WorldWideScience

Sample records for advanced bragg gratings

  1. UV writing of advanced Bragg gratings in optical waveguides

    DEFF Research Database (Denmark)

    Jensen, Jesper Bo Damm

    2002-01-01

    were then translated into a polarizer angle profile and the Bragg grating were written using a pulsed excimer laser. Only optical fibers were used in this part of the thesis. The high quality planar waveguides used during the study were produced in the cleanroom facility at the Microelectronic Center...

  2. Fiber Bragg grating sensors

    NARCIS (Netherlands)

    Cheng, L.K.; Nieuwland, R.A.; Toet, P.M.; Agovic, K.

    2010-01-01

    A brief overview of fiber Bragg grating based sensor technology from sensor head, read out unit and commercial applications is given. Fiber Bragg grating based sensor systems are becoming mature rapidly. Components for commercial pressure sensors and temperature sensors are available and slowly gett

  3. Bragg gratings in Topas

    DEFF Research Database (Denmark)

    Zhang, C.; Webb, D.J.; Kalli, K.;

    We report for the first time fibre Bragg grating inscription in microstructured optical fibre fabricated from Topas® cyclic olefin copolymer. The temperature sensitivity of the grating was studied revealing a positive Bragg wavelength shift of approximately 0.8 nmK-1,the largest sensitivity yet...

  4. Bragg grating rogue wave

    CERN Document Server

    Degasperis, Antonio; Aceves, Alejandro B

    2015-01-01

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing, may lead to extreme waves at extremely low powers.

  5. Bragg grating rogue wave

    Energy Technology Data Exchange (ETDEWEB)

    Degasperis, Antonio [Dipartimento di Fisica, “Sapienza” Università di Roma, P.le A. Moro 2, 00185 Roma (Italy); Wabnitz, Stefan, E-mail: stefan.wabnitz@unibs.it [Dipartimento di Ingegneria dell' Informazione, Università degli Studi di Brescia and INO-CNR, via Branze 38, 25123 Brescia (Italy); Aceves, Alejandro B. [Southern Methodist University, Dallas (United States)

    2015-06-12

    We derive the rogue wave solution of the classical massive Thirring model, that describes nonlinear optical pulse propagation in Bragg gratings. Combining electromagnetically induced transparency with Bragg scattering four-wave mixing may lead to extreme waves at extremely low powers.

  6. Supersymmetric Bragg gratings

    CERN Document Server

    Longhi, Stefano

    2015-01-01

    The supersymmetric (SUSY) structure of coupled-mode equations that describe scattering of optical waves in one-dimensional Bragg gratings is highlighted. This property can find applications to the synthesis of special Bragg filters and distributed-feedback (DFB) optical cavities. In particular, multiple SUSY (Darboux-Crum) transformations can be used to synthesize DFB filters with any desired number of resonances at target frequencies. As an example, we describe the design of a DFB structure with a set of equally-spaced resonances, i.e. a frequency comb transmission filter.

  7. Supersymmetric Bragg gratings

    International Nuclear Information System (INIS)

    The supersymmetric (SUSY) structure of coupled-mode equations that describe scattering of optical waves in one-dimensional Bragg gratings is highlighted. This property can find applications to the synthesis of special Bragg filters and distributed-feedback (DFB) optical cavities. In particular, multiple SUSY (Darboux–Crum) transformations can be used to synthesize DFB filters with any desired number of resonances at target frequencies. As an example, we describe the design of a DFB structure with a set of equally-spaced resonances, i.e. a frequency comb transmission filter. (paper)

  8. High Neutron Fluence Survivability Testing of Advanced Fiber Bragg Grating Sensors

    International Nuclear Information System (INIS)

    The motivation for the reported research was to support NASA space nuclear power initiatives through the development of advanced fiber optic sensors for space-based nuclear power applications. The purpose of the high-neutron fluence testing was to demonstrate the survivability of fiber Bragg grating (FBG) sensors in a fission reactor environment. 520 FBGs were installed in the Ford reactor at the University of Michigan. The reactor was operated for 1012 effective full power hours resulting in a maximum neutron fluence of approximately 5x1019 n/cm2, and a maximum gamma dose of 2x103 MGy gamma. This work is significant in that, to the knowledge of the authors, the exposure levels obtained are approximately 1000 times higher than for any previously published experiment. Four different fiber compositions were evaluated. An 87% survival rate was observed for fiber Bragg gratings located at the fuel centerline. Optical Frequency Domain Reflectometry (OFDR), originally developed at the NASA Langley Research Center, can be used to interrogate several thousand low-reflectivity FBG strain and/or temperature sensors along a single optical fiber. A key advantage of the OFDR sensor technology for space nuclear power is the extremely low mass of the sensor, which consists of only a silica fiber 125μm in diameter. The sensors produced using this technology will fill applications in nuclear power for current reactor plants, emerging Generation-IV reactors, and for space nuclear power. The reported research was conducted by Luna Innovations and was funded through a Small Business Innovative Research (SBIR) contract with the NASA Glenn Research Center

  9. MEMS Bragg grating force sensor

    DEFF Research Database (Denmark)

    Reck, Kasper; Thomsen, Erik Vilain; Hansen, Ole

    2011-01-01

    We present modeling, design, fabrication and characterization of a new type of all-optical frequency modulated MEMS force sensor based on a mechanically amplified double clamped waveguide beam structure with integrated Bragg grating. The sensor is ideally suited for force measurements in harsh...... environments and for remote and distributed sensing and has a measured sensitivity of -14 nm/N, which is several times higher than what is obtained in conventional fiber Bragg grating force sensors. © 2011 Optical Society of America....

  10. Polymer optical fiber bragg grating sensors

    DEFF Research Database (Denmark)

    Stefani, Alessio; Yuan, Scott Wu; Andresen, Søren;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings are reported. We have written fiber Bragg gratings for 1550 nm and 850 nm operations, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  11. Fiber Bragg Grating Sensors for Harsh Environments

    Directory of Open Access Journals (Sweden)

    Stephen J. Mihailov

    2012-02-01

    Full Text Available Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on regeneration techniques and femtosecond infrared laser processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This paper will present a review of some of the more recent developments.

  12. Advanced Interrogation of Fiber-Optic Bragg Grating and Fabry-Perot Sensors with KLT Analysis

    Directory of Open Access Journals (Sweden)

    Daniele Tosi

    2015-10-01

    Full Text Available The Karhunen-Loeve Transform (KLT is applied to accurate detection of optical fiber sensors in the spectral domain. By processing an optical spectrum, although coarsely sampled, through the KLT, and subsequently processing the obtained eigenvalues, it is possible to decode a plurality of optical sensor results. The KLT returns higher accuracy than other demodulation techniques, despite coarse sampling, and exhibits higher resilience to noise. Three case studies of KLT-based processing are presented, representing most of the current challenges in optical fiber sensing: (1 demodulation of individual sensors, such as Fiber Bragg Gratings (FBGs and Fabry-Perot Interferometers (FPIs; (2 demodulation of dual (FBG/FPI sensors; (3 application of reverse KLT to isolate different sensors operating on the same spectrum. A simulative outline is provided to demonstrate the KLT operation and estimate performance; a brief experimental section is also provided to validate accurate FBG and FPI decoding.

  13. Advanced Interrogation of Fiber-Optic Bragg Grating and Fabry-Perot Sensors with KLT Analysis.

    Science.gov (United States)

    Tosi, Daniele

    2015-10-29

    The Karhunen-Loeve Transform (KLT) is applied to accurate detection of optical fiber sensors in the spectral domain. By processing an optical spectrum, although coarsely sampled, through the KLT, and subsequently processing the obtained eigenvalues, it is possible to decode a plurality of optical sensor results. The KLT returns higher accuracy than other demodulation techniques, despite coarse sampling, and exhibits higher resilience to noise. Three case studies of KLT-based processing are presented, representing most of the current challenges in optical fiber sensing: (1) demodulation of individual sensors, such as Fiber Bragg Gratings (FBGs) and Fabry-Perot Interferometers (FPIs); (2) demodulation of dual (FBG/FPI) sensors; (3) application of reverse KLT to isolate different sensors operating on the same spectrum. A simulative outline is provided to demonstrate the KLT operation and estimate performance; a brief experimental section is also provided to validate accurate FBG and FPI decoding.

  14. Fiber Bragg Grating Based Thermometry

    OpenAIRE

    Ahmed, Zeeshan; Filla, James; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined m...

  15. First order Bragg grating filters in silicon on insulator waveguides

    Science.gov (United States)

    Waugh, Peter Michael

    2008-08-01

    The subject of this project is the design; analysis, fabrication and characterisation of first order Bragg Grating optical filters in Silicon-on-Insulator (SOI) planar waveguides. It is envisaged that this work will result in the possibility of Bragg Grating filters for use in Silicon Photonics. It is the purpose of the work to create as far as is possible flat surface waveguides so as to facilitate Thermo-Optic tuning and also the incorporation into rib-waveguide Silicon Photonics. The spectral response of the shallow Bragg Gratings was modelled using Coupled Mode Theory (CMT) by way of RSoft Gratingmod TM. Also the effect of having a Bragg Grating with alternate layers of refractive index of 1.5 and 3.5 was simulated in order to verify that Silica and Silicon layered Bragg Gratings could be viable. A series of Bragg Gratings were patterned on 1.5 micron SOI at Philips in Eindhoven, Holland to investigate the variation of grating parameters with a) the period of the gratings b) the mark to space ratio of the gratings and c) the length of the region converted to Bragg Gratings (i.e. the number of grating period repetitions). One set of gratings were thermally oxidised at Philips in Eindhoven and another set were ion implanted with Oxygen ions at the Ion Beam Facility, University of Surrey, England. The gratings were tested and found to give transmission minima at approximately 1540 nanometres and both methods of creating flat surfaces were found to give similar minima. Atomic Force Microscopy was applied to the grating area of the as-implanted samples in the Advanced Technology Institute, University of Surrey, which were found to have surface undulations in the order of 60 nanometres.

  16. Fiber Bragg Grating Based Thermometry

    CERN Document Server

    Ahmed, Zeeshan; Guthrie, William; Quintavalle, John

    2016-01-01

    In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over the temperature range of 233 K to 393 K. We demonstrate, in a hermetically sealed dry Argon environment, that FBG devices show a quadratic dependence on temperature with expanded uncertainties (k = 2) of ~500 mK. Our measurements indicate that the combined measurement uncertainty is dominated by uncertainty in determining the peak center fitting and by thermal aging of polyimide coated fibers.

  17. Low-Dispersion Fibre Bragg Gratings Written Using the Polarization Control Method

    DEFF Research Database (Denmark)

    Deyerl, Hans Jürgen; Plougmann, Nikolai; Jensen, Jesper Bo Damm;

    2002-01-01

    We present two fibre Bragg gratings with reduced in-band dispersion for DWDM applications. The gratings were designed by the inverse scattering method and fabricated using the novel polarization control method for UV-writing of advanced gratings.......We present two fibre Bragg gratings with reduced in-band dispersion for DWDM applications. The gratings were designed by the inverse scattering method and fabricated using the novel polarization control method for UV-writing of advanced gratings....

  18. Efficient iterative technique for designing bragg gratings

    DEFF Research Database (Denmark)

    Plougmann, Nikolai; Kristensen, Martin

    2004-01-01

    We present a new iterative method for designing Bragg gratings based on the Levenberg-Marquardt method of minimizing a chi-squared merit function. It is effective for designing both weak and strong gratings and is particularly well suited for unchirped gratings....

  19. Applications of distributed fiber Bragg grating sensors in civil engineering

    Science.gov (United States)

    Nellen, Philipp M.; Broennimann, Rolf; Sennhauser, Urs J.; Askins, Charles G.; Putnam, Martin A.

    1995-09-01

    We report on civil engineering applications of wavelength multiplexed optical-fiber Bragg grating arrays produced directly on the draw tower for testing and surveying advanced structures and material like carbon fiber reinforced concrete elements and prestressing tendons. We equipped a 6 m X 0.9 m X 0.5 m concrete cantilever beam reinforced with carbon fiber lamellas with fiber Bragg grating sensors. Static and dynamic strain levels up to 1500 micrometers /m were measured with a Michelson interferometer used as Fourier spectrometer with resolutions of about 10 micrometers /m for all sensors. Comparative measurements with electrical resistance strain gauges were in good agreement with the fiber optic results. We used the fiber sensors in two different arrangements: some Bragg grating array elements measured the local strain while others were configured in an extensometric way to measure moderate strain over 0.1-1 m.

  20. Characteristics of Smart Concrete with Fiber Optical Bragg Grating Sensor

    Institute of Scientific and Technical Information of China (English)

    XIN Si-jin; JIANG De-sheng; LIANG Lei; Luo Pei; ZUO Jun; NAN Qiu-ming; CHEN Da-xiong

    2004-01-01

    Based on the advantages of the fiber Bragg grating sensing technology, this paper presents a principle of a novel smart concrete with fiber optical Bragg grating sensor, analyses the theory and characteristics,illustrates the key technology and method to make the fiber Bragg grating sensor for the smart concrete, and proves the feasibility with experiments. The results indicate that the smart concrete with fiber Bragg grating sensors is feasible in the structure monitoring and damage diagnosing in the long run.

  1. Fiber Bragg Grating Filter High Temperature Sensors

    Science.gov (United States)

    Lyons, Donald R.; Brass, Eric D.; Pencil, Eric (Technical Monitor)

    2001-01-01

    We present a scaled-down method for determining high temperatures using fiber-based Bragg gratings. Bragg gratings are distributed along the length of the optical fiber, and have high reflectivities whenever the optical wavelength is twice the grating spacing. These spatially distinct Bragg regions (located in the core of a fiber) are sensitive to local temperature changes. Since these fibers are silica-based they are easily affected by localized changes in temperature, which results in changes to both the grating spacing and the wavelength reflectivity. We exploit the shift in wavelength reflectivity to measure the change in the local temperature. Note that the Bragg region (sensing area) is some distance away from where the temperature is being measured. This is done so that we can measure temperatures that are much higher than the damage threshold of the fiber. We do this by affixing the fiber with the Bragg sensor to a material with a well-known coefficient of thermal expansion, and model the heat gradient from the region of interest to the actual sensor. The research described in this paper will culminate in a working device as well as be the second portion of a publication pending submission to Optics Letters.

  2. Sampled phase-shift fiber Bragg gratings

    Institute of Scientific and Technical Information of China (English)

    Xu Wang(王旭); Chongxiu Yu(余重秀); Zhihui Yu(于志辉); Qiang Wu(吴强)

    2004-01-01

    A phase-shift fiber Bragg grating (FBG) with sampling is proposed to generate a multi-channel bandpass filter in the background of multi-channel stopbands. The sampled noire fiber gratings are analyzed by Fourier transform theory first, and then simulation and experiment are performed, the results show that transmission peaks are opened in every reflective channel, the spectrum shape of every channel is identical.It can be used to fabricate multi-wavelength distributed feedback (DFB) fiber laser.

  3. Ultrafast laser inscribed fiber Bragg gratings for sensing applications

    Science.gov (United States)

    Mihailov, Stephen J.

    2016-05-01

    Because of their small size, passive nature, immunity to electromagnetic interference, and capability to directly measure physical parameters such as temperature and strain, fiber Bragg grating sensors have developed beyond a laboratory curiosity and are becoming a mainstream sensing technology. Recently, high temperature stable gratings based on femtosecond infrared laser-material processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This tutorial paper will present a review of some of the more recent developments.

  4. Thermal annealing of tilted fiber Bragg gratings

    Science.gov (United States)

    González-Vila, Á.; Rodríguez-Cobo, L.; Mégret, P.; Caucheteur, C.; López-Higuera, J. M.

    2016-05-01

    We report a practical study of the thermal decay of cladding mode resonances in tilted fiber Bragg gratings, establishing an analogy with the "power law" evolution previously observed on uniform gratings. We examine how this process contributes to a great thermal stability, even improving it by means of a second cycle slightly increasing the annealing temperature. In addition, we show an improvement of the grating spectrum after annealing, with respect to the one just after inscription, which suggests the application of this method to be employed to improve saturation issues during the photo-inscription process.

  5. A novel optical filter of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    LI; Xiaolu; JIANG; Yuesong

    2006-01-01

    A theory of a novel optical filter of drawing the fiber Bragg grating by the heated elastic sheet is advanced. Based on the heat conduction equation, a set of functions of temperature and thermal expansion on the heated elastic sheet are calculated. And the most displacement of the heated elastic sheet is also described. Finally the expression of the reflected Bragg wavelength deviation in terms of the thermal power density of heat-source is deduced. The physics feasibility of these conclusions mentioned above is proved. It is a potential value for the novel optical filter to research.

  6. Stationary Light Pulses without Bragg Gratings

    CERN Document Server

    Lin, Yen-Wei; Peters, Thorsten; Liao, Wen-Te; Cho, Hung-Wen; Guan, Pei-Chen; Yu, Ite A

    2008-01-01

    The underlying mechanism of the stationary light pulse (SLP) was identified as a band gap being created by a Bragg grating formed by two counter-propagating coupling fields of similar wavelength. Here we present a more general view of the formation of SLPs, namely several balanced four-wave mixing processes sharing the same ground-state coherence. Utilizing this new concept we report the first experimental observation of a bichromatic SLP at wavelengths for which no Bragg grating can be established. We also demonstrate the production of a SLP directly from a propagating light pulse without prior storage. Being easily controlled externally makes SLPs a very versatile tool for low-light-level nonlinear optics and quantum information manipulation.

  7. Fiber Bragg grating based tunable sensitivity goniometer

    Science.gov (United States)

    Padma, Srivani; Umesh, Sharath; Pant, Shweta; Srinivas, Talabattula; Asokan, Sundarrajan

    2016-03-01

    Goniometer has found extensive usage in diverse applications, primary being medical field in which it is employed for obtaining the range of motion of joints during physical therapy. It is imperative to have a dynamic system to measure the range of motion which will aid for a progressive therapeutic treatment. Hence in the present study, a novel goniometer for real time dynamic angle measurement between two surfaces with the aid of a Fiber Bragg Grating sensor is proposed. The angular rotation between the two surfaces will be identified by the two arms of the Fiber Bragg Grating Goniometer (FBGG), which is translated to the rotation of the shaft which holds these arms together. A cantilever beam is fixed onto the base plate whose free end is connected to the rotating shaft. The rotating shaft will actuate a mechanism which will pull the free end of the cantilever resulting in strain variation over the cantilever beam. The strain variation on the cantilever beam is measured by the Fiber Bragg Grating sensor bonded over it. Further, the proposed FBGG facilitates tunable sensitivity by the discs of varying diameters on the rotating shaft. Tunable sensitivity of the FBGG is realised by the movement of these discs by varying circumferential arc lengths for the same angular movement, which will actuate the pull on the cantilever beam. As per the requirement of the application in terms of resolution and range of angular measurement, individual mode of sensitivity may be selected.

  8. Advances in bio-tactile sensors for minimally invasive surgery using the fibre Bragg grating force sensor technique: a survey.

    Science.gov (United States)

    Abushagur, Abdulfatah A G; Arsad, Norhana; Reaz, Mamun Ibne; Bakar, A Ashrif A

    2014-04-09

    The large interest in utilising fibre Bragg grating (FBG) strain sensors for minimally invasive surgery (MIS) applications to replace conventional electrical tactile sensors has grown in the past few years. FBG strain sensors offer the advantages of optical fibre sensors, such as high sensitivity, immunity to electromagnetic noise, electrical passivity and chemical inertness, but are not limited by phase discontinuity or intensity fluctuations. FBG sensors feature a wavelength-encoding sensing signal that enables distributed sensing that utilises fewer connections. In addition, their flexibility and lightness allow easy insertion into needles and catheters, thus enabling localised measurements inside tissues and blood. Two types of FBG tactile sensors have been emphasised in the literature: single-point and array FBG tactile sensors. This paper describes the current design, development and research of the optical fibre tactile techniques that are based on FBGs to enhance the performance of MIS procedures in general. Providing MIS or microsurgery surgeons with accurate and precise measurements and control of the contact forces during tissues manipulation will benefit both surgeons and patients.

  9. Composite cure monitoring with Bragg grating sensors

    Science.gov (United States)

    Slattery, Kerry T.; Corona-Bittick, Kelli; Dorr, Donald J.

    1998-03-01

    Residual stress is induced in fiber composite materials during the cure process because the thermal expansion coefficient of the fiber is generally much lower than that of the polymer matrix. The two materials are 'locked' together at the cure temperature. Then, as they cool, the matrix attempts to contract more than the fiber leading to tension in the matrix and compression in the fiber. This can lead to the formation of microcracks parallel to the fibers in thick composite piles or yarns. The magnitude of residual stress can be reduced by modifying the cure cycle; however, optimizing the cure cycle requires a complete understanding of the state of cure throughout the composite. This is a complex problem -- especially in thick composites. Pilot studies have been performed placing Bragg gratin sensors in glass fabric preforms and monitoring the response of the grating during resin infusion and cure. The typical response shows the initial thermal expansion of the Bragg grating, a rapid contraction of the grating as the resin gels, slower contraction during cure, and thermal contraction at the composite thermal expansion coefficient during cool down. This data is then sued with micromechanical models of the fiber/matrix interaction during cure to establish material parameters for cure simulation. Once verified, these cure simulation methods will be used to optimize tooling design and cure cycles in composite components.

  10. Longitudinal coupling effect in microfiber Bragg gratings

    Science.gov (United States)

    Zhao, Ping; Zhang, Jihua; Wang, Guanghui; Jiang, Meng; Ping Shum, Perry; Zhang, Xinliang

    2012-10-01

    We theoretically present longitudinal coupling effect (LCE) in air-cladding microfiber Bragg gratings (MFBGs). Distinct from conventional weakly-guiding optical fibers, large longitudinal electric field (Ez) exists in wavelength-scale microfibers. Due to LCE, MFBG reflectivity can be reduced by more than 30% within the band-gap and the full width at half maximum (FWHM) is obviously narrowed. This theoretical analytical work is instructive to precisely design and fabricate MFBGs that are promising in the areas of optical sensing and nanophotonics.

  11. Fiber Bragg grating hydrophone with high sensitivity

    Institute of Scientific and Technical Information of China (English)

    Wentao Zhang; Yuliang Liu; Fang Li

    2008-01-01

    A fiber Bragg grating (FBG) hydrophone with high sensitivity was demonstrated. This hydrophone used a rubber diaphragm and a copper hard core as the sensing element. To compensate the hydrostatic pressure,a capillary tube was fixed at the end of the hydrophone. Theoretical analysis of the acoustic pressuresensitivity was given in this letter. Experiments were carried out to test the frequency response of the hydrophone. The result shows that when the Young's modulus of the diaphragm is higher, a flatter frequency response will be obtained.

  12. Modeling Component-based Bragg gratings Application: tunable lasers

    Directory of Open Access Journals (Sweden)

    Hedara Rachida

    2011-09-01

    Full Text Available The principal function of a grating Bragg is filtering, which can be used in optical fibers based component and active or passive semi conductors based component, as well as telecommunication systems. Their ideal use is with lasers with fiber, amplifiers with fiber or Laser diodes. In this work, we are going to show the principal results obtained during the analysis of various types of grating Bragg by the method of the coupled modes. We then present the operation of DBR are tunable. The use of Bragg gratings in a laser provides single-mode sources, agile wavelength. The use of sampled grating increases the tuning range.

  13. The Functionality of Fiber Bragg Grating Sensor Compared to that of Foil Gauge

    Directory of Open Access Journals (Sweden)

    Bashir A. Tahir

    2005-01-01

    Full Text Available Technology such as Fiber Bragg Grating (FBG sensors are widely accepted in almost all industries. FBG are being investigated for their applicability in other markets such as smart structures. Fiber optic sensors can also be used in many different applications. Fiber optic sensors are available in several types; among them, the Bragg grating sensor is being studied in this research. For this research work, the main focus was the use of fiber Bragg grating sensors for measuring strain. The key objective of this research; to determine the functionality of fiber Bragg grating sensors compared to that of conventional foil gauges. Fiber Bragg grating sensors were chosen for this research because they have a high potential for various uses in the monitoring of smart structures. The major incentives for this type of research are the current deterioration of civil structures in west Malaysia. The laboratory tests are being reported in this research work including tests of steel straps and an aluminum test specimen. In all the tests, strain was measured using the fiber Bragg grating sensors and compared to values from a conventional foil gauge. The results are being discussed in details. It was inferred that the use of fiber optic technology for the monitoring of civil structures is very promising and the future is sure to bring further advancements and improvements.

  14. Writing Bragg Gratings in Multicore Fibers.

    Science.gov (United States)

    Lindley, Emma Y; Min, Seong-Sik; Leon-Saval, Sergio G; Cvetojevic, Nick; Lawrence, Jon; Ellis, Simon C; Bland-Hawthorn, Joss

    2016-01-01

    Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong suppression at a single wavelength requires that all cores have matching transmission profiles. These gratings cannot be inscribed using the same method as for single-core fibers because the curved surface of the cladding acts as a lens, focusing the incoming UV laser beam and causing variations in exposure between cores. Therefore we use an additional optical element to ensure that the beam shape does not change while passing through the cross-section of the multicore fiber. This consists of a glass capillary tube which has been polished flat on one side, which is then placed over the section of the fiber to be inscribed. The laser beam enters the fiber through the flat surface of the capillary tube and hence maintains its original dimensions. This paper demonstrates the improvements in core-to-core uniformity for a 7-core fiber using this method. The technique can be generalized to larger multicore fibers. PMID:27167576

  15. Time/Wavelength Fiber Bragg Grating Multiplexing Sensor Array

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A novel time/wavelength-multiplexed fiber Bragg grating sensor array is presented. This type of sensor array has the advantages of more points for multi-point measurement, simple structure and low cost.

  16. Structural Health Monitoring Using Fiber Bragg Grating Sensor Matrix Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Fiber Bragg Grating had been identified as very important elements, especially for strain measurements in smart structures. In many applications, arrays of FBG...

  17. Fibre Bragg Grating Components for Filtering, Switching and Lasing

    OpenAIRE

    Yu, Zhangwei

    2008-01-01

    Fibre Bragg gratings (FBGs) are key components for a vast number of applications in optical communication systems, microwave photonics systems, and optical sensors, etc. The main topic of this thesis is fibre Bragg grating fabrication and applications in direct microwave optical filtering, high speed switching and switchable dual-wavelength fibre lasers. First, a brief overview is given about the photosensitivity in optical fibre, basic FBG fabrication techniques, the popular coupled-mode the...

  18. Research of fiber Bragg grating geophone based on cantilever beam

    Science.gov (United States)

    Wang, Liang; Chen, Shao-hua; Tao, Guo; Lu, Gui-wu; Zhao, Kun

    2009-07-01

    Along with the development of seismic exploration, the demand of frequency, dynamic range, precision and resolution ration is increased. However, the traditional geophone has disadvantages of narrower bandwidth, lower dynamic range and resolution, and cannot meet the new needs of seismic exploration. Geophone technology is a choke point, which constrains the development of petroleum prospecting in recent years. Fiber Bragg Grating seism demodulation technology is the newest kind of seism demodulation technology. The sensing probe of the Fiber Bragg Grating geophone is made up of Fiber Bragg Gating. The information which it collects is embodied by wavelength. The modulation-demodulation is accomplished by Fiber Bragg Gating geophone directly. In this paper, we design different size Fiber Bragg Grating geophones based on the transmission properties of Fiber Bragg Grating and cantilever beam method. Beryllium bronze and stainless steel are chosen as the elastic beam and shell materials, respectively. The parameters such as response function and sensitivity are given theoretically. In addition, we have simulated the transmission characteristics of Fiber Bragg Grating geophone by virtue of finite element analysis. The influences of wavelength, mass block, fiber length on the characteristics of geophones are discussed in detail, and finally the appropriate structural parameters are presented.

  19. Optical fibre Bragg grating recorded in TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, I.P.; Yuan, Scott Wu; Stefani, Alessio;

    2011-01-01

    A report is presented on the inscription of a fibre Bragg grating into a microstructured polymer optical fibre fabricated from TOPAS cyclic olefin copolymer. This material offers two important advantages over poly (methyl methacrylate), which up to now has formed the basis for polymer fibre Bragg...

  20. Thermally tunable integrated planar Bragg-grating stabilized diode laser

    Science.gov (United States)

    Lynch, S. G.; Gates, J. C.; Berry, S. A.; Holmes, C.; Smith, P. G. R.

    2015-03-01

    A pair of external cavity diode lasers are fabricated using an integrated planar Bragg grating. The planar waveguide and Bragg reflector is UV-written within a glass-on-silicon chip. Intensity isolated, continuous wavelength tuning at > 1kHz modulation rate is acheived using micro-heating elements fabricated directly over the Bragg grating. Low RIN (<140dB) and low linewidth (δν ~ 200 kHz) operation is found using a heterodyne measurement. We demonstrate the lasers operating in phase-locked loop configuration where one laser is frequency-offset locked to the other.

  1. Compact Bragg Gratings for Long-Range Surface Plasmon Polaritons

    DEFF Research Database (Denmark)

    Boltasseva, Alexandra; Bozhevolnyi, Sergey I; Nikolajsen, Thomas;

    2006-01-01

    By introducing periodic thickness-modulation of thin metal stripes embedded in a dielectric, we realize compact and efficient Bragg gratings for long-range surface plasmon polaritons (LR-SPPs) operating around 1550 nm. We measure reflection and transmission spectra of the gratings having different...

  2. Birefringent Bragg Gratings in Highly-Nonlinear Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    Kevin Cook; John Canning; John Holdsworth

    2008-01-01

    Efficient writing of Bragg gratings in 12-ring highly-nonlinear photonic crystal fibers is described. Experimental and numerical investigations are performed to reveal the optimum angle for coupling UV writing light to the core. Furthermore, we show that the formation of a strongly briefringent grating is at a particular angle of orientation.

  3. Multipoint sensor based on fiber Bragg gratings

    Energy Technology Data Exchange (ETDEWEB)

    Mendez-Zepeda, O; Munoz-Aguirre, S; Beltran-Perez, G; Castillo-Mixcoatl, J, E-mail: mezeos9@yahoo.com [Facultad de Ciencias FIsico-Matematicas, BUAP Av. San Claudio y Rio Verde, Col. San Manuel, CU. C.P. 72570, Puebla, Puebla (Mexico)

    2011-01-01

    In some control and industrial measurement systems of physical variables (pressure, temperature, flow, etc) it is necessary one system and one sensor to control each process. On the other hand, there are systems such as PLC (Programmable Logic Control), which can process several signals simultaneously. However it is still necessary to use one sensor for each variable. Therefore, in the present work the use of a multipoint sensor to solve such problem has been proposed. The sensor consists of an optical fiber laser with two Fabry-Perot cavities constructed using fiber Bragg gratings (FBG). In the same system is possible to measure changes in two variables by detecting the intermodal separation frequency of each cavity and evaluate their amplitudes. The intermodal separation frequency depends on each cavity length. The sensor signals are monitored through an oscilloscope or a PCI card and after that acquired by PC, where they are analyzed and displayed. Results of the evaluation of the intermodal frequency separation peak amplitude behavior with FBG stretching are presented.

  4. Dynamic fiber Bragg grating sensing method

    Science.gov (United States)

    Ho, Siu Chun Michael; Ren, Liang; Li, Hongnan; Song, Gangbing

    2016-02-01

    The measurement of high frequency vibrations is important in many scientific and engineering problems. This paper presents a novel, cost effective method using fiber optic fiber Bragg gratings (FBGs) for the measurement of high frequency vibrations. The method uses wavelength matched FBG sensors, with the first sensor acting as a transmission filter and the second sensor acting as the sensing portion. Energy fluctuations in the reflection spectrum of the second FBG due to wavelength mismatch between the sensors are captured by a photodiode. An in-depth analysis of the optical circuit is provided to predict the behavior of the method as well as identify ways to optimize the method. Simple demonstrations of the method were performed with the FBG sensing system installed on a piezoelectric transducer and on a wind turbine blade. Vibrations were measured with sampling frequencies up to 1 MHz for demonstrative purposes. The sensing method can be multiplexed for use with multiple sensors, and with care, can be retrofitted to work with FBG sensors already installed on a structure.

  5. Bragg grating chemical sensor with hydrogel as sensitive element

    Institute of Scientific and Technical Information of China (English)

    Xiaomei Liu(刘小梅); Shilie Zheng(郑史烈); Xianmin Zhang(章献民); Jun Cong(丛军); Kangsheng Chen(陈抗生); Jian Xu(徐坚)

    2004-01-01

    A novel fiber Bragg grating (FBG) based chemical sensor using hydrogel, a swellable polymer, as sensitive element is demonstrated. The sensing mechanism relies on the shift of Bragg wavelength due to the stress resulted from volume change of sensitive swellable hydrogel responding to the change of external environment. A polyacrylamide hydrogel fiber grating chemical sensor is made, and the experiments on its sensitivity to the salinity are performed. The sensitivity is low due to the less stress from the shrinking or swelling of hydrogels. Reducing the cross diameter of the grating through etching with hydrofluoric acid can greatly improve the sensitivity of the sensor.

  6. Simulation of Novel Tunable Nonlinear Chirped Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; ZHANG Xiao-guang; YU Li; YANG Bo-jun

    2003-01-01

    A novel tunable chirped fiber Bragg grating technology is proposed and simulated numerically by Matlab. If we adhere a uniform fiber grating with super magnetostrictive film and expose them in a non-uniform magnetic field, the period of the grating can be changed with the strain imposed on it by the magnetostrictive effect .The chirped characteristics can be tuned by changing the magnetic filed which is very flexible in designing.

  7. Simultaneous 2D Strain Sensing Using Polymer Planar Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Manuel Rosenberger

    2015-02-01

    Full Text Available We demonstrate the application of polymer planar Bragg gratings for multi-axial strain sensing and particularly highlight simultaneous 2D strain measurement. A polymer planar Bragg grating (PPBG fabricated with a single writing step in bulk polymethylmethacrylate is used for measuring both tensile and compressive strain at various angles. It is shown that the sensitivity of the PPBG strongly depends on the angle between the optical waveguide into which the grating is inscribed and the direction along which the mechanical load is applied. Additionally, a 2D PPBG fabricated by writing two Bragg gratings angularly displaced from each other into a single polymer platelet is bonded to a stainless steel plate. The two reflected wavelengths exhibit different sensitivities while tested toward tensile and compressive strain. These characteristics make 2D PPBG suitable for measuring multi-axial tensile and compressive strain.

  8. Damage behaviors of fiber Bragg grating sensor in fabrication

    Science.gov (United States)

    Tang, Liqun; Sang, Dengfeng; Chen, Jinming; Yang, Bao; Liu, Yiping

    2008-11-01

    It is has been noted that for fiber Bragg grating sensor (FBGS), the tensile strengths of fiber Bragg grating sensors (FBGSs) were decreased after the gratings were written, which may reduce the sensor's measurement range obviously. In this paper, we focused on the damage behaviours of FBGS after fabrication experimentally. Firstly, the tensile tests were carried to measure the tensile strengths of naked optical fiber, decoated optical fiber and optical fiber with Bragg gratings to learn deduction of the tensile strength of optical fiber in the cases respectively. Further, the microscope photography was used to observe the surfaces of optical fiber with or without exposure of excimer laser. The main conclusion is that the UV pulse is the main contribution to reduce the strength remarkably, and the mechanical decoating method also can induce the surface damage on the optical fiber.

  9. Trends and future of fiber Bragg grating sensing technologies: tailored draw tower gratings (DTGs)

    Science.gov (United States)

    Lindner, E.; Hartung, A.; Hoh, D.; Chojetzki, C.; Schuster, K.; Bierlich, J.; Rothhardt, M.

    2014-05-01

    Today fiber Bragg gratings are commonly used in sensing technology as well as in telecommunications. Numerous requirements must be satisfied for their application as a sensor such as the number of sensors per system, the measurement resolution and repeatability, the sensor reusability as well as the sensor costs. In addition current challenges need to be met in the near future for sensing fibers to keep and extend their marketability such as the suitability for sterilization, hydrogen darkening or the separation of strain and temperature (or pressure and temperature). In this contribution we will give an outlook about trends and future of the fiber Bragg gratings in sensing technologies. Specifically, we will discuss how the use of draw tower grating technology enables the production of tailored Bragg grating sensing fibers, and we will present a method of separating strain and temperature by the use of a single Bragg grating only, avoiding the need for additional sensors to realize the commonly applied temperature compensation.

  10. Fabrication of the Long Bragg Grating by Excimer Laser Micro Machining with High-Precision Positioning XXY Platform

    Directory of Open Access Journals (Sweden)

    Jian-Zhong Wu

    2014-03-01

    Full Text Available With the advancement of technology, the application of fiber Bragg grating is widely used as a Bragg grating sensor. Fiber Bragg grating is fabrication using excimer laser machining with the phase masker. The grating length is decided by the width of laser beam. In this paper, we proposed fabrication of the long Bragg grating by excimer Laser micro machining with a high-precision positioning XXY platform. The high-precision positioning XXY platform plays an important role for long FBG. It needs seriously to combine three short FBGs. Therefore, we can obtain a long FBG with 15mm length. This method can provide a solution to fabricate long FBG by using cheap laser with high-precision positioning XXY platform.

  11. Plasmonic V-groove waveguides with Bragg grating filters via nanoimprint lithography

    DEFF Research Database (Denmark)

    Smith, Cameron L. C.; Desiatov, Boris; Goykmann, Ilya;

    2012-01-01

    We demonstrate spectral filtering with state-of-the-art Bragg gratings in plasmonic V-groove waveguides fabricated by wafer scale processing based on nanoimprint lithography. Transmission spectra of the devices having 16 grating periods exhibit spectral rejection of the channel plasmon polaritons...... with effective refractive index values calculated by finite element simulations in COMSOL. The results represent advancement towards the implementation of plasmonic V-grooves with greater functional complexity and mass-production compatibility....

  12. A plating method for metal coating of fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Yulong Li; Hua Zhang; Yan Feng; Gang Peng

    2009-01-01

    We present a method for metal coating optical fiber and in-fiber Bragg grating. The technology process which is based on electroless plating and electroplating method is described in detail. The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer. Under the optimum conditions, the surfaces of chemical plating and electroplating coatings are all smooth and compact. There is no visible defect found in the cross-section. Using this two-step metallization method, the in-fiber Bragg grating can be well protected and its thermal sensitivity can be enhanced. After the metallization process, the fiber sensor is successfully embedded in the 42CrMo steel by brazing method. Thus a smart metal structure is achieved. The embedding results show that the plating method for metallization protection of in-fiber Bragg grating is effective.

  13. Technical textiles with embedded fibre Bragg grating sensors

    Science.gov (United States)

    Bilro, L.; Cunha, H.; Pinto, J. L.; Nogueira, R. N.

    2009-10-01

    The characterization of fiber Bragg grating (FBG) sensors integrated on 2D and 3D mesh structures is presented. Several materials and configurations were tested, namely cork, foams, PVC, hexagonal 3D. Sensors were embedded between two substrates using textile lamination technique. Every sample was subjected to temperature variations and mechanical deformations. Through Bragg wavelength monitoring, thermal, deformation and pressure performance were evaluated. These results provide significant information to the conception of smart textiles.

  14. Photonic scanning receiver using an electrically tuned fiber Bragg grating.

    Science.gov (United States)

    Rugeland, P; Yu, Z; Sterner, C; Tarasenko, O; Tengstrand, G; Margulis, W

    2009-12-15

    A 5-cm-long electrically tuned fiber Bragg grating is used to filter a microwave signal on an optical carrier at 1.55 mum. A chirped distributed-feedback structure is employed, with a transmission bandwidth of 54 MHz and relative optical carrier rejection of >30 dB for rf frequencies >2 GHz. The rapid monotonic sweep of the Bragg wavelength is translated into a fast-frequency sweep for rf analysis. PMID:20016616

  15. Bragg gratings in index-guiding photonic crystal fibres

    DEFF Research Database (Denmark)

    Riishede, Jesper; Hougaard, Kristian G.; Libori, S.E. Barkou;

    2002-01-01

    A numerical investigation of coupling coefficients of Bragg-gratings in index-guiding photonic crystal fibres is presented. It is shown that index-guiding photonic crystal fibres have larger coupling coefficients for fibres with small core areas than step-index fibres.......A numerical investigation of coupling coefficients of Bragg-gratings in index-guiding photonic crystal fibres is presented. It is shown that index-guiding photonic crystal fibres have larger coupling coefficients for fibres with small core areas than step-index fibres....

  16. Solgel grating waveguides for distributed Bragg reflector lasers.

    Science.gov (United States)

    Fardad, M A; Luo, H; Beregovski, Y; Fallahi, M

    1999-04-01

    Solgel grating waveguides and their application to the fabrication of external-cavity distributed Bragg reflector (DBR) lasers are demonstrated. A new composition of aluminosilicate material is developed for the fabrication of single-mode waveguides and Bragg reflectors. An average loss of <0.2 dB/cm is measured in the single-mode waveguides at 1550 nm. The reflectors show filtering greater than 97% near 1530 nm, with a bandwidth of ~0.6 nm . The Bragg reflectors are used as feedback resonators for DBR lasers. Single-mode lasing with a sidemode suppression of better than 25 dB is demonstrated. PMID:18071539

  17. Moiré Fibre Bragg Grating Written on Strained Fibres

    Institute of Scientific and Technical Information of China (English)

    孙磊; 冯新焕; 刘艳格; 张伟刚; 袁树忠; 开桂云; 董孝义

    2004-01-01

    Moiré fibre Bragg gratings are made in a single mode fibre and a polarization-maintaining fibre respectively, using an excimer KrF laser and a phase mask. Two gratings are written at the same location of the optical fibre. The wavelength spacing can be finely tuned from 0 to 1.86nm by straining the optical fibre during UV illumination.

  18. The Wavelength Shifting and Temperature Athermalization of Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Yu; e; Kong

    2003-01-01

    The wavelength shifting properties and the temperature athermalization technology of fiber Bragg grating (FBG) were studied in this paper, and then two different athermalization methods were introduced. The research shows that FBG with athermalization by applying the substrate with negative coefficient of thermal expansion is effective and can be used in many fields.

  19. High Sensitivity Polymer Optical Fiber-Bragg-Grating-Based Accelerometer

    DEFF Research Database (Denmark)

    Stefani, Alessio; Andresen, Søren; Yuan, Wu;

    2012-01-01

    We report on the fabrication and characterization of the first accelerometer based on a polymer optical fiber Bragg grating (FBG) for operation at both 850 and 1550 nm. The devices have a flat frequency response over a 1-kHz bandwidth and a resonance frequency of about 3 kHz. The response is line...

  20. Monolithic integrated optic fiber Bragg grating sensor interrogator

    Science.gov (United States)

    Mendoza, Edgar A.; Esterkin, Yan; Kempen, Cornelia; Sun, Songjian

    2010-04-01

    Fiber Bragg gratings (FBGs) are a mature sensing technology that has gained rapid acceptance in civil, aerospace, chemical and petrochemical, medicine, aviation and automotive industries. Fiber Bragg grating sensors can be use for a variety of measurements including strain, stress, vibration, acoustics, acceleration, pressure, temperature, moisture, and corrosion distributed at multiple locations within the structure using a single fiber element. The most prominent advantages of FBGs are: small size and light weight, multiple FBG transducers on a single fiber, and immunity to radio frequency interference. A major disadvantage of FBG technology is that conventional state-of-the-art fiber Bragg grating interrogation systems are typically bulky, heavy, and costly bench top instruments that are assembled from off-the-shelf fiber optic and optical components integrated with a signal electronics board into an instrument console. Based on the need for a compact FBG interrogation system, this paper describes recent progress towards the development of a miniature fiber Bragg grating sensor interrogator (FBG-TransceiverTM) system based on multi-channel monolithic integrated optic sensor microchip technology. The integrated optic microchip technology enables the monolithic integration of all of the functionalities, both passive and active, of conventional bench top FBG sensor interrogators systems, packaged in a miniaturized, low power operation, 2-cm x 5-cm small form factor (SFF) package suitable for the long-term structural health monitoring in applications where size, weight, and power are critical for operation.

  1. Optimization of Apodized Chirped Fiber Bragg Grating for Dispersion Compensation

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Multiwavelength chirped fiber Bragg grating (MCFBG) is a more valuable approach to chromatic dispersion compensation. And adjusting the structure of FBG will optimize the performance of dispersion compensator in 8×10Gb/s DWDM network, which is proved by simulating calculation.

  2. Rational solitons in deep nonlinear optical Bragg grating

    NARCIS (Netherlands)

    Alatas, H.; Iskandar, A.A.; Tjia, M.O.; Valkering, T.P.

    2006-01-01

    We have examined the rational solitons in the Generalized Coupled Mode model for a deep nonlinear Bragg grating. These solitons are the degenerate forms of the ordinary solitons and appear at the transition lines in the parameter plane. A simple formulation is presented for the investigation of the

  3. Laser sensor with Bragg gratings of fiber optics to physics parameter measuring

    International Nuclear Information System (INIS)

    We present the operation of a fiber laser sensor made by an Erbium Doped Fiber pumped at 980nm, an 4.23 km passive fiber and two fiber Bragg gratings placed at the ends of the laser cavity. Under normal conditions, the Bragg gratings have different reflection wavelengths and laser emission is not generated. The two Bragg gratings can be placed at the same reflection wavelength when the Bragg grating with the lowest reflective wavelength increases their temperature which can be used as a sensor element. The laser generation thus shows that the Bragg grating is increasing their temperature. We used a Peltier cell for to change gradually the temperature. (Author)

  4. Flexible nanofiber-coupled hybrid plasmonic Bragg grating.

    Science.gov (United States)

    Liu, Sheng; Zhou, Linjie; Xu, Jian; Wang, Xinyi; Chen, Jianping

    2016-05-01

    We report a hybrid plasmonic Bragg grating composed of a nanofiber coupled with orthogonally oriented metal strips. Numerical simulations are performed to study the transmission and reflection spectra of the grating. It shows that the TM polarization has much stronger Bragg reflection due to the excitation of hybrid plasmonic modes. The dependence of reflection peaks on several key device parameters is analyzed. Light propagation simulation further reveals that both fundamental and first-order TM modes are excited upon Bragg reflection, leading to two separate peaks in the spectrum. We implement the prototype device by attaching a nanofiber onto the surface of an array of sub-micrometer-wide metal strips. The main reflection peak is measured to have a 3-dB bandwidth of 15 nm and out-of-band rejection of more than 30 dB. The effects of nanofiber radius, alignment angle and coupling length on the device performance are also experimentally investigated. PMID:27137547

  5. Silicon waveguide polarization rotation Bragg grating with phase shift section and sampled grating scheme

    Science.gov (United States)

    Okayama, Hideaki; Onawa, Yosuke; Shimura, Daisuke; Yaegashi, Hiroki; Sasaki, Hironori

    2016-08-01

    We describe a Bragg grating with a phase shift section and a sampled grating scheme that converts input polarization to orthogonal polarization. A very narrow polarization-independent wavelength peak can be generated by phase shift structures and polarization-independent multiple diffraction peaks by sampled gratings. The characteristics of the device were examined by transfer matrix and finite-difference time-domain methods.

  6. Temperature sensor based on dual fiber Bragg gratings

    OpenAIRE

    Ekestam, Henrik; Larsson, Jim

    2015-01-01

    The objective of the project was to examine if it was possible to develop a low-cost temperature sensor using dual fiber Bragg gratings (FBGs). The intention was to use one FBG as a reference and let the other FBG function as the sensor. The study shows that it is possible to characterize the temperature sensitivity of each FBG and use the reference to sweep over the applicable spectrum to find the Bragg-wavelength of the sensor. This could be done measuring only the total intensity instead o...

  7. Temperature effects in concrete structures measured with fibre Bragg grating

    Science.gov (United States)

    Silva, Jean C.; Martelli, Cicero; Penner, Elisabeth; Kalinowski, Hypolito J.

    2004-06-01

    We analyze the action of fire, causing degradation in a concrete cantilever beam using dynamic testing. The structure is instrumented with two fiber Bragg gratings (FBG) sensors. One of them is used to measure vibration and another one is used to measure temperature inside of the cantilever beam, while the beam is exposed to fire. The temperature in the cantilever beam increased until 150°C and a reduction in the strength of concrete can be observed through the modal analysis. A fiber Bragg grating interrogation system, based on tunable filter method, is used for the static and dynamic measurements during the experiments. That system has low cost and it is easy to assemble and maintain when compared to other available instruments.

  8. Processing of Signals from Fiber Bragg Gratings Using Unbalanced Interferometers

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeff; Floyd, Bertram

    2005-01-01

    Fiber Bragg gratings (FBG) have become preferred sensory structures in fiber optic sensing system. High sensitivity, embedability, and multiplexing capabilities make FBGs superior to other sensor configurations. The main feature of FBGs is that they respond in the wavelength domain with the wavelength of the returned signal as the indicator of the measured parameter. The wavelength is then converted to optical intensity by a photodetector to detect corresponding changes in intensity. This wavelength-to-intensity conversion is a crucial part in any FBG-based sensing system. Among the various types of wavelength-to-intensity converters, unbalanced interferometers are especially attractive because of their small weight and volume, lack of moving parts, easy integration, and good stability. In this paper we investigate the applicability of unbalanced interferometers to analyze signals reflected from Bragg gratings. Analytical and experimental data are presented.

  9. Magneto-Optic Field Coupling in Optical Fiber Bragg Gratings

    Science.gov (United States)

    Carman, Gregory P. (Inventor); Mohanchandra, Panduranga K. (Inventor); Emmons, Michael C. (Inventor); Richards, William Lance (Inventor)

    2016-01-01

    The invention is a magneto-optic coupled magnetic sensor that comprises a standard optical fiber Bragg grating system. The system includes an optical fiber with at least one Bragg grating therein. The optical fiber has at least an inner core and a cladding that surrounds the inner core. The optical fiber is part of an optical system that includes an interrogation device that provides a light wave through the optical fiber and a system to determine the change in the index of refraction of the optical fiber. The cladding of the optical fiber comprises at least a portion of which is made up of ferromagnetic particles so that the ferromagnetic particles are subject to the light wave provided by the interrogation system. When a magnetic field is present, the ferromagnetic particles change the optical properties of the sensor directly.

  10. Planar Bragg Grating Sensors—Fabrication and Applications: A Review

    Directory of Open Access Journals (Sweden)

    I. J. G. Sparrow

    2009-01-01

    Full Text Available We discuss the background and technology of planar Bragg grating sensors, reviewing their development and describing the latest developments. The physical operating principles are discussed, relating device operation to user requirements. Recent performance of such devices includes a planar Bragg grating sensor design which allows refractive index resolution of 1.9×10−6 RIU and temperature resolution of 0.03∘C. This sensor design is incorporated into industrialised applications allowing the sensor to be used for real time sensing in intrinsically safe, high-pressure pipelines, or for insertion probe applications such as fermentation. Initial data demonstrating the ability to identify solvents and monitor long term industrial processes is presented. A brief review of the technology used to fabricate the sensors is given along with examples of the flexibility afforded by the technique.

  11. Temperature Compensation for Double Fiber Bragg Grating Sensors

    Institute of Scientific and Technical Information of China (English)

    WANG Chun-cheng; LIU Jia; ZHENG Jian-bang

    2006-01-01

    A novel double fiber Bragg grating(FBG) strain sensor configuration is presented. Temperature compensation method is based on double FBG moored on a rhombus frame. Through the theoretical analysis,the relation between relative shift of Bragg wavelength and the strain applied on the sensor is obtained,and the analytical expression of strain sensitivity coefficient is also given. The experiment results show that:in the strain range of 0~0.8 mm,the relation between the relative shift of Bragg wavelength and applied strain is linear,and the dispersion of double FBG wavelength at the range of -25 ℃~60 ℃ is 0~0.002 nm. The strain sensitivity of the displacement sensor configuration is 0.171 nm/με,and is nearly twice than that of single FC sensor.

  12. High sensitivity fiber Bragg grating pressure difference sensor

    Institute of Scientific and Technical Information of China (English)

    Haiwei Fu(傅海威); Junmei Fu(傅君眉); Xueguang Qiao(乔学光)

    2004-01-01

    Based on the effect of fiber Bragg grating (FBG) pressure difference sensitivity enhancement by encapsulating the FBG with uniform strength beam and metal bellows, a FBG pressure difference sensor is proposed, and its mechanism is also discussed. The relationship between Bragg wavelength and the pressure difference is derived, and the expression of the pressure difference sensitivity coefficient is also given. It is indicated that there is good linear relation between the Bragg wavelength shift and the pressure difference of the sensor. The theoretical and experimental pressure difference sensitivity coefficients are 38.67 and 37.6 nm/MPa, which are 12890 and 12533 times of that of the bare FBG, respectively. The pressure difference sensitivity and dynamic range can be easily changed by changing the size, Young's modulus, and Poisson's ratio of the beam and the bellows.

  13. Photonic crystal distributed feedback fiber lasers with Bragg gratings

    DEFF Research Database (Denmark)

    Søndergaard, Thomas

    2000-01-01

    Two new types of optical fibers, where air-holes are running down their length, are considered for making fiber lasers with Bragg gratings. The mode areas for pump and signal in these fiber lasers may be either larger or smaller compared to the corresponding mode areas for fiber lasers based on...... standard step index fibers. This makes possible realization of fiber lasers with a low pump threshold (small mode area), and fiber lasers suitable for high-power applications (large mode area)...

  14. DESIGN AND SIMULATION OF FIBER BRAGG GRATING BASED SENSORS

    OpenAIRE

    MOHAMED M. SALEH; RIADH K. A. Al-ANI; ILHAM K. ONEES

    2014-01-01

    In this paper the temperature and strain sensing principle of FBG based sensors are design & simulated by using Optigrating software. Simulation tools provide valuable help in optimizing the design parameters.From the graphical simulations, it can be concluded that there is a linear relationship between the Bragg wavelength shift and the temperature as well as the strain change. Also different values of grating period due to increasing the value of shifted wavelength.

  15. Highly reproducible Bragg grating acousto-ultrasonic contact transducers

    Science.gov (United States)

    Saxena, Indu Fiesler; Guzman, Narciso; Lieberman, Robert A.

    2014-09-01

    Fiber optic acousto-ultrasonic transducers offer numerous applications as embedded sensors for impact and damage detection in industrial and aerospace applications as well as non-destructive evaluation. Superficial contact transducers with a sheet of fiber optic Bragg gratings has been demonstrated for guided wave ultrasound based measurements. It is reported here that this method of measurement provides highly reproducible guided ultrasound data of the test composite component, despite the optical fiber transducers not being permanently embedded in it.

  16. Fiber Bragg Gratings Embedded in 3D-Printed Scaffolds

    CERN Document Server

    Liacouras, Peter; Choudhry, Khazar; Strouse, G F; Ahmed, Zeeshan

    2015-01-01

    In recent years there has been considerable interest in utilizing embedded fiber optic based sensors for fabricating smart materials. One of the primary motivations is to provide real-time information on the structural integrity of the material so as to enable proactive actions that prevent catastrophic failure. In this preliminary study we have examined the impact of embedding on the temperature-dependent response of fiber Bragg gratings.

  17. Trial analysis of swine's periodontal ligament with Bragg grating sensors

    Science.gov (United States)

    Menegotto, G. F.; Grabarski, L.; Kalinowski, H. J.; Simões, J. A.

    2009-10-01

    In this work it is reported the measurement of the differential strain between the dental and bone tissues under effect of an applied load. Slices of swine mandible, containing the premolar tooth, are cut and measured in fresh condition. The strain is measured using fibre Bragg grating sensors glued to both tissues. In the measured range the results show a linear behaviour and confirm the importance of the periodontal ligament in the load transfer mechanism.

  18. A high sensitive fiber Bragg grating cryogenic temperature sensor

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou; Aichun Liu

    2009-01-01

    At cryogenic temperature, a fiber Bragg grating (FBG) temperature sensor with controllable sensitivity and variable measurement range is demonstrated by using bimetal configuration. In experiments, sensitivities of -51.2, -86.4, and -520 pm/K are achieved by varying the lengths of the metals. Measurement ranges of 293 - 290.5, 283 - 280.5, and 259 - 256.5 K are achieved by shortening the distance of the gap among the metals.

  19. Fiber Bragg grating pressure sensor with enhanced sensitivity

    Institute of Scientific and Technical Information of China (English)

    Wentao Zhang; Lihui Liu; Fang Li; Yuliang Liu

    2007-01-01

    @@ A novel fiber Bragg grating (FBG) pressure sensor with the enhanced sensitivity has been demonstrated. A piston-like diaphragm with a hard core in the center is used to enhance the sensitivity. Both the theoretical analysis and the experimental result show that the radius of the hard core has significant effect on the pressure sensitivity. When the radius of the hard core is 1.5 mm, a pressure sensitivity of 7.23 nm/MPa has been achieved.

  20. Fiber Bragg Grating Pressure Sensor Based on Corrugated Diaphragm

    Institute of Scientific and Technical Information of China (English)

    FU Hai-wei; FU Jun-mei; QIAO Xue-guang

    2004-01-01

    A kind of fiber Bragg grating pressure sensor based on corrugated diaphragm is proposed. The relationship between the central wavelength of reflective wave of FBG and pressure is given, and the expression of the pressure sensitivity coefficient is also given. Within the range from results agree with the theoretical analysis. It is indicated that the expected pressure sensitivity of the sensor can be obtained by optimizing the size and mechanical parameters of the corrugated diaphragm.

  1. Embedding silica and polymer fibre Bragg gratings (FBG) in plastic 3D-printed sensing patches

    DEFF Research Database (Denmark)

    Zubel, Michal G.; Sugden, Kate; Webb, David J.;

    2016-01-01

    This paper reports the first demonstration of a silica fibre Bragg grating (SOFBG) embedded in an FDM 3-D printed housing to yield a dual grating temperature-compensated strain sensor. We also report the first ever integration of polymer fibre Bragg grating (POFBG) within a 3-D printed sensing...

  2. Influence of Non-uniform Temperature Field on Spectra of Fibre Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yan; HE Xing-Fang; YUAN Jie; YIN Li-Qun; FANG Xiao-Yong; CAO Mao-Sheng

    2009-01-01

    We simulate the spectrum characteristics of fibre Bragg grating (FBG) with non-uniform temperature using the transmission matrix method, and the results are analysed. It is found that firstly the modulated coefficient of average refractive index is a very important parameter that influences the spectrum characteristic of the fibre Bragg grating, and secondly the spectrum curves are different in different temperature fields at the same parameter. Hence, we can determine the metrical temperature by analysing the spectrum of fibre Bragg grating.

  3. Fabrication of High Quality Broadband Type IIA Chirped Fiber Bragg Gratings

    Institute of Scientific and Technical Information of China (English)

    SANG Xin-zhu; YU Chong-xiu; YAN Bin-bin; MA Jian-xin; LU Nai-guang

    2006-01-01

    Chirped fiber Bragg gratings have found many applications in optical communication and sensing systems. High quality filters based on chirped fiber Bragg gratings with reflection bandwidth of 2.6 and 32nm and high reflectivity are demonstrated experimentally with 2 and 4cm long phase masks, respectively. These filters with flat reflection band and high reflectivity are achieved by writing type IIA chirped Bragg gratings.

  4. Spectral characteristics of draw-tower step-chirped fiber Bragg gratings

    Science.gov (United States)

    Idrisov, Ravil F.; Varzhel, Sergey V.; Kulikov, Andrey V.; Meshkovskiy, Igor K.; Rothhardt, Manfred; Becker, Martin; Schuster, Kay; Bartelt, Hartmut

    2016-06-01

    This paper presents research results on the spectral properties of step-chirped fiber Bragg grating arrays written during the fiber drawing process into a birefringent optical fiber with an elliptical stress cladding. The dependences of resonance shift of the step-chirped fiber Bragg grating on bending, on applied tensile stress and on temperature have been investigated. A usage of such step-chirped fiber Bragg gratings in fiber-optic sensing elements creation has been considered.

  5. Computer-Generated Holograms for Recording Multiple-Phase-Shifte Fiber Bragg Grating Corrugations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new method of fabricating multiple-phase-shifte fiber Bragg grating by CGHs is proposed. The authors present an example of such CGH by which a section multiple-phase-shifte fiber Bragg grating with two π/2 phase shifts and grating length L=21.2 μm was produced. The authors describe the production process and finally give an example of a reconstructed fiber grating with two phase-shifts.

  6. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    OpenAIRE

    B.B.PADHY; HAFTAY ABADI GEBRU; SANDIPAN M.NALAWADE

    2011-01-01

    Linearly Chirped Fiber Bragg Gratings (FBGs) have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effec...

  7. OPTIMIZATION OF INTRAGRATING SENSING USING FIBER BRAGG GRATING

    Directory of Open Access Journals (Sweden)

    B.B.PADHY

    2011-01-01

    Full Text Available Linearly Chirped Fiber Bragg Gratings (FBGs have been optimized and investigated for intragrating sensing. The side lobes have been suppressed using Gaussian apodization while maintaining the peak reflectivity and the bandwidth of the reflected signal. We have achieved a chirp rate of 0.5 to 2 nm/mm for intragrating sensing.Average thermal sensitivity of 11.55 pm/ oC is obtained which is higher than uniform FBGs. We have achieved novel characteristics of linearly chirped FBGs under the effect of non-monotonic physical parameter distribution fields for excellent spectral response profile for intragrating sensing.

  8. On-Chip Silicon Waveguide Bragg Grating Photonic Temperature Sensor

    CERN Document Server

    Klimov, Nikolai N; Berger, Michaela; Ahmed, Zeeshan

    2015-01-01

    Resistance thermometry is a time-tested method for taking temperature measurements. In recent years fundamental limits to resistance-based approaches spurred considerable interest in developing photonic temperature sensors as a viable alternative. In this study we demonstrate that our photonic thermometer, which consists of a silicon waveguide integrated with a Bragg grating, can be used to measure temperature changes over the range from 5 C to 160 C with a combined expanded uncertainty [k = 2 ; 95% confidence level] of 1.25 degree C. The computational modeling of the sensor predicts the resonance wavelength and effective refractive index within 4% of the measured value.

  9. Humidity insensitive TOPAS polymer fiber Bragg grating sensor

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Khan, Lutul; Webb, David J.;

    2011-01-01

    We report the first experimental demonstration of a humidity insensitive polymer optical fiber Bragg grating (FBG), as well as the first FBG recorded in a TOPAS polymer optical fiber in the important low loss 850nm spectral region. For the demonstration we have fabricated FBGs with resonance...... wavelength around 850 nm and 1550 nm in single-mode microstructured polymer optical fibers made of TOPAS and the conventional poly (methyl methacrylate) (PMMA). Characterization of the FBGs shows that the TOPAS FBG is more than 50 times less sensitive to humidity than the conventional PMMA FBG in both...

  10. Microfiber-Based Bragg Gratings for Sensing Applications: A Review

    Directory of Open Access Journals (Sweden)

    Jun-Long Kou

    2012-06-01

    Full Text Available Microfiber-based Bragg gratings (MFBGs are an emerging concept in ultra-small optical fiber sensors. They have attracted great attention among researchers in the fiber sensing area because of their large evanescent field and compactness. In this review, the basic techniques for the fabrication of MFBGs are introduced first. Then, the sensing properties and applications of MFBGs are discussed, including measurement of refractive index (RI, temperature, and strain/force. Finally a summary of selected MFBG sensing elements from previous literature are tabulated.

  11. Structural Health Monitoring of Bridges with Fiber Bragg Grating Sensors

    Directory of Open Access Journals (Sweden)

    Francisco Navarro-Henríquez

    2014-11-01

    Systems with fiber optic sensors FBG (Fiber Bragg Grating are consolidated in the Structural Health Monitoring (SMH of bridges, Nondestructive Testing (NDT static and dynamic measurements of deformation, displacement, deflection, temperature and vibration. This article provides a brief introduction to the technology and the fundamentals of fiber optic sensors, also present comparative advantages over its traditional counterpart is presented. Their characteristics are described and measurement graphics are presented as an application example of the FBG sensors. Finally, some key aspects to consider for proper use in the field are mentioned.

  12. Application of the Transmission Bragg Gratings for Vibration Monitoring

    CERN Document Server

    Tikhonov, E A

    2010-01-01

    It is shown that the optical-electronic system consisted of the transmission Bragg grating, a laser and the intermediate sensitive to the vibrations mirror can detect the vibrations, when touched by them laser beam scan will exceed the angular divergence of the beam. The mathematical model of the sensor of the vibrations presented in the form of Taylor series describes the system response taking into account the operating point, in particular, describes the effect of the doubling of the modulation frequency response relative to the frequency of acting vibrations.

  13. Underwater Acoustic Sensors Based on Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Giuseppe Parente

    2009-06-01

    Full Text Available We report on recent results obtained with a fiber optic hydrophone based on the intensity modulation of the laser light in a FBG (Fiber Bragg Grating under the influence of the sound pressure. In order to control the behavior of the hydrophone in terms of sensitivity and bandwidth, FBGs have been coated with proper materials, characterized by different elastic modulus and shapes. In particular, new experiments have been carried out using a cylindrical geometry with two different coating, showing that the sensitivity is not influenced by the shape but by the transversal dimension and the material characteristics of the coating.

  14. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems.

    Science.gov (United States)

    Ganziy, D; Jespersen, O; Woyessa, G; Rose, B; Bang, O

    2015-06-20

    We propose a novel dynamic gate algorithm (DGA) for precise and accurate peak detection. The algorithm uses a threshold-determined detection window and center of gravity algorithm with bias compensation. We analyze the wavelength fit resolution of the DGA for different values of the signal-to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg gratings. PMID:26193010

  15. Strain measurements on concrete beam and carbon fiber cable with distributed optical fiber Bragg grating sensors

    Science.gov (United States)

    Nellen, Philipp M.; Bronnimann, Rolf; Sennhauser, Urs J.; Askins, Charles G.; Putnam, Martin A.

    1996-09-01

    We report on civil engineering applications of wavelength multiplexed optical fiber Bragg grating arrays directly produced on the draw tower for testing and surveying advanced structures and materials such as carbon fiber reinforced concrete elements and prestressing cables. We equipped a 6 by 0.9 by 0.5 m concrete beam, which was reinforced with carbon fiber reinforced epoxy laminates, and a 7-m long prestressing carbon fiber cable made of seven twisted strands, with optical fiber Bragg grating sensors. Static strains up to 8000 micrometers/m and dynamic strains up to 1200 micrometers/m were measured with a Michelson interferometer used as Fourier spectrometer with a resolution of about 10 micrometers/m for all sensors. Comparative measurements with electrical resistance strain gauges were in good agreement with the fiber optical results. We installed the fiber sensors in two different arrangements: some Bragg grating array elements measured local strain while others were applied in an extensometric configuration to measure moderate strain over a base length of 0.1 to 1 m.

  16. Pure Bending Characteristic of Tilted Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Bo Liu; Yin-Ping Miao; Hai-Bin Zhou; Qi-Da Zhao

    2008-01-01

    a novel structure of the pure macro-bending sensor based on the tilted fiber Bragg grating (TFBG) is proposed. The TFBG located in the half circle with the different diameters is bent at a constant angle with respect to the tilted grating planes. With the variations of the curvature, the core-mode resonance is unchanged and the transmission power of cladding modes detected by the photodiodes varies linearly with curvature, while the ghost mode changes by the form of two-order polynomial. So we can use the transmission power of ghost mode or other cladding modes to detect bending curvature as shape sensor. From a practical point of view, the sensor proposed here is simple, low cost and easy to implement. Moreover, it is possible to make a temperature-insensitive shape sensor due to the same temperature characteristic between the core mode and the cladding modes.

  17. Dynamic strain measurement of hydraulic system pipeline using fibre Bragg grating sensors

    Directory of Open Access Journals (Sweden)

    Qiang Wang

    2016-04-01

    Full Text Available Fatigue failure is a serious problem in hydraulic piping systems installed in the machinery and equipment working in harsh operational conditions. To alleviate this problem, health monitoring of pipes can be conducted by measuring and analysing vibration-induced strain. Fibre Bragg grating is considered as a promising sensing approach for dynamic load monitoring. In this article, dynamic strain measurements based on fibre Bragg grating sensors for small-bore metal pipes have been investigated. The quasi-distributed strain sensing of fibre Bragg grating sensors is introduced. Two comparison experiments were carried out under vibration and impact loads among the methods of electrical strain gauge, piezoelectric accelerometer and fibre Bragg grating sensor. Experimental results indicate that fibre Bragg grating sensor possesses an outstanding ability to resist electromagnetic interference compared with strain gauge. The natural frequency measurement results, captured by fibre Bragg grating sensor, agree well with the modal analysis results obtained from finite element analysis. In addition, the attached fibre Bragg grating sensor brings a smaller impact on the dynamic characteristics of the measured pipe than the accelerometer due to its small size and lightweight. Fibre Bragg grating sensors have great potential for the quasi-distributed measurement of dynamic strain for the dynamic characteristic research and health monitoring of hydraulic system pipeline.

  18. Simultaneous demodulation of polarization mode coupling and fiber Bragg grating within a polarization maintaining fiber

    Science.gov (United States)

    Zhao, Yanshuang; Liu, Yanlei; Zhang, Jianzhong; Yang, Jun; Canning, John; Peng, G. D.; Chen, Yujin; Yuan, Libo

    2015-09-01

    We propose a simultaneous demodulation scheme of polarization mode coupling and fiber Bragg grating in a polarization maintaining fiber based on a white light interferometer. A polarization maintaining fiber with two inscribed fiber Bragg gratings is used to demonstrate the feasibility.

  19. Optical Properties of High Sensitivity Fiber Bragg Grating on Temperature Sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, the spectrum shift properties of the center reflection wavelength detected to be based on the FBG sensor with ambient temperature change. The basic theoretical methods and numerical simulation for the spectral properties of uniform Bragg grating is analyzed by using coupling mode theory which is optical properties of high sensitivity fiber Bragg grating on temperature sensor in accordance with experiment.

  20. Experimental and theoretical analysis of fiber Bragg gratings under Transverse Force to a Small Grating Section

    Institute of Scientific and Technical Information of China (English)

    WU Fei; LI Li-xin; LI Ya-pin; LI Zhi-quan

    2005-01-01

    Fiber Bragg grating under transverse force on a small grating section is studied by numerical simulation and experimentation. A numerical simulation based on the transfer matrix method is used to calculate the consequent changes in reflected spectrum. The reflected spectra of the FBG subjected to the transverse force split into two main peaks, and the split point shifted linearly and periodically versus the applied force. The split point is shifted in the bandwidth with the period of 11N, and the sensitivity of the split point wavelength shift versus the applied force is 0.05 nm/N in one period. The experimental results show good agreement with the simulation analysis.

  1. Grating solitons near the photonic bandgap of a fiber Bragg grating

    Energy Technology Data Exchange (ETDEWEB)

    Senthilnathan, K. [Photonics Research Center and Department of Electronic and Information Engineering, Hong Kong Polytechnic University, Hong Kong (China); Ramesh Babu, P. [Department of Physics, Vellore Institute of Technology, Deemed University, Vellore 632014 (India); Porsezian, K. [Department of Physics, Pondicherry University, Pondicherry 605014 (India)]. E-mail: porsz@hotmail.com; Santhanam, V. [Department of Physics, Presidency College, University of Madras, Chennai 600005 (India); Gnanasekaran, S. [Department of Physics, Anna University, Chennai 600025 (India)

    2007-07-15

    In this paper, we consider the nonlinear pulse propagation through a fiber Bragg grating (FBG) structure wherein the nonlinearity includes both cubic and quintic effects. We study theoretically the formation of bright grating solitons in such a FBG when the carrier frequency of a nonlinear laser pulse is detuned out of the proper edge of the photonic bandgap (PBG). By using multiple scale analysis, we investigate the generation of the bright soliton near the PBG with the higher order linear and nonlinear effects. We also study the impact of quintic nonlinearity on the dispersion curves by deriving the nonlinear dispersion relation from the governing equations.

  2. A Method to Discriminate Strain and Temperature in Fiber Bragg Grating Sensors

    OpenAIRE

    Chalapati, Madhan T; Pattnaik, PK; Selvarajan, A; T. Srinivas

    2005-01-01

    A significant limitation to the applications of fiber Bragg gratings (FBG) sensors is the sensitivity of the Bragg wavelength to both temperature and strain, complicating the independent measurement of these paremeters. In this letter, we explore a new method to discriminate strain and temperature in FBG sensors, which utilises the additioanl wavelength dependent phase introduced by Fiber Bragg grating written on sensing arm of Mach Zehnder Interferometer (MZI). The intensity variations of th...

  3. Fabrication of Dual-Wavelength Fiber Bragg Grating with a Longitudinal Stretch

    Institute of Scientific and Technical Information of China (English)

    JIANG Li; ZHANG Dong-sheng; ZHANG Wei-gang; KAI Gui-yun; DONG Xiao-yi

    2006-01-01

    A method of fabricating dual-wavelength fiber Bragg grating with a uniform phase mask is demonstrated.Theoretical analysis and numerical simulation using Matrix method arc given.The moving exposing technique is adopted.Good control over the grating's reflectivity and the separation of the two Bragg wavelengths is enabled by adjusting the stretch,the length of the grating,and the exposure.A grating with two equal transmission peaks of 19.5 dB is obtained by using this method,and the separation of the two Bragg wavelengths is 0.78 nm.

  4. Resonant THz sensor for paper quality monitoring using THz fiber Bragg gratings

    CERN Document Server

    Yan, Guofeng; Mikulic, Predrag; Bock, Wojtek J; Skorobogatiy, Maksim

    2013-01-01

    We report fabrication of THz fiber Bragg gratings (TFBG) using CO2 laser inscription on subwavelength step-index polymer fibers. A fiber Bragg grating with 48 periods features a ~4 GHz-wide stop band and ~15 dB transmission loss in the middle of a stop band. The potential of such gratings in design of resonant sensor for monitoring of paper quality is demonstrated. Experimental spectral sensitivity of the TFBG-based paper thickness sensor was found to be ~ -0.67 GHz / 10 um. A 3D electromagnetic model of a Bragg grating was used to explain experimental findings.

  5. Analysis of Sampled Fiber Bragg Grating Based on the Photonic Crystal Theory

    Institute of Scientific and Technical Information of China (English)

    ZHU Dan-dan

    2009-01-01

    One of the most basic characteristics of photonic crystal is frequency band gap.When defects are introduced into the periodic photonic crystal,a number of defect modes appear in the stop band.In this paper,we exploit transfer matrix method based on photonic crystal theory,and assume the sampled fiber Bragg grating as one-dimensional dual photonic crystal with a large size defect.Characteristics of the sampled fiber Bragg grating are analyzed.Experimental results show that the sampled fiber Bragg grating has many reflective peaks.Its reflectivity,center wavelength,reflective peak intervals and band width all change with the grating parameters,including grating length,duty ratio of the material with high dielectric constant,and index modulation depth and period.Results agree with the conventional couple mode theory which can be used when analyzing other characteristics of the sampled fiber Bragg grating or applying it into practice.

  6. Karakterisasi Fiber Bragg Grating (FBG) Untuk Pengembangan Sistem Sensor Strain Tanah

    OpenAIRE

    Sinuhaji, Depi Santi

    2010-01-01

    Fiber Bragg Grating (FBG) is a periodic change of refractive index which is the length of optical fiber. Has been developed Fiber Bragg Grating (FBG)-based laser diodes for monitoring landslide-prone areas. This sensor has been developed because high sensitivity and is not affected by electromagnetic induction that can be placed at a distance from the location where the power supply and monitor. FBG transmission peak will shift when the grating is change resulting from a change in temperature...

  7. 100 GHz electrically tunable planar Bragg gratings via liquid crystal overlay

    OpenAIRE

    Adikan, F.R.Mahamd; J.C.Gates; Snow, B.D.; Dyadyusha, A.; Major, H.E.; Gawith, C.B.E.; Kaczmarek, M.; P.G.R.Smith

    2007-01-01

    We demonstrate 114GHz electrically tunable liquid crystal Bragg gratings using 170Vpp voltage. The devices were made using direct UV grating writing and use evanescent coupling into an electrically tuned nematic liquid crystal. Reconfigurable integrated optical devices are essential in today's dense and complex telecommunication meshes. A commonly employed component on the silica platform fulfilling the above role is a planar Bragg grating. The ability to tune the reflection peak of these gra...

  8. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    OpenAIRE

    Hisham K. Hisham

    2016-01-01

    The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r) responses) of uniform polymer optical fiber (POF) Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg) and fiber index modulation (n) have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings sh...

  9. Measuring vibration by using fiber Bragg grating and demodulating it by blazed grating

    Institute of Scientific and Technical Information of China (English)

    Xiaojin Guo(郭晓金); Zongmin Yin(殷宗敏); Ning Song(宋宁)

    2004-01-01

    A method of measuring vibration by using fiber Bragg grating (FBG) and demodulating the spectrum by blazed grating is introduced. The sensor system is made of a simple supported beam with a FBG adhered to its upper surface. A blazed grating is used to demodulate the changing spectrum that is got from the sensor system, and a line charge-coupled device (CCD) is used to accept the diffraction spectrum.Through analyzing the number of the CCD's pixels, we can get the amplitude of vibration and the change of the temperature. The experimental results show that the vibration amplitude of the exciter matches the detected signal under the stable frequency. The temperature shift and vibration signal are also successfully separated.

  10. Detuning in apodized point-by-point fiber Bragg gratings: insights into the grating morphology.

    Science.gov (United States)

    Williams, Robert J; Krämer, Ria G; Nolte, Stefan; Withford, Michael J; Steel, M J

    2013-11-01

    Point-by-point (PbP) inscription of fiber Bragg gratings using femtosecond laser pulses is a versatile technique that is currently experiencing significant research interest for fiber laser and sensing applications. The recent demonstration of apodized gratings using this technique provides a new avenue of investigation into the nature of the refractive index perturbation induced by the PbP modifications, as apodized gratings are sensitive to variation in the average background index along the grating. In this work we compare experimental results for Gaussian- and sinc-apodized PbP gratings to a coupled-mode theory model, demonstrating that the refractive index perturbation induced by the PbP modifications has a negative contribution to the average background index which is small, despite the presence of strong reflective coupling. By employing Fourier analysis to a simplified model of an individual modification, we show that the presence of a densified shell around a central void can produce strong reflective coupling with near-zero change in the average background index. This result has important implications for the experimental implementation of apodized PbP gratings, which are of interest for a range of fiber laser and fiber sensing technologies. PMID:24216907

  11. Palladium coated fibre Bragg grating based hydrogen sensor

    International Nuclear Information System (INIS)

    Detection of steam generator leaks in fast nuclear reactors is carried out by monitoring hydrogen in argon cover-gas. Hydrogen released during sodium cleaning of fast reactor components is required to be monitored. Hydrogen sensors with good sensitivity, stability and response time are required for all the above applications. We report a new type of hydrogen sensor with a Fibre Bragg Grating (FBG) coated with palladium thin film which is used to detect the leak of hydrogen gas in the Steam Generator (SG) module of the Fast Breeder Reactor (FBR). If water leaks into sodium, it results in sodium-water reaction. In this reaction hydrogen and sodium hydroxide are formed. Due to the explosive risk of hydrogen system, hydrogen sensors are of great interest in this case. It is known that hydrogen forms an explosive mixture with air once its concentration exceeds beyond the explosion limit of four percent. The advantages of FBG based hydrogen sensor over the other hydrogen sensors are its inherent property of safety from sparking, immunity to ambient electromagnetic interference. The sensing mechanism in this device is based on mechanical strain that is induced in the palladium coating when it absorbs hydrogen. This process physically stretches the grating and causes the grating period and grating's refractive index, to change. The Bragg wavelength shift is directly proportional to the strain induced and can be directly related to the percentage of hydrogen exposure. The online monitoring of palladium thin film coating on FBG is carried out and recorded the wavelength change and strain induced on the FBG. A hydrogen sensor set up have been fabricated which consists of SS vessel of capacity 10 litres, provided with pressure gauge, Argon filling line with a valve, Hydrogen injection line with flange, a vent line with valve and Hydrogen sensor fixing point. The Palladium coated FBG based Hydrogen sensor is tested in this experimental facility in the exposure of hydrogen in

  12. Wavefront distortion optimized with volume Bragg gratings in photothermorefractive glass.

    Science.gov (United States)

    Gao, Fan; Zhang, Xiang; Sun, Xiaojie; Yuan, Xiao

    2016-03-15

    The wavefront characteristics in 2D angular filtering on the basis of two orthogonal transmitting volume Bragg gratings (VBGs) is presented. The experimental results show that middle-high frequency wavefront distortions are efficiently suppressed with VBGs. The peak-valley value of the beam at a wavelength of 1053 nm reduces from 2.075λ to 0.209λ, and the root mean square value reduces from 0.207λ to 0.041λ. The wavefront power spectrum density shows that the wavefront distribution of the beam in medium and high frequencies is corrected by the VBGs. Additionally, the far-field distribution and focusing properties of the beam are improved. The beam Strehl ratio increases from 0.43 to 0.96, and the encircled energy improves from 95% energy at 4.01 mrad to 95% energy at 1.26 mrad. PMID:26977639

  13. Fiber Bragg grating demodulation through innovative numerical procedures

    Science.gov (United States)

    Dinardo, Giuseppe; Vacca, Gaetano

    2016-01-01

    The aim of this article is to introduce an innovative algorithm for the calculation of the shift of the maximum reflectivity wavelength of a Fiber Bragg Grating experiencing an applied strain. An accurate and precise evaluation of the FBG spectrum displacement is crucial for determining the amount of the physical quantity inducing such perturbations. The proposed method is based on the Fast Fourier Transform based Cross Correlation function. Such method is compared to Least Squares Fitting (LSF) and the centroid algorithms, pointing out remarkable improvements in accuracy, precision, and time consumption performance. In addition, a further improvement of the proposed algorithm is introduced. It consists in an iteratively performed Cross Correlation algorithm. It has been proved that such improvement leads to estimations characterized by better accuracy and precision, thanks also to a considerable reduction of the peak-locking effect due to the FBG spectral resolution.

  14. A fast response temperature sensor based on fiber Bragg grating

    International Nuclear Information System (INIS)

    Aimed at the requirement for a fast-response expendable ocean temperature sensor, this paper presents a new design scheme for an optic fiber sensor. Ocean temperature sensors require high sensitivity and high response speed, which must be up to milliseconds. The fiber Bragg grating (FBG) temperature sensor with high sensitivity has been declared in the last decade, but its response speed has been rarely reported. In this paper, a method is proposed which is to package an FBG with a metal tube. The response time of this sensor is 48.6 ms, which is an order of magnitude greater than that of an ordinary optical fiber temperature sensor. Temperature sensitivity is 27.6 pm/°C and the linearity is up to 0.9999. In addition, the sensor can be less than 15 mm. It offers a new way to detect ocean temperature. (paper)

  15. Open pit slope deformation monitoring by fiber Bragg grating sensors

    Science.gov (United States)

    Xu, Guoquan; Xiong, Daiyu; Duan, Yun; Cao, Xiaoshuang

    2015-01-01

    With microstrain resolution and the capability to sample at rates of 2000 Hz or higher, fiber Bragg grating (FBG) strain sensor offers exciting new possibilities for in situ deformation monitoring induced by blasting load in an open pit slope. Here, we are developing a new technology for measuring deformation in real time on the microstrain in an open pit slope during the blasting. A fiber optically instrumented rock mass strain sensor measured strain at 100-cm intervals along a two anchor rock bolt grouted in the slope intact rock mass. In field testing, a number of transient signals have been observed, which in some cases were large enough to trigger rapid sampling. The combination of short- and long-term observation offers new insight into the slope stability and blasting cumulative effects. Therefore, FBG sensors are a useful tool for measuring in situ strain in intact rock masses.

  16. A Magnetostrictive Composite-Fiber Bragg Grating Sensor

    Science.gov (United States)

    Quintero, Sully M. M.; Braga, Arthur M. B.; Weber, Hans I.; Bruno, Antonio C.; Araújo, Jefferson F. D. F.

    2010-01-01

    This paper presents a light and compact optical fiber Bragg Grating sensor for DC and AC magnetic field measurements. The fiber is coated by a thick layer of a magnetostrictive composite consisting of particles of Terfenol-D dispersed in a polymeric matrix. Among the different compositions for the coating that were tested, the best magnetostrictive response was obtained using an epoxy resin as binder and a 30% volume fraction of Terfenol-D particles with sizes ranging from 212 to 300 μm. The effect of a compressive preload in the sensor was also investigated. The achieved resolution was 0.4 mT without a preload or 0.3 mT with a compressive pre-stress of 8.6 MPa. The sensor was tested at magnetic fields of up to 750 mT under static conditions. Dynamic measurements were conducted with a magnetic unbalanced four-pole rotor. PMID:22163644

  17. A Magnetostrictive Composite-Fiber Bragg Grating Sensor

    Directory of Open Access Journals (Sweden)

    Jefferson F. D. F. Araújo

    2010-08-01

    Full Text Available This paper presents a light and compact optical fiber Bragg Grating sensor for DC and AC magnetic field measurements. The fiber is coated by a thick layer of a magnetostrictive composite consisting of particles of Terfenol-D dispersed in a polymeric matrix. Among the different compositions for the coating that were tested, the best magnetostrictive response was obtained using an epoxy resin as binder and a 30% volume fraction of Terfenol-D particles with sizes ranging from 212 to 300 µm. The effect of a compressive preload in the sensor was also investigated. The achieved resolution was 0.4 mT without a preload or 0.3 mT with a compressive pre-stress of 8.6 MPa. The sensor was tested at magnetic fields of up to 750 mT under static conditions. Dynamic measurements were conducted with a magnetic unbalanced four-pole rotor

  18. Dynamic and static strain gauge using superimposed fiber Bragg gratings

    International Nuclear Information System (INIS)

    This paper demonstrates a simple and fast interrogation method for the dynamic and/or static strain gauge using a reflection spectrum from two superimposed fiber Bragg gratings (FBGs). The superimposed FBGs are designed to decrease nonequidistant space of generated a sensing pulse train in a time domain during dynamic strain gauge. By combining centroid finding with smooth filtering methods, both the interrogation speed and accuracy are improved. A four times increase in the interrogation speed of dynamic strain, by generating a 2 kHz optical sensing pulse train from a 500 Hz scanning frequency, is demonstrated experimentally. The interrogation uncertainty and total harmonic distortion characterization of superimposed FBGs are tested and less than 4 pm standard deviation is obtained. (paper)

  19. Femtosecond soliton diode on heterojunction Bragg-grating structure

    CERN Document Server

    Deng, Zhigui; Li, Hongji; Fu, Shenhe; Liu, Yikun; Xiang, Ying; Li, Yongyao

    2016-01-01

    We numerically propose a scheme for realizing an all-optical femtosecond soliton diode based on a tailored heterojunction Bragg grating, which is designed by two spatially asymmetric chirped cholesteric liquid crystals. Our simulations demonstrate that with the consideration of optical nonlinearity, not only the femtosecond diode effect with nonreciprocal transmission ratio up to 120 can be achieved, but also the optical pulse evolving into soliton which maintains its shape during propagation through the sample is observed. Further, the influence of pulse width and the carrier wavelength to the femtosecond diode effect is also discussed in detail. Our demonstrations might suggest a new direction for experimentally realizing the femtosecond soliton diode based on the cholesteric liquid crystals.

  20. Remote (250 km Fiber Bragg Grating Multiplexing System

    Directory of Open Access Journals (Sweden)

    Manuel Lopez-Amo

    2011-09-01

    Full Text Available We propose and demonstrate two ultra-long range fiber Bragg grating (FBG sensor interrogation systems. In the first approach four FBGs are located 200 km from the monitoring station and a signal to noise ratio of 20 dB is obtained. The second improved version is able to detect the four multiplexed FBGs placed 250 km away, offering a signal to noise ratio of 6–8 dB. Consequently, this last system represents the longest range FBG sensor system reported so far that includes fiber sensor multiplexing capability. Both simple systems are based on a wavelength swept laser to scan the reflection spectra of the FBGs, and they are composed by two identical-lengths optical paths: the first one intended to launch the amplified laser signal by means of Raman amplification and the other one is employed to guide the reflection signal to the reception system.

  1. Fiber Bragg grating (FBG) sensors used in coal mines

    Science.gov (United States)

    Wang, Jinyu; Liu, Tongyu; Song, Guangdong; Xie, Hongjing; Li, Lianqing; Deng, Xiaolin; Gong, Zhijie

    2014-06-01

    The fiber Bragg grating (FBG) strain sensors were used for on-line monitoring of the stress variation of the lined wall in the gateway retained along the goaf of No. 3203 coal mining face in Dongtan Mine. The results showed that the FBG strain sensor with the wide measuring range could measure the stress variation accurately during the support process of the gateway retained along the goaf and could provide the basis to further optimize the support structure and to determine the support plan of the gateway retained along the goaf. The FBG micro-seismic sensors were used in Xinglong Mine to detect the micro-seismic signal. The signals were well received and analyzed to determine the location and energy level of the source of the micro-seismic event warning. The FBG sensors and detecting system show a significant potential for micro-seismic detection and geological disasters detection.

  2. Direct UV-written planar Bragg grating sensors

    International Nuclear Information System (INIS)

    Integrated photonics is a proven platform for physical and chemical sensing. It offers miniaturised solutions that are suited for use in extreme environments, including strong EM-fields, EM-pulses and contact with flammable materials, often far exceeding electronic sensors in this regard. This review looks into direct UV-written planar Bragg grating technology and its application to integrated photonic sensors. The platform has been demonstrated widely for measurement of physical properties such as temperature, pressure and strain. In addition, by using an evanescent interaction, refractive index can be measured allowing for chemical and biochemical detection. Further to this, the platform has recently been utilised in quantum information processing, where quantum gate operations and single photon detection has been shown. (topical review)

  3. Miniature fiber Bragg grating sensor interrogator (FBG-Transceiver) system

    Science.gov (United States)

    Mendoza, Edgar A.; Kempen, Cornelia; Lopatin, Craig

    2007-04-01

    This paper describes recent progress conducted towards the development of a miniature fiber Bragg grating sensor interrogator (FBG-Transceiver TM) system based on multi-channel integrated optic sensor (InOSense TM) microchip technology. The hybrid InOSense TM microchip technology enables the integration of all of the functionalities, both passive and active, of conventional bench top FBG sensor interrogator systems, packaged in a miniaturized, low power operation, 2-cm x 5-cm package suitable for the long-term structural health monitoring in applications where size, weight, and power are critical for operation. The FBG-Transceiver system uses active optoelectronic components monolithically integrated to the InOSense TM microchip, a microprocessor controlled signal processing electronics board capable of processing the FBG sensors signals related to stress-strain and temperature as well as vibration and acoustics. The FBG-Transceiver TM system represents a new, reliable, highly robust technology that can be used to accurately monitor the status of an array of distributed fiber optic Bragg grating sensors installed in critical infrastructures. Its miniature package, low power operation, and state-of-the-art data communications architecture, all at a very affordable price makes it a very attractive solution for a large number of SHM/NDI applications in aerospace, naval and maritime industry, civil structures like bridges, buildings and dams, the oil and chemical industry, and for homeland security applications. The miniature, cost-efficient FBG-Transceiver TM system is poised to revolutionize the field of structural health monitoring and nondestructive inspection market. The sponsor of this program is NAVAIR under a DOD SBIR contract.

  4. Compressive and tensile strain sensing using a polymer planar Bragg grating.

    Science.gov (United States)

    Rosenberger, M; Hessler, S; Belle, S; Schmauss, B; Hellmann, R

    2014-03-10

    A polymer planar Bragg grating sensor is used for measuring both mechanical compressive and tensile strain. The planar waveguide with integrated Bragg grating is fabricated in bulk Polymethylmethacrylate in a single writing step using combined amplitude and phase mask technique. After butt coupling of a single-mode optical fiber the planar structure can be applied for measuring both mechanical tensile and compressive strain alongside the integrated waveguide without the need of further modifications. In this respect, we particularly report for the first time compressive strain measurements using a polymer Bragg grating. Furthermore, the sensitivity of the sensor against tensile and compressive strain, its reproducibility and hysteresis are investigated and discussed.

  5. Muscular condition monitoring system using fiber bragg grating sensors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Heon Young; Lee, Jin Hyuk; Kim, Dae Hyun [Seoul National University of Technology, Seoul (Korea, Republic of)

    2014-10-15

    Fiber optic sensors (FOS) have advantages such as electromagnetic interference (EMI) immunity, corrosion resistance and multiplexing capability. For these reasons, they are widely used in various condition monitoring systems (CMS). This study investigated a muscular condition monitoring system using fiber optic sensors (FOS). Generally, sensors for monitoring the condition of the human body are based on electro-magnetic devices. However, such an electrical system has several weaknesses, including the potential for electro-magnetic interference and distortion. Fiber Bragg grating (FBG) sensors overcome these weaknesses, along with simplifying the devices and increasing user convenience. To measure the level of muscle contraction and relaxation, which indicates the muscle condition, a belt-shaped FBG sensor module that makes it possible to monitor the movement of muscles in the radial and circumferential directions was fabricated in this study. In addition, a uniaxial tensile test was carried out in order to evaluate the applicability of this FBG sensor module. Based on the experimental results, a relationship was observed between the tensile stress and Bragg wavelength of the FBG sensors, which revealed the possibility of fabricating a muscular condition monitoring system based on FBG sensors.

  6. High-sensitivity temperature sensor based on Bragg grating in BDK-doped photosensitive polymer optical fiber

    Institute of Scientific and Technical Information of China (English)

    Xusheng Cheng; Weiwei Qiu; Wenxuan Wu; Yanhua Luo; Xiujie Tian; Qijin Zhang; Bing Zhu

    2011-01-01

    @@ A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.%A single-mode polymer optical fiber (POF) with highly photosensitive core doped with benzil dimethyl ketal (BDK) is fabricated and used for writing Bragg grating through the two-beam interference method. The Bragg wavelength of the grating is about 1570 nm, while the full-width at half-maximum (FWHM) of the reflection peak is 0.3 nm. The temperature response of POF Bragg grating is theoretically analyzed and experimentally measured in contrast to silica optical fiber Bragg grating (FBG). The result shows that the temperature character of POF Bragg grating is negative, which is opposite to the silica optical FBG. The absolute value of the temperature response of POF Bragg grating is one order of magnitude higher than that of the silica optical FBG, making POF Bragg grating appear to be very attractive for constructing temperature sensors with high resolution.

  7. Composite scarf repair monitoring using fiber Bragg grating sensors

    Science.gov (United States)

    Li, Henry C. H.; Herszberg, Israel; Davis, Claire E.; Stoddart, Paul R.

    2007-04-01

    Structural health monitoring (SHM) technology may be applied to composite bonded repairs to enable the continuous through-life assessment of the repair efficacy. This paper describes an SHM technique for the detection of debonding in composite scarf repairs using fibre optic Bragg grating strain sensors. A typical composite sandwich structure with a scarf repair on one surface is examined in this paper. A finite element study was conducted which showed that the strain in the debonded region changed significantly compared to the undamaged state. A differential strain approach was used to facilitate the detection of debonds, where two sensors were strategically positioned so that their strain differential increased as the damage propagated. With the use of matching gratings, this technique greatly reduced the support equipment requirement by converting the spectral information into an intensity-modulated signal, thus allowing a compact photodetector to be used for sensor interrogation. An experimental investigation was conducted to validate the theoretically predicted results. The experimental measurements agreed well with the numerical findings qualitatively, indicating that the proposed scheme has great potential as a simple and effective monitoring technique for composite scarf repairs.

  8. A Distributed Fibre Bragg Grating Sensor Interrogator Employing a Reformative Arrayed Waveguide Grating

    Institute of Scientific and Technical Information of China (English)

    HUANG Jing-Tang; HUANG Xu-Guang; ZHAO Hua-Wei

    2008-01-01

    @@ We present an interrogating technique employing a reformative arrayed waveguide grating without output waveguides in combination with a linear charge coupled device. A simple and effective data processing method called area equalized point is used to improve the system resolution. The simulation results show that the wavelength shift of a fibre Bragg grating with temperature can be precisely measured by this interrogation technique. The temperature accuracy and wavelength resolution of the sensor system are smaller than 0.08℃ and 0.8 pm, respectively. If the FBG 3dB-bandwidth is 0.2nm with the wavelength spacing between two adjacent FBGs of 1.4 nm, the temperature and wavelength errors caused by croestalk are respectively 0.01℃ and 0. 1 pm.

  9. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    Science.gov (United States)

    Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abdelalim, A. A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-07-01

    A novel approach which uses Fiber Bragg Grating (FBG) sensors has been utilized to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  10. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    CERN Document Server

    Abbaneo, D; Abbrescia, M.; Abdelalim, A.A.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Ahmed, W.; Aleksandrov, A.; Aly, R.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F.R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M.M.; De Lentdecker, G.; De Oliveira, R.; De Robertis, G.; Dildick, S.; Dorney, B.; Elmetenawee, W.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R.M.; Hassan, A.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y.G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P.K.; Mandal, K.; Marchioro, A.; Marinov, A.; Masod, R.; Majumdar, N.; Merlin, J.A.; Mitselmakher, G.; Mohanty, A.K.; Mohamed, S.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L.M.; Paolucci, P.; Park, I.; Passeggio, G.; Passamonti, L.; Pavlov, B.; Philipps, B.; Piccolo, D.; Pierluigi, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Russo, A.; Ryu, G.; Ryu, M.S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A.H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S.K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

    2016-01-01

    A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented.

  11. Impact of Saturable Gain/Loss on Bistability of Nonlinear Parity-Time Bragg Gratings

    CERN Document Server

    Phang, Sendy; Susanto, Hadi; Benson, Trevor M; Sewell, Phillip

    2014-01-01

    We report on the impact of realistic gain and loss models on the bistable operation of nonlinear parity-time Bragg gratings. In our model we include both dispersive and saturable gain and show that levels of gain/loss saturation can have significant impact on the bistable operation of a nonlinear PT Bragg grating based on GaAs material. The hysteresis of the nonlinear PT Bragg grating is analyzed for different levels of gain and loss and different saturation levels. We show that high saturation levels can improve the nonlinear operation by reducing the intensity at which the bistability occurs. However when the saturation intensity is low, saturation inhibits PT phenomena in a nonlinear PT Bragg grating.

  12. Fiber sensing system based on a bragg grating and optical time domain reflectometry

    OpenAIRE

    Chin, Sanghoon; Thévenaz, Luc

    2013-01-01

    Optic fiber sensor characterized in that the sensing fiber is provided with a continuous Bragg grating covering the entire fiber length which is dedicated to sensing and along which spatially resolved measurements are performed.

  13. High-speed two-dimensional laser scanner based on Bragg gratings stored in photothermorefractive glass.

    Science.gov (United States)

    Yaqoob, Zahid; Arain, Muzammil A; Riza, Nabeel A

    2003-09-10

    A high-speed free-space wavelength-multiplexed optical scanner with high-speed wavelength selection coupled with narrowband volume Bragg gratings stored in photothermorefractive (PTR) glass is reported. The proposed scanner with no moving parts has a modular design with a wide angular scan range, accurate beam pointing, low scanner insertion loss, and two-dimensional beam scan capabilities. We present a complete analysis and design procedure for storing multiple tilted Bragg-grating structures in a single PTR glass volume (for normal incidence) in an optimal fashion. Because the scanner design is modular, many PTR glass volumes (each having multiple tilted Bragg-grating structures) can be stacked together, providing an efficient throughput with operations in both the visible and the infrared (IR) regions. A proof-of-concept experimental study is conducted with four Bragg gratings in independent PTR glass plates, and both visible and IR region scanner operations are demonstrated.

  14. High-speed two-dimensional laser scanner based on Bragg gratings stored in photothermorefractive glass.

    Science.gov (United States)

    Yaqoob, Zahid; Arain, Muzammil A; Riza, Nabeel A

    2003-09-10

    A high-speed free-space wavelength-multiplexed optical scanner with high-speed wavelength selection coupled with narrowband volume Bragg gratings stored in photothermorefractive (PTR) glass is reported. The proposed scanner with no moving parts has a modular design with a wide angular scan range, accurate beam pointing, low scanner insertion loss, and two-dimensional beam scan capabilities. We present a complete analysis and design procedure for storing multiple tilted Bragg-grating structures in a single PTR glass volume (for normal incidence) in an optimal fashion. Because the scanner design is modular, many PTR glass volumes (each having multiple tilted Bragg-grating structures) can be stacked together, providing an efficient throughput with operations in both the visible and the infrared (IR) regions. A proof-of-concept experimental study is conducted with four Bragg gratings in independent PTR glass plates, and both visible and IR region scanner operations are demonstrated. PMID:14503693

  15. Effects of the Facet Reflectivity of a Laser Diode on Fiber Bragg Grating Semiconductor Lasers

    Institute of Scientific and Technical Information of China (English)

    Honggang; Yu; Chang-Qing; Xu; Na; Li; Zhilin; Peng; Jacek; Wojcik; Peter; Mascher

    2003-01-01

    Effects of facet reflectivity of a laser diode on the performance of fiber Bragg grating semiconductor lasers are studied experimentally. Facet reflectivity of less than 10-4 is necessary to obtain stable oscillation wavelength.

  16. Wavelength interrogation of fiber Bragg grating sensors using tapered hollow Bragg waveguides.

    Science.gov (United States)

    Potts, C; Allen, T W; Azar, A; Melnyk, A; Dennison, C R; DeCorby, R G

    2014-10-15

    We describe an integrated system for wavelength interrogation, which uses tapered hollow Bragg waveguides coupled to an image sensor. Spectral shifts are extracted from the wavelength dependence of the light radiated at mode cutoff. Wavelength shifts as small as ~10  pm were resolved by employing a simple peak detection algorithm. Si/SiO₂-based cladding mirrors enable a potential operational range of several hundred nanometers in the 1550 nm wavelength region for a taper length of ~1  mm. Interrogation of a strain-tuned grating was accomplished using a broadband amplified spontaneous emission (ASE) source, and potential for single-chip interrogation of multiplexed sensor arrays is demonstrated. PMID:25361125

  17. An experimental approach to quantify strain transfer efficiency of fibre bragg grating sensors to host structures

    OpenAIRE

    C. Y. Wei; Ye, Chen-Chun; James, Stephen W.; Tatam, Ralph P.; Irving, Phil E.

    2001-01-01

    This paper developed a method to evaluate the strain transfer efficiency of fibre Bragg grating sensors to host structures. Various coatings were applied to fibre Bragg grating sensors after being fabricated. They were epoxy, silane agent and polypropylene, representing different surface properties. A neat epoxy resin plate was used as the host in which the coated fibre sensors were embedded in the central layer. The tensile strain output from the FBGs was compared with that...

  18. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    Directory of Open Access Journals (Sweden)

    Abdallah Ikhlef

    2012-01-01

    Full Text Available This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on solving coupled mode equations by transfer matrix method.

  19. Strain and temperature sensors using multimode optical fiber Bragg gratings and correlation signal processing

    OpenAIRE

    Lim, J; Yang, QP; Jones, BE; Jackson, PR

    2002-01-01

    Multimode fiber optic Bragg grating sensors for strain and temperature measurements using correlation signal processing methods have been developed. Two multimode Bragg grating sensors were fabricated in 62/125 m graded-index silica multimode fiber; the first sensor was produced by the holographic method and the second sensor by the phase mask technique. The sensors have signal reflectivity of approximately 35% at peak wavelengths of 835 nm and 859 nm, respectively. Strain testing...

  20. Uniform Fiber Bragg Grating modeling and simulation used matrix transfer method

    OpenAIRE

    Abdallah Ikhlef; Rachida Hedara; Mohamed Chikh-Bled

    2012-01-01

    This paper presents the modeling and simulation of an optical fiber Bragg grating for maximum reflectivity, minimum side lobe. Gating length represents as one of the critical parameters in contributing to a high performance fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths .The side lobes have been suppressed using raised cosine apodization while maintaining the peak reflectivity. Such simulations are based on ...

  1. Structural Health Monitoring of a Tall Building during Construction with Fiber Bragg Grating Sensors

    OpenAIRE

    Li, D. S.; Ren, L.; Li, H. N.; Song, G. B.

    2012-01-01

    Fiber Bragg grating sensors demonstrate a great potential as a structural health monitoring tool for civil structures to ensure structural integrity, durability, and reliability. The advantages of applying fiber optic sensors to a tall building include their immunity to electromagnetic interference and their multiplexing ability to transfer optical signals over a long distance. In the work, fiber Bragg grating sensors, consisting of strain and temperature sensors, are applied to structural mo...

  2. Fiber-optical accelerometers based on polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole;

    2010-01-01

    Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer.......Fiber-optical accelerometers based on polymer optical fiber Bragg gratings (FBGs) are reported. We have written 3mm FBGs for 1550nm operation, characterized their temperature and strain response, and tested their performance in a prototype accelerometer....

  3. Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Hisham K. Hisham

    2016-06-01

    Full Text Available The thermal dependence of the spectral response (i.e. transmission, reflection and time delay (r responses of uniform polymer optical fiber (POF Bragg gratings has been investigated. In addition to the temperature dependence, the effects of grating strength (kLg and fiber index modulation (n have been investigated. Besides high capability of tunable wavelength due to the unique large and negative thermo-optic coefficient of POF, the spectral response for POF Bragg gratings show high stability and larger spectrum bandwidth with temperature variation compare with the silica optical fiber (SOF Bragg gratings, especially with the increase of the kLg value. It was found that by increasing kLg, the peak reflectance value increases and the bandwidth of the Bragg reflector become narrower. Also it’s shown by increasing the kLg value, r deceasing significantly and reach its minimum value at the designed wavelength (B. Furthermore, the r for POF Bragg gratings is less than that for SOF Bragg gratings at the same value of kLg. Also it’s found that the peak reflectivity value increases to around 60% when the n value increases from 110-4 to 510-4.

  4. Response of some pi-phase-shifted Bragg gratings to elevated pressure

    Science.gov (United States)

    Bal, Harpreet K.; Dragomir, Nicoleta M.; Sidiroglou, Fotios; Wade, Scott A.; Baxter, Greg W.; Collins, Stephen F.

    2011-05-01

    The effect of pressures up to 200 kPa on pi-phase-shifted Bragg gratings was investigated in several types of fibers placed in a pressure chamber. Standard and alternative types of pi-phase shifted gratings were studied, and changes in reflection spectra caused by pressure changes were monitored. The alternative pi-phase shifted grating was fabricated using a phase mask with 536-nm pitch exhibiting features at twice the Bragg wavelength near 1552 nm due to the interleaved refractive index modulations along the fiber core with the periodicity of the phase mask. The three gratings studied exhibited quite different variation in Bragg wavelength with increased pressure for the different fiber types, and the alternative pi-phase-shifted grating in Corning HI 1060 FLEX fiber also suffered a significant change in the shape of the peaks.

  5. Study on rock deformation monitoring using fiber Bragg grating in simulation experiment

    Institute of Scientific and Technical Information of China (English)

    CHAI Jing; WEI Shi-ming; LIU Jin-xuan

    2006-01-01

    Presented the fiber Bragg grating (FBG) sensors for rock strain monitoring in the 1.2 m long plane stress model of the simulation experiment. In the past, for the lack of appropriate technique to measure the deformation of rock structures, the measurement of deflection was restricted to just a few discrete points along rock, and the measuring points were limited to the location-installed with displacement transducers. We developed a method to monitor the deformation of rock structures using fiber optical Bragg grating strain sensors. The sensors were embedded in rock layers of simulation experiment before the materials were put in. These sensors were then used to monitor the experienced strain with different face advancing distance. The test results indicate that, if properly installed FBG sensors can survive under severe conditions associated with embedment process and yield accurate measurements of strains response. At the same time, we make comparisons of the data obtained by FBG sensors with those by centesimal gauge.The interest in FBG sensors was motivated by the potential advantages that they can offer more than existing sensing technologies.

  6. Intensity Modulation of Hybrid Soliton Pulsed Source with Fibre Bragg Grating External Cavity

    Institute of Scientific and Technical Information of China (English)

    Nuran Dogru; M.Sadettin Ozyazici

    2004-01-01

    Resonance peak spectral splitting (RPSS) in the intensity modulation of a hybrid soliton pulsed source, where fibre Bragg gratings are used as an external cavity, can be suppressed by introducing a suitable linear chirp rate in a Gaussian apodized grating. Antireflection-coated reflectivity and gain suppression factor does not strongly affect the RPSS.

  7. Bragg Gratings in Crystalline Waveguides Fabricated by Focused Ion Beam Milling

    NARCIS (Netherlands)

    Inurrategi, I.; Ay, F.; Geskus, D.; Aravazhi, S.; Gadgil, V.J.; Wörhoff, K.; Pollnau, M.

    2010-01-01

    Results of an optimization study of deeply-etched Bragg gratings in KY(WO4)2:Yb3+ to obtain photonic cavity structures are reported. By optimizing parameters such as dose per area, dwell time and pixel resolution the redeposition effects are minimized and 4.3um-deep gratings are achieved.

  8. Coherent propagation of a short polarised radiation pulse in a one-dimensional resonance Bragg grating

    NARCIS (Netherlands)

    Maimistov, A. I.; Polikarpov, V. V.

    2006-01-01

    The propagation of an optical ultrashort pulse in a resonance Bragg grating is considered taking into account the polarisation of electromagnetic radiation. It is assumed that the grating is formed by thin films containing two-level atoms with the triply degenerate upper energy level. The system of

  9. 870nm Bragg grating in single mode TOPAS microstructured polymer optical fibre

    DEFF Research Database (Denmark)

    Yuan, Wu; Webb, David J.; Kalli, Kyriacos;

    2011-01-01

    We report the fabrication and characterization of a fiber Bragg grating (FBG) with 870 nm resonance wavelength in a single-mode TOPAS microstructured polymer optical fiber (mPOF). The grating has been UV-written with the phase-mask technique using a 325 nm HeCd laser. The static tensile strain se...

  10. A Novel Fiber Bragg Grating with Triangular Spectrum and Its Application in Strain Sensor

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A novel fiber Bragg grating with triangular spectrum is presented. A strain sensor based on this fiber grating is proposed. Experiments showed that the sensor has advantages of high sensitivity, wider measuring range and immunity to fluctuation of the light source power.

  11. Direct Writing of Fiber Bragg Grating in Microstructured Polymer Optical Fiber

    DEFF Research Database (Denmark)

    Stefani, Alessio; Stecher, Matthias; Town, G. E.;

    2012-01-01

    We report point-by-point laser direct writing of a 1520-nm fiber Bragg grating in a microstructured polymer optical fiber (mPOF). The mPOF is specially designed such that the microstructure does not obstruct the writing beam when properly aligned. A fourth-order grating is inscribed in the m...

  12. Modelling and Simulation of Temperature Sensitivity of Bragg Grating Sensor for Structural Health Monitoring Application

    Directory of Open Access Journals (Sweden)

    Bilkish Mondal

    2014-03-01

    Full Text Available Here in this paper we presented the modelling of Fiber Bragg Grating (FBG as temperature sensor for structural health monitoring application is geometrically designed in the wavelength window of 1.568-1.580μm. Simulation has been done by using optical software R-Soft (GratingMOD.

  13. Accuracy of needle position measurements using fiber Bragg gratings.

    Science.gov (United States)

    Henken, Kirsten; Van Gerwen, Dennis; Dankelman, Jenny; Van Den Dobbelsteen, John

    2012-11-01

    Accurate placement of the needle tip is essential in percutaneous therapies such as radiofrequency ablation (RFA) of liver tumors. Use of a robotic system for navigating the needle could improve the targeting accuracy. Real-time information on the needle tip position is needed, since a needle deflects during insertion in tissue. Needle shape can be reconstructed based on strain measurements within the needle. In the current experiment we determined the accuracy with which the needle tip position can be derived from strain measurements using Fiber Bragg Gratings (FBGs). Three glass fibers equipped with two FBGs each were incorporated in a needle. The needle was clamped at one end and deformed by applying static radial displacements at one or two locations. The FBG output was used for offline estimation of the needle shape and tip position. During deflections of the needle tip up to 12.5 mm, the tip position was estimated with a mean accuracy of 0.89 mm (std 0.42 mm). Adding a second deflection resulted in an error of 1.32 mm (std 0.48 mm). This accuracy is appropriate for applications such as RFA of liver tumors. The results further show that the accuracy can be improved by optimizing the placement of FBGs. PMID:22455615

  14. Perimeter security alarm system based on fiber Bragg grating

    Science.gov (United States)

    Zhang, Cui; Wang, Lixin

    2010-11-01

    With the development of the society and economy and the improvement of living standards, people need more and more pressing security. Perimeter security alarm system is widely regarded as the first line of defense. A highly sensitive Fiber Bragg grating (FBG) vibration sensor based on the theory of the string vibration, combined with neural network adaptive dynamic programming algorithm for the perimeter security alarm system make the detection intelligently. Intelligent information processing unit identify the true cause of the vibration of the invasion or the natural environment by analyzing the frequency of vibration signals, energy, amplitude and duration. Compared with traditional perimeter security alarm systems, such as infrared perimeter security system and electric fence system, FBG perimeter security alarm system takes outdoor passive structures, free of electromagnetic interference, transmission distance through optical fiber can be as long as 20 km It is able to detect the location of event within short period of time (high-speed response, less than 3 second).This system can locate the fiber cable's breaking sites and alarm automatically if the cable were be cut. And the system can prevent effectively the false alarm from small animals, birds, strong wind, scattering things, snowfalls and vibration of sensor line itself. It can also be integrated into other security systems. This system can be widely used in variety fields such as military bases, nuclear sites, airports, warehouses, prisons, residence community etc. It will be a new force of perimeter security technology.

  15. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    Science.gov (United States)

    Butov, Oleg V.; Golant, Konstantin M.; Shevtsov, Igor'A.; Fedorov, Artem N.

    2015-08-01

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded "in-situ" in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers.

  16. Fiber Bragg gratings in the radiation environment: Change under the influence of radiolytic hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Butov, Oleg V., E-mail: obutov@mail.ru; Golant, Konstantin M. [Kotel' nikov Institute of Radio-Engineering and Electronics of RAS, 11-7 Mokhovaya Str., Moscow 125009 (Russian Federation); Shevtsov, Igor' A.; Fedorov, Artem N. [Prolog LLC, PO Box 3007, Obninsk, the Kaluga Region 249033 (Russian Federation)

    2015-08-21

    The change of the transmission spectra of fiber Bragg gratings written in the optical fibers, whose silica cores are doped with either germanium or nitrogen, is studied experimentally under the influence of gamma-radiation. The transmission spectra in the neighborhood of the resonance (Bragg) wavelengths were regularly recorded “in-situ” in the course of irradiation during 24 days. For this purpose, uncoated gratings were placed in a pool near the spent fuel rods of a nuclear reactor. The fibers with the gratings written in them were in immediate contact with water. The estimated total absorbed radiation dose of the fibers is approximately 5 MGy. Molecular hydrogen, which is produced by radiolysis of water and penetrates into the core of silica fiber, is found to interact with the defects of Ge-doped silica induced by gamma-radiation, thereby causing a strong impact on the parameters of the spectrum of the Bragg gratings. On the contrary, in the case of gratings inscribed in N-doped silica fibers, the hydrogen molecules interact with defects induced in the course of laser UV exposure during the grating writing only. The possible subsequent formation of additional defects in N-doped silica under the influence of gamma-radiation has no substantial impact on the transmission spectra of Bragg gratings, which remained stable. The obtained results suggest that a small amount of molecular hydrogen resided in the fiber core is the main source of radiation instability of Ge-doped fiber Bragg grating sensors in radiation environments. These hydrogen molecules can remain in the Bragg gratings, in particular, after the inscription process in the hydrogen-loaded fibers.

  17. Tunable channel drop filters consisting of a tilted Bragg grating and a mode sorting polymer waveguide.

    Science.gov (United States)

    Park, Tae-Hyun; Shin, Jin-Soo; Huang, Guanghao; Chu, Woo-Sung; Oh, Min-Cheol

    2016-03-21

    Optical wavelength filters with large tuning range and narrow bandwidth are crucial for enhancing the capability of WDM communication systems. A polymeric tunable filter for C-band, comprising a tilted Bragg grating and a mode sorting waveguide junction is proposed in this work. For dropping a certain wavelength signal, the tilted Bragg grating reflects an odd mode into an even mode and then the reflected even mode propagates towards an output port of the asymmetric Y-junction due to the mode sorting. Consequently, the output port is separated from the input port, which is not possible in an ordinary Bragg reflector. The tilted Bragg reflector with an odd-even mode coupling efficiency of 61% exhibited a maximum reflectivity of 95% for a grating of 6 mm. A linear wavelength tuning of over 10 nm was achieved for an applied thermal power of 312 mW.

  18. Development of a Fibre Bragg Grating Sensor for Rock Deformation Monitoring

    Science.gov (United States)

    Kanopoulos, Patrick Paskalis

    This thesis examines the theoretical and experimental performance of a fibre Bragg grating sensor for static and dynamic strain measurement in hard rock. A literature review focuses on the fundamental theory of fibre Bragg gratings, various physical demodulation schemes used to interrogate Bragg sensors with an emphasis on charge coupled device spectrometry, as well as the aliasing behaviour of Bragg gratings as sensors. A coupled numerical-analytical analysis is conducted on various sensor configurations designed for borehole deployment in order to establish the response of the strain sensors under various strain conditions. The findings of an experimental investigation of two sensors subjected to uniaxial strain within a grout and a rock specimen are presented. The experimental data confirm the feasibility of using the proposed sensor as a part of an integrated optical strain sensing network.

  19. A strain-induced birefringent double-clad fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Lijun Li; Lei Sun; Wande Fan; Zhi Wang; Jianhua Luo; Shenggui Fu; Shuzhong Yuan; Xiaoyi Dong

    2005-01-01

    @@ A strain-induced birefringence double-clad (DC) fiber Bragg grating (FBG) is proposed and demonstrated.The grating is fabricated in the core of rectangular inner cladding double clad fiber by using phase mask method. By applying lateral strain on the grating, the birefringence is induced. In order to detect the birefringent effect of the grating, we use it as the output mirror of a laser. When lateral strain is applied,the grating becomes birefringent. Therefore, one reflection peak of double-clad fiber Bragg grating becomes two peaks and the laser also lases in two wavelengths. The wavelength spacing of the laser can be tuned from 0 to 0.8 nm. The absolute wavelengths for the two polarizations can be tuned 1.2 and 2.0 nm,respectively.

  20. Multiband processing of multimode light: combining 3D photonic lanterns with waveguide Bragg gratings

    OpenAIRE

    Spaleniak, Izabela; Gross, Simon; Jovanovic, Nemanja; Williams, Robert J.; Lawrence, Jon S.; Ireland, Michael J.; Withford, Michael J.

    2013-01-01

    The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The res...

  1. Analysis of sampled fiber Bragg gratings in polarization-maintaining fiber

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    A novel type of sampled fiber Bragg gratings (FBGs) written in polarization-maintaining fiber (PMF) is proposed.The reflection spectrum,time delay,and group velocity dispersion (GVD) of the gratings are analyzed.In addition,the reflection spectrum is optimized by apodization.The scheme of multi-wavelength output based on the gratings is proposed,which could be used as a multi-wavelength polarization filter in the density wavelength division multiplexed (DWDM) system.

  2. A novel dual-wavelength fiber Bragg grating and its application in fiber ring laser

    Institute of Scientific and Technical Information of China (English)

    姜莉; 张东生; 董兴法; 开桂云; 董孝义

    2004-01-01

    A novel method for fabricating dual-wavelength fiber Bragg gratings (FBGs) by using one phase mask is developed. The method is based on a double-exposure technique. Our technique lends itself to writing gratings with controllable reflectivity and separation of two Bragg wavelengths. A grating with two equal transmission peaks of 20.25 dB is obtained by this method and the separation of the two Bragg wavelengths is about 0.8 nm. With the grating, we demonstrate a dual-wavelength erbium-doped fiber ring laser whose interval of the two peaks is 0.8 nm. The laser's peak powers can get 3.1 mW above and have a good stability.

  3. Characteristics of Bragg Gratings in All-Solid Photonic Bandgap Fiber

    Institute of Scientific and Technical Information of China (English)

    Bai-Ou Guan; Zhi Wang; Yang Zhang; Da Chen

    2008-01-01

    We report on fiber Bragg gratings in all-solid photonie bandgap fiber that was composed of a triangular array of high-index Ge-doped rods in pure silica background with fluorine-doped index-depressed layer surrounding the Ge-doped rod. Fiber Bragg gratings were photowritten with 193 nm ArF excimer laser and characterized for their response to strain, temperature, bending, and torsion. These gratings couple light from the forward core mode to not only backward core mode but also backward rod modes. This results in multiple resonance peaks in the reflection spectrum. All resonance wavelengths exhibited the same temperature and strain response with coefficient similar to that of Bragg gratings in standard single-mode fiber. The strength of the resonance peaks corresponding to the backward rod modes showed high sensitivity to bending and torsion.

  4. Design of a Label-Free, Distributed Bragg Grating Resonator Based Dielectric Waveguide Biosensor

    Directory of Open Access Journals (Sweden)

    Florian Kehl

    2015-01-01

    Full Text Available In this work, we present a resonant, dielectric waveguide device based on distributed Bragg gratings for label-free biosensing applications. The refractive index sensitive optical transducer aims at improving the performance of planar waveguide grating sensor systems with limited Q-factor and dynamic range by combing the advantages of resonant cavities, such as a multitude of resonance peaks with high finesse, with the manageable complexity of waveguide grating couplers. The general sensor concept is introduced and supported by theoretical considerations as well as numerical simulations based on Coupled Mode Theory. In contrast to a single Bragg grating reflector, the presented Fabry-Pérot type distributed Bragg resonator exhibits an extended measurement range as well as relaxed fabrication tolerances. The resulting, relatively simple sensor structure can be fabricated with standard lithographic means and is independent of expensive light-sources and/or detectors, making an affordable but sensitive device, potentially suitable for point-of-care applications.

  5. Bragg Grating Based Sensors in Microstructured Polymer Optical Fibers: Accelerometers and Microphones

    DEFF Research Database (Denmark)

    Stefani, Alessio

    With the growing interest towards fiber Bragg grating sensors and the growing ability in manufacturing polymer optical fibers, the development of polymer fiber Bragg sensors has catched the attention of industries with the goal of developing high performance sensors. This thesis presents...... the development of fiber sensors based on polymer optical fiber Bragg gratings. The whole process from the preform to the device is discussed and reported. A presentation on the fiber drawing technique used is given. Issues encountered when working with polymer fibers and solutions concerning fiber cleaving...... gratings is shown and temperature compensation of strain sensors, by using two adjacent gratings, is demonstrated. Humidity insensitivity in a strain sensor based on a TOPAS fiber is also shown. In order to investigate the possibility of using viscoelastic materials, such as polymers, in dynamic sensors...

  6. Numerical Analysis of Fiber Bragg Grating and Long Period Fiber Grating Undergoing Linear and Quadratic Temperature Change

    Institute of Scientific and Technical Information of China (English)

    YUAN Yinquan; DING Liyun

    2009-01-01

    The coupled-mode equations for fiber Bragg grating(FBG)and long period fiber grating(LPFG)undergoing linear and quadratic temperature change were given.The effects of tem-perature gradient and quadratic temperature change on the reflectivity spectrum of fiber Braggs grating and the transmission spectrum of long period fiber grating were investigated using the numerical simulation,and the dependence relationships of the central wavelength shift,the full-width-at-half-maximum,and the peak intensity upon temperature gradient were also obtained.These relation-ships may be used to design a novel fiber optical sensor which can simultaneously measure the tem-perature and temperature gradient.

  7. The influence of adhesive on fiber Bragg grating strain sensor

    Science.gov (United States)

    Chen, Jixuan; Gong, Huaping; Jin, Shangzhong; Li, Shuhua

    2009-08-01

    A fiber Bragg grating (FBG) sensor was fixed on the uniform strength beam with three adhesives, which were modified acrylate, glass glue and epoxy resin. The influence of adhesive on FBG strain sensor was investigated. The strain of FBG sensor was varied by loading weight to the uniform strength beam. The wavelength shift of the FBG sensor fixed by the three kinds of adhesive were measured with different weight at the temperatures 0°C, 10°C, 20°C, 30°C, 40°C. The linearity, sensitivity and their stability at different temperature of FBG sensor which fixed by every kind of adhesives were analyzed. The results show that, the FBG sensor fixed by the modified acrylate has a high linearity, and the linear correlation coefficient is 0.9996. It also has a high sensitivity which is 0.251nm/kg. The linearity and the sensitivity of the FBG sensor have a high stability at different temperatures. The FBG sensor fixed by the glass glue also has a high linearity, and the linear correlation coefficient is 0.9986, but it has a low sensitivity which is only 0.041nm/kg. The linearity and the sensitivity of the FBG sensor fixed by the glass glue have a high stability at different temperatures. When the FBG sensor is fixed by epoxy resin, the sensitivity and linearity is affected significantly by the temperature. When the temperature changes from 0°C to 40°C, the sensitivity decreases from 0.302nm/kg to 0.058nm/kg, and the linear correlation coefficient decreases from 0.9999 to 0.9961.

  8. Using Dual-wavelength Fiber Bragg Gratings for Temperature and Strain Sensing at Cryogenic Temperature

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.; Rogowski, Robert S.; DeHaven, Stanton L.

    2003-01-01

    By using dual-wavelength fiber-optic Bragg gratings, a new technique has been developed for sensing both temperature and strain simultaneously in cryogenic temperature range. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a dual-wavelength sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. These coefficients were used to construct the elements of the K matrix, which enables to determine inversely the strain and temperature changes by measuring the wavelength shifts of the dual-wavelength Bragg grating. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found from about 70 K to 140 K. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. Several alternatives are proposed to resolve this problem. The effectiveness and sensitivities of these measurements in different temperature ranges are discussed. The separation of two wavelengths for the dual-wavelength Bragg grating has been widened to increase the sensitivities of measurement; however, this separation can still be covered in the scanning range from single scanning laser.

  9. Adaptive Integrated Optical Bragg Grating in Semiconductor Waveguide Suitable for Optical Signal Processing

    Science.gov (United States)

    Moniem, T. A.

    2016-05-01

    This article presents a methodology for an integrated Bragg grating using an alloy of GaAs, AlGaAs, and InGaAs with a controllable refractive index to obtain an adaptive Bragg grating suitable for many applications on optical processing and adaptive control systems, such as limitation and filtering. The refractive index of a Bragg grating is controlled by using an external electric field for controlling periodic modulation of the refractive index of the active waveguide region. The designed Bragg grating has refractive indices programmed by using that external electric field. This article presents two approaches for designing the controllable refractive indices active region of a Bragg grating. The first approach is based on the modification of a planar micro-strip structure of the iGaAs traveling wave as the active region, and the second is based on the modification of self-assembled InAs/GaAs quantum dots of an alloy from GaAs and InGaAs with a GaP traveling wave. The overall design and results are discussed through numerical simulation by using the finite-difference time-domain, plane wave expansion, and opto-wave simulation methods to confirm its operation and feasibility.

  10. Field Deployable Fiber Bragg Grating Strain Patch for Long-Term Stable Health Monitoring Applications

    Directory of Open Access Journals (Sweden)

    Gerhard Kalinka

    2013-01-01

    Full Text Available A fiber Bragg grating (FBG strain patch specially adapted for long-term and high-strain applications has been developed and characterized. The design concept for the patch is based on a glass-fiber reinforced plastic (gfrp carrier material. The developed concept for the FBG integration into the carrier material was derived from reliable integration procedure of FBG sensors into composite structures. The patches’ temperature sensitivity, strain gauge factor, fiber–matrix interface adhesion and fatigue behavior were characterized. As a result, FBG strain patches with linear temperature and strain behavior, as well as excellent fatigue resistance, were developed and can be used as part of a monitoring system for advanced composite materials in aerospace structures or wind turbine power plants.

  11. Bandwidth-Tunable Fiber Bragg Gratings Based on UV Glue Technique

    Science.gov (United States)

    Fu, Ming-Yue; Liu, Wen-Feng; Chen, Hsin-Tsang; Chuang, Chia-Wei; Bor, Sheau-Shong; Tien, Chuen-Lin

    2007-07-01

    In this study, we have demonstrated that a uniform fiber Bragg grating (FBG) can be transformed into a chirped fiber grating by a simple UV glue adhesive technique without shifting the reflection band with respect to the center wavelength of the FBG. The technique is based on the induced strain of an FBG due to the UV glue adhesive force on the fiber surface that causes a grating period variation and an effective index change. This technique can provide a fast and simple method of obtaining the required chirp value of a grating for applications in the dispersion compensators, gain flattening in erbium-doped fiber amplifiers (EDFAs) or optical filters.

  12. Fused-silica sandwiched three-port grating under second Bragg angle incidence

    Science.gov (United States)

    Li, Hongtao; Wang, Bo; Pei, Hao; Chen, Li; Lei, Liang; Zhou, Jinyun

    2016-05-01

    The fused-silica sandwiched three-port grating under second Bragg angle incidence is presented with operation in transmission. To obtain a highly-efficient three-port grating for a working wavelength of 800 nm, the grating depth and period should be optimized by using rigorous coupled-wave analysis. With the optimized different three-port grating depths and periods, both TE-polarized and TM-polarized waves can be diffracted into three orders with nearly 33% efficiency for the given duty cycle of 0.6. Based on the grating parameters of numerical optimization, modal method may be employed to explain the physical mechanism of the beam propagation in the grating and analyze the splitting behavior. For the sandwiched three-port grating, it is feasible that the diffraction efficiencies can be enhanced for both TE and TM polarizations.

  13. Simultaneous Temperature and Strain Sensing for Cryogenic Applications Using Dual-Wavelength Fiber Bragg Gratings

    Science.gov (United States)

    Wu, Meng-Chou; Prosser, William H.

    2003-01-01

    A new technique has been developed for sensing both temperature and strain simultaneously by using dual-wavelength fiber-optic Bragg gratings. Two Bragg gratings with different wavelengths were inscribed at the same location in an optical fiber to form a sensor. By measuring the wavelength shifts that resulted from the fiber being subjected to different temperatures and strains, the wavelength-dependent thermo-optic coefficients and photoelastic coefficients of the fiber were determined. This enables the simultaneous measurement of temperature and strain. In this study, measurements were made over the temperature range from room temperature down to about 10 K, addressing much of the low temperature range of cryogenic tanks. A structure transition of the optical fiber during the temperature change was found. This transition caused splitting of the waveforms characterizing the Bragg gratings, and the determination of wavelength shifts was consequently complicated. The effectiveness and sensitivities of these measurements in different temperature ranges are also discussed.

  14. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    International Nuclear Information System (INIS)

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  15. Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

    Institute of Scientific and Technical Information of China (English)

    Wang Kui-Ru; Cheng Jie-Lin; Sang Xin-Zhu; Chen Gong

    2011-01-01

    This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating. We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons. Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion, which is much more approximate to the light source for the practical purpose. We discuss in detail the effects of the soliton's velocity with some parameters in the process of transmission. The results show that by choosing special parameters, one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale.

  16. A temperature insensitive Bragg grating sensor - using orthogonal polar polarisation modes for in situ temperature compensation

    OpenAIRE

    Parker, R M; J.C.Gates; Grossel, M. C.; P.G.R.Smith

    2010-01-01

    An exposed Bragg grating incorporated into a planar waveguide forms an optical device that acts as a refractive index sensor. The exposed evanescent field causes the Bragg peak to be sensitive to the refractive index of its surroundings and can be used to detect changes in this environment. The method reported is able to provide accurate temperature compensation by applying a scaling factor derived from measurement of the birefringence of the transverse electric (TE) and transverse magnetic (...

  17. Fiber Bragg Gratings in Small-Core Ge-Doped Photonic Crystal Fibers

    Institute of Scientific and Technical Information of China (English)

    Yiping Wang; Hartmut Bartelt; Wolfgang Ecke; Reinhardt Willsch; Jens Kobelke; Michael Kautz; Sven Brueckner; Manfred Rothhardt

    2008-01-01

    This paper reports fiber Bragg gratings (FBGs) inscribed in a small-core Ge-doped photonic crystal fibers with a UV laser and a Talbot inter-ferometer. The responses of such FBGs to temper-ature, strain, bending, and transverse-loading were systematically investigated. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and trans-verse-loading. The bending and transverse- loading properties of the FBGs are sensitive to the fiber orientations.

  18. PROTECTIVE COATINGS OF FIBER BRAGG GRATING FOR MINIMIZING OF MECHANICAL IMPACT ON ITS WAVELENGTH CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    A. S. Munko

    2015-03-01

    Full Text Available The paper deals with the scheme for the study of the Bragg wavelength shift dependence on the applied tensile force. Samples of fiber Bragg gratings with different coatings have been studied: the restored acrylate coating, the heatshrinkable fusion splice protection sleeve without metal rod, the heat-shrinkable fusion splice protection sleeve with a metal rod, the metal capillary, polyvinylchloride tube. For different coatings of diffractive structure, dependences of wavelength shift for the Bragg grating resonance have been obtained on the tensile strength applied to the ends of an optical fiber. It was determined that the studied FBG coatings give the possibility to reduce the mechanical impact on the Bragg wavelength shift for 1.1-15 times as compared to an uncoated waveguide. The most effective version of coated fiber Bragg grating is the heatshrinkable fusion splice protection sleeve with a metal rod. When the force (equal to 6 N is applied to the 100 mm optical fiber area with the inscribed diffractive structure, the Bragg wavelength shift is 7.5 nm for the unprotected sample and 0.5 nm for the one coated with the heat-shrinkable fusion splice protection sleeve.

  19. Interrogating a Fiber Bragg Grating Vibration Sensor by Narrow Line Width Light

    Institute of Scientific and Technical Information of China (English)

    Jun Chang; Dian-Heng Huo; Liang-Zhu Ma; Xiao-Hui Liu; Tong-Yu Liu; Chang Wang

    2008-01-01

    A method to interrogate fiber Bragg grating vibration sensor by narrow line width light is demonstrated. The interrogation scheme takes advantage of the intensity modulation of narrow spectral bandwidth light, such as distributed feedback laser, when a reflection or transmission spectrum curve of an fiber Bragg grating (FBG) moves due to the strain which is applied on the sensor. The sensor's response to accelerating frequency and amplitude is measured by experiment. The factors which have impacts on the sensitivity of the interrogation system are also discussed.

  20. Magnetic field sensor based on fiber Bragg grating with a spiral microgroove ablated by femtosecond laser.

    Science.gov (United States)

    Dai, Yutang; Yang, Minghong; Xu, Gang; Yuan, Yinquan

    2013-07-15

    A novel magnetic field sensor based on Terfenol-D coated fiber Bragg grating with spiral microstructure was proposed and demonstrated. Through a specially-designed holder, the spiral microstructure was ablated into the fiber Bragg grating (FBG) cladding by femtosecond laser. Due to the spiral microstructure, the sensitivity of FBG coated with magnetostrictive film was enhanced greatly. When the spiral pitch is 50 μm and microgroove depth is 13.5 μm, the sensitivity of the magnetic field sensor is roughly 5 times higher than that of non-microstructured standard FBG. The response to magnetic field is reversible, and could be applicable for magnetic field detection.

  1. Novel Distributed Fiber Bragg Grating Sensing System Based on M-Z Interferometer

    Institute of Scientific and Technical Information of China (English)

    WU Guo-qing; BI Wei-hong; LI Hong

    2005-01-01

    One of the problems in using grating sensors is how to measure a small Bragg wavelength shift accurately. Nowadays demodulation techniques are mainly based on the edge filter, tunable filter, or interferometric scanning methods. Interferometric demodulation is widely accepted as the technology which can provide the high sensitivity. An interrogation system using the interferometric scanning method is presented, in which an unbalanced fiber M-Z interferometer is used as the wavelength scanner for temperature measurement. A novel fiber Bragg grating sensor system based on M-Z interferometric demodulation technique is presented in this paper. The temperature sensitivity measured in the experiment is almost consistent with that obtained from the theoretic calculation.

  2. A flat microwave photonic filter based on M-Z modulatorand fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    QI Chun-hui; PEI Li; NING Ti-gang; GUO Lan; WU Shu-qiang; ZHAO Rui-feng; RUAN Yi

    2009-01-01

    A new multiple-taps and flat microwave photonic filter, which is composed of fiber Bragg grating, M-Z modulator and erbium-doped fiber, is put forward. The flat band-pass or flat band-stop response can be realized by adjusting the coupler's factor and the reflectivity of the fiber Bragg grating or the gain of the erbium-doped fiber. The free spectral range of the filter can be tuned by controlling the length of the erbium-doped fiber. The potential and feasibility of the proposed filtering structures have been demonstrated by simulation.

  3. Direct UV written planar Bragg gratings that feature zero fluence induced birefringence

    Science.gov (United States)

    Holmes, Christopher; Cooper, Peter A.; Fernando, Harendra N. J.; Stroll, Andreas; Gates, James C.; Krishnan, Chirenjeevi; Haynes, Roger; Mennea, Paolo L.; Carpenter, Lewis G.; Gawith, Corin B. E.; Roth, Martin M.; Charlton, Martin D.; Smith, Peter G. R.

    2015-12-01

    Direct UV writing is a planar fabrication process capable of simultaneously defining waveguides and Bragg gratings. The technique is fully computer controlled and uniquely uses a small focused spot ~7 μm in diameter for direct writing exposure. This work investigates its use to achieve phase trimming and Bragg grating definition in silica-on-silicon lithographic waveguides. It is observed that birefringence control using direct UV writing can be made independent of exposure fluence with this technique through tailoring substrate stress. The result is demonstrated experimentally and supported theoretically using finite element analysis.

  4. A Directly-Written Monolithic Waveguide-Laser Incorporating a DFB Waveguide-Bragg Grating

    CERN Document Server

    Marshall, Graham D; Ams, Martin; Piper, James A; Withford, Michael J

    2008-01-01

    We report the fabrication and performance of the first C-band directly-written monolithic waveguide-laser. The waveguide-laser device was created in an Erbium and Ytterbium doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-Bragg grating simultaneously and in a single processing step. The waveguide-laser was optically pumped at approximately 980 nm and lased at 1537nm with a bandwidth of less than 4 pm.

  5. Dynamic Landslide Deformation Monitoring with Fiber Bragg Grating Sensors

    Science.gov (United States)

    Moore, J. R.; Gischig, V.; Button, E.; Loew, S.

    2009-12-01

    Fiber optic (FO) strain sensors are a promising new technology for in-situ landslide monitoring. General performance advantages include high resolution, fast sampling rate, and insensitivity to electrical disturbances. Here we describe a new FO monitoring system based on long-gage fiber Bragg grating sensors installed at the Randa Rockslide Laboratory in southern Switzerland. We highlight the advantages and disadvantages of the system, describe relevant first results, and compare FO data to that from traditional instruments already installed on site. The Randa rock slope has been the subject of intensive research since its failure in 1991. Around 5 million cubic meters of rock remains unstable today, moving at rates up to 20 mm / year. Traditional in-situ monitoring techniques have been employed to understand the mechanics and driving forces of the currently unstable rock mass, however these investigations are limited by the resolution and low sampling rate of the sensors. The new FO monitoring system has micro-strain resolution and offers the capability to detect sub-micrometer scale deformations in both triggered-dynamic and continuous measurements. Two types of sensors have been installed: fully-embedded borehole sensors encased in grout at depths of 38, 40, and 68 m, and surface extensometers spanning active tension cracks. Dynamic measurements are triggered by sensor deformation and recorded at 100 Hz, while continuous measurements are logged every 5 minutes. Since installation in August 2008, the FO monitoring system has been operational 90% of the time. Time series deformation data show movement rates consistent with previous borehole extensometer surveys. Accelerated displacements following installation are likely related to long-term curing and dewatering of the grout. A number of interesting transients have been recorded, which in some cases were large enough to trigger rapid sampling. The combination of short- and long-term observation offers new

  6. Feasibility of Fiber Bragg Grating and Long-Period Fiber Grating Sensors under Different Environmental Conditions

    Directory of Open Access Journals (Sweden)

    Jian-Neng Wang

    2010-11-01

    Full Text Available This paper presents the feasibility of utilizing fiber Bragg grating (FBG and long-period fiber grating (LPFG sensors for nondestructive evaluation (NDE of infrastructures using Portland cement concretes and asphalt mixtures for temperature, strain, and liquid-level monitoring. The use of hybrid FBG and LPFG sensors is aimed at utilizing the advantages of two kinds of fiber grating to implement NDE for monitoring strains or displacements, temperatures, and water-levels of infrastructures such as bridges, pavements, or reservoirs for under different environmental conditions. Temperature fluctuation and stability tests were examined using FBG and LPFG sensors bonded on the surface of asphalt and concrete specimens. Random walk coefficient (RWC and bias stability (BS were used for the first time to indicate the stability performance of fiber grating sensors. The random walk coefficients of temperature variations between FBG (or LPFG sensor and a thermocouple were found in the range of −0.7499 °C/ to −1.3548 °C/. In addition, the bias stability for temperature variations, during the fluctuation and stability tests with FBG (or LPFG sensors were within the range of 0.01 °C/h with a 15–18 h time cluster to 0.09 °C/h with a 3–4 h time cluster. This shows that the performance of FBG or LPFG sensors is comparable with that of conventional high-resolution thermocouple sensors under rugged conditions. The strain measurement for infrastructure materials was conducted using a packaged FBG sensor bonded on the surface of an asphalt specimen under indirect tensile loading conditions. A finite element modeling (FEM was applied to compare experimental results of indirect tensile FBG strain measurements. For a comparative analysis between experiment and simulation, the FEM numerical results agreed with those from FBG strain measurements. The results of the liquid-level sensing tests show the LPFG-based sensor could discriminate five stationary liquid

  7. Dynamic interrogator for elastic wave sensing using Fabry Perot filters based on fiber Bragg gratings.

    Science.gov (United States)

    Harish, Achar V; Varghese, Bibin; Rao, Babu; Balasubramaniam, Krishnan; Srinivasan, Balaji

    2015-07-01

    Use of in-fiber Fabry-Perot (FP) filters based on fiber Bragg gratings as both sensor as well as an interrogator for enhancing the detection limit of elastic wave sensing is investigated in this paper. The sensitivity of such a demodulation scheme depends on the spectral discrimination of the sensor and interrogator gratings. Simulations have shown that the use of in-fiber FP filters with high finesse provide better performance in terms of sensitivity compared to the demodulation using fiber Bragg gratings. Based on these results, a dynamic interrogator capable of sensing acoustic waves with amplitude of less than 1 micro-strain over frequencies of 10 kHz to several 100 kHz has been implemented. Frequency response of the fiber Bragg gratings in the given experimental setup has been compared to that of the conventional piezo sensors demonstrating that fiber Bragg gratings can be used over a relatively broad frequency range. Dynamic interrogator has been packaged in a compact box without any degradation in its performance.

  8. Fiber Optic Fabry-Perot Current Sensor Integrated with Magnetic Fluid Using a Fiber Bragg Grating Demodulation

    OpenAIRE

    Ji Xia; Qi Wang; Xu Liu; Hong Luo

    2015-01-01

    An optical fiber current sensor based on Fabry-Perot interferometer using a fiber Bragg grating demodulation is proposed. Magnetic fluid is used as a sensitive medium in fiber optical Fabry-Perot (F-P) cavity for the optical characteristic of magnetic-controlled refractive index. A Fiber Bragg grating (FBG) is connected after the F-P interferometer which is used to reflect the optical power at the Bragg wavelength of the interference transmission spectrum. The corresponding reflective power o...

  9. Multiband processing of multimode light: combining 3D photonic lanterns with waveguide Bragg gratings

    CERN Document Server

    Spaleniak, Izabela; Jovanovic, Nemanja; Williams, Robert J; Lawrence, Jon S; Ireland, Michael J; Withford, Michael J

    2013-01-01

    The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings were fabricated using the femtosecond direct-write technique in boro-aluminosilicate glass (Corning, Eagle 2000). Transmission dips of up to 5 dB were measured in both photonic lanterns and reference single-mode waveguides with 10.4-mm-long gratings. The result demonstrates efficient and symmetrical performance of each of the gratings in the photonic lantern. Such devices will be beneficial to space-division multiplexed communication systems as well as for units for astronomical instrumentation for suppression of the atmospheric telluric emission from OH lines.

  10. Anderson localization in a partially random Bragg grating and a conserved area theorem

    CERN Document Server

    Mafi, Arash

    2015-01-01

    We investigate the gradual emergence of the disorder-related phenomena in intermediate regimes between a deterministic periodic Bragg grating and a fully random grating and highlight two critical properties of partially disordered Bragg gratings. First, the integral of the logarithm of the transmittance over the reciprocal wavevector space is a conserved quantity. Therefore, adding disorder merely redistributes the transmittance over the reciprocal space. Second, for any amount of disorder, the average transmittance decays exponentially with the number of grating layers in the simple form of $\\exp(-\\eta N)$ for sufficiently large $N$, where $\\eta$ is a constant and $N$ is the number of layers. Conversely, the simple exponential decay form does not hold for small $N$ except for a highly disordered system. Implications of these findings are demonstrated.

  11. Femtosecond laser inscription of Bragg and complex gratings in coated and encapsulated silica and low-loss polymer optical fibers

    Science.gov (United States)

    Kalli, Kyriacos; Lacraz, Amedee; Polis, Michael; Othonos, Andreas

    2015-09-01

    The development of wavelength filters, such as Bragg and superstructure gratings in glass and polymer optical fibers, using a femtosecond laser is reported. By using a femtosecond laser operating in the green, which offers greater inscription efficiency, we demonstrate the reliable inscription of Bragg and superstructure gratings in coated silica and low-loss CYTOP polymer optical fibers. We employ line by line and point by point inscription methods, allowing for multiple and overlapping gratings in the fiber core. Moreover, we demonstrate a novel fibre Bragg grating inscription technique to modify and add versatility to an existing, encapsulated optical fiber pressure sensor.

  12. Performance analysis of peak tracking techniques for fiber Bragg grating interrogation systems

    OpenAIRE

    Olivero, Massimo; Tosi, Daniele; Perrone, Guido

    2012-01-01

    In this paper, we propose a spectral correlation-based technique for tracking the wavelength shift of a fiber Bragg grating. We compared this approach, by means of a Monte Carlo numerical simulation, to the typical peak tracking techniques applied in classic interrogation systems. As result, we obtained a considerable gain in terms of noise tolerance (about 20 dB), which can be further incremented by selecting large-bandwidth gratings. This permits to increase the power budget of a fiber Brag...

  13. Anomalous thermal dynamics of Bragg gratings inscribed in germanosilicate optical fiber

    OpenAIRE

    Rahman, A.; Madhav, Venu K; B. Srinivasan; S. Asokan

    2009-01-01

    An interesting, periodic appearance of a new peak has been observed in the reflected spectrum of a Fiber Bragg Grating (FBG) inscribed in a germanosilicate fiber during thermal treatment. The new peak occurs on the longer wavelength side of the spectrum during heating and on the shorter wavelength side during cooling, following an identical reverse dynamics. Comparison with a commercial grating with 99.9% reflectivity shows a similar decay dynamics. It is proposed that the distortion due to s...

  14. Special Apodized Fiber Bragg Grating for Flat-top Band-pass Reflectivity Filter

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; YANG Hong-bo; YANG Bo-jun; YU Li; ZHANG Xiao-guang

    2004-01-01

    The characteristics of special apodized fiber Bragg grating (FBG) in flat-top pass-band as reflectivity filter are presented. This special apodized FBG was designed by the particle swarm optimization algorithm. Compared with conventional apodized FBG, the special apodized FBG presented was more robust in the flat-top pass-band characteristic even if the strength of grating is very week. This technology is very interesting in designing the filter for wavelength division multiplexing system.

  15. Three-hole microstructured optical fiber for efficient Fiber Bragg Grating refractometer

    OpenAIRE

    Phan Huy, Minh Châu; Laffont, Guillaume; Dewynter, Véronique; Ferdinand, Pierre; Roy, Philippe; Auguste, Jean-Louis; Pagnoux, Dominique; Blanc, Wilfried; Dussardier, Bernard

    2007-01-01

    International audience We present a photosensitive three-hole microstructured optical fiber specifically designed to improve the refractive index sensitivity of a standard Fiber Bragg Grating (FBG) sensor photowritten in the suspended Ge-doped silica core. We describe the specific photowriting procedure used to realize gratings in such a fiber. We then determine their spectral sensitivity to the refractive index changes of material filling the holes surrounding the core. The sensitivity is...

  16. Bragg Gratings Induced in Birefringent Optical Fiber with an Elliptical Stress Cladding

    Directory of Open Access Journals (Sweden)

    I. K. Meshkovskiy

    2013-01-01

    Full Text Available The paper presents the results of writing of type I and high-performance type II fiber Bragg gratings in birefringent optical fiber with an elliptical stress cladding by a single 20 ns pulse of KrF excimer laser (248 nm. The gratings’ efficiency produced by a single pulse was up to 100%. Experimental results on visualization of these gratings are presented.

  17. Investigation of code reconfigurable fibre Bragg gratings for Optical Code Division Multiple Access (OCDMA) and Optical Packet Switching (OPS) Networks

    OpenAIRE

    Tian, Chun

    2009-01-01

    This thesis documents my work in the telecommunication system laboratory at the Optoelectronics Research Centre, towards the implementation of code reconfigurable OCDMA and all-optical packet switching nodes based on fibre Bragg grating (FBG) technology. My research work involves characterizing the performance of various gratings, specifically high reflectivity, short chip duration, long code sequences, multiple phase level and tunable superstructured fiber Bragg gratings (SSFBGs), by using t...

  18. Higher Order Diffraction Characteristics of Fiber Bragg Grating

    Directory of Open Access Journals (Sweden)

    Sunita P. Ugale

    2013-02-01

    Full Text Available The effect of grating saturation on higher order diffraction characteristic of FBG is investigated by using Coupled mode theory. Grating saturation effects were considered in the index distribution model showing the significant influence on the coupling process and hence on the reflectivity characteristics of FBG. Maximum reflectivity curves for first and higher order diffraction of FBG are plotted for different values of saturation coefficient. The effect of change in length and change in refractive index are studied. The behavior of grating for higher order of diffraction is totally different than first order of diffraction. In saturated gratings, the higher order diffraction can be utilized for multiparameter sensing

  19. Miniature and low cost fiber bragg grating interrogator for structural monitoring in nano-satellites

    NARCIS (Netherlands)

    Toet, P.M.; Hagen, R.A.J.; Hakkesteegt, H.C.; Lugtenburg, J.; Maniscalco, M.P.

    2014-01-01

    In this paper we present a newly developed Fiber Optic measurement system, consisting of Fiber Bragg Grating (FBG) sensors and an FBG interrogator. The development of the measuring system is part of the PiezoElectric Assisted Smart Satellite Structure (PEASSS) project, which was initiated at the beg

  20. Novel Tunable PMD Compensation Technology Using Linear Chirped Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-min; YU Zhong-yuan; YANG Hong-bo; ZHANG Xiao-guang; YANG Bo-jun

    2004-01-01

    Based on uniform fiber Bragg grating bonded with a magnetostrictive rod in the non-uniform magnetic field, a novel PMD compensation technique is proposed. This all- fiber PMD compensation technology is cost-effective and flexible in designing the differential group delay profile.

  1. Perturbative modeling of Bragg-grating-based biosensors in photonic-crystal fibers

    DEFF Research Database (Denmark)

    Burani, Nicola; Lægsgaard, Jesper

    2005-01-01

    We present a modeling study carried out to support the design of a novel, to our knowledge, kind of photonic-crystal fiber (PCF)-based sensor. This device, based on a PCF Bragg grating, detects the presence of selected single-stranded DNA molecules, hybridized to a biofilm in the air holes of the...

  2. Time-dependent variation of fiber Bragg grating reflectivity in PMMA-based polymer optical fibers

    DEFF Research Database (Denmark)

    Saez-Rodriguez, D.; Nielsen, Kristian; Bang, Ole;

    2015-01-01

    In this Letter, we investigate the effects of viscoelasticity on both the strength and resonance wavelength of two fiber Bragg gratings (FBGs) inscribed in microstructured polymer optical fiber (mPOF) made of undoped PMMA. Both FBGs were inscribed under a strain of 1% in order to increase...

  3. Humidity insensitive step-index polymer optical fibre Bragg grating sensors

    DEFF Research Database (Denmark)

    Woyessa, Getinet; Fasano, Andrea; Stefani, Alessio;

    2015-01-01

    We have fabricated and characterised a humidity insensitive step index(SI) polymer optical fibre(POF) Bragg grating sensors. The fibre was made based on the injection molding technique, which is an efficient method for fast, flexible and cost effective preparation of the fibre preform...

  4. Angle dependent Fiber Bragg grating inscription in microstructured polymer optical fibers

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Bang, Ole

    2015-01-01

    We report on an incidence angle influence on inscription of the Fiber Bragg Gratings in Polymethyl methacrylate (PMMA) microstructured polymer optical fibers. We have shown experimentally that there is a strong preference of certain angles, labeled Gamma K, over the other ones. Angles close...

  5. Bragg waveguide grating as a 1d photonic band gap structure: COST 268 modelling task

    NARCIS (Netherlands)

    Ctyroky, J.; Helfert, S.; Pregla, R.; Bienstman, P.; Baets, R.; Ridder, de R.; Stoffer, R.; Klaasse, G.; Petracek, J.; Lalanne, P.; Hugonin, J.P.; Rue, de la R.M.

    2002-01-01

    Modal reflection, transmission and loss of deeply etched Bragg waveguide gratings were modelled by six European laboratories using independently developed two-dimensional (2D) numerical codes based on four different methods, with very good mutual agreement. It was found that (rather weak) material d

  6. Focused ion beam nano-structuring of Bragg gratings in $Al_2O_3$ channel waveguides

    NARCIS (Netherlands)

    Ay, Feridun; Uranga, Amaia; Bradley, Jonathan D.B.; Wörhoff, Kerstin; Ridder, de René M.; Pollnau, Markus; Ridder, de R.M.; Ay, F.; Kauppinen, L.J.

    2008-01-01

    We report our recent results on an optimization study of focused ion beam (FIB) nano-structuring of Bragg gratings in $Al_2O_3$ channel waveguides. By optimizing FIB milling parameters such as ion current, dwell time, loop repetitions, scanning strategy, and applying a top metal layer for reducing c

  7. A novel tunable polarization mode dispersion compensator with strain chirped fiber Bragg gratings

    Institute of Scientific and Technical Information of China (English)

    Yumin Liu(刘玉敏); Zhongyuan Yu(俞重远); Yuan Zheng(郑远); Xiaoguang Zhang(张晓光); Bojun Yang(杨伯君)

    2004-01-01

    A tunable polarization mode dispersion (PMD) compensator based on strain-chirped fiber Bragg gratings (FBGs) is proposed. It natures in flexible designing, large tuning range, without using linear or nonlinear chirped phase mask, fast tuning response time, continuously adjustable, all-fiber based, compact, and cheap.

  8. Polymer PCF Bragg grating sensors based on poly(methyl methacrylate) and TOPAS cyclic olefin copolymer

    DEFF Research Database (Denmark)

    Johnson, Ian P; Webb, David J; Kalli, Kyriacos;

    2011-01-01

    Fibre Bragg grating (FBG) sensors have been fabricated in polymer photonic crystal fibre (PCF). Results are presented using two different types of polymer optical fibre (POF); first multimode PCF with a core diameter of 50μm based on poly(methyl methacrylate) (PMMA) and second, endlessly single m...

  9. 3D flexible needle steering in soft-tissue phantoms using fiber bragg grating sensors

    NARCIS (Netherlands)

    Abayazid, Momen; Kemp, Marco; Misra, Sarthak

    2013-01-01

    Needle insertion procedures are commonly used for surgical interventions. In this paper, we develop a three-dimensional (3D) closed-loop control algorithm to robotically steer flexible needles with an asymmetric tip towards a target in a soft-tissue phantom. Twelve Fiber Bragg Grating (FBG) sensors

  10. Investigations on birefringence effects in polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Hu, Xiaolian; Saez-Rodriguez, D.; Bang, Ole;

    2014-01-01

    birefringence effects in (m)POFBGs. To achieve this, highly reflective gratings were inscribed with the phase mask technique. They were then monitored in transmission with polarized light. For this, (m)POF sections a few cm in length containing the gratings were glued to angled silica fibers. Polarization...

  11. Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating.

    Science.gov (United States)

    Yang, Tingting; Qiao, Xueguang; Rong, Qiangzhou; Bao, Weijia

    2016-01-01

    An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the "cladding" FBG along the fiber cross-section. PMID:27626427

  12. Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating

    Science.gov (United States)

    Yang, Tingting; Qiao, Xueguang; Rong, Qiangzhou; Bao, Weijia

    2016-01-01

    An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs). The grating structure is fabricated by a femtosecond laser side-illumination technique. Two well-defined resonances are achieved by the downstream both core and cladding fiber Bragg gratings (FBGs). The cladding resonance presents fiber bending dependence, together with a strong orientation dependence because of asymmetrical distribution of the “cladding” FBG along the fiber cross-section. PMID:27626427

  13. Improved thermal and strain performance of annealed polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bache, Morten;

    2011-01-01

    We report on a detailed study of the inscription and characterization of fiber Bragg gratings (FBGs) in commercial step index polymer optical fibers (POFs). Through the growth dynamics of the gratings, we identify the effect of UV-induced heating during the grating inscription. We found that FBGs...... in annealed commercial POFs can offer more stable short-term performance at both higher temperature and larger strain. Furthermore, the FBGs' operational temperature and strain range without hysteresis was extended by the annealing process. We identified long-term stability problem of even the annealed POF...

  14. Fiber Bragg Grating Modeling, Characterization and Optimization with different index profiles

    Directory of Open Access Journals (Sweden)

    SUNITA UGALE

    2010-09-01

    Full Text Available This paper presents the modeling and characterization of an optical fiber grating for maximum reflectivity, minimum side lobe power wastage. Grating length and refractive index profile are the critical parameters in contributing to performance of fiber Bragg grating. The reflection spectra and side lobes strength were analyzed with different lengths and different refractive index profiles. podization techniques are used to get optimized reflection spectra. The simulations are based on solving coupled mode equations by transfer matrix method that describes the interaction of guided modes.

  15. Fiber Optic Vibration Sensor Based on the Tilted Fiber Bragg Grating

    Directory of Open Access Journals (Sweden)

    Jiali An

    2013-01-01

    Full Text Available A temperature-insensitive fiber optic vibration sensor based on the tilted fiber Bragg grating (TFBG is presented. The sensing head is formed by insertion of a small section of MMF between a single-mode fiber and the TFBG. The reflection light from this tilted fiber Bragg grating includes two parts: the reflected Bragg mode and the cladding modes. The cladding modes were coupled back into the core mode as a function of the multimode fiber. The power of the cladding modes is sensitive to vibration, so the external vibration measurement can be obtained through the cladding mode average output power. Experiment results show that the root mean square (RMS of the detection error of the average power was 0.01 μW within the temperature range from 20 to 70°C, so it is proved to be temperature independent; its frequency response has been tested to 1 KHz.

  16. Development of tilted fibre Bragg gratings using highly coherent 255 nm radiation

    Indian Academy of Sciences (India)

    O Prakash; J Kumar; R Mahakud; U Kumbhkar; S V Nakhe; S K Dixit

    2014-02-01

    This paper reports the study on development of tilted fibre Bragg gratings using highly coherent 255 nm radiation, obtained from the second harmonic generation (SHG) of copper vapour laser (CVL). The transmission and reflection spectra of the tilted fibre Bragg gratings (TFBG) were studied for the tilt angles of 0° (normal FBG), 1°, 3° and 4° between the fibre axis and the interference fringe plane. It was observed that as the angle of fibre axis and phase mask increased, the main Bragg peak shifted towards the higher wavelength and transmission dip decreased. The transmission dip of the cladding mode first increased and then decreased after reaching a maximum with the increase in the tilt angle.

  17. Embossed Bragg Gratings Based on Organically Modified Silane Waveguides in InP.

    Science.gov (United States)

    Liu, J; Lam, Y L; Chan, Y C; Zhou, Y; Ooi, B S; Tan, G; Yao, J

    2000-09-20

    Considering the large variety of applications for optical glass waveguide gratings, the effective production method of embossing for micropatterning, and the unique advantages of InP-based materials, we expect that hybridization of embossed optical glass waveguide gratings and InP substrates will inevitably lead to new applications in integrated optics. We present our preliminary results of research toward the development of solgel-derived glass waveguide gratings made by embossing on InP. Theoretically, the dependence of the stop-band FWHM and transmission contrast of the grating filter on the grating length, and the relationship between the Bragg grating's reflective wavelength and the dopant concentration in the solgel waveguide, are obtained. Experimentally, using organically modified silane, we solve the problem of mismatching of SiO(2) and InP, and successfully fabricate an embossed glass grating with a second-order Bragg reflection wavelength of 1580 nm and a FWHM of 0.7 nm fabricated upon a solgel waveguide on an InP substrate. PMID:18350088

  18. Coupled-modetheory for magneto-optical fiber Bragg grating under non-uniform magnetic field

    Institute of Scientific and Technical Information of China (English)

    LIU Fen; WU Bao-jian; LU Xin

    2011-01-01

    According to the perturbation theory,the coupled-mode equations for guided optical waves in the magneto-optical fiber Bragg gratings(MFBGs) under non-uniform magnetic field are derived.The equivalent relation between the magneticallyinduced non-uniform fiber Bragg grating(MnFBG) and the corresponding non-magnetic chirped grating is expressed and verified by the piecewise-uniform MFBG model under linear magnetic field.On the basis of the equivalent relation,the MnFBGs can be effectively investigated by means of simulations.The characteristics of the MnFBGs under three typical magnetic field distributions with application to optical pulse compression are simulated,and the minimal pulse width can be achieved for the same magneto-optical coupling parameter of 2.2 × 103 m-1.

  19. Dynamic gate algorithm for multimode fiber Bragg grating sensor systems

    DEFF Research Database (Denmark)

    Ganziy, Denis; Jespersen, O.; Woyessa, Getinet;

    2015-01-01

    -to-noise ratio and different peak shapes. Our simulations and experiments demonstrate that the DGA method is fast and robust with better stability and accuracy than conventional algorithms. This makes it very attractive for future implementation in sensing systems, especially based on multimode fiber Bragg...

  20. High-sensitivity Cryogenic Temperature Sensors using Pressurized Fiber Bragg Gratings

    Science.gov (United States)

    Wu, Meng-Chou; DeHaven, Stanton L.

    2006-01-01

    Cryogenic temperature sensing was studied using a pressurized fiber Bragg grating (PFBG). The PFBG was obtained by simply applying a small diametric load to a regular fiber Bragg grating (FBG), which was coated with polyimide of a thickness of 11 micrometers. The Bragg wavelength of the PFBG was measured at temperatures from 295 to 4.2 K. A pressure-induced transition occurred at 200 K during the cooling cycle. As a result the temperature sensitivity of the PFBG was found to be nonlinear but reach 24 pm/K below 200 K, more than three times the regular FBG. For the temperature change from 80 K to 10 K, the PFBG has a total Bragg wavelength shift of about 470 pm, 10 times more than the regular FBG. From room temperature to liquid helium temperature the PFBG gives a total wavelength shift of 3.78 nm, compared to the FBG of 1.51 nm. The effect of the coating thickness on the temperature sensitivity of the gratings is also discussed.

  1. Effects of Coating and Diametric Load on Fiber Bragg Gratings as Cryogenic Temperature Sensors

    Science.gov (United States)

    Wu, meng-Chou; Pater, Ruth H.; DeHaven, Stanton L.

    2008-01-01

    Cryogenic temperature sensing was demonstrated using pressurized fiber Bragg gratings (PFBGs) with polymer coating of various thicknesses. The PFBG was obtained by applying a small diametric load to a regular fiber Bragg grating (FBG). The Bragg wavelengths of FBGs and PFBG were measured at temperatures from 295 K to 4.2 K. The temperature sensitivities of the FBGs were increased by the polymer coating. A physical model was developed to relate the Bragg wavelength shifts to the thermal expansion coefficients, Young's moduli, and thicknesses of the coating polymers. When a diametric load of no more than 15 N was applied to a FBG, a pressure-induced transition occurred at 200 K during the cooling cycle. The pressure induced transition yielded PFBG temperature sensitivities three times greater than conventional FBGs for temperatures ranging from 80 to 200 K, and ten times greater than conventional fibers for temperatures below 80 K. PFBGs were found to produce an increased Bragg wavelength shift of 2.2 nm compared to conventional FBGs over the temperature range of 4.2 to 300 K. This effect was independent of coating thickness and attributed to the change of the fiber thermo-optic coefficient.

  2. Single-pulse coherent anti-Stokes Raman spectroscopy via fiber Bragg grating

    Science.gov (United States)

    Oh, Seung Ryeol; Park, Joo Hyun; Kwon, Won Sik; Kim, Jin Hwan; Kim, Kyung-Soo; Lee, Jae Yong; Kim, Soohyun

    2016-03-01

    Fiber Bragg grating is used in a variety of applications. In this study, we suggest compact, cost-effective coherent anti- Stokes Raman spectroscopy which is based on the pulse shaping methods via commercialized fiber Bragg grating. The experiment is performed incorporating a commercialized femtosecond pulse laser system (MICRA, Coherent) with a 100 mm length of 780-HP fiber which is inscribed 50 mm of Bragg grating. The pump laser for coherent anti-Stokes Raman spectroscopy has a bandwidth of 90 nm and central wavelength of 815 nm with a notch shaped at 785 nm. The positive chirped pulse is compensated by chirped mirror set. We compensate almost 14000 fs2 of positive group delay dispersion for the transform-limited pulse at the sample position. The pulse duration was 15 fs with average power of 50 mW, and showed an adequate notch shape. Finally, coherent anti-Stokes Raman signals are observed using a spectrometer (Jobin Yvon Triax320 and TE-cooled Andor Newton EMCCD). We obtained coherent anti-Stokes Raman signal of acetone sample which have Raman peak at the spectral finger-print region. In conclusion, the proposed method is more simple and cost-effective than the methods of previous research which use grating pairs and resonant photonic crystal slab. Furthermore, the proposed method can be used as endoscope application.

  3. Monitoring of ultraviolet pulse rate dependent photomechanical actuation in carbon nanotubes using fiber Bragg gratings

    Energy Technology Data Exchange (ETDEWEB)

    Shivananju, B. N.; Suri, Ashish [Department of Instrumentation and Applied Physics, Indian Institute of Science, Bangalore (India); Asokan, S. [Department of Instrumentation and Applied Physics, Indian Institute of Science, Bangalore (India); Applied Photonics Initiative, Indian Institute of Science, Bangalore (India); Robert Bosch Centre for Cyber Physical Systems, Indian Institute of Science, Bangalore (India); Misra, Abha, E-mail: abha@iap.iisc.ernet.in [Department of Instrumentation and Applied Physics, Indian Institute of Science, Bangalore (India); Applied Photonics Initiative, Indian Institute of Science, Bangalore (India)

    2014-01-06

    In this Letter, we present a non-contact method of controlling and monitoring photomechanical actuation in carbon nanotubes (CNT) by exposing it to ultra-violet radiation at different pulse rates (10 to 200 Hz). This is accomplished by imparting a reversible photo induced strain (5–330 με) on CNT coated fibre Bragg gratings; CNT undergoes an internal reversible structural change due to cyclic photon absorption that leads to the development of mechanical strain, which in turn allows reversible switching of the Bragg wavelength. The results also reveal an interesting pulse rate dependent rise and fall times of photomechanical actuation in CNT.

  4. A high sensitive fiber Bragg grating strain sensor with automatic temperature compensation

    Institute of Scientific and Technical Information of China (English)

    Kuo Li; Zhen'an Zhou

    2009-01-01

    A high sensitive fiber Bragg grating (FBG) strain sensor with automatic temperature compensation is demonstrated. FBG is axially linked with a stick and their free ends are fixed to the measured object. When the measured strain changes, the stick does not change in length, but the FBG does. When the temperature changes, the stick changes in length to pull the FBG to realize temperature compensation. In experiments, 1.45 times strain sensitivity of bare FBG with temperature compensation of less than 0.1 nm Bragg wavelength drift over 100℃ shift is achieved.

  5. Dual Measurements of Pressure and Temperature With Fiber Bragg Grating Sensor

    OpenAIRE

    Tahreer S. Mansour; Fahad M. Abdulhussein

    2015-01-01

    The fiber Bragg grating (FBG) technology has been rapidly applied in the sensing technology field. In this work, uniform FBG was used as pressure sensor based on measuring related Bragg wavelength shift. The pressure was applied directly by air compressor to the sensor and the pressure was ranged from 1 to 6 bar. This sensor also was affected by the external temperature so as a result it could be used as a temperature sensor. This sensor could be used to monitor the pressure of dams. It has b...

  6. Multiplexed Volume Bragg Gratings in Narrowand Broad-band Spectral Systems: Analysis and Application

    Science.gov (United States)

    Ingersoll, Gregory B.

    Volume Bragg gratings (VBGs) are important holographic optical elements in many spectral systems. Using multiple volume gratings, whether multiplexed or arranged sequentially, provides advantages to many types of systems in overall efficiency, dispersion performance, flexibility of design, etc. However, the use of multiple gratings---particularly when the gratings are multiplexed in a single holographic optical element (HOE)---is subject to inter-grating coupling effects that ultimately limit system performance. Analyzing these coupling effects requires a more complex mathematical model than the straightforward analysis of a single volume grating. We present a matrix-based algorithm for determining diffraction efficiencies of significant coupled waves in these multiplexed grating holographic optical elements (HOEs). Several carefully constructed experiments with spectrally multiplexed gratings in dichromated gelatin verify our conclusions. Applications of this theory to broad- and narrow-band systems are explored in detailed simulations. Broadband systems include spectrum splitters for diverse-bandgap photovoltaic (PV) cells. Volume Bragg gratings can serve as effective spectrum splitters, but the inherent dispersion of a VBG can be detrimental given a broad-spectrum input. The performance of a holographic spectrum splitter element can be improved by utilizing multiple volume gratings, each operating in a slightly different spectral band. However, care must be taken to avoid inter-grating coupling effects that limit ultimate performance. We explore broadband multi-grating holographic optical elements (HOEs) in sandwiched arrangements where individual single-grating HOEs are placed in series, and in multiplexed arrangements where multiple gratings are recorded in a single HOE. Particle swarm optimization (PSO) is used to tailor these systems to the solar spectrum taking into account both efficiency and dispersion. Both multiplexed and sandwiched two-grating systems

  7. Metal-coated second-order fibre Bragg gratings produced by infrared femtosecond radiation for dual temperature and strain sensing

    Science.gov (United States)

    Chah, K.; Kinet, D.; Caucheteur, C.

    2016-05-01

    We report highly localized second-order fibre Bragg gratings at 1585 nm inscribed by point-by-point focused infrared femtosecond pulses. A thin gold coating deposited on the fibre outer surface at the grating location allows shielding the cladding mode resonances from the outer medium, so that they remain present in the transmitted amplitude spectrum. The Bragg resonance of the second-order grating is surrounded by high-order cladding mode resonances of the first-order grating. These cladding modes exhibit the same temperature sensitivity as the Bragg resonance (10.6 pm/°C) but high differential strain sensitivity (-0.55 pm/μepsilon versus 1.20 pm/μepsilon for the Bragg mode). Therefore, the conditioning of the matrix inversion as demodulation method is fully satisfied, yielding a new design of fibre sensor able to discriminate between temperature and strain, with an unprecedented sensitivity.

  8. Comparison of recoated fiber Bragg grating sensors under tension on a steel coupon

    Science.gov (United States)

    Rivera, E.; Thomson, D. J.; Mufti, A. A.

    2005-05-01

    One of the key elements in a structural health monitoring system is the sensing element and data acquisition system. One type of fiber optic sensor used to measure strain is the fiber Bragg grating. Bragg gratings are fabricated using different methods. One method involves placing a mask pattern over the optical fiber and projecting UV light through it to change the refractive index of the core. However, before the grating is written into the core of the fibre, the outer fibre coatings must be stripped away either mechanically or chemically. Fibre Bragg gratings are then recoated after the grating has been written to maintain the strength and flexibility of the fibre by protecting the exposed glass from damage. Acrylate and polyimide are two types of recoat material typically used on fibre Bragg grating sensors. This work is a controlled comparison of polyimide and acrylate recoated fibres for Bragg grating strain sensors. The comparison was carried out using a tension test coupon with recoated FBG and electrical strain gauges bonded to its surface. The tension test specimen was made of cold rolled steel and was designed according to ASTM A30-97a standard. The dimensions were chosen such that three fibre optic sensors and a strain gauge can be attached on each side. The load was applied in 40 μɛ steps until the strain reached approximately 200 ´ɛ. The load was then incrementally decreased back to zero. FBG sensors from 2 manufacturers were compared. For the first manufacturer the Acrylate coated sensors required a gauge factor is 0.75 in order for electrical and FBG strain readings to agree. For Polyimide coated sensors, the appropriate gauge factor was very close to the theoretically predicted value of 0.8. Using these gauge factors, the error between the first manufacturers sensor readings and the strain gauges was well within +/-5´ɛ. On the other hand, the second manufacturers sensors did not perform nearly as well. Their readings were substantially lower

  9. Apparatus and Method for Measuring Strain in Bragg Gratings

    Science.gov (United States)

    Froggatt, Mark E. (Inventor)

    1998-01-01

    An apparatus and method for measuring strain of gratings written into an optical fiber is disclosed. Optical radiation is transmitted over a plurality of contiguous predetermined wavelength ranges into a reference optical fiber network and an optical fiber network under test to produce a plurality of reference interference fringes and measurement interference fringes. respectively. The reference and measurement fringes are detected and sampled such that each sampled value of the reference and measurement fringes is associated with a corresponding sample number. The wavelength change of the reference optical fiber, for each sample number, due to the wavelength of the optical radiation is determined. Each determined wavelength change is matched with a corresponding sampled value of each measurement fringe. Each sampled measurement fringe of each wavelength sweep is transformed into a spatial domain waveform. The spatial domain waveforms are summed to form a summation spatial domain waveform that is used to determine location of each grating with respect to a reference reflector. A portion of each spatial domain waveform that corresponds to a particular grating is determined and transformed into a corresponding frequency spectrum representation. The strain on the grating at each wavelength of optical radiation is determined by determining the difference between the current wavelength and an earlier, zero-strain wavelength measurement.

  10. Rainbow trapping based on long-range plasmonic Bragg gratings at telecom frequencies

    International Nuclear Information System (INIS)

    The group velocity of long-range surface plasmon polaritons (LRSPPs) in a wide frequency bandwidth at infrared frequencies is significantly reduced by dielectric gratings of graded thickness on both sides of a thin metal film. This structure can reduce the propagation loss of slow surface plasmons in “rainbow trapping” systems based on plasmonic Bragg gratings. Compared with dielectric gratings of graded thickness on a single side of a metal film, the proposed structure is able to guide slow light with a much longer propagation distance for the same group index factor. Finite-difference time-domain simulation results show that slow LRSPPs with the group velocity of c/14.5 and the propagation distance of 10.4 μm are achieved in dielectric gratings of uniform thickness on both sides of a thin metal film at 1.62 μm

  11. Analysis of transmission mode of a matched fiber Bragg grating interrogation scheme.

    Science.gov (United States)

    Wade, Scott A; Attard, Daniel P; Stoddart, Paul R

    2010-08-20

    A detailed investigation has been undertaken into the transmission mode of the matched fiber Bragg grating interrogation scheme with respect to its use in optical fiber sensor applications. Analytical and numerical models of the scheme have been developed. Experimental studies presented include the effect of the spectral characteristics of the gratings on system performance, results of strain and compression calibrations, a scheme to correct for intensity fluctuations, and the correction of temperature-induced shifts by collocating sensor and reference gratings. The results are in good agreement with a simplified model of the transmission mode. The analysis provides quantitative relationships between key sensor design parameters, such as sensitivity and measurement range as a function of grating bandwidth. PMID:20733619

  12. Continuous anneal method for characterizing the thermal stability of ultraviolet Bragg gratings

    DEFF Research Database (Denmark)

    Rathje, Jacob; Kristensen, Martin; Pedersen, Jens Engholm

    2000-01-01

    We present a new method for determining the long-term stability of UV-induced fiber Bragg gratings. We use a continuous temperature ramp method in which systematic variation of the ramp speed probes both the short- and long-term stability. Results are obtained both for gratings written in D2 loaded...... fiber grating we resolve two separate energy distributions, suggesting that two different defects are involved. The experiments show that complicated decays originating from various energy distributions can be analyzed with this continuous isochronal anneal method. The results have both practical...... and nonloaded fibers. The results for the nonloaded fibers are in good agreement with those previously obtained. Precise predictions of the grating decay were made. We find good agreement with a broad trap energy distribution where the defects with the lowest energy decay first. For the D2 loaded...

  13. Terahertz bandwidth photonic Hilbert transformers based on synthesized planar Bragg grating fabrication.

    Science.gov (United States)

    Sima, Chaotan; Gates, J C; Holmes, C; Mennea, P L; Zervas, M N; Smith, P G R

    2013-09-01

    Terahertz bandwidth photonic Hilbert transformers are proposed and experimentally demonstrated. The integrated device is fabricated via a direct UV grating writing technique in a silica-on-silicon platform. The photonic Hilbert transformer operates at bandwidths of up to 2 THz (~16 nm) in the telecom band, a 10-fold greater bandwidth than any previously reported experimental approaches. Achieving this performance requires detailed knowledge of the system transfer function of the direct UV grating writing technique; this allows improved linearity and yields terahertz bandwidth Bragg gratings with improved spectral quality. By incorporating a flat-top reflector and Hilbert grating with a waveguide coupler, an ultrawideband all-optical single-sideband filter is demonstrated. PMID:23988981

  14. Development of Bragg Gratings as Shear Stress Monitors in Aerodynamic >Facilities

    Science.gov (United States)

    Parmar, Devandra S.

    1998-04-01

    Two Bragg gratings centered at 1289.565 nm and 1299.432 nm were co-written in the core of a 9/125 telecommunications fiber doped with 10 weight percent germanium. The fiber was mounted in a 126 deep groove, with a 127 diameter semicircular bottom, etched in a flat metal plate used as the test model. A 1 thick epoxy layer bonded the fiber to the metal plate. A thermocouple was also attached to the metal plate in the vicinity of the Bragg fiber. The metal plate was next mounted in the test section of a subsonic wind tunnel. A skin friction balance was also mounted on the wall of the test section. As the wind speed in the tunnel was increased from 0 to 90 m/sec, reflected Bragg wavelengths and the fiber temperatures were recorded continuously. At a windspeed of 38.89 m/sec, the tunnel flow experienced a fan-induced turbulence registered by the skin friction balance as well as the Bragg signals. This commonality of the turbulence signal registration provided a unique calibration datum for the modulus of rigidity of the Bragg fiber assembly. This value of h has been used to calculate the values of shear stress at various tunnel speeds on the basis of Bragg wavelength changes at those speeds.

  15. Highly tunable Terahertz filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides

    OpenAIRE

    Kangwen Li; Xunpeng Ma; Zuyin Zhang; Lina Wang; Haifeng Hu; Yun Xu; Guofeng Song

    2013-01-01

    A highly tunable terahertz (THz) filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides is proposed and demonstrated numerically by means of the Finite Element Method. The results reveal that a sharp peak with high Q-value presents in the band gap of Bragg grating waveguide with a defect, and the position of the sharp peak can be modified greatly by changing the intensity of the transverse magnetic field applied to the device. Compared to the situ...

  16. Dual wavelength erbium-doped fiber laser with a lateral pressure-tuned Hi-Bi fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Lingyun Xiong(熊凌云); Guiyun Kai(开桂云); Lei Sun(孙磊); Xinhuan Feng(冯新焕); Chunxian Xiao(肖纯贤); Yange Liu(刘艳格); Shuzhong Yuan(袁树忠); Xiaoyi Dong(董孝义)

    2004-01-01

    Tunable dual wavelength erbium-doped fiber laser (EDFL) with stable oscillation at room temperature is proposed and demonstrated. This laser utilizes a Bragg grating fabricated in a high birefringence fiber as the wavelength-selective component, and then achieves the stable dual wavelength oscillation by introducing the polarization hole burning effect. Furthermore, by applying lateral strain upon the fiber Bragg grating (FBG), the space of the laser dual wavelengths can be tuned continuously.

  17. Gamma radiation-induced blue shift of resonance peaks of Bragg gratings in pure silica fibres

    Science.gov (United States)

    Faustov, A. V.; Gusarov, A. I.; Mégret, P.; Wuilpart, M.; Kinet, D.; Zhukov, A. V.; Novikov, S. G.; Svetukhin, V. V.; Fotiadi, A. A.

    2016-02-01

    We report the first observation of a significant gamma radiation-induced blue shift of the reflection/transmission peak of fibre Bragg gratings inscribed into pure-silica core fibres via multiphoton absorption of femtosecond pulses. At a total dose of ~100 kGy, the shift is ~20 pm. The observed effect is attributable to the ionising radiation-induced decrease in the density of the silica glass when the rate of colour centre formation is slow. We present results of experimental measurements that provide the key parameters of the dynamics of the gratings for remote dosimetry and temperature sensing.

  18. Design and Realization of Uniform Fiber Bragg Grating Used in Dense Wavelength Division Multiplexing Systems

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Relation of optical properties in a uniform fiber Bragg grating(FBG) with its grating parameters and the laser beam engraving conditions is analyzed. The principle and method for designing the uniform FBG used in dense wavelength division multiplexing(DWDM) system is given. By adopting the double exposure technique, with a uniform phase mask and Gaussian laser beam, the uniform FBG used in DWDM system is designed and engraved, whose bandwidth of the main reflection band is about 0.4nm and 0.7nm at -5dB and -25dB respectively.

  19. PMMA mPOF Bragg gratings written in less than 10 min

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Markos, Christos;

    2014-01-01

    Fiber Bragg grating (FBG) writing in PMMA microstructured Polymer Optical Fibers (mPOFs) using the UV Phase Mask technique is a time consuming process requiring about 40 minutes to inscribe a grating in an undoped fiber. Here we demonstrate the FBG inscription with the writing times shorter than 10...... min. By careful alligning and increasing the beam intensity in the core of the fiber, writing times as short as 6 minutes and 50 second were achieved. The FBGs were written in a 125 μm PMMA mPOF having 3-rings of holes, the reflection peaks were centred at 632.6 nm and have a reflectivity as high...

  20. Dynamic strain detection using a fiber Bragg grating sensor array for geotechnical applications

    Science.gov (United States)

    Schmidt-Hattenberger, Cornelia; Naumann, M.; Borm, Gunter

    2003-03-01

    In recent years fiber Bragg gratings have been successfully introduced as sensors for strain, temperature and pressure variations. Their performance and reliability has been proven in many practical applications including strain monitoring in civil engineering and tunneling, downhole monitoring in oil reservoirs and flow assurance monitoring in pipelines. The gratings have great potential to at as true structurally integrated sensor elements. They can be embedded in typical structural or reinforcing elements of civil and geotechnical buildings. Several methods of interrogation schemes are established depending on the desired accuracy and resolution of the measurement. The most important methods are the linear discriminator, the tunable Fbry-Perot filter technique, and several interferometer setups.

  1. Simultaneous Strain and Temperature Measurement Using Single High-duty-cycle Sampled Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A novel and simple fiber grating sensor based on high-duty-cycle sample fiber Bragg grating is proposed and demonstrated experimentally. This type of sensor can measure strain and temperature simultaneously with merits of low cost, high sensitivity and immunity to electro- magnetic interference. The sensor has an accuracy of 20με and 0.8℃ over a strain range of 500~1500με and a temperature range of 5~36℃ under experimental conditions.

  2. Femtosecond direct-writing of low-loss fiber Bragg gratings using a continuous core-scanning technique.

    Science.gov (United States)

    Williams, Robert J; Krämer, Ria G; Nolte, Stefan; Withford, Michael J

    2013-06-01

    We report the inscription of low-loss fiber Bragg gratings using focused femtosecond (fs) pulses and a continuous core-scanning technique. This direct-write technique produces high-fidelity Type I-IR gratings that share the inherent advantages of other direct-write methods, such as the point-by-point (PbP) method, for which the grating period is a free parameter. However, here we demonstrate an order of magnitude improvement in scattering loss compared to PbP gratings, to a level comparable with that of phase-mask-based fs inscription. A first-order grating was inscribed in standard telecommunications fiber with -49 dB transmission at the Bragg wavelength and 0.1 dB broadband scattering loss. Potential application of these gratings to large-mode-area fibers and chirped grating fabrication are highlighted.

  3. Occurrence of Features of Fiber Bragg Grating Spectra Having a Wavelength Corresponding to the Phase Mask Periodicity

    Institute of Scientific and Technical Information of China (English)

    Sui P. Yam; Zourab Brodzeli; Scott A. Wade; Greg W. Baxter; Stephen F. Collins

    2008-01-01

    The use of a phase mask with 536 nm uniform pitch allowed the fabrication of a fiber Bragg grating for use at a Bragg wavelength of 785 nm. Reflection and transmission features at 1552 nm, twice the Bragg wavelength, associated with the phase mask periodicity were observed. However, when phase mask orders other than ±1 were absent during fabrication the features at 1552 nm were not evident.

  4. Dynamic analysis and temperature measurements of concrete cantilever beam using fibre Bragg gratings

    Science.gov (United States)

    da Silva, Jean Carlos Cardozo; Martelli, Cicero; Kalinowski, Hypolito José; Penner, Elisabeth; Canning, John; Groothoff, Nathaniel

    2007-01-01

    We analyzed the action of fire, causing degradation in a concrete cantilever beam using dynamic testing. The structure was fitted with two fibre Bragg gratings (FBG) sensors. One of them measured vibration and the other measured the temperature inside of the cantilever beam, while the beam was exposed to fire. A high-temperature probe based on a simple packaging system, which isolates the sensing FBG from any mechanical action, was developed. A low-cost fibre Bragg grating interrogation system, including easy assembly and maintenance, was used for the measurements. The temperature in the cantilever beam increased until 150 °C and a reduction in the strength of concrete was observed through modal analysis. Results reveal a considerable reduction in strength occurs even with exposures to moderate temperatures (less than 90 °C).

  5. Liquid Resin Infusion process monitoring with embedded superimposed long period and short period Bragg grating sensor.

    Directory of Open Access Journals (Sweden)

    Robert L.

    2010-06-01

    Full Text Available We propose here the monitoring of the Liquid Resin Infusion (LRI process for using a superimposed long period (LPG and short period (FBG Bragg grating sensor. Monitoring of such a process is usually made measuring simultaneously temperature and strain by the use of an electro-optical device (FBG-Thermocouple. It has been shown that an applied solicitation is measured by a wavelength shift with a different sensitivity for LPG and FBG; thus strain and temperature influences can be determined separately by measuring corresponding wavelength shifts. The reported configuration is based on the use of these two Bragg gratings types written in the same fibre section, which allows us to discriminate the contributions of the temperature and strain. The sensor is embedded in a composite specimen manufactured by LRI process for monitoring in real time and simultaneously the applied temperature and strain.

  6. Covalent Attachment of Carbohydrate Derivatives to an Evanescent Wave Fiber Bragg Grating Biosensor

    Directory of Open Access Journals (Sweden)

    Christopher J. Stanford

    2009-01-01

    Full Text Available A carbohydrate-based biosensor was prepared by functionalization of the surface of an etched fiber Bragg grating with a glucopyranosyl-siloxane conjugate. Functionalization of the surface with the conjugate resulted in a Bragg grating shift of 24 pm. This shift in the refractive index is consistent with a theoretical shift calculated assuming monolayer coverage of the glucose conjugate on the sensor. The resulting functionalized fiber was shown to interact selectively with concanavalin A (Con A, a glucose binding protein (lectin. Exposure of the glucose-functionalized fiber to peanut agglutinin, a galactosebinding lectin, did not result in a change of the refractive index corresponding to a binding event.

  7. Proof of Concept of Impact Detection in Composites Using Fiber Bragg Grating Arrays

    Directory of Open Access Journals (Sweden)

    Ander Montero

    2013-09-01

    Full Text Available Impact detection in aeronautical structures allows predicting their future reliability and performance. An impact can produce microscopic fissures that could evolve into fractures or even the total collapse of the structure, so it is important to know the location and severity of each impact. For this purpose, optical fibers with Bragg gratings are used to analyze each impact and the vibrations generated by them. In this paper it is proven that optical fibers with Bragg gratings can be used to detect impacts, and also that a high-frequency interrogator is necessary to collect valuable information about the impacts. The use of two interrogators constitutes the main novelty of this paper.

  8. Sensitivity of Bragg gratings in birefringent optical fiber to transverse compression between conforming materials.

    Science.gov (United States)

    Dennison, Christopher R; Wild, Peter M

    2010-04-20

    A theoretical and experimental investigation of the transverse load sensitivity of Bragg gratings in birefringent fibers to conforming contact is presented. A plane elasticity model is used to predict the contact dimensions between a conforming material and optical fiber and the principal stresses, indicating birefringence, created as a result of this contact. The transverse load sensitivity of commercially available birefringent fiber is experimentally measured for two cases of conforming contact. Theoretical and experimental results show that birefringent optical fiber can be used to make modulus-independent measurements of contact load. Therefore, Bragg gratings could be applied to conforming contact load measurements while avoiding some of the complications associated with existing contact sensors: specifically, the necessity to precalibrate by using materials with mechanical properties identical to those found in situ.

  9. Novel simulation method for fiber Bragg grating under inhomogeneous strain fields

    Institute of Scientific and Technical Information of China (English)

    YUN Bin-feng; LU Chang-gui; WANG Zhu-yuan; WANG Yi-ping; CUI Yi-ping

    2005-01-01

    The spectra of fiber Bragg grating (FBG) in inhomogeneous strain fields are distorted due to its inhomogeneity of both the periods and the effective refractive index. The couple mode theory and the Runge-Kutta method can be employed for exact simulation of the spectrum of Bragg grating in such field, but the convergence speed is slow. On the other hand, although the transfer matrix method could be used with higher convergence speed, the precision is poor because of the neglect of the grads of strain change. By improving the FBG equivalent period, a novel simulation method based on a modified transfer matrix method is proposed, which has the advantage of quick-convergence as well as good accuracy.

  10. Photonic crystal fibre Brillouin laser based on Bragg grating Fabry-Perot cavity

    Institute of Scientific and Technical Information of China (English)

    Geng Dan; Yang Dong-Xiao; Shen Guo-Feng; Zhang Xian-Min

    2008-01-01

    A photonic crystal fibre Brillouin laser based on fibre Bragg grating Fabry-Perot cavity is presented. A highly nonlinear photonic crystal fibre 25 m in length is used as Brillouin gain medium and fibre Bragg grating Fabry-Perot cavity is chosen in order to enhance the laser conversion efficiency and suppress the higher-order Stokes waves. The laser reaches the threshold at input power of 35 mW, and the experimental laser conversion efficiency achieves 18% of the input power of 140 mW and does not show higher-order Stokes waves. A photonic crystal fibre BriUouin laser withshorter fibre length and lower threshold is experimentally realized.

  11. Spectral interference fringes in chirped large-mode-area fiber Bragg gratings

    Science.gov (United States)

    Poozesh, Reza; Madanipour, Khosro; Vatani, Vahid

    2016-09-01

    Spectral interference fringes were experimentally observed in chirped large mode area fiber Bragg grating (CFBG) in the overlapping region of the reflected spectrum of fiber modes by a high resolution spectrometer. It was demonstrated that the interference is due to optical path difference of the reflected modes in slight chirped FBGs. By assuming chirped fiber Bragg gratings as a Fabry-Perot (FP) cavity, free spectral range (FSR) of FP was calculated 0.08 nm which is matched with measurement very well. Furthermore, the experiments show that axial tension and temperature changes of the CFBG do not have observable effects on the magnitude of FSR, however coiling of the fiber deceases spectral interference fringe amplitude without sensible effect on FSR magnitude. The results of this work can be utilized in bending sensors.

  12. Strain Sharing Assessment in Woven Fiber Reinforced Concrete Beams Using Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Montanini, Roberto; Recupero, Antonino; De Domenico, Fabrizio; Freni, Fabrizio

    2016-01-01

    Embedded fiber Bragg grating sensors have been extensively used worldwide for health monitoring of smart structures. In civil engineering, they provide a powerful method for monitoring the performance of composite reinforcements used for concrete structure rehabilitation and retrofitting. This paper discusses the problem of investigating the strain transfer mechanism in composite strengthened concrete beams subjected to three-point bending tests. Fiber Bragg grating sensors were embedded both in the concrete tensioned surface and in the woven fiber reinforcement. It has been shown that, if interface decoupling occurs, strain in the concrete can be up to 3.8 times higher than that developed in the reinforcement. A zero friction slipping model was developed which fitted very well the experimental data. PMID:27669251

  13. Strain Sharing Assessment in Woven Fiber Reinforced Concrete Beams Using Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Montanini, Roberto; Recupero, Antonino; De Domenico, Fabrizio; Freni, Fabrizio

    2016-09-22

    Embedded fiber Bragg grating sensors have been extensively used worldwide for health monitoring of smart structures. In civil engineering, they provide a powerful method for monitoring the performance of composite reinforcements used for concrete structure rehabilitation and retrofitting. This paper discusses the problem of investigating the strain transfer mechanism in composite strengthened concrete beams subjected to three-point bending tests. Fiber Bragg grating sensors were embedded both in the concrete tensioned surface and in the woven fiber reinforcement. It has been shown that, if interface decoupling occurs, strain in the concrete can be up to 3.8 times higher than that developed in the reinforcement. A zero friction slipping model was developed which fitted very well the experimental data.

  14. Fiber Bragg grating strain sensors to monitor and study active volcanoes

    Science.gov (United States)

    Sorrentino, Fiodor; Beverini, Nicolò; Carbone, Daniele; Carelli, Giorgio; Francesconi, Francesco; Gambino, Salvo; Giacomelli, Umberto; Grassi, Renzo; Maccioni, Enrico; Morganti, Mauro

    2016-04-01

    Stress and strain changes are among the best indicators of impending volcanic activity. In volcano geodesy, borehole volumetric strain-meters are mostly utilized. However, they are not easy to install and involve high implementation costs. Advancements in opto-electronics have allowed the development of low-cost sensors, reliable, rugged and compact, thus particularly suitable for field application. In the framework of the EC FP7 MED-SUV project, we have developed strain sensors based on the fiber Bragg grating (FBG) technology. In comparison with previous implementation of the FBG technology to study rock deformations, we have designed a system that is expected to offer a significantly higher resolution and accuracy in static measurements and a smooth dynamic response up to 100 Hz, implying the possibility to observe seismic waves. The system performances are tailored to suit the requirements of volcano monitoring, with special attention to power consumption and to the trade-off between performance and cost. Preliminary field campaigns were carried out on Mt. Etna (Italy) using a prototypal single-axis FBG strain sensor, to check the system performances in out-of-the-lab conditions and in the harsh volcanic environment (lack of mains electricity for power, strong diurnal temperature changes, strong wind, erosive ash, snow and ice during the winter time). We also designed and built a FBG strain sensor featuring a multi-axial configuration which was tested and calibrated in the laboratory. This instrument is suitable for borehole installation and will be tested on Etna soon.

  15. Fiber Bragg Grating-Based Performance Monitoring of Piles Fiber in a Geotechnical Centrifugal Model Test

    Directory of Open Access Journals (Sweden)

    Xiaolin Weng

    2014-01-01

    Full Text Available In centrifugal tests, conventional sensors can hardly capture the performance of reinforcement in small-scale models. However, recent advances in fiber optic sensing technologies enable the accurate and reliable monitoring of strain and temperature in laboratory geotechnical tests. This paper outlines a centrifugal model test, performed using a 60 g ton geocentrifuge, to investigate the performance of pipe piles used to reinforce the loess foundation below a widened embankment. Prior to the test, quasidistributed fiber Bragg grating (FBG strain sensors were attached to the surface of the pipe piles to measure the lateral friction resistance in real time. Via the centrifuge actuator, the driving of pipe piles was simulated. During testing, the variations of skin friction distribution along the pipe piles were measured automatically using an optical fiber interrogator. This paper represents the presentation and detailed analysis of monitoring results. Herein, we verify the reliability of the fiber optic sensors in monitoring the model piles without affecting the integrity of the centrifugal model. This paper, furthermore, shows that lateral friction resistance developed in stages with the pipe piles being pressed in and that this sometimes may become negative.

  16. Characterizing Fiber Bragg Grating Index Profiles to Improve the Writing Process

    DEFF Research Database (Denmark)

    Espejo, M.J.; Svalgaard, Mikael; Dyer, S.D.

    2006-01-01

    We demonstrate an accurate method for identifying both systematic and random errors in a fiber Bragg grating (FBG) writing system and show its application to calibration of the writing process. We first measure the FBG impulse response using low-coherence interferometry, and then we calculate......-beam dithered phase mask FBG writing system. We demonstrate the ability to identify errors in the writing process that would not likely be found from a measurement of the FBG reflection spectrum alone....

  17. Measurement Model for the Maximum Strain in Beam Structures Using Multiplexed Fiber Bragg Grating Sensors

    OpenAIRE

    Se Woon Choi; Jihoon Lee; Bo Hwan Oh; Hyo Seon Park

    2013-01-01

    This study develops a strain measurement model for beam structures subjected to multiloading conditions by defining the strain-shape function and participation factors to overcome the limitations of strain measurements using fiber Bragg grating (FBG) strain sensors. Using the proposed model, the maximum strain in a beam is obtained by the sum of the strains caused by the different loadings acting separately. In this paper, the strain-shape functions for various loading and support conditions ...

  18. Inverse-Gaussian-Apodized Fiber Bragg Grating for Dual Wavelength Lasing

    CERN Document Server

    Lin, Bo; Tjin, Swee Chuan; Tang, Dingyuan; Hao, Jianzhong; Tay, Chia Meng; Liang, Sheng

    2010-01-01

    A fiber Bragg grating (FBG) with an inverse-Gaussian apodization function is proposed and fabricated. It is shown that such a FBG possesses easily controllable dual-wavelength narrow transmission peaks. Incorporating such a FBG filter in a fiber laser with a linear cavity, stable dual-wavelength emission with 0.146 nm wavelength spacing is obtained. It provides a simple and low cost approach of achieving the dual-wavelength fiber laser operation.

  19. 100 GHz electrically tunable planar Bragg grating via nematic liquid crystal overlay towards reconfigurable WDM networks

    OpenAIRE

    Adikan, Faisal Rafiq Mahamd; Gates, James C.; Major, Huw E.; Gawith, Corin B.E.; Smith, Peter G. R.; Dyadyusha, Andriy; Kaczmarek, Malgosia; Sparrow, Ian J.G.

    2007-01-01

    Novel liquid crystal-based integrated optical devices with >140GHz electrical tuning are presented for application towards reconfigurable wavelength division multiplexing (WDM) networks. Initial results with Bragg wavelength tuning covering five 25GHz WDM channel spacing have been achieved with 170V (peak-to-peak) sinusoidal voltages applied across electro-patterned ITO-covered glass electrodes placed 60?m apart. These prototype devices were fabricated using direct UV grating writing, with an...

  20. Time division multiplexing of 106 weak fiber Bragg gratings using a ring cavity configuration

    Science.gov (United States)

    Wang, Zhi; Wen, Hongqiao; Luo, Zhihui; Dai, Yutang

    2016-06-01

    A time division multiplexing of 106 weak fibers Bragg gratings (FBGs) based on a ring resonant-cavity is demonstrated. A semiconductor optical amplifier is connected in the cavity to function as an amplifier as well as a switch. The 106 weak FBGs are written along a SMF-28 fiber in serial with peak reflectivity of about -30 dB and equal separations of 5 m. The crosstalk and spectral distortion are investigated through both theoretical analysis and experiments.

  1. Post-Impact Fatigue Damage Monitoring Using Fiber Bragg Grating Sensors

    OpenAIRE

    Chow-Shing Shin; Shien-Kuei Liaw; Shi-Wei Yang

    2014-01-01

    It has been shown that impact damage to composite materials can be revealed by embedded Fiber Bragg Gratings (FBG) as a broadening and splitting of the latter’s characteristic narrow peak reflected spectrum. The current work further subjected the impact damaged composite to cyclic loading and found that the FBG spectrum gradually submerged into a rise of background intensity as internal damages progressed. By skipping the impact, directing the impact to positions away from the FBG and examin...

  2. Channel Spectral Separation Narrowing for Spectral Beam Combining by Apodisation of the Reflecting Volume Bragg Grating

    OpenAIRE

    Shen Benjian; Tan Jichun; Guangwei Zheng; Yanlan He

    2011-01-01

    The sidelobe in diffraction efficiency of reflecting volume Bragg grating (RVBG) limits the wavelength channel spectral separation, which determines the combining power output in spectral beam combining (SBC) systems. A novel SBC system based on the apodised RVBG has been proposed to suppress the sidelobe. Several apodised RVBGs have been compared and the optimal apodised RVBG is obtained by using the chain-matrix approach. Numerical results show that the sidelobe could be suppressed excellen...

  3. Railway track component condition monitoring using optical fibre Bragg grating sensors

    International Nuclear Information System (INIS)

    The use of optical fibre Bragg grating (FBG) strain sensors to monitor the condition of safety critical rail components is investigated. Fishplates, switchblades and stretcher bars on the Stagecoach Supertram tramway in Sheffield in the UK have been instrumented with arrays of FBG sensors. The dynamic strain signatures induced by the passage of a tram over the instrumented components have been analysed to identify features indicative of changes in the condition of the components. (paper)

  4. Railway track component condition monitoring using optical fibre Bragg grating sensors

    Science.gov (United States)

    Buggy, S. J.; James, S. W.; Staines, S.; Carroll, R.; Kitson, P.; Farrington, D.; Drewett, L.; Jaiswal, J.; Tatam, R. P.

    2016-05-01

    The use of optical fibre Bragg grating (FBG) strain sensors to monitor the condition of safety critical rail components is investigated. Fishplates, switchblades and stretcher bars on the Stagecoach Supertram tramway in Sheffield in the UK have been instrumented with arrays of FBG sensors. The dynamic strain signatures induced by the passage of a tram over the instrumented components have been analysed to identify features indicative of changes in the condition of the components.

  5. 3D printed sensing patches with embedded polymer optical fibre Bragg gratings

    Science.gov (United States)

    Zubel, Michal G.; Sugden, Kate; Saez-Rodriguez, D.; Nielsen, K.; Bang, O.

    2016-05-01

    The first demonstration of a polymer optical fibre Bragg grating (POFBG) embedded in a 3-D printed structure is reported. Its cyclic strain performance and temperature characteristics are examined and discussed. The sensing patch has a repeatable strain sensitivity of 0.38 pm/μepsilon. Its temperature behaviour is unstable, with temperature sensitivity values varying between 30-40 pm/°C.

  6. Fiber Bragg Gratings, IT Techniques and Strain Gauge Validation for Strain Calculation on Aged Metal Specimens

    OpenAIRE

    Ander Montero; Idurre Saez de Ocariz; Ion Lopez; Pablo Venegas; Javier Gomez; Joseba Zubia

    2011-01-01

    This paper studies the feasibility of calculating strains in aged F114 steel specimens with Fiber Bragg Grating (FBG) sensors and infrared thermography (IT) techniques. Two specimens have been conditioned under extreme temperature and relative humidity conditions making comparative tests of stress before and after aging using different adhesives. Moreover, a comparison has been made with IT tecniques and conventional methods for calculating stresses in F114 steel. Implementation of Structural...

  7. Field Deployable Fiber Bragg Grating Strain Patch for Long-Term Stable Health Monitoring Applications

    OpenAIRE

    Gerhard Kalinka; Wolfgang Habel; Nadine Kusche; Vivien Schukar

    2013-01-01

    A fiber Bragg grating (FBG) strain patch specially adapted for long-term and high-strain applications has been developed and characterized. The design concept for the patch is based on a glass-fiber reinforced plastic (gfrp) carrier material. The developed concept for the FBG integration into the carrier material was derived from reliable integration procedure of FBG sensors into composite structures. The patches’ temperature sensitivity, strain gauge factor, fiber–matrix ...

  8. Structural monitoring system with fiber Bragg grating sensors: Implementation and software solution

    CERN Document Server

    Fedorov, Aleksey; Makhrov, Ilya; Pozhar, Nikolay; Anufriev, Maxim; Pnev, Alexey; Karasik, Valeriy

    2014-01-01

    We present a structural health monitoring system for nondestructive testing of composite materials based on the fiber Bragg grating sensors and specialized software solution. Developed structural monitoring system has potential applications for preliminary tests of novel composite materials as well as real-time structural health monitoring of industrial objects. The software solution realizes control for the system, data processing and alert of an operator.

  9. Reconstruction of strain distribution in fiber Bragg grat-ings with differential evolution algorithm

    Institute of Scientific and Technical Information of China (English)

    WEN Xiao-yan; YU Qoan

    2008-01-01

    Differential evolution algorithm is used to solve the inverse problem of strain distribution in tibet Bragg grating (FBG).Linear and nonlinear strain profiles are reconstructed based on the reflection spectra. An approximate solution could beobtained within only 50 rounds of evolutions. Numerical examples show good agreements between target strain profilesand reconstructed ones. Online performance analysis illuminates the efficiency and practicality of differential evolutionalgorithm in solving the inverse problem of FBG.

  10. A Fiber-Optical Intrusion Alarm System Based on Quasi-Distributed Fiber Bragg Grating Sensors

    Institute of Scientific and Technical Information of China (English)

    Qi Jiang; Yun-Jiang Rao; De-Hong Zeng

    2008-01-01

    A fiber-optical intrusion alarm system based on quasi-distributed fiber Bragg grating (FBG) sensors is demonstrated in this paper. The algorithms of empirical mode decomposition (EMD) and wavelet packet characteristic entropy are adopted to determine the intrusion location. The intrusion alarm software based on the Labview is developed, and it is also proved by the experiments. The results show that such a fiber-optical intrusion alarm system can offer the automatic intrusion alarm in real-time.

  11. Sensitivity of contact-free fiber Bragg grating sensor to ultrasonic Lamb wave

    Science.gov (United States)

    Wee, Junghyun; Hackney, Drew; Peters, Kara; Wells, Brian; Bradford, Philip

    2016-04-01

    Networks of fiber Bragg grating (FBG) sensors can serve as structural health monitoring (SHM) systems for large-scale structures based on the collection of ultrasonic waves. The demodulation of structural Lamb waves requires a high signal-to-noise ratio because Lamb waves have a low amplitude. This paper investigates the signal transfer between Lamb waves propagating in an aluminum plate collected by an optical fiber containing a FBG. The fiber is bonded to the plate at locations away from the FBG. The Lamb waves are converted into longitudinal and flexural traveling waves propagating along the optical fiber, which are then transmitted to the Bragg grating. The signal wave amplitude is measured for different distances between the bond location and the Bragg grating. Bonding the optical fiber away from the FBG location and closer to the signal source produces a significant increase in signal amplitude, here measured to be 5.1 times that of bonding the Bragg grating itself. The arrival time of the different measured wave coupling paths are also calculated theoretically, verifying the source of the measured signals. The effect of the bond length to Lamb wavelength ratio is investigated, showing a peak response as the bond length is reduced compared to the wavelength. This study demonstrates that coupling Lamb waves into guided traveling waves in an optical fiber away from the FBG increases the signal-to-noise ratio of Lamb wave detection, as compared to direct transfer of the Lamb wave to the optical fiber at the location of the FBG.

  12. High-strain fiber bragg gratings for structural fatigue testing of military aircraft

    Science.gov (United States)

    Davis, Claire; Tejedor, Silvia; Grabovac, Ivan; Kopczyk, James; Nuyens, Travis

    2012-09-01

    This paper reports on an experimental program of work which investigates the reliability, durability, and packaging of fiber Bragg gratings (FBGs) for application as distributed strain sensors during structural fatigue testing of military platforms. The influence of the FBG fabrication process on sensor reliability is investigated. In addition, methodologies for broad-area packaging and surface-mounting of FBG sensing arrays to defense platforms are developed and tested.

  13. Photonic Bloch oscillations and Wannier-Stark ladders in exponentially chirped Bragg gratings.

    Science.gov (United States)

    Wilkinson, P B

    2002-05-01

    The formation of photonic Bloch oscillations and Wannier-Stark ladders is demonstrated in an exponentially chirped one-dimensional Bragg grating. The photonic Bloch oscillations are investigated using Hamiltonian optics, and direct analogies are made with electron dynamics in periodic potentials. The results of transfer matrix calculations are presented, which show the existence of a photonic Wannier-Stark ladder that should be detectable in experiments.

  14. Fiber optic Bragg grating sensor network installed in a concrete road bridge

    Science.gov (United States)

    Maaskant, Robert; Alavie, A. Tino; Measures, Raymond M.; Ohn, Myo M.; Karr, Shawn E.; Glennie, Derek J.; Wade, C.; Tadros, Gamil; Rizkalla, Sami

    1994-05-01

    The installation of a fiber optic Bragg grating strain sensor network in a new road bridge is described. These sensors are attached to prestressing tendons embedded in prefabricated concrete girders. Three types of prestressing tendons are being monitored: conventional steel strand and two types of carbon fibers reinforced plastic tendons. Sensor durability issues are reviewed and the installation is described. Initial measurements indicate that the sensors are operational and provide some early comparison of tendon performance.

  15. Compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits

    Science.gov (United States)

    Hey Tow, Kenny; Llera, Miguel; Le Floch, Sébastien; Salvadé, Yves; Thévenaz, Luc

    2016-05-01

    In this communication, a novel compact fibre Bragg grating-based thermometer for on-line temperature monitoring of drill bits is reported. Our proposed technique can potentially be used to optimize any drilling process, requiring the use of small drill bits, through direct temperature measurement at the drill bit instead of relying on indirect parameters (speed of rotation, applied force) in order to avoid an overheating as it is currently done nowadays.

  16. Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

    Institute of Scientific and Technical Information of China (English)

    Bao-Jian Wu; Ying Yang; Kun Qiu

    2008-01-01

    Magneto-optic fiber Bragg gratings (MFBG) based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/(kA/m) is predicted.

  17. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    OpenAIRE

    Antonio C. Bruno; Clara J. Pacheco

    2013-01-01

    A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber...

  18. Experimental Study on Friction in Ferrules during Compression Tuning of Fiber Bragg Grating

    Institute of Scientific and Technical Information of China (English)

    Ling Zhao; Jianxin Geng; Lin Li; Zujie Fang

    2003-01-01

    The effect of friction in ferules on compression tuning characteristics of fiber Bragg gratings (FBG) was observed and analyzed in this paper. It was demonstrated that the friction would make a non-uniform strain in the FBG and degradations of its reflection spectrum. To avoid the effect, some measures have been applied. Near 9 nm tuning range can be obtained with good spectral performance.

  19. Monitoring damage development in composite repairs using chirped fibre Bragg grating sensors.

    OpenAIRE

    Rito, Rodolfo N.L.

    2015-01-01

    Composite repairs are often used for damaged structures in order to recover the mechanical properties of the original structure. During service, there is the possibility that damage will occur in the repaired region and hence it would be useful to be able to monitor such repairs. This research investigates the use of chirped fibre Bragg grating (CFBG) sensors to monitor the development of fatigue damage initiation and growth in the repaired region of three different repair systems, i.e. glass...

  20. Applicability of a vibration sensor based on the optical fiber Bragg grating in radiation environment

    CERN Document Server

    Fujita, K; Nakazawa, M; Takahashi, H

    2003-01-01

    Fiber Bragg grating (FBG) is a kind of an optical device developing rapidly in these years and it has various excellent characteristics as a sensor. To investigate applicability of FBG as vibration sensor to nuclear plants, measurement systems were developed and tested. As a result, the FBGs could detect vibration even in gamma-ray environment. Moreover, vibration of a component around a cooling system at the YAYOI reactor could be detected successfully with FBG based sensors.

  1. Demonstration of UV-written waveguides, Bragg gratings and cavities at 780 nm, and an original experimental measurement of group delay

    CERN Document Server

    Lepert, Guillaume; Hinds, Ed A; Rogers, Helen; Gates, James C; Smith, Peter G R

    2011-01-01

    We present direct UV-written waveguides and Bragg gratings operating at 780 nm. By combining two gratings into a Fabry-Perot cavity we have devised and implemented a novel and practical method of measuring the group delay of Bragg gratings.

  2. Efficient interpretation algorithm for embedded Bragg gratings for damage detection in composites

    Science.gov (United States)

    Prabhugoud, Mohanraj; Peters, Kara J.

    2003-07-01

    The goal of a structural health monitoring system is to detect, locate, and identify damages in a structure during its lifetime. The concept of structural health monitoring is particularly important for fiber reinforced composites due to the complexity of the possible failure mechanisms. The goal of this work is to simulate the response of optical fiber Bragg grating sensors to multi-component loading for their implementation in structural health monitoring algorithms for composites. A simulation method is presented to determine the effects of axial, bending and shear loading on an embedded optical fiber Bragg grating sensor. The effect of fiber bending on the Bragg grating sensor is experimentally verified by embedding the sensor in a solid cone, clamped at the base and subjected to a point load at the apex. Next, a numerically efficient method to calculate the response of sensors embedded in a unidirectional composite is developed using both finite element analysis and optimal shear-lag theory and taking into account the above effects. The limitations of the optimal shear-lag theory are derived through comparison with the finite element results. The application of this method is demonstrated through a numerical example, simulating the response of sensors embedded in one fiber layer to a transverse crack.

  3. Blood pressure manometer using a twin Bragg grating Fabry-Perot interferometer

    Science.gov (United States)

    van Brakel, Adriaan; Swart, Pieter L.; Chtcherbakov, Anatoli A.; Shlyagin, Mikhail G.

    2005-02-01

    We propose the use of optical fiber Bragg gratings in a non-invasive blood pressure waveform monitor. Bragg gratings can be written in a Fabry-Perot interferometric configuration to yield a method of strain measurement that has both a high resolution and a wide unambiguous range. This fiber Bragg grating Fabry-Perot interferometer (FBGI) can be used as a sensor to detect strain resulting from blood pressure applied to the walls of an artery situated near the patient"s skin. Strain measurements taken on the skin surface, typically over the radial artery at the wrist, are encoded as phase shifts of the FBGI signal. These phase shifts may be obtained by the analytic representation of the interferometer signal in the wavelength domain or by Fourier analysis in the frequency domain. For the proof of concept a realistic physical model was constructed to simulate pressure conditions at the actual sensor location. The operation of the device is demonstrated by measurements of pressure-pulse waveforms obtained in real-time. This sensor was also successfully tested on human patients, and these results are also presented. Since it yields continuous readings of blood pressure non-invasively, further application of the optical manometer may yield an alternative to conventional sphygmomanometry.

  4. Bragg grating inscription in CYTOP polymer optical fibre using a femtosecond laser

    Science.gov (United States)

    Lacraz, A.; Polis, M.; Theodosiou, A.; Koutsides, C.; Kalli, K.

    2015-05-01

    We report on the inscription of fibre Bragg gratings (FBGs) in CYTOP (cyclic transparent optical polymer) optical fibres. A femtosecond laser beam, operating in the visible wavelength range, is focussed into the core of the fibre for direct inscription of FBGs. The fibre is moved under the focussed beam by a nanometre-resolution air-bearing stage for maximal inscription precision. The grating plane dimensions (measured with bright field microscopy) are typically 30μm × 30μm × 1μm (line by line grating) or 10μm×1μm×1μm (point by point grating) and centred in the core of the fibre for optimal grating efficiency. The FBGs have a typical reflectivity of 70%, a bandwidth of 0.25nm and an index change of ~10-4. The FBG operate in the C-band, where CYTOP offers key advantages over poly (methyl methacrylate) optical fibres, having a significantly lower optical loss in the important near infra-red (NIR) optical communications window, with a theoretical loss of ~0.3dB/km at 1550nm. Additionally, CYTOP has a far lower affinity for water absorption and a core mode refractive index that coincides with the aqueous index regime. These properties offer several unique opportunities for polymer optical fibre sensing at NIR wavelengths, such as compatibility with existing optical networks, the potential for optical fibre sensor multiplexing and suitability for bio-sensing. We have investigated the temperature response of the grating: a linear positive shift of ~ +40pm/K has been measured with little difference between the heating and cooling response. The strain response of the FBG has also been studied with a linear shift of ~ +1.3pm/μɛ measured over a few hundreds of μɛ. We also demonstrated compatibility with a commercial Bragg grating demodulator.

  5. Multi-Stress Monitoring System with Fiber-Optic Mandrels and Fiber Bragg Grating Sensors in a Sagnac Loop

    OpenAIRE

    Hyunjin Kim; Umesh Sampath; Minho Song

    2015-01-01

    Fiber Bragg grating sensors are placed in a fiber-optic Sagnac loop to combine the grating temperature sensors and the fiber-optic mandrel acoustic emission sensors in single optical circuit. A wavelength-scanning fiber-optic laser is used as a common light source for both sensors. A fiber-optic attenuator is placed at a specific position in the Sagnac loop in order to separate buried Bragg wavelengths from the Sagnac interferometer output. The Bragg wavelength shifts are measured with scanni...

  6. Optical fiber laser sensor with a cavity of 8.6 Km formed by two fiber Bragg gratings used as mirrors

    CERN Document Server

    May, M; Vázquez, R A; Basurto, M A; Shlyagin, M G; Márquez, I

    2002-01-01

    We report the operation of a fiber laser sensor made by an Erbium Doped Fiber pumped at 980 nm, an 8.67 km passive fiber and two fiber Bragg gratings placed at the ends of the laser cavity. Under normal conditions, the Bragg gratings have different reflection wavelengths and laser emission is not generated. The two Bragg gratings can be placed at the same reflection wavelength when the Bragg grating with the lowest reflective wavelength is strained which can be used as a sensor element. The laser generation thus shows that the Bragg grating is under strain. Furthermore, our configuration give us the possibility for knowing the distance between two Bragg gratings when the laser beating frequency is measured. A measurement precision better than 25 m in 8.67 Km is shown to be feasible. (Author)

  7. Reconfigurable optical-force-drive chirp and delay line in micro- or nanofiber Bragg grating

    Science.gov (United States)

    Luo, Wei; Xu, Fei; Lu, Yan-qing

    2015-05-01

    The emergence of optical micro- or nanofibers (MNFs) with subwavelength diameter, which have ultralight mass and an intense light field, provides an opportunity for developing fiber-based optomechanical systems. In this study we show theoretically an optomechanical effect in silica MNF Bragg gratings (MNFBGs). The light-induced mechanical effect results in continuously distributed strain along the grating and the power-related strain introduces an optically reconfigurable chirp in the grating period. We develop optomechanical coupled-mode equations and analyze theoretically the influence of the optical-force-induced nonlinearity and chirp on the grating performance. Compared with the weak Kerr effect, the optomechanical effect dominates in the properties' evolution of MNFBGs. Significant group-velocity reduction and switching effect have been demonstrated theoretically at medium power level. This kind of optomechanical MNFBG with optically reconfigurable chirp may offer a path toward an all-optical tunable bandwidth of Bragg resonance and may lead to useful applications such as all-optical switching, optically controlled dispersion, and slow or fast light.

  8. Single- and Two-Phase Flow Characterization Using Optical Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Virgínia H.V. Baroncini

    2015-03-01

    Full Text Available Single- and two-phase flow characterization using optical fiber Bragg gratings (FBGs is presented. The sensor unit consists of the optical fiber Bragg grating positioned transversely to the flow and fixed in the pipe walls. The hydrodynamic pressure applied by the liquid or air/liquid flow to the optical fiber induces deformation that can be detected by the FBG. Given that the applied pressure is directly related to the mass flow, it is possible to establish a relationship using the grating resonance wavelength shift to determine the mass flow when the flow velocity is well known. For two phase flows of air and liquid, there is a significant change in the force applied to the fiber that accounts for the very distinct densities of these substances. As a consequence, the optical fiber deformation and the correspondent grating wavelength shift as a function of the flow will be very different for an air bubble or a liquid slug, allowing their detection as they flow through the pipe. A quasi-distributed sensing tool with 18 sensors evenly spread along the pipe is developed and characterized, making possible the characterization of the flow, as well as the tracking of the bubbles over a large section of the test bed. Results show good agreement with standard measurement methods and open up plenty of opportunities to both laboratory measurement tools and field applications.

  9. Tapered and linearly chirped fiber Bragg gratings with co-directional and counter-directional resultant chirps

    Science.gov (United States)

    Osuch, Tomasz

    2016-05-01

    A method of spectral width tailoring of tapered fiber Bragg gratings is theoretically analyzed and experimentally verified. This concept is based on inscription grating structures in which synthesis of chirps comes from both taper profile and a linearly chirped phase mask used for grating inscription. It is shown that under UV exposure and depending on the orientation of the optical fiber taper relative to the variable-pitch phase mask, tapered and linearly chirped fiber Bragg gratings (TCFBG) with resultant co-directional or counter-directional chirps are achieved. Thus, both effects, those of reduction and enhancement of the grating chirp, as well as their influence on the grating spectral response, are presented. In particular, using the above approach TCFBG with significantly narrowed spectral width are shown. Moreover, fused tapered chirped FBG with relatively large waist diameter are shown having broad spectrum, something that prior to now was not attainable using previously developed techniques.

  10. Fast Inverse Nonlinear Fourier Transforms for Fiber Bragg Grating Design and Related Problems

    CERN Document Server

    Wahls, Sander

    2016-01-01

    The problem of constructing a fiber Bragg grating profile numerically such that the reflection coefficient of the grating matches a given specification is considered. The well-known analytic solution to this problem is given by a suitable inverse nonlinear Fourier transform (also known as inverse scattering transform) of the specificed reflection coefficient. Many different algorithms have been proposed to compute this inverse nonlinear Fourier transform numerically. The most efficient ones require $\\mathcal{O}(D^{2})$ floating point operations (flops) to generate $D$ samples of the grating profile. In this paper, two new fast inverse nonlinear Fourier transform algorithms that require only $\\mathcal{O}(D\\log^{2}D)$ flops are proposed. The merits of our algorithms are demonstrated in numerical examples, in which they are compared to a conventional layer peeling method, the Toeplitz inner bordering method and integral layer peeling. One of our two algorithms also extends to the design problem for fiber-assiste...

  11. Narrow Bandwidth 850-nm Fiber Bragg Gratings in Few-Mode Polymer Optical Fibers

    DEFF Research Database (Denmark)

    Stefani, Alessio; Yuan, Wu; Markos, Christos;

    2011-01-01

    We report on the inscription and characterization of narrow bandwidth fiber Bragg gratings (FBGs) with 850-nm resonance wavelength in polymer optical fibers (POFs). We use two fibers: an in-house fabricated microstructured POF (mPOF) with relative hole size of 0.5 and a commercial step-index POF......, which supports six modes at 850 nm. The gratings have been written with the phase-mask technique and a 325-nm HeCd laser. The mPOF grating has a full-width at half-maximum (FWHM) bandwidth of 0.29 nm and the step-index POF has a bandwidth of 0.17 nm. For both fibers, the static tensile strain...

  12. Fiber optic hydrogen sensor based on an etched Bragg grating coated with palladium.

    Science.gov (United States)

    Coelho, L; de Almeida, J M M M; Santos, J L; Viegas, D

    2015-12-10

    A study of a sensor for hydrogen (H2) detection based on fiber Bragg gratings coated with palladium (Pd) with self-temperature compensation is presented. The cladding around the gratings was reduced down to 50 μm diameter by a chemical etching process. One of the gratings was left uncoated, and the other was coated with 150 nm of Pd. It was observed that palladium hydride has unstable behavior in environments with high humidity level. A simple solution to overcome this problem based on a Teflon tape is presented. The sensing device studied was able to respond to H2 concentrations in the range 0%-1% v/v at room temperature and atmospheric pressure, achieving sensitivities larger than 20 pm/% v/v. Considering H2 concentrations in nitrogen up to 1%, the performance of the sensing head was characterized for different thicknesses of Pd coating ranging from 50 to 200 nm. PMID:26836856

  13. Ultra-wide detuning planar Bragg grating fabrication technique based on direct UV grating writing with electro-optic phase modulation.

    Science.gov (United States)

    Sima, C; Gates, J C; Rogers, H L; Mennea, P L; Holmes, C; Zervas, M N; Smith, P G R

    2013-07-01

    A direct UV grating writing technique based on phase-controlled interferometry is proposed and demonstrated in a silica-on-silicon platform, with a wider wavelength detuning range than any previously reported UV writing technology. Electro-optic phase modulation of one beam in the interferometer is used to manipulate the fringe pattern and thus control the parameters of the Bragg gratings and waveguides. Various grating structures with refractive index apodization, phase shifts and index contrasts of up to 0.8 × 10(-3) have been demonstrated. The method offers significant time/energy efficiency as well as simplified optical layout and fabrication process. We have shown Bragg gratings can be made from 1200 nm to 1900 nm exclusively under software control and the maximum peak grating reflectivity only decreases by 3 dBover a 250 nm (~32 THz) bandwidth. PMID:23842361

  14. Sensitivity Enhancement of Strain Sensing Utilizing a Differential Pair of Fiber Bragg Gratings

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-03-01

    Full Text Available In strain measurement applications, the matched fiber Bragg gratings (FBG method is generally used to reduce temperature dependence effects. The FBG parameters have to be designed to meet the requirements by the particular application. The bandwidth and slope of the FBG has to be balanced well, according to the measurement range, accuracy and sensitivity. A sensitivity enhanced strain demodulation method without sacrificing the measurement range for FBG sensing systems is proposed and demonstrated utilizing a pair of reference FBGs. One of the reference FBGs and the sensing FBG have almost the same Bragg wavelength, while the other reference FBGs has a Bragg wavelength offset relative to the sensing FBG. Reflected optical signals from the sensing FBG pass through two reference FBGs, and subtract from each other after the detection. Doubled strain measurement sensitivity is obtained by static rail load experiments compared to the general matched grating approach, and further verified in dynamic load experiments. Experimental results indicate that such a method could be used for real-time rail strain monitoring applications.

  15. Research on pressure tactile sensing technology based on fiber Bragg grating array

    Science.gov (United States)

    Song, Jinxue; Jiang, Qi; Huang, Yuanyang; Li, Yibin; Jia, Yuxi; Rong, Xuewen; Song, Rui; Liu, Hongbin

    2015-09-01

    A pressure tactile sensor based on the fiber Bragg grating (FBG) array is introduced in this paper, and the numerical simulation of its elastic body was implemented by finite element software (ANSYS). On the basis of simulation, fiber Bragg grating strings were implanted in flexible silicone to realize the sensor fabrication process, and a testing system was built. A series of calibration tests were done via the high precision universal press machine. The tactile sensor array perceived external pressure, which is demodulated by the fiber grating demodulation instrument, and three-dimension pictures were programmed to display visually the position and size. At the same time, a dynamic contact experiment of the sensor was conducted for simulating robot encountering other objects in the unknown environment. The experimental results show that the sensor has good linearity, repeatability, and has the good effect of dynamic response, and its pressure sensitivity was 0.03 nm/N. In addition, the sensor also has advantages of anti-electromagnetic interference, good flexibility, simple structure, low cost and so on, which is expected to be used in the wearable artificial skin in the future.

  16. Fiber Bragg Grating Sensor for Fault Detection in Radial and Network Transmission Lines

    Science.gov (United States)

    Moghadas, Amin A.; Shadaram, Mehdi

    2010-01-01

    In this paper, a fiber optic based sensor capable of fault detection in both radial and network overhead transmission power line systems is investigated. Bragg wavelength shift is used to measure the fault current and detect fault in power systems. Magnetic fields generated by currents in the overhead transmission lines cause a strain in magnetostrictive material which is then detected by Fiber Bragg Grating (FBG). The Fiber Bragg interrogator senses the reflected FBG signals, and the Bragg wavelength shift is calculated and the signals are processed. A broadband light source in the control room scans the shift in the reflected signal. Any surge in the magnetic field relates to an increased fault current at a certain location. Also, fault location can be precisely defined with an artificial neural network (ANN) algorithm. This algorithm can be easily coordinated with other protective devices. It is shown that the faults in the overhead transmission line cause a detectable wavelength shift on the reflected signal of FBG and can be used to detect and classify different kind of faults. The proposed method has been extensively tested by simulation and results confirm that the proposed scheme is able to detect different kinds of fault in both radial and network system. PMID:22163416

  17. Fiber Bragg Grating Sensor for Fault Detection in Radial and Network Transmission Lines

    Directory of Open Access Journals (Sweden)

    Mehdi Shadaram

    2010-10-01

    Full Text Available In this paper, a fiber optic based sensor capable of fault detection in both radial and network overhead transmission power line systems is investigated. Bragg wavelength shift is used to measure the fault current and detect fault in power systems. Magnetic fields generated by currents in the overhead transmission lines cause a strain in magnetostrictive material which is then detected by Fiber Bragg Grating (FBG. The Fiber Bragg interrogator senses the reflected FBG signals, and the Bragg wavelength shift is calculated and the signals are processed. A broadband light source in the control room scans the shift in the reflected signal. Any surge in the magnetic field relates to an increased fault current at a certain location. Also, fault location can be precisely defined with an artificial neural network (ANN algorithm. This algorithm can be easily coordinated with other protective devices. It is shown that the faults in the overhead transmission line cause a detectable wavelength shift on the reflected signal of FBG and can be used to detect and classify different kind of faults. The proposed method has been extensively tested by simulation and results confirm that the proposed scheme is able to detect different kinds of fault in both radial and network system.

  18. Dual Measurements of Pressure and Temperature With Fiber Bragg Grating Sensor

    Directory of Open Access Journals (Sweden)

    Tahreer S. Mansour

    2015-06-01

    Full Text Available The fiber Bragg grating (FBG technology has been rapidly applied in the sensing technology field. In this work, uniform FBG was used as pressure sensor based on measuring related Bragg wavelength shift. The pressure was applied directly by air compressor to the sensor and the pressure was ranged from 1 to 6 bar. This sensor also was affected by the external temperature so as a result it could be used as a temperature sensor. This sensor could be used to monitor the pressure of dams. It has been shown from the result that the sensor is very sensitive to the pressure and the sensitivity was (67 pmar and is very sensitive to temperature and the sensitivity was (10pm oC.

  19. Fiber optic relative humidity sensor based on the tilted fiber Bragg grating coated with graphene oxide

    Science.gov (United States)

    Wang, Youqing; Shen, Changyu; Lou, Weimin; Shentu, Fengying; Zhong, Chuan; Dong, Xinyong; Tong, Limin

    2016-07-01

    A fiber optic relative humidity (RH) sensor based on the tilted fiber Bragg grating (TFBG) coated with graphene oxide (GO) film was presented. Amplitudes of the cladding mode resonances of the TFGB varies with the water sorption and desorption processes of the GO film, because of the strong interactions between the excited backward propagating cladding modes and the GO film. By detecting the transmission intensity changes of the cladding mode resonant dips at the wavelength of 1557 nm, the maximum sensitivity of 0.129 dB/%RH with a linear correlation coefficient of 99% under the RH range of 10-80% was obtained. The Bragg mode of TFBG can be used as power or wavelength references, since it is inherently insensitive to RH changes. In addition, the proposed humidity sensor shows a good performance in repeatability and stability.

  20. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    Directory of Open Access Journals (Sweden)

    Antonio C. Bruno

    2013-08-01

    Full Text Available A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber shifting the reflected Bragg wavelength. The measured shift for the optical fiber used was 1.36 nm per Newton. Models were developed to optimize the magnet geometry for a specific sensor standoff distance and for particular corrosion pit depths. The sensor was able to detect corrosion pits on a fuel storage tank bottom with depths in the sub-millimeter range.

  1. Dental composite resins: measuring the polymerization shrinkage using optical fiber Bragg grating sensors

    Science.gov (United States)

    Ottevaere, H.; Tabak, M.; Chah, K.; Mégret, P.; Thienpont, H.

    2012-04-01

    Polymerization shrinkage of dental composite materials is recognized as one of the main reasons for the development of marginal leakage between a tooth and filling material. As an alternative to conventional measurement methods, we propose optical fiber Bragg grating (FBG) based sensors to perform real-time strain and shrinkage measurements during the curing process of dental resin cements. We introduce a fully automated set-up to measure the Bragg wavelength shift of the FBG strain sensors and to accurately monitor the linear strain and shrinkage of dental resins during curing. Three different dental resin materials were studied in this work: matrix-filled BisGMA-based resins, glass ionomers and organic modified ceramics.

  2. Fiber Bragg Grating Sensor System for Monitoring Smart Composite Aerospace Structures

    Science.gov (United States)

    Moslehi, Behzad; Black, Richard J.; Gowayed, Yasser

    2012-01-01

    Lightweight, electromagnetic interference (EMI) immune, fiber-optic, sensor- based structural health monitoring (SHM) will play an increasing role in aerospace structures ranging from aircraft wings to jet engine vanes. Fiber Bragg Grating (FBG) sensors for SHM include advanced signal processing, system and damage identification, and location and quantification algorithms. Potentially, the solution could be developed into an autonomous onboard system to inspect and perform non-destructive evaluation and SHM. A novel method has been developed to massively multiplex FBG sensors, supported by a parallel processing interrogator, which enables high sampling rates combined with highly distributed sensing (up to 96 sensors per system). The interrogation system comprises several subsystems. A broadband optical source subsystem (BOSS) and routing and interface module (RIM) send light from the interrogation system to a composite embedded FBG sensor matrix, which returns measurand-dependent wavelengths back to the interrogation system for measurement with subpicometer resolution. In particular, the returned wavelengths are channeled by the RIM to a photonic signal processing subsystem based on powerful optical chips, then passed through an optoelectronic interface to an analog post-detection electronics subsystem, digital post-detection electronics subsystem, and finally via a data interface to a computer. A range of composite structures has been fabricated with FBGs embedded. Stress tensile, bending, and dynamic strain tests were performed. The experimental work proved that the FBG sensors have a good level of accuracy in measuring the static response of the tested composite coupons (down to submicrostrain levels), the capability to detect and monitor dynamic loads, and the ability to detect defects in composites by a variety of methods including monitoring the decay time under different dynamic loading conditions. In addition to quasi-static and dynamic load monitoring, the

  3. Experimental research on spatial filtering of deformed laser beam by transmitting volume Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Guangwei Zheng; Benjian Shen; Jichun Tan; Yanlan He; Xiao Wang

    2011-01-01

    Using transmitting volume Bragg gratings (TVBG) as a basis, an experiment on one-dimensional spatial filtering of a deformed laser beam is designed. The deformed laser beam results from a He-Ne laser beam modulated by an amplitude modulation plate with a spatial frequency of 7.2 mm-1. Results show that when the central wave vector of the deformed beam satisfies the Bragg law of TVBG, the spatial profile of the -1st forward-diffracted order is similar to that of the undeformed He-Ne laser beam due to the TVBG with a spatial frequency selective bandwidth of less than 5.0 mm-1. The higher frequency components of the deformed beam are filtered out in the optical near field. Thus, the TVBG cleanup of the spatiallydeformed laser beam is realized experimentally.%@@ Using transmitting volume Bragg gratings (TVBG) as a basis, an experiment on one-dimensional spatial filtering of a deformed laser beam is designed.The deformed laser beam results from a He-Ne laser beam modulated by an amplitude modulation plate with a spatial frequency of 7.2 mm-1.Results show that when the central wave vector of the deformed beam satisfies the Bragg law of TVBG, the spatial profile of the -1st forward-diffracted order is similar to that of the undeformed He-Ne laser beam due to the TVBG with a spatial frequency selective bandwidth of less than 5.0 mm-1.The higher frequency components of the deformed beam are filtered out in the optical near field.Thus, the TVBG cleanup of the spatially-deformed laser beam is realized experimentally.

  4. Estimating needle-tissue interaction forces for hollow needles using fiber Bragg grating sensors

    Science.gov (United States)

    Kumar, Saurabh; Shrikanth, V.; Bharadwaj, Amrutur; Asokan, Sundarrajan; Bobji, M. S.

    2016-03-01

    Brachytherapy and neurological procedures can benefit from real-time estimation of needle-tissue interaction forces, specifically for robotic or robot-assisted procedures. Fiber Bragg Grating Sensors provide advantages of very small size and electromagnetic immunity for use in measurement of the forces directly at the needle tip. This has advantages compared to measurements at the needle shaft which require extensive models of the friction between needle and tissues with varying depth. This paper presents the measurement of tip forces for a hollow needle and compensation for bending when encountering regions of varying stiffness in phantoms with multiple layers prepared using Polydimethylsiloxane.

  5. Stability of gap solitons in dual-core Bragg gratings with cubic-quintic nonlinearity

    International Nuclear Information System (INIS)

    We investigate the existence and stability of quiescent gap solitons in a system of two linearly coupled Bragg gratings with cubic-quintic nonlinearity. It is found that the model supports two disjoint families of solitons that fill the entire bandgap. There exist symmetric and asymmetric solitons in each family. Exact analytical solutions of symmetric solitons for both families are found. The stability of solitons is investigated by means of systematic numerical stability analysis. The effect of quintic nonlinearity and coupling coefficient on the stability of solitons and the stability regions are analyzed. (letter)

  6. All-fiber amplifier similariton laser based on a fiber Bragg grating filter.

    Science.gov (United States)

    Olivier, Michel; Gagnon, Mathieu; Duval, Simon; Bernier, Martin; Piché, Michel

    2015-12-01

    This article presents, for the first time to our knowledge, an all-fiber amplifier similariton laser based on a fiber Bragg grating filter. The laser emits 2.9 nJ pulses at a wavelength of 1554 nm with a repetition rate of 31 MHz. The dechirped pulses have a duration of 89 fs. The characteristic features of the pulse profile and spectrum along with the dynamics of the laser are highlighted in representative simulations. These simulations also address the effect of the filter shape and detuning with respect to the gain spectral peak. PMID:26625073

  7. Compact wavelength add-drop multiplexers using Bragg gratings in coupled dielectric-loaded plasmonic waveguides

    CERN Document Server

    Biagi, Giulio; Radko, Ilya P; Rubahn, Horst-Günter; Pedersen, Kjeld; Bozhevolnyi, Sergey I

    2016-01-01

    We report a novel design of a compact wavelength add-drop multiplexer utilizing dielectric-loaded surface plasmon-polariton waveguides (DLSPPWs). The DLSPPW-based configuration exploits routing properties of directional couplers and filtering abilities of Bragg gratings. We present practical realization of a 20-$\\mu$m-long device operating at telecom wavelengths that can reroute optical signals separated by approximately 70 nm in the wavelength band. We characterize the performance of the fabricated structures using scanning near-field optical microscopy as well as leakage-radiation microscopy and support our findings with numerical simulations.

  8. Stainless steel component with compressed fiber Bragg grating for high temperature sensing applications

    Science.gov (United States)

    Jinesh, Mathew; MacPherson, William N.; Hand, Duncan P.; Maier, Robert R. J.

    2016-05-01

    A smart metal component having the potential for high temperature strain sensing capability is reported. The stainless steel (SS316) structure is made by selective laser melting (SLM). A fiber Bragg grating (FBG) is embedded in to a 3D printed U-groove by high temperature brazing using a silver based alloy, achieving an axial FBG compression of 13 millistrain at room temperature. Initial results shows that the test component can be used for up to 700°C for sensing applications.

  9. New design for temperature–strain discrimination using fiber Bragg gratings embedded in laminated composites

    International Nuclear Information System (INIS)

    A new smart structure based on fiber Bragg gratings (FBGs) embedded into composite laminates for temperature and strain simultaneous measurement has been designed and experimentally tested. Two holes have been drilled at preset locations in the composite plate to create different strain sensitivities at different locations. The proposed design has been compared to three reference sensing heads also based on embedding FBGs into composite materials. Experimental results agree remarkably well with mechanical simulations and validate all the tested designs for the temperature–strain discrimination. Based on the same principle, another sensing head with a long single FBG embedded has also been designed and experimentally tested, obtaining temperature independent strain measurement. (paper)

  10. Thinned fibre Bragg grating as a fuel adulteration sensor: simulation and experimental study

    Science.gov (United States)

    Agarwal, S.; Prajapati, Y. K.; Mishra, V.

    2015-12-01

    This paper presents the implementation of a thinned fibre Bragg grating as a fuel adulteration sensor for volatile organic compounds. The proposed sensor can detect upto 10% adulteration of benzene, toluene and xylene: hydrocarbons precisely, whereas traditional methods can detect only upto 20% adulteration. The results obtained from the experiments are verified using Finite Difference Time Domain method. It is found that experimental results have very less deviation from simulation results. The proposed sensor provides us with the new possibility that may have commercial application, as well.

  11. Rovibrational hybrid fs/ps CARS using a volume Bragg grating for N₂ thermometry.

    Science.gov (United States)

    Scherman, M; Nafa, M; Schmid, T; Godard, A; Bresson, A; Attal-Tretout, B; Joubert, P

    2016-02-01

    Coherent anti-Stokes Raman scattering (CARS) spectra of N2 in the hybrid femtosecond/picosecond regime have been recorded with 0.7  cm(-1) resolution. The Q-branch rovibrational structure has been resolved, making it suitable for gas-phase simultaneous rotational and vibrational thermometry applications. Resolving this spectral structure requires synchronization of a narrowband picosecond probe pulse with a broadband femtosecond pair of pump and Stokes pulses. It is achieved using a single femtosecond ytterbium-laser source and a volume Bragg grating in a compact experimental arrangement. PMID:26907404

  12. Embedded Fibre Bragg Grating Sensor Response Model: Crack Growing Detection in Fibre Reinforced Plastic Materials

    DEFF Research Database (Denmark)

    Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm

    2015-01-01

    This article presents a novel method to simulate the sensor output response of a Fibre Bragg Grating (FBG) sensor when embedded in a host material (Composite material or adhesive), during a crack growing/damage event. A finite element model of the crack growth mechanisms was developed...... the crack or non-uniform strain, and then identify the presence of such damage in the structure. Experimental tests were conducted in order to validate this concept and support the model. The FBG sensor response model was applied in a delamination of a Wind Turbine trailing edge, to demonstrate...

  13. Bragg grating writing in PMMA microstructured polymer optical fibers in less than 7 minutes

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Markos, Christos;

    2014-01-01

    We demonstrate fiber Bragg grating (FBG) writing in PMMA microstructured Polymer Optical Fibers (mPOFs) using UV Phase Mask technique with writing times shorter than 10 min. The shortest writing time was 6 minutes and 50 seconds and the longest writing time was 8 min and 50 sec. The FBGs were...... written in a 125 x00B5;m PMMA mPOF having 3-rings of holes, the reflection peaks were centred at 632.6 nm and have a reflectivity as high as 26 dB. We also demonstrate how the writing dynamics depends on the intensity of the writing beam....

  14. Remote fiber optic switch powered by light for robust interrogation of fiber Bragg grating sensor networks

    International Nuclear Information System (INIS)

    In this work, a remote fiber optic switch powered by light is demonstrated experimentally. This fiber optic switch is powered by a photovoltaic power converter illuminated by a Raman laser. The switch can operate at distances up to 100 km. This switch is used to develop a remote resilient fiber Bragg grating (FBG) multiplexing network interrogated by a commercial FBG interrogator. In the proposed set-up the switch selects the branch of the FBG network located 50 km away from the interrogation unit in order to enable a two-way interrogation path for each sensor to prevent connection failures or fiber breakages. (paper)

  15. Fiber Bragg Grating Sensor as Valuable Technological Platform for New Generation of Superconducting Magnets

    CERN Document Server

    Chiuchiolo, A; Cusano, A; Bajko, M; Perez, J C; Bajas, H; Viret, P; Giordano, M; Breglio, G

    2014-01-01

    New generation of superconducting magnets for high energy applications designed, manufactured and tested at the European Organization for Nuclear Research (CERN) require the implementation of reliable sensors able to monitor the mechanical stresses affecting the winding from fabrication to operation in magnetic field of 13 T. This work deals with the embedding of Fiber Bragg Grating sensors in a short model Nb3Sn dipole magnet in order to monitor the strain developed in the coil during the cool down to 1.9 K, the powering up to 15.8 kA and the warm up, offering perspectives for the replacement of standard strain gauges.

  16. Bidirectional Wavelength Reconfigurable Module Based on Tunable Fiber Bragg Grating and Remote Pump Amplifier

    Science.gov (United States)

    Yu, Yi-Lin; Liaw, Shien-Kuei; Skaljo, Edvin; Le Minh, Hoa; Ghassemlooy, Zabih

    2014-09-01

    This article presents a novel bidirectional wavelength reconfigurable optical network utilizing a remotely pumped erbium-doped fiber amplifier and tunable fiber Bragg gratings. The system is experimentally demonstrated at a 10-Gb/s per channel over 20-km fiber span that verifies the metro-network range system performance. The achieved power penalty is less than 1 dB when compared to the back-to-back transmission link. An example of practical application where the proposed module is used as an add/drop multiplexer and a remote node in the bidirectional wavelength division multiplexing passive optical network system is described.

  17. Additive non-uniform random sampling in superimposed fiber Bragg grating strain gauge

    International Nuclear Information System (INIS)

    This paper demonstrates an additive non-uniform random sampling and interrogation method for dynamic and/or static strain gauge using a reflection spectrum from two superimposed fiber Bragg gratings (FBGs). The superimposed FBGs are designed to generate non-equidistant space of a sensing pulse train in the time domain during dynamic strain gauge. By combining centroid finding with smooth filtering methods, both the interrogation speed and accuracy are improved. A 1.9 kHz dynamic strain is measured by generating an additive non-uniform randomly distributed 2 kHz optical sensing pulse train from a mean 500 Hz triangular periodically changing scanning frequency. (paper)

  18. Double optical bistability and its application in nonlinear chalcogenide-fiber Bragg gratings

    International Nuclear Information System (INIS)

    We study the continuous wave (CW) nonlinear transmission characteristics of chalcogenide-fiber Bragg gratings (c-FBGs). The set of Cubic quintic septic nonlinear coupled mode equations (CQSNLCMEs) is derived analytically to govern nonlinear wave propagation in c-FBGs by counting until seventh-order nonlinearity in chalcogenide glass. Double-optical bistability is observed in the CW nonlinear transmission characteristics of π phase-shifted c-FBG. Based on unstable state principle in the hysteresis, all-optical transistor operation is shown as a prominent application of optical bistability in such device

  19. Birefringence properties of a polarization maintaining Panda fibre during Bragg grating regeneration

    Science.gov (United States)

    Polz, Leonhard; Jarsen, Andreas; Bartelt, Hartmut; Roths, Johannes

    2015-09-01

    Regeneration of fibre Bragg gratings under application of a high temperature annealing process in a high birefringent polarisation maintaining fibre of type Panda was investigated. During the annealing process, a distinct nonlinearity and hysteresis of the birefringence with temperature was observed. After the temperature process, the birefringence between slow and fast axis at room temperature was nearly doubled, which is in agreement with observations of other researchers. The hysteresis in birefringence might be explained by the crossing of the transition temperature of the stress applying parts and the relief of in-frozen mechanical and thermal stresses.

  20. Shear stress sensing with Bragg grating-based sensors in microstructured optical fibers.

    Science.gov (United States)

    Sulejmani, Sanne; Sonnenfeld, Camille; Geernaert, Thomas; Luyckx, Geert; Van Hemelrijck, Danny; Mergo, Pawel; Urbanczyk, Waclaw; Chah, Karima; Caucheteur, Christophe; Mégret, Patrice; Thienpont, Hugo; Berghmans, Francis

    2013-08-26

    We demonstrate shear stress sensing with a Bragg grating-based microstructured optical fiber sensor embedded in a single lap adhesive joint. We achieved an unprecedented shear stress sensitivity of 59.8 pm/MPa when the joint is loaded in tension. This corresponds to a shear strain sensitivity of 0.01 pm/µε. We verified these results with 2D and 3D finite element modeling. A comparative FEM study with conventional highly birefringent side-hole and bow-tie fibers shows that our dedicated fiber design yields a fourfold sensitivity improvement. PMID:24105585

  1. A high sensitive fiber Bragg grating(FBG) geophone detecting system

    Science.gov (United States)

    Wang, Jin-Yu; Qi, Hai-Feng; Song, Guang-Dong; Wang, Chang; Liu, Tong-Yu

    2012-02-01

    A high sensitive fiber Bragg grating (FBG) geophone detecting system based on narrow line width distributed feedback (DFB) laser is realized by using filtering demodulation. Sensitivity of FBG geophone lies on the structure of the sensor shell and the shape of the reflectivity spectrum of FBG. Experiments on the detecting system's frequency character have been done. Results show that this geophone can detect the smallest acceleration of 1mm/s2 with a flat response from 5Hz to 40Hz.. The experiments on coal mine exhibit that the geophone can be used to measure microseismic signals. The detecting system shows great prospect in micro-seismic detection, and geological disasters detecting.

  2. Optofluidic Temperature and Pressure Measurements with Fiber Bragg Gratings Embedded in Microfluidic Devices

    CERN Document Server

    Cooksey, Gregory A

    2016-01-01

    The integration of photonic sensors into microfluidic devices provides opportunities for dynamic measurement of chemical and physical properties of fluids in very small volumes. We previously reported on the use of commercially available Fiber Bragg Gratings (FBGs) and on-chip silicon waveguides for temperature sensing. In this report, we demonstrate the integration of FBGs into easy-to-fabricate microfluidic devices and report on their sensitivity for temperature and pressure measurement in microliter volumes. These sensors present new routes to measurement in microfluidic applications such as small-volume calorimetry and microflow metrology.

  3. Quasi-distributed fiber Bragg grating temperature sensors for stator bars monitoring of large electric generators

    Science.gov (United States)

    Dreyer, Uilian J.; da Silva, Erlon V.; Biffe Di Renzo, André; Martelli, Cicero; Cardozo da Silva, Jean Carlos

    2016-05-01

    This work presents the application of a sensor based on quasi-distributed Fiber Bragg Gratings to monitor stator bars temperature of large electric generators. The applied FBG packaging method follows industrial standard procedures, and resulted in a robust and reliable sensing method, facilitating the future installation in the power plant. Experimental results are acquired in laboratory using the expected range of temperature values in the real machine. The measurement errors in the recorded results are within the calculated uncertainties and the time constant is shorter than what is obtained with conventional RTD for the same application.

  4. Simulation of path delay multiplexing-based Fourier transform spectrometer for fiber Bragg grating interrogation.

    Science.gov (United States)

    Chelliah, Pandian; Sahoo, Trilochan; Singh, Sheela; Sujatha, Annie

    2015-10-20

    A Fourier transform spectrometer (FTS) used for interrogating a fiber Bragg grating (FBG) consists of a scanning-type interferometer. The FTS has a broad wavelength range of operation and good multiplexing capability. However, it has poor wavelength resolution and interrogation speed. We propose a modification to the FTS using path delay multiplexing to improve the same. Using this method, spatial resolution and interrogation time can be improved by n times by using n path delays. In this paper, simulation results for n=2, 5 are shown.

  5. Application of Fiber Bragg Grating for Determining Positions of Gas Absorption Lines

    Institute of Scientific and Technical Information of China (English)

    韩文念; 汪曣; 马凤; 刘琨; 贾大功; 刘铁根; 张红霞

    2010-01-01

    Fiber Bragg grating(FBG) is used as a wavelength reference device to calibrate the position of gas absorption peak in the intracavity absorption gas sensor(ICAGS) based on erbium-doped fiberring laser.This system can detect both the reflectance spectrum of FBGs and absorption spectrum of measured gas during a single wavelength sweeping process by linearly varying the driving voltage of optic filter.The voltages corresponding to center wavelength positions of four FBGs in the spectrum are determined through ...

  6. Strain transfer of surface-bonded fiber Bragg grating sensors for airship envelope structural health monitoring

    Institute of Scientific and Technical Information of China (English)

    Hai-tao ZHAO; Quan-bao WANG; Ye QIU; Ji-an CHEN; Yue-ying WANG; Zhen-min FAN

    2012-01-01

    This paper deals with an improved bonding approach ofsurface-bonded fiber Bragg grating (FBG) sensors for airship envelope structural health monitoring (SHM) under the strain transfer theory.A theoretical formula is derived from the proposed model to predict the strain transfer relationship between the airship envelope and fiber core.Then theoretical predictions are validated by numerical analysis using the finite element method (FEM).Finally,on the basis of the theoretical approach and numerical validation,parameters that influence the strain transfer rate from the airship envelope to fiber core and the ratio of effective sensing length are analyzed,and some meaningful conclusions are provided.

  7. Low-threshold wavelength-switchable fiber laser based on few-mode fiber Bragg grating

    Science.gov (United States)

    Qi, Yanhui; Sun, Jiang; Kang, Zexin; Ma, Lin; Jin, Wenxing; Jian, Shuisheng

    2016-05-01

    We propose a backward-pump transverse mode fiber laser to generate optical beams based on few-mode fiber Bragg grating. The grating as a transverse mode filter possesses several reflection peaks by adjusting the core-offset. The transverse mode fiber laser operates at extremely low thresholds which are about 20, 16.5 and 16 mW corresponding to different operation wavelengths of 1560.98, 1562.32 and 1563.76 nm, respectively. The optical signal to noise ratios are about 72, 75.5 and 75.8 dB, when the pump power is fixed at 100 mW, respectively. The effectively exciting modes corresponding to each reflection peak interfere with each other. Different optical beams can be achieved by changing the operating wavelength or changing the state of PC. The device maybe find its applications such as sensing, transporting or manipulating microscopic particles.

  8. Post-Impact Fatigue Damage Monitoring Using Fiber Bragg Grating Sensors

    Directory of Open Access Journals (Sweden)

    Chow-Shing Shin

    2014-03-01

    Full Text Available It has been shown that impact damage to composite materials can be revealed by embedded Fiber Bragg Gratings (FBG as a broadening and splitting of the latter’s characteristic narrow peak reflected spectrum. The current work further subjected the impact damaged composite to cyclic loading and found that the FBG spectrum gradually submerged into a rise of background intensity as internal damages progressed. By skipping the impact, directing the impact to positions away from the FBG and examining the extracted fibers, we concluded that the above change is not a result of deterioration/damage of the sensor. It is caused solely by the damages initiated in the composite by the impact and aggravated by fatigue loading. Evolution of the grating spectrum may therefore be used to monitor qualitatively the development of the incurred damages.

  9. Improvement on peak-to-trough ratio of sampled fiber Bragg gratings with multiple phase shifts

    Institute of Scientific and Technical Information of China (English)

    Bin Xie; Wei Pan; Bin Luo; Xihua Zou

    2008-01-01

    Via a cascaded structure, the peak-to-trough ratio is considerably improved for sampled fiber Bragg gratings (SFBGs) based on multiple-phase-shift (MPS) technique. This cascaded filter is composed of two identical SFBGs which are inserted with the increasing or decreasing arrangement of phase shifts.With this inverse arrangement of MPS in grating design, the phase fluctuation of individual SFBG can be compensated, and as a result an excellent phase matching condition is realized. In this way, the peak-to-trough ratio in reflection spectra is improved from 6 to 12 dB when multiplication factor m = 4, and from 5 dB to 10 dB when m=8.

  10. Polarization-resolved sensing with tilted fiber Bragg gratings: theory and limits of detection

    CERN Document Server

    Bialiayeu, Aliaksandr; Albert, Jacques

    2015-01-01

    Polarization based sensing with tilted fiber Bragg grating (TFBG) sensors is analysed theoretically by two alternative approaches. The first method is based on tracking the grating transmission for two orthogonal states of linear polarized light that are extracted from the measured Jones matrix or Stokes vectors of the TFBG transmission spectra. The second method is based on the measurements along the system principle axes and polarization dependent loss (PDL) parameter, also calculated from measured data. It is shown that the frequent crossing of the Jones matrix eigenvalues as a function of wavelength leads to a non-physical interchange of the calculated principal axes; a method to remove this unwanted mathematical artefact and to restore the order of the system eigenvalues and the corresponding principal axes is provided. A comparison of the two approaches reveals that the PDL method provides a smaller standard deviation and therefore lower limit of detection in refractometric sensing. Furthermore, the pol...

  11. Bragg Gratings Written in Photonic Crystal Fibres with a High-Index Germanosilicate Core

    Institute of Scientific and Technical Information of China (English)

    JIN Long; GUAN Bai-Ou; FANG Qiang; WANG Zhi; LIU Bo; LIU Jian-Guo; YUE Yang; KAI Gui-Yun; DONG Xiao-Yi

    2008-01-01

    Bragg gratings are straightforwardly written into a 10-ring photonic crystal fibre(PCF)with a highly Ge3+-doped core by means of a 193 nm ArF excimer laser.The grating inscription efficiency is improved,due to enhanced photosensitivity and the large overlap between the fundamental mode and the photosensitive core.The exposure duration only lasts less than 180s.In addition,the high-index core changes the modal properties of the PCF and two groups of higher order mode resonance dips are therefore obtained.A strong cladding mode resonance is observed.because the LP02-like mode has a large overlap integral with the fundamental mode.

  12. Temperature insensitive hysteresis free highly sensitive polymer optical fiber Bragg grating humidity sensor.

    Science.gov (United States)

    Woyessa, Getinet; Nielsen, Kristian; Stefani, Alessio; Markos, Christos; Bang, Ole

    2016-01-25

    The effect of humidity on annealing of poly (methyl methacrylate) (PMMA) based microstructured polymer optical fiber Bragg gratings (mPOFBGs) and the resulting humidity responsivity are investigated. Typically annealing of PMMA POFs is done in an oven without humidity control around 80°C and therefore at low humidity. We demonstrate that annealing at high humidity and high temperature improves the performances of mPOFBGs in terms of stability and sensitivity to humidity. PMMA POFBGs that are not annealed or annealed at low humidity level will have a low and highly temperature dependent sensitivity and a high hysteresis in the humidity response, in particular when operated at high temperature. PMMA mPOFBGs annealed at high humidity show higher and more linear humidity sensitivity with negligible hysteresis. We also report how annealing at high humidity can blue-shift the FBG wavelength more than 230 nm without loss in the grating strength. PMID:26832503

  13. Digital monitoring for heavy duty mechanical equipment based on fiber Bragg grating sensor

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The digital monitoring principle and technologies for heavy duty mechanical equipment based on fiber Bragg grating (FBG) technology are introduced in this paper. The fundamentals of new-style FBG sensing technology, including the photorefractive effect of FBG, the physical formation, and the relation between optical properties and grating parameters, are investigated. The plaster, encapsulation and distribution planning of FBG sensor (FBGS), which is used to monitor heavy duty mechanical equipment under abominable environment and extreme conditions, are also studied. In addition, theoretical and experimental researches on the strain, temperature, displacement, and stress transmission characteristics between FBGS and detection interface are presented. The principle and method for temperature compensation in non-uniformity temperature field are described in detail as well. Comparing with the traditional sensing monitoring techniques, the application of FBGS technology on digital monitoring and diagnosis for heavy duty mechanical equipment has a number of significant technical advantages and will make a new breakthrough in this field.

  14. A novel oil level monitoring sensor based on string tilted fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    JIANG Qi

    2011-01-01

    In this paper, we present a novel oil level monitoring sensor based on string tilted fiber Bragg grating (TFBG). The mea- surement range and sensitivity of oil level monitoring can be modulated via changing the length and number of string tilted fiber gratings. The transmission spectrum of string TFBGs immersed in oil changes obviously with the oil level variation. Experiments are conducted on three 2 crn-length serial TFBGs with the same tilted angle of 10°. A sensitivity of 3.28 dB/cm in the string TFBG sensor is achieved with good linearity by means of TFBG spectrum characteristic with peak-low value. The cladding mode transmission power and the amplitude of high order cladding mode resonance are nearly linear to the oil level variation. This kind of sensor is insensitive to temperature and attributed to be employed in extremely harsh environ- ment oil monitoring.

  15. Numerical analysis of double chirp effect in tapered and linearly chirped fiber Bragg gratings.

    Science.gov (United States)

    Markowski, Konrad; Jedrzejewski, Kazimierz; Osuch, Tomasz

    2016-06-10

    In this paper, a theoretical analysis of recently developed tapered chirped fiber Bragg gratings (TCFBG) written in co-directional and counter-directional configurations is presented. In particular, the effects of the synthesis of chirps resulting from both a fused taper profile and a linearly chirped fringe pattern of the induced refractive index changes within the fiber core are extensively examined. For this purpose, a numerical model based on the transfer matrix method (TMM) and the coupled mode theory (CMT) was developed for such a grating. The impact of TCFBG parameters, such as grating length and steepness of the taper transition, as well as the effect of the fringe pattern chirp rate on the spectral properties of the resulting gratings, are presented. Results show that, by using the appropriate design process, TCFBGs with reduced or enhanced resulting chirp, and thus with widely tailored spectral responses, can be easily achieved. In turn, it reveals a great potential application of such structures. The presented numerical approach provides an excellent tool for TCFBG design. PMID:27409005

  16. Fabrication and stability of fiber bragg gratings for WDM applications using a 266 nm cw-laser

    DEFF Research Database (Denmark)

    Deyerl, Hans-Jürgen; Sørensen, Henrik Rokkjær; Jensen, Jesper Bo Damm;

    2003-01-01

    Diode pumped continuous wave all solid state UV-lasers operating at 266 nm offer an interesting alternative to frequency doubled argon ion lasers. We compare photosensitivity, UV-writing of Bragg gratings and thermal decay at 244, 257 and 266 nm.......Diode pumped continuous wave all solid state UV-lasers operating at 266 nm offer an interesting alternative to frequency doubled argon ion lasers. We compare photosensitivity, UV-writing of Bragg gratings and thermal decay at 244, 257 and 266 nm....

  17. Characteristics of light polarization in magneto-optic fiber Bragg gratings with linear birefringence

    Institute of Scientific and Technical Information of China (English)

    Baojian Wu; Chongzhen Li; Kun Qiu; Liwei Cheng

    2011-01-01

    @@ The coupling between guided optical waves in magneto-optic fiber Bragg gratings (MFBGs) with linear birefringence is investigated using the eigen-mode and coupled-mode approaches. The relationship between the polarization-dependent loss (PDL) and the eigen states of polarization (SOPs) in the MFBGs is discussed. Only the MFBGs with low linear birefringence are applied to the peak PDL-based magnetic field measurement, after which the linear dynamic range is determined using the relative magnitude of linear and magnetically induced circular birefringence. In this letter, a theoretical model is presented to explain the experimental results and help develop novel MFBG-based devices.%The coupling between guided optical waves in magneto-optic fiber Bragg gratings (MFBGs) with linear birefringence is investigated using the eigen-mode and coupled-mode approaches. The relationship between the polarization-dependent loss (PDL) and the eigen states of polarization (SOPs) in the MFBGs is discussed. Only the MFBGs with low linear birefringence are applied to the peak PDL-based magnetic field measurement, after which the linear dynamic range is determined using the relative magnitude of linear and magnetically induced circular birefringence. In this letter, a theoretical model is presented to explain the experimental results and help develop novel MFBG-based devices.

  18. Tunable spiral Bragg gratings in 60-nm-thick silicon-on-insulator strip waveguides.

    Science.gov (United States)

    Zou, Zhi; Zhou, Linjie; Wang, Minjuan; Wu, Kan; Chen, Jianping

    2016-06-13

    We demonstrate spiral integrated Bragg gratings (IBGs) in 60-nm-thick strip waveguides on the silicon-on-insulator (SOI) platform. The length of the spiral IBG is 2 mm, occupying an area of 147 × 141 μm2 with a minimum bending radius of 20 μm. Experiments show that the spiral IBGs exhibit a single narrow transparent peak with a Q-factor of 1 × 105 in a broad stopband, induced by the phase shift of the S-junction at the spiral center. This phenomenon is analogous to the electromagnetically induced transparency (EIT) effect. The transparent peak can periodically shift in the stopband upon heating of the S-junction using a TiN-based heater on top. The peak transmittance and Q-factor are dependent on the reflectivity of the spiral IBG. The transparent peak can be completely eliminated under a certain tuning power, and the spiral IBG hence behaves as a bandstop optical filter. The bandwidth is 0.94 nm and the extinction ratio is as high as 43 dB. The stopband can also be shifted by heating the Bragg gratings using a separate TiN heater. The experimental results agree well with the modeling results based on the transfer matrix method. PMID:27410302

  19. Hybrid polymers processed by substrate conformal imprint lithography for the fabrication of planar Bragg gratings

    Science.gov (United States)

    Foerthner, M.; Rumler, M.; Stumpf, F.; Fader, R.; Rommel, M.; Frey, L.; Girschikofsky, M.; Belle, S.; Hellmann, R.; Klein, J. J.

    2016-03-01

    In this work, we present an approach to use UV-enhanced substrate conformal imprint lithography (UV-SCIL) as a soft imprint technique combined with excimer laser irradiation to manufacture Bragg gratings within planar waveguides on a full-wafer scale. For the first time, different hybrid polymers (OrmoComp®, OrmoStamp, OrmoCore, OrmoClad and OrmoClear) could be successfully patterned using UV-SCIL. For OrmoComp® (showing results very similar to OrmoStamp and OrmoClad), a complete imprint process could be realized. OrmoCore formed an inhibition layer in the presence of oxygen during the imprint, as could be observed for the use of OrmoClear as well. Processing options were elaborated to reduce the inhibition effect significantly, whereby the latter is mainly due to the atmospheric oxygen-containing PDMS layer of the UV-SCIL working stamp. Further on, the successful realization of a planar Bragg grating operating at the telecom wavelength is demonstrated by tuning the refractive index (RI) of OrmoComp® using a phase mask and an UV excimer laser. FTIR measurements show that the change in RI can be clearly correlated with a change in the chemical composition of the hybrid polymer during laser exposure.

  20. Fiber Optic Bragg Grating Sensor for Crack Growth Detection of Structures

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Il Bum; Seo, Dae Cheol; Kim, Chi Yeop; Yoon, Dong Jin; Lee, Seung Seok [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

    2007-08-15

    There are to be some cracks on the material degradation part or the stress concentration parts of the main members, which carry on over-loads, of structures. Because these cracks can be used to evaluate the structural health status, it is important to monitor the crack growth for maintaining the structural safety. In this study, the fiber Bragg grating sensor with a drop ball was developed as a sensor for crack growth detection of an existing crack. The crack growth detection sensor was constructed with three parts: a probe part, a wavelength controlling light source and receiver part, and an impact part. The probe part was just formed with a fiber Bragg grating optical fiber The wavelength controlling light source part was composed of a current supplying circuit, a DFB laser diode, and a TEC controlling circuit for wavelength control. Also, the impact part was just implemented by dropping a steel ball. The performance of this sensor was confirmed by the experiments of the crack detection with an aluminum plate having one existing crack. According to these experiments, the difference of the sensor signal outputs was correlated with the crack length. So, it was confirmed that this sensor could be applied to monitor the crack growth

  1. Multi-channel monolithic integrated optic fiber Bragg grating sensor interrogator

    Science.gov (United States)

    Mendoza, Edgar A.; Esterkin, Yan; Kempen, Cornelia; Sun, Zongjian

    2011-09-01

    Fiber Bragg grating (FBG) is a mature sensing technology for the measurement of strain, vibration, acoustics, acceleration, pressure, temperature, moisture, and corrosion. It has gained rapid acceptance in civil, aerospace, chemical and petrochemical, medicine, aviation and automotive industries. The most prominent advantages of FBG are: small size and light weight, distributed array of FBG transducers on a single fiber, and immunity to radio frequency interference. However, a major disadvantage of FBG technology is that conventional state-of-the-art FBG interrogation system is typically bulky, heavy, and costly bench top instruments that are typically assembled from off-the-shelf fiber optic and optical components integrated with a signal electronics board into an instrument console. Based on the industrial need for a compact FBG interrogation system, this paper describes recent progress towards the development of miniature fiber Bragg grating sensor interrogator (FBG-Transceiver™) system based on multi-channel monolithic integrated optic sensor microchip technology. The integrated optic microchip technology enables monolithic integration of all functionalities, both passive and active, of conventional bench top FBG sensor interrogator system, packaged in a miniaturized, low power operation, 2 cm×5 cm small form factor (SFF) package suitable for long-term structural health monitoring in applications where size, weight, and power are critical for operation.

  2. Health monitoring of the Saint-Jean bridge of Bordeaux, France using fiber Bragg grating extensometers

    Science.gov (United States)

    Magne, Sylvain; Boussoir, Jonathan; Rougeault, Stephane; Marty-Dewynter, Veronique; Ferdinand, Pierre; Bureau, Lionel

    2003-07-01

    Most civil engineering structures have been built in the 50's and 60's and reach similar level of degradation accelerated by loading conditions and corrosion. In Europe, National Authorities and the European Commission promote Health Monitoring concepts, instrumentation of existing structures and help in the design of new durable structures of higher performance. In this context, the CEA-List has achieved a non-exclusive industrial transfer of its Bragg grating sensing technology for civil engineering applications to Hydrolog (French SME), supported by the European Community and the french ministry of Industry. In order to check the reliability and user-friendliness of this instrumentation, eleven spectrally-multiplexed Bragg grating-based extensometers, four FBG temperature sensors and an acquisition unit have been installed into the Saint-Jean bridge in Bordeaux, France with the help of the Infrastructure Regional Direction (DRE-Aquitaine) and the Bordeaux Authority (Communaute Urbaine de Bordeaux). A standardized loading of the bridge has been performed on October 29, 1001, with the purpose of correlating its mechanical reaction to loading conditions. Moreover, the equipment has been operating for one year to take into account the winter-summer cycle.

  3. Design and experimental research on cantilever accelerometer based on fiber Bragg grating

    Science.gov (United States)

    Xiang, Longhai; Jiang, Qi; Li, Yibin; Song, Rui

    2016-06-01

    Currently, an acceleration sensor based on fiber Bragg grating (FBG) has been widely used. A cantilever FBG accelerometer is designed. The simulation of this structure was implemented by finite element software (ANSYS) to analyze its sensing performance parameters. And then the optimized structure was produced and calibration experiments were conducted. On the basis of simulation, optical fiber is embedded in the inner tank of the vibrating mass, and Bragg grating is suspended above the cantilever structure, which can effectively avoid the phenomenon of center wavelength chirp or broadening, and greatly improve the sensitivity of the sensor. The experimental results show that the FBG accelerometer exhibits a sensitivity of 75 pm/(m/s2) (100 Hz) and dynamic range of 60 dB. Its linearity error is <2.31% and repeatability error is <2.76%. And the resonant frequency is ˜125 Hz. The simulation results match the experimental results to demonstrate the good performance of FBG accelerometer, which is expected to be used in the actual project.

  4. Narrow band SWIR hyperspectral imaging: a new approach based on volume Bragg grating

    Science.gov (United States)

    Verhaegen, M.; Lessard, S.; Blais-Ouellette, S.

    2012-06-01

    Volume Bragg grating technology has enabled the development of a new type of staring hyperspectral camera. Based on Bragg Tunable filters, these hyperspectral cameras have both high spectral and spatial resolution, and significantly higher sensitivity than competing technologies like push broom spectrometer, liquid crystal tunable filters, or acousto-optic tunable filters. They are minimally sensitive to polarization and their spectral isolation can reach 106. Here we thus present an innovative tool to collect SWIR hyperspectral data with high spectral and spatial resolution. This new instrument is based on a 3nm bandwidth Bragg Tunable Filter, continuously tunable from 1.0um and 2.5um. Because high spectral resolution also means less light per channel, a low noise custom HgCdTe (MCT) camera was also developed to meet the requirement of the filter. The high speed capability of more than 300 fps and the low operating temperature of 200K (deep cooled option to 77K) allow full frame 500 spectral channel datacube acquisitions in minimal time. Basic principle of this imaging filter will be reviewed as well as the custom MCT camera performances. High resolution hyperspectral measurements will be demonstrated between 1.0um and 2.5um on different objects.

  5. Transmission comb of a distributed Bragg reflector induced by two surface dielectric gratings

    CERN Document Server

    Zhao, Xiaobo; Zhang, Yongyou

    2015-01-01

    With transfer matrix theory, we study the transmission of a distributed Bragg reflector (DBR) with two dielectric gratings on top and on the bottom. Owing to the diffraction of the two gratings, the transmission shows a comb-like spectrum which red shifts with increasing the grating period during the forbidden band of the DBR. The number density of the comb peaks increases with increasing the number of the DBR cells, while the ratio of the average full width at half maximum (FWHM) of the transmission peaks in the transmission comb to the corresponding average free spectral range, being about 0.04 and 0.02 for the TE and TM incident waves, is almost invariant. The average FWHM of the TM waves is about half of the TE waves, and both they could be narrower than 0.1 nm. In addition, the transmission comb peaks of the TE and TM waves can be fully separated during certain waveband. We further prove that the transmission comb is robust against the randomness of the heights of the DBR layers, even when a 15\\% randomn...

  6. Temperature-insensitive fiber Bragg grating displacement sensor based on a thin-wall ring

    Science.gov (United States)

    Tao, Sicong; Dong, Xiaopeng; Lai, Bowen

    2016-08-01

    The study on strain distribution of a thin-wall ring is presented and a bandwidth-demodulated displacement sensor based on a fiber Bragg grating (FBG) is proposed. The FBG is glued onto the inner surface of a spring steel ring, and it is found that its bandwidth is linearly changed with the displacement variation of the top point of the ring due to the ring-compression-induced gradient strain. The PD output responses of different grating lengths to the same dimension of the ring are investigated. Experimental results show that the high sensitivity and accuracy of 0.567 nm mm-1 and ±0.04 mm using 10 mm grating is achieved within a displacement range of 0-3.5 mm. The designed structure has a higher 3dB-bandwidth tuning ratio of 0.057 nm mm-2. A temperature stability better than ±0.02 mm over the temperature range from 0 to 60 °C is demonstrated.

  7. Fibre Bragg Grating Sensor Signal Post-processing Algorithm: Crack Growth Monitoring in Fibre Reinforced Plastic Structures

    DEFF Research Database (Denmark)

    Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm

    2016-01-01

    A novel method to assess a crack growing/damage event in fibre reinforced plastic, using conventional single mode Fibre Bragg Grating sensors embedded in the host material is presented in this article. Three different damage mechanisms that can change the sensor output, longitudinal strain exx...... in three different loading conditions, where were obtained very promising results that enable crack growth monitoring...

  8. High-Tg TOPAS microstructured polymer optical fiber for fiber Bragg grating strain sensing at 110 degrees

    DEFF Research Database (Denmark)

    Markos, Christos; Stefani, Alessio; Nielsen, Kristian;

    2013-01-01

    We present the fabrication and characterization of fiber Bragg gratings (FBGs) in an endlessly single-mode microstructured polymer optical fiber (mPOF) made of humidity-insensitive high-Tg TOPAS cyclic olefin copolymer. The mPOF is the first made from grade 5013 TOPAS with a glass transition...

  9. Efficient bragg grating fabrication in Ge-rich fibre by high-intensity femtosecond 264 mm irradation

    DEFF Research Database (Denmark)

    Slattery, S.A.; Nikogasyan, D.N.; Plougmann, Nikolai;

    2004-01-01

    Fibre Bragg gratings (FBGs) are usually fabricated by UV laser light (typically, 248 nm radiation from a KrF* excimer laser), which spectrally coincides with the absorption band of defects in germanosilicate fibre core [1, 2]. Recently, it was demonstrated that the use of highintensity femtosecon...

  10. Group velocity dispersion and polarization mode dispersion compensation by high-birefringence linearly chirped fiber Bragg grating

    Institute of Scientific and Technical Information of China (English)

    Muguang Wang(王目光); Tangjun Li(李唐军); Shuisheng Jian(简水生)

    2004-01-01

    A high-birefringence linearly chirped fiber Bragg grating (FBG) is written into a polarization-maintaining photosensitive fiber by ultraviolet (UV) beam through a linearly chirped phase mask. Its performance as group velocity dispersion (GVD) and polarization mode dispersion (PMD) compensator is demonstrated in short pulse fiber optical transmission systems.

  11. Fiber Bragg Grating Sensor/Systems for In-Flight Wing Shape Monitoring of Unmanned Aerial Vehicles (UAVs)

    Science.gov (United States)

    Parker, Allen; Richards, Lance; Ko, William; Piazza, Anthony; Tran, Van

    2006-01-01

    A viewgraph presentation describing an in-flight wing shape measurement system based on fiber bragg grating sensors for use in Unmanned Aerial Vehicles (UAV) is shown. The topics include: 1) MOtivation; 2) Objective; 3) Background; 4) System Design; 5) Ground Testing; 6) Future Work; and 7) Conclusions

  12. Simultaneous high bit-rate format and mode conversion with a single tilted apodized few-mode fiber Bragg grating

    Science.gov (United States)

    Gao, Ya; Sun, Junqiang; Sima, Chaotan

    2016-10-01

    We propose an all-optical approach for simultaneous high bit-rate return-to-zero (RZ) to non-return-to-zero (NRZ) format and LP01 to LP11 mode conversion using a weakly tilted apodized few-mode fiber Bragg grating (TA-FM-FBG) with specific linear spectral response. The grating apodization profile is designed by utilizing an efficient inverse scattering algorithm and the maximum refractive index modulation is adjusted based on the grating tilt angle, according to Coupled-Mode Theory. The temporal performance and operation bandwidth of the converter are discussed. The approach provides potential favorable device for the connection of various communication systems.

  13. Fiber Optic Fabry-Perot Current Sensor Integrated with Magnetic Fluid Using a Fiber Bragg Grating Demodulation.

    Science.gov (United States)

    Xia, Ji; Wang, Qi; Liu, Xu; Luo, Hong

    2015-07-09

    An optical fiber current sensor based on Fabry-Perot interferometer using a fiber Bragg grating demodulation is proposed. Magnetic fluid is used as a sensitive medium in fiber optical Fabry-Perot (F-P) cavity for the optical characteristic of magnetic-controlled refractive index. A Fiber Bragg grating (FBG) is connected after the F-P interferometer which is used to reflect the optical power at the Bragg wavelength of the interference transmission spectrum. The corresponding reflective power of the FBG will change with different external current intensity, due to the shift on the interference spectrum of the F-P interferometer. The sensing probe has the advantages of convenient measurement for its demodulation, low cost and high current measurement accuracy on account of its sensing structure. Experimental results show that an optimal sensitivity of 0.8522 nw/A and measurement resolution of 0.001 A is obtained with a FBG at 1550 nm with 99% reflectivity.

  14. Fiber design and realization of point-by-point written fiber Bragg gratings in polymer optical fibers

    DEFF Research Database (Denmark)

    Stefani, Alessio; Stecher, Matthias; Town, Graham E.;

    2012-01-01

    An increasing interest in making sensors based on fiber Bragg gratings (FBGs) written in polymer optical fibers (POFs) has been seen recently. Mostly microstructured POFs (mPOFs) have been chosen for this purpose because they are easier to fabricate compared, for example, to step index fibers...... and the very long times required for the writing of FBGs raise some questions about the possibility of exporting POF FBGs and the sensors based on them from the laboratory bench to the mass production market. The possibility of arbitrary design of fiber Bragg gratings and the very short time required to write....... The grating was inspected under Differential Interferometric Contrast microscope and the reflection spectrum was measured. This is, to the best of our knowledge, the first FBGs written into a mPOF with the point-by-point technique and also the fastest ever written into a polymer optical fiber, with less than...

  15. Bragg gratings inscription in step-index PMMA optical fiber by femtosecond laser pulses at 400 nm

    Science.gov (United States)

    Hu, X.; Kinet, D.; Chah, K.; Mégret, P.; Caucheteur, C.

    2016-05-01

    In this paper, we report photo-inscription of uniform Bragg gratings in trans-4-stilbenemethanol-doped photosensitive step-index polymer optical fiber. Gratings were produced at ~1575 nm by the phase mask technique with a femtosecond laser emitting at 400 nm with different average optical powers (8 mW, 13 mW and 20 mW). The grating growth dynamics in transmission were monitored during the manufacturing process, showing that the grating grows faster with higher power. Using 20 mW laser beam power, the reflectivity reaches 94 % (8 dB transmission loss) in 70 seconds. Finally, the gratings were characterized in temperature in the range 20 - 45 °C. The thermal sensitivity has been computed equal to - 86.6 pm/°C.

  16. Acoustic Emission Measurement with Fiber Bragg Gratings for Structure Health Monitoring

    Science.gov (United States)

    Banks, Curtis E.; Walker, James L.; Russell, Sam; Roth, Don; Mabry, Nehemiah; Wilson, Melissa

    2010-01-01

    Structural Health monitoring (SHM) is a way of detecting and assessing damage to large scale structures. Sensors used in SHM for aerospace structures provide real time data on new and propagating damage. One type of sensor that is typically used is an acoustic emission (AE) sensor that detects the acoustic emissions given off from a material cracking or breaking. The use of fiber Bragg grating (FBG) sensors to provide acoustic emission data for damage detection is studied. In this research, FBG sensors are used to detect acoustic emissions of a material during a tensile test. FBG sensors were placed as a strain sensor (oriented parallel to applied force) and as an AE sensor (oriented perpendicular to applied force). A traditional AE transducer was used to collect AE data to compare with the FBG data. Preliminary results show that AE with FBGs can be a viable alternative to traditional AE sensors.

  17. Transmission comb of a distributed Bragg reflector with two surface dielectric gratings

    Science.gov (United States)

    Zhao, Xiaobo; Zhang, Yongyou; Zhang, Qingyun; Zou, Bingsuo; Schwingenschlogl, Udo

    2016-02-01

    The transmission behaviour of a distributed Bragg reector (DBR) with surface dielectric gratings on top and bottom is studied. The transmission shows a comb-like spectrum in the DBR band gap, which is explained in the Fano picture. The number density of the transmission peaks increases with increasing number of cells of the DBR, while the ratio of the average full width at half maximum to the corresponding average free spectral range, being only few percent for both transversal electric and magnetic waves, is almost invariant. The transmission peaks can be narrower than 0.1 nm and are fully separated from each other in certain wavebands. We further prove that the transmission combs are robust against randomness in the heights of the DBR layers. Therefore, the proposed structure is a candidate for an ultra-narrow-band multichannel filter or polarizer.

  18. GNOSIS: the first instrument to use fibre Bragg gratings for OH suppression

    CERN Document Server

    Trinh, Christopher Q; Bland-Hawthorn, Joss; Lawrence, Jon S; Horton, Anthony J; Leon-Saval, Sergio G; Shortridge, Keith; Bryant, Julia; Case, Scott; Colless, Matthew; Couch, Warick; Freeman, Kenneth; Loehmannsroeben, Hans-Gerd; Gers, Luke; Glazebrook, Karl; Haynes, Roger; Lee, Steve; O'Byrne, John; Miziarski, Stan; Roth, Martin M; Schmidt, Brian; Tinney, Christopher G; Zheng, Jessica

    2012-01-01

    GNOSIS is a prototype astrophotonic instrument that utilizes OH suppression fibres consisting of fibre Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47-1.7 microns. GNOSIS was commissioned at the 3.9-meter Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibres, but may be potentially used with any telescope and spectrograph combination. Unlike previous atmospheric suppression techniques GNOSIS suppresses the lines before dispersion and in a manner that depends purely on wavelength. We present the instrument design and report the results of laboratory and on-sky tests from commissioning. While these tests demonstrated high throughput and excellent suppression of the skylines by the OH suppression fibres, surprisingly GNOSIS produced no significant reduction in the interline background and the sensitivity of GNOSIS and IRIS2 is about the same as IRIS2. It is unclear whether the lack of reduction in...

  19. Wavelength stabilizer based on dual fiber Bragg gratings for 980nm Mini-uncooled pump laser

    Science.gov (United States)

    Hu, Shuangshuang; Li, Yi; Jiang, Qunjie; Wu, Bin; Yu, Xiaojing; Wang, Haifang

    2008-12-01

    High power 980nm pump lasers are the key components in optical fiber amplifier. Wavelength stability for 980nm Miniuncooled pump laser is required to maintain the amplifier's efficiency throughout its lifetime. In this paper, a new type of wavelength stabilizer for uncooled pump laser which utilizes two fiber Bragg gratings (FBGs) matched in wavelength, bandwidth, and reflectivity is presented. The characteristics of transmissivity and reflectivity for the dual FBGs stabilized 980nm pump laser are theoretically modeled and experimentally studied. The results show that the output spectral characteristics of the uncooled pump laser with the dual FBGs have been greatly improved. The laser module can work steadily over a wide temperature range from 0°C to 70°C, with 0.2nm wavelength shift, along with more than 45dB side mode suppression ratio, and less than 1.57nm spectral bandwidth.

  20. Pulsed single-photon spectrograph by frequency-to-time mapping using chirped fiber Bragg gratings

    CERN Document Server

    Davis, Alex O C; Karpinski, Michal; Smith, Brian J

    2016-01-01

    A fiber-integrated spectrograph for single-photon pulses based upon frequency-to-time mapping, implemented by chromatic group delay dispersion (GDD), and precise temporally-resolved single photon counting is presented. A chirped fiber Bragg grating provides low-loss GDD mapping the frequency distribution of an input pulse onto the temporal envelope of the output pulse. Time-resolved detection with fast single-photon-counting modules enables the monitoring of the 825 nm to 835 nm wavelength range with nearly uniform efficiency with 55 pm resolution (24 GHz at 830 nm). To demonstrate the versatility of this technique spectral interference of heralded single photons and the joint spectral intensity distribution of a photon-pair source are measured. This approach to single-photon-level spectral measurements provides a route to realize applications of time-frequency quantum optics at visible and near-infrared wavelengths, where multiple spectral channels must be simultaneously monitored.

  1. Fiber Bragg Grating Array as a Quasi Distributed Temperature Sensor for Furnace Boiler Applications

    Science.gov (United States)

    Reddy, P. Saidi; Prasad, R. L. N. Sai; Sengupta, D.; Shankar, M. Sai; Srimannarayana, K.; Kishore, P.; Rao, P. Vengal

    2011-10-01

    This paper presents the experimental work on distributed temperature sensing making use of Fiber Bragg grating (FBG) array sensor for possible applications in the monitoring of temperature profile in high temperature boilers. A special sensor has been designed for this purpose which consists of four FBGs (of wavelengths λB1 = 1547.28 nm, λB2 = 1555.72 nm, λB3 = 1550.84 nm, λB4 = 1545.92 nm) written in hydrogen loaded fiber in line with a spacing of 15 cm between them. All the FBGs are encapsulated inside a stainless steel tube for avoiding micro cracks using rigid probe technique. The spatial distribution of temperature profile inside a prototype boiler has been measured experimentally both in horizontal and vertical directions employing the above sensor and the results are presented.

  2. Femtosecond laser inscribed Bragg gratings in gold-coated fiber for space application

    Science.gov (United States)

    Wang, Qiaoni; Yang, Yuanhong; He, Jun; Wang, Yiping

    2015-09-01

    We reported a Bragg grating inscribed in gold-coated fiber (FBG) by NIR femtosecond laser (fs) for space application. Gold coating can shield the FBG from ultraviolet radiation and oxygen atom erosion. Cryogenic test, high temperature test, and gamma irradiation test were carried out. The reflectivity of the H2-free FBG remained stable at +/- 120 °C for 100 h or with 50.4 krad γ irradiation, and the central wavelength shifted within 5 pm and 1.6 pm respectively. Regeneration of the fs-FBG was observed in case the FBG was annealed at 800 °C for 5 h, and the remained 5% in reflectivity after 19 h. Such fs-FBGs inscribed in gold-coated fiber could be employed as high performance fiber sensors for space application.

  3. Mode locking at terahertz frequencies using a distributed Bragg reflector laser with a sampled grating.

    Science.gov (United States)

    Hou, Lianping; Haji, Mohsin; Marsh, John H

    2013-04-01

    We present a highly reproducible method of producing terahertz (THz) optical pulses using a class of mode-locked AlGaInAs/InP laser operating in the 1.55 μm wavelength range. The device uses a sample grating distributed Bragg reflector to provide strong frequency selectivity at the mode-locked frequency while the distributed reflectors relax the fabrication tolerances and ensure the cavity can self adjust to being an integral number of mode-locked periods in length. The measured devices provide nearly transform-limited pulse trains at 640 GHz or 1.28 THz with a high degree of controllability and operate with consistent performance over a wide range of drive conditions. Being low cost and compact sources of THz radiation, these lasers will open up many applications, including systems for high-speed optical communication and THz imaging. PMID:23546261

  4. Residual internal stress optimization for EPON 828/DEA thermoset resin using fiber Bragg grating sensors

    Science.gov (United States)

    Rohr, Garth D.; Rasberry, Roger D.; Kaczmarowski, Amy K.; Stavig, Mark E.; Gibson, Cory S.; Udd, Eric; Roach, Allen R.; Nation, Brendan

    2015-05-01

    Internal residual stresses and overall mechanical properties of thermoset resins are largely dictated by the curing process. It is well understood that fiber Bragg grating (FBG) sensors can be used to evaluate temperature and cure induced strain while embedded during curing. Herein, is an extension of this work whereby we use FBGs as a probe for minimizing the internal residual stress of an unfilled and filled Epon 828/DEA resin. Variables affecting stress including cure cycle, mold (release), and adhesion promoting additives will be discussed and stress measurements from a strain gauge pop-off test will be used as comparison. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  5. Production and Characterization of Polycarbonate Microstructured Polymer Optical Fiber Bragg Grating Sensor

    DEFF Research Database (Denmark)

    Fasano, Andrea; Woyessa, Getinet; Stajanca, P.;

    2015-01-01

    We present the fabrication and characterization of a polycarbonate (PC) microstructured polymer optical fiber (mPOF) and the writing of a fiber Bragg grating (FBG) in it to obtain a polymer optical FBG sen-sor. The manufacturing process of the PC mPOF consists of multiple consecutive stages......, such as casting of pol-ymer granulates into a solid rod, machining and drilling of a 3-ring hexagonal lattice of holes into it, and finally drawing into fiber. We demonstrate that the obtained PC mPOF is photosensitive and FBGs can be conveniently inscribed into it, thereby enabling FBG-based temperature...... and strain sensing. The PC optical fibers are for some applications an attractive alternative to conventional materials used in POF fabrication, such as polymethyl methacrylate (PMMA). In general, PC can be used at temperature up to 120 °C and breaks at considerably higher strains than PMMA....

  6. Fiber Bragg Grating sensors for deformation monitoring of GEM foils in HEP detectors

    CERN Document Server

    Benussi, L; Caponero, M; Muhammad, S; Passamonti, L; Piccolo, D; Pierluigi, D; Raffone, G; Russo, A; Saviano, G

    2015-01-01

    Fiber Bragg Grating (FBG) sensors have been so far mainly used in high energy physics (HEP) as high precision positioning and re-positioning sensors and as low cost, easy to mount, radiation hard and low space- consuming temperature and humidity devices. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide Gas Electron Multiplier (GEM) foils of the GE1/1 chambers of the Compact Muon Solenoid (CMS) experiment at Large Hadron Collider (LHC) of CERN. A network of FBG sensors has been used to determine the optimal mechanical tension applied and to characterize the mechanical stress applied to the foils. The preliminary results of the test performed on a full size GE1/1 final prototype and possible future developments will be discussed.

  7. Crack growth monitoring in composite materials using embedded optical Fiber Bragg Grating sensor

    DEFF Research Database (Denmark)

    Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm

    2015-01-01

    In this paper a novel method to assess a crack growing/damage event in fiber reinforced plastic, or adhesive using Fiber Bragg Grating (FBG) sensors embedded in a host material is shown. Different features of the crack mechanism that induce a change in the FBG response were identified. Double...... Cantilever Beams specimens made with glass fibre glued with structural adhesive, were instrumented with an array of FBG sensors embedded in the material and tested using an experimental fracture procedure. A digital image correlation technique was used to determine the presence of the specific phenomena...... caused by the crack, and to correlate with the FBG sensor. An algorithm was developed that analyses the reflected peak at each measurement time, and calculates the contribution of each fracture phenomenon to the change in the FBG response. This Material-Sensor model was implemented in a Finite Element...

  8. Interrogation of fiber-Bragg-grating temperature and strain sensors with a temperature-stabilized VCSEL

    Science.gov (United States)

    Mizunami, Toru; Yamada, Taichi; Tsuchiya, Satoshi

    2016-07-01

    The interrogation of fiber-Bragg-grating (FBG) sensors using a vertical-cavity surface-emitting laser (VCSEL) is discussed. A long-wavelength (1.54 μm) VCSEL was used as a wavelength-tunable source by variation in the current. Temperature stabilization was performed with a thermoelectric device. Characteristics of temperature and strain sensing were investigated. FBGs with different reflectivities were compared. For temperature sensing, the root-mean-square error in the measurement was reduced to 1/3 that without temperature stabilization. The dependence of the measurement error on the reflectivities of the FBGs was investigated. The measurement error was larger for FBGs with lower reflectivities in both temperature and strain sensing. Improvement on the sensing with low-reflectivity FBGs is discussed.

  9. Fiber Bragg grating laser sensor with direct radio-frequency readout.

    Science.gov (United States)

    Malara, P; Campanella, C E; Giorgini, A; Avino, S; Gagliardi, G

    2016-04-01

    A fiber Bragg grating (FBG)-coupled ring laser sensor is demonstrated. In the proposed configuration the interrogating source, the sensing head and the readout instrument are integrated in a single fiber-optic device. An FBG inserted within a bidirectional fiber ring couples the two counterpropagating modes of the cavity, generating a splitting of the resonant wavelengths proportional to the FBG reflectivity. When the cavity gain is brought beyond threshold, the two peaks of the split resonances simultaneously lase, leading to a beat note in the emission spectrum whose frequency tracks any small shift of the FBG reflectivity spectrum. Such a beat note can be simply monitored by a frequency counter, without the need for an optical spectrometer, allowing to significantly reduce size and costs of the sensor setup. The sensing performance compares well to the state-of-the-art thermo-mechanical fiber sensors. PMID:27192251

  10. Sensitivity Distribution Properties of a Phase-Shifted Fiber Bragg Grating Sensor to Ultrasonic Waves

    Directory of Open Access Journals (Sweden)

    Qi Wu

    2014-01-01

    Full Text Available In this research, the sensitivity distribution properties of a phase-shifted fiber Bragg grating (PS-FBG to ultrasonic waves were investigated employing the surface attachment method. A careful consideration was taken and examined by experimental results to explain that the distances and angles between the sensor and ultrasonic source influence not only the amplitudes, but also the initial phases, waveforms, and spectra of detected signals. Furthermore, factors, including the attachment method and the material’s geometric dimensions, were also discussed. Although these results were obtained based on PS-FBG, they are also applicable to a normal FBG sensor or even an optical fiber sensor, due to the identical physical changes induced by ultrasonic waves in all three. Thus, these results are useful for applications of optical fiber sensors in non-destructive testing and structural health monitoring.

  11. A Fiber Bragg Grating Temperature Sensor for 2-400 K

    Energy Technology Data Exchange (ETDEWEB)

    Zaynetdinov, Madrakhim; See, Erich M.; Geist, Brian; Ciovati, Gianluigi; Robinson, Hans D.; Kochergin, Vladimir

    2015-03-01

    We demonstrate fiber optic, multiplexible temperature sensing using a fiber Bragg grating (FBG) with an operational range of 2-400 K, and a temperature resolution better than 10 mK for temperatures < 12 K. This represents a significant reduction in the lowest usable temperature as well as a significant increase in sensitivity at cryogenic temperatures compared with previously reported multiplexible solutions. This is accomplished by mounting the section of the fiber with a FBG on a polytetrafluoroethylene coupon, which has a non-negligible coefficient of thermal expansion down to < 4 K. The sensors exhibit a good stability over multiple temperature cycles and acceptable sensor-to-sensor repeatability. Possible applications for this sensor include distributed temperature sensing across superconducting elements and cryogenic temperature measurements in environments where electrical measurements are impractical or unsafe.

  12. Strain fiber sensor based on beat frequency with chirped fiber Bragg grating

    Science.gov (United States)

    Wang, Xu; Zhang, Haojie; Wen, Quan; Chen, Longfei; Wang, Fang; Liu, Yufang; Yu, Kun

    2016-07-01

    We propose a strain fiber sensor that is interrogated via longitudinal mode beat frequency with a linear chirped fiber Bragg grating (CFBG). Unlike conventional sensors, in the proposed sensor, the CFBG is used to convert wavelength changes into resonant cavity length changes. Further, the beat frequency stability of the fiber laser is fully utilized to significantly improve measurement accuracy. Consequently, because cavity changes account for 5.1% of the total cavity length, the measurement accuracy can be as large as 7.06×10-7 ɛ-i.e., approximately five times greater than the accuracy obtained by stretching the resonant cavity fiber. The maximum experimental strain error range is ±14.5 μɛ.

  13. Study on Multiplexing Ability of Identical Fiber Bragg Gratings in a Single Fiber

    Institute of Scientific and Technical Information of China (English)

    LIU Jiansheng; ZHANG Jing; LI Xin; ZHENG Zheng

    2011-01-01

    The multiplexing ability of a novel multiplexing fiber Bragg grating(FBG)method based on Optical Time Domain Reflecto meter(OTDR)and Time Division Multiplexing TDM technologies has been theoretically analyzed and studied.This method permits the interrogation of hundreds of identical FBGs with low reflectivity in a single fiber,making the FBG sensors more applicable in the aerospace health monitoring engineering.The analysis shows that the multiplexing ability can be greatly improved if the FBG reflectivity is sufficiently low.And hence,an inexpensive large-scale distributed sensing system based on this method can be realized.When evaluating the multiplexing ability of this system,we propose for the first time that the interference effect of multi-reflections among FBGs should be taken into consideration.

  14. Fiber Bragg grating dynamic strain sensor using an adaptive reflective semiconductor optical amplifier source.

    Science.gov (United States)

    Wei, Heming; Tao, Chuanyi; Zhu, Yinian; Krishnaswamy, Sridhar

    2016-04-01

    In this paper, a reflective semiconductor optical amplifier (RSOA) is configured to demodulate dynamic spectral shifts of a fiber Bragg grating (FBG) dynamic strain sensor. The FBG sensor and the RSOA source form an adaptive fiber cavity laser. As the reflective spectrum of the FBG sensor changes due to dynamic strains, the wavelength of the laser output shifts accordingly, which is subsequently converted into a corresponding phase shift and demodulated by an unbalanced Michelson interferometer. Due to the short transition time of the RSOA, the RSOA-FBG cavity can respond to dynamic strains at high frequencies extending to megahertz. A demodulator using a PID controller is used to compensate for low-frequency drifts induced by temperature and large quasi-static strains. As the sensitivity of the demodulator is a function of the optical path difference and the FBG spectral width, optimal parameters to obtain high sensitivity are presented. Multiplexing to demodulate multiple FBG sensors is also discussed. PMID:27139682

  15. Structural Health Monitoring of Superconducting Magnets at CERN Using Fiber Bragg Grating Sensors

    CERN Document Server

    Chiuchiolo, A; Perez, J C; Bajas, H; Guinchard, M; Giordano, M; Breglio, G; Consales, M; Cusano, A

    2014-01-01

    The use of Fiber Bragg Grating sensors is becoming particularly challenging for monitoring different parameters in extreme operative conditions such as ultra-low temperatures, high electromagnetic fields and strong mechanical stresses. This work reports the use of the FBG for a new generation of accelerator magnets with the goal to develop an adequate sensing technology able to provide complementary or alternative information to the conventional strain gauges through the whole service life of the magnet. The study is focused on the mechanical performances of the magnet structure, which has to preserve the sensitive coils from any damage during the entire magnet fabrication process preventing even microscopic movements of the winding that can eventually initiate a transition from superconducting to normal conducting state of the material used (called in the specific literature as “quench”). The FBGs have been glued on the aluminium structure of two magnets prototypes by using an adhesive suitable for cryog...

  16. Transmission comb of a distributed Bragg reflector with two surface dielectric gratings

    KAUST Repository

    Zhao, Xiaobo

    2016-02-19

    The transmission behaviour of a distributed Bragg reector (DBR) with surface dielectric gratings on top and bottom is studied. The transmission shows a comb-like spectrum in the DBR band gap, which is explained in the Fano picture. The number density of the transmission peaks increases with increasing number of cells of the DBR, while the ratio of the average full width at half maximum to the corresponding average free spectral range, being only few percent for both transversal electric and magnetic waves, is almost invariant. The transmission peaks can be narrower than 0.1 nm and are fully separated from each other in certain wavebands. We further prove that the transmission combs are robust against randomness in the heights of the DBR layers. Therefore, the proposed structure is a candidate for an ultra-narrow-band multichannel filter or polarizer.

  17. Field tests of Fibre Bragg Grating sensors incorporated into CFRP for Railway Bridge strengthening condition monitoring

    DEFF Research Database (Denmark)

    Täljsten, Björn; Kerrouche, Abdelfathe; Leighton, J;

    2008-01-01

    This paper reports results obtained from an unusual situation in structural monitoring – a ‘test-to-destruction’, measuring strain using a series of fibre Bragg gratings (FBG) sensors on a decommissioned concrete Railway Bridge in Örnsköldsvik, Sweden. The study formed part of the FP6 EU funded...... the study, the FBG sensors were continuously monitored, allowing the incremental increases in the strain to be seen and through the yield point of the carbon composite reinforcement. The sensors were able to follow the resulting induced changes in strain of over a range in excess of 4000µε. The measurements...... reinforcements used in remedial repair and for monitoring better the performance of existing bridge structures....

  18. Hollow core MOEMS Bragg grating microphone for distributed and remote sensing

    DEFF Research Database (Denmark)

    Reck, Kasper; Østergaard, Christian; Thomsen, Erik Vilain;

    2011-01-01

    We present the design and fabrication of a completely new high sensitivity all-optical frequency modulated MOEMS microphone for distributed and remote sensing applications. Due to immunity to electromagnetic interference, no parasitic capacitances and easy wavelength division multiplexing (WDM......) combined with the low transmission loss of modern optical fibers [1], frequency modulated optical sensors are ideal for remote and distributed sensing. While several all-optical and high sensitivity MOEMS pressure sensors are found in literature, these sensors are typically based on amplitude (intensity......) modulation. Amplitude modulation is inherently sensitive to transmission loss and requires a unique transmission line for each sensor. Though fiber Bragg gratings (FBGs) are based on frequency modulation the relatively large dimensions of optical fibers and their low refractive index modulation makes them...

  19. Rebar corrosion monitoring in concrete structure under salt water enviroment using fiber Bragg grating

    Science.gov (United States)

    Pan, Yuheng; Liu, Tiegen; Jiang, Junfeng; Liu, Kun; Wang, Shuang; He, Pan; Yan, Jinlin

    2015-08-01

    Monitoring corrosion of steel reinforcing bars is critical for the durability and safety of reinforced concrete structures. Corrosion sensors based on fiber optic have proved to exhibit meaningful benefits compared with the conventional electric ones. In recent years, Fiber Bragg Grating (FBG) has been used as a new kind of sensing element in an attempt to directly monitor the corrosion in concrete structure due to its remarkable advantages. In this paper, we present a novel kind of FBG based rebar corrosion monitoring sensor. The rebar corrosion is detected by volume expansion of the corroded rebar by transferring it to the axial strain of FBG when concrete structure is soaked in salt water. An accelerated salt water corrosion test was performed. The experiment results showed the corrosion can be monitored effectively and the corrosion rate is obtained by volume loss rate of rebar.

  20. Note: Dissolved hydrogen detection in power transformer oil based on chemically etched fiber Bragg grating.

    Science.gov (United States)

    Jiang, Jun; Ma, Guo-ming; Song, Hong-tu; Zhou, Hong-yang; Li, Cheng-rong; Luo, Ying-ting; Wang, Hong-bin

    2015-10-01

    A fiber Bragg grating (FBG) sensor based on chemically etched cladding to detect dissolved hydrogen is proposed and studied in this paper. Low hydrogen concentration tests have been carried out in mixed gases and transformer oil to investigate the repeatability and sensitivity. Moreover, to estimate the influence of etched cladding thickness, a physical model of FBG-based hydrogen sensor is analyzed. Experimental results prove that thin cladding chemically etched by HF acid solution improves the response to hydrogen detection in oil effectively. At last, the sensitivity of FBG sensor chemically etched 16 μm could be as high as 0.060 pm/(μl/l), increased by more than 30% in comparison to un-etched FBG. PMID:26521000

  1. Temperature-independent gas refractometer based on an S-taper fiber tailored fiber Bragg grating

    Science.gov (United States)

    Shao, Zhihua; Qiao, Xueguang; Bao, Weijia; Rong, Qiangzhou

    2016-09-01

    A fiber Bragg grating (FBG)-based gas refractometer is proposed and demonstrated experimentally. The configuration consists of a short section of S-type taper incorporated in the upstream of a FBG. The S-taper is capable to couple the core mode to cladding modes into the downstream single mode fiber (SMF), and the low-order cladding modes can be reflected back to the fiber core via the FBG. Because of the recoupling efficiency depending on surrounding refractive index (SRI), the reflection power of the device presents high response to gas RI change with the sensitivity of 172.7 dB/RIU. This power-referenced RI measurement and wavelength-referenced temperature measurement have been achieved via selective cladding modes monitoring.

  2. Silicon-based on-chip electrically tunable sidewall Bragg grating Fabry-Perot filter.

    Science.gov (United States)

    Zhang, Weifeng; Ehteshami, Nasrin; Liu, Weilin; Yao, Jianping

    2015-07-01

    We report the design, fabrication, and testing of a silicon-based on-chip electrically tunable sidewall Bragg grating Fabry-Perot filter. Spectral measurement shows that the filter has a narrow notch in reflection of approximately 46 pm, a Q-factor of 33,500, and an extinction ratio of 16.4 dB. DC measurement shows that the average central wavelength shift rates with forward and reverse bias are -1.15  nm/V and 4.2  pm/V, respectively. Due to strong light confinement in the Fabry-Perot cavity, the electro-optic frequency response shows that the filter has a 3-dB modulation bandwidth of ∼5.6  GHz. The performance of using the filter to perform modulation of a 3.5  Gb/s2(7)-1 nonreturn-to-zero pseudorandom binary sequence is evaluated.

  3. Sensitivity improvement of a fibre Bragg grating pH sensor with elastomeric coating

    International Nuclear Information System (INIS)

    A new optical pH sensor based on fibre Bragg grating (FBG) is demonstrated. The sensor consists of a FBG coated with pH sensitive hydrogel. The sensing was performed through the detection of wavelength shifts resulting from the induced strain on the FBG due to mechanical expansion of the hydrogel. An elastomeric coating was applied before the hydrogel coating to improve the sensitivity. The sensor performance was investigated by simulating the hydrogel swelling and the strain induced on the FBG. The swelling of hydrogel due to pH change was modelled using a free-energy function and was solved using the finite element method. With silicone rubber as the elastomer material, the results show that the sensitivity was improved by up to 66% compared to that of the FBG pH sensor without elastomeric coating

  4. Aviation Fuel Gauging Sensor Utilizing Multiple Diaphragm Sensors Incorporating Polymer Optical Fiber Bragg Gratings

    DEFF Research Database (Denmark)

    Marques, C. A. F.; Pospori, A.; Saez-Rodriguez, D.;

    2016-01-01

    A high-performance fuel gauging sensor is described that uses five diaphragm-based pressure sensors, which are monitored using a linear array of polymer optical fiber Bragg gratings. The sensors were initially characterized using water, revealing a sensitivity of 98 pm/cm for four of the sensors...... and 86 pm/cm for the fifth. The discrepancy in the sensitivity of the fifth sensor has been explained as being a result of the annealing of the other four sensors. Initial testing in JET A-1 aviation fuel revealed the unsuitability of silicone rubber diaphragms for prolonged usage in fuel. A second set...... of sensors manufactured with a polyurethane-based diaphragm showed no measurable deterioration over a three month period immersed in fuel. These sensors exhibited a sensitivity of 39 pm/cm, which is less than the silicone rubber devices due to the stiffer nature of the polyurethane material used....

  5. Temperature-Insensitive Chemical Sensor with Twin Bragg Gratings in an Optical Fibre

    Institute of Scientific and Technical Information of China (English)

    SANG Xin-Zhu; YU Chong-Xiu; YAN Bin-Bin; MA Jian-Xin; MENG Zhao-Fang; Mayteevarunyoo T.; LU Nai-Guang

    2006-01-01

    To reduce temperature sensitivity of the fibre Bragg grating (FBG) chemical sensor, a simple method is proposed by measuring the peak wavelength difference between an etched FBG and an un-etched one in an optical fibre.Thermal characteristics and chemical sensitivity of the sensor are experimentally investigated. The experimental results indicate that the etched FBG and the rest one have almost the same thermal response, and concentration changes of the surrounding chemical solutions can be detected by measuring the peak wavelength difference between them. The sensor has been used to measure the concentrations of propylene glycol solutions and sugar solutions, and it could detect 0.7% and 0.45% concentration changes for them with an optical spectrum analyser in resolution of 10pm.

  6. High-temperature measurement using Cu-plating fiber Bragg grating for metal smart structure applications

    Science.gov (United States)

    Chang, Tianying; Jia, Lei; Sui, Qingmei; Cui, Hong-Liang

    2014-03-01

    High-temperature experiments for electroless Cu-plating Fiber Bragg Grating (FBG) indicate that Cu-plating FBG can measure high-temperature up to (even beyond) 300°C and it has high linearity, accuracy and repeatability. We can control Cu-plating FBG's temperature sensitivity by controlling plating layer's thickness. Temperature sensitivity of FBG with Cu-plating can be improved by more than three times with no less than 300μmthick coating by electroless and electrical Cu-plating. Such FBG can be soldered onto metal structures to get good bonding with the structure. As a result, such fiber sensors can get good protection, and high-temperature monitoring of smart structure is obtained.

  7. Holographic polymer-dispersed liquid crystal Bragg grating integrated inside a solid core photonic crystal fiber

    CERN Document Server

    Zito, Gianluigi

    2013-01-01

    A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a pre-polymer/LC solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG are discussed. Experimental data here presented, demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal phase separation inside the PCF capillaries is examined using scanning electron microscopy, while further discussed.

  8. Flat-Cladding Fiber Bragg Grating Sensors for Large Strain Amplitude Fatigue Tests

    Directory of Open Access Journals (Sweden)

    Xijia Gu

    2010-08-01

    Full Text Available We have successfully developed a flat-cladding fiber Bragg grating sensor for large cyclic strain amplitude tests of up to ±8,000 με. The increased contact area between the flat-cladding fiber and substrate, together with the application of a new bonding process, has significantly increased the bonding strength. In the push-pull fatigue tests of an aluminum alloy, the plastic strain amplitudes measured by three optical fiber sensors differ only by 0.43% at a cyclic strain amplitude of ±7,000 με and 1.9% at a cyclic strain amplitude of ±8,000 με. We also applied the sensor on an extruded magnesium alloy for evaluating the peculiar asymmetric hysteresis loops. The results obtained were in good agreement with those measured from the extensometer, a further validation of the sensor.

  9. Review of the Strain Modulation Methods Used in Fiber Bragg Grating Sensors

    Directory of Open Access Journals (Sweden)

    Kuo Li

    2016-01-01

    Full Text Available Fiber Bragg grating (FBG is inherently sensitive to temperature and strain. By modulating FBG’s strain, various FBG sensors have been developed, such as sensors with enhanced or reduced temperature sensitivity, strain/displacement sensors, inclinometers, accelerometers, pressure meters, and magnetic field meters. This paper reviews the strain modulation methods used in these FBG sensors and categorizes them according to whether the strain of an FBG is changed evenly. Then, those even-strain-change methods are subcategorized into (1 attaching/embedding an FBG throughout to a base and (2 fixing the two ends of an FBG and (2.1 changing the distance between the two ends or (2.2 bending the FBG by applying a transverse force at the middle of the FBG. This review shows that the methods of “fixing the two ends” are prominent because of the advantages of large tunability and frequency modulation.

  10. Spectra power and bandwidth of fiber Bragg grating under influence of gradient strain

    Science.gov (United States)

    Liu, Qinpeng; Qiao, Xueguang; Jia, Zhen'an; Fu, Haiwei

    2016-09-01

    The reflective spectrum power and the bandwidth of the fiber Bragg grating (FBG) under gradient strain are researched and experimentally demonstrated. The gradient strain is applied on the FBG, which can induce FBG bandwidth broadening, resulting in the variation of reflective power. Based on the coupled-mode theory and transfer matrix method, the segmental linear relationship between the gradient strain, the reflective power, and the bandwidth is simulated and analyzed, and the influence of the FBG length on the reflective spectrum is analyzed. In the experiment, the strict gradient stain device is designed; the experimental results indicate that the reflective optic power and the bandwidth of the FBG under gradient stain are concerned with the length of the FBG. Experimental results are well consistent with the theoretical analysis, which have important guiding significance in the FBG dynamic sensing.

  11. Design and implementation of ROADM based on fiber Bragg grating and optical switch

    Science.gov (United States)

    Zheng, Liming; Zeng, Simin; Wang, Faqiang

    2007-11-01

    With the development of optical communication technology, all-optical network is promising in next generation networks. Characterized by good transparency, wavelength routing, compatibility and scalability, all-optical network has become the most promising candidate for future high-capacity network. And reconfigurable optical add/drop multiplexer (ROADM) has been regarded as one of the key equipments of the intelligent WDM optical communication network. In this paper, we compare several design methods of ROADM, and introduce the design and implementation of ROADM based on fiber Bragg grating (FBG) and optical switch (OSW). We also propose the new idea of FBGs OSW composed OSW and FBG collimator, which is the integration package of FBGs and collimator. Benefited from the filter characteristics of FBGs and the selectivity of OSW, the performance of ROADM can be optimized. In addition, the ROADM has been tested and analyzed.

  12. Compact bending sensor based on a fiber Bragg grating in an abrupt biconical taper.

    Science.gov (United States)

    Cui, Wei; Si, Jinhai; Chen, Tao; Hou, Xun

    2015-05-01

    We propose and experimentally demonstrate a compact bending sensor. The head of the sensor is only 0.8 mm in length, and consists of an abrupt biconical fiber taper formed using a conventional fusion splicer, in which a fiber Bragg grating (FBG) is inscribed using a femtosecond laser. The biconical taper incorporating the FBG can couple light from the cladding to the backward-propagating core mode, which realizes an interferometer in reflection-mode. Bending of the structure can be detected from the contrast change of interference fringes. A configuration to measure curvature is investigated to demonstrate the sensing characteristics. The temperature cross-sensitivity of the sensor is studied, and the results demonstrate that it is insensitive to temperature. PMID:25969198

  13. Dynamic assessment of women pelvic floor function by using a fiber Bragg grating sensor system

    Science.gov (United States)

    Ferreira, Luis A.; Araújo, Francisco M.; Mascarenhas, Teresa; Natal Jorge, Renato M.; Fernandes, António A.

    2006-02-01

    We present a novel sensing system consisting of an intravaginal probe and an optoelectronic measurement unit, which allows an easy, comfortable and quantitative dynamic evaluation of women pelvic floor muscle strength. The sensing probe is based on a silicone cylinder that transduces radial muscle pressure into axial load applied to a fiber Bragg grating strain sensor. The performance of a first sensor probe prototype with temperature referentiation and of the autonomous, portable optoelectronic measurement unit with data logging capabilities and graphical user interface is disclosed. The presented results refer to an ongoing collaboration work between researchers from the Medical, Optoelectronics and Mechanical areas, directed to the development of equipment that can assist in medical practice and help in the research of primary mechanisms responsible for several pelvic floor disorders, in particular urogenital prolapses.

  14. Hydrogel-coated fiber Bragg grating sensor for pH monitoring

    Science.gov (United States)

    Pabbisetti, Vayu Nandana Kishore; Madhuvarasu, Sai Shankar

    2016-06-01

    We present a fiber-optic wavelength-modulated sensor for pH applications. Fiber Bragg grating (FBG) is functionalized with a stimulus-responsive hydrogel that induces a strain on FBG due to mechanical expansion of the gel in response to ambient pH changes. The gel is synthesized from the blends of poly (vinyl alcohol)/poly (acrylic acid). The induced strain results in a shift of FBG reflected peak that is monitored by an interrogator. The sensor system shows good linearity in the acidic pH range of 3 to 7 with a sensitivity of 12.16 pm/pH. In addition, it shows good repeatability and oscillator behavior, which proves it to be fit for pH sensing applications.

  15. Crack Growth Monitoring by Embedded Optical Fibre Bragg Grating Sensors: Fibre Reinforced Plastic Crack Growing Detection

    DEFF Research Database (Denmark)

    Pereira, Gilmar Ferreira; Mikkelsen, Lars Pilgaard; McGugan, Malcolm

    2015-01-01

    caused by the crack, and to correlate with the FBG sensor. A Material-Sensor model was developed in order to predict the sensor output response under a crack/delamination situation, which can be used as an analysis tool for future application of this measurement technology in more complex structures.......This article presents a novel method to asses a crack growing/damage event in fibre reinforced plastic, or adhesive using Fibre Bragg Grating (FBG) sensors embedded in a host material. Different features of the crack mechanism that induce a change in the FBG response were identified. Double...... Cantilever Beams specimens made with glass fibre glued with structural adhesive, were instrumented with an array of FBG sensors embedded in the material and tested using an experimental fracture procedure. A digital image correlation technique was used to determine the presence of the specific phenomena...

  16. Detuned Plasmonic Bragg Grating Sensor Based on a Defect Metal-Insulator-Metal Waveguide

    Science.gov (United States)

    Qu, Shinian; Song, Ci; Xia, Xiushan; Liang, Xiuye; Tang, Baojie; Hu, Zheng-Da; Wang, Jicheng

    2016-01-01

    A nanoscale Bragg grating reflector based on the defect metal-insulator-metal (MIM) waveguide is developed and numerically simulated by using the finite element method (FEM). The MIM-based structure promises a highly tunable broad stop-band in transmission spectra. The narrow transmission window is shown to appear in the previous stop-band by changing the certain geometrical parameters. The central wavelengths can be controlled easily by altering the geographical parameters. The development of surface plasmon polarition (SPP) technology in metallic waveguide structures leads to more possibilities of controlling light at deep sub-wavelengths. Its attractive ability of breaking the diffraction limit contributes to the design of optical sensors. PMID:27240381

  17. Note: A concrete erosion sensor based on a chirped fibre optic Bragg grating.

    Science.gov (United States)

    Kanopoulos, Patrick; Xia, Kaiwen; Gu, Xijia; Amirchoupani, Ardavan; Yao, Wei

    2015-12-01

    Erosion of concrete surfaces in major civil structures is a common problem, which in certain circumstances can undermine the structural and operational integrities of the structure. The manual monitoring of the erosion process can be difficult and dangerous under certain circumstances (such as within hydrotunnels and spillways of dams). This paper describes a concrete erosion sensor based on a chirped fibre Bragg grating (FBG) which is able to monitor the extent of concrete erosion at a single point to sub-millimetre accuracy. The chirped FBG length embedded below the concrete surface decreases as a result of concrete erosion and consequently the reflected light spectrum bandwidth narrows. A simple procedure is presented to determine the extent of erosion, and this procedure is applied to an experimental demonstration of the sensing device.

  18. Flextensional fiber Bragg grating-based accelerometer for low frequency vibration measurement

    Institute of Scientific and Technical Information of China (English)

    Jinghua Zhang; Xueguang Qiao; Manli Hu; Zhongyao Feng; Hong Gao; Yang Yang; Rui Zhou

    2011-01-01

    @@ The intelligent structural health monitoring method,which uses a fiber Bragg grating(FBG)sensor,is a new approach in the field of civil engineering.However,it lacks a reliable FBG-based accelerometer for taking structural low frequency vibration measurements.In this letter,a flextensional FBG-based accelerometer is proposed and demonstrated.The experimental results indicate that the natural frequency of the developed accelerometer is 16.7 Hz,with a high sensitivity of 410.7 pm/g.In addition,it has a broad and flat response over low frequencies ranging from 1 to 10 Hz.The natural frequency and sensitivity of the accelerometer can be tuned by adding mass to tailor the sensor performance to specific applications.Experimental results are presented to demonstrate the good performance of the proposed FBG-based accelerometer.These results show that the proposed accelerometer is satisfactory for low frequency vibration measurements.%The intelligent structural health monitoring method, which uses a fiber Bragg grating {FBG} sensor, ie a new approach in the field of civil engineering. However, it lacks a reliable FBG-based accelerometer for taking structural low frequency vibration measurements. In this letter, a flextensional FBG-based accelerometer is proposed and demonstrated. The experimental results indicate that the natural frequency of the developed accelerometer is 16.7 Hz, with a high sensitivity of 410.7 pm/g. In addition, it has a broad and flat response over low frequencies ranging from 1 to 10 Hz. The natural frequency and sensitivity of the accelerometer can be tuned by adding mass to tailor the sensor performance to specific applications. Experimental results are presented to demonstrate the good performance of the proposed FBG-based accelerometer. These results show that the proposed accelerometer is satisfactory for low frequency vibration measurements.

  19. Influence of Fiber Bragg Grating Spectrum Degradation on the Performance of Sensor Interrogation Algorithms

    Directory of Open Access Journals (Sweden)

    Alfredo Lamberti

    2014-12-01

    Full Text Available The working principle of fiber Bragg grating (FBG sensors is mostly based on the tracking of the Bragg wavelength shift. To accomplish this task, different algorithms have been proposed, from conventional maximum and centroid detection algorithms to more recently-developed correlation-based techniques. Several studies regarding the performance of these algorithms have been conducted, but they did not take into account spectral distortions, which appear in many practical applications. This paper addresses this issue and analyzes the performance of four different wavelength tracking algorithms (maximum detection, centroid detection, cross-correlation and fast phase-correlation when applied to distorted FBG spectra used for measuring dynamic loads. Both simulations and experiments are used for the analyses. The dynamic behavior of distorted FBG spectra is simulated using the transfer-matrix approach, and the amount of distortion of the spectra is quantified using dedicated distortion indices. The algorithms are compared in terms of achievable precision and accuracy. To corroborate the simulation results, experiments were conducted using three FBG sensors glued on a steel plate and subjected to a combination of transverse force and vibration loads. The analysis of the results showed that the fast phase-correlation algorithm guarantees the best combination of versatility, precision and accuracy.

  20. Fabrication of deuterium-loaded fiber Bragg grating and its spectral characteristics in thermal annealing

    Science.gov (United States)

    Shih, MingChang; Wang, C. C.; Yu, Cheng-Tsang; Chuang, Tung J.

    2000-07-01

    Previous results showed that the non-reversible (hystersis loop) of Bragg wave length shifting in thermal cycling of the Fiber Bragg Grating which is a high germanium doped optical fiber and high pressure hydrogen loaded was due to the diffusion out of the H2 residue in thermal annealing. In addition, the O-H absorption peak (1.38nm) causes signal attenuation and stability problem in FBG applications. We demonstrated up to 250 degree(s) C. The spectrum characteristics of the D2 loaded FBG compared to the H2 loaded FBG is presented. In general, (Delta) (Lambda) B of the D2 loaded FBG is narrower than H2 loaded, and (Lambda) B of the D2 loaded FBG is more stable than H2 loaded in thermal annealing. A model base on the UV photo-induced index change in the BFG core with D2 and H2 loaded to explain the spectrum characteristics between D2 and H2 loaded FBG is discussed.

  1. Influence of Fiber Bragg Grating Spectrum Degradation on the Performance of Sensor Interrogation Algorithms

    Science.gov (United States)

    Lamberti, Alfredo; Vanlanduit, Steve; De Pauw, Ben; Berghmans, Francis

    2014-01-01

    The working principle of fiber Bragg grating (FBG) sensors is mostly based on the tracking of the Bragg wavelength shift. To accomplish this task, different algorithms have been proposed, from conventional maximum and centroid detection algorithms to more recently-developed correlation-based techniques. Several studies regarding the performance of these algorithms have been conducted, but they did not take into account spectral distortions, which appear in many practical applications. This paper addresses this issue and analyzes the performance of four different wavelength tracking algorithms (maximum detection, centroid detection, cross-correlation and fast phase-correlation) when applied to distorted FBG spectra used for measuring dynamic loads. Both simulations and experiments are used for the analyses. The dynamic behavior of distorted FBG spectra is simulated using the transfer-matrix approach, and the amount of distortion of the spectra is quantified using dedicated distortion indices. The algorithms are compared in terms of achievable precision and accuracy. To corroborate the simulation results, experiments were conducted using three FBG sensors glued on a steel plate and subjected to a combination of transverse force and vibration loads. The analysis of the results showed that the fast phase-correlation algorithm guarantees the best combination of versatility, precision and accuracy. PMID:25521386

  2. Fiber Bragg gratings in heterogeneous multicore fiber for directional bending sensing

    Science.gov (United States)

    Zhang, Hailiang; Wu, Zhifang; Shum, Perry Ping; Wang, Ruoxu; Quyen Dinh, Xuan; Fu, Songnian; Tong, Weijun; Tang, Ming

    2016-08-01

    We present the fabrication of fiber Bragg gratings (FBGs) in a trench-assisted heterogeneous multicore fiber (MCF). Two obviously different Bragg reflection peaks are obtained due to the slight difference of refractive indices between the center core and the outer cores. To investigate the reflections of the two FBGs simultaneously, only a segment of multimode fiber is inserted between the lead-in single mode fiber and the MCF. The experimental results confirm that the curvature sensitivity of the FBG in the outer core is a sinusoidal function of the bending orientation angle. The maximum linear curvature sensitivity is about 0.128 nm/m‑1. The cross sensitivity to temperature or externally applied axial strain can be eliminated by discriminating the different responses of FBGs inscribed in outer cores and the center core. Thus this MCF with FBGs can be utilized as a directional bending sensor. Moreover, the proposed sensor offers several advantages, such as low cost and flexibility in fabrication.

  3. Dispersion compensation of fiber Bragg gratings in 3100 km high speed optical fiber transmission system

    Institute of Scientific and Technical Information of China (English)

    Li PEI; Tigang NING; Fengping YAN; Xiaowei DONG; Zhongwei TAN; Yan LIU; Shuisheng JIAN

    2009-01-01

    By optimizing the fabrication process of the chirped optical fiber Bragg grating (CFBG), some key problems of CFBG are solved, such as fabrication repetition, temperature stability, group delay ripple (GDR), fluctuation of the reflection spectrum, polarization mode dispersion (PMD), interaction of cascaded CFBG, and so on. The CFBG we fabricated can attain a temperature coefficient less than 0.0005 nm/℃, and the smoothed GDR and the fluctuation of the reflection spectrum are smaller than 10ps and 0.5dB, respec-tively. The PMD of each CFBG is less than 1 ps and the dispersion of each grating is larger than -2600 ps/(nm·km). With dispersion compensated by the CFBGs we fabricated, a 13×10 Gbit/s 3100 km ultra long G.652 fiber transmission system is successfully imple-mented without electric regenerator. The bit error rate (BER) of the system is below 10-4 without forward error correction (FEC); when FEC is added, the BER is below 10-12. The power penalty of the carrier-suppressed return-to-zero (CSRZ) code transmission system is only 2.5 dB.

  4. Digital monitoring and health diagnosis for mechanical equipment operation safety based on fiber Bragg grating sensor

    Institute of Scientific and Technical Information of China (English)

    Zude ZHOU; Desheng JIANG; Quan LIU

    2009-01-01

    This paper introduces fiber Bragg grating (FBG) based on a fiber optic grating sensor developed to be embedded on mechanical equipment for digital monitoring and health diagnosis. The theoretical and experimental researches on the new-style FBG sensor (FBGS) technology, high-speed demodulation, and data transmission are discussed. The transmission characteristics between the FBG and the detection interface, modeling and compensation method for online distributed multi-parameter digital monitoring and methods for data processing, synchronous sampling, and long-term dynamic digital monitoring using embedded technology are also presented. The acquired information by an FBGS can be used for the optimization of maintenance schedules and refinement of mechanical equipment design. It is a chal-lenge to gather real-time data from components working at high speed and in a severe environment of high temperature, high pressure, and high rotation speed. Currently, there are no sensors or technologies available for digital monitoring and health diagnosis under this rigorous situation for use in mechanical engineering operation safety. As a result, this paper introduces an online distributed and integrated digital monitoring system and health diagnosis. The new principle and new method will contribute to modem measurements in science and technology, mechanical engineering, and large mechanical equipment operation safety.

  5. High brightness sub-nanosecond Q-switched laser using volume Bragg gratings

    Science.gov (United States)

    Anderson, Brian M.; Hale, Evan; Venus, George; Ott, Daniel; Divliansky, Ivan; Glebov, Leonid

    2016-03-01

    The design of Q-switched lasers capable of producing pulse widths of 100's of picoseconds necessitates the cavity length be shorter than a few centimeters. Increasing the amount of energy extracted per pulse requires increasing the mode area of the resonator that for the same cavity length causes exciting higher order transverse modes and decreasing the brightness of the output radiation. To suppress the higher order modes of these multimode resonators while maintaining the compact cavity requires the use of intra-cavity angular filters. A novel Q-switched laser design is presented using transmitting Bragg gratings (TBGs) as angular filters to suppress the higher order transverse modes. The laser consists of a 5 mm thick slab of Nd:YAG, a 3 mm thick slab of Cr:YAG with a 20% transmission, one TBG aligned to suppress the higher order modes along the x-axis, and a 40% output coupler. The gratings are recorded in photo-thermo-refractive (PTR) glass, which has a high damage threshold that can withstand both the high peak powers and high average powers present within the resonator. Using a 4.1 mrad TBG in a 10.8 mm long resonator with an 800μm x 400 μm pump beam, a nearly diffraction limited beam quality of M2 = 1.3 is obtained in a 0.76 mJ pulse with a pulse width of 614 ps.

  6. Effect of interstitial air holes on Bragg gratings in photonic crystal fibre with a Ge-doped core

    Institute of Scientific and Technical Information of China (English)

    Zhang Hui-Jia; Li Shu-Guang; Hou Lan-Tian

    2009-01-01

    The effect of interstitial air holes on Bragg gratings in photonic crystal fibre (PCF) with a Ge-doped core is numerically investigated by using thc beam propagation method (BPM). It is shown that the interstitial air holes (IAHs) can make Bragg resonance wavelength λ3 shift a little towards short wavelengths and incrcase λB - λ1 (the wavelength spacing between the main peak with Bragg resonance wavelength λB and the first side peak with wavelength λ1) and the coupling coefficient κ of Bragg resonance. Moreover, when the ratio of air hole diameter (d) to pitch (A),d/A, is small, IAHs can suppress the cladding mode resonance. When d/A is large, IAHs increase the number of mode that could strongly interact with the fundamental mode. By comparing the transmission spectral characteristics of PCF-based fibrc Bragg grating (FBG) with IAHs with those without IAtIs at the same air-filling fraction, it is clarified that the change of transmission spectral characteristics of PCF-based FBG with IAHs is not due to a simple change in air-filling fraction. It is also closely related to the distribution of interstitial air holes.

  7. Using a Fiber Loop and Fiber Bragg Grating as a Fiber Optic Sensor to Simultaneously Measure Temperature and Displacement

    Science.gov (United States)

    Chang, Yao-Tang; Yen, Chih-Ta; Wu, Yue-Shiun; Cheng, Hsu-Chih

    2013-01-01

    This study integrated a fiber loop manufactured by using commercial fiber (SMF-28, Corning) and a fiber Bragg grating (FBG) to form a fiber optic sensor that could simultaneously measure displacement and temperature. The fiber loop was placed in a thermoelectric cooling module with FBG affixed to the module, and, consequently, the center wavelength displacement of FBG was limited by only the effects of temperature change. Displacement and temperature were determined by measuring changes in the transmission of optical power and shifts in Bragg wavelength. This study provides a simple and economical method to measure displacement and temperature simultaneously. PMID:23681094

  8. Using a Fiber Loop and Fiber Bragg Grating as a Fiber Optic Sensor to Simultaneously Measure Temperature and Displacement

    Directory of Open Access Journals (Sweden)

    Hsu-Chih Cheng

    2013-05-01

    Full Text Available This study integrated a fiber loop manufactured by using commercial fiber (SMF-28, Corning and a fiber Bragg grating (FBG to form a fiber optic sensor that could simultaneously measure displacement and temperature. The fiber loop was placed in a thermoelectric cooling module with FBG affixed to the module, and, consequently, the center wavelength displacement of FBG was limited by only the effects of temperature change. Displacement and temperature were determined by measuring changes in the transmission of optical power and shifts in Bragg wavelength. This study provides a simple and economical method to measure displacement and temperature simultaneously.

  9. Note: Strain sensitivity comparison between fiber Bragg gratings inscribed on 125 and 80 micron cladding diameter fibers, case study on the solidification monitoring of a photo-curable resin

    Energy Technology Data Exchange (ETDEWEB)

    Maccioni, E. [Dipartimento di Fisica, Università degli Studi di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Istituto Nazionale di Fisica Nucleare (INFN) sez. di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Morganti, M. [Istituto Nazionale di Fisica Nucleare (INFN) sez. di Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Accademia Militare di Livorno, Viale Italia 72, 57100 Livorno (Italy); Brandi, F., E-mail: fernando.brandi@ino.it [Nanophysics Department, Istituto Italiano di Tecnologia, Via Morego 30, 16163 Genova (Italy); Istituto Nazionale di Ottica (INO), Consiglio Nazionale delle Ricerche (CNR), Via G. Moruzzi 1, 56124 Pisa (Italy)

    2015-02-15

    The influence of fiber Bragg grating diameter when measuring strain is investigated and quantified. Two fiber Bragg gratings with bare cladding diameter of 125 μm and 80 μm are produced by excimer laser irradiation through a phase mask, and are used to simultaneously monitor the Bragg wavelength shift due to the strain produced by the solidification of a photo-curable resin during light exposure. It is found that the ratio of the measured strains in the two fiber Bragg gratings is close to the inverse ratio of the fiber’s cladding diameter. These results represent a direct simultaneous comparison between 125 μm and 80 μm diameter fiber Bragg grating strain sensors, and demonstrate the feasibility of strain measurements in photo-curable resins using bare 80 μm cladding diameter fiber Bragg gratings with an increased sensitivity and spatial resolution compared with standard 125 μm diameter fiber Bragg gratings.

  10. In Search of Multi-Peaked Reflective Spectrum with Optic Fiber Bragg Grating Sensor for Dynamic Strain Measurement

    Science.gov (United States)

    Tai, Hsiang

    2006-01-01

    In a typical optic fiber Bragg grating (FBG) strain measurement, unless in an ideal static laboratory environment, the presence of vibration or often disturbance always exists, which often creates spurious multiple peaks in the reflected spectrum, resulting in a non-unique determination of strain value. In this report we attempt to investigate the origin of this phenomenon by physical arguments and simple numerical simulation. We postulate that the fiber gratings execute small amplitude transverse vibrations changing the optical path in which the reflected light traverses slightly and non-uniformly. Ultimately, this causes the multi-peak reflected spectrum.

  11. Numerical and experimental analysis of the modulation of fiber Bragg gratings by low-frequency complex acoustic waves

    Science.gov (United States)

    Silva, Ricardo E.; Franco, Marcos A. R.; Neves, Paulo T.; Bartelt, Hartmut; Pohl, Alexandre A. P.

    2016-07-01

    The acoustically modulated bandwidth of fiber Bragg gratings is simulated and experimentally demonstrated. Finite element and transfer matrix methods are used to investigate a superposition of flexural and longitudinal acoustic waves and the induced complex strain in the grating, for the first time. The results show that the longitudinal strain is suitable to generate a bandwidth-voltage response. The modeling is useful for the design and characterization of acousto-optic modulators, which is attractive for the fast control of several photonic devices.

  12. Phase controlled integrated interferometric single-sideband filter based on planar Bragg gratings implementing photonic Hilbert transform.

    Science.gov (United States)

    Sima, Chaotan; Gates, J C; Rogers, H L; Mennea, P L; Holmes, C; Zervas, M N; Smith, P G R

    2013-03-01

    The monolithically integrated all-optical single-sideband (SSB) filter based on photonic Hilbert transform and planar Bragg gratings is proposed and experimentally demonstrated. An SSB suppression of 12 dB at 6 GHz and sideband switching are achieved via thermal tuning. An X-coupler, photonic Hilbert transformer, flat top reflector, and a micro heater are incorporated in a single silicon-on-silica substrate. The device can be thermally tuned by the micro heater on top of the channel waveguide. The device is fabricated using a combination of direct UV grating writing technology and photolithography. PMID:23455279

  13. Highly tunable Terahertz filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides

    Directory of Open Access Journals (Sweden)

    Kangwen Li

    2013-06-01

    Full Text Available A highly tunable terahertz (THz filter with magneto-optical Bragg grating formed in semiconductor-insulator-semiconductor waveguides is proposed and demonstrated numerically by means of the Finite Element Method. The results reveal that a sharp peak with high Q-value presents in the band gap of Bragg grating waveguide with a defect, and the position of the sharp peak can be modified greatly by changing the intensity of the transverse magnetic field applied to the device. Compared to the situation without magnetic field applied, the shift of the filtered frequency (wavelength reaches up to 36.1 GHz (11.4 μm when 1 T magnetic field is applied. In addition, a simple model to predict the filtered frequency and an effective way to improve the Q-value of the filter are proposed by this paper.

  14. Life cycle strain monitoring in glass fibre reinforced polymer laminates using embedded fibre Bragg grating sensors from manufacturing to failure

    DEFF Research Database (Denmark)

    Nielsen, Michael Wenani; Schmidt, Jacob Wittrup; Høgh, Jacob Herold;

    2013-01-01

    failure. The internal process-induced strain development is investigated through use of different cure schedules and tool/part interactions. The fibre Bragg grating sensors successfully monitor resin flow front progression during infusion, and strain development during curing, representative...... of the different cure temperatures and tool/part interfaces used. Substantial internal process-induced strains develop in the transverse fibre direction, which should be taken into consideration when designing fibre-reinforced polymer laminates. Flexure tests indicate no significant difference in the mechanical......A holistic approach to strain monitoring in fibre-reinforced polymer composites is presented using embedded fibre Bragg grating sensors. Internal strains are monitored in unidirectional E-glass/epoxy laminate beams during vacuum infusion, curing, post-curing and subsequent loading in flexure until...

  15. Enhancement of the sensitivity of a temperature sensor based on Fiber Bragg Gratings via weak value amplification

    CERN Document Server

    Salazar-Serrano, L J; Amaya, W; Sales, S; Pruneri, V; Torres, J P

    2015-01-01

    We present a proof-of-concept experiment aimed at increasing the sensitivity of temperature sensors implemented with Fiber Bragg gratings by making use of a weak value amplification scheme. The technique requires only linear optics elements for its implementation, and appears as a promising method for extending the range of temperatures changes detectable to increasingly lower values than state-of the-art sensors can currently provide. The device implemented here is able to generate a shift of the centroid of the spectrum of a pulse of $\\mathrm{\\sim 0.035\\,nm/^{\\circ}C}$, a nearly fourfold increase in sensitivity over the same Fiber Bragg Grating system interrogated using standard methods.

  16. Tunable Polymer Fiber Bragg Grating (FBG) Inscription: Fabrication of Dual-FBG Temperature Compensated Polymer Optical Fiber Strain Sensors

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole

    2012-01-01

    We demonstrate stable wavelength tunable inscription of polymer optical fiber Bragg gratings (FBGs). By straining the fiber during FBG inscription, we linearly tune the center wavelength over 7 nm with less than 1% strain. Above 1% strain, the tuning curve saturates and we show a maximum tuning o...... of 12 nm with 2.25% strain. We use this inscription method to fabricate a dual-FBG strain sensor in a poly (methyl methacrylate) single-mode microstructured polymer optical fiber and demonstrate temperature compensated strain sensing around 850 nm.......We demonstrate stable wavelength tunable inscription of polymer optical fiber Bragg gratings (FBGs). By straining the fiber during FBG inscription, we linearly tune the center wavelength over 7 nm with less than 1% strain. Above 1% strain, the tuning curve saturates and we show a maximum tuning...

  17. A novel fiber-laser-based fiber Bragg grating strain sensor with high-birefringence Sagnac fiber loop mirror

    Institute of Scientific and Technical Information of China (English)

    Ou Xu; Shaohua Lu; Suchun Feng; Shuisheng Jian

    2008-01-01

    A novel fiber-laser-based strain sensor is proposed and experimentally demonstrated. The laser cavity is composed of a high-birefringence Sagnac fiber loop mirror (HiBi-SFLM) and a fiher Bragg grating (FBG) which also acts as a strain-sensing element. In the linear region of the HiBi-SFI,M reflection spectrum, when the strain applied on the FBG makes the Bragg grating wavelength shift,, the laser output power changes due to reflectivity variation of the HiBi-SFLM. Experimental results show that the laser output power varies ahnost linearly with the applied strain. The measurement of the output power can be performed by a conventional photo-detector.

  18. The sensitivity enhancement of tilted fibre Bragg grating sensors with polarization dependent resonant nano-scale coatings

    CERN Document Server

    Bialiayeu, Aliaksandr

    2015-01-01

    Fibre Bragg grating sensors have emerged as a simple, inexpensive, accurate, sensitive and reliable platform, a viable alternative to the traditional bulkier optical sensor platforms. In this work we present an extensive theoretical analysis of the tilted fibre Bragg grating sensor (TFBG) with a particular focus on its polarization-dependent properties. We have developed a highly efficient computer model capable of providing the full characterization of the TFBG device in less then $3$~minutes for a given state of incident light polarization. As a result, the polarization-dependent spectral response, the field distribution at the sensor surface as well as the fine structure of particular resonances have become accessible for theoretical analysis. As a part of this computer model we have developed a blazingly fast full-vector complex mode solver, capable of handling cylindrical waveguides of an arbitrary complex refractive index profile. Along with the theoretical study we have investigated optical properties ...

  19. A new monitoring method of cable tension of cable-stayed bridge-fiber Bragg grating method

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xu-she; DU Yan-liang; NING Chen-xiao

    2005-01-01

    A new on-line monitoring method based on fiber Bragg grating (FBG) for cable tension of cable-stayed bridge was introduced. The major structure of sensing head using in the test of cable tension is elastic annular. The FBG is attached inflexibility to the exterior surface of annulus and form straight-through sensing head. Sensing headis installed between the anchor device and stow-board of funiculus holes of the cable-stayed bridge. Accompany with the change of the outside pressure, the Bragg center reflective wavelength of optical fiber grating changed correspondingly. According to this characteristic, through demodulating the△λ, the value of the cable tension can be determined. The experiment results and the theory indicate that the test system has simple structure, good stability and linear,wide response capacity, and has no special request for tester, The measurement method for the test of ca ble tension is practical and effective.

  20. Benchmark for Peak Detection Algorithms in Fiber Bragg Grating Interrogation and a New Neural Network for its Performance Improvement

    OpenAIRE

    Aleksander Paterno; Hypolito Kalinowski; Lucas Negri; Ademir Nied

    2011-01-01

    This paper presents a benchmark for peak detection algorithms employed in fiber Bragg grating spectrometric interrogation systems. The accuracy, precision, and computational performance of currently used algorithms and those of a new proposed artificial neural network algorithm are compared. Centroid and gaussian fitting algorithms are shown to have the highest precision but produce systematic errors that depend on the FBG refractive index modulation profile. The proposed neural network displ...

  1. Demonstration of 100 GHz electrically tunable liquid-crystal Bragg gratings for application in dynamic optical networks

    OpenAIRE

    Adikan, F.R.Mahamd; J.C.Gates; Dyadyusha, A.; Major, H.E.; Gawith, C.B.E.; Sparrow, I.J.G.; Emmerson, G.D.; Kaczmarek, M.; P.G.R.Smith

    2007-01-01

    We demonstrate liquid crystal-based integrated optical devices with >140GHz electrical tuning for potential applications in dynamic optical networks. Bragg wavelength tuning covering five 25GHz WDM channel spacings has been achieved with 170V (peak-to-peak) sinusoidal voltages applied across electro-patterned ITO-covered glass electrodes placed 60?m apart. This tunability range was limited only by the initial grating strength and supply voltage level. We also observed two distinct threshold b...

  2. Using a Fiber Loop and Fiber Bragg Grating as a Fiber Optic Sensor to Simultaneously Measure Temperature and Displacement

    OpenAIRE

    Hsu-Chih Cheng; Yue-Shiun Wu; Chih-Ta Yen; Yao-Tang Chang

    2013-01-01

    This study integrated a fiber loop manufactured by using commercial fiber (SMF-28, Corning) and a fiber Bragg grating (FBG) to form a fiber optic sensor that could simultaneously measure displacement and temperature. The fiber loop was placed in a thermoelectric cooling module with FBG affixed to the module, and, consequently, the center wavelength displacement of FBG was limited by only the effects of temperature change. Displacement and temperature were determined by measuring changes in th...

  3. Measurement of Temperature Field for the Spindle of Machine Tool Based on Optical Fiber Bragg Grating Sensors

    OpenAIRE

    Liu, Mingyao; Zhang, Erlong; Zhou, Zude; Tan, Yuegang; Liu, Yi

    2013-01-01

    The change of spindle temperature field is an important factor which influences machining precision. Many methods of spindle temperature field measurement have been proposed. However, most of the methods are based on the electric temperature sensors. There exist some defects (e.g., anti-interference, multiplexing, and stability capacity are poor). To increase the temperature sensitivity and reduce strain sensitivity of the bare Fiber Bragg Grating (FBG) sensor, a cassette packaged FBG sensor ...

  4. Dynamic Strain Measurements on Automotive and Aeronautic Composite Components by Means of Embedded Fiber Bragg Grating Sensors

    OpenAIRE

    Alfredo Lamberti; Gabriele Chiesura; Geert Luyckx; Joris Degrieck; Markus Kaufmann; Steve Vanlanduit

    2015-01-01

    The measurement of the internal deformations occurring in real-life composite components is a very challenging task, especially for those components that are rather difficult to access. Optical fiber sensors can overcome such a problem, since they can be embedded in the composite materials and serve as in situ sensors. In this article, embedded optical fiber Bragg grating (FBG) sensors are used to analyze the vibration characteristics of two real-life composite components. The first component...

  5. Application of Multiscale Fiber Optical Sensing Network Based on Brillouin and Fiber Bragg Grating Sensing Techniques on Concrete Structures

    OpenAIRE

    Xuefeng Zhao; Jie Lu; Ruicong Han; Xianglong Kong; Yanhong Wang; Le Li

    2012-01-01

    The paper reports the application of the distributed optical fiber sensing technology and the FBG sensing technology in bridge strain monitoring; the overall changeable characteristics of the whole structure can be obtained through the distributed optical fiber sensing technology (BOTDA), meanwhile the accurate information of local important parts of the structure can be obtained through the optical fiber Bragg grating sensor (FBG), which can improve the accuracy of the monitoring. FBG sensor...

  6. A Heuristic Fast Method to Solve the Nonlinear Schroedinger Equation in Fiber Bragg Gratings with Arbitrary Shape Input Pulse

    International Nuclear Information System (INIS)

    Using a combination of Runge-Kutta and Jacobi iterative method, we could solve the nonlinear Schroedinger equation describing the pulse propagation in FBGs. By decomposing the electric field to forward and backward components in fiber Bragg grating and utilizing the Fourier series analysis technique, the boundary value problem of a set of coupled equations governing the pulse propagation in FBG changes to an initial condition coupled equations which can be solved by simple Runge-Kutta method.

  7. Tunable continuous-wave dual-wavelength laser by external-cavity superluminescent diode with a volume Bragg grating and a diffraction grating

    Science.gov (United States)

    Zheng, Yujin; Kurita, Takashi; Sekine, Takashi; Kato, Yoshinori; Kawashima, Toshiyuki

    2016-10-01

    We demonstrate the tunable continuous-wave dual-wavelength laser based on a double external-cavity superluminescent diode (SLD). The double external cavity consisted of a volume Bragg grating (VBG) and a diffraction grating bracketing the SLD's two facets. The VBG was used as an output coupler to enable the external-cavity SLD to achieve a stable wavelength. A narrow bandwidth of 0.25 nm was achieved in single-wavelength operation. The diffraction grating served as an end mirror to create another tunable wavelength external cavity for the SLD. A wavelength tuning range of 23 nm was achieved. The laser output of the double external-cavity SLD had a tunable spectral separation with dual-wavelengths from +6.42 to -16.94 nm. An output power of up to 37.7 mW was achieved with a frequency difference of 7.1 THz.

  8. Smart Textile Based on Fiber Bragg Grating Sensors for Respiratory Monitoring: Design and Preliminary Trials.

    Science.gov (United States)

    Ciocchetti, Marco; Massaroni, Carlo; Saccomandi, Paola; Caponero, Michele A; Polimadei, Andrea; Formica, Domenico; Schena, Emiliano

    2015-09-14

    Continuous respiratory monitoring is important to assess adequate ventilation. We present a fiber optic-based smart textile for respiratory monitoring able to work during Magnetic Resonance (MR) examinations. The system is based on the conversion of chest wall movements into strain of two fiber Bragg grating (FBG) sensors, placed on the upper thorax (UT). FBGs are glued on the textile by an adhesive silicon rubber. To increase the system sensitivity, the FBGs positioning was led by preliminary experiments performed using an optoelectronic system: FBGs placed on the chest surface experienced the largest strain during breathing. System performances, in terms of respiratory period (TR), duration of inspiratory (TI) and expiratory (TE) phases, as well as left and right UT volumes, were assessed on four healthy volunteers. The comparison of results obtained by the proposed system and an optoelectronic plethysmography highlights the high accuracy in the estimation of TR, TI, and TE: Bland-Altman analysis shows mean of difference values lower than 0.045 s, 0.33 s, and 0.35 s for TR, TI, and TE, respectively. The mean difference of UT volumes between the two systems is about 8.3%. The promising results foster further development of the system to allow routine use during MR examinations.Continuous respiratory monitoring is important to assess adequate ventilation. We present a fiber optic-based smart textile for respiratory monitoring able to work during Magnetic Resonance (MR) examinations. The system is based on the conversion of chest wall movements into strain of two fiber Bragg grating (FBG) sensors, placed on the upper thorax (UT). FBGs are glued on the textile by an adhesive silicon rubber. To increase the system sensitivity, the FBGs positioning was led by preliminary experiments performed using an optoelectronic system: FBGs placed on the chest surface experienced the largest strain during breathing. System performances, in terms of respiratory period (TR

  9. Fiber Optic Sensors for Health Monitoring of Morphing Airframes. Part 2; Chemical Sensing Using Optical Fibers with Bragg Gratings

    Science.gov (United States)

    Wood, Karen; Brown, Timothy; Rogowski, Robert; Jensen, Brian

    2000-01-01

    Part 1 of this two part series described the fabrication and calibration of Bragg gratings written into a single mode optical fiber for use in strain and temperature monitoring. Part 2 of the series describes the use of identical fibers and additional multimode fibers, both with and without Bragg gratings, to perform near infrared spectroscopy. The demodulation system being developed at NASA Langley Research Center currently requires the use of a single mode optical fiber. Attempts to use this single mode fiber for spectroscopic analysis are problematic given its small core diameter, resulting in low signal intensity. Nonetheless, we have conducted a preliminary investigation using a single mode fiber in conjunction with an infrared spectrometer to obtain spectra of a high-performance epoxy resin system. Spectra were obtained using single mode fibers that contained Bragg gratings; however, the peaks of interest were barely discernible above the noise. The goal of this research is to provide a multipurpose sensor in a single optical fiber capable of measuring a variety of chemical and physical properties.

  10. Miniature fiber Bragg grating sensor interrogator (FBG-Transceiver) system for use in aerospace and automotive health monitoring systems

    Science.gov (United States)

    Mendoza, Edgar A.; Kempen, Cornelia; Panahi, Allan; Lopatin, Craig

    2007-09-01

    Fiber Bragg grating sensors (FBGs) have gained rapid acceptance in aerospace and automotive structural health monitoring applications for the measurement of strain, stress, vibration, acoustics, acceleration, pressure, temperature, moisture, and corrosion distributed at multiple locations within the structure using a single fiber element. The most prominent advantages of FBGs are: small size and light weight, multiple FBG transducers on a single fiber, and immunity to radio frequency interference. A major disadvantage of FBG technology is that conventional state-of-the-art fiber Bragg grating interrogation systems are typically bulky and heavy bench top instruments that are assembled from off-the-shelf fiber optic and optical components integrated with a signal electronics board into an instrument console. Based on the need for a compact FBG interrogation system, this paper describes recent progress towards the development of a miniature fiber Bragg grating sensor interrogator (FBG-Transceiver TM) system based on multi-channel integrated optic sensor (InOSense) microchip technology. The hybrid InOSense microchip technology enables the integration of all of the functionalities, both passive and active, of conventional bench top FBG sensor interrogators systems, packaged in a miniaturized, low power operation, 2-cm x 5-cm small form factor (SFF) package suitable for the long-term structural health monitoring in applications where size, weight, and power are critical for operation. The sponsor of this program is NAVAIR under a DOD SBIR contract.

  11. Using Custom Fiber Bragg Grating-Based Sensors to Monitor Artificial Landslides.

    Science.gov (United States)

    Zhang, Qinghua; Wang, Yuan; Sun, Yangyang; Gao, Lei; Zhang, Zhenglin; Zhang, Wenyuan; Zhao, Pengchong; Yue, Yin

    2016-09-02

    Four custom fiber Bragg grating (FBG)-based sensors are developed to monitor an artificial landslide located in Nanjing, China. The sensors are composed of a rod and two FBGs. Based on the strength of the rods, two sensors are referred to as "hard sensors" (Sensor 1 and Sensor 2), the other two are referred to as "soft sensors" (Sensor 3 and Sensor 4). The two FBGs are fixed on each sensor rod at distances of 50 cm and 100 cm from the top of the rod (an upper FBG and a lower FBG). In the experiment presented in this paper, the sensors are installed on a slope on which an artificial landslide is generated through both machine-based and manual excavation. The fiber sensing system consists of the four custom FBG-based sensors, optical fiber, a static fiber grating demodulation instrument (SM125), and a PC with the necessary software. Experimental data was collected in the presence of an artificial landslide, and the results show that the lower FBGs are more sensitive than the upper FBGs for all four of the custom sensors. It was also found that Sensor 2 and Sensor 4 are more capable of monitoring small-scale landslides than Sensor 1 and Sensor 3, and this is mainly due to their placement location with respect to the landslide. The stronger rods used in the hard sensors make them more adaptable to the harsh environments of large landslides. Thus, hard sensors should be fixed near the landslide, while soft sensors should be placed farther away from the landslide. In addition, a clear tendency of strain variation can be detected by the soft sensors, which can be used to predict landslides and raise a hazard alarm.

  12. Using Custom Fiber Bragg Grating-Based Sensors to Monitor Artificial Landslides

    Science.gov (United States)

    Zhang, Qinghua; Wang, Yuan; Sun, Yangyang; Gao, Lei; Zhang, Zhenglin; Zhang, Wenyuan; Zhao, Pengchong; Yue, Yin

    2016-01-01

    Four custom fiber Bragg grating (FBG)-based sensors are developed to monitor an artificial landslide located in Nanjing, China. The sensors are composed of a rod and two FBGs. Based on the strength of the rods, two sensors are referred to as “hard sensors” (Sensor 1 and Sensor 2), the other two are referred to as “soft sensors” (Sensor 3 and Sensor 4). The two FBGs are fixed on each sensor rod at distances of 50 cm and 100 cm from the top of the rod (an upper FBG and a lower FBG). In the experiment presented in this paper, the sensors are installed on a slope on which an artificial landslide is generated through both machine-based and manual excavation. The fiber sensing system consists of the four custom FBG-based sensors, optical fiber, a static fiber grating demodulation instrument (SM125), and a PC with the necessary software. Experimental data was collected in the presence of an artificial landslide, and the results show that the lower FBGs are more sensitive than the upper FBGs for all four of the custom sensors. It was also found that Sensor 2 and Sensor 4 are more capable of monitoring small-scale landslides than Sensor 1 and Sensor 3, and this is mainly due to their placement location with respect to the landslide. The stronger rods used in the hard sensors make them more adaptable to the harsh environments of large landslides. Thus, hard sensors should be fixed near the landslide, while soft sensors should be placed farther away from the landslide. In addition, a clear tendency of strain variation can be detected by the soft sensors, which can be used to predict landslides and raise a hazard alarm. PMID:27598163

  13. High Pressure Sensing and Dynamics Using High Speed Fiber Bragg Grating Interrogation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, G. [LANL; Sandberg, R. L. [LANL; Lalone, B. M. [NSTec; Marshall, B. R. [NSTec; Grover, M. [NSTec; Stevens, G. D. [NSTec; Udd, E. [Columbia Gorge Research

    2014-06-01

    Fiber Bragg gratings (FBGs) are developing into useful sensing tools for measuring high pressure dynamics in extreme environments under shock loading conditions. Approaches using traditional diode array coupled FBG interrogation systems are often limited to readout speeds in the sub-MHz range. For shock wave physics, required detection speeds approaching 100 MHz are desired. We explore the use of two types of FBG sensing systems that are aimed at applying this technology as embedded high pressure probes for transient shock events. Both approaches measure time resolved spectral shifts in the return light from short (few mm long) uniform FBGs at 1550 nm. In the first approach, we use a fiber coupled spectrometer to demultiplex spectral channels into an array (up to 12) of single element InGaAs photoreceivers. By monitoring the detectors during a shock impact event with high speed recording, we are able to track the pressure induced spectral shifting in FBG down to a time resolution of 20 ns. In the second approach, developed at the Special Technologies Lab, a coherent mode-locked fiber laser is used to illuminate the FBG sensor. After the sensor, wavelength-to-time mapping is accomplished with a chromatic dispersive element, and entire spectra are sampled using a single detector at the modelocked laser repetition rate of 50 MHz. By sampling with a 12 GHz InGaAs detector, direct wavelength mapping in time is recorded, and the pressure induced FBG spectral shift is sampled at 50 MHz. Here, the sensing systems are used to monitor the spectral shifts of FBGs that are immersed into liquid water and shock compressed using explosives. In this configuration, the gratings survive to pressures approaching 50 kbar. We describe both approaches and present the measured spectral shifts from the shock experiments.

  14. Creation of a microstructured polymer optical fiber with UV Bragg grating inscription for the detection of extensions at temperatures up to 125°C

    DEFF Research Database (Denmark)

    Fasano, Andrea; Woyessa, Getinet; Stajanca, Pavol;

    2016-01-01

    We describe the fabrication of a polycarbonate (PC) micro-structured polymer optical fiber (mPOF) and the writing offiber Bragg gratings (FBGs) in it to enable strain and temperature measurements. We demonstrate the photosensitivity ofa dopant-free PC fiber by grating inscription using a UV laser...

  15. Engineering approach to in-situ bridge health monitoring with fiber bragg gratings

    Institute of Scientific and Technical Information of China (English)

    WU Zhan-jun; ZHANG Bo-ming; WAN Li-bing; ZHOU Zhi; OU Jin-ping

    2006-01-01

    In this presentation the feasibility and capability of fiber Bragg gratings (FBG) employed in bridge health monitoring are demonstrated on a real bridge. FBG's wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed,the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load,traffic load and temperature. The results show that the traffic fluxes, possible fatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.

  16. Cuspal Displacement Induced by Bulk Fill Resin Composite Polymerization: Biomechanical Evaluation Using Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Vinagre, Alexandra; Ramos, João; Alves, Sofia; Messias, Ana; Alberto, Nélia; Nogueira, Rogério

    2016-01-01

    Polymerization shrinkage is a major concern to the clinical success of direct composite resin restorations. The aim of this study was to compare the effect of polymerization shrinkage strain of two resin composites on cuspal movement based on the use of fiber Bragg grating (FBG) sensors. Twenty standardized Class II cavities prepared in upper third molars were allocated into two groups (n = 10). Restorations involved the bulk fill placement of conventional microhybrid resin composite (Esthet•X® HD, Dentsply DeTrey) (Group 1) or flowable "low-shrinkage" resin composite (SDR™, Dentsply DeTrey) (Group 2). Two FBG sensors were used per restoration for real-time measurement of cuspal linear deformation and temperature variation. Group comparisons were determined using ANCOVA (α = 0.05) considering temperature as the covariate. A statistically significant correlation between cuspal deflection, time, and material was observed (p < 0.01). Cuspal deflection reached 8.8 μm (0.23%) and 7.8 μm (0.20%) in Groups 1 and 2, respectively. When used with bulk fill technique, flowable resin composite SDR™ induced significantly less cuspal deflection than the conventional resin composite Esthet•X® HD (p = 0.015) and presented a smoother curve slope during the polymerization. FBG sensors appear to be a valid tool for accurate real-time monitoring of cuspal deformation. PMID:27190517

  17. Sensitivity Enhancement for Fiber Bragg Grating Sensors by Four Wave Mixing

    Directory of Open Access Journals (Sweden)

    Jiangbing Du

    2015-04-01

    Full Text Available All-optical signal processing based on four wave mixing (FWM in a highly nonlinear fiber (HNLF to enhance the sensitivity of a fiber sensor is demonstrated and comprehensively reviewed in this paper. The principle is based on the frequency chirp magnification (FCM by FWM. Degenerated FWM, cascaded two-stage FWM and pump-pulsed FWM with optical parametric amplification (OPA are experimentally utilized for magnifying the frequency chirp. By using the pump pulse modulation to increase the peak power, OPA can be induced with the use of a dispersion-optimized HNLF. Therefore, ultra-highly efficient FWM can be realized due to the high peak power and OPA. By using the fiber Bragg grating (FBG laser as the FWM pump, the wavelength drift of the FBG can thus be magnified due to the FCM. We obtain a sensing performance of 13.3 pm/με strain sensitivity and 141.2 pm/°C temperature sensitivity for a conventional FBG, which has an intrinsic strain sensitivity of only ~1 pm/με and an intrinsic temperature sensitivity of only ~10 pm/°C, respectively.

  18. Lamb wave detection in prepreg composite materials with fibre Bragg grating sensors

    Science.gov (United States)

    Miesen, Nick; Mizutani, Yoshihiro; Groves, Roger M.; Sinke, Jos; Benedictus, Rinze

    2011-04-01

    This paper demonstrates that existing Structural Health Monitoring (SHM) techniques have potential during the production phase in addition to their application for maintenance and for in-flight monitoring. Flaws occur during composite fabrication in industry, due to an imperfect process control and human errors. This decreases production efficiency and increases costs. In this paper, the monitoring of Lamb waves in unidirectional carbon fibre (UD-CFRP) prepreg material is demonstrated using both Fibre Bragg Gratings (FBG)s and piezolectric acoustic sensors, and that these SHM sensors may be used for flaw detection and production monitoring. The detection of Lamb waves in a one ply thick sheet of prepreg UD-CFRP material is demonstrated for an FBG sensor aligned with the carbon fibre orientation and bonded to the surface of the prepreg, Furthermore, the velocity of Lamb waves in prepreg UD-CFRP in different orientations is investigated. Finally the successful detection of a material crack in a prepreg UD-CFRP sheet using the Lamb wave detection method is demonstrated.

  19. An intrusion detection system for the protection of railway assets using Fiber Bragg Grating sensors.

    Science.gov (United States)

    Catalano, Angelo; Bruno, Francesco Antonio; Pisco, Marco; Cutolo, Antonello; Cusano, Andrea

    2014-01-01

    We demonstrate the ability of Fiber Bragg Gratings (FBGs) sensors to protect large areas from unauthorized activities in railway scenarios such as stations or tunnels. We report on the technological strategy adopted to protect a specific depot, representative of a common scenario for security applications in the railway environment. One of the concerns in the protection of a railway area centers on the presence of rail-tracks, which cannot be obstructed with physical barriers. We propose an integrated optical fiber system composed of FBG strain sensors that can detect human intrusion for protection of the perimeter combined with FBG accelerometer sensors for protection of rail-track access. Several trials were carried out in indoor and outdoor environments. The results demonstrate that FBG strain sensors bonded under a ribbed rubber mat enable the detection of intruder break-in via the pressure induced on the mat, whereas the FBG accelerometers installed under the rails enable the detection of intruders walking close to the railroad tracks via the acoustic surface waves generated by footsteps. Based on a single enabling technology, this integrated system represents a valuable intrusion detection system for railway security and could be integrated with other sensing functionalities in the railway field using fiber optic technology. PMID:25268920

  20. Internal and External Temperature Monitoring of a Li-Ion Battery with Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Novais, Susana; Nascimento, Micael; Grande, Lorenzo; Domingues, Maria Fátima; Antunes, Paulo; Alberto, Nélia; Leitão, Cátia; Oliveira, Ricardo; Koch, Stephan; Kim, Guk Tae; Passerini, Stefano; Pinto, João

    2016-08-30

    The integration of fiber Bragg grating (FBG) sensors in lithium-ion cells for in-situ and in-operando temperature monitoring is presented herein. The measuring of internal and external temperature variations was performed through four FBG sensors during galvanostatic cycling at C-rates ranging from 1C to 8C. The FBG sensors were placed both outside and inside the cell, located in the center of the electrochemically active area and at the tab-electrode connection. The internal sensors recorded temperature variations of 4.0 ± 0.1 °C at 5C and 4.7 ± 0.1 °C at 8C at the center of the active area, and 3.9 ± 0.1 °C at 5C and 4.0 ± 0.1 °C at 8C at the tab-electrode connection, respectively. This study is intended to contribute to detection of a temperature gradient in real time inside a cell, which can determine possible damage in the battery performance when it operates under normal and abnormal operating conditions, as well as to demonstrate the technical feasibility of the integration of in-operando microsensors inside Li-ion cells.

  1. Quasi-distributed fiber bragg grating array sensor for furnace applications

    Science.gov (United States)

    Reddy, P. Saidi; Sai Prasad, R. L. N.; Sen Gupta, D.; Sai Shankar, M.; Srimannarayana, K.; Ravinder Reddy, P.

    2012-05-01

    An experimental work on distributed temperature sensing making use of the fiber Bragg grating (FBG) array sensor for possible applications in the monitoring of the temperature profile in high temperature boilers is presented. A special sensor has been designed for this purpose which consists of four FBGs (of wavelengths λ B1 =1545.8 nm, λ B2 =1547 nm, λ B3 =1550.8 nm, λ B4 =1555.5 nm at 30 °C) written in the hydrogen-loaded fiber in line. All the FBGs are encapsulated inside a stainless steel tube using the rigid probe technique for avoiding micro cracks. The spatial distribution of the temperature profile inside a prototype boiler was measured experimentally both in horizontal and vertical directions employing the above sensor, and the results are presented. Further, the finite element simulation has been carried out by using ANSYS R11 software to predict temperature contours in the boiler, and the experimental and predicted results were found to be closely matching.

  2. Fiber Optic Bragg Grating Sensors for Thermographic Detection of Subsurface Anomalies

    Science.gov (United States)

    Allison, Sidney G.; Winfree, William P.; Wu, Meng-Chou

    2009-01-01

    Conventional thermography with an infrared imager has been shown to be an extremely viable technique for nondestructively detecting subsurface anomalies such as thickness variations due to corrosion. A recently developed technique using fiber optic sensors to measure temperature holds potential for performing similar inspections without requiring an infrared imager. The structure is heated using a heat source such as a quartz lamp with fiber Bragg grating (FBG) sensors at the surface of the structure to detect temperature. Investigated structures include a stainless steel plate with thickness variations simulated by small platelets attached to the back side using thermal grease. A relationship is shown between the FBG sensor thermal response and variations in material thickness. For comparison, finite element modeling was performed and found to agree closely with the fiber optic thermography results. This technique shows potential for applications where FBG sensors are already bonded to structures for Integrated Vehicle Health Monitoring (IVHM) strain measurements and can serve dual-use by also performing thermographic detection of subsurface anomalies.

  3. Experimental Investigation on Acousto-Ultrasonic Sensing Using Polarization-Maintaining Fiber Bragg Gratings

    Science.gov (United States)

    Wang, Gang; Banks, Curtis E.

    2015-01-01

    This report discusses the guided Lamb wave sensing using polarization-maintaining (PM) fiber Bragg grating (PM-FBG) sensor. The goal is to apply the PM-FBG sensor system to composite structural health monitoring (SHM) applications in order to realize directivity and multi-axis strain sensing capabilities while using reduced number of sensors. Comprehensive experiments were conducted to evaluate the performance of the PM-FBG sensor in a composite panel structure under different actuation frequencies and locations. Three Macro-Fiber-Composite (MFC) piezoelectric actuators were used to generate guided Lamb waves and they are oriented at 0, 45, and 90 degrees with respect to PM-FBG axial direction, respectively. The actuation frequency was varied from 20kHz to 200kHz. It is shown that the PM-FBG sensor system is able to detect high-speed ultrasound waves and capture the characteristics under different actuation conditions. Both longitudinal and lateral strain components in the order of nano-strain were determined based on the reflective intensity measurement data from fast and slow axis of the PM fiber. It must be emphasized that this is the first attempt to investigate acousto-ultrasonic sensing using PM-FBG sensor. This could lead to a new sensing approach in the SHM applications.

  4. A Fiber Bragg Grating Sensing-Based Micro-Vibration Sensor and Its Application.

    Science.gov (United States)

    Li, Tianliang; Tan, Yuegang; Zhou, Zude

    2016-01-01

    This paper proposes a fiber Bragg grating sensing-based micro-vibration sensor. The optical fiber has been directly treated as an elastomer to design the micro-vibration sensor, which possesses two FBGs. The mass is fixed on the middle of the fiber, and the vertical vibration of the mass has been converted into the axial tension/compression of the fiber. The principle of the sensor has been introduced, and the experiment conclusions show that the sensor sensitivity is 2362 pm/g within the range of 200-1200 mm/s², which is consistent with theoretical analysis sensitivity of 2532.6 pm/g, and it shows an excellent linearity of 1.376%, while the resonant frequency of the sensor is 34 Hz, and the flat frequency range resides in the 0-22 Hz range. When used to measure micro-vibrations, its measured frequency relative error is less than 1.69% compared with the values acquired with a MEMS accelerometer, and the amplitude values of its measured vibration signal are consistent with the MEMS accelerometer under different excitation conditions too, so it can effectively realize the micro-vibration measurements. PMID:27092507

  5. High temperature strain sensor based on a fiber Bragg grating and rhombus metal structure.

    Science.gov (United States)

    Zhang, Liang; Liu, Yueming; Gao, Xiaoliang; Xia, Zhongcheng

    2015-10-01

    In this paper, a novel high temperature strain sensor based on a polyimide-coated fiber Bragg grating (FBG) and a rhombus metal structure is presented and experimentally demonstrated. By heating low softening point glass via a micro torch, the polyimide-coated FBG could be fixed into the rhombus metal structure. Consequently, when the rhombus structure is stretched and compressed, respectively, then the FBG will be subjected to a reverse state. Moreover, the strain sensitivity is controllable and enhanced by adjusting the dimension of the rhombus metal structure appropriately. The experiment was then carried out by using an equi-intensity cantilever beam and high temperature chamber, and the result showed that the proposed high temperature strain sensor could be used at the high temperature of 300°C. A resolution of ∼10  με has been experimentally achieved. The average wavelength strain sensitivity at 300°C is 1.821 and 1.814 pm/με, for the compressed and stretched states, respectively. PMID:26479639

  6. Sensor based on macrobent fiber Bragg grating structure for simultaneous measurement of refractive index and temperature.

    Science.gov (United States)

    Liu, Tiegen; Chen, Yaofei; Han, Qun; Liu, Fangchao; Yao, Yunzhi

    2016-02-01

    A novel and compact all-fiber sensor based on a macrobent fiber Bragg grating (FBG) structure for simultaneous measurement of refractive index (RI) and temperature is proposed and experimentally investigated. The sensor can be easily fabricated by properly bending an FBG. The bending causes interference between the core mode and the whispering gallery mode, which induces another kind of dip in the transmission spectra of the sensor besides the sharp one of the FBG. Because the two kinds of dips respond differently to the surrounding RI and temperature, these two parameters can be unambiguously measured by the sensor. A sample sensor was fabricated and experimentally investigated, and RI sensitivity of 165.9276 nm/RIU in the range from 1.3330 to 1.3785 and temperature sensitivity of 31.7 pm/°C were achieved. This sensor provides a convenient and economical way for applications where temperature and RI have to be simultaneously measured. PMID:26836081

  7. An Intrusion Detection System for the Protection of Railway Assets Using Fiber Bragg Grating Sensors

    Directory of Open Access Journals (Sweden)

    Angelo Catalano

    2014-09-01

    Full Text Available We demonstrate the ability of Fiber Bragg Gratings (FBGs sensors to protect large areas from unauthorized activities in railway scenarios such as stations or tunnels. We report on the technological strategy adopted to protect a specific depot, representative of a common scenario for security applications in the railway environment. One of the concerns in the protection of a railway area centers on the presence of rail-tracks, which cannot be obstructed with physical barriers. We propose an integrated optical fiber system composed of FBG strain sensors that can detect human intrusion for protection of the perimeter combined with FBG accelerometer sensors for protection of rail-track access. Several trials were carried out in indoor and outdoor environments. The results demonstrate that FBG strain sensors bonded under a ribbed rubber mat enable the detection of intruder break-in via the pressure induced on the mat, whereas the FBG accelerometers installed under the rails enable the detection of intruders walking close to the railroad tracks via the acoustic surface waves generated by footsteps. Based on a single enabling technology, this integrated system represents a valuable intrusion detection system for railway security and could be integrated with other sensing functionalities in the railway field using fiber optic technology.

  8. A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

    CERN Document Server

    Benussi, Luigi

    2015-01-01

    We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of MPGD, with particular attention to the realisation of the largest triple GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 qm active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use ...

  9. A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

    CERN Document Server

    Abbaneo, D; Abbrescia, M; Abdelalim, A A; Akl, M Abi; Aboamer, O; Acosta, D; Ahmad, A; Ahmed, W; Aleksandrov, A; Aly, R; Altieri, P; Asawatangtrakuldee, C; Aspell, P; Assran, Y; Awan, I; Bally, S; Ban, Y; Banerjee, S; Barashko, V; Barria, P; Bencze, G; Beni, N; Benussi, L; Bhopatkar, V; Bianco, S; Bos, J; Bouhali, O; Braghieri, A; Braibant, S; Buontempo, S; Calabria, C; Caponero, M; Caputo, C; Cassese, F; Castaneda, A; Cauwenbergh, S; Cavallo, F R; Celik, A; Choi, M; Choi, S; Christiansen, J; Cimmino, A; Colafranceschi, S; Colaleo, A; Garcia, A Conde; Czellar, S; Dabrowski, M M; De Lentdecker, G; De Oliveira, R; de Robertis, G; Dildick, S; Dorney, B; Elmetenawee, W; Endroczi, G; Errico, F; Fenyvesi, A; Ferry, S; Furic, I; Giacomelli, P; Golovtsov, V; Guiducci, L; Guilloux, F; Gutierrez, A; Hadjiiska, R M; Hassan, A; Hauser, J; Hoepfner, K; Hohlmann, M; Hoorani, H; Iaydjiev, P; Jeng, Y G; Kamon, T; Karchin, P; Korytov, A; Krutelyov, S; Kumar, A; Kim, H; Lee, J; Lenzi, T; Litov, L; Loddo, F; Madorsky, A; Maerschalk, T; Maggi, M; Magnani, A; Mal, P K; Mandal, K; Marchioro, A; Marinov, A; Masod, R; Majumdar, N; Merlin, J A; Mitselmakher, G; Mohanty, A K; Muhammad, S; Mohapatra, A; Molnar, J; Mukhopadhyay, S; Naimuddin, M; Nuzzo, S; Oliveri, E; Pant, L M; Paolucci, P; Park, I; Passeggio, G; Passamonti, L; Pavlov, B; Philipps, B; Piccolo, D; Pierluigi, D; Postema, H; Baranac, A Puig; Radi, A; Radogna, R; Raffone, G; Ranieri, A; Rashevski, G; Riccardi, C; Rodozov, M; Rodrigues, A; Ropelewski, L; RoyChowdhury, S; Russo, A; Ryu, G; Ryu, M S; Safonov, A; Salva, S; Saviano, G; Sharma, A; Sharma, R; Shah, A H; Shopova, M; Sturdy, J; Sultanov, G; Swain, S K; Szillasi, Z; Tatarinov, A; Tuuva, T; Tytgat, M; Vai, I; Van Stenis, M; Venditti, R; Verhagen, E; Verwilligen, P; Vitulo, P; Volkov, S; Vorobyev, A; Wang, D; Wang, M; Yang, U; Yang, Y; Yonamine, R; Zaganidis, N; Zenoni, F; Zhang, A

    2015-01-01

    We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurement...

  10. Fibre Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

    CERN Document Server

    Benussi, Luigi

    2015-01-01

    Fibre Bragg Grating (FBG) sensors have been so far mainly used in high energy physics as high precision positioning and re-positioning sensor and as low cost, easy to mount and low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS upgrade consists of 144 GEM chambers of about 0.5 $m^{2}$ active area each and based on the triple GEMs technology, to be installed in the very forward region of the CMS endcap. The large active are of each GE1/1 chamber consists of a single GEM foil (the GE1/1 chambers represent the largest GEM foils assembled and operated so far) to be mechanically stretched in order to secure its flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. A network of FBG sensors have been used to determine the optimal m...

  11. Gauge factors of fibre Bragg grating strain sensors in different types of optical fibres

    International Nuclear Information System (INIS)

    Gauge factors of fibre Bragg grating (FBG)-based strain sensors that had been inscribed into three different types of optical fibres, which differ in core diameters and doping concentrations, were determined at room temperature with high accuracy. Repeated measurements were carried out with several samples of each type of fibre to allow statistical evaluations. For each type, the gauge factors were measured in two configurations: when the bare fibres were glued on a specimen at the location of the FBG and when they were vertically suspended and not bonded to any structure at the location of the FBG. By combining the results of both configurations, the strain transfer ratio of the gluing process and the strain-optic coefficient, peff, of the different types of fibres were determined. The strain-optic coefficient was found to vary up to 1.5% for the different types of optical fibres. The strain transfer ratio was obtained to be close to unity (>99%), showing the high quality of the gluing technique employed. The investigations demonstrate that highly accurate strain sensing is possible with fibre-optic strain sensors. The results are important for the development of accurate and reliable attaching techniques for coated sensor fibres and fibre-optic sensor patches. (paper)

  12. Health monitoring of Binzhou Yellow River highway bridge using fiber Bragg gratings

    Science.gov (United States)

    Ou, Jinping; Zhao, Xuefeng; Li, Hui; Zhou, Zhi; Zhang, Zhichun; Wang, Chuan

    2005-05-01

    Binzhou yellow river Highway Bridge with 300 meter span and 768 meter length is located in the Shandong province of China and is the first cable stayed bridge with three towers along the yellow river, one of the biggest rivers in China. In order to monitoring the strain and temperature of the bridge and evaluate the health condition, one fiber Bragg grating sensing network consists of about one hundred and thirty FBG sensors mounted in 31 monitoring sections respectively, had been built during three years time. Signal cables of sensors were led to central control room located near the main tower. One four-channel FBG interrogator was used to read the wavelengths from all the sensors, associated with four computer-controlled optic switches connected to each channel. One program was written to control the interrogator and optic switches simultaneously, and ensure signal input precisely. The progress of the monitoring can be controlled through the internet. The sensors embedded were mainly used to monitor the strain and temperature of the steel cable and reinforced concrete beam. PE jacket opening embedding technique of steel cable had been developed to embed FBG sensors safely, and ensure the reliability of the steel cable opened at the same time. Data obtained during the load test can show the strain and temperature status of elements were in good condition. The data obtained via internet since the bridge's opening to traffic shown the bridge under various load such as traffic load, wind load were in good condition.

  13. Peak wavelength interrogation of fiber Bragg grating sensors during impact events

    International Nuclear Information System (INIS)

    In this paper, we embed fiber Bragg grating (FBG) sensors in graphite fiber–epoxy woven composite laminates to detect evolving damage modes. The peak wavelengths of the FBG sensors are interrogated at 625 and 295 kHz, while the laminates are subjected to 11.0 J low-velocity impact events. It is demonstrated that 295 kHz interrogation is sufficient for accurately collecting the dynamic response of the sensors. The FBG sensors embedded at the laminate midplanes successfully reconstructed the global laminate response to impact. The maximum and full width at half-maximum (FWHM) for the relative strain histories demonstrated the same trends as the maximum and FWHM of the contact force histories measured from the impactor. More noise was present in the strain histories obtained from the FBG sensors than the contact force histories, as the embedded FBGs were sensitive to local perturbations in the stress state. The FBG sensors embedded below the midplane of the laminate were closer to the damage regions and measured complex strain histories. In one case, this strain history revealed the presence of delamination

  14. Smart textile sensing system for human respiration monitoring based on fiber Bragg grating

    Science.gov (United States)

    Zhang, Cheng; Miao, Chang-yun; Li, Hong-qiang; Song, Hui-chao; Xu, Fan-jie

    2009-07-01

    Magnetic resonance imaging (MRI) has become an indispensable aid to diagnosis and treatment. As the doctor cannot accompany the patient, it is essential that the patient be monitored remotely to avoid the risk of respiration being impaired by anesthetic drugs or upper airway obstruction. A smart wearable textile sensing system is described in this paper. A fiber Bragg grating (FBG) with polymer encapsulation has been woven into an elastic bandage to detect the respiration motion. According to the strain principle of FBG, the breathing rate and intensity can be obtained by measuring the variety of FBG reflected wavelength. In order to eliminate the temperature cross-sensitivity, a FBG temperature sensor has also been woven into the bandage to achieve the temperature compensation computing. Based on the tunable Fabry-Perot filter wavelength demodulated theory, wavelength measuring method and data processing arithmetic have been presented, and the system with ARM microprocessor has been designed to process and display the breathing information. The experiments to the system have proved that the wavelength measuring range is about 40nm, the resolution of wavelength can arrive at 2pm, and the sampling rate is 5Hz.

  15. Smart Textile Based on Fiber Bragg Grating Sensors for Respiratory Monitoring: Design and Preliminary Trials

    Science.gov (United States)

    Ciocchetti, Marco; Massaroni, Carlo; Saccomandi, Paola; Caponero, Michele A.; Polimadei, Andrea; Formica, Domenico; Schena, Emiliano

    2015-01-01

    Continuous respiratory monitoring is important to assess adequate ventilation. We present a fiber optic-based smart textile for respiratory monitoring able to work during Magnetic Resonance (MR) examinations. The system is based on the conversion of chest wall movements into strain of two fiber Bragg grating (FBG) sensors, placed on the upper thorax (UT). FBGs are glued on the textile by an adhesive silicon rubber. To increase the system sensitivity, the FBGs positioning was led by preliminary experiments performed using an optoelectronic system: FBGs placed on the chest surface experienced the largest strain during breathing. System performances, in terms of respiratory period (TR), duration of inspiratory (TI) and expiratory (TE) phases, as well as left and right UT volumes, were assessed on four healthy volunteers. The comparison of results obtained by the proposed system and an optoelectronic plethysmography highlights the high accuracy in the estimation of TR, TI, and TE: Bland-Altman analysis shows mean of difference values lower than 0.045 s, 0.33 s, and 0.35 s for TR, TI, and TE, respectively. The mean difference of UT volumes between the two systems is about 8.3%. The promising results foster further development of the system to allow routine use during MR examinations. PMID:26389961

  16. Internal and External Temperature Monitoring of a Li-Ion Battery with Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Novais, Susana; Nascimento, Micael; Grande, Lorenzo; Domingues, Maria Fátima; Antunes, Paulo; Alberto, Nélia; Leitão, Cátia; Oliveira, Ricardo; Koch, Stephan; Kim, Guk Tae; Passerini, Stefano; Pinto, João

    2016-01-01

    The integration of fiber Bragg grating (FBG) sensors in lithium-ion cells for in-situ and in-operando temperature monitoring is presented herein. The measuring of internal and external temperature variations was performed through four FBG sensors during galvanostatic cycling at C-rates ranging from 1C to 8C. The FBG sensors were placed both outside and inside the cell, located in the center of the electrochemically active area and at the tab-electrode connection. The internal sensors recorded temperature variations of 4.0 ± 0.1 °C at 5C and 4.7 ± 0.1 °C at 8C at the center of the active area, and 3.9 ± 0.1 °C at 5C and 4.0 ± 0.1 °C at 8C at the tab-electrode connection, respectively. This study is intended to contribute to detection of a temperature gradient in real time inside a cell, which can determine possible damage in the battery performance when it operates under normal and abnormal operating conditions, as well as to demonstrate the technical feasibility of the integration of in-operando microsensors inside Li-ion cells. PMID:27589749

  17. A fiber Bragg grating--bimetal temperature sensor for solar panel inverters.

    Science.gov (United States)

    Ismail, Mohd Afiq; Tamchek, Nizam; Hassan, Muhammad Rosdi Abu; Dambul, Katrina D; Selvaraj, Jeyrai; Rahim, Nasrudin Abd; Sandoghchi, Reza; Adikan, Faisal Rafiq Mahamd

    2011-01-01

    This paper reports the design, characterization and implementation of a fiber Bragg grating (FBG)-based temperature sensor for an insulted-gate Bipolar transistor (IGBT) in a solar panel inverter. The FBG is bonded to the higher coefficient of thermal expansion (CTE) side of a bimetallic strip to increase its sensitivity. Characterization results show a linear relationship between increasing temperature and the wavelength shift. It is found that the sensitivity of the sensor can be categorized into three characterization temperature regions between 26 °C and 90 °C. The region from 41 °C to 90 °C shows the highest sensitivity, with a value of 14 pm/°C. A new empirical model that considers both temperature and strain effects has been developed for the sensor. Finally, the FBG-bimetal temperature sensor is placed in a solar panel inverter and results confirm that it can be used for real-time monitoring of the IGBT temperature.

  18. Reconstruction of structural damage based on reflection intensity spectra of fiber Bragg gratings

    Science.gov (United States)

    Huang, Guojun; Wei, Changben; Chen, Shiyuan; Yang, Guowei

    2014-12-01

    We present an approach for structural damage reconstruction based on the reflection intensity spectra of fiber Bragg gratings (FBGs). Our approach incorporates the finite element method, transfer matrix (T-matrix), and genetic algorithm to solve the inverse photo-elastic problem of damage reconstruction, i.e. to identify the location, size, and shape of a defect. By introducing a parameterized characterization of the damage information, the inverse photo-elastic problem is reduced to an optimization problem, and a relevant computational scheme was developed. The scheme iteratively searches for the solution to the corresponding direct photo-elastic problem until the simulated and measured (or target) reflection intensity spectra of the FBGs near the defect coincide within a prescribed error. Proof-of-concept validations of our approach were performed numerically and experimentally using both holed and cracked plate samples as typical cases of plane-stress problems. The damage identifiability was simulated by changing the deployment of the FBG sensors, including the total number of sensors and their distance to the defect. Both the numerical and experimental results demonstrate that our approach is effective and promising. It provides us with a photo-elastic method for developing a remote, automatic damage-imaging technique that substantially improves damage identification for structural health monitoring.

  19. Reconstruction of structural damage based on reflection intensity spectra of fiber Bragg gratings

    International Nuclear Information System (INIS)

    We present an approach for structural damage reconstruction based on the reflection intensity spectra of fiber Bragg gratings (FBGs). Our approach incorporates the finite element method, transfer matrix (T-matrix), and genetic algorithm to solve the inverse photo-elastic problem of damage reconstruction, i.e. to identify the location, size, and shape of a defect. By introducing a parameterized characterization of the damage information, the inverse photo-elastic problem is reduced to an optimization problem, and a relevant computational scheme was developed. The scheme iteratively searches for the solution to the corresponding direct photo-elastic problem until the simulated and measured (or target) reflection intensity spectra of the FBGs near the defect coincide within a prescribed error. Proof-of-concept validations of our approach were performed numerically and experimentally using both holed and cracked plate samples as typical cases of plane-stress problems. The damage identifiability was simulated by changing the deployment of the FBG sensors, including the total number of sensors and their distance to the defect. Both the numerical and experimental results demonstrate that our approach is effective and promising. It provides us with a photo-elastic method for developing a remote, automatic damage-imaging technique that substantially improves damage identification for structural health monitoring. (paper)

  20. Shape memory polymeric composites sensing by optic fibre Bragg gratings: A very first approach

    Science.gov (United States)

    Quadrini, Fabrizio; Santo, Loredana; Ciminello, Monica; Concilio, Antonio; Volponi, Ruggero; Spena, Paola

    2016-05-01

    Shape memory polymer composites (SMPCs) have the potential for many applications in aerospace, spanning from self-repairing of structures to self-deploying of antennas, solar sails, or functional devices (e.g. for grabbing small space debris). In all these cases, it may be essential to have information about their configuration at different stages of shape recovery. In this study, the strain history of a prepreg carbon fibre system, cured with a shape memory polymer (SMP) interlayer, is monitored through a Fibre Bragg Grating (FBG), a fibre optic sensor device. SMPC has been manufactured by using traditional technologies for aerospace. After manufacturing cylindrical shape samples, an external fibre optic system is added to the composite structure; this system is especially suited for high temperatures which are necessary for SMP recovery and composite softening. Sensor functionality is checked before and after each strain history path. Optic fibre arrangement is optimized to avoid unwanted breakings whereas strains are limited by fibre collapsing, i.e. within nominal 2% of deformation. Dynamic information about shape recovery gives fundamental insights about strain evolution during time as well as its spatial distribution.

  1. Cuspal Displacement Induced by Bulk Fill Resin Composite Polymerization: Biomechanical Evaluation Using Fiber Bragg Grating Sensors.

    Science.gov (United States)

    Vinagre, Alexandra; Ramos, João; Alves, Sofia; Messias, Ana; Alberto, Nélia; Nogueira, Rogério

    2016-01-01

    Polymerization shrinkage is a major concern to the clinical success of direct composite resin restorations. The aim of this study was to compare the effect of polymerization shrinkage strain of two resin composites on cuspal movement based on the use of fiber Bragg grating (FBG) sensors. Twenty standardized Class II cavities prepared in upper third molars were allocated into two groups (n = 10). Restorations involved the bulk fill placement of conventional microhybrid resin composite (Esthet•X® HD, Dentsply DeTrey) (Group 1) or flowable "low-shrinkage" resin composite (SDR™, Dentsply DeTrey) (Group 2). Two FBG sensors were used per restoration for real-time measurement of cuspal linear deformation and temperature variation. Group comparisons were determined using ANCOVA (α = 0.05) considering temperature as the covariate. A statistically significant correlation between cuspal deflection, time, and material was observed (p resin composite SDR™ induced significantly less cuspal deflection than the conventional resin composite Esthet•X® HD (p = 0.015) and presented a smoother curve slope during the polymerization. FBG sensors appear to be a valid tool for accurate real-time monitoring of cuspal deformation.

  2. Fiber-optical microphones and accelerometers based on polymer optical fiber Bragg gratings

    DEFF Research Database (Denmark)

    Yuan, Scott Wu; Stefani, Alessio; Bang, Ole;

    2010-01-01

    Polymer optical fibers (POFs) are ideal for applications as the sensing element in fiber-optical microphones and accelerometers based on fiber Bragg gratings (FBGs) due to their reduced Young’s Modulus of 3.2GPa, compared to 72GPa of Silica. To maximize the sensitivity and the dynamic range...... of the device the outer diameter and the length of the sensing fiber segment should be as small as possible. To this end we have fabricated 3mm FBGs in single-mode step-index POFs of diameter 115 micron, using 325nm UV writing and a phase-mask technique. 6mm POF sections with FBGs in the center have been glued...... to standard Silica SMF28 fibers. These POF FBGs have been characterized in terms of temperature and strain to find operating regimes with no hysteresis. Commercial fast wavelength interrogators (KHz) are shown to be able to track the thin POF FBGs and they are finally applied in a prototype accelerometer...

  3. Long-period suspended silicon Bragg grating filter for hybrid near- and mid-infrared operation

    CERN Document Server

    Alonso-Ramos, Carlos; Benedikovic, Daniel; Vakarin, Vladyslav; Duran-Valdeiglesias, Elena; Perez-Galacho, Diego; Cassan, Eric; Marris-Morini, Delphine; Cheben, Pavel; Vivien, Laurent

    2016-01-01

    The large transparency window of silicon, covering the 1.1 um 8 um wavelength range, makes it a promising platform for the implementation of photothermal-based absorption spectrometers. These devices indirectly sense absorption in the mid-infrared (MIR) by using near-infrared (NIR) wavelengths, thereby enabling the realization of MIR absorption spectrometers without the need for MIR photodetectors. Nevertheless, due to their comparatively large index contrast and cross-sections, MIR Si strip waveguides are multi-mode at NIR wavelengths, hindering device implementation. Here we present, for the first time, an integrated Bragg grating waveguide filter for hybrid near- and mid-infrared operation. Specifically, the filter is implemented in a single-etch suspended silicon corrugated waveguide with an effectively single-mode operation in NIR region for a waveguide cross-section as large as 0.5 um x 1.1 um. At the same time, the waveguide supports single-mode propagation in MIR region. We demonstrate a long-period w...

  4. SPDC correlated photon source filtered for narrowed bandwidth using volume Bragg grating

    Science.gov (United States)

    Slattery, Oliver; Kuo, Paulina; Kim, Yong-Su; Ma, Lijun; Tang, Xiao

    2012-10-01

    A Volume Bragg Grating (VBG) can be used to efficiently extract a narrow bandwidth, highly collimated beam from an otherwise broad spectrum beam. We use a VBG to extract a narrow bandwidth of signal spectrum from a broadband Spontaneous Parametric Down-Conversion source to optimally match the narrow detection bandwidth of our idler upconversion detector. Improved coincidence count rates and visibility can be achieved when limiting signal-spectrum detection to the narrow signal bandwidth whose photons are correlated with a narrow idler-spectrum bandwidth that has been selected by the up-conversion detector. We compare coincidence count rate and visibility for when the entire signal spectrum is detected and when the spectrum has been filtered by the VBG. We further relax the collection techniques and show that following the VBG, the coincidence count rate improves with minimal loss in visibility compared to when the entire spectrum is detected. We introduce our initial efforts at using the VBG to further narrow the signal spectrum by placing it inside a multipass cavity. Additionally, we further adapt the single photon level up-conversion spectrometer, previously developed for idler spectrum measurement, to indirectly measure the single photon level signal spectrum. We verify its capability for several different wavelength and linewidth selections.

  5. Temperature sensing of micron scale polymer fibers using fiber Bragg gratings

    KAUST Repository

    Zhou, J.

    2015-07-02

    Highly conductive polymer fibers are key components in the design of multifunctional textiles. Measuring the voltage/temperature relationships of these fibers is very challenging due to their very small diameters, making it impossible to rely on classical temperature sensing techniques. These fibers are also so fragile that they cannot withstand any perturbation from external measurement systems. We propose here, a non-contact temperature measurement technique based on fiber Bragg gratings (FBGs). The heat exchange is carefully controlled between the probed fibers and the sensing FBG by promoting radiation and convective heat transfer rather than conduction, which is known to be poorly controlled. We demonstrate our technique on a highly conductive Poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS)-based fiber. A non-phenomenological model of the sensing system based on meaningful physical parameters is validated towards experimental observations. The technique reliably measures the temperature of the polymer fibers when subjected to electrical loading. © 2015 IOP Publishing Ltd.

  6. Simultaneous measurement of strain and temperature by two peanut tapers with embedded fiber Bragg grating.

    Science.gov (United States)

    Lv, Lingya; Wang, Sumei; Jiang, Lan; Zhang, Fei; Cao, Zhitao; Wang, Peng; Jiang, Yi; Lu, Yongfeng

    2015-12-20

    A compact optical fiber sensor for simultaneous measurement of strain and temperature is designed and experimentally investigated. The proposed sensor consists of a two-peanut-taper Mach-Zehnder interferometer (MZI) and in-line embedded fiber Bragg grating (FBG). The sensor at a length of 35 mm presents strain sensitivities 1.07  pm/με and 0.891  pm/με, the temperature sensitivities are 55.35  pm/°C and 10.85  pm/°C, for MZI and FBG, respectively. Through tapering the center of the sensor by a fusion splicer, the strain sensitivity of the MZI is improved to 1.93  pm/με. The resolutions for strain and temperature measurement are ±3.104  με and ±0.194°C with the wavelength resolution of 5 pm. The experimental results show that the sensor is able to simultaneously measure strain and temperature by sensitivity matrix with advantages such as simple structure, compact size, ease of fabrication, low cost, etc. PMID:26837035

  7. Experimental investigation on acousto-ultrasonic sensing using polarization-maintaining fiber Bragg gratings

    Science.gov (United States)

    Banks, Curtis E.; Wang, Gang

    2016-04-01

    This report discusses the guided Lamb wave sensing using polarization-maintaining (PM) fiber Bragg grating (PM-FBG) sensor. The goal is to apply the PM-FBG sensor system to composite structural health monitoring (SHM) applications in order to realize directivity and multi-axis strain sensing capabilities while reducing the number of sensors. Comprehensive experiments were conducted to evaluate the performance of the PM-FBG sensor attached to a composite panel structure under different actuation frequencies and locations. Three Macro-Fiber-Composite (MFC) piezoelectric actuators were used to generate guided Lamb waves that were oriented at 0, 45, and 90 degrees with respect to PMFBG axial direction, respectively. The actuation frequency was varied from 20 kHz to 200 kHz. It was shown that the PM-FBG sensor system was able to detect high-speed ultrasound waves and capture the characteristics under different actuation conditions. Both longitudinal and lateral strain components in the order of nano-strain were determined based on the reflective intensity measurement data from fast and slow axis of the PM fiber. It must be emphasized that this is the first attempt to investigate acouto-ultrasonic sensing using PM-FBG sensor. This could lead to a new sensing approach in the SHM applications.

  8. Surface modification of optical materials with hydrogen plasma for fabrication of Bragg gratings.

    Science.gov (United States)

    Salgaeva, Uliana O; Volyncev, Anatoliy B; Mendes, Sergio B

    2016-01-20

    We investigate the hydrogen plasma process as a route for creating Bragg gratings (BGs) on optoelectronic materials such as undoped lithium niobate (LiNbO(3)), proton-exchanged LiNbO(3), and soda-lime glass. Photopatterns (periodic modulations, Λ=323-2000  nm) were created on those substrates and the hydrogen plasma process was investigated for its ability to transfer the microstructures and the underlying mechanisms involved in this process. The diffraction efficiency and surface topology of the BG were characterized, as well as the optical properties of corresponding bulk materials undergoing the same plasma treatment. It is shown that the hydrogen plasma treatment changes the complex refractive index and modifies the surface topology with a volume expansion in the near-surface region, and both features are connected to the appearance of structural defects in the materials. The hydrogen plasma offers unique flexibility and advantages that can be explored for the fabrication of integrated photonic components. PMID:26835921

  9. Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings

    KAUST Repository

    Mulle, Matthieu

    2015-04-22

    Fiber Bragg gratings (FBG) may be used to monitor strain over the surface of a structure as an alternative technology to conventional strain gauges. However, FBG bonding techniques have still not been established to yield satisfactory surface measurements. Here, two adhesives were investigated, one with low viscosity and the other with high viscosity for bonding FBGs on glass/epoxy sandwich skins. First, instrumented elementary specimens were tested under tension. FBG strain results were analyzed together with digital image correlation (DIC) measurements. The influence of the bonding layer on the measured strain and on the integrity of the sensor was investigated by considering different regions of interest. Next, an instrumented structural sandwich beam was tested under four-point bending. FBG rosettes were compared to conventional strain gauge rosettes. The high viscosity adhesive demonstrated behaviors that affected FBG accuracy. Brittleness of the bonding layer and poor interface adhesion were observed using DIC and X-ray tomography. By contrast, the low viscosity adhesive demonstrated satisfactory results. The FBG strain measurements appeared to be consistent with those of DIC. The accuracy is also adequate as the FBGs and the conventional strain gauges had similar results in three directions, under tension and under compression.

  10. A minimally invasive in-fiber Bragg grating sensor for intervertebral disc pressure measurements

    International Nuclear Information System (INIS)

    We present an in-fiber Bragg grating (FBG) based intervertebral disc (IVD) pressure sensor that has pressure sensitivity seven times greater than that of a bare fiber, and a major diameter and sensing area of only 400 µm and 0.03 mm2, respectively. This is the only optical, the smallest and the most mechanically compliant disc pressure sensor reported in the literature. This is also an improvement over other FBG pressure sensors that achieve increased sensitivity through mechanical amplification schemes, usually resulting in major diameters and sensing lengths of many millimeters. Sensor sensitivity is predicted using numerical models, and the predicted sensitivity is verified through experimental calibrations. The sensor is validated by conducting IVD pressure measurements in porcine discs and comparing the FBG measurements to those obtained using the current standard sensor for IVD pressure. The predicted sensitivity of the FBG sensor matched with that measured experimentally. IVD pressure measurements showed excellent repeatability and agreement with those obtained from the standard sensor. Unlike the current larger sensors, the FBG sensor could be used in discs with small disc height (i.e. cervical or degenerated discs). Therefore, there is potential to conduct new measurements that could lead to new understanding of the biomechanics

  11. Phase-shifted fiber Bragg grating inscription by fusion splicing technique and femtosecond laser

    Science.gov (United States)

    Jiang, Yajun; Yuan, Yuan; Xu, Jian; Yang, Dexing; Li, Dong; Wang, Meirong; Zhao, Jianlin

    2016-11-01

    A new method for phase-shifted fiber Bragg grating (PS-FBG) inscription in single mode fiber by fusion splicing technique and femtosecond laser is presented. The PS-FBG is produced by exposing the fusion spliced fiber with femtosecond laser through a uniform phase mask. The transmission spectrum of the PS-FBG shows a nonlinear red shift during the inscription process, and two or three main dips can be observed due to the formation of one or two FBG-based Fabry-Pérot structures by controlling the exposure intensity and time of the laser. For a peak power density of 4.8×1013 W/cm2, the induced refractive index modulation can reach to 6.3×10-4 in the fiber without sensitization. The PS-FBG's temperature, strain and pressure characteristics are also experimentally studied. These PS-FBGs can be potentially used for multiple wavelength fiber lasers, filters and optical fiber sensors.

  12. An Investigation of Bonding-Layer Characteristics of Substrate-Bonded Fiber Bragg Grating

    Science.gov (United States)

    Cheng, Chih-Chun; Lo, Yu-Lung; Pun, B. S.; Chang, Y. M.; Li, W. Y.

    2005-11-01

    An analytic model of a bonding layer for a fiber Bragg grating (FBG) bonded on a substrate was developed to predict the strain transfer from the substrate to the FBG when the substrate is subjected to external forces. This model provides a guide on how to bond an FBG on a substrate as a strain sensor or as a chirp FBG spectrum-tuning device used in telecommunications. In addition, an inverse approach based on an optimization technique was developed to investigate which part of the strain distribution along the FBG causes sidebands and ripples when an FBG is stretched to become a chirped FBG (CFBG) using the substrate-straining technique. Results show that the primary influence of an unacceptable bonding layer on the strain transfer from the substrate to the FBG is near the two ends of the FBG, which causes sidebands in the reflective spectrum. Using a glue with a high shear modulus, we can increase the bonding length and reduce the bonding-layer thickness to effectively improve the strain transmissibility of the bonding layer. However, if the strain transfer from the substrate to the FBG exhibits fluctuations due to an improper bonding process or a deteriorating bonding layer, ripples occur in the corresponding wavelength spectra. The number and amplitude of the ripples correlate strongly to those of strain fluctuations in the FBG.

  13. Application of Fiber Bragg Grating for Determining Positions of Gas Absorption Lines

    Institute of Scientific and Technical Information of China (English)

    HAN Wennian; WANG Yan; MA Feng; LIU Kun; JIA Dagong; LIU Tiegen; ZHANG Hongxia

    2010-01-01

    Fiber Bragg grating(FBG)is used as a wavelength reference device to calibrate the position of gas absorption peak in the intracavity absorption gas sensor(ICAGS)based on erbium-doped fiberring laser.This system can detect both the reflectance spectrum of FBGs and absorption spectrum of measured gas during a single wavelength sweeping process by linearly varying the driving voltage of optic filter.The voltages corresponding to center wavelength positions of four FBGs in the spectrum are determined through Gaussian peak fitting.Then,the wavelengths of gas absorption lines are deduced from the correspondence between driving voltage and wavelength obtained by quadratic curve fitting.The maximum error of wavelength of acetylene absorption lines between experimental results and those from HITRAN database is 0.106 nm and the resolving accuracy of two adjacent absorption lines is about93.593%.By using this method,ICAGS can theoretically recognize the measured gas type and monitor multi-gas components.

  14. Fiber Bragg Grating Sensors Based Monitoring System for Superconducting Accelerator Magnets

    CERN Document Server

    Chiuchiolo, A; Perez, J C; Bajas, H; Consales, M; Giordano, M; Breglio, G; Cusano, A

    2014-01-01

    New generation of accelerator magnets for high energy applications currently designed, manufactured and tested at the European Organization for Nuclear Research (CERN) require the implementation of precise cryogenic sensors with long-term robustness and reliability able to withstand cryogenic temperature and to monitor the mechanical stresses affecting the winding during all the stages of his service life, assembly, cool down and powering. Monitoring the mechanical behavior of the magnet from assembly to operation is a critical task which aims to assure the integrity of the magnet and to safely handle the coils made of new brittle material. This contribution deals with the first successful embedding of Fiber Bragg Grating sensors in a subscale Nb3Sn dipole magnet in order to monitor the strain developed in the coil during the cool down to 1.9 K, the powering up to 15.8 kA and the warm up, offering new perspectives for the development of a complementary sensing technology based on fiber optic sensors.

  15. A fiber Bragg grating--bimetal temperature sensor for solar panel inverters.

    Science.gov (United States)

    Ismail, Mohd Afiq; Tamchek, Nizam; Hassan, Muhammad Rosdi Abu; Dambul, Katrina D; Selvaraj, Jeyrai; Rahim, Nasrudin Abd; Sandoghchi, Reza; Adikan, Faisal Rafiq Mahamd

    2011-01-01

    This paper reports the design, characterization and implementation of a fiber Bragg grating (FBG)-based temperature sensor for an insulted-gate Bipolar transistor (IGBT) in a solar panel inverter. The FBG is bonded to the higher coefficient of thermal expansion (CTE) side of a bimetallic strip to increase its sensitivity. Characterization results show a linear relationship between increasing temperature and the wavelength shift. It is found that the sensitivity of the sensor can be categorized into three characterization temperature regions between 26 °C and 90 °C. The region from 41 °C to 90 °C shows the highest sensitivity, with a value of 14 pm/°C. A new empirical model that considers both temperature and strain effects has been developed for the sensor. Finally, the FBG-bimetal temperature sensor is placed in a solar panel inverter and results confirm that it can be used for real-time monitoring of the IGBT temperature. PMID:22164098

  16. A fiber Bragg grating sensor for detection of liquid water in concrete structures

    International Nuclear Information System (INIS)

    Concrete structures rely greatly on the integrity of their supporting rebars to remain serviceable for their intended purposes. Unfortunately, rebars are vulnerable to corrosion due to the ingress of water from the environment, which often also carries a multitude of ionic particles that encourage corrosion. Liquid phase water may enter the structure through cracks that may not be obvious to human observation. Thus, a fiber Bragg grating sensor was designed that is able to detect (i.e. ‘on–off’) the presence of liquid water in order to provide an early warning signal for the ingress of water. Two tests were conducted to verify the functionality of the sensor: the first experiment tested the repeatability of the sensor to cyclic input of various volumes of water, and the second tested the sensor’s response to flooding conditions. The sensor showed a good repeatability, with fast response times (<10 min to reach a level guaranteeing the presence of water) and a recovery time of 11–15 h, depending on the input volume. The flooding test showed similar performance and viability of the sensor during flooding conditions. (paper)

  17. Fiber Bragg grating with polyimide-silica hybrid membrane for accurately monitoring cell growth and temperature in a photobioreactor.

    Science.gov (United States)

    Zhong, Nianbing; Liao, Qiang; Zhu, Xun; Zhao, Mingfu

    2014-09-16

    A microstructured fiber Bragg grating (MSFBG) was created to accurately and simultaneously monitor the cell growth of photosynthetic bacteria (PSB) Rhodopseudomonas palustris CQK 01 and the temperature in a photobioreactor. The proposed sensor was made from an FBG unit that was separated into three regions, an unperturbed region, and two etched regions with smooth surfaces. The unperturbed grating region was employed to monitor the temperature. To eliminate the effects of the liquid concentration and temperature on the biomass, a polyimide-silica hybrid membrane was created and coated on an etched grating region to separate the liquids from the PSB; that is, this thinned region was developed to analyze the liquid concentration and temperature. Another etched grating region with a smaller diameter was used to determine the response to the temperature, biomass, and liquid concentration. In addition, two models were also presented to demonstrate accurate simultaneous measurement of the biomass and temperature. We discovered that the MSFBG sensor can rapidly and accurately determine the difference in the Bragg wavelength shifts caused by changes in the temperature, biomass, and liquid-phase concentration. The measured biomass is highly correlated with the real cell growth, with a correlation of 0.9438; the hydrogen production rate and temperature difference from metabolic heat production reached 1.97 mmol/L/h and 2.8 °C, respectively, in the PSB culture. PMID:25166743

  18. Y-branch coupled DFB-lasers based on high-order Bragg gratings for wavelength stabilization

    International Nuclear Information System (INIS)

    Y-branch coupled distributed-feedback lasers with 40th- and 80th-order surface Bragg gratings have been fabricated using a process based on I-line wafer stepper lithography. The devices allow dual wavelength lasing at around 975 nm. Wavelength spacing of 0.5 and 4 nm have been achieved by using grating period differences of 2.9 and 47.6 nm for the 40th- and 80th-order gratings, respectively. The manufactured devices with internal wavelength stabilization work as master oscillator power amplifiers with two separate and one common amplifier sections. We present optical output characteristics of the devices under continuous wave operation. (paper)

  19. Slow Light Characteristics of Fiber Bragg Gratings%光纤Bragg光栅的慢光特性

    Institute of Scientific and Technical Information of China (English)

    尚云博

    2015-01-01

    研究了光栅长度和光栅周期对光纤Bragg光栅慢光的影响,并重点分析了优化后的慢光特性。结果表明:随着光栅长度的增大,慢光时延量整体呈现不断递增的趋势,且幅度较大,其慢光谱谐振峰两边的旁瓣加强,谱底变得非常平坦,但随着光栅周期的增大,慢光群时延量却呈现出递减的趋势,优化参数后得到了群速度为c/98的慢光。这些规律为设计新型的光纤Bragg光栅的慢光延迟器件提供理论参考。%The influence of grating length and grating period on slow light of fiber Bragg gratings was investi-gated and slow light after optimizing the parameters was presented emphatically. The results indicate that the slow light delay increases with grating length increasing and the degrees of the increasing. A certain bandwidth of reso-nance peaks on both sides of the side lobe and the peak top becomes extremely flattened. But the slow light delay decreases with grating period increasing. By optimizing the parameters,the maximum group velocity can be slowed to c/98. This provides theoretical basis for designing the slow light devices based on fiber Bragg gratings.

  20. Fiber Optic Fabry-Perot Current Sensor Integrated with Magnetic Fluid Using a Fiber Bragg Grating Demodulation

    Directory of Open Access Journals (Sweden)

    Ji Xia

    2015-07-01

    Full Text Available An optical fiber current sensor based on Fabry-Perot interferometer using a fiber Bragg grating demodulation is proposed. Magnetic fluid is used as a sensitive medium in fiber optical Fabry-Perot (F-P cavity for the optical characteristic of magnetic-controlled refractive index. A Fiber Bragg grating (FBG is connected after the F-P interferometer which is used to reflect the optical power at the Bragg wavelength of the interference transmission spectrum. The corresponding reflective power of the FBG will change with different external current intensity, due to the shift on the interference spectrum of the F-P interferometer. The sensing probe has the advantages of convenient measurement for its demodulation, low cost and high current measurement accuracy on account of its sensing structure. Experimental results show that an optimal sensitivity of 0.8522 nw/A and measurement resolution of 0.001 A is obtained with a FBG at 1550 nm with 99% reflectivity.

  1. Numerical analysis of the harmonic components of the Bragg wavelength content in spectral responses of apodized fiber Bragg gratings written by means of a phase mask with a variable phase step height.

    Science.gov (United States)

    Osuch, Tomasz

    2016-02-01

    The influence of the complex interference patterns created by a phase mask with variable diffraction efficiency in apodized fiber Bragg grating (FBGs) formation on their reflectance spectra is studied. The effect of the significant contributions of the zeroth and higher (m>±1) diffraction orders on the Bragg wavelength peak and its harmonic components is analyzed numerically. The results obtained for Gaussian and tanh apodization profiles are compared with similar data calculated for a uniform grating. It is demonstrated that when an apodized FBG is written using a phase mask with variable diffraction efficiency, significant enhancement of the harmonic components and a reduction of the Bragg wavelength peak in the grating spectral response are observed. This is particularly noticeable for the Gaussian apodization profile due to the substantial contributions of phase mask sections with relatively small phase steps in the FBG formation. PMID:26831768

  2. Damage evaluation and analysis of composite pressure vessels using fiber Bragg gratings to determine structural health

    Science.gov (United States)

    Ortyl, Nicholas E.

    2005-11-01

    The application of MEMS and nanotechnology (MNT) to the field of structural health monitoring (SHM) is a fairly recent development. The recent change in this focus for MNT has been driven by the need to expand the applications for much of the technologies that were developed in the late 1990s. In addition, many companies desire to expand beyond their target high volume market segments of automotive, wireless communications, and computer peripherals, since these market segments were not as lucrative as first predicted. Most of the aerospace structural health monitoring developmental activity has been sponsored by agencies of the U.S. Government, which serves to pace the examination of these newer technologies to some degree. With that said, efforts are underway by companies such as Acellent Technologies and Blue Road Research to explore various MNT structural health monitoring approaches. The MNT under test include embedded piezoelectric sensors, MEMS accelerometers, time domain region sensors, and topical and embedded single and multi-axis fiber optic Bragg grating sensors. The promise of MNT for the SHM market segment is very enticing. The many wireless communication developments and miniaturization developments of the past five years is very attractive to the SHM community, especially those that are able to reduce the cost and complexity of integration. The main challenge for the community is one of selective integration. That is, certain pieces may be appropriate for SHM systems and certain pieces may not be. The better companies will chose wisely and put forth an approach that can be seamlessly integrated into the larger structure. For over a decade, Blue Road Research has been developing technologies aimed at structural health monitoring of both composite and non-composite parts, through the use of single and multiaxis fiber optic Bragg grating sensors. These sensors are 80 to 120 microns in diameter making them smaller than the diameter of a human hair

  3. Advanced experimental applications for x-ray transmission gratings Spectroscopy using a novel grating fabrication method

    CERN Document Server

    Hurvitz, G; Strum, G; Shpilman, Z; Levy, I; Fraenkel, M

    2012-01-01

    A novel fabrication method for soft x-ray transmission grating and other optical elements is presented. The method uses Focused-Ion-Beam (FIB) technology to fabricate high-quality free standing grating bars on Transmission Electron Microscopy grids (TEM-grid). High quality transmission gratings are obtained with superb accuracy and versatility. Using these gratings and back-illuminated CCD camera, absolutely calibrated x-ray spectra can be acquired for soft x-ray source diagnostics in the 100-3000 eV spectral range. Double grating combinations of identical or different parameters are easily fabricated, allowing advanced one-shot application of transmission grating spectroscopy. These applications include spectroscopy with different spectral resolutions, bandwidths, dynamic ranges, and may serve for identification of high-order contribution, and spectral calibrations of various x-ray optical elements.

  4. Advanced experimental applications for x-ray transmission gratings spectroscopy using a novel grating fabrication method

    Science.gov (United States)

    Hurvitz, G.; Ehrlich, Y.; Strum, G.; Shpilman, Z.; Levy, I.; Fraenkel, M.

    2012-08-01

    A novel fabrication method for soft x-ray transmission grating and other optical elements is presented. The method uses focused-ion-beam technology to fabricate high-quality free standing grating bars on transmission electron microscopy grids. High quality transmission gratings are obtained with superb accuracy and versatility. Using these gratings and back-illuminated CCD camera, absolutely calibrated x-ray spectra can be acquired for soft x-ray source diagnostics in the 100-3000 eV spectral range. Double grating combinations of identical or different parameters are easily fabricated, allowing advanced one-shot application of transmission grating spectroscopy. These applications include spectroscopy with different spectral resolutions, bandwidths, dynamic ranges, and may serve for identification of high-order contribution, and spectral calibrations of various x-ray optical elements.

  5. Fiber Bragg Grating Sensor to Monitor Stress Kinetics in Drying Process of Commercial Latex Paints

    Directory of Open Access Journals (Sweden)

    Ivo de Lourenço

    2010-05-01

    Full Text Available In this paper, we report a study about the application of packaged fiber Bragg gratings used as strain sensors to monitor the stress kinetics during the drying process of commercial latex paints. Three stages of drying with distinct mechanical deformation and temporal behaviors were identified for the samples, with mechanical deformation from 15 μm to 21 μm in the longitudinal film dimension on time intervals from 370 to 600 minutes. Drying time tests based on human sense technique described by the Brazilian Technical Standards NBR 9558 were also done. The results obtained shows that human sense technique has a limited perception of the drying process and that the optical measurement system proposed can be used to characterize correctly the dry-through stage of paint. The influence of solvent (water addition in the drying process was also investigated. The paint was diluted with four parts paint and one part water (80% paint, and one part paint and one part water (50% paint. It was observed that the increase of the water ratio mixed into the paint decreases both the mechanical deformation magnitude and the paint dry-through time. Contraction of 5.2 μm and 10.4 μm were measured for concentrations of 50% and 80% of paint in the mixture, respectively. For both diluted paints the dry-through time was approximately 170 minutes less than undiluted paint. The optical technique proposed in this work can contribute to the development of new standards to specify the drying time of paint coatings.

  6. Real-time weigh-in-motion measurement using fiber Bragg grating sensors

    Science.gov (United States)

    Huang, Ying; Palek, Leonard; Strommen, Robert; Worel, Ben; Chen, Genda

    2014-03-01

    Overloading truck loads have long been one of the key reasons for accelerating road damage, especially in rural regions where the design loads are expected to be small and in the cold regions where the wet-and-dry cycle places a significant role. To control the designed traffic loads and further guide the road design in future, periodical weight stations have been implemented for double check of the truck loads. The weight stations give chances for missing measurement of overloaded vehicles, slow down the traffic, and require additional labors. Infrastructure weight-in-motion sensors, on the other hand, keep consistent traffic flow and monitor all types of vehicles on roads. However, traditional electrical weight-in-motion sensors showed high electromagnetic interference (EMI), high dependence on environmental conditions such as moisture, and relatively short life cycle, which are unreliable for long-term weigh-inmotion measurements. Fiber Bragg grating (FBG) sensors, with unique advantages of compactness, immune to EMI and moisture, capability of quasi-distributed sensing, and long life cycle, will be a perfect candidate for long-term weigh-in-motion measurements. However, the FBG sensors also surfer from their frangible nature of glass materials for a good survive rate during sensor installation. In this study, the FBG based weight-in-motion sensors were packaged by fiber reinforced polymer (FRP) materials and further validated at MnROAD facility, Minnesota DOT (MnDOT). The design and layout of the FRP-FBG weight-in-motion sensors, their field test setup, data acquisition, and data analysis will be presented. Upon validation, the FRP-FBG sensors can be applied weigh-in-motion measurement to assistant road managements.

  7. Lamb wave sensing using fiber Bragg grating sensors for delamination detection in composite laminates

    Science.gov (United States)

    Takeda, N.; Okabe, Y.; Kuwahara, J.; Kojima, S.

    2005-05-01

    The authors are constructing a damage detection system using ultrasonic waves. In this system, a piezo-ceramic actuator generates Lamb waves in a CFRP laminate. After the waves propagate in the laminate, transmitted waves are received by a fiber Bragg grating (FBG) sensor attached on the laminate using a newly developed high-speed optical wavelength interrogation system. At first, the optimal gauge length of the FBG to detect ultrasonic waves was investigated through theoretical simulations and experiments. Then, the directional sensitivity of the FBG to ultrasonic waves was evaluated experimentally. On the basis of the above results, the 1mm FBG sensors were applied to the detection of Lamb waves propagated in carbon fiber reinforced plastic (CFRP) cross-ply laminates. The piezo-actuator was put on the laminate about 50mm away from the FBG sensor glued on the laminate, and three-cycle sine waves of 300kHz were excited repeatedly. The waveforms obtained by the FBG showed that S0 and A0 modes could be detected appropriately. Then, artificial delamination was made in the laminate by removing of a Teflon sheet embedded in the 0/90 interface after the manufacturing. When the Lamb waves passed through the delamination, the amplitude decreased and a new wave mode appeared. These phenomena could be well simulated using a finite element method. Furthermore, since the amplitude and the velocity of the new mode increased with an increase in the delamination length, this system has a potential to evaluate the interlaminar delamination length quantitatively.

  8. Fiber Bragg grating-based performance monitoring of a slope model subjected to seepage

    Science.gov (United States)

    Zhu, Hong-Hu; Shi, Bin; Yan, Jun-Fan; Zhang, Jie; Zhang, Cheng-Cheng; Wang, Bao-Jun

    2014-09-01

    In the past few years, fiber optic sensing technologies have played an increasingly important role in the health monitoring of civil infrastructures. These innovative sensing technologies have recently been successfully applied to the performance monitoring of a series of geotechnical structures. Fiber optic sensors have shown many unique advantages in comparison with conventional sensors, including immunity to electrical noise, higher precision and improved durability and embedding capabilities; fiber optic sensors are also smaller in size and lighter in weight. In order to explore the mechanism of seepage-induced slope instability, a small-scale 1 g model test of the soil slope has been performed in the laboratory. During the model’s construction, specially fabricated sensing fibers containing nine fiber Bragg grating (FBG) strain sensors connected in a series were horizontally and vertically embedded into the soil mass. The surcharge load was applied on the slope crest, and the groundwater level inside of the slope was subsequently varied using two water chambers installed besides the slope model. The fiber optic sensing data of the vertical and horizontal strains within the slope model were automatically recorded by an FBG interrogator and a computer during the test. The test results are presented and interpreted in detail. It is found that the gradually accumulated deformation of the slope model subjected to seepage can be accurately captured by the quasi-distributed FBG strain sensors. The test results also demonstrate that the slope stability is significantly affected by ground water seepage, which fits well with the results that were calculated using finite element and limit equilibrium methods. The relationship between the strain measurements and the safety factors is further analyzed, together with a discussion on the residual strains. The performance evaluation of a soil slope using fiber optic strain sensors is proved to be a potentially effective

  9. Dual fiber Bragg gratings configuration-based fiber acoustic sensor for low-frequency signal detection

    Science.gov (United States)

    Yang, Dong; Wang, Shun; Lu, Ping; Liu, Deming

    2014-11-01

    We propose and fabricate a new type fiber acoustic sensor based on dual fiber Bragg gratings (FBGs) configuration. The acoustic sensor head is constructed by putting the sensing cells enclosed in an aluminum cylinder space built by two Cband FBGs and a titanium diaphragm of 50 um thickness. One end of each FBG is longitudinally adhered to the diaphragm by UV glue. Both of the two FBGs are employed for reflecting light. The dual FBGs play roles not only as signal transmission system but also as sensing component, and they demodulate each other's optical signal mutually during the measurement. Both of the two FBGs are pre-strained and the output optical power experiences fluctuation in a linear relationship along with a variation of axial strain and surrounding acoustic interference. So a precise approach to measure the frequency and sound pressure of the acoustic disturbance is achieved. Experiments are performed and results show that a relatively flat frequency response in a range from 200 Hz to 1 kHz with the average signal-to-noise ratio (SNR) above 21 dB is obtained. The maximum sound pressure sensitivity of 11.35mV/Pa is achieved with the Rsquared value of 0.99131 when the sound pressure in the range of 87.7-106.6dB. It has potential applications in low frequency signal detection. Owing to its direct self-demodulation method, the sensing system reveals the advantages of easy to demodulate, good temperature stability and measurement reliability. Besides, performance of the proposed sensor could be improved by optimizing the parameters of the sensor, especially the diaphragm.

  10. Fiber Bragg grating writing technique for multimode optical fibers providing stimulation of few-mode effects in measurement systems

    Science.gov (United States)

    Bourdine, Anton V.; Vasilets, Alexander A.; Burdin, Vladimir A.; Morozov, Oleg G.; Nureev, Ilnur I.; Kuznetzov, Artem A.; Faskhutdinov, Lenar M.; Kafarova, Anastasia M.; Minaeva, Alina Y.; Sevruk, Nikita L.

    2016-03-01

    This work is concerned with fiber Bragg grating (FBG) writing technique developed for graded-index multimode optical fibers applied in measurement systems based on a few-mode effects. We present some results of experimental approbation of proposed technique with Bragg wavelength 1310 and 1550 nm on samples of graded-index multimode optical fibers 50/125 of both new-generations Cat. OM2+/OM3 and old Cat. OM2 with preliminary measured refractive index profiles. While the first group fibers of Cat. OM2+/OM3 was characterized by almost ideal smooth graded refractive index profile and some fiber profile samples of this group contains thin central peak, the second fiber group profiles of Cat. OM2 differ by great central core defects representing dip or thick peak. Results of described FBG spectral response measurements under excitation of laser pigtailed by single-mode fiber are represented.

  11. Theoretical and experimental investigation of the mode-spacing of fiber Bragg grating Fabry-Perot cavity

    Institute of Scientific and Technical Information of China (English)

    Wenhua Ren; Peilin Tao; Zhongwei Tan; Yan Liu; Shuisheng Jian

    2009-01-01

    The mode-spacing of the fiber Bragg grating Fabry-Perot(FBG F-P)cavity is calculated by using the effective cavity length which contains the effective length of the FBG.The expression of the effective length,defined by using the phase-time delay,is obtained and simplified as a function of the peak reflectivity at the Bragg wavelength,the band edges,and the first zero-reflectivity wavelength.The effective length is discussed from the energy penetration depth point of view.Three FBG F-P cavities are fabricated in order to validate the effective length approach.The experimental data fits well with the theoretical predictions.The limitation of this method is also pointed out and the improved approach is proposed.

  12. A Simple Fiber Bragg Grating-Based Sensor Network Architecture with Self-Protecting and Monitoring Functions

    Science.gov (United States)

    Yeh, Chien-Hung; Chow, Chi-Wai; Wu, Ping-Chun; Tseng, Fan-Gang

    2011-01-01

    A novel fiber Bragg grating (FBG)-based passive sensor architecture, which can be used to protect the fiber cut and monitor the multiple sensors simultaneously, is proposed and experimentally demonstrated. Here, we employ a wavelength-tunable erbium-doped fiber (EDF) laser scheme with 25 km cavity length acting as the detecting light source in central office (CO). Each FBG sensor, serving as a feedback element, is used in proposed sensor architecture. By tuning the tunable bandpass filter (TBF) placing inside cavity to match the corresponding Bragg wavelength of FBG over the amplification bandwidth, we can retrieve the related wavelength lasing for the FBG sensing and monitoring simultaneously. Moreover, the survivability and capacity of the passive FBG sensor architecture can be also enhanced. PMID:22319357

  13. Subkilohertz linewidth reduction of a DFB diode laser using self-injection locking with a fiber Bragg grating Fabry-Perot cavity.

    Science.gov (United States)

    Wei, Fang; Yang, Fei; Zhang, Xi; Xu, Dan; Ding, Meng; Zhang, Li; Chen, Dijun; Cai, Haiwen; Fang, Zujie; Xijia, Gu

    2016-07-25

    A simple and low-cost 1550 nm semiconductor laser with subkilohertz intrinsic linewidth is experimentally demonstrated. A commercial distributed feedback diode laser is self-injection locked to the resonance transmission peaks of a fiber Bragg grating Fabry-Perot cavity through a polarization-maintaining fiber ring with the optical path length of 4 m, with the laser frequency noise suppressed by over 70 dB in the Fourier frequency band from 5 Hz and 1 kHz. The laser features an intrinsic Lorentzian linewidth of 125 Hz as well as a relative intensity noise of continuous tunability, which is suitable for advanced applications requiring a narrow linewidth laser with ultralow frequency noise. PMID:27464187

  14. Use of 3000 Bragg Grating Strain Sensors Distributed on Four Eight-meter Optical Fibers During Static Load Tests of a Composite Structure

    Science.gov (United States)

    Childers, Brooks A.; Froggatt, Mark E.; Allison, Sidney G.; Moore, Thomas C., Sr.; Hare, David A.; Batten, Christopher F.; Jegley, Dawn C.

    2001-01-01

    This paper describes the use of a fiber optic system to measure strain at thousands of locations along optical fibers where weakly reflecting Bragg gratings have been photoetched. The optical fibers were applied to an advanced composite transport wing along with conventional foil strain gages. A comparison of the fiber optic and foil gage systems used for this test will be presented including: a brief description of both strain data systems; a discussion of the process used for installation of the optical fiber; comparative data from the composite wing test; the processes used for the location and display of the high density fiber optic data. Calibration data demonstrating the potential accuracy of the fiber optic system will also be presented. The opportunities for industrial and commercial applications will be discussed. The fiber optic technique is shown to be a valuable augmentation to foil strain gages providing insight to structural behavior previously requiring reliance on modeling.

  15. Optical fibres sensor based in the intensity switch of a linear laser with two Bragg gratings; Sensor de fibra optica basado en el salto de intensidad de un laser lineal con dos rejillas de Bragg

    Energy Technology Data Exchange (ETDEWEB)

    Basurto P, M.A.; Kuzin, E.A.; Archundia B, C.; Marroquin, E.; May A, M.; Cerecedo N, H.H.; Sanchez M, J.J. [Departamento de Fotonica y Fisica Optica, Instituto Nacional de Astrofisica, Optica y Electronica (INAOE). Apartado Postal 51 y 216, 72000 Puebla (Mexico); Tentori S, D.; Marquez B, I.; Shliagin, M.; Miridonov, S. [Centro de Investigacion CESE (Mexico)

    2000-07-01

    In this work we propose a new configuration for an optical fiber temperature sensor, based on a linear type Er-doped fiber laser. The laser cavity consists of an Er-doped fiber and two identical Bragg gratings at the fiber ends (working as reflectors). Temperature changes are detected by measuring, through one of the gratings, the intensity variations atthe system's output. When the temperature of one of the Bragg gratings is modified, a wavelength shift of its spectral reflectivity is observed. Hence, the laser emission intensity of the system is modified. We present experimental results of the intensity switch observed when the temperature difference between the gratings detunes their spectral reflectance. Making use of this effect it is possible to develop limit comparators to bound the temperature range for the object under supervision. This limiting work can be performed with a high sensitivity using a very simple interrogation procedure. (Author)

  16. Benchmark for Peak Detection Algorithms in Fiber Bragg Grating Interrogation and a New Neural Network for its Performance Improvement

    Directory of Open Access Journals (Sweden)

    Aleksander Paterno

    2011-03-01

    Full Text Available This paper presents a benchmark for peak detection algorithms employed in fiber Bragg grating spectrometric interrogation systems. The accuracy, precision, and computational performance of currently used algorithms and those of a new proposed artificial neural network algorithm are compared. Centroid and gaussian fitting algorithms are shown to have the highest precision but produce systematic errors that depend on the FBG refractive index modulation profile. The proposed neural network displays relatively good precision with reduced systematic errors and improved computational performance when compared to other networks. Additionally, suitable algorithms may be chosen with the general guidelines presented.

  17. Generation of mode-locked optical pulses at 1035 nm from a fiber Bragg grating stabilized semiconductor laser diode

    OpenAIRE

    Teh, Peh Siong; Alam, Shaif-ul; Shepherd, David P.; Richardson, David J

    2014-01-01

    We report the generation of transform-limited, ~18 ps optical pulses from a fiber Bragg grating (FBG) stabilized semiconductor laser diode. Up to 7.2 pJ of pulse energy and a peak power of 400mW were achieved when operating at a repetition frequency of 832.6 MHz, a multiple of the cavity (diode + FBG) free spectral range (FSR). A small detuning in the repetition frequency resulted in broader optical pulses. We have shown experimentally the transition from a gain-switched regime of operation t...

  18. Using maximum spectrum of continuous wavelet transform for demodulation of an overlapped spectrum in a fiber Bragg grating sensor network.

    Science.gov (United States)

    Hu, Ying; Mo, Wenqin; Dong, Kaifeng; Jin, Fang; Song, Junlei

    2016-06-10

    The maximum spectrum of the continuous wavelet transform (MSCWT) is proposed to demodulate the central wavelengths for the overlapped spectrum in a serial fiber Bragg grating (FBG) sensing system. We describe the operation principle of the MSCWT method. Moreover, the influence of the interval gap between two FBG wavelengths, 3 dB bandwidths, and optical powers of the reflected spectra are discussed. The simulation and experimental results indicate that the MSCWT can resolve an overlapped spectrum and decode the central wavelength with high accuracy. More importantly, the proposed peak detection method can enhance the sensing capacity of a wavelength division multiplexing FBG sensor network. PMID:27409024

  19. A Novel Fiber Bragg Grating Based Sensing Methodology for Direct Measurement of Surface Strain on Body Muscles during Physical Exercises

    Science.gov (United States)

    Prasad Arudi Subbarao, Guru; Subbaramajois Narasipur, Omkar; Kalegowda, Anand; Asokan, Sundarrajan

    2012-07-01

    The present work proposes a new sensing methodology, which uses Fiber Bragg Gratings (FBGs) to measure in vivo the surface strain and strain rate on calf muscles while performing certain exercises. Two simple exercises, namely ankle dorsi-flexion and ankle plantar-flexion, have been considered and the strain induced on the medial head of the gastrocnemius muscle while performing these exercises has been monitored. The real time strain generated has been recorded and the results are compared with those obtained using a commercial Color Doppler Ultrasound (CDU) system. It is found that the proposed sensing methodology is promising for surface strain measurements in biomechanical applications.

  20. Single mode step-index polymer optical fiber for humidity insensitive high temperature fiber Bragg grating sensors

    DEFF Research Database (Denmark)

    Woyessa, Getinet; Fasano, Andrea; Stefani, Alessio;

    2016-01-01

    preform. The fabricated single-mode step-index (SI) polymer optical fiber (POF) has a 4.8µm core made from TOPAS grade 5013S-04 with a glass transition temperature of 134°C and a 150 µm cladding made from ZEONEX grade 480R with a glass transition temperature of 138°C. The key advantages of the proposed...... SIPOF are low water absorption, high operating temperature and chemical inertness to acids and bases and many polar solvents as compared to the conventional poly-methyl-methacrylate (PMMA) and polystyrene based POFs. In addition, the fiber Bragg grating writing time is short compared to microstructured...