SU-E-I-55: The Contribution to Skin Dose Due to Scatter From the Patient Table and the Head Holder During Fluoroscopy

International Nuclear Information System (INIS)

Islam, N; Xiong, Z; Vijayan, S; Rudin, S; Bednarek, D

2015-01-01

Purpose: To determine contributions to skin dose due to scatter from the table and head holder used during fluoroscopy, and also to explore alternative design material to reduce the scatter dose. Methods: Measurements were made of the primary and scatter components of the xray beam exiting the patient table and a cylindrical head holder used on a Toshiba Infinix c-arm unit as a function of kVp for the various beam filters on the machine and for various field sizes. The primary component of the beam was measured in air with the object placed close to the x-ray tube with an air gap between it and a 6 cc parallel-plate ionization chamber and with the beam collimated to a size just larger than the chamber. The primary plus scatter radiation components were measured with the object moved to a position in the beam next to the chamber for larger field sizes. Both sets of measurements were preformed while keeping the source-to-chamber distance fixed. The scatter fraction was estimated by taking the ratio of the difference between the two measurements and the reading that included both primary and scatter. Similar measurements were also made for a 2.3 cm thick Styrofoam block which could substitute for the patient support. Results: The measured scatter fractions indicate that the patient table as well as the head holder contributes an additional 10–16% to the patient entrance dose depending on field size. Forward scatter was reduced with the Styrofoam block so that the scatter fraction was about 4–5%. Conclusion: The results of this investigation demonstrated that scatter from the table and head holder used in clinical fluoroscopy contribute substantially to the skin dose. The lower contribution of scatter from Styrofoam suggests that there is an opportunity to redesign patient support accessories to reduce the skin dose. Partial support from NIH grant R01EB002873 and Toshiba Medical Systems Corporation Equipment Grant

SU-E-I-55: The Contribution to Skin Dose Due to Scatter From the Patient Table and the Head Holder During Fluoroscopy

Energy Technology Data Exchange (ETDEWEB)

Islam, N; Xiong, Z; Vijayan, S; Rudin, S; Bednarek, D [Toshiba Stroke and Vascular Research Center, University at Buffalo, Buffalo, NY (United States)

2015-06-15

Purpose: To determine contributions to skin dose due to scatter from the table and head holder used during fluoroscopy, and also to explore alternative design material to reduce the scatter dose. Methods: Measurements were made of the primary and scatter components of the xray beam exiting the patient table and a cylindrical head holder used on a Toshiba Infinix c-arm unit as a function of kVp for the various beam filters on the machine and for various field sizes. The primary component of the beam was measured in air with the object placed close to the x-ray tube with an air gap between it and a 6 cc parallel-plate ionization chamber and with the beam collimated to a size just larger than the chamber. The primary plus scatter radiation components were measured with the object moved to a position in the beam next to the chamber for larger field sizes. Both sets of measurements were preformed while keeping the source-to-chamber distance fixed. The scatter fraction was estimated by taking the ratio of the difference between the two measurements and the reading that included both primary and scatter. Similar measurements were also made for a 2.3 cm thick Styrofoam block which could substitute for the patient support. Results: The measured scatter fractions indicate that the patient table as well as the head holder contributes an additional 10–16% to the patient entrance dose depending on field size. Forward scatter was reduced with the Styrofoam block so that the scatter fraction was about 4–5%. Conclusion: The results of this investigation demonstrated that scatter from the table and head holder used in clinical fluoroscopy contribute substantially to the skin dose. The lower contribution of scatter from Styrofoam suggests that there is an opportunity to redesign patient support accessories to reduce the skin dose. Partial support from NIH grant R01EB002873 and Toshiba Medical Systems Corporation Equipment Grant.

Additive Genetic Effects on Circulating Periostin Contribute to the Heritability of Bone Microstructure.

Science.gov (United States)

Bonnet, N; Biver, E; Durosier, C; Chevalley, T; Rizzoli, R; Ferrari, S

2015-07-01

Genetic factors account for 60-80% of the areal bone mineral density (aBMD) variance, whereas the heritability of bone microstructure is not clearly established. aBMD and microstructure are under the control of osteocytes, which regulate bone formation through the expression of molecules such as sclerostin (SOST) and periostin (POSTN). We hypothesized that additive genetic effects contribute to serum levels of SOST and POSTN and thereby to the individual variance of bone microstructure. In a retrospective analysis of 432 subjects from the Geneva Retiree Cohort age 64.9 ± 1.4 years and 96 of their offspring age 37.9 ± 5.7 years, we measured serum SOST (sSOST) and serum POSTN (sPOSTN), distal radius and tibia microstructure, hip and lumbar spine aBMD, and bone turnover markers, Heritability (h(2), %) was calculated as twice the slope of the regression (β) between parents and offspring. cPOSTN levels were significantly higher in men than women and in offspring than parents. h(2) values for bone microstructural traits ranged from 22-64% depending on the envelope (trabecular [Tb] or cortical [Ct]) and skeletal site (radius or tibia), whereas h(2) for sPOSTN and sSOST was 50% and 40%, respectively. sPOSTN was positively associated with Tb bone volume on total volume and Ct thickness, and negatively with Ct porosity. The associations for Ct parameters remain significant after adjustment for propetide of type-I procollagen, cross-linked telopeptide of type I collagen, femoral neck aBMD, sex or age. After adjustment of bone traits for sPOSTN, h(2) values decreased for several Tb and Ct bone parameters, but not for aBMD. In contrast, adjusting for sSOST did not alter h(2) values for bone traits. Additive genetic effects account for a substantial proportion of the individual variance of bone microstructure, sPOSTN, and sSOST. sPOSTN is largely inherited as a sex-related trait and carries an important contribution to the heritability of bone microstructure, indicating that

Retardation of the dewetting process due to the addition of functional copolymers at polymer-polymer interfaces

CERN Document Server

Wunnicke, O; Lorenz-Haas, C; Leiner, V

2002-01-01

We studied the retardation of the dewetting process due to the addition of a functional copolymer in a polymer bilayer film. The model system consists of fully deuterated polystyrene (PS-d) on top of an amorphous polyamide (PA) sublayer on silicon substrates. Bilayer films were prepared with different content (0, 5, 10 and 30 vol. %) of a statistical copolymer (protonated styrene maleic anhydride acid (SMA2) containing 2% MA groups along the chain) being capable of forming hydrogen bonds with PA. The as-prepared as well as the annealed samples were investigated by neutron-reflectivity (NR) experiments, scanning force microscopy and optical microscopy. A significant retardation of dewetting is observed with the addition of SMA2. From model fits of NR curves the scattering length density profiles perpendicular to the sample surface were determined and an enrichment layer of SMA2 is detected. Retardation is explained by the intermixing of SMA2 and PS-d at the interface. (orig.)

The effect of additional dead space on respiratory exchange ratio and carbon dioxide production due to training.

Science.gov (United States)

Smolka, Lukasz; Borkowski, Jacek; Zaton, Marek

2014-01-01

The purpose of the study was to investigate the effects of implementing additional respiratory dead space during cycloergometry-based aerobic training. The primary outcome measures were respiratory exchange ratio (RER) and carbon dioxide production (VCO2). Two groups of young healthy males: Experimental (Exp, n = 15) and Control (Con, n = 15), participated in this study. The training consisted of 12 sessions, performed twice a week for 6 weeks. A single training session consisted of continuous, constant-rate exercise on a cycle ergometer at 60% of VO2max which was maintained for 30 minutes. Subjects in Exp group were breathing through additional respiratory dead space (1200ml), while subjects in Con group were breathing without additional dead space. Pre-test and two post-training incremental exercise tests were performed for the detection of gas exchange variables. In all training sessions, pCO2 was higher and blood pH was lower in the Exp group (p exchange ratio and carbon dioxide production.In all training sessions, respiratory acidosis was gained by experimental group only.No significant difference in RER and VCO2 between experimental and control group due to the trainings.The lack of difference in post-training values of RER and VCO2 between groups means absence of inhibition in glycolysis and glycogenolysis during exercise with additional dead space.

Media additives to promote spheroid circularity and compactness in hanging drop platform.

Science.gov (United States)

Leung, Brendan M; Lesher-Perez, Sasha Cai; Matsuoka, Toshiki; Moraes, Christopher; Takayama, Shuichi

2015-02-01

Three-dimensional spheroid cultures have become increasingly popular as drug screening platforms, especially with the advent of different high throughput spheroid forming technologies. However, comparing drug efficacy across different cell types in spheroid culture can be difficult due to variations in spheroid morphologies and transport characteristics. Improving the reproducibility of compact, circular spheroids contributes to standardizing and increasing the fidelity of the desired gradient profiles in these drug screening three-dimensional tissue cultures. In this study we discuss the role that circularity and compaction has on spheroids, and demonstrate the impact methylcellulose (MethoCel) and collagen additives in the culture media can contribute to more compact and circular spheroid morphology. We demonstrate that improved spheroid formation is not a simple function of increased viscosity of the different macromolecule additives, suggesting that other macromolecular characteristics contribute to improved spheroid formation. Of the various macromolecular additives tested for hanging drop culture, MethoCel provided the most desirable spheroid formation. Additionally, the higher viscosity of MethoCel-containing media improved the ease of imaging of cellular spheroids within hanging drop cultures by reducing motion-induced image blur.

Dislocation-free growth of quasicrystals from two seeds due to additional phasonic degrees of freedom

Science.gov (United States)

Schmiedeberg, M.; Achim, C. V.; Hielscher, J.; Kapfer, S. C.; Löwen, H.

2017-07-01

We explore the growth of two-dimensional quasicrystals, i.e., aperiodic structures that possess long-range order, from two seeds at various distances and with different orientations by using dynamical phase-field crystal calculations. We compare the results to the growth of periodic crystals from two seeds. There, a domain border consisting of dislocations is observed in case of large distances between the seed and large angles between their orientation. Furthermore, a domain border is found if the seeds are placed at a distance that does not fit to the periodic lattice. In the case of the growth of quasicrystals, we only observe domain borders for large distances and different orientations. Note that all distances do inherently not match to a perfect domain wall-free quasicrystalline structure. Nevertheless, we find dislocation-free growth for all seeds at a small enough distance and for all seeds that approximately have the same orientation. In periodic structures, the stress that occurs due to incommensurate distances between the seeds results in phononic strain fields or, in the case of too large stresses, in dislocations. In contrast, in quasicrystals an additional phasonic strain field can occur and suppress dislocations. Phasons are additional degrees of freedom that are unique to quasicrystals. As a consequence, the additional phasonic strain field helps to distribute the stress and facilitates the growth of dislocation-free quasicrystals from multiple seeds. In contrast, in the periodic case the growth from multiple seeds most likely leads to a structure with multiple domains. Our work lays the theoretical foundations for growing perfect quasicrystals from different seeds and is therefore relevant for many applications.

Repaglinide-gemfibrozil drug interaction: inhibition of repaglinide glucuronidation as a potential additional contributing mechanism.

Science.gov (United States)

Gan, Jinping; Chen, Weiqi; Shen, Hong; Gao, Ling; Hong, Yang; Tian, Yuan; Li, Wenying; Zhang, Yueping; Tang, Yuwei; Zhang, Hongjian; Humphreys, William Griffith; Rodrigues, A David

2010-12-01

To further explore the mechanism underlying the interaction between repaglinide and gemfibrozil, alone or in combination with itraconazole. Repaglinide metabolism was assessed in vitro (human liver subcellular fractions, fresh human hepatocytes, and recombinant enzymes) and the resulting incubates were analyzed, by liquid chromatography-mass spectrometry (LC-MS) and radioactivity counting, to identify and quantify the different metabolites therein. Chemical inhibitors, in addition to a trapping agent, were also employed to elucidate the importance of each metabolic pathway. Finally, a panel of human liver microsomes (genotyped for UGT1A1*28 allele status) was used to determine the importance of UGT1A1 in the direct glucuronidation of repaglinide. The results of the present study demonstrate that repaglinide can undergo direct glucuronidation, a pathway that can possibly contribute to the interaction with gemfibrozil. For example, [³H]-repaglinide formed glucuronide and oxidative metabolites (M2 and M4) when incubated with primary human hepatocytes. Gemfibrozil effectively inhibited (∼78%) both glucuronide and M4 formation, but had a minor effect on M2 formation. Concomitantly, the overall turnover of repaglinide was also inhibited (∼80%), and was completely abolished when gemfibrozil was co-incubated with itraconazole. These observations are in qualitative agreement with the in vivo findings. UGT1A1 plays a significant role in the glucuronidation of repaglinide. In addition, gemfibrozil and its glucuronide inhibit repaglinide glucuronidation and the inhibition by gemfibrozil glucuronide is time-dependent. Inhibition of UGT enzymes, especially UGT1A1, by gemfibrozil and its glucuronide is an additional mechanism to consider when rationalizing the interaction between repaglinide and gemfibrozil. © 2010 The Authors. British Journal of Clinical Pharmacology © 2010 The British Pharmacological Society.

Additives for cement compositions based on modified peat

Energy Technology Data Exchange (ETDEWEB)

Kopanitsa, Natalya, E-mail: kopanitsa@mail.ru; Sarkisov, Yurij, E-mail: sarkisov@tsuab.ru; Gorshkova, Aleksandra, E-mail: kasatkina.alexandra@gmail.com; Demyanenko, Olga, E-mail: angel-n@sibmail.com [Tomsk State University of Architecture and Building, 2, Solyanaya sq., Tomsk, 634003 (Russian Federation)

2016-01-15

High quality competitive dry building mixes require modifying additives for various purposes to be included in their composition. There is insufficient amount of quality additives having stable properties for controlling the properties of cement compositions produced in Russia. Using of foreign modifying additives leads to significant increasing of the final cost of the product. The cost of imported modifiers in the composition of the dry building mixes can be up to 90% of the material cost, depending on the composition complexity. Thus, the problem of import substitution becomes relevant, especially in recent years, due to difficult economic situation. The article discusses the possibility of using local raw materials as a basis for obtaining dry building mixtures components. The properties of organo-mineral additives for cement compositions based on thermally modified peat raw materials are studied. Studies of the structure and composition of the additives are carried out by physicochemical research methods: electron microscopy and X-ray analysis. Results of experimental research showed that the peat additives contribute to improving of cement-sand mortar strength and hydrophysical properties.

Additional signals due to negative refraction in acoustic microscopy of anisotropic plates

International Nuclear Information System (INIS)

Kozlov, A.V.; Mozhaev, V.G.

2008-01-01

The additional V(z) oscillations and pulses are predicted in the case of positive defocusing (focus above the sample surface) in acoustic microscopy of anisotropic plates exhibiting negative refraction of acoustic rays. The relationship between these additional signals and separate points on the acoustic slowness surface of the plate material is elucidated

Additional signals due to negative refraction in acoustic microscopy of anisotropic plates

Energy Technology Data Exchange (ETDEWEB)

Kozlov, A.V. [Faculty of Physics, Moscow State University, Moscow, 119991 GSP-1 (Russian Federation)], E-mail: av_kozlov@inbox.ru; Mozhaev, V.G. [Faculty of Physics, Moscow State University, Moscow, 119991 GSP-1 (Russian Federation)], E-mail: vgmozhaev@mail.ru

2008-06-23

The additional V(z) oscillations and pulses are predicted in the case of positive defocusing (focus above the sample surface) in acoustic microscopy of anisotropic plates exhibiting negative refraction of acoustic rays. The relationship between these additional signals and separate points on the acoustic slowness surface of the plate material is elucidated.

Soft and hard contributions to hard pion photoproduction

International Nuclear Information System (INIS)

Afanasev, Andrei; Carlson, Carl E.; Wahlquist, Christian

2000-01-01

Pion photoproduction at high transverse momentum supplements what can be learned in the standard probes of deep inelastic scattering and Drell-Yan processes. With polarized initial states there is sensitivity to the polarized gluon distribution, Δg, in leading order. This contrasts to other processes mentioned, which have no leading order gluon contribution. Additionally, in some kinematic regions the process occurs mainly due to pion production at short distances ('direct pion production', resulting in kinematically isolated pions), which gives sensitivity to the high-x valence quark distribution

Reggeon and pion contributions in exclusive diffractive processes at HERA

International Nuclear Information System (INIS)

Golec-Biernat, K.; Kwiecinski, J.; Szczurek, A.

1997-01-01

The contribution of subleading f 2 , ω, a 2 and ρ reggeons to the diffractive structure function F 2 D(3) (x P , β, Q 2 )are estimated. In addition we include the pion exchange which was recently found to be responsible for the violation of the Gottfried Sum Rule. The reggeon and pion contribution lead to a violation of the factorization of the diffractive structure function. The diffractive structure function is separated into the contributions with leading proton Δ (n) F 2 D /Δ (p) F 2 D as a function ox x P in the interval 10 -2 P -1 . The effect is due to the exchange of the isovector a 2 and ρ reggeons at smaller x P and the pion exchange at x P > 10 -2 . (author). 27 refs, 4 figs

Centuries of thermal sea-level rise due to anthropogenic emissions of short-lived greenhouse gases.

Science.gov (United States)

Zickfeld, Kirsten; Solomon, Susan; Gilford, Daniel M

2017-01-24

Mitigation of anthropogenic greenhouse gases with short lifetimes (order of a year to decades) can contribute to limiting warming, but less attention has been paid to their impacts on longer-term sea-level rise. We show that short-lived greenhouse gases contribute to sea-level rise through thermal expansion (TSLR) over much longer time scales than their atmospheric lifetimes. For example, at least half of the TSLR due to increases in methane is expected to remain present for more than 200 y, even if anthropogenic emissions cease altogether, despite the 10-y atmospheric lifetime of this gas. Chlorofluorocarbons and hydrochlorofluorocarbons have already been phased out under the Montreal Protocol due to concerns about ozone depletion and provide an illustration of how emission reductions avoid multiple centuries of future TSLR. We examine the "world avoided" by the Montreal Protocol by showing that if these gases had instead been eliminated in 2050, additional TSLR of up to about 14 cm would be expected in the 21st century, with continuing contributions lasting more than 500 y. Emissions of the hydrofluorocarbon substitutes in the next half-century would also contribute to centuries of future TSLR. Consideration of the time scales of reversibility of TSLR due to short-lived substances provides insights into physical processes: sea-level rise is often assumed to follow air temperature, but this assumption holds only for TSLR when temperatures are increasing. We present a more complete formulation that is accurate even when atmospheric temperatures are stable or decreasing due to reductions in short-lived gases or net radiative forcing.

Continuum contribution to excitonic four-wave mixing due to interaction-induced nonlinearities

DEFF Research Database (Denmark)

Birkedal, Dan; Vadim, Lyssenko; Hvam, Jørn Märcher

1996-01-01

We present an experimental and theoretical investigation of ultrafast transient four-wave mixing of GaAs/AlxGa1-xAs quantum wells for coherent excitation of exciton and continuum states. The signal appears at the exciton resonance and is shown to consist of two contributions: an intense spectrall...

Original contributions

African Journals Online (AJOL)

hefere

Original contributions ... Results suggest that there is a significant positive ... psychological abuse, including economic abuse, intimidation, harassment, stalking, damage ... or maintaining the structure and function of the African home (Alio et al., 2011; Jewkes,. Levin ... Revictimisation occurs due to emotional violence and.

Editorial Note: Reevaluating Book Reviews: As Scientific Contributions

Directory of Open Access Journals (Sweden)

Günter Mey

2000-12-01

Full Text Available In the first part of this text, I would like to describe some advantages book reviews offer. The book reviews—providing the fact that they succeed in offering more than just a short content description to the reader—can also contribute to scientific discourses in a similar way regular contributions do. One of the reasons why book reviews currently often do not fulfil this possible function is due to the existing restrictions within traditional print media publishing. Additionally worth mentioning are actual standards within the scientific community which tend to underestimate the value of book reviews or review essays. In the second part, I will discuss some developmental potentials in book reviews which up to now were hardly recognized: Especially with the Internet and its characteristics-nearly unlimited space resources; flexible publishing time and design of the contributions; chance for a direct exchange between researchers, for example using discussion boards—a re-evaluation of book reviews and review essays seems to be possible and reasonable. URN: urn:nbn:de:0114-fqs0003400

Assessment of doses due to secondary neutrons received by patient treated by proton therapy

International Nuclear Information System (INIS)

Sayah, R.; Martinetti, F.; Donadille, L.; Clairand, I.; Delacroix, S.; De Oliveira, A.; Herault, J.

2010-01-01

Proton therapy is a specific technique of radiotherapy which aims at destroying cancerous cells by irradiating them with a proton beam. Nuclear reactions in the device and in the patient himself induce secondary radiations involving mainly neutrons which contribute to an additional dose for the patient. The author reports a study aimed at the assessment of these doses due to secondary neutrons in the case of ophthalmological and intra-cranial treatments. He presents a Monte Carlo simulation of the room and of the apparatus, reports the experimental validation of the model (dose deposited by protons in a water phantom, ambient dose equivalent due to neutrons in the treatment room, absorbed dose due to secondary particles in an anthropomorphic phantom), and the assessment with a mathematical phantom of doses dues to secondary neutrons received by organs during an ophthalmological treatment. He finally evokes current works of calculation of doses due to secondary neutrons in the case of intra-cranial treatments

Dose due to 40K

International Nuclear Information System (INIS)

Escareno J, E.; Vega C, H. R.

2011-10-01

The dose due to 40 K has been estimated. Potassium is one of the most abundant elements in nature, being approximately 2% of the Earth's crust. Potassium has three isotopes 39 K, 40 K and 41 K, two are stable while 40 K is radioactive with a half life of 1.2x10 9 years; there is 0.0117% 40 K-to-K ratio. Potassium plays an important role in plants, animals and humans growth and reproduction. Due to the fact that K is an essential element for humans, 40 K is the most abundant radioisotope in human body. In order to keep good health conditions K must be intake at daily basis trough food and beverages, however when K in ingested above the requirements produce adverse health effects in persons with renal, cardiac and hypertension problems or suffering diabetes. In 89.3% 40 K decays to 40 C through β-decay, in 10.3% decays through electronic capture and emitting 1.46 MeV γ-ray. K is abundant in soil, construction materials, sand thus γ-rays produced during 40 K decay contribute to external dose. For K in the body practically all 40 K decaying energy is absorbed by the body; thus 40 K contributes to total dose in humans and it is important to evaluate its contribution. In this work a set of 40 K sources were prepared using different amounts of KCl salt, a γ-ray spectrometer with a NaI(Tl) was characterized to standardized the sources in order to evaluate the dose due to 40 K. Using thermoluminescent dosemeters the dose due to 40 K was measured and related to the amount of 40 K γ-ray activity. (Author)

Experimental investigations of the hydrogen addition effects on diesel engine performance

Science.gov (United States)

Mirica, I.; Pana, C.; Negurescu, N.; Cernat, A.; Nutu, C.

2016-08-01

In the global content regarding the impact on the environmental of the gases emissions resulted from the fossil fuels combustion, an interest aspect discussed on the 21st Session of the Conference of the Parties from the 2015 Paris Climate Conference and the gradual diminution of the worldwide oil reserves contribute to the necessity of searching of alternative energy from durable and renewable resources. At the use of hydrogen as addition in air to diesel engine, the level of CO, HC and smoke from the exhaust gases will decrease due to the improvement of the combustion process. At low and medium partial loads and low hydrogen energetic ratios used the NOX emission level can decrease comparative to classic diesel engine. The hydrogen use as fuel for diesel engine leads to the improving of the energetic and emissions performance of the engine due to combustion improvement and reduction of carbon content. The paper presents, in a comparative way, results of the experimental researches carried on a truck compression ignition engine fuelled with diesel fuel and with hydrogen diesel fuel and hydrogen as addition in air at different engine operation regimes. The results obtained during experimental investigations show better energetic and pollution performance of the engine fuelled with hydrogen as addition in air comparative to classic engine. The influences of hydrogen addition on engine operation are shown.

Effective Dose Equivalent To The Cypriot Population Due To Natural Radiation

Energy Technology Data Exchange (ETDEWEB)

Christofides, S [Medical Physics Department, Nicosia General Hospital (Cyprus)

1994-12-31

A study was initiated by the Biomedical Research Foundation, two years ago, to estimate the various natural radiation components that contribute to the Effective Dose Equivalent (EDE) to the Cypriot population. The present study has shown that the contribution due to cosmic radiation is estimated to be less than 270 microSiverts per annum, while that due to airborne Rn-222 concentration in Cypriot houses is estimated to be less then 330 microSieverts per annum. The contribution due to terrestrial gamma radiations, which is currently under investigation, is so far estimated to be around 108 microSieverts per annum. Therefore the EDE to the Cypriot population due to natural radiation is likely to be around 700 microSieverts per annum, not taking into account the internal exposure due to other naturally occuring radionuclides. (author). 7 refs, 4 figs, 4 tabs.

Long-term nitrogen addition leads to loss of species richness due to litter accumulation and soil acidification in a temperate steppe.

Science.gov (United States)

Fang, Ying; Xun, Fen; Bai, Wenming; Zhang, Wenhao; Li, Linghao

2012-01-01

Although community structure and species richness are known to respond to nitrogen fertilization dramatically, little is known about the mechanisms underlying specific species replacement and richness loss. In an experiment in semiarid temperate steppe of China, manipulative N addition with five treatments was conducted to evaluate the effect of N addition on the community structure and species richness. Species richness and biomass of community in each plot were investigated in a randomly selected quadrat. Root element, available and total phosphorus (AP, TP) in rhizospheric soil, and soil moisture, pH, AP, TP and inorganic N in the soil were measured. The relationship between species richness and the measured factors was analyzed using bivariate correlations and stepwise multiple linear regressions. The two dominant species, a shrub Artemisia frigida and a grass Stipa krylovii, responded differently to N addition such that the former was gradually replaced by the latter. S. krylovii and A. frigida had highly-branched fibrous and un-branched tap root systems, respectively. S. krylovii had higher height than A. frigida in both control and N added plots. These differences may contribute to the observed species replacement. In addition, the analysis on root element and AP contents in rhizospheric soil suggests that different calcium acquisition strategies, and phosphorus and sodium responses of the two species may account for the replacement. Species richness was significantly reduced along the five N addition levels. Our results revealed a significant relationship between species richness and soil pH, litter amount, soil moisture, AP concentration and inorganic N concentration. Our results indicate that litter accumulation and soil acidification accounted for 52.3% and 43.3% of the variation in species richness, respectively. These findings would advance our knowledge on the changes in species richness in semiarid temperate steppe of northern China under N

Impaired oxidative capacity due to decreased CPT1b levels as a contributing factor to fat accumulation in obesity

DEFF Research Database (Denmark)

Ratner, Cecilia; Madsen, Andreas Nygaard; Kristensen, Line Vildbrad

2015-01-01

In order to characterize mechanisms responsible for fat accumulation we used a selectively bred obesity-prone (OP) and obesity-resistant (OR) rat model, where the rats were fed a Western diet for 76 days. Body composition was assessed by MRI scans and as expected the OP rats developed a higher...... likewise had higher RER values indicating that this trait may be a primary and contributing factor to their obese phenotype. When the adult obese rats were exposed to the orexigenic and adipogenic hormone ghrelin, we observed increased RER values in both OP and OR rats, while OR rats were more sensitive...... to ghrelin's orexigenic effects as well as ghrelin-induced attenuation of activity and energy expenditure. Thus, increased fat accumulation characterizing obesity may be caused by impaired oxidative capacity due to decreased carnitine palmitoyltransferase 1b levels in the white adipose tissue, while ghrelin...

Modifications in concrete superficial properties due to the use of different formworkrelease agents and plastic additives

Directory of Open Access Journals (Sweden)

Beltramone, A.

2003-06-01

Full Text Available The actual research study, carried out in the Laboratory of Construction Materials of the ETSAM., analyses the modifications in superficial properties (regarding colour and texture of grey Portland cement mortars due to the use of different formworks release agents (car oil, mineral oil and paraffin and to the addition of plastic superplasticiser to the mixture (Bettor and Sika trademarks. Once the test samples were obtained, a digital registration was made by giving them values in terms of colour and texture observed changes using computer programmes, referring those values to the test specimen (only cement, no additives. A migration of the polymeric particles of the additives towards the surface was observed, presenting the following modifications: Colour: darker hues than those of the test specimen sample were registered in the specimens with additives. Texture: the texture of the test specimen containing additives such as modified polycarboxilic ethers, polycarboxilic ethers; modified organic polymers and modified synthetic melamine were much smoother than the one in test specimen. Test specimens containing melamine, condensed naftalensulphate and polycarboxilic derivatives were a bit rougher but still smoother than the test specimen. The same variation of results as for the colour properties was obtained for the texture as regards to the use of formworks release agents, varying from smoothest to roughest with the car oil.

El presente estudio experimental, realizado en las instalaciones del Laboratorio de Materiales de Construcción de la ETSAM, analiza las modificaciones de las propiedades superficiales observadas (en cuanto a color y textura en morteros de cemento portland gris, por la utilización de desencofrantes diversos (aceite de automóvil, aceite mineral y desencofrante parafínico, y la incorporación de aditivos superfluidificantes plásticos en la mezcla (de las marcas Bettor y Sika. Una vez obtenidas las diferentes

ADDITIVES USED TO OBTAIN FOOD

Directory of Open Access Journals (Sweden)

Dorina Ardelean

2012-01-01

Full Text Available Use of food additives in food is determined by the growth of contemporary food needs of the world population. Additives used in food, both natural and artificial ones, contribute to: improving the organoleptic characteristics and to preserve the food longer, but we must not forget that all these additives should not be found naturally in food products. Some of these additives are not harmful and human pests in small quantities, but others may have harmful effects on health.

Additive conjoint measurement for multiattribute utility

NARCIS (Netherlands)

Maas, A.; Wakker, P.P.

1994-01-01

This paper shows that multiattribute utility can be simplified by methods from additive conjoint measurement. Given additive conjoint measurability under certainty, axiomatizations can be simplified, and implementation and reliability of elicitation can be improved. This also contributes to the

The contribution from psychological, social, and organizational work factors to risk of disability retirement

DEFF Research Database (Denmark)

Knardahl, Stein; Johannessen, Håkon A.; Sterud, Tom

2017-01-01

Background: Previous studies indicate that psychological, social, and organizational factors at work contribute to health, motivation, absence from work, and functional ability. The objective of the study was to assess the current state of knowledge of the contribution of psychological, social, a...... social support from ones superior. Conclusions: Psychological and organizational factors at work contribute to disability retirement with the most robust evidence for the role of work control. We recommend the measurement of specific exposure factors in future studies.......Background: Previous studies indicate that psychological, social, and organizational factors at work contribute to health, motivation, absence from work, and functional ability. The objective of the study was to assess the current state of knowledge of the contribution of psychological, social......, and organizational factors to disability retirement by a systematic review and meta-analyses. Methods: Data sources: A systematic literature search for studies of retirement due to disability in Medline, Embase, and PsychINFO was performed. Reference lists of relevant articles were hand-searched for additional...

Dose due to {sup 40}K

Energy Technology Data Exchange (ETDEWEB)

Escareno J, E.; Vega C, H. R., E-mail: edmundoej@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Calle Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

2011-10-15

The dose due to {sup 40}K has been estimated. Potassium is one of the most abundant elements in nature, being approximately 2% of the Earth's crust. Potassium has three isotopes {sup 39}K, {sup 40}K and {sup 41}K, two are stable while {sup 40}K is radioactive with a half life of 1.2x10{sup 9} years; there is 0.0117% {sup 40}K-to-K ratio. Potassium plays an important role in plants, animals and humans growth and reproduction. Due to the fact that K is an essential element for humans, {sup 40}K is the most abundant radioisotope in human body. In order to keep good health conditions K must be intake at daily basis trough food and beverages, however when K in ingested above the requirements produce adverse health effects in persons with renal, cardiac and hypertension problems or suffering diabetes. In 89.3% {sup 40}K decays to {sup 40}C through {beta}-decay, in 10.3% decays through electronic capture and emitting 1.46 MeV {gamma}-ray. K is abundant in soil, construction materials, sand thus {gamma}-rays produced during {sup 40}K decay contribute to external dose. For K in the body practically all {sup 40}K decaying energy is absorbed by the body; thus {sup 40}K contributes to total dose in humans and it is important to evaluate its contribution. In this work a set of {sup 40}K sources were prepared using different amounts of KCl salt, a {gamma}-ray spectrometer with a NaI(Tl) was characterized to standardized the sources in order to evaluate the dose due to {sup 40}K. Using thermoluminescent dosemeters the dose due to {sup 40}K was measured and related to the amount of {sup 40}K {gamma}-ray activity. (Author)

Electromagnetically induced transparency and absorption due to optical and ground-state coherences in 6Li

International Nuclear Information System (INIS)

Fuchs, J; Duffy, G J; Rowlands, W J; Lezama, A; Hannaford, P; Akulshin, A M

2007-01-01

We present an experimental study of sub-natural width resonances in fluorescence from a collimated beam of 6 Li atoms excited on the D 1 and D 2 lines by a bichromatic laser field. We show that in addition to ground-state Zeeman coherence, coherent population oscillations between ground and excited states contribute to the sub-natural resonances. High-contrast resonances of electromagnetically induced transparency and electromagnetically induced absorption due to both effects, i.e., ground-state Zeeman coherence and coherent population oscillations, are observed

Irradiation creep due to SIPA-induced growth

International Nuclear Information System (INIS)

Woo, C.H.

1980-01-01

An additional contribution to irradiation creep resulting from the stress-induced preferred adsorption (SIPA) effect is described - SIPA-induced growth (SIG). The mechanism of SIG is discussed and an expression for its contribution to irradiation creep developed. It is shown that SIG is very significant in comparison with SIPA. Enhancement of creep by swelling may also occur. (U.K.)

Nobel Prizes: Contributions to Cardiology

International Nuclear Information System (INIS)

Mesquita, Evandro Tinoco; Marchese, Luana de Decco; Dias, Danielle Warol; Barbeito, Andressa Brasil; Gomes, Jonathan Costa; Muradas, Maria Clara Soares; Lanzieri, Pedro Gemal; Gismondi, Ronaldo Altenburg

2015-01-01

The Nobel Prize was created by Alfred Nobel. The first prize was awarded in 1901 and Emil Adolf von Behring was the first laureate in medicine due to his research in diphtheria serum. Regarding cardiology, Nobel Prize’s history permits a global comprehension of progress in pathophysiology, diagnosis and therapeutics of various cardiac diseases in last 120 years. The objective of this study was to review the major scientific discoveries contemplated by Nobel Prizes that contributed to cardiology. In addition, we also hypothesized why Carlos Chagas, one of our most important scientists, did not win the prize in two occasions. We carried out a non-systematic review of Nobel Prize winners, selecting the main studies relevant to heart diseaseamong the laureates. In the period between 1901 and 2013, 204 researches and 104 prizes were awarded in Nobel Prize, of which 16 (15%) studies were important for cardiovascular area. There were 33 (16%) laureates, and two (6%) were women. Fourteen (42%) were American, 15 (45%) Europeans and four (13%) were from other countries. There was only one winner born in Brazil, Peter Medawar, whose career was all in England. Reviewing the history of the Nobel Prize in physiology or medicine area made possible to identify which researchers and studies had contributed to advances in the diagnosis, prevention and treatment of cardiovascular diseases. Most winners were North Americans and Europeans, and male

Nobel Prizes: Contributions to Cardiology

Energy Technology Data Exchange (ETDEWEB)

Mesquita, Evandro Tinoco; Marchese, Luana de Decco; Dias, Danielle Warol; Barbeito, Andressa Brasil; Gomes, Jonathan Costa; Muradas, Maria Clara Soares; Lanzieri, Pedro Gemal; Gismondi, Ronaldo Altenburg, E-mail: ronaldo@floralia.com.br [Universidade Federal Fluminense, Niterói, RJ (Brazil)

2015-08-15

The Nobel Prize was created by Alfred Nobel. The first prize was awarded in 1901 and Emil Adolf von Behring was the first laureate in medicine due to his research in diphtheria serum. Regarding cardiology, Nobel Prize’s history permits a global comprehension of progress in pathophysiology, diagnosis and therapeutics of various cardiac diseases in last 120 years. The objective of this study was to review the major scientific discoveries contemplated by Nobel Prizes that contributed to cardiology. In addition, we also hypothesized why Carlos Chagas, one of our most important scientists, did not win the prize in two occasions. We carried out a non-systematic review of Nobel Prize winners, selecting the main studies relevant to heart diseaseamong the laureates. In the period between 1901 and 2013, 204 researches and 104 prizes were awarded in Nobel Prize, of which 16 (15%) studies were important for cardiovascular area. There were 33 (16%) laureates, and two (6%) were women. Fourteen (42%) were American, 15 (45%) Europeans and four (13%) were from other countries. There was only one winner born in Brazil, Peter Medawar, whose career was all in England. Reviewing the history of the Nobel Prize in physiology or medicine area made possible to identify which researchers and studies had contributed to advances in the diagnosis, prevention and treatment of cardiovascular diseases. Most winners were North Americans and Europeans, and male.

Addition Table of Colours: Additive and Subtractive Mixtures Described Using a Single Reasoning Model

Science.gov (United States)

Mota, A. R.; Lopes dos Santos, J. M. B.

2014-01-01

Students' misconceptions concerning colour phenomena and the apparent complexity of the underlying concepts--due to the different domains of knowledge involved--make its teaching very difficult. We have developed and tested a teaching device, the addition table of colours (ATC), that encompasses additive and subtractive mixtures in a single…

Recent Changes in Land Water Storage and Its Contribution to Sea Level Variations

Science.gov (United States)

Wada, Yoshihide; Reager, John T.; Chao, Benjamin F.; Wang, Jida; Lo, Min-Hui; Song, Chunqiao; Li, Yuwen; Gardner, Alex S.

2016-01-01

Sea level rise is generally attributed to increased ocean heat content and increased rates glacier and ice melt. However, human transformations of Earth's surface have impacted water exchange between land, atmosphere, and ocean, ultimately affecting global sea level variations. Impoundment of water in reservoirs and artificial lakes has reduced the outflow of water to the sea, while river runoff has increased due to groundwater mining, wetland and endorheic lake storage losses, and deforestation. In addition, climate-driven changes in land water stores can have a large impact on global sea level variations over decadal timescales. Here, we review each component of negative and positive land water contribution separately in order to highlight and understand recent changes in land water contribution to sea level variations.

Impact on short-lived climate forcers increases projected warming due to deforestation.

Science.gov (United States)

Scott, C E; Monks, S A; Spracklen, D V; Arnold, S R; Forster, P M; Rap, A; Äijälä, M; Artaxo, P; Carslaw, K S; Chipperfield, M P; Ehn, M; Gilardoni, S; Heikkinen, L; Kulmala, M; Petäjä, T; Reddington, C L S; Rizzo, L V; Swietlicki, E; Vignati, E; Wilson, C

2018-01-11

The climate impact of deforestation depends on the relative strength of several biogeochemical and biogeophysical effects. In addition to affecting the exchange of carbon dioxide (CO 2 ) and moisture with the atmosphere and surface albedo, vegetation emits biogenic volatile organic compounds (BVOCs) that alter the formation of short-lived climate forcers (SLCFs), which include aerosol, ozone and methane. Here we show that a scenario of complete global deforestation results in a net positive radiative forcing (RF; 0.12 W m -2 ) from SLCFs, with the negative RF from decreases in ozone and methane concentrations partially offsetting the positive aerosol RF. Combining RFs due to CO 2 , surface albedo and SLCFs suggests that global deforestation could cause 0.8 K warming after 100 years, with SLCFs contributing 8% of the effect. However, deforestation as projected by the RCP8.5 scenario leads to zero net RF from SLCF, primarily due to nonlinearities in the aerosol indirect effect.

Polonium-210 concentration of cigarettes traded in Cuba and their estimated dose contribution due to smoking

International Nuclear Information System (INIS)

Brigido Flores, O.; Montalvan Estrada, A.; Fabelo Bonet, O.; Barreras Caballero, A.

2015-01-01

Cigarette smoking is one of the pathways that might contribute significantly to the increase in the radiation dose reaching man, due to the relatively large concentrations of polonium-210 found in tobacco leaves. The results of 200 Po determination on the 11 most frequently smoked brands of cigarettes and cigars which constitute over 75% of the total cigarette consumption in Cuba are presented and discussed. Moreover, the polonium content in cigarette smoke was estimated on the basis of its activity in cigarettes, ash, fresh filters and post-smoking filters. 210 Po was determined by gas flow proportional detector after spontaneous deposition of 210 Po on a high copper-content disk. The annual committed equivalent dose for lungs and the annual effective dose for smokers between 12-17 years old and for adults were calculated on the basis of the 210 Po inhalation through cigarette smoke. The results showed concentration ranging from 9.3 to 14.4 mBq per cigarette with a mean value of 11.8 ± 0.6 mBq.Cig -1 . the results of this work indicate that Cuban smokers who smoke one pack (20 cigarettes) per day inhale from 62 to 98 mBq.d -1 of 210 Po and smokers between 12-17 years old who consume 10 cigarettes daily inhale from 30-50 mBq.d -1 . The average committed equivalent dose for lungs is estimated to be 466 ± 36 and 780 ± 60 μSv.year -1 for young and adult smokers, respectively and annual committed effective dose is calculated to be 60 ± 5 and 100 ± 8 μSv for these two groups of smokers, respectively. (Author)

Prevalence of phosphorus containing food additives in grocery stores

Directory of Open Access Journals (Sweden)

Janeen B. Leon

2012-06-01

In conclusion, phosphorus additives are commonly present in groceries and contribute significantly to the phosphorus content of foods. Moreover, phosphorus additive foods are less costly than additive-free foods. As a result, phosphorus additives may be an important contributor to hyperphosphatemia among persons with chronic kidney disease

Fragile X-associated primary ovarian insufficiency: evidence for additional genetic contributions to severity.

Science.gov (United States)

Hunter, Jessica Ezzell; Epstein, Michael P; Tinker, Stuart W; Charen, Krista H; Sherman, Stephanie L

2008-09-01

The fragile X mental retardation gene (FMR1) contains a CGG repeat sequence in its 5' untranslated region that can become unstable and expand in length from generation to generation. Alleles with expanded repeats in the range of approximately 55-199, termed premutation alleles, are associated with an increased risk for fragile-X-associated primary ovarian insufficiency (FXPOI). However, not all women who carry the premutation develop FXPOI. To determine if additional genes could explain variability in onset and severity, we used a random-effects Cox proportional hazards model to analyze age at menopause on 680 women from 225 families who have a history of fragile X syndrome and 321 women from 219 families from the general population. We tested for the presence of a residual additive genetic effect after adjustment for FMR1 repeat length, race, smoking, body mass index, and method of ascertainment. Results showed significant familial aggregation of age at menopause with an estimated additive genetic variance of 0.55-0.96 depending on the parameterization of FMR1 repeat size and definition of age at menopause (P-values ranging between 0.0002 and 0.0027). This is the first study to analyze familial aggregation of FXPOI. This result is important for proper counseling of women who carry FMR1 premutation alleles and for guidance of future studies to identify additional genes that influence ovarian insufficiency. (c) 2008 Wiley-Liss, Inc.

Studies of computed tomography as a contribution to differential diagnosis between dementia due to cerebrovascular disease (multi-infract type) and due to primarily degenerative cerebral atrophy (Alzheimers type)

International Nuclear Information System (INIS)

Kohlmeyer, K.

1982-01-01

Studies of computed tomography were performed in 367 patients diagnosed as dementia clinically. The mean age was 70.1 years. By the clinicians 240 were classified as senile dementia of Alzheimer's type, 79 as multiinfarct dementia, and 48 were not determined definitely. In 3%, the CT studies did detect treatable causes like tumors, subdural hematomas and communicating hydrocephalus. In about 57% was found by CT a diffuse brain atrophy without focal tissue changes as to expect if occurring a cerebrovascular disease. In 25% there were focal changes of the brain tissue in CT to define as residuals of infarctions in addition to the signs of cerebral atrophy. The results of the CT studies were normal in 15% despite of the evidence of dementia clinically. The analysis of the material did show that a cerebrovascular disease as a cause of dementia is suspected clinically in much more cases than CT studies are able to prove focal pathological changes of the brain tissue due to disorders of cerebral blood flow really. (orig.) [de

CONTRIBUTIONS TO THE FUNCTIONAL MORPHOLOGY OF ...

African Journals Online (AJOL)

CONTRIBUTIONS TO THE FUNCTIONAL MORPHOLOGY OF FISHES ... The exact phylogeny of the chimaeroids is obscure due to difficulties encountered in ...... species was obtained from the University of Cape Town Ecological Records;.

Pre- and post-experimental manipulation assessments confirm the increase in number of birds due to the addition of nest boxes

Directory of Open Access Journals (Sweden)

Cecilia Cuatianquiz Lima

2016-03-01

Full Text Available Secondary cavity nesting (SCN birds breed in holes that they do not excavate themselves. This is possible where there are large trees whose size and age permit the digging of holes by primary excavators and only rarely happens in forest plantations, where we expected a deficit of both breeding holes and SCN species. We assessed whether the availability of tree cavities influenced the number of SCNs in two temperate forest types, and evaluated the change in number of SCNs after adding nest boxes. First, we counted all cavities within each of our 25-m radius sampling points in mature and young forest plots during 2009. We then added nest boxes at standardised locations during 2010 and 2011 and conducted fortnightly bird counts (January–October 2009–2011. In 2011 we added two extra plots of each forest type, where we also conducted bird counts. Prior to adding nest boxes, counts revealed more SCNs in mature than in young forest. Following the addition of nest boxes, the number of SCNs increased significantly in the points with nest boxes in both types of forest. Counts in 2011 confirmed the increase in number of birds due to the addition of nest boxes. Given the likely benefits associated with a richer bird community we propose that, as is routinely done in some countries, forest management programs preserve old tree stumps and add nest boxes to forest plantations in order to increase bird numbers and bird community diversity.

Pre- and post-experimental manipulation assessments confirm the increase in number of birds due to the addition of nest boxes.

Science.gov (United States)

Cuatianquiz Lima, Cecilia; Macías Garcia, Constantino

2016-01-01

Secondary cavity nesting (SCN) birds breed in holes that they do not excavate themselves. This is possible where there are large trees whose size and age permit the digging of holes by primary excavators and only rarely happens in forest plantations, where we expected a deficit of both breeding holes and SCN species. We assessed whether the availability of tree cavities influenced the number of SCNs in two temperate forest types, and evaluated the change in number of SCNs after adding nest boxes. First, we counted all cavities within each of our 25-m radius sampling points in mature and young forest plots during 2009. We then added nest boxes at standardised locations during 2010 and 2011 and conducted fortnightly bird counts (January-October 2009-2011). In 2011 we added two extra plots of each forest type, where we also conducted bird counts. Prior to adding nest boxes, counts revealed more SCNs in mature than in young forest. Following the addition of nest boxes, the number of SCNs increased significantly in the points with nest boxes in both types of forest. Counts in 2011 confirmed the increase in number of birds due to the addition of nest boxes. Given the likely benefits associated with a richer bird community we propose that, as is routinely done in some countries, forest management programs preserve old tree stumps and add nest boxes to forest plantations in order to increase bird numbers and bird community diversity.

Pre- and post-experimental manipulation assessments confirm the increase in number of birds due to the addition of nest boxes

Science.gov (United States)

Cuatianquiz Lima, Cecilia

2016-01-01

Secondary cavity nesting (SCN) birds breed in holes that they do not excavate themselves. This is possible where there are large trees whose size and age permit the digging of holes by primary excavators and only rarely happens in forest plantations, where we expected a deficit of both breeding holes and SCN species. We assessed whether the availability of tree cavities influenced the number of SCNs in two temperate forest types, and evaluated the change in number of SCNs after adding nest boxes. First, we counted all cavities within each of our 25-m radius sampling points in mature and young forest plots during 2009. We then added nest boxes at standardised locations during 2010 and 2011 and conducted fortnightly bird counts (January–October 2009–2011). In 2011 we added two extra plots of each forest type, where we also conducted bird counts. Prior to adding nest boxes, counts revealed more SCNs in mature than in young forest. Following the addition of nest boxes, the number of SCNs increased significantly in the points with nest boxes in both types of forest. Counts in 2011 confirmed the increase in number of birds due to the addition of nest boxes. Given the likely benefits associated with a richer bird community we propose that, as is routinely done in some countries, forest management programs preserve old tree stumps and add nest boxes to forest plantations in order to increase bird numbers and bird community diversity. PMID:26998410

A theoretical contribution to the contemporary migration: a socio-philosophical reflection

Directory of Open Access Journals (Sweden)

Ana PASCARU

2016-07-01

Full Text Available Nowadays we witness an increased use of information & communication technologies (ICT which contributed to important changes in the world due to the Globalization process. Additionally, Globalization and ICT increased the movement of people or the so called migration. The migratory flows have increased considerably in the last decades. Due to this, there is a need to review the migration theories through the lens of the ICT. The analyses of migration and ICT lay the premises for a knowledge-based society. This paper focuses on the migration theories, starting from the dominant and oldest theory explaining the causes of migration. Hereinafter, it discusses the neoclassical theory and the human capital approach, the new economics of migration, network and institutional theory. Thus, there have been many attempts to explain migration from different perspectives but what becomes clear nowadays is that there is still request for more analyses considering updated perspectives.

Irreversible climate change due to carbon dioxide emissions

Science.gov (United States)

Solomon, Susan; Plattner, Gian-Kasper; Knutti, Reto; Friedlingstein, Pierre

2009-01-01

The severity of damaging human-induced climate change depends not only on the magnitude of the change but also on the potential for irreversibility. This paper shows that the climate change that takes place due to increases in carbon dioxide concentration is largely irreversible for 1,000 years after emissions stop. Following cessation of emissions, removal of atmospheric carbon dioxide decreases radiative forcing, but is largely compensated by slower loss of heat to the ocean, so that atmospheric temperatures do not drop significantly for at least 1,000 years. Among illustrative irreversible impacts that should be expected if atmospheric carbon dioxide concentrations increase from current levels near 385 parts per million by volume (ppmv) to a peak of 450–600 ppmv over the coming century are irreversible dry-season rainfall reductions in several regions comparable to those of the “dust bowl” era and inexorable sea level rise. Thermal expansion of the warming ocean provides a conservative lower limit to irreversible global average sea level rise of at least 0.4–1.0 m if 21st century CO2 concentrations exceed 600 ppmv and 0.6–1.9 m for peak CO2 concentrations exceeding ≈1,000 ppmv. Additional contributions from glaciers and ice sheet contributions to future sea level rise are uncertain but may equal or exceed several meters over the next millennium or longer. PMID:19179281

Influence Of The Social Contributions On The Enterprise Behaviour

Directory of Open Access Journals (Sweden)

Nicoleta MIHĂILĂ

2012-06-01

Full Text Available The current fiscal system comprises a multitude of taxes, dues and contributions which the enterprise has to pay. The large number of taxes and dues to be paid put a high fiscal pressure on the enterprise and the social contributions are a determining factor in the manifestation of the fiscal behaviour of the enterprises. The employer has to pay to the state a significant proportion of the gross wage of the employee, almost 30%, which includes: the contribution to the social insurances, the contribution to the unemployment fund, the contribution to the Single National Fund for Health Social Insurance, the contribution to the guarantee fund for wages, the contribution to the health insurances, the contribution to the fund for accidents and the fee for the Chamber of Labour. The employee must also pay the state a total of 32.5% which consists of the contribution to the social insurances, the contribution to the unemployment fund, the contribution to the health insurances and the income tax. A simple calculation shows that the net income of the employee from his/her gross income is much lower than the revenue to the state from this wage. The state charges a burdening 45% on each job, while the employee earns almost 55%. This percentage is an obstacle for business development in Romania, where the labour force is overtaxed. Within this context, the pressure presumed by any increase of the minimal national wage is very strong for the employers and it generates unemployment, informal work and tax evasion.

Gluonic contributions in the chiral hyperbag

International Nuclear Information System (INIS)

Park, B.Y.; Vento, V.; Valencia Univ./CSIC, Valencia

1990-01-01

We incorporate into a non-perturbative chiral bag model scheme the gluons and the η' in a perturbative fashion. We analyze in this context the proton matrix element for the flavor singlet axial current, where due account is taken of the anomaly, and the delta-nucleon mass difference. Our results show that the contribution due to the gluons is significant for large bag radii and that they are crucial in order to establish the Cheshire cat principle. (orig.)

Supportive treatment in weight-losing cancer patients due to the additive adverse effects of radiation treatment and/or chemotherapy

Energy Technology Data Exchange (ETDEWEB)

Erkurt, E.; Tunali, C. [Cukurova University Medical Faculty, Dept. of Radiation Oncology, Balcali-Adana (Turkey); Erkisi, M. [Cukurova University Medical Faculty, Dept. of Medical Oncology (Turkey)

2000-12-01

The reversal of anorexia and weight loss especially in patients with advanced cancer suffering from radiation treatment (RT) -related complications and debilitated further during RT would be a welcome relief. The purpose of this study is to evaluate the feasibility of supportive treatment with megestrol acetate (MA) in the weight-losing cancer patients increasingly experiencing anorexia, smell, taste, and weight loss due to the additive adverse effects of RT plus or minus chemotherapy and how MA changes the additive role of the severity of RT reactions on such patients. >From June 1997 to October 1998, 100 eligible patients were enrolled on a randomized, placebo-controlled clinical trial. Of the 100 patients, 46 received MA during RT and 4 after the end of the RT, and 50 received placebo for 3 months. Subjective parameters were assessed by a brief questionnaire form based on scoring from 1 to 5, according to the degree of the loss or change for each parameter of malnutrition, appetite, taste and smell developed by the researchers. At the end of the study a statistically significant weight gain was achieved in the patient group receiving MA compared to the placebo group (+ 3 to + 5 kg versus -3.7 to -5.9 kg, p=0.000). Significant improvements were seen in performance status (p=0.000), appetite (p=0.000), malnutrition (p=0.000), loss of taste (p=0.000) and smell qualities (p=0.02) in the MA group compared to the placebo group. In the MA group there was no statistically significant difference related to the weight changes according to the grade of either the acute or late RT effects (p=0.65 and 0.07, respectively). Whereas, in the placebo group a statistically significant additive effect of the acute and late RT effects was detected on weight loss (p=0.008 and 0.007, respectively). It was observed no side-effects of MA in a 3-month time follow-up. The use of MA 480 mg/day during RT was effective in reversing anorexia and weight loss in spite of the acute RT effects

Supportive treatment in weight-losing cancer patients due to the additive adverse effects of radiation treatment and/or chemotherapy

International Nuclear Information System (INIS)

Erkurt, E.; Tunali, C.; Erkisi, M.

2000-01-01

The reversal of anorexia and weight loss especially in patients with advanced cancer suffering from radiation treatment (RT) -related complications and debilitated further during RT would be a welcome relief. The purpose of this study is to evaluate the feasibility of supportive treatment with megestrol acetate (MA) in the weight-losing cancer patients increasingly experiencing anorexia, smell, taste, and weight loss due to the additive adverse effects of RT plus or minus chemotherapy and how MA changes the additive role of the severity of RT reactions on such patients. From June 1997 to October 1998, 100 eligible patients were enrolled on a randomized, placebo-controlled clinical trial. Of the 100 patients, 46 received MA during RT and 4 after the end of the RT, and 50 received placebo for 3 months. Subjective parameters were assessed by a brief questionnaire form based on scoring from 1 to 5, according to the degree of the loss or change for each parameter of malnutrition, appetite, taste and smell developed by the researchers. At the end of the study a statistically significant weight gain was achieved in the patient group receiving MA compared to the placebo group (+ 3 to + 5 kg versus -3.7 to -5.9 kg, p=0.000). Significant improvements were seen in performance status p=0.000), appetite (p=0.000), malnutrition (p=0.000), loss of taste (p=0.000) and smell qualities (p=0.02) in the MA group compared to the placebo group. In the MA group there was no statistically significant difference related to the weight changes according to the grade of either the acute or late RT effects (p=0.65 and 0.07, respectively). Whereas, in the placebo group a statistically significant additive effect of the acute and late RT effects was detected on weight loss (p=0.008 and 0.007, respectively). It was observed no side-effects of MA in a 3-month time follow-up. The use of MA 480 mg/day during RT was effective in reversing anorexia and weight loss in spite of the acute RT effects, and

Evaluation of cytogenetic effects in some occupational groups exposed to mutagenic action due to the Chernobyl accident

International Nuclear Information System (INIS)

Pilinskaya, M.A.; Pilinskij, V.V.

1995-01-01

12 persons, that live on territories contaminated by radionuclides and are exposed to additional irradiation due to their occupational activity, are cytogenetic ally examined. The most serious cytogenetic effect was in the group of tractor-drivers from the Polesskoe region of the Kyiv district (average frequency of unstable chromosome aberrations - 2.51 per 100 cells, stable chromosome aberrations - 1.44 per 100 cells), where the density of 137 Cs-contamination ran up to 26 Ci/km 2 . The received data confirm the importance of contribution of the occupational radiation component to genetic effects in the population of areas contaminated after the Chernobyl accident

Alternative additives; Alternative additiver

Energy Technology Data Exchange (ETDEWEB)

2007-08-15

In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations aiming at reducing corrosion or slagging related problems. The following products have been obtained, characterised and evaluated: 1) Brewery draff 2) Danish de-gassed manure 3) Paper sludge 4) Moulding sand 5) Spent bleaching earth 6) Anorthosite 7) Sand 8) Clay-sludge. Most of the above alternative additive candidates are deemed unsuitable due to insufficient chemical effect and/or expensive requirements for pre-treatment (such as drying and transportation). 3 products were selected for full-scale testing: de-gassed manure, spent bleaching earth and clay slugde. The full scale tests were undertaken at the biomass-fired power stations in Koege, Slagelse and Ensted. Spent bleaching earth (SBE) and clay sludge were the only tested additive candidates that had a proven ability to react with KCl, to thereby reduce Cl-concentrations in deposits, and reduce the deposit flux to superheater tubes. Their performance was shown to nearly as good as commercial additives. De-gassed manure, however, did not evaluate positively due to inhibiting effects of Ca in the manure. Furthermore, de-gassed manure has a high concentration of heavy metals, which imposes a financial burden with regard to proper disposal of the ash by-products. Clay-sludge is a wet clay slurring, and drying and transportation of this product entails substantial costs. Spent bleaching does not require much pre-treatment and is therefore the most promising alternative additive. On the other hand, bleaching earth contains residual plant oil which means that a range of legislation relating to waste combustion comes into play. Not least a waste combustion fee of 330 DKK/tonne. For all alternative (and commercial) additives disposal costs of the increase ash by-products represents a significant cost. This is

Effect of trace addition of al on microstructure, texture and tensile ductility of Mg-6Zn-0.5Er alloy

Directory of Open Access Journals (Sweden)

Xiaobing Zheng

2016-06-01

Full Text Available The effects of trace addition of Al on the microstructure and mechanical properties of the as-extruded Mg-6Zn-0.5Er alloy were investigated in the present investigation. The results showed that the trace addition of Al affected the mechanical properties significantly. The elongation of the extruded alloy was improved markedly from 17 to 25% with the trace addition of Al. It is suggested that the improvement of ductility was mainly attributed to the modification of basal texture of the as-extruded alloy, resulting from the complete dynamic recrystallization due to the trace addition of Al. In addition, the existence of the complete dynamic recrystallization led to an obvious increase in the number fraction of high angle grain boundaries, the average misorientation angle and Schmid factors for the (0001 〈112¯0〉 slip, which also have contributed to the improvement of ductility.

Hygienic estimation of population doses due to stratospheric fallout

International Nuclear Information System (INIS)

Marej, A.N.; Knizhnikov, V.A.

1980-01-01

The hygienic estimation of external and internal irradiation of the USSR population due to stratospheric global fallouts of fission products after nuclear explosions and weapon tests, is carried out. Numerical values which characterize the dose-effect dependence in the case of radiation of marrow, bone tissue and whole body are presented. Values of mean individual and population doses of irradiation due to global fallouts within 1963-1975, types of injury and the number of mortal cases due to malignant neoplasms are presented. A conclusion is made that the contribution of radiation due to stratospheric fallouts in the mortality due to malignant neoplasms is insignificant. Annual radiation doses, conditioned by global fallouts within the period of 1963-1975 constitute but several percent from the dose of radiation of the natural radiation background. Results of estimation of genetic consequences of irradiation due to atmospheric fallouts are presented

Thermal paint production: the techno-economic evaluation of muscovite as insulating additive.

Directory of Open Access Journals (Sweden)

Gabriela Fernandes Ribas

2016-09-01

Full Text Available Muscovite is known by its thermal and electrical insulating properties. Based on this, it was hypothesized that its addition on paints should increase the thermal resistance. The use of muscovite as mineral insulating is pointed out as advantageous due to its low cost compared to other materials used for this purpose, such as the ceramic microsphere. The use of a low cost material could open the access to the medium and low income families, implying two aspects: the life quality increase by thermal comfort and the increase of energy saving. Thus, this part of the population could open a new market to thermal paints. Aiming to contribute to this issue, this work evaluated the thermal insulation performance of commercial paints containing muscovite additions and determined the economic evaluation for its industrial production. The thermal paint was formulated by adding 10%, 20% and 40% of muscovite to the commercial paint. This was applied on steel reinforced mortar boards. Thermal insulation tests were carried out in bench scale using an adapted box. The economic evaluation of the industrial production of muscovite-based thermal paint was conducted, considering the Brazilian economic market in this activity. The results showed its ability as an insulating agent due to a reduction of 0.667 °C/mm board by the addition of 40% muscovite. The economic analysis also demonstrated the feasibility of the thermal paint industrial production. The payback is favorable to 5 years when compared to the Selic short-term lending rate, with 21.53% of internal rate return and a net present value of US$ 15,085.76.

Thomas Young's contributions to geometrical optics.

Science.gov (United States)

Atchison, David A; Charman, W Neil

2011-07-01

In addition to his work on physical optics, Thomas Young (1773-1829) made several contributions to geometrical optics, most of which received little recognition in his time or since. We describe and assess some of these contributions: Young's construction (the basis for much of his geometric work), paraxial refraction equations, oblique astigmatism and field curvature, and gradient-index optics. © 2011 The Authors. Clinical and Experimental Optometry © 2011 Optometrists Association Australia.

26 CFR 31.3302(b)-1 - Additional credit against tax.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Additional credit against tax. 31.3302(b)-1... credit against tax. (a) In general. In addition to the credit against the tax allowable for contributions... credit allowable against the tax for such year shall be the aggregate of the additional credits allowable...

Explaining the Microtubule Energy Balance: Contributions Due to Dipole Moments, Charges, van der Waals and Solvation Energy

Directory of Open Access Journals (Sweden)

Ahmed Taha Ayoub

2017-09-01

Full Text Available Microtubules are the main components of mitotic spindles, and are the pillars of the cellular cytoskeleton. They perform most of their cellular functions by virtue of their unique dynamic instability processes which alternate between polymerization and depolymerization phases. This in turn is driven by a precise balance between attraction and repulsion forces between the constituents of microtubules (MTs—tubulin dimers. Therefore, it is critically important to know what contributions result in a balance of the interaction energy among tubulin dimers that make up microtubules and what interactions may tip this balance toward or away from a stable polymerized state of tubulin. In this paper, we calculate the dipole–dipole interaction energy between tubulin dimers in a microtubule as part of the various contributions to the energy balance. We also compare the remaining contributions to the interaction energies between tubulin dimers and establish a balance between stabilizing and destabilizing components, including the van der Waals, electrostatic, and solvent-accessible surface area energies. The energy balance shows that the GTP-capped tip of the seam at the plus end of microtubules is stabilized only by − 9 kcal/mol, which can be completely reversed by the hydrolysis of a single GTP molecule, which releases + 14 kcal/mol and destabilizes the seam by an excess of + 5 kcal/mol. This triggers the breakdown of microtubules and initiates a disassembly phase which is aptly called a catastrophe.

Using SNP markers to estimate additive, dominance and imprinting genetic variance

DEFF Research Database (Denmark)

Lopes, M S; Bastiaansen, J W M; Janss, Luc

The contributions of additive, dominance and imprinting effects to the variance of number of teats (NT) were evaluated in two purebred pig populations using SNP markers. Three different random regression models were evaluated, accounting for the mean and: 1) additive effects (MA), 2) additive...... and dominance effects (MAD) and 3) additive, dominance and imprinting effects (MADI). Additive heritability estimates were 0.30, 0.28 and 0.27-0.28 in both lines using MA, MAD and MADI, respectively. Dominance heritability ranged from 0.06 to 0.08 using MAD and MADI. Imprinting heritability ranged from 0.......01 to 0.02. Dominance effects make an important contribution to the genetic variation of NT in the two lines evaluated. Imprinting effects appeared less important for NT than additive and dominance effects. The SNP random regression model presented and evaluated in this study is a feasible approach...

An Inventory of Methods for the Assessment of Additive Increased Addictiveness of Tobacco Products.

Science.gov (United States)

van de Nobelen, Suzanne; Kienhuis, Anne S; Talhout, Reinskje

2016-07-01

Cigarettes and other forms of tobacco contain the addictive drug nicotine. Other components, either naturally occurring in tobacco or additives that are intentionally added during the manufacturing process, may add to the addictiveness of tobacco products. As such, these components can make cigarette smokers more easily and heavily dependent.Efforts to regulate tobacco product dependence are emerging globally. Additives that increase tobacco dependence will be prohibited under the new European Tobacco Product Directive. This article provides guidelines and recommendations for developing a regulatory strategy for assessment of increase in tobacco dependence due to additives. Relevant scientific literature is summarized and criteria and experimental studies that can define increased dependence of tobacco products are described. Natural tobacco smoke is a very complex matrix of components, therefore analysis of the contribution of an additive or a combination of additives to the level of dependence on this product is challenging. We propose to combine different type of studies analyzing overall tobacco product dependence potential and the functioning of additives in relation to nicotine. By using a combination of techniques, changes associated with nicotine dependence such as behavioral, physiological, and neurochemical alterations can be examined to provide sufficient information.Research needs and knowledge gaps will be discussed and recommendations will be made to translate current knowledge into legislation. As such, this article aids in implementation of the Tobacco Product Directive, as well as help enable regulators and researchers worldwide to develop standards to reduce dependence on tobacco products. This article provides an overall view on how to assess tobacco product constituents for their potential contribution to use and dependence. It provides guidelines that help enable regulators worldwide to develop standards to reduce dependence on tobacco products

Allelic heterogeneity and genetic modifier loci contribute to clinical variation in males with X-linked retinitis pigmentosa due to RPGR mutations.

Directory of Open Access Journals (Sweden)

Abigail T Fahim

Full Text Available Mutations in RPGR account for over 70% of X-linked retinitis pigmentosa (XlRP, characterized by retinal degeneration and eventual blindness. The clinical consequences of RPGR mutations are highly varied, even among individuals with the same mutation: males demonstrate a wide range of clinical severity, and female carriers may or may not be affected. This study describes the phenotypic diversity in a cohort of 98 affected males from 56 families with RPGR mutations, and demonstrates the contribution of genetic factors (i.e., allelic heterogeneity and genetic modifiers to this diversity. Patients were categorized as grade 1 (mild, 2 (moderate or 3 (severe according to specific clinical criteria. Patient DNAs were genotyped for coding SNPs in 4 candidate modifier genes with products known to interact with RPGR protein: RPGRIP1, RPGRIP1L, CEP290, and IQCB1. Family-based association testing was performed using PLINK. A wide range of clinical severity was observed both between and within families. Patients with mutations in exons 1-14 were more severely affected than those with ORF15 mutations, and patients with predicted null alleles were more severely affected than those predicted to make RPGR protein. Two SNPs showed association with severe disease: the minor allele (N of I393N in IQCB1 (p = 0.044 and the common allele (R of R744Q in RPGRIP1L (p = 0.049. These data demonstrate that allelic heterogeneity contributes to phenotypic diversity in XlRP and suggest that this may depend on the presence or absence of RPGR protein. In addition, common variants in 2 proteins known to interact with RPGR are associated with severe disease in this cohort.

Energy deposition by heavy ions: additivity of kinetic and potential energy contributions in hillock formation on CaF2.

Science.gov (United States)

Wang, Y Y; Grygiel, C; Dufour, C; Sun, J R; Wang, Z G; Zhao, Y T; Xiao, G Q; Cheng, R; Zhou, X M; Ren, J R; Liu, S D; Lei, Y; Sun, Y B; Ritter, R; Gruber, E; Cassimi, A; Monnet, I; Bouffard, S; Aumayr, F; Toulemonde, M

2014-07-18

Modification of surface and bulk properties of solids by irradiation with ion beams is a widely used technique with many applications in material science. In this study, we show that nano-hillocks on CaF2 crystal surfaces can be formed by individual impact of medium energy (3 and 5 MeV) highly charged ions (Xe(22+) to Xe(30+)) as well as swift (kinetic energies between 12 and 58 MeV) heavy xenon ions. For very slow highly charged ions the appearance of hillocks is known to be linked to a threshold in potential energy (Ep) while for swift heavy ions a minimum electronic energy loss per unit length (Se) is necessary. With our results we bridge the gap between these two extreme cases and demonstrate, that with increasing energy deposition via Se the Ep-threshold for hillock production can be lowered substantially. Surprisingly, both mechanisms of energy deposition in the target surface seem to contribute in an additive way, which can be visualized in a phase diagram. We show that the inelastic thermal spike model, originally developed to describe such material modifications for swift heavy ions, can be extended to the case where both kinetic and potential energies are deposited into the surface.

Continuum contribution to excitonic four-wave mixing due to interaction-induced nonlinearities: A numerical study

DEFF Research Database (Denmark)

Sayed, Karim El; Birkedal, Dan; Vadim, Lyssenko

1997-01-01

We present a theoretical investigation of ultrafast transient four-wave mixing (FWM) of GaAs quantum wells for coherent excitation of excitons and a large number of continuum states. It is shown that in this case the line shape of the FWM signal is drastically altered due to an interaction-induce...

Lanthanum additions and the toughness of ultra-high strength steels and the determination of appropriate lanthanum additions

International Nuclear Information System (INIS)

Garrison, Warren M.; Maloney, James L.

2005-01-01

Studies of commercial heats of AF1410 steel suggest that under appropriate conditions additions of rare-earth elements can significantly enhance fracture toughness. This improvement in toughness is not due to an extremely low inclusion volume fraction but is apparently due to the formation of larger and more widely spaced inclusions. The purpose of this work is to discuss our experience in using rare-earth additions to laboratory scale vacuum induction melted and subsequently vacuum arc remelted heats of ultra-high strength steels to achieve inclusion distributions similar to those observed in commercial heats modified with lanthanum additions. The results indicate that lanthanum additions of 0.015 wt.% to low sulfur steels which have been well deoxidized using carbon-vacuum deoxidation can result in lanthanum rich inclusions which are similar in size, volume fraction and spacing to those obtained in commercially produced heats of ultra-high strength steel to which lanthanum has been added. The heat of steel to which lanthanum additions of 0.015 wt.% were made had significantly higher toughness than did the heat of the same steel in which the sulfur had been gettered as small and closely spaced particles of MnS and which had an inclusion volume fraction similar to that of the heat modified by the addition of 0.015 wt.% lanthanum. This improvement in toughness was attributed to an increase in inclusion spacing. An addition of 0.06 wt.% lanthanum was excessive. Such an addition of lanthanum resulted in a huge volume fraction of large cuboidal inclusions which primarily contain lanthanum and oxygen and which are extremely detrimental to toughness

Quantitative investigation of physical factors contributing to gold nanoparticle-mediated proton dose enhancement

International Nuclear Information System (INIS)

Cho, Jongmin; Manohar, Nivedh; Kerr, Matthew; Cho, Sang Hyun; Gonzalez-Lepera, Carlos; Krishnan, Sunil

2016-01-01

Some investigators have shown tumor cell killing enhancement in vitro and tumor regression in mice associated with the loading of gold nanoparticles (GNPs) before proton treatments. Several Monte Carlo (MC) investigations have also demonstrated GNP-mediated proton dose enhancement. However, further studies need to be done to quantify the individual physical factors that contribute to the dose enhancement or cell-kill enhancement (or radiosensitization). Thus, the current study investigated the contributions of particle-induced x-ray emission (PIXE), particle-induced gamma-ray emission (PIGE), Auger and secondary electrons, and activation products towards the total dose enhancement. Specifically, GNP-mediated dose enhancement was measured using strips of radiochromic film that were inserted into vials of cylindrical GNPs, i.e. gold nanorods (GNRs), dispersed in a saline solution (0.3 mg of GNRs/g or 0.03% of GNRs by weight), as well as vials containing water only, before proton irradiation. MC simulations were also performed with the tool for particle simulation code using the film measurement setup. Additionally, a high-purity germanium detector system was used to measure the photon spectrum originating from activation products created from the interaction of protons and spherical GNPs present in a saline solution (20 mg of GNPs/g or 2% of GNPs by weight). The dose enhancement due to PIXE/PIGE recorded on the films in the GNR-loaded saline solution was less than the experimental uncertainty of the film dosimetry (<2%). MC simulations showed highly localized dose enhancement (up to a factor 17) in the immediate vicinity (<100 nm) of GNRs, compared with hypothetical water nanorods (WNRs), mostly due to GNR-originated Auger/secondary electrons; however, the average dose enhancement over the entire GNR-loaded vial was found to be minimal (0.1%). The dose enhancement due to the activation products from GNPs was minimal (<0.1%) as well. In conclusion, under the

Migrants and Refugees in Europe: Challenges, Experiences and Contributions.

Science.gov (United States)

Schilling, Tobias; Rauscher, Stephan; Menzel, Christian; Reichenauer, Simon; Müller-Schilling, Martina; Schmid, Stephan; Selgrad, Michael

2017-08-01

Due to the current geopolitical situation more refugees from crisis countries were and will be treated in Europe. In 2015 the number of displaced people reached an unprecedented level, with more than one million crossing into Europe. The migration itself can impair both mental and physical health. Therefore, the provision of medical care for refugees and migrants is a novel and major challenge for the health care systems in Europe. In this article we describe our experiences and contribution in providing medical care for refugees who have newly arrived in Stuttgart, Baden-Wuerttemberg, Germany. Furthermore, we report our experiences from a tertiary referral University center in Regensburg, Bavaria, Germany. We focus on challenges in both the outpatient and the inpatient setting, with a special focus on intensive care patients. In addition, we provide an overview about the spectrum of diseases in this specific patient cohort.

Instanton contributions in reggeon quantum mechanics

International Nuclear Information System (INIS)

Ciafaloni, M.

1978-01-01

The full semiclassical approximation to reggeon field theory without transverse dimensions is derived. By using Polyakov's method in Lagrangian form and paying due attention to the quantum terms of the potential it is shown that instanton contributions are able to explain the tunnel-like energy gap for α(0)-1>>lambda. (Auth.)

Risks due to fires at Big Rock Point

International Nuclear Information System (INIS)

Brinsfield, W.A.; Blanchard, D.P.

1983-01-01

The unique and older designs of the Big Rock Point nuclear plant is such that fires contribute significantly to the probability of core damage predicted in the probabilistic risk assessment performed for this plant. The methodology employed to determine this contribution reflects the unique, as constructed, plant design, while systematically and logically addressing the true effect of fires on the operation of the plant and the safety of the public. As a result of the methodology utilized in the PRA, recommendations are made which minimize the risk of core damage due to fires. Included in these recommendations is a proposal for equipment and controls to be included on the Big Rock Point alternate shutdown panel

Synthesis, characterization and magnetorheological properties of carbonyl iron suspension with superparamagnetic nanoparticles as an additive

International Nuclear Information System (INIS)

Leong, Siti Asma’ Nikmat; Mohd Samin, Pakharuddin; Idris, Ani; Rahman, Azura Hanis A; Mazlan, Saiful Amri

2016-01-01

Magnetorheological (MR) fluids are suspensions of micron-sized particles dispersed in carrier fluid. Due to high density magnetic particles, MR fluids are facing the problem with the instability of the suspension caused by high settling rate. Recently, researches have been conducted on the advantages of using the mixture of magnetic nanoparticles and microparticles, called bidisperse MR fluids. However, even though the sedimentation stability is improved, there is a reduction in dynamic yield stress when the nanoparticle is introduced. In this work, the investigation of magnetic iron nanoparticles (γ-Fe 2 O 3 ) as an additive to magnetic carbonyl iron (CI) suspension has been proposed so as to improve the sedimentation stability and redispersibility, but at the same time enhance the MR performance. The results indicated that the addition of nanoparticles reduced the sedimentation rate, improved redispersibility and enhanced the rheological performance of MR fluids as the particle fill the voids between the microparticles and strengthened the interparticle chains contributing to well-arranged particle structures. (paper)

EVAPORATION: a new vapour pressure estimation methodfor organic molecules including non-additivity and intramolecular interactions

Directory of Open Access Journals (Sweden)

S. Compernolle

2011-09-01

Full Text Available We present EVAPORATION (Estimation of VApour Pressure of ORganics, Accounting for Temperature, Intramolecular, and Non-additivity effects, a method to predict (subcooled liquid pure compound vapour pressure p⁰ of organic molecules that requires only molecular structure as input. The method is applicable to zero-, mono- and polyfunctional molecules. A simple formula to describe log₁₀p⁰(T is employed, that takes into account both a wide temperature dependence and the non-additivity of functional groups. In order to match the recent data on functionalised diacids an empirical modification to the method was introduced. Contributions due to carbon skeleton, functional groups, and intramolecular interaction between groups are included. Molecules typically originating from oxidation of biogenic molecules are within the scope of this method: aldehydes, ketones, alcohols, ethers, esters, nitrates, acids, peroxides, hydroperoxides, peroxy acyl nitrates and peracids. Therefore the method is especially suited to describe compounds forming secondary organic aerosol (SOA.

Contribution of maternal age and pregnancy checkbox on maternal mortality ratios in the United States, 1978-2012.

Science.gov (United States)

Davis, Nicole L; Hoyert, Donna L; Goodman, David A; Hirai, Ashley H; Callaghan, William M

2017-09-01

Maternal mortality ratios (MMR) appear to have increased in the United States over the last decade. Three potential contributing factors are (1) a shifting maternal age distribution, (2) changes in age-specific MMR, and (3) the addition of a checkbox indicating recent pregnancy on the death certificate. To determine the contribution of increasing maternal age on changes in MMR from 1978 to 2012 and estimate the contribution of the pregnancy checkbox on increases in MMR over the last decade. Kitagawa decomposition analyses were conducted to partition the maternal age contribution to the MMR increase into 2 components: changes due to a shifting maternal age distribution and changes due to greater age-specific mortality ratios. We used National Vital Statistics System natality and mortality data. The following 5-year groupings were used: 1978-1982, 1988-1992, 1998-2002, and 2008-2012. Changes in age-specific MMRs among states that adopted the standard pregnancy checkbox onto their death certificate before 2008 (n = 23) were compared with states that had not adopted the standard pregnancy checkbox on their death certificate by the end of 2012 (n = 11) to estimate the percentage increase in the MMR due to the pregnancy checkbox. Overall US MMRs for 1978-1982, 1988-1992, and 1998-2002 were 9.0, 8.1, and 9.1 deaths per 100,000 live births, respectively. There was a modest increase in the MMR between 1998-2002 and 2008-2012 in the 11 states that had not adopted the standard pregnancy checkbox on their death certificate by the end of 2012 (8.6 and 9.9 deaths per 100,000, respectively). However, the MMR more than doubled between 1998-2002 and 2008-2012 in the 23 states that adopted the standard pregnancy checkbox (9.0-22.4); this dramatic increase was almost entirely attributable to increases in age-specific MMRs (94.9%) as opposed to increases in maternal age (5.1%), with an estimated 90% of the observed change reflecting the change in maternal death identification rather

Nonlinear gain suppression in semiconductor lasers due to carrier heating

International Nuclear Information System (INIS)

Willatzen, M.; Uskov, A.; Moerk, J.; Olesen, H.; Tromborg, B.; Jauho, A.P.

1991-01-01

We present a simple model for carrier heating in semiconductor lasers, from which the temperature dynamics of the electron and hole distributions can be calculated. Analytical expressions for two new contributions to the nonlinear gain coefficient ε are derived, which reflect carrier heating due to stimulated emission and free carrier absorption. In typical cases, carrier heating and spectral holeburning are found to give comparable contributions to nonlinear gain suppression. The results are in good agreement with recent measurements on InGaAsP laser diodes. (orig.)

Lise meitner and her contribution to the discovery of nuclear fission

International Nuclear Information System (INIS)

Dai Hongyi; Wang Shangwu

1999-01-01

Lise Meitner, a famous nuclear physicist in both theory and experiment, played a unique role and made outstanding contributions in the course of the discovery of nuclear fission reviewed. However, due to a variety of reasons, her great contributions were not recognized during her time

Non-additive Effects in Genomic Selection

Directory of Open Access Journals (Sweden)

Luis Varona

2018-03-01

Full Text Available In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii they allow the definition of mate allocation procedures between candidates for selection; and (iii they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection.

Additional symmetries of supersymmetric KP hierarchies

International Nuclear Information System (INIS)

Stanciu, S.

1993-09-01

We investigate the additional symmetries of several supersymmetric KP hierarchies: The SKP hierarchy of Manin and Radul, the SKP 2 hierarchy, and the Jacobian SKP hierarchy. The main technical tool is the supersymmetric generalisation of a map originally due to Radul between the Lie algebra of superdifferential operators and the Lie algebra of vector fields on the space of supersymmetric Lax operators. In the case of the Manin-Radul SKP hierarchy we identify additional symmetries which form an algebra isomorphic to a subalgebra of superdifferential operators; whereas in the case of the Jacobian SKP, the (additional) symmetries are identified with the algebra itself. (orig.)

Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

Directory of Open Access Journals (Sweden)

Larissa A. R. U. Freitas

2017-07-01

Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

Age hardening in die-cast Mg–Al–RE alloys due to minor Mn additions

Energy Technology Data Exchange (ETDEWEB)

Zhu, S.M., E-mail: suming.zhu@rmit.edu.au [School Engineering, RMIT University, Carlton, Victoria 3053 (Australia); Department of Materials Science and Engineering, Monash University, Victoria 3800 (Australia); Abbott, T.B. [School Engineering, RMIT University, Carlton, Victoria 3053 (Australia); Department of Materials Science and Engineering, Monash University, Victoria 3800 (Australia); Magontec Limited, Sydney, New South Wales 2000 (Australia); Gibson, M.A. [School Engineering, RMIT University, Carlton, Victoria 3053 (Australia); Department of Materials Science and Engineering, Monash University, Victoria 3800 (Australia); CSIRO Manufacturing Flagship, Clayton, Victoria 3168 (Australia); Nie, J.F. [Department of Materials Science and Engineering, Monash University, Victoria 3800 (Australia); Easton, M.A. [School Engineering, RMIT University, Carlton, Victoria 3053 (Australia)

2016-02-22

Die-cast Mg–Al–rare earth (RE) alloys are normally used in the as-cast condition without the application of heat treatment because it is a common perception that heat treatment will not provide benefit to these alloys. This paper reports, for the first time, that enhanced age hardenability can be achieved in die-cast Mg–Al–RE alloys with minor Mn additions. For example, the yield strength of Mg–4 wt%Al–3 wt%La alloy with 0.32 wt% Mn is increased by ∼34 MPa (∼26%) after ageing at 200 °C for 32 h (T5). The enhanced age hardenability is associated with the precipitation of nanoscale Al–Mn particles during ageing.

Dissection of additive, dominance, and imprinting effects for production and reproduction traits in Holstein cattle.

Science.gov (United States)

Jiang, Jicai; Shen, Botong; O'Connell, Jeffrey R; VanRaden, Paul M; Cole, John B; Ma, Li

2017-05-30

Although genome-wide association and genomic selection studies have primarily focused on additive effects, dominance and imprinting effects play an important role in mammalian biology and development. The degree to which these non-additive genetic effects contribute to phenotypic variation and whether QTL acting in a non-additive manner can be detected in genetic association studies remain controversial. To empirically answer these questions, we analyzed a large cattle dataset that consisted of 42,701 genotyped Holstein cows with genotyped parents and phenotypic records for eight production and reproduction traits. SNP genotypes were phased in pedigree to determine the parent-of-origin of alleles, and a three-component GREML was applied to obtain variance decomposition for additive, dominance, and imprinting effects. The results showed a significant non-zero contribution from dominance to production traits but not to reproduction traits. Imprinting effects significantly contributed to both production and reproduction traits. Interestingly, imprinting effects contributed more to reproduction traits than to production traits. Using GWAS and imputation-based fine-mapping analyses, we identified and validated a dominance association signal with milk yield near RUNX2, a candidate gene that has been associated with milk production in mice. When adding non-additive effects into the prediction models, however, we observed little or no increase in prediction accuracy for the eight traits analyzed. Collectively, our results suggested that non-additive effects contributed a non-negligible amount (more for reproduction traits) to the total genetic variance of complex traits in cattle, and detection of QTLs with non-additive effect is possible in GWAS using a large dataset.

NLL order contributions for exclusive processes in jet-calculus scheme

International Nuclear Information System (INIS)

Tanaka, Hidekazu

2011-01-01

We investigate the next-to-leading logarithmic (NLL) order contributions of the quantum chromodynamics (QCD) for exclusive processes evaluated by Monte Carlo methods. Ambiguities of the Monte Carlo calculation based on the leading-logarithmic (LL) order approximations are pointed out. To remove these ambiguities, we take into account the NLL order terms. In a model presented in this paper, interference contributions due to the NLL order terms are included for the generation of the transverse momenta in initial-state parton radiations. Furthermore, a kinematical constraint due to parton radiation, which is also a part of the NLL order contributions, is taken into account. This method guarantees a proper phase space boundary for hard scattering cross sections as well as parton radiations. As an example, cross sections for lepton pair productions mediated by a virtual photon in hadron-hadron collisions are calculated, using the jet-calculus scheme for flavor nonsinglet quarks. (author)

Comments on the Brazilian Proposal and contributions to global temperature increase with different climate responses--CO2 emissions due to fossil fuels, CO2 emissions due to land use change

International Nuclear Information System (INIS)

Rosa, L.P.; Ribeiro, S.K.; Muylaert, M.S.; Pires de Campos, Christiano

2004-01-01

This paper addresses the question of how to take into account the anthropogenic contribution to the increase of global temperature, instead of being restricted to the Carbon emissions adopted in the Kyoto Protocol on responsibility sharing. It is shown the sensibility of the results to the variation of the parameters from different authors used for simulating the climate response based in the so-called Brazilian Proposal (BP). It is also discussed the methodological and scientific aspects of the BP being discussed by an expert group coordinated by SBSTA/UNFCCC and results of energy sector and land use change contributions by groups of countries

Contribution to the study of remedy solutions to uranium(molybdenum)/aluminium interactions: role of silicon addition to aluminium, study of coupled effects

International Nuclear Information System (INIS)

Allenou, J.

2011-01-01

In the project development and qualification program of a nuclear fuel with Low Enriched Uranium for Materials Testing Reactors, the dispersed U(Mo)/Al fuel is being developed due to its excellent stability during irradiation. However, in pile experiments showed that depending on the irradiation conditions (e.g. high burnup or high heat flux), an extensive interaction occurs between the fissile element U(Mo) and the Al based matrix resulting in swelling, which could eventually lead to a fuel plate failure. Among the ways to improve the behavior of the dispersed U(Mo) fuel, the solution now seen as the reference remedy by the entire scientific community is the addition of silicon into the aluminum matrix. In order to provide some understanding and optimizing the solution 'Si additions into Al matrix' under neutron irradiation, an out of pile study is performed on (i) the interaction mechanisms involved in the U(Mo)/Al (Si) system and (ii) the impact of the Si additions into the Al matrix on alternative solutions to the U(Mo)/Al interactions, namely the modification of the γ-U(Mo) fissile compound by adding a third element and/or modifying the interface between the γ-U(Mo) fissile compound and the matrix. This document provides a mechanistic description of the U(7Mo)/Al(Si) interaction for a range of Si content in Al between 2 and 10 wt.%, based on the multi-scale characterization of diffusion couples. The location of the Mo and its role in the reaction mechanisms are demonstrated. The influence of elements X = Y, Cu, Zr, Ti, Cr, on the U (Mo)/Al and U (Mo)/Al (Si) interactions mechanisms was then studied. It is shown that adding a third element to the U(Mo) alloy acts on the second order on diffusion kinetics and (micro)structure of the interaction layer compared to the addition of Si into Al. Finally, an alumina coating which shows a potential interest to improve the performance of the fuel has been developed. (author) [fr

Additive Contributions of Childhood Adversity and Recent Stressors to Inflammation at Midlife: Findings from the MIDUS Study

Science.gov (United States)

Hostinar, Camelia E.; Lachman, Margie E.; Mroczek, Daniel K.; Seeman, Teresa E.; Miller, Gregory E.

2015-01-01

We examined the joint contributions of self-reported adverse childhood experiences (ACEs) and recent life events (RLEs) to inflammation at midlife, by testing 3 competing theoretical models: stress generation, stress accumulation, and early life stress sensitization. We aimed to identify potential mediators between adversity and inflammation.…

Evaluation of inbreeding in laying hens by applying optimum genetic contribution and gene flow theory.

Science.gov (United States)

König, S; Tsehay, F; Sitzenstock, F; von Borstel, U U; Schmutz, M; Preisinger, R; Simianer, H

2010-04-01

Due to consistent increases of inbreeding of on average 0.95% per generation in layer populations, selection tools should consider both genetic gain and genetic relationships in the long term. The optimum genetic contribution theory using official estimated breeding values for egg production was applied for 3 different lines of a layer breeding program to find the optimal allocations of hens and sires. Constraints in different scenarios encompassed restrictions related to additive genetic relationships, the increase of inbreeding, the number of selected sires and hens, and the number of selected offspring per mating. All these constraints enabled higher genetic gain up to 10.9% at the same level of additive genetic relationships or in lower relationships at the same gain when compared with conventional selection schemes ignoring relationships. Increases of inbreeding and genetic gain were associated with the number of selected sires. For the lowest level of the allowed average relationship at 10%, the optimal number of sires was 70 and the estimated breeding value for egg production of the selected group was 127.9. At the highest relationship constraint (16%), the optimal number of sires decreased to 15, and the average genetic value increased to 139.7. Contributions from selected sires and hens were used to develop specific mating plans to minimize inbreeding in the following generation by applying a simulated annealing algorithm. The additional reduction of average additive genetic relationships for matings was up to 44.9%. An innovative deterministic approach to estimate kinship coefficients between and within defined selection groups based on gene flow theory was applied to compare increases of inbreeding from random matings with layer populations undergoing selection. Large differences in rates of inbreeding were found, and they underline the necessity to establish selection tools controlling long-term relationships. Furthermore, it was suggested to use

Cyp26 Enzymes Facilitate Second Heart Field Progenitor Addition and Maintenance of Ventricular Integrity.

Directory of Open Access Journals (Sweden)

Ariel B Rydeen

2016-11-01

Full Text Available Although retinoic acid (RA teratogenicity has been investigated for decades, the mechanisms underlying RA-induced outflow tract (OFT malformations are not understood. Here, we show zebrafish embryos deficient for Cyp26a1 and Cyp26c1 enzymes, which promote RA degradation, have OFT defects resulting from two mechanisms: first, a failure of second heart field (SHF progenitors to join the OFT, instead contributing to the pharyngeal arch arteries (PAAs, and second, a loss of first heart field (FHF ventricular cardiomyocytes due to disrupted cell polarity and extrusion from the heart tube. Molecularly, excess RA signaling negatively regulates fibroblast growth factor 8a (fgf8a expression and positively regulates matrix metalloproteinase 9 (mmp9 expression. Although restoring Fibroblast growth factor (FGF signaling can partially rescue SHF addition in Cyp26 deficient embryos, attenuating matrix metalloproteinase (MMP function can rescue both ventricular SHF addition and FHF integrity. These novel findings indicate a primary effect of RA-induced OFT defects is disruption of the extracellular environment, which compromises both SHF recruitment and FHF ventricular integrity.

Anatomically ordered tapping interferes more with one-digit addition than two-digit addition: a dual-task fMRI study.

Science.gov (United States)

Soylu, Firat; Newman, Sharlene D

2016-02-01

Fingers are used as canonical representations for numbers across cultures. In previous imaging studies, it was shown that arithmetic processing activates neural resources that are known to participate in finger movements. Additionally, in one dual-task study, it was shown that anatomically ordered finger tapping disrupts addition and subtraction more than multiplication, possibly due to a long-lasting effect of early finger counting experiences on the neural correlates and organization of addition and subtraction processes. How arithmetic task difficulty and tapping complexity affect the concurrent performance is still unclear. If early finger counting experiences have bearing on the neural correlates of arithmetic in adults, then one would expect anatomically and non-anatomically ordered tapping to have different interference effects, given that finger counting is usually anatomically ordered. To unravel these issues, we studied how (1) arithmetic task difficulty and (2) the complexity of the finger tapping sequence (anatomical vs. non-anatomical ordering) affect concurrent performance and use of key neural circuits using a mixed block/event-related dual-task fMRI design with adult participants. The results suggest that complexity of the tapping sequence modulates interference on addition, and that one-digit addition (fact retrieval), compared to two-digit addition (calculation), is more affected from anatomically ordered tapping. The region-of-interest analysis showed higher left angular gyrus BOLD response for one-digit compared to two-digit addition, and in no-tapping conditions than dual tapping conditions. The results support a specific association between addition fact retrieval and anatomically ordered finger movements in adults, possibly due to finger counting strategies that deploy anatomically ordered finger movements early in the development.

Development of strength-hardness relationships in additively manufactured titanium alloys

Energy Technology Data Exchange (ETDEWEB)

Keist, Jayme S., E-mail: keist@psu.edu; Palmer, Todd A., E-mail: tap103@psu.edu

2017-05-02

A major concern for additively manufactured (AM) Ti-6Al-4V components is how AM processing parameters and post-process heat treatments impact the resulting mechanical behavior. The applicability of using microhardness measurements as a predictive tool for yield and tensile strengths of AM Ti-6Al-4V would provide a rapid and useful screening mechanism for ensuring that properties meet requirements in complex geometries. However, microhardness measurements on Ti-6Al-4V exhibit high levels of data variability due to the orientational impact of the α phase. In order to overcome this variability in hardness measurements, a methodology for aggregating microhardness data in individual builds has been developed and validated. By compiling mean microhardness values from various AM components produced by electron beam based directed energy deposition (DED), laser based DED, and laser based powder bed fusion (PBF) processes in the as-deposited and post-process heat treated conditions, strong linear correlations between strength and hardness can be developed in AM materials having a lamellar α+β microstructure. With the addition of strain hardening and α phase orientation contributions to the mean microhardness measurement, the strength-hardness correlations of AM Ti-6Al-4V followed empirically derived models, opening the possibility of using these models to predict strengths from AM components regardless of the AM process or post-process state.

Nurse middle managers contributions to patient-centred care : A 'managerial work' analysis

NARCIS (Netherlands)

Lalleman, Pcb; Smid, G. A C; Dikken, Jeroen; Lagerwey, M. D.; Schuurmans, M J

2017-01-01

Nurse middle managers are in an ideal position to facilitate patient-centred care. However, their contribution is underexposed in literature due to difficulties to articulate this in practice. This paper explores how nurse middle managers contribute to patient-centred care in hospitals. A

New physics contribution to neutral trilinear gauge boson couplings

International Nuclear Information System (INIS)

Dutta, Sukanta; Mamta; Goyal, Ashok

2009-01-01

We study the one-loop new physics effects to the CP even triple neutral gauge boson vertices γ * γZ, γ * ZZ, Z * Zγ and Z * ZZ in the context of Little Higgs models. We compute the contribution of the additional fermions in Little Higgs models in the framework of direct product groups where [SU(2) x U(1)] 2 gauge symmetry is embedded in SU(5) global symmetry and also in the framework of the simple group where SU(N) x U(1) gauge symmetry breaks down to SU(2) L x U(1). We calculate the contribution of the fermions to these couplings when T parity is invoked. In addition, we re-examine the MSSM contribution at the chosen point of SPS1a ' and compare with the SM and Little Higgs models. (orig.)

Contribution Index Based on Green Building Certification Systems

Directory of Open Access Journals (Sweden)

Yuting Sun

2015-05-01

Full Text Available Green Building Certification Systems (GBCS are carried out in many countries due to the rising awareness of the importance of sustainability in the building industry. The intention should have motivated participants to construct and operate buildings sustainably, however, there is not yet a method developed to investigate the motivation of the participants. Based on the GBCS, this paper proposes the contribution index as a standard global method to analyze the performance of participants in the green building industry. Three contribution indices, namely Frequency Contribution Index (FCI, Intensity Contribution Index (ICI and Comprehensive Contribution Index (CCI that concern each different category of participant, have been formulated. Three further analyses based on the index were undertaken to investigate some features of the industry. A case study of Singapore was conducted to show how the contribution index could be used to extract industry patterns and trends and assess the participants’ performance in the green building industry. Interviews with experts provide some suggested applications and support for the findings.

The assessment of damages due to climate change in a situation of uncertainty: the contribution of adaptation cost modelling

International Nuclear Information System (INIS)

Dumas, P.

2006-01-01

The aim of this research is to introduce new elements for the assessment of damages due to climate changes within the frame of compact models aiding the decision. Two types of methodologies are used: sequential optimisation stochastic models and simulation stochastic models using optimal assessment methods. The author first defines the damages, characterizes their different categories, and reviews the existing assessments. Notably, he makes the distinction between damages due to climate change and damages due to its rate. Then, he presents the different models used in this study, the numerical solutions, and gives a rough estimate of the importance of the considered phenomena. By introducing a new category of capital in an optimal growth model, he tries to establish a framework allowing the representation of adaptation and of its costs. He introduces inertia in macro-economical evolutions, climatic variability, detection of climate change and damages due to climate hazards

Electrolyte Additives for Phosphoric Acid Fuel Cells

DEFF Research Database (Denmark)

Gang, Xiao; Hjuler, H.A.; Olsen, C.A.

1993-01-01

, as a fuel-cell performance with the modified electrolytes. Specific conductivity measurements of some of the modified phosphoric acid electrolytes are reported. At a given temperature, the conductivity of the C4F9SO3K-modified electrolyte decreases with an increasing amount of the additive; the conductivity...... of the remains at the same value as the conductivity of the pure phosphoric acid. At a given composition, the conductivity of any modified electrolyte increases with temperature. We conclude that the improved cell performance for modified electrolytes is not due to any increase in conductivity.......Electrochemical characteristics of a series of modified phosphoric acid electrolytes containing fluorinated car on compounds and silicone fluids as additives are presented. When used in phosphoric acid fuel cells, the modified electrolytes improve the performance due to the enhanced oxygen...

Comments on the Brazilian Proposal and contributions to global temperature increase with different climate responses - CO2 emissions due to fossil fuels, CO2 emissions due to land use change

International Nuclear Information System (INIS)

Rosa, L.P.; Ribeiro, S.K.; Muylaert, M.S.; Campos, C.P.

2004-01-01

This paper addresses the question of how to take into account the anthropogenic contribution to the increase of global temperature, instead of being restricted to the carbon emissions adopted in the Kyoto Protocol on responsibility sharing. It is shown the sensibility of the results to the variation of the parameters from different authors used for simulating the climate response based in the so-called Brazilian Proposal (BP). It is also discussed the methodological and scientific aspects of the BP being discussed by an expert group coordinated by SBSTA/UNFCCC and results of energy sector and land use change contributions by groups of countries. (author)

Additionality of global benefits and financial additionality in the context of the AIJ negotiations

Energy Technology Data Exchange (ETDEWEB)

Puhl, I.

1996-12-31

The Conference of the Party at their first meeting (COP1) took a decision regarding criteria for joint implementation as indicated in Art. 4.2 (a) of the FCCC which established a pilot phase for activities implemented jointly (AIJ) under the pilot phase. Besides some more technical issues this decision specified that such measures should bring about real, measurable and long-term environmental benefits related to the mitigation of climate change that would not have occurred in the absence of such activities. It also established that the financing of AIJ shall be additional to the financial obligations of developed country parties. These two requirements are called the additionality criteria for AIJ. The first refers to the realness of GHG emission abatement (which means reduction compared to a baseline) whereas the second describes that funds earmarked for AIJ have no other objective (i.e. profit making, export promotion) but to reduce GHG emissions to avoid the free-riding of investors and subsequently developed country parties. The reporting framework as well as the reporting requirements under national programs do not specify further the two types of additionality and even though research focuses on issues like baseline determination there has been no attempt so far to identify approaches which contribute towards defining strict and practicable methods and guidelines to frame additionality criteria. The first FCCC assessment of pilot project reporting revealed that in the reporting of activities, emissions additionality often remained unclear, especially in cases where AIJ was only a portion of an existing or already planned project, and that there is a point about how to account for financial additionality. It subsequently proposed to develop a uniform approach to baseline determination and the assessment of emission (reduction) additionality and financial additionality.

Additive Technology: Update on Current Materials and Applications in Dentistry.

Science.gov (United States)

Barazanchi, Abdullah; Li, Kai Chun; Al-Amleh, Basil; Lyons, Karl; Waddell, J Neil

2017-02-01

Additive manufacturing or 3D printing is becoming an alternative to subtractive manufacturing or milling in the area of computer-aided manufacturing. Research on material for use in additive manufacturing is ongoing, and a wide variety of materials are being used or developed for use in dentistry. Some materials, however, such as cobalt chromium, still lack sufficient research to allow definite conclusions about the suitability of their use in clinical dental practice. Despite this, due to the wide variety of machines that use additive manufacturing, there is much more flexibility in the build material and geometry when building structures compared with subtractive manufacturing. Overall additive manufacturing produces little material waste and is energy efficient when compared to subtractive manufacturing, due to passivity and the additive layering nature of the build process. Such features make the technique suitable to be used with fabricating structures out of hard to handle materials such as cobalt chromium. The main limitations of this technology include the appearance of steps due to layering of material and difficulty in fabricating certain material generally used in dentistry for use in 3D printing such as ceramics. The current pace of technological development, however, promises exciting possibilities. © 2016 by the American College of Prosthodontists.

The anomalous contribution to polarized leptoproduction

International Nuclear Information System (INIS)

Altarelli, G.; Ross, G.

1988-01-01

We show that, due to the anomaly, the gluon contribution to the first moment of the polarized proton structure function, as measured in deep inelastic scattering, is not suppressed by a power of the strong coupling evaluated at a large scale. As a result, the EMC result for the first moment of polarized proton electroproduction is consistent with a large quark spin component. (orig.)

Offline analysis of context contribution to ERP-based typing BCI performance

Science.gov (United States)

Orhan, Umut; Erdogmus, Deniz; Roark, Brian; Oken, Barry; Fried-Oken, Melanie

2013-12-01

Objective. We aim to increase the symbol rate of electroencephalography (EEG) based brain-computer interface (BCI) typing systems by utilizing context information. Approach. Event related potentials (ERP) corresponding to a stimulus in EEG can be used to detect the intended target of a person for BCI. This paradigm is widely utilized to build letter-by-letter BCI typing systems. Nevertheless currently available BCI typing systems still require improvement due to low typing speeds. This is mainly due to the reliance on multiple repetitions before making a decision to achieve higher typing accuracy. Another possible approach to increase the speed of typing while not significantly reducing the accuracy of typing is to use additional context information. In this paper, we study the effect of using a language model (LM) as additional evidence for intent detection. Bayesian fusion of an n-gram symbol model with EEG features is proposed, and a specifically regularized discriminant analysis ERP discriminant is used to obtain EEG-based features. The target detection accuracies are rigorously evaluated for varying LM orders, as well as the number of ERP-inducing repetitions. Main results. The results demonstrate that the LMs contribute significantly to letter classification accuracy. For instance, we find that a single-trial ERP detection supported by a 4-gram LM may achieve the same performance as using 3-trial ERP classification for the non-initial letters of words. Significance. Overall, the fusion of evidence from EEG and LMs yields a significant opportunity to increase the symbol rate of a BCI typing system.

New physics contribution to neutral trilinear gauge boson couplings

Energy Technology Data Exchange (ETDEWEB)

Dutta, Sukanta; Mamta [University of Delhi, SGTB Khalsa College, Delhi (India); Goyal, Ashok [University of Delhi, Department of Physics and Astrophysics, Delhi (India)

2009-09-15

We study the one-loop new physics effects to the CP even triple neutral gauge boson vertices {gamma}{sup *}{gamma}Z, {gamma}{sup *}ZZ, Z{sup *}Z{gamma} and Z{sup *}ZZ in the context of Little Higgs models. We compute the contribution of the additional fermions in Little Higgs models in the framework of direct product groups where [SU(2) x U(1)]{sup 2} gauge symmetry is embedded in SU(5) global symmetry and also in the framework of the simple group where SU(N) x U(1) gauge symmetry breaks down to SU(2){sub L} x U(1). We calculate the contribution of the fermions to these couplings when T parity is invoked. In addition, we re-examine the MSSM contribution at the chosen point of SPS1a ' and compare with the SM and Little Higgs models. (orig.)

Chest Traumas due to Bicycle accident in Childhood

Directory of Open Access Journals (Sweden)

Ufuk Cobanoglu

2011-09-01

Full Text Available Aim:Childhood injuries are the leading cause of death in children and result in significant healthcare utilization. Trauma is the second most common cause of mortality in children aged 1-4 years and leading cause of death in children older than 4 years. Thoracic injury is the second most leading cause of death in traumatized children. Multisystemic injury is found in more than 50% of children with thoracic injuries most of which are secondary to blunt traumas. We planned this study to evaluate thorax trauma cases secondary to bicycle driving in childhood and to draw attention to the importance of the regulation of traffic rules, the education of bicycle drivers.Material and Methods:  A retrospective evaluation was performed in 17 pediatric patients admitted to the Department of Thoracic Surgery during 2006-2010 with a diagnosis of chest trauma due to bicycle driving. For every patient, a pediatric trauma score (PTS was calculated. Descriptive statistics were performed for PTS. Results; Eleven (64.70% cases were injured due to the tricycle accidents and six cases 6 (35.29% were injured due to the two-wheeled bicycle accidents. The most frequent thoracic pathologies included pulmonary contusion (41.2% and chest wall contusion (29.41%. Extrathoracic injuries were seen in 35.29%, the extremities (17.64% and abdomino pelvic (11.76% being the most commonly involved. Treatment consisted of symptomatic treatment in 12 patients (70.58%, tube thoracostomy in 2 patients (11.76%, and thoracotomy in 1 patient (5.9%. The morbidity was seen in 3 patients (17.64%. The mortality rate was 5.9% (n:1. The mean PTS of the cases who had additional system injuries were significantly worse than the cases who had isolated chest traumas Conclusions: The pediatric thorax has a greater cartilage content and incomplete ossification of the ribs. Due to the pliability of the pediatric rib cage and mediastinal mobility, significant intrathoracic injury may exist in the

Minimum Additive Waste Stabilization (MAWS)

International Nuclear Information System (INIS)

1994-02-01

In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes

The contributions of community learning centres (CLCs) to personal and community development in Myanmar

Science.gov (United States)

Le, Ai Tam Pham

2018-05-01

Community learning centres (CLCs) have been widely established in the Asia-Pacific region as locally managed institutions that offer non-formal educational opportunities and community development activities. Myanmar officially has more than 3,000 centres, which is one of the highest numbers in the region. This article examines the operation of CLCs and their contributions to personal and community development in Padaung, Myanmar. The author's research is based on six weeks of fieldwork in Myanmar for data collection including semi-structured interviews, focus group discussions and informal conversations. Her findings suggest that CLCs can contribute to the improvement of both individuals' quality of life and communities' social capital, which facilitates mutually beneficial collective action. The findings also support the conclusion that CLCs can provide additional educational opportunities beyond the formal system, especially for adults and members of rural communities, e.g. farmers. However, due to constraints in terms of budget, implementing capacity and socio-economic factors, the outreach of CLC activities is still somewhat limited and has yet to reach its full potential.

Case report: failure under azithromycin treatment in a case of bacteremia due to Salmonella enterica Paratyphi A.

Science.gov (United States)

Kobayashi, Tetsuro; Hayakawa, Kayoko; Mawatari, Momoko; Mezaki, Kazuhisa; Takeshita, Nozomi; Kutsuna, Satoshi; Fujiya, Yoshihiro; Kanagawa, Shuzo; Ohmagari, Norio; Kato, Yasuyuki; Morita, Masatomo

2014-07-20

Limited information is available regarding the clinical efficacy of azithromycin for the treatment of enteric fever due to fluoroquinolone-resistant Salmonella Typhi and Salmonella Paratyphi among travelers returning to their home countries. We report a case of a 52-year-old Japanese man who returned from India, who developed a fever of 39°C with no accompanying symptoms 10 days after returning to Japan from a 1-month business trip to Delhi, India. His blood culture results were positive for Salmonella Paratyphi A. He was treated with 14 days of ceftriaxone, after which he remained afebrile for 18 days before his body temperature again rose to 39°C with no apparent symptoms. He was then empirically given 500 mg of azithromycin, but experienced clinical and microbiological failure of azithromycin treatment for enteric fever due to Salmonella Paratyphi A. However, the minimum inhibitory concentration (MIC) of azithromycin was not elevated (8 mg/L). He was again given ceftriaxone for 14 days with no signs of recurrence during the follow-up. There are limited data available for the treatment of enteric fever using azithromycin in travelers from developed countries who are not immune to the disease, and thus, careful follow-up is necessary. In our case, the low azithromycin dose might have contributed the treatment failure. Additional clinical data are needed to determine the rate of success, MIC, and contributing factors for success and/or failure of azithromycin treatment for both Salmonella Typhi and Salmonella Paratyphi infections.

LITTER PRODUCTION AND NUTRIENT ADDITION IN ATLANTIC FOREST AREAS IN SANTA MARIA DE JETIBÁ, ES

Directory of Open Access Journals (Sweden)

Geângelo Petene Calvi

2009-09-01

Full Text Available This study was accomplished on Espíndula Farm, Santa Maria de Jetibá (ES, with the objective of evaluating the litter and nutrients deposition in areas with different succession stadiums. Two areas were selected with different vegetable coverings, defined as: (SF Secondary Forest, with about 25 ha of area, corresponding to an old area of cassava cultivation with about 50 years in process of ecological succession and where today there is a secondary forest and an Old Secondary Forest (OSF corresponding to a forest area that has just been submitted to a selective wood extraction for use of the farm itself. In each one of vegetal areas, approximately 0.1 ha was delimited and in these ten conical collectors were randomized distributed. The litter collections were accomplished monthly from November 2003 to October 2005. After drying, the material was stratified and the total contributed and the contribution of the different fractions, and the nutritious addition were evaluated. It was not verified significant differences among the total of litter deposited among the areas, being the highest production values observed in the summer, 5.70 Mg ha-1 (SF and 5.73 Mg ha-1(OSF, possibly due to the winds and rain mechanical action. The fraction of higher contribution was the foliar, corresponding to 74.62% for the SF area and 69.46% for the OSF area

The effect of activated carbon addition on membrane bioreactor processes for wastewater treatment and reclamation - A critical review.

Science.gov (United States)

Skouteris, George; Saroj, Devendra; Melidis, Paraschos; Hai, Faisal I; Ouki, Sabèha

2015-06-01

This review concentrates on the effect of activated carbon (AC) addition to membrane bioreactors (MBRs) treating wastewaters. Use of AC-assisted MBRs combines adsorption, biodegradation and membrane filtration. This can lead to advanced removal of recalcitrant pollutants and mitigation of membrane fouling. The relative contribution of adsorption and biodegradation to overall removal achieved by an AC-assisted MBR process can vary, and "biological AC" may not fully develop due to competition of target pollutants with bulk organics in wastewater. Thus periodic replenishment of spent AC is necessary. Sludge retention time (SRT) governs the frequency of spent AC withdrawal and addition of fresh AC, and is an important parameter that significantly influences the performance of AC-assisted MBRs. Of utmost importance is AC dosage because AC overdose may aggravate membrane fouling, increase sludge viscosity, impair mass transfer and reduce sludge dewaterability. Copyright © 2015 Elsevier Ltd. All rights reserved.

Foreign and Domestic Contributions to Springtime Ozone Pollution over China

Science.gov (United States)

Ni, R.; Lin, J.; Yan, Y.; Lin, W.; Chen, H.

2017-12-01

Ozone is a critical air pollutant that damages human health and vegetation. Previous studies for the United States and Europe have shown large influences of foreign emissions on domestic ozone levels, whereas the relative contributions of foreign versus domestic emissions are much less clear for China. Here, we use a global-regional two-way coupled model system based on GEOS-Chem to quantify the contributions to springtime ozone over China from anthropogenic emissions in major source regions across the globe. Our results indicate considerable influences of foreign anthropogenic pollution on China's ozone pollution. Together, foreign anthropogenic emissions enhance springtime surface ozone over China by 3 12 ppb. Of all ozone over China produced by global anthropogenic emissions, foreign emissions contribute 40% near the surface, and the contribution increases with altitude until a value of 80% in the upper troposphere. Impact from Japan and Korea is 1 2 ppb over east coastal regions, and negligible in inland. Anthropogenic emissions of South and South-East Asia increase ozone over Tibet and the Yunnan-Guizhou Plateau by up to 5 ppb, and their contribution increases with height due to strong vertical transport. Pollution from North America and Europe mainly accompanies strong westerly winds and frequent cyclonic activities that are favorable to long-range transport. European anthropogenic pollution enhances surface ozone by 1 3 ppb over West and North China. Despite a much longer transport distance, the contribution from North America is greater than European contribution due to the nearly doubled amount of anthropogenic NMVOC emissions. The high percentage contribution of foreign anthropogenic emissions to China's ozone pollution can be partly explained by excessive domestic NOx emissions that suppress ozone production efficiency and even destroy ozone. Our study is relevant to Chinese ozone pollution control and global environmental protection collaboration.

Source contribution analysis of surface particulate polycyclic aromatic hydrocarbon concentrations in northeastern Asia by source–receptor relationships

International Nuclear Information System (INIS)

Inomata, Yayoi; Kajino, Mizuo; Sato, Keiichi; Ohara, Toshimasa; Kurokawa, Jun-ichi; Ueda, Hiromasa; Tang, Ning; Hayakawa, Kazuichi; Ohizumi, Tsuyoshi; Akimoto, Hajime

2013-01-01

We analyzed the source–receptor relationships for particulate polycyclic aromatic hydrocarbon (PAH) concentrations in northeastern Asia using an aerosol chemical transport model. The model successfully simulated the observed concentrations. In Beijing (China) benzo[a]pyren (BaP) concentrations are due to emissions from its own domain. In Noto, Oki and Tsushima (Japan), transboundary transport from northern China (>40°N, 40–60%) and central China (30–40°N, 10–40%) largely influences BaP concentrations from winter to spring, whereas the relative contribution from central China is dominant (90%) in Hedo. In the summer, the contribution from Japanese domestic sources increases (40–80%) at the 4 sites. Contributions from Japan and Russia are additional source of BaP over the northwestern Pacific Ocean in summer. The contribution rates for the concentrations from each domain are different among PAH species depending on their particulate phase oxidation rates. Reaction with O 3 on particulate surfaces may be an important component of the PAH oxidation processes. -- Highlights: •Source–receptor analysis was conducted for investigating PAHs in northeast Asia. •In winter, transboundary transport from China is large contribution in leeward. •Relative contribution from Korea, Japan, and eastern Russia is increased in summer. •This seasonal variation is strongly controlled by the meteorological conditions. •The transport distance is different among PAH species. -- Transboundary transport of PAHs in northeast Asia was investigated by source–receptor analysis

Large contribution to the neutron electric dipole moment from a dimension-six four-quark operator

International Nuclear Information System (INIS)

He, X.; McKellar, B.

1993-01-01

In this paper we study the contribution of a dimension-six four-quark operator to the neutron electric dipole moment. We find that this contribution dominates over the one-loop contributions due to W L- WR mixing by at least one order of magnitude in left-right-symmetric models, and in diquark scalar models this contribution is two orders of magnitude larger than other contributions

Force-velocity properties' contribution to bilateral deficit during ballistic push-off.

Science.gov (United States)

Samozino, Pierre; Rejc, Enrico; di Prampero, Pietro Enrico; Belli, Alain; Morin, Jean-Benoît

2014-01-01

The objective of this study is to quantify the contribution of the force-velocity (F-v) properties to bilateral force deficit (BLD) in ballistic lower limb push-off and to relate it to individual F-v mechanical properties of the lower limbs. The F-v relation was individually assessed from mechanical measurements for 14 subjects during maximal ballistic lower limb push-offs; its contribution to BLD was then investigated using a theoretical macroscopic approach, considering both the mechanical constraints of movement dynamics and the maximal external capabilities of the lower limb neuromuscular system. During ballistic lower limb push-off, the maximum force each lower limb can produce was lower during bilateral than unilateral actions, thus leading to a BLD of 36.7% ± 5.7%. The decrease in force due to the F-v mechanical properties amounted to 19.9% ± 3.6% of the force developed during BL push-offs, which represents a nonneural contribution to BLD of 43.5% ± 9.1%. This contribution to BLD that cannot be attributed to changes in neural features was negatively correlated to the maximum unloaded extension velocity of the lower limb (r = -0.977, P push-off, BLD is due to both neural alterations and F-v mechanical properties, the latter being associated with the change in movement velocity between bilateral and unilateral actions. The level of the contribution of the F-v properties depends on the individual F-v mechanical profile of the entire lower limb neuromuscular system: the more the F-v profile is oriented toward velocity capabilities, the lower the loss of force from unilateral to bilateral push-offs due to changes in movement velocity.

The Optimization of Calcareous Fly Ash-Added Cement Containing Grinding Aids and Strength-Improving Additives

Directory of Open Access Journals (Sweden)

Gökhan Kaplan

2018-01-01

Full Text Available This is an experimental study which explores the physical, mechanical, and economic factors involved in the production of type CEM II A-B/W cement. In this context, 4 cement additives were used in two different dosages (200 and 800 g/t. Class C fly ash was used for composite cement production at ratios of 5%, 20%, and 35%. It was shown that Blaine fineness increases with the increasing fly ash content. The use of fly ash at ratios of 5% and 20% was not found to have any unfavorable effects on the compressive strength at the early days. It is found that the use of additive for improving the early-age strength is preferable when fly ash is used. It is possible to produce Class 52.5 N cement using additives to improve early strength and 20% fly ash. Loss in strength was observed in cement mortars produced using glycol-based grinding aid. Increasing the dosage of chemical additive also led to loss in strength due to nonhomogeneous distribution of hydration products. As a result, grinding fly ash with clinker and the use of cement chemicals contribute to the cement sector in terms of sustainability. It is possible to produce cements with improved mechanical properties especially with the use of 20% fly ash.

Does the kappa opioid receptor system contribute to pain aversion?

Directory of Open Access Journals (Sweden)

Catherine M Cahill

2014-11-01

Full Text Available The kappa opioid receptor (KOR and the endogenous peptide-ligand dynorphin have received significant attention due the involvement in mediating a variety of behavioral and neurophysiological responses, including opposing the rewarding properties of drugs of abuse including opioids. Accumulating evidence indicates this system is involved in regulating states of motivation and emotion. Acute activation of the KOR produces an increase in motivational behavior to escape a threat, however, KOR activation associated with chronic stress leads to the expression of symptoms indicative of mood disorders. It is well accepted that KOR can produce analgesia and is engaged in chronic pain states including neuropathic pain. Spinal studies have revealed KOR-induced analgesia in reversing pain hypersensitivities associated with peripheral nerve injury. While systemic administration of KOR agonists attenuates nociceptive sensory transmission, this effect appears to be a stress-induced effect as anxiolytic agents, including delta opioid receptor agonists, mitigate KOR agonist-induced analgesia. Additionally, while the role of KOR and dynorphin in driving the dysphoric and aversive components of stress and drug withdrawal has been well characterized, how this system mediates the negative emotional states associated with chronic pain is relatively unexplored. This review provides evidence that dynorphin and the KOR system contribute to the negative affective component of pain and that this receptor system likely contributes to the high comorbidity of mood disorders associated with chronic neuropathic pain.

Electrical resistivity due to electron-phonon scattering in thin gadolinium films

International Nuclear Information System (INIS)

Urbaniak-Kucharczyk, A.

1988-01-01

The contribution to the electrical resistivity due to the electron-phonon scattering for the special case of h.c.p. structure is derived. The numerical results obtained for the case of polycrystalline gadolinum films show the resistivity dependence on the film thickness and the surface properties. (author)

Extreme methane emissions from a Swiss hydropower reservoir: contribution from bubbling sediments.

Science.gov (United States)

Delsontro, Tonya; McGinnis, Daniel F; Sobek, Sebastian; Ostrovsky, Ilia; Wehrli, Bernhard

2010-04-01

Methane emission pathways and their importance were quantified during a yearlong survey of a temperate hydropower reservoir. Measurements using gas traps indicated very high ebullition rates, but due to the stochastic nature of ebullition a mass balance approach was crucial to deduce system-wide methane sources and losses. Methane diffusion from the sediment was generally low and seasonally stable and did not account for the high concentration of dissolved methane measured in the reservoir discharge. A strong positive correlation between water temperature and the observed dissolved methane concentration enabled us to quantify the dissolved methane addition from bubble dissolution using a system-wide mass balance. Finally, knowing the contribution due to bubble dissolution, we used a bubble model to estimate bubble emission directly to the atmosphere. Our results indicated that the total methane emission from Lake Wohlen was on average >150 mg CH(4) m(-2) d(-1), which is the highest ever documented for a midlatitude reservoir. The substantial temperature-dependent methane emissions discovered in this 90-year-old reservoir indicate that temperate water bodies can be an important but overlooked methane source.

26 CFR 1.722-1 - Basis of contributing partner's interest.

Science.gov (United States)

2010-04-01

... partnership capital results in taxable income to a partner, such income shall constitute an addition to the... money under section 752(b), is treated as capital gain from the sale or exchange or a partnership... contributing partner's interest. The basis to a partner of a partnership interest acquired by a contribution of...

Thermal shock behaviour of mullite-bonded porous silicon carbide ceramics with yttria addition

International Nuclear Information System (INIS)

Ding Shuqiang; Zeng Yuping; Jiang Dongliang

2007-01-01

Thermal shock resistance of mullite (3Al 2 O 3 · 2SiO 2 )-bonded porous silicon carbide (SiC) ceramics with 3.0 wt% yttria (Y 2 O 3 ) addition was evaluated by a water-quenching technique. The thermal shock damage was investigated as a function of the quenching temperature, quenching cycles and specimen thickness. The residual flexural strength of the quenched specimens decreases with increasing quenching temperature and specimen thickness due to the larger thermal stress caused by thermal shock. However, quenching cycles at the temperature difference of 1200 deg. C have no effect on the residual strength since the same thermal stress was produced in repeated thermal shock processes. The good thermal shock damage resistance of the specimens is contributed mainly by the low strength and moderate elastic modulus. Moreover, the pores prevent the continuous propagation of cracks and alleviate further damage

The contribution to future flood risk in the Severn Estuary from extreme sea level rise due to ice sheet mass loss

Science.gov (United States)

Quinn, N.; Bates, P. D.; Siddall, M.

2013-12-01

The rate at which sea levels will rise in the coming century is of great interest to decision makers tasked with developing mitigation policies to cope with the risk of coastal inundation. Accurate estimates of future sea levels are vital in the provision of effective policy. Recent reports from UK Climate Impacts Programme (UKCIP) suggest that mean sea levels in the UK may rise by as much as 80 cm by 2100; however, a great deal of uncertainty surrounds model predictions, particularly the contribution from ice sheets responding to climatic warming. For this reason, the application of semi-empirical modelling approaches for sea level rise predictions has increased of late, the results from which suggest that the rate of sea level rise may be greater than previously thought, exceeding 1 m by 2100. Furthermore, studies in the Red Sea indicate that rapid sea level rise beyond 1m per century has occurred in the past. In light of such research, the latest UKCIP assessment has included a H++ scenario for sea level rise in the UK of up to 1.9 m which is defined as improbable but, crucially, physically plausible. The significance of such low-probability sea level rise scenarios upon the estimation of future flood risk is assessed using the Somerset levels (UK) as a case study. A simple asymmetric probability distribution is constructed to include sea level rise scenarios of up to 1.9 m by 2100 which are added to a current 1:200 year event water level to force a two-dimensional hydrodynamic model of coastal inundation. From the resulting ensemble predictions an estimation of risk by 2100 is established. The results indicate that although the likelihood of extreme sea level rise due to rapid ice sheet mass loss is low, the resulting hazard can be large, resulting in a significant (27%) increase to the projected annual risk. Furthermore, current defence construction guidelines for the coming century in the UK are expected to account for 95% of the sea level rise distribution

Additive theory of prime numbers

CERN Document Server

Hua, L K

2009-01-01

Loo-Keng Hua was a master mathematician, best known for his work using analytic methods in number theory. In particular, Hua is remembered for his contributions to Waring's Problem and his estimates of trigonometric sums. Additive Theory of Prime Numbers is an exposition of the classic methods as well as Hua's own techniques, many of which have now also become classic. An essential starting point is Vinogradov's mean-value theorem for trigonometric sums, which Hua usefully rephrases and improves. Hua states a generalized version of the Waring-Goldbach problem and gives asymptotic formulas for the number of solutions in Waring's Problem when the monomial x^k is replaced by an arbitrary polynomial of degree k. The book is an excellent entry point for readers interested in additive number theory. It will also be of value to those interested in the development of the now classic methods of the subject.

EBRPOCO - a program to calculate detailed contributions of power reactivity components of EBR-II

International Nuclear Information System (INIS)

Meneghetti, D.; Kucera, D.A.

1981-01-01

The EBRPOCO program has been developed to facilitate the calculations of the power coefficients of reactivity of EBR-II loadings. The program enables contributions of various components of the power coefficient to be delineated axially for every subassembly. The program computes the reactivity contributions of the power coefficients resulting from: density reduction of sodium coolant due to temperature; displacement of sodium coolant by thermal expansions of cladding, structural rods, subassembly cans, and lower and upper axial reflectors; density reductions of these steel components due to temperature; displacement of bond-sodium (if present) in gaps by differential thermal expansions of fuel and cladding; density reduction of bond-sodium (if present) in gaps due to temperature; free axial expansion of fuel if unrestricted by cladding or restricted axial expansion of fuel determined by axial expansion of cladding. Isotopic spatial contributions to the Doppler component my also be obtained. (orig.) [de

Induced voltage due to time-dependent magnetisation textures

International Nuclear Information System (INIS)

Kudtarkar, Santosh Kumar; Dhadwal, Renu

2010-01-01

We determine the induced voltage generated by spatial and temporal magnetisation textures (inhomogeneities) in metallic ferromagnets due to the spin diffusion of non-equilibrium electrons. Using time dependent semi-classical theory as formulated in Zhang and Li and the drift-diffusion model of transport it is shown that the voltage generated depends critically on the difference in the diffusion constants of up and down spins. Including spin relaxation results in a crucial contribution to the induced voltage. We also show that the presence of magnetisation textures results in the modification of the conductivity of the system. As an illustration, we calculate the voltage generated due to a time dependent field driven helimagnet by solving the Landau-Lifshitz equation with Gilbert damping and explicitly calculate the dependence on the relaxation and damping parameters.

Influence of Microencapsulated Phase Change Material (PCM) Addition on (Micro) Mechanical Properties of Cement Paste

Science.gov (United States)

Schlangen, Erik

2017-01-01

Excessive cracking can be a serious durability problem for reinforced concrete structures. In recent years, addition of microencapsulated phase change materials (PCMs) to concrete has been proposed as a possible solution to crack formation related to temperature gradients. However, the addition of PCM microcapsules to cementitious materials can have some drawbacks, mainly related to strength reduction. In this work, a range of experimental techniques has been used to characterize the microcapsules and their effect on properties of composite cement pastes. On the capsule level, it was shown that they are spherical, enabling good distribution in the material during the mixing process. Force needed to break the microcapsules was shown to depend on the capsule diameter and the temperature, i.e., whether it is below or above the phase change temperature. On the cement paste level, a marked drop of compressive strength with increasing PCM inclusion level was observed. The indentation modulus has also shown to decrease, probably due to the capsules themselves, and to a lesser extent due to changes in porosity caused by their inclusion. Finally, a novel micro-cube splitting technique was used to characterize the tensile strength of the material on the micro-meter length scale. It was shown that the strength decreases with increasing PCM inclusion percentage, but this is accompanied by a decrease in measurement variability. This study will contribute to future developments of cementitious composites incorporating phase change materials for a variety of applications. PMID:28773225

Addition of magnetic markers for non-destructive evaluation of polymer composites

Directory of Open Access Journals (Sweden)

Ana Paula Pereira Fulco

2011-12-01

Full Text Available Polymer composite pipes are an appealing option as a substitute for conventional steel pipes, particularly due to their inherent corrosion resistance. However, the composite pipes currently used do not allow non-destructive evaluation (NDE using instrumented devices which operate with magnetic sensors. The present work aims at the development of polymer composites with the addition magnetic markers to allow the application non-destructive evaluation techniques which use magnetic sensors. Glass-polyester composite flat, circular plates were fabricated with the addition of ferrite particles (barium ferrite and strontium ferrite and four types of notches were introduced on the plates' surfaces. The influence of these notches on the measured magnetic properties of each material was measured. X-ray diffraction (XRD, X-ray fluorescence (XRF and Brunauer, Emmett, and Teller (BET nitrogen adsorption were used for the characterization of the ferrite particles. Particle dispersion in the polymer matrix was analyzed by scanning electron microscopy (SEM. According to the results, a particular variation in magnetic field was detected over the region surrounding each type of notch. The results suggest that the proposed technique has great potential for damage detection in polymer composites using magnetic sensors and thus constitute a valuable contribution which may ultimately lead to the development of non-destructive evaluation techniques for assessing the structural integrity polymer composite pipes.

Mapping watershed potential to contribute phosphorus from geologic materials to receiving streams, southeastern United States

Science.gov (United States)

Terziotti, Silvia; Hoos, Anne B.; Harned, Douglas; Garcia, Ana Maria

2010-01-01

As part of the southeastern United States SPARROW (SPAtially Referenced Regressions On Watershed attributes) water-quality model implementation, the U.S. Geological Survey created a dataset to characterize the contribution of phosphorus to streams from weathering and erosion of surficial geologic materials. SPARROW provides estimates of total nitrogen and phosphorus loads in surface waters from point and nonpoint sources. The characterization of the contribution of phosphorus from geologic materials is important to help separate the effects of natural or background sources of phosphorus from anthropogenic sources of phosphorus, such as municipal wastewater or agricultural practices. The potential of a watershed to contribute phosphorus from naturally occurring geologic materials to streams was characterized by using geochemical data from bed-sediment samples collected from first-order streams in relatively undisturbed watersheds as part of the multiyear U.S. Geological Survey National Geochemical Survey. The spatial pattern of bed-sediment phosphorus concentration is offered as a tool to represent the best available information at the regional scale. One issue may weaken the use of bed-sediment phosphorus concentration as a surrogate for the potential for geologic materials in the watershed to contribute to instream levels of phosphorus-an unknown part of the variability in bed-sediment phosphorus concentration may be due to the rates of net deposition and processing of phosphorus in the streambed rather than to variability in the potential of the watershed's geologic materials to contribute phosphorus to the stream. Two additional datasets were created to represent the potential of a watershed to contribute phosphorus from geologic materials disturbed by mining activities from active mines and inactive mines.

Estimation of scattering contribution in the calibration of neutron devices with radionuclide sources in rooms of different sizes

Directory of Open Access Journals (Sweden)

Khabaz Rahim

2015-01-01

Full Text Available Calibrations of neutron devices used in area monitoring are often performed by radionuclide neutron sources. Device readings increase due to neutrons scattered by the surroundings and the air. The influence of said scattering effects have been investigated in this paper by performing Monte Carlo simulations for ten different radionuclide neutron sources inside several sizes of concrete wall spherical rooms (Rsp = 200 to 1500 cm. In order to obtain the parameters that relate the additional contribution from scattered neutrons, calculations using a polynomial fit model were evaluated. Obtained results show that the contribution of scattering is roughly independent of the geometric shape of the calibration room. The parameter that relates the room-return scattering has been fitted in terms of the spherical room radius, so as to reasonably accurately estimate the scattering value for each radionuclide neutron source in any geometry of the calibration room.

The inelastic contribution to high resolution images of defects

International Nuclear Information System (INIS)

Krivanek, O.L.; Ahn, C.C.; Wood, G.J.

1990-01-01

The importance of the contribution due to inelastically scattered electrons to unfiltered HREM images is examined, with emphasis on imaging of defects in semiconductors. Whenever the low energy loss spectrum contains sharp peaks, the contribution is not featureless. At specimen thickness of a few tens of nm, it may change the image appearance in a major way. The strongest effect occurs in high resolution, medium voltage (200 to 500 kV) electron microscope images of defects at focus values minimizing the contrast of the elastic image in low Z materials such as Al and Si. In higher Z materials or those with no sharp 'plasmons', the contribution is small. 23 refs., 8 figs

Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions

International Nuclear Information System (INIS)

Bermingham, M.J.; Kent, D.; Zhan, H.; StJohn, D.H.; Dargusch, M.S.

2015-01-01

This study demonstrates that trace boron addition to Ti–6Al–4V coupons produced by additive layer manufacturing is an effective way to eliminate the deleterious anisotropic microstructures often encountered with this manufacturing technique. Trace boron additions (up to 0.13 wt.%) to this alloy eliminate grain boundary-α and colony-α, and instead produce a homogeneous α-microstructure consisting of fine equiaxed α-grains in both as-deposited and heat treated coupons. Prior-β grains remain columnar with boron addition but become narrower due to the wider solidification range and growth restricting effect of the boron solute. Compared to unmodified Ti–6Al–4V alloy, Ti–6Al–4V modified with trace boron additions showed up to 40% improvement in plasticity with no loss in strength under uniaxial compression at room temperature. Boron additions were found to inhibit twinning transmission that causes sudden large load drops during deformation of the unmodified Ti–6Al–4V alloy in the heat treated condition

Thermodynamic Temperatures of High-Temperature Fixed Points: Uncertainties Due to Temperature Drop and Emissivity

Science.gov (United States)

Castro, P.; Machin, G.; Bloembergen, P.; Lowe, D.; Whittam, A.

2014-07-01

This study forms part of the European Metrology Research Programme project implementing the New Kelvin to assign thermodynamic temperatures to a selected set of high-temperature fixed points (HTFPs), Cu, Co-C, Pt-C, and Re-C. A realistic thermal model of these HTFPs, developed in finite volume software ANSYS FLUENT, was constructed to quantify the uncertainty associated with the temperature drop across the back wall of the cell. In addition, the widely applied software package, STEEP3 was used to investigate the influence of cell emissivity. The temperature drop, , relates to the temperature difference due to the net loss of heat from the aperture of the cavity between the back wall of the cavity, viewed by the thermometer, defining the radiance temperature, and the solid-liquid interface of the alloy, defining the transition temperature of the HTFP. The actual value of can be used either as a correction (with associated uncertainty) to thermodynamic temperature evaluations of HTFPs, or as an uncertainty contribution to the overall estimated uncertainty. In addition, the effect of a range of furnace temperature profiles on the temperature drop was calculated and found to be negligible for Cu, Co-C, and Pt-C and small only for Re-C. The effective isothermal emissivity is calculated over the wavelength range from 450 nm to 850 nm for different assumed values of surface emissivity. Even when furnace temperature profiles are taken into account, the estimated emissivities change only slightly from the effective isothermal emissivity of the bare cell. These emissivity calculations are used to estimate the uncertainty in the temperature assignment due to the uncertainty in the emissivity of the blackbody.

Transflective multiplexing of holographic polymer dispersed liquid crystal using Si additives

Directory of Open Access Journals (Sweden)

2011-01-01

Full Text Available Morphology, grating formation dynamics and electro-optical performance of transflective multiplexing with holographic polymer dispersed liquid crystal (HPDLC were investigated in the presence of silica nanoparticles (Aerosil R812 (RS and modified Aerosil 200 (MS and silicon monomer (vinyltrimethoxy silane (VTMS by using three coherent laser beams. The addition of Si additive significantly augmented the diffraction efficiencies of transmission and reflection gratings due to the enhanced phase separation with large LC channels. The film was driven only with Si additives which are enriched at the polymer-LC interfaces. As the additive content increased, driving voltage decreased to a minimum of 30 V at 2.0 wt% VTMS. It was found that the interface modification and large droplet size are crucial to operate the film. Among the three types of Si additive, VTMS showed the highest electro-optical performance due to its low viscosity and high reactivity.

Additive versus multiplicative trade costs and the gains from trade

DEFF Research Database (Denmark)

Sørensen, Allan

This paper addresses welfare effects from trade liberalization in a heterogeneous-fi…rms trade model including the empirically important per-unit (i.e. additive) trade costs in addition to the conventional iceberg (i.e. multiplicative) and fi…xed trade costs. The novel contribution of the paper...... is the result that the welfare gain for a given increase in trade openness is higher for reductions in per-unit (additive) trade costs than for reductions in iceberg (multiplicative) trade costs. The ranking derives from differences in intra-industry reallocations and in particular from dissimilar impacts...

The natural aging and precipitation hardening behaviour of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions

Energy Technology Data Exchange (ETDEWEB)

Ding, Lipeng [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 China (China); Jia, Zhihong, E-mail: zhihongjia@cqu.edu.cn [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 China (China); Zhang, Zhiqing; Sanders, Robert E.; Liu, Qing [College of Materials Science and Engineering, Chongqing University, Chongqing 400044 China (China); Yang, Guang [Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education and International Centre for Dielectric Research, Xi’an Jiaotong University, Xi’an 710049 (China)

2015-03-11

The natural aging and artificial aging behaviours of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions were investigated using Vickers microhardness measurements, differential scanning calorimetry (DSC) analysis and transmission electron microscopy (TEM) characterisation. Excess Si and Cu additions enhanced the alloy hardening ability during natural (NA) and artificial aging (AA). Alloys with low Cu and high Si contents exhibited higher precipitation hardening than alloys rich in Mg during artificial aging. In contrast, the alloys with high amounts of Cu were less dependent on the Mg/Si ratio during precipitation hardening due to their similar aging kinetics. The main precipitate phases that contributed to the peak-aging hardness were the L, Q′ and β″ phases. In the over-aging conditions, the alloys rich in Mg and Cu had finer and more numerous precipitates than their Si-rich equivalents due to the preferential precipitation of the L phase. The combination of excess Mg and high Cu resulted in an alloy with a relatively low hardness in T4 temper and a relatively higher hardness after the paint baking cycle. Thus, this alloy has good potential for use in auto body panel applications.

Greenhouse effect contributions of US landfill methane

International Nuclear Information System (INIS)

Augenstein, D.

1991-01-01

The greenhouse effect has recently been receiving a great deal of scientific and popular attention. The term refers to a cause-and-effect relationship in which ''heat blanketing'' of the earth, due to trace gas increases in the atmosphere, is expected to result in global warming. The trace gases are increasing as the result of human activities. Carbon dioxide (CO 2 ) is the trace gas contributing most importantly to the ''heat blanketing'' and currently receives the most attention. Less widely recognized has been the high importance of methane (CH 4 ). Methane's contribution to the increased heat blanketing occurring since 1980 is estimated to be over a third as much as that of carbon dioxide. Gas from landfills has in turn been recognized to be a source of methane to the atmospheric buildup. However the magnitude of the landfill methane contribution, and the overall significance of landfill methane to the greenhouse phenomenon has been uncertain and the subject of some debate. (Author)

Additive Manufacturing of High-Entropy Alloys by Laser Processing

NARCIS (Netherlands)

Ocelik, V.; Janssen, Niels; Smith, Stefan; De Hosson, J. Th M.

This contribution concentrates on the possibilities of additive manufacturing of high-entropy clad layers by laser processing. In particular, the effects of the laser surface processing parameters on the microstructure and hardness of high-entropy alloys (HEAs) were examined. AlCoCrFeNi alloys with

Additivity vs Synergism: Investigation of the Additive Interaction of Cinnamon Bark Oil and Meropenem in Combinatory Therapy.

Science.gov (United States)

Yang, Shun-Kai; Yusoff, Khatijah; Mai, Chun-Wai; Lim, Wei-Meng; Yap, Wai-Sum; Lim, Swee-Hua Erin; Lai, Kok-Song

2017-11-04

Combinatory therapies have been commonly applied in the clinical setting to tackle multi-drug resistant bacterial infections and these have frequently proven to be effective. Specifically, combinatory therapies resulting in synergistic interactions between antibiotics and adjuvant have been the main focus due to their effectiveness, sidelining the effects of additivity, which also lowers the minimal effective dosage of either antimicrobial agent. Thus, this study was undertaken to look at the effects of additivity between essential oils and antibiotic, via the use of cinnamon bark essential oil (CBO) and meropenem as a model for additivity. Comparisons between synergistic and additive interaction of CBO were performed in terms of the ability of CBO to disrupt bacterial membrane, via zeta potential measurement, outer membrane permeability assay and scanning electron microscopy. It has been found that the additivity interaction between CBO and meropenem showed similar membrane disruption ability when compared to those synergistic combinations which was previously reported. Hence, results based on our studies strongly suggest that additive interaction acts on a par with synergistic interaction. Therefore, further investigation in additive interaction between antibiotics and adjuvant should be performed for a more in depth understanding of the mechanism and the impacts of such interaction.

Additivity vs Synergism: Investigation of the Additive Interaction of Cinnamon Bark Oil and Meropenem in Combinatory Therapy

Directory of Open Access Journals (Sweden)

Shun-Kai Yang

2017-11-01

Full Text Available Combinatory therapies have been commonly applied in the clinical setting to tackle multi-drug resistant bacterial infections and these have frequently proven to be effective. Specifically, combinatory therapies resulting in synergistic interactions between antibiotics and adjuvant have been the main focus due to their effectiveness, sidelining the effects of additivity, which also lowers the minimal effective dosage of either antimicrobial agent. Thus, this study was undertaken to look at the effects of additivity between essential oils and antibiotic, via the use of cinnamon bark essential oil (CBO and meropenem as a model for additivity. Comparisons between synergistic and additive interaction of CBO were performed in terms of the ability of CBO to disrupt bacterial membrane, via zeta potential measurement, outer membrane permeability assay and scanning electron microscopy. It has been found that the additivity interaction between CBO and meropenem showed similar membrane disruption ability when compared to those synergistic combinations which was previously reported. Hence, results based on our studies strongly suggest that additive interaction acts on a par with synergistic interaction. Therefore, further investigation in additive interaction between antibiotics and adjuvant should be performed for a more in depth understanding of the mechanism and the impacts of such interaction.

Laser beam welding of titanium additive manufactured parts

OpenAIRE

Wits, Wessel Willems; Jauregui Becker, Juan Manuel

2015-01-01

In this paper the joinability of titanium Additive Manufactured (AM) parts is explored. Keyhole welding, using a pulsed laser beam, of conventionally produced parts is compared to AM parts. Metal AM parts are notorious for having remaining porosities and other non-isotropic properties due to the layered manufacturing process. This study shows that due to these deficiencies more energy per unit weld length is required to obtain a similar keyhole geometry for titanium AM parts. It is also demon...

Glyoxal contribution to aerosols over Los Angeles

Science.gov (United States)

Balcerak, Ernie

2012-01-01

Laboratory and field studies have indicated that glyoxal (chemical formula OCHCHO), an atmospheric oxidation product of isoprene and aromatic compounds, may contribute to secondary organic aerosols in the atmosphere, which can block sunlight and affect atmospheric chemistry. Some aerosols are primary aerosols, emitted directly into the atmosphere, while others are secondary, formed through chemical reactions in the atmosphere. Washenfelder et al. describe in situ glyoxal measurements from Pasadena, Calif., near Los Angeles, made during summer 2010. They used three different methods to calculate the contribution of glyoxal to secondary atmospheric aerosol and found that it is responsible for 0-0.2 microgram per cubic meter, or 0-4%, of the secondary organic aerosol mass. The researchers also compared their results to those of a previous study that calculated the glyoxal contribution to aerosol for Mexico City. Mexico City had higher levels of organic aerosol mass from glyoxal. They suggest that the lower contribution of glyoxal to aerosol concentrations for Los Angeles may be due to differences in the composition or water content of the aerosols above the two cities. (Journal of Geophysical Research-Atmospheres, doi:10.1029/2011JD016314, 2011)

High strength tungsten heavy alloys with molybdenum additions

International Nuclear Information System (INIS)

Bose, A.; Sims, D.M.; German, R.M.

1987-01-01

Tungsten heavy alloys are candidates for numerous applications based on the unique combination of high density, high strength, and high ductility coupled with excellent machinability. Though there has been considerable research on heavy alloys, the primary focus has been on the ductility. These alloys are well suited for ballistic uses due to their high densities and it is expected that for superior ballistic performance, a high hardness, high strength and moderate ductility alloy would be ideal. The major goal of this investigation was to obtain heavy alloys with hardness greater than HRA 72. It is evident from the phase diagrams that molybdenum, which goes into solution in tungsten, nickel and iron, could act as a potential strengthening addition. With this in view, tungsten heavy alloys with molybdenum additions were fabricated from mixed elemental powders. A baseline composition of 90W-7Ni-3Fe was chosen to its good elongation and moderate strength. The molybdenum additions were made by replacing the tungsten. Compared to the baseline properties with no molybdenum addition, the strength and hardness showed a continuous increase with molybdenum addition. The ductility of the alloy continued to decrease with increasing molybdenum content, but even with 16% wt. % molybdenum of the elongation was still around 6%. An interesting facet of these alloying additions is the grain refinement that is brought about by adding to molybdenum to the system. The grain refinement is related to the lower solubility of tunbsten in the matrix due to partial displacement by molybdenum

Make disruptive technological change happen - The case of additive manufacturing

DEFF Research Database (Denmark)

Maresch, Daniela; Gartner, Johannes

2018-01-01

Disruptive technological change can contribute to a more abundant world. However, potentially disruptive technologies often struggle to significantly influence practice. One prominent example is additive manufacturing (AM). Although AM is often regarded as the next great technological revolution...

Food additives and preschool children.

Science.gov (United States)

Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

2013-02-01

Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

Additive manufacturing for steels: a review

Science.gov (United States)

Zadi-Maad, A.; Rohib, R.; Irawan, A.

2018-01-01

Additive manufacturing (AM) of steels involves the layer by layer consolidation of powder or wire feedstock using a heating beam to form near net shape products. For the past decades, the AM technique reaches the maturation of both research grade and commercial production due to significant research work from academic, government and industrial research organization worldwide. AM process has been implemented to replace the conventional process of steel fabrication due to its potentially lower cost and flexibility manufacturing. This paper provides a review of previous research related to the AM methods followed by current challenges issues. The relationship between microstructure, mechanical properties, and process parameters will be discussed. Future trends and recommendation for further works are also provided.

Estimating additive and non-additive genetic variances and predicting genetic merits using genome-wide dense single nucleotide polymorphism markers.

Directory of Open Access Journals (Sweden)

Guosheng Su

Full Text Available Non-additive genetic variation is usually ignored when genome-wide markers are used to study the genetic architecture and genomic prediction of complex traits in human, wild life, model organisms or farm animals. However, non-additive genetic effects may have an important contribution to total genetic variation of complex traits. This study presented a genomic BLUP model including additive and non-additive genetic effects, in which additive and non-additive genetic relation matrices were constructed from information of genome-wide dense single nucleotide polymorphism (SNP markers. In addition, this study for the first time proposed a method to construct dominance relationship matrix using SNP markers and demonstrated it in detail. The proposed model was implemented to investigate the amounts of additive genetic, dominance and epistatic variations, and assessed the accuracy and unbiasedness of genomic predictions for daily gain in pigs. In the analysis of daily gain, four linear models were used: 1 a simple additive genetic model (MA, 2 a model including both additive and additive by additive epistatic genetic effects (MAE, 3 a model including both additive and dominance genetic effects (MAD, and 4 a full model including all three genetic components (MAED. Estimates of narrow-sense heritability were 0.397, 0.373, 0.379 and 0.357 for models MA, MAE, MAD and MAED, respectively. Estimated dominance variance and additive by additive epistatic variance accounted for 5.6% and 9.5% of the total phenotypic variance, respectively. Based on model MAED, the estimate of broad-sense heritability was 0.506. Reliabilities of genomic predicted breeding values for the animals without performance records were 28.5%, 28.8%, 29.2% and 29.5% for models MA, MAE, MAD and MAED, respectively. In addition, models including non-additive genetic effects improved unbiasedness of genomic predictions.

Consistency requirements on Δ contributions to the NN potential

International Nuclear Information System (INIS)

Rinat, A.S.

1982-04-01

We discuss theories leading to intermediate state NΔ and ΔΔ contributions to Vsub(NN). We focus on the customary addition of Lsub(ΔNπ)' to Lsub(πNN)' in a conventional field theory and argue that overcounting of contributions to tsub(πN) and Vsub(NN) will be the rule. We then discuss the cloudy bag model where a similar interaction naturally arises and which leads to a consistent theory. (author)

Expectations and limitations due to brachial plexus injury: a qualitative study.

Science.gov (United States)

Mancuso, Carol A; Lee, Steve K; Dy, Christopher J; Landers, Zoe A; Model, Zina; Wolfe, Scott W

2015-12-01

This study described physical and psychosocial limitations associated with adult brachial plexus injuries (BPI) and patients' expectations of BPI surgery. During in-person interviews, preoperative patients were asked about expectations of surgery and preoperative and postoperative patients were asked about limitations due to BPI. Postoperative patients also rated improvement in condition after surgery. Data were analyzed with qualitative and quantitative techniques. Ten preoperative and 13 postoperative patients were interviewed; mean age was 37 years, 19 were men, all were employed/students, and most injuries were due to trauma. Preoperative patients cited several main expectations, including pain-related issues, and improvement in arm movement, self-care, family interactions, and global life function. Work-related expectations were tailored to employment type. Preoperative and postoperative patients reported that pain, altered sensation, difficulty managing self-care, becoming physically and financially dependent, and disability in work/school were major issues. All patients reported making major compensations, particularly using the uninjured arm. Most reported multiple mental health effects, were distressed with long recovery times, were self-conscious about appearance, and avoided public situations. Additional stresses were finding and paying for BPI surgery. Some reported BPI impacted overall physical health, life priorities, and decision-making processes. Four postoperative patients reported hardly any improvement, four reported some/a good deal, and five reported a great deal of improvement. BPI is a life-altering event affecting physical function, mental well-being, financial situation, relationships, self-image, and plans for the future. This study contributes to clinical practice by highlighting topics to address to provide comprehensive BPI patient-centered care.

The dilemma of allergy to food additives.

Science.gov (United States)

Bahna, Sami L; Burkhardt, Joshua G

2018-01-01

To provide a brief summary on food additives and to outline a practical approach for evaluating subjects suspected of having reactions to food additives. Information was derived from selected reviews and original articles published in peer-reviewed journals, supplemented by the clinical experience of the authors. Priority was given to studies that used blinded, placebo controlled, oral challenges to confirm adverse reactions to food additives. In addition, selected, appropriately evaluated case reports were included. A large number of food additives are widely used in the food industry. Allergic reactions to additives seem to be rare but are very likely underdiagnosed, primarily due to a low index of suspicion. A wide variety of symptoms to food additives have been reported, but a cause-and-effect relationship has not been well documented in the majority of cases. Reactions to food additives should be suspected in patients who report symptoms related to multiple foods or to a certain food when commercially prepared but not when home made. It is also prudent to investigate food additives in subjects considered to have "idiopathic" reactions. Except for a limited number of natural additives, there is a small role for skin tests or in vitro testing. Oral challenge, in stages, with commonly used additives is the definitive procedure for detecting the offending agent. Once the specific additive is identified, management is strict avoidance, which can be difficult.

77 FR 33895 - Universal Service Contribution Methodology; a National Broadband Plan for Our Future

Science.gov (United States)

2012-06-07

... contribution system in an effort to promote efficiency, fairness, and sustainability. The Commission seeks... improved; and recovery of universal service contributions from consumers. DATES: Comments are due on or... print, electronic files, audio format), send an email to [email protected] or call the Consumer...

Nature and prevalence of non-additive toxic effects in industrially relevant mixtures of organic chemicals.

Science.gov (United States)

Parvez, Shahid; Venkataraman, Chandra; Mukherji, Suparna

2009-06-01

The concentration addition (CA) and the independent action (IA) models are widely used for predicting mixture toxicity based on its composition and individual component dose-response profiles. However, the prediction based on these models may be inaccurate due to interaction among mixture components. In this work, the nature and prevalence of non-additive effects were explored for binary, ternary and quaternary mixtures composed of hydrophobic organic compounds (HOCs). The toxicity of each individual component and mixture was determined using the Vibrio fischeri bioluminescence inhibition assay. For each combination of chemicals specified by the 2(n) factorial design, the percent deviation of the predicted toxic effect from the measured value was used to characterize mixtures as synergistic (positive deviation) and antagonistic (negative deviation). An arbitrary classification scheme was proposed based on the magnitude of deviation (d) as: additive (50%, class-IV) antagonistic/synergistic. Naphthalene, n-butanol, o-xylene, catechol and p-cresol led to synergism in mixtures while 1, 2, 4-trimethylbenzene and 1, 3-dimethylnaphthalene contributed to antagonism. Most of the mixtures depicted additive or antagonistic effect. Synergism was prominent in some of the mixtures, such as, pulp and paper, textile dyes, and a mixture composed of polynuclear aromatic hydrocarbons. The organic chemical industry mixture depicted the highest abundance of antagonism and least synergism. Mixture toxicity was found to depend on partition coefficient, molecular connectivity index and relative concentration of the components.

Charming penguin contributions to charmless B decays into two pseudoscalar mesons

International Nuclear Information System (INIS)

Isola, C.; Pham, T.N.; Ladisa, M.; Nardulli, G.; Santorelli, P.

2002-01-01

We present estimates of the charming penguin contribution to B→Kπ,ππ,Kη,Kη ' decays due to intermediate charmed meson states. We find that this contribution is indeed significant for B→Kπ decays, and its inclusion, together with the tree and penguin terms, produces large branching ratios in agreement with data, though the analysis is affected by large theoretical uncertainties. On the other hand, for B→ππ, Kη, Kη ' decays, the effect of the charming penguin contribution is more modest. We also compute CP asymmetries for B→Kπ, ππ decays, and we obtain rather large results

Progranulin Overproduction Due to Fli-1 Deficiency Contributes to the Resistance of Dermal Fibroblasts to Tumor Necrosis Factor in Systemic Sclerosis.

Science.gov (United States)

Ichimura, Yohei; Asano, Yoshihide; Akamata, Kaname; Noda, Shinji; Taniguchi, Takashi; Takahashi, Takehiro; Toyama, Tetsuo; Tada, Yayoi; Sugaya, Makoto; Sato, Shinichi; Kadono, Takafumi

2015-12-01

Progranulin is a growth factor that is active in wound repair and is an antagonist of tumor necrosis factor (TNF) receptors, regulating fibroblast activation, angiogenesis, and inflammation. Because long-standing activation of gene programs related to wound healing is a hallmark of systemic sclerosis (SSc), we sought to investigate the role of progranulin in SSc. Progranulin expression levels in human and murine skin samples were determined by immunohistochemical analysis and quantitative reverse transcription-polymerase chain reaction. The role of progranulin in fibroblast activation was examined using a gene-silencing technique. Progranulin levels in serum obtained from 60 patients with SSc and 16 healthy control subjects were determined by enzyme-linked immunosorbent assay. Progranulin expression was increased in SSc dermal fibroblasts compared with normal dermal fibroblasts, both in vivo and in vitro. Transcription factor Fli-1, a deficiency of which is involved in the activation of SSc dermal fibroblasts, served as a potent repressor of the progranulin gene, and Fli-1(+/-) mice and bleomycin-treated wild-type mice exhibited up-regulated expression of progranulin in dermal fibroblasts. SSc dermal fibroblasts were resistant to the antifibrotic effect of TNF, but this resistance was reversed by gene silencing of progranulin. Serum progranulin levels were elevated in patients with early diffuse cutaneous SSc (dcSSc), especially in those with inflammatory skin symptoms, and were positively correlated with the C-reactive protein level. Progranulin overproduction due to Fli-1 deficiency may contribute to the constitutive activation of SSc dermal fibroblasts by antagonizing the antifibrotic effect of TNF. Progranulin may also be involved in the inflammatory process associated with progressive skin sclerosis in early dcSSc. © 2015, American College of Rheumatology.

Additive manufacturing: state-of-the-art and application framework

DEFF Research Database (Denmark)

Rodrigues, Vinicius Picanco; de Senzi Zancul, Eduardo; Gonçalves Mançanares, Cauê

2017-01-01

Additive manufacturing encompasses a class of production processes with increasing applications indifferent areas and supply chains. Due to its flexibility for production in small batches and the versatilityof materials and geometries, this technology is recognized as being capable...... of revolutionizing theproduction processes as well as changing production strategies that are currently employed. However,there are different technologies under the generic label of additive manufacturing, materials and applicationareas with different requirements. Given the growing importance of additive...... manufacturingas a production process, and also considering the need to have a better insight into the potential applicationsfor driving research and development efforts, this article presents a proposal of organizationfor additive manufacturing applications in seven areas. Additionally, the article provides...

Irradiation deformation due to SIPA induced dislocation anisotropy

International Nuclear Information System (INIS)

Woo, CH.

1980-02-01

A contribution to irradiation deformation resulting from the stress-induced preferred adsorption (SIPA) effect is considered. SIPA causes a variation of the growth rates of irradiation-generated dislocation loops, according to the alignment of their Burgers vectors with respect to the applied stress. A prolinged period under an applied stress then creates an anisotropic dislocation structure in which the majority of dislocations have their Burgers vectors in alignment with the stress. In the presence of 'neutral' sinks, the resulting anisotropic dislocation structure causes plastic deformation similar to the way in which irradiation growth occurs in zirconium. This mechanism is called SIPA-induced growth (SIG). We have shown that SIG is very significant in comparison to SIPA, except when little or no loop growth has occurred during the period the stress is applied. This report contains the detailed formulation and derivation of the formulae for the evaluation of the contribution due to SIG. (auth)

Study of the dislocation contribution to the internal friction background of gold

Science.gov (United States)

Baur, J.; Benoit, W.

1987-04-01

The dislocation contribution to the internal friction (IF) background is studied in annealed gold samples containing various dilute concentrations of platinum impurities. The measurements are performed in the kHz frequency range in order to determine the loss mechanism responsible for the high IF background observed at these low frequencies. To this end, the IF background was systematically measured as a function of frequency, vibration amplitude, temperature, and impurity concentration. The experimental results show that the high dislocation contribution observed in annealed samples is strain-amplitude independent for amplitudes in the range 10-7 to 2×10-6, but rapidly decreases for amplitudes smaller than 10-7. In particular, the dislocation contribution tends to zero when the strain amplitude tends to zero. Furthermore, this contribution is frequency independent. These observations demonstrate that the dislocation contribution cannot be explained by relaxations. In particular, this contribution cannot be attributed to a viscous damping of the dislocation motion. On the contrary, the experiments show that the IF background due to dislocations must be explained by hysteretic and athermal motions of dislocations interacting with point defects. However, these hysteretic motions are not due to breakaway of dislocations from pinning points distributed along their length. The experimental results can be explained by the presence of point defects close to the dislocations, but not on them. The mechanical energy loss is attributed to hysteretic motions of dislocations between potential minima created by point defects.

Pleistocene vertebrates from Celebes : XIV. Additions to the Archidiskodon-Celebochoerus fauna

NARCIS (Netherlands)

Hooijer, D.A.

1972-01-01

A joint Dutch-Indonesian expedition to Celebes in 1970 worked especially in the Beru area whence the first described Pleistocene Celebes vertebrate remains came. In the present contribution I shall describe the most important specimens that have been brought to light. My thanks are due to Mr. R. P.

Contributions of ludic care in nursing to chemical detoxification due to the use of crack cocaine

Directory of Open Access Journals (Sweden)

Paola Aparecida Pavanatto

Full Text Available OBJECTIVE: to understand the contributions of ludic care in nursing by stimulating the acceptance of chemical detoxification from crack on the perception of people in the detoxification process. METHODS: an exploratory, descriptive study with a qualitative approach, performed with five people hospitalized for chemical detoxification from crack, from March to July 2013 in a chemical detox unit of a midsize hospital in the central region of Rio Grande do Sul. Data was collected using a semi-structured interview and was subjected to content analysis. RESULTS: Two categories emerged: Ludic care in nursing as a stimulus to the acceptance of chemical detoxification; Ludic care in nursing in the promotion for healthy living after chemical detoxification. CONCLUSION: ludic care in nursing proved to enhance the acceptance of chemical detoxification from crack in the reality investigated.

Additives: The key for automobiles to meet new emission standards

International Nuclear Information System (INIS)

Friedman, J.R.

1992-01-01

Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

Studies of alumina additions in zirconia - magnesia

International Nuclear Information System (INIS)

Muccillo, R.

1987-01-01

Ionic conductivity measurements have been carried out in the 500 0 C - 1000 0 C temperature range in Mg - PSZ (Partially Stabilized Zirconia) with 0.5 to 10 mol % alumina additions. All specimens were prepared by pressing followed by pre - and sintering at 1000 0 C/2h and1450 0 C/4h, respectively. Thermal histerysis of the ionic conductivity have been detected, probably due to phase changes in the Mg-PSZ samples. The results show that alumina additions up to 2.1% enhances densification with no major variations in electrical resistivity values. (Author) [pt

Additive manufacture with IN625 superalloy using laser and plasma transferred arc

International Nuclear Information System (INIS)

Cardozo, Eloisa Pereira; D'Oliveira, Ana Sofia C.M.; Ganguly, Supryio; Pardal, Goncalo Rodrigues

2016-01-01

Full text: Additive manufacturing of mechanical components processed with metallic alloys is a growing market due to its full potential over the traditional manufacturing. Material efficiency is a key factor towards the selection of AM procedures, particularly for parts fabricated with high cost alloys such as Ni based alloys. Inspite the advantages of this innovative technique many challenges have to be met before its wide acceptance by industries from different sectors. This study contributes to the current knowledge progress regarding the analysis of AM parts processed by laser and Plasma transferred arc (PTA). IN625 Ni based alloy, layer by- layer parts were processed and analyzed in the as processed condition and after homogenization heat treatment. Characterization was carried out by confocal and scanning electron microscopy, X-ray diffraction and microhardness profile. Results revealed similar hardness although laser AM specimens exhibited a finer structure. Data acquire after the homogenization heat treatment suggests the as processed PTA samples to have a more stable microstructure. Discussion highlights the potential of each technique and their competitiveness. (author)

Additive manufacture with IN625 superalloy using laser and plasma transferred arc

Energy Technology Data Exchange (ETDEWEB)

Cardozo, Eloisa Pereira; D' Oliveira, Ana Sofia C.M., E-mail: elocrdz@gmail.com [Universidade Federal do Parana (UFPR), PR (Brazil); Ganguly, Supryio; Pardal, Goncalo Rodrigues [Cranfield University, Bedford (United Kingdom)

2016-07-01

Full text: Additive manufacturing of mechanical components processed with metallic alloys is a growing market due to its full potential over the traditional manufacturing. Material efficiency is a key factor towards the selection of AM procedures, particularly for parts fabricated with high cost alloys such as Ni based alloys. Inspite the advantages of this innovative technique many challenges have to be met before its wide acceptance by industries from different sectors. This study contributes to the current knowledge progress regarding the analysis of AM parts processed by laser and Plasma transferred arc (PTA). IN625 Ni based alloy, layer by- layer parts were processed and analyzed in the as processed condition and after homogenization heat treatment. Characterization was carried out by confocal and scanning electron microscopy, X-ray diffraction and microhardness profile. Results revealed similar hardness although laser AM specimens exhibited a finer structure. Data acquire after the homogenization heat treatment suggests the as processed PTA samples to have a more stable microstructure. Discussion highlights the potential of each technique and their competitiveness. (author)

Doping and bond length contributions to Mn K-edge shift in La1 ...

Indian Academy of Sciences (India)

... corresponds to the shift in the center of gravity of the unoccupied Mn 4-band contributing to the Mn K-absorption edge region. This correspondence is then used to separate the doping and size contributions to the edge shift due to variation in the number of electrons in valence band and Mn-O bond lengths, respectively, ...

Additive manufacturing of tunable lenses

Science.gov (United States)

Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

2017-02-01

Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

Reproductive outcomes of female patients with congenital adrenal hyperplasia due to 21-hydroxylase defi ciency

Directory of Open Access Journals (Sweden)

Mouna Feki Mnif

2013-01-01

Full Text Available Fertility in women with congenital adrenal hyperplasia (CAH due to 21-hydroxylase deficiency (21-OHD appears to be reduced, especially in women with the classic salt-wasting type. Several factors have been suggested to contribute to this subfertility such as androgen excess, adrenal progesterone hypersecretion, consequences of genital reconstructive surgery, secondary polycystic ovaries syndrome, and psychosexual factors. In contrast to this subfertility, pregnancies are commonly normal and uneventful. Adequate glucocorticoid therapy and improvement of surgical and psychological management could contribute to optimize fertility in CAH female patients, even among women with the classic variant. This review provides current information regarding the reproductive outcomes of women with CAH due to 21-OHD and the fertility and pregnancy issues in this population.

Conduction band-edge d-states in high-k dielectrics due to Jahn-Teller term splittings

International Nuclear Information System (INIS)

Lucovsky, G.; Fulton, C.C.; Zhang, Y.; Luning, J.; Edge, L.; Whitten, J.L.; Nemanich, R.J.; Schlom, D.G.; Afanase'v, V.V.

2005-01-01

X-ray absorption spectroscopy (XAS) is used to study conduction band edge electronic structure of high-k transition metal (TM) and trivalent lanthanide series rare earth (RE) oxide dielectrics. Empty TM/RE d-states are studied by intra-atomic transitions originating in core level spin-orbit split p-states, and conduction band states are studied in inter-atomic transitions which originate in the oxygen atom 1s core level state. In non-crystalline Zr and Hf silicate alloys, the local bonding symmetry, or crystal field splits these d-states into doubly and triply degenerate features. In nano-crystalline oxides, there are additional d-state splittings due to contributions of more distant neighbors that completely remove d-state degeneracies via the Jahn-Teller effect mechanism. This gives rise to highly localized band edge states that are electronically active in photoconductivity, internal photoemission, and act as bulk traps in metal oxide semiconductor (MOS) devices

Common Ion Effects In Zeoponic Substrates: Dissolution And Cation Exchange Variations Due to Additions of Calcite, Dolomite and Wollastonite

Science.gov (United States)

Beiersdorfer, R. E.; Ming, D. W.; Galindo, C., Jr.

2003-01-01

c1inoptilolite-rich tuff-hydroxyapatite mixture (zeoponic substrate) has the potential to serve as a synthetic soil-additive for plant growth. Essential plant macro-nutrients such as calcium, phosphorous, magnesium, ammonium and potassium are released into solution via dissolution of the hydroxyapatite and cation exchange on zeolite charged sites. Plant growth experiments resulting in low yield for wheat have been attributed to a Ca deficiency caused by a high degree of cation exchange by the zeolite. Batch-equilibration experiments were performed in order to determine if the Ca deficiency can be remedied by the addition of a second Ca-bearing, soluble, mineral such as calcite, dolomite or wollastonite. Variations in the amount of calcite, dolomite or wollastonite resulted in systematic changes in the concentrations of Ca and P. The addition of calcite, dolomite or wollastonite to the zeoponic substrate resulted in an exponential decrease in the phosphorous concentration in solution. The exponential rate of decay was greatest for calcite (5.60 wt. % -I), intermediate for wollastonite (2.85 wt.% -I) and least for dolomite (1.58 wt.% -I). Additions of the three minerals resulted in linear increases in the calcium concentration in solution. The rate of increase was greatest for calcite (3.64), intermediate for wollastonite (2.41) and least for dolomite (0.61). The observed changes in P and Ca concentration are consistent with the solubilities of calcite, dolomite and wollastonite and with changes expected from a common ion effect with Ca. Keywords: zeolite, zeoponics, common-ion effect, clinoptilolite, hydroxyapatite

Years of Life Lost Due to External Causes of Death in the Lodz Province, Poland

Science.gov (United States)

Pikala, Malgorzata; Bryla, Marek; Bryla, Pawel; Maniecka-Bryla, Irena

2014-01-01

Background The aim of the study is the analysis of years of life lost due to external causes of death, particularly due to traffic accidents and suicides. Materials and Methods The study material includes a database containing information gathered from 376,281 death certificates of inhabitants of the Lodz province who died between 1999 and 2010. The Lodz province is characterized by the highest mortality rates in Poland. The SEYLLp (Standard Expected Years of Life Lost per living person) and the SEYLLd (per death) indices were used to determine years of life lost. Joinpoint models were used to analyze time trends. Results In 2010, deaths due to external causes constituted 6.0% of the total number of deaths. The standardized death rate (SDR) due to external causes was 110.0 per 100,000 males and was five times higher than for females (22.0 per 100,000 females). In 2010, the SEYLLp due to external causes was 3746 per 100,000 males and 721 per 100,000 females. Among males, suicides and traffic accidents were the most common causes of death (the values of the SEYLLp were: 1098 years and 887 years per 100,000 people, respectively). Among females, the SEYLLp values were 183 years due to traffic accidents and 143 years due to suicides (per 100,000 people). Conclusions A decrease in the number of years of life lost due to external causes is much higher among females. The authors observe that a growing number of suicides contribute to an increase in the value of the SEYLLp index. This directly contributes to over-mortality of males due to external causes. The analysis of the years of life lost focuses on the social and economic aspects of premature mortality due to external causes. PMID:24810942

Method and device for the determination of material loss due to corrosion and/or erosion

International Nuclear Information System (INIS)

Dugstad, A.; Videm, K.

1990-01-01

The invention relates to a method and an apparatus for gauging material loss due to corrosion and/or erosion during a certain period of time from a given piece of material which previously has been made radioactive. The material loss is determined by measuring the intensity of the radiactive radiation from the material by means of a radiation intensity meter disposed at a measuring site a fixed distance from said piece of material for the measurement of the radioactive radiation from the piece both at the beginning and at the end of said period of time. Each of the measurements is calibrated by means of an additional radiation source disposed for controllably adopting either a most radiation screened position or alternatively a least screened position with respect to a radiation screen, and thereby providing a known radiation intensity at the measuring site in both positions. The least radiation screened position provides full unscreened radiation intensity at the measuring site, whereas the most screened position provides negligible radiation intensity at said site. The measurement results in the two positions are subsequently compared in order to deduce the contribution of said piece of material to the combined radiation intensity in proporsion to the known contribution of the radiation source. The additional radiation source is preferable made from a calibration body composed of the same material as the piece of material exposed to corrosion and/or erosion, the calibration body body being activated at the same time and by the same activation process as said piece. The calibration body is preferably dimensioned to provide at all time the same radiation intensity at the measuring site as a predetermined material loss from the piece of material, e.g. a prefixed thickness reduction of the same. 4 figs

Transition from out-of-plane to in-plane contribution for the optical second harmonic generation response from a silver metallic nanoparticle film

Energy Technology Data Exchange (ETDEWEB)

El Harfouch, Yara; Benichou, Emmanuel; Pu, Lin; Bachelier, Guillaume; Russier-Antoine, Isabelle; Jonin, Christian; Brevet, Pierre-Francois, E-mail: Emmanuel.Benichou@lasim.univ-lyon1.fr [Laboratoire de Spectrometrie Ionique et Moleculaire, Universite Claude Bernard Lyon 1-CNRS (UMR 5579), Batiment Alfred Kastler, 43 boulevard du 11 Novembre 1918, F-69622 Villeurbanne Cedex (France)

2011-06-29

The time evolution of the second harmonic generation (SHG) intensity during the formation of a silver spherical nanoparticle film at the water/1,2-dichloroethane interface is reported. The 5 nm diameter silver nanoparticles were initially dispersed in the water phase and their precipitation at the interface was triggered with the addition of sodium chloride. The time evolution of the SHG intensity exhibited two distinct regimes. First, an intensity increase was observed during the film formation with the deposition and the reorganization of the nanoparticles at the interface. Then, a slow decrease of the intensity due to rearrangements within the film was observed. Polarization-resolved experiments were also performed and showed that the initial dominant out-of-plane contribution of the quadratic nonlinearity underwent a reorientational change towards a dominant in-plane contribution associated with a smoother but still discontinuous metallic film.

Productivity loss due to overweight and obesity: a systematic review of indirect costs.

Science.gov (United States)

Goettler, Andrea; Grosse, Anna; Sonntag, Diana

2017-10-05

The increasingly high levels of overweight and obesity among the workforce are accompanied by a hidden cost burden due to losses in productivity. This study reviews the extent of indirect cost of overweight and obesity. A systematic search was conducted in eight electronic databases (PubMed, Cochrane Library, Web of Science Core Collection, PsychInfo, Cinahl, EconLit and ClinicalTrial.gov). Additional studies were added from reference lists of original studies and reviews. Studies were eligible if they were published between January 2000 and June 2017 and included monetary estimates of indirect costs of overweight and obesity. The authors reviewed studies independently and assessed their quality. Of the 3626 search results, 50 studies met the inclusion criteria. A narrative synthesis of the reviewed studies revealed substantial costs due to lost productivity among workers with obesity. Especially absenteeism and presenteeism contribute to high indirect costs. However, the methodologies and results vary greatly, especially regarding the cost of overweight, which was even associated with lower indirect costs than normal weight in three studies. The evidence predominantly confirms substantial short-term and long-term indirect costs of overweight and obesity in the absence of effective customised prevention programmes and thus demonstrates the extent of the burden of obesity beyond the healthcare sector. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Laser beam welding of titanium additive manufactured parts

NARCIS (Netherlands)

Wits, Wessel Willems; Jauregui Becker, Juan Manuel

2015-01-01

In this paper the joinability of titanium Additive Manufactured (AM) parts is explored. Keyhole welding, using a pulsed laser beam, of conventionally produced parts is compared to AM parts. Metal AM parts are notorious for having remaining porosities and other non-isotropic properties due to the

Price Response to Factor Index Additions and Deletions

NARCIS (Netherlands)

J.J. Huij (Joop); G.S. Kyosev (Georgi)

2016-01-01

textabstractAbnormal price reaction around S&P 500 index changes has been considered as strong evidence that long term demand for stocks is downward sloping. This notion, however, has recently lost popularity due to the evidence that new additions are accompanied with a contemporaneous change in

Numerical simulation of baseflow modification due to effects of ...

African Journals Online (AJOL)

Numerical simulation of baseflow modification due to effects of sediment yield. ... Physically-based mathematical modelling affords the opportunity to look at this kind of interaction, which should be simulated by deterministic responses of both water and fluvial processes. In addition to simulating the streamflow and ...

Photon contributions from the 252Cf and 241Am–Be neutron sources at the PSI Calibration Laboratory

International Nuclear Information System (INIS)

Hoedlmoser, H.; Boschung, M.; Meier, K.; Stadtmann, H.; Hranitzky, C.; Figel, M.; Mayer, S.

2012-01-01

At the accredited PSI Calibration Laboratory neutron reference fields traceable to the national standards of the Physikalisch-Technische Bundesanstalt (PTB) in Germany are available for the calibration of ambient and personal dose equivalent (rate) meters and passive dosimeters. The photon contribution to the ambient dose equivalent in the neutron fields of the 252 Cf and 241 Am–Be sources was measured using various photon dose rate meters and active and passive dosimeters. Measuring photons from a neutron source usually involves considerable uncertainties due to the presence of neutron induced photons in the room, due to a non-zero neutron sensitivity of the photon detector, and last but not least due to the energy response of the photon detectors. Therefore eight independent detectors and methods were used to obtain a reliable estimate for the photon contribution of the two sources as an average of the individual methods. For the 241 Am–Be source a photon contribution of approximately 4.9% was determined and for the 252 Cf source a contribution of 3.6%.

Understanding the CDM's contribution to technology transfer

International Nuclear Information System (INIS)

Schneider, Malte; Holzer, Andreas; Hoffmann, Volker H.

2008-01-01

Developing countries are increasingly contributing to global greenhouse gas emissions and, consequently, climate change as a result of their rapid economic growth. In order to reduce their impact, the private sector needs to be engaged in the transfer of low-carbon technology to those countries. The Clean Development Mechanism (CDM) is currently the only market mechanism aimed at triggering changes in the pattern of emissions-intensive activities in developing countries and is likely to play a role in future negotiations. In this paper, we analyse how the CDM contributes to technology transfer. We first develop a framework from the literature that delineates the main factors which characterise technology transfer. Second, we apply this framework to the CDM by assessing existing empirical studies and drawing on additional expert interviews. We find that the CDM does contribute to technology transfer by lowering several technology-transfer barriers and by raising the transfer quality. On the basis of this analysis, we give preliminary policy recommendations

Modeling and analysis of solar wind generated contributions to the near-Earth magnetic field

DEFF Research Database (Denmark)

Vennerstrøm, Susanne; Moretto, T.; Rastatter, L.

2006-01-01

Solar wind generated magnetic disturbances are currently one of the major obstacles for improving the accuracy in the determination of the magnetic field due to sources internal to the Earth. In the present study a global MHD model of solar wind magnetosphere interaction is used to obtain...... a physically consistent, divergence-free model of ionospheric, field-aligned and magnetospheric currents in a realistic magnetospheric geometry. The magnetic field near the Earth due to these currents is analyzed by estimating and comparing the contributions from the various parts of the system, with the aim...... of identifying the most important aspects of the solar wind disturbances in an internal field modeling context. The contribution from the distant magnetospheric currents is found to consist of two, mainly opposing, contributions from respectively the dayside magnetopause currents and the cross-tail current...

Award for Distinguished Scientific Contributions: Steven F. Maier

Science.gov (United States)

American Psychologist, 2009

2009-01-01

Steven F. Maier, winner of the Award for Distinguished Scientific Contributions, is cited for his work in the fields of learned helplessness; cytokines, depressed mood, and cognitive interference; and the brain structures that produce and counteract learned helplessness. In addition to the citation, a biography and selected bibliography of Maier's…

Analysis Of Resistance And Effective Wake Friction Due To Addition Of Stern Tunnels On Passenger Ship Using Cfd

Science.gov (United States)

Chrismianto, D.; Tuswan; Manik, P.

2018-03-01

In this study, the stern tunnel to improve the efficiency of ship propulsion system is analysed. Stern tunnels installed on the two sides of the ship stern. Analysis of ship resistance and wake friction of the ship using CFD are carried out. The stern tunnel height (Hw) and length (L) are implemented to find the better stern tunnel form of the ship. The result of analysis showed that model has a high stern tunnels (Hw) of 1,444 m or additional high stern tunnels ratio of 16% and stern long tunnels (L) about 7 m is a model that has the smallest resistance about 1.1137 N or able to make reduction of resistance amount 11.2582%. While, the model with the addition of height of 0.2 m and a length of 9 m of stern tunnel is a model that has the better advanced speed about 4,927% in increase, and better wake friction about 30.4% in reduce.

POET: Planetary Orbital Evolution due to Tides

Science.gov (United States)

Penev, Kaloyan

2014-08-01

POET (Planetary Orbital Evolution due to Tides) calculates the orbital evolution of a system consisting of a single star with a single planet in orbit under the influence of tides. The following effects are The evolutions of the semimajor axis of the orbit due to the tidal dissipation in the star and the angular momentum of the stellar convective envelope by the tidal coupling are taken into account. In addition, the evolution includes the transfer of angular momentum between the stellar convective and radiative zones, effect of the stellar evolution on the tidal dissipation efficiency, and stellar core and envelope spins and loss of stellar convective zone angular momentum to a magnetically launched wind. POET can be used out of the box, and can also be extended and modified.

The Bias of the Gini Coefficient due to Grouping

NARCIS (Netherlands)

T.G.M. van Ourti (Tom); Ph. Clarke (Philip)

2008-01-01

textabstractWe propose a first order bias correction term for the Gini index to reduce the bias due to grouping. The first order correction term is obtained from studying the estimator of the Gini index within a measurement error framework. In addition, it reveals an intuitive formula for the

Rare symbionts may contribute to the resilience of coral–algal assemblages

KAUST Repository

Ziegler, Maren

2017-12-01

The association between corals and photosynthetic dinoflagellates (Symbiodinium spp.) is the key to the success of reef ecosystems in highly oligotrophic environments, but it is also their Achilles‘ heel due to its vulnerability to local stressors and the effects of climate change. Research during the last two decades has shaped a view that coral host–Symbiodinium pairings are diverse, but largely exclusive. Deep sequencing has now revealed the existence of a rare diversity of cryptic Symbiodinium assemblages within the coral holobiont, in addition to one or a few abundant algal members. While the contribution of the most abundant resident Symbiodinium species to coral physiology is widely recognized, the significance of the rare and low abundant background Symbiodinium remains a matter of debate. In this study, we assessed how coral–Symbiodinium communities assemble and how rare and abundant components together constitute the Symbiodinium community by analyzing 892 coral samples comprising >110 000 unique Symbiodinium ITS2 marker gene sequences. Using network modeling, we show that host–Symbiodinium communities assemble in non-random ‘clusters‘ of abundant and rare symbionts. Symbiodinium community structure follows the same principles as bacterial communities, for which the functional significance of rare members (the ‘rare bacterial biosphere’) has long been recognized. Importantly, the inclusion of rare Symbiodinium taxa in robustness analyses revealed a significant contribution to the stability of the host–symbiont community overall. As such, it highlights the potential functions rare symbionts may provide to environmental resilience of the coral holobiont.

Contribution of radiation-induced, nitric oxide-mediated bystander effect to radiation-induced adaptive response.

Science.gov (United States)

Matsumoto, H.; Ohnishi, T.

There has been a recent upsurge of interest in radiation-induced adaptive response and bystander effect which are specific modes in stress response to low-dose low-dose rate radiation Recently we found that the accumulation of inducible nitric oxide NO synthase iNOS in wt p53 cells was induced by chronic irradiation with gamma rays followed by acute irradiation with X-rays but not by each one resulting in an increase in nitrite concentrations of medium It is suggested that the accumulation of iNOS may be due to the depression of acute irradiation-induced p53 functions by pre-chronic irradiation In addition we found that the radiosensitivity of wt p53 cells against acute irradiation with X-rays was reduced after chronic irradiation with gamma rays This reduction of radiosensitivity of wt p53 cells was nearly completely suppressed by the addition of NO scavenger carboxy-PTIO to the medium This reduction of radiosensitivity of wt p53 cells is just radiation-induced adaptive response suggesting that NO-mediated bystander effect may considerably contribute to adaptive response induced by radiation

Harmonic Resonance in Power Transmission Systems due to the Addition of Shunt Capacitors

Science.gov (United States)

Patil, Hardik U.

Shunt capacitors are often added in transmission networks at suitable locations to improve the voltage profile. In this thesis, the transmission system in Arizona is considered as a test bed. Many shunt capacitors already exist in the Arizona transmission system and more are planned to be added. Addition of these shunt capacitors may create resonance conditions in response to harmonic voltages and currents. Such resonance, if it occurs, may create problematic issues in the system. It is main objective of this thesis to identify potential problematic effects that could occur after placing new shunt capacitors at selected buses in the Arizona network. Part of the objective is to create a systematic plan for avoidance of resonance issues. For this study, a method of capacitance scan is proposed. The bus admittance matrix is used as a model of the networked transmission system. The calculations on the admittance matrix were done using Matlab. The test bed is the actual transmission system in Arizona; however, for proprietary reasons, bus names are masked in the thesis copy intended for the public domain. The admittance matrix was obtained from data using the PowerWorld Simulator after equivalencing the 2016 summer peak load (planning case). The full Western Electricity Coordinating Council (WECC) system data were used. The equivalencing procedure retains only the Arizona portion of the WECC. The capacitor scan results for single capacitor placement and multiple capacitor placement cases are presented. Problematic cases are identified in the form of 'forbidden response. The harmonic voltage impact of known sources of harmonics, mainly large scale HVDC sources, is also presented. Specific key results for the study indicated include: (1) The forbidden zones obtained as per the IEEE 519 standard indicates the bus 10 to be the most problematic bus. (2) The forbidden zones also indicate that switching values for the switched shunt capacitor (if used) at bus 3 should be

Additive versus Multiplicative Trade Costs and the Gains from Trade Liberalizations

DEFF Research Database (Denmark)

Sørensen, Allan

2014-01-01

This paper addresses welfare e¤ects from trade liberalization in a Melitz (2003) heterogeneous-…rms trade model including the empirically important per-unit (i.e. additive) trade costs in addition to the conventional iceberg (i.e. multiplicative) and …xed trade costs. The novel contribution...... of the pa- per is the result that the welfare gain for a given increase in trade openness is higher for reductions in per-unit (additive) trade costs than for reductions in iceberg (multiplicative) trade costs. The ranking derives from di¤erences in intra-industry reallocations and in particular from...

Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing

Science.gov (United States)

MacDonald, D.; Fernández, R.; Delloro, F.; Jodoin, B.

2017-04-01

Titanium parts are ideally suited for aerospace applications due to their unique combination of high specific strength and excellent corrosion resistance. However, titanium as bulk material is expensive and challenging/costly to machine. Production of complex titanium parts through additive manufacturing looks promising, but there are still many barriers to overcome before reaching mainstream commercialization. The cold gas dynamic spraying process offers the potential for additive manufacturing of large titanium parts due to its reduced reactive environment, its simplicity to operate, and the high deposition rates it offers. A few challenges are to be addressed before the additive manufacturing potential of titanium by cold gas dynamic spraying can be reached. In particular, it is known that titanium is easy to deposit by cold gas dynamic spraying, but the deposits produced are usually porous when nitrogen is used as the carrier gas. In this work, a method to manufacture low-porosity titanium components at high deposition efficiencies is revealed. The components are produced by combining low-pressure cold spray using nitrogen as the carrier gas with low-cost titanium powder produced using the Armstrong process. The microstructure and mechanical properties of additive manufactured titanium components are investigated.

A Dynamic Model for Roll Motion of Ships due to Flooding

DEFF Research Database (Denmark)

Xia, Jinzhu; Jensen, Jørgen Juncher; Pedersen, Preben Terndrup

1999-01-01

Because of the large undivided deck spaces, RoRo vessels are often sensitive to rapid capsizing due to sudden ingress of water. Following a high-energy damage, a rapidly increasing heeling moment is induced by the ingress of water, which generates a roll motion of the damaged vessel. If, addition......Because of the large undivided deck spaces, RoRo vessels are often sensitive to rapid capsizing due to sudden ingress of water. Following a high-energy damage, a rapidly increasing heeling moment is induced by the ingress of water, which generates a roll motion of the damaged vessel. If......, additionally, the car deck is flooded and/or the cargo is shifted, the heeling moment may exceed the residual restoring moment, which results in capsizing....

Effects of site substitution and metal ion addition on doped manganites

CERN Document Server

Pradhan, A K; Roul, B K; Sahu, D R; Muralidhar, M

2002-01-01

We report transport, magnetization and transmission electron microscopy studies of the effects of A-and B-site substitution, and the addition of metal ions such as Pt, Ag and Sr, on doped ABO sub 3 perovskites, where A = La, Pr etc and B = Mn. Disorder induced by such substitution changes the behaviour of the charge-ordered (CO) state significantly. A-and B-site substitution suppresses the CO phase due to size mismatch and disorder produced by inhomogeneity. On the other hand, addition of metal ions such as Pt and Ag improves several colossal-magnetoresistance properties significantly due to microstructural effects and enhanced current percolation through grain boundaries.

A Multi-task Principal Agent Model for Knowledge Contribution of Enterprise Staff

Directory of Open Access Journals (Sweden)

Chengyi LE

2016-10-01

Full Text Available According to the different behavior characteristics of knowledge contribution of enterprise employees, a multi-task principal-agent relationship of knowledge contribution between enterprise and employees is established based on principal-agent theory, analyzing staff’s knowledge contribution behavior of knowledge creation and knowledge participation. Based on this, a multi-task principal agent model for knowledge contribution of enterprise staff is developed to formulate the asymmetry of information in knowledge contribution Then, a set of incentive measures are derived from the theoretic model, aiming to prompt the knowledge contribution in enterprise. The result shows that staff’s knowledge creation behavior and positive participation behavior can influence and further promote each other Enterprise should set up respective target levels of both knowledge creation contribution and knowledge participation contribution and make them irreplaceable to each other. This work contributes primarily to the development of the literature on knowledge management and principal-agent theory. In addition, the applicability of the findings will be improved by further empirical analysis.

Additive Manufacturing and Business Models: Current Knowledge and Missing Perspectives

Directory of Open Access Journals (Sweden)

Christina Öberg

2018-06-01

Full Text Available Additive manufacturing, that is 3D printing technology, may change the way companies operate their businesses. This article adopts a business model perspective to create an understanding of what we know about these changes. It summarizes current knowledge on additive manufacturing within management and business research, and it discusses future research directions in relation to business models for additive manufacturing. Using the scientific database Web of Science, 116 journal articles were identified. The literature review reveals that most research concerns manufacturing optimization. A more holistic view of the changes that additive manufacturing may bring about for firms is needed, as is more research on changed value propositions, and customer/sales-related issues. The article contributes to previous research by systematically summarizing additive manufacturing research in the business and management literature, and by highlighting areas for further investigation related to the business models of individual firms.

Effects of Aging and W Addition on the Corrosion Resistance and Mechanical Properties of Fe-Cr-Mn-N Stainless Steels

International Nuclear Information System (INIS)

Jeon, Yu Taek; Joo, Uk Hyon; Park, Yong Soo; Kim, Young Sik

2000-01-01

The characteristics of the mechanical properties and sensitization behaviors in Fe-Cr-Mn stainless steels by W addition and aging treatment were studied. Yield strength, tensile strength, elongation and impact energy decreased, and hardness increased slightly by aging treatment. W-containing alloys showed especially a larger degree of brittle characteristics due to the hard chi(χ) phase formed from the decomposition of ferrite. Carbides precipitated in grain boundary had a bad effect on impact energy rather than on strength and hardness. Ni addition suppressed the formation of ferrite and resulted in some improvement of mechanical properties. Anodic polarization tests showed that the corrosion resistance of aged alloys decreased by the formation of carbides and secondary austenite. It was observed that W addition made no improvement of the pitting potential and passive current density of aged alloys in the HCI solution. But Ni and W decreased critical current density in the sulfuric acid and made easier formation of passive film, contributing to corrosion resistance. From the results of EPR (Electrochemical Potentiokinetic Reactivation). DOS (Degree of Sensitization) increased with aging time and carbides and ferrite were preferentially attacked. It was observed that Ni delayed the sensitization. It can be concluded from the previous results that the selective dissolution of ferrite is due to the ferrite decomposition to chi (χ) phase and secondary austenite. In the secondary austenite. Cr and W which are known to improve the corrosion resistance were depleted. Therefore, it seems that ferrite phase became sensitive to corrosion

Analysis of the hypothermia of aqueous solutions with different additives and mixing ratios; Analyse der Unterkuehlung von waessrigen Loesungen mit verschiedenen Additiven und Mischverhaeltnissen

Energy Technology Data Exchange (ETDEWEB)

Prosi, Nicolai [Hochschule Karlsruhe - Technik und Wirtschaft (Germany); Eikevik, Trygve M. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Energy and Process Engineering; Hafner, Armin [SINTEF Energy Research, Trondheim (Norway). Energy Efficiency

2012-07-01

The mixture of water, additive and ice particles generally is referred to as slush. As a refrigerant, compared to single-phase coolants slush ice has many advantages. Thus, the energy density is up to seven times larger due to the data stored in the phase change latent heat. At the same temperature difference, the heat transfer is of up to 50 % larger in comparison to single-phase heat transfer fluids. Although the number of slush ice plants used worldwide is increasing steadily, the market could not be convinced yet. This is due to the slush ice generation process mainly used in Europe with rotating scraping elements which remove the ice particles resulting on cold heat exchanger surfaces. These are associated with high investment costs, wear and thus a high degree of maintenance. The aim is to develop a slush ice plant without scraping elements and without sticking or formation of ice on the heat transfer surface. The development of the new process slush ice generation is the overall project in which the context of appropriate combination of flow pattern, additive content, ice content, heat transfer surface and temperature difference between heat transfer surface and fluid is investigated. The authors of the contribution under consideration report on the method of measurement as well as first results of the reliable hypothermia with different additives and mixing ratios.

Apparent losses due to domestic water meter under-registration in South Africa

OpenAIRE

Couvelis, FA; van Zyl, JE

2015-01-01

This study investigated the extent of apparent losses due to water meter under-registration in South Africa. This was done by first estimating the under-registration of new meters due to on-site leakage, and then the additional under-registration due to meter aging. The extent and flow distributions of on-site leakage were determined through field studies in Cape Town, Mangaung and Johannesburg, by measuring the flow through new water meters when no legitimate consumption occurred on the prop...

Contributions Of The Root And Tuber Expansion Programme (Rtep ...

African Journals Online (AJOL)

The survey results showed that RTEP contributed to rural livelihood development mainly in terms of increased farm household income, farm input provision , extension contact, additional family/farm assets, food security as well as capacity building/skill training and improved storage/preservation methods. However ...

The contribution of major diagnostic causes to socioeconomic differences in disability retirement.

Science.gov (United States)

Polvinen, Anu; Laaksonen, Mikko; Gould, Raija; Lahelma, Eero; Martikainen, Pekka

2014-07-01

The aim of this study was twofold: to investigate socioeconomic differences in disability retirement (DR) due to major diseases and find out which diseases contribute most to the overall socioeconomic differences in DR. The data were longitudinal register-based (10% sample of Finns) from Statistics Finland. These data included 258 428 participants aged 35-64 years during the follow-up. The participants were employed or unemployed before the follow-up period 1997-2010. Of all participants, 14 303 men and 13 188 women ended up in DR during the follow-up. Socioeconomic status was categorized into upper- and lower-class non-manual employees, manual workers, and self-employed persons. Cox models were used to estimate hazard ratios for DR due to different diseases. Compared to upper-class non-manual employees, DR was especially high for manual workers whose retirement diagnoses included psychoactive substance use, musculoskeletal diseases (MSD), or cardiovascular diseases. Socioeconomic differences in DR were stronger for younger age groups and men versus women. For females and males, the largest part of the excess DR among manual workers compared to upper-class non-manual employees was due to MSD. In the age group 54-64 years, the contribution of MSD to the total excess was >50% among male manual workers and 75% among female manual workers. Excess DR due to mental disorders concerned only 35-54-year-old manual workers (among 23% men and 26% women). The contribution of MSD to the total excess DR among lower socioeconomic groups was large. Prevention of MSD among manual workers would likely reduce socioeconomic differences in DR.

Economic base determination and influence of several variables against contributions percentage of the GDRP in Aceh Besar district

Science.gov (United States)

Andayani, Keumala; Miftahuddin

2018-05-01

The percentage contribution of Gross Regional Domestic Product (GRDP) in Aceh Besar district is influenced by several leading sectors, such as agriculture, building sector, trade, hotel and restaurant sector, transport and communications, financial sector, leasing and business services, and services sector. Based on the use of Location Quotient (LQ) method and multiple regression model, the effect of labor variables and population to Gross Regional Domestic Product by 2000 constant prices for agriculture and trade. For each addition of one workforce in the trading sector, the trade sector contribution will increase by 0.000014157%. Thus, the trade sector contribution will increase by 0.0000013786% in every addition of one soul of the population. Whereas, for every addition of one human resource in the agricultural sector will be reduced by 0.0002%. In other words, for each addition of one soul of the population will reduce the contribution of the agricultural sector by 0.00008611%.

Non-autoclaved aerated concrete with mineral additives

Science.gov (United States)

Il'ina, L. V.; Rakov, M. A.

2016-01-01

We investigated the effect of joint grinding of Portland cement clinker, silica and carbonate components and mineral additives to specific surface of 280 - 300 m2/kg on the properties (strength, average density and thermal conductivity) of non-autoclaved aerated concrete, and the porosity of the hardened cement paste produced from Portland cement clinker with mineral additives. The joint grinding of the Portland cement clinker with silica and carbonate components and mineral additives reduces the energy consumption of non-autoclaved aerated concrete production. The efficiency of mineral additives (diopside, wollastonite) is due to the closeness the composition, the type of chemical bonds, physical and chemical characteristics (specific enthalpy of formation, specific entropy) to anhydrous clinker minerals and their hydration products. Considering the influence of these additions on hydration of clinker minerals and formation of hardened cement paste structure, dispersed wollastonite and diopside should be used as mineral additives. The hardness and, consequently, the elastic modulus of diopside are higher than that of hardened cement paste. As a result, there is a redistribution of stresses in the hardened cement paste interporous partitions and hardening, both the partitions and aerated concrete on the whole. The mineral additives introduction allowed to obtain the non-autoclaved aerated concrete with average density 580 kg/m3, compressive strength of 3.3 MPa and thermal conductivity of 0.131 W/(m.°C).

Award for Distinguished Scientific Contributions: Alice H. Eagly

Science.gov (United States)

American Psychologist, 2009

2009-01-01

Alice H. Eagly, winner of the Award for Distinguished Scientific Contributions, is cited for her work in the field of social psychology, the psychology of gender, and the use of meta-analytic techniques. She envisions a psychology that extends from individual cognitions to societal structures. In addition to the citation, a biography and selected…

Effect of intratympanic dexamethasone, memantine and piracetam on cellular apoptosis due to cisplatin ototoxicity.

Science.gov (United States)

Topdag, M; Iseri, M; Gelenli, E; Yardimoglu, M; Yazir, Y; Ulubil, S A; Topdag, D O; Ustundag, E

2012-11-01

This study aimed to contribute to the literature on the prevention and treatment of ototoxicity due to various drugs and chemicals. This study compared the histological effects of intratympanic dexamethasone, memantine and piracetam on cellular apoptosis due to cisplatin ototoxicity, in 36 rats. Dexamethasone and memantine had significant effects on the stria vascularis, organ of Corti and spiral ganglion (p piracetam decreased the apoptosis rate, this effect was not statistically significant (p > 0.05). Dexamethasone and memantine were found superior to piracetam in reducing apoptosis due to cisplatin ototoxicity. Further studies of this subject are needed, incorporating electron microscopy and auditory brainstem response testing.

Energy-effective Grinding of Inorganic Solids Using Organic Additives.

Science.gov (United States)

Mishra, Ratan K; Weibel, Martin; Müller, Thomas; Heinz, Hendrik; Flatt, Robert J

2017-08-09

We present our research findings related to new formulations of the organic additives (grinding aids) needed for the efficient grinding of inorganic solids. Even though the size reduction phenomena of the inorganic solid particles in a ball mill is purely a physical process, the addition of grinding aids in milling media introduces a complex physicochemical process. In addition to further gain in productivity, the organic additive helps to reduce the energy needed for grinding, which in the case of cement clinker has major environmental implications worldwide. This is primarily due to the tremendous amounts of cement produced and almost 30% of the associated electrical energy is consumed for grinding. In this paper, we examine the question of how to optimize these grinding aids linking molecular insight into their working mechanisms, and also how to design chemical additives of improved performance for industrial comminution.

PM1 and PM2.5 ionic composition and VOCs measurements in two typical apartments in Athens, Greece: investigation of smoking contribution to indoor air concentrations.

Science.gov (United States)

Saraga, Dikaia E; Maggos, Thomas; Helmis, Constantinos G; Michopoulos, John; Bartzis, John G; Vasilakos, Christos

2010-08-01

During the last decades, the air quality of the city of Athens has been quite aggravated. Scientific interest has been focused on health effects caused by both outdoor and indoor air pollution. The purpose of this study was the presentation of results from air quality measurements in two similar typical Athenian apartments in the same suburban area. In addition, smoking contribution is investigated, as it is the main factor which differentiates the two apartments. The results showed that it is the outdoor environment that mainly contributes to the air quality of the non-smokers' house. In the second apartment, PM2.5, PM1, and benzene concentrations were found significantly higher due to smoking activity. In contrast, no clear difference in particulate matter ionic composition between the two areas was observed, although in the smoker's house, ion concentrations were found elevated. This observation amplifies the assumption that in the smoker's apartment, significant outdoor sources' contribution cannot be excluded.

Legal assumptions for private company claim for additional (supplementary payment

Directory of Open Access Journals (Sweden)

Šogorov Stevan

2011-01-01

Full Text Available Subject matter of analyze in this article are legal assumptions which must be met in order to enable private company to call for additional payment. After introductory remarks discussion is focused on existence of provisions regarding additional payment in formation contract, or in shareholders meeting general resolution, as starting point for company's claim. Second assumption is concrete resolution of shareholders meeting which creates individual obligations for additional payments. Third assumption is defined as distinctness regarding sum of payment and due date. Sending of claim by relevant company body is set as fourth legal assumption for realization of company's right to claim additional payments from member of private company.

Continuum contribution to excitonic four-wave mixing due to interaction-induced nonlinearities: A numerical study

Science.gov (United States)

El Sayed, K.; Birkedal, D.; Lyssenko, V. G.; Hvam, J. M.

1997-01-01

We present a theoretical investigation of ultrafast transient four-wave mixing (FWM) of GaAs quantum wells for coherent excitation of excitons and a large number of continuum states. It is shown that in this case the line shape of the FWM signal is drastically altered due to an interaction-induced coupling of the exciton to all the excited continuum states. The signal is dominantly emitted at the spectral position of the exciton and decays, as a function of delay, on a time scale set by the duration of the laser pulse rather than by the intrinsic dephasing time. Nevertheless, the spectral width of the exciton line in the FWM spectrum and in the decay of the time-resolved FWM signal in real time are governed by the intrinsic excitonic dephasing rate. It is shown that for pulse durations of ~ 100 fs (for GaAs quantum wells) this behavior can be explained as the influence of the Coulomb exchange interaction, while for even shorter pulses this behavior is dominantly caused by nonlinear polarization decay.

Thermal diffusivity of alumina-zirconia sintered with niobium additions

International Nuclear Information System (INIS)

Santos, W.N. dos; Paulin Filho, P.I.; Taylor, R.

1994-01-01

The effect of niobium oxide addition on the alumina-zirconia thermal diffusivity was investigated from 100 0 C to 1000 0 C by the laser flash method. It was observed that 4 to 6% addition of niobium oxide increases the thermal diffusivity when samples were sintered at 1450 0 C. This effect was due to elimination of porosity by formation of liquid please above 1420 0 C in the Al 2 O 3 - Nb 2 O 5 system. (author). 7 refs., 3 figs

The effect of additives on properties, performance and emission of biodiesel fuelled compression ignition engine

International Nuclear Information System (INIS)

Rashedul, H.K.; Masjuki, H.H.; Kalam, M.A.; Ashraful, A.M.; Ashrafur Rahman, S.M.; Shahir, S.A.

2014-01-01

Highlights: • Fuel additives significantly improve the quality of biodiesel and its blends. • Fuel additives used to enhance biodiesel properties. • Fuel saving from optimized vehicle performance and economy with the use of additives. • Emission reduction from fuel system cleanliness and combustion optimization. - Abstract: With growing concern over greenhouse gases there is increasing emphasis on reducing CO 2 emissions. Despite engine efficiency improvements plus increased dieselization of the fleet, increasing vehicle numbers results in increasing CO 2 emissions. To reserve this trend the fuel source must be changed to renewable fuels which are CO 2 neutral. As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel is widely accepted as comparable fuel to diesel in diesel engines. This is due to several factors like decreasing the dependence on imported petroleum, reducing global warming, increasing lubricity, and reducing substantially the exhaust emissions from diesel engine. However, there is a major disadvantage in the use of biodiesel as it has lower heating value, higher density and higher viscosity, higher fuel consumption and higher NO X emission, which limits its application. Here fuel additives become essential and indispensable tools not only to minimize these drawbacks but also generate specified products to meet the regional and international standards. Fuel additives can contribute towards fuel economy and emission reduction either directly or indirectly. Their use enable vehicle performance to be maintained at, or near, optimum over the lifetime of the vehicle. A variety of additives are used in automotive biodiesel fuel to meet specification limits and to enhance quality. For example, metal based additives, oxygenated additives, antioxidants, cetane number improvers, lubricity improvers and cold flow improvers are used to meet specifications and quality. This article is a literature review of the effect

Absence from work due to occupational and non-occupational accidents.

Science.gov (United States)

Jørgensen, Kirsten; Laursen, Bjarne

2013-02-01

The aim of the present study was to investigate absence from work in Denmark due to occupational and non-occupational accidents. Since the beginning of the last decade, political focus has been placed on the population's working capacity and the scope of absence due to illness. Absence from work is estimated at between 3% and 6% of working hours in the EU and costs are estimated at approximately 2.5% of GNP. Victims of accidents treated at two emergency departments were interviewed regarding absence for the injured, the family and others. All answers were linked to the hospital information on the injury, so that it was possible to examine the relation between absence and injury type, and cause of the accident. In total, 1,479 injured persons were interviewed. 36% of these reported absence from work by themselves or others. In mean, an injury caused 3.21 days of absence. Based on this the total absence due to injuries in Denmark was estimated to 1,822,000 workdays, corresponding to approximately 6% of the total absence from work due to all types of illness. Non-occupational injuries resulted in more absence than did occupational injuries. Absence due to accidents contributed to a considerable part of the total absence from work, and non-occupational accidents caused more absence than did occupational accidents.

Supersymmetric contribution to the electroweak ρ parameter

International Nuclear Information System (INIS)

Drees, M.; Hagiwara, K.

1990-01-01

Contributions to the electroweak ρ parameter, the ratio of the neutral- and charged-current strengths at zero-momentum transfer, are studied in the minimal extension of the standard model (SM) with softly broken supersymmetry. The effects of the extended Higgs sector, the gaugino-Higgsino sector, the light-squark--slepton sector and that of the stop-sbottom sector are studied separately, and the role of the custodial SU(2) V symmetry in each sector is clarified. The stop-sbottom sector is found to give potentially a most significant contribution to δρ which can double the standard-model contribution from the top-bottom sector, whereas all the remaining sectors contribute to δρ at the level of at most a few x10 -3 . In the supergravity model with radiative electroweak gauge symmetry breaking there are no extra sources of the SU(2) V breaking at the grand unification scale other than those present already in the SM, and the resulting δρ is found to be significantly smaller than in the general case. Constraints on the allowed range of δρ in the supergravity models are given by taking account of existing and prospective experimental mass limits of additional particles at CERN LEP and Sp bar pS and Fermilab Tevatron

Properties of tire rubber with zinc-containing technological additives

Directory of Open Access Journals (Sweden)

S. N. Kayushnikov

2017-01-01

Full Text Available In this paper, we studied the influence of zinc-containing technological additives on partial replacement of zinc oxide and stearic acid on deformation-strength and performance properties of tire elastomeric compositions based on polyisoprene rubber and combination of oil-filled butadiene-styrene and polybutadiene rubbers. It was revealed that partial replacement of zinc oxide and stearic acid with zinc-containing technological additives does not significantly affect the basic physico-mechanical properties of rubbers based on synthetic rubbers of general use. It was determined that the introduction of zinc-containing technological additives SCC2 in combination with zinc oxide in all the studied ratios and SCC3 in combination with zinc oxide in 4: 1 and 3: 1 ratios leads to increase (up to 10.4% of the resistance of these rubbers under the action of temperature-force fields, which is probably due to a more even distribution of polar components of curing system in non-polar elastomeric matrix, as well as the type of cross-links formed during vulcanization under the action of surface-active additives. It has been found that the introduction of zinc-containing additives into the elastomeric compositions based on SRMS-30 ARKM-15 + SRD in combination with zinc oxide leads to increase to 6.3% of wear resistance of rubbers, which may be due to a lower defectiveness of vulcanization structure of these rubbers, concentration of stress centers in the material. For rubbers based on SRI-3, preservation of bond strength of rubber with a textile cord at a sufficiently high level is shown.

Phytoplankton growth response to Asian dust addition in the northwest Pacific Ocean versus the Yellow Sea

Science.gov (United States)

Zhang, Chao; Gao, Huiwang; Yao, Xiaohong; Shi, Zongbo; Shi, Jinhui; Yu, Yang; Meng, Ling; Guo, Xinyu

2018-02-01

In this study, five on-board microcosm experiments were performed in the subtropical gyre, the Kuroshio Extension region of the northwest Pacific Ocean (NWPO), and the Yellow Sea (YS) in order to investigate phytoplankton growth following the addition of artificially modified mineral dust (AM dust) and various nutrients (nitrogen (N), phosphorus (P), iron (Fe), N + P, and N + P + Fe). The two experiments carried out with AM-dust addition in the subtropical gyre showed a maximum chlorophyll a (Chl a) concentration increase of 1.7- and 2.8-fold, while the cell abundance of large-sized phytoplankton ( > 5 µm) showed a 1.8- and 3.9-fold increase, respectively, relative to the controls. However, in the Kuroshio Extension region and the YS, the increases in maximum Chl a and cell abundance of large-sized phytoplankton following AM-dust addition were at most 1.3-fold and 1.7-fold larger than those in the controls, respectively. A net conversion efficiency index (NCEI) newly proposed in this study, size-fractionated Chl a, and the abundance of large-sized phytoplankton were analysed to determine which nutrients contribute to supporting phytoplankton growth. Our results demonstrate that a combination of nutrients, N-P or N + P + Fe, is responsible for phytoplankton growth in the subtropical gyre following AM-dust addition. Single nutrient addition, i.e., N in the Kuroshio Extension region and P or N in the YS, controls the phytoplankton growth following AM-dust addition. In the AM-dust-addition experiments, in which the increased N-P or P was identified to determine phytoplankton growth, the dissolved inorganic P from AM dust (8.6 nmol L-1) was much lower than the theoretically estimated minimum P demand (˜ 20 nmol L-1) for phytoplankton growth. These observations suggest that additional supply augments the bioavailable P stock in incubated seawater with AM-dust addition, most likely due to an enhanced solubility of P from AM dust or the remineralization of the dissolved

Rubber friction: The contribution from the area of real contact.

Science.gov (United States)

Tiwari, A; Miyashita, N; Espallargas, N; Persson, B N J

2018-06-14

There are two contributions to the friction force when a rubber block is sliding on a hard and rough substrate surface, namely, a contribution F ad = τ f A from the area of real contact A and a viscoelastic contribution F visc from the pulsating forces exerted by the substrate asperities on the rubber block. Here we present experimental results obtained at different sliding speeds and temperatures, and we show that the temperature dependency of the shear stress τ f , for temperatures above the rubber glass transition temperature T g , is weaker than that of the bulk viscoelastic modulus. The physical origin of τ f for T > T g is discussed, and we propose that its temperature dependency is determined by the rubber molecule segment mobility at the sliding interface, which is higher than in the bulk because of increased free-volume effect due to the short-wavelength surface roughness. This is consistent with the often observed reduction in the glass transition temperature in nanometer-thick surface layers of glassy polymers. For temperatures T contact regions and the contact area is determined by the rubber penetration hardness. For this case, we propose that the frictional shear stress is due to slip at the interface between the rubber and a transfer film adsorbed on the concrete surface.

Contributions of Work-Related Stress and Emotional Intelligence to Teacher Engagement: Additive and Interactive Effects.

Science.gov (United States)

Mérida-López, Sergio; Extremera, Natalio; Rey, Lourdes

2017-09-29

This study examined the additive and interactive effects of role stress and emotional intelligence for predicting engagement among 288 teachers. Emotional intelligence and engagement were positively associated. Role ambiguity and role conflict showed negative associations with vigor and dedication scores. The interaction of role ambiguity and emotional intelligence was significant in explaining engagement dimensions. Similar results were found considering overall teacher engagement. Emotional intelligence boosted engagement when the levels of role ambiguity were higher. Our findings suggest the need for future research examining the impact of job hindrances on the links between emotional intelligence and teachers' occupational well-being indicators. Finally, the implications for emotional intelligence training in education are discussed.

THE MERGER-TRIGGERED ACTIVE GALACTIC NUCLEUS CONTRIBUTION TO THE ULTRALUMINOUS INFRARED GALAXY POPULATION

International Nuclear Information System (INIS)

Draper, A. R.; Ballantyne, D. R.

2012-01-01

It has long been thought that there is a connection between ultraluminous infrared galaxies (ULIRGs), quasars, and major mergers. Indeed, simulations show that major mergers are capable of triggering massive starbursts and quasars. However, observations by the Herschel Space Observatory suggest that, at least at high redshift, there may not always be a simple causal connection between ULIRGs and mergers. Here, we combine an evolving merger-triggered active galactic nucleus (AGN) luminosity function with a merger-triggered starburst model to calculate the maximum contribution of major mergers to the ULIRG population. We find that major mergers can account for the entire local population of ULIRGs hosting AGNs and ∼25% of the total local ULIRG luminosity density. By z ∼ 1, major mergers can no longer account for the luminosity density of ULIRGs hosting AGNs and contribute ∼<12% of the total ULIRG luminosity density. This drop is likely due to high-redshift galaxies being more gas rich and therefore able to achieve high star formation rates through secular evolution. Additionally, we find that major mergers can account for the local population of warm ULIRGs. This suggests that selecting high-redshift warm ULIRGs will allow for the identification of high-redshift merger-triggered ULIRGs. As major mergers are likely to trigger very highly obscured AGNs, a significant fraction of the high-redshift warm ULIRG population may host Compton thick AGNs.

Additive manufacturing: state-of-the-art and application framework

Directory of Open Access Journals (Sweden)

Vinícius Picanço Rodrigues

2017-09-01

Full Text Available Additive manufacturing encompasses a class of production processes with increasing applications in different areas and supply chains. Due to its flexibility for production in small batches and the versatility of materials and geometries, this technology is recognized as being capable of revolutionizing the production processes as well as changing production strategies that are currently employed. However, there are different technologies under the generic label of additive manufacturing, materials and application areas with different requirements. Given the growing importance of additive manufacturing as a production process, and also considering the need to have a better insight into the potential applications for driving research and development efforts, this article presents a proposal of organization for additive manufacturing applications in seven areas. Additionally, the article provides a panorama of the current development stage of this technology, with a review of its major technological variants. The results presented aim to serve as a basis to support driving initiatives in additive manufacturing in companies, development agencies and research institutions.

Perturbative QCD contributions to inclusive processes

International Nuclear Information System (INIS)

Ritbergen, T. van.

1996-01-01

This thesis treats the calculation of quantum corrections to a number of high energy processes that are measured in current and future accelerator experiments. The main objective of these experiments is to accurately verify the generally accepted theory of electro-weak and strong interactions, known as the Standard model, and to look for possible deviations. Most of the processes that are treated in this thesis are of a type for which the final state of of a highly energetic scattering or decay process is measured inclusively. The higher order quantum corrections discussed in this thesis are due to strong interactions. To the inclusive decay rate of Z 0 bosons into all possible final states consisting of hadrons third order QCD contributions have been obtained. Also in the third order QCD an expansion for the inclusive hadronic decay rate of a τ-lepton was obtained. Then the top-quark-mass effects on the decay channels of a Higgs boson: Higgs→b-quarks and Higgs→gluons, were investigated. Thereafter the calculation of 3-loop contributions to the deep-inelastic lepton-nucleon scattering process is discussed. Finally the 3-loop contributions to the q 2 -dependence of the lower moments ∫ 0 1 x N-1 F(x,q 2 )dx, N=2,4,6,8 of the structure functions F 2 and F L were obtained. (orig./HSI)

Contribution Index Based on Green Building Certification Systems

OpenAIRE

Yuting Sun; Bee Hua Goh

2015-01-01

Green Building Certification Systems (GBCS) are carried out in many countries due to the rising awareness of the importance of sustainability in the building industry. The intention should have motivated participants to construct and operate buildings sustainably, however, there is not yet a method developed to investigate the motivation of the participants. Based on the GBCS, this paper proposes the contribution index as a standard global method to analyze the performance of participants in ...

Contamination Effects Due to Space Environmental Interactions

Science.gov (United States)

Chen, Philip T.; Paquin, Krista C. (Technical Monitor)

2001-01-01

Molecular and particulate contaminants are commonly generated from the orbital spacecraft operations that are under the influence of the space environment. Once generated, these contaminants may attach to the surfaces of the spacecraft or may remain in the vicinity of the spacecraft. In the event these contaminants come to rest on the surfaces of the spacecraft or situated in the line-of-sight of the observation path, they will create various degrees of contamination effect which may cause undesirable effects for normal spacecraft operations, There will be circumstances in which the spacecraft may be subjected to special space environment due to operational conditions. Interactions between contaminants and special space environment may alter or greatly increase the contamination effect due to the synergistic effect. This paper will address the various types of contamination generation on orbit, the general effects of the contamination on spacecraft systems, and the typical impacts on the spacecraft operations due to the contamination effect. In addition, this paper will explain the contamination effect induced by the space environment and will discuss the intensified contamination effect resulting from the synergistic effect with the special space environment.

The Influence of the Fruits Addition on the Quality Characteristics of Yogurt

Directory of Open Access Journals (Sweden)

Zorica Vosgan

2016-10-01

Full Text Available Yogurt is considered a healthy food and by incorporating fruits the flavor and its nutritional value are improved. The objective of this study consists in obtaining and characterization of functional dairy products with added fruits, of yogurt type. The raw material used for obtaining the acid dairy products is cow milk, in which there were incorporated fruits: cherry, bananas and oleaginous fruits (nuts. The evolution in time of the acidity during fermentation is influenced by the addition of fruits, the highest acidity being reported in the cherry yogurt case. The ascorbic acid content of the fruity yogurts almost doubled compared to simple yogurt, the highest content of vitamin C was found in the yogurt with bananas. The amount of fat was higher in the yogurt containing nuts, because of the oleaginous fruits contribution, fact observed also due to a lower amount of whey released, followed by the yogurt with banana and the cherry yogurt, which released more whey. The study results also indicated that fruits have the effect of increasing the number of lactic acid bacteria, especially the cherry yogurt leading to a population of 4.84 ± 0.13 log CFU/ml.

Death from Barotrauma Due to Compressed Air: A Medico-legal Analysis.

Science.gov (United States)

Giugliano, Pasquale; Massoni, Francesco; Crisci, Antonello; Ricci, Serafino

2016-11-01

Lesions of the digestive tract due to barotrauma resulting from compressed air application are not common, are rarely lethal, and largely affect the sigmoid and descending colon. Moreover, their pathogenic mechanism is a topic of discussion because these lesions have multiple characteristics. Here, the authors describe an autoptic case of death from lesions of the ascending and transverse segments, with perforations and bleeding suffusions as well as ischemic areas covered the colonic wall that was extremely thinned, congested, and hemorrhagic, with considerable flattening leading to disappearance of the mucosal folds and with numerous petechial hemorrhages. The pathological framework of lung congestion made it possible to identify the mechanism responsible for this death as depletion of the heart's pumping function, which contributed significantly to the acute respiratory failure due to respiratory distress as well as to reduced mobility of the diaphragm due to intestinal distension. Acute heart failure played an important role in this death. © 2016 American Academy of Forensic Sciences.

Use of additive material to stabilize the soil swelling

Science.gov (United States)

Parsaee, B.; Estabragh, A. R.; Bordbar, A. T.; Eskandari, G. H.

2009-04-01

Change volume increasing of soil, because of increase in its humidity content causes appearing of swelling phenomenon in the soil. This phenomenon has created a lot of damages in the building which is constructed on this kind of soils. Usage the additive materials which stabilize the swelling, has been the subject of many researches. In this research the Potential expansibility of the expansive soils, which were stabilized by additive materials such as Lime, cement and coal ash, was investigated. To get this purpose, by preparing soil samples mixed with upper additive material, changes of potential swelling of stabilized soils were compared. The results revealed that usage of these stabilizing materials caused the decrease in destructive effects due to swelling of soils to some extent. Keywords: swelling, soil stabilizing, additive material, coal ash

Metal-deactivating additives for liquid fuels

Energy Technology Data Exchange (ETDEWEB)

Boneva, M.I. [Institute of Organic Chemistry, Sofia (Bulgaria); Ivanov, S.K.; Kalitchin, Z.D. [SciBulCom, Ltd., Sofia (Bulgaria); Tanielyan, S.K. [Seton Hall Univ., South Orange, NJ (United States); Terebenina, A.; Todorova, O.I. [Institute of Inorganic Chemistry, Sofia (Bulgaria)

1995-05-01

The metal-deactivating and the antioxidant properties of 1-phenyl-3-methylpyrazolone-5 derivatives have been investigated both in the model reaction of low temperature oxidation of ethylbenzene and in gasoline oxidation. The study of the ability of these derivatives to reduce the catalytic effect of copper naphthenate demonstrates that they are promising as metal deactivating additives for light fuels. Some of the pyrazolone compounds appear to be of special interest for the long-term storage of liquid fuels due to their action as multifunctional inhibitors.

Additional guideline for the design of BWR reload patterns

International Nuclear Information System (INIS)

Burte, D.P.

1990-01-01

The problems of the high magnitude of the reactivity worths of control rods/notches and the thermal shocks to fuel due to control rod withdrawals are considered in this paper. These problems are shown to be mitigated if in addition to complying with the traditional guidelines for designing fuel bundles and reload patterns the proposed additional guideline (in the form of the condition that the shape of the K∞ distribution remains constant throughout the cycle) is also complied with. It is argued that application of the additional guideline for operating conditions ensures that the core can operate with a constant power profile throughout the cycle without control rod movement. Fixed (integral or stand-alone) burnable poisons are thought to be useful in this regard. Some comments on how this may be attempted are included. Additional advantages resulting from the additional guideline are discussed. (author)

Response of non-added solutes during nutrient addition experiments in streams

Science.gov (United States)

Rodriguez-Cardona, B.; Wymore, A.; Koenig, L.; Coble, A. A.; McDowell, W. H.

2015-12-01

Nutrient addition experiments, such as Tracer Additions for Spiraling Curve Characterization (TASCC), have become widely popular as a means to study nutrient uptake dynamics in stream ecosystems. However, the impact of these additions on ambient concentrations of non-added solutes is often overlooked. TASCC addition experiments are ideal for assessing interactions among solutes because it allows for the characterization of multiple solute concentrations across a broad range of added nutrient concentrations. TASCC additions also require the addition of a conservative tracer (NaCl) to track changes in conductivity during the experimental manipulation. Despite its use as a conservative tracer, chloride (Cl) and its associated sodium (Na) might change the concentrations of other ions and non-added nutrients through ion exchange or other processes. Similarly, additions of biologically active solutes might change the concentrations of other non-added solutes. These methodological issues in nutrient addition experiments have been poorly addressed in the literature. Here we examine the response of non-added solutes to pulse additions (i.e. TASCC) of NaCl plus nitrate (NO3-), ammonium, and phosphate across biomes including temperate and tropical forests, and arctic taiga. Preliminary results demonstrate that non-added solutes respond to changes in the concentration of these added nutrients. For example, concentrations of dissolved organic nitrogen (DON) in suburban headwater streams of New Hampshire both increase and decrease in response to NO3- additions, apparently due to biotic processes. Similarly, cations such as potassium, magnesium, and calcium also increase during TASCC experiments, likely due to cation exchange processes associated with Na addition. The response of non-added solutes to short-term pulses of added nutrients and tracers needs to be carefully assessed to ensure that nutrient uptake metrics are accurate, and to detect biotic interactions that may

Additive Manufacturing: Unlocking the Evolution of Energy Materials.

Science.gov (United States)

Zhakeyev, Adilet; Wang, Panfeng; Zhang, Li; Shu, Wenmiao; Wang, Huizhi; Xuan, Jin

2017-10-01

The global energy infrastructure is undergoing a drastic transformation towards renewable energy, posing huge challenges on the energy materials research, development and manufacturing. Additive manufacturing has shown its promise to change the way how future energy system can be designed and delivered. It offers capability in manufacturing complex 3D structures, with near-complete design freedom and high sustainability due to minimal use of materials and toxic chemicals. Recent literatures have reported that additive manufacturing could unlock the evolution of energy materials and chemistries with unprecedented performance in the way that could never be achieved by conventional manufacturing techniques. This comprehensive review will fill the gap in communicating on recent breakthroughs in additive manufacturing for energy material and device applications. It will underpin the discoveries on what 3D functional energy structures can be created without design constraints, which bespoke energy materials could be additively manufactured with customised solutions, and how the additively manufactured devices could be integrated into energy systems. This review will also highlight emerging and important applications in energy additive manufacturing, including fuel cells, batteries, hydrogen, solar cell as well as carbon capture and storage.

Recent data concerning contribution of various greenhouse effect gas sources

International Nuclear Information System (INIS)

Lambert, G.

1991-01-01

The greenhouse effect contributes to a +33 degrees C warming of the earth atmosphere (mean temperature of +15 deg C instead of -18 deg C without any greenhouse effect). The roles of water vapour, carbon dioxide and methane in greenhouse effect are discussed; the CH 4 raise seems to be due to rice cultivation and cattle farming; the CO 2 raise is mainly due oil, coal and natural gas burning. Greenhouse gas increase will cause a 2 to 4 deg C increase of the earth mean temperature but the anthropogenous causes will be obviously seen only during the next century

Strain field due to transition metal impurities in Ni and Pd

Indian Academy of Sciences (India)

1 2. 28 1 π. ¯h2r3 2. dH mr5. (44). In eqs (41) to (44), ∆φFE(r), ∆φc(r) and ∆φb(r) are impurity induced changes in the po- tential due to free electron, s–d hybridization and d-bandwidth contributions respectively. 3. Calculations and results. The above formalism is used to calculate the atomic displacements in Ni and Pd dilute.

Independent contributions of the central executive, intelligence, and in-class attentive behavior to developmental change in the strategies used to solve addition problems.

Science.gov (United States)

Geary, David C; Hoard, Mary K; Nugent, Lara

2012-09-01

Children's (N=275) use of retrieval, decomposition (e.g., 7=4+3 and thus 6+7=6+4+3), and counting to solve additional problems was longitudinally assessed from first grade to fourth grade, and intelligence, working memory, and in-class attentive behavior was assessed in one or several grades. The goal was to assess the relation between capacity of the central executive component of working memory, controlling for intelligence and in-class attentive behavior, and grade-related changes in children's use of these strategies. The predictor on intercept effects from multilevel models revealed that children with higher central executive capacity correctly retrieved more facts and used the most sophisticated counting procedure more frequently and accurately than their lower capacity peers at the beginning of first grade, but the predictor on slope effects indicated that this advantage disappeared (retrieval) or declined in importance (counting) from first grade to fourth grade. The predictor on slope effects also revealed that from first grade to fourth grade, children with higher capacity adopted the decomposition strategy more quickly than other children. The results remained robust with controls for children's sex, race, school site, speed of encoding Arabic numerals and articulating number words, and mathematics achievement in kindergarten. The results also revealed that intelligence and in-class attentive behavior independently contributed to children's strategy development. Copyright © 2012 Elsevier Inc. All rights reserved.

Contributions of Work-Related Stress and Emotional Intelligence to Teacher Engagement: Additive and Interactive Effects

Directory of Open Access Journals (Sweden)

Sergio Mérida-López

2017-09-01

Full Text Available This study examined the additive and interactive effects of role stress and emotional intelligence for predicting engagement among 288 teachers. Emotional intelligence and engagement were positively associated. Role ambiguity and role conflict showed negative associations with vigor and dedication scores. The interaction of role ambiguity and emotional intelligence was significant in explaining engagement dimensions. Similar results were found considering overall teacher engagement. Emotional intelligence boosted engagement when the levels of role ambiguity were higher. Our findings suggest the need for future research examining the impact of job hindrances on the links between emotional intelligence and teachers’ occupational well-being indicators. Finally, the implications for emotional intelligence training in education are discussed.

Contributions of Work-Related Stress and Emotional Intelligence to Teacher Engagement: Additive and Interactive Effects

Science.gov (United States)

2017-01-01

This study examined the additive and interactive effects of role stress and emotional intelligence for predicting engagement among 288 teachers. Emotional intelligence and engagement were positively associated. Role ambiguity and role conflict showed negative associations with vigor and dedication scores. The interaction of role ambiguity and emotional intelligence was significant in explaining engagement dimensions. Similar results were found considering overall teacher engagement. Emotional intelligence boosted engagement when the levels of role ambiguity were higher. Our findings suggest the need for future research examining the impact of job hindrances on the links between emotional intelligence and teachers’ occupational well-being indicators. Finally, the implications for emotional intelligence training in education are discussed. PMID:28961218

Neural crest contributions to the lamprey head

Science.gov (United States)

McCauley, David W.; Bronner-Fraser, Marianne

2003-01-01

The neural crest is a vertebrate-specific cell population that contributes to the facial skeleton and other derivatives. We have performed focal DiI injection into the cranial neural tube of the developing lamprey in order to follow the migratory pathways of discrete groups of cells from origin to destination and to compare neural crest migratory pathways in a basal vertebrate to those of gnathostomes. The results show that the general pathways of cranial neural crest migration are conserved throughout the vertebrates, with cells migrating in streams analogous to the mandibular and hyoid streams. Caudal branchial neural crest cells migrate ventrally as a sheet of cells from the hindbrain and super-pharyngeal region of the neural tube and form a cylinder surrounding a core of mesoderm in each pharyngeal arch, similar to that seen in zebrafish and axolotl. In addition to these similarities, we also uncovered important differences. Migration into the presumptive caudal branchial arches of the lamprey involves both rostral and caudal movements of neural crest cells that have not been described in gnathostomes, suggesting that barriers that constrain rostrocaudal movement of cranial neural crest cells may have arisen after the agnathan/gnathostome split. Accordingly, neural crest cells from a single axial level contributed to multiple arches and there was extensive mixing between populations. There was no apparent filling of neural crest derivatives in a ventral-to-dorsal order, as has been observed in higher vertebrates, nor did we find evidence of a neural crest contribution to cranial sensory ganglia. These results suggest that migratory constraints and additional neural crest derivatives arose later in gnathostome evolution.

Effects from additives on deacetylation of chitin

International Nuclear Information System (INIS)

Campana Filho, Sergio P.; Signini, Roberta

2001-01-01

Deacetylation reactions of commercial chitin were carried out in aqueous sodium hydroxide solution at 115 deg C for 6 hours. The effect from additives (sodium borohydride or anthraquinone) and of bubbling inert gas (nitrogen or argon) on the characteristics of deacetylated samples were evaluated. Average degrees of acetylation and intrinsic viscosity were determined by 1 H NMR spectroscopy and capillary viscometry, respectively. X-ray diffraction was employed to evaluate changes in crystallinity and infrared spectroscopy was used to monitor structural changes due to deacetylation. The bubbling of inert gas during the deacetylation reaction resulted in more crystalline samples of chitosan. Deacetylation carried out without any additive produced slightly more deacetylated chitosan but they were severely depolymerized. The depolymerization process was much less important when sodium borohydride was added to the reaction medium but the addition of anthraquinone and the bubbling of nitrogen, or argon, did not have any effect, this suggests that oxygen is not required for depolymerization. (author)

Application of Zeolitic Additives in the Fluid Catalytic Cracking (FCC

Directory of Open Access Journals (Sweden)

A. Nemati Kharat

2013-06-01

Full Text Available Current article describes application of zeolites in fluid catalytic cracking (FCC. The use of several zeolitic additives for the production light olefins and reduction of pollutants is described. Application of zeolites as fluid catalytic cracking (FCC catalysts and additives due to the presence of active acid sites in the zeolite framework  increase the formation of desired cracking products (i.e., olefin and branched products  in the FCC unit.

Due diligence

International Nuclear Information System (INIS)

Sanghera, G.S.

1999-01-01

The Occupational Health and Safety (OHS) Act requires that every employer shall ensure the health and safety of workers in the workplace. Issues regarding the practices at workplaces and how they should reflect the standards of due diligence were discussed. Due diligence was described as being the need for employers to identify hazards in the workplace and to take active steps to prevent workers from potentially dangerous incidents. The paper discussed various aspects of due diligence including policy, training, procedures, measurement and enforcement. The consequences of contravening the OHS Act were also described

Signal enhancement due to high-Z nanofilm electrodes in parallel plate ionization chambers with variable microgaps.

Science.gov (United States)

Brivio, Davide; Sajo, Erno; Zygmanski, Piotr

2017-12-01

We developed a method for measuring signal enhancement produced by high-Z nanofilm electrodes in parallel plate ionization chambers with variable thickness microgaps. We used a laboratory-made variable gap parallel plate ionization chamber with nanofilm electrodes made of aluminum-aluminum (Al-Al) and aluminum-tantalum (Al-Ta). The electrodes were evaporated on 1 mm thick glass substrates. The interelectrode air gap was varied from 3 μm to 1 cm. The gap size was measured using a digital micrometer and it was confirmed by capacitance measurements. The electric field in the chamber was kept between 0.1 kV/cm and 1 kV/cm for all the gap sizes by applying appropriate compensating voltages. The chamber was exposed to 120 kVp X-rays. The current was measured using a commercial data acquisition system with temporal resolution of 600 Hz. In addition, radiation transport simulations were carried out to characterize the dose, D(x), high-energy electron current, J(x), and deposited charge, Q(x), as a function of distance, x, from the electrodes. A deterministic method was selected over Monte Carlo due to its ability to produce results with 10 nm spatial resolution without stochastic uncertainties. Experimental signal enhancement ratio, SER(G) which we defined as the ratio of signal for Al-air-Ta to signal for Al-air-Al for each gap size, was compared to computations. The individual contributions of dose, electron current, and charge deposition to the signal enhancement were determined. Experimental signals matched computed data for all gap sizes after accounting for several contributions to the signal: (a) charge carrier generated via ionization due to the energy deposited in the air gap, D(x); (b) high-energy electron current, J(x), leaking from high-Z electrode (Ta) toward low-Z electrode (Al); (c) deposited charge in the air gap, Q(x); and (d) the decreased collection efficiency for large gaps (>~500 μm). Q(x) accounts for the electrons below 100 eV, which are

Influence of boron addition on the grain refinement and mechanical properties of AZ91 Mg alloy

International Nuclear Information System (INIS)

Suresh, M.; Srinivasan, A.; Ravi, K.R.; Pillai, U.T.S.; Pai, B.C.

2009-01-01

This article reports the effect of boron addition on the grain refinement efficiency and mechanical properties of AZ91 magnesium alloy. The results show that the addition of boron in the form of Al-4B master alloy, significantly refines the grain size of AZ91 alloy. This refinement is due to the presence of AlB 2 particles, which act as potential nucleants for Mg grains. Improved mechanical properties are obtained with the addition of boron due to the finer grains.

Contribution of Cultural Eutrophication to Marsh Loss in Jamaica Bay (NY)

Science.gov (United States)

Loss of salt marsh area in the Jamaica Bay Estuary (NY) has accelerated in recent years, with loss rates as high as 45 acres per year. A contributing factor to this acceleration is likely cultural eutrophication due to over 6 decades of sewage effluent inputs. We examined marsh...

Multiple nucleobase transporters contribute to boscalid sensitivity in Aspergillus nidulans.

Science.gov (United States)

Kalampokis, Ioannis F; Kapetanakis, George C; Aliferis, Konstantinos A; Diallinas, George

2018-03-01

The development of fungicide-resistant fungal populations represents a major challenge for the agrochemical and agri-food sectors, which threatens food supply and security. The issue becomes complex for fungi that cause quantitative and qualitative losses due to mycotoxin biosynthesis. Nonetheless, currently, the molecular details underlying fungicide action and fungal resistance mechanisms are partially known. Here, we have investigated whether plasma membrane transporters contribute to specific fungicide uptake in the model fungus Aspergillus nidulans. Independent physiological tests and toxicity screening of selected fungicides provided evidence that the antifungal activity of Succinate Dehydrogenase Inhibitors (SDHIs) is associated with the expression of several nucleobase-related transporters. In particular, it was shown that a strain genetically inactivated in all seven nucleobase-related transporters is resistant to the fungicide boscalid, whereas none of the single null mutants exhibited significant resistance level. By constructing and testing isogenic strains that over-express each one of the seven transporters, we confirmed that five of them, namely, UapC, AzgA, FycB, CntA, and FurA, contribute to boscalid uptake. Additionally, by employing metabolomics we have examined the effect of boscalid on the metabolism of isogenic strains expressing or genetically lacking boscalid-related nucleobase transporters. The results confirmed the involvement of specific nucleobase transporters in fungicide uptake, leading to the discovery of corresponding metabolites-biomarkers. This work is the first report on the involvement of specific transporters in fungicide uptake and toxicity and their impact on fungal metabolism regulation and results might be further exploited towards the deeper understanding of fungal resistance to fungicides. Copyright © 2018 Elsevier Inc. All rights reserved.

Worsened physical condition due to climate change contributes to the increasing hypoxia in Chesapeake Bay.

Science.gov (United States)

Du, Jiabi; Shen, Jian; Park, Kyeong; Wang, Ya Ping; Yu, Xin

2018-07-15

There are increasing concerns about the impact of worsened physical condition on hypoxia in a variety of coastal systems, especially considering the influence of changing climate. In this study, an EOF analysis of the DO data for 1985-2012, a long-term numerical simulation of vertical exchange, and statistical analysis were applied to understand the underlying mechanisms for the variation of DO condition in Chesapeake Bay. Three types of analysis consistently demonstrated that both biological and physical conditions contribute equally to seasonal and interannual variations of the hypoxic condition in Chesapeake Bay. We found the physical condition (vertical exchange+temperature) determines the spatial and seasonal pattern of the hypoxia in Chesapeake Bay. The EOF analysis showed that the first mode, which was highly related to the physical forcings and correlated with the summer hypoxia volume, can be well explained by seasonal and interannual variations of physical variables and biological activities, while the second mode is significantly correlated with the estuarine circulation and river discharge. The weakened vertical exchange and increased water temperature since the 1980s demonstrated a worsened physical condition over the past few decades. Under changing climate (e.g., warming, accelerated sea-level rise, altered precipitation and wind patterns), Chesapeake Bay is likely to experience a worsened physical condition, which will amplify the negative impact of anthropogenic inputs on eutrophication and consequently require more efforts for nutrient reduction to improve the water quality condition in Chesapeake Bay. Copyright © 2018 Elsevier B.V. All rights reserved.

Incipient motion in gravel bed rivers due to energetic turbulent flow events

Science.gov (United States)

Valyrakis, Manousos

2013-04-01

This contribution reviews recent developments and contributions in the field of incipient motion and entrainment of coarse sediment grains due to the action of near bed turbulent flows. Specifically, traditional shear based spatio-temporally averaged concepts and instantaneous stress tensor criteria are contrasted to the newly proposed flow event based impulse and energy criteria. The energy criterion, suggests that only sufficiently energetic turbulent events can remove a particle from its resting position on the bed surface and result on its entrainment downstream. While the impulse and energy criteria are interconnected through the energy-impulse equation, the later appears to be more versatile and appropriate for generalising to sediment transport. These flow event based criteria have a sound physical basis for describing the intermittent character of particle entrainment as inherited by near boundary turbulence at near threshold conditions. These criteria can be derived from fundamental laws of physics such as Newtonian classical mechanics and the Lagrange equations respectively. The energetic events that are capable of performing geomorphic work at the scale of individual particles are shown to follow a power law, meaning that more energetic events (capable of removing larger stones) are expected to occur less frequently. In addition, this paper discusses the role of the coefficient of energy transfer efficiency introduced in the energy equation for particle entrainment. A preliminary investigation from analysis of a series of mobile grain flume experiments illustrates that different signatures of turbulence or sequence of flow structures may have different effectiveness towards particle transport. Characteristic cases of specific energetic flow events and the associated particle response are shown and classified with regard to the time required for complete entrainment. Finally these findings are commented with respect to the implications for sediment

Children's patterns of reasoning about reading and addition concepts.

Science.gov (United States)

Farrington-Flint, Lee; Canobi, Katherine H; Wood, Clare; Faulkner, Dorothy

2010-06-01

Children's reasoning was examined within two educational contexts (word reading and addition) so as to understand the factors that contribute to relational reasoning in the two domains. Sixty-seven 5- to 7-year-olds were given a series of related words to read or single-digit addition items to solve (interspersed with unrelated items). The frequency, accuracy, and response times of children's self-reports on the conceptually related items provided a measure of relational reasoning, while performance on the unrelated addition and reading items provided a measure of procedural skill. The results indicated that the children's ability to use conceptual relations to solve both reading and addition problems enhanced speed and accuracy levels, increased with age, and was related to procedural skill. However, regression analyses revealed that domain-specific competencies can best explain the use of conceptual relations in both reading and addition. Moreover, a cluster analysis revealed that children differ according to the academic domain in which they first apply conceptual relations and these differences are related to individual variation in their procedural skills within these particular domains. These results highlight the developmental significance of relational reasoning in the context of reading and addition and underscore the importance of concept-procedure links in explaining children's literacy and arithmetical development.

Performance and energy systems contributions during upper-body sprint interval exercise.

Science.gov (United States)

Franchini, Emerson; Takito, Monica Yuri; Dal'Molin Kiss, Maria Augusta Peduti

2016-12-01

The main purpose of this study was to investigate the performance and energy systems contribution during four upper-body Wingate tests interspersed by 3-min intervals. Fourteen well-trained male adult Judo athletes voluntarily took part in the present study. These athletes were from state to national level, were in their competitive period, but not engaged in any weight loss procedure. Energy systems contributions were estimated using oxygen uptake and blood lactate measurements. The main results indicated that there was higher glycolytic contribution compared to oxidative ( P creatine phosphate, ATP-PCr) contribution during bout 3 ( P <0.001), lower glycolytic contribution compared to oxidative and ATP-PCr ( P <0.001 for both comparisons) contributions during bout 4 and lower oxidative compared to ATP-PCr during bout 4 ( P =0.040). For the energy system contribution across Wingate bouts, the ATP-PCr contribution during bout 1 was lower than that observed during bout 4 ( P =0.005), and the glycolytic system presented higher percentage contribution in the first bout compared to the third and fourth bouts ( P <0.001 for both comparisons), and higher percentage participation in the second compared to the fourth bout ( P <0.001). These results suggest that absolute oxidative and ATP-PCr participations were kept constant across Wingate tests, but there was an increase in relative participation of ATP-PCr in bout 4 compared to bout 1, probably due to the partial phosphocreatine resynthesis during intervals and to the decreased glycolytic activity.

Due diligence responsibilities of the professional geologist

International Nuclear Information System (INIS)

Hobbs, G.W.

1991-01-01

Whether in the role of independent consultant or company employee, a geologist has certain professional obligations in the evaluation of an oil and gas submittal from a third party. 'Due diligence' is the term used to describe the analysis of an investment opportunity. Due diligence involves a multidisciplinary examination of both the technical and business aspects of a submittal. In addition to the obvious geological considerations, prospect evaluations should include relevant details about the specific technical documentation reviewed, information sources, and how the data were verified. Full disclosure of ownership, technical risks, and negative aspects of the prospect should be included along with the positive elements. After the geological analysis is completed, the economic merits of the prospect should be analyzed, incorporating all lease burdens and terms of participation into the calculations. Estimated exploration, development, and operating costs, together with projected annual production, cash flow, and reserves must be examined as to their reasonableness. Finally, the due diligence review should include a thorough check on the reputation, financial condition, technical and managerial expertise, and prior track record of the operator. Bank, trade, legal, and prior partner references should be contacted. The successful professional geologist in today's competitive world must have multidisciplinary skills. A solid background in geology and geophysics, a basic understanding of the principles of petroleum engineering and economics, and the wits of a private eye are needed for good due diligence work

Acyclic diastereoselection in prochiral radical addition to prochiral olefins.

Science.gov (United States)

Sibi, Mukund P; Rheault, Tara R; Chandramouli, Sithamalli V; Jasperse, Craig P

2002-03-27

The stereochemical preference (syn or anti) when prochiral radicals add to prochiral acceptors is of fundamental interest. The primary focus of this research was to determine which factors influence the relative stereochemistry between the beta and gamma chiral centers when these are formed concurrently. While moderate diastereoselectivity was found for addition of alkyl (6a-d) and alpha-alkoxy radicals (16a-c) (15:1 anti). Steric influence in alkyl radical additions was difficult to evaluate due to decreased reactivity when using bulky reaction partners; however, more reactive alpha-alkoxy radicals, it was found that increasing steric bulk leads to moderate increases in selectivity. In addition, higher selectivity was observed when employing lanthanide Lewis acids whose environment (reactivity) was modified using achiral additives, suggesting a potentially simple means for selectivity enhancements in radical reactions. Overall these results indicate that significant stereoelectronic effects are necessary to achieve high levels of selectivity in prochiral radical additions to prochiral acceptors.

Long-Term Warming Trends in Korea and Contribution of Urbanization: An Updated Assessment

Science.gov (United States)

Park, Bo-Joung; Kim, Yeon-Hee; Min, Seung-Ki; Kim, Maeng-Ki; Choi, Youngeun; Boo, Kyung-On; Shim, Sungbo

2017-10-01

This study conducted an updated analysis of the long-term temperature trends over South Korea and reassessed the contribution of the urbanization effect to the local warming trends. Linear trends were analyzed for three different periods over South Korea in order to consider possible inhomogeneity due to changes in the number of available stations: recent 103 years (1912-2014), 61 years (1954-2014), and 42 years (1973-2014). The local temperature has increased by 1.90°C, 1.35°C, and 0.99°C during the three periods, respectively, which are found 1.4-2.6 times larger than the global land mean trends. The countries located in the northern middle and high latitudes exhibit similar warming trends (about 1.5 times stronger than the global mean), suggesting a weak influence of urbanization on the local warming over South Korea. Urbanization contribution is assessed using two methods. First, results from "city minus rural" methods showed that 30-45% of the local warming trends during recent four decades are likely due to the urbanization effect, depending on station classification methods and analysis periods. Results from an "observation minus reanalysis" method using the Twentieth Century Reanalysis (20CR) data sets (v2 and v2c) indicated about 25-30% contribution of the urbanization effect to the local warming trend during the recent six decades. However, the urbanization contribution was estimated as low as 3-11% when considering the century-long period. Our results confirm large uncertainties in the estimation of urbanization contribution when using shorter-term periods and suggest that the urbanization contribution to the century-long warming trends could be much lower.

Beta dose due to monazite sands of Kerala

International Nuclear Information System (INIS)

Massand, O.P.; Venkataraman, G.; Dhairyawan, M.P.

1977-01-01

The heavy black mineral sands of the sea coast of Kerala in India contain patches of monazite in concentrations varying between 0.5 to 5%. Monazite contains about 9.5% of thorium oxide (ThO 2 ) and 0.35% of uranium oxide (U 3 O 8 ). The high natural background radiation of this area had been a matter of concern and reports on the measured gamma radiation levels have appeared. The dose contribution due to beta rays emitted by the materials in the sand has been calculated using Loevinger's formula. The annual beta dose is of the order of 4200 mrad and 740 mrad at a height of 5 and 200 cm respectively from ground level. (author)

On the Additively Weighted Harary Index of Some Composite Graphs

Directory of Open Access Journals (Sweden)

Behrooz Khosravi

2017-03-01

Full Text Available The Harary index is defined as the sum of reciprocals of distances between all pairs of vertices of a connected graph. The additively weighted Harary index H A ( G is a modification of the Harary index in which the contributions of vertex pairs are weighted by the sum of their degrees. This new invariant was introduced in (Alizadeh, Iranmanesh and Došlić. Additively weighted Harary index of some composite graphs, Discrete Math, 2013 and they posed the following question: What is the behavior of H A ( G when G is a composite graph resulting for example by: splice, link, corona and rooted product? We investigate the additively weighted Harary index for these standard graph products. Then we obtain lower and upper bounds for some of them.

LUT REVEALS AN ALGOL-TYPE ECLIPSING BINARY WITH THREE ADDITIONAL STELLAR COMPANIONS IN A MULTIPLE SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Zhu, L.-Y.; Zhou, X.; Qian, S.-B.; Li, L.-J.; Liao, W.-P.; Tian, X.-M.; Wang, Z.-H. [Yunnan Observatories, Chinese Academy of Sciences (CAS), P.O. Box 110, 650011 Kunming (China); Hu, J.-Y., E-mail: zhuly@ynao.ac.cn [National Astronomical Observatories, Chinese Academy of Sciences, 100012 Beijing (China)

2016-04-15

A complete light curve of the neglected eclipsing binary Algol V548 Cygni in the UV band was obtained with the Lunar-based Ultraviolet Telescope in 2014 May. Photometric solutions are obtained using the Wilson–Devinney method. It is found that solutions with and without third light are quite different. The mass ratio without third light is determined to be q = 0.307, while that derived with third light is q = 0.606. It is shown that V548 Cygni is a semi-detached binary where the secondary component is filling the critical Roche lobe. An analysis of all available eclipse times suggests that there are three cyclic variations in the O–C diagram that are interpreted by the light travel-time effect via the presence of three additional stellar companions. This is in agreement with the presence of a large quantity of third light in the system. The masses of these companions are estimated as m sin i′ ∼ 1.09, 0.20, and 0.52 M{sub ⊙}. They are orbiting the central binary with orbital periods of about 5.5, 23.3, and 69.9 years, i.e., in 1:4:12 resonance orbit. Their orbital separations are about 4.5, 13.2, and 26.4 au, respectively. Our photometric solutions suggest that they contribute about 32.4% to the total light of the multiple system. No obvious long-term changes in the orbital period were found, indicating that the contributions of the mass transfer and the mass loss due to magnetic braking to the period variations are comparable. The detection of three possible additional stellar components orbiting a typical Algol in a multiple system make V548 Cygni a very interesting binary to study in the future.

Reduction of thermal quenching of biotite mineral due to annealing

International Nuclear Information System (INIS)

Kalita, J.M.; Wary, G.

2014-01-01

Graphical abstract: - Highlights: • Thermoluminescence of X-ray irradiate biotite was studied at various heating rates. • Thermal quenching was found to decrease with increase in annealing temperature. • Due to annealing one trap level was vanished and a new shallow trap level generated. • The new trap level contributes low thermally quenched thermoluminescence signal. - Abstract: Thermoluminescence (TL) of X-ray irradiated natural biotite annealed at 473, 573, 673 and 773 K were studied within 290–480 K at various linear heating rates (2, 4, 6, 8 and 10 K/s). A Computerized Glow Curve Deconvolution technique was used to study various TL parameters. Thermal quenching was found to be very high for un-annealed sample, however it decreased significantly with increase in annealing temperature. For un-annealed sample thermal quenching activation energy (W) and pre-exponential frequency factor (C) were found to be W = (2.71 ± 0.05) eV and C = (2.38 ± 0.05) × 10 12 s −1 respectively. However for 773 K annealed sample, these parameters were found to be W = (0.63 ± 0.03) eV, C = (1.75 ± 0.27) × 10 14 s −1 . Due to annealing, the initially present trap level at depth 1.04 eV was vanished and a new shallow trap state was generated at depth of 0.78 eV which contributes very low thermally quenched TL signal

How storage and executive functions contribute to children's reading comprehension

NARCIS (Netherlands)

Nouwens, S.; Groen, M.A.; Verhoeven, L.T.W.

2016-01-01

In the current study we investigated the contribution of storage and separate measures of executive functions to reading comprehension in Dutch 5th graders, while controlling for word recognition and vocabulary. In addition we investigated the relationship between this model and working memory as

Mass balance and hydrological contribution of glaciers in northern and central Chile

Science.gov (United States)

MacDonell, Shelley; Vivero, Sebastian; McPhee, James; Ayala, Alvaro; Pellicciotti, Francesca; Campos, Cristian; Caro, Dennys; Ponce, Rodrigo

2016-04-01

Water is a critical resource in the northern and central regions of Chile, as the area supports more than 40% of the country's population, and the regional economy depends on agricultural production and mining, which are two industries that rely heavily on a consistent water supply. Due to relatively low rates of rainfall, meltwater from snow and ice bodies in the highland areas provides a key component of the annual water supply in these areas. Consequently, accurate estimates of the rates of ablation of the cryosphere (i.e. snow and ice) are crucial for predicting current supply rates, and future projections. Whilst snow is generally a larger contributor of freshwater, during periods of drought, glaciers provide a significant source. This study aims to determine the contribution of glaciers to two catchments in northern and central Chile during a 2.5 year period, which largely consisted of extreme dry periods, but also included the recent El Niño event. This study combined field and modelling studies to understand glacier and rock glacier contributions in the Tapado (30°S), Yeso (33°S) catchments. In the field we undertook glaciological mass balance monitoring of three glaciers, monitored albedo and snow line changes using automatic cameras for three glaciers, measured discharge continuously at several points, installed six automatic weather stations and used thermistors to monitor thermal regime changes of two rock glaciers. The combination of these datasets where used to drive energy balance and hydrological models to estimate the contribution of ice bodies to streamflow in the two studied catchments. Over the course of the study all glaciers maintained a negative mass balance, however glaciers in central Chile lost more mass, which is due to the higher melt rates experienced due to lower elevations and higher temperatures. Areas free of debris generally contributed more to streamflow than sediment covered regions, and snow generally contributed more over

Contribution to the study by infrared spectroscopy of addition compounds of boron fluorides and ethers-oxides or organic sulphides; Contribution a l'etude par spectroscopie infrarouge des composes d'addition des fluorures de bore et des ethers-oxydes ou des sulfures organiques

Energy Technology Data Exchange (ETDEWEB)

Le Calve, Jacques

1964-03-09

�{sub s}(BF{sub 3}) ou δ{sub d}(BF{sub 3}). Quant aux vibrations ν(CSC) symetrique ou antisymetrique, elles sont tres peu deplacees lorsqu'on passe d'un sulfure libre au complexe et il n'y a pas lieu d'envisager un couplage avec les vibrations du groupement sBF{sub 3}. Les modifications du spectre des composes R{sub 2} OBF{sub 3} en fonction des conditions physiques nous ont suggere l'hypothese d'un renforcement de la liaison de coordination a l'etat liquide et solide. Les actions intermoleculaires dues a la forte polarite des complexes favoriseraient le transfert electronique de l'atome donneur a l'atome accepteur. Nous avons abouti a des conclusions analogues en comparant les spectres des composes d'addition R{sub 2}SBF{sub 3} en solution dans les sulfures correspondants et a l'etat liquide pur. L'etude des spectres dans la region de 3000 cm{sup -1} nous a permis de mettre en evidence une forte diminution d'intensite et une augmentation de frequence des bandes de valence ν(CH) des ethers ou des sulfures par formation de complexe. Pour les ethers, les perturbations de frequence sont particulierement fortes et l'allure du massif de valence est considerablement modifiee. Selon divers auteurs, il y aurait dans les ethers-oxydes une interaction entre les doublets libres de l'oxygene et les vibrateurs CH en α; la disparition de cette interaction, quand l'un des doublets est engage dans une liaison de coordination, pourrait expliquer nos resultats. Les perturbations plus fortes a l'etat liquide qu'a l'etat gazeux confirment en outre que le transfert electronique de l'oxygene vers le bore augmente sous l'influence des forces intermoleculaires. Enfin, nous avons propose une attribution des bandes de valence ν(CH) des complexes (CH{sub 3}){sub 2}OBF{sub 3}, (C{sub 2}H{sub 5}){sub 2}OBF{sub 3}, et (CH{sub 3}){sub 2}SBF{sub 3}. Les quatre vibrations de balancement des groupements methyle du compose (CH{sub 3}){sub 2}SBF{sub 3} se traduisent dans le spectre infrarouge, en

Additive contributions of two manganese-cored superoxide dismutases (MnSODs to antioxidation, UV tolerance and virulence of Beauveria bassiana.

Directory of Open Access Journals (Sweden)

Xue-Qin Xie

Full Text Available The biocontrol potential of entomopathogenic fungi against arthropod pests depends on not only their virulence to target pests but tolerance to outdoor high temperature and solar UV irradiation. Two Beauveria bassiana superoxide dismutases (SODs, BbSod2 and BbSod3, were characterized as cytosolic and mitochondrial manganese-cored isoenzymes (MnSODs dominating the total SOD activity of the fungal entomopathogen under normal growth conditions. To probe their effects on the biocontrol potential of B. bassiana, ΔBbSod2, ΔBbSod3, and three hairpin RNA-interfered (RNAi mutants with the transcripts of both BbSod2 and BbSod3 being suppressed by 91-97% were constructed and assayed for various phenotypic parameters in conjunction with ΔBbSod2/BbSod2, ΔBbSod3/BbSod3 and wild-type (control strains. In normal cultures, the knockout and RNAi mutants showed significant phenotypic alterations, including delayed sporulation, reduced conidial yields, and impaired conidial quality, but little change in colony morphology. Their mycelia or conidia became much more sensitive to menadione or H(2O(2-induced oxidative stress but had little change in sensitivity to the hyperosmolarity of NaCl and the high temperature of 45°C. Accompanied with the decreased antioxidative capability, conidial tolerances to UV-A and UV-B irradiations were reduced by 16.8% and 45.4% for ΔBbSod2, 18.7% and 44.7% for ΔBbSod3, and ∼33.7% and ∼63.8% for the RNAi mutants, respectively. Their median lethal times (LT(50s against Myzus persicae apterae, which were topically inoculated under a standardized spray, were delayed by 18.8%, 14.5% and 37.1%, respectively. Remarkably, the effects of cytosolic BbSod2 and mitochondrial BbSod3 on the phenotypic parameters important for the fungal bioncontrol potential were additive, well in accordance with the decreased SOD activities and the increased superoxide levels in the knockout and RNAi mutants. Our findings highlight for the first time that

Improve Research Visibility and Impact by Contributing to Wikipedia

OpenAIRE

Ebrahim, Nader Ale

2017-01-01

Wikipedia is a tool for collaboration, information sharing and knowledge/content management which anyone can edit. Wikipedia is widely used by students during the research process. So, due to Wikipedia popularity, contributing to Wikipedia website is one way of increasing citation score. In this workshop, I try to answer “Does including your papers as citations on Wikipedia increase the number of academic citations you get?” if yes, how?.

Can the magnetic moment contribution explain the Ay puzzle?

International Nuclear Information System (INIS)

Stoks, V.G.

1998-01-01

We evaluate the full one-photon-exchange Born amplitude for Nd scattering. We include the contributions due to the magnetic moment of the proton or neutron, and the magnetic moment and quadrupole moment of the deuteron. It is found that the inclusion of the magnetic-moment interaction in the theoretical description of the Nd scattering observables cannot resolve the long-standing A y puzzle. copyright 1998 The American Physical Society

Interim report on the special research project 'exposure to environmental radiation due to nuclear facilities'

International Nuclear Information System (INIS)

1981-03-01

This special research project was started in 1978 as five-year plan. The purposes are to clarify the aspect of radiation exposure in human bodies due to the radioactive substances brought into the environment regarding the utilization of atomic energy, its mechanism and various factors affecting it, and to contribute to the evaluation of exposure dose, the reduction of radiation exposure, the conditions of locating nuclear facilities and the improvement of the method of disposing radioactive wastes. In addition to the fields treated in the previous special research project, the experimental research concerning the metabolism of environmental radioactive nuclides in bodies, namely the problem of the peculiarity of radioactive nuclide kinetics in infants and fetuses different from adults and the possibility of causing the changes in the intake and metabolism of nuclides in foods by the difference in their states of existence, was newly included. Also the research concerning the method of evaluating the absorbed dose in human organs at the time of irradiation outside and inside bodies in a new subject. Accordingly, this special research project is composed of (1) the research concerning the radionuclide kinetics in the environment, (2) the research concerning the radionuclide kinetics in bodies, (3) the research concerning the measurement and evaluation of dose absorbed in internal organs due to environmental radiation, and (4) the research concerning the monitoring of low level environmental radiation. The results obtained so far are reported. (Kako, I.)

Reconceptualising "Identity Slippage": Additional Language Learning and (L2) Identity Development

Science.gov (United States)

Armour, William

2009-01-01

This paper reconsiders the theoretical concept of "identity slippage" by considering a detailed exegesis of three model conversations taught to learners of Japanese as an additional language. To inform my analysis of these conversations and how they contribute to identity slippage, I have used the work of the systemic-functional linguist Jay Lemke…

Perturbative QCD contributions to inclusive processes

Energy Technology Data Exchange (ETDEWEB)

Ritbergen, T. van

1996-09-24

This thesis treats the calculation of quantum corrections to a number of high energy processes that are measured in current and future accelerator experiments. The main objective of these experiments is to accurately verify the generally accepted theory of electro-weak and strong interactions, known as the Standard model, and to look for possible deviations. Most of the processes that are treated in this thesis are of a type for which the final state of of a highly energetic scattering or decay process is measured inclusively. The higher order quantum corrections discussed in this thesis are due to strong interactions. To the inclusive decay rate of Z{sup 0} bosons into all possible final states consisting of hadrons third order QCD contributions have been obtained. Also in the third order QCD an expansion for the inclusive hadronic decay rate of a {tau}-lepton was obtained. Then the top-quark-mass effects on the decay channels of a Higgs boson: Higgs{yields}b-quarks and Higgs{yields}gluons, were investigated. Thereafter the calculation of 3-loop contributions to the deep-inelastic lepton-nucleon scattering process is discussed. Finally the 3-loop contributions to the q{sup 2}-dependence of the lower moments {integral}{sub 0}{sup 1}x{sup N-1}F(x,q{sup 2})dx, N=2,4,6,8 of the structure functions F{sub 2} and F{sub L} were obtained. (orig./HSI).

Additive manufacturing in production: challenges and opportunities

Science.gov (United States)

Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

2015-03-01

Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

Past and future contribution of global groundwater depletion to sea-level rise

NARCIS (Netherlands)

Wada, Y.; Beek, L.P.H. van; Sperna Weiland, F.C.; Chao, B.; Wu, Y.-H.; Bierkens, M.F.P.

2012-01-01

Recent studies suggest the increasing contribution of groundwater depletion to global sea-level rise. Groundwater depletion has more than doubled during the last decades, primarily due to increase in water demand, while the increase in water impoundments behind dams has been tapering off since

Corrections to the rho-parameter due to a heavy Higgs particle

International Nuclear Information System (INIS)

Bij, J.J. van der.

1983-01-01

The main part of this thesis is concerned with the calculation of the two-loop contribution to the rho-parameter, i.e. the ratio of charged and neutral vector boson masses, due to a heavy Higgs particle. It involves the calculation of a large number of Feynman diagrams. The result is that a contribution growing like m 2 exists (m = Higgs mass), but it does not correspond to the poles at n=3 in the non-linear model. First the model is introduced, the precise definition of rho is given and the formal connection with the non-linear model is derived. Then the one-loop infinities are calculated. It is shown that no m 2 corrections are observable in one loop and the log m 2 correction to rho is calculated. Finally the two-loop correction to rho is calculated. (Auth.)

Additive effects in radiation grafting and curing

International Nuclear Information System (INIS)

Viengkhou, V.; Ng, L.

1996-01-01

Full text: Detailed studies on the accelerative effect of novel additives in radiation grafting and curing using acrylated monomer/oligomer systems have been performed in the presence of ionising radiation and UV as sources. Methyl methacrylate (MMA) is used as typical monomer for these grafting studies in the presence of the additives with model backbone polymers, cellulose and propropylene. Additives which have been found to accelerate these grafting processes are: mineral acid, occlusion compounds like urea, thermal initiators and photoinitiators as well as multifunctional monomers such as multifunctional acrylates. The results from irradiation with gamma rays have also been compared with irradiation from a 90W UV lamp. The role of the above additives in accelerating the analogous process of radiation curing has been investigated. Acrylated urethanes, epoxies and polyesters are used as oligomers together with acrylated monomers in this work with uv lamps of 300 watts/inch as radiation source. In the UV curing process bonding between film and substrate is usually due to physical forces. In the present work the presence of additives are shown to influence the occurrence of concurrent grafting during cure thus affecting the nature of the bonding of the cured film. The conditions under which concurrent grafting with UV can occur will be examined. A mechanism for accelerative effect of these additives in both grafting and curing processes has been proposed involving radiation effects and partitioning phenomena

The contribution of microbial biotechnology to mitigating coral reef degradation.

Science.gov (United States)

Damjanovic, Katarina; Blackall, Linda L; Webster, Nicole S; van Oppen, Madeleine J H

2017-09-01

The decline of coral reefs due to anthropogenic disturbances is having devastating impacts on biodiversity and ecosystem services. Here we highlight the potential and challenges of microbial manipulation strategies to enhance coral tolerance to stress and contribute to coral reef restoration and protection. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Dark matter as a dynamic effect due to a non-minimal gravitational coupling with matter (I): Analytical results

International Nuclear Information System (INIS)

Bertolami, O; Paramos, J

2010-01-01

In this work the phenomenology of models possessing a non-minimal coupling between matter and geometry is discussed, with a particular focus on the possibility of describing the flattening of the galactic rotation curves as a dynamically generated effect derived from this modification to General Relativity. Two possibilities are discussed: firstly, that the observed discrepancy between the measured rotation velocity and the classical prediction is due to a deviation from geodesic motion, due to a non-(covariant) conservation of the energy-momentum tensor; secondly, that even if the principle of energy conservation holds, the dynamical effects arising due to the non-trivial terms in the Einstein equations of motion can give rise to an extra density contribution that may be interpreted as dark matter. In this work, The mechanism of the latter alternative is detailed; a numerical session ascertaining the order of magnitude of the relevant parameters is undertaken in another contribution to this volume, with possible cosmological implications discussed.

Inhalation dose due to indoor radon and thoron concentrations in the surrounding villages of Hyderabad, Andhra Pradesh, India

International Nuclear Information System (INIS)

Sreenath Reddy, M.; Sreenivasa Reddy, B.; Yadagiri Reddy, P.; Gopal Reddy, Ch.; Rama Reddy, K.

2006-01-01

Inhalation of radon, thoron and their decay products is the major contribution to the total radioactive dose received by the human population from the natural radiation. The indoor inhalation doses due to radon, thoron and their progenies in the surrounding villages of Hyderabad, India are evaluated. The average inhalation dose due to radon and its progeny is found to be 0.26 ± 0.21 mSv y -1 and due to thoron and its progeny is 0.35 ± 0.38 mSv y -1 . The inhalation dose is also analyzed based on the types of floor, roof and walls of the dwellings and it is found that the dwellings with mud type construction materials have higher inhalation dose. Generally, the contribution of thoron and its progeny to the total dose is neglected but in the present study area the fractional dose of thoron and its progeny is found to be comparable to that of radon and its progeny. (author)

Confidence limits for contribution plots in multivariate statistical process control using bootstrap estimates.

Science.gov (United States)

Babamoradi, Hamid; van den Berg, Frans; Rinnan, Åsmund

2016-02-18

In Multivariate Statistical Process Control, when a fault is expected or detected in the process, contribution plots are essential for operators and optimization engineers in identifying those process variables that were affected by or might be the cause of the fault. The traditional way of interpreting a contribution plot is to examine the largest contributing process variables as the most probable faulty ones. This might result in false readings purely due to the differences in natural variation, measurement uncertainties, etc. It is more reasonable to compare variable contributions for new process runs with historical results achieved under Normal Operating Conditions, where confidence limits for contribution plots estimated from training data are used to judge new production runs. Asymptotic methods cannot provide confidence limits for contribution plots, leaving re-sampling methods as the only option. We suggest bootstrap re-sampling to build confidence limits for all contribution plots in online PCA-based MSPC. The new strategy to estimate CLs is compared to the previously reported CLs for contribution plots. An industrial batch process dataset was used to illustrate the concepts. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of surveillance on the rule of law, due process and the presumption of innocence

NARCIS (Netherlands)

Galetta, Antonella; de Hert, Paul; Wright, D.; Kreissl, R.

2015-01-01

This contribution focuses on the impact of surveillance on the rule of law, due process and the presumption of innocence, key values and principles of a democratic order. It illustrates how they are implemented and enforced in contemporary surveillance societies, while referring to European law and

Contribution of timber exports to economic growth in Nigeria: an ...

African Journals Online (AJOL)

The paper examined the contribution of timber exports to the economic growth in Nigeria, using an econometric approach. Augmented Dickey-Fuller (ADF) and Johansen Co-integration techniques were respectively used to test for unit root and examine the relationship between the variables used. In addition, Granger ...

Evidence for resonance states of lead decaying into two exit channels with counterbalancing contributions

International Nuclear Information System (INIS)

Krause, M.O.; Cerrina, F.; Fahlman, A.; Carlson, T.A.

1983-01-01

The analysis of the electrons emitted in the decay of the 6s 2 6p 2 +hν→6s6p 2 ( 4 P/sub 1/2/)np/sub 3/2/ resonance series of Pb shows that negative contributions occur in the 6p -1 2 P/sub 1/2/ channel and positive contributions in the 6p -1 2 P/sub 3/2/ channel due to interference with the direct photoionization process. These contributions effectively cancel. Hence the series is difficult to observe in absorption, but can easily be delineated in emission

Internal Fiber Structure of a High-Performing, Additively Manufactured Injection Molding Insert

DEFF Research Database (Denmark)

Hofstätter, Thomas; Baier, Sina; Trinderup, Camilla H.

A standard mold is equipped with additively manufactured inserts in a rectangular shape produced with vat photo polymerization. While the lifetime compared to conventional materials such as brass, steel, and aluminum is reduced, the prototyping and design phase can be shortened significantly...... by using flexible and cost-effective additive manufacturing technologies. Higher production volumes still exceed the capability of additively manufactured inserts, which are overruled by the stronger performance of less-flexible but mechanically advanced materials. In this contribution, the internal...... structure of a high-performing, fiber-reinforced injection molding insert has been analyzed. The insert reached a statistically proven and reproducible lifetime of 4,500 shots, which significantly outperforms any other previously published additively manufactured inserts. Computer tomography, tensile tests...

Possible Depolarization Mechanism due to Low Beta Squeeze

International Nuclear Information System (INIS)

Ranjbar, V.; Luccio, A.; Bai, M.

2008-01-01

Simulations reveal a potential depolarization mechanism during low beta squeeze. This depolarization appears to be driven by a spin tune modulation caused by spin precession through the strong low beta quads due to the vertical fields. The modulation of the spin tune introduces an additional snake resonance condition at ν s0 ± nν x - ν z l = integer which while the same numerology as the well known sextupole resonance, can operate in the absence of sextupole elements

Do assortative preferences contribute to assortative mating for adiposity?

Science.gov (United States)

Fisher, Claire I; Fincher, Corey L; Hahn, Amanda C; Little, Anthony C; DeBruine, Lisa M; Jones, Benedict C

2014-01-01

Assortative mating for adiposity, whereby levels of adiposity in romantic partners tend to be positively correlated, has implications for population health due to the combined effects of partners' levels of adiposity on fertility and/or offspring health. Although assortative preferences for cues of adiposity, whereby leaner people are inherently more attracted to leaner individuals, have been proposed as a factor in assortative mating for adiposity, there have been no direct tests of this issue. Because of this, and because of recent work suggesting that facial cues of adiposity convey information about others' health that may be particularly important for mate preferences, we tested the contribution of assortative preferences for facial cues of adiposity to assortative mating for adiposity (assessed from body mass index, BMI) in a sample of romantic couples. Romantic partners' BMIs were positively correlated and this correlation was not due to the effects of age or relationship duration. However, although men and women with leaner partners showed stronger preferences for cues of low levels of adiposity, controlling for these preferences did not weaken the correlation between partners' BMIs. Indeed, own BMI and preferences were uncorrelated. These results suggest that assortative preferences for facial cues of adiposity contribute little (if at all) to assortative mating for adiposity. PMID:24168811

Additive Manufacturing of Metastable Beta Titanium Alloys

Science.gov (United States)

Yannetta, Christopher J.

Additive manufacturing processes of many alloys are known to develop texture during the deposition process due to the rapid reheating and the directionality of the dissipation of heat. Titanium alloys and with respect to this study beta titanium alloys are especially susceptible to these effects. This work examines Ti-20wt%V and Ti-12wt%Mo deposited under normal additive manufacturing process parameters to examine the texture of these beta-stabilized alloys. Both microstructures contained columnar prior beta grains 1-2 mm in length beginning at the substrate with no visible equiaxed grains. This microstructure remained constant in the vanadium system throughout the build. The microstructure of the alloy containing molybdenum changed from a columnar to an equiaxed structure as the build height increased. Eighteen additional samples of the Ti-Mo system were created under different processing parameters to identify what role laser power and travel speed have on the microstructure. There appears to be a correlation in alpha lath size and power density. The two binary alloys were again deposited under the same conditions with the addition of 0.5wt% boron to investigate the effects an insoluble interstitial alloying element would have on the microstructure. The size of the prior beta grains in these two alloys were reduced with the addition of boron by approximately 50 (V) and 100 (Mo) times.

Argentine Population Genetic Structure: Large Variance in Amerindian Contribution

Science.gov (United States)

Seldin, Michael F.; Tian, Chao; Shigeta, Russell; Scherbarth, Hugo R.; Silva, Gabriel; Belmont, John W.; Kittles, Rick; Gamron, Susana; Allevi, Alberto; Palatnik, Simon A.; Alvarellos, Alejandro; Paira, Sergio; Caprarulo, Cesar; Guillerón, Carolina; Catoggio, Luis J.; Prigione, Cristina; Berbotto, Guillermo A.; García, Mercedes A.; Perandones, Carlos E.; Pons-Estel, Bernardo A.; Alarcon-Riquelme, Marta E.

2011-01-01

Argentine population genetic structure was examined using a set of 78 ancestry informative markers (AIMs) to assess the contributions of European, Amerindian, and African ancestry in 94 individuals members of this population. Using the Bayesian clustering algorithm STRUCTURE, the mean European contribution was 78%, the Amerindian contribution was 19.4%, and the African contribution was 2.5%. Similar results were found using weighted least mean square method: European, 80.2%; Amerindian, 18.1%; and African, 1.7%. Consistent with previous studies the current results showed very few individuals (four of 94) with greater than 10% African admixture. Notably, when individual admixture was examined, the Amerindian and European admixture showed a very large variance and individual Amerindian contribution ranged from 1.5 to 84.5% in the 94 individual Argentine subjects. These results indicate that admixture must be considered when clinical epidemiology or case control genetic analyses are studied in this population. Moreover, the current study provides a set of informative SNPs that can be used to ascertain or control for this potentially hidden stratification. In addition, the large variance in admixture proportions in individual Argentine subjects shown by this study suggests that this population is appropriate for future admixture mapping studies. PMID:17177183

A QCD derivation of the additive quark model from two and three gluon exchanges

International Nuclear Information System (INIS)

Lipkin, H.J.

1982-06-01

The contributions to the Pomeron from two and three gluon exchanges are shown to give the correct combinatorial factors for the additive quark model relation between meson and baryon Pomeron couplings, even though two-quark and three-quark operators are involved. Similar results hold for the contributions to hadron masses from three-gluon vertices as well as one-gluon exchange. The color algebra reduces the multiquark couplings to a linear function of quark number. (author)

Temporal variability of antibiotics fluxes in wastewater and contribution from hospitals.

Directory of Open Access Journals (Sweden)

Sylvain Coutu

Full Text Available Significant quantities of antibiotics are used in all parts of the globe to treat diseases with bacterial origins. After ingestion, antibiotics are excreted by the patient and transmitted in due course to the aquatic environment. This study examined temporal fluctuations (monthly time scale in antibiotic sources (ambulatory sales and data from a hospital dispensary for Lausanne, Switzerland. Source variability (i.e., antibiotic consumption, monthly data for 2006-2010 were examined in detail for nine antibiotics--azithromycin, ciprofloxacin, clarithromycin, clindamycin, metronidazole, norfloxacin, ofloxacin, sulfamethoxazole and trimethoprim, from which two main conclusions were reached. First, some substances--azithromycin, clarithromycin, ciprofloxacin--displayed high seasonality in their consumption, with the winter peak being up to three times higher than the summer minimum. This seasonality in consumption resulted in seasonality in Predicted Environmental Concentrations (PECs. In addition, the seasonality in PECs was also influenced by that in the base wastewater flow. Second, the contribution of hospitals to the total load of antibiotics reaching the Lausanne Wastewater Treatment Plant (WTP fluctuated markedly on a monthly time scale, but with no seasonal pattern detected. That is, there was no connection between fluctuations in ambulatory and hospital consumption for the substances investigated.

The Contribution of Callous-Unemotional Traits and Conduct Problems to Bullying in Early Adolescence

Science.gov (United States)

Viding, Essi; Simmonds, Elizabeth; Petrides, K. V.; Frederickson, Norah

2009-01-01

Background: Although a lot is known about the association of conduct problems with bullying, less attention has been paid to co-occurring traits, such as callous-unemotional (CU) traits that might additionally contribute to the risk of engaging in bullying. This study investigated the contribution of CU traits to direct and indirect bullying,…

26 CFR 1.6655-1 - Addition to the tax in the case of a corporation.

Science.gov (United States)

2010-04-01

... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional Amounts, and Assessable... not include for such installment period the Federal income tax return as amended subsequent to the due... fourth installment date = $7,000 (ii) Addition to tax. Assuming that neither the annualized income...

Health hazards due to radon and its daughters

International Nuclear Information System (INIS)

Khan, H.A.; Qureshi, I.E.; Tufail, M.

1993-01-01

The health hazards liked to radon and its daughters have become a matter of great public concern. When inhaled, a fraction of radon is dissolved into the lung fluid, from where it is transported to other parts of the body. The radiation damage is caused to the lungs due to alpha decay of radon during its transit time within the respiratory tract. Radon daughters are found to be even more dangerous than radon itself. These daughters attach themselves to dust particles present in the air. Some of the aerosols so produced enter the lungs and enter the blood stream. It has now been confirmed that radon and its daughters contribute about 70% of the internal dose received by an individual from natural radiation sources. The danger of indoor radon and its daughters is even higher for energy-saving houses and those having poor ventilation systems. This paper briefly describes the health hazards due to radon and its daughters. Different methods employed for the measurement of concentrations of radon and their daughters are described. The experience gained from the nation-wide surveys carried out in different countries is also given. (author). 18 refs, 3 figs, 1 tab

Contribution of Nutrient Pollution to Water Scarcity in the Water-Rich Northeastern United States

Science.gov (United States)

Hale, R. L.; Lopez, C.; Vorosmarty, C. J.

2015-12-01

Most studies of water stress focus on water-scarce regions such as drylands. Yet, even water-rich regions can be water stressed due to local water withdrawals that exceed supply or due to water pollution that makes water unusable. The northeastern United States (NE) is a water-rich region relative to the rest of the country, as it concentrates about 50% of total renewable water of the country. Yes the NE features relatively high water withdrawals, ~50 km3/yr, for thermo-power generation, agriculture, and industry, as well as to support a human population of about 70 million. At the same time, rivers and streams in the NE suffer from nutrient pollution, largely from agricultural and urban land uses. We asked: to what extent is the NE water stressed, and how do water withdrawals and water quality each contribute to water scarcity across the NE? We used information on county-level water withdrawals and runoff to calculate a water scarcity index (WSI) for 200 hydrologic units across the NE from 1987 to 2002. We used data on surface water concentrations of nitrogen to calculate the additional water necessary to dilute surface water pollution to weak, moderate, and strong water quality standards derived from the literature. Only considering withdrawals, we found that approximately 10% of the NE was water stressed. Incorporating a moderate water quality standard, 25% of the NE was water stressed. We calculated a dilution burden by sectors of water users and found that public utilities faced 41% of the total dilution burden for the region, followed by irrigation users at 21%. Our results illustrate that even water rich regions can experience water stress and even scarcity, where withdrawals exceed surface water supplies. Water quality contributes to water stress and can change the spatial patterns of water stress across a region. The common approach to address scarcity has required the use of inter-basin water transfers, or in the case of water quality-caused scarcity

Making health care safer: What is the contribution of health psychology?

Science.gov (United States)

Vincent, Charles; Wearden, Alison; French, David P

2015-11-01

While health care brings great benefits, all treatments, and many investigations, carry some risk. As patients, we should be told of the risks of specific treatments but we are also at risk from failings in the health care system itself. We suggest that, while there are many examples of individual health psychologists who have made important contributions, this has not yet translated into a broader disciplinary engagement. Health psychologists have devoted much more attention to patients and devoted much less attention to the potentially huge impact of studying and intervening with staff, clinical practice, and organizations. We believe that there are considerable opportunities for health psychology to engage more closely with patient safety and, more importantly, that this would be of great benefit to both patients and staff. Statement of contribution What is already known on this subject? While health care brings great benefits, all treatments, and many investigations, carry some risk. Patients are also at risk from failings in the health care system itself. Studies using review of medical records in many countries have found that between 8% and 12% of patients in hospital suffer an unintended harm due to health care. What does this study add? There are many examples of individual psychologists who have made important contributions, but this has not yet translated into a broader disciplinary engagement. There are considerable opportunities for health psychology to engage more closely with patient safety. These include health behaviour change, teamwork, communication after medical error, diagnosis and decision making, organisational culture, and improving compliance with rules and standards. Psychologists providing a clinical service to specialist services in any area could expand their remit from supporting patients to a more general support and engagement with safety and quality initiatives. Health psychologists have models to understand the behaviour of people

Surface mass balance contributions to acceleration of Antarctic ice mass loss during 2003-2013

OpenAIRE

Seo, Ki-Weon; Wilson, Clark R.; Scambos, Ted; Kim, Baek-Min; Waliser, Duane E.; Tian, Baijun; Kim, Byeong-Hoon; Eom, Jooyoung

2015-01-01

Abstract Recent observations from satellite gravimetry (the Gravity Recovery and Climate Experiment (GRACE) mission) suggest an acceleration of ice mass loss from the Antarctic Ice Sheet (AIS). The contribution of surface mass balance changes (due to variable precipitation) is compared with GRACE?derived mass loss acceleration by assessing the estimated contribution of snow mass from meteorological reanalysis data. We find that over much of the continent, the acceleration can be explained by ...

Port Contribution to the Calapan City Development in the Province of Oriental Mindoro, Philippines

Directory of Open Access Journals (Sweden)

Christian Anthony C. Agutaya

2016-11-01

Full Text Available The study assessed the extent of port contribution to the Calapan City development in the province of Oriental Mindoro, Philippines. It used descriptive research designed and involved 20 arrastre and PPA personnel, 5 ship managers, 10 truckers and 15 passengers who were purposively selected, came from Calapan City, represented significant contribution specifically using the port and could give knowledgeable information on port activities. It also utilized open-ended questionnaire and unstructured interviews. The study found out that Calapan City Port contributed to the development of the city in terms of agriculture and trade and industry to a very high extent. However, Calapan Port only contributed to the development of Calapan City in terms of tourism, education, health finance and power/energy and telecommunication only to a high extent. An accounted data on inbound and outbound of products, commodities and people who make use of the port for socio-economic functions should be presented with due concern to the city government of Calapan so that a combined effort for further improvements of key areas should be undertaken jointly by Philippines Port Authority and the city's concerned agencies. A further and deeper study with due consideration of other Philippines Port Authority (PPA - managed ports in Oriental Mindoro which cover various variables as contributions of local government units to port development, needed services by port users and PPA's organizational climate and culture should be undertaken by future researchers.

Non-additive dissipation in open quantum networks out of equilibrium

Science.gov (United States)

Mitchison, Mark T.; Plenio, Martin B.

2018-03-01

We theoretically study a simple non-equilibrium quantum network whose dynamics can be expressed and exactly solved in terms of a time-local master equation. Specifically, we consider a pair of coupled fermionic modes, each one locally exchanging energy and particles with an independent, macroscopic thermal reservoir. We show that the generator of the asymptotic master equation is not additive, i.e. it cannot be expressed as a sum of contributions describing the action of each reservoir alone. Instead, we identify an additional interference term that generates coherences in the energy eigenbasis, associated with the current of conserved particles flowing in the steady state. Notably, non-additivity arises even for wide-band reservoirs coupled arbitrarily weakly to the system. Our results shed light on the non-trivial interplay between multiple thermal noise sources in modular open quantum systems.

75 FR 2068 - Definition of “Plan Assets”-Participant Contributions

Science.gov (United States)

2010-01-14

... permitted to pre-fund contributions. The commenter indicated that an employer may wish to deposit the... would allow most employers with small plans to take advantage of the safe harbor and, thereby, benefit... should be balanced against any additional income and security the plan and plan participants would...

Additive Manufacturing of Biomaterials, Tissues, and Organs.

Science.gov (United States)

Zadpoor, Amir A; Malda, Jos

2017-01-01

The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further development of patient-specific healthcare solutions. Customization of many healthcare products and services, such as implants, drug delivery devices, medical instruments, prosthetics, and in vitro models, would have been extremely challenging-if not impossible-without AM technologies. The current special issue of the Annals of Biomedical Engineering presents the latest trends in application of AM techniques to healthcare-related areas of research. As a prelude to this special issue, we review here the most important areas of biomedical research and clinical practice that have benefited from recent developments in additive manufacturing techniques. This editorial, therefore, aims to sketch the research landscape within which the other contributions of the special issue can be better understood and positioned. In what follows, we briefly review the application of additive manufacturing techniques in studies addressing biomaterials, (re)generation of tissues and organs, disease models, drug delivery systems, implants, medical instruments, prosthetics, orthotics, and AM objects used for medical visualization and communication.

Resonance contribution to electromagnetic structure functions

International Nuclear Information System (INIS)

Bowling, A.L. Jr.

1974-01-01

The part of the pion and proton electromagnetic structure functions due to direct channel resonances in the virtual Compton amplitude is discussed. After a phenomenological discussion, based on the work of Bloom and Gilman, of resonance production in inelastic electroproduction, the single resonance contribution to the pion and proton structure functions is expressed in terms of transition form factors. Froissart-Gribov representations of the Compton amplitude partial waves are presented and are used to specify the spin dependence of the transition form factors. The dependence of the form factors on momentum transfer and resonance mass is assumed on the basis of the behavior of exclusive resonance electroproduction. The single resonance contributions are summed in the Bjorken limit, and the result exhibits Bjorken scaling. Transverse photons are found to dominate in the Bjorken limit, and the threshold behavior of the resonant part of the structure functions is related to the asymptotic behavior of exclusive form factors at large momentum transfer. The resonant parts of the annihilation structure functions are not in general given by simple analytic continuation in the scaling vari []ble ω' of the electroproduction structure functions. (Diss. Abstr. Int., B)

Advantages and contributions in the balanced scorecard implementation

Directory of Open Access Journals (Sweden)

Patrícia Quesado

2018-02-01

Full Text Available Purpose: In this paper we aim to identify and analyse a set of advantages and contributions derived from the Balanced Scorecard (BSC implementation. Design/methodology/approach: In order to answer the research question, we have carried out a qualitative research based on the exclusively bibliographical review of theoretical / conceptual and empirical works previously done on the subject (systematic review of the literature. Findings: The results allow us to conclude that the BSC is more than a simple performance evaluation system, to become a true strategic management tool able to clarify and translate the mission and organizational strategy, making possible the communication process, the strategic alignment and the organizational learning. Originality/value: The study presents a contribution to the current state of knowledge, since the identification of the advantages and contributions in the BSC introduction and implementation can facilitate its adoption and development in the organizations that intend to implement this tool. In addition, a theoretical basis is provided for subsequent research, evidencing the breadth of research on the topic studied.

Epistemically Virtuous Risk Management: Financial Due Diligence and Uncovering the Madoff Fraud

OpenAIRE

de Bruin, Boudewijn; Luetge, Christoph; Jauernig, Johanna

2014-01-01

The chapter analyses how Bernard Madoff’s Ponzi scheme was uncovered by Harry Markopolos, an employee of Rampart Investment Management, LLC, and the contribution of so-called epistemic virtues to Markopolos’ success. After Rampart had informed the firm about an allegedly highly successful hedge fund run by Madoff, Markopolos used qualitative and quantitative methods from financial due diligence to examine Madoff’s risks, returns and strategy, ultimately to conclude that Madoff was running a l...

Congener-specific egg contribution of polychlorinated biphenyls to nestlings in two passerine species

Energy Technology Data Exchange (ETDEWEB)

Maul, Jonathan D., E-mail: jonathan.maul@tiehh.ttu.ed [Department of Environmental Toxicology, Institute of Environmental and Human Health (TIEHH), Texas Tech University, Lubbock, TX 79409 (United States); Schuler, Lance J. [Fisheries and Illinois Aquaculture Center and Department of Zoology, Southern Illinois University, Carbondale, IL 62901 (United States); Halbrook, Richard S. [Cooperative Wildlife Research Laboratory and Department of Zoology, Southern Illinois University, Carbondale, IL 62901 (United States); Lydy, Michael J. [Fisheries and Illinois Aquaculture Center and Department of Zoology, Southern Illinois University, Carbondale, IL 62901 (United States)

2010-08-15

Quantifying polychlorinated biphenyl (PCB) residues in nestlings of avian species is a common method for assessing trophic transfer and risk at PCB-contaminated sites. The proportion of nestling PCB mass due to maternal transfer is often accounted for by subtracting total PCB mass in eggs from nestlings. However, variation in physicochemical properties and metabolism among congeners may lead to differences between egg contribution based on total PCBs and dioxin-like congeners. We examined congener-specific variation in contribution of PCBs from eggs to nestlings in tree swallows and European starlings. Egg contribution of total PCB mass was 14.3 and 16.2%, respectively, whereas contribution based on dioxin-like congeners was 14.8 and 13.6%, respectively. These data suggest that using total PCB mass in eggs to adjust estimates of PCB accumulation in nestlings may not reflect patterns for dioxin-like congeners, potentially over or under-estimating the risk of toxicity of PCBs. - Congener-specific contribution of PCBs from egg to nestlings was examined.

The Role of Food Additives and Natural Foods Containing Vasoactive Amines in Chronic Idiopathic Urticaria

Directory of Open Access Journals (Sweden)

Fuat Erel

2007-10-01

Full Text Available Most patients with chronic idiopathic urticaria (CIU need long-term treatment but there is little known about the prognosis of CIU. The aim of this study was to evaluate the natural course of CIU and to find out if there are risk factors that predict the prognosis. In this prospective study, we obtained data from patients first diagnosed and treated for CIU between September 2003 and September 2005. This study was included 157 patients with CIU. We observed duration of the disease, effects of food additives and preservatives in CIU. As possible prognostic factors we observed sex, age, atopy, intolerance to food additives and preservatives. Allergic reactions were seen to appear in 37% (n=50 cases due to natural foods, in 36% (n=49 cases due to foods containing additives, and in 27% (n=37 cases due to both natural foods and foods containing additives. For patients with CIU, food colors, sweeteners and preservatives that are added into foods are an important etiological factor. Moreover, histamine and histamine-like endogen pharmacological agents can cause allergic reactions. Hence, these foods should be taken into consideration in etiology especially in patients with CIU, and due to potential etiology, elimination of patients from these foods for a while is a significant step in treatment. [TAF Prev Med Bull. 2007; 6(5: 351-356

26 CFR 1.6695-2 - Tax return preparer due diligence requirements for determining earned income credit eligibility.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 13 2010-04-01 2010-04-01 false Tax return preparer due diligence requirements... the Tax, Additional Amounts, and Assessable Penalties § 1.6695-2 Tax return preparer due diligence requirements for determining earned income credit eligibility. (a) Penalty for failure to meet due diligence...

CO2: EDF's competitiveness is due to nuclear power

International Nuclear Information System (INIS)

Anon.

2003-01-01

The CO 2 emissions of EDF group (EDF-France + EDF-energy (UK) + Hidrocantabrico (Spain) + EnBW (Germany)) soared by 53% in 2002 which is due to the purchase of british and spanish electricity sub-companies using fossil energies. Despite this sharp increase EDF remains one of the most competitive electricity companies in Europe concerning greenhouse gas emissions. EDF group is the first electricity company in Europe, it generates 22% of the electricity produced in E.U and contributes to CO 2 emissions with a rate of 101 Kg CO 2 /MWh which 3 times less than the average rate of 20 other European companies (358 Kg CO 2 /MWh). This result is due to the large part of nuclear power in the French energy mix. The best electricity companies as far as CO 2 emissions are concerned are Statkraft (Norway) with 0 Kg CO 2 /MWh (100% hydrology) and British-energy (U.K) with 75 Kg CO 2 /MWh (75% nuclear power). At the other end we have the DEI company (Greece) with 863 Kg CO 2 /MWh (100% lignite). (A.C.)

New two-loop contribution to electric dipole moment in supersymmetric theories

CERN Document Server

Chang, Darwin; Pilaftsis, Apostolos; Chang, Darwin; Keung, Wai-Yee; Pilaftsis, Apostolos

1999-01-01

We calculate a new type of two-loop contributions to the electric dipole moments of the electron and neutron in supersymmetric theories. The new contributions are originated from the potential CP violation in the trilinear couplings of the Higgs bosons to the scalar-top or the scalar-bottom quarks. These couplings were previously very weakly constrained. The electric dipole moments are induced through a mechanism analogous to that due to Barr and Zee. We find observable effects for a sizeable portion of the parameter space related to the third generation scalar-quarks in the minimal supersymmetric standard model which cannot be excluded by earlier considerations.

Cognitive and system factors contributing to diagnostic errors in radiology.

Science.gov (United States)

Lee, Cindy S; Nagy, Paul G; Weaver, Sallie J; Newman-Toker, David E

2013-09-01

In this article, we describe some of the cognitive and system-based sources of detection and interpretation errors in diagnostic radiology and discuss potential approaches to help reduce misdiagnoses. Every radiologist worries about missing a diagnosis or giving a false-positive reading. The retrospective error rate among radiologic examinations is approximately 30%, with real-time errors in daily radiology practice averaging 3-5%. Nearly 75% of all medical malpractice claims against radiologists are related to diagnostic errors. As medical reimbursement trends downward, radiologists attempt to compensate by undertaking additional responsibilities to increase productivity. The increased workload, rising quality expectations, cognitive biases, and poor system factors all contribute to diagnostic errors in radiology. Diagnostic errors are underrecognized and underappreciated in radiology practice. This is due to the inability to obtain reliable national estimates of the impact, the difficulty in evaluating effectiveness of potential interventions, and the poor response to systemwide solutions. Most of our clinical work is executed through type 1 processes to minimize cost, anxiety, and delay; however, type 1 processes are also vulnerable to errors. Instead of trying to completely eliminate cognitive shortcuts that serve us well most of the time, becoming aware of common biases and using metacognitive strategies to mitigate the effects have the potential to create sustainable improvement in diagnostic errors.

Characterization of Starch Edible Films with Different Essential Oils Addition

Directory of Open Access Journals (Sweden)

Šuput Danijela

2016-12-01

Full Text Available This study investigated properties of starch-based edible films with oregano and black cumin essential oil addition. Essential oils addition positively affected film swelling (decreased due to essential oil addition, mechanical properties (tensile strength decreased while elongation at break increased, and water vapor barrier properties (decreased along with essential oils addition. Control film did not have any biological activity, which proves the need for essential oils addition in order to obtain active packaging. Oregano oil was more effective in terms of biological activity. Endothermal peak, above 200°C, represents total thermal degradation of edible films. Diffraction pattern of control film showed significant destruction of A-type crystal structure. Addition of essential oils resulted in peak shape change: diffraction peaks became narrower. Principal Component Analysis has been used to assess the effect of essential oils addition on final starch-based edible films characteristics with the aim to reveal directions for the film characteristics improvement, since the next phase will be optimal film application for food packaging.

Massive ovarian edema, due to adjacent appendicitis.

Science.gov (United States)

Callen, Andrew L; Illangasekare, Tushani; Poder, Liina

2017-04-01

Massive ovarian edema is a benign clinical entity, the imaging findings of which can mimic an adnexal mass or ovarian torsion. In the setting of acute abdominal pain, identifying massive ovarian edema is a key in avoiding potential fertility-threatening surgery in young women. In addition, it is important to consider other contributing pathology when ovarian edema is secondary to another process. We present a case of a young woman presenting with subacute abdominal pain, whose initial workup revealed marked enlarged right ovary. Further imaging, diagnostic tests, and eventually diagnostic laparoscopy revealed that the ovarian enlargement was secondary to subacute appendicitis, rather than a primary adnexal process. We review the classic ultrasound and MRI imaging findings and pitfalls that relate to this diagnosis.

Impact of Diabetic Complications on Balance and Falls: Contribution of the Vestibular System.

Science.gov (United States)

D'Silva, Linda J; Lin, James; Staecker, Hinrich; Whitney, Susan L; Kluding, Patricia M

2016-03-01

Diabetes causes many complications, including retinopathy and peripheral neuropathy, which are well understood as contributing to gait instability and falls. A less understood complication of diabetes is the effect on the vestibular system. The vestibular system contributes significantly to balance in static and dynamic conditions by providing spatially orienting information. It is noteworthy that diabetes has been reported to affect vestibular function in both animal and clinical studies. Pathophysiological changes in peripheral and central vestibular structures due to diabetes have been noted. Vestibular dysfunction is associated with impaired balance and a higher risk of falls. As the prevalence of diabetes increases, so does the potential for falls due to diabetic complications. The purpose of this perspective article is to present evidence on the pathophysiology of diabetes-related complications and their influence on balance and falls, with specific attention to emerging evidence of vestibular dysfunction due to diabetes. Understanding this relationship may be useful for screening (by physical therapists) for possible vestibular dysfunction in people with diabetes and for further developing and testing the efficacy of interventions to reduce falls in this population. © 2016 American Physical Therapy Association.

Structural changes in a copper alloy due to helium implantation

International Nuclear Information System (INIS)

Moreno, D.; Eliezer, D.

1996-01-01

The most suitable nuclear fusion reaction for energy production occurs between the two heavy hydrogen isotopes, deuterium and tritium. Structural materials in fusion reactors will be exposed to helium implantation over a broad range of energies. The deformation and partial exfoliation of surface layers due to hydrogen isotopes and helium contribute to the total erosion of the first wall. For this reason, one of the most important criteria in the choice of materials for the first wall of fusion reactors is the material's damage resistance. Recent advances in developing nuclear fusion reactors reveal that efficient heat removal from plasma-facing components is very important. Copper and copper alloys are considered an attractive choice for transporting such a high heat flux without thermal damage as they have high thermal conductivity. In the present study the authors report on the structural changes in a copper alloy, due to the helium implantation on the very near surface area, observed by transmission electron microscopy

Life Cycle Assessment of Fiber-Reinforced Additive Manufacturing for Injection Molding Insert Production

DEFF Research Database (Denmark)

Hofstätter, Thomas; Stotz, Philippe Maurice; Bey, Niki

2017-01-01

Additively manufactured (AM) injection molding (IM) inserts have proved to be capable to substitute conventionally manufactured metal inserts with polymer-based insert enforced with short, virgin, unseized carbon fibers (CFs). It has been shown that the implementation of AM technology resulted......, this contribution provides a comparison of environmental performance of conventionally vs. additively manufactured inserts in a full life cycle perspective indicated in Figure 1, including materials, production, use and end-of-life (EoL) stages....

Ionic Liquids as Additives of Coffee Bean Oil in Steel-Steel Contacts

Directory of Open Access Journals (Sweden)

James Grace

2015-10-01

Full Text Available Environmental awareness and ever-growing restrictive regulations over contamination have increased the need for more environmentally-friendly lubricants. Due to their superior biodegradability and lower toxicity, vegetable oils are a good alternative to replace currently-used mineral oils. However, vegetable oils show low oxidation and thermal stability and poor anti-wear properties. Most of these drawbacks can be attenuated through the use of additives. In the last decade, ionic liquids have emerged as high-performance fluids and lubricant additives due to their unique characteristics. In this study, the tribological behavior of two phosphonium-based ionic liquids is investigated as additives of coffee bean oil in steel-steel contact. Coffee bean oil-ionic liquid blends containing 1, 2.5, and 5 wt% of each ionic liquid are studied using a block-on-flat reciprocating tribometer and the test results are compared to commercially-available, fully-formulated lubricant. Results showed that the addition of the ionic liquids to the coffee bean oil reduces wear volume of the steel disks, and wear values achieved are comparable to that obtained when the commercially-available lubricant is used.

Contribution of internal exposures to the radiological consequences of the Chernobyl accident.

Science.gov (United States)

Balonov, M I; Anspaugh, L R; Bouville, A; Likhtarev, I A

2007-01-01

The main pathways leading to exposure of members of the general public due to the Chernobyl accident were external exposure from radionuclides deposited on the ground and ingestion of contaminated terrestrial food products. The collective dose to the thyroid was nearly 1.5 million man Gy in Belarus, Russia and Ukraine with nearly half received by children and adolescents. The collective effective dose received in 1986-2005 by approximately five million residents living in the affected areas of the three countries was approximately 50,000 man Sv with approximately 40% from ingestion. That contribution might have been larger if countermeasures had not been applied. The main radionuclide contributing to both external and internal effective dose is 137Cs with smaller contributions of 134Cs and 90Sr and negligible contribution of transuranic elements. The major demonstrated radiation-caused health effect of the Chernobyl accident has been an elevated incidence of thyroid cancer in children.

Employer`s contributions to the training of professional statisticians

Energy Technology Data Exchange (ETDEWEB)

Rustagi, J.S. [Ohio State Univ., Columbus, OH (United States). Statistics Dept.; Wright, T. [Oak Ridge National Lab., TN (United States). Mathematical Sciences Section]|[Bureau of the Census, Washington, DC (United States)

1995-07-01

Statistical science provides important techniques for decision making in a large variety of fields of human endeavor mainly through statistical practice. According to Deming (1965), ``Statistical practice is mostly a collaborative venture between (professional) statisticians and experts in subject-matter (area).`` The professional statistician must be properly trained in areas of statistical science most suited to the discipline in which the applications are made. Due to a large variety of applications. The education of a professional statistician by universities can only be very general. Higher education provides the theoretical basis of statistical science whereas the specific expertise needed by the professional statistician is given by the application areas. In this paper, the authors review the approach of academic programs which are geared towards applications and discuss some of the innovative strategies for preparing statisticians as consultants in industry and business. A survey (census) of statisticians at the national laboratories of the US Department of Energy was made to assess their training by universities and to get a broad view of additional training which has brought them to their present professional status. A particular interest is the extent to which employers have contributed to the training of statisticians. A few recommendations are made which may serve to improve the future training of statisticians for applied collaborative work by universities and employers.

Ergonomics Contribution in Maintainability

Science.gov (United States)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

Flavor singlet contribution to the structure function g1 at small-x

International Nuclear Information System (INIS)

Bartels, J.; Ryskin, M.G.

1996-02-01

The singlet contribution to the g 1 (x, Q 2 ) structure function are calculated in the double-logarithmic approximation of perturbative QCD in the region x s ln 2 (1/x)) k which are not included in the GLAP evolution equations are shown to give a power-like rise at small-x which is much stronger than the extrapolation of the GLAP expressions. The dominant contribution is due to the gluons which, in contrast to the unpolarized case, mix with the fermions also in the region x<<1. The two main reasons why the small-x behavior of the double logarithmic approximation is so much stronger than the usual GLAP evolution are: the larger kinematical region of integration (in particular, no ordering in transverse momentum) and the contributions from non-ladder diagrams. (orig.)

3D printing or additive manufacturing, news and prospect

OpenAIRE

Palau, Julien

2017-01-01

Despite being in use for a relatively long period of time, 3D printing technology, also known as additive manufacturing, is today expanding at a unprecedented pace. The digital explosion, the availability of usable material and the optical impression technology have all contributed to make 3D printing highly useful in the healthcare sector, and most notably in dentistry. The purpose of this thesis is to make a recap statement on this technology. The first part will summarise the different 3D ...

Contributions of plant breeding in Brazil: progress and perspectives

OpenAIRE

Ramalho, Magno Antonio Patto; Dias, Luiz Antônio dos Santos; Carvalho, Bruna Line

2012-01-01

Agribusiness is fundamental for the Brazilian economy. This has become possible due to the use of science and technology in agriculture in the last 35 years. Among the technologies, the use of improved cultivars stands out. This article presents the situation of the species grown in the country in recent years and the contribution of genetic plant breeding to the performance of these species. Challenges multiplied because of populational growth associated with the ever-growing concern of soci...

How are things adding up? Neural differences between arithmetic operations are due to general problem solving strategies.

Science.gov (United States)

Tschentscher, Nadja; Hauk, Olaf

2014-05-15

A number of previous studies have interpreted differences in brain activation between arithmetic operation types (e.g. addition and multiplication) as evidence in favor of distinct cortical representations, processes or neural systems. It is still not clear how differences in general task complexity contribute to these neural differences. Here, we used a mental arithmetic paradigm to disentangle brain areas related to general problem solving from those involved in operation type specific processes (addition versus multiplication). We orthogonally varied operation type and complexity. Importantly, complexity was defined not only based on surface criteria (for example number size), but also on the basis of individual participants' strategy ratings, which were validated in a detailed behavioral analysis. We replicated previously reported operation type effects in our analyses based on surface criteria. However, these effects vanished when controlling for individual strategies. Instead, procedural strategies contrasted with memory retrieval reliably activated fronto-parietal and motor regions, while retrieval strategies activated parietal cortices. This challenges views that operation types rely on partially different neural systems, and suggests that previously reported differences between operation types may have emerged due to invalid measures of complexity. We conclude that mental arithmetic is a powerful paradigm to study brain networks of abstract problem solving, as long as individual participants' strategies are taken into account. Copyright © 2014 Elsevier Inc. All rights reserved.

Collective neutrino-pair emission due to Cooper pairing of protons in superconducting neutron stars

International Nuclear Information System (INIS)

Leinson, L.B.

2001-01-01

The neutrino emission due to formation and breaking of Cooper pairs of protons in superconducting cores of neutron stars is considered with taking into account the electromagnetic coupling of protons to ambient electrons. It is shown that collective response of electrons to the proton quantum transition contributes coherently to the complete interaction with a neutrino field and enhances the neutrino-pair production. Our calculation shows that the contribution of the vector weak current to the ννbar emissivity of protons is much larger than that calculated by different authors without taking into account the plasma effects. Partial contribution of the pairing protons to the total neutrino radiation from the neutron star core is very sensitive to the critical temperatures for the proton and neutron pairing. We show domains of these parameters where the neutrino radiation, caused by a singlet-state pairing of protons is dominating

Influence of additive from sugar beet on white bread quality

Directory of Open Access Journals (Sweden)

Filipović Nada K.

2004-01-01

Full Text Available The additive of acceptable sensory, physical and chemical and microbiological characteristics was made from cossettes. Great water binding capacity related to microcrystals of cellulose qualifies this additive as a desired one in bread making process. Bread was baked in the laboratory and patent flour was used. The additive with particles smaller than 95 (m was supplemented in the quantities of 2, 5 and 10%. The data related to the influence of the quantity of additive on white bread quality point that parallel to increasing the amount of the additive in the dough, yield of dough and bread were also increased. Negative effects are detected as volume depression and inferior bread crumb quality and altered crumb color. The decrease in bread quality is small if 2% of additive was applied, but significant with 5 and 10%. The bread freshness was highly graded 48 hours after baking due to the ability of the additive to retain water. On the whole, bread of superior quality supplemented by 5 and 10% of the additive from sugar beet fiber can be easily made by fortifying flour with gluten and by adding appropriate dough conditioner.

Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite

International Nuclear Information System (INIS)

Dhal, Jharana; Bose, Susmita; Bandyopadhyay, Amit

2013-01-01

Influence of pentavalent tantalum doping in bulk hydroxyapatite (HAp) ceramics has been investigated for polarizability and bioactivity. Phase analysis from X-ray diffraction measurement indicates that increasing dopant concentration decreased the amount of HAp phase and increased β-TCP and/or α-TCP phases during sintering at 1250 °C in a muffle furnace. Results from thermally stimulated depolarization current (TSDC) measurements showed that doping hindered charge storage ability in HAp ceramics, and doped samples stored fewer charge compared to pure HAp. However, doping enhanced wettability of HAp samples, which was improved further due to polarization. In vitro human osteoblast cell–material interaction study revealed an increase in bioactivity due to dopant addition and polarization compared to pure HAp. This increase in bioactivity was attributed to the increase in wettability due to surface charge and dopant addition. - Highlights: • Tantalum doping makes HAp unstable during sintering at 1250 °C and forms TCP. • Tantalum doping reduces charge storage ability of HAp ceramics. • Even with lower charge storage ability tantalum doping improves wettability. • Tantalum doping enhances bioactivity of calcium phosphate based sintered compacts

210Po and 210Pb concentration of cigarettes traded in Hungary and their estimated dose contribution due to smoking

International Nuclear Information System (INIS)

Kovacs, Tibor; Somlai, Janos; Nagy, Katalin; Szeiler, Gabor

2007-01-01

It is known that tobacco leaves may contain 210 Pb and 210 Po in significant concentrations. The cumulative alpha-radiation dose due to the radioactive content of inhaled cigarette smoke and the increasing number of lung cancer cases explain the importance of the investigation. The present study investigated the activity concentrations of these two radionuclides in 29 Hungarian cigarette samples. The relation between 210 Po/ 210 Pb activity and nicotine/tar content of these cigarettes was also examined. 210 Po was determined by alpha spectrometry using a PIPS detector after chemical leaching and spontaneous deposition of 210 Po on a high nickel-content (25%) stainless steel disk. The 210 Pb activity was calculated from the 210 Po originated from the decay of 210 Pb after a waiting period of eight months. The 210 Po activity concentrations of the measured types of cigarettes ranged from 10.0 to 33.5 mBq/cigarette, and the activity of 210 Pb varied from 9.6 to 32.5 mBq/cigarette. The average annual committed effective dose is estimated to be 185.6±70.6μSv/y and 58.7±22.7μSv/y due to cigarette smoking (20 cigarettes/day) for 210 Po and 210 Pb, respectively

HIV prevention policy and programme planning: What can mathematical modelling contribute?

NARCIS (Netherlands)

Hankins, C.A.

2014-01-01

This thesis explores the potential contribution of mathematical modelling to informed decision-making on policy and programme planning for novel HIV prevention tools. Its hypothesis is that, under certain conditions, modelling results can be a useful addition to the evidence and other factors that

Bound-state quark and gluon contributions to structure functions in QCD

International Nuclear Information System (INIS)

Brodsky, S.J.

1991-01-01

One can distinguish two types of contributions to the quark and gluon structure functions of hadrons in quantum chromodynamics: 'intrinsic' contributions, which are due to the direct scattering on the bound-state constituents, and 'extrinsic' contributions, which are derived from particles created in the collision. In this talk, I discuss several aspects of deep inealstic structure functions in which the bound-state structure of the proton plays a crucial role: (1) the properties of the intrinsic gluon distribution associated with the proton bound-state wavefunction; (2) the separation of the quark structure function of the proton into intrinsic 'bound-valence' and extrinsic 'non-valence' components which takes into account the Pauli principle; (3) the properties and identification of intrinsic heavy quark structure functions; and (4) a theory of shadowing and anti-shadowing of nuclear structure functions, directly related to quark-nucleon interactions and the gluon saturation phenomenon. (orig.)

Bound-state quark and gluon contributions to structure functions in QCD

International Nuclear Information System (INIS)

Brodsky, S.J.

1990-08-01

One can distinguish two types of contributions to the quark and gluon structure functions of hadrons in quantum chromodynamics: ''intrinsic'' contributions, which are due to the direct scattering on the bound-state constituents, and ''extrinsic'' contributions, which are derived from particles created in the collision. In this talk, I discussed several aspects of deep inelastic structure functions in which the bound-state structure of the proton plays a crucial role: the properties of the intrinsic gluon distribution associated with the proton bound-state wavefunction; the separation of the quark structure function of the proton onto intrinsic ''bound-valence'' and extrinsic ''non-valence'' components which takes into account the Pauli principle; the properties and identification of intrinsic heavy quark structure functions; and a theory of shadowing and anti-shadowing of nuclear structure functions, directly related to quark-nucleon interactions and the gluon saturation phenomenon. 49 refs., 5 figs

Generalized additive model of air pollution to daily mortality

International Nuclear Information System (INIS)

Kim, J.; Yang, H.E.

2005-01-01

The association of air pollution with daily mortality due to cardiovascular disease, respiratory disease, and old age (65 or older) in Seoul, Korea was investigated in 1999 using daily values of TSP, PM10, O 3 , SO 2 , NO 2 , and CO. Generalized additive Poisson models were applied to allow for the highly flexible fitting of daily trends in air pollution as well as nonlinear association with meteorological variables such as temperature, humidity, and wind speed. To estimate the effect of air pollution and weather on mortality, LOESS smoothing was used in generalized additive models. The findings suggest that air pollution levels affect significantly the daily mortality. (orig.)

Population-specific life histories contribute to metapopulation viability

Science.gov (United States)

Halsey, Samniqueka J.; Bell, Timothy J.; McEachern, A. Kathryn; Pavlovic, Noel B.

2016-01-01

Restoration efforts can be improved by understanding how variations in life-history traits occur within populations of the same species living in different environments. This can be done by first understanding the demographic responses of natural occurring populations. Population viability analysis continues to be useful to species management and conservation with sensitivity analysis aiding in the understanding of population dynamics. In this study, using life-table response experiments and elasticity analyses, we investigated how population-specific life-history demographic responses contributed to the metapopulation viability of the Federally threatened Pitcher's thistle (Cirsium pitcheri). Specifically, we tested the following hypotheses: (1) Subpopulations occupying different environments within a metapopulation have independent demographic responses and (2) advancing succession results in a shift from a demographic response focused on growth and fecundity to one dominated by stasis. Our results showed that reintroductions had a positive contribution to the metapopulation growth rate as compared to native populations which had a negative contribution. We found no difference in succession on the contribution to metapopulation viability. In addition, we identified distinct population-specific contributions to metapopulation viability and were able to associate specific life-history demographic responses. For example, the positive impact of Miller High Dunes population on the metapopulation growth rate resulted from high growth contributions, whereas increased time of plant in stasis for the State Park Big Blowout population resulted in negative contributions. A greater understanding of how separate populations respond in their corresponding environment may ultimately lead to more effective management strategies aimed at reducing extinction risk. We propose the continued use of sensitivity analyses to evaluate population-specific demographic influences on

Complex T Cell Interactions Contribute to Helicobacter pylori Gastritis in Mice

Science.gov (United States)

Gray, Brian M.; Fontaine, Clinton A.; Poe, Sara A.

2013-01-01

Disease due to the gastric pathogen Helicobacter pylori varies in severity from asymptomatic to peptic ulcer disease and cancer. Accumulating evidence suggests that one source of this variation is an abnormal host response. The goal of this study was to use a mouse model of H. pylori gastritis to investigate the roles of regulatory T cells (Treg) as well as proinflammatory T cells (Th1 and Th17) in gastritis, gastric T cell engraftment, and gastric cytokine production. Our results support published data indicating that severe gastritis in T cell recipient mice is due to failure of Treg engraftment, that Treg ameliorate gastritis, and that the proinflammatory response is attributable to interactions between several cell subsets and cytokines. We confirmed that gamma interferon (IFN-γ) is essential for induction of gastritis but showed that IFN-γ-producing CD4 T cells are not necessary. Interleukin 17A (IL-17A) also contributed to gastritis, but to a lesser extent than IFN-γ. Tumor necrosis factor alpha (TNF-α) and IL-17F were also elevated in association with disease. These results indicate that while H. pylori-specific CD4+ T cells and IFN-γ are both essential for induction of gastritis due to H. pylori, IFN-γ production by T cells is not essential. It is likely that other proinflammatory cytokines, such as IL-17F and TNF-α, shown to be elevated in this model, also contribute to the induction of disease. We suggest that gastritis due to H. pylori is associated with loss of immunoregulation and alteration of several cytokines and cell subsets and cannot be attributed to a single immune pathway. PMID:23264048

Value addition - a marketing strategy for MCL

Energy Technology Data Exchange (ETDEWEB)

Sagar, C.K.; Mishra, P.K.; Baranwal, P.K. [Central Mine Planning and Design Institute, Ranchi (India)

2002-07-01

The energy sector will remain dependent on coal because of depletion of oil reserves. With deterioration of power grade coal, the emission of greenhouse gas is going to increase thereby stressing the need of using prepared low ash coal for protection of global environment. Further, recent stipulation of MOEF imposing restriction on use of high ash coal at distant power houses and those at sensitive localities and critically polluted areas have made the aspect of marketing of coal more challenging. This has necessitated a long-term strategy for improving the quality of coal in light of national environment policy. This is more relevant in the present scenario of open market, where we need to market our coal rather simply supplying r.o.m. coal to the linked users. Mahanadi Coalfields, Limited (MCL), the youngest subsidiary of Coal India Limited bestowed with a huge reserve of inferior grade and mainly linked to power sector, is taken as a sample case study. To fulfil the demand of coal with due regard to the national environmental policy, there is need of value addition as strategy of marketing for power coal of MCL. Value addition of coal can be achieved by two distinct different ways i.e. beneficiating high ash coal at pit head or blending high ash coal with low ash coal which is a less preferred option due to non-availability of low ash coal in MCL. 7 refs., 7 tabs.

Distribution of dose rates due to fallout from the Fukushima Daiichi reactor accident

International Nuclear Information System (INIS)

Minato, Susumu

2011-01-01

A number of dose rate data taken after the Fukushima Daiichi reactor accident occurred have been collected through official websites of prefectural governments. Subtracting natural background dose rates from these data, contributions due to fallout alone were evaluated. A train-borne survey was carried out to verify the accuracy of the contour map. The dose rate variation pattern obtained by the survey coincided fairly well with that of the map. (author)

Septic shock in pregnancy due to pyogenic sacroiliitis: a case report

Directory of Open Access Journals (Sweden)

Moros María Lapresta

2009-03-01

Full Text Available Abstract Introduction Lower back pain due to sacroiliac joint dysfunction is a common symptom during pregnancy. However, infection of the sacroiliac joint is rare, even more so if no predisposing factors are present. Case presentation After the onset of unspecific acute pain in the left buttock region, a 31-year-old pregnant woman developed septic shock due to pyogenic sacroiliitis. The medical and obstetric management, treatment applied and patient's experience are described. Conclusion The correct diagnosis and treatment of pyogenic sacroiliitis during pregnancy may avoid joint and bone destruction in addition to maternal and fetal complications.

Years of life lost due to external radiation exposure

International Nuclear Information System (INIS)

Raicevic, J.J.; Merkle, J.M.; Ehrhardt, J.; Ninkovic, M.M.

2002-01-01

A new approach for calculation of the years of life lost per excess death (YLL) due to stochastic health effects is applied to external exposure pathways. The short-term external exposures are due to the passage of radioactive cloud (CL) and due to the skin and clothes contamination (SK). The long-term external exposure is the one from the radioactive material deposited on ground (GR). Three nuclides, 131 I , 137 Cs and 239 Pu with extremely wide range of the half-life are considered to examine its possible influence on the calculated YLL values. For each of these nuclides, the YLL is found as a decreasing function of the age at exposure and presented graphically in this paper. Another negative correlation is established between the fully averaged YLL and the duration of the nuclide's half-life has been found for protracted exposure (GR). On the other hand, the YLL for the short-term external exposures (CL and SK) practically does not depend on the nuclide's half-life. In addition, a weak YLL dependence of the dose was commented. (author)

Implementation and evaluation of PM2.5 source contribution ...

Science.gov (United States)

Source culpability assessments are useful for developing effective emissions control programs. The Integrated Source Apportionment Method (ISAM) has been implemented in the Community Multiscale Air Quality (CMAQ) model to track contributions from source groups and regions to ambient levels and deposited amounts of primary and secondary inorganic PM2.5. Confidence in this approach is established by comparing ISAM source contribution estimates to emissions zero-out simulations recognizing that these approaches are not always expected to provide the same answer. The comparisons are expected to be most similar for more linear processes such as those involving primary emissions of PM2.5 and most different for non-linear systems like ammonium nitrate formation. Primarily emitted PM2.5 (e.g. elemental carbon), sulfur dioxide, ammonia, and nitrogen oxide contribution estimates compare well to zero-out estimates for ambient concentration and deposition. PM2.5 sulfate ion relationships are strong, but nonlinearity is evident and shown to be related to aqueous phase oxidation reactions in the host model. ISAM and zero-out contribution estimates are less strongly related for PM2.5 ammonium nitrate, resulting from instances of non-linear chemistry and negative responses (increases in PM2.5 due to decreases in emissions). ISAM is demonstrated in the context of an annual simulation tracking well characterized emissions source sectors and boundary conditions shows source contri

A Milestone of Aeromedical Research Contributions to Civil Aviation Safety: The 1000th Report in the CARI/OAM Series

National Research Council Canada - National Science Library

Collins, William E; Wade, Katherine

2005-01-01

.... Additional, theme-related sections provide an indication of some of the varied research contributions and safety achievements of the Institute and cite some of the many individuals who contributed...

Systematic classification of civil society contributions to nuclear safeguards

Energy Technology Data Exchange (ETDEWEB)

Kalinowski, Martin B. [Universitaet Hamburg, Carl Friedrich von Weizsaecker, Centre for Science and Peace Research (ZNF) Hamburg (Germany)

2012-06-15

Civil Society is increasingly involved in the policy area of international arms control. Their opportunities are very limited for compliance control in the nuclear nonproliferation regime due to its particular sensitivity. The severe gaps of nuclear safeguards with respect to the capabilities to detect clandestine facilities render marginal civil society contributions highly influential and controversial. More and more data get available for the civil society that can be used to expose potential violations of the NPT. A systematic framework is presented to classify civil society contributions that allows for a systematic study. This classification uses the two parameters (a) affected safeguards stage and (b) degree of integration with the official procedures. These parameters may have the following defined values: (a) The affected safeguards stage can be i. Development and demonstration of new methodologies and technologies ii. Fact finding and data gathering iii. Sharing and publication of data and information iv. Technical analysis of data and information v. Determination of non-compliance vi. Political interpretation (b) The degree of integration can be i. Without a relation ii. Indirect connection iii. Informal interaction iv. Official contribution or mandate. A prominent example for civil society contributions is the increasing availability and capability to acquire and analyze satellite images. An emerging field is environmental sampling, analysis and related atmospheric transport simulation. These and other opportunities are put in the systematic framework to discuss their demonstrated and potential impact. In particular, possible contributions that civil society may offer for improving the detectability of unreported facilities and activities are considered with their chances and risks.

Effect of uncertainty in surface mass balance–elevation feedback on projections of the future sea level contribution of the Greenland ice sheet

Directory of Open Access Journals (Sweden)

T. L. Edwards

2014-01-01

Régional: Fettweis, 2007 climate projections are for 2000–2199, forced by the ECHAM5 and HadCM3 global climate models (GCMs under the SRES A1B emissions scenario. The additional sea level contribution due to the SMB–elevation feedback averaged over five ISM projections for ECHAM5 and three for HadCM3 is 4.3% (best estimate; 95% credibility interval 1.8–6.9% at 2100, and 9.6% (best estimate; 95% credibility interval 3.6–16.0% at 2200. In all results the elevation feedback is significantly positive, amplifying the GrIS sea level contribution relative to the MAR projections in which the ice sheet topography is fixed: the lower bounds of our 95% credibility intervals (CIs for sea level contributions are larger than the "no feedback" case for all ISMs and GCMs. Our method is novel in sea level projections because we propagate three types of modelling uncertainty – GCM and ISM structural uncertainties, and elevation feedback parameterisation uncertainty – along the causal chain, from SRES scenario to sea level, within a coherent experimental design and statistical framework. The relative contributions to uncertainty depend on the timescale of interest. At 2100, the GCM uncertainty is largest, but by 2200 both the ISM and parameterisation uncertainties are larger. We also perform a perturbed parameter ensemble with one ISM to estimate the shape of the projected sea level probability distribution; our results indicate that the probability density is slightly skewed towards higher sea level contributions.

Effect of mineral additives on structure and properties of concrete for pavements

Science.gov (United States)

Sobol, Khrystyna; Markiv, Taras; Hunyak, Oleksii

2017-12-01

Concrete pavements is an attractive alternative to asphalt pavements because of its lower cost and higher durability. Major contribution to sustainable development can be made by partial replacement of cement in concrete pavement with supplementary cementitious materials of different nature and origin. In this paper, the effect of natural zeolite and perlite additives in complex with chemical admixtures on the structure and properties of concrete for pavement was studied. Compressive and flexural strength test was used to study the mechanical behavior of designed concrete under load. Generally, the compressive strength of both control concrete and concrete containing mineral additives levels at the later ages of hardening. The microstructure analysis of concrete with mineral additives of different nature activity showed the formation of additional amount of hydration products such as tobermorite type calcium hydrosilicate which provide self-reinforcement of hardening concrete system.

IR-laser assisted additive freeform optics manufacturing.

Science.gov (United States)

Hong, Zhihan; Liang, Rongguang

2017-08-02

Computer-controlled additive manufacturing (AM) processes, also known as three-dimensional (3D) printing, create 3D objects by the successive adding of a material or materials. While there have been tremendous developments in AM, the 3D printing of optics is lagging due to the limits in materials and tight requirements for optical applicaitons. We propose a new precision additive freeform optics manufacturing (AFOM) method using an pulsed infrared (IR) laser. Compared to ultraviolet (UV) curable materials, thermally curable optical silicones have a number of advantages, such as strong UV stability, non-yellowing, and high transmission, making it particularly suitable for optical applications. Pulsed IR laser radiation offers a distinct advantage in processing optical silicones, as the high peak intensity achieved in the focal region allows for curing the material quickly, while the brief duration of the laser-material interaction creates a negligible heat-affected zone.

The Contribution of Extreme Precipitation to the Total Precipitation in China

Institute of Scientific and Technical Information of China (English)

SUN Jian-Qi

2012-01-01

Using daily precipitation data from weather stations in China, the variations in the contribution of extreme precipitation to the total precipitation are analyzed. It is found that extreme precipitation accounts for approximately one third of the total precipitation based on the overall mean for China. Over the past half century, extreme precipitation has played a dominant role in the year-to-year variability of the total precipitation. On the decadal time scale, the extreme precipitation makes different contributions to the wetting and drying regions of China. The wetting trends of particular regions are mainly attributed to increases in extreme precipitation; in contrast, the drying trends of other regions are mainly due to decreases in non-extreme precipitation.

Stabilized zirconia with cerium and neodymium addition

International Nuclear Information System (INIS)

Andrade, I.M. de; Pessoa, R.C.; Nasar, M.C.; Nasar, R.S.; Rodriques, M.K.C.; Oliveira, J.F.

2006-01-01

Zr 0,9 Ce 0,05 Nd 0,05 O 1,975 system was synthesized with the use of the Pechini method. The polymeric resin was calcined at 350 deg C/3 h and analysed by FTIR that show bands relative to organic. Radicals esther type. The TGA curve indicated the polymeric decomposition occurring from 30 deg C to 740 deg C. DTA analysis show a exothermic peak in 100 deg C due to loss of water of material. From 500 deg C to 800 deg C was observed a intense peak due to polymer decomposition and the zirconia crystallization. The calcined powder from 350 deg C/3 h e 30 min to 900 deg/3 h were analysed by XRD that show the crystalline phase formation with the increase of temperature. The X-ray diffraction pattern show the presence of two phases, such as tetragonal and cubic of zirconia demonstrating that neodymium and cerium additions led to zirconia stabilization. (author)

CULTURAL DUE DILIGENCE IN M&A. IMPORTANCE OF SOFT RISKS FACTORS

Directory of Open Access Journals (Sweden)

Iulian Walter

2017-07-01

Full Text Available During the last decades, the corporate world has witnessed a significant rise in the number of cross border mergers and acquisitions (M&As. In cross border M&As, not only different corporate cultures collide, but also different professional and national cultures. The purpose of Cultural Due Diligence (CDD is to get a coherent image of the intercultural challenges of the M&A in order to be aware of the intercultural risks and opportunities. This article aims to reveal the perception of managers involved in the pre-M&A stage on the soft risks factors that need to be investigated during CDD. This study proposes an appraisal of the most important intercultural issues that need to be considered in M&A. Our contribution to the intercultural aspects of M&A literature consists in improving the current understanding of Cultural Due Diligence content.

CULTURAL DUE DILIGENCE IN M&A. IMPORTANCE OF SOFT RISKS FACTORS

Directory of Open Access Journals (Sweden)

Iulian Warter

2017-06-01

Full Text Available During the last decades, the corporate world has witnessed a significant rise in the number of cross border mergers and acquisitions (M&As. In cross border M&As, not only different corporate cultures collide, but also different professional and national cultures. The purpose of Cultural Due Diligence (CDD is to get a coherent image of the intercultural challenges of the M&A in order to be aware of the intercultural risks and opportunities. This article aims to reveal the perception of managers involved in the pre-M&A stage on the soft risks factors that need to be investigated during CDD. This study proposes an appraisal of the most important intercultural issues that need to be considered in M&A. Our contribution to the intercultural aspects of M&A literature consists in improving the current understanding of Cultural Due Diligence content.

Land subsidence in Yunlin, Taiwan, due to Agricultural and Domestic Water Use

Science.gov (United States)

Hsu, K.; Lin, P.; Lin, Z.

2013-12-01

Subsidence in a layered aquifer is caused by groundwater excess extraction and results in complicated problems in Taiwan. Commonly, responsibility to subsidence for agricultural and domestic water users is difficulty to identify due to the lack of quantitative evidences. An integrated model was proposed to analyze subsidence problem. The flow field utilizes analytical solution for pumping in a layered system from Neuman and Witherspoon (1969) to calculate the head drawdown variation. The subsidence estimation applies Terzaghi (1943) one-dimensional consolidation theory to calculate the deformation in each layer. The proposed model was applied to estimate land subsidence and drawdown variation at the Yuanchang Township of Yunlin County in Taiwan. Groundwater data for dry-season periods were used for calibration and validation. Seasonal effect in groundwater variation was first filtered out. Dry-season pumping effect on land subsidence was analyzed. The results show that multi-layer pumping contributes more in subsidence than single-layer pumping on the response of drawdown and land subsidence in aquifer 2 with a contribution of 97% total change at Yuanchang station. Pumping in aquifer 2 contributes more significant than pumping in aquifer 3 to cause change in drawdown and land subsidence in aquifer 2 with a contribution of 70% total change at Yuanchang station. Larger area of subsidence in Yuanchang Township was attributed pumping at aquifer 2 while pumping at aquifer 3 results in significant subsidence near the well field. The single-layer user contributes most area of subsidence but the multi-layer user generates more serious subsidence.

INTERNAL STRUCTURE OF ASTEROIDS HAVING SURFACE SHEDDING DUE TO ROTATIONAL INSTABILITY

Energy Technology Data Exchange (ETDEWEB)

Hirabayashi, Masatoshi [Research Associate, Colorado Center for Astrodynamics Research, Aerospace Engineering Sciences, University of Colorado Boulder (United States); Sánchez, Diego Paul [Senior Research Associate, Colorado Center for Astrodynamics Research, Aerospace Engineering Sciences, University of Colorado Boulder (United States); Scheeres, Daniel J., E-mail: masatoshi.hirabayashi@colorado.edu [Richard Seebass Chair, Professor, Colorado Center for Astrodynamics Research, Aerospace Engineering Sciences, University of Colorado Boulder (United States)

2015-07-20

Surface shedding of an asteroid is a failure mode where surface materials fly off due to strong centrifugal forces beyond the critical spin period, while the internal structure does not deform significantly. This paper proposes a possible structure of an asteroid interior that leads to surface shedding due to rapid rotation rates. A rubble pile asteroid is modeled as a spheroid composed of a surface shell and a concentric internal core, the entire assembly called the test body. The test body is assumed to be uniformly rotating around a constant rotation axis. We also assume that while the bulk density and the friction angle are constant, the cohesion of the surface shell is different from that of the internal core. First, developing an analytical model based on limit analysis, we provide the upper and lower bounds for the actual surface shedding condition. Second, we use a Soft-sphere Discrete Element Method (SSDEM) to study dynamical deformation of the test body due to a quasi-static spin-up. In this paper we show the consistency of both approaches. Additionally, the SSDEM simulations show that the initial failure always occurs locally and not globally. In addition, as the core becomes larger, the size of lofted components becomes smaller. These results imply that if there is a strong core in a progenitor body, surface shedding is the most likely failure mode.

INTERNAL STRUCTURE OF ASTEROIDS HAVING SURFACE SHEDDING DUE TO ROTATIONAL INSTABILITY

International Nuclear Information System (INIS)

Hirabayashi, Masatoshi; Sánchez, Diego Paul; Scheeres, Daniel J.

2015-01-01

Surface shedding of an asteroid is a failure mode where surface materials fly off due to strong centrifugal forces beyond the critical spin period, while the internal structure does not deform significantly. This paper proposes a possible structure of an asteroid interior that leads to surface shedding due to rapid rotation rates. A rubble pile asteroid is modeled as a spheroid composed of a surface shell and a concentric internal core, the entire assembly called the test body. The test body is assumed to be uniformly rotating around a constant rotation axis. We also assume that while the bulk density and the friction angle are constant, the cohesion of the surface shell is different from that of the internal core. First, developing an analytical model based on limit analysis, we provide the upper and lower bounds for the actual surface shedding condition. Second, we use a Soft-sphere Discrete Element Method (SSDEM) to study dynamical deformation of the test body due to a quasi-static spin-up. In this paper we show the consistency of both approaches. Additionally, the SSDEM simulations show that the initial failure always occurs locally and not globally. In addition, as the core becomes larger, the size of lofted components becomes smaller. These results imply that if there is a strong core in a progenitor body, surface shedding is the most likely failure mode

The contribution of China's emissions to global climate forcing.

Science.gov (United States)

Li, Bengang; Gasser, Thomas; Ciais, Philippe; Piao, Shilong; Tao, Shu; Balkanski, Yves; Hauglustaine, Didier; Boisier, Juan-Pablo; Chen, Zhuo; Huang, Mengtian; Li, Laurent Zhaoxin; Li, Yue; Liu, Hongyan; Liu, Junfeng; Peng, Shushi; Shen, Zehao; Sun, Zhenzhong; Wang, Rong; Wang, Tao; Yin, Guodong; Yin, Yi; Zeng, Hui; Zeng, Zhenzhong; Zhou, Feng

2016-03-17

Knowledge of the contribution that individual countries have made to global radiative forcing is important to the implementation of the agreement on "common but differentiated responsibilities" reached by the United Nations Framework Convention on Climate Change. Over the past three decades, China has experienced rapid economic development, accompanied by increased emission of greenhouse gases, ozone precursors and aerosols, but the magnitude of the associated radiative forcing has remained unclear. Here we use a global coupled biogeochemistry-climate model and a chemistry and transport model to quantify China's present-day contribution to global radiative forcing due to well-mixed greenhouse gases, short-lived atmospheric climate forcers and land-use-induced regional surface albedo changes. We find that China contributes 10% ± 4% of the current global radiative forcing. China's relative contribution to the positive (warming) component of global radiative forcing, mainly induced by well-mixed greenhouse gases and black carbon aerosols, is 12% ± 2%. Its relative contribution to the negative (cooling) component is 15% ± 6%, dominated by the effect of sulfate and nitrate aerosols. China's strongest contributions are 0.16 ± 0.02 watts per square metre for CO2 from fossil fuel burning, 0.13 ± 0.05 watts per square metre for CH4, -0.11 ± 0.05 watts per square metre for sulfate aerosols, and 0.09 ± 0.06 watts per square metre for black carbon aerosols. China's eventual goal of improving air quality will result in changes in radiative forcing in the coming years: a reduction of sulfur dioxide emissions would drive a faster future warming, unless offset by larger reductions of radiative forcing from well-mixed greenhouse gases and black carbon.

Evaluation of absorbed dosis during studies of renal function due AI 123I / 131I (Hippuran) and 111 In (DPTA)

International Nuclear Information System (INIS)

Arteaga, Marcial V.V.; Diestra, Carlos E.C.; Villanueva, Raul A.S.; Alegria, Roberto R.; Salvatierra, Carlos C.; Rosales, Jorge M.; Gonzalez, Denis A.; Cruz, Carlos A.M.

2014-01-01

Using the MIRD methodology and Cristy-Eckerman representation for for adult kidneys, it proves that the dosimetric contributions of bodies of the biokinetics of 123 I / 131 I (Hippuran) and 111 In (DTPA) are significant, in the estimated of dose, during studies of renal function. Dosimetric contributions (whole body and urinary bladder, kidney excluding) are given by 11.90% (for 123 I), 4.97% (for 131 I) and 28.32% (for 111 In). In all cases, the dosimetric contributions are mainly due to photons emitted by the entire body

Molecular genetic contributions to socioeconomic status and intelligence.

Science.gov (United States)

Marioni, Riccardo E; Davies, Gail; Hayward, Caroline; Liewald, Dave; Kerr, Shona M; Campbell, Archie; Luciano, Michelle; Smith, Blair H; Padmanabhan, Sandosh; Hocking, Lynne J; Hastie, Nicholas D; Wright, Alan F; Porteous, David J; Visscher, Peter M; Deary, Ian J

2014-05-01

Education, socioeconomic status, and intelligence are commonly used as predictors of health outcomes, social environment, and mortality. Education and socioeconomic status are typically viewed as environmental variables although both correlate with intelligence, which has a substantial genetic basis. Using data from 6815 unrelated subjects from the Generation Scotland study, we examined the genetic contributions to these variables and their genetic correlations. Subjects underwent genome-wide testing for common single nucleotide polymorphisms (SNPs). DNA-derived heritability estimates and genetic correlations were calculated using the 'Genome-wide Complex Trait Analyses' (GCTA) procedures. 21% of the variation in education, 18% of the variation in socioeconomic status, and 29% of the variation in general cognitive ability was explained by variation in common SNPs (SEs ~ 5%). The SNP-based genetic correlations of education and socioeconomic status with general intelligence were 0.95 (SE 0.13) and 0.26 (0.16), respectively. There are genetic contributions to intelligence and education with near-complete overlap between common additive SNP effects on these traits (genetic correlation ~ 1). Genetic influences on socioeconomic status are also associated with the genetic foundations of intelligence. The results are also compatible with substantial environmental contributions to socioeconomic status.

CUNY Graduate Center Workshops on Combinatorial and Additive Number Theory

CERN Document Server

2017-01-01

Based on talks from the 2015 and 2016 Combinatorial and Additive Number Theory (CANT) workshops at the City University of New York, these proceedings offer 19 peer-reviewed and edited papers on current topics in number theory. Held every year since 2003, the workshop series surveys state-of-the-art open problems in combinatorial and additive number theory and related parts of mathematics. Sumsets, partitions, convex polytopes and discrete geometry, Ramsey theory, primality testing, and cryptography are among the topics featured in this volume. Each contribution is dedicated to a specific topic that reflects the latest results by experts in the field. Researchers and graduate students interested in the current progress in number theory will find this selection of articles relevant and compelling. .

Evaluation of the absorbed dose to the lungs due to Xe133 and Tc99m (MAA)

International Nuclear Information System (INIS)

Vazquez A, M.; Murillo C, F.; Castillo D, C.; Sifuentes D, Y.; Sanchez S, P.; Rojas P, E.; Marquez P, F.

2015-10-01

The absorbed dose in lungs of an adult patient has been evaluated using the biokinetics of radiopharmaceuticals containing Xe 133 or Tc 99m (MAA). The absorbed dose was calculated using the MIRD formalism, and the Cristy-and Eckerman lungs model. The absorbed dose in the lungs due to 133 Xe is 0.00104 mGy/MBq. Here, the absorbed dose due to remaining tissue, included in the 133 Xe biokinetics is not significant. The absorbed dose in the lungs, due Tc 99m (MAA), is 0.065 mGy/MBq. Approximately, 4.6% of the absorbed dose is due to organs like liver, kidneys, bladder, and the rest of tissues, included in the Tc 99m biokinetics. Here, the absorbed dose is very significant to be overlooked. The dose contribution is mainly due to photons emitted by the liver. (Author)

Wider application of additions in self-compacting concrete

OpenAIRE

Liu, M.

2009-01-01

Compared to normally vibrated concrete (NVC), self-compacting concrete (SCC) possesses enhanced qualities and improves productivity and working conditions due to the elimination of compaction. SCC generally has a higher powder content than NVC and thus it is necessary to replace some of the cement by additions to achieve an economical and durable concrete. The established benefits of using low volumes of fly ash in SCC, high volumes of fly ash in NVC and the search for uses ...

A contribution to a theory of two-phase flow with phase change and addition of heat in a coolant channel of a LWR-fuel element during a loss-of-coolant accident

International Nuclear Information System (INIS)

Gaballah, I.

1978-09-01

A contribution to a theory of two-phase flow with phase change and addition of heat in a coolant channel of a LWR-fuel element during a loss-of-coolant accident. A theory was developed for the calculation of a dispersed two phase flow with heat addition in a channel with general area change. The theory was used to study different thermodynamic and gasdynamic processes, which may occur during the emergency cooling after a LOCA of a pressurized water reactor. The basic equations were formulated and solved numerically. The heat transfer mechanism was examined. Calculations have indicated that the radiative heat flux component is small compared to the convective component. A drop size spectrum was used in the calculations. Its effect on the heat transfer was investigated. It was found that the calculation with a mean drop diameter gives good results. Significant thermal non-equilibrium has been evaluated. The effect of different operating parameters on the degree of thermal non-equilibrium was studied. The flow and heat transfer in a channel with cross-sectional area change were calculated. It was shown that the channel deformation affects the state properties and the heat transfer along the channel very strongly. (orig.) 891 GL [de

Government regulation and public opposition create high additional costs for field trials with GM crops in Switzerland.

Science.gov (United States)

Bernauer, Thomas; Tribaldos, Theresa; Luginbühl, Carolin; Winzeler, Michael

2011-12-01

Field trials with GM crops are not only plant science experiments. They are also social experiments concerning the implications of government imposed regulatory constraints and public opposition for scientific activity. We assess these implications by estimating additional costs due to government regulation and public opposition in a recent set of field trials in Switzerland. We find that for every Euro spent on research, an additional 78 cents were spent on security, an additional 31 cents on biosafety, and an additional 17 cents on government regulatory supervision. Hence the total additional spending due to government regulation and public opposition was around 1.26 Euros for every Euro spent on the research per se. These estimates are conservative; they do not include additional costs that are hard to monetize (e.g. stakeholder information and dialogue activities, involvement of various government agencies). We conclude that further field experiments with GM crops in Switzerland are unlikely unless protected sites are set up to reduce these additional costs.

Canadian contribution to the European Union Home Team program for ITER

International Nuclear Information System (INIS)

Murdoch, D.K.; Blevins, J.D.; Gierszewski, P.; Matsugu, R.

1998-01-01

Canadian participation in R and D and design tasks for the ITER project is predominantly in the fuel cycle, remote handling and safety fields. These tasks are carried out in Canada by Ontario Hydro, research institutes, industry and universities. In addition, Canada provides the services of a number of specialist engineers and scientists in key positions at the three ITER work sites and in the European Home Team. The Canadian contribution, which is coordinated by the Canadian Fusion Fuels Technology Project (CFFTP), forms an integral part of the European Union Home Team program. The key components of the Canadian contribution are described. (author)

Contribution to the alien flora of Montenegro and Supplementum to the Preliminary list of plant invaders

Directory of Open Access Journals (Sweden)

Stešević, D.

2013-12-01

Full Text Available This contribution is based on the field observations from 2011 to 2013. Besides new data about distribution of some known plant invaders, one new alien species for the flora of Montenegro is reported- Solidago gigantea. This plant was recorded in 2011, on two distinct localities near the road side in peri-urban area of Nikšić and Mojkovac, in the vicinity of gardens, were it has been grown as ornamental. In 2012 survey, species was again reported for Mojkovac, but it disappeared from Nikšić, due to environmental changes caused by road construction. Remaining locality is placed near the Tara river bank, so considering ecological preferences (roadsides, disturbed river banks and moist soils, this species might become more frequent in the area. It is included into the EPPO list of invasive alien plants. In addition, alien plant Tagetes minuta is added to the preliminary list of plant invaders in Montenegro.

Enhanced Contribution of HLA in Pediatric Onset Ulcerative Colitis.

Science.gov (United States)

Venkateswaran, Suresh; Prince, Jarod; Cutler, David J; Marigorta, Urko M; Okou, David T; Prahalad, Sampath; Mack, David; Boyle, Brendan; Walters, Thomas; Griffiths, Anne; Sauer, Cary G; LeLeiko, Neal; Keljo, David; Markowitz, James; Baker, Susan S; Rosh, Joel; Pfefferkorn, Marian; Heyman, Melvin B; Patel, Ashish; Otley, Anthony; Baldassano, Robert; Noe, Joshua; Rufo, Paul; Oliva-Hemker, Maria; Davis, Sonia; Zwick, Michael E; Gibson, Greg; Denson, Lee A; Hyams, Jeffrey; Kugathasan, Subra

2018-03-19

The genetic contributions to pediatric onset ulcerative colitis (UC), characterized by severe disease and extensive colonic involvement, are largely unknown. In adult onset UC, Genome Wide Association Study (GWAS) has identified numerous loci, most of which have a modest susceptibility risk (OR 0.84-1.14), with the exception of the human leukocyte antigen (HLA) region on Chromosome 6 (OR 3.59). To study the genetic contribution to exclusive pediatric onset UC, a GWAS was performed on 466 cases with 2099 healthy controls using UK Biobank array. SNP2HLA was used to impute classical HLA alleles and their corresponding amino acids, and the results are compared with adult onset UC. HLA explained the almost entire association signal, dominated with 191 single nucleotide polymorphisms (SNPs) (p = 5 x 10-8 to 5 x 10-10). Although very small effects, established SNPs in adult onset UC loci had similar direction and magnitude in pediatric onset UC. SNP2HLA imputation identified HLA-DRB1*0103 (odds ratio [OR] = 6.941, p = 1.92*10-13) as the most significant association for pediatric UC compared with adult onset UC (OR = 3.59). Further conditioning showed independent effects for HLA-DRB1*1301 (OR = 2.25, p = 7.92*10-9) and another SNP rs17188113 (OR = 0.48, p = 7.56*10-9). Two HLA-DRB1 causal alleles are shared with adult onset UC, while at least 2 signals are unique to pediatric UC. Subsequent stratified analyses indicated that HLA-DRB1*0103 has stronger association for extensive disease (E4: OR = 8.28, p = 4.66x10-10) and female gender (OR = 8.85, p = 4.82x10-13). In pediatric onset UC, the HLA explains almost the entire genetic associations. In addition, the HLA association is approximately twice as strong in pediatric UC compared with adults, due to a combination of novel and shared effects. We speculate the paramount importance of antigenic stimulation either by infectious or noninfectious stimuli as a causal event in pediatric UC onset.

Quantitative analysis of EGR proteins binding to DNA: assessing additivity in both the binding site and the protein

Directory of Open Access Journals (Sweden)

Stormo Gary D

2005-07-01

Full Text Available Abstract Background Recognition codes for protein-DNA interactions typically assume that the interacting positions contribute additively to the binding energy. While this is known to not be precisely true, an additive model over the DNA positions can be a good approximation, at least for some proteins. Much less information is available about whether the protein positions contribute additively to the interaction. Results Using EGR zinc finger proteins, we measure the binding affinity of six different variants of the protein to each of six different variants of the consensus binding site. Both the protein and binding site variants include single and double mutations that allow us to assess how well additive models can account for the data. For each protein and DNA alone we find that additive models are good approximations, but over the combined set of data there are context effects that limit their accuracy. However, a small modification to the purely additive model, with only three additional parameters, improves the fit significantly. Conclusion The additive model holds very well for every DNA site and every protein included in this study, but clear context dependence in the interactions was detected. A simple modification to the independent model provides a better fit to the complete data.

Feline leprosy due to Candidatus 'Mycobacterium lepraefelis': Further clinical and molecular characterisation of eight previously reported cases and an additional 30 cases.

Science.gov (United States)

O'Brien, Carolyn R; Malik, Richard; Globan, Maria; Reppas, George; McCowan, Christina; Fyfe, Janet A

2017-09-01

This paper, the last in a series of three on 'feline leprosy', provides a detailed description of disease referable to the previously unnamed species, Candidatus 'Mycobacterium lepraefelis', a close relative of the human pathogens Mycobacterium leprae and Mycobacterium lepromatosis. Cases were sourced retrospectively and prospectively for this observational study, describing clinical, geographical and molecular microbiological data for cats definitively diagnosed with Candidatus 'M lepraefelis' infection. A total of 145 cases of feline leprosy were scrutinised; 114 'new' cases were sourced from the Victorian Infectious Diseases Reference Laboratory (VIDRL) records, veterinary pathology laboratories or veterinarians, and 31 cases were derived from six published studies. Thirty-eight cats were definitively diagnosed with Candidatus 'M lepraefelis' infection. Typically, cats tended to be middle-aged or older when first infected, with a male predilection. Affected cats typically had widespread cutaneous lesions, in some cases after initially localised disease. Advanced cases were often systemically unwell. All cats had outdoor access. The histological picture was lepromatous in the majority of patients, although two cases had tuberculoid disease. In one case that underwent necropsy, lesions were evident in the liver, spleen and lungs. Treatment was varied, although most cats received a combination of oral clarithromycin and rifampicin. Prognosis for recovery was variable, but typically poor. Candidatus 'M lepraefelis' typically causes high bacterial index (lepromatous) feline leprosy that in some cases progresses to systemic mycobacteriosis. The disease has a variable clinical course and prognosis. Many cases either died or were euthanased due to the infection. Multilocus sequence analysis reveals a heterogeneous picture and further analysis of draft genome sequencing may give clues to the taxonomy and epidemiology of this organism. Prospective treatment trials and

Constituents’ formal participation in the IASB’s due process: New insights into the impact of country and due process document characteristics

Directory of Open Access Journals (Sweden)

Michael Dobler

2016-09-01

Full Text Available This paper adopts a multi-issue/multi-period approach to provide new insights into key determinants of constituents’ formal participation in the due process of the International Accounting Standards Board (IASB. Based on an analysis of 8,825 comment letters submitted during the period 2006–2012, we find imbalances in the representation of constituents. Multiple regressions reveal that among various economic and cultural variables equity market capitalization and the society’s level of individualism are the key drivers of the country-level of constituents’ participation, and each variable has explanatory power over the other. The level of constituents’ participation is positively associated with the number of input opportunities offered by a due process document but unrelated to the complexity of a standard-setting project. The results are robust across various sub-samples and to additional sensitivity tests. Our findings indicate threats to the input legitimacy of the IASB and suggest avenues to stimulate constituents’ participation.

Significance of Glucose Addition on Chitosan-Glycerophosphate Hydrogel Properties

Directory of Open Access Journals (Sweden)

Dian Susanthy

2016-03-01

Full Text Available Chitosan-glycerophosphate hydrogel can be used as dental scaffold due to its thermosensitivity, gelation performance at body temperature, suitable acidity for body condition, biocompatibility, and ability to provide good environment for cell proliferation and differentiation. Previous study showed that glucose addition to the chitosan solution before steam sterilization improved its hydrogel mechanical strength. However, the effectiveness of glucose addition was still doubted because glucose might undergo Maillard reaction in that particular condition. The aims of this study are to confirm whether the glucose addition can increase the hydrogel mechanical strength and gelation rate effectively and also to compare their performance to be dental scaffold. This research was performed through several steps, namely preparation of chitosan-glycerophosphate solution, addition of glucose, gelation time test, gel mechanical strength measurement, functional group analysis, and physical properties measurements (pH, viscosity, and pore size. The result showed that glucose addition did not improve the hydrogel mechanical strength and gelation rate, neither when it was added before nor after steam sterilization. Glucose addition before steam sterilization seemed to trigger Maillard reaction or browning effect, while glucose addition after steam sterilization increased the amount of free water molecules in the hydrogel. Chitosan and glycerophosphate interact physically, but interaction between chitosan and glucose seems to occur chemically and followed by the formation of free water molecules. Glucose addition decreases the solution viscosity and hydrogel pore size so the hydrogel performance as dental scaffold is lowered.

Identification of drug-related problems by a clinical pharmacist in addition to computerized alerts

NARCIS (Netherlands)

Zaal, R.J.; Jansen, M.; Duisenberg-van Essenberg, M.; C.C., Tijssen; Roukema, J.A.; van den Bemt, P.M.

2013-01-01

Background Both clinical pharmacists and computerized physician order entry systems with clinical decision support (CPOE/CDSS) can reduce drug-related problems (DRPs). However, the contribution of a clinical pharmacist in addition to CPOE/CDSS has not been established in a prospective study.

Identification of drug-related problems by a clinical pharmacist in addition to computerized alerts

NARCIS (Netherlands)

R.J. Zaal (Rianne); M.M.P.M. Jansen (Mark M. P.); M. Duisenberg-Van Essenberg (Marjolijn); C.C. Tijssen (Cees); J.A. Roukema; P.M.L.A. van den Bemt (Patricia)

2013-01-01

textabstractBackground Both clinical pharmacists and computerized physician order entry systems with clinical decision support (CPOE/CDSS) can reduce drug-related problems (DRPs). However, the contribution of a clinical pharmacist in addition to CPOE/CDSS has not been established in a prospective

Surface modification of biomaterials and biomedical devices using additive manufacturing.

Science.gov (United States)

Bose, Susmita; Robertson, Samuel Ford; Bandyopadhyay, Amit

2018-01-15

The demand for synthetic biomaterials in medical devices, pharmaceutical products and, tissue replacement applications are growing steadily due to aging population worldwide. The use for patient matched devices is also increasing due to availability and integration of new technologies. Applications of additive manufacturing (AM) or 3D printing (3DP) in biomaterials have also increased significantly over the past decade towards traditional as well as innovative next generation Class I, II and III devices. In this review, we have focused our attention towards the use of AM in surface modified biomaterials to enhance their in vitro and in vivo performances. Specifically, we have discussed the use of AM to deliberately modify the surfaces of different classes of biomaterials with spatial specificity in a single manufacturing process as well as commented on the future outlook towards surface modification using AM. It is widely understood that the success of implanted medical devices depends largely on favorable material-tissue interactions. Additive manufacturing has gained traction as a viable and unique approach to engineered biomaterials, for both bulk and surface properties that improve implant outcomes. This review explores how additive manufacturing techniques have been and can be used to augment the surfaces of biomedical devices for direct clinical applications. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The design of impact absorbing structures for additive manufacture

International Nuclear Information System (INIS)

Brennan-Craddock, J; Brackett, D; Wildman, R; Hague, R

2012-01-01

Additive manufacturing (AM) is increasingly becoming a viable manufacturing process due to dramatic advantages that it facilitates in the area of design complexity. This paper investigates the potential of additively manufactured lattice structures for the application of tailored impact absorption specifically for conformal body protection. It explores lattice cell types based on foam microstructures and assesses their suitability for impact absorption. The effect of varying the cell strut edge design is also investigated. The implications of scaling these cells up for AM are discussed as well as the design issues regarding the handling of geometric complexity and the requirement for body conformity. The suitability of AM materials for this application is also discussed.

Water addition, evaporation and water holding capacity of poultry litter.

Science.gov (United States)

Dunlop, Mark W; Blackall, Patrick J; Stuetz, Richard M

2015-12-15

Litter moisture content has been related to ammonia, dust and odour emissions as well as bird health and welfare. Improved understanding of the water holding properties of poultry litter as well as water additions to litter and evaporation from litter will contribute to improved litter moisture management during the meat chicken grow-out. The purpose of this paper is to demonstrate how management and environmental conditions over the course of a grow-out affect the volume of water A) applied to litter, B) able to be stored in litter, and C) evaporated from litter on a daily basis. The same unit of measurement has been used to enable direct comparison-litres of water per square metre of poultry shed floor area, L/m(2), assuming a litter depth of 5cm. An equation was developed to estimate the amount of water added to litter from bird excretion and drinking spillage, which are sources of regular water application to the litter. Using this equation showed that water applied to litter from these sources changes over the course of a grow-out, and can be as much as 3.2L/m(2)/day. Over a 56day grow-out, the total quantity of water added to the litter was estimated to be 104L/m(2). Litter porosity, water holding capacity and water evaporation rates from litter were measured experimentally. Litter porosity decreased and water holding capacity increased over the course of a grow-out due to manure addition. Water evaporation rates at 25°C and 50% relative humidity ranged from 0.5 to 10L/m(2)/day. Evaporation rates increased with litter moisture content and air speed. Maintaining dry litter at the peak of a grow-out is likely to be challenging because evaporation rates from dry litter may be insufficient to remove the quantity of water added to the litter on a daily basis. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

The contribution of plant uptake to nutrient removal by floating treatment wetlands

NARCIS (Netherlands)

Keizer-Vlek, H.E.; Verdonschot, P.F.M.; Verdonschot, R.C.M.; Dekkers, T.B.M.

2014-01-01

Floating treatment wetlands (FTWs) may provide an appealing alternative to the more conventional (sub) surface flow wetlands to solve problems associated with eutrophication in urban surface waters, because they do not claim additional land area. This study examined the contribution of plant uptake

EURATOM-CEA association contributions to the 21st symposium on fusion technology

International Nuclear Information System (INIS)

Garin, P.; Grosman, A.; Beaumont, B.

2000-11-01

The 27 contributions of EURATOM-Cea association have been gathered with 6 additional papers and 1 invited paper in this document. Most papers concern Tore-Supra and deal with the ergodic divertor, particle injection, impedance concept for ICRF antennas, low hybrid current drive, RF systems, the 118 GHz ECRH experiment, the inner first wall, improved vacuum vessel protection, pellet injection, material activation, and the CIEL project. 3 of the additional papers concern the model coil of ITER

EURATOM-CEA association contributions to the 21st symposium on fusion technology

Energy Technology Data Exchange (ETDEWEB)

Garin, P; Grosman, A; Beaumont, B [and others

2000-11-01

The 27 contributions of EURATOM-Cea association have been gathered with 6 additional papers and 1 invited paper in this document. Most papers concern Tore-Supra and deal with the ergodic divertor, particle injection, impedance concept for ICRF antennas, low hybrid current drive, RF systems, the 118 GHz ECRH experiment, the inner first wall, improved vacuum vessel protection, pellet injection, material activation, and the CIEL project. 3 of the additional papers concern the model coil of ITER.

Electroweak contributions to squark-pair production processes at the LHC

Energy Technology Data Exchange (ETDEWEB)

Germer, Jan

2011-04-28

We study the electroweak (EW) contributions to squark-squark and sbottom-anti-sbottom production processes at the LHC within the framework of the Minimal Supersymmetric Standard Model (MSSM). Aiming at precise theoretical predictions, the EW contributions are considered up to next-to leading order (NLO) which are of O({alpha}{sup 2}{sub s}{alpha}). Since the EW interaction distinguishes flavor and chirality of the initial- and final-state quarks and squarks, respectively, the contributing processes are manifold and their interplay is non-trivial. All technical details needed in order to calculate the NLO EW contributions to the hadronic cross section for the abovementioned processes are given within this dissertation. This includes appropriate regularization and renormalization prescriptions and a proper treatment of mass singularities in order to get ultraviolet finite and infrared and collinear safe observables. Squark-squark production consists of 36 processes and the same amount for anti-squark- anti-squark production. The tree-level EW contributions of O({alpha}{sub s}{alpha}+{alpha}{sup 2}) and the NLO EW contributions are calculated for all processes. Depending on the flavor and chirality of the produced squarks, many interferences between EW-mediated and QCD-mediated diagrams give non-zero contributions at tree-level and NLO EW. While the tree-level EW contributions to the integrated cross section can reach the 20% level, the NLO EW corrections typically lower the LO prediction by a few percent. Sbottom-anti-sbottom pair production exhibits specific features like left-right mixing and the renormalization of the sbottom sector which has to be chosen with care in order to get reliable predictions. In addition, Yukawa couplings get enhanced for large values of tan {beta} with the related need of resummation. This renders the computation of the electroweak contributions substantially different from the corresponding computations for squark-anti- squark and stop

Electroweak contributions to squark-pair production processes at the LHC

International Nuclear Information System (INIS)

Germer, Jan

2011-01-01

We study the electroweak (EW) contributions to squark-squark and sbottom-anti-sbottom production processes at the LHC within the framework of the Minimal Supersymmetric Standard Model (MSSM). Aiming at precise theoretical predictions, the EW contributions are considered up to next-to leading order (NLO) which are of O(α 2 s α). Since the EW interaction distinguishes flavor and chirality of the initial- and final-state quarks and squarks, respectively, the contributing processes are manifold and their interplay is non-trivial. All technical details needed in order to calculate the NLO EW contributions to the hadronic cross section for the abovementioned processes are given within this dissertation. This includes appropriate regularization and renormalization prescriptions and a proper treatment of mass singularities in order to get ultraviolet finite and infrared and collinear safe observables. Squark-squark production consists of 36 processes and the same amount for anti-squark- anti-squark production. The tree-level EW contributions of O(α s α+α 2 ) and the NLO EW contributions are calculated for all processes. Depending on the flavor and chirality of the produced squarks, many interferences between EW-mediated and QCD-mediated diagrams give non-zero contributions at tree-level and NLO EW. While the tree-level EW contributions to the integrated cross section can reach the 20% level, the NLO EW corrections typically lower the LO prediction by a few percent. Sbottom-anti-sbottom pair production exhibits specific features like left-right mixing and the renormalization of the sbottom sector which has to be chosen with care in order to get reliable predictions. In addition, Yukawa couplings get enhanced for large values of tan β with the related need of resummation. This renders the computation of the electroweak contributions substantially different from the corresponding computations for squark-anti- squark and stop-anti-stop production. The tree-level EW

Additional operations in algebra of structural numbers for control algorithm development

Directory of Open Access Journals (Sweden)

Morhun A.V.

2016-12-01

Full Text Available The structural numbers and the algebra of the structural numbers due to the simplicity of representation, flexibility and current algebraic operations are the powerful tool for a wide range of applications. In autonomous power supply systems and systems with distributed generation (Micro Grid mathematical apparatus of structural numbers can be effectively used for the calculation of the parameters of the operating modes of consumption of electric energy. The purpose of the article is the representation of the additional algebra of structural numbers. The standard algebra was proposed to be extended by the additional operations and modification current in order to expand the scope of their use, namely to construct a flexible, adaptive algorithms of control systems. It is achieved due to the possibility to consider each individual component of the system with its parameters and provide easy management of entire system and each individual component. Thus, structural numbers and extended algebra are the perspective line of research and further studying is required.

Effect of mineral additives on structure and properties of concrete for pavements

Directory of Open Access Journals (Sweden)

Sobol Khrystyna

2017-12-01

Full Text Available Concrete pavements is an attractive alternative to asphalt pavements because of its lower cost and higher durability. Major contribution to sustainable development can be made by partial replacement of cement in concrete pavement with supplementary cementitious materials of different nature and origin. In this paper, the effect of natural zeolite and perlite additives in complex with chemical admixtures on the structure and properties of concrete for pavement was studied. Compressive and flexural strength test was used to study the mechanical behavior of designed concrete under load. Generally, the compressive strength of both control concrete and concrete containing mineral additives levels at the later ages of hardening. The microstructure analysis of concrete with mineral additives of different nature activity showed the formation of additional amount of hydration products such as tobermorite type calcium hydrosilicate which provide self-reinforcement of hardening concrete system.

Direct observation of lubricant additives using tomography techniques

Energy Technology Data Exchange (ETDEWEB)

Chen, Yunyun [Department of Materials Science and Engineering, Texas A& M University, College Station, Texas 77843 (United States); Sanchez, Carlos [Mechanical Engineering, Texas A& M University, College Station, Texas 77843 (United States); Parkinson, Dilworth Y. [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Liang, Hong, E-mail: hliang@tamu.edu [Department of Materials Science and Engineering, Texas A& M University, College Station, Texas 77843 (United States); Mechanical Engineering, Texas A& M University, College Station, Texas 77843 (United States)

2016-07-25

Lubricants play important roles in daily activities such as driving, walking, and cooking. The current understanding of mechanisms of lubrication, particularly in mechanical systems, has been limited by the lack of capability in direct observation. Here, we report an in situ approach to directly observe the motion of additive particles in grease under the influence of shear. Using the K-edge tomography technique, it is possible to detect particular additives in a grease and observe their distribution through 3D visualization. A commercial grease as a reference was studied with and without an inorganic additive of Fe{sub 3}O{sub 4} microparticles. The results showed that it was possible to identify these particles and track their movement. Under a shear stress, Fe{sub 3}O{sub 4} particles were found to adhere to the edge of calcium complex thickeners commonly used in grease. Due to sliding, the grease formed a film with increased density. This approach enables in-line monitoring of a lubricant and future investigation in mechanisms of lubrication.

The effect of boron addition on microstructure and mechanical properties of biomedical Ti35Nb6Ta alloy

Energy Technology Data Exchange (ETDEWEB)

Málek, Jaroslav, E-mail: malek@ujp.cz [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Prague, Zbraslav (Czech Republic); CTU in Prague, Faculty of Mechanical Engineering, Department of Materials Engineering, Karlovo Namesti 13, 121 35 Praha 2 (Czech Republic); Hnilica, František, E-mail: hnilica@ujp.cz [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Prague, Zbraslav (Czech Republic); Veselý, Jaroslav, E-mail: vesely@ujp.cz [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Prague, Zbraslav (Czech Republic); Smola, Bohumil, E-mail: smola@met.mff.cuni.cz [Charles University, Faculty of Mathematics and Physics, Ke Karlovu 5, 121 16 Prague 2 (Czech Republic); Březina, Vítězslav, E-mail: brezinavita@gmail.com [Masaryk University, Faculty of Medicine, Department of Stomathology, Komenského Náměstí 220/2, 662 43 Brno (Czech Republic); Kolařík, Kamil, E-mail: kamil.kolarik@email.cz [Faculty of Mechanical Engineering, University of West Bohemia, Univerzitní 22, 306 14 Plzeň (Czech Republic)

2014-10-15

The beta-titanium alloys are promising materials for bioapplications but their processing via melting is difficult. Coarse grains have been observed in as-cast specimens. Subsequent thermo-mechanical processing seems to be necessary in order to obtain fine-grained microstructure with better mechanical properties. The grain size can be decreased significantly by addition of small boron amount. In this work Ti–35Nb–6Ta alloy with various B additions (0, 0.05, 0.1, 0.3 and 0.5 wt.%) has been studied. Even the smallest amount of B leads to significant grain refinement in Ti–35Nb–6Ta alloy (from 1300 to about 350 μm). Slight grain refinement has been observed also after hot forging and solution treatment. TiB particles emerged in specimens due to B addition. These particles contribute to changes in mechanical properties not only in hot forged and solution treated specimens (hardness increase from 140 to 180 HV10), but also in cold swaged specimens (hardness from 230 to 250 HV10, tensile strength from 800 to 920 MPa). The hardness values can be increased up to 370 HV10 during aging at 400 °C (specimen with 0.5 wt.% B). It has been observed that specimens with low boron addition 0.05 wt.% possess no cytotoxicity. On the other hand in specimens with 0.1 wt.% B or more slight adverse effect on cytotoxicity has been observed. - Highlights: • The influence of boron on microstructure and mechanical properties has been studied. • Beta-transus temperature has been determined. • Cytotoxicity depending on boron content has been evaluated. • Possibility of final heat treatment has been determined.

Understanding the contribution of suicide to life expectancy in South Korea

Directory of Open Access Journals (Sweden)

Aggie Noah

2016-09-01

Full Text Available Background: South Korea has the highest rate and highest rate of increase in suicide among developed countries. The suicide epidemic in Korea is an anomaly, and suicide rates are high for both men and women, with no signs of decreasing. Yet we do not know the extent to which suicide has reduced life expectancy in Korea. Objective: We investigated whether and to what extent the rapid increase in suicide has contributed to changes in Korean life expectancy, a key indicator of population health. Methods: We used a recently developed decomposition method that separates the contribution of suicide's effect on change in life expectancy into two parts: that due to change in the overall suicide incidence rate and that due to change in the mean age of suicide victims. Results: From 1995 to 2010, life expectancy increased by 6.5 years in Korea, with change in most causes of death contributing to its growth. We nonetheless find, as expected, that the rise in suicides reduced the increase in life expectancy from 1995 to 2010, so life expectancy in Korea is about 0.21 years lower than it would have been without the increase in suicides. Moreover, had the age of suicide victims remained stable, we project that Korea's life expectancy would be fully 0.70 years lower than it is. Conclusions: Although the growth in suicide was the largest single factor slowing the rise in Korean life expectancy, the effect would have been even larger had the age of suicide victims not increased.

Time-dependent London approach: Dissipation due to out-of-core normal excitations by moving vortices

Science.gov (United States)

Kogan, V. G.

2018-03-01

The dissipative currents due to normal excitations are included in the London description. The resulting time-dependent London equations are solved for a moving vortex and a moving vortex lattice. It is shown that the field distribution of a moving vortex loses its cylindrical symmetry. It experiences contraction that is stronger in the direction of the motion than in the direction normal to the velocity v . The London contribution of normal currents to dissipation is small relative to the Bardeen-Stephen core dissipation at small velocities, but it approaches the latter at high velocities, where this contribution is no longer proportional to v2. To minimize the London contribution to dissipation, the vortex lattice is oriented so as to have one of the unit cell vectors along the velocity. This effect is seen in experiments and predicted within the time-dependent Ginzburg-Landau theory.

The Contribution of cocoa additive to cigarette smoking addiction

NARCIS (Netherlands)

Rambali B; Andel I van; Schenk E; Wolterink G; Werken G van de; Stevenson H; Vleeming W; TOX; SIR; LVM; PZO

2003-01-01

In this report the effect of these compounds on the addiction to cigarette smoking was assessed, using currently available information in the literature on psychoactive compounds of cocoa. The investigated psychoactive cocoa compounds were theobromine, caffeine, serotonin, histamine, tryptophan,

The Contribution of cocoa additive to cigarette smoking addiction

NARCIS (Netherlands)

Rambali B; van Andel I; Schenk E; Wolterink G; van de Werken G; Stevenson H; Vleeming W; TOX; SIR; LVM; PZO

2003-01-01

In dit rapport wordt de mogelijke bijdrage van cacao aan rookverslaving beschreven. Cacao wordt aan tabak toegevoegd om de smaak te verbeteren. Daarnaast bevat cacao tal van psychoactieve stoffen die mogelijk bijdragen aan rookverslaving Dit literatuuronderzoek beschrijft de blootstelling,

Public radiation exposure due to radon transport from a uranium mine

International Nuclear Information System (INIS)

Akber, R.A.; Johnston, A.; Pfitzner, J.

1992-01-01

Radon and radon daughter concentrations at locations several kilometres away from a uranium mine are due both to the background sources and the mine-related sources. The contribution of these two types of sources should be distinguished because the authorised limits on public radiation dose apply only to the mine-related sources. Such a distinction can be achieved by measuring radon and radon daughter concentration in the wind sectors containing only the background sources and those in the wind sectors containing both the background and the mine-related sources. This approach has been used to make estimates of public radiation dose due to radon transport from the Ranger Uranium Mine in Australia. The residential town of Jabiru, the non-residential working town of Jabiru East, and the aboriginal camp sites in the vicinity of the mine were considered. The results indicate that, for the groups of population considered, the annual mine-related dose varies between 0.04 and 0.2 mSv. (author)

Compositional, thermal and microstructural characterization of the Nopal (opuntia ficus indica), for addition in commercial cement mixtures

Science.gov (United States)

Hernández Carrillo, C. G.; Gómez-Cuaspud, J. A.; E Martínez Suarez, C.

2017-12-01

The Nopal (opuntia ficus indica) from remote times has contributed like food and additive product in prehispanic constructions; although it grows in all the Colombian territory is very little used and its contribution in mixtures of Colombian cement is unknown. In order to evaluate the hydration characteristics of Nopal, several Thermogravimetric Analysis (TGA) were performed to evaluate the optimal temperature of dehydration. Initially, the results show that around 175°C the weight loss is approximately 95%, this mass loss corresponds to the process of physical removal, suggesting that at least a remaining amount of 5% (w/w) has the ability to retain large amounts of water which is stored in the micro-structural deposits of Nopal. The evaluation by means Scanning Electron Microscopy (SEM), confirm that the whole cactus structure enables the water storage at cellular level. The results of infrared spectroscopy (FT-IR) and Energy Dispersive X-ray (EDX) analysis allowed the qualitative and semi-quantitative evaluation of the presence of functional groups and elemental chemical composition of Nopal respectively, mainly related with polysaccharide functional groups, which corresponds to 85% of the total composition. Other functional groups, are related with protein and mineral components. This found characteristics are relevant for the water retention in process that require the decrease of water consumption and the reinforcing of mechanical properties and durability, due to ability of Nopal mucilage to restore its hydration characteristics.

Reconciling projections of the Antarctic contribution to sea level rise

Science.gov (United States)

Edwards, Tamsin; Holden, Philip; Edwards, Neil; Wernecke, Andreas

2017-04-01

Two recent studies of the Antarctic contribution to sea level rise this century had best estimates that differed by an order of magnitude (around 10 cm and 1 m by 2100). The first, Ritz et al. (2015), used a model calibrated with satellite data, giving a 5% probability of exceeding 30cm by 2100 for sea level rise due to Antarctic instability. The second, DeConto and Pollard (2016), used a model evaluated with reconstructions of palaeo-sea level. They did not estimate probabilities, but using a simple assumption here about the distribution shape gives up to a 5% chance of Antarctic contribution exceeding 2.3 m this century with total sea level rise approaching 3 m. If robust, this would have very substantial implications for global adaptation to climate change. How are we to make sense of this apparent inconsistency? How much is down to the data - does the past tell us we will face widespread and rapid Antarctic ice losses in the future? How much is due to the mechanism of rapid ice loss ('cliff failure') proposed in the latter paper, or other parameterisation choices in these low resolution models (GRISLI and PISM, respectively)? How much is due to choices made in the ensemble design and calibration? How do these projections compare with high resolution, grounding line resolving models such as BISICLES? Could we reduce the huge uncertainties in the palaeo-study? Emulation provides a powerful tool for understanding these questions and reconciling the projections. By describing the three numerical ice sheet models with statistical models, we can re-analyse the ensembles and re-do the calibrations under a common statistical framework. This reduces uncertainty in the PISM study because it allows massive sampling of the parameter space, which reduces the sensitivity to reconstructed palaeo-sea level values and also narrows the probability intervals because the simple assumption about distribution shape above is no longer needed. We present reconciled probabilistic

Springing Response Due to Directional Wave Field Excitation

DEFF Research Database (Denmark)

Vidic-Perunovic, Jelena; Jensen, Jørgen Juncher

2004-01-01

This paper analyses the wave-induced high-frequency bending moment response of ships, denoted springing. The aim is to predict measured severe springing responses in a large bulk carrier. It is shown that the most important springing contribution is due to the resultant second order excitation...... in multidirectional sea. The incident pressure field from the second order bidirectional wave field is derived, including the non-linear cross-coupling terms between the two wave systems (e.g. wind driven waves and swell). The resulting effect of the super-harmonic cross-coupling interaction terms on the springing...... response is discussed. An example with opposing waves is given, representing probably the 'worst' case for energy exchange between the wave systems. Theoretical predictions of standard deviation of wave- and springing-induced stress amidships are compared with full-scale measurements for a bulk carrier....

On axial temperature gradients due to large pressure drops in dense fluid chromatography.

Science.gov (United States)

Colgate, Sam O; Berger, Terry A

2015-03-13

The effect of energy degradation (Degradation is the creation of net entropy resulting from irreversibility.) accompanying pressure drops across chromatographic columns is examined with regard to explaining axial temperature gradients in both high performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC). The observed effects of warming and cooling can be explained equally well in the language of thermodynamics or fluid dynamics. The necessary equivalence of these treatments is reviewed here to show the legitimacy of using whichever one supports the simpler determination of features of interest. The determination of temperature profiles in columns by direct application of the laws of thermodynamics is somewhat simpler than applying them indirectly by solving the Navier-Stokes (NS) equations. Both disciplines show that the preferred strategy for minimizing the reduction in peak quality caused by temperature gradients is to operate columns as nearly adiabatically as possible (i.e. as Joule-Thomson expansions). This useful fact, however, is not widely familiar or appreciated in the chromatography community due to some misunderstanding of the meaning of certain terms and expressions used in these disciplines. In fluid dynamics, the terms "resistive heating" or "frictional heating" have been widely used as synonyms for the dissipation function, Φ, in the NS energy equation. These terms have been widely used by chromatographers as well, but often misinterpreted as due to friction between the mobile phase and the column packing, when in fact Φ describes the increase in entropy of the system (dissipation, ∫TdSuniv>0) due to the irreversible decompression of the mobile phase. Two distinctly different contributions to the irreversibility are identified; (1) ΔSext, viscous dissipation of work done by the external surroundings driving the flow (the pump) contributing to its warming, and (2) ΔSint, entropy change accompanying decompression of

The Influence of Cu Addition on Dispersoid Formation and Mechanical Properties of Al-Mn-Mg 3004 Alloy

Directory of Open Access Journals (Sweden)

Zhen Li

2018-03-01

Full Text Available The effect of Cu addition on dispersoid precipitation, mechanical properties and creep resistance was investigated in an Al-Mn-Mg 3004 alloy. The addition of Cu promoted dispersoid precipitation by increasing the number density and decreasing the size of dispersoids. Metastable β′-Mg2Si and Q-AlCuMgSi precipitates were observed during the heating process and both could provide favorable nucleation sites for dispersoid precipitation. The addition of Cu improved the thermal stability of dispersoids during a long-term thermal holding at 350 °C for 500 h. Results of mechanical testing show that the addition of Cu remarkably improved the hardness at room temperature, as well as the yield strength and creep resistance at 300 °C, which was mainly attributed to dispersoid strengthening and Cu solid solution strengthening. The yield strength contribution at 300 °C was quantitatively evaluated based on the dispersoid, solid solution and matrix contributions. It was confirmed that dispersoid strengthening is the main strengthening mechanism in the experimental alloys.

Fate of water pumped from underground and contributions to sea-level rise

Science.gov (United States)

Wada, Yoshihide; Lo, Min-Hui; Yeh, Pat J.-F.; Reager, John T.; Famiglietti, James S.; Wu, Ren-Jie; Tseng, Yu-Heng

2016-08-01

The contributions from terrestrial water sources to sea-level rise, other than ice caps and glaciers, are highly uncertain and heavily debated. Recent assessments indicate that groundwater depletion (GWD) may become the most important positive terrestrial contribution over the next 50 years, probably equal in magnitude to the current contributions from glaciers and ice caps. However, the existing estimates assume that nearly 100% of groundwater extracted eventually ends up in the oceans. Owing to limited knowledge of the pathways and mechanisms governing the ultimate fate of pumped groundwater, the relative fraction of global GWD that contributes to sea-level rise remains unknown. Here, using a coupled climate-hydrological model simulation, we show that only 80% of GWD ends up in the ocean. An increase in runoff to the ocean accounts for roughly two-thirds, whereas the remainder results from the enhanced net flux of precipitation minus evaporation over the ocean, due to increased atmospheric vapour transport from the land to the ocean. The contribution of GWD to global sea-level rise amounted to 0.02 (+/-0.004) mm yr-1 in 1900 and increased to 0.27 (+/-0.04) mm yr-1 in 2000. This indicates that existing studies have substantially overestimated the contribution of GWD to global sea-level rise by a cumulative amount of at least 10 mm during the twentieth century and early twenty-first century. With other terrestrial water contributions included, we estimate the net terrestrial water contribution during the period 1993-2010 to be +0.12 (+/-0.04) mm yr-1, suggesting that the net terrestrial water contribution reported in the IPCC Fifth Assessment Report report is probably overestimated by a factor of three.

Effect of Additives on the Selectivity and Reactivity of Enzymes.

Science.gov (United States)

Liang, Yi-Ru; Wu, Qi; Lin, Xian-Fu

2017-01-01

Enzymes have been widely used as efficient, eco-friendly, and biodegradable catalysts in organic chemistry due to their mild reaction conditions and high selectivity and efficiency. In recent years, the catalytic promiscuity of many enzymes in unnatural reactions has been revealed and studied by chemists and biochemists, which has expanded the application potential of enzymes. To enhance the selectivity and activity of enzymes in their natural or promiscuous reactions, many methods have been recommended, such as protein engineering, process engineering, and media engineering. Among them, the additive approach is very attractive because of its simplicity to use and high efficiency. In this paper, we will review the recent developments about the applications of additives to improve the catalytic performances of enzymes in their natural and promiscuous reactions. These additives include water, organic bases, water mimics, cosolvents, crown ethers, salts, surfactants, and some particular molecular additives. © 2017 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Solid-State Additive Manufacturing for Heat Exchangers

Science.gov (United States)

Norfolk, Mark; Johnson, Hilary

2015-03-01

Energy densities in devices are increasing across many industries including power generation, high power electronics, manufacturing, and automotive. Increasingly, there is a need for very high efficiency thermal management devices that can pull heat out of a small area at higher and higher rates. Metal additive manufacturing (AM) technologies have the promise of creating parts with complex internal geometries required for integral thermal management. However, this goal has not been met due to constraints in fusion-based metal 3D printers. This work presents a new strategy for metal AM of heat exchangers using an ultrasonic sheet lamination approach.

Years of life lost due to external radiation exposure

Directory of Open Access Journals (Sweden)

Raičević Jagoš J.

2004-01-01

Full Text Available In this paper a new approach for calculation of the years of life lost per excess death due to stochastic health effects is applied to external exposure pathways. The short-term external exposures are due to the passage of radioactive cloud and due to the skin and clothes contamination. The long-term external exposure is the one from the radioactive material deposited on the ground (groundshine. Three nuclides, 131I, 137Cs, and 239Pu, and with the extremely wide range of half-life are considered in order to examine their possible influence on the calculated values of years of life lost. For each of these nuclides, the number of years of life lost has been found as a decreasing function of the age at the expo sure and presented graphically in this paper. For protracted exposures, the fully averaged number of years of life lost is negative correlated with the nuclide’s half-life. On the other hand, the short-term external exposures do not depend on the nuclide’s half-life. In addition, a weak years of life lost dependence of the dose has been commented.

75 FR 34388 - Employee Contribution Elections and Contribution Allocations

Science.gov (United States)

2010-06-17

... contributions equal to 3 percent of the employee's basic pay will be deducted from his or her pay and... employees who are rehired after a separation in service of 31 or more calendar days and who are eligible to participate in the TSP will automatically have 3 percent of their basic pay contributed to the TSP, unless...

Physical disability contributes to caregiver stress in dementia caregivers.

Science.gov (United States)

Bruce, David G; Paley, Glenys A; Nichols, Pamela; Roberts, David; Underwood, Peter J; Schaper, Frank

2005-03-01

Previous findings of studies on the impact of physical illness on caregiver health have been inconsistent. The authors wanted to determine whether physical disability, as determined by the SF-12 survey that provides information on both physical and mental health problems, contributes to caregiver stress. The authors interviewed 91 primary caregivers (aged 38-85 years) of persons with dementia who had been referred by their family physicians for the first time for formal support services or memory evaluation. Caregivers completed the SF-12 version of the Medical Outcomes Study Short Form Health Survey that generates Mental Component Summary (MCS) and Physical Component Summary (PCS) scores and reported on caregiver stress and concurrent medical conditions and medications. Most caregivers reported stress (76.9%), having medical conditions (72.4%), or taking medications (67%). The MCS but not the PCS scores were significantly lower than community norms, indicating an excess of disability due to mental health problems. Nevertheless, 40.7% had PCS scores indicating some degree of physical disability. Using multiple logistic regression analysis, PCS scores but not the presence of medical problems were independently associated with caregiver stress. Chronic disability as assessed by SF-12 PCS scores is independently associated with caregiver stress. These data suggest that caregivers of persons with dementia should be assessed for disabling physical conditions and mental health problems. In addition, reducing the impact of physical disability could ameliorate caregiver stress.

PSI contribution to the EU project ECOMONT

Energy Technology Data Exchange (ETDEWEB)

Portmann, W; Siegwolf, R T; Saurer, M; Scheidegger, Y; Geissbuehler, P; Furger, M; Poggio, L; Erne, R; Richter, R; Buerki, D; Graber, W K [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-06-01

Land-use changes (intensification, extensification and abandonment) in agriculture and forestry are considered to be the major driving forces for changes in ecosystem function and dynamics, and in landscape patterns in Europe. The aim of the EU project ECOMONT is to investigate the potential risks due to land-use change in the mountainous ecosystem. Fluxes of sensible and latent heat, water vapour, CO{sub 2} and pollutants between the vegetation and the atmosphere are sensitive and critical factors characterising landscape function. The Atmospheric Pollution Section of the PSI contributes to this project with the measurements of these fluxes. The measuring techniques, the experimental setup and first results are presented. (author) 4 figs., 3 refs.

Human Resources Development and ICT Contribution to the Tourist Destination Competitiveness

OpenAIRE

Ramona Gruescu; Roxana Nanu; Anca Tanasie

2009-01-01

The paper envisages aspects concerning identification of the competitive advantage of a tourist destination from a double perspective: the critical contribution of the employees and the ICT impact on promoting and selling the destination. Research methodology includes „bottom to top” analysis of the mentioned indicators. Thus, results include the eficientisation of tourist businesses and destinations due to both human element development and ICT technologies. Two essential basis of the compet...

Stakeholder relationships and social welfare: a behavioral theory of contributions to joint value creation

NARCIS (Netherlands)

Bridoux, F.; Stoelhorst, J.W.

Firms play a crucial role in furthering social welfare through their ability to foster stakeholders’ contributions to joint value creation, i.e., value creation that involves a public-good dilemma due to high task and outcome interdependence - leading to what economists have labeled the ‘team

Gas Generation during Sodium Permanganate Addition to HB-Line Phase II Filtrate Tank

International Nuclear Information System (INIS)

Hill, B.C.

2002-01-01

HB-Line Phase II process requires the addition of sodium permanganate followed by a sodium nitrite addition to prevent the precipitation of plutonium solids in a non-geometrically safe vessel. Previous experimental work has shown this method effective. Current concerns are related to the gas generated by the reaction. Potential difficulties include tank over-pressurization and tank overflow due to foaming or eructation. It is also necessary to verify that the quantity of permanganate specified by the facility is sufficient to reach the desired endpoint in a single addition

A contribution to the energy supply of innovative drive-by-wire vehicle concepts; Beitrag zur Energieversorgung innovativer Drive-by-Wire-Fahrzeugkonzepte

Energy Technology Data Exchange (ETDEWEB)

Sieglin, Erik

2009-07-01

Due to an increasing number of functions and driver assistance systems, the architecture of modern vehicles ever becomes more complex. This especially results in an increasing expenditure with the integration of new assistance systems. In order to oppose against this trend, one approach is the centralization of data processing. In this case, a drive-by-wire architecture without mechanical relapse level particularly is suitable. The contribution under consideration therefore supplies methods and approaches with which a suitable power supply is specified and realized. Their function can be verified. Apart from the aspects in terms of safety engineering, board specific questions are observed. The explanation of the procedure takes place using a prototypical structure as an example. Additionally, the hardware-in-the-loop-simulator and the processing of the tests are described.

Over-additive increase of bacterial mutations by combined action of ultraviolet light and alkylation

International Nuclear Information System (INIS)

Herrmann, S.; Hotz, G.; Herrlich, P.

1982-05-01

Mutagenic agents added in combination may contribute to an overall biological effect in proportion to the effect they would have if given individually. The combined effect may, however, not just be additive but rather result in a response above or below expectation if the two mutagenic pathways interacted at some level. We report here on one such example. Ultraviolet light and subsequent treatment with the alkylating agent ethylmethane-sulfonate (EMS) led to an over-additive increase of bacterial mutations. This is interesting with respect to unravelling the level mutagens interact. In addition such data may relate to the human situation which is only in the process of being assessed. (orig.) [de

Nurse middle managers contributions to patient-centred care: A 'managerial work' analysis.

Science.gov (United States)

Lalleman, Pcb; Smid, Gac; Dikken, J; Lagerwey, M D; Schuurmans, M J

2017-10-01

Nurse middle managers are in an ideal position to facilitate patient-centred care. However, their contribution is underexposed in literature due to difficulties to articulate this in practice. This paper explores how nurse middle managers contribute to patient-centred care in hospitals. A combination of time-use analysis and ethnographic work was used to disclose their contribution to patient-centred care at a micro level. Sixteen nurse managers were shadowed for over 560 hours in four hospitals. Some nurse middle managers seldom contribute to patient-centred care. Others are involved in direct patient care, but this does not result in patient-centred practices. At one hospital, the nurse middle managers did contribute to patient-centred care. Here balancing between "organizing work" and "caring work" is seen as a precondition for their patient-centeredness. Other important themes are feedback mechanisms; place matters; with whom to talk and how to frame the issues at stake; and behavioral style. Both "hands-on" and "heads-on" caring work of nurse middle managers enhances their patient-centeredness. This study is the first of its kind to obtain insight in the often difficult to articulate "doings" of nurse middle managers with regard to patient-centred care through combining time-use analysis with ethnographic work. © 2017 John Wiley & Sons Ltd.

An improvement of the base bleed unit on base drag reduction and heat energy addition as well as mass addition

International Nuclear Information System (INIS)

Xue, Xiaochun; Yu, Yonggang

2016-01-01

Highlights: • A 2D axisymmetric Navier-Stokes equation for a multi-component reactive system is solved. • The coupling of the internal and wake flow field with secondary combustion is calculated. • Detailed data with combined effects of boattailing and post-combustion are obtained. • The mechanism of heat energy addition and thermodynamics performances is investigated. - Abstract: Numerical simulations are carried out to investigate the base drag and energy characteristics of a base-bleed projectile with and without containing the effect of a post-combustion process for a boattailed afterbody in a supersonic flow, and then to analyze the key factor of drag reduction and pressure decreasing of base bleed projectile. Detailed chemistry models for H_2−CO combustion have been incorporated into a Navier-Stokes computer code and applied to flow field simulation in the base region of a base-bleed projectile. Detailed numerical results for the flow patterns and heat energy addition as well as mass addition for different conditions are presented and compared with existing experimental data. The results shows that, the post-combustion contributes to energy addition and base drag reduction up to 78% on account of that the heat energy released from the post-combustion using fuel-rich reaction products as the fuel in the wake region is much higher than for the corresponding cold bleed and hot bleed cases. In addition, the temperature distribution regularities are changed under post-combustion effect, presenting that the peak appears in a couple of recirculation regions. The fuel-rich bleed gas flows into the shear layer along the crack between these two recirculation regions and then those can readily burn when mixing with the freestream, thus causing component changes of H_2 and CO in the base flowfield.

Modeling gamma radiation dose in dwellings due to building materials.

Science.gov (United States)

de Jong, Peter; van Dijk, Willem

2008-01-01

A model is presented that calculates the absorbed dose rate in air of gamma radiation emitted by building materials in a rectangular body construction. The basis for these calculations is formed by a fixed set of specific absorbed dose rates (the dose rate per Bq kg(-1) 238U, 232Th, and 40K), as determined for a standard geometry with the dimensions 4 x 5 x 2.8 m3. Using the computer codes Marmer and MicroShield, correction factors are assessed that quantify the influence of several room and material related parameters on the specific absorbed dose rates. The investigated parameters are the position in the construction; the thickness, density, and dimensions of the construction parts; the contribution from the outer leave; the presence of doors and windows; the attenuation by internal partition walls; the contribution from building materials present in adjacent rooms; and the effect of non-equilibrium due to 222Rn exhalation. To verify the precision, the proposed method is applied to three Dutch reference dwellings, i.e., a row house, a coupled house, and a gallery apartment. The averaged difference with MCNP calculations is found to be 4%.

Genetic programming for evolving due-date assignment models in job shop environments.

Science.gov (United States)

Nguyen, Su; Zhang, Mengjie; Johnston, Mark; Tan, Kay Chen

2014-01-01

Due-date assignment plays an important role in scheduling systems and strongly influences the delivery performance of job shops. Because of the stochastic and dynamic nature of job shops, the development of general due-date assignment models (DDAMs) is complicated. In this study, two genetic programming (GP) methods are proposed to evolve DDAMs for job shop environments. The experimental results show that the evolved DDAMs can make more accurate estimates than other existing dynamic DDAMs with promising reusability. In addition, the evolved operation-based DDAMs show better performance than the evolved DDAMs employing aggregate information of jobs and machines.

Additional results on space environmental effects on polymer matrix composites: Experiment A0180

International Nuclear Information System (INIS)

Tennyson, R.C.

1992-01-01

Additional experimental results on the atomic oxygen erosion of boron, Kevlar, and graphite fiber reinforced epoxy matrix composites are presented. Damage of composite laminates due to micrometeoroid/debris impacts is also examined with particular emphasis on the relationship between damage area and actual hole size due to particle penetration. Special attention is given to one micrometeoroid impact on an aluminum base plate which resulted in ejecta visible on an adjoining vertical flange structure

TEMA and Dot Enumeration Profiles Predict Mental Addition Problem Solving Speed Longitudinally.

Science.gov (United States)

Major, Clare S; Paul, Jacob M; Reeve, Robert A

2017-01-01

Different math indices can be used to assess math potential at school entry. We evaluated whether standardized math achievement (TEMA-2 performance), core number abilities (dot enumeration, symbolic magnitude comparison), non-verbal intelligence (NVIQ) and visuo-spatial working memory (VSWM), in combination or separately, predicted mental addition problem solving speed over time. We assessed 267 children's TEMA-2, magnitude comparison, dot enumeration, and VSWM abilities at school entry (5 years) and NVIQ at 8 years. Mental addition problem solving speed was assessed at 6, 8, and 10 years. Longitudinal path analysis supported a model in which dot enumeration performance ability profiles and previous mental addition speed predicted future mental addition speed on all occasions, supporting a componential account of math ability. Standardized math achievement and NVIQ predicted mental addition speed at specific time points, while VSWM and symbolic magnitude comparison did not contribute unique variance to the model. The implications of using standardized math achievement and dot enumeration ability to index math learning potential at school entry are discussed.

A Word from the DG: Additional resources 
for CERN’s future

CERN Document Server

2007-01-01

As I announced to you in my speech on 27 June, one of the Council’s key decisions in June concerned the approval of the programme of proposed additional activities and of the associated additional budget resources amounting to 240 million Swiss francs for the period from 2008 to 2011. We must salute this important decision and thank the Member States for their contributions, in particular the Host States who have committed themselves to funding half the additional budget resources. This decision is the logical follow-up to the definition of the European Strategy for Particle Physics for Europe adopted by the Council last year and makes it possible to start implementing the strategy as presented last autumn in the CERN Management’s White Paper. We have all repeatedly pleaded the case for these additional resources. During the period of reimbursement of the bank loans for the construction of the LHC, the extra resources are essential to ensure improved operation of the d...

Ancillary obligations as an additional obligation of a limited liability company's member

Directory of Open Access Journals (Sweden)

Marjanski Vladimir Ž.

2016-01-01

Full Text Available Ancillary obligation can be defined as an obligation of a limited liability company's member undertaken through the instrument of incorporation, which can take the form of monetary or non-monetary obligation (usually it is an obligation of a non-monetary character, which has a certain financial value and can be the object of a legally valid obligation. Ancillary obligations, as a contribution to activities of the company, are not regulated in the Law on Companies. The legal nature of this obligation is different from the obligation to make a contribution in money or in kind to a company's assets, to make additional pay-ins or from the landing of funds to the company. Ancillary obligation is an optional and additional obligation of a limited liability company's member and the obligation itself and its contents is defined in the instrument of incorporation. When a limited liability company's member undertakes an ancillary obligation this creates a distinctive relationship between the member and the company, concerning their respective obligations and the legal status of the company, as well as certain consequences derived from those obligations.

EFFECT OF THE Si POWDER ADDITIONS ON THE PROPERTIES OF SiC COMPOSITES

Directory of Open Access Journals (Sweden)

GUOGANG XU

2012-09-01

Full Text Available By means of transient plastic phase process, the SiC silicon carbide kiln furniture materials were produced through adding Si powder to SiC materials. At the condition of the same additions of SiO2 powder, the effect of the Si powder additions on properties of silicon carbide materials after sintered at 1450°C for 3 h in air atmosphere was studied by means of SEM and other analysis methods. The results showed that silicon powder contributes to both sintering by liquid state and plastic phase combination to improve the strength of samples. When the Si powder additions is lower than 3.5 %, the density and strength of samples increase and porosity decrease with increasing Si powder additions. However when the Si powder additions is higher than 3.5 %, the density and strength of samples decrease and porosity increase with increasing Si powder additions. With increasing of Si additions, the residual strength of sample after thermal shocked increased and linear change rate decreased, and get to boundary value when Si additions is 4.5 %. The results also indicated that at the same sintering temperature, the sample with 3.5 % silicon powder has maximum strength.

Effect of Graphene Addition on Mechanical Properties of TiN

International Nuclear Information System (INIS)

Shon, In-Jin; Yoon, Jin-Kook; Hong, Kyung-Tae

2017-01-01

Despite of many attractive properties of TiN, the current concern about the TiN focuses on its low fracture toughness below the ductile-brittle transition temperature. To improve its mechanical properties, the approach generally utilized has been the addition of a second phase to form composites and to make nanostructured materials. In this respect, highly dense nanostructured TiN and TiN-graphene composites were obtained within two min at 1250 ℃. The grain size of TiN was reduced remarkably by the addition of graphene. The addition of graphene to TiN simultaneously improved the fracture toughness and hardness of TiN-graphene composite due to refinement of TiN and deterring crack propagation by graphene. This study demonstrates that the graphene can be an effective reinforcing agent for improved hardness and fracture toughness of TiN composites.

Effect of Graphene Addition on Mechanical Properties of TiN

Energy Technology Data Exchange (ETDEWEB)

Shon, In-Jin [Chonbuk National University, Jeonju (Korea, Republic of); Yoon, Jin-Kook; Hong, Kyung-Tae [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

2017-03-15

Despite of many attractive properties of TiN, the current concern about the TiN focuses on its low fracture toughness below the ductile-brittle transition temperature. To improve its mechanical properties, the approach generally utilized has been the addition of a second phase to form composites and to make nanostructured materials. In this respect, highly dense nanostructured TiN and TiN-graphene composites were obtained within two min at 1250 ℃. The grain size of TiN was reduced remarkably by the addition of graphene. The addition of graphene to TiN simultaneously improved the fracture toughness and hardness of TiN-graphene composite due to refinement of TiN and deterring crack propagation by graphene. This study demonstrates that the graphene can be an effective reinforcing agent for improved hardness and fracture toughness of TiN composites.

Global auroral conductance distribution due to electron and proton precipitation from IMAGE-FUV observations

Directory of Open Access Journals (Sweden)

V. Coumans

2004-04-01

Full Text Available The Far Ultraviolet (FUV imaging system on board the IMAGE satellite provides a global view of the north auroral region in three spectral channels, including the SI12 camera sensitive to Doppler shifted Lyman-α emission. FUV images are used to produce instantaneous maps of electron mean energy and energy fluxes for precipitated protons and electrons. We describe a method to calculate ionospheric Hall and Pedersen conductivities induced by auroral proton and electron ionization based on a model of interaction of auroral particles with the atmosphere. Different assumptions on the energy spectral distribution for electrons and protons are compared. Global maps of ionospheric conductances due to instantaneous observation of precipitating protons are calculated. The contribution of auroral protons in the total conductance induced by both types of auroral particles is also evaluated and the importance of proton precipitation is evaluated. This method is well adapted to analyze the time evolution of ionospheric conductances due to precipitating particles over the auroral region or in particular sectors. Results are illustrated with conductance maps of the north polar region obtained during four periods with different activity levels. It is found that the proton contribution to conductance is relatively higher during quiet periods than during substorms. The proton contribution is higher in the period before the onset and strongly decreases during the expansion phase of substorms. During a substorm which occurred on 28 April 2001, a region of strong proton precipitation is observed with SI12 around 14:00MLT at ~75° MLAT. Calculation of conductances in this sector shows that neglecting the protons contribution would produce a large error. We discuss possible effects of the proton precipitation on electron precipitation in auroral arcs. The increase in the ionospheric conductivity, induced by a former proton precipitation can reduce the potential drop

Global auroral conductance distribution due to electron and proton precipitation from IMAGE-FUV observations

Directory of Open Access Journals (Sweden)

V. Coumans

2004-04-01

Full Text Available The Far Ultraviolet (FUV imaging system on board the IMAGE satellite provides a global view of the north auroral region in three spectral channels, including the SI12 camera sensitive to Doppler shifted Lyman-α emission. FUV images are used to produce instantaneous maps of electron mean energy and energy fluxes for precipitated protons and electrons. We describe a method to calculate ionospheric Hall and Pedersen conductivities induced by auroral proton and electron ionization based on a model of interaction of auroral particles with the atmosphere. Different assumptions on the energy spectral distribution for electrons and protons are compared. Global maps of ionospheric conductances due to instantaneous observation of precipitating protons are calculated. The contribution of auroral protons in the total conductance induced by both types of auroral particles is also evaluated and the importance of proton precipitation is evaluated. This method is well adapted to analyze the time evolution of ionospheric conductances due to precipitating particles over the auroral region or in particular sectors. Results are illustrated with conductance maps of the north polar region obtained during four periods with different activity levels. It is found that the proton contribution to conductance is relatively higher during quiet periods than during substorms. The proton contribution is higher in the period before the onset and strongly decreases during the expansion phase of substorms. During a substorm which occurred on 28 April 2001, a region of strong proton precipitation is observed with SI12 around 14:00MLT at ~75° MLAT. Calculation of conductances in this sector shows that neglecting the protons contribution would produce a large error. We discuss possible effects of the proton precipitation on electron precipitation in auroral arcs. The increase in the ionospheric conductivity, induced by a former proton precipitation can reduce the potential drop

A CRITICAL ANALYSIS OF THE CONTRIBUTIONS MADE BY BRAZILIAN THESES ON THE TOPIC OF NETWORKS

Directory of Open Access Journals (Sweden)

Eduardo Jorge Branco Vieira Barcelos

2015-03-01

Full Text Available Research into Management Networks is not a dominant paradigm, which leaves it open for discussions on its statements, models and theories. This paper analyzes the contributions made by Brazilian theses on networks in the area of management, from 2004 to 2013. For this purpose, criteria that define contribution are used, for both national and international literature, resulting in a chart of 12 originality and 8 significance indicators. 23 theses were identified as dealing with the subject of networks. Content analysis was employed on explicit contributing texts and a search of the keywords for each of the 20 indicators. As the subject of networks presents multifaceted concepts, research methodologies and management models, it is beneficial to discuss and develop new approaches and contributions were expected at all three levels. The results indicate, however, that theoretical contributions were practically non-existent, methodological contributions were limited, focusing on improvements, and managerial contributions were most common, especially when focused on local networks. The results and analysis show that more research and a deeper discussion on this subject are needed. These could include coordinators and supervisors due to the pre-paradigmatic nature of the topic.

External exposure due to natural radiation (KINKI)

International Nuclear Information System (INIS)

1978-01-01

A field survey of exposure rates due to natural radiation has been conducted throughout the Kinki district of Japan during both September and October 1973. In each location, measurements of exposures at one to fifteen sites, one of where contained 5 stations at least, were made. A total of 143 sites were measured. Observations were made using a spherical ionization chamber and several scintillation surveymeters. The spherical plastic ionization chamber of which inner diameter and wall thickness are 200 mm and 3 mm (acrylate) respectively has adequate sensitivity for field survey. The chamber was used as a standard of apparatus, but it is difficult to use the apparatus in all locations only by the apparatus, so that a surveymeter with a NaI(Tl) 1''phi x 1'' scintillator was used for regular measurements. Two types of surveymeters, the one with a 2''phi x 2'' NaI(Tl) scintillator and the other with a 3''phi x 3'' NaI(Tl) scintillator, were used as auxiliary devices. Both the chamber and the surveymeter were used in 20 sites and their readings were compared for drawing a relationship between them. Practically the direct reading of the surveymeter were reduced into the corresponding value of the plastic chamber through the relationship of linear proportion. Systematic error at calibration ( 60 Co) and reading error (rodoh) of the plastic chamber were within +-6% (maximum over all error) and within +-3.5% (standard error for 6μ R/hr) respectively. Reading error of the surveymeter is about +-3% (standard error for 6μ R/hr). Measurements in open bare field were made at one meter above the ground and outdoor gamma-rays exposure rates (μ R/hr) were due to cosmic rays as well as terrestrial radiation, as it may be considered that the contribution of fallout due to artificial origin was very small. (J.P.N.)

Theoretical study on X-Ray Fluorescence Analysis: Contribution of the self-excitation phenomenon

International Nuclear Information System (INIS)

RAKOTONDRAJAONA, H.N.J.L.

1999-01-01

This work consist in setting up, firstly, fluorescence intensities due to the contribution of secondary and tertiary excitation phenomena which settle among the elements of the same sample during the analysis through X fluorescence, inspired by Sherman calculations. Secondly, we have experimentally checked these expression from the analysis of twelve samples; containing all the following elements: Iron, Copper and Zinc. The difference between the theoretical results and the experimental results has been valued from the formula of the test of χ 2 . We consider that this difference is noticeable compared to other errors due to analysis method. [fr

The C allele of JAK2 rs4495487 is an additional candidate locus that contributes to myeloproliferative neoplasm predisposition in the Japanese population

Directory of Open Access Journals (Sweden)

Ohyashiki Junko H

2012-01-01

Full Text Available Abstract Background Polycythemia vera (PV, essential thrombocythemia (ET, and primary myelofibrosis (PMF are myeloproliferative neoplasms (MPNs characterized in most cases by a unique somatic mutation, JAK2 V617F. Recent studies revealed that JAK2 V617F occurs more frequently in a specific JAK2 haplotype, named JAK2 46/1 or GGCC haplotype, which is tagged by rs10974944 (C/G and/or rs12343867 (T/C. This study examined the impact of single nucleotide polymorphisms (SNPs of the JAK2 locus on MPNs in a Japanese population. Methods We sequenced 24 JAK2 SNPs in Japanese patients with PV. We then genotyped 138 MPN patients (33 PV, 96 ET, and 9 PMF with known JAK2 mutational status and 107 controls for a novel SNP, in addition to two SNPs known to be part of the 46/1 haplotype (rs10974944 and rs12343867. Associations with risk of MPN were estimated by odds ratios and their 95% confidence intervals using logistic regression. Results A novel locus, rs4495487 (T/C, with a mutated T allele was significantly associated with PV. Similar to rs10974944 and rs12343867, rs4495487 in the JAK2 locus is significantly associated with JAK2-positive MPN. Based on the results of SNP analysis of the three JAK2 locus, we defined the "GCC genotype" as having at least one minor allele in each SNP (G allele in rs10974944, C allele in rs4495487, and C allele in rs12343867. The GCC genotype was associated with increased risk of both JAK2 V617F-positive and JAK2 V617F-negative MPN. In ET patients, leukocyte count and hemoglobin were significantly associated with JAK2 V617F, rather than the GCC genotype. In contrast, none of the JAK2 V617F-negative ET patients without the GCC genotype had thrombosis, and splenomegaly was frequently seen in this subset of ET patients. PV patients without the GCC genotype were significantly associated with high platelet count. Conclusions Our results indicate that the C allele of JAK2 rs4495487, in addition to the 46/1 haplotype, contributes

On contribution of horizontal and intra-layer convection to the formation of the Baltic Sea cold intermediate layer

Directory of Open Access Journals (Sweden)

I. Chubarenko

2010-02-01

Full Text Available Seasonal cascades down the coastal slopes and intra-layer convection are considered as the two additional mechanisms contributing to the Baltic Sea cold intermediate layer (CIL formation along with conventional seasonal vertical mixing. Field measurements are presented, reporting for the first time the possibility of denser water formation and cascading from the Baltic Sea underwater slopes, which take place under fall and winter cooling conditions and deliver waters into intermediate layer of salinity stratified deep-sea area. The presence in spring within the CIL of water with temperature below that of maximum density (Tmd and that at the local surface in winter time allows tracing its formation: it is argued that the source of the coldest waters of the Baltic CIL is early spring (March–April cascading, arising due to heating of water before reaching the Tmd. Fast increase of the open water heat content during further spring heating indicates that horizontal exchange rather than direct solar heating is responsible for that. When the surface is covered with water, heated above the Tmd, the conditions within the CIL become favorable for intralayer convection due to the presence of waters of Tmd in intermediate layer, which can explain its well-known features – the observed increase of its salinity and deepening with time.

Relative Contribution of nirK- and nirS- Bacterial Denitrifiers as Well as Fungal Denitrifiers to Nitrous Oxide Production from Dairy Manure Compost.

Science.gov (United States)

Maeda, Koki; Toyoda, Sakae; Philippot, Laurent; Hattori, Shohei; Nakajima, Keiichi; Ito, Yumi; Yoshida, Naohiro

2017-12-19

The relative contribution of fungi, bacteria, and nirS and nirK denirifiers to nitrous oxide (N 2 O) emission with unknown isotopic signature from dairy manure compost was examined by selective inhibition techniques. Chloramphenicol (CHP), cycloheximide (CYH), and diethyl dithiocarbamate (DDTC) were used to suppress the activity of bacteria, fungi, and nirK-possessing denitrifiers, respectively. Produced N 2 O were surveyed to isotopocule analysis, and its 15 N site preference (SP) and δ 18 O values were compared. Bacteria, fungi, nirS, and nirK gene abundances were compared by qPCR. The results showed that N 2 O production was strongly inhibited by CHP addition in surface pile samples (82.2%) as well as in nitrite-amended core samples (98.4%), while CYH addition did not inhibit the N 2 O production. N 2 O with unknown isotopic signature (SP = 15.3-16.2‰), accompanied by δ 18 O (19.0-26.8‰) values which were close to bacterial denitrification, was also suppressed by CHP and DDTC addition (95.3%) indicating that nirK denitrifiers were responsible for this N 2 O production despite being less abundant than nirS denitrifiers. Altogether, our results suggest that bacteria are important for N 2 O production with different SP values both from compost surface and pile core. However, further work is required to decipher whether N 2 O with unknown isotopic signature is mostly due to nirK denitrifiers that are taxonomically different from the SP-characterized strains and therefore have different SP values rather than also being interwoven with the contribution of the NO-detoxifying pathway and/or of co-denitrification.

Modelling of additive manufacturing processes: a review and classification

Science.gov (United States)

Stavropoulos, Panagiotis; Foteinopoulos, Panagis

2018-03-01

Additive manufacturing (AM) is a very promising technology; however, there are a number of open issues related to the different AM processes. The literature on modelling the existing AM processes is reviewed and classified. A categorization of the different AM processes in process groups, according to the process mechanism, has been conducted and the most important issues are stated. Suggestions are made as to which approach is more appropriate according to the key performance indicator desired to be modelled and a discussion is included as to the way that future modelling work can better contribute to improving today's AM process understanding.

Validation of transport models using additive flux minimization technique

Energy Technology Data Exchange (ETDEWEB)

Pankin, A. Y.; Kruger, S. E. [Tech-X Corporation, 5621 Arapahoe Ave., Boulder, Colorado 80303 (United States); Groebner, R. J. [General Atomics, San Diego, California 92121 (United States); Hakim, A. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States); Kritz, A. H.; Rafiq, T. [Department of Physics, Lehigh University, Bethlehem, Pennsylvania 18015 (United States)

2013-10-15

A new additive flux minimization technique is proposed for carrying out the verification and validation (V and V) of anomalous transport models. In this approach, the plasma profiles are computed in time dependent predictive simulations in which an additional effective diffusivity is varied. The goal is to obtain an optimal match between the computed and experimental profile. This new technique has several advantages over traditional V and V methods for transport models in tokamaks and takes advantage of uncertainty quantification methods developed by the applied math community. As a demonstration of its efficiency, the technique is applied to the hypothesis that the paleoclassical density transport dominates in the plasma edge region in DIII-D tokamak discharges. A simplified version of the paleoclassical model that utilizes the Spitzer resistivity for the parallel neoclassical resistivity and neglects the trapped particle effects is tested in this paper. It is shown that a contribution to density transport, in addition to the paleoclassical density transport, is needed in order to describe the experimental profiles. It is found that more additional diffusivity is needed at the top of the H-mode pedestal, and almost no additional diffusivity is needed at the pedestal bottom. The implementation of this V and V technique uses the FACETS::Core transport solver and the DAKOTA toolkit for design optimization and uncertainty quantification. The FACETS::Core solver is used for advancing the plasma density profiles. The DAKOTA toolkit is used for the optimization of plasma profiles and the computation of the additional diffusivity that is required for the predicted density profile to match the experimental profile.

Validation of transport models using additive flux minimization technique

International Nuclear Information System (INIS)

Pankin, A. Y.; Kruger, S. E.; Groebner, R. J.; Hakim, A.; Kritz, A. H.; Rafiq, T.

2013-01-01

A new additive flux minimization technique is proposed for carrying out the verification and validation (V and V) of anomalous transport models. In this approach, the plasma profiles are computed in time dependent predictive simulations in which an additional effective diffusivity is varied. The goal is to obtain an optimal match between the computed and experimental profile. This new technique has several advantages over traditional V and V methods for transport models in tokamaks and takes advantage of uncertainty quantification methods developed by the applied math community. As a demonstration of its efficiency, the technique is applied to the hypothesis that the paleoclassical density transport dominates in the plasma edge region in DIII-D tokamak discharges. A simplified version of the paleoclassical model that utilizes the Spitzer resistivity for the parallel neoclassical resistivity and neglects the trapped particle effects is tested in this paper. It is shown that a contribution to density transport, in addition to the paleoclassical density transport, is needed in order to describe the experimental profiles. It is found that more additional diffusivity is needed at the top of the H-mode pedestal, and almost no additional diffusivity is needed at the pedestal bottom. The implementation of this V and V technique uses the FACETS::Core transport solver and the DAKOTA toolkit for design optimization and uncertainty quantification. The FACETS::Core solver is used for advancing the plasma density profiles. The DAKOTA toolkit is used for the optimization of plasma profiles and the computation of the additional diffusivity that is required for the predicted density profile to match the experimental profile

Examining the Relative Contributions of Content Knowledge and Strategic Processing to Comprehension

Science.gov (United States)

Aukerman, Maren; Brown, Rachel; Mokhtari, Kouider; Valencia, Sheila; Palincsar, Annemarie

2015-01-01

The essays below were prepared following the LRA session organized by Janice Almasi entitled, "Examining the relative contributions of content knowledge and strategic processing to comprehension." What unites these essays are the personal and historical stances that each writer has taken; in addition, the essays are rich with…

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

Science.gov (United States)

Grady, Joseph E.; Halbig, Michael C.; Singh, Mrityunjay

2015-01-01

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Assessing Potential Additional PFAS Retention Processes in the Subsurface

Science.gov (United States)

Brusseau, M. L.

2017-12-01

Understanding the transport and fate of per- and poly-fluorinated alkyl substances (PFASs) in the subsurface is critical for accurate risk assessments and design of effective remedial actions. Current conceptual and mathematical models are based on an assumption that solid-phase adsorption is the sole source of retention for PFASs. However, additional retention processes may be relevant for PFAS compounds in vadose-zone systems and in source zones that contain trapped immiscible organic liquids. These include adsorption at the air-water interface, partitioning to the soil atmosphere, adsorption at the NAPL-water interface, and absorption by NAPL. A multi-process retention model is proposed to account for these potential additional sources of PFAS retardation. An initial assessment of the relative magnitudes and significance of these retention processes was conducted for three representative PFASs, perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), and 8:2 fluorotelomer alcohol (FTOH). Data collected from the literature were used to determine measured or estimated values for the relevant distribution coefficients, which were in turn used to calculate retardation factors for a representative porous medium. Adsorption at the air-water interface was shown to be a primary source of retention for PFOA and PFOS, contributing approximately 80% of total retardation. Adsorption to NAPL-water interfaces and absorption by bulk NAPL were also shown to be significant sources of retention for PFOS and PFOA. The latter process was the predominant source of retention for 8:2 FTOH, contributing 98% of total retardation. These results indicate that we may anticipate significant retention of PFASs by these additional processes. In such cases, retardation of PFASs in source areas may be significantly greater than what is typically estimated based on the standard assumption of solid-phase adsorption as the sole retention mechanism. This has significant ramifications for

Additives for high-temperature liquid lubricants

Science.gov (United States)

Lawton, Emil A.; Yavrouian, Andre H.; Repar, John

1988-01-01

A preliminary research program was conducted to demonstrate a new concept for additives to liquid lubricants. It was demonstrated that suspensions of o-phthalonitrile and a substituted 1,2-maleonitrile in mineral oil and dilute solutions of o-phthalonitrile and tetrafluoro-o-phthalonitrile extended the lifetime of bearings under boundary lubricating conditions. The solutions exhibited coefficients of friction under high loads of 0.02-0.03. These results were consistent with the hypothesis that these compounds react with the hot metal surface to form a planar lubricating film by means of a metal or metal oxide template reaction. Also, the adherence was very strong due to the chelating action of the planar macrocycles postulated to form under the experimental conditions.

High-Efficient Circuits for Ternary Addition

Directory of Open Access Journals (Sweden)

Reza Faghih Mirzaee

2014-01-01

Full Text Available New ternary adders, which are fundamental components of ternary addition, are presented in this paper. They are on the basis of a logic style which mostly generates binary signals. Therefore, static power dissipation reaches its minimum extent. Extensive different analyses are carried out to examine how efficient the new designs are. For instance, the ternary ripple adder constructed by the proposed ternary half and full adders consumes 2.33 μW less power than the one implemented by the previous adder cells. It is almost twice faster as well. Due to their unique superior characteristics for ternary circuitry, carbon nanotube field-effect transistors are used to form the novel circuits, which are entirely suitable for practical applications.

The contribution of China’s emissions to global climate forcing

Science.gov (United States)

Li, Bengang; Gasser, Thomas; Ciais, Philippe; Piao, Shilong; Tao, Shu; Balkanski, Yves; Hauglustaine, Didier; Boisier, Juan-Pablo; Chen, Zhuo; Huang, Mengtian; Li, Laurent Zhaoxin; Li, Yue; Liu, Hongyan; Liu, Junfeng; Peng, Shushi; Shen, Zehao; Sun, Zhenzhong; Wang, Rong; Wang, Tao; Yin, Guodong; Yin, Yi; Zeng, Hui; Zeng, Zhenzhong; Zhou, Feng

2016-03-01

Knowledge of the contribution that individual countries have made to global radiative forcing is important to the implementation of the agreement on “common but differentiated responsibilities” reached by the United Nations Framework Convention on Climate Change. Over the past three decades, China has experienced rapid economic development, accompanied by increased emission of greenhouse gases, ozone precursors and aerosols, but the magnitude of the associated radiative forcing has remained unclear. Here we use a global coupled biogeochemistry-climate model and a chemistry and transport model to quantify China’s present-day contribution to global radiative forcing due to well-mixed greenhouse gases, short-lived atmospheric climate forcers and land-use-induced regional surface albedo changes. We find that China contributes 10% ± 4% of the current global radiative forcing. China’s relative contribution to the positive (warming) component of global radiative forcing, mainly induced by well-mixed greenhouse gases and black carbon aerosols, is 12% ± 2%. Its relative contribution to the negative (cooling) component is 15% ± 6%, dominated by the effect of sulfate and nitrate aerosols. China’s strongest contributions are 0.16 ± 0.02 watts per square metre for CO2 from fossil fuel burning, 0.13 ± 0.05 watts per square metre for CH4, -0.11 ± 0.05 watts per square metre for sulfate aerosols, and 0.09 ± 0.06 watts per square metre for black carbon aerosols. China’s eventual goal of improving air quality will result in changes in radiative forcing in the coming years: a reduction of sulfur dioxide emissions would drive a faster future warming, unless offset by larger reductions of radiative forcing from well-mixed greenhouse gases and black carbon.

Effect of copper addition and section thickness on the mechanical and physical properties of grey cast iron

International Nuclear Information System (INIS)

Malik, F.A.; Zahid, M.; Hassan, M.A.; Sheikh, M.A.; Alam, S.; Qazi, M.A.

1995-01-01

Copper is a graphitizer at the stage of solidification and it acts as antiferritizer during transformation cooling range. Due to this, copper additions to grey cast iron prevent at formation of free ferrite in heavy sections. It also reduces the chilling in thin sections, therefore uniform structure is imparted to grey iron by the copper addition. This gives the appropriate strength and hardness properties to grey iron. Thus copper addition gives certain advantages in relation to the machinability and wear resistance which are important for many engineering properties requires by high duty cast iron. The application of copper as allying element is acceptable due to its price and availability as compared to other alloying elements. (author)

Addition of PM2.5 into the National Ambient Air Quality Standards of China and the Contribution to Air Pollution Control: The Case Study of Wuhan, China

Science.gov (United States)

You, Mingqing

2014-01-01

PM2.5 has gradually become a major environmental problem of China with its rapid economic development, urbanization, and increasing of motor vehicles. Findings and awareness of serious PM2.5 pollution make the PM2.5 a new criterion pollutant of the Chinese National Ambient Air Quality Standard (NAAQS) revised in 2012. The 2012 NAAQS sets the PM2.5 concentrate limitation with the 24-hour average value and the annual mean value. Wuhan is quite typical among central and southern China in climate, economy, development level, and energy consumption. The data are cited from the official website of Wuhan Environmental Protection Bureau and cover the period from 1 January to 30 June 2013. The data definitely confirm the existence of serious PM2.5 pollution in Wuhan and indicate that the addition of PM2.5 as a criterion pollutant significantly brings down the attainment rate of air quality. The example of Wuhan reveals that local governments should take measures to reduce the emission of PM2.5 if it affects the attainment rate and the performance evaluation value of air quality. The main contribution of 2012 NAAQS is that it brings down the attainment rate of the air quality and forces local governmental officials to take the measures accordingly. PMID:24982994

Addition of PM 2.5 into the national ambient air quality standards of China and the contribution to air pollution control: the case study of Wuhan, China.

Science.gov (United States)

You, Mingqing

2014-01-01

PM2.5 has gradually become a major environmental problem of China with its rapid economic development, urbanization, and increasing of motor vehicles. Findings and awareness of serious PM2.5 pollution make the PM2.5 a new criterion pollutant of the Chinese National Ambient Air Quality Standard (NAAQS) revised in 2012. The 2012 NAAQS sets the PM2.5 concentrate limitation with the 24-hour average value and the annual mean value. Wuhan is quite typical among central and southern China in climate, economy, development level, and energy consumption. The data are cited from the official website of Wuhan Environmental Protection Bureau and cover the period from 1 January to 30 June 2013. The data definitely confirm the existence of serious PM2.5 pollution in Wuhan and indicate that the addition of PM2.5 as a criterion pollutant significantly brings down the attainment rate of air quality. The example of Wuhan reveals that local governments should take measures to reduce the emission of PM2.5 if it affects the attainment rate and the performance evaluation value of air quality. The main contribution of 2012 NAAQS is that it brings down the attainment rate of the air quality and forces local governmental officials to take the measures accordingly.

Addition of PM2.5 into the National Ambient Air Quality Standards of China and the Contribution to Air Pollution Control: The Case Study of Wuhan, China

Directory of Open Access Journals (Sweden)

Mingqing You

2014-01-01

Full Text Available PM2.5 has gradually become a major environmental problem of China with its rapid economic development, urbanization, and increasing of motor vehicles. Findings and awareness of serious PM2.5 pollution make the PM2.5 a new criterion pollutant of the Chinese National Ambient Air Quality Standard (NAAQS revised in 2012. The 2012 NAAQS sets the PM2.5 concentrate limitation with the 24-hour average value and the annual mean value. Wuhan is quite typical among central and southern China in climate, economy, development level, and energy consumption. The data are cited from the official website of Wuhan Environmental Protection Bureau and cover the period from 1 January to 30 June 2013. The data definitely confirm the existence of serious PM2.5 pollution in Wuhan and indicate that the addition of PM2.5 as a criterion pollutant significantly brings down the attainment rate of air quality. The example of Wuhan reveals that local governments should take measures to reduce the emission of PM2.5 if it affects the attainment rate and the performance evaluation value of air quality. The main contribution of 2012 NAAQS is that it brings down the attainment rate of the air quality and forces local governmental officials to take the measures accordingly.

Contribution of the 'safeguarded' to the development of safeguards

International Nuclear Information System (INIS)

Anderson, A.R.

1977-01-01

The development of an efficient system of international safeguards requires close and detailed interaction between the safeguarding authority and those being safeguarded, i.e. the plant operator and the State System to which he belongs. Such interaction is found in other control systems but the degree of international collaboration involved in safeguards is perhaps unique and it is valuable to review and analyse the contributions which have arisen from prudent management considerations. The familiar ''Blue Book'' (INFCIRC 153) recognizes clearly the need for an effective State's System of accounting for and control of nuclear materials as a necessary pre-requisite for the development and implementation of an effective IAEA system of safeguards. It is therefore helpful to summarize the relevant contributions from the 'safeguarded' in terms of the components of the State's System specified in paragraph 32 of the Blue Book. This paper reviews the continuing contributions stemming from plant and national experience, with particular emphasis on the development of measurement systems and physical inventory procedures relevant to safeguards. Attention is also drawn to those areas where the specific objectives of IAEA Safeguards lead to requirements additional to those required for management purposes. (author)

Current use and potential of additive manufacturing for optical applications

Science.gov (United States)

Brunelle, Matthew; Ferralli, Ian; Whitsitt, Rebecca; Medicus, Kate

2017-10-01

Additive manufacturing, or 3D printing, has become widely used in recent years for the creation of both prototype and end-use parts. Because the parts are created in a layer-by-layer manner, the flexibility of additive manufacturing is unparalleled and has opened the design space to enable features like undercuts and internal channels which cannot exist on traditional, subtractively manufactured parts. This flexibility can also be leveraged for optical applications. This paper outlines some of the current uses of 3D printing in the optical manufacturing process at Optimax. Several materials and additive technologies are utilized, including polymer printing through fused deposition modeling, which creates parts by depositing a softened thermoplastic filament in a layerwise fashion. Stereolithography, which uses light to cure layers of a photopolymer resin, will also be discussed. These technologies are used to manufacture functional prototypes, fixtures, sealed housings, and other components. Additionally, metal printing through selective laser melting, which uses a laser to melt metal powder layers into a dense solid, will be discussed due to the potential to manufacture thermally stable opticalmechanical assembly frameworks and functional optics. Examples of several additively manufactured optical components will be shown.

Sensory Profile and Consumer Acceptability of Prebiotic White Chocolate with Sucrose Substitutes and the Addition of Goji Berry (Lycium barbarum).

Science.gov (United States)

Morais Ferreira, Janaína Madruga; Azevedo, Bruna Marcacini; Luccas, Valdecir; Bolini, Helena Maria André

2017-03-01

Functional food is a product containing nutrients that provide health benefits beyond basic nutrition. The objective of the present study was to evaluate the descriptive sensory profile and consumers' acceptance of functional (prebiotic) white chocolates with and without the addition of an antioxidant source (goji berry [GB]) and sucrose replacement. The descriptive sensory profile was determined by quantitative descriptive analysis (QDA) with trained assessors (n = 12), and the acceptance test was performed with 120 consumers. The correlation of descriptive and hedonic data was determined by partial least squares (PLS). The results of QDA indicated that GB reduces the perception of most aroma and flavor attributes, and enhances the bitter taste, bitter aftertaste, astringency, and most of the texture attributes. The consumers' acceptance of the chocolates was positive for all sensory characteristics, with acceptance scores above 6 on a 9-point scale. According to the PLS regression analysis, the descriptors cream color and cocoa butter flavor contributed positively to the acceptance of functional white chocolates. Therefore, prebiotic white chocolate with or without the addition of GB is innovative and can attract consumers, due to its functional properties, being a promising alternative for the food industry. © 2017 Institute of Food Technologists®.

Supergravity contributions to inflation in models with non-minimal coupling to gravity

Energy Technology Data Exchange (ETDEWEB)

Das, Kumar; Dutta, Koushik [Theory Division, Saha Institute of Nuclear Physics, 1/AF Saltlake, Kolkata 700064 (India); Domcke, Valerie, E-mail: kumar.das@saha.ac.in, E-mail: valerie.domcke@apc.univ-paris7.fr, E-mail: koushik.dutta@saha.ac.in [AstroParticule et Cosmologie (APC), Paris Centre for Cosmological Physics (PCCP), Université Paris Diderot, 75013 Paris (France)

2017-03-01

This paper provides a systematic study of supergravity contributions relevant for inflationary model building in Jordan frame supergravity. In this framework, canonical kinetic terms in the Jordan frame result in the separation of the Jordan frame scalar potential into a tree-level term and a supergravity contribution which is potentially dangerous for sustaining inflation. We show that if the vacuum energy necessary for driving inflation originates dominantly from the F-term of an auxiliary field (i.e. not the inflaton), the supergravity corrections to the Jordan frame scalar potential are generically suppressed. Moreover, these supergravity contributions identically vanish if the superpotential vanishes along the inflationary trajectory. On the other hand, if the F-term associated with the inflaton dominates the vacuum energy, the supergravity contributions are generically comparable to the globally supersymmetric contributions. In addition, the non-minimal coupling to gravity inherent to Jordan frame supergravity significantly impacts the inflationary model depending on the size and sign of this coupling. We discuss the phenomenology of some representative inflationary models, and point out the relation to the recently much discussed cosmological 'attractor' models.

Supergravity contributions to inflation in models with non-minimal coupling to gravity

International Nuclear Information System (INIS)

Das, Kumar; Dutta, Koushik; Domcke, Valerie

2017-01-01

This paper provides a systematic study of supergravity contributions relevant for inflationary model building in Jordan frame supergravity. In this framework, canonical kinetic terms in the Jordan frame result in the separation of the Jordan frame scalar potential into a tree-level term and a supergravity contribution which is potentially dangerous for sustaining inflation. We show that if the vacuum energy necessary for driving inflation originates dominantly from the F-term of an auxiliary field (i.e. not the inflaton), the supergravity corrections to the Jordan frame scalar potential are generically suppressed. Moreover, these supergravity contributions identically vanish if the superpotential vanishes along the inflationary trajectory. On the other hand, if the F-term associated with the inflaton dominates the vacuum energy, the supergravity contributions are generically comparable to the globally supersymmetric contributions. In addition, the non-minimal coupling to gravity inherent to Jordan frame supergravity significantly impacts the inflationary model depending on the size and sign of this coupling. We discuss the phenomenology of some representative inflationary models, and point out the relation to the recently much discussed cosmological 'attractor' models.

Inspection of additive manufactured parts using laser ultrasonics

Science.gov (United States)

Lévesque, D.; Bescond, C.; Lord, M.; Cao, X.; Wanjara, P.; Monchalin, J.-P.

2016-02-01

Additive manufacturing is a novel technology of high importance for global sustainability of resources. As additive manufacturing involves typically layer-by-layer fusion of the feedstock (wire or powder), an important characteristic of the fabricated metallic structural parts, such as those used in aero-engines, is the performance, which is highly related to the presence of defects, such as cracks, lack of fusion or bonding between layers, and porosity. For this purpose, laser ultrasonics is very attractive due to its non-contact nature and is especially suited for the analysis of parts of complex geometries. In addition, the technique is well adapted to online implementation and real-time measurement during the manufacturing process. The inspection can be performed from either the top deposited layer or the underside of the substrate and the defects can be visualized using laser ultrasonics combined with the synthetic aperture focusing technique (SAFT). In this work, a variety of results obtained off-line on INCONEL® 718 and Ti-6Al-4V coupons that were manufactured using laser powder, laser wire, or electron beam wire deposition are reported and most defects detected were further confirmed by X-ray micro-computed tomography.

A treatment of expansive soil using different additives

Directory of Open Access Journals (Sweden)

Bestun J. Nareeman

2010-11-01

Full Text Available There are many factors that govern the expansion behavior of soil. The primary factors are a change in water contentand the amount and type of clay size particles in the soil. Other important factors affecting the expansion behavior include the typeof soil (natural or fill, condition of the soil in terms of dry density and moisture content, magnitude of the surcharge pressure,and amount of no expansive material such as gravel or cobble size particles.In this paper, a swelling soil from the site Hamamuk earth dam, which is located in Koya town north of Iraq, is treated by fourtypes of additives; cement, steel fibers, gasoline fuel and injection by cement grout.The treatment of the expansive soil with 5 % of cement or steel fibers or the injection with cement grout revealed a betterimprovement while 4 % of gasoline oil is sufficient to reveal the optimum treatment by this material. The angle of internal friction is notaffected by the treatment while the cohesion between particles is slightly affected by these additives due to a change in the adhesionbetween the additive and soil particles.

Influence of Additives on Reinforced Concrete Durability

Directory of Open Access Journals (Sweden)

Neverkovica Darja

2014-12-01

Full Text Available The article presents the results of the research on carbonation and chloride induced corrosion mechanisms in reinforced concrete structures, based on three commercially available concrete admixtures: Xypex Admix C-1000, Penetron Admix and Elkem Microsilica. Carbonation takes place due to carbon dioxide diffusion, which in the required amount is present in the air. Chlorides penetrate concrete in case of the use of deicing salt or structure exploitation in marine atmosphere. Based on the implemented research, Elkem Microsilica is the recommended additive for the use in aggressive environmental conditions. Use of Xypex Admix C-1000 and Penetron Admix have only average resistance to the aggressive environmental impact.

Percentage-based Author Contribution Index: a universal measure of author contribution to scientific articles.

Science.gov (United States)

Boyer, Stéphane; Ikeda, Takayoshi; Lefort, Marie-Caroline; Malumbres-Olarte, Jagoba; Schmidt, Jason M

2017-01-01

Deciphering the amount of work provided by different co-authors of a scientific paper has been a recurrent problem in science. Despite the myriad of metrics available, the scientific community still largely relies on the position in the list of authors to evaluate contributions, a metric that attributes subjective and unfounded credit to co-authors. We propose an easy to apply, universally comparable and fair metric to measure and report co-authors contribution in the scientific literature. The proposed Author Contribution Index (ACI) is based on contribution percentages provided by the authors, preferably at the time of submission. Researchers can use ACI to compare the contributions of different authors, describe the contribution profile of a particular researcher or analyse how contribution changes through time. We provide such an analysis based on contribution percentages provided by 97 scientists from the field of ecology who voluntarily responded to an online anonymous survey. ACI is simple to understand and to implement because it is based solely on percentage contributions and the number of co-authors. It provides a continuous score that reflects the contribution of one author as compared to the average contribution of all other authors. For example, ACI(i) = 3, means that author i contributed three times more than what the other authors contributed on average. Our analysis comprised 836 papers published in 2014-2016 and revealed patterns of ACI values that relate to career advancement. There are many examples of author contribution indices that have been proposed but none has really been adopted by scientific journals. Many of the proposed solutions are either too complicated, not accurate enough or not comparable across articles, authors and disciplines. The author contribution index presented here addresses these three major issues and has the potential to contribute to more transparency in the science literature. If adopted by scientific journals, it

Pancreatic alpha-cell dysfunction contributes to the disruption of glucose homeostasis and compensatory insulin hypersecretion in glucocorticoid-treated rats.

Directory of Open Access Journals (Sweden)

Alex Rafacho

Full Text Available Glucocorticoid (GC-based therapies can cause insulin resistance (IR, glucose intolerance, hyperglycemia and, occasionally, overt diabetes. Understanding the mechanisms behind these metabolic disorders could improve the management of glucose homeostasis in patients undergoing GC treatment. For this purpose, adult rats were treated with a daily injection of dexamethasone (1 mg/kg b.w., i.p. (DEX or saline as a control for 5 consecutive days. The DEX rats developed IR, augmented glycemia, hyperinsulinemia and hyperglucagonemia. Treatment of the DEX rats with a glucagon receptor antagonist normalized their blood glucose level. The characteristic inhibitory effect of glucose on glucagon secretion was impaired in the islets of the DEX rats, while no direct effects were found on α-cells in islets that were incubated with DEX in vitro. A higher proportion of docked secretory granules was found in the DEX α-cells as well as a trend towards increased α-cell mass. Additionally, insulin secretion in the presence of glucagon was augmented in the islets of the DEX rats, which was most likely due to their higher glucagon receptor content. We also found that the enzyme 11βHSD-1, which participates in GC metabolism, contributed to the insulin hypersecretion in the DEX rats under basal glucose conditions. Altogether, we showed that GC treatment induces hyperglucagonemia, which contributes to an imbalance in glucose homeostasis and compensatory β-cell hypersecretion. This hyperglucagonemia may result from altered α-cell function and, likely, α-cell mass. Additionally, blockage of the glucagon receptor seems to be effective in preventing the elevation in blood glucose levels induced by GC administration.

Relative contributions of Vibrio polysaccharide and quorum sensing to the resistance of Vibrio cholerae to predation by heterotrophic protists.

Directory of Open Access Journals (Sweden)

Shuyang Sun

Full Text Available Protozoan grazing is a major mortality factor faced by bacteria in the environment. Vibrio cholerae, the causative agent of the disease cholera, is a natural inhabitant of aquatic ecosystems, and its survival depends on its ability to respond to stresses, such as predation by heterotrophic protists. Previous results show that grazing pressure induces biofilm formation and enhances a smooth to rugose morphotypic shift, due to increased expression of Vibrio polysaccharide (VPS. In addition to negatively controlling vps genes, the global quorum sensing (QS regulator, HapR, plays a role in grazing resistance as the ΔhapR strain is efficiently consumed while the wild type (WT is not. Here, the relative and combined contributions of VPS and QS to grazing resistance were investigated by exposing VPS and HapR mutants and double mutants in VPS and HapR encoding genes at different phases of biofilm development to amoeboid and flagellate grazers. Data show that the WT biofilms were grazing resistant, the VPS mutants were less resistant than the WT strain, but more resistant than the QS mutant strain, and that QS contributes to grazing resistance mainly in mature biofilms. In addition, grazing effects on biofilms of mixed WT and QS mutant strains were investigated. The competitive fitness of each strain in mixed biofilms was determined by CFU and microscopy. Data show that protozoa selectively grazed the QS mutant in mixed biofilms, resulting in changes in the composition of the mixed community. A small proportion of QS mutant cells which comprised 4% of the mixed biofilm biovolume were embedded in grazing resistant WT microcolonies and shielded from predation, indicating the existence of associational protection in mixed biofilms.

26 CFR 31.3302(b)-2 - Proof of additional credit under section 3302(b).

Science.gov (United States)

2010-04-01

... year to any person having individuals in his employ; and (b) To the district director a certificate of...) showing for the taxpayer— (1) The total remuneration with respect to which contributions were required to... Commissioner or the district director may deem necessary to establish the right to the additional credit...

Economic trade-offs of additive manufacturing integration in injection moulding process chain

DEFF Research Database (Denmark)

Charalambis, Alessandro; Kerbache, Laoucine; Tosello, Guido

2017-01-01

Additive Manufacturing has emerged as an innovative set of novel technologies capable of replacing established manufacturing processes due to fabrication of highly complex parts and its continuous improvements of efficiency and cost effectiveness. This study is based on the idea that through...... the creation of synergies between additive and conventional manufacturing technologies it is possible to achieve greater cost advantages and operational benefits than by substituting injection moulding with additive manufacturing. The analysis presented explores the cost advantages that can be secured when...... additive manufacturing is used to support the fabrication of mould inserts for the product development phase of the injection moulding process chain. This study shows that fabrication of soft tooling by mean of AM is economically convenient with a cost reduction between 80% and 90%. Break-even points...

Internal additive noise effects in stochastic resonance using organic field effect transistor

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Yoshiharu; Asakawa, Naoki [Division of Molecular Science, Graduate School of Science and Technology, Gunma University, 1-5-1 Tenjin-cho, Kiryu, Gunma 376-8515 (Japan); Matsubara, Kiyohiko [KOOROGI LLC, 6-1585-1-B Sakaino-cho, Kiryu, Gunma 376-0002 (Japan)

2016-08-29

Stochastic resonance phenomenon was observed in organic field effect transistor using poly(3-hexylthiophene), which enhances performance of signal transmission with application of noise. The enhancement of correlation coefficient between the input and output signals was low, and the variation of correlation coefficient was not remarkable with respect to the intensity of external noise, which was due to the existence of internal additive noise following the nonlinear threshold response. In other words, internal additive noise plays a positive role on the capability of approximately constant signal transmission regardless of noise intensity, which can be said “homeostatic” behavior or “noise robustness” against external noise. Furthermore, internal additive noise causes emergence of the stochastic resonance effect even on the threshold unit without internal additive noise on which the correlation coefficient usually decreases monotonically.

Scheduling Additional Train Unit Services on Rail Transit Lines

OpenAIRE

Zhibin Jiang; Yuyan Tan; Özgür Yalçınkaya

2014-01-01

This paper deals with the problem of scheduling additional train unit (TU) services in a double parallel rail transit line, and a mixed integer programming (MIP) model is formulated for integration strategies of new trains connected by TUs with the objective of obtaining higher frequencies in some special sections and special time periods due to mass passenger volumes. We took timetable scheduling and TUs scheduling as an integrated optimization model with two objectives: minimizing travel ti...

Friction Stir Additive Manufacturing: Route to High Structural Performance

Science.gov (United States)

Palanivel, S.; Sidhar, H.; Mishra, R. S.

2015-03-01

Aerospace and automotive industries provide the next big opportunities for additive manufacturing. Currently, the additive industry is confronted with four major challenges that have been identified in this article. These challenges need to be addressed for the additive technologies to march into new frontiers and create additional markets. Specific potential success in the transportation sectors is dependent on the ability to manufacture complicated structures with high performance. Most of the techniques used for metal-based additive manufacturing are fusion based because of their ability to fulfill the computer-aided design to component vision. Although these techniques aid in fabrication of complex shapes, achieving high structural performance is a key problem due to the liquid-solid phase transformation. In this article, friction stir additive manufacturing (FSAM) is shown as a potential solid-state process for attaining high-performance lightweight alloys for simpler geometrical applications. To illustrate FSAM as a high-performance route, manufactured builds of Mg-4Y-3Nd and AA5083 are shown as examples. In the Mg-based alloy, an average hardness of 120 HV was achieved in the built structure and was significantly higher than that of the base material (97 HV). Similarly for the Al-based alloy, compared with the base hardness of 88 HV, the average built hardness was 104 HV. A potential application of FSAM is illustrated by taking an example of a simple stiffener assembly.

Diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams

Directory of Open Access Journals (Sweden)

Katherine M. Byrd

2015-04-01

Full Text Available The conjugate addition reaction has been a useful tool in the formation of carbon–carbon bonds. The utility of this reaction has been demonstrated in the synthesis of many natural products, materials, and pharmacological agents. In the last three decades, there has been a significant increase in the development of asymmetric variants of this reaction. Unfortunately, conjugate addition reactions using α,β-unsaturated amides and lactams remain underdeveloped due to their inherently low reactivity. This review highlights the work that has been done on both diastereoselective and enantioselective conjugate addition reactions utilizing α,β-unsaturated amides and lactams.

On thermal gravitational contribution to particle production and dark matter

Directory of Open Access Journals (Sweden)

Yong Tang

2017-11-01

Full Text Available We investigate the particle production from thermal gravitational annihilation in the very early universe, which is an important contribution for particles that might not be in thermal equilibrium or/and might only have gravitational interaction, such as dark matter (DM. For particles with spin 0,1/2 and 1 we calculate the relevant cross sections through gravitational annihilation and give the analytic formulas with full mass-dependent terms. We find that DM with mass between TeV and 1016 GeV could have the relic abundance that fits the observation, with small dependence on its spin. We also discuss the effects of gravitational annihilation from inflatons. Interestingly, contributions from inflatons could be dominant and have the same power dependence on Hubble parameter of inflation as that from vacuum fluctuation. Also, fermion production from inflaton, in comparison to boson, is suppressed by its mass due to helicity selection.

Social Contributions in Romania

Directory of Open Access Journals (Sweden)

Attila Gyorgy

2012-12-01

Full Text Available Social contributions have an important impact on payroll policy. Also, social contributions represent a significant budgetary revenue item which can be viewed at the edge between taxation and insurance. Social contributions in Romania experienced many changes which ended in 2008. Nowadays, they are within a long transaction period towards partial externalization of the insurance activity to privately managed funds. The aim of this paper is to analyse the homogeneity of Romanian social security public scheme using annual data extracted from 2002-2009.The main findings reveal that social contributions reached the pinnacle of diversification, being too many, some of them with a small contribution rates; fiscal reforms which reduced contribution rates advantaged employers, and state will be interested to externalize this activity as far private sector will be able to assume this responsibility and the budgetary effects are acceptable for the public finance.

Exchange current contributions to isoscalar magnetic moments

International Nuclear Information System (INIS)

Arima, A.; Bentz, W.; Ichii, S.

1986-01-01

In this work the authors have investigated two recent suggestions which indicated appreciable exchange current contributions to isoscalar magnetic moments. On account of gauge invariance the authors found that in both treatments certain important terms seem to be omitted. The authors then performed explicit calculations using a one-boson exchange model for the exchange current operator. The authors found that the results are sensitive to the ratio of coupling constants g/sub σNN///g/sub ωNN/. Due to this fact it is difficult to draw quantitative conclusions. In the present model calculation the authors found that both g/sub s/(0) and g/sub 1//sup 0/ are enhanced by about 3% to 4%, resulting in non-negligible corrections to isoscalar magnetic moments

Global climate: Methane contribution to greenhouse effect

International Nuclear Information System (INIS)

Metalli, P.

1992-01-01

The global atmospheric concentration of methane greatly contributes to the severity of the greenhouse effect. It has been estimated that this concentration, due mainly to human activities, is growing at the rate of roughly 1.1% per year. Environmental scientists suggest that a reduction, even as small as 10%, in global methane emissions would be enough to curtail the hypothetical global warning scenarios forecasted for the up-coming century. Through the recovery of methane from municipal and farm wastes, as well as, through the control of methane leaks and dispersions in coal mining and petrochemical processes, substantial progress towards the abatement of greenhouse gas effects could be achieved without having to resort to economically detrimental limitations on the use of fossil fuels

Emission Sectoral Contributions of Foreign Emissions to Particulate Matter Concentrations over South Korea

Science.gov (United States)

Kim, E.; Kim, S.; Kim, H. C.; Kim, B. U.; Cho, J. H.; Woo, J. H.

2017-12-01

In this study, we investigated the contributions of major emission source categories located upwind of South Korea to Particulate Matter (PM) in South Korea. In general, air quality in South Korea is affected by anthropogenic air pollutants emitted from foreign countries including China. Some studies reported that foreign emissions contributed 50 % of annual surface PM total mass concentrations in the Seoul Metropolitan Area, South Korea in 2014. Previous studies examined PM contributions of foreign emissions from all sectors considering meteorological variations. However, little studies conducted to assess contributions of specific foreign source categories. Therefore, we attempted to estimate sectoral contributions of foreign emissions from China to South Korea PM using our air quality forecasting system. We used Model Inter-Comparison Study in Asia 2010 for foreign emissions and Clean Air Policy Support System 2010 emission inventories for domestic emissions. To quantify contributions of major emission sectors to South Korea PM, we applied the Community Multi-scale Air Quality system with brute force method by perturbing emissions from industrial, residential, fossil-fuel power plants, transportation, and agriculture sectors in China. We noted that industrial sector was pre-dominant over the region except during cold season for primary PMs when residential emissions drastically increase due to heating demand. This study will benefit ensemble air quality forecasting and refined control strategy design by providing quantitative assessment on seasonal contributions of foreign emissions from major source categories.

Gut Microbiota: a contributing factor to obesity

Directory of Open Access Journals (Sweden)

Steve M Harakeh

2016-08-01

Full Text Available Obesity, a global epidemic of the modern era, is a risk factor for cardiovascular diseases (CVD and diabetes. The pervasiveness of obesity and overweight in both developed as well as developing populations is on the rise and placing a huge burden on health and economic resources. Consequently, research to control this emerging epidemic is of utmost importance. Recently, host interactions with their resident gut microbiota (GM have been reported to be involved in the pathogenesis of many metabolic diseases, including obesity, diabetes, and CVD. Around 1014 microorganisms reside within the lower human intestine and many of these 1014microorganisms have developed mutualistic or commensal associations with the host and actively involved in many physiological processes of the host. However, dysbiosis (altered gut microbial composition with other predisposing genetic and environmental factors, may contribute to host metabolic disorders resulting in many ailments. Therefore, delineating the role of GM as a contributing factor to obesity is the main objective of this review.Obesity research, as a field is expanding rapidly due to major advances in nutrigenomics, metabolomics, RNA silencing, epigenetics and other disciplines that may result in the emergence of new technologies and methods to better interpret causal relationships between microbiota and obesity.

Gut Microbiota: A Contributing Factor to Obesity

Science.gov (United States)

Harakeh, Steve M.; Khan, Imran; Kumosani, Taha; Barbour, Elie; Almasaudi, Saad B.; Bahijri, Suhad M.; Alfadul, Sulaiman M.; Ajabnoor, Ghada M. A.; Azhar, Esam I.

2016-01-01

Obesity, a global epidemic of the modern era, is a risk factor for cardiovascular diseases (CVD) and diabetes. The pervasiveness of obesity and overweight in both developed as well as developing populations is on the rise and placing a huge burden on health and economic resources. Consequently, research to control this emerging epidemic is of utmost importance. Recently, host interactions with their resident gut microbiota (GM) have been reported to be involved in the pathogenesis of many metabolic diseases, including obesity, diabetes, and CVD. Around 1014 microorganisms reside within the lower human intestine and many of these 1014 microorganisms have developed mutualistic or commensal associations with the host and actively involved in many physiological processes of the host. However, dysbiosis (altered gut microbial composition) with other predisposing genetic and environmental factors, may contribute to host metabolic disorders resulting in many ailments. Therefore, delineating the role of GM as a contributing factor to obesity is the main objective of this review. Obesity research, as a field is expanding rapidly due to major advances in nutrigenomics, metabolomics, RNA silencing, epigenetics, and other disciplines that may result in the emergence of new technologies and methods to better interpret causal relationships between microbiota and obesity. PMID:27625997

Additive recovery at lateral boundaries of grains under electronic exposure

International Nuclear Information System (INIS)

Plotnikov, S.V.; Postnikov, D.V.

2000-01-01

The experimental investigation of additive re-distribution under electronic beam revealed a recovery of the additive at grain boundaries. Additive accumulation mainly takes place at the boundaries that are perpendicular to material surface, whereas there is no an observed recovery of additive at the boundaries that are parallel to the surface. To construe the processes of additive recovery at grain boundaries, we may use the kinetic diffusion equation describing the mass transfer processes in the presence of temperature gradients and non-equilibrium vacancies. The additive recovery is caused by spot fault gradients near the grain boundary. The grain boundary is an intensive run-off region of vacancies. Therefore, the average vacancy distribution profile near the grain boundary changes its pattern. The above case indicates that there are two additive fluxes. One of them is vectored perpendicular to the surface, and the other one is parallel to it, i.e. it is vectored to the grain boundary. A study of the perpendicular and parallel boundaries shows that there is no additive settling at the boundaries that are parallel to the surface, since the general flux is vectored to the parallel boundaries. There is no such kind of phenomenon at the grain boundaries that are perpendicular to the surface. Besides, the perpendicular boundaries are more effective run-off regions for vacancies, since there is a slower build-up of the region with vacancies due to displacement of the vacancies to the surface

Uric acid contributes greatly to hepatic antioxidant capacity besides protein.

Science.gov (United States)

Mikami, T; Sorimachi, M

2017-12-20

Uric acid is the end-product of purine nucleotide metabolism and an increase in uric acid concentration in the body results in hyperuricemia, ultimately leading to gout. However, uric acid is a potent antioxidant and interacts with reactive oxygen species (ROS) to be non-enzymatically converted to allantoin. Uric acid accounts for approximately 60 % of antioxidant capacity in the plasma; however, its contribution to tissue antioxidant capacity is unknown. In this study, the contribution of uric acid to tissue antioxidant capacity and its conversion to allantoin by scavenging ROS in tissue were examined. The results showed that a decrease in hepatic uric acid content via allopurinol administration significantly reduced hepatic total-radical trapping antioxidant parameter (TRAP) content in protein-free cytosol. Additionally, treating protein-free cytosol with uricase led to a further reduction of hepatic TRAP content. Allantoin was also detected in the solution containing protein-free cytosol that reacted with ROS. These findings suggest that in the absence of protein, uric acid contributes greatly to antioxidant capacity in the liver, where uric acid is converted to allantoin by scavenging ROS.

Contribution of honeybee drones of different age to colonial thermoregulation.

Science.gov (United States)

Kovac, Helmut; Stabentheiner, Anton; Brodschneider, Robert

2009-01-01

In addition to honeybee workers, drones also contribute to colonial thermoregulation. We show the drones' contribution to thermoregulation at 5 different experimental temperatures ranging from 15-34 °C. The frequency and the degree of endothermy depended on the drones' local ambient temperature and age. Location on brood or non-brood areas had no influence. The frequency of endothermic drones and the intensity of endothermy increased with decreasing temperature. 30% of drones of 8 days and older heated their thorax by more than 1 °C above the abdomen. The youngest drones (0-2 days) did not exceed this level of endothermy. Though young drones were less often engaged in active heat production, their contribution to brood warming was not insignificant because their abundance on the brood nest was 3.5 times higher than that of the oldest drones (≥13 days). Results suggest that the stimulus for the drones' increased frequency of heating at low experimental temperatures was their low local ambient air and/or comb temperature.

Contribution of honeybee drones of different age to colonial thermoregulation*

Science.gov (United States)

Kovac, Helmut; Stabentheiner, Anton; Brodschneider, Robert

2011-01-01

In addition to honeybee workers, drones also contribute to colonial thermoregulation. We show the drones’ contribution to thermoregulation at 5 different experimental temperatures ranging from 15–34 °C. The frequency and the degree of endothermy depended on the drones’ local ambient temperature and age. Location on brood or non-brood areas had no influence. The frequency of endothermic drones and the intensity of endothermy increased with decreasing temperature. 30% of drones of 8 days and older heated their thorax by more than 1 °C above the abdomen. The youngest drones (0–2 days) did not exceed this level of endothermy. Though young drones were less often engaged in active heat production, their contribution to brood warming was not insignificant because their abundance on the brood nest was 3.5 times higher than that of the oldest drones (≥13 days). Results suggest that the stimulus for the drones’ increased frequency of heating at low experimental temperatures was their low local ambient air and/or comb temperature. PMID:22140282

Fluorescent intensifying screens: contribution of secondary X-rays

International Nuclear Information System (INIS)

Barroso, R.C.; Goncalves, O.D.; Eichler, J.; Lopes, R.T.; Cardoso, S.C.

1996-01-01

The counting rate and angular distribution of secondary X-rays produced by fluorescent intensifying screens are studied. A source of 241 Am - gamma radiation of 59.54 keV - is used. Fluorescent intensifying screens reduce the radiation dose in radiology since they produce visible light which increases the efficiency of the film. In addition, secondary X-rays arise due to the photoelectric effect, elastic (Rayleigh) and inelastic (Compton) scattering

A comparison of risks due to HLW and SURF repositories in bedded salt

International Nuclear Information System (INIS)

Chu, M.S.Y.; Ortiz, N.R.; Wahi, K.K.

1983-01-01

A methodology was developed to analyze risks from geologic disposal of nuclear wastes. It was applied to estimate the risk due to spent fuel and high-level waste hypothetical repositories in bedded salt. A number of disruptive scenarios were analyzed for each waste type. A comparison between the spent fuel and high-level waste results is presented. The methodology enables one to identify important radionuclides, parameters, and scenarios in terms of their relative contribution to the overall risk or compliance with the proposed EPA Standard

The contribution of renewable energy in the Netherlands to 2020

International Nuclear Information System (INIS)

Ybema, J.R.; Kroon, P.; De Lange, T.J.; Ruijg, G.J.

1999-09-01

The Dutch Government aims to increase the contribution of renewable energy from a current share of slightly more than 1% of total energy use to 10% by the year 2020. Several policy measures have already been implemented in order to achieve this ambitious target. Currently, the Government wishes an updated insight whether the 10% target is within reach with the existing mix of policy instruments or not. The present analysis of the future contribution of renewables took into account the latest developments with respect to technological innovation, cost reduction, fuel price developments and liberalisation of energy markets. In this study a scenario-based approach is applied to analyse these questions. An existing energy scenario was taken for which the fossil energy price projections have been adjusted downward in accordance with recent insight. All renewable options have been analysed and for several renewable technologies new cost projections have been made based on learning curve analysis. In a scenario with a best estimate for the future cost of renewables and at a constant 15$/bbl (30 Dutch guilder per barrel) oil price, the share of renewables reaches 3.7% of projected total energy use in 2010 and 5.4% in 2020. Relatively large contributions are projected for wind energy, waste and biomass and import of renewable energy. A second request of the Government was to give insight in the approximate additional societal cost to achieve 10% renewable energy. The societal cost of renewables contribution in the 'best guess' is estimated at 1.2 billion Dutch guilders in the year 2020. A mix of policy measures to reach the 10% renewables target in 2020, mainly consisting of more financial incentives, will result in societal cost amounting to 2.5 billion guilders in 2020. Thus, the additional societal cost to meet the 10% target will amount to approximately 1.3 billion guilders in the year 2020. 114 refs

[Anthropology engaged against Ebola (2014-2016): approaches, contributions and new questions].

Science.gov (United States)

Desclaux, Alice; Anoko, Julienne

2017-10-02

Anthropologists contributed to the response to the 2014-2016 Ebola outbreak in three ways : as Ebola experts, cultural mediators between populations and caregivers, and researchers. This article presents a preliminary review of approaches, contributions and related issues based on a literature review, case studies and debates. The anthropological research discussed in this article concerns four themes : epidemiological contexts of transmission ; cultural interpretation of illness and social responses ; social construction of stakeholders' experience ; critical analysis of public health interventions. In addition to insightful contributions, particularly regarding the socio-political contexts and their interfaces with global public health measures, anthropologists tested forms of communication to facilitate access of public health actors to their results. However, these heterogeneous forms of engagement raise a number of questions, especially when they reflect anthropological interpretations that exclude any critical or reflexive dimension, or when anthropology is considered to be similar to social intervention. Nevertheless, anthropological research provides a major contribution, which could be even greater if transnational networks set up by researchers to analyse the socio-political, economic and biocultural dimensions of emerging epidemics are supported in order to improve ?preparedness? for future health crises.

Dietary arsenic exposure in Brazil: The contribution of rice and beans.

Science.gov (United States)

Ciminelli, Virginia S T; Gasparon, Massimo; Ng, Jack C; Silva, Gabriela C; Caldeira, Claudia L

2017-02-01

The human health risk associated with arsenic in food in Southeast Brazil was quantified. Based on the most commonly consumed food types in the Brazilian diet, the maximum inorganic As (iAs) daily intake from food (0.255 μg kg -1 body weight per day) is approximately 9% of the Benchmark Dose Lower Limit (BMDL 0.5 ) of 3 μg kg -1 body weight per day set by the World Health Organization (WHO) and Food and Agriculture Organization (FAO) Joint Expert Committee in Food Additives (JECFA). When water is included, the contribution of food to the total intake varies from 96.9% to 39.7%. Rice and beans, the main Brazilian staple food, contribute between 67 and 90% of the total As intake from food (46-79% from rice and 11-23% from beans). The substantial contribution of beans to total As food intake is reported for the first time. The broad range of As concentrations in rice and beans highlights the variable and potentially large contribution of both to As food intake in places where diet consists largely of these two food categories. Copyright © 2016 Elsevier Ltd. All rights reserved.

Citrus pulp pellets as an additive for orange bagasse silage

Directory of Open Access Journals (Sweden)

R. K. Grizotto

2017-03-01

Full Text Available This study evaluated the fermentation profile of orange bagasse ensiled with three levels of dry matter (DM using citrus pulp pellets as a moisture-absorbing additive. Thirty experimental silos (3 treatments, 5 storage times, 2 replicates were prepared using 25-liter plastic buckets containing orange bagasse and three levels of pelleted citrus pulp (0, 6% and 20% as additive. A completely randomized design with repeated measures over time was used. The periods of anaerobic storage were 3, 7, 14, 28 and 56 days. Natural orange bagasse contained 13.9% DM, which increased to 19.1% and 25.5% with the inclusion of 6% and 20% citrus pulp pellets, respectively. The apparent density was inversely correlated with DM content and a higher level of compaction (982 kg/m3 was observed in the mass ensiled with the lowest DM level (13.9%. Additionally, lower compaction (910 kg/m3 was found in the mass ensiled with the additive. The chemical composition of the mass ensiled with or without citrus pulp pellets did not differ significantly in terms of protein, ether extract, neutral detergent fiber, lignin or in vitro DM digestibility (P≥0.05, as expected. Thus, it was possible to analyze only the effect of the inclusion of citrus pulp pellets on the increase in DM content. The inclusion of 20% of the additive reduced (P<0.01 losses due to effluent (98% less and gas production (81% less compared to the control treatment at the end of the anaerobic storage period. In this treatment, a higher (P≤0.05 log number of lactic acid bacteria (4.61 log CFU/g was also observed compared to the other treatments, indicating that the increase in DM favored the growth of these bacteria. In addition, the low yeast count (about 1 log CFU/g sample and the pH below 4.0, which were probably due to the production of lactic and acetic acids, show that the orange bagasse is rich in fermentable soluble carbohydrates and is indicated for ensiling. In conclusion, orange bagasse can be

Fatal respiratory distress syndrome due to coronavirus infection in a child with severe combined immunodeficiency

OpenAIRE

Szczawinska‐Poplonyk, Aleksandra; Jonczyk‐Potoczna, Katarzyna; Breborowicz, Anna; Bartkowska‐Sniatkowska, Alicja; Figlerowicz, Magdalena

2012-01-01

Please cite this paper as: Szczawinska‐Poplonyk et al. (2012) Fatal respiratory distress syndrome due to coronavirus infection in a child with severe combined immunodeficiency. Influenza and Other Respiratory Viruses DOI: 10.1111/irv.12059. Coronaviruses have been demonstrated to contribute substantially to respiratory tract infections among the child population. Though infected children commonly present mild upper airway symptoms, in high‐risk patients with underlying conditions, particularl...

Investigation on factors that contribute to the abandonment of building in construction industry in Malaysia

Science.gov (United States)

Farhayu Ariffin, Nur; Jaafar, Mohd Faizal Md; Idris Ali, Mohamad; Irwan Ramli, Noram; Muthusamy, Khairunisa; Shukor Lim, Nor Hasanah Abdul

2018-03-01

In Malaysia, the construction sector is one of the important sectors that contribute to economic growth and employments. However, a major concern facing the construction industry is the growing rate of delays in project delivery. In the worse cases, the projects were abandoned due to some reasons when the contract period ended. Abandoned building defines as construction work that has been continuously stalled for 6 months or more, during the project completion period or beyond the scheduled date of completion. When the projects become abandoned, it gives an adverse effect on many parties such as the developer, contractor, consultant and also client. According to previous researchers, the abandonment of building causes a serious problem and need some mitigation plan to avoid this problem from occurring. This study will investigate the fundamental factors that contribute to the abandonment of building and projects in Malaysia based on the current data of the abandoned building in most states in Malaysia. The data was collected from the respondents who is in the construction industry and had experience working with abandoned housing project. Form the respondents perspective, it shows that the main factor contribute to the building abandonment is due to the financial problem facing by the developer company.

TG/FT-IR characterization of additives typically employed in EPDM formulations

Directory of Open Access Journals (Sweden)

Natália Beck Sanches

2015-06-01

Full Text Available AbstractThermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG/FT-IR is a very popular technique for rubbers characterization. It involves analyses of the base polymer and additives. Ethylene–propylene–diene (EPDM rubbers are frequently investigated by TG/FT-IR; however, the focus has been the degradation temperature range of the polymer. In this study, unvulcanized and vulcanized EPDM rubber and its additives were investigated by TG/FT-IR, without solvent extraction, and in a wide temperature range. Initially, the additives were individually characterized. TG/FT-IR identified the characteristic groups of all the additives analyzed and distinguished them from each other. Afterwards, unvulcanized and vulcanized EPDM rubbers were investigated without prior extraction.TG/FT-IR detected absorptions due to the additives tetramethylthiuram monosulfide and 2-mercaptobenzothiazole. Both of these sulfur-containing additives were present in the EPDM formulation at concentrations of 0.7 phr (0.63 wt %. The TG/FT-IR technique had some limitations, because not all the additives in EPDM rubber were detected. Paraffin oil, stearic acid and 2,2,4-trimethyl-1,2-dihydroquinoline functional groups were not observed in either the unvulcanized or vulcanized EPDM. Nevertheless, in addition to the ability of this method to detect sulfur-containing groups, the lack of a pre-extraction reduces the time and effort required for additive analysis in rubbers.

Efficiency of the emission trading. A contribution to the climate protection law

International Nuclear Information System (INIS)

Frenz, Walter

2014-01-01

The contribution discusses the following topics: Inclusion of additional sectors into the emission trading: road traffic and sea traffic, the stepwise realization and difficulties; the failed inclusion of air traffic, rigid penalties in case of violation of the fee delivery, thread for the complete mechanism, over-compliance in Germany and international perspectives.

Contribution à la Gestion des Cercosporioses du bananier dues à ...

African Journals Online (AJOL)

SARAH

31 mai 2017 ... ... Département de Formation et de Recherche Agriculture et ... l'efficacité biologique du Fluopyram (500g/l) associé à un émulsifiant mouillable à ... Le mélange Fluopyram + eau + émulsifiant contrôle partiellement la maladie.

Iatrogenic acute pancreatitis due to hypercalcemia in a child with pseudohypoparathyroidism.

Science.gov (United States)

Feyles, Francesca; Mussa, Alessandro; Peiretti, Valentina; Tessaris, Daniele; Santanera, Arianna; Corrias, Andrea; de Sanctis, Luisa; Calvo, Luigi

2014-01-01

Pancreatitis due to hypercalcemia is very rare in children, and its pathogenetic role is still debated. The following report describes a case of acute pancreatitis secondary to hypercalcemia in a 6-year-old boy with pseudohypoparathyroidism treated with calcium and vitamin D. Pseudohypoparathyroidism is characterized by parathormone (PTH) resistance, high PTH levels and hypocalcemia which need to be corrected with calcium and vitamin D supplementation. The patient was admitted for severe abdominal pain and vomiting associated with high plasma amylase, lipase and calcium levels. Hypercalcemia due to vitamin D and calcium overtreatment was probably responsible for the acute pancreatitis in this case. High serum calcium levels seem to sensitize patients to pancreatitis, even if the mechanism through which it happens is not completely understood. Moreover, the importance of concomitant predisposing factors, either acquired or especially genetic, needs to be further defined. Even though a rare occurance in childhood, hypercalcemia should be considered as a cause of pancreatitis and it should be examined together with the other etiologies that may contribute to the development of this disease.

Denaturalizing the technique: feminists contributions to think the cinematography

Directory of Open Access Journals (Sweden)

Marina Cavalcanti Tedesco

2014-07-01

Full Text Available Cinematography is generally understood as a technological area, which means neutral for many people. This may account for not deserving the due attention into the cinema and the audiovisual studies. However, as any technique, it was developed starting from some hypotheses to reach specific objectives. In this study, we aim to analyze it with a feministic perspective to identify the gender views that contributed to its expression, which were influenced by it. We ́ll do that by the sudy of some cinematographic manuals edited since the years 1930, comparing their guidelines with some important classic/industrial Mexican films.

Isobar contributions to the imaginary part of the optical-model potential for finite nuclei

International Nuclear Information System (INIS)

Hjort-Jensen, M.; Borromeo, M.; Muether, H.; Polls, A.

1992-03-01

A recently developed non-relativistic method for calculating the nucleon optical-model potential has been employed to evaluate the contributions from isobaric degrees of freedom to the imaginary part of the nucleon optical-model potential. To evaluate the imaginary part of the optical-model potential, the authors include the contributions from terms to second order in the Brueckner G-matrix with and without the inclusion of isobars Δ. Results for 16 O are presented in this work. The contributions to the imaginary part are given by the two-particle-one-hole (2p1h) and three-particle-two-hole (3p2h) diagrams. The latter contributes at negative energies only and the contribution from isobar intermediate states is rather small. The 2p1h receives significant contributions from isobars at energies near the resonance and above the threshold for the excitation of ΔΔ states. In particular, the importance of ΔΔ configurations is rather sensitive to the treatment of short-range correlations. The parameterization of the self-energy in terms of local potentials is discussed. The depletion of the occupation of the single-particle orbits due to nucleon-nucleon correlations and Δ excitations is evaluated. 49 refs., 14 figs., 3 tabs

Nurse IOM members' contributions to the Institute of Medicine.

Science.gov (United States)

Grey, Margaret; Holzemer, William L; Larson, Elaine

2012-01-01

Nursing is the largest health care profession, and Institute of Medicine (IOM) nurse members have the potential to contribute to health policy through IOM activities. We studied reported activities of IOM nurse members. To describe activities of IOM nurse members within the IOM. An e-mail survey was conducted that asked nurse IOM members to assess self-reported IOM activities. Of 57 members, 47 had functioning e-mail addresses, and 33 usable responses were received. The survey consisted of 9 questions dealing with roles and responsibilities undertaken in the previous 5 years. Data analyses were descriptive. The data suggest that nurses have made considerable contributions to the IOM and their participation seems to be as high, or higher, than other disciplines. In an era of health care reform, there is additional opportunity for nurse IOM members to enhance their work in the IOM. Copyright © 2012 Elsevier Inc. All rights reserved.

On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing

International Nuclear Information System (INIS)

Haberland, Christoph; Elahinia, Mohammad; Walker, Jason M; Meier, Horst; Frenzel, Jan

2014-01-01

Additive manufacturing provides an attractive processing method for nickel–titanium (NiTi) shape memory and pseudoelastic parts. In this paper, we show how the additive manufacturing process affects structural and functional properties of additively manufactured NiTi and how the process parameter set-up can be optimized to produce high quality NiTi parts and components. Comparisons of shape recovery due to shape memory and pseudoelasticity in additively manufactured and commercial NiTi exhibit promising potential for this innovative processing method. (paper)

Chondroitin sulfate addition to CD44H negatively regulates hyaluronan binding

International Nuclear Information System (INIS)

Ruffell, Brian; Johnson, Pauline

2005-01-01

CD44 is a widely expressed cell adhesion molecule that binds hyaluronan, an extracellular matrix glycosaminoglycan, in a tightly regulated manner. This regulated interaction has been implicated in inflammation and tumor metastasis. CD44 exists in the standard form, CD44H, or as higher molecular mass isoforms due to alternative splicing. Here, we identify serine 180 in human CD44H as the site of chondroitin sulfate addition and show that lack of chondroitin sulfate addition at this site enhances hyaluronan binding by CD44. A CD44H-immunoglobulin fusion protein expressed in HEK293 cells, and CD44H expressed in murine L fibroblast cells were modified by chondroitin sulfate, as determined by reduced sulfate incorporation after chondroitinase ABC treatment. Mutation of serine 180 or glycine 181 in CD44H reduced chondroitin sulfate addition and increased hyaluronan binding, indicating that serine 180 is the site for chondroitin sulfate addition in CD44H and that this negatively regulates hyaluronan binding

Revisiting the contribution of land transport and shipping emissions to tropospheric ozone

Science.gov (United States)

Mertens, Mariano; Grewe, Volker; Rieger, Vanessa S.; Jöckel, Patrick

2018-04-01

We quantify the contribution of land transport and shipping emissions to tropospheric ozone for the first time with a chemistry-climate model including an advanced tagging method (also known as source apportionment), which considers not only the emissions of nitrogen oxides (NOx, NO, and NO2), carbon monoxide (CO), and volatile organic compounds (VOC) separately, but also their non-linear interaction in producing ozone. For summer conditions a contribution of land transport emissions to ground-level ozone of up to 18 % in North America and Southern Europe is estimated, which corresponds to 12 and 10 nmol mol-1, respectively. The simulation results indicate a contribution of shipping emissions to ground-level ozone during summer on the order of up to 30 % in the North Pacific Ocean (up to 12 nmol mol-1) and 20 % in the North Atlantic Ocean (12 nmol mol-1). With respect to the contribution to the tropospheric ozone burden, we quantified values of 8 and 6 % for land transport and shipping emissions, respectively. Overall, the emissions from land transport contribute around 20 % to the net ozone production near the source regions, while shipping emissions contribute up to 52 % to the net ozone production in the North Pacific Ocean. To put these estimates in the context of literature values, we review previous studies. Most of them used the perturbation approach, in which the results for two simulations, one with all emissions and one with changed emissions for the source of interest, are compared. For a better comparability with these studies, we also performed additional perturbation simulations, which allow for a consistent comparison of results using the perturbation and the tagging approach. The comparison shows that the results strongly depend on the chosen methodology (tagging or perturbation approach) and on the strength of the perturbation. A more in-depth analysis for the land transport emissions reveals that the two approaches give different results

Contribute to Wikipedia: An approach to Increase Research Visibility on the Web

OpenAIRE

Ebrahim, Nader Ale

2016-01-01

Wikipedia is a tool for collaboration, information sharing and knowledge/content management which anyone can edit. Wikipedia is widely used by students during the research process. So, due to Wikipedia popularity, contributing to Wikipedia website is one way of increasing citation score. In this workshop, I try to answer “Does including your papers as citations on Wikipedia increase the number of academic citations you get?” if yes, how?.

Increasing of visibility on the pedestrian crossing by the additional lighting systems

Science.gov (United States)

Baleja, Richard; Bos, Petr; Novak, Tomas; Sokansky, Karel; Hanusek, Tomas

2017-09-01

Pedestrian crossings are critical places for road accidents between pedestrians and motor vehicles. For this reason, it is very important to increase attention when the pedestrian crossings are designed and it is necessary to take into account all factors that may contribute to higher safety. Additional lighting systems for pedestrian crossings are one of them and the lighting systems must fulfil the requirements for higher visibility from the point of view of car drivers from both directions. This paper describes the criteria for the suitable additional lighting system on pedestrian crossings. Generally, it means vertical illuminance on the pedestrian crossing from the driver’s view, horizontal illuminance on the crossing and horizontal illuminance both in front of and behind the crossing placed on the road and their acceptable ratios. The article also describes the choice of the colours of the light (correlated colour temperature) and its influence on visibility. As a part of the article, there are case designs of additional lighting systems for pedestrian crossings and measurements from realized additional lighting systems by luxmeters and luminance cameras and their evaluation.

Attributing uncertainty in streamflow simulations due to variable inputs via the Quantile Flow Deviation metric

Science.gov (United States)

Shoaib, Syed Abu; Marshall, Lucy; Sharma, Ashish

2018-06-01

Every model to characterise a real world process is affected by uncertainty. Selecting a suitable model is a vital aspect of engineering planning and design. Observation or input errors make the prediction of modelled responses more uncertain. By way of a recently developed attribution metric, this study is aimed at developing a method for analysing variability in model inputs together with model structure variability to quantify their relative contributions in typical hydrological modelling applications. The Quantile Flow Deviation (QFD) metric is used to assess these alternate sources of uncertainty. The Australian Water Availability Project (AWAP) precipitation data for four different Australian catchments is used to analyse the impact of spatial rainfall variability on simulated streamflow variability via the QFD. The QFD metric attributes the variability in flow ensembles to uncertainty associated with the selection of a model structure and input time series. For the case study catchments, the relative contribution of input uncertainty due to rainfall is higher than that due to potential evapotranspiration, and overall input uncertainty is significant compared to model structure and parameter uncertainty. Overall, this study investigates the propagation of input uncertainty in a daily streamflow modelling scenario and demonstrates how input errors manifest across different streamflow magnitudes.

Electrode impedance analysis of chronic tungsten microwire neural implants: understanding abiotic vs. biotic contributions

Directory of Open Access Journals (Sweden)

Viswanath eSankar

2014-05-01

Full Text Available Changes in biotic and abiotic factors can be reflected in the complex impedance spectrum of the microelectrodes chronically implanted into the neural tissue. The recording surface of the tungsten electrode in vivo undergoes abiotic changes due to recording site corrosion and insulation delamination as well as biotic changes due to tissue encapsulation as a result of the foreign body immune response. We reported earlier that large changes in electrode impedance measured at 1 kHz were correlated with poor electrode functional performance, quantified through electrophysiological recordings during the chronic lifetime of the electrode. There is a need to identity the factors that contribute to the chronic impedance variation. In this work, we use numerical simulation and regression to equivalent circuit models to evaluate both the abiotic and biotic contributions to the impedance response over chronic implant duration. COMSOL® simulation of abiotic electrode morphology changes provide a possible explanation for the decrease in the electrode impedance at long implant duration while biotic changes play an important role in the large increase in impedance observed initially.

Effect of the prefermentative addition of five enological tannins on anthocyanins and color in red wines.

Science.gov (United States)

Liu, Yan-Xia; Liang, Na-Na; Wang, Jun; Pan, Qiu-Hong; Duan, Chang-Qing

2013-01-01

The effects of prefermentation addition of 5 exogenous tannins with different-origin anthocyanins and color characteristics were investigated in "Cabernet Sauvignon wines" at the end of alcoholic fermentation and the end of malolactic fermentation, and after 6 mo and 9 mo of bottle aging, respectively. The results showed that the application of GSKT2 could significantly retard the degradation of most anthocyanins in the process of alcoholic fermentation and the decrease of some pyranoanthocyanins during the subsequent 3 stages, thus causing more yellowness of wine in comparison with the control. Three other condensed tannins, GSKT1, QUET, and GSET, had a positive impact only on several anthocyanin components. Four condensed tannins all contributed to more redness, suggesting that the action mechanism might be to protect wine against oxidation or contribute to form copigmented anthocyanidins, or polymeric pigments. The application of FOLT (hydrolysable tannin) did not produce any influence on wine redness even after 9 mo of bottle aging. This work provides some reasons for the reasonable application of tannin additives. The prefermentative application of condensed tannins overall could protect some pigment components from degradation and enhance wine redness. Tannin additives with different origins have different effectiveness. The tannin additive obtained from grape skins, like GSKT2, could produce significant promotion on both redness and yellowness in wine. The prefermentation addition of hydroxylase tannin like FOLT seems not to have a significant effect on wine color. © 2012 Institute of Food Technologists®

Investigation on the Accuracy of CT Porosity Analysis of Additive Manufactured Metallic Parts

NARCIS (Netherlands)

Zanini, Filippo; Hermanek, Petr; Rathore, Jitendra; Wits, Wessel W; Carmignato, Simone

2015-01-01

Additive manufacturing (AM) is emerging as an important manufacturing sector, due to its almost unlimited design freedom, the capability to produce personalized parts and the efficient material use. A reliable knowledge about material porosity of manufactured parts is crucial for optimizing AM

Rents in the European power sector due to carbon trading

International Nuclear Information System (INIS)

Keppler, Jan Horst; Cruciani, Michel

2010-01-01

The European Union Emissions Trading Scheme (EU ETS) has imposed a price on the allowances for CO 2 emissions of electricity companies. Integrating this allowance price into the price of electricity earns a rent for companies who have received these allowances for free. During Phase I, 2005-2007, rents corresponding to the aggregate value of allocated allowances amounted to roughly EUR 13 billion per year. However, due to the specific price-setting mechanism in electricity markets true rents were considerably higher. This is due to the fact that companies also that have not received any allowances gain additional infra-marginal rents to the extent that their variable costs are below the new market price after inclusion of the allowance price. Producers with low carbon emissions and low marginal costs thus also benefit substantially from carbon pricing. This paper develops a methodology to determine the specific interaction of the imposition of such a CO 2 constraint and the price-setting mechanism in the electricity sector under the assumption of marginal cost pricing in a liberalized European electricity market. The article thus provides an empirical estimate of the true total rents of power producers during Phase I of the EU-ETS (2005-2007). The EU ETS generated in Phase I additional rents in excess of EUR 19 billion per year for electricity producers. These transfers are distributed very unevenly between different electricity producers. In a second step, the paper assesses the impact of switching from free allocation to an auctioning of allowances in 2013. We show that such a switch to auctioning will continue to create additional infra-marginal rents for certain producers and will leave the electricity sector as a whole better off than before the introduction of the EU ETS. (author)