TIG3 tumor suppressor-dependent organelle redistribution and apoptosis in skin cancer cells.

Directory of Open Access Journals (Sweden)

Tiffany M Scharadin

Full Text Available TIG3 is a tumor suppressor protein that limits keratinocyte survival during normal differentiation. It is also important in cancer, as TIG3 level is reduced in tumors and in skin cancer cell lines, suggesting that loss of expression may be required for cancer cell survival. An important goal is identifying how TIG3 limits cell survival. In the present study we show that TIG3 expression in epidermal squamous cell carcinoma SCC-13 cells reduces cell proliferation and promotes morphological and biochemical apoptosis. To identify the mechanism that drives these changes, we demonstrate that TIG3 localizes near the centrosome and that pericentrosomal accumulation of TIG3 alters microtubule and microfilament organization and organelle distribution. Organelle accumulation at the centrosome is a hallmark of apoptosis and we demonstrate that TIG3 promotes pericentrosomal organelle accumulation. These changes are associated with reduced cyclin D1, cyclin E and cyclin A, and increased p21 level. In addition, Bax level is increased and Bcl-XL level is reduced, and cleavage of procaspase 3, procaspase 9 and PARP is enhanced. We propose that pericentrosomal localization of TIG3 is a key event that results in microtubule and microfilament redistribution and pericentrosomal organelle clustering and that leads to cancer cell apoptosis.

Investigation of heat transfer and fluid flow in activating TIG welding by numerical modeling

International Nuclear Information System (INIS)

Wang, Xinxin; Huang, Jiankang; Huang, Yong; Fan, Ding; Guo, Yanning

2017-01-01

Highlights: • The heat input to the anode and subsequent thermal efficiency is almost equal for TIG and A-TIG welding. • Dominant effect heat convection and reversion of molten metal flow in weld pool causes significant increase in weld penetration. - Abstract: Heat transfer and fluid flow of arc plasma and weld pool in tungsten inert gas (TIG) welding and activated flux tungsten inert gas (A-TIG) welding of SUS 304 stainless steel are investigated comparatively though a 3D unified model. The model differs from the previous ones in that it considers the arc length more realistic for welding production. Tungsten electrode, anode (work piece) and arc plasma are all included. The effects of buoyance, plasma drag force, Lorentz force and Marangoni force on the weld pool flow are taken into account. By solving the conservation equations of mass, momentum, energy as well as Maxwell equations, the distributions of temperature and velocity of arc plasma and weld pool are obtained for TIG and A-TIG welding. The heat flux, current density and shear stress at the weld pool are presented. Dimensionless numbers are employed to compare the relative importance of the driven forces and that of convection and conduction in heat transfer of the weld pool. It is demonstrated that there is no significant difference in the heat flux at the weld pool, and total heat input to the anode and thermal efficiency is almost equal for TIG and A-TIG welding. The current density and the heat flux at the weld pool are more concentrated in more realistic welding condition. As a result, both of the temperature of the weld pool for TIG welding and A-TIG welding increases, while the latter is more significant. Marangoni force ranges from zero to 100 Pa and dominant the weld pool flow. Compared with the conventional TIG welding, the reversion of the Marangoni force results in inward flow and thus causes inward heat convection in weld pool of A-TIG welding. Heat convection was the main mechanism of

[Stress-corrosion test of TIG welded CP-Ti].

Science.gov (United States)

Li, H; Wang, Y; Zhou, Z; Meng, X; Liang, Q; Zhang, X; Zhao, Y

2000-12-01

In this study TIG (Tungsten Inert Gas) welded CP-Ti were subjected to stress-corrosion test under 261 MPa in artificial saliva of 37 degrees C for 3 months. No significant difference was noted on mechanical test (P > 0.05). No color-changed and no micro-crack on the sample's surface yet. These results indicate that TIG welded CP-Ti offers excellent resistance to stress corrosion.

Study of the Performance of Stainless Steel A-TIG Welds

Science.gov (United States)

Shyu, S. W.; Huang, H. Y.; Tseng, K. H.; Chou, C. P.

2008-04-01

The purpose of the present work was to investigate the effect of oxide fluxes on weld morphology, arc voltage, mechanical properties, angular distortion and hot cracking susceptibility obtained with TIG welding, which applied to the welding of 5 mm thick austenitic stainless steel plates. A novel variant of the autogenous TIG welding process, oxide powders (Al2O3, Cr2O3, TiO2, SiO2 and CaO) was applied on a type 304 stainless steel through a thin layer of the flux to produce a bead on plate welds. The experimental results indicated that the increase in the penetration is significant with the use of Cr2O3, TiO2, and SiO2. A-TIG welding can increase the weld depth to bead-width ratio, and tends to reduce the angular distortion of the weldment. It was also found that A-TIG welding can increase the retained delta-ferrite content of stainless steel 304 welds and, in consequence, the hot-cracking susceptibility of as-welded is reduced. Physically constricting the plasma column and reducing the anode spot are the possible mechanism for the effect of certain flux on A-TIG penetration.

TIG (Tungsten Inert Gas) welding

International Nuclear Information System (INIS)

Anon.

2010-01-01

After having recalled the Tungsten Inert Gas process principle and the different alternative TIG processes, the author explains the advantages and limits of this process. The applications and recent developments are given. (O.M.)

TIG- en plasmalassen : VM 81

NARCIS (Netherlands)

W.G. Essers

2010-01-01

Voor u ligt de voorlichtingspublicatie "TIG- en plasmalassen". Deze voorlichtingspublicatie is bedoeld voor allen die te maken hebben of te maken krijgen met toepassing van de betreffende verbindingstechnieken. Daarbij moet worden gedacht aan bijvoorbeeld constructeurs,

TIG Dressing Effects on Weld Pores and Pore Cracking of Titanium Weldments

Directory of Open Access Journals (Sweden)

Hui-Jun Yi

2016-10-01

Full Text Available Weld pores redistribution, the effectiveness of using tungsten inert gas (TIG dressing to remove weld pores, and changes in the mechanical properties due to the TIG dressing of Ti-3Al-2.5V weldments were studied. Moreover, weld cracks due to pores were investigated. The results show that weld pores less than 300 μm in size are redistributed or removed via remelting due to TIG dressing. Regardless of the temperature condition, TIG dressing welding showed ductility, and there was a loss of 7% tensile strength of the weldments. Additionally, it was considered that porosity redistribution by TIG dressing was due to fluid flow during the remelting of the weld pool. Weld cracks in titanium weldment create branch cracks around pores that propagate via the intragranular fracture, and oxygen is dispersed around the pores. It is suggested that the pore locations around the LBZ (local brittle zone and stress concentration due to the pores have significant effects on crack initiation and propagation.

Corrosion Resistance and Mechanical Properties of TIG and A-TIG Welded Joints of Lean Duplex Stainless Steel S82441 / 1.4662

Directory of Open Access Journals (Sweden)

Brytan Z.

2016-06-01

Full Text Available This paper presents results of pitting corrosion resistance of TIG (autogenous and with filler metal and A-TIG welded lean duplex stainless steel S82441/1.4662 evaluated according to ASTM G48 method, where autogenous TIG welding process was applied using different amounts of heat input and shielding gases like pure Ar and Ar+N2 and Ar+He mixtures. The results of pitting corrosion resistance of the welded joints of lean duplex stainless steel S82441 were studied in as weld conditions and after different mechanical surface finish treatments. The results of the critical pitting temperature (CPT determined according to ASTM G48 at temperatures of 15, 25 and 35°C were presented. Three different surface treatment after welding were applied: etching, milling, brushing + etching. The influence of post weld surface treatment was studied in respect to the pitting corrosion resistance, basing on CPT temperature.

Research on the Effects of Technical Parameters on the Molding of the Weld by A-TIG Welding

OpenAIRE

Shi, Kai; Pan, Wu

2012-01-01

The effects of welding parameters on the molding of weld by A-TIG welding of a 4mm thickness mild steel plate is studied in the present paper. The results obtained show that: as welding current increases A-TIG welding penetration gets deeper than TIG welding; size and shape of HAZ has remarkable change; A-TIG welding has the narrower weld pool width than TIG welding.

Study on Microstructure and Mechanical Properties of 304 Stainless Steel Joints by Tig-Mig Hybrid Welding

Science.gov (United States)

Ogundimu, Emmanuel O.; Akinlabi, Esther T.; Erinosho, Mutiu F.

Stainless steel is a family of Fe-based alloys having excellent resistance to corrosion and as such has been used imperatively for kitchen utensils, transportation, building constructions and much more. This paper presents the work conducted on the material characterizations of a tungsten inert gas (TIG)-metal inert gas (MIG) hybrid welded joint of type 304 austenitic stainless steel. The welding processes were conducted in three phases. The phases of welding employed are MIG welding using a current of 170A, TIG welding using a current of 190A, and a hybrid TIG-MIG welding with currents of 190/170A, respectively. The MIG, TIG, and hybrid TIG-MIG weldments were characterized with incomplete penetration, full penetration and excess penetration of weld. Intergranular austenite was created toward transition and heat affected zones. The thickness of the delta ferrite (δ-Fe) formed in the microstructures of the TIG weld is more than the thickness emerged in the microstructures of MIG and hybrid TIG-MIG welds. A TIG-MIG hybrid weld of specimen welded at the currents of 190/170A has the highest ultimate tensile strength value and percentage elongation of 397.72MPa and 35.7%. The TIG-MIG hybrid welding can be recommended for high-tech industrial applications such as nuclear, aircraft, food processing, and automobile industry.

Hybrid laser-TIG welding, laser beam welding and gas tungsten arc welding of AZ31B magnesium alloy

International Nuclear Information System (INIS)

Liu Liming; Wang Jifeng; Song Gang

2004-01-01

Welding of AZ31B magnesium alloy was carried out using hybrid laser-TIG (LATIG) welding, laser beam welding (LBW) and gas tungsten arc (TIG) welding. The weldability and microstructure of magnesium AZ31B alloy welded using LATIG, LBW and TIG were investigated by OM and EMPA. The experimental results showed that the welding speed of LATIG was higher than that of TIG, which was caught up with LBW. Besides, the penetration of LATIG doubles that of TIG, and was four times that of LBW. In addition, arc stability was improved in hybrid of laser-TIG welding compared with using the TIG welding alone, especially at high welding speed and under low TIG current. It was found that the heat affect zone of joint was only observed in TIG welding, and the size of grains in it was evidently coarse. In fusion zone, the equiaxed grains exist, whose size was the smallest welded by LBW, and was the largest by TIG welding. It was also found that Mg concentration of the fusion zone was lower than that of the base one by EPMA in three welding processes

A new human male diploid cell strain, TIG-7: its age-related changes and comparison with a matched female TIG-1 cell strain.

Science.gov (United States)

Yamamoto, K; Kaji, K; Kondo, H; Matsuo, M; Shibata, Y; Tasaki, Y; Utakoji, T; Ooka, H

1991-01-01

A new human diploid cell strain, TIG-7, which has the male karyotype, was established and characterized. Isozyme and histocompatibility typing of the cell strain was performed. The average in vitro life span of the cells is 73 population doublings. Changes in cell volume, doubling time, saturation density, the efficiency of cell attachment, plating efficiency, and relative DNA content were examined during in vitro cellular aging. Hydrocortisone slightly prolongs the life span of the cell strain when the hormone is administered to the cultures during middle passages. The age-related changes in the parameters of TIG-7 are not appreciably different from those of the previously established TIG-1 cell strain. These results show that this cell strain is useful for research on cellular aging; further profit is anticipated from research using a combination of these two sexually different cell strains.

Estudio comparativo de la productividad y calidad obtenidas en la soldadura de tubos de calidad T9 empleados en el sector petroquímico, mediante los procesos TIG, HW-TIG y PAW Comparative study of productivity and quality obtained in tube welding quality T9 employees in the petrochemical industry, through TIG, HW-TIG and PAW processes

Directory of Open Access Journals (Sweden)

César García González

2012-09-01

Full Text Available Tradicionalmente, la fabricación soldada de tuberías de acero Cr-Mo empleadas en serpentines de hornos para la industria petroquímica se ha venido realizando de forma masiva mediante procesos de baja productividad, principalmente TIG para la pasada de raíz y SMAW para las pasadas de relleno, ambos manuales. En este estudio se muestran los resultados de la investigación realizada por el Centro Tecnológico AIMEN, en relación al empleo de tecnologías de alto rendimiento, concretamente TIG, HW-TIG y PAW robotizadas, aplicadas a los mismos materiales y productos. De este modo se calculan y comparan cuatro índices de productividad: Tiempo de Soldadura, Tasa de Deposición, Material Depositado y Volumen de Gas Consumido. El objetivo del estudio es contribuir a la reducción de los tiempos de producción, de los costes de fabricación, y a la mejora de la calidad del producto.Traditionally, the manufacture of welded Cr-Mo steel pipes used in furnace coils for petrochemical industry has been carried out on a massive scale by low productivity processes, mainly TIG for root pass and SMAW for layers of filling run, both of them manuals. This study presents the results of a research, conducted by AIMEN Technology Centre, related to the use of high performance technologies, specifically robotic processes such as TIG, TIG-HW and PAW, applied to the same materials and products. Thus, four productivity ratios have been calculated and compared: welding time, deposition rate, deposited material and volume of consumed gas. The aim of the study is to contribute to the reduction of the production time, manufacturing costs and to the improvement of the product quality.

Numerical analysis of the heat source characteristics of a two-electrode TIG arc

International Nuclear Information System (INIS)

Ogino, Y; Hirata, Y; Nomura, K

2011-01-01

Various kinds of multi-electrode welding processes are used to ensure high productivity in industrial fields such as shipbuilding, automotive manufacturing and pipe fabrication. However, it is difficult to obtain the optimum welding conditions for a specific product, because there are many operating parameters, and because welding phenomena are very complicated. In the present research, the heat source characteristics of a two-electrode TIG arc were numerically investigated using a 3D arc plasma model with a focus on the distance between the two electrodes. The arc plasma shape changed significantly, depending on the electrode spacing. The heat source characteristics, such as the heat input density and the arc pressure distribution, changed significantly when the electrode separation was varied. The maximum arc pressure of the two-electrode TIG arc was much lower than that of a single-electrode TIG. However, the total heat input of the two-electrode TIG arc was nearly constant and was independent of the electrode spacing. These heat source characteristics of the two-electrode TIG arc are useful for controlling the heat input distribution at a low arc pressure. Therefore, these results indicate the possibility of a heat source based on a two-electrode TIG arc that is capable of high heat input at low pressures.

Microprobe investigation of brittle segregates in aluminum MIG and TIG welds

Science.gov (United States)

Larssen, P. A.; Miller, E. L.

1968-01-01

Quantitative microprobe analysis of segregated particles in aluminum MIG /Metal Inert Gas/ and TIG /Tungsten Inert Gas/ welds indicated that there were about ten different kinds of particles, corresponding to ten different intermetallic compounds. Differences between MIG and TIG welds related to the individual cooling rates of these welds.

TIG welding of aluminium foams. Analysis of foaming operating parameters; Soldadura TIG de espumas de aluminio. Analisis de los parametros operacionales de espumado

Energy Technology Data Exchange (ETDEWEB)

Portoles, A.; Berenguer, O.; Onoro, J.; Ranninger, C.

2011-07-01

In this work the influence of main parameters that take part during TIG welding process are analyzed. Some of these parameters belong to the welding process, as for example the welding speed, intensity and voltage while others are from the material and tooling features, as for example foaming material and tooling design. The result of this work shows a strong dependence on these parameters of the TIG welding process for metallic foams. (Author) 16 refs.

TIG of Reduced Activation Ferrite/Martensitic Steel for the Korean ITER-TBM

International Nuclear Information System (INIS)

Ku, Duck Young; Ahn, Mu Young; Yu, In Keun; Cho, Seun Gyon; Oh, Seung Jin

2010-01-01

Test Blanket Modules (TBM) will be tested in ITER to verify the capability of tritium breeding and recovery and the extraction of thermal energy suitable for the production of electricity. A Helium Cooled Solid Breeder (HCSB) TBM has been developed in Korea to accomplish these goals. Reduced Activation Ferritic/Martensitic (RAFM) steel has been chosen as the primary candidate structural material for Korean TBM. Due to the complexity of the First wall (FW) and Side wall (SW), it is necessary to develop various joining technologies, such as Hot Isostatic Pressing (HIP), Electron Beam Welding (EBW) and Tungsten Inert Gas (TIG) welding, for the successful fabrication of TBM. In this study, the mechanical properties of TIG welded RAFM steel were investigated. Various mechanical tests of TIG-welded RAFM steel were performed to obtain the optimized TIG welding process for RAFM steel

TIG of Reduced Activation Ferrite/Martensitic Steel for the Korean ITER-TBM

Energy Technology Data Exchange (ETDEWEB)

Ku, Duck Young; Ahn, Mu Young; Yu, In Keun; Cho, Seun Gyon [ITER Korea, National Fusion Research Institute, Daejeon (Korea, Republic of); Oh, Seung Jin [KHNP, Daejeon (Korea, Republic of)

2010-10-15

Test Blanket Modules (TBM) will be tested in ITER to verify the capability of tritium breeding and recovery and the extraction of thermal energy suitable for the production of electricity. A Helium Cooled Solid Breeder (HCSB) TBM has been developed in Korea to accomplish these goals. Reduced Activation Ferritic/Martensitic (RAFM) steel has been chosen as the primary candidate structural material for Korean TBM. Due to the complexity of the First wall (FW) and Side wall (SW), it is necessary to develop various joining technologies, such as Hot Isostatic Pressing (HIP), Electron Beam Welding (EBW) and Tungsten Inert Gas (TIG) welding, for the successful fabrication of TBM. In this study, the mechanical properties of TIG welded RAFM steel were investigated. Various mechanical tests of TIG-welded RAFM steel were performed to obtain the optimized TIG welding process for RAFM steel

Tube welding by the pulsed tig method

International Nuclear Information System (INIS)

Dick, N.T.

1973-01-01

During the construction of the helical wound boiler pods for the AGR stations at Hartlepool and Heysham, automatic TIG-welding techniques were used. In some cases limited access excluded the use of wire feed techniques and autogenous techniques had to be used. To resolve the problem of excessive concavity which occurred when using constant current autogenous techniques on 14.5 mm OD mild steel tubes of 1.8 mm thickness, pulsed-TIG welding was applied. By modifying the trailing edge of the pulse to produce a crater fill with each pulse, susceptibility to porosity and solidification cracking was reduced. The incorporation of digital counter permitted pulse duration, background duration, and electrode indexing distance to be monitored. (U.K.)

Hot wire TIG temper bead welding for nuclear repairs

International Nuclear Information System (INIS)

Lambert, J.A.; Gilston, P.F.

1989-08-01

A preliminary assessment has been carried out to determine the suitability of the hot wire tungsten inert gas (TIG) welding process for the repair of thick section, ferritic steel nuclear pressure vessels. The objective has been to identify a hot wire TIG temper bead procedure, suitable for repairs without post weld heat treatment. This procedure involves depositing two weld layers with carefully selected welding parameters such that overlapping thermal cycles produce a refined and tempered heat affected zone, HAZ, microstructure. (author)

De las TIG a las TAG en la formación docente

OpenAIRE

López Fernández, José Antonio

2016-01-01

Aportación a la mesa redonda: “LA FORMACIÓN EN TIG EN LOS NUEVOS PLANES DE GRADOS Y MÁSTERES”, desarrollada en el marco del XVII Congreso Nacional de TIG. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.

Single Center Retrospective Analysis of Conventional and Radial TIG Catheters for Transradial Diagnostic Coronary Angiography.

Science.gov (United States)

Vorpahl, Marc; Koehler, Till; Foerst, Jason; Panagiotopoulos, Spyridon; Schleiting, Heinrich; Koss, Klaus; Ziegler, Gunda; Brinkmann, Hilmar; Seyfarth, Melchior; Tiroch, Klaus

2015-01-01

Current guidelines favor the radial approach for coronary angiography. Therefore, specialty radial diagnostic catheters were designed to engage both coronary arteries with a single device. However, it is unclear if single catheters are superior to conventional catheters. A retrospective analysis was performed of consecutive right radial coronary angiographies to determine catheter use, fluoroscopy time, radiation dosage, and consumption of contrast. Procedures were performed with a single TIG catheter or conventional catheters (CONV). Procedures with coronary artery bypass grafts or ventricular angiographies were excluded. 273 transradial procedures were performed successfully. 95 procedures were performed with CONV and 178 procedures with a TIG. Crossover to additional catheters was higher in TIG (15.2%) compared to CONV (5.3%, p = 0.02). Fluoroscopy time was comparable between CONV and TIG, without crossover (2.2 ± 1.2 min versus 2.3 ± 1.2 min; n.s.), however, greater in the case of crossover for CONV (5.8 ± 0.7) and TIG (7.6 ± 3.0; p = 0.0001). Radiation dosage was similar in CONV and the TIG, without crossover (1419 ± 1075, cGy∗cm(2) versus 1690 ± 1138; n.s.), however, greater for CONV (2374 ± 620) and TIG (3733 ± 2281, p = 0.05) with crossover. Overall, the amount of contrast was greater in TIG (56 ± 13 mL) versus CONV (48 ± 3 mL; p = 0.0003). CONV femoral catheters may be the primary choice for radial approach.

Development of TIG Welding System for a Nuclear Fuel Test Rig

Energy Technology Data Exchange (ETDEWEB)

Joung, Changyoung; Ahn, Sungho; Hong, Jintae; Kim, Kahye [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

The welding process is one of the most important among the instrumentation processes of the nuclear fuel test rig and rods. To manufacture the nuclear fuel test rig, a precision welding system needs to be fabricated to develop various welding technologies of the fuel test rig and rods jointing the various sensors and end caps on a fuel cladding tube, which is charged with fuel pellets and component parts. Thus, we designed and fabricated the precision welding system consisting of an orbital TIG welder, a low-pressure chamber, and a high-pressure chamber. Using this system, the performance tests were performed with the round and seal spot welds for each welding condition. This paper describes not only the contents for the fabrication of precision TIG welding system but also some results from weld tests using the low-pressure and high-pressure chambers to verify the performance of this system. The TIG welding system was developed to manufacture the nuclear fuel test rig and rods. It has been configured to be able to weld the nuclear fuel test rigs and rods by applying the TIG welder using a low-pressure chamber and a high-pressure chamber. The performance tests using this system were performed with the round and seal spot welds for the welding conditions. The soundness of the orbital TIG welding system was confirmed through performance tests in the low-pressure and high-pressure chambers.

Development of TIG Welding System for a Nuclear Fuel Test Rig

International Nuclear Information System (INIS)

Joung, Changyoung; Ahn, Sungho; Hong, Jintae; Kim, Kahye

2013-01-01

The welding process is one of the most important among the instrumentation processes of the nuclear fuel test rig and rods. To manufacture the nuclear fuel test rig, a precision welding system needs to be fabricated to develop various welding technologies of the fuel test rig and rods jointing the various sensors and end caps on a fuel cladding tube, which is charged with fuel pellets and component parts. Thus, we designed and fabricated the precision welding system consisting of an orbital TIG welder, a low-pressure chamber, and a high-pressure chamber. Using this system, the performance tests were performed with the round and seal spot welds for each welding condition. This paper describes not only the contents for the fabrication of precision TIG welding system but also some results from weld tests using the low-pressure and high-pressure chambers to verify the performance of this system. The TIG welding system was developed to manufacture the nuclear fuel test rig and rods. It has been configured to be able to weld the nuclear fuel test rigs and rods by applying the TIG welder using a low-pressure chamber and a high-pressure chamber. The performance tests using this system were performed with the round and seal spot welds for the welding conditions. The soundness of the orbital TIG welding system was confirmed through performance tests in the low-pressure and high-pressure chambers

Effects of Flux Precoating and Process Parameter on Welding Performance of Inconel 718 Alloy TIG Welds

Science.gov (United States)

Lin, Hsuan-Liang; Wu, Tong-Min; Cheng, Ching-Min

2014-01-01

The purpose of this study is to investigate the effect of activating flux on the depth-to-width ratio (DWR) and hot cracking susceptibility of Inconel 718 alloy tungsten inert gas (TIG) welds. The Taguchi method is employed to investigate the welding parameters that affect the DWR of weld bead and to achieve optimal conditions in the TIG welds that are coated with activating flux in TIG (A-TIG) process. There are eight single-component fluxes used in the initial experiment to evaluate the penetration capability of A-TIG welds. The experimental results show that the Inconel 718 alloy welds precoated with 50% SiO2 and 50% MoO3 flux were provided with better welding performance such as DWR and hot cracking susceptibility. The experimental procedure of TIG welding process using mixed-component flux and optimal conditions not only produces a significant increase in DWR of weld bead, but also decreases the hot cracking susceptibility of Inconel 718 alloy welds.

Optical Arc-Length Sensor For TIG Welding

Science.gov (United States)

Smith, Matthew A.

1990-01-01

Proposed subsystem of tungsten/inert-gas (TIG) welding system measures length of welding arc optically. Viewed by video camera, in one of three alternative optical configurations. Length of arc measured instead of inferred from voltage.

La formación en TIG en los nuevos planes de grados y másteres: la enseñanza de las TIG en España y en Europa.

OpenAIRE

Gómez Delgado, Montserrat

2016-01-01

Aportación a la mesa redonda "Mesa redonda: La formación en TIG en los nuevos planes de grados y másteres", desarrollada en el marco del XVII Congreso Nacional TIG. Universidad de Málaga y Asociación de Geógrafos Españoles.

Microstructure and mechanical properties in TIG welding of CLAM steel

International Nuclear Information System (INIS)

Zhu Qiang; Lei Yucheng; Chen Xizhang; Ren Wenjie; Ju Xin; Ye Yimin

2011-01-01

Tungsten insert gas (TIG) welding on China low activation martensitic (CLAM) steel under identical conditions was performed. Microhardness test, tensile test, Charpy impact test and microstructure measurements were carried out on TIG welded joints after post weld heat-treatment. Hardening at WM and softening in HAZ is detected in the TIG weld joint. Microhardness in WM decreased when the temperature of PWHT increased. The ultimate tensile stress of weld metal is higher than that of HAZ and BM. Absorbed energy increased with PWHT temperature rising, until PWHT was done at 760 deg. C/30 min, the specimen ductile fractured in local area. The microstructure of the weld metal for every specimen was found to be tempered martensite with a little of delta ferrite. M 23 C 6 particles are the predominant type of carbides. Oxide precipitate phases appeared in WM, which are the primary crack initiation sites and it is critically important minimize their formation.

A simplified model for TIG-dressing numerical simulation

Science.gov (United States)

Ferro, P.; Berto, F.; James, M. N.

2017-04-01

Irrespective of the mechanical properties of the alloy to be welded, the fatigue strength of welded joints is primarily controlled by the stress concentration associated with the weld toe or weld root. In order to reduce the effects of such notch defects in welds, which are influenced by tensile properties of the alloy, post-weld improvement techniques have been developed. The two most commonly used techniques are weld toe grinding and TIG dressing, which are intended to both remove toe defects such as non-metallic intrusions and to re-profile the weld toe region to give a lower stress concentration. In the case of TIG dressing the weld toe is re-melted to provide a smoother transition between the plate and the weld crown and to beneficially modify the residual stress redistribution. Assessing the changes to weld stress state arising from TIG-dressing is most easily accomplished through a complex numerical simulation that requires coupled thermo-fluid dynamics and solid mechanics. However, this can be expensive in terms of computational cost and time needed to reach a solution. The present paper therefore proposes a simplified numerical model that overcomes such drawbacks and which simulates the remelted toe region by means of the activation and deactivation of elements in the numerical model.

Investigation of TIG welding characteristics with a dual cooled rod for the fuel irradiation test

International Nuclear Information System (INIS)

Kim, Soo Sung; Kim, Hyung Kyu

2008-01-01

To establish the fabrication process, and for satisfying the requirements of the irradiation test, an TIG(Tungsten Inert Gas) welding machine for the dual cooled rods specimens was developed, and the preliminary welding experiments were performed to optimize the welding process conditions. Cladding tubes of 15.9 and 9 mm for the outer and inner diameters, respectively with a 0.57 mm thickness and end caps were used for the specimens. This paper describes the experimental results of the TIG welds and the micrograph examinations of the TIG welded specimens corresponding to various welding conditions for the dual cooled fuel irradiation test. The investigations revealed that the present TIG process satisfied the requirements for the fuel irradiation test in the HANARO research reactor

Studies on A-TIG welding of Low Activation Ferritic/Martensitic (LAFM) steel

International Nuclear Information System (INIS)

Vasantharaja, P.; Vasudevan, M.

2012-01-01

Low Activation Ferritic–Martensitic steels (LAFM) are chosen as the candidate material for structural components in fusion reactors. The structural components are generally fabricated by welding processes. Activated Tungsten Inert Gas (A-TIG) welding is an emerging process for welding of thicker components. In the present work, attempt was made to develop A-TIG welding technology for LAFM steel plates of 10 mm thick. Activated flux was developed for LAFM steel by carrying out various bead-on-plate TIG welds without flux and with flux. The optimum flux was identified as one which gave maximum depth of penetration at minimum heat input values. With the optimized flux composition, LAFM steel plate of 10 mm thickness was welded in square butt weld joint configuration using double side welding technique. Optical and Scanning Electron Microscopy was used for characterizing the microstructures. Microhardness measurements were made across the weld cross section for as welded and post weld heat treated samples. Tensile and impact toughness properties were determined. The mechanical properties values obtained in A-TIG weld joint were comparable to that obtained in weld joints of LAFM steel made by Electron beam welding process.

Studies on A-TIG welding of Low Activation Ferritic/Martensitic (LAFM) steel

Science.gov (United States)

Vasantharaja, P.; Vasudevan, M.

2012-02-01

Low Activation Ferritic-Martensitic steels (LAFM) are chosen as the candidate material for structural components in fusion reactors. The structural components are generally fabricated by welding processes. Activated Tungsten Inert Gas (A-TIG) welding is an emerging process for welding of thicker components. In the present work, attempt was made to develop A-TIG welding technology for LAFM steel plates of 10 mm thick. Activated flux was developed for LAFM steel by carrying out various bead-on-plate TIG welds without flux and with flux. The optimum flux was identified as one which gave maximum depth of penetration at minimum heat input values. With the optimized flux composition, LAFM steel plate of 10 mm thickness was welded in square butt weld joint configuration using double side welding technique. Optical and Scanning Electron Microscopy was used for characterizing the microstructures. Microhardness measurements were made across the weld cross section for as welded and post weld heat treated samples. Tensile and impact toughness properties were determined. The mechanical properties values obtained in A-TIG weld joint were comparable to that obtained in weld joints of LAFM steel made by Electron beam welding process.

Melting of SiC powders preplaced duplex stainless steel using TIG welding

Science.gov (United States)

Maleque, M. A.; Afiq, M.

2018-01-01

TIG torch welding technique is a conventional melting technique for the cladding of metallic materials. Duplex stainless steels (DSS) show decrease in performance under aggressive environment which may lead to unanticipated failure due to poor surface properties. In this research, surface modification is done by using TIG torch method where silicon carbide (SiC) particles are fused into DSS substrate in order to form a new intermetallic compound at the surface. The effect of particle size, feed rate of SiC preplacement, energy input and shielding gas flow rate on surface topography, microstructure, microstructure and hardness are investigated. Deepest melt pool (1.237 mm) is produced via TIG torch with highest energy input of 1080 J/mm. Observations of surface topography shows rippling marks which confirms that re-solidification process has taken place. Melt microstructure consist of dendritic and globular carbides precipitate as well as partially melted silicon carbides (SiC) particles. Micro hardness recorded at value ranging from 316 HV0.5 to 1277 HV0.5 which shows increment from base hardness of 260 HV0.5kgf. The analyzed result showed that incorporation of silicon carbide particles via TIG Torch method increase the hardness of DSS.

Lewis lung carcinoma progression is facilitated by TIG-3 fibroblast cells.

Science.gov (United States)

Yamauchi, Yoshikane; Izumi, Yotaro; Asakura, Keisuke; Kawai, Kenji; Wakui, Masatoshi; Ohmura, Mitsuyo; Suematsu, Makoto; Nomori, Hiroaki

2013-09-01

The interactions of tumor cells with stromal fibroblasts influence tumor biology, but the exact mechanisms involved are still unclear. In the present study, we evaluated the effects of a human lung fibroblast cell line, TIG-3, on Lewis lung carcinoma (LLC) cells both in vitro and in vivo. LLC and TIG-3 cells were co-cultured/co-implanted in vitro and in vivo. Cell invasion was assayed. Local tumor growth, as well as lung metastasis, were evaluated after subcutaneous cell co-implantation into NOD/SCID/γ-null (NOG) mice. LLC, and TIG-3 cells were pre-treated with either SB431542, a small molecule TGF-β receptor antagonist, or siRNA for transforming growth factor (TGF)-β before co-culture or co-implantation, and the effects of pre-treatments were compared both in cell culture and in mice. Subcutaneous LLC tumor growth (L group) in NOG mice was significantly increased by co-implantation of TIG-3 cells (L+T group) at four weeks. The number of macroscopic lung metastases was also significantly increased in the L+T group in comparison to the L group. In vitro cell invasion was significantly increased in the L+T group in comparison to the L group. In vitro expression of phosphorylated-SMAD3 was significantly increased in the L+T group in comparison to the L group. Furthermore, pre-treatment with either SB431542 or siRNA for TGF-β reduced the invasiveness both in culture and in mice. This study suggested that in vitro as well as in vivo progression of LLC was facilitated by co-culture/co-implantation with TIG-3 cells, and that this process was at least in part dependent on TGF-β-mediated interactions.

Comparisons between TiO2- and SiO2-flux assisted TIG welding processes.

Science.gov (United States)

Tseng, Kuang-Hung; Chen, Kuan-Lung

2012-08-01

This study investigates the effects of flux compounds on the weld shape, ferrite content, and hardness profile in the tungsten inert gas (TIG) welding of 6 mm-thick austenitic 316 L stainless steel plates, using TiO2 and SiO2 powders as the activated fluxes. The metallurgical characterizations of weld metal produced with the oxide powders were evaluated using ferritoscope, optical microscopy, and Vickers microhardness test. Under the same welding parameters, the penetration capability of TIG welding with TiO2 and SiO2 fluxes was approximately 240% and 292%, respectively. A plasma column made with SiO2 flux exhibited greater constriction than that made with TiO2 flux. In addition, an anode root made with SiO2 flux exhibited more condensation than that made with TiO2 flux. Results indicate that energy density of SiO2-flux assisted TIG welding is higher than that of TiO2-flux assisted TIG welding.

Clamp and Gas Nozzle for TIG Welding

Science.gov (United States)

Gue, G. B.; Goller, H. L.

1982-01-01

Tool that combines clamp with gas nozzle is aid to tungsten/inert-gas (TIG) welding in hard-to-reach spots. Tool holds work to be welded while directing a stream of argon gas at weld joint, providing an oxygen-free environment for tungsten-arc welding.

The characteristic investigation on narrow-gap TIG weld joint of heavy wall austenitic stainless steel pipe

International Nuclear Information System (INIS)

Shim, Deog Nam; Jung, In Cheol

2003-01-01

Although Gas Tungsten Arc Welding (GTAW or TIG welding) is considered as high quality and precision welding process, it also has demerit of low melting rate. Narrow-gap TIG welding which has narrow joint width reduces the groove volume remarkably, so it could be shorten the welding time and decrease the overall shrinkage in heavy wall pipe welding. Generally narrow-gap TIG welding is used as orbital welding process, it is important to select the optimum conditions for the automatic control welding. This paper looks at the application and metallurgical properties on narrow-gap TIG welding joint of heavy wall large austenitic stainless steel pipe to determine the deposition efficiency, the resultant shrinkage and fracture toughness. The fracture toughness depends slightly on the welding heat input

La educación geográfica empleando las TIG: una innovación necesaria

OpenAIRE

De Lázaro y Torres, María Luisa

2016-01-01

Aportación a la mesa redonda: “LA FORMACIÓN EN TIG EN LOS NUEVOS PLANES DE GRADOS Y MÁSTERES”, desarrollada en el marco del XVII Congreso Nacional de TIG. Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech.

A novel glutamine-rich putative transcriptional adaptor protein (TIG-1), preferentially expressed in placental and bone-marrow tissues.

Science.gov (United States)

Abraham, S; Solomon, W B

2000-09-19

We used a subtractive hybridization protocol to identify novel expressed sequence tags (ESTs) corresponding to mRNAs whose expression was induced upon exposure of the human leukemia cell line K562 to the phorbol ester 12-O-tetradecanolyphorbol-13-acetate (TPA). The complete open reading frame of one of the novel ESTs, named TIG-1, was obtained by screening K562 cell and placental cDNA libraries. The deduced open reading frame of the TIG-1 cDNA encodes for a glutamine repeat-rich protein with a predicted molecular weight of 63kDa. The predicted open reading frame also contains a consensus bipartite nuclear localization signal, though no specific DNA-binding domain is found. The corresponding TIG-1 mRNA is ubiquitously expressed. Placental tissue expresses the TIG-1 mRNA 200 times more than the lowest expressing tissues such as kidney and lung. There is also preferential TIG-1 mRNA expression in cells of bone-marrow lineage.In-vitro transcription/translation of the TIG-1 cDNA yielded a polypeptide with an apparent molecular weight of 97kDa. Using polyclonal antibodies obtained from a rabbit immunized with the carboxy-terminal portion of bacterially expressed TIG-1 protein, a polypeptide with molecular weight of 97kDa was identified by Western blot analyses of protein lysates obtained from K562 cells. Cotransfection assays of K562 cells, using a GAL4-TIG-1 fusion gene and GAL4 operator-CAT, indicate that the TIG-1 protein may have transcriptional regulatory activity when tethered to DNA. We hypothesize that this novel glutamine-rich protein participates in a protein complex that regulates gene transcription. It has been demonstrated by Naar et al. (Naar, A.M., Beaurang, P.A., Zhou, S., Abraham, S., Solomon, W.B., Tjian, R., 1999, Composite co-activator ARC mediates chromatin-directed transcriptional activation. Nature 398, 828-830) that the amino acid sequences of peptide fragments obtained from a polypeptide found in a complex of proteins that alters chromatin

Analysis of cracks in stainless steel TIG [tungsten inert gas] welds

International Nuclear Information System (INIS)

Nakagaki, M.; Marschall, C.; Brust, F.

1986-12-01

This report contains the results of a combined experimental and analytical study of ductile crack growth in tungsten inert gas (TIG) weldments of austenitic stainless steel specimens. The substantially greater yield strength of the weld metal relative to the base metal causes more plastic deformation in the base metal adjacent to the weld than in the weld metal. Accordingly, the analytical studies focused on the stress-strain interaction between the crack tip and the weld/base-metal interface. Experimental work involved tests using compact (tension) specimens of three different sizes and pipe bend experiments. The compact specimens were machined from a TIG weldment in Type 304 stainless steel plate. The pipe specimens were also TIG welded using the same welding procedures. Elastic-plastic finite element methods were used to model the experiments. In addition to the J-integral, different crack-tip integral parameters such as ΔT/sub p/* and J were evaluated. Also, engineering J-estimation methods were employed to predict the load-carrying capacity of the welded pipe with a circumferential through-wall crack under bending

Post-irradiation mechanical tests on F82H EB and TIG welds

International Nuclear Information System (INIS)

Rensman, J.; Osch, E.V. van; Horsten, M.G.; D'Hulst, D.S.

2000-01-01

The irradiation behaviour of electron beam (EB) and tungsten inert gas (TIG) welded joints of the reduced-activation martensitic steel IEA heat F82H-mod. was investigated by neutron irradiation experiments in the high flux reactor (HFR) in Petten. Mechanical test specimens, such as tensile specimens and KLST-type Charpy impact specimens, were neutron irradiated up to a dose level of 2-3 dpa at a temperature of 300 deg. C in the HFR reactor in Petten. The tensile results for TIG and EB welds are as expected with practically no strain hardening capacity left. Considering impact properties, there is a large variation in impact properties for the TIG weld. The irradiation tends to shift the DBTT of particularly the EB welds to very high values, some cases even above +250 deg. C. PWHT of EB-welded material gives a significant improvement of the DBTT and USE compared to the as-welded condition

Effect of laser power on clad metal in laser-TIG combined metal cladding

Science.gov (United States)

Utsumi, Akihiro; Hino, Takanori; Matsuda, Jun; Tasoda, Takashi; Yoneda, Masafumi; Katsumura, Munehide; Yano, Tetsuo; Araki, Takao

2003-03-01

TIG arc welding has been used to date as a method for clad welding of white metal as bearing material. We propose a new clad welding process that combines a CO2 laser and a TIG arc, as a method for cladding at high speed. We hypothesized that this method would permit appropriate control of the melted quantity of base metal by varying the laser power. We carried out cladding while varying the laser power, and investigated the structure near the boundary between the clad layer and the base metal. Using the laser-TIG combined cladding, we found we were able to control appropriately the degree of dilution with the base metal. By applying this result to subsequent cladding, we were able to obtain a clad layer of high quality, which was slightly diluted with the base metal.

A technical report on the evaluation of the integrity for the TIG welded spacer grid

International Nuclear Information System (INIS)

Song, Kee Nam; Yoo, Ho Sik; Lww, Chang Woo

1994-07-01

The spacer grid, which supports fuel rods, guide thimble and instrumentation tube, is classified into two types according to their strap material,.ie. inconel and zircaloy spacer grid. KOFA fuel of 14 x 14 and 17 x 17 type has seven and eight spacer grid respectively. Zircaloy spacer grid is assembled by straps whose cross points are welded by TIG welding method. This technical report provides to give some information about structure and function of the spacer grid and the basis and characteristic of the TIG welding method. A series of test which is conducted to evaluate the integrity of TIG welded zircaloy spacer grid and their results have been also studied. (Author) 18 refs., 23 figs., 3 tabs

A technical report on the evaluation of the integrity for the TIG welded spacer grid

Energy Technology Data Exchange (ETDEWEB)

Song, Kee Nam; Yoo, Ho Sik; Lww, Chang Woo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-07-01

The spacer grid, which supports fuel rods, guide thimble and instrumentation tube, is classified into two types according to their strap material,.ie. inconel and zircaloy spacer grid. KOFA fuel of 14 x 14 and 17 x 17 type has seven and eight spacer grid respectively. Zircaloy spacer grid is assembled by straps whose cross points are welded by TIG welding method. This technical report provides to give some information about structure and function of the spacer grid and the basis and characteristic of the TIG welding method. A series of test which is conducted to evaluate the integrity of TIG welded zircaloy spacer grid and their results have been also studied. (Author) 18 refs., 23 figs., 3 tabs.

Effect of A-TIG Welding Process on the Weld Attributes of Type 304LN and 316LN Stainless Steels

Science.gov (United States)

Vasudevan, M.

2017-03-01

The specific activated flux has been developed for enhancing the penetration performance of TIG welding process for autogenous welding of type 304LN and 316LN stainless steels through systematic study. Initially single-component fluxes were used to study their effect on depth of penetration and tensile properties. Then multi-component activated flux was developed which was found to produce a significant increase in penetration of 10-12 mm in single-pass TIG welding of type 304LN and 316LN stainless steels. The significant improvement in penetration achieved using the activated flux developed in the present work has been attributed to the constriction of the arc and as well as reversal of Marangoni flow in the molten weld pool. The use of activated flux has been found to overcome the variable weld penetration observed in 316LN stainless steel with TIG welds compared to that of the welds produced by conventional TIG welding on the contrary the transverse strength properties of the 304LN and 316LN stainless steel welds produced by A-TIG welding exceeded the minimum specified strength values of the base metals. Improvement in toughness values were observed in 316LN stainless steel produced by A-TIG welding due to refinement in the weld microstructure in the region close to the weld center. Thus, activated flux developed in the present work has greater potential for use during the TIG welding of structural components made of type 304LN and 316LN stainless steels.

A química da formação do cordão na soldagem TIG

Directory of Open Access Journals (Sweden)

Paulo J. Modenesi

2013-09-01

Full Text Available A soldagem TIG apresenta elevados níveis de estabilidade e permite um controle mais apurado do que a maioria dos demais processos de soldagem a arco. É bem conhecido, contudo, que pequenas variações de composição química do metal base ou da região de operação do arco podem ter um efeito pronunciado no formato do cordão de solda, o que reduz a capacidade de controlar e a previsibilidade do processo. Este trabalho apresenta uma revisão da variabilidade do cordão de solda obtido no processo TIG com pequenas alterações na composição química do metal base e das soldagens A-TIG e TIG com gás ativo. Aspectos comuns e particulares de cada caso são realçados e discutidos e os mecanismos propostos na literatura em cada caso são apresentados e comparados.

Automated TIG welding system with visual sensor for repairing nuclear plants

International Nuclear Information System (INIS)

Inoue, Katsunori; Watanabe, Hiroshi; Kondoh, Yoshihide.

1986-01-01

An automated TIG welding system has been developed. This system is to be used for repairing nuclear plants, whose work environment is highly radioactive, so should have the automatic self control function and the remote controllable function. For this purpose, the visual sensor, a TV camera and an image processor, is installed and the image processing technique is applied to the all-position TIG welding system. In this system, all controls are made with microprocessors and every necessary information is displayed on the screen of the remote control unit. The excellent performance was obtained as the application of this system to the practical field. (author)

Pulsed tig-welding in production

International Nuclear Information System (INIS)

Haylett, R.

1973-01-01

The first main application of the pulsed-TIG welding process in production used a combination of the method with the melt-through method to fit and weld annular shaped AISI 321 stainless steel inserts as part of the fabrication of a double-skinned vacuum insulation panel of stainless steel for the thermal insulation system of a sodium-cooled reactor. Other applications are discussed. It is concluded that the process could be more fully exploited in industry and that this might be achieved by the use of inexpensive pulse operation attachments. (U.K.)

Characterization of Tungsten Inert Gas (TIG) Welding Fume Generated by Apprentice Welders

Science.gov (United States)

Graczyk, Halshka; Lewinski, Nastassja; Zhao, Jiayuan; Concha-Lozano, Nicolas; Riediker, Michael

2016-01-01

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generated by welding apprentices with little experience in welding. We characterized TIG welding fume generated by apprentice welders (N = 20) in a ventilated exposure cabin. Exposure assessment was conducted for each apprentice welder at the breathing zone (BZ) inside of the welding helmet and at a near-field (NF) location, 60cm away from the welding task. We characterized particulate matter (PM4), particle number concentration and particle size, particle morphology, chemical composition, reactive oxygen species (ROS) production potential, and gaseous components. The mean particle number concentration at the BZ was 1.69E+06 particles cm−3, with a mean geometric mean diameter of 45nm. On average across all subjects, 92% of the particle counts at the BZ were below 100nm. We observed elevated concentrations of tungsten, which was most likely due to electrode consumption. Mean ROS production potential of TIG welding fumes at the BZ exceeded average concentrations previously found in traffic-polluted air. Furthermore, ROS production potential was significantly higher for apprentices that burned their metal during their welding task. We recommend that future exposure assessments take into consideration welding performance as a potential exposure modifier for apprentice welders or welders with minimal training. PMID:26464505

Cooperative role of calnexin and TigA in Aspergillus oryzae glycoprotein folding.

Science.gov (United States)

Wang, Ning; Seko, Akira; Takeda, Yoichi; Kikuma, Takashi; Ito, Yukishige

2015-10-01

Calnexin (CNX), known as a lectin chaperone located in the endoplasmic reticulum (ER), specifically recognizes G1M9GN2-proteins and facilitates their proper folding with the assistance of ERp57 in mammalian cells. However, it has been left unidentified how CNX works in Aspergillus oryzae, which is a filamentous fungus widely exploited in biotechnology. In this study, we found that a protein disulfide isomerase homolog TigA can bind with A. oryzae CNX (AoCNX), which was revealed to specifically recognize monoglucosylated glycans, similarly to CNX derived from other species, and accelerate the folding of G1M9GN2-ribonuclease (RNase) in vitro. For refolding experiments, a homogeneous monoglucosylated high-mannose-type glycoprotein G1M9GN2-RNase was chemoenzymatically synthesized from G1M9GN-oxazoline and GN-RNase. Denatured G1M9GN2-RNase was refolded with highest efficiency in the presence of both soluble form of AoCNX and TigA. TigA contains two thioredoxin domains with CGHC motif, mutation analysis of which revealed that the one in N-terminal regions is involved in binding to AoCNX, while the other in catalyzing protein refolding. The results suggested that in glycoprotein folding process of A. oryzae, TigA plays a similar role as ERp57 in mammalian cells, as a partner protein of AoCNX. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Anvendelse af MIP ved kildekarakterisering og vurdering af nedbrydning af chlorerede opløsningsmidler

DEFF Research Database (Denmark)

Broholm, Mette Martina; Janniche, Gry Sander; Damgaard, Ida

2014-01-01

Membrane Interface Probing (MIP) er et 'direct push' screeningsværktøj, som kan anvendes ved karakterisering af forurenede grunde. Karakterisering af kildeområder med chlorerede opløsningsmidler (som DNAPL) udgør et vigtigt led i udviklingen af den konceptuelle forståelse, som er essentiel...... for risikovurdering og valg af afværgestrategi. Integreret karakterisering med en række metoder for direkte såvel som indirekte dokumentation af DNAPL i moræneler, herunder MIP, er beskrevet i Kerrn-Jespersen et al. (2013). Det samlede DNAPL-karakteriseringsprojekt er beskrevet i detaljer i Janniche et al. (2013). En...... vurdering af anvendte detektorer for MIP er foretaget af Olsson (2013). Ved karakterisering af forurening med bl.a. chlorerede opløsningsmidler er der behov for en vurdering af forureningssammensætning og nedbrydning. Tilsvarende vurdering er nødvendig, når udviklingen af stimuleret reduktiv dechlorering...

The measurement of released radionuclides during TIG-Welding and Grinding

International Nuclear Information System (INIS)

Reichelt, A.; Lehmann, K.-H.; Reineking, A.; Eder, E.

2000-01-01

The radiological relevance of the TIG welding using thoriated tungsten electrodes has recently been proved by means of different studies. As a result of this the TUEV Sueddeutschland and the University of Goettingen have carried out special investigations concerning the release of radionuclides during TIG welding. The main emphasis of these investigations were the representativity of various sampling techniques, the influence of various parameters during welding as well as the determination of activity size distributions related to the aerodynamic diameter of the inhaled aerosols. The properties of the tungsten rods are improved through the addition of radioactive thorium. We investigated the radiation exposure by handling with thoriated tungsten welding rods. We investigated the different exposure pathways and determined the specific activity in dependence to the different types of welding rods. By carrying out surveys with the users, we determined the exposure pathways for the individual exposed persons: TIG - hand-welders', TIG 'machine-welders', labourers, other persons. We measured the activity concentration of the breathing air while welding, at grinding the electrodes and by staying in the rooms where usually it's welded. The size distribution of the aerosol-attached activity was determined with several kinds of impactors. The main emphasis was the comparison of the different sampling systems at the measuring of the activity concentration of the breathing air. Selective sampling by impactors: · Berner-impactor, stationary · Sierra-impactor, stationary · Anderson-Imcaktor, stationary · Marple-impactor, personal sampler Aerosol sampling by air samplers · 5 personal air sampler · 2 stationary sampler, ring face · 2 stationary sampler, open face Rn-220-Measurements · Thoron-monitor Determination of activities on measuring filters · alpha spectrometry · low-level-gamma-spectrometry. For the various exposed persons, at the extern irradiation with gamma

Recent advances in the TIG welding process and the application of the welding of nuclear components

International Nuclear Information System (INIS)

Lucas, W.; Males, B.O.

1982-01-01

Recent advances in the field of precision arc welding techniques and infacilities for production of nuclear power plant components arc presented. Of the precision welding techniques, pulsed TIG welding, pulsed plasma arc welding, hot-wire TIG welding, and pulsed inert-gas metal-arc welding. In the field of weld cladding, GMA plasma welding is cited as an alternative to submerged-arc welding with a strip electrode. Transistors and computer-controlled welding systems get a special mention. Applications of TIG welding in the UK are cited, e.g. welding of components for the AGR nuclear power plant and construction of equipment for repair work in feedwater pipes of the MAGNOX reactor. (orig.) [de

Development of maintenance technology with underwater TIG welding for spent fuel storage pool

International Nuclear Information System (INIS)

Obana, Takeshi; Hamada, Yasumitsu; Ooeda, Kaoru; Katou, Masahide; Ootsuka, Toshihiro; Toyoda, Seiichi; Hosogane, Atsushi

2007-01-01

The core technology of underwater TIG welding process has been developed and welding equipment system has been manufactured, for application to the maintenance of the spent fuel storage pool of Rokkasho reprocessing plant. Basic experiments for understanding the conditions of dry area and the range of welding conditions was performed, and mock examination for simulation of real environment by using the developed welding equipment was also carried out to judge the applicability of the system. For the purpose that can be selected water removing method for different spatial conditions of the parts to be maintained in underwater, two kinds of welding equipment systems of Chamber type and Partition type were developed and manufactured. On the basis of fundamental experiments, the conditions of dry area formation and welding parameters range for high-reliability weld were discussed. Thus the proper condition in this process was able to be established. With the welding equipment systems of the Chamber type and Partition type, the practical use examination of underwater TIG welding process was executed by mock examination for simulating the real environment. As a result, it was confirmed that the underwater TIG welding could obtain the same reliability as a usual in-air TIG welding, and the operation and the control at remote distance were also possible. And the reliability of the patch-plate fillet weld could be evaluated by remote inspection with the expansion visual test. (author)

Study on microstructure and mechanical properties of Al–Mg–Mn–Er alloy joints welded by TIG and laser beam

International Nuclear Information System (INIS)

Yang, Dongxia; Li, Xiaoyan; He, Dingyong; Huang, Hui; Zhang, Liang

2012-01-01

Highlights: ► The microstructural characterization of the TIG and laser welded Al–Mg–Mn–Er alloy is studied. ► Transition zone and HAZ are found to disappear near the fusion boundaries in LBW joint. ► Primary Al 3 Er in LBW weld provides more nucleation sites and lead to the grain refinement. ► The evaporation of alloying element Mg in TIG and LBW joints is investigated. ► Reasons for high strength of LBW joint are fine-grain strengthening and solution strengthening. -- Abstract: Al-4.7Mg-0.7Mn-0.3Er alloy plates were welded by laser beam welding (LBW) and tungsten inert gas (TIG). Mechanical properties and microstructures of both welded joints were analyzed. The results showed that the tensile strength of LBW joint was 315 MPa, which was approximately 10% higher than that of TIG welded joint. This was attributed to the fine grains, dispersed primary Al 3 Er phase and low Mg evaporation in LBW weld. Equiaxed grains with average size of 30 μm were obtained in the fusion zone, which were much smaller than that of 90 μm in the fusion zone of TIG joint, due to the low heat input during LBW process. Moreover, finer primary Al 3 Er particles were uniformly distributed in the LBW joints, which resulted in a substantial increase of nucleation rate in LBW welds. In addition, it was also found that Mg concentrations in the fusion zones, in both TIG and LBW joints, were lower than that of the base one tested by EPMA. The burning loss rates of Mg in TIG and LBW joints were 36% and 22%, respectively.

Development and modeling of hot tearing test in TIG welding of aluminum alloy 6056

OpenAIRE

Niel , Aurélie; Fras , Gilles; Deschaux-Beaume , Frédéric; Bordreuil , Cyril

2010-01-01

International audience; TIG welding process is widely used in the aeronautic industry. However, the increase of productivity which generally require an increase of welding speed is limited by the appearance of defects, such as hot tearing. This study focuses on the analysis of hot tearing in TIG welding on a 6056 aluminum alloy, used in aircraft manufacturing. Thanks to the developpement of an original hot tearing test and to numerical simulation of welding process, the influence of various p...

Optimization and Prediction of Angular Distortion and Weldment Characteristics of TIG Square Butt Joints

Science.gov (United States)

Narang, H. K.; Mahapatra, M. M.; Jha, P. K.; Biswas, P.

2014-05-01

Autogenous arc welds with minimum upper weld bead depression and lower weld bead bulging are desired as such welds do not require a second welding pass for filling up the upper bead depressions (UBDs) and characterized with minimum angular distortion. The present paper describes optimization and prediction of angular distortion and weldment characteristics such as upper weld bead depression and lower weld bead bulging of TIG-welded structural steel square butt joints. Full factorial design of experiment was utilized for selecting the combinations of welding process parameter to produce the square butts. A mathematical model was developed to establish the relationship between TIG welding process parameters and responses such as upper bead width, lower bead width, UBD, lower bead height (bulging), weld cross-sectional area, and angular distortions. The optimal welding condition to minimize UBD and lower bead bulging of the TIG butt joints was identified.

Teorijske i praktične osnove TIG postupka zavarivanja

OpenAIRE

Horvat, Marko; Kondić, Veljko; Brezovački, Dražen

2014-01-01

TIG/GTAW postupak zavarivanja je elektrolučni postupak zavarivanja netaljivom elektrodom u zaštitnoj atmosferi inertnih plinova ili smjesa plinova. U radu je prikazana kratka povijest i teorijske osnove postupka, prednosti i nedostaci te osvrt na praktične osnove primjene postupka.

Numerical simulation of TIG welding with filler of steel pieces of high thickness

International Nuclear Information System (INIS)

Carmignani, B.; Toselli, G.

1999-01-01

The problem of the numerical simulation of welding process with filler, in particular TIG (tungsten inert gas) with cold filler, has been approached with ABAQUS/S code. Reference has been made to some experimental models studied and prepared ad hoc in order to better know the physical phenomena involved in the TIG welding technique and to validate the computation methodologies and results obtained. This numerical simulation has been required in order to assist the fabrication development and QA for TF (toroidal field) coil case, an important component of ITER (international thermonuclear experimental reactor) machine [it

Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc

Science.gov (United States)

Zhang, Guangjun; Xiong, Jun; Gao, Hongming; Wu, Lin

2012-10-01

The twin-electrode TIG coupling arc is a new type of welding heat source, which is generated in a single welding torch that has two tungsten electrodes insulated from each other. This paper aims at determining the distribution of temperature for the coupling arc using the Fowler-Milne method under the assumption of local thermodynamic equilibrium. The influences of welding current, arc length, and distance between both electrode tips on temperature distribution of the coupling arc were analyzed. Based on the results, a better understanding of the twin-electrode TIG welding process was obtained.

Optimization of process parameters in welding of dissimilar steels using robot TIG welding

Science.gov (United States)

Navaneeswar Reddy, G.; VenkataRamana, M.

2018-03-01

Robot TIG welding is a modern technique used for joining two work pieces with high precision. Design of Experiments is used to conduct experiments by varying weld parameters like current, wire feed and travelling speed. The welding parameters play important role in joining of dissimilar stainless steel SS 304L and SS430. In this work, influences of welding parameter on Robot TIG Welded specimens are investigated using Response Surface Methodology. The Micro Vickers hardness tests of the weldments are measured. The process parameters are optimized to maximize the hardness of the weldments.

Microstructure and Hardness Variation in a TIG Weldment of Irradiated F82H

International Nuclear Information System (INIS)

Tanigawa, H.; Ando, M.; Sawai, T.; Shiba, K.; Hashimoto, N.; Klueh, R.L.

2003-01-01

Previous work reported that a TIG weld joint of F82H exhibited low irradiation hardening in a tensile test, compared to the base metal. Microhardness tests and microstructure observation on the neutron-irradiated TIG weld joint of F82H revealed that the over-tempered zone in the heat-affected zone (HAZ) exhibited this good performance. The region in the HAZ where the prior austenite grain size became very fine during welding also exhibited lower irradiation hardening. Hypotheses for these low-hardening mechanisms were proposed based on the phase diagram and grain size

Characterization of Tungsten Inert Gas (TIG) Welding Fume Generated by Apprentice Welders.

Science.gov (United States)

Graczyk, Halshka; Lewinski, Nastassja; Zhao, Jiayuan; Concha-Lozano, Nicolas; Riediker, Michael

2016-03-01

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generated by welding apprentices with little experience in welding. We characterized TIG welding fume generated by apprentice welders (N = 20) in a ventilated exposure cabin. Exposure assessment was conducted for each apprentice welder at the breathing zone (BZ) inside of the welding helmet and at a near-field (NF) location, 60cm away from the welding task. We characterized particulate matter (PM4), particle number concentration and particle size, particle morphology, chemical composition, reactive oxygen species (ROS) production potential, and gaseous components. The mean particle number concentration at the BZ was 1.69E+06 particles cm(-3), with a mean geometric mean diameter of 45nm. On average across all subjects, 92% of the particle counts at the BZ were below 100nm. We observed elevated concentrations of tungsten, which was most likely due to electrode consumption. Mean ROS production potential of TIG welding fumes at the BZ exceeded average concentrations previously found in traffic-polluted air. Furthermore, ROS production potential was significantly higher for apprentices that burned their metal during their welding task. We recommend that future exposure assessments take into consideration welding performance as a potential exposure modifier for apprentice welders or welders with minimal training. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Thick SS316 materials TIG welding development activities towards advanced fusion reactor vacuum vessel applications

Science.gov (United States)

Kumar, B. Ramesh; Gangradey, R.

2012-11-01

Advanced fusion reactors like ITER and up coming Indian DEMO devices are having challenges in terms of their materials design and fabrication procedures. The operation of these devices is having various loads like structural, thermo-mechanical and neutron irradiation effects on major systems like vacuum vessel, divertor, magnets and blanket modules. The concept of double wall vacuum vessel (VV) is proposed in view of protecting of major reactor subsystems like super conducting magnets, diagnostic systems and other critical components from high energy 14 MeV neutrons generated from fusion plasma produced by D-T reactions. The double walled vacuum vessel is used in combination with pressurized water circulation and some special grade borated steel blocks to shield these high energy neutrons effectively. The fabrication of sub components in VV are mainly used with high thickness SS materials in range of 20 mm- 60 mm of various grades based on the required protocols. The structural components of double wall vacuum vessel uses various parts like shields, ribs, shells and diagnostic vacuum ports. These components are to be developed with various welding techniques like TIG welding, Narrow gap TIG welding, Laser welding, Hybrid TIG laser welding, Electron beam welding based on requirement. In the present paper the samples of 20 mm and 40 mm thick SS 316 materials are developed with TIG welding process and their mechanical properties characterization with Tensile, Bend tests and Impact tests are carried out. In addition Vickers hardness tests and microstructural properties of Base metal, Heat Affected Zone (HAZ) and Weld Zone are done. TIG welding application with high thick SS materials in connection with vacuum vessel requirements and involved criticalities towards welding process are highlighted.

Thick SS316 materials TIG welding development activities towards advanced fusion reactor vacuum vessel applications

International Nuclear Information System (INIS)

Kumar, B Ramesh; Gangradey, R

2012-01-01

Advanced fusion reactors like ITER and up coming Indian DEMO devices are having challenges in terms of their materials design and fabrication procedures. The operation of these devices is having various loads like structural, thermo-mechanical and neutron irradiation effects on major systems like vacuum vessel, divertor, magnets and blanket modules. The concept of double wall vacuum vessel (VV) is proposed in view of protecting of major reactor subsystems like super conducting magnets, diagnostic systems and other critical components from high energy 14 MeV neutrons generated from fusion plasma produced by D-T reactions. The double walled vacuum vessel is used in combination with pressurized water circulation and some special grade borated steel blocks to shield these high energy neutrons effectively. The fabrication of sub components in VV are mainly used with high thickness SS materials in range of 20 mm- 60 mm of various grades based on the required protocols. The structural components of double wall vacuum vessel uses various parts like shields, ribs, shells and diagnostic vacuum ports. These components are to be developed with various welding techniques like TIG welding, Narrow gap TIG welding, Laser welding, Hybrid TIG laser welding, Electron beam welding based on requirement. In the present paper the samples of 20 mm and 40 mm thick SS 316 materials are developed with TIG welding process and their mechanical properties characterization with Tensile, Bend tests and Impact tests are carried out. In addition Vickers hardness tests and microstructural properties of Base metal, Heat Affected Zone (HAZ) and Weld Zone are done. TIG welding application with high thick SS materials in connection with vacuum vessel requirements and involved criticalities towards welding process are highlighted.

Mechanical Properties and Microstructure of TIG and FSW Joints of a New Al-Mg-Mn-Sc-Zr Alloy

Science.gov (United States)

Xu, Guofu; Qian, Jian; Xiao, Dan; Deng, Ying; Lu, Liying; Yin, Zhimin

2016-04-01

A new Al-5.8%Mg-0.4%Mn-0.25%Sc-0.10%Zr (wt.%) alloy was successfully welded by tungsten inert gas (TIG) and friction stir welding (FSW) techniques, respectively. The mechanical properties and microstructure of the welded joints were investigated by microhardness measurements, tensile tests, and microscopy methods. The results show that the ultimate tensile strength, yield strength, and elongation to failure are 358, 234 MPa, and 27.6% for TIG welded joint, and 376, 245 MPa and 31.9% for FSW joint, respectively, showing high strength and superior ductility. The TIG welded joint fails in the heat-affected zone and the fracture of FSW joint is located in stirred zone. Al-Mg-Mn-Sc-Zr alloy is characterized by lots of dislocation tangles and secondary coherent Al3(Sc,Zr) particles. The superior mechanical properties of the TIG and FSW joints are mainly derived from the Orowan strengthening and grain boundary strengthening caused by secondary coherent Al3(Sc,Zr) nano-particles (20-40 nm). For new Al-Mg-Mn-Sc-Zr alloy, the positive effect from secondary Al3(Sc, Zr) particles in the base metal can be better preserved in FSW joint than in TIG welded joint.

Creep strength of hastelloy X TIG-welded cylinder under internal pressure at elevated temperature

International Nuclear Information System (INIS)

Udoguchi, Teruyoshi; Indo, Hirosato; Isomura, Kazuyuki; Kobatake, Kiyokazu; Nakanishi, Tsuneo.

1981-01-01

Creep tests on circumferentially TIG-welded Hastelloy x cylinders were carried out under internal pressure for the investigation of structural behavior of welded components in high temperature environment. The creep rupture strength of TIG-welded cylinders was much lower than that of non-welded cylinders, while such reduction was not found in uniaxial creep tests on TIG-welded bars. It was deduced that the reduction was due to the low ductility (ranging from 1 to 5%) of the weld metal to which enhanced creep was induced by the adjacent base metal whose creep strain rate was much higher than that of the weld metal. Therefore, uniaxial creep tests on bar specimens is not sufficient for proper assessment of the creep rupture strength of welded components. Both creep strain rate and creep ductility should be concerned for the assessment. Creep tests by using components such as cylinder under internal pressure are recommendable for the confirmation of creep strength of welded structures and components. (author)

Soldadura TIG de espumas de aluminio. Análisis de los parámetros operacionales de espumado

Directory of Open Access Journals (Sweden)

Portolés, A.

2011-06-01

Full Text Available In this work the influence of main parameters that take part during TIG welding process are analyzed. Some of these parameters belong to the welding process, as for example the welding speed, intensity and voltage while others are from the material and tooling features, as for example foaming material and tooling design. The result of this work shows a strong dependence on these parameters of the TIG welding process for metallic foams.

En este trabajo se analiza la influencia de los principales parámetros que intervienen en el proceso de soldadura TIG. Algunos de estos parámetros pertenecen al proceso de soldadura, velocidad de soldadura, intensidad y tensión, mientras otros son propios de las características del material y el utillaje, material precursor y forma de implementar la instalación de ensayo. El resultado de este trabajo muestra una fuerte dependencia de estos parámetros con el proceso de soldadura TIG para las espumas metálicas de aluminio.

The measurement of released radionuclides during TIG-Welding and Grinding

Energy Technology Data Exchange (ETDEWEB)

Reichelt, A.; Lehmann, K.-H. [Technical Inspection Agency of Southern Germany (TUEV Sueddeutschland), Subdepartment Environmental Radioactivity, Munich (Germany); Reineking, A. [Isotope Laboratory for Biological and Medical Research, Georg-August-University of Goettingen, Goettingen (Germany); Eder, E. [Government of Bavaria, State Ministry for State Development and Environmental Affairs, Munich (Germany)

2000-05-01

The radiological relevance of the TIG welding using thoriated tungsten electrodes has recently been proved by means of different studies. As a result of this the TUEV Sueddeutschland and the University of Goettingen have carried out special investigations concerning the release of radionuclides during TIG welding. The main emphasis of these investigations were the representativity of various sampling techniques, the influence of various parameters during welding as well as the determination of activity size distributions related to the aerodynamic diameter of the inhaled aerosols. The properties of the tungsten rods are improved through the addition of radioactive thorium. We investigated the radiation exposure by handling with thoriated tungsten welding rods. We investigated the different exposure pathways and determined the specific activity in dependence to the different types of welding rods. By carrying out surveys with the users, we determined the exposure pathways for the individual exposed persons: TIG - hand-welders', TIG 'machine-welders', labourers, other persons. We measured the activity concentration of the breathing air while welding, at grinding the electrodes and by staying in the rooms where usually it's welded. The size distribution of the aerosol-attached activity was determined with several kinds of impactors. The main emphasis was the comparison of the different sampling systems at the measuring of the activity concentration of the breathing air. Selective sampling by impactors: {center_dot} Berner-impactor, stationary {center_dot} Sierra-impactor, stationary {center_dot} Anderson-Imcaktor, stationary {center_dot} Marple-impactor, personal sampler Aerosol sampling by air samplers {center_dot} 5 personal air sampler {center_dot} 2 stationary sampler, ring face {center_dot} 2 stationary sampler, open face Rn-220-Measurements {center_dot} Thoron-monitor Determination of activitys on measuring filters {center_dot} alpha

Lyden af musik - er lyden af idealisme

DEFF Research Database (Denmark)

Eigtved, Michael

2015-01-01

Programartiklen til Det Ny Teaters opsætning af Rodgers & Hammersteins The Sound of Music, undersøger musicalgenrens - og især de konkrete ophavsmænds- affinitet til fremstillingen af såvel idealistiske som ideologiske universer.......Programartiklen til Det Ny Teaters opsætning af Rodgers & Hammersteins The Sound of Music, undersøger musicalgenrens - og især de konkrete ophavsmænds- affinitet til fremstillingen af såvel idealistiske som ideologiske universer....

Establishment of human induced pluripotent stem cell lines from normal fibroblast TIG-1.

Science.gov (United States)

Kumazaki, Tsutomu; Kurata, Sayaka; Matsuo, Taira; Mitsui, Youji; Takahashi, Tomoko

2011-06-01

Normal human cells have a replicative life span and therefore senesce. Usually, normal human cell strains are differentiated cells and reach a terminally differentiated state after a number of cell divisions. At present, definitive differences are not known between replicative senescence and terminal differentiation. TIG-1 is a human fibroblast strain established from fetal lung and has been used extensively in studies of cellular senescence, and numerous data were accumulated at the molecular level. Recently, a method for generating induced pluripotent stem cells (iPSCs) was developed. Using the method, we introduced four reprogramming genes to TIG-1 fibroblasts and succeeded in isolating colonies that had embryonic stem cell (ESC)-like morphologies. They showed alkaline phosphatase activity and expressed ESC markers, as shown by immunostaining of OCT4, SOX2, SSEA4, and TRA-1-81 as well as reverse-transcription polymerase chain reaction (RT-PCR) for OCT4 and NANOG transcripts. Thus, we succeeded in establishing iPSC clones from TIG-1. The iPSC clones could differentiate to cells originated from all three germ-cell layers, as shown by RT-PCR, for messenger RNA (mRNA) expression of α-fetoprotein (endoderm), MSX1 (mesoderm) and microtubule-associated protein 2 (ectoderm), and by immunostaining for α-fetoprotein (endoderm), α-smooth muscle actin (mesoderm), and β-III-tubulin (ectoderm). The iPSCs formed teratoma containing the structures developed from all three germ-cell layers in severe combined immune-deficiency mice. Thus, by comparing the aging process of parental TIG-1 cells and the differentiation process of iPSC-derived fibrocytes to fibroblasts, we can reveal the exact differences in processes between senescence and terminal differentiation.

Studies on the weldability, microstructure and mechanical properties of activated flux TIG weldments of Inconel 718

International Nuclear Information System (INIS)

Ramkumar, K. Devendranath; Kumar, B. Monoj; Krishnan, M. Gokul; Dev, Sidarth; Bhalodi, Aman Jayesh; Arivazhagan, N.; Narayanan, S.

2015-01-01

This research article addresses the joining of 5 mm thick plates of Inconel 718 by activated flux tungsten inert gas (A-TIG) welding process using SiO 2 and TiO 2 fluxes. Microstructure studies inferred the presence of Nb rich eutectics and/or laves phase in the fusion zone of the A-TIG weldments. Tensile studies corroborated that the ultimate tensile strength of TiO 2 flux assisted weldments (885 MPa) was better compared to SiO 2 flux assisted weldments (815 MPa) and the failure was observed in the parent metal for both the cases. Impact test results portrayed that both the weldments were inferior in toughness as compared to the parent metal, which was due to the presence of oxide inclusions. Also, the study investigated the structure–property relationships of the A-TIG weldments of Inconel 718

Flexural strength of pure Ti, Ni-Cr and Co-Cr alloys submitted to Nd:YAG laser or TIG welding.

Science.gov (United States)

Rocha, Rick; Pinheiro, Antônio Luiz Barbosa; Villaverde, Antonio Balbin

2006-01-01

Welding of metals and alloys is important to Dentistry for fabrication of dental prostheses. Several methods of soldering metals and alloys are currently used. The purpose of this study was to assess, using the flexural strength testing, the efficacy of two processes Nd:YAG laser and TIG (tungsten inert gas) for welding of pure Ti, Co-Cr and Ni-Cr alloys. Sixty cylindrical specimens were prepared (20 of each material), bisected and welded using different techniques. Four groups were formed (n=15). I: Nd:YAG laser welding; II- Nd:YAG laser welding using a filling material; III- TIG welding and IV (control): no welding (intact specimens). The specimens were tested in flexural strength and the results were analyzed statistically by one-way ANOVA. There was significant differences (pTIG and laser welding and also between laser alone and laser plus filling material. In conclusion, TIG welding yielded higher flexural strength means than Nd:YAG laser welding for the tested Ti, Co-Cr and Ni-Cr alloys.

Experimental Investigation and Optimization of TIG Welding Parameters on Aluminum 6061 Alloy Using Firefly Algorithm

Science.gov (United States)

Kumar, Rishi; Mevada, N. Ramesh; Rathore, Santosh; Agarwal, Nitin; Rajput, Vinod; Sinh Barad, AjayPal

2017-08-01

To improve Welding quality of aluminum (Al) plate, the TIG Welding system has been prepared, by which Welding current, Shielding gas flow rate and Current polarity can be controlled during Welding process. In the present work, an attempt has been made to study the effect of Welding current, current polarity, and shielding gas flow rate on the tensile strength of the weld joint. Based on the number of parameters and their levels, the Response Surface Methodology technique has been selected as the Design of Experiment. For understanding the influence of input parameters on Ultimate tensile strength of weldment, ANOVA analysis has been carried out. Also to describe and optimize TIG Welding using a new metaheuristic Nature - inspired algorithm which is called as Firefly algorithm which was developed by Dr. Xin-She Yang at Cambridge University in 2007. A general formulation of firefly algorithm is presented together with an analytical, mathematical modeling to optimize the TIG Welding process by a single equivalent objective function.

Comparison of Plasma, Metal Inactive Gas (MIG) and Tungsten Inactive Gas (TIG) Processes for Laser Hybrid Welding (302)

DEFF Research Database (Denmark)

Bagger, Claus; Olsen, Flemming Ove

2003-01-01

enables a more stable ignition and running process than both TIG and MIG hybrid welding. Because of the delivery of extra material from a hot wire, the MIG hybrid process is well suited for bridging gaps of up to 0.6 mm in butt-welding of 2 mm steel. But because of the constant delivery of new material......, the MIG process is more difficult to control than laser/plasma and laser/TIG processes. All three types of secondary heat sources enable an increased ductility of the weld as compared to pure laser welding when welding 1.8 mm GA 260 with a TIG torch and 2.13 mm CMn steel with a plasma arc or MIG...

Multi-pass TIG welding process: simulating thermal SS304

International Nuclear Information System (INIS)

Harinadh, Vemanaboina; Akella, S.; Buddu, Ramesh Kumar; Edision, G.

2015-01-01

Welding is basic requirement in the construction of nuclear reactors, power plants and structural components development. A basic studies on various aspects of the welding is essential to ensure the stability and structural requirement conditions. The present study explored the thermo-mechanical analysis of the multipass welds of austenitic stainless steels which are widely used in fusion and fission reactor components development. A three-dimensional (3D) finite element model is developed to investigate thermally induced stress field during TIG welding process for SS304 material. The transient thermal analysis is performed to obtain the temperature history, which then is applied to the mechanical (stress) analysis. The present thermal analysis is conducted using element type DC3D8. This element type has a three dimensional thermal conduction capability and eight nodes. The 6 mm thick plated is welded with six numbers of passes. The geometry and meshed model with tetrahedral shape with volume sweep. The analysis is on TIG welding process using 3D-weld interface plug-in on ABAQUS-6.14. The results are reported in the present paper

En genlæsning af John Rawls i lyset af hans diskussion af forholdet til fremtidige generationer

DEFF Research Database (Denmark)

Lübcke, Poul

2009-01-01

På grundlag af en konsekventialistisk rekonstruktion af Rawls' politiske position gøres der rede for Rawls eksplicitte og implicitte vurdering af vores ansvar over for fremtidige generationer......På grundlag af en konsekventialistisk rekonstruktion af Rawls' politiske position gøres der rede for Rawls eksplicitte og implicitte vurdering af vores ansvar over for fremtidige generationer...

Experimental characterization of the weld pool flow in a TIG configuration

Science.gov (United States)

Stadler, M.; Masquère, M.; Freton, P.; Franceries, X.; Gonzalez, J. J.

2014-11-01

Tungsten Inert Gas (TIG) welding process relies on heat transfer between plasma and work piece leading to a metallic weld pool. Combination of different forces produces movements on the molten pool surface. One of our aims is to determine the velocity on the weld pool surface. This provides a set of data that leads to a deeper comprehension of the flow behavior and allows us to validate numerical models used to study TIG parameters. In this paper, two diagnostic methods developed with high speed imaging for the determination of velocity of an AISI 304L stainless steel molten pool are presented. Application of the two methods to a metallic weld pool under helium with a current intensity of 100 A provides velocity values around 0.70 m/s which are in good agreement with literature works.

Energirenovering af parcelhuse

DEFF Research Database (Denmark)

Aggerholm, Søren

af de tre huse består i efterisolering af lofter op til 300 mm, udskiftning af almindelige termoruder til energiruder, og installation af solvarmeanlæg til produktion af varmt brugsvand. I de tre huse er der ved energirenoveringen opnået en reduktion af energiforbruget på 16-22 procent. Rapporten...

Research on TIG weld machine of the upper side ring slot of Gd-rod technology reconstruct

International Nuclear Information System (INIS)

Fang Shixiang; Lan Zhibing; Cui Quhu

2010-01-01

The research on TIG weld machine of the upper side ring slot of Gd-rod existent matter: seal electrical source got up difficulty; control system had graveness aging; space between was adjusted precision lowness; welding torch lay mode and structure were not in reason. carried through all around technology reconstruct: had chosen the best of TIG weld machine; designed ignite arc device, designed optics imaging device, designed tungsten mighty axis direction auto conditioning, was provided with arc slot, adopted PLC to control the whole system and realization auto control. After TIG weld machine of the upper side ring slot of Gd-rod technology reconstruct research , provided with arc slot the first time in the Gd-rod of nuclear fuel, optimized the weld technics, improved welding line melt width and deep equality, stability, and great breadth advanced nuclear fuel product line technology and throughput. (authors)

Studies on the weldability, microstructure and mechanical properties of activated flux TIG weldments of Inconel 718

Energy Technology Data Exchange (ETDEWEB)

Ramkumar, K. Devendranath, E-mail: ramdevendranath@gmail.com; Kumar, B. Monoj; Krishnan, M. Gokul; Dev, Sidarth; Bhalodi, Aman Jayesh; Arivazhagan, N.; Narayanan, S.

2015-07-15

This research article addresses the joining of 5 mm thick plates of Inconel 718 by activated flux tungsten inert gas (A-TIG) welding process using SiO{sub 2} and TiO{sub 2} fluxes. Microstructure studies inferred the presence of Nb rich eutectics and/or laves phase in the fusion zone of the A-TIG weldments. Tensile studies corroborated that the ultimate tensile strength of TiO{sub 2} flux assisted weldments (885 MPa) was better compared to SiO{sub 2} flux assisted weldments (815 MPa) and the failure was observed in the parent metal for both the cases. Impact test results portrayed that both the weldments were inferior in toughness as compared to the parent metal, which was due to the presence of oxide inclusions. Also, the study investigated the structure–property relationships of the A-TIG weldments of Inconel 718.

Kortlægning af evalueringer og undersøgelser af vejledning knyttet til vejledning af unge i UU-regi

DEFF Research Database (Denmark)

Skovhus, Randi Boelskifte; thomsen, rie

2013-01-01

Kortlægning af evalueringer og undersøgelser af vejledning knyttet til vejledning af unge i UU-regi 2004-2013. Et arbejdspapir......Kortlægning af evalueringer og undersøgelser af vejledning knyttet til vejledning af unge i UU-regi 2004-2013. Et arbejdspapir...

Laser-TIG Welding of Titanium Alloys

Science.gov (United States)

Turichin, G.; Tsibulsky, I.; Somonov, V.; Kuznetsov, M.; Akhmetov, A.

2016-08-01

The article presents the results of investigation the technological opportunity of laser-TIG welding of titanium alloys. The experimental stand for implementation of process with the capability to feed a filler wire was made. The research of the nature of transfer the filler wire into the welding pool has been demonstrated. The influence of distance between the electrode and the surface of the welded plates on the stability of the arc was shown. The relationship between welding velocity, the position of focal plane of the laser beam and the stability of penetration of plates was determined.

Fremtidssikring af kloaknet

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2008-01-01

Beskrivelse af hvordan man ved udbygning af eksisterende kloaknet og ved nytænkning af planlægning af nye bydele kan sikre sig langsigtet mod konsekvenserne af klimaændinger og kraftigere nedbør...

Optimization of process parameters of pulsed TIG welded maraging steel C300

Science.gov (United States)

Deepak, P.; Jualeash, M. J.; Jishnu, J.; Srinivasan, P.; Arivarasu, M.; Padmanaban, R.; Thirumalini, S.

2016-09-01

Pulsed TIG welding technology provides excellent welding performance on thin sections which helps to increase productivity, enhance weld quality, minimize weld costs, and boost operator efficiency and this has drawn the attention of the welding society. Maraging C300 steel is extensively used in defence and aerospace industry and thus its welding becomes an area of paramount importance. In pulsed TIG welding, weld quality depends on the process parameters used. In this work, Pulsed TIG bead-on-plate welding is performed on a 5mm thick maraging C300 plate at different combinations of input parameters: peak current (Ip), base current (Ib) and pulsing frequency (HZ) as per box behnken design with three-levels for each factor. Response surface methodology is utilized for establishing a mathematical model for predicting the weld bead depth. The effect of Ip, Ib and HZ on the weld bead depth is investigated using the developed model. The weld bead depth is found to be affected by all the three parameters. Surface and contour plots developed from regression equation are used to optimize the processing parameters for maximizing the weld bead depth. Optimum values of Ip, Ib and HZ are obtained as 259 A, 120 A and 8 Hz respectively. Using this optimum condition, maximum bead depth of the weld is predicted to be 4.325 mm.

On post-weld heat treatment cracking in tig welded superalloy ATI 718Plus

Science.gov (United States)

Asala, G.; Ojo, O. A.

The susceptibility of heat affected zone (HAZ) to cracking in Tungsten Inert Gas (TIG) welded Allvac 718Plus superalloy during post-weld heat treatment (PWHT) was studied. Contrary to the previously reported case of low heat input electron beam welded Allvac 718Plus, where HAZ cracking occurred during PWHT, the TIG welded alloy is crack-free after PWHT, notwithstanding the presence of similar micro-constituents that caused cracking in the low input weld. Accordingly, the formation of brittle HAZ intergranular micro-constituents may not be a sufficient factor to determine cracking propensity, the extent of heat input during welding may be another major factor that influences HAZ cracking during PWHT of the aerospace superalloy Allvac 718Plus.

Tig welding produces leak-proof joints for nuclear application

International Nuclear Information System (INIS)

Anon.

1975-01-01

A pulsed welding apparatus using a Hobart Cyber-tig power source with programmed pulsed current has been developed to produce leak-free welds required for a new hermetically sealed leak-free valve for use in nuclear power plants. Advantages of the technique are precise control over travel speed and filler metal addition allowing the weld to be repeated with precision. (R.A.)

[Impact of introduction of O2 on the welding arc of gas pool coupled activating TIG].

Science.gov (United States)

Huang, Yong; Wang, Yan-Lei; Zhang, Zhi-Guo

2014-05-01

In the present paper, Boltzmann plot method was applied to analyze the temperature distributions of the are plasma when the gas pool coupled activating TIG welding was at different coupling degrees with the outer gas being O2. Based on this study of temperature distributions, the changing regularities of are voltage and are appearance were studied. The result shows that compared with traditional TIG welding, the introduction of O2 makes the welding arc constricted slightly, the temperature of the are center build up, and the are voltage increase. When argon being the inner gas, oxygen serving as the outer gas instead of argon makes the are constricted more obviously. When the coupling degree increases from 0 to 2, the temperature of the are center and the are voltage both increase slightly. In the gas pool coupled activating TIG welding the are is constricted not obviously, and the reason why the weld penetration is improved dramatically in the welding of stainless steel is not are constriction.

Optimization of hybrid laser - TIG welding of 316LN steel using response surface methodology (RSM)

Science.gov (United States)

Ragavendran, M.; Chandrasekhar, N.; Ravikumar, R.; Saxena, Rajesh; Vasudevan, M.; Bhaduri, A. K.

2017-07-01

In the present study, the hybrid laser - TIG welding parameters for welding of 316LN austenitic stainless steel have been investigated by combining a pulsed laser beam with a TIG welding heat source at the weld pool. Laser power, pulse frequency, pulse duration, TIG current were presumed as the welding process parameters whereas weld bead width, weld cross-sectional area and depth of penetration (DOP) were considered as the process responses. Central composite design was used to complete the design matrix and welding experiments were conducted based on the design matrix. Weld bead measurements were then carried out to generate the dataset. Multiple regression models correlating the process parameters with the responses have been developed. The accuracy of the models were found to be good. Then, the desirability approach optimization technique was employed for determining the optimum process parameters to obtain the desired weld bead profile. Validation experiments were then carried out from the determined optimum process parameters. There was good agreement between the predicted and measured values.

Mechanical strength and analysis of fracture of titanium joining submitted to laser and tig welding

Directory of Open Access Journals (Sweden)

Ana Cláudia Gabrielli Piveta

2012-12-01

Full Text Available This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG welds in cylindrical rods of commercially pure titanium (cp Ti with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and positioned in a plasma arc welding machine under argon atmosphere and vacuum, and titanium was injected under vacuum/pressure. The samples were X-rayed to detect possible welding flaws and randomly assigned to three groups to test the tensile strength and the fracture mechanism: intact, laser welding, and TIG welding. The tensile test results were investigated using ANOVA, which indicated that the samples were statistically similar. The fracture analysis showed that the cpTi samples subjected to laser welding exhibited brittle fracture and those subjected to TIG welding exhibited mixed brittle/ductile fracture with a predominance of ductile fracture with the presence of microcavities and cleavage areas. Intact samples presented the characteristic straightening in the fracture areas, indicating the ductility of the material.

Welding of Thin Steel Plates by Hybrid Welding Process Combined TIG Arc with YAG Laser

Science.gov (United States)

Kim, Taewon; Suga, Yasuo; Koike, Takashi

TIG arc welding and laser welding are used widely in the world. However, these welding processes have some advantages and problems respectively. In order to improve problems and make use of advantages of the arc welding and the laser welding processes, hybrid welding process combined the TIG arc with the YAG laser was studied. Especially, the suitable welding conditions for thin steel plate welding were investigated to obtain sound weld with beautiful surface and back beads but without weld defects. As a result, it was confirmed that the shot position of the laser beam is very important to obtain sound welds in hybrid welding. Therefore, a new intelligent system to monitor the welding area using vision sensor is constructed. Furthermore, control system to shot the laser beam to a selected position in molten pool, which is formed by TIG arc, is constructed. As a result of welding experiments using these systems, it is confirmed that the hybrid welding process and the control system are effective on the stable welding of thin stainless steel plates.

The application of TIG-welding to the manufacture of modern boiler units. Chapter 3

International Nuclear Information System (INIS)

Dick, N.T.

1978-01-01

Stringent weld acceptance standards are necessary in nuclear installations. Mechanised TIG-welding is being used exclusively in the manufacture of the boiler pods for the Hartlepool and Heysham nuclear generating stations. The choice of a TIG welding process is discussed. Reliability, access, welding position, tube dimensions and weld profile were important as was the desirability of having ferrite control because in the austenitic stainless steel used, the acceptance standard does not permit microfissuring. Development of the technique and production equipment and conditions are given for tube butt welding, tube-to-tubeplate bore welding and tube-to-tubeplate face welding in AGR applications. (U.K.)

A comparative study of pulsed Nd:YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate

International Nuclear Information System (INIS)

Gao, Xiao-Long; Zhang, Lin-Jie; Liu, Jing; Zhang, Jian-Xun

2013-01-01

This paper reports on a study aiming at comparing properties of the Ti6Al4V titanium alloy joints between pulsed Nd:YAG laser welding and traditional fusion welding. To achieve the research purpose, Ti6Al4V titanium alloy plates with a thickness of 0.8 mm were welded using pulsed Nd:YAG laser beam welding (LBW) and gas tungsten arc welding (TIG), respectively. Residual distortions, weld geometry, microstructure and mechanical properties of the joints produced with LBW and TIG welding were compared. During the tensile test, with the aid of a high speed infrared camera, evolution of the plastic strain within tensile specimens corresponding to LBW and TIG welding were recorded and analyzed. Compared with the TIG, the welded joint by LBW has the characters of small overall residual distortion, fine microstructure, narrow heat-affected zone (HAZ), high Vickers hardness. LBW welding method can produce joints with higher strength and ductility. It can be concluded that Pulsed Nd:YAG laser welding is much more suitable for welding the thin Ti6Al4V titanium alloy plate than TIG welding.

Fermentering af korn øger fordøjeligheden af næringsstoffer

DEFF Research Database (Denmark)

Pedersen, Anni Øyan; Jørgensen, Henry Johs. Høgh; Knudsen, Knud Erik Bach

2010-01-01

Et fordøjelighedsforsøg har vist, at energiværdien af byg og hvede steg ved fermentering. Effekten var størst ved fermentering af byg, hvor fordøjeligheden af organisk stof for enden af tyndtarmen steg statistisk sikkert med 9 %. Ved fermentering af hvede steg fordøjeligheden af organisk stof...... af vand og dels CO2-produktion og dermed tørstoftab. Anbefaling om beregning af energiværdi i fermenteret korn vil blive foretaget ud fra resultaterne af et produktionsforsøg med slagtesvin, som er under publicering. Fosforudnyttelse i fermenteret korn undersøges yderligere i et produktionsforsøg med...

[Calculation and analysis of arc temperature field of pulsed TIG welding based on Fowler-Milne method].

Science.gov (United States)

Xiao, Xiao; Hua, Xue-Ming; Wu, Yi-Xiong; Li, Fang

2012-09-01

Pulsed TIG welding is widely used in industry due to its superior properties, and the measurement of arc temperature is important to analysis of welding process. The relationship between particle densities of Ar and temperature was calculated based on the theory of spectrum, the relationship between emission coefficient of spectra line at 794.8 nm and temperature was calculated, arc image of spectra line at 794.8 nm was captured by high speed camera, and both the Abel inversion and Fowler-Milne method were used to calculate the temperature distribution of pulsed TIG welding.

Comparative study of TIG and SMAW root welding passes on ductile iron cast weldability

Directory of Open Access Journals (Sweden)

J. Cárcel-Carrasco

2017-01-01

Full Text Available This work compares the weldability of ductile iron when: (I a root weld is applied with a tungsten inert gas (TIG process using an Inconel 625 source rod and filler welds are subsequently applied using coated electrodes with 97,6%Ni; and (II welds on ductile iron exclusively made using the manual shielded metal arc welding technique (SMAW. Both types of welds are performed on ductile iron specimen test plates that are subjected to preheat and post-weld annealing treatments. Samples with TIG root-welding pass shown higher hardness but slightly lower ductility and strength. Both types of welding achieved better ductile and strength properties than ones found in literature.

Current and Developing Conceptions of Use: Evaluation Use TIG Survey Results.

Science.gov (United States)

Preskill, Hallie; Caracelli, Valerie

1997-01-01

A survey was sent to members of the Evaluation Use Topical Interest Group (TIG) to determine their perceptions about and experiences with evaluation use. Responses from 282 members show agreement on the major purposes of evaluation and an increased use of performance-results oriented and formative evaluations. (SLD)

The technology and welding joint properties of hybrid laser-tig welding on thick plate

Science.gov (United States)

Shenghai, Zhang; Yifu, Shen; Huijuan, Qiu

2013-06-01

The technologies of autogenous laser welding and hybrid laser-TIG welding are used on thick plate of high strength lower alloy structural steel 10CrNiMnMoV in this article. The unique advantages of hybrid laser-TIG welding is summarized by comparing and analyzing the process parameters and welding joints of autogenous laser welding laser welding and hybrid laser-TIG welding. With the optimal process parameters of hybrid welding, the good welding joint without visible flaws can be obtained and its mechanical properties are tested according to industry standards. The results show that the hybrid welding technology has certain advantages and possibility in welding thick plates. It can reduce the demands of laser power, and it is significant for lowering the aspect ratio of weld during hybrid welding, so the gas in the molten pool can rise and escape easily while welding thick plates. Therefore, the pores forming tendency decreases. At the same time, hybrid welding enhances welding speed, and optimizes the energy input. The transition and grain size of the microstructure of hybrid welding joint is better and its hardness is higher than base material. Furthermore, its tensile strength and impact toughness is as good as base material. Consequently, the hybrid welding joint can meet the industry needs completely.

Microstructural examination of Zr-2.5%Nb alloy welds made by pulsed Nd:YAG laser and TIG welding technique

International Nuclear Information System (INIS)

Bhatt, R.B.; Varma, P.V.S.; Panakkal, J.P.; Srivastava, D.; Dey, G.K.

2009-01-01

The paper describes the weld microstructure of Zr-2.5%Nb alloy material. Bead on plate welds were made using pulsed Nd:YAG laser and TIG welding technique at different parameters. These welds were characterized at macro and microstructural level. Weld pools of Pulsed Laser and TIG welds were not resolved by optical microscopy. SEM too did not reveal much. Orientation imaging microscopy could reveal the presence of fine martensite. It was observed that microstructure is very sensitive to welding parameters. Microhardness studies suggested formation of martensite in the weld pool. It was also observed that laser welds had very sharp weld pool boundary as compared to TIG welds. Variation in microhardness of the weldment is seen and is influenced by overlapping of weld spots causing thermal treatment of previously deposited spots. (author)

Lyden-af-Leg

DEFF Research Database (Denmark)

Toft, Herdis

Præsentation af seniorforsker-projekt Lyden-af-Leg i et traderingsperspektiv og med indledende fokus på YouTube som traderings-platform.......Præsentation af seniorforsker-projekt Lyden-af-Leg i et traderingsperspektiv og med indledende fokus på YouTube som traderings-platform....

Distribution of Argon Arc Contaminated with Nitrogen as Function of Frequency in Pulsed TIG Welding

Science.gov (United States)

Takahashi, Hiroki; Tanaka, Tatsuro; Yamamoto, Shinji; Iwao, Toru

2016-09-01

TIG arc welding is the high-quality and much applicable material joining technology. However, the current has to be small because the cathode melting should be prevented. In this case, the heat input to the welding pool becomes low, then, the welding defect sometimes occurs. The pulsed TIG arc welding is used to improve this disadvantage This welding can be controlled by some current parameters such as frequency However, few report has reported the distribution of argon arc contaminated with nitrogen It is important to prevent the contamination of nitrogen because the melting depth increases in order to prevent the welding defects. In this paper, the distribution of argon arc contaminated as function of frequency with nitrogen in pulsed TIG welding is elucidated. The nitrogen concentration, the radial flow velocity, the arc temperature were calculated using the EMTF simulation when the time reached at the base current. As a result, the nitrogen concentration into the arc became low with increasing the frequency The diffusion coefficient decreased because of the decrement of temperature over 4000 K. In this case, the nitrogen concentration became low near the anode. Therefore, the nitrogen concentration became low because the frequency is high.

Sundhedseffekter af luftforurening-beregningspriser

DEFF Research Database (Denmark)

Andersen, M. S.; Frohn, L. M.; Jensen, S. S.

Denne rapport afrapporterer det fortsatte arbejde med udvikling af miljøøkonomiske beregningspriser. På grundlag af EcoSense 4.0 fra ExternE-projektet, er der foretaget nye beregninger af eksternaliteter ved luftforurening med sundhedseffekter. Samtidig giver rapporten en vurdering af luftspredni......Denne rapport afrapporterer det fortsatte arbejde med udvikling af miljøøkonomiske beregningspriser. På grundlag af EcoSense 4.0 fra ExternE-projektet, er der foretaget nye beregninger af eksternaliteter ved luftforurening med sundhedseffekter. Samtidig giver rapporten en vurdering af...

Anvendelse af alternative isoleringsmaterialer

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2003-01-01

Resume af By og Byg Anvisning 207 om anvendelse af alternative isoleringsmaterialer, udarbejdet af Statens Byggeforskningsinstitut under udviklingsprogrammet "Miljø- og arbejdsmiljøvenlig isolering"......Resume af By og Byg Anvisning 207 om anvendelse af alternative isoleringsmaterialer, udarbejdet af Statens Byggeforskningsinstitut under udviklingsprogrammet "Miljø- og arbejdsmiljøvenlig isolering"...

Final Report of Project Curriculum Development: Pulsed Tig Welding, 1978-1979.

Science.gov (United States)

Atlantic County Area Vocational-Technical School, NJ.

Designed to help unemployed and disadvantaged workers find new career opportunities, this curriculum provides vocational students with a basic course of instruction in pulsed tungsten inert gas (TIG) welding. The first of four sections provides a general background of welding, the welding industry, and welding processes. Section 2 focuses on…

Soldagem de um aço inoxidável ferrítico com o processo A-TIG Ferritic stainless steel welding with the A-TIG process

Directory of Open Access Journals (Sweden)

Alessandra Gois Luciano de Azevedo

2009-03-01

Full Text Available O processo de soldagem TIG com fluxo (processo A-TIG apresenta como principal vantagem a possibilidade de se obter uma maior penetração do cordão de solda empregando os mesmos parâmetros de soldagem do processo TIG convencional. Diversos estudos mostram a influência dos fluxos ativos sobre as características geométricas das soldas em aços inoxidáveis austeníticos, porém pouco se sabe sobre a influência deste processo nas características geométricas e metalúrgicas de cordões de solda em aços inoxidáveis ferríticos. Neste trabalho são aplicados diferentes tipos de fluxo na soldagem de aço inoxidável ferrítico com o objetivo de verificar possíveis influências no perfil do cordão de solda, no seu aspecto visual, na microestrutura, na dureza da zona fundida e na resistência ao impacto (ensaio Charpy. As soldagens "bead-on-plate" foram realizadas sem metal de adição. Foram utilizados seis tipos de fluxo, sendo um óxido elaborado em laboratório (TiO2 e cinco fluxos comerciais. Os resultados mostraram que a utilização do fluxo permite um aumento na penetração com mudanças significativas no aspecto do cordão de solda. Verificou-se ainda que a microestrutura e a dureza do cordão de solda do aço estudado não foram afetadas pelo tipo de fluxo utilizado, com a microestrutura analisada em microscópio óptico. O aço em estudo mostrou um alto grau de fragilidade à temperatura ambiente.The A-TIG welding process presents as main advantage the possibility of increase in the penetration depth using the same parameters as conventional TIG welding. Many researchers show the influence of the active flux on the weld geometry in austenitic stainless steel, however little it is known of the influence of this process in the weld fillet shape and metallurgic characteristics of the weld fillet in ferritic stainless steel. In this work different types of flux are applied with the objective to verify possible influences on the weld

Beregning af nitratudvaskning

DEFF Research Database (Denmark)

Petersen, Jens; Petersen, Bjørn Molt; Blicher-Mathiesen, Gitte

2006-01-01

I forbindelse med kommunalreformen ønskes en ensartet forvaltning af reglerne for vurdering af virkninger på miljøet (VVM) ved ansøgninger om udvidelse af husdyrbrug, herunder beregning af nitratudvaskningen. Rapporten foreslår et beregningskoncept, der bygger på den ansøgende bedrifts samlede kv...

Identifikation af referencevandløb til implementering af vandrammedirektivet i Danmark

DEFF Research Database (Denmark)

Kristensen, Esben Astrup; Baattrup-Pedersen, Annette; Skriver, Jens

Definition og beskrivelse af referencetilstanden er centralt for implementering af vandrammedirektivet, da bedømmelse af den økologiske tilstand sker som afvigelsen fra den upåvirkede referencetilstand. I denne rapport præsenteres analyser af danske, udenlandske og historiske data med det formål...

Restaurering af Skjern Å

DEFF Research Database (Denmark)

Jessen, K.; Boysen Larsen, B.; Bundgaard, P.

Denne rapport indeholder resultaterne af den natur- og miljøovervågning, der blev iværksat som en del af naturgenopretningen af Skjern Å 1999-2002. Ved projektet ophørte den kunstige afvanding af den vestlige del af Skjern Å dalen. Størstedelen af de dyrkede arealer ændredes til ekstensive græsni...

Relevansen af Aristoteles' etik for konceptionen af eksistentiel terapi

DEFF Research Database (Denmark)

Dræby, Anders

Siden sin undfangelse i begyndelsen af det 20. århundrede har den eksistentielle terapi repræsenteret et filosofisk funderet alternativ til de former for terapeutisk praksis, der er funderet i den funktionalistiske medicinske metafysik. Anvendelse af elementer fra Aristoteles' etik muliggør en...... fremhævelse af den eksistentielle terapi som en praktisk eksistensfænomenologisk livskunst, hvis anliggende er en frembringelse af det enkelte menneskes muligheder fra det skjulte og ind i det uskjulte, så mennesket viser sig som det er ved sig selv...

Om distributionen af hvidhed

DEFF Research Database (Denmark)

Frello, Birgitta

2007-01-01

Med udgangspunkt i John Fords Western, Forfølgeren fra 1956, præsenteres en analyse af repræsentationer af race og overskridelse af raceskel, særligt i relation til konstitueringen af subjektpositioner, hvorfra spørgsmål om hvidhed og ikke-hvidhed kan afgøres.......Med udgangspunkt i John Fords Western, Forfølgeren fra 1956, præsenteres en analyse af repræsentationer af race og overskridelse af raceskel, særligt i relation til konstitueringen af subjektpositioner, hvorfra spørgsmål om hvidhed og ikke-hvidhed kan afgøres....

Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments

Energy Technology Data Exchange (ETDEWEB)

Kumar, A. [Department of Mechanical Engineering, National Institute of Technology, Warangal 506 004 (India)], E-mail: adepu_kumar7@yahoo.co.in; Sundarrajan, S. [Scientist ' G' , Defence Research and Development Laboratory, Hyderabad 500 028 (India)

2009-04-15

The present work pertains to the improvement of mechanical properties of AA 5456 Aluminum alloy welds through pulsed tungsten inert gas (TIG) welding process. Taguchi method was employed to optimize the pulsed TIG welding process parameters of AA 5456 Aluminum alloy welds for increasing the mechanical properties. Regression models were developed. Analysis of variance was employed to check the adequacy of the developed models. The effect of planishing on mechanical properties was also studied and observed that there was improvement in mechanical properties. Microstructures of all the welds were studied and correlated with the mechanical properties.

Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments

International Nuclear Information System (INIS)

Kumar, A.; Sundarrajan, S.

2009-01-01

The present work pertains to the improvement of mechanical properties of AA 5456 Aluminum alloy welds through pulsed tungsten inert gas (TIG) welding process. Taguchi method was employed to optimize the pulsed TIG welding process parameters of AA 5456 Aluminum alloy welds for increasing the mechanical properties. Regression models were developed. Analysis of variance was employed to check the adequacy of the developed models. The effect of planishing on mechanical properties was also studied and observed that there was improvement in mechanical properties. Microstructures of all the welds were studied and correlated with the mechanical properties

Energirenovering af Traneparken

DEFF Research Database (Denmark)

Rose, Jørgen; Thomsen, Kirsten Engelund; Mørck, Ove

Nærværende rapport udgør en del af afrapporteringen af PSO ELFORSK projektet Vejledning for energirenovering af boligblokke til lavenergiklasse 2015 og 2020. Arbejdet har været finansieret af PSO midler via ELFORSK, projekt: 347-023. Formålet med projektet er at udvikle en vejledning for dybtgående...

Om Hegels opfattelse af Gorgias, set på baggrund af tidligere filosofihistorikeres fremstilling

DEFF Research Database (Denmark)

Huggler, Jørgen

2010-01-01

En undersøgelse af Hegels tolkning af sofisten Gorgias giver anledning til at se på receptionen af sofisterne hos notable filosofihistorikere i det 18. århundrede. En sådan undersøgelse viser, at Hegel har en original og velvillig tolkning af sofisterne koncentreret omkring begrebet Bildung og det...... at give grunde for noget. Hegels udlægning af Gorgias bygger på hans tolkning af eleaterne, især af Zenon. Når Hegel har en særlig tolkning af eleaterne, skyldes det hans egne mangeårige filosofiske bestræbelser, og en identificering af en særlig, immanent objektiv dialektik hos Zenon, som han finder......, at Gorgias fører videre. Hegels filosofiske forståelse er tilstrækkelig udviklet til at kunne knytte positive kommentarer til alle dele af diskussionen i Gorgias' ræsonnement Om det ikkeværende, eller Om naturen. Det lykkes dog bedst i forhold til de to første af Gorgias' tre underteser. I hegelsk perspektiv...

Microstructure and corrosive wear resistance of plasma sprayed Ni-based coatings after TIG remelting

Science.gov (United States)

Tianshun, Dong; Xiukai, Zhou; Guolu, Li; Li, Liu; Ran, Wang

2018-02-01

Ni based coatings were prepared on steel substrate by means of plasma spraying, and were remelted by TIG (tungsten inert gas arc) method subsequently. The microstructure, microhardness, electrochemical corrosion and corrosive wear resistance under PH = 4, PH = 7 and PH = 10 conditions of the coatings before and after remelting were investigated. The results showed that the TIG remelting obviously reduced the defects and dramatically decreased the coating’s porosity from 7.2% to 0.4%. Metallurgical bonding between the remelted coating and substrate was achieved. Meanwhile, the phase compositions of as-sprayed coating were γ-Ni, Mn5Si2 and Cr2B, while the phase compositions of the remelting coating were Fe3Ni, Cr23C6, Cr2B and Mn5Si2. The microhardness of the coating decreased from 724 HV to 608 HV, but the fracture toughness enhanced from 2.80 MPa m1/2 to 197.3 MPa m1/2 after remelting. After corrosive wear test, the average wear weight loss and 3D morphology of wear scar of two coatings indicated that the wear resistance of the remelted coating was remarkably higher than that of as-sprayed coating. Therefore, TIG remelting treatment was a feasible method to improve the coating’s microstructure and enhance its corrosive wear resistance.

Ensretning af historieundervisningen

DEFF Research Database (Denmark)

Rønhede, Søren

2008-01-01

"Det er ikke kun i Putins Rusland, at statsmagten vil dirigere historieundervisningen." (Politiken havde fokuseret på "ensretning af historieundervisningen" i Rusland) "Kanonen fra 2006 er undfanget af Udvalget til Styrkelse af Historie i Folkeskolen. Dette udvalg havde regeringen nedsat; men bid...... bidrager kanonen til faglig styrkelse?" spørges der. Det vises, at flere kanonpunkter ikke er fagligt funderede, men af mytologisk art....

Analysis of the Corrosion Behavior of an A-TIG Welded SS 409 Weld Fusion Zone

Science.gov (United States)

Vidyarthy, R. S.; Dwivedi, D. K.

2017-11-01

AISI 409 (SS 409) ferritic stainless steel is generally used as the thick gauge section in freight train wagons, in ocean containers, and in sugar refinery equipment. Activating the flux tungsten inert gas (A-TIG) welding process can reduce the welding cost during fabrication of thick sections. However, corrosion behavior of the A-TIG weld fusion zone is a prime concern for this type of steel. In the present work, the effect of the A-TIG welding process parameters on the corrosion behavior of a weld fusion zone made of 8-mm-thick AISI 409 ferritic stainless-steel plate has been analyzed. Potentiodynamic polarization tests were performed to evaluate the corrosion behavior. The maximum corrosion potential ( E corr) was shown by the weld made using a welding current of 215 A, a welding speed of 95 mm/min, and a flux coating density of 0.81 mg/cm2. The minimum E corr was observed in the weld made using a welding current of 190 A, a welding speed of 120 mm/min, and a flux coating density of 1.40 mg/cm2. The current study also presents the inclusive microstructure-corrosion property relationships using the collective techniques of scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffraction.

TIG welding of 22-05 duplex stainless steels (Uranus 45 N and Avesta). Microstructural studies and mechanical properties

International Nuclear Information System (INIS)

Gomez de Salazar, J.M.; Urena, A.; Cobollo, M.; Barranco, V.; Alvarez, M.J.

1998-01-01

TIG welding of two different duplex stainless steels is carried out. Are-discharge on base-material plates by means of the TIG technique without filler metal and varying the energetic conditions (E.N.A.) has been performed. A comparative study concerning the microstructural evolution as well as mechanical properties is carried out. The relation between hardness profiles, the microstructural variations and the ferrite δ concentration is established. Further, the above mentioned properties are related to the E.N.A. for each welded joint. (Author) 8 refs

Optimering af byggeprocessen via bedre/forøget brug af digitale modeller

DEFF Research Database (Denmark)

Carlsen, Mads; Grøn, Dorte Marie Frilund; Alon, Nevo

2013-01-01

Projektet klarlægger nødvendigheden for, og muligheder i, en struktureret og konsekvent planlægning ved anvendelsen af BIM i relation til projektering, udførelse og drift af byggeri. Der er udarbejdet et planlægningsværktøj, der muliggør en sådan planlægning. Samtidig kortlægges de nødvendige data......, der kan udtrækkes af en BIM model ved gennemførelsen af en LCA simulering. Projektet afsluttes med en præsentation af en udviklet demonstratorapplikation til gennemførelse af LCA simuleringer koblet med BIM modellen....

Mechanical Properties of Steel P92 Welded Joints Obtained By TIG Technology

Science.gov (United States)

Mohyla, P.; Havelka, L.; Schmidová, E.; Vontorová, J.

2017-11-01

Mechanical properties of P92 steel welded joints obtained using the TIG (141) technology have been studied upon post-welding heat treatment (PWHT). The microhardness, tensile strength, and impact toughness of metal in the weld and heat-affected zone are determined. The PWHT is shown to be obligatory.

Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc

International Nuclear Information System (INIS)

Zhang, Guangjun; Xiong, Jun; Gao, Hongming; Wu, Lin

2012-01-01

The twin-electrode TIG coupling arc is a new type of welding heat source, which is generated in a single welding torch that has two tungsten electrodes insulated from each other. This paper aims at determining the distribution of temperature for the coupling arc using the Fowler–Milne method under the assumption of local thermodynamic equilibrium. The influences of welding current, arc length, and distance between both electrode tips on temperature distribution of the coupling arc were analyzed. Based on the results, a better understanding of the twin-electrode TIG welding process was obtained. -- Highlights: ► Increasing arc current will increase the coupling arc temperature. ► Arc length seldom affects the peak temperature of the coupling arc. ► Increasing arc length will increase the extension of temperature near the anode. ► Increasing distance will decrease temperatures in the central part of the arc.

Styring af kommunal digitalisering

DEFF Research Database (Denmark)

Jæger, Birgit

2017-01-01

Digitalisering af både interne arbejdsprocesser og kommunikation med borgere og virksomheder har længe været en vigtig faktor i moderniseringen af den offentlige sektor. Derfor er der stort fokus på styring af digitaliseringen. Denne artikel undersøger, dels hvordan digitaliseringen i den kommunale...... sektor styres, og dels hvilke styringsparadigmer der kan identificeres. Med udgangspunkt i en konkret kommune analyseres styringen af digitalisering gennem et hierarki af offentlige digitaliseringsstrategier. Gennem udvikling af en helt ny form for organisering, en såkaldt Digitaliseringsforening...

The effect of pretreatment, welding technique and filter alloys in TIG welding of AlLiCu alloys. Pt. 2

International Nuclear Information System (INIS)

Krueger, U.; Neye, G.

1989-01-01

Previous publications on TIG welding on recently developed AlLiCu alloys point to unsatisfactory results if one proceeds in the usual way. In this report, the conditions are shown for producing welds with few pores with the aid of TIG welding using usual production methods. After reporting on investigations with argon as the cover gas in the first part of the report, this part is concerned with experiments in which helium was used as the cover gas. (orig.) [de

Livscyklusvurdering af basiskemikalier

DEFF Research Database (Denmark)

Olsen, Stig Irving

1998-01-01

Dette resumé af metoder og væsentlige erfaringer fra erhvervsforskerprojektet Livscyklusvurdering af basiskemikalier er skrevet i erkendelse af, at hovedrapporten er for omfattende til en hurtig introduktion i problemstillingerne. Formålet med denne rapport er derfor at give et kort overblik over...

Globalisering af uddannelse

DEFF Research Database (Denmark)

Jensen, Henning Høgh

2005-01-01

Det globale marked for uddannelse er i voldsom vækst og er ved at blive et af Danmarks vigtigste vareområder. Hvorledes kan KVL agere i globaliseringen af uddannelse for at sikre en høj kvalitet af egne kandidater med gode jobmuligheder?...

Undervisning af tosprogede elever

DEFF Research Database (Denmark)

Horst, Christian

2003-01-01

Artiklen fremdrager hovedresultaterne fra Virginia P. Collier's og Wayne P. Thomas's længdeundersøgelser af tosprogede elever i USA, som formentlig er de mest omfattende undersøgelser af undervisningen af tosprogede elever overhovedet. Resultaterne diskuteres i relation til udviklingen af en...

Prediction of the weld pool geometry of TIG arc welding by using ...

African Journals Online (AJOL)

Prediction of the weld pool geometry of TIG arc welding by using fuzzy logic controller. ... The experimental data were then used for building a fuzzy logic model to predict the effects of control factors on the responses. A graphical mapping scheme was employed for the graphical representation of the macrostructure zones' ...

6 belysninger af vejledning

DEFF Research Database (Denmark)

Toft, Helle Mary; Jessing, Carla Tønder; Nymann, Anette

Artiklerne belyser vejledning af unge og vejledning af voksne. I relation til unge drejer det sig om: 1. vejledning af unge med vanskeligheder i forhold til uddannelse - her unge med særlige vejledningsbehov, og mentorordninger for unge, og 2. vejledning af unge i ungdomsuddannelser og i erhvervs...

Brug af alternativ isolering i forbindelse med renovering af ældre etageejendomme

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2003-01-01

Resume af rapport om praktiske erfaringer med brug af alternative isoleringsmaterialer i en renoveringsopgave, udarbejdet af Byfornyelse København m.fl. under Energistyrelsens udviklingsprogram "Miljø- og arbejdsmiljøvenlig isolering"...

Evaluation the Mechanical Properties of Shot Peened TIG Welded Aluminum Sheets

Directory of Open Access Journals (Sweden)

Ahmed Ameed Zain Al-Abideen

2017-04-01

Full Text Available A tungsten inert gas (TIG welding is one of the most popular kinds of welding used to join metals mainly for aluminum alloys. However, many challenges may be met with this kind of joining process; these challenges arise from decay of mechanical properties of welded materials. In the present study, an attempt was made to enhancing the mechanical properties of TIG weld joint of 6061-T6 aluminum alloy by hardening the surfaces using shoot peening technique. To optimize the shoot peening process three times of exposure (5, 10, and 15 min. was used. All peened and unpeened, and welded and unwelded samples were characterized by metallographic test to indicate the phase transformation and modification in microstructure occurring during welding process. Tensile test and Vickers micro-hardness measurements were performed for all samples to investigate the effect of shoot peening on mechanical properties of welded aluminum. The results indicated a significant improvement in properties for peened welded and unwelded samples compared with those unpeened one. Also, the results showed that the tensile and microhardness properties were increased with increasing the time of exposure to 15 min. due to generation of compressive residual stresses at surface.

Behandling af elmesyge

DEFF Research Database (Denmark)

Thomsen, Iben Margrete; Kristoffersen, Palle

2004-01-01

Ingen midler er p.t. godkendt og dermed lovlige til bekæmpelse af elmesyge i Danmark. Lovprisning af nye behandlinger ses f.eks. på internettet, men dokumentation mangler. Økonomien og nytten ved en kemisk bekæmpelse frem for sanering af syge træer skal afvejes nøje....

Energirenovering af Sems Have

DEFF Research Database (Denmark)

Jensen, Søren Østergaard; Rose, Jørgen; Mørck, Ove

Nærværende rapport udgør en del af afrapporteringen af PSO ELFORSK projektet Vejledning for energirenovering af boligblokke til lavenergiklasse 2015 og 2020. Arbejdet har været finansieret af PSO midler via ELFORSK, projekt: 347-023. Formålet med projektet er at udvikle en vejledning for dybtgående...

Midler til lindring af mundtørhed og stimulation af spytsekretion

DEFF Research Database (Denmark)

Dynesen, Anja Weirsøe; Pedersen, Anne Marie Lynge; Jensen, Allan Bardow

2013-01-01

effekt. I relation til risikoen for at udvikle caries, der er forhøjet hos den mundtørre patient, er det dog væsentligt at anbefale produkter uden sukker. Ligesom produktets indhold af syre og dermed det erosive potentiale er af betydning i forhold til udviklingen af dentale erosioner. Systemisk...

Af Upraktiske Grunde

DEFF Research Database (Denmark)

Vaaben, Nana Katrine

2001-01-01

som både Claude Levi-Strauss lægger op til i sine klassiske studier af "den vilde tanke", og som Jean Baudrillard siden har lagt op til i sine analyser af samlere som en slags ekstreme forbrugere, der er i færd med at komplettere deres identitet gennem besiddelser af genstande. Imidlertid tillægger...

Ledelse af projektmyldret

DEFF Research Database (Denmark)

større arbejdsgrupper, og det kan være selvorganiserede store udviklingsprogrammer. Et projekt kører sjældent alene, og derfor er der ikke kun tale om projektledelse, men i lige så høj grad om ledelse af projekter. Ledelse af virksomhedens mylder af projekter er ikke let, og forfatterne gennemgår derfor...

Evaluering af ordning med psykologbehandling af personer med let til moderat depression

DEFF Research Database (Denmark)

Fjeldsted, Rita; Christensen, Kaj Sparle

Herværende rapport evaluerer den pr. 1.4.2008 indførte ordning med mulighed for henvisning til psykologbehandling med 60 % tilskud for patienter med let til moderat depression. Evalueringen har betjent sig af flere gensidigt supplerende metoder: spørgeskemaundersøgelser overfor patienter, psykolo......Herværende rapport evaluerer den pr. 1.4.2008 indførte ordning med mulighed for henvisning til psykologbehandling med 60 % tilskud for patienter med let til moderat depression. Evalueringen har betjent sig af flere gensidigt supplerende metoder: spørgeskemaundersøgelser overfor patienter...... tidligere evaluering af forsøgsordning af psykologbehandling af depression i perioden 2005-06. 18.419 personer i alderen 18-37 år blev henvist til psykolog i den undersøgte ordning i perioden 1.2.2009 – 31.1.2010, svarende til en henvisningshyppighed på 1,6 % af baggrundsbefolkningen i samme aldersgruppe....... Ordningen giver mulighed for én rehenvisning, og 9 % blev rehenvist i perioden. Spørgeskemaresultater viser, at kun 33 % af de henviste falder ind under henvisningskriteriet ” let til moderat depression” på tidspunktet for opstart af psykologbehandling, 39 % har ingen tegn på depression, og 28 % har svær...

Numerical simulation of TIG welding with filler of steel pieces of high thickness

Energy Technology Data Exchange (ETDEWEB)

Carmignani, B.; Toselli, G. [ENEA Centro Ricerche Ezio Clementel, Bologna (Italy). Dipt. Innovazione

1999-07-01

The problem of the numerical simulation of welding process with filler, in particular TIG (tungsten inert gas) with cold filler, has been approached with ABAQUS/S code. Reference has been made to some experimental models studied and prepared ad hoc in order to better know the physical phenomena involved in the TIG welding technique and to validate the computation methodologies and results obtained. This numerical simulation has been required in order to assist the fabrication development and QA for TF (toroidal field) coil case, an important component of ITER (international thermonuclear experimental reactor) machine. [Italian] Con il codice di analisi termo-strutturale non lineare agli EF, ABAQUS/S, viene affrontato per la prima volta il problema della simulazione numerica di un processo di saldatura con materiale d'apporto, in particolare il processo di saldatura TIG (tungsten inert gas) a filo freddo. Si e' fatto riferimento ad alcuni modelli sperimentali studiati e preparati ad hoc per conoscere meglio e valutare le metodologie di calcolo adottate ed i corrispondenti risultati ottenuti. Questo tipo di simulazione e' stato richiesto per fornire alcune conoscenze preliminari, che potessero essere di aiuto e guida nelle scelte di saldatura da eseguire per la fabbricazione e la quality assurance delle casse che dovranno contenere le bobine per la creazione del campo magnetico toroidale nella macchina ITER (international thermonuclear experiemental reactor) per la fusione nucleare. In questo lavoro, sono presentati, analizzati, discussi e confrontati con le corrispondenti misure sperimentali i primi risultati ottenuti. Sono descritte e discusse anche le difficolta' incontrate, le approssimazioni fatte e la ricerca di procedure di calcolo piu' semplificate.

Evaluering af metoder til risikovurdering af kombinationseffekter og etablering af PBTK/TD modeller for pesticider - et ph.d.-projekt

DEFF Research Database (Denmark)

Reffstrup, Trine Klein

2012-01-01

I dette ph.d.-projekt ved DTU Fødevareinstituttet er den nuværende viden om metoder til risikovurdering af kombinationseffekter af kemiske stoffer med fokus på pesticider gennemgået. Endvidere undersøgtes, hvordan man kan implementere matematiske computermodeller som et værktøj i vurderingen af...

Snit af målinger: VK afhængig af DF og NA

DEFF Research Database (Denmark)

Thomsen, Søren Risbjerg

2007-01-01

ANALYSE: Ekstra Risbjerg-snit af meningsmålinger grundet fortsat valgrummel - VK-regeringen vil blive afhængig af både DF og NA. Udgivelsesdato: 21. august 2007......ANALYSE: Ekstra Risbjerg-snit af meningsmålinger grundet fortsat valgrummel - VK-regeringen vil blive afhængig af både DF og NA. Udgivelsesdato: 21. august 2007...

Optimering af model for spredning af luftforurening

DEFF Research Database (Denmark)

Pedersen, Jens Christian

2008-01-01

De nuværende luftforureningsmodeller har problemer med at bevare massen af diverse kemiske stoffer og med at der ind i mellem optræder negative værdier. Derfor arbejder specialestuderende Ayoe Buus Hansen på om at forbedre den model DMU bruger til at beskrive transport og spredning af luftforuren...... luftforurening på alle skalaer på den nordlige halvkugle ved at sammenligne tre alternative beregningsmodeller. ...

A Study to Increase Weld Penetration in P91 Steel During TIG Welding by using Activating Fluxes

Science.gov (United States)

Singh, Akhilesh Kumar; Kumar, Mayank; Dey, Vidyut; Naresh Rai, Ram

2017-08-01

Activated Flux TIG (ATIG) welding is a unique joining process, invented at Paton Institute of electric welding in 1960. ATIG welding process is also known as flux zoned TIG (FZTIG). In this process, a thin layer of activating flux is applied along the line on the surface of the material where the welding is to be carries out. The ATIG process aids to increase the weld penetration in thick materials. Activating fluxes used in the literature show the use of oxides like TiO2, SiO2, Cr2O3, ZnO, CaO, Fe2O3, and MnO2 during welding of steels. In the present study, ATIG was carried out on P-91 steel. Though, Tungsten Inert Gas welding gives excellent quality welds, but the penetration obtained in such welding is still demanding. P91 steel which is ferritic steel is used in high temperature applications. As this steel is, generally, used in thick sections, fabrication of such structures with TIG welding is limited, due to its low depth of penetration. To increase the depth of penetration in P91while welding with ATIG, the role of various oxides were investigated. Apart from the oxides mentioned above, in the present study the role of B2O3, V2O5 and MgO, during ATIG welding of P91 was investigated. It was seen that, compared to TIG welding, there was phenomenal increase in weld penetration during ATIG welding. Amongst all the oxides used in this study, maximum penetration was achieved in case of B2O3. The measurements of weld penetration, bead width and heat affected zone of the weldings were carried out using an image analysis technique.

Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750

Energy Technology Data Exchange (ETDEWEB)

Ramkumar, K. Devendranath, E-mail: ramdevendranath@gmail.com; Ramanand, R.; Ameer, Ajmal; Simon, K. Aghil; Arivazhagan, N.

2016-03-21

This study addresses the effect of post weld heat treatment on the fusion zone microstructure and the mechanical properties of activated flux tungsten inert gas (A-TIG) weldments of Inconel X750. In this study, a compound flux of 50% SiO{sub 2}+50% MoO{sub 3} was used for A-TIG welding of the samples. Comparative studies on the microstructure and mechanical properties have been made on the weldments both in the as-welded and post weld heat treated conditions. Direct ageing post weld heat treatment (PWHT) was carried out at 705 °C for 22 h on the A-TIG weldment to assess the structure–property relationships. It was inferred that direct ageing post weld heat treatment resulted in better tensile strength (1142 MPa) compared to the as-welded coupons (736 MPa). The joint efficiencies of the as-welded and post weld heat treated conditions were found to be 60.7% and 94.07% respectively. The impact toughness of the as-welded coupons were found to be greater than the post weld heat treated samples; however the impact toughness of the welds are greater than the parent metal employed in both the cases. This study also attested the detailed structure–property relationships of A-TIG weldments using the combined techniques of optical and scanning electron microscopy, Electron Dispersive X-ray Analysis (EDAX) techniques.

Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750

International Nuclear Information System (INIS)

Ramkumar, K. Devendranath; Ramanand, R.; Ameer, Ajmal; Simon, K. Aghil; Arivazhagan, N.

2016-01-01

This study addresses the effect of post weld heat treatment on the fusion zone microstructure and the mechanical properties of activated flux tungsten inert gas (A-TIG) weldments of Inconel X750. In this study, a compound flux of 50% SiO_2+50% MoO_3 was used for A-TIG welding of the samples. Comparative studies on the microstructure and mechanical properties have been made on the weldments both in the as-welded and post weld heat treated conditions. Direct ageing post weld heat treatment (PWHT) was carried out at 705 °C for 22 h on the A-TIG weldment to assess the structure–property relationships. It was inferred that direct ageing post weld heat treatment resulted in better tensile strength (1142 MPa) compared to the as-welded coupons (736 MPa). The joint efficiencies of the as-welded and post weld heat treated conditions were found to be 60.7% and 94.07% respectively. The impact toughness of the as-welded coupons were found to be greater than the post weld heat treated samples; however the impact toughness of the welds are greater than the parent metal employed in both the cases. This study also attested the detailed structure–property relationships of A-TIG weldments using the combined techniques of optical and scanning electron microscopy, Electron Dispersive X-ray Analysis (EDAX) techniques.

En verden af medier

DEFF Research Database (Denmark)

Tække, Jesper

2009-01-01

Bogen: 'En verden af medier – Medialiseringen af politik, sprog, religion og leg' anmeldes. Anmeldelsen kan læses på: http://ojs.statsbiblioteket.dk/index.php/mediekultur/article/view/1370/1499 Udgivelsesdato: 2009......Bogen: 'En verden af medier – Medialiseringen af politik, sprog, religion og leg' anmeldes. Anmeldelsen kan læses på: http://ojs.statsbiblioteket.dk/index.php/mediekultur/article/view/1370/1499 Udgivelsesdato: 2009...

Udforskning af journalistiske moralnormer

DEFF Research Database (Denmark)

Mogensen, Kirsten

2010-01-01

Kirsten Mogensen beskriver professionelle journalistiske normer. Med udgangspunkt i amerikansk tv's dækning af begivenhederne 11. september kombinerer Kirsten Mogensen kvalitative interviews og tekstanalyse for på den måde at beskrive professionelle journalistiske normer. Metoden er en kombinatio...... af halvstrukturerede, udforskende interviews med både kvantitative og kvalitative analyser af den faktiske dækning, og er primært udledt af Alf Ross' essay om normer og direktiver....

Pilotprojekt - In situ test af stimuleret aerob nedbrydning til oprensning af pesticidpunktkilder

DEFF Research Database (Denmark)

Tsitonaki, Katerina; Roost, Sandra; Larsen, Lars

Denne rapport omhandler et pilotforsøg i felten, hvor det er undersøgt, hvorvidt aerob nedbrydning af phenoxysyre-pesticider kan stimuleres ved tilsætning af ilt suppleret med tilsætning af specifikke pesticidnedbrydende bakterier. Forsøget er udført på en forurenet lokalitet, Skelstofte, hvor der...

Mechanical properties of TIG and EB weld joints of F82H

Energy Technology Data Exchange (ETDEWEB)

Hirose, Takanori, E-mail: hirose.takanori@jaea.go.jp; Sakasegawa, Hideo; Nakajima, Motoki; Tanigawa, Hiroyasu

2015-10-15

Highlights: • Narrow groove TIG minimized volume of F82H weld. • Mechanical properties of TIG and EB welds of F82H have been characterized. • Post weld heat treatment successfully moderate the toughness of weld metal without softening the base metal. - Abstract: This work investigates mechanical properties of weld joints of a reduced activation ferritic/martensitic steel, F82H and effects of post weld heat treatment on the welds. Vickers hardness, tensile and Charpy impact tests were conducted on F82H weld joints prepared using tungsten-inert-gas and electron beam after various heat treatments. Although narrow groove tungsten-inert-gas welding reduced volume of weld bead, significant embrittlement was observed in a heat affected zone transformed due to heat input. Post weld heat treatment above 993 K successfully moderated the brittle transformed region. The hardness of the brittle region strongly depends on the heat treatment temperature. Meanwhile, strength of base metal was slightly reduced by the treatment at temperature ranging from 993 to 1053 K. Moreover, softening due to double welding was observed only in the weld metal, but negligible in base metal.

Microstructure and Wear Resistance of TIG Remelted NiCrBSi Thick Coatings

Directory of Open Access Journals (Sweden)

Guo-lu Li

2018-01-01

Full Text Available The self-fluxing NiCrBSi coatings with 800 μm thickness were prepared on the surface of AISI1045 steel substrate by plasma spraying. And the remelted coating was obtained using by the tungsten inert gas (TIG arc process. The microstructure, surface roughness, hardness, phase composition, and wear resistance of the sprayed coating and remelted coating were systematically investigated. The results demonstrate that TIG remelted treatment can significantly eliminate the microscopic defects in thick coating and improve its density. The surface roughness (Ra of the remelted coating is only 18.9% of the sprayed coating. The hardness of the remelted coating is 26.8% higher than that of the sprayed coating. The main phases in the sprayed coating are changed from γ-Ni, Cr7C3, and Cr2B to γ-Ni, Cr23C6, CrB, Ni3B, and Fe3C. The wear mass loss of the remelted coating is only 17.1% of the sprayed coating. Therefore, a Ni-based thick coating with good wear resistance can be obtained by plasma spraying and remelted technique.

Neutron and synchrotron measurements of residual strain in TIG welded aluminium alloy 2024

International Nuclear Information System (INIS)

Owen, R.A.; Preston, R.V.; Withers, P.J.; Shercliff, H.R.; Webster, P.J.

2003-01-01

Tungsten inert gas (TIG) welding is one method of joining aluminium alloys with potential application in the aerospace industry. However, for it to be seriously considered as an alternative to mechanical fasteners the interrelated problems of residual stress and distortion need to be addressed. In this paper neutron, laboratory and synchrotron X-ray diffraction methods are used to provide non-destructive information about the residual stress field in TIG-welded 2024 Al alloy. The results compare well despite the differing penetration and sampling volumes associated with each technique. It is found that the magnitudes of the tensile longitudinal stresses decrease along the plate due to progressive heating up of the plate ahead of the arc during welding, so that steady-state conditions are not achieved. Comparison of the data with a finite element model indicates that softening of the heat-affected region must be included to simulate the resulting stress field. The FE model is found to be in good agreement with the data especially in the vicinity of the weld slope-out

Intelligent styring af dynamisk LED belysning

DEFF Research Database (Denmark)

Thorseth, Anders; Corell, Dennis Dan; Hansen, Søren Stentoft

Denne slutrapport giver en kort beskrivelse af arbejdet, der er udført af DTU Fotonik i projektet ”Intelligent styring af dynamisk LED belysning” støttet af EUDP. Arbejdet er udført i perioden 2011‐2012 i samarbejde med Lighten.......Denne slutrapport giver en kort beskrivelse af arbejdet, der er udført af DTU Fotonik i projektet ”Intelligent styring af dynamisk LED belysning” støttet af EUDP. Arbejdet er udført i perioden 2011‐2012 i samarbejde med Lighten....

Evaluering af afdeling H

DEFF Research Database (Denmark)

Kjær Minke, Linda; Birkmose, Sofie Meldal

2016-01-01

Som led i Kriminalforsorgens flerårsaftale 2013-2016 blev det åbne statsfængsel Søbysøgård i januar 2015 udvidet med 42 lukkede pladser i den nybyggede afdeling H. Nærværende evaluering kortlægger de erfaringer personalet og indsatte har gjort sig i løbet af det første år. Etableringen af den...... lukkede fængselsafdeling H giver en unik mulighed for at følge henholdsvis hvilke faktorer, der bidrager til udvikling af fængselskultur, og hvordan de respektive faktorer influerer på udvikling af fængselskulturen. Evalueringens metoder består af kvalitative og kvantitative metoder såsom dokumentanalyse...

Overførsel af viden ved flytning af produktion

DEFF Research Database (Denmark)

Madsen, Erik Skov; Riis, Jens Ove; Wæhrens, Brian Vejrum

2010-01-01

Empiriske studier i tre industrielle virksomheder har afsløret, at selv virksomheder med mange års erfaring i at overføre produktion til andre lande hovedsagelig fokuserer på planlægning af den fysiske overflytning af produktionsudstyr og fokuserer på den eksplicitte viden, der er tilknyttet prod...

Evaluation of the TIG welding mechanical behavior in AISI 316 tubes for fuel rods

International Nuclear Information System (INIS)

Bittencourt, M.S.Q.; Carvalho Perdigao, S. de

1985-10-01

The effect of service temperature, the mechanical resistance and the creep behaviour of a steel which is intendend to be used as fuel rods in Nuclear Reactors was investigated. The tests were performed in seamless tubes of austenitic stainless steel, AISI 316, 20% cold worked, TIG welded. (Author) [pt

Test af Software

DEFF Research Database (Denmark)

Dette dokument udgør slutrapporten for netværkssamarbejdet ”Testnet”, som er udført i perioden 1.4.2006 til 31.12.2008. Netværket beskæftiger sig navnlig med emner inden for test af indlejret og teknisk software, men et antal eksempler på problemstillinger og løsninger forbundet med test af...... administrativ software indgår også. Rapporten er opdelt i følgende 3 dele: Overblik. Her giver vi et resumé af netværkets formål, aktiviteter og resultater. State of the art af software test ridses op. Vi omtaler, at CISS og netværket tager nye tiltag. Netværket. Formål, deltagere og behandlede emner på ti...

Soldagem TIG de elevada produtividade: influência dos gases de proteção na velocidade limite para formação de defeitos High productivity TIG welding: influence of shielding gases on the limit speed for defect formation

Directory of Open Access Journals (Sweden)

Mateus Barancelli Schwedersky

2011-12-01

Full Text Available O processo TIG, em configurações tradicionais, apresenta problemas quando utilizado de maneira autógena com elevadas corrente e velocidade de soldagem. Nessa condição, normalmente ocorrem defeitos no cordão, principalmente descontinuidades denominadas humping. Em estudo realizado no LABSOLDA, foram obtidas soldas de excelente qualidade com o processo TIG atingindo velocidades de 1,5 m/min. Este procedimento, utilizando na proteção misturas argônio-hidrogênio, possibilitou velocidade semelhante ao processo MIG/MAG convencional, com a vantagem de ser realizada sem material de adição. O presente trabalho tem o objetivo de fornecer subsídios para uma nova análise da formação dos defeitos na soldagem TIG de elevada produtividade, já que a teoria baseada na pressão do arco não contempla totalmente o que tem sido observado na prática. Foram realizados ensaios com diferentes correntes utilizando argônio, hélio e misturas argônio-hidrogênio no gás de proteção. Os resultados mostram que para a mesma corrente média, à medida que o teor de H2 foi aumentado, ocorreram também gradativos aumentos da área fundida e eficiência de fusão. Foi possível mostrar indícios de que o mecanismo de formação de defeitos não depende somente da pressão do arco, mas sim do balanço entre pressão do arco e quantidade de metal fundido, que é dependente da eficiência de fusão proporcionada pelo gás utilizado.Under usual configurations, the TIG process presents problems when used autogenously with high current and welding speed. In this condition defects in the weld bead usually occur, especially discontinuities called humping. In a study conducted at LABSOLDA, welds with excellent quality were obtained using the TIG process reaching speeds of 1.5 m/min. Under argon-hydrogen shielding gas mixtures welding speed similar to the conventional MIG/MAG process was allowed, with the advantage of being performed without filler material. The

Implementering af MultifunC

DEFF Research Database (Denmark)

Henze-Pedersen, Sofie; Kohl, Katrine Syppli; Oldrup, Helene

(MultifunC), som allerede havde vist lovende resultater i Norge og Sverige. I 2011 og 2012 åbnede to danske MultifunC-institutioner derfor i henholdsvis København og Aarhus. Denne rapport undersøger, hvordan implementeringen af MultifunC-programmet er forløbet i Danmark. Undersøgelsen viser, at ingen af de...... to danske institutioner lykkedes med at implementere MultifunC tilfredsstillende i løbet af implementeringsperioden. Det har fx været vanskeligt at implementere det tætte tværfaglige samarbejde mellem medarbejdere med forskellige fagprofessionelle baggrunde, som behandlingsprogrammet indebærer. Det har...... desuden været særdeles vanskeligt for de danske MultifunC-institutioner at få etableret det eksterne samarbejde med de sociale myndigheder i kommunerne, politiet, skoler og praktiksteder samt fritidstilbud i nærområdet, som også er en væsentlig del af behandlingsprogrammet. Undersøgelsen af finansieret af...

Test af spørgeskema

DEFF Research Database (Denmark)

Hermansen, Jonathan

2017-01-01

Denne bog gennemgår alle surveyarbejdets faser og giver en praktisk indføring i •design af undersøgelsen og udvælgelse af stikprøver, •formulering af spørgeskemaer samt indsamling og kodning af data, •metoder til at analysere resultaterne....

Test af to versioner af Modflow-LGR til simulering af grundvandsstrømninger i områder med begravede dale – syntetisk studie

DEFF Research Database (Denmark)

Vilhelmsen, Troels Norvin; Christensen, Steen

.eks. findes i begravede dale. Manglende opløsning af geologiske aflejringer på lokal skala kan potentielt resultere i fejlagtige prædiktioner af konsekvensen af grundvandsindvinding på kildeplads niveau. For i højere grad at kunne forvalte disse grundvandsressourcerne skal nye metoder undersøges. Dette er...... specielt gældende for komplekse begravede dalsystemer, som interagerer med omkringliggende regionale grundvandsystemer. I dette syntetiske studie er to versioner af MODFLOW - Local Grid Refinment (LGR) testet til simulering af grundvandsstrømninger i områder med begravede dale. Forsøgene er gennemført som...

Professor: Lær af Canada

DEFF Research Database (Denmark)

Greve, Carsten

2013-01-01

Transportdebatten: En mulig finansiering af fremtidige infrastrukturprojekter kunne være OPP. Danmark bør tage ved lære af erfaringer fra Canada.......Transportdebatten: En mulig finansiering af fremtidige infrastrukturprojekter kunne være OPP. Danmark bør tage ved lære af erfaringer fra Canada....

Anmeldelse af World Drug Report 2005

DEFF Research Database (Denmark)

Møller, Kim

2005-01-01

Internationale udfordringer i spændingsfeltet mellem organiseret kriminalitet og narkotika. Værdien af det illegale narkotikamarked. Skabelsen af et Illicit Drug Index. Ny organisationsstruktur bag udgivelsen af denne WDR. Udgivelsesdato: December......Internationale udfordringer i spændingsfeltet mellem organiseret kriminalitet og narkotika. Værdien af det illegale narkotikamarked. Skabelsen af et Illicit Drug Index. Ny organisationsstruktur bag udgivelsen af denne WDR. Udgivelsesdato: December...

Ledelse af Organisationens Kreativitet

DEFF Research Database (Denmark)

Hedemann, Lars

2008-01-01

forskel, så er man som leder nødt til at arbejde mere målrettet med de medarbejdere som forventes at præstere et kreativt udbytte. Inspireret af analyseværktøjet "KEYS, Assessing the Work Environment for Creativity" udviklet af den amerikanske psykolog og ledelsesforsker ved Harvard University, Teresa...... Amabile, blev en undersøgelse derfor gennemført i udviklingsafdelingerne, Idéland og Idélab hos Bang og Olufsen, for at få et indblik i anvendeligheden af KEYS som inspirationskilde for succesfuld ledelse af organisationens kreativitet....

Digital formidling af kulturarv

DEFF Research Database (Denmark)

En af tidens store kulturelle dagsordner drejer sig om digital tilgængeliggørelse af kulturarv. Fortidens spor dukker op i nye former på nettet - næsten alle kulturinstitutioner arbejder med, og befolkningen har fået helt nye muligheder for at se med og deltage. Digital formidling af kulturarv...

Epichlorhydrin og bisphenol A i mat-kontaktmaterialer af epoxylakeret metal og/eller af plast

DEFF Research Database (Denmark)

Petersen, Jens Højslev; Pedersen, Gitte Alsing; Foverskov, Annie

Det er ikke længere tilladt af bruge bisphenol A baseret polycarbonatplast til fremstilling af tåteflasker. Mattilsynet udtog i vinteren 2012/2013 7 typer af sutteflasker som blev kontrolleret for om de indeholdt polycarbonatbaserede plastdele. I alt 28 enkeltdele blev kontrolleret ved infrarød...... spektrometri. Herudover blev 6 tutekopper, bestående af 38 enkeltdele, analyseret med samme teknik. Der blev ikke påvist bisphenol A baseret plast ved analyserne. Dåser, bægre, tuber og skruelåg kan være lakeret på matkontaktsiden med epoxylakker fremstillet af monomererne epichlorhydrin og bisphenol A. Alle...... 50 enkeltdele fra disse prøver blev undersøgt ved infrarød spektrometri og 9 af prøverne viste tegn på at indeholde epoxylak. Disse prøver blev undersøgt ved en ”worst case” ekstraktionstest hvor der kunne påvises små indhold af bisphenol A i ekstrakterne mens der ikke kunne påvises epichlorhydrin...

ARCgame - gamification af undervisning

DEFF Research Database (Denmark)

Jensen, Camilla Gyldendahl

2014-01-01

Gamification er et begreb, der anvendes til at beskrive brugen af spilelementer i andre miljøer for at forbedre brugernes oplevelse. Følgende tekst har til formål at behandle emnet i forhold til af opnå en forståelse for de elementer der indvirker på en ”gamification af et undervisningsforløb”, her...

Hvad griner du af?

DEFF Research Database (Denmark)

Lorenzen, Tobias Hiort

2012-01-01

latterliggørelse indenfor en sådan teori. Sociologiens begreb om ”un-laughter” angives som en mulig udvej af dette problem. I forlængelse af dette kritiseres den moderne humor-psykologis lære om populationers humor-patologi og til slut argumenteres der for at en moderne dannelse af humor må have en moralsk...

Skoling af lyst

DEFF Research Database (Denmark)

Bjerg, Helle

2011-01-01

På baggrund af interview med tre elevgenerationer fremanalyseres skolens virkningsfuldhed i skoling af lyst i et historisk perspektiv. I afhandlingen udvikles to teoretisk-analytiske optikker: Skolen som ideologisk rum - med inspiration fra Slavoj Zizeks ideologikritik, samt Skolen som affektivt...

Infrared temperature measurement and interference analysis of magnesium alloys in hybrid laser-TIG welding process

International Nuclear Information System (INIS)

Huang, R.-S.; Liu, L.-M.; Song, G.

2007-01-01

Infrared (IR) temperature measurement, as a convenient, non-contact method for making temperature field measurements, has been widely used in the fields of welding, but the problem of interference from radiant reflection is a complicating factor in applying IR temperature sensing to welding. The object of this research is to make a deep understand about the formation of interference, explore a new method to eliminate the interfering radiation during laser-TIG hybrid welding of magnesium alloys and to obtain the distribution of temperature field accurately. The experimental results showed that the interferences caused by radiant specular reflection of arc light, ceramic nozzle, electrode and laser nozzle were transferred out of welding seam while the IR thermography system was placed perpendicularly to welding seam. And the welding temperature distribution captured by IR termography system which had been calibrated by thermocouple was reliable by using this method in hybrid laser-TIG welding process of AZ31B magnesium alloy

Udviklingen af rumopfattelsen 1600-2000

DEFF Research Database (Denmark)

Brock, Steen

2010-01-01

Hovedtræk af rumopfattelsens idehistorie fra Descartes til Wittgenstein med speciel vægt på Kant, værkbegrebet, modelbegrebet og den fænomenologiske opfattelse af rummet som handlingens sted......Hovedtræk af rumopfattelsens idehistorie fra Descartes til Wittgenstein med speciel vægt på Kant, værkbegrebet, modelbegrebet og den fænomenologiske opfattelse af rummet som handlingens sted...

Experimental and numerical simulation of thermomechanical phenomena during a TIG welding process

International Nuclear Information System (INIS)

Depradeux, L.; Julien, J.F.

2004-01-01

In this study, a parallel experimental and numerical simulation of phenomena that take place in the Heat Affected Zone (HAZ) during TIG welding on 316L stainless steel is presented. The aim of this study is to predict by numerical simulation residual stresses and distortions generated by the welding process. For the experiment, a very simple geometry with reduced dimensions is considered: the specimens are disks, made of 316L. The discs are heated in the central zone in order to reproduce thermo-mechanical cycles that take place in the HAZ during a TIG welding process. During and after thermal cycle, a large quantity of measurement is provided, and allows to compare the results of different numerical models used in the simulations. The comparative thermal and mechanical analysis allows to assess the general ability of the numerical models to describe the structural behavior. The importance of the heat input rate and material characteristics is also investigated. When a melted zone is created, the thermal simulation reproduce well the temperature field in the upper face of the disk, but the size of the weld pool is not correctly rated, as fluid flows are not taken into account. Despite this fact, the general structural behavior is well represented by simulation

Undersøgelsen af brugernes evaluering af kontorpakker på Århus Sygehus og i Psykiatrien i Århus

DEFF Research Database (Denmark)

Hørlück, Jens

En analyse af brugernes opfattelse af kvaliteten af tre office pakker: MS Office 2003 / 2007 og OpenOffice.  ......En analyse af brugernes opfattelse af kvaliteten af tre office pakker: MS Office 2003 / 2007 og OpenOffice.  ...

Effect of Cryogenic Treatment on Sensitization of 304 Stainless Steel in TIG Welding

Science.gov (United States)

Singh, Rupinder; Slathia, Ravinder Singh

2016-04-01

Stainless steel (SS) is sensitized by a thermal treatment in the range of 400-850 °C and inter-granular attack would occur upon subsequent exposure to certain media. In many practical situations, such as welding, sensitization is best studied by continuous cooling through the sensitizing temperature range wherein the variables are the peak temperature reached and the cooling rate in contrast to temperature and time of the isothermal hold which has been the customary practice. There are also various methods of controlling the inter-granular corrosion viz. lowering the carbon content, adding stabilizers and applying solution heat treatment but all these methods are either costly or difficult to apply. This study is focussed on the effect of cryogenically treated tungsten electrode of TIG welding on the sensitization behaviour of 304SS by taking into consideration the weld properties (like: hardness, tensile strength, percentage elongation and micro-structure). The parameters of significance are current, pulse frequency and gas flow rate. Further the study suggested that the results of non cryo treated electrode were better than the treated one on sensitization of welded joints during TIG welding within the range of selected parameters.

Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: functional behavior

Science.gov (United States)

Oliveira, J. P.; Barbosa, D.; Braz Fernandes, F. M.; Miranda, R. M.

2016-03-01

It is often reported that, to successfully join NiTi shape memory alloys, fusion-based processes with reduced thermal affected regions (as in laser welding) are required. This paper describes an experimental study performed on the tungsten inert gas (TIG) welding of 1.5 mm thick plates of Ni-rich NiTi. The functional behavior of the joints was assessed. The superelasticity was analyzed by cycling tests at maximum imposed strains of 4, 8 and 12% and for a total of 600 cycles, without rupture. The superelastic plateau was observed, in the stress-strain curves, 30 MPa below that of the base material. Shape-memory effect was evidenced by bending tests with full recovery of the initial shape of the welded joints. In parallel, uniaxial tensile tests of the joints showed a tensile strength of 700 MPa and an elongation to rupture of 20%. The elongation is the highest reported for fusion-welding of NiTi, including laser welding. These results can be of great interest for the wide-spread inclusion of NiTi in complex shaped components requiring welding, since TIG is not an expensive process and is simple to operate and implement in industrial environments.

Microstructure and Mechanical Properties of TIG Weld Joint of ZM5 Magnesium Alloy

Directory of Open Access Journals (Sweden)

QIN Ren-yao

2016-06-01

Full Text Available The ZM5 magnesium alloy plates were welded by TIG welding method. The microstructural characteristics and mechanical properties of ZM5 magnesium alloy joint were studied by optical microscopy, microhardness and tensile testers. The results show that the TIG weld joint of ZM5 magnesium alloy is composed of heat affected zone, partially melted zone and weld metal. The heat affected zone is consisted of primary α-Mg phase and eutectic phase that is composed of eutectic α-Mg and eutectic β-Mg17Al12 phase and mainly precipitated at grain boundaries. In the partially melted zone, the eutectic phase is not only increasingly precipitated at grain boundaries, but also dispersed in grains, and the growth of the β-Mg17Al12 phase is obviously observed. The microstructure in the weld is the typical dendritic morphology. The dendrites are considered as primary α-Mg phase, and the interdendritic regions are α+β eutectic phase. The difference in the microstructure of the heat affected zone, partially melted zone and weld results in their various microhardness values, and leads to the smaller tensile strength and ductility in the ZM5 alloy weld joint than parent metal.

Supervision af psykoterapi

DEFF Research Database (Denmark)

SUPERVISION AF PSYKOTERAPI indtager en central position i uddannelsen og udviklingen af psykoterapeuter. Trods flere lighedspunkter med psykoterapi, undervisning og konsultation er psykoterapisupervision et selvstændigt virksomhedsområde. Supervisor må foruden at være en trænet psykoterapeut kende...... supervisionens rammer og indplacering i forhold til organisation og samfund. En række kapitler drejer sig om supervisors opgaver, roller og kontrolfunktion, supervision set fra supervisandens perspektiv samt betragtninger over relationer og processer i supervision. Der drøftes fordele og ulemper ved de...... forskellige måder, hvorpå en sag kan fremlægges. Bogens første del afsluttes med refleksioner over de etiske aspekter ved psykoterapisupervision. Bogens anden del handler om de særlige forhold, der gør sig gældende ved supervision af en række specialiserede behandlingsformer eller af psykoterapi med bestemte...

Anmeldelse af Evolution, Literature and Film

DEFF Research Database (Denmark)

Grodal, Torben Kragh

2011-01-01

Diskussion af basisproblemer i evolutionær fiktionsteori med udgangspunkt i en anmeldelse af Evolution, Literature and Film......Diskussion af basisproblemer i evolutionær fiktionsteori med udgangspunkt i en anmeldelse af Evolution, Literature and Film...

Strategisk ledelse af evalueringskulturen

Directory of Open Access Journals (Sweden)

Gitte Orlowitz

2016-02-01

Full Text Available Hvis evaluering skal anvendes til at udvikle uddannelser, er en af ledelsen vigtigste opgaver at udvikle en strategi for udvikling af evalueringskulturen – herunder strategier for udvikling af kommunikation og evalueringskapacitet. Den strategiske ledelse kan i den sammenhæng anvendes til at håndtere de ofte modsatte krav, som eksterne og interne interessenter stiller til evaluering.

Evaluering af FIU`s akademiuddannelser

DEFF Research Database (Denmark)

Hansen, Agnete Meldgaard; Nielsen, Kurt Aagaard

I rapporten præsenteres en empirisk evaluerinf af to nye uddannelser i FIUs regi. I forlængelse af evalueringen præsenteres en forskningsmæssig analyse a uddannelsernes rolle i fagbevægelsens modernisering......I rapporten præsenteres en empirisk evaluerinf af to nye uddannelser i FIUs regi. I forlængelse af evalueringen præsenteres en forskningsmæssig analyse a uddannelsernes rolle i fagbevægelsens modernisering...

Welding qualification procedure for fuel rods tubes of Zr-Sn alloys by the TIG automatic process

International Nuclear Information System (INIS)

1984-11-01

It is presented the requirements to be used in the Welding qualification procedure for tubes of Zr-Sn alloys, specified in the ASTM B353 regulatory guide, used in the fabrication of fuel rods PWR reactors by the automatic TIG process. (E.G.) [pt

Udvikling af systemleverancer, parametri og BIM

DEFF Research Database (Denmark)

Kortegaard, Per

2016-01-01

Seminaret rummede indlæg fra både nogle af projektets tidligere ph.d.-studerende og forskellige kompetente professionelle personer fra forskellige grene af praksis. Seminaret gav samlet et fint billede af status indenfor udviklingen af systemleverancer og deres anvendelse i relation til BIM...

Administration af informationsmodeller

DEFF Research Database (Denmark)

Hundebøl, Jesper

2013-01-01

En informationsmodel er i denne sammenhæng en digital repræsentation af et givent byggeri. Både offentlige og private bygherrer anvender informationsmodeller, når der 'bygges digitalt'. I denne artikel undersøges det, hvilke konkrete udfordringer der følger af digitaliseringen, hvor gennemgribend...

Dansk oversættelse af MiDAS, et redskab til assessment af musikterapi for personer med demens

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner; Lykkegaard, Chris; McDermott, Orii

2018-01-01

Music in Dementia Assessment Scales, MiDAS, er udviklet til at vurdere ændringer i trivsel hos borgere med demens som har deltaget i musikterapi. Målingen udføres af 1) personale før og efter musikterapien for at vurdere om der er en indflydelse i hverdagssituationer efterfølgende, eller af 2......) musikterapeuten umiddelbart efter sessionen for at vurdere forandringer i selve sessionen. Der har været stor interesse for at anvende MiDAS i flere Europæiske lande, herunder Danmark. Derfor undersøgte udviklerne af MiDAS hvilke procedurer der anvendes til oversættelse og kulturel tilpasning af...... assessmentredskaber, og anbefalede på den baggrund en ti-trins procedure. Vi anvendte denne procedure til oversættelsen af MiDAS og således udviklingen af den danske MiDAS-DK. Den danske version af MiDAS er afprøvet af mere end 20 fagpersoner på baggrund af 296 udfyldte MiDAS-skemaer. Målet med artiklen er...

Fremtidens biblioteksbetjening af børn

DEFF Research Database (Denmark)

Høyrup, Helene

2008-01-01

Rapporten er resultatet af et tværministerielt udvalgsarbejde nedsat af Kulturministeriet.  Kommissoriet har været at nytænke biblioteksbetjeningen af børn, så den passer til vidensamfundet.  Udvalgsarbejdet munder ud i ti bud for fremtidens biblioteksbetjening af børn....

Beregning af luftlydisolation mellem to rum

DEFF Research Database (Denmark)

Donovan, A.

Meddelelsen bringer resultaterne af en forundersøgelse af to beregningsmetoder. Den ene metode belyses nærmere gennem nogle forenklede eksempler, der viser omfanget af regnearbejdet og peger på nogle af de vanskeligheder det vil indebære at opstille en praktisk anvendelig beregningsmetode....

Regulering af det psykiske arbejdsmiljø

DEFF Research Database (Denmark)

Nielsen, Klaus T.

nationale informationer om reguleringen af det psykiske arbejdsmiljø. Rapport er bygget op med ◊ et internationalt overblik over regulering af psykisk arbejdsmiljø ◊ en bredere diskussion af reguleringens dilemmaer ◊ en gennemgang af den aktuelle danske udvikling ◊ udfordringerne på området...

Anvendeligheden af GIS

DEFF Research Database (Denmark)

Winstrup, Mie; Levin, Gregor

2011-01-01

Fragmentering af naturen er en trussel mod biodiversiteten, og etablering af økologiske forbindelser/korridorer mellem naturområderne er én måde hvorved nedgangen i biodiversitet kan stoppes. Med Næstved Kommune som case-område har jeg undersøgt, hvordan analyser i GIS kan bruges til at udvælge...... omdannet til reelle korridorer, hvor bredden afhænger af arealdækket som forbindelserne krydser. I implementerings øjemed er det anvendeligt at vide om nogle forbindelser er særlig vigtige for at skabe mere sammenhængende natur. GIS er anvendeligt hertil, idet GIS kan bruges til at bestemme den enkelte...

Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser

International Nuclear Information System (INIS)

Amaya-Vazquez, M.R.; Sánchez-Amaya, J.M.; Boukha, Z.; Botana, F.J.

2012-01-01

Highlights: ► Laser remelting of TiG2 and Ti6Al4V is performed with argon shielded diode laser. ► Microstructure, microhardness and corrosion of remelted samples are deeply analysed. ► Microstructural changes of laser remelted TiG2 lead to microhardness increase. ► Remelted Ti6Al4V presents microhardness increase and corrosion improvement. ► Martensite depth in remelted Ti6Al4V is linearly proportional to laser fluence. - Abstract: The high strength, low density and superior corrosion resistance allow titanium alloys to be widely employed in different industrial applications. The properties of these alloys can be modulated by different heat treatments, including laser processing. In the present paper, laser remelting treatments, performed with a high power diode laser, were applied to samples of two titanium alloys (TiG2 and Ti6Al4V). The influence of the applied laser fluence on microstructure, microhardness and corrosion resistance is investigated. Results show that laser remelting treatments with appropriate fluences provoke microstructural changes leading to microhardness increase and corrosion resistance improvement.

Kants Kritik af dømmekraften

DEFF Research Database (Denmark)

Introduktion til Kants Kritik af dømmekraften bestående af otte artikler, der følger værkets egen tematiske opbygning......Introduktion til Kants Kritik af dømmekraften bestående af otte artikler, der følger værkets egen tematiske opbygning...

Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061

Directory of Open Access Journals (Sweden)

Chetan Patil

2016-07-01

Full Text Available This paper reports hardness testing conducted on welded butt joints by FSW and TIG welding process on similar and dissimilar aluminium alloys. FSW joints were produced for similar alloys of AA7075T651 and dissimilar alloys of AA7075T651- AA6061T6. The Friction stir welds of AA7075 & AA6061 aluminium alloy were produced at different tool rotational speeds of 650,700, 800, 900, 1000 and transverse speed of 30, 35, 40 mm/min. TIG welding was conducted along the rolling direction of similar and dissimilar aluminium plates. The Brinell hardness testing techniques were employed to conduct the tests; these tests were conducted on the welds to ascertain the joint integrity before characterization to have an idea of the quality of the welds

Energioptimering af bæredygtighedscertificeringsprocesserne

DEFF Research Database (Denmark)

Christensen, Dorthe Holmberg; Carlsen, Mads; Alon, Shlomo Nevo

2014-01-01

Større fokus på bæredygtighedscertificeringer som DGNB har yderligere øget kompleksiteten af designet af bygninger. Introduktionen af teknologier som building information modelling (BIM) og proces metoder som integreret design proces (IDP) kan hjælpe med at reducere kompleksiteten og bedre...

Meetstrategie TIG: opzet en nadere aanbevelingen. Metingen in het kader van het Nationaal Plan voor de Kernongevallenbestrijding

NARCIS (Netherlands)

Sonderen JF van; LSO

1996-01-01

The intervention levels specified by the government serve as the starting-point for determining the necessary measurements for air, water, soil, foodstuffs and humans. A Technical Information Group (TIG) has been installed within the National Organisation for Nuclear Emergency Management to

Pædagogisk brug af test

DEFF Research Database (Denmark)

Nordenbo, Sven Erik; Allerup, Peter; Andersen, Hanne Leth

Publikationen er resultatet af et systematisk review foretaget i regi af Dansk Clearinghouse for Uddannelsesforskning. Reviewets grundspørgsmål er: Hvordan kan grundskolelæreres individ- og klassecentrerede brug af data fra test forbedre læreres didaktiske og/eller fagdidaktiske tiltag i klasser...... med almindelige elever? Spørgsmålet vedrører alene testtyper, som indgår i nationale test i de nordiske lande. Og hvordan indvirker indførelsen af testning på læreres didaktiske beslutninger og elevers læringsadfærd? Vi fandt frem til at grundskolelæreres individ- og klassecentrerede brug af testdata...... i klasser med almindelige elever forbedres, når de didaktiske og/eller fagdidaktiske tiltag bygger på test, som lærerne oplever et medejerskab for. Vi fandt fremtil, at introduktion af test fra instanser over klasseniveau med det formål at indvirke på undervisning og elevers læringsadfærd har...

Anvendelse af koldpresset rapsolie på varebiler

DEFF Research Database (Denmark)

Nielsen, Claus Suldrup; Ivarsson, Anders; Schramm, Jesper

Denne rapport sammenfatter resultaterne af undersøgelserne omkring anvendelse af koldpresset rapsolie på varebiler. Undersøgelsen, som er udført af Danmarks Tekniske Universitet, Institut for Mekanisk Teknologi, er en del af et større projekt, som er finansieret af Trafikstyrelsens (tidligere Fær...... Færdselsstyrelsen) tilskudsordning til forsøg med biodiesel. Projektet har været administreret af Odense Kommune....

Studerende og underviseres brug af digitale medier - En kvantitativ undersøgelse af Aarhus Universitets studerende og underviseres brug af digitale medier og internettet anno 2008

Directory of Open Access Journals (Sweden)

Maria Hvid Stenalt

2009-06-01

• Hvilke medier anvender universitetsstuderende generelt? • Ligner undervisernes medievalg/forbrug de studerendes? • Hvilke medier inddrager underviserne i undervisningen? Nærværende artikel vil forsøge at besvare disse spørgsmål på baggrund af en kvantitativ spørgeskemaundersøgelse af Aarhus Universitets studerende og underviseres brug af digitale medier og internettet. Undersøgelsen blev gennemført i efteråret 2008 af E-læringsenheden ved Aarhus Universitet som led i en almen kvalitetssikring på media- og e-læringsområdet, samt som led i en behovsafklaring vedrørende etablering af et medie- og podcastarkiv. E-læringsenheden er en administrativ enhed, der teknisk og pædagogisk understøtter underviseres inddragelse af digitale medier i undervisningen.

Welding of cold worked austenitic steels - comparison of TIG, EB and laser processes

International Nuclear Information System (INIS)

Richard, A.; Prunele, D. de; Castilan, F.

1993-01-01

Effect of welding on cold worked components is a local falling of their properties. Modifications induced by such an operation depend on the thermal cycle and consequently on the welding process. An experimental study aim of which is to compare respective effects of different welding processes (TIG, EB, laser) has been realized. This publication presents results related to 316L and 316Ti steels. (author). 2 refs., 7 figs., 1 tab

TIG AISI-316 welds using an inert gas welding chamber and different filler metals: Changes in mechanical properties and microstructure

Directory of Open Access Journals (Sweden)

Sánchez, A.

2010-12-01

Full Text Available This report analyses the influence of the use of an inert gas welding chamber with a totally inert atmosphere on the microstructure and mechanical properties of austenitic AISI 316L stainless steel TIG welds, using AISI ER316L, AISI 308L and Inconel 625 as filler metals. When compared with the typical TIG process, the use of the inert gas chamber induced changes in the microstructure, mainly an increase in the presence of vermicular ferrite and ferrite stringers, what resulted in higher yield strengths and lower values of hardness. Its effect on other characteristics of the joins, such as tensile strength, depended on the filler metal. The best combination of mechanical characteristics was obtained when welding in the inert gas chamber using Inconel 625 as filler metal.

En este estudio se analiza la influencia que el uso de una cámara de soldadura de gas inerte tiene sobre la microestructura y las propiedades mecánicas de las soldaduras TIG en el acero inoxidable austenítico AISI-316L cuando se emplean AISI ER316L, AISI 308L e Inconel 625 como materiales de aporte. Cuando se compara con el típico proceso de TIG, el uso de una cámara de gas inerte induce cambios en la microestructura, incrementando la presencia de ferrita vermicular y de laminillas de ferrita, resultando en un aumento del límite elástico y una pérdida de dureza. Su influencia sobre otras características de las soldaduras como la carga de rotura depende de la composición del material de aporte. La mejor combinación de propiedades mecánicas se obtuvo usando el Inconel 625 como material de aporte y soldando en la cámara de gas inerte.

Prøvetagning af grundvand

DEFF Research Database (Denmark)

Sørensen, Inga

Bogen fokuserer på prøveatgning af grundvand og drikkevand til forskellige formål såsom undersøgelse af forurenede grunde, grundvandsmonitering samt produktion af drikkevand. Da grundvand i sagens natur findes under jordoverfladen, beskriver bogen også væsentlige forhold om hydrogeologi og...

Global opvarmning neutraliserer effekten af parasitisme på strandsnegles konsumption af makroalger

DEFF Research Database (Denmark)

Larsen, Martin H.; Mouritsen, Kim Nørgaard

Det er veldokumenteret, at parasitter kan påvirke værternes adfærd, overlevelse, reproduktion, fysiologi og evolution. Disse parasit-vært interaktioner kan føre til radikale ændringer af naturlige samfunds struktur og diversitet. Eksperimenter har eksempelvis vist, at trematoder indirekte kan ændre...... strukturen af makroalgesamfund ved at reducere konsumptionsraten hos den herbivore strandsnegl Littorina littorea. Det er endvidere vist, at produktionen af trematode-larver (cercarier) i sneglens fordøjelseskanal og gonade kompleks øges kraftigt når vandtemperaturen stiger. Man kan derfor forvente...

Måling af stress hos mink

DEFF Research Database (Denmark)

Malmkvist, Jens

2010-01-01

Sammendrag Stress indgår som et element ved vurdering af dyrevelfærd. Endvidere kan stress mål anvendes i undersøgelser, hvor forskellige typer af avl, burmiljø og pasning af mink sammenlignes. Men hvad er stress egentlig og hvordan måles det? Er unormal adfærd koblet til stress hos mink? På...... temadagen præsenteres nye resultater og metoder til at vurdere stress hos mink. I en metode måles koncentrationen af nedbrydningsprodukter af hormonet cortisol i gødning fra mink. Der er en række fordele ved denne metode, frem for blodprøvetagning. Forsøg viste, at hovedparten af cortisol udskilles i fæces...... (83 %) frem for i urin (17 %), samt at omsætningen af radioaktivt mærket cortisol ikke er forskellig mellem mink med hhv. lav og høj forekomst af stereotypi. Denne viden kan bruges til bedre at forstå koblingen f.eks. unormal adfærd og stress hos mink....

TIG Wire and Arc Additive Manufacturing of 5A06 Aluminum Alloy

Directory of Open Access Journals (Sweden)

HUANG Dan

2017-03-01

Full Text Available Wire and arc additive manufacturing(WAAM was investigated by tungsten inert gas arc welding method(TIG, in which φ1.2mm filler wire of aluminum alloy 5A06(Al-6Mg-Mn-Si was selected as deposition metal. The prototyping process was conducted by a TIG power source(working in AC mode manipulated by a four-axis linkage CNC machine. Backplate preheating temperature and arc current on deposited morphologies of single layer and multi-layer were researched. The microstructure was observed and the sample tensile strength was tested. For single layer, a criterion that describes the correlation between backplate preheating temperature and arc peak current, of which both contribute to the smoothening of the deposited layer. The results show that the layer height drops sharply from the first layer of 3.4mm and keeps at 1.7mm after the 8th layer. Fine dendrite grain and equiaxed grain are found inside a layer and coarsest columnar dendrite structure at layer boundary zone; whereas the microstructure of top region of the deposited sample changes from fine dendrite grain to equiaxed grain that turns to be the finest structure. Mechanical property of the deposited sample is isotropic, in which the tensile strength is approximately 295MPa with the elongation around 36%.

På sporet af de gyldne opskrifter?

DEFF Research Database (Denmark)

Poulfelt, Flemming

2015-01-01

Børsen Ledelse. Markedet for kogebøger er stort. For der produceres hvert år et hav nye af slagsen. Nogle udgives af kendte kokke, nogle af særlige eksperter inden for kost og motion, og andre af personer, der har en ægte interesse inden for gastronomi og mad. På ledelsesområdet findes en...

Påvisning af PCV2

DEFF Research Database (Denmark)

Neumann, Katrine; Buse, Katja Strøm; Hjulsager, Charlotte Kristiane

2018-01-01

Mængden af PCV2-virus i poolede serumprøver kan anvendes til at finde grise med meget PCV2-virus, hvorimod mængden af PCV2-virus i spyt og fæces er velegnede til at vurdere tilstedeværelsen af eller tidspunktet for en begyndende PCV2-infektion...

Påvisning af PCV2

DEFF Research Database (Denmark)

Neumann, Katrine; Buse, Katja Strøm; Hjulsager, Charlotte Kristiane

Mængden af PCV2-virus i poolede serumprøver kan anvendes til at finde grise med meget PCV2-virus, hvorimod mængden af PCV2-virus i spyt og fæces er velegnede til at vurdere tilstedeværelsen af eller tidspunktet for en begyndende PCV2-infektion...

Topological ferrimagnetic behaviours of coordination polymers containing manganese(II) chains with mixed azide and carboxylate bridges and alternating F/AF/AF'/AF'/AF interactions.

Science.gov (United States)

Wang, Yan-Qin; Liu, Hou-Ting; Qi, Yan; Gao, En-Qing

2014-08-21

Two Mn(ii) complexes with azide and a new zwitterionic tetracarboxylate ligand 1,2,4,5-tetrakis(4-carboxylatopyridinium-1-methylene)benzene (L(1)), {[Mn5(L(1))2(N3)8(OH)2]·12H2O}n () and {[Mn5(L(1))2(N3)8(H2O)2](ClO4)2·6H2O}n (), have been synthesized and characterized crystallographically and magnetically. and contain similar alternating chains constructed by azide and carboxylate bridges. The independent sets of bridges alternate in an ABCCB sequence between adjacent Mn(ii) ions: (EO-N3)2 double bridges (EO = end-on) (denoted as A), [(EO-N3)(OCO)2] triple bridges (denoted as B) and [(EO-N3)(OCO)] double bridges (denoted as C). The alternating chains are interlinked into 2D coordination networks by the tetrapyridinium spacers. Magnetic studies demonstrate that the magnetic coupling through the double EO azide bridges is ferromagnetic and that through mixed azide/carboxylate bridges is antiferromagnetic. The unprecedented F/AF/AF'/AF'/AF coupling sequence along the chain dictates an uncompensated ground spin state (S = 5/2 per Mn5 unit) and leads to one-dimensional topological ferrimagnetism, which features a minimum in the χT versus T plot.

Health Information in Somali (Af-Soomaali )

Science.gov (United States)

... and Wound Healing - Af-Soomaali (Somali) Bilingual PDF Health Information Translations Fasting Blood Sugar Test - Af-Soomaali (Somali) Bilingual PDF Health Information Translations GTT (Glucose Tolerance Test) - Af-Soomaali ( ...

Barrierer for ibrugtagning af videooptaget universitetsundervisning

DEFF Research Database (Denmark)

Rattleff, Pernille

2009-01-01

tilgængelige for studerende og andre interesserede. Der kan således iagttages nogle barrierer i forhold til ibrugtagning af videooptaget undervisning på universitetsniveau, idet underviserne for en umiddelbar betragtning tilsyneladende for det første har nogle forbehold af psykologisk, for det andet af...... begrebsafklaring, præsenterer forfatterne i denne artikel erfaringerne med tilbud af videostreamet og podcastet universitetsundervisning til studerende på Danmarks Pædagogiske Universitetsskole med henblik på en diskussion af de potentialer og især de barrierer, der kan iagttages i forhold til en mere systematisk...

Dialektisk billede af Benjamin

DEFF Research Database (Denmark)

Bøggild, Jacob

2004-01-01

Anmeldelse af Lars Brückner: "Løse blade. Læseren, kritikeren og fortælleren Walter Benjamin"......Anmeldelse af Lars Brückner: "Løse blade. Læseren, kritikeren og fortælleren Walter Benjamin"...

Strategi til udbredelse og udvikling af aquaponik

OpenAIRE

Bartholin, Aline; Nielsen, Per

2014-01-01

Denne rapport omhandler, hvorledes aquaponik i fremtiden skal udbredes med henblik på at produktionsmetoden bliver en del af den etablerede fødevaresektor. Ud fra et interview med PlanteLaboratoriet som er en del af foreningen Akvaponisk Selskab, samt observationer af en workshop afholdt af PlanteLaboratoriet forsøger vi at kortlægge den førte strategi til udbredelse og udvikling af aquaponik, samt undersøge hvorledes aquaponik som innovation bliver taget imod af mulige adoptere. Empirien sam...

Bekæmpelse af elmesyge

DEFF Research Database (Denmark)

Thomsen, Iben Margrete; Kristoffersen, Palle; Ravn, Hans Peter

2004-01-01

Elmesygen kom til Danmark i 1970’erne. Efter 1985 er udbredelsen gået stærkt, og elmesygen har været katastrofal for bestanden af bytræer og træer i landskabet. Bekæmpelse består fortrinsvis af sanering, dvs. fjernelse af syge og billeangrebne træer inden 1. maj....

Energiforbrug til opvarmning af bygninger

DEFF Research Database (Denmark)

Budde, J.; Pedersen, D.O.

Rapporten giver oplysninger om enhedsforbrug til varme og varmt brugsvand i forskellige typer af bygninger baseret på en analyse af et omfattende datamateriale. Formålet med undersøgelsen har været at ajourføre denne del af grundlaget for både landsdækkende og lokal varmeplanlægning i Danmark....

Udlejers godkendelse af ny erhvervslejer

DEFF Research Database (Denmark)

Munk-Hansen, Carsten

2009-01-01

I artiklen er taget udgangspunkt i den »klassiske« afståelsessituation, hvor en lejer vil afhænde den i de lejede lokaler drevne virksomhed, og lejeren har afståelsesret til en af udlejer godkendt lejer, uden at kravene til den ny lejer er specificeret. På baggrund af Vestre Landsrets dom af 9/2 ...

Dannelsen af den ansvarlige elev

DEFF Research Database (Denmark)

Larsen, Jesper

2010-01-01

Denne artikel handler om den del af lærergerningen, der har at gøre med udarbejdelse af elevplaner. Der tages udgangspunkt i en foucaultsk forståelse, hvor beskrivelsen af den enkelte elev udtrykker et særligt normativt ideal om, hvilke former for elevhed der er de ønskværdige i den danske...

Soldadura TIG de los aceros inoxidables dúplex del tipo 22-05 (Uranus 45N y Avesta. Estudio de la microestructura y de las propiedades mecánicas

Directory of Open Access Journals (Sweden)

Gómez de Salazar, J. M.

1998-05-01

Full Text Available TIG welding of two different duplex stainless steels is carried out. Arc-discharge on base-material plates by means of the TIG technique without filler metal and varying the energetic conditions (E.N.A. has been performed, A comparative study concerning the microstructural evolution as well as mechanical properties is carried out, The relation between hardness profiles, the microstructural variations and the ferrita δ concentration is established. Further, the above mentioned properties are related to the E.N.A. for each welded joint.

Se estudia la soldadura TIG de dos aceros inoxidables dúplex. Para ello, se ha descargado un arco sobre las chapas de material base mediante la técnica TIG, sin aportación de material y variando las E.N.A. Se realiza un estudio comparativo de la evolución microestructural, así como de las propiedades mecánicas. Se establece la relación entre los perfiles de dureza obtenidos y la variación microestructural y de la concentración de ferrita δ, así como estas propiedades con el E.N.A, de cada cordón.

Didaktisk design af et pervasive learning game

DEFF Research Database (Denmark)

Oldenskov, Joakim; Westergren, Jens; Frank, Anders Bredahl

2010-01-01

Projektet er et studie i det teoretiske grundlag for, og en empirisk undersøgelse, af en prototype for et didaktisk design af et pervasive learning game. Der arbejdes overordnet med udviklingen af et didaktisk design af et læringsspil som kombinerer mobile teknologier, det fysiske rum og eleverne...... game med en analyse af legen og motivationen iboende spillet. I det læringsteoretiske felt inddrages og diskuteres forskellige tilgange til læring og pervasive games, som alle repræsenterer et socialkonstruktivistisk syn på læring. Det didaktiske design danner grundlag for et prototypedesign af et...... funktionalitet som en del af undervisningen. Det er afgørende at teknologien er pålidelig og er let at gå til, da det er kernefunktionen i denne type af spil. Legens rolle er vigtig for motivationen, men må ikke overtage de formelle krav til den undervisning, som spillet er del af. Det var entydigt omkring...

Análise metalográfica do titânio puro submetido à soldagem laser Nd: YAG e TIG

Directory of Open Access Journals (Sweden)

Ana Cláudia Gabrielli Piveta

Full Text Available INTRODUÇÃO: Os métodos de soldagem mais utilizados em Odontologia não podem ser aplicados ao titânio puro e às suas ligas em função da alta reatividade do titânio com elementos atmosféricos; dessa forma, o mesmo não deve ser soldado por processo comum. OBJETIVO: O objetivo deste trabalho foi avaliar a característica metalúrgica do titânio comercialmente puro sem solda e submetido aos processos de soldagem a laser e TIG. MATERIAL E MÉTODO: Foram confeccionados 15 corpos de prova em titânio comercialmente puro, cinco para cada condição, na forma de hastes cilíndricas, obtidas por fundição odontológica, sob atmosfera de gás argônio e vácuo, com calor produzido por um arco voltaico, com a injeção do titânio sob vácuo-pressão. Três grupos foram formados I: soldagem a laser; II: soldagem TIG, e III: sem solda. Os corpos de prova do grupo I e II foram seccionados ao meio e soldados por TIG e por laser, respectivamente; o grupo III foi mantido sem corte e sem solda, como controle. A análise metalográfica foi realizada sob aumentos de 50×, 100× e 200×, em microscópio. RESULTADO: Pelos resultados obtidos nas micrografias, o titânio comercialmente puro apresentou uma morfologia de grãos equiaxiais da fase α, o cordão de solda a laser apresentou estrutura martensítica e, na TIG, microestrutura Widmanstätten. CONCLUSÃO: A microestrutura martensítica é condizente com a alta taxa de resfriamento proveniente do processo de soldagem a laser. As estruturas martensítica e Widmansttäten são mais refinadas quando comparadas à microestrutura do metal base.

Vurdering af omfang og konsekvenser af sprøjtning og gødskning af § 3-beskyttede naturarealer

DEFF Research Database (Denmark)

Strandberg, Morten Tune; Bak, Jesper Leth; Bladt, Jesper Stentoft

2012-01-01

Det er overvejende de ferske enge, der gødskes og sprøjtes, hvorimod dette kun undtagelsesvist er konstateret på andre naturtyper som overdrev og heder m.m. De ferske enge er samtidig den mest udbredte § 3-naturtype. Behandling i form af gødskning og sprøjtning foregår anslået på op til 20 % af a...

På sporet af innovation

DEFF Research Database (Denmark)

Strandgaard, Lone Bak

organisationen blandt ledere og medarbejdere samt eksternt, uden for organisationen, hos dens kunder. Ph.d.-afhandlingen På sporet af innovation har som formål at bidrage til forståelse af, hvordan organisationers arbejde med digital selvbetjening kan fremmes, set i et innovationsteoretisk perspektiv. Foruden en...... indføring i innovationsteorien og dens udvikling belyser afhandlingens resultater hvordan at innovationspotentialet kan styrkes gennem organisatorisk åbenhed og samarbejde i alle dele af den innovative proces. Dette gælder ved både idéudvikling, realisering og spredning af nye digitale løsninger.......Flere og flere private og offentlige servicer digitaliseres, så kunder, borgere og virksomheder, i øget grad betjener sig selv. Digital selvbetjening kan potentielt effektivisere driften og skabe bedre kundeservice. Men processen har udfordringer, da den kan kræve omfattende omstilling internt i...

Dansk oversættelse af MiDAS, et redskab til assessment af musikterapi for personer med demens

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner; Lykkegaard, Chris; McDermott, Orii

2018-01-01

DAS explored which procedures is used for outcome measure translation and cultural adaptation, and based on this recommended a ten-step procedure. We applied this procedure in order to translate MiDAS and hereby develop the Danish MiDAS-DK. The Danish MiDAS version has been tested by more than 20 professionals......) musikterapeuten umiddelbart efter sessionen for at vurdere forandringer i selve sessionen. Der har været stor interesse for at anvende MiDAS i flere Europæiske lande, herunder Danmark. Derfor undersøgte udviklerne af MiDAS hvilke procedurer der anvendes til oversættelse og kulturel tilpasning af...... assessmentredskaber, og anbefalede på den baggrund en ti-trins procedure. Vi anvendte denne procedure til oversættelsen af MiDAS og således udviklingen af den danske MiDAS-DK. Den danske version af MiDAS er afprøvet af mere end 20 fagpersoner på baggrund af 296 udfyldte MiDAS-skemaer. Målet med artiklen er...

Effects of nano-particles strengthening activating flux on the microstructures and mechanical properties of TIG welded AZ31 magnesium alloy joints

International Nuclear Information System (INIS)

Xie, Xiong; Shen, Jun; Cheng, Liang; Li, Yang; Pu, Yayun

2015-01-01

Highlights: • Increased nano-particles strengthening activating flux degraded TIGed seams. • The reaction between SiC particles and Mg alloy produced Al 4 C 3 and Mg 2 Si phases. • Al 4 C 3 and SiC particles promoted the nucleation and suppressed the growth of α-Mg. • Refined α-Mg grains, precipitated phase and SiC particles enhanced TIGed joints. - Abstract: In this paper, AZ31 magnesium alloy joints were processed by nano-particles strengthening activating flux tungsten inert gas (NSA-TIG) welding, which was achieved by the mixed TiO 2 and nano-SiC particles coated on the samples before welding tests. The macro/micro structural observation and mechanical properties evaluation of the welding joints were conducted by using optical microscope, scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction and tension and microhardness tests. The results showed that nano-particles strengthening activating flux effective improved the microstructure, microhardness in fusion zone, ultimate tensile strength of the TIG welding joints. In addition, the chemical reaction between part of SiC particles and AZ31 magnesium alloy produced Al 4 C 3 and Mg 2 Si in the joints. The Al 4 C 3 performed as nucleating agents for α-Mg and the dispersed Mg 2 Si and SiC particles enhanced the mechanical properties of the NSA-TIG welding joints. However, large heat input induced by the increase of the surface coating density of the nano-particles strengthening activating flux, increased the α-Mg grain sizes and weakened the mechanical properties of the welded joints. Therefore, the grain size of α-Mg, distribution of β-Mg 17 Al 12 , Mg 2 Si and SiC particles together influenced the evolution of the mechanical properties of the NSA-TIG welded AZ31 magnesium alloy joints

MR-AFS: a global hierarchical file-system

International Nuclear Information System (INIS)

Reuter, H.

2000-01-01

The next generation of fusion experiments will use object-oriented technology creating the need for world wide sharing of an underlying hierarchical file-system. The Andrew file system (AFS) is a well known and widely spread global distributed file-system. Multiple-resident-AFS (MR-AFS) combines the features of AFS with hierarchical storage management systems. Files in MR-AFS therefore may be migrated on secondary storage, such as roboted tape libraries. MR-AFS is in use at IPP for the current experiments and data originating from super-computer applications. Experiences and scalability issues are discussed

Blended Learning Analytics Model for Evaluation (BLAME). Et case-studie af universitetsunderviseres brug af Blackboard

DEFF Research Database (Denmark)

Musaeus, Peter; Bennedsen, Andreas Brændstrup; Hansen, Janne Saltoft

2015-01-01

I denne artikel vil vi præsentere en strategi til inddragelse af læringsanalytik (learning analytics) ved evaluering af universitetsunderviseres brug af et nyt LMS på Aarhus Universitet: Blackboard. Vi diskuterer en model (BLAME: Blended Learning Analytics Model of Evaluation) for, hvordan...... kategorisering af kurser og data om læringsanalytik indsamlet på Blackboard kan integreres. Endvidere belyser vi, hvilke implikationer en sådan læringsanalytik kan have for blended learning ved at analysere to forskellige uddannelses-cases/illustrationer. Dernæst diskuterer vi pædagogisk udvikling i forbindelse...

Raman af hvide pigmenter

DEFF Research Database (Denmark)

Reeler, Nini Elisabeth Abildgaard; Nielsen, Ole Faurskov; Sauer, Stephan P. A.

2013-01-01

Et samspil mellem kunst og kemi. I et samarbejde mellem Statens Museum for Kunst og Kemisk Institut på KU er Ramanspek-troskopi brugt til at definere sammensætningen af blandinger af blyhvidt og calcit i maleriers hvide pigmenter....

Midtvejsevaluering af EGA handlingsplanen

DEFF Research Database (Denmark)

Møller, Niels; Hasle, Peter; Christiansen, Jørgen Møller

Center for Alternativ Samfundsanalyse (CASA) og Institut for Teknologi og Samfund ved Danmarks Tekniske Universitet har gennemført denne midtvejsevaluering af arbejdsmarkedets parters handlingsplan mod reduktion af ensidigt gentaget arbejde. Undersøgelsen viser, at der er sket en betydelig...

Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser

Energy Technology Data Exchange (ETDEWEB)

Amaya-Vazquez, M.R. [Laboratorio de Corrosion y Proteccion, Universidad de Cadiz, Departamento de Ciencia de los Materiales e Ingenieria Metalurgica y Quimica Inorganica, Avda. Republica Saharaui s/n, 11510 Puerto Real, Cadiz (Spain); Sanchez-Amaya, J.M., E-mail: josemaria.sanchez@uca.es [Titania, Ensayos y Proyectos Industriales S.L., Ctra Sanlucar A-2001 Km 7,5, Parque Tecnologico TecnoBahia-Edif. RETSE Nave 4, 11500 El Puerto de Santa Maria, Cadiz (Spain); Departamento de Fisica Aplicada, CASEM, Avda. Republica Saharaui s/n, 11510-Puerto Real, Cadiz (Spain); Boukha, Z.; Botana, F.J. [Laboratorio de Corrosion y Proteccion, Universidad de Cadiz, Departamento de Ciencia de los Materiales e Ingenieria Metalurgica y Quimica Inorganica, Avda. Republica Saharaui s/n, 11510 Puerto Real, Cadiz (Spain)

2012-03-15

Highlights: Black-Right-Pointing-Pointer Laser remelting of TiG2 and Ti6Al4V is performed with argon shielded diode laser. Black-Right-Pointing-Pointer Microstructure, microhardness and corrosion of remelted samples are deeply analysed. Black-Right-Pointing-Pointer Microstructural changes of laser remelted TiG2 lead to microhardness increase. Black-Right-Pointing-Pointer Remelted Ti6Al4V presents microhardness increase and corrosion improvement. Black-Right-Pointing-Pointer Martensite depth in remelted Ti6Al4V is linearly proportional to laser fluence. - Abstract: The high strength, low density and superior corrosion resistance allow titanium alloys to be widely employed in different industrial applications. The properties of these alloys can be modulated by different heat treatments, including laser processing. In the present paper, laser remelting treatments, performed with a high power diode laser, were applied to samples of two titanium alloys (TiG2 and Ti6Al4V). The influence of the applied laser fluence on microstructure, microhardness and corrosion resistance is investigated. Results show that laser remelting treatments with appropriate fluences provoke microstructural changes leading to microhardness increase and corrosion resistance improvement.

Does an interdisciplinary outpatient atrial fibrillation (AF) clinic affect the number of acute AF admissions?

DEFF Research Database (Denmark)

Frydensberg, Vivi Skibdal; Brandes, Axel

2018-01-01

AIMS AND OBJECTIVES: To investigate the impact of a multidisciplinary outpatient clinic for patients with atrial fibrillation (AF-clinic) on the number of acute hospitalizations for atrial fibrillation compared with usual outpatient care for this condition before the establishment of the AF-clinic....... BACKGROUND: Guidelines recommend a structured outpatient clinic follow-up in multidisciplinary teams for patients with atrial fibrillation due to fewer hospitalizations and death. However the evidence base is weak. DESIGN: The study is a retrospective cohort study including a total of 129 patients from...... the cardiac outpatient clinic at a large Danish University Hospital. The study population consisted of two groups: a usual care group before a dedicated AF-clinic was established (n=73) and the AF-clinic group (n=56). The primary endpoint was acute hospitalization for AF. METHODS: Cox regression was used...

Numerical simulation on temperature field of TIG welding for 0Cr18Ni10Ti steel cladding and experimental verification

International Nuclear Information System (INIS)

Luo Hongyi; Tang Xian; Luo Zhifu

2015-01-01

Aiming at tungsten inert gas (TIG) for 0Cr18Ni10Ti stainless steel cladding for radioactive source, the numerical calculation of welding pool temperature field was carried out through adopting ANSYS software. The numerical model of non-steady TIG welding pool shape was established, the heat enthalpy and Gaussian electric arc heat source model of surface distribution were introduced, and the effects of welding current and welding speed to temperature field distribution were calculated. Comparing the experimental data and the calculation results under different welding currents and speeds, the reliability and correctness of the model were proved. The welding technological parameters of 0Cr18Ni10Ti stainless steel were optimized based on the calculation results and the welding procedure was established. (authors)

Effect of current and speed on porosity in autogenous Tungsten Inert Gas (TIG) welding of aluminum alloys A1100 butt joint

Science.gov (United States)

Milyardi, Indra; Sunar Baskoro, Ario

2018-04-01

Autogenous Tungsten Inert Gas (TIG) welding has been conducted on aluminum alloy A1100. The purpose of this research is to determine the proper current and speed of autogenous TIG welding with butt joint pattern. Variations on welding current are 150 A, 155 A, and 160 A with the variations on welding speed are 1 mm/seconds, 1.1 mm/seconds, 1.2 mm/seconds. The welded results were tested using non-destructive test (NDT) method using X-Ray radiography. After the test, it is found that the appropriate current for the best result without porosity can be achieved using the welding parameter of welding current of 160 A and the welding speed of 1.1 mm seconds.

Lejere der bliver sat ud af deres bolig

DEFF Research Database (Denmark)

Christensen, Gunvor; Nielsen, Torben Heien

Antallet af lejere, der bliver sat ud af deres bolig, er steget i perioden 2002-06. I 2006 blev 2600 husstande, svarende til 0,1 pct. af samtlige husstande i Danmark, sat ud af deres bolig. Stigningen er især sket i de fem største byer: København, Århus, Odense, Ålborg og Esbjerg. I dette...... skal give viden om, hvilke årsager der er til, at nogle lejere bliver sat ud af deres bolig, og hvorfor der er sket en stigning i antallet af udsættelser. Den endelige afrapportering af undersøgelsen af udsættelser i Danmark vil ske i foråret 2008. Undersøgelsen er finansieret af Socialministeriet....

Weldability of AA 5052 H32 aluminium alloy by TIG welding and FSW process - A comparative study

Science.gov (United States)

Shanavas, S.; Raja Dhas, J. Edwin

2017-10-01

Aluminium 5xxx series alloys are the strongest non-heat treatable aluminium alloy. Its application found in automotive components and body structures due to its good formability, good strength, high corrosion resistance, and weight savings. In the present work, the influence of Tungsten Inert Gas (TIG) welding parameters on the quality of weld on AA 5052 H32 aluminium alloy plates were analyzed and the mechanical characterization of the joint so produced was compared with Friction stir (FS) welded joint. The selected input variable parameters are welding current and inert gas flow rate. Other parameters such as welding speed and arc voltage were kept constant throughout the study, based on the response from several trial runs conducted. The quality of the weld is measured in terms of ultimate tensile strength. A double side V-butt joints were fabricated by double pass on one side to ensure maximum strength of TIG welded joints. Macro and microstructural examination were conducted for both welding process.

Latest MIG, TIG arc-YAG laser hybrid welding systems for various welding products

Science.gov (United States)

Ishide, Takashi; Tsubota, Shuho; Watanabe, Masao

2003-03-01

Laser welding is capable of high-efficiency low-strain welding, and so its applications are started to various products. We have also put the high-power YAG laser of up to 10 kW to practical welding use for various products. On the other hand the weakest point of this laser welding is considered to be strict in the welding gap aiming allowance. In order to solve this problem, we have developed hybrid welding of TIG, MIG arc and YAG laser, taking the most advantages of both the laser and arc welding. Since the electrode is coaxial to the optical axis of the YAG laser in this process, it can be applied to welding of various objects. In the coaxial MIG, TIG-YAG welding, in order to make irradiation positions of the YAG laser beams having been guided in a wire or an electrode focused to the same position, the beam transmitted in fibers is separated to form a space between the separated beams, in which the laser is guided. With this method the beam-irradiating area can be brought near or to the arc-generating point. This enables welding of all directions even for the member of a three-dimensional shape. This time we carried out welding for various materials and have made their welding of up to 1 mm or more in welding groove gap possible. We have realized high-speed 1-pass butt welding of 4m/min in welding speed with the laser power of 3 kW for an aluminum alloy plate of approximately 4 mm thick. For a mild steel plate also we have realized butt welding of 1m/min with 5 kW for 6 mm thick. Further, in welding of stainless steel we have shown its welding possibility, by stabilizing the arc with the YAG laser in the welding atmosphere of pure argon, and shown that this welding is effective in high-efficiency welding of various materials. Here we will report the fundamental welding performances and applications to various objects for the coaxial MIG, TIG-YAG welding we have developed.

Registrering af biometriske og biologiske personoplysninger

DEFF Research Database (Denmark)

Blume, Peter Erik; Herrmann, Janne Rothmar

2009-01-01

Med udgangspunkt i menneskeretsdomstolens Marper dom drøftes i artiklen indretningen af dansk rets regler om registrering af fingeraftryk og dna-profil med tilhørende biologisk materiale, og om dommen nødvendiggør ændringer af disse regler....

Hærdeteknologi og Holdbarhed af Betonkonstruktioner

DEFF Research Database (Denmark)

Sørensen, Eigil V.

Kurset Hærdeteknologi og Holdbarhed af Betonkonstruktioner afholdes i 1. og 2. periode af forårssemesteret 2006. Kurset sigter på at give de studerende en grundlæggende forståelse af, hvorledes man designer og udfører holdbare betonkonstruktioner....

International fragmentation af produktionen og vertikal disintegration af styringsformer i produktionskæderne

DEFF Research Database (Denmark)

Refslund, Bjarke

Stigende international økonomisk integration har betydet en stigende fragmentering af produktionen, hvor store dele udføres i forskellige lande. Dertil kommer en stigende disintegration af vertikale styringsformer i produktions-værdikæder (Global Value Chains). Dette konferencepaper diskutere...

Identifikation af forkullet lig ved hjælp af ganeaftryk og koralnyresten

DEFF Research Database (Denmark)

Leth, Peter Mygind; Bindslev, Dorthe Arenholt; Kristensen, Ingrid Bayer

1997-01-01

En retstodontologisk undersøgelse af en dødfunden, uidentificeret person, bygger almindeligvis på en undersøgelse af tandsættet. Hvis personen er tandløs må andre identifikationsmetoder tages i anvendelse. Fingeraftryk er et almindelig kendt eksempel på en alternativ metode, som bygger på, at cri...

An Interface Transformation Strategy for AF-IPPS

Science.gov (United States)

2012-12-01

Oracle, or SAP . Like other AF and Department of Defense (DoD) ERP programs, AF-IPPS is expected to have 100+ interfaces with 90+ external trading partners...platform such as PeopleSoft, Oracle, or SAP . Like other AF and Department of Defense (DoD) ERP programs, AF-IPPS is expected to have 100...currently perform these functions. The core of AF-IPPS will be implemented using an Enterprise Resource Planning ( ERP ) platform such as PeopleSoft

Coaching af dit studieliv

DEFF Research Database (Denmark)

Hansen, Rasmus Thorning

2008-01-01

En generel beskrivelse af de problemer specialestuderende sidder med og hvorledes coaching kan hjælpe med at (gen)skabe motivation og fokus......En generel beskrivelse af de problemer specialestuderende sidder med og hvorledes coaching kan hjælpe med at (gen)skabe motivation og fokus...

Kvalitetsvurdering af sundhedsoplysende materiale

DEFF Research Database (Denmark)

Osler, Merete; Bech, Lars; Sybille, Bojlén

1990-01-01

Lægeforeningens Hygiejnekomités arbejdsgruppe vedrørende sundhedsoplysning har udarbejdet en "huskeliste" til brug for en kvalitetsvurdering af skriftligt sundhedsoplysende materiale......Lægeforeningens Hygiejnekomités arbejdsgruppe vedrørende sundhedsoplysning har udarbejdet en "huskeliste" til brug for en kvalitetsvurdering af skriftligt sundhedsoplysende materiale...

Implementering af evidensbaseret praksis

DEFF Research Database (Denmark)

Scheel, Linda Schumann; Tewes, Marianne; Petersen, Preben Ulrich

2015-01-01

Projektet omhandler implementering af den kliniske retningslinje om identifikation, forebyggelse og behandling af delirium – i denne sammenhæng relateret til hjertepatienter. Projektet foregår på to hospitaler i Hjertecentret på Rigshospitalet, et intensivt afsnit og et sengeafsnit, i tæt...

Implementering af evidensbaseret praksis

DEFF Research Database (Denmark)

Scheel, Linda Schumann; Hansen, Ida Rode

2014-01-01

Projektet omhandler implementering af den kliniske retningslinje om identifikation, forebyggelse og behandling af delirium – i denne sammenhæng relateret til hjertepatienter. Projektet foregår på to hospitaler i Hjertecentret på Rigshospitalet, et intensivt afsnit og et sengeafsnit, i tæt...

Magtens repræsentation af danskhed

DEFF Research Database (Denmark)

Madsen, Carsten

2016-01-01

Med udgangspunkt i Maurice Charlands begreb om konstitutiv retorik og Jacques Derridas dekonstruktion af repræsentationslogik foretager artiklen en kritisk analyse og fortolkning af repræsentationen af dansk nationalidentitet, sådan som den kommer til udtryk i Dronning Margrethes nytårstaler...

På kanten af ungdomslivet

DEFF Research Database (Denmark)

Sørensen, Niels Ulrik; Pless, Mette

2015-01-01

). Parallelt hermed fortælles moderne ungdomsliv (i ungdomssociologien) frem gennem ”…theoretical frameworks based on urban experiences which capture neither the lives of rural young people nor the spatial dimensions of the structures and cultures that make up contemporary youth.” (Farrugia 2013......, at yderområder er hårdt ramt af ungdomsarbejdsløshed (Bjørnsted & Andersen 2013), at områderne er præget af høj koncentration af unge med arbejderklassebaggrund (Ottosen et a 2010), mens de uddannelsesorienterede og ressourcestærke unge er tilbøjelige til at flytte væk og ind til byerne (Helve 2003). Og ser man...... stedstilknytning og stedbundne ressourcer. Teoretiske perspektiver, der peger på vigtigheden af en mere ”..spatialised youth sociology that is sensitive to macro-level processes producing different spaces, as well as the local, emplaced ways in which young people are responding to social changest hat shape...

Stable knockdown of PASG enhances DNA demethylation but does not accelerate cellular senescence in TIG-7 human fibroblasts.

Science.gov (United States)

Suzuki, Toshikazu; Farrar, Jason E; Yegnasubramanian, Srinivasan; Zahed, Muhammed; Suzuki, Nobuo; Arceci, Robert J

2008-09-01

Demethylation of 5-methylcytosine in genomic DNA is believed to be one of the mechanisms underlying replicative life-span of mammalian cells. Both proliferation associated SNF2-like gene (PASG, also termed Lsh) and DNA methyltransferase 3B (Dnmt3b) knockout mice result in embryonic genomic hypomethylation and a replicative senescent phenotype. However, it is unclear whether gradual demethylation of DNA during somatic cell division is directly involved in senescence. In this study, we retrovirally transduced TIG-7 human fibroblasts with a shRNA against PASG and compared the rate of change in DNA methylation as well as the replicative life-span to control cells under low (3%) and ambient (20%) oxygen. Expression of PASG protein was decreased by approximately 80% compared to control cells following transduction of PASG shRNA gene. The rate of cell growth was the same in both control and PASG-suppressed cells. The rate of demethylation of DNA was significantly increased in PASG-suppressed cells as compared control cells. However, decreased PASG expression did not shorten the replicative life-span of TIG-7 cells. Culture under low oxygen extended the life-span of TIG-7 cells but did not alter the rate of DNA demethylation. While knockout of PASG during development results in genomic hypomethylation and premature senescence, our results show that while downregulation of PASG expression in a somatic cell also leads to DNA hypomethylation, there is no associated senescent phenotype. These results suggest differences in cellular consequences of hypomethylation mediated by PASG during development compared to that in somatic cells.

For bestemmelse af drivhusgasudledning ved udtagning/Ekstensivering af landbrugsjorder på kulstofrige lavbundsjorder

DEFF Research Database (Denmark)

Gyldenkærne, Steen; Greve, Mogens Humlekrog

Sammenfatning: Rapporten beskriver hvordan man kan beregne ændringen i drivhusgasemissionen ved omlægning af landbrugsjord til naturarealer. Rapporten er primært rettet mod tilskudsordningen vedr. udtagning af organiske lavbundsjorde, men kan også anvendes i andre sammenhænge. Rapporten anvender de...

Omsætning af fast ejendom

DEFF Research Database (Denmark)

Edlund, Hans Henrik

Bogen er en systematisk gennemgang af lov om omsætning af fast ejendom, der regulerer ejendomsmægleres virke. Følgende emner er bl.a. behandlet: Hvem kan drive ejendomsmæglervirksomhed og ejendomsmæglernes pligter og ansvar.......Bogen er en systematisk gennemgang af lov om omsætning af fast ejendom, der regulerer ejendomsmægleres virke. Følgende emner er bl.a. behandlet: Hvem kan drive ejendomsmæglervirksomhed og ejendomsmæglernes pligter og ansvar....

Thermo-Mechanical Model of a TIG Welding Process for the Aircraft Industry

Directory of Open Access Journals (Sweden)

Hojny M.

2013-12-01

Full Text Available Spawanie metodą TIG jest jedną z ważniejszych metod używanych w przemyśle lotniczym. Wiele komponentów samolotu powstaje dzięki tej metodzie. Model termo-mechaniczny wspomnianego procesu jest konieczny do dokładnej analizy zjawisk powstających podczas procesu. W prezentowanej pracy opracowano model termo-mechaniczny w kontekście analizy deformacji spawanych elementów. Porównanie otrzymanych wyników na drodze symulacji z wynikami eksperymentalnymi wykazało poprawne odwzorowanie zjawisk zachodzących podczas procesu spawania.

Fermentering af korn øger fordøjeligheden af næringsstoffer

DEFF Research Database (Denmark)

Pedersen, Anni Øyan; Jørgensen, Henry; Bach Knudsen, Knud Erik

2010-01-01

foderblandingerne med ikke-fermentet korn var dog lavere end normalt, hvilket kan have påvirket resultaterne, så effekten af fermentering er større i dette forsøg, end hvad der normalt kan forventes. Kornet var groft formalet (ca. 30 % under 1 mm), hvilket kan have påvirket resultaterne. Ved finere formaling af...

Bilag til forskningsoversigt - Effekterne af Cooperative Learning

DEFF Research Database (Denmark)

Larsen, Lea Lund

Ved en opsamling af de empiriske studier vedrørende effekten af CL inden for voksenundervisningsfeltet ses en overvægt af studier, som rapporterer en positiv effekt af CL i forhold til de voksne lærendes faglige udbytte. En meta-analyse over 168 amerikanske undersøgelser på universitetsniveau vis...

Læring som improviseret udvikling af praksis

DEFF Research Database (Denmark)

Brinck, Lars

2010-01-01

Med afsæt i forfatterens fænomenografiske studie af amerikanske musikeres oplevelse af det at jamme diskuterer artiklen, hvorvidt jam-bandets spontant improviserende praksis kan give ny forståelse af rytmiske musikeres læring som et overordnet socialt fænomen. Ved at betragte jam-bandets praksis i...

Hvorfor lejere bliver sat ud af deres bolig

DEFF Research Database (Denmark)

Nielsen, Torben Heien; Christensen, Gunvor

Antallet af lejere, der bliver sat ud af deres bolig, er steget fra 1499 i 2002 til 2589 i 2006. Lejere kan blive sat ud af deres bolig, hvis de ikke betaler deres husleje til tiden, eller hvis de ikke overholder husordenen det sted de bor. Denne rapport beskriver årsager til, at lejere bliver sat...... ud af deres boliger og baggrunden for stigningen i antallet af udsættelser. desuden beskriver rapporten konsekvenser af en udsættelse og kommer med en række anbefalinger til indsatsområder. Af afgørende betydning for, at lejere bliver sat ud af deres bolig, er lav indkomst, lavt rådighedsbeløb, stor...

Enzymatisk omestring til produktion af biodiesel

DEFF Research Database (Denmark)

Fjerbæk, Lene

2007-01-01

  Biodiesel er i dag sammen med bioethanol et bud på, hvordan transportsektoren kan nedbringe sin netto CO2-emission til atmosfæren og lagrene af fossilt brændstof kan strækkes. På verdensplan forventes der en produktion af biodiesel på 7,9 mio. tons i 2007. Ved den industrielle fremstilling af...... biodiesel benyttes i dag kemiske katalysatorer såsom H2SO4, NaOH, MeONa eller KOH, der efterfølgende fjernes fra den producerede biodiesel med store mængder vand og derved produceres store mængder spildevand. Ved at benytte enzymer i processen kan man reducere mængden af spildevand, der skal renses. Enzymer...... benyttes ikke i de eksisterende processer, men det forventes, at udviklingen af processerne vil øge deres anvendelse i biodieselproduktion. I artiklen præsenteres fordele og ulemper ved anvendelse af enzymer til biodiesel produktion....

Anvendelse af genmodificerede planter

DEFF Research Database (Denmark)

Møller, F.

I rapporten vurderes mulighederne for at gennemføre velfærdsøkonomiske analyser af anvendelsen af genmodificerede planter. Der gøres rede for kravene til konse-kvensbeskrivelsen og for mulighederne for at prissætte såvel de markedsrelaterede som de ikke-markedsrelaterede konsekvenser. Mulighederne...

Fundering af mindre bygninger

DEFF Research Database (Denmark)

Larsen, J.; Ballisager, C.C.

Denne SBI-anvisning indeholder en gennemgang af de jordbunds- og grundvandsforhold, som er bestemmende for funderingen af en bygning. Specielt gennemgås de betingelser, der skal være opfyldt, for at man på forsvarlig måde kan fundere en mindre bygning i traditionel udformning. Publikationen...

TIG-dressing of High Strength Steel Butt Welded Connections. Part 1 : Weld Toe Geometry and Local Hardness

NARCIS (Netherlands)

Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

2014-01-01

This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

TIG-dressing of high strength steel butt welded connections - Part 1: weld toe geometry and local hardness

NARCIS (Netherlands)

Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

2013-01-01

This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

Udvikling af vejledningspraksis i kurser for undervisere i brugen af blended learning-aktiviteter

DEFF Research Database (Denmark)

Stenalt, Maria Hvid; Wichmann-Hansen, Gitte; Rossen, Dorte Sidelmann

Hvert semester tilbyder Center for Undervisning og Læring (CUL) ved School of Business and Social Sciences ved Aarhus Universitet et 1-årig langt kompetenceudviklingsforløb i brugen af blended learning for lektorer og professorer. I løbet af denne periode skal deltagerne gennemføre et indledende...... blended learning-kursusforløb på 5 uger efterfulgt af en udviklings- og afprøvningsfase. Som afslutning skal deltagerne skrive en refleksionsrapport. Forløbet indebærer to vejledningsmøder med en eller flere af de undervisningsudviklere fra CUL, der er ansvarlige for forløbet: 1) Et individuelt...... vejledningsmøde, hvor deltagerne skal finde frem til, hvordan de vil eller kan omlægge deres undervisning til blended learning og 2) et kollektivt vejledningsmøde efter første udviklingsfase, hvor deltagerne modtager feedback på deres igangværende udviklingstiltag fra gruppemedlemmer og undervisningsudviklere. Et...

TIG AISI-316 welds using an inert gas welding chamber and different filler metals: Changes in mechanical properties and microstructure

Energy Technology Data Exchange (ETDEWEB)

Pascual, M.; Salas, F.; Carcel, F.J.; Perales, M.; Sanchez, A.

2010-07-01

This report analyses the influence of the use of an inert gas welding chamber with a totally inert atmosphere on the microstructure and mechanical properties of austenitic AISI 316L stainless steel TIG welds, using AISI ER316L, AISI 308L and Inconel 625 as filler metals. When compared with the typical TIG process, the use of the inert gas chamber induced changes in the microstructure, mainly an increase in the presence of vermicular ferrite and ferrite stringers, what resulted in higher yield strengths and lower values of hardness. Its effect on other characteristics of the joins, such as tensile strength, depended on the filler metal. The best combination of mechanical characteristics was obtained when welding in the inert gas chamber using Inconel 625 as filler metal. (Author). 12 refs.

Videoanalyse af social interaktion

DEFF Research Database (Denmark)

Igennem de sidste 40 år er videooptagelser af praksis blevet anvendt som et redskab i forskning af social interaktion inden for f.eks. læring, design, mediering, kommunikationstræning og i sundhedsvæsenet. Videoanalyse af social interaktion giver et stærkt metodisk, teoretisk og praktisk blik ind i...... videoanalyse og viser, hvordan man som forsker og studerende kan bruge videoanalyse til at undersøge social interaktion. Bogens temaer og spørgsmål udgør således en grundsten i arbejdet med videoanalyse på professions-, universitets- og forskeruddannelser såvel som i forskning mere generelt og omfatter: - de...

Digital innovation af folkeskolernes åbenhed og sammenlignelighed

DEFF Research Database (Denmark)

Andersen, Kim Normann; Henriksen, Helle Zinner; Agger Nielsen, Jeppe

2013-01-01

Denne artikel præsenterer en normativ model (Public Sector Process Rebuilding, PPR), som kan indfange, hvor innovativt offentlige organisationer anvender digitale løsninger. Optag af digital innovation anskues ofte i litteraturen binært – enten er innovationen anskaffet eller ikke anskaffet. Vores...... argument er imidlertid, at optag af digitale innovationer kan gradbøjes. Vores sigte er derfor at få fokus væk fra anskaffelse og mere i retning af udnyttelse af digitaliseringen med henblik på at skabe forbedring af kerneydelserne og gavne slutbrugerne. Med empirisk afsæt i danske folkeskolers tolkning af...

Fluorerede stoffer i mademballage af pap og papir

DEFF Research Database (Denmark)

Trier, Xenia; Cederberg, Tommy Licht; Jensen, Lisbeth Krüger

andre typer af madbokse. Prøverne er blevet analyseret for flere forskellige typer af fluorerede stoffer, der anvendes til at imprægnere disse typer af emballager, så de ikke suger fedt eller vand. I ingen af prøverne er der fundet indhold af fluorerede stoffer, der overstiger analysemetodens...

Aspekter af integrationsindsatsen i 6 kommuner

DEFF Research Database (Denmark)

Rosdahl, Anders

Dette arbejdspapir præsenterer resultaterne af en mindre kvalitativ undersøgelse af kommuners indsats for at bringe nyankomne flygtninge og indvandrere i beskæftigelse. Undersøgelsen er en opfølgning på en kvantitativ benchmarkanalyse, som er gennemført af Amternes og Kommunernes Forskningsinstit...

Modelanalyser af mobilitet og miljø

DEFF Research Database (Denmark)

Christensen, Linda; Gudmundsson, Henrik

Begrebet bæredygtig transport diskuteres og ved hjælp af persontrafikmodellen ALTRANS belyses mulighederne for at fremme bæredygtig udvikling gennem en række scenarier. Desuden præsenteres en mere detaljeret analyse af ændringer i CO2-belastningen ved forbedring af den kollektive trafiks servicen...

Boligboblen pustes op af bankerne

DEFF Research Database (Denmark)

Ravn, Ib

2017-01-01

Den aktuelle boligboble blæses i vejret af bankerne, der gennem opkøb af realkreditobligationer skaber nye penge og dermed presser boligpriserne i vejret - en kreditfinansieret bolig- eller finansboble....

Domesticeringen af Ford i Danmark:Den kulturelle tilegnelse af Ford og fordismen, 1920-1940

OpenAIRE

Wagner, Michael

2009-01-01

Det amerikanske automobilfirma Ford Motor Company med hovedkvarter i Detroit begyndte at drive forretning i Danmark omkring 1906. De første aktiviteter blev konsolideret samme år ved udnævnelsen af motorforhandleren F. Bülow & Co. til salgsagent i Danmark og importør af Ford automobiler til det skandinaviske marked. Dermed havde Ford tidligt fået et stærkt fodfæste i Nordeuropa, som udviklingen i salget af Ford autobiler de næste årtier til fulde skulle demonstrere. Ford Motor Company er ...

Sygeplejestuderendes brug af portfolio i klinisk undervisning

DEFF Research Database (Denmark)

Hjorth, Anne Charlotte Overgaard; Bruhn, Helle

2014-01-01

Brugen af portfolio var mangelfuld, men et udviklingsprojekt i samarbejde med den kommunale sygepleje motiverede både sygeplejestuderende og kliniske vejledere til at anvende læringsdelen af portfolio aktivt.......Brugen af portfolio var mangelfuld, men et udviklingsprojekt i samarbejde med den kommunale sygepleje motiverede både sygeplejestuderende og kliniske vejledere til at anvende læringsdelen af portfolio aktivt....

Monitering, modellering og miljøvurdering af fuldskala afværge af TCE fourening ved stimuleret reduktiv deklorering

DEFF Research Database (Denmark)

Westergaard, Claus; Lemming, Gitte; Janniche, Gry Sander

På Sortebrovej 26 i Tommerup blev der i 2006 gennemført afværgeforanstaltninger ved stimuleret reduktiv deklorering (SRD) ved injektion af donor og bakterier i kildeområdet med henblik på at oprense en forurening med TCE. Kildeområdet befinder sig 10-20 m u. t. i sandet og opsprækket moræneler...... gunstige forhold for nedbrydning af de klorerede ethener ved reduktiv deklorering. Der ses da også en klar dominans af nedbrydningsprodukterne DCE og VC samt ethen og ethan i grundvandet. I nogle boringer, ses dog en stagnerende omsætning af TCE og DCE i grundvandet. Årsagen her til kan være, at donoren...... da også fordoblet fra 2008 til 2010. Der er observeret zoner med betydelig omsætning af TCE, hvor cis-DCE dominerer, og der ses generelt VC og ethen centralt i disse zoner. Koncentrationsniveauet af fermenteringsprodukter er aftaget og består ved en sandslire (B370 K1) alene af acetat og methan...

Vurdering af effekten af en vindmøllepark ved Overgaard på forekomsten af fugle i EF-fuglebeskyttelsesområde nr. 15

DEFF Research Database (Denmark)

Clausen, P.; Larsen, J. K.

forekomsten af en række arter der enten yngler eller raster inden for EF-fuglebeskyttelsesområdet, og er omfattet af EF-fuglebeskyttelsesdirektivets bilag I. Det drejer sig om arterne skarv Phalacrocorax carbo sinensis, blå kærhøg Circus cyaneus, hjejle Pluvialis apricaria, brushane Philomachus pugnax, klyde...

Selektiv avl af racehunde og -katte

DEFF Research Database (Denmark)

Sandøe, Peter; Meyer, Iben Helene Coakley; Fredholm, Merete

2014-01-01

Dette kapitel ser nærmere på de velfærdsmæssige problemstillinger, der opstår som følge af måden, hvorpå racehunde og -katte påvirkes gennem selektiv avl. Først beskrives, hvordan avlen af racehunde og -katte er organiseret. Dernæst gøres der rede for de dyrevelfærdsmæssige konsekvenser heraf....... Selektiv avl af hunde og katte tjener til at vedligeholde en stor racemæssig diversitet. De racemæssige forskelle gør det muligt for mennesker at vælge især hunde, der har nogle egenskaber, som passer til individuelle behov og ønsker. Desværre er der også en række bivirkninger for de pågældende dyrs...... problemer, som knytter sig til selektiv avl af racehunde og -katte, gennemgås og diskuteres mulige praktiske tiltag, som kan trække udviklingen i retning af at reducere forekomsten af disse problemer....

Tema 1: Programmering af robotenheder i grundskolen

Directory of Open Access Journals (Sweden)

Stine Ejsing-Duun

2016-01-01

Full Text Available I denne artikel undersøger vi potentialerne for at lære matematik gennem programmering af robotter. Vi foreslår en model med tre indbyrdes afhængige læringspotentialer, som programmering fordrer. Det omfatter elevens evne til at; (1 tænke i algoritmer, (2 producere viden og artefakter gennem brug af matematik og (3 foretage abstraktion og indkapsling. Programmering er blevet en del af grundskolens læringsmål i flere lande. I Danmark er programmering et læringsmål i forenklede fælles mål for Fysik/Kemi og desuden en del af den nationale undervisningsvejledning for matematik. En analyse af potentialerne i at anvende programmering i forbindelse med disse fag er derfor væsentlig. I denne artikel fokuserer vi på samspillet mellem matematik og programmering gennem litteraturstudier og analyse af empiriske situationer fra undervisning i programmering af LEGO Mindstorms. Teoretisk anvendes den instrumentelle tilgang til teknologi i matematikundervisning. Analysen viser en række måder, hvorpå didaktisk opmærksomhed på epistemisk forhandling kan understøtte læring af matematik gennem programmering.

Realisering af Vision 2020

DEFF Research Database (Denmark)

Bertelsen, Niels Haldor; Hansen, Ernst Jan de Place

Repræsentanter for byggesektoren har på 11 dialogmøder drøftet Erhvervs- og Byggestyrelsens "Vision 2020 - Byggeri med mening". Drøftelserne førte til formulering af en lang række initiativforslag til realisering af visionen. Den mest centrale udfordring bliver at reducere fejl og mangler i...... byggeriet. Branchen lægger også vægt på, at styringen af Vision 2020s reaisering sker i byggesektoren. Initiativforslagene er i rapporten samlet under 3 hovedområder. Det første hovedområde lægger vægt på bygningerne, brugerbehov og det globale samfund. Det andet omhandler processen og leverancesystemet...

Fatigue Behavior of Inconel 718 TIG Welds

Science.gov (United States)

Alexopoulos, Nikolaos D.; Argyriou, Nikolaos; Stergiou, Vasillis; Kourkoulis, Stavros K.

2014-08-01

Mechanical behavior of reference and TIG-welded Inconel 718 specimens was examined in the present work. Tensile, constant amplitude fatigue, and fracture toughness tests were performed in ambient temperature for both, reference and welded specimens. Microstructure revealed the presence of coarse and fine-grained heat-affected zones. It has been shown that without any post-weld heat treatment, welded specimens maintained their tensile strength properties while their ductility decreased by more than 40%. It was found that the welded specimens had lower fatigue life and this decrease was a function of the applied fatigue maximum stress. A 30% fatigue life decrease was noticed in the high cycle fatigue regime for the welded specimens while this decrease exceeded 50% in the low cycle fatigue regime. Cyclic stress-strain curves showed that Inconel 718 experiences a short period of hardening followed by softening for all fatigue lives. Cyclic fatigue response of welded specimens' exhibited cyclically stable behavior. Finally, a marginal decrease was noticed in the Mode I fracture toughness of the welded specimens.

Konceptuelt design og udvikling af Intergomus

DEFF Research Database (Denmark)

Ellebæk, P.; Pedersen, T.; Stendal, Karsten

1999-01-01

Denne rapport gennemgår udviklingsforløbet af et træningsapparat til genoptræning af læderede fingre. Rapporten omhandler kun den mekaniske del af udstyret. Opgaven er blevet løst i samarbejde med Ergoterapien på Køge Amtssygehus, Procare, Centret forAvanceret Teknologi og flere afdelinger på RIS...

Offentliggørelse af kursrelevante oplysninger

DEFF Research Database (Denmark)

Werlauff, Erik; Schaumburg-Müller, Peer

2013-01-01

Artiklen analyserer, særligt på baggrund af EU-Domstolens dom af 28. juni 2012 i C-19/11, Daimler AG, hvilken betydning en række mellemliggende trin, der fører frem til en kursrelevant og offentliggørelsespligtig begivenhed, har for tidspunktet for indtrædelsen af pligten til offentliggørelse. De...

Regulering af jødiske kroppe

DEFF Research Database (Denmark)

Schleicher, Marianne

2014-01-01

på teori dels af Michel Foucault om, hvordan kultur sikrer sin egen overlevelse ved at indsamle viden om bl.a. kroppe med henblik på at regulere brugen af dem, dels af Judith Butler, der bl.a. forklarer, hvordan kultur trods alt er åben for såkaldt subversion, idet det bidrager til at udvide og...

En litteraturbaseret gennemgang af mulige velfærdsmæssig betydning af brugen af længerevarende smertelindring til kalve efter afhorning

DEFF Research Database (Denmark)

Herskin, Mette S.; Nielsen, Bodil Højlund

2018-01-01

Dette er et udvidet sammendrag af vidensyntesen. Store dele af vidensyntesen er under review til et videnskabeligt tidsskrift, og kan derfor ikke offentliggøres elektronisk før denne proces er afsluttet. Den fulde rapport kan fremsendes pr. mail. Hvis du gerne vil have den tilsendt, så send en mail...

Kuratering af Samtidskunst

DEFF Research Database (Denmark)

Kuratering af Samtidskunst er den første bogudgivelse i Danmark, der fokuserer på kuratering som fag og praksis. Kuratering spiller en stadig større rolle i samtidskunsten. Bogen er en introduktion til skiftende forståelser af udstillings- og kuratorpraksisser og deres udfordringer, indkredset ge...... Kofod Olsen, Teresa Gleadowe, Helle Ryberg, Kirse Junge-Stevnsborg, Malene Natascha Ratcliffe, Pelin Uran, Jacob Fabricius, Lotte Juul Petersen, Jacob Lillemose, Solvej Helweg Ovesen, Frederikke Hansen & Tone Olaf Nielsen (kuratorisk aktion) og Temporary Services....

Evaluering af kollegial supervision

DEFF Research Database (Denmark)

Petersen, Anne Line Bjerre Folsgaard; Bager, Lene Tortzen; Jørgensen, Mette Eg

2015-01-01

Videoen er en evaluering af arbejdet med en metodisk tilgang til kollegial supervision på VIA Ergoterapeutuddannelsen gennem et par år. Evalueringen sætter fokus på selve metoden, der er anvendt til kollegial supervision. Derudover er der fokus på erfaringer og udbytte af at arbejde systematisk med...... kollegial supervision blandt undervisere på VIA Ergoterapeutuddannelsen....

Effekter af koordineret hjerneskaderehabilitering. Et systematisk litteraturreview

DEFF Research Database (Denmark)

Glintborg, Chalotte; Hansen, Tia G. B.

beskrevet. Der er ingen klar dansk definition af koordination. Begrebet bliver ofte brugt inkonsistent, og koordination er meget forskelligt tilrettelagt. Derfor kan man ikke generelt dokumentere, om koordinatorfunktioner er en sikker vej til forbedring af komplekse rehabiliteringsforløb. Sundhedsstyrelsen......Forskningsprojekt udvikler ny definition af begrebet koordination Som et led i forskningsprojektet ”Bio-psyko-sociale effekter af koordineret hjerneskaderehabilitering” er der udviklet en ny definition af koordinationsbegrebet. Forskningsprojektet ”Bio-psyko-sociale effekter af koordineret...... senhjerneskadeområdet – initiativer, der skal fremme en sammenhængende og helhedsorienteret rehabiliteringsindsats. Men hvad dækker begrebet koordination egentlig over? Det har et nyt forskningsprojekt set på og kommer med et bud på en ny definition. Dansk definition mangler Indholdet i koordination har været upræcist...

Modellering af elforbrug til netanalyse

DEFF Research Database (Denmark)

Østergaard, Jacob

I denne rapport undersøges mulighederne for at etablere en model for elforbruget, der kan anvendes ved analyser af det østdanske transmissionsnet. Rapporten henvender sig til ingeniører og beslutningstagere, der ønsker viden om betydningen af en nøjagtig elforbrugsmodel og om mulighederne for i p...... simuleringsresultater med mindre usikkerhed, og der opnås en integration mellem eksisterende systemer, idet data fra en række systemer bl.a. Panda, elforbrugsprognoser, elforbrugspaneler og stationsprognoser kan udnyttes til etableringen af en model....

Erfaringer fra nedrivning af boligblok i Rødbyhavn

DEFF Research Database (Denmark)

Eriksen, Søren Skibstrup; Hansen, Klaus; Krogh, Hanne

Denne meddelelse indeholder en beskrivelse af nedrivningen af et betonelementbyggeri. Der er foretaget en registrering af energiforbrug i forbindelse med nedrivningen og bortskaffelsen samt en registrering af de miljøbelastende stoffer i bygningsaffaldet. Inden bebyggelsen blev revet ned, blev de...

Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach

Science.gov (United States)

Maleque, M. A.; Bello, K. A.; Adebisi, A. A.; Dube, A.

2017-03-01

In this study, Taguchi design of experiment approach has been applied to assess wear behaviour of TiC composite coatings deposited on AISI 4340 steel substrates by novel powder preplacement and TIG torch melting processes. To study the abrasive wear behaviour of these coatings against alumina ball at 600° C, a Taguchi’s orthogonal array is used to acquire the wear test data for determining optimal parameters that lead to the minimization of wear rate. Composite coatings are developed based on Taguchi’s L-16 orthogonal array experiment with three process parameters (welding current, welding speed, welding voltage and shielding gas flow rate) at four levels. In this technique, mean response and signal-to-noise ratio are used to evaluate the influence of the TIG process parameters on the wear rate performance of the composite coated surfaces. The results reveal that welding voltage is the most significant control parameter for minimizing wear rate while the current presents the least contribution to the wear rate reduction. The study also shows the best optimal condition has been arrived at A3 (90 A), B4 (2.5 mm/s), C3 (30 V) and D3 (20 L/min), which gives minimum wear rate in TiC embedded coatings. Finally, a confirmatory experiment has been conducted to verify the optimized result and shows that the error between the predicted values and the experimental observation at the optimal condition lies within the limit of 4.7 %. Thus, the validity of the optimum condition for the coatings is established.

Microstructural studies and wear assessments of Ti/TiC surface composite coatings on commercial pure Ti produced by titanium cored wires and TIG process

Energy Technology Data Exchange (ETDEWEB)

Monfared, A., E-mail: amirmonfared25@yahoo.com [Department of Materials Science and Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of); Kokabi, A.H.; Asgari, S. [Department of Materials Science and Engineering, Sharif University of Technology, Tehran (Iran, Islamic Republic of)

2013-01-15

Tungsten Inert Gas (TIG) process and titanium cored wires filled with micro size TiC particles were employed to produce surface composite coatings on commercial pure Ti substrate for wear resistance improvement. Wire drawing process was utilized to produce several cored wires from titanium strips and titanium carbide powders. Subsequently, these cored wires were melted and coated on commercial pure Ti using TIG process. This procedure was repeated at different current intensities and welding travel speeds. Composite coating tracks were found to be affected by TIG heat input. The microstructural studies using optical and scanning electron microscopy supported by X-ray diffraction showed that the surface composite coatings consisted of {alpha} Prime -Ti, spherical and dendritic TiC particles. Also, greater volume fractions of TiC particles in the coatings were found at lower heat input. A maximum microhardness value of about 1100 HV was measured which is more than 7 times higher than the substrate material. Pin-on-disk wear tests exhibited a better performance of the surface composite coatings than the untreated material which was attributed to the presence of TiC particles in the microstructure. -- Highlights: Black-Right-Pointing-Pointer Ti/TiC composite coatings were produced on the CP-Ti. Black-Right-Pointing-Pointer Titanium cored wire and TIG process were employed for production of the coatings. Black-Right-Pointing-Pointer Decreasing heat input, increased the volume fraction of TiC in the coatings. Black-Right-Pointing-Pointer The maximum microhardness obtained in the lowest heat input. Black-Right-Pointing-Pointer The wear resistance of the coatings improved due to the formation of TiC particles.

The influence of laser pulse waveform on laser-TIG hybrid welding of AZ31B magnesium alloy

Science.gov (United States)

Song, Gang; Luo, Zhimin

2011-01-01

By dividing laser pulse duration into two parts, three kinds of laser waveforms are designed, including a high power density pulse (HPDP) laser in a short duration set at the beginning of the laser waveform. This paper aims to find out the laser pulse waveform and idiographic critical values of HPDP, which can affect the magnesium penetration in laser-tungsten inert gas (TIG) hybrid welding. Results show that when the laser pulse duration of HPDP is not more than 0.4 ms, the welding penetration values of lasers with HPDP are larger than otherwise. Also, the welding penetration values of laser with HPDP have increased by up to 26.1%. It has been found that with HPDP, the laser can form the keyhole more easily because the interaction between laser and the plate is changed, when the TIG arc preheats the plate. Besides, the laser with high power density and short duration strikes on the plates so heavily that the corresponding background power can penetrate into the bottom of the keyhole and maintain the keyhole open, which facilitates the final welding penetration.

Overvågning af karplanter i Suserup Skov

DEFF Research Database (Denmark)

Wind, P.

1999-01-01

Vejler, i alt ca. 5.500 ha. Feltstationen blev oprettet i 1978, og siden har observatørerne registreret fuglelivet i Vejlerne og de omgivende arealer foruden vandstand, saltholdighed og drift af området. Tipperne ligger i den sydlige del af Ringkøbing Fjord. Fuglelivet blev fredet i 1898. Reservatet blev...... en samlet fredning af Vadehavet, omfatter øen Langli på 80 ha og vandarealer på i alt ca. 8.000 ha. Øen består af klitter og salte strandenge. Vandområdet er præget af tidevand, hvor vidtstrakte sand- og mudderflader og spredte muslingebanker er synlige ved lavvande. Vorsø ligger i Horsens Fjord...... saltholdighed i Ringkøbing Fjord bevirker, at vandplanter vokser dårligt eller forsvinder. Vandplanter udgør en væsentlig del af føden for visse andefugle og kan derfor have stor betydning for antallet af rastende fugle. Der blev registreret lave antal af knortegå, gråand, pibeand og krikand. Af blishøne blev...

Miljørigtig ombygning af Mallinggård

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place

2002-01-01

Resume af rapport om den byggetekniske anvendelse af alternativ isolering ved en ombygning af Mallinggårds lade til undervisningslokaler, udarbejdet af Bent Møller fra Rudolf Steiner Skolen i Skanderborg under Energistyrelsens udviklingsprogram "Miljø- og arbejdsmiljøvenlig isolering"...

Et nationalt studie af bankrøveri

DEFF Research Database (Denmark)

Hansen, Maj; Elklit, Ask

11,1 % (n = 41) af ASD og seks måneder efter røveriet led 6,2 % (n = 23) af PTSD. Begge prævalenser var begrænset af kravet om undgåelsessymptomer (ASD uden undgåelse: 14 %, PTSD uden undgåelse: 17,8 %), men ASD diagnosen var især begrænset af kravet om dissociationssymptomer (ASD uden dissociation......: 26,7 %). Hierarkisk regressionsanalyse viste, at 51 % af variansen i PTSD sværhedsgrad blev forklaret af peritraumatisk dissociation, ASD sværhedsgrad, emotionel coping og negative tanker om egen person og evner. ASD sværhedsgrad var den stærkeste prædiktorer for PTSD sværhedsgrad og forudsagde alene...... diagnoser. Særligt ASD sværhedsgrad og negative tanker om egen person og evner synes at kunne forudsige PTSD sværhedsgrad efter bankrøveri. Det anbefales derfor, at ”Acute Stress Disorder Scale” anvendes til at screene for PTSD efter bankrøveri. Fremtidig forskning anbefales at fokusere på udvikling af...

Typebestemmelse af de danske M. bovis stammer

DEFF Research Database (Denmark)

Kokotovic, Branko

Mycoplasma bovis er en af de mest betydningsfulde mykoplasma i kvægbruget på verdensplan. Bakterien findes oftest i forbindelse med mastitis, lunge- og ledbetændelse, men andre kliniske manifestationer kan også forekomme. Der findes ikke præcise, nyere beregninger over konsekvenser af M. bovis...... relateret sygdomme, men det anses, at infektionen hvert år globalt set pålægger en økonomisk byrde til kvægbruget i en multimillion skala. M. bovis blev for første gang påvist i Danmark i 1981 og gennem 1980’erne har bakterien forårsaget store udbrud af mastitis. I de følgende årtier blev bakterien isoleret...... sporadisk fra mange forskellige kvægbesætninger, men på trods af en tilsyneladende stigende forekomst i 1990’erne, blev der ikke registret omfattende sundhedsmæssige problemer som følge af M. bovis smitte. Siden 2011 er M. bovis dog kommet i fokus igen på grund af alvorlige udbrud af især ledbetændelse, men...

E1AF degradation by a ubiquitin-proteasome pathway

International Nuclear Information System (INIS)

Takahashi, Akiko; Higashino, Fumihiro; Aoyagi, Mariko; Yoshida, Koichi; Itoh, Miyuki; Kobayashi, Masanobu; Totsuka, Yasunori; Kohgo, Takao; Shindoh, Masanobu

2005-01-01

E1AF is a member of the ETS family of transcription factors. In mammary tumors, overexpression of E1AF is associated with tumorigenesis, but E1AF protein has hardly been detected and its degradation mechanism is not yet clear. Here we show that E1AF protein is stabilized by treatment with the 26S protease inhibitor MG132. We found that E1AF was modified by ubiquitin through the C-terminal region and ubiquitinated E1AF aggregated in nuclear dots, and that the inhibition of proteasome-activated transcription from E1AF target promoters. These results suggest that E1AF is degraded via the ubiquitin-proteasome pathway, which has some effect on E1AF function

Depressive patienters oplevelse af at modtage ECT

DEFF Research Database (Denmark)

Jensen, Christine Damsbo

Dette studie handler om, hvordan det opleves for den voksne depressive patient at gennemgå et ECT-behandlingsforløb (electroconvulsive therapy). Formålet med projektet er dels at undersøge, hvordan processen omkring ECT-behandlingen udspiller sig og dels at undersøge patienternes oplevelse......, reaktioner og tanker omkring ECT-behandlingen. Studiet bygger på den eksisterende viden om patienters oplevelse af ECT. Metoden er feltforskning med deltagende observation og etnografisk interview. Dette suppleres af to spørgeskemaer. Der blev inkluderet 8 patienter i undersøgelsen. Analysen udspringer af...... konstruktivistisk epistemiologisk vinkel. Ved en teoristyret analyse fremkom 2 overordnede temaer: Anspændthed og tryghed. Disse temaer blev behandlet i en procesorienteret forståelse af ECT-forløbet. Denne proces bestod af: Betingelser, interaktion og konsekvenser. Diskussionen er en kritisk diskussion af fund og...

Overvågning af orkidéer 2000

DEFF Research Database (Denmark)

Wind, P.

resultaterne af orkidéovervågningen (Wind 2001). Hertil kommer præsentationen af projektet og dets resultater efter forløbet af de første tre år (Løjtnant 1991a) og en bearbejdning af projektets resultater for årene 1987-1995 (Wind 1997). I nærværende rapport undersøges skov-hullæbe for en eventuel sammenhæng...... mellem skudanlæggelsen udtrykt ved antallet af blomstrende og vegetative skud i et givet år og nedbørsmængder i august og september året før. Det er en udbredt antagelse at der er en sammenhæng mellem skudanlæggelse og mængden af nedbør det foregående år. Undersøgelser af skov-hullæbe populationer i...... truet og sårbar samt de to arter der er omfattet af Habitatdirektivets bilag 2. I 2000 kan det i forhold til 1999 konstateres at der i 15 bestande er optalt et øget antal skud. I 11 bestande er der noteret en nedgang i antallet af skud sammenlignet med optællingerne i 1999. Af disse er der 2 be...

Digital visualisering i udbygning af Roskilde Universitetscenter

DEFF Research Database (Denmark)

Sørensen, Nils Lykke

Rapporten beskriver tre forsøg med 3D-visualisering i forbindelse med konkurrencer vedrørende udbygning af Roskilde Universitetscenter. Første forsøg var en metode til hurtigt at skabe en række digitale modeller i højt abstraktionsniveau. Forsøget resulterede i 15 små animationer, der blev benyttet...... af dommerkomiteen til volumenstudier af bygningskonkurrencens indsendte forslag. Andet forsøg var afprøvning af et modelleringsarbejde i lavere abstraktionsniveau, som resulterede i en animation af vinderprojektet. I sidste forsøg blev de praktiske erfaringer fra de to første forsøg implementeret hos...

Ekstraktion af æteriske olier fra oregano

DEFF Research Database (Denmark)

Ellitsgaard Jakobsen, Jens; Ankerfeldt, Dorte; Jensen, Morten Busch

2010-01-01

med keratin - Ammoniakforurening reduceres med ny teknologi - Genvinding og genanvendelse af ammoniak fra spildevand og husdyrgødning - Ginseng - en virkningsfuld medicinplante - Ekstraktion af æteriske olier fra oregano "Biotek" er udviklet med udgangspunkt i originalartikler udarbejdet af forskere...

Børn af veteraner

DEFF Research Database (Denmark)

Frederiksen, Signe; Lausten, Mette

Siden starten af 1990’erne har Danmark sendt over 30.000 soldater og andet personel på internationale missioner – langt de fleste til Eks-Jugoslavien, Afghanistan og Irak. Denne undersøgelse handler om de børn, hvis fædre har været udsendt på militære missioner i udlandet. For hvordan håndterer...... spørgsmål er fokus for undersøgelsen. Undersøgelsen bygger på en spørgeskemaundersøgelse blandt børn af veteraner på henholdsvis 7, 11 og 15 år. Undersøgelsen er gennemført for og i samarbejde med Veterancentrets Videncenter, som er en del af Forsvarsministeriets Personalestyrelse....

Tællinger af vandfugle i Danmark 1998-99

DEFF Research Database (Denmark)

Pihl, S.; Laubek, B.

1999-01-01

Denne rapport præsenterer Miljø- og Energiministeriets seks feltstationer med beskrivelse af deres historie, naturforhold og overvågningsprogram. Resultaterne af fugleobservationer i 1997 beskrives i sammenhæng med tidligere års udvikling. Desuden præsenteres resultater af tre undersøgelser af he...

Om den sociale og symbolske funktion af uddannelsesevalueringer

DEFF Research Database (Denmark)

Nørholm, Morten

Ph.d.-afhandlingen handler om evalueringer, om evalueringer af uddannelse med et fokus og perspektiv som er begrænset til en afdækning af forhold om evalueringer, til en formulering af en teori om evalueringer. I afhandlingens analyser og diskussioner anvendes teorier af Émile Durkheim, Pierre...

Delegation af lovgivningsmagt: risiko for ringere regulering?

DEFF Research Database (Denmark)

Pedersen, Morten Jarlbæk; Christensen, Geert Laier; Ravn, Jacob

2016-01-01

kortsigtetede, politiske incitamenter. Samtidig underlægges delegation ikke samme grad af kvalitetskontrolmekanismer som almindelig lovgivning; dette kunne ellers kompensere for den mere politiserede delegation. En øget brug af bekendtgørelser kan derfor betyde en stigende risiko for regulering af lavere...

Biotransformering af pyren i havbørsteormen Nereis virens

DEFF Research Database (Denmark)

Jørgensen, Anne; Giessing, Anders; Juul Rasmussen, Lene

føden og ved overførsel over epithelet. Graden af systemisk akkumulering af PAHer afhænger af optaget men ligeledes af effektiviteten af biotransformering i den pågældende organisme. N. virens er kendt for effektivt at biotransformere PAHer. I nærværende undersøgelse blev biotransformering undersøgt med......-glucuronid er den fase II metabolit der primært produceres ved biotransformering af pyren. Dette indikerer at de vigtigste enzymer i biotransformering af pyren i N. virens er CYP enzymer og glucuronosyl transferase enzymer....

Danskernes brug af nyhedsmedier 2018

DEFF Research Database (Denmark)

Schrøder, Kim Christian; Ørsten, Mark; Eberholst, Mads Kæmsgaard

Hvis der er ét begreb, der i 2018 er blevet slået fast med syvtommersøm i den offentlige debat verden over, så er det ’fake news’! Bekymringen over fænomenet er vokset eksplosivt, samtidig med at det er blevet mere og mere uklart, hvad ’fake news’ egentlig dækker over. I dette års analyse af...... brugen af nyhedsmedier sætter Reuters Institute Digital News Report, og også denne specialrapport om Danmark, analytisk fokus på ’fake news’ og kaster lys over borgernes opfattelse af fænomenet på en måde, så vi får nuancerne i det komplekse begreb med. Et andet emne, der er blevet diskuteret...... for fake news og egne oplevelser af fake news, og danskernes viden om, hvordan nyheder bliver lavet (nyheds-literacy)....

Comparative study on laser welding and TIG welding of semi-solid high pressure die cast A356 aluminium alloy

CSIR Research Space (South Africa)

Govender, G

2007-07-01

Full Text Available components. The low porosity levels in SSM high pressure die castings (HPDC) improves the weldability of these components. The aim of the current research was to perform a comparative study of laser and TIG welding of SSM HPDC aluminium alloy A356. SSM...

Kontrol af konventionelle våben i Europa

DEFF Research Database (Denmark)

Hoffmann, Rune; Kierulf, John; Pradhan-Blach, Flemming

Rapporten indledes med en historisk gennemgang af tilblivelsen og udviklingen af Traktat om Konventionelle Væbnede Styrker i Europa (CFE), som blev iværksat af NATO og det tidligere Warszawapagten i 1973. Traktaten fastsætter et loft for antallet af kampvogne, pansrede kampkøretøjer, artilleripje...

Kommentarer til love og ændringer af love

DEFF Research Database (Denmark)

Møgelvang-Hansen, Peter

2002-01-01

folkeoplysende foreningsarbejde og Folkeuniversitetet (folkeoplysningsloven) og ophævelse af lov om daghøjskoler m.v. og lov om den fri ungdomduddannelse samt ændring af lov om refusion af udgifter til uddannelse i forbindelse med aktivering m.m. samt ændring af forskellige love (Reform for daghøjskolerne...

Bakteriesensor til on-line identifikation/bestemmelse af mikrobiel drikkevandskvalitet

DEFF Research Database (Denmark)

Bentien, Anders; Tilsted Mogensen, Claus; Østergaard, Else-Marie

Over det meste af verden defineres den mikrobielle drikkevandskvalitet primært på baggrund af grænseværdier for E. coli, coliforme bakterier og kimtal. Anvendelsen af den totale bakteriekoncentration til bestemmelse af mikrobiel drikkevandskvalitet er (af historiske årsager) ikke udbredt og primært...

Intakes of thorium while using thoriated tungsten electrodes for TIG welding.

Science.gov (United States)

Ludwig, T; Schwass, D; Seitz, G; Siekmann, H

1999-10-01

Thoriated electrodes are used in TIG welding. TIG welders, along with persons who grind thoriated electrodes and persons located near relevant welding and grinding sites, might be at risk of thorium intake. The isotopes of radiological relevance are 232Th, 230Th, and 228Th. The studies described in the literature do not provide a consistent picture of the actual hazards, and changes in European and German radiological protection laws have now made it necessary to determine the risks. To accomplish this, a field test was conducted under real working conditions in 26 different welding shops. The airborne activity generated through welding, and through grinding of electrodes, was measured using personal air samplers. Stationary samplers were also used. The filters' samples were evaluated by means of direct alpha spectrometry with proportional counting and by means of gamma spectrometry following neutron activation. The results clearly showed that considerable intake can occur during both alternating-current welding and electrode grinding, if no suction systems are used. The range of 232Th intakes to welders were estimated from 0.1 Bq y(-1) to 144 Bq y(-1) during welding and from 0.02 Bq y(-1) to 30.2 Bq y(-1) during grinding. In 6 of the 26 cases the recent annual limit on intake derived from the most recent ICRP publications was exceeded--in the worst case it was exceeded by a factor of 10--if it is assumed that the persons studied were not exposed workers (not routinely monitored for radiation exposure). When the significantly more restrictive German limits are applied, the amounts by which the limits were exceeded were even greater. Because many qualified welders have very long careers, the risks can thus be considerable. The paper also discusses parameters that influence exposure, and it presents a catalogue of recommended measures for dosage reduction.

Genlyden af et nej

DEFF Research Database (Denmark)

Östman, Lars

2011-01-01

Europa og den vestlige verden er ramt af en økonomisk krise. Det er en krise, der er anderledes, end den vi har været vant til fx fra 1980'erne.......Europa og den vestlige verden er ramt af en økonomisk krise. Det er en krise, der er anderledes, end den vi har været vant til fx fra 1980'erne....

Optisk scanning af spørgeskemaer

DEFF Research Database (Denmark)

Paulsen, Aksel

/ 1000 felter= 0.370 (95% CI: 0.160-0.729), (p= 0.020)). Der var ingen statistisk forskel mellem optisk scanning (fejl/ 1000 felter= 0.046 (95% CI: 0.001-0.258)) og manuel dobbelt indtastning (p=1.000). Konklusioner: Optisk scanning er et godt alternativ til manuel dobbelt indtastning for spørgeskema med......Formål og baggrund: Patient rapporterede outcomes i form af spørgeskemaer bruges i øgende grad i sundhedssektoren både i klinisk praksis og forskning. Ofte bruges spørgeskemaer i papirformat. Manuel dobbelt indtastning er defineret som guld standard for overføring af data til et elektronisk format......, men processen er tidkrævende. Optisk scanning af spørgeskemaer med automatisk registrering af svar kan være et alternativ, men videre validering af metoden er nødvendig. Design: 200 patienter blev tilfældigt udvalgt fra en kohorte på 5777 patienter der tidligere havde svaret på to forskellige...

En analyse af potentialet for salg af fødevarer gennem Internettet i Danmark og England

DEFF Research Database (Denmark)

Ramus, Kim Bjarne

2001-01-01

I Kim Ramus ph.d.-projekt gennemføres en undersøgelse af danske og britiske forbrugeres holdninger og præferencer til handel med fødevarer på Internettet, hvor formålet er at finde potentialet for salg af fødevarer online. Internettet er ganske udbredt i begge lande, men England er dog et godt st...... stykke foran Danmark med supermarkedskæden Tesco i spidsen, når det gælder salg af fødevarer. I Danmark er der endnu ingen landsdækkende kæder, som for alvor er gået i gang med at sælge fødevarer online.......I Kim Ramus ph.d.-projekt gennemføres en undersøgelse af danske og britiske forbrugeres holdninger og præferencer til handel med fødevarer på Internettet, hvor formålet er at finde potentialet for salg af fødevarer online. Internettet er ganske udbredt i begge lande, men England er dog et godt...

Estudo da Técnica Tig Keyhole por Meio do Análise Comparativo entre Duas Tochas de Alta Produtividade na União de Chapas de Aço Carbono de Meia Espessura

Directory of Open Access Journals (Sweden)

Erick Alejandro González Olivares

2015-09-01

Full Text Available Resumo Na bibliografia de referência comum, a soldagem por meio da técnica Keyhole sempre foi associada a processos de soldagem com uma alta concentração de energia, como o processo Laser ou o processo Plasma. Novos avanços em tochas TIG estão mudando a forma em como o processo de soldagem TIG deveria ser considerado. Um exemplo desses novos avanços é a tocha comercialmente conhecida como Infocus, que segundo seus fabricantes a principal característica da tocha é a capacidade de concentração de energia na ponta do eletrodo, por médio de um aumento na potência de refrigeração do eletrodo, diferenciando à Infocus de uma tocha convencional TIG. Tal concentração de energia permite à tocha Infocus trabalhar com a técnica Keyhole. Portanto, é objetivo do presente trabalho estudar a factibilidade de uma tocha convencional TIG de usar a técnica Keyhole, com as mesmas condições de trabalho que a tocha comercialmente conhecida como Infocus. Através dos ensaios realizados foi possível confirmar que o processo TIG consegue trabalhar com a técnica Keyhole, sem necessidade de uma tocha com características especiais. Porém, o eletrodo da tocha Infocus possui uma vida maior, em comparação a um eletrodo convencional da mesma composição, aumentando a produtividade do processo.

Nye ledelsesudfordringer i forebyggelse af stress i videnarbejdet

DEFF Research Database (Denmark)

Andersen, Vibeke; Ipsen, Christine; Mogensen, Mette

arbejdssituation og muligheder for forebyggelse af arbejdsrelateret stress i vidensarbejdet. – Et kvalitaivt studie af arbejdsrelateret stress i vidensarbejdet. Lyngby, The Technical University of Denmark. Kärreman, Dan, Stefan Svenningson and Mats Alvesson (2003): The Return of the Machine Bureaucracy? Management......Afsættet for projektet ”Forebyggelse af stress i videnarbejdet – mellem begejstring og belastning” er, at der er behov for en ny forståelse af stress i det moderne arbejdsliv, for at kunne arbejde med stressforebyggelse blandt videnarbejdere. I dette paper tager vi udgangspunkt i begrebet...... mangetydighed/ambiguity som en karakteristik af videnarbejdet, da det stiller nogle helt nye udfordringer til hvordan ledelse af videnarbejdet skal foregå, når målet er at forebygge arbejdsrelateret stress. Vi karakteriserer videnarbejdet som mangetydigt og som Alvesson (2004) påpeger, udgør dilemmaerne i...

Nyttigt bidrag til professionalisering af revisionsudvalg

DEFF Research Database (Denmark)

Thomsen, Steen

2009-01-01

Anmeldelse af: KPMG. 2009, Audit Committee Institute. Revisionsudvalg i Praksis. 2. reviderede udgave.......Anmeldelse af: KPMG. 2009, Audit Committee Institute. Revisionsudvalg i Praksis. 2. reviderede udgave....

DVD anmeldelse - En Verden af Lyd og Musik

DEFF Research Database (Denmark)

Holck, Ulla

2006-01-01

Anmeldelse af DVD-udgivelse af Claus Bang (2005): En Verden af Lyd og Musik. Musikterapi for døve, hørehæmmede og multihandicappede børn og unge. Al tale med undertekst eller tegnsprogstolkning. DVD-boks med 3 stk. dobbeltlag DVD beregnet til afspilning på PC. Udgivet af Musikterapi-foreningen En...

En kvantitativ metode til analyse af radio

Directory of Open Access Journals (Sweden)

Christine Lejre

2014-06-01

Full Text Available I den danske såvel som den internationale radiolitteratur er bud på metoder til analyse af radiomediet sparsomme. Det skyldes formentlig, at radiomediet er svært at analysere, fordi det er et medie, der ikke er visualiseret i form af billeder eller understøttet af printet tekst. Denne artikel har til formål at beskrive en ny kvantitativ metode til analyse af radio, der tager særligt hensyn til radiomediets modalitet – lyd struktureret som et lineært forløb i tid. Metoden understøtter dermed både radiomediet som et medie i tid og som et blindt medie. Metoden er udviklet i forbindelse med en komparativ analyse af kulturprogrammer på P1 og Radio24syv lavet for Danmarks Radio. Artiklen peger på, at metoden er velegnet til analyse af ikke kun radio, men også andre medieplatforme samt forskellige journalistiske stofområder.

Degradation of AF1Q by chaperone-mediated autophagy

International Nuclear Information System (INIS)

Li, Peng; Ji, Min; Lu, Fei; Zhang, Jingru; Li, Huanjie; Cui, Taixing; Li Wang, Xing; Tang, Dongqi; Ji, Chunyan

2014-01-01

AF1Q, a mixed lineage leukemia gene fusion partner, is identified as a poor prognostic biomarker for pediatric acute myeloid leukemia (AML), adult AML with normal cytogenetic and adult myelodysplastic syndrome. AF1Q is highly regulated during hematopoietic progenitor differentiation and development but its regulatory mechanism has not been defined clearly. In the present study, we used pharmacological and genetic approaches to influence chaperone-mediated autophagy (CMA) and explored the degradation mechanism of AF1Q. Pharmacological inhibitors of lysosomal degradation, such as chloroquine, increased AF1Q levels, whereas activators of CMA, including 6-aminonicotinamide and nutrient starvation, decreased AF1Q levels. AF1Q interacts with HSPA8 and LAMP-2A, which are core components of the CMA machinery. Knockdown of HSPA8 or LAMP-2A increased AF1Q protein levels, whereas overexpression showed the opposite effect. Using an amino acid deletion AF1Q mutation plasmid, we identified that AF1Q had a KFERQ-like motif which was recognized by HSPA8 for CMA-dependent proteolysis. In conclusion, we demonstrate for the first time that AF1Q can be degraded in lysosomes by CMA. - Highlights: • Chaperone-mediated autophagy (CMA) is involved in the degradation of AF1Q. • Macroautophagy does not contribute to the AF1Q degradation. • AF1Q has a KFERQ-like motif that is recognized by CMA core components

Degradation of AF1Q by chaperone-mediated autophagy

Energy Technology Data Exchange (ETDEWEB)

Li, Peng; Ji, Min; Lu, Fei; Zhang, Jingru [Department of Hematology, Key Laboratory of Cardiovascular Remodeling and Function Research, Qilu Hospital, Shandong University, Jinan 250012 (China); Li, Huanjie; Cui, Taixing; Li Wang, Xing [Research Center for Cell Therapy, Key Laboratory of Cardiovascular Remodeling and Function Research, Qilu Hospital, Shandong University, Jinan 250012 (China); Tang, Dongqi, E-mail: tangdq@sdu.edu.cn [Research Center for Cell Therapy, Key Laboratory of Cardiovascular Remodeling and Function Research, Qilu Hospital, Shandong University, Jinan 250012 (China); Center for Stem Cell and Regenerative Medicine, The Second Hospital of Shandong University, Jinan 250033 (China); Ji, Chunyan, E-mail: jichunyan@sdu.edu.cn [Department of Hematology, Key Laboratory of Cardiovascular Remodeling and Function Research, Qilu Hospital, Shandong University, Jinan 250012 (China)

2014-09-10

AF1Q, a mixed lineage leukemia gene fusion partner, is identified as a poor prognostic biomarker for pediatric acute myeloid leukemia (AML), adult AML with normal cytogenetic and adult myelodysplastic syndrome. AF1Q is highly regulated during hematopoietic progenitor differentiation and development but its regulatory mechanism has not been defined clearly. In the present study, we used pharmacological and genetic approaches to influence chaperone-mediated autophagy (CMA) and explored the degradation mechanism of AF1Q. Pharmacological inhibitors of lysosomal degradation, such as chloroquine, increased AF1Q levels, whereas activators of CMA, including 6-aminonicotinamide and nutrient starvation, decreased AF1Q levels. AF1Q interacts with HSPA8 and LAMP-2A, which are core components of the CMA machinery. Knockdown of HSPA8 or LAMP-2A increased AF1Q protein levels, whereas overexpression showed the opposite effect. Using an amino acid deletion AF1Q mutation plasmid, we identified that AF1Q had a KFERQ-like motif which was recognized by HSPA8 for CMA-dependent proteolysis. In conclusion, we demonstrate for the first time that AF1Q can be degraded in lysosomes by CMA. - Highlights: • Chaperone-mediated autophagy (CMA) is involved in the degradation of AF1Q. • Macroautophagy does not contribute to the AF1Q degradation. • AF1Q has a KFERQ-like motif that is recognized by CMA core components.

Proposta de roteiro para a determinação das variáveis de soldagem do Processo TIG pulsado aplicado à soldagem de chapas finas Proposal of roadmap for determining the variables of pulsed TIG welding process applied to welding of thin plates

Directory of Open Access Journals (Sweden)

Tiago Vieira da Cunha

2013-03-01

Full Text Available Na soldagem TIG pulsada a corrente varia entre dois níveis bem definidos de energia numa determinada frequência, sendo, portanto, necessário a regulagem de um conjunto de variáveis composto pela corrente de pulso, tempo de pulso, corrente de base, tempo de base, além da velocidade de soldagem. Entretanto, apesar de ser uma técnica tão amplamente difundida, na prática estas variáveis de soldagem muitas vezes são reguladas de forma arbitrária. Isto pode conduzir ao uso ineficiente da pulsação da corrente quando considerado o resultado final da solda, bem como nos aspectos de produtividade. Diante desta carência, este trabalho tem por objetivo apresentar um roteiro desenvolvido com o intuito de suprir a necessidade prática de se estabelecer critérios para auxiliar a determinação das variáveis da soldagem TIG pulsada, tomando como premissa a largura desejada para o cordão de solda final, a sobreposição entre os pontos de solda que compõem o cordão e a velocidade de soldagem. Por fim, é apresentada uma aplicação deste roteiro na soldagem "bead on plate" de chapas de aço inox com 1,2 mm de espessura.In pulsed TIG welding the current varies between two well-defined energy levels in a given frequency being, therefore, necessary to the adjustment of a set of variables consisting of the peak current, peak time, background current, background time and the welding speed. However, despite being a technique so widespread, in practice these welding variables are often regulated arbitrarily. This can lead to inefficient use of the pulsed current regarding the end result of the weld as well as in the aspects of productivity. Given this shortage, this paper aims to present a roadmap developed in order to meet the practical need to establish criteria to assist in the determination of pulsed TIG welding variables, taking as its premise the desired width of the weld bead, overlap between the weld points comprising the weld bead and the

Produktudvikling af fødevarer med Quality Function Deployment

DEFF Research Database (Denmark)

Bech, Anne C.

1998-01-01

Produktudvikling af fødevarer stiller stadig større krav til virksomhedernes kompetencer. QFD filosofien kan bidrage til at skabe en fælles forståelse af grundlaget for udvikling af nye produkter. Udgangspunktet er en forståelse af forbrugernes behov i relation til virksomhedens muligheder...... konkurrentprodukter. Efterfølgende faser handler om at generere forskellige mulige løsninger, inden der træffes valg af løsningsalternativ. Anvendelse af QFD modellen for produktudvikling betyder, at forbrugernes behov er centrale i hele produktudviklingsforløbet, samt at det udviklede produkt sigter mod at opfylde...... væsentlige identificerede behov set fra forbrugernes synspunkt. At virksomheden ser implementering af QFD som en investering, medarbejdernes commitment og målrettet projekt, er væsentlig for en succesfuld implementering af QFD til produktudvikling. QFD tankegangen illustreres med et eksempel på udvikling af...

Innovation af innovation

DEFF Research Database (Denmark)

Harste, Gorm

2009-01-01

, at innovation af innovationen forsøges gennemført på en måde, hvor tiden kræves at forholde sig til sin egen tidslighed i form af fremtid, nutid, fortid og ikke mindst i form af samtidighed. I tiden skal vi iagttage, hvordan vi iagttager tiden. Vi dobbelt-koder tiden på samme måde, som forskning forsker i...... organisationssystemerne. De to typer systemer kan noget helt bestemt med fænomenet tid. De kan synkronisere. Analyseres organisationssystemer ser vi, imidlertid at innovation kræver ro. Stærkt innovative systemer er militærsystemet og kunstsystemet, der også inddrages, og hvor vi ser paradokset mellem innovation og...... involution. Tid er med et medium og ikke et lufttomt rum. Tid er end ikke en gasart, men udgør et solidt fluidum, som samfundet bader i og flyder i, konstant i bevægelse. Reformer forudsætter former, og innovation forudsætter involution. Kun sådan muliggøres evolution....

I Frans af Assisis fodspor

DEFF Research Database (Denmark)

Bonde, Lisbeth

2015-01-01

En fodrejse fra Assisi til Rom i Frans af Assisis fodspor sætter gang i tankerne og giver anledning til nye ideer......En fodrejse fra Assisi til Rom i Frans af Assisis fodspor sætter gang i tankerne og giver anledning til nye ideer...

Anbefalinger til organisering af uddannelserne

DEFF Research Database (Denmark)

Andersen, Lars; Andersen, Lars Døvling; Hornemann, Birte C.

2009-01-01

Notatet sammenfatter de diskussioner, som det af fakulteterne nedsatte udvalg vedrørende nye undervisnings- og eksamensformer har haft, og de anbefalinger til en omlægning af vores uddannelsessystem, som udvalget har valgt at give. Notatet er samtidig en begyndelse på en erfaringsudveksling om ny...

Registrering og Benchmarking af Modus 2 Forskning

DEFF Research Database (Denmark)

Duus, Henrik Johannsen; Jørgensen, Jens E.

2004-01-01

Fremvæksten af modus 2 forskning stiller krav om en revurdering af højere læreanstalters evaluerings- og meriteringspraksis. Den endimensionale prioritering af modus 1 forskning såvel som dennes ligeså endimensionale evaluering via publikationer må afvises som utidssvarende. Som en konsekvens her...

NIR: optimerer produktionen af gammeldags modnede sild

DEFF Research Database (Denmark)

Svensson, T.; Bro, Rasmus; Nielsen, Henrik Hauch

2005-01-01

Måling med nærinfrarødt (NIR) lys er et godt supplement til de nuværende metoder til at følge modningen af sild saltede i tønder. Det viser resultaterne af et forskningsprojekt udført i samarbejde mellem Lykkeberg A/S, Danmarks Fiskeriundersøgelser og Den Kgl Veterinær- og Landbohøjskole. Ved hjælp...... af avanceret matematik er det nemt og hurtigt at bestemme modningsgraden af sild direkte fra en NIR måling....

Undersøgelse af udviklingen i maksimale vandstande i den østligste del af Limfjorden Aalborg – Hals

DEFF Research Database (Denmark)

Burcharth, Hans Falk; Røge, Mads Sønderstrup

Udviklingen i maksimalvandstande i den veslige del af Limfjorden har påkaldt sig stor interesse i forbindelse med diskussionen om stigende oversvømmelsesfrekvens relateret til en eventuel klimaændring. Formålet med nærværende undersøgelse er at belyse udviklingen i maksimalvandstande i den østlig...... østligste del af Limfjorden på strækningen fra Aalborg til Hals, en strækning hvor der er lavtliggende områder på begge sider af fjorden. Målinger af højvandstande i Aalborg er foretaget siden 1944 og i Hals siden april 2002....

[Occupational exposure of welders to ultraviolet and "blue light" radiation emitted during TIG and MMA welding based on field measurements].

Science.gov (United States)

Wolska, Agnieszka

2013-01-01

The aim of the study was to present the results of welders' occupational exposure to "blue light" and UV radiation carried out at industrial workstations during TIG and MMA welding. Measurements were performed at 13 workstations (TIG welding: 6; MMA welding: 7), at which different welding parameters and materials were used. The radiation level was measured using a wide-range radiometer and a set of detectors, whose spectral responses were adequately fit to particular hazard under study. The measurement points corresponded with the location of eye and hand. The highest values of eye irradiance were found for aluminum TIG welding. Effective irradiance of actinic UV was within the range E(s) = 7.79-37.6 W/m2; UVA total irradiance, E(UVA) = 18-53.1 W/m2 and effective blue-light irradiance E(B) = 35-67 W/m2. The maximum allowance time ranged from 1.7 to 75 s, which means that in some cases even unintentional very short eye exposure can exceed MPE. The influence of welded material and the type of electrode coating on the measured radiation level were evidenced. The exceeded value of MPE for photochemical hazard arising for the eyes and skin was found at all measured workstations. Welders should use appropriately the eye and face protective equipment and avoid direct staring at welding arc when starting an arc-welding operation. Besides, the lack of head and neck skin protection can induce acute and chronic harmful health effects. Therefore, an appropriate wear of personal protective equipment is essential for welders' health.

Arbejdsmiljøet ved udbud af renovationsarbejde

DEFF Research Database (Denmark)

Busck, Ole Gunni

Forfatteren gennemførte 2003-2005 en undersøgelse for Branchearbejdsmiljådet for transport af danske kommuners praksis i forbindelse med udbud og udlicitering af renovationsopgaver. Formålet var at kortlægge og analysere erfaringerne med varetagelse af arbejdsmiljøhensyn i kommunernes udbud og dr...

Bone marrow mesenchymal stem cells from infants with MLL-AF4+ acute leukemia harbor and express the MLL-AF4 fusion gene

Science.gov (United States)

Catalina, Purificación; Rodríguez, René; Melen, Gustavo J.; Bueno, Clara; Arriero, Mar; García-Sánchez, Félix; Lassaletta, Alvaro; García-Sanz, Ramón

2009-01-01

MLL-AF4 fusion is a hallmark genetic abnormality in infant B-acute lymphoblastic leukemia (B-ALL) known to arise in utero. The cellular origin of leukemic fusion genes during human development is difficult to ascertain. The bone marrow (BM) microenvironment plays an important role in the pathogenesis of several hematological malignances. BM mesenchymal stem cells (BM-MSC) from 38 children diagnosed with cytogenetically different acute leukemias were screened for leukemic fusion genes. Fusion genes were absent in BM-MSCs of childhood leukemias carrying TEL-AML1, BCR-ABL, AML1-ETO, MLL-AF9, MLL-AF10, MLL-ENL or hyperdiploidy. However, MLL-AF4 was detected and expressed in BM-MSCs from all cases of MLL-AF4+ B-ALL. Unlike leukemic blasts, MLL-AF4+ BM-MSCs did not display monoclonal Ig gene rearrangements. Endogenous or ectopic expression of MLL-AF4 exerted no effect on MSC culture homeostasis. These findings suggest that MSCs may be in part tumor-related, highlighting an unrecognized role of the BM milieu on the pathogenesis of MLL-AF4+ B-ALL. MLL-AF4 itself is not sufficient for MSC transformation and the expression of MLL-AF4 in MSCs is compatible with a mesenchymal phenotype, suggesting a differential impact in the hematopoietic system and mesenchyme. The absence of monoclonal rearrangements in MLL-AF4+ BM-MSCs precludes the possibility of cellular plasticity or de-differentiation of B-ALL blasts and suggests that MLL-AF4 might arise in a population of prehematopoietic precursors. PMID:19995953

Udvikling af pille-doserings teknologi

DEFF Research Database (Denmark)

Brændgaard, Rikke; Churchill, Inge-Lise; Bolvig Poulsen, Søren

2015-01-01

Lab. X har i samarbejde med Brønderslev Kommune og Firmaet LT Automation i et idegenereringsforløb omhandlende viden om "pillens vej", indhentet viden om udfordringer og barrierer i forbindelse med udlevering af medicin fra apoteket til den afslutningsvis indtages af borgeren. Formålet med unders...

Delevalueringer af teknologi og velfærd i 4skit

DEFF Research Database (Denmark)

Miller, Tanja; Haslam, Trine Lolk; Abildgaard, Katrine Copmann

Som et led i evaluering af satspuljeprojekt i regi af AMU - Aalborg har CEPRA udført en række delevaluering af udvalgte projekter......Som et led i evaluering af satspuljeprojekt i regi af AMU - Aalborg har CEPRA udført en række delevaluering af udvalgte projekter...

Frisættelse af fødderne

DEFF Research Database (Denmark)

Kirkeby, Ole Fogh

2013-01-01

Kropskultur. Amerikansk journalist og forfatter hævder, at løb - og fødder - giver adgang til livets mening. Anmeldelse af: Christoffer McDougall: Født til løb. Oversat af Jacob Giese efter Born to Run. Forlaget Turbulenz, 400 sider.......Kropskultur. Amerikansk journalist og forfatter hævder, at løb - og fødder - giver adgang til livets mening. Anmeldelse af: Christoffer McDougall: Født til løb. Oversat af Jacob Giese efter Born to Run. Forlaget Turbulenz, 400 sider....

Distribution af video – lige meget hvordan?

Directory of Open Access Journals (Sweden)

Diba Markus

2009-04-01

Full Text Available Artiklen omhandler løsninger til distribution af video og de faktorer, der kan være udslagsgivende, når man som underviser eller universitet skal vælge, hvilken man vil gøre brug af. De kommercielle løsninger såsom YouTube m.fl. er kendt af de fleste. Hvad færre måske ved er, at der eksisterer alternativer. På europæisk plan har en række institutioner og forskningsnet, herunder det danske, således valgt at lave deres egne løsninger. Der er afgørende forskelle i disse hhv. kommercielle og ikke-kommercielle videodistributionstjenesters tilgange til problemstillinger vedrørende adgangsbegrænsning, ophavsret, metadatering og bevaring samt kvalitetssikring af indhold - forskelle, der for en stor del udspringer af deres respektive opdrag og muligheder for brugerautentificering. Kun de færreste af alternativerne kan bruges af danske studerende og universitetsansatte. Som der argumenteres for i artiklen, er disse problemstillinger imidlertid vigtig baggrundsinformation, når der skal tages stilling til, hvordan man bedst distribuerer videoressourcer. I artiklen beskrives overordnede fællestræk ved hhv. de kommercielle og de ikke-kommercielle distributionsløsninger, og de helt grundliggende forskelle mellem dem diskuteres.

Benchmarking af udsættelser i kommunerne

DEFF Research Database (Denmark)

Christensen, Gunvor; Jeppesen, Anders Gade; Markwardt, Kristoffer

2015-01-01

nuværende tidspunkt stadig mangler relevante forhold i benchmarking-modellen. Eksempelvis antallet af stofmisbrugere, antallet af borgere med psykiatriske indlæggelser samt forekomsten af projekter med henblik på at forebygge udsættelser (fx gældsrådgivning). Disse data er først tilgængelige i 2015....

Brugen af personas hos danske virksomheder - 2012/13

DEFF Research Database (Denmark)

Nielsen, Lene; Nielsen, Kira Storgaard

2013-01-01

Denne rapport er skrevet på baggrund af et projekt initieret og finansieret af InfinIT – Innovationsnetværket for IT. Formålet med projektet er at undersøge hvorledes personas i dag etableres, kommunikeres, anvendes og vedligeholdes i forskellige typer af virksomheder samt etablere et opdateret sæt...... af anbefalinger for deres anvendelse. Virksomheders erfaringer med personas vil blive adresseret fra to forskellige vinkler:. Fokus vil bl.a. være på hvordan personas udvikles og vedligeholdes, om og hvordan de bruges, og hvad de bruges til. Personas er beskrivelser af fiktive brugere og bruges i...... designprocesser. Beskrivelserne er skabt på baggrund af data indsamlet om slutbrugerne. En samling af personas, som regel mellem 2 og 6 beskrivelser, vil i denne rapport benævnes et personasæt. Når personabeskrivelserne indgår i designprocessen bruges de til at få ideer til og beskrive, hvordan brugerne vil...

Svingningsundersøgelse af betonskorsten

DEFF Research Database (Denmark)

Dalgaard, Lars-Bo; Kristensen, Peter

Dette projekt omhandler en teoretisk og en eksperimentel undersøgelse af svingningsforholdene for en 110 meter høj betonskorsten. Skorstenen tilhører I/S Nordjyllands elektricitetsforsyning(NEFO) og er opført i forbindelse med en udbygning af Vendsysselværket med en sektion II med en turbine effe...... på 300 MW. Vendsysselværkets sektion I og II er afbilledet i figur 1.1.1, hvor værket er set fra nordøst med den undersøgte skorsten til højre i billedet. Skorstenen er projekteret af firmaet Rambøll og Hannemann og taget i brug i foråret 1977....

Værdisætning af natur- og kulturgoder. Et metodestudie af betydningen for ændringer i skala og betalingsformat

DEFF Research Database (Denmark)

Hasler, Berit; Jacobsen, Jette Bredahl; Lundhede, Thomas

aggregering og skalaproblemer. Denne rapport beskriver og tester tre af disse problemstillinger. Testene er udført som delundersøgelser ("splitsamples"), hvor det samme spørgeskemamateriale anvendes og ændres separat for hvert split. En undersøgelse af betalingsviljen for restaurering og gennemførelse af et...

Masser af information uden betydning

DEFF Research Database (Denmark)

Brier, Søren

en diskussion af informationsteorien i Tor Nørretranders "Mærk verden" og en skitse til et alternativ baseret på anden ordens kybernetik og semiotik......en diskussion af informationsteorien i Tor Nørretranders "Mærk verden" og en skitse til et alternativ baseret på anden ordens kybernetik og semiotik...

Effekten af absolut kumulation

DEFF Research Database (Denmark)

Kyvsgaard, Britta; Klement, Christian

2012-01-01

Som led i finansloven for 2011 blev regeringen og forligspartierne enige om at undersøge reglerne om strafudmåling ved samtidig pådømmelse af flere kriminelle forhold og i forbindelse hermed vurdere konsekvenserne af at ændre de gældende regler i forhold til kapacitetsbehovet i Kriminalforsorgens...... samlet bødesum ved en absolut kumulation i forhold til en modereret kumulation, som nu er gældende....

Portræt af litteraturkritikeren som ungt menneske

DEFF Research Database (Denmark)

Schatz-Jakobsen, Claus

2004-01-01

Artiklen præsenterer den amerikanske litteraturkritiker Geoffrey Hartmans tidlige forfatterskab og fremdrager dets selvbiografiske undertekst som nødvendig effekt af den unge Hartmans fascination af den engelske romantiker William Wordsworths forfatterskab.......Artiklen præsenterer den amerikanske litteraturkritiker Geoffrey Hartmans tidlige forfatterskab og fremdrager dets selvbiografiske undertekst som nødvendig effekt af den unge Hartmans fascination af den engelske romantiker William Wordsworths forfatterskab....

Uddrag af Ph.d.-afhandlingen Den groteske modernisme

DEFF Research Database (Denmark)

Lübker, Henrik

2011-01-01

Om forholdet mellem "det groteske" og "den groteske modernisme" eksemplificeret i en læsning af E.A. Poes "The Fall of the House of Usher" og flere af Francis Bacons malerier.......Om forholdet mellem "det groteske" og "den groteske modernisme" eksemplificeret i en læsning af E.A. Poes "The Fall of the House of Usher" og flere af Francis Bacons malerier....

Wear behavior of the surface alloyed AISI 1020 steel with Fe-Nb-B by TIG welding technique

Science.gov (United States)

Kilinc, B.; Durmaz, M.; Abakay, E.; Sen, U.; Sen, S.

2015-03-01

Weld overlay coatings also known as hardfacing is a method which involves melting of the alloys and solidification for applied coatings. Recently hardfacing by welding has become a commonly used technique for improvement of material performance in extreme (high temperature, impact/abrasion, erosion, etc.) conditions.In the present study, the coatings were produced from a mixture of ferrous niobium, ferrous boron and iron powders in the ranges of -45µm particle size with different ratio. Fe12Nb5B3 and Fe2NbBalloys were coated on the AISI 1020 steel surface by TIG welding. The phases formed in the coated layer are Fe2B, NbB2, NbFeB and Fe0,2 Nb0,8 phases. The hardness of the presence phases are changing between 1689±85 HV0.01, and 181±7 HV0.1. Microstructural examinations were realized by optical and scanning electron microscopy. The wear and friction behaviors of Fe12Nb5B3 and Fe2NbB realized on the AISI 1020 steel were investigated by the technique of TIG welding by using ball-on-disk arrangement against alumina ball.

Virkelighedsflugt og masser af sex

DEFF Research Database (Denmark)

Lorentzen, Rasmus Fink

2011-01-01

I artiklen laves en læsning af ungdomsromanen "6" (2010) af Ronni Andersen. Dernæst udfoldes en række litteraturpædagogiske forslag tilen undervisning i romanen i skolens ældste klasser. Arbejdsforslagene er baseret på en kompetencetilgang til danskfaget og rummer fire værksteder hvor eleverne sk...

Forført af hjernen?

DEFF Research Database (Denmark)

Lieberoth, Andreas

2013-01-01

Blandingen af offentlig interesse, gode mediehistorier og smarte sælgere har ført til sejlivede neuromyter, der ikke bare distraherer almindelige mennesker, men også fører til udbredte misforståelser blandt professionelle som lærere og plejepersonale. I bedste fald leder neuromyter til spild af t...

Dicty_cDB: Contig-U08834-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available .. 40 0.012 11 ( AM422018 ) Candidatus Phytoplasma australiense complete genome. 36 0.012 19 ( AC005308 ) Pl...tig VV78X172452.29, whole genom... 42 0.081 3 ( FL645023 ) TS46-F4 Reticulitermes flavipes symbiont library ...AF053733 |pid:none) Expression vector pPK113, complete... 206 2e-51 T51932( T51932 ) kinesin [imported...*** f... 38 0.018 6 ( ER570718 ) 1093015791013 Global-Ocean-Sampling_GS-36-01-01-2... 46 0.018 3 ( DY888602 ...ulans strain w501 ki... 189 1e-46 AF319546_1( AF319546 |pid:none) Trypanosoma brucei C-term

Æstetiseringen af forbruget: En undersøgelse af to udstillinger, hvor branding er kunst - og kunst er branding

DEFF Research Database (Denmark)

Hermansen, Judy

2008-01-01

Æstetiseringen af hverdagen er ét af de helt centrale træk ved det postmoderne forbrugersamfund. Og denne nedbrydning af grænserne mellem kunst og forbrug er det også vigtigt for marketingteorien at udforske. Artiklen analyserer to (kunst?)udstillinger i England, som på hver sin måde tematiserer,...

Forhastet regulering af de store

DEFF Research Database (Denmark)

Thomsen, Steen

2013-01-01

Christiansborg gennemfører sandsynligvis en markant skærpet regulering af de store finansielle virksomheder. Det vil virke kontraktivt og medvirke til erhvervslivets kredittørke.......Christiansborg gennemfører sandsynligvis en markant skærpet regulering af de store finansielle virksomheder. Det vil virke kontraktivt og medvirke til erhvervslivets kredittørke....

Ledelse af forandringer i folkeskolen

DEFF Research Database (Denmark)

Kjer, Mikkel; Rosdahl, Anders

2016-01-01

Dette notat bygger på kvalitative interview på seks folkeskoler i efteråret 2015. Skolerne ligger i forskellige egne af landet og i landområder, mindre og store byer. Skolerne er af forskellig størrelse, og deres elevgrundlag, dvs. forældrenes sociale baggrund, varierer også. Notatet bygger primæ...

Håndteringen af musikfiler i krydsfeltet mellem downloading og streaming

DEFF Research Database (Denmark)

Ægidius, Andreas Lenander

remedieringen af musikfilen som stream ud fra den konceptuelle model for et kulturkredsløb, hvori et kulturelt artefakts betydning dannes (Gay mfl., 2013). Kommodificeringer og rekommodificering af musikfiler og håndteringer bliver herved sammenkædet med remediering og konvergens (Bolter & Grusin, 2000; Jenkins...... kommodificerer streamrip med fokus på at gøre filkonverteringer lette at anvende. Sidstnævnte viser jeg med analyse af brugen af software, der ripper musik fra YouTube. Jeg finder modstridende artikulationer af lydkvalitet blandt de tre grupper. Formatet og repræsentationen i diverse platformes brugerflader er...... digitale online musikbrug. Et konkret eksempel herpå er det sammensurium af transkodninger, som følger af YouTubes repræsentation, regulering, produktion af stream og lytternes efterfølgende brug, herunder streamrip. Dette sammensurium af transkodninger betegner jeg som en fonografisk effekt af YouTube...

Miljøoptimering af afvaskning ved tryk med vandfortyndbar flexotrykfarve

DEFF Research Database (Denmark)

Larsen, Henrik Fred; Helweg, Christian; Pedersen, Anne Rathmann

Rapporten beskriver praksis ved afvaskning af vandfortyndbare flexotrykfarver i emballageindustrien og anviser muligheder for indførelse af renere teknologi til reduktion af spildevandsbelastningen. Anbefalingerne omfatter a) udformning af farveværker med henblik på effektiv tømning af farve og e...

Udkantsdanmark: Avisernes (med)produktion af Nordjyllands territorielle stigma

DEFF Research Database (Denmark)

Pristed Nielsen, Helene; Christensen, Sascha

2013-01-01

Artiklen undersøger hvordan Region Nordjylland (NJ) beskrives i medierne og hvordan diskursen om Udkanten dominerer avisernes fremstilling af regionen . Baggrunden herfor er en interesse for social ulighed, og i denne sammenhæng Wacquants begreb om territorielt stigma (1996, 2007). Wacquant føjer...... stigma. I Gunnar Lind Haase Svendsens studie af italesættelsen af ’udkanten’ fra 1996-2011 ses fx en gennem de seneste år stigende anvendelse af termer som ’den rådne banan’ og ’Udkantsdanmark’ i medierne (Svendsen 2013: 12). Dette stigma forbindes med flere dele af Danmark (se bl.a. Arbejderbevægelsens...

Vidensledelse og den sociale dimension i deling af viden

DEFF Research Database (Denmark)

Lauring, Jakob

2004-01-01

imidlertid et alternativt syn på viden som i højere grad inddrager den sociale dimension ved vidensdeling - den socialkonstruktivistiske opfattelse. I denne artikel vil jeg beskæftige mig med den socialkonstruktivistiske opfattelse af viden og beskrive, hvorledes denne synsvinkel kan rette fokus mod nogle...... meget væsentlige problemstillinger ved organisatorisk adfærd, som man ofte kommer til at ignorere, hvis man i for høj grad baserer ledelsen på en funktionalistisk opfattelse af viden. Delingen af viden er en aktuel udfordring for anvendelse af viden i forretningssammenhæng. Det er hovedsageligt det, som...... gør vidensbegrebet interessant i forhold til ledelse af virksomheder. - Fokus på de sociale barrierer for deling af viden Jeg vil i det kommende illustrere, hvilke betydninger den sociale dimension i deling af viden kan have for videnledelse. Det vil jeg gøre gennem beskrivelser af to forskellige...

Analyse og design af produktionssystemer

DEFF Research Database (Denmark)

Johansen, John; Riis, Jens Ove; Arlbjørn, Jan Stentoft

lys, men til vores store glæde og overraskelse har vi erfaret, at dele af materialet stadigvæk er anvendt på en del ingeniør- og økonomiuddannelser i Danmark. Nogle af de tanker og metoder som blev udviklet i ViPSprogrammet har overlevet og opfattes fortsat som relevante og anvendelige også til...

Effektivitet af naturligt drevne radontiltag året rundt

DEFF Research Database (Denmark)

Haker Høegh, Britt; Rasmussen, Torben Valdbjørn

Denne rapport omhandler projektet Effektivitet af naturligt drevne radontiltag året rundt. Projektet er et spireprojekt finansieret af Innovationsnetværket InnoBYG og Forsknings- og Innovationsstyrelsen. Projektet er gennemført af Teknologisk Institut i samarbejde med Statens Byggeforskningsinsti...

Produktion og afsætning af nicheprodukter

DEFF Research Database (Denmark)

Jensen, Jonas Baungaard; Hansen, Henning Otte

2016-01-01

. Egnsmærker opnår generelt en merpris på 20-30 pct. Det er dog bemærkelsesværdigt, at landmanden “kun” har omkring 13 pct. af forbrugerkronen på Lammefjords-kartofler. Her er der tale om unikke produkter, hvor det i praksis udelukkende er landmanden og landmandens placering og produktion, som skaber de unikke...

Evaluering af den ernæringsmæssige kvalitet af madordninger i daginstitutioner

DEFF Research Database (Denmark)

Nielsen, Marie Heyn; Lassen, Anne Dahl; Christensen, Lene Møller

Fokus på madordninger i daginstitutioner og kvaliteten heraf har været stigende de seneste år. Mange nye madordninger er etableret i løbet af 2009 og 2010 især i børnehaver og i børnehavegrupper i de integrerede daginstitutioner. I 2009 opstillede Fødevarestyrelsen anbefalinger for den ernæringsm...... fedt samt at servere fisk, grøntsager, kartofler, samt fuldkornsvarianter af ris, pasta og brød mere hyppigt....

Characterization on the Microstructure Evolution and Toughness of TIG Weld Metal of 25Cr2Ni2MoV Steel after Post Weld Heat Treatment

Directory of Open Access Journals (Sweden)

Xia Liu

2018-03-01

Full Text Available The microstructure and toughness of tungsten inert gas (TIG backing weld parts in low-pressure steam turbine welded rotors contribute significantly to the total toughness of the weld metal. In this study, the microstructure evolution and toughness of TIG weld metal of 25Cr2Ni2MoV steel low-pressure steam turbine welded rotor under different post-weld heat treatment (PWHT conditions are investigated. The fractography and microstructure of weld metal after PWHT are characterized by optical microscope, SEM, and TEM, respectively. The Charpy impact test is carried out to evaluate the toughness of the weld. The optical microscope and SEM results indicate that the as-welded sample is composed of granular bainite, acicular ferrite and blocky martensite/austenite (M-A constituent. After PWHT at 580 °C, the blocky M-A decomposes into ferrite and carbides. Both the number and size of precipitated carbides increase with holding time. The impact test results show that the toughness decreases dramatically after PWHT and further decreases with holding time at 580 °C. The precipitated carbides are identified as M23C6 carbides by TEM, which leads to the dramatic decrease in the toughness of TIG weld metal of 25Cr2Ni2MoV steel.

Sammenligning af kvaliteten af kommunernes sagsbehandling

DEFF Research Database (Denmark)

Rasmussen, Martin

flere forskellige spørgsmål fra praksis¬undersøgelser i samme sammenligning. Vi foreslår også, at metoder til såkaldte ’multi¬ple sammenligninger’ bruges til dele af undersøgelserne. Det er en ældre og ikke særlig kendt metode, men den er særdeles relevant både i den konkrete anvendelse og i andre...

Occupational exposure of welders to ultraviolet and "blue light" radiation emitted during TIG and MMA welding based on field measuremants

Directory of Open Access Journals (Sweden)

Agnieszka Wolska

2013-02-01

Full Text Available Background: The aim of the study was to present the results of welders' occupational exposure to "blue light" and UV radiation carried out at industrial workstations during TIG and MMA welding. Materials and methods: Measurements were performed at 13 workstations (TIG welding: 6; MMA welding: 7, at which different welding parameters and materials were used. The radiation level was measured using a wide-range radiometer and a set of detectors, whose spectral responses were adequately fit to particular hazard under study. The measurement points corresponded with the location of eye and hand. Results: The highest values of eye irradiance were found for aluminum TIG welding. Effective irradiance of actinic UV was within the range Es = 7.79-37.6 W/m2; UVA total irradiance, EUVA = 18-53.1 W/m2 and effective blue-light irradiance EB = 35-67 W/m2. The maximum allowance time ranged from 1.7 to 75 s, which means that in some cases even unintentional very short eye exposure can exceed MPE. Conclusions: The influence of welded material and the type of electrode coating on the measured radiation level were evidenced. The exceeded value of MPE for photochemical hazard arising for the eyes and skin was found at all measured workstations. Welders should use appropriately the eye and face protective equipment and avoid direct staring at welding arc when starting an arcwelding operation. Besides, the lack of head and neck skin protection can induce acute and chronic harmful health effects. Therefore, an appropriate wear of personal protective equipment is essential for welders' health. Med Pr 2013;64(1:69–82

Undersøgelse af mulighederne for anvendelse af open source Integrated Library Systems (ILS) i universitetsbiblioteket

DEFF Research Database (Denmark)

Greve, Eli; Bøgh Pedersen, Kasper

Dette projekt har til formål, at to biblioteker med meget forskellige profiler gennemfører test af konkrete open source baserede ILS systemer, formidler resultaterne til FFU-bibliotekerne og deres interessenter, og herved bidrager til en nuancering af beslutningsprocesserne i de kommende år omkring...

Anmeldelse af Eigil Lego Andersen: Dirigent og generalforsamling

DEFF Research Database (Denmark)

Werlauff, Erik

2011-01-01

Artiklen er en anmeldelse af advokat, adj. professor, dr. jur. Eigil Lego Andersens juridiske monografi om dirigenten og generalforsamlingen, herunder med lancering af en række nye afstemningsmetoder til brug for generalforsamlingen i (større) aktieselskaber.......Artiklen er en anmeldelse af advokat, adj. professor, dr. jur. Eigil Lego Andersens juridiske monografi om dirigenten og generalforsamlingen, herunder med lancering af en række nye afstemningsmetoder til brug for generalforsamlingen i (større) aktieselskaber....

Forsegling af okklusal dentincaries i permanente molarer

DEFF Research Database (Denmark)

Qvist, Vibeke; Borum, Mette Kit; Dynes Møller, Kirsten

2017-01-01

Der findes ingen eksakte tal for forekomsten af fødevareallergi i den danske befolkning. Den kumulerede forekomst af fødevareallergi hos børn i de første tre leveår skønnes at være på 7-8 %, hvoraf hovedparten vokser sig fra det. Punktprævalensen af diagnosticeret fødevareallergi hos voksne er 3 ...

Succesfulde virksomheder ledes af mænd - Ikke succesfulde af kvinder?

DEFF Research Database (Denmark)

Madsen, Mona Toft; Madsen, Henning; Neergaard, Helle

fra amerikanske og britiske undersøgelser (Schein, 1973, 75, 96; Ryan et al., 2005a) ved at teste dem i et kulturelt miljø karakteriseret af mere feminine ledertræk (Hofstede, 1991). Undersøgelsen tager udgangspunkt i et sæt af person-karakteristika, der er blevet anvendt til at undersøge sammenfald...... mellem mandlige karakteristika og succesfuld ledelse (Schein, 1973, 75, 96). På lige fod med nyere britiske undersøgelser (Ryan et al. 2005a), er den aktuelle undersøgelse imidlertid udvidet til også at omhandle lederes perceptioner i forhold til ledelse i virksomheder uden succes. Resultaterne viser...

Læremiddeltjek af Fandange - dansk for 5. klasse af Trine May og Susanne Arne-Hansen

DEFF Research Database (Denmark)

Christensen, Mette Vedsgaard

2013-01-01

Fandango 5 er skrevet af Trine May og Susanne Arne-Hansen og er første gang udgivet i 2009. Systemet er siden kommet i flere oplag. Fandango – dansk for 5. klasse består af en grundbog (264 sider) Arbejdsbog A (64 sider) Arbejdsbog B (64 sider), en lærervejledning (ca. 220 sider) og en hjemmeside...

Udvikling af en internetsøgestrategi til identifikation af ny medicinsk teknologi inden for prostatacancer

DEFF Research Database (Denmark)

Thygesen, Marianne; Vondeling, Hindrik; Douw, Karla

2007-01-01

internetsider efter efficiens. Her er efficiens forstået som mindst antal minutter brugt pr. fund af information om en ny væsentlig medicinsk teknologi. Resultater: Strategien består af ti sider, som bør benyttes i følgende rækkefølge: YahooHealth, DoctorsGuide, The National Electronic Library for Medicines...

Metodik til studiet af strategiske ledelsesprocesser i organisationer

Directory of Open Access Journals (Sweden)

Jørgen Gulddahl Rasmussen

2010-10-01

Full Text Available Denne artikel handler om at skabe viden om en hverdagspraksis, der sjældent er sat ord på. Den behandler de ledelsesprocesser, der i virksomheder producerer strategi og omsætter sådanne strategier i produktive handlinger. Det er processer, der i små og mellemstore virksomheder er præget af intuition og af meget uformelle samspil mellem virksomhedsledere og medarbejdere. Metodikken er en videreudvikling af de metoder til produktion af kvalitative data, som FIRM-gruppen har eksperimenteret med gennem nogle år. Artiklen kan ses som en afrapportering af et flerårigt metodeudviklingsarbejde. Da erfaringer fra sådanne virksomheder viser, at strategiske processer i høj grad udvikler sig gennem uformel kommunikation, og at lederes intuition spiller en meget stor rolle, arbejder metodikken med en struktureret udviklingsdialog mellem et mindre antal virksomhedsledere med strategiske opgaver og forskere. Denne udviklingsdialog har til formål at følge og forstå de processer, der skaber ledernes egne praksisrelaterede ”teorier” for strategisk handling. Efter en præsentation af temaet gennemgås metodikkens praktiske fremgangsmåde med undersøgelser i en række virksomheder, opbygning af cases i samarbejde med ledere fra disse virksomheder, diskussion af disse og foreløbige konklusioner hen mod de næste trin i metodikken. Artiklen er skrevet samtidigt med arbejdet på et igangværende forskningsprojekt og vil derfor både være en præsentation og en udvikling af muligheder og vanskeligheder i metodikken.

Skattemæsssig kvalifikation af trusts i praksis

DEFF Research Database (Denmark)

Feldthusen, Rasmus Kristian

2013-01-01

Artiklen har til formål at systematisere og redegøre for skattemyndighedernes fremgangsmåde og kvalifikation af trusts i dansk ret. Baggrunden herfor er, at antallet af trust-sager for såvel de administrative myndigheder som domstolene relativt set er vokset betydeligt siden årtusindeskiftet. Ud...... fra en gennemgang af doms- og administrativ praksis kan det konstateres, at kvalifikationen af trusts kan opdeles i fire hovedkategorier, som er væsentlige at have kendskab til, såfremt en skattesag indeholdende trust-elementer måtte være under opsejling. Endvidere inddrages skattestrafferetlig...... praksis på baggrund af en nyligt afsagt landsretsdom vedrørende en offshore trust....

Rating af banker og banksystemer

DEFF Research Database (Denmark)

Grosen, Anders

2010-01-01

Banksystemer over hele verdenen er med nød og næppe blevet reddet af diverse statslige hjælpepakker. Derfor er der i disse år øget fokus på banker og banksystemers rating. Denne interesse bliver ikke mindre af, at de statslige garantier til bankerne i mange lande udløber i de kommende år. Rating ...

The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms

KAUST Repository

Park, Hyo-Young

2017-04-21

The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms. These proteins also move rapidly and continuously in the nuclei, and their movements are affected by ATP depletion. The U2AF65 proteins are splicing factors that interact with SF1 and U2AF35 proteins to promote U2snRNP for the recognition of the pre-mRNA 3\\' splice site during early spliceosome assembly. We have determined the subcellular localization and movement of these proteins\\' Arabidopsis homologs. It was found that Arabidopsis U2AF65 homologs, AtU2AF65a, and AtU2AF65b proteins interact with AtU2AF35a and AtU2AF35b, which are Arabidopsis U2AF35 homologs. We have examined the mobility of these proteins including AtSF1 using fluorescence recovery after photobleaching and fluorescence loss in photobleaching analyses. These proteins displayed dynamic movements in nuclei and their movements were affected by ATP depletion. We have also demonstrated that these proteins shuttle between nuclei and cytoplasms, suggesting that they may also function in cytoplasm. These results indicate that such splicing factors show very similar characteristics to their human counterparts, suggesting evolutionary conservation.

The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms

KAUST Repository

Park, Hyo-Young; Lee, Keh Chien; Jang, Yun Hee; Kim, SoonKap; Thu, May Phyo; Lee, Jeong Hwan; Kim, Jeong-Kook

2017-01-01

The Arabidopsis splicing factors, AtU2AF65, AtU2AF35, and AtSF1 shuttle between nuclei and cytoplasms. These proteins also move rapidly and continuously in the nuclei, and their movements are affected by ATP depletion. The U2AF65 proteins are splicing factors that interact with SF1 and U2AF35 proteins to promote U2snRNP for the recognition of the pre-mRNA 3' splice site during early spliceosome assembly. We have determined the subcellular localization and movement of these proteins' Arabidopsis homologs. It was found that Arabidopsis U2AF65 homologs, AtU2AF65a, and AtU2AF65b proteins interact with AtU2AF35a and AtU2AF35b, which are Arabidopsis U2AF35 homologs. We have examined the mobility of these proteins including AtSF1 using fluorescence recovery after photobleaching and fluorescence loss in photobleaching analyses. These proteins displayed dynamic movements in nuclei and their movements were affected by ATP depletion. We have also demonstrated that these proteins shuttle between nuclei and cytoplasms, suggesting that they may also function in cytoplasm. These results indicate that such splicing factors show very similar characteristics to their human counterparts, suggesting evolutionary conservation.

Automatic TIG-welding in fabrication and repair of power plant. Chapter 4

International Nuclear Information System (INIS)

Bromwich, R.A.C.

1978-01-01

In the power plant industry many of the tube-to-tubeplate (or tube-to-header) welds and many tube-to-tube welds require the TIG process. This welding process and the associated technology have been developed for a wide range of applications covering both production and repair of power plant and ancillary equipment. It is often necessary, and usually preferred, to automate the process. The application of pulsing extends the range to more difficult materials and marginal thicknesses. The development and application of the process over the past few years is described. The mechanised equipment may be divided into four main categories: bore welding, seal welding, orbital welding, and special equipment. (U.K.)

Centralisering af FM organisationer

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev

2016-01-01

Centralisering af FM organisationer kan let føre til mange frustrerende arbejds- dage for medarbejdere og deres ledere. Denne artikel giver et bud på hvad kom- muner og andre kan gøre for at komme bedre igennem en omorganisering.......Centralisering af FM organisationer kan let føre til mange frustrerende arbejds- dage for medarbejdere og deres ledere. Denne artikel giver et bud på hvad kom- muner og andre kan gøre for at komme bedre igennem en omorganisering....

Måling af lydisolation og efterklangstid i praksis

DEFF Research Database (Denmark)

Kristensen, J.

Meddelelsen omhandler undersøgelser af mulighederne for at forbedre reproducerbarheden ved måling af luftlydisolation, trinlydniveau og efterklangstid under betingelser, der svarer til måling i den indflytningsfærdige bygning. Der omtales resultater fra måling med to forskellige udformninger af h...

Afståelsesbeskatning ved flytning af DEMPE-funktioner

DEFF Research Database (Denmark)

Kjærsgaard, Louise Fjord; Bundgaard, Jakob

2017-01-01

OECD har i den senest opdaterede version af Transfer Pricing Guidelines fastsat en definition af immaterielle aktiver og har samtidig indført konceptet DEMPE-funktioner, der omfatter visse vigtige funktioner relateret til immaterielle aktiver. SKAT synes at være af den opfattelse, at DEMPE...

Application of YAG Laser TIG Arc Hybrid Welding to Thin AZ31B Magnesium Alloy Sheet

Science.gov (United States)

Kim, Taewon; Kim, Jongcheol; Hasegawa, Yu; Suga, Yasuo

A magnesium alloy is said to be an ecological material with high ability of recycling and lightweight property. Especially, magnesium alloys are in great demand on account of outstanding material property as a structural material. Under these circumstances, research and development of welding process to join magnesium alloy plates are of great significance for wide industrial application of magnesium. In order to use it as a structure material, the welding technology is very important. TIG arc welding process is the most ordinary process to weld magnesium alloy plates. However, since the heat source by the arc welding process affects the magnesium alloy plates, HAZ of welded joint becomes wide and large distortion often occurs. On the other hand, a laser welding process that has small diameter of heat source seems to be one of the possible means to weld magnesium alloy in view of the qualitative improvement. However, the low boiling point of magnesium generates some weld defects, including porosity and solidification cracking. Furthermore, precise edge preparation is very important in butt-welding by the laser welding process, due to the small laser beam diameter. Laser/arc hybrid welding process that combines the laser beam and the arc is an effective welding process in which these two heat sources influence and assist each other. Using the hybrid welding, a synegistic effect is achievable and the disadvantages of the respective processes can be compensated. In this study, YAG laser/TIG arc hybrid welding of thin magnesium alloy (AZ31B) sheets was investigated. First of all, the effect of the irradiation point and the focal position of laser beam on the quality of a weld were discussed in hybrid welding. Then, it was confirmed that a sound weld bead with sufficient penetration is obtained using appropriate welding conditions. Furthermore, it was made clear that the heat absorption efficiency is improved with the hybrid welding process. Finally, the tensile tests

Reformationens tøvende omfortolkning af kætterbegrebet

DEFF Research Database (Denmark)

Holm, Bo Kristian; Thomsen, Søren Feldtfos

2012-01-01

Denne artikel undersøger påstanden om en omfortolkning af kætterbegrebet i den lutherske reformation. Der argumenteres for, at det giver god mening at tale om nytænkning af kætterbegrebet hos den unge Luther i form af en internalisering af kætteriet, hvor den enkeltes eget syndige selv udpeges som...

Betydningen af pesticider for forekomsten af vilde bier

DEFF Research Database (Denmark)

Bruus, Marianne; Dupont, Yoko Luise; Grant, Ruth

Både i Danmark og andre steder er der observeret en nedgang i de insekter, der bestøver landmandens afgrøder og de vilde planter. Tilbagegangen falder sammen med, at landbrugsdriften er blevet mere intensiv, og anvendelsen af pesticider er øget. Vi ved imidlertid ikke, hvilken rolle pesticiderne ...

T.I.G. Welding of stainless steel. Numerical modelling for temperatures calculation in the Haz; Soldadura T.I.G. de acero inoxidable. Modelo numerico para el calculo de temperaturas en la ZAT

Energy Technology Data Exchange (ETDEWEB)

Martinez-Conesa, E. J.; Estrems-Amestoy, M.; Miguel-Eguia, V.; Garrido-Hernandez, A.; Guillen-Martinez, J. A.

2010-07-01

In this work, a numerical method for calculating the temperature field into the heat affected zone for butt welded joints is presented. The method has been developed for sheet welding and takes into account a bidimensional heat flow. It has built a computer program by MS-Excel books and Visual Basic for Applications (VBA). The model has been applied to the TIG process of AISI 304 stainless steel 2mm thickness sheet. The welding process has been considered without input materials. The numerical method may be used to help the designers to predict the temperature distribution in welded joints. (Author) 12 refs.

Barriere for Studerendes Læring af Holistisk Systemudvikling

DEFF Research Database (Denmark)

Levinsen, Karin; Madsen, Sabine

Ud fra aktionsforskning af faget Informationsbehandling på bachelorprogrammet HA/DØK ved Copenhagen Business School undersøger vi i denne artikel hvilke barriere de studerende oplever i forbindelse med læring af holistisk systemudvikling og hvorfor. Siden 1980'erne har man i (dele af) litteraturen...

Udførelse af bygningsakustiske målinger

DEFF Research Database (Denmark)

Rasmussen, Birgit; Hoffmeyer, Dan; Olesen, Henrik S.

Denne anvisning definerer og beskriver udførelse af bygningsakustiske målinger m.m. i relation til Bygningsreglement 2015 (BR15), kapitel 6.4, Akustisk Indeklima (Trafik- og Byggestyrelen, 2016). Anvisningen er en opdatering af den første udgave fra 2008. Den nye udgave er ajourført med vejledning...... knyttet til blandt andet de nye standarder med feltmålemetoder for lydisolation. Anvisningen henvender sig primært til personer og firmaer, der udfører bygningsakustiske målinger, men vil også være et vigtigt redskab for rådgivere, udførende og leverandører i forbindelse med projektering af bygninger....... Anvisningen er også relevant for kommunerne i forbindelse med kontrol af opfyldelsen af lydbestemmelserne i bygningsreglementet....

Development of a one side automatic TIG arc welding system in horizontal position for annular vessels in nuclear fuel cycle factory

International Nuclear Information System (INIS)

Ohtsuka, Takao; Ohsawa, Morihiko; Nakashima, Hiroyuki; Habuta, Susumu; Hori, Tomiji; Fujiwara, Katsusi; Kitaguchi, Yoshihisa.

1995-01-01

Various annular vessels are planned to be equipped as a part of the plutonium refining facility in the nuclear fuel cycle factory. For manufacturing the high quality vessels, a one side automatic TIG arc welding system which is applied to the circumferencial joints in horizontal welding position have been completed. The automatic welding system is confirmed to be effective for improving the joint qualities and saving the manufacturing cost by our Mockup test. The main points of our welding system are as follows. (1) Low pulsed TIG arc welding process with a mixed shielding gas of Ar+5%H 2 is being employed. (2) Mechanical seam trucking system for the carriage and welding torch is equipped in the welding machine. (3) Arc voltage controlling system is employed for stabilizing the welding condition. (4) Magnetic wheels are equipped at the carriage for travelling without rails. The weight of this welding machine is designed to be less than 15 kg. (author)

Børns konstruktion af (bi)literacy

DEFF Research Database (Denmark)

Laursen, Helle; Daugaard, Line Møller; Østergaard, Winnie

analyser heraf. Programmet er baseret på et socialsemiotisk teorigrundlag, der indebærer, at tilegnelse af skriftsystemer ses som en proces, hvorigennem børn skaber betydning ud fra den information, der er tilgængelig for dem i de sociale fællesskaber, de indgår i (Kress 1997, 2000, Kenner 2004). For børn....... I dette paper præsenteres programmet, og de indsamlede data analyseres med særligt henblik på at identificere børnenes konstruktion af (bi)literacy og deres fortolkninger af, hvad der konsti-tuerer, og hvad der tæller som literacy...

Amélioration des performances du procédé de soudage TIG sur un acier au carbone et un alliage d'aluminium par dépôt de silice

Science.gov (United States)

Sire, Stéphane; Marya, Surendar

This Note presents ways to improve the weld penetration potential of TIG process by optimising silica application around the joints in a plain carbon steel and an aluminium alloy 5086. Whereas for plain carbon steels, full coverage of joint improves penetration, the presence of a blank zone around the joint in the flux coating on aluminium 5086 using AC-TIG seems to be the best solution for cosmetic and deep welds. To cite this article: S. Sire, S. Marya, C. R. Mecanique 330 (2002) 83-89.

Læremiddelevaluering af web 2.0 læremidler

DEFF Research Database (Denmark)

Falkesgaard Slot, Marie; Gissel, Stig Toke

2014-01-01

Kapitlet etablerer og afprøver et analyseapparat, der bidrager til at højne kvaliteten af de valg, som foretages af web 2.0-læremidler i danskfaget. I kapitlet fokuseres der på læremiddel evaluering af nogle af de funktioner, som typisk tilskrives web 2.0-værktøjerne, ligesom der gives eksempler på...

FEM-analyse af termiske Spændinger i Svejsning

DEFF Research Database (Denmark)

Hansen, Jan Langkjær

1997-01-01

Undersøgelser af de transiente temperaturfelter og de heraf inducerede spændinger og deformationer som følge af en stumpsøm-svejsning i plader af konstruktionsstål modelleret i henholdsvis 2D plan spændings-/tøjningstilstand og 3D er foretaget ved brug af det generelt anvendelige finite-element p......-element program ABAQUS....

Markedsføring af probiotiske fødevarer: Kan vi lære noget af Gaio og ProViva

DEFF Research Database (Denmark)

Bech-Larsen, Tino; Andersen, Lone Merete Schreiber

2004-01-01

Erfaringerne fra Gaio yoghurt (fra Arla) og ProViva frugtdrik/suppe (fra Skånemejerierne) viser, at der kan være vanskeligt at overbevise forbrugerne om probiotiske fødevarers fortrin. Både Gaio og ProViva har haft succes på deres respektive hjemmemarkeder, men ingen af produkterne har kunnet klare...... den korte tur over øresund. Med afsæt i Gaio og ProViva har MAPP og SIK undersøgt, hvordan forskellige reklame- og mediestrategier påvirker forbrugernes accept af probiotiske fødevarer. Undersøgelsen Undersøgelsen omfattede for det første en analyse af reklamer og nyhedsartikler om de to produkter...

Subregional innovation – indikatorer til optimering af den erhvervsrettede innovationspolitik

DEFF Research Database (Denmark)

Mortensen, Peter Stendahl; Graversen, Ebbe Krogh; Haase, Sanne Schioldann

områder tilgodeses bedst muligt. Desuden kan en differentieret, subregional innovations-politik give erhvervslivet bedre udbytte end en samlet regional eller national innovationspolitik. Selvom Danmark er et lille land, er der store geografiske forskelle internt i landets erhvervsstruktur og i...... virksomhedernes innovationsaktiviteter. Som resultat af en udvidelse af den danske del af CIS 2006-undersøgelsen2 med ekstra virksomheder kan der gives en betydeligt mere nuanceret karak-teristik af virksomheder helt ned på subregionalt niveau. Analysen underbygger, at de innovations-politiske tiltag, der sættes......, lokal brug af resultaterne er nødvendig. Først gennemgås de valgte målepunkter. Det primære er en opdeling i praksis- og forsknings-orientering af virksomheders innovationstilgang, hvorved der identificeres fire grupper af innovationsaktive virksomheder. Det andet er korrektion af de anvendte...

Styring af international transfer pricing

DEFF Research Database (Denmark)

Reuther, Peter; Rossing, Christian Plesner

2011-01-01

Nærværende artikel introducerer international transfer pricing, dels som et skatteretligt fænomen og dels som et værktøj til planlægning og økonomisk styring af koncernforbundne selskaber i en multinational virksomhed (MNV). Med udgangspunkt i en case-analyse af MNV’en gives der et konkret eksempel...... på hvordan transfer pricing håndteres i praksis. Artiklens formål er at give et praktisk eksempel på at transfer pricing handler om at efterleve regler, ikke omgå dem. På baggrund af case-analysen argumenteres der for, at såvel akademikere som praktikere bør tage virksomhedens tilgang til...... international transfer pricing i betragtning, når økonomiske styringssystemer i en MNV skal anvendes til planlægning og opfølgning....

Økonomisk vurdering af energibesparende foranstaltninger

DEFF Research Database (Denmark)

Johnsen, Kjeld; Andersen, Hans Skifter

Anvisningen gennemgår detaljeret hvordan man gennemfører analyser af lønsomhed og likviditetsvirkninger som led i udarbejdelsen af det teknisk-økonomiske grundlag for beslutninger om energibesparende investeringer. Anvisningen indeholder blandt andet en række enkle skemaer, der kan lette og syste...

Måling af virksomheders administrative byrder

DEFF Research Database (Denmark)

Langsted, Lars Bo

2004-01-01

Selskabsstyrelsen har offentliggjort rapporten: "Rapport om måling af virksomhedernes administrative byrder ved årsregnskabsloven og rapport om revisionshonorar for B-virksomheder."......Selskabsstyrelsen har offentliggjort rapporten: "Rapport om måling af virksomhedernes administrative byrder ved årsregnskabsloven og rapport om revisionshonorar for B-virksomheder."...

Wear behavior of the surface alloyed AISI 1020 steel with Fe-Nb-B by TIG welding technique

Energy Technology Data Exchange (ETDEWEB)

Kilinc, B., E-mail: bkilinc@sakarya.edu.tr; Durmaz, M.; Abakay, E. [Department of Metallurgical and Materials Engineering, Institute of Arts and Sciences, SakaryaUniversity, Esentepe Campus, 54187Sakarya (Turkey); Sen, U.; Sen, S. [Department of Metallurgical and Materials Engineering, Engineering Faculty, Sakarya University, Esentepe Campus, 54187 Sakarya (Turkey)

2015-03-30

Weld overlay coatings also known as hardfacing is a method which involves melting of the alloys and solidification for applied coatings. Recently hardfacing by welding has become a commonly used technique for improvement of material performance in extreme (high temperature, impact/abrasion, erosion, etc.) conditions.In the present study, the coatings were produced from a mixture of ferrous niobium, ferrous boron and iron powders in the ranges of -45µm particle size with different ratio. Fe{sub 12}Nb{sub 5}B{sub 3} and Fe{sub 2}NbBalloys were coated on the AISI 1020 steel surface by TIG welding. The phases formed in the coated layer are Fe{sub 2}B, NbB{sub 2}, NbFeB and Fe0,2 Nb{sub 0,8} phases. The hardness of the presence phases are changing between 1689±85 HV{sub 0.01}, and 181±7 HV{sub 0.1}. Microstructural examinations were realized by optical and scanning electron microscopy. The wear and friction behaviors of Fe{sub 12}Nb{sub 5}B{sub 3} and Fe2NbB realized on the AISI 1020 steel were investigated by the technique of TIG welding by using ball-on-disk arrangement against alumina ball.

Forekomst af alkohol, narkotika og medicin hos bilister

DEFF Research Database (Denmark)

Bernhoft, Inger Marie

2011-01-01

Inden for rammerne af det fælles-europæiske forskningsprojekt DRUID (DRiving Under the Influence of Drugs, alcohol and medicines) er forekomsten af alkohol og/eller andre stoffer blevet undersøgt i et stort antal europæiske lande, bl.a. i Danmark.......Inden for rammerne af det fælles-europæiske forskningsprojekt DRUID (DRiving Under the Influence of Drugs, alcohol and medicines) er forekomsten af alkohol og/eller andre stoffer blevet undersøgt i et stort antal europæiske lande, bl.a. i Danmark....

Re-weldability tests of irradiated Inconel 625 by TIG welding method

International Nuclear Information System (INIS)

Tsuchiya, K.; Shimizu, M.; Kawamura, H.; Matsuda, F.; Kalinin, G.

1998-01-01

Inconel 625 is one of the possible materials for the vacuum vessel (VV) and for the in-vessel components of fusion reactors where high strength and high electrical resistance are required. In particular, Inconel 625 is used for the VV of JET and for flexible branch pipe lines in the ITER design. One of the most important issues for their applications is its re-weldability between un-irradiated and irradiated materials. This has a large impact on the design of in-vessel components. In this study, re-weldability of un-irradiated and/or irradiated Inconel 625 that has been welded by the tungsten inert gas (TIG) welding process has been examined, and effect of helium generation amount on mechanical properties of the weld joint has been discussed. (authors)

En tegning af æstetik 2013

DEFF Research Database (Denmark)

Buhl, Mie; Ejsing-Duun, Stine

2013-01-01

Denne artikel fremstiller skredet fra det individuelle fokus til den sociale forhandling omkring en situation, som er det nye perspektiv indenfor æstetik. Derigennem identificeres tendenser som er med til at udgøre platformen for børn og unges kulturer, hvor det handler om, at et æstetisk system er...... selvproducerende og stiller sig til rådighed for erkendelse. Disse kulturer udfolder sig i formater, som skolen ikke er gearet til at imødekomme. Som eksempel ville DrawSomething vanskeligt kunne begrundes i forhold til billedkunstfagets af ministeriet fastsatte ”fælles mål” – eller kan det? En central udfordring...... er, hvordan der skal arbejdes med æstetiske praksisformer i en nutidig læringskontekst, når børn og unges kulturer udfolder og udvikler sig i formater, der er præget af foranderlighed og flygtighed; af en uendelig skaben for nogen og med nogen og af situationer, der bebos med attituder? Vi diskuterer...

Microstructural development in multi-pass TIG welded F82H steels under dual-ion irradiation

Energy Technology Data Exchange (ETDEWEB)

Ogiwara, H.; Tanigawa, H. [Japan Atomic Energy Agency, Tokai-mura, Naga-gun, Ibaraki-ken (Japan); Kishimoto, H.; Tomohiro, M.; Kohyama, A. [Kyoto Univ., Institute of Advanced Energy (Japan)

2007-07-01

Full text of publication follows: Reduced-activation ferritic/martensitic (RAFM) steels are the first candidate materials for blanket structural component. On fabricating blanket components, various joining technologies will be required, and it could be anticipated that some parts of the weldments will suffer from high-dose 14 MeV neutron irradiation. For example, the current Japanese water cooled test blanket module design has the weldment of the first wall and side wall at 25 mm from the surface. This will not be the case for TIER-TBM, but could be the critical issue if the same design is applied for DEMO blanket system. In this study, the effects of displacement damage and helium production on mechanical properties and microstructures of the multi-pass tungsten inert gas (TIG) welding were investigated. The welded joint used in this study is a multi-pass TIG weldment on 15-mm thick plates of F82H-IEA. The post weld heat treatment was carried out at 720 deg. C for 1 h. To obtain systematic and accurate information of the microstructural response under fusion environment, dual-ion irradiation was performed. 15 mm x 20 mm pieces which cover the whole TIG weldment were irradiated at 470 deg. C up to 20 dpa using 6.4 MeV Fe{sup +3} and/or energy-degraded 1.0 MeV He{sup +}. The damage rate was 1.0 x 10{sup -3} dpa/s, and the helium injection rate was 15 x 10{sup -3} appm He/s. After the irradiations, thin film samples were made from various regions of the weldment by focused ion beam (FIB) processor, and transmission electron microscopy (TEM) observation and hardness tests were performed. Microstructure and Vickers hardness profiles across base metal, heat affected zone (HAZ) and fusion zone (FZ) were examined before irradiation experiments. The hardness measurements revealed that the maximum hardness was observed at the last pass region of FZ, and the softest region was in the middle of the FZ and HAZ region near the transformation line. In the microstructure study

Modellering af ATS forhold på Bjergmarken Renseanlæg

DEFF Research Database (Denmark)

Laursen, Jesper; Rasmussen, Michael R.

Denne rapport indeholder resultaterne af numeriske beregninger af en procestank opereret under ATS-drift på Bjergmarken Renseanlæg.......Denne rapport indeholder resultaterne af numeriske beregninger af en procestank opereret under ATS-drift på Bjergmarken Renseanlæg....

Når ledelse af ledelse rettes mod selvet

DEFF Research Database (Denmark)

Krause-Jensen, Niels Henrik

2012-01-01

Der fokuseres på det nye selvledelsesforhold som ledelse af ledelse er med til at fremkalde. Ud fra et signalement af det nye arbejdsliv beskrives det hvordan ledelse af ledelse skal forvalte en indgriben i medarbejderens selvforhold, hvor både magt og afmagt vil gøre sig gældende....

Evaluation of Surface Roughness by Image Processing of a Shot-Peened, TIG-Welded Aluminum 6061-T6 Alloy: An Experimental Case Study

Directory of Open Access Journals (Sweden)

Anas M. Atieh

2018-05-01

Full Text Available Visual inspection through image processing of welding and shot-peened surfaces is necessary to overcome equipment limitations, avoid measurement errors, and accelerate processing to gain certain surface properties such as surface roughness. Therefore, it is important to design an algorithm to quantify surface properties, which enables us to overcome the aforementioned limitations. In this study, a proposed systematic algorithm is utilized to generate and compare the surface roughness of Tungsten Inert Gas (TIG welded aluminum 6061-T6 alloy treated by two levels of shot-peening, high-intensity and low-intensity. This project is industrial in nature, and the proposed solution was originally requested by local industry to overcome equipment capabilities and limitations. In particular, surface roughness measurements are usually only possible on flat surfaces but not on other areas treated by shot-peening after welding, as in the heat-affected zone and weld beads. Therefore, those critical areas are outside of the measurement limitations. Using the proposed technique, the surface roughness measurements were possible to obtain for weld beads, high-intensity and low-intensity shot-peened surfaces. In addition, a 3D surface topography was generated and dimple size distributions were calculated for the three tested scenarios: control sample (TIG-welded only, high-intensity shot-peened, and low-intensity shot-peened TIG-welded Al6065-T6 samples. Finally, cross-sectional hardness profiles were measured for the three scenarios; in all scenarios, lower hardness measurements were obtained compared to the base metal alloy in the heat-affected zone and in the weld beads even after shot-peening treatments.

Overmæt af islam kontra danskhed

DEFF Research Database (Denmark)

Khawaja, Iram

2013-01-01

Debatindlæg der retter fokus på at, islam og muslimer konstrueres som modbillede til alt det, som danskhed repræsenterer, og at man i denne forbindelse glemmer at definitionen af danskhed gennem negationen af islam sker på bekostning af de mange muslimske borgere, der har skabt en identitet og...... selvforståelse som danske muslimer. Der tales her om de mange mennesker, der har skabt en tilværelse ved at sammentænke danskhed og islam i et forsøg på at overskride kontrasten imellem et fremmed ”dem” og et dansk ”os”. Denne gruppe udgør størstedelen af de herboende unge, voksne og børn, som ikke forstår...

Udtrækning af 10 mm ankerbolte

DEFF Research Database (Denmark)

Hansen, Lars Pilegaard

Denne rapport beskriver forsøg med udtrækning af 10 mm ankerbolte udført af Laboratoriet for Bærende Konstruktioner, Instituttet for Bygningsteknik, Aalborg Universitet. Forsøgene blev udført d. 19. og 21. juni 2001. Forsøgene blev udført dels på Hjørring Sygehus og dels på Laboratoriet.......Denne rapport beskriver forsøg med udtrækning af 10 mm ankerbolte udført af Laboratoriet for Bærende Konstruktioner, Instituttet for Bygningsteknik, Aalborg Universitet. Forsøgene blev udført d. 19. og 21. juni 2001. Forsøgene blev udført dels på Hjørring Sygehus og dels på Laboratoriet....

Undersøgelse af kommunernes administration af bygningsreglementets elevatorkrav

DEFF Research Database (Denmark)

Grangaard, Sidse

Denne rapport undersøger kommunernes praksis omkring administrationen af bygningsreglementets krav om elevator ved nybyggeri og ombygning. Blandt de 26 kommuner, der har deltaget i undersøgelsen, var der generelt konsensus om at stille krav om elevator ved nybyggeri. Kommunerne modtager kun meget...

Overvågning af fugle 1997-98, resultater fra feltstationerne

DEFF Research Database (Denmark)

Vejler, i alt ca. 5.500 ha. Feltstationen blev oprettet i 1978, og siden har observatørerne registreret fuglelivet i Vejlerne og de omgivende arealer foruden vandstand, saltholdighed og drift af området. Tipperne ligger i den sydlige del af Ringkøbing Fjord. Fuglelivet blev fredet i 1898. Reservatet blev...... en samlet fredning af Vadehavet, omfatter øen Langli på 80 ha og vandarealer på i alt ca. 8.000 ha. Øen består af klitter og salte strandenge. Vandområdet er præget af tidevand, hvor vidtstrakte sand- og mudderflader og spredte muslingebanker er synlige ved lavvande. Vorsø ligger i Horsens Fjord...... saltholdighed i Ringkøbing Fjord bevirker, at vandplanter vokser dårligt eller forsvinder. Vandplanter udgør en væsentlig del af føden for visse andefugle og kan derfor have stor betydning for antallet af rastende fugle. Der blev registreret lave antal af knortegå, gråand, pibeand og krikand. Af blishøne blev...

Optimalt design af fødevarer

DEFF Research Database (Denmark)

Bech, Anne C.; Engelund, Erling; Juhl, Hans Jørn

1993-01-01

Udformningen af fødevarer opfattes som et designproblem, det består i at omsætte markedskrav, belyst gennem markedsanalyser, til egenskaber ved de fremstillede produkter under hensyntagen til de dermed forbundne omkostninger. Denne oversættelse af forbrugerønsker antages at kunne ske effektivt ge...

Protecting your files on the AFS file system

CERN Multimedia

2011-01-01

The Andrew File System is a world-wide distributed file system linking hundreds of universities and organizations, including CERN. Files can be accessed from anywhere, via dedicated AFS client programs or via web interfaces that export the file contents on the web. Due to the ease of access to AFS it is of utmost importance to properly protect access to sensitive data in AFS. As the use of AFS access control mechanisms is not obvious to all users, passwords, private SSH keys or certificates have been exposed in the past. In one specific instance, this also led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed in April 2010 to apply more stringent folder protections to all AFS user folders. The goal of this data protection policy is to assist users in...

Bagsideidræt ramt af skandale

DEFF Research Database (Denmark)

Elbæk, Lars

2008-01-01

Ekspert rystet over sikkerheden - idrætsgren udelukket - redaktør sporløst forsvundet Fyens Bagside Idræt (FBI) er rystet af sin første skandale. Det drejer sig om sikkerheden i den af forbundet indtil i går anerkendte disciplin trampolinbold, hvor flere børn på samme tid hopper i trampolin, mens...... de forsøger at undgå at ramme bolde på samme trampolin. - Det er direkte uansvarligt og jeg er rystet, siger lektor Lars Elbæk fra Institut for Idræt og Biomekanik på Syddansk Universitet. - I overtræder simpelthen samtlige sikkerhedsregler for, hvordan man skal undgå skader på en trampolin...... skader, der opstår i havetrampoliner, sker på baggrund af uhensigtsmæssig brug, siger Lars Elbæk, som har opstillet 12 sikkerhedsanbefalinger, der blandt andet kan ses på www.trampolin.dk . En af disse foranstaltninger er, at kun én person ad gangen hopper i trampolinen: - 75 procent af alle...

Udvikling af strategiske alliancer, joint ventures og netværk

DEFF Research Database (Denmark)

Gustafsson, Jeppe; Henriksen, Lars Bo; Larsson, Rune

Rapporten er et resultat af et projekt om virksomhedssamarbejde under Industri- og Handelsstyrelsens program "Ledelse af samarbejde om teknologisk fornyelse". Formålet med projektet har været at bidrage til udvikling af anvendelsesorienterede modeller vedrørende udvikling og ledelse af alliancer ...

Bestemmelse af spormetaller i organisk materiale

DEFF Research Database (Denmark)

Tjell, Jens Christian; Palfeldt, Kirsten

Behovet for pålidelige analysemetoder til bestemmelse af spormetalindhold i organiske materialer, f.eks. planter, slam og dyrevæv er stigende på grund af den stigende erkendelse af disse stoffers betydning for organismers fysiologi, både hvor disse stoffer optræder i uønskede koncentrationer som...... der over de sidste år udviklet en analyseprocedure hvorefter det er muligt at analysere for metallerne Mn, Cu, Ni, Co, Cr, Zn, Cd og Pb i planter, dyrevæv, jord, slam og andre materialer med standardafvigelser på mellem 5 og 10%. Der gøres rede for denne metode....

Professionel udvikling af naturfagslærere

DEFF Research Database (Denmark)

Krogh, Lars Brian

2016-01-01

& Hollingsworth, 2002) som model for tænkning omkring TPD, samt anvende en mange-lags evalueringsoptik i overensstemmelse med Guskey (2002). Den eksisterende viden om, hvad der skal til for at professionelle udviklingsaktiviteter får virkning opsummeres som afsæt for en drøftelse af TPD-design. Endelig...

Sproget afhænger af stedet

DEFF Research Database (Denmark)

Monka, Malene

2014-01-01

I artiklen præsenteres resultaterne af et ph.d.-projekt ved Nordisk Forskningsinstitut ved Københavns Universitetet, der undersøger sammenhænge mellem sted og sprogforandring. Projektet er en undersøgelse af sprogforandring i virkelig tid, hvor gamle og nye optagelser med 23 informanter fra tre j...

Overvågning af influenza A virus i svin - Slutrapport 2015

DEFF Research Database (Denmark)

Krog, Jesper Schak; Hjulsager, Charlotte Kristiane; Larsen, Lars Erik

Denne rapport beskriver resultaterne af overvågning af influenza i svin i Danmark i 2015 og sammenholder resultaterne med dem fra de foregående år og udenlandske studier. Laboratorieundersøgelser og databehandling er udført på DTU Veterinærinstituttet. Indledende screening af prøver for tilstedev......Denne rapport beskriver resultaterne af overvågning af influenza i svin i Danmark i 2015 og sammenholder resultaterne med dem fra de foregående år og udenlandske studier. Laboratorieundersøgelser og databehandling er udført på DTU Veterinærinstituttet. Indledende screening af prøver...... for tilstedeværelsen af influenza A virus er betalt af indsenderne, mens de øvrige analyser er finansieret af FVST’s overvågningsprogram. Slutrapporten er den endelige opgørelse af analyserede indsendelser for det pågældende år. Der kan være mindre afvigelser mellem slutrapport og kvartalsrapporterne....

Anmeldelser af litteratur om den græsk-romerske oldtid

DEFF Research Database (Denmark)

Krasilnikoff, Jens

2007-01-01

Anmeldelse af Neville Morley, "Trade in Classical Antiquity". Key Themes in Ancient History. Cambridge UP, 2007. p.22. Anmeldelse af J. Bingen, "Hellenistic Egypt. Monarchy, Society, economy, Culture", Edinburgh UP, 2007, pp.22-23. Anmeldelse af C. Koehn, "Krieg-Diplomatie-Ideologie. Zur Ausenpol......Anmeldelse af Neville Morley, "Trade in Classical Antiquity". Key Themes in Ancient History. Cambridge UP, 2007. p.22. Anmeldelse af J. Bingen, "Hellenistic Egypt. Monarchy, Society, economy, Culture", Edinburgh UP, 2007, pp.22-23. Anmeldelse af C. Koehn, "Krieg-Diplomatie-Ideologie. Zur...... Ausenpolitik hellenistischer Mittelstaaten", Franz Steiner 2007, pp.24-25. Anmeldelse af A. Kühr,"Als Kadmos nach Boiotien kam. Polis und ethnos im Spiegel thebanischer Gründungsmythen", Franz Steiner 2007, p. 25. P. Low, "Interstate relations in Classical Greece. Morality and Power", Cambridge UP 2007, pp. 26...

Udforskning af dialoger om et regnehul

DEFF Research Database (Denmark)

Lindenskov, Lena

2007-01-01

Med introduktionen af det danske begreb 'regnehuller' om matematikvanskeligheder bliver det muligt at udforske dialoger i klasserummet med brug af værktøjer fra Augusto Boals Forumteater. Principperne i Boals tre faser præsenteres som værktøjer for læreres refleksive praksis. Ud fra datamateriale...

Revisionsklienters anvendelse af serviceleverandører

DEFF Research Database (Denmark)

Kjersgaard, Lisbeth; Kiertzner, Lars

2011-01-01

Artiklen præsenterer det overordnede indhold af den ajourførte ISA 402 om revisionsmæssige overvejelser ved revision af regnskaber for virk somheder, der anvender service-leverandører. Artiklen er opbygget efter de tre grundlæggende elementer i revisionsprocessen - planlægning, udførelse og rappo...

Beskrivelse og modellering af produktionssystemer, Tulip

DEFF Research Database (Denmark)

Jacobsen, Peter

1997-01-01

produktionssystemer til brug ved optimering af drift og planlægning/udvikling af nye produktionssystemer. For at opnå et nødvendigt informationsgrundlag udføres projektet i samarbejde med udvalgte virksomheder.Rapporten er udført i samarbejde med Tulip International A/S i Vejle, hvor den del, der omfatter...

Weld defects analysis of 60 mm thick SS316L mock-ups of TIG and EB welds by ultrasonic inspection for fusion reactor vacuum vessel applications

International Nuclear Information System (INIS)

Buddu, Ramesh Kumar; Shaikh, Shamsuddin; Raole, P.M.; Sarkar, B.

2015-01-01

The present paper reports the weld quality inspections carried with 60 mm thick AISI welds of SS316L. The high thickness steel plates requirement is due to the specific applications in case of advanced fusion reactor structural components like vacuum vessel and others. Different kind welds are proposed for the thick plate joints like Tungsten Inert Gas (TIG) welding, Electron beam welding as per stringent conditions (like very low distortions and residual stresses) for the vacuum vessel fabrication. Mock-ups of laboratory scale welds are fabricated by TIG (multi-pass) and EB (double pass) process techniques and different weld quality inspections are carried by different NDT tests. The welds are examined with Liquid penetrant examination to check sub surface cracks/discontinuities towards the defects observation

Kan man ventilere sig ud af problemer med forhøjet indhold af PCB i indeluften?

DEFF Research Database (Denmark)

Lyng, Nadja

2016-01-01

Vi ser stadig, at byggematerialer fra perioden i nogle tilfælde er årsag til forhøjede koncentrationer af PCB i indeklimaet. Sundhedsstyrelsen har derfor fastsat en vejledende aktionsgrænse på 300 ng/ m ³. Ved koncentrationer over denne grænse anbefales midlertidig afhjælpning som øget rengøring og...... ventilation eller udluftning implementeret straks. Er disse tiltag ikke tilstrækkelige til at nedbringe koncentrationen, anbefales det uden unødig forsinkelse at nedbringe koncentrationen ved kildefjernelse eller indkapsling. Ventilation har betydning for PCB-koncentrationen i indeluften, men kan ventilation...... forurenede lokaler. Da PCB-koncentrationen afhænger af temperaturen, er alle koncentrationer korrigeret for temperatur for at kunne vurdere effekten af ventilation alene....

Virksomhedens bæredygtighed

DEFF Research Database (Denmark)

Linneberg, Mai Skjøtt; Thomsen, Christa

2011-01-01

standardisering er i stedet en generel styringsmekanisme, der i udgangspunktet søger globale løsninger. Selvom bæredyg¬tig¬hed og standardisering som begreber trækker i modsatte retninger, skal danske virksomheder i praksis i stigende grad forholde sig til standardiseringen af bære¬dygtige praksisser. Et eksempel...

En bid af ældres hverdagsliv

DEFF Research Database (Denmark)

Bundgaard, Karen Marie; Top Christensen, Boye

2000-01-01

Undersøgelsen har udforsket hjemmeboende ældres egen forståelse og oplevelse af måltiddsaktiviteters betydning, og hvilke behov aktiviteterne dækker hos de ældre. Aktiviteterne har betydninger der knytter sig til maden men aktiviteterne har også betydninger i sig selv. Undersøgelsen er en af fler...

Sammenligning af laboratorieforsøg med kemiske, biologiske og termiske metoder til oprensning af residual fri fase under grundvandsspejlet i Kærgård Plantage

DEFF Research Database (Denmark)

Christophersen, Mette; Christensen, Jørgen Fjeldsø; Jørgensen, Torben H.

, sulfonamider, barbiturater, anilin, cyanid og kviksølv, og det har resulteret i en meget kompleks forurening. Efter afgravning af 4000 tons meget forurenet jord ned til grundvandsspejlet i to af de seks gruber er næste skridt afprøvning af forskellige metoder til fjernelse af den kraftige grundvandsforurening...

Æstetisk iscenesættelsen af det postindustrielle bylandskab

DEFF Research Database (Denmark)

Kiib, Hans

2013-01-01

det naturskønne, det ruinøse og de pittoreske billede af byen og landskabet spiller en vigtig rolle. Men samtidig iscenesætter den eleverede parkbro byen på en sublim måde forstået som opbyggelse af spændingsfelter mellem den nære og kendte og det fremmede og farlige i en af verdens spektakulære...... kortlægning af parkbroens rolle i bydelens dekonstruktion og nyiscenesættelse i en fremadskuende montage. Det omfatter en æstetisk modstilling af arkitektoniske virkemidler for det skønne, det pittoreske og det sublime og tilsvarende en tregrenet oplevelsespallete hos den besøgende: Den konplemtative væren i...

Ny styring af lærernes autonomi?

DEFF Research Database (Denmark)

Holm, Claus

2015-01-01

Kapitlet ”Ny styring af lærernes autonom?” i bogen Folkeskolen - efter reformen fokuserer på, hvordan en realisering af den vedtagne skolereform og forventningen om en kommende brug af nye forenklede Fælles Mål ud fra en målstyringstænkning ændrer lærernes autonomi til at udøve dømmekraft i...... klasseværelset. Dermed er kapitlets tese, at man ikke – i hvert fald ikke kun – kan tale om et tab af autonomi, men en ændret opfattelse og indhold heraf. Opgaven er derfor at indkredse, hvordan danske læreres autonomi til at udøve professionel dømmekraft forandrer sig, hvis man realiserer idéen om en...... læringsmålstyret undervisning, konkret i form af forenklede Fælles Mål. Og netop spørgsmålet om lærerens autonomi til at udøve professionel dømmekraft bliver i sammenhæng med styring heraf et centralt emne og problematik at afklare. Ikke kun i dansk sammenhæng, men også internationalt....

Advantages and successful use of TIG narrow-gap welding

International Nuclear Information System (INIS)

Loehberg, R.; Pellkofer, D.; Schmidt, J.

1986-01-01

Narrow-gap welding, an advancement of the mechanized TIG impulse welding process with conventional seam geometry (V-shaped and/or U-shaped welds), not only assures great economic efficiency on account of the low weld volume but also offers considerable benefits in terms of quality. Thanks to the low number of beads, the following advantages are gained: less axial and radial shrinkage which reduces the strain in the root area, total heat input and, thus, the dwell time in the critical temperature range from 500 to 800 0 C leading to a chromium depletion at the grain boundaries during the welding process is minimized which markedly reduces the sensitivity of non-stabilized steels to intercrystalline stress corrosion cracking, and a relatively favourable residual welding stress profile in the heat affected zone. The process was used successfully in the past for welds of ferritic and austenitic steel pipes in the construction of nuclear power plants and in the remote-controlled welding during the replacement of piping in plants already in operation. (orig.) [de

TgrC1 mediates cell-cell adhesion by interacting with TgrB1 via mutual IPT/TIG domains during development of Dictyostelium discoideum.

Science.gov (United States)

Chen, Gong; Wang, Jun; Xu, Xiaoqun; Wu, Xiangfu; Piao, Ruihan; Siu, Chi-Hung

2013-06-01

Cell-cell adhesion plays crucial roles in cell differentiation and morphogenesis during development of Dictyostelium discoideum. The heterophilic adhesion protein TgrC1 (Tgr is transmembrane, IPT, IG, E-set, repeat protein) is expressed during cell aggregation, and disruption of the tgrC1 gene results in the arrest of development at the loose aggregate stage. We have used far-Western blotting coupled with MS to identify TgrB1 as the heterophilic binding partner of TgrC1. Co-immunoprecipitation and pull-down studies showed that TgrB1 and TgrC1 are capable of binding with each other in solution. TgrB1 and TgrC1 are encoded by a pair of adjacent genes which share a common promoter. Both TgrB1 and TgrC1 are type I transmembrane proteins, which contain three extracellular IPT/TIG (immunoglobulin, plexin, transcription factor-like/transcription factor immunoglobulin) domains. Antibodies raised against TgrB1 inhibit cell reassociation at the post-aggregation stage of development and block fruiting body formation. Ectopic expression of TgrB1 and TgrC1 driven by the actin15 promoter leads to heterotypic cell aggregation of vegetative cells. Using recombinant proteins that cover different portions of TgrB1 and TgrC1 in binding assays, we have mapped the cell-binding regions in these two proteins to Lys(537)-Ala(783) in TgrB1 and Ile(336)-Val(360) in TgrC1, corresponding to their respective TIG3 and TIG2 domain.

Lokal integration af førtidspensionister

DEFF Research Database (Denmark)

Jacobsen, Joannes; Lindstrøm, Maia

Denne rapport kortlægger livsvilkårene for en bred gruppe af førtidspensionister med fokus på deres hverdag og de vilkår, som omgiver dem. Derudover identificerer rapporten en gruppe af førtidspensionister, der selv ønsker mere social interaktion og indhold i hverdagen. Undersøgelsen viser, at de...

Arbejdsmiljø ved udbud af busdrift

DEFF Research Database (Denmark)

Wiegmann, Inger-Marie; Mathiesen, Karin; Hasle, Peter

En undersøgelse af sammenhængen mellem arbejdsmiljø og udbud af busdrift i tre trafikselskabet. Resultaterne peger på at arbejdsmiljøet går fra udelukkende til at være et anliggende mellem arbejdsgiver og arbejdstager til et trepartsforhold hvor også udbyder (trafikselskabet) får et ansvar og har...

Udvikling og afprøvning af it-støttet vejledning af lærerstuderende i praktik

DEFF Research Database (Denmark)

Clemens, Heidie

2011-01-01

samarbejdet mellem læreruddannelsen og praktikinstitutionerne omkring vejledning af de studerende i praktikken via Skype eller VIAs platform og at afprøve en vejledningsform, der har karakter af procesvejledning. Erfaringer med at afprøve den virtuelle mødeform i denne sammenhæng muliggør mødet mellem...

Telefonitis: unge danskeres brug af telefonen i IT-tidsalderen

Directory of Open Access Journals (Sweden)

Gitte B. Stald

2000-09-01

Full Text Available Den udbredte brug af mobiltelefoner har sat fornyet fokus på telefonens betydning i vores tid. Som følge af den informationsteknologiske udvikling ændrer telefonen karakter fra at være en kanal for kommunikation til at være et medie for flere funktioner, samtidig med at dens konkrete og sym- bolske betydning forstærkes. Dette kan i særlig grad aflæses i større børns og unges brug af telefonen, der dels er karakteriseret ved stor selvfølgelig- hed, dels ved at have en betydning, der rækker ud over funktioner: den er markør af ungdomskultur, den er garant for tryghed, og den muliggør fast- holdelse af sociale og personlige relationer. Telefonen befordrer etablering- en af et virtuelt rum, hvor intimitet og fortrolighed er mulig. Set i lyset af den informationsteknologiske udvikling, der har bragt e-mail, chat og andre for- mer for on- og offline kommunikation ind i de fleste unge danskeres tilvæ- relse, er det interessant, at telefonen har fastholdt og endog forstærket sin betydning.

Anmeldelse af: Afghantsy. The Russians in Afghanistan 1979-89

DEFF Research Database (Denmark)

Vestenskov, David

2012-01-01

Baseret på nyligt afklassificeret materiale fra arkiverne i Moskva samt fremstillinger af russiske historikere, tegnes et anderledes og mere nuanceret billede af de sovjetiske erfaringer fra Afghanistan. De første spadestik til opgøret med den amerikanske stempling af den sovjetiske ageren i...

Antitrombotisk behanding af patienter med valvulær atrieflimren

DEFF Research Database (Denmark)

Bovin, Ann; Christensen, Thomas Decker; Grove, Erik Lerkevang

2017-01-01

with valvular AF. Although the definition of valvular AF is disputed, the lack of evidence regarding the use of NOACs for these patients is not. We discuss the definition of valvular AF, the risk of thromboembolism, and the antithrombotic treatment for stroke prevention in these patients....

An Approach to Maximize Weld Penetration During TIG Welding of P91 Steel Plates by Utilizing Image Processing and Taguchi Orthogonal Array

Science.gov (United States)

Singh, Akhilesh Kumar; Debnath, Tapas; Dey, Vidyut; Rai, Ram Naresh

2017-10-01

P-91 is modified 9Cr-1Mo steel. Fabricated structures and components of P-91 has a lot of application in power and chemical industry owing to its excellent properties like high temperature stress corrosion resistance, less susceptibility to thermal fatigue at high operating temperatures. The weld quality and surface finish of fabricated structure of P91 is very good when welded by Tungsten Inert Gas welding (TIG). However, the process has its limitation regarding weld penetration. The success of a welding process lies in fabricating with such a combination of parameters that gives maximum weld penetration and minimum weld width. To carry out an investigation on the effect of the autogenous TIG welding parameters on weld penetration and weld width, bead-on-plate welds were carried on P91 plates of thickness 6 mm in accordance to a Taguchi L9 design. Welding current, welding speed and gas flow rate were the three control variables in the investigation. After autogenous (TIG) welding, the dimension of the weld width, weld penetration and weld area were successfully measured by an image analysis technique developed for the study. The maximum error for the measured dimensions of the weld width, penetration and area with the developed image analysis technique was only 2 % compared to the measurements of Leica-Q-Win-V3 software installed in optical microscope. The measurements with the developed software, unlike the measurements under a microscope, required least human intervention. An Analysis of Variance (ANOVA) confirms the significance of the selected parameters. Thereafter, Taguchi's method was successfully used to trade-off between maximum penetration and minimum weld width while keeping the weld area at a minimum.

Flexicurity - afklaring af et begreb i bevægelse

DEFF Research Database (Denmark)

Larsen, Flemming; Madsen, Per Kongshøj; Bredgaard, Thomas

2007-01-01

Flexicurity er et begreb på vandring. Det blev opfundet i Holland i midten af 1990erne, og er siden blevet en samlebetegnelse for det danske arbejdsmarkedssystem. Aktuelt er opnåelse af flexicurity blevet til topprioriteten for EU-kommissionens forsøg på reformer af arbejdsmarkedsområdet. Dermed...... bliver det et begreb som alle medlemslande er tvunget til at forholde sig til. Flexicurity er med andre ord en retorisk succes. I denne artikel søger vi at dokumentere begrebets sejrsvandring. Den politiske og akademiske omfavnelse af flexicurity indebærer imidlertid en risiko for at begrebet udvandes......, og bliver meningsløst. Vi diskuterer derfor forskellige definitioner af flexicurity for at opnå en større klarhed over, hvad der bør og kan forstås ved flexicurity, og giver til slut et bud på en ny forståelse af flexicurity som analytisk begreb....

Randomiseret klinisk undersøgelse af effekten af kognitiv adaptationstræning: design og metodediskussion

DEFF Research Database (Denmark)

Hansen, Jens Peter; Østergaard, Birte; Nordentoft, Merete

2009-01-01

  Kognitiv adaptations træning er afprøvet gennem randomiserede studier i udlandet, men er ikke afprøvet på nydebuterede patienter, som modtager intensiv pleje og behandling. I denne artikel præsenteres et forskningsprojekt, som skal afgøre om kognitiv adaptations træning er velegnet i en dansk...... kontekst som supplement til nuværende tilbud til patienter med debuterende skizofreni. Studiet gennemføres som et randomiseret multicenter forsøg, hvor 164 konsekutivt inkluderede patienter fordeles til henholdsvis kognitiv adaptations træning og standardbehandling. Effekten af interventionen evalueres med......, fordelingsprocedure, bortfald, udvælgelse af patienter og sammenlignelighed mellem tilknyttede centre. Dette studie er det første studie, hvor kognitiv adaptations træning sammenlignes med et ambulant tilbud bestående af psykiatrisk behandling kombineret med hyppige hjemmebesøg ved distriktssygeplejersker. Studiet...

Pædagogers formidling af naturen i naturbørnehaver

DEFF Research Database (Denmark)

Ejbye-Ernst, Niels

2012-01-01

, interviews, andenordensrefleksioner og udsagn fra 500 pædagoger) giver mulighed for triangulering af resultaterne (Denzin & Lincoln 1998) og dermed mulighed for at belyse området alsidigt. I forskningsprojektets sigte indgår både en analyse af feltet gennem gennemgribende iagttagelser af pædagogers...

Microstructure characteristics and mechanical properties of laser-TIG hybrid welded dissimilar joints of Ti-22Al-27Nb and TA15

Science.gov (United States)

Zhang, Kezhao; Lei, Zhenglong; Chen, Yanbin; Liu, Ming; Liu, Yang

2015-10-01

Laser-TIG-hybrid-welding (TIG - tungsten inert gas) process was successfully applied to investigate the microstructure and tensile properties of Ti-22Al-27Nb/TA15 dissimilar joints. The HAZ of the arc zone in Ti-22Al-27Nb was characterized by three different regions: single B2, B2+α2 and B2+α2+O, while the single B2 phase region was absent in the HAZ of the laser zone. As for the HAZ in TA15 alloy, the microstructure mainly contained acicular α‧ martensites near the fusion line and partially remained the lamellar structure near the base metal. The fusion zone consisted of B2 phase due to the relatively high content of β phase stabilizing elements and fast cooling rate during the welding process. The tensile strength of the welds was higher than that of TA15 alloy because of the fully B2 microstructure in the fusion zone, and the fracture preferentially occurred on the base metal of TA15 alloy during the tensile tests at room temperature and 650 °C.

Retsbeskyttelsen af fostre og befrugtede æg

DEFF Research Database (Denmark)

Herrmann, Janne Rothmar

tydeliggøres og analyseres forskellige problemstillinger: -Abort og fosterreduktion - Fosterdiagnostik - Fosteret som patient og forsøgsperson - Anvendelse af føtale celler og væv - Fosterets status som afdød - Fertilitetsbehandling og sortering af befrugtede æg - Fertilitetsturisme - Stamcelleforskning...

Selskaberne er en del af staten

DEFF Research Database (Denmark)

Hein Jessen, Mathias

2016-01-01

Lækket af Panama Papers fremhæver endnu engang den paradoksale rolle, ikke mindst multinationale selskaber spiller i politik og økonomi: De er både skabt af staten, og fremstår stadig som uden for og i opposition til staten. Hvis vi vil gøre noget ved problemet, må vi forstå, hvordan stat og...

Omrids af en trækultur

DEFF Research Database (Denmark)

Rauff Greisen, Johannes

2007-01-01

høje prioritering af de fysiske rammer kan aflæses i de store linjer såvel som i de redelige detaljer. Artiklens spørgsmål er, hvorledes håndværkstraditionens kvaliteter og kerne kan overleveres til det moderne byggeri, der også i Vorarlberg i stigende grad præges af industrialiseringen, samt i hvilke...

On the Generalized Correlation Equation of Welding Current for the Tig Welding Machine Used in Nuclear Fuel Fabrication

International Nuclear Information System (INIS)

Umar, Efrizon

1995-01-01

In nuclear fuel fabrication, welding plays a very important role to join the end cap to the tube. In order to determine the welding current in TIG welding process for various materials, weld geometries and welding rates, the correlation between the welding current and the other parameters are needed. This paper presents the correlation of those parameters mentioned above. The proposed correlation was tested and produced satisfactory results. (author). 8 refs., 2 tabs., 2 figs

AF Sites

Science.gov (United States)

AF Bands Air Force Band Recordings Air National Guard Band of the Midwest Air National Guard Band of U.S. Air Force Bands U.S. Air Force Heartland of America Band U.S. Air Force Heritage of America Band U.S. Air Forces in Europe Band US Air Forces Central Command Band Medical 42d Medical Group 59th

Arbejdsformer under anvendelse af 4. generationsværktøjer

DEFF Research Database (Denmark)

Christensen, Søren; Grønbæk, Kaj; Rolskov, Tove

En belysning af sammenhængen mellem arbejdsformer og anvendelse af 4. generationsværktøjer i systemudvikling -- baseret på en undersøgelse af 9 systemudviklingsprojekter og et litteraturstudium...

Logning af teledata i lyset af Tele2-dommen

DEFF Research Database (Denmark)

Lentz, Lene Wacher

2017-01-01

De danske teleudbydere har siden 2007 været underlagt en pligt efter logningsbekendtgørelsen til at registrere data om al telekommunikation for at sikre at data er tilgængelige ved en eventuel senere efterforskning. Logningspligten må nu revideres og i vidt omfang afvikles som følge af EU-domstol...

Opfattelser af integration blandt unge med migrantbaggrund

DEFF Research Database (Denmark)

Skytte, Marianne; Bryderup, Inge

2014-01-01

I artiklen formidles analyser af otte interview med unge med migrantbaggrund. Der er fokus på de unges oplevelser og opfattelser af integration. Der er tale om komplekse processer og vekselvirkninger i forholdet mellem de samfundsmæssige kategoriseringer og individernes selvopfattelser. De unge o...

T.I.G. Welding of stainless steel. Numerical modelling for temperatures calculation in the Haz

International Nuclear Information System (INIS)

Martinez-Conesa, E. J.; Estrems-Amestoy, M.; Miguel-Eguia, V.; Garrido-Hernandez, A.; Guillen-Martinez, J. A.

2010-01-01

In this work, a numerical method for calculating the temperature field into the heat affected zone for butt welded joints is presented. The method has been developed for sheet welding and takes into account a bidimensional heat flow. It has built a computer program by MS-Excel books and Visual Basic for Applications (VBA). The model has been applied to the TIG process of AISI 304 stainless steel 2mm thickness sheet. The welding process has been considered without input materials. The numerical method may be used to help the designers to predict the temperature distribution in welded joints. (Author) 12 refs.

Studerendes mulighed for opnåelse af kompetence til udvikling af professionen i positionen mellem central styring og decentral autonomi

DEFF Research Database (Denmark)

Dau, Susanne

Dette paper bygger på et casestudie af implementeringen af blended læring i to professionsuddannelser ved University College Nord i Danmark. I paperet afdækkes studerendes udfordringer i positionen mellem central styring og decentral autonomi: 1) På den ene side de ydre styringsbetingelser, og...... kompetencemål skal de studerendes opnå selvstyret læring for at kvalificere sig til kommende profession, videreuddannelse, livslang læring og professionsudvikling. Denne kvalificering kan være i risiko for at blive undergravet af den centrale styring. På baggrund heraf undersøges problemstillingen: Hvordan......, praktikken og de studerendes fremtidige professionspraksis. Det anbefales, at der arbejdes både centralt og decentralt med at minimere de studerendes dilemmaposition mellem central styring og autonomi til gavn for samfundet og brugerne af de professionelles ydelser....

Braze Welding TIG of Titanium and Aluminium Alloy Type Al – Mg

Directory of Open Access Journals (Sweden)

Winiowski A.

2016-03-01

Full Text Available The article presents the course and the results of technological tests related to TIG-based arc braze welding of titanium and AW-5754 (AlMg3 aluminium alloy. The tests involved the use of an aluminium filler metal (Al99.5 and two filler metals based on Al-Si alloys (AlSi5 and AlSi12. Braze welded joints underwent tensile tests, metallographic examinations using a light microscope as well as structural examinations involving the use of a scanning electron microscope and an X-ray energy dispersive spectrometer (EDS. The highest strength and quality of welds was obtained when the Al99.5 filler metal was used in a braze welding process. The tests enabled the development of the most convenient braze welding conditions and parameters.

Forekomst af resistente bakterier og forbrug af antibiotika til hunde

DEFF Research Database (Denmark)

Pedersen, Karl; Pedersen, Kristina; Jensen, Helene

2007-01-01

), Pasteurella multocida (n=25), Bordetella bronchiseptica (n=14), Proteus spp. (n=29), og E. coli (n=449). I undersøgelsen anvendtes data fra VetStat databasen. Størstedelen af de antibiotika, der bruges til hunde er bredspektrede. Penicilliner med udvidet spektrum, cephalosporiner samt sulphonamider...

Transkateterlukning af venstre atriums aurikel til forebyggelse af apoplexia cerebri

DEFF Research Database (Denmark)

Loupis, Anastasia M; De Backer, Ole; Ihlemann, Nikolaj

2014-01-01

In patients with atrial fibrillation (AF) and increased risk of stroke, oral anticoagulation (OAC) is the standard treatment for stroke prevention - however, this therapy also carries a high risk of bleeding. Percutaneous closure of the left atrial appendage (LAA) has been suggested to be an alte...

The narrow-gap TIG welding concerns the electric power plants manufacturers

International Nuclear Information System (INIS)

Anon.

2009-01-01

Polysoude, France, played host to an expert forum on narrow gap welding from 5-7 November 2008. The successful event welcomed around one hundred experts.The power plant construction sector is currently booming worldwide. For plant construction this means using more pressure-resistant, thick-walled pipes made from high temperature steels. The key quality features of this new steel grade are the values for high creep rupture strength that also apply without restriction as the benchmark for every weld seam on these pipes. In particular, the forum on narrow gap welding addressed this area of automated welding technology. During the forum, Mr Hans-Peter Mariner (Polysoude's CEO), has offered an in-depth insight into the latest developments in narrow gap welding. This presentation highlighted that with wall thicknesses of over 60 mm, welding time is shortened by a factor of five to ten in comparison to conventional TIG processes with a traditional V seam. The welding characteristics of the parent material are the decisive factor in the application of the narrow gap process. Technical advances in equipment technology such as automatic centring, HF-free ignition, seam preparation and optimised gas protection further increase the application limits. The geometry and gap width of the weld groove are based on the mechanical properties of the materials being joined, with the shrinkage characteristics of the seam being particularly important. Another key part of the programme was a presentation on the three different narrow gap-welding techniques. The first involves a single pass weld per layer and torch or work-piece revolution. The second is dual pass welding next to one another, when the seam preparation or positioning exceed the required narrow tolerances of a few tenths of a millimetre for one stringer bead per layer. TIG narrow gap welding with a shuttle-motion electrode is ideal with very large wall thicknesses of 150-200 mm. This is particularly the case if the

“All That Jazz” - bagsiden af showbizz

DEFF Research Database (Denmark)

Eigtved, Michael

2017-01-01

Artiklen, der er skrevet til programmet ifbm premieren på musicalen Chicago på Det Ny Teater beskriver den tendens i broadwaymusicals, som begynder i slutningen af 1960’erne med bla forestillingen Cabaret, hvor det er skyggesiden af underholdningens industrien, der selvrefleksivt er emnet for for...

Anvendelse af webkonference på Syddansk Universitet

DEFF Research Database (Denmark)

Kjær, Christopher; Christensen, Inger-Marie F.; Blok, Rasmus

2009-01-01

Artiklen videregiver en række praktiske erfaringer med anvendelse af webkonferencesystemet Adobe Connect Pro i forbindelse med undervisning på Syddansk Universitet (SDU). Via tre pilotprojekter fra forskellige fagområder præsenteres de første konkrete og indledende erfaringer med anvendelsen af det...

Ingeniørens rolle ved skabelse af innovative koncepter

DEFF Research Database (Denmark)

McAloone, Tim C.

2007-01-01

sågar også konkurrencer for skolebørn. En af årsagerne til konkurrencerne, er, at mange virksomheder anser konceptudviklingsaktiviteten for værende af stigende vigtighed. Det er interessant at bemærke, når man studerer disse forskellige konkurrencers rammer, regler og mål, at fællesnævneren for alle...... "innovative koncepter"? Først vedrørende en forståelse af "innovation" i den industrielle kontekst. Udover den relativt sikre og simplistiske definition af: innovation = opfindelse + markedsmæssig succes, er der kun ganske få forsøg i den danske industrikontekst på at definere målene for, eller aktiviteterne...... skabt (kerne produktindhold). Indtil videre er der ikke blevet leveret nogle af disse pc?er, så den kan stadig betragtes som et koncept. Men man har i hvert fald gjort sit bedste for at overveje alle teknologiske, sociale og design-aspekter af konceptet. Moralen her er, at vi ingeniører skal skærpe...

The influence of TIG-Arc physical characteristics on the penetration and weld width under different Ar and He supply conditions

Science.gov (United States)

Dai, Hongbin; Shen, Xiuqiang; Wang, Haoran

2018-06-01

In the paper, the 5A03 aluminium alloy was employed to study the influence of TIG arc on the penetration and the weld width. And the split anode method with water-cooled copper plate was used to measure and record the distribution of arc current, under different flow ratio of argon and helium conditions. And a gas supply device controlled by a solenoid valve was employed to obtain the stable TIG welding arc of gas supply alternately at the frequency of 1 Hz and 4 Hz, and then collected the phenomenon of arc alternate by the high-speed camera. The experimental results indicated that the current density at the arc anode center of argon and helium supply alternately with different mixing ratio is lower than that of the pure argon-arc center. Nonetheless, the former is more uniform in current density within 2 mm from the arc center. Furthermore, it presented as a component arc of argon-arc and helium-arc switched, with the condition of argon and helium supply alternately at a frequency of 1 Hz and the arc power density is greater and concentrated, leading to the wider and deeper weld.

Effect of current and travel speed variation of TIG welding on microstructure and hardness of stainless steel SS 316L

Science.gov (United States)

Jatimurti, Wikan; Abdillah, Fakhri Aulia; Kurniawan, Budi Agung; Rochiem, Rochman

2018-04-01

One of the stainless steel types that widely used in industry is SS 316L, which is austenitic stainless steel. One of the welding methods to join stainless steel is Tungsten Inert Gas (TIG), which can affect its morphology, microstructure, strength, hardness, and even lead to cracks in the weld area due to the given heat input. This research has a purpose of analyzing the relationship between microstructure and hardness value of SS 316L stainless steel after TIG welding with the variation of current and travel speed. The macro observation shows a distinct difference in the weld metal and base metal area, and the weld form is not symmetrical. The metallographic test shows the phases that formed in the specimen are austenite and ferrite, which scattered in three welding areas. The hardness test showed that the highest hardness value found in the variation of travel speed 12 cm/min with current 100 A. Welding process and variation were given do not cause any defects in the microstructure, such as carbide precipitation and sigma phase, means that it does not affect the hardness and corrosion resistance of all welded specimen.

Estudo da Técnica Tig Keyhole por Meio do Análise Comparativo entre Duas Tochas de Alta Produtividade na União de Chapas de Aço Carbono de Meia Espessura

OpenAIRE

Olivares, Erick Alejandro González; Silva, Régis Henrique Gonçalves e; Dutra, Jair Carlos

2015-01-01

Resumo Na bibliografia de referência comum, a soldagem por meio da técnica Keyhole sempre foi associada a processos de soldagem com uma alta concentração de energia, como o processo Laser ou o processo Plasma. Novos avanços em tochas TIG estão mudando a forma em como o processo de soldagem TIG deveria ser considerado. Um exemplo desses novos avanços é a tocha comercialmente conhecida como Infocus, que segundo seus fabricantes a principal característica da tocha é a capacidade de concentração ...

Lukning og indskrænkninger af virksomheder

DEFF Research Database (Denmark)

Pico Geerdsen, Peter; Høgelund, Jan; Larsen, Mona

Der tales meget om de negative konsekvenser af globalisering. I denne rapport søger forfatterne at vurdere risikoen for svagere tilknytning til arbejdsmarkedet og forringet indkomstudvikling blandt fratrådte lønmodtagere i de dele af industrien, der er særligt udsat for konkurrence fra...

Digitalisering af undervisning

DEFF Research Database (Denmark)

Christiansen, René B.; Hansen, Søren; Rossen, Svend

2010-01-01

Rapporten er et bestillingsarbejde fra FU (Forskning og Udvikling) og viser en række eksempler på hvorledes undervisningsforløb kan konstrueres online. Herunder ved brug af både LMS-systemer og web 2.0-værktøjer...

Somatisk embryogense og kryopræservering af eg og bøg

DEFF Research Database (Denmark)

MMH Kristensen, Michel; Find, Jens; Krogstrup, Peter

Somatisk embryogenese og kryopræservering af eg og bøg Traditionel vegetativ formering af eg og bøg er vanskeligt, dyrt og har ingen større praktisk anvendelse i skovbruget. Opbevaring af agern og bog i frøbanker erligeledesproblematiskidetspiringsevnenfalderdramatiskalleredeiløbetafdetoførsteåre......Somatisk embryogenese og kryopræservering af eg og bøg Traditionel vegetativ formering af eg og bøg er vanskeligt, dyrt og har ingen større praktisk anvendelse i skovbruget. Opbevaring af agern og bog i frøbanker...... holdbarheden er flere hundrede år. Arbejdet med eg og bøg er en del af et større projekt, Videreudvikling af bioteknologiske metoder, med henblik på forædling og opbevaring af plantegenetiske ressourcer for skovtræer i Danmark 2003- 2006. Det overordnede formål med projektet var at udvikle metoder til...

Test af et satellitbaseret kørselsafgiftssystem

DEFF Research Database (Denmark)

Sørensen, Simon Bojer; Lahrmann, Harry

2007-01-01

I dette paper beskrives opbygningen af en model af et takstsystem, som skal fungere i et satellitbaseret kørselsafgiftssystem. Modellen er forholdsvis simpel og bygger på et buffersystem, og der anvendes således ikke nogen avanceret map matching. Det beskrives, hvordan modellen afprøves med tilfæ...

Sparring på evaluering af Destination Trivsel

DEFF Research Database (Denmark)

Schulz, Anette

, konklusion – hvor udsagn fra elever i henholdsvis indskolingen, mellemtrinnet og udskolingen indledningsvist behandles separat og deskriptivt. Efterfølgende er data analyseret med afsæt i en kryds-case-analyse, hvor der på baggrund af den deskriptive analyse koblet til de respektive målgrupper er udledt en...

Tilsætning af uorganisk og organisk kobber til smågrisefoder

DEFF Research Database (Denmark)

Maribo, Hanne; Poulsen, Hanne Damgaard

2011-01-01

Et højt indhold af kobber i foderet udgør en risiko for belastning af miljøet, og en begrænsning i udledningen af kobber er derfor ønskelig. Brug af organisk bundet kobber (kobberlysin) som alternativ til uorganisk kobber (kobbersulfat) i foderblandinger kan muligvis begrænse det totale forbrug af...

En kvalitativ undersøgelse af gravides valg af nakkefoldscanning

DEFF Research Database (Denmark)

Sørensen, Stina Lou; Dahl, Katja; Beck risør, Mette

2007-01-01

valg. Vi ønskede at undersøge informationens rolle i den gravides forståelse og valg af nakkefoldskanning. Materiale og metoder: Seksogtyve gravide blev interviewet efter første svangrekonsultation og igen efter misdannelseskanningen. Undersøgelsesresultaterne i denne artikel stammer primært fra første...

Analyse af IPCC delrapport 2 - Effekter, klimatilpasning og sårbarhed

DEFF Research Database (Denmark)

Christensen, Jens Hesselbjerg; Arnbjerg-Nielsen, Karsten; Grindsted, Aslak

. Med afsæt i denne delrapport er der udarbejdet en dansk analyse, der nærmere beskriver effekterne af et ændret klima i Danmark suppleret med den seneste danske forskning udført af det danske Center for Regional Changes in the Earth System (CRES). ”Analyse af IPCC delrapport 2 – Effekter...

Udviklingen på afsætningsmarkederne for dansk svinekød

DEFF Research Database (Denmark)

Jeppesen, Lisbeth Fruensgaard; Bredahl, Lone; Fjord, Thomas Ahle

Danmark er verdens niende største producent af svinekød. Ca. 85% af den danske produktion afsættes i udlandet fordelt på ganske få hovedmarkeder. I Europa er de primære aftagere Tyskland, Storbritanien, Frankrig, Italien, mens Japan er det vigtigste marked uden for Europa, efterfulgt af Rusland...

Modellering og måling af metan-emission fra kvæg

DEFF Research Database (Denmark)

Storm, I; Hellwing, Anne Louise Frydendahl; Nielsen, N I

2011-01-01

Udvikling af og kendskab til de metoder, der bruges til måling af kvægs metan-emission udgør en vigtig del af forskningen indenfor området. I dette indlæg præsenteres de mest anvendte metoder til måling og estimation af kvægs metan-emission, herunder modeller, in vitro inkubation, kammer-metoder,......-metoder, SF6-metoden og CO2-metoden. De enkelte metoder beskrives og fordele, ulemper og anvendelsesområder sammenlignes. Dette er vigtig baggrundsinformation for forståelse og fortolkning af øvrige forskningsresultater og for at kunne planlægge fremtidige projekter.......Udvikling af og kendskab til de metoder, der bruges til måling af kvægs metan-emission udgør en vigtig del af forskningen indenfor området. I dette indlæg præsenteres de mest anvendte metoder til måling og estimation af kvægs metan-emission, herunder modeller, in vitro inkubation, kammer...

Prioriteringer af efterretninger i kampen mod terror

DEFF Research Database (Denmark)

Nielsen, Thomas Galasz

2015-01-01

Efterretningstjenesterne indsamler stadig flere informationer i forsøget på at opdage og imødegå terrorister. Men mængden af informationer gør det ikke nødvendigvis lettere at forudsige terrorhandlinger. Efterretningstjenesterne bør derfor prioritere bearbejdning af oplysningerne højere, end de g...

Skattemæssig behandling af virtuelle valutaer

DEFF Research Database (Denmark)

Kjærsgaard, Louise Fjord; Weber, Katja Dyppel

2018-01-01

Udbredelsen og anvendelsen af virtuelle valutaer er stigende, og der synes derfor behov for en analyse af den skattemæssige kvalifikation og behandling heraf. Skatterådet har ved to lejligheder haft mulighed for at foretage denne analyse; i henholdsvis SKM2014.226.SR om Bitcoins og SKM2017.520.SR...

Effekt evaluering af Svangre-Føde Journal i Region Nordjylland

DEFF Research Database (Denmark)

Barlach, Anders

Formål: Evalueringen beskæftiger sig med effekt data opsamlet under anvendelse af den eksisterende papir journal og CSC Clinical Suite Svangre-føde Journal hos de gravide der mødte frem på fødegangen på Ålborg Sygehus før og under pilot implementeringen i maj 2011, og på fødegangen Hjørring Sygehus...... specifikationer og prototyper der også tager stilling til en organiseringen af målinger med henblik på evaluering. Den teoretiske gennemgang efterfølges af den konkrete fremstilling af måle- og evalueringsdesign af Svangre-føde journalen i Region Nordjylland. Resultaterne er genstand for en statistisk...

De dankse domstoles håndtering af CISG

DEFF Research Database (Denmark)

Lookofsky, Joseph

2012-01-01

Købelovskonventionen (CISG) forpligter de danske domstole til at tage hensyn til traktatens internationale karakter og til behovet for at fremme ensartet anvendelse af den. Artiklen peger på, at danske domspræmisser efterlader indtryk af sjældent at tage hensyn til disse pligter. Problemet - som...... parternes advokater er med til at skabe - understreges af fodnoten til en højesteretsdom, der synes at bekræfte, at de danske CISG-sager endnu ikke kører på det internationale spor....

"Filosofiske og æstetiske overvejelser over digitalisering af musik og lyd."

DEFF Research Database (Denmark)

Grund, Cynthia M.

Digitalisering af musik og lyd har vidtgående konsekvenser for flere områder inden for musikfilosofi og beslægtede områder, da det indbyder til gentænkning af traditionelle spørgsmål inden for æstetik samt afdækning af nye. Foredraget vil give en perspektivering over, hvordan digitalisering af...

Langtidseffekten af intervention på børns eksponering for bly

DEFF Research Database (Denmark)

Nielsen, Jesper Bo; Kristiansen, Jesper

Resumé I 2003 blev der gennemført en undersøgelse (miljøprojekt nr. 845) af effekten af de tiltag, der anbefales i Miljøstyrelsens vejledning nr. 7 2000 "Rådgivning af beboere i lettere forurenede områder". Projektet viste en reduktion af eksponeringen efter interventionen i de to let forurenede ...

Eksperimentel bakteriofagterapi til behandling af kronisk Pseudomonas aeruginosaotitis hos hund

DEFF Research Database (Denmark)

Moodley, Arshnee; Mølgaard, Jesper

2016-01-01

Vi beskriver en case med anvendelsen af bakteriofager til behandling af kronisk otitis forårsaget af multiresistente Pseudomonas aeruginosa som en sidste behandlingsmulighed før aflivning. Trods gentagne behandlinger, både topikalt og systemisk, med op til seks forskellige antibiotika over en...

Hastighedsændringer som følge af ombygning af enkeltsporede rundkørsler i landzone til modulvogntog

DEFF Research Database (Denmark)

Tønning, Charlotte; Agerholm, Niels

2017-01-01

undtagelse af etableret overkørbart overkørselsareal i den ene. Personbilers free flow hastighed var undersøgt ved hjælp af RUBA software ud fra én uges videoregistrering i hver rundkørsel. I rundkørslen, hvor det overkørbare overkørselsareal var blevet etableret, steg gennemsnitshastigheden fra 28 til 36 km...

Er genomisk selektion en revolution af avlsarbejdet med mink?

DEFF Research Database (Denmark)

Berg, Peer

2011-01-01

Genomisk selektion udnytter, at den enkelte mink kan genotypes for tusindvis af genetiske markører. Et dyrs avlsværdi kan skønnes med ret stor sikkerhed på basis af en blod- eller hårprøve, hvor dyrets sæt af genetiske markører bestemmes. Det er altså ikke nødvendigt at registrere minkens egne eg...

Opfindelsen af naturen

DEFF Research Database (Denmark)

Thomsen, Torsten Bøgh

2016-01-01

Kritisk omtale og kontekstualisering af Andrea Wulfs, "The Invention of Nature: Alexander von Humboldt’s New World". Der er en direkte forbindelse imellem oplysningstidens naturforståelse og den nuværende klimakrisevirkelighed. Alexander von Humboldt opfandt ikke bare naturen, han påpegede også det...

Fastholdelse af erhvervsskoleelever i det danske erhvervsuddannelsessystem

DEFF Research Database (Denmark)

Nielsen, Klaus; Jørgensen, Christian Helms; Koudahl, Peter

2013-01-01

Forskningsprojektet ”Retention of Vocational Students in the Danish VET System” undersøger de påvirkelige faktorer, der kan bidrage til at mindske frafaldet på de erhvervsfaglige uddannelser (EUD). For etablering af en sådan viden er dannet et konsortium bestående af såvel forskere med stor...

Bekæmpelse af social dumping er også en kommunal opgave

DEFF Research Database (Denmark)

Baadsgaard, Kelvin; Jørgensen, Henning

2018-01-01

Kommunal indsats mod social dumping er en væsentlig del af den samlede indsats, og en evaluering af Københavns Kommunes indsats har givet indsigt i nogle af betingelserne for at få effektiviseret en sådan. Dette er også fulgt op politisk.......Kommunal indsats mod social dumping er en væsentlig del af den samlede indsats, og en evaluering af Københavns Kommunes indsats har givet indsigt i nogle af betingelserne for at få effektiviseret en sådan. Dette er også fulgt op politisk....

Coaching af sygedagpengemodtagere

DEFF Research Database (Denmark)

Coop Henriksen, Annemette

SFI gennemførte i foråret 2008 til foråret 2009 en pilotundersøgelse om coaching. Undersøgelsen var designet som et lodtrækningsforsøg og omfattede 42 kvindelige sygedagpengemodtagere fra Rødovre Jobcenter, der var sygemeldt med psykiske lidelser i form af stress, depression eller udbrændthed eller...... med lidelser i bevægeapparatet. Undersøgelsen er bestilt og finansieret af Rødovre Jobcenter. I rapporten undersøges, om coaching kan bidrage til at bringe sygedagpengemodtagere i arbejde eller tættere på arbejdsmarkedet målt ved, om deltagerne får fx øget motivation, mere selvtillid, øget afklaring...... og færre symptomer på sygdom. Undersøgelsen viser, at gruppen, der har modtaget coaching, oplever en positiv udvikling i forhold til stress, depression og udbrændthed. Gruppen, der modtog coaching, har den tydeligste positive udvikling, men begge grupper har oplevet en helbredsmæssig fremgang i...

Tilblivelsen af det ny nordiske køkken

DEFF Research Database (Denmark)

Scheuer, John Damm; Nickelsen, Niels Christian

2009-01-01

Denne artikel er en analyse af en organisatorisk transformations indledende fase. Konkret den fase, hvor en institutionel entreprenør undfanger en idé, der bryder med eksisterende logikker i et organisatorisk felt og derved skaber et potentiale for forandring ved at udfordre eksisterende logikker...... institutionel entreprenør kan initiere forandring i et organisatorisk felt, samt en afprøvning af et begrebsapparat opstillet af Svejenova et al. (2007). Analysen knytter an til agens/struktur problematikken. Hvor neo-institutionelle analyser samt andre sociologisk orienterede analyser enten undereksponerer....... Analysens gennemgående empiriske forankringspunt er det gastronomiske felt i Danmark og i Norden og mere specifikt; kokken og entreprenøren Claus Meyers ambitioner om at virkeliggøre en madpolitisk vision. Artiklens teoretiske bidrag er en begrebsliggørelse, præcisering og nuancering af, hvordan en...

Opdeling af dækningskvalitet for håndholdt mobiltelefoni

DEFF Research Database (Denmark)

Pedersen, Gert Frølund

2013-01-01

På baggrund af målinger af radiomodtagerkvaliteten af mobiltelefoner på markedet foreslås en opdeling i fem klasser – fra meget god til ringe. Opdelingen er baseret på håndholdt brug til tale af mobiltelefoner på steder med svag mobildækning. Her vælger mobiltelefonsystemet frekvensen 900 MHz og ...... det system, der er mest udbredt, nemlig GSM. Derved fås den bedste radiodækning og derfor foreslås mobiltelefonerne klassificeret efter GSM900 modtagerkvaliteten....

Behandling af digital dermatitis på KFC

DEFF Research Database (Denmark)

Krogh, Kenneth; Thomsen, Peter

2008-01-01

På Kvægbrugets Forsøgscenter blev de rutinemæssige klovbade i maj 2007 erstattet med månedlige tjek af klove i beskærerboks og behandling af klovlidelser, herunder især Digital Dermatitis. Behandlingseffekten har været høj med 90 % helbredte efter en måned. Udgivelsesdato: april 2008...

Forekomst af parodontitis og FORL hos perserkatte

DEFF Research Database (Denmark)

Flørnæs, Maria L. Topholm; Lund, Mette; Kortegaard, Hanne Ellen

2007-01-01

I dette studie er omfanget af tandrelaterede sygdomme heriblandt parodontitis og feline odontoklastiske resorptions læsioner (FORL) blandt 19 perserkatte (heraf 2 exotics) på 3 til 9 år undersøgt både klinisk og radiografisk. Ingen af kattene havde tidligere fået renset tænder i anæstesi. Alle ka...

Spøger Gøgereden stadig i opfattelsen af psykiatrien?

DEFF Research Database (Denmark)

Hansen, Jette Barnholdt

2015-01-01

Artiklen fremstår som en retorisk kritik af filmen Gøgereden (1975), der ofte genudsendes på dansk fjernsyn. Filmen er påvirket af antipsykiatrien og videreudvikler de metaforer, som introduceres af bl.a. Thomas Szasz. Jeg diskuterer filmens potentielle indflydelse på psykiatriens aktuelle omdømme...

Skalaer til måling af elevtrivsel på erhvervsuddannelserne

DEFF Research Database (Denmark)

Keilow, Maria; Holm, Anders

Rapporten redegør for udviklingen af skalaer for trivsel blandt erhvervsskoleelever. På baggrund af data fra eksisterende trivselsmålinger foretaget blandt erhvervsskoleelever i 2013-2014, bidrager rapporten til udvikling af skalaer og indgår således i arbejdet med fremover at foretage valide mål...

A microstructural study of F82H-MOD. Plate, powder HIP and EB and TIG weldments

International Nuclear Information System (INIS)

Schuring, E.W.

1998-06-01

F82H is the heat identification number of a ferritic/martensitic steel. The steel has a chemical composition resulting in low activation after neutron irradiation. At ECN a microstructural study was conducted on plates of F82H (73, 15 and 25mm thick), a bar of HIPped F82H and EB and TIG welds in F82H plates. The investigation was aimed to characterise the microstructures for reference in irradiation experiments. The F82H mod. plates have a martensitic matrix with carbide precipitation on the prior austenite grain boundaries and the martensite laths. The carbide precipitation is most pronounced on the prior austenite grain boundaries. The PAG is comparable for the three plate thicknesses investigated. In two plates faint segregation bands were found with a denser carbide precipitation and 8-ferrite. Further Ta, Ti and Zr containing oxides are present. Hardness measurements show a higher overall hardness in the 25mm plate investigated compared to the 7.5 and 15mm plates. The F82H HIP bar shows a homogeneous PAG throughout the diameter. The microstructure shows a zone starting at about 1 mm below the surface with a width of 14mm, with a relatively high concentration of low precipitation density ferritic like fields, which corresponds to a zone with a 15HV5 lower hardness with respect to the rest of the bar. This zone is expected to be related to the HIP process. Further in the microstructure a circular pattern of W and Ta enriched inclusions is found, which mark the original HIP-powder grain boundaries. The EB-welds were manufactured by two manufactures and differ mostly in the heat input, resulting in differences in HAZ-width and the width of the weld cap. The F82H EB welds show comparable microstructures in the weld pool, with a martensitic microstructure free of carbides. All EB-welds contain 8-ferrite in concentrations of 0.1-1%. In the heat affected zone (HAZ), the coarse grained HAZ (CGHAZ) is free of carbide precipitation, whereas the fine grained HAZ (FGHAZ

Dilemmaer i musikterapeutisk behandling af en traumatiseret flygtning med musikerbaggrund

Directory of Open Access Journals (Sweden)

Bolette Daniels Beck

2016-12-01

Full Text Available Denne artikel præsenterer et single case-studie af et receptivt musikterapiforløb med en 55-årig syrisk flygtning, som har været udsat for fængsling og tortur på grund af sine aktiviteter som protestsanger og musiker. Der beskrives problemstillinger og dilemmaer relateret til at anvende musik, der både kan trigge traumer, men også vække indre ressourcer. Kortlægning af patientens forskellige personlighedsdele og musikkens evne til integration af dem vil blive belyst gennem teorien om strukturel dissociation.

Udvikling af materialer til affaldsforbrænding – Nye materialer til overlagssvejsning

DEFF Research Database (Denmark)

Tiedje, Niels Skat

Denne del af projektet havde til formål at udvikle en metode til hurtig benchmarking af nye legeringer til overlagssvejsning og at anvende metoden i kombination med termodynamisk modellering af mikrostrukturer i svejste Ni–baserede legeringer. På baggrund af disse analyser skulle der udvikles nye...

Optimering af økologiske produkters kvalitet (QACCP)

DEFF Research Database (Denmark)

Lauridsen, Charlotte; Kristensen, Hanne Lakkenborg; Jørgensen, Henry

2011-01-01

Forbrugerne efterspørger i stigende grad sundere og mere sikre fødevarer af høj kvalitet, og mange forbrugere har en forventning om, at økologiske fødevarer har højere kvalitet end ikke-økologiske. Det har man hidtil ikke kunnet bevise, bl.a. pga. manglen på videnskabelige undersøgelser af økolog...