuberculosis, commonly known as TB, is the second most fatal infectious disease after AIDS, caused by bacterium called Mycobacterium tuberculosis. Prolonged treatment, high pill burden, low compliance, and stiff administration schedules are factors that are responsible for emergence of MDR and XDR cases of tuberculosis. Till date, only BCG vaccine is available which is ineffective against adult pulmonary TB, which is the most common form of disease. Various unique antibodies have been developed to overcome drug resistance, reduce the treatment regimen, and elevate the compliance to treatment. Therefore, we need an effective and robust system to subdue technological drawbacks and improve the effectiveness of therapeutic drugs which still remains a major challenge for pharmaceutical technology. Nanoparticle-based ideology has shown convincing treatment and promising outcomes for chronic infectious diseases. Different types of nanocarriers have been evaluated as promising drug delivery systems for various administration routes. Controlled and sustained release of drugs is one of the advantages of nanoparticle-based antituberculosis drugs over free drug. It also reduces the dosage frequency and resolves the difficulty of low poor compliance. This paper reviews various nanotechnology-based therapies which can be used for the treatment of TB.

Institutional profile: the London Centre for Nanotechnology.

Science.gov (United States)

Weston, David; Bontoux, Thierry

2009-12-01

Located in the London neighborhoods of Bloomsbury and South Kensington, the London Centre for Nanotechnology is a UK-based multidisciplinary research center that operates at the forefront of science and technology. It is a joint venture between two of the world's leading institutions, UCL and Imperial College London, uniting their strong capabilities in the disciplines that underpin nanotechnology: engineering, the physical sciences and biomedicine. The London Centre for Nanotechnology has a unique operating model that accesses and focuses the combined skills of the Departments of Chemistry, Physics, Materials, Medicine, Electrical and Electronic Engineering, Mechanical Engineering, Chemical Engineering, Biochemical Engineering and Earth Sciences across the two universities. It aims to provide the nanoscience and nanotechnology required to solve major problems in healthcare, information processing, energy and the environment.

Determining the efficacy of a nanotechnology media product in enhancing children’s engagement with nanotechnology

International Nuclear Information System (INIS)

Waldron, Anna M.; Batt, Carl A.; Lui, Clarissa S.

2011-01-01

Public engagement in nanotechnology media products can lead to a greater interest in understanding of nanotechnology. A study was undertaken to determine middle school student engagement in Nanooze, a magazine featuring nanotechnology research that has been developed for a young adult audience. Teachers at 116 Detroit middle schools distributed two issues of the magazine to their students, and surveys were collected from 870 students after reading the magazines. Results suggest that the majority of students liked reading the magazine and learned something about nanotechnology. Engagement in nanotechnology led to understanding of nanotechnology. The Nanooze magazine was an effective medium for engaging middle school students in learning about nanotechnology.

Multifunctional Nanotechnology Research

Science.gov (United States)

2016-03-01

MULTIFUNCTIONAL NANOTECHNOLOGY RESEARCH MARCH 2016 INTERIM TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR...REPORT 3. DATES COVERED (From - To) JAN 2015 – JAN 2016 4. TITLE AND SUBTITLE MULTIFUNCTIONAL NANOTECHNOLOGY RESEARCH 5a. CONTRACT NUMBER IN-HOUSE...H. Yoon, and C. S. Hwang, “Electrically configurable electroforming and bipolar resistive switching in Pt/TiO2/Pt structures.,” Nanotechnology , vol

Measuring bacterial cells size with AFM

Directory of Open Access Journals (Sweden)

Denise Osiro

2012-03-01

Full Text Available Atomic Force Microscopy (AFM can be used to obtain high-resolution topographical images of bacteria revealing surface details and cell integrity. During scanning however, the interactions between the AFM probe and the membrane results in distortion of the images. Such distortions or artifacts are the result of geometrical effects related to bacterial cell height, specimen curvature and the AFM probe geometry. The most common artifact in imaging is surface broadening, what can lead to errors in bacterial sizing. Several methods of correction have been proposed to compensate for these artifacts and in this study we describe a simple geometric model for the interaction between the tip (a pyramidal shaped AFM probe and the bacterium (Escherichia coli JM-109 strain to minimize the enlarging effect. Approaches to bacteria immobilization and examples of AFM images analysis are also described.

Perceived risks and perceived benefits of different nanotechnology foods and nanotechnology food packaging.

Science.gov (United States)

Siegrist, Michael; Stampfli, Nathalie; Kastenholz, Hans; Keller, Carmen

2008-09-01

Nanotechnology has the potential to generate new food products and new food packaging. In a mail survey in the German speaking part of Switzerland, lay people's (N=337) perceptions of 19 nanotechnology applications were examined. The goal was to identify food applications that are more likely and food applications that are less likely to be accepted by the public. The psychometric paradigm was employed, and applications were described in short scenarios. Results suggest that affect and perceived control are important factors influencing risk and benefit perception. Nanotechnology food packaging was assessed as less problematic than nanotechnology foods. Analyses of individual data showed that the importance of naturalness in food products and trust were significant factors influencing the perceived risk and the perceived benefit of nanotechnology foods and nanotechnology food packaging.

Best Practices in Cancer Nanotechnology – Perspective from NCI Nanotechnology Alliance

Science.gov (United States)

Zamboni, William C.; Torchilin, Vladimir; Patri, Anil; Hrkach, Jeff; Stern, Stephen; Lee, Robert; Nel, Andre; Panaro, Nicholas J.; Grodzinski, Piotr

2014-01-01

Historically, treatment of patients with cancer using chemotherapeutic agents has been associated with debilitating and systemic toxicities, poor bioavailability, and unfavorable pharmacokinetics. Nanotechnology-based drug delivery systems, on the other hand, can specifically target cancer cells while avoiding their healthy neighbors, avoid rapid clearance from the body, and be administered without toxic solvents. They hold immense potential in addressing all of these issues which has hampered further development of chemotherapeutics. Furthermore, such drug delivery systems will lead to cancer therapeutic modalities which are not only less toxic to the patient but also significantly more efficacious. In addition to established therapeutic modes of action, nanomaterials are opening up entirely new modalities of cancer therapy, such as photodynamic and hyperthermia treatments. Furthermore, nanoparticle carriers are also capable of addressing several drug delivery problems which could not be effectively solved in the past and include overcoming formulation issues, multi-drug-resistance phenomenon and penetrating cellular barriers that may limit device accessibility to intended targets such as the blood-brain-barrier. The challenges in optimizing design of nanoparticles tailored to specific tumor indications still remain; however, it is clear that nanoscale devices carry a significant promise towards new ways of diagnosing and treating cancer. This review focuses on future prospects of using nanotechnology in cancer applications and discusses practices and methodologies used in the development and translation of nanotechnology-based therapeutics. PMID:22669131

Anticipatory Standards and the Commercialization of Nanotechnology

International Nuclear Information System (INIS)

Rashba, Edward; Gamota, Daniel

2003-01-01

Standardization will play an increasing role in creating a smooth transition from the laboratory to the marketplace as products based on nanotechnology are developed and move into broad use. Traditionally, standards have evolved out of a need to achieve interoperability among existing products, create order in markets, simplify production and ensure safety. This view does not account for the escalating trend in standardization, especially in emerging technology sectors, in which standards working groups anticipate the evolution of a technology and facilitate its rapid development and entree to the market place. It is important that the nanotechnology community views standards as a vital tool to promote progress along the nanotechnology value chain - from nanoscale materials that form the building blocks for components and devices to the integration of these devices into functional systems.This paper describes the need for and benefits derived from developing consensus standards in nanotechnology, and how standards are created. Anticipatory standards can nurture the growth of nanotechnology by drawing on the lessons learned from a standards effort that has and continues to revolutionize the telecommunications industry. Also, a brief review is presented on current efforts in the US to create nanotechnology standards

Glucose-based Biofuel Cells: Nanotechnology as a Vital Science in Biofuel Cells Performance

Directory of Open Access Journals (Sweden)

Hamideh Aghahosseini

2016-07-01

Full Text Available Nanotechnology has opened up new opportunities for the design of nanoscale electronic devices suitable for developing high-performance biofuel cells. Glucose-based biofuel cells as green energy sources can be a powerful tool in the service of small-scale power source technology as it provides a latent potential to supply power for various implantable medical electronic devices. By using physiologically produced glucose as a fuel, the living battery can recharge for continuous production of electricity. This review article presents how nanoscience, engineering and medicine are combined to assist in the development of renewable glucose-based biofuel cell systems. Here, we review recent advances and applications in both abiotic and enzymatic glucose biofuel cells with emphasis on their “implantable” and “implanted” types. Also the challenges facing the design and application of glucose-based biofuel cells to convert them to promising replacement candidates for non-rechargeable lithium-ion batteries are discussed. Nanotechnology could make glucose-based biofuel cells cheaper, lighter and more efficient and hence it can be a part of the solutions to these challenges.

The Nanotechnology R(evolution)

OpenAIRE

Tahan, Charles

2006-01-01

Nanotechnology as a social concept and investment focal point has drawn much attention. Here we consider the place of nanotechnology in the second great technological revolution of mankind that began some 200 years ago. The so-called nanotechnology revolution represents both a continuation of prior science and technology trends and a re-awakening to the benefits of significant investment in fundamental research. We consider the role the military might play in the development of nanotechnology...

Nanotechnology in bone tissue engineering.

Science.gov (United States)

Walmsley, Graham G; McArdle, Adrian; Tevlin, Ruth; Momeni, Arash; Atashroo, David; Hu, Michael S; Feroze, Abdullah H; Wong, Victor W; Lorenz, Peter H; Longaker, Michael T; Wan, Derrick C

2015-07-01

Nanotechnology represents a major frontier with potential to significantly advance the field of bone tissue engineering. Current limitations in regenerative strategies include impaired cellular proliferation and differentiation, insufficient mechanical strength of scaffolds, and inadequate production of extrinsic factors necessary for efficient osteogenesis. Here we review several major areas of research in nanotechnology with potential implications in bone regeneration: 1) nanoparticle-based methods for delivery of bioactive molecules, growth factors, and genetic material, 2) nanoparticle-mediated cell labeling and targeting, and 3) nano-based scaffold construction and modification to enhance physicochemical interactions, biocompatibility, mechanical stability, and cellular attachment/survival. As these technologies continue to evolve, ultimate translation to the clinical environment may allow for improved therapeutic outcomes in patients with large bone deficits and osteodegenerative diseases. Traditionally, the reconstruction of bony defects has relied on the use of bone grafts. With advances in nanotechnology, there has been significant development of synthetic biomaterials. In this article, the authors provided a comprehensive review on current research in nanoparticle-based therapies for bone tissue engineering, which should be useful reading for clinicians as well as researchers in this field. Copyright © 2015 Elsevier Inc. All rights reserved.

Inequality gaps in nanotechnology development in Latin America

Directory of Open Access Journals (Sweden)

Guillermo Foladori

2013-06-01

Full Text Available Nanotechnology has been spurred by science, technology and innovation policies in most Latin American countries since the last decade. Public policies and funding have been accompanied by a common rhetoric, highlighting the potential of nanotechnology for increasing competitiveness and growth and providing the region with more efficient and innovative products. Based on an assessment of nanotechnology policies and capabilities in nine countries this article highlights three characteristics of nanotechnology in Latin America that might hinder its contribution to an equitable development within the region. The first characteristic is the conspicuous trend towards an intra-regional gap in capacity building as a result of the unequal historical development of science and technology among these countries and the large differences in equipment and financial resources devoted to nanotechnology.  The second characteristic is the strength of “international signals” vis-à-vis the national needs in the orientation of nanotechnology. On the one hand, nanotechnology is main and foremost oriented to achieve international competitiveness, which may lead its development to international market demands. On the other hand, nanotechnology research in Latin American countries has been configured within internationalized academic networks, which may influence local research agendas towards foreign research priorities. The third characteristic is the absence of research on potential impacts of nanotechnology on human health and the environment, as well as other societal implications, which may generate new forms of unequal distribution of benefits and risks.

Nanotechnology for sustainability: what does nanotechnology offer to address complex sustainability problems?

Energy Technology Data Exchange (ETDEWEB)

Wiek, Arnim, E-mail: arnim.wiek@asu.edu; Foley, Rider W. [Arizona State University, School of Sustainability (United States); Guston, David H. [Arizona State University, Center for Nanotechnology in Society, Consortium for Science, Policy and Outcomes (United States)

2012-09-15

Nanotechnology is widely associated with the promise of positively contributing to sustainability. However, this view often focuses on end-of-pipe applications, for instance, for water purification or energy efficiency, and relies on a narrow concept of sustainability. Approaching sustainability problems and solution options from a comprehensive and systemic perspective instead may yield quite different conclusions about the contribution of nanotechnology to sustainability. This study conceptualizes sustainability problems as complex constellations with several potential intervention points and amenable to different solution options. The study presents results from interdisciplinary workshops and literature reviews that appraise the contribution of the selected nanotechnologies to mitigate such problems. The study focuses exemplarily on the urban context to make the appraisals tangible and relevant. The solution potential of nanotechnology is explored not only for well-known urban sustainability problems such as water contamination and energy use but also for less obvious ones such as childhood obesity. Results indicate not only potentials but also limitations of nanotechnology's contribution to sustainability and can inform anticipatory governance of nanotechnology in general, and in the urban context in particular.

Nanotechnology Applications in Functional Foods; Opportunities and Challenges.

Science.gov (United States)

Singh, Harjinder

2016-03-01

Increasing knowledge on the link between diet and human health has generated a lot of interest in the development of functional foods. However, several challenges, including discovering of beneficial compounds, establishing optimal intake levels, and developing adequate food delivering matrix and product formulations, need to be addressed. A number of new processes and materials derived from nanotechnology have the potential to provide new solutions in many of these fronts. Nanotechnology is concerned with the manipulation of materials at the atomic and molecular scales to create structures that are less than 100 nm in size in one dimension. By carefully choosing the molecular components, it seems possible to design particles with different surface properties. Several food-based nanodelivery vehicles, such as protein-polysaccharide coacervates, multiple emulsions, liposomes and cochleates have been developed on a laboratory scale, but there have been very limited applications in real food systems. There are also public concerns about potential negative effects of nanotechnology-based delivery systems on human health. This paper provides an overview of the new opportunities and challenges for nanotechnology-based systems in future functional food development.

NANOTECHNOLOGY, NANOMEDICINE; ETHICAL ASPECTS

OpenAIRE

G?K?AY, Banu; ARDA, Berna

2015-01-01

Nanotechnology is a field that we often hear of its name nowadays. Altough what we know about it is soo poor, we admire this field of technlogy, moreover some societies even argues that nanotechnology will cause second endustrial revolution. In addition, nanotechnology makes our basic scientific knowledge upside down and is soo powerfull that it is potent in nearly every scientific field. Thereby, it is imposible to say that nanotechnology; which is soo effective on human and human life; will...

Machine Phase Fullerene Nanotechnology: 1996

Science.gov (United States)

Globus, Al; Chancellor, Marisa K. (Technical Monitor)

1997-01-01

NASA has used exotic materials for spacecraft and experimental aircraft to good effect for many decades. In spite of many advances, transportation to space still costs about $10,000 per pound. Drexler has proposed a hypothetical nanotechnology based on diamond and investigated the properties of such molecular systems. These studies and others suggest enormous potential for aerospace systems. Unfortunately, methods to realize diamonoid nanotechnology are at best highly speculative. Recent computational efforts at NASA Ames Research Center and computation and experiment elsewhere suggest that a nanotechnology of machine phase functionalized fullerenes may be synthetically relatively accessible and of great aerospace interest. Machine phase materials are (hypothetical) materials consisting entirely or in large part of microscopic machines. In a sense, most living matter fits this definition. To begin investigation of fullerene nanotechnology, we used molecular dynamics to study the properties of carbon nanotube based gears and gear/shaft configurations. Experiments on C60 and quantum calculations suggest that benzyne may react with carbon nanotubes to form gear teeth. Han has computationally demonstrated that molecular gears fashioned from (14,0) single-walled carbon nanotubes and benzyne teeth should operate well at 50-100 gigahertz. Results suggest that rotation can be converted to rotating or linear motion, and linear motion may be converted into rotation. Preliminary results suggest that these mechanical systems can be cooled by a helium atmosphere. Furthermore, Deepak has successfully simulated using helical electric fields generated by a laser to power fullerene gears once a positive and negative charge have been added to form a dipole. Even with mechanical motion, cooling, and power; creating a viable nanotechnology requires support structures, computer control, a system architecture, a variety of components, and some approach to manufacture. Additional

Public Attitudes Toward Nanotechnology

International Nuclear Information System (INIS)

Sims Bainbridge, William

2002-01-01

Data from 3909 respondents to an Internet survey questionnaire provide the first insights into public perceptions of nanotechnology. Quantitative analysis of statistics about agreement and disagreement with two statements, one positive and the other negative, reveals high levels of enthusiasm for the potential benefits of nanotechnology and little concern about possible dangers. The respondents mentally connect nanotechnology with the space program, nuclear power, and cloning research, but rate it more favorably. In contrast, they do not associate nanotechnology with pseudoscience, despite its imaginative exploitation by science fiction writers. Qualitative analysis of written comments from 598 respondents indicates that many ideas about the value of nanotechnology have entered popular culture, and it provides material for an additional 108 questionnaire items that can be used in future surveys on the topic. The findings of this exploratory study can serve as benchmarks against which to compare results of future research on the evolving status of nanotechnology in society

National nanotechnology partnership to protect workers

Science.gov (United States)

Howard, John; Murashov, Vladimir

2009-10-01

Nanotechnology is predicted to improve many aspects of human life. By 2015, it is estimated to represent 3.1 trillion in manufactured goods. Data is emerging that exposure to nanomaterials may pose a health risk to workers. If the economic promise of nanotechnology is to be achieved, ways need to be found to protect nanotechnology workers now. The Occupational Safety and Health Act of 1970 (OSHAct) gave the responsibility to protect workers to the Occupational Safety and Health Administration (OSHA) and the National Institute for Occupational Safety and Health (NIOSH) through research, standards adoption, and standards enforcement. Since 1980, adopting new occupational health standards has grown more complex. The increased complexity has greatly slowed efforts to adopt protective standards for toxic agents that are well-known to pose significant risks. The likelihood of rapidly adopting standards to protect workers from nanomaterials, whose risks are just emerging, seems even more unlikely. Use of the OSHAct's general duty clause to protect workers also seems uncertain at this time. In the interim, a national partnership led by NIOSH involving nanotech manufacturers and downstream users, workers, academic researchers, safety, and health practitioners is proposed. A National Nanotechnology Partnership would generate knowledge about the nature and the extent of worker risk, utilize that knowledge to develop risk control strategies to protect nanotechnology workers now, and provide an evidence base for NIOSH recommendations to OSHA for a nanotechnology program standard at a future date.

Surface electrical properties of stainless steel fibres: An AFM-based study

International Nuclear Information System (INIS)

Yin, Jun; D’Haese, Cécile; Nysten, Bernard

2015-01-01

Highlights: • Surface electrical conductivity of stainless steel fibre is measured and mapped by CS-AFM. • Surface potential of stainless steel fibre is measured and mapped by KPFM. • Surface electronic properties are governed by the chromium oxide passivation layer. • Electron tunnelling through the passivation layer is the dominant mechanisms for conduction. - Abstract: Atomic force microscopy (AFM) electrical modes were used to study the surface electrical properties of stainless steel fibres. The surface electrical conductivity was studied by current sensing AFM and I–V spectroscopy. Kelvin probe force microscopy was used to measure the surface contact potential. The oxide film, known as passivation layer, covering the fibre surface gives rise to the observation of an apparently semiconducting behaviour. The passivation layer generally exhibits a p-type semiconducting behaviour, which is attributed to the predominant formation of chromium oxide on the surface of the stainless steel fibres. At the nanoscale, different behaviours are observed from points to points, which may be attributed to local variations of the chemical composition and/or thickness of the passivation layer. I–V curves are well fitted with an electron tunnelling model, indicating that electron tunnelling may be the predominant mechanism for electron transport

Nanotechnology: Future of Oncotherapy.

Science.gov (United States)

Gharpure, Kshipra M; Wu, Sherry Y; Li, Chun; Lopez-Berestein, Gabriel; Sood, Anil K

2015-07-15

Recent advances in nanotechnology have established its importance in several areas including medicine. The myriad of applications in oncology range from detection and diagnosis to drug delivery and treatment. Although nanotechnology has attracted a lot of attention, the practical application of nanotechnology to clinical cancer care is still in its infancy. This review summarizes the role that nanotechnology has played in improving cancer therapy, its potential for affecting all aspects of cancer care, and the challenges that must be overcome to realize its full promise. ©2015 American Association for Cancer Research.

Nanotechnology-based polymeric bio(muco)adhesive platforms for controlling drug delivery - properties, methodologies and applications

International Nuclear Information System (INIS)

Carvalho, Flavia Chiva; Chorilli, Marlus; Gremiao, Maria Palmira Daflon

2014-01-01

Studies using bio(muco)adhesive drug delivery systems have recently gained great interest, which can promote drug targeting and more specific contact of the drug delivery system with the various absorptive membranes of the body. This technological platform associated with nanotechnology offers potential for controlling drug delivery; therefore, they are excellent strategies to increase the bioavailability of drugs. The objective of this work was to study nanotechnology-based polymeric bio(muco)adhesive platforms for controlling drug delivery, highlighting their properties, how the bio(muco)adhesion can be measured and their potential applications for different routes of administration. (author)

Characterisation of tissue factor-bearing extracellular vesicles with AFM: comparison of air-tapping-mode AFM and liquid Peak Force AFM

Directory of Open Access Journals (Sweden)

Julie Hardij

2013-08-01

Full Text Available Introduction: Extracellular vesicles (EVs are shed from cells and carry markers of the parent cells. Vesicles derived from cancer cells reach the bloodstream and locally influence important physiological processes. It has been previously shown that procoagulant vesicles are circulating in patients’ fluids. These EVs are therefore considered as promising biomarkers for the thrombotic risk. Because of their small size, classical methods such as flow cytometry suffer from limitation for their characterisation. Atomic force microscopy (AFM has been proposed as a promising complementary method for the characterisation of EVs. Objectives: The objectives of this study are: (a to develop and validate AFM with specific antibodies (anti-TF and (b to compare air and liquid modes for EVs’ size and number determination as potential biomarkers of the prothrombotic risk. Methods: AFM multimode nanoscope III was used for air tapping mode (TM. AFM catalyst was used for liquid Peak Force Tapping (PFT mode. Vesicles are generated according to Davila et al.'s protocol. Substrates are coated with various concentrations of antibodies, thanks to ethanolamine and glutaraldehyde. Results: Vesicles were immobilised on antibody-coated surfaces to select tissue factor (TF-positive vesicles. The size range of vesicles observed in liquid PFT mode is 6–10 times higher than in air mode. This corresponds to the data found in the literature. Conclusion: We recommend liquid PFT mode to analyse vesicles on 5 µg/ml antibody-coated substrates.

Ultra-large scale AFM of lipid droplet arrays: investigating the ink transfer volume in dip pen nanolithography

International Nuclear Information System (INIS)

Förste, Alexander; Pfirrmann, Marco; Sachs, Johannes; Gröger, Roland; Walheim, Stefan; Brinkmann, Falko; Hirtz, Michael; Fuchs, Harald; Schimmel, Thomas

2015-01-01

There are only few quantitative studies commenting on the writing process in dip-pen nanolithography with lipids. Lipids are important carrier ink molecules for the delivery of bio-functional patters in bio-nanotechnology. In order to better understand and control the writing process, more information on the transfer of lipid material from the tip to the substrate is needed. The dependence of the transferred ink volume on the dwell time of the tip on the substrate was investigated by topography measurements with an atomic force microscope (AFM) that is characterized by an ultra-large scan range of 800 × 800 μm 2 . For this purpose arrays of dots of the phospholipid1,2-dioleoyl-sn-glycero-3-phosphocholine were written onto planar glass substrates and the resulting pattern was imaged by large scan area AFM. Two writing regimes were identified, characterized of either a steady decline or a constant ink volume transfer per dot feature. For the steady state ink transfer, a linear relationship between the dwell time and the dot volume was determined, which is characterized by a flow rate of about 16 femtoliters per second. A dependence of the ink transport from the length of pauses before and in between writing the structures was observed and should be taken into account during pattern design when aiming at best writing homogeneity. The ultra-large scan range of the utilized AFM allowed for a simultaneous study of the entire preparation area of almost 1 mm 2 , yielding good statistic results. (paper)

Ultra-large scale AFM of lipid droplet arrays: investigating the ink transfer volume in dip pen nanolithography

Science.gov (United States)

Förste, Alexander; Pfirrmann, Marco; Sachs, Johannes; Gröger, Roland; Walheim, Stefan; Brinkmann, Falko; Hirtz, Michael; Fuchs, Harald; Schimmel, Thomas

2015-05-01

There are only few quantitative studies commenting on the writing process in dip-pen nanolithography with lipids. Lipids are important carrier ink molecules for the delivery of bio-functional patters in bio-nanotechnology. In order to better understand and control the writing process, more information on the transfer of lipid material from the tip to the substrate is needed. The dependence of the transferred ink volume on the dwell time of the tip on the substrate was investigated by topography measurements with an atomic force microscope (AFM) that is characterized by an ultra-large scan range of 800 × 800 μm2. For this purpose arrays of dots of the phospholipid1,2-dioleoyl-sn-glycero-3-phosphocholine were written onto planar glass substrates and the resulting pattern was imaged by large scan area AFM. Two writing regimes were identified, characterized of either a steady decline or a constant ink volume transfer per dot feature. For the steady state ink transfer, a linear relationship between the dwell time and the dot volume was determined, which is characterized by a flow rate of about 16 femtoliters per second. A dependence of the ink transport from the length of pauses before and in between writing the structures was observed and should be taken into account during pattern design when aiming at best writing homogeneity. The ultra-large scan range of the utilized AFM allowed for a simultaneous study of the entire preparation area of almost 1 mm2, yielding good statistic results.

AFM annual report 1983 (Petroleum Industry). [Export Federation for Mineral Oil, Federal Republic of Germany]. AFM Jahresbericht 1983

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

The annual report 1983 of the Export Federation for Mineral Oil (AFM) contains informations about the mineral oil economics, the market development for selected main products and the environmental protection. The AFM terms (standard conditions for barge transactions) for the mineral oil industry are given. The AFM Oil Market Report Daily has extended the frame of its reports in 1983.

[Development of a Futuristic Microneedle Based on Nanotechnology].

Science.gov (United States)

Tsuchiya, Kazuyoshi

2015-11-01

The author proposes "the microtube production technique", which is based on "nanotechnology", to produce a microneedle which mimicks a female mosquito's labium to collect blood almost painlessly. The microneedle production technique is to deposit the microneedle material on a rotating wire substrate at a speed of 3-5 rpm by a sputtering deposition method and etch the wire substrate by a chemical solution after a heat treatment As the result, a titanium microneedle was produced (outer and inner diameter: 50 μm and 25 μm) in the same size of female mosquito's labium. In this paper, microtube production technique is introduced first as a key technology. The design technique of painless microneedle for blood extraction system based on quantitative pain assessment, are also proposed to produce solid type microneedle with trenches on the surface of the needle.

Nanotechnology in paper electronics

Science.gov (United States)

Demming, Anna; Österbacka, Professor Ronald; Han, Jin-Woo, Dr

2014-03-01

devices. If 'writing is thinking on paper' [15], it seems researchers are finding yet more powerful means of putting their ideas on paper. References [1] Barquinha P, Martins R, Pereira L and Fortunato E 2012 Transparent Oxide Electronics: From Materials to Devices (Chichester: Wiley) [2] Zocco A T, You H, Hagen J A and Steckl A J 2014 Pentacene organic thin film transistors on flexible paper and glass substrates Nanotechnology 25 094005 [3] Pereira L, Gaspar D, Guerin D, Delattre A, Fortunato E and Martins R 2014 The influence of fibril composition and dimension on the performance of paper gated oxide transistors Nanotechnology 25 094007 [4] Wu G, Wan C, Zhou J, Zhu L and Wan Q 2014 Low-voltage protonic/electronic hybrid indium-zinc-oxide synaptic transistors on paper substrates Nanotechnology 25 094001 [5] Shin H, Yoon B, Park I S and Kim J-M 2014 An electrothermochromic paper display based on colorimetrically reversible polydiacetylenes Nanotechnology 25 094011 [6] Ihalainen P, Pettersson F, Pesonen M, Viitala T, Määttänen A, Österbacka R and Peltonen J 2014 An impedimetric study of DNA hybridization on paper supported inkjet-printed gold electrodes Nanotechnology 25 094009 [7] Wang Y, Shi Y, Zhao C X, Wong J I, Sun X W and Yang H Y 2014 Printed all-solid flexible microsupercapacitors: towards the general route for high energy storage device Nanotechnology 25 094010 [8] Andersson H A, Manuilskiy A, Haller S, Hummelgård M, Sidén J, Hummelgård C, Olin H and Nilsson H-E 2014 Assembling surface mounted components on ink-jet printed double sided paper circuit board Nanotechnology 25 094002 [9] Gaspar D, Fernandes S N, de Oliveira A G, Fernandes J G, Grey P, Pontes R V, Pereira L, Martins R, Godinho M H and Fortunato E 2014 Nanocrystalline cellulose applied simultaneously as gate dielectric and substrate on flexible field effect transistors Nanotechnology 25 094008 [10] Männl U, van den Berg C, Magunje B, Härting M, Britton D T, Jones S, Mvan Staden M J and Scriba M

Nanotechnology and nanomedicine: going small means aiming big.

Science.gov (United States)

Teli, Mahesh Kumar; Mutalik, Srinivas; Rajanikant, G K

2010-06-01

Nanotechnology is an emerging branch of science for designing tools and devices of size 1 to 100 nm with specific function at the cellular, atomic and molecular levels. The concept of employing nanotechnology in biomedical research and clinical practice is best known as nanomedicine. Nanomedicine is an upcoming field that could potentially make a major impact to human health. Nanomaterials are increasingly used in diagnostics, imaging and targeted drug delivery. Nanotechnology will assist the integration of diagnostics/imaging with therapeutics and facilitates the development of personalized medicine, i.e. prescription of specific medications best suited for an individual. This review provides an integrated overview of application of nanotechnology based molecular diagnostics and drug delivery in the development of nanomedicine and ultimately personalized medicine. Finally, we identify critical gaps in our knowledge of nanoparticle toxicity and how these gaps need to be evaluated to enable nanotechnology to transit safely from bench to bedside.

Direct manipulation of intracellular stress fibres using a hook-shaped AFM probe

International Nuclear Information System (INIS)

Machida, Shinichi; Watanabe-Nakayama, Takahiro; Harada, Ichiro; Afrin, Rehana; Nakayama, Tomonobu; Ikai, Atsushi

2010-01-01

Atomic force microscopy (AFM) is a highly successful technique for imaging nanometre-sized samples and measuring pico- to nano-newton forces acting between atoms and molecules. When it comes to the manipulation of larger samples with forces of tens and hundreds of nano-newtons, however, the present chemistry-based modification protocols for functionalizing AFM cantilevers to achieve the formation of covalent/non-covalent linkages between the AFM probe and the sample surface do not produce strong enough bonds. For the purpose of measuring the fracture strength and other mechanical properties of stress fibres (SFs) in living as well as semi-intact fibroblast cells, we fabricated an AFM probe with a hooking function by focused ion beam technology and used the AFM probe hook to capture, pull and eventually sever a chosen SF labelled with green or red fluorescent protein.

The analysis of the publications in the most active countries in nanotechnology

Directory of Open Access Journals (Sweden)

Joksimović Dušan

2014-01-01

Full Text Available Nanotechnology publications as one of the parameters of a country's level of nanotechnology (nanotech innovation, while nanotechnology innovations are considered the source of its competitive advantage. The country's competitiveness in the level of nanotechnology activity determine the total number of nanotechnology publications and the mean number of citations. In this paper, we have analyzed the scientific nanotechnology activity of the most active countries in this field (countries whose number of nanotechnology publications exceeds 1,000 annually. We used data on nanotechnology publications collected from Web of Science - WoS database and published by Nano Statistics - Nano Science, Technology and Industry Scoreboard. We analyzed the trend of the total number of published nanotechnology publications, the mean number of citations trend, trend of the relations of published nanotechnology publications and gross domestic product, and the trend of relations of published nanotechnology publications and the number of residents in the surveyed countries. Based on the regression-correlation analysis, we predicted the expected value of the total number of nanotechnology publications published in 2015 for China and the United States, because these are the countries that dominate in the total number of published nanotechnology publications in the world.

Nanotechnology in the management of cervical cancer.

Science.gov (United States)

Chen, Jiezhong; Gu, Wenyi; Yang, Lei; Chen, Chen; Shao, Renfu; Xu, Kewei; Xu, Zhi Ping

2015-03-01

Cervical cancer is a major disease with high mortality. All cervical cancers are caused by infection with human papillomaviruses (HPV). Although preventive vaccines for cervical cancer are successful, treatment of cervical cancer is far less satisfactory because of multidrug resistance and side effects. In this review, we summarize the recent application of nanotechnology to the diagnosis and treatment of cervical cancer as well as the development of HPV vaccines. Early detection of cervical cancer enables tumours to be efficiently removed by surgical procedures, leading to increased survival rate. The current method of detecting cervical cancer by Pap smear can only achieve 50% sensitivity, whereas nanotechnology has been used to detect HPVs with greatly improved sensitivity. In cervical cancer treatment, nanotechnology has been used for the delivery of anticancer drugs to increase treatment efficacy and decrease side effects. Nanodelivery of HPV preventive and therapeutic vaccines has also been investigated to increase vaccine efficacy. Overall, these developments suggest that nanoparticle-based vaccine may become the most effective way to prevent and treat cervical cancer, assisted or combined with some other nanotechnology-based therapy. Copyright © 2015 John Wiley & Sons, Ltd.

Commercialization of nanotechnology.

Science.gov (United States)

Hobson, David W

2009-01-01

The emerging and potential commercial applications of nanotechnologies clearly have great potential to significantly advance and even potentially revolutionize various aspects of medical practice and medical product development. Nanotechnology is already touching upon many aspects of medicine, including drug delivery, diagnostic imaging, clinical diagnostics, nanomedicines, and the use of nanomaterials in medical devices. This technology is already having an impact; many products are on the market and a growing number is in the pipeline. Momentum is steadily building for the successful development of additional nanotech products to diagnose and treat disease; the most active areas of product development are drug delivery and in vivo imaging. Nanotechnology is also addressing many unmet needs in the pharmaceutical industry, including the reformulation of drugs to improve their bioavailability or toxicity profiles. The advancement of medical nanotechnology is expected to advance over at least three different generations or phases, beginning with the introduction of simple nanoparticulate and nanostructural improvements to current product and process types, then eventually moving on to nanoproducts and nanodevices that are limited only by the imagination and limits of the technology itself. This review looks at some recent developments in the commercialization of nanotechnology for various medical applications as well as general trends in the industry, and explores the nanotechnology industry that is involved in developing medical products and procedures with a view toward technology commercialization. (c) 2009 John Wiley & Sons, Inc.

ACCELERATING NANO-TECHNOLOGICAL

DEFF Research Database (Denmark)

Jensen, Jens Stissing; Koch, Christian

2007-01-01

By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which concludes...... of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support “incubation rooms” or marked niches in order...

Single cell adhesion force measurement for cell viability identification using an AFM cantilever-based micro putter

Science.gov (United States)

Shen, Yajing; Nakajima, Masahiro; Kojima, Seiji; Homma, Michio; Kojima, Masaru; Fukuda, Toshio

2011-11-01

Fast and sensitive cell viability identification is a key point for single cell analysis. To address this issue, this paper reports a novel single cell viability identification method based on the measurement of single cell shear adhesion force using an atomic force microscopy (AFM) cantilever-based micro putter. Viable and nonviable yeast cells are prepared and put onto three kinds of substrate surfaces, i.e. tungsten probe, gold and ITO substrate surfaces. A micro putter is fabricated from the AFM cantilever by focused ion beam etching technique. The spring constant of the micro putter is calibrated using the nanomanipulation approach. The shear adhesion force between the single viable or nonviable cell and each substrate is measured using the micro putter based on the nanorobotic manipulation system inside an environmental scanning electron microscope. The adhesion force is calculated based on the deflection of the micro putter beam. The results show that the adhesion force of the viable cell to the substrate is much larger than that of the nonviable cell. This identification method is label free, fast, sensitive and can give quantitative results at the single cell level.

Public perception of nanotechnology

International Nuclear Information System (INIS)

Burri, Regula Valerie; Bellucci, Sergio

2008-01-01

While several studies on the public opinion of nanotechnology have pointed to a rather enthusiastic U.S. public, the public uptake of nanotechnology in Europe is more contained. The results of the Swiss publifocus on nanotechnology reveal a pragmatic attitude of citizens toward the emerging technologies, thus confirming what has been identified as a 'balanced approach' in the NanoJury UK

Nanotechnologies. Proceedings of Kharkiv Nanotechnology Congress-2008. Volume 1

International Nuclear Information System (INIS)

Neklyudov, I.M.; Shulaeva, V.M.

2008-01-01

The materials of Kharkiv Nanotechnology Congress-2008 held in Kharkiv of 26-30 May, 2008 are presented here. The scientific and practical research aspects as well as development of ion-plasma nanotechnologies, current problems of thin film physics in optics and electronics, as well as the issues of creation of new type of vacuum technological equipment are considered in papers to be published.

A longitudinal analysis of nanotechnology literature: 1976-2004

International Nuclear Information System (INIS)

Li Xin; Chen Hsinchun; Dang Yan; Lin Yiling; Larson, Catherine A.; Roco, Mihail C.

2008-01-01

Nanotechnology research and applications have experienced rapid growth in recent years. We assessed the status of nanotechnology research worldwide by applying bibliographic, content map, and citation network analysis to a data set of about 200,000 nanotechnology papers published in the Thomson Science Citation Index Expanded database (SCI) from 1976 to 2004. This longitudinal study shows a quasi-exponential growth of nanotechnology articles with an average annual growth rate of 20.7% after 1991. The United States had the largest contribution of nanotechnology research and China and Korea had the fastest growth rates. The largest institutional contributions were from the Chinese Academy of Sciences and the Russian Academy of Sciences. The high-impact papers generally described tools, theories, technologies, perspectives, and overviews of nanotechnology. From the top 20 institutions, based on the average number of paper citations in 1976-2004, 17 were in the Unites States, 2 in France and 1 in Germany. Content map analysis identified the evolution of the major topics researched from 1976 to 2004, including investigative tools, physical phenomena, and experiment environments. Both the country citation network and the institution citation network had relatively high clustering, indicating the existence of citation communities in the two networks, and specific patterns in forming citation communities. The United States, Germany, Japan, and China were major citation centers in nanotechnology research with close inter-citation relationships.

Effects of nanotechnologies-based devices on postural control in healthy subjects.

Science.gov (United States)

Malchiodi Albedi, Giovanna; Corna, Stefano; Aspesi, Valentina; Clerici, Daniela; Parisio, Cinzia; Seitanidis, Jonathan; Cau, Nicola; Brugliera, Luigia; Capodaglio, Paolo

2017-09-05

The aim of the present preliminary randomized controlled study was to ascertain whether the use of newly developed nanotechnologies-based patches can influence posture control of healthy subjects. Thirty healthy female subjects (age 39.4 years, BMI 22.74 kg/m2) were randomly assigned to two groups: one with active patches and a control group with sham patches. Two patches were applied with a tape: one on the subject's sternum and the other on the C7 apophysis. Body sway during quiet upright stance was recorded with a dynamometric platform. Each subject was tested under two visual conditions, eyes open and closed. We used a blocked stratified randomization procedure conducted by a third party. Subjects wearing the sham patches showed a significant increase of the centre of pressure sway area after 4 hours when they performed the habitual moderate-intensity work activities. In the active patch group, a decrease of the sway path was evident, providing evidence of an enhanced balance control. Our preliminary findings on healthy subjects indicate that nanotechnological devices generating ultra-low electromagnetic fields can improve posture control.

AFM measurements of novel solar cells. Studying electronic properties of Si-based radial junctions

Czech Academy of Sciences Publication Activity Database

Hývl, Matěj

-, č. 1 (2014), s. 52-53 ISSN 1439-4243 R&D Projects: GA ČR GA13-25747S; GA ČR GA13-12386S; GA MŠk(CZ) LM2011026 Institutional support: RVO:68378271 Keywords : AFM measurements * conductive cantilever * electronic properties * nanowires * PF TUNA Subject RIV: BM - Solid Matter Physics ; Magnetism http://www.imaging-git.com/science/scanning-probe-microscopy/afm-measurements-novel-solar- cells

Nanotechnology Review: Molecular Electronics to Molecular Motors

Science.gov (United States)

Srivastava, Deepak; Saini, Subhash (Technical Monitor)

1998-01-01

Reviewing the status of current approaches and future projections, as already published in scientific journals and books, the talk will summarize the direction in which computational and experimental nanotechnologies are progressing. Examples of nanotechnological approaches to the concepts of design and simulation of carbon nanotube based molecular electronic and mechanical devices will be presented. The concepts of nanotube based gears and motors will be discussed. The above is a non-technical review talk which covers long term precompetitive basic research in already published material that has been presented before many US scientific meeting audiences.

Modulating the immune system through nanotechnology.

Science.gov (United States)

Dacoba, Tamara G; Olivera, Ana; Torres, Dolores; Crecente-Campo, José; Alonso, María José

2017-12-01

Nowadays, nanotechnology-based modulation of the immune system is presented as a cutting-edge strategy, which may lead to significant improvements in the treatment of severe diseases. In particular, efforts have been focused on the development of nanotechnology-based vaccines, which could be used for immunization or generation of tolerance. In this review, we highlight how different immune responses can be elicited by tuning nanosystems properties. In addition, we discuss specific formulation approaches designed for the development of anti-infectious and anti-autoimmune vaccines, as well as those intended to prevent the formation of antibodies against biologicals. Copyright © 2017 Elsevier Ltd. All rights reserved.

Surface analysis with STM and AFM

CERN Document Server

Magonov, Sergi N

1996-01-01

Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) are powerful tools for surface examination. In the past, many STM and AFM studies led to erroneous conclusions due to lack of proper theoretical considerations and of an understanding of how image patterns are affected by measurement conditions. For this book, two world experts, one on theoretical analysis and the other on experimental characterization, have joined forces to bring together essential components of STM and AFM studies: The practical aspects of STM, the image simulation by surface electron density plot calculat

Impact of nanotechnology on drug delivery.

Science.gov (United States)

Farokhzad, Omid C; Langer, Robert

2009-01-27

Nanotechnology is the engineering and manufacturing of materials at the atomic and molecular scale. In its strictest definition from the National Nanotechnology Initiative, nanotechnology refers to structures roughly in the 1-100 nm size regime in at least one dimension. Despite this size restriction, nanotechnology commonly refers to structures that are up to several hundred nanometers in size and that are developed by top-down or bottom-up engineering of individual components. Herein, we focus on the application of nanotechnology to drug delivery and highlight several areas of opportunity where current and emerging nanotechnologies could enable entirely novel classes of therapeutics.

Sustainability evaluation of nanotechnology processing and production

OpenAIRE

Teresa M. Mata; Nídia de Sá Caetano; António A. Martins

2015-01-01

This article discusses the current situation and challenges posed by nanotechnology from a sustainability point of view. It presents an objective methodology to evaluate the sustainability of nanotechnology products, based on a life cycle thinking approach, a framework particularly suited to assess all current and future relevant economic, societal and environmental impacts products and processes. It is grounded on a hierarchical definition of indicators, starting from 3D indicators that take...

CONFERENCE NOTE: European Optical Society, Topical Meeting Optical Metrology and Nanotechnology, Engelberg, Switzerland, 27 30 March 1994

Science.gov (United States)

1993-01-01

This meeting, organized by the Paul Scherrer Institute's Department of Applied Solid State Physics, will be held from 27 30 March 1994 at the Hotel Regina-Titlis, Engelberg, Switzerland. The aim is to bring together scientists from two important fields of current research and increasing industrial relevance. Optical metrology is a traditional discipline of applied optics which reached the nanometre scale a long time ago. Nanotechnology is setting new limits and represents a major challenge to metrology, as well as offering new opportunities to optics. The meeting is intended to help define a common future for optical metrology and nanotechnology. Topics to be covered include: nanometre position control and measuring techniques ultrahigh precision interferometry scanning probe microscopy (AFM, SNOM, etc.) surface modification by scanning probe methods precision surface fabrication and characterization nanolithography micro-optics, diffractive optics components, including systems and applications subwavelength optical structures synthetic optical materials structures and technologies for X-ray optics. For further information please contact: Jens Gobrecht (Secretary), Paul Scherrer Institute, CH-5232 Villigen-PSI, Switzerland.Tel. (41)56992529; Fax (41) 5698 2635.

Nanotechnology for sustainability: what does nanotechnology offer to address complex sustainability problems?

International Nuclear Information System (INIS)

Wiek, Arnim; Foley, Rider W.; Guston, David H.

2012-01-01

Nanotechnology is widely associated with the promise of positively contributing to sustainability. However, this view often focuses on end-of-pipe applications, for instance, for water purification or energy efficiency, and relies on a narrow concept of sustainability. Approaching sustainability problems and solution options from a comprehensive and systemic perspective instead may yield quite different conclusions about the contribution of nanotechnology to sustainability. This study conceptualizes sustainability problems as complex constellations with several potential intervention points and amenable to different solution options. The study presents results from interdisciplinary workshops and literature reviews that appraise the contribution of the selected nanotechnologies to mitigate such problems. The study focuses exemplarily on the urban context to make the appraisals tangible and relevant. The solution potential of nanotechnology is explored not only for well-known urban sustainability problems such as water contamination and energy use but also for less obvious ones such as childhood obesity. Results indicate not only potentials but also limitations of nanotechnology’s contribution to sustainability and can inform anticipatory governance of nanotechnology in general, and in the urban context in particular.

A review of drug delivery systems based on nanotechnology and green chemistry: green nanomedicine.

Science.gov (United States)

Jahangirian, Hossein; Lemraski, Ensieh Ghasemian; Webster, Thomas J; Rafiee-Moghaddam, Roshanak; Abdollahi, Yadollah

2017-01-01

This review discusses the impact of green and environmentally safe chemistry on the field of nanotechnology-driven drug delivery in a new field termed "green nanomedicine". Studies have shown that among many examples of green nanotechnology-driven drug delivery systems, those receiving the greatest amount of attention include nanometal particles, polymers, and biological materials. Furthermore, green nanodrug delivery systems based on environmentally safe chemical reactions or using natural biomaterials (such as plant extracts and microorganisms) are now producing innovative materials revolutionizing the field. In this review, the use of green chemistry design, synthesis, and application principles and eco-friendly synthesis techniques with low side effects are discussed. The review ends with a description of key future efforts that must ensue for this field to continue to grow.

Nanotechnology in the 21st century

International Nuclear Information System (INIS)

Aguilar, Zoraida P.; Xu, Hengyi; Al Ogaidi, Israa; Wu, Nianqiang

2015-01-01

promises to bring the next wave of industrial production in various industries. Based on global market research, nanotechnology is expected to reach $1 trillion in 2015 according to the National Science Foundation in the USA. Nanotech is growing strong in the USA with the help of universities, startups and local government. This presentation will focus on various areas of nanotechnology that could benefit the academic, technology, and economic situation in the Philippines. The status of nanotechnology worldwide will be compared with that of the Philippines. (author)

Technical structure of the global nanoscience and nanotechnology literature

Energy Technology Data Exchange (ETDEWEB)

Kostoff, Ronald N., E-mail: kostofr@onr.navy.mil; Koytcheff, Raymond G. [Office of Naval Research (United States); Lau, Clifford G. Y. [Institute for Defense Analyses (United States)

2007-10-15

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The {approx}400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Technical structure of the global nanoscience and nanotechnology literature

International Nuclear Information System (INIS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-01-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ∼400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list

Nanotechnology: A Policy Primer

Science.gov (United States)

2013-06-24

savings in the United States of 24 million barrels of oil.4 • Universal access to clean water. Nanotechnology water desalination and filtration...CRS Report for Congress Prepared for Members and Committees of Congress Nanotechnology : A Policy Primer John F. Sargent Jr. Specialist...COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE Nanotechnology : A Policy Primer 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

Fabrication of cone-shaped boron doped diamond and gold nanoelectrodes for AFM-SECM

Energy Technology Data Exchange (ETDEWEB)

Avdic, A; Lugstein, A; Bertagnolli, E [Solid State Electronics Institute, Vienna University of Technology, Floragasse 7, 1040 Vienna (Austria); Wu, M; Gollas, B [Competence Centre for Electrochemical Surface Technology, Viktor Kaplan Strasse 2, 2700 Wiener Neustadt (Austria); Pobelov, I; Wandlowski, T [Department of Chemistry and Biochemistry, University of Bern, Freiestrasse 3, 3012 Bern (Switzerland); Leonhardt, K; Denuault, G, E-mail: alois.lugstein@tuwien.ac.at [School of Chemistry, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom)

2011-04-08

We demonstrate a reliable microfabrication process for a combined atomic force microscopy (AFM) and scanning electrochemical microscopy (SECM) measurement tool. Integrated cone-shaped sensors with boron doped diamond (BDD) or gold (Au) electrodes were fabricated from commercially available AFM probes. The sensor formation process is based on mature semiconductor processing techniques, including focused ion beam (FIB) machining, and highly selective reactive ion etching (RIE). The fabrication approach preserves the geometry of the original AFM tips resulting in well reproducible nanoscaled sensors. The feasibility and functionality of the fully featured tips are demonstrated by cyclic voltammetry, showing good agreement between the measured and calculated currents of the cone-shaped AFM-SECM electrodes.

Risk of nanotechnology

Science.gov (United States)

Louda, Petr; Bakalova, Totka

2014-05-01

in some instances can even cross the blood-brain barrier. How these nanoparticles behave inside the organism is one of the big issues that need to be resolved. Not enough data exists to know for sure if nanoparticles could have undesirable effects on the environment. Two areas are relevant here: (1) In a free form nanoparticles can be released in the air or water during production (or production accidents) or as waste byproduct of production, and ultimately accumulate in the soil, water or plant life. (2) In a fixed form, where they are part of a manufactured substance or product, they will ultimately have to be recycled or disposed of as waste. To properly assess the health hazards of engineered nanoparticles the whole life cycle of these particles needs to be evaluated, including their fabrication, storage and distribution, application and potential abuse, and disposal. The impact on humans or the environment may vary at different stages of the life cycle. Regulatory bodies in the U.S. as well as in the EU have concluded that nanoparticles form the potential for an entirely new risk and that it is necessary to carry out an extensive analysis of the risk. It is imperative that national and international regulatory bodies cooperate closely not only with each other, but also with academia and industry; based on that, nanomaterials and nanotechnology can be developed responsibly. With that in place we can look forward to optimizing the benefits of nanotechnology while minimizing and controlling the risks.

Food nanotechnology – an overview

Directory of Open Access Journals (Sweden)

Bhupinder S Sekhon

2010-05-01

Full Text Available Bhupinder S SekhonInstitute of Pharmacy and Department of Biotechnology, Punjab College of Technical Education, Jhande, Ludhiana, IndiaAbstract: Food nanotechnology is an area of emerging interest and opens up a whole universe of new possibilities for the food industry. The basic categories of nanotechnology applications and functionalities currently in the development of food packaging include: the improvement of plastic materials barriers, the incorporation of active components that can deliver functional attributes beyond those of conventional active packaging, and the sensing and signaling of relevant information. Nano food packaging materials may extend food life, improve food safety, alert consumers that food is contaminated or spoiled, repair tears in packaging, and even release preservatives to extend the life of the food in the package. Nanotechnology applications in the food industry can be utilized to detect bacteria in packaging, or produce stronger flavors and color quality, and safety by increasing the barrier properties. Nanotechnology holds great promise to provide benefits not just within food products but also around food products. In fact, nanotechnology introduces new chances for innovation in the food industry at immense speed, but uncertainty and health concerns are also emerging. EU/WE/global legislation for the regulation of nanotechnology in food are meager. Moreover, current legislation appears unsuitable to nanotechnology specificity.Keywords: nanotechnology, nanofood, food packaging, nanoparticles, nanoencapsulation

Noise in NC-AFM measurements with significant tip–sample interaction

Directory of Open Access Journals (Sweden)

Jannis Lübbe

2016-12-01

Full Text Available The frequency shift noise in non-contact atomic force microscopy (NC-AFM imaging and spectroscopy consists of thermal noise and detection system noise with an additional contribution from amplitude noise if there are significant tip–sample interactions. The total noise power spectral density DΔf(fm is, however, not just the sum of these noise contributions. Instead its magnitude and spectral characteristics are determined by the strongly non-linear tip–sample interaction, by the coupling between the amplitude and tip–sample distance control loops of the NC-AFM system as well as by the characteristics of the phase locked loop (PLL detector used for frequency demodulation. Here, we measure DΔf(fm for various NC-AFM parameter settings representing realistic measurement conditions and compare experimental data to simulations based on a model of the NC-AFM system that includes the tip–sample interaction. The good agreement between predicted and measured noise spectra confirms that the model covers the relevant noise contributions and interactions. Results yield a general understanding of noise generation and propagation in the NC-AFM and provide a quantitative prediction of noise for given experimental parameters. We derive strategies for noise-optimised imaging and spectroscopy and outline a full optimisation procedure for the instrumentation and control loops.

Nanobiosensors Based on Chemically Modified AFM Probes: A Useful Tool for Metsulfuron-Methyl Detection

Directory of Open Access Journals (Sweden)

Fabio L. Leite

2013-01-01

Full Text Available The use of agrochemicals has increased considerably in recent years, and consequently, there has been increased exposure of ecosystems and human populations to these highly toxic compounds. The study and development of methodologies to detect these substances with greater sensitivity has become extremely relevant. This article describes, for the first time, the use of atomic force spectroscopy (AFS in the detection of enzyme-inhibiting herbicides. A nanobiosensor based on an atomic force microscopy (AFM tip functionalised with the acetolactate synthase (ALS enzyme was developed and characterised. The herbicide metsulfuron-methyl, an ALS inhibitor, was successfully detected through the acquisition of force curves using this biosensor. The adhesion force values were considerably higher when the biosensor was used. An increase of ~250% was achieved relative to the adhesion force using an unfunctionalised AFM tip. This considerable increase was the result of a specific interaction between the enzyme and the herbicide, which was primarily responsible for the efficiency of the nanobiosensor. These results indicate that this methodology is promising for the detection of herbicides, pesticides, and other environmental contaminants.

Current situation and industrialization of Taiwan nanotechnology

International Nuclear Information System (INIS)

Su, H.-N.; Lee, P.-C.; Tsai, M.-H.; Chien, K.-M.

2007-01-01

Nanotechnology is projected to be a very promising field, and the impact of nanotechnology on society is increasingly significant as the research funding and manufactured goods increase exponentially. A clearer picture of Taiwan's current and future nanotechnology industry is an essential component for future planning. Therefore, this investigation studies the progress of industrializing nanotechnology in Taiwan by surveying 150 companies. Along with understanding Taiwan's current nanotechnology industrialization, this paper also suggests ways to promote Taiwan's nanotechnology. The survey results are summarized and serve as the basis for planning a nanotechnology industrialization strategy

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

International Nuclear Information System (INIS)

Gupta, Nidhi; Fischer, Arnout R. H.; Lans, Ivo A. van der; Frewer, Lynn J.

2012-01-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Science.gov (United States)

Gupta, Nidhi; Fischer, Arnout R. H.; van der Lans, Ivo A.; Frewer, Lynn J.

2012-05-01

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Nanotechnology and accounting issues

OpenAIRE

Abedalqader Rababah

2017-01-01

Nanotechnology is a new advanced technology used in the industry. This study conducted an investigation on the literature and highlighted the accounting issues which related to the implement of nanotechnology, especially the change of cost structure and expected solutions for the increasing of indirect costs which need more accurate allocation to the unit of products. Also, this study investigated on the future expected accounting risks for using nanotechnology. Finally, this study will open ...

Citizenship Education to Nanotechnologies: Teaching Knowledge About Nanotechnologies and Educating for Responsible Citizenship

Directory of Open Access Journals (Sweden)

Nathalie Panissal

2012-12-01

Full Text Available We present a research based on a project for citizenship education tonanotechnologies in a French high school which aims at teaching the specific characteristics of nanotechnologies, of their fields of application and of the controversies which are linked to them. At the junction of Socially Acute Questions didactics and of the cultural-historical Vygotskian theory, we analyze the knowledge at work in a debate on the promises and risks connected with nanotechnologies. The knowledge mobilized by the students (17- to 18 yearsold in their dialogical interactions can refer back to the archetypal narrativeswhose origin lies in men’s social and cultural history. Through the joint effect of cumulative talk and exploratory talk, the students co-construct the concepts linked to the Social Ethical Issues: risks and human enhancement. We show that the debate at school leads students to be able to construct reasoned opinion and to position themselves in their environment in a responsible way. This educational innovation appears to be relevant for combining the learning of academic and cultural contents with social competencies necessary for committed citizenship education in the field of nanotechnologies.

Societal implications of nanoscience and nanotechnology: Maximizinghuman benefit

International Nuclear Information System (INIS)

Roco, M. C.; Bainbridge, W.S.

2005-01-01

The balance between the potential benefits and risks of nanotechnology is discussed based on judgments expressed by leading industry, academe and government experts at a U.S. National Nanotechnology Initiative (NNI) sponsored meeting. The results are summarized in various themes related to: economic impacts and commercialization; social scenarios; technological convergence; quality of life; ethics and law; governance, public perceptions, and education

Nanotechnology and the environment: A European perspective

Directory of Open Access Journals (Sweden)

D.G. Rickerby et al

2007-01-01

Full Text Available The potential positive and negative effects of nanotechnology on the environment are discussed. Advances in nanotechnology may be able to provide more sensitive detection systems for air and water quality monitoring, allowing the simultaneous measurement of multiple parameters and real time response capability. Metal oxide nanocatalysts are being developed for the prevention of pollution due to industrial emissions and the photocatalytic properties of titanium dioxide nanoparticles can be exploited to create self-cleaning surfaces that reduce existing pollution. However, while nanotechnology might provide solutions for certain environmental problems, relatively little is known at present about the environmental impact of nanoparticles, though in some cases chemical composition, size and shape have been shown to contribute to toxicological effects. Nanotechnology can assist resource saving through the use of lightweight, high strength materials based on carbon nanotubes and metal oxide frameworks as hydrogen storage materials. Other energy related applications include nanostructured electrode materials for improving the performance of lithium ion batteries and nanoporous silicon and titanium dioxide in advanced photovoltaic cells. It is important to develop an efficient strategy for the recycling and recovery of nanomaterials and methods are needed to assess whether the potential benefits of nanotechnology outweigh the risks. Life cycle analysis will be a useful tool for assessing the true environmental impacts.

In situ EC-AFM study of the effect of nanocrystals on the passivation and pit initiation in an Al-based metallic glass

International Nuclear Information System (INIS)

Zhang, S.D.; Liu, Z.W.; Wang, Z.M.; Wang, J.Q.

2014-01-01

Highlights: • The nanoscale corrosion on Al-rich glass was characterised by in situ EC-AFM. • The nanocrystals were identified from amorphous matrix by tapping mode AFM. • The formation of corrosion products is associated with the galvanic coupling. • The nanocrystals changed the local structure and component of the passive film. - Abstract: The effect of nanocrystals on pit initiation in metallic glasses is an unresolved issue. The passive film formation and pit initiation in the Al–Ni–Ce metallic glass were investigated using in situ electrochemical atomic force microscope (EC-AFM). The α-Al nanophases were identified from the amorphous matrix based upon the phase imaging in the tapping mode AFM. In the early stage of the passive film formation, the corrosion products Al(OH) 3 formed on the α-Al nanoparticles due to the galvanic coupling. The corrosion products incorporated into the passive film changed the local structure and component of the passive film, lowering its stability

Emerging synergy between nanotechnology and implantable biosensors: a review.

Science.gov (United States)

Vaddiraju, Santhisagar; Tomazos, Ioannis; Burgess, Diane J; Jain, Faquir C; Papadimitrakopoulos, Fotios

2010-03-15

The development of implantable biosensors for continuous monitoring of metabolites is an area of sustained scientific and technological interests. On the other hand, nanotechnology, a discipline which deals with the properties of materials at the nanoscale, is developing as a potent tool to enhance the performance of these biosensors. This article reviews the current state of implantable biosensors, highlighting the synergy between nanotechnology and sensor performance. Emphasis is placed on the electrochemical method of detection in light of its widespread usage and substantial nanotechnology based improvements in various aspects of electrochemical biosensor performance. Finally, issues regarding toxicity and biocompatibility of nanomaterials, along with future prospects for the application of nanotechnology in implantable biosensors, are discussed. (c) 2009 Elsevier B.V. All rights reserved.

Nanotechnologies in Latvia: Commercialisation Aspect

Directory of Open Access Journals (Sweden)

Geipele I.

2014-12-01

Full Text Available The authors consider the possibilities to apply the nanotechnology products of manufacturing industries in Latvia for further commercialisation. The purpose of the research is to find out the preliminary criteria for the system of engineering economic indicators for multifunctional nanocoating technologies. The article provides new findings and calculations for the local nanotechnology market research characterising the development of nanotechnology industry. The authors outline a scope of issues as to low activities rankings in Latvia on application of locally produced nanotechnologies towards efficiency of the resource use for nanocoating technologies. For the first time in Latvia, the authors make the case study research and summarise the latest performance indicators of the Latvian companies operating in the nanotechnology industry.

Nanotechnology in Military Development

OpenAIRE

Andrus Pedai; Igor Astrov

2014-01-01

Nanotechnology is the new cyber, according to several major leaders in this field. Just as cyber is entrenched across global society now, nano is poised to be major capabilities enabler of the next decades. Expert members from the National Nanotechnology Initiative (in U.S.) representing government and science disciplines say nano has great significance for the military and the general public. It is predicted that after next 15 years nanotechnology will replace information technology as the m...

Circulating Tumor Cells: From Theory to Nanotechnology-Based Detection

Science.gov (United States)

Ming, Yue; Li, Yuanyuan; Xing, Haiyan; Luo, Minghe; Li, Ziwei; Chen, Jianhong; Mo, Jingxin; Shi, Sanjun

2017-01-01

Cancer stem cells with stem-cell properties are regarded as tumor initiating cells. Sharing stem-cell properties, circulating tumor cells (CTCs) are responsible for the development of metastasis, which significant affects CTC analysis in clinical practice. Due to their extremely low occurrence in blood, however, it is challenging to enumerate and analyze CTCs. Nanotechnology is able to address the problems of insufficient capture efficiency and low purity of CTCs owing to the unique structural and functional properties of nanomaterials, showing strong promise for CTC isolation and detection. In this review, we discuss the role of stem-like CTCs in metastases, provide insight into recent progress in CTC isolation and detection approaches using various nanoplatforms, and highlight the role of nanotechnology in the advancement of CTC research. PMID:28203204

Nanotechnology: Principles and Applications

Science.gov (United States)

Logothetidis, S.

Nanotechnology is one of the leading scientific fields today since it combines knowledge from the fields of Physics, Chemistry, Biology, Medicine, Informatics, and Engineering. It is an emerging technological field with great potential to lead in great breakthroughs that can be applied in real life. Novel nano- and biomaterials, and nanodevices are fabricated and controlled by nanotechnology tools and techniques, which investigate and tune the properties, responses, and functions of living and non-living matter, at sizes below 100 nm. The application and use of nanomaterials in electronic and mechanical devices, in optical and magnetic components, quantum computing, tissue engineering, and other biotechnologies, with smallest features, widths well below 100 nm, are the economically most important parts of the nanotechnology nowadays and presumably in the near future. The number of nanoproducts is rapidly growing since more and more nanoengineered materials are reaching the global market The continuous revolution in nanotechnology will result in the fabrication of nanomaterials with properties and functionalities which are going to have positive changes in the lives of our citizens, be it in health, environment, electronics or any other field. In the energy generation challenge where the conventional fuel resources cannot remain the dominant energy source, taking into account the increasing consumption demand and the CO2 emissions alternative renewable energy sources based on new technologies have to be promoted. Innovative solar cell technologies that utilize nanostructured materials and composite systems such as organic photovoltaics offer great technological potential due to their attractive properties such as the potential of large-scale and low-cost roll-to-roll manufacturing processes The advances in nanomaterials necessitate parallel progress of the nanometrology tools and techniques to characterize and manipulate nanostructures. Revolutionary new approaches

Imaging and size measurement of nanoparticles in aqueous medium by use of atomic force microscopy.

Science.gov (United States)

Takechi-Haraya, Yuki; Goda, Yukihiro; Sakai-Kato, Kumiko

2018-02-01

Size control of nanoparticles in nanotechnology-based drug products is crucial for their successful development, since the in vivo pharmacokinetics of nanoparticles are size-dependent. In this study, we evaluated the use of atomic force microscopy (AFM) for imaging and size measurement of nanoparticles in aqueous medium. The height sizes of rigid polystyrene nanoparticles and soft liposomes were measured by AFM and were compared with the hydrodynamic sizes measured by dynamic light scattering (DLS). The lipid compositions of the studied liposomes were similar to those of commercial products. AFM proved to be a viable method for obtaining images of both polystyrene nanoparticles and liposomes in aqueous medium. For the polystyrene nanoparticles, the average height size observed by AFM was similar to the average number-weighted diameter obtained by DLS, indicating the usefulness of AFM for measuring the sizes of nanoparticles in aqueous medium. For the liposomes, the height sizes obtained by AFM differed depending upon the procedures of immobilizing the liposomes onto a solid substrate. In addition, the resultant average height sizes of the liposomes were smaller than those obtained by DLS. This knowledge will help the correct use of AFM as a powerful tool for imaging and size measurement of nanotechnology-based drug products for clinical use.

EDITORIAL: Ensuring sustainability with green nanotechnology Ensuring sustainability with green nanotechnology

Science.gov (United States)

Wong, Stanislaus; Karn, Barbara

2012-07-01

Nanotechnology offers immense promise for developing new technologies that are more sustainable than current technologies. All major industrial sectors have felt nanotechnology's impact, mainly from the incorporation of nanomaterials into their products. For example, nanotechnology has improved the design and performance of products in areas as diverse as electronics, medicine and medical devices, food and agriculture, cosmetics, chemicals, materials, coatings, energy, as well as many others. Moreover, the revenues from nanotechnology-enabled products are not trivial. For instance, Lux Research maintains that commercial sales in both Europe and the USA will attain revenues of over 1 trillion from nano-enabled products by 2015. The manufacturing of the nanomaterials for these products uses many processes equivalent to chemical manufacturing processes. As a result, manufacturing nanomaterials can produce either harmful pollutants or adverse environmental impacts similar to those from chemical manufacturing. Unlike the chemical industry, however, those same processes are not ingrained in the manufacturing of nanomaterials, and the opportunity exists at the initial design stage to purposely account for and mitigate out potentially harmful environmental impacts. While prevention has not been a priority in current industries, it can become a main concern for the new and future industries that manufacture nanomaterials on a bulk commercial scale. This is where green nanotechnology comes in. Green nanotechnology involves deliberate efforts aimed at developing meaningful and reasonable protocols for generating products and their associated production processes in a benign fashion. The goal is a conscious minimization of risks associated with the products of nanoscience. The green products of nanotechnology are those that are used in either direct or indirect environmental applications. Direct environmental applications provide benefits such as monitoring using nano

Micro and nanotechnology for biological and biomedical applications.

Science.gov (United States)

Lim, Chwee Teck; Han, Jongyoon; Guck, Jochen; Espinosa, Horacio

2010-10-01

This special issue contains some of the current state-of-the-art development and use of micro and nanotechnological tools, devices and techniques for both biological and biomedical research and applications. These include nanoparticles for bioimaging and biosensing, optical and biophotonic techniques for probing diseases at the nanoscale, micro and nano-fabricated tools for elucidating molecular mechanisms of mechanotransduction in cell and molecular biology and cell separation microdevices and techniques for isolating and enriching targeted cells for disease detection and diagnosis. Although some of these works are still at the research stage, there is no doubt that some of the important outcomes will eventually see actual biomedical applications in the not too distant future.

Students´ Knowledge about Nanotechnology and the Importance to ...

African Journals Online (AJOL)

The primary objective of this study was to find out what students already know about nanotechnology in order to design a context based module with a nanotechnology background. Therefore a questionnaire was distributed to 116 German students in grade 11. Questions referred to the first thought of the students´ mind ...

AFM measurements on ferrous materials

Directory of Open Access Journals (Sweden)

Ros Yáñez, T.

2000-08-01

Full Text Available The Atomic Force Microscope (AFM has been successfully used for the characterisation of the surface topography of a very wide range of materials. The AFM is an interesting technique to study the surface of materials and specifically to study surface effects in steel, e.g. after polishing and/or after etching. This technique allows not only to study the topography of the samples, but it is also a useful tool to obtain structural details of surfaces and for the identification of different phases. In this paper, some applications are shown concerning the study of the microstructure of multiphase-steels.

El Microcopio de Fuerza Atómica (AFM es utilizado en la caracterización topográfica de una gran variedad de materiales. El AFM es una interesante técnica para el estudio de la superficie de los aceros, ya sea con ataque químico o no. Esta técnica es también una útil herramienta para obtener detalles estructurales en las superficies y en la identificación de fases. En este trabajo algunas de estas aplicaciones son mostradas en el estudio de la microestructura de aceros multifásicos.

Nanotechnology at KT

DEFF Research Database (Denmark)

Glarborg, Peter; Hassager, Ole; Jonsson, Gunnar Eigil

2002-01-01

The objective of this report is to provide the reader an overview of the research activities at the Department of Chemical Engineering in the area of "nanotechnology"......The objective of this report is to provide the reader an overview of the research activities at the Department of Chemical Engineering in the area of "nanotechnology"...

Concrete Nanoscience and Nanotechnology: Definitions and Applications

Science.gov (United States)

Garboczi, E. J.

There are many improvements needed in concrete, especially for use in renewal and expansion of the world’s infrastructure. Nanomodification can help solve many of these problems. However, concrete has been slow to catch on to the nanotechnology revolution. There are several reasons for this lag in the nanoscience and nanotechnology of concrete (NNC). First is the lack of a complete basic understanding of chemical and physical mechanisms and structure at the nanometer length scale. Another reason is the lack of a broad understanding of what nanomodification means to concrete, which is a liquid-solid composite. NNC ideas need to profit from, but not be bound by, experience with other materials. As an illustration of these ideas, a specific application will be given of using nano-size molecules in solution to affect the viscosity of the concrete pore solution so that ionic diffusion is slowed. A molecular-based understanding would help move this project towards true nanotechnology. A final section of this paper lists some possibly fruitful focus areas for the nanoscience and nanotechnology of concrete.

The National Nanotechnology Initiative: Second Assessment and Recommendations of the National Nanotechnology Advisory Panel

Science.gov (United States)

2008-04-01

Council on Bioethics . NNI member agencies and the National Nanotechnology Coordination Office (NNCO) also provided valuable information. The NNAP...societal aspects of nanotechnology. In consultation with the President’s Council on Bioethics , the panel concluded that at present, nanotechnology...biomarker. One is a magnetic particle probe that captures the target from complex media . The other is a gold nanoparticle probe that is specific to the

National Nanotechnology Initiative Strategic Plan

Science.gov (United States)

2011-02-01

Manufactured Nanomaterials, supported by NIST staff in important leadership roles and coordinated with other agencies through the Global Issues in...groups are Global Issues in Nanotechnology (GIN); Nanotechnology Environmental and Health Implications (NEHI); Nanomanufacturing, Industry Liaison...existing or new working groups in terms of focus, intended participation, and scope, as reflected in the groups’ charters. Global Issues in Nanotechnology

BOREAS AFM-11 Aircraft Flux Analysis Reports

Data.gov (United States)

National Aeronautics and Space Administration — Reports from the BOREAS AFM-11 team regarding quality control and sampling analysis of data collected by other AFM personnel using the Electra, LongEZ, and Twin...

The innovation policy of nanotechnology development and convergence for the new Korean government

Energy Technology Data Exchange (ETDEWEB)

Bae, Seoung Hun; Lim, Jung Sun; Shin, Kwang Min; Kim, Chang Woo; Kang, Sang Kyu [Korea Institute of Science and Technology Information, National Nanotechnology Policy Center (Korea, Republic of); Shin, Minsoo, E-mail: minsooshin@hanyang.ac.kr [Hanyang University, School of Business (Korea, Republic of)

2013-11-15

Since 2001, Korea has been establishing and executing policy for the development of nanotechnology in accordance with the National Comprehensive Development Plan of Nanotechnology (NCDPN) periods I, II, and III. NCDPN has been focused on innovation in wide spectrum of technology development, and NT-based convergence technologies are expected to contribute 35 % of the total GDP (about 5.02 billion won) with 1.2 million of job creation in KOREA at 2020. Establishment of new strategies for innovating and commercializing nanotechnology is an emerging global issue in major countries including the United States, Japan, Germany, and Korea, with particular concerns for safety in the implementations of nanotechnology (EHS). Under these circumstances, Korea needs to create a post-catch-up strategy beyond fast-follower approach, to compete effectively with nanotechnology-leading countries. This study analyzes the current status of Korean nanotechnology development and relevant policies, and suggests future policy directions for the new Korean government based on innovative competition theory.

The innovation policy of nanotechnology development and convergence for the new Korean government

International Nuclear Information System (INIS)

Bae, Seoung Hun; Lim, Jung Sun; Shin, Kwang Min; Kim, Chang Woo; Kang, Sang Kyu; Shin, Minsoo

2013-01-01

Since 2001, Korea has been establishing and executing policy for the development of nanotechnology in accordance with the National Comprehensive Development Plan of Nanotechnology (NCDPN) periods I, II, and III. NCDPN has been focused on innovation in wide spectrum of technology development, and NT-based convergence technologies are expected to contribute 35 % of the total GDP (about 5.02 billion won) with 1.2 million of job creation in KOREA at 2020. Establishment of new strategies for innovating and commercializing nanotechnology is an emerging global issue in major countries including the United States, Japan, Germany, and Korea, with particular concerns for safety in the implementations of nanotechnology (EHS). Under these circumstances, Korea needs to create a post-catch-up strategy beyond fast-follower approach, to compete effectively with nanotechnology-leading countries. This study analyzes the current status of Korean nanotechnology development and relevant policies, and suggests future policy directions for the new Korean government based on innovative competition theory

Strategic Workshops on Cancer Nanotechnology

Science.gov (United States)

Nagahara, Larry A.; Lee, Jerry S H.; Molnar, Linda K.; Panaro, Nicholas J.; Farrell, Dorothy; Ptak, Krzysztof; Alper, Joseph; Grodzinski, Piotr

2010-01-01

Nanotechnology offers the potential for new approaches to detecting, treating and preventing cancer. To determine the current status of the cancer nanotechnology field and the optimal path forward, the National Cancer Institute’s Alliance for Nanotechnology in Cancer held three strategic workshops, covering the areas of in-vitro diagnostics and prevention, therapy and post-treatment, and in-vivo diagnosis and imaging. At each of these meetings, a wide range of experts from academia, industry, the non-profit sector, and the Federal government discussed opportunities in the field of cancer nanotechnology and barriers to its implementation. PMID:20460532

Factors influencing societal response of nanotechnology: an expert stakeholder analysis

Energy Technology Data Exchange (ETDEWEB)

Gupta, Nidhi, E-mail: nidhi.gupta@wur.nl; Fischer, Arnout R. H., E-mail: arnout.fischer@wur.nl; Lans, Ivo A. van der, E-mail: Ivo.vanderLans@wur.nl [Wageningen University, Marketing and Consumer Behaviour Group (Netherlands); Frewer, Lynn J., E-mail: lynn.frewer@newcastle.ac.uk [Newcastle University, School of Agriculture, Food and Rural Development (United Kingdom)

2012-05-15

Nanotechnology can be described as an emerging technology and, as has been the case with other emerging technologies such as genetic modification, different socio-psychological factors will potentially influence societal responses to its development and application. These factors will play an important role in how nanotechnology is developed and commercialised. This article aims to identify expert opinion on factors influencing societal response to applications of nanotechnology. Structured interviews with experts on nanotechnology from North West Europe were conducted using repertory grid methodology in conjunction with generalized Procrustes analysis to examine the psychological constructs underlying societal uptake of 15 key applications of nanotechnology drawn from different areas (e.g. medicine, agriculture and environment, chemical, food, military, sports, and cosmetics). Based on expert judgement, the main factors influencing societal response to different applications of nanotechnology will be the extent to which applications are perceived to be beneficial, useful, and necessary, and how 'real' and physically close to the end-user these applications are perceived to be by the public.

Nanotechnology-based drug delivery systems for control of microbial biofilms: a review.

Science.gov (United States)

Dos Santos Ramos, Matheus Aparecido; Da Silva, Patrícia Bento; Spósito, Larissa; De Toledo, Luciani Gaspar; Bonifácio, Bruna Vidal; Rodero, Camila Fernanda; Dos Santos, Karen Cristina; Chorilli, Marlus; Bauab, Taís Maria

2018-01-01

Since the dawn of civilization, it has been understood that pathogenic microorganisms cause infectious conditions in humans, which at times, may prove fatal. Among the different virulent properties of microorganisms is their ability to form biofilms, which has been directly related to the development of chronic infections with increased disease severity. A problem in the elimination of such complex structures (biofilms) is resistance to the drugs that are currently used in clinical practice, and therefore, it becomes imperative to search for new compounds that have anti-biofilm activity. In this context, nanotechnology provides secure platforms for targeted delivery of drugs to treat numerous microbial infections that are caused by biofilms. Among the many applications of such nanotechnology-based drug delivery systems is their ability to enhance the bioactive potential of therapeutic agents. The present study reports the use of important nanoparticles, such as liposomes, microemulsions, cyclodextrins, solid lipid nanoparticles, polymeric nanoparticles, and metallic nanoparticles, in controlling microbial biofilms by targeted drug delivery. Such utilization of these nanosystems has led to a better understanding of their applications and their role in combating biofilms.

International Perspective on Government Nanotechnology Funding in 2005

International Nuclear Information System (INIS)

Roco, M. C.

2005-01-01

The worldwide investment in nanotechnology research and development (R and D) reported by national government organizations and EC has increased approximately 9-fold in the last 8 years - from $432 million in 1997 to about $4,100 million in 2005. The proportion of national government investments for: academic R and D and education are between 20% (Korea, Taiwan) and 65% (US), industrial R and D - between 5% (US) and 60% (Korea, Taiwan), and core facilities and government laboratories - about 20-25% in all major contributing economies. This evaluation uses the NNI definition of nanotechnology (that excludes MEMS or microelectronics), and is based on direct information and analysis with managers of nanotechnology R and D programs in the respective countries

International Perspective on Government Nanotechnology Funding in 2005

Science.gov (United States)

Roco, M. C.

2005-12-01

The worldwide investment in nanotechnology research and development (R&D) reported by national government organizations and EC has increased approximately 9-fold in the last 8 years - from 432 million in 1997 to about 4,100 million in 2005. The proportion of national government investments for: academic R&D and education are between 20% (Korea, Taiwan) and 65% (US), industrial R&D - between 5% (US) and 60% (Korea, Taiwan), and core facilities and government laboratories - about 20-25% in all major contributing economies. This evaluation uses the NNI definition of nanotechnology (that excludes MEMS or microelectronics), and is based on direct information and analysis with managers of nanotechnology R&D programs in the respective countries.

Nanotechnology Environmental and Health Implications (NEHI) | Nano

Science.gov (United States)

Skip main navigation Nano.gov Nanotechnology 101 What It Is and How It Works What is Nanotechnology What's So Special about the Nanoscale? NNI Accomplishments NNI Accomplishments Archive Nanotechnology Timeline Frequently Asked Questions Glossary Nanotechnology and You Benefits and Applications Networks and

Nanotechnology in cancer treatment

Science.gov (United States)

Mironidou-Tzouveleki, Maria; Imprialos, Konstantinos; Kintsakis, Athanasios

2011-10-01

The purpose of this paper is to analyze the current evolutions on nanotechnology and its applications on cancer theragnostics.Rapid advances and emerging technologies in nanotechnology are having a profound impact on cancer treatment. Applications of nanotechnology, which include liposomes, nanoparticles, polymeric micelles, dendrimers, nanocantilever, carbon nanotubes and quantum dots have significantly revolutionized cancer theragnostics. From a pharmaceutical viewpoint, it is critical that the biodistribution of active agents has to be controlled as much as possible. This aspect is vital in order to assure the proper efficiency and safety of the anticancer agents. These biocompatible nanocomposites provide specific biochemical interactions with receptors expressed on the surface of cancer cells. With passive or active targeting strategies, an increased intracellular concentration of drugs can be achieved in cancer cells , while normal cells are being protected from the drug simultaneously. Thus, nanotechnology restricts the extent of the adverse effects of the anticancer therapy. Treatment for metastatic breast cancer, sarcoma in AIDS patients, ovarian and lung cancer is already on market or under final phases of many clinical trials, showing remarkable results. As nanotechnology is perfected, side effects due to normal cell damage will decrease, leading to better results and lengthening patient's survival.

Emerging nanotechnology-based strategies for the identification of microbial pathogenesis.

Science.gov (United States)

Kaittanis, Charalambos; Santra, Santimukul; Perez, J Manuel

2010-03-18

Infectious diseases are still a major healthcare problem. From food intoxication and contaminated water, to hospital-acquired diseases and pandemics, infectious agents cause disease throughout the world. Despite advancements in pathogens' identification, some of the gold-standard diagnostic methods have limitations, including laborious sample preparation, bulky instrumentation and slow data readout. In addition, new field-deployable diagnostic modalities are urgently needed in first responder and point-of-care applications. Apart from compact, these sensors must be sensitive, specific, robust and fast, in order to facilitate detection of the pathogen even in remote rural areas. Considering these characteristics, researchers have utilized innovative approaches by employing the unique properties of nanomaterials in order to achieve detection of infectious agents, even in complex media like blood. From gold nanoparticles and their plasmonic shifts to iron oxide nanoparticles and changes in magnetic properties, detection of pathogens, toxins, antigens and nucleic acids has been achieved with impressive detection thresholds. Additionally, as bacteria become resistant to antibiotics, nanotechnology has achieved the rapid determination of bacterial drug susceptibility and resistance using novel methods, such as amperometry and magnetic relaxation. Overall, these promising results hint to the adoption of nanotechnology-based diagnostics for the diagnosis of infectious diseases in diverse settings throughout the globe, preventing epidemics and safeguarding human and economic wellness. Copyright 2009 Elsevier B.V. All rights reserved.

Expert judgment based multi-criteria decision model to address uncertainties in risk assessment of nanotechnology-enabled food products

International Nuclear Information System (INIS)

Flari, Villie; Chaudhry, Qasim; Neslo, Rabin; Cooke, Roger

2011-01-01

Currently, risk assessment of nanotechnology-enabled food products is considered difficult due to the large number of uncertainties involved. We developed an approach which could address some of the main uncertainties through the use of expert judgment. Our approach employs a multi-criteria decision model, based on probabilistic inversion that enables capturing experts’ preferences in regard to safety of nanotechnology-enabled food products, and identifying their opinions in regard to the significance of key criteria that are important in determining the safety of such products. An advantage of these sample-based techniques is that they provide out-of-sample validation and therefore a robust scientific basis. This validation in turn adds predictive power to the model developed. We achieved out-of-sample validation in two ways: (1) a portion of the expert preference data was excluded from the model’s fitting and was then predicted by the model fitted on the remaining rankings and (2) a (partially) different set of experts generated new scenarios, using the same criteria employed in the model, and ranked them; their ranks were compared with ranks predicted by the model. The degree of validation in each method was less than perfect but reasonably substantial. The validated model we applied captured and modelled experts’ preferences regarding safety of hypothetical nanotechnology-enabled food products. It appears therefore that such an approach can provide a promising route to explore further for assessing the risk of nanotechnology-enabled food products.

Nanotechnologies for sustainable construction

DEFF Research Database (Denmark)

Geiker, Mette Rica; Andersen, Maj Munch

2009-01-01

This chapter aims to highlight key aspects and recent trends in the development and application of nanotechnology to facilitate sustainable construction, use and demolition of buildings and infrastructure structures, ‘nanoconstruction’. Nanotechnology is not a technology but a very diverse...

Potential of Nanotechnology based water treatment solutions for the improvement of drinking water supplies in developing countries

Science.gov (United States)

Dutta, Joydeep; Bhattacharya, Prosun; Bundschuh, Jochen

2016-04-01

Over the last decades explosive population growth in the world has led to water scarcity across the globe putting additional pressure already scarce ground water resources and is pushing scientists and researchers to come up with new alternatives to monitor and treat water for use by mankind and for food security. Nearly 4 billion people around the world are known to lack access to clean water supply. Systematic water quality data is important for the assessment of health risks as well as for developing appropriate and affordable technologies for waste and drinking water treatments, and long-term decision making policy against water quality management. Traditional water treatment technologies are generally chemical-intensive processes requiring extremely large infrastructural support thus limiting their effective applications in developing nations which creates an artificial barrier to the application of technological solutions for the provision of clean water. Nanotechnology-based systems are in retrospect, smaller, energy and resource efficient. Economic impact assessment of the implementation of nanotechnology in water treatment and studies on cost-effectiveness and environmental and social impacts is of key importance prior to its wide spread acceptance. Government agencies and inter-governmental bodies driving research and development activities need to measure the effective potential of nanotechnology as a solution to global water challenges in order to effectively engage in fiscal, economic and social issues at national and international levels for different types of source waters with new national and international initiatives on nanotechnology and water need to be launched. Environmental pollution and industrialization in global scale is further leading to pollution of available water sources and thus hygienically friendly purification technologies are the need of the hour. Thus cost-effective treatment of pollutants for the transformation of hazardous

The long view of nanotechnology development: the National Nanotechnology Initiative at 10 years

International Nuclear Information System (INIS)

Roco, Mihail C.

2011-01-01

A global scientific and societal endeavor was set in motion by the nanotechnology vision formulated in 1999 that inspired the National Nanotechnology Initiative (NNI) and other national and international R and D programs. Establishing foundational knowledge at the nanoscale has been the main focus of the nanotechnology research community in the first decade. As of 2009, this new knowledge underpinned about a quarter of a trillion dollars worldwide market, of which about $91 billion was in US products that incorporate nanoscale components. Nanotechnology is already evolving toward becoming a general-purpose technology by 2020, encompassing four generations of products with increasing structural and dynamic complexity: (1) passive nanostructures, (2) active nanostructures, (3) nanosystems, and (4) molecular nanosystems. By 2020, the increasing integration of nanoscale science and engineering knowledge and of nanosystems promises mass applications of nanotechnology in industry, medicine, and computing, and in better comprehension and conservation of nature. Nanotechnology’s rapid development worldwide is a testimony to the transformative power of identifying a concept or trend and laying out a vision at the synergistic confluence of diverse scientific research areas. This chapter provides a brief perspective on the development of the NNI since 2000 in the international context, the main outcomes of the R and D programs after 10 years, the governance aspects specific to this emerging field, lessons learned, and most importantly, how the nanotechnology community should prepare for the future.

AFM cantilever with in situ renewable mercury microelectrode

NARCIS (Netherlands)

Schön, Peter Manfred; Geerlings, J.; Tas, Niels Roelof; Sarajlic, Edin

2013-01-01

We report here first results obtained on a novel, in situ renewable mercury microelectrode integrated into an atomic force microscopy (AFM) cantilever. Our approach is based on a fountain pen probe with appropriate dimensions enabling reversible filling with(nonwetting) mercury under changing the

An Undergraduate Nanotechnology Engineering Laboratory Course on Atomic Force Microscopy

Science.gov (United States)

Russo, D.; Fagan, R. D.; Hesjedal, T.

2011-01-01

The University of Waterloo, Waterloo, ON, Canada, is home to North America's first undergraduate program in nanotechnology. As part of the Nanotechnology Engineering degree program, a scanning probe microscopy (SPM)-based laboratory has been developed for students in their fourth year. The one-term laboratory course "Nanoprobing and…

Nanotechnology and Life Cycle Assessment. A systems approach to Nanotechnology and the environment

DEFF Research Database (Denmark)

Klöpffer, Walter; Curran, Mary Ann; Frankl, Paolo

This report summarizes the results of “Nanotechnology and Life Cycle Assessment,” a twoday workshop jointly convened by the Woodrow Wilson Center Project on Emerging Nanotechnologies; the United States Environmental Protection Agency Office of Research and Development; and the European Commission......, RTD.G4 “Nano S&T: Converging Science and Technologies.” Held in October 2006, the workshop involved international experts from the fields of Life Cycle Assessment (LCA) and nanotechnology. The main program of the workshop consisted of introductory lectures, group discussions and a final plenary...... identified and discussed by the groups. The purpose of the workshop was to determine whether existing LCA tools and methods are adequate to use on a new technology. This document provides an overview of LCA and nanotechnology, discusses the current state of the art, identifies current knowledge gaps that may...

Nanotechnology between the lab and the shop floor: what are the effects on labor?

Energy Technology Data Exchange (ETDEWEB)

Invernizzi, Noela, E-mail: noela.invernizzi@gmail.com [Woodrow Wilson International Center for Scholars, Science and Technology Innovation Program (United States)

2011-06-15

Nanotechnology's effects on labor and employment have received little attention within research and debates on the social implications of nanotechnology. This article shows that, in spite of its incipient development, nanotechnology is unquestionably moving toward manufacturing, involving a still very small but increasing component of the labor force. Based on secondary data and the literature review, I compose a picture of the emerging jobs in nanotechnology and highlight four emerging trends in nanotechnology workers' skills requirements. I show that, in addition to job creation, nanotechnology diffusion is likely to pose labor market changes that may be disruptive for some categories of workers.

Analyzing and organizing nanotechnology development: Application of the institutional analysis development framework to nanotechnology consortia

NARCIS (Netherlands)

Allarakhia, M.; Walsh, Steven Thomas

2012-01-01

Governments and companies around the globe have embraced nanotechnology as a strategically critical pan industrial technology. Many view it as one of the essential foundation technology bases of the next Schumpeterian wave. A number of commercial and government sponsored groups have developed a

Nanotechnology Cancer Therapy and Treatment

Science.gov (United States)

Nanotechnology offers the means to target therapies directly and selectively to cancerous cells and neoplasms. With these tools, clinicians can safely and effectively deliver chemotherapy, radiotherapy, and the next generation of immuno- and gene therapies to the tumor. Futhermore, surgical resection of tumors can be guided and enhanced by way of nanotechnology tools. Find out how nanotechnology will offer the next generation of our therapeutic arsenal to the patient.

Nanotechnology in Dermatology*

Science.gov (United States)

Antonio, João Roberto; Antônio, Carlos Roberto; Cardeal, Izabela Lídia Soares; Ballavenuto, Julia Maria Avelino; Oliveira, João Rodrigo

2014-01-01

The scientific community and general public have been exposed to a series of achievements attributed to a new area of knowledge: Nanotechnology. Both abroad and in Brazil, funding agencies have launched programs aimed at encouraging this type of research. Indeed, for many who come into contact with this subject it will be clear the key role that chemical knowledge will play in the evolution of this subject. And even more, will see that it is a science in which the basic structure is formed by distilling different areas of inter-and multidisciplinary knowledge along the lines of new paradigms. In this article, we attempt to clarify the foundations of nanotechnology, and demonstrate their contribution to new advances in dermatology as well as medicine in general. Nanotechnology is clearly the future. PMID:24626657

NANOTECHNOLOGY AND SPORT

Directory of Open Access Journals (Sweden)

Zoran Mašić

2010-03-01

Full Text Available We can say that sports are continuously evolving. To improve the quality of this work, changes are being made in all of these segments: development and selection of athletes, the improvement of technology for preparation and performance tactics, training methods for relaxation. On the other hand these are followed by rule changes, modern sports facilities, as well as legal regulations. One direction in the improvement of sports results is an attempt at rational spending of existing resources for athletes, regardless of whether in team or individual sports. Nanotechnology is also contributioning toward this direction. This paper points out the appearance of nanotechnology, its essence, i.e., the way it may effect the development of sports. Of course, it also points to the potential risk of applying nanotechnology to sports.

The Formation of Data on Nanotechnological Processes

Directory of Open Access Journals (Sweden)

Oleynik Olga Stepanovna

2015-05-01

Full Text Available The article presents the statistical monitoring of the main trends of nanotechnology development in Russia, as well as the review of the modern programs and documents devoted to urgent issues of nanotechnology development. The formation of system of statistical monitoring of nanotechnologies development in the Russian Federation includes the development of methodology and tools of statistical supervision over creation, commercialization, the use of nanotechnologies, and also the nanotechnological production. The authors carry out the analysis of the main directions and structure of co-funding of “The Program of nanotech industry development in the Russian Federation till 2015”. The sources of official statistical data on nanotechnologies in Russia are considered. The purpose of forming this essentially new direction of statistics consists in the creation of system of collecting, processing and submission of the regular, systematized and complex data which are adequately reflecting the state, the level of development and the prospects of nanotechnological sphere capacity which provide informational support to state policy and adoption of reasonable administrative decisions. The authors describe the system of statistical observations in the sphere of nanotechnologies. Today the statistics of nanotechnologies in Russia remains at the stage of formation and modernization according to the international standards, being supplemented every year with the new indicators which allow investigating different sides and tendencies of nanotech industry development. Nowadays the following aspects of the activity connected with nanotechnologies have already being studied by means of statistical methods: scientific research and developments; creation and use of nanotechnologies; demand for staff; production, including the innovative one.

Nanotechnology: Development and challenges in Indonesia

Science.gov (United States)

Joni, I. Made; Muthukannan, Vanitha; Hermawan, Wawan; Panatarani, Camellia

2018-02-01

Nanotechnology today is regarded as a revolutionary technology that can help to address the key needs related to energy, environment, health and agriculture in developing countries. This paper is a short review on the development and challenges of nanotechnology in Indonesia. Nanotechnology offers great potential benefits, there is emerging concerns arising from its novel physicochemical properties. The main applications of nanotechnology in the different sectors which is vital and its economic impact in Indonesia is also discussed. The achievment and development of nanotechnology including synthesis and dispersion of nanoparticles (NPs) and its applications in various fields is briefly addressed in Nanotehcnology and Graphene Research Center, Universitas Padjadjaran (Unpad). Despite significant progress in developmental goals, many challenges in the development of nanotechnology proccesing need to be resolved such as support infrastructure and evolution of new form of collaborative arrangements between various sectors and policies which is emerged as an important factor enabling development.

Simulation of CNT-AFM tip based on finite element analysis for targeted probe of the biological cell

Energy Technology Data Exchange (ETDEWEB)

Yousefi, Amin Termeh, E-mail: at.tyousefi@gmail.com; Miyake, Mikio, E-mail: miyakejaist@gmail.com; Ikeda, Shoichiro, E-mail: sho16.ikeda@gmail.com [ChECA IKohza, Dept. Environmental & Green Technology (EGT), Malaysia, Japan International Institute of Technology (MJIIT), University Technology Malaysia - UTM, Kualalumpur (Malaysia); Mahmood, Mohamad Rusop, E-mail: nano@uitm.gmail.com [NANO-SciTech Centre, Institute of Science, Universiti Teknologi MARA (UiTM), Shah Alam, Selangor (Malaysia)

2016-07-06

Carbon nanotubes (CNTs) are potentially ideal tips for atomic force microscopy (AFM) due to the robust mechanical properties, nano scale diameter and also their ability to be functionalized by chemical and biological components at the tip ends. This contribution develops the idea of using CNTs as an AFM tip in computational analysis of the biological cell’s. Finite element analysis employed for each section and displacement of the nodes located in the contact area was monitored by using an output database (ODB). This reliable integration of CNT-AFM tip process provides a new class of high performance nanoprobes for single biological cell analysis.

Toward Sustainable Anticipatory Governance: Analyzing and Assessing Nanotechnology Innovation Processes

Science.gov (United States)

Foley, Rider Williams

Cities around the globe struggle with socio-economic disparities, resource inefficiency, environmental contamination, and quality-of-life challenges. Technological innovation, as one prominent approach to problem solving, promises to address these challenges; yet, introducing new technologies, such as nanotechnology, into society and cities has often resulted in negative consequences. Recent research has conceptually linked anticipatory governance and sustainability science: to understand the role of technology in complex problems our societies face; to anticipate negative consequences of technological innovation; and to promote long-term oriented and responsible governance of technologies. This dissertation advances this link conceptually and empirically, focusing on nanotechnology and urban sustainability challenges. The guiding question for this dissertation research is: How can nanotechnology be innovated and governed in responsible ways and with sustainable outcomes? The dissertation: analyzes the nanotechnology innovation process from an actor- and activities-oriented perspective (Chapter 2); assesses this innovation process from a comprehensive perspective on sustainable governance (Chapter 3); constructs a small set of future scenarios to consider future implications of different nanotechnology governance models (Chapter 4); and appraises the amenability of sustainability problems to nanotechnological interventions (Chapter 5). The four studies are based on data collected through literature review, document analysis, participant observation, interviews, workshops, and walking audits, as part of process analysis, scenario construction, and technology assessment. Research was conducted in collaboration with representatives from industry, government agencies, and civic organizations. The empirical parts of the four studies focus on Metropolitan Phoenix. Findings suggest that: predefined mandates and economic goals dominate the nanotechnology innovation process

Nanotechnology publications and citations by leading countries and blocs

International Nuclear Information System (INIS)

Youtie, Jan; Shapira, Philip; Porter, Alan L.

2008-01-01

This article examines the relative positions with respect to nanotechnology research publications of the European Union (EU), the United States (US), Japan, Germany, China, and three Asian Tiger nations (South Korea, Singapore, and Taiwan). The analysis uses a dataset of nanotechnology publication records for the time period 1990 through 2006 (part year) extracted from the Science Citation Index obtained through the Web of Science and was developed through a two-stage modularized Boolean approach. The results show that although the EU and the US have the highest number of nanotechnology publications, China and other Asian countries are increasing their publications rapidly, taking an ever-larger proportion of the total. When viewed in terms of the quality-based measure of citations, Asian nanotechnology researchers also show growth in recent years. However, by such citation measures, the US still maintains a strongly dominant position, followed by the EU.

Nanotechnology for telecommunications

CERN Document Server

Anwar, Sohail; Qazi, Salahuddin; Ilyas, Mohammad

2010-01-01

With its unique promise to revolutionize science, engineering, technology, and other fields, nanotechnology continues to profoundly impact associated materials, components, and systems, particularly those used in telecommunications. These developments are leading to easier convergence of related technologies, massive storage data, compact storage devices, and higher-performance computing. Nanotechnology for Telecommunications presents vital technical scientific information to help readers grasp issues and challenges associated with nanoscale telecommunication system development and commerciali

Advanced Environment Friendly Nanotechnologies

Science.gov (United States)

Figovsky, O.; Beilin, D.; Blank, N.

The economic, security, military and environmental implications of molecular manufacturing are extreme. Unfortunately, conflicting definitions of nanotechnology and blurry distinctions between significantly different fields have complicated the effort to understand those differences and to develop sensible, effective policy for each. The risks of today's nanoscale technologies cannot be treated the same as the risks of longer-term molecular manufacturing. It is a mistake to put them together in one basket for policy consideration — each is important to address, but they offer different problems and will require far different solutions. As used today, the term nanotechnology usually refers to a broad collection of mostly disconnected fields. Essentially, anything sufficiently small and interesting can be called nanotechnology. Much of it is harmless. For the rest, much of the harm is of familiar and limited quality. Molecular manufacturing, by contrast, will bring unfamiliar risks and new classes of problems. The advanced environment friendly nanotechnologies elaborated by Israel Company Polymate Ltd. — International Research Center are illustrated.

Functionalized surfaces and nanostructures for nanotechnological applications

Science.gov (United States)

2003-01-01

order to detect and repair diseased cells is a popular idea of the benefits of nanotechnology, and one that even comes close to reality. Many companies are already in clinical trials for drug delivery mechanisms based on nanotechnology, but unfortunately none of them involve miniature submarines. It turns out that there are a whole range of more efficient ways that nanotechnology can enable better drug delivery without resorting to the use of nanomachines. Just the concept of navigating ones way around the body at will does not bear serious scrutiny. Imagine attempting to go against the flow in an artery—it would be like swimming upstream in a fast flowing river, while boulders the size of houses, red and while blood cells, rained down on you. Current medical applications of nanotechnology are far more likely to involve improved delivery methods, such as pulmonary or epidermal methods to avoid having to pass through the stomach, encapsulation for both delivery and delayed release, and eventually the integration of detection with delivery, in order for drugs to be delivered exactly where they are needed, thus minimizing side effects on healthy tissue and cells. As far as navigation goes, delivery will be by exactly the same method that the human body uses, going with the flow and `dropping anchor' when the drug encounters its target. 7. Shrinking stuff Another common misconception is that nanotechnology is primarily concerned with making things smaller. This has been exacerbated by images of tiny bulls, and miniature guitars that can be strummed with the tip of an AFM, that while newsworthy, merely demonstrate our new found control of matter at the sub-micron scale. While almost the whole focus of micro-technologies has been on taking macro-scale devices such as transistors and mechanical systems and making them smaller, nanotechnology is more concerned with our ability to create from the bottom up. In electronics, there is a growing realization that with the end of the

Study of AFM-based nanometric cutting process using molecular dynamics

International Nuclear Information System (INIS)

Zhu Pengzhe; Hu Yuanzhong; Ma Tianbao; Wang Hui

2010-01-01

Three-dimensional molecular dynamics (MD) simulations are conducted to investigate the atomic force microscope (AFM)-based nanometric cutting process of copper using diamond tool. The effects of tool geometry, cutting depth, cutting velocity and bulk temperature are studied. It is found that the tool geometry has a significant effect on the cutting resistance. The friction coefficient (cutting resistance) on the nanoscale decreases with the increase of tool angle as predicted by the macroscale theory. However, the friction coefficients on the nanoscale are bigger than those on the macroscale. The simulation results show that a bigger cutting depth results in more material deformation and larger chip volume, thus leading to bigger cutting force and bigger normal force. It is also observed that a higher cutting velocity results in a larger chip volume in front of the tool and bigger cutting force and normal force. The chip volume in front of the tool increases while the cutting force and normal force decrease with the increase of bulk temperature.

The risks of nanotechnology.

Science.gov (United States)

Williams, David

2005-11-01

Nanotechnology is extremely fashionable, especially in the medical products sector, but questions are now being asked about the potential for new health risks that are introduced with the products and processes associated with nanotechnology. This article discusses some of the principal findings of a new report on this subject.

AFM image of an entire polygene chromosome

International Nuclear Information System (INIS)

Li Minqian; Takeuchi; Ikai, A.

1994-01-01

The author present AFM images of an entire polygene chromosome of Drosophila for the first time. Comparing with conventional optical microscope, the AFM image of the polygene chromosomes provides much higher resolution and 3-D measurement capability which will lead to finer scale gene mapping and identification

FACTORS OF NANOTECHNOLOGY AND BIODIVERSITY: ENVIRONMENTAL AND EDUCATIONAL ASPECTS

Directory of Open Access Journals (Sweden)

A. V. Kozachek

2015-01-01

Full Text Available The aim is to consider the features of impact of nanotechnology on biodiversity in the future.Methods. We suggest an approach, according to which nanotechnologies are viewed as key technologies of the sixth technological order. It is assumed that nanotechnology may be a potential source of environmental problems of the future, and the basis for the creation of new advanced types of environmental engineering and technology. Since all of the above is important both within the actual environmental performance and for the purposes of professional engineering and environmental training. We suggest in this paper to view the problem of the impact of nanotechnology on biodiversity and the state of the environment through environmental and educational aspects.Results. We considered and analyzed the environmental and educational aspects of the application of nanotechnology in the period of the sixth technological order. Implementing procedures for their analysis has contributed to the identification and systematization of the various impacts of nanotechnology on biodiversity and the state of the environment, and identification of options for the prevention of such factors. Based on the results of such studies we have identified educational aspects of training environmental engineers during the sixth technological order; defined a new focus of the training in the sixth technological order, which involves, in our opinion, the study of features of a rational and prudent use of natural resources with the use of appropriate innovative eco-oriented nanotechnology, education of students in terms of the understanding of the causes, consequences and ways to prevent the global resource crisis on the planet due to the emergence of a new class of nano-contamination.Main conclusions. The results can be recommended to be used in practice for more in-depth analysis of the specific environmental challenges of nanotechnology, and revising approaches to the design of the

The track nanotechnology

International Nuclear Information System (INIS)

Waheed, A.; Forsyth, D.; Watts, A.; Saad, A.F.; Mitchell, G.R.; Farmer, M.; Harris, P.J.F.

2009-01-01

The discipline now called Solid State Nuclear Track Detection (SSNTD) dates back to 1958 and has its roots in the United Kingdom. Its strength stems chiefly from factors such as its simplicity, small geometry, permanent maintenance of the nuclear record and other diversified applications. A very important field with exciting applications reported recently in conjuction with the nuclear track technique is nanotechnology, which has applications in biology, chemistry, industry, medicare and health, information technology, biotechnology, and metallurgical and chemical technologies. Nanotechnology requires material design followed by the study of the quantum effects for final produced applications in sensors, medical diagnosis, information technology to name a few. We, in this article, present a review of past and present applications of SSNTD suggesting ways to apply the technique in nanotechnology, with special reference to development of nanostructure for applications utilising nanowires, nanofilters and sensors.

The track nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Waheed, A. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Forsyth, D., E-mail: dforsyth@bite.ac.u [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Watts, A. [Department of Physics, UCL, London Centre of Nanotechnology (LCN), 17-19 Gordon Street, London WC1H OAH (United Kingdom); Saad, A.F. [Physics Department, Faculty of Science, Garyounis University, Benghazi (Libyan Arab Jamahiriya); Mitchell, G.R. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Farmer, M. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Harris, P.J.F. [Physics Department, University of Reading, Reading RG6 6AF (United Kingdom)

2009-10-15

The discipline now called Solid State Nuclear Track Detection (SSNTD) dates back to 1958 and has its roots in the United Kingdom. Its strength stems chiefly from factors such as its simplicity, small geometry, permanent maintenance of the nuclear record and other diversified applications. A very important field with exciting applications reported recently in conjuction with the nuclear track technique is nanotechnology, which has applications in biology, chemistry, industry, medicare and health, information technology, biotechnology, and metallurgical and chemical technologies. Nanotechnology requires material design followed by the study of the quantum effects for final produced applications in sensors, medical diagnosis, information technology to name a few. We, in this article, present a review of past and present applications of SSNTD suggesting ways to apply the technique in nanotechnology, with special reference to development of nanostructure for applications utilising nanowires, nanofilters and sensors.

EDITORIAL: Nanotechnological selection Nanotechnological selection

Science.gov (United States)

Demming, Anna

2013-01-01

across the channel. The aim of achieving selectivity encompasses a huge range of fields in nanotechnology research, from sensing and medicine to nanoelectronics and self-assembly. As our understanding of how nanosystems behave deepens, so too does the hunger to improve our capabilities, allowing greater precision and control in manipulating these systems. Selectivity is far from trivial when shrinking to systems of nanoscale dimensions, but the range of opportunities it brings just keeps on growing. References [1] Gong X, Li J, Guo C, Xu K and Hui Y 2012 Molecular switch for tuning ions across nanopores by an external electric field Nanotechnology 24 025502 [2] Brannon-Peppas L and Blanchette J O 2004 Nanoparticle and targeted systems for cancer therapy Adv. Drug Deliv. Rev 56 1649-59 [3] Lukianova-Hleb E Y, Hanna E Y, Hafner J H and Lapotko D O 2010 Tunable plasmonic nanobubbles for cell theranostics Nanotechnology 21 085102 [4] Zhang T, Mubeen S, Myung N V and Deshusses M A 2008 Recent progress in carbon nanotube-based gas sensors Nanotechnology 19 332001 [5] Mangu R, Rajaputra S and Singh V P 2011 MWCNT-polymer composites as highly sensitive and selective room temperature gas sensors Nanotechnology 22 215502 [6]Meller A, Nivon L, Brandin E, Golovchenko J and Branton D 2000 Rapid nanopore discrimination between single polynucleotide molecules Proc. Natl Acad. Sci. 97 1079-84 [7] Asghar W, Ilyas A, Deshmukh R R, Sumitsawan S, Timmons R B and Iqbal S M 2011 Pulsed plasma polymerization for controlling shrinkage and surface composition of nanopores Nanotechnology 22 285304

Advanced Contrast Agents for Multimodal Biomedical Imaging Based on Nanotechnology.

Science.gov (United States)

Calle, Daniel; Ballesteros, Paloma; Cerdán, Sebastián

2018-01-01

Clinical imaging modalities have reached a prominent role in medical diagnosis and patient management in the last decades. Different image methodologies as Positron Emission Tomography, Single Photon Emission Tomography, X-Rays, or Magnetic Resonance Imaging are in continuous evolution to satisfy the increasing demands of current medical diagnosis. Progress in these methodologies has been favored by the parallel development of increasingly more powerful contrast agents. These are molecules that enhance the intrinsic contrast of the images in the tissues where they accumulate, revealing noninvasively the presence of characteristic molecular targets or differential physiopathological microenvironments. The contrast agent field is currently moving to improve the performance of these molecules by incorporating the advantages that modern nanotechnology offers. These include, mainly, the possibilities to combine imaging and therapeutic capabilities over the same theranostic platform or improve the targeting efficiency in vivo by molecular engineering of the nanostructures. In this review, we provide an introduction to multimodal imaging methods in biomedicine, the sub-nanometric imaging agents previously used and the development of advanced multimodal and theranostic imaging agents based in nanotechnology. We conclude providing some illustrative examples from our own laboratories, including recent progress in theranostic formulations of magnetoliposomes containing ω-3 poly-unsaturated fatty acids to treat inflammatory diseases, or the use of stealth liposomes engineered with a pH-sensitive nanovalve to release their cargo specifically in the acidic extracellular pH microenvironment of tumors.

Tip-surface interactions at redox responsive poly(ferrocenylsilane) (PFS) interface by AFM-based force spectroscopy

International Nuclear Information System (INIS)

Chung Hongjing; Song Jing; Vancso, G. Julius

2009-01-01

Poly(ferrocenylsilanes) (PFS) belong to the class of redox responsive organometallic polymers. Atomic force microscopy (AFM)-based single molecule force spectroscopy (SMFS) was used earlier to study single chain PFS response and redox energy driven single chain PFS molecular motors. Here we present further AFM investigations of force interactions between tip and a grafted PFS surface under potential control in electrochemical redox cycles. Typical tip-Au interaction is considered as reference in the force measurements. First the electrostatic component in the diffused double layer (DL) in NaClO 4 electrolyte environment was considered for a 'grafted to' PFS, which dominated the interplay between the tip and sample surface. The DL forces can also hinder the physisorption of PFS chain onto the tip when the voltage was applied at -0.1 V. On the other hand, if the tip contacted the PFS surface prior to the electrochemical process, physisorption of PFS chains governed the overall interaction regardless of subsequently applied surface potential. In addition, prolonged contact time, t c , may also contribute to the stability of tip-PFS bridging and detection of electrostatic forces between the tip-PFS interface. The results showed that tip-substrate interaction forces without PFS grafts have negligibly small force contributions under similar, electrochemically controlled, conditions used in single PFS chain based molecular motors.

Nanotechnology between the lab and the shop floor: what are the effects on labor?

International Nuclear Information System (INIS)

Invernizzi, Noela

2011-01-01

Nanotechnology’s effects on labor and employment have received little attention within research and debates on the social implications of nanotechnology. This article shows that, in spite of its incipient development, nanotechnology is unquestionably moving toward manufacturing, involving a still very small but increasing component of the labor force. Based on secondary data and the literature review, I compose a picture of the emerging jobs in nanotechnology and highlight four emerging trends in nanotechnology workers’ skills requirements. I show that, in addition to job creation, nanotechnology diffusion is likely to pose labor market changes that may be disruptive for some categories of workers.

Fairness and nanotechnology concern.

Science.gov (United States)

McComas, Katherine A; Besley, John C

2011-11-01

Research suggests that fairness perceptions matter to people who are asked to evaluate the acceptability of risks or risk management. Two separate national random surveys (n = 305 and n = 529) addressed Americans' concerns about and acceptance of nanotechnology risk management in the context of the degree to which they view scientists and risk managers as fair. The first survey investigated general views about scientists across four proposed dimensions of fairness (distributional, procedural, interpersonal, and informational). The results show that respondents who believe that the outcomes of scientific research tend to result in unequal benefits (distributional fairness) and that the procedures meant to protect the public from scientific research are biased (procedural fairness) were more concerned about nanotechnology. Believing scientists would treat them with respect (interpersonal fairness) and ensure access to information (informational fairness) were not significant predictors of concern. The second study also looked at these four dimensions of fairness but focused on perceptions of risk managers working for government, universities, and major companies. In addition to concern, it also examined acceptance of nanotechnology risk management. Study 2 results were similar to those of study 1 for concern; however, only perceived informational fairness consistently predicted acceptance of nanotechnology risk management. Overall, the study points to the value of considering fairness perceptions in the study of public perceptions of nanotechnology. © 2011 Society for Risk Analysis.

Nanotechnology for the Prevention and Treatment of Cataract.

Science.gov (United States)

Cetinel, Sibel; Montemagno, Carlo

2015-01-01

The purpose of this article was to review recent advances in the applications of nanotechnology in cataract treatment and prevention strategies. A literature review on the use of nanotechnology for the prevention and treatment of cataract was done. Research articles about nanotechnology-based treatments and prevention technologies for cataract were searched on Web of Science, and the most recent advances were reported. Nonsteroid anti-inflammatory drugs, natural antioxidants, biologic and chemical chaperones, and chaperones such as molecules have found great application in preventing and treating cataracts. Current scientific research on new treatment strategies, which focuses on the biochemical basis of the disease, will likely result in new anticataract agents. However, none of the drug formulations will be approved for use unless efficient delivery is promised. Nanoparticle engineering together with biomimetic strategies enable the development of next-generation, more efficient, less complex, and personalized treatments. The only currently available treatment for cataracts, surgical replacement of the opacified lens, is not an easily accessible option in developing countries. New treatment strategies based on topical drugs would enable treatment to reach massive populations facing the threat of blindness and more effectively deal with the postsurgical complications. Nanotechnology plays a key role in improving drug delivery systems with enhanced controlled release, targeted delivery, and bioavailability to overcome diffusion limitations in the eye.

Nanotechnology in dentistry: Current achievements and prospects

OpenAIRE

Ramandeep Singh Gambhir; G M Sogi; Ashutosh Nirola; Rajdeep Brar; Tegbir Sekhon; Heena Kakar

2013-01-01

Nanotechnology offers advances particularly in each and every field of human activity such as electronics, industry, telecommunications, environmental science, etc., The field of nanotechnology has got remarkable potential that can bring considerable improvements to the human health, enhanced use of natural resources, and reduced environmental pollution. Since 1990s, nanotechnology has been exploited for potential medical and dental applications. Nanotechnology holds promise for advanced diag...

The slings and arrows of communication on nanotechnology

International Nuclear Information System (INIS)

Simons, Johannes; Zimmer, Rene; Vierboom, Carl; Haerlen, Ingo; Hertel, Rolf; Boel, Gaby-Fleur

2009-01-01

According to numerous surveys the perceived risk of nanotechnology is low and most people feel that the benefits outweigh the risks. This article provides greater insight into risk perception and concludes that the positive attitude to nanotechnology is based not on knowledge but on hope and fascination. The perceived risk is low because of a lack of vivid and frightening images of possible hazards. If news flashes were to link nanotechnology to concrete hazards or actual harm to people, attitudes might suddenly change. Risk communication faces the problem of dealing with a public at large that has little or no knowledge about the technology. As it takes time and extensive additional research to develop appropriate communication strategies and disseminate them to the relevant institutions, this exercise should be started immediately.

Fabrication of tuning-fork based AFM and STM tungsten probe

KAUST Repository

Al-Falih, Hisham

2011-12-01

We compare the sharpness of tungsten probe tips produced by the single-step and two-step dynamic electrochemical etching processes. A small radius of curvature (RoC) of 25 nm or less was routinely obtained when the two-step electrochemical etching (TEE) process was adopted, while the smallest achievable RoC was ∼10 nm, rendering it suitable for atomic force microscopy (AFM) or scanning tunneling microscopy (STM) applications. © 2011 IEEE.

A review of water treatment membrane nanotechnologies

KAUST Repository

Pendergast, MaryTheresa M.

2011-01-01

Nanotechnology is being used to enhance conventional ceramic and polymeric water treatment membrane materials through various avenues. Among the numerous concepts proposed, the most promising to date include zeolitic and catalytic nanoparticle coated ceramic membranes, hybrid inorganic-organic nanocomposite membranes, and bio-inspired membranes such as hybrid protein-polymer biomimetic membranes, aligned nanotube membranes, and isoporous block copolymer membranes. A semi-quantitative ranking system was proposed considering projected performance enhancement (over state-of-the-art analogs) and state of commercial readiness. Performance enhancement was based on water permeability, solute selectivity, and operational robustness, while commercial readiness was based on known or anticipated material costs, scalability (for large scale water treatment applications), and compatibility with existing manufacturing infrastructure. Overall, bio-inspired membranes are farthest from commercial reality, but offer the most promise for performance enhancements; however, nanocomposite membranes offering significant performance enhancements are already commercially available. Zeolitic and catalytic membranes appear reasonably far from commercial reality and offer small to moderate performance enhancements. The ranking of each membrane nanotechnology is discussed along with the key commercialization hurdles for each membrane nanotechnology. © 2011 The Royal Society of Chemistry.

NANOTECHNOLOGY IN TEXTILE INDUSTRY [REVIEW

Directory of Open Access Journals (Sweden)

RATIU Mariana

2015-05-01

Full Text Available Nanoscience and nanotechnology are the study and application of extremely small things and can be used across all the other science fields, such as chemistry, biology, physics, materials science, and engineering. Nanotechnology overcomes the limitation of applying conventional methods to impart certain properties to textile materials. There is no doubt that in the next few years nanotechnology will penetrate into every area of the textile industry. Nanotextiles are nanoscale fibrous materials that can be fictionalized with a vast array of novel properties, including antibiotic activity, self-cleaning and the ability to increase reaction rates by providing large surface areas to potential reactants. These materials are used not only as cloth fabric, but as filter materials, wound-healing gauzes and antibacterial food packaging agents in food industry. World demand for nano-materials will rise more than two-and-a-half times to $5.5 billion in 2016 driven by a combination of increased market penetration of existing materials, and ongoing development of new materials and applications. In recent years was demonstrated that nanotechnology can be used to enhance textile attributes, such as fabric softness, durability and breathability, water repellency, fire retardancy, antimicrobial properties in fibers, yarns and fabrics. The development of smart nanotextiles has the potential to revolutionize the production of fibers, fabrics or nonwovens and functionality of our clothing and all types of textile products and applications. Nanotechnology is considered one of the most promising technologies for the 21st century. Today is said that if the IT is the wave of the present, the nanotechnology is the wave of the present, the nanotechnology is the wave of the future.

Application of Radiation in Nanotechnology

International Nuclear Information System (INIS)

Chmielewska, D.K.; Chmielewski, A.G.; Michalik, J.

2005-01-01

, photoelectric and non-linear optic materials. An interesting field of radiation nano-technological application concerns the development of PC-controlled bio-chips for programmed release systems. Nano-ordered hydrogels based on natural polymers as polysaccharides (hyaluronic acid, agarose, starch, chitosan) and proteins (keratin, soy-bean) being pH and electric potential responsive materials for such bio-chips and sensors. To avoid the regress in further developments concerning radiation processing of natural polymers, the nano approach to these biological materials should be developed further. The studies on natural rubber-clay composites and thermoplastic natural rubber-clay composites have given interesting results. (Author)

Glucose-based Biofuel Cells: Nanotechnology as a Vital Science in Biofuel Cells Performance

OpenAIRE

Hamideh Aghahosseini; Ali Ramazani; Pegah Azimzadeh Asiabi; Farideh Gouranlou; Fahimeh Hosseini; Aram Rezaei; Bong-Ki Min; Sang Woo Joo

2016-01-01

Nanotechnology has opened up new opportunities for the design of nanoscale electronic devices suitable for developing high-performance biofuel cells. Glucose-based biofuel cells as green energy sources can be a powerful tool in the service of small-scale power source technology as it provides a latent potential to supply power for various implantable medical electronic devices. By using physiologically produced glucose as a fuel, the living battery can recharge for continuous production of el...

Russia's Policy and Standing in Nanotechnology

Science.gov (United States)

Terekhov, Alexander I.

2013-01-01

In this article, I consider the historical stages of development of nanotechnology in Russia as well as the political framework for this. It is shown that early federal nanotechnology programs in Russia date back to the 1990s and that since the mid-2000s, nanotechnology has attracted the increasing attention of government. I characterize the…

Effect of Nanotechnology

OpenAIRE

D.Baswaraj; Vasanthi,; Sareddy Deepthi; Mohammad Zainuddin

2012-01-01

In this paper, we will put forward the vast effect on nanotechnology in various fields. A basic definition of Nanotechnology is the study manipulation and manufacture of extremely minute machines or devices. The future of technology at times becomes easier to predict. Computers will compute faster, materials will become stronger and medicine will cure more diseases .the technology that works at the nanometer scale of molecules and atoms will be a large part of this future, enabling great impr...

RISKS AND SAFETY OF USING NANOTECHNOLOGIES OF FOOD PRODUCTS: A REVIEW

Directory of Open Access Journals (Sweden)

N. A. Gorbunova

2016-01-01

Full Text Available The problem of healthy and quality nutrition has a global character. The modern development of technologies including nanotechnologies allowed obtaining materials with unique properties, which began to be actively used in food industry and agriculturebut, at the same time, require thorough investigation of their properties and effects on the human body and environment. The paper demonstrates the main directions of the nanotechnology use in the agricultural production and food industry, examines the safetyproblems and risks occurred when using nanotechnologies in food industry with account for insufficient research on the influence of food nanotechnologies on human health and environmental ecology, and presents the normative and methodical base of the RussianFederation for assurance of safe consumption of food products produced from nanomaterials.

Welcome to NNIN | National Nanotechnology Infrastructure Network

Science.gov (United States)

Skip to main content National Nanotechnology Infrastructure Network National Nanotechnology Infrastructure Network Serving Nanoscale Science, Engineering & Technology Search form Search Search Home facilities feature over 1100 modern nanotechnology instruments such as these Reactive Ion Etch systems at the

Food neophobia, nanotechnology and satisfaction with life.

Science.gov (United States)

Schnettler, Berta; Crisóstomo, Gloria; Sepúlveda, José; Mora, Marcos; Lobos, Germán; Miranda, Horacio; Grunert, Klaus G

2013-10-01

This study investigates the relationship between food neophobia, satisfaction with life and food-related life, and acceptance of the use of nanotechnology in food production. Questionnaire data was collected from a sample of 400 supermarket shoppers in southern Chile. The questionnaire measured knowledge of nanotechnology and willingness to purchase food products involving nanotechnology, and included the SWLS (Satisfaction with Life Scale), SWFL (Satisfaction with Food-related Life) and FNS (Food Neophobia Scale) scales. Using cluster analysis, four consumer types were distinguished with significant differences in their scores on the SWLS, SWFL and FNS. The types differed in their knowledge of nanotechnology, willingness to purchase foods involving nanotechnology, age, socioeconomic level and lifestyle. The least food-neophobic type had the highest levels of satisfaction with life and with food-related life and also had the highest acceptance of packaging and foods produced with nanotechnology. The results suggest that the degree of food neophobia is associated with satisfaction with life and with food-related life, as well as with the acceptance of products with nanotechnological applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

The nanotech R&D situation in Japan and ethics of nanotechnology.

Science.gov (United States)

Kato, Yutaka

2011-01-01

The aim of this paper is to introduce some characteristics of the historical as well as current situation of nanotech research and development in Japan in particular including regulations, and to discuss how ethical issues of nanotechnology should be addressed or how the ethics of nanotechnology should be constructed to fit the situation. The first part will center around the strength and weakness of Japan's nanotech R&D (research and development) and new circumstances which nanotechnology has prompted in Japan and alongside which nanotechnology has arrived (especially interdisciplinarity). The following prescriptive argument will, based on the descriptive account, question how to address ethical issues of nanotechnology, taking into consideration the nature of nanotech R&D, namely continuity, uniqueness, international dimension and political intervention, citing the example of the pharmaceutical industry. I will argue that international cooperation in the form of mutual reference to, replication of and the integration of guidelines and regulations, can enhance cost-effectiveness to ensure the comprehensiveness of regulatory measures.

Emerging applications of radiation in nanotechnology. Proceedings of a consultants meeting

International Nuclear Information System (INIS)

2005-03-01

Nanotechnology is one of the fastest growing areas in science and engineering, for synthesis of nanoparticles and nanocomposites with improved characteristics. Radiation-based technology using X rays, e-beams and ion beams is the key to a variety of different approaches to micropatterning. Radiation processed nanomaterials with high abrasion and high scratch resistance or biomedical usage (controlled release drug delivery systems) are of increasing importance. The ability to fabricate structures with nanometric precision is fundamental to any exploitation of nanotechnology. The report covers selected developments in nanotechnology and on this basis presents the potential role of radiation applications in the field. It is the first publication on radiation applications in nanotechnology and therefore will play an important role in stimulating further research on the subject. The main topics reported and discussed are recent trends in nanotechnology, fundamental issues in the effects of radiation on nanostructures, fabrication of nanostructures using radiation, technological applications including electron, ion beam and X ray lithography, polymeric nanostructures and nanoparticle reinforced polymers

Broadening nanotechnology's impact on development

NARCIS (Netherlands)

Beumer, K.

2016-01-01

Discussions about nanotechnology and development focus on applications that directly address the needs of the world’s poor. Nanotechnology can certainly make an impact in the fight against global poverty, but we need to broaden our imagination.

QUALITY PARAMETERS IN NANOTECHNOLOGIC APPLICATIONS

Directory of Open Access Journals (Sweden)

Ayşegül Akdoğan Eker

2013-06-01

Full Text Available Nanotechnology concept which has added a new dimension to our lives in recent years, is finding a place in every sector day by day. The combined effect of nanotechnology is almost equal to the industrial revolution of last 200 years and have is able to fill all developments in a few years. However this development should be taken under control. Otherwise unstoppable new structures will not ease life but will be a problem for humanity. For this purpose, the main parameters (from the start up stage of nano-technologic applications to the obtained product should be checked. These parameters are actually not different than the adaptation of the classical quality indicators for nanotechnology applications. Especially it plays an important role in obtaining a uniform distribution and regarding the features of the end product in nano-technological ceramic and etc. applications. The most important problem faced in particles of that size is the accumulation they create. Another problem is the increasing friction force as size gets smaller. The friction force of asubstance increases proportionally with the cube of its surface area. Another problem is surface tension. The increasing surface tension due to increasing surface area will cause the particles to attract and stick to each other. The structures aimed to be obtained are mostly complex and especially in upwards approach, it is thermodynamically very hard for the atoms to get into that order. Therefore in this announcement, we stated the quality parameters that will be taken into consideration in nano-technological applications and the methods for obtaining those parameters. The aim is to explain these parameters with all dimensions so that they will lead the way to the future nano-technological applications.

Development of Alternative Power Industry Based on Nanotechnologies: Forecast Effects for Russian Economy

Directory of Open Access Journals (Sweden)

Inshakova Elena Ivanovna

2014-11-01

Full Text Available The aspiration of countries to achieve sustainable economic growth by reducing the energy dependence of the main suppliers of energy resources and by increasing national energy security induces in the conditions of increasing competition between participants in the global energy market the necessity to intensify the use of internal development resources, including the introduction of energy-saving technologies and development of alternative power industry. The urgency of the problems of international competitiveness achievement based on the energy security strengthening, solution of which largely determines the directions of the energy sector development, is increasingly recognized in many countries, including Russia. Timeliness of preparation to the use of substitute innovative energy resources and energy sources, while the traditional fossil fuels are dwindling, is marked as one of the most important principles of the state policy of Russia. All these factors update the development of domestic alternative energy in accordance with the megatrends of the world energy sector. The prospects for the development of modern energy, especially alternative, are associated by many experts with the use of nanotechnologies and nanomaterials. Nanotechnologies contribute to the new opportunities for the use of renewable energy sources and a significant contribution to the production and conservation of energy. The main directions of the effective use of nanotechnologies in the energy sector are: the use of renewable sources; energy storage; reducing the consumption of materials; the use of alternative materials. On the example of the world and Russian practice of nanotechnologies and nanomaterials use in the sphere of wind and solar energy the basic effects of their application, important for the development of alternative energy and of the Russian national economy as a whole, are identified in the article. The most important effects include strengthening

The use of Museum Based Science Centres to Expose Primary School Students in Developing Countries to Abstract and Complex Concepts of Nanoscience and Nanotechnology

Science.gov (United States)

Saidi, Trust; Sigauke, Esther

2017-10-01

Nanotechnology is an emerging technology, and it is regarded as the basis for the next industrial revolution. In developing countries, nanotechnology promises to solve everyday challenges, such as the provision of potable water, reliable energy sources and effective medication. However, there are several challenges in the exploitation of nanotechnology. One of the notable challenges is the lack of adequate knowledge about how materials behave at the nanoscale. As nanotechnology is relatively new, the current generation of scientists have not had the opportunity to learn the fundamentals of the technology at an early stage. Young students who are at the primary school level may follow the same trajectory if they are not exposed to the technology. There is a need to lay a strong foundation by introducing nanoscience and nanotechnology to students at the primary school level. It is during the early stages of child development that students master basic concepts for life long learning. Nevertheless, many primary school children, particularly those in developing countries are missing the chance of learning about nanoscience and nanotechnology because it is regarded as being abstract and complex. In this paper, we argue that despite the complexity of nanoscience and nanotechnology, science centres can be used as one of the platforms for exposing young students to the discipline. We use a case study of a museum-based science centre as an example to illustrate that young students can be exposed to nanoscience and nanotechnology using tactile and hands-on experience. The early engagement of primary school children with nanoscience and nanotechnology is important in raising the next generation of scientists who are firmly grounded in the discipline.

Strategies for the AFM-based manipulation of silver nanowires on a flat surface

Science.gov (United States)

Liu, Hong-Zhi; Wu, Sen; Zhang, Jun-Ming; Bai, Hui-Tian; Jin, Fan; Pang, Hai; Hu, Xiao-Dong

2017-09-01

Silver nanowires (Ag NWs) are a promising material for building various sensors and devices at the nanoscale. However, the fast and precise placement of individual Ag NWs is still a challenge today. Atomic force microscopy (AFM) has been widely used to manipulate nanoparticles, yet this technology encounters many difficulties when being applied to the movement of Ag NWs as well as other soft one-dimensional (1D) materials, since the samples are easily distorted or even broken due to friction and adhesion on the substrate. In this paper, two novel manipulation strategies based on the parallel pushing method are presented. This method applies a group of short parallel pushing vectors (PPVs) to the Ag NW along its longitudinal direction. Identical and proportional vectors are respectively proposed to translate and rotate the Ag NWs with a straight-line configuration. The rotation strategy is also applied to straighten flexed Ag NWs. The finite element method simulation is introduced to analyse the behaviour of the Ag NWs as well as to optimize the parameter setting of the PPVs. Experiments are carried out to confirm the efficiency of the presented strategies. By comprehensive application of the new strategies, four Ag NWs are continuously assembled in a rectangular pattern. This study improves the controllability of the position and configuration of Ag NWs on a flat substrate. It also indicates the practicability of automatic nanofabrication using common AFMs.

AFM tip characterization by using FFT filtered images of step structures

Energy Technology Data Exchange (ETDEWEB)

Yan, Yongda, E-mail: yanyongda@hit.edu.cn [Key Laboratory of Micro-systems and Micro-structures Manufacturing of Ministry of Education, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Center For Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Xue, Bo [Key Laboratory of Micro-systems and Micro-structures Manufacturing of Ministry of Education, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Center For Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Hu, Zhenjiang; Zhao, Xuesen [Center For Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China)

2016-01-15

The measurement resolution of an atomic force microscope (AFM) is largely dependent on the radius of the tip. Meanwhile, when using AFM to study nanoscale surface properties, the value of the tip radius is needed in calculations. As such, estimation of the tip radius is important for analyzing results taken using an AFM. In this study, a geometrical model created by scanning a step structure with an AFM tip was developed. The tip was assumed to have a hemispherical cone shape. Profiles simulated by tips with different scanning radii were calculated by fast Fourier transform (FFT). By analyzing the influence of tip radius variation on the spectra of simulated profiles, it was found that low-frequency harmonics were more susceptible, and that the relationship between the tip radius and the low-frequency harmonic amplitude of the step structure varied monotonically. Based on this regularity, we developed a new method to characterize the radius of the hemispherical tip. The tip radii estimated with this approach were comparable to the results obtained using scanning electron microscope imaging and blind reconstruction methods. - Highlights: • The AFM tips with different radii were simulated to scan a nano-step structure. • The spectra of the simulation scans under different radii were analyzed. • The functions of tip radius and harmonic amplitude were used for evaluating tip. • The proposed method has been validated by SEM imaging and blind reconstruction.

Nanotechnology applications in medicine and dentistry.

Science.gov (United States)

Gupta, Jyoti

2011-05-01

Nanotechnology, or nanoscience, refers to the research and development of an applied science at the atomic, molecular, or macromolecular levels (i.e. molecular engineering, manufacturing). The prefix "nano" is defined as a unit of measurement in which the characteristic dimension is one billionth of a unit. Although the nanoscale is small in size, its potential is vast. As nanotechnology expands in other fields, clinicians, scientists, and manufacturers are working to discover the uses and advances in biomedical sciences. Applications of nanotechnology in medical and dental fields have only approached the horizon with opportunities and possibilities for the future that can only be limited by our imagination. This paper provides an early glimpse of nanotechnology applications in medicine and dentistry to illustrate their potentially far-reaching impacts on clinical practice. It also narrates the safety issues concerning nanotechnology applications. © 2011 Blackwell Publishing Asia Pty Ltd.

AFM ve farmaceutické technologii 3.

OpenAIRE

Ščuryová, Veronika

2015-01-01

Charles University in Prague Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Student: Veronika Ščuryová Supervisor: doc. RNDr. Pavel Doležal, CSc. Title of thesis: AFM in Pharmaceutical Technology 3 The theoretical part deals first with the construction of AFM microscope, the principle of the method, determining the surface topography and regimes which can be used. Described therein are distinct advantages over previous traditional methods but also its pitfalls. ...

Silent innovation: corporate strategizing in early nanotechnology evolution

DEFF Research Database (Denmark)

Andersen, Maj Munch

2011-01-01

Nanotechnology offers a rare opportunity to study the early evolution of a new generic technology in real time. This paper suggests focusing more on the market formation side, rather than technology generation, when seeking to explain technology evolution. Applying an evolutionary capabilities...... perspective, the paper examines how firms organize innovation in the early embryonic stages of a technology and how the market as a selective device undergoes qualitative change as part of economic evolution. The traditional Danish window chain is used as a case. A model of nanotechnology evolution...... is proposed which suggests that nanotechnology commercialization is significantly driven by small and medium-sized firms based on their internal knowhow, with larger firms as important suppliers of know how. These smaller firms are adept at addressing social needs which appear to be key factors in the nano...

Development of a HIV-1 Virus Detection System Based on Nanotechnology

Directory of Open Access Journals (Sweden)

Jin-Ho Lee

2015-04-01

Full Text Available Development of a sensitive and selective detection system for pathogenic viral agents is essential for medical healthcare from diagnostics to therapeutics. However, conventional detection systems are time consuming, resource-intensive and tedious to perform. Hence, the demand for sensitive and selective detection system for virus are highly increasing. To attain this aim, different aspects and techniques have been applied to develop virus sensor with improved sensitivity and selectivity. Here, among those aspects and techniques, this article reviews HIV virus particle detection systems incorporated with nanotechnology to enhance the sensitivity. This review mainly focused on four different detection system including vertically configured electrical detection based on scanning tunneling microscopy (STM, electrochemical detection based on direct electron transfer in virus, optical detection system based on localized surface plasmon resonance (LSPR and surface enhanced Raman spectroscopy (SERS using plasmonic nanoparticle.

Development of a HIV-1 Virus Detection System Based on Nanotechnology.

Science.gov (United States)

Lee, Jin-Ho; Oh, Byung-Keun; Choi, Jeong-Woo

2015-04-27

Development of a sensitive and selective detection system for pathogenic viral agents is essential for medical healthcare from diagnostics to therapeutics. However, conventional detection systems are time consuming, resource-intensive and tedious to perform. Hence, the demand for sensitive and selective detection system for virus are highly increasing. To attain this aim, different aspects and techniques have been applied to develop virus sensor with improved sensitivity and selectivity. Here, among those aspects and techniques, this article reviews HIV virus particle detection systems incorporated with nanotechnology to enhance the sensitivity. This review mainly focused on four different detection system including vertically configured electrical detection based on scanning tunneling microscopy (STM), electrochemical detection based on direct electron transfer in virus, optical detection system based on localized surface plasmon resonance (LSPR) and surface enhanced Raman spectroscopy (SERS) using plasmonic nanoparticle.

Novel Nanotechnology Strategies for the Treatment and Prevention of HIV Infection

Science.gov (United States)

Tan, Jian Jun; Sun, Xiao Hui; Ma, Xue Ting; Guan, Jian Qing; Wang, Cun Xin

2013-09-01

It is a hard work to develop an hightly effective cure and prevention of HIV/AIDS. The widespread used of some therapy approaches such as highly active anti retroviral therapy (HAART) has improved life quality and span of infected individuals. However, some limitations of these approaches prevent them achieving further advancement. Recent research on drug delivery approaches indicates that engineered nanosystems may bring positive effect on the improvement of current antiretroviral therapy. Furthermore, the basic researches of nanotechnology- based systems which prevent HIV transmission have been started. Therefore, nanotechnology may become a potential approach in the field of HIV/AIDS treatment and prevention. This chapter reviews the latest advancement in the field of nanotechnology-based systems which improve the fields of HIV/AIDS treatment and prevention.

High-speed AFM of human chromosomes in liquid

Energy Technology Data Exchange (ETDEWEB)

Picco, L M; Dunton, P G; Ulcinas, A; Engledew, D J; Miles, M J [H H Wills Physics Laboratory and IRC in Nanotechnology, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Hoshi, O; Ushiki, T [Division of Microscopic Anatomy and Bio-Imaging, Department of Cellular Function, Niigata University Graduate School of Medical and Dental Sciences, Asahimachi-Dori 1, Niigata, 951-8150 (Japan)], E-mail: m.j.miles@bristol.ac.uk

2008-09-24

Further developments of the previously reported high-speed contact-mode AFM are described. The technique is applied to the imaging of human chromosomes at video rate both in air and in water. These are the largest structures to have been imaged with high-speed AFM and the first imaging in liquid to be reported. A possible mechanism that allows such high-speed contact-mode imaging without significant damage to the sample is discussed in the context of the velocity dependence of the measured lateral force on the AFM tip.

Nanotechnology research among some leading OIC member states

International Nuclear Information System (INIS)

Bajwa, R. S.; Yaldram, K.; Hussain, S. S.; Ahmed, T.

2012-01-01

In this study we present an overview of the research activities in nanotechnology for the period 2001–2011 for six selected countries belonging to the Organization of Islamic cooperation (OIC). The selection has been made based on the research output of these countries. The countries are Iran, Turkey, Egypt, Malaysia, Saudi Arabia, and Pakistan. The factors considered are the number of publications, citations per paper, p-index, and collaborative research output. Iran with 7,795 publications and an annual growth rate of 41 % leads the group, followed by Turkey with 3,169 publications and an annual growth rate of 29 %. Turkey however, has a much better citation per paper (8.96), and p-index (63.34) as compared to Iran (4.59 and 54.36, respectively). We can classify the six countries into two categories. Those, that have a well coordinated national program in nanotechnology, namely, Iran, Malaysia, and Saudi Arabia and those that do not have any national program but are still showing a reasonable good activity in nanotechnology namely Turkey, Egypt, and Pakistan. A brief account of the initiatives taken by the six selected countries of OIC in the field of nanotechnology is also presented.

The NCI Alliance for Nanotechnology in Cancer: achievement and path forward.

Science.gov (United States)

Ptak, Krzysztof; Farrell, Dorothy; Panaro, Nicholas J; Grodzinski, Piotr; Barker, Anna D

2010-01-01

Nanotechnology is a 'disruptive technology', which can lead to a generation of new diagnostic and therapeutic products, resulting in dramatically improved cancer outcomes. The National Cancer Institute (NCI) of National Institutes of Health explores innovative approaches to multidisciplinary research allowing for a convergence of molecular biology, oncology, physics, chemistry, and engineering and leading to the development of clinically worthy technological approaches. These initiatives include programmatic efforts to enable nanotechnology as a driver of advances in clinical oncology and cancer research, known collectively as the NCI Alliance for Nanotechnology in Cancer (ANC). Over the last 5 years, ANC has demonstrated that multidisciplinary approach catalyzes scientific developments and advances clinical translation in cancer nanotechnology. The research conducted by ANC members has improved diagnostic assays and imaging agents, leading to the development of point-of-care diagnostics, identification and validation of numerous biomarkers for novel diagnostic assays, and the development of multifunctional agents for imaging and therapy. Numerous nanotechnology-based technologies developed by ANC researchers are entering clinical trials. NCI has re-issued ANC program for next 5 years signaling that it continues to have high expectations for cancer nanotechnology's impact on clinical practice. The goals of the next phase will be to broaden access to cancer nanotechnology research through greater clinical translation and outreach to the patient and clinical communities and to support development of entirely new models of cancer care.

Nanotechnology in the Security

CERN Document Server

Kruchinin, Sergei

2015-01-01

The topics discussed at the NATO Advanced Research Workshop "Nanotechnology in the Security Systems" included nanophysics,   nanotechnology,  nanomaterials, sensors, biosensors security systems, explosive  detection . There have been many significant advances in the past two years and some entirely new directions of research are just opening up. Recent advances in nanoscience have demonstrated that fundamentally new physical phenomena  are found when systems are reduced in size with  dimensions, comparable to the fundamental microscopic  length scales of the investigated material. Recent developments in nanotechnology and measurement techniques now allow experimental investigation of transport properties of nanodevices. This work will be of interest to researchers working in spintronics, molecular electronics and quantum information processing.

Block Copolymers: Synthesis and Applications in Nanotechnology

Science.gov (United States)

Lou, Qin

This study is focused on the synthesis and study of (block) copolymers using reversible deactivation radical polymerizations (RDRPs), including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain transfer (RAFT) polymerization. In particular, two primary areas of study are undertaken: (1) a proof-of-concept application of lithographic block copolymers, and (2) the mechanistic study of the deposition of titania into block copolymer templates for the production of well-ordered titania nanostructures. Block copolymers have the ability to undergo microphase separation, with an average size of each microphase ranging from tens to hundreds of nanometers. As such, block copolymers have been widely considered for nanotechnological applications over the past two decades. The development of materials for various nanotechnologies has become an increasingly studied area as improvements in many applications, such as those found in the semiconductor and photovoltaic industries are constantly being sought. Significant growth in developments of new synthetic methods ( i.e. RDRPs) has allowed the production of block copolymers with molecular (and sometimes atomic) definition. In turn, this has greatly expanded the use of block copolymers in nanotechnology. Herein, we describe the synthesis of statistical and block copolymers of 193 nm photolithography methacrylate and acrylate resist monomers with norbornyl and adamantyl moieties using RAFT polymerization.. For these resist (block) copolymers, the phase separation behaviors were examined by atomic force microscopy (AFM). End groups were removed from the polymers to avoid complications during the photolithography since RAFT end groups absorb visible light. Poly(glycidyl methacrylate-block-polystyrene) (PGMA-b-PS) was synthesize by ATRP and demonstrated that this block copolymer acts as both a lithographic UV (365 nm) photoresist and a self-assembly material. The PGMA segments can undergo cationic

Awareness on adverse effects of nanotechnology increases negative perception among public: survey study from Singapore

International Nuclear Information System (INIS)

George, Saji; Kaptan, Gulbanu; Lee, Joel; Frewer, Lynn

2014-01-01

As has been demonstrated by recent societal controversies associated with the introduction of novel technologies, societal acceptance of a technology and its applications is shaped by consumers’ perceived risks and benefits. The research reported here investigates public perceptions of nanotechnology in Singapore, where technological innovation is an established part of the economy, and it might be expected that consumer perceptions of risk are low, and those of benefit are high. The contribution of socio-demographic variables, knowledge level and exposure to risk information in shaping risk perception about nanotechnology applications within different application sectors were analysed. About ∼80 % of respondents have some understanding of nanotechnology, 60 % report having heard some negative information, and 39 % perceive nanotechnology as beneficial, while 27.5 % perceive it as risky. Nanotechnology application in food was reported to cause the most concern in the consumers included in the sample. Two-step cluster analysis of the data enabled grouping of respondents into those who expressed ‘less concern’ or ‘more concern’ based on their average scores for concern levels expressed with applications of nanotechnology in different sectors. Profiling of these clusters revealed that, apart from various socio-demographic factors, exposure to risk-related information, rather than awareness in nanotechnology itself, resulted in respondents expressing greater concern about nanotechnology applications. The results provide evidence upon which regulatory agencies and industries can base policies regarding informed risk–benefit communication and management associated with the introduction of commercial applications of nanotechnology

Awareness on adverse effects of nanotechnology increases negative perception among public: survey study from Singapore

Energy Technology Data Exchange (ETDEWEB)

George, Saji, E-mail: saji-george@nyp.edu.sg [Nanyang Polytechnic, Centre for Sustainable Nanotechnology, School of Chemical & Life Sciences (Singapore); Kaptan, Gulbanu [Newcastle University, Food and Society Group, CRE School of Agriculture, Food and Rural Development (United Kingdom); Lee, Joel [Nanyang Polytechnic, Centre for Sustainable Nanotechnology, School of Chemical & Life Sciences (Singapore); Frewer, Lynn, E-mail: lynn.frewer@newcastle.ac.uk [Newcastle University, Food and Society Group, CRE School of Agriculture, Food and Rural Development (United Kingdom)

2014-12-15

As has been demonstrated by recent societal controversies associated with the introduction of novel technologies, societal acceptance of a technology and its applications is shaped by consumers’ perceived risks and benefits. The research reported here investigates public perceptions of nanotechnology in Singapore, where technological innovation is an established part of the economy, and it might be expected that consumer perceptions of risk are low, and those of benefit are high. The contribution of socio-demographic variables, knowledge level and exposure to risk information in shaping risk perception about nanotechnology applications within different application sectors were analysed. About ∼80 % of respondents have some understanding of nanotechnology, 60 % report having heard some negative information, and 39 % perceive nanotechnology as beneficial, while 27.5 % perceive it as risky. Nanotechnology application in food was reported to cause the most concern in the consumers included in the sample. Two-step cluster analysis of the data enabled grouping of respondents into those who expressed ‘less concern’ or ‘more concern’ based on their average scores for concern levels expressed with applications of nanotechnology in different sectors. Profiling of these clusters revealed that, apart from various socio-demographic factors, exposure to risk-related information, rather than awareness in nanotechnology itself, resulted in respondents expressing greater concern about nanotechnology applications. The results provide evidence upon which regulatory agencies and industries can base policies regarding informed risk–benefit communication and management associated with the introduction of commercial applications of nanotechnology.

Awareness on adverse effects of nanotechnology increases negative perception among public: survey study from Singapore

Science.gov (United States)

George, Saji; Kaptan, Gulbanu; Lee, Joel; Frewer, Lynn

2014-12-01

As has been demonstrated by recent societal controversies associated with the introduction of novel technologies, societal acceptance of a technology and its applications is shaped by consumers' perceived risks and benefits. The research reported here investigates public perceptions of nanotechnology in Singapore, where technological innovation is an established part of the economy, and it might be expected that consumer perceptions of risk are low, and those of benefit are high. The contribution of socio-demographic variables, knowledge level and exposure to risk information in shaping risk perception about nanotechnology applications within different application sectors were analysed. About 80 % of respondents have some understanding of nanotechnology, 60 % report having heard some negative information, and 39 % perceive nanotechnology as beneficial, while 27.5 % perceive it as risky. Nanotechnology application in food was reported to cause the most concern in the consumers included in the sample. Two-step cluster analysis of the data enabled grouping of respondents into those who expressed `less concern' or `more concern' based on their average scores for concern levels expressed with applications of nanotechnology in different sectors. Profiling of these clusters revealed that, apart from various socio-demographic factors, exposure to risk-related information, rather than awareness in nanotechnology itself, resulted in respondents expressing greater concern about nanotechnology applications. The results provide evidence upon which regulatory agencies and industries can base policies regarding informed risk-benefit communication and management associated with the introduction of commercial applications of nanotechnology.

Nanotechnology R and D Policy of Japan and Nanotechnology Support Project

International Nuclear Information System (INIS)

Kishi, Teruo

2004-01-01

In the 2nd Science and Technology Basic Plan (2001-2005), the area of nanotechnology and materials is designated one of the four prioritized areas in funding. Following this plan, Ministry of Education, Culture, Sports, Science and Technology (MEXT) and Ministry of Economy, Trade and Industries (METI), the main funding ministries, and their organizations, Japan Society for the Promotion of Science (JSPS), Japan Science and Technology Agency (JST), National Institute for Materials Science (NIMS), RIKEN, New Energy and Industrial Technology Organization (NEDO), and National Institute of Advanced Industrial Science and Technology (AIST) promotes their research programs. Besides, in order to promote interdisciplinary, interorganizational, and international collaboration of researchers, Nanotechnology Support Project (NSP) was started by MEXT in 2002. The project has two missions: informational support and common use facility support. Nanotechnology Researchers Network Center of Japan is responsible for informational support, and 14 universities and national research institutes are responsible for common use facility support

Nano Mapper: an Internet knowledge mapping system for nanotechnology development

International Nuclear Information System (INIS)

Li Xin; Hu, Daning; Dang Yan; Chen Hsinchun; Roco, Mihail C.; Larson, Catherine A.; Chan, Joyce

2009-01-01

Nanotechnology research has experienced rapid growth in recent years. Advances in information technology enable efficient investigation of publications, their contents, and relationships for large sets of nanotechnology-related documents in order to assess the status of the field. This paper presents the development of a new knowledge mapping system, called Nano Mapper (http://nanomapper.eller.arizona.eduhttp://nanomapper.eller.arizona.edu), which integrates the analysis of nanotechnology patents and research grants into a Web-based platform. The Nano Mapper system currently contains nanotechnology-related patents for 1976-2006 from the United States Patent and Trademark Office (USPTO), European Patent Office (EPO), and Japan Patent Office (JPO), as well as grant documents from the U.S. National Science Foundation (NSF) for the same time period. The system provides complex search functionalities, and makes available a set of analysis and visualization tools (statistics, trend graphs, citation networks, and content maps) that can be applied to different levels of analytical units (countries, institutions, technical fields) and for different time intervals. The paper shows important nanotechnology patenting activities at USPTO for 2005-2006 identified through the Nano Mapper system.

Nano Mapper: an Internet knowledge mapping system for nanotechnology development

Energy Technology Data Exchange (ETDEWEB)

Li Xin, E-mail: xinli@eller.arizona.edu; Hu, Daning, E-mail: hud@eller.arizona.edu; Dang Yan, E-mail: ydang@eller.arizona.edu; Chen Hsinchun, E-mail: hchen@eller.arizona.ed [University of Arizona, Departmet of Management Information Systems, Eller College of Management (United States); Roco, Mihail C., E-mail: mroco@nsf.go [National Science Foundation (United States); Larson, Catherine A., E-mail: cal@eller.arizona.edu; Chan, Joyce, E-mail: joycepchan@eller.arizona.ed [University of Arizona, Department of Management Information Systems, Eller College of Management (United States)

2009-04-15

Nanotechnology research has experienced rapid growth in recent years. Advances in information technology enable efficient investigation of publications, their contents, and relationships for large sets of nanotechnology-related documents in order to assess the status of the field. This paper presents the development of a new knowledge mapping system, called Nano Mapper (http://nanomapper.eller.arizona.eduhttp://nanomapper.eller.arizona.edu), which integrates the analysis of nanotechnology patents and research grants into a Web-based platform. The Nano Mapper system currently contains nanotechnology-related patents for 1976-2006 from the United States Patent and Trademark Office (USPTO), European Patent Office (EPO), and Japan Patent Office (JPO), as well as grant documents from the U.S. National Science Foundation (NSF) for the same time period. The system provides complex search functionalities, and makes available a set of analysis and visualization tools (statistics, trend graphs, citation networks, and content maps) that can be applied to different levels of analytical units (countries, institutions, technical fields) and for different time intervals. The paper shows important nanotechnology patenting activities at USPTO for 2005-2006 identified through the Nano Mapper system.

Nanotechnological Strategies for Biofabrication of Human Organs

Directory of Open Access Journals (Sweden)

Rodrigo A. Rezende

2012-01-01

Full Text Available Nanotechnology is a rapidly emerging technology dealing with so-called nanomaterials which at least in one dimension have size smaller than 100 nm. One of the most potentially promising applications of nanotechnology is in the area of tissue engineering, including biofabrication of 3D human tissues and organs. This paper focused on demonstrating how nanomaterials with nanolevel size can contribute to development of 3D human tissues and organs which have macrolevel organization. Specific nanomaterials such as nanofibers and nanoparticles are discussed in the context of their application for biofabricating 3D human tissues and organs. Several examples of novel tissue and organ biofabrication technologies based on using novel nanomaterials are presented and their recent limitations are analyzed. A robotic device for fabrication of compliant composite electrospun vascular graft is described. The concept of self-assembling magnetic tissue spheroids as an intermediate structure between nano- and macrolevel organization and building blocks for biofabrication of complex 3D human tissues and organs is introduced. The design of in vivo robotic bioprinter based on this concept and magnetic levitation of tissue spheroids labeled with magnetic nanoparticles is presented. The challenges and future prospects of applying nanomaterials and nanotechnological strategies in organ biofabrication are outlined.

The structure and infrastructure of the global nanotechnology literature

International Nuclear Information System (INIS)

Kostoff, Ronald N.; Stump, Jesse A.; Johnson, Dustin; Murday, James S.; Lau, Clifford G.Y.; Tolles, William M.

2006-01-01

Text mining is the extraction of useful information from large volumes of text. A text mining analysis of the global open nanotechnology literature was performed. Records from the Science Citation Index (SCI)/Social SCI were analyzed to provide the infrastructure of the global nanotechnology literature (prolific authors/journals/institutions/countries, most cited authors/papers/journals) and the thematic structure (taxonomy) of the global nanotechnology literature, from a science perspective. Records from the Engineering Compendex (EC) were analyzed to provide a taxonomy from a technology perspective.The Far Eastern countries have expanded nanotechnology publication output dramatically in the past decade.The Peoples Republic of China ranks second to the USA (2004 results) in nanotechnology papers published in the SCI, and has increased its nanotechnology publication output by a factor of 21 in a decade.Of the six most prolific (publications) nanotechnology countries, the three from the Western group (USA, Germany, France) have about eight percent more nanotechnology publications (for 2004) than the three from the Far Eastern group (China, Japan, South Korea).While most of the high nanotechnology publication-producing countries are also high nanotechnology patent producers in the US Patent Office (as of 2003), China is a major exception. China ranks 20th as a nanotechnology patent-producing country in the US Patent Office

The structure and infrastructure of the global nanotechnology literature

Energy Technology Data Exchange (ETDEWEB)

Kostoff, Ronald N., E-mail: kostofr@onr.navy.mil; Stump, Jesse A. [Office of Naval Research (United States); Johnson, Dustin [Northrop Grumman TASC (United States); Murday, James S. [Naval Research Laboratory, Chemistry Division, Code 6100 (United States); Lau, Clifford G.Y. [Institute for Defense Analyses (United States); Tolles, William M

2006-08-15

Text mining is the extraction of useful information from large volumes of text. A text mining analysis of the global open nanotechnology literature was performed. Records from the Science Citation Index (SCI)/Social SCI were analyzed to provide the infrastructure of the global nanotechnology literature (prolific authors/journals/institutions/countries, most cited authors/papers/journals) and the thematic structure (taxonomy) of the global nanotechnology literature, from a science perspective. Records from the Engineering Compendex (EC) were analyzed to provide a taxonomy from a technology perspective.The Far Eastern countries have expanded nanotechnology publication output dramatically in the past decade.The Peoples Republic of China ranks second to the USA (2004 results) in nanotechnology papers published in the SCI, and has increased its nanotechnology publication output by a factor of 21 in a decade.Of the six most prolific (publications) nanotechnology countries, the three from the Western group (USA, Germany, France) have about eight percent more nanotechnology publications (for 2004) than the three from the Far Eastern group (China, Japan, South Korea).While most of the high nanotechnology publication-producing countries are also high nanotechnology patent producers in the US Patent Office (as of 2003), China is a major exception. China ranks 20th as a nanotechnology patent-producing country in the US Patent Office.

Food neophobia, nanotechnology and satisfaction with life

DEFF Research Database (Denmark)

Schnettler, Berta; Crisóstomo, Gloria; Sepúlveda, José

2013-01-01

This study investigates the relationship between food neophobia, satisfaction with life and food-related life, and acceptance of the use of nanotechnology in food production. Questionnaire data was collected from a sample of 400 supermarket shoppers in southern Chile. The questionnaire measured...... knowledge of nanotechnology and willingness to purchase food products involving nanotechnology, and included the SWLS (Satisfaction with Life Scale), SWFL (Satisfaction with Foodrelated Life) and FNS (Food Neophobia Scale) scales. Using cluster analysis, four consumer types were distinguished...... with significant differences in their scores on the SWLS, SWFL and FNS. The types differed in their knowledge of nanotechnology, willingness to purchase foods involving nanotechnology, age, socioeconomic level and lifestyle. The least food-neophobic type had the highest levels of satisfaction with life...

Food neophobia, nanotechnology and satisfaction with life

DEFF Research Database (Denmark)

Schnettler, Berta; Crisóstomo, Gloria; Sepúlveda, José

2013-01-01

knowledge of nanotechnology and willingness to purchase food products involving nanotechnology, and included the SWLS (Satisfaction with Life Scale), SWFL (Satisfaction with Foodrelated Life) and FNS (Food Neophobia Scale) scales. Using cluster analysis, four consumer types were distinguished......This study investigates the relationship between food neophobia, satisfaction with life and food-related life, and acceptance of the use of nanotechnology in food production. Questionnaire data was collected from a sample of 400 supermarket shoppers in southern Chile. The questionnaire measured...... with significant differences in their scores on the SWLS, SWFL and FNS. The types differed in their knowledge of nanotechnology, willingness to purchase foods involving nanotechnology, age, socioeconomic level and lifestyle. The least food-neophobic type had the highest levels of satisfaction with life...

Direct AFM observation of an opening event of a DNA cuboid constructed via a prism structure.

Science.gov (United States)

Endo, Masayuki; Hidaka, Kumi; Sugiyama, Hiroshi

2011-04-07

A cuboid structure was constructed using a DNA origami design based on a square prism structure. The structure was characterized by atomic force microscopy (AFM) and dynamic light scattering. The real-time opening event of the cuboid was directly observed by high-speed AFM.

EDITORIAL: Nanotechnology under the skin Nanotechnology under the skin

Science.gov (United States)

Demming, Anna

2011-07-01

Concerns over health and ecological implications as living organisms are increasingly exposed to nanoparticles are constantly raised. Yet the use of nanoscale structures in technology and medicine has already infiltrated daily life in countless ways. from cosmetics and sun cream to mobile phones. The potential of nanotechnology in medicine is particularly difficult to ignore and ranges from cancer treatment to immune system activation [1]. The reduced dimensions of nanostructures lend them to targeted diagnostic and therapeutic practices that enable treatment with greater accuracy and less discomfort. Striking a balance between over caution and recklessness can be tricky, and provides an additional drive to investigate and learn more about the science of the nanoscale. Alongside investigations to exploit nanoparticles in medicine and technology, there have been a substantial number of studies to investigate the possible effects on our health, as well as some studies on the environmental ramifications. Researchers in the US have investigated the effects on aquatic life of ZnO nanoparticles, which may pollute lakes and rivers through accidental release during fabrication or as wash out from consumer materials [2]. The study is focused on zebrafish during early development. Zhu et al observe that while there may be evidence that Zn2+ ions and ZnO nanoparticles have toxic effects on zebrafish embryos, these effects are apparently mitigated by a type of sediment formulated from the nanoparticles. The positive contribution of nanotechnology in cancer treatment is an area of particularly high research activity at present. Although traditional chemotherapeutic agents can be effective against the growth of cancerous cells, they can have a detrimental effect on the immune system, which is critical in combating cancer. Researchers in China studied the behaviour of C60(OH)20 nanoparticles in vivo and found that they play important roles in the anti-tumour process by activating

NANOTECHNOLOGY APPLICATIONS IN AGRICULTURE: AN UPDATE

OpenAIRE

Tejpal Dhewa

2015-01-01

Although the scientific studies on the applications of nanotechnology in the agriculture are less than a decade old yet the prospects of nanotechnology in this field has been considerable. The rapid developments in the nanosciences have a great impact on agricultural practices and food manufacturing industries. Nanotechnology has an enormous potential to offer smarter, stronger, cost-effective packaging materials, biosensors for the rapid detection of the food pathogens, toxins and other cont...

Inventory of nanotechnology companies in Mexico

International Nuclear Information System (INIS)

Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

2016-01-01

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications

Inventory of nanotechnology companies in Mexico

Science.gov (United States)

Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

2016-02-01

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

Inventory of nanotechnology companies in Mexico

Energy Technology Data Exchange (ETDEWEB)

Appelbaum, Richard, E-mail: rich@global.ucsb.edu [University of California at Santa Barbara, MacArthur Foundation Chair in Sociology and Global & International Studies Co-PI, Center for Nanotechnology and Society, Social Science and Media Studies 2103 (United States); Zayago Lau, Edgar [Center for Research and Advanced Studies of the National Polytechnic Institute (CINVESTAV, Zacatenco)., Multidisciplinary Graduate Programs (Mexico); Foladori, Guillermo [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico); Parker, Rachel [Canadian Institute for Advanced Research, Research Programs (Canada); Vazquez, Laura Liliana Villa [Universidad Autónoma de Zacatecas (Mexico); Belmont, Eduardo Robles [UNAM, Institute for Research in Applied Mathematics and Systems (IIMAS) (Mexico); Figueroa, Edgar Ramón Arteaga [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico)

2016-02-15

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

Nanotechnology tools in pharmaceutical R&D

OpenAIRE

Challa S.S.R. Kumar

2010-01-01

Nanotechnology is a new approach to problem solving and can be considered as a collection of tools and ideas which can be applied in pharmaceutical industry. Application of nanotechnology tools in pharmaceutical R&D is likely to result in moving the industry from ‘blockbuster drug’ model to ‘personalized medicine’. There are compelling applications in pharmaceutical industry where inexpensive nanotechnology tools can be utilized. The review explores the possibility of categorizing various nan...

Nanotechnology in corneal neovascularization therapy--a review.

Science.gov (United States)

Gonzalez, Lilian; Loza, Raymond J; Han, Kyu-Yeon; Sunoqrot, Suhair; Cunningham, Christy; Purta, Patryk; Drake, James; Jain, Sandeep; Hong, Seungpyo; Chang, Jin-Hong

2013-03-01

Nanotechnology is an up-and-coming branch of science that studies and designs materials with at least one dimension sized from 1-100 nm. These nanomaterials have unique functions at the cellular, atomic, and molecular levels. The term "nanotechnology" was first coined in 1974. Since then, it has evolved dramatically and now consists of distinct and independent scientific fields. Nanotechnology is a highly studied topic of interest, as nanoparticles can be applied to various fields ranging from medicine and pharmacology, to chemistry and agriculture, to environmental science and consumer goods. The rapidly evolving field of nanomedicine incorporates nanotechnology with medical applications, seeking to give rise to new diagnostic means, treatments, and tools. Over the past two decades, numerous studies that underscore the successful fusion of nanotechnology with novel medical applications have emerged. This has given rise to promising new therapies for a variety of diseases, especially cancer. It is becoming abundantly clear that nanotechnology has found a place in the medical field by providing new and more efficient ways to deliver treatment. Ophthalmology can also stand to benefit significantly from the advances in nanotechnology research. As it relates to the eye, research in the nanomedicine field has been particularly focused on developing various treatments to prevent and/or reduce corneal neovascularization among other ophthalmologic disorders. This review article aims to provide an overview of corneal neovascularization, currently available treatments, and where nanotechnology comes into play.

Public perceptions about nanotechnology: Risks, benefits and trust

International Nuclear Information System (INIS)

Cobb, Michael D.; Macoubrie, Jane

2004-01-01

We report data from the first representative national phone survey of Americans' perceptions about nanotechnology (N =1536). Public opinion about nanotechnology is in its infancy, and knowledge about it is quite limited. Yet, Americans' initial reaction to nanotechnology is thus far generally positive, probably rooted in a generally positive view of science overall. Survey respondents expected benefits of nanotechnology to be more prevalent than risks, and they reported feeling hopeful about nanotechnology rather than worried. Their most preferred potential benefit of nanotechnology is 'new and better ways to detect and treat human diseases,' and they identified 'losing personal privacy to tiny new surveillance devices' as the most important potential risk to avoid. The most discouraging aspect to the data is respondents' lack of trust in business leaders to minimize nanotechnology risks to human health. Overall, these data indicate that while Americans do not necessarily presume benefits and the absence of risks, their outlook is much more positive than not

Public perceptions about nanotechnology: Risks, benefits and trust

Energy Technology Data Exchange (ETDEWEB)

Cobb, Michael D.; Macoubrie, Jane [North Carolina State University, Department of Political Science (United States)

2004-08-15

We report data from the first representative national phone survey of Americans' perceptions about nanotechnology (N =1536). Public opinion about nanotechnology is in its infancy, and knowledge about it is quite limited. Yet, Americans' initial reaction to nanotechnology is thus far generally positive, probably rooted in a generally positive view of science overall. Survey respondents expected benefits of nanotechnology to be more prevalent than risks, and they reported feeling hopeful about nanotechnology rather than worried. Their most preferred potential benefit of nanotechnology is 'new and better ways to detect and treat human diseases,' and they identified 'losing personal privacy to tiny new surveillance devices' as the most important potential risk to avoid. The most discouraging aspect to the data is respondents' lack of trust in business leaders to minimize nanotechnology risks to human health. Overall, these data indicate that while Americans do not necessarily presume benefits and the absence of risks, their outlook is much more positive than not.

Simultaneous AFM and fluorescence imaging: A method for aligning an AFM-tip with an excitation beam using a 2D galvanometer

Science.gov (United States)

Moores, A. N.; Cadby, A. J.

2018-02-01

Correlative fluorescence and atomic force microscopy (AFM) imaging is a highly attractive technique for use in biological imaging, enabling force and mechanical measurements of particular structures whose locations are known due to the specificity of fluorescence imaging. The ability to perform these two measurements simultaneously (rather than consecutively with post-processing correlation) is highly valuable because it would allow the mechanical properties of a structure to be tracked over time as changes in the sample occur. We present an instrument which allows simultaneous AFM and fluorescence imaging by aligning an incident fluorescence excitation beam with an AFM-tip. Alignment was performed by calibrating a 2D galvanometer present in the excitation beam path and using it to reposition the incident beam. Two programs were developed (one manual and one automated) which correlate sample features between the AFM and fluorescence images, calculating the distance required to translate the incident beam towards the AFM-tip. Using this method, we were able to obtain beam-tip alignment (and therefore field-of-view alignment) from an offset of >15 μm to within one micron in two iterations of the program. With the program running alongside data acquisition for real-time feedback between AFM and optical images, this offset was maintained over a time period of several hours. Not only does this eliminate the need to image large areas with both techniques to ensure that fields-of-view overlap, but it also raises the possibility of using this instrument for tip-enhanced fluorescence applications, a technique in which super-resolution images have previously been achieved.

Hearts and minds and nanotechnology

Science.gov (United States)

Toumey, Chris

2009-03-01

New research by social scientists is presenting a clearer picture of the factors that influence the public perception of nanotechnology and, as Chris Toumey reports, the results present challenges for those working to increase public acceptance of nanoscience and technology.See focus on public perceptions of nanotechnology.

The applications of nanotechnology in food industry.

Science.gov (United States)

Rashidi, Ladan; Khosravi-Darani, Kianoush

2011-09-01

Nanotechnology has the potential of application in the food industry and processing as new tools for pathogen detection, disease treatment delivery systems, food packaging, and delivery of bioactive compounds to target sites. The application of nanotechnology in food systems will provide new methods to improve safety and the nutritional value of food products. This article will review the current advances of applications of nanotechnology in food science and technology. Also, it describes new current food laws for nanofood and novel articles in the field of risk assessment of using nanotechnology in the food industry.

Continuous AFM observation of martensitic transformation and its reversion in training cycles of Fe-Mn-Si based shape memory alloys

International Nuclear Information System (INIS)

Liu, D.Z.; Kikuchi, T.; Kajiwara, S.; Shinya, N.

2000-01-01

The effect of thermomechanical treatment (so-called ''training'') cycles on stress-induced martensitic transformation and its reversion has been studied by atomic force microscopy (AFM) to make clear the origin of improvement of shape memory effect (SME) due to training in Fe-Mn-Si based shape memory alloys (SMAs). It was found that training cycles make martensite plates tend to grow on the primary shear system, i.e., on the most favorable shear system for the fcc to hcp martensitic transformation. In addition, training cycles lead to a more uniform distribution of thin martensite plates in a grain. Martensitic plates with the above characteristics are easier to be reverted back to parent phase when heated, and then nearly perfect SME is obtained. AFM observation shows that the key factor to realize perfect SME in Fe-Mn-Si based SMAs is to produce the uniform distribution of thin martensite plates on the primary shear system when deformed by external stress. (orig.)

Nanotechnology in agri-food production: an overview

Directory of Open Access Journals (Sweden)

Sekhon BS

2014-05-01

Full Text Available Bhupinder Singh SekhonInstitute of Pharmaceutical Sciences, PCTE Group of Institutes, Ludhiana, IndiaAbstract: Nanotechnology is one of the most important tools in modern agriculture, and agri-food nanotechnology is anticipated to become a driving economic force in the near future. Agri-food themes focus on sustainability and protection of agriculturally produced foods, including crops for human consumption and animal feeding. Nanotechnology provides new agrochemical agents and new delivery mechanisms to improve crop productivity, and it promises to reduce pesticide use. Nanotechnology can boost agricultural production, and its applications include: 1 nanoformulations of agrochemicals for applying pesticides and fertilizers for crop improvement; 2 the application of nanosensors/nanobiosensors in crop protection for the identification of diseases and residues of agrochemicals; 3 nanodevices for the genetic manipulation of plants; 4 plant disease diagnostics; 5 animal health, animal breeding, poultry production; and 6 postharvest management. Precision farming techniques could be used to further improve crop yields but not damage soil and water, reduce nitrogen loss due to leaching and emissions, as well as enhance nutrients long-term incorporation by soil microorganisms. Nanotechnology uses include nanoparticle-mediated gene or DNA transfer in plants for the development of insect-resistant varieties, food processing and storage, nanofeed additives, and increased product shelf life. Nanotechnology promises to accelerate the development of biomass-to-fuels production technologies. Experts feel that the potential benefits of nanotechnology for agriculture, food, fisheries, and aquaculture need to be balanced against concerns for the soil, water, and environment and the occupational health of workers. Raising awareness of nanotechnology in the agri-food sector, including feed and food ingredients, intelligent packaging and quick-detection systems, is

Nanotechnology based approaches for detection and delivery of microRNA in healthcare and crop protection.

Science.gov (United States)

Chaudhary, Vrantika; Jangra, Sumit; Yadav, Neelam R

2018-04-13

Nanobiotechnology has the potential to revolutionize diverse sectors including medicine, agriculture, food, textile and pharmaceuticals. Disease diagnostics, therapeutics and crop protection strategies are fast emerging using nanomaterials preferably nanobiomaterials. It has potential for development of novel nanobiomolecules which offer several advantages over conventional treatment methods. RNA nanoparticles with many unique features are promising candidates in disease treatment. The miRNAs are involved in many biochemical and developmental pathways and their regulation in plants and animals. These appear to be a powerful tool for controlling various pathological diseases in human, plants and animals, however there are challenges associated with miRNA based nanotechnology. Several advancements made in the field of miRNA therapeutics make it an attractive approach, but a lot more has to be explored in nanotechnology assisted miRNA therapy. The miRNA based technologies can be employed for detection and combating crop diseases as well. Despite these potential advantages, nanobiotechnology applications in the agricultural sector are still in its infancy and have not yet made its mark in comparison with healthcare sector. The review provides a platform to discuss nature, role and use of miRNAs in nanobiotechnology applications.

An AFM-SIMS Nano Tomography Acquisition System

Science.gov (United States)

Swinford, Richard William

An instrument, adding the capability to measure 3D volumetric chemical composition, has been constructed by me as a member of the Sanchez Nano Laboratory. The laboratory's in situ atomic force microscope (AFM) and secondary ion mass spectrometry systems (SIMS) are functional and integrated as one instrument. The SIMS utilizes a Ga focused ion beam (FIB) combined with a quadrupole mass analyzer. The AFM is comprised of a 6-axis stage, three coarse axes and three fine. The coarse stage is used for placing the AFM tip anywhere inside a (13x13x5 mm3) (xyz) volume. Thus the tip can be moved in and out of the FIB processing region with ease. The planned range for the Z-axis piezo was 60 microm, but was reduced after it was damaged from arc events. The repaired Z-axis piezo is now operated at a smaller nominal range of 18 microm (16.7 microm after pre-loading), still quite respectable for an AFM. The noise floor of the AFM is approximately 0.4 nm Rq. The voxel size for the combined instrument is targeted at 50 nm or larger. Thus 0.4 nm of xyz uncertainty is acceptable. The instrument has been used for analyzing samples using FIB beam currents of 250 pA and 5.75 nA. Coarse tip approaches can take a long time so an abbreviated technique is employed. Because of the relatively long thro of the Z piezo, the tip can be disengaged by deactivating the servo PID. Once disengaged, it can be moved laterally out of the way of the FIB-SIMS using the coarse stage. This instrument has been used to acquire volumetric data on AlTiC using AFM tip diameters of 18.9 nm and 30.6 nm. Acquisition times are very long, requiring multiple days to acquire a 50-image stack. New features to be added include auto stigmation, auto beam shift, more software automation, etc. Longer term upgrades to include a new lower voltage Z-piezo with strain-gauge feedback and a new design to extend the life for the coarse XY nano-positioners. This AFM-SIMS instrument, as constructed, has proven to be a great proof

Nanotechnology policy in Korea for sustainable growth

International Nuclear Information System (INIS)

So, Dae Sup; Kim, Chang Woo; Chung, Pil Seung; Jhon, Myung S.

2012-01-01

Korea has become one of the leading countries in nanotechnology along with the U.S., Japan, and Germany. Since 2001, the Korean Government established the “Nanotechnology Development Plan.” Since then, the trend in nanotechnology is steadily changing from fundamental research to application-driven technologies. In this paper, we examine the nanotechnology development and policy during the past decade, which includes the investments in R and D, infrastructure, and education. The Third Phase (2011–2020) on clean nanotechnology convergence and integration in information, energy, and the environmental sector is also given. Furthermore, the program on long-term strategy dealing with sustainability in resolving future societal demand and plans for sustainable energy and environmental activities will be discussed in depth. The outcomes and national evaluations of research and education are also given.

Investigating bioconjugation by atomic force microscopy

Science.gov (United States)

2013-01-01

Nanotechnological applications increasingly exploit the selectivity and processivity of biological molecules. Integration of biomolecules such as proteins or DNA into nano-systems typically requires their conjugation to surfaces, for example of carbon-nanotubes or fluorescent quantum dots. The bioconjugated nanostructures exploit the unique strengths of both their biological and nanoparticle components and are used in diverse, future oriented research areas ranging from nanoelectronics to biosensing and nanomedicine. Atomic force microscopy imaging provides valuable, direct insight for the evaluation of different conjugation approaches at the level of the individual molecules. Recent technical advances have enabled high speed imaging by AFM supporting time resolutions sufficient to follow conformational changes of intricately assembled nanostructures in solution. In addition, integration of AFM with different spectroscopic and imaging approaches provides an enhanced level of information on the investigated sample. Furthermore, the AFM itself can serve as an active tool for the assembly of nanostructures based on bioconjugation. AFM is hence a major workhorse in nanotechnology; it is a powerful tool for the structural investigation of bioconjugation and bioconjugation-induced effects as well as the simultaneous active assembly and analysis of bioconjugation-based nanostructures. PMID:23855448

GaN-Based Multiple-Quantum-Well Light-Emitting Diodes Employing Nanotechnology for Photon Management

KAUST Repository

Hsiao, Yu Hsuan

2015-03-01

Nanostructures have been proved to be an efficient way of modifying/improving the performance of GaN-based light-emitting diodes (LEDs). The achievements in photon management include strain relaxation, light extraction enhancement, radiation pattern control, and white-light devices. In this paper, we discuss the impact and the underlying physics of applying nanotechnology on LEDs. A variety of nanostructures are introduced, as well as the fabrication techniques. © 1972-2012 IEEE.

Nanotechnology overview: Opportunities and challenges

Science.gov (United States)

Nanotechnology can be defined as the science of manipulating matter at the nanometer scale in order to discover new properties and possibly produce new products. For the past 30 years, a considerable amount of scientific interest and R&D funding devoted to nanotechnology has led to rapid developmen...

Nanotechnology: From "Wow" to "Yuck"?

Science.gov (United States)

Kulinowski, Kristen

2004-01-01

Nanotechnology is science and engineering resulting from the manipulation of matter's most basic building blocks: atoms and molecules. As such, nanotechnology promises unprecedented control over both the materials we use and the means of their production. Such control could revolutionize nearly every sector of our economy, including medicine,…

Taking nanotechnology to schools

OpenAIRE

Lakhtakia, Akhlesh

2005-01-01

After a primer on nanotechnology and a review of current educational practices in secondary schools, the concept of just-in-time education is proposed to integrate technosciences and humanities so that both future technoscientists and non-technoscientists develop a common understanding, possibly even a common language, to deal with social, ethical, legal, and political issues that arise from the development of nanotechnology and its convergence with other technoscientific developments.

DNA nanotechnology

Science.gov (United States)

Seeman, Nadrian C.; Sleiman, Hanadi F.

2018-01-01

DNA is the molecule that stores and transmits genetic information in biological systems. The field of DNA nanotechnology takes this molecule out of its biological context and uses its information to assemble structural motifs and then to connect them together. This field has had a remarkable impact on nanoscience and nanotechnology, and has been revolutionary in our ability to control molecular self-assembly. In this Review, we summarize the approaches used to assemble DNA nanostructures and examine their emerging applications in areas such as biophysics, diagnostics, nanoparticle and protein assembly, biomolecule structure determination, drug delivery and synthetic biology. The introduction of orthogonal interactions into DNA nanostructures is discussed, and finally, a perspective on the future directions of this field is presented.

Nanotechnology in agri-food production: an overview

Science.gov (United States)

Sekhon, Bhupinder Singh

2014-01-01

Nanotechnology is one of the most important tools in modern agriculture, and agri-food nanotechnology is anticipated to become a driving economic force in the near future. Agri-food themes focus on sustainability and protection of agriculturally produced foods, including crops for human consumption and animal feeding. Nanotechnology provides new agrochemical agents and new delivery mechanisms to improve crop productivity, and it promises to reduce pesticide use. Nanotechnology can boost agricultural production, and its applications include: 1) nanoformulations of agrochemicals for applying pesticides and fertilizers for crop improvement; 2) the application of nanosensors/nanobiosensors in crop protection for the identification of diseases and residues of agrochemicals; 3) nanodevices for the genetic manipulation of plants; 4) plant disease diagnostics; 5) animal health, animal breeding, poultry production; and 6) postharvest management. Precision farming techniques could be used to further improve crop yields but not damage soil and water, reduce nitrogen loss due to leaching and emissions, as well as enhance nutrients long-term incorporation by soil microorganisms. Nanotechnology uses include nanoparticle-mediated gene or DNA transfer in plants for the development of insect-resistant varieties, food processing and storage, nanofeed additives, and increased product shelf life. Nanotechnology promises to accelerate the development of biomass-to-fuels production technologies. Experts feel that the potential benefits of nanotechnology for agriculture, food, fisheries, and aquaculture need to be balanced against concerns for the soil, water, and environment and the occupational health of workers. Raising awareness of nanotechnology in the agri-food sector, including feed and food ingredients, intelligent packaging and quick-detection systems, is one of the keys to influencing consumer acceptance. On the basis of only a handful of toxicological studies, concerns have

Patent, Nanotechnology, and the Role of University

OpenAIRE

Sardjono, Agus

2011-01-01

University has significant contribution tot the development of nanotechnology, The role of university can be implemented through the TTLO, particulary in an effort to build a bridge for bottom-up nanotechnology for commercial purposes. There will be an increasingly significant link betweent the patent system on the university role in the development of nanotechnology.

Nanotechnology-Based Drug Delivery Systems for Treatment of Tuberculosis--A Review.

Science.gov (United States)

da Silva, Patricia Bento; de Freitas, Eduardo Sinésio; Bernegossi, Jessica; Gonçalez, Maíra Lima; Sato, Mariana Rillo; Leite, Clarice Queico Fujimura; Pavan, Fernando Rogério; Chorilli, Marlus

2016-02-01

Tuberculosis (TB) is an infectious and transmissible disease that is caused by Mycobacterium tuberculosis and primarily affects the lungs, although it can affect other organs and systems. The pulmonary presentation of TB, in addition to being more frequent, is also the most relevant to public health because it is primarily responsible for the transmission of the disease. The to their low World Health Organization (WHO) recommends a combined therapeutic regimen of several drugs, such as rifampicin (RIF), isoniazid (INH), pyrazinamide (PZA) and ethambutol (ETB). These drugs have low plasma levels after oral administration, due to their low water solubility, poor permeability and ability to be rapidly metabolized by the liver and at high concentrations. Furthermore, they have short t₁/₂ (only 1-4 hours) indicating a short residence in the plasma and the need for multiple high doses, which can result in neurotoxicity and hepatotoxicity. Nanotechnology drug delivery systems have considerable potential for the treatment of TB. The systems can also be designed to allow for the sustained release of drugs from the matrix and drug delivery to a specific target. These properties of the systems enable the improvement of the bioavailability of drugs, can reduce the dosage and frequency of administration, and may solve the problem of non-adherence to prescribed therapy, which is a major obstacle to the control of TB. The purpose of this study was to systematically review nanotechnology-based drug delivery systems for the treatment of TB.

NASA Applications of Molecular Nanotechnology

Science.gov (United States)

Globus, Al; Bailey, David; Han, Jie; Jaffe, Richard; Levit, Creon; Merkle, Ralph; Srivastava, Deepak

1998-01-01

Laboratories throughout the world are rapidly gaining atomically precise control over matter. As this control extends to an ever wider variety of materials, processes and devices, opportunities for applications relevant to NASA's missions will be created. This document surveys a number of future molecular nanotechnology capabilities of aerospace interest. Computer applications, launch vehicle improvements, and active materials appear to be of particular interest. We also list a number of applications for each of NASA's enterprises. If advanced molecular nanotechnology can be developed, almost all of NASA's endeavors will be radically improved. In particular, a sufficiently advanced molecular nanotechnology can arguably bring large scale space colonization within our grasp.

A study of AFM-based scratch process on polycarbonate surface and grating application

International Nuclear Information System (INIS)

Choi, Chul Hyun; Lee, Dong Jin; Sung, Jun-Ho; Lee, Min Woo; Lee, Seung-Gol; Park, Se-Geun; Lee, El-Hang; O, Beom-Hoan

2010-01-01

We report on the possibility of applying atomic force microscope (AFM) lithography to draw micro/nano-structures on the surface of a polycarbonate (PC) substrate. We also fabricated a grating structure on the PC surface using the scratch method. An AFM silicon tip coated with a diamond layer was utilized as a cutting tool to scratch the surface of the sample. In order to obtain pattern depth deeper than the control method of interaction force, we used a scanner movement method which the sample scanner moves along the Z-axis. A grating of 100 μm x 150 μm was fabricated by the step and repeat method wherein the sample stage is moved in the direction of the XY-axis. The period and the depth of the grating are 500 and 50 nm, respectively. Light of 632.8 nm wavelength was diffracted on the surface of the PC substrate.

Nanotechnology and Secondary Science Teacher's Self-Efficacy

Science.gov (United States)

Cox, Elena K.

The recommendations of the United States President's Council of Advisors on Science and Technology and the multi-agency National Nanotechnology Initiative (NNI) identified the need to prepare the workforce and specialists in the field of nanotechnology in order for the United States to continue to compete in the global marketplace. There is a lack of research reported in recent literature on the readiness of secondary science teachers to introduce higher level sciences---specifically nanotechnology---in their classes. The central research question of this study examined secondary science teachers' beliefs about teaching nanotechnology comfortably, effectively, and successfully. Bandura's self-efficacy theory provided the conceptual framework for this phenomenological study. A data analysis rubric was used to identify themes and patterns that emerged from detailed descriptions during in-depth interviews with 15 secondary science teachers. The analysis revealed the shared, lived experiences of teachers and their beliefs about their effectiveness and comfort in teaching higher-level sciences, specifically nanotechnology. The results of the study indicated that, with rare exceptions, secondary science teachers do not feel comfortable or effective, nor do they believe they have adequate training to teach nanotechnology concepts to their students. These teachers believed they were not prepared or trained in incorporating these higher level science concepts in the curriculum. Secondary science teachers' self-efficacy and personal beliefs of effectiveness in teaching nanotechnology can be an important component in achieving a positive social change by helping to familiarize high school students with nanotechnology and how it can benefit society and the future of science.

Immobilizing live Escherichia coli for AFM studies of surface dynamics

International Nuclear Information System (INIS)

Lonergan, N.E.; Britt, L.D.; Sullivan, C.J.

2014-01-01

Atomic force microscopy (AFM) is a probe-based technique that permits high resolution imaging of live bacterial cells. However, stably immobilizing cells to withstand the probe-based lateral forces remains an obstacle in AFM mediated studies, especially those of live, rod shaped bacteria in nutrient media. Consequently, AFM has been under-utilized in the research of bacterial surface dynamics. The aim of the current study was to immobilize a less adherent Escherichia coli strain in a method that both facilitates AFM imaging in nutrient broth and preserves overall cell viability. Immobilization reagents and buffers were systematically evaluated and the cell membrane integrity was monitored in all sample preparations. As expected, the biocompatible gelatin coated surfaces facilitated stable cell attachment in lower ionic strength buffers, yet poorly immobilized cells in higher ionic strength buffers. In comparison, poly-L-lysine surfaces bound cells in both low and high ionic strength buffers. The benefit of the poly-L-lysine binding capacity was offset by the compromised membrane integrity exhibited by cells on poly-L-lysine surfaces. However, the addition of divalent cations and glucose to the immobilization buffer was found to mitigate this unfavorable effect. Ultimately, immobilization of E. coli cells on poly-L-lysine surfaces in a lower ionic strength buffer supplemented with Mg 2+ and Ca 2+ was determined to provide optimal cell attachment without compromising the overall cell viability. Cells immobilized in this method were stably imaged in media through multiple division cycles. Furthermore, permeability assays indicated that E. coli cells recover from the hypoosmotic stress caused by immobilization in low ionic strength buffers. Taken together, this data suggests that stable immobilization of viable cells on poly-L-lysine surfaces can be accomplished in lower ionic strength buffers that are supplemented with divalent cations for membrane stabilization while

Nanotechnology in the Chemical Industry - Opportunities and Challenges

International Nuclear Information System (INIS)

Qian Qiuzhao; Boxman, Arthur; Chowdhry, Uma

2003-01-01

The traditional chemical industry has become a largely mature industry with many commodity products based on established technologies. Therefore, new product and market opportunities will more likely come from speciality chemicals, and from new functionalities obtained from new processing technologies as well as new microstructure control methodologies. It is a well-known fact that in addition to its molecular structure, the microstructure of a material is key to determining its properties. Controlling structures at the micro- and nano-levels is therefore essential to new discoveries. For this article, we define nanotechnology as the controlled manipulation of nanomaterials with at least one dimension less than 100nm.Nanotechnology is emerging as one of the principal areas of investigation that is integrating chemistry and materials science, and in some cases integrating these with biology to create new and yet undiscovered properties that can be exploited to gain new market opportunities. In this article market opportunities for nanotechnology will be presented from an industrial perspective covering electronic, biomedical, performance materials, and consumer products. Manufacturing technology challenges will be identified, including operations ranging from particle formation, coating, dispersion, to characterization, modeling, and simulation. Finally, a nanotechnology innovation roadmap is proposed wherein the interplay between the development of nanoscale building blocks, product design, process design, and value chain integration is identified. A suggestion is made for an R and D model combining market pull and technology push as a way to quickly exploit the advantages in nanotechnology and translate these into customer benefits

Nanotechnology - An emerging technology

Science.gov (United States)

Buckingham, D.

2007-01-01

The science of nanotechnology is still in its infancy. However, progress is being made in research and development of potential beneficial properties of nanomaterials that could play an integral part in the development of new and changing uses for mineral commodities. Nanotechnology is a kind of toolbox that allows industry to make nanomaterials and nanostructures with special properties. New nanotechnology applications of mineral commodities in their nanoscale form are being discovered, researched and developed. At the same time, there is continued research into environmental, human health and safety concerns that inherently arise from the development of a new technology. Except for a few nanomaterials (CNTs, copper, silver and zinc oxide), widespread applications are hampered by processing and suitable commercial-scale production techniques, high manufacturing costs, product price, and environmental, and human health and safety concerns. Whether nanotechnology causes a tidal wave of change or is a long-term evolutionary process of technology, new applications of familiar mineral commodities will be created. As research and development continues, the ability to manipulate matter at the nanoscale into increasingly sophisticated nanomaterials will improve and open up new possibilities for industry that will change the flow and use of mineral commodities and the materials and products that are used.

Nanotechnology for chemical engineers

CERN Document Server

Salaheldeen Elnashaie, Said; Hashemipour Rafsanjani, Hassan

2015-01-01

The book describes the basic principles of transforming nano-technology into nano-engineering with a particular focus on chemical engineering fundamentals. This book provides vital information about differences between descriptive technology and quantitative engineering for students as well as working professionals in various fields of nanotechnology. Besides chemical engineering principles, the fundamentals of nanotechnology are also covered along with detailed explanation of several specific nanoscale processes from chemical engineering point of view. This information is presented in form of practical examples and case studies that help the engineers and researchers to integrate the processes which can meet the commercial production. It is worth mentioning here that, the main challenge in nanostructure and nanodevices production is nowadays related to the economic point of view. The uniqueness of this book is a balance between important insights into the synthetic methods of nano-structures and nanomaterial...

Nanotechnology in Radiation Oncology

Science.gov (United States)

Wang, Andrew Z.; Tepper, Joel E.

2014-01-01

Nanotechnology, the manipulation of matter on atomic and molecular scales, is a relatively new branch of science. It has already made a significant impact on clinical medicine, especially in oncology. Nanomaterial has several characteristics that are ideal for oncology applications, including preferential accumulation in tumors, low distribution in normal tissues, biodistribution, pharmacokinetics, and clearance, that differ from those of small molecules. Because these properties are also well suited for applications in radiation oncology, nanomaterials have been used in many different areas of radiation oncology for imaging and treatment planning, as well as for radiosensitization to improve the therapeutic ratio. In this article, we review the unique properties of nanomaterials that are favorable for oncology applications and examine the various applications of nanotechnology in radiation oncology. We also discuss the future directions of nanotechnology within the context of radiation oncology. PMID:25113769

German innovation initiative for nanotechnology

International Nuclear Information System (INIS)

Rieke, Volker; Bachmann, Gerd

2004-01-01

In many areas of nanotechnology, Germany can count on a good knowledge basis due to its diverse activities in nanosciences. This knowledge basis, when paired with the production and sales structures needed for implementation and the internationally renowned German talent for system integration, should consequently lead to success in the marketplace. And this is exactly the field of application for the innovation initiative 'Nanotechnologie erobert Maerkte' (nanotechnology conquers markets) and for the new BMBF strategy in support of nanotechnology. Until now, aspects of nanotechnology have been advanced within the confines of their respective technical subject areas. However, the primary aim of incorporating them into an overall national strategy is to build on Germany's well-developed and internationally competitive research in science and technology to tap the potential of Germany's important industrial sectors for the application of nanotechnology through joint research projects (leading-edge innovations) that strategically target the value-added chain. This development is to be supported by government education policy to remedy a threatening shortage of skilled professionals. To realize that goal, forward-looking political policymaking must become oriented to a uniform concept of innovation, one that takes into consideration all facets of new technological advances that can contribute to a new culture of innovation in Germany. And that includes education and research policy as well as a climate that encourages and supports innovation in science, business and society

German innovation initiative for nanotechnology

Science.gov (United States)

Rieke, Volker; Bachmann, Gerd

2004-10-01

In many areas of nanotechnology, Germany can count on a good knowledge basis due to its diverse activities in nanosciences. This knowledge basis, when paired with the production and sales structures needed for implementation and the internationally renowned German talent for system integration, should consequently lead to success in the marketplace. And this is exactly the field of application for the innovation initiative "Nanotechnologie erobert Märkte" (nanotechnology conquers markets) and for the new BMBF strategy in support of nanotechnology. Until now, aspects of nanotechnology have been advanced within the confines of their respective technical subject areas. However, the primary aim of incorporating them into an overall national strategy is to build on Germany's well-developed and internationally competitive research in science and technology to tap the potential of Germany's important industrial sectors for the application of nanotechnology through joint research projects (leading-edge innovations) that strategically target the value-added chain. This development is to be supported by government education policy to remedy a threatening shortage of skilled professionals. To realize that goal, forward-looking political policymaking must become oriented to a uniform concept of innovation, one that takes into consideration all facets of new technological advances that can contribute to a new culture of innovation in Germany. And that includes education and research policy as well as a climate that encourages and supports innovation in science, business and society.

Nanotechnology-based inhalation treatments for lung cancer: state of the art

Directory of Open Access Journals (Sweden)

Ahmad J

2015-11-01

Full Text Available Javed Ahmad,1,* Sohail Akhter,2,3,* Md Rizwanullah,1 Saima Amin,1 Mahfoozur Rahman,4 Mohammad Zaki Ahmad,5 Moshahid Alam Rizvi,6 Mohammad A Kamal,7 Farhan Jalees Ahmad1,21Department of Pharmaceutics, 2Nanomedicine Research Lab, Faculty of Pharmacy, Jamia Hamdard, New Delhi, India; 3Centre de Biophysique Moléculaire(CBM-CNRS UPR4301, University of Orléans, Orléans Cedex 2, France; 4Department of Pharmaceutics, Abhilashi College of Pharmacy, Mandi, HP, India; 5Department of Pharmaceutics, College of Pharmacy, Najran University, Saudi Arabia; 6Department of Biosciences, Jamia Millia Islamia, New Delhi, India; 7Metabolomics and Enzymology Unit, King Fahd Medical Research Center, King Abdulaziz University, Jeddah, Saudi Arabia*These authors contributed equally to this workAbstract: Considering the challenges associated with conventional chemotherapy, targeted and local delivery of chemotherapeutics via nanoparticle (NP carriers to the lungs is an emerging area of interest. Recent studies and growing clinical application in cancer nanotechnology showed the huge potential of NPs as drug carriers in cancer therapy, including in lung carcinoma for diagnosis, imaging, and theranostics. Researchers have confirmed that nanotechnology-based inhalation chemotherapy is viable and more effective than conventional chemotherapy, with lesser side effects. Recently, many nanocarriers have been investigated, including liposomes, polymeric micelles, polymeric NPs, solid lipid NPs, and inorganic NPs for inhalation treatments of lung cancer. Yet, the toxicity of such nanomaterials to the lungs tissues and further distribution to other organs due to systemic absorption on inhalation delivery is a debatable concern. Here, prospect of NPs-based local lung cancer targeting through inhalation route as well as its associated challenges are discussed.Keywords: nanoparticles, lung cancer, inhalational chemotherapy, drug targeting, nanotoxicity

Nanotechnology: A Vast Field for the Creative Mind

Science.gov (United States)

Benavides, Jeannette

2003-01-01

Nanotechnology is a rapidly developing field worldwide. Nanotechnology is the development of smart systems for many different applications by building from the molecular level up. Current research, sponsored by The National Nanotechnology Alliance in the US will be described. Future needs in manpower of different disciplines will be discussed. Nanotechnology is a field of research that could allow developing countries to establish a technological infrastructure. The nature of nanotechnology requires professionals in many areas, such as engineers, chemists, physicists, mathematicians, computer scientists, materials scientists, etc. One of the materials that provide unique properties for nanotechnology is carbon nanotubes. At Goddard we have develop a process to produce nanotubes at lower costs and without metal catalysts which will be of great importance for the development of new materials for space applications and others outside NASA. Nanotechnology in general is a very broad and exciting field that will provide the technologies of tomorrow including biomedical applications for the betterment of mankind. There is room in this area for many researchers all over the world. The key is collaboration, nationally and internationally.

Nanotechnology and clean energy: sustainable utilization and supply of critical materials

International Nuclear Information System (INIS)

Fromer, Neil A.; Diallo, Mamadou S.

2013-01-01

Advances in nanoscale science and engineering suggest that many of the current problems involving the sustainable utilization and supply of critical materials in clean and renewable energy technologies could be addressed using (i) nanostructured materials with enhanced electronic, optical, magnetic and catalytic properties and (ii) nanotechnology-based separation materials and systems that can recover critical materials from non-traditional sources including mine tailings, industrial wastewater and electronic wastes with minimum environmental impact. This article discusses the utilization of nanotechnology to improve or achieve materials sustainability for energy generation, conversion and storage. We highlight recent advances and discuss opportunities of utilizing nanotechnology to address materials sustainability for clean and renewable energy technologies

Nanotechnology and clean energy: sustainable utilization and supply of critical materials

Energy Technology Data Exchange (ETDEWEB)

Fromer, Neil A., E-mail: nafromer@caltech.edu [California Institute of Technology, Resnick Sustainability Institute (United States); Diallo, Mamadou S., E-mail: diallo@wag.caltech.edu [Korea Advanced Institute of Science and Technology (KAIST), Graduate School of Energy, Environment, Water and Sustainability (EEWS) (Korea, Republic of)

2013-11-15

Advances in nanoscale science and engineering suggest that many of the current problems involving the sustainable utilization and supply of critical materials in clean and renewable energy technologies could be addressed using (i) nanostructured materials with enhanced electronic, optical, magnetic and catalytic properties and (ii) nanotechnology-based separation materials and systems that can recover critical materials from non-traditional sources including mine tailings, industrial wastewater and electronic wastes with minimum environmental impact. This article discusses the utilization of nanotechnology to improve or achieve materials sustainability for energy generation, conversion and storage. We highlight recent advances and discuss opportunities of utilizing nanotechnology to address materials sustainability for clean and renewable energy technologies.

Nanotechnology and clean energy: sustainable utilization and supply of critical materials

Science.gov (United States)

Fromer, Neil A.; Diallo, Mamadou S.

2013-11-01

Advances in nanoscale science and engineering suggest that many of the current problems involving the sustainable utilization and supply of critical materials in clean and renewable energy technologies could be addressed using (i) nanostructured materials with enhanced electronic, optical, magnetic and catalytic properties and (ii) nanotechnology-based separation materials and systems that can recover critical materials from non-traditional sources including mine tailings, industrial wastewater and electronic wastes with minimum environmental impact. This article discusses the utilization of nanotechnology to improve or achieve materials sustainability for energy generation, conversion and storage. We highlight recent advances and discuss opportunities of utilizing nanotechnology to address materials sustainability for clean and renewable energy technologies.

Nanotechnologies for sustainable construction

DEFF Research Database (Denmark)

Geiker, Mette Rica; Andersen, Maj Munch

2009-01-01

This chapter aims to highlight key aspects and recent trends in the development and application of nanotechnology to facilitate sustainable construction, use and demolition of buildings and infrastructure structures, ‘nanoconstruction’. Nanotechnology is not a technology but a very diverse...... technological field which covers many aspects. The chapter therefore seeks to provide a framework for addressing relevant issues of green nanoconstruction and to bring an overview and illustrative examples of current early developments....

The governance of nanotechnology

OpenAIRE

Jim Whitman

2007-01-01

Despite the promises made for nanotechology, its direction and momentum as it has developed to date already pose very considerable problems of regulation and control in quite fundamental ways. This article will review these difficulties under four themes. First, the principal agents for framing governance agreements (states) are also the principal proponents of nanoscience and nanotechnology. Second, the speed of new advances in nanotechnology and the reach of their implications are already o...

Nanotechnology Concepts at MSFC: Engineering Directorate

Science.gov (United States)

Bhat, Biliyar; Kaul, Raj; Shah, Sandeep; Smithers, Gweneth; Watson, Michael D.

2000-01-01

Nanotechnology is the art and science of building materials and devices at the ultimate level of finesse: atom by atom. Our nation's space program has needs for miniaturization of components, minimization of weight and maximization of performance, and nanotechnology will help us get there. MSFC - Engineering Directorate (ED) is committed to developing nanotechnology that will enable MSFC missions in space transportation, space science and space optics manufacturing. MSFC-ED has a dedicated group of technologists who are currently developing high pay-off nanotechnology concepts. This poster presentation will outline some of the concepts being developed at this time including, nanophase structural materials, carbon nanotube reinforced metal and polymer matrix composites, nanotube temperature sensors and aerogels. The poster will outline these concepts and discuss associated technical challenges in turning these concepts into real components and systems.

Advances in Nanotechnology for Restorative Dentistry

Science.gov (United States)

Khurshid, Zohaib; Zafar, Muhammad; Qasim, Saad; Shahab, Sana; Naseem, Mustafa; AbuReqaiba, Ammar

2015-01-01

Rationalizing has become a new trend in the world of science and technology. Nanotechnology has ascended to become one of the most favorable technologies, and one which will change the application of materials in different fields. The quality of dental biomaterials has been improved by the emergence of nanotechnology. This technology manufactures materials with much better properties or by improving the properties of existing materials. The science of nanotechnology has become the most popular area of research, currently covering a broad range of applications in dentistry. This review describes the basic concept of nanomaterials, recent innovations in nanomaterials and their applications in restorative dentistry. Advances in nanotechnologies are paving the future of dentistry, and there are a plenty of hopes placed on nanomaterials in terms of improving the health care of dental patients. PMID:28787967

Nanotechnology: The Incredible Invisible World

Science.gov (United States)

Roberts, Amanda S.

2011-01-01

The concept of nanotechnology was first introduced in 1959 by Richard Feynman at a meeting of the American Physical Society. Nanotechnology opens the door to an exciting new science/technology/engineering field. The possibilities for the uses of this technology should inspire the imagination to think big. Many are already pursuing such feats…

Nanotechnology Applications

Science.gov (United States)

This book chapter discusses various nanotechnologies for water sustainability. Detailed information on catalysis as an advanced oxidation process, nanofiltration, adsorption, water disinfection, and groundwater remediation is provided for water treatment. These nanomaterials effe...

Nanotechnologies and Nanomaterials: Scientific, Economic and Political Realia of the New Century

Directory of Open Access Journals (Sweden)

Zaporotskova Irina Vladimirovna

2015-05-01

Full Text Available The current state and problems of nanotechnology development in the Russian Federation in modern economic, political and scientific conditions are presented. Nanotechnologies and nanomaterials have already been used in all developed countries of the world in the most significant areas of human activity industry, defense, information sphere, radio electronics, energy drinks, transport, biotechnology, medicine. The Government of the Russian Federation formulated the main objectives of scientific and economic community for the development of nanotechnologies in the conditions of the demanded import substitution. In the developed countries the comprehension of the key role of nanotechnologies led to the elaboration of large-scale programs for their development on the basis of state support. Similar programs are adopted more than in thirty countries around the world, including the Russian Federation. The author of the present article studies the current state of nanotech industry in Russia and classifies nanotechnologies according to the intrinsic principle. As a result, four main directions in the field of nanotechnologies are allocated: 1 nanomaterials; 2 photonics, spintronics, nanoelectronics (devices based on the nanoprinciples; 3 nanometrology, nanomanipulators and modeling; 4 nanosensors and nanodetectors. Some perspective scientific and technological projects of nanotech industry development in Russia are also considered. The author points to economic, social, ecological, and scientific and technical opportunities of nanotechnologies development in Russia, as well as their threats.

Introduction to nanotechnology: definition, terms, occurrence and applications in environment

Directory of Open Access Journals (Sweden)

MHS Ahmeda

2017-01-01

Full Text Available Nanotechnology is an emerging multidisciplinary technique that involves application based on the synthesis of molecules in nano-scale size range. Nanotechnology is also seen as new and fast emerging field that involves the manufacture, processing and application of structure, device and system by controlling shape and size in nanometer scale. The concept of nanotechnology is driven from the Greek word nano (meaning dwarf. The nano-particles are defined as a discrete entity that has dimensions of the order of 100 nm or less. It is the small size in combination with the chemical composition and surface structure that gives the nano-particles their unique features. The alterations in physical properties serve to enhance versatility and efficacy in product development, resulting in more effective industrial and medical applications. As a result of the widespread use of nanotechnology and nano-materials, these particles find their way into the environment. Therefore, a focus on the source of nano-particles in the environment and their effects is included. This review concentrate on the recent information about analytical developments to assess the occurrence, fate and behavior of nano-materials in environment. It also focuses on the applications of nanotechnology in environment, especially in the area of air and water purifications.

Nanotechnology in hyperthermia cancer therapy: From fundamental principles to advanced applications.

Science.gov (United States)

Beik, Jaber; Abed, Ziaeddin; Ghoreishi, Fatemeh S; Hosseini-Nami, Samira; Mehrzadi, Saeed; Shakeri-Zadeh, Ali; Kamrava, S Kamran

2016-08-10

In this work, we present an in-depth review of recent breakthroughs in nanotechnology for hyperthermia cancer therapy. Conventional hyperthermia methods do not thermally discriminate between the target and the surrounding normal tissues, and this non-selective tissue heating can lead to serious side effects. Nanotechnology is expected to have great potential to revolutionize current hyperthermia methods. To find an appropriate place in cancer treatment, all nanotechnology-based hyperthermia methods and their risks/benefits must be thoroughly understood. In this review paper, we extensively examine and compare four modern nanotechnology-based hyperthermia methods. For each method, the possible physical mechanisms of heat generation and enhancement due to the presence of nanoparticles are explained, and recent in vitro and in vivo studies are reviewed and discussed. Nano-Photo-Thermal Therapy (NPTT) and Nano-Magnetic Hyperthermia (NMH) are reviewed as the two first exciting approaches for targeted hyperthermia. The third novel hyperthermia method, Nano-Radio-Frequency Ablation (NaRFA) is discussed together with the thermal effects of novel nanoparticles in the presence of radiofrequency waves. Finally, Nano-Ultrasound Hyperthermia (NUH) is described as the fourth modern method for cancer hyperthermia. Copyright © 2016 Elsevier B.V. All rights reserved.

PREFACE: IV Nanotechnology International Forum (RUSNANOTECH 2011)

Science.gov (United States)

Dvurechenskii, Anatoly; Alfimov, Mikhail; Suzdalev, Igor; Osiko, Vyacheslav; Khokhlov, Aleksey; Son, Eduard; Skryabin, Konstantin; Petrov, Rem; Deev, Sergey

2012-02-01

Logo The RUSNANOTECH 2011 International Forum on Nanotechnology was held from 26-28 October 2011, in Moscow, Russia. It was the fourth forum organized by RUSNANO (Russian Corporation of Nanotechnologies) since 2008. In March 2011 RUSNANO was established as an open joint-stock company through the reorganization of the state corporation Russian Corporation of Nanotechnologies. RUSNANO's mission is to develop the Russian nanotechnology industry through co-investment in nanotechnology projects with substantial economic potential or social benefit. Within the framework of the Forum Science and Technology Program, presentations on key trends of nanotechnology development were given by foreign and Russian scientists, R&D officers of leading international companies, universities and scientific centers. The science and technology program of the Forum was divided into four sections as follows (by following hyperlinks you may find each section's program including videos of all oral presentations): Nanoelectronics and Nanophotonics Nanomaterials Nanotechnology and Green Energy Nanotechnology in Healthcare and Pharma (United business and science & technology section on 'RUSNANOTECH 2011') The scientific program of the forum included more than 50 oral presentations by leading scientists from 15 countries. Among them were world-known specialists such as Professor S Bader (Argonne National Laboratory, USA), Professor O Farokzhad (Harvard Medical School, USA), Professor K Chien (Massachusetts General Hospital, USA), Professor L Liz-Marzan (University of Vigo), A Luque (Polytechnic University of Madrid) and many others. The poster session consisted of over 120 presentations, 90 of which were presented in the framework of the young scientists' nanotechnology papers competition. This volume of Journal of Physics: Conference Series includes a selection of 47 submissions. Section editors of the proceedings: Nanoelectronics and nanophotonics Corresponding Member of Russian Academy of

Improving the speed of AFM by mechatronic design and modern control methods

International Nuclear Information System (INIS)

Schitter, Georg

2009-01-01

In Atomic Force Microscopy (AFM) high-performance and high-precision control of the AFM scanner and of the imaging forces is crucial. Particularly at high imaging speeds the dynamic behaviour of the scanner may cause imaging artifacts and limit the maximum imaging rate. This contribution discusses and presents recent improvements in AFM instrumentation for faster imaging by means of mechatronic design and utilizing modern control engineering methods. Combining these improvements enables AFM imaging at more than two orders of magnitudes faster than conventional AFMs. (orig.)

3D bioprinting and nanotechnology in tissue engineering and regenerative medicine

CERN Document Server

Zhang, Lijie Grace; Leong, Kam

2015-01-01

3D Bioprinting and Nanotechnology in Tissue Engineering provides an in depth introduction to these two technologies and their industrial applications. Stem cells in tissue regeneration are covered, along with nanobiomaterials. Commercialization, legal and regulatory considerations are also discussed in order to help you translate nanotechnology and 3D printing-based products to the marketplace and the clinic. Dr. Zhang's and Dr. Fishers' team of expert contributors have pooled their expertise in order to provide a summary of the suitability, sustainability and limitations of each technique for each specific application. The increasing availability and decreasing costs of nanotechnologies and 3D printing technologies are driving their use to meet medical needs, and this book provides an overview of these technologies and their integration. It shows how nanotechnology can increase the clinical efficiency of prosthesis or artificial tissues made by bioprinting or biofabrication. Students and professionals will r...

Nanotechnology impact on the automotive industry.

Science.gov (United States)

Wong, Kaufui V; Paddon, Patrick A

2014-01-01

Nanotechnology has been implemented widely in the automotive industry. This technology is particularly useful in coatings, fabrics, structural materials, fluids, lubricants, tires, and preliminary applications in smart glass/windows and video display systems. A special sub-class of improved materials, alternative energy, has also seen a boost from advances in nanotechnology, and continues to be an active research area. A correlation exists in the automotive industry between the areas with increased nanotechnology incorporation and those with increased profit margins via improvements and customer demands.

Computational Nanotechnology of Molecular Materials, Electronics, and Actuators with Carbon Nanotubes and Fullerenes

Science.gov (United States)

Srivastava, Deepak; Menon, Madhu; Cho, Kyeongjae; Biegel, Bryan (Technical Monitor)

2001-01-01

The role of computational nanotechnology in developing next generation of multifunctional materials, molecular scale electronic and computing devices, sensors, actuators, and machines is described through a brief review of enabling computational techniques and few recent examples derived from computer simulations of carbon nanotube based molecular nanotechnology.

Nanotechnology in glucose monitoring: advances and challenges in the last 10 years.

Science.gov (United States)

Scognamiglio, Viviana

2013-09-15

In the last decades, a wide multitude of research activity has been focused on the development of biosensors for glucose monitoring, devoted to overcome the challenges associated with smart analytical performances with commercial implications. Crucial issues still nowadays elude biosensors to enter the market, such as sensitivity, stability, miniaturisation, continuous and in situ monitoring in a complex matrix. A noteworthy tendency of biosensor technology is likely to push towards nanotechnology, which allows to reduce dimensions at the nanoscale, consenting the construction of arrays for high throughput analysis with the integration of microfluidics, and enhancing the performance of the biological components by using new nanomaterials. This review aims to highlight current trends in biosensors for glucose monitoring based on nanotechnology, reporting widespread representative examples of the recent approaches for nanobiosensors over the past 10 years. Progress in nanotechnology for the development of biosensing systems for blood glucose level monitoring will be discussed, in view of their design and construction on the bases of the new materials offered by nanotechnology. Copyright © 2013 Elsevier B.V. All rights reserved.

Broader Societal Issues of Nanotechnology

International Nuclear Information System (INIS)

Roco, M.C.

2003-01-01

Nanoscale science and engineering are providing unprecedented understanding and control over the basic building blocks of matter, leading to increased coherence in knowledge, technology, and education. The main reason for developing nanotechnology is to advance broad societal goals such as improved comprehension of nature, increased productivity, better healthcare, and extending the limits of sustainable development and of human potential. This paper outlines societal implication activities in nanotechnology R and D programs. The US National Nanotechnology Initiative annual investment in research with educational and societal implications is estimated at about $30 million (of which National Science Foundation (NSF) awards about $23 million including contributions to student fellowships), and in nanoscale research with relevance to environment at about $50 million (of which NSF awards about $30 million and EPA about $6 million). An appeal is made to researchers and funding organizations worldwide to take timely and responsible advantage of the new technology for economic and sustainable development, to initiate societal implications studies from the beginning of the nanotechnology programs, and to communicate effectively the goals and potential risks with research users and the public

Broader Societal Issues of Nanotechnology

Science.gov (United States)

Roco, M. C.

2003-08-01

Nanoscale science and engineering are providing unprecedented understanding and control over the basic building blocks of matter, leading to increased coherence in knowledge, technology, and education. The main reason for developing nanotechnology is to advance broad societal goals such as improved comprehension of nature, increased productivity, better healthcare, and extending the limits of sustainable development and of human potential. This paper outlines societal implication activities in nanotechnology R&D programs. The US National Nanotechnology Initiative annual investment in research with educational and societal implications is estimated at about 30 million (of which National Science Foundation (NSF) awards about 23 million including contributions to student fellowships), and in nanoscale research with relevance to environment at about 50 million (of which NSF awards about 30 million and EPA about 6 million). An appeal is made to researchers and funding organizations worldwide to take timely and responsible advantage of the new technology for economic and sustainable development, to initiate societal implications studies from the beginning of the nanotechnology programs, and to communicate effectively the goals and potential risks with research users and the public.

Broader Societal Issues of Nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Roco, M.C. [National Science Foundation (NSF) (United States)], E-mail: mroco@nsf.gov

2003-08-15

Nanoscale science and engineering are providing unprecedented understanding and control over the basic building blocks of matter, leading to increased coherence in knowledge, technology, and education. The main reason for developing nanotechnology is to advance broad societal goals such as improved comprehension of nature, increased productivity, better healthcare, and extending the limits of sustainable development and of human potential. This paper outlines societal implication activities in nanotechnology R and D programs. The US National Nanotechnology Initiative annual investment in research with educational and societal implications is estimated at about $30 million (of which National Science Foundation (NSF) awards about $23 million including contributions to student fellowships), and in nanoscale research with relevance to environment at about $50 million (of which NSF awards about $30 million and EPA about $6 million). An appeal is made to researchers and funding organizations worldwide to take timely and responsible advantage of the new technology for economic and sustainable development, to initiate societal implications studies from the beginning of the nanotechnology programs, and to communicate effectively the goals and potential risks with research users and the public.

Emerging nanotechnology based strategies for diagnosis and therapeutics of urinary tract infections: A review.

Science.gov (United States)

Kumar, M S; Das, A P

2017-11-01

At present, various diagnostic and therapeutic approaches are available for urinary tract infections. But, still the quest for development of more rapid, accurate and reliable approach is an unending process. The pathogens, especially uropathogens are adapting to new environments and antibiotics day by day rapidly. Therefore, urinary tract infections are evolving as hectic and difficult to eradicate, increasing the economic burden to the society. The technological advances should be able to compete the adaptability characteristics of microorganisms to combat their growth in new environments and thereby preventing their infections. Nanotechnology is at present an extensively developing area of immense scientific interest since it has diverse potential applications in biomedical field. Nanotechnology may be combined with cellular therapy approaches to overcome the limitations caused by conventional therapeutics. Nanoantibiotics and drug delivery using nanotechnology are currently growing areas of research in biomedical field. Recently, various categories of antibacterial nanoparticles and nanocarriers for drug delivery have shown their potential in the treatment of infectious diseases. Nanoparticles, compared to conventional antibiotics, are more beneficial in terms of decreasing toxicity, prevailing over resistance and lessening costs. Nanoparticles present long term therapeutic effects since they are retained in body for relatively longer periods. This review focuses on recent advances in the field of nanotechnology, principally emphasizing diagnostics and therapeutics of urinary tract infections. Copyright © 2017 Elsevier B.V. All rights reserved.

Nanotechnology and the need for risk governance

International Nuclear Information System (INIS)

Renn, O.; Roco, M. C.

2006-01-01

After identifying the main characteristics and prospects of nanotechnology as an emerging technology, the paper presents the general risks associated with nanotechnology applications and the deficits of the risk governance process today, concluding with recommendations to governments, industry, international organizations and other stakeholders. The International Risk Governance Council (IRGC) has identified a governance gap between the requirements pertaining to the nano- rather than the micro-/macro- technologies. The novel attributes of nanotechnology demand different routes for risk-benefit assessment and risk management, and at present, nanotechnology innovation proceeds ahead of the policy and regulatory environment. In the shorter term, the governance gap is significant for those passive nanostructures that are currently in production and have high exposure rates; and is especially significant for the several 'active' nanoscale structures and nanosystems that we can expect to be on the market in the near future. Active nanoscale structures and nanosystems have the potential to affect not only human health and the environment but also aspects of social lifestyle, human identity and cultural values. The main recommendations of the report deal with selected higher risk nanotechnology applications, short- and long-term issues, and global models for nanotechnology governance

Intellectual property rights in nanotechnology

International Nuclear Information System (INIS)

Bastani, Behfar; Fernandez, Dennis

2002-01-01

Intellectual property (IP) rights are essential in today's technology-driven age. Building a strategic IP portfolio is economically important from both an offensive and defensive standpoint. After an introduction to intellectual property rights and acquisitions, we provide an overview of current efforts in nanotechnology. Research into nano-scale materials and devices and requirements for their efficient mass production are outlined, with focus on the applicable IP rights and strategies. We present current and future applications of nanotechnology to such fields as electronics, sensors, aerospace, medicine, environment and sanitation, together with the IP rights that can be brought to bear in each. Finally, some challenging issues surrounding the acquisition of intellectual property rights in nanotechnology are presented

Cultural diversity in nanotechnology ethics.

Science.gov (United States)

Schummer, Joachim

2011-01-01

Along with the rapid worldwide advance of nanotechnology, debates on associated ethical issues have spread from local to international levels. However unlike science and engineering issues, international perceptions of ethical issues are very diverse. This paper provides an analysis of how sociocultural factors such as language, cultural heritage, economics and politics can affect how people perceive ethical issues of nanotechnology. By attempting to clarify the significance of sociocultural issues in ethical considerations my aim is to support the ongoing international dialogue on nanotechnology. At the same time I pose the general question of ethical relativism in engineering ethics, that is to say whether or not different ethical views are irreconcilable on a fundamental level.

Combining adhesive contact mechanics with a viscoelastic material model to probe local material properties by AFM.

Science.gov (United States)

Ganser, Christian; Czibula, Caterina; Tscharnuter, Daniel; Schöberl, Thomas; Teichert, Christian; Hirn, Ulrich

2017-12-20

Viscoelastic properties are often measured using probe based techniques such as nanoindentation (NI) and atomic force microscopy (AFM). Rarely, however, are these methods verified. In this article, we present a method that combines contact mechanics with a viscoelastic model (VEM) composed of springs and dashpots. We further show how to use this model to determine viscoelastic properties from creep curves recorded by a probe based technique. We focus on using the standard linear solid model and the generalized Maxwell model of order 2. The method operates in the range of 0.01 Hz to 1 Hz. Our approach is suitable for rough surfaces by providing a defined contact area using plastic pre-deformation of the material. The very same procedure is used to evaluate AFM based measurements as well as NI measurements performed on polymer samples made from poly(methyl methacrylate) and polycarbonate. The results of these measurements are then compared to those obtained by tensile creep tests also performed on the same samples. It is found that the tensile test results differ considerably from the results obtained by AFM and NI methods. The similarity between the AFM results and NI results suggests that the proposed method is capable of yielding results comparable to NI but with the advantage of the imaging possibilities of AFM. Furthermore, all three methods allowed a clear distinction between PC and PMMA by means of their respective viscoelastic properties.

Artificial intelligence in nanotechnology

OpenAIRE

Sacha, Gómez Moñivas; Varona, Pablo

2013-01-01

This is the author’s version of a work that was accepted for publication in Nanotechnology. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Nanotechnology 24.45 (2013): 452002 During the last decade there has been an incre...

Nanotechnology research: applications in nutritional sciences.

Science.gov (United States)

Srinivas, Pothur R; Philbert, Martin; Vu, Tania Q; Huang, Qingrong; Kokini, Josef L; Saltos, Etta; Saos, Etta; Chen, Hongda; Peterson, Charles M; Friedl, Karl E; McDade-Ngutter, Crystal; Hubbard, Van; Starke-Reed, Pamela; Miller, Nancy; Betz, Joseph M; Dwyer, Johanna; Milner, John; Ross, Sharon A

2010-01-01

The tantalizing potential of nanotechnology is to fabricate and combine nanoscale approaches and building blocks to make useful tools and, ultimately, interventions for medical science, including nutritional science, at the scale of approximately 1-100 nm. In the past few years, tools and techniques that facilitate studies and interventions in the nanoscale range have become widely available and have drawn widespread attention. Recently, investigators in the food and nutrition sciences have been applying the tools of nanotechnology in their research. The Experimental Biology 2009 symposium entitled "Nanotechnology Research: Applications in Nutritional Sciences" was organized to highlight emerging applications of nanotechnology to the food and nutrition sciences, as well as to suggest ways for further integration of these emerging technologies into nutrition research. Speakers focused on topics that included the problems and possibilities of introducing nanoparticles in clinical or nutrition settings, nanotechnology applications for increasing bioavailability of bioactive food components in new food products, nanotechnology opportunities in food science, as well as emerging safety and regulatory issues in this area, and the basic research applications such as the use of quantum dots to visualize cellular processes and protein-protein interactions. The session highlighted several emerging areas of potential utility in nutrition research. Nutrition scientists are encouraged to leverage ongoing efforts in nanomedicine through collaborations. These efforts could facilitate exploration of previously inaccessible cellular compartments and intracellular pathways and thus uncover strategies for new prevention and therapeutic modalities.

An evaluation scheme for nanotechnology policies

International Nuclear Information System (INIS)

Soltani, Ali M.; Tabatabaeian, Seyed H.; Hanafizadeh, Payam; Bamdad Soofi, Jahanyar

2011-01-01

Dozens of countries are executing national nanotechnology plans. No rigorous evaluation scheme for these plans exists, although stakeholders—especially policy makers, top-level agencies and councils, as well as the society at large—are eager to learn the outcome of these policies. In this article, we recommend an evaluation scheme for national nanotechnology policies that would be used to review the whole or any component part of a national nanotechnology plan. In this scheme, a component at any level of aggregation is evaluated. The component may be part of the plan’s overarching policy goal, which for most countries is to create wealth and improve the quality of life of their nation with nanotechnology. Alternatively, the component may be a programme or an activity related to a programme. The evaluation could be executed at different times in the policy’s life cycle, i.e., before the policy is formulated, during its execution or after its completion. The three criteria for policy evaluation are appropriateness, efficiency and effectiveness. The evaluator should select the appropriate qualitative or quantitative methods to evaluate the various components of national nanotechnology plans.

Atom-resolved AFM imaging of calcite nanoparticles in water

Energy Technology Data Exchange (ETDEWEB)

Imada, Hirotake; Kimura, Kenjiro [Department of Chemistry, School of Science, Kobe University, Rokko-dai, Nada, Kobe 657-8501 (Japan); Onishi, Hiroshi, E-mail: oni@kobe-u.ac.jp [Department of Chemistry, School of Science, Kobe University, Rokko-dai, Nada, Kobe 657-8501 (Japan)

2013-06-20

Highlights: ► An advanced frequency-modulation AFM (FM-AFM) was applied for imaging particles. ► Atom-resolved topography of nano-sized particles of calcite was observed in water. ► Locally ordered structures were found and assigned to a (104) facet of calcite. ► A promising ability of FM-AFM was demonstrated in imaging nano-sized particles. - Abstract: The atom-resolved topography of calcite nanoparticles was observed in water using a frequency-modulation atomic force microscope. Locally ordered structures were found and assigned to a (104) facet of crystalline calcite.

Atom-resolved AFM imaging of calcite nanoparticles in water

International Nuclear Information System (INIS)

Imada, Hirotake; Kimura, Kenjiro; Onishi, Hiroshi

2013-01-01

Highlights: ► An advanced frequency-modulation AFM (FM-AFM) was applied for imaging particles. ► Atom-resolved topography of nano-sized particles of calcite was observed in water. ► Locally ordered structures were found and assigned to a (104) facet of calcite. ► A promising ability of FM-AFM was demonstrated in imaging nano-sized particles. - Abstract: The atom-resolved topography of calcite nanoparticles was observed in water using a frequency-modulation atomic force microscope. Locally ordered structures were found and assigned to a (104) facet of crystalline calcite

Tip-enhanced Raman mapping with top-illumination AFM.

Science.gov (United States)

Chan, K L Andrew; Kazarian, Sergei G

2011-04-29

Tip-enhanced Raman mapping is a powerful, emerging technique that offers rich chemical information and high spatial resolution. Currently, most of the successes in tip-enhanced Raman scattering (TERS) measurements are based on the inverted configuration where tips and laser are approaching the sample from opposite sides. This results in the limitation of measurement for transparent samples only. Several approaches have been developed to obtain tip-enhanced Raman mapping in reflection mode, many of which involve certain customisations of the system. We have demonstrated in this work that it is also possible to obtain TERS nano-images using an upright microscope (top-illumination) with a gold-coated Si atomic force microscope (AFM) cantilever without significant modification to the existing integrated AFM/Raman system. A TERS image of a single-walled carbon nanotube has been achieved with a spatial resolution of ∼ 20-50 nm, demonstrating the potential of this technique for studying non-transparent nanoscale materials.

Tip-enhanced Raman mapping with top-illumination AFM

Energy Technology Data Exchange (ETDEWEB)

Chan, K L Andrew; Kazarian, Sergei G, E-mail: s.kazarian@imperial.ac.uk [Department of Chemical Engineering, Imperial College London, SW7 2AZ (United Kingdom)

2011-04-29

Tip-enhanced Raman mapping is a powerful, emerging technique that offers rich chemical information and high spatial resolution. Currently, most of the successes in tip-enhanced Raman scattering (TERS) measurements are based on the inverted configuration where tips and laser are approaching the sample from opposite sides. This results in the limitation of measurement for transparent samples only. Several approaches have been developed to obtain tip-enhanced Raman mapping in reflection mode, many of which involve certain customisations of the system. We have demonstrated in this work that it is also possible to obtain TERS nano-images using an upright microscope (top-illumination) with a gold-coated Si atomic force microscope (AFM) cantilever without significant modification to the existing integrated AFM/Raman system. A TERS image of a single-walled carbon nanotube has been achieved with a spatial resolution of {approx} 20-50 nm, demonstrating the potential of this technique for studying non-transparent nanoscale materials.

Tip-enhanced Raman mapping with top-illumination AFM

International Nuclear Information System (INIS)

Chan, K L Andrew; Kazarian, Sergei G

2011-01-01

Tip-enhanced Raman mapping is a powerful, emerging technique that offers rich chemical information and high spatial resolution. Currently, most of the successes in tip-enhanced Raman scattering (TERS) measurements are based on the inverted configuration where tips and laser are approaching the sample from opposite sides. This results in the limitation of measurement for transparent samples only. Several approaches have been developed to obtain tip-enhanced Raman mapping in reflection mode, many of which involve certain customisations of the system. We have demonstrated in this work that it is also possible to obtain TERS nano-images using an upright microscope (top-illumination) with a gold-coated Si atomic force microscope (AFM) cantilever without significant modification to the existing integrated AFM/Raman system. A TERS image of a single-walled carbon nanotube has been achieved with a spatial resolution of ∼ 20-50 nm, demonstrating the potential of this technique for studying non-transparent nanoscale materials.

Nanophotonics: The link between nanotechnology and photonics

CSIR Research Space (South Africa)

Sinha Ray, S

2012-10-01

Full Text Available and importance ? CSIR 2012 www.csir.co.za/nano Slide 2 ? Birth and definition of nanotechnology ? Benefits of nanotechnology ? The link between nanotechnology and photonics: Nanophotonics ? Importance and future of nanophotonics... ? Conclusions ? Our on-going research on nanophotonics ? CSIR 2006 www.csir.co.zaSlide 3 MISSION: The DST/CSIR NATIONAL CENTRE FOR NANOSTRUCTURED MATERIALS coordinates, facilitates, disseminates new knowledge, and expedites...

Development of a platform for roadmapping nanotechnology for energy

International Nuclear Information System (INIS)

Sarwqar, Mohammad Sohail

2004-02-01

This report includes the vision for global energy sector to develop a highly reliable, economically viable, and environmentally benign power generation and delivery systems with the help of nanotechnology. This scenario will provide indispensable public services and sustain the economic growth. The need to take advantage of the science of ultra-small scales such as nanotechnology is emphasized. The application of nanotechnology in future energy systems, specially the advanced renewables (photovoltaics, fuel cells, etc) are explained in a systematic and organized manner. The role of nanotechnology for the ubiquitous digital society and minimal carbon emissions (clean environment) with the help of nanotechnology is also envisioned. This report attempts to roadmap nanotechnology for energy through to 2030

Nanotechnology in food science: Functionality, applicability, and safety assessment

Directory of Open Access Journals (Sweden)

Xiaojia He

2016-10-01

Full Text Available Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted.

National Needs Drivers for Nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Yonas, G.; Picraux, S.T.

2000-10-09

Societal needs related to demographics, resources, and human behavior will drive technological advances over the next 20 years. Nanotechnology is anticipated to be an important enabler of these advances, and thus maybe anticipated to have significant influence on new systems approaches to solving societal problems as well as on extending current science and technology-based applications. To examine the potential implications of nanotechnology a societal needs-driven approach is taken. Thus the methodology is to present the definition of the problem, and then examine system concepts, technology issues, and promising future directions. We approach the problem definition from a national and global security perspective and identify three key areas involving the condition of the planet, the human condition, and global security. In anticipating societal issues in the context of revolutionary technologies, such as maybe enabled by nanoscience, the importance of working on the entire life cycle of any technological solution is stressed.

Nanotechnology And Examination Of Multi Walled Carbon Nanotubes

OpenAIRE

Kutucu, Burcu

2010-01-01

The main subject of this study is the definition of nanotechnology, benefits of nanotechnology, nanotechnology applications in Turkey and world and the history of nanotechnology. Also single and multi walled carbon nanotubes and Van der Waals bands are examined in this study. At first a fixed end frame loaded with a load P is studied and governing equations solved in MATHEMATICA. Secontly the same procedure is repeated for a fixed and frame loaded with moment M is studied and governing equati...

Nanotechnology in Corneal Neovascularization Therapy—A Review

Science.gov (United States)

Gonzalez, Lilian; Loza, Raymond J.; Han, Kyu-Yeon; Sunoqrot, Suhair; Cunningham, Christy; Purta, Patryk; Drake, James; Jain, Sandeep; Hong, Seungpyo

2013-01-01

Abstract Nanotechnology is an up-and-coming branch of science that studies and designs materials with at least one dimension sized from 1–100 nm. These nanomaterials have unique functions at the cellular, atomic, and molecular levels.1 The term “nanotechnology” was first coined in 1974.2 Since then, it has evolved dramatically and now consists of distinct and independent scientific fields. Nanotechnology is a highly studied topic of interest, as nanoparticles can be applied to various fields ranging from medicine and pharmacology, to chemistry and agriculture, to environmental science and consumer goods.3 The rapidly evolving field of nanomedicine incorporates nanotechnology with medical applications, seeking to give rise to new diagnostic means, treatments, and tools. Over the past two decades, numerous studies that underscore the successful fusion of nanotechnology with novel medical applications have emerged. This has given rise to promising new therapies for a variety of diseases, especially cancer. It is becoming abundantly clear that nanotechnology has found a place in the medical field by providing new and more efficient ways to deliver treatment. Ophthalmology can also stand to benefit significantly from the advances in nanotechnology research. As it relates to the eye, research in the nanomedicine field has been particularly focused on developing various treatments to prevent and/or reduce corneal neovascularization among other ophthalmologic disorders. This review article aims to provide an overview of corneal neovascularization, currently available treatments, and where nanotechnology comes into play. PMID:23425431

International strategy for Nanotechnology Research

International Nuclear Information System (INIS)

Roco, M.C.

2001-01-01

The worldwide nanotechnology research and development (R and D) investment reported by government organizations has increased by a factor of 3.5 between 1997 and 2001, and the highest rate of 90% is in 2001. At least 30 countries have initiated or are beginning national activities in this field. Scientists have opened a broad net of discoveries that does not leave any major research area untouched in physical, biological, and engineering sciences. Industry has gained confidence that nanotechnology will bring competitive advantages. The worldwide annual industrial production is estimated to exceed $1 trillion in 10-15 years from now, which would require about 2 million nanotechnology workers. U.S. has initiated a multidisciplinary strategy for development of science and engineering fundamentals through the National Nanotechnology Initiative. Japan and Europe have broad programs, and their current plans look ahead to four to five years. Other countries have encouraged their own areas of strength, several of them focusing on fields of the potential markets. Differences among countries are observed in the research domain they are aiming for, the level of program integration into various industrial sectors, and in the time scale of their R and D targets. Nanotechnology is growing in an environment where international interactions accelerate in science, education and industrial R and D. A global strategy of mutual interest is envisioned by connecting individual programs of contributing countries, professional communities, and international organizations

Sequential electrochemical oxidation and site-selective growth of nanoparticles onto AFM probes.

Science.gov (United States)

Wang, Haitao; Tian, Tian; Zhang, Yong; Pan, Zhiqiang; Wang, Yong; Xiao, Zhongdang

2008-08-19

In this work, we reported an approach for the site-selective growth of nanoparticle onto the tip apex of an atomic force microscopy (AFM) probe. The silicon AFM probe was first coated with a self-assembled monolayer (SAM) of octadecyltrichlorosilane (OTS) through a chemical vapor deposition (CVD) method. Subsequently, COOH groups were selectively generated at the tip apex of silicon AFM probes by applying an appropriate bias voltage between the tip and a flat gold electrode. The transformation of methyl to carboxylic groups at the tip apex of the AFM probe was investigated through measuring the capillary force before and after electrochemical oxidation. To prepare the nanoparticle terminated AFM probe, the oxidized AFM probe was then immersed in an aqueous solution containing positive metal ions, for example, Ag+, to bind positive metal ions to the oxidized area (COOH terminated area), followed by chemical reduction with aqueous NaBH 4 and further development (if desired) to give a metal nanoparticle-modified AFM probe. The formation of a metal nanoparticle at the tip apex of the AFM probe was confirmed by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDXA).

Nanotechnology Characterization Laboratory

Data.gov (United States)

Federal Laboratory Consortium — The Nanotechnology Characterization Laboratory (NCL) at the Frederick National Laboratory for Cancer Research performs preclinical characterization of nanomaterials...

Nanotechnology Characterization Lab

Data.gov (United States)

Federal Laboratory Consortium — The Nanotechnology Characterization Laboratory (NCL) at the Frederick National Laboratory for Cancer Research performs preclinical characterization of nanomaterials...

NCI Alliance for Nanotechnology in Cancer

Science.gov (United States)

The NCI Alliance for Nanotechnology in Cancer funds the Cancer Nanotechnology Training Centers collectively with the NCI Cancer Training Center. Find out about the funded Centers, to date, that train our next generation of scientists in the field of Canc

Scope of nanotechnology in modern textiles

Science.gov (United States)

This review article demonstrates the scope and applications of nanotechnology towards modification and development of advanced textile fibers, yarns and fabrics and their processing techniques. Basically, it summarizes the recent advances made in nanotechnology and its applications to cotton textil...

The spin-3/2 Ising model AFM/AFM two-layer lattice with crystal field

International Nuclear Information System (INIS)

Yigit, A.; Albayrak, E.

2010-01-01

The spin-3/2 Ising model is investigated for the case of antiferromagnetic (AFM/AFM) interactions on the two-layer Bethe lattice by using the exact recursion relations in a pairwise approach for given coordination numbers q=3, 4 and 6 when the layers are under the influences of equal external magnetic and equal crystal fields. The ground state (GS) phase diagrams are obtained on the different planes in detail and then the temperature dependent phase diagrams of the system are calculated accordingly. It is observed that the system presents both second- and first-order phase transitions for all q, therefore, tricritical points. It was also found that the system exhibits double-critical end points and isolated points. The model also presents two Neel temperatures, TN, and the existence of which leads to the reentrant behavior.

Synergistic Interplay of Medicinal Chemistry and Formulation Strategies in Nanotechnology - From Drug Discovery to Nanocarrier Design and Development.

Science.gov (United States)

Sunoqrot, Suhair; Hamed, Rania; Abdel-Halim, Heba; Tarawneh, Ola

2017-01-01

Over the last few decades, nanotechnology has given rise to promising new therapies and diagnostic tools for a wide range of diseases, especially cancer. The unique properties of nanocarriers such as liposomes, polymeric nanoparticles, micelles, and bioconjugates have mainly been exploited to enhance drug solubility, dissolution, and bioavailability. The most important advantage offered by nanotechnology is the ability to specifically target organs, tissues, and individual cells, which ultimately reduces the systemic side effects and improves the therapeutic index of drug molecules. The contribution of medicinal chemistry to nanotechnology is evident in the abundance of new active molecules that are being discovered but are faced with tremendous delivery challenges by conventional formulation strategies. Additionally, medicinal chemistry plays a crucial role in all the steps involved in the preparation of nanocarriers, where structure-activity relationships of the drug molecule as well as the nanocarrier are harnessed to enhance the design, efficacy, and safety of nanoformulations. The aim of this review is to provide an overview of the contributions of medicinal chemistry to nanotechnology, from supplying drug candidates and inspiring high-throughput nanocarrier design strategies, to structure-activity relationship elucidation and construction of computational models for better understanding of nanocarrier physicochemical properties and biological behavior. These two fields are undoubtedly interconnected and we will continue to see the fruits of that communion for years to come. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Nanotechnology in food science: Functionality, applicability, and safety assessment.

Science.gov (United States)

He, Xiaojia; Hwang, Huey-Min

2016-10-01

Rapid development of nanotechnology is expected to transform many areas of food science and food industry with increasing investment and market share. In this article, current applications of nanotechnology in food systems are briefly reviewed. Functionality and applicability of food-related nanotechnology are highlighted in order to provide a comprehensive view on the development and safety assessment of nanotechnology in the food industry. While food nanotechnology offers great potential benefits, there are emerging concerns arising from its novel physicochemical properties. Therefore, the safety concerns and regulatory policies on its manufacturing, processing, packaging, and consumption are briefly addressed. At the end of this article, the perspectives of nanotechnology in active and intelligent packaging applications are highlighted. Copyright © 2016. Published by Elsevier B.V.

Identification and assessment of professional competencies for implementation of nanotechnology in engineering education

Science.gov (United States)

Jean, Ming-Der; Jiang, Ji-Bin; Chien, Jia-Yi

2017-11-01

The purpose of this study was to construct the indicators of professional competencies of the nanotechnology-based sputtering system industry based on industry requirements and analyse the core competencies of the industry for promoting the human resource of physical vapour deposition technology. The document analysis, expert interview, and Delphi technique surveys were considered and the survey items with 32 items divided into 7 domains were selected according to consensus opinions of 10 experts by the Delphi survey technique. Through three questionnaire surveys' analysis, the professional competence scales for the K-S tests showed a good internal consistency. The findings of this study provide guidelines for professional competence for nanotechnology-based sputtering technology by applying surface heat-treatment industry. These guidelines can also reveal the practical competency requirements of nanotechnology-based sputtering technology to deal with any subsequent challenges, future developments, and invisible services for students in a technology institute programme.

Empowering citizens in international governance of nanotechnologies

Science.gov (United States)

Malsch, Ineke; Subramanian, Vrishali; Semenzin, Elena; Hristozov, Danail; Marcomini, Antonio; Mullins, Martin; Hester, Karena; McAlea, Eamonn; Murphy, Finbarr; Tofail, Syed A. M.

2015-05-01

The international dialogue on responsible governance of nanotechnologies engages a wide range of actors with conflicting as well as common interests. It is also characterised by a lack of evidence-based data on uncertain risks of in particular engineered nanomaterials. The present paper aims at deepening understanding of the collective decision making context at international level using the grounded theory approach as proposed by Glaser and Strauss in "The Discovery of Grounded Theory" (1967). This starts by discussing relevant concepts from different fields including sociological and political studies of international relations as well as political philosophy and ethics. This analysis of current trends in international law making is taken as starting point for exploring the role that a software decision support tool could play in multi-stakeholder global governance of nanotechnologies. These theoretical ideas are then compared with the current design of the SUN Decision Support System (SUNDS) under development in the European project on Sustainable Nanotechnologies (SUN, www.sun-fp7.eu). Through constant comparison, the ideas are also compared with requirements of different stakeholders as expressed during a user workshop. This allows for highlighting discussion points for further consideration.

Empowering citizens in international governance of nanotechnologies

Energy Technology Data Exchange (ETDEWEB)

Malsch, Ineke, E-mail: malschtechnovaluation@xs4all.nl, E-mail: postbus@malsch.demon.nl [Malsch TechnoValuation (Netherlands); Subramanian, Vrishali; Semenzin, Elena; Hristozov, Danail; Marcomini, Antonio [Ca’Foscari University of Venice, Department of Environmental Sciences, Informatics and Statistics (Italy); Mullins, Martin; Hester, Karena; McAlea, Eamonn; Murphy, Finbarr [University of Limerick, Department of Accounting and Finance, Kemmy Business School (Ireland); Tofail, Syed A. M. [University of Limerick, Department of Physics and Energy, and Materials and Surface Sciences Institute (MSSI) (Ireland)

2015-05-15

The international dialogue on responsible governance of nanotechnologies engages a wide range of actors with conflicting as well as common interests. It is also characterised by a lack of evidence-based data on uncertain risks of in particular engineered nanomaterials. The present paper aims at deepening understanding of the collective decision making context at international level using the grounded theory approach as proposed by Glaser and Strauss in “The Discovery of Grounded Theory” (1967). This starts by discussing relevant concepts from different fields including sociological and political studies of international relations as well as political philosophy and ethics. This analysis of current trends in international law making is taken as starting point for exploring the role that a software decision support tool could play in multi-stakeholder global governance of nanotechnologies. These theoretical ideas are then compared with the current design of the SUN Decision Support System (SUNDS) under development in the European project on Sustainable Nanotechnologies (SUN, www.sun-fp7.eu http://www.sun-fp7.eu ). Through constant comparison, the ideas are also compared with requirements of different stakeholders as expressed during a user workshop. This allows for highlighting discussion points for further consideration.

Empowering citizens in international governance of nanotechnologies

International Nuclear Information System (INIS)

Malsch, Ineke; Subramanian, Vrishali; Semenzin, Elena; Hristozov, Danail; Marcomini, Antonio; Mullins, Martin; Hester, Karena; McAlea, Eamonn; Murphy, Finbarr; Tofail, Syed A. M.

2015-01-01

The international dialogue on responsible governance of nanotechnologies engages a wide range of actors with conflicting as well as common interests. It is also characterised by a lack of evidence-based data on uncertain risks of in particular engineered nanomaterials. The present paper aims at deepening understanding of the collective decision making context at international level using the grounded theory approach as proposed by Glaser and Strauss in “The Discovery of Grounded Theory” (1967). This starts by discussing relevant concepts from different fields including sociological and political studies of international relations as well as political philosophy and ethics. This analysis of current trends in international law making is taken as starting point for exploring the role that a software decision support tool could play in multi-stakeholder global governance of nanotechnologies. These theoretical ideas are then compared with the current design of the SUN Decision Support System (SUNDS) under development in the European project on Sustainable Nanotechnologies (SUN, www.sun-fp7.eu http://www.sun-fp7.eu ). Through constant comparison, the ideas are also compared with requirements of different stakeholders as expressed during a user workshop. This allows for highlighting discussion points for further consideration

Scenario planning and nanotechnological futures

International Nuclear Information System (INIS)

Farber, Darryl; Lakhtakia, Akhlesh

2009-01-01

Scenario planning may assist us in harnessing the benefits of nanotechnology and managing the associated risks for the good of the society. Scenario planning is a way to describe the present state of the world and develop several hypotheses about the future of the world, thereby enabling discussions about how the world ought to be. Scenario planning thus is not only a tool for learning and foresight, but also for leadership. Informed decision making by experts and political leaders becomes possible, while simultaneously allaying the public's perception of the risks of new and emerging technologies such as nanotechnology. Two scenarios of the societal impact of nanotechnology are the mixed-signals scenario and the confluence scenario. Technoscientists have major roles to play in both scenarios.

LET spectrum measurements in Cr-39 PNTD with AFM

Energy Technology Data Exchange (ETDEWEB)

Johnson, Carl Edward [Los Alamos National Laboratory; De Witt, Joel M [OSU, PHYSICS; Benton, Eric R [OSU, PHYSICS; Yasuda, Nakahiro [NIRS, HIMAC; Benton, Eugene V [UNIV OF SAN FRANCISCO

2010-01-01

Energetic protons, neutrons, and heavy ions undergoing collisions with target nuclei of varying Z can produce residual heavy recoil fragments via intra-nuclear cascade/evaporation reactions. The particles produced in these non-elastic collisions generally have such extremely short range ({approx}< 10 {mu}m) that they cannot be directly observed by conventional detection methods including CR-39 plastic nuclear track detector (PNTD) that has been chemically etched for analysis by standard visible light microscopy. However, high-LET recoil fragments having range on the order of several cell diameters can be produced in tissue during radiotherapy using proton and carbon beams. We have developed a method to analyze short-range, high-LET tracks in CR-39 plastic nuclear track detector (PNTD) using short duration chemical etching ({approx}< 1 {mu}m) followed by automated atomic force microscope (AFM) scanning. The post-scan data processing used in this work was based on semi-automated matrix analysis opposed to traditional grey-scale image analysis. This method takes advantage of the 3-D data obtained via AFM to achieve robust discrimination of nuclear tracks from other features. Through automation of AFM scanning, sufficient AFM scan frames were obtained to attain an LET spectrum spanning the LET range from 200-1500 keV/{mu}m. In addition to our experiments, simulations were carried out with the Monte Carlo transport code, FLUKA. To demonstrate this method, CR-39 PNTD was exposed to the proton therapy beam at Loma Linda University Medical Center (LLUMC) at 60 and 230 MeV. Additionally, detectors were exposed to I GeV protons at the NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL). For these exposures CR-39 PNTD, Al and Cu target foils were used between detector layers.

LET spectrum measurements in Cr-39 PNTD with AFM

International Nuclear Information System (INIS)

Johnson, Carl Edward; DeWitt, Joel M.; Benton, Eric R.; Yasuda, Nakahiro; Benton, Eugene V.

2010-01-01

Energetic protons, neutrons, and heavy ions undergoing collisions with target nuclei of varying Z can produce residual heavy recoil fragments via intra-nuclear cascade/evaporation reactions. The particles produced in these non-elastic collisions generally have such extremely short range (∼< 10 μm) that they cannot be directly observed by conventional detection methods including CR-39 plastic nuclear track detector (PNTD) that has been chemically etched for analysis by standard visible light microscopy. However, high-LET recoil fragments having range on the order of several cell diameters can be produced in tissue during radiotherapy using proton and carbon beams. We have developed a method to analyze short-range, high-LET tracks in CR-39 plastic nuclear track detector (PNTD) using short duration chemical etching (∼< 1 μm) followed by automated atomic force microscope (AFM) scanning. The post-scan data processing used in this work was based on semi-automated matrix analysis opposed to traditional grey-scale image analysis. This method takes advantage of the 3-D data obtained via AFM to achieve robust discrimination of nuclear tracks from other features. Through automation of AFM scanning, sufficient AFM scan frames were obtained to attain an LET spectrum spanning the LET range from 200-1500 keV/μm. In addition to our experiments, simulations were carried out with the Monte Carlo transport code, FLUKA. To demonstrate this method, CR-39 PNTD was exposed to the proton therapy beam at Loma Linda University Medical Center (LLUMC) at 60 and 230 MeV. Additionally, detectors were exposed to I GeV protons at the NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL). For these exposures CR-39 PNTD, Al and Cu target foils were used between detector layers.

Nanotechnology and Drug Delivery Part 1: Background and ...

African Journals Online (AJOL)

Nanotechnology in general and as it relates to drug delivery in humans has been reviewed in a two-part article, the first part of which is this paper. In this paper, nanotechnology in nature, history of nanotechnology and methods of synthesis are discussed, while also outlining its applications, benefits and risks.

Nanotechnology and its application in dentistry | Abiodun‑Solanke ...

African Journals Online (AJOL)

Nanotechnology influences almost every facet of everyday life from security to medicine. The concept of nanotechnology is that when one goes down to the bottom of things, one can discover unlimited possibilities and potential of the basic particle. In nanotechnology, analysis can be made to the level of manipulating atoms, ...

Recent developments in dimensional nanometrology using AFMs

Science.gov (United States)

Yacoot, Andrew; Koenders, Ludger

2011-12-01

Scanning probe microscopes, in particular the atomic force microscope (AFM), have developed into sophisticated instruments that, throughout the world, are no longer used just for imaging, but for quantitative measurements. A role of the national measurement institutes has been to provide traceable metrology for these instruments. This paper presents a brief overview as to how this has been achieved, highlights the future requirements for metrology to support developments in AFM technology and describes work in progress to meet this need.

Recent developments in dimensional nanometrology using AFMs

International Nuclear Information System (INIS)

Yacoot, Andrew; Koenders, Ludger

2011-01-01

Scanning probe microscopes, in particular the atomic force microscope (AFM), have developed into sophisticated instruments that, throughout the world, are no longer used just for imaging, but for quantitative measurements. A role of the national measurement institutes has been to provide traceable metrology for these instruments. This paper presents a brief overview as to how this has been achieved, highlights the future requirements for metrology to support developments in AFM technology and describes work in progress to meet this need. (perspective)

Multiple regimes of operation in bimodal AFM: understanding the energy of cantilever eigenmodes

Directory of Open Access Journals (Sweden)

Daniel Kiracofe

2013-06-01

Full Text Available One of the key goals in atomic force microscopy (AFM imaging is to enhance material property contrast with high resolution. Bimodal AFM, where two eigenmodes are simultaneously excited, confers significant advantages over conventional single-frequency tapping mode AFM due to its ability to provide contrast between regions with different material properties under gentle imaging conditions. Bimodal AFM traditionally uses the first two eigenmodes of the AFM cantilever. In this work, the authors explore the use of higher eigenmodes in bimodal AFM (e.g., exciting the first and fourth eigenmodes. It is found that such operation leads to interesting contrast reversals compared to traditional bimodal AFM. A series of experiments and numerical simulations shows that the primary cause of the contrast reversals is not the choice of eigenmode itself (e.g., second versus fourth, but rather the relative kinetic energy between the higher eigenmode and the first eigenmode. This leads to the identification of three distinct imaging regimes in bimodal AFM. This result, which is applicable even to traditional bimodal AFM, should allow researchers to choose cantilever and operating parameters in a more rational manner in order to optimize resolution and contrast during nanoscale imaging of materials.

Physical-mechanical image of the cell surface on the base of AFM data in contact mode

Science.gov (United States)

Starodubtseva, M. N.; Starodubtsev, I. E.; Yegorenkov, N. I.; Kuzhel, N. S.; Konstantinova, E. E.; Chizhik, S. A.

2017-10-01

Physical and mechanical properties of the cell surface are well-known markers of a cell state. The complex of the parameters characterizing the cell surface properties, such as the elastic modulus (E), the parameters of adhesive (Fa), and friction (Ff) forces can be measured using atomic force microscope (AFM) in a contact mode and form namely the physical-mechanical image of the cell surface that is a fundamental element of the cell mechanical phenotype. The paper aims at forming the physical-mechanical images of the surface of two types of glutaraldehyde-fixed cancerous cells (human epithelial cells of larynx carcinoma, HEp-2c cells, and breast adenocarcinoma, MCF-7 cells) based on the data obtained by AFM in air and revealing the basic difference between them. The average values of friction, elastic and adhesive forces, and the roughness of lateral force maps, as well as dependence of the fractal dimension of lateral force maps on Z-scale factor have been studied. We have revealed that the response of microscale areas of the HEp-2c cell surface having numerous microvilli to external mechanical forces is less expressed and more homogeneous in comparison with the response of MCF-7 cell surface.

Nanotechnology for membranes, filters and sieves

NARCIS (Netherlands)

Eijkel, Jan C.T.; van den Berg, Albert

2006-01-01

This mini-review is dedicated to the use of nanotechnology for membranes, filters and sieves. With the advent of nanotechnology researchers have acquired an unprecedented freedom to sculpt device geometry almost down to the molecular scale. Such structures can now replace the gels, membranes and

Nanotechnology in agriculture: prospects and constraints

Directory of Open Access Journals (Sweden)

Mukhopadhyay SS

2014-08-01

control of pests and diseases, understanding mechanisms of host-parasite interactions at the molecular level, development of new-generation pesticides and their carriers, preservation and packaging of food and food additives, strengthening of natural fibers, removal of contaminants from soil and water, improving the shelf-life of vegetables and flowers, clay-based nanoresources for precision water management, reclamation of salt-affected soils, and stabilization of erosion-prone surfaces, to name a few. Keywords: clay minerals, crop production, crop protection, nanotechnology, nanocomposites, nanofabrication, nanotechnology, farming, food

Nanotechnology in biorobotics: opportunities and challenges

International Nuclear Information System (INIS)

Ricotti, Leonardo; Menciassi, Arianna

2015-01-01

Nanotechnology recently opened a series of unexpected technological opportunities that drove the emergence of novel scientific and technological fields, which have the potential to dramatically change the lives of millions of citizens. Some of these opportunities have been already caught by researchers working in the different fields related to biorobotics, while other exciting possibilities still lie on the horizon. This article highlights how nanotechnology applications recently impacted the development of advanced solutions for actuation and sensing and the achievement of microrobots, nanorobots, and non-conventional larger robotic systems. The open challenges are described, together with the most promising research avenues involving nanotechnology

Nanotechnology-Based Drug Delivery Systems for Melanoma Antitumoral Therapy: A Review.

Science.gov (United States)

Rigon, Roberta Balansin; Oyafuso, Márcia Helena; Fujimura, Andressa Terumi; Gonçalez, Maíra Lima; do Prado, Alice Haddad; Gremião, Maria Palmira Daflon; Chorilli, Marlus

2015-01-01

Melanoma (MEL) is a less common type of skin cancer, but it is more aggressive with a high mortality rate. The World Cancer Research Fund International (GLOBOCAN 2012) estimates that there were 230,000 new cases of MEL in the world in 2012. Conventional MEL treatment includes surgery and chemotherapy, but many of the chemotherapeutic agents used present undesirable properties. Drug delivery systems are an alternative strategy by which to carry antineoplastic agents. Encapsulated drugs are advantageous due to such properties as high stability, better bioavailability, controlled drug release, a long blood circulation time, selective organ or tissue distribution, a lower total required dose, and minimal toxic side effects. This review of scientific research supports applying a nanotechnology-based drug delivery system for MEL therapy.

AFM indentation study of breast cancer cells

International Nuclear Information System (INIS)

Li, Q.S.; Lee, G.Y.H.; Ong, C.N.; Lim, C.T.

2008-01-01

Mechanical properties of individual living cells are known to be closely related to the health and function of the human body. Here, atomic force microscopy (AFM) indentation using a micro-sized spherical probe was carried out to characterize the elasticity of benign (MCF-10A) and cancerous (MCF-7) human breast epithelial cells. AFM imaging and confocal fluorescence imaging were also used to investigate their corresponding sub-membrane cytoskeletal structures. Malignant (MCF-7) breast cells were found to have an apparent Young's modulus significantly lower (1.4-1.8 times) than that of their non-malignant (MCF-10A) counterparts at physiological temperature (37 deg. C), and their apparent Young's modulus increase with loading rate. Both confocal and AFM images showed a significant difference in the organization of their sub-membrane actin structures which directly contribute to their difference in cell elasticity. This change may have facilitated easy migration and invasion of malignant cells during metastasis

Green Chemistry for Nanotechnology: Opportunities and Future Challenges

International Nuclear Information System (INIS)

Preeti Nigam, Joshi

2016-01-01

Nanotechnology is a paradigm for emerging technologies and much talked about area of science. It is the technology of future and has revolutionized all fields of medicine, agriculture, environmental and electronics by providing abilities that would never have previously dreamt of. It is a unique platform of multidisciplinary approaches integrating diverse fields of engineering, biology, physics and chemistry. In recent years, nanotechnology has seen the fastest pace in its all aspects of synthesis methodologies and wide applications in all areas of medicine, agricultural, environmental, and electronics. It is the impact of nanotechnology approaches that new fields of nanomedicine, cancer nanotechnology, nanorobotics and nanoelectronics have been emerged and are flourishing with the advances in this expanding field. Nanotechnology holds the potential for pervasive and promising applications and getting significant attention and financial aids also. Although there are different definitions of nanotechnology, in broad prospective, nanotechnology can be described as designing or exploiting materials at nanometer dimensions (i.e., one dimension less than 100 nanometers). At nanoscale, substances have a larger surface area to volume ratio than conventional materials which is the prime reason behind their increased level of reactivity, improved and size tunable magnetic, optical and electrical properties and more toxicity also

Green Chemistry for Nanotechnology: Opportunities and Future Challenges

Energy Technology Data Exchange (ETDEWEB)

Preeti Nigam, Joshi, E-mail: ph.joshi@ncl.res.in [Combichem Bioresource Center, National Chemical Laboratory, Pune (India)

2016-01-26

Nanotechnology is a paradigm for emerging technologies and much talked about area of science. It is the technology of future and has revolutionized all fields of medicine, agriculture, environmental and electronics by providing abilities that would never have previously dreamt of. It is a unique platform of multidisciplinary approaches integrating diverse fields of engineering, biology, physics and chemistry. In recent years, nanotechnology has seen the fastest pace in its all aspects of synthesis methodologies and wide applications in all areas of medicine, agricultural, environmental, and electronics. It is the impact of nanotechnology approaches that new fields of nanomedicine, cancer nanotechnology, nanorobotics and nanoelectronics have been emerged and are flourishing with the advances in this expanding field. Nanotechnology holds the potential for pervasive and promising applications and getting significant attention and financial aids also. Although there are different definitions of nanotechnology, in broad prospective, nanotechnology can be described as designing or exploiting materials at nanometer dimensions (i.e., one dimension less than 100 nanometers). At nanoscale, substances have a larger surface area to volume ratio than conventional materials which is the prime reason behind their increased level of reactivity, improved and size tunable magnetic, optical and electrical properties and more toxicity also.

Nanotechnology in vascular tissue engineering: from nanoscaffolding towards rapid vessel biofabrication.

Science.gov (United States)

Mironov, Vladimir; Kasyanov, Vladimir; Markwald, Roger R

2008-06-01

The existing methods of biofabrication for vascular tissue engineering are still bioreactor-based, extremely expensive, laborious and time consuming and, furthermore, not automated, which would be essential for an economically successful large-scale commercialization. The advances in nanotechnology can bring additional functionality to vascular scaffolds, optimize internal vascular graft surface and even help to direct the differentiation of stem cells into the vascular cell phenotype. The development of rapid nanotechnology-based methods of vascular tissue biofabrication represents one of most important recent technological breakthroughs in vascular tissue engineering because it dramatically accelerates vascular tissue assembly and, importantly, also eliminates the need for a bioreactor-based scaffold cellularization process.

AFM tip-sample convolution effects for cylinder protrusions

Science.gov (United States)

Shen, Jian; Zhang, Dan; Zhang, Fei-Hu; Gan, Yang

2017-11-01

A thorough understanding about the AFM tip geometry dependent artifacts and tip-sample convolution effect is essential for reliable AFM topographic characterization and dimensional metrology. Using rigid sapphire cylinder protrusions (diameter: 2.25 μm, height: 575 nm) as the model system, a systematic and quantitative study about the imaging artifacts of four types of tips-two different pyramidal tips, one tetrahedral tip and one super sharp whisker tip-is carried out through comparing tip geometry dependent variations in AFM topography of cylinders and constructing the rigid tip-cylinder convolution models. We found that the imaging artifacts and the tip-sample convolution effect are critically related to the actual inclination of the working cantilever, the tip geometry, and the obstructive contacts between the working tip's planes/edges and the cylinder. Artifact-free images can only be obtained provided that all planes and edges of the working tip are steeper than the cylinder sidewalls. The findings reported here will contribute to reliable AFM characterization of surface features of micron or hundreds of nanometers in height that are frequently met in semiconductor, biology and materials fields.

New Dimensions for Manufacturing: A UK Strategy for Nanotechnology

National Research Council Canada - National Science Library

Taylor, John M

2002-01-01

... R&D for nanotechnology. This report, of the UK Advisory Group on Nanotechnology Applications, examines the growth of nanotechnology, its potential implications for industry in the UK, and proposes the elements of a strategy...

Nanotechnology development in Denmark - Environmental opportunities and risk

DEFF Research Database (Denmark)

Andersen, M.M.; Rasmussen, B.

2006-01-01

The present report represents the nanostudy part of a larger study entitled “Green Technology Foresight about Environmentally Friendly Products and Materials – Challenges from Nanotechnology, Biotechnology and ICT” (Jørgensen et al. 2006). The study wasmade for the Danish Environmental Protection...... (forthcoming in summer 2006). The analysis focuses not only on the environmental impact but even more on the dynamics involved in nanotechnology development ofwhich we currently know very little. Applying an innovation economic perspective focus is placed on analysing the direction of the nano search...... and technology development processes and how environmental issues enter into these. Hereby, the futuretrajectories of nanotechnology development is sought captured, indicating likely long-term perspectives of the Danish nanotechnology development. The content of the report is as follows: What is nanotechnology...

How nanotechnology works in medicine

OpenAIRE

Arshpreet Kaur; Ms. Amandeep Kaur; Ms. Nitika Shahi

2012-01-01

Nanomedicine is the medical application of nanotechnology. Nanomedicine ranges from the medical applications of nanomaterials, to nanoelectronic biosensors, and even possible future applications of molecular nanotechnology. Current problems for nanomedicine involve understanding the issues related to toxicity and environmental impact of nanoscale materials. Nanomedicine seeks to deliver a valuable set of research tools and clinically useful devices in the near future. The National Nanotechnol...

Political incentives towards replacing animal testing in nanotechnology?

Science.gov (United States)

Sauer, Ursula G

2009-01-01

The Treaty of Lisbon requests the European Union and the Member States to pay full regard to animal welfare issues when implementing new policies. The present article discusses how these provisions are met in the emerging area of nanotechnology. Political action plans in Europe take into account animal welfare issues to some extent. Funding programmes promote the development of non-animal test methods, however only in the area of nanotoxicology and also here not sufficiently to "pay full regard" to preventing animal testing, let alone to bring about a paradigm change in toxicology or in biomedical research as such. Ethical deliberations on nanotechnology, which influence future policies, so far do not address animal welfare at all. Considering that risk assessment of nanoproducts is conceived as a key element to protect human dignity, ethical deliberations should address the choice of the underlying testing methods and call for basing nanomaterial safety testing upon the latest scientific--and ethically acceptable--technologies. Finally, public involvement in the debate on nanotechnology should take into account information on resulting animal experiments.

High precision attachment of silver nanoparticles on AFM tips by dielectrophoresis.

Science.gov (United States)

Leiterer, Christian; Wünsche, Erik; Singh, Prabha; Albert, Jens; Köhler, Johann M; Deckert, Volker; Fritzsche, Wolfgang

2016-05-01

AFM tips are modified with silver nanoparticles using an AC electrical field. The used technique works with sub-micron precision and also does not require chemical modification of the tip. Based on the electrical parameters applied in the process, particle density and particle position on the apex of the tip can be adjusted. The feasibility of the method is proven by subsequent tip-enhanced Raman spectroscopy (TERS) measurements using the fabricated tips as a measurement probe. Since this modification process itself does not require any lithographic processing, the technique can be easily adapted to modify AFM tips with a variety of nanostructures with pre-defined properties, while being parallelizable for a potential commercial application.

The current state of public understanding of nanotechnology

International Nuclear Information System (INIS)

Waldron, Anna M; Spencer, Douglas; Batt, Carl A

2006-01-01

The growing importance of nanotechnology in industry and society has not been accompanied by a widespread understanding of the subject among the general public. Simple questions to initially probe the smallest thing that people can see and can think of reveals a divide in the understanding of the general public. A survey of 1500 individuals ranging in age from 6 to 74 has revealed a lack of knowledge of nanotechnology and especially a lack of understanding of the context of nanotechnology in the world that is too small to see. Survey findings are corroborated by in-depth interviews with 400 adults in studies of nanoscience literacy commisioned by University of California, Berkeley and Cornell in 2002 and 2004, respectively. In general, with the exception of 14-28 year olds, over 60% of respondents say they have never heard of nano or nanotechnology. The results suggest that the general public, especially middle-school children, has no firm foundation to understand nanotechnology and likely will continue to be equally impressed by credible scientific information as well as pure fictional accounts of nanotechnology

The current state of public understanding of nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Waldron, Anna M [Cornell University, Nanobiotechnology Center (United States)], E-mail: amw37@cornell.edu; Spencer, Douglas [Edu, Inc. (United States); Batt, Carl A [Cornell University (United States)

2006-10-15

The growing importance of nanotechnology in industry and society has not been accompanied by a widespread understanding of the subject among the general public. Simple questions to initially probe the smallest thing that people can see and can think of reveals a divide in the understanding of the general public. A survey of 1500 individuals ranging in age from 6 to 74 has revealed a lack of knowledge of nanotechnology and especially a lack of understanding of the context of nanotechnology in the world that is too small to see. Survey findings are corroborated by in-depth interviews with 400 adults in studies of nanoscience literacy commisioned by University of California, Berkeley and Cornell in 2002 and 2004, respectively. In general, with the exception of 14-28 year olds, over 60% of respondents say they have never heard of nano or nanotechnology. The results suggest that the general public, especially middle-school children, has no firm foundation to understand nanotechnology and likely will continue to be equally impressed by credible scientific information as well as pure fictional accounts of nanotechnology.

Microspheres and Nanotechnology for Drug Delivery.

Science.gov (United States)

Jóhannesson, Gauti; Stefánsson, Einar; Loftsson, Thorsteinn

2016-01-01

Ocular drug delivery to the posterior segment of the eye can be accomplished by invasive drug injections into different tissues of the eye and noninvasive topical treatment. Invasive treatment involves the risks of surgical trauma and infection, and conventional topical treatments are ineffective in delivering drugs to the posterior segment of the eye. In recent years, nanotechnology has become an ever-increasing part of ocular drug delivery. In the following, we briefly review microspheres and nanotechnology for drug delivery to the eye, including different forms of nanotechnology such as nanoparticles, microparticles, liposomes, microemulsions and micromachines. The permeation barriers and anatomical considerations linked to ocular drug delivery are discussed and a theoretical overview on drug delivery through biological membranes is given. Finally, in vitro, in vivo and human studies of x03B3;-cyclodextrin nanoparticle eyedrop suspensions are discussed as an example of nanotechnology used for drug delivery to the eye. © 2016 S. Karger AG, Basel.

Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

International Nuclear Information System (INIS)

Ganesh Pillai, Rajani; Bezbaruah, Achintya N.

2017-01-01

Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

Perceptions and attitude effects on nanotechnology acceptance: an exploratory framework

Energy Technology Data Exchange (ETDEWEB)

Ganesh Pillai, Rajani, E-mail: rajani.pillai@ndsu.edu [North Dakota State University, Department of Management and Marketing, College of Business (United States); Bezbaruah, Achintya N., E-mail: a.bezbaruah@ndsu.edu [North Dakota State University, Civil and Environmental Engineering (United States)

2017-02-15

Existing literature in people’s attitude toward nanotechnology and acceptance of nanotechnology applications has generally investigated the impact of factors at the individual or context levels. While this vast body of research is very informative, a comprehensive understanding of how attitude toward nanotechnology are formed and factors influencing the acceptance of nanotechnology are elusive. This paper proposes an exploratory nanotechnology perception-attitude-acceptance framework (Nano-PAAF) to build a systematic understanding of the phenomenon. The framework proposes that perceptions of risks and benefits of nanotechnology are influenced by cognitive, affective, and sociocultural factors. The sociodemographic factors of consumers and contextual factors mitigate the influence of cognitive, affective, and sociocultural factors on the perception of risks and benefits. The perceived risks and benefits in turn influence people’s attitude toward nanotechnology, which then influences acceptance of nanotechnology products. This framework will need further development over time to incorporate emerging knowledge and is expected to be useful for researchers, decision and policy makers, industry, and business entities.

Medical applications of nanotechnology.

Science.gov (United States)

Zdrojewicz, Zygmunt; Waracki, Mateusz; Bugaj, Bartosz; Pypno, Damian; Cabała, Krzysztof

2015-10-29

Nanotechnologies are new areas of research focusing on affecting matter at the atomic and molecular levels. It is beyond doubt that modern medicine can benefit greatly from it; thus nanomedicine has become one of the main branches of nanotechnological research. Currently it focuses on developing new methods of preventing, diagnosing and treating various diseases. Nanomaterials show very high efficiency in destroying cancer cells and are already undergoing clinical trials. The results are so promising that nanomaterials might become an alternative to traditional cancer therapy, mostly due to the fact that they allow cancer cells to be targeted specifically and enable detailed imaging of tissues, making planning further therapy much easier. Nanoscience might also be a source of the needed breakthrough in the fight against atherosclerosis, since nanostructures may be used in both preventing and increasing the stability of atherosclerotic lesions. One area of interest is creating nanomaterials that are not only efficient, but also well tolerated by the human body. Other potential applications of nanotechnology in medicine include: nanoadjuvants with immunomodulatory properties used to deliver vaccine antigens; the nano-knife, an almost non-invasive method of destroying cancer cells with high voltage electricity; and carbon nanotubes, which are already a popular way of repairing damaged tissues and might be used to regenerate nerves in the future. The aim of this article is to outline the potential uses of nanotechnology in medicine. Original articles and reviews have been used to present the new developments and directions of studies.

Investigation of geometrical effects in the carbon allotropes manipulation based on AFM: multiscale approach

Energy Technology Data Exchange (ETDEWEB)

Korayem, M. H., E-mail: hkorayem@iust.ac.ir; Hefzabad, R. N.; Homayooni, A.; Aslani, H. [Iran University of Science and Technology, Robotic Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering (Iran, Islamic Republic of)

2017-01-15

Carbon allotropes are used as nanocarriers for drug and cell delivery. To obtain an accurate result in the nanoscale, it is important to use a precise model. In this paper, a multiscale approach is presented to investigate the manipulation process of carbon allotropes based on atomic force microscopy (AFM). For this purpose, the AFM setup is separated into two parts with different sizes as macro field (MF) and nano field (NF). Using Kirchhoff’s plate model, the cantilever (the main part of MF) is modeled. The molecular dynamics method is applied to model the NF part, and then the MF and NF are coupled with the multiscale algorithm. With this model, by considering the effect of size and shape, the manipulation of carbon allotropes is carried out. The manipulations of armchair CNTs and fullerenes are performed to study the diameter changing effects. The result shows that the manipulation and friction force increases by increasing the diameter. The result of the indentation depth for the armchair CNTs indicates that decreasing the diameter causes the indentation depth to reduce. Moreover, the manipulations of four kinds of carbon allotropes with the same number of atoms have been studied to investigate the geometrical effects. The shapes of these nanoparticles change from sphere to cylinder. The results illustrate that the manipulation and the friction force decrease as the nanoparticle shape varies from sphere to cylinder. The Von-Mises results demonstrate that by changing the nanoparticle shape from the spherical to the cylindrical form, the stress increases, although the manipulation force reduces.

Investigation of geometrical effects in the carbon allotropes manipulation based on AFM: multiscale approach

International Nuclear Information System (INIS)

Korayem, M. H.; Hefzabad, R. N.; Homayooni, A.; Aslani, H.

2017-01-01

Carbon allotropes are used as nanocarriers for drug and cell delivery. To obtain an accurate result in the nanoscale, it is important to use a precise model. In this paper, a multiscale approach is presented to investigate the manipulation process of carbon allotropes based on atomic force microscopy (AFM). For this purpose, the AFM setup is separated into two parts with different sizes as macro field (MF) and nano field (NF). Using Kirchhoff’s plate model, the cantilever (the main part of MF) is modeled. The molecular dynamics method is applied to model the NF part, and then the MF and NF are coupled with the multiscale algorithm. With this model, by considering the effect of size and shape, the manipulation of carbon allotropes is carried out. The manipulations of armchair CNTs and fullerenes are performed to study the diameter changing effects. The result shows that the manipulation and friction force increases by increasing the diameter. The result of the indentation depth for the armchair CNTs indicates that decreasing the diameter causes the indentation depth to reduce. Moreover, the manipulations of four kinds of carbon allotropes with the same number of atoms have been studied to investigate the geometrical effects. The shapes of these nanoparticles change from sphere to cylinder. The results illustrate that the manipulation and the friction force decrease as the nanoparticle shape varies from sphere to cylinder. The Von-Mises results demonstrate that by changing the nanoparticle shape from the spherical to the cylindrical form, the stress increases, although the manipulation force reduces.

Methodological proposal for occupational health and safety actions in research laboratories with nanotechnologies activities.

Science.gov (United States)

Andrade, Luís Renato Balbão; Amaral, Fernando Gonçalves

2012-01-01

Nanotechnologies is a multidisciplinary set of techniques to manipulate matter on nanoscale level, more precisely particles below 100 nm whose characteristic due to small size is essentially different from those found in macro form materials. Regarding to these new properties of the materials there are knowledge gaps about the effects of these particles on human organism and the environment. Although it still being considered emerging technology it is growing increasingly fast as well as the number of products using nanotechnologies in some production level and so the number of researchers involved with the subject. Given this scenario and based on literature related, a comprehensive methodology for health and safety at work for researching laboratories with activities in nanotechnologies was developed, based on ILO structure guidelines for safety and health at work system on which a number of nanospecific recommendations were added to. The work intends to offer food for thought on controlling risks associated to nanotechnologies.

Lipid Nanotechnology

NARCIS (Netherlands)

Mashaghi, Samaneh; Jadidi, Tayebeh; Koenderink, Gijsje; Mashaghi, Alireza

2013-01-01

Nanotechnology is a multidisciplinary field that covers a vast and diverse array of devices and machines derived from engineering, physics, materials science, chemistry and biology. These devices have found applications in biomedical sciences, such as targeted drug delivery, bio-imaging, sensing and

Toward the Responsible Development and Commercialization of Sensor Nanotechnologies.

Science.gov (United States)

Fadel, Tarek R; Farrell, Dorothy F; Friedersdorf, Lisa E; Griep, Mark H; Hoover, Mark D; Meador, Michael A; Meyyappan, M

2016-01-01

Nanotechnology-enabled sensors (or nanosensors) will play an important role in enabling the progression toward ubiquitous information systems as the Internet of Things (IoT) emerges. Nanosensors offer new, miniaturized solutions in physiochemical and biological sensing that enable increased sensitivity, specificity, and multiplexing capability, all with the compelling economic drivers of low cost and high-energy efficiency. In the United States, Federal agencies participating in the National Nanotechnology Initiative (NNI) "Nanotechnology for Sensors and Sensors for Nanotechnology: Improving and Protecting Health, Safety, and the Environment" Nanotechnology Signature Initiative (the Sensors NSI), address both the opportunity of using nanotechnology to advance sensor development and the challenges of developing sensors to keep pace with the increasingly widespread use of engineered nanomaterials. This perspective article will introduce and provide background on the NNI signature initiative on sensors. Recent efforts by the Sensors NSI aimed at promoting the successful development and commercialization of nanosensors will be reviewed and examples of sensor nanotechnologies will be highlighted. Future directions and critical challenges for sensor development will also be discussed.

Statistical length of DNA based on AFM image measured by a computer

International Nuclear Information System (INIS)

Chen Xinqing; Qiu Xijun; Zhang Yi; Hu Jun; Wu Shiying; Huang Yibo; Ai Xiaobai; Li Minqian

2001-01-01

Taking advantage of image processing technology, the contour length of DNA molecule was measured automatically by a computer. Based on the AFM image of DNA, the topography of DNA was simulated into a curve. Then the DNA length was measured automatically by inserting mode. It was shown that the experimental length of a naturally deposited DNA (180.4 +- 16.4 nm) was well consistent with the theoretical length (185.0 nm). Comparing to other methods, the present approach had advantages of precision and automatism. The stretched DNA was also measured. It present approach had advantages of precision and automatism. The stretched DNA was also measured. It was shown that the experimental length (343.6 +- 20.7 nm) was much longer than the theoretical length (307.0 nm). This result indicated that the stretching process had a distinct effect on the DNA length. However, the method provided here avoided the DNA-stretching effect

Nanotechnology in food processing sector-An assessment of emerging trends.

Science.gov (United States)

Kalpana Sastry, R; Anshul, Shrivastava; Rao, N H

2013-10-01

Use of nanoscience based technology in the food industry is fast emerging as new area for research and development. Several research groups including private companies in the industry have initiated research programmes for exploring the wide scope of nanotechnology into the value chain of food processing and manufacturing. This paper discusses the current focus of research in this area and assesses its potential impacts. Using the developed relational database framework with R&D indicators like literature and patent documents for assessment of the potential of nanotechnology in food sector, a model to organize and map nanoresearch areas to the food processing sector was developed. The study indicates that the about five basic categories of nanotechnology applications and functionalities currently in the development of food sector, include food processing, packaging, nutraceuticals delivery, food safety and functional foods.

Statistical flaw strength distributions for glass fibres: Correlation between bundle test and AFM-derived flaw size density functions

International Nuclear Information System (INIS)

Foray, G.; Descamps-Mandine, A.; R’Mili, M.; Lamon, J.

2012-01-01

The present paper investigates glass fibre flaw size distributions. Two commercial fibre grades (HP and HD) mainly used in cement-based composite reinforcement were studied. Glass fibre fractography is a difficult and time consuming exercise, and thus is seldom carried out. An approach based on tensile tests on multifilament bundles and examination of the fibre surface by atomic force microscopy (AFM) was used. Bundles of more than 500 single filaments each were tested. Thus a statistically significant database of failure data was built up for the HP and HD glass fibres. Gaussian flaw distributions were derived from the filament tensile strength data or extracted from the AFM images. The two distributions were compared. Defect sizes computed from raw AFM images agreed reasonably well with those derived from tensile strength data. Finally, the pertinence of a Gaussian distribution was discussed. The alternative Pareto distribution provided a fair approximation when dealing with AFM flaw size.

Refining the statistical model for quantitative immunostaining of surface-functionalized nanoparticles by AFM.

Science.gov (United States)

MacCuspie, Robert I; Gorka, Danielle E

2013-10-01

Recently, an atomic force microscopy (AFM)-based approach for quantifying the number of biological molecules conjugated to a nanoparticle surface at low number densities was reported. The number of target molecules conjugated to the analyte nanoparticle can be determined with single nanoparticle fidelity using antibody-mediated self-assembly to decorate the analyte nanoparticles with probe nanoparticles (i.e., quantitative immunostaining). This work refines the statistical models used to quantitatively interpret the observations when AFM is used to image the resulting structures. The refinements add terms to the previous statistical models to account for the physical sizes of the analyte nanoparticles, conjugated molecules, antibodies, and probe nanoparticles. Thus, a more physically realistic statistical computation can be implemented for a given sample of known qualitative composition, using the software scripts provided. Example AFM data sets, using horseradish peroxidase conjugated to gold nanoparticles, are presented to illustrate how to implement this method successfully.

[Efficacy of a new fenbendazole formulation produced by nanotechnology-based drug delivery system against nematodosis].

Science.gov (United States)

Varlamova, A I; Arkhipov, I A; Odoevskaia, I M; Danilevskaia, N V; Khalikov, S S; Chistiachenko, Iu S; Dushkin, A V

2014-01-01

The efficacy of a new fenbendazile formulation produced by nanotechnology-based drug delivery system was investigated in45 sheep naturally infected with gastrointestinal nematodes. The formulation showed 95.6% efficacy against Nematodes spp. at a dose of 1.0 mg/kg dw of its active ingredient and 100% efficacy against other species of gastrointestinal nematodes. Given at a dose of 10 mg/kg dw, the basic drug--fenbendazole (substance) displayed 96.39 and 100% efficacy, respectively.

Effects of AFM tip-based direct and vibration assisted scratching methods on nanogrooves fabrication on a polymer resist

Energy Technology Data Exchange (ETDEWEB)

Geng, Yanquan [The State Key Laboratory of Robotics and Systems, Robotics Institute, Harbin Institute of Technology, Harbin, Heilongjiang 150080 (China); Center for Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Yan, Yongda, E-mail: yanyongda@hit.edu.cn [The State Key Laboratory of Robotics and Systems, Robotics Institute, Harbin Institute of Technology, Harbin, Heilongjiang 150080 (China); Center for Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China); Zhuang, Yun; Hu, Zhenjiang [Center for Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001 (China)

2015-11-30

Graphical abstract: - Highlights: • The comparison of three different atomic force microscope (AFM) tip-based material processing techniques to generate nano-grooves on polymethylmethacrylate (PMMA) thin film is presented. • The machined depths of the nano-grooves machined by these three methods are analyzed. • Nano-groove with the machined depth closed to the thickness of the thin-film resist is achieved. - Abstract: This study proposes two atomic force microscope (AFM) tip-based direct nanoscratching methods including single-pass scratching and multi-pass scratching compared with a vibration-assisted scratching method to fabricate nano-grooves on the surface of the polymethylmethacrylate (PMMA) thin-film resist. In order to protect the AFM tip from wearing and optimize the subsequent etching process, the machined depth is expected slightly less than the PMMA thickness to prevent the tip directly contacting with the silicon substrate and obtain better process results. First, single-pass scratching tests are performed on films with different thickness employing varied normal loads. Results show that the machined depths of the grooves cannot be obtained slightly less than the thickness of the film very easily when scratching with single-pass method, 50–120 nm in the present study, which may not be very suitable for the following etching process. Multi-pass and vibration-assisted methods are then utilized to solve this limitation of the machined depth in single-pass process. The machined depths using the multi-pass method are dependent on scratching times and the applied normal loads. Moreover, the depth closed to the thickness of the film can be obtained by enlarging the number of the scratching cycles. However, with a longer scratching time, large tip wear can be found. For vibration assisted method, the machined depths are controlled by the vibration amplitude and the applied normal load. With the vibration in z direction increasing, the machined depth can

AFM (Atomic force microscope and its use in studying the surface

Directory of Open Access Journals (Sweden)

Škvarla Jiří

1996-06-01

Full Text Available The paper summarizes the present knowledge about the use of AFM in the mineral processing research. First, the development and fundamentals of the AFM imaging are presented in relation to other imaging techniques (especially STM, Scanning tunneling microscope. Further, the role of the sensing tip-surface interactions is mentioned. Finally, the surface force measurements in the AFM force calibration mode are diskussed.

Nanotechnology and nuclear medicine; research and preclinical applications.

Science.gov (United States)

Assadi, Majid; Afrasiabi, Kolsoom; Nabipour, Iraj; Seyedabadi, Mohammad

2011-01-01

The birth of nanotechnology in human society was around 2000 years ago and soon found applications in various fields. In this article, we highlight the current status of research and preclinical applications and also future prospects of nanotechnology in medicine and in nuclear medicine. The most important field is cancer. A regular nanotechnology training program for nuclear medicine physicians may be welcome.

AFM study of excimer laser patterning of block-copolymer: Creation of ordered hierarchical, hybrid, or recessed structures

International Nuclear Information System (INIS)

Švanda, Jan; Siegel, Jakub; Švorčík, Vaclav; Lyutakov, Oleksiy

2016-01-01

Highlights: • Combination of bottom-up (BCP separation) and top-down (laser patterning) technologies allows obtaining hierarchical structures. • Surface morphologies were determined by the order of patterning steps (laser modification, annealing, surface reconstruction). • Tuning the order of steps enables the reorientation of BCP domain at large scale, fabrication of hierarchical, hybrid or recessed structures. • The obtained structures can find potential applications in nanotechnology, plasmonics, information storage, sensors and smart surfaces. - Abstract: We report fabrication of the varied range of hierarchical structures by combining bottom-up self-assembly of block copolymer poly(styrene-block-vinylpyridine) (PS-b-P4VP) with top-down excimer laser patterning method. Different procedures were tested, where laser treatment was applied before phase separation and after phase separation or phase separation and surface reconstruction. Laser treatment was performed using either polarized laser light with the aim to create periodical pattern on polymer surface or non-polarized light for preferential removing of polystyrene (PS) part from PS-b-P4VP. Additionally, dye was introduced into one part of block copolymer (P4VP) with the aim to modify its response to laser light. Resulting structures were analyzed by XPS, UV–vis and AFM techniques. Application of polarized laser light leads to creation of structures with hierarchical, recessed or hybrid geometries. Non-polarized laser beam allows pronouncing the block copolymer phase separated structure. Tuning the order of steps or individual step conditions enables the efficient reorientation of block-copolymer domain at large scale, fabrication of hierarchical, hybrid or recessed structures. The obtained structures can find potential applications in nanotechnology, photonics, plasmonics, information storage, optical devices, sensors and smart surfaces.

Fourier Transform Infrared (FTIR) Spectroscopy, Ultraviolet Resonance Raman (UVRR) Spectroscopy, and Atomic Force Microscopy (AFM) for Study of the Kinetics of Formation and Structural Characterization of Tau Fibrils.

Science.gov (United States)

Ramachandran, Gayathri

2017-01-01

Kinetic studies of tau fibril formation in vitro most commonly employ spectroscopic probes such as thioflavinT fluorescence and laser light scattering or negative stain transmission electron microscopy. Here, I describe the use of Fourier transform infrared (FTIR) spectroscopy, ultraviolet resonance Raman (UVRR) spectroscopy, and atomic force microscopy (AFM) as complementary probes for studies of tau aggregation. The sensitivity of vibrational spectroscopic techniques (FTIR and UVRR) to secondary structure content allows for measurement of conformational changes that occur when the intrinsically disordered protein tau transforms into cross-β-core containing fibrils. AFM imaging serves as a gentle probe of structures populated over the time course of tau fibrillization. Together, these assays help further elucidate the structural and mechanistic complexity inherent in tau fibril formation.

NANOTECHNOLOGY WHITE PAPER | Science Inventory | US ...

Science.gov (United States)

Nanotechnology is the science of manipulating materials at the atomic and molecular level to develop new or enhanced materials and products. In December 2004, EPA’s Science Policy Council created a cross-Agency workgroup to identify and describe the issues EPA must address to ensure protection of human health and the environment as this new technology is developed. The draft white paper on nanotechnology is the product of the workgroup. The draft white paper describes the technology, and provides a discussion of the potential environmental benefits of nanotechnology and its applications that can foster sustainable use of resources. Risk management issues and the Agency’s statutory mandates are outlined, followed by an extensive discussion of risk assessment issues. The paper identifies research needs for both environmental applications and implications of nanotechnology and concludes with recommendations on next steps for addressing science policy issues and research needs. Supplemental information is provided in a number of appendices. The Agency will use the white paper to address research needs and risk assessment issues concerning nanotechnology. The draft white paper will undergo independent expert review, which will be conducted in the February time frame. All public comments received by January 31, 2006 will be submitted to the external review panel for their consideration. Comments received beyond that time will be considered by EPA. Follo

Helium ion beam induced growth of hammerhead AFM probes

NARCIS (Netherlands)

Nanda, G.; Veldhoven, E. van; Maas, D.J.; Sadeghian Marnani, H.; Alkemade, P.F.A.

2015-01-01

The authors report the direct-write growth of hammerhead atomic force microscope (AFM) probes by He+ beam induced deposition of platinum-carbon. In order to grow a thin nanoneedle on top of a conventional AFM probe, the authors move a focused He+ beam during exposure to a PtC precursor gas. In the

Nanotechnology and bone healing.

Science.gov (United States)

Harvey, Edward J; Henderson, Janet E; Vengallatore, Srikar T

2010-03-01

Nanotechnology and its attendant techniques have yet to make a significant impact on the science of bone healing. However, the potential benefits are immediately obvious with the result that hundreds of researchers and firms are performing the basic research needed to mature this nascent, yet soon to be fruitful niche. Together with genomics and proteomics, and combined with tissue engineering, this is the new face of orthopaedic technology. The concepts that orthopaedic surgeons recognize are fabrication processes that have resulted in porous implant substrates as bone defect augmentation and medication-carrier devices. However, there are dozens of applications in orthopaedic traumatology and bone healing for nanometer-sized entities, structures, surfaces, and devices with characteristic lengths ranging from 10s of nanometers to a few micrometers. Examples include scaffolds, delivery mechanisms, controlled modification of surface topography and composition, and biomicroelectromechanical systems. We review the basic science, clinical implications, and early applications of the nanotechnology revolution and emphasize the rich possibilities that exist at the crossover region between micro- and nanotechnology for developing new treatments for bone healing.

Recent developments in nanotechnology transforming the agricultural sector: a transition replete with opportunities.

Science.gov (United States)

Kim, Dae-Young; Kadam, Avinash; Shinde, Surendra; Saratale, Rijuta Ganesh; Patra, Jayanta; Ghodake, Gajanan

2018-02-01

The applications and benefits of nanotechnology in the agricultural sector have attracted considerable attention, particularly in the invention of unique nanopesticides and nanofertilisers. The contemporary developments in nanotechnology are acknowledged and the most significant opportunities awaiting the agriculture sector from the recent scientific and technical literature are addressed. This review discusses the significance of recent trends in nanomaterial-based sensors available for the sustainable management of agricultural soil, as well as the role of nanotechnology in detection and protection against plant pathogens, and for food quality and safety. Novel nanosensors have been reported for primary applications in improving crop practices, food quality, and packaging methods, thus will change the agricultural sector for potentially better and healthier food products. Nanotechnology is well-known to play a significant role in the effective management of phytopathogens, nutrient utilisation, controlled release of pesticides, and fertilisers. Research and scientific gaps to be overcome and fundamental questions have been addressed to fuel active development and application of nanotechnology. Together, nanoscience, nanoengineering, and nanotechnology offer a plethora of opportunities, proving a viable alternative in the agriculture and food processing sector, by providing a novel and advanced solutions. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Immobilisation of living bacteria for AFM imaging under physiological conditions

International Nuclear Information System (INIS)

Louise Meyer, Rikke; Zhou, Xingfei; Tang, Lone; Arpanaei, Ayyoob; Kingshott, Peter; Besenbacher, Flemming

2010-01-01

Atomic force microscopy (AFM) holds great potential for studying the nanoscale surface structures of living cells, and to measure their interactions with abiotic surfaces, other cells, or specific biomolecules. However, the application of AFM in microbiology is challenging due to the difficulty of immobilising bacterial cells to a flat surface without changing the cell surface properties or cell viability. We have performed an extensive and thorough study of how to functionalise surfaces in order to immobilise living bacteria for AFM studies in liquid environments. Our aim was to develop a scheme which allows bacterial cells to be immobilised to a flat surface with sufficient strength to avoid detachment during the AFM scanning, and without affecting cell surface chemistry, structure, and viability. We compare and evaluate published methods, and present a new, reproducible, and generally applicable scheme for immobilising bacteria cells for an AFM imaging. Bacterial cells were immobilised to modified glass surfaces by physical confinement of cells in microwells, physisorption to positively charged surfaces, covalent binding to amine- or carboxyl-terminated surfaces, and adsorption to surfaces coated with highly adhesive polyphenolic proteins originating from the mussel Mytilus edulis. Living cells could be immobilised with all of these approaches, but many cells detached when immobilised by electrostatic interactions and imaged in buffers like PBS or MOPS. Cells were more firmly attached when immobilised by covalent binding, although some cells still detached during AFM imaging. The most successful method revealed was immobilisation by polyphenolic proteins, which facilitated firm immobilisation of the cells. Furthermore, the cell viability was not affected by this immobilisation scheme, and adhesive proteins thus provide a fast, reproducible, and generally applicable scheme for immobilising living bacteria for an AFM imaging.

The intertwine of nanotechnology with the food industry.

Science.gov (United States)

Hamad, Alshammari Fanar; Han, Jong-Hun; Kim, Byung-Chun; Rather, Irfan A

2018-01-01

The past decade has proven the competence of nanotechnology in almost all known fields. The evolution of nanotechnology today in the area of the food industry has been largely and has had a lot of contribution in the food processing, food package, and food preservation. The increasing global human population has come with growing population to be fed, and food production is not adjusted to at par with the growing population. This mismatch has shown the real essence of food preservation so that food products can reach to people on a global scale. The introduction of nanotechnology in the food industry has made it easy to transport foods to different parts of the world by extending the shelf-life of most food products. Even with this beneficial aspect of nanotechnology, it has not been proven an entire full-proof measure, and the field is still open to changing technology. It suffices to note that nanotechnology has to a big extent succeed in curbing the extent of food wastage due to food spoilage by the microbial infestation. Nanotechnology has focused on fresh foods, ensuring a healthier food by employing nano-delivery systems in the process. The delivery systems are the ones, which carries the food supplements. However, these are certain sets of regulations that must be followed to tame or control the health related risks of nanotechnology in food industries. This paper outlines the role of nanotechnology at different levels of the food industry including, packaging of food, processing of food and the various preservation techniques all aiming to increase the shelf life of the food products.

Nanotechnology Education: Contemporary Content and Approaches

Science.gov (United States)

Ernst, Jeremy V.

2009-01-01

Nanotechnology is a multidisciplinary field of research and development identified as a major priority in the United States. Progress in science and engineering at the nanoscale is critical for national security, prosperity of the economy, and enhancement of the quality of life. It is anticipated that nanotechnology will be a major transitional…

Nanotechnology for forest products. Part 2

Science.gov (United States)

Theodore Wegner; Phil Jones

2005-01-01

In planning for the Nanotechnology for the Forest products Industry Workshop, we considered many different options for organizing technical focus areas for breakout discussion sessions. We felt the fallowing R&D focus areas provide the best path forward for a nanotechnology roadmap by identifying the underlying science and technology needed: also, they foster...

Nano-technology and nano-toxicology.

Science.gov (United States)

Maynard, Robert L

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of exposure to nano-materials and relates these to the evidence of the effects on health of the ambient aerosol. A number of hypotheses are proposed and the dangers of adopting unsubstantiated hypotheses are stressed. Nano-toxicology presents many challenges and will need substantial financial support if it is to develop at a rate sufficient to cope with developments in nano-technology.

A Study of Moisture Damage in Plastomeric Polymer Modified Asphalt Binder Using Functionalized AFM Tips

Directory of Open Access Journals (Sweden)

Rafiqul Tarefder

2011-12-01

Full Text Available In this study, moisture damage in plastomeric polymer modified asphalt binder is investigated using Atomic Force Microscopy (AFM with chemically functionalized AFM tips. Four different percentages of plastomeric polymers and two antistripping agents such as Kling Beta and Lime are used to modify a base asphalt binder. Chemical functional groups such as -COOH, -CH3, -NH3, and –OH, that are commonly present in plastomeric polymer modified asphalt system, are used to functionalize the AFM tips. The force distance mode of AFM is used to measure the adhesion forces between a modified asphalt sample surface and the functionalized AFM tips. This enables the measurement of adhesion within an asphalt binder system. It is shown that the adhesion force values in dry sample changed substantially from that in wet conditioned samples. It is evident from this study that plastomeric modification does not help reduce moisture damage in asphalt. The percentage change in adhesion forces due to moisture is about 20 nN for the lime modified samples, and about 50 nN for the Kling Beta modified samples. This indicates that lime is more effective than Kling Beta for reducing moisture damage in plastomeric polymer modified asphalt.

Nanotechnology and its applications in the food sector.

Science.gov (United States)

Sozer, Nesli; Kokini, Jozef L

2009-02-01

Nanoscience and nanotechnology are new frontiers of this century. Their applications to the agriculture and food sector are relatively recent compared with their use in drug delivery and pharmaceuticals. Smart delivery of nutrients, bioseparation of proteins, rapid sampling of biological and chemical contaminants and nanoencapsulation of nutraceuticals are some of the emerging topics of nanotechnology for food and agriculture. Advances in technologies, such as DNA microarrays, microelectromechanical systems and microfluidics, will enable the realization of the potential of nanotechnology for food applications. In this review, we intended to summarize the applications of nanotechnology relevant to food and nutraceuticals together with identifying the outstanding challenges.

Nanoparticles, nanotechnology and pulmonary nanotoxicology

OpenAIRE

Ferreira, AJ; Cemlyn-Jones, J; Robalo-Cordeiro, C

2012-01-01

The recently emergent field of Nanotechnology involves the production and use of structures at the nanoscale. Research at atomic, molecular or macromolecular levels, has led to new materials, systems and structures on a scale consisting of particles less than 100 nm and showing unique and unusual physical, chemical and biological properties, which has enabled new applications in diverse fields, creating a multimillion-dollar high-tech industry. Nanotechnologies have a wide variety of uses fro...

High-resolution AFM structure of DNA G-wires in aqueous solution.

Science.gov (United States)

Bose, Krishnashish; Lech, Christopher J; Heddi, Brahim; Phan, Anh Tuân

2018-05-17

We investigate the self-assembly of short pieces of the Tetrahymena telomeric DNA sequence d[G 4 T 2 G 4 ] in physiologically relevant aqueous solution using atomic force microscopy (AFM). Wire-like structures (G-wires) of 3.0 nm height with well-defined surface periodic features were observed. Analysis of high-resolution AFM images allowed their classification based on the periodicity of these features. A major species is identified with periodic features of 4.3 nm displaying left-handed ridges or zigzag features on the molecular surface. A minor species shows primarily left-handed periodic features of 2.2 nm. In addition to 4.3 and 2.2 nm ridges, background features with periodicity of 0.9 nm are also observed. Using molecular modeling and simulation, we identify a molecular structure that can explain both the periodicity and handedness of the major G-wire species. Our results demonstrate the potential structural diversity of G-wire formation and provide valuable insight into the structure of higher-order intermolecular G-quadruplexes. Our results also demonstrate how AFM can be combined with simulation to gain insight into biomolecular structure.

Nanotechnology risk perceptions and communication: emerging technologies, emerging challenges.

Science.gov (United States)

Pidgeon, Nick; Harthorn, Barbara; Satterfield, Terre

2011-11-01

Nanotechnology involves the fabrication, manipulation, and control of materials at the atomic level and may also bring novel uncertainties and risks. Potential parallels with other controversial technologies mean there is a need to develop a comprehensive understanding of processes of public perception of nanotechnology uncertainties, risks, and benefits, alongside related communication issues. Study of perceptions, at so early a stage in the development trajectory of a technology, is probably unique in the risk perception and communication field. As such it also brings new methodological and conceptual challenges. These include: dealing with the inherent diversity of the nanotechnology field itself; the unfamiliar and intangible nature of the concept, with few analogies to anchor mental models or risk perceptions; and the ethical and value questions underlying many nanotechnology debates. Utilizing the lens of social amplification of risk, and drawing upon the various contributions to this special issue of Risk Analysis on Nanotechnology Risk Perceptions and Communication, nanotechnology may at present be an attenuated hazard. The generic idea of "upstream public engagement" for emerging technologies such as nanotechnology is also discussed, alongside its importance for future work with emerging technologies in the risk communication field. © 2011 Society for Risk Analysis.

Medical applications of nanotechnology

Directory of Open Access Journals (Sweden)

Zygmunt Zdrojewicz

2015-10-01

Full Text Available Nanotechnologies are new areas of research focusing on affecting matter at the atomic and molecular levels. It is beyond doubt that modern medicine can benefit greatly from it; thus nanomedicine has become one of the main branches of nanotechnological research. Currently it focuses on developing new methods of preventing, diagnosing and treating various diseases. Nanomaterials show very high efficiency in destroying cancer cells and are already undergoing clinical trials. The results are so promising that nanomaterials might become an alternative to traditional cancer therapy, mostly due to the fact that they allow cancer cells to be targeted specifically and enable detailed imaging of tissues, making planning further therapy much easier. Nanoscience might also be a source of the needed breakthrough in the fight against atherosclerosis, since nanostructures may be used in both preventing and increasing the stability of atherosclerotic lesions. One area of interest is creating nanomaterials that are not only efficient, but also well tolerated by the human body. Other potential applications of nanotechnology in medicine include: nanoadjuvants with immunomodulatory properties used to deliver vaccine antigens; the nano-knife, an almost non-invasive method of destroying cancer cells with high voltage electricity; and carbon nanotubes, which are already a popular way of repairing damaged tissues and might be used to regenerate nerves in the future.The aim of this article is to outline the potential uses of nanotechnology in medicine. Original articles and reviews have been used to present the new developments and directions of studies.

Relevance of nanotechnology to Africa: synthesis, applications and safety

CSIR Research Space (South Africa)

Musee, N

2012-07-01

Full Text Available In this chapter, two nanotechnology-based applications relevant to Africa in promoting sustainability and achievement of the Millennium Development Goals (MDGs) are presented. The applications comprise the provision of therapeutic treatment...

The Peculiarities of Cluster Formation in the Russian Nanotechnology Industry

Directory of Open Access Journals (Sweden)

Kurchenkov Vladimir Viktorovich

2015-05-01

Full Text Available The innovative development of the Russian economy in modern conditions should be based on the development of advanced nanotechnology. The formation of the nanotechnology industry in Russia requires optimal organization, the development of networking, the search for new forms of integrating the primary and secondary productions. The cluster organization in nanotech industry is based on high-tech production and has a number of advantages: uncertainty elimination, restriction of the competition by monopolization of supply with raw materials and semi-finished products, improvement of quality and decrease in expenses. The main forms of interaction of the enterprises and organizations which are a part of a nanoindustrial cluster are allocated. The article describes the peculiarities of the Russian nanoidustry formation, determines the significance of the cluster policy in this sphere. The author develops the criteria for identifying the nanoclusters on the basis of the basic nanotechnology and the nomenclature of final product. The author also proposes the approach to the analysis of cluster interaction and determines the boundaries of the cluster based on the difference between system and quasisystem cluster interaction. In this regard it is necessary to consider possibilities of the analysis of both system, and quasisystem interaction of the main participants of a nanoindustrial cluster.

Nanotechnology Research: Applications in Nutritional Sciences12

Science.gov (United States)

Srinivas, Pothur R.; Philbert, Martin; Vu, Tania Q.; Huang, Qingrong; Kokini, Josef L.; Saos, Etta; Chen, Hongda; Peterson, Charles M.; Friedl, Karl E.; McDade-Ngutter, Crystal; Hubbard, Van; Starke-Reed, Pamela; Miller, Nancy; Betz, Joseph M.; Dwyer, Johanna; Milner, John; Ross, Sharon A.

2010-01-01

The tantalizing potential of nanotechnology is to fabricate and combine nanoscale approaches and building blocks to make useful tools and, ultimately, interventions for medical science, including nutritional science, at the scale of ∼1–100 nm. In the past few years, tools and techniques that facilitate studies and interventions in the nanoscale range have become widely available and have drawn widespread attention. Recently, investigators in the food and nutrition sciences have been applying the tools of nanotechnology in their research. The Experimental Biology 2009 symposium entitled “Nanotechnology Research: Applications in Nutritional Sciences” was organized to highlight emerging applications of nanotechnology to the food and nutrition sciences, as well as to suggest ways for further integration of these emerging technologies into nutrition research. Speakers focused on topics that included the problems and possibilities of introducing nanoparticles in clinical or nutrition settings, nanotechnology applications for increasing bioavailability of bioactive food components in new food products, nanotechnology opportunities in food science, as well as emerging safety and regulatory issues in this area, and the basic research applications such as the use of quantum dots to visualize cellular processes and protein-protein interactions. The session highlighted several emerging areas of potential utility in nutrition research. Nutrition scientists are encouraged to leverage ongoing efforts in nanomedicine through collaborations. These efforts could facilitate exploration of previously inaccessible cellular compartments and intracellular pathways and thus uncover strategies for new prevention and therapeutic modalities. PMID:19939997

Accuracy optimization of high-speed AFM measurements using Design of Experiments

DEFF Research Database (Denmark)

Tosello, Guido; Marinello, F.; Hansen, Hans Nørgaard

2010-01-01

Atomic Force Microscopy (AFM) is being increasingly employed in industrial micro/nano manufacturing applications and integrated into production lines. In order to achieve reliable process and product control at high measuring speed, instrument optimization is needed. Quantitative AFM measurement...... results are influenced by a number of scan settings parameters, defining topography sampling and measurement time: resolution (number of profiles and points per profile), scan range and direction, scanning force and speed. Such parameters are influencing lateral and vertical accuracy and, eventually......, the estimated dimensions of measured features. The definition of scan settings is based on a comprehensive optimization that targets maximization of information from collected data and minimization of measurement uncertainty and scan time. The Design of Experiments (DOE) technique is proposed and applied...

Chemical engineers, nanotechnology and future green economy

CSIR Research Space (South Africa)

Musee, N

2012-01-01

Full Text Available Nanotechnology is envisaged to address present human needs and secure living comforts of future generations cheaply, faster and more cleanly. To date, nanotechnology's impact on the economy and on our daily lives has been enormous....

Nanotechnology tolls the bell for plastic surgeons.

Science.gov (United States)

Salehahmadi, Zeinab; Hajiliasgari, Fatemeh

2013-06-01

Nanotechnology is an emerging discipline, having power to revolutionarize every scientific field to a very deep level which previously thought to be a science fiction. Having a great potential to beneficially change the way a disease is diagnosed, treated and prevented, nanotechnology practically impacts on state of the art healthcare technologies and plays a crucial role in changing the field of surgery. Surgeons are constantly looking for minimally invasive ways to treat their patients, as recovery is faster when a lesser trauma is inflicted upon a patient, scarring is lessened and there are usually fewer complications in the aftermath of the operation. Through nanotechnology, tiny biosensors could be constructed which could take these factors into account, thus shortening the patient recovery period and saving hospitals money, reducing infection rates within the hospital, reducing the waiting lists for operation and allowing doctors to treat more patients in the same period of time. This review employs a thematic analysis of online series of academic papers focuses on the potentials of nanotechnology in surgery, especially in plastic surgery and addresses the possible future prospects of nanotechnology in this field.

Nanotechnologies in oil production

International Nuclear Information System (INIS)

Alieva, M.K; Kazimov, F.K.; Ismailov, E.

2010-01-01

Extraction of remaining, laboriously developed oil reserves at the last stage of development of deposits require drastically improved methods of oil recovery. From this point of view it is more expedient to apply high-tech nanotechnologies. Application of metal nanoparticles in solutions consisting of conventional reagents (deemulgators, SAA and etc.) allows to improve their rheology considerably to increase permaibility and washing of highly viscous components from the smallest pores. Thus, nanofluids influence layer system on atomic-molecular-ionic level which will lead to a complex synergetic effect from the application of nanotechnologies in oil and gas production.

Optimization of specimen preparation of thin cell section for AFM observation

Energy Technology Data Exchange (ETDEWEB)

Li Xinhui [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China); Ji Tong [Department of Oral and Maxillofacial Surgery, School of Stomatology, Affiliated Ninth People' s Hospital, Medical School, Shanghai Jiao Tong University, Shanghai 200011 (China); Hu Jun [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China); Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Sun Jielin [Nanobiology Laboratory, Bio-X Life Science Research Center, School of Life Science and Biotechnology, Shanghai Jiao Tong University, 800 Dongchuan Road, Minhang District, Shanghai 200240 (China)], E-mail: jlsun@sjtu.edu.cn

2008-08-15

High resolution imaging of intracellular structures of ultrathin cell section samples is critical to the performance of precise manipulation by atomic force microscopy (AFM). Here, we test the effect of multiple factors during section sample preparation on the quality of the AFM image. These factors include the embedding materials, the annealing process of the specimen block, section thickness, and section side. We found that neither the embedding materials nor the temperature and speed of the annealing process has any effect on AFM image resolution. However, the section thickness and section side significantly affect the surface topography and AFM image resolution. By systematically testing the image quality of both sides of cell sections over a wide range of thickness (40-1000 nm), we found that the best resolution was obtained with upper-side sections approximately 50-100 nm thick. With these samples, we could observe precise structure details of the cell, including its membrane, nucleoli, and other organelles. Similar results were obtained for other cell types, including Tca8113, C6, and ECV-304. In brief, by optimizing the condition of ultrathin cell section preparation, we were able to obtain high resolution intracellular AFM images, which provide an essential basis for further AFM manipulation.

A review of drug delivery systems based on nanotechnology and green chemistry: green nanomedicine

Directory of Open Access Journals (Sweden)

Jahangirian H

2017-04-01

Full Text Available Hossein Jahangirian,1 Ensieh Ghasemian Lemraski,2 Thomas J Webster,1 Roshanak Rafiee-Moghaddam,3 Yadollah Abdollahi4 1Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 2Department of Chemistry, Faculty of Science, Ilam University, Ilam, Iran; 3School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Selangor, 4Department of Electrical Engineering, Faculty of Engineering, University of Malaysia, Kuala Lumpur, Malaysia Abstract: This review discusses the impact of green and environmentally safe chemistry on the field of nanotechnology-driven drug delivery in a new field termed “green nanomedicine”. Studies have shown that among many examples of green nanotechnology-driven drug delivery systems, those receiving the greatest amount of attention include nanometal particles, polymers, and biological materials. Furthermore, green nanodrug delivery systems based on environmentally safe chemical reactions or using natural biomaterials (such as plant extracts and microorganisms are now producing innovative materials revolutionizing the field. In this review, the use of green chemistry design, synthesis, and application principles and eco-friendly synthesis techniques with low side effects are discussed. The review ends with a description of key future efforts that must ensue for this field to continue to grow. Keywords: green chemistry, cancer, drug delivery, nanoparticle

EDITORIAL: Multitasking in nanotechnology Multitasking in nanotechnology

Science.gov (United States)

Demming, Anna

2013-06-01

O nanowires generate a piezoelectric signal that acts as both the power source and the gas sensing information as a result of the different screening effects different gases present on the piezoelectric charges. As they explain 'Our results can provoke a possible new direction for the development of next-generation gas sensors and will further expand the scope of self-powered nanosystems'. Over 50 years ago C P Snow delivered and subsequently published a lecture entitled 'The Two Cultures and the Scientific Revolution'. In it he lamented a gaping fissure separating the sciences and the humanities to the ultimate detriment of civilization and progress. The increasingly specialized activities in academia may suggest that if anything the gulf separating the two cultures may yet be increasing. It may seem that not only do 'natural scientists' speak a different language from 'literary intellectuals' but that biologists speak a different language from physicists, and so on down the increasingly fine dichotomies of academic endeavour. One of the exciting accompaniments to the rise in nanotechnology research has been a certain amount of liberation from these academic segregations. The breadth of fascinating properties found in a single system beg a strongly multidisciplinary approach and has attracted conversations not only between different sectors within the sciences, but with art as well [12]. The resulting cross-fertilisation between disciplines has already yielded an awesome cornucopia of multitasking devices, and no doubt the best is yet to come. References [1] Xue X, Nie Y, He B, Xing L, Zhang Y and Wang Z L 2013 Surface free-carrier screening effect on the output of ZnO nanowire nanogenerator and its potential as self-powered active gas sensors Nanotechnology 24 225501 [2] Torchilin V P 2006 Multifunctional nanocarriers Adv. Drug Deliv. Rev. 58 1532-55 [3] Weissleder R, Lee A S, Khaw B A, Shen T and Brady T J 1992 Antimyosin-labeled monocrystalline iron oxide allows detection

NANOMATERIALS, NANOTECHNOLOGY: APPLICATIONS, CONSUMER PRODUCTS, AND BENEFITS

Science.gov (United States)

Nanotechnology is a platform technology that is finding more and more applications daily. Today over 600 consumer products are available globally that utilize nanomaterials. This chapter explores the use of nanomaterials and nanotechnology in three areas, namely Medicine, Environ...

Effect of Nanotechnology Instructions on Senior High School Students

Science.gov (United States)

Lu, Chow-Chin; Sung, Chia-Chi

2011-01-01

In this research, we cooperate with senior high school teachers to understand current nanotechnology model of senior high school nanotechnology curriculum in Taiwan. Then design senior high school nanotechnology (nano-tech) curriculum to teach 503 senior high school students. After teaching the nano-tech curriculum we use the "Nanotechnology…

Military Applications of Nanotechnology: Implications for Strategic Cooperation & Conflict

OpenAIRE

Center on Contemporary Conflict

2012-01-01

FY 2012-2013. Project Leads: Kosal, Margaret E. The report will advance critical thinking on the potential role and impact of nanotechnology on defense policy. It will view nanotechnology through the prism of international cooperation and competition, examining whether emerging nanotechnology will exacerbate or mitigate regional security challenges. NA

Numbers, scale and symbols: the public understanding of nanotechnology

Science.gov (United States)

Batt, Carl A.; Waldron, Anna M.; Broadwater, Natalie

2008-10-01

Nanotechnology will be an increasing part of the everyday lives of most people in the world. There is a general recognition that few people understand the implications of the technology, the technology itself or even the definition of the word. This lack of understanding stems from a lack of knowledge about science in general but more specifically difficulty in grasping the size scale and symbolism of nanotechnology. A potential key to informing the general public is establishing the ability to comprehend the scale of nanotechnology. Transitioning from the macro to the nanoscale seems to require an ability to comprehend scales of one-billion. Scaling is a skill not common in most individuals and tests of their ability to extrapolate size based upon scaling a common object demonstrates that most individuals cannot scale to the extent needed to make the transition to nanoscale. Symbolism is another important vehicle to providing the general public with a basis to understand the concepts of nanotechnology. With increasing age, individuals are able to draw representations of atomic scale objects, but these tend to be iconic and the different representations not easily translated. Ball and stick models are most recognized by the public, which provides an opportunity to present not only useful symbolism but also a reference point for the atomic scale.

Numbers, scale and symbols: the public understanding of nanotechnology

International Nuclear Information System (INIS)

Batt, Carl A.; Waldron, Anna M.; Broadwater, Natalie

2008-01-01

Nanotechnology will be an increasing part of the everyday lives of most people in the world. There is a general recognition that few people understand the implications of the technology, the technology itself or even the definition of the word. This lack of understanding stems from a lack of knowledge about science in general but more specifically difficulty in grasping the size scale and symbolism of nanotechnology. A potential key to informing the general public is establishing the ability to comprehend the scale of nanotechnology. Transitioning from the macro to the nanoscale seems to require an ability to comprehend scales of one-billion. Scaling is a skill not common in most individuals and tests of their ability to extrapolate size based upon scaling a common object demonstrates that most individuals cannot scale to the extent needed to make the transition to nanoscale. Symbolism is another important vehicle to providing the general public with a basis to understand the concepts of nanotechnology. With increasing age, individuals are able to draw representations of atomic scale objects, but these tend to be iconic and the different representations not easily translated. Ball and stick models are most recognized by the public, which provides an opportunity to present not only useful symbolism but also a reference point for the atomic scale.

Biomechanical Properties of Murine Meniscus Surface via AFM-based Nanoindentation

Science.gov (United States)

Li, Qing; Doyran, Basak; Gamer, Laura W.; Lu, X. Lucas; Qin, Ling; Ortiz, Christine; Grodzinsky, Alan J.; Rosen, Vicki; Han, Lin

2015-01-01

This study aimed to quantify the biomechanical properties of murine meniscus surface. Atomic force microscopy (AFM)-based nanoindentation was performed on the central region, proximal side of menisci from 6- to 24-week old male C57BL/6 mice using microspherical tips (Rtip ≈ 5 μm) in PBS. A unique, linear correlation between indentation depth, D, and response force, F, was found on menisci from all age groups. This non-Hertzian behavior is likely due to the dominance of tensile resistance by the collagen fibril bundles on meniscus surface that are mostly aligned along the circumferential direction observed on 12-week old menisci. The indentation resistance was calculated as both the effective stiffness, Sind = dF/dD, and the effective modulus, Eind, via the isotropic Hertz model. Values of Sind and Eind were found to depend on indentation rate, suggesting the existence of poro-viscoelasticity. These values do not significantly vary with anatomical sites, lateral versus medial compartments, or mouse age. In addition, Eind of meniscus surface (e.g., 6.1 ± 0.8 MPa for 12 weeks of age, mean ± SEM, n = 13) was found to be significantly higher than those of meniscus surfaces in other species, and of murine articular cartilage surface (1.4 ± 0.1 MPa, n = 6). In summary, these results provided the first direct mechanical knowledge of murine knee meniscus tissues. We expect this understanding to serve as a mechanics-based benchmark for further probing the developmental biology and osteoarthritis symptoms of meniscus in various murine models. PMID:25817332

Managing risk in nanotechnology topics in governance, assurance and transfer

CERN Document Server

McAlea, Eamonn; Mullins, Martin

2016-01-01

This book aims to address how nanotechnology risks are being addressed by scientists, particularly in the areas of human health and the environment and how these risks can be measured in financial terms for insurers and regulators. It provides a comprehensive overview of nanotechnology risk measurement and risk transfer methods, including a chapter outlining how Bayesian methods can be used. It also examines nanotechnology from a legal perspective, both current and potential future outcomes. The global market for nanotechnology products was valued at $22.9 billion in 2013 and increased to about $26 billion in 2014. This market is expected to reach about $64.2 billion by 2019, a compound annual growth rate (CAGR) of 19.8% from 2014 to 2019. Despite the increasing value of nanotechnologies and their widespread use, there is a significant gap between the enthusiasm of scientists and nanotechnology entrepreneurs working in the nanotechnology space and the insurance/regulatory sector. Scientists are scarcely aware...

EDITORIAL: Nanopores—the 'Holey Grail' in nanotechnology research Nanopores—the 'Holey Grail' in nanotechnology research

Science.gov (United States)

Demming, Anna

2012-06-01

'Negative space' may be as important in the development of nanomaterials as it is in creating works of art. The term refers to the space around and between objects, an important aspect in artistic composition. In nanotechnology, while nanoposts and nanowires have been assiduously studied and exploited for enhancing the performance of solar cells [1], real-time chemical sensors [2], UV emitters [3] and many other applications, nanopore structures have also yielded important advances in a wide range of fields. In this issue Melnikov, Leburton and Gracheva report on the electrostatic properties of nanopores in a layered semiconductor, and show how they allow a more accurate characterization of DNA than pores in other membranes [4]. Nanoporous materials have been applied to a diverse range of technological challenges. In recognition of its potential in high-efficiency solar cells, Prakasam and colleagues in the US reported the first ever synthesis of self-aligned nanoporous haematite [5]. Haematite is abundant, stable, non-toxic and has a band gap in the visible region and, as their work demonstrates, the photoresponse of nanoporous haematite is very promising for energy harvesting applications. Nanoporous aluminum oxide has also proved to be a particularly valuable material in applications ranging from liquid display panels to biosensor microchips. A collaboration of researchers in Taiwan demonstrated that porous aluminum oxide on an indium tin oxide surface could act as an alignment layer in liquid crystal display panels that have a transmittance of 60-80%, and switch from black to bright with a response time of 62.5 ms [6]. In Korea, Chung, Son and Min investigated the effect of nanostructural parameters of porous aluminum oxide on cell adhesion and proliferation for cell-based microchips [7]. While aluminum oxide without any modifications is not favourable for adherent cell culture, the proliferation of cells dramatically increased in porous aluminum oxide

Nanomechanical probing of soft matter through hydrophobic AFM tips fabricated by two-photon polymerization

International Nuclear Information System (INIS)

Suriano, Raffaella; De Marco, Carmela; Turri, Stefano; Zandrini, Tommaso; Osellame, Roberto; Bragheri, Francesca

2016-01-01

Atomic force microscopy (AFM) nanoindentation of soft materials is a powerful tool for probing mechanical properties of biomaterials. Though many results have been reported in this field over the last decade, adhesion forces between the tip and the sample hinder the elastic modulus measurement when hydrophilic soft samples are investigated. Here, two-photon polymerization (2PP) technology was used to fabricate hydrophobic perfluoropolyether-based AFM tips. The hydrophobic 2PP tips allowed us to overcome the limitations of commercial and functionalized tips as well as to successfully measure the elastic modulus of medically relevant soft materials in air. Our results obtained in the characterization of poly(dimethyl siloxane) and polyethylene glycol hydrogels showed lower adhesion forces over a larger measurement range when compared to measurements performed with commercial tips. The elastic moduli measured by means of hydrophobic 2PP AFM tips were also found to be comparable to those obtained using conventional techniques for macroscopic samples. We successfully showed that the hydrophobic AFM tips developed by this highly versatile technology enable the study of mechanical properties of soft matter, benefiting from reduced sample–tip interactions, and a custom-made shape and dimension of the tips. (paper)

Nano-technology and nano-toxicology

OpenAIRE

Maynard, Robert L.

2012-01-01

Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of ...

The effectiveness of a popular science promotion program on nanotechnology for elementary school students in I-Lan City

Science.gov (United States)

Lin, Show-Yu; Wu, Ming-Ta; Cho, Ya-I.; Chen, Hui-Huang

2015-01-01

Background:Nanotechnology education has become an urgent priority to nurture skilled human resources for the rapidly developing nanotechnology-related industries. The promotion of popular science education focusing on nanotechnology is an ideal approach to bridge the gaps in formal curricula, and to stimulate curiosity about and interest in nanotechnology among schoolchildren. Purpose:The objective of this study was to evaluate the effectiveness of the Nanotechnology-based Popular Science Education Promotion and Teaching (NPSEPT) program through camp activity that was implemented in elementary schools in I-Lan City, Taiwan. Program description:To create a competitive advantage, a human resources development program was implemented as one of the nanotechnology incubation projects in Taiwan and focused on developing an appropriately-skilled professional workforce as well as promoting popular science education. Sample:The volunteer research participants were 323 sixth grade students in four elementary schools in I-Lan City, Taiwan, who were evaluated at the beginning and the end of the nanotechnology-based popular science promotion camp activity. Design and methods:A research tool called the 'NPSEPT test' was designed specifically for this study and was approved by experts who evaluated its content and face validity. The questionnaire was divided into three aspects: 'Nanophenomena in the natural world'; 'Nanomaterials and their scaling effects'; and 'Definition, characteristics, and applications of nanotechnology.' The effectiveness of learning among the students was analyzed using descriptive statistics, a paired sample t-test, analysis of variance (ANOVA) and a post hoc comparison. Results:The results of the three-part 'NPSEPT test' revealed that NPSEPT significantly advanced nanotechnology learning performance and outcomes among students in the four participating elementary schools. Of the 15 questions included in the NPSEPT test, positive change for more than 30

High-speed AFM for Studying Dynamic Biomolecular Processes

Science.gov (United States)

Ando, Toshio

2008-03-01

Biological molecules show their vital activities only in aqueous solutions. It had been one of dreams in biological sciences to directly observe biological macromolecules (protein, DNA) at work under a physiological condition because such observation is straightforward to understanding their dynamic behaviors and functional mechanisms. Optical microscopy has no sufficient spatial resolution and electron microscopy is not applicable to in-liquid samples. Atomic force microscopy (AFM) can visualize molecules in liquids at high resolution but its imaging rate was too low to capture dynamic biological processes. This slow imaging rate is because AFM employs mechanical probes (cantilevers) and mechanical scanners to detect the sample height at each pixel. It is quite difficult to quickly move a mechanical device of macroscopic size with sub-nanometer accuracy without producing unwanted vibrations. It is also difficult to maintain the delicate contact between a probe tip and fragile samples. Two key techniques are required to realize high-speed AFM for biological research; fast feedback control to maintain a weak tip-sample interaction force and a technique to suppress mechanical vibrations of the scanner. Various efforts have been carried out in the past decade to materialize high-speed AFM. The current high-speed AFM can capture images on video at 30-60 frames/s for a scan range of 250nm and 100 scan lines, without significantly disturbing week biomolecular interaction. Our recent studies demonstrated that this new microscope can reveal biomolecular processes such as myosin V walking along actin tracks and association/dissociation dynamics of chaperonin GroEL-GroES that occurs in a negatively cooperative manner. The capacity of nanometer-scale visualization of dynamic processes in liquids will innovate on biological research. In addition, it will open a new way to study dynamic chemical/physical processes of various phenomena that occur at the liquid-solid interfaces.

Adhesion forces in AFM of redox responsive polymer grafts: Effects of tip hydrophilicity

NARCIS (Netherlands)

Feng, Xueling; Kieviet, B.D.; Song, Jing; Schön, Peter Manfred; Vancso, Gyula J.

2014-01-01

The adherence between silicon nitride AFM tips and redox-active poly(ferrocenylsilanes) (PFS) grafts ongold was investigated by electrochemical AFM force spectroscopy. Before the adhesion measurementssilicon nitride AFM probes were cleaned with organic solvents (acetone and ethanol) or piranha

AFM-based detection of glycocalyx degradation and endothelial stiffening in the db/db mouse model of diabetes.

Science.gov (United States)

Targosz-Korecka, Marta; Jaglarz, Magdalena; Malek-Zietek, Katarzyna E; Gregorius, Aleksandra; Zakrzewska, Agnieszka; Sitek, Barbara; Rajfur, Zenon; Chlopicki, Stefan; Szymonski, Marek

2017-11-21

Degradation of the glycocalyx and stiffening of endothelium are important pathophysiological components of endothelial dysfunction. However, to our knowledge, these events have not been investigated in tandem in experimental diabetes. Here, the mechanical properties of the glycocalyx and endothelium in ex vivo mouse aorta were determined simultaneously in indentation experiments with an atomic force microscope (AFM) for diabetic db/db and control db/+ mice at ages of 11-19 weeks. To analyze highly heterogeneous aorta samples, we developed a tailored classification procedure of indentation data based on a bi-layer brush model supplemented with Hertz model for quantification of nanomechanics of endothelial regions with and without the glycocalyx surface. In db/db mice, marked endothelial stiffening and reduced glycocalyx coverage were present already in 11-week-old mice and persisted in older animals. In contrast, reduction of the effective glycocalyx length was progressive and was most pronounced in 19-week-old db/db mice. The reduction of the glycocalyx length correlated with an increasing level of glycated haemoglobin and decreased endothelial NO production. In conclusion, AFM nanoindentation analysis revealed that stiffening of endothelial cells and diminished glycocalyx coverage occurred in early diabetes and were followed by the reduction of the glycocalyx length that correlated with diabetes progression.

Responsible nanotechnology development

Science.gov (United States)

Forloni, Gianluigi

2012-08-01

Nanotechnologies have an increasing relevance in our life, numerous products already on the market are associated with this new technology. Although the chemical constituents of nanomaterials are often well known, the properties at the nano level are completely different from the bulk materials. Independently from the specific application the knowledge in this field involves different type of scientific competence. The accountability of the nanomaterial research imply the parallel development of innovative methodological approaches to assess and manage the risks associated to the exposure for humans and environmental to the nanomaterials for their entire life-cycle: production, application, use and waste discharge. The vast numbers of applications and the enormous amount of variables influencing the characteristics of the nanomaterials make particularly difficult the elaboration of appropriate nanotoxicological protocols. According to the official declarations exist an awareness of the public institutions in charge of the regulatory system, about the environmental, health and safety implications of nanotechnology, but the scientific information is insufficient to support appropriate mandatory rules. Public research programmers must play an important role in providing greater incentives and encouragement for nanotechnologies that support sustainable development to avoid endangering humanity's well being in the long-term. The existing imbalance in funds allocated to nanotech research needs to be corrected so that impact assessment and minimization and not only application come high in the agenda. Research funding should consider as a priority the elimination of knowledge gaps instead of promoting technological application only. With the creation of a public register collecting nanomaterials and new applications it is possible, starting from the information available, initiate a sustainable route, allowing the gradual development of a rational and informed approach to

Micromechanical Characterization of Complex Polypropylene Morphologies by HarmoniX AFM

Directory of Open Access Journals (Sweden)

S. Liparoti

2017-01-01

Full Text Available This paper examines the capability of the HarmoniX Atomic Force Microscopy (AFM technique to draw accurate and reliable micromechanical characterization of complex polymer morphologies generally found in conventional thermoplastic polymers. To that purpose, injection molded polypropylene samples, containing representative morphologies, have been characterized by HarmoniX AFM. Mapping and distributions of mechanical properties of the samples surface are determined and analyzed. Effects of sample preparation and test conditions are also analyzed. Finally, the AFM determination of surface elastic moduli has been compared with that obtained by indentation tests, finding good agreement among the results.

Nanotechnology, Big things from a Tiny World: a Review

OpenAIRE

Debnath Bhattacharyya; Shashank Singh; Niraj Satnalika; Ankesh Khandelwal; Seung-Hwan Jeon

2009-01-01

The purpose of this paper is to look into the present aspects of “Nanotechnology”. This paper gives a brief description of what Nanotechnology is?? And its application in various fields viz. computing, medicine, food technology, Robotics, Solar cells etc. It also deals with the future perspectives of Nanotechnology, risks in advanced nanotechnology.

Nanotechnology applications in the forest products industry

Science.gov (United States)

Robert J. Moon; Charles R. Frihart; Theodore Wegner

2006-01-01

Nanotechnology is the study and engineering of matter at the dimensions of 1 to 100 nanometers, where the physical, chemical, or biological properties are fundamentally different from those of the bulk material. By expanding our understanding and control of matter at such levels, new avenues in product development can be opened. Nanoscale-based science has...

Outlining ethical issues in nanotechnologies.

Science.gov (United States)

Spagnolo, Antonio G; Daloiso, Viviana

2009-09-01

Nanotechnologies are an expression of the human ability to control and manipulate matter on a very small scale. Their use will enable an even and constant monitoring of human organisms, in a new and perhaps less invasive way. Debates at all levels--national, European and international--have pointed out the common difficulty of giving a complete, clear definition of nanotechnologies. This is primarily due to the variety of their components, to the fact that there is not just one technology but several. The most significant medical applications of nanotechnologies are in the diagnostic and the therapeutic fields, eg biosensors and molecular imaging, providing diagnosis and drug delivery with no invasive methods involved. Like any other emerging field, such technologies imply new possibilities for improving health but, on the other hand, they are still at an experimental stage and therefore should be implemented under rigorous safety testing before going on general release. For this purpose, the ethical, legal and social implications (ELSI) of nanotechnologies have been elaborated by study groups, in order to develop solutions before the results of the tests are diffused into medical practice. The aim of this paper is to define some of the ethical issues concerning biomedical applications and to evaluate whether there is a need for new or additional guidelines and regulations.

Nanotechnology

Science.gov (United States)

Chan-Remillard, S.; Kapustka, L.; Goudey, S.

Nanotechnology is a rapidly emerging field. There are currently over 500 consumer products available in the marketplace and the field of nanotechnology itself that will be worth over 1 trillion by 2012. However, with an increasing number of products emerging, there is also a consequent rise in ecological and human exposure. The risk and degree of exposure to nanoscale particles (NP) will vary depending on the form of the particle, for example, powder, liquid or encapsulated, when contact occurs. Although, general public exposure to NP is increasing due to the shear number of products available, the majority of human exposure still occurs in an occupational setting. Preliminary exposure studies demonstrate that NP may enter the body via the gastrointestinal, respiratory and integumentary systems and then translocate to other vital organs and systems (for example via the olfactory bulb). Historical data on ultrafine particles have shown a higher incidence of lung cancer and respiratory disorders associated with exposure. Due to these data and evidence emerging directly on NP, precautionary measures may be warranted to ensure worker safety. Regulatory agencies and manufacturers are beginning to consider standard practices that adequately protect workers from nanoscale particle exposure. The occupational hazards associated with exposure and the current safety recommendations will be discussed.

EDITORIAL: Nanotechnology in vivo Nanotechnology in vivo

Science.gov (United States)

Demming, Anna

2010-04-01

-imaging labels [4]. A surface hydroxyl group renders silicon quantum dots soluble in water and the photoluminescence can be made stable with oxygen-passivation. In addition, researchers in Japan have demonstrated how the initially modest yield in the preparation of silicon quantum dots can be improved to tens of milligrams per batch, thus further promoting their application in bio-imaging [5]. In the search for non-toxic quantum dots, researchers at the Amrita Centre for Nanoscience in India have prepared heavy metal-free quantum dot bio-probes based on single phase ZnS [6]. The quantum dots are selectively doped with metals, transition metals and halides to provide tuneable luminescence properties, and they are surface conjugated with folic acid for cancer targeting. The quantum dots were demonstrated to be water-soluble, non-toxic in normal and cancer cell lines, and have bright, tuneable luminescence. So far most of the quantum dots developed for bio-imaging have had excitation and emission wavelengths in the visible spectrum, which is highly absorbed by tissue. This limits imaging with these quantum dots to superficial tissues. This week, researchers in China and the US reported work developing functionalized dots for in vivo tumour vasculature in the infrared part of the spectrum [7]. In addition the quantum dots were functionalised with glycine-aspartic acid (RGD) peptides, which target the vasculature of almost all types of growing tumours, unlike antibody- or aptamer-mediated targeting strategies that are specific to a particular cancer type. In this issue, researchers in China and the US demonstrate a novel type of contrast agent for ultrasonic tumour imaging [8]. Contrast-enhanced ultrasonic tumour imaging extends the diagnostic and imaging capabilities of traditional techniques. The use of nanoparticles as ultrasound contrast agents exploits the presence of open pores in the range of 380 to 780 nm in tumour blood vessels, which enhance the permeability and retention

A Webometric Investigation of Visibility and Collaboration of Iranian Nanotechnology Websites

Directory of Open Access Journals (Sweden)

Faramarz Sohili

2007-07-01

Full Text Available The present investigation intends to review the extent of visibility, impact and collaboration of Iranian nanotechnology websites using webometric method of link analysis. The sample consists of all websites dealing with nanotechnology in Iran. Findings showed that these sites have low visibility, web impact factor and page count. Iranian Nanotechnology Initiative, Nano Ideas and Iranian Nanotechnology Association had the highest number of inlinks and therefore highest visibility, while Nanotechnology Department Website had the lowest visibility. Findings also indicated that Amir Kabir Technical University Nanotechnology Committee website, Iran Nanotechnology initiative and Nano Ideas websites had the highest web impact factor, while Kashan University Institute for Nano Science and Technology had the lowest web impact factor. It was further established that Iranian Nanotech websites collaborate within two clusters. A Multi-dimensional scale was used.

Nanotechnology platforms in Parkinson’s Disease

Directory of Open Access Journals (Sweden)

Rishi Rajat Adhikary

2015-09-01

Full Text Available Parkinson’s disease (PD remains a serious concern due to its effects on the quality of life of patients and its socioeconomic burden to society. Present day management of PD has limitations in both diagnosis and treatment. Nanotechnology may provide smart solutions to this problem. The present review highlights the recent advancements in the development of nanotechnology platforms for PD. The review focuses on the use of such platforms in diagnostics, treatments, deep brain stimulation, neurosurgery and other modalities of management and the role of nanotechnology in each of these fields. The review also sheds light on the translation of technologies from labs to clinics and the essential advantages as well as concerns that accompany the translation.

A Nanotechnology-based Strategy to Increase the Efficiency of Cancer Diagnosis and Therapy: Folate-conjugated Gold Nanoparticles.

Science.gov (United States)

Beik, Jaber; Khademi, Sara; Attaran, Neda; Sarkar, Saeed; Shakeri-Zadeh, Ali; Ghaznavi, Habib; Ghadiri, Hossein

2017-01-01

Gold nanoparticles (AuNPs), owing to their elegant physicochemical properties, have recently been introduced as promising theranostic nanoparticles. Folic acid is a necessary vitamin for cell proliferation. Accordingly, the surface functionalization of AuNP with folic acid may offer a great potential for the development of a strategy to increase the efficiency of cancer diagnosis and therapy based on the new nanotechnology. In this study, we have reviewed the recent progress made in the design and the biomedical application of various folate-conjugated gold nanoparticles (FAuNPs). We performed a structured search in bibliographic databases and made a comprehensive list of relevant papers. The main subjects considered in this review included (1) methods for the preparation of F-AuNPs, (2) applications of F-AuNPs in computed tomography (CT), and (3) the use of F-AuNPs in targeted cancer therapy. As many as 96 papers were selected for the review. Accordingly, we explained the noncovalent and the covalent methods of fabricating the various types of F-AuNPs. Particular applications of F-AuNP in cancer diagnosis using the CT scan modality were described. In addition, the applications of F-AuNPs in targeted radiation therapy, chemotherapy, and hyperthermia were elucidated in depth. In the hyperthermia section, we presented certain extra explanations on F-AuNP-based laser, radiofrequency, and ultrasoundbased hyperthermia methods. This review identifies the important roles of F-AuNPs in current cancer studies that are being undertaken worldwide. The findings of this review confirm that F-AuNP is a new theranostic agent, which has a great potential for simultaneous cancer therapy and diagnosis. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

The Grand Challenges of Nanotechnology

International Nuclear Information System (INIS)

Lane, Neal

2001-01-01

Amazing breakthroughs and advances continue to be made in nanoscale science and engineering and the rapidly emerging field of nanotechnology, including near-commercial applications in biomedicine, computing and environmental protection. The National Nanotechnology Initiative, begun by the Clinton Administration has placed nanoscale research on a new funding trajectory. But, many 'grand challenges' must be overcome, technical ones as well as those related to funding, science and technology workforce, and the need for stronger collaboration across discipline, organizations, government agencies and with other countries

Computational Nanotechnology Molecular Electronics, Materials and Machines

Science.gov (United States)

Srivastava, Deepak; Biegel, Bryan A. (Technical Monitor)

2002-01-01

This presentation covers research being performed on computational nanotechnology, carbon nanotubes and fullerenes at the NASA Ames Research Center. Topics cover include: nanomechanics of nanomaterials, nanotubes and composite materials, molecular electronics with nanotube junctions, kinky chemistry, and nanotechnology for solid-state quantum computers using fullerenes.

Nanotechnology and health: From boundary object to bodily intervention

Science.gov (United States)

Perry, Karen-Marie Elah

Nanotechnology is commonly understood to involve the manipulation of individual molecules and atoms. Increasingly, healthcare practices in British Columbia are articulated through the nanotechnological in relationship to the body. The hope for better treatment and diagnosis of disease is located in the specificity of nanotechnological applications -- the finely tuned targeting of cells and treatments geared towards individual molecular profiles. However, this same specificity also alarms regulators, activists and consumer groups in the potential for increased toxicity. Drawing from participant observation, ethnographic interviews, and theoretical orientations adopted by Susan Leigh Star and Jeffrey Bowker, this thesis explores three questions: 1) How can nanotechnology inhabit multiple contexts at once and have both local and shared meaning; 2) How can people who live in one community draw their meanings from people and objects situated there and communicate with those inhabiting another; and 3) What moral and political consequences attend each of these questions? Keywords: nanotechnology; medical anthropology; anthropology of the body; science studies; critical theory; feminist theory; ethnography; qualitative research; biomedicine; nanotoxicology; bionanotechnology; British Columbia; Canada; nanomedicine; medical nanotechnology.

Development of a Model for the Representation of Nanotechnology-Specific Terminology

Science.gov (United States)

Bailey, LeeAnn O.; Kennedy, Christopher H.; Fritts, Martin J.; Hartel, Francis W.

2006-01-01

Nanotechnology is an important, rapidly-evolving, multidisciplinary field [1]. The tremendous growth in this area necessitates the establishment of a common, open-source terminology to support the diverse biomedical applications of nanotechnology. Currently, the consensus process to define and categorize conceptual entities pertaining to nanotechnology is in a rudimentary stage. We have constructed a nanotechnology-specific conceptual hierarchy that can be utilized by end users to retrieve accurate, controlled terminology regarding emerging nanotechnology and corresponding clinical applications. PMID:17238469

STM, SECPM, AFM and Electrochemistry on Single Crystalline Surfaces

Directory of Open Access Journals (Sweden)

Ulrich Stimming

2010-08-01

Full Text Available Scanning probe microscopy (SPM techniques have had a great impact on research fields of surface science and nanotechnology during the last decades. They are used to investigate surfaces with scanning ranges between several 100 mm down to atomic resolution. Depending on experimental conditions, and the interaction forces between probe and sample, different SPM techniques allow mapping of different surface properties. In this work, scanning tunneling microscopy (STM in air and under electrochemical conditions (EC-STM, atomic force microscopy (AFM in air and scanning electrochemical potential microscopy (SECPM under electrochemical conditions, were used to study different single crystalline surfaces in electrochemistry. Especially SECPM offers potentially new insights into the solid-liquid interface by providing the possibility to image the potential distribution of the surface, with a resolution that is comparable to STM. In electrocatalysis, nanostructured catalysts supported on different electrode materials often show behavior different from their bulk electrodes. This was experimentally and theoretically shown for several combinations and recently on Pt on Au(111 towards fuel cell relevant reactions. For these investigations single crystals often provide accurate and well defined reference and support systems. We will show heteroepitaxially grown Ru, Ir and Rh single crystalline surface films and bulk Au single crystals with different orientations under electrochemical conditions. Image studies from all three different SPM methods will be presented and compared to electrochemical data obtained by cyclic voltammetry in acidic media. The quality of the single crystalline supports will be verified by the SPM images and the cyclic voltammograms. Furthermore, an outlook will be presented on how such supports can be used in electrocatalytic studies.

Nanotechnology applications for glioblastoma.

Science.gov (United States)

Nduom, Edjah K; Bouras, Alexandros; Kaluzova, Milota; Hadjipanayis, Costas G

2012-07-01

Glioblastoma remains one of the most difficult cancers to treat and represents the most common primary malignancy of the brain. Although conventional treatments have found modest success in reducing the initial tumor burden, infiltrating cancer cells beyond the main mass are responsible for tumor recurrence and ultimate patient demise. Targeting residual infiltrating cancer cells requires the development of new treatment strategies. The emerging field of cancer nanotechnology holds promise in the use of multifunctional nanoparticles for imaging and targeted therapy of glioblastoma. This article examines the current state of nanotechnology in the treatment of glioblastoma and directions of further study. Copyright © 2012 Elsevier Inc. All rights reserved.

Small-world network effects on innovation: evidences from nanotechnology patenting

Energy Technology Data Exchange (ETDEWEB)

Shi, Yuan [University of Maryland, Robert H. Smith School of Business (United States); Guan, JianCheng, E-mail: guanjianch@ucas.ac.cn [University of Chinese Academy of Sciences, School of Economics and Management (China)

2016-11-15

This paper explores the effects of collaboration network on innovation in nanotechnology. We extend the idea of small-world to the heterogeneous network positions of actors by capturing the variation of how closely a given actor is connected to others in the same network and how clustered its neighbors are. We test the effects of small-world network in the context of nanotechnology patenting in China. Empirical results reveal that small-worldness, or the co-existence of high clustering and low path length in the network, displays inverse U-shape relationships with future patent output of the individual inventors and the system. Interestingly, the inflection point of the nonlinear relationship is significantly higher at the individual level. Based on these findings, we suggest that researchers of nanotechnology maintain a balance between friends in close-knit inner circles and colleagues in distant areas in their collaboration decisions and that policymakers interested in furthering the field offer collaboration opportunities for researchers in distant locations and areas.

Small-world network effects on innovation: evidences from nanotechnology patenting

International Nuclear Information System (INIS)

Shi, Yuan; Guan, JianCheng

2016-01-01

This paper explores the effects of collaboration network on innovation in nanotechnology. We extend the idea of small-world to the heterogeneous network positions of actors by capturing the variation of how closely a given actor is connected to others in the same network and how clustered its neighbors are. We test the effects of small-world network in the context of nanotechnology patenting in China. Empirical results reveal that small-worldness, or the co-existence of high clustering and low path length in the network, displays inverse U-shape relationships with future patent output of the individual inventors and the system. Interestingly, the inflection point of the nonlinear relationship is significantly higher at the individual level. Based on these findings, we suggest that researchers of nanotechnology maintain a balance between friends in close-knit inner circles and colleagues in distant areas in their collaboration decisions and that policymakers interested in furthering the field offer collaboration opportunities for researchers in distant locations and areas.

Experiences in supporting the structured collection of cancer nanotechnology data using caNanoLab

Science.gov (United States)

Gaheen, Sharon; Lijowski, Michal; Heiskanen, Mervi; Klemm, Juli

2015-01-01

Summary The cancer Nanotechnology Laboratory (caNanoLab) data portal is an online nanomaterial database that allows users to submit and retrieve information on well-characterized nanomaterials, including composition, in vitro and in vivo experimental characterizations, experimental protocols, and related publications. Initiated in 2006, caNanoLab serves as an established resource with an infrastructure supporting the structured collection of nanotechnology data to address the needs of the cancer biomedical and nanotechnology communities. The portal contains over 1,000 curated nanomaterial data records that are publicly accessible for review, comparison, and re-use, with the ultimate goal of accelerating the translation of nanotechnology-based cancer therapeutics, diagnostics, and imaging agents to the clinic. In this paper, we will discuss challenges associated with developing a nanomaterial database and recognized needs for nanotechnology data curation and sharing in the biomedical research community. We will also describe the latest version of caNanoLab, caNanoLab 2.0, which includes enhancements and new features to improve usability such as personalized views of data and enhanced search and navigation. PMID:26425409

Value chain of nanotechnology: a comparative study of some major players

Energy Technology Data Exchange (ETDEWEB)

Wang Gangbo [Tsinghua University, China Institute for Science and Technology Policy (CISTP), School of Public Policy and Management (China); Guan Jiancheng, E-mail: guanjianch@buaa.edu.cn [Chinese Academy of Sciences, School of Management, Graduate University (China)

2012-02-15

The article provides a general overview for the landscapes of national nanotechnology development from 1991 to 2010. More than 230,000 unique patents are identified based on a composite search strategy in the Derwent innovation index database. According to the concordance between patent classification and industry technology, some main application areas are identified to compare the positions and specializations among the leading countries. By extracting the content of the 'use' subfield in the abstracts and harvesting the keywords representing characteristics of life cycle, nanotechnology patents are grouped into four categories: nanomaterials, nanointermediates, nano-enabled products, and nanotools, which can be seen as four stages of nanotechnology's value chain. These analyses enable us to identify the distributions of value chain and prolific research institutions among the leading countries. It is found that China is productive in nanomaterials and nanointermediates, rather than nano-enabled products and nanotools, which could be mainly explained by the fact that Chinese academia makes a main contribution to nanotechnology patenting. However, there is a big gap between university patenting and market demands, leading to a low rate of technology transfer or licensing.