WorldWideScience

Sample records for advanced integral type

  1. Development of Regulatory Technical Requirements for the Advanced Integral Type Research Reactor

    International Nuclear Information System (INIS)

    Jo, Jong Chull; Yune, Young Gill; Kim, Woong Sik; Kim, Hho Jung

    2004-01-01

    This paper presents the current status of the study on the development of regulatory technical requirements for the licensing review of an advanced integral type research reactor of which the license application is expected in a few years. According to the Atomic Energy Act of Korea, both research and education reactors are subject to the technical requirements for power reactors in the licensing review. But, some of the requirements may not be applicable or insufficient for the licensing reviews of reactors with unique design features. Thus it is necessary to identify which review topics or areas can not be addressed by the existing requirements and to develop the required ones newly or supplement appropriately. Through the study performed so far, it has been identified that the following requirements need to be developed newly for the licensing review of SMART-P: the use of proven technology, the interfacial facility, the non-safety systems, and the metallic fuels. The approach and basis for the development of each of the requirements are discussed. (authors)

  2. Evaluation of Advanced Thermohydraulic System Codes for Design and Safety Analysis of Integral Type Reactors

    International Nuclear Information System (INIS)

    2014-02-01

    The integral pressurized water reactor (PWR) concept, which incorporates the nuclear steam supply systems within the reactor vessel, is one of the innovative reactor types with high potential for near term deployment. An International Collaborative Standard Problem (ICSP) on Integral PWR Design, Natural Circulation Flow Stability and Thermohydraulic Coupling of Primary System and Containment during Accidents was established in 2010. Oregon State University, which made available the use of its experimental facility built to demonstrate the feasibility of the Multi-application Small Light Water Reactor (MASLWR) design, and sixteen institutes from seven Member States participated in this ICSP. The objective of the ICSP is to assess computer codes for reactor system design and safety analysis. This objective is achieved through the production of experimental data and computer code simulation of experiments. A loss of feedwater transient with subsequent automatic depressurization system blowdown and long term cooling was selected as the reference event since many different modes of natural circulation phenomena, including the coupling of primary system, high pressure containment and cooling pool are expected to occur during this transient. The power maneuvering transient is also tested to examine the stability of natural circulation during the single and two phase conditions. The ICSP was conducted in three phases: pre-test (with designed initial and boundary conditions established before the experiment was conducted), blind (with real initial and boundary conditions after the experiment was conducted) and open simulation (after the observation of real experimental data). Most advanced thermohydraulic system analysis codes such as TRACE, RELAPS and MARS have been assessed against experiments conducted at the MASLWR test facility. The ICSP has provided all participants with the opportunity to evaluate the strengths and weaknesses of their system codes in the transient

  3. Advances in integrated optics

    CERN Document Server

    Chester, A; Bertolotti, M

    1994-01-01

    This volwne contains the Proceedings of a two-week summer conference titled "Advances in Integrated Optics" held June 1-9, 1993, in Erice, Sicily. This was the 18th annual course organized by the International School of Quantum Electronics, under the auspices of the "Ettore Majorana" Centre for Scientific Culture. The term Integrated Optics signifies guided-wave optical circuits consisting of two or more devices on a single substrate. Since its inception in the late 1960's, Integrated Optics has evolved from a specialized research topic into a broad field of work, ranging from basic research through commercial applications. Today many devices are available on market while a big effort is devolved to research on integrated nonlinear optical devices. This conference was organized to provide a comprehensive survey of the frontiers of this technology, including fundamental concepts, nonlinear optical materials, devices both in the linear and nonlinear regimes, and selected applications. These Proceedings update a...

  4. On some advanced type inequalities for Sugeno integral and T-(S-)evaluators

    Czech Academy of Sciences Publication Activity Database

    Agahi, H.; Mesiar, Radko; Ouyang, Y.

    2012-01-01

    Roč. 190, č. 1 (2012), s. 64-75 ISSN 0020-0255 R&D Projects: GA ČR GAP402/11/0378 Institutional research plan: CEZ:AV0Z10750506 Institutional support: RVO:67985556 Keywords : Nonadditive measure * Sugeno integral * Comonotone functions Subject RIV: AH - Economics Impact factor: 3.643, year: 2012 http://library.utia.cas.cz/separaty/2012/E/mesiar- 0436856.pdf

  5. Advanced Integrated Traction System

    Energy Technology Data Exchange (ETDEWEB)

    Greg Smith; Charles Gough

    2011-08-31

    The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step

  6. Experimental and analytical studies on the passive residual heat removal system for the advanced integral type reactor

    International Nuclear Information System (INIS)

    Park, Hyun-Sik; Choi, Ki-Yong; Cho, Seok; Park, Choon-Kyung; Lee, Sung-Jae; Song, Chul-Hwa; Chung, Moon-Ki

    2004-01-01

    An experiment on the thermal-hydraulic characteristics of the passive residual heat removal system (PRHRS) for an advanced integral type reactor, SMART-P, has been performed, and its experimental results have been analyzed using a best-estimated system analysis code, MARS. The experiment is performed to investigate the performance of the passive residual heat removal system using the high temperature and high pressure thermal-hydraulic test facility (VISTA) which simulates the SMART-P. The natural circulation performance of the PRHRS, the heat transfer characteristics of the PRHRS heat exchangers and the emergency cooldown tank (ECT), and the thermal-hydraulic behavior of the primary loop are investigated. The experimental results show that the coolant flows steadily in the PRHRS loop and the heat transfer through the PRHRS heat exchanger in the emergency cooldown tank is sufficient enough to enable a natural circulation of the coolant. Analysis on a typical PRHRS test has been carried out using the MARS code. The overall trends of the calculated flow rate, pressure, temperature, and heat transfer rate in the PRHRS are similar to the experimental data. There is good agreement between the experimental data and the calculated one for the fluid temperature in the PRHRS steam line. However, the calculated fluid temperature in the PRHRS condensate line is higher, the calculated coolant outlet temperature is lower, and the heat transfer rate through the PRHRS heat exchanger is lower than the experimental data. It seems that it is due to an insufficient heat transfer modeling in the pool such as the emergency cooldown tank in the MARS calculation. (author)

  7. Advanced integrated safeguards at Barnwell

    Energy Technology Data Exchange (ETDEWEB)

    Bambas, K.J.; Barnes, L.D.

    1980-06-01

    The development and initial performance testing of an advanced integrated safeguards system at the Barnwell Nuclear Fuel Plant (BNFP) is described. The program concentrates on the integration and coordination of physical security and nuclear materials control and accounting at a single location. Hardware and software for this phase have been installed and are currently being evaluated. The AGNS/DOE program is now in its third year of development at the BNFP.

  8. Development of PIRT for Advanced Integral Reactor

    International Nuclear Information System (INIS)

    Chung, B.D.; Kim, H.C.; Bae, K.H.

    2004-01-01

    A new advanced integral type pressurized water reactor is under development at KAERI. The new advanced integral reactor incorporates a number of innovative design features and the response of the reactor to various transients and accidents are significantly different from those of the current commercial PWRs. The PIRT (Phenomena Identification and Ranking Table) process was originally formulated to support the best estimate plus uncertainty licensing option in the CSAU methodology. The subsequent works have shown that the PIRT process can be used to improve the safety analysis code for a new application and to establish experimental programs and to support the resolution of the licensing issues. In the development of advanced integral reactor, PIRT is expected to be used to guide experimental and analytical research in support of safety evaluation method and the thermal-hydraulic code developments as well as in the design certification efforts. This paper presents the results of the development of PIRT for the advanced integral reactor of 65 MWt power. The new Advanced Integral Reactor incorporates numerous components with features that are very different to those of the current commercial reactors. The reactor pressure vessel (RPV) is an integral type and all major primary circuit components are contained within the reactor pressure vessel. Major components housed within the RPV are the pressurizer, the steam generators (SG), and the main circulation pumps (MCP). As these components are housed within the RPV, there is no need for large diameter pipes to connect the components. This completely eliminates the possibility of large break loss of coolant accident (LBLOCA) of the kind that is considered in Design Basis Accidents (DBA) of commercial PWRs. The fuel assemblies are put in a hexagonal lattice which forms the core. The hot coolant from the core flows upwards through upper plenum and pump suction duct into the MCPs. The coolant then flows downwards into the

  9. Advances by the Integral Fast Reactor Program

    International Nuclear Information System (INIS)

    Lineberry, M.J.; Pedersen, D.R.; Walters, L.C.; Cahalan, J.E.

    1991-01-01

    The advances by the Integral Fast Reactor Program at Argonne National Laboratory are the subject of this paper. The Integral Fast Reactor (IFR) is an advanced liquid-metal-cooled reactor concept being developed at Argonne National Laboratory. The advances stressed in the paper include fuel irradiation performance, improved passive safety, and the development of a prototype fuel cycle facility. 14 refs

  10. Advanced Microgravity Compatible, Integrated Laundry System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Microgravity Compatible, Integrated Laundry (AMCIL) is a microgravity compatible liquid / liquid vapor, two-phase laundry system with water jet...

  11. Advances on integrated microwave photonics

    DEFF Research Database (Denmark)

    Dong, Jianji; Liao, Shasha; Yan, Siqi

    2017-01-01

    Integrated microwave photonics has attracted a lot of attentions and makes significant improvement in last 10 years. We have proposed and demonstrated several schemes about microwave photonics including waveform generation, signal processing and energy-efficient micro-heaters. Our schemes are all...

  12. Human Factors and Data Logging Processes With the Use of Advanced Technology for Adults With Type 1 Diabetes: Systematic Integrative Review.

    Science.gov (United States)

    Waite, Marion; Martin, Clare; Franklin, Rachel; Duce, David; Harrison, Rachel

    2018-03-15

    People with type 1 diabetes (T1D) undertake self-management to prevent short and long-term complications. Advanced technology potentially supports such activities but requires consideration of psychological and behavioral constructs and usability issues. Economic factors and health care provider capacity influence access and uptake of advanced technology. Previous reviews have focused upon clinical outcomes or were descriptive or have synthesized studies on adults with those on children and young people where human factors are different. This review described and examined the relationship between human factors and adherence with technology for data logging processes in adults with T1D. A systematic literature search was undertaken by using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Quality appraisal was undertaken and data were abstracted and categorized into the themes that underpinned the human factor constructs that were examined. A total of 18 studies were included. A total of 6 constructs emerged from the data analysis: the relationship between adherence to data logging and measurable outcomes; satisfaction with the transition to advanced technology for self-management; use of advanced technology and time spent on diabetes-related activities; strategies to mediate the complexities of diabetes and the use of advanced technology; cognition in the wild; and meanings, views, and perspectives from the users of technology. Increased treatment satisfaction was found on transition from traditional to advanced technology use-insulin pump and continuous glucose monitoring (CGM); the most significant factor was when blood glucose levels were consistently spent considerable time on their diabetes self-care. Logging of data was positively correlated with increasing age when using an app that provided meaningful feedback (regression coefficient=55.8 recordings/year; P ≤.01). There were benefits of CGM for older people in

  13. Advanced materials for integrated optical waveguides

    CERN Document Server

    Tong Ph D, Xingcun Colin

    2014-01-01

    This book provides a comprehensive introduction to integrated optical waveguides for information technology and data communications. Integrated coverage ranges from advanced materials, fabrication, and characterization techniques to guidelines for design and simulation. A concluding chapter offers perspectives on likely future trends and challenges. The dramatic scaling down of feature sizes has driven exponential improvements in semiconductor productivity and performance in the past several decades. However, with the potential of gigascale integration, size reduction is approaching a physical limitation due to the negative impact on resistance and inductance of metal interconnects with current copper-trace based technology. Integrated optics provides a potentially lower-cost, higher performance alternative to electronics in optical communication systems. Optical interconnects, in which light can be generated, guided, modulated, amplified, and detected, can provide greater bandwidth, lower power consumption, ...

  14. INTEGRATED PLASMA CONTROL FOR ADVANCED TOKAMAKS

    Energy Technology Data Exchange (ETDEWEB)

    HUMPHREYS,D.A; FERRON,J.R; JOHNSON,R.D; LEUER,J.A; PENAFLOR,B.G; WALKER,M.L; WELANDER,A.S; KHAYRUTDINOV,R.R; DOKOUKA,V; EDGELL,D.H; FRANSSON,C.M

    2003-10-01

    OAK-B135 Advanced tokamaks (AT) are distinguished from conventional tokamaks by their high degree of shaping, achievement of profiles optimized for high confinement and stability characteristics, and active stabilization of MHD instabilities to attain high values of normalized beta and confinement. These high performance fusion devices thus require accurate regulation of the plasma boundary, internal profiles, pumping, fueling, and heating, as well as simultaneous and well-coordinated MHD control action to stabilize such instabilities as tearing modes and resistive wall modes. Satisfying the simultaneous demands on control accuracy, reliability, and performance for all of these subsystems requires a high degree of integration in both design and operation of the plasma control system in an advanced tokamak. The present work describes the approach, benefits, and progress made in integrated plasma control with application examples drawn from the DIII-D tokamak. The approach includes construction of plasma and system response models, validation of models against operating experiments, design of integrated controllers which operate in concert with one another as well as with supervisory modules, simulation of control action against off-line and actual machine control platforms, and iteration of the design-test loop to optimize performance.

  15. Advancing Alternative Analysis: Integration of Decision Science.

    Science.gov (United States)

    Malloy, Timothy F; Zaunbrecher, Virginia M; Batteate, Christina M; Blake, Ann; Carroll, William F; Corbett, Charles J; Hansen, Steffen Foss; Lempert, Robert J; Linkov, Igor; McFadden, Roger; Moran, Kelly D; Olivetti, Elsa; Ostrom, Nancy K; Romero, Michelle; Schoenung, Julie M; Seager, Thomas P; Sinsheimer, Peter; Thayer, Kristina A

    2017-06-13

    Decision analysis-a systematic approach to solving complex problems-offers tools and frameworks to support decision making that are increasingly being applied to environmental challenges. Alternatives analysis is a method used in regulation and product design to identify, compare, and evaluate the safety and viability of potential substitutes for hazardous chemicals. We assessed whether decision science may assist the alternatives analysis decision maker in comparing alternatives across a range of metrics. A workshop was convened that included representatives from government, academia, business, and civil society and included experts in toxicology, decision science, alternatives assessment, engineering, and law and policy. Participants were divided into two groups and were prompted with targeted questions. Throughout the workshop, the groups periodically came together in plenary sessions to reflect on other groups' findings. We concluded that the further incorporation of decision science into alternatives analysis would advance the ability of companies and regulators to select alternatives to harmful ingredients and would also advance the science of decision analysis. We advance four recommendations: a ) engaging the systematic development and evaluation of decision approaches and tools; b ) using case studies to advance the integration of decision analysis into alternatives analysis; c ) supporting transdisciplinary research; and d ) supporting education and outreach efforts. https://doi.org/10.1289/EHP483.

  16. Advancing Globally Integrated Logistics Effort 2017 Wargame Report

    Science.gov (United States)

    2017-09-01

    September 2017 Dr. M. Webster Ewell, Jr. Director, Integration and Gaming Team Advanced Technology and Systems Analysis REPORT ...To) 4. TITLE AND SUBTITLE (U) Advancing Globally Integrated Logistics Effort 2017 5a. CONTRACT NUMBER N00014-16-D-5003 Wargame Report 5b. GRANT...DISTRIBUTION STATEMENT A. Approved for public release: distribution unlimited. Advancing Globally Integrated Logistics Effort

  17. Advanced integrated battery testing and simulation

    Science.gov (United States)

    Liaw, Bor Yann; Bethune, Keith P.; Yang, Xiao Guang

    The recent rapid expansion in the use of portable electronics, computers, personal data assistants, cellular phones, power tools, and even electric and hybrid vehicles creates a strong demand on fast deployment of battery technologies at an unprecedented rate. To facilitate such a development integrated battery testing and simulation (IBTS) using computer modeling is an effective tool to improve our capability of rapid prototyping battery technology and facilitating concurrent product development. In this paper, we will present a state-of-the-art approach to use IBTS for improvements in battery cell design, operation optimization, and even charge control for advanced batteries.

  18. Advances in Integrated Vehicle Health Monitoring Systems

    Directory of Open Access Journals (Sweden)

    Debopam Acharya

    2011-07-01

    Full Text Available One of the fastest growing fields of study in defense market currently is Integrated Vehicle Health Monitoring (IVHM. These systems perform collection and analysis of data concerning operating parameters and damage information of vehicles in real-time and periodically send them to the base station for appropriate action. Recent advances in materials and sensor networks and technologies promise development of such systems for land, water, and aerial vehicles. These IVHM systems are of immense use in defense services which require their vehicles and systems to operate normally even under hostile and harsh environments. This work will discuss various issues related to IVHMs and prominent sensor technologies available to build such systems. It will also include the structure of a general purpose IVHM of a vehicle which can be used to monitor its inner operating parameters and damage information of its components.

  19. Technology advancement for integrative stem cell analyses.

    Science.gov (United States)

    Jeong, Yoon; Choi, Jonghoon; Lee, Kwan Hyi

    2014-12-01

    Scientists have endeavored to use stem cells for a variety of applications ranging from basic science research to translational medicine. Population-based characterization of such stem cells, while providing an important foundation to further development, often disregard the heterogeneity inherent among individual constituents within a given population. The population-based analysis and characterization of stem cells and the problems associated with such a blanket approach only underscore the need for the development of new analytical technology. In this article, we review current stem cell analytical technologies, along with the advantages and disadvantages of each, followed by applications of these technologies in the field of stem cells. Furthermore, while recent advances in micro/nano technology have led to a growth in the stem cell analytical field, underlying architectural concepts allow only for a vertical analytical approach, in which different desirable parameters are obtained from multiple individual experiments and there are many technical challenges that limit vertically integrated analytical tools. Therefore, we propose--by introducing a concept of vertical and horizontal approach--that there is the need of adequate methods to the integration of information, such that multiple descriptive parameters from a stem cell can be obtained from a single experiment.

  20. Nuclear integrated database and design advancement system

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jae Joo; Jeong, Kwang Sub; Kim, Seung Hwan; Choi, Sun Young

    1997-01-01

    The objective of NuIDEAS is to computerize design processes through an integrated database by eliminating the current work style of delivering hardcopy documents and drawings. The major research contents of NuIDEAS are the advancement of design processes by computerization, the establishment of design database and 3 dimensional visualization of design data. KSNP (Korea Standard Nuclear Power Plant) is the target of legacy database and 3 dimensional model, so that can be utilized in the next plant design. In the first year, the blueprint of NuIDEAS is proposed, and its prototype is developed by applying the rapidly revolutionizing computer technology. The major results of the first year research were to establish the architecture of the integrated database ensuring data consistency, and to build design database of reactor coolant system and heavy components. Also various softwares were developed to search, share and utilize the data through networks, and the detailed 3 dimensional CAD models of nuclear fuel and heavy components were constructed, and walk-through simulation using the models are developed. This report contains the major additions and modifications to the object oriented database and associated program, using methods and Javascript.. (author). 36 refs., 1 tab., 32 figs.

  1. Nuclear integrated database and design advancement system

    International Nuclear Information System (INIS)

    Ha, Jae Joo; Jeong, Kwang Sub; Kim, Seung Hwan; Choi, Sun Young.

    1997-01-01

    The objective of NuIDEAS is to computerize design processes through an integrated database by eliminating the current work style of delivering hardcopy documents and drawings. The major research contents of NuIDEAS are the advancement of design processes by computerization, the establishment of design database and 3 dimensional visualization of design data. KSNP (Korea Standard Nuclear Power Plant) is the target of legacy database and 3 dimensional model, so that can be utilized in the next plant design. In the first year, the blueprint of NuIDEAS is proposed, and its prototype is developed by applying the rapidly revolutionizing computer technology. The major results of the first year research were to establish the architecture of the integrated database ensuring data consistency, and to build design database of reactor coolant system and heavy components. Also various softwares were developed to search, share and utilize the data through networks, and the detailed 3 dimensional CAD models of nuclear fuel and heavy components were constructed, and walk-through simulation using the models are developed. This report contains the major additions and modifications to the object oriented database and associated program, using methods and Javascript.. (author). 36 refs., 1 tab., 32 figs

  2. Advanced nuclear reactor types and technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ignatiev, V. [ed.; Feinberg, O.; Morozov, A. [Russian Research Centre `Kurchatov Institute`, Moscow (Russian Federation); Devell, L. [Studsvik Eco and Safety AB, Nykoeping (Sweden)

    1995-07-01

    The document is a comprehensive world-wide catalogue of concepts and designs of advanced fission reactor types and fuel cycle technologies. Two parts have been prepared: Part 1 Reactors for Power Production and Part 2 Heating and Other Reactor Applications. Part 3, which will cover advanced waste management technology, reprocessing and disposal for different nuclear fission options is planned for compilation during 1995. The catalogue was prepared according to a special format which briefly presents the project title, technical approach, development status, application of the technology, reactor type, power output, and organization which developed these designs. Part 1 and 2 cover water cooled reactors, liquid metal fast reactors, gas-cooled reactors and molten salt reactors. Subcritical accelerator-driven systems are also considered. Various reactor applications as power production, heat generation, ship propulsion, space power sources and transmutation of such waste are included. Each project is described within a few pages with the main features of an actual design using a table with main technical data and figure as well as references for additional information. Each chapter starts with an introduction which briefly describes main trends and approaches in this field. Explanations of terms and abbreviations are provided in a glossary.

  3. Advanced nuclear reactor types and technologies

    International Nuclear Information System (INIS)

    Ignatiev, V.; Devell, L.

    1995-01-01

    The document is a comprehensive world-wide catalogue of concepts and designs of advanced fission reactor types and fuel cycle technologies. Two parts have been prepared: Part 1 Reactors for Power Production and Part 2 Heating and Other Reactor Applications. Part 3, which will cover advanced waste management technology, reprocessing and disposal for different nuclear fission options is planned for compilation during 1995. The catalogue was prepared according to a special format which briefly presents the project title, technical approach, development status, application of the technology, reactor type, power output, and organization which developed these designs. Part 1 and 2 cover water cooled reactors, liquid metal fast reactors, gas-cooled reactors and molten salt reactors. Subcritical accelerator-driven systems are also considered. Various reactor applications as power production, heat generation, ship propulsion, space power sources and transmutation of such waste are included. Each project is described within a few pages with the main features of an actual design using a table with main technical data and figure as well as references for additional information. Each chapter starts with an introduction which briefly describes main trends and approaches in this field. Explanations of terms and abbreviations are provided in a glossary

  4. Integrated project management type contracts

    International Nuclear Information System (INIS)

    Heisler, S.I.

    1975-01-01

    The concept of integrated project management represents a single source to which the owner can turn for all project management functions excepting for those relating to outside parties such as site purchase, personnel selection etc. Other functions such as design, procurement, construction management, schedule and cost control, quality assurance/quality control are usually handled by the integrated project manager as the agent of the owner. The arrangement is flexible and the responsibilities can be varied to suit the size and experience of the owner. Past experience in the United States indicates an increase in the trend toward IPM work and it appears that overseas this trend is developing also. (orig./RW) [de

  5. Integrity evaluation for steam generator tube of system integrated modular advanced reactor

    International Nuclear Information System (INIS)

    Kim, J. S.; Jin, T. E.; Jeong, M. J.; Choi, Y. H.; Jeo, J. C.

    2003-01-01

    In this study, the structural integrity for SG tube of system integrated modular advanced reactor, which is subjected to dominant external pressure as well as helical type, is evaluated using the commercial finite element package ABAQUS and the American petrochemical industry code API 579 Appendix B. First of all, the crack behavior under the assumption of local heating is assessed using ABAQUS. And, the buckling behavior of tube with 40% wall thinning is assessed using API 579 Appendix B. As a result, it is found that the crack closure phenomenon occurs under external pressure and the buckling doesn't occur even if 40% wall thinning exists in tube

  6. Software extension and integration with type classes

    DEFF Research Database (Denmark)

    Lämmel, Ralf; Ostermann, Klaus

    2006-01-01

    expressiveness, by using the language concept of \\emph{type classes}, as it is available in the functional programming language Haskell. A detailed comparison with related work shows that type classes provide a powerful framework in which solutions to known software extension and integration problems can...... be provided. We also pinpoint several limitations of type classes in this context....

  7. General Chebyshev type inequalities for universal integral

    Czech Academy of Sciences Publication Activity Database

    Agahi, H.; Mesiar, Radko; Ouyang, Y.; Pap, E.; Štrboja, M.

    2012-01-01

    Roč. 187, č. 1 (2012), s. 171-178 ISSN 0020-0255 R&D Projects: GA ČR GAP402/11/0378 Institutional research plan: CEZ:AV0Z10750506 Keywords : Universal integral * Chebyshev’s inequality * Minkowski’s inequality * Seminormed fuzzy integral Subject RIV: BA - General Mathematics Impact factor: 3.643, year: 2012 http://library.utia.cas.cz/separaty/2012/E/mesiar-general chebyshev type inequalities for universal integral .pdf

  8. Liapunov-type inequality for universal integral

    Czech Academy of Sciences Publication Activity Database

    Agahi, H.; Mohammadpour, A.; Mesiar, Radko; Vaezpour, M. S.

    2012-01-01

    Roč. 27, č. 10 (2012), s. 908-925 ISSN 0884-8173 R&D Projects: GA ČR GAP402/11/0378 Institutional support: RVO:67985556 Keywords : integral inequality * universal integral * Liapunov inequality Subject RIV: BA - General Mathematics Impact factor: 1.416, year: 2012 http://library.utia.cas.cz/separaty/2012/E/mesiar-liapunov-type inequality for universal integral.pdf

  9. Integrability conditions on Engel-type manifolds

    Science.gov (United States)

    Calin, Ovidiu; Chang, Der-Chen; Hu, Jishan

    2015-09-01

    We introduce the concept of Engel manifold, as a manifold that resembles locally the Engel group, and find the integrability conditions of the associated sub-elliptic system , . These are given by , . Then an explicit construction of the solution involving an integral representation is provided, which corresponds to a Poincaré-type lemma for the Engel's distribution.

  10. Advanced multiresponse process optimisation an intelligent and integrated approach

    CERN Document Server

    Šibalija, Tatjana V

    2016-01-01

    This book presents an intelligent, integrated, problem-independent method for multiresponse process optimization. In contrast to traditional approaches, the idea of this method is to provide a unique model for the optimization of various processes, without imposition of assumptions relating to the type of process, the type and number of process parameters and responses, or interdependences among them. The presented method for experimental design of processes with multiple correlated responses is composed of three modules: an expert system that selects the experimental plan based on the orthogonal arrays; the factor effects approach, which performs processing of experimental data based on Taguchi’s quality loss function and multivariate statistical methods; and process modeling and optimization based on artificial neural networks and metaheuristic optimization algorithms. The implementation is demonstrated using four case studies relating to high-tech industries and advanced, non-conventional processes.

  11. A Typeful Integration of SQL into Curry

    OpenAIRE

    Hanus, Michael; Krone, Julia

    2017-01-01

    We present an extension of the declarative programming language Curry to support the access to data stored in relational databases via SQL. Since Curry is statically typed, our emphasis on this SQL integration is on type safety. Our extension respects the type system of Curry so that run-time errors due to ill-typed data are avoided. This is obtained by preprocessing SQL statements at compile time and translating them into type-safe database access operations. As a consequence, the type ch...

  12. Advanced Manufacturing Technologies (AMT): Composites Integrated Modeling

    Data.gov (United States)

    National Aeronautics and Space Administration — The Composites Integrated Modeling (CIM) Element developed low cost, lightweight, and efficient composite structures, materials and manufacturing technologies with...

  13. The advanced microgrid. Integration and interoperability

    Energy Technology Data Exchange (ETDEWEB)

    Bower, Ward Isaac [Ward Bower Innovations, LLC, Albuquerque, NM (United Staes); Ton, Dan T. [U.S. Dept. of Energy, Washington, DC (United States); Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Glover, Steven F [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bhatnagar, Dhruv [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reilly, Jim [Reily Associates, Pittston, PA (United States)

    2014-02-01

    This white paper focuses on "advanced microgrids," but sections do, out of necessity, reference today's commercially available systems and installations in order to clearly distinguish the differences and advances. Advanced microgrids have been identified as being a necessary part of the modern electrical grid through a two DOE microgrid workshops, the National Institute of Standards and Technology, Smart Grid Interoperability Panel and other related sources. With their grid-interconnectivity advantages, advanced microgrids will improve system energy efficiency and reliability and provide enabling technologies for grid-independence to end-user sites. One popular definition that has been evolved and is used in multiple references is that a microgrid is a group of interconnected loads and distributed-energy resources within clearly defined electrical boundaries that acts as a single controllable entity with respect to the grid. A microgrid can connect and disconnect from the grid to enable it to operate in both grid-connected or island-mode. Further, an advanced microgrid can then be loosely defined as a dynamic microgrid.

  14. Berwald type inequality for Sugeno integral

    Czech Academy of Sciences Publication Activity Database

    Hamzeh, A.; Mesiar, Radko; Yao, O.; Endre, P.; Mirjama, Š.

    2010-01-01

    Roč. 217, č. 8 (2010), s. 4100-4108 ISSN 0096-3003 R&D Projects: GA ČR GA402/08/0618 Institutional research plan: CEZ:AV0Z10750506 Keywords : Berwald's inequality * Nonadditive measure * Sugeno integral Subject RIV: BA - General Mathematics Impact factor: 1.534, year: 2010 http://library.utia.cas.cz/separaty/2011/E/mesiar-berwald type inequality for sugeno integral.pdf

  15. Advanced Microgravity Compatible, Integrated Laundry System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — An Advanced Microgravity Compatible, Integrated laundry System (AMCILS) is proposed that uses a two phase water / water vapor system to allow good agitation of...

  16. A Typeful Integration of SQL into Curry

    Directory of Open Access Journals (Sweden)

    Michael Hanus

    2017-01-01

    Full Text Available We present an extension of the declarative programming language Curry to support the access to data stored in relational databases via SQL. Since Curry is statically typed, our emphasis on this SQL integration is on type safety. Our extension respects the type system of Curry so that run-time errors due to ill-typed data are avoided. This is obtained by preprocessing SQL statements at compile time and translating them into type-safe database access operations. As a consequence, the type checker of the Curry system can spot type errors in SQL statements at compile time. To generate appropriately typed access operations, the preprocessor uses an entity-relationship (ER model describing the structure of the relational data. In addition to standard SQL, SQL statements embedded in Curry can include program expressions and also relationships specified in the ER model. The latter feature is useful to avoid the error-prone use of foreign keys. As a result, our SQL integration supports a high-level and type-safe access to databases in Curry programs.

  17. Advances in the theory of box integrals

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David H.; Borwein, J.M.; Crandall, R.E.

    2009-06-25

    Box integrals - expectations <|{rvec r}|{sup s}> or <|{rvec r}-{rvec q}|{sup s}> over the unit n-cube (or n-box) - have over three decades been occasionally given closed forms for isolated n,s. By employing experimental mathematics together with a new, global analytic strategy, we prove that for n {le} 4 dimensions the box integrals are for any integer s hypergeometrically closed in a sense we clarify herein. For n = 5 dimensions, we show that a single unresolved integral we call K{sub 5} stands in the way of such hyperclosure proofs. We supply a compendium of exemplary closed forms that naturally arise algorithmically from this theory.

  18. Advanced techniques for efficient data integrity checking

    DEFF Research Database (Denmark)

    Martinenghi, Davide

    Integrity constraint checking, understood as the verification of data correctness and well-formedness conditions that must be satisfied in any state of a database, is not fully supported by current database technology. In a typical scenario, a database is required to comply with given semantic...... criteria (the integrity constraints) and to maintain the compliance each time data are updated. Since the introduction of the SQL2 standard, the SQL language started supporting assertions, which allow one to define general data consistency requirements expressing arbitrarily complex “business rules......” that may go beyond predefined constraints such as primary keys and foreign keys. General integrity constraints are, however, far from being widely available in commercial systems; in fact, their usage is commonly not encouraged, since the database management system would not be able to provide...

  19. Advancing Instructional Communication: Integrating a Biosocial Approach

    Science.gov (United States)

    Horan, Sean M.; Afifi, Tamara D.

    2014-01-01

    Celebrating 100 years of the National Communication Association necessitates that, as we commemorate our past, we also look toward our future. As part of a larger conversation about the future of instructional communication, this essay reinvestigates the importance of integrating biosocial approaches into instructional communication research. In…

  20. Recent advances in quantum integrable systems

    Energy Technology Data Exchange (ETDEWEB)

    Amico, L.; Belavin, A.; Buffenoir, E.; Castro Alvaredo, A.; Caudrelier, V.; Chakrabarti, A.; Corrig, E.; Crampe, N.; Deguchi, T.; Dobrev, V.K.; Doikou, A.; Doyon, B.; Feher, L.; Fioravanti, D.; Gohmann, F.; Hallnas, M.; Jimbo, M.; Konno, N.C.H.; Korchemsky, G.; Kulish, P.; Lassalle, M.; Maillet, J.M.; McCoy, B.; Mintchev, M.; Pakuliak, S.; Quano, F.Y.Z.; Ragnisco, R.; Ravanini, F.; Rittenberg, V.; Rivasseau, V.; Rossi, M.; Satta, G.; Sedrakyan, T.; Shiraishi, J.; Suzuki, N.C.J.; Yamada, Y.; Zamolodchikov, A.; Ishimoto, Y.; Nagy, Z.; Posta, S.; Sedra, M.B.; Zuevskiy, A.; Gohmann, F

    2005-07-01

    This meeting was dedicated to different aspects of the theory of quantum integrable systems. The organizers have intended to concentrate on topics related to the study of correlation functions, to systems with boundaries and to models at roots of unity. This document gathers the abstracts of 32 contributions, most of the contributions are accompanied by the set of transparencies.

  1. Recent advances in quantum integrable systems

    International Nuclear Information System (INIS)

    Amico, L.; Belavin, A.; Buffenoir, E.; Castro Alvaredo, A.; Caudrelier, V.; Chakrabarti, A.; Corrig, E.; Crampe, N.; Deguchi, T.; Dobrev, V.K.; Doikou, A.; Doyon, B.; Feher, L.; Fioravanti, D.; Gohmann, F.; Hallnas, M.; Jimbo, M.; Konno, N.C.H.; Korchemsky, G.; Kulish, P.; Lassalle, M.; Maillet, J.M.; McCoy, B.; Mintchev, M.; Pakuliak, S.; Quano, F.Y.Z.; Ragnisco, R.; Ravanini, F.; Rittenberg, V.; Rivasseau, V.; Rossi, M.; Satta, G.; Sedrakyan, T.; Shiraishi, J.; Suzuki, N.C.J.; Yamada, Y.; Zamolodchikov, A.; Ishimoto, Y.; Nagy, Z.; Posta, S.; Sedra, M.B.; Zuevskiy, A.; Gohmann, F.

    2005-01-01

    This meeting was dedicated to different aspects of the theory of quantum integrable systems. The organizers have intended to concentrate on topics related to the study of correlation functions, to systems with boundaries and to models at roots of unity. This document gathers the abstracts of 32 contributions, most of the contributions are accompanied by the set of transparencies

  2. Advanced structural integrity assessment procedures. Working material

    International Nuclear Information System (INIS)

    1994-01-01

    The purpose of the meeting was to provide an international forum for discussion on recent results in research and utility practice in the field of methodology for the structural integrity assessment of components including relevant non-codified procedures. The scope of the meeting included deterministic and probabilistic approaches. The papers covered the following topics: Leak-before-break concepts; non-destructive examination (NDE) and surveillance results; statistical evaluation of non-destructive examination data; pressurized thermal shock evaluation; fatigue effects (including vibration); and verification qualification. The meeting was attended by 32 specialists from 8 countries. Refs, figs and tabs

  3. Intensive integrated therapy of type 2 diabetes

    DEFF Research Database (Denmark)

    Gaede, Peter; Pedersen, Oluf

    2004-01-01

    The macro- and microvascular burden of type 2 diabetes is well established. A number of recent single risk factor intervention trials targeting hyperglycemia, dyslipidemia, hypertension, procoagulation, microalbumuria, and existing cardiovascular disorders have, however, shown major beneficial...... effects on long-term outcome. The results from these studies are anticipated to change the future management of type 2 diabetes, and most of the updated national guidelines for the treatment of type 2 diabetes recommend a multipronged approach driven by ambitious treatment targets. The outcome...... of this intensive integrated therapy has, however, only been investigated in a few studies of patients with type 2 diabetes. One of these trials, the Steno-2 Study, showed that intensive intervention for an average of 7.8 years cuts cardiovascular events as well as nephropathy, retinopathy, and autonomic neuropathy...

  4. Advances in Planar and Integrated Magnetics

    DEFF Research Database (Denmark)

    Ouyang, Ziwei

    ‐fashioned wire wound types, and thus planar magnetics, has in recent years, become increasingly popular in high frequency power converters. First, an overview of basic planar magnetics technology used in general dc‐dc converters is presented. PCB or flexible PCB windings as a main construction together...... with planar cores yield a number of advantages over the conventional magnetics. Meanwhile, some limitations of planar magnetics are also introduced. Secondly, fundamental characteristics of planar magnetics are investigated through winding conduction loss, core loss, leakage inductance and interwinding......The trend toward high power density, high operating frequency, and low profile in power converters has exposed a number of limitations in the use of conventional wirewound magnetic component structures. Transformers made of the planar principle eliminate virtually some shortcomings of old...

  5. Advances in NLTE modeling for integrated simulations

    Science.gov (United States)

    Scott, H. A.; Hansen, S. B.

    2010-01-01

    The last few years have seen significant progress in constructing the atomic models required for non-local thermodynamic equilibrium (NLTE) simulations. Along with this has come an increased understanding of the requirements for accurately modeling the ionization balance, energy content and radiative properties of different atomic species for a wide range of densities and temperatures. Much of this progress is the result of a series of workshops dedicated to comparing the results from different codes and computational approaches applied to a series of test problems. The results of these workshops emphasized the importance of atomic model completeness, especially in doubly-excited states and autoionization transitions, to calculating ionization balance, and the importance of accurate, detailed atomic data to producing reliable spectra. We describe a simple screened-hydrogenic model that calculates NLTE ionization balance with sufficient accuracy, at a low enough computational cost for routine use in radiation-hydrodynamics codes. The model incorporates term splitting, Δ n = 0 transitions, and approximate UTA widths for spectral calculations, with results comparable to those of much more detailed codes. Simulations done with this model have been increasingly successful at matching experimental data for laser-driven systems and hohlraums. Accurate and efficient atomic models are just one requirement for integrated NLTE simulations. Coupling the atomic kinetics to hydrodynamics and radiation transport constrains both discretizations and algorithms to retain energy conservation, accuracy and stability. In particular, the strong coupling between radiation and populations can require either very short time steps or significantly modified radiation transport algorithms to account for NLTE material response. Considerations such as these continue to provide challenges for NLTE simulations.

  6. Advances in NLTE Modeling for Integrated Simulations

    International Nuclear Information System (INIS)

    Scott, H.A.; Hansen, S.B.

    2009-01-01

    The last few years have seen significant progress in constructing the atomic models required for non-local thermodynamic equilibrium (NLTE) simulations. Along with this has come an increased understanding of the requirements for accurately modeling the ionization balance, energy content and radiative properties of different elements for a wide range of densities and temperatures. Much of this progress is the result of a series of workshops dedicated to comparing the results from different codes and computational approaches applied to a series of test problems. The results of these workshops emphasized the importance of atomic model completeness, especially in doubly excited states and autoionization transitions, to calculating ionization balance, and the importance of accurate, detailed atomic data to producing reliable spectra. We describe a simple screened-hydrogenic model that calculates NLTE ionization balance with surprising accuracy, at a low enough computational cost for routine use in radiation-hydrodynamics codes. The model incorporates term splitting, Δn = 0 transitions, and approximate UTA widths for spectral calculations, with results comparable to those of much more detailed codes. Simulations done with this model have been increasingly successful at matching experimental data for laser-driven systems and hohlraums. Accurate and efficient atomic models are just one requirement for integrated NLTE simulations. Coupling the atomic kinetics to hydrodynamics and radiation transport constrains both discretizations and algorithms to retain energy conservation, accuracy and stability. In particular, the strong coupling between radiation and populations can require either very short timesteps or significantly modified radiation transport algorithms to account for NLTE material response. Considerations such as these continue to provide challenges for NLTE simulations.

  7. CFD Analysis for Advanced Integrated Head Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Won Ho; Kang, Tae Kyo; Cho, Yeon Ho; Kim, Hyun Min [KEPCO Engineering and Construction Co., Daejeon (Korea, Republic of)

    2016-10-15

    The Integrated Head Assembly (IHA) is permanently installed on the reactor vessel closure head during the normal plant operation and refueling operation. It consists of a number of systems and components such as the head lifting system, seismic support system, Control Element Drive Mechanism (CEDM) cooling system, cable support system, cooling shroud assemblies. With the operating experiences of the IHA, the needs for the design change to the current APR1400 IHA arouse to improve the seismic resistance and to accommodate the convenient maintenance. In this paper, the effects of the design changes were rigorously studied for the various sizes of the inlet openings to assure the proper cooling of the CEDMs. And the system pressure differentials and required flow rate for the CEDM cooling fan were analyzed regarding the various operating conditions for determining the capacity of the fan. As a part of the design process of the AIHA, the number of air inlets and baffle regions are reduced by simplifying the design of the APR1400 IHA. The design change of the baffle regions has been made such that the maximum possible space are occupied inside the IHA cooling shroud shell while avoiding the interference with CEDMs. So, only the air inlet opening was studied for the design change to supply a sufficient cooling air flow for each CEDM. The size and location of the air inlets in middle cooling shroud assembly were determined by the CFD analyses of the AIHA. And the case CFD analyses were performed depending on the ambient air temperature and fan operating conditions. The size of the air inlet openings is increased by comparison with the initial AIHA design, and it is confirmed that the cooling air flow rate for each CEDM meet the design requirement of 800 SCFM ± 10% with the increased air inlets. At the initial analysis, the fan outlet flow rate was assumed as 48.3 lbm/s, but the result revealed that the less outflow rate at the fan is enough to meet the design requirement

  8. Intensive integrated therapy of type 2 diabetes

    DEFF Research Database (Denmark)

    Gaede, Peter; Pedersen, Oluf

    2004-01-01

    effects on long-term outcome. The results from these studies are anticipated to change the future management of type 2 diabetes, and most of the updated national guidelines for the treatment of type 2 diabetes recommend a multipronged approach driven by ambitious treatment targets. The outcome...... of this intensive integrated therapy has, however, only been investigated in a few studies of patients with type 2 diabetes. One of these trials, the Steno-2 Study, showed that intensive intervention for an average of 7.8 years cuts cardiovascular events as well as nephropathy, retinopathy, and autonomic neuropathy...... by about half when compared with a conventional multifactorial treatment. The challenge for now is to ensure that the trial experiences are widely adopted in daily clinical practice....

  9. ADVANCED COMPRESSOR ENGINE CONTROLS TO ENHANCE OPERATION, RELIABILITY AND INTEGRITY

    Energy Technology Data Exchange (ETDEWEB)

    Gary D. Bourn; Jess W. Gingrich; Jack A. Smith

    2004-03-01

    This document is the final report for the ''Advanced Compressor Engine Controls to Enhance Operation, Reliability, and Integrity'' project. SwRI conducted this project for DOE in conjunction with Cooper Compression, under DOE contract number DE-FC26-03NT41859. This report addresses an investigation of engine controls for integral compressor engines and the development of control strategies that implement closed-loop NOX emissions feedback.

  10. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  11. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  12. Elements of an advanced integrated operator control station

    International Nuclear Information System (INIS)

    Clarke, M.M.; Kreifeldt, J.G.

    1984-01-01

    One of the critical determinants of performance for any remotely operated maintenance system is the compatibility achieved between elements of the man/machine interface (e.g., master manipulator controller, controls, displays) and the human operator. In the Remote Control Engineering task of the Consolidated Fuel Reprocessing Program, considerable attention has been devoted to optimizing the man/machine interface of the operator control station. This system must be considered an integral element of the overall maintenance work system which includes transporters, manipulators, remote viewing, and other parts. The control station must reflect the integration of the operator team, control/ display panels, manipulator master controllers, and remote viewing monitors. Human factors principles and experimentation have been used in the development of an advanced integrated operator control station designed for the advance servomanipulator. Key features of this next-generation design are summarized in this presentation

  13. Elements of an advanced integrated operator control station

    International Nuclear Information System (INIS)

    Clarke, M.M.; Kreifeldt, J.G.

    1984-01-01

    One of the critical determinants of performance for any remotely operated maintenance system is the compatibility achieved between elements of the man/machine interface (e.g., master manipulator controller, controls, displays) and the human operator. In the remote control engineering task of the Consolidated Fuel Reprocessing Program, considerable attention has been devoted to optimizing the man/machine interface of the operator control station. This system must be considered an integral element of the overall maintenance work system which includes transporters, manipulators, remote viewing, and other parts. The control station must reflect the integration of the operator team, control/display panels, manipulator master controllers, and remote viewing monitors. Human factors principles and experimentation have been used in the development of an advanced integrated operator control station designed for the advance servomanipulator. Key features of this next-generation design are summarized in this presentation. 7 references, 4 figures

  14. Elements of an advanced integrated operator control station

    International Nuclear Information System (INIS)

    Clarke, M.M.; Kreifeldt, J.G.

    1984-01-01

    One of the critical determinants of peformance for any remotely operated maintenance system is the compatibility achieved between elements of the man/machine interface (e.g., master manipulator controller, controls, displays, etc.) and the human operator. In the Remote Control Engineering task of the Consolidated Fuel Reprocessing Program, considerable attention has been devoted to optimizing the man/machine interface of the operator control station. This system must be considered an integral element of the overall maintenance work system which includes transporters, manipulators, remote viewing, and other parts. The control station must reflect the integration of the operator team, control/display panels, manipulator master controllers, and remote viewing monitors. Human factors principles and experimentation have been used in the development of an advanced integrated operator control station designed for the advance servomanipulator. Key features of this next-generation design are summarized in this presentation. 7 references, 4 figures

  15. Structural integrity analyses: can we manage the advances?

    International Nuclear Information System (INIS)

    Sauve, R.

    2006-01-01

    Engineering has been one of a number of disciplines in which significant advances in analysis procedures has taken place in the last two decades. In particular, advances in computer technology and engineering software have revolutionized the assessment of component structural integrity for a wide range of applications. A significant development in computational mechanics directly related to computer technology that has had a profound impact on the field of structural integrity is the finite element method. The finite element method has re-defined and expanded the role of structural integrity assessments by providing comprehensive modelling capabilities to engineers involved in design and failure analyses. As computer processing speeds and capacity have increased, so has the role of computer modelling in assessments of component structural integrity. With new product development cycles shrinking, the role of initial testing is being reduced in favour of computer modelling and simulation to assess component life and durability. For ageing structures, the evaluation of remaining life and the impact of degraded structural integrity becomes tractable with the modern advances in computational methods. The areas of structural integrity that have derived great benefit from the advances in numerical techniques include stress analysis, fracture mechanics, dynamics, heat transfer, structural reliability, probabilistic methods and continuum mechanics in general. One of the salient features of the current methods is the ability to handle large complex steady state or transient dynamic problems that exhibit highly non-linear behaviour. With the ever-increasing usage of these advanced methods, the question is posed: Can we manage the advances? Better still are we managing the advances? As with all technological advances that enter mainstream use, comes the need for education, training and certification in the application of these methods, improved quality assurance procedures and

  16. Foundational development of an advanced nuclear reactor integrated safety code.

    Energy Technology Data Exchange (ETDEWEB)

    Clarno, Kevin (Oak Ridge National Laboratory, Oak Ridge, TN); Lorber, Alfred Abraham; Pryor, Richard J.; Spotz, William F.; Schmidt, Rodney Cannon; Belcourt, Kenneth (Ktech Corporation, Albuquerque, NM); Hooper, Russell Warren; Humphries, Larry LaRon

    2010-02-01

    This report describes the activities and results of a Sandia LDRD project whose objective was to develop and demonstrate foundational aspects of a next-generation nuclear reactor safety code that leverages advanced computational technology. The project scope was directed towards the systems-level modeling and simulation of an advanced, sodium cooled fast reactor, but the approach developed has a more general applicability. The major accomplishments of the LDRD are centered around the following two activities. (1) The development and testing of LIME, a Lightweight Integrating Multi-physics Environment for coupling codes that is designed to enable both 'legacy' and 'new' physics codes to be combined and strongly coupled using advanced nonlinear solution methods. (2) The development and initial demonstration of BRISC, a prototype next-generation nuclear reactor integrated safety code. BRISC leverages LIME to tightly couple the physics models in several different codes (written in a variety of languages) into one integrated package for simulating accident scenarios in a liquid sodium cooled 'burner' nuclear reactor. Other activities and accomplishments of the LDRD include (a) further development, application and demonstration of the 'non-linear elimination' strategy to enable physics codes that do not provide residuals to be incorporated into LIME, (b) significant extensions of the RIO CFD code capabilities, (c) complex 3D solid modeling and meshing of major fast reactor components and regions, and (d) an approach for multi-physics coupling across non-conformal mesh interfaces.

  17. Advanced remote handling for future applications: The advanced integrated maintenance system

    International Nuclear Information System (INIS)

    Herndon, J.N.; Kring, C.T.; Rowe, J.C.

    1986-01-01

    The Consolidated Fuel Reprocessing Program at Oak Ridge National Laboratory has been developing advanced techniques for remote maintenance of future US fuel reprocessing plants. The developed technology has a wide spectrum of application for other hazardous environments. These efforts are based on the application of teleoperated, force-reflecting servomanipulators for dexterous remote handling with television viewing for large-volume hazardous applications. These developments fully address the nonrepetitive nature of remote maintenance in the unstructured environments encountered in fuel reprocessing. This paper covers the primary emphasis in the present program; the design, fabrication, installation, and operation of a prototype remote handling system for reprocessing applications, the Advanced Integrated Maintenance System

  18. Human Exploration Spacecraft Testbed for Integration and Advancement (HESTIA)

    Science.gov (United States)

    Banker, Brian F.; Robinson, Travis

    2016-01-01

    The proposed paper will cover ongoing effort named HESTIA (Human Exploration Spacecraft Testbed for Integration and Advancement), led at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) to promote a cross-subsystem approach to developing Mars-enabling technologies with the ultimate goal of integrated system optimization. HESTIA also aims to develop the infrastructure required to rapidly test these highly integrated systems at a low cost. The initial focus is on the common fluids architecture required to enable human exploration of mars, specifically between life support and in-situ resource utilization (ISRU) subsystems. An overview of the advancements in both integrated technologies, in infrastructure, in simulation, and in modeling capabilities will be presented, as well as the results and findings of integrated testing,. Due to the enormous mass gear-ratio required for human exploration beyond low-earth orbit, (for every 1 kg of payload landed on Mars, 226 kg will be required on Earth), minimization of surface hardware and commodities is paramount. Hardware requirements can be minimized by reduction of equipment performing similar functions though for different subsystems. If hardware could be developed which meets the requirements of both life support and ISRU it could result in the reduction of primary hardware and/or reduction in spares. Minimization of commodities to the surface of mars can be achieved through the creation of higher efficiency systems producing little to no undesired waste, such as a closed-loop life support subsystem. Where complete efficiency is impossible or impractical, makeup commodities could be manufactured via ISRU. Although, utilization of ISRU products (oxygen and water) for crew consumption holds great promise of reducing demands on life support hardware, there exist concerns as to the purity and transportation of commodities. To date, ISRU has been focused on production rates and purities for

  19. Generalized Hermite-Hadamard type inequalities involving fractional integral operators.

    Science.gov (United States)

    Set, Erhan; Noor, Muhammed Aslam; Awan, Muhammed Uzair; Gözpinar, Abdurrahman

    2017-01-01

    In this article, a new general integral identity involving generalized fractional integral operators is established. With the help of this identity new Hermite-Hadamard type inequalities are obtained for functions whose absolute values of derivatives are convex. As a consequence, the main results of this paper generalize the existing Hermite-Hadamard type inequalities involving the Riemann-Liouville fractional integral.

  20. Shared or Integrated: Which Type of Integration is More Effective Improves Students’ Creativity?

    Science.gov (United States)

    Mariyam, M.; Kaniawati, I.; Sriyati, S.

    2017-09-01

    Integrated science learning has various types of integration. This study aims to apply shared and integrated type of integration with project based learning (PjBL) model to improve students’ creativity on waste recycling theme. The research method used is a quasi experiment with the matching-only pre test-post test design. The samples of this study are 108 students consisting of 36 students (experiment class 1st), 35 students (experiment class 2nd) and 37 students (control class 3rd) at one of Junior High School in Tanggamus, Lampung. The results show that there is difference of creativity improvement in the class applied by PjBL model with shared type of integration, integrated type of integration and without any integration in waste recycling theme. Class applied by PjBL model with shared type of integration has the higher creativity improvement than the PjBL model with integrated type of integration and without any integration. Integrated science learning using shared type only combines 2 lessons, hence an intact concept is resulted. So, PjBL model with shared type of integration more effective improves students’ creativity than integrated type.

  1. Integration of advanced feedback control techniques on Tore Supra

    International Nuclear Information System (INIS)

    Barana, O.; Basiuk, V.; Bucalossi, J.

    2006-01-01

    Tore Supra tokamak plays an important role in development and optimisation of steady-state scenarios. Its real-time feedback control system is a key instrument to improve plasma performances. For this reason, new feedback control schemes have been recently put into operation and others are being developed. This work deals with the implementation in Tore Supra of these advanced algorithms, reports the technical details and shows the first positive results that have been achieved. For instance, encouraging results have been obtained in the field of profiles control. Controls of the full width at half maximum of the suprathermal electrons local emission profile at very low loop voltage and of the maximum of the thermal Larmor radius, normalised to the characteristic length of the electron temperature gradient, have been attained. While the first quantity can be directly associated to the current profile, the second one characterises the pressure profile. A new feedback control algorithm, employed to maximise a given quantity by means of a '' Search Optimisation '' technique, has been effectively tested too: the hard X-ray width has been maximised with simultaneous use of lower hybrid heating power and wave parallel index as actuators. These and other promising results, whose detailed description will be given in the article, have been obtained thanks to the real-time availability of several diagnostic systems. Using a shared memory network as communication layer, they send their measurements to a central computing unit that, in its turn, dispatches the necessary requirements to the actuators. A key issue is the possibility to integrate these controls in such a way as to cope with different requests at the same time. As an example, simultaneous control of the plasma current by means of the lower hybrid heating power, of the loop voltage by means of the poloidal field system and of the hard X-ray width through the lower hybrid heating phase shift has been successfully

  2. Holistic integrative medicine: toward a new era of medical advancement.

    Science.gov (United States)

    Fan, Daiming

    2017-03-01

    Medicine has encountered unprecedented problems associated with changes in nature, society, and environment, as well as with new human quests for survival, longevity, and health. In the meantime, the development of medicine is facing challenges that resulted from the over-division and specialization of disciplines and the fragmentation of medical knowledge. To construct a new medical system that is more suitable for human health and disease treatment, holistic integrative medicine (HIM), which regards the human body as a holistic entity, organically integrates the most advanced knowledge and theories in each medical field and the most effective practices in various clinical specialties to revise and adjust on the basis of social, environmental, and psychological conditions. HIM is the inevitable and necessary direction for the future development of medicine. In this article, we illustrated the connotation of HIM, the differences between HIM and other medical conceptions, and the practice of HIM in recent years.

  3. Integration of Advanced Simulation and Visualization for Manufacturing Process Optimization

    Science.gov (United States)

    Zhou, Chenn; Wang, Jichao; Tang, Guangwu; Moreland, John; Fu, Dong; Wu, Bin

    2016-05-01

    The integration of simulation and visualization can provide a cost-effective tool for process optimization, design, scale-up and troubleshooting. The Center for Innovation through Visualization and Simulation (CIVS) at Purdue University Northwest has developed methodologies for such integration with applications in various manufacturing processes. The methodologies have proven to be useful for virtual design and virtual training to provide solutions addressing issues on energy, environment, productivity, safety, and quality in steel and other industries. In collaboration with its industrial partnerships, CIVS has provided solutions to companies, saving over US38 million. CIVS is currently working with the steel industry to establish an industry-led Steel Manufacturing Simulation and Visualization Consortium through the support of National Institute of Standards and Technology AMTech Planning Grant. The consortium focuses on supporting development and implementation of simulation and visualization technologies to advance steel manufacturing across the value chain.

  4. New integrable PDEs of boomeronic type

    International Nuclear Information System (INIS)

    Calogero, F; Degasperis, A

    2006-01-01

    Novel integrable systems of coupled first-order autonomous PDEs in 1 + 1 dimensions (space x and time t) are presented. Integrable covariant 2-vector and 3-vector PDEs, as well as higher-order integrable PDEs for a single, or a couple, of scalar-dependent variables (including an extension of the sine-Gordon equation and a remarkably neat, highly nonlinear third-order PDE), are also obtained by appropriate reductions of the basic matrix equations. The Lax pairs that characterize the integrable character of the basic matrix PDEs are also exhibited, as well as their single-soliton solutions. These solitons generally exhibit the boomeronic (and, less generically, the trapponic) phenomenology, namely they do not move uniformly, but rather (in an appropriate reference system) come in from one end in the remote past and boomerang back to that same end in the remote future (boomerons), or are trapped to oscillate around a value fixed by the initial data (trappons)

  5. An extended Halanay inequality of integral type on time scales

    Directory of Open Access Journals (Sweden)

    Boqun Ou

    2015-07-01

    Full Text Available In this paper, we obtain a Halanay-type inequality of integral type on time scales which improves and extends some earlier results for both the continuous and discrete cases. Several illustrative examples are also given.

  6. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Waste Integrated Performance and Safety Codes (IPSC): FY10 development and integration

    International Nuclear Information System (INIS)

    Criscenti, Louise Jacqueline; Sassani, David Carl; Arguello, Jose Guadalupe Jr.; Dewers, Thomas A.; Bouchard, Julie F.; Edwards, Harold Carter; Freeze, Geoffrey A.; Wang, Yifeng; Schultz, Peter Andrew

    2011-01-01

    This report describes the progress in fiscal year 2010 in developing the Waste Integrated Performance and Safety Codes (IPSC) in support of the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. The goal of the Waste IPSC is to develop an integrated suite of computational modeling and simulation capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive waste storage or disposal system. The Waste IPSC will provide this simulation capability (1) for a range of disposal concepts, waste form types, engineered repository designs, and geologic settings, (2) for a range of time scales and distances, (3) with appropriate consideration of the inherent uncertainties, and (4) in accordance with robust verification, validation, and software quality requirements. Waste IPSC activities in fiscal year 2010 focused on specifying a challenge problem to demonstrate proof of concept, developing a verification and validation plan, and performing an initial gap analyses to identify candidate codes and tools to support the development and integration of the Waste IPSC. The current Waste IPSC strategy is to acquire and integrate the necessary Waste IPSC capabilities wherever feasible, and develop only those capabilities that cannot be acquired or suitably integrated, verified, or validated. This year-end progress report documents the FY10 status of acquisition, development, and integration of thermal-hydrologic-chemical-mechanical (THCM) code capabilities, frameworks, and enabling tools and infrastructure.

  7. Nuclear Energy Advanced Modeling and Simulation (NEAMS) Waste Integrated Performance and Safety Codes (IPSC) : FY10 development and integration.

    Energy Technology Data Exchange (ETDEWEB)

    Criscenti, Louise Jacqueline; Sassani, David Carl; Arguello, Jose Guadalupe, Jr.; Dewers, Thomas A.; Bouchard, Julie F.; Edwards, Harold Carter; Freeze, Geoffrey A.; Wang, Yifeng; Schultz, Peter Andrew

    2011-02-01

    This report describes the progress in fiscal year 2010 in developing the Waste Integrated Performance and Safety Codes (IPSC) in support of the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. The goal of the Waste IPSC is to develop an integrated suite of computational modeling and simulation capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive waste storage or disposal system. The Waste IPSC will provide this simulation capability (1) for a range of disposal concepts, waste form types, engineered repository designs, and geologic settings, (2) for a range of time scales and distances, (3) with appropriate consideration of the inherent uncertainties, and (4) in accordance with robust verification, validation, and software quality requirements. Waste IPSC activities in fiscal year 2010 focused on specifying a challenge problem to demonstrate proof of concept, developing a verification and validation plan, and performing an initial gap analyses to identify candidate codes and tools to support the development and integration of the Waste IPSC. The current Waste IPSC strategy is to acquire and integrate the necessary Waste IPSC capabilities wherever feasible, and develop only those capabilities that cannot be acquired or suitably integrated, verified, or validated. This year-end progress report documents the FY10 status of acquisition, development, and integration of thermal-hydrologic-chemical-mechanical (THCM) code capabilities, frameworks, and enabling tools and infrastructure.

  8. Seawater desalination using an advanced small integral reactor - SMART

    International Nuclear Information System (INIS)

    Hwang, Young Dong; Chang, Moon Hee; Lee, Man Ki

    1999-01-01

    A concept of a dual-purpose integrated nuclear desalination plant coupled with the advanced small integral reactor SMART was established. The design concept of the plant aims to produce 40,000m 5 /day of water with the MED process and to generate about 90 MWe of electricity. In order to examine the technical, economic, and safety considerations in coupling SMART with desalination, a preliminary analysis on water production costs and a safety review of potential disturbances of the integrated nuclear desalination plant have been performed. The results of economic evaluation show that the use of SMART for seawater desalination is either comparative to or more economical, with respect to the water production cost, than the use of fossil fuels in comparison with the data published by the IAEA. It was also found that any possible transient event of the desalination plant does not impact on the reactor safety. The key safety parameters of the transient events induced by the potential disturbances of the desalination plant are bounded by the limits of safety analysis of SMART

  9. Seawater desalination using an advanced small integral reactor - SMART

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Young Dong; Chang, Moon Hee; Lee, Man Ki [KAERI, Taejon (Korea, Republic of)

    1999-05-01

    A concept of a dual-purpose integrated nuclear desalination plant coupled with the advanced small integral reactor SMART was established. The design concept of the plant aims to produce 40,000m{sup 5}/day of water with the MED process and to generate about 90 MWe of electricity. In order to examine the technical, economic, and safety considerations in coupling SMART with desalination, a preliminary analysis on water production costs and a safety review of potential disturbances of the integrated nuclear desalination plant have been performed. The results of economic evaluation show that the use of SMART for seawater desalination is either comparative to or more economical, with respect to the water production cost, than the use of fossil fuels in comparison with the data published by the IAEA. It was also found that any possible transient event of the desalination plant does not impact on the reactor safety. The key safety parameters of the transient events induced by the potential disturbances of the desalination plant are bounded by the limits of safety analysis of SMART.

  10. Advances in the project about Pin type silicon radiation detectors

    International Nuclear Information System (INIS)

    Ramirez F, J.; Cerdeira, A.; Aceves, M.; Diaz, A.; Estrada, M.; Rosales, P.; Cabal, A.E.; Montano L, M.; Leyva, A.

    1998-01-01

    The obtained advances in the collaboration project ININ-CINVESTAV about development of Pin type semiconductor radiation detectors here are presented. It has been characterized the response to different types of radiation made in CINVESTAV and INAOE. Measurements have been realized with different types of sensitive to charge preamplifiers determining the main characteristics which must be executed to be able to be employed with low capacitance detectors. As applications it has been possible to measure the irradiation time in a mammography machine and X-ray energy spectra have been obtained in the order of 14 KeV, with 4 KeV at ambient temperature. The future actions of project have been indicated and the possible applications of these detectors. (Author)

  11. Advances in Integrated Plasma Control on DIII-D

    International Nuclear Information System (INIS)

    Walker, M.L.; Ferron, J.R.; Humphreys, D.A.

    2006-01-01

    The DIII-D experimental program in advanced tokamak (AT) physics requires extremely high performance from the DIII-D plasma control system (PCS) [B.G.Penaflor, et al., 4 th IAEA Tech. Mtg on Control and Data Acq., San Diego, CA (2003)], including simultaneous and highly accurate regulation of plasma shape, stored energy, density, and divertor characteristics, as well as coordinated suppression of magnetohydrodynamic instabilities. To satisfy these demanding control requirements, we apply the integrated plasma control method, consisting of construction of physics-based plasma and system response models, validation of models against operating experiments, design of integrated controllers that operate in concert with one another as well as with supervisory modules, simulation of control action against off-line and actual machine control platforms, and optimization through iteration of the design-test loop. The present work describes progress in development of physics models and development and experimental application of several new model-based plasma controllers on DIII-D. We discuss experimental use of advanced shape control algorithms containing nonlinear techniques for improving control of steady state plasmas, model-based controllers for optimal rejection of edge localized mode disturbances during resistive wall mode stabilization, model-based controllers for neoclassical tearing mode stabilization, including methods for maximizing stabilization effectiveness with substantial constraints on available power, model-based integrated control of plasma rotation and beta, and initial experience in development of model-based controllers for advanced tokamak current profile modification. The experience gained from DIII-D has been applied to the development of control systems for the EAST and KSTAR tokamaks. We describe the development of the control software, hardware, and model-based control algorithms for these superconducting tokamaks, with emphasis on relevance of

  12. On Opial-Type Integral Inequalities

    Directory of Open Access Journals (Sweden)

    Zhao Chang-Jian

    2007-01-01

    Full Text Available We establish some new Opial-type inequalities involving functions of two and many independent variables. Our results in special cases yield some of the recent results on Opial's inequality and also provide new estimates on inequalities of this type.

  13. Advanced data analysis in neuroscience integrating statistical and computational models

    CERN Document Server

    Durstewitz, Daniel

    2017-01-01

    This book is intended for use in advanced graduate courses in statistics / machine learning, as well as for all experimental neuroscientists seeking to understand statistical methods at a deeper level, and theoretical neuroscientists with a limited background in statistics. It reviews almost all areas of applied statistics, from basic statistical estimation and test theory, linear and nonlinear approaches for regression and classification, to model selection and methods for dimensionality reduction, density estimation and unsupervised clustering.  Its focus, however, is linear and nonlinear time series analysis from a dynamical systems perspective, based on which it aims to convey an understanding also of the dynamical mechanisms that could have generated observed time series. Further, it integrates computational modeling of behavioral and neural dynamics with statistical estimation and hypothesis testing. This way computational models in neuroscience are not only explanat ory frameworks, but become powerfu...

  14. Women's career advancement in organisations: Integrative framework for research

    Directory of Open Access Journals (Sweden)

    Mišić-Andrić Marijana

    2015-01-01

    Full Text Available Contemporary organisations, caught in the middle of global economic and social crisis, are facing different business challenges, having to respond to quick changes in business environment and demographic changes in workforce composed by increasing number of women. Although the number of women in workforce is on the rise, they are still underrepresented in manager positions, especially higher management. This implies that certain barriers are in place which makes difficult for women to develop their careers, especially in reaching manager positions. The aim of this paper is to analyse and present a theoretical framework for further study of professional carrier advancement for women. The paper especially analyse integrative theoretical framework which stresses the equal importance of researching individual factors (personal influence and organisational factors (social inclusion, having in mind how the organisational context can improve or deter women's carrier. The paper presents possible directions for future research based on the analysis of the theoretical framework and especially individual and organisational factors.

  15. Advanced applications of boundary-integral equation methods

    International Nuclear Information System (INIS)

    Cruse, T.A.; Wilson, R.B.

    1978-01-01

    Numerical analysis has become the basic tool for both design and research problems in solid mechanics. The need for accuracy and detail, plus the availablity of the high speed computer has led to the development of many new modeling methods ranging from general purpose structural analysis finite element programs to special purpose research programs. The boundary-integral equation (BIE) method is based on classical mathematical techniques but is finding new life as a basic stress analysis tool for engineering applications. The paper summarizes some advanced elastic applications of fracture mechanics and three-dimensional stress analysis, while referencing some of the much broader developmental effort. Future emphasis is needed to exploit the BIE method in conjunction with other techniques such as the finite element method through the creation of hybrid stress analysis methods. (Auth.)

  16. Intensive integrated therapy of type 2 diabetes

    DEFF Research Database (Denmark)

    Gaede, Peter; Pedersen, Oluf

    2004-01-01

    The macro- and microvascular burden of type 2 diabetes is well established. A number of recent single risk factor intervention trials targeting hyperglycemia, dyslipidemia, hypertension, procoagulation, microalbumuria, and existing cardiovascular disorders have, however, shown major beneficial...

  17. Advances in Integrated Vehicle Thermal Management and Numerical Simulation

    Directory of Open Access Journals (Sweden)

    Yan Wang

    2017-10-01

    Full Text Available With the increasing demands for vehicle dynamic performance, economy, safety and comfort, and with ever stricter laws concerning energy conservation and emissions, vehicle power systems are becoming much more complex. To pursue high efficiency and light weight in automobile design, the power system and its vehicle integrated thermal management (VITM system have attracted widespread attention as the major components of modern vehicle technology. Regarding the internal combustion engine vehicle (ICEV, its integrated thermal management (ITM mainly contains internal combustion engine (ICE cooling, turbo-charged cooling, exhaust gas recirculation (EGR cooling, lubrication cooling and air conditioning (AC or heat pump (HP. As for electric vehicles (EVs, the ITM mainly includes battery cooling/preheating, electric machines (EM cooling and AC or HP. With the rational effective and comprehensive control over the mentioned dynamic devices and thermal components, the modern VITM can realize collaborative optimization of multiple thermodynamic processes from the aspect of system integration. Furthermore, the computer-aided calculation and numerical simulation have been the significant design methods, especially for complex VITM. The 1D programming can correlate multi-thermal components and the 3D simulating can develop structuralized and modularized design. Additionally, co-simulations can virtualize simulation of various thermo-hydraulic behaviors under the vehicle transient operational conditions. This article reviews relevant researching work and current advances in the ever broadening field of modern vehicle thermal management (VTM. Based on the systematic summaries of the design methods and applications of ITM, future tasks and proposals are presented. This article aims to promote innovation of ITM, strengthen the precise control and the performance predictable ability, furthermore, to enhance the level of research and development (R&D.

  18. Cooperative Research and Development for Advanced Microturbines Program on Advanced Integrated Microturbine System

    Energy Technology Data Exchange (ETDEWEB)

    Michael J. Bowman

    2007-05-30

    The Advanced Integrated Microturbine Systems (AIMS) project was kicked off in October of 2000 to develop the next generation microturbine system. The overall objective of the project was to develop a design for a 40% electrical efficiency microturbine system and demonstrate many of the enabling technologies. The project was initiated as a collaborative effort between several units of GE, Elliott Energy Systems, Turbo Genset, Oak Ridge National Lab and Kyocera. Since the inception of the project the partners have changed but the overall direction of the project has stayed consistent. The project began as a systems study to identify design options to achieve the ultimate goal of 40% electrical efficiency. Once the optimized analytical design was identified for the 40% system, it was determined that a 35% efficient machine would be capable of demonstrating many of the advanced technologies within the given budget and timeframe. The items that would not be experimentally demonstrated were fully produced ceramic parts. However, to understand the requirements of these ceramics, an effort was included in the project to experimentally evaluate candidate materials in representative conditions. The results from this effort would clearly identify the challenges and improvement required of these materials for the full design. Following the analytical effort, the project was dedicated to component development and testing. Each component and subsystem was designed with the overall system requirements in mind and each tested to the fullest extent possible prior to being integrated together. This method of component development and evaluation helps to minimize the technical risk of the project. Once all of the components were completed, they were assembled into the full system and experimentally evaluated.

  19. Recent advancements in sputter-type heavy negative ion sources

    International Nuclear Information System (INIS)

    Alton, G.D.

    1989-01-01

    Significant advancement have been made in sputter-type negative ion sources which utilize direct surface ionization, or a plasma to form the positive ion beam used to effect sputtering of samples containing the material of interest. Typically, such sources can be used to generate usable beam intensities of a few μA to several mA from all chemically active elements, depending on the particular source and the electron affinity of the element in question. The presentation will include an introduction to the fundamental processes underlying negative ion formation by sputtering from a low work function surface and several sources will be described which reflect the progress made in this technology. 21 refs., 9 figs., 1 tab

  20. Molecular integrals for slater type orbitals using coulomb sturmians

    DEFF Research Database (Denmark)

    Avery, James Emil; Avery, John Scales

    2014-01-01

    The use of Slater type orbitals in molecular calculations is hindered by the slowness of integral evaluation. In the present paper, we introduce a method for overcoming this problem by expanding STO's in terms of Coulomb Sturmians, for which the problem of evaluating molecular integrals rapidly has...... been satisfactorily solved using methods based on the theory of hyperspherical harmonics....

  1. Integration of advanced teleoperation technologies for control of space robots

    Science.gov (United States)

    Stagnaro, Michael J.

    1993-01-01

    Teleoperated robots require one or more humans to control actuators, mechanisms, and other robot equipment given feedback from onboard sensors. To accomplish this task, the human or humans require some form of control station. Desirable features of such a control station include operation by a single human, comfort, and natural human interfaces (visual, audio, motion, tactile, etc.). These interfaces should work to maximize performance of the human/robot system by streamlining the link between human brain and robot equipment. This paper describes development of a control station testbed with the characteristics described above. Initially, this testbed will be used to control two teleoperated robots. Features of the robots include anthropomorphic mechanisms, slaving to the testbed, and delivery of sensory feedback to the testbed. The testbed will make use of technologies such as helmet mounted displays, voice recognition, and exoskeleton masters. It will allow tor integration and testing of emerging telepresence technologies along with techniques for coping with control link time delays. Systems developed from this testbed could be applied to ground control of space based robots. During man-tended operations, the Space Station Freedom may benefit from ground control of IVA or EVA robots with science or maintenance tasks. Planetary exploration may also find advanced teleoperation systems to be very useful.

  2. Integrated Refrigeration and Storage for Advanced Liquid Hydrogen Operations

    Science.gov (United States)

    Swanger, A. M.; Notardonato, W. U.; Johnson, W. L.; Tomsik, T. M.

    2016-01-01

    NASA has used liquefied hydrogen (LH2) on a large scale since the beginning of the space program as fuel for the Centaur and Apollo upper stages, and more recently to feed the three space shuttle main engines. The LH2 systems currently in place at the Kennedy Space Center (KSC) launch pads are aging and inefficient compared to the state-of-the-art. Therefore, the need exists to explore advanced technologies and operations that can drive commodity costs down, and provide increased capabilities. The Ground Operations Demonstration Unit for Liquid Hydrogen (GODU-LH2) was developed at KSC to pursue these goals by demonstrating active thermal control of the propellant state by direct removal of heat using a cryocooler. The project has multiple objectives including zero loss storage and transfer, liquefaction of gaseous hydrogen, and densification of liquid hydrogen. The key technology challenge was efficiently integrating the cryogenic refrigerator into the LH2 storage tank. A Linde LR1620 Brayton cycle refrigerator is used to produce up to 900W cooling at 20K, circulating approximately 22 g/s gaseous helium through the hydrogen via approximately 300 m of heat exchanger tubing. The GODU-LH2 system is fully operational, and is currently under test. This paper will discuss the design features of the refrigerator and storage system, as well as the current test results.

  3. Intervention types and outcomes of integrated care for diabetes mellitus type 2 : A systematic review

    NARCIS (Netherlands)

    Busetto, L.; Luijkx, K.G.; Elissen, A.M.J.; Vrijhoef, H.J.M.

    2016-01-01

    Rationale, aims and objectives The delivery of integrated care is a priority in many countries' efforts to improve health outcomes for people at risk of or with diabetes. This study aims to provide an overview of the different types of integrated care interventions for type 2 diabetes and to report

  4. Peptide Immunotherapy for Type 1 Diabetes—Clinical Advances

    Science.gov (United States)

    Smith, Emma L.; Peakman, Mark

    2018-01-01

    Autoimmune and allergic diseases occur when an individual mounts an inappropriate immune response to a self-antigen or an innocuous environmental antigen. This triggers a pathogenic T-cell response resulting in damage to specific tissues and organs. In type 1 diabetes (T1D), this manifests as destruction of the insulin-secreting β cells, resulting in a life-long dependency on recombinant insulin. Modulation of the pathogenic T-cell response with antigen-specific peptide immunotherapy offers the potential to restore the immune homeostasis and prevent further tissue destruction. Recent clinical advances with peptide therapy approaches in both T1D and other diseases are beginning to show encouraging results. New technologies targeting the peptides to specific cell types are also moving from pre-clinical development to the clinic. While many challenges remain in clinical development, not least selection of the optimal dose and dosing frequency, this is clearly becoming a very active field of drug development. PMID:29541078

  5. Solvability of nonlinear integral equations of product type

    Directory of Open Access Journals (Sweden)

    Bilal Boulfoul

    2018-01-01

    Full Text Available This article concerns nonlinear functional integral equations of product type. The first two equations set on a the positive half-axis encompass different classes of nonlinear integral equations and may involve the product of finitely many integral functions. The existence of integrable solutions is based on improved versions of Krasnoselskii's fixed point theorem combined with techniques of measure of weak noncompactness and some elements from functional analysis. The third one is an integro-differential equation set on a bounded interval, for which the existence of absolutely continuous solutions is provided. Examples show the applicability of our results.

  6. Controllability of Urysohn integral inclusions of Volterra type

    Directory of Open Access Journals (Sweden)

    Thomas S. Angell

    2010-06-01

    Full Text Available The aim of this paper is to study the controllability of a system described by an integral inclusion of Urysohn type with delay. In our approach we reduce the controllability problem of the nonlinear system into solvability problem of another integral inclusion. The solvability of this integral inclusion is subsequently established by imposing suitable standard boundedness, convexity and semicontinuity conditions on the set-valued mapping defining the integral inclusion, and by employing Bohnenblust-Karlin extension of Kakutani's fixed point theorem for set-valued mappings.

  7. A New Riemann Type Hydrodynamical Hierarchy and its Integrability Analysis

    International Nuclear Information System (INIS)

    Golenia, Jolanta Jolanta; Bogolubov, Nikolai N. Jr.; Popowicz, Ziemowit; Pavlov, Maxim V.; Prykarpatsky, Anatoliy K.

    2009-12-01

    Short-wave perturbations in a relaxing medium, governed by a special reduction of the Ostrovsky evolution equation, and later derived by Whitham, are studied using the gradient-holonomic integrability algorithm. The bi-Hamiltonicity and complete integrability of the corresponding dynamical system is stated and an infinite hierarchy of commuting to each other conservation laws of dispersive type are found. The well defined regularization of the model is constructed and its Lax type integrability is discussed. A generalized hydrodynamical Riemann type system is considered, infinite hierarchies of conservation laws, related compatible co-symplectic structures and Lax type representations for the special cases N = 2, 3 and N = 4 are constructed. (author)

  8. Advances in pharmacologic therapies for type 2 diabetes.

    Science.gov (United States)

    Morsink, Linde M; Smits, Mark M; Diamant, Michaela

    2013-02-01

    Type 2 diabetes (T2DM) is a multi-causal, heterogeneous and progressive cardiometabolic condition, with an increasing prevalence worldwide. T2DM is associated with multiple comorbidities that may impact patients' quality of life. Treatment is multifactorial, but pharmacologic treatment of hyperglycemia is still regarded as the mainstay of diabetes management. Current established therapies include metformin, sulfonylurea agents and insulin, the long-term use of which was associated with reduced micro- and macrovascular events in the United Kingdom Prospective Diabetes Study. Despite major recent advances in diabetes care, a large proportion of patients remain in poor glycemic control, necessitating the development of new therapeutic options. The recently published position statement of the American Diabetes Association and European Association for the Study of Diabetes for the management of hyperglycemia in T2DM has accommodated this wider range of therapy choices, as it is less prescriptive and advocates an individualized treatment approach, taking into account many relevant patient- and disease-related factors. This review summarizes the updates on various established agents as well as the recent developments with regard to incretin-based therapies, inhibitors of the renal tubular sodium-glucose-linked-transporter-2 and ultra-long acting basal insulin formulations.

  9. Description of the advanced gas cooled type of reactor (AGR)

    International Nuclear Information System (INIS)

    Nonboel, E.

    1996-11-01

    The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs

  10. ADVANCED DRIVER SAFETY SUPPORT SYSTEMS FOR THE URBAN TYPE VEHICLE

    Directory of Open Access Journals (Sweden)

    Katarzyna JEZIERSKA-KRUPA

    2015-12-01

    Full Text Available Smart Power Team is currently working on the design of an urban electric vehicle designed to compete in the Shell Eco-marathon. One important aspect of this type of vehicle characteristics is it safety. The project of advanced driver assistance systems has included some proposals of such systems and the concept of their execution. The first concept, BLIS (Blind Spot Information System, is to build a system of informing a driver about vehicles appearing in the blind spot. The system constitutes a second concept, CDIS (Collision Detection and Information System, and it is designed to detect a vehicle collision and inform the team. Further systems are: DPMS (Dew Point Measurement System - a system which does not allow a situation, where the windows are fogged, OHRS (Overtaking Horn Reminder System - a system which checks overtaking and MSS (main supervision system - a supervisory system. These concepts are based on the assumption of the use of laser sensors, photoelectric, humidity and temperature, and other commercially available systems. The article presents a detailed description of driver assistance systems and virtual prototyping methodology for these systems, as well as the numerical results of the verification of one of the systems.

  11. Grid Integration Studies: Advancing Clean Energy Planning and Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Jessica [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chernyakhovskiy, Ilya [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Integrating significant variable renewable energy (VRE) into the grid requires an evolution in power system planning and operation. To plan for this evolution, power system stakeholders can undertake grid integration studies. This Greening the Grid document reviews grid integration studies, common elements, questions, and guidance for system planners.

  12. Zeroes of functions of Fresnel complementary integral type

    Directory of Open Access Journals (Sweden)

    Mario Alberto Villalobos Arias

    2017-02-01

    Full Text Available Theoretical upper and lower bounds are established for zeroes of a parametric family of functions which are defined by integrals of the same type as  the Fresnel complementary integral. Asymptotic properties for these bounds are obtained as well as monotony properties of the localization  intervals.  Given the value of the parameter an analytical-numerical procedure is deduced to enclose all  zeros of a given function with an a priori error.

  13. Improving blood donor recruitment and retention: integrating theoretical advances from social and behavioral science research agendas.

    Science.gov (United States)

    Ferguson, Eamonn; France, Christopher R; Abraham, Charles; Ditto, Blaine; Sheeran, Paschal

    2007-11-01

    Increasing blood donor recruitment and retention is of key importance to transfusion services. Research within the social and behavioral science traditions has adopted separate but complementary approaches to addressing these issues. This article aims to review both of these types of literature, examine theoretical developments, identify commonalities, and offer a means to integrate these within a single intervention approach. The social and behavioral science literature on blood donor recruitment and retention focusing on theory, interventions, and integration is reviewed. The role of emotional regulation (anticipated anxiety and vasovagal reactions) is central to both the behavioral and the social science approaches to enhancing donor motivation, yet although intentions are the best predictor of donor behavior, interventions targeting enactment of intentions have not been used to increase donation. Implementation intentions (that is, if-then plans formed in advance of acting) provide a useful technique to integrate findings from social and behavioral sciences to increase donor recruitment and retention. After reviewing the literature, implementation intention formation is proposed as a technique to integrate the key findings and theories from the behavioral and social science literature on blood donor recruitment and retention.

  14. AN ADVANCED TOOL FOR APPLIED INTEGRATED SAFETY MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    Potts, T. Todd; Hylko, James M.; Douglas, Terence A.

    2003-02-27

    WESKEM, LLC's Environmental, Safety and Health (ES&H) Department had previously assessed that a lack of consistency, poor communication and using antiquated communication tools could result in varying operating practices, as well as a failure to capture and disseminate appropriate Integrated Safety Management (ISM) information. To address these issues, the ES&H Department established an Activity Hazard Review (AHR)/Activity Hazard Analysis (AHA) process for systematically identifying, assessing, and controlling hazards associated with project work activities during work planning and execution. Depending on the scope of a project, information from field walkdowns and table-top meetings are collected on an AHR form. The AHA then documents the potential failure and consequence scenarios for a particular hazard. Also, the AHA recommends whether the type of mitigation appears appropriate or whether additional controls should be implemented. Since the application is web based, the information is captured into a single system and organized according to the >200 work activities already recorded in the database. Using the streamlined AHA method improved cycle time from over four hours to an average of one hour, allowing more time to analyze unique hazards and develop appropriate controls. Also, the enhanced configuration control created a readily available AHA library to research and utilize along with standardizing hazard analysis and control selection across four separate work sites located in Kentucky and Tennessee. The AHR/AHA system provides an applied example of how the ISM concept evolved into a standardized field-deployed tool yielding considerable efficiency gains in project planning and resource utilization. Employee safety is preserved through detailed planning that now requires only a portion of the time previously necessary. The available resources can then be applied to implementing appropriate engineering, administrative and personal protective equipment

  15. Different Types of Attacks on Integrated MANET-Internet Communication

    OpenAIRE

    Abhay Kumar Rai, Rajiv Ranjan Tewari & Saurabh Kant Upadhyay

    2010-01-01

    Security is an important issue in the integrated MANET-Internet environment because inthis environment we have to consider the attacks on Internet connectivity and also onthe ad hoc routing protocols. The focus of this work is on different types of attacks onintegrated MANET-Internet communication. We consider most common types of attackson mobile ad hoc networks and on access point through which MANET is connected tothe Internet. Specifically, we study how different attacks affect the perfor...

  16. Advancing research on animal-transported subsidies by integrating animal movement and ecosystem modelling.

    Science.gov (United States)

    Earl, Julia E; Zollner, Patrick A

    2017-09-01

    Connections between ecosystems via animals (active subsidies) support ecosystem services and contribute to numerous ecological effects. Thus, the ability to predict the spatial distribution of active subsidies would be useful for ecology and conservation. Previous work modelling active subsidies focused on implicit space or static distributions, which treat passive and active subsidies similarly. Active subsidies are fundamentally different from passive subsidies, because animals can respond to the process of subsidy deposition and ecosystem changes caused by subsidy deposition. We propose addressing this disparity by integrating animal movement and ecosystem ecology to advance active subsidy investigations, make more accurate predictions of subsidy spatial distributions, and enable a mechanistic understanding of subsidy spatial distributions. We review selected quantitative techniques that could be used to accomplish integration and lead to novel insights. The ultimate objective for these types of studies is predictions of subsidy spatial distributions from characteristics of the subsidy and the movement strategy employed by animals that transport subsidies. These advances will be critical in informing the management of ecosystem services, species conservation and ecosystem degradation related to active subsidies. © 2017 The Authors. Journal of Animal Ecology © 2017 British Ecological Society.

  17. An approximation method for nonlinear integral equations of Hammerstein type

    International Nuclear Information System (INIS)

    Chidume, C.E.; Moore, C.

    1989-05-01

    The solution of a nonlinear integral equation of Hammerstein type in Hilbert spaces is approximated by means of a fixed point iteration method. Explicit error estimates are given and, in some cases, convergence is shown to be at least as fast as a geometric progression. (author). 25 refs

  18. On Hardy-type integral inequalities with the gamma function.

    Science.gov (United States)

    Liao, Jianquan; Yang, Bicheng

    2017-01-01

    By means of real analysis and weight functions, we obtain a few equivalent conditions of two kinds of Hardy-type integral inequalities with the non-homogeneous kernel and parameters. The constant factors related to the gamma function are proved to be the best possible. We also consider the operator expressions and some cases of homogeneous kernel.

  19. Integrals involving functions of the type (WS)sup(q)

    International Nuclear Information System (INIS)

    Srivastava, D.K.

    1981-10-01

    Analytical expressions for integrals involving functions of the Woods-Saxon type raised to the power of q are given. These are expected to be of immediate application in optical model studies and for obtaining various moments of the potential having such shapes. (author)

  20. Aortic stiffness is associated with white matter integrity in patients with type 1 diabetes

    Energy Technology Data Exchange (ETDEWEB)

    Tjeerdema, Nathanja; Schinkel, Linda D. van [Leiden University Medical Center, Department of Endocrinology and General Internal Medicine (C7-Q), Albinusdreef 2, PO Box 9600, Leiden (Netherlands); Westenberg, Jos J.; Elderen, Saskia G. van; Buchem, Mark A. van; Grond, Jeroen van der; Roos, Albert de [Leiden University Medical Center, Department of Radiology, Leiden (Netherlands); Smit, Johannes W. [Leiden University Medical Center, Department of Endocrinology and General Internal Medicine (C7-Q), Albinusdreef 2, PO Box 9600, Leiden (Netherlands); University Medical Center Nijmegen, Department of General Internal Medicine, Nijmegen (Netherlands)

    2014-09-15

    To assess the association between aortic pulse wave velocity (PWV) as a marker of arterial stiffness and diffusion tensor imaging of brain white matter integrity in patients with type 1 diabetes using advanced magnetic resonance imaging (MRI) technology. Forty-one patients with type 1 diabetes (23 men, mean age 44 ± 12 years, mean diabetes duration 24 ± 13 years) were included. Aortic PWV was assessed using through-plane velocity-encoded MRI. Brain diffusion tensor imaging (DTI) measurements were performed on 3-T MRI. Fractional anisotropy (FA) and apparent diffusion coefficient (ADC) were calculated for white and grey matter integrity. Pearson correlation and multivariable linear regression analyses including cardiovascular risk factors as covariates were assessed. Multivariable linear regression analyses revealed that aortic PWV is independently associated with white matter integrity FA (β = -0.777, p = 0.008) in patients with type 1 diabetes. This effect was independent of age, gender, mean arterial pressure, body mass index, smoking, duration of diabetes and glycated haemoglobin levels. Aortic PWV was not significantly related to grey matter integrity. Our data suggest that aortic stiffness is independently associated with reduced white matter integrity in patients with type 1 diabetes. (orig.)

  1. Integration of rock typing methods for carbonate reservoir characterization

    International Nuclear Information System (INIS)

    Aliakbardoust, E; Rahimpour-Bonab, H

    2013-01-01

    Reservoir rock typing is the most important part of all reservoir modelling. For integrated reservoir rock typing, static and dynamic properties need to be combined, but sometimes these two are incompatible. The failure is due to the misunderstanding of the crucial parameters that control the dynamic behaviour of the reservoir rock and thus selecting inappropriate methods for defining static rock types. In this study, rock types were defined by combining the SCAL data with the rock properties, particularly rock fabric and pore types. First, air-displacing-water capillary pressure curues were classified because they are representative of fluid saturation and behaviour under capillary forces. Next the most important rock properties which control the fluid flow and saturation behaviour (rock fabric and pore types) were combined with defined classes. Corresponding petrophysical properties were also attributed to reservoir rock types and eventually, defined rock types were compared with relative permeability curves. This study focused on representing the importance of the pore system, specifically pore types in fluid saturation and entrapment in the reservoir rock. The most common tests in static rock typing, such as electrofacies analysis and porosity–permeability correlation, were carried out and the results indicate that these are not appropriate approaches for reservoir rock typing in carbonate reservoirs with a complicated pore system. (paper)

  2. Intervention types and outcomes of integrated care for diabetes mellitus type 2: a systematic review.

    Science.gov (United States)

    Busetto, Loraine; Luijkx, Katrien Ger; Elissen, Arianne Mathilda Josephus; Vrijhoef, Hubertus Johannes Maria

    2016-06-01

    The delivery of integrated care is a priority in many countries' efforts to improve health outcomes for people at risk of or with diabetes. This study aims to provide an overview of the different types of integrated care interventions for type 2 diabetes and to report their outcomes. A systematic literature search was conducted in PubMed and Cochrane for the period 2003-2013. Article selection and data extraction were performed independently by three researchers and results were discussed together. The chronic care model (CCM) was used to describe intervention types. Forty-four articles met the inclusion criteria. Most interventions included all CCM components and a variety of sub-components. Most studies reported positive patient, process and health service utilization measures. The information on costs was limited and inconsistent. The low number of articles reporting comparable outcome measures made it difficult to make meaningful statements about an association between intervention type and outcomes. Future research would benefit from a more uniform understanding of integrated care as well as intermediate outcome measurements that allow for the establishment of a chain of evidence from specific intervention types to specific outcomes achieved. It is expected that such a comprehensive approach will reveal important insights as to which integrated care intervention types and settings are most conducive to successful implementation and would thereby be of relevance to policy makers and practitioners involved in the financing, management and delivery of integrated care. © 2015 John Wiley & Sons, Ltd.

  3. Advanced computer algebra algorithms for the expansion of Feynman integrals

    Energy Technology Data Exchange (ETDEWEB)

    Ablinger, Jakob; Round, Mark; Schneider, Carsten [Johannes Kepler Univ., Linz (Austria). Research Inst. for Symbolic Computation; Bluemlein, Johannes [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany)

    2012-10-15

    Two-point Feynman parameter integrals, with at most one mass and containing local operator insertions in 4+{epsilon}-dimensional Minkowski space, can be transformed to multi-integrals or multi-sums over hyperexponential and/or hypergeometric functions depending on a discrete parameter n. Given such a specific representation, we utilize an enhanced version of the multivariate Almkvist-Zeilberger algorithm (for multi-integrals) and a common summation framework of the holonomic and difference field approach (for multi-sums) to calculate recurrence relations in n. Finally, solving the recurrence we can decide efficiently if the first coefficients of the Laurent series expansion of a given Feynman integral can be expressed in terms of indefinite nested sums and products; if yes, the all n solution is returned in compact representations, i.e., no algebraic relations exist among the occurring sums and products.

  4. A Contemporary Paradigm: Integrating Spirituality in Advance Care Planning.

    Science.gov (United States)

    Lutz, Katie; Rowniak, Stefan R; Sandhu, Prabjot

    2018-04-01

    In the 25 years since advance care planning first drew the attention of the national healthcare and legal systems, gains in the rate of advance care directive completion have been negligible despite the effort of researchers, ethicists, and lawmakers. With the benefit of sophisticated healthcare technology, patients are living longer. Despite the benefits of increased longevity, it is widely acknowledged that enough has not been done to adequately address end-of-life care decisions at the crossroads between medical futility and quality of life. To arrive at a solution, researchers have focused on patient self-reflection, provider attitudes, health literacy, communication and the logistics of surrogacy, setting, payment, and documentation. However, a survey of the literature reveals one conspicuously absent theme. It is a phenomenon one would expect in the context of end-of-life discussion and decision making, that of spiritual inquiry. This article explores the history leading up and past approaches to advance care planning and then suggests the use of a theoretical model and a body of work concerning spiritual care as a new tack in the ongoing development of advance care planning.

  5. School Integration Matters: Research-Based Strategies to Advance Equity

    Science.gov (United States)

    Frankenberg, Erica, Ed.; Garces, Liliana M., Ed.; Hopkins, Megan, Ed.

    2016-01-01

    More than 60 years after the "Brown v. Board of Education" decision declared segregated schooling inherently unequal, this timely book sheds light on how and why U.S. schools are experiencing increasing segregation along racial, socioeconomic, and linguistic lines. It offers policy and programmatic alternatives for advancing equity and…

  6. NOAA JPSS Microwave Integrated Retrieval System (MIRS) Advanced Technology Microwave Sounder (ATMS) Sounding Products from NDE

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains temperature and humidity profiles from the NOAA Microwave Integrated Retrieval System (MIRS) using sensor data from the Advanced Technology...

  7. Advanced Integrated Multi-Sensor Surveillance (AIMS. Operator Machine Interface (OMI) Definition Study

    National Research Council Canada - National Science Library

    Baker, Kevin; Youngson, Gord

    2007-01-01

    To enhance the capability of airborne search and rescue (SAR) and surveillance, particularly at night and in poor weather, a multi sensor electro optical imaging system, the Advanced Integrated Multi sensor Surveillance (AIMS...

  8. How EU Economic Integration Advances on the Way of Some Important Unions

    Directory of Open Access Journals (Sweden)

    PETRE PRISECARU

    2015-05-01

    Full Text Available Economic union and monetary union are deeply connected: two dimensions of the third stage of European integration. But achieving monetary union without a complete single market in the field of financial services proved the vulnerability of Eurozone to external shocks and the need to a further economic integration. While banking union has advanced quite fast in the last two years, capital markets union is only a project, also the fiscal union, which is the basic foundation of a true political union. A complete financial union will take a long time to accomplish due to many political, financial and bureaucratic obstacles facing such an ambitious project. Energy Union is another important project meant to remove market fragmentation, to enhance energy security and to reduce environmental impact of energy sector. Finally the political union, the last stage of European integration, the dream of many famous politicians and scholars, will be only possible on the long run as a new type of federation of nation states, provided that all components of economic union will be fully attained.

  9. Advanced Recovery and Integrated Extraction System (ARIES) program plan. Rev. 1

    International Nuclear Information System (INIS)

    Nelson, T.O.; Massey, P.W.; Cremers, T.L.

    1996-01-01

    The Advanced Recovery and Integrated Extraction System (ARIES) demonstration combines various technologies, some of which were/are being developed under previous/other Department of Energy (DOE) funded programs. ARIES is an overall processing system for the dismantlement of nuclear weapon primaries. The program will demonstrate dismantlement of nuclear weapons and retrieval of the plutonium into a form that is compatible with long term storage and that is inspectable in an unclassified form appropriate for the application of traditional international safeguards. The success of the ARIES demonstration would lead to the development of a transportable modular or other facility type systems for weapons dismantlement to be used at other DOE sites as well as in other countries

  10. Advanced Hybrid Spacesuit Concept Featuring Integrated Open Loop and Closed Loop Ventilation Systems

    Science.gov (United States)

    Daniel, Brian A.; Fitzpatrick, Garret R.; Gohmert, Dustin M.; Ybarra, Rick M.; Dub, Mark O.

    2013-01-01

    A document discusses the design and prototype of an advanced spacesuit concept that integrates the capability to function seamlessly with multiple ventilation system approaches. Traditionally, spacesuits are designed to operate both dependently and independently of a host vehicle environment control and life support system (ECLSS). Spacesuits that operate independent of vehicle-provided ECLSS services must do so with equipment selfcontained within or on the spacesuit. Suits that are dependent on vehicle-provided consumables must remain physically connected to and integrated with the vehicle to operate properly. This innovation is the design and prototype of a hybrid spacesuit approach that configures the spacesuit to seamlessly interface and integrate with either type of vehicular systems, while still maintaining the ability to function completely independent of the vehicle. An existing Advanced Crew Escape Suit (ACES) was utilized as the platform from which to develop the innovation. The ACES was retrofitted with selected components and one-off items to achieve the objective. The ventilation system concept was developed and prototyped/retrofitted to an existing ACES. Components were selected to provide suit connectors, hoses/umbilicals, internal breathing system ducting/ conduits, etc. The concept utilizes a lowpressure- drop, high-flow ventilation system that serves as a conduit from the vehicle supply into the suit, up through a neck seal, into the breathing helmet cavity, back down through the neck seal, out of the suit, and returned to the vehicle. The concept also utilizes a modified demand-based breathing system configured to function seamlessly with the low-pressure-drop closed-loop ventilation system.

  11. Two Basic Types of Business-to-Business Integration

    OpenAIRE

    Frank Goethals; Jacques Vandenbulcke; Wilfried Lemahieu; Monique Snoech; Bjorn Cumps

    2005-01-01

    In this paper we argue that there exist two basic forms of business-to-business integration (B2Bi), namely, extended enterprise integration and market B2Bi. The paper at hand clarifies the meaning of both concepts, shows that the difference between both is fundamental, and discusses the consequences of the difference in the realm of Web services development. The importance of coordination and the role of standards are studied for both types of e-business. The authors hope this paper clearly s...

  12. Advanced Integrated Multi-Sensor Surveillance (AIMS): Mission, Function, Task Analysis

    Science.gov (United States)

    2007-06-01

    DEFENCE DÉFENSE & Advanced Integrated Multi-sensor Surveillance (AIMS) Mission, Function, Task Analysis Kevin Baker and Gord Youngson CAE...Canada This page intentionally left blank. Advanced Integrated Multi-sensor Surveillance (AIMS) Mission, Function, Task Analysis Kevin Baker...les principaux opérateurs. Il est recommandé d’en tenir compte durant l’intégration du système AIMS aux projets du FWSAR et du CP-140 du PIMPA

  13. Advancing Integrated Systems Modelling Framework for Life Cycle Sustainability Assessment

    Directory of Open Access Journals (Sweden)

    Anthony Halog

    2011-02-01

    Full Text Available The need for integrated methodological framework for sustainability assessment has been widely discussed and is urgent due to increasingly complex environmental system problems. These problems have impacts on ecosystems and human well-being which represent a threat to economic performance of countries and corporations. Integrated assessment crosses issues; spans spatial and temporal scales; looks forward and backward; and incorporates multi-stakeholder inputs. This study aims to develop an integrated methodology by capitalizing the complementary strengths of different methods used by industrial ecologists and biophysical economists. The computational methodology proposed here is systems perspective, integrative, and holistic approach for sustainability assessment which attempts to link basic science and technology to policy formulation. The framework adopts life cycle thinking methods—LCA, LCC, and SLCA; stakeholders analysis supported by multi-criteria decision analysis (MCDA; and dynamic system modelling. Following Pareto principle, the critical sustainability criteria, indicators and metrics (i.e., hotspots can be identified and further modelled using system dynamics or agent based modelling and improved by data envelopment analysis (DEA and sustainability network theory (SNT. The framework is being applied to development of biofuel supply chain networks. The framework can provide new ways of integrating knowledge across the divides between social and natural sciences as well as between critical and problem-solving research.

  14. Parametric study on the glacier advancement and the integrity of a salt diapir

    International Nuclear Information System (INIS)

    Kock, Ingo

    2013-07-01

    In the present work a parameter study on the consequences for geomechanical integrity of glacier advancement above a salt diapir is presented. Different glacier thicknesses as well as speed of advancement and retreat are considered. The parameter study is conducted using a geomechanical numerical model. Results show that relevant criteria (minimum stress criterion and dilatancy criterion) may be violated during advancement of a glacier. The possibility of violating these criteria increases with increasing thickness and increasing speed.

  15. Silicon integrated circuits advances in materials and device research

    CERN Document Server

    Kahng, Dawon

    1981-01-01

    Silicon Integrated Circuits, Part B covers the special considerations needed to achieve high-power Si-integrated circuits. The book presents articles about the most important operations needed for the high-power circuitry, namely impurity diffusion and oxidation; crystal defects under thermal equilibrium in silicon and the development of high-power device physics; and associated technology. The text also describes the ever-evolving processing technology and the most promising approaches, along with the understanding of processing-related areas of physics and chemistry. Physicists, chemists, an

  16. An introduction to NASA's advanced computing program: Integrated computing systems in advanced multichip modules

    Science.gov (United States)

    Fang, Wai-Chi; Alkalai, Leon

    1996-01-01

    Recent changes within NASA's space exploration program favor the design, implementation, and operation of low cost, lightweight, small and micro spacecraft with multiple launches per year. In order to meet the future needs of these missions with regard to the use of spacecraft microelectronics, NASA's advanced flight computing (AFC) program is currently considering industrial cooperation and advanced packaging architectures. In relation to this, the AFC program is reviewed, considering the design and implementation of NASA's AFC multichip module.

  17. Systems integration and demonstration of advanced reusable structure for ALS

    Science.gov (United States)

    Gibbins, Martin N.

    1991-06-01

    The objective was to investigate the potential of advanced material to achieve life cycle cost (LCC) benefits for reusable structure on the advanced launch system. Three structural elements were investigated - all components of an Advanced Launch System reusable propulsion/avionics module. Leading aeroshell configurations included sandwich structure using titanium, graphite/polyimide (Gr/PI), or high-temperature aluminum (HTA) face sheets. Thrust structure truss concepts used titanium, graphite/epoxy, or silicon carbide/aluminum struts. Leading aft bulkhead concepts employed graphite epoxy and aluminum. The technical effort focused on the aeroshell because the greatest benefits were expected there. Thermal analyses show the structural temperature profiles during operation. Finite element analyses show stresses during splash-down. Weight statements and manufacturing cost estimates were prepared for calculation of LCC for each design. The Gr/PI aeroshell showed the lowest potential LCC, but the HTA aeroshell was judged to be lower risk. A technology development plan was prepared to validate the applicable structural technology.

  18. Advances in integrated fire management in central Mexico

    Science.gov (United States)

    Dante Arturo Rodríguez Trejo; Arturo Cruz Reyes

    2013-01-01

    This paper reports on the research and operational results of efforts made by some rural communities, the National Forestry Commission (CONAFOR), the Universidad Autónoma Chapingo (UACH) and other organizations to achieve integrated fire management in central Mexico. The research includes the latest results obtained by UACH's Ajusco Project on the subject, in both...

  19. Parameterized hilbert-type integral inequalities in the whole plane.

    Science.gov (United States)

    Huang, Qiliang; Wu, Shanhe; Yang, Bicheng

    2014-01-01

    By the use of the way of real analysis, we estimate the weight functions and give some new Hilbert-type integral inequalities in the whole plane with nonhomogeneous kernels and multiparameters. The constant factors related to the hypergeometric function and the beta function are proved to be the best possible. We also consider the equivalent forms, the reverses, and some particular cases in the homogeneous kernels.

  20. A generalized hydrodynamical Gurevich-Zybin equation of Riemann type and its Lax type integrability

    Directory of Open Access Journals (Sweden)

    M.V. Pavlov

    2010-01-01

    Full Text Available This paper is devoted to the study of a hydrodynamical equation of Riemann type, generalizing the remarkable Gurevich-Zybin system. This multi-component non-homogenous hydrodynamic equation is characterized by the only characteristic flow velocity. The compatible bi-Hamiltonian structures and Lax type representations of the 3-and 4-component generalized Riemann type hydrodynamical system are analyzed. For the first time the obtained results augment the theory of integrability of hydrodynamic type systems, originally developed only for distinct characteristic velocities in homogenous case.

  1. System design and control integration for advanced manufacturing

    CERN Document Server

    Li, Han-Xiong

    2014-01-01

    Most existing robust design books address design for static systems, or achieve robust design from experimental data via the Taguchi method. Little work considers model information for robust design particularly for the dynamic system. This book covers robust design for both static and dynamic systems using the nominal model information or the hybrid model/data information, and also integrates design with control under a large operating region. This design can handle strong nonlinearity and more uncertainties from model and parameters.

  2. Advancing medication infusion safety through the clinical integration of technology.

    Science.gov (United States)

    Gerhart, Donald; O'Shea, Kristen; Muller, Sharon

    2013-01-01

    Adverse drug events resulting from errors in prescribing or administering medications are preventable. Within a hospital system, numerous technologies are employed to address the common sources of medication error, including the use of electronic medical records, physician order entry, smart infusion pumps, and barcode medication administration systems. Infusion safety is inherently risky because of the high-risk medications administered and the lack of integration among the stand-alone systems in most institutions. Intravenous clinical integration (IVCI) is a technology that connects electronic medical records, physician order entry, smart infusion pumps, and barcode medication administration systems. It combines the safety features of an automatically programmed infusion pump (drug, concentration, infusion rate, and patient weight, all auto-programmed into the device) with software that provides visibility to real-time clinical infusion data. Our article describes the characteristics of IVCI at WellSpan Health and its impact on patient safety. The integrated infusion system has the capability of reducing medication errors, improving patient care, reducing in-facility costs, and supporting asset management. It can enhance continuous quality improvement efforts and efficiency of clinical work flow. After implementing IVCI, the institution realized a safer patient environment and a more streamlined work flow for pharmacy and nursing.

  3. Advancing population ecology with integral projection models: a practical guide

    DEFF Research Database (Denmark)

    Merow, Cory; Dahlgren, Johan; Metcall, C. Jessica E.

    2014-01-01

    Integral Projection Models (IPMs) use information on how an individual's state influences its vital rates - survival, growth and reproduction - to make population projections. IPMs are constructed from regression models predicting vital rates from state variables (e.g., size or age) and covariates...... a comprehensive guide, with extensive R code, for their construction. IPMs can be applied to any stage-structured population; here we illustrate IPMs for a series of plant life histories of increasing complexity and biological realism, highlighting the utility of various regression methods for capturing...

  4. Integrating research and advanced microscopy into the high school curriculum

    Science.gov (United States)

    Queenan, Craig; Calabro, Alyssa; Becker, David

    2012-06-01

    The Bergen County Academies (BCA) is a public magnet high school in New Jersey focused on science, technology, engineering and mathematics (STEM) education. The research program offered at the school offers students the opportunity to conduct, present and defend their own scientific research using advanced tools and techniques, including scientific equipment unavailable in most high schools, such as scanning and transmission electron microscopes. Through their journey into research, students are given a skill set that can be transferred to future education and their careers, and will help shape the next generation of leaders in the fields of science, technology, engineering and math. By serving as an educational model for reformed STEM education, BCA is at the forefront of what STEM education in the United States will look like in the years ahead.

  5. Integration of Advanced Probabilistic Analysis Techniques with Multi-Physics Models

    Energy Technology Data Exchange (ETDEWEB)

    Cetiner, Mustafa Sacit; none,; Flanagan, George F. [ORNL; Poore III, Willis P. [ORNL; Muhlheim, Michael David [ORNL

    2014-07-30

    An integrated simulation platform that couples probabilistic analysis-based tools with model-based simulation tools can provide valuable insights for reactive and proactive responses to plant operating conditions. The objective of this work is to demonstrate the benefits of a partial implementation of the Small Modular Reactor (SMR) Probabilistic Risk Assessment (PRA) Detailed Framework Specification through the coupling of advanced PRA capabilities and accurate multi-physics plant models. Coupling a probabilistic model with a multi-physics model will aid in design, operations, and safety by providing a more accurate understanding of plant behavior. This represents the first attempt at actually integrating these two types of analyses for a control system used for operations, on a faster than real-time basis. This report documents the development of the basic communication capability to exchange data with the probabilistic model using Reliability Workbench (RWB) and the multi-physics model using Dymola. The communication pathways from injecting a fault (i.e., failing a component) to the probabilistic and multi-physics models were successfully completed. This first version was tested with prototypic models represented in both RWB and Modelica. First, a simple event tree/fault tree (ET/FT) model was created to develop the software code to implement the communication capabilities between the dynamic-link library (dll) and RWB. A program, written in C#, successfully communicates faults to the probabilistic model through the dll. A systems model of the Advanced Liquid-Metal Reactor–Power Reactor Inherently Safe Module (ALMR-PRISM) design developed under another DOE project was upgraded using Dymola to include proper interfaces to allow data exchange with the control application (ConApp). A program, written in C+, successfully communicates faults to the multi-physics model. The results of the example simulation were successfully plotted.

  6. Advanced Functionally Graded Plate-Type Structures Impacted By Blast Loading

    Science.gov (United States)

    2010-08-05

    at the outer surfaces of the plate and tending toward full metal at the mid-surface UNCLASSIFIED: Dist A. Approved for public release 3. Types of FGM ...Advanced Functionally Graded Plate -Type Structures Impacted By Blast Loading Terry Hause, Ph.D. Research Mechanical Engineer U.S. Army RDECOM-TARDEC...AND SUBTITLE Advanced Functionally Graded Plate -Type Structures Impacted By Blast Loading 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  7. Global search tool for the Advanced Photon Source Integrated Relational Model of Installed Systems (IRMIS) database

    International Nuclear Information System (INIS)

    Quock, D.E.R.; Cianciarulo, M.B.

    2007-01-01

    The Integrated Relational Model of Installed Systems (IRMIS) is a relational database tool that has been implemented at the Advanced Photon Source to maintain an updated account of approximately 600 control system software applications, 400,000 process variables, and 30,000 control system hardware components. To effectively display this large amount of control system information to operators and engineers, IRMIS was initially built with nine Web-based viewers: Applications Organizing Index, IOC, PLC, Component Type, Installed Components, Network, Controls Spares, Process Variables, and Cables. However, since each viewer is designed to provide details from only one major category of the control system, the necessity for a one-stop global search tool for the entire database became apparent. The user requirements for extremely fast database search time and ease of navigation through search results led to the choice of Asynchronous JavaScript and XML (AJAX) technology in the implementation of the IRMIS global search tool. Unique features of the global search tool include a two-tier level of displayed search results, and a database data integrity validation and reporting mechanism.

  8. Integrated microfabricated biodevices. New advances in sample preparation (T2)

    International Nuclear Information System (INIS)

    Guttman, A.

    2002-01-01

    Full text: Interdisciplinary science and technologies have converged in the past few years to create exciting challenges and opportunities, which involve novel, integrated microfabricated systems, facilitating large-scale analytical applications. These new devices are referred to as lab-on-a-chip or micro Total Analysis Systems (uTAS). Their development involves both established and evolving technologies, which include microlithography, micromachining, micro-electromechanical systems (MEMS) technology, microfluidics and nanotechnology. The advent of this extremely powerful and rapid analysis technique opens up new horizons in analytical chemistry and molecular biology, capable of revealing global changes in gene expression levels by enabling genome, proteome and metabolome analysis on microchips. This presentation will provide an overview of the key device subject areas and the basic interdisciplinary technologies. It will also give a better understanding of how to utilize these miniaturized technologies as well as to provide appropriate technical solutions to problems perceived as being more fundamental. Theoretical and practical aspects of integrating sample preparation/purification and analysis units with chemical and biochemical reactors in monolithic microdevices are going to be thoroughly discussed. Important applications for this novel 'synergized' technology in high throughput analysis of biologically important molecules will also be addressed. (author)

  9. Advances in the cellular immunological pathogenesis of type 1 diabetes.

    Science.gov (United States)

    Li, Min; Song, Lu-Jun; Qin, Xin-Yu

    2014-05-01

    Type 1 diabetes is an autoimmune disease caused by the immune-mediated destruction of insulin-producing pancreatic β cells. In recent years, the incidence of type 1 diabetes continues to increase. It is supposed that genetic, environmental and immune factors participate in the damage of pancreatic β cells. Both the immune regulation and the immune response are involved in the pathogenesis of type 1 diabetes, in which cellular immunity plays a significant role. For the infiltration of CD4(+) and CD8(+) T lymphocyte, B lymphocytes, natural killer cells, dendritic cells and other immune cells take part in the damage of pancreatic β cells, which ultimately lead to type 1 diabetes. This review outlines the cellular immunological mechanism of type 1 diabetes, with a particular emphasis to T lymphocyte and natural killer cells, and provides the effective immune therapy in T1D, which is approached at three stages. However, future studies will be directed at searching for an effective, safe and long-lasting strategy to enhance the regulation of a diabetogenic immune system with limited toxicity and without global immunosuppression. © 2014 The Authors. Journal of Cellular and Molecular Medicine published by John Wiley & Sons Ltd and Foundation for Cellular and Molecular Medicine.

  10. OLED Luminaire with Panel Integrated Drivers and Advanced Controls

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Michael [Acuity Brands Lighting, Inc., Atlanta, GA (United States); Spindler, Jeff [OLEDWorks, Rochester, NY (United States)

    2017-01-31

    For this DOE award, Acuity Brands Lighting developed a novel OLED luminaire system featuring panel-integrated drivers at each individual OLED panel. The luminaire has a base station that receives user commands and performs AC/DC conversion. A power line communication (PLC) protocol is used to provide both power and digital control to each panel. A 66-panel CanvisTM luminaire using state-of-art OLED panels based on this system was successfully constructed. This is a first demonstration of such a luminaire architecture. It is also the first known implementation of this number of independently addressable nodes with a PLC protocol. This luminaire system architecture has added benefits in the flexibility of using multiple panel vendors for a given product, forward compatibility with future panels, and reduced luminaire wiring complexity and assembly time.

  11. Ceramic Integration Technologies for Advanced Energy Systems: Critical Needs, Technical Challenges, and Opportunities

    Science.gov (United States)

    Singh, Mrityunjay

    2010-01-01

    Advanced ceramic integration technologies dramatically impact the energy landscape due to wide scale application of ceramics in all aspects of alternative energy production, storage, distribution, conservation, and efficiency. Examples include fuel cells, thermoelectrics, photovoltaics, gas turbine propulsion systems, distribution and transmission systems based on superconductors, nuclear power generation and waste disposal. Ceramic integration technologies play a key role in fabrication and manufacturing of large and complex shaped parts with multifunctional properties. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various needs, challenges, and opportunities in design, fabrication, and testing of integrated similar (ceramic ceramic) and dissimilar (ceramic metal) material www.nasa.gov 45 ceramic-ceramic-systems have been discussed. Experimental results for bonding and integration of SiC based Micro-Electro-Mechanical-Systems (MEMS) LDI fuel injector and advanced ceramics and composites for gas turbine applications are presented.

  12. Recent Advances in Interval Type-2 Fuzzy Systems

    CERN Document Server

    Castillo, Oscar

    2012-01-01

    This book reviews current state of the art methods for building intelligent systems using type-2 fuzzy logic and bio-inspired optimization techniques. Combining type-2 fuzzy logic with optimization algorithms, powerful hy-brid intelligent systems have been built using the advantages that each technique offers. This book is intended to be a reference for scientists and engineers interested in applying type-2 fuzzy logic for solving problems in pattern recognition, intelligent control, intelligent manufacturing, robotics and automation. This book can also be used as a reference for graduate courses like the following: soft computing, intelligent pattern recognition, computer vision, applied artificial intelligence, and similar ones. We con-sider that this book can also be used to get novel ideas for new lines of re-search, or to continue the lines of research proposed by the authors.

  13. Integration of MOOCs in Advanced Mining Training Programmes

    Science.gov (United States)

    Saveleva, Irina; Greenwald, Oksana; Kolomiets, Svetlana; Medvedeva, Elena

    2017-11-01

    The paper covers the concept of innovative approaches in education based on incorporating MOOCs options into traditional classroom. It takes a look at the ways higher education instructors working with the mining engineers enrolled in advanced training programmes can brighten, upgrade and facilitate the learning process. The shift of higher education from in-class to online format has changed the learning environment and the methods of teaching including professional retraining courses. In addition, the need of mining companies for managers of a new kind obligates high school retraining centres rapidly move towards the 21st century skill framework. One of widely recognized innovations in the sphere of e-learning is MOOCs (Massive Open Online Courses) that can be used as an effective teaching tool for organizing professional training of managing staff of mining companies within the walls of a university. The authors share their instructional experience and show the benefits of introducing MOOCs options at the courses designed for retraining mining engineers and senior managers of coal enterprises. Though in recent researches the pedagogical value of MOOCs is highly questioned and even negated this invention of the 21st century can become an essential and truly helpful instrument in the hands of educators.

  14. Status of development - An integral type small reactor MRX in JAERI

    International Nuclear Information System (INIS)

    Hoschi, T.; Ochiai, M.; Shimazaki, J.

    1998-01-01

    JAERI is conducting a design study on an integral type small reactor MRX for the use of nuclear ships. The basic concept of the reactor system is the integral type reactor with in-vessel steam generators and control rod drive systems, however, such new technologies as the water-filled containment, the passive decay heat removal system, the advanced automatic system, etc., are adopted to satisfy the essential requirements for the next generation ship reactors, i.e. compact, light, highly safe and easy operation. Research and development (R and D) works have being progressed on the peculiar components, the advanced automatic operation systems and the safety systems. Feasibility study and the economical evaluation of nuclear merchant ships have also being performed. The experiments and analysis of the safety carried out so far are proving that the passive safety features applied into the MRX are sufficient functions in the safety point of view. The MRX is a typical small type reactor realizing the easy operation by simplifying the reactor systems adopting the passive safety systems, therefore, it has wide variety of use as energy supply systems. This paper summarizes the present status on the design study of the MRX and the research and development activities as well as the some results of feasibility study. (author)

  15. Development of an advanced 16x165 Westinghouse type PWR fuel assembly for Slovenia

    International Nuclear Information System (INIS)

    Boone, M. L.; King, S. J.; Pulver, E. F.; Jeon, K.-L.; Esteves, R.; Kurincic, B.

    2004-01-01

    Industrias Nucleares do Brasil (INB), KEPCO Nuclear Fuel Company, Ltd. (KNFC), and Westinghouse Electric Company (Westinghouse) have jointly designed an advanced 16x16 Westinghouse type PWR fuel assembly. This advanced 16x16 Westinghouse type PWR fuel assembly, which will be implemented in both Kori Unit 2 (in Korea) and Angra Unit 1 (in Brazil) in January and March 2005, respectively, is an integral part of the utilities fuel management strategy. This same fuel design has also been developed for future use in Krsko Unit 1 (in Slovenia). In this paper we will describe the front-end nuclear fuel management activities utilized by the joint development team and describe how these activities played an integral part in defining the direction of the advanced 16x16 Westinghouse type PWR fuel assembly design. Additionally, this paper will describe how this design demonstrates improved margins under high duty plant operating conditions. The major reason for initiating this joint development program was to update the current 16x16 fuel assembly, which is also called 16STD. The current 16STD fuel assembly contains a non-optimized fuel rod diameter for the fuel rod pitch (i.e. 9.5 mm OD fuel rods at a 0.485 inch pitch), non-neutronic efficient components (i.e. Inconel Mid grids), no Intermediate Flow Mixer (IFM) grids, and other mechanical features. The advanced 16x16 fuel assembly is being designed for peak rod average burnups of up to 75 MWd/kgU and will use an optimized fuel rod diameter (i.e. 9.14 mm OD ZIRLO TM fuel rods), neutronic efficient components (i.e. ZIRLO TM Mid grids), ZIRLO TM Intermediate Flow Mixer (IFM) grids to improve Departure from Nucleate Boiling (DNB) margin, and many other mechanical features that improve design margins. Nuclear design activities in the areas of fuel cycle cost and fuel management were performed in parallel to the fuel assembly design efforts. As the change in reactivity due to the change in the fuel rod diameter influences directly

  16. Star product and invariant integration for Lie Type noncommutative spacetimes

    International Nuclear Information System (INIS)

    Chryssomalakos, Chryssomalis; Okon, Elias

    2007-01-01

    We present a star product for noncommutative spaces of Lie type, including the so called 'canonical' case by introducing a central generator, which is compatible with translations and admits a simple, manageable definition of an invariant integral. A quasi-cyclicity property for the latter is shown to hold, which reduces to exact cyclicity when the adjoint representation of the underlying Lie algebra is traceless. Several explicit examples illuminate the formalism, dealing with κ-Minkowski spacetime and the Heisenberg algebra ('canonical' noncommutative 2-plane)

  17. Integrative Chemistry: Advanced functional cellular materials bearing multiscale porosity

    Science.gov (United States)

    Depardieu, M.; Kinadjian, N.; Backov, R.

    2015-07-01

    With this mini review we show through the sol-gel and emulsion-based Integrative Chemistry how it is possible to trigger materials dimensionality and beyond their functionalities when reaching enhanced applications. In here we focus on 3D macrocellular monolithic foams bearing hierarchical porosities and applications thereof. We first depict the general background of emulsions focusing on concentrated ones, acting as soft templates for the design of PolyHIPE foams, HIPE being the acronym of High Internal Phase Emulsions while encompassing both sol-gel and polymer chemistry. Secondly we extend this approach toward the design of hybrid organic-inorganic foams, labeled Organo-Si(HIPE), where photonics and heterogeneous catalysis applications are addressed. In a third section we show how inorganic Si(HIPE) matrices can be employed as sacrificial hard templates for the generation carbonaceous foams, labeled Carbon(HIPE). These foams being conductive we show applications when employed as electrodes for Li-S battery and as hosts for Li(BH4)-based hydrogen storage.

  18. Developing integrated crop knowledge networks to advance candidate gene discovery.

    Science.gov (United States)

    Hassani-Pak, Keywan; Castellote, Martin; Esch, Maria; Hindle, Matthew; Lysenko, Artem; Taubert, Jan; Rawlings, Christopher

    2016-12-01

    The chances of raising crop productivity to enhance global food security would be greatly improved if we had a complete understanding of all the biological mechanisms that underpinned traits such as crop yield, disease resistance or nutrient and water use efficiency. With more crop genomes emerging all the time, we are nearer having the basic information, at the gene-level, to begin assembling crop gene catalogues and using data from other plant species to understand how the genes function and how their interactions govern crop development and physiology. Unfortunately, the task of creating such a complete knowledge base of gene functions, interaction networks and trait biology is technically challenging because the relevant data are dispersed in myriad databases in a variety of data formats with variable quality and coverage. In this paper we present a general approach for building genome-scale knowledge networks that provide a unified representation of heterogeneous but interconnected datasets to enable effective knowledge mining and gene discovery. We describe the datasets and outline the methods, workflows and tools that we have developed for creating and visualising these networks for the major crop species, wheat and barley. We present the global characteristics of such knowledge networks and with an example linking a seed size phenotype to a barley WRKY transcription factor orthologous to TTG2 from Arabidopsis, we illustrate the value of integrated data in biological knowledge discovery. The software we have developed (www.ondex.org) and the knowledge resources (http://knetminer.rothamsted.ac.uk) we have created are all open-source and provide a first step towards systematic and evidence-based gene discovery in order to facilitate crop improvement.

  19. Advanced Integrated Multi-sensor Surveillance (AIMS). Mission, Function, Task Analysis

    Science.gov (United States)

    2007-06-01

    Defence R&D Canada – Atlantic DEFENCE DÉFENSE & Advanced Integrated Multi-sensor Surveillance (AIMS) Mission, Function, Task Analysis Kevin Baker and...sensor Surveillance (AIMS) Mission, Function, Task Analysis Kevin Baker Gord Youngson CAE Professional Services CAE Professional Services 1135...d’en tenir compte durant l’intégration du système AIMS aux projets du FWSAR et du CP-140 du PIMPA. Baker, K. and Youngson, G. 2007. Advanced

  20. Education and Advance Care Planning in Nursing Homes: The Impact of Ownership Type.

    Science.gov (United States)

    Walker, Leslie C.; Bradley, Elizabeth H.

    1998-01-01

    A study of 25 nonprofit and 87 for-profit nursing homes showed both types likely to offer education on advance care planning. However, nonprofits were more likely to have ongoing discussions that covered more than life support decisions and to have ethics committees to support advance care planning. (SK)

  1. Episodes of breathlessness: types and patterns: a qualitative study exploring experiences of patients with advanced diseases

    NARCIS (Netherlands)

    Simon, S.T.; Higginson, I.J.; Benalia, H.; Gysels, M.; Murtagh, F.E.M.; Spicer, J.; Bausewein, C.

    2013-01-01

    Background: Despite the high prevalence and impact of episodic breathlessness, information about characteristics and patterns is scarce. Aim: To explore the experience of patients with advanced disease suffering from episodic breathlessness, in order to describe types and patterns. Design and

  2. Sustaining high energy efficiency in existing processes with advanced process integration technology

    International Nuclear Information System (INIS)

    Zhang, Nan; Smith, Robin; Bulatov, Igor; Klemeš, Jiří Jaromír

    2013-01-01

    Highlights: ► Process integration with better modelling and more advanced solution methods. ► Operational changes for better environmental performance through optimisation. ► Identification of process integration technology for operational optimisation. ► Systematic implementation procedure of process integration technology. ► A case study with crude oil distillation to demonstrate the operational flexibility. -- Abstract: To reduce emissions in the process industry, much emphasis has been put on making step changes in emission reduction, by developing new process technology and making renewable energy more affordable. However, the energy saving potential of existing systems cannot be simply ignored. In recent years, there have been significant advances in process integration technology with better modelling techniques and more advanced solution methods. These methods have been applied to the new design and retrofit studies in the process industry. Here attempts are made to apply these technologies to improve the environmental performance of existing facilities with operational changes. An industrial project was carried out to demonstrate the importance and effectiveness of exploiting the operational flexibility for energy conservation. By applying advanced optimisation technique to integrate the operation of distillation and heat recovery in a crude oil distillation unit, the energy consumption was reduced by 8% without capital expenditure. It shows that with correctly identified technology and the proper execution procedure, significant energy savings and emission reduction can be achieved very quickly without major capital expenditure. This allows the industry to improve its economic and environment performance at the same time.

  3. Integral type small PWR with stand-alone safety

    International Nuclear Information System (INIS)

    Makihara, Yoshiaki

    2001-01-01

    A feasibility study is achieved on an integral type small PWR with stand-alone safety. It is designed to have the following features. (1) The coolant does not leak out at any accidental condition. (2) The fuel failure does never occur while it is supposed on the large scale PWR at the design base accident. (3) At any accidental condition the safety is secured without any support from the outside (stand-alone safety secure). (4) It has self-regulating characteristics and easy controllability. The above features can be satisfied by integrate the steam generator and CRDM in the reactor vessel while the pipe line break has to be considered on the conventional PWR. Several counter measures are planned to satisfy the above features. The economy feature is also attained by several simplifications such as (1) elimination of main coolant piping and pressurizer by the integration of primary cooling system and self-pressurizing, (2) elimination of RCP by application of natural circulating system, (3) elimination of ECCS and accumulator by application of static safety system, (4) large scale volume reduction of the container vessel by application of integrated primary cooling system, (5) elimination of boric acid treatment by deletion of chemical shim. The long operation period such as 10 years can be attained by the application of Gd fuel in one batch refueling. The construction period can be shortened by the standardizing the design and the introduction of modular component system. Furthermore the applicability of the reduced modulation core is also considered. (K. Tsuchihashi)

  4. A new type of GC-MS with advanced capabilities

    Science.gov (United States)

    Fialkov, Alexander B.; Steiner, Urs; Jones, Larry; Amirav, Aviv

    2006-03-01

    We have combined the benefits of supersonic molecular beam interface and its related fly-through electron ionization (EI) ion source with the advanced features of the Varian 1200L gas chromatography-mass spectrometry (GC-MS) and mass spectrometry-mass spectrometry (MS-MS), resulting in a new and powerful GC-MS platform with record setting performance. Electron ionization of vibrationally cold molecules in the supersonic molecular beams (SMB) (cold EI) provided mass spectra with enhanced molecular ion, yet with good library search results and superior identification probabilities. We found that high GC column flow rates lower the elution temperature for any given compounds. This allows much larger molecules to elute at the maximum temperature of standard columns. We analyzed a mixture of heavy linear chain hydrocarbons all the way to C84H170 with a molecular weight of 1179.3 amu, using a 4 m 0.25 mm i.d. column and 32 ml/min He flow rate. Furthermore, we obtained a dominant molecular ion to all these compounds. The lower elution temperatures also greatly enhance the ability to analyze very thermally labile compounds such as carbamate pesticides. The experimental 1200 system is capable of triple quadrupole based MS-MS. We found that MS-MS on the molecular ion is much more effective than on fragment ions, and thus, the enhancement of the molecular ion directly improves the MS-MS sensitivity. Fast GC-MS analysis was also explored, based on very high column flow rate for fast splitless injections without affecting the sensitivity, and on the high system selectivity due to the combination of enhanced molecular ion and MS-MS. We demonstrate a few seconds long GC-MS-MS analysis of diazinon, spiked at 10 ng/g in a mixed fruit and vegetable extract. The feature of enhanced molecular ion provides significant enhancement in the detection sensitivity via SIM and RSIM on the molecular ion. While octafluoronaphthalene (OFN) detection limit of below 1 fg in SIM mode is shown, the

  5. Design of integral shutters for the beamlines at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Chang, J.; Shu, D.; Nian, H.L.; Kuzay, T.M.; Job, P.K.

    1994-01-01

    An integral shutter is a device that integrates a white-beam stop, monochromatic-beam (mono-beam) shutters, a safety stop, and a collimator into one assembly to save space in the photon beamline. Various integral shutters have been developed as standard components for the beamlines at the Advanced Photon Source. The integral shutters are designed to be operated in white-beam mode or mono-beam mode. With regard to safety, each mode of operation is secured by locking certain devices in their up or down positions. Some of the components of the integral shutters share designs similar to the front-end shutters or fixed masks. Design details of the integral shutters are presented

  6. Systems Engineering and Integration for Advanced Life Support System and HST

    Science.gov (United States)

    Kamarani, Ali K.

    2005-01-01

    Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.

  7. Integrated Genomic Analysis of the Ubiquitin Pathway across Cancer Types

    Directory of Open Access Journals (Sweden)

    Zhongqi Ge

    2018-04-01

    Full Text Available Summary: Protein ubiquitination is a dynamic and reversible process of adding single ubiquitin molecules or various ubiquitin chains to target proteins. Here, using multidimensional omic data of 9,125 tumor samples across 33 cancer types from The Cancer Genome Atlas, we perform comprehensive molecular characterization of 929 ubiquitin-related genes and 95 deubiquitinase genes. Among them, we systematically identify top somatic driver candidates, including mutated FBXW7 with cancer-type-specific patterns and amplified MDM2 showing a mutually exclusive pattern with BRAF mutations. Ubiquitin pathway genes tend to be upregulated in cancer mediated by diverse mechanisms. By integrating pan-cancer multiomic data, we identify a group of tumor samples that exhibit worse prognosis. These samples are consistently associated with the upregulation of cell-cycle and DNA repair pathways, characterized by mutated TP53, MYC/TERT amplification, and APC/PTEN deletion. Our analysis highlights the importance of the ubiquitin pathway in cancer development and lays a foundation for developing relevant therapeutic strategies. : Ge et al. analyze a cohort of 9,125 TCGA samples across 33 cancer types to provide a comprehensive characterization of the ubiquitin pathway. They detect somatic driver candidates in the ubiquitin pathway and identify a cluster of patients with poor survival, highlighting the importance of this pathway in cancer development. Keywords: ubiquitin pathway, pan-cancer analysis, The Cancer Genome Atlas, tumor subtype, cancer prognosis, therapeutic targets, biomarker, FBXW7

  8. Characterization of an Integral Thermal Protection and Cryogenic Insulation Material for Advanced Space Transportation Vehicles

    Science.gov (United States)

    Salerno, L. J.; White, S. M.; Helvensteijn, B. P. M.

    2000-01-01

    NASA's planned advanced space transportation vehicles will benefit from the use of integral/conformal cryogenic propellant tanks which will reduce the launch weight and lower the earth-to-orbit costs considerably. To implement the novel concept of integral/conformal tanks requires developing an equally novel concept in thermal protection materials. Providing insulation against reentry heating and preserving propellant mass can no longer be considered separate problems to be handled by separate materials. A new family of materials, Superthermal Insulation (STI), has been conceiving and investigated by NASA's Ames Research Center to simultaneously provide both thermal protection and cryogenic insulation in a single, integral material.

  9. Using the Student Research Project to Integrate Macroeconomics and Statistics in an Advanced Cost Accounting Course

    Science.gov (United States)

    Hassan, Mahamood M.; Schwartz, Bill N.

    2014-01-01

    This paper discusses a student research project that is part of an advanced cost accounting class. The project emphasizes active learning, integrates cost accounting with macroeconomics and statistics by "learning by doing" using real world data. Students analyze sales data for a publicly listed company by focusing on the company's…

  10. Methods and tools for the evaluation of the sensitivity to natural radiations of advanced integrated circuits

    International Nuclear Information System (INIS)

    Peronnard, P.

    2009-10-01

    Atmospheric neutrons, whose fluxes and energies dependent on the altitude, the sun activity and the geographic coordinates, have been identified as being capable to provoke SEE (Single Event Effects), by indirect ionisation, in integrated devices issued from advanced manufacturing processes (nano-metric devices). This concerns not only avionics but also applications operating at ground level. The evaluation of the sensitivity to SEE provoked by natural radiation becomes thus a mandatory step during the selection of devices devoted to be included in applications requiring high reliability. The sensitivity to SEE can be mitigated by different approaches at different levels from manufacturing level (use of particular process technologies such as SOI - Silicon On Isolator -) to the system level (hardware/software redundancy). Independently of the adopted hardening approach, the so-called radiation ground testing are mandatory to evaluate the error rates of a device or a system. During such tests, the DUT (Device Under Test) is exposed to a flux of particles while it performs a given activity. For SEU (Single Event Upsets) radiation ground testing, two main strategies exist: static test: the circuit areas which are supposed to be sensitive to SEUs (registers, memories,...) are initialized with a reference pattern. The content of the sensitive area is periodically compared to the reference pattern to identify potential SEU. Dynamic test: the DUT performs an activity representative of the one it will execute during the final application. Static test: strategies are frequently adopted as they provide the intrinsic sensitivity, in terms of the average number of particles needed to provoke an SEU, of different sensitive areas of the device. From such a strategy can thus be obtained a 'worst case estimation' of the device sensitivity. This thesis aims at giving a description and validating the methodologies required to estimate the sensitivity to radiations of two types of

  11. A severe accident analysis for the system-integrated modular advanced reactor

    International Nuclear Information System (INIS)

    Jung, Gunhyo; Jae, Moosung

    2015-01-01

    The System-Integrated Modular Advanced Reactor (SMART) that has been recently designed in KOREA and has acquired standard design certification from the nuclear power regulatory body (NSSC) is an integral type reactor with 330MW thermal power. It is a small sized reactor in which the core, steam generator, pressurizer, and reactor coolant pump that are in existing pressurized light water reactors are designed to be within a pressure vessel without any separate pipe connection. In addition, this reactor has much different design characteristics from existing pressurized light water reactors such as the adoption of a passive residual heat removal system and a cavity flooding system. Therefore, the safety of the SMART against severe accidents should be checked through severe accident analysis reflecting the design characteristics of the SMART. For severe accident analysis, an analysis model has been developed reflecting the design information presented in the standard design safety analysis report. The severe accident analysis model has been developed using the MELCOR code that is widely used to evaluate pressurized LWR severe accidents. The steady state accident analysis model for the SMART has been simulated. According to the analysis results, the developed model reflecting the design of the SMART is found to be appropriate. Severe accident analysis has been performed for the representative accident scenarios that lead to core damage to check the appropriateness of the severe accident management plan for the SMART. The SMART has been shown to be safe enough to prevent severe accidents by utilizing severe accident management systems such as a containment spray system, a passive hydrogen recombiner, and a cavity flooding system. In addition, the SMART is judged to have been technically improved remarkably compared to existing PWRs. The SMART has been designed to have a larger reactor coolant inventory compared to its core's thermal power, a large surface area in

  12. Kwong-Wong-type integral equation on time scales

    Directory of Open Access Journals (Sweden)

    Baoguo Jia

    2011-09-01

    Full Text Available Consider the second-order nonlinear dynamic equation $$ [r(tx^Delta(ho(t]^Delta+p(tf(x(t=0, $$ where $p(t$ is the backward jump operator. We obtain a Kwong-Wong-type integral equation, that is: If $x(t$ is a nonoscillatory solution of the above equation on $[T_0,infty$, then the integral equation $$ frac{r^sigma(tx^Delta(t}{f(x^sigma(t} =P^sigma(t+int^infty_{sigma(t}frac{r^sigma(s [int^1_0f'(x_h(sdh][x^Delta(s]^2}{f(x(s f(x^sigma(s}Delta s $$ is satisfied for $tgeq T_0$, where $P^sigma(t=int^infty_{sigma(t}p(sDelta s$, and $x_h(s=x(s+hmu(sx^Delta(s$. As an application, we show that the superlinear dynamic equation $$ [r(tx^{Delta}(ho(t]^Delta+p(tf(x(t=0, $$ is oscillatory, under certain conditions.

  13. Truncation of the Series Expressions in the Advanced ENZ-Theory of Diffraction Integrals

    Science.gov (United States)

    van Haver, S.; Janssen, A. J. E. M.

    2014-09-01

    . The contribution of the present paper is the formulation of truncation rules for these double series expressions, with a general rule valid for all circle polynomials at the same time, and a dedicated rule that takes into account the degree and the azimuthal order of the involved circle polynomials to significantly reduce computational cost in specific cases. The truncation rules are based on effective bounds and asymptotics (of the Debye type) for the mentioned spherical Bessel functions and Jinc functions, and show feasibility of computation of practically all diffraction integrals that one encounters in the ENZ-practice. Thus it can be said that the advanced ENZ-theory is more or less completed from the computational point of view by the achievements of the present paper.

  14. PERFORMANCE STUDIES OF INTEGRATED FUZZY LOGIC CONTROLLER FOR BRUSHLESS DC MOTOR DRIVES USING ADVANCED SIMULATION MODEL

    Directory of Open Access Journals (Sweden)

    C. Subba Rami Reddy

    2011-07-01

    Full Text Available This paper introduces an Integrated fuzzy logic controller (IFLC for brushless dc (BLDC motor drives using advanced simulation model and presents a comparative study of performances of PID controller and IFLC. The dynamic characteristics of speed and torque are effectively monitored and analyzed using the proposed model. The aim of IFLC is to obtain improved performance in terms of disturbance rejection or parameter variation than obtained using PID controller. The IFLC is constructed by using Fuzzy logic controller (FLC and PID controller. A performance comparison of the controllers is also given based on the integral of the absolute value of the error (IAE, the integral of the squared error (ISE, the integral of the time-weighted absolute error (ITAE and the integral of the time-weighted squared error (ITSE. The results show the effectiveness of the proposed controller.

  15. Sahoo- and Wayment-Type Integral Mean Value Theorems

    Science.gov (United States)

    Tiryaki, Aydin; Cakmak, Devrim

    2010-01-01

    In this article, by using Rolle's theorem, we establish some results related to the mean value theorem for integrals. Our results are different from the set of integral mean value theorems which are given by Wayment ["An integral mean value theorem", Math. Gazette 54 (1970), pp. 300-301] and Sahoo ["Some results related to the integral mean value…

  16. Advancements in Wind Integration Study Data Modeling: The Wind Integration National Dataset (WIND) Toolkit; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Draxl, C.; Hodge, B. M.; Orwig, K.; Jones, W.; Searight, K.; Getman, D.; Harrold, S.; McCaa, J.; Cline, J.; Clark, C.

    2013-10-01

    Regional wind integration studies in the United States require detailed wind power output data at many locations to perform simulations of how the power system will operate under high-penetration scenarios. The wind data sets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as be time synchronized with available load profiles. The Wind Integration National Dataset (WIND) Toolkit described in this paper fulfills these requirements. A wind resource dataset, wind power production time series, and simulated forecasts from a numerical weather prediction model run on a nationwide 2-km grid at 5-min resolution will be made publicly available for more than 110,000 onshore and offshore wind power production sites.

  17. Advanced, Integrated Control for Building Operations to Achieve 40% Energy Saving

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Yan; Song, Zhen; Loftness, Vivian; Ji, Kun; Zheng, Sam; Lasternas, Bertrand; Marion, Flore; Yuebin, Yu

    2012-10-15

    We developed and demonstrated a software based integrated advanced building control platform called Smart Energy Box (SEB), which can coordinate building subsystem controls, integrate variety of energy optimization algorithms and provide proactive and collaborative energy management and control for building operations using weather and occupancy information. The integrated control system is a low cost solution and also features: Scalable component based architecture allows to build a solution for different building control system configurations with needed components; Open Architecture with a central data repository for data exchange among runtime components; Extendible to accommodate variety of communication protocols. Optimal building control for central loads, distributed loads and onsite energy resource; uses web server as a loosely coupled way to engage both building operators and building occupants in collaboration for energy conservation. Based on the open platform of SEB, we have investigated and evaluated a variety of operation and energy saving control strategies on Carnegie Mellon University Intelligent Work place which is equipped with alternative cooling/heating/ventilation/lighting methods, including radiant mullions, radiant cooling/heating ceiling panels, cool waves, dedicated ventilation unit, motorized window and blinds, and external louvers. Based on the validation results of these control strategies, they were integrated in SEB in a collaborative and dynamic way. This advanced control system was programmed and computer tested with a model of the Intelligent Workplace's northern section (IWn). The advanced control program was then installed in the IWn control system; the performance was measured and compared with that of the state of the art control system to verify the overall energy savings great than 40%. In addition advanced human machine interfaces (HMI's) were developed to communicate both with building

  18. Science based integrated approach to advanced nuclear fuel development - vision, approach, and overview

    Energy Technology Data Exchange (ETDEWEB)

    Unal, Cetin [Los Alamos National Laboratory; Pasamehmetoglu, Kemal [IDAHO NATIONAL LAB; Carmack, Jon [IDAHO NATIONAL LAB

    2010-01-01

    Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Rcactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems is critical. In order to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. The purpose of this paper is to identify the modeling and simulation approach in order to deliver predictive tools for advanced fuels development. The coordination between experimental nuclear fuel design, development technical experts, and computational fuel modeling and simulation technical experts is a critical aspect of the approach and naturally leads to an integrated, goal-oriented science-based R & D approach and strengthens both the experimental and computational efforts. The Advanced Fuels Campaign (AFC) and Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Integrated Performance and Safety Code (IPSC) are working together to determine experimental data and modeling needs. The primary objective of the NEAMS fuels IPSC project is to deliver a coupled, three-dimensional, predictive computational platform for modeling the fabrication and both normal and abnormal operation of nuclear fuel pins and assemblies, applicable to both existing and future reactor fuel designs. The science based program is pursuing the development of an integrated multi-scale and multi-physics modeling and simulation platform for nuclear fuels. This overview paper discusses the vision, goals and approaches how to develop and implement the new approach.

  19. Integral design concepts of advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-11-01

    Under the sub-programme on non-electrical applications of advanced reactors, the International Atomic Energy Agency has been providing a worldwide forum for exchange of information on integral reactor concepts. Two Technical Committee meetings were held in 1994 and 1995 on the subject where state-of-the-art developments were presented. Efforts are continuing for the development of advanced nuclear reactors of both evolutionary and innovative design, for electricity, co-generation and heat applications. While single purpose reactors for electricity generation may require small and medium sizes under certain conditions, reactors for heat applications and co-generation would be necessary in the small and medium range and need to be located closer to the load centres. The integral design approach to the development of advanced light water reactors has received special attention over the past few years. Several designs are in the detailed design stage, some are under construction, one prototype is in operation. A need has been felt for guidance on a number of issues, ranging from design objectives to the assessment methodology needed to show how integral designs can meet these objectives, and also to identify their advantages and problem areas. The technical document addresses the current status of the design, safety and operational issues of integral reactors and recommends areas for future development

  20. On new inequalities of Hermite-Hadamard-Fejer type for harmonically convex functions via fractional integrals.

    Science.gov (United States)

    Kunt, Mehmet; İşcan, İmdat; Yazıcı, Nazlı; Gözütok, Uğur

    2016-01-01

    In this paper, firstly, new Hermite-Hadamard type inequalities for harmonically convex functions in fractional integral forms are given. Secondly, Hermite-Hadamard-Fejer inequalities for harmonically convex functions in fractional integral forms are built. Finally, an integral identity and some Hermite-Hadamard-Fejer type integral inequalities for harmonically convex functions in fractional integral forms are obtained. Some results presented here provide extensions of others given in earlier works.

  1. Advanced fighter technology integration (AFTI)/F-16 Automated Maneuvering Attack System final flight test results

    Science.gov (United States)

    Dowden, Donald J.; Bessette, Denis E.

    1987-01-01

    The AFTI F-16 Automated Maneuvering Attack System has undergone developmental and demonstration flight testing over a total of 347.3 flying hours in 237 sorties. The emphasis of this phase of the flight test program was on the development of automated guidance and control systems for air-to-air and air-to-ground weapons delivery, using a digital flight control system, dual avionics multiplex buses, an advanced FLIR sensor with laser ranger, integrated flight/fire-control software, advanced cockpit display and controls, and modified core Multinational Stage Improvement Program avionics.

  2. On a Nonlocal Ostrovsky-Whitham Type Dynamical System, Its Riemann Type Inhomogeneous Regularizations and Their Integrability

    Directory of Open Access Journals (Sweden)

    Jolanta Golenia

    2010-01-01

    Full Text Available Short-wave perturbations in a relaxing medium, governed by a special reduction of the Ostrovsky evolution equation, and later derived by Whitham, are studied using the gradient-holonomic integrability algorithm. The bi-Hamiltonicity and complete integrability of the corresponding dynamical system is stated and an infinite hierarchy of commuting to each other conservation laws of dispersive type are found. The well defined regularization of the model is constructed and its Lax type integrability is discussed. A generalized hydrodynamical Riemann type system is considered, infinite hierarchies of conservation laws, related compatible Poisson structures and a Lax type representation for the special case N=3 are constructed.

  3. New type integral inequalities for convex functions with applications II

    OpenAIRE

    Mehrez, Khaled; Agarwal, Praveen

    2017-01-01

    We have recently established some integral inequalities for convex functions via the Hermite-Hadamard's inequalities. In continuation here, we also establish some interesting new integral inequalities for convex functions via the Hermite--Hadamard's inequalities and Jensen's integral inequality. Useful applications involving special means are also included.

  4. PH5 for integrating and archiving different data types

    Science.gov (United States)

    Azevedo, Steve; Hess, Derick; Beaudoin, Bruce

    2016-04-01

    areas one of which is using PH5 to handle very large data sets. PH5 is also good at integrating data from various types of seismic experiments such as OBS, onshore-offshore, controlled source, and passive recording. HDF5 is capable of holding practically any type of digital data so integrating GPS data with seismic data is possible. Since PH5 is a common format and data contained in HDF5 is accessible randomly it has been easy to extend to include new input and output data formats as community needs arise.

  5. Shaped e-beam lithography integration work for advanced ASIC manufacturing: progress report

    Science.gov (United States)

    Pain, Laurent; Charpin, Murielle; LaPlanche, Yves; Henry, Daniel

    2002-07-01

    For the sub-90 nm node integrated circuits design rules, ITRS forecasts require minimal gate line width down to 55-35 nm. To reach such aggressive targets, most advanced optical lithography tools combined with all reticle enhancement techniques will be requested inducing important manufacturing cost and mask cycle time increase. In order to address prototyping market and reduce fabrication cost, shaped electron beam lithography may represent a technological alternative for cost reduction due to its high resolution and potential throughput capabilities. This paper is focused on the integration of this technology in standard ASIC plant, including resist process and overlay capabilities.

  6. Nanocarrier-Integrated Microspheres: Nanogel Tectonic Engineering for Advanced Drug-Delivery Systems.

    Science.gov (United States)

    Tahara, Yoshiro; Mukai, Sada-Atsu; Sawada, Shin-Ichi; Sasaki, Yoshihiro; Akiyoshi, Kazunari

    2015-09-09

    A nanocarrier-integrated bottom-up method is a promising strategy for advanced drug-release systems. Self-assembled nanogels, which are one of the most beneficial nanocarriers for drug-delivery systems, are tectonically integrated to prepare nanogel-crosslinked (NanoClik) microspheres. NanoClik microspheres consisting of nanogel-derived structures (observed by STED microscopy) release "drug-loaded nanogels" after hydrolysis, resulting in successful sustained drug delivery in vivo. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. An integrated approach to selecting materials for fuel cladding in advanced high-temperature reactors

    Energy Technology Data Exchange (ETDEWEB)

    Rangacharyulu, C., E-mail: chary.r@usask.ca [Univ. of Saskatchewan, Saskatoon, SK (Canada); Guzonas, D.A.; Pencer, J.; Nava-Dominguez, A.; Leung, L.K.H. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    2014-07-01

    An integrated approach has been developed for selection of fuel cladding materials for advanced high-temperature reactors. Reactor physics, thermalhydraulic and material analyses are being integrated in a systematic study comparing various candidate fuel-cladding alloys. The analyses established the axial and radial neutron fluxes, power distributions, axial and radial temperature distributions, rates of defect formation and helium production using AECL analytical toolsets and experimentally measured corrosion rates to optimize the material composition for fuel cladding. The project has just been initiated at University of Saskatchewan. Some preliminary results of the analyses are presented together with the path forward for the project. (author)

  8. Certain Hermite-Hadamard type inequalities via generalizedk-fractional integrals.

    Science.gov (United States)

    Agarwal, Praveen; Jleli, Mohamed; Tomar, Muharrem

    2017-01-01

    Some Hermite-Hadamard type inequalities for generalized k -fractional integrals (which are also named [Formula: see text]-Riemann-Liouville fractional integrals) are obtained for a fractional integral, and an important identity is established. Also, by using the obtained identity, we get a Hermite-Hadamard type inequality.

  9. IEDA Thesaurus: A Controlled Vocabulary for IEDA Systems to Advance Integration

    Science.gov (United States)

    Ji, P.; Lehnert, K. A.; Arko, R. A.; Song, L.; Hsu, L.; Carter, M. R.; Ferrini, V. L.; Ash, J.

    2014-12-01

    Integrated Earth Data Applications (IEDA) is a community-based facility that serves to support, sustain, and advance the geosciences by providing data services for observational geoscience data from the Ocean, Earth, and Polar Sciences. Many dedicated systems such as the Petrological Database (PetDB), Marine Geoscience Data System (MGDS), System for Earth Sample Registration (SESAR), Data Coordination Center for the U.S. Antarctic Program (USAP-DCC), etc., under the umbrella of the IEDA framework, were developed to support the preservation, discovery, retrieval, and analysis of a wide range of observational field and analytical data types from diverse communities. However, it is currently difficult to maintain consistency of indexing content within IEDA schema, and perform unified or precise searching of the data in these diverse systems as each system maintains separate vocabularies, hierarchies, authority files, or sub taxonomies. We present here the IEDA Thesaurus, a system, which combines existing separate controlled vocabularies from the different systems under the IEDA schema into a single master controlled vocabulary, also introducing some new top facets for future long-term use. The IEDA thesaurus contains structured terminology for petrology, geochemistry, sedimentology, oceanography, geochronology, and volcanology, and other general metadata fields. 18 top facets (also called 'top categories') are defined, including equipment, geographic gazetteer, geologic ages, geologic units, materials, etc. The terms of the thesaurus are cross validated with others popular geoscience vocabularies such as GeoRef Thesaurus, U.S. Geological Survey Library Classification System, Global Change Master Directory (GCMD), and Semantic Web for Earth and Environmental Terminology (SWEET) ontologies. The thesaurus is organized along with the ANSI/NISO Z39.19-2005 Guidelines for the Construction, Format, and Management of Monolingual Controlled Vocabularies, and is published using

  10. [Application of clinical nursing path integrated with holistic nursing in advanced schistosomiasis patients with ascites].

    Science.gov (United States)

    Mei-Zhi, Yuan; Jing-Ru, Sun; Tao, Chen; Xiao-Yu, Zhang; Liang-Cai, He; Jia-Song, Wang

    2016-05-12

    To evaluate the effect of the clinical nursing path integrated with the holistic nursing on advanced schistosomiasis patients with ascites. A total of 226 advanced schistosomiasis patients with ascites were randomly divided into a control group and an experimental group (113 cases each group). The subjects in the experimental group were nursed by the clinical nursing path integrated with the holistic nursing, while those in the control group were nursed only by the holistic nursing. Then the clinical relevant indexes of the two groups were observed, and the quality of life of the patients before and after hospital discharge was assessed. The improvement rate, satisfaction degree, and awareness rate of health knowledge of the patients in the experiment group were 93.8%, 100% and 97.4%, respectively, which were significantly higher than those of the control group (all P holistic nursing can effectively improve the improvement rate and decrease the mortality of the advanced schistosomiasis patients with ascites; meanwhile, it can shorten the hospitalization time and save the hospitalization cost. Therefore, this nursing model is suitable for popularization and application in the treatment and nursing work of the advanced schistosomiasis assistance.

  11. Advanced Value Chain Collaboration in Ghana's Cocoa Sector: An Entry Point for Integrated Landscape Approaches?

    Science.gov (United States)

    Deans, Howard; Ros-Tonen, Mirjam A F; Derkyi, Mercy

    2017-04-15

    Value chain analyses have focused mainly on collaboration between chain actors, often neglecting collaboration "beyond the chain" with non-chain actors to tackle food security, poverty and sustainability issues in the landscapes in which these value chains are embedded. Comparing conventional and advanced value chain collaborations involving small-scale cocoa farmers in Ghana, this paper analyzes the merits of a more integrated approach toward value chain collaboration. It particularly asks whether advanced value chain collaboration targeting cocoa-producing areas potentially offers an entry point for implementing a landscape approach. The findings detail current chain actors and institutions and show how advanced value chain collaboration has a greater positive impact than conventional value chain collaboration on farmers' social, human and natural capital. The paper concludes that the integrated approach, focus on learning, and stable relationships with small-scale farmers inherent in advanced value chain collaboration makes it both more sustainable and effective at the local level than conventional approaches. However, its scope and the actors' jurisdictional powers and self-organization are too limited to be the sole tool in negotiating land use and trade-offs at the landscape level. To evolve as such would require certification beyond the farm level, partnering with other landscape stakeholders, and brokering by bridging organizations.

  12. Adolescents' Use of Basic, Intermediate, and Advanced Device Types for Vaping.

    Science.gov (United States)

    Pepper, Jessica K; MacMonegle, Anna J; Nonnemaker, James M

    2017-12-23

    Advanced models of electronic vaping products (EVPs) likely pose a greater risk to adolescent health than basic or intermediate models because advanced models deliver nicotine more effectively and heat e-liquid to higher temperatures, producing more harmful chemical emissions. However, little is known about adolescents' risk factors for using different device types. We used social media to recruit an online sample of 1,508 U.S. adolescents aged 15-17 who reported past 30-day use of e-cigarettes. We assessed tobacco use, beliefs and knowledge about EVPs, and EVP use behavior, including the device type participants use most frequently. We used multinomial logistic regression to examine differences between adolescents who usually use intermediate versus basic and advanced versus basic devices. Most respondents usually used modifiable advanced devices (56.8%) rather than basic "cigalike" (14.5%) or pen-style intermediate (28.7%) devices. Use of multiple device types was common, particularly among those who primarily used basic devices. Younger age and less frequent vaping were associated with mainly using basic devices. Adolescents who were older, male, personally bought their main device, and had ever mixed e-liquids were at elevated risk for usually using advanced devices. Adolescents who primarily use basic devices may be newer users who are experimenting with multiple devices. Future research should examine which adolescents are most likely to transition to advanced devices in order to develop targeted interventions. Regulators should consider strategies to reduce access to all types of EVPs, such as better enforcement of the current ban on sales to minors. This research addresses two gaps in research on adolescent electronic vaping product use: (1) characterizing use of advanced devices as distinct from intermediate devices rather than grouping them together and (2) examining factors associated with use of specific device types. This study suggests that there

  13. An Expert Opinion on Advanced Insulin Pump Use in Youth with Type 1 Diabetes.

    Science.gov (United States)

    Bode, Bruce W; Kaufman, Francine R; Vint, Nan

    2017-03-01

    Among children and adolescents with type 1 diabetes mellitus, the use of insulin pump therapy has increased since its introduction in the early 1980s. Optimal management of type 1 diabetes mellitus depends on sufficient understanding by patients, their families, and healthcare providers on how to use pump technology. The goal for the use of insulin pump therapy should be to advance proficiency over time from the basics taught at the initiation of pump therapy to utilizing advanced settings to obtain optimal glycemic control. However, this goal is often not met, and appropriate understanding of the full features of pump technology can be lacking. The objective of this review is to provide an expert perspective on the advanced features and use of insulin pump therapy, including practical guidelines for the successful use of insulin pump technology, and other considerations specific to patients and healthcare providers.

  14. Recent advances and progress towards an integrated interdisciplinary thermal-structural finite element technology

    Science.gov (United States)

    Namburu, Raju R.; Tamma, Kumar K.

    1993-01-01

    An integrated finite element approach is presented for interdisciplinary thermal-structural problems. Of the various numerical approaches, finite element methods with direct time integration procedures are most widely used for these nonlinear problems. Traditionally, combined thermal-structural analysis is performed sequentially by transferring data between thermal and structural analysis. This approach is generally effective and routinely used. However, to solve the combined thermal-structural problems, this approach results in cumbersome data transfer, incompatible algorithmic representations, and different discretized element formulations. The integrated approach discussed in this paper effectively combines thermal and structural fields, thus overcoming the above major shortcomings. The approach follows Lax-Wendroff type finite element formulations with flux and stress based representations. As a consequence, this integrated approach uses common algorithmic representations and element formulations. Illustrative test examples show that the approach is effective for integrated thermal-structural problems.

  15. Hadamard type inequalities for m-convex and (α, m)-convex functions via fractional integrals

    Science.gov (United States)

    Ardıç, Merve Avcı; Ekinci, Alper; Akdemir, Ahmet Ocak; Özdemir, M. Emin

    2018-01-01

    In this paper, we established some new Hadamard-type integral inequalities for functions whose derivatives of absolute values are m-convex and (α, m)-convex functions via Riemann-Liouville fractional integrals.

  16. Results on an integral inequality of the opial- type | Rauf | Global ...

    African Journals Online (AJOL)

    Abstract. We obtain integral inequalities which are Opial-type inequalities, mainly by using Jensen's inequality for the case of convex function. Keywords: Integral inequalities, Opial's inequality, Jensen's inequality and convex functions ...

  17. Riemann type algebraic structures and their differential-algebraic integrability analysis

    Directory of Open Access Journals (Sweden)

    Prykarpatsky A.K.

    2010-06-01

    Full Text Available The differential-algebraic approach to studying the Lax type integrability of generalized Riemann type equations is devised. The differentiations and the associated invariant differential ideals are analyzed in detail. The approach is also applied to studying the Lax type integrability of the well known Korteweg-de Vries dynamical system.

  18. NCD Diamond Semiconductor System for Advanced Power Electronics Systems Integration : CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Sumant, Anirudha [AKHAN Semiconductor, Inc., Hoffman Estates, IL (United States)

    2016-07-22

    The integration of 2D materials such as molybdenum disulphide (MoS2) with diamond (3D) was achieved by forming an heterojunction between these two materials and its electrical performance was studied experimentally. The device charactertics did show good rectifying nature when p-type single crystal diamond was integrated with n-type MoS2. These results are very encouraging indicating possible applications in semiconductor electronics, however further studies are required for a detailed understanding of the transport phenomena at the MoS2/diamond interface.

  19. The Neumann Type Systems and Algebro-Geometric Solutions of a System of Coupled Integrable Equations

    International Nuclear Information System (INIS)

    Chen Jinbing; Qiao Zhijun

    2011-01-01

    A system of (1+1)-dimensional coupled integrable equations is decomposed into a pair of new Neumann type systems that separate the spatial and temporal variables for this system over a symplectic submanifold. Then, the Neumann type flows associated with the coupled integrable equations are integrated on the complex tour of a Riemann surface. Finally, the algebro-geometric solutions expressed by Riemann theta functions of the system of coupled integrable equations are obtained by means of the Jacobi inversion.

  20. Investigating the Relationship between Training Type and Treatment Integrity.

    Science.gov (United States)

    Sterling-Turner, Heather E.; Watson, T. Steuart; Wildmon, Mark; Watkins, Carrie; Little, Elizabeth

    2001-01-01

    Investigates the relationship between three training procedures (didactic, modeling, or rehearsal feedback) and treatment integrity. Results indicate that higher levels of treatment integrity were associated with direct training procedures. Discusses implications for treatment planning and potential ramifications for consultants working in…

  1. Limitation to Advanced Life Support in patients admitted to intensive care unit with integrated palliative care

    Science.gov (United States)

    Mazutti, Sandra Regina Gonzaga; Nascimento, Andréia de Fátima; Fumis, Renata Rego Lins

    2016-01-01

    Objective To estimate the incidence of limitations to Advanced Life Support in critically ill patients admitted to an intensive care unit with integrated palliative care. Methods This retrospective cohort study included patients in the palliative care program of the intensive care unit of Hospital Paulistano over 18 years of age from May 1, 2011, to January 31, 2014. The limitations to Advanced Life Support that were analyzed included do-not-resuscitate orders, mechanical ventilation, dialysis and vasoactive drugs. Central tendency measures were calculated for quantitative variables. The chi-squared test was used to compare the characteristics of patients with or without limits to Advanced Life Support, and the Wilcoxon test was used to compare length of stay after Advanced Life Support. Confidence intervals reflecting p ≤ 0.05 were considered for statistical significance. Results A total of 3,487 patients were admitted to the intensive care unit, of whom 342 were included in the palliative care program. It was observed that after entering the palliative care program, it took a median of 2 (1 - 4) days for death to occur in the intensive care unit and 4 (2 - 11) days for hospital death to occur. Many of the limitations to Advanced Life Support (42.7%) took place on the first day of hospitalization. Cardiopulmonary resuscitation (96.8%) and ventilatory support (73.6%) were the most adopted limitations. Conclusion The contribution of palliative care integrated into the intensive care unit was important for the practice of orthothanasia, i.e., the non-extension of the life of a critically ill patient by artificial means. PMID:27626949

  2. Advanced Communication and Control for Distributed Energy Resource Integration: Phase 2 Scientific Report

    Energy Technology Data Exchange (ETDEWEB)

    BPL Global

    2008-09-30

    The objective of this research project is to demonstrate sensing, communication, information and control technologies to achieve a seamless integration of multivendor distributed energy resource (DER) units at aggregation levels that meet individual user requirements for facility operations (residential, commercial, industrial, manufacturing, etc.) and further serve as resource options for electric and natural gas utilities. The fully demonstrated DER aggregation system with embodiment of communication and control technologies will lead to real-time, interactive, customer-managed service networks to achieve greater customer value. Work on this Advanced Communication and Control Project (ACCP) consists of a two-phase approach for an integrated demonstration of communication and control technologies to achieve a seamless integration of DER units to reach progressive levels of aggregated power output. Phase I involved design and proof-of-design, and Phase II involves real-world demonstration of the Phase I design architecture. The scope of work for Phase II of this ACCP involves demonstrating the Phase I design architecture in large scale real-world settings while integrating with the operations of one or more electricity supplier feeder lines. The communication and control architectures for integrated demonstration shall encompass combinations of software and hardware components, including: sensors, data acquisition and communication systems, remote monitoring systems, metering (interval revenue, real-time), local and wide area networks, Web-based systems, smart controls, energy management/information systems with control and automation of building energy loads, and demand-response management with integration of real-time market pricing. For Phase II, BPL Global shall demonstrate the Phase I design for integrating and controlling the operation of more than 10 DER units, dispersed at various locations in one or more Independent System Operator (ISO) Control Areas, at

  3. Method of mechanical quadratures for solving singular integral equations of various types

    Science.gov (United States)

    Sahakyan, A. V.; Amirjanyan, H. A.

    2018-04-01

    The method of mechanical quadratures is proposed as a common approach intended for solving the integral equations defined on finite intervals and containing Cauchy-type singular integrals. This method can be used to solve singular integral equations of the first and second kind, equations with generalized kernel, weakly singular equations, and integro-differential equations. The quadrature rules for several different integrals represented through the same coefficients are presented. This allows one to reduce the integral equations containing integrals of different types to a system of linear algebraic equations.

  4. ADVANCED INTEGRATION OF MULTI-SCALE MECHANICS AND WELDING PROCESS SIMULATION IN WELD INTEGRITY ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, Gery M.; Rudland, David L.; Shim, Do-Jun; Brust, Frederick W.; Babu, Sundarsanam

    2008-06-30

    -driving force by a factor of 2 depending on strain-hardening, pressure level as a % of SMYS, and flaw size. • From years of experience in circumferential fracture analyses and experimentation, there has not been sufficient integration of work performed for other industries into analogous problems facing the oil and gas pipeline markets. Some very basic concepts and problems solved previously in these fields could have circumvented inconsistencies seen in the stress-based and strain-based analysis efforts. For example, in nuclear utility piping work, more detailed elastic-plastic fracture analyses were always validated in their ability to predict loads and displacements (stresses and strains). The eventual implementation of these methodologies will result in acceleration of the industry adoption of higher-strength line-pipe steels.

  5. Integration Science and Technology of Advanced Ceramics for Energy and Environmental Applications

    Science.gov (United States)

    Singh, M.

    2012-01-01

    The discovery of new and innovative materials has been known to culminate in major turning points in human history. The transformative impact and functional manifestation of new materials have been demonstrated in every historical era by their integration into new products, systems, assemblies, and devices. In modern times, the integration of new materials into usable products has a special relevance for the technological development and economic competitiveness of industrial societies. Advanced ceramic technologies dramatically impact the energy and environmental landscape due to potential wide scale applications in all aspects of energy production, storage, distribution, conservation, and efficiency. Examples include gas turbine propulsion systems, fuel cells, thermoelectrics, photovoltaics, distribution and transmission systems based on superconductors, nuclear power generation, and waste disposal. Robust ceramic integration technologies enable hierarchical design and manufacturing of intricate ceramic components starting with geometrically simpler units that are subsequently joined to themselves and/or to metals to create components with progressively higher levels of complexity and functionality. However, for the development of robust and reliable integrated systems with optimum performance under different operating conditions, the detailed understanding of various thermochemical and thermomechanical factors is critical. Different approaches are required for the integration of ceramic-metal and ceramic-ceramic systems across length scales (macro to nano). In this presentation, a few examples of integration of ceramic to metals and ceramic to ceramic systems will be presented. Various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Potential opportunities and need for the development of innovative design philosophies, approaches, and

  6.  High prevalence of undiagnosed liver cirrhosis and advanced fibrosis in type 2 diabetic patients.

    Science.gov (United States)

    Arab, Juan P; Barrera, Francisco; Gallego, Consuelo; Valderas, Juan P; Uribe, Sergio; Tejos, Cristian; Serrano, Cristóbal; Serrano, Cristóbal; Huete, Álvaro; Liberona, Jessica; Labbé, Pilar; Quiroga, Teresa; Benítez, Carlos; Irarrázaval, Pablo; Riquelme, Arnoldo; Arrese, Marco

    2016-01-01

     Background. Patients with type 2 diabetes mellitus (T2DM) are at risk for developing end-stage liver disease due to nonalcoholic steatohepatitis (NASH), the aggressive form of non-alcoholic fatty liver disease (NAFLD). Data on prevalence of advanced fibrosis among T2DM patients is scarce. To evaluate prevalence of steatosis, advanced fibrosis and cirrhosis using non-invasive methods in T2DM patients. 145 consecutive T2DM patients (> 55 years-old) were prospectively recruited. Presence of cirrhosis and advanced fibrosis was evaluated by magnetic resonance imaging (MRI) and NAFLD fibrosis score (NFS) respectively. Exclusion criteria included significant alcohol consumption, markers of viral hepatitis infection or other liver diseases. Results are expressed in percentage or median (interquartile range). 52.6% of patients were women, the median age was 60 years old (57-64), mean BMI was 29.6 ± 4.7 kg/m2 and diabetes duration was 7.6 ± 6.9 years. A high prevalence of liver steatosis (63.9%), advanced fibrosis assessed by NFS (12.8%) and evidence of liver cirrhosis in MRI (6.0%) was observed. In a multivariate analysis GGT > 82 IU/L (P = 0.004) and no alcohol intake (P = 0.032) were independently associated to advanced fibrosis. A high frequency of undiagnosed advanced fibrosis and cirrhosis was observed in non-selected T2DM patients. Screening of these conditions may be warranted in this patient population.

  7. Integral inequalities under beta function and preinvex type functions.

    Science.gov (United States)

    Ahmad, Izhar

    2016-01-01

    In the present paper, the notion of P-preinvex function is introduced and new integral inequalities for this kind of function along with beta function are establised. The work extends the results appeared in the literature.

  8. The impact of IAIMS on the work of information experts. Integrated Advanced Information Management Systems.

    Science.gov (United States)

    Ash, J

    1995-10-01

    Integrated Advanced Information Management Systems (IAIMS) programs differ but have certain characteristics in common. Technological and organizational integration are universal goals. As integration takes place, what happens to those implementing the vision? A survey of 125 staff members, or information experts, involved in information or informatics at an IAIMS-funded institution was conducted during the last year of the implementation phase. The purpose was to measure the impact of IAIMS on the jobs of those in the library and related service units, and the computing, telecommunications, and health informatics divisions. The researchers used newly developed scales measuring levels of integration (knowledge of and involvement with other departments), customer orientation (focus on the user), and informatedness (changes in the nature of work beyond automation of former routines). Ninety-four percent of respondents indicated that their jobs had changed a great deal; the changes were similar regardless of division. To further investigate the impact of IAIMS on librarians in particular, a separate skills survey was conducted. The IAIMS librarians indicated that technology and training skills are especially needed in the new, integrated environment.

  9. SCIENTIFIC RATIONALITY: ESSENCE, TYPES, TREND FOR INTEGRATION, PRACTICAL SIGNIFICANCE

    Directory of Open Access Journals (Sweden)

    Fokina Zoya Titovna

    2012-10-01

    It is proven that in the time of substantial advancement of contemporary technology, incorporation of humanitarian values into the domain of natural and engineering sciences and formulation of the issue of ecological and ethical examination of engineering projects will prevent a global ecological catastrophe and collapse of the civilization.

  10. Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process.

    Science.gov (United States)

    Zhou, Lei; Xu, Zhenming

    2012-05-01

    Over the past 30 years, China has been suffering from negative environmental impacts from distempered waste electrical and electronic equipments (WEEE) recycling activities. For the purpose of environmental protection and resource reusing, China made a great effort to improve WEEE recycling. This article reviews progresses of three major fields in the development of China's WEEE recycling industry: legal system, formal recycling system, and advanced integrated process. Related laws concerning electronic waste (e-waste) management and renewable resource recycling are analyzed from aspects of improvements and loopholes. The outcomes and challenges for existing formal recycling systems are also discussed. The advantage and deficiency related to advanced integrated recycling processes for typical e-wastes are evaluated respectively. Finally, in order to achieve high disposal rates of WEEE, high-quantify separation of different materials in WEEE and high added value final products produced by separated materials from WEEE, an idea of integrated WEEE recycling system is proposed to point future development of WEEE recycling industry. © 2012 American Chemical Society

  11. Integrating Diverse Types of Genomic Data to Identify Genes that Underlie Adverse Pregnancy Phenotypes.

    Directory of Open Access Journals (Sweden)

    Jibril Hirbo

    Full Text Available Progress in understanding complex genetic diseases has been bolstered by synthetic approaches that overlay diverse data types and analyses to identify functionally important genes. Pre-term birth (PTB, a major complication of pregnancy, is a leading cause of infant mortality worldwide. A major obstacle in addressing PTB is that the mechanisms controlling parturition and birth timing remain poorly understood. Integrative approaches that overlay datasets derived from comparative genomics with function-derived ones have potential to advance our understanding of the genetics of birth timing, and thus provide insights into the genes that may contribute to PTB. We intersected data from fast evolving coding and non-coding gene regions in the human and primate lineage with data from genes expressed in the placenta, from genes that show enriched expression only in the placenta, as well as from genes that are differentially expressed in four distinct PTB clinical subtypes. A large fraction of genes that are expressed in placenta, and differentially expressed in PTB clinical subtypes (23-34% are fast evolving, and are associated with functions that include adhesion neurodevelopmental and immune processes. Functional categories of genes that express fast evolution in coding regions differ from those linked to fast evolution in non-coding regions. Finally, there is a surprising lack of overlap between fast evolving genes that are differentially expressed in four PTB clinical subtypes. Integrative approaches, especially those that incorporate evolutionary perspectives, can be successful in identifying potential genetic contributions to complex genetic diseases, such as PTB.

  12. Advancing Commercialization of Algal Biofuel through Increased Biomass Productivity and Technical Integration

    Energy Technology Data Exchange (ETDEWEB)

    Anton, David [Cellana, LLC, Kailua-Kona, HI (United States)

    2016-12-31

    The proposed project built on the foundation of over several years years of intensive and ground-breaking R&D work at Cellana's Kona Demonstration Facility (KDF). Phycological and engineering solutions were provided to tackle key cultivation issues and technical barriers limiting algal biomass productivity identified through work conducted outdoors at industrial (1 acre) scale. The objectives of this project were to significantly improve algal biomass productivity and reduce operational cost in a seawater-based system, using results obtained from two top-performing algal strains as the baseline while technically advancing and more importantly, integrating the various unit operations involved in algal biomass production, processing, and refining.

  13. Advanced image based methods for structural integrity monitoring: Review and prospects

    Science.gov (United States)

    Farahani, Behzad V.; Sousa, Pedro José; Barros, Francisco; Tavares, Paulo J.; Moreira, Pedro M. G. P.

    2018-02-01

    There is a growing trend in engineering to develop methods for structural integrity monitoring and characterization of in-service mechanical behaviour of components. The fast growth in recent years of image processing techniques and image-based sensing for experimental mechanics, brought about a paradigm change in phenomena sensing. Hence, several widely applicable optical approaches are playing a significant role in support of experiment. The current review manuscript describes advanced image based methods for structural integrity monitoring, and focuses on methods such as Digital Image Correlation (DIC), Thermoelastic Stress Analysis (TSA), Electronic Speckle Pattern Interferometry (ESPI) and Speckle Pattern Shearing Interferometry (Shearography). These non-contact full-field techniques rely on intensive image processing methods to measure mechanical behaviour, and evolve even as reviews such as this are being written, which justifies a special effort to keep abreast of this progress.

  14. Integrating knowledge across domains to advance the science of health behavior: overcoming challenges and facilitating success.

    Science.gov (United States)

    Klein, William M P; Grenen, Emily G; O'Connell, Mary; Blanch-Hartigan, Danielle; Chou, Wen-Ying Sylvia; Hall, Kara L; Taber, Jennifer M; Vogel, Amanda L

    2017-03-01

    Health behaviors often co-occur and have common determinants at multiple levels (e.g., individual, relational, environmental). Nevertheless, research programs often examine single health behaviors without a systematic attempt to integrate knowledge across behaviors. This paper highlights the significant potential of cross-cutting behavioral research to advance our understanding of the mechanisms and causal factors that shape health behaviors. It also offers suggestions for how researchers could develop more effective interventions. We highlight barriers to such an integrative science along with potential steps that can be taken to address these barriers. With a more nuanced understanding of health behavior, redundancies in research can be minimized, and a stronger evidence base for the development of health behavior interventions can be realized.

  15. Greening the Grid: Advances in Production Cost Modeling for India Renewable Energy Grid Integration Study

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, Jaquelin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palchak, David [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-07-12

    The Greening the Grid: Pathways to Integrate 175 Gigawatts of Renewable Energy into India's Electric Grid study uses advanced weather and power system modeling to explore the operational impacts of meeting India's 2022 renewable energy targets and identify actions that may be favorable for integrating high levels of renewable energy into the Indian grid. The study relies primarily on a production cost model that simulates optimal scheduling and dispatch of available generation in a future year (2022) by minimizing total production costs subject to physical, operational, and market constraints. This fact sheet provides a detailed look at each of these models, including their common assumptions and the insights provided by each.

  16. Advanced field-solver techniques for RC extraction of integrated circuits

    CERN Document Server

    Yu, Wenjian

    2014-01-01

    Resistance and capacitance (RC) extraction is an essential step in modeling the interconnection wires and substrate coupling effect in nanometer-technology integrated circuits (IC). The field-solver techniques for RC extraction guarantee the accuracy of modeling, and are becoming increasingly important in meeting the demand for accurate modeling and simulation of VLSI designs. Advanced Field-Solver Techniques for RC Extraction of Integrated Circuits presents a systematic introduction to, and treatment of, the key field-solver methods for RC extraction of VLSI interconnects and substrate coupling in mixed-signal ICs. Various field-solver techniques are explained in detail, with real-world examples to illustrate the advantages and disadvantages of each algorithm. This book will benefit graduate students and researchers in the field of electrical and computer engineering, as well as engineers working in the IC design and design automation industries. Dr. Wenjian Yu is an Associate Professor at the Department of ...

  17. Integrating working level monitor EML Type TF-11

    International Nuclear Information System (INIS)

    Latner, N.; Watnick, S.; Graveson, R.T.

    1981-01-01

    A time-integrating working level radiation monitor is described. The purpose of the instrument is the evaluation of the alpha emission from radon and its daughter products. It has been designed to be virtually silent in operation, making it suitable for residential studies

  18. Advancing Exposure Science through Chemical Data Curation and Integration in the Comparative Toxicogenomics Database.

    Science.gov (United States)

    Grondin, Cynthia J; Davis, Allan Peter; Wiegers, Thomas C; King, Benjamin L; Wiegers, Jolene A; Reif, David M; Hoppin, Jane A; Mattingly, Carolyn J

    2016-10-01

    Exposure science studies the interactions and outcomes between environmental stressors and human or ecological receptors. To augment its role in understanding human health and the exposome, we aimed to centralize and integrate exposure science data into the broader biological framework of the Comparative Toxicogenomics Database (CTD), a public resource that promotes understanding of environmental chemicals and their effects on human health. We integrated exposure data within the CTD to provide a centralized, freely available resource that facilitates identification of connections between real-world exposures, chemicals, genes/proteins, diseases, biological processes, and molecular pathways. We developed a manual curation paradigm that captures exposure data from the scientific literature using controlled vocabularies and free text within the context of four primary exposure concepts: stressor, receptor, exposure event, and exposure outcome. Using data from the Agricultural Health Study, we have illustrated the benefits of both centralization and integration of exposure information with CTD core data. We have described our curation process, demonstrated how exposure data can be accessed and analyzed in the CTD, and shown how this integration provides a broad biological context for exposure data to promote mechanistic understanding of environmental influences on human health. Curation and integration of exposure data within the CTD provides researchers with new opportunities to correlate exposures with human health outcomes, to identify underlying potential molecular mechanisms, and to improve understanding about the exposome. Grondin CJ, Davis AP, Wiegers TC, King BL, Wiegers JA, Reif DM, Hoppin JA, Mattingly CJ. 2016. Advancing exposure science through chemical data curation and integration in the Comparative Toxicogenomics Database. Environ Health Perspect 124:1592-1599; http://dx.doi.org/10.1289/EHP174.

  19. Advanced Interval Type-2 Fuzzy Sliding Mode Control for Robot Manipulator

    Directory of Open Access Journals (Sweden)

    Ji-Hwan Hwang

    2017-01-01

    Full Text Available In this paper, advanced interval type-2 fuzzy sliding mode control (AIT2FSMC for robot manipulator is proposed. The proposed AIT2FSMC is a combination of interval type-2 fuzzy system and sliding mode control. For resembling a feedback linearization (FL control law, interval type-2 fuzzy system is designed. For compensating the approximation error between the FL control law and interval type-2 fuzzy system, sliding mode controller is designed, respectively. The tuning algorithms are derived in the sense of Lyapunov stability theorem. Two-link rigid robot manipulator with nonlinearity is used to test and the simulation results are presented to show the effectiveness of the proposed method that can control unknown system well.

  20. Advancing Environmental Flow Science: Developing Frameworks for Altered Landscapes and Integrating Efforts Across Disciplines

    Science.gov (United States)

    Brewer, Shannon K.; McManamay, Ryan A.; Miller, Andrew D.; Mollenhauer, Robert; Worthington, Thomas A.; Arsuffi, Tom

    2016-08-01

    Environmental flows represent a legal mechanism to balance existing and future water uses and sustain non-use values. Here, we identify current challenges, provide examples where they are important, and suggest research advances that would benefit environmental flow science. Specifically, environmental flow science would benefit by (1) developing approaches to address streamflow needs in highly modified landscapes where historic flows do not provide reasonable comparisons, (2) integrating water quality needs where interactions are apparent with quantity but not necessarily the proximate factor of the ecological degradation, especially as frequency and magnitudes of inflows to bays and estuaries, (3) providing a better understanding of the ecological needs of native species to offset the often unintended consequences of benefiting non-native species or their impact on flows, (4) improving our understanding of the non-use economic value to balance consumptive economic values, and (5) increasing our understanding of the stakeholder socioeconomic spatial distribution of attitudes and perceptions across the landscape. Environmental flow science is still an emerging interdisciplinary field and by integrating socioeconomic disciplines and developing new frameworks to accommodate our altered landscapes, we should help advance environmental flow science and likely increase successful implementation of flow standards.

  1. Advancing environmental flow science: Developing frameworks for altered landscapes and integrating efforts across disciplines.

    Science.gov (United States)

    Brewer, Shannon K.; McManamay, Ryan A.; Miller, Andrew D.; Mollenhauer, Robert; Worthington, Thomas A.; Arsuffi, Tom

    2016-01-01

    Environmental flows represent a legal mechanism to balance existing and future water uses and sustain non-use values. Here, we identify current challenges, provide examples where they are important, and suggest research advances that would benefit environmental flow science. Specifically, environmental flow science would benefit by (1) developing approaches to address streamflow needs in highly modified landscapes where historic flows do not provide reasonable comparisons, (2) integrating water quality needs where interactions are apparent with quantity but not necessarily the proximate factor of the ecological degradation, especially as frequency and magnitudes of inflows to bays and estuaries, (3) providing a better understanding of the ecological needs of native species to offset the often unintended consequences of benefiting non-native species or their impact on flows, (4) improving our understanding of the non-use economic value to balance consumptive economic values, and (5) increasing our understanding of the stakeholder socioeconomic spatial distribution of attitudes and perceptions across the landscape. Environmental flow science is still an emerging interdisciplinary field and by integrating socioeconomic disciplines and developing new frameworks to accommodate our altered landscapes, we should help advance environmental flow science and likely increase successful implementation of flow standards.

  2. Gate array type integrated circuits: technology and reliability

    International Nuclear Information System (INIS)

    Kumurdjian, P.

    1984-03-01

    This paper summarizes a study on a logical C-MOS circuit. After a short presentation, the technical parameters and performance desired are given. On this basis, the dispersion of measurements, according to the series, is examined. The processes of personalization are then analyzed. Finally, some results on the burn-in and aging of circuits are presented. This paper concludes with the methods adopted to obtain a reliable integrated circuit [fr

  3. Sharp Gronwall-Bellman type integral inequalities with delay

    Directory of Open Access Journals (Sweden)

    István Győri

    2016-11-01

    Full Text Available Various attempts have been made to give an upper bound for the solutions of the delayed version of the Gronwall-Bellman integral inequality, but the obtained estimations are not sharp. In this paper a new approach is presented to get sharp estimations for the nonnegative solutions of the considered delayed inequalities. The results are based on the idea of the generalized characteristic inequality. Our method gives sharp estimation, and therefore the results are more exact than the earlier ones.

  4. Scale relativity theory and integrative systems biology: 2. Macroscopic quantum-type mechanics.

    Science.gov (United States)

    Nottale, Laurent; Auffray, Charles

    2008-05-01

    In these two companion papers, we provide an overview and a brief history of the multiple roots, current developments and recent advances of integrative systems biology and identify multiscale integration as its grand challenge. Then we introduce the fundamental principles and the successive steps that have been followed in the construction of the scale relativity theory, which aims at describing the effects of a non-differentiable and fractal (i.e., explicitly scale dependent) geometry of space-time. The first paper of this series was devoted, in this new framework, to the construction from first principles of scale laws of increasing complexity, and to the discussion of some tentative applications of these laws to biological systems. In this second review and perspective paper, we describe the effects induced by the internal fractal structures of trajectories on motion in standard space. Their main consequence is the transformation of classical dynamics into a generalized, quantum-like self-organized dynamics. A Schrödinger-type equation is derived as an integral of the geodesic equation in a fractal space. We then indicate how gauge fields can be constructed from a geometric re-interpretation of gauge transformations as scale transformations in fractal space-time. Finally, we introduce a new tentative development of the theory, in which quantum laws would hold also in scale space, introducing complexergy as a measure of organizational complexity. Initial possible applications of this extended framework to the processes of morphogenesis and the emergence of prokaryotic and eukaryotic cellular structures are discussed. Having founded elements of the evolutionary, developmental, biochemical and cellular theories on the first principles of scale relativity theory, we introduce proposals for the construction of an integrative theory of life and for the design and implementation of novel macroscopic quantum-type experiments and devices, and discuss their potential

  5. Improvement of nuclear ship engineering simulation system. Hardware renewal and interface improvement of the integral type reactor

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Hiroki; Kyoya, Masahiko; Shimazaki, Junya [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kano, Tadashi [KCS, Co., Mito, Ibaraki (Japan); Takahashi, Teruo [Energis, Co., Kobe, Hyogo (Japan)

    2001-10-01

    JAERI had carried out the design study about a lightweight and compact integral type reactor (an advanced marine reactor) with passive safety equipment as a power source for the future nuclear ships, and completed an engineering design. We have developed the simulator for the integral type reactor to confirm the design and operation performance and to utilize the study of automation of the reactor operation. The simulator can be used also for future research and development of a compact reactor. However, the improvement in a performance of hardware and a human machine interface of software of the simulator were needed for future research and development. Therefore, renewal of hardware and improvement of software have been conducted. The operability of the integral-reactor simulator has been improved. Furthermore, this improvement with the hardware and software on the market brought about better versatility, maintainability, extendibility and transfer of the system. This report mainly focuses on contents of the enhancement in a human machine interface, and describes hardware renewal and the interface improvement of the integral type reactor simulator. (author)

  6. Iterative Solutions of Nonlinear Integral Equations of Hammerstein Type

    Directory of Open Access Journals (Sweden)

    Abebe R. Tufa

    2015-11-01

    Full Text Available Let H be a real Hilbert space. Let F,K : H → H be Lipschitz monotone mappings with Lipschtiz constants L1and L2, respectively. Suppose that the Hammerstein type equation u + KFu = 0 has a solution in H. It is our purpose in this paper to construct a new explicit iterative sequence and prove strong convergence of the sequence to a solution of the generalized Hammerstein type equation. The results obtained in this paper improve and extend known results in the literature.

  7. Base Stock Policy in a Join-Type Production Line with Advanced Demand Information

    Science.gov (United States)

    Hiraiwa, Mikihiko; Tsubouchi, Satoshi; Nakade, Koichi

    Production control such as the base stock policy, the kanban policy and the constant work-in-process policy in a serial production line has been studied by many researchers. Production lines, however, usually have fork-type, join-type or network-type figures. In addition, in most previous studies on production control, a finished product is required at the same time as arrival of demand at the system. Demand information is, however, informed before due date in practice. In this paper a join-type (assembly) production line under base stock control with advanced demand information in discrete time is analyzed. The recursive equations for the work-in-process are derived. The heuristic algorithm for finding appropriate base stock levels of all machines at short time is proposed and the effect of advanced demand information is examined by simulation with the proposed algorithm. It is shown that the inventory cost can decreases with little backlogs by using the appropriate amount of demand information and setting appropriate base stock levels.

  8. TypingSuite: Integrated Software for Presenting Stimuli, and Collecting and Analyzing Typing Data

    Science.gov (United States)

    Mazerolle, Erin L.; Marchand, Yannick

    2015-01-01

    Research into typing patterns has broad applications in both psycholinguistics and biometrics (i.e., improving security of computer access via each user's unique typing patterns). We present a new software package, TypingSuite, which can be used for presenting visual and auditory stimuli, collecting typing data, and summarizing and analyzing the…

  9. Blood group antigen A type 3 expression is a favorable prognostic factor in advanced NSCLC.

    Science.gov (United States)

    Schmidt, L H; Kuemmel, A; Schliemann, C; Schulze, A; Humberg, J; Mohr, M; Görlich, D; Hartmann, W; Bröckling, S; Marra, A; Hillejan, L; Goletz, S; Karsten, U; Berdel, W E; Spieker, T; Wiewrodt, R

    2016-02-01

    Several blood group-related carbohydrate antigens are prognosis-relevant markers of tumor tissues. A type 3 (repetitive A) is a blood group antigen specific for A1 erythrocytes. Its potential expression in tumor tissues has so far not been examined. We have evaluated its expression in normal lung and in lung cancer using a novel antibody (A69-A/E8). For comparison an anti-A antibody specific to A types 1 and 2 was used, because its expression on lung cancer tissue has been previously reported to be of prognostic relevance. Resected tissue samples of 398 NSCLC patients were analyzed in immunohistochemistry using tissue microarrays. Expression of A type 3 was not observed in non-malignant lung tissues. A type 3 was expressed on tumor cells of around half of NSCLC patients of blood group A1 (ptype 1/2 antigen was observed (p=0.562), the expression of A type 3 by tumor cells indicated a highly significant favorable prognosis among advanced NSCLC patients (p=0.011) and in NSCLC patients with lymphatic spread (p=0.014). Univariate prognostic results were confirmed in a Cox proportional hazards model. In this study we present for the first time prognostic data for A type 3 antigen expression in lung cancer patients. Prospective studies should be performed to confirm the prognostic value of A type 3 expression for an improved risk stratification in NSCLC patients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. On the integrability of the generalized Fisher-type nonlinear diffusion equations

    International Nuclear Information System (INIS)

    Wang Dengshan; Zhang Zhifei

    2009-01-01

    In this paper, the geometric integrability and Lax integrability of the generalized Fisher-type nonlinear diffusion equations with modified diffusion in (1+1) and (2+1) dimensions are studied by the pseudo-spherical surface geometry method and prolongation technique. It is shown that the (1+1)-dimensional Fisher-type nonlinear diffusion equation is geometrically integrable in the sense of describing a pseudo-spherical surface of constant curvature -1 only for m = 2, and the generalized Fisher-type nonlinear diffusion equations in (1+1) and (2+1) dimensions are Lax integrable only for m = 2. This paper extends the results in Bindu et al 2001 (J. Phys. A: Math. Gen. 34 L689) and further provides the integrability information of (1+1)- and (2+1)-dimensional Fisher-type nonlinear diffusion equations for m = 2

  11. Episodes of breathlessness: types and patterns - a qualitative study exploring experiences of patients with advanced diseases.

    Science.gov (United States)

    Simon, Steffen T; Higginson, Irene J; Benalia, Hamid; Gysels, Marjolein; Murtagh, Fliss Em; Spicer, James; Bausewein, Claudia

    2013-06-01

    Despite the high prevalence and impact of episodic breathlessness, information about characteristics and patterns is scarce. To explore the experience of patients with advanced disease suffering from episodic breathlessness, in order to describe types and patterns. Qualitative design using in-depth interviews with patients suffering from advanced stages of chronic heart failure, chronic obstructive pulmonary disease, lung cancer or motor neurone disease. As part of the interviews, patients were asked to draw a graph to illustrate typical patterns of breathlessness episodes. Interviews were tape-recorded, transcribed verbatim and analysed using Framework Analysis. The graphs were grouped according to their patterns. Fifty-one participants (15 chronic heart failure, 14 chronic obstructive pulmonary disease, 13 lung cancer and 9 motor neurone disease) were included (mean age 68.2 years, 30 of 51 men, mean Karnofsky 63.1, mean breathlessness intensity 3.2 of 10). Five different types of episodic breathlessness were described: triggered with normal level of breathlessness, triggered with predictable response (always related to trigger level, e.g. slight exertion causes severe breathlessness), triggered with unpredictable response (not related to trigger level), non-triggered attack-like (quick onset, often severe) and wave-like (triggered or non-triggered, gradual onset). Four patterns of episodic breathlessness could be identified based on the graphs with differences regarding onset and recovery of episodes. These did not correspond with the types of breathlessness described before. Patients with advanced disease experience clearly distinguishable types and patterns of episodic breathlessness. The understanding of these will help clinicians to tailor specific management strategies for patients who suffer from episodes of breathlessness.

  12. Study on advanced systematic function of the JNC geological disposal technical information integration system. Research document

    International Nuclear Information System (INIS)

    Ishihara, Yoshinao; Fukui, Hiroshi; Sagawa, Hiroshi; Matsunaga, Kenichi; Ito Takaya

    2004-02-01

    In this study, while attaining systematization about the technical know-how mutually utilized between geology environmental field, disposal technology (design) field and safety assessment field, the share function of general information in which the formation of an information share and the use promotion between the technical information management databases built for every field were aimed at as an advancement of the function of JNC Geological Disposal Technical Information Integration System considered, and the system function for realizing considered in integration of technical information. (1) Since the concrete information about geology environment which is gradually updated with progress of stratum disposal research, or increases in reflected suitable for research of design and safety assessment. After arranging the form suitable for systematizing technical information, while arranging the technical information in both the fields of design and safety assessment with the form of two classes based on tasks/works, it systematized planning adjustment about delivery of technical information with geology environmental field. (2) In order to aim at integration of 3-fields technical information of geological disposal, based on the examination result of systematization of technical information, the function of mutual use of the information managed in two or more databases was considered. Moreover, while considering system functions, such as management of the use history of technical information, connection of information use, and a notice of common information, the system operation windows in consideration of the ease of operation was examined. (author)

  13. Integration of Palliative Care Advanced Practice Nurses Into Intensive Care Unit Teams.

    Science.gov (United States)

    O'Mahony, Sean; Johnson, Tricia J; Amer, Shawn; McHugh, Marlene E; McHenry, Janet; Fosler, Laura; Kvetan, Vladimir

    2017-05-01

    Referrals to palliative care for patients at the end of life in the intensive care unit (ICU) often happen late in the ICU stay, if at all. The integration of a palliative medicine advanced practice nurse (APN) is one potential strategy for proactively identifying patients who could benefit from this service. To evaluate the association between the integration of palliative medicine APNs into the routine operations of ICUs and hospital costs at 2 different institutions, Montefiore Medical Center (MMC) and Rush University Medical Center. The association between collaborative palliative care consultation service programs and hospital costs per patient was evaluated for the 2 institutions. Hospital costs were compared for patients with and without a referral to palliative care using Mann-Whitney U tests. Hospital nonroom and board costs at the Weiler campus of MMC were significantly lower for patients with palliative care compared with those who did not receive palliative care (Median = US$6643 vs US$12 399, P integration of APNs into a palliative care team for case finding may be a promising strategy, but more work is needed to determine whether reductions in cost are significant.

  14. Inversion of gravity and gravity gradiometry data for density contrast surfaces using Cauchy-type integrals

    DEFF Research Database (Denmark)

    Zhdanov, Michael; Cai, Hongzhu

    2014-01-01

    We introduce a new method of modeling and inversion of potential field data generated by a density contrast surface. Our method is based on 3D Cauchy-type integral representation of the potential fields. Traditionally, potential fields are calculated using volume integrals of the domains occupied...... by anomalous masses subdivided into prismatic cells. This discretization is computationally expensive, especially in a 3D case. The Cauchy-type integral technique makes it possible to represent the gravity field and its gradients as surface integrals. This is especially significant in the solution of problems...

  15. Sloshing and fluid-structure interaction in a 400-MWe pool-type advanced fast reactor

    International Nuclear Information System (INIS)

    Ma, D.C.; Gvildys, J.; Chang, Y.W.

    1987-01-01

    This paper describes the seismic analysis of a 400-MWe advanced fast reactor under 0.3 g SSE ground excitation. Two types of analyses are performed - the sloshing analysis and the fluid-structure interaction analysis. In the sloshing analysis, the sloshing frequency and wave patterns are calculated. The maximum wave height and the sloshing forces exerted on the submerged components and the primary tank are evaluated. In the fluid-structure interaction analysis, the maximum horizontal acceleration for the reactor core and the relative displacement between the reactor core and UIS are examined. The fluid-coupling phenomena between various components are investigated. Seismic stresses at critical areas are examined. The results obtained from this study are very useful to the design of the advanced reactors. Meanwhile, the computer code FLUSTR-ANL has proved to be a useful analytical tool for assessing the complicated seismic fluid-structure interactions and sloshing in the fast reactor systems. 10 refs., 25 figs

  16. BioinformatiqTM - integrating data types for proteomic discovery

    International Nuclear Information System (INIS)

    Arthur, J.W.; Harrison, M.; Manoharan, A.; Traini, M.; Shaw, E.; Wilkins, M.

    2001-01-01

    Proteomics (Wilkins et al. 1997) involves the large-scale analysis of expressed proteins. At each stage of the discovery process the researcher accumulates large volumes of data. These include: clinical or biological data about the sample being studied; details of sample purification and separation; images of 2D gels and associated information; MALDI mass spectra; MS/MS and PSD spectra; as well as meta-data relating to the projects undertaken and experiments performed. All this must be combined with existing databases of protein and EST sequences, post-translational modifications, and protein glycosylation, then processed with sophisticated bioinformatics tools in order to extract meaningful answers to questions of biological, clinical, and agricultural significance. BioinformatlQ TM is a web-based application for the storage, management, and automated bioinformatic analysis of proteomic information. This poster will demonstrate the integration of these disparate data sources in proteomics

  17. Beneficial effects through aggressive coronary screening for type 2 diabetes patients with advanced vascular complications

    Science.gov (United States)

    Tsujimoto, Tetsuro; Sugiyama, Takehiro; Yamamoto-Honda, Ritsuko; Kishimoto, Miyako; Noto, Hiroshi; Morooka, Miyako; Kubota, Kazuo; Kamimura, Munehiro; Hara, Hisao; Kajio, Hiroshi; Kakei, Masafumi; Noda, Mitsuhiko

    2016-01-01

    Abstract Glycemic control alone does not reduce cardiovascular events in patients with type 2 diabetes (T2D), and routine screening of all T2D patients for asymptomatic coronary artery disease (CAD) is not effective for preventing acute cardiac events. We examined the effectiveness of an aggressive screening protocol for asymptomatic CAD in T2D patients with advanced vascular complications. We designed a 3-year cohort study investigating the effectiveness of the aggressive coronary screening for T2D patients with advanced vascular complications and no known coronary events using propensity score adjusted analysis at a national center in Japan. Eligibility criteria included T2D without known coronary events and with any 1 of the following 4 complications: advanced diabetic retinopathy, advanced chronic kidney disease, peripheral artery disease, or cerebrovascular disease. In the aggressive screening group (n = 122), all patients received stress single photon emission computed tomography and those exhibiting myocardial perfusion abnormalities underwent coronary angiography. In the conventional screening group (n = 108), patients were examined for CAD at the discretion of their medical providers. Primary endpoint was composite outcome of cardiovascular death and nonfatal cardiovascular events. Asymptomatic CAD with ≥70% stenosis was detected in 39.3% of patients completing aggressive screening. The proportions achieving revascularization and receiving intensive medical therapy within 90 days after the screening were significantly higher in the aggressive screening group than in the conventional screening group [19.7% vs 0% (P < 0.001) and 48.4% vs 9.3% (P < 0.001), respectively]. The cumulative rate of primary composite outcome was significantly lower in the aggressive screening group according to a propensity score adjusted Cox proportional hazards model (hazard ratio, 0.35; 95% confidence interval, 0.12–0.96; P = 0.04). Aggressive coronary screening for

  18. Integration of Multiple Contractors with Performance Type of Contracts

    International Nuclear Information System (INIS)

    BURDGE, L.F.

    2000-01-01

    The management practices, procedures, and processes that are suited to managing Management and Operation (MandO) type of contracts at Department of Energy (DOE) sites, which were cost reimbursement with award fee, are not well suited to managing contracts where fee is determined by performance metrics. Thus a different style of management, requiring substantial revamping of the management process, is needed. This shift in philosophy also requires a dramatic shift in culture. This paper will describe how these changes are being managed at the River Protection Project (RPP), located at the DOE's Hanford Site in Washington State, one of DOE's largest and highest risk environmental clean-up project

  19. Outcomes after combined modality therapy for EGFR-mutant and wild-type locally advanced NSCLC.

    Science.gov (United States)

    Mak, Raymond H; Doran, Elizabeth; Muzikansky, Alona; Kang, Josephine; Neal, Joel W; Baldini, Elizabeth H; Choi, Noah C; Willers, Henning; Jackman, David M; Sequist, Lecia V

    2011-01-01

    Epidermal growth factor receptor (EGFR) mutations identify a unique biological subtype of non-small cell lung cancer (NSCLC). Treatment outcomes for EGFR-mutant locally advanced NSCLC patients have not been well described. We retrospectively examined outcomes after combined modality therapy including thoracic radiation therapy (RT) in 123 patients with locally advanced NSCLC and known EGFR mutation status. Outcomes were compared using Kaplan-Meier analysis, the log-rank test, and multivariate Cox regression models. All 123 patients underwent thoracic RT; 25% had tumors with EGFR mutations and 94% had stage III disease. Overall, 81% received chemotherapy concurrent with RT and 55% underwent surgical resection. With a median follow-up of 27.5 months, the overall survival (OS) rate was significantly higher in patients with EGFR-mutant tumors than in those with wild-type EGFR tumors (2-year estimate: 92.6% versus 69.0%; p = .04). The 2-year relapse-free survival and distant recurrence rates did not differ significantly by genotype. The 2-year locoregional recurrence rate (LRR) was significantly lower in EGFR-mutant than in wild-type EGFR patients (17.8% versus 41.7%; p = .005). EGFR-mutant genotype was associated with a lower risk for LRR on multivariate analysis, but not OS, after adjusting for surgery and other potential confounders. We observed that EGFR-mutant patients with locally advanced NSCLC treated with RT had lower rates of LRR than wild-type EGFR patients, raising the hypothesis that EGFR mutations may confer sensitivity to RT and/or chemotherapy. The association between mutation status and OS after combined modality therapy was less robust. Our data may serve as a useful baseline estimate of outcomes by EGFR genotype for future prospective studies.

  20. Kulish-Sklyanin-type models: Integrability and reductions

    Science.gov (United States)

    Gerdjikov, V. S.

    2017-08-01

    We start with a Riemann-Hilbert problem ( RHP) related to BD.I- type symmetric spaces SO(2 r + 1)/ S( O(2 r - 2 s+1) ⊗ O(2 s)), s ≥ 1. We consider two RHPs: the first is formulated on the real axis R in the complex-λ plane; the second, on R ⊗ iR. The first RHP for s = 1 allows solving the Kulish-Sklyanin (KS) model; the second RHP is related to a new type of KS model. We consider an important example of nontrivial deep reductions of the KS model and show its effect on the scattering matrix. In particular, we obtain new two-component nonlinear Schrödinger equations. Finally, using the Wronski relations, we show that the inverse scattering method for KS models can be understood as generalized Fourier transforms. We thus find a way to characterize all the fundamental properties of KS models including the hierarchy of equations and the hierarchy of their Hamiltonian structures.

  1. Advancements of the Lightweight Integrated Solar Array and Transceiver (LISA-T) Small Spacecraft System

    Science.gov (United States)

    Lockett, Tiffany Russell; Martinez, Armando; Boyd, Darren; SanSouice, Michael; Farmer, Brandon; Schneider, Todd; Laue, Greg; Fabisinski, Leo; Johnson, Les; Carr, John A.

    2015-01-01

    This paper describes recent advancements of the Lightweight Integrated Solar Array and Transceiver (LISA-T) currently being developed at NASA's Marshall Space Flight Center. The LISA-T array comprises a launch stowed, orbit deployed structure on which thin-film photovoltaic (PV) and antenna devices are embedded. The system provides significant electrical power generation at low weights, high stowage efficiency, and without the need for solar tracking. Leveraging high-volume terrestrial-market PVs also gives the potential for lower array costs. LISA-T is addressing the power starvation epidemic currently seen by many small-scale satellites while also enabling the application of deployable antenna arrays. Herein, an overview of the system and its applications are presented alongside sub-system development progress and environmental testing plans.

  2. NUCare: Advancing research on technological integration for self-management in the aging population.

    Science.gov (United States)

    Lees, Kristin E; Guthrie, Barbara J; Henderson, Elizabeth L; Jimison, Holly B; Sceppa, Carmen; Pavel, Misha; Gordon, Christine; Fulmer, Terry

    2017-11-15

    The Center for Technology in Support of Self-Management and Health (NUCare) is an exploratory research center funded by the National Institute of Nursing Research's P20 mechanism positioned to conduct rigorous research on the integration of technology in the self-management of the older adult population. The purpose of this paper is to describe the development and application of an evaluation plan and preliminary evaluation results from the first year of implementation. This evaluation plan is derived from and is consistent with Dorsey et al.'s (2014) logic model. Dorsey's model provided guidelines for evaluating sustainability, leveraging of resources, and interdisciplinary collaboration within the center. Preliminary results and strategies for addressing findings from the first year of evaluation are discussed. A secondary aim of this paper is to showcase the relevance of this center to the advancement and maintenance of health in the aging population. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Technology readiness assessment of advanced space engine integrated controls and health monitoring

    Science.gov (United States)

    Millis, Marc G.

    1991-01-01

    An evaluation is given for an integrated control and health-monitoring (ICHM) system that is designed to be used with hydrogen-oxygen rocket engines. The minimum required ICHM functions, system elements, technology readiness, and system cost are assessed for a system which permits the operation of H-O engines that are space-based, reusable, and descent-throttleable. Only the advanced sensors and some engine-dependent software are not found to be ready for applications to laboratory demonstration. Other systems related to the minimum functions are more developed, bringing the total system readiness to the conceptual design stage. Based on the evaluation of the H-O ICHM, it is estimated that the minimum system requirements for demonstration on an engine system testbed will require an investment of 30-45 million dollars over 6 years.

  4. BALANCED SCORECARD AS AN ADVANCED MANAGEMENT CONCEPT WITHIN THE INTEGRATED QUALITY MANAGEMENT MODEL

    Directory of Open Access Journals (Sweden)

    Stevan Zivojinovic

    2008-03-01

    Full Text Available The significance of >Integratedquality management< (IQM model, originating form St.Gallen-model, is reflected in the need for synergic application of new and advanced concepts of management theory and practise. Balanced score card (BSC within IQM model becomes a catalyst of business success for a modern organization by focusing on organizational variables-business strategy, organization structure and corporate culture. BSC is the leading system of performance tracking and strategy implementation, consistent with other management concepts and methods for managing process improvement. Through BSC, IQM processes' activities correlate with organization business results. BSC management processes enable integration of all decision-making levels, from institutional via strategic to operative, in the process starting from planing, i.e. formulating and implementation of strategy, to feed back by performance measurement and control.

  5. DEMONSTRATION OF AN ADVANCED INTEGRATED CONTROL SYSTEM FOR SIMULTANEOUS EMISSIONS REDUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Suzanne Shea; Randhir Sehgal; Ilga Celmins; Andrew Maxson

    2002-02-01

    The primary objective of the project titled ''Demonstration of an Advanced Integrated Control System for Simultaneous Emissions Reduction'' was to demonstrate at proof-of-concept scale the use of an online software package, the ''Plant Environmental and Cost Optimization System'' (PECOS), to optimize the operation of coal-fired power plants by economically controlling all emissions simultaneously. It combines physical models, neural networks, and fuzzy logic control to provide both optimal least-cost boiler setpoints to the boiler operators in the control room, as well as optimal coal blending recommendations designed to reduce fuel costs and fuel-related derates. The goal of the project was to demonstrate that use of PECOS would enable coal-fired power plants to make more economic use of U.S. coals while reducing emissions.

  6. INTEGRATING TECHNOLOGICAL ADVANCEMENTS IN BEHAVIORAL INTERVENTIONS TO PROMOTE HEALTH: UNPRECEDENTED OPORTUNITIES FOR BEHAVIOR ANALYSTS

    Science.gov (United States)

    KURTI, ALLISON N.; DALLERY, JESSE

    2015-01-01

    The use of mobile devices is growing worldwide in both industrialized and developing nations. Alongside the worldwide penetration of web-enabled devices, the leading causes of morbidity and mortality are increasingly modifiable lifestyle factors (e.g., improving one’s diet and exercising more). Behavior analysts have the opportunity to promote health by combining effective behavioral methods with technological advancements. The objectives of this paper are (1) to highlight the public health gains that may be achieved by integrating technology with a behavior analytic approach to developing interventions, and (2) to review some of the currently, under-examined issues related to merging technology and behavior analysis (enhancing sustainability, obtaining frequent measures of behavior, conducting component analyses, evaluating cost-effectiveness, incorporating behavior analysis in the creation of consumer-based applications, and reducing health disparities). Thorough consideration of these issues may inspire the development, implementation, and dissemination of innovative, efficacious interventions that substantially improve global public health. PMID:25774070

  7. An application of oscillation damped motion for suspended payloads to the advanced integrated maintenance system

    International Nuclear Information System (INIS)

    Noakes, M.W.; Petterson, B.J.; Werner, J.C.

    1990-01-01

    Transportation of objects using overhead cranes can induce pendulum motion of the object, which usually must be damped or allowed to decay before the next process can take place. Recent work at Sandia National Laboratories (SNL) has shown that oscillation damped transport and swing-free stops are possible by properly programming the acceleration of the transporting crane. This paper reviews the theory associated with oscillation-damped trajectories for simply suspended objects and describes a specific, full-scale implementation of the damped oscillation methods for the Oak Ridge National Laboratory (ORNL) Advanced Integrated Maintenance System (AIMS). Hardware and software requirements and constraints for proper operation are discussed. Finally, test results and lessons learned are presented. 5 refs., 4 figs

  8. Advanced modeling and simulation of integrated gasification combined cycle power plants with CO2-capture

    International Nuclear Information System (INIS)

    Rieger, Mathias

    2014-01-01

    The objective of this thesis is to provide an extensive description of the correlations in some of the most crucial sub-processes for hard coal fired IGCC with carbon capture (CC-IGCC). For this purpose, process simulation models are developed for four industrial gasification processes, the CO-shift cycle, the acid gas removal unit, the sulfur recovery process, the gas turbine, the water-/steam cycle and the air separation unit (ASU). Process simulations clarify the influence of certain boundary conditions on plant operation, performance and economics. Based on that, a comparative benchmark of CC-IGCC concepts is conducted. Furthermore, the influence of integration between the gas turbine and the ASU is analyzed in detail. The generated findings are used to develop an advanced plant configuration with improved economics. Nevertheless, IGCC power plants with carbon capture are not found to be an economically efficient power generation technology at present day boundary conditions.

  9. Weighted inequalities for fractional integral operators and linear commutators in the Morrey-type spaces.

    Science.gov (United States)

    Wang, Hua

    2017-01-01

    In this paper, we first introduce some new Morrey-type spaces containing generalized Morrey space and weighted Morrey space with two weights as special cases. Then we give the weighted strong type and weak type estimates for fractional integral operators [Formula: see text] in these new Morrey-type spaces. Furthermore, the weighted strong type estimate and endpoint estimate of linear commutators [Formula: see text] formed by b and [Formula: see text] are established. Also we study related problems about two-weight, weak type inequalities for [Formula: see text] and [Formula: see text] in the Morrey-type spaces and give partial results.

  10. Integrated safeguards testing laboratories in support of the advanced fuel cycle initiative

    Energy Technology Data Exchange (ETDEWEB)

    Santi, Peter A [Los Alamos National Laboratory; Demuth, Scott F [Los Alamos National Laboratory; Klasky, Kristen L [Los Alamos National Laboratory; Lee, Haeok [Los Alamos National Laboratory; Miller, Michael C [Los Alamos National Laboratory; Sprinkle, James K [Los Alamos National Laboratory; Tobin, Stephen J [Los Alamos National Laboratory; Williams, Bradley [DOE, NE

    2009-01-01

    A key enabler for advanced fuel cycle safeguards research and technology development for programs such as the Advanced Fuel Cycle Initiative (AFCI) is access to facilities and nuclear materials. This access is necessary in many cases in order to ensure that advanced safeguards techniques and technologies meet the measurement needs for which they were designed. One such crucial facility is a hot cell based laboratory which would allow developers from universities, national laboratories, and commercial companies to perform iterative research and development of advanced safeguards instrumentation under realistic operating conditions but not be subject to production schedule limitations. The need for such a facility arises from the requirement to accurately measure minor actinide and/or fission product bearing nuclear materials that cannot be adequately shielded in glove boxes. With the contraction of the DOE nuclear complex following the end of the cold war, many suitable facilities at DOE sites are increasingly costly to operate and are being evaluated for closure. A hot cell based laboratory that allowed developers to install and remove instrumentation from the hot cell would allow for both risk mitigation and performance optimization of the instrumentation prior to fielding equipment in facilities where maintenance and repair of the instrumentation is difficult or impossible. These benefits are accomplished by providing developers the opportunity to iterate between testing the performance of the instrumentation by measuring realistic types and amounts of nuclear material, and adjusting and refining the instrumentation based on the results of these measurements. In this paper, we review the requirements for such a facility using the Wing 9 hot cells in the Los Alamos National Laboratory's Chemistry and Metallurgy Research facility as a model for such a facility and describe recent use of these hot cells in support of AFCI.

  11. Advance care planning for adults with CKD: a systematic integrative review.

    Science.gov (United States)

    Luckett, Tim; Sellars, Marcus; Tieman, Jennifer; Pollock, Carol A; Silvester, William; Butow, Phyllis N; Detering, Karen M; Brennan, Frank; Clayton, Josephine M

    2014-05-01

    Recent clinical practice guidelines have highlighted the importance of advance care planning (ACP) for improving end-of-life care for people with chronic kidney disease (CKD). We conducted a systematic integrative review of the literature to inform future ACP practice and research in CKD, searching electronic databases in April 2013. Synthesis used narrative methods. We focused on adults with a primary diagnosis of CKD in any setting. We included studies of any design, quantitative or qualitative. ACP was defined as any formal means taken to ensure that health professionals and family members are aware of patients' wishes for care in the event they become too unwell to speak for themselves. Measures of all kinds were considered of interest. 55 articles met criteria reporting on 51 discrete samples. All patient samples included people with CKD stage 5; 2 also included patients with stage 4. Seven interventions were tested; all were narrowly focused and none was evaluated by comparing wishes for end-of-life care with care received. One intervention demonstrated effects on patient and family outcomes in the form of improved well-being and anxiety following sessions with a peer mentor. Insights from qualitative studies that have not been used to inform interventions include the importance of instilling patient confidence that their advance directives will be enacted and discussing decisions about (dis)continuing dialysis therapy separately from "aggressive" life-sustaining treatments (eg, ventilation). Although quantitative and qualitative findings were integrated according to best practice, methods for this are in their infancy. Research on ACP in patients with CKD is limited, especially intervention studies. Interventions in CKD should attend to barriers and facilitators at the levels of patient, caregiver, health professional, and system. Intervention studies should measure impact on compliance with patient wishes for end-of-life care. Copyright © 2014 National

  12. CAPE-OPEN Integration for Advanced Process Engineering Co-Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Zitney, S.E.

    2006-11-01

    This paper highlights the use of the CAPE-OPEN (CO) standard interfaces in the Advanced Process Engineering Co-Simulator (APECS) developed at the National Energy Technology Laboratory (NETL). The APECS system uses the CO unit operation, thermodynamic, and reaction interfaces to provide its plug-and-play co-simulation capabilities, including the integration of process simulation with computational fluid dynamics (CFD) simulation. APECS also relies heavily on the use of a CO COM/CORBA bridge for running process/CFD co-simulations on multiple operating systems. For process optimization in the face of multiple and some time conflicting objectives, APECS offers stochastic modeling and multi-objective optimization capabilities developed to comply with the CO software standard. At NETL, system analysts are applying APECS to a wide variety of advanced power generation systems, ranging from small fuel cell systems to commercial-scale power plants including the coal-fired, gasification-based FutureGen power and hydrogen production plant.

  13. Integrated Circuit Conception: A Wire Optimization Technic Reducing Interconnection Delay in Advanced Technology Nodes

    Directory of Open Access Journals (Sweden)

    Mohammed Darmi

    2017-10-01

    Full Text Available As we increasingly use advanced technology nodes to design integrated circuits (ICs, physical designers and electronic design automation (EDA providers are facing multiple challenges, firstly, to honor all physical constraints coming with cutting-edge technologies and, secondly, to achieve expected quality of results (QoR. An advanced technology should be able to bring better performances with minimum cost whatever the complexity. A high effort to develop out-of-the-box optimization techniques is more than needed. In this paper, we will introduce a new routing technique, with the objective to optimize timing, by only acting on routing topology, and without impacting the IC Area. In fact, the self-aligned double patterning (SADP technology offers an important difference on layer resistance between SADP and No-SADP layers; this property will be taken as an advantage to drive the global router to use No-SADP less resistive layers for critical nets. To prove the benefit on real test cases, we will use Mentor Graphics’ physical design EDA tool Nitro-SoC™ and several 7 nm technology node designs. The experiments show that worst negative slack (WNS and total negative slack (TNS improved up to 13% and 56%, respectively, compared to the baseline flow.

  14. Solvability of a quadratic integral equation of Fredholm type in Holder spaces

    OpenAIRE

    Josefa Caballero; Mohamed Abdalla Darwish; Kishin Sadarangani

    2014-01-01

    In this article, we prove the existence of solutions of a quadratic integral equation of Fredholm type with a modified argument, in the space of functions satisfying a Holder condition. Our main tool is the classical Schauder fixed point theorem.

  15. Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

    Science.gov (United States)

    1982-01-01

    The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

  16. On the Hadamard’s type inequalities for co-ordinated convex functions via fractional integrals

    Directory of Open Access Journals (Sweden)

    Abdullah Akkurt

    2017-07-01

    Full Text Available In this paper, we establish two identities for functions of two variables and apply them to give new Hermite–Hadamard type fractional integral inequalities for double fractional integrals involving functions whose derivatives are bounded or co-ordinates convex function on Δ≔[a,b]×[c,d] in R2 with a

  17. Some Results for Integral Inclusions of Volterra Type in Banach Spaces

    Directory of Open Access Journals (Sweden)

    Nieto JJ

    2010-01-01

    Full Text Available We first present several existence results and compactness of solutions set for the following Volterra type integral inclusions of the form: , where , is the infinitesimal generator of an integral resolvent family on a separable Banach space , and is a set-valued map. Then the Filippov's theorem and a Filippov-Ważewski result are proved.

  18. Improving safety through an integrated approach for advanced control room development

    International Nuclear Information System (INIS)

    Haugset, K.; Berg, O.; Bologna, S.; Foerdestroemmen, N.T.; Kvalem, J.; Nelson, W.R.; Yamane, N.

    1992-01-01

    With the fast development of computer technology, the potential exists for improving operational safety of nuclear plants by using advanced operator tools in the control room. Specific systems are being introduced, such as systems for alarm handling, failure detection, disturbance diagnosis, procedural advice and others, often based on process modeling techniques or expert system technology. To ensure a maximum benefit from the new technology, a careful integration of the various systems must, however, take place, resulting in a well coordinated interface between the operator and the process. The OECD Halden Reactor Project has started the development of an Integrated Surveillance And Control System (ISACS). The basis for the activity is the experience at Halden in developing specific Computerized Operator Support Systems (COSSs), and the activity around the experimental control room HAMMLAB where detailed validations of operator tools have been performed for a number of years. The first goal in the ISACS project is to have a first, limited prototype in operation at the end of 1990. Validation experiments will follow. (orig.)

  19. Improving safety through an integrated approach for advanced control room development

    International Nuclear Information System (INIS)

    Haugset, K.; Berg, O.; Foerdestroemmen, N.T.; Kvalem, J.; Nelson, W.R.

    1990-01-01

    With the fast development of computer technology, the potential exists for improving operational safety of nuclear plants by using advanced operator tools in the control room. Specific systems are being introduced, such as systems for alarm handling, failure detection, disturbance diagnosis, procedural advice and others, often based on process modeling techniques or expert system technology. To ensure a maximum benefit from the new technology, a careful integration of the various systems must, however, take place, resulting in a well coordinated interface between the operator and the process. The OECD Halden Reactor Project has started the development of an Integrated Surveillance And Control System (ISACS). The basis for the activity is the experience at Halden in developing specific Computerized Operator Support Systems (COSSs), and the activity around the experimental control room HAMMLAB where detailed validations of operator tools have been performed for a number of years. The first goal in the ISACS project is to have a first, limited prototype in operation at the end of 1990. Validation experiments will follow

  20. Recent advances in the integrated geophysical exploration of buried archaeological targets

    International Nuclear Information System (INIS)

    Pipan, M.

    2014-01-01

    We propose the integration of magnetic, electromagnetic (groundpenetrating radar, GPR) and seismic methods to study the inner structure of prehistoric funerary mounds. The combination of techniques allows high-resolution imaging and detection of buried targets and characterization of subsurface materials based on magnetic susceptibility, dielectric permittivity, conductivity and seismic velocity/attenuation. The 2012 archaeo-geophysical expedition to Scythian necropoleis in Kazakhstan allowed advancement of the integrated procedure through optimization of the individual techniques. We improve the results of seismic tomography inversion through an ART algorithm with a relaxation parameter which is progressively reduced during the iterative reconstruction process. We use instantaneous attributes and spectral decomposition to improve the interpretation of GPR reflection data. The results obtained from the 2012 dataset allow detailed reconstruction of the inner structure of three kurgans (i.e. funerary mounds) with maximum 7m central elevation. In particular, localized anomalies related to metallic targets smaller than the GPR and seismic resolution limits are identified from magnetic data after high pass filtering; GPR data allow imaging of inner stratigraphy up to a maximum depth of about 250 cm; seismic tomography maps large traveltime anomalies probably related to funerary chambers at the base of the mound.

  1. Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC).

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, Peter Andrew

    2011-12-01

    The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC) is to provide an integrated suite of computational modeling and simulation (M&S) capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. Achieving the objective of modeling the performance of a disposal scenario requires describing processes involved in waste form degradation and radionuclide release at the subcontinuum scale, beginning with mechanistic descriptions of chemical reactions and chemical kinetics at the atomic scale, and upscaling into effective, validated constitutive models for input to high-fidelity continuum scale codes for coupled multiphysics simulations of release and transport. Verification and validation (V&V) is required throughout the system to establish evidence-based metrics for the level of confidence in M&S codes and capabilities, including at the subcontiunuum scale and the constitutive models they inform or generate. This Report outlines the nature of the V&V challenge at the subcontinuum scale, an approach to incorporate V&V concepts into subcontinuum scale modeling and simulation (M&S), and a plan to incrementally incorporate effective V&V into subcontinuum scale M&S destined for use in the NEAMS Waste IPSC work flow to meet requirements of quantitative confidence in the constitutive models informed by subcontinuum scale phenomena.

  2. An integrative review of self-efficacy measurement instruments in youth with type 1 diabetes.

    Science.gov (United States)

    Rasbach, Lisa; Jenkins, Carolyn; Laffel, Lori

    2015-02-01

    The purpose of this study is to assess the extant literature on instruments used to measure self-efficacy in youth with type 1 diabetes (T1DM) and their caregivers and to critically evaluate these measurements. An integrative review (2003-2013) was conducted searching PsycINFO, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and US National Library of Medicine PubMed service (PubMed) databases using key words diabetes, type 1 diabetes, and self-efficacy. The authors reviewed the resulting 294 references for inclusion criteria of (a) sample of youth with T1DM or sample of caregivers of youth with T1DM, (b) description of the self-efficacy instrument as primary research, and (c) the instrument measured self-efficacy specifically related to diabetes management. Forty-five articles out of the initial 294 met criteria. Of the 45 articles, 10 different self-efficacy instruments were identified. The primary theoretical framework used was Bandura's social cognitive theory and model of self-efficacy. Most participants were white middle-class T1DM youth. Evaluations to assess validity often were not reported; however, a majority of studies reported high internal consistency of the instruments. Sample homogeneity could limit the applicability of results to certain patient populations. Further psychometric analysis, including validity assessments, should be conducted in more diverse samples. Development of valid and reliable instruments for measuring self-efficacy that are sensitive to change across a wider caregiver base over time is necessary. While this review examined reliable and valid instruments used in research, future opportunities include evaluation of measuring self-efficacy in T1DM youth exposed to recent advances in diabetes management technologies. © 2014 The Author(s).

  3. Application of advanced non-destructive testing for testing the integrity of concrete foundations

    International Nuclear Information System (INIS)

    Nguyen Le Son; Nguyen Phuoc Lan; Pham The Hung; Vu Huy Thuc

    2004-01-01

    computer from the cross-hole sonic logging data by prepared software fit the expected range of Ultrasonic Pulse Velocity results from the laboratory tests and can improve the reliability of interpreted quality. The acquired capabilities are valuable asset to apply the Cross-hole sonic method - advanced non-destructive testing (NDT) technique for testing the integrity of the deep concrete foundations. (author)

  4. A Probabilistic Risk Analysis (PRA) of Human Space Missions for the Advanced Integration Matrix (AIM)

    Science.gov (United States)

    Jones, Harry W.; Dillon-Merrill, Robin L.; Thomas, Gretchen A.

    2003-01-01

    The Advanced Integration Matrix (AIM) Project u7ill study and solve systems-level integration issues for exploration missions beyond Low Earth Orbit (LEO), through the design and development of a ground-based facility for developing revolutionary integrated systems for joint human-robotic missions. This paper describes a Probabilistic Risk Analysis (PRA) of human space missions that was developed to help define the direction and priorities for AIM. Risk analysis is required for all major NASA programs and has been used for shuttle, station, and Mars lander programs. It is a prescribed part of early planning and is necessary during concept definition, even before mission scenarios and system designs exist. PRA cm begin when little failure data are available, and be continually updated and refined as detail becomes available. PRA provides a basis for examining tradeoffs among safety, reliability, performance, and cost. The objective of AIM's PRA is to indicate how risk can be managed and future human space missions enabled by the AIM Project. Many critical events can cause injuries and fatalities to the crew without causing loss of vehicle or mission. Some critical systems are beyond AIM's scope, such as propulsion and guidance. Many failure-causing events can be mitigated by conducting operational tests in AIM, such as testing equipment and evaluating operational procedures, especially in the areas of communications and computers, autonomous operations, life support, thermal design, EVA and rover activities, physiological factors including habitation, medical equipment, and food, and multifunctional tools and repairable systems. AIM is well suited to test and demonstrate the habitat, life support, crew operations, and human interface. Because these account for significant crew, systems performance, and science risks, AIM will help reduce mission risk, and missions beyond LEO are far enough in the future that AIM can have significant impact.

  5. Analysis of design characteristics of a V-type support using an advanced engineering environment

    Science.gov (United States)

    Gwiazda, A.; Banaś, W.; Sękala, A.; Cwikla, G.; Topolska, S.; Foit, K.; Monica, Z.

    2017-08-01

    Modern mining support, for the entire period of their use, is the important part of the mining complex, which includes all the devices in the excavation during his normal use. Therefore, during the design of the support, it is an important task to choose the shape and to select the dimensions of a support as well as its strength characteristics. According to the rules, the design process of a support must take into account, inter alia, the type and the dimensions of the expected means of transport, the number and size of pipelines, and the type of additional equipment used excavation area. The support design must ensure the functionality of the excavation process and job security, while maintaining the economic viability of the entire project. Among others it should ensure the selection of a support for specific natural conditions. It is also important to take into consideration the economic characteristics of the project. The article presents an algorithm of integrative approach and its formalized description in the form of integration the areas of different construction characteristics optimization of a V-type mining support. The paper includes the example of its application for developing the construction of this support. In the paper is also described the results of the characteristics analysis and changings that were introduced afterwards. The support models are prepared in the computer environment of the CAD class (Siemens NX PLM). Also the analyses were conducted in this design, graphical environment.

  6. Hermite-Hadamard type inequalities for the generalized k-fractional integral operators.

    Science.gov (United States)

    Set, Erhan; Choi, Junesang; Gözpinar, Abdurrahman

    2017-01-01

    We firstly give a modification of the known Hermite-Hadamard type inequalities for the generalized k-fractional integral operators of a function with respect to another function. We secondly establish several Hermite-Hadamard type inequalities for the generalized k-fractional integral operators of a function with respect to another function. The results presented here, being very general, are pointed out to be specialized to yield some known results. Relevant connections of the various results presented here with those involving relatively simple fractional integral operators are also indicated.

  7. Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of catalytic ultrasound oxidation and membrane bioreactor.

    Science.gov (United States)

    Jia, Shengyong; Han, Hongjun; Zhuang, Haifeng; Xu, Peng; Hou, Baolin

    2015-01-01

    Laboratorial scale experiments were conducted to investigate a novel system integrating catalytic ultrasound oxidation (CUO) with membrane bioreactor (CUO-MBR) on advanced treatment of biologically pretreated coal gasification wastewater. Results indicated that CUO with catalyst of FeOx/SBAC (sewage sludge based activated carbon (SBAC) which loaded Fe oxides) represented high efficiencies in eliminating TOC as well as improving the biodegradability. The integrated CUO-MBR system with low energy intensity and high frequency was more effective in eliminating COD, BOD5, TOC and reducing transmembrane pressure than either conventional MBR or ultrasound oxidation integrated MBR. The enhanced hydroxyl radical oxidation, facilitation of substrate diffusion and improvement of cell enzyme secretion were the mechanisms for CUO-MBR performance. Therefore, the integrated CUO-MBR was the promising technology for advanced treatment in engineering applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. TCLP: an online cancer cell line catalogue integrating HLA type, predicted neo-epitopes, virus and gene expression.

    Science.gov (United States)

    Scholtalbers, Jelle; Boegel, Sebastian; Bukur, Thomas; Byl, Marius; Goerges, Sebastian; Sorn, Patrick; Loewer, Martin; Sahin, Ugur; Castle, John C

    2015-11-20

    Human cancer cell lines are an important resource for research and drug development. However, the available annotations of cell lines are sparse, incomplete, and distributed in multiple repositories. Re-analyzing publicly available raw RNA-Seq data, we determined the human leukocyte antigen (HLA) type and abundance, identified expressed viruses and calculated gene expression of 1,082 cancer cell lines. Using the determined HLA types, public databases of cell line mutations, and existing HLA binding prediction algorithms, we predicted antigenic mutations in each cell line. We integrated the results into a comprehensive knowledgebase. Using the Django web framework, we provide an interactive user interface with advanced search capabilities to find and explore cell lines and an application programming interface to extract cell line information. The portal is available at http://celllines.tron-mainz.de.

  9. Integral type operators from normal weighted Bloch spaces to QT,S spaces

    Directory of Open Access Journals (Sweden)

    Yongyi GU

    2016-08-01

    Full Text Available Operator theory is an important research content of the analytic function space theory. The discussion of simultaneous operator and function space is an effective way to study operator and function space. Assuming that  is an analytic self map on the unit disk Δ, and the normal weighted bloch space μ-B is a Banach space on the unit disk Δ, defining a composition operator C∶C(f=f on μ-B for all f∈μ-B, integral type operator JhC and CJh are generalized by integral operator and composition operator. The boundeness and compactness of the integral type operator JhC acting from normal weighted Bloch spaces to QT,S spaces are discussed, as well as the boundeness of the integral type operators CJh acting from normal weighted Bloch spaces to QT,S spaces. The related sufficient and necessary conditions are given.

  10. Role of Third Party Logistics Providers with Advanced it to Increase Customer Satisfaction in Supply Chain Integration

    OpenAIRE

    Zaryab Sheikh; Shafaq Rana

    2012-01-01

    The main area of change in organizational strategy is the extensive use of third party logistics providers who are using advanced information technology tools and integration of supply chain to enhance customer satisfaction. By outsourcing the logistics operations, companies can focus on their core competencies and other important areas of organization which can’t be outsourced. The analysis of this paper is conducted by discussing different concepts of supply chain integration, customer sati...

  11. ADVANCING THE STUDY OF VIOLENCE AGAINST WOMEN USING MIXED METHODS: INTEGRATING QUALITATIVE METHODS INTO A QUANTITATIVE RESEARCH PROGRAM

    Science.gov (United States)

    Testa, Maria; Livingston, Jennifer A.; VanZile-Tamsen, Carol

    2011-01-01

    A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women’s sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided. PMID:21307032

  12. On Quadratic Integral Equations of Urysohn Type in Fréchet Spaces

    OpenAIRE

    M. A. Darwish; M Benchohra

    2010-01-01

    In this paper, we investigate the existence of a unique solution on a semiinfinite interval for a quadratic integral equation of Urysohn type in Fréchet spaces using a nonlinear alternative of Leray-Schauder type for contractive maps.

  13. The Analytical Evaluation Of Three-Center Magnetic Multipole Moment Integrals By Using Slater Type Orbitals

    International Nuclear Information System (INIS)

    Oztekin, E.

    2010-01-01

    In this study, magnetic multipole moment integrals are calculated by using Slater type orbitals (STOs), Fourier transform and translation formulas. Firstly, multipole moment operators which appear in the three-center magnetic multipole moment integrals are translated to b-center from 0-center. So, three-center magnetic multipole moment integrals have been reduced to the two-center. Then, the obtained analytical expressions have been written in terms of overlap integrals. When the magnetic multipole moment integrals calculated, matrix representations for x-, y- and z-components of multipole moments was composed and every component was separately calculated to analytically. Consequently, magnetic multipole moment integrals are also given in terms of the same and different screening parameters.

  14. Hospital strategic planning diversity integration based organizational type and CEO tenure.

    Science.gov (United States)

    Newhouse, John J

    2007-01-01

    The author investigated the strategic planning processes used by five different hospital types to integrate diversity practices into their operations. Chief executive officers from Delaware, New Jersey, New York, and Pennsylvania were surveyed to examine how their hospitals used strategic planning in this process. The central research question was: Does this process vary on the basis of hospital type? The findings indicated that some differences do exist by hospital type, as well as the length of tenure for CEOs in their positions.

  15. Integration of molecular typing results into tuberculosis surveillance in Germany—A pilot study

    Science.gov (United States)

    Fiebig, Lena; Priwitzer, Martin; Richter, Elvira; Rüsch-Gerdes, Sabine; Haas, Walter; Niemann, Stefan; Brodhun, Bonita

    2017-01-01

    An integrated molecular surveillance for tuberculosis (TB) improves the understanding of ongoing TB transmission by combining molecular typing and epidemiological data. However, the implementation of an integrated molecular surveillance for TB is complex and requires thoughtful consideration of feasibility, demand, public health benefits and legal issues. We aimed to pilot the integration of molecular typing results between 2008 and 2010 in the German Federal State of Baden-Württemberg (population 10.88 Million) as preparation for a nationwide implementation. Culture positive TB cases were typed by IS6110 DNA fingerprinting and results were integrated into routine notification data. Demographic and clinical characteristics of cases and clusters were described and new epidemiological links detected after integrating typing data were calculated. Furthermore, a cross-sectional survey was performed among local public health offices to evaluate their perception and experiences. Overall, typing results were available for 83% of notified culture positive TB cases, out of which 25% were clustered. Age molecular typing information allowed the identification of previously unknown epidemiological links in 11% of the clusters. In 59% of the clusters it was not possible to identify any epidemiological link. Clusters extending over different counties were less likely to have epidemiological links identified among their cases (OR = 11.53, 95% CI: 3.48–98.23). The majority of local public health offices found molecular typing useful for their work. Our study illustrates the feasibility of integrating typing data into the German TB notification system and depicts its added public health value as complementary strategy in TB surveillance, especially to uncover transmission events among geographically separated TB patients. It also emphasizes that special efforts are required to strengthen the communication between local public health offices in different counties to enhance TB

  16. Integration of molecular typing results into tuberculosis surveillance in Germany-A pilot study.

    Science.gov (United States)

    Andrés, Marta; Göhring-Zwacka, Elke; Fiebig, Lena; Priwitzer, Martin; Richter, Elvira; Rüsch-Gerdes, Sabine; Haas, Walter; Niemann, Stefan; Brodhun, Bonita

    2017-01-01

    An integrated molecular surveillance for tuberculosis (TB) improves the understanding of ongoing TB transmission by combining molecular typing and epidemiological data. However, the implementation of an integrated molecular surveillance for TB is complex and requires thoughtful consideration of feasibility, demand, public health benefits and legal issues. We aimed to pilot the integration of molecular typing results between 2008 and 2010 in the German Federal State of Baden-Württemberg (population 10.88 Million) as preparation for a nationwide implementation. Culture positive TB cases were typed by IS6110 DNA fingerprinting and results were integrated into routine notification data. Demographic and clinical characteristics of cases and clusters were described and new epidemiological links detected after integrating typing data were calculated. Furthermore, a cross-sectional survey was performed among local public health offices to evaluate their perception and experiences. Overall, typing results were available for 83% of notified culture positive TB cases, out of which 25% were clustered. Age molecular typing information allowed the identification of previously unknown epidemiological links in 11% of the clusters. In 59% of the clusters it was not possible to identify any epidemiological link. Clusters extending over different counties were less likely to have epidemiological links identified among their cases (OR = 11.53, 95% CI: 3.48-98.23). The majority of local public health offices found molecular typing useful for their work. Our study illustrates the feasibility of integrating typing data into the German TB notification system and depicts its added public health value as complementary strategy in TB surveillance, especially to uncover transmission events among geographically separated TB patients. It also emphasizes that special efforts are required to strengthen the communication between local public health offices in different counties to enhance TB

  17. Advancing flood risk analysis by integrating adaptive behaviour in large-scale flood risk assessments

    Science.gov (United States)

    Haer, T.; Botzen, W.; Aerts, J.

    2016-12-01

    In the last four decades the global population living in the 1/100 year-flood zone has doubled from approximately 500 million to a little less than 1 billion people. Urbanization in low lying -flood prone- cities further increases the exposed assets, such as buildings and infrastructure. Moreover, climate change will further exacerbate flood risk in the future. Accurate flood risk assessments are important to inform policy-makers and society on current- and future flood risk levels. However, these assessment suffer from a major flaw in the way they estimate flood vulnerability and adaptive behaviour of individuals and governments. Current flood risk projections commonly assume that either vulnerability remains constant, or try to mimic vulnerability through incorporating an external scenario. Such a static approach leads to a misrepresentation of future flood risk, as humans respond adaptively to flood events, flood risk communication, and incentives to reduce risk. In our study, we integrate adaptive behaviour in a large-scale European flood risk framework through an agent-based modelling approach. This allows for the inclusion of heterogeneous agents, which dynamically respond to each other and a changing environment. We integrate state-of-the-art flood risk maps based on climate scenarios (RCP's), and socio-economic scenarios (SSP's), with government and household agents, which behave autonomously based on (micro-)economic behaviour rules. We show for the first time that excluding adaptive behaviour leads to a major misrepresentation of future flood risk. The methodology is applied to flood risk, but has similar implications for other research in the field of natural hazards. While more research is needed, this multi-disciplinary study advances our understanding of how future flood risk will develop.

  18. Integrated Computational Materials Engineering Development of Advanced High Strength Steel for Lightweight Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Hector, Jr., Louis G. [General Motors, Warren, MI (United States); McCarty, Eric D. [United States Automotive Materials Partnership LLC (USAMP), Southfield, MI (United States)

    2017-07-31

    The goal of the ICME 3GAHSS project was to successfully demonstrate the applicability of Integrated Computational Materials Engineering (ICME) for the development and deployment of third generation advanced high strength steels (3GAHSS) for immediate weight reduction in passenger vehicles. The ICME approach integrated results from well-established computational and experimental methodologies to develop a suite of material constitutive models (deformation and failure), manufacturing process and performance simulation modules, a properties database, as well as the computational environment linking them together for both performance prediction and material optimization. This is the Final Report for the ICME 3GAHSS project, which achieved the fol-lowing objectives: 1) Developed a 3GAHSS ICME model, which includes atomistic, crystal plasticity, state variable and forming models. The 3GAHSS model was implemented in commercially available LS-DYNA and a user guide was developed to facilitate use of the model. 2) Developed and produced two 3GAHSS alloys using two different chemistries and manufacturing processes, for use in calibrating and validating the 3GAHSS ICME Model. 3) Optimized the design of an automotive subassembly by substituting 3GAHSS for AHSS yielding a design that met or exceeded all baseline performance requirements with a 30% mass savings. A technical cost model was also developed to estimate the cost per pound of weight saved when substituting 3GAHSS for AHSS. The project demonstrated the potential for 3GAHSS to achieve up to 30% weight savings in an automotive structure at a cost penalty of up to $0.32 to $1.26 per pound of weight saved. The 3GAHSS ICME Model enables the user to design 3GAHSS to desired mechanical properties in terms of strength and ductility.

  19. Monitoring Structural Health of Different Types of Bridges Using Advanced Multi-Temporal InSAR

    Science.gov (United States)

    Qin, Xiaoqiong; Liao, Mingsheng; Yang, Mengshi; Zhang, Lu; Balz, Timo

    2016-08-01

    Since the bridges paly a significance role in national economic development and transportation safety, the structure health and safety of bridges aroused a lot of concern in society and become a hotspot research in earth observation and civil engineering. However, the materials degradation and environmental stresses increase may destroy the structure of bridges and pose significant risks to public safety and quality of life. This highlighted the importance of developing effective structure health monitoring strategies to reflect the current status of bridges and identify structural problems. In this work, an advanced multi-temporal InSAR technique is introduced into deformation monitoring of bridges. We focus on analysis the distribution of PSs, distinction of stable and unstable parts and recognition temporal-spatial deformation characteristics at the scale of single bridge through the examples of different types of bridges in Tianjin and Shanghai.

  20. Optimizing the regimes of the Advanced LIGO gravitational wave detector for multiple source types

    International Nuclear Information System (INIS)

    Kondrashov, I. S.; Simakov, D. A.; Khalili, F. Ya.; Danilishin, S. L.

    2008-01-01

    We developed algorithms which allow us to find regimes of the signal-recycled Fabry-Perot-Michelson interferometer [for example, the Advanced Laser Interferometric Gravitational Wave Observatory (LIGO)], optimized concurrently for two (binary inspirals + bursts) and three (binary inspirals + bursts + millisecond pulsars) types of gravitational wave sources. We show that there exists a relatively large area in the interferometer parameters space where the detector sensitivity to the first two kinds of sources differs only by a few percent from the maximal ones for each kind of source. In particular, there exists a specific regime where this difference is ≅0.5% for both of them. Furthermore, we show that even more multipurpose regimes are also possible that provide significant sensitivity gain for millisecond pulsars with only minor sensitivity degradation for binary inspirals and bursts.

  1. An integrated palliative and respiratory care for patients with advanced disease and refractory breathlessness: a randomised controlled trial

    NARCIS (Netherlands)

    Higginson, I.J.; Bausewein, C.; Reilly, C.C.; Gao, W.; Gysels, M.; Dzingina, M.; McCrone, P.; Booth, S.; Jolley, C.J.; Moxham, J.

    2014-01-01

    Background Breathlessness is a common and distressing symptom, which increases in many diseases as they progress and is difficult to manage. We assessed the effectiveness of early palliative care integrated with respiratory services for patients with advanced disease and refractory breathlessness.

  2. Integration of Technology, Curriculum, and Professional Development for Advancing Middle School Mathematics: Three Large-Scale Studies

    Science.gov (United States)

    Roschelle, Jeremy; Shechtman, Nicole; Tatar, Deborah; Hegedus, Stephen; Hopkins, Bill; Empson, Susan; Knudsen, Jennifer; Gallagher, Lawrence P.

    2010-01-01

    The authors present three studies (two randomized controlled experiments and one embedded quasi-experiment) designed to evaluate the impact of replacement units targeting student learning of advanced middle school mathematics. The studies evaluated the SimCalc approach, which integrates an interactive representational technology, paper curriculum,…

  3. Challenge problem and milestones for : Nuclear Energy Advanced Modeling and Simulation (NEAMS) waste Integrated Performance and Safety Codes (IPSC).

    Energy Technology Data Exchange (ETDEWEB)

    Freeze, Geoffrey A.; Wang, Yifeng; Howard, Robert; McNeish, Jerry A.; Schultz, Peter Andrew; Arguello, Jose Guadalupe, Jr.

    2010-09-01

    This report describes the specification of a challenge problem and associated challenge milestones for the Waste Integrated Performance and Safety Codes (IPSC) supporting the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. The NEAMS challenge problems are designed to demonstrate proof of concept and progress towards IPSC goals. The goal of the Waste IPSC is to develop an integrated suite of modeling and simulation capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive waste storage or disposal system. The Waste IPSC will provide this simulation capability (1) for a range of disposal concepts, waste form types, engineered repository designs, and geologic settings, (2) for a range of time scales and distances, (3) with appropriate consideration of the inherent uncertainties, and (4) in accordance with robust verification, validation, and software quality requirements. To demonstrate proof of concept and progress towards these goals and requirements, a Waste IPSC challenge problem is specified that includes coupled thermal-hydrologic-chemical-mechanical (THCM) processes that describe (1) the degradation of a borosilicate glass waste form and the corresponding mobilization of radionuclides (i.e., the processes that produce the radionuclide source term), (2) the associated near-field physical and chemical environment for waste emplacement within a salt formation, and (3) radionuclide transport in the near field (i.e., through the engineered components - waste form, waste package, and backfill - and the immediately adjacent salt). The initial details of a set of challenge milestones that collectively comprise the full challenge problem are also specified.

  4. Challenge problem and milestones for: Nuclear Energy Advanced Modeling and Simulation (NEAMS) waste Integrated Performance and Safety Codes (IPSC)

    International Nuclear Information System (INIS)

    Freeze, Geoffrey A.; Wang, Yifeng; Howard, Robert; McNeish, Jerry A.; Schultz, Peter Andrew; Arguello, Jose Guadalupe Jr.

    2010-01-01

    This report describes the specification of a challenge problem and associated challenge milestones for the Waste Integrated Performance and Safety Codes (IPSC) supporting the U.S. Department of Energy (DOE) Office of Nuclear Energy Advanced Modeling and Simulation (NEAMS) Campaign. The NEAMS challenge problems are designed to demonstrate proof of concept and progress towards IPSC goals. The goal of the Waste IPSC is to develop an integrated suite of modeling and simulation capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive waste storage or disposal system. The Waste IPSC will provide this simulation capability (1) for a range of disposal concepts, waste form types, engineered repository designs, and geologic settings, (2) for a range of time scales and distances, (3) with appropriate consideration of the inherent uncertainties, and (4) in accordance with robust verification, validation, and software quality requirements. To demonstrate proof of concept and progress towards these goals and requirements, a Waste IPSC challenge problem is specified that includes coupled thermal-hydrologic-chemical-mechanical (THCM) processes that describe (1) the degradation of a borosilicate glass waste form and the corresponding mobilization of radionuclides (i.e., the processes that produce the radionuclide source term), (2) the associated near-field physical and chemical environment for waste emplacement within a salt formation, and (3) radionuclide transport in the near field (i.e., through the engineered components - waste form, waste package, and backfill - and the immediately adjacent salt). The initial details of a set of challenge milestones that collectively comprise the full challenge problem are also specified.

  5. The Integrated Safety-Critical Advanced Avionics Communication and Control (ISAACC) System Concept: Infrastructure for ISHM

    Science.gov (United States)

    Gwaltney, David A.; Briscoe, Jeri M.

    2005-01-01

    Integrated System Health Management (ISHM) architectures for spacecraft will include hard real-time, critical subsystems and soft real-time monitoring subsystems. Interaction between these subsystems will be necessary and an architecture supporting multiple criticality levels will be required. Demonstration hardware for the Integrated Safety-Critical Advanced Avionics Communication & Control (ISAACC) system has been developed at NASA Marshall Space Flight Center. It is a modular system using a commercially available time-triggered protocol, ?Tp/C, that supports hard real-time distributed control systems independent of the data transmission medium. The protocol is implemented in hardware and provides guaranteed low-latency messaging with inherent fault-tolerance and fault-containment. Interoperability between modules and systems of modules using the TTP/C is guaranteed through definition of messages and the precise message schedule implemented by the master-less Time Division Multiple Access (TDMA) communications protocol. "Plug-and-play" capability for sensors and actuators provides automatically configurable modules supporting sensor recalibration and control algorithm re-tuning without software modification. Modular components of controlled physical system(s) critical to control algorithm tuning, such as pumps or valve components in an engine, can be replaced or upgraded as "plug and play" components without modification to the ISAACC module hardware or software. ISAACC modules can communicate with other vehicle subsystems through time-triggered protocols or other communications protocols implemented over Ethernet, MIL-STD- 1553 and RS-485/422. Other communication bus physical layers and protocols can be included as required. In this way, the ISAACC modules can be part of a system-of-systems in a vehicle with multi-tier subsystems of varying criticality. The goal of the ISAACC architecture development is control and monitoring of safety critical systems of a

  6. Advancing coastal ocean modelling, analysis, and prediction for the US Integrated Ocean Observing System

    Science.gov (United States)

    Wilkin, John L.; Rosenfeld, Leslie; Allen, Arthur; Baltes, Rebecca; Baptista, Antonio; He, Ruoying; Hogan, Patrick; Kurapov, Alexander; Mehra, Avichal; Quintrell, Josie; Schwab, David; Signell, Richard; Smith, Jane

    2017-01-01

    This paper outlines strategies that would advance coastal ocean modelling, analysis and prediction as a complement to the observing and data management activities of the coastal components of the US Integrated Ocean Observing System (IOOS®) and the Global Ocean Observing System (GOOS). The views presented are the consensus of a group of US-based researchers with a cross-section of coastal oceanography and ocean modelling expertise and community representation drawn from Regional and US Federal partners in IOOS. Priorities for research and development are suggested that would enhance the value of IOOS observations through model-based synthesis, deliver better model-based information products, and assist the design, evaluation, and operation of the observing system itself. The proposed priorities are: model coupling, data assimilation, nearshore processes, cyberinfrastructure and model skill assessment, modelling for observing system design, evaluation and operation, ensemble prediction, and fast predictors. Approaches are suggested to accomplish substantial progress in a 3–8-year timeframe. In addition, the group proposes steps to promote collaboration between research and operations groups in Regional Associations, US Federal Agencies, and the international ocean research community in general that would foster coordination on scientific and technical issues, and strengthen federal–academic partnerships benefiting IOOS stakeholders and end users.

  7. Integration of advanced oxidation processes at mild conditions in wet scrubbers for odourous sulphur compounds treatment.

    Science.gov (United States)

    Vega, Esther; Martin, Maria J; Gonzalez-Olmos, Rafael

    2014-08-01

    The effectiveness of different advanced oxidation processes on the treatment of a multicomponent aqueous solution containing ethyl mercaptan, dimethyl sulphide and dimethyl disulphide (0.5 mg L(-1) of each sulphur compound) was investigated with the objective to assess which one is the most suitable treatment to be coupled in wet scrubbers used in odour treatment facilities. UV/H2O2, Fenton, photo-Fenton and ozone treatments were tested at mild conditions and the oxidation efficiency obtained was compared. The oxidation tests were carried out in magnetically stirred cylindrical quartz reactors using the same molar concentration of oxidants (hydrogen peroxide or ozone). The results show that ozone and photo-Fenton are the most efficient treatments, achieving up to 95% of sulphur compounds oxidation and a mineralisation degree around 70% in 10 min. Furthermore, the total costs of the treatments taking into account the capital and operational costs were also estimated for a comparative purpose. The economic analysis revealed that the Fenton treatment is the most economical option to be integrated in a wet scrubber to remove volatile organic sulphur compounds, as long as there are no space constraints to install the required reactor volume. In the case of reactor volume limitation or retrofitting complexities, the ozone and photo-Fenton treatments should be considered as viable alternatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Recent advances in possible effects of bread types and enrichment on appetite during Ramadan fasting

    Directory of Open Access Journals (Sweden)

    Sara Movahed

    2017-07-01

    Full Text Available Introduction: Bread is the staple food of most Muslims and can be considered to be a component with a remarkable effect on satiety and appetite during Ramadan fasting. This study aimed to present the recent advances in investigating the effect of different types of bread and enrichments on satiety and appetite. Methods: In this paper, articles focusing on the effect of various bread types (including enriched bread on satiety and appetite, particularly during fasting were reviewed. Articles were found in databases such as ISI, PubMed and Google Scholar. Results: Different bread types with lower glycemic index are recommended for Ramadan fasting, especially for the Sahur meal, due to better satiety and sglycemic control. In addition, fermentable dietary fibers, such as arabinoxylans, β-glucan, fructans, and resistant starch, can influence appetite through fermentation in the colon by saccharolytic bacteria and gastrointestinal tract releasing hormones changes. Consumption of wholemeal bread results in the moderation of satiety and starvation. Barely, oat and rye breads demonstrate the better improvement of satiety compared to white wheat bread due to their higher fiber content, probiotic ingredients and steadier glycemia. On the other hand, use of protein-rich breads can result in delayed gastric emptying, steadier insulin levels and higher satiety. Beta-glucan enrichment shows similar significant results in terms of reducing hunger and increasing satiety by influencing the appetite and satiety and regulating hormones such as insulin, ghrelin and PYY. Fiber enrichment and probiotics (Fructo-oligosaccharides/Inulin could also be considered in this regard. Conclusion: During Ramadan fasting, barley bread, oat bread and wholegrain wheat bread could be suggested as the preferred bread types to be incorporated into the main meals to improve satiety and decrease hunger feeling.

  9. 3D Navigation and Integrated Hazard Display in Advanced Avionics: Workload, Performance, and Situation Awareness

    Science.gov (United States)

    Wickens, Christopher D.; Alexander, Amy L.

    2004-01-01

    We examined the ability for pilots to estimate traffic location in an Integrated Hazard Display, and how such estimations should be measured. Twelve pilots viewed static images of traffic scenarios and then estimated the outside world locations of queried traffic represented in one of three display types (2D coplanar, 3D exocentric, and split-screen) and in one of four conditions (display present/blank crossed with outside world present/blank). Overall, the 2D coplanar display best supported both vertical (compared to 3D) and lateral (compared to split-screen) traffic position estimation performance. Costs of the 3D display were associated with perceptual ambiguity. Costs of the split screen display were inferred to result from inappropriate attention allocation. Furthermore, although pilots were faster in estimating traffic locations when relying on memory, accuracy was greatest when the display was available.

  10. Ranking of integration factors within supply chains of forward and backward types - recommendations from researches

    Directory of Open Access Journals (Sweden)

    Bernd Hentschel

    2015-06-01

    Full Text Available Background: Integration trends are one of main determinants of the development of modern logistics. After the period of interest focused mainly on supply chains realizing one-way flows only, at present there is a time for supply chains characterized by two-way flows, realizing at the same time both forward and backward flows. The possibility of various configurations of such chains requires identification of integration factors and determination of their influence on the results of the whole supply chain. Experiences of the science as well as the practice of supply chains show the urgent need of learning of reasons of the integration within supply chains of the two-way type.  Material and methods: The researches on modeling and simulation of integration processes within supply chains of forward and backward type were carried out in the environment of iGrafx Process 2013 for Six Sigma. The empirical material obtained in these researches was put to the statistical analysis by the used of Minitab 17. The identification of the significance of differences was made with the help of analysis of variance ANOVA. Additionally the analysis of differences in form of absolute averages was made.  The following measures are main ones for the evaluation of the integration of a supply chain of forward and backward types: cashflow, profitability, service level.  Results: 8 192 simulation experiments were made for 6 integration factors: accessibility of recycled materials, production planning, stock management, integration of transport, unification of packing materials and optimization of the material flow. Based on the analysis of the significance and values of differences, the results of the influence of each integration factor on global results of supply chains of forward and backward type were obtained. They were used to prepare the ranking of integration factors. The main factors, forming the integration shape of two-way supply chains were: stock

  11. Integrated Multi-Team Decision Making Processes and Effectiveness and the Connecticut Center for Advanced Technology

    National Research Council Canada - National Science Library

    Mathieu, John

    2004-01-01

    .... This program established a three part implementation path: First, the Advanced Technology Center will focus on key issues in propulsion and advanced power systems as well as take a leadership role in Next Generation Manufacturing technology...

  12. [Advances in molecular mechanisms of adaptive immunity mediated by type I-E CRISPR/Cas system--A review].

    Science.gov (United States)

    Sun, Dongchang; Qiu, Juanping

    2016-01-04

    To better adapt to the environment, prokaryocyte can take up exogenous genes (from bacteriophages, plasmids or genomes of other species) through horizontal gene transfer. Accompanied by the acquisition of exogenous genes, prokaryocyte is challenged by the invasion of 'selfish genes'. Therefore, to protect against the risk of gene transfer, prokaryocyte needs to establish mechanisms for selectively taking up or degrading exogenous DNA. In recent years, researchers discovered an adaptive immunity, which is mediated by the small RNA guided DNA degradation, prevents the invasion of exogenous genes in prokaryocyte. During the immune process, partial DNA fragments are firstly integrated.to the clustered regularly interspaced short palindromic repeats (CRISPR) located within the genome DNA, and then the mature CRISPR RNA transcript and the CRISPR associated proteins (Cas) form a complex CRISPR/Cas for degrading exogenous DNA. In this review, we will first briefly describe the CRISPR/Cas systems and then mainly focus on the recent advances of the function mechanism and the regulation mechanism of the type I-E CRISPR/Cas system in Escherichia coli.

  13. Hölder and Minkowski type inequalities for pseudo-integral

    Czech Academy of Sciences Publication Activity Database

    Agahi, H.; Ouyang, Y.; Mesiar, Radko; Pap, E.; Štrbojaf, M.

    2011-01-01

    Roč. 217, č. 21 (2011), s. 8630-8639 ISSN 0096-3003 R&D Projects: GA ČR GA402/08/0618 Institutional research plan: CEZ:AV0Z10750506 Keywords : Hölder’s inequality * Minkowski’s inequality * Pseudo- integral * Semiring Subject RIV: BA - General Mathematics Impact factor: 1.317, year: 2011 http://library.utia.cas.cz/separaty/2011/E/mesiar-holder and minkowski type inequalities for pseudo- integral .pdf

  14. Open-Source Integrated Design-Analysis Environment For Nuclear Energy Advanced Modeling & Simulation Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    O' Leary, Patrick [Kitware, Inc., Clifton Park, NY (United States)

    2017-01-30

    The framework created through the Open-Source Integrated Design-Analysis Environment (IDAE) for Nuclear Energy Advanced Modeling & Simulation grant has simplify and democratize advanced modeling and simulation in the nuclear energy industry that works on a range of nuclear engineering applications. It leverages millions of investment dollars from the Department of Energy's Office of Nuclear Energy for modeling and simulation of light water reactors and the Office of Nuclear Energy's research and development. The IDEA framework enhanced Kitware’s Computational Model Builder (CMB) while leveraging existing open-source toolkits and creating a graphical end-to-end umbrella guiding end-users and developers through the nuclear energy advanced modeling and simulation lifecycle. In addition, the work deliver strategic advancements in meshing and visualization for ensembles.

  15. Fixed point theorems for mappings satisfying contractive conditions of integral type and applications

    Directory of Open Access Journals (Sweden)

    Kang Shin

    2011-01-01

    Full Text Available Abstract In this paper, the existence, uniqueness and iterative approximations of fixed points for contractive mappings of integral type in complete metric spaces are established. As applications, the existence, uniqueness and iterative approximations of solutions for a class of functional equations arising in dynamic programming are discussed. The results presented in this paper extend and improve essentially the results of Branciari (A fixed point theorem for mappings satisfying a general contractive condition of integral type. Int. J. Math. Math. Sci. 29, 531-536, 2002, Kannan (Some results on fixed points. Bull. Calcutta Math. Soc. 60, 71-76, 1968 and several known results. Four concrete examples involving the contractive mappings of integral type with uncountably many points are constructed. 2010 Mathematics Subject Classfication: 54H25, 47H10, 49L20, 49L99, 90C39

  16. Receptor for advanced glycation end-products is a marker of type I lung alveolar cells.

    Science.gov (United States)

    Shirasawa, Madoka; Fujiwara, Naoyuki; Hirabayashi, Susumu; Ohno, Hideki; Iida, Junko; Makita, Koshi; Hata, Yutaka

    2004-02-01

    Lung alveolar epithelial cells are comprised of type I (ATI) and type II (ATII) cells. ATI cells are polarized, although they have very flat morphology. The identification of marker proteins for apical and basolateral membranes of ATI cells is important to investigate into the differentiation of ATI cells. In this paper, we characterized receptor for advanced glycation end-products (RAGE) as a marker for ATI cells. RAGE was localized on basolateral membranes of ATI cells in the immunoelectron microscopy and its expression was enhanced in a parallel manner to the differentiation of ATI cells in vivo and in primary cultures of ATII cells. RAGE and T1 alpha, a well-known ATI marker protein, were targeted to basolateral and apical membranes, respectively, when expressed in polarized Madine Darby canine kidney cells. Moreover, RAGE was expressed in ATI cells after T1 alpha in vivo and in ex in vivo organ cultures. In conclusion, RAGE is a marker for basolateral membranes of well-differentiated ATI cells. ATI cells require some signal provided by the in vivo environment to express RAGE.

  17. A note on the prolongation structure of the cubically nonlinear integrable Camassa-Holm type equation

    Energy Technology Data Exchange (ETDEWEB)

    Stalin, S. [Centre for Nonlinear Dynamics, School of Physics, Bharathidasan University, Tiruchirappalli 620024, Tamil Nadu (India); Senthilvelan, M., E-mail: velan@cnld.bdu.ac.in [Centre for Nonlinear Dynamics, School of Physics, Bharathidasan University, Tiruchirappalli 620024, Tamil Nadu (India)

    2011-10-17

    In this Letter, we formulate an exterior differential system for the newly discovered cubically nonlinear integrable Camassa-Holm type equation. From the exterior differential system we establish the integrability of this equation. We then study Cartan prolongation structure of this equation. We also discuss the method of identifying conservation laws and Baecklund transformation for this equation from the identified exterior differential system. -- Highlights: → An exterior differential system for a cubic nonlinear integrable equation is given. → The conservation laws from the exterior differential system is derived. → The Baecklund transformation from the Cartan-Ehresmann connection is obtained.

  18. Weighted inequalities for fractional integral operators and linear commutators in the Morrey-type spaces

    Directory of Open Access Journals (Sweden)

    Hua Wang

    2017-01-01

    Full Text Available Abstract In this paper, we first introduce some new Morrey-type spaces containing generalized Morrey space and weighted Morrey space with two weights as special cases. Then we give the weighted strong type and weak type estimates for fractional integral operators I α $I_{\\alpha}$ in these new Morrey-type spaces. Furthermore, the weighted strong type estimate and endpoint estimate of linear commutators [ b , I α ] $[b,I_{\\alpha}]$ formed by b and I α $I_{\\alpha}$ are established. Also we study related problems about two-weight, weak type inequalities for I α $I_{\\alpha}$ and [ b , I α ] $[b,I_{\\alpha}]$ in the Morrey-type spaces and give partial results.

  19. Advanced BrainAGE in older adults with type 2 diabetes mellitus

    Directory of Open Access Journals (Sweden)

    Katja eFranke

    2013-12-01

    Full Text Available Aging alters brain structure and function and diabetes mellitus (DM may accelerate this process. This study investigated the effects of type 2 DM on individual brain aging as well as the relationships between individual brain aging, risk factors and functional measures. To differentiate a pattern of brain atrophy that deviates from normal brain aging, we used the novel BrainAGE approach, which determines the complex multidimensional aging pattern within the whole brain by applying established kernel regression methods to anatomical brain MRIs. The Brain Age Gap Estimation (i.e., BrainAGE score was then calculated as the difference between chronological age and estimated brain age. 185 subjects (98 with type 2 DM completed an MRI at 3T, laboratory and clinical assessments. Twenty-five subjects (12 with type 2 DM also completed a follow-up visit after 3.8 ± 1.5 years. The estimated brain age of DM subjects was 4.6 ± 7.2 years greater than their chronological age (p = 0.0001, whereas within the control group, estimated brain age was similar to chronological age. As compared to baseline, the average BrainAGE scores of DM subjects increased by 0.2 years per follow-up year (p = 0.034, whereas the BrainAGE scores of controls did not change between baseline and follow-up. At baseline, across all subjects, higher BrainAGE scores were associated with greater smoking and alcohol consumption, higher tumor necrosis factor (TNFα levels, lower verbal fluency scores and more severe depression. Within the DM group, higher BrainAGE scores were associated with longer diabetes duration (r = 0.31, p = 0.019 and increased fasting blood glucose levels (r = 0.34, p = 0.025. In conclusion, type 2 DM is independently associated with structural changes in the brain that reflect advanced aging. The BrainAGE approach may thus serve as a clinically relevant biomarker for the detection of abnormal patterns of brain aging associated with type 2 DM.

  20. Verification test of advanced LWR fuel components of Westinghouse type nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Yoon, Kyung Ho; Lee, Young Ho

    2004-08-01

    The purpose of this project is to independently conduct the performance test of the spacer grids and the cladding material of the 16x16 and 17x17 advanced fuels for Westinghouse type plants, and to improve the relevant test technology. Major works and results of the present research are as follows. 1. The design and structural features of the spacer grids were investigated, especially the finally determined I-spring was thoroughly analyzed in the point of the mechanical damage and characteristic. 2. As for the mechanical tests of the space grids, the characterization, the impact and the fretting wear tests were carried out. The block as well as the in-grid tests were conducted for the spring/dimple characterization, from which a simple method was developed that simulated the boundary conditions of the assembled grid straps. The impact tester was modified and improved to accommodate a full size grid assembly. The impact result showed that the grid assembly fulfilled the design criteria. As for the fretting wear tests, a sliding test under the room temperature air/water, a sliding/impact test under the room temperature air and a sliding/impact tests under the high temperature and pressure environments were carried out. To this end, a high temperature and pressure fretting wear tester was newly developed. The wear characteristic and the resistibility of the advanced grid spring/dimple were analyzed in detail. The test results were verified through comparing those with the test results by the Westinghouse company. 3. The properties and performance of the newly adopted material for the cladding, Low Sn Zirlo was investigated by a room and high temperature tensile tests and a corrosion tests under the environments of 360 .deg. C water, 400 steam and 360 .deg. C 70ppm LiOH. Through the present project, all the test equipment and technologies for the fuel components were procured, which will be used for future domestic development of a new fuel

  1. Integration of the advanced transparency framework to advanced nuclear systems : enhancing Safety, Operations, Security and Safeguards (SOSS)

    International Nuclear Information System (INIS)

    Mendez, Carmen Margarita; Rochau, Gary Eugene; Cleary, Virginia D.

    2008-01-01

    The advent of the nuclear renaissance gives rise to a concern for the effective design of nuclear fuel cycle systems that are safe, secure, nonproliferating and cost-effective. We propose to integrate the monitoring of the four major factors of nuclear facilities by focusing on the interactions between Safeguards, Operations, Security, and Safety (SOSS). We proposed to develop a framework that monitors process information continuously and can demonstrate the ability to enhance safety, operations, security, and safeguards by measuring and reducing relevant SOSS risks, thus ensuring the safe and legitimate use of the nuclear fuel cycle facility. A real-time comparison between expected and observed operations provides the foundation for the calculation of SOSS risk. The automation of new nuclear facilities requiring minimal manual operation provides an opportunity to utilize the abundance of process information for monitoring SOSS risk. A framework that monitors process information continuously can lead to greater transparency of nuclear fuel cycle activities and can demonstrate the ability to enhance the safety, operations, security and safeguards associated with the functioning of the nuclear fuel cycle facility. Sandia National Laboratories (SNL) has developed a risk algorithm for safeguards and is in the process of demonstrating the ability to monitor operational signals in real-time though a cooperative research project with the Japan Atomic Energy Agency (JAEA). The risk algorithms for safety, operations and security are under development. The next stage of this work will be to integrate the four algorithms into a single framework

  2. The integration of traditional and advanced design in the formation of sustainable New Rural Housing solutions.

    Science.gov (United States)

    Khai Tran, Van

    2018-04-01

    Socio-economic growth in Vietnam greatly depends on the new rural development process in this country; the work is considered a strategic position in national development. Thus, the study of the principles of the architectural design of new rural housing solutions in accordance with the New Rural Environment as required by the Vietnam Ministry of Construction has become urgent. Climate change has become a global concern, so the creation of significant impacts by architectural designs to respond to climate change and make the living environment of rural people better is a major demand. Experience has shown that the dogmatic application of current urban-type housing does not reach the requirements of New Rural Housing. This research intends to show that the solutions of the traditional Vietnamese rural house, which retains the advantages of traditional architecture with excellent characteristics that have been challenged over thousands of years, when combined with advanced design methodologies and technologies, will be the appropriate solution for ‘New Rural Housing’.

  3. Gas-phase advanced oxidation as an integrated air pollution control technique

    Directory of Open Access Journals (Sweden)

    Getachew A. Adnew

    2016-03-01

    Full Text Available Gas-phase advanced oxidation (GPAO is an emerging air cleaning technology based on the natural self-cleaning processes that occur in the Earth’s atmosphere. The technology uses ozone, UV-C lamps and water vapor to generate gas-phase hydroxyl radicals that initiate oxidation of a wide range of pollutants. In this study four types of GPAO systems are presented: a laboratory scale prototype, a shipping container prototype, a modular prototype, and commercial scale GPAO installations. The GPAO systems treat volatile organic compounds, reduced sulfur compounds, amines, ozone, nitrogen oxides, particles and odor. While the method covers a wide range of pollutants, effective treatment becomes difficult when temperature is outside the range of 0 to 80 °C, for anoxic gas streams and for pollution loads exceeding ca. 1000 ppm. Air residence time in the system and the rate of reaction of a given pollutant with hydroxyl radicals determine the removal efficiency of GPAO. For gas phase compounds and odors including VOCs (e.g. C6H6 and C3H8 and reduced sulfur compounds (e.g. H2S and CH3SH, removal efficiencies exceed 80%. The method is energy efficient relative to many established technologies and is applicable to pollutants emitted from diverse sources including food processing, foundries, water treatment, biofuel generation, and petrochemical industries.

  4. Advanced Differential Radar Interferometry (A-DInSAR) as integrative tool for a structural geological analysis

    Science.gov (United States)

    Crippa, B.; Calcagni, L.; Rossi, G.; Sternai, P.

    2009-04-01

    Advanced Differential SAR interferometry (A-DInSAR) is a technique monitoring large-coverage surface deformations using a stack of interferograms generated from several complex SLC SAR images, acquired over the same target area at different times. In this work are described the results of a procedure to calculate terrain motion velocity on highly correlated pixels (E. Biescas, M. Crosetto, M. Agudo, O. Monserrat e B. Crippa: Two Radar Interferometric Approaches to Monitor Slow and Fast Land Deformation, 2007) in two area Gemona - Friuli, Northern Italy, Pollino - Calabria, Southern Italy, and, furthermore, are presented some consideration, based on successful examples of the present analysis. The choice of these pixels whose displacement velocity is calculated depends on the dispersion index value (DA) or using coherence values along the stack interferograms. A-DInSAR technique allows to obtain highly reliable velocity values of the vertical displacement. These values concern the movement of minimum surfaces of about 80m2 at the maximum resolution and the minimum velocity that can be recognized is of the order of mm/y. Because of the high versatility of the technology, because of the large dimensions of the area that can be analyzed (of about 10000Km2) and because of the high precision and reliability of the results obtained, we think it is possible to exploit radar interferometry to obtain some important information about the structural context of the studied area, otherwise very difficult to recognize. Therefore we propose radar interferometry as a valid investigation tool whose results must be considered as an important integration of the data collected in fieldworks.

  5. Non-specific lipid transfer proteins in plants: presenting new advances and an integrated functional analysis.

    Science.gov (United States)

    Liu, Fang; Zhang, Xiaobo; Lu, Changming; Zeng, Xinhua; Li, Yunjing; Fu, Donghui; Wu, Gang

    2015-09-01

    Plant non-specific lipid-transfer proteins (nsLTPs) are small, basic proteins present in abundance in higher plants. They are involved in key processes of plant cytology, such as the stablization of membranes, cell wall organization, and signal transduction. nsLTPs are also known to play important roles in resistance to biotic and abiotic stress, and in plant growth and development, such as sexual reproduction, seed development and germination. The structures of plant nsLTPs contain an eight-cysteine residue conserved motif, linked by four disulfide bonds, and an internal hydrophobic cavity, which comprises the lipid-binding site. This structure endows stability and increases the ability to bind and/or carry hydrophobic molecules. There is growing interest in nsLTPs, due to their critical roles, resulting in the need for a comprehensive review of their form and function. Relevant topics include: nsLTP structure and biochemical features, their classification, identification, and characterization across species, sub-cellular localization, lipid binding and transfer ability, expression profiling, functionality, and evolution. We present advances, as well as limitations and trends, relating to the different topics of the nsLTP gene family. This review collates a large body of research pertaining to the role of nsLTPs across the plant kingdom, which has been integrated as an in depth functional analysis of this group of proteins as a whole, and their activities across multiple biochemical pathways, based on a large number of reports. This review will enhance our understanding of nsLTP activity in planta, prompting further work and insights into the roles of this multifaceted protein family in plants. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  6. Virtual Welded-Joint Design Integrating Advanced Materials and Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Z.; Dong, P.; Liu, S.; Babu, S.; Olson, G.; DebRoy, T.

    2005-04-15

    The primary goal of this project is to increase the fatigue life of a welded-joint by 10 times and to reduce energy use by 25% through product performance and productivity improvements using an integrated modeling approach. The fatigue strength of a welded-joint is currently the bottleneck to design high performance and lightweight welded structures using advanced materials such as high strength steels. In order to achieve high fatigue strength in a welded-joint it is necessary to manage the weld bead shape for lower stress concentration, produce preferable residual stress distribution, and obtain the desired microstructure for improved material toughness and strength. This is a systems challenge that requires the optimization of the welding process, the welding consumable, the base material, as well as the structure design. The concept of virtual welded-joint design has been proposed and established in this project. The goal of virtual welded-joint design is to develop a thorough procedure to predict the relationship of welding process, microstructure, property, residual stress, and the ultimate weld fatigue strength by a systematic modeling approach. The systematic approach combines five sub-models: weld thermal-fluid model, weld microstructure model, weld material property model, weld residual stress model, and weld fatigue model. The systematic approach is thus based on interdisciplinary applied sciences including heat transfer, computational fluid dynamics, materials science, engineering mechanics, and material fracture mechanics. The sub-models are based on existing models with further development. The results from modeling have been validated with critical experiments. The systematic modeling approach has been used to design high fatigue resistant welds considering the combined effects of weld bead geometry, residual stress, microstructure, and material property. In particular, a special welding wire has been developed in this project to introduce

  7. Modelling and simulation of the integration of the supply chain of forward and backward type

    Directory of Open Access Journals (Sweden)

    Roman Domański

    2015-03-01

    Full Text Available Background: The integration, besides synergy and convergence, is regarded as a leading orientation in modern logistics. The connection of various participants within supply chains enables the integration of actions and allows to fulfill growing customers' demands in an effective and economically efficient way.  In times of a concept of the balanced development, growing interest in utilization of recycled material, connected with possibilities to consolidate  logistic activities, can be observed. According to the scientific literature (integration models as well as practical business cases, supply chains of forward and backward type (two-directional are the area of logistics of the intensive development.    Material and methods: The paper presents the Authors' model and methodology of modeling of the integration of supply chains, which realizes the flows of forward and backward type (two-directions. The empirical material was obtained during modeling and simulation of processes in the environment of iGrafx Process 2013 for Six Sigma with the support of Minitab 17 (for planning of experiments.  The method of the verification of statistical hypotheses was used. As a first step, the correlation between the level of the integration and the global service level for the supply chain was conducted using the method of Pearson's coefficient. The test of relevance of correlation coefficient was conducted by the use of t-distribution method. Then the verification of statistical hypotheses was made, based on the method using the Z-statistics. Results: The obtained results indicate clearly the strong relationship between the level of the integration of a supply chain and the obtained service level (values of Pearson's correlation coefficient and results of t-test. The detailed statistical researches of authors indicate that the increased level of the integration leads to the increase of the average value of service level coefficient (results of Z

  8. Comparison of three small-break loss-of-coolant accident tests with different break locations using the system-integrated modular advanced reactor-integral test loop facility to estimate the safety of the smart design

    Directory of Open Access Journals (Sweden)

    Hwang Bae

    2017-08-01

    Full Text Available Three small-break loss-of-coolant accident (SBLOCA tests with safety injection pumps were carried out using the integral-effect test loop for SMART (System-integrated Modular Advanced ReacTor, i.e., the SMART-ITL facility. The types of break are a safety injection system line break, shutdown cooling system line break, and pressurizer safety valve line break. The thermal–hydraulic phenomena show a traditional behavior to decrease the temperature and pressure whereas the local phenomena are slightly different during the early stage of the transient after a break simulation. A safety injection using a high-pressure pump effectively cools down and recovers the inventory of a reactor coolant system. The global trends show reproducible results for an SBLOCA scenario with three different break locations. It was confirmed that the safety injection system is robustly safe enough to protect from a core uncovery.

  9. Comparison of three small-break loss-of-coolant accident tests with different break locations using the system-integrated modular advanced reactor-integral test loop facility to estimate the safety of the smart design

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Hwang; Ryu, Sung Uk; Yi, Sung Jae; Park, Hyun Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Dong Eok [Dept. of Precision Mechanical Engineering, Kyungpook National University, Sangju (Korea, Republic of)

    2017-08-15

    Three small-break loss-of-coolant accident (SBLOCA) tests with safety injection pumps were carried out using the integral-effect test loop for SMART (System-integrated Modular Advanced ReacTor), i.e., the SMART-ITL facility. The types of break are a safety injection system line break, shutdown cooling system line break, and pressurizer safety valve line break. The thermal–hydraulic phenomena show a traditional behavior to decrease the temperature and pressure whereas the local phenomena are slightly different during the early stage of the transient after a break simulation. A safety injection using a high-pressure pump effectively cools down and recovers the inventory of a reactor coolant system. The global trends show reproducible results for an SBLOCA scenario with three different break locations. It was confirmed that the safety injection system is robustly safe enough to protect from a core uncovery.

  10. Sandor Type Inequalities for Sugeno Integral with respect to General α,m,r-Convex Functions

    Directory of Open Access Journals (Sweden)

    Dong-Qing Li

    2015-01-01

    Full Text Available The concept for general α,m,r-convex functions, as a generalization of convex functions, is introduced. Then, Sandor type inequalities for the Sugeno integral based on this kind of function are established. Our work generalizes the previous results in the literature. Finally, some conclusions and problems for further investigations are given.

  11. Solvability of a quadratic integral equation of Fredholm type in Holder spaces

    Directory of Open Access Journals (Sweden)

    Josefa Caballero

    2014-01-01

    Full Text Available In this article, we prove the existence of solutions of a quadratic integral equation of Fredholm type with a modified argument, in the space of functions satisfying a Holder condition. Our main tool is the classical Schauder fixed point theorem.

  12. Effects of Various Types of Situps on Integrated MAP's of the Abdominal Musculature.

    Science.gov (United States)

    Noble, Larry

    The electrical activity of the abdominal muscles was tested during situps to determine the effect upon integrated muscle action potential (MAP). The following types of situps were used in testing 18 college males: (1) trunk curls; (2) AAHPER situp; (3) YMCA situp; (4) modified AAHPER situp; and (5) modified YMCA situp. All situps were performed…

  13. The role of advanced glycation end products in various types of neurodegenerative disease: a therapeutic approach.

    Science.gov (United States)

    Salahuddin, Parveen; Rabbani, Gulam; Khan, Rizwan Hasan

    2014-09-01

    Protein glycation is initiated by a nucleophilic addition reaction between the free amino group from a protein, lipid or nucleic acid and the carbonyl group of a reducing sugar. This reaction forms a reversible Schiff base, which rearranges over a period of days to produce ketoamine or Amadori products. The Amadori products undergo dehydration and rearrangements and develop a cross-link between adjacent proteins, giving rise to protein aggregation or advanced glycation end products (AGEs). A number of studies have shown that glycation induces the formation of the β-sheet structure in β-amyloid protein, α-synuclein, transthyretin (TTR), copper-zinc superoxide dismutase 1 (Cu, Zn-SOD-1), and prion protein. Aggregation of the β-sheet structure in each case creates fibrillar structures, respectively causing Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, familial amyloid polyneuropathy, and prion disease. It has been suggested that oligomeric species of glycated α-synuclein and prion are more toxic than fibrils. This review focuses on the pathway of AGE formation, the synthesis of different types of AGE, and the molecular mechanisms by which glycation causes various types of neurodegenerative disease. It discusses several new therapeutic approaches that have been applied to treat these devastating disorders, including the use of various synthetic and naturally occurring inhibitors. Modulation of the AGE-RAGE axis is now considered promising in the prevention of neurodegenerative diseases. Additionally, the review covers several defense enzymes and proteins in the human body that are important anti-glycating systems acting to prevent the development of neurodegenerative diseases.

  14. Retinal blood flow is increased in type 1 diabetes mellitus patients with advanced stages of retinopathy.

    Science.gov (United States)

    Nguyen, Hoang-Ton; van Duinkerken, Eelco; Verbraak, Frank D; Polak, Bettine C P; Ringens, Peter J; Diamant, Michaela; Moll, Annette C

    2016-05-26

    Diabetic retinopathy (DRP) is a common microvascular complication seen in patients with type 1 diabetes mellitus (T1DM). The effects of T1DM and concomitant (proliferative) DRP on retinal blood flow are currently unclear. Therefore, we measured retinal vascular blood flow in T1DM patients with and without DRP and non-diabetic controls. We further assessed the acute effects of panretinal photocoagulation on retinal microvascular bloodflow in eight patients with diabetes. Thirty-three T1DM patients with proliferative DRP, previously treated with panretinal photocoagulation (pDRP), 11 T1DM patients with untreated non-proliferative retinopathy (npDRP) and 32 T1DM patients without DRP (nDRP) were compared with 44 non-diabetic gender-matched controls. Using scanning laser Doppler flowmetry (HRF, Heidelberg) blood flow in the retinal microvasculature was measured temporal and nasal of the optic disc and averaged into one flow value per eye. The right eye was used as a default for further analyses. Eight patients with novel proliferative retinopathy (4 T1DM and 4 with type 2 diabetes) were measured before and several months after photocoagulation. Between-group differences in retinal blood flow were assessed using ANOVA corrected for multiple comparisons (Bonferroni). Retinal blood flow was higher in the treated pDRP compared with the nDRP group and controls (all P Bonferroni retinopathy, blood flow did not significantly change before and after panretinal photocoagulation (P > 0.05). Using regression analysis, no variables were found as predictors of retinal blood flow. In comparison with controls and nDRP patients, retinal blood flow significantly increased in the pDRP group, which previously underwent photocoagulation treatment, but not in the npDRP patients. These changes may be a consequence of a failing vascular autoregulation in advanced diabetic retinopathy.

  15. Advanced Therapy Medicinal Products in type I diabetes mellitus: technological and regulatory challenges

    Directory of Open Access Journals (Sweden)

    Camila Leal-Lopes

    2018-02-01

    Full Text Available Introduction: Type 1 Diabetes mellitus (T1DM is an autoimmune disorder which arises from the destruction of insulin-producing pancreatic β-cells. Currently, Brazil’s advanced therapy medicinal products (ATMP, developed for clinical research and therapeutic purposes, take place in the so-called Cellular Technology Centers (CTC, according to the Resolution nº. 9/2011 of the Collegiate Board of Directors (RDC, enacted by the National Health Surveillance Agency (Anvisa. Objective: This study was conducted with the main objective of describing and discussing the development of ATMP for T1DM treatment. Method: A qualitative research, narrative review and critical discussion of the literature were under taken. Results: ATMP promote new therapeutic approaches for Diabetes, holding great potential to restore the patients’ endogenous insulin secretion, improving their life quality, overcoming the chronic complications of Diabetes and reducing the socioeconomic burden. Nowadays, ATMP in T1DM comprise: a cell therapy; b gene therapy products; c tissue engineering and d ATMPassociated to biopharmaceutical products. Conclusions: Further research should contribute to stimulate public and private organizations to effectively act towards reducing the impact of Diabetes on individuals and the society as a whole. It is essential that Brazilian legislation closely follows the biotechnological developments, supporting the scientific progress and benefiting T1DM patients with modern and cutting-edge therapies.

  16. Advanced glycation endproducts in 35 types of seafood products consumed in eastern China

    Science.gov (United States)

    Wang, Jing; Li, Zhenxing; Pavase, Ramesh Tushar; Lin, Hong; Zou, Long; Wen, Jie; Lv, Liangtao

    2016-08-01

    Advanced glycation endproducts (AGEs) have been recognized as hazards in processed foods that can induce chronic diseases such as cardiovascular disease, diabetes, and diabetic nephropathy. In this study, we investigated the AGEs contents of 35 types of industrial seafood products that are consumed frequently in eastern China. Total fluorescent AGEs level and Nɛ-carboxymethyl-lysine (CML) content were evaluated by fluorescence spectrophotometry and gas chromatography-mass spectrometry (GC-MS), respectively. The level of total fluorescent AGEs in seafood samples ranged from 39.37 to 1178.3 AU, and was higher in canned and packaged instant aquatic products that were processed at high temperatures. The CML content in seafood samples ranged from 44.8 to 439.1 mg per kg dried sample, and was higher in roasted seafood samples. The total fluorescent AGEs and CML content increased when seafood underwent high-temperature processing, but did not show an obvious correlation. The present study suggested that commonly consumed seafood contains different levels of AGEs, and the seafood processed at high temperatures always displays a high level of either AGEs or CML.

  17. Differential-algebraic integrability analysis of the generalized Riemann type and Korteweg-de Vries hydrodynamical equations

    International Nuclear Information System (INIS)

    Prykarpatsky, Anatoliy K; Artemovych, Orest D; Popowicz, Ziemowit; Pavlov, Maxim V

    2010-01-01

    A differential-algebraic approach to studying the Lax-type integrability of the generalized Riemann-type hydrodynamic equations at N = 3, 4 is devised. The approach is also applied to studying the Lax-type integrability of the well-known Korteweg-de Vries dynamical system.

  18. Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of heterogeneous catalytic ozonation and biological process.

    Science.gov (United States)

    Zhuang, Haifeng; Han, Hongjun; Jia, Shengyong; Hou, Baolin; Zhao, Qian

    2014-08-01

    Advanced treatment of biologically pretreated coal gasification wastewater (CGW) was investigated employing heterogeneous catalytic ozonation integrated with anoxic moving bed biofilm reactor (ANMBBR) and biological aerated filter (BAF) process. The results indicated that catalytic ozonation with the prepared catalyst (i.e. MnOx/SBAC, sewage sludge was converted into sludge based activated carbon (SBAC) which loaded manganese oxides) significantly enhanced performance of pollutants removal by generated hydroxyl radicals. The effluent of catalytic ozonation process was more biodegradable and less toxic than that in ozonation alone. Meanwhile, ANMBBR-BAF showed efficient capacity of pollutants removal in treatment of the effluent of catalytic ozonation at a shorter reaction time, allowing the discharge limits to be met. Therefore, the integrated process with efficient, economical and sustainable advantages was suitable for advanced treatment of real biologically pretreated CGW. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Open-Source Integrated Design-Analysis Environment for Nuclear Energy Advanced Modeling & Simulation Phase I Final Report

    Energy Technology Data Exchange (ETDEWEB)

    O' Leary, Patrick [Kitware, Inc., Clifton Park, NY (United States)

    2014-03-18

    Our proposal described an approach for addressing the barriers of advanced modeling and simulation (M&S) adoption by the nuclear energy industry. This will be achieved by developing a state-of-the-art, open-source integrated design-analysis environment (IDAE) to work on a range of nuclear energy applications, while leveraging best-in-class software created through millions of investment dollars from the Department of Energy (DOE) Office for Nuclear Energy (NE) and from several other funding agencies.

  20. The integrated evaluation of the results of oncoplastic surgery for locally advanced breast cancer.

    Science.gov (United States)

    Bogusevicius, Algirdas; Cepuliene, Daiva; Sepetauskiene, Egle

    2014-01-01

    The optimal surgical management of locally advanced breast cancer (LABC) remains undefined. The aim of the study was to obtain long-term results of oncoplastic surgery in terms of overall survival, loco-regional recurrence, and quality of life in case of LABC. Prospective cohort study enrolled 60 patients with stage III breast cancer. Forty-two (70%) patients received neo-adjuvant chemotherapy, 28 patients were considered suitable for surgery as initial treatment option. Type II oncoplastic surgery was performed for all patients: hemimastectomy and breast reconstruction with latissimus dorsi flap - for 29 (48.3%), lumpectomy - 31 (51.7%), and reconstruction with subaxillary flap for four (6.7%), with bilateral reduction mammoplasty - 14 (23.3%) and with J-plastic - 13 (21.7%) patients. Adjuvant chemotherapy and hormonal therapy followed surgery for all, except one, patients. Sequential radiotherapy was administered for all patients. The mean period of follow-up was 86 months. Postoperative morbidity rate was 5%. Local-regional recurrence was detected in six (10%) patients. After reoperation no local relapse was diagnosed. However, three of these patients had systemic dissemination of the disease. Distant metastasis was detected in 23 (38.3%) patients. Distant metastasis-free survival at 5 years was 61.7%. Fourteen patients died (23.3%). A total of 87.2% of the patients had good and excellent esthetic outcome. Oncoplastic breast-conserving surgery can be proposed for selected patients with LABC with acceptable complication, local recurrence rate, and good esthetic results. © 2013 Wiley Periodicals, Inc.

  1. How type II CRISPR-Cas establish immunity through Cas1-Cas2-mediated spacer integration.

    Science.gov (United States)

    Xiao, Yibei; Ng, Sherwin; Nam, Ki Hyun; Ke, Ailong

    2017-10-05

    CRISPR (clustered regularly interspaced short palindromic repeats) and the nearby Cas (CRISPR-associated) operon establish an RNA-based adaptive immunity system in prokaryotes. Molecular memory is created when a short foreign DNA-derived prespacer is integrated into the CRISPR array as a new spacer. Whereas the RNA-guided CRISPR interference mechanism varies widely among CRISPR-Cas systems, the spacer integration mechanism is essentially identical. The conserved Cas1 and Cas2 proteins form an integrase complex consisting of two distal Cas1 dimers bridged by a Cas2 dimer. The prespacer is bound by Cas1-Cas2 as a dual-forked DNA, and the terminal 3'-OH of each 3' overhang serves as an attacking nucleophile during integration. The prespacer is preferentially integrated into the leader-proximal region of the CRISPR array, guided by the leader sequence and a pair of inverted repeats inside the CRISPR repeat. Spacer integration in the well-studied Escherichia coli type I-E CRISPR system also relies on the bacterial integration host factor. In type II-A CRISPR, however, Cas1-Cas2 alone integrates spacers efficiently in vitro; other Cas proteins (such as Cas9 and Csn2) have accessory roles in the biogenesis phase of prespacers. Here we present four structural snapshots from the type II-A system of Enterococcus faecalis Cas1 and Cas2 during spacer integration. Enterococcus faecalis Cas1-Cas2 selectively binds to a splayed 30-base-pair prespacer bearing 4-nucleotide 3' overhangs. Three molecular events take place upon encountering a target: first, the Cas1-Cas2-prespacer complex searches for half-sites stochastically, then it preferentially interacts with the leader-side CRISPR repeat, and finally, it catalyses a nucleophilic attack that connects one strand of the leader-proximal repeat to the prespacer 3' overhang. Recognition of the spacer half-site requires DNA bending and leads to full integration. We derive a mechanistic framework to explain the stepwise spacer

  2. Advanced Approach to Consider Aleatory and Epistemic Uncertainties for Integral Accident Simulations

    International Nuclear Information System (INIS)

    Peschke, Joerg; Kloos, Martina

    2013-01-01

    The use of best-estimate codes together with realistic input data generally requires that all potentially important epistemic uncertainties which may affect the code prediction are considered in order to get an adequate quantification of the epistemic uncertainty of the prediction as an expression of the existing imprecise knowledge. To facilitate the performance of the required epistemic uncertainty analyses, methods and corresponding software tools are available like, for instance, the GRS-tool SUSA (Software for Uncertainty and Sensitivity Analysis). However, for risk-informed decision-making, the restriction on epistemic uncertainties alone is not enough. Transients and accident scenarios are also affected by aleatory uncertainties which are due to the unpredictable nature of phenomena. It is essential that aleatory uncertainties are taken into account as well, not only in a simplified and supposedly conservative way but as realistic as possible. The additional consideration of aleatory uncertainties, for instance, on the behavior of the technical system, the performance of plant operators, or on the behavior of the physical process provides a quantification of probabilistically significant accident sequences. Only if a safety analysis is able to account for both epistemic and aleatory uncertainties in a realistic manner, it can provide a well-founded risk-informed answer for decision-making. At GRS, an advanced probabilistic dynamics method was developed to address this problem and to provide a more realistic modeling and assessment of transients and accident scenarios. This method allows for an integral simulation of complex dynamic processes particularly taking into account interactions between the plant dynamics as simulated by a best-estimate code, the dynamics of operator actions and the influence of epistemic and aleatory uncertainties. In this paper, the GRS method MCDET (Monte Carlo Dynamic Event Tree) for probabilistic dynamics analysis is explained

  3. The experiences of pregnant women at an advanced maternal age: an integrative review.

    Science.gov (United States)

    Aldrighi, Juliane Dias; Wall, Marilene Loewen; Souza, Silvana Regina Rossi Kissula; Cancela, Franciane Zabloski Vieira

    2016-01-01

    To identify in the literature how the experiences of women age 35 or above are described in terms of pregnancy. Integrative review based on MEDLINE/PubMed, CINAHL, LILACS, and SciELO databases, with no time period constraint. Eighteen studies that dealt with the experiences of pregnant women at an advanced maternal age were selected and analyzed. The studies evidenced four theme categories: the search for information, which pointed to a deficit of information supplied by health care professionals; perceiving the risks, which pointed to women's concerns about their own health and their children's; the ideal moment for motherhood, with different reasons for postponing it; and adjusting to a new routine, showing a concern regarding changes in daily life. From the results, it was possible to understand that other factors, in addition to those that include risks, are present in the experiences of older pregnant women and point to a need to involve such aspects in nursing care to create comprehensive strategies that are aligned with these women's needs. Identificar na literatura como são descritas as experiências das mulheres com idade igual ou superior a 35 anos na gestação. Revisão integrativa realizada nas bases de dados MEDLINE/PubMed, CINAHL, LILACS e SciELO, sem restrição de período. Foram selecionados e analisados 18 estudos que tratavam das experiências das mulheres na gestação em idade avançada. Os estudos evidenciaram quatro categorias temáticas: A busca por informações, que mostrou aspectos como deficit de informações fornecidas pelos profissionais da saúde;Percebendo os riscos, que apontou uma preocupação da mulher com a própria saúde e a do filho;Momento ideal para a maternidade, com diferentes motivos para o adiamento; e Adaptação à nova rotina, com a preocupação em relação às mudanças no cotidiano. A partir dos resultados, foi possível compreender que outros fatores, além dos que incluem os riscos, permeiam as experi

  4. Integrated concept development of next-step helical-axis advanced stellarators

    Energy Technology Data Exchange (ETDEWEB)

    Warmer, Felix

    2016-04-13

    With the increasing energy demand of mankind and the transformation of our society towards sustainability, nuclear fusion by magnetic confinement is a promising option for the sustainable electricity supply in the future. In view of these prospects this thesis focuses on the concept development of next-step helical-axis advanced stellarator (HELIAS) burning-plasma devices. The HELIAS-line is the continued development of the prototype optimised stellarator Wendelstein 7-X which started operation in 2015. For the integrated concept development of such devices, the approach taken in this work encompasses detailed physics and engineering considerations while also including economic aspects. Starting with physics considerations, the properties of plasma transport and confinement of 3D stellarator configurations are discussed due to their critical importance for the device design. It becomes clear that current empirical confinement time scalings are not sufficient to predict the confinement in future stellarator devices. Therefore, detailed 1D transport simulations are carried out to reduce the uncertainties regarding confinement. Beyond the well-validated neoclassical approach, first attempts are made to include results from state-of-the-art turbulence simulations into the 1D transport simulations to further enhance the predictive capabilities. Next, for the systematic development of consistent design points, stellarator-specific models are developed and implemented in the well-established European systems code PROCESS. This allows a consistent description of an entire HELIAS fusion power plant including physics, engineering, and economic considerations. With the confidence obtained from a verification study, systems studies are for the first time applied for a HELIAS power-plant which shows that the available design window is constrained by the beta-limit. Furthermore, an economic comparison of an exemplary design point to an ''equivalent'' tokamak

  5. Effects of advanced carbohydrate counting guided by an automated bolus calculator in Type 1 diabetes mellitus (StenoABC)

    DEFF Research Database (Denmark)

    Hommel, E; Schmidt, S; Vistisen, D

    2017-01-01

    AIMS: To test whether concomitant use of an automated bolus calculator for people with Type 1 diabetes carrying out advanced carbohydrate counting would induce further improvements in metabolic control. METHODS: We conducted a 12-month, randomized, parallel-group, open-label, single-centre, inves......AIMS: To test whether concomitant use of an automated bolus calculator for people with Type 1 diabetes carrying out advanced carbohydrate counting would induce further improvements in metabolic control. METHODS: We conducted a 12-month, randomized, parallel-group, open-label, single...... carbohydrate counting using mental calculations (MC group) or advanced carbohydrate counting using an automated bolus calculator (ABC group) during a 3.5-h group training course. For 12 months after training, participants attended a specialized diabetes centre quarterly. The primary outcome was change in HbA1c...... HbA1c reductions when guided by an automated bolus calculator (NCT02084498)....

  6. Integration of human papillomavirus type-16 and type-18 is a very early event in cervical carcinogenesis.

    Science.gov (United States)

    Huang, L-W; Chao, S-L; Lee, B-H

    2008-05-01

    Human papillomavirus (HPV) integration is a critical event in cervical carcinogenesis. The aim of this study was to explore the physical status of HPV-16 and HPV-18 during the progression of cervical precancerous lesions. A series of 101 HPV-16 or HPV-18 positive cervical neoplasms (32 cervical intraepithelial neoplasia (CIN) cases and 69 cervical carcinoma (CC) cases) were evaluated. The physical status of both types of HPV was assessed from paraffin-embedded formaldehyde-fixed surgical specimens by real-time PCR. For HPV-16, integrated DNA was observed in 5 (83.3%) of 6 CIN I cases, 10 (90.9%) of 11 CIN II/III cases, 29 (82.9%) of 35 FIGO (International Federation of Gynecology and Obstetrics) stage I CC cases and 16 (94.1%) of 17 FIGO stages II approximately IV CC cases. For HPV-18, integrated DNA was observed in 3 (50%) of 6 CIN I cases, 5 (55.6%) of 9 CIN II/III cases, 9 (64.3%) of 14 FIGO stage I CC cases, and 1 (33.3%) of 3 FIGO stages II approximately IV CC cases. The mixed form of HPV DNA was the most prevalent physical state in HPV-16. There was no significant difference between the physical state of HPV-16 and HPV-18 DNA with regard to the various grades of cervical lesions. These data imply that integration of HPV-16 and HPV-18 DNA into the host genome occurs in the very early stage of cervical neoplastic progression. These early events may play an initiating role in the malignant transformation of HPV-16- and HPV-18-related low-grade lesions into high-grade dysplasia and invasive carcinoma.

  7. Serum levels of advanced glycation end products are associated with left ventricular diastolic function in patients with type 1 diabetes

    DEFF Research Database (Denmark)

    Berg, T J; Snorgaard, O; Faber, J

    1999-01-01

    Impairment of left ventricular diastolic function, possibly caused by increased collagen cross-linking of the cardiac muscle, is common in patients with type 1 diabetes even without coronary artery disease. Advanced glycation end products (AGEs) cross-link tissue collagen and are found within...

  8. Further development of Chebyshev type inequalities for Sugeno integrals and T-(S-)evaluators

    Czech Academy of Sciences Publication Activity Database

    Agahi, H.; Mesiar, Radko; Ouyang, Y.

    2010-01-01

    Roč. 46, č. 1 (2010), s. 83-95 ISSN 0023-5954 R&D Projects: GA ČR GA402/08/0618 Institutional research plan: CEZ:AV0Z10750506 Keywords : Sugeno integral * fuzzy measure * comonotone functions * Chebyshev's inequality Subject RIV: BA - General Mathematics Impact factor: 0.461, year: 2010 http://library.utia.cas.cz/separaty/2010/E/mesiar-further development of chebyshev type inequalities for sugeno integral s and t-(s-)evaluators.pdf

  9. Integration of equations of parabolic type by the method of nets

    CERN Document Server

    Saul'Yev, V K; Stark, M; Ulam, S

    1964-01-01

    International Series of Monographs in Pure and Applied Mathematics, Volume 54: Integration of Equations of Parabolic Type by the Method of Nets deals with solving parabolic partial differential equations using the method of nets. The first part of this volume focuses on the construction of net equations, with emphasis on the stability and accuracy of the approximating net equations. The method of nets or method of finite differences (used to define the corresponding numerical method in ordinary differential equations) is one of many different approximate methods of integration of partial diff

  10. Massive Machine-Type Communication (mMTC) Access with Integrated Authentication

    DEFF Research Database (Denmark)

    Pratas, Nuno; Pattathil, Sarath; Stefanovic, Cedomir

    2017-01-01

    We present a connection establishment protocol with integrated authentication, suited for Massive Machine-Type Communications (mMTC). The protocol is contention-based and its main feature is that a device contends with a unique signature that also enables the authentication of the device towards...... efficiently, achieves lower latency of connection establishment for Poisson arrivals and allows a 86% signalling overhead reduction. An important conclusion is that the mMTC traffic benefits profoundly from integration of security features into the connection establishment/access protocols, instead...

  11. Current advanced therapy cell-based medicinal products for type-1-diabetes treatment.

    Science.gov (United States)

    Cañibano-Hernández, Alberto; Del Burgo, Laura Sáenz; Espona-Noguera, Albert; Ciriza, Jesús; Pedraz, Jose Luis

    2018-03-27

    In the XXI century diabetes mellitus has become one of the main threats to human health with higher incidence in regions such as Europe and North America. Type 1 diabetes mellitus (T1DM) occurs as a consequence of the immune-mediated destruction of insulin producing β-cells located in the endocrine part of the pancreas, the islets of Langerhans. The administration of exogenous insulin through daily injections is the most prominent treatment for T1DM but its administration is frequently associated to failure in glucose metabolism control, finally leading to hyperglycemia episodes. Other approaches have been developed in the past decades, such as whole pancreas and islet allotransplantation, but they are restricted to patients who exhibit frequent episodes of hypoglycemia or renal failure because the lack of donors and islet survival. Moreover, patients transplanted with either whole pancreas or islets require of immune suppression to avoid the rejection of the transplant. Currently, advanced therapy medicinal products (ATMP), such as implantable devices, have been developed in order to reduce immune rejection response while increasing cell survival. To overcome these issues, ATMPs must promote vascularization, guaranteeing the nutritional contribution, while providing O 2 until vasculature can surround the device. Moreover, it should help in the immune-protection to avoid acute and chronic rejection. The transplanted cells or islets should be embedded within biomaterials with tunable properties like injectability, stiffness and porosity mimicking natural ECM structural characteristics. And finally, an infinitive cell source that solves the donor scarcity should be found such as insulin producing cells derived from mesenchymal stem cells (MSCs), embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs). Several companies have registered their ATMPs and future studies envision new prototypes. In this review, we will discuss the mechanisms and etiology of

  12. Advances in risk-oriented surgery for multiple endocrine neoplasia type 2.

    Science.gov (United States)

    Machens, Andreas; Dralle, Henning

    2018-02-01

    Genetic association studies hinge on definite clinical case definitions of the disease of interest. This is why more penetrant mutations were overrepresented in early multiple endocrine neoplasia type 2 (MEN2) studies, whereas less penetrant mutations went underrepresented. Enrichment of genetic association studies with advanced disease may produce a flawed understanding of disease evolution, precipitating far-reaching surgical strategies like bilateral total adrenalectomy and 4-gland parathyroidectomy in MEN2. The insight into the natural course of the disease gleaned over the past 25 years caused a paradigm shift in MEN2: from the removal of target organs at the expense of greater operative morbidity to close biochemical surveillance and targeted resection of adrenal tumors and hyperplastic parathyroid glands. The lead time provided by early identification of asymptomatic MEN2 carriers under biochemical surveillance delimits a 'window of opportunity', within which (i) pre-emptive total thyroidectomy alone is adequate, circumventing morbidity attendant to central node dissection; (ii) subtotal 'tissue-sparing' adrenalectomy is sufficient, trading the risk of steroid dependency for the risk of a second pheochromocytoma in the adrenal remnant and (iii) parathyroidectomy is limited to enlarged glands, trading the risk of postoperative hypoparathyroidism for the risk of leaving behind hyperactive parathyroid glands. Future research should delineate further the mutation-specific, age-dependent penetrance of pheochromocytoma and primary hyperparathyroidism to refine the risk-oriented approach to MEN2. The sweeping changes in the management of MEN2 since the new millenium hold the hope that death and major morbidity from this uncommon disease can be eliminated in our lifetime. © 2018 Society for Endocrinology.

  13. Evidence-based use of electronic clinical tracking systems in advanced practice registered nurse education: an integrative review.

    Science.gov (United States)

    Branstetter, M Laurie; Smith, Lynette S; Brooks, Andrea F

    2014-07-01

    Over the past decade, the federal government has mandated healthcare providers to incorporate electronic health records into practice by 2015. This technological update in healthcare documentation has generated a need for advanced practice RN programs to incorporate information technology into education. The National Organization of Nurse Practitioner Faculties created core competencies to guide program standards for advanced practice RN education. One core competency is Technology and Information Literacy. Educational programs are moving toward the utilization of electronic clinical tracking systems to capture students' clinical encounter data. The purpose of this integrative review was to evaluate current research on advanced practice RN students' documentation of clinical encounters utilizing electronic clinical tracking systems to meet advanced practice RN curriculum outcome goals in information technology as defined by the National Organization of Nurse Practitioner Faculties. The state of the science depicts student' and faculty attitudes, preferences, opinions, and data collections of students' clinical encounters. Although electronic clinical tracking systems were utilized to track students' clinical encounters, these systems have not been evaluated for meeting information technology core competency standards. Educational programs are utilizing electronic clinical tracking systems with limited evidence-based literature evaluating the ability of these systems to meet the core competencies in advanced practice RN programs.

  14. Socio-Spatial Integration of Older Adults in Four Types of Residential Environments in Israel.

    Science.gov (United States)

    Schorr, Adi Vitman; Iecovich, Esther; Alfasi, Nurit; Shamai, Shmuel

    2017-10-01

    The socio-spatial integration of older people in different types of residential environments is a key factor affecting the well-being of older people. This study, which included a convenience sample of 565 participants, examined the socio-spatial integration of older people living in two different regional areas (central and peripheral) and four different residential environments (metropolitan hub, city, and town and rural settlements) in Israel. Willing participants were asked to complete a self-administered questionnaire. Socio-spatial integration was assessed by recognition of their neighbors and sense of belonging to the residential environment. The findings show that older adults who resided in the town and in rural settlements were more socio-spatially integrated in their living environments compared with their counterparts who resided in cities. The best predictors of socio-spatial integration were a combination of personal characteristics and characteristics of the environment (perceived accessibility) except for rural settlements, where none of the variables predicted socio-spatial integration.

  15. Integral equations for free-molecule ow in MEMS: recent advancements

    Directory of Open Access Journals (Sweden)

    Fedeli Patrick

    2017-03-01

    Full Text Available We address a Boundary Integral Equation (BIE approach for the analysis of gas dissipation in near-vacuum for Micro Electro Mechanical Systems (MEMS. Inspired by an analogy with the radiosity equation in computer graphics, we discuss an efficient way to compute the visible domain of integration. Moreover, we tackle the issue of near singular integrals by developing a set of analytical formulas for planar polyhedral domains. Finally a validation with experimental results taken from the literature is presented.

  16. RENEWABLE ENERGY, A KEY TO INTEGRATING COMPETITIVE POLICIES WITH ADVANCED ENVIRONMENT PROTECTION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Cinade Lucian Ovidiu

    2011-12-01

    Full Text Available Development of competitive policies and improvement of environment protection strategies are two basic trends of the development of the European Unique Market. Energy, also known as 'industry bread', is basic product and strategic resource, where energy industry plays an obvious role in the economic and social development of any community. Traditional energy production is marred by three major drawbacks: it generates negative externalities by polluting; it is totally in the hands of the producers; hence, prices rise at their will, of fossil fuels such as oil and gas. Present study focuses on electric energy industry, yet bearing over the whole length of the chain producer-to-end-consumer, thus revealed as particularly complex. The question is do alternative energy sources meet the prerequisite of market being competitive meanwhile environment protection being highly observed. We identify limits in point, of the energy market; effects of market liberalization; entry barriers; interchangeability level of energy sources; active forces on the energy market. Competitive rivalry has been expressed as per market micro-economic analysis, based on Michael Porter's 5-forces model. It will thus be noticed that, morphologically, competition evolution depends firstly on the market type. For the time being, the consumer on the energy market stays captive, for various reasons such as: legislation; limits of energy transfer infrastructure; scarcity of resources; resources availability imbalance; no integrative strategy available, of renewable energy resources usage. Energy availability is vital for human society to function. Comparative advantages of renewable energy resources are twofold, as manifested: in terms of economics, i.e. improving competition by substitute products entered at the same time as new producers enter market; and in terms of ecology, by reducing CO2 emissions. As to energy production technology and transfer, the complementary nature will

  17. Advanced treatment of biologically pretreated coal gasification wastewater by a novel integration of heterogeneous Fenton oxidation and biological process.

    Science.gov (United States)

    Xu, Peng; Han, Hongjun; Zhuang, Haifeng; Hou, Baolin; Jia, Shengyong; Xu, Chunyan; Wang, Dexin

    2015-04-01

    Laboratorial scale experiments were conducted in order to investigate a novel system integrating heterogeneous Fenton oxidation (HFO) with anoxic moving bed biofilm reactor (ANMBBR) and biological aerated filter (BAF) process on advanced treatment of biologically pretreated coal gasification wastewater (CGW). The results indicated that HFO with the prepared catalyst (FeOx/SBAC, sewage sludge based activated carbon (SBAC) which loaded Fe oxides) played a key role in eliminating COD and COLOR as well as in improving the biodegradability of raw wastewater. The surface reaction and hydroxyl radicals (OH) oxidation were the mechanisms for FeOx/SBAC catalytic reaction. Compared with ANMBBR-BAF process, the integrated system was more effective in abating COD, BOD5, total phenols (TPs), total nitrogen (TN) and COLOR and could shorten the retention time. Therefore, the integrated system was a promising technology for engineering applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Integrating Prognostics in Automated Contingency Management Strategies for Advanced Aircraft Controls, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Impact Technologies, in collaboration with Georgia Institute of Technology, proposes to develop and demonstrate innovative technologies to integrate prognostics into...

  19. Is health systems integration being advanced through Local Health District planning?

    Science.gov (United States)

    Saunders, Carla; Carter, David J

    2017-05-01

    Objective Delivering genuine integrated health care is one of three strategic directions in the New South Wales (NSW) Government State Health Plan: Towards 2021. This study investigated the current key health service plan of each NSW Local Health District (LHD) to evaluate the extent and nature of health systems integration strategies that are currently planned. Methods A scoping review was conducted to identify common key principles and practices for successful health systems integration to enable the development of an appraisal tool to content assess LHD strategic health service plans. Results The strategies that are planned for health systems integration across LHDs focus most often on improvements in coordination, health care access and care delivery for complex at-risk patients across the care continuum by both state- and commonwealth-funded systems, providers and agencies. The most common reasons given for integrated activities were to reduce avoidable hospitalisation, avoid inappropriate emergency department attendance and improve patient care. Conclusions Despite the importance of health systems integration and finding that all NSW LHDs have made some commitment towards integration in their current strategic health plans, this analysis suggests that health systems integration is in relatively early development across NSW. What is known about the topic? Effective approaches to managing complex chronic diseases have been found to involve health systems integration, which necessitates sound communication and connection between healthcare providers across community and hospital settings. Planning based on current health systems integration knowledge to ensure the efficient use of scarce resources is a responsibility of all health systems. What does this paper add? Appropriate planning and implementation of health systems integration is becoming an increasingly important expectation and requirement of effective health systems. The present study is the first of

  20. Integrated Advanced Monopropellant CMC Thruster / Thermal Stand-Off Assembly, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — High performance non-toxic monopropellants offer significant benefits relative to the current state-of-the-art. The benefits of these advanced monopropellants (AMP)...

  1. FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance

    Energy Technology Data Exchange (ETDEWEB)

    Harris, C.E.

    1994-09-01

    International technical experts in durability and damage tolerance of metallic airframe structures were assembled to present and discuss recent research findings and the development of advanced design and analysis methods, structural concepts, and advanced materials. The symposium focused on the dissemination of new knowledge and the peer-review of progress on the development of advanced methodologies. Papers were presented on: structural concepts for enhanced durability, damage tolerance, and maintainability; new metallic alloys and processing technology; fatigue crack initiation and small crack effects; fatigue crack growth models; fracture mechanics failure, criteria for ductile materials; structural mechanics methodology for residual strength and life prediction; development of flight load spectra for design and testing; and advanced approaches to resist corrosion and environmentally assisted fatigue. Separate abstracts have been indexed for articles from this report.

  2. Advances in diagnosis and treatment of hepatorenal syndrome type of acute kidney injury in patients with liver cirrhosis

    Directory of Open Access Journals (Sweden)

    SONG Tingxue

    2017-03-01

    Full Text Available Acute kidney injury (AKI is a common complication of liver cirrhosis and mainly manifests as a rapidly elevated serum creatinine level, a reduced glomerular filtration rate, and oliguria or anuria. Type 1 hepatorenal syndrome (HRS-1 is a special type of AKI, and patients with untreated HRS-1 have an extremely high risk of death. Early diagnosis and treatment are of great importance. This paper summarizes the latest diagnostic criteria for hepatorenal syndrome (HRS type of AKI and research advances in the treatment of HRS-1.

  3. Integrating multiple data types into a useful whole with the Live Access Server

    Science.gov (United States)

    Callahan, J.; Hankin, S.

    2006-05-01

    The Live Access Server (LAS) is a highly configurable Web server designed to provide flexible access to geo- referenced scientific data. It can be used to unify access to multiple types of data in a single interface and to create thematic data servers from distributed data sources. Much of the focus of LAS has been on creating configurable solutions that can adapt to the changing needs of observational networks. This talk will discuss recent examples where LAS has been used as a data integrator for collections of observational data of various types as well as satellite products and model output.

  4. Erythropoietin response to anemia and its association with autonomic neuropathy in type 2 diabetic patients without advanced renal failure.

    Science.gov (United States)

    Kim, Mee Kyoung; Baek, Ki Hyun; Lim, Dong Jun; Kim, Young Kyu; Kang, Moo-Il; Lee, Kwang-Woo; Song, Ki-Ho

    2010-01-01

    We aim to investigate erythropoietin (EPO) response to anemia and its association with autonomic neuropathy in type 2 diabetic patients without advanced renal failure. A cross-sectional study was conducted on 211 type 2 diabetes mellitus patients without advanced renal failure [estimated glomerular filtration rate (eGFR) >40 ml/min/1.73 m(2)]. The response of EPO to anemia of type 2 diabetic patients without advanced renal failure was compared with those of nondiabetic control subjects. Autonomic nerve function was assessed using three cardiovascular tests (deep breathing, the Valsalva maneuver, and lying-to-standing). The results of each test were scored as 0 if normal, 1 if borderline, and 2 if abnormal. Autonomic neuropathy was diagnosed when a total score of the tests was 2 or more. Fifty-eight patients were anemic; compared with nonanemic patients, they had a longer duration of diabetes (16.69+/-10.11 vs. 10.67+/-8.41 years, Pdiabetic patients and nondiabetic control subjects (-0.0085 vs. -0.255, P=.008). Multiple linear regression analysis revealed that cardiovascular autonomic neuropathy score was independently related to Hb (Pdiabetic patients without advanced renal failure.

  5. Evolution equation of Lie-type for finite deformations, time-discrete integration, and incremental methods

    Czech Academy of Sciences Publication Activity Database

    Fiala, Zdeněk

    2015-01-01

    Roč. 226, č. 1 (2015), s. 17-35 ISSN 0001-5970 R&D Projects: GA ČR(CZ) GA103/09/2101 Institutional support: RVO:68378297 Keywords : solid mechanics * finite deformations * evolution equation of Lie-type * time-discrete integration Subject RIV: BA - General Mathematics OBOR OECD: Statistics and probability Impact factor: 1.694, year: 2015 http://link.springer.com/article/10.1007%2Fs00707-014-1162-9#page-1

  6. Blending work-integrated learning with distance education in an Australian radiation therapy advanced practice curriculum

    International Nuclear Information System (INIS)

    Matthews, Kristie; Wright, Caroline; Osborne, Catherine

    2014-01-01

    Advanced practice for radiation therapists has been a part of the international landscape for several years; however formal implementation into the Australian health care system is yet to happen. Despite this, three short course radiation therapy advanced practitioner programs have been established by an Australian tertiary institution in response to clinical service needs at several organisations. This paper describes the rationale for curriculum design and development of the program materials, the small-scale implementation of the programs at pilot sites, and the evolution of the curriculum to be available to registered radiation therapists nationally. Each program has been designed around a specific clinical role, where flexibility of delivery to busy practitioners was central to the decision to offer them via distance education. The curriculum comprises theoretical units of study which run in parallel to and underpin clinical practice units, where advanced competence in the specific area of practice is overseen by an experienced radiation oncologist mentor. Given the nature of the disparate clinical services requiring an advanced radiation therapy practitioner, the workplace learning component of the course is individually negotiated at a local level. Outcomes suggest that the flexible clinically based training underpinned by a distance education academic curriculum is able to support the development of advanced radiation therapy practitioners responsive to local service need, and ultimately may improve the patient experience

  7. Implementation of integrated care for diabetes mellitus type 2 by two Dutch care groups : A case study

    NARCIS (Netherlands)

    Busetto, Loraine; Luijkx, Katrien; Huizing, Anna; Vrijhoef, H.J.M.

    2015-01-01

    Background Even though previous research has demonstrated improved outcomes of integrated care initiatives, it is not clear why and when integrated care works. This study aims to contribute to filling this knowledge gap by examining the implementation of integrated care for type 2 diabetes by two

  8. Optimal order and time-step criterion for Aarseth-type N-body integrators

    International Nuclear Information System (INIS)

    Makino, Junichiro

    1991-01-01

    How the selection of the time-step criterion and the order of the integrator change the efficiency of Aarseth-type N-body integrators is discussed. An alternative to Aarseth's scheme based on the direct calculation of the time derivative of the force using the Hermite interpolation is compared to Aarseth's scheme, which uses the Newton interpolation to construct the predictor and corrector. How the number of particles in the system changes the behavior of integrators is examined. The Hermite scheme allows a time step twice as large as that for the standard Aarseth scheme for the same accuracy. The calculation cost of the Hermite scheme per time step is roughly twice as much as that of the standard Aarseth scheme. The optimal order of the integrators depends on both the particle number and the accuracy required. The time-step criterion of the standard Aarseth scheme is found to be inapplicable to higher-order integrators, and a more uniformly reliable criterion is proposed. 18 refs

  9. Optimal order and time-step criterion for Aarseth-type N-body integrators

    Science.gov (United States)

    Makino, Junichiro

    1991-03-01

    How the selection of the time-step criterion and the order of the integrator change the efficiency of Aarseth-type N-body integrators is discussed. An alternative to Aarseth's scheme based on the direct calculation of the time derivative of the force using the Hermite interpolation is compared to Aarseth's scheme, which uses the Newton interpolation to construct the predictor and corrector. How the number of particles in the system changes the behavior of integrators is examined. The Hermite scheme allows a time step twice as large as that for the standard Aarseth scheme for the same accuracy. The calculation cost of the Hermite scheme per time step is roughly twice as much as that of the standard Aarseth scheme. The optimal order of the integrators depends on both the particle number and the accuracy required. The time-step criterion of the standard Aarseth scheme is found to be inapplicable to higher-order integrators, and a more uniformly reliable criterion is proposed.

  10. Optimal order and time-step criterion for Aarseth-type N-body integrators

    Energy Technology Data Exchange (ETDEWEB)

    Makino, Junichiro (Tokyo Univ. (Japan))

    1991-03-01

    How the selection of the time-step criterion and the order of the integrator change the efficiency of Aarseth-type N-body integrators is discussed. An alternative to Aarseth's scheme based on the direct calculation of the time derivative of the force using the Hermite interpolation is compared to Aarseth's scheme, which uses the Newton interpolation to construct the predictor and corrector. How the number of particles in the system changes the behavior of integrators is examined. The Hermite scheme allows a time step twice as large as that for the standard Aarseth scheme for the same accuracy. The calculation cost of the Hermite scheme per time step is roughly twice as much as that of the standard Aarseth scheme. The optimal order of the integrators depends on both the particle number and the accuracy required. The time-step criterion of the standard Aarseth scheme is found to be inapplicable to higher-order integrators, and a more uniformly reliable criterion is proposed. 18 refs.

  11. Developing and Integrating Advanced Movement Features Improves Automated Classification of Ciliate Species.

    Science.gov (United States)

    Soleymani, Ali; Pennekamp, Frank; Petchey, Owen L; Weibel, Robert

    2015-01-01

    Recent advances in tracking technologies such as GPS or video tracking systems describe the movement paths of individuals in unprecedented details and are increasingly used in different fields, including ecology. However, extracting information from raw movement data requires advanced analysis techniques, for instance to infer behaviors expressed during a certain period of the recorded trajectory, or gender or species identity in case data is obtained from remote tracking. In this paper, we address how different movement features affect the ability to automatically classify the species identity, using a dataset of unicellular microbes (i.e., ciliates). Previously, morphological attributes and simple movement metrics, such as speed, were used for classifying ciliate species. Here, we demonstrate that adding advanced movement features, in particular such based on discrete wavelet transform, to morphological features can improve classification. These results may have practical applications in automated monitoring of waste water facilities as well as environmental monitoring of aquatic systems.

  12. Developing and Integrating Advanced Movement Features Improves Automated Classification of Ciliate Species.

    Directory of Open Access Journals (Sweden)

    Ali Soleymani

    Full Text Available Recent advances in tracking technologies such as GPS or video tracking systems describe the movement paths of individuals in unprecedented details and are increasingly used in different fields, including ecology. However, extracting information from raw movement data requires advanced analysis techniques, for instance to infer behaviors expressed during a certain period of the recorded trajectory, or gender or species identity in case data is obtained from remote tracking. In this paper, we address how different movement features affect the ability to automatically classify the species identity, using a dataset of unicellular microbes (i.e., ciliates. Previously, morphological attributes and simple movement metrics, such as speed, were used for classifying ciliate species. Here, we demonstrate that adding advanced movement features, in particular such based on discrete wavelet transform, to morphological features can improve classification. These results may have practical applications in automated monitoring of waste water facilities as well as environmental monitoring of aquatic systems.

  13. Design and development of face seal type sealing plug for advanced heavy water reactor

    International Nuclear Information System (INIS)

    Bansal, S.; Bhattacharyya, S.; Patel, R.J.; Agrawal, R.G.; Vaze, K.K.

    2005-09-01

    Advanced Heavy Water Reactor is a vertical pressure tube type reactor having light water as its coolant and heavy water as moderator. Sealing plug is required to close the pressure boundary of main heat transport system of the reactor by preventing escape of light water/steam From the coolant channel. There are 452 coolant channels in the reactor located in square lattice pitch. Sealing plug is located at the top of each coolant channel (in the top end fitting). Top end fitting is having a stepped bore to create a sealing face. Sealing plug is held through its expanded jaws in a specially provided groove of the end fitting. The plug was designed and prototypes were manufactured considering its functional importance, intricate design and precision machining requirements. Sealing plug consists of about 20 components mostly made up of precipitation hardening stainless steel, which is suitable for water environment and meets other requirements of strength and resistance to wear and galling. Seal disc is a critical component of the sealing plug as it is the pressure-retaining component. It is a circular disc with protruded stem. One face of the seal disc is nickel plated in the peripheral area that creates the sealing by abutting against the sealing face provided in the end fitting. The typical shape and profile of seal disc provides flexibility and allows elastic deformation to assist in locking of sealing plug and creating adequate seating force for effective sealing. Design and development aspects of the sealing plug have been detailed out in this report. Also results of stress analysis and experimental studies for seal disc have been mentioned in the report. Stress analysis and experimental testing was required for the seal disc because high stresses are developed due to its exposure to high pressure and temperature environment of Main Heat Transport system. Hot testing was carried out to simulate the reactor-simulated condition. The performance was found to be

  14. Characteristics of sandwich-type structural elements built of advanced composite materials from three dimensional fabrics

    Directory of Open Access Journals (Sweden)

    Castejón, L.

    1997-12-01

    Full Text Available Sandwich-type structures have proved to be alternatives of great success for several fields of application, and specially in the building sector. This is due to their outstanding properties of .specific rigidity and strength against bending loads and other range of advantages like fatigue and impact resistance, attainment of flat and smooth surfaces, high electric and thermal insulation, design versatility and some others. However, traditional sandwich structures present problems like their tendency towards delamination, stress concentrations in bores or screwed Joints, and pre resistance. These problems are alleviated thanks to the use of new sandwich structures built using three dimensional structures of advanced composite materials, maintaining the present advantages for more traditional sandwich structures. At this rate, these new structures can be applied in several areas where conventional sandwich structures used to be like walls, partitions, floor and ceiling structures, domes, vaults and dwellings, but with greater success.

    Las estructuras tipo sándwich han demostrado ser alternativas de gran éxito para diversos campos de aplicación y, en concreto, en el sector de la construcción, listo es gracias a sus excelentes propiedades de rigidez y resistencia específica frente a cargas de flexión y otra larga lista de ventajas, a la que pertenecen, por ejemplo, su buena resistencia a fatiga, resistencia al impacto, obtención de superficies lisas y suaves, elevado aislamiento térmico y eléctrico, versatilidad de diseño y otras. Sin embargo, las estructuras sándwich, tradicionales presentan una problemática consistente en su tendencia a la delaminación, concentraciones de tensiones ¿aparecidas ante la existencia de agujeros o uniones atornilladas y resistencia al fuego. Estos problemas son pifiados gracias a la aplicación de estructuras novedosas tipo sándwich, construidas a partir de tejidos tridimensionales de materiales

  15. Some new retarded nonlinear Volterra-Fredholm type integral inequalities with maxima in two variables and their applications.

    Science.gov (United States)

    Xu, Run; Ma, Xiangting

    2017-01-01

    In this paper, we establish some new retarded nonlinear Volterra-Fredholm type integral inequalities with maxima in two independent variables, and we present the applications to research the boundedness of solutions to retarded nonlinear Volterra-Fredholm type integral equations.

  16. Advances in type-2 fuzzy sets and systems theory and applications

    CERN Document Server

    Mendel, Jerry; Tahayori, Hooman

    2013-01-01

    This book explores recent developments in the theoretical foundations and novel applications of general and interval type-2 fuzzy sets and systems, including: algebraic properties of type-2 fuzzy sets, geometric-based definition of type-2 fuzzy set operators, generalizations of the continuous KM algorithm, adaptiveness and novelty of interval type-2 fuzzy logic controllers, relations between conceptual spaces and type-2 fuzzy sets, type-2 fuzzy logic systems versus perceptual computers; modeling human perception of real world concepts with type-2 fuzzy sets, different methods for generating membership functions of interval and general type-2 fuzzy sets, and applications of interval type-2 fuzzy sets to control, machine tooling, image processing and diet.  The applications demonstrate the appropriateness of using type-2 fuzzy sets and systems in real world problems that are characterized by different degrees of uncertainty.

  17. Integrating first-line treatment options into clinical practice: what's new in advanced melanoma?

    Science.gov (United States)

    Dummer, Reinhard; Schadendorf, Dirk; Ascierto, Paolo A; Larkin, James; Lebbé, Celeste; Hauschild, Axel

    2015-12-01

    Melanoma remains a serious form of skin cancer in Europe and worldwide. Localized, early-stage melanomas can usually be treated with surgical excision. However, the prognosis is poorer for patients with advanced disease. Before 2011, treatment for advanced melanoma included palliative surgery and/or radiotherapy, and chemotherapy with or without immunotherapy, such as interleukin-2. As none of these treatments had shown survival benefits in patients with advanced melanoma, European guidelines had recommended that patients be entered into clinical trials. The lack of approved first-line options and varying access to clinical trials meant that European clinicians relied on experimental regimens and chemotherapy-based treatments when no other options were available. Since 2011, ipilimumab, an immuno-oncology therapy, and vemurafenib and dabrafenib, targeted agents that inhibit mutant BRAF, have been approved by the European Medicines Agency for the treatment of advanced melanoma. More recently, the MEK inhibitor, trametinib, received European marketing authorization for use in patients with BRAF mutation-positive advanced melanoma. In 2014, the anti-PD-1 antibody nivolumab was approved as a first-line therapy in Japan. Whereas nivolumab and another anti-PD-1 antibody, pembrolizumab, were approved as second-line therapies in the USA, their recent approval in Europe are for first-line use based on new clinical trial data in this setting. Together these agents are changing clinical practice and making therapeutic decisions more complex. Here, we discuss current and emerging therapeutic options for the first-line treatment of advanced melanoma, and how these therapies can be optimized to provide the best possible outcomes for patients.

  18. The Plant-Window System: A framework for an integrated computing environment at advanced nuclear power plants

    International Nuclear Information System (INIS)

    Wood, R.T.; Mullens, J.A.; Naser, J.A.

    1997-01-01

    Power plant data, and the information that can be derived from it, provide the link to the plant through which the operations, maintenance and engineering staff understand and manage plant performance. The extensive use of computer technology in advanced reactor designs provides the opportunity to greatly expand the capability to obtain, analyze, and present data about the plant to station personnel. However, to support highly efficient and increasingly safe operation of nuclear power plants, it is necessary to transform the vast quantity of available data into clear, concise, and coherent information that can be readily accessed and used throughout the plant. This need can be met by an integrated computer workstation environment that provides the necessary information and software applications, in a manner that can be easily understood and sued, to the proper users throughout the plan. As part of a Cooperative Research and Development Agreement with the Electric Power Research Institute, the Oak Ridge National laboratory has developed functional requirements for a Plant-Wide Integrated Environment Distributed On Workstations (Plant-Window) System. The Plant-Window System (PWS) can serve the needs of operations, engineering, and maintenance personnel at nuclear power stations by providing integrated data and software applications within a common computing environment. The PWS requirements identify functional capabilities and provide guidelines for standardized hardware, software, and display interfaces so as to define a flexible computing environment for both current generation nuclear power plants and advanced reactor designs

  19. Advancing Tissue Engineering: A Tale of Nano-, Micro-, and Macroscale Integration

    NARCIS (Netherlands)

    Leijten, Jeroen Christianus Hermanus; Rouwkema, Jeroen; Zhang, Y.S.; Nasajpour, A.; Dokmeci, M.R.; Khademhosseini, A.

    2016-01-01

    Tissue engineering has the potential to revolutionize the health care industry. Delivering on this promise requires the generation of efficient, controllable and predictable implants. The integration of nano- and microtechnologies into macroscale regenerative biomaterials plays an essential role in

  20. Advanced Numerical Integration Techniques for HighFidelity SDE Spacecraft Simulation

    Data.gov (United States)

    National Aeronautics and Space Administration — Classic numerical integration techniques, such as the ones at the heart of several NASA GSFC analysis tools, are known to work well for deterministic differential...

  1. Integrating Prognostics in Automated Contingency Management Strategies for Advanced Aircraft Controls, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Automated Contingency Management (ACM) is an emerging and game-changing area of engineering and scientific research that integrates prognostics and health management...

  2. Partnering with Industry to Advance Biofuels, NREL's Integrated Biorefinery Research Facility (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2010-10-01

    Fact sheet describing NREL's Integrated Biorefinery Research Facility and its availability to biofuels' industry partners who want to operate, test, and develop biorefining technology and equipment.

  3. Integrated hot fuel gas cleaning for advanced gasification combined cycle process

    Energy Technology Data Exchange (ETDEWEB)

    Nieminen, M.; Kangasmaa, K.; Laatikainen, J.; Staahlberg, P.; Kurkela, E. [VTT Energy, Espoo (Finland). Gasification and Advanced Combustion

    1996-12-01

    The fate of halogens in pressurised fluidized-bed gasification and hot gas filtration is determined. Potential halogen removal sorbents, suitable for integrated hot gas cleaning, are screened and some selected sorbents are tested in bench scale. Finally, halogen removal results are verified using the PDU-scale pressurised fluidized-bed gasification and integrated hot gas cleaning facilities of VTT. The project is part of the JOULE II Extension programme of the European Union. (author)

  4. The role of business information management in advanced integrated environmental management systems

    DEFF Research Database (Denmark)

    Ulhøi, John Parm

    2000-01-01

    investments in the individual company. Secondly, based on the above, to calculate and assess some typical quantifiable savings, e.g. on energy and raw materials, over a period of four years (after the implementation of the integrated environmental management system). In line with other similar investigations......, the study shows that the implementation of systematic and integrated environmental management systems results in significant savings. This supports the general, albeit rarely tested, hypothesis that it pays to be an environmentally responsible enterprise....

  5. Equilibrium control of nonlinear verticum-type systems, applied to integrated pest control.

    Science.gov (United States)

    Molnár, S; Gámez, M; López, I; Cabello, T

    2013-08-01

    Linear verticum-type control and observation systems have been introduced for modelling certain industrial systems, consisting of subsystems, vertically connected by certain state variables. Recently the concept of verticum-type observation systems and the corresponding observability condition have been extended by the authors to the nonlinear case. In the present paper the general concept of a nonlinear verticum-type control system is introduced, and a sufficient condition for local controllability to equilibrium is obtained. In addition to a usual linearization, the basic idea is a decomposition of the control of the whole system into the control of the subsystems. Starting from the integrated pest control model of Rafikov and Limeira (2012) and Rafikov et al. (2012), a nonlinear verticum-type model has been set up an equilibrium control is obtained. Furthermore, a corresponding bioeconomical problem is solved minimizing the total cost of integrated pest control (combining chemical control with a biological one). Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  6. Assessment of advanced practice palliative care nursing competencies in nurse practitioner students: implications for the integration of ELNEC curricular modules.

    Science.gov (United States)

    Shea, Joyce; Grossman, Sheila; Wallace, Meredith; Lange, Jean

    2010-04-01

    Advanced practice nurses (APRNs) have key roles in the care of patients who are nearing death and those living with a disabling chronic disease. This article describes a mixed-method formative assessment of 36 graduate nursing students' knowledge about and attitudes toward palliative care preliminary to curricular integration of the End-of-Life Nursing Education Consortium (ELNEC) graduate core modules. Students' knowledge about palliative care was assessed using the 106-item ELNEC examination. In addition, qualitative data were gathered regarding students' definitions of palliative care, the role of the APRN in palliative care, and their definitions of a "good" and "bad" death. Results revealed students' limited knowledge about palliative care. Qualitative findings indicated that most students exclusively linked palliative care with end-of-life care and believed that the treatment they provide should have the goal of prolonging life over maintaining quality of life. Implications for curriculum design, advanced practice role development, and collaboration with community health partners are discussed.

  7. Advanced treatment of oilfield production wastewater by an integration of coagulation/flotation, catalytic ozonation and biological processes.

    Science.gov (United States)

    Chen, Ke-Yong; Zhang, Xiao-Bing; Li, Jun

    2016-10-01

    In this study, advanced treatment of heavily polluted oilfield production wastewater (OPW) was investigated employing the combination of coagulation/dissolved air flotation, heterogeneous catalytic ozonation and sequencing batch reactor (SBR) processes. Two SBR reactors were separately set up before and after the ozonation unit. The results show that microbubble flotation was more efficient than macrobubble flotation in pollutant removal. Catalytic ozonation with the prepared Fe/activated carbon catalyst significantly enhanced pollutant removal in the second SBR by improving wastewater biodegradability and reducing wastewater microtoxicity. The treatment technique decreased oil, chemical oxygen demand and NH3-N by about 97%, 88% and 91%, respectively, allowing the discharge limits to be met. Therefore, the integrated process with efficient, economical and sustainable advantages was suitable for advanced treatment of real OPW.

  8. The Attending Nurse Caring Model: integrating theory, evidence and advanced caring-healing therapeutics for transforming professional practice.

    Science.gov (United States)

    Watson, Jean; Foster, Roxie

    2003-05-01

    This paper presents a proposed model: The Attending Nursing Caring Model (ANCM) as an exemplar for advancing and transforming nursing practice within a reflective, theoretical and evidence-based context. Watson's theory of human caring is used as a guide for integrating theory, evidence and advanced therapeutics in the area of children's pain. The ANCM is offered as a programme for renewing the profession and its professional practices of caring-healing arts and science, during an era of decline, shortages, and crises in care, safety, and hospital and health reform. The ANCM elevates contemporary nursing's caring values, relationships, therapeutics and responsibilities to a higher/deeper order of caring science and professionalism, intersecting with other professions, while sustaining the finest of its heritage and traditions of healing.

  9. Development and Integration of a HEMS with an Advanced Smart Metering Infrastructure

    DEFF Research Database (Denmark)

    Diaz, Enrique Rodriguez; Palacios-Garcia, Emilio; Savaghebi, Mehdi

    2016-01-01

    Advanced metering infrastructures (AMI) are required for the future smart grid operation by providing useful information about users’ behavior as well as grid performance such as the consumption and power quality. This paper is focused on the development of a LabVIEW application for user...

  10. Special Features of the Advanced Loans Module of the ABCD Integrated Library System

    Science.gov (United States)

    de Smet, Egbert

    2011-01-01

    Purpose: The "advanced loans" module of the relatively new library software, ABCD, is an addition to the normal loans module and it offers a "generic transaction decision-making engine" functionality. The module requires extra installation effort and parameterisation, so this article aims to explain to the many potentially interested libraries,…

  11. Recent Developments of Hilbert-Type Discrete and Integral Inequalities with Applications

    Directory of Open Access Journals (Sweden)

    Lokenath Debnath

    2012-01-01

    Full Text Available This paper deals with recent developments of Hilbert-type discrete and integral inequalities by introducing kernels, weight functions, and multiparameters. Included are numerous generalizations, extensions, and refinements of Hilbert-type inequalities involving many special functions such as beta, gamma, logarithm, trigonometric, hyper-bolic, Bernoulli's functions and Bernoulli's numbers, Euler's constant, zeta function, and hypergeometric functions with many applications. Special attention is given to many equivalent inequalities and to conditions under which the constant factors involved in inequalities are the best possible. Many particular cases of Hilbert-type inequalities are presented with numerous applications. A large number of major books and recent research papers published during 2009–2012 are included to stimulate new interest in future study and research.

  12. Advanced Amine Solvent Formulations and Process Integration for Near-Term CO2 Capture Success

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, Kevin S.; Searcy, Katherine; Rochelle, Gary T.; Ziaii, Sepideh; Schubert, Craig

    2007-06-28

    This Phase I SBIR project investigated the economic and technical feasibility of advanced amine scrubbing systems for post-combustion CO2 capture at coal-fired power plants. Numerous combinations of advanced solvent formulations and process configurations were screened for energy requirements, and three cases were selected for detailed analysis: a monoethanolamine (MEA) base case and two “advanced” cases: an MEA/Piperazine (PZ) case, and a methyldiethanolamine (MDEA) / PZ case. The MEA/PZ and MDEA/PZ cases employed an advanced “double matrix” stripper configuration. The basis for calculations was a model plant with a gross capacity of 500 MWe. Results indicated that CO2 capture increased the base cost of electricity from 5 cents/kWh to 10.7 c/kWh for the MEA base case, 10.1 c/kWh for the MEA / PZ double matrix, and 9.7 c/kWh for the MDEA / PZ double matrix. The corresponding cost per metric tonne CO2 avoided was 67.20 $/tonne CO2, 60.19 $/tonne CO2, and 55.05 $/tonne CO2, respectively. Derated capacities, including base plant auxiliary load of 29 MWe, were 339 MWe for the base case, 356 MWe for the MEA/PZ double matrix, and 378 MWe for the MDEA / PZ double matrix. When compared to the base case, systems employing advanced solvent formulations and process configurations were estimated to reduce reboiler steam requirements by 20 to 44%, to reduce derating due to CO2 capture by 13 to 30%, and to reduce the cost of CO2 avoided by 10 to 18%. These results demonstrate the potential for significant improvements in the overall economics of CO2 capture via advanced solvent formulations and process configurations.

  13. Tri-Lab Co-Design Milestone: In-Depth Performance Portability Analysis of Improved Integrated Codes on Advanced Architecture.

    Energy Technology Data Exchange (ETDEWEB)

    Hoekstra, Robert J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hammond, Simon David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Richards, David [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bergen, Ben [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-01

    This milestone is a tri-lab deliverable supporting ongoing Co-Design efforts impacting applications in the Integrated Codes (IC) program element Advanced Technology Development and Mitigation (ATDM) program element. In FY14, the trilabs looked at porting proxy application to technologies of interest for ATS procurements. In FY15, a milestone was completed evaluating proxy applications in multiple programming models and in FY16, a milestone was completed focusing on the migration of lessons learned back into production code development. This year, the co-design milestone focuses on extracting the knowledge gained and/or code revisions back into production applications.

  14. Improved characterization of reservoir behavior by integration of reservoir performances data and rock type distributions

    Energy Technology Data Exchange (ETDEWEB)

    Davies, D.K.; Vessell, R.K. [David K. Davies & Associates, Kingwood, TX (United States); Doublet, L.E. [Texas A& M Univ., College Station, TX (United States)] [and others

    1997-08-01

    An integrated geological/petrophysical and reservoir engineering study was performed for a large, mature waterflood project (>250 wells, {approximately}80% water cut) at the North Robertson (Clear Fork) Unit, Gaines County, Texas. The primary goal of the study was to develop an integrated reservoir description for {open_quotes}targeted{close_quotes} (economic) 10-acre (4-hectare) infill drilling and future recovery operations in a low permeability, carbonate (dolomite) reservoir. Integration of the results from geological/petrophysical studies and reservoir performance analyses provide a rapid and effective method for developing a comprehensive reservoir description. This reservoir description can be used for reservoir flow simulation, performance prediction, infill targeting, waterflood management, and for optimizing well developments (patterns, completions, and stimulations). The following analyses were performed as part of this study: (1) Geological/petrophysical analyses: (core and well log data) - {open_quotes}Rock typing{close_quotes} based on qualitative and quantitative visualization of pore-scale features. Reservoir layering based on {open_quotes}rock typing {close_quotes} and hydraulic flow units. Development of a {open_quotes}core-log{close_quotes} model to estimate permeability using porosity and other properties derived from well logs. The core-log model is based on {open_quotes}rock types.{close_quotes} (2) Engineering analyses: (production and injection history, well tests) Material balance decline type curve analyses to estimate total reservoir volume, formation flow characteristics (flow capacity, skin factor, and fracture half-length), and indications of well/boundary interference. Estimated ultimate recovery analyses to yield movable oil (or injectable water) volumes, as well as indications of well and boundary interference.

  15. Advancing a Distributive-Bargaining and Integrative-Negotiation Integral System: A Values-Based Negotiation Model (VBM

    Directory of Open Access Journals (Sweden)

    Ivan Gan

    2017-09-01

    Full Text Available The proposed values-based negotiation model (VBM agrees with and extends principled negotiation’s recognition of personal values and emotions as important negotiation elements. First, building upon Martin Buber’s existentialist treatment of religion and secularism, VBM centers on religion as one of many possible sources of personal values that informs respectful and mutually beneficial interactions without needing one to necessarily be religious. Just as one need not be a Buddhist or a Hindu to practice yoga, negotiators of any theological outlook can profit from a model grounded in broad, common tenets drawn from a range of organized religions. Second, VBM distinguishes feelings from emotions because the long-lasting and intrinsically stimulated effects of feelings have greater implications on the perception of negotiated outcomes. VBM negotiators view negotiations as a constitutive prosocial process whereby parties consider the outcome important enough to invest time and energy. Negotiators who use VBM appeal to the goodness of their counterparts by doing good first so that both parties avoid a win-lose outcome. This counterintuitive move contradicts the self-centered but understandably normal human behavior of prioritizing one’s own interests before others’ interests. However, when one appeals to the goodness of one’s Buberian Thou counterparts, he or she stimulates positive emotions that promote understanding. Third, VBM provides a framework that draws upon an individual’s personal values (religious or otherwise and reconfigures the distributive-bargaining-and-integrative-negotiation distinction so that negotiators can freely apply distributive tactics to claim maximum intangible and tangible outcomes without compromising on their personal values or valuable relationships.

  16. Physician organization-practice team integration for the advancement of patient-centered care.

    Science.gov (United States)

    Wise, Christopher G; Alexander, Jeffrey A; Green, Lee A; Cohen, Genna R

    2012-01-01

    The patient-centered medical home is being promoted as a cornerstone for transforming primary care. Physician organizations (POs) are playing a more prominent role by facilitating practices' transformation to the patient-centered medical home. Using a framework of organizational integration, we investigated the changing relationship between POs and practices through qualitative interviews. Through increased integration, POs can support both the big picture and day-to-day activities of practice transformation. Most PO-practice unit connections we identified reflected new areas of engagement-competencies that POs were not developing in the past-that are proving integral to the broad-scale practice change of patient-centered medical home implementation.

  17. Advanced Stirling Convertor Dual Convertor Controller Testing at NASA Glenn Research Center in the Radioisotope Power Systems System Integration Laboratory

    Science.gov (United States)

    Dugala, Gina M.; Taylor, Linda M.; Bell, Mark E.; Dolce, James L.; Fraeman, Martin; Frankford, David P.

    2015-01-01

    NASA Glenn Research Center developed a nonnuclear representation of a Radioisotope Power System (RPS) consisting of a pair of Advanced Stirling Convertors (ASCs), Dual Convertor Controller (DCC) EMs (engineering models) 2 and 3, and associated support equipment, which were tested in the Radioisotope Power Systems System Integration Laboratory (RSIL). The DCC was designed by the Johns Hopkins University Applied Physics Laboratory (JHU/APL) to actively control a pair of ASCs. The first phase of testing included a Dual Advanced Stirling Convertor Simulator (DASCS), which was developed by JHU/APL and simulates the operation and electrical behavior of a pair of ASCs in real time via a combination of hardware and software. RSIL provides insight into the electrical interactions between a representative radioisotope power generator, its associated control schemes, and realistic electric system loads. The first phase of integration testing included the following spacecraft bus configurations: capacitive, battery, and super-capacitor. A load profile, created based on data from several missions, tested the RPS's and RSIL's ability to maintain operation during load demands above and below the power provided by the RPS. The integration testing also confirmed the DCC's ability to disconnect from the spacecraft when the bus voltage dipped below 22 volts or exceeded 36 volts. Once operation was verified with the DASCS, the tests were repeated with actual operating ASCs. The goal of this integration testing was to verify operation of the DCC when connected to a spacecraft and to verify the functionality of the newly designed RSIL. The results of these tests are presented in this paper.

  18. Quantum mechanical path integrals in curved spaces and the type-A trace anomaly

    Energy Technology Data Exchange (ETDEWEB)

    Bastianelli, Fiorenzo [Dipartimento di Fisica ed Astronomia, Università di Bologna,via Irnerio 46, I-40126 Bologna (Italy); INFN, Sezione di Bologna,via Irnerio 46, I-40126 Bologna (Italy); Corradini, Olindo [Dipartimento di Scienze Fisiche, Informatiche e Matematiche,Università di Modena e Reggio Emilia,Via Campi 213/A, I-41125 Modena (Italy); INFN, Sezione di Bologna,via Irnerio 46, I-40126 Bologna (Italy); Vassura, Edoardo [Dipartimento di Fisica ed Astronomia, Università di Bologna,via Irnerio 46, I-40126 Bologna (Italy); INFN, Sezione di Bologna,via Irnerio 46, I-40126 Bologna (Italy)

    2017-04-10

    Path integrals for particles in curved spaces can be used to compute trace anomalies in quantum field theories, and more generally to study properties of quantum fields coupled to gravity in first quantization. While their construction in arbitrary coordinates is well understood, and known to require the use of a regularization scheme, in this article we take up an old proposal of constructing the path integral by using Riemann normal coordinates. The method assumes that curvature effects are taken care of by a scalar effective potential, so that the particle lagrangian is reduced to that of a linear sigma model interacting with the effective potential. After fixing the correct effective potential, we test the construction on spaces of maximal symmetry and use it to compute heat kernel coefficients and type-A trace anomalies for a scalar field in arbitrary dimensions up to d=12. The results agree with expected ones, which are reproduced with great efficiency and extended to higher orders. We prove explicitly the validity of the simplified path integral on maximally symmetric spaces. This simplified path integral might be of further use in worldline applications, though its application on spaces of arbitrary geometry remains unclear.

  19. Advanced glycation end-product expression is upregulated in the gastrointestinal tract of type 2 diabetic rats

    DEFF Research Database (Denmark)

    Chen, Peng-Min; Gregersen, Hans; Zhao, Jingbo

    2015-01-01

    AIM: To investigate changes in advanced glycation end products (AGEs) and their receptor (RAGE) expression in the gastrointestinal (GI) tract in type 2 diabetic rats. METHODS: Eight inherited type 2 diabetic rats Goto-Kakizak (GK) and ten age-matched normal rats were used in the study. From 18 wk...... software. RESULTS: The blood glucose concentration (mmol/L) at 18 wk age was highest in the GK group (8.88 ± 1.87 vs 6.90 ± 0.43, P end of the experiment. The wet weight per unit length (mg/cm) increased in esophagus, jejunum and colon from...

  20. Multi-functional integration of organic field-effect transistors (OFETs): advances and perspectives.

    Science.gov (United States)

    Di, Chong-an; Zhang, Fengjiao; Zhu, Daoben

    2013-01-18

    Multi-functional organic field-effect transistors (OFETs), an emerging focus of organic optoelectronic devices, hold great potential for a variety of applications. This report introduces recent progress on multi-functional OFETs including OFETs based sensors, phototransistors, light-emitting transistors, memory cells, and magnetic field-effect OFETs. Key strategies towards multi- functional integration of OFETs, which involves the exploration of functional materials, interfaces modifications, modulation of condensed structures, optimization of device geometry, and device integration, are summarized. Furthermore, remaining challenges and perspectives are discussed, giving a comprehensive overview of multi-functional OFETs. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Guidelines for Implementing Advanced Distribution Management Systems-Requirements for DMS Integration with DERMS and Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianhui [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, Chen [Argonne National Lab. (ANL), Argonne, IL (United States); Lu, Xiaonan [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-08-01

    This guideline focuses on the integration of DMS with DERMS and microgrids connected to the distribution grid by defining generic and fundamental design and implementation principles and strategies. It starts by addressing the current status, objectives, and core functionalities of each system, and then discusses the new challenges and the common principles of DMS design and implementation for integration with DERMS and microgrids to realize enhanced grid operation reliability and quality power delivery to consumers while also achieving the maximum energy economics from the DER and microgrid connections.

  2. Process control integration requirements for advanced life support systems applicable to manned space missions

    Science.gov (United States)

    Spurlock, Paul; Spurlock, Jack M.; Evanich, Peggy L.

    1991-01-01

    An overview of recent developments in process-control technology which might have applications in future advanced life support systems for long-duration space operations is presented. Consideration is given to design criteria related to control system selection and optimization, and process-control interfacing methodology. Attention is also given to current life support system process control strategies, innovative sensors, instrumentation and control, and innovations in process supervision.

  3. Advancement and Implementation of Integrated Computational Materials Engineering (ICME) for Aerospace Applications

    Science.gov (United States)

    2010-03-01

    when combined with advanced cooling configurations, have greatly increased turbine temperature and efficiency while simultaneously increasing...Phase diagrams • Database is generally sound Thermophysical properties 2.0 Material Processing Casting/Solidification ProCAST, Magma • • Commerc ial...London Elevated temperature flow stress Univ of Michigan Yield Model • • University code • Developed by Prof. Pollock Yield stress for ’ superalloys

  4. The role of technical advances in the adoption and integration of patient-reported outcomes in clinical care.

    Science.gov (United States)

    Jensen, Roxanne E; Rothrock, Nan E; DeWitt, Esi M; Spiegel, Brennan; Tucker, Carole A; Crane, Heidi M; Forrest, Christopher B; Patrick, Donald L; Fredericksen, Rob; Shulman, Lisa M; Cella, David; Crane, Paul K

    2015-02-01

    Patient-reported outcomes (PROs) are gaining recognition as key measures for improving the quality of patient care in clinical care settings. Three factors have made the implementation of PROs in clinical care more feasible: increased use of modern measurement methods in PRO design and validation, rapid progression of technology (eg, touchscreen tablets, Internet accessibility, and electronic health records), and greater demand for measurement and monitoring of PROs by regulators, payers, accreditors, and professional organizations. As electronic PRO collection and reporting capabilities have improved, the challenges of collecting PRO data have changed. To update information on PRO adoption considerations in clinical care, highlighting electronic and technical advances with respect to measure selection, clinical workflow, data infrastructure, and outcomes reporting. Five practical case studies across diverse health care settings and patient populations are used to explore how implementation barriers were addressed to promote the successful integration of PRO collection into the clinical workflow. The case studies address selecting and reporting of relevant content, workflow integration, previsit screening, effective evaluation, and electronic health record integration. These case studies exemplify elements of well-designed electronic systems, including response automation, tailoring of item selection and reporting algorithms, flexibility of collection location, and integration with patient health care data elements. They also highlight emerging logistical barriers in this area, such as the need for specialized technological and methodological expertise, and design limitations of current electronic data capture systems.

  5. Fatou type weighted pointwise convergence of nonlinear singular integral operators Depending on two parameters

    Directory of Open Access Journals (Sweden)

    Uysal Gumrah

    2016-01-01

    Full Text Available In this paper we present some theorems concerning existence and Fatou type weighted pointwise convergence of nonlinear singular integral operators of the form: (Tλf(x=∫RKλ(t−x; f(tdt, x∈R, λ∈Λ$({T_\\lambda }f(x = \\int\\limits_R {{K_\\lambda }} (t - x;{\\rm{ }}f(tdt,{\\rm{ x}} \\in R,{\\rm{ }}\\lambda \\in \\Lambda $ where Λ ≠ ∅ is a set of non-negative indices, at a common generalized Lebesgue point of the functions f ∈ L1,ϕ (R and positive weight function φ. Here, L1,ϕ (R is the space of all measurable functions for which |fϕ|$\\left| {{f \\over \\phi }} \\right|$ is integrable on R.

  6. Functional differential equations of neutral type with integrable weak singularity: hydrogen thermal desorption model

    Science.gov (United States)

    Zaika, Yury V.; Kostikova, Ekaterina K.

    2017-11-01

    One of the technological challenges for hydrogen materials science (including the ITER project) is the currently active search for structural materials with various potential applications that will have predetermined limits of hydrogen permeability. One of the experimental methods is thermal desorption spectrometry (TDS). A hydrogen-saturated sample is degassed under vacuum and monotone heating. The desorption flux is measured by mass spectrometer to determine the character of interactions of hydrogen isotopes with the solid. We are interested in such transfer parameters as the coefficients of diffusion, dissolution, desorption. The paper presents a thermal desorption functional differential equations of neutral type with integrable weak singularity and a numerical method for TDS spectrum simulation, where only integration of a nonlinear system of low order ordinary differential equations (ODE) is required. This work is supported by the Russian Foundation for Basic Research (project 15-01-00744).

  7. Advancing the US Department of Energy's Technologies through the Underground Storage Tank: Integrated Demonstration Program

    International Nuclear Information System (INIS)

    Gates, T.E.

    1993-01-01

    The principal objective of the Underground Storage Tank -- Integrated Demonstration Program is the demonstration and continued development of technologies suitable for the remediation of waste stored in underground storage tanks. The Underground Storage Tank Integrated Demonstration Program is the most complex of the integrated demonstration programs established under the management of the Office of Technology Development. The Program has the following five participating sites: Oak Ridge, Idaho, Fernald, Savannah River, and Hanford. Activities included within the Underground Storage Tank -- Integrated Demonstration are (1) characterizating radioactive and hazardous waste constituents, (2) determining the need and methodology for improving the stability of the waste form, (3) determining the performance requirements, (4) demonstrating barrier performance by instrumented field tests, natural analog studies, and modeling, (5) determining the need and method for destroying and stabilizing hazardous waste constituents, (6) developing and evaluating methods for retrieving, processing (pretreatment and treatment), and storing the waste on an interim basis, and (7) defining and evaluating waste packages, transportation options, and ultimate closure techniques including site restoration. The eventual objective is the transfer of new technologies as a system to full-scale remediation at the US Department of Energy complexes and sites in the private sector

  8. Advancing Integrated Pest Management for Dermanyssus gallinae in laying hen facilities

    NARCIS (Netherlands)

    Mul, Monique F.

    2017-01-01

    Pest and diseases in agricultural systems reduce the yield and quality of available food and feed worldwide. To meet the global growing demand for these products, losses should be reduced, preferably in a sustainable way. Integrated Pest Management (IPM) is a

  9. Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.

    Science.gov (United States)

    Chen, Yue; Gao, Qin; Song, Fei; Li, Zhizhong; Wang, Yufan

    2017-08-01

    In the main control rooms of nuclear power plants, operators frequently have to switch between procedure displays and system information displays. In this study, we proposed an operation-unit-based integrated design, which combines the two displays to facilitate the synthesis of information. We grouped actions that complete a single goal into operation units and showed these operation units on the displays of system states. In addition, we used different levels of visual salience to highlight the current unit and provided a list of execution history records. A laboratory experiment, with 42 students performing a simulated procedure to deal with unexpected high pressuriser level, was conducted to compare this design against an action-based integrated design and the existing separated-displays design. The results indicate that our operation-unit-based integrated design yields the best performance in terms of time and completion rate and helped more participants to detect unexpected system failures. Practitioner Summary: In current nuclear control rooms, operators frequently have to switch between procedure and system information displays. We developed an integrated design that incorporates procedure information into system displays. A laboratory study showed that the proposed design significantly improved participants' performance and increased the probability of detecting unexpected system failures.

  10. Technologies for Inclusive Education: Beyond Traditional Integration Approaches. Advances in Educational Technologies and Instructional Design

    Science.gov (United States)

    Barres, David Griol; Carrion, Zoraida Callejas; Lopez-Cozar Delgado, Ramon

    2013-01-01

    By providing students with the opportunities to receive a high quality education regardless of their social or cultural background, inclusive education is a new area that goes beyond traditional integration approaches. These approaches hope to provide the educative system with the ability to adapt to the diversity of its students. Technologies for…

  11. Silicon Compatible Materials, Processes, and Technologies for Advanced Integrated Circuits and Emerging Applications 6

    NARCIS (Netherlands)

    Roozeboom, F.; Narayanan, V.; Kakushima, K.; Timans, P.J.; Gusev, E.P.; Karim, Z.; Gendt, S. De

    2016-01-01

    The topics of this annual symposium continue to describe the evolution of traditional scaling in CMOS integrated circuit manufacturing (More Moore for short), combined with the opportunities from growing diversification and embedded functionality (More than Moore). Once again, the main objective was

  12. Flexible System Integration and Advanced Hierarchical Control Architectures in the Microgrid Research Laboratory of Aalborg University

    DEFF Research Database (Denmark)

    Meng, Lexuan; Hernández, Adriana Carolina Luna; Diaz, Enrique Rodriguez

    2016-01-01

    This paper presents the system integration and hierarchical control implementation in an inverter-based microgrid research laboratory (MGRL) in Aalborg University, Denmark. MGRL aims to provide a flexible experimental platform for comprehensive studies of microgrids. The structure of the laboratory...

  13. An Advanced Data Warehouse for Integrating Large Sets of GPS Data

    DEFF Research Database (Denmark)

    Andersen, Ove; Krogh, Benjamin Bjerre; Thomsen, Christian

    2014-01-01

    GPS data recorded from driving vehicles is available from many sources and is a very good data foundation for answering traffic related queries. However, most approaches so far have not considered combining GPS data from many sources into a single data warehouse. Further, the integration of GPS d...

  14. Faculty Professional Development: Advancing Integrative Social Pedagogy Using ePortfolio

    Science.gov (United States)

    Bhika, Rajendra; Francis, Andrea; Miller, Dionne

    2013-01-01

    This article highlights the work of three faculty members across two different professional development seminars at LaGuardia Community College. It illustrates how their work was guided and is linked together by a common thread--the use of ePortfolio to foster integrative social pedagogy--as a result of their participation in these seminars. This…

  15. Sun-downing and integration for the advancement of science and therapeutics: the National Institute on Substance Use Disorders (NISUD).

    Science.gov (United States)

    Grabowski, John

    2010-12-01

    The National Institutes of Health (NIH) is the most prominent funding source for scientific research in the world. It is also a complex and diverse organization, having multiple institutes, centers and offices. NIH emphasizes the need for innovation and collaboration in research to discover critical knowledge, enhance health and prevent disease. Advancement in science requires not only sophisticated methods, but also logical organization. Here, an overview of ‘behavioral research’ (writ large) at NIH is presented, focusing upon the common trinity of ‘alcohol, tobacco/nicotine and other drugs’ and programmatic overlap across entities. Consideration is also given to the origins of institutes and their historical movement across organizational boundaries. Specific issues, concerns and advantages of integration of the National Institute on Drug Abuse and National Institute on Alcoholism and Alcohol Abuse are addressed. It is concluded that advances in understanding, treating and preventing substance use disorders would best be served by (1)review and integration of all related research throughout NIH, (2) logical placement of leadership for this activity in a single institute, here entitled the National Institute on Substance Use Disorders, and (3) close collaboration of this institute with its complementary partner, the National Institute on Mental Health. Thus, NIH can establish an organizational structure and collaborations reflecting the realities of the scientific and disease/health domains. This would make a prominent statement to the world scientific and health communities regarding NIH recognition of the need for innovation (scientific and organizational) and focus upon these myriad interrelated and costly problems.

  16. Solving Hammerstein Type Integral Equation by New Discrete Adomian Decomposition Methods

    Directory of Open Access Journals (Sweden)

    Huda O. Bakodah

    2013-01-01

    Full Text Available New discrete Adomian decomposition methods are presented by using some identified Clenshaw-Curtis quadrature rules. We investigate two mixed quadrature rules one of precision five and the other of precision seven. The first rule is formed by using the Fejér second rule of precision three and Simpson rule of precision three, while the second rule is formed by using the Fejér second rule of precision five and the Boole rule of precision five. Our methods were applied to a nonlinear integral equation of the Hammerstein type and some examples are given to illustrate the validity of our methods.

  17. T3DB: an integrated database for bacterial type III secretion system

    OpenAIRE

    Wang, Yejun; Huang, He; Sun, Ming’an; Zhang, Qing; Guo, Dianjing

    2012-01-01

    Abstract Background Type III Secretion System (T3SS), which plays important roles in pathogenesis or symbiosis, is widely expressed in a variety of gram negative bacteria. However, lack of unique nomenclature for T3SS genes has hindered T3SS related research. It is necessary to set up a knowledgebase integrating T3SS-related research data to facilitate the communication between different research groups interested in different bacteria. Description A T3SS-related Database (T3DB) was developed...

  18. Martingale integrals over Poissonian processes and the Ito-type equations with white shot noise.

    Science.gov (United States)

    Zygadło, Ryszard

    2003-10-01

    The construction of the Ito-type stochastic integrals and differential equations for compound Poisson processes is provided. The general martingale and nonanticipating properties of the ordinary (Gaussian) Ito theory are conserved. These properties appear particularly important if the stochastic description has to be proposed according to game theory or the linear relaxation (or the exponential growth) requirements. In contrast to the ordinary Ito theory the (uncorrelated) parametric fluctuation of a definite sign can be still modeled by asymmetric white shot noise, so the general scope of applications is not restricted by the positivity requirements. The possible use of the developed formalism in econophysics is addressed.

  19. The Relaxation of Some Classes of Variational Integrals with Pointwise Continuous-Type Gradient Constraints

    International Nuclear Information System (INIS)

    De Arcangelis, Riccardo; Zappale, Elvira

    2005-01-01

    Relaxation problems for a functional are analyzed. Identity and integral representation results are proved under continuity-type assumptions, together with the description of the common density by means of convexification arguments. Classical relaxation results are extended to the case of the continuous variable dependence, and the non-identity features described in the measurable dependence case are shown to be non-occurring. Proofs are based on the properties of certain limits of multi-functions, and on an approximation result for functions. Results in more general settings are also obtained

  20. An Automatic Quadrature Schemes and Error Estimates for Semibounded Weighted Hadamard Type Hypersingular Integrals

    Directory of Open Access Journals (Sweden)

    Sirajo Lawan Bichi

    2014-01-01

    Full Text Available The approximate solutions for the semibounded Hadamard type hypersingular integrals (HSIs for smooth density function are investigated. The automatic quadrature schemes (AQSs are constructed by approximating the density function using the third and fourth kinds of Chebyshev polynomials. Error estimates for the semibounded solutions are obtained in the class of h(t∈CN,α[-1,1]. Numerical results for the obtained quadrature schemes revealed that the proposed methods are highly accurate when the density function h (t is any polynomial or rational functions. The results are in line with the theoretical findings.

  1. Advanced nutrient root feeding system for conveyer-type cylindrical plant growth facilities developed for microgravity

    Science.gov (United States)

    Berkovich, Yuliy A.; Smolyanina, Svetlana O.; Krivobok, Anna; Krivobok, Nikolay

    A new brand of cylindrical conveyer-type space plant growth facilities (PGF) has been created to improve of cosmonauts’ diet in the microgravity conditions. Up to date several ground prototypes of the space PGF have been made and tested: “Phytocycle”, “Vitacycle”, “Phytocycle-LED”, “Phytoconveyer”; now the space PGF “Vitacycle-T” for the Russian segment of the ISS is under developing. In the PGFs the ion-exchange salt-saturated fibrous artificial soil (AS) is used as a root medium. We have proposed the system for enrichment of irrigation water by nutrients to decrease of the AS store required for PGF working during the long space mission. The system includes root modules filled in fibrous ion-exchange AS, the enrichment column with crumble salt-saturation ion-exchange resin and the cassette with slow releasing fertilizer (SRF). Both substrates (ion-exchange resin and SRF) are necessary because of the SRF contains mostly N, P and K but another three essential elements S, Ca, Mg are provided by the ion-exchange resin. In the system water goes throw the enrichment column with ion-exchange resin fertilizing by the nutrients and comes into the mixer cell fertilize equipped with the electrical conductivity sensor. When the signal of the conductivity sensor is coming to the controller it turns on the pump directed the water flow throw the cassette with SRF until the electric conductivity of the solution in the mixer cell will reach the setpoint. The nutrient root feeding system was tested during 88 days when Chinese cabbage grew in PGF “Phytocycle-LED”. The crop has been continuously illuminated by red and blue LEDs in the PPF ratio 7 to 1; an integral PPF level has been (240 ± 10) µmol/(m2×s). There was no renewal of the used fibrous AS during the experiment. The PGF total electric power consumption was of 0,45 kW. The average fresh biomass productivity of the PGF during steady state working mode was equal 135×g/day per m2 of the illuminated

  2. Pilot vehicle interface on the advanced fighter technology integration F-16

    Science.gov (United States)

    Dana, W. H.; Smith, W. B.; Howard, J. D.

    1986-01-01

    This paper focuses on the work load aspects of the pilot vehicle interface in regard to the new technologies tested during AMAS Phase II. Subjects discussed in this paper include: a wide field-of-view head-up display; automated maneuvering attack system/sensor tracker system; master modes that configure flight controls and mission avionics; a modified helmet mounted sight; improved multifunction display capability; a voice interactive command system; ride qualities during automated weapon delivery; a color moving map; an advanced digital map display; and a g-induced loss-of-consciousness and spatial disorientation autorecovery system.

  3. Validation of the COBRA code for dry out power calculation in CANDU type advanced fuels

    International Nuclear Information System (INIS)

    Daverio, Hernando J.

    2003-01-01

    Stern Laboratories perform a full scale CHF testing of the CANFLEX bundle under AECL request. This experiment is modeled with the COBRA IV HW code to verify it's capacity for the dry out power calculation . Good results were obtained: errors below 10 % with respect to all data measured and 1 % for standard operating conditions in CANDU reactors range . This calculations were repeated for the CNEA advanced fuel CARA obtaining the same performance as the CANFLEX fuel. (author)

  4. Development of proto-type advanced leaked fuel rod detection system

    International Nuclear Information System (INIS)

    Kang, Kyung Chul; Cho, Seong Won; Jeon, Jae Hyuk; Jeong, Jae Cheon; Kim, Min

    1996-02-01

    The fuel inspection equipment using ultrasonic signal has been developed its design and configuration in order to get inspection results more accurate and easier than the previous ones. In this task, the system functions are advanced by adopting of state of the art technologies in the field of digital servo control and signal processing. By the above endeavors, the total performance are improved and made to handle easily. 61 tabs., 31 figs., 3 ills., 9 refs. (Author)

  5. Advances in gallium arsenide monolithic microwave integrated-circuit technology for space communications systems

    Science.gov (United States)

    Bhasin, K. B.; Connolly, D. J.

    1986-01-01

    Future communications satellites are likely to use gallium arsenide (GaAs) monolithic microwave integrated-circuit (MMIC) technology in most, if not all, communications payload subsystems. Multiple-scanning-beam antenna systems are expected to use GaAs MMIC's to increase functional capability, to reduce volume, weight, and cost, and to greatly improve system reliability. RF and IF matrix switch technology based on GaAs MMIC's is also being developed for these reasons. MMIC technology, including gigabit-rate GaAs digital integrated circuits, offers substantial advantages in power consumption and weight over silicon technologies for high-throughput, on-board baseband processor systems. In this paper, current developments in GaAs MMIC technology are described, and the status and prospects of the technology are assessed.

  6. Cloning of monomeric human papillomavirus type 16 DNA integrated within cell DNA from a cervical carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Matsukura, T.; Kanda, T.; Furuno, A.; Yoshikawa, H.; Kawana, T.; Yoshiike, K.

    1986-06-01

    The authors have molecularly cloned and characterized monomeric human papillomavirus type 16 DNA with flanking cell DNA sequences from a cervical carcinoma. Determination of nucleotide sequence around the junctions of human papillomavirus and cell DNAs revealed that at the site of integration within cell DNA the cloned viral DNA had a deletion between nucleotides 1284 and 4471 (numbering system from K. Seedorf, G. Kraemmer, M. Duerst, S. Suhai, and W.G. Roewkamp), which includes the greater part of E1 gene and the entire E2 gene. In the remaining part of the E1 gene, three guanines were found at the location where two guanines at nucleotides 1137 and 1138 have been recorded. This additional guanine shifted the reading frame and erased an interruption in the E1 gene. The data strongly suggest that, like other papillomaviruses, human papillomavirus type 16 has an uninterrupted E1 gene.

  7. Process Integration Study of Cache Valley Cheese Plant [Advanced Industrial Heat Pump Applications and Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Eastwood, A.

    1991-10-01

    This work has carried out in two phases: Phase 1; identification of opportunities for heat pumps in industrial applications and Phase 2; evaluation of heat pumps in industrial applications. In Phase 1, pinch analysis was applied to several industrial sites to identify the best opportunities for heat pumping and other forms of heat integration. In Phase 2, more detailed analyses were undertaken, including the evaluation of a heat pump installed as a recommendation of Phase 1.

  8. Recent advances in computational-analytical integral transforms for convection-diffusion problems

    Science.gov (United States)

    Cotta, R. M.; Naveira-Cotta, C. P.; Knupp, D. C.; Zotin, J. L. Z.; Pontes, P. C.; Almeida, A. P.

    2017-10-01

    An unifying overview of the Generalized Integral Transform Technique (GITT) as a computational-analytical approach for solving convection-diffusion problems is presented. This work is aimed at bringing together some of the most recent developments on both accuracy and convergence improvements on this well-established hybrid numerical-analytical methodology for partial differential equations. Special emphasis is given to novel algorithm implementations, all directly connected to enhancing the eigenfunction expansion basis, such as a single domain reformulation strategy for handling complex geometries, an integral balance scheme in dealing with multiscale problems, the adoption of convective eigenvalue problems in formulations with significant convection effects, and the direct integral transformation of nonlinear convection-diffusion problems based on nonlinear eigenvalue problems. Then, selected examples are presented that illustrate the improvement achieved in each class of extension, in terms of convergence acceleration and accuracy gain, which are related to conjugated heat transfer in complex or multiscale microchannel-substrate geometries, multidimensional Burgers equation model, and diffusive metal extraction through polymeric hollow fiber membranes. Numerical results are reported for each application and, where appropriate, critically compared against the traditional GITT scheme without convergence enhancement schemes and commercial or dedicated purely numerical approaches.

  9. Integrated nitrogen removal biofilter system with ceramic membrane for advanced post-treatment of municipal wastewater.

    Science.gov (United States)

    Son, Dong-Jin; Yun, Chan-Young; Kim, Woo-Yeol; Zhang, Xing-Ya; Kim, Dae-Gun; Chang, Duk; Sunwoo, Young; Hong, Ki-Ho

    2016-12-01

    The pre-denitrification biofilm process for nitrogen removal was combined with ceramic membrane with pore sizes of 0.05-0.1 µm as a system for advanced post-treatment of municipal wastewater. The system was operated under an empty bed hydraulic retention time of 7.8 h, recirculation ratio of 3, and transmembrane pressure of 0.47 bar. The system showed average removals of organics, total nitrogen, and solids as high as 93%, 80%, and 100%, respectively. Rapid nitrification could be achieved and denitrification was performed in the anoxic filter without external carbon supplements. The residual particulate organics and nitrogen in effluent from biofilm process could be also removed successfully through membrane filtration and the removal of total coliform was noticeably improved after membrane filtration. Thus, a system composed of the pre-denitrification biofilm process with ceramic membrane would be a compact and flexible option for advanced post-treatment of municipal wastewater.

  10. Pressurized Heavy Water Reactor Fuel: Integrity, Performance and Advanced Concepts. Proceedings of the Technical Meetings held in Bucharest, 24-27 September 2012, and in Mumbai, 8-11 May 2013

    International Nuclear Information System (INIS)

    2014-09-01

    Seven Member States have operating pressurized heavy water reactors (PHWRs), and some of them are also planning new reactors of this type. The current type of PHWR uses natural uranium as the fuel and has an average burnup of 7000 MWd/t (megawatt days per metric tonne). To make these reactors economically competitive with other reactor types, the discharge burnup of PHWR fuel will need to be increased without affecting the integrity of the fuel pin and bundle. A significant increase in the discharge burnup of fuel is possible with the use of advanced fuel cycles in PHWRs. The advanced fuels can be slightly enriched uranium, reprocessed uranium from light water reactors, mixed oxide or thorium based fuels. At the same time, substantial savings in natural uranium resources can also be achieved through the possible extension of the discharge burnup of advanced fuels used in PHWRs without changing reactor hardware. Following the recommendation of the Technical Working Group on Fuel Performance and Technology, two technical meetings were held: Technical Meeting on Fuel Integrity during Normal Operation and Accident Conditions in PHWRs, 24–27 September 2012, Bucharest, Romania; and Technical Meeting on Advanced Fuel Cycles in PHWRs, 8–11 April 2013, Mumbai, India. Their objective was to update information on the performance of PHWR fuels, the status and trends in the use of advanced fuels in PHWRs and the technical readiness for the deployment of such fuel cycles in these types of reactor. This publication contains the proceedings of the two technical meetings, including a record of the discussions held during the various technical sessions

  11. Advanced type 1 diabetes is associated with ASIC alterations in mouse lower thoracic dorsal root ganglia neurons.

    Science.gov (United States)

    Radu, Beatrice Mihaela; Dumitrescu, Diana Ionela; Marin, Adela; Banciu, Daniel Dumitru; Iancu, Adina Daniela; Selescu, Tudor; Radu, Mihai

    2014-01-01

    Acid-sensing ion channels (ASICs) from dorsal root ganglia (DRG) neurons are proton sensors during ischemia and inflammation. Little is known about their role in type 1 diabetes (T1D). Our study was focused on ASICs alterations determined by advanced T1D status. Primary neuronal cultures were obtained from lower (T9-T12) thoracic DRG neurons from Balb/c and TCR-HA(+/-)/Ins-HA(+/-) diabetic male mice (16 weeks of age). Patch-clamp recordings indicate a change in the number of small DRG neurons presenting different ASIC-type currents. Multiple molecular sites of ASICs are distinctly affected in T1D, probably due to particular steric constraints for glycans accessibility to the active site: (i) ASIC1 current inactivates faster, while ASIC2 is slower; (ii) PcTx1 partly reverts diabetes effects against ASIC1- and ASIC2-inactivations; (iii) APETx2 maintains unaltered potency against ASIC3 current amplitude, but slows ASIC3 inactivation. Immunofluorescence indicates opposite regulation of different ASIC transcripts while qRT-PCR shows that ASIC mRNA ranking (ASIC2 > ASIC1 > ASIC3) remains unaltered. In conclusion, our study has identified biochemical and biophysical ASIC changes in lower thoracic DRG neurons due to advanced T1D. As hypoalgesia is present in advanced T1D, ASICs alterations might be the cause or the consequence of diabetic insensate neuropathy.

  12. Manufacturing technique and properties of integral type forgings for steam generator of nuclear power plant

    International Nuclear Information System (INIS)

    Suzuki, Komei; Sato, Ikuo; Murai, Etsuo

    1992-01-01

    The use of integral type steel forgings for the construction of pressure vessel enhances the structural integrity of components and makes the fabrication of components and the execution of in-service inspection (ISI) easier than those fabrication from plate and casting materials. Such steel forgings have been realized for steam generator (SG) for nuclear power plant as follows: (1) Forged shell ring: change from welding fabrication of formed plates to forging; (2) Forged conical shell ring: ditto; (3) Forged head integral with nozzles(s) : (i) Primary head: change from casting to forging; (ii) Secondary head: change from welding fabrication of formed plates to forging. These steel forgings have been realized by recent development in manufacturing technologies, such as steel making, forging processes and heat treatment which are vital to the quality of steel forgings. Some examples of recent typical high quality steel forgings developed by the Japan Steel Works, Ltd. (JSW) are introduced, and the main points of the manufacturing technique and the quality attained are also described. (author)

  13. Prespacer processing and specific integration in a Type I-A CRISPR system

    Science.gov (United States)

    Rollie, Clare; Graham, Shirley; Rouillon, Christophe

    2018-01-01

    Abstract The CRISPR–Cas system for prokaryotic adaptive immunity provides RNA-mediated protection from viruses and mobile genetic elements. Adaptation is dependent on the Cas1 and Cas2 proteins along with varying accessory proteins. Here we analyse the process in Sulfolobus solfataricus, showing that while Cas1 and Cas2 catalyze spacer integration in vitro, host factors are required for specificity. Specific integration also requires at least 400 bp of the leader sequence, and is dependent on the presence of hydrolysable ATP, suggestive of an active process that may involve DNA remodelling. Specific spacer integration is associated with processing of prespacer 3′ ends in a PAM-dependent manner. This is reflected in PAM-dependent processing of prespacer 3′ ends in vitro in the presence of cell lysate or the Cas4 nuclease, in a reaction consistent with PAM-directed binding and protection of prespacer DNA. These results highlight the diverse interplay between CRISPR–Cas elements and host proteins across CRISPR types. PMID:29228332

  14. Prognosis and Clinicopathologic Features of Patients With Advanced Stage Isocitrate Dehydrogenase (IDH) Mutant and IDH Wild-Type Intrahepatic Cholangiocarcinoma.

    Science.gov (United States)

    Goyal, Lipika; Govindan, Aparna; Sheth, Rahul A; Nardi, Valentina; Blaszkowsky, Lawrence S; Faris, Jason E; Clark, Jeffrey W; Ryan, David P; Kwak, Eunice L; Allen, Jill N; Murphy, Janet E; Saha, Supriya K; Hong, Theodore S; Wo, Jennifer Y; Ferrone, Cristina R; Tanabe, Kenneth K; Chong, Dawn Q; Deshpande, Vikram; Borger, Darrell R; Iafrate, A John; Bardeesy, Nabeel; Zheng, Hui; Zhu, Andrew X

    2015-09-01

    Conflicting data exist regarding the prognostic impact of the isocitrate dehydrogenase (IDH) mutation in intrahepatic cholangiocarcinoma (ICC), and limited data exist in patients with advanced-stage disease. Similarly, the clinical phenotype of patients with advanced IDH mutant (IDHm) ICC has not been characterized. In this study, we report the correlation of IDH mutation status with prognosis and clinicopathologic features in patients with advanced ICC. Patients with histologically confirmed advanced ICC who underwent tumor mutational profiling as a routine part of their care between 2009 and 2014 were evaluated. Clinical and pathological data were collected by retrospective chart review for patients with IDHm versus IDH wild-type (IDHwt) ICC. Pretreatment tumor volume was calculated on computed tomography or magnetic resonance imaging. Of the 104 patients with ICC who were evaluated, 30 (28.8%) had an IDH mutation (25.0% IDH1, 3.8% IDH2). The median overall survival did not differ significantly between IDHm and IDHwt patients (15.0 vs. 20.1 months, respectively; p = .17). The pretreatment serum carbohydrate antigen 19-9 (CA19-9) level in IDHm and IDHwt patients was 34.5 and 118.0 U/mL, respectively (p = .04). Age at diagnosis, sex, histologic grade, and pattern of metastasis did not differ significantly by IDH mutation status. The IDH mutation was not associated with prognosis in patients with advanced ICC. The clinical phenotypes of advanced IDHm and IDHwt ICC were similar, but patients with IDHm ICC had a lower median serum CA19-9 level at presentation. Previous studies assessing the prognostic impact of the isocitrate dehydrogenase (IDH) gene mutation in intrahepatic cholangiocarcinoma (ICC) mainly focused on patients with early-stage disease who have undergone resection. These studies offer conflicting results. The target population for clinical trials of IDH inhibitors is patients with unresectable or metastatic disease, and the current study is the first to

  15. Hydrodynamic Performance of an Array of Wave Energy Converters Integrated with a Pontoon-Type Breakwater

    Directory of Open Access Journals (Sweden)

    De Zhi Ning

    2018-03-01

    Full Text Available The cost of wave energy converters (WECs can be reduced significantly by integrating WECs into other marine facilities, especially in sea areas with a mild wave climate. To reduce the cost and increase the efficiency, a hybrid WEC system, comprising a linear array (medium farm of oscillating buoy-type WECs attached to the weather side of a fixed-type floating pontoon as the base structure is proposed. The performance of the WEC array is investigated numerically using a boundary element method (BEM based on the linear potential flow theory. The linear power take-off (PTO damping model is used to calculate the output power of the WEC array. The performance of the WEC array and each individual WEC device is balanced by using the mean interaction factor and the individual interaction factor. To quantify the effect of the pontoon, the hydrodynamic results of the WEC arrays with and without a pontoon are compared with each other. Detailed investigations on the influence of the structural and PTO parameters are performed in a wide wave frequency range. Results show that the energy conversion efficiency of a WEC array with a properly designed pontoon is much higher than that without a pontoon. This integration scheme can achieve the efficiency improvement and construction-cost reduction of the wave energy converters.

  16. A fully Bayesian latent variable model for integrative clustering analysis of multi-type omics data.

    Science.gov (United States)

    Mo, Qianxing; Shen, Ronglai; Guo, Cui; Vannucci, Marina; Chan, Keith S; Hilsenbeck, Susan G

    2018-01-01

    Identification of clinically relevant tumor subtypes and omics signatures is an important task in cancer translational research for precision medicine. Large-scale genomic profiling studies such as The Cancer Genome Atlas (TCGA) Research Network have generated vast amounts of genomic, transcriptomic, epigenomic, and proteomic data. While these studies have provided great resources for researchers to discover clinically relevant tumor subtypes and driver molecular alterations, there are few computationally efficient methods and tools for integrative clustering analysis of these multi-type omics data. Therefore, the aim of this article is to develop a fully Bayesian latent variable method (called iClusterBayes) that can jointly model omics data of continuous and discrete data types for identification of tumor subtypes and relevant omics features. Specifically, the proposed method uses a few latent variables to capture the inherent structure of multiple omics data sets to achieve joint dimension reduction. As a result, the tumor samples can be clustered in the latent variable space and relevant omics features that drive the sample clustering are identified through Bayesian variable selection. This method significantly improve on the existing integrative clustering method iClusterPlus in terms of statistical inference and computational speed. By analyzing TCGA and simulated data sets, we demonstrate the excellent performance of the proposed method in revealing clinically meaningful tumor subtypes and driver omics features. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. The power of an integrated informatic and molecular approach to type 1 diabetes research.

    Science.gov (United States)

    Petrovsky, Nikolai; Silva, Diego

    2004-12-01

    Recent years have witnessed an explosive growth in available biological data. This includes a tremendous quantity of sequence data (e.g., biological structures, genetic and physical maps, pathways) generated by genome and transcriptome projects focused on humans, mice, and a multitude of other species. Diabetes research stands to greatly benefit from this data, which is distributed across public and private databases and the scientific literature. The increasing quantity and complexity of this biological data necessitates use of novel bioinformatics strategies for its efficient retrieval, analysis, and interpretation. Bioinformatic capability is becoming increasingly indispensable for fast and comprehensive analysis of biological data by diabetes researchers. There is great potential for diabetes scientists and clinicians to take advantage of recent bioinformatics and knowledge discovery developments to radically transform and advance this field of research. This paper will review advances in the field of bioinformatics relevant to diabetes research and preview a new specialty diabetes database, Diabetaeta, that we are creating to serve as a central bioinformatic portal for type 1 diabetes research, as well as serving as a public repository for beta cell gene and protein expression data.

  18. Special Issue on Advances in Integrated Energy Systems Design, Control and Optimization

    DEFF Research Database (Denmark)

    Anvari-Moghaddam, Amjad; Guerrero, Josep M.

    2017-01-01

    the multinational, national, community scales down to the building level) and future intelligent energy systems, which are able to incorporate an increasing amount of often fluctuating, renewable energy sources (RESs). It also increases the need for the integration of energy storage options into the energy mix......, not only to reduce the need for increased peak generation capacity, but also to enhance grid reliability and support higher penetration of RESs [2]. Moreover, this transformation is accommodating active participation of end-users as responsive prosumers at different scales, which in turn helps to reduce...

  19. Nationwide Buildings Energy Research enabled through an integrated Data Intensive Scientific Workflow and Advanced Analysis Environment

    Energy Technology Data Exchange (ETDEWEB)

    Kleese van Dam, Kerstin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lansing, Carina S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsethagen, Todd O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hathaway, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guillen, Zoe C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dirks, James A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Skorski, Daniel C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorrissen, Willy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorton, Ian [Carnegie Mellon Univ., Pittsburgh, PA (United States); Liu, Yan [Concordia Univ., Montreal, QC (Canada)

    2014-01-28

    Modern workflow systems enable scientists to run ensemble simulations at unprecedented scales and levels of complexity, allowing them to study system sizes previously impossible to achieve, due to the inherent resource requirements needed for the modeling work. However as a result of these new capabilities the science teams suddenly also face unprecedented data volumes that they are unable to analyze with their existing tools and methodologies in a timely fashion. In this paper we will describe the ongoing development work to create an integrated data intensive scientific workflow and analysis environment that offers researchers the ability to easily create and execute complex simulation studies and provides them with different scalable methods to analyze the resulting data volumes. The integration of simulation and analysis environments is hereby not only a question of ease of use, but supports fundamental functions in the correlated analysis of simulation input, execution details and derived results for multi-variant, complex studies. To this end the team extended and integrated the existing capabilities of the Velo data management and analysis infrastructure, the MeDICi data intensive workflow system and RHIPE the R for Hadoop version of the well-known statistics package, as well as developing a new visual analytics interface for the result exploitation by multi-domain users. The capabilities of the new environment are demonstrated on a use case that focusses on the Pacific Northwest National Laboratory (PNNL) building energy team, showing how they were able to take their previously local scale simulations to a nationwide level by utilizing data intensive computing techniques not only for their modeling work, but also for the subsequent analysis of their modeling results. As part of the PNNL research initiative PRIMA (Platform for Regional Integrated Modeling and Analysis) the team performed an initial 3 year study of building energy demands for the US Eastern

  20. Advanced reactor development: The LMR integral fast reactor program at Argonne

    International Nuclear Information System (INIS)

    Till, C.E.

    1990-01-01

    Reactor technology for the 21st Century must develop with characteristics that can now be seen to be important for the future, quite different from the things when the fundamental materials and design choices for present reactors were made in the 1950s. Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 3 figs

  1. Advanced batteries for load-leveling - The utility perspective on system integration

    Science.gov (United States)

    Delmonaco, J. L.; Lewis, P. A.; Roman, H. T.; Zemkoski, J.

    1982-09-01

    Rechargeable battery systems for applications as utility load-leveling units, particularly in urban areas, are discussed. Particular attention is given to advanced lead-acid, zinc-halogen, sodium-sulfer, and lithium-iron sulfide battery systems, noting that battery charging can proceed at light load hours and requires no fuel on-site. Each battery site will have a master site controller and related subsystems necessary for ensuring grid-quality power output from the batteries and charging when feasible. The actual interconnection with the grid is envisioned as similar to transmission, subtransmission, or distribution systems similar to cogeneration or wind-derived energy interconnections. Analyses are presented of factors influencing the planning economics, impacts on existing grids through solid-state converters, and operational and maintenance considerations. Finally, research directions towards large scale battery implementation are outlined.

  2. Metabolic tumor burden as marker of outcome in advanced EGFR wild-type NSCLC patients treated with erlotinib

    DEFF Research Database (Denmark)

    Winther-Larsen, Anne; Fledelius, Joan; Sorensen, Boe Sandahl

    2016-01-01

    OBJECTIVES: Accurate estimation of the prognosis of advanced non-small cell lung cancer (NSCLC) patients is essential before initiation of palliative treatment; especially in the second and third-line setting. This study was conducted in order to evaluate tumor burden measured on an 2'-deoxy-2......'-[18F] fluoro-D-glucose (F-18-FDG) positron emission tomography/computed tomography (PET/CT) scan as a marker of outcome in advanced epidermal growth factor receptor (EGFR) wild-type patients treated with second or third-line erlotinib.MATERIAL AND METHODS: Fifty-one patients were included from...... a prospectively collected cohort. An F-18-FDG-PET/CT scan was conducted prior to erlotinib treatment and tumor burden was measured in terms of metabolic tumor volume (MTV) and total lesion glycolysis (TLG). Median values of MTV and TLG were used for dichotomization of patients. Survival outcome was compared...

  3. The NASA Reanalysis Ensemble Service - Advanced Capabilities for Integrated Reanalysis Access and Intercomparison

    Science.gov (United States)

    Tamkin, G.; Schnase, J. L.; Duffy, D.; Li, J.; Strong, S.; Thompson, J. H.

    2017-12-01

    NASA's efforts to advance climate analytics-as-a-service are making new capabilities available to the research community: (1) A full-featured Reanalysis Ensemble Service (RES) comprising monthly means data from multiple reanalysis data sets, accessible through an enhanced set of extraction, analytic, arithmetic, and intercomparison operations. The operations are made accessible through NASA's climate data analytics Web services and our client-side Climate Data Services Python library, CDSlib; (2) A cloud-based, high-performance Virtual Real-Time Analytics Testbed supporting a select set of climate variables. This near real-time capability enables advanced technologies like Spark and Hadoop-based MapReduce analytics over native NetCDF files; and (3) A WPS-compliant Web service interface to our climate data analytics service that will enable greater interoperability with next-generation systems such as ESGF. The Reanalysis Ensemble Service includes the following: - New API that supports full temporal, spatial, and grid-based resolution services with sample queries - A Docker-ready RES application to deploy across platforms - Extended capabilities that enable single- and multiple reanalysis area average, vertical average, re-gridding, standard deviation, and ensemble averages - Convenient, one-stop shopping for commonly used data products from multiple reanalyses including basic sub-setting and arithmetic operations (e.g., avg, sum, max, min, var, count, anomaly) - Full support for the MERRA-2 reanalysis dataset in addition to, ECMWF ERA-Interim, NCEP CFSR, JMA JRA-55 and NOAA/ESRL 20CR… - A Jupyter notebook-based distribution mechanism designed for client use cases that combines CDSlib documentation with interactive scenarios and personalized project management - Supporting analytic services for NASA GMAO Forward Processing datasets - Basic uncertainty quantification services that combine heterogeneous ensemble products with comparative observational products (e

  4. A non-local problem for a loaded mixed-type equation with a integral operator

    Directory of Open Access Journals (Sweden)

    Obidjon Kh. Abdullayev

    2016-06-01

    Full Text Available We study the existence and uniqueness of the solution of non-local boundary value problem for the loaded elliptic-hyperbolic equation $$ u_{xx} + \\mathop{\\mathrm{sgn}} (y u_{yy} + \\frac{1 - \\mathop{\\mathrm{sgn}} (y}{2} \\sum\\limits_{k = 1}^n {R_k}(x, u(x, 0 = 0 $$ with integral operator $$ {R_k}(x, u(x, 0 = \\{ \\begin{array}{lc} {p_k}(xD_{x  1}^{ - {\\alpha _k}}u(x, 0, & q \\le x \\le 1, [2mm] {r_k}(xD_{ - 1 x}^{ - {\\beta _k}}u(x, 0, & - 1 \\le x \\le - q, \\end{array} . $$ where $$ \\begin{array}{l} \\displaystyle D_{ax}^{ - {\\alpha _k}}f(x = \\frac{1}{{\\Gamma ({\\alpha _k}}} \\int _a^x \\frac{f(t}{(x - t^{1-{\\alpha _k} }}dt, \\displaystyle D_{xb}^{ - {\\beta _k}}f(x = \\frac{1}{{\\Gamma ({\\beta _k}}} \\int _x^b \\frac{f(t}{(t - x^{1-{\\beta _k}}}dt , \\end{array} $$ in double-connected domain $\\Omega $, bounded with two lines: $$ \\sigma _1: x^2 + y^2 = 1,\\quad \\sigma _2: x^2 + y^2 = q^2 \\quad at $y > 0$,$$ and characteristics: $$ A_j C_1: x + ( - 1^j y = ( - 1^{j + 1},\\quad B_j C_2: x + ( - 1^j y = ( - 1^{j + 1} \\cdot q$$ of the considered equation at $y 0$. Uniqueness of the solution of investigated problem was proved by an extremum principle for the mixed type equations. Thus we need to prove that, the loaded part of the equation is identically equal to zero if considerate problem is homogeneous. Existence of the solution of the problem was proved by a method of the integral equations, thus the theory of the singular integral equations and Fredholm integral equations of the second kind were widely used.

  5. Asymptotically Stable Solutions of a Generalized Fractional Quadratic Functional-Integral Equation of Erdélyi-Kober Type

    Directory of Open Access Journals (Sweden)

    Mohamed Abdalla Darwish

    2014-01-01

    Full Text Available We study a generalized fractional quadratic functional-integral equation of Erdélyi-Kober type in the Banach space BC(ℝ+. We show that this equation has at least one asymptotically stable solution.

  6. Asymptotically Stable Solutions of a Generalized Fractional Quadratic Functional-Integral Equation of Erdélyi-Kober Type

    OpenAIRE

    Darwish, Mohamed Abdalla; Rzepka, Beata

    2014-01-01

    We study a generalized fractional quadratic functional-integral equation of Erdélyi-Kober type in the Banach space BC(ℝ+). We show that this equation has at least one asymptotically stable solution.

  7. On Hermite-Hadamard Type Inequalities for Riemann-Liouville Fractional Integrals via Two Kinds of Convexity

    Directory of Open Access Journals (Sweden)

    Feixiang Chen

    2014-01-01

    Full Text Available We obtain some Hermite-Hadamard type inequalities for products of two m-convex functions via Riemann-Liouville integrals. The analogous results for (α,m-convex functions are also established.

  8. The Evaluation of the Error Term in Some Gauss-Type Formulae for the Approximation of Cauchy Principal Value Integrals

    Science.gov (United States)

    Smith, H. V.

    2008-01-01

    A method is derived for the numerical evaluation of the error term arising in some Gauss-type formulae modified so as to approximate Cauchy Principal Value integrals. The method uses Chebyshev polynomials of the first kind. (Contains 1 table.)

  9. Measure and integration an advanced course in basic procedures and applications

    CERN Document Server

    König, Heinz

    1997-01-01

    This book sets out to restructure certain fundamentals in measure and integration theory, and thus to fee the theory from some notorious drawbacks. It centers around the ubiquitous task of producing appropriate contents and measures from more primitive data, in order to extend elementary contents and to represent elementary integrals. This task has not been met with adequate unified means so far. The traditional main tools, the Carathéodory and Daniell-Stone theorems, are too restrictive and had to be supplemented by other ad-hoc procedures. Around 1970 a new approach emerged, based on the notion of regularity, which in traditional measure theory is linked to topology. The present book develops the new approach into a systematic theory. The theory unifies the entire context and is much more powerful than the former means. It has striking implications all over measure theory and beyond. Thus it extends the Riesz representation theorem in terms of Randon measures from locally compact to arbitrary Hausdorff top...

  10. Recent advances in nanoplasmonic biosensors: applications and lab-on-a-chip integration

    Science.gov (United States)

    Lopez, Gerardo A.; Estevez, M.-Carmen; Soler, Maria; Lechuga, Laura M.

    2017-01-01

    Motivated by the recent progress in the nanofabrication field and the increasing demand for cost-effective, portable, and easy-to-use point-of-care platforms, localized surface plasmon resonance (LSPR) biosensors have been subjected to a great scientific interest in the last few years. The progress observed in the research of this nanoplasmonic technology is remarkable not only from a nanostructure fabrication point of view but also in the complete development and integration of operative devices and their application. The potential benefits that LSPR biosensors can offer, such as sensor miniaturization, multiplexing opportunities, and enhanced performances, have quickly positioned them as an interesting candidate in the design of lab-on-a-chip (LOC) optical biosensor platforms. This review covers specifically the most significant achievements that occurred in recent years towards the integration of this technology in compact devices, with views of obtaining LOC devices. We also discuss the most relevant examples of the use of the nanoplasmonic biosensors for real bioanalytical and clinical applications from assay development and validation to the identification of the implications, requirements, and challenges to be surpassed to achieve fully operative devices.

  11. Recent advances in nanoplasmonic biosensors: applications and lab-on-a-chip integration

    Directory of Open Access Journals (Sweden)

    Lopez Gerardo A.

    2016-08-01

    Full Text Available Motivated by the recent progress in the nanofabrication field and the increasing demand for cost-effective, portable, and easy-to-use point-of-care platforms, localized surface plasmon resonance (LSPR biosensors have been subjected to a great scientific interest in the last few years. The progress observed in the research of this nanoplasmonic technology is remarkable not only from a nanostructure fabrication point of view but also in the complete development and integration of operative devices and their application. The potential benefits that LSPR biosensors can offer, such as sensor miniaturization, multiplexing opportunities, and enhanced performances, have quickly positioned them as an interesting candidate in the design of lab-on-a-chip (LOC optical biosensor platforms. This review covers specifically the most significant achievements that occurred in recent years towards the integration of this technology in compact devices, with views of obtaining LOC devices. We also discuss the most relevant examples of the use of the nanoplasmonic biosensors for real bioanalytical and clinical applications from assay development and validation to the identification of the implications, requirements, and challenges to be surpassed to achieve fully operative devices.

  12. Advanced Stirling Convertor Control Unit Testing at NASA Glenn Research Center in the Radioisotope Power Systems System Integration Laboratory

    Science.gov (United States)

    Dugala, Gina M.; Taylor, Linda M.; Kussmaul, Michael; Casciani, Michael; Brown, Gregory; Wiser, Joel

    2017-01-01

    Future NASA missions could include establishing Lunar or Martian base camps, exploring Jupiters moons and travelling beyond where generating power from sunlight may be limited. Radioisotope Power Systems (RPS) provide a dependable power source for missions where inadequate sunlight or operational requirements make other power systems impractical. Over the past decade, NASA Glenn Research Center (GRC) has been supporting the development of RPSs. The Advanced Stirling Radioisotope Generator (ASRG) utilized a pair of Advanced Stirling Convertors (ASC). While flight development of the ASRG has been cancelled, much of the technology and hardware continued development and testing to guide future activities. Specifically, a controller for the convertor(s) is an integral part of a Stirling-based RPS. For the ASRG design, the controller maintains stable operation of the convertors, regulates the alternating current produced by the linear alternator of the convertor, provides a specified direct current output voltage for the spacecraft, synchronizes the piston motion of the two convertors in order to minimize vibration as well as manage and maintain operation with a stable piston amplitude and hot end temperature. It not only provides power to the spacecraft but also must regulate convertor operation to avoid damage to internal components and maintain safe thermal conditions after fueling. Lockheed Martin Coherent Technologies has designed, developed and tested an Engineering Development Unit (EDU) Advanced Stirling Convertor Control Unit (ACU) to support this effort. GRC used the ACU EDU as part of its non-nuclear representation of a RPS which also consists of a pair of Dual Advanced Stirling Convertor Simulator (DASCS), and associated support equipment to perform a test in the Radioisotope Power Systems System Integration Laboratory (RSIL). The RSIL was designed and built to evaluate hardware utilizing RPS technology. The RSIL provides insight into the electrical

  13. P-type CuxS thin films: Integration in a thin film transistor structure

    International Nuclear Information System (INIS)

    Nunes de Carvalho, C.; Parreira, P.; Lavareda, G.; Brogueira, P.; Amaral, A.

    2013-01-01

    Cu x S thin films, 80 nm thick, are deposited by vacuum thermal evaporation of sulfur-rich powder mixture, Cu 2 S:S (50:50 wt.%) with no intentional heating of the substrate. The process of deposition occurs at very low deposition rates (0.1–0.3 nm/s) to avoid the formation of Cu or S-rich films. The evolution of Cu x S films surface properties (morphology/roughness) under post deposition mild annealing in air at 270 °C and their integration in a thin film transistor (TFT) are the main objectives of this study. Accordingly, Scanning Electron Microscopy studies show Cu x S films with different surface morphologies, depending on the post deposition annealing conditions. For the shortest annealing time, the Cu x S films look to be constructed of grains with large dimension at the surface (approximately 100 nm) and consequently, irregular shape. For the longest annealing time, films with a fine-grained surface are found, with some randomly distributed large particles bound to this fine-grained surface. Atomic Force Microscopy results indicate an increase of the root-mean-square roughness of Cu x S surface with annealing time, from 13.6 up to 37.4 nm, for 255 and 345 s, respectively. The preliminary integration of Cu x S films in a TFT bottom-gate type structure allowed the study of the feasibility and compatibility of this material with the remaining stages of a TFT fabrication as well as the determination of the p-type characteristic of the Cu x S material. - Highlights: • Surface properties of annealed Cu x S films. • Variation of conductivity with annealing temperatures of Cu x S films. • Application of evaporated Cu x S films in a thin film transistor (TFT) structure. • Determination of Cu x S p-type characteristic from TFT behaviour

  14. Toward an integrative account of social cognition: marrying theory of mind and interactionism to study the interplay of Type 1 and Type 2 processes

    Science.gov (United States)

    Bohl, Vivian; van den Bos, Wouter

    2012-01-01

    Traditional theory of mind (ToM) accounts for social cognition have been at the basis of most studies in the social cognitive neurosciences. However, in recent years, the need to go beyond traditional ToM accounts for understanding real life social interactions has become all the more pressing. At the same time it remains unclear whether alternative accounts, such as interactionism, can yield a sufficient description and explanation of social interactions. We argue that instead of considering ToM and interactionism as mutually exclusive opponents, they should be integrated into a more comprehensive account of social cognition. We draw on dual process models of social cognition that contrast two different types of social cognitive processing. The first type (labeled Type 1) refers to processes that are fast, efficient, stimulus-driven, and relatively inflexible. The second type (labeled Type 2) refers to processes that are relatively slow, cognitively laborious, flexible, and may involve conscious control. We argue that while interactionism captures aspects of social cognition mostly related to Type 1 processes, ToM is more focused on those based on Type 2 processes. We suggest that real life social interactions are rarely based on either Type 1 or Type 2 processes alone. On the contrary, we propose that in most cases both types of processes are simultaneously involved and that social behavior may be sustained by the interplay between these two types of processes. Finally, we discuss how the new integrative framework can guide experimental research on social interaction. PMID:23087631

  15. Recent Advances in Type-2-Cell-Mediated Immunity: Insights from Helminth Infection.

    Science.gov (United States)

    Harris, Nicola L; Loke, P'ng

    2017-12-19

    Type-2-cell-mediated immune responses play a critical role in mediating both host-resistance and disease-tolerance mechanisms during helminth infections. Recently, type 2 cell responses have emerged as major regulators of tissue repair and metabolic homeostasis even under steady-state conditions. In this review, we consider how studies of helminth infection have contributed toward our expanding cellular and molecular understanding of type-2-cell-mediated immunity, as well as new areas such as the microbiome. By studying how these successful parasites form chronic infections without overt pathology, we are gaining additional insights into allergic and inflammatory diseases, as well as normal physiology. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Conventional and advanced implant treatment in the type II diabetic patient: surgical protocol and long-term clinical results.

    Science.gov (United States)

    Tawil, Georges; Younan, Roland; Azar, Pierre; Sleilati, Ghassan

    2008-01-01

    To investigate the effect of type-2 diabetes on implant survival and complication rate. Prospective study enrolling type-2 diabetic patients suffering from edentulism, having a mean perioperative HbA1c level of 7.2%, and compliant with a maintenance program. All the patients underwent dental and periodontal examinations and had laboratory testing for HbA1c, fasting plasma glucose, blood lipids, and microalbuminuria. Nondiabetic patients matched for implant treatment indication served as controls. The influence of clinical diabetes-related factors and periodontal parameters (Plaque Index, bleeding on probing, probing depth) on implant survival were assessed via univariate then multivariate methods. Forty-five diabetic patients, followed for 1 to 12 years, mean age 64.7 years, received 255 implants: 143 following a classical protocol and 112 in cases of sinus floor elevation, immediate loading, and guided bone regeneration. Forty-five nondiabetic control patients received 244 implants: 142 following a classical protocol and 102 in cases of advanced surgery. Implant survival following conventional or advanced implant therapy was not statistically different between the well-controlled (HbA1c diabetic group was 97.2% (control 98.8%) and was not significantly different for age, gender, diabetes duration, smoking, or type of hypoglycemic therapy. The mean peri-implant bone loss was 0.41 +/- 0.58 mm (control, 0.49 +/- 0.64 mm). PI and BOP fairly correlated with postoperative complications. HbA1c was the only multivariate independent factor affecting the complication rate (P = .04). No statistically significant difference was found for patients (P = .81) or for implants (P = .66) for the advanced surgery cases or the conventional approach in diabetic patients compared to nondiabetic patients.

  17. An Integrative Review of Self-Efficacy Measurement Instruments in Youth with Type 1 Diabetes (T1DM)

    Science.gov (United States)

    Rasbach, Lisa; Jenkins, Carolyn; Laffel, Lori

    2014-01-01

    Purpose The purpose of this study is to assess the extant literature on instruments used to measure self-efficacy in youth with type 1 diabetes (T1DM) and their caregivers and to critically evaluate these measurements. Methods An integrative review (2003–2013) was conducted searching PsycINFO, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and U.S. National Library of Medicine PubMed service (PubMed) databases using key words diabetes, type 1 diabetes, and self-efficacy. The authors reviewed the resulting294 references for inclusion criteria of (a) sample of youth with T1DM or sample of caregivers of youth with T1DM, (b) description of the self-efficacy instrument as primary research, and (c) the instrument measured self-efficacy specifically related to diabetes management. Forty-five articles out of the initial 294 met criteria. Results Of the 45 articles, 10 different self-efficacy instruments were identified. The primary theoretical framework used was Bandura’s social cognitive theory and model of self-efficacy. Most participants were white middle class T1DM youth. Evaluations to assess validity often were not reported; however, a majority of studies reported high internal consistency of the instruments. Conclusions Sample homogeneity could limit the applicability of results to certain patient populations. Further psychometric analysis, including validity assessments, should be conducted in more diverse samples. Development of valid and reliable instruments for measuring self-efficacy that are sensitive to change across a wider caregiver base over time is necessary. While this review examined reliable and valid instruments used in research, future opportunities include evaluation of measuring self-efficacy in T1DM youth exposed to recent advances in diabetes management technologies. PMID:25216655

  18. Use of Simulation to Integrate Cultural Humility Into Advanced Health Assessment for Nurse Practitioner Students.

    Science.gov (United States)

    Ndiwane, Abraham N; Baker, Nancy C; Makosky, Antonia; Reidy, Patricia; Guarino, Anthony J

    2017-09-01

    Increasing cultural humility among nursing students requires the application of knowledge and skills. The integration of an Objective Structured Clinical Examination (OSCE) offered nurse practitioner students practice in simulation. This learning activity included pre- and postassessments of knowledge regarding cultural issues and level of student satisfaction. Course content included an exemplar video and a simulation interview with an African American standardized patient. Of the 65 students enrolled, 97% completed OSCE interviews and 81% completed pre- and postsurveys. A 2-domain 3 × 2-time within-subjects ANOVA indicated a statistically significant interaction effect, reinforced by descriptive statistics. Follow-up paired t tests detected a significantly large knowledge increase. Standardized patient scenarios scored highest for satisfaction, followed by critical thinking, and with self-confidence scoring lowest. The favorable knowledge outcomes from this teaching intervention support future applications of OSCE methodology for teaching sensitive cross-cultural content. [J Nurs Educ. 2017;56(9):567-571.]. Copyright 2017, SLACK Incorporated.

  19. Advancing Coordination Between DRM and CCA in Integrated Flood Risk Management

    DEFF Research Database (Denmark)

    Jebens, Martin; Sørensen, Carlo Sass

    Flood hazards in coastal regions induce risks toward lives, property, economy and the environment. In need of sustainable and holistic actions to reduce risks, these should include innovative Disaster Risk Management (DRM) and Climate Change Adaptation (CCA) measures. While differing on important...... parameters such as political commitment, awareness and uncertainty of the hazard/risk, commonalities between DRM and CCA can also be identified that affect human settlement, institutional adaptation, and the economy. This supports coordination of mitigation and adaptation measures to create resilience...... lack of planning and awareness. This, we argue, may be the golden opportunity to improve the national DRM-CCA integration. Past coastal risk mitigation and adaptation in Denmark only focused on structural measures. Due to a long coastline this is neither a sustainable nor an economically feasible...

  20. Advancing Coordination Between DRM and CCA in Integrated Flood Risk Management

    DEFF Research Database (Denmark)

    Flood hazards in coastal regions induce risks toward lives, property, economy and the environment. In need of sustainable and holistic actions to reduce risks, these should include innovative Disaster Risk Management (DRM) and Climate Change Adaptation (CCA) measures. While differing on important...... parameters such as political commitment, awareness and uncertainty of the hazard/risk, commonalities between DRM and CCA can also be identified that affect human settlement, institutional adaptation, and the economy. This supports coordination of mitigation and adaptation measures to create resilience...... lack of planning and awareness. This, we argue, may be the golden opportunity to improve the national DRM-CCA integration. Past coastal risk mitigation and adaptation in Denmark only focused on structural measures. Due to its long coastline this is neither a sustainable nor an economically feasible...

  1. Methodology for the Integration of Safety in the Optimization of the Advanced Reactors Design

    International Nuclear Information System (INIS)

    Grinblat, P.; Schlamp, M.; Brasnarof, D.; Gimenez, M.

    2003-01-01

    In this work a new methodology has been developed and implemented for taking into account the safety levels of the reactor in a design optimization process, by using Design Maps.They represent a new technique for comparing critical variables in case an accidental sequenced happened, with limit values set by the design criteria.So a good balance is achieved, without allowing the economic performance search to cause a too risky reactor, and guaranteeing the competitiveness of it in spite of the safety costs.Up to the moment, there is no design tool able to accomplish this task in an integrated way.A computational tool based on this methodology has been implemented.These tool specially programmed routines allow carrying out the mentioned tasks

  2. Advancing Coordination Between DRM and CCA in Integrated Flood Risk Management

    DEFF Research Database (Denmark)

    Jebens, Martin; Sørensen, Carlo Sass

    Flood hazards in coastal regions induce risks toward lives, property, economy and the environment. In need of sustainable and holistic actions to reduce risks, these should include innovative Disaster Risk Management (DRM) and Climate Change Adaptation (CCA) measures. While differing on important...... and sustainable solutions that take into account present and future outcomes. Adaptation must be integrated in existing policy making and be a planning process priority to become effective, however. In relation to coastal hazards in Denmark, deficits are identified in how DRM is brought into effect, e.g. though...... recent flood events to exert pressure on the national government, and in a top-down approach the government could identify the needs among the civil society to include these in the decision-making process....

  3. Integration and Exploitation of Advanced Visualization and Data Technologies to Teach STEM Subjects

    Science.gov (United States)

    Brandon, M. A.; Garrow, K. H.

    2014-12-01

    We live in an age where the volume of content available online to the general public is staggering. Integration of data from new technologies gives us amazing educational opportunities when appropriate narratives are provided. We prepared a distance learning credit bearing module that showcased many currently available data sets and state of the art technologies. It has been completed by many thousands of students with good feedback. Module highlights were the wide ranging and varied online activities which taught a wide range of STEM content. For example: it is well known that on Captain Scott's Terra Nova Expedition 1910-13, three researchers completed the "the worst journey in the world" to study emperor penguins. Using their primary records and clips from location filmed television documentaries we can tell their story and the reasons why it was important. However using state of the art content we can go much further. Using satellite data students can trace the path the researchers took and observe the penguin colony that they studied. Linking to modern Open Access literature students learn how they can estimate the numbers of animals in this and similar locations. Then by linking to freely available data from Antarctic Automatic Weather Stations students can learn quantitatively about the climatic conditions the animals are enduring in real time. They can then download and compare this with the regional climatic record to see if their observations are what could be expected. By considering the environment the penguins live in students can be taught about the evolutionary and behavioural adaptations the animals have undergone to survive. In this one activity we can teach a wide range of key learning points in an engaging and coherent way. It opened some students' eyes to the range of possibilities available to learn about our, and other planets. The addition and integration of new state of the art techniques and data sets only increases the opportunities to

  4. Advancing the integration of spatial data to map human and natural drivers on coral reefs.

    Science.gov (United States)

    Wedding, Lisa M; Lecky, Joey; Gove, Jamison M; Walecka, Hilary R; Donovan, Mary K; Williams, Gareth J; Jouffray, Jean-Baptiste; Crowder, Larry B; Erickson, Ashley; Falinski, Kim; Friedlander, Alan M; Kappel, Carrie V; Kittinger, John N; McCoy, Kaylyn; Norström, Albert; Nyström, Magnus; Oleson, Kirsten L L; Stamoulis, Kostantinos A; White, Crow; Selkoe, Kimberly A

    2018-01-01

    A major challenge for coral reef conservation and management is understanding how a wide range of interacting human and natural drivers cumulatively impact and shape these ecosystems. Despite the importance of understanding these interactions, a methodological framework to synthesize spatially explicit data of such drivers is lacking. To fill this gap, we established a transferable data synthesis methodology to integrate spatial data on environmental and anthropogenic drivers of coral reefs, and applied this methodology to a case study location-the Main Hawaiian Islands (MHI). Environmental drivers were derived from time series (2002-2013) of climatological ranges and anomalies of remotely sensed sea surface temperature, chlorophyll-a, irradiance, and wave power. Anthropogenic drivers were characterized using empirically derived and modeled datasets of spatial fisheries catch, sedimentation, nutrient input, new development, habitat modification, and invasive species. Within our case study system, resulting driver maps showed high spatial heterogeneity across the MHI, with anthropogenic drivers generally greatest and most widespread on O'ahu, where 70% of the state's population resides, while sedimentation and nutrients were dominant in less populated islands. Together, the spatial integration of environmental and anthropogenic driver data described here provides a first-ever synthetic approach to visualize how the drivers of coral reef state vary in space and demonstrates a methodological framework for implementation of this approach in other regions of the world. By quantifying and synthesizing spatial drivers of change on coral reefs, we provide an avenue for further research to understand how drivers determine reef diversity and resilience, which can ultimately inform policies to protect coral reefs.

  5. Advancing the integration of spatial data to map human and natural drivers on coral reefs

    Science.gov (United States)

    Gove, Jamison M.; Walecka, Hilary R.; Donovan, Mary K.; Williams, Gareth J.; Jouffray, Jean-Baptiste; Crowder, Larry B.; Erickson, Ashley; Falinski, Kim; Friedlander, Alan M.; Kappel, Carrie V.; Kittinger, John N.; McCoy, Kaylyn; Norström, Albert; Nyström, Magnus; Oleson, Kirsten L. L.; Stamoulis, Kostantinos A.; White, Crow; Selkoe, Kimberly A.

    2018-01-01

    A major challenge for coral reef conservation and management is understanding how a wide range of interacting human and natural drivers cumulatively impact and shape these ecosystems. Despite the importance of understanding these interactions, a methodological framework to synthesize spatially explicit data of such drivers is lacking. To fill this gap, we established a transferable data synthesis methodology to integrate spatial data on environmental and anthropogenic drivers of coral reefs, and applied this methodology to a case study location–the Main Hawaiian Islands (MHI). Environmental drivers were derived from time series (2002–2013) of climatological ranges and anomalies of remotely sensed sea surface temperature, chlorophyll-a, irradiance, and wave power. Anthropogenic drivers were characterized using empirically derived and modeled datasets of spatial fisheries catch, sedimentation, nutrient input, new development, habitat modification, and invasive species. Within our case study system, resulting driver maps showed high spatial heterogeneity across the MHI, with anthropogenic drivers generally greatest and most widespread on O‘ahu, where 70% of the state’s population resides, while sedimentation and nutrients were dominant in less populated islands. Together, the spatial integration of environmental and anthropogenic driver data described here provides a first-ever synthetic approach to visualize how the drivers of coral reef state vary in space and demonstrates a methodological framework for implementation of this approach in other regions of the world. By quantifying and synthesizing spatial drivers of change on coral reefs, we provide an avenue for further research to understand how drivers determine reef diversity and resilience, which can ultimately inform policies to protect coral reefs. PMID:29494613

  6. Developing a common framework for integrated solid waste management advances in Managua, Nicaragua.

    Science.gov (United States)

    Olley, Jane E; IJgosse, Jeroen; Rudin, Victoria; Alabaster, Graham

    2014-09-01

    This article describes the municipal solid waste management system in Managua, Nicaragua. It updates an initial profile developed by the authors for the 2010 UN-HABITAT publication Solid Waste Management in the World's Cities and applies the methodology developed in that publication. In recent years, the municipality of Managua has been the beneficiary of a range of international cooperation projects aimed at improving municipal solid waste management in the city. The article describes how these technical assistance and infrastructure investments have changed the municipal solid waste management panorama in the city and analyses the sustainability of these changes. The article concludes that by working closely with the municipal government, the UN-HABITAT project Strengthening Capacities for Solid Waste Management in Managua was able to unite these separate efforts and situate them within a strategic framework to guide the evolution of the municipal solid waste management system in the forthcoming years. The creation of this multi-stakeholder platform allowed for the implementation of joint activities and ensured coherence in the products generated by the different projects. This approach could be replicated in other cities and in other sectors with similar effect. Developing a long term vision was essential for the advancement of municipal solid waste management in the city. Nevertheless, plan implementation may still be undermined by the pressures of the short term municipal administrative government, which emphasize operational over strategic investment. © The Author(s) 2014.

  7. Retinal blood flow is increased in type 1 diabetes mellitus patients with advanced stages of retinopathy

    NARCIS (Netherlands)

    Nguyen, Hoang-Ton; van Duinkerken, Eelco; Verbraak, Frank D.; Polak, Bettine C. P.; Ringens, Peter J.; Diamant, Michaela; Moll, Annette C.

    2016-01-01

    Diabetic retinopathy (DRP) is a common microvascular complication seen in patients with type 1 diabetes mellitus (T1DM). The effects of T1DM and concomitant (proliferative) DRP on retinal blood flow are currently unclear. Therefore, we measured retinal vascular blood flow in T1DM patients with and

  8. The Relationship between Iranian EFL Advanced Learners' Personality Types, Motivation and Language Learning Success

    Directory of Open Access Journals (Sweden)

    Marzieh Ebrahimi

    2016-05-01

    Full Text Available Affective factors are the most important factors in SLA and EFL studies. These factors include motivation, self-confidence, anxiety, etc. Researches on learners’ characteristics have been investigated for over a century. In the same vein, the present research, strived at exploring Iranian’s EFL learners personality types and motivation. In the article, the personality types and motivation of students were examined using Myers-Briggs Type Indicator (MBTI and motivation questionnaire of Laine. For this purpose, 60 EFL students from one of the language institutions Mashhad (located in Iran were chosen as  the participants of this study. Through two instruments and considering the participants’ previous semester scores, the data were gathered and analyzed by means of SPSS software. The correctional analyses revealed a significant relationship among motivation, personality and students’ success. Multiple regression analysis was also conducted to examine the strength of the relationship among the variables. Among the affective factors, personality type was found to be the best predictor of students’ success. The study provides some pedagogical implications and suggestions for future research.

  9. An application of oscillation-damped motion for suspended payloads to the advanced integrated maintenance system in fuel cycle facilities

    International Nuclear Information System (INIS)

    Noakes, M.W.; Petterson, B.J.; Werner, J.C.

    1990-01-01

    The transportation of objects using overhead cranes can induce pendular motion of the object, which usually must be damped or allowed to decay before the next process can take place. Recent work at Sandia National Laboratories has shown that oscillation-damped transport and swing-free stops are possible by properly programming the acceleration of the transporting crane. Initial studies have been completed using a CIMCORP XR6100 gantry robot. The Advanced Integrated Maintenance System (AIMS) is an engineering and operations test bed developed for remote maintenance and handling studies within the Consolidated Fuel Reprocessing Program (CFRP) at Oak Ridge National Laboratory. The goal of CFRP has been to advanced the technology of in-cell systems planned for future nuclear fuel cycle facilities. The AIMS provides the capabilities to examine the needs and constraints necessary for hot-cell remote maintenance and includes a force-reflecting master/slave teleoperator and overhead transporter system. The associated control system provides a flexible programming environment conducive to controls experimentation. This paper reviews the theory associated with oscillation-damped trajectories for simply suspended objects and describes a specific implementation of the oscillation damping methods for the AIMS transporter. Hardware and software requirements and constraints for proper operation are discussed

  10. Automated, Miniaturized and Integrated Quality Control-on-Chip (QC-on-a-Chip for Advanced Cell Therapy Applications

    Directory of Open Access Journals (Sweden)

    David eWartmann

    2015-09-01

    Full Text Available The combination of microfabrication-based technologies with cell biology has laid the foundation for the development of advanced in vitro diagnostic systems capable of evaluating cell cultures under defined, reproducible and standardizable measurement conditions. In the present review we describe recent lab-on-a-chip developments for cell analysis and how these methodologies could improve standard quality control in the field of manufacturing cell-based vaccines for clinical purposes. We highlight in particular the regulatory requirements for advanced cell therapy applications using as an example dendritic cell-based cancer vaccines to describe the tangible advantages of microfluidic devices that overcome most of the challenges associated with automation, miniaturization and integration of cell-based assays. As its main advantage lab-on-a-chip technology allows for precise regulation of culturing conditions, while simultaneously monitoring cell relevant parameters using embedded sensory systems. State-of-the-art lab-on-a-chip platforms for in vitro assessment of cell cultures and their potential future applications for cell therapies and cancer immunotherapy are discussed in the present review.

  11. Advanced Environmental Barrier Coating and SA Tyrannohex SiC Composites Integration for Improved Thermomechanical and Environmental Durability

    Science.gov (United States)

    Zhu, Dongming; Halbig, Michael; Singh, Mrityunjay

    2018-01-01

    The development of 2700 degF capable environmental barrier coating (EBC) systems, particularly, the Rare Earth "Hafnium" Silicon bond coat systems, have significantly improved the temperature capability and environmental stability of SiC/SiC Ceramic Matrix Composite Systems. We have specifically developed the advanced 2700 degF EBC systems, integrating the EBC to the high temperature SA Tyrannohex SiC fiber composites, for comprehensive performance and durability evaluations for potential turbine engine airfoil component applications. The fundamental mechanical properties, environmental stability and thermal gradient cyclic durability performance of the EBC - SA Tyrannohex composites were investigated. The paper will particularly emphasize the high pressure combustion rig recession, cyclic thermal stress resistance and thermomechanical low cycle fatigue testing of uncoated and environmental barrier coated Tyrannohex SiC SA composites in these simulated turbine engine combustion water vapor, thermal gradients, and mechanical loading conditions. We have also investigated high heat flux and flexural fatigue degradation mechanisms, determined the upper limits of operating temperature conditions for the coated SA composite material systems in thermomechanical fatigue conditions. Recent progress has also been made by using the self-healing rare earth-silicon based EBCs, thus enhancing the SA composite hexagonal fiber columns bonding for improved thermomechanical and environmental durability in turbine engine operation environments. More advanced EBC- composite systems based on the new EBC-Fiber Interphases will also be discussed.

  12. Development of Integrated Real-Time Control of Internal Transport Barriers in Advanced Operation Scenarios on JET

    International Nuclear Information System (INIS)

    Moreau, D.; Crisanti, F.; Laborde, L.

    2005-01-01

    An important experimental programme is in progress on JET to investigate plasma control schemes which, with a limited number of actuators, could eventually enable ITER to sustain steady state burning plasmas in an 'advanced tokamak' operation scenario. A multi-variable model-based technique was recently developed for the simultaneous control of several plasma parameter profiles in discharges with internal transport barriers (ITB), using lower hybrid current drive (LHCD) together with neutral beam injection (NBI) and ion cyclotron resonance heating (ICRH). The proposed distributed-parameter control scheme relies on the experimental identification of an integral linear response model operator and retains the intrinsic couplings between the plasma parameter profiles. A first set of experiments was performed to control the current density profile in the low-density/low-power LH-driven phase of the JET advanced scenarios, using only one actuator (LHCD) and a simplified (lumped-parameter) version of the control scheme. Several requested steady state magnetic equilibria were thus obtained and sustained for about 7s, up to full relaxation of the ohmic current throughout the plasma. A second set of experiments was dedicated to the control of the q-profile with 3 actuators (LHCD, NBI and ICRH) during the intense heating phase of advanced scenarios. The safety factor profile was also shown to approach a requested profile within about 5s. The achieved plasma equilibrium was close to steady state. Finally, during the recent high power experimental campaign, experiments have been conducted in a 3T/1.7MA plasma, achieving the simultaneous control of the current density and electron temperature profiles in ITB plasmas. Here, the distributed-parameter version of the algorithm was used for the first time, again with 3 actuators. Real-time control was applied during 7s, and allowed to reach successfully different target q-profiles (monotonic and reversed-shear ones) and different ITB

  13. Integrated methodological frameworks for modelling agent-based advanced supply chain planning systems: A systematic literature review

    Directory of Open Access Journals (Sweden)

    Luis Antonio Santa-Eulalia

    2011-12-01

    Full Text Available Purpose: The objective of this paper is to provide a systematic literature review of recent developments in methodological frameworks for the modelling and simulation of agent-based advanced supply chain planning systems.Design/methodology/approach: A systematic literature review is provided to identify, select and make an analysis and a critical summary of all suitable studies in the area. It is organized into two blocks: the first one covers agent-based supply chain planning systems in general terms, while the second one specializes the previous search to identify those works explicitly containing methodological aspects.Findings: Among sixty suitable manuscripts identified in the primary literature search, only seven explicitly considered the methodological aspects. In addition, we noted that, in general, the notion of advanced supply chain planning is not considered unambiguously, that the social and individual aspects of the agent society are not taken into account in a clear manner in several studies and that a significant part of the works are of a theoretical nature, with few real-scale industrial applications. An integrated framework covering all phases of the modelling and simulation process is still lacking in the literature visited.Research limitations/implications: The main research limitations are related to the period covered (last four years, the selected scientific databases, the selected language (i.e. English and the use of only one assessment framework for the descriptive evaluation part.Practical implications: The identification of recent works in the domain and discussion concerning their limitations can help pave the way for new and innovative researches towards a complete methodological framework for agent-based advanced supply chain planning systems.Originality/value: As there are no recent state-of-the-art reviews in the domain of methodological frameworks for agent-based supply chain planning, this paper contributes to

  14. Advances in prenatal screening for Down syndrome: II first trimester testing, integrated testing, and future directions.

    Science.gov (United States)

    Benn, Peter A

    2002-10-01

    The acceptability of prenatal screening and diagnosis of Down syndrome is dependent, in part, on the gestational age at which the testing is offered. First trimester screening could be advantageous if it has sufficient efficacy and can be effectively delivered. Two first trimester maternal serum screening markers, pregnancy-associated plasma protein-A (PAPP-A) and free beta-human chorionic gonadotropin (beta-hCG), are useful for identifying women at increased risk for fetal Down syndrome. In addition, measurement of an enlarged thickness of the subcutaneous fluid-filled space at the back of the neck of the developing fetus (referred to as nuchal translucency or NT) has been demonstrated to be an indicator for these high-risk pregnancies. When these three parameters are combined, estimates for Down syndrome efficacy exceed those currently attainable in the second trimester. Women who are screen-positive in the first trimester can elect to receive cytogenetic testing of a chorionic villus biopsy. The first trimester tests could also, theoretically, be combined with the second trimester maternal serum screening tests (integrated screening) to obtain even higher levels of efficacy. There are, however, several practical limitations to first trimester and integrated screening. These include scheduling of testing within relatively narrow gestational age intervals, availability of appropriately trained ultrasonographers for NT measurement, risks associated with chorionic villus biopsy, and costs. There is also increasing evidence that an enlarged NT measurement is indicative of a high risk for spontaneous abortion and for fetal abnormalities that are not detectable by cytogenetic analysis. Women whose fetuses show enlarged NT, therefore, need first trimester counseling regarding their Down syndrome risks and the possibility of other adverse pregnancy outcomes. Follow-up ultrasound and fetal echocardiography in the second trimester are also indicated. First trimester

  15. Science-Based Approach for Advancing Marine and Hydrokinetic Energy: Integrating Numerical Simulations with Experiments

    Science.gov (United States)

    Sotiropoulos, F.; Kang, S.; Chamorro, L. P.; Hill, C.

    2011-12-01

    The field of MHK energy is still in its infancy lagging approximately a decade or more behind the technology and development progress made in wind energy engineering. Marine environments are characterized by complex topography and three-dimensional (3D) turbulent flows, which can greatly affect the performance and structural integrity of MHK devices and impact the Levelized Cost of Energy (LCoE). Since the deployment of multi-turbine arrays is envisioned for field applications, turbine-to-turbine interactions and turbine-bathymetry interactions need to be understood and properly modeled so that MHK arrays can be optimized on a site specific basis. Furthermore, turbulence induced by MHK turbines alters and interacts with the nearby ecosystem and could potentially impact aquatic habitats. Increased turbulence in the wake of MHK devices can also change the shear stress imposed on the bed ultimately affecting the sediment transport and suspension processes in the wake of these structures. Such effects, however, remain today largely unexplored. In this work a science-based approach integrating state-of-the-art experimentation with high-resolution computational fluid dynamics is proposed as a powerful strategy for optimizing the performance of MHK devices and assessing environmental impacts. A novel numerical framework is developed for carrying out Large-Eddy Simulation (LES) in arbitrarily complex domains with embedded MHK devices. The model is able to resolve the geometrical complexity of real-life MHK devices using the Curvilinear Immersed Boundary (CURVIB) method along with a wall model for handling the flow near solid surfaces. Calculations are carried out for an axial flow hydrokinetic turbine mounted on the bed of rectangular open channel on a grid with nearly 200 million grid nodes. The approach flow corresponds to fully developed turbulent open channel flow and is obtained from a separate LES calculation. The specific case corresponds to that studied

  16. Integrating organic micropollutant removal into tertiary filtration: Combining PAC adsorption with advanced phosphorus removal.

    Science.gov (United States)

    Altmann, Johannes; Sperlich, Alexander; Jekel, Martin

    2015-11-01

    Direct addition of powdered activated carbon (PAC) to a deep-bed filter was investigated at pilot-scale as a single advanced treatment stage for simultaneous removal of organic micropollutants (OMPs) and phosphorus from secondary effluent. PAC doses of 10-50 mg/L were assessed with regard to their impacts on filter performance and removal of 15 selected OMPs over a period of 18 months. The PAC was effectively retained by the filter and had no negative effect on filter head loss. Filter runtime until particle breakthrough depended mainly on coagulant dose and did not decrease significantly due to the additional PAC load. Removal of suspended solids and phosphorus by coagulation was effective independent of the PAC dose. A PAC dose of 35 mg/L PAC was suitable to remove well-adsorbing OMPs (e.g. carbamazepine, diclofenac) by >80% and medium adsorbing OMPs (e.g. primidone, sulfamethoxazole) by 50-80%. Median removals were 50-80% for well-adsorbing and 30-50% for medium adsorbing OMPs with 20 mg/L PAC. Abatement of all OMPs was low (removal, relevant concentration decreases of certain OMPs (e.g. 4-formylaminoantipyrine) were attributed to biological transformation in the filter. Adsorption onto accumulating PAC in the top layer of the filter bed led to improved OMP adsorption with increasing filter runtime. The comparison of OMP removal in the pilot filter with laboratory adsorption tests demonstrates that batch test results can be applied to estimate adsorptive OMP removal in real applications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Advances in the use of spaceborne INSAR for application to pipeline route selection and integrity management

    Energy Technology Data Exchange (ETDEWEB)

    Froese, C.R. [AMEC Earth and Environmental Ltd., Edmonton, AB (Canada); Kosar, K. [AMEC Earth and Environmental, Burnaby, BC (Canada); Kooij van der, M. [Atlantis Scientific Inc., Nepean, ON (Canada)

    2004-07-01

    Synthetic aperture radar interferometry (InSAR) is used to measure ground movements associated with slope movements and subsidence. Recent advances in the processing technology have allowed for sub-millimetre level accuracy tracking over long periods of time. Archival data obtained by InSAR is currently being used by engineers in the pipeline industry to review previous movement rates and patterns for the planning of pipeline routes. InSAR is currently used to gather data for ground deformations that occur as a result of landslides; in-situ oil and gas recovery and underground mining processes; active Karstic areas; aquifer withdrawal; soil settlement; and degrading permafrost. In the last decade, repeat-pass InSAR has been used to map large-scale deformation dynamics. Coherent target monitoring (CTM) is used to analyse co-registered imagery on a pixel-by-pixel basis. A stack of approximately 25 scenes of SAR data are collected for the same area and co-evaluated so that individual pixels can be evaluated for phase stability. Recent studies have applied InSAR technology to a landslide analysis of soil slopes encompassing a major transportation and infrastructure corridor in British Columbia. Historical InSAR data is now being used to develop appropriate mitigation measures in the area. New InSAR data has also been used to provide additional spatial movement data to incorporate into decision analyses for the mitigation of the Little Smoky Landslide in northern Alberta. It was concluded that InSAR can provide engineers with valuable data concerning ground deformations and their potential impacts on pipeline infrastructure. 16 refs., 4 tabs., 12 figs.

  18. Integrated Graphics Operations and Analysis Lab Development of Advanced Computer Graphics Algorithms

    Science.gov (United States)

    Wheaton, Ira M.

    2011-01-01

    The focus of this project is to aid the IGOAL in researching and implementing algorithms for advanced computer graphics. First, this project focused on porting the current International Space Station (ISS) Xbox experience to the web. Previously, the ISS interior fly-around education and outreach experience only ran on an Xbox 360. One of the desires was to take this experience and make it into something that can be put on NASA s educational site for anyone to be able to access. The current code works in the Unity game engine which does have cross platform capability but is not 100% compatible. The tasks for an intern to complete this portion consisted of gaining familiarity with Unity and the current ISS Xbox code, porting the Xbox code to the web as is, and modifying the code to work well as a web application. In addition, a procedurally generated cloud algorithm will be developed. Currently, the clouds used in AGEA animations and the Xbox experiences are a texture map. The desire is to create a procedurally generated cloud algorithm to provide dynamically generated clouds for both AGEA animations and the Xbox experiences. This task consists of gaining familiarity with AGEA and the plug-in interface, developing the algorithm, creating an AGEA plug-in to implement the algorithm inside AGEA, and creating a Unity script to implement the algorithm for the Xbox. This portion of the project was unable to be completed in the time frame of the internship; however, the IGOAL will continue to work on it in the future.

  19. Redatuming controlled-source electromagnetic data using Stratton–Chu type integral transformations

    DEFF Research Database (Denmark)

    Zhdanov, Michael; Cai, Hongzhu

    2016-01-01

    We present a new method of analyzing controlled-source electromagnetic (CSEM) data based on redatuming of the observed data from the actual receivers into the virtual receivers. We use the Stratton–Chu type integral transform to calculate the EM field in the virtual receivers. The virtual receivers...... can be placed at any desirable position, including close to the target, which increases the sensitivity of the EM data to the target. The developed method provides an effective model-based interpolation/extrapolation tool for electromagnetic field data. This paper demonstrates that redatuming can...... be used for designing the optimized CSEM survey configuration. The numerical examples, for the Kevin Dome Electromagnetic Project Site, illustrate the practical effectiveness of the developed method....

  20. MapsiDB: an integrated web database for type I polyketide synthases.

    Science.gov (United States)

    Tae, Hongseok; Sohng, Jae Kyung; Park, Kiejung

    2009-10-01

    Polyketides have diverse biological activities, including pharmacological functions such as antibiotic, antitumor and agrochemical properties. They are biosynthesized from short carboxylic acid precursors by polyketide synthases (PKSs). As natural polyketide products include many clinically important drugs and the volume of data on polyketides is rapidly increasing, the development of a database system to manage polyketide data is essential. MapsiDB is an integrated web database formulated to contain data on type I polyketides and their PKSs, including domain and module composition and related genome information. Data on polyketides were collected from journals and online resources and processed with analysis programs. Web interfaces were utilized to construct and to access this database, allowing polyketide researchers to add their data to this database and to use it easily.

  1. Modeling of integral-type Stirling refrigerator using system dynamics approach

    Energy Technology Data Exchange (ETDEWEB)

    Huang, B.J.; Chen, H.Y. [National Taiwan Univ., Dept. of Mechanical Engineering, Taipei (Taiwan)

    2000-07-01

    A modeling of the integral-type Stirling refrigerator (ITSR) using a system dynamics approach is developed in the present study. The system dynamics models are derived to describe the input/output relation of each component of an ITSR. Connecting the equivalent circuits of the components together, we obtain a flow network diagram and derive a transfer function to represent system dynamics behavior of an ITSR. The performance analysis of an ITSR is then easily carried out by use of the transfer function with sinusoidal signal assumption. The performance calculation for a test refrigerator has shown that the analysis is accurate. An empirical correlation for a correction coefficient r in the expansion space was also derived for better results. The present study has demonstrated how a linear system theory or system dynamics approach can be applied to the design of an ITSR. (Author)

  2. Recent advances in marching-on-in-time schemes for solving time domain volume integral equations

    KAUST Repository

    Sayed, Sadeed Bin

    2015-05-16

    Transient electromagnetic field interactions on inhomogeneous penetrable scatterers can be analyzed by solving time domain volume integral equations (TDVIEs). TDVIEs are constructed by setting the summation of the incident and scattered field intensities to the total field intensity on the volumetric support of the scatterer. The unknown can be the field intensity or flux/current density. Representing the total field intensity in terms of the unknown using the relevant constitutive relation and the scattered field intensity in terms of the spatiotemporal convolution of the unknown with the Green function yield the final form of the TDVIE. The unknown is expanded in terms of local spatial and temporal basis functions. Inserting this expansion into the TDVIE and testing the resulting equation at discrete times yield a system of equations that is solved by the marching on-in-time (MOT) scheme. At each time step, a smaller system of equations, termed MOT system is solved for the coefficients of the expansion. The right-hand side of this system consists of the tested incident field and discretized spatio-temporal convolution of the unknown samples computed at the previous time steps with the Green function.

  3. Whole greater than the parts: integrated esophageal centers (IEC) and advanced training in esophageal diseases.

    Science.gov (United States)

    Triadafilopoulos, G; Clarke, J; Hawn, M

    2017-10-01

    An integrated esophageal center (IEC) is a multidisciplinary team with expertise, skill, range, and facilities necessary to achieve optimal outcomes in patients with esophageal diseases efficiently and expeditiously. Within IEC, patients presenting with esophageal symptoms undergo a detailed clinical, functional and structural evaluation of their esophagus prior to implementation of tailored medical, endoscopic or surgical therapy. Serving as a core, the IEC clinical practice also supports research and innovation in esophageal diseases as well as public and physician education. Referrals to the unit may be primary, either from primary care or self-initiated, or secondary from other specialty practices, to reassess patients who have previously failed therapies and to manage complex or complicated cases. The fundamental goals of the IEC are to provide value for patients with esophageal diseases, streamlining complex diagnostic investigations and expediting therapies aiming at reducing costs while improving clinical outcomes, and to accelerate knowledge generation through robust interaction and cross-training across disciplines. The organization of the IEC goes beyond traditional academic and clinical silos and involves a director and administrative team coordinating faculty and fellows from both medical and surgical disciplines and supported by other clinical lines, such as radiology, pathology, etc., while it interfaces with physicians, the public, basic, translational and clinical research groups, and related industry partners. © The Authors 2017. Published by Oxford University Press on behalf of International Society for Diseases of the Esophagus. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Advances and limitations of the integrated water resources management in Panama

    International Nuclear Information System (INIS)

    Escalante Henriquez, Luis Carlos; Charpentier, Claudia; Diez Hernandez, Juan Manuel

    2011-01-01

    Panama competitiveness depends largely on quality and abundance of natural resources, which are being progressively degraded by a disordered urban and economic development. The availability of water in adequate quantity and quality poses serious problems in some areas of the country. This affects both the quality of life of the population and key sectors such as agriculture, industry, hydro and tourism; and stimulates social conflicts related to access, use and disposal of used water. To prevent the degradation of water resources has been promoted a holistic, known as integrated in water resources management (IWRM) strategy. From the Summit of Mar del Plata, Argentina (1977) until the 5th Forum world of the water in Istanbul in Turkey (2009), international meetings that have contributed to defining the principles and recommendations for the IWRM have been held. This work presents a methodological model of IWRM designed for Panama. Essentially consists of a perfected in how to manage water, requiring changes in the political, social, economic and administrative systems of water resource management approach

  5. New politics, an opportunity for maternal health advancement in eastern myanmar: an integrative review.

    Science.gov (United States)

    Loyer, Adam B; Ali, Mohammed; Loyer, Diana

    2014-09-01

    Myanmar (formerly Burma) is a southeast Asian country, with a long history of military dictatorship, human rights violations, and poor health indicators. The health situation is particularly dire among pregnant women in the ethnic minorities of the eastern provinces (Kachin, Shan, Mon, Karen and Karenni regions). This integrative review investigates the current status of maternal mortality in eastern Myanmar in the context of armed conflict between various separatist groups and the military regime. The review examines the underlying factors contributing to high maternal mortality in eastern Myanmar and assesses gaps in the existing research, suggesting areas for further research and policy response. Uncovered were a number of underlying factors uniquely contributing to maternal mortality in eastern Myanmar. These could be grouped into the following analytical themes: ongoing conflict, health system deficits, and political and socioeconomic influences. Abortion was interestingly not identified as an important contributor to maternal mortality. Recent political liberalization may provide space to act upon identified roles and opportunities for the Myanmar Government, the international community, and non-governmental organizations (NGOs) in a manner that positively impacts on maternal healthcare in the eastern regions of Myanmar. This review makes a number of recommendations to this effect.

  6. Advanced control system for the Integral Fast Reactor fuel pin processor

    International Nuclear Information System (INIS)

    Lau, L.D.; Randall, P.F.; Benedict, R.W.; Levinskas, D.

    1993-01-01

    A computerized control system has been developed for the remotely-operated fuel pin processor used in the Integral Fast Reactor Program, Fuel Cycle Facility (FCF). The pin processor remotely shears cast EBR- reactor fuel pins to length, inspects them for diameter, straightness, length, and weight, and then inserts acceptable pins into new sodium-loaded stainless-steel fuel element jackets. Two main components comprise the control system: (1) a programmable logic controller (PLC), together with various input/output modules and associated relay ladder-logic associated computer software. The PLC system controls the remote operation of the machine as directed by the OCS, and also monitors the machine operation to make operational data available to the OCS. The OCS allows operator control of the machine, provides nearly real-time viewing of the operational data, allows on-line changes of machine operational parameters, and records the collected data for each acceptable pin on a central data archiving computer. The two main components of the control system provide the operator with various levels of control ranging from manual operation to completely automatic operation by means of a graphic touch screen interface

  7. Lexical Substitution and Paraphasia in Advanced Dementia of the Alzheimer Type

    Directory of Open Access Journals (Sweden)

    Ovchinnikova Irina

    2017-12-01

    Full Text Available The paper presents the case study of lexical selection in Alzheimer-type dementia. Lexical substitutions in poem recitation and conversations of a Russian speaker, who suffered Alzheimer-type dementia, were analyzed on the background of the lexical retrieval and slip-of-the-tongue phenomena. The classification of the substitutions is worked out on the basis of the links between a target word and its substitutions. The current context plays an essential role as natural priming for a substitution in a poem recitation. Some words have predisposition to be lost; the units belong to the figurative language or to the category of infrequent lexemes. In conversation, the patient masked failures by referring to the circumstances and appealing to the sense of humor. Positive emotions facilitate recollecting of words, involved in the description of real-life events, due to the relatively spared nondeclarative memory. The changes in the substitutions and paraphasias categories between AD stages are statistically significant.

  8. New Advanced Technology to Improve Prediction and Prevention of Type 1 Diabetes

    Science.gov (United States)

    2006-11-01

    utilizing some space off campus in White Flint being leased by the post polio syndrome group. There would be a cost associated with this but if you are...GBM is composed of alpha -3, -4, -5, and -6 chains. In Alport syndrome , a genetically determined disease characterized by heavy proteinuria...defects in the type IV collagen molecule are responsible for the principal clinical feature of the syndrome . In these patients the pathology is sustained

  9. Solution of fractional kinetic equation by a class of integral transform of pathway type

    Science.gov (United States)

    Kumar, Dilip

    2013-04-01

    Solutions of fractional kinetic equations are obtained through an integral transform named Pα-transform introduced in this paper. The Pα-transform is a binomial type transform containing many class of transforms including the well known Laplace transform. The paper is motivated by the idea of pathway model introduced by Mathai [Linear Algebra Appl. 396, 317-328 (2005), 10.1016/j.laa.2004.09.022]. The composition of the transform with differential and integral operators are proved along with convolution theorem. As an illustration of applications to the general theory of differential equations, a simple differential equation is solved by the new transform. Being a new transform, the Pα-transform of some elementary functions as well as some generalized special functions such as H-function, G-function, Wright generalized hypergeometric function, generalized hypergeometric function, and Mittag-Leffler function are also obtained. The results for the classical Laplace transform is retrieved by letting α → 1.

  10. The numerical analysis of functional integral and integro-differential equations of Volterra type

    Science.gov (United States)

    Brunner, Hermann

    The qualitative and quantitative analysis of numerical methods for delay differential equations is now quite well understood, as reflected in the recent monograph by Bellen and Zennaro (2003). This is in remarkable contrast to the situation in the numerical analysis of functional equations, in which delays occur in connection with memory terms described by Volterra integral operators. The complexity of the convergence and asymptotic stability analyses has its roots in new `dimensions' not present in DDEs: the problems have distributed delays; kernels in the Volterra operators may be weakly singular; a second discretization step (approximation of the memory term by feasible quadrature processes) will in general be necessary before solution approximations can be computed.The purpose of this review is to introduce the reader to functional integral and integro-differential equations of Volterra type and their discretization, focusing on collocation techniques; to describe the `state of the art' in the numerical analysis of such problems; and to show that - especially for many `classical' equations whose analysis dates back more than 100 years - we still have a long way to go before we reach a level of insight into their discretized versions to compare with that achieved for DDEs.

  11. Integrating the Allen Brain Institute Cell Types Database into Automated Neuroscience Workflow.

    Science.gov (United States)

    Stockton, David B; Santamaria, Fidel

    2017-10-01

    We developed software tools to download, extract features, and organize the Cell Types Database from the Allen Brain Institute (ABI) in order to integrate its whole cell patch clamp characterization data into the automated modeling/data analysis cycle. To expand the potential user base we employed both Python and MATLAB. The basic set of tools downloads selected raw data and extracts cell, sweep, and spike features, using ABI's feature extraction code. To facilitate data manipulation we added a tool to build a local specialized database of raw data plus extracted features. Finally, to maximize automation, we extended our NeuroManager workflow automation suite to include these tools plus a separate investigation database. The extended suite allows the user to integrate ABI experimental and modeling data into an automated workflow deployed on heterogeneous computer infrastructures, from local servers, to high performance computing environments, to the cloud. Since our approach is focused on workflow procedures our tools can be modified to interact with the increasing number of neuroscience databases being developed to cover all scales and properties of the nervous system.

  12. The L1-type cell adhesion molecule Neuroglian is necessary for maintenance of sensory axon advance in the Drosophila embryo

    Directory of Open Access Journals (Sweden)

    Martin Veronica

    2008-04-01

    Full Text Available Abstract Background Cell adhesion molecules have long been implicated in the regulation of axon growth, but the precise cellular roles played by individual cell adhesion molecules and the molecular basis for their action are still not well understood. We have used the sensory system of the Drosophila embryo to shed light on the mechanism by which the L1-type cell adhesion molecule Neuroglian regulates axon growth. Results We have found a highly penetrant sensory axon stalling phenotype in neuroglian mutant embryos. Axons stalled at a variety of positions along their normal trajectory, but most commonly in the periphery some distance along the peripheral nerve. All lateral and dorsal cluster sensory neurons examined, except for the dorsal cluster neuron dbd, showed stalling. Sensory axons were never seen to project along inappropriate pathways in neuroglian mutants and stalled axons showed normal patterns of fasciculation within nerves. The growth cones of stalled axons possessed a simple morphology, similar to their appearance in wild-type embryos when advancing along nerves. Driving expression of the wild-type form of Neuroglian in sensory neurons alone rescued the neuroglian mutant phenotype of both pioneering and follower neurons. A partial rescue was achieved by expressing the Neuroglian extracellular domain. Over/mis-expression of Neuroglian in all neurons, oenocytes or trachea had no apparent effect on sensory axon growth. Conclusion We conclude that Neuroglian is necessary to maintain axon advance along axonal substrates, but is not required for initiation of axon outgrowth, axon fasciculation or recognition of correct growth substrates. Expression of Neuroglian in sensory neurons alone is sufficient to promote axon advance and the intracellular region of the molecule is largely dispensable for this function. It is unlikely, therefore, that Nrg acts as a molecular 'clutch' to couple adhesion of F-actin within the growth cone to the

  13. Gravity Spy: integrating advanced LIGO detector characterization, machine learning, and citizen science

    Science.gov (United States)

    Zevin, M; Coughlin, S; Bahaadini, S; Besler, E; Rohani, N; Allen, S; Cabero, M; Crowston, K; Katsaggelos, A K; Larson, S L; Lee, T K; Lintott, C; Littenberg, T B; Lundgren, A; Østerlund, C; Smith, J R; Trouille, L; Kalogera, V

    2018-01-01

    With the first direct detection of gravitational waves, the advanced laser interferometer gravitational-wave observatory (LIGO) has initiated a new field of astronomy by providing an alternative means of sensing the universe. The extreme sensitivity required to make such detections is achieved through exquisite isolation of all sensitive components of LIGO from non-gravitational-wave disturbances. Nonetheless, LIGO is still susceptible to a variety of instrumental and environmental sources of noise that contaminate the data. Of particular concern are noise features known as glitches, which are transient and non-Gaussian in their nature, and occur at a high enough rate so that accidental coincidence between the two LIGO detectors is non-negligible. Glitches come in a wide range of time-frequency-amplitude morphologies, with new morphologies appearing as the detector evolves. Since they can obscure or mimic true gravitational-wave signals, a robust characterization of glitches is paramount in the effort to achieve the gravitational-wave detection rates that are predicted by the design sensitivity of LIGO. This proves a daunting task for members of the LIGO Scientific Collaboration alone due to the sheer amount of data. In this paper we describe an innovative project that combines crowdsourcing with machine learning to aid in the challenging task of categorizing all of the glitches recorded by the LIGO detectors. Through the Zooniverse platform, we engage and recruit volunteers from the public to categorize images of time-frequency representations of glitches into pre-identified morphological classes and to discover new classes that appear as the detectors evolve. In addition, machine learning algorithms are used to categorize images after being trained on human-classified examples of the morphological classes. Leveraging the strengths of both classification methods, we create a combined method with the aim of improving the efficiency and accuracy of each individual

  14. Gravity Spy: integrating advanced LIGO detector characterization, machine learning, and citizen science

    International Nuclear Information System (INIS)

    Zevin, M; Coughlin, S; Larson, S L; Trouille, L; Kalogera, V; Bahaadini, S; Besler, E; Rohani, N; Katsaggelos, A K; Allen, S; Cabero, M; Lundgren, A; Crowston, K; Østerlund, C; Lee, T K; Lintott, C; Littenberg, T B; Smith, J R

    2017-01-01

    With the first direct detection of gravitational waves, the advanced laser interferometer gravitational-wave observatory (LIGO) has initiated a new field of astronomy by providing an alternative means of sensing the universe. The extreme sensitivity required to make such detections is achieved through exquisite isolation of all sensitive components of LIGO from non-gravitational-wave disturbances. Nonetheless, LIGO is still susceptible to a variety of instrumental and environmental sources of noise that contaminate the data. Of particular concern are noise features known as glitches , which are transient and non-Gaussian in their nature, and occur at a high enough rate so that accidental coincidence between the two LIGO detectors is non-negligible. Glitches come in a wide range of time-frequency-amplitude morphologies, with new morphologies appearing as the detector evolves. Since they can obscure or mimic true gravitational-wave signals, a robust characterization of glitches is paramount in the effort to achieve the gravitational-wave detection rates that are predicted by the design sensitivity of LIGO. This proves a daunting task for members of the LIGO Scientific Collaboration alone due to the sheer amount of data. In this paper we describe an innovative project that combines crowdsourcing with machine learning to aid in the challenging task of categorizing all of the glitches recorded by the LIGO detectors. Through the Zooniverse platform, we engage and recruit volunteers from the public to categorize images of time-frequency representations of glitches into pre-identified morphological classes and to discover new classes that appear as the detectors evolve. In addition, machine learning algorithms are used to categorize images after being trained on human-classified examples of the morphological classes. Leveraging the strengths of both classification methods, we create a combined method with the aim of improving the efficiency and accuracy of each individual

  15. Gravity Spy: integrating advanced LIGO detector characterization, machine learning, and citizen science

    Science.gov (United States)

    Zevin, M.; Coughlin, S.; Bahaadini, S.; Besler, E.; Rohani, N.; Allen, S.; Cabero, M.; Crowston, K.; Katsaggelos, A. K.; Larson, S. L.; Lee, T. K.; Lintott, C.; Littenberg, T. B.; Lundgren, A.; Østerlund, C.; Smith, J. R.; Trouille, L.; Kalogera, V.

    2017-03-01

    With the first direct detection of gravitational waves, the advanced laser interferometer gravitational-wave observatory (LIGO) has initiated a new field of astronomy by providing an alternative means of sensing the universe. The extreme sensitivity required to make such detections is achieved through exquisite isolation of all sensitive components of LIGO from non-gravitational-wave disturbances. Nonetheless, LIGO is still susceptible to a variety of instrumental and environmental sources of noise that contaminate the data. Of particular concern are noise features known as glitches, which are transient and non-Gaussian in their nature, and occur at a high enough rate so that accidental coincidence between the two LIGO detectors is non-negligible. Glitches come in a wide range of time-frequency-amplitude morphologies, with new morphologies appearing as the detector evolves. Since they can obscure or mimic true gravitational-wave signals, a robust characterization of glitches is paramount in the effort to achieve the gravitational-wave detection rates that are predicted by the design sensitivity of LIGO. This proves a daunting task for members of the LIGO Scientific Collaboration alone due to the sheer amount of data. In this paper we describe an innovative project that combines crowdsourcing with machine learning to aid in the challenging task of categorizing all of the glitches recorded by the LIGO detectors. Through the Zooniverse platform, we engage and recruit volunteers from the public to categorize images of time-frequency representations of glitches into pre-identified morphological classes and to discover new classes that appear as the detectors evolve. In addition, machine learning algorithms are used to categorize images after being trained on human-classified examples of the morphological classes. Leveraging the strengths of both classification methods, we create a combined method with the aim of improving the efficiency and accuracy of each individual

  16. An advanced draft genome assembly of a desi type chickpea (Cicer arietinum L.).

    Science.gov (United States)

    Parween, Sabiha; Nawaz, Kashif; Roy, Riti; Pole, Anil K; Venkata Suresh, B; Misra, Gopal; Jain, Mukesh; Yadav, Gitanjali; Parida, Swarup K; Tyagi, Akhilesh K; Bhatia, Sabhyata; Chattopadhyay, Debasis

    2015-08-11

    Chickpea (Cicer arietinum L.) is an important pulse legume crop. We previously reported a draft genome assembly of the desi chickpea cultivar ICC 4958. Here we report an advanced version of the ICC 4958 genome assembly (version 2.0) generated using additional sequence data and an improved genetic map. This resulted in 2.7-fold increase in the length of the pseudomolecules and substantial reduction of sequence gaps. The genome assembly covered more than 94% of the estimated gene space and predicted the presence of 30,257 protein-coding genes including 2230 and 133 genes encoding potential transcription factors (TF) and resistance gene homologs, respectively. Gene expression analysis identified several TF and chickpea-specific genes with tissue-specific expression and displayed functional diversification of the paralogous genes. Pairwise comparison of pseudomolecules in the desi (ICC 4958) and the earlier reported kabuli (CDC Frontier) chickpea assemblies showed an extensive local collinearity with incongruity in the placement of large sequence blocks along the linkage groups, apparently due to use of different genetic maps. Single nucleotide polymorphism (SNP)-based mining of intra-specific polymorphism identified more than four thousand SNPs differentiating a desi group and a kabuli group of chickpea genotypes.

  17. Development of advanced nuclear core analysis system applicable to various reactor types (II)

    International Nuclear Information System (INIS)

    Kaneko, Kunio

    2003-03-01

    A 900 group cross section library based on the specification determined last year was produced for 27 nuclei of the fast reactor benchmark problem evaluated in nuclear data file JENDL-3.2. In addition, the new SLAROM code, which has been developed as an advanced detail analysis system, was revised so as to make cell calculations effectively with the above 900 group library. Furthermore, new functions were added to the SLAROM so that the SLAROM evaluates assembly parameters using effective cross sections derived by the SLAROM and produces any condensed effective cross section set for core performance analysis. With the 900 group cross section library and the revised SALROM, three cell calculations for fast and medium neutron speed reactors having different neutron spectrum were performed, and the results were compared with those calculated by the continuos energy Monte Carlo code MVP. By the comparisons, it is concluded that the newly revised SLAROM and a 900 group cross section library give accuracy comparable to MVP for predicting core performances. (author)

  18. Advanced emission control system: CO2 sequestration using algae integrated management system (AIMS)

    International Nuclear Information System (INIS)

    Syed Isa Syed Alwi; Mohd Norsham Che Yahya; Ruzanna Abdul Rahman

    2010-01-01

    One of the companies under Algae tech, Sasaran Bio fuel Sdn. Bhd. provides project management, technology transfer and technical expertise to develop a solution to minimize and mitigate Carbon Dioxide (CO 2 ) emissions through the diversion of the CO 2 to open algal ponds and enclosed photo-bioreactors as algal propagation technologies to consume CO 2 waste stream. The company is presently consulting a listed company from Indonesia to address the technology know-how and implementation of microalgae development from the flue gas of the Groups power plants. Nowadays, one of the aspects that contribute to the air pollution is the emission of flue gases from the factories. So, we provide a system that can reduce the emission of flue gas to the atmosphere and at the same time, cultivate certain strain of algae. With the technology, Algae Integrated Management System (AIMS), it will be for sure a new beginning for way to reduce air pollution. The utilization of power plant resources for growing selected microalgae at a low energy cost for valuable products and bio-fuels while providing CO 2 sequestering. In the same time, it also a low cost algae agriculture. By doing so, it provides all year algae production which can be an income. This residual energy used CO 2 produced from power stations and industrial plants to feed the process (CO 2 recycling and bio-fixation) in cultivation of algae. This will be a low cost flue gas (CO 2 ) to the developer. In a nutshell, CO 2 Sequestration by algae reactors is a potential to reduce greenhouse gas emission by using the CO 2 in the stack gases to produce algae. (author)

  19. Development of ITM oxygen technology for integration in IGCC and other advanced power generation

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Phillip A. [Air Products And Chemicals, Inc., Allentown, PA (United States)

    2015-03-31

    Ion Transport Membrane (ITM) technology is based on the oxygen-ion-conducting properties of certain mixed-metal oxide ceramic materials that can separate oxygen from an oxygen-containing gas, such as air, under a suitable driving force. The “ITM Oxygen” air separation system that results from the use of such ceramic membranes produces a hot, pure oxygen stream and a hot, pressurized, oxygen-depleted stream from which significant amounts of energy can be extracted. Accordingly, the technology integrates well with other high-temperature processes, including power generation. Air Products and Chemicals, Inc., the Recipient, in conjunction with a dozen subcontractors, developed ITM Oxygen technology under this five-phase Cooperative Agreement from the laboratory bench scale to implementation in a pilot plant capable of producing power and 100 tons per day (TPD) of purified oxygen. A commercial-scale membrane module manufacturing facility (the “CerFab”), sized to support a conceptual 2000 TPD ITM Oxygen Development Facility (ODF), was also established and operated under this Agreement. In the course of this work, the team developed prototype ceramic production processes and a robust planar ceramic membrane architecture based on a novel ceramic compound capable of high oxygen fluxes. The concept and feasibility of the technology was thoroughly established through laboratory pilot-scale operations testing commercial-scale membrane modules run under industrial operating conditions with compelling lifetime and reliability performance that supported further scale-up. Auxiliary systems, including contaminant mitigation, process controls, heat exchange, turbo-machinery, combustion, and membrane pressure vessels were extensively investigated and developed. The Recipient and subcontractors developed efficient process cycles that co-produce oxygen and power based on compact, low-cost ITMs. Process economics assessments show significant benefits relative to state

  20. Superstrate and substrate type cadmium telluride solar cells and monolithic integration of photovoltaic modules

    Science.gov (United States)

    Matulionis, Ilvydas

    This dissertation describes the fabrication of polycrystalline CdTe-based solar cells and monolithic integration of photovoltaic devices into modules using laser scribing. We have improved the efficiency of sputtered superstrate type CdTe solar cells, including devices with unconventionally thin absorber, built world-record efficiency substrate type CdTe solar cells, observed effects related to interfacial layers, and investigated the use of 7 different types of lasers for scribing of materials used for CdTe and CuInGaSe2 solar cells. We have fabricated CdTe/CdS solar cells using magnetron sputtering with conversion efficiencies of 12.5%. As the thickness of CdTe is reduced to less than 1 mum, devices still maintain efficiencies near 10%. Thinning of the CdTe layer would make manufacturing of solar modules more economical. We have built inverted (substrate) configuration CdTe solar cells with state-of-the-art efficiencies of 7.8%. We find that tellurium and sulfur interdiffusion is strongly inhibited in substrate type cells due to the fact that the CdS is grown on fully formed CdTe grains. We have optimized a sputtering process for aluminum-doped ZnO, achieved a resistivity of 5 x 10-4 O-cm, and fabricated 5.8% efficient substrate type CdTe solar cells with the ZnO:Al top contact. We have researched the effect of a high resistivity (HR) layer between the CdS and a transparent conducting oxide. Cells with the HR layer maintain higher efficiencies as the thickness of the CdS is reduced to 60 nm and less. We have investigated the use of 7 different types of lasers for scribing of the polycrystalline materials used for CdTe and CuIn(Ga)Se2 (CIGS) thin-film solar cells. The lasers included four different Nd:YAG (532 and 1064 nm), a Cu vapor (511 and 578 nm) and two excimers (308 and 248 nm). Pulse durations ranged from 0.1 to 250 ns. We find that most wavelength and pulse duration combinations work well for the thin-film materials. ZnO should be scribed with an

  1. Non-albuminuric renal disease among subjects with advanced stages of chronic kidney failure related to type 2 diabetes mellitus.

    Science.gov (United States)

    Boronat, Mauro; García-Cantón, César; Quevedo, Virginia; Lorenzo, Dionisio L; López-Ríos, Laura; Batista, Fátima; Riaño, Marta; Saavedra, Pedro; Checa, María D

    2014-03-01

    Urinary albumin excretion has been consistently found to be normal in a significant number of subjects with early stages of diabetic kidney disease. This study was aimed to estimate the prevalence and characteristics of non-albuminuric chronic kidney disease associated with type 2 diabetes mellitus among subjects who reach advanced stages of renal failure. Study population was composed of incident patients with advanced chronic kidney disease (glomerular filtration rate <30 mL/min) related to type 2 diabetes in a tertiary hospital from Gran Canaria (Spain) during a period of 2 years. Subjects were classified as normoalbuminuric (urinary albumin-to-creatine ratio [UACR] <30 mg/g), microalbuminuric (UACR ≥30 and <300 mg/g), or proteinuric (UACR ≥300 mg/g). Of 78 eligible patients, 21.8% had normoalbuminuria, 20.5% had microalbuminuria, and 57.7% had proteinuria. Individuals with normoalbuminuria were mostly women and had a lower prevalence of smoking and polyneuropathy than subjects with microalbuminuria or proteinuria. They also presented greater measures of body mass index and waist circumference, higher values of total and LDL cholesterol, and lower values of HbA1c and serum creatinine than subjects with microalbuminuria or proteinuria. Multivariate analysis demonstrated that female sex (positively) and HbA1c and polyneuropathy (negatively) were independently associated with absence of albuminuria. In conclusion, around 20% of subjects with diabetes-related advanced chronic kidney disease, characteristically women, have normal urinary albumin excretion. HbA1c and polyneuropathy are inversely related to this non-albuminuric form of nephropathy.

  2. Advances in diabetes for the millennium: nutritional therapy of type 2 diabetes.

    Science.gov (United States)

    Rendel, Marc

    2004-09-01

    Dietary modification is useful in both type 1 and type 2 diabetes. Glucose levels after a meal are largely determined by carbohydrate intake. Decreased intake of simple carbohydrates and increased fiber consumption lower postprandial glucose. Obesity has become epidemic in the United States and has dramatically increased the incidence of type 2 diabetes by augmenting insulin resistance. Dietary treatment of obesity has been frustrating. Success will require education in using foods with high fiber contents, low glycemic indexes, and low saturated fat levels. The use of natural foods must be supplemented by the use of semisynthetic foods with desirable properties. The educational efforts required are substantial and must be recognized by third-party reimbursement agencies. Operative procedures to decrease intake or reduce the absorption of food are being used with increasing frequency. Bariatric surgery is often successful in inducing a substantial loss of weight; however, this success must be balanced against the complications of surgery, which can be considerable. The pharmacologic approaches to treatment of obesity have focused primarily on anorexigenic agents. Several polypeptides that induce satiety are currently under study, including leptin and glucagon-like peptide-1 (GLP-1). Orlistat has been used to induce the malabsorption of fat to reduce caloric ingestion. Of the currently used oral hypoglycemics, metformin and the disaccharidase inhibitors have the best tendency to promote weight loss. There is active research on the uncoupling proteins that induce thermogenesis and promote the dissipation of calories. The beta-3 agonists act through the uncoupling proteins. The thiazolidinediones tend to promote weight gain through the PPAR gene locus. Agents that antagonize this effect could induce weight loss. The future will undoubtedly bring us drugs that are effective in causing weight loss. The advent of drugs to successfully combat obesity will substantially

  3. Advances in study of perpes simplex virus type 1-thymidine kinase reporter gene imaging

    International Nuclear Information System (INIS)

    Liu Ying; Lan Xiaoli; Zhang Yongxue

    2007-01-01

    Radionuclide reporter gene imaging is an effect way to provide qualitative and quantitative information for gene therapy. There are three systems of reporter gene including kinase reporter gene. perpes simplex virus type 1-thymidine kinase (HSV1-tk) has perfect physical and chemical characteristic which is suit for imaging as reporter gene. It has been widely investigated and intensively researched. Two substrates of HSV1-tk are purine nucleosite derivant and acyclovir derivant, which can also be used as reporter probes of HSV1-tk. (authors)

  4. Integrated functions of membrane-type 1 matrix metalloproteinase in regulating cancer malignancy: Beyond a proteinase.

    Science.gov (United States)

    Sakamoto, Takeharu; Seiki, Motoharu

    2017-06-01

    Membrane-type 1 matrix metalloproteinase (MT1-MMP) is expressed in different types of invasive and proliferative cells, including cancer cells and stromal cells. MT1-MMP cleaves extracellular matrix proteins, membrane proteins and other pericellular proteins, thereby changing the cellular microenvironment and regulating signal activation. Critical roles of protease activity in cancer cell proliferation, invasion and metastasis have been demonstrated by many groups. MT1-MMP also has a non-protease activity in that it inhibits the oxygen-dependent suppression of hypoxia-inducible factors (HIFs) via Munc18-1-interacting protein 3 (Mint3) and thereby enhances the expression of HIF target genes. Elevated HIF activity in MT1-MMP-expressing cancer cells is a fundamental mechanism underlying the Warburg effect, a well-known phenomenon where malignant cancer cells exhibit a higher rate of glucose metabolism. Because specific intervention of HIF activation by MT1-MMP suppresses tumor formation by cancer cells in mice, both the proteolytic and non-proteolytic activities of MT1-MMP are important for tumor malignancy and function in an integrated manner. In this review, we summarize recent findings relating to how MT1-MMP activates HIF and its effects on cancer cells and stromal cells. © 2017 The Authors. Cancer Science published by John Wiley & Sons Australia, Ltd on behalf of Japanese Cancer Association.

  5. Design of proportional-integral-derivative type optimal controller for a nuclear reactor

    International Nuclear Information System (INIS)

    Pal, Jayanta

    1976-01-01

    A theoretic approach to the design of a proportional integral derivative (PID) type optimal controller for a nuclear reactor is considered. A linearized version of the state-space model of a nuclear-reactor-plant is investigated which shows very 'sluggish' response (settling time of the order of 600 seconds) to changes in the power demand and frequency. It is shown that with a judicious choice of state variables a PID type optimal controller realisation is possible. A controller is designed to minimise the effects of (a) a sudden increase or decrease in the electrical power demand (b) change in frequency at grid. The above controller, designed for a tracking problem, reduces the steady-state error (in response to a step input) to zero and the dynamics of the system become 'faster' (setting time of the order of 100 seconds). The controller is also insensitive to changes in system parameters. The superiority in the performance of the system with the optimal PID controller as compared with that of the conventional regulator is conclusively established. (author)

  6. Advanced variable speed air source integrated heat pump (AS-IHP) development - CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, Van D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Munk, Jeffrey D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Ally, Moonis Raza [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

    2015-09-30

    Between August 2011 and September 2015, Oak Ridge National Laboratory (ORNL) and Nordyne, LLC (now Nortek Global HVAC LLC, NGHVAC) engaged in a Cooperative Research and Development Agreement (CRADA) to develop an air-source integrated heat pump (AS-IHP) system for the US residential market. Two generations of laboratory prototype systems were designed, fabricated, and lab-tested during 2011-2013. Performance maps for the system were developed using the latest research version of the DOE/ORNL Heat Pump Design Model, or HPDM, (Rice 1991; Rice and Jackson 2005; Shen et al 2012) as calibrated against the lab test data. These maps were the input to the TRNSYS (SOLAR Energy Laboratory, et al, 2010) system to predict annual performance relative to a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (combination of 13 SEER air-source heat pump (ASHP) and resistance water heater with Energy Factor (EF) of 0.9). Predicted total annual energy savings, while providing space conditioning and water heating for a tight, well insulated 2600 ft2 (242 m2) house at 5 U.S. locations, ranged from 46 to 61%, averaging 52%, relative to the baseline system (lowest savings at the cold-climate Chicago location). Predicted energy use for water heating was reduced 62 to 76% relative to resistance WH. Based on these lab prototype test and analyses results a field test prototype was designed and fabricated by NGHVAC. The unit was installed in a 2400 ft2 (223 m2) research house in Knoxville, TN and field tested from May 2014 to April 2015. Based on the demonstrated field performance of the AS-IHP prototype and estimated performance of a baseline system operating under the same loads and weather conditions, it was estimated that the prototype would achieve ~40% energy savings relative to the minimum efficiency suite. The estimated WH savings were >60% and SC mode savings were >50%. But estimated SH savings were only about 20%. It is believed that had the test

  7. Non-skew-symmetric classical r-matrices, algebraic Bethe ansatz, and Bardeen-Cooper-Schrieffer-type integrable systems

    International Nuclear Information System (INIS)

    Skrypnyk, T.

    2009-01-01

    We construct quantum integrable systems associated with non-skew-symmetric gl(2)-valued classical r-matrices. We find a new explicit multiparametric family of such the non-skew-symmetric classical r-matrices. We consider two classes of examples of the corresponding integrable systems, namely generalized Gaudin systems with and without an external magnetic field. In the case of arbitrary r-matrices diagonal in a standard gl(2)-basis, we calculate the spectrum of the corresponding quantum integrable systems using the algebraic Bethe ansatz. We apply these results to a construction of integrable fermionic models and obtain a wide class of integrable Bardeen-Cooper-Schrieffer (BCS)-type fermionic Hamiltonians containing the pairing and electrostatic interaction terms. We also consider special cases when the corresponding integrable Hamiltonians contain only pairing interaction term and are exact analogs of the 'reduced BCS Hamiltonian' of Richardson

  8. Recent advances in understanding Type 1 Diabetes [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Gustaf Christoffersson

    2016-01-01

    Full Text Available Type 1 diabetes is a multifactorial disease in which genetic and environmental factors play a key role. The triggering event is still obscure, and so are many of the immune events that follow. In this brief review, we discuss the possible role of potential environmental factors and which triggers are believed to have a role in the disease. In addition, as the disease evolves, beta cells are lost and this occurs in a very heterogeneous fashion. Our knowledge of how beta cell mass declines and our view of the disease’s pathogenesis are also debated. We highlight the major hallmarks of disease, among which are MHC-I (major histocompatibility complex class I expression and insulitis. The dependence versus independence of antigen for the immune infiltrate is also discussed, as both the influence from bystander T cells and the formation of neo-epitopes through post-translational modifications are thought to influence the course of the disease. As human studies are proliferating, our understanding of the disease’s pathogenesis will increase exponentially. This article aims to shed light on some of the burning questions in type 1 diabetes research.

  9. Developing a Patient Care Co-ordination Centre in Trafford, England: lessons from the International Foundation for Integrated Care (IFIC/Advancing Quality Alliance integrated care fellowship experience

    Directory of Open Access Journals (Sweden)

    Michael Gregory

    2015-05-01

    Full Text Available The NHS and Social Care in England are facing one of the biggest financial challenges for a generation. Commissioners and providers need to work on collaborative schemes to manage the increasing demand on health and social care within a period of financial constraint. Different forms of care co-ordination have been developed at different levels across the world. In the north-west of England, the Trafford health and social care economy have been working through a competitive dialogue process with industry to develop an innovative and dynamic solution to deliver seamless co-ordination for all patients and service users. The strategy is to develop a new Patient Care Co-ordination Centre, which will be responsible for the delivery of co-ordinated, quality care. The Patient Care Co-ordination Centre will work at clinical, service, functional and community levels across multiple providers covering risk stratification, preventative, elective and unscheduled care. I am the clinical lead for the Patient Care Co-ordination Centre and during my year as an Advancing Quality Alliance Integrated Care Fellow, I have had the opportunity to study examples of care coordination from UK and international sites. The learning from these visits has been assimilated into the design process of the Patient Care Co-ordination Centre.

  10. Developing a Patient Care Co-ordination Centre in Trafford, England: lessons from the International Foundation for Integrated Care (IFIC/Advancing Quality Alliance integrated care fellowship experience

    Directory of Open Access Journals (Sweden)

    Michael Gregory

    2015-05-01

    Full Text Available The NHS and Social Care in England are facing one of the biggest financial challenges for a generation. Commissioners and providers need to work on collaborative schemes to manage the increasing demand on health and social care within a period of financial constraint. Different forms of care co-ordination have been developed at different levels across the world.In the north-west of England, the Trafford health and social care economy have been working through a competitive dialogue process with industry to develop an innovative and dynamic solution to deliver seamless co-ordination for all patients and service users. The strategy is to develop a new Patient Care Co-ordination Centre, which will be responsible for the delivery of co-ordinated, quality care. The Patient Care Co-ordination Centre will work at clinical, service, functional and community levels across multiple providers covering risk stratification, preventative, elective and unscheduled care.I am the clinical lead for the Patient Care Co-ordination Centre and during my year as an Advancing Quality Alliance Integrated Care Fellow, I have had the opportunity to study examples of care coordination from UK and international sites. The learning from these visits has been assimilated into the design process of the Patient Care Co-ordination Centre.

  11. Developing a Patient Care Co-ordination Centre in Trafford, England: lessons from the International Foundation for Integrated Care (IFIC)/Advancing Quality Alliance integrated care fellowship experience.

    Science.gov (United States)

    Gregory, Michael

    2015-01-01

    The NHS and Social Care in England are facing one of the biggest financial challenges for a generation. Commissioners and providers need to work on collaborative schemes to manage the increasing demand on health and social care within a period of financial constraint. Different forms of care co-ordination have been developed at different levels across the world. In the north-west of England, the Trafford health and social care economy have been working through a competitive dialogue process with industry to develop an innovative and dynamic solution to deliver seamless co-ordination for all patients and service users. The strategy is to develop a new Patient Care Co-ordination Centre, which will be responsible for the delivery of co-ordinated, quality care. The Patient Care Co-ordination Centre will work at clinical, service, functional and community levels across multiple providers covering risk stratification, preventative, elective and unscheduled care. I am the clinical lead for the Patient Care Co-ordination Centre and during my year as an Advancing Quality Alliance Integrated Care Fellow, I have had the opportunity to study examples of care coordination from UK and international sites. The learning from these visits has been assimilated into the design process of the Patient Care Co-ordination Centre.

  12. Hands typing what hands do: Action-semantic integration dynamics throughout written verb production.

    Science.gov (United States)

    García, Adolfo M; Ibáñez, Agustín

    2016-04-01

    Processing action verbs, in general, and manual action verbs, in particular, involves activations in gross and hand-specific motor networks, respectively. While this is well established for receptive language processes, no study has explored action-semantic integration during written production. Moreover, little is known about how such crosstalk unfolds from motor planning to execution. Here we address both issues through our novel "action semantics in typing" paradigm, which allows to time keystroke operations during word typing. Specifically, we created a primed-verb-copying task involving manual action verbs, non-manual action verbs, and non-action verbs. Motor planning processes were indexed by first-letter lag (the lapse between target onset and first keystroke), whereas execution dynamics were assessed considering whole-word lag (the lapse between first and last keystroke). Each phase was differently delayed by action verbs. When these were processed for over one second, interference was strong and magnified by effector compatibility during programming, but weak and effector-blind during execution. Instead, when they were processed for less than 900ms, interference was reduced by effector compatibility during programming and it faded during execution. Finally, typing was facilitated by prime-target congruency, irrespective of the verbs' motor content. Thus, action-verb semantics seems to extend beyond its embodied foundations, involving conceptual dynamics not tapped by classical reaction-time measures. These findings are compatible with non-radical models of language embodiment and with predictions of event coding theory. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Photonics-on-a-chip: recent advances in integrated waveguides as enabling detection elements for real-world, lab-on-a-chip biosensing applications.

    Science.gov (United States)

    Washburn, Adam L; Bailey, Ryan C

    2011-01-21

    By leveraging advances in semiconductor microfabrication technologies, chip-integrated optical biosensors are poised to make an impact as scalable and multiplexable bioanalytical measurement tools for lab-on-a-chip applications. In particular, waveguide-based optical sensing technology appears to be exceptionally amenable to chip integration and miniaturization, and, as a result, the recent literature is replete with examples of chip-integrated waveguide sensing platforms developed to address a wide range of contemporary analytical challenges. As an overview of the most recent advances within this dynamic field, this review highlights work from the last 2-3 years in the areas of grating-coupled, interferometric, photonic crystal, and microresonator waveguide sensors. With a focus towards device integration, particular emphasis is placed on demonstrations of biosensing using these technologies within microfluidically controlled environments. In addition, examples of multiplexed detection and sensing within complex matrices--important features for real-world applicability--are given special attention.

  14. Advances in the treatment of type 2 diabetes: impact of dulaglutide

    Directory of Open Access Journals (Sweden)

    Thompson AM

    2016-05-01

    Full Text Available Angela M Thompson, Jennifer M TrujilloDepartment of Clinical Pharmacy, University of Colorado Skaggs School of Pharmacy and Pharmaceutical Sciences, Aurora, CO, USA Abstract: The purpose of this review is to provide a review of current data of the most recently approved glucagon-like peptide (GLP-1-receptor agonist, dulaglutide, in the treatment of type 2 diabetes. To complete this, a PubMed search was performed to identify manuscripts published from 1947 to July 2015. The search terms “Trulicity”, “dulaglutide”, and “LY2189265” were utilized, and publications were included if they evaluated the pharmacology, pharmacokinetics, efficacy, safety, or patient-reported outcomes of dulaglutide. Dulaglutide is a GLP-1 receptor agonist that mimics endogenous GLP-1, the hormone produced in response to food intake. Modifications have been made to the molecule to delay breakdown and allow for once-weekly dosing. Dulaglutide has been studied as monotherapy and in combination with several agents, including metformin, glimepiride, pioglitazone, and insulin lispro. Dulaglutide has demonstrated superior efficacy compared to placebo, metformin, insulin glargine, sitagliptin, and twice-daily exenatide. It was found to be noninferior to liraglutide. The most common adverse effects in clinical studies were gastrointestinal-related adverse events, and patient satisfaction was high with the use of dulaglutide. Dulaglutide is an appealing option for the treatment of type 2 diabetes, based on its once-weekly dosing, A1c lowering comparable to liraglutide, weight reduction comparable to exenatide, and a similar adverse-effect profile to other GLP-1 receptor agonists. Keywords: dulaglutide, GLP-1 receptor agonist, T2D

  15. Recent advances towards an integrated assessment of wildfire effects in forest plantations in Portugal

    Science.gov (United States)

    Keizer, Jan Jacob; Abrantes, Nelson; Nunes, João Pedro; Caetano, Ana; Campos, Isabel; Faria, Silvia; Gonzaléz-Pelayo, Oscar; Hoogerwerf, Annelou; Malvar, Maruxa; Martins, Martinho; Methorst, Michael; Oliveira, Bruna; Prats, Sergio; Puga, João; Ré, Ana; Silva, Flávio; Serpa, Dalila; Varela, Marifé; Verheijen, Frank; Vieira, Diana

    2017-04-01

    sediment losses but also for organic matter/carbon losses, nutrient losses and pollutant export (PAHs and metals). Arguably, however, the most relevant advances that the esp team has been making in the past few years concern the following three topics: (i) the evolution of PAH and metal contents of ash and topsoil layers with time-since-fire (Campos et al., 2016); (ii) the eco-toxicological effects of post-fire runoff on aquatic organisms, especially through in-situ assays (Ré at al., 2017); (iii) mid-term effects of forest residue mulching on soil (fertility) losses as well as vegetation and soil physical, chemical and biological properties (Campos et al., 2016; Prats et al., 2016, Puga et al., in press) . Besides these three topics, the present presentation will address one topic of very recent nature (since summer 2016) and one topic of future work (from summer 2017 onwards), i.e. (iv) pre- vs. post-fire catchment behaviour and (v) post-fire carbon fluxes at the point to field scale, respectively. References Campos I., Abrantes N., Keizer J.J., Vale C., Pereira P., 2016. Major and trace elements in soils and ashes of eucalypt and pine forest plantations in Portugal following a wildfire. Science of the Total Environment 572, 1363-1376 Nunes J.P, Malvar M., Benali A.A., Rial M.E.R., Keizer J.J., 2016. A simple water balance model adapted for soil water repellency: application on Portuguese burned and unburned eucalypt stands. Hydrological Processes 30, 463-478. Nunes J.P, Vieira D., Keizer J.J., 2016. Comparing simple and complex approaches to simulate the impacts of soil water repellency on runoff and erosion in burnt Mediterranean forest slopes. EGU2017, session SSS2.22/HS9.12/NH9.24. Prats S.A., Wagenbrenner J., Malvar MC., Martins MAS., Keizer JJ., 2016. Mid-term effectiveness of mulching-based treatments in central Portugal. Science of the Total Environment 573, 1242-1254. Puga J.R.L., Abrantes N.J.C., de Oliveira M.J.S., Vieira D.C.S., Faria S.R., Gonçalves F

  16. An integrated model of scintillator-reflector properties for advanced simulations of optical transport

    Science.gov (United States)

    Roncali, Emilie; Stockhoff, Mariele; Cherry, Simon R.

    2017-06-01

    Accurately modeling the light transport in scintillation detectors is essential to design new detectors for nuclear medicine or high energy physics. Optical models implemented in software such as Geant4 and GATE suffer from important limitations that we addressed by implementing a new approach in which the crystal reflectance was computed from 3D surface measurements. The reflectance was saved in a look-up-table (LUT) then used in Monte Carlo simulation to determine the fate of optical photons. Our previous work using this approach demonstrated excellent agreement with experimental characterization of crystal light output in a limited configuration, i.e. when using no reflector. As scintillators are generally encapsulated in a reflector, it is essential to include the crystal-reflector interface in the LUT. Here we develop a new LUT computation and apply it to several reflector types. A second LUT that contains transmittance data is also saved to enable modeling of optical crosstalk. LUTs have been computed for rough and polished crystals coupled to a Lambertian (e.g. Teflon tape) or a specular reflector (e.g. ESR) using air or optical grease, and the light output was computed using a custom Monte Carlo code. 3  ×  3  ×  20 mm3 lutetium oxyorthosilicate crystals were prepared using these combinations, and the light output was measured experimentally at different irradiation depths. For all reflector and surface finish combinations, the measured and simulated light output showed very good agreement. The behavior of optical photons at the interface crystal-reflector was studied using these simulations, and results highlighted the large difference in optical properties between rough and polished crystals, and Lambertian and specular reflectors. These simulations also showed how the travel path of individual scintillation photons was affected by the reflector and surface finish. The ultimate goal of this work is to implement this model in Geant4 and

  17. Integration

    DEFF Research Database (Denmark)

    Emerek, Ruth

    2004-01-01

    Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration......Bidraget diskuterer de forskellige intergrationsopfattelse i Danmark - og hvad der kan forstås ved vellykket integration...

  18. Flatbed-type 3D display systems using integral imaging method

    Science.gov (United States)

    Hirayama, Yuzo; Nagatani, Hiroyuki; Saishu, Tatsuo; Fukushima, Rieko; Taira, Kazuki

    2006-10-01

    We have developed prototypes of flatbed-type autostereoscopic display systems using one-dimensional integral imaging method. The integral imaging system reproduces light beams similar of those produced by a real object. Our display architecture is suitable for flatbed configurations because it has a large margin for viewing distance and angle and has continuous motion parallax. We have applied our technology to 15.4-inch displays. We realized horizontal resolution of 480 with 12 parallaxes due to adoption of mosaic pixel arrangement of the display panel. It allows viewers to see high quality autostereoscopic images. Viewing the display from angle allows the viewer to experience 3-D images that stand out several centimeters from the surface of the display. Mixed reality of virtual 3-D objects and real objects are also realized on a flatbed display. In seeking reproduction of natural 3-D images on the flatbed display, we developed proprietary software. The fast playback of the CG movie contents and real-time interaction are realized with the aid of a graphics card. Realization of the safety 3-D images to the human beings is very important. Therefore, we have measured the effects on the visual function and evaluated the biological effects. For example, the accommodation and convergence were measured at the same time. The various biological effects are also measured before and after the task of watching 3-D images. We have found that our displays show better results than those to a conventional stereoscopic display. The new technology opens up new areas of application for 3-D displays, including arcade games, e-learning, simulations of buildings and landscapes, and even 3-D menus in restaurants.

  19. Likelihood ratio-based integrated personal risk assessment of type 2 diabetes.

    Science.gov (United States)

    Sato, Noriko; Htun, Nay Chi; Daimon, Makoto; Tamiya, Gen; Kato, Takeo; Kubota, Isao; Ueno, Yoshiyuki; Yamashita, Hidetoshi; Fukao, Akira; Kayama, Takamasa; Muramatsu, Masaaki

    2014-01-01

    To facilitate personalized health care for multifactorial diseases, risks of genetic and clinical/environmental factors should be assessed together for each individual in an integrated fashion. This approach is possible with the likelihood ratio (LR)-based risk assessment system, as this system can incorporate manifold tests. We examined the usefulness of this system for assessing type 2 diabetes (T2D). Our system employed 29 genetic susceptibility variants, body mass index (BMI), and hypertension as risk factors whose LRs can be estimated from openly available T2D association data for the Japanese population. The pretest probability was set at a sex- and age-appropriate population average of diabetes prevalence. The classification performance of our LR-based risk assessment was compared to that of a non-invasive screening test for diabetes called TOPICS (with score based on age, sex, family history, smoking, BMI, and hypertension) using receiver operating characteristic analysis with a community cohort (n = 1263). The area under the receiver operating characteristic curve (AUC) for the LR-based assessment and TOPICS was 0.707 (95% CI 0.665-0.750) and 0.719 (0.675-0.762), respectively. These AUCs were much higher than that of a genetic risk score constructed using the same genetic susceptibility variants, 0.624 (0.574-0.674). The use of ethnically matched LRs is necessary for proper personal risk assessment. In conclusion, although LR-based integrated risk assessment for T2D still requires additional tests that evaluate other factors, such as risks involved in missing heritability, our results indicate the potential usability of LR-based assessment system and stress the importance of stratified epidemiological investigations in personalized medicine.

  20. Linear pulse motor type control element drive mechanism for the integral reactor

    International Nuclear Information System (INIS)

    Yu, J. Y.; Choi, S.; Kim, J. H.; Huh, H.; Park, K. B.

    2007-01-01

    The integral reactor SMART currently under development at Korea Atomic Energy Research Institute is designed with soluble boron free operation and use of nuclear heating for reactor startup. These design features require the Control Element Drive Mechanism (CEDM) for SMART to have fine-step movement capability as well as high reliability for the fine reactivity control. In this paper, design characteristics of a new concept CEDM driven by the Linear Pulse Motor (LPM) which meets the design requirements of the integral reactor SMART are introduced. The primary dimensions of the linear pulse motor are determined by the electro-magnetic analysis and the results are also presented. In parallel with the electro-magnetic analysis, the conceptual design of the CEDM is visualized and checked for interferences among parts by assembling three dimensional (3D) models on the computer. Prototype of LPM with double air-gaps for the CEDM sub-assemblies to lift 100 kg is designed, analysed, manufactured and tested to confirm the validity of the CEDM design concept. A converter and a test facility are manufactured to verify the dynamic performance of the LPM. The mover of the LPM is welded with ferromagnetic material and non-ferromagnetic material to get the magnetic flux path between inner stator and outer stator. The thrust forces of LPM predicted by analytic model have shown good agreement with experimental results from the prototype LPM. It is found that the LPM type CEDM has high force density and simple drive mechanism to reduce volume and satisfy the reactor operating circumstances with high pressure and temperature

  1. Controllable Molecular Packing Motif and Overlap Type in Organic Nanomaterials for Advanced Optical Properties

    Directory of Open Access Journals (Sweden)

    Taoyu Zou

    2018-01-01

    Full Text Available The optical properties of organic materials are very sensitive to subtle structural modification, and a proper understanding of the structure-property relationship is essential to improve the performance of organic electronic devices. The phase transitions of the η-CuPc to the α-CuPc, then to the β-CuPc were investigated using In situ X-ray diffraction and the differential scanning calorimetry (DSC. The five stages in the phase-transition process from low to high-temperature were observed, which consisted of (1 the η-CuPc; (2 a mixture of the η- and α-CuPc; (3 a mixture of the η-, α- and β-CuPc; (4 a mixture of the α- and β-CuPc; and (5 the β-CuPc. The vibrational and optical properties at different phase-transition stages were correlated to molecular packing motif and molecule overlap type through systematic analyses of the Fourier–transform infrared, Raman and UV-VIS spectra. Moreover, the mechanism for the morphology evolution was also discussed in detail.

  2. Assessing the performance of an advanced integrated facade by means of simulation: The ACTRESS facade case study

    Directory of Open Access Journals (Sweden)

    Fabio Favoino

    2015-11-01

    Full Text Available The growing demand for both building energy efficiency and indoor environmental comfort is leading to a substantial evolution of the traditional concept of the building envelope. The future building skin is required to be responsive and dynamic, actively regulating the flows of heat, light, air and water from outdoor to indoor and vice versa, in order to effectively respond to ever-changing climatic conditions, occupant comfort and energy efficiency requirements. In the framework of a decade-long research activity on Advanced Integrated Facade, AIF, a new Multifunctional Facade Module called ACTRESS has been conceived: the ACTive, RESponsive and Solar envelope is designedto play different roles through its ability to change its thermo-physical behaviour in order to suit the different environmental conditions. This paper briefly illustrates the ACTRESS MFM concept and its functional strategies, focusing on the simulation and the assessment of the performance of such a dynamic envelope. The numerical study was conducted in order to evaluate the potential energy savings achievable with such a facade and to evaluate different functional strategies and options. The evaluation of the performance in terms of energy savings was done at both component and whole-building level. Moreover this work presents an example of the applicability of Building Performance Simulation tools to the design of an innovative and dynamic facade system, discussing the capability of BPS software in simulating and evaluating the performance of such systems. The results show that the ACTRESS MFM can effectively reduce the total primary energy consumption of an office building up to 55% compared with a reference facade complying with national regulations. On the other hand modelling assumptions and simplifications are needed in order to evaluate the performance of such a system with BPS software, representing a barrier to the design and the adoption of advanced facade systems in

  3. Recent advance in high manufacturing readiness level and high temperature CMOS mixed-signal integrated circuits on silicon carbide

    Science.gov (United States)

    Weng, M. H.; Clark, D. T.; Wright, S. N.; Gordon, D. L.; Duncan, M. A.; Kirkham, S. J.; Idris, M. I.; Chan, H. K.; Young, R. A. R.; Ramsay, E. P.; Wright, N. G.; Horsfall, A. B.

    2017-05-01

    A high manufacturing readiness level silicon carbide (SiC) CMOS technology is presented. The unique process flow enables the monolithic integration of pMOS and nMOS transistors with passive circuit elements capable of operation at temperatures of 300 °C and beyond. Critical to this functionality is the behaviour of the gate dielectric and data for high temperature capacitance-voltage measurements are reported for SiO2/4H-SiC (n and p type) MOS structures. In addition, a summary of the long term reliability for a range of structures including contact chains to both n-type and p-type SiC, as well as simple logic circuits is presented, showing function after 2000 h at 300 °C. Circuit data is also presented for the performance of digital logic devices, a 4 to 1 analogue multiplexer and a configurable timer operating over a wide temperature range. A high temperature micro-oven system has been utilised to enable the high temperature testing and stressing of units assembled in ceramic dual in line packages, including a high temperature small form-factor SiC based bridge leg power module prototype, operated for over 1000 h at 300 °C. The data presented show that SiC CMOS is a key enabling technology in high temperature integrated circuit design. In particular it provides the ability to realise sensor interface circuits capable of operating above 300 °C, accommodate shifts in key parameters enabling deployment in applications including automotive, aerospace and deep well drilling.

  4. Changes in reactivity and in the margins to thermal limits by the inclusion of control rods of advanced type in the Laguna Verde Power plant

    International Nuclear Information System (INIS)

    Hernandez, J.L.; Perusquia, R.; Montes, J.L.; Ortiz, J.J.; Ramirez, J.R.

    2004-01-01

    The obtained results are presented when simulating with CM-PRESTO code the cycle 10 of the unit 1 of the Laguna Verde Central, using two advanced types of control bars, besides the originally loaded ones. The two advanced types, to those that are denominated 1AV and 2AV in this work, are of different design, however both have in some place of the bar, a section with hafnium like neutron absorber material. They thought about three different scenarios, in the first one, used as reference, is simulated the cycle 10 using the original control bars, while in the other two cases the advanced types are used. The values of the reactivity were compared and of some margins to the thermal limits obtained when using the bars of advanced type, with those obtained in the case in that alone they are considered those original bars. It was found that in condition of power both advanced types present bigger absorber power of neutrons that the original bars, being quantified in average this bigger power in 0.22 pcm/notch for the type 1AV and in 0.51 pcm/notch for the type 2AV. The affectation of the margins to the observed thermal limits is minimum. (Author)

  5. Modeling and Inversion of Magnetic Anomalies Caused by Sediment–Basement Interface Using Three-Dimensional Cauchy-Type Integrals

    DEFF Research Database (Denmark)

    Cai, Hongzhu; Zhdanov, Michael

    2014-01-01

    This letter introduces a new method for the modeling and inversion of magnetic anomalies caused by crystalline basements. The method is based on the 3-D Cauchy-type integral representation of the magnetic field. Traditional methods use volume integrals over the domains occupied by anomalous...... is particularly significant in solving problems of the modeling and inversion of magnetic data for the depth to the basement. In this letter, a novel method is proposed, which only requires discretizing the magnetic contrast surface for modeling and inversion. We demonstrate the method using several synthetic...... susceptibility and on the prismatic representation of the volumes with an anomalous susceptibility distribution. Such discretization is computationally expensive, particularly in 3-D cases. The technique of Cauchy-type integrals makes it possible to represent the magnetic field as surface integrals, which...

  6. Studies on methods and techniques of weak information extraction and integrated evaluation for sandstone-type uranium deposits

    International Nuclear Information System (INIS)

    Han Shaoyang; Ke Dan; Hou Huiqun; Hu Shuiqing

    2004-01-01

    Weak information extraction and integrated evaluation for sandstone-type uranium deposits are currently one of the important research contents in uranium exploration. Through several years researches, the authors put forward the meaning of aeromagnetic and aeroradioactive weak information extraction, study the formation theories of aeromagnetic and aeroradioactive weak information and establish effective mathematic models for weak information extraction. Based on GIS software, models of weak information extraction are actualized and the expert-grading model for integrated evaluation is developed. The trial of aeromagnetic and aeroradioactive weak information and integrated evaluation of uranium resources are completed by using GIS software in the study area. The researchful results prove that techniques of weak information extraction and integrated evaluation may further delineate the prospective areas of sandstone-type uranium deposits rapidly and improve the predicitive precision. (authors)

  7. IMRT With Simultaneous Integrated Boost and Concurrent Chemotherapy for Locoregionally Advanced Squamous Cell Carcinoma of the Head and Neck

    International Nuclear Information System (INIS)

    Montejo, Michael E.; Shrieve, Dennis C.; Bentz, Brandon G.; Hunt, Jason P.; Buchman, Luke O.; Agarwal, Neeraj; Hitchcock, Ying J.

    2011-01-01

    Purpose: To evaluate the efficacy and toxicity of accelerated radiotherapy with concurrent chemotherapy in advanced head-and-neck squamous cell carcinoma. Methods and Materials: Between April 2003 and May 2008, 43 consecutive patients with advanced head-and-neck squamous cell carcinoma received accelerated chemoradiation with concurrent cisplatin or cetuximab. The doses for intensity-modulated radiotherapy with simultaneous integrated boost were 67.5, 60.0, and 54 Gy in 30 daily fractions of 2.25, 2.0, and 1.8 Gy to the planning target volumes for gross disease, high-risk nodes, and low-risk nodes, respectively. Results: Of the patients, 90.7% completed chemoradiotherapy as prescribed. The median treatment duration was 43 days (range, 38–55 days). The complete response rate was 74.4%. With median follow-up of 36.7 months (range, 16.8–78.1 months) in living patients, the estimated 1-, 2-, and 5-year locoregional control, overall survival, and disease-free survival rates were 82%, 82%, and 82%; 73%, 65%, and 61%; and 73%, 73%, and 70%, respectively. One treatment-related death occurred from renal failure. Grade 3 mucositis and dermatitis occurred in 13 patients (30.2%) and 3 patients (6.9%), respectively. Grade 2 xerostomia occurred in 12 patients (27.9%). In patients with adequate follow-up, 82% were feeding tube free by 6 months after therapy; 13% remained feeding tube dependent at 1 year. Grade 3 soft-tissue fibrosis, esophageal stricture, osteoradionecrosis, and trismus occurred in 3 patients (6.9%), 5 patients (11.6%), 1 patient (2.3%), and 3 patients (6.9%), respectively. Conclusions: Our results show that intensity-modulated radiotherapy with simultaneous integrated boost with concurrent chemotherapy improved local and regional control. Acute and late toxicities were tolerable and acceptable. A prospective trial of this fractionation regimen is necessary for further assessment of its efficacy and toxicity compared with other approaches.

  8. IMRT With Simultaneous Integrated Boost and Concurrent Chemotherapy for Locoregionally Advanced Squamous Cell Carcinoma of the Head and Neck

    Energy Technology Data Exchange (ETDEWEB)

    Montejo, Michael E.; Shrieve, Dennis C. [Department of Radiation Oncology, Huntsman Cancer Hospital, University of Utah, Salt Lake City, Utah (United States); Bentz, Brandon G.; Hunt, Jason P.; Buchman, Luke O. [Division of Otolaryngology-Head Neck Surgery, Department of Surgery, Huntsman Cancer Hospital, University of Utah, Salt Lake City, Utah (United States); Agarwal, Neeraj [Department of Internal Medicine, Oncology Division, Huntsman Cancer Hospital, University of Utah, Salt Lake City, Utah (United States); Hitchcock, Ying J., E-mail: ying.hitchcock@hci.utah.edu [Department of Radiation Oncology, Huntsman Cancer Hospital, University of Utah, Salt Lake City, Utah (United States)

    2011-12-01

    Purpose: To evaluate the efficacy and toxicity of accelerated radiotherapy with concurrent chemotherapy in advanced head-and-neck squamous cell carcinoma. Methods and Materials: Between April 2003 and May 2008, 43 consecutive patients with advanced head-and-neck squamous cell carcinoma received accelerated chemoradiation with concurrent cisplatin or cetuximab. The doses for intensity-modulated radiotherapy with simultaneous integrated boost were 67.5, 60.0, and 54 Gy in 30 daily fractions of 2.25, 2.0, and 1.8 Gy to the planning target volumes for gross disease, high-risk nodes, and low-risk nodes, respectively. Results: Of the patients, 90.7% completed chemoradiotherapy as prescribed. The median treatment duration was 43 days (range, 38-55 days). The complete response rate was 74.4%. With median follow-up of 36.7 months (range, 16.8-78.1 months) in living patients, the estimated 1-, 2-, and 5-year locoregional control, overall survival, and disease-free survival rates were 82%, 82%, and 82%; 73%, 65%, and 61%; and 73%, 73%, and 70%, respectively. One treatment-related death occurred from renal failure. Grade 3 mucositis and dermatitis occurred in 13 patients (30.2%) and 3 patients (6.9%), respectively. Grade 2 xerostomia occurred in 12 patients (27.9%). In patients with adequate follow-up, 82% were feeding tube free by 6 months after therapy; 13% remained feeding tube dependent at 1 year. Grade 3 soft-tissue fibrosis, esophageal stricture, osteoradionecrosis, and trismus occurred in 3 patients (6.9%), 5 patients (11.6%), 1 patient (2.3%), and 3 patients (6.9%), respectively. Conclusions: Our results show that intensity-modulated radiotherapy with simultaneous integrated boost with concurrent chemotherapy improved local and regional control. Acute and late toxicities were tolerable and acceptable. A prospective trial of this fractionation regimen is necessary for further assessment of its efficacy and toxicity compared with other approaches.

  9. Advanced Analytic Treatment and Efficient Computation of the Diffraction Integrals in the Extended Nijboer-Zernike Theory

    Science.gov (United States)

    van Haver, S.; Janssen, A. J. E. M.

    2013-07-01

    The computational methods for the diffraction integrals that occur in the Extended Nijboer-Zernike (ENZ-) approach to circular, aberrated, defocused optical systems are reviewed and updated. In the ENZ-approach, the Debye approximation of Rayleigh's integral for the through-focus, complex, point-spread function is evaluated in semi-analytic form. To this end, the generalized pupil function, comprising phase aberrations as well as amplitude non-uniformities, is assumed to be expanded into a series of Zernike circle polynomials, and the contribution of each of these Zernike terms to the diffraction integral is expressed in the form of a rapidly converging series (containing power functions and/or Bessel functions of various kinds). The procedure of expressing the through-focus point-spread function in terms of Zernike expansion coefficients of the pupil function can be reversed and has led to the ENZ-method of retrieval of pupil functions from measured through-focus (inte! nsity) point-spread functions. The review and update concern the computation for systems ranging from as basic as having low NA and small defocus parameter to high-NA systems, with vector fields and polarization, meant for imaging of extended objects into a multi-layered focal region. In the period 2002-2010, the evolution of the form of the diffraction integral (DI) was dictated by the agenda of the ENZ-team in which a next instance of the DI was handled by amending the computation scheme of the previous one. This has resulted into a variety of ad hoc measures, lack of transparency of the schemes, and sometimes prohibitively slow computer codes. It is the aim of the present paper to reconstruct the whole building of computation methods, using consistently more advanced mathematical tools. These tools are -explicit Zernike expansion of the focal factor in the DI, -Clebsch-Gordan coefficients for the omnipresent problem of linearizing products ofZernike circle polynomials, -recursions for Bessel

  10. The impact of type and number of bowel resections on anastomotic leakage risk in advanced ovarian cancer surgery.

    Science.gov (United States)

    Grimm, Christoph; Harter, Philipp; Alesina, Pier F; Prader, Sonia; Schneider, Stephanie; Ataseven, Beyhan; Meier, Beate; Brunkhorst, Violetta; Hinrichs, Jakob; Kurzeder, Christian; Heitz, Florian; Kahl, Annett; Traut, Alexander; Groeben, Harald T; Walz, Martin; du Bois, Andreas

    2017-09-01

    To identify risk factors for anastomotic leakage (AL) in patients undergoing primary advanced ovarian cancer surgery and to evaluate the prognostic implication of AL on overall survival in these patients. We analyzed our institutional database for primary EOC and included all consecutive patients treated by debulking surgery including any type of full circumferential bowel resection beyond appendectomy between 1999 and 2015. We performed logistic regression models to identify risk factors for AL and log-rank tests and Cox proportional hazards models to evaluate the association between AL and survival. AL occurred in 36/800 (4.5%; 95% confidence interval [3%-6%]) of all patients with advanced ovarian cancer and 36/518 (6.9% [5%-9%]) patients undergoing bowel resection during debulking surgery. One hundred fifty-six (30.1%) patients had multiple bowel resections. In these patients, AL rate per patient was only slightly higher (9.0% [5%-13%]) than in patients with rectosigmoid resection only (6.9% [4%-10%]), despite the higher number of anastomosis. No independent predictive factors for AL were identified. AL was independently associated with shortened overall survival (HR 1.9 [1.2-3.4], p=0.01). In the present study, no predictive pre- and/or intraoperative risk factors for AL were identified. AL rate was mainly influenced by rectosigmoid resection and only marginally increased by additional bowel resections. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Integrating Remote Sensing Data, Hybrid-Cloud Computing, and Event Notifications for Advanced Rapid Imaging & Analysis (Invited)

    Science.gov (United States)

    Hua, H.; Owen, S. E.; Yun, S.; Lundgren, P.; Fielding, E. J.; Agram, P.; Manipon, G.; Stough, T. M.; Simons, M.; Rosen, P. A.; Wilson, B. D.; Poland, M. P.; Cervelli, P. F.; Cruz, J.

    2013-12-01

    Space-based geodetic measurement techniques such as Interferometric Synthetic Aperture Radar (InSAR) and Continuous Global Positioning System (CGPS) are now important elements in our toolset for monitoring earthquake-generating faults, volcanic eruptions, hurricane damage, landslides, reservoir subsidence, and other natural and man-made hazards. Geodetic imaging's unique ability to capture surface deformation with high spatial and temporal resolution has revolutionized both earthquake science and volcanology. Continuous monitoring of surface deformation and surface change before, during, and after natural hazards improves decision-making from better forecasts, increased situational awareness, and more informed recovery. However, analyses of InSAR and GPS data sets are currently handcrafted following events and are not generated rapidly and reliably enough for use in operational response to natural disasters. Additionally, the sheer data volumes needed to handle a continuous stream of InSAR data sets also presents a bottleneck. It has been estimated that continuous processing of InSAR coverage of California alone over 3-years would reach PB-scale data volumes. Our Advanced Rapid Imaging and Analysis for Monitoring Hazards (ARIA-MH) science data system enables both science and decision-making communities to monitor areas of interest with derived geodetic data products via seamless data preparation, processing, discovery, and access. We will present our findings on the use of hybrid-cloud computing to improve the timely processing and delivery of geodetic data products, integrating event notifications from USGS to improve the timely processing for response, as well as providing browse results for quick looks with other tools for integrative analysis.

  12. An integrated fuzzy-based advanced eutrophication simulation model to develop the best management scenarios for a river basin.

    Science.gov (United States)

    Srinivas, Rallapalli; Singh, Ajit Pratap

    2018-03-01

    Assessment of water quality status of a river with respect to its discharge has become prerequisite to sustainable river basin management. The present paper develops an integrated model for simulating and evaluating strategies for water quality management in a river basin management by controlling point source pollutant loadings and operations of multi-purpose projects. Water Quality Analysis and Simulation Program (WASP version 8.0) has been used for modeling the transport of pollutant loadings and their impact on water quality in the river. The study presents a novel approach of integrating fuzzy set theory with an "advanced eutrophication" model to simulate the transmission and distribution of several interrelated water quality variables and their bio-physiochemical processes in an effective manner in the Ganges river basin, India. After calibration, simulated values are compared with the observed values to validate the model's robustness. Fuzzy technique of order preference by similarity to ideal solution (F-TOPSIS) has been used to incorporate the uncertainty associated with the water quality simulation results. The model also simulates five different scenarios for pollution reduction, to determine the maximum pollutant loadings during monsoon and dry periods. The final results clearly indicate how modeled reduction in the rate of wastewater discharge has reduced impacts of pollutants in the downstream. Scenarios suggesting a river discharge rate of 1500 m 3 /s during the lean period, in addition to 25 and 50% reduction in the load rate, are found to be the most effective option to restore quality of river Ganges. Thus, the model serves as an important hydrologic tool to the policy makers by suggesting appropriate remediation action plans.

  13. Reflectance and Polarization Characteristics of Various Vegetation Types: an Advanced Experimental Approach using the FIGIFIGO Goniospectrometer

    Science.gov (United States)

    Gritsevich, M.; Peltoniemi, J.; Zubko, N.; Pisek, J.

    2016-12-01

    To reduce data acquired by Earth Observation projects and for collecting more accurate knowledge on the Earth, universe, and environment one needs to provide a set of reliable references carefully gathered by measuring various known, well characterized targets. We present an overview of the Finnish Geodetic Institute's field goniospectrometer, FIGIFIGO, and highlight its capabilities for spectropolarimetric measurements of various samples, both under actual field conditions and in the laboratory. The design concept of this custom made instrument has proven to have a number of advantages, such as a well designed, user friendly interface, a high level of automation, and an excellent adaptability to a wide range of weather conditions during field measurements. The instrument communicates via a control computer which has a simple user-friendly interface. It is battery powered and very portable, making it feasible to transport it by plane, car, boat, or sledge. The system includes a sky camera to detect the orientation of the goniometer and a pyranometer to monitor the synchronous illumination conditions. The instrument's mirror can be finely adjusted to apply small spatial corrections to the optical chain. The foreoptics is connected to an ASD FieldSpec Pro FR 350-2500 nm spectroradiometer by an optical fiber. A calcite Glan-Thompson prism is used as a polarizer, covering the full spectral range with better than 1% accuracy.FIGIFIGO has been used to measure the reflectance properties of hundreds of different targets, including various vegetation types. In particular, it has been shown that directional and polarization signals vary largely between different species, and provide information about the leaf surface and orientation. The measurement data are stored in the FGI's Reflectance Library and new specific measurements are made upon request. The potential use of the results from these measurements are diverse; including their use as ground truth references for Earth

  14. Integrated Data Collection Analysis (IDCA) Program - RDX Type II Class 5 Standard, Data Set 1

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pollard, Colin J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Sorenson, Daniel N. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Moran, Jesse S. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Shelley, Timothy J. [Air Force Research Lab. (AFRL), Tyndall AFB, FL (United States); Reyes, Jose A. [Applied Research Associates, Inc., Tyndall AFB, FL (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whipple, Richard E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-04-11

    This document describes the results of the first reference sample material—RDX Type II Class 5—examined in the proficiency study for small-scale safety and thermal (SSST) testing of explosive materials for the Integrated Data Collection Analysis (IDCA) Program. The IDCA program is conducting proficiency testing on homemade explosives (HMEs). The reference sample materials are being studied to establish the accuracy of traditional explosives safety testing for each performing laboratory. These results will be used for comparison to results from testing HMEs. This effort, funded by the Department of Homeland Security (DHS), ultimately will put the issues of safe handling of these materials in perspective with standard military explosives. The results of the study will add SSST testing results for a broad suite of different HMEs to the literature, potentially suggest new guidelines and methods for HME testing, and possibly establish what are the needed accuracies in SSST testing to develop safe handling practices. Described here are the results for impact, friction, electrostatic discharge, and scanning calorimetry analysis of a reference sample of RDX Type II Class 5. The results from each participating testing laboratory are compared using identical test material and preparation methods wherever possible. Note, however, the test procedures differ among the laboratories. These results are then compared to historical data from various sources. The performers involved are Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Air Force Research Laboratory/ RXQL (AFRL), Indian Head Division, Naval Surface Warfare Center, (IHD-NSWC), and Sandia National Laboratories (SNL). These tests are conducted as a proficiency study in order to establish some consistency in test protocols, procedures, and experiments and to understand how to compare results when test protocols are not identical.

  15. Simulating propagation of coherent light in random media using the Fredholm type integral equation

    Science.gov (United States)

    Kraszewski, Maciej; Pluciński, Jerzy

    2017-06-01

    Studying propagation of light in random scattering materials is important for both basic and applied research. Such studies often require usage of numerical method for simulating behavior of light beams in random media. However, if such simulations require consideration of coherence properties of light, they may become a complex numerical problems. There are well established methods for simulating multiple scattering of light (e.g. Radiative Transfer Theory and Monte Carlo methods) but they do not treat coherence properties of light directly. Some variations of these methods allows to predict behavior of coherent light but only for an averaged realization of the scattering medium. This limits their application in studying many physical phenomena connected to a specific distribution of scattering particles (e.g. laser speckle). In general, numerical simulation of coherent light propagation in a specific realization of random medium is a time- and memory-consuming problem. The goal of the presented research was to develop new efficient method for solving this problem. The method, presented in our earlier works, is based on solving the Fredholm type integral equation, which describes multiple light scattering process. This equation can be discretized and solved numerically using various algorithms e.g. by direct solving the corresponding linear equations system, as well as by using iterative or Monte Carlo solvers. Here we present recent development of this method including its comparison with well-known analytical results and a finite-difference type simulations. We also present extension of the method for problems of multiple scattering of a polarized light on large spherical particles that joins presented mathematical formalism with Mie theory.

  16. The Effects upon Advanced Placement Licensed Vocational Nursing Students When Integrated with Generic Students in the Second Year of a Registered Nursing Program.

    Science.gov (United States)

    Balint, Marilyn

    A study was conducted to evaluate the effect of integrating advanced placement licensed vocational nursing (APLVN) students with generic students in the second year of the registered nursing program at Long Beach City College. It was hypothesized that the academic achievement of the APLVN students who were taught as a separate group for the first…

  17. Nonlinear Integral Type Observer Design for State Estimation and Unknown Input Reconstruction

    Directory of Open Access Journals (Sweden)

    Chao-Chung Peng

    2017-01-01

    Full Text Available This paper is concerned with model-based robust observer designs for state observation and its application for unknown input reconstruction. Firstly, a sliding mode observer (SMO, which provides exponential convergence of estimation error, is designed for a class of multivariable perturbed systems. Observer gain matrices subject to specific structures are going to be imposed such that the unknown perturbation will not affect estimate precision during the sliding modes; Secondly, to improve discontinuous control induced in the SMO as well as pursue asymptotic estimate precision, a proportional-integral type observer (PIO is further developed. Both the design procedures of the SMO and PIO algorithms are characterized as feasibility issues of linear matrix inequality (LMI and thus the computations of the control parameters can be efficiently solved. Compared with the SMO, it will be demonstrated that the PIO is capable of achieving better estimation precision as long as the unknown inputs are continuous. Finally, a servo-drive flexible robot arm is selected as an example to demonstrate the applications of the robust observer designs.

  18. Diet, Inflammation, and Glycemic Control in Type 2 Diabetes: An Integrative Review of the Literature

    Directory of Open Access Journals (Sweden)

    Sarah Y. Nowlin

    2012-01-01

    Full Text Available Type 2 diabetes (T2D is a growing national health problem affecting 35% of adults ≥20 years of age in the United States. Recently, diabetes has been categorized as an inflammatory disease, sharing many of the adverse outcomes as those reported from cardiovascular disease. Medical nutrition therapy is recommended for the treatment of diabetes; however, these recommendations have not been updated to target the inflammatory component, which can be affected by diet and lifestyle. To assess the current state of evidence for which dietary programs contain the most anti-inflammatory and glycemic control properties for patients with T2D, we conducted an integrative review of the literature. A comprehensive search of the PubMed, CINAHL, Scopus, and Web of Science databases from January 2000 to May 2012 yielded 786 articles. The final 16 studies met the selection criteria including randomized control trials, quasiexperimental, or cross-sectional studies that compared varying diets and measured inflammatory markers. The Mediterranean and DASH diets along with several low-fat diets were associated with lower inflammatory markers. The Mediterranean diet demonstrated the most clinically significant reduction in glycosylated hemoglobin (HbA1c. Information on best dietary guidelines for inflammation and glycemic control in individuals with T2D is lacking. Continued research is warranted.

  19. Aboriginal research coalition externalities associated with energy production: Types, measures and integration

    International Nuclear Information System (INIS)

    Goodman, I.

    1992-01-01

    A system that has evolved to determine the environmental externalities associated with energy generation is described. The system involves identification and understanding of the activity being considered (power generation from a specific type of plant), effects such as air pollution, measures such as pollution control that can influence the levels of the preceding effects, the resources affected, impacts on human resource uses, and the values humans place on the use of the resources. Considerations in estimating external costs are then discussed. These include property rights, air emissions, electromagnetic fields, pollution control effectiveness and costs, valuation of air emissions, water quality and quantity, effects on fisheries and recreational activities, and effects of dams and inundation. A least-cost, or integrated management process, selects the combination of electricity supply and demand sources that have the least social cost. Total externality costs are estimated, based on emissions or effects from each source multiplied by unit costs, and control measures selected. The external costs are combined with the usual fixed and variable cost calculations to provide a total social cost measure. This monetization procedure allows a complete accounting of all costs to society on an equal basis. 53 refs., 4 figs

  20. Runge–Kutta type methods with special properties for the numerical integration of ordinary differential equations

    International Nuclear Information System (INIS)

    Kalogiratou, Z.; Monovasilis, Th.; Psihoyios, G.; Simos, T.E.

    2014-01-01

    In this work we review single step methods of the Runge–Kutta type with special properties. Among them are methods specially tuned to integrate problems that exhibit a pronounced oscillatory character and such problems arise often in celestial mechanics and quantum mechanics. Symplectic methods, exponentially and trigonometrically fitted methods, minimum phase-lag and phase-fitted methods are presented. These are Runge–Kutta, Runge–Kutta–Nyström and Partitioned Runge–Kutta methods. The theory of constructing such methods is given as well as several specific methods. In order to present the performance of the methods we have tested 58 methods from all categories. We consider the two dimensional harmonic oscillator, the two body problem, the pendulum problem and the orbital problem studied by Stiefel and Bettis. Also we have tested the methods on the computation of the eigenvalues of the one dimensional time independent Schrödinger equation with the harmonic oscillator, the doubly anharmonic oscillator and the exponential potentials