WorldWideScience

Sample records for aeronautical charts

  1. SMART AERONAUTICAL CHART MANAGEMENT SYSTEM DESIGN

    Directory of Open Access Journals (Sweden)

    M. E. Pakdil

    2015-10-01

    Full Text Available Civil aviation is developing rapidly, and the number of domestic and international operations is increasing exponentially every year than the previous one. Airline companies with increased air traffic and the number of passengers increase the demand of new aircrafts. An aircraft needs not only fuel but also pilot and aeronautical information (charts, digital navigation information, flight plan, and etc. to perform flight operation. One of the most important components in aeronautical information is the terminal chart. Authorized institution in every state is responsible to publish their terminal charts for certain periods. Although these charts are produced in accordance with ICAO’s Annex 4 and Annex 15, cartographic representation and page layout differs in each state’s publication. This situation makes difficult to read them by pilots. In this paper, standard instrument departure (SID charts are analysed to produce by use of cutting-edge and competitive technologies instead of classical computer-aided drawing and vector based graphic applications that are currently used by main chart producers. The goal is to design efficient and commercial chart management system that is able to produce aeronautical charts with same cartographic representation for all states.

  2. Gulf of Mexico IFR Aeronautical Chart Index - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The IFR Enroute Aeronautical Chart series is designed to meet the needs of users who require a digital version chart. This is the visual index to the charts for the...

  3. 75 FR 11225 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-03-10

    ... Forum (ACF 10-01) to discuss informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is.... App. II), notice is hereby given of a meeting of the FAA Aeronautical Charting Forum to be held...

  4. Chart Supplements - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The Chart Supplements are searchable by individual airport in PDF format. They contain data on public and joint use airports, seaplane bases, heliports, VFR airport...

  5. 77 FR 50759 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2012-08-22

    ... (ACF) to discuss informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is separated... to Sec. 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463; 5 U.S.C. App. II), notice...

  6. 78 FR 12415 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2013-02-22

    ... informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is separated into two distinct groups. The... INFORMATION: Pursuant to Sec. 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463; 5 U.S.C. App....

  7. 75 FR 54221 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2010-09-03

    ... informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is separated into two distinct groups. The...: Pursuant to Sec. 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463; 5 U.S.C. App. II),...

  8. 78 FR 52230 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2013-08-22

    ... informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is separated into two distinct groups. The... INFORMATION: Pursuant to Sec. 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463; 5 U.S.C. App....

  9. 76 FR 53530 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2011-08-26

    ... informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria. DATES: The ACF is separated into two distinct groups. The.... 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463; 5 U.S.C. App. II), notice is...

  10. Grand Canyon VFR Chart - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The Federal Aviation Administration (FAA) digital-Visual Chart series is designed to meet the needs of users who require georeferenced raster images of a FAA Visual...

  11. 基于规则库的目视航图自动化制图%Automatic cartography for VFR aeronautical charts based on rule database

    Institute of Scientific and Technical Information of China (English)

    张文元; 许妙忠

    2011-01-01

    本文提出了一种基于规则库的目视航图自动化制图技术,详细阐述了基于规则的要素自动综合取舍、自动符号化、注记自动配置的实现方法.基于GIS COM组件开发了一个目视航图制图原型系统,通过对规则库中各种规则的配置、管理和调用,可方便快捷地制作出目视航图产品.%An automatic cartography method for VFR aeronautical charts based on rule database was introduced in this paper, and three key technologies based on rules were illustrated, including the automatization of cartographic generalization, feature symbolization and annotation placement Based on GIS Components, a prototype system of making VFR charts was developed, which could be used to make VFR aeronautical charts conveniently and quickly with the help of various pre-configured rules in rule database.

  12. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  13. Radar Chart

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Radar Chart collection is an archived product of summarized radar data. The geographic coverage is the 48 contiguous states of the United States. These hourly...

  14. [Exploring Aeronautics

    Science.gov (United States)

    Robinson, Brandi

    2004-01-01

    This summer I have been working with the N.A.S.A. Project at Cuyahoga Community College (Tri-C) under the title of Exploring Aeronautics Project Leader. The class that I have worked with is comprised of students that will enter the eighth grade in the fall of 2004. The program primarily focuses upon math proficiency and individualized class projects. My duties have encompassed both realms. During the first 2-3 weeks of my internship, I worked at NASA Glenn Research Center (GRC) researching, organizing, and compiling information for weekly Scholastic Challenges and the Super Scholastic Challenge. I was able to complete an overview of Scholastic Challenge and staff responsibilities regarding the competition; a proposal for an interactive learning system, Quizdom; a schedule for challenge equipment, as well as a schedule listing submission deadlines for the staff. Also included in my tasks, during these first 2-3 weeks, were assisting Tammy Allen and Candice Thomas with the student application review and interview processes for student applicants. For the student and parent orientation, I was assigned publications and other varying tasks to complete before the start of the program. Upon the commencement of the program, I changed location from NASA GRC to Tri-C Metro Campus, where student classes for the Cleveland site are held. During the duration of the program, I work with the instructor for the Exploring Aeronautics class, kkkk, assisting in classroom management, daily attendance, curriculum, project building, and other tasks as needed. These tasks include the conducting of the weekly competition, known as Scholastic Challenge. As a Project Leader, I am also responsible for one subject area of the Scholastic Challenge aspect of the N.A.S.A. Project curriculum. Each week I have to prepare a mission that the participants will take home the following Monday and at least 10 questions that will be included in the pool of questions used for the Scholastic Challenge

  15. Isomers chart

    International Nuclear Information System (INIS)

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10-6 s. The various isomers were classified in increasing lifetimes. (authors)

  16. Aeronautical Information System

    Data.gov (United States)

    Department of Transportation — The Aeronautical Information System (AIS) is a leased weather automated system that provides a means of collecting and distributing aeronautical weather information...

  17. Aeronautical tubes and pipes

    Science.gov (United States)

    Beauclair, N.

    1984-12-01

    The main and subcomponent French suppliers of aircraft tubes and pipes are discussed, and the state of the industry is analyzed. Quality control is essential for tubes with regard to their i.d. and metallurgical compositions. French regulations do not allow welded seam tubes in hydraulic circuits unless no other form is available, and then rustproofed steel must be installed. The actual low level of orders for any run of tubes dictates that the product is only one of several among the manufacturers' line. Automation, both in NDT and quality control, assures that the tubes meet specifications. A total of 10 French companies participate in the industry, serving both civil and military needs, with some companies specializing only in titanium, steel, or aluminum materials. Concerns wishing to enter the market must upgrade their equipment to meet the higher aeronautical specifications and be prepared to furnish tubes and pipes that serve both functional and structural purposes simultaneously. Additionally, pipe-bending machines must also perform to tight specifications. Pipes can range from 0.2 mm exterior diameter to 40 mm, with wall thicknesses from 0.02 mm to 3 mm. A chart containing a list of manufacturers and their respective specifications and characteristics is presented, and a downtrend in production with reduction of personnel is noted.

  18. Convergent Aeronautics Solutions Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Convergent Aeronautics Solutions (CAS) Project uses short-duration activities to establish early-stage concept and technology feasibility for high-potential...

  19. Achieving Aeronautics Leadership: Aeronautics Strategic Enterprise Plan

    Science.gov (United States)

    1995-01-01

    Today, more than ever, aggressive leadership is required to ensure that our national investments in aeronautical research, technology, and facilities are shaped into a coordinated, and high-impact, strategy. Under the auspices of the National Science and Technology Council, and in conjunction with the domestic industry, universities, the Department of Defense, and the Federal Aviation Administration - our partners in aeronautics - we propose to provide that leadership, and this document is our plan.

  20. 76 FR 12211 - Government/Industry Aeronautical Charting Forum Meeting

    Science.gov (United States)

    2011-03-04

    ..., from 8:30 a.m. to 5 p.m. at Advanced Management Technology, Inc. (AMTI), 1515 Wilson Boulevard... meet April 27 and 28, 2011 from 8:30 a.m. to 5 p.m. ADDRESSES: The meeting will be hosted by Advanced Management Technology, Inc. (AMTI), 1515 Wilson Boulevard, Arlington, VA 22209. FOR FURTHER...

  1. Excel 2007 Charts

    CERN Document Server

    Walkenbach, John

    2008-01-01

    Excel, the top number-crunching tool, now offers a vastly improved charting function to help you give those numbers dimension and relativity. John Walkenbach, a.k.a. Mr. Spreadsheet, clearly explains all these charting features and shows you how to choose the right chart for your needs. You'll learn to modify data within the chart, deal with missing data, format your chart, use trend lines, construct "impossible" charts, create charts from pivot tables, dress them up with graphics, and more. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.

  2. On regional geomagnetic charts

    Science.gov (United States)

    Alldredge, L.R.

    1987-01-01

    When regional geomagnetic charts for areas roughly the size of the US were compiled by hand, some large local anomalies were displayed in the isomagnetic lines. Since the late 1960s, when the compilation of charts using computers and mathematical models was started, most of the details available in the hand drawn regional charts have been lost. One exception to this is the Canadian magnetic declination chart for 1980. This chart was constructed using a 180 degrees spherical harmonic model. -from Author

  3. Robust CUSUM control charting

    NARCIS (Netherlands)

    H.Z. Nazir; M. Riaz; R.J.M.M. Does; N. Abbas

    2013-01-01

    Cumulative sum (CUSUM) control charts are very effective in detecting special causes. In general, the underlying distribution is supposed to be normal. In designing a CUSUM chart, it is important to know how the chart will respond to disturbances of normality. The focus of this article is to control

  4. Fractional smith chart theory

    KAUST Repository

    Shamim, Atif

    2011-03-01

    For the first time, a generalized Smith chart is introduced here to represent fractional order circuit elements. It is shown that the standard Smith chart is a special case of the generalized fractional order Smith chart. With illustrations drawn for both the conventional integer based lumped elements and the fractional elements, a graphical technique supported by the analytical method is presented to plot impedances on the fractional Smith chart. The concept is then applied towards impedance matching networks, where the fractional approach proves to be much more versatile and results in a single element matching network for a complex load as compared to the two elements in the conventional approach. © 2010 IEEE.

  5. Improved data driven control charts

    NARCIS (Netherlands)

    Albers, W.; Kallenberg, W.C.M.

    2007-01-01

    Classical control charts for monitoring the mean are based on the assumption of normality. When normality fails, these control charts are no longer valid and serious errors often arise. Data driven control charts, which choose between the normal chart, a parametric one and a nonparametric chart, hav

  6. Barograms / Barograph Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Barograms are weekly rectangular charts recording barometric pressure at a given station. The barograph is an instrument that makes a continuous pen and ink trace...

  7. Great Lakes Ice Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Charts show ice extent and concentration three times weekly during the ice season, for all lakes except Ontario, from the 1973/74 ice season through the 2001/2002...

  8. CDC Child Growth Charts

    Data.gov (United States)

    U.S. Department of Health & Human Services — CDC child growth charts consist of a series of percentile curves that illustrate the distribution of selected body measurements in U.S. children. Pediatric growth...

  9. State-Chart Autocoder

    Science.gov (United States)

    Clark, Kenneth; Watney, Garth; Murray, Alexander; Benowitz, Edward

    2007-01-01

    A computer program translates Unified Modeling Language (UML) representations of state charts into source code in the C, C++, and Python computing languages. ( State charts signifies graphical descriptions of states and state transitions of a spacecraft or other complex system.) The UML representations constituting the input to this program are generated by using a UML-compliant graphical design program to draw the state charts. The generated source code is consistent with the "quantum programming" approach, which is so named because it involves discrete states and state transitions that have features in common with states and state transitions in quantum mechanics. Quantum programming enables efficient implementation of state charts, suitable for real-time embedded flight software. In addition to source code, the autocoder program generates a graphical-user-interface (GUI) program that, in turn, generates a display of state transitions in response to events triggered by the user. The GUI program is wrapped around, and can be used to exercise the state-chart behavior of, the generated source code. Once the expected state-chart behavior is confirmed, the generated source code can be augmented with a software interface to the rest of the software with which the source code is required to interact.

  10. Understanding Graphs & Charts.

    Science.gov (United States)

    Cleary, John J.; Gravely, Mary Liles

    Developed by educators from the Emily Griffith Opportunity School, this teacher's guide was developed for a 4-hour workshop to teach employees how to read the charts and graphs they need in the workplace. The unit covers four types of graphs: pictographs, bar graphs, line graphs, and circle graphs. The guide is divided into four sections: reading…

  11. INIS: Terminology charts

    International Nuclear Information System (INIS)

    This document is one in a series of publications known as the INIS Reference Series. It is to be used in conjunction with the INIS indexing manual and the INIS thesaurus for the preparation of input to the INIS database. The thesaurus and terminology charts in their first edition (Rev.0) were produced as the result of an agreement between the International Atomic Energy Agency (IAEA) and the European Atomic Energy Community (Euratom). Except for minor changes the terminology and the interrelationships between terms are those of the December 1969 edition of the Euratom Thesaurus. The purpose of the terminology harts is to display the descriptors of the thesaurus in the context of their hierarchical and other semantic relationships. Hierarchically related terms are grouped in clusters, each representing one of the principal concepts of a subject field. The descriptors are grouped around or under the broadest term of the clusters which is printed in upper case. The hierarchical relationships within the clusters are shown by the arrangement of the terms in smaller boxes within the larger boxes circumscribing the clusters. The clusters are connected by lines of various thickness, representing the other (mostly non-hierarchical) relationships. These connections are the equivalent to 'see also' and 'related term' cross-references. The thickness of the lines represents the strength of the semantic relations, or, in the practice of a retrieval system the probability that one term replacing a connected term in a query, will still yield pertinent references. The figures accompanying the descriptors represent their frequency of assignment to the first 987,000 documents stored in the Euratom system (May 1970). They are presented in order to show the relative importance of the descriptors within the subject field. The asterisks (*) accompanying descriptors in the charts refer to descriptors, for which a scope note can be found in the INIS: Thesaurus at the time the charts went

  12. Weighing Rain Gauge Recording Charts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Weighing rain gauge charts record the amount of precipitation that falls at a given location. The vast majority of the Weighing Rain Gauge Recording Charts...

  13. NOAA Raster Navigational Charts (RNC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA, National Ocean Service, Office of Coast Survey, Marine Chart Division is responsible to build and maintain a suite of more than 1000 nautical charts that are...

  14. Synthetic growth reference charts.

    Science.gov (United States)

    Hermanussen, M; Burmeister, J

    1999-08-01

    Distance standards of height (growth charts) tend to get out of date and must be actualized from time to time. The aim of the present meta-analysis was to investigate characteristics of the cross sectional incremental pattern of body stature, evaluating the possibility of generating distance standards of height without the need for extensive de novo measurements. In view of the differences in growth in early and late childhood, we divided the total period of child development into the period between birth and the age of 6y, and between 6 and early adulthood (15y in females, 18 y in males). With respect to birth length, we meta-analysed 50 European and US American growth studies; with respect to growth in early childhood, 14 studies were analysed; and with respect to growth in late childhood, we meta-analysed 40 male and 51 female growth studies, from 14 European countries and the USA. Variations in body stature were meta-analysed in very large data samples, including the 1992 German birth cohort with more than 500 000 measurements of newborns, 10 000 measurements of 2-y-old German children, more than 500 000 measurements of German school children, and 6 large growth surveys of Japan and Czechoslovakia, with altogether more than 24 000 000 measurements. We found a rigid pattern of cross sectional body stature increment between birth and early adulthood that could be expressed by age-specific linear regression coefficients. Body stature was found to be related between sexes. Male birth length correlated with female length (r = 0.933, p < 0.001, slope = 4.62, intercept = 0.89), stature of 6-y-old boys correlated with stature of 6-y-old girls (r = 0.96, p < 0.001, slope = 1.05, intercept= -6.75), and stature of 18-y-old boys correlated with stature of 15-y-old girls (r=0.96, p < 0.001, slope = 0.90, intercept = 2.85). The developmental pace was also strongly related in both sexes. In conclusion, age-specific linear regression coefficients can be utilized synthetically

  15. Flash Builder charting and multimedia

    CERN Document Server

    Rocchi, Cesare

    2010-01-01

    Charting and multimedia are two vital tools for data-driven applications. Learn about the main components of the chart library included in Flash Builder, and see how to build and customize widely used charts. Turning your attention to the multimedia capabilities of the Flex framework, you will review the multimedia components built into the Flex library, and learn how to use ActionScript to manipulate video and audio files. Charting and Multimedia is the third of five articles that will be compiled in the book, Data Visualization with Flash Builder: Designing RIA and AIR Applications with Rem

  16. Growth charts of human development

    NARCIS (Netherlands)

    Van Buuren, Stef

    2014-01-01

    This article reviews and compares two types of growth charts for tracking human development over age. Both charts assume the existence of a continuous latent variable, but relate to the observed data in different ways. The D-score diagram summarizes developmental indicators into a single aggregate s

  17. 14 CFR 61.155 - Aeronautical knowledge.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical knowledge. 61.155 Section 61....155 Aeronautical knowledge. (a) General. The knowledge test for an airline transport pilot certificate is based on the aeronautical knowledge areas listed in paragraph (c) of this section that...

  18. 14 CFR 61.185 - Aeronautical knowledge.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical knowledge. 61.185 Section 61... Flight Instructors With a Sport Pilot Rating § 61.185 Aeronautical knowledge. (a) A person who is... aeronautical knowledge areas for a recreational, private, and commercial pilot certificate applicable to...

  19. 14 CFR 61.125 - Aeronautical knowledge.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical knowledge. 61.125 Section 61... Aeronautical knowledge. (a) General. A person who applies for a commercial pilot certificate must receive and... aeronautical knowledge areas of paragraph (b) of this section that apply to the aircraft category and...

  20. Aeronautics. America in Space: The First Decade.

    Science.gov (United States)

    Anderton, David A.

    The major research and developments in aeronautics during the late 1950's and 1960's are reviewed descriptively with a minimum of technical content. Topics covered include aeronautical research, aeronautics in NASA, The National Advisory Committee for Aeronautics, the X-15 Research Airplane, variable-sweep wing design, the Supersonic Transport…

  1. NASA/University Conference on Aeronautics

    Science.gov (United States)

    1975-01-01

    The proceedings of a conference on the future of aeronautics are presented. The subjects discussed include the following: (1) aeronautics and the education of the engineer, (2) technical trends in aeronautics, and (3) the role of the university in aeronautics. The technical trends in aeronautics are concerned with aircraft noise control, the effect of the aircraft on the environment, airborne electronics for automated flight, and trends in aircraft design.

  2. Emissivity measurements on aeronautical alloys

    Energy Technology Data Exchange (ETDEWEB)

    Campo, L. del, E-mail: leire.del-campo@cnrs-orleans.f [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Perez-Saez, R.B., E-mail: raul.perez@ehu.e [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain); Gonzalez-Fernandez, L. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Esquisabel, X.; Fernandez, I. [Industria de Turbo Propulsores, S.A., Planta de Zamudio, Edificio 300, 48170 Zamudio, Bizkaia (Spain); Gonzalez-Martin, P. [Industria de Turbo Propulsores, S.A., Parque empresarial San Fernando, Avda. Castilla 2, 28830 San Fernando de Henares, Madrid (Spain); Tello, M.J. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain)

    2010-01-21

    The emissivity of three Ni and Co based aeronautical alloys is analyzed in this paper. These alloys are employed in high temperature environments whenever good corrosion resistance, high temperature resistance and high strength are essential. Thus, apart from the aeronautical industry, these alloys are also used in other technological applications, as for example, aerospace, nuclear reactors, and tooling. The results in this paper extend the emissivity data for these alloys available in the literature. Emissivity dependence on the radiation wavelength (2-22 {mu}m), sample temperature (200-650 {sup o}C) and emission angle (0-85{sup o}) has been investigated. In addition, the effect of surface finish and oxidation has also been taken into consideration. The data in this paper have several applications, as temperature measurement of a target by pyrometry, low observability of airplanes and thermal radiation heat transfer simulation in airplane nozzles or furnaces.

  3. Inland Electronic Navigational Charts (IENC)

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — These Inland Electronic Navigational Charts (IENCs) were developed from available data used in maintenance of Navigation channels. Users of these IENCs should be...

  4. NOAA Electronic Navigational Charts (ENC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Office of Coast Survey (OCS) has been involved in the development of a NOAA Electronic Navigational Chart (NOAA ENC) suite to support the marine transportation...

  5. Charting Transnational Native American Studies

    Directory of Open Access Journals (Sweden)

    Hsinya Huang

    2012-06-01

    Full Text Available Introduction to the Special Forum entitled "Charting Transnational Native American Studies: Aesthetics, Politics, Identity," edited by Hsinya Huang, Philip J. Deloria, Laura M. Furlan, and John Gamber

  6. Safe Minimum Internal Temperature Chart

    Science.gov (United States)

    ... JSR 286) Actions ${title} Loading... Safe Minimum Internal Temperature Chart Safe steps in food handling, cooking, and ... from other foods. Cook —Cook to the right temperature. Chill —Refrigerate food promptly. Cook all food to ...

  7. Leading Edge Aeronautics Research for NASA Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The LEARN Project explores the creation of novel concepts and processes with the potential to create new capabilities in aeronautics research through awards to the...

  8. 14 CFR 61.105 - Aeronautical knowledge.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical knowledge. 61.105 Section 61... Aeronautical knowledge. (a) General. A person who is applying for a private pilot certificate must receive and... knowledge areas of paragraph (b) of this section that apply to the aircraft category and class rating...

  9. Piezoelectric MEMS Microphones for Ground Testing of Aeronautical Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Improving the acoustical environment is critical in aeronautics. Airports and aeronautical systems manufacturers are facing ever-increasing demands to reduce noise...

  10. AMDIS and CHART update. 1

    International Nuclear Information System (INIS)

    A working group for updating atomic and molecular collision data in the NIFS database AMDIS (electron scattering) and CHART (ion scattering) has been organized. This group has searched and reviewed literatures for collecting relevant atomic data with are to be included into the database. This is a summary report of the activities of this working group. (author)

  11. AMDIS and CHART update. 1

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, I.; Kato, T. [National Inst. for Fusion Science, Toki, Gifu (Japan); Igarashi, A. [Miyazaki Univ., Miyazaki (JP)] [and others

    2002-10-01

    A working group for updating atomic and molecular collision data in the NIFS database AMDIS (electron scattering) and CHART (ion scattering) has been organized. This group has searched and reviewed literatures for collecting relevant atomic data with are to be included into the database. This is a summary report of the activities of this working group. (author)

  12. Quality Management System for Defence Aeronautical Industry

    OpenAIRE

    K.T. Thomas

    2006-01-01

    Indian defence aeronautical industry, while becoming a global business, demands a largeeffort to monitor quality management system (QMS) and to ensure quality of aeronauticalproducts. An effort is being made to look for an effective QMS for aeronautical industry in India,which will also meet the requirements of the regulatory authority.The essential features of an effective QMS are described and compared with the presentlyavailable QMS standards for defence aeronautical industry such as QCSR:...

  13. Aeronautical Engineering: A Continuing Bibliography. Supplement 421

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP#2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

  14. Mobile-ip Aeronautical Network Simulation Study

    Science.gov (United States)

    Ivancic, William D.; Tran, Diepchi T.

    2001-01-01

    NASA is interested in applying mobile Internet protocol (mobile-ip) technologies to its space and aeronautics programs. In particular, mobile-ip will play a major role in the Advanced Aeronautic Transportation Technology (AATT), the Weather Information Communication (WINCOMM), and the Small Aircraft Transportation System (SATS) aeronautics programs. This report presents the results of a simulation study of mobile-ip for an aeronautical network. The study was performed to determine the performance of the transmission control protocol (TCP) in a mobile-ip environment and to gain an understanding of how long delays, handoffs, and noisy channels affect mobile-ip performance.

  15. 76 FR 58843 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2011-09-22

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  16. 75 FR 17166 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2010-04-05

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  17. 78 FR 41114 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2013-07-09

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  18. 78 FR 69885 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2013-11-21

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  19. 76 FR 16643 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2011-03-24

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  20. 75 FR 41240 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2010-07-15

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  1. 75 FR 50782 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2010-08-17

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  2. 76 FR 183 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2011-01-03

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  3. 76 FR 40753 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2011-07-11

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  4. 78 FR 10640 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2013-02-14

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  5. 77 FR 38091 - NASA Advisory Council; Aeronautics Committee; Meeting.

    Science.gov (United States)

    2012-06-26

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting. AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  6. 77 FR 61432 - NASA Advisory Council; Aeronautics Committee; Meeting

    Science.gov (United States)

    2012-10-09

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Meeting AGENCY: National Aeronautics... Committee Act, Public Law 92-463, as amended, the National Aeronautics and Space Administration announces...

  7. Progress in the technology of nautical charting

    Digital Repository Service at National Institute of Oceanography (India)

    Joseph, A.

    surveying; chart projection schemes; the role of radio and satellite-based position-fixing systems; the technology of the modern electronic nautical charts; and applications of computers in modern navigation. The article also peeps into possible future...

  8. Air Emissions Sources, Charts and Maps

    Data.gov (United States)

    U.S. Environmental Protection Agency — Air Emissions provides (1) interactive charts supporting national, state, or county charts, (2) county maps of criteria air pollutant emissions for a state, and (3)...

  9. NOAA Seamless Raster Navigational Charts (RNC)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA Seamless Raster Chart Server provides a seamless collarless mosaic of the NOAA Raster Navigational Charts (RNC). The RNC are a collection of approximately...

  10. Are estimated control charts in control?

    NARCIS (Netherlands)

    Albers, W.; Kallenberg, W.C.M.

    2001-01-01

    Standard control chart practice assumes normality and uses estimated parameters. Because of the extreme quantiles involved, large relative errors result. Here simple corrections are derived to bring such estimated charts under control. As a criterion, suitable exceedance probabilities are used.

  11. 14 CFR 61.97 - Aeronautical knowledge.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical knowledge. 61.97 Section 61.97... knowledge. (a) General. A person who applies for a recreational pilot certificate must receive and log... knowledge areas of paragraph (b) of this section that apply to the aircraft category and class rating...

  12. Economic analysis of aeronautical research and technology

    Science.gov (United States)

    Gellman, A. J.

    1982-01-01

    The appropriateness of government intervention in the civilian market for aeronautics research and technology (R&T) is examined. The economic rationale for government intervention is examined. The conclusion is that the institutional role played by NASA in civilian aeronautics R&T markets is economically justified.

  13. Progress in the technology of nautical charting

    Digital Repository Service at National Institute of Oceanography (India)

    Joseph, A.

    the geographical information pertaining to the sea and the coastal water bodies was recorded on paper chart, on a miniature scale, for ready use by the mariners for marine navigational applications, and therefore the chart came to be known as "nautical chart...

  14. Continuity Adjustment for Control Charts for Attributes

    Institute of Scientific and Technical Information of China (English)

    L.K. Chan; T.K. Mak; B. Tao

    2003-01-01

    A unified approach is proposed for making a continuity adjustment on some control charts for attributes, e.g., np-chart and c-chart, through adding a uniform (0, 1) random observation to the conventional sample statistic (e.g., npi and ci). The adjusted sample statistic then has a continuous distribution. Consequently, given any Type I risk α (the probability that the sample statistic is on or beyond the control limits),control charts achieving the exact value of α can be readily constructed. Guidelines are given for when to use the continuity adjustment control chart, the conventional Shewhart control chart (with ±3 standard deviations control limits), and the control chart based on the exact distribution of the sample statistic before adjustment.

  15. Aeronautical Engineering: A Continuing Bibliography. Supplment 385

    Science.gov (United States)

    1998-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  16. Costs and Benefits of Advanced Aeronautical Technology

    Science.gov (United States)

    Bobick, J. C.; Denny, R. E.

    1983-01-01

    Programs available from COSMIC used to evaluate economic feasibility of applying advanced aeronautical technology to civil aircraft of future. Programs are composed of three major models: Fleet Accounting Module, Airframe manufacturer Module, and Air Carrier Module.

  17. Pearl A Probabilistic Chart Parser

    CERN Document Server

    Magerman, D M; Magerman, David M.; Marcus, Mitchell P.

    1994-01-01

    This paper describes a natural language parsing algorithm for unrestricted text which uses a probability-based scoring function to select the "best" parse of a sentence. The parser, Pearl, is a time-asynchronous bottom-up chart parser with Earley-type top-down prediction which pursues the highest-scoring theory in the chart, where the score of a theory represents the extent to which the context of the sentence predicts that interpretation. This parser differs from previous attempts at stochastic parsers in that it uses a richer form of conditional probabilities based on context to predict likelihood. Pearl also provides a framework for incorporating the results of previous work in part-of-speech assignment, unknown word models, and other probabilistic models of linguistic features into one parsing tool, interleaving these techniques instead of using the traditional pipeline architecture. In preliminary tests, Pearl has been successful at resolving part-of-speech and word (in speech processing) ambiguity, dete...

  18. Civilian Aeronautical Futures - The Responsibly Imaginable

    Science.gov (United States)

    Bushnell, Dennis M.

    2006-01-01

    Since 1940 Aeronautics has had an immense impact upon Global Human lifestyles and affairs - in both the Civilian and Military arenas. During this period Long distance Train and Ship passenger transport were largely supplanted by Air Travel and Aviation assumed a dominant role in warfare. The early 1940 s to the mid 1970 s was a particularly productive period in terms of Aeronautical Technology. What is interesting is that, since the mid 1970 s, the rate of Aeronautical Technological Progress has been far slower, the basic technology in nearly all of our current Aero Systems dates from the mid 70 s or earlier. This is especially true in terms of Configuration Aerodynamics, Aeronautics appears to have "settled" on the 707, double delta and rotary wing as the approach of choice for Subsonic long haul, supersonic cruise and VTOL respectively. Obviously there have been variants and some niche digression from this/these but in the main Aeronautics, particularly civilian Aeronautics, has become a self-professed "mature", Increasingly "Commodity", Industry. The Industry is far along an existing/deployed technology curve and focused, now for decades, on incremental/evolutionary change - largely Appliers vs. developers of technology. This is, of course, in sharp contrast to the situation in the early-to-later 20th century where Aeronautics was viewed as A Major Technological Engine, much the way IT/Bio/Nano/Energetics/Quantum Technologies are viewed today. A search for Visionary Aeronautical "Futures" papers/projections indicates a decided dearth thereof over the last 20 plus years compared to the previous quarter Century. Aeronautics is part of Aerospace and Aerospace [including Aeronautics] has seen major cutbacks over the last decades. Some numbers for the U.S. Aerospace Industry serve as examples. Order of 600,000 jobs lost, with some 180,000 more on the block over the next 10 years. Approximately 25% of the Aerospace workforce is eligible to retire and the average

  19. Electronic applications of the Smith chart

    CERN Document Server

    Smith, Phillip

    1995-01-01

    The legendary Smith chart inventor's classic reference book describes how the chart is used for designing lumped element and transmission line circuits. Provides tutorial material on transmission line theory and behavior, circuit representation on the chart, matching networks, network transformations and broadband matching. Includes a new chapter with examples designs and description of the winSMITH software accessory. Many computational instruments have succumbed to the power of the digital computer. This is not the case with the Smith Chart. A testament to Phil's genius is that his Smith Cha

  20. Quality Management System for Defence Aeronautical Industry

    Directory of Open Access Journals (Sweden)

    K.T. Thomas

    2006-01-01

    Full Text Available Indian defence aeronautical industry, while becoming a global business, demands a largeeffort to monitor quality management system (QMS and to ensure quality of aeronauticalproducts. An effort is being made to look for an effective QMS for aeronautical industry in India,which will also meet the requirements of the regulatory authority.The essential features of an effective QMS are described and compared with the presentlyavailable QMS standards for defence aeronautical industry such as QCSR: 2002 (DGAQA, India,Def Stan (MOD, UK, ISO, AQAPs (NATO and Society of Automotive Engineers (SAE aerospacestandards (AS. Evolution, relevance and review of the existing standards, to meet the requirementsof the industry as well as regulatory authority, have been made to bring out the special featuresand differences. The study leads to the most acceptable standard of SAE-AS-9100 (Rev B.With suitable modifications to include regulatory requirement of assistance for governmentquality assurance in the standard, when complied with, it will fully meet the QMS requirementsof the Indian defence aeronautical supply organisations as well as the requirements of theregulatory authority. Minor reorientation of the regulatory functions and inclusion of the QMSin the defence aeronautical supply orders are also suggested.

  1. Human Factors in Aeronautics at NASA

    Science.gov (United States)

    Mogford, Richard

    2016-01-01

    This is a briefing to a regularly meeting DoD group called the Human Systems Community of Interest: Mission Effectiveness. I was asked to address human factors in aeronautics at NASA. (Exploration (space) human factors has apparently already been covered.) The briefing describes human factors organizations at NASA Ames and Langley. It then summarizes some aeronautics tasks that involve the application of human factors in the development of specific tools and capabilities. The tasks covered include aircrew checklists, dispatch operations, Playbook, Dynamic Weather Routes, Traffic Aware Strategic Aircrew Requests, and Airplane State Awareness and Prediction Technologies. I mention that most of our aeronautics work involves human factors as embedded in development tasks rather than basic research.

  2. 49 CFR 236.718 - Chart, dog.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Chart, dog. 236.718 Section 236.718 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF... OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.718 Chart, dog....

  3. Color Charts, Esthetics, and Subjective Randomness

    Science.gov (United States)

    Sanderson, Yasmine B.

    2012-01-01

    Color charts, or grids of evenly spaced multicolored dots or squares, appear in the work of modern artists and designers. Often the artist/designer distributes the many colors in a way that could be described as "random," that is, without an obvious pattern. We conduct a statistical analysis of 125 "random-looking" art and design color charts and…

  4. The Conjugate Acid-Base Chart.

    Science.gov (United States)

    Treptow, Richard S.

    1986-01-01

    Discusses the difficulties that beginning chemistry students have in understanding acid-base chemistry. Describes the use of conjugate acid-base charts in helping students visualize the conjugate relationship. Addresses chart construction, metal ions, buffers and pH titrations, and the organic functional groups and nonaqueous solvents. (TW)

  5. Obtaining the Andersen's chart, triangulation algorithm

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    Andersen’s chart (Andersen & Berre, 1999) is a graphical method of observing cyclic soil response. It allows observing soil response to various stress amplitudes that can lead to liquefaction, excess plastic deformation or stabilizing soil response. The process of obtaining the original chart has...

  6. Body Mass Index (BMI) Charts (For Parents)

    Science.gov (United States)

    ... 5 Things to Know About Zika & Pregnancy Body Mass Index (BMI) Charts KidsHealth > For Parents > Body Mass Index (BMI) Charts Print A A A Text ... same age. Now they have another tool: body mass index (BMI). BMI is a calculation that uses ...

  7. 47 CFR 73.333 - Engineering charts.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2,...

  8. FusionCharts Beginner's Guide The Official Guide for FusionCharts Suite

    CERN Document Server

    Nadhani, Sanket; Bhattacharya, Shamasis

    2012-01-01

    The book is written as a practical, step-by-step guide to using FusionCharts Suite. The book not only teaches you the fundamentals and implementation of FusionCharts Suite, but also makes you the data visualization guru among your friends and colleagues by teaching how to select the right chart type and usability tips. Filled with examples, code samples and practical tips in a no-nonsense way, the book is a breeze to read.This book is both for beginners and advanced web developers who need to create interactive charts for their web applications. No previous knowledge of FusionCharts Suite is a

  9. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P.; Chantelot, S.; Moisson, N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  10. A video strip chart program

    International Nuclear Information System (INIS)

    A strip chart recorder has been utilized for trend analysis of the Oak Ridge National Laboratory EN tandem since 1987. At the EN, the author could not afford the nice eight channel thermal pen recorder that was used at the 25 URC. He had to suffice with two channel fiber tip or capillary pen type recorders retrieved from salvage and maintained with parts from other salvaged recorders. After cycling through several machines that eventually became completely unserviceable, a search for a new thermal recorder was begun. As much as he hates to write computer code, he decided to try his hand at getting an old data acquisition unit, that had been retrieved several years ago from salvage, to meet his needs. A BASIC language compiler was used because time was not available to learn a more advanced language. While attempting to increase acquisition and scroll speed on the 6 MHz 80286 that the code was first developed on, it became apparent that scrolling only the first small portion of the screen at high speed and then averaging that region and histogramming the average provided both the speed necessary for capturing fairly short duration events, and a trend record without use of back scrolling and disk storage routines. This turned out to be quite sufficient

  11. Ensuring US National Aeronautics Test Capabilities

    Science.gov (United States)

    Marshall, Timothy J.

    2010-01-01

    U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD). However, changes in the Aerospace landscape, primarily the decrease in demand for testing over the last 20 years required an overarching strategy for management of these national assets. Therefore, NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD. Test facility utilization is a critical factor for ATP because it relies on user occupancy fees to recover a substantial part of the operations costs for its facilities. Decreasing utilization is an indicator of excess capacity and in some cases low-risk redundancy (i.e., several facilities with basically the same capability and overall low utilization). However, low utilization does not necessarily translate to lack of strategic importance. Some facilities with relatively low utilization are nonetheless vitally important because of the unique nature of the capability and the foreseeable aeronautics testing needs. Unfortunately, since its inception, the customer base for ATP has continued to shrink. Utilization of ATP wind tunnels has declined by more than 50% from the FY 2006 levels. This significant decrease in customer usage is attributable to several factors, including the overall decline in new programs and projects in the aerospace sector; the impact of computational fluid dynamics (CFD) on the design, development, and research

  12. NASA's Role in Aeronautics: A Workshop. Volume I--Summary.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC. Assembly of Engineering.

    The central task of the workshop summarized in this report was to examine the relationship of the National Aeronautics and Space Administration's (NASA's) aeronautical research capabilities to the state of U.S. aviation and to make recommendations about NASA's future roles in aeronautics. Topics include NASA's role in: (1) aeronautics research and…

  13. Interactive Financial Charts- Agency Financial Reports

    Data.gov (United States)

    General Services Administration — For a visual depiction of GSA's Balance Sheet and Statement of Net Cost, please use the interactive charts to view the financial results for fiscal years 2007-2013.

  14. Practical guidance for charting ethics consultations.

    Science.gov (United States)

    Bruce, Courtenay R; Smith, Martin L; Tawose, Olubukunola Mary; Sharp, Richard R

    2014-03-01

    It is generally accepted that appropriate documentation of activities and recommendations of ethics consultants in patients' medical records is critical. Despite this acceptance, the bioethics literature is largely devoid of guidance on key elements of an ethics chart note, the degree of specificity that it should contain, and its stylistic tenor. We aim to provide guidance for a variety of persons engaged in clinical ethics consultation: new and seasoned ethics committee members who are new to ethics consultation, students and trainees in clinical ethics, and those who have significant experience with ethics consultation so that they can reflect on their practice. Toward the goal of promoting quality charting practices in ethics consultations, we propose recommendations on a broad array of questions concerning clinical ethics consultation chart notes, including whether and when to write a chart note, and practical considerations for the tenor, purpose, and content of a chart note. Our broader aim is to promote discussion about good charting practices in clinical ethics, with the hope of contributing to clear standards of excellence in clinical ethics consultation.

  15. Aeronautical progress in the United Kingdom

    Directory of Open Access Journals (Sweden)

    Dr. Cockburn

    1953-07-01

    Full Text Available The progress in aeronautics in the United Kingdom from 1903 to the present-day has been traced. The advance in design could be traced partly to the steady improvement in techniques such as strength of materials, structural methods, aerodynamics and engine design, and partly to definite technical discontinuities such as the introduction of the unbraced monoplane and later of the jet turbine. The key to this progress has been the large investment made in science and technical research and the healthy integration between industrial enterprise and government planning.

  16. Solar energy and the aeronautics industry. Thesis

    Science.gov (United States)

    Benedek, L.

    1985-01-01

    An introduction to the physical aspects of solar energy, incidental energy and variations in solar flux is presented, along with an explanation of the physical principles of obtaining solar energy. The history of the application of solar energy to aeronautics, including the Gossamer Penguin and the Solar Challenger is given. Finally, an analysis of the possibilities of using a reaction motor with hybrid propulsion combining solar energy with traditional fuels as well as calculations of the proposed cycle and its mode of operation are given.

  17. Chart of nuclides relating to neutron activation

    International Nuclear Information System (INIS)

    This chart is for frequent use in the prediction of the product species of neutron activation. The first edition of the chart has been made in 1976 after the repeated trial preparation. It has the following good points. (1) Any letter in chart is as large as one can read easily. [This condition has been obtained by the selection of items to be shown in chart. They are the name (the symbol of element, mass number, and half-life) of nuclide or of isomer, and the type of decay.]. (2) Decay product has been shown indirectly for branchings with two-step decay via short-lived daughter in an excited state. [This matter has been realized by use of the new mode of indication.] (3) Nuclides shown in chart are (a) naturally occurring nuclides and (b) nuclides formed from naturally occurring nuclides through one of the following reactions: (n, γ), (n, n'), (n, p), (n, α), (n, 2n), (n, pn), (n, 3n), (n, αn), (n, t), (n, 3He), (n, 2p), and (n, γ)(n, γ). In the revision of the first edition, some modes of indication have become a little simpler, and the isomers of shorter half-lives (0.1 - 1 μs) have been added. (author)

  18. A PIP chart for nuclear plant safety

    International Nuclear Information System (INIS)

    While it is known that social and political aspects of nuclear safety issues are important, little study has been done on identifying the breadth of stakeholders whose policies have important influences over nuclear plant safety in a comprehensive way. The objectives of this study are to develop a chart that visually identifies important stakeholders and their policies and illustrates these influences in a hierarchical representation so that the relationship between stakeholders and nuclear safety will be better understood. This study is based on a series of extensive interviews with major stakeholders, such as nuclear plant managers, corporate planning vice presidents, state regulators, news media, and public interest groups, and focuses on one US nuclear power plant. Based on the interview results, the authors developed a conceptual policy influence paths (PIP) chart. The PIP chart illustrates the hierarchy of influence among stakeholders. The PIP chart is also useful in identifying possible stakeholders who can be easily overlooked without the PIP chart. In addition, it shows that influence flow is circular rather than linear in one direction

  19. Italian cardiovascular mortality charts of the CUORE project: are they comparable with the SCORE charts?

    LENUS (Irish Health Repository)

    Donfrancesco, Chiara

    2010-08-01

    The aim of this study was to build risk charts for the assessment of cardiovascular mortality of the CUORE project, an Italian longitudinal study, and to compare them with the systematic coronary risk evaluation (SCORE) project charts for low risk European countries.

  20. TEXTILE STRUCTURES FOR AERONAUTICS (PART II

    Directory of Open Access Journals (Sweden)

    SOLER Miquel

    2014-05-01

    Full Text Available Three-dimensional (3D textile structures with better delamination resistance and damage impact tolerance to be applied in composites for structural components is one of the main goals of the aeronautical industry. Textile Research Centre in Canet de Mar has been working since 2008 in this field. Our staff has been designing, developing and producing different textile structures using different production methods and machinery to improve three-dimensional textile structures as fiber reinforcement for composites. This paper describes different tests done in our textile labs from unidirectional structures to woven, knitted or braided 3 D textile structures. Advantages and disadvantages of each textile structure are summarized. The second part of this paper deals with our know-how in the manufacturing and assessing of three-dimensional textile structures during this last five years in the field of textile structures for composites but also in the development of structures for other applications. In the field of composites for aeronautic sector we have developed textile structures using the main methods of textile production, that is to say, weaving, warp knitting, weft knitting and braiding. Comparing the advantages and disadvantages it could be said that braided fabrics, with a structure in the three space axes are the most suitable for fittings and frames.

  1. IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Stojce Ilcev

    2011-03-01

    Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

  2. 14 CFR 61.159 - Aeronautical experience: Airplane category rating.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aeronautical experience: Airplane category... Transport Pilots § 61.159 Aeronautical experience: Airplane category rating. (a) Except as provided in... certificate with an airplane category and class rating must have at least 1,500 hours of total time as a...

  3. NASA's Role in Aeronautics: A Workshop. Volume IV - General Aviation.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC. Assembly of Engineering.

    The central task of a 1980 workshop on the role of the National Aeronautics and Space Administration (NASA) in aeronautics was to examine the relationship of NASA's research capabilities to the state of U.S. aviation and to make recommendations about NASA's future role in aeronautics. The findings and recommendations of the Panel on General…

  4. NASA's Role in Aeronautics: A Workshop. Volume II - Military Aviation.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC. Assembly of Engineering.

    The central task of a 1980 workshop on the role of the National Aeronautics and Space Administration (NASA) in aeronautics was to examine the relationship of NASA's research capabilities to the state of U.S. aviation and to make recommendations about NASA's future role in aeronautics. The findings and recommendations of the Panel on Military…

  5. Transactions of Nanjing University of Aeronautics & Astronautics

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Transactions of Nanjing University of Aeronautics & Astronautics (TNUAA, in English) is a comprehensive academic publication which deals mainly with the research achievements in aeronautics, civil aviation, astronautics and their theoretical basis. It is published by Nanjing University of Aeronautics & Astronautics, and has started its publication since Oct. 1982.

  6. Exploring patterns in European singles charts

    CERN Document Server

    Buda, Andrzej

    2015-01-01

    European singles charts are important part of the music industry responsible for creating popularity of songs. After modeling and exploring dynamics of global album sales in previous papers, we investigate patterns of hit singles popularity according to all data (1966-2015) from weekly charts (polls) in 12 Western European countries. The dynamics of building popularity in various national charts is more than the economy because it depends on spread of information. In our research we have shown how countries may be affected by their neighbourhood and influenced by technological era. We have also computed correlations with geographical and cultural distances between countries in analog, digital and Internet era. We have shown that time delay between the single premiere and the peak of popularity has become shorter under the influence of technology and the popularity of songs depends on geographical distances in analog (1966-1987) and Internet (2004-2015) era. On the other hand, cultural distances between nation...

  7. Application of Mobile-ip to Space and Aeronautical Networks

    Science.gov (United States)

    Leung, Kent; Shell, Dan; Ivancic, William D.; Stewart, David H.; Bell, Terry L.; Kachmar, Brian A.

    2001-01-01

    The National Aeronautics and Space Administration (NASA) is interested in applying mobile Internet protocol (mobile-ip) technologies to its space and aeronautics programs. In particular, mobile-ip will play a major role in the Advanced Aeronautic Transportation Technology (AAT-F), the Weather Information Communication (WINCOMM), and the Small Aircraft Transportation System (SATS) aeronautics programs. This paper describes mobile-ip and mobile routers--in particular, the features, capabilities, and initial performance of the mobile router are presented. The application of mobile-router technology to NASA's space and aeronautics programs is also discussed.

  8. A fuel level sensor for aeronautical applications

    Science.gov (United States)

    Petrazzuoli, L.; Persichetti, G.; Onorato, G.; Grimaldi, I. A.; Testa, G.; Bernini, R.

    2015-03-01

    A novel fuel level sensor for aeronautical applications is developed. The sensor is based on an array of total internal reflection (TIR) point sensors. Respect to conventional TIR sensors the new design permits to be sensitive to common jet fuels (JetA, JP4,JP7) but also to operate with new alternative fuels. The sensor doesn't require aircraft calibration, temperature compensation and furthermore is able to operate correctly when partially or totally exposed to presence of condensed water on its surface. The point sensors are multiplexed on a single fiber by optical couplers and interrogated simultaneously by Optical Time Domain Reflectometry (OTDR) at a wavelength of 1550nm. Experimental results show a resolution of +/-1.5mm could be achieved. The sensors is also able to measure the free water level in the fuel.

  9. POWER AND INFLUENCE CHARTING: THE GOOGLE WAY

    Energy Technology Data Exchange (ETDEWEB)

    Troy Hiltbrand; Sharon Berrett

    2011-07-01

    The success or failure of a project may be charted in the initiation phase. Therefore, initiation is arguably the most important phase of any project. During the initiation phase, the foundation for the project is established, including the selection of project sponsors and champions and getting their buy-in, which sets the project up for success.

  10. Chart Notes from a Sports Nutritionist.

    Science.gov (United States)

    Clark, Nancy

    1986-01-01

    A sports nutritionist/registered dietician on the sports medicine team can provide clients with reliable nutrition information and respond to their interest in healthful, high-energy eating. Three case reports illustrate the usefulness of a nutritionist to practitioners of sports medicine. A chart of healthful foods is provided. (MT)

  11. Electronic Chart Display and Information System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper introduces the most advanced form of electronic chart display and information systems (ECDIS) which complies with the Performance Standards for ECDIS established by the International Maritime Organization (IMO) and the International Hydrographic Organization (IHO).It also describes the key features and the important functions of ECDIS.Then the future development of ECDIS in marine is discussed.

  12. Mobile Phone Mood Charting for Adolescents

    Science.gov (United States)

    Matthews, Mark; Doherty, Gavin; Sharry, John; Fitzpatrick, Carol

    2008-01-01

    Mobile phones may provide a useful and engaging platform for supporting therapeutic services working with adolescents. This paper examines the potential benefits of the mobile phone for self-charting moods in comparison to existing methods in current practice. The paper describes a mobile phone application designed by the authors which allows…

  13. A robust standard deviation control chart

    NARCIS (Netherlands)

    M. Schoonhoven; R.J.M.M. Does

    2012-01-01

    This article studies the robustness of Phase I estimators for the standard deviation control chart. A Phase I estimator should be efficient in the absence of contaminations and resistant to disturbances. Most of the robust estimators proposed in the literature are robust against either diffuse distu

  14. Charting environmental pollution. [by noise measurements

    Science.gov (United States)

    Halpert, E.; Bizo, F.; Karacsonyi, Z.

    1974-01-01

    It is found that areas affected by different noxious agents are within the limits traced for high noise level areas; consequently, it is suggested that high noise pressure levels should be used as the primary indication of environmental pollution. A complex methodology is reported for charting environmental pollution due to physical, chemical and biological noxious agents on the scale of an industrial district.

  15. The revolutionary impact of evolving aeronautical technologies

    Science.gov (United States)

    Kayten, G. G.; Driver, C.; Maglieri, D. J.

    1984-01-01

    Recent advances in aeronautical technologies which could produce revolutionary changes in transport aircraft if fully implemented are delineated. Laminar flow control offers a L/D improvement from the current 18 to 22 if used with a 767 configuration. Higher aspect and thickness/chord ratios could yield more efficient structural designs and further drag reduction. High-strength, fiber-reinforced composite structures can reduce structural weight by 10-30 percent. Improved engine cooling methods, higher stage loadings and exhaust temperatures can lower the SFC by 15 percent, engine weight by 15 percent, and the parts count by 50 percent. Aft-mounted counterrotating propellers can potentially decrease the SFC an additional 15-20 percent. Supersonic transport aircraft with L/D ratios of 18 and 70 seat miles/gal fuel efficiency can now be built that weigh half as much as the Concorde and carry the same load. The new SST would have superplastic-molded Al alloy structures.

  16. TEXTILE STRUCTURES FOR AERONAUTICS (PART I

    Directory of Open Access Journals (Sweden)

    SOLER Miquel

    2014-05-01

    Full Text Available Three-dimensional (3D textile structures with better delamination resistance and damage impact tolerance to be applied in composites for structural components is one of the main goals of the aeronautical industry. Textile Research Centre in Canet de Mar has been working since 2008 in this field. Our staff has been designing, developing and producing different textile structures using different production methods and machinery to improve three-dimensional textile structures as fiber reinforcement for composites. This paper describes different tests done in our textile labs from unidirectional structures to woven, knitted or braided 3 D textile structures. Advantages and disadvantages of each textile structure are summarized. The first part of this paper deals with the introduction of our Textile Research Centre in the field of composites and carbon fiber as a main material to produce three – dimensional textile structures. The use of composite materials in aerospace structures has increased over the past decades. Our contribution related to this field consists of the development of three- dimensional textile structures and even the adaptation and improvement of machinery to do it possible. Carbon fiber provides advantages as volumetric fraction and minimum fault occurrence. However carbon fiber has also disadvantages as uncomfortable handling delamination and high cost of material and processing.

  17. Arctic Sea Ice Charts from Danish Meteorological Institute, 1893 - 1956

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — From 1893 to 1956, the Danish Meteorological Institute (DMI) created charts of observed and inferred sea ice extent for each summer month. These charts are based on...

  18. A Chart Display and Reporting App for Windows

    Science.gov (United States)

    Poxon, M.

    2016-06-01

    (Abstract only) Details are presented for a windows application which allows simultaneous display of AAVSO charts and report-formatting software in the hope that other members will offer suggestions from their own experiences with charts and reporting.

  19. Charting Secrets Stop Reading Start Practicing

    CERN Document Server

    Bedford, Louise

    2012-01-01

    It is a common myth that the sharemarket is a fast ticket to the easy life. Buy a few shares and watch them go up. Call your broker for up-to-the-minute price information as you drive the Porsche to the golf club. Yell 'Sell! Sell! Sell' into your mobile as you ski through the Swiss Alps. Nothing could be further from the truth. Louise Bedford believes that the only way to be successful in the market is to spend time studying and putting in the hard work, just like any other job. With this in mind, she has written Charting Secrets. Not just another trading book, Charting Secrets is a workbook

  20. JDATAVIEWER – JAVA-Based Charting Library

    CERN Document Server

    Kruk, G

    2009-01-01

    The JDataViewer is a Java-based charting library developed at CERN, with powerful, extensible and easy to use function editing capabilities. Function edition is heavily used in Control System applications, but poorly supported in products available on the market. The JDataViewer enables adding, removing and modifying function points graphically (using a mouse) or by editing a table of values. Custom edition strategies are supported: developer can specify an algorithm that reacts to the modification of a given point in the function by automatically adapting all other points. The library provides all typical 2D plotting types (scatter, polyline, area, bar, HiLo, contour), as well as data point annotations and data indicators. It also supports common interactors to zoom and move the visible view, or to select and highlight function segments. A clear API is provided to configure and customize all chart elements (colors, fonts, data ranges ...) programmatically, and to integrate non-standard rendering types, inter...

  1. A new Snellen's visual acuity chart with 'Indian' numerals.

    OpenAIRE

    Al-Salem, M

    1987-01-01

    'Indian' numerals, which are popular among the Arab population, were used to devise a new Snellen's visual acuity chart. The new chart has the advantages of a reading chart. It keeps the patient's interest, does not miss alexic patients, and is quicker to perform. It is also devoid of the many disadvantages of a kinetic response chart (the capital E letter or Landolt's broken rings), especially that of the limited option of test objects.

  2. Classification of Aeronautics System Health and Safety Documents

    Data.gov (United States)

    National Aeronautics and Space Administration — Most complex aerospace systems have many text reports on safety, maintenance, and associated issues. The Aviation Safety Reporting System (ASRS) spans several...

  3. Intelligent bar chart plagiarism detection in documents.

    Science.gov (United States)

    Al-Dabbagh, Mohammed Mumtaz; Salim, Naomie; Rehman, Amjad; Alkawaz, Mohammed Hazim; Saba, Tanzila; Al-Rodhaan, Mznah; Al-Dhelaan, Abdullah

    2014-01-01

    This paper presents a novel features mining approach from documents that could not be mined via optical character recognition (OCR). By identifying the intimate relationship between the text and graphical components, the proposed technique pulls out the Start, End, and Exact values for each bar. Furthermore, the word 2-gram and Euclidean distance methods are used to accurately detect and determine plagiarism in bar charts.

  4. Slide rule-type color chart predicts reproduced photo tones

    Science.gov (United States)

    Griffin, J. D.

    1966-01-01

    Slide rule-type color chart determines the final reproduced gray tones in the production of briefing charts that are photographed in black and white. The chart shows both the color by drafting paint manufacturers name and mixture number, and the gray tone resulting from black and white photographic reproduction.

  5. Aeronautical Engineering: A Continuing Bibliography with Indexes. SUPPL-422

    Science.gov (United States)

    2000-01-01

    This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

  6. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 392

    Science.gov (United States)

    1999-01-01

    This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

  7. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 405

    Science.gov (United States)

    1999-01-01

    This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

  8. Sectoral Innovation Watch Space and Aeronautics Sectors. Final sector report

    NARCIS (Netherlands)

    Giessen, A.M. van der

    2011-01-01

    The space and aeronautics sectors are high-technology sectors and belong to the most innovative sectors in Europe1. Analysis of CIS4 data shows that the space and aeronautics sectors continue to be very innovative. 85% of the firms is engaged in intramural R&D. Total R&D expenditures are between 21%

  9. The Hill Chart Calculation for Pelton Runner Models using the HydroHillChart - Pelton Module Software

    Directory of Open Access Journals (Sweden)

    Adelina Bostan

    2015-07-01

    Full Text Available The Pelton turbines industrial design is based on the hill chart characteristics obtained by measuring the models. Primary data measurements used to obtain the hill chart can be processed graphically, by hand or by using graphic programs respectively CAD programs; the HydroHillChart - Pelton module software is a specialized tool in achieving the hill chart, using interpolation cubic spline functions. Thereby, based on measurements of several models of Pelton turbines, a computerized library, used to design industrial Pelton turbines can be created. The paper presents the universal characteristics calculated by using the HydroHillChart - Pelton module software for a series of Pelton runners.

  10. Reliability assessment of tunneling flow charts

    International Nuclear Information System (INIS)

    When driving horizontal workings of different kinds it is typical to reserve excessive redundant equipment. However, the lack of resources (facilities, people) and poor management don't ensure goal achievement [3]. The paper presents reliability assessment method of tunneling with the help of mathematical modeling. The mathematical model is developed on the basis of factual data of tunneling conditions and no-failure operation probabilities of the flow chart elements are estimated. The method of reliability assessment allows identifying organizational, technological and technical elements of the reserves to increases drive efficiency and improve feasibility characteristics

  11. Reliability assessment of tunneling flow charts

    Science.gov (United States)

    Antropova, N. A.; Krets, V. G.; Luk'yanov, V. G.; Baranova, A. V.

    2015-02-01

    When driving horizontal workings of different kinds it is typical to reserve excessive redundant equipment. However, the lack of resources (facilities, people) and poor management don't ensure goal achievement [3]. The paper presents reliability assessment method of tunneling with the help of mathematical modeling. The mathematical model is developed on the basis of factual data of tunneling conditions and no-failure operation probabilities of the flow chart elements are estimated. The method of reliability assessment allows identifying organizational, technological and technical elements of the reserves to increases drive efficiency and improve feasibility characteristics.

  12. A Hybrid Satellite-Terrestrial Approach to Aeronautical Communication Networks

    Science.gov (United States)

    Kerczewski, Robert J.; Chomos, Gerald J.; Griner, James H.; Mainger, Steven W.; Martzaklis, Konstantinos S.; Kachmar, Brian A.

    2000-01-01

    Rapid growth in air travel has been projected to continue for the foreseeable future. To maintain a safe and efficient national and global aviation system, significant advances in communications systems supporting aviation are required. Satellites will increasingly play a critical role in the aeronautical communications network. At the same time, current ground-based communications links, primarily very high frequency (VHF), will continue to be employed due to cost advantages and legacy issues. Hence a hybrid satellite-terrestrial network, or group of networks, will emerge. The increased complexity of future aeronautical communications networks dictates that system-level modeling be employed to obtain an optimal system fulfilling a majority of user needs. The NASA Glenn Research Center is investigating the current and potential future state of aeronautical communications, and is developing a simulation and modeling program to research future communications architectures for national and global aeronautical needs. This paper describes the primary requirements, the current infrastructure, and emerging trends of aeronautical communications, including a growing role for satellite communications. The need for a hybrid communications system architecture approach including both satellite and ground-based communications links is explained. Future aeronautical communication network topologies and key issues in simulation and modeling of future aeronautical communications systems are described.

  13. A paediatric X-ray exposure chart

    International Nuclear Information System (INIS)

    The aim of this review was to develop a radiographic optimisation strategy to make use of digital radiography (DR) and needle phosphor computerised radiography (CR) detectors, in order to lower radiation dose and improve image quality for paediatrics. This review was based on evidence-based practice, of which a component was a review of the relevant literature. The resulting exposure chart was developed with two distinct groups of exposure optimisation strategies – body exposures (for head, trunk, humerus, femur) and distal extremity exposures (elbow to finger, knee to toe). Exposure variables manipulated included kilovoltage peak (kVp), target detector exposure and milli-ampere-seconds (mAs), automatic exposure control (AEC), additional beam filtration, and use of antiscatter grid. Mean dose area product (DAP) reductions of up to 83% for anterior–posterior (AP)/posterior–anterior (PA) abdomen projections were recorded postoptimisation due to manipulation of multiple-exposure variables. For body exposures, the target EI and detector exposure, and thus the required mAs were typically 20% less postoptimisation. Image quality for some distal extremity exposures was improved by lowering kVp and increasing mAs around constant entrance skin dose. It is recommended that purchasing digital X-ray equipment with high detective quantum efficiency detectors, and then optimising the exposure chart for use with these detectors is of high importance for sites performing paediatric imaging. Multiple-exposure variables may need to be manipulated to achieve optimal outcomes

  14. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 420

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  15. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 419

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  16. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 398

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes - subject and author are included after the abstract section.

  17. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 396

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  18. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 404

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  19. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 418

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  20. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 391

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  1. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 413

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  2. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 406

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

  3. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 389

    Science.gov (United States)

    1998-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  4. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 387

    Science.gov (United States)

    1998-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  5. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 386

    Science.gov (United States)

    1998-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  6. An Overview of the NASA Aeronautics Test Program Strategic Plan

    Science.gov (United States)

    Marshall, Timothy J.

    2010-01-01

    U.S. leadership in aeronautics depends on ready access to technologically advanced, efficient, and affordable aeronautics test capabilities. These systems include major wind tunnels and propulsion test facilities and flight test capabilities. The federal government owns the majority of the major aeronautics test capabilities in the United States, primarily through the National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD), however an overarching strategy for management of these national assets was needed. Therefore, in Fiscal Year (FY) 2006 NASA established the Aeronautics Test Program (ATP) as a two-pronged strategic initiative to: (1) retain and invest in NASA aeronautics test capabilities considered strategically important to the agency and the nation, and (2) establish a strong, high level partnership with the DoD Test Resources Management Center (TRMC), stewards of the DoD test and evaluation infrastructure. Since then, approximately seventy percent of the ATP budget has been directed to underpin fixed and variable costs of facility operations within its portfolio and the balance towards strategic investments in its test facilities, including maintenance and capability upgrades. Also, a strong guiding coalition was established through the National Partnership for Aeronautics Testing (NPAT), with governance by the senior leadership of NASA s Aeronautics Research Mission Directorate (ARMD) and the DoD's TRMC. As part of its strategic planning, ATP has performed or participated in many studies and analyses, including assessments of major NASA and DoD aeronautics test capabilities, test facility condition evaluations and market research. The ATP strategy has also benefitted from unpublished RAND research and analysis by Ant n et al. (2009). Together, these various studies, reports and assessments serve as a foundation for a new, five year strategic plan that will guide ATP through FY 2014. Our vision for the future is a balanced

  7. Fundamentals of Aerospace Engineering: An introductory course to aeronautical engineering

    OpenAIRE

    Soler, Manuel

    2014-01-01

    Fundamentals of Aerospace Engineering is a text book that provides an introductory, thorough overview of aeronautical engineering, and it is aimed at serving as reference for an undergraduate course on aerospace engineering.

  8. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 397

    Science.gov (United States)

    1999-01-01

    This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  9. NASA Ames and Future of Space Exploration, Science, and Aeronautics

    Science.gov (United States)

    Cohen, Jacob

    2015-01-01

    Pushing the frontiers of aeronautics and space exploration presents multiple challenges. NASA Ames Research Center is at the forefront of tackling these issues, conducting cutting edge research in the fields of air traffic management, entry systems, advanced information technology, intelligent human and robotic systems, astrobiology, aeronautics, space, earth and life sciences and small satellites. Knowledge gained from this research helps ensure the success of NASA's missions, leading us closer to a world that was only imagined as science fiction just decades ago.

  10. THE CHART ROMANIA-NATO-UE

    Directory of Open Access Journals (Sweden)

    Duduială Popescu Lorena

    2009-05-01

    Full Text Available viewed in the context of geopolitical and geostrategic current and through the elements of distinction in terms of identity and cultural institutions, chart Romania - NATO / Israel - EU stands under the sign of the common interest channel, firstly, on common values and hence the collective interests of the partners involved in the two organizational structures. Noteworthy in this context is the extent of bilateral involvement of Romania in the bodies and the politico-military, represented by NATO (the North Atlantic Treaty Organization, which is primarily military values and the construction superstate permanent expansion and development - European Union , both generating as much for our country as obligations of a politico-military security, and economic, social, institutional, cultural.

  11. CONTROL CHARTS FOR STATIONARY VECTOR ARMA PROCESSES

    Directory of Open Access Journals (Sweden)

    J. Yadavalli

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: In practice, there are many quality control situations where a product under consideration may have two or more interrelated quality characteristics and observations of each characteristic are serially correlated. One of the objectives of management is to investigate whether or not all these characteristics of the product simultaneously satisfy the required specifications. To the author's best knowledge, no concrete attempts have been made so far to construct the control charts for such situations, particularly when the data arise from vector autoregressive-moving average (VARMA processes. It is this problem that has been addressed in this paper. A few methods are suggested for constructing the control charts. When assumptions about independence and normality break down, a bootstrap method, perhaps for the first time, is suggested to attack the problem. Some illustrative examples are discussed.

    AFRIKAANSE OPSOMMING: In die praktyk is daar vele kwaliteitbeheersituasies waar 'n betrokke produk een of twee onderling verbonde kenmerke kan hê en waarnemings van elke kenmerk serie gekorreleer is. Een van die doelwitte van bestuur is om te ondersoek of hierdie kenmerke van die produk gelyktydig aan die vereiste spesifikasies voldoen al dan nie. Na die outeur se beste wete, is daar tot dusver geen daadwerklike pogings aangewend om die beheergrafieke vir sodanige situasies op te stel nie, veral waar die data ontstaan uit vektor outoregressief bewegende gemiddelde (VARMA prosesse. Hierdie probleem geniet in hierdie artikel aandag. 'n Aantal metodes vir die opstel van die beheergrafieke word voorgestel. Wanneer aannames oor selfstandigheid en normaliteit faal, word 'n skoenlusmetode voorgestel om die probleem die hoof te bied. 'n Aantal voorbeelde ter toeligting word bespreek.

  12. Live sequence charts to model medical information

    Directory of Open Access Journals (Sweden)

    Aslakson Eric

    2012-06-01

    Full Text Available Abstract Background Medical records accumulate data concerning patient health and the natural history of disease progression. However, methods to mine information systematically in a form other than an electronic health record are not yet available. The purpose of this study was to develop an object modeling technique as a first step towards a formal database of medical records. Method Live Sequence Charts (LSC were used to formalize the narrative text obtained during a patient interview. LSCs utilize a visual scenario-based programming language to build object models. LSC extends the classical language of UML message sequence charts (MSC, predominantly through addition of modalities and providing executable semantics. Inter-object scenarios were defined to specify natural history event interactions and different scenarios in the narrative text. Result A simulated medical record was specified into LSC formalism by translating the text into an object model that comprised a set of entities and events. The entities described the participating components (i.e., doctor, patient and record and the events described the interactions between elements. A conceptual model is presented to illustrate the approach. An object model was generated from data extracted from an actual new patient interview, where the individual was eventually diagnosed as suffering from Chronic Fatigue Syndrome (CFS. This yielded a preliminary formal designated vocabulary for CFS development that provided a basis for future formalism of these records. Conclusions Translation of medical records into object models created the basis for a formal database of the patient narrative that temporally depicts the events preceding disease, the diagnosis and treatment approach. The LSCs object model of the medical narrative provided an intuitive, visual representation of the natural history of the patient’s disease.

  13. HydroHillChart – Francis module. Software used to Calculate the Hill Chart of the Francis Hydraulic Turbines

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-07-01

    Full Text Available The paper presents the Hydro Hill Chart - Francis module application, used to calculate the hill chart of the Pelton, Francis and Kaplan hydraulic turbine models, by processing the data measured on the stand. After describing the interface and menu, the input data is graphically presented and the universal characteristic for measuring scenarios ao=const. and n11=const is calculated. Finally, the two calculated hill charts are compared through a graphical superimposition of the isolines.

  14. HydroHillChart – Francis module. Software used to Calculate the Hill Chart of the Francis Hydraulic Turbines

    OpenAIRE

    Dorian Nedelcu; Adelina Bostan; Florin Peris-Bendu

    2015-01-01

    The paper presents the Hydro Hill Chart - Francis module application, used to calculate the hill chart of the Pelton, Francis and Kaplan hydraulic turbine models, by processing the data measured on the stand. After describing the interface and menu, the input data is graphically presented and the universal characteristic for measuring scenarios ao=const. and n11=const is calculated. Finally, the two calculated hill charts are compared through a graphical superimposition of t...

  15. Quality Control Charts in Large-Scale Assessment Programs

    Science.gov (United States)

    Schafer, William D.; Coverdale, Bradley J.; Luxenberg, Harlan; Jin, Ying

    2011-01-01

    There are relatively few examples of quantitative approaches to quality control in educational assessment and accountability contexts. Among the several techniques that are used in other fields, Shewart charts have been found in a few instances to be applicable in educational settings. This paper describes Shewart charts and gives examples of how…

  16. US Nuclear Regulatory Commission organization charts and functional statements

    International Nuclear Information System (INIS)

    This document is the US NRC organizational structure and chart as of July 1, 1996. It contains the org charts for the Commission, ACRS, ASLAB, Commission staff offices, Executive Director for Operations, Office of the Inspector General, Program offices, and regional offices

  17. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This document is the US NRC organizational structure and chart as of July 1, 1996. It contains the org charts for the Commission, ACRS, ASLAB, Commission staff offices, Executive Director for Operations, Office of the Inspector General, Program offices, and regional offices.

  18. Model based control charts in stage 1 quality control

    OpenAIRE

    Koning, Alex

    1999-01-01

    textabstractIn this paper a general method of constructing control charts for preliminary analysis of individual observations is presented, which is based on recursive score residuals. A simulation study shows that certain implementations of these charts are highly effective in detecting assignable causes.

  19. 46 CFR Figure 1 to Part 150 - Compatibility Chart

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Compatibility Chart 1 Figure 1 to Part 150 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES COMPATIBILITY OF CARGOES Pt. 150, Fig. 1 Figure 1 to Part 150—Compatibility Chart EC02FE91.079...

  20. Chart it once: innovation in public health documentation.

    Science.gov (United States)

    Zerwekh, J; Thibodeaux, R; Plesko, R

    2000-01-01

    The Seattle-King County Department of Public Health implemented a revision in the charting for its Family Support programs with the goal of streamlining the entire charting process, reducing redundancy, improving quality, and improving productivity. This article applies diffusion of innovations theory to the process of changing documentation.

  1. 47 CFR 73.699 - TV engineering charts.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following...

  2. Predictable Charts: An Effective Strategy to Engage and Impact Learners

    Science.gov (United States)

    McClure, Erin

    2016-01-01

    This article explores how to integrate reading, writing, speaking, and listening instruction by engaging students in Predictable Charts. Discover how Predictable Charts can support students with reading, writing, speaking, and listening in Kindergarten, First Grade, or Special Education classrooms. Through this article, learn the steps to…

  3. Control charts for location based on different sampling schemes

    NARCIS (Netherlands)

    R. Mehmood; M. Riaz; R.J.M.M. Does

    2013-01-01

    Control charts are the most important statistical process control tool for monitoring variations in a process. A number of articles are available in the literature for the X̄ control chart based on simple random sampling, ranked set sampling, median-ranked set sampling (MRSS), extreme-ranked set sam

  4. 76 FR 75565 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems (UAS) Subcommittee Meeting

    Science.gov (United States)

    2011-12-02

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems (UAS) Subcommittee Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Meeting....

  5. 78 FR 38076 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Science.gov (United States)

    2013-06-25

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Meeting....

  6. 77 FR 59020 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Science.gov (United States)

    2012-09-25

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  7. 78 FR 7816 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee Meeting

    Science.gov (United States)

    2013-02-04

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  8. 77 FR 32699 - NASA Advisory Council; Aeronautics Committee; UAS Subcommittee Meeting

    Science.gov (United States)

    2012-06-01

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; UAS Subcommittee Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting. SUMMARY: In accordance with...

  9. 78 FR 25100 - NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting

    Science.gov (United States)

    2013-04-29

    ... From the Federal Register Online via the Government Publishing Office NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA Advisory Council; Aeronautics Committee; Unmanned Aircraft Systems Subcommittee; Meeting AGENCY: National Aeronautics and Space Administration. ACTION: Notice of meeting....

  10. Synthetic-type control charts for time-between-events monitoring.

    Directory of Open Access Journals (Sweden)

    Fang Yen Yen

    Full Text Available This paper proposes three synthetic-type control charts to monitor the mean time-between-events of a homogenous Poisson process. The first proposed chart combines an Erlang (cumulative time between events, Tr chart and a conforming run length (CRL chart, denoted as Synth-Tr chart. The second proposed chart combines an exponential (or T chart and a group conforming run length (GCRL chart, denoted as GR-T chart. The third proposed chart combines an Erlang chart and a GCRL chart, denoted as GR-Tr chart. By using a Markov chain approach, the zero- and steady-state average number of observations to signal (ANOS of the proposed charts are obtained, in order to evaluate the performance of the three charts. The optimal design of the proposed charts is shown in this paper. The proposed charts are superior to the existing T chart, Tr chart, and Synth-T chart. As compared to the EWMA-T chart, the GR-T chart performs better in detecting large shifts, in terms of the zero- and steady-state performances. The zero-state Synth-T4 and GR-Tr (r = 3 or 4 charts outperform the EWMA-T chart for all shifts, whereas the Synth-Tr (r = 2 or 3 and GR-T 2 charts perform better for moderate to large shifts. For the steady-state process, the Synth-Tr and GR-Tr charts are more efficient than the EWMA-T chart in detecting small to moderate shifts.

  11. HydroHillChart – Pelton module. Software used to Calculate the Hill Chart of the Pelton Hydraulic Turbines

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-07-01

    Full Text Available The paper presents the HydroHillChart - Pelton module application, used to calculate the hill chart of the Pelton hydraulic turbine models, by processing the data measured on the stand. In addition, the tools offered by the application such as: interface, menu, input data, numerical and graphical results, etc. are described.

  12. Charting a Course for the Infrasound Renaissance

    Science.gov (United States)

    Garces, M.; Bass, H.; Hedlin, M.; Hayward, C.; Bowman, R.; Brown, D.; Businger, S.; Butler, R.; Chouet, B.; Drob, D.; Hetzer, C.; Koyanagi, S.; Mattioli, G.; McCormack, D.; Merrifield, M.; Pack, D.; Swanson, D.; Veith, K.; Voight, B.; Willis, M.

    2003-12-01

    The turn of the 21st century marks the onset of a renaissance in the field of infrasound, which had been dormant for ~30 years. The ongoing deployment of a global infrasound network has reawakened the field to a world of high-resolution digital array data, rapid communication, and seemingly unlimited growth in computing power. Complex phenomena that could only be addressed in general terms three decades ago can now be measured, analyzed, and modeled with unprecedented fidelity. Many fundamental problems in infrasound are now being revisited, and infrasonic observations are being integrated with other technologies (such as seismic, strainmeter and infrared) for the discovery of new phenomena or the refinement of geophysical studies. On July 24-25, 2003, the National Science Foundation sponsored a group of infrasound experts and interdisciplinary researchers to convene in Waikoloa, Hawaii, and chart a course for basic US infrasound research. The conveners selected key projects that would lead to significant advances in our understanding of infrasound generated by effusive and explosive volcanoes, ocean swells, bolides, fauna, severe weather, and long-period atmospheric instabilities. Projects were also proposed to refine our knowledge of atmospheric dynamics and transport mechanisms. A sampling of these projects is discussed in light of their contributions to our fundamental scientific understanding and their impact on the geophysical community.

  13. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplment 394

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes-subject and author are included after the abstract section.

  14. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 407

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes-subject and author are included after the abstract section.

  15. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 411

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes- subject and author are included after the abstract section.

  16. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 408

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, a Continuing Bibliography with Indexes (NASA/SP#1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes#subject and author are included after the abstract section.

  17. Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 415

    Science.gov (United States)

    2000-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes-subject and author are included after the abstract section.

  18. The application of artificial intelligence technology to aeronautical system design

    Science.gov (United States)

    Bouchard, E. E.; Kidwell, G. H.; Rogan, J. E.

    1988-01-01

    This paper describes the automation of one class of aeronautical design activity using artificial intelligence and advanced software techniques. Its purpose is to suggest concepts, terminology, and approaches that may be useful in enhancing design automation. By understanding the basic concepts and tasks in design, and the technologies that are available, it will be possible to produce, in the future, systems whose capabilities far exceed those of today's methods. Some of the tasks that will be discussed have already been automated and are in production use, resulting in significant productivity benefits. The concepts and techniques discussed are applicable to all design activity, though aeronautical applications are specifically presented.

  19. Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 414

    Science.gov (United States)

    2000-01-01

    This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes-subject and author are included after the abstract section.

  20. ROMANIAN AERONAUTICAL METEOROLOGY APPLICABLE LEGAL FRAMEWORK –BRIEFING

    Directory of Open Access Journals (Sweden)

    CATALIN POPA

    2012-05-01

    Full Text Available The purpose of this briefing is toprovide an overview of the aeronautical meteorology legal framework in Romania. In this context, the role and importance of aeronautical meteorology in international air traffic management will be underlined, with focus on the civil aviation activity in Romania. The international legal framework and modalities of implementing these rules at national level will constitute a significant part of the present study., Specific accent will be put on the national regulatory framework and structure, means of updating it, and how it responds to changing regulatory requirements.

  1. Design and Application of Economical Process Control Charts

    Directory of Open Access Journals (Sweden)

    S.S.N. Murthy

    1997-01-01

    Full Text Available Statistical quality control techniques are useful in monitoring the process behaviour. Attribute control charts are widely used in process control. The selection of sample size, sampling interval and control width of the control chart is important in minimising the quality costs. Control chart parameters, like 3delta controlimits and fixed fraction sampling at conveniently selected sampling intervals result in deplovable cost penalties in quality control. The best selection of these parameters depends on several process parameters,like frequency of occupancy of a shift in the process, cost of sampling, cost of investigation for finding assignable cause, probability of false alarms, penalty cost of defectives and process correction cost. A general model has been developed to determine the total quality cost as a function of these parameters. Probability of not identifying a process shift (Beeta-risk and probability of wrongly. concluding the process got shifted (alpha-risk are considered in developing the model. This cost equation is optimised to determine optimum values control chart parameters. Fibonacci search is used to quicken the analytical method or determining optimum sampling size and control width. The proposals made by Duncan, Montgomery, Gibra and Chiu for determining the optimum control chart parameters are critically examined and compared with the present model. Case studies were conducted in two foundries. Optimum control chart parameters in casting of cylinder liners and cast plates are determined. It has been found that quality costs are considerably reduced by using optimally designed control chart parameters with proposed method.

  2. Tactile acuity charts: a reliable measure of spatial acuity.

    Science.gov (United States)

    Bruns, Patrick; Camargo, Carlos J; Campanella, Humberto; Esteve, Jaume; Dinse, Hubert R; Röder, Brigitte

    2014-01-01

    For assessing tactile spatial resolution it has recently been recommended to use tactile acuity charts which follow the design principles of the Snellen letter charts for visual acuity and involve active touch. However, it is currently unknown whether acuity thresholds obtained with this newly developed psychophysical procedure are in accordance with established measures of tactile acuity that involve passive contact with fixed duration and control of contact force. Here we directly compared tactile acuity thresholds obtained with the acuity charts to traditional two-point and grating orientation thresholds in a group of young healthy adults. For this purpose, two types of charts, using either Braille-like dot patterns or embossed Landolt rings with different orientations, were adapted from previous studies. Measurements with the two types of charts were equivalent, but generally more reliable with the dot pattern chart. A comparison with the two-point and grating orientation task data showed that the test-retest reliability of the acuity chart measurements after one week was superior to that of the passive methods. Individual thresholds obtained with the acuity charts agreed reasonably with the grating orientation threshold, but less so with the two-point threshold that yielded relatively distinct acuity estimates compared to the other methods. This potentially considerable amount of mismatch between different measures of tactile acuity suggests that tactile spatial resolution is a complex entity that should ideally be measured with different methods in parallel. The simple test procedure and high reliability of the acuity charts makes them a promising complement and alternative to the traditional two-point and grating orientation thresholds.

  3. Tactile acuity charts: a reliable measure of spatial acuity.

    Directory of Open Access Journals (Sweden)

    Patrick Bruns

    Full Text Available For assessing tactile spatial resolution it has recently been recommended to use tactile acuity charts which follow the design principles of the Snellen letter charts for visual acuity and involve active touch. However, it is currently unknown whether acuity thresholds obtained with this newly developed psychophysical procedure are in accordance with established measures of tactile acuity that involve passive contact with fixed duration and control of contact force. Here we directly compared tactile acuity thresholds obtained with the acuity charts to traditional two-point and grating orientation thresholds in a group of young healthy adults. For this purpose, two types of charts, using either Braille-like dot patterns or embossed Landolt rings with different orientations, were adapted from previous studies. Measurements with the two types of charts were equivalent, but generally more reliable with the dot pattern chart. A comparison with the two-point and grating orientation task data showed that the test-retest reliability of the acuity chart measurements after one week was superior to that of the passive methods. Individual thresholds obtained with the acuity charts agreed reasonably with the grating orientation threshold, but less so with the two-point threshold that yielded relatively distinct acuity estimates compared to the other methods. This potentially considerable amount of mismatch between different measures of tactile acuity suggests that tactile spatial resolution is a complex entity that should ideally be measured with different methods in parallel. The simple test procedure and high reliability of the acuity charts makes them a promising complement and alternative to the traditional two-point and grating orientation thresholds.

  4. Create dynamic charts in Microsoft Office Excel 2007 and beyond

    CERN Document Server

    Scheck, Reinhold

    2009-01-01

    Extend your Excel 2007 skills-and create more-powerful and compelling charts in less time. Guided by an Excel expert, you'll learn how to turn flat, static charts into dynamic solutions-where you can visualize and manipulate data countless ways with a simple mouse click. Get the hands-on practice and examples you need to produce your own, professional-quality results. No programming required! Maximize the impact of your ideas and data! Learn how your design decisions affect perception and comprehensionMatch the right chart type to your communication objectiveVisualize-then build-your solut

  5. MDI Synoptic Charts of Magnetic Field: Interpolation of Polar Fields

    Science.gov (United States)

    Liu, Yang; Hoeksema, J. T.; Zhao, X.; Larson, R. M.

    2007-05-01

    In this poster, we compare various methods for interpolation of polar field for the MDI synoptic charts of magnetic field. By examining the coronal and heliospheric magnetic field computed from the synoptic charts based on a Potential Field Source Surface model (PFSS), and by comparing the heliospheric current sheets and footpoints of open fields with the observations, we conclude that the coronal and heliospheric fields calculated from the synoptic charts are sensitive to the polar field interpolation, and a time-dependent interpolation method using the observed polar fields is the best among the seven methods investigated.

  6. Hegira adaptation of the NCHS weight and height charts.

    Science.gov (United States)

    Osman, M I; Magbool, G; Kaul, K K

    1993-03-01

    The ages of Saudi children are recorded and based on the Hegira calendar. When charted on the National Center for Health Statistics (NCHS) weight and height charts, children will be at disadvantage since the Hegira year is shorter than the Gregorian year. In this paper, centiles for the NCHS reference population are estimated for age in Hegira years from 2-18 for height and weight for both sexes using mathematical interpolation. Charts are prepared for use in hospitals and health centers for children whose ages have been reported based on the Hegira calendar. PMID:17588024

  7. Implementation of Calendar Chart in CICS Mainframes for Business Analysis

    Directory of Open Access Journals (Sweden)

    Jayanthi Adilakshmi Visali

    2015-02-01

    Full Text Available This paper provides a business solution to implement Calendar Chart in Mainframes for analysing the progress of a Bank by giving detailed report of number of new accounts created for the bank. A calendar chart is a visualization used to show activity over the course of a long span of time, such as months or years. They're best used when you want to illustrate how some quantity varies depending on the day of the week. This chart gives us the numerals so as to easily analyse the trends over time.

  8. Risk-Adjusted Control Charts for Health Care Monitoring

    Directory of Open Access Journals (Sweden)

    Willem Albers

    2011-01-01

    the distribution involved is negative binomial. However, in health care monitoring, (groups of patients will often belong to different risk categories. In the present paper, we will show how information about category membership can be used to adjust the basic negative binomial charts to the actual risk incurred. Attention is also devoted to comparing such conditional charts to their unconditional counterparts. The latter do take possible heterogeneity into account but refrain from risk-adjustment. Note that in the risk adjusted case several parameters are involved, which will all be typically unknown. Hence, the potentially considerable estimation effects of the new charts will be investigated as well.

  9. 49 CFR 236.338 - Mechanical locking required in accordance with locking sheet and dog chart.

    Science.gov (United States)

    2010-10-01

    ... locking sheet and dog chart. 236.338 Section 236.338 Transportation Other Regulations Relating to... in accordance with locking sheet and dog chart. Mechanical locking shall be in accordance with locking sheet and dog chart currently in effect....

  10. Aeronautical mobile satellite service: Air traffic control applications

    Science.gov (United States)

    Sim, Dave

    1990-01-01

    Canada's history both in aviation and in satellite communications development spans several decades. The introduction of aeronautical mobile satellite communications will serve our requirements for airspace management in areas not served by line-of-sight radio and radar facilities. The ensuing improvements in air safety and operating efficiency are eagerly awaited by the aviation community.

  11. National Aeronautics and Space Administration (NASA) Education 1993-2009

    Science.gov (United States)

    Ivie, Christine M.

    2009-01-01

    The National Aeronautics and Space Administration was established in 1958 and began operating a formal education program in 1993. The purpose of this study was to analyze the education program from 1993-2009 by examining strategic plan documents produced by the NASA education office and interviewing NASA education officials who served during that…

  12. Aeronautics Study Takes Off! Glider Design for Beginners

    Science.gov (United States)

    Lazaros, Edward J.; Carlson, Katie

    2008-01-01

    Study of aeronautics is an interesting and motivating subject for students and educators alike. The activity described in this article--appropriate for upper elementary or middle school students--provides an excellent introduction to airplane design and the science of aerodynamics. It also gives students good experience applying knowledge from a…

  13. A Case Study of Peer Learning in Higher Aeronautical Education

    Science.gov (United States)

    Borglund, Dan

    2007-01-01

    In order to improve student learning in an advanced course in aeronautics, lectures are replaced with more student-centred sessions based on peer learning. The course is organised in student teams, with the main task of delivering lecture requests for full class discussions. For the same reason, the written theory exam is replaced by a peer review…

  14. International law and regulation of aeronautical public correspondence by satellite

    NARCIS (Netherlands)

    Brisibe, Tare

    2006-01-01

    This work covers the evolution of satellite based Aeronautical Public Correspondence and the operational environment in which services are being offered. Followed by an examination of applicable rules, including the relevant institutions from which they emanate, attention is devoted to questions on

  15. 77 FR 71089 - Pilot Loading of Aeronautical Database Updates

    Science.gov (United States)

    2012-11-29

    ... FAA issued regulations (61 FR 19498) categorizing pilot-performed updates of navigation databases as... regulations in the NPRM (76 FR 64859, October 19, 2011), by removing the task of updating databases used in... Federal Aviation Administration 14 CFR Part 43 RIN 2120-AJ91 Pilot Loading of Aeronautical...

  16. Webcharts – A Web-based Charting Library for Custom Interactive Data Visualization

    OpenAIRE

    Nathan Bryant; Jeremy Wildfire

    2016-01-01

    Webcharts is a JavaScript library built on top of D3.js that creates reusable, flexible, interactive charts that are highly customizable. Webcharts provides a method for creating commonly-used charts, including bar charts, scatterplots, and timelines, through a simple configuration scheme. Charts created with Webcharts allow users to dynamically manipulate chart data, appearance, and behavior both through callback functions and input elements that are tied to chart objects. This approach allo...

  17. 78 FR 15804 - Waiver of Aeronautical Land-Use Assurance: Rolla National Airport (VIH), Rolla, MO

    Science.gov (United States)

    2013-03-12

    ... Federal Aviation Administration Waiver of Aeronautical Land-Use Assurance: Rolla National Airport (VIH... airport property at the Rolla National Airport (VIH) from aeronautical use to non-aeronautical for revenue... Airport (VIH) is proposing the release of one parcel, of 10 acres, more or less from aeronautical to...

  18. 75 FR 81678 - Aeronautics Science and Technology Subcommittee; Committee on Technology; National Science and...

    Science.gov (United States)

    2010-12-28

    ... TECHNOLOGY POLICY Aeronautics Science and Technology Subcommittee; Committee on Technology; National Science... Aeronautics Research, Development, Test and Evaluation (RDT&E) Infrastructure Plan. SUMMARY: The Aeronautics...) Committee on Technology will hold a public meeting ] to review and discuss the National Aeronautics...

  19. Aeronautics: An Educator's Guide with Activities in Science, Mathematics, and Technology Education.

    Science.gov (United States)

    National Aeronautics and Space Administration, Washington, DC.

    This educator's guide, developed for students in grades 2-4, discusses the field of aeronautics. It begins with education standards and skill matrices for the classroom activities, a description of the National Aeronautics and Space Administration (NASA) aeronautics mission, and a brief history of aeronautics. Activities are written for the…

  20. System Behaviour Charts Inform an Understanding of Biodiversity Recovery

    Directory of Open Access Journals (Sweden)

    Simon A. Black

    2015-01-01

    Full Text Available Practitioners working with species and ecosystem recovery typically deal with the complexity of, on one hand, lack of data or data uncertainties and, on the other hand, demand for critical decision-making and intervention. The control chart methods of commercial and industrial and environmental monitoring can complement an ecological understanding of wildlife systems including those situations which incorporate human activities and land use. Systems Behaviour Charts are based upon well-established control chart methods to provide conservation managers with an approach to using existing data and enable insight to aid timely planning of conservation interventions and also complement and stimulate research into wider scientific and ecological questions. When the approach is applied to existing data sets in well-known wildlife conservation cases, the subsequent Systems Behaviour Charts and associated analytical criteria demonstrate insights which would be helpful in averting problems associated with each case example.

  1. Visual mining geo-related data using pixel bar charts

    Science.gov (United States)

    Hao, Ming C.; Keim, Daniel A.; Dayal, Umeshwar; Wright, Peter; Schneidewind, Joern

    2005-03-01

    A common approach to analyze geo-related data is using bar charts or x-y plots. They are intuitive and easy to use. But important information often gets lost. In this paper, we introduce a new interactive visualization technique called Geo Pixel Bar Charts, which combines the advantages of Pixel Bar Charts and interactive maps. This technique allows analysts to visualize large amounts of spatial data without aggregation and shows the geographical regions corresponding to the spatial data attribute at the same time. In this paper, we apply Geo Pixel Bar Charts to visually mining sales transactions and Internet usage from different locations. Our experimental results show the effectiveness of this technique for providing data distribution and exceptions from the map.

  2. Another Look at the EWMA Control Chart with Estimated Parameters

    NARCIS (Netherlands)

    N.A. Saleh; M.A. Mahmoud; L.A. Jones-Farmer; I. Zwetsloot; W.H. Woodall

    2015-01-01

    The authors assess the in-control performance of the exponentially weighted moving average (EWMA) control chart in terms of the SDARL and percentiles of the ARL distribution when the process parameters are estimated.

  3. Robust control charts in industrial production of olive oil

    Science.gov (United States)

    Grilo, Luís M.; Mateus, Dina M. R.; Alves, Ana C.; Grilo, Helena L.

    2014-10-01

    Acidity is one of the most important variables in the quality analysis and characterization of olive oil. During the industrial production we use individuals and moving range charts to monitor this variable, which is not always normal distributed. After a brief exploratory data analysis, where we use the bootstrap method, we construct control charts, before and after a Box-Cox transformation, and compare their robustness and performance.

  4. Evaluation of Live Sequence Charts Using Play Engine Tool

    OpenAIRE

    Gopidi, Vijay Kumar

    2005-01-01

    Capturing a requirement is a great challenge in the initial stages of the software development, be it a system requirement or a customer requirement to the software engineers. Understanding the requirement and predicting or differentiating what may happen and what must happen is difficult especially in the complex real time systems. Live sequence charts are extensions of the message sequence charts which can specify the live ness of the requirements. And the play engine tool is used to specif...

  5. Study on Chart Based on Short Production Run

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    High intellectual, high flexible automatic manufacturing system based on low volume production is the trend in the future, but the traditional control charts whose control limits are based on at least 20~25 subgroups of five observations each are not suitable in this environment. The paper presents variance control chart used in small batch production in which there are not sufficient observations. The control limits are set reliably without restriction of the number of samples.

  6. Visual mining business service using pixel bar charts

    Science.gov (United States)

    Hao, Ming C.; Dayal, Umeshwar; Casati, Fabio

    2004-06-01

    Basic bar charts have been commonly available, but they only show highly aggregated data. Finding the valuable information hidden in the data is essential to the success of business. We describe a new visualization technique called pixel bar charts, which are derived from regular bar charts. The basic idea of a pixel bar chart is to present all data values directly instead of aggregating them into a few data values. Pixel bar charts provide data distribution and exceptions besides aggregated data. The approach is to represent each data item (e.g. a business transaction) by a single pixel in the bar chart. The attribute of each data item is encoded into the pixel color and can be accessed and drilled down to the detail information as needed. Different color mappings are used to represent multiple attributes. This technique has been prototyped in three business service applications-Business Operation Analysis, Sales Analysis, and Service Level Agreement Analysis at Hewlett Packard Laboratories. Our applications show the wide applicability and usefulness of this new idea.

  7. Economic design of VSI GCCC charts for correlated samples

    Directory of Open Access Journals (Sweden)

    Y K Chen

    2013-08-01

    Full Text Available Generalised cumulative count of conforming (GCCC charts have been proposed for monitoring a high-yield process that allows the items to be inspected sample by sample and not according to the production order. Recent study has shown that the GCCC chart with a variable sampling interval (VSI is superior to the traditional one with a fixed sampling interval (FSI because of the additional flexibility of sampling interval it offers. However, the VSI chart is still costly when used for the prevention of defective products. This paper presents an economic model for the design problem of the VSI GCCC chart, taking into account the correlation of the production outputs within the same sample. In the economic design, a cost function is developed that includes the cost of sampling and inspection, the cost of false alarms, the cost of detecting and removing the assignable cause, and the cost when the process is out-of-control. An evolutionary search method using the cost function is presented for finding the optimal design parameters of the VSI GCCC chart. Comparisons between VSI and FSI charts for expected cost per unit time are also made for various process and cost parameters.

  8. A Combined Control Chart for Identifying Out–Of–Control Points in Multivariate Processes

    Directory of Open Access Journals (Sweden)

    Marroquín–Prado E.

    2010-10-01

    Full Text Available The Hotelling's T2 control chart is widely used to identify out–of–control signals in multivariate processes. However, this chart is not sensitive to small shifts in the process mean vec tor. In this work we propose a control chart to identify out–of–control signals. The proposed chart is a combination of Hotelling's T2 chart, M chart proposed by Hayter et al. (1994 and a new chart based on Principal Components. The combination of these charts identifies any type and size of change in the process mean vector. Us ing simulation and the Average Run Length (ARL, the performance of the proposed control chart is evaluated. The ARL means the average points within control before an out–of–control point is detected, The results of the simulation show that the proposed chart is more sensitive that each one of the three charts individually

  9. Chemical Gas Sensors for Aeronautics and Space Applications III

    Science.gov (United States)

    Hunter, G. W.; Neudeck, P. G.; Chen, L. Y.; Liu, C. C.; Wu, Q. H.; Sawayda, M. S.; Jin, Z.; Hammond, J.; Makel, D.; Liu, M.; Rauch, W. A.; Hall, G.

    1999-01-01

    Aeronautic and space applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. Areas of interest include launch vehicle safety monitoring, emission monitoring, and fire detection. This paper discusses the needs of aeronautic and space applications and the point-contact sensor technology being developed to address these needs. The development of these sensors is based on progress in two types of technology: 1) Micromachining and microfabrication technology to fabricate miniaturized sensors. 2) The development of high temperature semiconductors, especially silicon carbide. Sensor development for each application involves its own challenges in the fields of materials science and fabrication technology. The number of dual-use commercial applications of this microfabricated gas sensor technology make this area of sensor development a field of significant interest.

  10. Chemical Gas Sensors for Aeronautic and Space Applications 2

    Science.gov (United States)

    Hunter, G. W.; Chen, L. Y.; Neudeck, P. G.; Knight, D.; Liu, C. C.; Wu, Q. H.; Zhou, H. J.; Makel, D.; Liu, M.; Rauch, W. A.

    1998-01-01

    Aeronautic and Space applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. Areas of most interest include launch vehicle safety monitoring emission monitoring and fire detection. This paper discusses the needs of aeronautic and space applications and the point-contact sensor technology being developed to address these needs. The development of these sensor is based on progress two types of technology: 1) Micro-machining and micro-fabrication technology to fabricate miniaturized sensors. 2) The development of high temperature semiconductors, especially silicon carbide. Sensor development for each application involves its own challenges in the fields of materials science and fabrication technology. The number of dual-use commercial applications of this micro-fabricated gas sensor technology make this area of sensor development a field of significant interest.

  11. Chemical Gas Sensors for Aeronautic and Space Applications

    Science.gov (United States)

    Hunter, Gary W.; Chen, Liang-Yu; Neudeck, Philip G.; Knight, Dak; Liu, Chung-Chiun; Wu, Quing-Hai; Zhou, Huan-Jun

    1997-01-01

    Aeronautic and space applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. Two areas of particular interest are safety monitoring and emission monitoring. In safety monitoring, detection of low concentrations of hydrogen at potentially low temperatures is important while for emission monitoring the detection of nitrogen oxides, hydrogen, hydrocarbons and oxygen is of interest. This paper discusses the needs of aeronautic and space applications and the point-contact sensor technology being developed to address these needs. The development of these sensors is based on progress in two types of technology: (1) Micromachining and microfabrication technology to fabricate miniaturized sensors. (2) The development of high temperature semiconductors, especially silicon carbide. The detection of each type of gas involves its own challenges in the fields of materials science and fabrication technology. The number of dual-use commercial applications of this microfabricated gas sensor technology make this general area of sensor development a field of significant interest.

  12. National Aeronautics and Space Administration Fiscal Year 2001 Accountability Report

    Science.gov (United States)

    2002-01-01

    The National Aeronautics and Space Administration (NASA) is an independent Agency established to plan and manage the future of the Nation's civil aeronautics and space program. This Accountability Report covers Federal Fiscal Year (FY) 2001 (October 1, 2000, through September 30, 2001), with discussion of some subsequent events. The Report contains an overview addressing the Agency's critical programs and financial performance and includes highlights of performance organized by goals and objectives of the Enterprises and Crosscutting Processes. The Report also summarizes NASA's stewardship over budget and financial resources, including audited financial statements and footnotes. The financial statements reflect an overall position of offices and activities, including assets and liabilities, as well as results of operations, pursuant to requirements of Federal law (31 U.S.C. 3515(b)). The auditor's opinions on NASA's financial statements, reports on internal controls, and compliance with laws and regulations are included in this report.

  13. CLUSTERING THE TECHNICAL CAPABILITY IN THE BRAZILIAN AERONAUTICAL MAINTENANCE INDUSTRY

    OpenAIRE

    Marcio Cardoso Machado; Ligia Maria Soto Urbina; Rodrigo Scarpel

    2013-01-01

    In the sectors where equipment requiring services of maintenance are technologically complex and advanced, such as in the air transportation, knowing and managing the technical capability of the enterprises of the sector can be a good way maximizing the efforts of training. This paper attempts to present a process of technical capability clustering for the aeronautical maintenance industry, in order to provide a usable overview of the sector competences. The findings present a unique insight ...

  14. New trends for the NDT of aeronautic welds

    Science.gov (United States)

    Ithurralde, G.; Simonet, D.; Choffy, J.-P.; Bernard, L.

    2001-04-01

    Recent advances in laser beam welding, electron beam welding and friction stir welding enable to join aeronautic and space alloys (mainly aluminum based) and think about new welded design for structural parts at a lower cost. This paper deals with both the non destructive testing approach implemented for welding process optimization, and the NDT multi-sensors tools selected because of their ability for on-line defect tracking automation.

  15. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report

    Science.gov (United States)

    Bowen, Brent D.; Fink, Mary M.; Nickerson, Jocelyn S.

    2002-01-01

    This report presents and overview of the Aeronautics Education, Research, and Industry Alliance (AERIAL). It covers the University of Nebraska's areas of research, and its outreach to students at Native American schools as part of AERIAL. The report contains three papers: "Airborne Remote Sensing (ARS) for Agricultural Research and Commercialization Application" (White Paper), "Validated Numerical Models for the Convective Extinction of Fuel Droplets (CEFD)", and "The Small Aircraft Transportation System (SATS): Research Collaborations with the NASA Langley Research Center".

  16. Aeronautics and Aviation Science: Careers and Opportunities Project

    Science.gov (United States)

    Texter, P. Cardie

    1998-01-01

    The National Aeronautics and Space Administration funded project, Aeronautics and Aviation Science: Careers and Opportunities has been in operation since July, 1995. This project operated as a collaboration with Massachusetts Corporation for Educational Telecommunications, the Federal Aviation Administration, Bridgewater State College and four targeted "core sites" in the greater Boston area. In its first and second years, a video series on aeronautics and aviation science was developed and broadcast via "live, interactive" satellite feed. Accompanying teacher and student supplementary instructional materials for grades 6-9 were produced and disseminated by the Massachusetts Corporation for Educational Telecommunications (MCET). In the MCET grant application it states that project Take Off! in its initial phase would recruit and train teachers at "core" sites in the greater Boston area, as well as opening participation to other on-line users of MCET's satellite feeds. "Core site" classrooms would become equipped so that teachers and students might become engaged in an interactive format which aimed at not only involving the students during the "live" broadcast of the instructional video series, but which would encourage participation in electronic information gathering and sharing among participants. As a Take Off! project goal, four schools with a higher than average proportion of minority and underrepresented youth were invited to become involved with the project to give these students the opportunity to consider career exploration and development in the field of science aviation and aeronautics. The four sites chosen to participate in this project were: East Boston High School, Dorchester High School, Randolph Junior-Senior High School and Malden High School. In year 3 Dorchester was unable to continue to fully participate and exited out. Danvers was added to the "core site" list in year 3. In consideration of Goals 2000, the National Science Foundation

  17. 48 CFR 252.245-7000 - Government-furnished mapping, charting, and geodesy property.

    Science.gov (United States)

    2010-10-01

    ... mapping, charting, and geodesy property. 252.245-7000 Section 252.245-7000 Federal Acquisition Regulations..., charting, and geodesy property. As prescribed in 245.107-70, use the following clause: Government-Furnished Mapping, Charting, and Geodesy Property (DEC 1991) (a) Definition—Mapping, charting, and geodesy...

  18. Growth charts for children with Ellis-van Creveld syndrome.

    Science.gov (United States)

    Verbeek, Sabine; Eilers, Paul H C; Lawrence, Kate; Hennekam, Raoul C M; Versteegh, Florens G A

    2011-02-01

    Ellis-van Creveld (EvC) syndrome is a congenital malformation syndrome with marked growth retardation. In this study, specific growth charts for EvC patients were derived to allow better follow-up of growth and earlier detection of growth patterns unusual for EvC. With the use of 235 observations of 101 EvC patients (49 males, 52 females), growth charts for males and females from 0 to 20 years of age were derived. Longitudinal and cross-sectional data were collected from an earlier review of growth data in EvC, a database of EvC patients, and from recent literature. To model the growth charts, the GAMLSS package for the R statistical program was used. Height of EvC patients was compared to healthy children using Dutch growth charts. Data are presented both on a scale for age and on a scale for the square root of age. Compared to healthy Dutch children, mean height standard deviation score values for male and female EvC patients were -3.1 and -3.0, respectively. The present growth charts should be useful in the follow-up of EvC patients. Most importantly, early detection of growth hormone deficiency, known to occur in EvC, will be facilitated.

  19. Historical Map & Chart Collection of NOAA's Nautical Charts, Hydrographic Surveys, Topographic Surveys, Geodetic Surveys, City Plans, and Civil War Battle Maps Starting from the mid 1700's

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Map and Chart Collection of the Office of Coast Survey contains over 20000 historical maps and charts from the mid 1700s through the late 1900s....

  20. Take Off! Aeronautics and Aviation Science: Careers and Opportunities

    Science.gov (United States)

    1998-01-01

    Funded by National Aeronautic and Space Administration's High Performance Computing and Communications/ Learning Technologies Project (HPCC/LTP) Cooperative Agreement, Aeronautics and aviation Science: Careers and Opportunities was operative from July 1995 through July 1998. This project operated as a collaboration with Massachusetts Corporation for Educational Telecommunications, the Federal Aviation Administration, Bridgewater State College and four targeted "core sites" in the greater Boston area: Dorchester, Malden, East Boston and Randolph. In its first and second years, a video series with a participatory website on aeronautics and aviation science was developed and broadcast via "live, interactive" satellite feed. Accompanying teacher and student supplementary instructional materials for grades 6-12 were produced and disseminated by the Massachusetts Corporation for Educational Telecommunications (MCET). In year three, the project team redesigned the website, edited 14 videos to a five part thematic unit, and developed a teacher's guide to the video and web materials supplement for MAC and PC platforms, aligned with national standards. In the MCET grant application it states that project Take Off! in its initial phase would recruit and train teachers at "core" sites in the greater Boston area, as well as opening participation to other on-line users of MCET's satellite feeds. "Core site" classrooms would become equipped so that teachers and students might become engaged in an interactive format which aimed at not only involving the students during the "live" broadcast of the instructional video series, but which would encourage participation in electronic information gathering and sharing among participants. As a Take Off! project goal, four schools with a higher than average proportion of minority and underrepresented youth were invited to become involved with the project to give these students the opportunity to consider career exploration and development

  1. FY11 Facility Assessment Study for Aeronautics Test Program

    Science.gov (United States)

    Loboda, John A.; Sydnor, George H.

    2013-01-01

    This paper presents the approach and results for the Aeronautics Test Program (ATP) FY11 Facility Assessment Project. ATP commissioned assessments in FY07 and FY11 to aid in the understanding of the current condition and reliability of its facilities and their ability to meet current and future (five year horizon) test requirements. The principle output of the assessment was a database of facility unique, prioritized investments projects with budgetary cost estimates. This database was also used to identify trends for the condition of facility systems.

  2. Aeronautical Magnetic Torque Limiter for Passive Protection against Overloads

    Directory of Open Access Journals (Sweden)

    Cristian Cristache

    2016-09-01

    Full Text Available Actual aerospace and defense technologies present multiple limitations that need to be overcome in order to evolve to less contaminating and more efficient aircraft solutions. Contactless technologies come with essential advantages such as the absence of wear and friction. This work describes the design, prototype, and performance test according to RTCA-DO-160 of an aeronautical magnetic torque limiter. The results show correct continuous transmission operation (2250 rpm and 24 Nm from −50 °C to +90 °C. Moreover, overload protection has been demonstrated for more than 200 jamming events without damage or required maintenance to the device.

  3. A Flexible System for Simulating Aeronautical Telecommunication Network

    Science.gov (United States)

    Maly, Kurt; Overstreet, C. M.; Andey, R.

    1998-01-01

    At Old Dominion University, we have built Aeronautical Telecommunication Network (ATN) Simulator with NASA being the fund provider. It provides a means to evaluate the impact of modified router scheduling algorithms on the network efficiency, to perform capacity studies on various network topologies and to monitor and study various aspects of ATN through graphical user interface (GUI). In this paper we describe briefly about the proposed ATN model and our abstraction of this model. Later we describe our simulator architecture highlighting some of the design specifications, scheduling algorithms and user interface. At the end, we have provided the results of performance studies on this simulator.

  4. CLUSTERING THE TECHNICAL CAPABILITY IN THE BRAZILIAN AERONAUTICAL MAINTENANCE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Marcio Cardoso Machado

    2013-11-01

    Full Text Available In the sectors where equipment requiring services of maintenance are technologically complex and advanced, such as in the air transportation, knowing and managing the technical capability of the enterprises of the sector can be a good way maximizing the efforts of training. This paper attempts to present a process of technical capability clustering for the aeronautical maintenance industry, in order to provide a usable overview of the sector competences. The findings present a unique insight into the understanding of competences clustering that may be used across different industries.

  5. Information Systems for NASA's Aeronautics and Space Enterprises

    Science.gov (United States)

    Kutler, Paul

    1998-01-01

    The aerospace industry is being challenged to reduce costs and development time as well as utilize new technologies to improve product performance. Information technology (IT) is the key to providing revolutionary solutions to the challenges posed by the increasing complexity of NASA's aeronautics and space missions and the sophisticated nature of the systems that enable them. The NASA Ames vision is to develop technologies enabling the information age, expanding the frontiers of knowledge for aeronautics and space, improving America's competitive position, and inspiring future generations. Ames' missions to accomplish that vision include: 1) performing research to support the American aviation community through the unique integration of computation, experimentation, simulation and flight testing, 2) studying the health of our planet, understanding living systems in space and the origins of the universe, developing technologies for space flight, and 3) to research, develop and deliver information technologies and applications. Information technology may be defined as the use of advance computing systems to generate data, analyze data, transform data into knowledge and to use as an aid in the decision-making process. The knowledge from transformed data can be displayed in visual, virtual and multimedia environments. The decision-making process can be fully autonomous or aided by a cognitive processes, i.e., computational aids designed to leverage human capacities. IT Systems can learn as they go, developing the capability to make decisions or aid the decision making process on the basis of experiences gained using limited data inputs. In the future, information systems will be used to aid space mission synthesis, virtual aerospace system design, aid damaged aircraft during landing, perform robotic surgery, and monitor the health and status of spacecraft and planetary probes. NASA Ames through the Center of Excellence for Information Technology Office is leading the

  6. International negotiations on the Electronic Navigational Chart (ENC)

    Science.gov (United States)

    A full report is given (in English) on the topics discussed and measures adopted at the April and September 1988 meetings of the IMO/IHO Working Group on ENC Updating, a subcommittee of the Commitee on ECDIS (Electronic Chart Display and Information System). Consideration is given to provisional performance standards for ECDIS (minimum displays, supplementary information, scale, route planning and monitoring, documentation, symbols and colors, accuracy, provision and correction of data, etc.), ENC update procedures, radio navigation warnings, the Global Maritime Distress and Safety System, information transfer protocols, automatic and semiautomatic updating, and organizational problems. Diagrams, sample charts, and a glossary of acronyms are provided.

  7. jsGraph and jsNMR—Advanced Scientific Charting

    Directory of Open Access Journals (Sweden)

    Norman Pellet

    2014-09-01

    Full Text Available The jsGraph library is a versatile javascript library that allows advanced charting to be rendered interactively in web browsers without relying on server-side image processing. jsGraph is released under the MIT license and is free of charge. While being highly customizable through an intuitive javascript API, jsGraph is optimized to render a large quantity of data in a short amount of time. jsGraphs can display line, scatter, contour or zone series. Examples can be consulted on the project home page [1]. Customization of the chart, its axis and its series is achieved through simple but comprehensive JSON configurations.

  8. The designer's guide to presenting numbers, figures, and charts

    CERN Document Server

    Bigwood, Sally

    2013-01-01

    Numbers can tell an exciting story. The trick is to know what story to tell and make it understandable. This compact, practical guide will show everyone who must design numeric data how to transform raw data into readable, relevant information.The Designer's Guide to Presenting Numbers, Figures, and Charts brings together the guidelines established over the last forty years for making effective presentations of figures, tables, and graphs. Included are the straightforward steps designers and other professionals can take to make their tables and charts the most meaningful. The authors define an

  9. Efficiency, Robustness, and Accuracy in Picky Chart Parsing

    CERN Document Server

    Magerman, D M; Magerman, David M.; Weir, Carl

    1994-01-01

    This paper describes Picky, a probabilistic agenda-based chart parsing algorithm which uses a technique called {\\em probabilistic prediction} to predict which grammar rules are likely to lead to an acceptable parse of the input. Using a suboptimal search method, Picky significantly reduces the number of edges produced by CKY-like chart parsing algorithms, while maintaining the robustness of pure bottom-up parsers and the accuracy of existing probabilistic parsers. Experiments using Picky demonstrate how probabilistic modelling can impact upon the efficiency, robustness and accuracy of a parser.

  10. Fault detection in electric power systems based on control charts

    Directory of Open Access Journals (Sweden)

    Kisić Emilija

    2013-01-01

    Full Text Available This paper analyzes the control system of the combustion process and protection from explosions in the boiler furnace of thermal power plant using the techniques of control charts. The data from old and newly introduced system for measuring under-pressure differences in boiler furnace at unit B2, TE Nikola Tesla (TENT Obrenovac, were analyzed. The signal of undepressure difference is used for boiler protection function in thermal power plant TENT B. The results that confirm the advantages of the newly introduced system of measurements are presented. A detailed discussion about the benefits and the shortcomings of the control charts application in industrial processes are given in the paper.

  11. DASHBOARDS & CONTROL CHARTS EXPERIENCES IN IMPROVING SAFETY AT HANFORD WASHINGTON

    Energy Technology Data Exchange (ETDEWEB)

    PREVETTE, S.S.

    2006-02-27

    The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Dashboards, Leading Indicators, Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork, they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites.

  12. Global energy issues affecting aeronautics: a reasoned conjecture

    Science.gov (United States)

    Allen, John E.

    1999-07-01

    This paper is a reasoned conjecture of the future up to 2050 AD including estimates of energy supply and consumption, transport system developments and corresponding pollution effects. Results of the logistic substitution methods (Volterra-Lotka) are used in forecasting trends in innovation, transport and energy. Later work on normative forecasts is also included. The future of aeronautics cannot be isolated from events in other transport modes which together create the major problem of crude oil replacement during the next century. Natural gas will be the dominant energy source for the next 80 years and a major question is how best to use it for aviation. The work on which this paper is based was started in 1992 to answer the following questions: Is the future oil shortfall sufficient to restrict aviation traffic and growth in the next 50 years? If so, what is its substitute? Can a substitute be obtained cheaply enough to free aviation from future kerosine shortages? Is it paramount to change to liquid hydrogen fuel to avoid future fuel shortage in aeronautics, incidentally conferring possible environmental advantages? There was no adequate evidence available to answer these questions, hence a method was devised to bring together several sets of partial data that contributed to the solution. The essence is to use the mean annual growth rate of traffic or energy over a future period as a pseudo-independent variable. This allows the inclusion of alternative high and low estimates of all the important quantities involved.

  13. 3 CFR - Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator

    Science.gov (United States)

    2010-01-01

    ... 3 The President 1 2010-01-01 2010-01-01 false Designation of Officers of the National Aeronautics... Memorandum of January 16, 2009 Designation of Officers of the National Aeronautics And Space Administration To Act as Administrator Memorandum for the Administrator of the National Aeronautics and...

  14. 78 FR 38091 - Airworthiness Criteria: Proposed Airship Design Criteria for Lockheed Martin Aeronautics Model...

    Science.gov (United States)

    2013-06-25

    ... Register published on April 11, 2000 (65 FR 19477-19478), as well as at http://DocketsInfo.dot.gov . Docket... Martin Aeronautics Model LMZ1M Airship AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice... Aeronautics model LMZ1M airship. On March 12, 2012 Lockheed Martin Aeronautics submitted an application...

  15. 77 FR 7183 - Public Availability of the National Aeronautics and Space Administration FY 2011 Service Contract...

    Science.gov (United States)

    2012-02-10

    ... SPACE ADMINISTRATION Public Availability of the National Aeronautics and Space Administration FY 2011 Service Contract Inventory AGENCY: National Aeronautics and Space Administration. ACTION: Notice of Public... 2010 (Pub. L. 111-117), National Aeronautics and Space Administration (NASA) is publishing this...

  16. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-19

    This document is the organizational chart for the US NRC. It contains organizational structure and functional statements for the following: (1) the Commission, (2) committees and boards, (3) staff offices, (4) office of the Inspector General, (5) executive director for operations, (6) program offices, and (7) regional offices.

  17. Information Technology and the Organization Chart of Public Administration

    NARCIS (Netherlands)

    Zouridis, S.; Snellen, I.Th.M.; van de Donk, W.B.H.J.

    1998-01-01

    To a certain extent the organization chart of public administration is inspired by the doctrines which are offered by public administration science. Some of these doctrines relate to policy implementation and the design of implementing agencies. In this chapter three of these main doctrines are disc

  18. Growth charts for children with Ellis-van Creveld syndrome

    NARCIS (Netherlands)

    S. Verbeek (Sabine); P.H.C. Eilers (Paul); K.A. Lawrence (Karen); R.C.M. Hennekam (Raoul); F.G. Versteegh (Florens)

    2011-01-01

    textabstractEllis-van Creveld (EvC) syndrome is a congenital malformation syndrome with marked growth retardation. In this study, specific growth charts for EvC patients were derived to allow better follow-up of growth and earlier detection of growth patterns unusual for EvC. With the use of 235 obs

  19. The 'History and Fate of the Universe' chart debuts

    CERN Multimedia

    Yarris, L

    2003-01-01

    A chart that illustrates and summarizes what is now known about the history and fate of the universe has been developed by scientists at the Lawrence Berkeley National Laboratory in collaboration with the Contemporary Physics Education Project (CPEP). More than 11,000 copies will be distributed to high school science teachers across the nation for field-testing with their students (1 page).

  20. Individuals charts and additional tests for changes in spread

    NARCIS (Netherlands)

    Trip, Albert; Wieringa, Jaap E.

    2003-01-01

    Some authors recommend the use of an additional test for detecting increases in the spread, when using a control chart for individual observations. We examine this recommendation both in a practical situation and theoretically. Both studies show that the additional test gives somewhat more power for

  1. Constant-Pressure Combustion Charts Including Effects of Diluent Addition

    Science.gov (United States)

    Turner, L Richard; Bogart, Donald

    1949-01-01

    Charts are presented for the calculation of (a) the final temperatures and the temperature changes involved in constant-pressure combustion processes of air and in products of combustion of air and hydrocarbon fuels, and (b) the quantity of hydrocarbon fuels required in order to attain a specified combustion temperature when water, alcohol, water-alcohol mixtures, liquid ammonia, liquid carbon dioxide, liquid nitrogen, liquid oxygen, or their mixtures are added to air as diluents or refrigerants. The ideal combustion process and combustion with incomplete heat release from the primary fuel and from combustible diluents are considered. The effect of preheating the mixture of air and diluents and the effect of an initial water-vapor content in the combustion air on the required fuel quantity are also included. The charts are applicable only to processes in which the final mixture is leaner than stoichiometric and at temperatures where dissociation is unimportant. A chart is also included to permit the calculation of the stoichiometric ratio of hydrocarbon fuel to air with diluent addition. The use of the charts is illustrated by numerical examples.

  2. Reference chart for relative weight change to detect hypernatraemic dehydration

    NARCIS (Netherlands)

    Dommelen, P. van; Wouwe, J.P. van; Breuning-Boers, J.M.; Buuren, S. van; Verkerk, P.H.

    2007-01-01

    Objective: The validity of the rule of thumb that infants may have a weight loss of 10% in the first days after birth is unknown. We assessed the validity of this and other rules to detect breast-fed infants with hypernatraemic dehydration. Design: A reference chart for relative weight change was co

  3. Single-field isodose charts for high-energy radiation

    International Nuclear Information System (INIS)

    The main part of this guide comprises isodose chart specifications divided into four sections: cesium-137 gamma rays, cobalt-60 gamma rays, high-energy x-rays and electron beams. In each section the information is further classified according to the equipment model and the institution of origin. 1 fig

  4. US Nuclear Regulatory Commission organization charts and functional statements

    International Nuclear Information System (INIS)

    This document is the organizational chart for the US NRC. It contains organizational structure and functional statements for the following: (1) the Commission, (2) committees and boards, (3) staff offices, (4) office of the Inspector General, (5) executive director for operations, (6) program offices, and (7) regional offices

  5. ICoN, the Interactive Chart of Nuclides

    Science.gov (United States)

    Lee, Kevin; Mumpower, Matthew; Aprahamian, Ani

    2015-10-01

    Nuclear data is critical to research fields from medicine to astrophysics. The chart of nuclides is a more descriptive version of the periodic table that can be used to visualize nuclear properties such as half-lives and mass. We have created ICoN (simply short for Interactive Chart of Nuclides), an API which can be used to visualize theoretical and experimental datasets. This visualization is achieved by using D3 (Data Driven Documents), HTML, and CSS3 to plot the elements and color them accordingly. ICoN features many customization options that users can access that are dynamically applied to the chart without reloading the page. Users can save the customized chart they create to various formats. We have constructed these features in order to provide a unique approach for researchers to interface with nuclear data. ICoN can also be used on all electronic devices without loss of support. We report on the current progress of this project and will present a working demo that highlights each aspect of the aforementioned features. This is the first time that all available technologies are put to use to make nuclear data more accessible than ever before. This is a first and we will make it available as open source ware.

  6. US Nuclear Regulatory Commission organization charts and functional statements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This document contains organization charts for the U.S. Nuclear Regulatory Commission (NRC) and for the five offices of the NRC. Function statements are provided delineating the major responsibilities and operations of each office. Organization and function are provided to the branch level. The head of each office, division, and branch is also listed.

  7. 40 CFR 86.343-79 - Chart reading.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Chart reading. 86.343-79 Section 86.343-79 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... reading. (a) A computer or any other automatic data processing device(s) may be used as long as the...

  8. Cover Crop Chart: An Intuitive Educational Resource for Extension Professionals

    Science.gov (United States)

    Liebig, Mark A.; Johnson, Holly; Archer, David; Hendrickson, John; Nichols, Kristine; Schmer, Marty; Tanaka, Don

    2013-01-01

    Interest in cover crops by agricultural producers has increased the need for information regarding the suitability of crops for addressing different production and natural resource goals. To help address this need, staff at the USDA-ARS Northern Great Plains Research Laboratory developed a decision aid called the Cover Crop Chart (CCC). Visually…

  9. US Nuclear Regulatory Commission organization charts and functional statements

    International Nuclear Information System (INIS)

    This document contains organization charts for the U.S. Nuclear Regulatory Commission (NRC) and for the five offices of the NRC. Function statements are provided delineating the major responsibilities and operations of each office. Organization and function are provided to the branch level. The head of each office, division, and branch is also listed

  10. A Chart Review of Schizotypal Personality Disorders in Children.

    Science.gov (United States)

    Nagy, Joan; Szatmari, Peter

    1986-01-01

    The literature on the diagnostic validity of schizotypal personality disorders (SPD) in childhood is reviewed, and the results of a chart review of 20 SPD children meeting Diagnostic and Statistical Manual III criteria are presented suggesting that SPD in childhood exists and warrants study. (Author/CB)

  11. A Cause-Consequence Chart of a Redundant Protection System

    DEFF Research Database (Denmark)

    Nielsen, Dan Sandvik; Platz, O.; Runge, B.

    1975-01-01

    A cause-consequence chart is applied in analysing failures of a redundant protection system (a core spray system in a nuclear power plant). It is shown how the diagram provides a basis for calculating two probability measures for malfunctioning of the protection system. The test policy...

  12. TerCharts: a VBA-MS Excel multiternary and multipurpose charting utility for data analysis, presentation, and modeling in environmental and earth sciences

    Science.gov (United States)

    Esawi, E. K.

    2009-03-01

    TerCharts is a comprehensive, fast, flexible, and versatile ternary charting utility that can be used for ternary data presentation analysis and modeling across many scientific disciplines. TerCharts is developed using Microsoft (MS) Excel 2003 and Visual Basic for Applications (VBA) which is an object oriented programming language developed by MS as a tool to enhance the capabilities of MS products. The Excel-VBA interface is important because normally chemical, geochemical, and mineralogical data used in teaching and basic research are processed using Excel spreadsheets, making TerCharts a more convenient tool for generating ternary charts which in turn can be used for data presentation and analysis. Ternary charts generated by this utility can be improved, edited, and modified utilizing MS Excel’s powerful charting and editing techniques.

  13. MINIMIZING GLOVEBOX GLOVE BREACHES, PART IV: CONTROL CHARTS

    International Nuclear Information System (INIS)

    At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium. isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebo gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program (GGIP) was developed to minimize and/or prevent unplanned openings in the glovebox environment, i.e., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation detennine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

  14. Minimizing glovebox glove breaches, Part 4: control charts

    International Nuclear Information System (INIS)

    At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebox gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program was developed to minimize and/or prevent unplanned openings in the glovebox environment, e.g., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation determine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations. (authors)

  15. MINIMIZING GLOVEBOX GLOVE BREACHES, PART IV: CONTROL CHARTS

    Energy Technology Data Exchange (ETDEWEB)

    COURNOYER, MICHAEL E. [Los Alamos National Laboratory; LEE, MICHELLE B. [Los Alamos National Laboratory; SCHREIBER, STEPHEN B. [Los Alamos National Laboratory

    2007-02-05

    At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium. isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebo gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program (GGIP) was developed to minimize and/or prevent unplanned openings in the glovebox environment, i.e., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation detennine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

  16. Emerging Definition of Next-Generation of Aeronautical Communications

    Science.gov (United States)

    Kerczewski, Robert J.

    2006-01-01

    Aviation continues to experience rapid growth. In regions such as the United States and Europe air traffic congestion is constraining operations, leading to major new efforts to develop methodologies and infrastructures to enable continued aviation growth through transformational air traffic management systems. Such a transformation requires better communications linking airborne and ground-based elements. Technologies for next-generation communications, the required capacities, frequency spectrum of operation, network interconnectivity, and global interoperability are now receiving increased attention. A number of major planning and development efforts have taken place or are in process now to define the transformed airspace of the future. These activities include government and industry led efforts in the United States and Europe, and by international organizations. This paper will review the features, approaches, and activities of several representative planning and development efforts, and identify the emerging global consensus on requirements of next generation aeronautical communications systems for air traffic control.

  17. TRENDS: The aeronautical post-test database management system

    Science.gov (United States)

    Bjorkman, W. S.; Bondi, M. J.

    1990-01-01

    TRENDS, an engineering-test database operating system developed by NASA to support rotorcraft flight tests, is described. Capabilities and characteristics of the system are presented, with examples of its use in recalling and analyzing rotorcraft flight-test data from a TRENDS database. The importance of system user-friendliness in gaining users' acceptance is stressed, as is the importance of integrating supporting narrative data with numerical data in engineering-test databases. Considerations relevant to the creation and maintenance of flight-test database are discussed and TRENDS' solutions to database management problems are described. Requirements, constraints, and other considerations which led to the system's configuration are discussed and some of the lessons learned during TRENDS' development are presented. Potential applications of TRENDS to a wide range of aeronautical and other engineering tests are identified.

  18. Applied simulation and optimization in logistics, industrial and aeronautical practice

    CERN Document Server

    Mota, Idalia; Serrano, Daniel

    2015-01-01

    Presenting techniques, case-studies and methodologies that combine the use of simulation approaches with optimization techniques for facing problems in manufacturing, logistics, or aeronautical problems, this book provides solutions to common industrial problems in several fields, which range from manufacturing to aviation problems, where the common denominator is the combination of simulation’s flexibility with optimization techniques’ robustness. Providing readers with a comprehensive guide to tackle similar issues in industrial environments, this text explores novel ways to face industrial problems through hybrid approaches (simulation-optimization) that benefit from the advantages of both paradigms, in order to give solutions to important problems in service industry, production processes, or supply chains, such as scheduling, routing problems and resource allocations, among others.

  19. Aeronautical Mobile Airport Communications System (AeroMACS)

    Science.gov (United States)

    Budinger, James M.; Hall, Edward

    2011-01-01

    To help increase the capacity and efficiency of the nation s airports, a secure wideband wireless communications system is proposed for use on the airport surface. This paper provides an overview of the research and development process for the Aeronautical Mobile Airport Communications System (AeroMACS). AeroMACS is based on a specific commercial profile of the Institute of Electrical and Electronics Engineers (IEEE) 802.16 standard known as Wireless Worldwide Interoperability for Microwave Access or WiMAX (WiMax Forum). The paper includes background on the need for global interoperability in air/ground data communications, describes potential AeroMACS applications, addresses allocated frequency spectrum constraints, summarizes the international standardization process, and provides findings and recommendations from the world s first AeroMACS prototype implemented in Cleveland, Ohio, USA.

  20. Health monitoring of aeronautical structures based on vibrations measurements

    Science.gov (United States)

    Bovio, Igor; Lecce, Leonardo

    2006-03-01

    Purpose of the paper is to present an innovative application inside the Non Destructive Testing field based on vibrations measurements, developed by the authors during the last three years, and already tested for analysing damage of many structural elements. The proposed new method is based on the acquisition and comparison of Frequency Response Functions (FRFs) of the monitored structure before and after an occurred damage. Structural damage modify the dynamical behaviour of the structure such as mass, stiffened and damping, and consequently the FRFs of the damaged structure in comparison with the FRFs of the sound structure, making possible to identify, to localize and quantify a structural damage. The activities, presented in the paper, mostly focused on a new FRFs processing technique based on the determining of a representative "Damage Index" for identifying and analysing damage both on real scale aeronautical structural components, like large-scale fuselage reinforced panels, and on aeronautical composite panels. Besides it has been carried out a dedicated neural network algorithm aiming at obtaining a "recognition-based learning"; this kind of learning methodology permits to train the neural network in order to let it recognises only "positive" examples discarding as a consequence the "negative" ones. Within the structural NDT a "positive" example means "healthy" state of the analysed structural component and, obviously, a "negative" one means a "damaged" or perturbed state. From an architectural point of view piezoceramic patches have been tested as actuators and sensors. Besides it has been used a laser-scanning vibrometer system to validate the behaviour of the piezoceramic patches.

  1. A Variable Sampling Interval Synthetic Xbar Chart for the Process Mean.

    Directory of Open Access Journals (Sweden)

    Lei Yong Lee

    Full Text Available The usual practice of using a control chart to monitor a process is to take samples from the process with fixed sampling interval (FSI. In this paper, a synthetic X control chart with the variable sampling interval (VSI feature is proposed for monitoring changes in the process mean. The VSI synthetic X chart integrates the VSI X chart and the VSI conforming run length (CRL chart. The proposed VSI synthetic X chart is evaluated using the average time to signal (ATS criterion. The optimal charting parameters of the proposed chart are obtained by minimizing the out-of-control ATS for a desired shift. Comparisons between the VSI synthetic X chart and the existing X, synthetic X, VSI X and EWMA X charts, in terms of ATS, are made. The ATS results show that the VSI synthetic X chart outperforms the other X type charts for detecting moderate and large shifts. An illustrative example is also presented to explain the application of the VSI synthetic X chart.

  2. 56-Day Complete Set of all of the Digital Enroute Charts

    Data.gov (United States)

    Department of Transportation — The following ZIP files contain all of the Digital Enroute charts, except for Caribbean charts, for a given effective date range. Due to the large file sizes, it is...

  3. Control of routine radioimmunoassays: a computer program for calculation of control charts for precision and accuracy

    International Nuclear Information System (INIS)

    A computer program is proposed allowing the automatic calculation of control charts for accuracy and precision. The calculated charts enable the analyst to control easily the daily results for a determined radioimmunoassay. (Auth.)

  4. [A treatment chart adapted to the arch form].

    Science.gov (United States)

    Bocquet-Moreau, E; Danguy, Ch; Bertrand, J; Danguy, M

    2005-12-01

    Arch wires used in orthodontic treatment must conform to the shape of the dental arches so that in their final positions teeth will be set in a pathway of neuromuscular equilibrium. However, sometimes distortions of the alveoli deform the shape of the arch. In such cases the treatment charts constructed on the actual alveolo-dental relationship will not reflect desired objectives. We believe that the transverse muco-gingival dimension Andrews called the Wala line responds better to therapeutic requirements. Moreover, molar attachments, key elements of a full-banded appliance, are in harmony with it. So the type of chart that the authors propose for use with the Straight Wire technique, one based on the Wala line, will help orthodontists place teeth at the conclusion of orthodontic treatment in the best possible relationships to patients' specific anatomic configurations. PMID:16471375

  5. Stability Analysis and Stability Chart for Unsaturated Residual Soil Slope

    Directory of Open Access Journals (Sweden)

    Bugang B.K. Haut

    2006-01-01

    Full Text Available In tropical residual soils most hill slope failures are caused by rainfall. It is therefore important to consider dynamic hydrological conditions when attempting to analyze the stability of residual soil slopes. This paper describes a coupled hydrology/stability model that has been developed to overcome the limitations of the standard method of analysis used to investigate stability of tropical soil slopes. A computational hydrology – limit equilibrium stability analysis model is outlined and examples are provided of the model output capabilities in terms of design charts. Although nowadays most realistic problem should be analyzed by computer and stability charts are mainly used to analyze simple slopes, they can be useful for preliminary analysis and enable the designer to quickly assess the sensitivity of a problem to changes in different input parameters.

  6. Visualizing Library Statistics using Open Flash Chart 2 and Drupal

    Directory of Open Access Journals (Sweden)

    Laura K. Wiegand

    2013-01-01

    Full Text Available Libraries continue to need to demonstrate their value to stakeholders, and while statistics alone do not represent value, they are an important element. We found ourselves, and our stakeholders, uninspired by our infrequently updated bulleted list of statistics on our website and so set out to create a more dynamic and visually appealing look at our statistics. This article outlines how we used our content management system, Drupal, Open Flash Chart and custom programming to convert library statistics into Flash charts, including how to populate the graphs with dynamic data from external sources. The end result is our Library Statistics Dashboard (http://library.uncw.edu/facts_planning/dashboard that visually demonstrates the use, activity and resources in the library via interactive and visually interesting graphs.

  7. Evolving Chart Pattern Sensitive Neural Network Based Forex Trading Agents

    CERN Document Server

    Sher, Gene I

    2011-01-01

    Though machine learning has been applied to the foreign exchange market for quiet some time now, and neural networks have been shown to yield good results, in modern approaches neural network systems are optimized through the traditional methods, and their input signals are vectors containing prices and other indicator elements. The aim of this paper is twofold, the presentation and testing of the application of topology and weight evolving artificial neural network (TWEANN) systems to automated currency trading, and the use of chart images as input to a geometrical regularity aware indirectly encoded neural network systems. This paper presents the benchmark results of neural network based automated currency trading systems evolved using TWEANNs, and compares the generalization capabilities of these direct encoded neural networks which use the standard price vector inputs, and the indirect (substrate) encoded neural networks which use chart images as input. The TWEANN algorithm used to evolve these currency t...

  8. An Exponentially Weighted Moving Average Control Chart for Bernoulli Data

    DEFF Research Database (Denmark)

    Spliid, Henrik

    2010-01-01

    We consider a production process in which units are produced in a sequential manner. The units can, for example, be manufactured items or services, provided to clients. Each unit produced can be a failure with probability p or a success (non-failure) with probability (1-p). A novel exponentially ...... weighted moving average (EWMA) control chart intended for surveillance of the probability of failure, p, is described. The chart is based on counting the number of non-failures produced between failures in combination with a variance-stabilizing transformation. The distribution function...... are described and a practical example is given. It is demonstrated how the method communicates the current failure probability in a direct and interpretable way, which makes it well suited for surveillance of a great variety of activities in industry or in the service sector such as in hospitals, for example...

  9. Fault detection in electric power systems based on control charts

    OpenAIRE

    Kisić Emilija; Petrović Vera; Jakovljević Miroslav; Đurović Željko

    2013-01-01

    This paper analyzes the control system of the combustion process and protection from explosions in the boiler furnace of thermal power plant using the techniques of control charts. The data from old and newly introduced system for measuring under-pressure differences in boiler furnace at unit B2, TE Nikola Tesla (TENT) Obrenovac, were analyzed. The signal of undepressure difference is used for boiler protection function in thermal power plant TENT B. The results that confirm the advanta...

  10. Observing rapid quasi-wave ionospheric disturbance using amplitude charts

    Science.gov (United States)

    Kurkin, Vladimir; Laryunin, Oleg; Podlesnyi, Alexey

    Data from vertical (quasi-vertical) sounding are traditionally used for determining a number of ionospheric parameters such as critical frequencies of E and F layers, peaks of these layers, and for reconstructing electron density profiles. In this respect, radio sounding is not used to its full capacity. Modern ionosondes provide additional information encoded in ionospheric echoes, including information on reflected-signal amplitude. The time dependence of the amplitude-frequency characteristic of reflected signal has been named "amplitude chart" (A-chart). Ionosondes used by the ISTP SB RAS Geophysical Observatory for constructing A-charts employ the frequency-modulated continuous-wave (FMCW) signal in a range 1.3-15 MHz. One-minute sounding interval allows a more detailed study of dynamic processes in the ionosphere. The ionosonde has a direct digital synthesizer and direct sampling receiver without automatic gain control (AGC). The absence of AGC and the high dynamic range enable determination of the relative field strength at a receiving point and registration of relative long-term variations in reflected-signal amplitude over the entire range of operating frequencies of the ionosonde. We have revealed that the passage of travelling ionospheric disturbances (TID) along with height-frequency distortion modulates amplitude characteristics of signal. The characteristic depth of the modulation reaches 40 dB. The pronounced alternate vertical stripes typical for A-charts are likely to be associated with focusing properties of TID. In order to examine the space-time structure of TID able to induce such a focusing of the radio waves, we performed ray tracing simulations. We used geometrical-optics approximation, took magneto-ionic effects into account and prescribed electron density to be a stratified electron density profile on which an undulating disturbance was superimposed. This work was supported by the RFBR grant №14-05-00259-а.

  11. Depreciation accounting in the uniform chart of accounts.

    OpenAIRE

    George, Charles Lee

    1982-01-01

    Approved for public release; distribution is unlimited This paper examines depreciation's contribution to the total cost of providing health care. In particular it analyzes the depreciation method used to measure the consumption of health care resources, the validity of the depreciation process and the subsequent allocation procedures. As defined by the Uniform Chart of Accounts, the usefulness of depreciation in determining the total cost of providing health care is atte...

  12. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    Yi DAI; Zhao-jun WANG; Chang-liang ZOU

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method.Sullivan and woodall pointed out the test statistic lrt (n1, n2) is approximately distributed as x2 (2) as the sample size n, n1 and n2 are very large, and the value of n1 = 2, 3,..., n- 2 and that of n2 = n- n1.So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained.In addition, the properties of the standardized likelihood ratio statistic slr(n1,n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i ≠ n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both.Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  13. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method. Sullivan and woodall pointed out the test statistic lrt(n1, n2) is approximately distributed as x2(2) as the sample size n,n1 and n2 are very large, and the value of n1 = 2,3,..., n - 2 and that of n2 = n - n1. So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained. In addition, the properties of the standardized likelihood ratio statistic slr(n1, n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i≠n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both. Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  14. The construction of control chart for PM10 functional data

    Science.gov (United States)

    Shaadan, Norshahida; Jemain, Abdul Aziz; Deni, Sayang Mohd

    2014-06-01

    In this paper, a statistical procedure to construct a control chart for monitoring air quality (PM10) using functional data is proposed. A set of daily indices that represent the daily PM10 curves were obtained using Functional Principal Component Analysis (FPCA). By means of an iterative charting procedure, a reference data set that represented a stable PM10 process was obtained. The data were then used as a reference for monitoring future data. The application of the procedure was conducted using seven-year (2004-2010) period of recorded data from the Klang air quality monitoring station located in the Klang Valley region of Peninsular Malaysia. The study showed that the control chart provided a useful visualization tool for monitoring air quality and was capable in detecting abnormality in the process system. As in the case of Klang station, the results showed that with reference to 2004-2008, the air quality (PM10) in 2010 was better than that in 2009.

  15. Three-Dimensional Nuclear Chart--Understanding Nuclear Physics and Nucleosynthesis in Stars

    Science.gov (United States)

    Koura, Hiroyuki

    2014-01-01

    Three-dimensional (3D) nuclear charts were created using toy blocks, which represent the atomic masses per nucleon number and the total half-lives for each nucleus in the entire region of the nuclear mass. The bulk properties of the nuclei can be easily understood by using these charts. Subsequently, these charts were used in outreach activities…

  16. Comparison of Applicability of Different Visual Acuity Charts for Pediatric Outpatient Visual Tests

    Institute of Scientific and Technical Information of China (English)

    Haili Fang; Hongxing Diao; Linxing Chen; Junwen Zeng

    2014-01-01

    Purpose: To evaluate the applicability of different visual acu-ity charts for outpatient pediatric visual tests. Methods: Fifty-three children (53 eyes) aged 4-8 years un-dergoing visual acuity tests as outpatients were randomly se-lected for this study. The best corrected visual acuity (BCVA) of the eye with better visual acuity was measured for each child using the digital LogMAR visual chart,.the ETDRS vi-sual chart,.and a new standard logarithm visual chart;.all measurements were repeated twice and the BCVA was record-ed. Paired comparisons were made between the LogMAR vi-sual acuity chart and ETDRS chart measurements or between the ETDRS chart and logarithm visual acuity chart measure-ments for statistical analysis of the differences in measurement of visual acuity..The results of different measurements by the same chart were compared to evaluate the consistency of the measurement results..Bland-Altman analysis was employed to evaluate the most suitable chart for outpatient measurement of visual acuity in children. Results:.Bland-Altman analysis revealed that the mean visual acuity measured was. (0.447 ±0.017 LogMAR).by the digital LogMAR chart,.(0.301±0.024 LogMAR).by the standard log-arithm visual acuity chart, and (0.309 ±0.018 LogMAR) by the ETDRS visual acuity chart. The BCVA was significantly lower when measured by the LogMAR visual acuity chart than by the ETDRS chart (P0.05)..The Bland-Altman plot showed that the high-est consistency was obtained with the digital LogMAR chart, with a difference between two repeated measurements of 0.068 LogMAR,.compared to 0.090 and 0.072 LogMAR for the logarithm and ETDRS visual acuity charts, respectively. Conclusion: All three types of visual acuity charts are appli-cable for outpatient measurement of pediatric visual acuity. The ETDRS and logarithm visual acuity charts have a higher consistency, but the LogMAR visual acuity chart shows better reproducibility..Consequently,.it is difficult to identify and

  17. Modeling Spacecraft Fuel Slosh at Embry-Riddle Aeronautical University

    Science.gov (United States)

    Schlee, Keith L.

    2007-01-01

    As a NASA-sponsored GSRP Fellow, I worked with other researchers and analysts at Embry-Riddle Aeronautical University and NASA's ELV Division to investigate the effect of spacecraft fuel slosh. NASA's research into the effects of fuel slosh includes modeling the response in full-sized tanks using equipment such as the Spinning Slosh Test Rig (SSTR), located at Southwest Research Institute (SwRI). NASA and SwRI engineers analyze data taken from SSTR runs and hand-derive equations of motion to identify model parameters and characterize the sloshing motion. With guidance from my faculty advisor, Dr. Sathya Gangadharan, and NASA flight controls analysts James Sudermann and Charles Walker, I set out to automate this parameter identification process by building a simple physical experimental setup to model free surface slosh in a spherical tank with a simple pendulum analog. This setup was then modeled using Simulink and SimMechanics. The Simulink Parameter Estimation Tool was then used to identify the model parameters.

  18. Calculations of reactive turbulent flows in aeronautical chambers

    Science.gov (United States)

    Caillau, P.; Dupoirieux, F.

    1993-02-01

    The progress which was recently achieved in the modeling of turbulent combustion for applications to propulsion are described. The averaged equations of reactive turbulent flows are given, then the Probabilist EUlerian Langrangian model (PEUL) intended for the calculation of the average source terms of categories and of enthalpy are presented. The possibility of taking into account by this model the reactional mechanisms to several categories is applied to the prediction of the pollutants and in particular to the calculation of thermal NO. In order to obtain the best possible prediction of the chemical composition and the temperature, three total mechanisms of oxidation of methane are successively coupled with the PEUL model and their results compared. Two applications are then studied. The first application is a premixed flame stabilized by a hot gas flow. The computation results are compared with the experimental results obtained with ONERA and present a suitable agreement, in particular with regard to the profiles of thermal NO. The second concerns a portion of an annular aeronautical chamber. The comparison of the average production rates obtained with a model of turbulent combustion with rapid chemistry and with the PEUL model highlights, in this case, the importance of not making the hypothesis of rapid chemistry.

  19. Crack path in aeronautical titanium alloy under ultrasonic torsion loading

    Directory of Open Access Journals (Sweden)

    A. Nikitin

    2016-01-01

    Full Text Available This paper discusses features of fatigue crack initiation and growth in aeronautical VT3-1 titanium alloy under pure torsion loading in gigacycle regime. Two materials: extruded and forged VT3-1 titanium alloys were studied. Torsion fatigue tests were performed up to fatigue life of 109 cycles. The results of the torsion tests were compared with previously obtained results under fully reversed axial loading on the same alloys. It has been shown that independently on production process as surface as well subsurface crack initiation may appear under ultrasonic torsion loading despite the maximum stress amplitude located at the specimen surface. In the case of surface crack initiation, a scenario of crack initiation and growth is similar to HCF regime except an additional possibility for internal crack branching. In the case of subsurface crack, the initiation site is located below the specimen surface (about 200 μm and is not clearly related to any material flaw. Internal crack initiation is produced by shear stress in maximum shear plane and early crack growth is in Mode II. Crack branching is limited in the case of internal crack initiation compared to surface one. A typical ‘fish-eye’ crack can be observed at the torsion fracture surface, but mechanism of crack initiation seems not to be the same than under axial fatigue loading.

  20. NDE for Material Characterization in Aeronautic and Space Applications

    Science.gov (United States)

    Baaklini, George Y.; Kautz, Harold E.; Gyekenyesi, Andrew L.; Abdul-Aziz, Ali; Martin, Richard E.

    2000-01-01

    This paper describes selected nondestructive evaluation (NDE) approaches that were developed or tailored at the NASA Glenn Research Center for characterizing advanced material systems. The emphasis is on high-temperature aerospace propulsion applications. The material systems include monolithic ceramics, superalloys, and high temperature composites. In the aeronautic area, the highlights are cooled ceramic plate structures for turbine applications, F-TiAl blade materials for low-pressure turbines, thermoelastic stress analysis (TSA) for residual stress measurements in titanium based and nickel based engine materials, and acousto ultrasonics (AU) for creep damage assessment in nickel-based alloys. In the space area, examples consist of cooled carbon-carbon composites for gas generator combustors and flywheel rotors composed of carbon fiber reinforced polymer matrix composites for energy storage on the international space station (ISS). The role of NDE in solving manufacturing problems, the effect of defects on structural behavior, and the use of NDE-based finite element modeling are discussed. NDE technology needs for improved microelectronic and mechanical systems as well as health monitoring of micro-materials and components are briefly discussed.

  1. An analysis of total quality management in Aeronautical Systems Division

    Science.gov (United States)

    Caudle, Mark D.

    1991-09-01

    This study investigated the major schools of thought on various aspects of quality management and quality improvement. Areas covered included definitions of waste and quality, views on the cost of quality, tools and techniques used for quality improvement, and management philosophies and frameworks for continuous improvement. In addition, this study analyzed the structure and training content of the current Total Quality Management program at Aeronautical Systems Division (ASD). Pre- and post-test surveys on employee attitudes toward organizational effectiveness were analyzed from the Advanced Cruise Missile System Program Office (SPO), the F-15 SPO, and the ASD Deputy Chief of Staff for Human Resources (ASD/DP). Data was supplemented with semi-structured, personal interviews with ASD personnel involved in TQM. Survey analysis showed that the ACM SPO significantly improved, ASD/DP significantly digressed, and the F-15 SPO remained basically consistent. This led to the conclusion that ASD allows too much flexibility in the implementation of TQM in the three-letter organizations.

  2. NASA Ames Sustainability Initiatives: Aeronautics, Space Exploration, and Sustainable Futures

    Science.gov (United States)

    Grymes, Rosalind A.

    2015-01-01

    In support of the mission-specific challenges of aeronautics and space exploration, NASA Ames produces a wealth of research and technology advancements with significant relevance to larger issues of planetary sustainability. NASA research on NexGen airspace solutions and its development of autonomous and intelligent technologies will revolutionize both the nation's air transporation systems and have applicability to the low altitude flight economy and to both air and ground transporation, more generally. NASA's understanding of the Earth as a complex of integrated systems contributes to humanity's perception of the sustainability of our home planet. Research at NASA Ames on closed environment life support systems produces directly applicable lessons on energy, water, and resource management in ground-based infrastructure. Moreover, every NASA campus is a 'city'; including an urbanscape and a workplace including scientists, human relations specialists, plumbers, engineers, facility managers, construction trades, transportation managers, software developers, leaders, financial planners, technologists, electricians, students, accountants, and even lawyers. NASA is applying the lessons of our mission-related activities to our urbanscapes and infrastructure, and also anticipates a leadership role in developing future environments for living and working in space.

  3. Time contour expression of limited range phenomena on stack chart; Jugo chart jo deno kyokuchi gensho jikan contour

    Energy Technology Data Exchange (ETDEWEB)

    Kametani, T.

    1997-05-27

    Time contour expression of limited range phenomena on stack chart is examined for further improvement on the result of the ultimate interpretation in the seismic reflection survey. The policy is made clear from the beginning that local phenomena are to be discussed, and data prior CMP stacking is interpreted in detail. For this purpose, it is effective to make use of the time contour expression in the midpoint-offset plane simultaneously with the CMP and COP panels. For the review of data prior to CMP stacking, it is convenient to use the CMP (CDP) stacking chart in which the data is arranged methodically. In this chart, all the channels which are crude data prior to stacking are plotted on midpoint-offset coordinates, which plane is called the MOD (Midpoint Offset Domain) panel. Various panels can be chosen unrestrictedly, and their mutual relations can be easily grasped. When data points are given a time axis, they can be expressed in a time contour. Studies are conducted about the underground structure, multiple reflection paths divided by it, and characteristics of detour reflection attributable to faults. 4 refs., 9 figs.

  4. Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

    2003-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

  5. IPv6 Test Bed for Testing Aeronautical Applications

    Science.gov (United States)

    Wilkins, Ryan; Zernic, Michael; Dhas, Chris

    2004-01-01

    Aviation industries in United States and in Europe are undergoing a major paradigm shift in the introduction of new network technologies. In the US, NASA is also actively investigating the feasibility of IPv6 based networks for the aviation needs of the United States. In Europe, the Eurocontrol lead, Internet Protocol for Aviation Exchange (iPAX) Working Group is actively investigating the various ways of migrating the aviation authorities backbone infrastructure from X.25 based networks to an IPv6 based network. For the last 15 years, the global aviation community has pursued the development and implementation of an industry-specific set of communications standards known as the Aeronautical Telecommunications Network (ATN). These standards are now beginning to affect the emerging military Global Air Traffic Management (GATM) community as well as the commercial air transport community. Efforts are continuing to gain a full understanding of the differences and similarities between ATN and Internet architectures as related to Communications, Navigation, and Surveillance (CNS) infrastructure choices. This research paper describes the implementation of the IPv6 test bed at NASA GRC, and Computer Networks & Software, Inc. and these two test beds are interface to Eurocontrol over the IPv4 Internet. This research work looks into the possibility of providing QoS performance for Aviation application in an IPv6 network as is provided in an ATN based network. The test bed consists of three autonomous systems. The autonomous system represents CNS domain, NASA domain and a EUROCONTROL domain. The primary mode of connection between CNS IPv6 testbed and NASA and EUROCONTROL IPv6 testbed is initially a set of IPv6 over IPv4 tunnels. The aviation application under test (CPDLC) consists of two processes running on different IPv6 enabled machines.

  6. Liquid polyimide as a substrate for aeronautical sensor systems

    Science.gov (United States)

    Schwerter, Martin; Hecht, Lars; Koch, Eugen Viktor; Leester-Schädel, Monika; Büttgenbach, Stephanus; Dietzel, Andreas

    2015-03-01

    Using more and more controlled systems in future aircraft the need of flexible sensors to be applied on curved aircraft structures increases. An appropriate substrate material for such flexible sensors is polyimide, which is available both as ready-made foil and as liquid polyimide to be spun-on. Latest results in producing and processing of polyimide layers with a thickness of down to 1 μm including designs for thin foil sensors are presented respectively. The successful processing of liquid polyimide is outlined first including the spin-on procedure, soft bake and curing for polymerization. Parameters for spin-on volume and rotation speed on glass substrates along with a comparison with ordinary polyimide foil are presented. High-precision structuring of the polyimide layer is performed either by etching (wet-etching as well as dry etching in a barrel etcher) or ablative removal using a femtosecond laser. In combination with a layer of silicon nitride as an inorganic diffusion barrier a reliable protection for water tunnel experiments can be realized. The fabrication of a protection layer and test results in water with protected sensors are presented. The design of a hot-film anemometric sensor array made on spin-on polyimide is demonstrated. With a thickness of down to 7 μm the sensors can be applied on the surface of wind tunnel models and water tunnel models without impacting the flow substantially. Additionally both the concept and recent results of a silicon sensor integrated in a polyimide foil substrate that can measure pressure as a complementary measurand for aeronautics are illustrated.

  7. Development of a fetal weight chart using serial trans-abdominal ultrasound in an East African population

    DEFF Research Database (Denmark)

    Schmiegelow, Christentze; Scheike, Thomas Harder; Oesterholt, Mayke;

    2012-01-01

    Objective: To produce a fetal weight chart representative of a Tanzanian population, and compare it to weight charts from Sub-Saharan Africa and the developed world. Methods: A longitudinal observational study in Northeastern Tanzania. Pregnant women were followed throughout pregnancy with serial...... trans-abdominal ultrasound. All pregnancies with pathology were excluded and a chart representing the optimal growth potential was developed using fetal weights and birth weights. The weight chart was compared to a chart from Congo, a chart representing a white population, and a chart representing a...... white population but adapted to the study population. The prevalence of SGA was assessed using all four charts. Results: A total of 2193 weight measurements from 583 fetuses/newborns were included in the fetal weight chart. Our chart had lower percentiles than all the other charts. Most importantly, in...

  8. Chart Venture Partners' perspective on dual-use CBRNE technologies

    Science.gov (United States)

    Van Nice, C. S.; Gardner, P. J.

    2008-04-01

    Chart Venture Partners' (CVP) approach to investing in Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) detection technologies can be best understood in the context of the unique partnership between the firm's two founding institutions. CVP was founded as a partnership between the Chart Group, a New York-based merchant banking and venture capital boutique, and InSitech Incorporated, a 501(c)(3) non-profit commercial partnership intermediary for the U.S. Army's Armament Research Development and Engineering Center (ARDEC) at Picatinny Arsenal in New Jersey. The partnership between Chart Group and Insitech has yielded a new investment model. Unlike most venture funds, CVP operates with a singular focus on early-stage defense and security technologies, with the important caveat that everything we invest in must also have dual-use application in large-scale commercial markets. CVP believes that early-stage CBRNE companies require five qualities to be viable investment candidates and successful start-up companies: Great Science, Strong IP Positions, Recognized Scientific Champions, Identified Dual-Use Market Pull, and "Real World" Technical Performance Data. When earlystage CBRNE companies decide to seek venture capital and pursue higher growth dual-use business models, we often find that certain issues arise that are not always fully contemplated at the outset, and that can create gaps between what the start-up companies are offering to investors and what those investors are seeking from their potential portfolio companies. These same issues can have significant positive or negative impact on shareholder value over time, depending on how they are managed. Specifically, startups should consider carefully their strategies related to business development, market positioning, government funding, and investment syndicate formation.

  9. Applying corrections to digitized data while digitizing magnetic chart

    Digital Repository Service at National Institute of Oceanography (India)

    Suresh, T.

    the data value covers the full-scale value on the Y axis, there is a jump to the initial position either at the bottom or the top of the chart and the recording continues. The effective or final value is calculated with res- pect to the last magnetic... increasing data value. Thus with the help of slope of the data and the direction of paper movement, the effective value of data from digitized value can be obtained. But determining the value of magnetic data by calculating the slope for every digitized...

  10. Use of national and international growth charts for studying height in European children: development of up-to-date European height-for-age charts.

    Directory of Open Access Journals (Sweden)

    Marjolein Bonthuis

    Full Text Available BACKGROUND: Growth charts based on data collected in different populations and time periods are key tools to assess children's linear growth. We analyzed the impact of geographic factors and the secular trend on height-for-age charts currently used in European populations, developed up-to-date European growth charts, and studied the effect of using different charts in a sample of growth retarded children. METHODS AND FINDINGS: In an international survey we obtained 18 unique national height-for-age charts from 28 European countries and compared them with charts from the World Health Organization (WHO, Euro-Growth reference, and Centers of Disease Control and Prevention (CDC. As an example, we obtained height data from 3,534 children with end-stage renal disease (ESRD from 13 countries via the ESPN/ERA-EDTA registry, a patient group generally suffering from growth retardation. National growth charts showed a clear secular trend in height (mean height increased on average 0.6 cm/decade and a North-South height gradient in Europe. For countries without a recent (>1990 national growth chart novel European growth charts were constructed from Northern and Southern European reference populations, reflecting geographic height differences in mean final height of 3.9 cm in boys and 3.8 cm in girls. Mean height SDS of 2- to 17-year-old ESRD patients calculated from recent national or derived European growth charts (-1.91, 95% CI: -1.97 to -1.85 was significantly lower than when using CDC or WHO growth charts (-1.55, 95% CI: -1.61 to -1.49 (P<0.0001. CONCLUSION: Differences between height-for-age charts may reflect true population differences, but are also strongly affected by the secular trend in height. The choice of reference charts substantially affects the clinical decision whether a child is considered short-for-age. Therefore, we advocate using recent national or European height-for-age charts derived from recent national data when monitoring growth

  11. The Aeronautics Education, Research, and Industry Alliance (AERIAL) 2002 Report. UNO Aviation Monograph Series. UNOAI Report.

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; O'Neil, Patrick D.; Tarry, Scott E.; Vlasek, Karisa D.

    This document contains four papers on aeronautics education, research, and partnerships that partly supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL). The paper "2002 AERIAL Monograph" (Brent D. Bowen, Jocelyn S. Nickerson, Mary M. Fink, et al.) presents an overview of research and development in the following…

  12. Sectoral Innovation Performance in the Space and Aeronautics Sectors. final report. Task 1

    NARCIS (Netherlands)

    Giessen, A.M. van der; Poel, M.

    2011-01-01

    The Space and Aeronautics Sectors are high tech manufacturing sectors. Between Space and Aeronautics Sectors are linkages and parallels. All major systems assemblers are active in both sectors. Examples are EADS but also Boeing, BAE Systems and manufacturers of propulsion systems and other component

  13. 78 FR 22595 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-04-16

    ... Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999 (64 FR 7696... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... land-use assurance that requires the property to be used for an aeronautical purpose. The subject...

  14. 78 FR 79059 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-12-27

    ... the Use of Airport Revenue, published in the Federal Register on February 16, 1999 (64 FR 7696). This... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... assurance that requires the property to be used for an aeronautical purpose. The property was...

  15. 78 FR 63279 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-10-23

    ... the Use of Airport Revenue, published in the Federal Register on February 16, 1999 (64 FR 7696... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... before modifying the land-use assurance that requires the property to be used for an aeronautical...

  16. 78 FR 41823 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-07-11

    ... FR 7696). Parcel 108: A parcel of land being part of the Southeast Quarter of the Northeast Quarter... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... assurance that requires the property to be used for an aeronautical purpose. The two parcels proposed to...

  17. 78 FR 59753 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-09-27

    ... Register on February 16, 1999 (64 FR 7696). This notice announces that the FAA is considering the release... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... land-use assurance that requires the property to be used for an aeronautical purpose. The property...

  18. 78 FR 41822 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-07-11

    ... in the Federal Register on February 16, 1999 (64 FR 7696). Property Description: within Section 12... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... assurance that requires the property to be used for an aeronautical purpose. The property was acquired...

  19. 76 FR 6827 - Public Availability of the National Aeronautic and Space Administration FY 2010 Service Contract...

    Science.gov (United States)

    2011-02-08

    ... SPACE ADMINISTRATION Public Availability of the National Aeronautic and Space Administration FY 2010 Service Contract Inventory AGENCY: National Aeronautic and Space Administration. ACTION: Notice of public... Administration (NASA) is publishing this notice to advise the public of the availability of its FY 2010...

  20. 78 FR 13383 - Public Availability of the National Aeronautics and Space Administration FY 2012 Service Contract...

    Science.gov (United States)

    2013-02-27

    ... SPACE ADMINISTRATION Public Availability of the National Aeronautics and Space Administration FY 2012... Administration. ACTION: Notice of Public Availability of the FY 2012 Service Contract Inventory, PSC codes... National Aeronautics and Space Administration (NASA) is publishing this notice to advise the public of...

  1. Nuclide Guide and International Chart of Nuclides - 2008

    Science.gov (United States)

    Golashvili, T.

    2009-08-01

    New versions of Nuclide Guide and Chart of the Nuclides were developed as a result of Russian-Chinese collaboration. The Nuclide Guide contains the basic information on more than 3000 radioactive and stable nuclides. The characteristics of isomers with half-lives more than 1 ms are included. For each nuclide spin, parity, mass of nuclide, magnetic moment (if available), mass excess, half-life or abundance, decay modes, branching ratios, emitted particles, energies of most intense gamma-rays and their intensities, decay energies and mean values of radiation energy per decay are given. For stable and natural long-lived nuclides cross-sections of thermal neutron induced activation are indicated. The information presented in the Guide was compiled from 5 sources: 1) ENSDF-2008, 2) atomic mass evaluation-2005 by Audi and Wapstra, 3) interactive data bases at web-sites , , 4) original evaluations of authors, 5) recent publications. The International Chart ot Nuclides was developed on the basis of information presented in Nuclide Guide.

  2. The Design of Solar Synoptic Chart for Space Weather Forecast

    Science.gov (United States)

    Song, Qiao; Wang, JinSong; Feng, Xueshang; Zhang, XiaoXin

    2015-08-01

    The influence of space weather has already been an important part of our modern society. A chart with key concepts and objects in space weather is needed for space weather forecast. In this work, we search space weather liter- atures during the past forty years and investigate a variety of solar data sets, which including our own data observed by the vector magnetic field telescope and the Hα telescope at Wenquan and Shidao stations of National Center for Space Weather. Based on the literatures and data, we design the solar synoptic chart (SSC) that covers main objects of solar activities and contains images from different heights and temperatures of solar atmosphere. The SSC includes the information of active regions, coronal holes, filaments/prominences, flares and coronal mass ejections, and reveals magnetic structures from cooler photosphere to hotter corona. We use the SSC method to analyze the condition of the Sun and give two typical examples of the SSC. The result shows that the SSC is timely, comprehensive, concise and easy to understand, and it meets the needs of space weather forecast and can help improving the public education of space weather.

  3. Terminal Procedures Publication/Airport Diagrams - Aeronautical Information Services Digital Products

    Data.gov (United States)

    Department of Transportation — The U.S. Terminal Procedure Publications (TPPs) is a 26 volume set of printed paper books containing Instrument Approach Procedure charts (IAP), Departure Procedure...

  4. Validation of Hoek-Brown failure criterion charts for rock slopes

    Institute of Scientific and Technical Information of China (English)

    A.M. Nekouei; K. Ahangari

    2013-01-01

    Although stability charts suggested by Hoek and Bray on the basis of Mohr-Coulomb criterion are used for rock slopes, but complete and precise recognition is required for distinguishing cohesive strength and Mohr-Coulomb equivalent internal friction angle for rock mass. The paper by Lia et al. [6] is the only one that introduced rock slope charts according to Hoek-Brown failure criterion. In this paper, at first, this type of charts is introduced. Then, Mohr-Coulomb failure criterion charts [2] are compared and validated with Hoek-Brown failure criterion ones [6]. Next, Bishop method utilizing Slide software is compared with Hoek-Brown failure criterion stability charts. Average standard deviation (ASD), root mean square error (RMSE) and variance account for (VAF) were used for the comparison. According to the results, because of high distribution and very low correlation among the comparisons, Hoek-Brown failure crite-rion charts are not efficient.

  5. Aeronautics. An Educator's Guide with Activities in Science, Mathematics, and Technology Education: What Pilot, Astronaut, or Aeronautical Engineer didn't Start out with a Toy Glider?

    Science.gov (United States)

    Biggs, Pat (Editor); Huetter, Ted (Editor)

    1998-01-01

    Welcome to the exciting world of aeronautics. The term aeronautics originated in France, and was derived from the Greek words for "air" and "to sail." It is the study of flight and the operation of aircraft. This educator guide explains basic aeronautical concepts, provides a background in the history of aviation, and sets them within the context of the flight environment (atmosphere, airports, and navigation). The activities in this guide are designed to be uncomplicated and fun. They have been developed by NASA Aerospace Education Services Program specialists, who have successfully used them in countless workshops and student programs around the United States. The activities encourage students to explore the nature of flight, and experience some real-life applications of mathematics, science, and technology. The subject of flight has a wonderful power to inspire learning.

  6. Utilisation of CryoSat-2 SAR altimeter in operational ice charting

    OpenAIRE

    E. Rinne; Similä, M.

    2016-01-01

    We present methods to utilise CryoSat-2 (CS-2) synthetic aperture radar (SAR) mode data in operational ice charting. We compare CS-2 data qualitatively to SAR mosaics over the Barents and Kara seas. Furthermore, we compare the CS-2 to archived operational ice charts. We present distributions of four CS-2 waveform parameters for different ice types as presented in the ice charts. We go on to present an automatic classification method for CS-2 data which, after training wit...

  7. Designing business charts with Excel based on the standards of HICHERT

    CERN Document Server

    Gerths, Holger

    2014-01-01

    This e-book offers a comprehensive range of knowledge for creating professional business charts based on the concept of HICHERT®SUCCESS. Given this knowledge, the SUCCESS rules of designing good business charts can be followed easily. This training is based on one complex example. The tips and trick learned can be transferred to other Excel chart types easily. Contents: Introduction to the HICHERT®SUCCESS design rules.Tips and tricks for Excel 2003 and 2007/2010.Comprehensive trai

  8. Simple Acupoints Prescription Flow Chart Based on Meridian Theory: A Retrospective Study in 102 Dogs

    OpenAIRE

    Jong-Ho Jeong; Joo-Young Song; Hyo-Gwon Jo; Ji-Min Kim; Samuel-S. Yoon; Chul Park; Seunghyun Kim; Seong-Soo Roh; Bong Hyo Lee; Chae Ha Yang; Hee Young Kim

    2013-01-01

    To help the clinicians prescribe acupoints easily and effectively, we developed one simple flow chart to select acupoints. This study aimed to evaluate the usefulness of flow chart to select acupoints in dogs. Total 102 dogs showing intervertebral disc disease (IVDD) (n = 12), vomiting (n = 11), diarrhea (n = 2), abdominal pain (n = 5), cough (n = 66), or epilepsy (n = 6) received acupuncture treatment according to the chart, and its outcomes were evaluated as regards clinical symptoms, durat...

  9. Design of inspection and maintenance models based on the CCC-chart

    OpenAIRE

    Chan, LY

    2003-01-01

    In this research, six maintenance models are constructed based on whether minor inspection, major inspection, minor maintenance and major maintenance are performed on a system. The system to study is a production process in which items produced can be classified as either conforming or nonconforming, and a statistical process control chart called CCC-chart (cumulative count control chart) can be applied to monitor the process. The maintenance models are analyzed quantitatively, and selection ...

  10. Knowledge Visualization: A Comparative Study between Project Tube Maps and Gantt Charts

    OpenAIRE

    Burkhard, Remo Aslak; Meier, Michael; Rodgers, Peter; Smis, Matthias T. J.; Stott, Jonathan

    2005-01-01

    This paper compares the effectiveness of the Project Tube Map and the Gantt Chart for interfunctional communication in large projects where different stakeholders are involved. Today, Gantt Charts are well known in project management. However, the use of Gantt Charts has limitations: It fails in motivational aspects, it has difficulties to illustrate who is collaborating with whom, and it supports badly recall. The Project Tube Map has been introduced earlier as an approach to overcome these ...

  11. Validation of life-charts documented with the personal life-chart app – a self-monitoring tool for bipolar disorder

    OpenAIRE

    Schärer, Lars O; Krienke, Ute J; Graf, Sandra-Mareike; Meltzer, Katharina; Langosch, Jens M

    2015-01-01

    Background Long-term monitoring in bipolar affective disorders constitutes an important therapeutic and preventive method. The present study examines the validity of the Personal Life-Chart App (PLC App), in both German and in English. This App is based on the National Institute of Mental Health’s Life-Chart Method, the de facto standard for long-term monitoring in the treatment of bipolar disorders. Methods Methods have largely been replicated from 2 previous Life-Chart studies. The particip...

  12. A Nonparametric Shewhart-Type Quality Control Chart for Monitoring Broad Changes in a Process Distribution

    Directory of Open Access Journals (Sweden)

    Saad T. Bakir

    2012-01-01

    Full Text Available This paper develops a distribution-free (or nonparametric Shewhart-type statistical quality control chart for detecting a broad change in the probability distribution of a process. The proposed chart is designed for grouped observations, and it requires the availability of a reference (or training sample of observations taken when the process was operating in-control. The charting statistic is a modified version of the two-sample Kolmogorov-Smirnov test statistic that allows the exact calculation of the conditional average run length using the binomial distribution. Unlike the traditional distribution-based control charts (such as the Shewhart X-Bar, the proposed chart maintains the same control limits and the in-control average run length over the class of all (symmetric or asymmetric continuous probability distributions. The proposed chart aims at monitoring a broad, rather than a one-parameter, change in a process distribution. Simulation studies show that the chart is more robust against increased skewness and/or outliers in the process output. Further, the proposed chart is shown to be more efficient than the Shewhart X-Bar chart when the underlying process distribution has tails heavier than those of the normal distribution.

  13. Illuminant spectrum estimation using a digital color camera and a color chart

    Science.gov (United States)

    Shi, Junsheng; Yu, Hongfei; Huang, Xiaoqiao; Chen, Zaiqing; Tai, Yonghang

    2014-10-01

    Illumination estimation is the main step in color constancy processing, also an important prerequisite for digital color image reproduction and many computer vision applications. In this paper, a method for estimating illuminant spectrum is investigated using a digital color camera and a color chart under the situation when the spectral reflectance of the chart is known. The method is based on measuring CIEXYZ of the chart using the camera. The first step of the method is to gain camera's color correction matrix and gamma values by taking a photo of the chart under a standard illuminant. The second step is to take a photo of the chart under an estimated illuminant, and the camera's inherent RGB values are converted to the standard sRGB values and further converted to CIEXYZ of the chart. Based on measured CIEXYZ and known spectral reflectance of the chart, the spectral power distribution (SPD) of the illuminant is estimated using the Wiener estimation and smoothing estimation. To evaluate the performance of the method quantitatively, the goodnessfitting coefficient (GFC) was used to measure the spectral match and the CIELAB color difference metric was used to evaluate the color match between color patches under the estimated and actual SPDs. The simulated experiment was carried to estimate CIE standard illuminant D50 and C using X-rite ColorChecker 24-color chart, the actual experiment was carried to estimate daylight and illuminant A using two consumergrade cameras and the chart, and the experiment results verified feasible of the investigated method.

  14. Translating Message Sequence Charts to other Process Languages using Process

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; van Dongen, Boudewijn F.

    2008-01-01

    stakeholders. Often such discussions lead to more complete behavioral models described by e.g. Event-driven Process Chains (EPCs), UML activity diagrams, BPMN models, Petri nets, etc. Process mining on the other hand, deals with the problem of constructing complete behavioral models by analyzing event logs....... This combination allows us to discover high-quality process models. To constructively add to the existing work on process mining, our approach has been implemented in the process mining framework ProM (www.processmining.org).......Message Sequence Charts (MSCs) are a well known language for speci- fying scenarios that describe how different actors (e.g., system components, people, or organizations) interact. MSCs are often used as a starting point for software analysts to discuss the behavior of a system with different...

  15. Dermatologic manifestation of hyperandrogenism: a retrospective chart review.

    Science.gov (United States)

    Clark, Charlotte M; Rudolph, Jennifer; Gerber, Donald A; Glick, Sharon; Shalita, Alan R; Lowenstein, Eve J

    2014-01-01

    Several studies have described a wide spectrum of hyperandrogenism diseases, many of which are difficult to distinguish from each other. In order to better understand diseases of hyperandrogenism, the authors performed a retrospective study of the cutaneous features and metabolic findings in women with hyperandrogenism. A retrospective chart analysis compiled by three dermatologists in both academic and private settings was performed, including patients presenting with > or = 2 manifestations of hyperandrogenism. Relevant dermatologic and associated manifestations and laboratory and imaging study findings were reviewed. Moderate to severe acne was the most common manifestation. Other common manifestations that patients first presented with include hirsutism, acanthosis nigricans, androgenic alopecia, and skin tags. Oligomenorrhea was the most common systemic presenting sign. Statistical analysis of various clinical markers revealed correlations with hyperandrogenemia. Acanthosis nigricans and hirsutism were found to be useful clinical markers for hyperandrogenism, whereas androgenic alopecia was not. This study provides some insights into the presentation and diverse manifestations seen in hyperandrogenism. PMID:24933845

  16. Statistical process control based chart for information systems security

    Science.gov (United States)

    Khan, Mansoor S.; Cui, Lirong

    2015-07-01

    Intrusion detection systems have a highly significant role in securing computer networks and information systems. To assure the reliability and quality of computer networks and information systems, it is highly desirable to develop techniques that detect intrusions into information systems. We put forward the concept of statistical process control (SPC) in computer networks and information systems intrusions. In this article we propose exponentially weighted moving average (EWMA) type quality monitoring scheme. Our proposed scheme has only one parameter which differentiates it from the past versions. We construct the control limits for the proposed scheme and investigate their effectiveness. We provide an industrial example for the sake of clarity for practitioner. We give comparison of the proposed scheme with EWMA schemes and p chart; finally we provide some recommendations for the future work.

  17. Energy predictions. [Briefs on 33 charts, figures, and graphs

    Energy Technology Data Exchange (ETDEWEB)

    Freiwald, D.A.

    1977-01-01

    Briefs describe 33 charts, graphs, and schematics offering some recent history and perspectives on the world and U.S. energy situation and the problems for survival facing the world. Of interest is Figure 28, showing the Club of Rome's model of the earth in terms of resource consumption, food, money, people, pollution, etc. A computer was asked to extend recent history into the future and results indicate a collapse of the industrialized system towards an agrarian culture around the year 2025. It is noted that the model did not consider technological initiative or man's willingness to change lifestyles. The final (33) schematic is a guesstimate of noticeable impact timescales, indicating when research projects on transition or ultimate energy sources at LASL might be expected to yield impact. (MCW)

  18. Percentile growth charts for biomedical studies using a porcine model.

    Science.gov (United States)

    Corson, A M; Laws, J; Laws, A; Litten, J C; Lean, I J; Clarke, L

    2008-12-01

    Increasing rates of obesity and heart disease are compromising quality of life for a growing number of people. There is much research linking adult disease with the growth and development both in utero and during the first year of life. The pig is an ideal model for studying the origins of developmental programming. The objective of this paper was to construct percentile growth curves for the pig for use in biomedical studies. The body weight (BW) of pigs was recorded from birth to 150 days of age and their crown-to-rump length was measured over the neonatal period to enable the ponderal index (PI; kg/m3) to be calculated. Data were normalised and percentile curves were constructed using Cole's lambda-mu-sigma (LMS) method for BW and PI. The construction of these percentile charts for use in biomedical research will allow a more detailed and precise tracking of growth and development of individual pigs under experimental conditions.

  19. Developing control charts to review and monitor medication errors.

    Science.gov (United States)

    Ciminera, J L; Lease, M P

    1992-03-01

    There is a need to monitor reported medication errors in a hospital setting. Because the quantity of errors vary due to external reporting, quantifying the data is extremely difficult. Typically, these errors are reviewed using classification systems that often have wide variations in the numbers per class per month. The authors recommend the use of control charts to review historical data and to monitor future data. The procedure they have adopted is a modification of schemes using absolute (i.e., positive) values of successive differences to estimate the standard deviation when only single incidence values are available in time rather than sample averages, and when many successive differences may be zero. PMID:10116719

  20. A geostationary satellite system for mobile multimedia applications using portable, aeronautical and mobile terminals

    Science.gov (United States)

    Losquadro, G.; Luglio, M.; Vatalaro, F.

    1997-01-01

    A geostationary satellite system for mobile multimedia services via portable, aeronautical and mobile terminals was developed within the framework of the Advanced Communications Technology Service (ACTS) programs. The architecture of the system developed under the 'satellite extremely high frequency communications for multimedia mobile services (SECOMS)/ACTS broadband aeronautical terminal experiment' (ABATE) project is presented. The system will be composed of a Ka band system component, and an extremely high frequency band component. The major characteristics of the space segment, the ground control station and the portable, aeronautical and mobile user terminals are outlined.

  1. Aeronautical Engineering: A Continuing Bibliography with Indexes, Supplement 410. Supplement 410

    Science.gov (United States)

    1999-01-01

    This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

  2. The Hill Chart Calculation for Francis Runner Models using the HydroHillChart - Francis Module Software

    Directory of Open Access Journals (Sweden)

    Adelina Bostan

    2015-07-01

    Full Text Available In practice, for the design of hydraulic turbines, laboratory tests performed on reduced scale models of turbines are recommended. The optimisation of a turbine model requires extensive experimental research on several variants of geometry, the improvement of efficiency at an industrial scale which will lead to substantial economic benefits because of the extended life of the turbine. Warranty conditions arisen from model tests will be verified by additional tests performed on industrial prototypes at specific points agreed between the supplier and the customer. The purpose of these tests is the experimental determination of the relationships between the basic parameters of the operating turbine for different operating conditions. The graphic expression of these relationships represent the hill chart of the turbine which is valid for the whole turbine family similar to the tested model.

  3. Exploration of Risks in Autonomous Decision-Making Applied to Aeronautics

    Data.gov (United States)

    National Aeronautics and Space Administration — Prior research into metrics and design for autonomy were presented. At this time, the prospect of adding significant autonomous decision-making on a piloted...

  4. Combustion/Emission Species Monitoring Ground and Flight Aeronautical Research Using a Gas Microsensor Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this program is to develop a miniaturized and in-situ operated gas microsensor array for the real time monitoring of chemical composition of turbine...

  5. Combustion/Emission Species Monitoring Ground and Flight Aeronautical Research Using a Gas Microsensor Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Makel Engineering, Inc. (MEI) and the Ohio State University (OSU) propose to develop high sensitivity, miniaturized and in-situ operated gas sensors for the real...

  6. The Self-Monitoring Mood Chart: Measuring Affect in the Classroom.

    Science.gov (United States)

    Safran, Stephen; Safran, John

    1984-01-01

    A mood chart allows learning and/or behavior disabled students (8-12 years old) to evaluate and monitor their present mood. The chart can also be used to analyze the relationship between mood and inappropriate behavior, to communicate with parents, and to promote children's awareness and understanding of each other's feelings. (CL)

  7. Computer-assisted chart making from the graphic designer's perspective

    Energy Technology Data Exchange (ETDEWEB)

    Marcus, A.

    1980-04-01

    It is important to improve the aesthetics and effectiveness of information graphics through greater awareness of graphic design as a visual communication discipline. Chart making is one subject area in which graphic design awareness can be enhanced. Basic design principles are reviewed which are relevant to creating better charts. Examples demonstrate improvements. 4 figures, 1 table.

  8. Application of interactive motion charts for displaying liver transplantation data in public websites.

    Science.gov (United States)

    Santori, G

    2014-09-01

    In the past several years a vast amount of digital information has become available in every field of science, and ideas to apply improved strategies for obtaining a more in-depth knowledge of the data are considered in many areas. Although several American and European organizations show regularly in their public websites the aggregated results of organ donation and transplantation, no tools are provided to engage with the final users and to enable them to handle these data. In this study, a new model of Web-based interactive motion charts was applied to aggregated liver transplantation data obtained from a consecutive 28-year series of liver transplantation performed in a single Italian center. The interactive charts were obtained by combining the Google visualization application programming interface and the googleVis package within the open source statistical environment R. The interactive charts may be embedded into online/offline Web pages and rendered in each common browser. The users may interact with the charts by selecting chart type (bubble, bar, or line chart), x- and y-axis scales (linear or logarithmic), variables, bubble size, color, and even changing opacity of unselected items. Moreover, the charts may dynamically display the trend over time of each continuous/categoric variable, allowing users both to trace how the lines changes over time and to control the animation speed. The interactive motion charts should be used in the public websites that manage aggregated data concerning organ donation and transplantation. PMID:25242769

  9. Increasing Communication in Geometry by Using a Personal Math Concept Chart

    Science.gov (United States)

    Friedman, Rhonda; Kazerouni, Gety; Lax, Stacey; Weisdorf, Elli

    2011-01-01

    The action research team developed a "Personal Math Concept Chart". This chart required students to describe the mathematical concepts that they were studying in the Geometry strand of Mathematics using their own images and words. In this study, students were encouraged to express their own understanding of geometric concepts in order to…

  10. Calculation of One-Valued Control Limits by Control Chart of Angles

    Institute of Scientific and Technical Information of China (English)

    李元生; 方英; 朱险峰

    2001-01-01

    The data we use to express angle or direction are entitled directional data. In a plan right-an-gled coordinate system the traditional control chart can't solve the quality control problem which the characteristic value is angle. This paper analyses and calculates the one-valued control limits by control chart of angles.

  11. A New Spin on Miscue Analysis: Using Spider Charts to Web Reading Processes

    Science.gov (United States)

    Wohlwend, Karen E.

    2012-01-01

    This article introduces a way of seeing miscue analysis data through a "spider chart", a readily available digital graphing tool that provides an effective way to visually represent readers' complex coordination of interrelated cueing systems. A spider chart is a standard feature in recent spreadsheet software that puts a new spin on miscue…

  12. Use of a PERT Chart to Improve Efficiency of the Dissertation.

    Science.gov (United States)

    Hudson, Shannon M; Laken, Marilyn A

    2015-01-01

    Efficiencies are needed to speed the dissertation process and graduation of prospective new faculty. We used a workflow process, the PERT chart, to organize and manage the many time-delimited tasks necessary for a complex dissertation. This article presents a case example that describes our experience and timely completion of the dissertation. PERT charts are useful tools to improve efficiency in nursing education.

  13. Design and analysis of control charts for standard deviation with estimated parameters

    NARCIS (Netherlands)

    M. Schoonhoven; M. Riaz; R.J.M.M. Does

    2011-01-01

    This paper concerns the design and analysis of the standard deviation control chart with estimated limits. We consider an extensive range of statistics to estimate the in-control standard deviation (Phase I) and design the control chart for real-time process monitoring (Phase II) by determining the

  14. 14 CFR 61.313 - What aeronautical experience must I have to apply for a sport pilot certificate?

    Science.gov (United States)

    2010-01-01

    ... apply for a sport pilot certificate? 61.313 Section 61.313 Aeronautics and Space FEDERAL AVIATION... GROUND INSTRUCTORS Sport Pilots § 61.313 What aeronautical experience must I have to apply for a sport... aeronautical experience you must have to apply for a sport pilot certificate: If you are applying for a...

  15. 14 CFR 300.13 - Permanent disqualification of former Civil Aeronautics Board members and employees and DOT...

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Permanent disqualification of former Civil Aeronautics Board members and employees and DOT employees from matters in which they personally participated. 300.13 Section 300.13 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF...

  16. 77 FR 40405 - Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed and Federal Grant...

    Science.gov (United States)

    2012-07-09

    ... Federal Aviation Administration Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed... Aviation Administration, DOT. ACTION: Notice of a Non-Aeronautical Land-Use Change. SUMMARY: The Federal...-aeronautical land- use change for approximately 38 acres of airport property at Delano Municipal...

  17. 77 FR 13173 - Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed and Federal Grant...

    Science.gov (United States)

    2012-03-05

    ... Federal Aviation Administration Notice of a Non-Aeronautical Land-Use Change Effecting the Quitclaim Deed... Administration, DOT. ACTION: Notice of a Non-aeronautical land-use change. SUMMARY: The Federal Aviation Administration (FAA) proposes to rule and invites public comment on the application for a non-aeronautical...

  18. Robust Hotelling T2 control chart using reweighted minimum vector variance estimators

    Science.gov (United States)

    Ali, Hazlina; Yahaya, Sharipah Soaad Syed; Omar, Zurni

    2014-12-01

    Hotelling T2 control chart is employed to monitor the stability of a multivariate process in Phase I and II. Traditional Hotelling T2 control chart using classical estimators in Phase I, however, suffers from masking and swamping effects and thus jeorpadizes its performance. To alleviate this problem, robust location and scale estimators are recommended instead. In this paper, a new Hotelling T2 control chart based on highly robust and efficient estimators of location and scatter estimators, known as reweighted minimum vector variance estimators, is proposed. Numerical results show that the new chart is not only capable of detecting outliers but it can also control the alarm rates better than the existing charts.

  19. THE IMPACT OF THE BUSINESS ENVIRONMENT ON THE SHAPING OF AN ORGANIZATION CHART

    Directory of Open Access Journals (Sweden)

    Simona BUTA

    2014-06-01

    Full Text Available Since Adam Smith , FW Taylor, H. Fayol and recently , whether we are referring to Peter Drucker, Harrington & Harrington, and other authors consecrated in the literature of management / economics, the organization issues in an organization have grown much in complexity. The manner in which the firm / company constitutes the organization chart induces subsequently, explicitly or not, multiple conditionings in the daily practice of the organization (both in the sense that it may favour certain efforts / strategies or on the contrary it may block such efforts. The size of the company, the market and the technology are the most popular factors that will influence an organization chart.. However, in the context of global crisis and chaotic business environment, new questions arise regarding the model of organization charts and associated management strategies. What are the predictable directions regarding the type of organization chart in the current business environment? How does social competition influence the shape of organization charts in different countries?

  20. A New Approach to Diagnosing Signals from Multivariate EWMA Control Chart

    Institute of Scientific and Technical Information of China (English)

    MA Yi-zhong; ZHAO Feng-yu

    2003-01-01

    Since Lowry et al. [1992] proposed a multivariate version of the exponentially weighted moving average (EWMA) control chart, the multivariate EWMA control chart has become more and more popular in monitoring production processes, especially in chemical processes. A major advantage of multivariate EWMA statistics is that it is sensitive to small and moderate shifts in the mean vector. However, when a multivariate EWMA chart issues a signal, it is difficult to identify which variable or set of variables is out of control. In this paper, we introduce a new approach to diagnosing signals from a multivariate EWMA control chart. The implementation procedure is that when the multivariate EWMA control chart issues a signal, we adopt a univariate diagnostic procedure to identify the variables or/and the principal components that caused the signal.

  1. Application of a binomial cusum control chart to monitor one drinking water indicator

    Directory of Open Access Journals (Sweden)

    Elisa Henning

    2014-02-01

    Full Text Available The aim of this study is to analyze the use of a binomial cumulative sum chart (CUSUM to monitor the presence of total coliforms, biological indicators of quality of water supplies in water treatment processes. The sample series were monthly taken from a water treatment plant and were analyzed from 2007 to 2009. The statistical treatment of the data was performed using GNU R, and routines were created for the approximation of the upper limit of the binomial CUSUM chart. Furthermore, a comparative study was conducted to investigate whether there is a significant difference in sensitivity between the use of CUSUM and the traditional Shewhart chart, the most commonly used chart in process monitoring. The results obtained demonstrate that this study was essential for making the right choice in selecting a chart for the statistical analysis of this process.

  2. Using run charts for cardiovascular disease risk assessments in general practice.

    Science.gov (United States)

    Wells, Susan; Rafter, Natasha; Eggleton, Kyle; Turner, Catherine; Huang, Ying; Bullen, Chris

    2016-06-01

    INTRODUCTION Run charts are quality improvement tools. AIM To investigate the feasibility and acceptability of run charts displaying weekly cardiovascular disease (CVD) risk assessments in general practice and assess their impact on CVD risk assessments. METHODS A controlled non-randomised observational study in nine practices using run charts and nine control practices. We measured the weekly proportion of eligible patients with completed CVD risk assessments for 19 weeks before and after run charts were introduced into intervention practices. A random coefficients model determined changes in CVD risk assessment rates (slope) from pre- to post- intervention by aggregating and comparing intervention and control practices' mean slopes. We interviewed staff in intervention practices about their use of run charts. RESULTS Seven intervention practices used their run chart; six consistently plotting weekly data for >12 weeks and positioning charts in a highly visible place. Staff reported that charts were easy to use, a visual reminder for ongoing team efforts, and useful for measuring progress. There were no significant differences between study groups: the mean difference in pre- to post-run chart slope in the intervention group was 0.03% more CVD risk assessments per week; for the control group the mean difference was 0.07%. The between group difference was 0.04% per week (95% CI: -0.26 to 0.35, P = 0.77). DISCUSSION Run charts are feasible in everyday general practice and support team processes. There were no differences in CVD risk assessment between the two groups, likely due to national targets driving performance at the time of the study. PMID:27477560

  3. Control-Chart Dashboards: managing your numbers instead of your numbers managing you

    International Nuclear Information System (INIS)

    This paper, which documents Fluor Hanford's application of Statistical Process Control (SPC) and Dashboards to support planning and decision making, is a sequel to 'Leading with Leading Indicators' that was presented at WM '05. This year's paper provides more detail on management's use of SPC and control charts and discusses their integration into an executive summary using the popular color-coded dashboard methodology. Fluor Hanford has applied SPC in a non-traditional (that is non-manufacturing) manner. Dr. Shewhart's 75-year-old control-chart methodologies have been updated to modern data processing, but are still founded on his sound, tried and true principles. These methods are playing a key role in safety and quality at what has been called the world's largest environmental cleanup project. The U.S. Department of Energy's (DOE's) Hanford Site played a pivotal role in the nation's defense, beginning in the 1940's when it was established as part of the Manhattan Project. After more than 50 years of producing nuclear weapons, Hanford - which covers 586 square miles in southeastern Washington state - is now focused on three outcomes: 1. Restoring the Columbia River corridor for multiple uses 2. Transitioning the central plateau to support long-term waste management 3. Putting DOE assets to work for the future. The control-chart-based dashboard has been featured by several professional societies in their publications, most recently by the American Society of Safety Engineers. The case is provided for why one should consider switching from bar charts, moving averages, 'rainbow charts', and other non-statistical charting methods, and changing to control charts. Control charts have actually cost less to make than these other charts. Lessons learned from implementing the 'FluorBoard' control-chart-based dashboards will be included. These tools, management theories and methods, coupled with involved leadership and employee efforts, will directly lead to significant

  4. Digital waterway construction based on inland electronic navigation chart

    Science.gov (United States)

    Wang, Xue; Pan, Junfeng; Zhu, Weiwei

    2015-12-01

    With advantages of large capacity, long distance, low energy consumption, low cost, less land occupation and light pollution, inland waterway transportation becomes one of the most important constituents of the comprehensive transportation system and comprehensive water resources utilization in China. As one of "three elements" of navigation, waterway is the important basis for the development of water transportation and plays a key supporting role in shipping economic. The paper discuss how to realize the informatization and digitization of waterway management based on constructing an integrated system of standard inland electronic navigation chart production, waterway maintenance, navigation mark remote sensing and control, ship dynamic management, and water level remote sensing and report, which can also be the foundation of the intelligent waterway construction. Digital waterway construction is an information project and also has a practical meaning for waterway. It can not only meet the growing high assurance and security requirements for waterway, but also play a significant advantage in improving transport efficiency, reducing costs, promoting energy conservation and so on. This study lays a solid foundation on realizing intelligent waterway and building a smooth, efficient, safe, green modern inland waterway system, and must be considered as an unavoidable problem for the coordinated development between "low carbon" transportation and social economic.

  5. Astrobiology: A Roadmap for Charting Life in the Universe

    Science.gov (United States)

    DesMarais, David J.; DeVincezi, D. (Technical Monitor)

    2002-01-01

    Astrobiology is the study of the origin, evolution and distribution of life in the universe. It provides a biological perspective to many areas of NASA research. It links such endeavors as the search for habitable planets, exploration missions to Mars and the outer Solar System, efforts to understand the origins and early evolution of life, and charting the potential of life to adapt to future challenges, both on Earth and in space. Astrobiology addresses the following three basic questions, which have been asked in some form for generations. How does life begin and evolve? Does life exist elsewhere in the universe? What is future of life on Earth and beyond? The NASA Astrobiology Roadmap provides guidance for research and technology development across several NASA Enterprises: Space Science, Earth Science, and the Human Exploration and Development of Space. The Roadmap is formulated in terms of eight Science Goals that outline key domains of investigation that might require perhaps decades of effort to consolidate. For each of these goals, Science Objectives outline more specific high priority near-term efforts for the next three to five years. These twenty objectives will be integrated with NASA strategic planning.

  6. Astronomical Books and Charts in the Book of Bibliographie Coreenne

    Science.gov (United States)

    Lee, Ki-Won; Yang, Hong-Jin; Park, Myeong-Gu

    2008-06-01

    We investigate astronomical materials listed in the book of Bibliographie Coréenne written by Maurice Courant. He classified ancient Korean books into nine Divisions (?) and thirty six Classes (?), and published them as three volumes (ranging from 1894 to 1896) and one supplement (in 1901). In total, 3,821 books including astronomical ones are listed together with information on physical size, possessional place, bibliographical note, and so forth. Although this book is an essential one in the field of Korea bibliography and contains many astronomical materials such as Cheon-Mun-Ryu-Cho ????, Si-Heon-Seo ??????, and Cheon-Sang-Yeol-Cha-Bun-Ya-Ji-Do ????????, it has not been well known to the public nor to astronomical society. Of 3,821 catalogues, we found that about 50 Items (?) are related to astronomy or astrology, and verified that most ! of them are located in the Kyujanggak Royal Library ???. We also found an unknown astronomical chart, Hon-Cheon-Chong-Seong-Yeol-Cha-Bun-Ya-Ji-Do ??????????. Because those astronomical materials are not well known to international astronomical community and there have been few studies on the materials in Korea, we here introduce and review them, particularly with the astronomical viewpoint.

  7. Percentile growth charts for biomedical studies using a porcine model.

    Science.gov (United States)

    Corson, A M; Laws, J; Laws, A; Litten, J C; Lean, I J; Clarke, L

    2008-12-01

    Increasing rates of obesity and heart disease are compromising quality of life for a growing number of people. There is much research linking adult disease with the growth and development both in utero and during the first year of life. The pig is an ideal model for studying the origins of developmental programming. The objective of this paper was to construct percentile growth curves for the pig for use in biomedical studies. The body weight (BW) of pigs was recorded from birth to 150 days of age and their crown-to-rump length was measured over the neonatal period to enable the ponderal index (PI; kg/m3) to be calculated. Data were normalised and percentile curves were constructed using Cole's lambda-mu-sigma (LMS) method for BW and PI. The construction of these percentile charts for use in biomedical research will allow a more detailed and precise tracking of growth and development of individual pigs under experimental conditions. PMID:22444086

  8. Charting the Research Course for Sustainable Aquaculture in Sabah, Malaysia

    Directory of Open Access Journals (Sweden)

    Vun L. W.

    2016-01-01

    Full Text Available Due to arising needs and demands, aquaculture is currently the fastest growing food production sector. In order to increase yield and yet to remain sustainable, the challenges would be to minimise impact on the environment and ecosystem services. Aquaculture activity contributes significantly to Malaysia and also the state of Sabah’s economy and food security. Hence, the future changes in the environment as a result of rapid population growth and development would pose as threats to this industry in terms of quality, quantity and sustainability. Unforeseen environmental changes such as environmental pollution from other sources, climate change and the changes in policies would jeopardize the sustainability of this industry. In order to anticipate such impacts to the aquaculture activities, this paper set to chart a sustainable course for its development. Four important research courses were proposed: establishment of a sustainable framework, assessment of impacts of climate change, viability and vulnerability assessment due to future environmental changes and food security. Such findings would eventually allow the stakeholders to plan and manage the resources and aquaculture activities in such a way that foster sustainable food security and resilient aquatic ecosystems.

  9. Kornati Islands on Old Geographic Maps and Charts

    Directory of Open Access Journals (Sweden)

    Josip Faričić

    2005-09-01

    Full Text Available Based on the analysis of cartographic sources, the paper analyses the historical and geographical development of the Kornati islands, the largest group of Croatian islands. The old maps were used first of all as the means of geographic research that, being necessarily correlated to the simultaneous historical written sources and modern topographic and maritime maps, make the basis for creating a research platform for relevant scientific results to be achieved. On the basis of the old maps it is possible, among other things to anticipate that the Kornati islands used to have great geotraffic significance on the eastern Adriatic sailing route. According to the development of geographic concepts and cartographic methods, the geographic vision of the Kornati islands has been gradually clarified ever since the 16th century. The chart from the Carta di cabotaggio del Mare Adriatico edition published by the Military and Geographic Institute from Milan (1822-1824 presents the turning point with the first complete and mostly precise presentation of the Kornati islands group on the basis of hydrographic and topographic field measurements.

  10. A One-Class Classification-Based Control Chart Using the K-Means Data Description Algorithm

    Directory of Open Access Journals (Sweden)

    Walid Gani

    2014-01-01

    referred to as OC-charts, and extend their applications. We propose a new OC-chart using the K-means data description (KMDD algorithm, referred to as KM-chart. The proposed KM-chart gives the minimum closed spherical boundary around the in-control process data. It measures the distance between the center of KMDD-based sphere and the new incoming sample to be monitored. Any sample having a distance greater than the radius of KMDD-based sphere is considered as an out-of-control sample. Phase I and II analysis of KM-chart was evaluated through a real industrial application. In a comparative study based on the average run length (ARL criterion, KM-chart was compared with the kernel-distance based control chart, referred to as K-chart, and the k-nearest neighbor data description-based control chart, referred to as KNN-chart. Results revealed that, in terms of ARL, KM-chart performed better than KNN-chart in detecting small shifts in mean vector. Furthermore, the paper provides the MATLAB code for KM-chart, developed by the authors.

  11. A Glimpse of Scientific Research on Fundamental Problems of Military and Civil Aeronautics

    Science.gov (United States)

    1939-01-01

    Among the outstanding accomplishments of the last century is man's conquest of the air. That conquest began in 1903 when the Wright brothers made the first successful flight of an airplane at Kitty Hawk, N. C. Five years later the United States Government purchased its first airplane for the use of the Army, and began the training of officers for military flying. During the years immediately preceding the outbreak of the World War the Government and a meager aircraft industry had made important progress, but the Government, practically the only customer, had purchased less than 100 airplanes. In the meantime, leading European nations, sensing acutely the potentialities of aircraft in warfare, had made greater progress and had begun laying the foundations for the new science of aeronautics. The World War gave a remarkable impetus to the development of aeronautics and emphasized the need for organized research on the fundamental problems of flight. By act of Congress approved March 3, 1915, the National Advisory Committee for Aeronautics was created and charged with the duty of supervising, directing, and conducting fundamental scientific research and experiment in aeronautics. With the farsighted support of the Congress the Committee has led the world in the development of unique aeronautical research facilities in its laboratories at Langley Field, Va. The research programs include problems initiated by the Committee and its subcommittees and also investigations requested by the Army, the Navy, and the Civil Aeronautics Authority. The results of researches conducted under one control, serve without duplication of effort, the needs of all branches of aviation, civil and military, and exert a profound influence on the progress of aeronautics by improving the performance, efficiency, and safety of aircraft. A brief description of the results of some of the committee's researches and of the equipment employed will be found in the following pages.

  12. COOP-WONCA charts: a suitable functional status screening instrument in acute low back pain?

    Science.gov (United States)

    Andres, E; Temme, M; Raderschatt, B; Szecsenyi, J; Sandholzer, H; Kochen, M M

    1995-01-01

    BACKGROUND: Functional status is considered an important measure of health status in primary care. The COOP-WONCA charts, which comprise six single-item scales, have mainly been used to determine functional ability in chronically ill patients. AIM: A study was carried out to determine whether the charts are able to measure the degree of functional impairment associated with acute illness and the improvement in functional ability accompanying the process of recovery. METHOD: A total of 95 patients presenting with acute low back pain were recruited from 15 single-handed general practices in northern Germany. At presentation and at two-week follow up, these patients completed self-administered questionnaires which included the COOP-WONCA charts. The charts ask patients to use the timescale of the past two weeks when rating their condition. Baseline and follow-up measurements of the charts were compared and correlations of chart scores with patients' measurements of pain intensity on a visual analogue scale, general practitioners' ratings of impairment and patients' measurements of recovery were analysed. RESULTS: Only the chart measuring change in health revealed a deterioration in functional ability associated with the onset of pain and an improvement in functional status at follow up. Two of the other charts indicated a deterioration at follow up. Only the chart measuring change in health was correlated with ratings of pain and impairment at baseline. At follow up, strong correlations were found between general practitioners' assessments of impairment, patients' ratings of pain and patients' ratings of recovery for all scales except for those measuring social activities and daily activities. The patients interpreted the instructions for using the COOP-WONCA charts differently; some included the period of acute back pain while others did not. CONCLUSION: Of the six charts only the change in health chart proved to be a suitable scale for measuring short-term changes

  13. An application of characteristic function in order to predict reliability and lifetime of aeronautical hardware

    Science.gov (United States)

    Żurek, Józef; Kaleta, Ryszard; Zieja, Mariusz

    2016-06-01

    The forecasting of reliability and life of aeronautical hardware requires recognition of many and various destructive processes that deteriorate the health/maintenance status thereof. The aging of technical components of aircraft as an armament system proves of outstanding significance to reliability and safety of the whole system. The aging process is usually induced by many and various factors, just to mention mechanical, biological, climatic, or chemical ones. The aging is an irreversible process and considerably affects (i.e. reduces) reliability and lifetime of aeronautical equipment. Application of the characteristic function of the aging process is suggested to predict reliability and lifetime of aeronautical hardware. An increment in values of diagnostic parameters is introduced to formulate then, using the characteristic function and after some rearrangements, the partial differential equation. An analytical dependence for the characteristic function of the aging process is a solution to this equation. With the inverse transformation applied, the density function of the aging of aeronautical hardware is found. Having found the density function, one can determine the aeronautical equipment's reliability and lifetime. The in-service collected or the life tests delivered data are used to attain this goal. Coefficients in this relationship are found using the likelihood function.

  14. NEW APPROACH FOR MEASUREMENT OF THE EFFICIENCY OF Cpm AND Cpmk CONTROL CHARTS

    Directory of Open Access Journals (Sweden)

    María Teresa Carot

    2013-12-01

    Full Text Available Process capability analysis is a very effective way for improving process quality by relating process variation to customer requirements. It compares the output of a process to the specification limits by using process capability indices (PCIs. PCIs provide numerical measures on whether aprocess conforms to the defined manufacturing capability prerequisite. In this paper, a new approach based on non-central Chi-Square, ω and φ distributions is presented to design the capability control charts. The main purpose of this work is to investigate the efficiency of the proposed control charts comparing with the traditional control charts. The advantage of using the proposed capability control charts is that, the practitioner can monitor the process mean and the process variability by looking at one chart. Moreover the proposed capability control charts are easily appended to X-R control chart and provide judgments considering the ability of a process to meet requirements. To demonstrate the applicability of the proposed approach an illustrative example is conducted.

  15. Utilisation of CryoSat-2 SAR altimeter in operational ice charting

    Directory of Open Access Journals (Sweden)

    E. Rinne

    2015-08-01

    Full Text Available We present methods to utilise Cryosat-2 (CS-2 Synthetic Aperture (SAR mode data in operational ice charting. We compare CS-2 data qualitatively to Synthetic Aperture Radar (SAR mosaics over Barents and Kara seas. Furthermore, we compare the CS-2 to archived operational ice charts. We present distributions of four CS-2 waveform parameters for different ice types as presented in the ice charts. We go on to present an automatic classification method for CS-2 data which, after training with operational ice charts, is capable of determining open water from ice with a hit rate of > 90 %. The training data is dynamically updated every five days using the most recent 15 days CS-2 data and operative ice charts. This helps the adaption of the classifier to the evolving ice/snow conditions throughout winter. The classifier is also capable of detecting three different ice classes (thin and thick first year ice as well as old ice with success rates good enough for the output to be usable to support operational ice charting. Finally, we present a near real time CS-2 product just plotting the waveform characteristics and conclude that even such a simple product is usable for some of the needs of ice charting.

  16. News from the Library: The 8th edition Karlsruhe nuclide chart has been released

    CERN Multimedia

    CERN Library

    2012-01-01

    The 8th edition of the Karlsruhe Nuclide Chart contains new data not found in the 7th edition.   Since 1958, the well-known Karlsruhe Nuclide Chart has provided scientists with structured, valuable information on the half-lives, decay modes and energies of radioactive nuclides. The chart is used in many disciplines in physics (health physics, radiation protection, nuclear and radiochemistry, astrophysics, etc.) but also in the life and earth sciences (biology, medicine, agriculture, geology, etc.). The 8th edition of the Karlsruhe Nuclide Chart contains new data on 737 nuclides not found in the 7th edition. In total, nuclear data on 3847 experimentally observed ground states and isomers are presented. A new web-based version of this chart is in the final stages of development for use within the Nucleonica Nuclear Science Portal - a portal for which CERN has an institutional license. The chart is also available in paper format.   If you want to buy a paper version of the chart, ple...

  17. Bio-Potential Signal Extraction from Multi-Channel Paper Recorded Charts

    Directory of Open Access Journals (Sweden)

    Ali S.A. Al-Mejrad

    2011-01-01

    Full Text Available Abstract: Problem statement: Almost all of the modern biomedical equipments that record the biopotential actions have digital output but the paper chart records are a must. The volume of these records is significant and increasing rapidly. Keeping a bio-signal chart of a patient make it easy for quick assessment but still create problems in the essence of data storage, archiving , data interchange and communications. Approach: A solution to all these problems is to convert these paper records to digital form. In this study, a method for bio-potential signal extraction from single or multi-channel paper recorded charts using image processing techniques is developed. Results: After scanning the paper charts and converting them into images using a commercial scanner, the developed algorithm applied to eliminate the background of the scanned paper chart from any recording device single channel or multi-channel using binary neighborhood morphological operations then converting the extracted waveform image into quantized values representing the waveform recorded paper chart. The extracted signal then filtered to remove the high frequency effects that result from the morphological operations. A correlation and frequency analysis procedure then conducted to verify the result against known sampled waveform. Conclusion: A chart paper conversion to digital values that represent only the values for the biopotential waveform and eliminating the other irrelevant information has been achieved. These resulted in a less space occupation of patient records and make it easy for data further processing and manipulations."

  18. Photometric Compliance of Tablet Screens and Retro-Illuminated Acuity Charts As Visual Acuity Measurement Devices.

    Science.gov (United States)

    Livingstone, I A T; Tarbert, C M; Giardini, M E; Bastawrous, A; Middleton, D; Hamilton, R

    2016-01-01

    Mobile technology is increasingly used to measure visual acuity. Standards for chart-based acuity tests specify photometric requirements for luminance, optotype contrast and luminance uniformity. Manufacturers provide some photometric data but little is known about tablet performance for visual acuity testing. This study photometrically characterised seven tablet computers (iPad, Apple inc.) and three ETDRS (Early Treatment Diabetic Retinopathy Study) visual acuity charts with room lights on and off, and compared findings with visual acuity measurement standards. Tablet screen luminance and contrast were measured using nine points across a black and white checkerboard test screen at five arbitrary brightness levels. ETDRS optotypes and adjacent white background luminance and contrast were measured. All seven tablets (room lights off) exceeded the most stringent requirement for mean luminance (≥ 120 cd/m2) providing the nominal brightness setting was above 50%. All exceeded contrast requirement (Weber ≥ 90%) regardless of brightness setting, and five were marginally below the required luminance uniformity threshold (Lmin/Lmax ≥ 80%). Re-assessing three tablets with room lights on made little difference to mean luminance or contrast, and improved luminance uniformity to exceed the threshold. The three EDTRS charts (room lights off) had adequate mean luminance (≥ 120 cd/m2) and Weber contrast (≥ 90%), but all three charts failed to meet the luminance uniformity standard (Lmin/Lmax ≥ 80%). Two charts were operating beyond manufacturer's recommended lamp replacement schedule. With room lights on, chart mean luminance and Weber contrast increased, but two charts still had inadequate luminance uniformity. Tablet computers showed less inter-device variability, higher contrast, and better luminance uniformity than charts in both lights-on and lights-off environments, providing brightness setting was >50%. Overall, iPad tablets matched or marginally out

  19. Photometric Compliance of Tablet Screens and Retro-Illuminated Acuity Charts As Visual Acuity Measurement Devices.

    Directory of Open Access Journals (Sweden)

    I A T Livingstone

    Full Text Available Mobile technology is increasingly used to measure visual acuity. Standards for chart-based acuity tests specify photometric requirements for luminance, optotype contrast and luminance uniformity. Manufacturers provide some photometric data but little is known about tablet performance for visual acuity testing. This study photometrically characterised seven tablet computers (iPad, Apple inc. and three ETDRS (Early Treatment Diabetic Retinopathy Study visual acuity charts with room lights on and off, and compared findings with visual acuity measurement standards. Tablet screen luminance and contrast were measured using nine points across a black and white checkerboard test screen at five arbitrary brightness levels. ETDRS optotypes and adjacent white background luminance and contrast were measured. All seven tablets (room lights off exceeded the most stringent requirement for mean luminance (≥ 120 cd/m2 providing the nominal brightness setting was above 50%. All exceeded contrast requirement (Weber ≥ 90% regardless of brightness setting, and five were marginally below the required luminance uniformity threshold (Lmin/Lmax ≥ 80%. Re-assessing three tablets with room lights on made little difference to mean luminance or contrast, and improved luminance uniformity to exceed the threshold. The three EDTRS charts (room lights off had adequate mean luminance (≥ 120 cd/m2 and Weber contrast (≥ 90%, but all three charts failed to meet the luminance uniformity standard (Lmin/Lmax ≥ 80%. Two charts were operating beyond manufacturer's recommended lamp replacement schedule. With room lights on, chart mean luminance and Weber contrast increased, but two charts still had inadequate luminance uniformity. Tablet computers showed less inter-device variability, higher contrast, and better luminance uniformity than charts in both lights-on and lights-off environments, providing brightness setting was >50%. Overall, iPad tablets matched or marginally out

  20. Performance of Statistical Control Charts with Bilateral Limits of Probability to Monitor Processes Weibull in Maintenance

    Directory of Open Access Journals (Sweden)

    Quintana Alicia Esther

    2015-01-01

    Full Text Available Manufacturing with optimal quality standards is underpinned to the high reliability of its equipment and systems, among other essential pillars. Maintenance Engineering is responsible for planning control and continuous improvement of its critical equipment by any approach, such as Six Sigma. This is nourished by numerous statistical tools highlighting, among them, statistical process control charts. While their first applications were in production, other designs have emerged to adapt to new needs as monitoring equipment and systems in the manufacturing environment. The time between failures usually fits an exponential or Weibull model. The t chart and adjusted t chart, with probabilistic control limits, are suitable alternatives to monitor the mean time between failures. Unfortunately, it is difficult to find publications of them applied to the models Weibull, very useful in contexts such as maintenance. In addition, literature limits the study of their performance to the analysis of the standard metric average run length, thus giving a partial view. The aim of this paper is to explore the performance of the t chart and adjusted t chart using three metrics, two unconventional. To do this, it incorporates the concept of lateral variability, in their forms left and right variability. Major precisions of the behavior of these charts allow to understand the conditions under which are suitable: if the main objective of monitoring lies in detecting deterioration, the t chart with adjustment is recommended. On the other hand, when the priority is to detect improvements, the t chart without adjustment is the best choice. However, the response speed of both charts is very variable from run to run.

  1. Charting early trajectories of executive control with the shape school.

    Science.gov (United States)

    Clark, Caron A C; Sheffield, Tiffany D; Chevalier, Nicolas; Nelson, Jennifer Mize; Wiebe, Sandra A; Espy, Kimberly Andrews

    2013-08-01

    Despite acknowledgement of the importance of executive control for learning and behavior, there is a dearth of research charting its developmental trajectory as it unfolds against the background of children's sociofamilial milieus. Using a prospective, cohort-sequential design, this study describes growth trajectories for inhibitory control and cognitive flexibility across the preschool period in relation to child sex and sociofamilial resources. At ages 3, 3.75, 4.5, and 5.25 years, children (N = 388) from a broad range of social backgrounds were assessed using the Shape School, a graduated measure of executive control incorporating baseline, inhibitory control, and cognitive flexibility conditions. Measures of children's proximal access to learning resources and social network supports were collected at study entry. Findings revealed substantial gains in accuracy and speed for all Shape School conditions, these gains being particularly accelerated between ages 3 and 3.75 years. Improvements in inhibitory control were more rapid than those in flexible switching. Age-related differences in error and self-correction patterns on the Shape School also suggest qualitative changes in the underlying processes supporting executive performance across early childhood. Children from homes with fewer learning resources showed a subtle lag in inhibition and cognitive flexibility performance that persisted at kindergarten entry age, despite exhibiting gradual catch up to their more advantaged peers for the nonexecutive, baseline task condition. The study provides a unique characterization of the early developmental pathways for inhibitory control and cognitive flexibility and highlights the critical role of stimulating early educational resources for shaping the dynamic ontogeny of executive control. PMID:23106846

  2. The first published chart of the Andromeda Nebula, 1667

    Science.gov (United States)

    Gingerich, Owen

    2014-06-01

    The Parisian astronomer Ismaél Bullialdus (1605-1694) is known for his planetary tables (Astronomia philolaica, 1645) based on a geometrical approximation to the Keplerian ellipse, and for his long correspondence with the Danzig astronomer Johannes Hevelius and with Christiaan Huygens. Bullialdus became interested in the nascent study of variable stars, and in 1667 published a small pamphlet with two contributions, one on Mira Ceti and the other on the nebula in Andromeda. He found a manuscript portraying the nebula with the date 1428, and because Tycho Brahe never mentioned a nebula in Andromeda, Bullialdus conjectured that this object was a variable that had disappeared in the intervening era. “We conclude this since this conglomeration was observed neither by Hipparchus nor anyone else in antiquity, nor in the previous age by Tycho, nor in the age of our forefathers like Bayer.” His publication included a handsome engraving of the image of Andromeda and the position of the nebula, its first printed chart. I recently acquired a copy of this rare pamphlet, Ad astronomos monita duo, and realized that the image matched a manuscript now in the Gotha Research Library, a 15th-century Latin version based on the work of the tenth-century Islamic astronomer, al-Sufi. The manuscript does not carry the name of al-Sufi, and hence Bullialdus had no real clue about its origin or its date of composition. Paul Kunitzsch (The Arabs and the Stars, 1989, Article XI, “The Astronomer Abu ’l-Husayn al-Sufi”) has identified a group of eight “Latin al-Sufi” manuscripts from this period, scattered in European libraries, but only the one now in Gotha is an exact match to Bullialdus’ engraving. The al-Sufi manuscript was given to the Gotha Library in 1798 by Duke Ernst II of Saxonia-Gotha-Altenburg, who must have acquired it from France sometime in the 18th century.

  3. User's Guide to the Energy Charting and Metrics Tool (ECAM)

    Energy Technology Data Exchange (ETDEWEB)

    Taasevigen, Danny J.; Koran, William

    2012-02-28

    The intent of this user guide is to provide a brief description of the functionality of the Energy Charting and Metrics (ECAM) tool, including the expanded building re-tuning functionality developed for Pacific Northwest National laboratory (PNNL). This document describes the tool's general functions and features, and offers detailed instructions for PNNL building re-tuning charts, a feature in ECAM intended to help building owners and operators look at trend data (recommended 15-minute time intervals) in a series of charts (both time series and scatter) to analyze air-handler, zone, and central plant information gathered from a building automation system (BAS).

  4. MEASUREMENT ERROR EFFECT ON THE POWER OF CONTROL CHART FOR ZERO-TRUNCATED POISSON DISTRIBUTION

    Directory of Open Access Journals (Sweden)

    Ashit Chakraborty

    2013-09-01

    Full Text Available Measurement error is the difference between the true value and the measured value of a quantity that exists in practice and may considerably affect the performance of control charts in some cases. Measurement error variability has uncertainty which can be from several sources. In this paper, we have studied the effect of these sources of variability on the power characteristics of control chart and obtained the values of average run length (ARL for zero-truncated Poisson distribution (ZTPD. Expression of the power of control chart for variable sample size under standardized normal variate for ZTPD is also derived.

  5. Mutation-based growth charts for SEDC and other COL2A1 related dysplasias

    DEFF Research Database (Denmark)

    Terhal, Paulien A; van Dommelen, Paula; Le Merrer, Martine;

    2012-01-01

    From data collected via a large international collaborative study, we have constructed a growth chart for patients with molecularly confirmed congenital spondylo-epiphyseal dysplasia (SEDC) and other COL2A1 related dysplasias. The growth chart is based on longitudinal height measurements of 79...... patients with glycine substitutions in the triple-helical domain of COL2A1. In addition, measurements of 27 patients with other molecular defects, such as arginine to cysteine substitutions, splice mutations, and mutations in the C-terminal propeptide have been plotted on the chart. Height of the patients...

  6. Geo structural chart of Uruguay. Scale 1/2.000.000

    International Nuclear Information System (INIS)

    This work is about the Geo-Structural Chart of Uruguay , Esca le 1 / 2,000,000. The geological information synthesis in the country, obtained from: published geological work or whose information is registered by laboratory work and geophysical surveys. This Chart will allow an overview of the degree of geological knowledge of Uruguay, restricted to the limits imposed by the scale of this work. The realization of this Chart included a thorough and careful compilation, critical analysis, standardization and interpretation of all geological and geophysical maps available in the country

  7. The "Apollo" of Aeronautics: NASA's Aircraft Energy Efficiency Program, 1973-1987

    Science.gov (United States)

    Bowles, Mark D.

    2010-01-01

    In fall 1975, 10 distinguished United States Senators from the Aeronautical and Space Sciences Committee summoned a group of elite aviation experts to Washington, DC. The Senators were holding hearings regarding the state of the American airline industry, which was struggling in the wake of the 1973 Arab oil embargo and the dramatically increasing cost of fuel. Providing testimony were presidents or vice presidents of United Airlines, Boeing, Pratt & Whitney, and General Electric. Other witnesses included high-ranking officials from the National Aeronautics and Space Administration (NASA), the U.S. Air Force, and the American Institute of Aeronautics and Astronautics. Their Capitol Hill testimony painted a bleak economic picture, described in phrases that included immediate crisis condition, long-range trouble, serious danger, and economic dislocation.

  8. 7 CFR Appendix 1 to Part 799 - Organization Chart FSA-USDA

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE ENVIRONMENTAL PROTECTION ENVIRONMENTAL QUALITY AND RELATED ENVIRONMENTAL CONCERNS-COMPLIANCE WITH THE NATIONAL ENVIRONMENTAL POLICY ACT Pt. 799, App. 1 Appendix 1 to Part 799—Organization Chart...

  9. Sea Ice Charts of the Russian Arctic in Gridded Format, 1933-2006

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Arctic and Antarctic Research Institute (AARI) in St. Petersburg, Russia, produces sea ice charts for safety of navigation in the polar regions and for other...

  10. The Dehn Collection of Arctic Sea Ice Charts, 1953-1986

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Snow and Ice Data Center holds a collection of charts depicting ice conditions in the seas off Alaska and western Canada coasts. Ice edge position and...

  11. Applying Nightingale charts to evaluate the heterogeneity of biomedical waste in a Hospital

    Directory of Open Access Journals (Sweden)

    Janini Cristina Paiz

    2014-12-01

    Full Text Available OBJECTIVES: to evaluate the heterogeneity of biomedical waste (BW using Nightingale charts.METHOD: cross-sectional study consisting of data collection on wastes (direct observation of receptacles, physical characterisation, and gravimetric composition, development of a Management Information System, and creation of statistical charts.RESULTS: the wastes with the greatest degree of heterogeneity are, in order, recyclable, infectious, and organic wastes; chemical waste had the most efficient segregation; Nightingale charts are useful for quick visualisation and systematisation of information on heterogeneity.CONCLUSION: the development of a management information system and the use of Nightingale charts allows for the identification and correction of errors in waste segregation, which increase health risks and contamination by infectious and chemical wastes and reduce the sale and profit from recyclables.

  12. Brief History of Measurement Systems with a Chart of the Modernized Metric System

    Science.gov (United States)

    Social Education, 1977

    1977-01-01

    A history of measurement systems is presented. Topics discussed include standardization of units, invention of means for weighing, evolution and international adoption of the metric system. A chart of the modernized metric system is included. (Author/DB)

  13. Capabilities of Statistical Residual-Based Control Charts in Short- and Long-Term Stock Trading

    Directory of Open Access Journals (Sweden)

    Žmuk Berislav

    2016-03-01

    Full Text Available The aim of this paper is to introduce and develop additional statistical tools to support the decision-making process in stock trading. The prices of CROBEX10 index stocks on the Zagreb Stock Exchange were used in the paper. The conducted trading simulations, based on the residual-based control charts, led to an investor’s profit in 67.92% cases. In the short run, the residual-based cumulative sum (CUSUM control chart led to the highest portfolio profits. In the long run, when average stock prices were used and 2-sigma control limits set, the residual-based exponential weighted moving average control chart had the highest portfolio profit. In all other cases in the long run, the CUSUM control chart appeared to be the best choice. The acknowledgment that the SPC methods can be successfully used in stock trading will, hopefully, increase their use in this field.

  14. Content knowledge and problem-solving skill in reviewing medical charts.

    Science.gov (United States)

    Dawson-Saunders, B; Mast, T A; Finch, W T; Konrad, H R; Folse, J R

    1984-01-01

    Skills in reviewing medical charts have been demonstrated components of clinical competence related to knowledge base, level of clinical experience, and basic observational skills. A study of the generalizability of performance on chart review exercises, which controlled for knowledge in the content area, was undertaken to determine their potential in evaluating students' problem-solving ability. Results of the study indicate that the case specificity which has characterized simulated problem-solving tasks is largely case, rather than content, specificity: correlations between scores on single charts demonstrated no consistent relationships for measures of proficiency, efficiency, and diagnostic accuracy. However, averaging the scores on two charts and then computing correlations resulted in significant positive measures for both proficiency and efficiency. The effects of length and difficulty level on the generalizability of tests of problem-solving ability are areas suggested for future research.

  15. Arctic Sea Ice Concentration and Extent from Danish Meteorological Institute Sea Ice Charts, 1901-1956

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set provides estimates of Arctic sea ice extent and concentration from 1901 to 1956 created from a collection of historic, hand-drawn sea ice charts from...

  16. Guideline implementation in clinical practice: Use of statistical process control charts as visual feedback devices

    Directory of Open Access Journals (Sweden)

    Fahad A Al-Hussein

    2009-01-01

    Conclusions: A process of audits in the context of statistical process control is necessary for any improvement in the implementation of guidelines in primary care. Statistical process control charts are an effective means of visual feedback to the care providers.

  17. Office of Coast Survey's Collection of Print on Demand Charts (POD)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA, National Ocean Service, Office of Coast Survey is responsible to build and maintain a suite of more than 1000 nautical charts that are used by commercial and...

  18. Adoption and Foster Care Analysis and Reporting System Trends Chart and Table

    Data.gov (United States)

    U.S. Department of Health & Human Services — The AFCARS Trends Chart tracks children in Foster Care from FY 2002 through the most recent year. A table of data and a graphic depiction of trends are shown for...

  19. Do gender-specific and high-resolution three dimensional body charts facilitate the communication of pain for women?

    DEFF Research Database (Denmark)

    Egsgaard, Line Lindhardt; Christensen, Trine Søby; Petersen, Ida Munk;

    2016-01-01

    enabled a more accurate expression of their pain due to the detailed contours of the musculature and bone structure, however, patients also reported the 3D body chart was too human and believed that skin-like appearance limited 'deep pain' expressions. CONCLUSIONS: Providing gender-specific body charts...... and quantitative responses of the drawing experience. RESULTS: The consistency between body charts were high (Part I: ICC=0.980, Part II: ICC=0.994). The preference ratio for the masculine to feminine body schemas were 6:35 and 18:23 for the 2D to 3D female body charts. Patients reported that the 3D body chart...

  20. Pain charts (body maps or manikins) in assessment of the location of pediatric pain

    OpenAIRE

    von Baeyer, Carl L; Lin, Vivian; Seidman, Laura C.; Tsao, Jennie CI; Zeltzer, Lonnie K.

    2011-01-01

    This article surveys the use of pain charts or pain drawings in eliciting information about the location of pain symptoms from children and adolescents. While pain charts are widely used and have been incorporated in multidimensional pediatric pain questionnaires and diaries, they present a number of issues requiring further study. These include, in particular, the number and size of different locations or areas of pain that need to be differentiated; the age at which children are able to com...

  1. Use of a PERT Chart to Improve Efficiency of the Dissertation.

    Science.gov (United States)

    Hudson, Shannon M; Laken, Marilyn A

    2015-01-01

    Efficiencies are needed to speed the dissertation process and graduation of prospective new faculty. We used a workflow process, the PERT chart, to organize and manage the many time-delimited tasks necessary for a complex dissertation. This article presents a case example that describes our experience and timely completion of the dissertation. PERT charts are useful tools to improve efficiency in nursing education. PMID:26328297

  2. Trading Signal Generation Using A Combination of Chart Patterns and Indicators

    OpenAIRE

    Chalothon Chootong; Ohm Sornil,

    2012-01-01

    Chart patterns and indicators are popular technical tools for making investment decisions. This article presents a trading strategy combining price movement patterns, candlestick chart patterns, and trading indicators, including Moving Average, Exponential Moving Average, Bollinger Bands, On Balance Volume, Relative Strength Index, Moving Average Convergence Divergence, and Stochastic Oscillator, with the aim to increase the return on investment. A neural network ensemble is employed to deter...

  3. Determination of Egg Shell Quality with P Control Charts in Poultry

    OpenAIRE

    Melis Çelik Güney; Gökhan Tamer Kayaalp

    2016-01-01

    Broken or cracked eggs are important factor in determining the quality of the egg shell. Manufacturers are experience great losses because broken or cracked eggs aren’t evaluated. The manufacturers need control charts throughout the production to determine whether process is under control. In this study, broken and cracked eggs which are taken Cukurova University, Faculty of Agriculture, Department of Animal Science, Poultry Businesses during 52 weeks are determined. P control charts of the d...

  4. ABOUT THE DIAGRAMS OF LINEAR TRANSFORMER AND HIS CHART OF SUBSTITUTION VECTORIAL AND TOPOGRAPHICAL

    OpenAIRE

    Prydubkov, P.; Khomenko, I.

    2011-01-01

    It is shown, that diagrams vectorial and topographical provide the highquality control of calculation of linear transformer at his planning, accordance of diagrams of transformer vectorial and topographical is set to similar diagrams of the developed chart of substitution of transformer, not containing inductive communications, it is proved, what only the given chart of substitution of transformer corresponds to the electromagnetic processes of linear transformer.

  5. Charts of episodes and chronometric duration have implications for provinces such as the Kaapvaal

    Directory of Open Access Journals (Sweden)

    H. de la R. Winter

    1997-07-01

    Full Text Available An accurate basin analysis and knowledge of its evolutionary development being a prerequisite framework for metallogenic model­ling, a procedure was developed for the Kaapvaal Province to maximise quantitative observational data and constrain assumptions and interpretations. Employing an episodes chart to display various events interactively and its conversion to a geochronometric chart as the geological model, the method was applied to existing stratigraphic studies.

  6. p-charts in the quality control of the grading process in the high education

    Directory of Open Access Journals (Sweden)

    Savić Mirko

    2006-01-01

    Full Text Available European countries are making efforts to change their educational system These changes include implementation of the ECTS (European Credit Transfer and Accumulation System and are based on the Bologna Declaration. Adoption of ECTS will necessitate new quality standards in higher education especially in grading procedures. With only small modifications, the control charts(such as p-charts used in production and distribution applications can be applied to educational purposes.

  7. A chart for the energy levels of the square quantum well

    CERN Document Server

    Chiani, M

    2016-01-01

    A chart for the quantum mechanics of a particle of mass $m$ in a one-dimensional potential well of width $w$ and depth $V_0$ is derived. The chart is obtained by normalizing energy and potential through multiplication by ${8 m}{h^2} / w^2$, and gives directly the allowed couples (potential, energy), providing insights on the relation between the parameters and the number of allowed energy levels.

  8. Minimal TestCase Generation for Object-Oriented Software with State Charts

    OpenAIRE

    Ranjita Kumari Swain; Prafulla Kumar Behera; Durga Prasad Mohapatra

    2012-01-01

    Today statecharts are a de facto standard in industry for modeling system behavior. Test data generation is one of the key issues in software testing. This paper proposes an reduction approach to test data generation for the state-based software testing. In this paper, first state transition graph is derived from state chart diagram. Then, all the required information are extracted from the state chart diagram. Then, test cases are generated. Lastly, a set of test cases are minimized by calcu...

  9. LBL Socio-Economic Environmental-Demographic Information System (SEEDIS). Chart: graphic analysis and display system

    Energy Technology Data Exchange (ETDEWEB)

    Sventek, V.A.

    1978-03-01

    The Chart Graphic Analysis and Display System was developed as part of Lawrence Berkeley Laboratory's Socio-Economic-Environmental-Demographic Information System (SEEDIS) to provide a tool with which users could draw graphs, print tables of numbers, do analysis, and perform basic statistical operations on the same set of data from a terminal in their own office. The Chart system's operation is completely independent of the type of data being entered and has been used for applications ranging from employment to energy data. Users frequently save the data they put into Chart and add to it on a regular basis, and thereby create personal databases which can be blended with information from the formal databases maintained at LBL. Using any computer system requires that the user learn a set of instructions, which at the onset often seems overwhelming. It is the purpose of this workbook to make this initial learning process less traumatic. The typical use of Chart is to enter a set of numbers, and then tell Chart what should be done with them. Chart commands take the form of gruff pidgin English. There are approximately 50 commands available. This workbook illustrates the basic commands. (RWR)

  10. Dynamic probability control limits for risk-adjusted Bernoulli CUSUM charts.

    Science.gov (United States)

    Zhang, Xiang; Woodall, William H

    2015-11-10

    The risk-adjusted Bernoulli cumulative sum (CUSUM) chart developed by Steiner et al. (2000) is an increasingly popular tool for monitoring clinical and surgical performance. In practice, however, the use of a fixed control limit for the chart leads to a quite variable in-control average run length performance for patient populations with different risk score distributions. To overcome this problem, we determine simulation-based dynamic probability control limits (DPCLs) patient-by-patient for the risk-adjusted Bernoulli CUSUM charts. By maintaining the probability of a false alarm at a constant level conditional on no false alarm for previous observations, our risk-adjusted CUSUM charts with DPCLs have consistent in-control performance at the desired level with approximately geometrically distributed run lengths. Our simulation results demonstrate that our method does not rely on any information or assumptions about the patients' risk distributions. The use of DPCLs for risk-adjusted Bernoulli CUSUM charts allows each chart to be designed for the corresponding particular sequence of patients for a surgeon or hospital.

  11. Fusing Multiscale Charts into 3D ENC Systems Based on Underwater Topography and Remote Sensing Image

    Directory of Open Access Journals (Sweden)

    Tao Liu

    2015-01-01

    Full Text Available The purpose of this study is to propose an approach to fuse multiscale charts into three-dimensional (3D electronic navigational chart (ENC systems based on underwater topography and remote sensing image. This is the first time that the fusion of multiscale standard ENCs in the 3D ENC system has been studied. First, a view-dependent visualization technology is presented for the determination of the display condition of a chart. Second, a map sheet processing method is described for dealing with the map sheet splice problem. A process order called “3D order” is designed to adapt to the characteristics of the chart. A map sheet clipping process is described to deal with the overlap between the adjacent map sheets. And our strategy for map sheet splice is proposed. Third, the rendering method for ENC objects in the 3D ENC system is introduced. Fourth, our picking-up method for ENC objects is proposed. Finally, we implement the above methods in our system: automotive intelligent chart (AIC 3D electronic chart display and information systems (ECDIS. And our method can handle the fusion problem well.

  12. Overview of the consortium of hospitals advancing research on tobacco (chart

    Directory of Open Access Journals (Sweden)

    Riley William T

    2012-08-01

    Full Text Available Abstract Background The Consortium of Hospitals Advancing Research on Tobacco (CHART is a network of six projects and a research coordinating unit funded by the National Heart, Lung, and Blood Institute, the National Cancer Institute, the National Institute on Drug Abuse, and the National Institutes of Health (NIH Office of Behavioral and Social Science Research. The CHART projects will assess the effectiveness and cost-effectiveness of smoking cessation interventions initiated during hospitalization and continued post-discharge. Methods/design Along with a seventh project funded previously under the NIH Challenge grants, the CHART projects will assess smoking cessation strategies delivered to approximately 10,000 hospitalized smokers across a geographically diverse group of nearly 20 private, public, academic, and community hospitals. The CHART research coordinating unit at Kaiser Permanente Center for Health Research provides organizational and data coordination support, facilitating the development of common measures for combining data from multiple CHART projects. Discussion The targeted enrollment in CHART, if achieved, will represent the largest, most diverse pooled dataset of hospitalized smokers receiving smoking cessation assistance, and is designed to contribute to the dissemination and implementation of smoking cessation interventions provided by hospital systems.

  13. 77 FR 27663 - Airworthiness Directives; Aeronautical Accessories, Inc. High Landing Gear Forward Crosstube...

    Science.gov (United States)

    2012-05-11

    ... Accessories, Inc. High Landing Gear Forward Crosstube Assembly AGENCY: Federal Aviation Administration (FAA... directive (AD) for Aeronautical Accessories, Inc. (AAI) high landing gear forward crosstube assemblies... crosstubes. The proposed actions are intended to prevent failure of a crosstube, collapse of the landing...

  14. 77 FR 5420 - Airworthiness Directives; Aeronautical Accessories Inc. High Landing Gear Aft Crosstube Assembly

    Science.gov (United States)

    2012-02-03

    ... Accessories Inc. High Landing Gear Aft Crosstube Assembly AGENCY: Federal Aviation Administration (FAA), DOT... (AD) for the Aeronautical Accessories Inc. (AAI) High Landing Gear Aft Crosstube Assembly (aft... proposed actions are intended to prevent failure of a crosstube, collapse of the landing gear,...

  15. 76 FR 485 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model...

    Science.gov (United States)

    2011-01-05

    ... System Design Review, Flammability Reduction and Maintenance and Inspection Requirements'' (66 FR 23086... Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G Airplanes AGENCY... revising the FAA- approved maintenance program by incorporating new airworthiness limitations for fuel...

  16. 76 FR 41647 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model...

    Science.gov (United States)

    2011-07-15

    ... Register on January 5, 2011 (76 FR 485). That NPRM proposed to continue to require revising the maintenance... Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G Airplanes AGENCY... revising the FAA-approved maintenance program by incorporating new airworthiness limitations for fuel...

  17. Engineer in charge: A history of the Langley Aeronautical Laboratory, 1917-1958

    Science.gov (United States)

    Hansen, James R.

    1986-01-01

    A history is presented by using the most technologically significant research programs associated with the Langley Aeronautical Laboratory from 1917 to 1958 and those programs that, after preliminary research, seemed best to illustrate how the laboratory was organized, how it works, and how it cooperated with industry and the military.

  18. 75 FR 36722 - Aeronautics Science and Technology Subcommittee; Committee on Technology; National Science and...

    Science.gov (United States)

    2010-06-28

    ... Office of Science and Technology Policy's NSTC Web site at: http://www.whitehouse.gov/administration/eop... From the Federal Register Online via the Government Publishing Office OFFICE OF SCIENCE AND TECHNOLOGY POLICY Aeronautics Science and Technology Subcommittee; Committee on Technology; National...

  19. 78 FR 36013 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-06-14

    ... construction of a hotel on the subject 3.03-acre parcel. The aforementioned land is not needed for aeronautical... the construction of a hotel on the subject property. Fair Market Value will be obtained from a long term lease with hotel owner. The use of the revenue generated from the lease of the airport...

  20. Achieving QoS for Aeronautical Telecommunication Networks over Differentiated Services

    Science.gov (United States)

    Bai, Haowei; Atiquzzaman, Mohammed; Ivancic, William

    2001-01-01

    Aeronautical Telecommunication Network (ATN) has been developed by the International Civil Aviation Organization to integrate Air-Ground and Ground-Ground data communication for aeronautical applications into a single network serving Air Traffic Control and Aeronautical Operational Communications. To carry time critical information required for aeronautical applications, ATN provides different Quality of Services (QoS) to applications. ATN has therefore, been designed as a standalone network which implies building an expensive separate network for ATN. However, the cost of operating ATN can be reduced if it can be run over a public network such as the Internet. Although the current Internet does not provide QoS, the next generation Internet is expected to provide QoS to applications. The objective of this paper is to investigate the possibility of providing QoS to ATN applications when it is run over the next generation Internet. Differentiated Services (DiffServ), one of the protocols proposed for the next generation Internet, will allow network service providers to offer different QoS to customers. Our results show that it is possible to provide QoS to ATN applications when they run over a DiffServ backbone.

  1. Aeronautical education and research at the Swiss Institute of Technology in Zurich

    Science.gov (United States)

    Karner, L; Ackeret, J

    1931-01-01

    Progress in the scientific and practical fields of aviation has caused the Swiss Institute of Technology to organize lectures and practical training courses in all three branches of aeronautics and to found centers of scientific research, laboratories, etc., in order to supply the government and industries with scientifically and technically trained engineers.

  2. Comparison of Marketing Techniques to Enroll Females at a Major Aeronautical University

    Science.gov (United States)

    Cross, David Scott

    2012-01-01

    Traditionally, industries belonging to the science, technology, engineering, and mathematics (STEM) fields are dominated by males. Recruitment and enrollment of females for STEM fields have become an issue among universities specializing in fields such as aviation and aeronautics. The research problem for this study was that marketing departments…

  3. 77 FR 21404 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

    Science.gov (United States)

    2012-04-10

    ... (72 FR 67998)) Safair and Lockheed Martin Aeronautics Company (LM Aero) concurred with the proposed... November 14, 2007 (72 FR 64005) (corrected December 3, 2007 (72 FR 67998)). That NPRM proposed to require... (72 FR 64005, November 14, 2007; corrected December ] 3, 2007 (72 FR 67998)) and the FAA's response...

  4. 78 FR 19355 - Announcement of Charter Renewal of the Radio Technical Commission for Aeronautics (RTCA), Inc.

    Science.gov (United States)

    2013-03-29

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Announcement of Charter Renewal of the Radio Technical Commission for Aeronautics (RTCA), Inc. SUMMARY: The FAA is issuing this notice to advise the public of the charter...

  5. 78 FR 52841 - Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes

    Science.gov (United States)

    2013-08-27

    ... Lockheed Martin Corporation/Lockheed Martin Aeronautics Company requested that we revise the NPRM (77 FR... other publications listed in this AD as of August 26, 2005 (70 FR 42262, July 22, 2005). ADDRESSES: For..., Amendment 39-14190 (70 FR 42262, July 22, 2005). AD 2005-15-01 applied to the specified products. The...

  6. [Toxological problems inherent in varnish and paint products used in aeronautics].

    Science.gov (United States)

    Cianetti, E; Bancheri, C

    1977-12-15

    Paint products and the need for their employment on aircraft and spacecraft are described and reference is made to the types of poisoning that may arise from their application. The main solvents and diluents are listed, together with their toxicological features. Lastly, mention is made of technical products required by the aeronautical regulations, the dangers associated with them, and the preventive measures required.

  7. 78 FR 73919 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-12-09

    ... Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999 (64 FR 7696... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... 30 days before modifying the land-use assurance that requires the property to be used for...

  8. 78 FR 10247 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-02-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... be published in the Federal Register 30 days before modifying the land-use assurance that...

  9. 78 FR 10248 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-02-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... be published in the Federal Register 30 days before modifying the land-use assurance that...

  10. 78 FR 38090 - Public Notice for Waiver of Aeronautical Land-Use Assurance

    Science.gov (United States)

    2013-06-25

    ... FR 7696). Tract 1--Subject Portion of Parcel G (Legal Description) That part of the Southwest Quarter... Federal Aviation Administration Public Notice for Waiver of Aeronautical Land-Use Assurance AGENCY... be published in the Federal Register 30 days before modifying the land-use assurance that...

  11. A Portfolio Analysis Tool for Measuring NASAs Aeronautics Research Progress toward Planned Strategic Outcomes

    Science.gov (United States)

    Tahmasebi, Farhad; Pearce, Robert

    2016-01-01

    Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. The strategic planning process for determining the community Outcomes is also briefly described. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples are also presented.

  12. 14 CFR 43.17 - Maintenance, preventive maintenance, and alterations performed on U.S. aeronautical products by...

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maintenance, preventive maintenance, and... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT MAINTENANCE, PREVENTIVE MAINTENANCE, REBUILDING, AND ALTERATION § 43.17 Maintenance, preventive maintenance,...

  13. Exact run length distribution of the double sampling x-bar chart with estimated process parameters

    Directory of Open Access Journals (Sweden)

    Teoh, W. L.

    2016-05-01

    Full Text Available Since the run length distribution is generally highly skewed, a significant concern about focusing too much on the average run length (ARL criterion is that we may miss some crucial information about a control chart’s performance. Thus it is important to investigate the entire run length distribution of a control chart for an in-depth understanding before implementing the chart in process monitoring. In this paper, the percentiles of the run length distribution for the double sampling (DS X chart with estimated process parameters are computed. Knowledge of the percentiles of the run length distribution provides a more comprehensive understanding of the expected behaviour of the run length. This additional information includes the early false alarm, the skewness of the run length distribution, and the median run length (MRL. A comparison of the run length distribution between the optimal ARL-based and MRL-based DS X chart with estimated process parameters is presented in this paper. Examples of applications are given to aid practitioners to select the best design scheme of the DS X chart with estimated process parameters, based on their specific purpose.

  14. Development of an AR chart tool for understanding invisible physical phenomena

    Science.gov (United States)

    Manabe, S.; Mouri, C.; Tenzou, H.; Kasuga, T.; Motoki, K.

    2016-07-01

    The purpose of this study was to develop a tool to overlay a 3D chart on a real measurement field by using ARToolKit library and AR SDK. The tool was also designed to receive measurement data from any device as TCP/IP packets sent through a LAN. The tool is capable of drawing five types of charts; bar, bubble, red-line, spectrum-line and 3D-area. The tool requires a conventional PC, a USB camera, and an AR tag printed on a paper. The AR tag is laid on the measurement area and is recognized as the base level from where to draw the chart. 3D CG objects of the charts are overlaid on the images captured by the USB camera through recognition of the AR tag. A sample code was also prepared to manage DAQ data. The sample code for Windows OS can send the data as CSV text data via TCP/IP to the AR chart tool.

  15. Development of nonlinear acoustic propagation analysis tool toward realization of loud noise environment prediction in aeronautics

    International Nuclear Information System (INIS)

    Shown in this paper is an introduction of a prediction tool for the propagation of loud noise with the application to the aeronautics in mind. The tool, named SPnoise, is based on HOWARD approach, which can express almost exact multidimensionality of the diffraction effect at the cost of back scattering. This paper argues, in particular, the prediction of the effect of atmospheric turbulence on sonic boom as one of the important issues in aeronautics. Thanks to the simple and efficient modeling of the atmospheric turbulence, SPnoise successfully re-creates the feature of the effect, which often emerges in the region just behind the front and rear shock waves in the sonic boom signature

  16. A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid networks, the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver's advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.

  17. A method for the analysis of the benefits and costs for aeronautical research and technology

    Science.gov (United States)

    Williams, L. J.; Hoy, H. H.; Anderson, J. L.

    1978-01-01

    A relatively simple, consistent, and reasonable methodology for performing cost-benefit analyses which can be used to guide, justify, and explain investments in aeronautical research and technology is presented. The elements of this methodology (labeled ABC-ART for the Analysis of the Benefits and Costs of Aeronautical Research and Technology) include estimation of aircraft markets; manufacturer costs and return on investment versus aircraft price; airline costs and return on investment versus aircraft price and passenger yield; and potential system benefits--fuel savings, cost savings, and noise reduction. The application of this methodology is explained using the introduction of an advanced turboprop powered transport aircraft in the medium range market in 1978 as an example.

  18. Development of nonlinear acoustic propagation analysis tool toward realization of loud noise environment prediction in aeronautics

    Energy Technology Data Exchange (ETDEWEB)

    Kanamori, Masashi, E-mail: kanamori.masashi@jaxa.jp; Takahashi, Takashi, E-mail: takahashi.takashi@jaxa.jp; Aoyama, Takashi, E-mail: aoyama.takashi@jaxa.jp [Japan Aerospace Exploration Agency, 7-44-1, Jindaijihigashi-machi, Chofu, Tokyo (Japan)

    2015-10-28

    Shown in this paper is an introduction of a prediction tool for the propagation of loud noise with the application to the aeronautics in mind. The tool, named SPnoise, is based on HOWARD approach, which can express almost exact multidimensionality of the diffraction effect at the cost of back scattering. This paper argues, in particular, the prediction of the effect of atmospheric turbulence on sonic boom as one of the important issues in aeronautics. Thanks to the simple and efficient modeling of the atmospheric turbulence, SPnoise successfully re-creates the feature of the effect, which often emerges in the region just behind the front and rear shock waves in the sonic boom signature.

  19. Implementation of Electronic Commerce in the Department of Defense and the National Aeronautics and Space Administration

    OpenAIRE

    Gray, Rodney A.

    1996-01-01

    President Clinton's Executive Memorandum of 26 October 1993 mandated that all Federal Government agencies implement Electronic Commerce (EC) in order to 'simplify and streamline the purchasing process.' Two agencies, the Department of Defense (DoD) and the National Aeronautics and Space Administration (NASA) employed divergent strategies and policies in implementing the President's Memorandum. The DoD pursued a strategy using an existing DoD electronic Commerce/Electronic Data Interchange (EC...

  20. Improving the vacuum-infusion process to manufacture high quality structural composite for the aeronautic market

    OpenAIRE

    Oliveira, Luís; Nunes, J. P.; F. Ferreira

    2014-01-01

    In last years, the vacuum-infusion processing method is being replacing successfully autoclave technologies to manufacture advanced composite structures, namely, the carbon-fibre reinforced plastic (CFRP) ones, for aeronautical and aerospace applications. The high investment associated with autoclave “prepreg” manufacturing has prompted interest in the use of alternative vacuum-infusion technologies that proven to be much more cost-effective processing methods. The present work presents, desc...

  1. Profile of software engineering within the National Aeronautics and Space Administration (NASA)

    Science.gov (United States)

    Sinclair, Craig C.; Jeletic, Kellyann F.

    1994-01-01

    This paper presents findings of baselining activities being performed to characterize software practices within the National Aeronautics and Space Administration. It describes how such baseline findings might be used to focus software process improvement activities. Finally, based on the findings to date, it presents specific recommendations in focusing future NASA software process improvement efforts. The findings presented in this paper are based on data gathered and analyzed to date. As such, the quantitative data presented in this paper are preliminary in nature.

  2. Power Output and Air Requirements of a Two-stroke Cycle Engine for Aeronautical Use

    Science.gov (United States)

    Paton, C R; Kemper, Carlton

    1927-01-01

    This investigation was undertaken to determine the pressure and amount of air necessary for satisfactory high-speed, two-stroke cycle operation and thus permit the power requirements of the air pump or blower to be determined. Based on power output and air requirement here obtained the two-stroke cycle engine would seem to be favorable for aeronautical use. No attempts were made to secure satisfactory operation at idling speeds.

  3. CHINESE JOURNAL OF AERONAUTICS STARTS TO SET A WEBSITE FOR EACH OF ITS PUBLISHED PAPER

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@ In order to better meet the need of current scientific and technological community on information exchange, by taking advantage of the Internet, beginning from the first issue of the year 2000, Chinese Journal of Aeronautics (CJA) and Acta Aeronautica et Astronautica Sinica (AAAS) start to set a website for each of their published papers, which is referred to as "Article URL" and is typeset and printed at the lowest left corner of the footnote on the first page of that paper.

  4. Analysis of technological innovation strategy for small and medium companies of the aeronautical sector

    OpenAIRE

    Marcela Barbosa de Moraes; Francisco Cristovão L. Melo; Edson A. A. Querido Oliveira; Arnoldo Souza Cabral

    2010-01-01

    The inherent risk in high-tech activity requires the construction of technological strategies that serve global strategy of the company. The present study aimed to characterize the technological position of small and medium technology-based companies of the aeronautical sector located in the Vale do Paraíba, and to examine whether these companies have a technological strategy formalized and disseminated. The adopted methodology was a descriptive exploratory research, carried out through in-de...

  5. Accessing the Global Value Chain in a Changing Institutional Environment: Comparing Aeronautics and Coffee

    OpenAIRE

    Cafaggi, Fabrizio; Swensson, Luana F. Joppert; Macedo, Ronaldo Porto; ANDREOTTI E SILVA, Tiago; Piterman Gross, Clarissa; Gabriel de Almeida, Lucila; Alves Ribeiro, Thiago

    2012-01-01

    The aim of the paper, based on empirical research in Brazil, is to investigate how supply chains have evolved over time, what factors have driven this evolution and also how a specific set of contractual practices along these chains is linked to access to international markets. The two selected case studies in the field of agriculture and aeronautics permit comparison between different modes of accessing international markets and GVCs; they illustrate the roles of transnational corporations a...

  6. Application of non destructive testing to the detection of aeronautical defects in composite structure

    OpenAIRE

    Munoz Cuartas, Victor; Perrin, Marianne; Pastor, Marie-Laetitia; Welemane, Hélène; Cantarel, Arthur; Karama, Moussa

    2013-01-01

    A study of two Non-destructive Testing methods (NDT) was carried out in specimens with different kinds of simulated defects. Ultrasonics test (US) and Infrared Thermography (IRT) were applied with the aim to evaluate the detectability and the accuracy of each method. These techniques have acquired great importance in the aeronautics industry because they allow to control the aerostructures without intervening in their physical and mechanical integrity. In the second part of the study, a compa...

  7. Databases on aerospace and aeronautics - Roles of NASA and its online retrieval took part -

    Science.gov (United States)

    Nakamoto, Hideshiro

    This article reports a great role of NASA's efforts in the course of developments on database, which exploited from abstract journals to machine readable files and from batch services to on-line services. An attention should be paid to that NASA contributed to industries with their technology through Regional Dissemination Centers. It also presents review of various databases in U.S. and Europe, such as bibliographies, computer programs, parts, satellites, newsletters on aerospace and aeronautics.

  8. Some vortical-flow flight experiments on slender aircraft that impacted the advancement of aeronautics

    Science.gov (United States)

    Lamar, John E.

    2009-08-01

    This paper highlights the three aerodynamic pillars of aeronautics; namely, theory/CFD, wind-tunnel experiments and flight tests, and notes that at any given time these three are not necessarily at the same level of maturity. After an initial history of these three pillars, the focus narrows to a brief history of some vortical-flow flight experiments on slender aircraft that have impacted the advancement of aeronautics in recent decades. They include the F-106, Concorde, SR-71, light-weight fighters (F-16, F/A-18), and F-16XL. These aircraft share in common the utilization of vortical flow and have flown at transonic speeds during a part of the flight envelope. Due to the vast amount of information from flight and CFD that has recently become available for the F-16XL, this aircraft is highlighted and its results detailed. Lastly, it is interesting to note that, though complicated, vortical flows over the F-16XL aircraft at subsonic speeds can be reliably and generally well-predicted with the current CFD flow solvers. However, these solvers still have some problems in matching flight pressure data at transonic speeds. That this problem has been highlighted is both an advancement in aeronautics and a tempting prize to those who would seek its solution.

  9. EFFECTS OF RICIAN FADING ON THE OPERATION OF AERONAUTICAL SATELLITE OFDM CHANNEL

    Directory of Open Access Journals (Sweden)

    Volodymyr Kharchenko

    2016-06-01

    Full Text Available The aim of this study is to investigate the influence of Rician fading on messages transmission via the aeronautical satellite OFDM channel with adaptive modulation and the development of a method for estimating the parameters of such a channel. Methods: To study the effect of Rician fading on messages transmission via aeronautical satellite OFDM channel with adaptive modulation the original model of the communication channel “Aircraft-Satellite-Ground Station” was built using software package MATLAB Sіmulіnk. The model includes “Aircraft Transmitter”, “Uplink/Downlink Path”, “Satellite Transponder”, and “Ground Station Receiver”. Each modulator block in the modulation bank performs convolutional coding and puncturing using code rates of ½, ²/3, and ¾, data interleaving, BPSK, QPSK, 16-QAM, and 64-QAM modulation. Results: Dependences of Estimated channel SNR on the ratio between the power of the LOS component and the diffuse component, on the downlink gain and delay in the diffuse component for different Doppler spectrum types and Doppler frequency offsets were obtained. A method for estimating the parameters of the satellite channels with fading was proposed. Discussion: The realistic model of aeronautical satellite OFDM link with Rician fading is developed for the first time on a basis of IEEE 802.11a standard and used for channel parameters evaluation. Proposed in this article approach can be considered as a method for estimating parameters of the channel with fading.

  10. Mobile Ad-Hoc Network Based Relaying Data System for Oceanic Flight Routes in Aeronautical Communications

    Directory of Open Access Journals (Sweden)

    Ho Dac Tu

    2009-04-01

    Full Text Available This paper proposes a reliable system to overcome the weakness of current the HF radio communicationsystem for oceanic aeronautical flight routes. This system uses only one aeronautical VHF channel with air-toairradio relay system based on local mobile Ad-hoc networks. For access to/from all aircrafts in the system, aTDMA (Time Division Multiple Access scheme is proposed to be used where each aircraft is assigned onetime slot during its presence in the system in order to transmit its own packet by itself or relay them usingneighbouring aircrafts. These packets contain aircraft position, ID, relative direction which are used to build arouting table at each aircraft. In addition, several algorithms for relaying packets; schemes to reduce thepacket-loss-ratio as well as to reduce the interference caused by surrounding aircrafts have been proposed.The simulations have shown the improvement of such proposals when examining system performance underreal air-traffic scenarios. This system strengthens the reliability of oceanic aeronautical communication andincreases situational awareness of all oceanic flights as an effective solution to operate more flights on theocean but in higher safety.

  11. Simple circular odor chart for characterization of trace amounts of odorants discharged from thirteen odor sources

    Energy Technology Data Exchange (ETDEWEB)

    Hoshika, Y.; Nihei, Y.; Muto, G.

    1981-04-01

    A simple circular odor chart is proposed for the explanation of the relationship between sensory responses (to odor quality and intensity) to odors and chemical analysis data of the odorants responsible for each odor discharged from thirteen odor sources. The odorants were classified into eight odorant groups and were analyzed by a systematic gas chromatographic (GC) technique. The characterization of the trace amounts of the odorants was carried out by using the values of a new proposed unit (pOU) based on the ratio of detected concentration to recognition threshold value. The calculated pOU values of the eight groups were plotted in circular charts. It was found that the shape and size of each circular odor chart represent the quality and the intensity of each odor.

  12. Poor predictive ability of the risk chart SCORE in a Danish population

    DEFF Research Database (Denmark)

    Saidj, Madina; Jørgensen, Torben; Prescott, Eva;

    2013-01-01

    In Denmark, the European risk chart Systematic COronary Risk Evaluation (SCORE) from the European Society of Cardiology is recommended for use in cardiovascular prevention. Nevertheless, its predictive ability in a Danish population has never been investigated. The purpose of this study was there...... was therefore to assess the predictive ability of the SCORE risk chart with regard to fatal cardiovascular risk according to the socio-demographic factors of age, sex, income and education in a Danish population.......In Denmark, the European risk chart Systematic COronary Risk Evaluation (SCORE) from the European Society of Cardiology is recommended for use in cardiovascular prevention. Nevertheless, its predictive ability in a Danish population has never been investigated. The purpose of this study...

  13. Determination of Egg Shell Quality with P Control Charts in Poultry

    Directory of Open Access Journals (Sweden)

    Melis Çelik Güney

    2016-07-01

    Full Text Available Broken or cracked eggs are important factor in determining the quality of the egg shell. Manufacturers are experience great losses because broken or cracked eggs aren’t evaluated. The manufacturers need control charts throughout the production to determine whether process is under control. In this study, broken and cracked eggs which are taken Cukurova University, Faculty of Agriculture, Department of Animal Science, Poultry Businesses during 52 weeks are determined. P control charts of the data’s are taken in poultry business during 52 weeks is drawn due to determining whether there is under the control. Three methods were used for drawing control charts. In the end of this study, it has been determined to be not under control of the process.

  14. Prospective Evaluation of Visual Acuity Assessment: A Comparison of Snellen Versus ETDRS Charts in Clinical Practice (An AOS Thesis)

    Science.gov (United States)

    Kaiser, Peter K.

    2009-01-01

    Purpose: The purpose of this study was twofold: first, to prospectively compare visual acuity (VA) scores obtained with Snellen charts versus Early Treatment Diabetic Retinopathy Study (ETDRS) charts in a “real world” retinal practice, and second, to see if there was a difference in visual acuity measurements obtained with ETDRS charts starting at 4 or 2 meters. Methods: Prospective, consecutive evaluation of patients who underwent best-corrected visual acuity testing of their right eye performed at a single seating by the same experienced, certified vision examiner in the same room with standardized low light conditions using a projected Snellen chart at 20 feet, and two different back-illuminated ETDRS charts placed 4 and 2 meters from the patient. Results: One hundred sixty-three eyes were included in the study. The mean Snellen VA was 0.67 logMAR (20/94), ETDRS VA at 4 meters was 0.54 logMAR (~20/69), and ETDRS VA at 2 meters was 0.51 logMAR (~20/65). The mean difference was 6.5 letters better on the ETDRS chart (P=.000000001). As the VA worsened, there was increased variability between the charts and the mean discrepancy between charts also increased. Subgroup analysis revealed the greatest difference between charts was in the poor vision subgroup (<20/200) with a difference of 0.2 logMAR (10 letters; P=.0000002). Patients with exudative age-related macular degeneration (AMD) had the greatest disparity on vision testing, but patients with dry AMD and diabetic retinopathy also exhibited significant differences. Conclusions: Visual acuity scores were significantly better on ETDRS charts compared to Snellen charts. The difference was greatest with poor visual acuity (<20/200) and in patients with exudative AMD. Thus, caution should be exercised when comparing data using the different charts. PMID:20126505

  15. Predicting 10-Year Risk of Fatal Cardiovascular Disease in Germany: An Update Based on the SCORE-Deutschland Risk Charts.

    Science.gov (United States)

    Rücker, Viktoria; Keil, Ulrich; Fitzgerald, Anthony P; Malzahn, Uwe; Prugger, Christof; Ertl, Georg; Heuschmann, Peter U; Neuhauser, Hannelore

    2016-01-01

    Estimation of absolute risk of cardiovascular disease (CVD), preferably with population-specific risk charts, has become a cornerstone of CVD primary prevention. Regular recalibration of risk charts may be necessary due to decreasing CVD rates and CVD risk factor levels. The SCORE risk charts for fatal CVD risk assessment were first calibrated for Germany with 1998 risk factor level data and 1999 mortality statistics. We present an update of these risk charts based on the SCORE methodology including estimates of relative risks from SCORE, risk factor levels from the German Health Interview and Examination Survey for Adults 2008-11 (DEGS1) and official mortality statistics from 2012. Competing risks methods were applied and estimates were independently validated. Updated risk charts were calculated based on cholesterol, smoking, systolic blood pressure risk factor levels, sex and 5-year age-groups. The absolute 10-year risk estimates of fatal CVD were lower according to the updated risk charts compared to the first calibration for Germany. In a nationwide sample of 3062 adults aged 40-65 years free of major CVD from DEGS1, the mean 10-year risk of fatal CVD estimated by the updated charts was lower by 29% and the estimated proportion of high risk people (10-year risk > = 5%) by 50% compared to the older risk charts. This recalibration shows a need for regular updates of risk charts according to changes in mortality and risk factor levels in order to sustain the identification of people with a high CVD risk. PMID:27612145

  16. Predicting 10-Year Risk of Fatal Cardiovascular Disease in Germany: An Update Based on the SCORE-Deutschland Risk Charts

    Science.gov (United States)

    Rücker, Viktoria; Keil, Ulrich; Fitzgerald, Anthony P; Malzahn, Uwe; Prugger, Christof; Ertl, Georg; Heuschmann, Peter U; Neuhauser, Hannelore

    2016-01-01

    Estimation of absolute risk of cardiovascular disease (CVD), preferably with population-specific risk charts, has become a cornerstone of CVD primary prevention. Regular recalibration of risk charts may be necessary due to decreasing CVD rates and CVD risk factor levels. The SCORE risk charts for fatal CVD risk assessment were first calibrated for Germany with 1998 risk factor level data and 1999 mortality statistics. We present an update of these risk charts based on the SCORE methodology including estimates of relative risks from SCORE, risk factor levels from the German Health Interview and Examination Survey for Adults 2008–11 (DEGS1) and official mortality statistics from 2012. Competing risks methods were applied and estimates were independently validated. Updated risk charts were calculated based on cholesterol, smoking, systolic blood pressure risk factor levels, sex and 5-year age-groups. The absolute 10-year risk estimates of fatal CVD were lower according to the updated risk charts compared to the first calibration for Germany. In a nationwide sample of 3062 adults aged 40–65 years free of major CVD from DEGS1, the mean 10-year risk of fatal CVD estimated by the updated charts was lower by 29% and the estimated proportion of high risk people (10-year risk > = 5%) by 50% compared to the older risk charts. This recalibration shows a need for regular updates of risk charts according to changes in mortality and risk factor levels in order to sustain the identification of people with a high CVD risk. PMID:27612145

  17. Trading Signal Generation Using A Combination of Chart Patterns and Indicators

    Directory of Open Access Journals (Sweden)

    Chalothon Chootong

    2012-11-01

    Full Text Available Chart patterns and indicators are popular technical tools for making investment decisions. This article presents a trading strategy combining price movement patterns, candlestick chart patterns, and trading indicators, including Moving Average, Exponential Moving Average, Bollinger Bands, On Balance Volume, Relative Strength Index, Moving Average Convergence Divergence, and Stochastic Oscillator, with the aim to increase the return on investment. A neural network ensemble is employed to determine buy and sell signals on the next trading day. Experimental results, using stocks from five different industries in Stock Exchange of Thailand, show that the proposed strategy yields higher returns than do traditional technical trading methods

  18. Derivation of charts for determining the horizontal tail load variation with any elevator motion

    Science.gov (United States)

    Pearson, Henry A

    1943-01-01

    The equations relating the wing and tail loads are derived for a unit elevator displacement. These equations are then converted into a nondimensional form and charts are given by which the wing- and tail-load-increment variation may be determined under dynamic conditions for any type of elevator motion and for various degrees of airplane stability. In order to illustrate the use of the charts, several examples are included in which the wing and tail loads are evaluated for a number of types of elevator motion. Methods are given for determining the necessary derivatives from results of wind-tunnel tests when such tests are available.

  19. An Improved Multivariate T2 Control Chart for Individual Observations in Low Volume Manufacturing

    Institute of Scientific and Technical Information of China (English)

    Miao Rui(苗瑞); Wang Dongpeng; Yao Yingxue

    2004-01-01

    For multivariate statistical process quality control with individual observations, the usually recommended procedure is Hotelling's T2 control chart. Using the T2 statistic based on β distribution is an exact method for constructing multivariate control limits in low volume manufacturing, but it is not convenient in that the variation of sample size leads to a change in control limit. This paper presents an improved multivariate T2 control chart whose control limit does not change with sample size, which is especially useful when the sample size is small.

  20. DASHBOARDS AND CONTROL CHARTS. EXPERIENCES IN IMPROVING SAFETY AT HANFORD WASHINGTON

    International Nuclear Information System (INIS)

    The aim of this paper is to demonstrate the integration of safety methodology, quality tools, leadership, and teamwork at Hanford and their significant positive impact on safe performance of work. Dashboards, Leading Indicators, Control charts, Pareto Charts, Dr. W. Edward Deming's Red Bead Experiment, and Dr. Deming's System of Profound Knowledge have been the principal tools and theory of an integrated management system. Coupled with involved leadership and teamwork, they have led to significant improvements in worker safety and protection, and environmental restoration at one of the nation's largest nuclear cleanup sites

  1. Comparison of visual acuity results in preschool children with lea symbols and bailey-lovie e chart

    Directory of Open Access Journals (Sweden)

    Nijil Sanker

    2013-01-01

    Full Text Available Purpose: To compare visual acuity with two visual acuity charts in preschool children. Materials and Methods: Visual acuity measurement with Lea symbols and Bailey-Lovie tumbling E chart was performed on children between 3 and 6 years of age. Visual acuity data from the two charts were analyzed with Bland-Altman plot to determine the limits of agreement. The Wilcoxon signed test was performed in children aged 3-4 years and in children aged 5-6 years separately to evaluate the influence of age. The inter-eye difference between the two charts were further analyzed with the paired t-test. A p value < 0.05 was considered statistically significant. Results: A total of 47 children were enrolled for the study. The average logarithm of the Minimum Angle of Resolution (LogMAR monocular visual acuity with Lea symbols (0.17 ± 0.13 was better than the Bailey-Lovie tumbling E chart (0.22 ± 0.14. The mean difference between Bailey-Lovie tumbling E chart and Lea symbol chart was 0.05 ± 0.12 in logMAR units. A second analysis eliminating outliers showed the same result but lower differences (n = 43, 0.05 ± 0.05 logMAR units. Visual acuity results between the two charts in children aged 3-4 years showed a significant difference (p = 0.000, but not for children aged 5-6 years (p = 0.059. Inter-eye differences between the two charts was not statistically significant (p = 0.77. Conclusion: Bailey-Lovie tumbling E chart is comparable to the Lea symbols chart in pre-school children. But preference should be given to Lea symbols for children aged 3-4 years as the symbols are more familiar than a directional test for this age group.

  2. Simple acupoints prescription flow chart based on meridian theory: a retrospective study in 102 dogs.

    Science.gov (United States)

    Jeong, Jong-Ho; Song, Joo-Young; Jo, Hyo-Gwon; Kim, Ji-Min; Yoon, Samuel-S; Park, Chul; Kim, Seunghyun; Roh, Seong-Soo; Lee, Bong Hyo; Yang, Chae Ha; Kim, Hee Young

    2013-01-01

    To help the clinicians prescribe acupoints easily and effectively, we developed one simple flow chart to select acupoints. This study aimed to evaluate the usefulness of flow chart to select acupoints in dogs. Total 102 dogs showing intervertebral disc disease (IVDD) (n = 12), vomiting (n = 11), diarrhea (n = 2), abdominal pain (n = 5), cough (n = 66), or epilepsy (n = 6) received acupuncture treatment according to the chart, and its outcomes were evaluated as regards clinical symptoms, duration, treatment numbers, and recovery time. Dogs (8/8) with IVDD from grades I to III recovered over periods of 5 days to 6 weeks after 1-12 treatments, while 1/4 dogs with grade IV recovered over 7 weeks after 15 treatments. Vomiting dogs with acute/subacute (n = 8) and chronic symptoms (n = 3) required about 1 and 7 treatments to recover fully, respectively. All dogs (n = 5) with abdominal pain showed fast relief within 24 hours after acupuncture. Two diarrhea cases recovered over 2-9 days after 1-2 treatments. Fifty-four of 66 coughing dogs were recovered by 1-2 treatments. And 5 of 6 epilepsy dogs under a regular acupuncture treatment had no epileptic episode during followup of 12 months. These results suggest that this flow chart can help the clinicians prescribe acupoints effectively.

  3. Ocenění podniku Chart Ferox, a.s.

    OpenAIRE

    Zeidler, Marek

    2009-01-01

    The thesis estimates the value of equity per share of the company Chart Ferox, a.s. for informational purposes of shareholders and management. The valuation is done through the DCF FCFE model. Prior to the financial plan and the valuation itself, the theses provides financial and strategic analysis of the company.

  4. Charting Cartographies of Resistance: Lines of Flight in Women Artists' Narratives

    Science.gov (United States)

    Tamboukou, Maria

    2010-01-01

    In this paper I chart lines of flight in women artist's narratives. In focusing on the complex interrelations between the social milieus of education and art, what I suggest is that they should be analysed as an "assemblage" where power relations and forces of desire are constantly at play in creating conditions of possibility for women to resist,…

  5. Determining Role of Temperature Chart while Evaluating Specific Expenses of Organic Fuel

    OpenAIRE

    A. P. Nesenchouk; T. V. Ryzhova; S. S. Kovalev; V. I. Tchernyshevitch; V. V. Shidlovsky

    2014-01-01

    The paper considers designing principles of operational space continuous heating and heat-treating furnaces at mechanical engineering, automotive and tractor enterprises in theRepublicofBelarus. A role of temperature chart on heating metallic charge while evaluating specific expenses of organic fuel in heating and heat-treating furnaces of mechanical engineering, automotive and tractor industries. 

  6. U.S. Nuclear Regulatory Commission organization charts and functional statements. Revision 18

    International Nuclear Information System (INIS)

    This document (NUREG-0325) is the current US NRC organization chart, listing all NRC offices and regions and their components down through the branch level as of July 23, 1995. Functional statements of each position are given, as is the name of the individual holding the position

  7. 75 FR 11938 - Chart Energy and Chemicals, Inc., La Crosse, WI; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Chart Energy and Chemicals, Inc., La Crosse, WI; Notice of Termination of Investigation Pursuant to Section 223 of the Trade Act of 1974, as amended, an investigation was initiated in response to a petition filed...

  8. 78 FR 6357 - Submission for Renewal: New Information Collection, Fingerprint Chart Standard Form 87 (SF 87)

    Science.gov (United States)

    2013-01-30

    ... MANAGEMENT Submission for Renewal: New Information Collection, Fingerprint Chart Standard Form 87 (SF 87... (SF 87). As required by the Paperwork Reduction Act of 1995, (Pub. L. 104-13, 44 U.S.C. chapter 35) as... . SUPPLEMENTARY INFORMATION: The SF 87 is a fingerprint card, which is utilized to conduct a national...

  9. Information Landscaping: Information Mapping, Charting, Querying and Reporting Techniques for Total Quality Knowledge Management.

    Science.gov (United States)

    Tsai, Bor-sheng

    2003-01-01

    Total quality management and knowledge management are merged and used as a conceptual model to direct and develop information landscaping techniques through the coordination of information mapping, charting, querying, and reporting. Goals included: merge citation analysis and data mining, and apply data visualization and information architecture…

  10. Serial correlation of quality control data--on the use of proper control charts

    DEFF Research Database (Denmark)

    Winkel, P; Zhang, Nevin

    2004-01-01

    Biochemical quality control (QC) data have been reported to be autocorrelated. Serial correlation may increase the rate of false alarms if the traditional exponentially weighted moving average (EWMA) control chart to monitoring the process mean is used. False alarms are the focus of this paper......, where an alarm is defined as the occurrence of a QC value outside the three standard deviation control limits....

  11. Simple Acupoints Prescription Flow Chart Based on Meridian Theory: A Retrospective Study in 102 Dogs

    Directory of Open Access Journals (Sweden)

    Jong-Ho Jeong

    2013-01-01

    Full Text Available To help the clinicians prescribe acupoints easily and effectively, we developed one simple flow chart to select acupoints. This study aimed to evaluate the usefulness of flow chart to select acupoints in dogs. Total 102 dogs showing intervertebral disc disease (IVDD (n=12, vomiting (n=11, diarrhea (n=2, abdominal pain (n=5, cough (n=66, or epilepsy (n=6 received acupuncture treatment according to the chart, and its outcomes were evaluated as regards clinical symptoms, duration, treatment numbers, and recovery time. Dogs (8/8 with IVDD from grades I to III recovered over periods of 5 days to 6 weeks after 1–12 treatments, while 1/4 dogs with grade IV recovered over 7 weeks after 15 treatments. Vomiting dogs with acute/subacute (n=8 and chronic symptoms (n=3 required about 1 and 7 treatments to recover fully, respectively. All dogs (n=5 with abdominal pain showed fast relief within 24 hours after acupuncture. Two diarrhea cases recovered over 2–9 days after 1-2 treatments. Fifty-four of 66 coughing dogs were recovered by 1-2 treatments. And 5 of 6 epilepsy dogs under a regular acupuncture treatment had no epileptic episode during followup of 12 months. These results suggest that this flow chart can help the clinicians prescribe acupoints effectively.

  12. Loxapine for Reversal of Antipsychotic-Induced Metabolic Disturbances: A Chart Review

    Science.gov (United States)

    Jain, Seema; Andridge, Rebecca; Hellings, Jessica A.

    2016-01-01

    Loxapine substitution is a promising option for patients with autism spectrum disorder (ASD) who develop antipsychotic-induced metabolic illness. We performed a chart review of 15 adolescents and adults meeting DSM-IV-TR criteria for ASD, all with antipsychotic-associated weight gain, who received low dose loxapine in an attempt to taper or…

  13. Determining Role of Temperature Chart while Evaluating Specific Expenses of Organic Fuel

    Directory of Open Access Journals (Sweden)

    A. P. Nesenchouk

    2009-01-01

    Full Text Available The paper considers designing principles of operational space continuous heating and heat-treating furnaces at mechanical engineering, automotive and tractor enterprises in theRepublicofBelarus. A role of temperature chart on heating metallic charge while evaluating specific expenses of organic fuel in heating and heat-treating furnaces of mechanical engineering, automotive and tractor industries. 

  14. Charting the Effects of Improving Instruction: College Seniors Learning to Write Lesson Plans

    Science.gov (United States)

    Pass, Susan

    2006-01-01

    The purpose of this article is to chart improvement in student achievement by use of a new teaching strategy. An additional goal is to discover if an increase in student achievement might also increase students' interest, motivation, and sense of value in learning the subject (in this case, secondary social studies education). A third goal is to…

  15. Introducing Google Chart Tools and Google Maps API in data visualization courses.

    Science.gov (United States)

    Zhu, Ying

    2012-01-01

    This article reports the experience of using Google Chart Tools and Google Maps in a data visualization course at Georgia State University. These visualization toolkits have many benefits but haven't been widely used in such courses. Students found them easy to use for creating a variety of interactive data visualizations.

  16. Charts for Weight Loss to Detect Hypernatremic Dehydration and Prevent Formula Supplementing

    NARCIS (Netherlands)

    Dommelen, P. van; Boer, S.; Unal, S.; Wouwe, J.P. van

    2014-01-01

    BACKGROUND: Most breast-fed newborns get the milk they need. However, very rarely milk intake is insufficient mostly as a result of poor breastfeeding techniques. Dramatic weight loss and hypernatremic dehydration may occur. Our aim was to construct charts for weight loss. METHODS: A case-control st

  17. U.S. Nuclear Regulatory Commission organization charts and functional statements. Revision 18

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-23

    This document (NUREG-0325) is the current US NRC organization chart, listing all NRC offices and regions and their components down through the branch level as of July 23, 1995. Functional statements of each position are given, as is the name of the individual holding the position.

  18. US Nuclear Regulatory Commission organization charts and functional statements. Revision 17

    International Nuclear Information System (INIS)

    This document is a detailed organizational chart detailing the different staffing and board offices. They include: the commission, the several committees and boards, the commission staff offices, the office of the Inspector General, the executive director for operations and staff offices, and the regional and program offices

  19. Seasonal ARMA-based SPC charts for anomaly detection: Application to emergency department systems

    KAUST Repository

    Kadri, Farid

    2015-10-22

    Monitoring complex production systems is primordial to ensure management, reliability and safety as well as maintaining the desired product quality. Early detection of emergent abnormal behaviour in monitored systems allows pre-emptive action to prevent more serious consequences, to improve system operations and to reduce manufacturing and/or service costs. This study reports the design of a new methodology for the detection of abnormal situations based on the integration of time-series analysis models and statistical process control (SPC) tools for the joint development of a monitoring system to help supervising of the behaviour of emergency department services (EDs). The monitoring system developed is able to provide early alerts in the event of abnormal situations. The seasonal autoregressive moving average (SARMA)-based exponentially weighted moving average (EWMA) anomaly detection scheme proposed was successfully applied to the practical data collected from the database of the paediatric emergency department (PED) at Lille regional hospital centre, France. The method developed utilizes SARMA as a modelling framework and EWMA for anomaly detection. The EWMA control chart is applied to the uncorrelated residuals obtained from the SARMA model. The detection results of the EWMA chart are compared with two other commonly applied residual-based tests: a Shewhart individuals chart and a Cumulative Sum (CUSUM) control chart.

  20. 33 CFR 209.310 - Representation of submarine cables and pipelines on nautical charts.

    Science.gov (United States)

    2010-07-01

    ... submarine cable and pipelines to the National Oceanic and Atmospheric Administration (NOAA), National Ocean... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Representation of submarine... of submarine cables and pipelines on nautical charts. (a) The policy of the Corps of Engineers...

  1. Intellectual Property Rights at the National Aeronautics and Space Administration, Lewis Research Center

    Science.gov (United States)

    Williams, Vernon E.

    1994-01-01

    At a fundamental level, intellectual property is the core work product of a technical organization. The National Aeronautics and Space Administration (NASA), produces a variety of intellectual property including: patents, trademarks, data rights, copyright and rights associated with National Security. For a scientific organization to properly manage its work product it has to manage its intellectual property. This paper endeavors to describe how the intellectual property rights are generated and allocated at NASA. The author then goes on to discuss how the intellectual property might be managed to meet the objectives of program implementation, technology transfer and security.

  2. The production of the AGARD multilingual aeronautical dictionary using computer techniques

    Science.gov (United States)

    Wente, V. A.; Kirschbaum, J. C.; Kuney, J. H.

    1981-01-01

    The AGARD Multilingual Aeronautical Dictionary (MAD) contained 7,300 technical terms defined in English but also translated into nine other languages. The preparation work was performed by some 250 scientists and engineers who were members of AGARD and involved the translation skills of staff in many of the NATO nations. Nearly all the compilation and setting work for the book was done by computer and automatic photo-composition. The purpose of this publication is to record how the task was approached in terms of management planning.

  3. A Tool for Measuring NASA's Aeronautics Research Progress Toward Planned Strategic Community Outcomes

    Science.gov (United States)

    Tahmasebi, Farhad; Pearce, Robert

    2016-01-01

    Description of a tool for portfolio analysis of NASA's Aeronautics research progress toward planned community strategic Outcomes is presented. For efficiency and speed, the tool takes advantage of a function developed in Excels Visual Basic for Applications. The strategic planning process for determining the community Outcomes is also briefly discussed. Stakeholder buy-in, partnership performance, progress of supporting Technical Challenges, and enablement forecast are used as the criteria for evaluating progress toward Outcomes. A few illustrative examples of using the tool are also presented.

  4. Application of the Pareto chart and Ishikawa diagram for the identification of major defects in metal composite castings

    Directory of Open Access Journals (Sweden)

    K. Gawdzińska

    2011-04-01

    Full Text Available This author discusses the use of selected quality management tools, i.e. the Pareto chart and Ishikawa fishbone diagram, for the descriptionof composite casting defects. The Pareto chart allows to determine defect priority related with metallic composite castings, while theIshikawa diagram indicates the causes of defect formation and enables calculating defect weights.

  5. Application of the Pareto chart and Ishikawa diagram for the identification of major defects in metal composite castings

    OpenAIRE

    K. Gawdzińska

    2011-01-01

    This author discusses the use of selected quality management tools, i.e. the Pareto chart and Ishikawa fishbone diagram, for the descriptionof composite casting defects. The Pareto chart allows to determine defect priority related with metallic composite castings, while theIshikawa diagram indicates the causes of defect formation and enables calculating defect weights.

  6. The solar chart for designing shading devices for Tripoli City, Libya

    International Nuclear Information System (INIS)

    Due to lake of standardized methods to design and validate sun shading devices in Libya, this study aims at developing a solar chart, which can be used as a practical and systematic methodology for designing sun-shading devices in the city of Tripoli. In order to achieve the objective of this study, this paper was divided into five sections. The first section is dealing with a focused literature with respect to types of shading devices and their impact on the exterior wall opening, the person of the sun, sun's altitudes azimuths and how to mathematically be determined; the sun charts, and the shading calculator. While the second section was dedicated for the determination of the overheated periods over the year in which shading devices should be in place. The third section presents a computer software developed in order to automatically calculate the sun angles (Altitudes and Azimuth angles). The north latitude of 32.59 was chosen as a validation example. By using the statgraphics software, the output data were analyzed and illustrated in a solar chart that presents the equinox, summer and winter solstices. The resulted solar chart serves as a tool, which will jointly be used with the shading chart to design accurate shading devices for the chosen North latitude 32.59. The forth section explains the methodology of selecting an effective solar altitude and azimuth angles which an architect would on while designing sun shading devices. The fifth section, identifies and lists the methodology of designing each type of shading devices in the city of Tripoli. Libya. Finally, study conclusions were drawn, and further research studies were recommended to enhance the finding of this research paper. (author)

  7. Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

    Science.gov (United States)

    Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

    2004-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

  8. A correction factor to f-chart predictions of active solar fraction in active-passive heating systems

    Science.gov (United States)

    Evans, B. L.; Beckman, W. A.; Duffie, J. A.; Mitchell, J. W.; Klein, S. A.

    1983-11-01

    The extent to which a passive system degrades the performance of an active solar space heating system was investigated, and a correction factor to account for these interactions was developed. The transient system simulation program TRNSYS is used to simulate the hour-by-hour performance of combined active-passive (hybrid) space heating systems in order to compare the active system performance with simplified design method predictions. The TRNSYS simulations were compared to results obtained using the simplified design calculations of the f-Chart method. Comparisons of TRNSYS and f-Chart were used to establish the accuracy of the f-Charts for active systems. A correlation was then developed to correct the monthly loads input into the f-Chart method to account for controller deadbands in both hybrid and active only buildings. A general correction factor was generated to be applied to the f-Chart method to produce more accurate and useful results for hybrid systems.

  9. Electromagnetic Compatibility Studies: LTE BS vs. Aeronautical Radionavigation Services in 694-790 MHz Frequency Band

    Directory of Open Access Journals (Sweden)

    Stankevičius Evaldas

    2014-10-01

    Full Text Available This paper presents the sharing analysis of the 694–790 MHz frequency band for Mobile services IMT and Aeronautical radio-navigation services (ARNS using SEAMCAT (established by CEPT software based on the statistical simulation (Monte-Carlo method. In 2012 the World Radiocommunication Conference (WRC-12 decided to allocate the 694–790 MHz frequency band (the so-called 700 MHz band to mobile services IMT (excluding aeronautical mobile after WRC-15 conference. But this agreement raises electromagnetic compatibility problems, which should be solved until WRC-15 [1]. This study was carried out in two phases: first applying theoretical analysis, then statistical Monte-Carlo simulations with SEAMCAT software tool in order to verify results obtained in theoretical approach. Analytical calculations shows that the required protection distances between ARNS stations and the MS base stations are 132 km. The obtained results from SEAMCAT simulations indicate that separation distance should be above 100 km. These results illustrate that the systems are not electromagnetically compatible. The possible mitigation technic could be antenna pattern correction.

  10. Numerical prediction of heat affected layer in the EDM of aeronautical alloys

    Science.gov (United States)

    Izquierdo, B.; Plaza, S.; Sánchez, J. A.; Pombo, I.; Ortega, N.

    2012-10-01

    Electrical discharge machining is a popular non-traditional machining process, optimum for accurate machining of complex geometries in hard materials. EDM has been used for decades for machining pieces for the aeronautical industry, but surface integrity, and consequently the reliability of the machined parts have been questioned for long time due to the thermal nature of this machining process. In recent years, efforts have been put on modeling of the EDM process, being thermal modeling of the process one promising alternative. In a previous publication an original model of the EDM process was presented and it was used to predict material removal rate and surface finish for the EDM of steel. In the present article the capability of that modeling tool to characterize discharge properties and to predict recast layer distribution when EDMing an aeronautical alloy will be analyzed. EDM process of Inconel 718 has been studied and discharge properties have been obtained for four different EDM regimes. The capability of the model to reflect the behavior of more energetic regimes is discussed. Gathered information has been used to simulate the evolution of the recast layer generation process. Obtained results have been validated comparing them with experimental measurements, revealing a good correlation between predictions and experimental data. Finally, energetic efficiency of the discharge process has been simulated for the adjusted EDM regimes.

  11. Optimal designs of the median run length based double sampling X chart for minimizing the average sample size.

    Directory of Open Access Journals (Sweden)

    Wei Lin Teoh

    Full Text Available Designs of the double sampling (DS X chart are traditionally based on the average run length (ARL criterion. However, the shape of the run length distribution changes with the process mean shifts, ranging from highly skewed when the process is in-control to almost symmetric when the mean shift is large. Therefore, we show that the ARL is a complicated performance measure and that the median run length (MRL is a more meaningful measure to depend on. This is because the MRL provides an intuitive and a fair representation of the central tendency, especially for the rightly skewed run length distribution. Since the DS X chart can effectively reduce the sample size without reducing the statistical efficiency, this paper proposes two optimal designs of the MRL-based DS X chart, for minimizing (i the in-control average sample size (ASS and (ii both the in-control and out-of-control ASSs. Comparisons with the optimal MRL-based EWMA X and Shewhart X charts demonstrate the superiority of the proposed optimal MRL-based DS X chart, as the latter requires a smaller sample size on the average while maintaining the same detection speed as the two former charts. An example involving the added potassium sorbate in a yoghurt manufacturing process is used to illustrate the effectiveness of the proposed MRL-based DS X chart in reducing the sample size needed.

  12. Optimal designs of the median run length based double sampling X chart for minimizing the average sample size.

    Science.gov (United States)

    Teoh, Wei Lin; Khoo, Michael B C; Teh, Sin Yin

    2013-01-01

    Designs of the double sampling (DS) X chart are traditionally based on the average run length (ARL) criterion. However, the shape of the run length distribution changes with the process mean shifts, ranging from highly skewed when the process is in-control to almost symmetric when the mean shift is large. Therefore, we show that the ARL is a complicated performance measure and that the median run length (MRL) is a more meaningful measure to depend on. This is because the MRL provides an intuitive and a fair representation of the central tendency, especially for the rightly skewed run length distribution. Since the DS X chart can effectively reduce the sample size without reducing the statistical efficiency, this paper proposes two optimal designs of the MRL-based DS X chart, for minimizing (i) the in-control average sample size (ASS) and (ii) both the in-control and out-of-control ASSs. Comparisons with the optimal MRL-based EWMA X and Shewhart X charts demonstrate the superiority of the proposed optimal MRL-based DS X chart, as the latter requires a smaller sample size on the average while maintaining the same detection speed as the two former charts. An example involving the added potassium sorbate in a yoghurt manufacturing process is used to illustrate the effectiveness of the proposed MRL-based DS X chart in reducing the sample size needed. PMID:23935873

  13. Data on the distribution of cancer incidence and death across age and sex groups visualized using multilevel spie charts.

    Science.gov (United States)

    Feitelson, Dror G

    2016-04-01

    Cancer incidence and death statistics are typically recorded for multiple age and sex brackets, leading to large data tables which are difficult to digest. Effective visualizations of this data would allow practitioners, policy makers, and the general public to comprehend the data more readily and act on it appropriately. We introduce multilevel spie charts to create a combined visualization of cancer incidence and death statistics. Spie charts combine multiple pie charts, where the base pie chart (representing the general population) is used to set the angles of slices, and the superimposed ones use variable radii to portray the cancer data. Spie charts of cancer incidence and death statistics from Israel for 2009-2011 are used as an illustration. These charts clearly show various patterns of how cancer incidence and death distribute across age and sex groups, illustrating (1) absolute numbers and (2) rates per 100,000 population for different age and sex brackets. In addition, drawing separate charts for different cancer types illustrates relative mortality, both (3) across cancer types and (4) mortality relative to incidence. Naturally, this graphical depiction can be used for other diseases as well.

  14. Excel PivotTables and PivotCharts Your Visual Blueprint for Creating Dynamic Spreadsheets

    CERN Document Server

    McFedries, Paul

    2010-01-01

    Master two of the most powerful features of Excel. Even if you use Excel all the time, you may not be up to speed on two of Excel's most useful features. PivotTable and PivotChart turn long lists of unreadable data into dynamic, easy-to-read tables and charts that highlight the information you need most; you can tweak results with a click or easily fuse data from several sources into one document. Now you can learn how to tap these powerful Excel tools with this practical guide. Using a series of step-by-step tutorials and easy-to-follow screenshots, this book shows you in a visual way how to

  15. ON EVALUATING THE RUN LENGTH PROPERTIES OF X CHARTS WITH ESTIMATED CONTROL LIMITS

    Institute of Scientific and Technical Information of China (English)

    LI Guoying; YANG Chunyan; Siu-Keung TSE

    2002-01-01

    (X)charts with estimated control limits are commonly used in practice andtreated as if the in-control process parameters were known. However, the former canbehave quite differently from the latter. To understand the differences, it is necessary tostudy the run length distribution (RLD), its mean (ARL) and standard deviation (SDRL)of the (X)charts when the control limits are estimated. However, ARL and SDRL areintegrals over an infinite region with a boundless integrand, the finiteness has not beenproved in literature. In this paper, we show the finiteness and uniform integrability ofARL and SDRL. Furthermore, we numerically evaluate the ARL, SDRL and the RLDusing number theory method. A numerical study is conducted to assess the performanceof the proposed method and the results are compared with those given by Quesenberryand Chen.

  16. Interval Data Analysis with the Energy Charting and Metrics Tool (ECAM)

    Energy Technology Data Exchange (ETDEWEB)

    Taasevigen, Danny J.; Katipamula, Srinivas; Koran, William

    2011-07-07

    Analyzing whole building interval data is an inexpensive but effective way to identify and improve building operations, and ultimately save money. Utilizing the Energy Charting and Metrics Tool (ECAM) add-in for Microsoft Excel, building operators and managers can begin implementing changes to their Building Automation System (BAS) after trending the interval data. The two data components needed for full analyses are whole building electricity consumption (kW or kWh) and outdoor air temperature (OAT). Using these two pieces of information, a series of plots and charts and be created in ECAM to monitor the buildings performance over time, gain knowledge of how the building is operating, and make adjustments to the BAS to improve efficiency and start saving money.

  17. THE IMPACT OF THE BUSINESS ENVIRONMENT ON THE SHAPING OF AN ORGANIZATION CHART

    OpenAIRE

    Simona BUTA; Aurel BURCIU

    2014-01-01

    Since Adam Smith , FW Taylor, H. Fayol and recently , whether we are referring to Peter Drucker, Harrington & Harrington, and other authors consecrated in the literature of management / economics, the organization issues in an organization have grown much in complexity. The manner in which the firm / company constitutes the organization chart induces subsequently, explicitly or not, multiple conditionings in the daily practice of the organization (both in the sense that it may favour certain ...

  18. Data for NASA's AVSSE 2 experiment: 25-mb sounding data and synoptic charts

    Science.gov (United States)

    Fucik, N. F.; Turner, R. E.

    1975-01-01

    This report describes the AVSSE II Experiment and presents tabulated rawinsonde data at 25 mb intervals from the surface to 25 mb for the 23 stations participating in the experiment. Soundings were taken between 1200 GMT, May 6 and 1200 GMT, May 7, 1975. Brief discussions are given on the methods of data processing and accuracy. Synoptic charts prepared from the data are presented, as well as an example of contact data.

  19. Drug interactions among commonly used medications. Chart simplifies data from critical literature review.

    OpenAIRE

    Crowther, N. R.; Holbrook, A. M.; Kenwright, R.; Kenwright, M.

    1997-01-01

    OBJECTIVE: To simplify risk assessment, we have developed a way to present critically appraised drug interaction information through a chart. DATA SOURCES: Fifty drugs most frequently prescribed by Canadian family physicians and 16 drugs and substances that frequently interact with these drugs were the basis for a literature review. Drug interaction textbooks and MEDLINE (from 1966 to 1994) were searched for documented interactions. Reports of additive effects and animal or in vitro studies w...

  20. Design charts for arbitrarily pivoted, liquid-lubricated flat-sector-pad thrust bearing

    Science.gov (United States)

    Etsion, I.

    1977-01-01

    A flat, sector-shaped geometry for a liquid-lubricated thrust bearing is analyzed considering both the pitch and roll of the pad. Results are presented in design charts that enable a direct approach to the design of point- and line-pivoted, tilting pad bearings. A comparison is made with the Mitchell bearing approximation and it is found that this approximation always overestimates load capacity.

  1. Hypnosis for treatment of insomnia in school-age children: a retrospective chart review

    OpenAIRE

    Slothower Molly P; Anbar Ran D

    2006-01-01

    Abstract Background The purposes of this study are to document psychosocial stressors and medical conditions associated with development of insomnia in school-age children and to report use of hypnosis for this condition. Methods A retrospective chart review was performed for 84 children and adolescents with insomnia, excluding those with central or obstructive sleep apnea. All patients were offered and accepted instruction in self-hypnosis for treatment of insomnia, and for other symptoms if...

  2. Analysis of the Convergence Process by EXIT Charts for Parallel Implementations of Turbo Decoders

    OpenAIRE

    Sanchez, O.; Jego, Christophe; JEZEQUEL, Michel

    2013-01-01

    International audience Iterative process is a general principle in decoding powerful FEC codes such as turbo codes. However, the mutual information exchange during the iterative process is not easy to analyze and to describe. A useful technique to help the designer is the EXtrinsic Information Transfer (EXIT) chart. Unfortunately, this method cannot be directly applied to the decoding convergence analysis if parallel processing has to be exploited for the design of turbo decoders. In this ...

  3. Better risk assessment with glycated hemoglobin instead of cholesterol in CVD risk prediction charts

    OpenAIRE

    Faeh, David; Rohrmann, Sabine; Braun, Julia

    2013-01-01

    Traditional risk charts for the prediction of cardiovascular disease (CVD) include cholesterol parameters. We evaluated how models predict fatal CVD when cholesterol is replaced by glucose parameters. We used data from NHANES III, a US survey conducted 1988-1994 (follow-up until 2006); 15,454 participants (1,716 CVD deaths) were included. Based on the ESC SCORE method, we used age, sex, blood pressure, smoking and either of the following: (1) total cholesterol, (2) total-to-HDL-cholesterol, (...

  4. Cardiovascular risk assessment in Italy: the CUORE Project risk score and risk chart

    Directory of Open Access Journals (Sweden)

    Simona Giampaoli

    2007-06-01

    Full Text Available

    Aim: Risk charts and risk score, based on the global absolute risk, are key tools for CVD risk assessment. When applied to the population from which they derive, they provide the best estimate of CVD risk. That is why the CUORE Project has among its objectives the assessment of the Italian population’s cardiovascular risk, identifying the model for the prediction of coronary and cerebrovascular events in 10 years.

    Methods: Data fromdifferent cohorts enrolled in the North, Centre and South of Italy between the 1980s and the 1990s were used. From the 7,056 men and 12,574 women aged 35-69 years, free of cardiovascular disease at base-line and followed up for a mean time of 10 years for total and cause-specific mortality and non fatal cerebrovascular and coronary events, 894 major cardiovascular events (596 coronary and 298 cerebrovascular were identified and validated. To assess 10-year cardiovascular risk, the risk score and risk chart were developed for men and women separately, considering the first major coronary or cerebrovascular event as the endpoint.

    Results: The risk score is applied tomen andwomen aged 35-69 years and includes age, systolic blood pressure, total cholesterol, HDL-cholesterol, smoking habit, diabetes and hypertension treatment using continuous values when possible. The risk chart is applied to persons aged 40-69 years and includes the same risk factors as risk score, except for HDL-cholesterol and hypertension treatment, and uses categorical values for all variables.

    Conclusions: The risk score and risk chart are easy-to-use tools which enable general practitioners and specialists to achieve an objective evaluation of the absolute global cardiovascular risk of middle-aged persons in primary prevention.

  5. Risk factors, microbiological findings and outcomes of necrotizing fasciitis in New Zealand: a retrospective chart review

    Directory of Open Access Journals (Sweden)

    Das Dilip Kumar

    2012-12-01

    Full Text Available Abstract Background The incidence and mortality from necrotizing fasciitis (NF are increasing in New Zealand (NZ. Triggered by a media report that traditional Samoan tattooing was causing NF, we conducted a chart review to investigate the role of this and other predisposing and precipitating factors and to document NF microbiology, complications and interventions in NZ. Methods We conducted a retrospective review of 299 hospital charts of patients discharged with NF diagnosis codes in eight hospitals in NZ between 2000 and 2006. We documented and compared by ethnicity the prevalence of predisposing and precipitating conditions, bacteria isolated, complications and interventions used. Results Out of 299 charts, 247 fulfilled the case definition. NF was most common in elderly males. Diabetes was the most frequent co-morbid condition, followed by obesity. Nearly a quarter of patients were taking non-steroidal anti-inflammatory drugs (NSAID. Traditional Samoan tattooing was an uncommon cause. Streptococcus pyogenes and Staphylococcus aureus were the two commonly isolated bacteria. Methicillin-resistant Staphylococcus aureus was implicated in a relatively small number of cases. Shock, renal failure, coagulation abnormality and multi-organ dysfunction were common complications. More than 90% of patients underwent surgical debridement, 56% were admitted to an intensive care unit (ICU and slightly less than half of all patients had blood product transfusion. One in six NF cases had amputations and 23.5% died. Conclusion This chart review found that the highest proportion of NF cases was elderly males with co-morbidities, particularly diabetes and obesity. Tattooing was an uncommon precipitating event. The role of NSAID needs further exploration. NF is a serious disease with severe complications, high case fatality and considerable use of health care resources.

  6. New Technological Charts for Concreting Operations on Site for Civil Constructions

    OpenAIRE

    René Antonio Puig Martínez; Juan José Howland Albear

    2014-01-01

    The on site concreting of constructions, require some regulations to guide the construction companiesto execute the concreting operations according to the status and potential of existing technologies.In Cuba were used for a long time many regulations and construction technical standards issued bythe Ministry of Construction and relating companies, and was published in 1990 the only one versionof Technological Charts for concreting operations on site, about the existing constructions in Cuba,...

  7. National Aeronautics and Space Administration and the Indian Space Research Organisation Synthetic Aperture Radar Mission Concept

    Science.gov (United States)

    Bawden, G. W.; Rosen, P. A.; Dubayah, R.; Hager, B. H.; Joughin, I. R.

    2014-12-01

    The U.S. National Aeronautics and Space Administration and the Indian Space Research Organisation are planning a synthetic aperture radar (currently named NISAR) mission for launch in 2020. The mission is a dual L- and S-band polarimetric SAR satellite with a 12-day interferometric orbit and 240 km wide ground swath. The 3-year mission will have a circular sun synchronous orbit (6 am and 6 pm) with a 98° inclination and 747 km altitude that will provide systematic global coverage. Its primary science objectives are to: measure solid Earth surface deformation (earthquakes, volcanic unrest, land subsidence/uplift, landslides); track and understand cryosphere dynamics (glaciers, ice sheets, sea ice, and permafrost); characterize and track changes in vegetation structure and wetlands for understanding ecosystem dynamics and carbon cycle; and support global disaster response. We will describe the current mission concept: the satellite design/capabilities, spacecraft, launch vehicle, and data flow.

  8. Optical Sensing of the Fatigue Damage State of CFRP under Realistic Aeronautical Load Sequences

    Directory of Open Access Journals (Sweden)

    Pablo Zuluaga-Ramírez

    2015-03-01

    Full Text Available We present an optical sensing methodology to estimate the fatigue damage state of structures made of carbon fiber reinforced polymer (CFRP, by measuring variations on the surface roughness. Variable amplitude loads (VAL, which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.75 between both variables. The data were compared with a previous study for Constant Amplitude Load (CAL obtaining similar results. Conclusions suggest that the surface roughness measured in strategic zones is a useful technique for structural health monitoring of CFRP structures, and that it is independent of the type of load applied. Surface roughness can be measured in the field by optical techniques such as speckle, confocal perfilometers and interferometry, among others.

  9. Relay movement control for maintaining connectivity in aeronautical ad hoc networks

    Institute of Scientific and Technical Information of China (English)

    李杰; 孙志强; 师博浩; 宫二玲; 谢红卫

    2016-01-01

    As a new sort of mobile ad hoc network (MANET), aeronautical ad hoc network (AANET) has fleet-moving airborne nodes (ANs) and suffers from frequent network partitioning due to the rapid-changing topology. In this work, the additional relay nodes (RNs) is employed to repair the network and maintain connectivity in AANET. As ANs move, RNs need to move as well in order to re-establish the topology as quickly as possible. The network model and problem definition are firstly given, and then an online approach for RNs’ movement control is presented to make ANs achieve certain connectivity requirement during run time. By defining the minimum cost feasible moving matrix (MCFM), a fast algorithm is proposed for RNs’ movement control problem. Simulations demonstrate that the proposed algorithm outperforms other control approaches in the highly-dynamic environment and is of great potential to be applied in AANET.

  10. Interference Analysis Status and Plans for Aeronautical Mobile Airport Communications System (AeroMACS)

    Science.gov (United States)

    Kerczewski, Robert J.; Wilson, Jeffrey D.

    2010-01-01

    Interference issues related to the operation of an aeronautical mobile airport communications system (AeroMACS) in the C-Band (specifically 5091-5150 MHz) is being investigated. The issue of primary interest is co-channel interference from AeroMACS into mobile-satellite system (MSS) feeder uplinks. The effort is focusing on establishing practical limits on AeroMACS transmissions from airports so that the threshold of interference into MSS is not exceeded. The analyses are being performed with the software package Visualyse Professional, developed by Transfinite Systems Limited. Results with omni-directional antennas and plans to extend the models to represent AeroMACS more accurately will be presented. These models should enable realistic analyses of emerging AeroMACS designs to be developed from NASA Test Bed, RTCA 223, and European results.

  11. The impact of active controls technology on the structural integrity of aeronautical vehicles

    Science.gov (United States)

    Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

    1993-01-01

    The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

  12. Nondestructive Evaluation Approaches Developed for Material Characterization in Aeronautics and Space Applications

    Science.gov (United States)

    Baaklini, George Y.; Kautz, Harold E.; Gyekenyesi, Andrew L.; Abdul-Aziz, Ali; Martin, Richard E.

    2001-01-01

    At the NASA Glenn Research Center, nondestructive evaluation (NDE) approaches were developed or tailored for characterizing advanced material systems. The emphasis was on high-temperature aerospace propulsion applications. The material systems included monolithic ceramics, superalloys, and high-temperature composites. In the aeronautics area, the major applications were cooled ceramic plate structures for turbine applications, gamma-TiAl blade materials for low-pressure turbines, thermoelastic stress analysis for residual stress measurements in titanium-based and nickel-based engine materials, and acousto-ultrasonics for creep damage assessment in nickel-based alloys. In the space area, applications consisted of cooled carbon-carbon composites for gas generator combustors and flywheel rotors composed of carbon-fiber-reinforced polymer matrix composites for energy storage on the International Space Station.

  13. Researches and studies regarding brazed aluminium alloys microstructure used in aeronautic industry

    Directory of Open Access Journals (Sweden)

    A. Dimitrescu

    2015-04-01

    Full Text Available Brazing is applied to the merge of the pieces which are most required, tensile strength of the solder can reach high values. By brazing there can be assembled pieces of most metals and ferrous and nonferrous alloys, with high melting temperature. This paper presents an analysis of the microstructure of materials from a brazed merge of aluminum alloy L103 which is often used to produce pieces of aeronautical industry. Brazing material was performed using several technologies, and after examination of the microstructure of materials from the merge area it was established as optimal technology the technology which consist of pickling in Aloclene 100 solution with the deposition of filler material on both sides of the base material and the use of spectral acetylene and neutral flame.

  14. Proposed Development of NASA Glenn Research Center's Aeronautical Network Research Simulator

    Science.gov (United States)

    Nguyen, Thanh C.; Kerczewski, Robert J.; Wargo, Chris A.; Kocin, Michael J.; Garcia, Manuel L.

    2004-01-01

    Accurate knowledge and understanding of data link traffic loads that will have an impact on the underlying communications infrastructure within the National Airspace System (NAS) is of paramount importance for planning, development and fielding of future airborne and ground-based communications systems. Attempting to better understand this impact, NASA Glenn Research Center (GRC), through its contractor Computer Networks & Software, Inc. (CNS, Inc.), has developed an emulation and test facility known as the Virtual Aircraft and Controller (VAC) to study data link interactions and the capacity of the NAS to support Controller Pilot Data Link Communications (CPDLC) traffic. The drawback of the current VAC test bed is that it does not allow the test personnel and researchers to present a real world RF environment to a complex airborne or ground system. Fortunately, the United States Air Force and Navy Avionics Test Commands, through its contractor ViaSat, Inc., have developed the Joint Communications Simulator (JCS) to provide communications band test and simulation capability for the RF spectrum through 18 GHz including Communications, Navigation, and Identification and Surveillance functions. In this paper, we are proposing the development of a new and robust test bed that will leverage on the existing NASA GRC's VAC and the Air Force and Navy Commands JCS systems capabilities and functionalities. The proposed NASA Glenn Research Center's Aeronautical Networks Research Simulator (ANRS) will combine current Air Traffic Control applications and physical RF stimulation into an integrated system capable of emulating data transmission behaviors including propagation delay, physical protocol delay, transmission failure and channel interference. The ANRS will provide a simulation/stimulation tool and test bed environment that allow the researcher to predict the performance of various aeronautical network protocol standards and their associated waveforms under varying

  15. Damage analysis of composites integrated with RFID chip used in aeronautics

    Directory of Open Access Journals (Sweden)

    H-A. Alhas

    2013-01-01

    Full Text Available Purpose: A new approach to production process by direct integration of the RFID (Radio-frequency identification chips into the composite parts used during the manufacturing (moulding process of the composite parts has been presented. This research aims a new application of RFID technology and measurement of the resistance of RFID chips integrated into composite parts under X-ray diffraction beams and also impact choc (crash test. This work gives the actual results of an applied research carried out in laboratory (Supmeca-Paris scale and also in industrial scales carried out in the manufacturing department of the French aeronautic company (Eurocopter-Paris.Design/methodology/approach: Application of RFID technology in manufacturing of the composite parts is related to the continuous quality improvement of manufacturing company. Findings: RFID Chips integrated directly in the composite parts during the manufacturing process can improve the efficiency of the manufacturing process and also decrease the lead time and processing time. This application in manufacturing of the composite parts will enable to achieve success for the aeronautic companies.Research limitations/implications: In the future, Industrial companies can transform their manufacturing processes by applying RFID technology that increases manufacturing cycle time, maximize efficiency and eliminate unnecessary steps.Practical implications: Using RFID technology in production will help industrial companies and also customers reduce their time and operating costs significantly and increase employee productivity. This application can also decrease lead time and make faster progress toward their sustainability goals.Originality/value: A detail comparison was made between two approaches; conventional production system and new approach by integrating RFID in composite part. At the end of analysis, time saving in the production was calculated as 135 minutes (more than 2 hours by following real

  16. Concurrent Development and Certification of SOFTCOMAG 49AA Alloy for Aeronautical Applications

    Directory of Open Access Journals (Sweden)

    Ashok Kumar

    2012-01-01

    Full Text Available Softcomag 49AA alloy consisting of 49 wt per cent Fe, 49 wt. per cent Co and 2 wt per cent V is a soft magnetic alloy with a combination of very high saturation magnetisation and high magnetostriction and used for several aeronautical applications such as generators (stators and rotors, fixed iron moving armature units etc. Though this alloy is brittle in nature, it can be formed into hot rolled bars and cold rolled sheets by adopting suitable thermo mechanical treatments. In order to indigenise and subsequent type certification for aeronautical applications, the alloy was produced using 100 per cent virgin raw materials in a vacuum induction melting (VIM furnace which not only ensures substantial reduction of inclusions, but also the production of homogeneous alloy as a result of induction stirring. The chemical composition was examined and hot working parameters of the alloy were so optimised that they would result in the best combination of magnetic, physical and mechanical properties for the end use, which forms the central theme behind the developmental activity that was simultaneously covered by a comprehensive certification process. The material thus produced is subjected to stringent quality control checks in accordance with stipulated airworthiness norms. The paper discusses in detail the indigenisation efforts and airworthiness certification of the alloy Softcomag 49AA and its comparison with equivalent grades, namely PERMENDUR 49 and VACOFLUX 50.Defence Science Journal, 2012, 62(1, pp.67-72, DOI:http://dx.doi.org/10.14429/dsj.62.1093 

  17. Vitamin Chart

    Science.gov (United States)

    ... lentils), nuts, dairy products, green leafy vegetables, broccoli, asparagus, and fortified cereals. Teen guys need 1.3 ... dried beans and other legumes, green leafy vegetables, asparagus, and orange juice are good sources of this ...

  18. Short course continuous, hyperfractionated, accelerated radiation therapy (CHART) as preoperative treatment for rectal cancer

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, S.; Glynne-Jones, R.; Harrison, M.; Makris, A. [Mount Vernon Cancer Center, Northwood, Middlesex (United Kingdom); Novell, R.; Brown, K. [Luton and Dunstable Hospital (United Kingdom)

    2006-12-15

    Determine feasibility and toxicity of preoperative short course pelvic CHART (25 Gy in 15 fractions over 5 days) for treatment of clinically resectable primary rectal tumours. Between 1998 and 2004, 20 patients with clinically staged T3 resectable rectal carcinoma were treated in this prospective pilot study with preoperative short course CHART to their pelvis. The aim was for total mesorectal excision within 7 days. Radiation toxicity, surgical morbidity, locoregional control (LRC), overall (OS), cause specific (CSS) and disease free survival (DFS) outcomes were documented. Nineteen of the 20 patients completed planned radiotherapy. One discontinued radiotherapy due to toxicity. All patients underwent potentially curative radical surgery. One patient developed grade 3, and three patients grade 2 gastrointestinal toxicity. With a median follow-up of 31 months (range 0.9-88), there is no grade 3, 4 or 5 late toxicity. Two patients experienced grade 2, and three patients grade 1 late bowel toxicity. Two patients died from postoperative complications, and two developed grade 2 abdominal wound infections. At 3 years LRC is 95% (95% CI 83-100), OS 72% (95% CI 51-94), CSS 86% (95% CI 68-100) and DFS 80% (95% CI 60-100). Two patients died from metastatic disease, one patient from a second primary and one patient is alive after successful resection of hepatic metastases. This small study suggests preoperative short course CHART for clinically resectable rectal carcinoma is feasible with acceptable compliance and tolerable side effects.

  19. Development of dental charts according to tooth development and eruption for Turkish children and young adults

    International Nuclear Information System (INIS)

    In this study, we aimed to develop dental charts for Turkish children and young adults of both genders within the age group of 4.5-22.5 years according to tooth mineralization and eruption in a format similar to that proposed by AlQahtani et al. In total, 753 digital panoramic radiographs from 350 males and 403 females were assessed. The permanent teeth were evaluated according to the classification system described by Demirjian et al. The eruption stage was assessed with Bengston's system, which was modified by AlQahtani et al at four points. Teeth generally developed earlier in females than in males. This was particularly notable in the age group of 5-14 years. However, this difference was usually visible in only one stage, not in all teeth. It has been determined that the mixed dentition period ended with the shedding of the second deciduous molars in both genders. The dental charts presented here included information that could be beneficial to dental clinicians in making appropriate diagnosis and planning orthodontic and surgical procedures. These charts also provided datasets for preliminary dental age estimation in Turkish children and young adults.

  20. Fault detection and diagnosis using statistical control charts and artificial neural networks

    International Nuclear Information System (INIS)

    In order to operate a successful plant or process, continuous improvement must be made in the areas of safety, quality and reliability. Central to this continuous improvement is the early or proactive detection and correct diagnosis of process faults. This research examines the feasibility of using Cumulative Summation (CUSUM) Control Charts and artificial neural networks together for fault detection and diagnosis (FDD). The proposed FDD strategy was tested on a model of the heat transport system of a CANDU nuclear reactor. The results of the investigation indicate that a FDD system using CUSUM Control Charts and a Radial Basis Function (RBF) neural network is not only feasible but also of promising potential. The control charts and neural network are linked together by using a characteristic fault signature pattern for each fault which is to be detected and diagnosed. When tested, the system was able to eliminate all false alarms at steady state, promptly detect 6 fault conditions and correctly diagnose 5 out of the 6 faults. The diagnosis for the sixth fault was inconclusive. (author). 9 refs., 6 tabs., 7 figs