WorldWideScience

Sample records for adaptive reuse projects

  1. The Adaptive Reuse of Kirkuk Citadel

    Directory of Open Access Journals (Sweden)

    Mustafa Sabah Saleh Mokhtar

    2017-12-01

    Full Text Available Knowledge and memory influence the interpretations of a built environment, implying particular expectations in regard to the built environments and their roles in a society. People and their culture constitute the spirits of a building and a space. Memory also can dominate many heritage users, individuals, social and political groups over many centuries. Memory and spirit of cultural heritage enriches cultural identity under the global development. The adaptive reuse of heritage buildings is valued for the contribution for social and environmental sustainability as well as retaining memory. The inherent value of cultural heritage components and their place within the community’s memory helps to reinforce sense of place. In conservation sense identity, memory and the relationships of people give cultural significance to historical places. Evolution of the built environments bridges past and present to the future and embrace memory. However the cities as organisms are in a dilemma along with the loss of city memories and city spirits. These collective memories that bring spirits to a place play very important role and determine the cultural significance of places. The main contribution of this study is to emphasize the importance of adaptive reuse as a carrier of spirits to have a collective memory in order to sustain the development of a place. This article explores the relations between spirit and memory of a place by focusing of adaptive reuse project in Kirkuk citadel.   Aim of this study is to question and evaluate restoration of Kirkuk Citadel in terms of urban identity and sense of place referring the early Kirkuk city and development of it. This paper also intends to put important guidelines for the future restoration projects of Kirkuk citadel – which is very urgently required – and high lights the importance of revitalizing this area, which is now the semi-dead heart of the city. The paper advocates policy makers is to increase

  2. The Adaptive Reuse of Kirkuk Citadel

    OpenAIRE

    Mokhtar, Mustafa Sabah Saleh; Korumaz, Mustafa

    2017-01-01

    Knowledge and memory influence the interpretations of a built environment, implying particular expectations in regard to the built environments and their roles in a society. People and their culture constitute the spirits of a building and a space. Memory also can dominate many heritage users, individuals, social and political groups over many centuries. Memory and spirit of cultural heritage enriches cultural identity under the global development. The adaptive reuse of heritage buildings is ...

  3. Selecting a Sustainable Disinfection Technique for Wastewater Reuse Projects

    Directory of Open Access Journals (Sweden)

    Jorge Curiel-Esparza

    2014-09-01

    Full Text Available This paper presents an application of the Analytical Hierarchy Process (AHP by integrating a Delphi process for selecting the best sustainable disinfection technique for wastewater reuse projects. The proposed methodology provides project managers a tool to evaluate problems with multiple criteria and multiple alternatives which involve non-commeasurable decision criteria, with expert opinions playing a major role in the selection of these treatment technologies. Five disinfection techniques for wastewater reuse have been evaluated for each of the nine criteria weighted according to the opinions of consulted experts. Finally, the VIKOR method has been applied to determine a compromise solution, and to establish the stability of the results. Therefore, the expert system proposed to select the optimal disinfection alternative is a hybrid method combining the AHP with the Delphi method and the VIKOR technique, which is shown to be appropriate in realistic scenarios where multiple stakeholders are involved in the selection of a sustainable disinfection technique for wastewater reuse projects.

  4. Reusing open data for learning database design through project development

    Directory of Open Access Journals (Sweden)

    Jose-Norberto MAZÓN

    2015-12-01

    Full Text Available This paper describes a novel methodology based on reusing open data for applying project-based learning in a Database Design subject of a university degree. This methodology is applied to the ARA (Alto Rendimiento Académico or High Academic Performance group taught in the degree in Computer Engineering at the University of Alicante (Spain during 2012/2013, 2013/2014, and 2014/2015. Openness philosophy implies that huge amount of data is available to students in tabular format, ready for reusing. In our teaching experience, students propose an original scenario where different open data can be reused to a specific goal. Then, it is proposed to design a database in order to manage this data in the envisioned scenario. Open data in the subject helps in instilling a creative and entrepreneur attitude in students, as well as encourages autonomous and lifelong learning. Surveys made to students at the end of each year shown that reusing open data within project-based learning methodologies makes more motivated students since they are using real data.

  5. Advancing indigent healthcare services through adaptive reuse: repurposing abandoned buildings as medical clinics for disadvantaged populations.

    Science.gov (United States)

    Elrod, James K; Fortenberry, John L

    2017-12-13

    Challenges abound for healthcare providers engaged in initiatives directed toward disadvantaged populations, with financial constraints representing one of the most prominent hardships. Society's less fortunate typically lack the means to pay for healthcare services and even when they are covered by government health insurance programs, reimbursement shortcomings often occur, placing funding burdens on the shoulders of establishments dedicated to serving those of limited means. For such charitably-minded organizations, efficiencies are required on all fronts, including one which involves significant operational costs: the physical space required for care provision. Newly constructed buildings, whether owned or leased, are expensive, consuming a significant percentage of funds that otherwise could be directed toward patient care. Such costs can even prohibit the delivery of services to indigent populations altogether. But through adaptive reuse-the practice of repurposing existing, abandoned buildings, placing them back into service in pursuit of new missions-opportunities exist to economize on this front, allowing healthcare providers to acquire operational space at a discount. In an effort to shore up related knowledge, this article profiles Willis-Knighton Health System's development of Project NeighborHealth, an indigent clinic network which was significantly bolstered by the economies associated with adaptive reuse. Despite its potential to bolster healthcare initiatives directed toward the medically underserved by presenting more affordable options for acquiring operational space, adaptive reuse remains relatively obscure, diminishing opportunities for providers to take advantage of its many benefits. By shedding light on this repurposing approach, healthcare providers will have a better understanding of adaptive reuse, enabling them to make use of the practice to improve the depth and breadth of healthcare services available to disadvantaged populations.

  6. EVALUATION OF AUTHENTICITY ON THE BASIS OF THE NARA GRID IN ADAPTIVE REUSE OF MANOCHEHRI HISTORICAL HOUSE KASHAN, IRAN

    Directory of Open Access Journals (Sweden)

    Parastoo Eshrati

    2017-11-01

    Full Text Available Since it is highly desirable in the reuse of historic monuments not only to maintain their values but to promote them in contemporary life, authenticity is considered one of the measures of success in adaptive reuse projects. Nara Grid, which is designed concerning authenticity, is used as a tool to assess the authenticity of cultural heritage. This paper investigates authenticity in the adaptive reuse of Manouchehri House in Kashan based on the Nara Grid. The importance of this house lies in the fact that it is one of the first which has been reused by the private sector in this city and also has managed to encourage private sector partnership in the reuse of houses in this city and other historic cities of Iran. It has also been able to increase government trust, which shifts from top-down to a bottom-up approach in the field of cultural heritage, in the private sector. In this research, using Statistical Analysis methods, it is determined within the adaptive reuse of this house which ‘Dimensions’ and ‘Aspects’ of authenticity have received more attention and which ones received less; and also significant differences among individual’s viewpoints according to their gender, field, education, and age were investigated.

  7. Adaptive Re-Use Principles in Historic Hotel Buildings in Melaka And George Town

    Directory of Open Access Journals (Sweden)

    Ab Wahab Lilawati

    2016-01-01

    Full Text Available Adaptive re-use of historic buildings is a process of changing the original function of the historic buildings to another function that can optimise the use of existing historic buildings. The selection of appropriate new function is an important factor in determining the success of adaptive re-use of historic buildings. However, adaptive re-use work done on historic buildings on the World Heritage Site is not an easy task due to rules and principles outlined by local and international charters that must be abide by. This research is conducted to gather the true picture of applied adaptive re-use principles that has been done on heritage hotels available in Melaka and George Town World Heritage Sites. This research is started with an inventory that led to the discovery of 35 hotels which applied the principle of adaptive re-use of historic buildings. Based on this finding, 4 historic hotels from adaptive re-use applications have been selected as the case studies. Results of the case studies carried out show that the level of conservation of heritage hotel is moderate and measures of control should be taken to ensure the privileges of heritage hotel. As a result of this research, a number of suggestions are made to ensure that adaptive re-use work done in the future will be conducted as optimum as possible according to the adaptive re-use and conservation principles.

  8. Sustainable Building Assessment of Colonial Shophouses after Adaptive Reuse in Kuala Lumpur

    Directory of Open Access Journals (Sweden)

    Karam M. Al-Obaidi

    2017-10-01

    Full Text Available Kuala Lumpur, as a major capital city, has undergone a drastic transformation in the past ten years. Many heritage buildings have been sacrificed for urban renewal projects. Those located in the touristic heritage zones within Kuala Lumpur were being converted by their owners into hotels and cafés to meet current demands to sustain their incomes. This approach, however, creates several physical and environmental issues within the new adaptation. The aim of this study is to evaluate the building performance of heritage shophouses that were adapted into budget hotels. The research focuses on two case studies in a strategic and historical location of Jalan Sultan, Kuala Lumpur. At the initial stage, interviews and physical surveys were done to determine the context of this study. The authors of this research then used a triangulation method through indoor environmental condition assessment, measurements of indoor environmental conditions and occupant survey to determine the indoor building performance after the adaption. Results showed that adaptive reuse heritage buildings can perform and meet new indoor environmental requirements, but many sensitive design judgments need to be made before the adaptive reuse renovation. The research found that the use of natural light, natural ventilation, recycled materials and water efficiency have been neglected and thus, they should be prioritized and preserved to ensure a successful change of use. Conserving existing heritage buildings, while incorporating new usages with acceptable comfort, is in line with the principle of sustainability.

  9. Life Cycle Energy Analysis of Reclaimed Water Reuse Projects in Beijing.

    Science.gov (United States)

    Fan, Yupeng; Guo, Erhui; Zhai, Yuanzheng; Chang, Andrew C; Qiao, Qi; Kang, Peng

    2018-01-01

      To illustrate the benefits of water reuse project, the process-based life cycle analysis (LCA) could be combined with input-output LCA to evaluate the water reuse project. Energy is the only evaluation parameter used in this study. Life cycle assessment of all energy inputs (LCEA) is completed mainly by the life cycle inventory (LCI), taking into account the full life cycle including the construction, the operation, and the demolition phase of the project. Assessment of benefit from water reuse during the life cycle should focus on wastewater discharge reduction and water-saving benefits. The results of LCEA of Beijing water reuse project built in 2014 in a comprehensive way shows that the benefits obtained from the reclaimed water reuse far exceed the life cycle energy consumption. In this paper, the authors apply the LCEA model to estimate the benefits of reclaimed water reuse projects quantitatively.

  10. Adaptive projective filters

    International Nuclear Information System (INIS)

    Dikusar, N.D.

    1993-01-01

    The new approach to solving of the finding problem is proposed. The method is based on Discrete Projective Transformations (DPT), the List Square Fitting (LSF) and uses the information feedback in tracing for linear or quadratic track segments (TS). The fast and stable with respect to measurement errors and background points recurrent algorithm is suggested. The algorithm realizes the family of digital adaptive projective filters (APF) with known nonlinear weight functions-projective invariants. APF can be used in adequate control systems for collection, processing and compression of data, including tracking problems for the wide class of detectors. 10 refs.; 9 figs

  11. Funding Water Reuse and Conservation Projects with the Clean Water State Revolving Fund

    Science.gov (United States)

    This fact sheet demonstrates how the CWSRF provides assistance to eligible recipients for projects promoting water reuse and conservation. It highlights successful projects for these communities in California, Virginia and Texas.

  12. A Case Study of Horizontal Reuse in a Project-Driven Organisation

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Røn, Henrik

    2000-01-01

    This experience paper presents observations, lessons learned, and recommendations based on a case study of reuse. The case study is concerned with the development, maturation, and reuse of a business domain independent software component (horizontal reuse) in a project-driven organisation that has...... knowledge is transferred within an organisation; (c) design patterns can be as risky as they can be beneficial; and (d) there is more to architectural mismatch than “merely ” packaging mismatch....

  13. The Suitability of Adaptive Reuse Practices on Historic Residential Buildings to National Memorials

    Directory of Open Access Journals (Sweden)

    Nor Syahila Ab Rashid

    2014-06-01

    Full Text Available In order to prolong the life of the old buildings in the country through building conservation practices, there is a tendency by the government to acquire and reuse Malaysian leadership figures’ residential buildings as memorials. However, it raises the question of whether there is any adaptive reuse guidelines to reuse historic residential buildings in Malaysia as national memorials in maintaining those buildings as an exhibition space on the history of their leadership. The absence of guidelines raises questions about how to implement the process accordingly. The objective of this research is to find the best formula for reusing historic residential buildings as national memorials based on that issue by reviewing and identify the principles of adaptive reuse practices of historic residential buildings as national memorials that implemented in Malaysia. The case studies were conducted on three samples of historic residential buildings that reused as national memorials and those buildings were selected based on a list of the study population, which are Rumah Kelahiran Tun Dr. Mahathir Mohamad (The Birthplace of Tun Dr. Mahathir Mohamad, Rumah Merdeka (Freedom House and Memorial Tun Abdul Ghafar Baba (The Tun Abdul Ghafar Baba Memorial. The sample may be determined by the sampling method and evaluated using the checklist provided. Based on the results of the case studies that were analyzed and discussed, it can be concluded that aspects of building code (local requirements as well as environmental and conservation requirements are not met in implementing adaptive reuse process on historic residential buildings to national memorials which needs suggestions for improvement.

  14. Adaptive Reuse as A Strategy Toward Urban Resilience

    OpenAIRE

    Deniz Ozge Aytac; Tulin Vural Arslan; Selen Durak

    2016-01-01

    The significance of urban development has been realized again while acute shocks and chronic stresses (earthquake or unemployment) affect cities in a negative way. Therefore, urban resilience becomes more important for economic, environmental, and social sustainability of the built environment. There is a wide range of approaches to resilience in the literature such as ecological, engineering, and adaptive systems. Unlike others, adaptive resilience establishes a co-evolutionary interaction b...

  15. Learning Experiences Reuse Based on an Ontology Modeling to Improve Adaptation in E-Learning Systems

    Science.gov (United States)

    Hadj M'tir, Riadh; Rumpler, Béatrice; Jeribi, Lobna; Ben Ghezala, Henda

    2014-01-01

    Current trends in e-Learning focus mainly on personalizing and adapting the learning environment and learning process. Although their increasingly number, theses researches often ignore the concepts of capitalization and reuse of learner experiences which can be exploited later by other learners. Thus, the major challenge of distance learning is…

  16. Water Reuse Project in Virginia Providing Multiple Benefits

    Science.gov (United States)

    More than 500 million gallons a year of treated wastewater that would otherwise be discharged into a tributary of the Chesapeake Bay are instead being put to beneficial reuse to cool a waste-to-energy plant and irrigate a golf course and ball fields.

  17. Creative ideation and adaptive reuse: a solution to sustainable urban heritage conservation

    Science.gov (United States)

    Hasnain, H.; Mohseni, F.

    2018-03-01

    The rapid phenomenon of urbanization in the last century has resulted in abandonment of historic urban centers and still today attracting people to suburbs and newly developed districts. This urban expansion poses a serious threat to historic properties when people opt to move away leaving behind their heritage. The adaptive reuse of heritage is considered to be a dominant strategy for handling this issue bypassing demolition of heritage properties. However, the adaptive reuse cannot only consider the preservation of the heritage as the structural retrofit or functional revitalization but rather it needs to enunciate the image and the creative ideation that reflect upon the future of heritage. Consequently, this paper aims to examine the role of branding as an innovative source of ideation in the implication of adaptive reuse on heritage. In this regards, the case study of Zalando outlet store in Berlin is selected, which is an old building situated in the commercial district of the city in a wide range of styles and heritage buildings from the middle ages. This research uses semi-structured interviews to examine the significance of Brand making in a successful adaptive reuse process. The findings indicate that the importance of the outlet building lies not only in its physical fabric or commercial aspects, but the spirit of the place that lies in the magical essence of big labels as emblems. This underlying essence of place stimulated the adaptation of building in a way that it surpasses the physical and functional aspect of a building and makes it merge in new times and new sustainable development.

  18. Risk management, financial evaluation and funding for wastewater and stormwater reuse projects.

    Science.gov (United States)

    Furlong, Casey; De Silva, Saman; Gan, Kein; Guthrie, Lachlan; Considine, Robert

    2017-04-15

    This paper has considered risk management, financial evaluation and funding in seven Australian wastewater and stormwater reuse projects. From the investigated case studies it can be seen that responsible parties have generally been well equipped to identify potential risks. In relation to financial evaluation methods some serious discrepancies, such as time periods for analysis, and how stormwater benefits are valued, have been identified. Most of the projects have required external, often National Government, funding to proceed. As National funding is likely to become less common in the future, future reuse projects may need to be funded internally by the water industry. In order to enable this the authors propose that the industry requires (1) a standard project evaluation process, and (2) an infrastructure funders' forum (or committee) with representation from both utilities and regulators, in order to compare and prioritise future reuse projects against each other. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. The adaptive reuse of historic city centres. Bologna and Lisbon: solutions for urban regeneration

    Directory of Open Access Journals (Sweden)

    Andrea Boeri

    2016-11-01

    Full Text Available The European historic city centres are currently experiencing innovative approaches for rehabilitation of urban spaces afflicted by social and physical decay. The revitalization challenges are a consequence of the integration of contemporary technologies and solutions to achieve new requirements and of the impacts of socio-economic dynamics. Understanding and boosting the drivers connected to the cultural potential of the historic city centres can play an important role in adaptive re-use. This paper focuses on the synergy between cultural heritage and urban development, cultural heritage preservation and local economic growth, proposing adaptive reuse design practices applied in historic city centre, through the adoption of a multi-criteria methodology for heritage-led regeneration.

  20. Investigation on Adaptive Re-use of Heritage Building in George Town, Penang

    Directory of Open Access Journals (Sweden)

    Marhamah Abdul Hadi

    2013-09-01

    Full Text Available Adaptive re-use of heritage buildings in George Town has gained attention from their owners. Their owners either private owners or government, want to adapt their respective buildings to new usage for instance to become a gallery, museum, restaurant, boutique hotel and many more. Every heritage building that is being adapted to paper main objective is to identify the changes made in terms of structure, space and material when adapting the heritage buildings to a new usage specifically into a gallery. Two heritage buildings are chosen as case studies for this paper which are Rumah Teh Bunga and Fort Cornwallis; both buildings located in Penang, Malaysia. The changes made to these two buildings were analyzed using the guidelines provided which are Guideline for Conservation areas and Heritage Buildings and National Heritage Acts 2005. Both buildings will be analyzed using National Heritage Acts, while only Fort Cornwallis will be analyzed using Guideline for Conservation areas and Heritage Buildings. Adaptation of these two heritage buildings requires changes in structure, space and material. The changes in Rumah Teh Bunga focuses more on materials and space while changes in Fort Cornwallis emphasize more to space and addition of other structures. Analysis on the changes are made by using the guideline provided, most of the changes made to both of these heritage buildings comply the rules and regulations stated in the guideline. It was found from the data that some of the reasons on why the owner change Rumah Teh Bunga to gallery are because of its complicated procedure that involves in privatization of this building to other owner and the need to promote the heritage significance of this building to the public. As for Fort Cornwallis, the adaptation is more on strengthening its value as a fort and becoming a tourist attraction.

  1. ADAPTIVE REUSE FOR NEW SOCIAL AND MUNICIPAL FUNCTIONS AS AN ACCEPTABLE APPROACH FOR CONSERVATION OF INDUSTRIAL HERITAGE ARCHITECTURE IN THE CZECH REPUBLIC

    Directory of Open Access Journals (Sweden)

    Oleg Fetisov

    2016-04-01

    Full Text Available The present paper deals with a problem of conservation and adaptive reuse of industrial heritage architecture. The relevance and topicality of the problem of adaptive reuse of industrial heritage architecture for new social and municipal functions as the conservation concept are defined. New insights on the typology of industrial architecture are reviewed (e. g. global changes in all European industry, new concepts and technologies in manufacturing, new features of industrial architecture and their construction and typology, first results of industrialization and changes in the typology of industrial architecture in post-industrial period. General goals and tasks of conservation in context of adaptive reuse of industrial heritage architecture are defined (e. g. historical, architectural and artistic, technical. Adaptive reuse as an acceptable approach for conservation and new use is proposed and reviewed. Moreover, the logical model of adaptive reuse of industrial heritage architecture as an acceptable approach for new use has been developed. Consequently, three general methods for the conservation of industrial heritage architecture by the adaptive reuse approach are developed: historical, architectural and artistic, technical. Relevant functional methods' concepts (social concepts are defined and classified. General beneficial effect of the adaptive reuse approach is given. On the basis of analysis results of experience in adaptive reuse of industrial architecture with new social functions general conclusions are developed.

  2. Reuse of drainage water in the Nile Delta; monitoring, modelling and analysis; final report Reuse of Drainage Water Project

    NARCIS (Netherlands)

    Staring Centrum, Instituut voor Onderzoek van het LandelijkGebied

    1995-01-01

    The effects of reusing drainage water have been evaluated and other options to increase the water utilization rate in Egypt explored. The results are an operational network for monitoring drainage water discharges and salinity along the major drains, a database for monitored drainage water

  3. The reliability evaluation of reclaimed water reused in power plant project

    Science.gov (United States)

    Yang, Jie; Jia, Ru-sheng; Gao, Yu-lan; Wang, Wan-fen; Cao, Peng-qiang

    2017-12-01

    The reuse of reclaimed water has become one of the important measures to solve the shortage of water resources in many cities, But there is no unified way to evaluate the engineering. Concerning this issue, it took Wanneng power plant project in Huai city as a example, analyzed the reliability of wastewater reuse from the aspects of quality in reclaimed water, water quality of sewage plant, the present sewage quantity in the city and forecast of reclaimed water yield, in particular, it was necessary to make a correction to the actual operation flow rate of the sewage plant. the results showed that on the context of the fluctuation of inlet water quality, the outlet water quality of sewage treatment plants is basically stable, and it can meet the requirement of circulating cooling water, but suspended solids(SS) and total hardness in boiler water exceed the limit, and some advanced treatment should be carried out. In addition, the total sewage discharge will reach 13.91×104m3/d and 14.21×104m3/d respectively in the two planning level years of the project. They are greater than the normal collection capacity of the sewage system which is 12.0×104 m3/d, and the reclaimed water yield can reach 10.74×104m3/d, which is greater than the actual needed quantity 8.25×104m3/d of the power plant, so the wastewater reuse of this sewage plant are feasible and reliable to the power plant in view of engineering.

  4. Management and Beneficial Reuse of Overburden Material - Linde Formerly Utilized Sites Remedial Action Program (FUSRAP) Remediation Project

    International Nuclear Information System (INIS)

    Boyle, J.D.; Schwippert, M.; Lorenz, W.D.

    2009-01-01

    This paper outlines three separate and distinct situations where the proper management of overburden material allows for the beneficial reuse of overburden material. Beneficial reuse of overburden material at the Linde Project was made possible by a simultaneous combination of physical conditions at the site in conjunction with collaborative planning and cooperation between U.S. Army Corps of Engineers - Buffalo District, New York State Department of Energy and Conservation, the Owner and Shaw Environmental and Infrastructure. Efforts by the project team focused on maintaining compliance with project plan requirements, communicating the plan to all parties, executing the plan safely and efficiently, and emphasizing fiscal responsibility to ensure maximum cost savings. (authors)

  5. Developing improved opportunities for the recycling and reuse of materials in road, bridge, and construction projects.

    Science.gov (United States)

    2014-12-01

    The use of recycled and reused materials in transportation construction reduces consumption of non-renewable : resources. The objective of this research was to develop opportunities for improving the recycling and reuse of : materials in road and bri...

  6. Brownfields Recover Your Resources - Reduce, Reuse, and Recycle Construction and Demolition Materials at Land Revitalization Projects

    Science.gov (United States)

    This document provides background information on how the sustainable reuse of brownfield properties includes efforts to reduce the environmental impact by reusing and recycling materials generated during building construction, demolition, or renovation.

  7. ADAPTIVE REUSE FOR NEW SOCIAL AND MUNICIPAL FUNCTIONS AS AN ACCEPTABLE APPROACH FOR CONSERVATION OF INDUSTRIAL HERITAGE ARCHITECTURE IN THE CZECH REPUBLIC

    OpenAIRE

    Oleg Fetisov

    2016-01-01

    The present paper deals with a problem of conservation and adaptive reuse of industrial heritage architecture. The relevance and topicality of the problem of adaptive reuse of industrial heritage architecture for new social and municipal functions as the conservation concept are defined. New insights on the typology of industrial architecture are reviewed (e. g. global changes in all European industry, new concepts and technologies in manufacturing, new features of industrial architecture and...

  8. Adaptation of Agile Project Management Methodology for Project Team

    Directory of Open Access Journals (Sweden)

    Rasnacis Arturs

    2015-12-01

    Full Text Available A project management methodology that defines basic processes, tools, techniques, methods, resources and procedures used to manage a project is necessary for effective and successful IT project management. Each company needs to define its own methodology or adapt some of the existing ones. The purpose of the research is to evaluate the possibilities of adapting IT project development methodology according to the company, company employee characteristics and their mutual relations. The adaptation process will be illustrated with a case study at an IT company in Latvia where the developed methodology is based on Agile Scrum, one of the most widespread Agile methods.

  9. Fire Risk Assessment of Adaptive Re-Use of Historic Shop Houses for Sleeping Accommodations in Malaysia

    Directory of Open Access Journals (Sweden)

    Mydin M.A.O.

    2014-01-01

    Full Text Available Heritage buildings were generally constructed without regard for fire risks or the requirements for fire protection, as are obligatory in new constructions. When a heritage building undergoes a change to its original function, improvements to the building’s fire safety are necessary to meet the needs of possible increases in occupancy loads and to account for fire risks related to the new usage. This research focuses on fire safety risks, fire protection and safety systems as well as the rules and regulations that an adaptive reuse heritage shop house is bound to when transitioning to a sleeping accommodation, which, in this case, means becoming a hotel. In this research, six heritage shop houses were chosen as case studies. The objectives of this research were to evaluate current fire emergency plans as well as to identify and assess possible fire hazards created by adaptive reuse of heritage shop houses to sleeping accommodations in Penang through a series of observations and interviews. The results of the research show that most of the buildings were provided with inadequate fire safety systems.

  10. The Water Reuse project: Sustainable waste water re-use technologies for irrigated land in NIS and southern European states; project overview and results.

    Science.gov (United States)

    van den Elsen, E.; Doerr, S.; Ritsema, C. J.

    2009-04-01

    In irrigated areas in the New Independent States (NIS) and southern European States, inefficient use of conventional water resources occurs through incomplete wetting of soils, which causes accelerated runoff and preferential flow, and also through excessive evaporation associated with unhindered capillary rise. Furthermore, a largely unexploited potential exists to save conventional irrigation water by supplementation with organic-rich waste water, which, if used appropriately, can also lead to improvements to soil physical properties and soil nutrient and organic matter content. This project aims to (a) reduce irrigation water losses by developing, evaluating and promoting techniques that improve the wetting properties of soils, and (b) investigate the use of organic-rich waste water as a non-conventional water resource in irrigation and, in addition, as a tool in improving soil physical properties and soil nutrient and organic matter content. Key activities include (i) identifying, for the NIS and southern European partner countries, the soil type/land use combinations, for which the above approaches are expected to be most effective and their implementation most feasible, using physical and socio-economic research methods, and (ii) examining the water saving potential, physical, biological and chemical effects on soils of the above approaches, and also their impact on performance. Expected outputs include techniques for sustainable improvements in soil wettability management as a novel approach in water saving, detailed evaluation of the prospects and effects of using supplemental organic-rich waste waters in irrigation, an advanced process-based numerical hydrological model, fully adapted to quantify and upscale resulting water savings and nutrient and potential contaminant fluxes for irrigated areas, and identification of suitable areas in the NIS and Mediterranean (in soil, land use, legislative and socio-economic terms) for implementation.

  11. Application of life cycle assessment for an evaluation of wastewater treatment and reuse project--case study of Xi'an, China.

    Science.gov (United States)

    Zhang, Q H; Wang, X C; Xiong, J Q; Chen, R; Cao, B

    2010-03-01

    In order to illuminate the benefit of a wastewater treatment and reuse project, a life cycle assessment (LCA) model was proposed by combining the process-based LCA and the input-output based LCA in one framework and using energy consumption as the sole parameter for quantitative evaluation of the project. The life cycle consumption was evaluated mainly by life cycle inventory (LCI) analysis taking into account the construction phase, operation phase and demolishment phase of the project. For evaluating the life cycle benefit of treated water reuse, attention was paid to the decrease of secondary effluent discharge and water saving. As a result of comprehensive LCA analysis of a case project in Xi'an, China, it was understood that the life cycle benefit gained from treated wastewater reuse much surpassed the life cycle energy consumption. The advantage of wastewater treatment and reuse was well shown by LCA analysis using the proposed model. 2009 Elsevier Ltd. All rights reserved.

  12. Adaptive projective synchronization between different chaotic ...

    Indian Academy of Sciences (India)

    Numerical simulation results are performed to explain the effectiveness and feasibility of ... analysis of nonlinear dynamics have gained immense popularity during the last few ... applications of projective synchronization is in secure communication [31] due to ... of uncertain chaotic systems using adaptive control method.

  13. Greywater Treatment and Reuse

    Directory of Open Access Journals (Sweden)

    Gökhan Ekrem ÜSTÜN

    2015-07-01

    Full Text Available The aim of this study, to examine grey water treatment and reuse. For this aim, previous literature studies been research on and interpreted. Project began with study of physical, chemical and biological characteristics of the gray water. At the second part; grey water treatment and reuse were examined. At the third part; the technologies used for the methods treatment of gray water were explained. Then from costs and previous studies about grey water reuse were mentioned.

  14. A project of reuse of reclaimed wastewater in the Po Valley, Italy: Polishing sequence and cost benefit analysis

    Science.gov (United States)

    Verlicchi, P.; Al Aukidy, M.; Galletti, A.; Zambello, E.; Zanni, G.; Masotti, L.

    2012-04-01

    SummaryThe paper presents a study carried out in the environmentally sensitive area of the Po Valley in northern Italy, with the aim of evaluating, from technical and economic perspectives, a project to reuse part of the final effluent from the Ferrara wastewater treatment plant for irrigation and to develop the site for recreational purposes. Although this area features plentiful supplies of surface water, the Ministry of the Environment has declared it to be at risk of environmental crises due to eutrophication and the drought recurring over the last decade. Thus the availability of fresh water, particularly for agricultural purposes, is threatened, and prompt water saving and protection measures are required. Hence, the possibility of reusing reclaimed wastewater from this plant was investigated, with the aim of exploiting the space around the WWTP, situated within a large urban park, to install natural polishing treatment systems and create green spaces for recreational use. Based on experimental investigation on a pilot plant (featuring both natural and conventional treatments), the study outlines the rationale behind the treatment train selected for the project, details the initial and ongoing costs involved, evaluates the benefits deriving from the project, and assesses public acceptance of the project by the contingent valuation method. A cost-benefit analysis completes the study, and various economic indicators (net present value, benefit-cost ratio, pay-back period, and internal rate of return) revealed that the proposed project was financially feasible.

  15. Sharing and reusing cardiovascular anatomical models over the Web: a step towards the implementation of the virtual physiological human project.

    Science.gov (United States)

    Gianni, Daniele; McKeever, Steve; Yu, Tommy; Britten, Randall; Delingette, Hervé; Frangi, Alejandro; Hunter, Peter; Smith, Nicolas

    2010-06-28

    Sharing and reusing anatomical models over the Web offers a significant opportunity to progress the investigation of cardiovascular diseases. However, the current sharing methodology suffers from the limitations of static model delivery (i.e. embedding static links to the models within Web pages) and of a disaggregated view of the model metadata produced by publications and cardiac simulations in isolation. In the context of euHeart--a research project targeting the description and representation of cardiovascular models for disease diagnosis and treatment purposes--we aim to overcome the above limitations with the introduction of euHeartDB, a Web-enabled database for anatomical models of the heart. The database implements a dynamic sharing methodology by managing data access and by tracing all applications. In addition to this, euHeartDB establishes a knowledge link with the physiome model repository by linking geometries to CellML models embedded in the simulation of cardiac behaviour. Furthermore, euHeartDB uses the exFormat--a preliminary version of the interoperable FieldML data format--to effectively promote reuse of anatomical models, and currently incorporates Continuum Mechanics, Image Analysis, Signal Processing and System Identification Graphical User Interface (CMGUI), a rendering engine, to provide three-dimensional graphical views of the models populating the database. Currently, euHeartDB stores 11 cardiac geometries developed within the euHeart project consortium.

  16. Reusing Water

    Science.gov (United States)

    Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management System Environmental Outreach Feature Stories Individual Permit for Storm Water Public Reading Room Sustainability » Reusing Water Reusing Water Millions of gallons of industrial wastewater is recycled at LANL by

  17. Adaptation and Re-Use of Spacecraft Power System Models for the Constellation Program

    Science.gov (United States)

    Hojnicki, Jeffrey S.; Kerslake, Thomas W.; Ayres, Mark; Han, Augustina H.; Adamson, Adrian M.

    2008-01-01

    NASA's Constellation Program is embarking on a new era of space exploration, returning to the Moon and beyond. The Constellation architecture will consist of a number of new spacecraft elements, including the Orion crew exploration vehicle, the Altair lunar lander, and the Ares family of launch vehicles. Each of these new spacecraft elements will need an electric power system, and those power systems will need to be designed to fulfill unique mission objectives and to survive the unique environments encountered on a lunar exploration mission. As with any new spacecraft power system development, preliminary design work will rely heavily on analysis to select the proper power technologies, size the power system components, and predict the system performance throughout the required mission profile. Constellation projects have the advantage of leveraging power system modeling developments from other recent programs such as the International Space Station (ISS) and the Mars Exploration Program. These programs have developed mature power system modeling tools, which can be quickly modified to meet the unique needs of Constellation, and thus provide a rapid capability for detailed power system modeling that otherwise would not exist.

  18. Wastewater reuse

    Directory of Open Access Journals (Sweden)

    Milan R. Radosavljević

    2013-12-01

    Full Text Available Water scarcity and water pollution are some of the crucial issues that must be addressed within local and global perspectives. One of the ways to reduce the impact of water scarcity  and to minimizine water pollution is to expand water and wastewater reuse. The local conditions including regulations, institutions, financial mechanisms, availability of local technology and stakeholder participation have a great influence on the decisions for wastewater reuse. The increasing awareness of food safety and the influence of the countries which import food are influencing policy makers and agriculturists to improve the standards of wastewater reuse in agriculture. The environmental awareness of consumers has been putting pressure on the producers (industries to opt for environmentally sound technologies including those which conserve water and reduce the level of pollution. It may be observed that we have to move forwards to implement strategies and plans for wastewater reuse. However, their success and sustainability will depend on political will, public awareness and active support from national and international agencies to create favorable    environment for the promotion of environmentally sustainable technologies. Wastewater treatment has a long history, especially in agriculture, but also in industry and households. Poor quality of wastewater can pose a significant risk to the health of farmers and users of agricultural products. The World Health Organization (WHO is working on a project for the reuse of wastewater in agriculture. To reduce effects of human activities to the minimum, it is necessary to provide such technical and technological solutions that would on the one hand ensure complying with  the existing regulations and legislation, and on the other hand provide economically viable systems as seen through investments and operating costs. The use of wastewater The practice of using wastewater varies from country to country. Its

  19. Climate project screening tool: an aid for climate change adaptation

    Science.gov (United States)

    Toni Lyn Morelli; Sharon Yeh; Nikola M. Smith; Mary Beth Hennessy; Constance I. Millar

    2012-01-01

    To address the impacts of climate change, land managers need techniques for incorporating adaptation into ongoing or impending projects. We present a new tool, the Climate Project Screening Tool (CPST), for integrating climate change considerations into project planning as well as for developing concrete adaptation options for land managers. We designed CPST as part of...

  20. Reduce, Reuse, Recycle: Resources and Strategies for the Use of Writing Projects in Mathematics

    Science.gov (United States)

    Latulippe, Joe; Latulippe, Christine

    2014-01-01

    As an often recommended but under-utilized pedagogical strategy, writing in mathematics has many benefits for students. However, creating and grading worthwhile writing projects can be more time-consuming than utilizing more traditional forms of assessment. This paper provides a concrete example of a writing project prompt, questions, directions,…

  1. Reuse, Repurposing and Learning Design--Lessons from the DART Project

    Science.gov (United States)

    Bond, Stephen T.; Ingram, Caroline; Ryan, Steve

    2008-01-01

    Digital Anthropological Resources for Teaching (DART) is a major project examining ways in which the use of online learning activities and repositories can enhance the teaching of anthropology and, by extension, other disciplines. This paper reports on one strand of DART activity, the development of customisable learning activities that can be…

  2. Wastewater reuse

    OpenAIRE

    Milan R. Radosavljević; Vanja M. Šušteršič

    2013-01-01

    Water scarcity and water pollution are some of the crucial issues that must be addressed within local and global perspectives. One of the ways to reduce the impact of water scarcity  and to minimizine water pollution is to expand water and wastewater reuse. The local conditions including regulations, institutions, financial mechanisms, availability of local technology and stakeholder participation have a great influence on the decisions for wastewater reuse. The increasing awareness of food s...

  3. Adaptive projective synchronization of different chaotic systems with nonlinearity inputs

    International Nuclear Information System (INIS)

    Niu Yu-Jun; Pei Bing-Nan; Wang Xing-Yuan

    2012-01-01

    We investigate the projective synchronization of different chaotic systems with nonlinearity inputs. Based on the adaptive technique, sliding mode control method and pole assignment technique, a novel adaptive projective synchronization scheme is proposed to ensure the drive system and the response system with nonlinearity inputs can be rapidly synchronized up to the given scaling factor. (general)

  4. Developing improved opportunities for the recycle and reuse of materials in road, bridge and construction projects : [summary].

    Science.gov (United States)

    2014-01-01

    Reducing waste and reusing materials is now : a part of the everyday fabric of life. Recycling : glass, paper, and plastic is an activity in many : households and businesses. Similarly, the : transportation sector generates huge quantities : of concr...

  5. Large Scale Analyses and Visualization of Adaptive Amino Acid Changes Projects.

    Science.gov (United States)

    Vázquez, Noé; Vieira, Cristina P; Amorim, Bárbara S R; Torres, André; López-Fernández, Hugo; Fdez-Riverola, Florentino; Sousa, José L R; Reboiro-Jato, Miguel; Vieira, Jorge

    2018-03-01

    When changes at few amino acid sites are the target of selection, adaptive amino acid changes in protein sequences can be identified using maximum-likelihood methods based on models of codon substitution (such as codeml). Although such methods have been employed numerous times using a variety of different organisms, the time needed to collect the data and prepare the input files means that tens or hundreds of coding regions are usually analyzed. Nevertheless, the recent availability of flexible and easy to use computer applications that collect relevant data (such as BDBM) and infer positively selected amino acid sites (such as ADOPS), means that the entire process is easier and quicker than before. However, the lack of a batch option in ADOPS, here reported, still precludes the analysis of hundreds or thousands of sequence files. Given the interest and possibility of running such large-scale projects, we have also developed a database where ADOPS projects can be stored. Therefore, this study also presents the B+ database, which is both a data repository and a convenient interface that looks at the information contained in ADOPS projects without the need to download and unzip the corresponding ADOPS project file. The ADOPS projects available at B+ can also be downloaded, unzipped, and opened using the ADOPS graphical interface. The availability of such a database ensures results repeatability, promotes data reuse with significant savings on the time needed for preparing datasets, and effortlessly allows further exploration of the data contained in ADOPS projects.

  6. Adapting Project Management Practices to Research-Based Projects

    Science.gov (United States)

    Bahr, P.; Baker, T.; Corbin, B.; Keith, L.; Loerch, L.; Mullenax, C.; Myers, R.; Rhodes, B.; Skytland, N.

    2007-01-01

    From dealing with the inherent uncertainties in outcomes of scientific research to the lack of applicability of current NASA Procedural Requirements guidance documentation, research-based projects present challenges that require unique application of classical project management techniques. If additionally challenged by the creation of a new program transitioning from basic to applied research in a technical environment often unfamiliar with the cost and schedule constraints addressed by project management practices, such projects can find themselves struggling throughout their life cycles. Finally, supplying deliverables to a prime vehicle customer, also in the formative stage, adds further complexity to the development and management of research-based projects. The Biomedical Research and Countermeasures Projects Branch at NASA Johnson Space Center encompasses several diverse applied research-based or research-enabling projects within the newly-formed Human Research Program. This presentation will provide a brief overview of the organizational structure and environment in which these projects operate and how the projects coordinate to address and manage technical requirements. We will identify several of the challenges (cost, technical, schedule, and personnel) encountered by projects across the Branch, present case reports of actions taken and techniques implemented to deal with these challenges, and then close the session with an open forum discussion of remaining challenges and potential mitigations.

  7. Adaptively Addressing Uncertainty in Estuarine and Near Coastal Restoration Projects

    Energy Technology Data Exchange (ETDEWEB)

    Thom, Ronald M.; Williams, Greg D.; Borde, Amy B.; Southard, John A.; Sargeant, Susan L.; Woodruff, Dana L.; Laufle, Jeffrey C.; Glasoe, Stuart

    2005-03-01

    Restoration projects have an uncertain outcome because of a lack of information about current site conditions, historical disturbance levels, effects of landscape alterations on site development, unpredictable trajectories or patterns of ecosystem structural development, and many other factors. A poor understanding of the factors that control the development and dynamics of a system, such as hydrology, salinity, wave energies, can also lead to an unintended outcome. Finally, lack of experience in restoring certain types of systems (e.g., rare or very fragile habitats) or systems in highly modified situations (e.g., highly urbanized estuaries) makes project outcomes uncertain. Because of these uncertainties, project costs can rise dramatically in an attempt to come closer to project goals. All of the potential sources of error can be addressed to a certain degree through adaptive management. The first step is admitting that these uncertainties can exist, and addressing as many of the uncertainties with planning and directed research prior to implementing the project. The second step is to evaluate uncertainties through hypothesis-driven experiments during project implementation. The third step is to use the monitoring program to evaluate and adjust the project as needed to improve the probability of the project to reach is goal. The fourth and final step is to use the information gained in the project to improve future projects. A framework that includes a clear goal statement, a conceptual model, and an evaluation framework can help in this adaptive restoration process. Projects and programs vary in their application of adaptive management in restoration, and it is very difficult to be highly prescriptive in applying adaptive management to projects that necessarily vary widely in scope, goal, ecosystem characteristics, and uncertainties. Very large ecosystem restoration programs in the Mississippi River delta (Coastal Wetlands Planning, Protection, and Restoration

  8. Incorporating adaptive responses into future projections of coral bleaching.

    Science.gov (United States)

    Logan, Cheryl A; Dunne, John P; Eakin, C Mark; Donner, Simon D

    2014-01-01

    Climate warming threatens to increase mass coral bleaching events, and several studies have projected the demise of tropical coral reefs this century. However, recent evidence indicates corals may be able to respond to thermal stress though adaptive processes (e.g., genetic adaptation, acclimatization, and symbiont shuffling). How these mechanisms might influence warming-induced bleaching remains largely unknown. This study compared how different adaptive processes could affect coral bleaching projections. We used the latest bias-corrected global sea surface temperature (SST) output from the NOAA/GFDL Earth System Model 2 (ESM2M) for the preindustrial period through 2100 to project coral bleaching trajectories. Initial results showed that, in the absence of adaptive processes, application of a preindustrial climatology to the NOAA Coral Reef Watch bleaching prediction method overpredicts the present-day bleaching frequency. This suggests that corals may have already responded adaptively to some warming over the industrial period. We then modified the prediction method so that the bleaching threshold either permanently increased in response to thermal history (e.g., simulating directional genetic selection) or temporarily increased for 2-10 years in response to a bleaching event (e.g., simulating symbiont shuffling). A bleaching threshold that changes relative to the preceding 60 years of thermal history reduced the frequency of mass bleaching events by 20-80% compared with the 'no adaptive response' prediction model by 2100, depending on the emissions scenario. When both types of adaptive responses were applied, up to 14% more reef cells avoided high-frequency bleaching by 2100. However, temporary increases in bleaching thresholds alone only delayed the occurrence of high-frequency bleaching by ca. 10 years in all but the lowest emissions scenario. Future research should test the rate and limit of different adaptive responses for coral species across latitudes and

  9. Quantifying Functional Reuse from Object Oriented Requirements Specifications

    NARCIS (Netherlands)

    Condori-Fernandez, Nelly; Condori-Fernández, N.; Pastor, O; Daneva, Maia; Abran, A.; Castro, J.; Quer, C.; Carvallo, J. B.; Fernandes da Silva, L.

    2008-01-01

    Software reuse is essential in improving efficiency and productivity in the software development process. This paper analyses reuse within requirements engineering phase by taking and adapting a standard functional size measurement method, COSMIC FFP. Our proposal attempts to quantify reusability

  10. Projection Operator: A Step Towards Certification of Adaptive Controllers

    Science.gov (United States)

    Larchev, Gregory V.; Campbell, Stefan F.; Kaneshige, John T.

    2010-01-01

    One of the major barriers to wider use of adaptive controllers in commercial aviation is the lack of appropriate certification procedures. In order to be certified by the Federal Aviation Administration (FAA), an aircraft controller is expected to meet a set of guidelines on functionality and reliability while not negatively impacting other systems or safety of aircraft operations. Due to their inherent time-variant and non-linear behavior, adaptive controllers cannot be certified via the metrics used for linear conventional controllers, such as gain and phase margin. Projection Operator is a robustness augmentation technique that bounds the output of a non-linear adaptive controller while conforming to the Lyapunov stability rules. It can also be used to limit the control authority of the adaptive component so that the said control authority can be arbitrarily close to that of a linear controller. In this paper we will present the results of applying the Projection Operator to a Model-Reference Adaptive Controller (MRAC), varying the amount of control authority, and comparing controller s performance and stability characteristics with those of a linear controller. We will also show how adjusting Projection Operator parameters can make it easier for the controller to satisfy the certification guidelines by enabling a tradeoff between controller s performance and robustness.

  11. Adaptive Knowledge Management of Project-Based Learning

    Science.gov (United States)

    Tilchin, Oleg; Kittany, Mohamed

    2016-01-01

    The goal of an approach to Adaptive Knowledge Management (AKM) of project-based learning (PBL) is to intensify subject study through guiding, inducing, and facilitating development knowledge, accountability skills, and collaborative skills of students. Knowledge development is attained by knowledge acquisition, knowledge sharing, and knowledge…

  12. On adaptive modified projective synchronization of a supply chain ...

    Indian Academy of Sciences (India)

    Hamed Tirandaz

    2017-11-23

    Nov 23, 2017 ... A novel adaptive modified projective synchronization method is ... bances, and so these methods are usually of no use. To ...... [53] S E Fawcett and M A Waller, J. Business Logistics 32(1), ... Research Appl. 12(5), 347 (2009).

  13. Architectures of adaptive integration in large collaborative projects

    Directory of Open Access Journals (Sweden)

    Lois Wright Morton

    2015-12-01

    Full Text Available Collaborations to address complex societal problems associated with managing human-natural systems often require large teams comprised of scientists from multiple disciplines. For many such problems, large-scale, transdisciplinary projects whose members include scientists, stakeholders, and other professionals are necessary. The success of very large, transdisciplinary projects can be facilitated by attending to the diversity of types of collaboration that inevitably occur within them. As projects progress and evolve, the resulting dynamic collaborative heterogeneity within them constitutes architectures of adaptive integration (AAI. Management that acknowledges this dynamic and fosters and promotes awareness of it within a project can better facilitate the creativity and innovation required to address problems from a systems perspective. In successful large projects, AAI (1 functionally meets objectives and goals, (2 uses disciplinary expertise and concurrently bridges many disciplines, (3 has mechanisms to enable connection, (4 delineates boundaries to keep focus but retain flexibility, (5 continuously monitors and adapts, and (6 encourages project-wide awareness. These principles are illustrated using as case studies three large climate change and agriculture projects funded by the U.S. Department of Agriculture-National Institute of Food and Agriculture.

  14. Los Angeles County Metropolitan Transportation Authority climate change adaptation pilot project report.

    Science.gov (United States)

    2013-08-01

    This Climate Change Adaptation Pilot Project Report details the project background of the recently-completed Los Angeles County : Metropolitan Transportation Authority (Metro) Transit Climate Change Adaptation Pilot Project as well as the various wor...

  15. Urban regeneration in the context of climate change, on the example of adaptive re-use of the military complex in the Bela Crkva

    Directory of Open Access Journals (Sweden)

    Manić Božidar

    2015-01-01

    Full Text Available The challenges of sustainable development and climate change open up the new possibilities in understanding the importance, principles and methodologies of urban renewal. The paper discusses the problem of abandoned buildings and complexes and their possible reuse in the context of climate change and sustainability at an example of the study of repurposing the military barracks complex in Bela Crkva conducted in the Institute of Architecture and Urban & Spatial Planning of Serbia in 2012. The conceptual solution of the variant 2, based on the idea of climate-aware and socially responsible design, has been embedded into the basic program scheme of the new complex, which includes the establishment of a university campus, construction of experimental social housing, cultural and artistic facilities, as well as urban agriculture, including the use of alternative energy sources and respecting the principles of energy efficiency. The problems of the abandonment of military buildings and complexes, as well as the recommendations for their adaptation, taking into account the past experience and the current environmental problems, are pointed out in the concluding remarks.

  16. Generalized projective synchronization of chaotic systems via adaptive learning control

    International Nuclear Information System (INIS)

    Yun-Ping, Sun; Jun-Min, Li; Hui-Lin, Wang; Jiang-An, Wang

    2010-01-01

    In this paper, a learning control approach is applied to the generalized projective synchronisation (GPS) of different chaotic systems with unknown periodically time-varying parameters. Using the Lyapunov–Krasovskii functional stability theory, a differential-difference mixed parametric learning law and an adaptive learning control law are constructed to make the states of two different chaotic systems asymptotically synchronised. The scheme is successfully applied to the generalized projective synchronisation between the Lorenz system and Chen system. Moreover, numerical simulations results are used to verify the effectiveness of the proposed scheme. (general)

  17. How Useful Are Climate Projections for Adaptation Decision Making?

    Science.gov (United States)

    Smith, J. B.; Vogel, J. M.

    2011-12-01

    Decision making is often portrayed as a linear process that assumes scientific knowledge is a necessary precursor to effective policy and is used directly in policy making. Yet, in practice, the use of scientific information in decision making is more complex than the linear model implies. The use of climate projections in adaptation decision making is a case in point. This paper briefly reviews efforts by some decision makers to understand climate change risks and to apply this knowledge when making decisions on management of climate sensitive resources and infrastructure . In general, and in spite of extensive efforts to study climate change at the regional and local scale to support decision making, few decisions outside of adapting to sea level rise appear to directly apply to climate change projections. A number of U.S. municipalities and states, including Seattle, New York City, Phoenix, and the States of California and Washington, have used climate change projections to assess their vulnerability to various climate change impacts. Some adaptation decisions have been made based on projections of sea level rise, such as change in location of infrastructure. This may be because a future rise is sea level is virtually certain. In contrast, decision making on precipitation has been more limited, even where there is consensus on likely changes in sign of the variable. Nonetheless, decision makers are adopting strategies that can be justified based on current climate and climate variability and that also reduce risks to climate change. A key question for the scientific community is whether improved projections will add value to decision making. For example, it remains unclear how higher-resolution projections can change decision making as long as the sign and magnitude of projections across climate models and downscaling techniques retains a wide range of uncertainty. It is also unclear whether even better information on the sign and magnitude of change would

  18. Adapt! – Agile Project Management Supported by Axiomatic Design

    Directory of Open Access Journals (Sweden)

    Weber Jakob

    2017-01-01

    Full Text Available This paper presents a novel approach for the use of Axiomatic Design Theory in combination with agile project management methods like Scrum for an effective, structured and combined product design and development process. Agile project management methods give a guideline how to manage a project, but there is only minor assistance regarding the actual product development process itself. Axiomatic Design can be used to support these methods in this point. In concrete terms, the results of the decomposition process of this theory can be used to formulate and structure the work packages for the agile project managing process. The Independence Axiom of Axiomatic Design Theory has a substantial contribution by ensuring the independence of the work packages which can be assigned to different project team members and can be processed independently by them. The combination of the different methods not only helps to ensure a good design solution but also helps to work more agile within a project team. The here proposed approach is one part of a holistic product design and development process for changeable production units – called Adapt! – and is described within a use case in the automotive sector.

  19. Selecting downscaled climate projections for water resource impacts and adaptation

    Science.gov (United States)

    Vidal, Jean-Philippe; Hingray, Benoît

    2015-04-01

    Increasingly large ensembles of global and regional climate projections are being produced and delivered to the climate impact community. However, such an enormous amount of information can hardly been dealt with by some impact models due to computational constraints. Strategies for transparently selecting climate projections are therefore urgently needed for informing small-scale impact and adaptation studies and preventing potential pitfalls in interpreting ensemble results from impact models. This work proposes results from a selection approach implemented for an integrated water resource impact and adaptation study in the Durance river basin (Southern French Alps). A large ensemble of 3000 daily transient gridded climate projections was made available for this study. It was built from different runs of 4 ENSEMBLES Stream2 GCMs, statistically downscaled by 3 probabilistic methods based on the K-nearest neighbours resampling approach (Lafaysse et al., 2014). The selection approach considered here exemplifies one of the multiple possible approaches described in a framework for identifying tailored subsets of climate projections for impact and adaptation studies proposed by Vidal & Hingray (2014). It was chosen based on the specificities of both the study objectives and the characteristics of the projection dataset. This selection approach aims at propagating as far as possible the relative contributions of the four different sources of uncertainties considered, namely GCM structure, large-scale natural variability, structure of the downscaling method, and catchment-scale natural variability. Moreover, it took the form of a hierarchical structure to deal with the specific constraints of several types of impact models (hydrological models, irrigation demand models and reservoir management models). The implemented 3-layer selection approach is therefore mainly based on conditioned Latin Hypercube sampling (Christierson et al., 2012). The choice of conditioning

  20. Distance Adaptive Tensor Discriminative Geometry Preserving Projection for Face Recognition

    Directory of Open Access Journals (Sweden)

    Ziqiang Wang

    2012-09-01

    Full Text Available There is a growing interest in dimensionality reduction techniques for face recognition, however, the traditional dimensionality reduction algorithms often transform the input face image data into vectors before embedding. Such vectorization often ignores the underlying data structure and leads to higher computational complexity. To effectively cope with these problems, a novel dimensionality reduction algorithm termed distance adaptive tensor discriminative geometry preserving projection (DATDGPP is proposed in this paper. The key idea of DATDGPP is as follows: first, the face image data are directly encoded in high-order tensor structure so that the relationships among the face image data can be preserved; second, the data-adaptive tensor distance is adopted to model the correlation among different coordinates of tensor data; third, the transformation matrix which can preserve discrimination and local geometry information is obtained by an iteration algorithm. Experimental results on three face databases show that the proposed algorithm outperforms other representative dimensionality reduction algorithms.

  1. Stanovich's arguments against the "adaptive rationality" project: An assessment.

    Science.gov (United States)

    Polonioli, Andrea

    2015-02-01

    This paper discusses Stanovich's appeal to individual differences in reasoning and decision-making to undermine the "adaptive rationality" project put forth by Gigerenzer and his co-workers. I discuss two different arguments based on Stanovich's research. First, heterogeneity in the use of heuristics seems to be at odds with the adaptationist background of the project. Second, the existence of correlations between cognitive ability and susceptibility to cognitive bias suggests that the "standard picture of rationality" (Stein, 1996, 4) is normatively adequate. I argue that, as matters stand, none of the arguments can be seen as fully compelling. Nevertheless, my discussion is not only critical of Stanovich's research, as I also show that (and how) his research can push forward the so-called "rationality debate" by encouraging greater theoretical and experimental work. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Theory of affine projection algorithms for adaptive filtering

    CERN Document Server

    Ozeki, Kazuhiko

    2016-01-01

    This book focuses on theoretical aspects of the affine projection algorithm (APA) for adaptive filtering. The APA is a natural generalization of the classical, normalized least-mean-squares (NLMS) algorithm. The book first explains how the APA evolved from the NLMS algorithm, where an affine projection view is emphasized. By looking at those adaptation algorithms from such a geometrical point of view, we can find many of the important properties of the APA, e.g., the improvement of the convergence rate over the NLMS algorithm especially for correlated input signals. After the birth of the APA in the mid-1980s, similar algorithms were put forward by other researchers independently from different perspectives. This book shows that they are variants of the APA, forming a family of APAs. Then it surveys research on the convergence behavior of the APA, where statistical analyses play important roles. It also reviews developments of techniques to reduce the computational complexity of the APA, which are important f...

  3. Online Sequential Projection Vector Machine with Adaptive Data Mean Update.

    Science.gov (United States)

    Chen, Lin; Jia, Ji-Ting; Zhang, Qiong; Deng, Wan-Yu; Wei, Wei

    2016-01-01

    We propose a simple online learning algorithm especial for high-dimensional data. The algorithm is referred to as online sequential projection vector machine (OSPVM) which derives from projection vector machine and can learn from data in one-by-one or chunk-by-chunk mode. In OSPVM, data centering, dimension reduction, and neural network training are integrated seamlessly. In particular, the model parameters including (1) the projection vectors for dimension reduction, (2) the input weights, biases, and output weights, and (3) the number of hidden nodes can be updated simultaneously. Moreover, only one parameter, the number of hidden nodes, needs to be determined manually, and this makes it easy for use in real applications. Performance comparison was made on various high-dimensional classification problems for OSPVM against other fast online algorithms including budgeted stochastic gradient descent (BSGD) approach, adaptive multihyperplane machine (AMM), primal estimated subgradient solver (Pegasos), online sequential extreme learning machine (OSELM), and SVD + OSELM (feature selection based on SVD is performed before OSELM). The results obtained demonstrated the superior generalization performance and efficiency of the OSPVM.

  4. Online Sequential Projection Vector Machine with Adaptive Data Mean Update

    Directory of Open Access Journals (Sweden)

    Lin Chen

    2016-01-01

    Full Text Available We propose a simple online learning algorithm especial for high-dimensional data. The algorithm is referred to as online sequential projection vector machine (OSPVM which derives from projection vector machine and can learn from data in one-by-one or chunk-by-chunk mode. In OSPVM, data centering, dimension reduction, and neural network training are integrated seamlessly. In particular, the model parameters including (1 the projection vectors for dimension reduction, (2 the input weights, biases, and output weights, and (3 the number of hidden nodes can be updated simultaneously. Moreover, only one parameter, the number of hidden nodes, needs to be determined manually, and this makes it easy for use in real applications. Performance comparison was made on various high-dimensional classification problems for OSPVM against other fast online algorithms including budgeted stochastic gradient descent (BSGD approach, adaptive multihyperplane machine (AMM, primal estimated subgradient solver (Pegasos, online sequential extreme learning machine (OSELM, and SVD + OSELM (feature selection based on SVD is performed before OSELM. The results obtained demonstrated the superior generalization performance and efficiency of the OSPVM.

  5. Learning Unknown Structure in CRFs via Adaptive Gradient Projection Method

    Directory of Open Access Journals (Sweden)

    Wei Xue

    2016-08-01

    Full Text Available We study the problem of fitting probabilistic graphical models to the given data when the structure is not known. More specifically, we focus on learning unknown structure in conditional random fields, especially learning both the structure and parameters of a conditional random field model simultaneously. To do this, we first formulate the learning problem as a convex minimization problem by adding an l_2-regularization to the node parameters and a group l_1-regularization to the edge parameters, and then a gradient-based projection method is proposed to solve it which combines an adaptive stepsize selection strategy with a nonmonotone line search. Extensive simulation experiments are presented to show the performance of our approach in solving unknown structure learning problems.

  6. HydroShare for iUTAH: Collaborative Publication, Interoperability, and Reuse of Hydrologic Data and Models for a Large, Interdisciplinary Water Research Project

    Science.gov (United States)

    Horsburgh, J. S.; Jones, A. S.

    2016-12-01

    Data and models used within the hydrologic science community are diverse. New research data and model repositories have succeeded in making data and models more accessible, but have been, in most cases, limited to particular types or classes of data or models and also lack the type of collaborative, and iterative functionality needed to enable shared data collection and modeling workflows. File sharing systems currently used within many scientific communities for private sharing of preliminary and intermediate data and modeling products do not support collaborative data capture, description, visualization, and annotation. More recently, hydrologic datasets and models have been cast as "social objects" that can be published, collaborated around, annotated, discovered, and accessed. Yet it can be difficult using existing software tools to achieve the kind of collaborative workflows and data/model reuse that many envision. HydroShare is a new, web-based system for sharing hydrologic data and models with specific functionality aimed at making collaboration easier and achieving new levels of interactive functionality and interoperability. Within HydroShare, we have developed new functionality for creating datasets, describing them with metadata, and sharing them with collaborators. HydroShare is enabled by a generic data model and content packaging scheme that supports describing and sharing diverse hydrologic datasets and models. Interoperability among the diverse types of data and models used by hydrologic scientists is achieved through the use of consistent storage, management, sharing, publication, and annotation within HydroShare. In this presentation, we highlight and demonstrate how the flexibility of HydroShare's data model and packaging scheme, HydroShare's access control and sharing functionality, and versioning and publication capabilities have enabled the sharing and publication of research datasets for a large, interdisciplinary water research project

  7. Decentralized sanitation and reuse in Dutch Society: social opportunities and risks : final report for the EET-DESAR project, Wageningen, 1 January 2008

    NARCIS (Netherlands)

    Hegger, D.L.T.; Vliet, van B.J.M.; Spaargaren, G.

    2008-01-01

    The diffusion and acceptation of decentralized sanitation and reuse (DESAR) technologies requires major changes in the social technological systems of water provision and wastewater treatment. The radical shift away from the basic principles of sewer technology justifies the term technological

  8. Managing project complexity : A study into adapting early project phases to improve project performance in large engineering projects

    NARCIS (Netherlands)

    Bosch-Rekveldt, M.G.C.

    2011-01-01

    Engineering projects become increasingly more complex and project complexity is assumed to be one of the causes for projects being delivered late and over budget. However, what this project complexity actually comprised of was unclear. To improve the overall project performance, this study focuses

  9. The rationality of intuition: Studying adaptive heuristics in project decision-making

    DEFF Research Database (Denmark)

    Stingl, Verena; Geraldi, Joana

    This paper presents a research agenda for studying adaptive heuristics in project decision making. Project decisions are a potentially fruitful research field for adaptive heuristics. These decisions typically take place under time and information constraints, with high complexity and ambiguity...... - environments in which adaptive heuristics typically strive as effective decision tools. Yet, project decisions as a research topic introduce challenges that are currently not considered in the main body of adaptive heuristics research: the issue of group decision making, and the element of an unpredictable...... the limitations of these methods for project decision-making, and suggests alternative methodologies, suitable to cope with group decision-making and irreducible uncertainty....

  10. Classification and Comparison of Architecture Evolution Reuse Knowledge - A Systematic Review

    DEFF Research Database (Denmark)

    Ahmad, Aakash; Jamshidi, Pooyan; Pahl, Claus

    2014-01-01

    patterns (34% of selected studies) represent a predominant solution, followed by evolution styles (25%) and adaptation strategies and policies (22%) to enable application of reuse knowledge. Empirical methods for acquisition of reuse knowledge represent 19% including pattern discovery, configuration...

  11. How Governance Regimes Shape the Implementation of Water Reuse Schemes

    Directory of Open Access Journals (Sweden)

    Jos Frijns

    2016-12-01

    Full Text Available The governance dimensions of water reuse scheme development and operation, such as policies and regulatory frameworks, and public involvement and stakeholder collaboration, can serve to both facilitate and constrain wider adoption of water reuse practices. This paper explores the significance and underlying structure of the key governance challenges facing the water reuse sector in Europe. It presents empirical evidence from interviews and focus group sessions conducted at four water reuse schemes: an indirect potable reuse scheme at Torreele (Belgium, the urban reuse of treated municipal wastewater at the London Olympic Park (United Kingdom and at Sabadell (Spain, and the reuse of agro-industrial effluent for irrigation at Capitanata (Italy. The findings underscore the importance of clarity in policy arrangements around water reuse, as well as of the financial competitiveness of reuse projects compared to alternative water supply options. Operators of water reuse schemes expressed a preference for water quality standards, which focus on appropriateness for use rather than over-emphasise the waters’ origin so that unnecessary treatment and costs can be avoided. Positive public support was widely acknowledged as an important factor in the success or failure of water reuse schemes. We conclude that constructive institutional relationships underpin many of the challenges faced by reuse scheme operators and that greater emphasis should be given to building confidence and gaining trust in water service providers through early identification of how governance regimes shape the viability of new schemes.

  12. Water Reuse Reconsidered

    Science.gov (United States)

    Environmental Science and Technology, 1975

    1975-01-01

    The Second National Conference on Complete WateReuse stressed better planning, management, and use of water. The sessions covered: water reuse and its problems; water's interface with air and land, and modification of these interactions by the imposition of energy; and heavy metals in the environment and methods for their removal. (BT)

  13. Water Reclamation and Reuse.

    Science.gov (United States)

    Smith, Daniel W.

    1978-01-01

    Presents a literature review of water reclamation and reuse. This review covers: (1) water resources planning; (2) agriculture and irrigation; (3) ground recharge; (4) industrial reuse; (5) health considerations; and (6) technology developments. A list of 217 references is also presented. (HM)

  14. Adaptive function projective synchronization of two-cell Quantum-CNN chaotic oscillators with uncertain parameters

    International Nuclear Information System (INIS)

    Sudheer, K. Sebastian; Sabir, M.

    2009-01-01

    This work investigates function projective synchronization of two-cell Quantum-CNN chaotic oscillators using adaptive method. Quantum-CNN oscillators produce nano scale chaotic oscillations under certain conditions. By Lyapunove stability theory, the adaptive control law and the parameter update law are derived to make the state of two chaotic systems function projective synchronized. Numerical simulations are presented to demonstrate the effectiveness of the proposed adaptive controllers.

  15. Treated Wastewater Reuse on Potato (Solanum Tuberosum)

    DEFF Research Database (Denmark)

    Battilani, A; Plauborg, Finn; Andersen, Mathias Neumann

    2014-01-01

    A field experiment was carried out in Northern Italy (Po Valley), within the frame of the EU project SAFIR, to asses the impact of treated wastewater reuse on potato yield, quality and hygiene. The potato crop was drip irrigated and fertigated. Wastewater produced by small communities (≤2000 EI......) was treated by Membrane Bio Reactor (MBR) technology and gravel filter (FTS) during three cropping seasons. Treated wastewater, soil and tubers were analysed for the faecal indicator bacterium E. coli and heavy metals contents. Potato total yield was similar for tap and reused water, while the marketable...... production has been found higher with the latter. The tuber dry matter content as well as reducing sugars were not affected by reused water. Total sugars content was higher with MBR and FTS water. Water use efficiency (WUE) was significantly higher with reused water. Compared to tap water, crop gross margin...

  16. Failure of large transformation projects from the viewpoint of complex adaptive systems: Management principles for dealing with project dynamics

    NARCIS (Netherlands)

    Janssen, M.; Voort, H. van der; Veenstra, A.F.E. van

    2015-01-01

    Many large transformation projects do not result in the outcomes desired or envisioned by the stakeholders. This type of project is characterised by dynamics which are both caused by and result of uncertainties and unexpected behaviour. In this paper a complex adaptive system (CAS) view was adopted

  17. Accounting for adaptation and intensity in projecting heat wave-related mortality.

    Science.gov (United States)

    Wang, Yan; Nordio, Francesco; Nairn, John; Zanobetti, Antonella; Schwartz, Joel D

    2018-02-01

    How adaptation and intensity of heat waves affect heat wave-related mortality is unclear, making health projections difficult. We estimated the effect of heat waves, the effect of the intensity of heat waves, and adaptation on mortality in 209 U.S. cities with 168 million people during 1962-2006. We improved the standard time-series models by incorporating the intensity of heat waves using excess heat factor (EHF) and estimating adaptation empirically using interactions with yearly mean summer temperature (MST). We combined the epidemiological estimates for heat wave, intensity, and adaptation with the Coupled Model Intercomparison Project Phase 5 (CMIP5) multi-model dataset to project heat wave-related mortality by 2050. The effect of heat waves increased with its intensity. Adaptation to heat waves occurred, which was shown by the decreasing effect of heat waves with MST. However, adaptation was lessened as MST increased. Ignoring adaptation in projections would result in a substantial overestimate of the projected heat wave-related mortality (by 277-747% in 2050). Incorporating the empirically estimated adaptation into projections would result in little change in the projected heat wave-related mortality between 2006 and 2050. This differs regionally, however, with increasing mortality over time for cities in the southern and western U.S. but decreasing mortality over time for the north. Accounting for adaptation is important to reduce bias in the projections of heat wave-related mortality. The finding that the southern and western U.S. are the areas that face increasing heat-related deaths is novel, and indicates that more regional adaptation strategies are needed. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Reduce, reuse and recycle

    CSIR Research Space (South Africa)

    Afrika, M

    2010-10-01

    Full Text Available The adoption of the internationally accepted waste management hierarchy (Sakai et al, 1996) into South African policy has changed the focus from “end of pipe” waste management towards waste minimisation (reuse, recycling and cleaner production...

  19. Water Reuse: Using Reclaimed Water For Irrigation

    OpenAIRE

    Haering, Kathryn; Evanylo, Gregory K.; Benham, Brian Leslie, 1960-; Goatley, Michael

    2009-01-01

    Describes water reuse and reclaimed water, explains how reclaimed water is produced, options for water reuse, water reuse regulations, and agronomic concerns with water reuse, and provides several case studies of water reuse.

  20. Towards Adaptive Urban Water Management: Up-Scaling Local Projects

    DEFF Research Database (Denmark)

    Zhou, Qianqian; Quitzau, Maj-Britt; Hoffmann, Birgitte

    2013-01-01

    Increasingly, the need for adaptive urban water management approaches is advertised, but the transition towards such approaches in the urban water sector seems to be slow. The purpose of this paper is to provide an in-depth study of how an innovative approach has been adopted in practice by looking...... of rainwater. This insight into the processes of learning aggregation of water practices points towards the important role that the dedicated work performed by local facilitators and intermediaries play in relation to a transition towards more adaptive urban water management....

  1. Addressing Climate Change Mitigation and Adaptation Together: A Global Assessment of Agriculture and Forestry Projects

    Science.gov (United States)

    Kongsager, Rico; Locatelli, Bruno; Chazarin, Florie

    2016-02-01

    Adaptation and mitigation share the ultimate purpose of reducing climate change impacts. However, they tend to be considered separately in projects and policies because of their different objectives and scales. Agriculture and forestry are related to both adaptation and mitigation: they contribute to greenhouse gas emissions and removals, are vulnerable to climate variations, and form part of adaptive strategies for rural livelihoods. We assessed how climate change project design documents (PDDs) considered a joint contribution to adaptation and mitigation in forestry and agriculture in the tropics, by analyzing 201 PDDs from adaptation funds, mitigation instruments, and project standards [e.g., climate community and biodiversity (CCB)]. We analyzed whether PDDs established for one goal reported an explicit contribution to the other (i.e., whether mitigation PDDs contributed to adaptation and vice versa). We also examined whether the proposed activities or expected outcomes allowed for potential contributions to the two goals. Despite the separation between the two goals in international and national institutions, 37 % of the PDDs explicitly mentioned a contribution to the other objective, although only half of those substantiated it. In addition, most adaptation (90 %) and all mitigation PDDs could potentially report a contribution to at least partially to the other goal. Some adaptation project developers were interested in mitigation for the prospect of carbon funding, whereas mitigation project developers integrated adaptation to achieve greater long-term sustainability or to attain CCB certification. International and national institutions can provide incentives for projects to harness synergies and avoid trade-offs between adaptation and mitigation.

  2. Addressing Climate Change Mitigation and Adaptation Together: A Global Assessment of Agriculture and Forestry Projects.

    Science.gov (United States)

    Kongsager, Rico; Locatelli, Bruno; Chazarin, Florie

    2016-02-01

    Adaptation and mitigation share the ultimate purpose of reducing climate change impacts. However, they tend to be considered separately in projects and policies because of their different objectives and scales. Agriculture and forestry are related to both adaptation and mitigation: they contribute to greenhouse gas emissions and removals, are vulnerable to climate variations, and form part of adaptive strategies for rural livelihoods. We assessed how climate change project design documents (PDDs) considered a joint contribution to adaptation and mitigation in forestry and agriculture in the tropics, by analyzing 201 PDDs from adaptation funds, mitigation instruments, and project standards [e.g., climate community and biodiversity (CCB)]. We analyzed whether PDDs established for one goal reported an explicit contribution to the other (i.e., whether mitigation PDDs contributed to adaptation and vice versa). We also examined whether the proposed activities or expected outcomes allowed for potential contributions to the two goals. Despite the separation between the two goals in international and national institutions, 37% of the PDDs explicitly mentioned a contribution to the other objective, although only half of those substantiated it. In addition, most adaptation (90%) and all mitigation PDDs could potentially report a contribution to at least partially to the other goal. Some adaptation project developers were interested in mitigation for the prospect of carbon funding, whereas mitigation project developers integrated adaptation to achieve greater long-term sustainability or to attain CCB certification. International and national institutions can provide incentives for projects to harness synergies and avoid trade-offs between adaptation and mitigation.

  3. Sparse Pseudo Spectral Projection Methods with Directional Adaptation for Uncertainty Quantification

    KAUST Repository

    Winokur, J.; Kim, D.; Bisetti, Fabrizio; Le Maî tre, O. P.; Knio, Omar

    2015-01-01

    We investigate two methods to build a polynomial approximation of a model output depending on some parameters. The two approaches are based on pseudo-spectral projection (PSP) methods on adaptively constructed sparse grids, and aim at providing a

  4. Toolbox for uncertainty; Introduction of adaptive heuristics as strategies for project decision making

    DEFF Research Database (Denmark)

    Stingl, Verena; Geraldi, Joana

    2017-01-01

    This article presents adaptive heuristics as an alternative approach to navigate uncertainty in project decision-making. Adaptive heuristic are a class of simple decision strategies that have received only scant attention in project studies. Yet, they can strive in contexts of high uncertainty...... they are ‘ecologically rational’. The model builds on the individual definitions of ecological rationality and organizes them according to two types of uncertainty (‘knowable’ and ‘unknowable’). Decision problems and heuristics are furthermore grouped by decision task (choice and judgement). The article discusses...... and limited information, which are the typical project decision context. This article develops a conceptual model that supports a systematic connection between adaptive heuristics and project decisions. Individual adaptive heuristics succeed only in specific decision environments, in which...

  5. Addressing Climate Change Mitigation and Adaptation Together: A Global Assessment of Agriculture and Forestry Projects

    DEFF Research Database (Denmark)

    Kongsager, Rico; Locatelli, Bruno; Chazarin, Florie

    2016-01-01

    to greenhouse gas emissions and removals, are vulnerable to climate variations, and form part of adaptive strategies for rural livelihoods. We assessed how climate change project design documents (PDDs) considered a joint contribution to adaptation and mitigation in forestry and agriculture in the tropics...

  6. An Adaptive Approach to Managing Knowledge Development in a Project-Based Learning Environment

    Science.gov (United States)

    Tilchin, Oleg; Kittany, Mohamed

    2016-01-01

    In this paper we propose an adaptive approach to managing the development of students' knowledge in the comprehensive project-based learning (PBL) environment. Subject study is realized by two-stage PBL. It shapes adaptive knowledge management (KM) process and promotes the correct balance between personalized and collaborative learning. The…

  7. Adaptive Control and Function Projective Synchronization in 2D Discrete-Time Chaotic Systems

    International Nuclear Information System (INIS)

    Li Yin; Chen Yong; Li Biao

    2009-01-01

    This study addresses the adaptive control and function projective synchronization problems between 2D Rulkov discrete-time system and Network discrete-time system. Based on backstepping design with three controllers, a systematic, concrete and automatic scheme is developed to investigate the function projective synchronization of discrete-time chaotic systems. In addition, the adaptive control function is applied to achieve the state synchronization of two discrete-time systems. Numerical results demonstrate the effectiveness of the proposed control scheme.

  8. Disturbance observer-based adaptive sliding mode hybrid projective ...

    Indian Academy of Sciences (India)

    Ayub Khan

    2018-04-21

    Apr 21, 2018 ... systems, the effect of external disturbances, energy fluc- tuation and other such ...... When we apply the above proposed strategy to achieve hybrid projective ..... ory and intelligent control (Springer, 2016) pp. 681–. 697.

  9. Reuse inspection refort of the spent fuel cask

    Energy Technology Data Exchange (ETDEWEB)

    Park, S. W.; Seo, K. S.; Ku, J. H.; Lee, J. C.; Bang, K. S.; Min, D. K. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-04-01

    This is the contract result report performed by KAERI under the contract with KPS for the reuse inspection of the KSC-4 No. 2 cask to receive the license for the reuse of next 5 years. According to the revision of the atomic regulations, all type B package should receive and pass the reuse inspection for every 5 years. This report contains the summary of the reuse inspection project, the details of the inspection methods and evaluation criteria, the documents which submitted to the KINS and the license approved by the KINS. 1 tabs. (Author)

  10. Adaptive projection intensity adjustment for avoiding saturation in three-dimensional shape measurement

    Science.gov (United States)

    Chen, Chao; Gao, Nan; Wang, Xiangjun; Zhang, Zonghua

    2018-03-01

    Phase-based fringe projection methods have been commonly used for three-dimensional (3D) measurements. However, image saturation results in incorrect intensities in captured fringe pattern images, leading to phase and measurement errors. Existing solutions are complex. This paper proposes an adaptive projection intensity adjustment method to avoid image saturation and maintain good fringe modulation in measuring objects with a high range of surface reflectivities. The adapted fringe patterns are created using only one prior step of fringe-pattern projection and image capture. First, a set of phase-shifted fringe patterns with maximum projection intensity value of 255 and a uniform gray level pattern are projected onto the surface of an object. The patterns are reflected from and deformed by the object surface and captured by a digital camera. The best projection intensities corresponding to each saturated-pixel clusters are determined by fitting a polynomial function to transform captured intensities to projected intensities. Subsequently, the adapted fringe patterns are constructed using the best projection intensities at projector pixel coordinate. Finally, the adapted fringe patterns are projected for phase recovery and 3D shape calculation. The experimental results demonstrate that the proposed method achieves high measurement accuracy even for objects with a high range of surface reflectivities.

  11. Beneficial reuse '97

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The annual Beneficial Reuse Conference was conducted in Knoxville, Tennessee from August 5-7, 1997. Now in its fifth year, this conference has become the national forum for discussing the beneficial reuse and recycle of contaminated buildings, equipment and resources, and the fabrication of useful products from such resources. As in the past, the primary goal of Beneficial Reuse ''97 was to provide a forum for the practitioners of pollution prevention, decontamination and decommissioning, waste minimization, reindustrialization, asset management, privatization and recycling to share their successes and failures, as well as their innovative strategies and operational experiences with the assembled group of stakeholders. Separate abstracts have been indexed into the database for contributions to this conference proceedings

  12. Demons Registration of CT Volume and CBCT Projections for Adaptive Radiotherapy: Avoiding CBCT Reconstruction

    DEFF Research Database (Denmark)

    Bjerre, Troels; Aznar, M.; Munck af Rosenschöld, P.

    2012-01-01

    with adaptive fluidity (smoothing kernel width). For forward/back-projection, the separable footprints algorithm with trapezoid functions was applied. The similarity between the simulated and measured projections was measured as the SSD. Results: The figure shows a slice of; the CT volume (reference), the CT...

  13. Software Reuse Within the Earth Science Community

    Science.gov (United States)

    Marshall, James J.; Olding, Steve; Wolfe, Robert E.; Delnore, Victor E.

    2006-01-01

    Scientific missions in the Earth sciences frequently require cost-effective, highly reliable, and easy-to-use software, which can be a challenge for software developers to provide. The NASA Earth Science Enterprise (ESE) spends a significant amount of resources developing software components and other software development artifacts that may also be of value if reused in other projects requiring similar functionality. In general, software reuse is often defined as utilizing existing software artifacts. Software reuse can improve productivity and quality while decreasing the cost of software development, as documented by case studies in the literature. Since large software systems are often the results of the integration of many smaller and sometimes reusable components, ensuring reusability of such software components becomes a necessity. Indeed, designing software components with reusability as a requirement can increase the software reuse potential within a community such as the NASA ESE community. The NASA Earth Science Data Systems (ESDS) Software Reuse Working Group is chartered to oversee the development of a process that will maximize the reuse potential of existing software components while recommending strategies for maximizing the reusability potential of yet-to-be-designed components. As part of this work, two surveys of the Earth science community were conducted. The first was performed in 2004 and distributed among government employees and contractors. A follow-up survey was performed in 2005 and distributed among a wider community, to include members of industry and academia. The surveys were designed to collect information on subjects such as the current software reuse practices of Earth science software developers, why they choose to reuse software, and what perceived barriers prevent them from reusing software. In this paper, we compare the results of these surveys, summarize the observed trends, and discuss the findings. The results are very

  14. A Conceptual Framework for Adaptive Project Management in the Department of Defense

    Science.gov (United States)

    2016-04-30

    qÜáêíÉÉåíÜ=^ååì~ä= ^Åèìáëáíáçå=oÉëÉ~êÅÜ= póãéçëáìã= qÜìêëÇ~ó=pÉëëáçåë= sçäìãÉ=ff= = A Conceptual Framework for Adaptive Project Management in the Department... Conceptual Framework for Adaptive Project Management in the Department of Defense Martin Brown, Jr., Project Manager, Program Executive Office for...NPS ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ãW= `êÉ~íáåÖ=póåÉêÖó=Ñçê=fåÑçêãÉÇ=`Ü~åÖÉ= - 503 - A Conceptual Framework for Adaptive Project Management in

  15. Adaptive fringe-pattern projection for image saturation avoidance in 3D surface-shape measurement.

    Science.gov (United States)

    Li, Dong; Kofman, Jonathan

    2014-04-21

    In fringe-projection 3D surface-shape measurement, image saturation results in incorrect intensities in captured images of fringe patterns, leading to phase and measurement errors. An adaptive fringe-pattern projection (AFPP) method was developed to adapt the maximum input gray level in projected fringe patterns to the local reflectivity of an object surface being measured. The AFPP method demonstrated improved 3D measurement accuracy by avoiding image saturation in highly-reflective surface regions while maintaining high intensity modulation across the entire surface. The AFPP method can avoid image saturation and handle varying surface reflectivity, using only two prior rounds of fringe-pattern projection and image capture to generate the adapted fringe patterns.

  16. Sweep-twist adaptive rotor blade : final project report.

    Energy Technology Data Exchange (ETDEWEB)

    Ashwill, Thomas D.

    2010-02-01

    Knight & Carver was contracted by Sandia National Laboratories to develop a Sweep Twist Adaptive Rotor (STAR) blade that reduced operating loads, thereby allowing a larger, more productive rotor. The blade design used outer blade sweep to create twist coupling without angled fiber. Knight & Carver successfully designed, fabricated, tested and evaluated STAR prototype blades. Through laboratory and field tests, Knight & Carver showed the STAR blade met the engineering design criteria and economic goals for the program. A STAR prototype was successfully tested in Tehachapi during 2008 and a large data set was collected to support engineering and commercial development of the technology. This report documents the methodology used to develop the STAR blade design and reviews the approach used for laboratory and field testing. The effort demonstrated that STAR technology can provide significantly greater energy capture without higher operating loads on the turbine.

  17. Aligning the economic modeling of software reuse with reuse practices

    NARCIS (Netherlands)

    Postmus, D.; Meijler, 27696

    In contrast to current practices where software reuse is applied recursively and reusable assets are tailored trough parameterization or specialization, existing reuse economic models assume that (i) the cost of reusing a software asset depends on its size and (ii) reusable assets are developed from

  18. Reuse, Reduce, Recycle.

    Science.gov (United States)

    Briscoe, Georgia

    1991-01-01

    Discussion of recycling paper in law libraries is also applicable to other types of libraries. Results of surveys of law libraries that investigated recycling practices in 1987 and again in 1990 are reported, and suggestions for reducing the amount of paper used and reusing as much as possible are offered. (LRW)

  19. Promoter reuse in prokaryotes

    NARCIS (Netherlands)

    Nijveen, H.; Matus-Garcia, M.; Passel, van M.W.J.

    2012-01-01

    Anecdotal evidence shows promoters being reused separate from their downstream gene, thus providing a mechanism for the efficient and rapid rewiring of a gene’s transcriptional regulation. We have identified over 4000 groups of highly similar promoters using a conservative sequence similarity search

  20. 2012 Guidelines for Water Reuse

    Science.gov (United States)

    This manual is a revision of the "2004 Water Reuse Guidelines." This document is a summary of reuse guidelines, with supporting information, for the benefit of utilities of utilities and regulatory agencies, particularly EPA.

  1. Reservoir adaptive operating rules based on both of historical streamflow and future projections

    Science.gov (United States)

    Zhang, Wei; Liu, Pan; Wang, Hao; Chen, Jie; Lei, Xiaohui; Feng, Maoyuan

    2017-10-01

    Climate change is affecting hydrological variables and consequently is impacting water resources management. Historical strategies are no longer applicable under climate change. Therefore, adaptive management, especially adaptive operating rules for reservoirs, has been developed to mitigate the possible adverse effects of climate change. However, to date, adaptive operating rules are generally based on future projections involving uncertainties under climate change, yet ignoring historical information. To address this, we propose an approach for deriving adaptive operating rules considering both historical information and future projections, namely historical and future operating rules (HAFOR). A robustness index was developed by comparing benefits from HAFOR with benefits from conventional operating rules (COR). For both historical and future streamflow series, maximizations of both average benefits and the robustness index were employed as objectives, and four trade-offs were implemented to solve the multi-objective problem. Based on the integrated objective, the simulation-based optimization method was used to optimize the parameters of HAFOR. Using the Dongwushi Reservoir in China as a case study, HAFOR was demonstrated to be an effective and robust method for developing adaptive operating rules under the uncertain changing environment. Compared with historical or projected future operating rules (HOR or FPOR), HAFOR can reduce the uncertainty and increase the robustness for future projections, especially regarding results of reservoir releases and volumes. HAFOR, therefore, facilitates adaptive management in the context that climate change is difficult to predict accurately.

  2. Adaptive modified function projective synchronization of multiple time-delayed chaotic Rossler system

    International Nuclear Information System (INIS)

    Sudheer, K. Sebastian; Sabir, M.

    2011-01-01

    In this Letter we consider modified function projective synchronization of unidirectionally coupled multiple time-delayed Rossler chaotic systems using adaptive controls. Recently, delay differential equations have attracted much attention in the field of nonlinear dynamics. The high complexity of the multiple time-delayed systems can provide a new architecture for enhancing message security in chaos based encryption systems. Adaptive control can be used for synchronization when the parameters of the system are unknown. Based on Lyapunov stability theory, the adaptive control law and the parameter update law are derived to make the state of two chaotic systems are function projective synchronized. Numerical simulations are presented to demonstrate the effectiveness of the proposed adaptive controllers.

  3. Waste Not Want Not: Water Reuse and Recycling in Texas

    Science.gov (United States)

    The Texas Water Development Board has provided more than $300 million to over 28 projects using its CWSRF to fund a diversification of water reclamation, reuse and supply development solutions to augment community resiliency in the face of drought events.

  4. Adaptive pixel-to-pixel projection intensity adjustment for measuring a shiny surface using orthogonal color fringe pattern projection

    Science.gov (United States)

    Chen, Chao; Gao, Nan; Wang, Xiangjun; Zhang, Zonghua

    2018-05-01

    Three-dimensional (3D) shape measurement based on fringe pattern projection techniques has been commonly used in various fields. One of the remaining challenges in fringe pattern projection is that camera sensor saturation may occur if there is a large range of reflectivity variation across the surface that causes measurement errors. To overcome this problem, a novel fringe pattern projection method is proposed to avoid image saturation and maintain high-intensity modulation for measuring shiny surfaces by adaptively adjusting the pixel-to-pixel projection intensity according to the surface reflectivity. First, three sets of orthogonal color fringe patterns and a sequence of uniform gray-level patterns with different gray levels are projected onto a measured surface by a projector. The patterns are deformed with respect to the object surface and captured by a camera from a different viewpoint. Subsequently, the optimal projection intensity at each pixel is determined by fusing different gray levels and transforming the camera pixel coordinate system into the projector pixel coordinate system. Finally, the adapted fringe patterns are created and used for 3D shape measurement. Experimental results on a flat checkerboard and shiny objects demonstrate that the proposed method can measure shiny surfaces with high accuracy.

  5. Projective synchronization of time-varying delayed neural network with adaptive scaling factors

    International Nuclear Information System (INIS)

    Ghosh, Dibakar; Banerjee, Santo

    2013-01-01

    Highlights: • Projective synchronization in coupled delayed neural chaotic systems with modulated delay time is introduced. • An adaptive rule for the scaling factors is introduced. • This scheme is highly applicable in secure communication. -- Abstract: In this work, the projective synchronization between two continuous time delayed neural systems with time varying delay is investigated. A sufficient condition for synchronization for the coupled systems with modulated delay is presented analytically with the help of the Krasovskii–Lyapunov approach. The effect of adaptive scaling factors on synchronization are also studied in details. Numerical simulations verify the effectiveness of the analytic results

  6. Assessment of the effect of water source of health risk in a pilot project to promote the reuse of reclaimed water in cooling towers; Valoracion del efecto del origen del agua en el riesgo sanitario en una experiencia piloto para promover la reutilizacion de agua regenerada en torres de refrigeracion

    Energy Technology Data Exchange (ETDEWEB)

    Fittipaldi, M.; Codony, F.; Puigdengoles, J. M.; Molist; Morato, J.

    2009-07-01

    Wastewater regeneration and reuse of regenerated water permits to increase the amount of water and guarantees the availability required, in terms of both quantity and quality. In this context, a research project on regenerated water reuse for cooling towers has been carried out by the Universitat Politecnica de Catalunya (UPC), the Water Catalan Agency (ACA) and the Council of Chambers of Commerce. The research consisted of two steps. A first objective was to verify the effect of water source in the colonization of cooling towers by Legionella. In order to achieve those objectives, effluents from different wastewater treatment plant stages were used. The second objective was to evaluate in situ the disinfection process in order to decrease the sanitary risk from water reuse for cooling towers. For the entire duration of the project, both conventional culture methods and new molecular techniques with real times PCR were performed to detect Legionella from water samples. (Author) 17 refs.

  7. Water reuse in the kingdom of Saudi Arabia - Status, prospects and research needs

    KAUST Repository

    Drewes, Jorg; Garduñ o, C. Patricio Roa; Amy, Gary L.

    2012-01-01

    Saudi Arabia is one of the driest countries in the world. While desalination plants currently installed in the country represent 30% of the world's desalination capacity, seawater desalination alone will not be able to provide sufficient supplies to meet the increasing freshwater demand. However, with only 9% of the total municipal wastewater generated currently being reused, the kingdom is projected as the third largest reuse market after China and the USA, and reuse capacities are projected to increase by 800% by 2016. This projected growth and the change in water portfolios offer tremendous opportunities to integrate novel approaches of water reclamation and reuse. This paper highlights the current status of reuse in the kingdom, discusses prospects of using distributed infrastructure for reuse tailored to local needs as well as the use of artificial recharge and recovery systems for reclaimed water. It also suggests research needs to helping overcoming barriers for wastewater reuse. Copyright © IWA Publishing 2012.

  8. Water reuse in the kingdom of Saudi Arabia - Status, prospects and research needs

    KAUST Repository

    Drewes, Jorg

    2012-10-01

    Saudi Arabia is one of the driest countries in the world. While desalination plants currently installed in the country represent 30% of the world\\'s desalination capacity, seawater desalination alone will not be able to provide sufficient supplies to meet the increasing freshwater demand. However, with only 9% of the total municipal wastewater generated currently being reused, the kingdom is projected as the third largest reuse market after China and the USA, and reuse capacities are projected to increase by 800% by 2016. This projected growth and the change in water portfolios offer tremendous opportunities to integrate novel approaches of water reclamation and reuse. This paper highlights the current status of reuse in the kingdom, discusses prospects of using distributed infrastructure for reuse tailored to local needs as well as the use of artificial recharge and recovery systems for reclaimed water. It also suggests research needs to helping overcoming barriers for wastewater reuse. Copyright © IWA Publishing 2012.

  9. Adaptive function project synchronization of Roessler hyperchaotic system with uncertain parameters

    International Nuclear Information System (INIS)

    Luo Runzi

    2008-01-01

    This Letter addresses the function project synchronization problem of two Roessler hyperchaotic in the presence of unknown system parameters. Based on Lyapunov stability theory an adaptive control law is proposed to make the states of two identical Roessler hyperchaotic systems asymptotically synchronized. Numerical simulations are presented to show the effectiveness of the proposed schemes

  10. Adaptive modified projective synchronization of a unified chaotic system with an uncertain parameter

    International Nuclear Information System (INIS)

    Park, Ju H.

    2007-01-01

    An adaptive modified projective synchronization (AMPS) is proposed to acquire a general kind of proportional relationship between the drive and response systems. Based on the Lyapunov stability theory, a nonlinear control scheme for the synchronization has been presented. The control performances are verified by numerical simulations

  11. Projectables

    DEFF Research Database (Denmark)

    Rasmussen, Troels A.; Merritt, Timothy R.

    2017-01-01

    CNC cutting machines have become essential tools for designers and architects enabling rapid prototyping, model-building and production of high quality components. Designers often cut from new materials, discarding the irregularly shaped remains. We introduce ProjecTables, a visual augmented...... reality system for interactive packing of model parts onto sheet materials. ProjecTables enables designers to (re)use scrap materials for CNC cutting that would have been previously thrown away, at the same time supporting aesthetic choices related to wood grain, avoiding surface blemishes, and other...... relevant material properties. We conducted evaluations of ProjecTables with design students from Aarhus School of Architecture, demonstrating that participants could quickly and easily place and orient model parts reducing material waste. Contextual interviews and ideation sessions led to a deeper...

  12. "Intelligent Ensemble" Projections of Precipitation and Surface Radiation in Support of Agricultural Climate Change Adaptation

    Science.gov (United States)

    Taylor, Patrick C.; Baker, Noel C.

    2015-01-01

    Earth's climate is changing and will continue to change into the foreseeable future. Expected changes in the climatological distribution of precipitation, surface temperature, and surface solar radiation will significantly impact agriculture. Adaptation strategies are, therefore, required to reduce the agricultural impacts of climate change. Climate change projections of precipitation, surface temperature, and surface solar radiation distributions are necessary input for adaption planning studies. These projections are conventionally constructed from an ensemble of climate model simulations (e.g., the Coupled Model Intercomparison Project 5 (CMIP5)) as an equal weighted average, one model one vote. Each climate model, however, represents the array of climate-relevant physical processes with varying degrees of fidelity influencing the projection of individual climate variables differently. Presented here is a new approach, termed the "Intelligent Ensemble, that constructs climate variable projections by weighting each model according to its ability to represent key physical processes, e.g., precipitation probability distribution. This approach provides added value over the equal weighted average method. Physical process metrics applied in the "Intelligent Ensemble" method are created using a combination of NASA and NOAA satellite and surface-based cloud, radiation, temperature, and precipitation data sets. The "Intelligent Ensemble" method is applied to the RCP4.5 and RCP8.5 anthropogenic climate forcing simulations within the CMIP5 archive to develop a set of climate change scenarios for precipitation, temperature, and surface solar radiation in each USDA Farm Resource Region for use in climate change adaptation studies.

  13. Adaptive digital fringe projection technique for high dynamic range three-dimensional shape measurement.

    Science.gov (United States)

    Lin, Hui; Gao, Jian; Mei, Qing; He, Yunbo; Liu, Junxiu; Wang, Xingjin

    2016-04-04

    It is a challenge for any optical method to measure objects with a large range of reflectivity variation across the surface. Image saturation results in incorrect intensities in captured fringe pattern images, leading to phase and measurement errors. This paper presents a new adaptive digital fringe projection technique which avoids image saturation and has a high signal to noise ratio (SNR) in the three-dimensional (3-D) shape measurement of objects that has a large range of reflectivity variation across the surface. Compared to previous high dynamic range 3-D scan methods using many exposures and fringe pattern projections, which consumes a lot of time, the proposed technique uses only two preliminary steps of fringe pattern projection and image capture to generate the adapted fringe patterns, by adaptively adjusting the pixel-wise intensity of the projected fringe patterns based on the saturated pixels in the captured images of the surface being measured. For the bright regions due to high surface reflectivity and high illumination by the ambient light and surfaces interreflections, the projected intensity is reduced just to be low enough to avoid image saturation. Simultaneously, the maximum intensity of 255 is used for those dark regions with low surface reflectivity to maintain high SNR. Our experiments demonstrate that the proposed technique can achieve higher 3-D measurement accuracy across a surface with a large range of reflectivity variation.

  14. Prototype water reuse system

    Science.gov (United States)

    Lucchetti, G.; Gray, G.A.

    1988-01-01

    A small-scale water reuse system (150 L/min) was developed to create an environment for observing fish under a variety of temperature regimes. Key concerns of disease control, water quality, temperature control, and efficiency and case of operation were addressed. Northern squawfish (Ptychocheilus oregonensis) were held at loading densities ranging from 0.11 to 0.97 kg/L per minute and at temperatures from 10 to 20°C for 6 months with no disease problems or degradation ofwater quality in the system. The system required little maintenance during 2 years of operation.

  15. Bayesian policy reuse

    CSIR Research Space (South Africa)

    Rosman, Benjamin

    2016-02-01

    Full Text Available Keywords Policy Reuse · Reinforcement Learning · Online Learning · Online Bandits · Transfer Learning · Bayesian Optimisation · Bayesian Decision Theory. 1 Introduction As robots and software agents are becoming more ubiquitous in many applications.... The agent has access to a library of policies (pi1, pi2 and pi3), and has previously experienced a set of task instances (τ1, τ2, τ3, τ4), as well as samples of the utilities of the library policies on these instances (the black dots indicate the means...

  16. Heterogeneous IP Ecosystem enabling Reuse (HIER)

    Science.gov (United States)

    2017-03-22

    HIER project, DARPA also established additional concepts in the formation of the Common Heterogeneous Integration and IP Reuse Strategies (CHIPS...would need a major change to  business model to offer  Hard  or Soft IP – So CHIPS program can be a better fit to these firms • DoD‐Contractor IP pricing

  17. Preserving and reusing high-energy-physics data analyses

    CERN Document Server

    Simko, Tibor; Dasler, Robin; Fokianos, Pamfilos; Kuncar, Jiri; Lavasa, Artemis; Mattmann, Annemarie; Rodriguez, Diego; Trzcinska, Anna; Tsanaktsidis, Ioannis

    2017-01-01

    The revalidation, reuse and reinterpretation of data analyses require having access to the original virtual environments, datasets and software that was used to produce the original scientific result. The CERN Analysis Preservation pilot project is developing a set of tools that support particle physics researchers in preserving the knowledge around analyses so that capturing, sharing, reusing and reinterpreting data becomes easier. In this talk, we shall notably focus on the aspects of reusing a preserved analysis. We describe a system that permits to instantiate the preserved analysis workflow on the computing cloud, paving the way to allowing researchers to revalidate and reinterpret research data even many years after the original publication.

  18. Evolution of spatio-temporal drought characteristics: validation, projections and effect of adaptation scenarios

    Science.gov (United States)

    Vidal, J.-P.; Martin, E.; Kitova, N.; Najac, J.; Soubeyroux, J.-M.

    2012-08-01

    Drought events develop in both space and time and they are therefore best described through summary joint spatio-temporal characteristics, such as mean duration, mean affected area and total magnitude. This paper addresses the issue of future projections of such characteristics of drought events over France through three main research questions: (1) Are downscaled climate projections able to simulate spatio-temporal characteristics of meteorological and agricultural droughts in France over a present-day period? (2) How such characteristics will evolve over the 21st century? (3) How to use standardized drought indices to represent theoretical adaptation scenarios? These questions are addressed using the Isba land surface model, downscaled climate projections from the ARPEGE General Circulation Model under three emissions scenarios, as well as results from a previously performed 50-yr multilevel and multiscale drought reanalysis over France. Spatio-temporal characteristics of meteorological and agricultural drought events are computed using the Standardized Precipitation Index and the Standardized Soil Wetness Index, respectively, and for time scales of 3 and 12 months. Results first show that the distributions of joint spatio-temporal characteristics of observed events are well simulated by the downscaled hydroclimate projections over a present-day period. All spatio-temporal characteristics of drought events are then found to dramatically increase over the 21st century, with stronger changes for agricultural droughts. Two theoretical adaptation scenarios are eventually built based on hypotheses of adaptation to evolving climate and hydrological normals, either retrospective or prospective. The perceived spatio-temporal characteristics of drought events derived from these theoretical adaptation scenarios show much reduced changes, but they call for more realistic scenarios at both the catchment and national scale in order to accurately assess the combined effect of

  19. An Adaptive Large Neighborhood Search Algorithm for the Resource-constrained Project Scheduling Problem

    DEFF Research Database (Denmark)

    Muller, Laurent Flindt

    2009-01-01

    We present an application of an Adaptive Large Neighborhood Search (ALNS) algorithm to the Resource-constrained Project Scheduling Problem (RCPSP). The ALNS framework was first proposed by Pisinger and Røpke [19] and can be described as a large neighborhood search algorithm with an adaptive layer......, where a set of destroy/repair neighborhoods compete to modify the current solution in each iteration of the algorithm. Experiments are performed on the wellknown J30, J60 and J120 benchmark instances, which show that the proposed algorithm is competitive and confirms the strength of the ALNS framework...

  20. Supporting UK adaptation: building services for the next set of UK climate projections

    Science.gov (United States)

    Fung, Fai; Lowe, Jason

    2016-04-01

    As part of the Climate Change Act 2008, the UK Government sets out a national adaptation programme to address the risks and opportunities identified in a national climate change risk assessment (CCRA) every five years. The last risk assessment in 2012 was based on the probabilistic projections for the UK published in 2009 (UKCP09). The second risk assessment will also use information from UKCP09 alongside other evidence on climate projections. However, developments in the science of climate projeciton, and evolving user needs (based partly on what has been learnt about the diverse user requirements of the UK adaptation community from the seven years of delivering and managing UKCP09 products, market research and the peer-reviewed literature) suggest now is an appropriate time to update the projections and how they are delivered. A new set of UK climate projections are now being produced to upgrade UKCP09 to reflect the latest developments in climate science, the first phase of which will be delivered in 2018 to support the third CCRA. A major component of the work is the building of a tailored service to support users of the new projections during their development and to involve users in key decisions so that the projections are of most use. We will set out the plan for the new climate projections that seek to address the evolving user need. We will also present a framework which aims to (i) facilitate the dialogue between users, boundary organisations and producers, reflecting their different decision-making roles (ii) produce scientifically robust, user-relevant climate information (iii) provide the building blocks for developing further climate services to support adaptation activities in the UK.

  1. Water reuse systems: A review of the principal components

    Science.gov (United States)

    Lucchetti, G.; Gray, G.A.

    1988-01-01

    Principal components of water reuse systems include ammonia removal, disease control, temperature control, aeration, and particulate filtration. Effective ammonia removal techniques include air stripping, ion exchange, and biofiltration. Selection of a particular technique largely depends on site-specific requirements (e.g., space, existing water quality, and fish densities). Disease control, although often overlooked, is a major problem in reuse systems. Pathogens can be controlled most effectively with ultraviolet radiation, ozone, or chlorine. Simple and inexpensive methods are available to increase oxygen concentration and eliminate gas supersaturation, these include commercial aerators, air injectors, and packed columns. Temperature control is a major advantage of reuse systems, but the equipment required can be expensive, particularly if water temperature must be rigidly controlled and ambient air temperature fluctuates. Filtration can be readily accomplished with a hydrocyclone or sand filter that increases overall system efficiency. Based on criteria of adaptability, efficiency, and reasonable cost, we recommend components for a small water reuse system.

  2. Structuring Formal Requirements Specifications for Reuse and Product Families

    Science.gov (United States)

    Heimdahl, Mats P. E.

    2001-01-01

    In this project we have investigated how formal specifications should be structured to allow for requirements reuse, product family engineering, and ease of requirements change, The contributions of this work include (1) a requirements specification methodology specifically targeted for critical avionics applications, (2) guidelines for how to structure state-based specifications to facilitate ease of change and reuse, and (3) examples from the avionics domain demonstrating the proposed approach.

  3. Performing Verification and Validation in Reuse-Based Software Engineering

    Science.gov (United States)

    Addy, Edward A.

    1999-01-01

    The implementation of reuse-based software engineering not only introduces new activities to the software development process, such as domain analysis and domain modeling, it also impacts other aspects of software engineering. Other areas of software engineering that are affected include Configuration Management, Testing, Quality Control, and Verification and Validation (V&V). Activities in each of these areas must be adapted to address the entire domain or product line rather than a specific application system. This paper discusses changes and enhancements to the V&V process, in order to adapt V&V to reuse-based software engineering.

  4. Cultural differences and process adaptation in international R&D project management

    DEFF Research Database (Denmark)

    Li, Xing; Li, J. Z.

    2009-01-01

    In the era of globalization, Western companies have started to explore China as a source of technology. Yet, Western R&D project management processes in China are frequently facing many problems. Some of the problems can be conceptualized by analyzing a number of known cultural contrasts between ...... project success. At the same time, lessons and recommendations on the adaptability to Chinese style business and management interactions will be drawn from the case study for international companies that locate R&D projects in China.......In the era of globalization, Western companies have started to explore China as a source of technology. Yet, Western R&D project management processes in China are frequently facing many problems. Some of the problems can be conceptualized by analyzing a number of known cultural contrasts between...

  5. [Exercise-referral to a specialist in adapted physical activity (APA) : a pilot project].

    Science.gov (United States)

    Brugnerotto, Adeline; Cardinaux, Regula; Ueltschi, Yan; Bauwens, Marine; Nanchen, David; Cornuz, Jacques; Bize, Raphaël; Auer, Reto

    2016-11-02

    Family physicians have a key role in the promotion of physical activity, in particular in identifying and counseling persons who have a sedentary lifestyle. Some patients could benefit from intensive individual counseling. Physicians are often not aware of all physical activity promotion activities in the community that they could recommend their patients. In a pilot study, we have tested and adapted the referral of patients from family physicians to specialists in adapted physical activity (APAs). APAs are trained to assess and guide persons towards physical activities adapted to their needs and pathologies and thus towards an increase in physical activity. Pilot data suggest that, while few patients were oriented to the APAs in the pilot project, family physicians appreciate the possibility of collaborating with the APAs.

  6. Adaptive controller design for modified projective synchronization of Genesio-Tesi chaotic system with uncertain parameters

    International Nuclear Information System (INIS)

    Park, Ju H.

    2007-01-01

    The paper addresses control problem for the modified projective synchronization of the Genesio-Tesi chaotic systems with three uncertain parameters. An adaptive control law is derived to make the states of two identical Genesio-Tesi systems asymptotically synchronized up to specific ratios. The stability analysis in the paper is proved using a well-known Lyapunov stability theory. A numerical simulation is presented to show the effectiveness of the proposed chaos synchronization scheme

  7. Sparse Pseudo Spectral Projection Methods with Directional Adaptation for Uncertainty Quantification

    KAUST Repository

    Winokur, J.

    2015-12-19

    We investigate two methods to build a polynomial approximation of a model output depending on some parameters. The two approaches are based on pseudo-spectral projection (PSP) methods on adaptively constructed sparse grids, and aim at providing a finer control of the resolution along two distinct subsets of model parameters. The control of the error along different subsets of parameters may be needed for instance in the case of a model depending on uncertain parameters and deterministic design variables. We first consider a nested approach where an independent adaptive sparse grid PSP is performed along the first set of directions only, and at each point a sparse grid is constructed adaptively in the second set of directions. We then consider the application of aPSP in the space of all parameters, and introduce directional refinement criteria to provide a tighter control of the projection error along individual dimensions. Specifically, we use a Sobol decomposition of the projection surpluses to tune the sparse grid adaptation. The behavior and performance of the two approaches are compared for a simple two-dimensional test problem and for a shock-tube ignition model involving 22 uncertain parameters and 3 design parameters. The numerical experiments indicate that whereas both methods provide effective means for tuning the quality of the representation along distinct subsets of parameters, PSP in the global parameter space generally requires fewer model evaluations than the nested approach to achieve similar projection error. In addition, the global approach is better suited for generalization to more than two subsets of directions.

  8. Environmental benefits from reusing clothes

    DEFF Research Database (Denmark)

    Farrant, Laura; Olsen, Stig Irving; Wangel, Arne

    2010-01-01

    and Estonia, it was assumed that over 100 collected items 60 would be reused, 30 recycled in other ways and 10 go to final disposal Using these inputs, the LCA showed that the collection, processing and transport of second-hand clothing has insignificant impacts on the environment in comparison to the savings...... of establishing the net benefits from introducing clothes reuse. Indeed, it enables to take into consideration all the activities connected to reusing clothes, including, for instance, recycling and disposal of the collected clothes not suitable for reuse. In addition, the routes followed by the collected clothes....... Conclusions The results of the study show that clothes reuse can significantly contribute to reducing the environmental burden of clothing. Recommendations and perspectives It would be beneficial to apply other methods for estimating the avoided production of new clothes in order to check the validity...

  9. Adaptive generalized function projective lag synchronization of different chaotic systems with fully uncertain parameters

    International Nuclear Information System (INIS)

    Wu Xiangjun; Lu Hongtao

    2011-01-01

    Highlights: → Adaptive generalized function projective lag synchronization (AGFPLS) is proposed. → Two uncertain chaos systems are lag synchronized up to a scaling function matrix. → The synchronization speed is sensitively influenced by the control gains. → The AGFPLS scheme is robust against noise perturbation. - Abstract: In this paper, a novel projective synchronization scheme called adaptive generalized function projective lag synchronization (AGFPLS) is proposed. In the AGFPLS method, the states of two different chaotic systems with fully uncertain parameters are asymptotically lag synchronized up to a desired scaling function matrix. By means of the Lyapunov stability theory, an adaptive controller with corresponding parameter update rule is designed for achieving AGFPLS between two diverse chaotic systems and estimating the unknown parameters. This technique is employed to realize AGFPLS between uncertain Lue chaotic system and uncertain Liu chaotic system, and between Chen hyperchaotic system and Lorenz hyperchaotic system with fully uncertain parameters, respectively. Furthermore, AGFPLS between two different uncertain chaotic systems can still be achieved effectively with the existence of noise perturbation. The corresponding numerical simulations are performed to demonstrate the validity and robustness of the presented synchronization method.

  10. Development of Policies, Institutions and Procedures for Water Reuse

    Science.gov (United States)

    Demouche, L.; Pfiefer, J.; Hanson, A.; Skaggs, R.

    2009-12-01

    In the arid, water scarce region of New Mexico and West Texas there is growing interest in the potential for water reuse to extend existing supplies and mitigate drought shortage impacts. There are no new sources of water in New Mexico, except reclaimed water. Communities and individuals are uncertain about and have many unanswered questions about polices, institutions involved (agencies), legal and regulatory requirements, and procedures governing water reuse. Issues to be addressed by this project include: the legal ability to reuse water, ownership of water rights, downstream or third party impacts, regulatory and procedural requirements, water quality concerns, state and local agency involvement, and cost effectiveness of water reuse compared to alternative sources. Presently, there is very little implementation or directives in New Mexico policy that addresses reuse, reclamation, or recycled water. The only regulations pertaining to reuse is New Mexico Environmental Department currently allows the use of reclaimed domestic wastewater for irrigation of golf courses and green spaces, which is listed in the Policy for the Above Ground Use of Reclaimed Domestic Wastewater (NMED, 2003). This document identifies the various reclaimed quality classifications that are required for specific applications and the permits required for application. This document does not identify or address policy applications on the distribution, ownership, or trading of reclaimed water. Even though reclaimed water reuse projects are currently being implemented in many cities in the U.S., mainly for commercial and municipal irrigation (golf courses and green space), its potential has not yet been exploited. A policy analysis matrix (PAM) is being designed to identify and examine the policy framework and consequences of non-policy implementation for decision makers and interest groups and assist them in understanding the consequences of policy actions and project outcomes if no laws or

  11. Design a Solid Waste Management Course for Primary School focus on Reduce-Reuse-Recycle : Project: WastED – Export of Education, Waste Management - Target market: Vietnam

    OpenAIRE

    Pham, Linh

    2014-01-01

    This product-oriented Bachelor’s thesis looks at waste-management education in primary schools. The primary objective of the study was to design a basic wastemanagement course, concisely packed in a booklet, ready-to-use for teachers and trainers. The outcome of the thesis, the booklet (content of the course) is expected to be used as one of the materials for the WastED project – Export of Education in Waste Management. The study is made up of theory sections and a product design se...

  12. Adaptive neuro-fuzzy optimization of wind farm project net profit

    International Nuclear Information System (INIS)

    Shamshirband, Shahaboddin; Petković, Dalibor; Ćojbašić, Žarko; Nikolić, Vlastimir; Anuar, Nor Badrul; Mohd Shuib, Nor Liyana; Mat Kiah, Miss Laiha; Akib, Shatirah

    2014-01-01

    Highlights: • Analyzing of wind farm project investment. • Net present value (NPV) maximization of the wind farm project. • Adaptive neuro-fuzzy (ANFIS) optimization of the number of wind turbines to maximize NPV. • The impact of the variation in the wind farm parameters. • Adaptive neuro fuzzy application. - Abstract: A wind power plant which consists of a group of wind turbines at a specific location is also known as wind farm. To maximize the wind farm net profit, the number of turbines installed in the wind farm should be different in depend on wind farm project investment parameters. In this paper, in order to achieve the maximal net profit of a wind farm, an intelligent optimization scheme based on the adaptive neuro-fuzzy inference system (ANFIS) is applied. As the net profit measures, net present value (NPV) and interest rate of return (IRR) are used. The NPV and IRR are two of the most important criteria for project investment estimating. The general approach in determining the accept/reject/stay in different decision for a project via NPV and IRR is to treat the cash flows as known with certainty. However, even small deviations from the predetermined values may easily invalidate the decision. In the proposed model the ANFIS estimator adjusts the number of turbines installed in the wind farm, for operating at the highest net profit point. The performance of proposed optimizer is confirmed by simulation results. Some outstanding properties of this new estimator are online implementation capability, structural simplicity and its robustness against any changes in wind farm parameters. Based on the simulation results, the effectiveness of the proposed optimization strategy is verified

  13. Development of adaptive technologies in the project biogas support for Tanzania 'BiogaST'

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Philipp; Krause, Ariane [Engineers Without Boarders (Germany), Berlin (DE). MAVUNO Project (Tanzania)

    2011-07-01

    BiogaSTs goal lies in improving the rural populations living circumstances and in strengthening the economic growth of the Kagera Region in Tanzania by providing long term assistance for self-empowerment. This is to be reached by the construction of a decentralized energy supply through small, adapted biogas digesters for the use of fermentation gas as cooking energy and for further energetic applications. The sustainability of the project is ensured by accompanying training and education this environmentally friendly technology. The existing natural resources shall be used efficiently with the anaerobic fermentation of crop residues. Against the backdrop of climate protection, the project will help reduce greenhouse gas emissions while also working against the proceeding deforestation in the region. It is being implemented as a cooperation between the registered association Engineers Without Borders Germany (EWB) and the Tanzanian non-governmental organization MAVUNO Project. (orig.)

  14. Relevance and Benefits of Urban Water Reuse in Tourist Areas

    Directory of Open Access Journals (Sweden)

    Gaston Tong Sang

    2012-01-01

    Full Text Available Urban water reuse is one of the most rapidly growing water reuse applications worldwide and one of the major elements of the sustainable management of urban water cycle. Because of the high probability of direct contact between consumers and recycled water, many technical and regulatory challenges have to be overcome in order to minimize health risks at affordable cost. This paper illustrates the keys to success of one of the first urban water reuse projects in the island Bora Bora, French Polynesia. Special emphasis is given on the reliability of operation of the membrane tertiary treatment, economic viability in terms of pricing of recycled water and operating costs, as well as on the benefits of water reuse for the sustainable development of tourist areas.

  15. Challenges in reusing transactional data for daily documentation in neonatal intensive care.

    Science.gov (United States)

    Kim, G R; Lawson, E E; Lehmann, C U

    2008-11-06

    The reuse of transactional data for clinical documentation requires navigation of computational, institutional and adaptive barriers. We describe organizational and technical issues in developing and deploying a daily progress note tool in a tertiary neonatal intensive care unit that reuses and aggregates data from a commercial integrated clinical information system.

  16. Projection-Based Adaptive Backstepping Control of a Transport Aircraft for Heavyweight Airdrop

    Directory of Open Access Journals (Sweden)

    Ri Liu

    2015-01-01

    Full Text Available An autopilot inner loop that combines backstepping control with adaptive function approximation is developed for airdrop operations. The complex nonlinear uncertainty of the aircraft-cargo model is factorized into a known matrix and an uncertainty function, and a projection-based adaptive approach is proposed to estimate this function. Using projection in the adaptation law bounds the estimated function and guarantees the robustness of the controller against time-varying external disturbances and uncertainties. The convergence properties and robustness of the control method are proved via Lyapunov theory. Simulations are conducted under the condition that one transport aircraft performs a maximum load airdrop task at a height of 82 ft, using single row single platform mode. The results show good performance and robust operation of the controller, and the airdrop mission performance indexes are satisfied, even in the presence of ±15% uncertainty in the aerodynamic coefficients, ±0.01 rad/s pitch rate disturbance, and 20% actuators faults.

  17. Adaptation.

    Science.gov (United States)

    Broom, Donald M

    2006-01-01

    The term adaptation is used in biology in three different ways. It may refer to changes which occur at the cell and organ level, or at the individual level, or at the level of gene action and evolutionary processes. Adaptation by cells, especially nerve cells helps in: communication within the body, the distinguishing of stimuli, the avoidance of overload and the conservation of energy. The time course and complexity of these mechanisms varies. Adaptive characters of organisms, including adaptive behaviours, increase fitness so this adaptation is evolutionary. The major part of this paper concerns adaptation by individuals and its relationships to welfare. In complex animals, feed forward control is widely used. Individuals predict problems and adapt by acting before the environmental effect is substantial. Much of adaptation involves brain control and animals have a set of needs, located in the brain and acting largely via motivational mechanisms, to regulate life. Needs may be for resources but are also for actions and stimuli which are part of the mechanism which has evolved to obtain the resources. Hence pigs do not just need food but need to be able to carry out actions like rooting in earth or manipulating materials which are part of foraging behaviour. The welfare of an individual is its state as regards its attempts to cope with its environment. This state includes various adaptive mechanisms including feelings and those which cope with disease. The part of welfare which is concerned with coping with pathology is health. Disease, which implies some significant effect of pathology, always results in poor welfare. Welfare varies over a range from very good, when adaptation is effective and there are feelings of pleasure or contentment, to very poor. A key point concerning the concept of individual adaptation in relation to welfare is that welfare may be good or poor while adaptation is occurring. Some adaptation is very easy and energetically cheap and

  18. Tailoring the visual communication of climate projections for local adaptation practitioners in Germany and the UK.

    Science.gov (United States)

    Lorenz, Susanne; Dessai, Suraje; Forster, Piers M; Paavola, Jouni

    2015-11-28

    Visualizations are widely used in the communication of climate projections. However, their effectiveness has rarely been assessed among their target audience. Given recent calls to increase the usability of climate information through the tailoring of climate projections, it is imperative to assess the effectiveness of different visualizations. This paper explores the complexities of tailoring through an online survey conducted with 162 local adaptation practitioners in Germany and the UK. The survey examined respondents' assessed and perceived comprehension (PC) of visual representations of climate projections as well as preferences for using different visualizations in communicating and planning for a changing climate. Comprehension and use are tested using four different graph formats, which are split into two pairs. Within each pair the information content is the same but is visualized differently. We show that even within a fairly homogeneous user group, such as local adaptation practitioners, there are clear differences in respondents' comprehension of and preference for visualizations. We do not find a consistent association between assessed comprehension and PC or use within the two pairs of visualizations that we analysed. There is, however, a clear link between PC and use of graph format. This suggests that respondents use what they think they understand the best, rather than what they actually understand the best. These findings highlight that audience-specific targeted communication may be more complex and challenging than previously recognized. © 2015 The Authors.

  19. A projection-adapted cross entropy (PACE) method for transmission network planning

    Energy Technology Data Exchange (ETDEWEB)

    Eshragh, Ali; Filar, Jerzy [University of South Australia, School of Mathematics and Statistics, Mawson Lakes, SA (Australia); Nazar, Asef [University of South Australia, Institute for Sustainable Systems Technologies, School of Mathematics and Statistics, Mawson Lakes, SA (Australia)

    2011-06-15

    In this paper, we propose an adaptation of the cross entropy (CE) method called projection-adapted CE (PACE) to solve a transmission expansion problem that arises in management of national and provincial electricity grids. The aim of the problem is to find an expansion policy that is both economical and operational from the technical perspective. Often, the transmission network expansion problem is mathematically formulated as a mixed integer nonlinear program that is very challenging algorithmically. The challenge originates from the fact that a global optimum should be found despite the presence, of possibly a huge number, of local optima. The PACE method shows promise in solving global optimization problems regardless of continuity or other assumptions. In our approach, we sample the integer variables using the CE mechanism, and solve LPs to obtain matching continuous variables. Numerical results, on selected test systems, demonstrate the potential of this approach. (orig.)

  20. Quality assurance plan for the Objective Supply Capability Adaptive Redesign (OSCAR) project

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, K.A.; Rasch, K.A.; Reid, R.W.

    1996-11-01

    This document establishes the Quality Assurance Plan (QAP) for the National Guard Bureau Objective Supply Capability Adaptive Redesign (OSCAR) project activities under the Oak Ridge National Laboratory (ORNL) management. It defines the requirements and assigns responsibilities for ensuring, with a high degree of confidence, that project objectives will be achieved as planned. The QAP outlined herein is responsive to and meets the Quality Assurance Program standards for the U.S. Department of Energy (DOE), Lockheed Martin Energy Research Corporation and ORNL and the ORNL Computing, Robotics, and Education Directorate (CRE). This document is intended to be in compliance with DOE Order 5700.6C, Quality Assurance Program, and the ORNL Standard Practice Procedure, SPP X-QA-8, Quality Assurance for ORNL Computing Software. This standard allows individual organizations to apply the stated requirements in a flexible manner suitable to the type of activity involved. Section I of this document provides an introduction to the OSCAR project QAP; Sections 2 and 3 describe the specific aspects of quality assurance as applicable to the OSCAR project. Section 4 describes the project approach to risk management. The Risk Management Matrix given in Appendix A is a tool to assess, prioritize, and prevent problems before they occur. Therefore, the matrix will be reviewed and revised on a periodic basis.

  1. Climate Analogues for agricultural impact projection and adaptation – a reliability test

    Directory of Open Access Journals (Sweden)

    Swen P.M. Bos

    2015-10-01

    Full Text Available The climate analogue approach is often considered a valuable tool for climate change impact projection and adaptation planning, especially for complex systems that cannot be modelled reliably. Important examples are smallholder farming systems using agroforestry or other mixed-cropping approaches. For the projected climate at a particular site of interest, the analogue approach identifies locations where the current climate is similar to these projected conditions. By comparing baseline-analogue site pairs, information on climate impacts and opportunities for adaptation can be obtained. However, the climate analogue approach is only meaningful, if climate is a dominant driver of differences between baseline and analogue site pairs. For a smallholder farming setting on Mt. Elgon in Kenya, we tested this requirement by comparing yield potentials of maize and coffee (obtained from the IIASA Global Agro-ecological Zones dataset among 50 close analogue sites for different future climate scenarios and models, and by comparing local ecological knowledge and farm characteristics for one baseline-analogue pair.Yield potentials among the 50 closest analogue locations varied strongly within all climate scenarios, hinting at factors other than climate as major drivers of what the analogue approach might interpret as climate effects. However, on average future climatic conditions seemed more favourable to maize and coffee cultivation than current conditions. The detailed site comparison revealed substantial differences between farms in important characteristics, such as farm size and presence of cash crops, casting doubt on the usefulness of the comparison for climate change analysis. Climatic constraints were similar between sites, so that no apparent lessons for adaptation could be derived. Pests and diseases were also similar, indicating that climate change may not lead to strong changes in biotic constraints at the baseline site in the near future. From

  2. Adaptation

    International Development Research Centre (IDRC) Digital Library (Canada)

    building skills, knowledge or networks on adaptation, ... the African partners leading the AfricaAdapt network, together with the UK-based Institute of Development Studies; and ... UNCCD Secretariat, Regional Coordination Unit for Africa, Tunis, Tunisia .... 26 Rural–urban Cooperation on Water Management in the Context of.

  3. Features of adaptation of first-year students who participated in the project «Proryv»

    Directory of Open Access Journals (Sweden)

    Grishina A.V.

    2016-10-01

    Full Text Available this article deals with the problem of adaptation of students to the university. Particular attention is drawn to the results of a pilot study to identify important psychological qualities of the person of the student who contributed to the effective adaptation of students in the framework of participation in All-Russian innovation project «Breakthrough».

  4. Parameters identification and adaptive full state hybrid projective synchronization of chaotic (hyper-chaotic) systems

    International Nuclear Information System (INIS)

    Hu Manfeng; Xu Zhenyuan; Zhang Rong; Hu Aihua

    2007-01-01

    Based on the active control idea and the invariance principle of differential equations, a general scheme of adaptive full state hybrid projective synchronization (FSHPS) and parameters identification of a class of chaotic (hyper-chaotic) systems with linearly dependent uncertain parameters is proposed in this Letter. With this effective scheme parameters identification and FSHPS of chaotic and hyper-chaotic systems can be realized simultaneously. Numerical simulations on the chaotic Chen system and the hyper-chaotic Chen system are presented to verify the effectiveness of the proposed scheme

  5. On adaptive modified projective synchronization of a supply chain management system

    Science.gov (United States)

    Tirandaz, Hamed

    2017-12-01

    In this paper, the synchronization problem of a chaotic supply chain management system is studied. A novel adaptive modified projective synchronization method is introduced to control the behaviour of the leader supply chain system by a follower chaotic system and to adjust the leader system parameters until the measurable errors of the system parameters converge to zero. The stability evaluation and convergence analysis are carried out by the Lyapanov stability theorem. The proposed synchronization and antisynchronization techniques are studied for identical supply chain chaotic systems. Finally, some numerical simulations are presented to verify the effectiveness of the theoretical discussions.

  6. Adaptive full state hybrid projective synchronization of chaotic systems with the same and different order

    International Nuclear Information System (INIS)

    Hu Manfeng; Xu Zhenyuan; Zhang Rong; Hu Aihua

    2007-01-01

    This Letter further investigates the full state hybrid projective synchronization (FSHPS) of chaotic and hyper-chaotic systems with fully unknown parameters. Based on the Lyapunov stability theory, a unified adaptive controller and parameters update law can be designed for achieving the FSHPS of chaotic and/or hyper-chaotic systems with the same and different order. Especially, for two chaotic systems with different order, reduced order MFSHPS (an acronym for modified full state hybrid projective synchronization) and increased order MFSHPS are first studied in this Letter. Five groups numerical simulations are provided to verify the effectiveness of the proposed scheme. In addition, the proposed FSHPS scheme is quite robust against the effect of noise

  7. Sparse Adaptive Channel Estimation Based on lp-Norm-Penalized Affine Projection Algorithm

    Directory of Open Access Journals (Sweden)

    Yingsong Li

    2014-01-01

    Full Text Available We propose an lp-norm-penalized affine projection algorithm (LP-APA for broadband multipath adaptive channel estimations. The proposed LP-APA is realized by incorporating an lp-norm into the cost function of the conventional affine projection algorithm (APA to exploit the sparsity property of the broadband wireless multipath channel, by which the convergence speed and steady-state performance of the APA are significantly improved. The implementation of the LP-APA is equivalent to adding a zero attractor to its iterations. The simulation results, which are obtained from a sparse channel estimation, demonstrate that the proposed LP-APA can efficiently improve channel estimation performance in terms of both the convergence speed and steady-state performance when the channel is exactly sparse.

  8. Beyond User Acceptance: A Legitimacy Framework for Potable Water Reuse in California.

    Science.gov (United States)

    Harris-Lovett, Sasha R; Binz, Christian; Sedlak, David L; Kiparsky, Michael; Truffer, Bernhard

    2015-07-07

    Water resource managers often tout the potential of potable water reuse to provide a reliable, local source of drinking water in water-scarce regions. Despite data documenting the ability of advanced treatment technologies to treat municipal wastewater effluent to meet existing drinking water quality standards, many utilities face skepticism from the public about potable water reuse. Prior research on this topic has mainly focused on marketing strategies for garnering public acceptance of the process. This study takes a broader perspective on the adoption of potable water reuse based on concepts of societal legitimacy, which is the generalized perception or assumption that a technology is desirable or appropriate within its social context. To assess why some potable reuse projects were successfully implemented while others faced fierce public opposition, we performed a series of 20 expert interviews and reviewed in-depth case studies from potable reuse projects in California. Results show that proponents of a legitimated potable water reuse project in Orange County, California engaged in a portfolio of strategies that addressed three main dimensions of legitimacy. In contrast, other proposed projects that faced extensive public opposition relied on a smaller set of legitimation strategies that focused near-exclusively on the development of robust water treatment technology. Widespread legitimation of potable water reuse projects, including direct potable water reuse, may require the establishment of a portfolio of standards, procedures, and possibly new institutions.

  9. Optimal Couple Projections for Domain Adaptive Sparse Representation-based Classification.

    Science.gov (United States)

    Zhang, Guoqing; Sun, Huaijiang; Porikli, Fatih; Liu, Yazhou; Sun, Quansen

    2017-08-29

    In recent years, sparse representation based classification (SRC) is one of the most successful methods and has been shown impressive performance in various classification tasks. However, when the training data has a different distribution than the testing data, the learned sparse representation may not be optimal, and the performance of SRC will be degraded significantly. To address this problem, in this paper, we propose an optimal couple projections for domain-adaptive sparse representation-based classification (OCPD-SRC) method, in which the discriminative features of data in the two domains are simultaneously learned with the dictionary that can succinctly represent the training and testing data in the projected space. OCPD-SRC is designed based on the decision rule of SRC, with the objective to learn coupled projection matrices and a common discriminative dictionary such that the between-class sparse reconstruction residuals of data from both domains are maximized, and the within-class sparse reconstruction residuals of data are minimized in the projected low-dimensional space. Thus, the resulting representations can well fit SRC and simultaneously have a better discriminant ability. In addition, our method can be easily extended to multiple domains and can be kernelized to deal with the nonlinear structure of data. The optimal solution for the proposed method can be efficiently obtained following the alternative optimization method. Extensive experimental results on a series of benchmark databases show that our method is better or comparable to many state-of-the-art methods.

  10. City of Iqaluit's climate change impacts, infrastructure risks and adaptive capacity project

    International Nuclear Information System (INIS)

    Nielsen, D.; Kronenberger, J.

    2007-03-01

    The City of Iqaluit is an Arctic community that is very susceptible to the stresses of climate change. The city is challenged by increased flooding, coastal erosion and ground instability caused by melting of the permafrost layer. In response, the City of Iqaluit has created policies to reduce greenhouse gases and act on climate change. A project has also been launched to develop adaptation strategies, with particular focus on infrastructure vulnerability given the environmental and climate change in the Canadian Arctic. The purpose of the study is to evaluate the biophysical exposure and hazards on Arctic coasts subject to effects of climate change, identify past and current management strategies used to manage risks in coastal communities which have already experienced environmental change, and to evaluate the adaptive capacity of communities for dealing with coastal hazards throughout the Arctic. This document identified the risks to Iqaluit's infrastructure, including buildings, roads, water supply, wastewater treatment and waste disposal systems. Adaptation options were also developed. These ranged from educational programs and retrofits to policy changes and building standard amendments. refs., tabs., figs

  11. The Sustainability of Community-Based Adaptation Projects in the Blue Nile Highlands of Ethiopia

    Directory of Open Access Journals (Sweden)

    Belay Simane

    2014-07-01

    Full Text Available Climate resilience in subsistence agricultural communities depends strongly on the robustness and effective management of the agricultural natural resource base. For this reason, adaptation planning efforts frequently focus on natural resource conservation as the primary motivation for and primary outcome of adaptation activities. Here, we present an analysis of the sustainability of community based adaptation (CBA activities in 20 community based organizations (CBO that were established in the Blue Nile Highlands of Ethiopia in order to promote resilience to climate change. CBA sustainability was assessed through multi-criteria analysis using the Analytic Hierarchy Process (AHP. Sustainability was considered for social, institutional, technical, financial, and environmental dimensions, with second-order indicators or factors defined for each dimension. According to this analysis, CBA efforts of two thirds of the COBs studied were found to be unsustainable in all dimensions and CBA efforts of the remaining CBOs were found to be at risk of unsustainability. A number of barriers to CBA sustainability were identified, including inadequacies in community participation, training of local community members, local government commitment, farmer capacity, and bureaucratic efficiency. Participatory evaluation of CBA, however, revealed that many of these barriers can be attributed to the decision to use conservation of natural resources as the primary framework for CBA activities. Based on this evaluation, new efforts have been developed that use markets as the entry and exit points for sustainability activities. Lessons learned in this project are relevant for CBA efforts in other agricultural regions of the developing world.

  12. Science Roles and Interactions in Adaptive Management of Large River Restoration Projects, Midwest United States

    Science.gov (United States)

    Jacobson, R. B.; Galat, D. L.; Smith, C. B.

    2010-12-01

    Most large-river restoration projects include formal or informal implementations of adaptive management strategies which acknowledge uncertainty and use scientific inquiry to learn and refine management options. Although the central role of science in reducing uncertainty is acknowledged in such projects, specific roles and interactions can vary widely, including how science relates to decision-making within the governance of these projects. Our objective is to present some structured generalizations about science roles and interactions as developed from the authors’ experiences in adaptive management of large river restoration in the Midwest United States. Scientific information may be introduced into decision making by scientists acting in any of the three roles common to adaptive management -- action agency representative, stakeholder, or science provider. We have observed that confusion and gridlock can arise when it is unclear if a scientist is acting as an advocate for a stakeholder or management position, or instead as an independent, “honest broker” of science. Although both advocacy and independence are proper and expected in public decision making, it is useful when scientists unambiguously identify their role. While complete scientific independence may be illusory, transparency and peer review can promote the ideal. Transparency comes from setting clear directions and objectives at the decision-making level and defining at the outset how learning will help assess progress and inform decisions. Independent peer reviews of proposals, study plans, and publications serve as a powerful tool to advance scientific independence, even if funding sources present a potential conflict of interest. Selection of experts for scientific advice and review often requires consideration of the balance between benefits of the “outside” expert (independent, knowledgeable but with little specific understanding of the river system), compared to those provided by the

  13. Adaptation response surfaces from an ensemble of wheat projections under climate change in Europe

    Science.gov (United States)

    Ruiz-Ramos, Margarita; Ferrise, Roberto

    2016-04-01

    preliminary ARSs show some adaptation options allow recover up to ca. 2000 kg/ha. Compared to the historical yields recorded at Lleida province (2550 kg/ha in 1981-2010) our results indicate that adaptation is feasible and may help to reduce detrimental effects of CC. Our analysis evaluates if the explored adaptations fulfill the biophysical requirements to become a practical adaptive solution. This study exemplifies how adaptation options and their impacts can be analyzed, evaluated and communicated in a context of high regional uncertainty for current and future conditions and for short to long-term perspective. This work was funded by MACSUR project within FACCE-JPI. References Abeledo, L.G., R. Savin and G.A. Slafer (2008). European Journal of Agronomy 28:541-550. Cartelle, J., A. Pedró, R. Savin, G.A. Slafer (2006) European Journal of Agronomy 25:365-371. Pirttioja, N., T. Carter, S. Fronzek, M. Bindi, H. Hoffmann, T. Palosuo, M. Ruiz-Ramos, F. Tao, M. Acutis, S. Asseng, P. Baranowski, B. Basso, P. Bodin, S. Buis, D. Cammarano, P. Deligios, M.-F. Destain, B. Dumont, R. Ewert, R. Ferrise, L. François, T. Gaiser, P. Hlavinka, I. Jacquemin, K.C. Kersebaum, C. Kollas, J. Krzyszczak, I.J. Lorite, J. Minet, M.I. Minguez, M. Montesino, M. Moriondo, C. Müller, C. Nendel, I. Öztürk, A. Perego, A. Rodríguez, A.C. Ruane, F. Ruget, M. Sanna, M.A. Semenov, C. Slawinski, P. Stratonovitch, I. Supit, K. Waha, E. Wang, L. Wu, Z. Zhao, and R.P. Rötter, 2015: A crop model ensemble analysis of temperature and precipitation effects on wheat yield across a European transect using impact response surfaces. Clim. Res., 65, 87-105, doi:10.3354/cr01322. IRS2 TEAM: Alfredo Rodríguez(1), Ignacio J. Lorite(3), Fulu Tao(4), Nina Pirttioja(5), Stefan Fronzek(5), Taru Palosuo(4), Timothy R. Carter(5), Marco Bindi(2), Jukka G Höhn(4), Kurt Christian Kersebaum(6), Miroslav Trnka(7,8), Holger Hoffmann(9), Piotr Baranowski(10), Samuel Buis(11), Davide Cammarano(12), Yi Chen(13,4), Paola Deligios

  14. Water reuse practices in the United States and abroad

    Energy Technology Data Exchange (ETDEWEB)

    Sheikh, B.

    1998-07-01

    Reuse of water reclaimed from waste takes various adaptations in different parts of the globe to accommodate the economic forces underlying water supply constraints and local public health and sanitation conditions. The more developed regions have adopted and enforced the most rigorous water reuse regulations. The strong environmental safeguards adopted and the immense investments made in these countries in wastewater treatment provide for a very high quality of discharged effluent. Unfortunately, high (even adequate) levels of investment in sanitation and environmental protection have been lacking in most of the rest of the world. In the developing nations of the world a de facto brand of water reuse is practiced, generally without the benefit of protective standards of acceptable public health practice. Between the extremes of high standards of public health protection on the one hand, and the unsanitary use of raw sewage on the other, there are wide varieties of uses and treatment levels dictated by and evolved to accommodate the local economy.

  15. Adapt

    Science.gov (United States)

    Bargatze, L. F.

    2015-12-01

    Active Data Archive Product Tracking (ADAPT) is a collection of software routines that permits one to generate XML metadata files to describe and register data products in support of the NASA Heliophysics Virtual Observatory VxO effort. ADAPT is also a philosophy. The ADAPT concept is to use any and all available metadata associated with scientific data to produce XML metadata descriptions in a consistent, uniform, and organized fashion to provide blanket access to the full complement of data stored on a targeted data server. In this poster, we present an application of ADAPT to describe all of the data products that are stored by using the Common Data File (CDF) format served out by the CDAWEB and SPDF data servers hosted at the NASA Goddard Space Flight Center. These data servers are the primary repositories for NASA Heliophysics data. For this purpose, the ADAPT routines have been used to generate data resource descriptions by using an XML schema named Space Physics Archive, Search, and Extract (SPASE). SPASE is the designated standard for documenting Heliophysics data products, as adopted by the Heliophysics Data and Model Consortium. The set of SPASE XML resource descriptions produced by ADAPT includes high-level descriptions of numerical data products, display data products, or catalogs and also includes low-level "Granule" descriptions. A SPASE Granule is effectively a universal access metadata resource; a Granule associates an individual data file (e.g. a CDF file) with a "parent" high-level data resource description, assigns a resource identifier to the file, and lists the corresponding assess URL(s). The CDAWEB and SPDF file systems were queried to provide the input required by the ADAPT software to create an initial set of SPASE metadata resource descriptions. Then, the CDAWEB and SPDF data repositories were queried subsequently on a nightly basis and the CDF file lists were checked for any changes such as the occurrence of new, modified, or deleted

  16. Understanding Functional Reuse of ERP Requirements in the Telecommunication Sector: an Empirical Study

    NARCIS (Netherlands)

    Daneva, Maia

    2014-01-01

    This paper is an empirical study on the application of Function Points (FP) and a FP-based reuse measurement model in Enterprise Resource Planning (ERP) projects in three organizations in the telecommunication sector. The findings of the study are used to compare the requirements reuse for one

  17. Theoretical information reuse and integration

    CERN Document Server

    Rubin, Stuart

    2016-01-01

    Information Reuse and Integration addresses the efficient extension and creation of knowledge through the exploitation of Kolmogorov complexity in the extraction and application of domain symmetry. Knowledge, which seems to be novel, can more often than not be recast as the image of a sequence of transformations, which yield symmetric knowledge. When the size of those transformations and/or the length of that sequence of transforms exceeds the size of the image, then that image is said to be novel or random. It may also be that the new knowledge is random in that no such sequence of transforms, which produces it exists, or is at least known. The nine chapters comprising this volume incorporate symmetry, reuse, and integration as overt operational procedures or as operations built into the formal representations of data and operators employed. Either way, the aforementioned theoretical underpinnings of information reuse and integration are supported.

  18. Three-dimensional anisotropic adaptive filtering of projection data for noise reduction in cone beam CT

    Energy Technology Data Exchange (ETDEWEB)

    Maier, Andreas; Wigstroem, Lars; Hofmann, Hannes G.; Hornegger, Joachim; Zhu Lei; Strobel, Norbert; Fahrig, Rebecca [Department of Radiology, Stanford University, Stanford, California 94305 (United States); Department of Radiology, Stanford University, Stanford, California 94305 (United States) and Center for Medical Image Science and Visualization, Linkoeping University, Linkoeping (Sweden); Pattern Recognition Laboratory, Department of Computer Science, Friedrich-Alexander University of Erlangen-Nuremberg, 91054, Erlangen (Germany); Nuclear and Radiological Engineering and Medical Physics Programs, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Siemens AG Healthcare, Forchheim 91301 (Germany); Department of Radiology, Stanford University, Stanford, California 94305 (United States)

    2011-11-15

    Purpose: The combination of quickly rotating C-arm gantry with digital flat panel has enabled the acquisition of three-dimensional data (3D) in the interventional suite. However, image quality is still somewhat limited since the hardware has not been optimized for CT imaging. Adaptive anisotropic filtering has the ability to improve image quality by reducing the noise level and therewith the radiation dose without introducing noticeable blurring. By applying the filtering prior to 3D reconstruction, noise-induced streak artifacts are reduced as compared to processing in the image domain. Methods: 3D anisotropic adaptive filtering was used to process an ensemble of 2D x-ray views acquired along a circular trajectory around an object. After arranging the input data into a 3D space (2D projections + angle), the orientation of structures was estimated using a set of differently oriented filters. The resulting tensor representation of local orientation was utilized to control the anisotropic filtering. Low-pass filtering is applied only along structures to maintain high spatial frequency components perpendicular to these. The evaluation of the proposed algorithm includes numerical simulations, phantom experiments, and in-vivo data which were acquired using an AXIOM Artis dTA C-arm system (Siemens AG, Healthcare Sector, Forchheim, Germany). Spatial resolution and noise levels were compared with and without adaptive filtering. A human observer study was carried out to evaluate low-contrast detectability. Results: The adaptive anisotropic filtering algorithm was found to significantly improve low-contrast detectability by reducing the noise level by half (reduction of the standard deviation in certain areas from 74 to 30 HU). Virtually no degradation of high contrast spatial resolution was observed in the modulation transfer function (MTF) analysis. Although the algorithm is computationally intensive, hardware acceleration using Nvidia's CUDA Interface provided an 8

  19. Three-dimensional anisotropic adaptive filtering of projection data for noise reduction in cone beam CT

    International Nuclear Information System (INIS)

    Maier, Andreas; Wigstroem, Lars; Hofmann, Hannes G.; Hornegger, Joachim; Zhu Lei; Strobel, Norbert; Fahrig, Rebecca

    2011-01-01

    Purpose: The combination of quickly rotating C-arm gantry with digital flat panel has enabled the acquisition of three-dimensional data (3D) in the interventional suite. However, image quality is still somewhat limited since the hardware has not been optimized for CT imaging. Adaptive anisotropic filtering has the ability to improve image quality by reducing the noise level and therewith the radiation dose without introducing noticeable blurring. By applying the filtering prior to 3D reconstruction, noise-induced streak artifacts are reduced as compared to processing in the image domain. Methods: 3D anisotropic adaptive filtering was used to process an ensemble of 2D x-ray views acquired along a circular trajectory around an object. After arranging the input data into a 3D space (2D projections + angle), the orientation of structures was estimated using a set of differently oriented filters. The resulting tensor representation of local orientation was utilized to control the anisotropic filtering. Low-pass filtering is applied only along structures to maintain high spatial frequency components perpendicular to these. The evaluation of the proposed algorithm includes numerical simulations, phantom experiments, and in-vivo data which were acquired using an AXIOM Artis dTA C-arm system (Siemens AG, Healthcare Sector, Forchheim, Germany). Spatial resolution and noise levels were compared with and without adaptive filtering. A human observer study was carried out to evaluate low-contrast detectability. Results: The adaptive anisotropic filtering algorithm was found to significantly improve low-contrast detectability by reducing the noise level by half (reduction of the standard deviation in certain areas from 74 to 30 HU). Virtually no degradation of high contrast spatial resolution was observed in the modulation transfer function (MTF) analysis. Although the algorithm is computationally intensive, hardware acceleration using Nvidia's CUDA Interface provided an 8.9-fold

  20. Integrating reuse measurement practices into the ERP requirements engineering process

    NARCIS (Netherlands)

    Daneva, Maia; Münich, Jürgen; Vierimaa, Matias

    2006-01-01

    The management and deployment of reuse-driven and architecturecentric requirements engineering processes have become common in many organizations adopting Enterprise Resource Planning solutions. Yet, little is known about the variety of reusability aspects in ERP projects at the level of

  1. Practicum in adapted physical activity: a Dewey-inspired action research project.

    Science.gov (United States)

    Standal, Øyvind; Rugseth, Gro

    2014-07-01

    The purpose of this study was to investigate what adapted physical activity (APA) students learn from their practicum experiences. One cohort of APA students participated, and data were generated from an action research project that included observations, reflective journals, and a focus group interview. The theoretical framework for the study was Dewey's and Wackerhausen's theories of reflections. The findings show the objects of students' reflections, the kind of conceptual resources they draw on while reflecting, and their knowledge interests. In addition, two paradoxes are identified: the tension between reflecting from and on own values, and how practicum as a valued experience of reality can become too difficult to handle. In conclusion, we reflect on how practicum learning can be facilitated.

  2. Robust breathing signal extraction from cone beam CT projections based on adaptive and global optimization techniques

    International Nuclear Information System (INIS)

    Chao, Ming; Yuan, Yading; Rosenzweig, Kenneth E; Lo, Yeh-Chi; Wei, Jie; Li, Tianfang

    2016-01-01

    We present a study of extracting respiratory signals from cone beam computed tomography (CBCT) projections within the framework of the Amsterdam Shroud (AS) technique. Acquired prior to the radiotherapy treatment, CBCT projections were preprocessed for contrast enhancement by converting the original intensity images to attenuation images with which the AS image was created. An adaptive robust z-normalization filtering was applied to further augment the weak oscillating structures locally. From the enhanced AS image, the respiratory signal was extracted using a two-step optimization approach to effectively reveal the large-scale regularity of the breathing signals. CBCT projection images from five patients acquired with the Varian Onboard Imager on the Clinac iX System Linear Accelerator (Varian Medical Systems, Palo Alto, CA) were employed to assess the proposed technique. Stable breathing signals can be reliably extracted using the proposed algorithm. Reference waveforms obtained using an air bellows belt (Philips Medical Systems, Cleveland, OH) were exported and compared to those with the AS based signals. The average errors for the enrolled patients between the estimated breath per minute (bpm) and the reference waveform bpm can be as low as  −0.07 with the standard deviation 1.58. The new algorithm outperformed the original AS technique for all patients by 8.5% to 30%. The impact of gantry rotation on the breathing signal was assessed with data acquired with a Quasar phantom (Modus Medical Devices Inc., London, Canada) and found to be minimal on the signal frequency. The new technique developed in this work will provide a practical solution to rendering markerless breathing signal using the CBCT projections for thoracic and abdominal patients. (paper)

  3. Beneficial Reuse of San Ardo Produced Water

    Energy Technology Data Exchange (ETDEWEB)

    Robert A. Liske

    2006-07-31

    This DOE funded study was performed to evaluate the potential for treatment and beneficial reuse of produced water from the San Ardo oilfield in Monterey County, CA. The potential benefits of a successful full-scale implementation of this project include improvements in oil production efficiency and additional recoverable oil reserves as well as the addition of a new reclaimed water resource. The overall project was conducted in two Phases. Phase I identified and evaluated potential end uses for the treated produced water, established treated water quality objectives, reviewed regulations related to treatment, transport, storage and use of the treated produced water, and investigated various water treatment technology options. Phase II involved the construction and operation of a small-scale water treatment pilot facility to evaluate the process's performance on produced water from the San Ardo oilfield. Cost estimates for a potential full-scale facility were also developed. Potential end uses identified for the treated water include (1) agricultural use near the oilfield, (2) use by Monterey County Water Resources Agency (MCWRA) for the Salinas Valley Water Project or Castroville Seawater Intrusion Project, (3) industrial or power plant use in King City, and (4) use for wetlands creation in the Salinas Basin. All of these uses were found to have major obstacles that prevent full-scale implementation. An additional option for potential reuse of the treated produced water was subsequently identified. That option involves using the treated produced water to recharge groundwater in the vicinity of the oil field. The recharge option may avoid the limitations that the other reuse options face. The water treatment pilot process utilized: (1) warm precipitation softening to remove hardness and silica, (2) evaporative cooling to meet downstream temperature limitations and facilitate removal of ammonia, and (3) reverse osmosis (RO) for removal of dissolved salts, boron

  4. Comparison of adaptive statistical iterative and filtered back projection reconstruction techniques in quantifying coronary calcium.

    Science.gov (United States)

    Takahashi, Masahiro; Kimura, Fumiko; Umezawa, Tatsuya; Watanabe, Yusuke; Ogawa, Harumi

    2016-01-01

    Adaptive statistical iterative reconstruction (ASIR) has been used to reduce radiation dose in cardiac computed tomography. However, change of image parameters by ASIR as compared to filtered back projection (FBP) may influence quantification of coronary calcium. To investigate the influence of ASIR on calcium quantification in comparison to FBP. In 352 patients, CT images were reconstructed using FBP alone, FBP combined with ASIR 30%, 50%, 70%, and ASIR 100% based on the same raw data. Image noise, plaque density, Agatston scores and calcium volumes were compared among the techniques. Image noise, Agatston score, and calcium volume decreased significantly with ASIR compared to FBP (each P ASIR reduced Agatston score by 10.5% to 31.0%. In calcified plaques both of patients and a phantom, ASIR decreased maximum CT values and calcified plaque size. In comparison to FBP, adaptive statistical iterative reconstruction (ASIR) may significantly decrease Agatston scores and calcium volumes. Copyright © 2016 Society of Cardiovascular Computed Tomography. Published by Elsevier Inc. All rights reserved.

  5. South Africa: Necsa redevelopment and reuse case and history

    International Nuclear Information System (INIS)

    Fourie, E.; Visagie, A.

    2008-01-01

    The purpose of this document is to share the experience gained from the decommissioning and redevelopment of redundant Necsa buildings in order to assist in the compilation of a holistic future redevelopment and reuse plan for the Necsa site. This document aims to ensure optimisation of decommissioning and redevelopment actions. This document also aims to facilitate timely and efficient completion of decommissioning projects in that it highlights alternatives for effective Redevelopment and Reuse (R and R) of buildings currently in a decommissioning phase. (author)

  6. Water reuse in the Apatlaco River Basin (México): a feasibility study.

    Science.gov (United States)

    Moeller-Chávez, G; Seguí-Amórtegui, L; Alfranca-Burriel, O; Escalante-Estrada, V; Pozo-Román, F; Rivas-Hernández, A

    2004-01-01

    The aim of this work is to determine the technical and economic feasibility of implementing different reclamation and reuse projects that improve the quality of the Apatlaco river basin located in the central part of Mexico. A special methodology based on a decision support system was developed. This methodology allows to decide if it is convenient or not to finance a reclamation or reuse project for the most common water uses in the basin. This methodology is based on the net present value criteria (NPV) of the effective cash flow during the useful life of the project. The results obtained reveal a technical and economical feasibility for industrial reuse in Jiutepec and for agricultural reuse in Zacatepec and Emiliano Zapata. On the other hand, sanitation projects are not feasible in all cases analyzed. Therefore, Mexican Regulation (Ley Federal de Derechos en Materia de Agua) as currently implemented, does not promote and support this kind of projects.

  7. Water Reuse and Pathogen Tracking

    Science.gov (United States)

    Building product water. By designing our buildings to collect and treat water generated on-site, can be and reused for flushing our toilets and irrigating our landscaping. Several water sources are generated with-in a building including: rainwater, stormwater, graywater, blackwa...

  8. Reduced analysis and confirmatory research on co-adaptability theoretical solution to conflicting events in construction engineering projects

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The co-adaptability theoretical solution to conflicting events in construction engineering projects has three problems. First, the transformation of constraint conditions of theoretical solution is very difficult in practical engineering applications; second, some coefficients are difficult to be determined; third, there are overfull circular arithmetic operations involved in it. To resolve these problems, a new method to reduce the theoretical solution complications is proposed. By analyzing the operating mechanism of theoretical solution model, redundancies in the theoretical solution can be eliminated, and the ISM mapping with the co-adaptability solution can be set up. Based on this approach, a procedure to solve practical conflicting events in construction projects is established by replacing characteristic variables with mathematic variables. The research results show that the procedure can replace the co-adaptability theoretical solution effectively and solve practical conflicting events in construction projects.

  9. UV disinfection for reuse applications in North America.

    Science.gov (United States)

    Sakamoto, G; Schwartzel, D; Tomowich, D

    2001-01-01

    In an effort to conserve and protect limited water resources, the States of Florida and California have actively promoted wastewater reclamation and have implemented comprehensive regulations covering a range of reuse applications. Florida has a semi-tropical climate with heavy summer rains that are lost due to run off and evaporation. Much of California is arid and suffers periodic droughts, low annual rainfall and depleted ground water supplies. The high population density combined with heavy irrigation demands has depleted ground water supplies resulting in salt-water intrusion. During the past decade, Florida reuse sites have increased dramatically from 118 to 444 plants representing a total flow capacity of 826 MGD. California presently has over 250 plants producing 1 BGD with a projected increase of 160 sites over the next 20 years. To prevent the transmission of waterborne diseases, disinfection of reclaimed water is controlled by stringent regulations. Many states regulate wastewater treatment processes, nutrient removal, final effluent quality and disinfection criteria based upon the specific reuse application. As a rule, the resulting effluents have low turbidity and suspended solids. For such effluents, UV technology can economically achieve the most stringent disinfection targets that are required by the States of California and Florida for restricted and unrestricted reuse. This paper compares UV disinfection for wastewater reuse sites in California and Florida and discusses the effect of effluent quality on UV disinfection.

  10. Rift Valley fever dynamics in Senegal: a project for pro-active adaptation and improvement of livestock raising management

    Directory of Open Access Journals (Sweden)

    Murielle Lafaye

    2013-11-01

    Full Text Available The multi-disciplinary French projectAdaptation à la Fièvre de la Vallée du Rift” (AdaptFVR has concluded a 10-year constructive interaction between many scientists/partners involved with the Rift Valley fever (RVF dynamics in Senegal. The three targeted objectives reached were (i to produce - in near real-time - validated risk maps for parked livestock exposed to RVF mosquitoes/vectors bites; (ii to assess the impacts on RVF vectors from climate variability at different time-scales including climate change; and (iii to isolate processes improving local livestock management and animal health. Based on these results, concrete, pro-active adaptive actions were taken on site, which led to the establishment of a RVF early warning system (RVFews. Bulletins were released in a timely fashion during the project, tested and validated in close collaboration with the local populations, i.e. the primary users. Among the strategic, adaptive methods developed, conducted and evaluated in terms of cost/benefit analyses are the larvicide campaigns and the coupled bio-mathematical (hydrological and entomological model technologies, which are being transferred to the staff of the “Centre de Suivi Ecologique” (CSE in Dakar during 2013. Based on the results from the AdaptFVR project, other projects with similar conceptual and modelling approaches are currently being implemented, e.g. for urban and rural malaria and dengue in the French Antilles.

  11. Robust Adaptive Sliding Mode Control for Generalized Function Projective Synchronization of Different Chaotic Systems with Unknown Parameters

    Directory of Open Access Journals (Sweden)

    Xiuchun Li

    2013-01-01

    Full Text Available When the parameters of both drive and response systems are all unknown, an adaptive sliding mode controller, strongly robust to exotic perturbations, is designed for realizing generalized function projective synchronization. Sliding mode surface is given and the controlled system is asymptotically stable on this surface with the passage of time. Based on the adaptation laws and Lyapunov stability theory, an adaptive sliding controller is designed to ensure the occurrence of the sliding motion. Finally, numerical simulations are presented to verify the effectiveness and robustness of the proposed method even when both drive and response systems are perturbed with external disturbances.

  12. Linking Mitigation and Adaptation in Carbon Forestry Projects: Evidence from Belize

    DEFF Research Database (Denmark)

    Kongsager, Rico; Corbera, Esteve

    2015-01-01

    that linking mitigation and adaptation has not been possible, because the mandate of forest carbon markets does not incorporate adaptation concerns. The projects’ contribution to forest ecosystems’ adaptation, for instance, by reducing human encroachments and by increasing ecosystem connectivity, has been...... instead to promote more holistic and territorial-based approaches targeting both mitigation and adaptation goals....

  13. Attitudes and norms affecting scientists' data reuse.

    Directory of Open Access Journals (Sweden)

    Renata Gonçalves Curty

    Full Text Available The value of sharing scientific research data is widely appreciated, but factors that hinder or prompt the reuse of data remain poorly understood. Using the Theory of Reasoned Action, we test the relationship between the beliefs and attitudes of scientists towards data reuse, and their self-reported data reuse behaviour. To do so, we used existing responses to selected questions from a worldwide survey of scientists developed and administered by the DataONE Usability and Assessment Working Group (thus practicing data reuse ourselves. Results show that the perceived efficacy and efficiency of data reuse are strong predictors of reuse behaviour, and that the perceived importance of data reuse corresponds to greater reuse. Expressed lack of trust in existing data and perceived norms against data reuse were not found to be major impediments for reuse contrary to our expectations. We found that reported use of models and remotely-sensed data was associated with greater reuse. The results suggest that data reuse would be encouraged and normalized by demonstration of its value. We offer some theoretical and practical suggestions that could help to legitimize investment and policies in favor of data sharing.

  14. An adaptive case management system to support integrated care services: Lessons learned from the NEXES project.

    Science.gov (United States)

    Cano, Isaac; Alonso, Albert; Hernandez, Carme; Burgos, Felip; Barberan-Garcia, Anael; Roldan, Jim; Roca, Josep

    2015-06-01

    Extensive deployment and sustainability of integrated care services (ICS) constitute an unmet need to reduce the burden of chronic conditions. The European Union project NEXES (2008-2013) assessed the deployment of four ICS encompassing the spectrum of severity of chronic patients. The current study aims to (i) describe the open source Adaptive Case Management (ACM) system (Linkcare®) developed to support the deployment of ICS at the level of healthcare district; (ii) to evaluate its performance; and, (iii) to identify key challenges for regional deployment of ICS. We first defined a conceptual model for ICS management and execution composed of five main stages. We then specified an associated logical model considering the dynamic runtime of ACM. Finally, we implemented the four ICS as a physical model with an ICS editor to allow professionals (case managers) to play active roles in adapting the system to their needs. Instances of ICS were then run in Linkcare®. Four ICS provided a framework for evaluating the system: Wellness and Rehabilitation (W&R) (number of patients enrolled in the study (n)=173); Enhanced Care (EC) in frail chronic patients to prevent hospital admissions, (n=848); Home Hospitalization and Early Discharge (HH/ED) (n=2314); and, Support to remote diagnosis (Support) (n=7793). The method for assessment of telemedicine applications (MAST) was used for iterative evaluation. Linkcare® supports ACM with shared-care plans across healthcare tiers and offers integration with provider-specific electronic health records. Linkcare® successfully contributed to the deployment of the four ICS: W&R facilitated long-term sustainability of training effects (p<0.01) and active life style (p<0.03); EC showed significant positive outcomes (p<0.05); HH/ED reduced on average 5 in-hospital days per patient with a 30-d re-admission rate of 10%; and, Support, enhanced community-based quality forced spirometry testing (p<0.01). Key challenges for regional deployment

  15. Quantifying the effect of autonomous adaptation to global river flood projections: application to future flood risk assessments

    Science.gov (United States)

    Kinoshita, Youhei; Tanoue, Masahiro; Watanabe, Satoshi; Hirabayashi, Yukiko

    2018-01-01

    This study represents the first attempt to quantify the effects of autonomous adaptation on the projection of global flood hazards and to assess future flood risk by including this effect. A vulnerability scenario, which varies according to the autonomous adaptation effect for conventional disaster mitigation efforts, was developed based on historical vulnerability values derived from flood damage records and a river inundation simulation. Coupled with general circulation model outputs and future socioeconomic scenarios, potential future flood fatalities and economic loss were estimated. By including the effect of autonomous adaptation, our multimodel ensemble estimates projected a 2.0% decrease in potential flood fatalities and an 821% increase in potential economic losses by 2100 under the highest emission scenario together with a large population increase. Vulnerability changes reduced potential flood consequences by 64%-72% in terms of potential fatalities and 28%-42% in terms of potential economic losses by 2100. Although socioeconomic changes made the greatest contribution to the potential increased consequences of future floods, about a half of the increase of potential economic losses was mitigated by autonomous adaptation. There is a clear and positive relationship between the global temperature increase from the pre-industrial level and the estimated mean potential flood economic loss, while there is a negative relationship with potential fatalities due to the autonomous adaptation effect. A bootstrapping analysis suggests a significant increase in potential flood fatalities (+5.7%) without any adaptation if the temperature increases by 1.5 °C-2.0 °C, whereas the increase in potential economic loss (+0.9%) was not significant. Our method enables the effects of autonomous adaptation and additional adaptation efforts on climate-induced hazards to be distinguished, which would be essential for the accurate estimation of the cost of adaptation to

  16. WRF4G project: Adaptation of WRF Model to Distributed Computing Infrastructures

    Science.gov (United States)

    Cofino, Antonio S.; Fernández Quiruelas, Valvanuz; García Díez, Markel; Blanco Real, Jose C.; Fernández, Jesús

    2013-04-01

    Nowadays Grid Computing is powerful computational tool which is ready to be used for scientific community in different areas (such as biomedicine, astrophysics, climate, etc.). However, the use of this distributed computing infrastructures (DCI) is not yet common practice in climate research, and only a few teams and applications in this area take advantage of this infrastructure. Thus, the first objective of this project is to popularize the use of this technology in the atmospheric sciences area. In order to achieve this objective, one of the most used applications has been taken (WRF; a limited- area model, successor of the MM5 model), that has a user community formed by more than 8000 researchers worldwide. This community develop its research activity on different areas and could benefit from the advantages of Grid resources (case study simulations, regional hind-cast/forecast, sensitivity studies, etc.). The WRF model is been used as input by many energy and natural hazards community, therefore those community will also benefit. However, Grid infrastructures have some drawbacks for the execution of applications that make an intensive use of CPU and memory for a long period of time. This makes necessary to develop a specific framework (middleware). This middleware encapsulates the application and provides appropriate services for the monitoring and management of the jobs and the data. Thus, the second objective of the project consists on the development of a generic adaptation of WRF for Grid (WRF4G), to be distributed as open-source and to be integrated in the official WRF development cycle. The use of this WRF adaptation should be transparent and useful to face any of the previously described studies, and avoid any of the problems of the Grid infrastructure. Moreover it should simplify the access to the Grid infrastructures for the research teams, and also to free them from the technical and computational aspects of the use of the Grid. Finally, in order to

  17. Ionizing radiation and water reuse

    International Nuclear Information System (INIS)

    Borrely, Sueli Ivone; Sampa, Maria Helena de Oliveira; Oikawa, Hiroshi; Silveira, Carlos Gaia da; Duarte, Celina Lopes; Cherbakian, Eloisa Helena

    2002-01-01

    The aim of the present paper is to point out the possibility of including ionizing radiation for wastewater treatment and reuse. Radiation processing is an efficient technology which can be useful for water reuse once the process can reduce not only the biological contamination but also organic substances, promoting an important acute toxicity removal from aquatic resources. Final secondary effluents from three different wastewater treatment plant were submitted to electron beam radiation and the process efficacy was evaluated. Concerning disinfection, relatively low radiation doses (2,0 - 4,0 kGy) accounted for 4 to 6 cycle log reduction for total coliforms. When radiation was applied for general wastewater improvement related to the chemical contamination, radiation process reduced from 78% up to 100% the total acute toxicity, measured for crustaceans, D. similis, and for V. fiscehri bacteria. (author)

  18. Adaptive wing : Investigations of passive wing technologies for loads reduction in the cleansky smart fixed wing aircraft (SFWA) project

    NARCIS (Netherlands)

    Kruger, W.R.; Dillinger, J; De Breuker, R.; Reyes, M.; Haydn, K.

    2016-01-01

    In the work package “Adaptive Wing” in the Clean-Sky “Smart Fixed Wing Aircraft” (SFWA) project, design processes and solutions for aircraft wings have been created, giving optimal response with respect to loads, comfort and performance by the introduction of passive and active concepts. Central

  19. Projective analysis of staple food crop productivity in adaptation to future climate change in China.

    Science.gov (United States)

    Zhang, Qing; Zhang, Wen; Li, Tingting; Sun, Wenjuan; Yu, Yongqiang; Wang, Guocheng

    2017-08-01

    Climate change continually affects our capabilities to feed the increasing population. Rising temperatures have the potential to shorten the crop growth duration and therefore reduce crop yields. In the past decades, China has successfully improved crop cultivars to stabilize, and even lengthen, the crop growth duration to make use of increasing heat resources. However, because of the complex cropping systems in the different regions of China, the possibility and the effectiveness of regulating crop growth duration to reduce the negative impacts of future climate change remain questionable. Here, we performed a projective analysis of the staple food crop productivity in double-rice, wheat-rice, wheat-maize, single-rice, and single-maize cropping systems in China using modeling approaches. The results indicated that from the present to the 2040s, the warming climate would shorten the growth duration of the current rice, wheat, and maize cultivars by 2-24, 11-13, and 9-29 days, respectively. The most significant shortening of the crop growth duration would be in Northeast China, where single-rice and single-maize cropping dominates the croplands. The shortened crop growth duration would consequently reduce crop productivity. The most significant decreases would be 27-31, 6-20, and 7-22% for the late crop in the double-rice rotation, wheat in the winter wheat-rice rotation, and single maize, respectively. However, our projection analysis also showed that the negative effects of the warming climate could be compensated for by stabilizing the growth duration of the crops via improvement in crop cultivars. In this case, the productivity of rice, wheat, and maize in the 2040s would increase by 4-16, 31-38, and 11-12%, respectively. Our modeling results implied that the possibility of securing future food production exists by adopting proper adaptation options in China.

  20. Projective analysis of staple food crop productivity in adaptation to future climate change in China

    Science.gov (United States)

    Zhang, Qing; Zhang, Wen; Li, Tingting; Sun, Wenjuan; Yu, Yongqiang; Wang, Guocheng

    2017-08-01

    Climate change continually affects our capabilities to feed the increasing population. Rising temperatures have the potential to shorten the crop growth duration and therefore reduce crop yields. In the past decades, China has successfully improved crop cultivars to stabilize, and even lengthen, the crop growth duration to make use of increasing heat resources. However, because of the complex cropping systems in the different regions of China, the possibility and the effectiveness of regulating crop growth duration to reduce the negative impacts of future climate change remain questionable. Here, we performed a projective analysis of the staple food crop productivity in double-rice, wheat-rice, wheat-maize, single-rice, and single-maize cropping systems in China using modeling approaches. The results indicated that from the present to the 2040s, the warming climate would shorten the growth duration of the current rice, wheat, and maize cultivars by 2-24, 11-13, and 9-29 days, respectively. The most significant shortening of the crop growth duration would be in Northeast China, where single-rice and single-maize cropping dominates the croplands. The shortened crop growth duration would consequently reduce crop productivity. The most significant decreases would be 27-31, 6-20, and 7-22% for the late crop in the double-rice rotation, wheat in the winter wheat-rice rotation, and single maize, respectively. However, our projection analysis also showed that the negative effects of the warming climate could be compensated for by stabilizing the growth duration of the crops via improvement in crop cultivars. In this case, the productivity of rice, wheat, and maize in the 2040s would increase by 4-16, 31-38, and 11-12%, respectively. Our modeling results implied that the possibility of securing future food production exists by adopting proper adaptation options in China.

  1. Adaptive generalized matrix projective lag synchronization between two different complex networks with non-identical nodes and different dimensions

    International Nuclear Information System (INIS)

    Dai Hao; Jia Li-Xin; Zhang Yan-Bin

    2012-01-01

    The adaptive generalized matrix projective lag synchronization between two different complex networks with non-identical nodes and different dimensions is investigated in this paper. Based on Lyapunov stability theory and Barbalat's lemma, generalized matrix projective lag synchronization criteria are derived by using the adaptive control method. Furthermore, each network can be undirected or directed, connected or disconnected, and nodes in either network may have identical or different dynamics. The proposed strategy is applicable to almost all kinds of complex networks. In addition, numerical simulation results are presented to illustrate the effectiveness of this method, showing that the synchronization speed is sensitively influenced by the adaptive law strength, the network size, and the network topological structure. (general)

  2. Formalisms for reuse and systems integration

    CERN Document Server

    Rubin, Stuart

    2015-01-01

    Reuse and integration are defined as synergistic concepts, where reuse addresses how to minimize redundancy in the creation of components; while, integration focuses on component composition. Integration supports reuse and vice versa. These related concepts support the design of software and systems for maximizing performance while minimizing cost. Knowledge, like data, is subject to reuse; and, each can be interpreted as the other. This means that inherent complexity, a measure of the potential utility of a system, is directly proportional to the extent to which it maximizes reuse and integration. Formal methods can provide an appropriate context for the rigorous handling of these synergistic concepts. Furthermore, formal languages allow for non ambiguous model specification; and, formal verification techniques provide support for insuring the validity of reuse and integration mechanisms.   This edited book includes 12 high quality research papers written by experts in formal aspects of reuse and integratio...

  3. Assessing gait adaptability in people with a unilateral amputation on an instrumented treadmill with a projected visual context.

    Science.gov (United States)

    Houdijk, Han; van Ooijen, Mariëlle W; Kraal, Jos J; Wiggerts, Henri O; Polomski, Wojtek; Janssen, Thomas W J; Roerdink, Melvyn

    2012-11-01

    Gait adaptability, including the ability to avoid obstacles and to take visually guided steps, is essential for safe movement through a cluttered world. This aspect of walking ability is important for regaining independent mobility but is difficult to assess in clinical practice. The objective of this study was to investigate the validity of an instrumented treadmill with obstacles and stepping targets projected on the belt's surface for assessing prosthetic gait adaptability. This was an observational study. A control group of people who were able bodied (n=12) and groups of people with transtibial (n=12) and transfemoral (n=12) amputations participated. Participants walked at a self-selected speed on an instrumented treadmill with projected visual obstacles and stepping targets. Gait adaptability was evaluated in terms of anticipatory and reactive obstacle avoidance performance (for obstacles presented 4 steps and 1 step ahead, respectively) and accuracy of stepping on regular and irregular patterns of stepping targets. In addition, several clinical tests were administered, including timed walking tests and reports of incidence of falls and fear of falling. Obstacle avoidance performance and stepping accuracy were significantly lower in the groups with amputations than in the control group. Anticipatory obstacle avoidance performance was moderately correlated with timed walking test scores. Reactive obstacle avoidance performance and stepping accuracy performance were not related to timed walking tests. Gait adaptability scores did not differ in groups stratified by incidence of falls or fear of falling. Because gait adaptability was affected by walking speed, differences in self-selected walking speed may have diminished differences in gait adaptability between groups. Gait adaptability can be validly assessed by use of an instrumented treadmill with a projected visual context. When walking speed is taken into account, this assessment provides unique

  4. Dual Adaptive Filtering by Optimal Projection Applied to Filter Muscle Artifacts on EEG and Comparative Study

    Directory of Open Access Journals (Sweden)

    Samuel Boudet

    2014-01-01

    Full Text Available Muscle artifacts constitute one of the major problems in electroencephalogram (EEG examinations, particularly for the diagnosis of epilepsy, where pathological rhythms occur within the same frequency bands as those of artifacts. This paper proposes to use the method dual adaptive filtering by optimal projection (DAFOP to automatically remove artifacts while preserving true cerebral signals. DAFOP is a two-step method. The first step consists in applying the common spatial pattern (CSP method to two frequency windows to identify the slowest components which will be considered as cerebral sources. The two frequency windows are defined by optimizing convolutional filters. The second step consists in using a regression method to reconstruct the signal independently within various frequency windows. This method was evaluated by two neurologists on a selection of 114 pages with muscle artifacts, from 20 clinical recordings of awake and sleeping adults, subject to pathological signals and epileptic seizures. A blind comparison was then conducted with the canonical correlation analysis (CCA method and conventional low-pass filtering at 30 Hz. The filtering rate was 84.3% for muscle artifacts with a 6.4% reduction of cerebral signals even for the fastest waves. DAFOP was found to be significantly more efficient than CCA and 30 Hz filters. The DAFOP method is fast and automatic and can be easily used in clinical EEG recordings.

  5. Waste water reuse pathways for processing tomato

    DEFF Research Database (Denmark)

    Battilani, A; Plauborg, Finn; Andersen, Mathias Neumann

      Direct or indirect water reuse involves several aspects: contamination by faecal, inorganic and xenobiotic pollutants; high levels of suspended solids and salinity; rational use of the dissolved nutrients (particularly nitrogen). The challenge is apply new strategies and technologies which allows...... to use the lowest irrigation water quality without harming nor food safety neither yield and fruit or derivatives quality. The EU project SAFIR aims help farmers solve problems with low quality water and decreased access to water. New water treatment devices (prototypes) are under development to allow...... a safe use of waste water produced by small communities/industries (≤2000 EI) or of treated water discharged in irrigation channels. Water treatment technologies are coupled with irrigation strategies and technologies to obtain a flexible, easy to use, integrated management....

  6. Network models for solving the problem of multicriterial adaptive optimization of investment projects control with several acceptable technologies

    Science.gov (United States)

    Shorikov, A. F.; Butsenko, E. V.

    2017-10-01

    This paper discusses the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. On the basis of network modeling proposed a new economic and mathematical model and a method for solving the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. Network economic and mathematical modeling allows you to determine the optimal time and calendar schedule for the implementation of the investment project and serves as an instrument to increase the economic potential and competitiveness of the enterprise. On a meaningful practical example, the processes of forming network models are shown, including the definition of the sequence of actions of a particular investment projecting process, the network-based work schedules are constructed. The calculation of the parameters of network models is carried out. Optimal (critical) paths have been formed and the optimal time for implementing the chosen technologies of the investment project has been calculated. It also shows the selection of the optimal technology from a set of possible technologies for project implementation, taking into account the time and cost of the work. The proposed model and method for solving the problem of managing investment projects can serve as a basis for the development, creation and application of appropriate computer information systems to support the adoption of managerial decisions by business people.

  7. Climate change adaptation accounting for huge uncertainties in future projections - the case of urban drainage

    Science.gov (United States)

    Willems, Patrick

    2015-04-01

    Hydrological design parameters, which are currently used in the guidelines for the design of urban drainage systems (Willems et al., 2013) have been revised, taking the Flanders region of Belgium as case study. The revision involved extrapolation of the design rainfall statistics, taking into account the current knowledge on future climate change trends till 2100. Uncertainties in these trend projections have been assessed after statistically analysing and downscaling by a quantile perturbation tool based on a broad ensemble set of climate model simulation results (44 regional + 69 global control-scenario climate model run combinations for different greenhouse gas scenarios). The impact results of the climate scenarios were investigated as changes to rainfall intensity-duration-frequency (IDF) curves. Thereafter, the climate scenarios and related changes in rainfall statistics were transferred to changes in flood frequencies of sewer systems and overflow frequencies of storage facilities. This has been done based on conceptual urban drainage models. Also the change in storage capacity required to exceed a given overflow return period, has been calculated for a range of return periods and infiltration or throughflow rates. These results were used on the basis of the revision of the hydraulic design rules of urban drainage systems. One of the major challenges while formulating these policy guidelines was the consideration of the huge uncertainties in the future climate change projections and impact assessments; see also the difficulties and pitfalls reported by the IWA/IAHR Joint Committee on Urban Drainage - Working group on urban rainfall (Willems et al., 2012). We made use of the risk concept, and found it a very useful approach to deal with the high uncertainties. It involves an impact study of the different climate projections, or - for practical reasons - a reduced set of climate scenarios tailored for the specific type of impact considered (urban floods in our

  8. Value-based management of design reuse

    Science.gov (United States)

    Carballo, Juan Antonio; Cohn, David L.; Belluomini, Wendy; Montoye, Robert K.

    2003-06-01

    Effective design reuse in electronic products has the potential to provide very large cost savings, substantial time-to-market reduction, and extra sources of revenue. Unfortunately, critical reuse opportunities are often missed because, although they provide clear value to the corporation, they may not benefit the business performance of an internal organization. It is therefore crucial to provide tools to help reuse partners participate in a reuse transaction when the transaction provides value to the corporation as a whole. Value-based Reuse Management (VRM) addresses this challenge by (a) ensuring that all parties can quickly assess the business performance impact of a reuse opportunity, and (b) encouraging high-value reuse opportunities by supplying value-based rewards to potential parties. In this paper we introduce the Value-Based Reuse Management approach and we describe key results on electronic designs that demonstrate its advantages. Our results indicate that Value-Based Reuse Management has the potential to significantly increase the success probability of high-value electronic design reuse.

  9. The economics of water reuse and implications for joint water quality-quantity management

    Science.gov (United States)

    Kuwayama, Y.

    2015-12-01

    Traditionally, economists have treated the management of water quality and water quantity as separate problems. However, there are some water management issues for which economic analysis requires the simultaneous consideration of water quality and quantity policies and outcomes. Water reuse, which has expanded significantly over the last several decades, is one of these issues. Analyzing the cost effectiveness and social welfare outcomes of adopting water reuse requires a joint water quality-quantity optimization framework because, at its most basic level, water reuse requires decision makers to consider (a) its potential for alleviating water scarcity, (b) the quality to which the water should be treated prior to reuse, and (c) the benefits of discharging less wastewater into the environment. In this project, we develop a theoretical model of water reuse management to illustrate how the availability of water reuse technologies and practices can lead to a departure from established rules in the water resource economics literature for the optimal allocation of freshwater and water pollution abatement. We also conduct an econometric analysis of a unique dataset of county-level water reuse from the state of Florida over the seventeen-year period between 1996 and 2012 in order to determine whether water quality or scarcity concerns drive greater adoption of water reuse practices.

  10. Methods for the cultural adaptation of a diabetes lifestyle intervention for Latinas: an illustrative project.

    Science.gov (United States)

    Osuna, Diego; Barrera, Manuel; Strycker, Lisa A; Toobert, Deborah J; Glasgow, Russell E; Geno, Cristy R; Almeida, Fabio; Perdomo, Malena; King, Diane; Doty, Alyssa Tinley

    2011-05-01

    Because Latinas experience a high prevalence of type 2 diabetes and its complications, there is an urgent need to reach them with interventions that promote healthful lifestyles. This article illustrates a sequential approach that took an effective multiple-risk-factor behavior-change program and adapted it for Latinas with type 2 diabetes. Adaptation stages include (a) information gathering from literature and focus groups, (b) preliminary adaptation design, and (c) preliminary adaptation test. In this third stage, a pilot study finds that participants were highly satisfied with the intervention and showed improvement across diverse outcomes. Key implications for applications include the importance of a model for guiding cultural adaptations, and the value of procedures for obtaining continuous feedback from staff and participants during the preliminary adaptation test.

  11. Comparison of adaptive statistical iterative and filtered back projection reconstruction techniques in brain CT

    International Nuclear Information System (INIS)

    Ren, Qingguo; Dewan, Sheilesh Kumar; Li, Ming; Li, Jianying; Mao, Dingbiao; Wang, Zhenglei; Hua, Yanqing

    2012-01-01

    Purpose: To compare image quality and visualization of normal structures and lesions in brain computed tomography (CT) with adaptive statistical iterative reconstruction (ASIR) and filtered back projection (FBP) reconstruction techniques in different X-ray tube current–time products. Materials and methods: In this IRB-approved prospective study, forty patients (nineteen men, twenty-one women; mean age 69.5 ± 11.2 years) received brain scan at different tube current–time products (300 and 200 mAs) in 64-section multi-detector CT (GE, Discovery CT750 HD). Images were reconstructed with FBP and four levels of ASIR-FBP blending. Two radiologists (please note that our hospital is renowned for its geriatric medicine department, and these two radiologists are more experienced in chronic cerebral vascular disease than in neoplastic disease, so this research did not contain cerebral tumors but as a discussion) assessed all the reconstructed images for visibility of normal structures, lesion conspicuity, image contrast and diagnostic confidence in a blinded and randomized manner. Volume CT dose index (CTDI vol ) and dose-length product (DLP) were recorded. All the data were analyzed by using SPSS 13.0 statistical analysis software. Results: There was no statistically significant difference between the image qualities at 200 mAs with 50% ASIR blending technique and 300 mAs with FBP technique (p > .05). While between the image qualities at 200 mAs with FBP and 300 mAs with FBP technique a statistically significant difference (p < .05) was found. Conclusion: ASIR provided same image quality and diagnostic ability in brain imaging with greater than 30% dose reduction compared with FBP reconstruction technique

  12. Comparison of adaptive statistical iterative and filtered back projection reconstruction techniques in brain CT

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Qingguo, E-mail: renqg83@163.com [Department of Radiology, Hua Dong Hospital of Fudan University, Shanghai 200040 (China); Dewan, Sheilesh Kumar, E-mail: sheilesh_d1@hotmail.com [Department of Geriatrics, Hua Dong Hospital of Fudan University, Shanghai 200040 (China); Li, Ming, E-mail: minli77@163.com [Department of Radiology, Hua Dong Hospital of Fudan University, Shanghai 200040 (China); Li, Jianying, E-mail: Jianying.Li@med.ge.com [CT Imaging Research Center, GE Healthcare China, Beijing (China); Mao, Dingbiao, E-mail: maodingbiao74@163.com [Department of Radiology, Hua Dong Hospital of Fudan University, Shanghai 200040 (China); Wang, Zhenglei, E-mail: Williswang_doc@yahoo.com.cn [Department of Radiology, Shanghai Electricity Hospital, Shanghai 200050 (China); Hua, Yanqing, E-mail: cjr.huayanqing@vip.163.com [Department of Radiology, Hua Dong Hospital of Fudan University, Shanghai 200040 (China)

    2012-10-15

    Purpose: To compare image quality and visualization of normal structures and lesions in brain computed tomography (CT) with adaptive statistical iterative reconstruction (ASIR) and filtered back projection (FBP) reconstruction techniques in different X-ray tube current–time products. Materials and methods: In this IRB-approved prospective study, forty patients (nineteen men, twenty-one women; mean age 69.5 ± 11.2 years) received brain scan at different tube current–time products (300 and 200 mAs) in 64-section multi-detector CT (GE, Discovery CT750 HD). Images were reconstructed with FBP and four levels of ASIR-FBP blending. Two radiologists (please note that our hospital is renowned for its geriatric medicine department, and these two radiologists are more experienced in chronic cerebral vascular disease than in neoplastic disease, so this research did not contain cerebral tumors but as a discussion) assessed all the reconstructed images for visibility of normal structures, lesion conspicuity, image contrast and diagnostic confidence in a blinded and randomized manner. Volume CT dose index (CTDI{sub vol}) and dose-length product (DLP) were recorded. All the data were analyzed by using SPSS 13.0 statistical analysis software. Results: There was no statistically significant difference between the image qualities at 200 mAs with 50% ASIR blending technique and 300 mAs with FBP technique (p > .05). While between the image qualities at 200 mAs with FBP and 300 mAs with FBP technique a statistically significant difference (p < .05) was found. Conclusion: ASIR provided same image quality and diagnostic ability in brain imaging with greater than 30% dose reduction compared with FBP reconstruction technique.

  13. ICT reuse in socio-economic enterprises

    International Nuclear Information System (INIS)

    Ongondo, F.O.; Williams, I.D.; Dietrich, J.; Carroll, C.

    2013-01-01

    Highlights: • We analyse ICT equipment reuse operations of socio-economic enterprises. • Most common ICT products dealt with are computers and related equipment. • In the UK in 2010, ∼143,750 appliances were reused. • Marketing and legislative difficulties are the common hurdles to reuse activities. • Socio-economic enterprises can significantly contribute to resource efficiency. - Abstract: In Europe, socio-economic enterprises such as charities, voluntary organisations and not-for-profit companies are involved in the repair, refurbishment and reuse of various products. This paper characterises and analyses the operations of socio-economic enterprises that are involved in the reuse of Information and Communication Technology (ICT) equipment. Using findings from a survey, the paper specifically analyses the reuse activities of socio-economic enterprises in the UK from which Europe-wide conclusions are drawn. The amount of ICT products handled by the reuse organisations is quantified and potential barriers and opportunities to their operations are analysed. By-products from reuse activities are discussed and recommendations to improve reuse activities are provided. The most common ICT products dealt with by socio-economic enterprises are computers and related equipment. In the UK in 2010, an estimated 143,750 appliances were reused. However, due to limitations in data, it is difficult to compare this number to the amount of new appliances that entered the UK market or the amount of waste electrical and electronic equipment generated in the same period. Difficulties in marketing products and numerous legislative requirements are the most common barriers to reuse operations. Despite various constraints, it is clear that organisations involved in reuse of ICT could contribute significantly to resource efficiency and a circular economy. It is suggested that clustering of their operations into “reuse parks” would enhance both their profile and their

  14. ICT reuse in socio-economic enterprises

    Energy Technology Data Exchange (ETDEWEB)

    Ongondo, F.O., E-mail: f.ongondo@soton.ac.uk [Centre for Environmental Sciences, Faculty of Engineering and the Environment, Lanchester Building, University of Southampton, University Rd., Highfield, Southampton, Hampshire SO17 1BJ (United Kingdom); Williams, I.D. [Centre for Environmental Sciences, Faculty of Engineering and the Environment, Lanchester Building, University of Southampton, University Rd., Highfield, Southampton, Hampshire SO17 1BJ (United Kingdom); Dietrich, J. [Technische Universität Berlin, Centre for Scientific Continuing Education and Cooperation, Cooperation and Consulting for Environmental Questions (kubus) FH10-1, Fraunhoferstraße 33-36, 10587 Berlin (Germany); Carroll, C. [Centre for Environmental Sciences, Faculty of Engineering and the Environment, Lanchester Building, University of Southampton, University Rd., Highfield, Southampton, Hampshire SO17 1BJ (United Kingdom)

    2013-12-15

    Highlights: • We analyse ICT equipment reuse operations of socio-economic enterprises. • Most common ICT products dealt with are computers and related equipment. • In the UK in 2010, ∼143,750 appliances were reused. • Marketing and legislative difficulties are the common hurdles to reuse activities. • Socio-economic enterprises can significantly contribute to resource efficiency. - Abstract: In Europe, socio-economic enterprises such as charities, voluntary organisations and not-for-profit companies are involved in the repair, refurbishment and reuse of various products. This paper characterises and analyses the operations of socio-economic enterprises that are involved in the reuse of Information and Communication Technology (ICT) equipment. Using findings from a survey, the paper specifically analyses the reuse activities of socio-economic enterprises in the UK from which Europe-wide conclusions are drawn. The amount of ICT products handled by the reuse organisations is quantified and potential barriers and opportunities to their operations are analysed. By-products from reuse activities are discussed and recommendations to improve reuse activities are provided. The most common ICT products dealt with by socio-economic enterprises are computers and related equipment. In the UK in 2010, an estimated 143,750 appliances were reused. However, due to limitations in data, it is difficult to compare this number to the amount of new appliances that entered the UK market or the amount of waste electrical and electronic equipment generated in the same period. Difficulties in marketing products and numerous legislative requirements are the most common barriers to reuse operations. Despite various constraints, it is clear that organisations involved in reuse of ICT could contribute significantly to resource efficiency and a circular economy. It is suggested that clustering of their operations into “reuse parks” would enhance both their profile and their

  15. Factors affecting reuse of wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Haraszti, L

    1981-01-01

    Changing the quality of circulating water, raising the effectiveness of sedimentation, examples of biological treatment of wastewater are presented. The necessity of continuing the studies on biological treatment of wastewater is demonstrated. It is considered useful to define the importance of KhPK and BP5 in each case. During biological treatment in ponds, to define the relation BPK5:N:P, research on conditions for nutrient removal must be done. To do this, as well as decrease the significance of KhPK, a mathematical model for defining the effectiveness of biological treatment of wastewater and consequently their reuse must be developed.

  16. Increasing productivity through Total Reuse Management (TRM)

    Science.gov (United States)

    Schuler, M. P.

    1991-01-01

    Total Reuse Management (TRM) is a new concept currently being promoted by the NASA Langley Software Engineering and Ada Lab (SEAL). It uses concepts similar to those promoted in Total Quality Management (TQM). Both technical and management personnel are continually encouraged to think in terms of reuse. Reuse is not something that is aimed for after a product is completed, but rather it is built into the product from inception through development. Lowering software development costs, reducing risk, and increasing code reliability are the more prominent goals of TRM. Procedures and methods used to adopt and apply TRM are described. Reuse is frequently thought of as only being applicable to code. However, reuse can apply to all products and all phases of the software life cycle. These products include management and quality assurance plans, designs, and testing procedures. Specific examples of successfully reused products are given and future goals are discussed.

  17. Fostering Intelligent Moderation in the Next Generation: Insights from Remida-Inspired Reuse Materials Education

    Science.gov (United States)

    Parnell, Will; Downs, Christine; Cullen, Julianne

    2017-01-01

    Ecologically minded leaders and early childhood teacher educators offer a culturally significant shiny fish project in their community as a way to launch an environmental-material reuse project. Questioning if environmental collapse is imminent, their project investigation of developing a locally relevant Remida Reggio-inspired center serves as…

  18. Software reuse example and challenges at NSIDC

    Science.gov (United States)

    Billingsley, B. W.; Brodzik, M.; Collins, J. A.

    2009-12-01

    NSIDC has created a new data discovery and access system, Searchlight, to provide users with the data they want in the format they want. NSIDC Searchlight supports discovery and access to disparate data types with on-the-fly reprojection, regridding and reformatting. Architected to both reuse open source systems and be reused itself, Searchlight reuses GDAL and Proj4 for manipulating data and format conversions, the netCDF Java library for creating netCDF output, MapServer and OpenLayers for defining spatial criteria and the JTS Topology Suite (JTS) in conjunction with Hibernate Spatial for database interaction and rich OGC-compliant spatial objects. The application reuses popular Java and Java Script libraries including Struts 2, Spring, JPA (Hibernate), Sitemesh, JFreeChart, JQuery, DOJO and a PostGIS PostgreSQL database. Future reuse of Searchlight components is supported at varying architecture levels, ranging from the database and model components to web services. We present the tools, libraries and programs that Searchlight has reused. We describe the architecture of Searchlight and explain the strategies deployed for reusing existing software and how Searchlight is built for reuse. We will discuss NSIDC reuse of the Searchlight components to support rapid development of new data delivery systems.

  19. Reuse of hydroponic waste solution.

    Science.gov (United States)

    Kumar, Ramasamy Rajesh; Cho, Jae Young

    2014-01-01

    Attaining sustainable agriculture is a key goal in many parts of the world. The increased environmental awareness and the ongoing attempts to execute agricultural practices that are economically feasible and environmentally safe promote the use of hydroponic cultivation. Hydroponics is a technology for growing plants in nutrient solutions with or without the use of artificial medium to provide mechanical support. Major problems for hydroponic cultivation are higher operational cost and the causing of pollution due to discharge of waste nutrient solution. The nutrient effluent released into the environment can have negative impacts on the surrounding ecosystems as well as the potential to contaminate the groundwater utilized by humans for drinking purposes. The reuse of non-recycled, nutrient-rich hydroponic waste solution for growing plants in greenhouses is the possible way to control environmental pollution. Many researchers have successfully grown several plant species in hydroponic waste solution with high yield. Hence, this review addresses the problems associated with the release of hydroponic waste solution into the environment and possible reuse of hydroponic waste solution as an alternative resource for agriculture development and to control environmental pollution.

  20. Development of Basic Adaptive Model of the Real Property Item as a Support System for the Development Project

    Directory of Open Access Journals (Sweden)

    Politi Violetta

    2017-01-01

    Full Text Available The article describes the method of the detailed description of the item, as a basic managed element of the real estate development project. A mathematical adaptive model of development, which can influence on right organizational-managerial decision-makings on the stage of pre-investment research, was proposed on the basis of consideration of the set of characteristics and diversified features of the item, as well as its ability to self-development. The result of the work can be used as the base model in the design of decision support system in the initiation of the development project.

  1. Using Dedal to share and reuse distributed engineering design information

    Science.gov (United States)

    Baya, Vinod; Baudin, Catherine; Mabogunje, Ade; Das, Aseem; Cannon, David M.; Leifer, Larry J.

    1994-01-01

    The overall goal of the project is to facilitate the reuse of previous design experience for the maintenance, repair and redesign of artifacts in the electromechanical engineering domain. An engineering team creates information in the form of meeting summaries, project memos, progress reports, engineering notes, spreadsheet calculations and CAD drawings. Design information captured in these media is difficult to reuse because the way design concepts are referred to evolve over the life of a project and because decisions, requirements and structure are interrelated but rarely explicitly linked. Based on protocol analysis of the information seeking behavior of designer's, we defined a language to describe the content and the form of design records and implemented this language in Dedal, a tool for indexing, modeling and retrieving design information. We first describe the approach to indexing and retrieval in Dedal. Next we describe ongoing work in extending Dedal's capabilities to a distributed environment by integrating it with World Wide Web. This will enable members of a design team who are not co-located to share and reuse information.

  2. Setting water quality criteria for agricultural water reuse purposes

    Directory of Open Access Journals (Sweden)

    K. Müller

    2017-06-01

    Full Text Available The use of reclaimed water for agricultural irrigation is practiced worldwide and will increase in the future. The definition of water quality limits is a useful instrument for the assessment of water quality regarding its suitability for irrigation purposes and the performance of wastewater treatment steps. This study elaborates water quality objectives for a water reuse project in a setting where national guidelines do not exist. Internationally established guidelines are therefore applied to the local context. Additional limits for turbidity, total suspended solids, biochemical and chemical oxygen demand, total phosphorus and potassium are suggested to meet the requirements of water reuse projects. Emphasis is put on water quality requirements prior to UV disinfection and nutrient requirements of cultivated crops. The presented values can be of assistance when monitoring reclaimed water quality. To facilitate the realization of water reuse projects, comprehensive and more detailed information, in particular on water quality requirements prior to disinfection steps, should be provided as well as regarding the protection of the irrigation infrastructure.

  3. Projection of temperature-related mortality due to cardiovascular disease in beijing under different climate change, population, and adaptation scenarios.

    Science.gov (United States)

    Zhang, Boya; Li, Guoxing; Ma, Yue; Pan, Xiaochuan

    2018-04-01

    Human health faces unprecedented challenges caused by climate change. Thus, studies of the effect of temperature change on total mortality have been conducted in numerous countries. However, few of those studies focused on temperature-related mortality due to cardiovascular disease (CVD) or considered future population changes and adaptation to climate change. We present herein a projection of temperature-related mortality due to CVD under different climate change, population, and adaptation scenarios in Beijing, a megacity in China. To this end, 19 global circulation models (GCMs), 3 representative concentration pathways (RCPs), 3 socioeconomic pathways, together with generalized linear models and distributed lag non-linear models, were used to project future temperature-related CVD mortality during periods centered around the years 2050 and 2070. The number of temperature-related CVD deaths in Beijing is projected to increase by 3.5-10.2% under different RCP scenarios compared with that during the baseline period. Using the same GCM, the future daily maximum temperatures projected using the RCP2.6, RCP4.5, and RCP8.5 scenarios showed a gradually increasing trend. When population change is considered, the annual rate of increase in temperature-related CVD deaths was up to fivefold greater than that under no-population-change scenarios. The decrease in the number of cold-related deaths did not compensate for the increase in that of heat-related deaths, leading to a general increase in the number of temperature-related deaths due to CVD in Beijing. In addition, adaptation to climate change may enhance rather than ameliorate the effect of climate change, as the increase in cold-related CVD mortality greater than the decrease in heat-related CVD mortality in the adaptation scenarios will result in an increase in the total number of temperature-related CVD mortalities. Copyright © 2018 Elsevier Inc. All rights reserved.

  4. An improved affine projection algorithm for active noise cancellation

    Science.gov (United States)

    Zhang, Congyan; Wang, Mingjiang; Han, Yufei; Sun, Yunzhuo

    2017-08-01

    Affine projection algorithm is a signal reuse algorithm, and it has a good convergence rate compared to other traditional adaptive filtering algorithm. There are two factors that affect the performance of the algorithm, which are step factor and the projection length. In the paper, we propose a new variable step size affine projection algorithm (VSS-APA). It dynamically changes the step size according to certain rules, so that it can get smaller steady-state error and faster convergence speed. Simulation results can prove that its performance is superior to the traditional affine projection algorithm and in the active noise control (ANC) applications, the new algorithm can get very good results.

  5. SEL Ada reuse analysis and representations

    Science.gov (United States)

    Kester, Rush

    1990-01-01

    Overall, it was revealed that the pattern of Ada reuse has evolved from initial reuse of utility components into reuse of generalized application architectures. Utility components were both domain-independent utilities, such as queues and stacks, and domain-specific utilities, such as those that implement spacecraft orbit and attitude mathematical functions and physics or astronomical models. The level of reuse was significantly increased with the development of a generalized telemetry simulator architecture. The use of Ada generics significantly increased the level of verbatum reuse, which is due to the ability, using Ada generics, to parameterize the aspects of design that are configurable during reuse. A key factor in implementing generalized architectures was the ability to use generic subprogram parameters to tailor parts of the algorithm embedded within the architecture. The use of object oriented design (in which objects model real world entities) significantly improved the modularity for reuse. Encapsulating into packages the data and operations associated with common real world entities creates natural building blocks for reuse.

  6. Spatially distinct response of rice yield to autonomous adaptation under the CMIP5 multi-model projections

    Science.gov (United States)

    Shin, Yonghee; Lee, Eun-Jeong; Im, Eun-Soon; Jung, Il-Won

    2017-02-01

    Rice ( Oryza sativa L.) is a very important staple crop, as it feeds more than half of the world's population. Numerous studies have focused on the negative impacts of climate change on rice production. However, there is little debate on which region of the world is more vulnerable to climate change and how adaptation to this change can mitigate the negative impacts on rice production. We investigated the impacts of climate change on rice yield, based on simulations combining a global crop model, M-GAZE, and Coupled Model Intercomparison Project Phase 5 (CMIP5) multi-model projections. Our focus was the impact of mitigating emission forcings (representative concentration pathway RCP 4.5 vs. RCP 8.5) and autonomous adaptation (i.e., changing crop variety and planting date) on rice yield. In general, our results showed that climate change due to anthropogenic warming leads to a significant reduction in rice yield. However, autonomous adaptation provides the potential to reduce the negative impact of global warming on rice yields in a spatially distinct manner. The adaptation was less beneficial for countries located at a low latitude (e.g., Cambodia, Thailand, Brazil) compared to mid-latitude countries (e.g., USA, China, Pakistan), as regional climates at the lower latitudes are already near the upper temperature thresholds for acceptable rice growth. These findings suggest that the socioeconomic effects from rice production in lowlatitude countries can be highly vulnerable to anthropogenic global warming. Therefore, these countries need to be accountable to develop transformative adaptation strategies, such as adopting (or developing) heat-tolerant varieties, and/or improve irrigation systems and fertilizer use efficiency.

  7. ICT reuse in socio-economic enterprises.

    Science.gov (United States)

    Ongondo, F O; Williams, I D; Dietrich, J; Carroll, C

    2013-12-01

    In Europe, socio-economic enterprises such as charities, voluntary organisations and not-for-profit companies are involved in the repair, refurbishment and reuse of various products. This paper characterises and analyses the operations of socio-economic enterprises that are involved in the reuse of Information and Communication Technology (ICT) equipment. Using findings from a survey, the paper specifically analyses the reuse activities of socio-economic enterprises in the U.K. from which Europe-wide conclusions are drawn. The amount of ICT products handled by the reuse organisations is quantified and potential barriers and opportunities to their operations are analysed. By-products from reuse activities are discussed and recommendations to improve reuse activities are provided. The most common ICT products dealt with by socio-economic enterprises are computers and related equipment. In the U.K. in 2010, an estimated 143,750 appliances were reused. However, due to limitations in data, it is difficult to compare this number to the amount of new appliances that entered the U.K. market or the amount of waste electrical and electronic equipment generated in the same period. Difficulties in marketing products and numerous legislative requirements are the most common barriers to reuse operations. Despite various constraints, it is clear that organisations involved in reuse of ICT could contribute significantly to resource efficiency and a circular economy. It is suggested that clustering of their operations into "reuse parks" would enhance both their profile and their products. Reuse parks would also improve consumer confidence in and subsequently sales of the products. Further, it is advocated that industrial networking opportunities for the exchange of by-products resulting from the organisations' activities should be investigated. The findings make two significant contributions to the current literature. One, they provide a detailed insight into the reuse operations

  8. Disturbance observer-based adaptive sliding mode hybrid projective synchronisation of identical fractional-order financial systems

    Science.gov (United States)

    Khan, Ayub; Tyagi, Arti

    2018-05-01

    In this paper, we have studied the hybrid projective synchronisation for incommensurate, integer and commensurate fractional-order financial systems with unknown disturbance. To tackle the problem of unknown bounded disturbance, fractional-order disturbance observer is designed to approximate the unknown disturbance. Further, we have introduced simple sliding mode surface and designed adaptive sliding mode controllers incorporating with the designed fractional-order disturbance observer to achieve a bounded hybrid projective synchronisation between two identical fractional-order financial model with different initial conditions. It is shown that the slave system with disturbance can be synchronised with the projection of the master system generated through state transformation. Simulation results are presented to ensure the validity and effectiveness of the proposed sliding mode control scheme in the presence of external bounded unknown disturbance. Also, synchronisation error for commensurate, integer and incommensurate fractional-order financial systems is studied in numerical simulation.

  9. Re-use of disposable coil dialysers

    International Nuclear Information System (INIS)

    Abbud Filho, M.

    1980-01-01

    Re-use of disposable dialysers has been in practice for over 16 years throughout the world but it still is a polemical subject. The main justification for it is the reduction of costs in the hemodialytic treatment. We evaluated the technique of re-use that we adopt by studying 33 patients who should re-utilize coil dialysers for 8 consecutive hemodialysis sessions. We investigated: 1) small and middle molecules clearances trough a radioisotopic method; 2) the integrity of the system regarding bacterial invasion; 3) the frequency of anti-N antibodies; 4) aspects of scanning electron microscopy (SEM) of dialysis membrane after re-use. We observed no changes in the dialysers performance during re-use. We conclude that the re-use of dialyzers is feasible, without risks for the patients, allowing marked reduction of costs, thus making possible to offer treatment to a larger number of uremic patients. (author)

  10. Automated Reuse of Scientific Subroutine Libraries through Deductive Synthesis

    Science.gov (United States)

    Lowry, Michael R.; Pressburger, Thomas; VanBaalen, Jeffrey; Roach, Steven

    1997-01-01

    Systematic software construction offers the potential of elevating software engineering from an art-form to an engineering discipline. The desired result is more predictable software development leading to better quality and more maintainable software. However, the overhead costs associated with the formalisms, mathematics, and methods of systematic software construction have largely precluded their adoption in real-world software development. In fact, many mainstream software development organizations, such as Microsoft, still maintain a predominantly oral culture for software development projects; which is far removed from a formalism-based culture for software development. An exception is the limited domain of safety-critical software, where the high-assuiance inherent in systematic software construction justifies the additional cost. We believe that systematic software construction will only be adopted by mainstream software development organization when the overhead costs have been greatly reduced. Two approaches to cost mitigation are reuse (amortizing costs over many applications) and automation. For the last four years, NASA Ames has funded the Amphion project, whose objective is to automate software reuse through techniques from systematic software construction. In particular, deductive program synthesis (i.e., program extraction from proofs) is used to derive a composition of software components (e.g., subroutines) that correctly implements a specification. The construction of reuse libraries of software components is the standard software engineering solution for improving software development productivity and quality.

  11. Looking through the Lens: Adapting and Modifying Photovoice Projects for Active Learning and Engagement in Biology

    OpenAIRE

    Karobi Moitra

    2016-01-01

    Photovoice projects traditionally include original visual imagery and minimal text to tell a powerful story. Photovoice student projects have been utilized in the health and social sciences to involve students with the local community and also in community-based projects to help at-risk youth call attention to their community problems, such as disease and drug use. The tool of the photovoice can be used in the biology classroom to engage students in the active learning process through communi...

  12. In-Depth Case Studies of Superfund Reuse

    Science.gov (United States)

    SRI’s in-depth case studies explore Superfund reuse stories from start to finish. Their purpose is to see what redevelopment strategies worked, acknowledge reuse barriers and understand how communities overcame the barriers to create new reuse outcomes.

  13. Climate Change Risk Management: CRE Adaptation Projects and the Risk Management Process

    Science.gov (United States)

    This document describes National Estuary Program partner projects that demonstrate how risk management can be successfully applied to address environmental challenges in our country’s coastal areas.

  14. Software development with C++ maximizing reuse with object technology

    CERN Document Server

    Nielsen, Kjell

    2014-01-01

    Software Development with C++: Maximizing Reuse with Object Technology is about software development and object-oriented technology (OT), with applications implemented in C++. The basis for any software development project of complex systems is the process, rather than an individual method, which simply supports the overall process. This book is not intended as a general, all-encompassing treatise on OT. The intent is to provide practical information that is directly applicable to a development project. Explicit guidelines are offered for the infusion of OT into the various development phases.

  15. The GULLS project: a comparison of vulnerabilities across selected ocean hotspots and implications for adaptation to global change.

    Science.gov (United States)

    Cochrane, K.; Hobday, A. J.; Aswani, S.; Byfield, V.; Dutra, L.; Gasalla, M.; Haward, M.; Paytan, A.; Pecl, G.; Plaganyi-Lloyd, E.; Popova, K.; Salim, S. S.; Savage, C.; Sauer, W.; van Putten, I. E.; Visser, N.; Team, T G

    2016-12-01

    The GULLS project, `Global learning for local solutions: Reducing vulnerability of marine-dependent coastal communities' has been underway since October 2014. The project has been investigating six regional `hotspots': marine areas experiencing rapid warming. These are south-east Australia, Brazil, India, Solomon Islands, South Africa, and the Mozambique Channel and Madagascar. Rapid warming could be expected to have social, cultural and economic impacts that could affect these countries in different ways and may already be doing so. GULLS has focused on contributing to assessing and reducing the vulnerability of coastal communities and other stakeholders dependent on marine resources and to facilitate adaptation to climate change and variability through an integrated and trans-disciplinary approach. It includes participants from Australia, Brazil, India, Madagascar, New Zealand, South Africa, the United Kingdom and the United States of America. The research programme has been divided into six inter-linked components: ocean models, biological and ecological sensitivity analyses, system models, social vulnerability, policy mapping, and communication and education. This presentation will provide a brief overview of each of these components and describe the benefits that have resulted from the collaborative and transdisciplinary approach of GULLS. Following the standard vulnerability elements of exposure, sensitivity and adaptive capacity, the vulnerabilities of coastal communities and other stakeholders dependent on marine resources in the five hotspots will be compared using a set of indicators derived and populated from results of the research programme. The implications of similarities and differences between the hotspots for adaptation planning and options will be described.

  16. Adapting the Survivor Game to Create a Group Learning Term Project in Business Finance

    Science.gov (United States)

    Campbell, Robert D.

    2017-01-01

    A large and growing body of research supports the view that the small-group learning structure can be an effective tool to enhance student performance and encourage innovative problem solving. This paper explains in detail how the framework of the popular television reality show Survivor has been adapted to form a vehicle for a college level group…

  17. Climate Change Adaptation Support for Transportation Practitioners: 2013 Volpe Center Innovation Challenge Project.

    Science.gov (United States)

    2015-09-30

    The nature of the U.S. transportation system requires that actions to adapt to climate change impacts occur primarily at the State and local levels. Federal agencies support State, regional, and local agencies and they work hard to provide frameworks...

  18. Reuse of assembly systems: a great ecological and economical potential for facility suppliers

    Science.gov (United States)

    Weule, Hartmut; Buchholz, Carsten

    2001-02-01

    In addition to the consumer goods, capital goods offer a great potential for ecological and economic optimization. In view of this fact the project WiMonDi (Re-Use of Assembly Systems as new Business Fields), started in September 1998, focuses a marketable Remanufacturing and Re-Use of modules and components of assembly systems by using technically and organizationally continuous concepts. The objective of the closed Facility-Management-System is to prolong the serviceable lifespan of assembly facilities through the organized dismantling, refurbishment and reconditioning of the assembly facilities as well as their components. Therefore, it is necessary to develop easible and methodical strategies to realize a workable Re-Use concept. Within the project the focus is based on the optimization of Re-Use-strategies - the direct Re-Use, the Re-Use including Refurbishment as well as Material Recycling. The decision for an optimal strategy depends on economical (e.g. residual value, cost/benefit of relevant processes, etc.), ecological (e.g. pollutant components /substances), etc.) and technical parameters (e.g. reliability, etc.). For the purpose to integrate the total cost-of-ownership of products or components, WiMonDi integrates the costs of the use of products as well as the Re-Use costs/benefits. To initiate the conception of new distribution and user models between the supplier and the user of assembly facilities the described approach is conducted in close cooperation between Industry and University.

  19. Ozone treatment of textile wastewaters for reuse.

    Science.gov (United States)

    Ciardelli, G; Capannelli, G; Bottino, A

    2001-01-01

    Treatment of textile wastewaters by means of an ozonation pilot plant are described. Wastewaters used were produced by a dyeing and finishing factory and were first treated in an active sludge plant and filtrated through sand. In the appropriate conditions very high colour removal (95-99%) was achieved and the effluent could be reused in production processes requiring water of high quality as dyeing yarns or light colorations. Even if the chemical oxygen demand of treated waters was still in a range (75-120 mg/l, a decrease of up to 60%) that was usually considered to be too high for recycling purposes, recycling experiments were successful. The economical viability of the techniques implementation was also demonstrated and the industrial plant is currently under realisation under an EU financed project. The paper considers also the possible improvement of ozone diffusion by means of membrane contactors realised in a second pilot plant, in order to further reduce operating costs of the technique. With respect to traditional systems, the gas/liquid contact surface is much higher being that of the membrane. Ozone at the interface is therefore immediately solubilized and potentially consumed with no additional resistance to the mass transfer.

  20. Finland's water resources and climate change. Effects and adaptation. Final report of the WaterAdapt-project; Suomen vesivarat ja ilmastonmuutos; vaikutukset ja muutoksiin sopeutuminen. WaterAdapt-projektin loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Veijalainen, N.; Jakkila, J.; Nurmi, T.; Vehvilaeinen, B.; Marttunen, M.; Aaltonen, J.

    2012-05-15

    In this research climate change impacts on hydrology, water resources and lake regulation were estimated in Finland. Changes in discharges and water levels from the reference period 1971-2000 to periods 2010-39 and 2040-69 were estimated for 15 watersheds based on different climate scenarios and simulations with a hydrological model, the Watershed Simulation and Forecasting System (WSFS). On ten lakes the impacts of hydrological changes caused by climate change for the different uses and state of the lakes were evaluated. In addition climate change impacts on ground water and floods were estimated. The research was carried out in the Finnish Environment Institute (SYKE) as part of WaterAdapt (Finland's water resources and climate change - Effects and adaptation) -project financed by the Ministry of agriculture and forestry. Based on the results of the WaterAdapt-project, climate change will significantly change the seasonal variation of river discharges and lake water levels. Spring snowmelt floods will decrease due to warmer winters especially in Southern and Central Finland. An earlier spring will caused decreases in summer water levels in many lakes and low water levels in late summer will become increasingly problematic in some lakes. Water levels and discharges during winter will increase significantly especially in Southern and Central Finland, since a larger proportion of precipitation will fall as rain and snow will melt more during winter. Different climate scenarios produce significantly different results, but the direction of change is similar in all the scenarios. Floods decrease in some parts of Finland due to decreases in snow storage, but according to most climate scenarios increases in precipitation will cause floods to increase in large central lakes and their outflow rivers in large watersheds. The results demonstrate that current regulation permits will become impractical in many lakes when the climate changes. Adaptation to climate changes

  1. Water Reuse in Brazilian Manufacturing Firms

    OpenAIRE

    José Féres; Arnaud Reynaud; Alban Thomas

    2015-01-01

    This paper examines the factors influencing water reuse in manufacturing firms and analyzes whether the structure of intake water demand differs between firms that adopt water reuse practices and those which do not. To this purpose, we estimate a two-stage econometric model based on a sample of 447 industrial facilities located in the Paraíba do Sul river basin. The first stage applies a probit model for the water reuse decision and the second stage employs an endogenous switching regression ...

  2. ADAPT Dataset

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Diagnostics and Prognostics Testbed (ADAPT) Project Lead: Scott Poll Subject Fault diagnosis in electrical power systems Description The Advanced...

  3. The software-cycle model for re-engineering and reuse

    Science.gov (United States)

    Bailey, John W.; Basili, Victor R.

    1992-01-01

    This paper reports on the progress of a study which will contribute to our ability to perform high-level, component-based programming by describing means to obtain useful components, methods for the configuration and integration of those components, and an underlying economic model of the costs and benefits associated with this approach to reuse. One goal of the study is to develop and demonstrate methods to recover reusable components from domain-specific software through a combination of tools, to perform the identification, extraction, and re-engineering of components, and domain experts, to direct the applications of those tools. A second goal of the study is to enable the reuse of those components by identifying techniques for configuring and recombining the re-engineered software. This component-recovery or software-cycle model addresses not only the selection and re-engineering of components, but also their recombination into new programs. Once a model of reuse activities has been developed, the quantification of the costs and benefits of various reuse options will enable the development of an adaptable economic model of reuse, which is the principal goal of the overall study. This paper reports on the conception of the software-cycle model and on several supporting techniques of software recovery, measurement, and reuse which will lead to the development of the desired economic model.

  4. An empirical analysis of ontology reuse in BioPortal.

    Science.gov (United States)

    Ochs, Christopher; Perl, Yehoshua; Geller, James; Arabandi, Sivaram; Tudorache, Tania; Musen, Mark A

    2017-07-01

    Biomedical ontologies often reuse content (i.e., classes and properties) from other ontologies. Content reuse enables a consistent representation of a domain and reusing content can save an ontology author significant time and effort. Prior studies have investigated the existence of reused terms among the ontologies in the NCBO BioPortal, but as of yet there has not been a study investigating how the ontologies in BioPortal utilize reused content in the modeling of their own content. In this study we investigate how 355 ontologies hosted in the NCBO BioPortal reuse content from other ontologies for the purposes of creating new ontology content. We identified 197 ontologies that reuse content. Among these ontologies, 108 utilize reused classes in the modeling of their own classes and 116 utilize reused properties in class restrictions. Current utilization of reuse and quality issues related to reuse are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Reuse of Hydrotreating Spent Catalyst

    International Nuclear Information System (INIS)

    Habib, A.M.; Menoufy, M.F.; Amhed, S.H.

    2004-01-01

    All hydro treating catalysts used in petroleum refining processes gradually lose activity through coking, poisoning by metal, sulfur or halides or lose surface area from sintering at high process temperatures. Waste hydrotreating catalyst, which have been used in re-refining of waste lube oil at Alexandria Petroleum Company (after 5 years lifetime) compared with the same fresh catalyst were used in the present work. Studies are conducted on partial extraction of the active metals of spent catalyst (Mo and Ni) using three leaching solvents,4% oxidized oxalic acid, 10% aqueous sodium hydroxide and 10% citric acid. The leaching experiments are conducting on the de coked extrude [un crushed] spent catalyst samples. These steps are carried out in order to rejuvenate the spent catalyst to be reused in other reactions. The results indicated that 4% oxidized oxalic acid leaching solution gave total metal removal 45.6 for de coked catalyst samples while NaOH gave 35% and citric acid gave 31.9 % The oxidized leaching agent was the most efficient leaching solvent to facilitate the metal removal, and the rejuvenated catalyst was characterized by the unchanged crystalline phase The rejuvenated catalyst was applied for hydrodesulfurization (HDS) of vacuum gas oil as a feedstock, under different hydrogen pressure 20-80 bar in order to compare its HDS activity

  6. DECONTAMINATION TECHNOLOGIES FOR FACILITY REUSE

    International Nuclear Information System (INIS)

    Bossart, Steven J.; Blair, Danielle M.

    2003-01-01

    As nuclear research and production facilities across the U.S. Department of Energy (DOE) nuclear weapons complex are slated for deactivation and decommissioning (D and D), there is a need to decontaminate some facilities for reuse for another mission or continued use for the same mission. Improved technologies available in the commercial sector and tested by the DOE can help solve the DOE's decontamination problems. Decontamination technologies include mechanical methods, such as shaving, scabbling, and blasting; application of chemicals; biological methods; and electrochemical techniques. Materials to be decontaminated are primarily concrete or metal. Concrete materials include walls, floors, ceilings, bio-shields, and fuel pools. Metallic materials include structural steel, valves, pipes, gloveboxes, reactors, and other equipment. Porous materials such as concrete can be contaminated throughout their structure, although contamination in concrete normally resides in the top quarter-inch below the surface. Metals are normally only contaminated on the surface. Contamination includes a variety of alpha, beta, and gamma-emitting radionuclides and can sometimes include heavy metals and organic contamination regulated by the Resource Conservation and Recovery Act (RCRA). This paper describes several advanced mechanical, chemical, and other methods to decontaminate structures, equipment, and materials

  7. Ensuring Success of Adaptive Control Research Through Project Lifecycle Risk Mitigation

    Science.gov (United States)

    Pavlock, Kate M.

    2011-01-01

    Lessons Learne: 1. Design-out unnecessary risk to prevent excessive mitigation management during flight. 2. Consider iterative checkouts to confirm or improve human factor characteristics. 3. Consider the total flight test profile to uncover unanticipated human-algorithm interactions. 4. Consider test card cadence as a metric to assess test readiness. 5. Full-scale flight test is critical to development, maturation, and acceptance of adaptive control laws for operational use.

  8. Digital Collections Are a Sprint, Not a Marathon: Adapting Scrum Project Management Techniques to Library Digital Initiatives

    Directory of Open Access Journals (Sweden)

    Michael Dulock

    2015-12-01

    Full Text Available This article describes a case study in which a small team from the digital initiatives group and metadata services department at the University of Colorado Boulder (CU-Boulder Libraries conducted a pilot of the Scrum project management framework. The pilot team organized digital initiatives work into short, fixed intervals called sprints—a key component of Scrum. Over a year of working in the modified framework yielded significant improvements to digital collection work, including increased production of digital objects and surrogate records, accelerated publication of digital collections, and an increase in the number of concurrent projects. Adoption of sprints has improved communication and cooperation among participants, reinforced teamwork, and enhanced their ability to adapt to shifting priorities.

  9. LO + EPSS = Just-in-Time Reuse of Content to Support Employee Performance

    Science.gov (United States)

    Nguyen, Frank; Hanzel, Matthew

    2007-01-01

    Those involved in training know that creating instructional materials can become a tedious, repetitive process. They also know that business conditions often require training interventions to be delivered in ways that are not ideally structured or timed. This article examines the notion that learning objects can be reused and adapted for…

  10. Towards a comprehensive framework for reuse: A reuse-enabling software evolution environment

    Science.gov (United States)

    Basili, V. R.; Rombach, H. D.

    1988-01-01

    Reuse of products, processes and knowledge will be the key to enable the software industry to achieve the dramatic improvement in productivity and quality required to satisfy the anticipated growing demand. Although experience shows that certain kinds of reuse can be successful, general success has been elusive. A software life-cycle technology which allows broad and extensive reuse could provide the means to achieving the desired order-of-magnitude improvements. The scope of a comprehensive framework for understanding, planning, evaluating and motivating reuse practices and the necessary research activities is outlined. As a first step towards such a framework, a reuse-enabling software evolution environment model is introduced which provides a basis for the effective recording of experience, the generalization and tailoring of experience, the formalization of experience, and the (re-)use of experience.

  11. Software Reuse in the Naval Open Architecture

    National Research Council Canada - National Science Library

    Greathouse, Carlus A

    2008-01-01

    This thesis describes a web-based continuous learning module (CLM) for use in introducing members of the Department of the Navy s acquisition community to software reuse in the context of Naval Open Architecture...

  12. Water brief-WDM & wastewater reuse

    International Development Research Centre (IDRC) Digital Library (Canada)

    aalfouns

    Wastewater Reuse for Water Demand Management in the Middle East and ... Among the substantial WDM tools in MENA is the use of wastewater to reduce the pressure on scarce freshwater .... recycled water to irrigate crops with associated ...

  13. the greywater reuse case of Jordan

    International Development Research Centre (IDRC) Digital Library (Canada)

    Fox Run Craftsmen

    2003-03-06

    Mar 6, 2003 ... new and creative methods and systems of dealing with wastewater reuse. .... and attended by 35 individuals representing 8 different agencies. .... Water and Irrigation calls for covering the operation and maintenance costs for.

  14. Public opinion on water reuse options

    International Nuclear Information System (INIS)

    Bruvold, W.H.

    1988-01-01

    Public policy on waste water reuse options must be informed by public opinion because it is the public who must pay the cost of developing the option and who will be served by the option in the future. For public policy on reuse, guidance for innovative reuse is not as simple as first believed. It seems that public opinion regarding actual community reuse options is affected by the linkage of several factors, including water conservation, health protection, treatment and distribution costs, and environmental enhancement. Probability sampling was used in 7 studies to select respondents who were queried regarding their opinions on various reclaimed water uses such as ranging from cooling tower water to full domestic use. These 7 are briefly reviewed

  15. Decontamination and reuse of ORGDP aluminum scrap

    International Nuclear Information System (INIS)

    Compere, A.L.; Griffith, W.L.; Hayden, H.W.; Wilson, D.F.

    1996-12-01

    The Gaseous Diffusion Plants, or GDPs, have significant amounts of a number of metals, including nickel, aluminum, copper, and steel. Aluminum was used extensively throughout the GDPs because of its excellent strength to weight ratios and good resistance to corrosion by UF 6 . This report is concerned with the recycle of aluminum stator and rotor blades from axial compressors. Most of the stator and rotor blades were made from 214-X aluminum casting alloy. Used compressor blades were contaminated with uranium both as a result of surface contamination and as an accumulation held in surface-connected voids inside of the blades. A variety of GDP studies were performed to evaluate the amounts of uranium retained in the blades; the volume, area, and location of voids in the blades; and connections between surface defects and voids. Based on experimental data on deposition, uranium content of the blades is 0.3%, or roughly 200 times the value expected from blade surface area. However, this value does correlate with estimated internal surface area and with lengthy deposition times. Based on a literature search, it appears that gaseous decontamination or melt refining using fluxes specific for uranium removal have the potential for removing internal contamination from aluminum blades. A melt refining process was used to recycle blades during the 1950s and 1960s. The process removed roughly one-third of the uranium from the blades. Blade cast from recycled aluminum appeared to perform as well as blades from virgin material. New melt refining and gaseous decontamination processes have been shown to provide substantially better decontamination of pure aluminum. If these techniques can be successfully adapted to treat aluminum 214-X alloy, internal and, possibly, external reuse of aluminum alloys may be possible

  16. Revisiting Reuse in Main Memory Database Systems

    OpenAIRE

    Dursun, Kayhan; Binnig, Carsten; Cetintemel, Ugur; Kraska, Tim

    2016-01-01

    Reusing intermediates in databases to speed-up analytical query processing has been studied in the past. Existing solutions typically require intermediate results of individual operators to be materialized into temporary tables to be considered for reuse in subsequent queries. However, these approaches are fundamentally ill-suited for use in modern main memory databases. The reason is that modern main memory DBMSs are typically limited by the bandwidth of the memory bus, thus query execution ...

  17. Beneficial Reuse of Produced and Flowback Water

    Science.gov (United States)

    Water reuse and recycling is a significant issue in the development of oil and gas shale plays in the United StatesDrilling operations – 60,000 to 650,000 gallons per wellHydraulic fracturing operations – 3 million to 5 million gallons per wellDefinition of produced water and flowback waterInteractions of water quality constituents as they relate to water reuse and recyclingTesting criteria in the laboratory and field operations

  18. Analyses of historical and projected climates to support climate adaptation in the northern Rocky Mountains: Chapter 4

    Science.gov (United States)

    Gross, John E.; Tercek, Michael; Guay, Kevin; Chang, Tony; Talbert, Marian; Rodman, Ann; Thoma, David; Jantz, Patrick; Morisette, Jeffrey T.

    2016-01-01

    Most of the western United States is experiencing the effects of rapid and directional climate change (Garfin et al. 2013). These effects, along with forecasts of profound changes in the future, provide strong motivation for resource managers to learn about and prepare for future changes. Climate adaptation plans are based on an understanding of historic climate variation and their effects on ecosystems and on forecasts of future climate trends. Frameworks for climate adaptation thus universally identify the importance of a summary of historical, current, and projected climates (Glick, Stein, and Edelson 2011; Cross et al. 2013; Stein et al. 2014). Trends in physical climate variables are usually the basis for evaluating the exposure component in vulnerability assessments. Thus, this chapter focuses on step 2 of the Climate-Smart Conservation framework (chap. 2): vulnerability assessment. We present analyses of historical and current observations of temperature, precipitation, and other key climate measurements to provide context and a baseline for interpreting the ecological impacts of projected climate changes.

  19. Reduced Wiener Chaos representation of random fields via basis adaptation and projection

    Energy Technology Data Exchange (ETDEWEB)

    Tsilifis, Panagiotis, E-mail: tsilifis@usc.edu [Department of Mathematics, University of Southern California, Los Angeles, CA 90089 (United States); Department of Civil Engineering, University of Southern California, Los Angeles, CA 90089 (United States); Ghanem, Roger G., E-mail: ghanem@usc.edu [Department of Civil Engineering, University of Southern California, Los Angeles, CA 90089 (United States)

    2017-07-15

    A new characterization of random fields appearing in physical models is presented that is based on their well-known Homogeneous Chaos expansions. We take advantage of the adaptation capabilities of these expansions where the core idea is to rotate the basis of the underlying Gaussian Hilbert space, in order to achieve reduced functional representations that concentrate the induced probability measure in a lower dimensional subspace. For a smooth family of rotations along the domain of interest, the uncorrelated Gaussian inputs are transformed into a Gaussian process, thus introducing a mesoscale that captures intermediate characteristics of the quantity of interest.

  20. Recent practices on wastewater reuse in Turkey.

    Science.gov (United States)

    Tanik, A; Ekdal, A; Germirli Babuna, F; Orhon, D

    2005-01-01

    Reuse of wastewater for irrigational purposes in agriculture has been a widely applied practice all around the world compared to such applications in industries. In most of the developing countries, high costs of wastewater treatment stimulate the direct reuse of raw or partly treated effluent in irrigation despite the socio-cultural objections in some countries regarding religious rituals towards consuming wastewater. In Turkey, reuse applications in agriculture have been in use by indirect application by means of withdrawing water from the downstream end of treatment plants. Such practices affected the deterioration of surface water resources due to the lack of water quality monitoring and control. However, more conscious and planned reuse activities in agriculture have recently started by the operation of urban wastewater treatment plants. Turkey does not face any severe water scarcity problems for the time being, but as the water resources show the signs of water quality deterioration it seems to be one of the priority issues in the near future. The industrial reuse activities are only at the research stage especially in industries consuming high amounts of water. In-plant control implementation is the preferred effort of minimizing water consumption in such industries. The current reuse activities are outlined in the article forming an example from a developing country.

  1. Moving out or living on a mound? Jointly planning a Dutch flood adaptation project

    NARCIS (Netherlands)

    Roth, D.; Winnubst, M.

    2014-01-01

    All over the world spatial flood risk management policies are on the rise. This paper analyses the planning process for the Overdiepse polder, a so-called “Room for the River” project in the Netherlands. After high water in the 1990s, the Dutch government changed its flood risk management policy.

  2. Extending the concept and modularization of project management maturity with adaptable, human and customer factors

    NARCIS (Netherlands)

    Beverly Pasian

    2014-01-01

    Purpose The conceptual and modularization of project management maturity models is based on the principle of process control. This research was designed to challenge these boundaries to reveal non-process factors. The paper aims to discuss these issues. Design/methodology/approach A multimethod

  3. Adaptation of Regional Representative Soil Project and Soil Judging for Cameroon

    Science.gov (United States)

    Che, Celestine Akuma

    2013-01-01

    Representative regional soils have agricultural, cultural, economic, environmental, and historical importance to Cameroon. Twenty seven regional representative soils have been identified in Cameroon. A set of laboratory exercises, assignments and exam questions have been developed utilizing the Regional Representative Soil Project (RRSP) that…

  4. Adapting to Change in a Master Level Real-World-Projects Capstone Course

    Science.gov (United States)

    Tappert, Charles C.; Stix, Allen

    2012-01-01

    Our mission of capstone computing courses for the past ten years has been to offer students experience with the development of real-world information technology projects. This experience has included both the hard and soft skills required for the work they could expect as industrial practitioners. Hard skills entail extending one's knowledge…

  5. Adapting the Water Erosion Prediction Project (WEPP) model for forest applications

    Science.gov (United States)

    Shuhui Dun; Joan Q. Wu; William J. Elliot; Peter R. Robichaud; Dennis C. Flanagan; James R. Frankenberger; Robert E. Brown; Arthur C. Xu

    2009-01-01

    There has been an increasing public concern over forest stream pollution by excessive sedimentation due to natural or human disturbances. Adequate erosion simulation tools are needed for sound management of forest resources. The Water Erosion Prediction Project (WEPP) watershed model has proved useful in forest applications where Hortonian flow is the major form of...

  6. Developing adaptive interventions for adolescent substance use treatment settings: protocol of an observational, mixed-methods project.

    Science.gov (United States)

    Grant, Sean; Agniel, Denis; Almirall, Daniel; Burkhart, Q; Hunter, Sarah B; McCaffrey, Daniel F; Pedersen, Eric R; Ramchand, Rajeev; Griffin, Beth Ann

    2017-12-19

    Over 1.6 million adolescents in the United States meet criteria for substance use disorders (SUDs). While there are promising treatments for SUDs, adolescents respond to these treatments differentially in part based on the setting in which treatments are delivered. One way to address such individualized response to treatment is through the development of adaptive interventions (AIs): sequences of decision rules for altering treatment based on an individual's needs. This protocol describes a project with the overarching goal of beginning the development of AIs that provide recommendations for altering the setting of an adolescent's substance use treatment. This project has three discrete aims: (1) explore the views of various stakeholders (parents, providers, policymakers, and researchers) on deciding the setting of substance use treatment for an adolescent based on individualized need, (2) generate hypotheses concerning candidate AIs, and (3) compare the relative effectiveness among candidate AIs and non-adaptive interventions commonly used in everyday practice. This project uses a mixed-methods approach. First, we will conduct an iterative stakeholder engagement process, using RAND's ExpertLens online system, to assess the importance of considering specific individual needs and clinical outcomes when deciding the setting for an adolescent's substance use treatment. Second, we will use results from the stakeholder engagement process to analyze an observational longitudinal data set of 15,656 adolescents in substance use treatment, supported by the Substance Abuse and Mental Health Services Administration, using the Global Appraisal of Individual Needs questionnaire. We will utilize methods based on Q-learning regression to generate hypotheses about candidate AIs. Third, we will use robust statistical methods that aim to appropriately handle casemix adjustment on a large number of covariates (marginal structural modeling and inverse probability of treatment weights

  7. MAD ADAPTIVE OPTICS IMAGING OF HIGH-LUMINOSITY QUASARS: A PILOT PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Liuzzo, E. [Osservatorio di Radioastronomia, INAF, via Gobetti 101, I-40129 Bologna (Italy); Falomo, R.; Paiano, S.; Baruffolo, A.; Farinato, J.; Moretti, A.; Ragazzoni, R. [Osservatorio Astronomico di Padova, INAF, vicolo dell’Osservatorio 5, I-35122 Padova (Italy); Treves, A. [Università dell’Insubria (Como) (Italy); Uslenghi, M. [INAF-IASF, via E. Bassini 15, I-20133 Milano (Italy); Arcidiacono, C.; Diolaiti, E.; Lombini, M. [Osservatorio Astronomico di Bologna, INAF, Bologna, Via Ranzani 1, I-40127 Bologna (Italy); Brast, R. [Dipartimento di Fisica e Astronomia, Università di Bologna, Via Irnerio, 46, I-40126, Bologna (Italy); Donaldson, R.; Kolb, J.; Marchetti, E.; Tordo, S., E-mail: liuzzo@ira.inaf.it [European Southern Observatory, Karl-Schwarschild-Strasse 2, D-85748 Garching bei München (Germany)

    2016-08-01

    We present near-IR images of five luminous quasars at z ∼ 2 and one at z ∼ 4 obtained with an experimental adaptive optics (AO) instrument at the European Southern Observatory Very Large Telescope. The observations are part of a program aimed at demonstrating the capabilities of multi-conjugated adaptive optics imaging combined with the use of natural guide stars for high spatial resolution studies on large telescopes. The observations were mostly obtained under poor seeing conditions but in two cases. In spite of these nonoptimal conditions, the resulting images of point sources have cores of FWHM ∼ 0.2 arcsec. We are able to characterize the host galaxy properties for two sources and set stringent upper limits to the galaxy luminosity for the others. We also report on the expected capabilities for investigating the host galaxies of distant quasars with AO systems coupled with future Extremely Large Telescopes. Detailed simulations show that it will be possible to characterize compact (2–3 kpc) quasar host galaxies for quasi-stellar objects at z = 2 with nucleus K -magnitude spanning from 15 to 20 (corresponding to absolute magnitude −31 to −26) and host galaxies that are 4 mag fainter than their nuclei.

  8. MAD Adaptive Optics Imaging of High-luminosity Quasars: A Pilot Project

    Science.gov (United States)

    Liuzzo, E.; Falomo, R.; Paiano, S.; Treves, A.; Uslenghi, M.; Arcidiacono, C.; Baruffolo, A.; Diolaiti, E.; Farinato, J.; Lombini, M.; Moretti, A.; Ragazzoni, R.; Brast, R.; Donaldson, R.; Kolb, J.; Marchetti, E.; Tordo, S.

    2016-08-01

    We present near-IR images of five luminous quasars at z ˜ 2 and one at z ˜ 4 obtained with an experimental adaptive optics (AO) instrument at the European Southern Observatory Very Large Telescope. The observations are part of a program aimed at demonstrating the capabilities of multi-conjugated adaptive optics imaging combined with the use of natural guide stars for high spatial resolution studies on large telescopes. The observations were mostly obtained under poor seeing conditions but in two cases. In spite of these nonoptimal conditions, the resulting images of point sources have cores of FWHM ˜ 0.2 arcsec. We are able to characterize the host galaxy properties for two sources and set stringent upper limits to the galaxy luminosity for the others. We also report on the expected capabilities for investigating the host galaxies of distant quasars with AO systems coupled with future Extremely Large Telescopes. Detailed simulations show that it will be possible to characterize compact (2-3 kpc) quasar host galaxies for quasi-stellar objects at z = 2 with nucleus K-magnitude spanning from 15 to 20 (corresponding to absolute magnitude -31 to -26) and host galaxies that are 4 mag fainter than their nuclei.

  9. Adapting the Consolidated Framework for Implementation Research to Create Organizational Readiness and Implementation Tools for Project ECHO.

    Science.gov (United States)

    Serhal, Eva; Arena, Amanda; Sockalingam, Sanjeev; Mohri, Linda; Crawford, Allison

    2018-03-01

    The Project Extension for Community Healthcare Outcomes (ECHO) model expands primary care provider (PCP) capacity to manage complex diseases by sharing knowledge, disseminating best practices, and building a community of practice. The model has expanded rapidly, with over 140 ECHO projects currently established globally. We have used validated implementation frameworks, such as Damschroder's (2009) Consolidated Framework for Implementation Research (CFIR) and Proctor's (2011) taxonomy of implementation outcomes, combined with implementation experience to (1) create a set of questions to assess organizational readiness and suitability of the ECHO model and (2) provide those who have determined ECHO is the correct model with a checklist to support successful implementation. A set of considerations was created, which adapted and consolidated CFIR constructs to create ECHO-specific organizational readiness questions, as well as a process guide for implementation. Each consideration was mapped onto Proctor's (2011) implementation outcomes, and questions relating to the constructs were developed and reviewed for clarity. The Preimplementation list included 20 questions; most questions fall within Proctor's (2001) implementation outcome domains of "Appropriateness" and "Acceptability." The Process Checklist is a 26-item checklist to help launch an ECHO project; items map onto the constructs of Planning, Engaging, Executing, Reflecting, and Evaluating. Given that fidelity to the ECHO model is associated with robust outcomes, effective implementation is critical. These tools will enable programs to work through key considerations to implement a successful Project ECHO. Next steps will include validation with a diverse sample of ECHO projects.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited

  10. Water Quality Control for Shrimp Pond Using Adaptive Neuro Fuzzy Inference System : The First Project

    Science.gov (United States)

    Umam, F.; Budiarto, H.

    2018-01-01

    Shrimp farming becomes the main commodity of society in Madura Island East Java Indonesia. Because of Madura island has a very extreme weather, farmers have difficulty in keeping the balance of pond water. As a consequence of this condition, there are some farmers experienced losses. In this study an adaptive control system was developed using ANFIS method to control pH balance (7.5-8.5), Temperature (25-31°C), water level (70-120 cm) and Dissolved Oxygen (4-7,5 ppm). Each parameter (pH, temperature, level and DO) is controlled separately but can work together. The output of the control system is in the form of pump activation which provides the antidote to the imbalance that occurs in pond water. The system is built with two modes at once, which are automatic mode and manual mode. The manual control interface based on android which is easy to use.

  11. Large scale applicability of a Fully Adaptive Non-Intrusive Spectral Projection technique: Sensitivity and uncertainty analysis of a transient

    International Nuclear Information System (INIS)

    Perkó, Zoltán; Lathouwers, Danny; Kloosterman, Jan Leen; Hagen, Tim van der

    2014-01-01

    Highlights: • Grid and basis adaptive Polynomial Chaos techniques are presented for S and U analysis. • Dimensionality reduction and incremental polynomial order reduce computational costs. • An unprotected loss of flow transient is investigated in a Gas Cooled Fast Reactor. • S and U analysis is performed with MC and adaptive PC methods, for 42 input parameters. • PC accurately estimates means, variances, PDFs, sensitivities and uncertainties. - Abstract: Since the early years of reactor physics the most prominent sensitivity and uncertainty (S and U) analysis methods in the nuclear community have been adjoint based techniques. While these are very effective for pure neutronics problems due to the linearity of the transport equation, they become complicated when coupled non-linear systems are involved. With the continuous increase in computational power such complicated multi-physics problems are becoming progressively tractable, hence affordable and easily applicable S and U analysis tools also have to be developed in parallel. For reactor physics problems for which adjoint methods are prohibitive Polynomial Chaos (PC) techniques offer an attractive alternative to traditional random sampling based approaches. At TU Delft such PC methods have been studied for a number of years and this paper presents a large scale application of our Fully Adaptive Non-Intrusive Spectral Projection (FANISP) algorithm for performing the sensitivity and uncertainty analysis of a Gas Cooled Fast Reactor (GFR) Unprotected Loss Of Flow (ULOF) transient. The transient was simulated using the Cathare 2 code system and a fully detailed model of the GFR2400 reactor design that was investigated in the European FP7 GoFastR project. Several sources of uncertainty were taken into account amounting to an unusually high number of stochastic input parameters (42) and numerous output quantities were investigated. The results show consistently good performance of the applied adaptive PC

  12. Adapting Coastal State Indicators to end-users: the iCoast Project

    Science.gov (United States)

    Demarchi, Alessandro; Isotta Cristofori, Elena; Gracia, Vicente; Sairouní, Abdel; García-León, Manuel; Cámaro, Walther; Facello, Anna

    2016-04-01

    The extraordinary development of the built environment and of the population densities in the coastal areas are making coastal communities highly exposed. The sea level rise induced by climate change will worsen this coastal vulnerability scenario and a considerable amount of people are expected to be threatened by coastal flooding in the future. Due to the increasing number of catastrophic events, and the consequent increased number of damages and people affected, over the last decades coastal hazard management has become a fundamental activity in order to improve the resilience of coastal community. In this scenario, iCoast (integrated COastal Alert SysTem) project has been founded to develop a tool able to address coastal risks caused by extreme waves and high sea water levels in European coastal areas. In the framework of iCoast Project, a set of Coastal State Indicators (CSIs) has been developed in order to improve the forecasting and the assessment of coastal risks. CSIs are indeed parameters able to provide end-users with an essential information about coastal hazards and related impacts. Within the iCoast Project, following a comprehensive literature review about existing indicators concerning coastal risks, a list of CSIs have been chosen as parameters that can be derived from the meteorological and the hydrodynamic modules. They include both physical variables used as trigger for meteorological and flood warnings from the majority of the operational National/Regional warning systems and further essential parameters, so called 'storm integrated' coastal-storm indicators, able to describe the physical processes that drive coastal damages, such as erosion, accumulation, flooding, destructions. Nowadays, it is generally acknowledged that communities are not homogenous and hence their different vulnerable groups might need different warnings. Generally, even existing national EWS in developed countries are often ineffective to issue targeted warnings for

  13. Projections, plans, policies and politics in Prince George: reflections on five years of climate change adaptation in a northern Canadian community

    Science.gov (United States)

    Picketts, I. M.; Dery, S. J.; Curry, J.

    2013-12-01

    The City of Prince George, in central British Columbia, Canada, has partnered with academics and collaborators for over five years to address climate change adaptation at the local level. The first phase of research involved conducting a detailed overview of past climate trends and future projections for the region using the outputs of GCMs and downscaled RCMs. This information was communicated to senior local staff and community members, and feedback was applied to create a detailed adaptation strategy for the City, which identified priority impacts and outlined potential strategies to address them at the local level. The top priority impacts for Prince George are forest changes, increased flooding, and impacts to transportation infrastructure. During a second implementation phase of the project, eight local initiatives were completed focusing on: incorporating adaptation into a local sustainability plan and land use plan; exploring impacts related to forests, flooding and transportation infrastructure; and assessing trends and projections in freeze-thaw cycles and heavy rainfall events. This presentation will outline the adaptation initiatives undertaken in the City of Prince George during the second phase of research, and evaluate their effectiveness through reflections from interviews with local planners, engineers, managers, community champions and politicians. The initiatives deemed to be most successful - and most likely to be implemented - focus on topics that: are of high public concern; have clear cost implications; incorporate adaptation into policy; and/or incorporate adaptation into an ongoing project. Outcomes highlight challenges local researchers, practitioners and leaders face as they strive to implement proactive adaptation measures in policy and practice without strong support from policy and professional practices, and with a paucity of successful case study examples to build upon. Outcomes also reveal challenges as municipalities strive to do

  14. Adaptive Reuse: Alternative to Vacant Schools. Kalamazoo: Bread and Roses.

    Science.gov (United States)

    Rapley, Frank E.

    1984-01-01

    A Michigan law allows school districts to make energy conservation improvements and pay for them with savings generated by lowered energy consumption. A 71-year-old school, now the Community Education Center of Kalamazoo, Michigan, also serves as the base for a centralized energy management system for the school district. (MLF)

  15. Experimental mobile water reuse; Unidade movel experimental em reuso de agua

    Energy Technology Data Exchange (ETDEWEB)

    Cunha, Maria de Fatima Rodrigues da; Santiago, Vania Maria Junqueira; Machado, Mara de Barros; Cerqueira, Ana Claudia Figueiras Pereira de; Florido, Priscilla Lopes; Iwane, Tsutomo; Coelho, Eloisia B.A.P.; Souza, Rodrigo Suhett de; Tomaz, Ailton Fonseca [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    The search for environmental excellence in PETROBRAS and the need to minimize water use dictated by Law 9433/97 led to corporate guidelines to promote initiatives for the effective management of water resources, triggering a series of actions and projects. The Center for Research and Development - CENPES has as a priority research lines enable the reduction of water consumption in the oil industry through the reuse of effluent. The Mobile Unit for Experimental Water Reuse is a pioneer project in the world, in its format and purpose, was developed by CENPES in partnership with E and P - Process Engineering Ltda. and with e participation of the managements of Refine, SMES and Engineering. The main objective support initiatives aimed at reuse deployments Units of Operations (refineries and terminals, for example), by defining the best route technology for water treatment and wastewater. The Mobile Unit is composed of two trucks with pilot scale equipment that can test up to 90 technological solutions for water treatment and reuse. The station can test spot, the Company's refinery, processes to remove solids, organic load removal, and processes aimed at polishing and demineralization, simulating the operating conditions specific to the different characteristics of water and wastewater, with view to producing high quality water-compatible reuse in cooling towers or steam generation. From these tests CENPES may indicate the best alternative technically and economically for water reuse in design for industrial facilities, reducing time and cost of testing pilots. The field of knowledge in water reuse is an important asset to the sustainability of the Oil and Gas industry. Sustainable use of water resources is a goal of permanent PETROBRAS. (author)

  16. Evaluation of Load Analysis Methods for NASAs GIII Adaptive Compliant Trailing Edge Project

    Science.gov (United States)

    Cruz, Josue; Miller, Eric J.

    2016-01-01

    The Air Force Research Laboratory (AFRL), NASA Armstrong Flight Research Center (AFRC), and FlexSys Inc. (Ann Arbor, Michigan) have collaborated to flight test the Adaptive Compliant Trailing Edge (ACTE) flaps. These flaps were installed on a Gulfstream Aerospace Corporation (GAC) GIII aircraft and tested at AFRC at various deflection angles over a range of flight conditions. External aerodynamic and inertial load analyses were conducted with the intention to ensure that the change in wing loads due to the deployed ACTE flap did not overload the existing baseline GIII wing box structure. The objective of this paper was to substantiate the analysis tools used for predicting wing loads at AFRC. Computational fluid dynamics (CFD) models and distributed mass inertial models were developed for predicting the loads on the wing. The analysis tools included TRANAIR (full potential) and CMARC (panel) models. Aerodynamic pressure data from the analysis codes were validated against static pressure port data collected in-flight. Combined results from the CFD predictions and the inertial load analysis were used to predict the normal force, bending moment, and torque loads on the wing. Wing loads obtained from calibrated strain gages installed on the wing were used for substantiation of the load prediction tools. The load predictions exhibited good agreement compared to the flight load results obtained from calibrated strain gage measurements.

  17. Cost-benefit evaluation of a decentralized water system for wastewater reuse and environmental protection.

    Science.gov (United States)

    Chen, R; Wang, X C

    2009-01-01

    This paper proposed a net benefit value (NBV) model for cost-benefit evaluation of wastewater treatment and reuse projects, and attention was mainly paid to decentralized systems which are drawing wide interests all over the world especially in the water-deficient countries and regions. In the NBV model, all the factors related to project costs are monetary ones which can be calculated by using traditional methods, while many of the factors related to project benefits are non-monetary ones which need sophisticated methods for monetization. In this regard, the authors elaborated several methods for monetization of the benefits from wastewater discharge reduction, local environment improvement, and human health protection. The proposed model and methods were applied for the cost-benefit evaluation of a decentralized water reclamation and reuse project in a newly developed residential area in Xi'an, China. The system with dual-pipe collection and grey water treatment and reuse was found to be economically ineligible (NBV > 0) when all the treated water is reused for artificial pond replenishment, gardening and other non-potable purposes by taking into account the benefit of water saving. As environmental benefits are further considered, the economic advantage of the project is more significant.

  18. An adaptive algorithm for performance assessment of construction project management with respect to resilience engineering and job security

    Directory of Open Access Journals (Sweden)

    P. Hashemi

    2018-01-01

    Full Text Available Construction sites are accident-prone locations and therefore safety management plays an im-portant role in these workplaces. This study presents an adaptive algorithm for performance as-sessment of project management with respect to resilience engineering and job security in a large construction site. The required data are collected using questionnaires in a large construction site. The presented algorithm is composed of radial basis function (RBF, artificial neural networks multi-layer perceptron (ANN-MLP, and statistical tests. The results indicate that preparedness, fault-tolerance, and flexibility are the most effective factors on overall efficiency. Moreover, job security and resilience engineering have similar statistical impacts on overall system efficiency. The results are verified and validated by the proposed algorithm.

  19. Innovative and adaptive technologies in decommissioning of nuclear facilities. Final report of a coordinated research project 2004-2008

    International Nuclear Information System (INIS)

    2008-10-01

    There are dozens of old reactors and other nuclear facilities worldwide that are either being actively dismantled or are candidates for decommissioning in the near term. A significant proportion of these facilities are situated in Member States or institutions that do not have adequate expertise and technologies for planning and implementing state of the art decommissioning projects. The technology selection process is critical in that regard. The main objective of the IAEA technical activities on decommissioning is to promote the exchange of lessons learned in order to improve the technologies, thereby contributing to successful planning and implementation of decommissioning. This should be achieved through a better understanding of the decision making process in technology comparison and selection and relevant issues affecting the entire decommissioning process. The specific objectives of the Coordinated Research Project (CRP) on Innovative and Adaptive Technologies in Decommissioning of Nuclear Facilities include the following general aspects: (a) To establish methodologies and data needs for developing concepts and approaches relevant to technology comparison and selection in decommissioning; (b) To improve and expand the database on applications and performance of various types of decommissioning technologies; (c) To address specific issues for individual decommissioning technologies and generate data relevant to their comparison and selection. It is also expected that this project, and in particular the papers collected in this TECDOC, will draw Member States' attention to the practicality and achievability of timely planning and implementation of decommissioning, especially for many smaller projects. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final research coordination meeting held in Rez, Czech Republic, 3-7 December 2007, and collected in this technical publication. Operating

  20. Adaptive Equalizer Using Selective Partial Update Algorithm and Selective Regressor Affine Projection Algorithm over Shallow Water Acoustic Channels

    Directory of Open Access Journals (Sweden)

    Masoumeh Soflaei

    2014-01-01

    Full Text Available One of the most important problems of reliable communications in shallow water channels is intersymbol interference (ISI which is due to scattering from surface and reflecting from bottom. Using adaptive equalizers in receiver is one of the best suggested ways for overcoming this problem. In this paper, we apply the family of selective regressor affine projection algorithms (SR-APA and the family of selective partial update APA (SPU-APA which have low computational complexity that is one of the important factors that influences adaptive equalizer performance. We apply experimental data from Strait of Hormuz for examining the efficiency of the proposed methods over shallow water channel. We observe that the values of the steady-state mean square error (MSE of SR-APA and SPU-APA decrease by 5.8 (dB and 5.5 (dB, respectively, in comparison with least mean square (LMS algorithm. Also the families of SPU-APA and SR-APA have better convergence speed than LMS type algorithm.

  1. Chaos control and generalized projective synchronization of heavy symmetric chaotic gyroscope systems via Gaussian radial basis adaptive variable structure control

    International Nuclear Information System (INIS)

    Farivar, Faezeh; Aliyari Shoorehdeli, Mahdi; Nekoui, Mohammad Ali; Teshnehlab, Mohammad

    2012-01-01

    Highlights: ► A systematic procedure for GPS of unknown heavy chaotic gyroscope systems. ► Proposed methods are based on Lyapunov stability theory. ► Without calculating Lyapunov exponents and Eigen values of the Jacobian matrix. ► Capable to extend for a variety of chaotic systems. ► Useful for practical applications in the future. - Abstract: This paper proposes the chaos control and the generalized projective synchronization methods for heavy symmetric gyroscope systems via Gaussian radial basis adaptive variable structure control. Because of the nonlinear terms of the gyroscope system, the system exhibits chaotic motions. Occasionally, the extreme sensitivity to initial states in a system operating in chaotic mode can be very destructive to the system because of unpredictable behavior. In order to improve the performance of a dynamic system or avoid the chaotic phenomena, it is necessary to control a chaotic system with a periodic motion beneficial for working with a particular condition. As chaotic signals are usually broadband and noise like, synchronized chaotic systems can be used as cipher generators for secure communication. This paper presents chaos synchronization of two identical chaotic motions of symmetric gyroscopes. In this paper, the switching surfaces are adopted to ensure the stability of the error dynamics in variable structure control. Using the neural variable structure control technique, control laws are established which guarantees the chaos control and the generalized projective synchronization of unknown gyroscope systems. In the neural variable structure control, Gaussian radial basis functions are utilized to on-line estimate the system dynamic functions. Also, the adaptation laws of the on-line estimator are derived in the sense of Lyapunov function. Thus, the unknown gyro systems can be guaranteed to be asymptotically stable. Also, the proposed method can achieve the control objectives. Numerical simulations are presented to

  2. Wastewater reuse. What can be learned from the Israel experience; Reutilizacion de aguas residuales. Que se puede aprender de la experiencia israeli

    Energy Technology Data Exchange (ETDEWEB)

    Juanico, M.

    2007-07-01

    In Israel, wastewater is defined as an integral part of the water resources of the country and massive water reuse has been performed for almost four decades. Today, reuse achieves 75% of the produced wastewater. The present paper analyzes the historical development of wastewater reuse in Israel, addressing main events, regulations, coexistence of projects of different sizes and characteristics, institutional organization, the contractual relationship between the urban and rural sectors, nutrients recycling, quality of the treated wastewater and the problem of salination of soils and aquifers. The paper gives an holistic and impartial description of the controversial issues that are presently discussed in the country regarding wastewater reuse. (Author) 42 refs.

  3. CO2 Capture and Reuse

    International Nuclear Information System (INIS)

    Thambimuthu, K.; Gupta, M.; Davison, J.

    2003-01-01

    CO2 capture and storage including its utilization or reuse presents an opportunity to achieve deep reductions in greenhouse gas emissions from fossil energy use. The development and deployment of this option could significantly assist in meeting a future goal of achieving stabilization of the presently rising atmospheric concentration of greenhouse gases. CO2 capture from process streams is an established concept that has achieved industrial practice. Examples of current applications include the use of primarily, solvent based capture technologies for the recovery of pure CO2 streams for chemical synthesis, for utilization as a food additive, for use as a miscible agent in enhanced oil recovery operations and removal of CO2 as an undesired contaminant from gaseous process streams for the production of fuel gases such as hydrogen and methane. In these applications, the technologies deployed for CO2 capture have focused on gas separation from high purity, high pressure streams and in reducing (or oxygen deficient) environments, where the energy penalties and cost for capture are moderately low. However, application of the same capture technologies for large scale abatement of greenhouse gas emissions from fossil fuel use poses significant challenges in achieving (at comparably low energy penalty and cost) gas separation in large volume, dilute concentration and/or low pressure flue gas streams. This paper will focus on a review of existing commercial methods of CO2 capture and the technology stretch, process integration and energy system pathways needed for their large scale deployment in fossil fueled processes. The assessment of potential capture technologies for the latter purpose will also be based on published literature data that are both 'transparent' and 'systematic' in their evaluation of the overall cost and energy penalties of CO2 capture. In view of the of the fact that many of the existing commercial processes for CO2 capture have seen applications in

  4. Dose reduction in chest CT: Comparison of the adaptive iterative dose reduction 3D, adaptive iterative dose reduction, and filtered back projection reconstruction techniques

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Yoshitake, E-mail: yamada@rad.med.keio.ac.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Jinzaki, Masahiro, E-mail: jinzaki@rad.med.keio.ac.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Hosokawa, Takahiro, E-mail: hosokawa@rad.med.keio.ac.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Tanami, Yutaka, E-mail: tanami@rad.med.keio.ac.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Sugiura, Hiroaki, E-mail: hsugiura@rad.med.keio.ac.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Abe, Takayuki, E-mail: tabe@z5.keio.jp [Center for Clinical Research, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan); Kuribayashi, Sachio, E-mail: skuribay@a5.keio.jp [Department of Diagnostic Radiology, Keio University School of Medicine, 35 Shinanomachi, Shinjuku-ku, Tokyo 160-8582 (Japan)

    2012-12-15

    Objectives: To assess the effectiveness of adaptive iterative dose reduction (AIDR) and AIDR 3D in improving the image quality in low-dose chest CT (LDCT). Materials and methods: Fifty patients underwent standard-dose chest CT (SDCT) and LDCT simultaneously, performed under automatic exposure control with noise index of 19 and 38 (for a 2-mm slice thickness), respectively. The SDCT images were reconstructed with filtered back projection (SDCT-FBP images), and the LDCT images with FBP, AIDR and AIDR 3D (LDCT-FBP, LDCT-AIDR and LDCT-AIDR 3D images, respectively). On all the 200 lung and 200 mediastinal image series, objective image noise and signal-to-noise ratio (SNR) were measured in several regions, and two blinded radiologists independently assessed the subjective image quality. Wilcoxon's signed rank sum test with Bonferroni's correction was used for the statistical analyses. Results: The mean dose reduction in LDCT was 64.2% as compared with the dose in SDCT. LDCT-AIDR 3D images showed significantly reduced objective noise and significantly increased SNR in all regions as compared to the SDCT-FBP, LDCT-FBP and LDCT-AIDR images (all, P ≤ 0.003). In all assessments of the image quality, LDCT-AIDR 3D images were superior to LDCT-AIDR and LDCT-FBP images. The overall diagnostic acceptability of both the lung and mediastinal LDCT-AIDR 3D images was comparable to that of the lung and mediastinal SDCT-FBP images. Conclusions: AIDR 3D is superior to AIDR. Intra-individual comparisons between SDCT and LDCT suggest that AIDR 3D allows a 64.2% reduction of the radiation dose as compared to SDCT, by substantially reducing the objective image noise and increasing the SNR, while maintaining the overall diagnostic acceptability.

  5. Herzberg, Hygiene and the Motivation to Reuse: Towards a Three-Factor Theory to Explain Motivation to Share and Use OER

    Science.gov (United States)

    Pegler, Chris

    2012-01-01

    The list of barriers and enablers that influence the use of open educational resources (OER) is extensive. Factors and influences relating to reuse may have been noted within projects, operating within a short time span, or within specific conditions which limit generalizability. Evidence of reuse in practice has often emerged as isolated examples…

  6. Disposal and re-use of TENORM - legal limitations and obstacles

    International Nuclear Information System (INIS)

    Weiss, D.; Ettenhuber, E.

    2004-01-01

    While implementing EURATOM guideline 96/29 in the German legislation, in June of 2001 an essential pre-condition was created for re-use or disposal of TENORM. An essential progress has been achieved allowing to re-use TENORM or to dump it together with other residues and waste, if the specific activity does not exceed the limits defined in the radiation protection ordinance (StrlSchV). Otherwise, if the specified limits in terms of concentration or radiation dose are exceeded, than these materials must remain under radiological protection. A practical application of the new German regulation turns out to be difficult especially for disposal together with other waste and for re-use as backfilling material in mines taking into account problems arising from adaptation of the respective legislation on radiation protection, soil protection, waste management and shipment of dangerous goods. The report tackles obstacles for re-use and disposal of TENORM together with garbage and toxic waste arising from the new legislation. Otherwise, proposals will be given how obstacles of selected options for re-use and disposal can be overcome. (orig.)

  7. A Study into the Motivation of Knowledge Workers: Using an adapted version of the MOCC model of motivation to explain the motivational tendencies of project managers and engineers

    OpenAIRE

    Hammond, Matthew

    2012-01-01

    There is a general need across organisations to better understand the motivation of knowledge workers. Based on our own empirical findings, research into early and contemporary motivation theories and use of Sharp et al.’s (2009) Motivators, Outcomes, Context, and Characteristics (MOCC) motivational model we adapted our own model. Through adapting the content of the model but keeping the framework intact, we were able to explain the various aspects of motivation in project management and engi...

  8. Health diplomacy the adaptation of global health interventions to local needs in sub-Saharan Africa and Thailand: Evaluating findings from Project Accept (HPTN 043

    Directory of Open Access Journals (Sweden)

    Kevany Sebastian

    2012-06-01

    Full Text Available Abstract Background Study-based global health interventions, especially those that are conducted on an international or multi-site basis, frequently require site-specific adaptations in order to (1 respond to socio-cultural differences in risk determinants, (2 to make interventions more relevant to target population needs, and (3 in recognition of ‘global health diplomacy' issues. We report on the adaptations development, approval and implementation process from the Project Accept voluntary counseling and testing, community mobilization and post-test support services intervention. Methods We reviewed all relevant documentation collected during the study intervention period (e.g. monthly progress reports; bi-annual steering committee presentations and conducted a series of semi-structured interviews with project directors and between 12 and 23 field staff at each study site in South Africa, Zimbabwe, Thailand and Tanzania during 2009. Respondents were asked to describe (1 the adaptations development and approval process and (2 the most successful site-specific adaptations from the perspective of facilitating intervention implementation. Results Across sites, proposed adaptations were identified by field staff and submitted to project directors for review on a formally planned basis. The cross-site intervention sub-committee then ensured fidelity to the study protocol before approval. Successfully-implemented adaptations included: intervention delivery adaptations (e.g. development of tailored counseling messages for immigrant labour groups in South Africa political, environmental and infrastructural adaptations (e.g. use of local community centers as VCT venues in Zimbabwe; religious adaptations (e.g. dividing clients by gender in Muslim areas of Tanzania; economic adaptations (e.g. co-provision of income generating skills classes in Zimbabwe; epidemiological adaptations (e.g. provision of ‘youth-friendly’ services in South Africa, Zimbabwe

  9. Joint Applications Pilot of the National Climate Predictions and Projections Platform and the North Central Climate Science Center: Delivering climate projections on regional scales to support adaptation planning

    Science.gov (United States)

    Ray, A. J.; Ojima, D. S.; Morisette, J. T.

    2012-12-01

    The DOI North Central Climate Science Center (NC CSC) and the NOAA/NCAR National Climate Predictions and Projections (NCPP) Platform and have initiated a joint pilot study to collaboratively explore the "best available climate information" to support key land management questions and how to provide this information. NCPP's mission is to support state of the art approaches to develop and deliver comprehensive regional climate information and facilitate its use in decision making and adaptation planning. This presentation will describe the evolving joint pilot as a tangible, real-world demonstration of linkages between climate science, ecosystem science and resource management. Our joint pilot is developing a deliberate, ongoing interaction to prototype how NCPP will work with CSCs to develop and deliver needed climate information products, including translational information to support climate data understanding and use. This pilot also will build capacity in the North Central CSC by working with NCPP to use climate information used as input to ecological modeling. We will discuss lessons to date on developing and delivering needed climate information products based on this strategic partnership. Four projects have been funded to collaborate to incorporate climate information as part of an ecological modeling project, which in turn will address key DOI stakeholder priorities in the region: Riparian Corridors: Projecting climate change effects on cottonwood and willow seed dispersal phenology, flood timing, and seedling recruitment in western riparian forests. Sage Grouse & Habitats: Integrating climate and biological data into land management decision models to assess species and habitat vulnerability Grasslands & Forests: Projecting future effects of land management, natural disturbance, and CO2 on woody encroachment in the Northern Great Plains The value of climate information: Supporting management decisions in the Plains and Prairie Potholes LCC. NCCSC's role in

  10. [Fighting cholera in shanty-town. Successful experience of a Quebec project adapted to Peru].

    Science.gov (United States)

    Fréchette, L; Peralta, M

    1994-12-01

    Originally designed in Quebec, the MOI project was a collaboration between two professors of social work from Quebec and two members of the Peruvian NGO called SUR in Villa de Salvador, one of poorest slum areas on the outskirts of Lima. The approach is founded on the notion that the body is the primary instrument through which a person can interact with the world around him or her, and that the physical and mental health of an individual exists within the context of healthy conditions of life that must include at least a basic social and health infrastructure as well as healthy hygiene practices on the part of individuals, families and the local community. Preschool children (ages 4-6), study a different part of the body and its proper care each week through classroom observation games. Parents' help is requested to modify unhealthy conditions, at the same time to enrich the children's experience and to mobilize the community to improve health conditions. During the 1991 cholera epidemic, not a single case was counted in the experimental district, despite its clearly socio-economically impoverished status, and despite the fact that the Ministry of Health recorded 86,650 cases in the Lima-Callao district, accounting for about 40% of the total number of cases in the Peru. The prior work made it easier to explain how cholera is spread and what special new measures needed to be taken in addition to the hygiene habits already taught.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. The significance of 'hierarchy' in a research project on adoption and adaptation.

    Science.gov (United States)

    Mander, R

    1999-06-01

    In the course of phenomenological research project focusing on the midwife's care of the mother who relinquishes her baby for adoption, hierarchy emerged repeatedly as a significant theme. This concept manifested itself both methodologically as well as thematically. In methodological terms, hierarchy first became apparent during the planning phase in the selection of the research design: at this point it took the form of the distinction between quantitative and qualitative research design. In the course of applying for research access the same attitudes re-emerged in the gatekeepers' responses to the research design which had been chose. Later, during the field work, hierarchy appeared in the course of the interviews, in the form of the unequal balance of power between the interviewer and the informant. Specific tactics were required to overcome the likelihood of hierarchy affecting the data at this stage. Eventually this concept was raised by the informants, who included both relinquishing mothers an midwives, and became a major theme. The informants' use of hierarchy to explain the unselfishness of relinquishment proved to be one of a number of strategies which facilitated coping either with the experience of relinquishment or with caring for a women going through that experience. The conclusion which emerges is that hierarchy features in many aspects of life. While it may be beneficial when applied to certain situations to facilitate coping, in other circumstances it may be less than positive.

  12. Towards re-use of knowledge in the concept stage of development

    NARCIS (Netherlands)

    Smallenburg, K.; Halman, J.I.M.; Mal, van H.H.

    1996-01-01

    A framework for specifying the intended result of a product development project is introduced in the paper. This framework has been developed for the concept stage and facilitates the establishment and re-use of acquired knowledge. In this way, core capabilities naturally grow stronger with each

  13. INST7150 - Advanced Topics in Learning Object Design and Reuse, Fall 2005

    OpenAIRE

    Wiley, David

    2005-01-01

    This course is designed to help you understand and apply advanced topics in the design, creation, and reuse of learning objects. The course is structured around a practical, hands-on project using learning objects, intermingled with readings and discussion on a variety of topics.

  14. Quality and safety aspects of reusable plastic food packaging materials : influence of reuse on intrinsic properties

    NARCIS (Netherlands)

    Jetten, J.; Kruijf, N. de

    2002-01-01

    The aim of the project was to develop a comprehensive package of quality assurance criteria for use by the industry and by regulatory authorities to ensure the quality and safety-in-use (sensory, microbiological and chemical safety) of reused plastics for food packaging. The paper describes the

  15. Reuse of drainage water model : calculation method of drainage water and watertable depth

    NARCIS (Netherlands)

    Roest, C.W.J.; Rijtema, P.E.; Abdel Khalik, M.A.

    1986-01-01

    The main objective of the project is to assist the Ministry of Irrigation in Egypt in the planning of future watermanagement strategies incorporating reuse of drainage water practices. In order to achieve this main objective a comprehensive measurement programme has been initiated and a mathematical

  16. Reuse and Securing of Mining Waste : Need of the hour

    Science.gov (United States)

    Mehta, Neha; Dino, Giovanna; Ajmone-Marsan, Franco; De Luca, Domenico Antonio

    2016-04-01

    agricultural soils can depend on Bio-accumulation factor, Translocation factor of heavy metals, species of plant grown and type of the natural biota of the surroundings and effect of different exposure routes. This also leads to the fact that more research is required in this area. Accordingly the same problem statement was chosen as part of a PhD research Project. The PhD research is part of REMEDIATE project (A Marie Sklodowska-Curie Action Initial Training Network for Improved decision making in contaminated land site investigation and risk assessment, Grant Agreement No. 643087). In this project the researcher will select a mining site in Italy to find possible solutions to the environmental impact of mining waste collected there. The project will focus on 1) physical and chemical characterization of waste 2)environmental risk assessment study of the mining waste 3) impact of mining waste on water bodies and soil 4) to discover possible routes of reuse and recovery of minerals from the waste. Thus project focuses on environmental sustainability of mining waste reuse and clean up. Keywords : Mining waste ; environmental risk assessment ;reuse and recovery.

  17. Potable Water Reuse: What Are the Microbiological Risks?

    Science.gov (United States)

    Nappier, Sharon P; Soller, Jeffrey A; Eftim, Sorina E

    2018-06-01

    With the increasing interest in recycling water for potable reuse purposes, it is important to understand the microbial risks associated with potable reuse. This review focuses on potable reuse systems that use high-level treatment and de facto reuse scenarios that include a quantifiable wastewater effluent component. In this article, we summarize the published human health studies related to potable reuse, including both epidemiology studies and quantitative microbial risk assessments (QMRA). Overall, there have been relatively few health-based studies evaluating the microbial risks associated with potable reuse. Several microbial risk assessments focused on risks associated with unplanned (or de facto) reuse, while others evaluated planned potable reuse, such as indirect potable reuse (IPR) or direct potable reuse (DPR). The reported QMRA-based risks for planned potable reuse varied substantially, indicating there is a need for risk assessors to use consistent input parameters and transparent assumptions, so that risk results are easily translated across studies. However, the current results overall indicate that predicted risks associated with planned potable reuse scenarios may be lower than those for de facto reuse scenarios. Overall, there is a clear need to carefully consider water treatment train choices when wastewater is a component of the drinking water supply (whether de facto, IPR, or DPR). More data from full-scale water treatment facilities would be helpful to quantify levels of viruses in raw sewage and reductions across unit treatment processes for both culturable and molecular detection methods.

  18. Supporting Effective Data Sharing and Re-Use: What Can Funders Really Do?

    Science.gov (United States)

    Uhle, M. E.

    2017-12-01

    Most research funding agencies have data policies that grantees must abide to receive financial support for projects and activities. These policies however are typically not uniform, can be inconsistent and in some cases, can be contradictory preventing national and international collaboration. In addition, disciplinary divisions within a single agency may implement agency policy differently. These barriers are particularly profound for multi, inter- and/or transdisciplinary research needed to address many global environmental challenges. Recognizing the crucial role of open and effective data and information exchange to support effective international transdisciplinary research for understanding, mitigating and adapting to global environmental change, the Belmont Forum adopted Open Data Policy and Principles in 2015. This policy signals a commitment by these 25 funders to increase access to scientific data, a step widely recognized as essential to making informed decisions in the face of rapid changes affecting the Earth's environment. Through collaborative research actions and community driven activities, the Belmont Forum seeks to widen access to data, and promote its long-term preservation in global change research; encourage re-use of existing data; help improve data management and exploitation; coordinate and integrate disparate organizational and technical elements; fill critical global e-infrastructure gaps; share best practices; and foster new data literacy.

  19. Repository Evaluation of Software Reuse

    OpenAIRE

    Banker, Rajiv D.; Kauffman, Robert J.; Zweig, Dani

    1993-01-01

    The article of record as published may be found at: 10.1109/32.223805 Center for Digital Economy Research Stem School of Business Working Paper IS-93-28, Replaces: Working Paper IS-93-1 Working Paper Series STERN IS-93-28 Working Paper series: STERN IS-93-28 The traditional unit of analysis and control for software managers is the software project, and subsequently the resulting application system. Today, with the emerging ca- pabilities of computer-aided software engineering ...

  20. A General Algorithm for Reusing Krylov Subspace Information. I. Unsteady Navier-Stokes

    Science.gov (United States)

    Carpenter, Mark H.; Vuik, C.; Lucas, Peter; vanGijzen, Martin; Bijl, Hester

    2010-01-01

    A general algorithm is developed that reuses available information to accelerate the iterative convergence of linear systems with multiple right-hand sides A x = b (sup i), which are commonly encountered in steady or unsteady simulations of nonlinear equations. The algorithm is based on the classical GMRES algorithm with eigenvector enrichment but also includes a Galerkin projection preprocessing step and several novel Krylov subspace reuse strategies. The new approach is applied to a set of test problems, including an unsteady turbulent airfoil, and is shown in some cases to provide significant improvement in computational efficiency relative to baseline approaches.

  1. Coastal Adaptation Planning for Sea Level Rise and Extremes: A Global Model for Adaptation Decision-making at the Local Level Given Uncertain Climate Projections

    Science.gov (United States)

    Turner, D.

    2014-12-01

    Understanding the potential economic and physical impacts of climate change on coastal resources involves evaluating a number of distinct adaptive responses. This paper presents a tool for such analysis, a spatially-disaggregated optimization model for adaptation to sea level rise (SLR) and storm surge, the Coastal Impact and Adaptation Model (CIAM). This decision-making framework fills a gap between very detailed studies of specific locations and overly aggregate global analyses. While CIAM is global in scope, the optimal adaptation strategy is determined at the local level, evaluating over 12,000 coastal segments as described in the DIVA database (Vafeidis et al. 2006). The decision to pursue a given adaptation measure depends on local socioeconomic factors like income, population, and land values and how they develop over time, relative to the magnitude of potential coastal impacts, based on geophysical attributes like inundation zones and storm surge. For example, the model's decision to protect or retreat considers the costs of constructing and maintaining coastal defenses versus those of relocating people and capital to minimize damages from land inundation and coastal storms. Uncertain storm surge events are modeled with a generalized extreme value distribution calibrated to data on local surge extremes. Adaptation is optimized for the near-term outlook, in an "act then learn then act" framework that is repeated over the model time horizon. This framework allows the adaptation strategy to be flexibly updated, reflecting the process of iterative risk management. CIAM provides new estimates of the economic costs of SLR; moreover, these detailed results can be compactly represented in a set of adaptation and damage functions for use in integrated assessment models. Alongside the optimal result, CIAM evaluates suboptimal cases and finds that global costs could increase by an order of magnitude, illustrating the importance of adaptive capacity and coastal policy.

  2. Can Data be Organized for Science and Reuse?

    Science.gov (United States)

    Habermann, T.; Shasharina, S.; Jelenak, A.; Fillmore, D. W.

    2015-12-01

    The Data Life Cycle is an important general concept for thinking about data collection, management, and preservation practices across the geophysical scientific data community. The cycle generally spans the scientific process from ideation, through experimental design, observation collection, data analysis and visualization, publication, archive, distributions and eventual reuse. During the cycle, the data may change through new analyses, presentations, and responsible parties, but, historically, the format and organization of the data have generally remained the same. Data collected as a time series at a point remains as a time series and data collected/calculated as grids remains as grids. BIP is BIP and BSQ is BSQ. In fact, in many large data centers, the native format remains sacrosanct and, in the scientific community, reformatting is avoided because of fear of losing information or introducing data quality problems and irreproducible results. This traditional approach has worked well in areas where data are collected and used for a single purpose throughout the life cycle and domains where comparisons across different data sets are rare and problematic due to conflicting data organizational structures or incomplete documentation. This is not the world we live in today. Reuse for unexpected purposes and data (and model) comparisons are becoming increasingly common (e.g. climate model / observation comparisons). Data sets are preserved for future global investigators that may be unaware of the original project or purpose of the data. Also, it is becoming more common for data to be restructured and reformatted for particular problem or to support a flexible web service. Unfortunately, many of these efforts do not preserve the metadata that, hopefully, accompanies the data in the original format. In this presentation we will discuss alternative approaches to data management that will facilitate data reuse across teams and disciplines.

  3. Creating by Reusing Learning Design Solutions

    NARCIS (Netherlands)

    Hernández-Leo, Davinia; Harrer, Andreas; Dodero, Juan Manuel; Asensio-Pérez, Juan; Burgos, Daniel

    2006-01-01

    Hernández-Leo, D., Harrer, A., Dodero, J. M., Asension-Pérez, J. I., & Burgos, D. (2006). Creating by reusing Learning Design solutions. Proceedings of 8th Simposo Internacional de Informática Educativa, León, Spain: IEEE Technical Committee on Learning Technology. Retrieved October 3rd, 2006, from

  4. The Three Rs: Reduce, Reuse, Recycle.

    Science.gov (United States)

    Science Activities, 1991

    1991-01-01

    A student hand-out for a recycling unit defines the terms reduce, recycle, and reuse as they relate to solid waste management. Presents the characteristics of recyclable items such as yard wastes, metals, glass, and paper. Lists organizations through which more information about recycling can be obtained. (MCO)

  5. What is Type-Safe Code Reuse

    DEFF Research Database (Denmark)

    Schwartzbach, Michael Ignatieff; Palsberg, Jens

    1991-01-01

    Subclassing is reuse of class definitions. It is usually tied to the use of class names, thus relying on the order in which the particular classes in a program are created. This is a burden, however, both when programming and in theoretical studies. This paper presents a structural notion of subc...

  6. Constructed Wetlands for Greywater Recycle and Reuse

    Science.gov (United States)

    Concern over dwindling water supplies for urban areas as well as environmental degradation from existing urban water systems has motivated research into more resilient and sustainable water supply strategies. Greywater reuse has been suggested as a way to diversify local water su...

  7. Asset Reuse of Images from a Repository

    Science.gov (United States)

    Herman, Deirdre

    2014-01-01

    According to Markus's theory of reuse, when digital repositories are deployed to collect and distribute organizational assets, they supposedly help ensure accountability, extend information exchange, and improve productivity. Such repositories require a large investment due to the continuing costs of hardware, software, user licenses, training,…

  8. MINIMIZATION OF RETRIEVAL TIME DURING SOFTWARE REUSE ...

    African Journals Online (AJOL)

    eobe

    Versions. Label in repository. No. of classifiers in class diagrams. No. of sequence diagrams. No. of messages in all sequence diagrams. Java Game. Maker. (JGM) game engine for developing java games. 1.9, 2.1, 2.2, ... to programming, code-based sizing metrics will be used to estimate reuse effort. The formula employed.

  9. Current Opinion and Controversies of Dialyser Reuse

    Directory of Open Access Journals (Sweden)

    Brown Colin

    2001-01-01

    Full Text Available Reuse of dialysers has been an integral part of hemodialysis since its inception. Over the past decade, reuse has increased significantly in many countries, most notably in the United States, while vanishing entirely in some other countries, such as Portugal and France. In the United States, which is most widely used as an example because of the large amount of data available, the mortality of dialysis patients has steadily decreased even as reuse has increased. This improvement is probably the result of a complex of factors including understanding the role of comorbidity, treatment unit characteristics, barriers to adequate dialysis, nutrition, anemia, high flux dialysis and dialyser membrane improvements and the desired dialysis dose. Reuse provides a significant economic benefit that allows the use of more efficient and expensive larger biocompatible synthetic membranes to provide high-quality dialysis in the face of cost inflation, limited medical resources and fixed reimbursement. Rather than being legitimized by clinical practice alone, reprocessing, supported by clinical studies, allows the provision of superior treatment to more patients safely and economically. Recent reports concerning dialyser reprocessing have centered not only on morbidity and mortality, but also on questions of the specific effects of different germicides on various types of dialyser membranes (e.g., cellulosic, synthetic, high-flux, etc. and on the possible role of dialyser reprocessing in the transmission of hepatitis C.

  10. Reuse of drainage water from irrigated areas

    NARCIS (Netherlands)

    Willardson, L.S.; Boels, D.; Smedema, L.K.

    1997-01-01

    Increasing competition for water of good quality and the expectation that at least half of the required increase in food production in the near-future decades must come from the world's irrigated land requires to produce more food by converting more of the diverted water into food. Reuse of the

  11. Code Reuse and Modularity in Python

    Directory of Open Access Journals (Sweden)

    William J. Turkel

    2012-07-01

    Full Text Available Computer programs can become long, unwieldy and confusing without special mechanisms for managing complexity. This lesson will show you how to reuse parts of your code by writing Functions and break your programs into Modules, in order to keep everything concise and easier to debug. Being able to remove a single dysfunctional module can save time and effort.

  12. PUBLIC DOMAIN PROTECTION. USES AND REUSES OF PUBLIC DOMAIN WORKS

    Directory of Open Access Journals (Sweden)

    Monica Adriana LUPAȘCU

    2015-07-01

    Full Text Available This study tries to highlight the necessity of an awareness of the right of access to the public domain, particularly using the example of works whose protection period has expired, as well as the ones which the law considers to be excluded from protection. Such works are used not only by large libraries from around the world, but also by rights holders, via different means of use, including incorporations into original works or adaptations. However, the reuse that follows these uses often only remains at the level of concept, as the notion of the public’s right of access to public domain works is not substantiated, nor is the notion of the correct or legal use of such works.

  13. CASE-BASED PRODUCT CONFIGURATION AND REUSE IN MASS CUSTOMIZATION

    Institute of Scientific and Technical Information of China (English)

    Wang Shiwei; Tan Jianrong; Zhang Shuyou; Wang Xin; He Chenqi

    2004-01-01

    The increasing complexity and size of configuration knowledge bases requires the provision of advanced methods supporting the development of the actual configuration process and design reuse.A new framework to find a feasible and practical product configuration method is presented in mass customization.The basic idea of the approach is to integrate case-based reasoning (CBR) with a constraint satisfaction problem(CSP).The similarity measure between a crisp and range is also given,which is common in case retrieves.Based on the configuration model,a product platform and customer needs,case adaptation is carried out with the repair-based algorithm.Lastly,the methodology in the elevator configuration design domain is tested.

  14. Towards More Comprehensive Projections of Urban Heat-Related Mortality: Estimates for New York City Under Multiple Population, Adaptation, and Climate Scenarios

    Science.gov (United States)

    Petkova, Elisaveta P.; Vink, Jan K.; Horton, Radley M.; Gasparrini, Antonio; Bader, Daniel A.; Francis, Joe D.; Kinney, Patrick L.

    2016-01-01

    High temperatures have substantial impacts on mortality and, with growing concerns about climate change, numerous studies have developed projections of future heat-related deaths around the world. Projections of temperature-related mortality are often limited by insufficient information necessary to formulate hypotheses about population sensitivity to high temperatures and future demographics. This study has derived projections of temperature-related mortality in New York City by taking into account future patterns of adaptation or demographic change, both of which can have profound influences on future health burdens. We adopt a novel approach to modeling heat adaptation by incorporating an analysis of the observed population response to heat in New York City over the course of eight decades. This approach projects heat-related mortality until the end of the 21st century based on observed trends in adaptation over a substantial portion of the 20th century. In addition, we incorporate a range of new scenarios for population change until the end of the 21st century. We then estimate future heat-related deaths in New York City by combining the changing temperature-mortality relationship and population scenarios with downscaled temperature projections from the 33 global climate models (GCMs) and two Representative Concentration Pathways (RCPs).The median number of projected annual heat-related deaths across the 33 GCMs varied greatly by RCP and adaptation and population change scenario, ranging from 167 to 3331 in the 2080s compared to 638 heat-related deaths annually between 2000 and 2006.These findings provide a more complete picture of the range of potential future heat-related mortality risks across the 21st century in New York, and highlight the importance of both demographic change and adaptation responses in modifying future risks.

  15. An overview of reclaimed water reuse in China.

    Science.gov (United States)

    Yi, Lili; Jiao, Wentao; Chen, Xiaoning; Chen, Weiping

    2011-01-01

    China is facing severe water problems including scarcity and pollution which are now becoming key factors restricting developments. Creating an alternative water resource and reducing effluent discharges, water reuse has been recognized as an integral part of water and wastewater management scheme in China. The government has launched nationwide efforts to optimize the benefits of utilizing reclaimed water. This article reviewed the water reuse activities in China, including: (1) application history and current status; (2) potentials of reclaimed water reuse; (3) laws, policies and regulations governing reclaimed water reuse; (4) risks associated with reclaimed water reuse; (5) issues in reclaimed water reuse. Reclaimed water in Beijing and Tianjin were given as examples. Suggestions for improving the efficiencies of reusing urban wastewater were advanced. Being the largest user of reclaimed wastewater in the world, China's experience can benefit the development of water reuse in other regions.

  16. Minimization of Retrieval Time During Software Reuse | Salami ...

    African Journals Online (AJOL)

    Minimization of Retrieval Time During Software Reuse. ... Retrieval of relevant software from the repository during software reuse can be time consuming if the repository contains many ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  17. Presentation: Overview of Water Reuse Challenges and Opportunities

    Science.gov (United States)

    This presentation, Overview of Water Reuse Challenges and Opportunities, was given at the STAR Human and Ecological Health Impacts Associated with Water Reuse and Conservation Practices Kick-off Meeting and Webinar held on Oct. 26-27, 2016.

  18. Qualitative monitoring of a treated wastewater reuse extensive ...

    African Journals Online (AJOL)

    Qualitative monitoring of a treated wastewater reuse extensive distribution system: ... region where 80 % of the freshwater resources are consumed by agriculture. ... the reuse limits for orchard irrigation, being 80 mg/ℓ and 25 mg/ℓ respectively.

  19. Wastewater and sludge reuse in agriculture

    Science.gov (United States)

    Kalavrouziotis, Ioannis

    2016-04-01

    The reuse of Municipal wastewaters (TMWW) for irrigation of crops, and of sludge for the amendment of soils, is a multidimensional disposal practice aiming at: (i) minimizing the environmental problems by releasing the pressure exerted by these two inputs on the environment, (ii) providing the growing plants with water and nutrients and (ii) improving soil fertility and productivity, The research work conducted in our University in relation to accomplishing a safe reuse has been focused on the study of the following aspects of reuse: (i) heavy metal accumulation in soils and plants with emphasis on their edible part. This aspect has been studied by conducting a series of experiments aiming at the study of the accumulation of heavy metals in soils, and in plant roots, stalks, leaves and fruits. The conclusions drawn so far with regard to the order of accumulation of heavy metals are: Roots>leaves>stalks>fruits ( edible parts) (ii) interactions between heavy metals, plant nutrients and soil chemical and physical properties. After the examinations of hundreds of interactions, and the development of a quantification of the interactions contribution, it was found that considerable quantities of heavy metals and nutrients are contributed to the soil and to various plant parts , emphasizing the important role of the elemental interactions in plants.(iii) assessment of soil pollution with heavy metals based on pollution indices, Three pollution Indices have been established by our research team and were proposed internationally for application in actual practice for the prediction of soil pollution due to long term reuse of wastewater and sludge. These indices are as follows: (a) Elemental pollution Index (EPI), (b) Heavy Metal Load (HML), and (c) Total Concentration Factor (TCF) and (iv) construction of a computer program for the control of the reuse of TMWW and sludge, and forecasting soil pollution due to accumulation of heavy metal by means of pollution indices.

  20. Recycle and reuse of radioactive scrap metals within the department of energy

    International Nuclear Information System (INIS)

    Adams, V.; Murphie, W.; Gresalfi, M.

    2000-01-01

    The United States Department of Energy (DOE) National Center of Excellence for Metals Recycle (NMR) is pursuing recycle and reuse alternatives to burial of radioactive scrap metal. This approach is being implemented in a safe and environmentally sound manner, while significantly lowering dis-positioning cost and accelerating cleanup activities. This paper will define the NMR's success to date in promoting safe and cost effective recycle and reuse strategies for DOE's excess metals, through the use of case studies. The paper will also present actual volumes of metal moved by DOE into restricted and unrestricted uses since 1997. In addition, this paper will discuss the principle underlying the Three Building Decommissioning and Decontamination (D and D) Project in Oak Ridge, Tennessee. In January 2000, the Secretary of Energy placed a moratorium on the unrestricted release of volumetrically contaminated metals from the DOE sites. Pursuant to that moratorium, the Secretary also established a ''Re-Use and Recycling Task Force'' to conduct a review of DOE policies regarding the management and release of all materials for recycle and reuse from DOE facilities. This task force was charged to develop a set of recommendations to ensure the protection of public health and the environment, openness and public trust, and fiscal responsibility. This paper will present an overview of the DOE's present range of recycle and reuse alternatives to disposal, as practiced by the NMR, and discuss the policy and issues associated with the task force mission. (authors)

  1. Evaluating the Interests of Different Stakeholders in Beijing Wastewater Reuse Systems for Sustainable Urban Water Management

    Directory of Open Access Journals (Sweden)

    Xiao Liang

    2016-10-01

    Full Text Available Whether water systems can be operated successfully and sustainably is influenced by the attitudes and willingness of stakeholders involved in the management of such systems. This study quantitatively evaluates the interests of different stakeholders in wastewater reuse systems in Beijing. Such interests comprise economic, environmental, and social effects induced by the wastewater reuse systems. The study considers four main stakeholders in Beijing, namely the Municipal Administration Committee (MAC, Municipal Environmental Protection Bureau (MEPB, plant managers, and users. Cost benefit analysis is conducted to determine the aforementioned interests separately from the perspectives of the various stakeholders. The results reveal that not all stakeholders’ interests in the wastewater reuse systems in Beijing are satisfied. From the perspectives of both the MAC and MEPB, the evaluation results indicate that both decentralized and centralized wastewater reuse systems are economically feasible. However, from the viewpoints of plant managers and users, the results reveal that only the centralized wastewater reuse systems are economically feasible, whereas the decentralized systems are not. The failure to satisfy the interests of plant managers and users may be a major reason for the interrupted operation of the decentralized systems in Beijing. The study demonstrates that successful and sustainable development of a new water project necessitates satisfying the interests of all stakeholders.

  2. Savannah River Site Surplus Facilities Available for Reuse

    International Nuclear Information System (INIS)

    Clarke, R.M.; Owens, M.B.; Lentz, D.W.

    1995-01-01

    The purpose of this document is to provide a current, centralized list of Savannah River Site facilities, which are surplus and available for reuse. These surplus facilities may be made available for other DOE site missions, commercial economic development reuse, or other governmental reuse. SRS procedures also require that before new construction can be approved, available surplus facilities are screened for possible reuse in lieu of the proposed new construction

  3. How Governance Regimes Shape the Implementation of Water Reuse Schemes

    OpenAIRE

    Frijns, Jos; Smith, Heather M.; Brouwer, Stijn; Garnett, Kenisha; Elelman, Richard; Jeffrey, Paul

    2016-01-01

    The governance dimensions of water reuse scheme development and operation, such as policies and regulatory frameworks, and public involvement and stakeholder collaboration, can serve to both facilitate and constrain wider adoption of water reuse practices. This paper explores the significance and underlying structure of the key governance challenges facing the water reuse sector in Europe. It presents empirical evidence from interviews and focus group sessions conducted at four water reuse sc...

  4. A Best Practices Notebook for Disaster Risk Reduction and Climate Change Adaptation: Guidance and Insights for Policy and Practice from the CATALYST Project

    NARCIS (Netherlands)

    Hare, M.; Bers, van C.; Mysiak, J.; Calliari, E.; Haque, A.; Warner, K.; Yuzva, K.; Zissener, M.; Jaspers, A.M.J.; Timmerman, J.G.

    2014-01-01

    This publication, A Best Practices Notebook for Disaster Risk Reduction and Climate Change Adaptation: Guidance and Insights for Policy and Practice from the CATALYST Project is one of two main CATALYST knowledge products that focus on the transformative approaches and measures that can support

  5. Beneficial reuse `96: The fourth annual conference on the recycle and reuse of radioactive scrap metal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    From October 22-24, 1996 the University of Tennessee`s Energy, Environment and Resources Center and the Oak Ridge National Laboratory`s Center for Risk Management cosponsored Beneficial Reuse `96: The Fourth Annual Conference on the Recycle and Reuse of Radioactive Materials. Along with the traditional focus on radioactive scrap metals, this year`s conference included a wide range of topics pertaining to naturally occurring radioactive materials (NORM), and contaminated concrete reuse applications. As with previous Beneficial Reuse conferences, the primary goal of this year`s conference was to bring together stakeholder representatives for presentations, panel sessions and workshops on significant waste minimization issues surrounding the recycle and reuse of contaminated metals and other materials. A wide range of industry, government and public stakeholder groups participated in this year`s conference. An international presence from Canada, Germany and Korea helped to make Beneficial Reuse `96 a well-rounded affair. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  6. Development of waste water reuse water system for power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, K K; Kim, D H; Weon, D Y; Yoon, S W; Song, H R [Korea Electric Power Research Institute, Taejeon (Korea, Republic of)

    1998-12-31

    1. Status of waste water discharge at power plants 2. Present status of waste water reuse at power plants 3. Scheme of waste water reuse at power plants 4. Standardization of optimum system for waste water reuse at power plants 5. Establishment of low cost zero discharge system for waste water 6. Waste water treatment technology of chemical cleaning. (author). 132 figs., 72 tabs.

  7. Patterns of Learning Object Reuse in the Connexions Repository

    Science.gov (United States)

    Duncan, S. M.

    2009-01-01

    Since the term "learning object" was first published, there has been either an explicit or implicit expectation of reuse. There has also been a lot of speculation about why learning objects are, or are not, reused. This study quantitatively examined the actual amount and type of learning object use, to include reuse, modification, and translation,…

  8. Conceptual Match as a Determinant of Reference Reuse in Dialogue

    Science.gov (United States)

    Knutsen, Dominique; Le Bigot, Ludovic

    2017-01-01

    As speakers interact, they add references to their common ground, which they can then reuse to facilitate listener comprehension. However, all references are not equally likely to be reused. The purpose of this study was to shed light on how the speakers' conceptualizations of the referents under discussion affect reuse (along with a generation…

  9. Development of waste water reuse water system for power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, K.K.; Kim, D.H.; Weon, D.Y.; Yoon, S.W.; Song, H.R. [Korea Electric Power Research Institute, Taejeon (Korea, Republic of)

    1997-12-31

    1. Status of waste water discharge at power plants 2. Present status of waste water reuse at power plants 3. Scheme of waste water reuse at power plants 4. Standardization of optimum system for waste water reuse at power plants 5. Establishment of low cost zero discharge system for waste water 6. Waste water treatment technology of chemical cleaning. (author). 132 figs., 72 tabs.

  10. Submerged membrane bioreactor for domestic wastewater treatment and reuse

    International Nuclear Information System (INIS)

    Feki; Firas; Jraou, Mouna; Loukil, Slim; Kchaou, Sonia; Sayadi, Sami; Arnolt, Tom

    2009-01-01

    The Mediterranean basin (and particularly North African countries) is one of the poorest regions in the world in terms of water resources. In Tunisia, treated municipal wastewater is becoming one of the main alternative sources of water. Indeed, in 2007, 99 municipal wastewater treatment plants (WWTP) has treated a quantity of 215 millions of m 3 from which more than 30 pour cent are reused. The treated volume in 2011 is expected to be 266 millions m 3 , whereas the reused wastewaters should reach more than 50 pour cent. However, especially in the eastern and northern Mediterranean regions, wastewaters are inefficiently treated and re-used for irrigation or sanitary purposes, serving as a carrier for diseases or causing water pollution when discharged to water bodies. In the last decade, several water treatment technologies have been used in the region with little success in pathogen removal. Membrane bioreactor (MBR) technology is a very promising alternative to those conventional water treatments as membranes act as a barrier against bacteria and viruses achieving a high degree of water purification. However, most membrane bioreactors currently in use have very high running costs because of the high pressure drop and high air-flushing rate required for their operation. The objective of this PURATREAT FP 6 EU project was to study a new approach to the operation of membrane bioreactors. This study was included a comparison of three leading membrane technologies. The operating procedure to be studied is expected to yield very low energy consumption and reduced maintenance costs. After the start up period, the MBR3 was operated with a MLSS concentration of 4.5 and 9 g/L, respectively. Different fluxes as 16, 18, 20 and 22 Lh -1 m -2 were tested. When the flux increase from 16 to 22 Lh -1 m -2 , the treatment energy consumption decreased from 7 to 5 kWh/m 3 . However the increases of MLSS concentration from 4.5 and 9 g/L raise the membrane fouling frequency from 1

  11. Using a Formal Approach for Reverse Engineering and Design Recovery to Support Software Reuse

    Science.gov (United States)

    Gannod, Gerald C.

    2002-01-01

    This document describes 3rd year accomplishments and summarizes overall project accomplishments. Included as attachments are all published papers from year three. Note that the budget for this project was discontinued after year two, but that a residual budget from year two allowed minimal continuance into year three. Accomplishments include initial investigations into log-file based reverse engineering, service-based software reuse, and a source to XML generator.

  12. The National Conversion Pilot Project

    International Nuclear Information System (INIS)

    Roberts, A.V.

    1995-01-01

    The National Conversion Pilot Project (NCPP) is a recycling project under way at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS) in Colorado. The recycling aim of the project is threefold: to reuse existing nuclear weapon component production facilities for the production of commercially marketable products, to reuse existing material (uranium, beryllium, and radioactively contaminated scrap metals) for the production of these products, and to reemploy former Rocky Flats workers in this process

  13. Water Reuse: From Ancient to Modern Times and the Future

    Directory of Open Access Journals (Sweden)

    Andreas N. Angelakis

    2018-05-01

    Full Text Available From the beginning of the Bronze Age (ca. 3200–1100 BC, domestic wastewater (sewage has been used for irrigation and aquaculture by a number of civilizations including those that developed in China and the Orient, Egypt, the Indus Valley, Mesopotamia, and Crete. In historic times (ca. 1000 BC−330 AD, wastewater was disposed of or used for irrigation and fertilization purposes by the Greek and later Roman civilizations, especially in areas surrounding important cities (e.g., Athens and Rome. In more recent times, the practice of land application of wastewater for disposal and agricultural use was utilized first in European cities and later in USA. Today, water reclamation and reuse projects are being planned and implemented throughout the world. Recycled water is now used for almost any purpose including potable use. This paper provides a brief overview of the evolution of water reuse over the last 5,000 years, along with current practice and recommendations for the future. Understanding the practices and solutions of the past, provides a lens with which to view the present and future.

  14. A new procedure to adapt any type of soil for the consolidation and construction of earthen structures: projected earth system

    Directory of Open Access Journals (Sweden)

    Fuentes-García, R.

    2015-09-01

    Full Text Available The “projected earth system” is put forward as an alternative construction method. The soil from each site is adapted following a specific protocol to make it suitable for spraying. The type of construction and the receiving surface determine the machinery and spraying system used (dry or wet mix. The result will be similar in texture and colour to the original material (in the case of earth walls or to the surrounding material.Se plantea la “tierra proyectada” como nuevo sistema constructivo. Se adecuará la tierra de cada intervención con un protocolo para poder ser proyectada. El tipo de intervención y el soporte sobre el que se proyectará determinarán la maquinaria y el sistema de proyección (vía seca o húmeda. El resultado tendrá similar textura y color que el soporte restaurado (en muros de tierra o que el material del entorno (en taludes carreteros u obras de tierra de nueva construcción.

  15. Finite-time hybrid projective synchronization of the drive-response complex networks with distributed-delay via adaptive intermittent control

    Science.gov (United States)

    Cheng, Lin; Yang, Yongqing; Li, Li; Sui, Xin

    2018-06-01

    This paper studies the finite-time hybrid projective synchronization of the drive-response complex networks. In the model, general transmission delays and distributed delays are also considered. By designing the adaptive intermittent controllers, the response network can achieve hybrid projective synchronization with the drive system in finite time. Based on finite-time stability theory and several differential inequalities, some simple finite-time hybrid projective synchronization criteria are derived. Two numerical examples are given to illustrate the effectiveness of the proposed method.

  16. Drivers of Microbial Risk for Direct Potable Reuse and de Facto Reuse Treatment Schemes: The Impacts of Source Water Quality and Blending

    Science.gov (United States)

    Chaudhry, Rabia M.; Hamilton, Kerry A.; Haas, Charles N.; Nelson, Kara L.

    2017-01-01

    Although reclaimed water for potable applications has many potential benefits, it poses concerns for chemical and microbial risks to consumers. We present a quantitative microbial risk assessment (QMRA) Monte Carlo framework to compare a de facto water reuse scenario (treated wastewater-impacted surface water) with four hypothetical Direct Potable Reuse (DPR) scenarios for Norovirus, Cryptosporidium, and Salmonella. Consumer microbial risks of surface source water quality (impacted by 0–100% treated wastewater effluent) were assessed. Additionally, we assessed risks for different blending ratios (0–100% surface water blended into advanced-treated DPR water) when source surface water consisted of 50% wastewater effluent. De facto reuse risks exceeded the yearly 10−4 infections risk benchmark while all modeled DPR risks were significantly lower. Contamination with 1% or more wastewater effluent in the source water, and blending 1% or more wastewater-impacted surface water into the advanced-treated DPR water drove the risk closer to the 10−4 benchmark. We demonstrate that de facto reuse by itself, or as an input into DPR, drives microbial risks more so than the advanced-treated DPR water. When applied using location-specific inputs, this framework can contribute to project design and public awareness campaigns to build legitimacy for DPR. PMID:28608808

  17. Drivers of Microbial Risk for Direct Potable Reuse and de Facto Reuse Treatment Schemes: The Impacts of Source Water Quality and Blending

    Directory of Open Access Journals (Sweden)

    Rabia M. Chaudhry

    2017-06-01

    Full Text Available Although reclaimed water for potable applications has many potential benefits, it poses concerns for chemical and microbial risks to consumers. We present a quantitative microbial risk assessment (QMRA Monte Carlo framework to compare a de facto water reuse scenario (treated wastewater-impacted surface water with four hypothetical Direct Potable Reuse (DPR scenarios for Norovirus, Cryptosporidium, and Salmonella. Consumer microbial risks of surface source water quality (impacted by 0–100% treated wastewater effluent were assessed. Additionally, we assessed risks for different blending ratios (0–100% surface water blended into advanced-treated DPR water when source surface water consisted of 50% wastewater effluent. De facto reuse risks exceeded the yearly 10−4 infections risk benchmark while all modeled DPR risks were significantly lower. Contamination with 1% or more wastewater effluent in the source water, and blending 1% or more wastewater-impacted surface water into the advanced-treated DPR water drove the risk closer to the 10−4 benchmark. We demonstrate that de facto reuse by itself, or as an input into DPR, drives microbial risks more so than the advanced-treated DPR water. When applied using location-specific inputs, this framework can contribute to project design and public awareness campaigns to build legitimacy for DPR.

  18. Drivers of Microbial Risk for Direct Potable Reuse and de Facto Reuse Treatment Schemes: The Impacts of Source Water Quality and Blending.

    Science.gov (United States)

    Chaudhry, Rabia M; Hamilton, Kerry A; Haas, Charles N; Nelson, Kara L

    2017-06-13

    Although reclaimed water for potable applications has many potential benefits, it poses concerns for chemical and microbial risks to consumers. We present a quantitative microbial risk assessment (QMRA) Monte Carlo framework to compare a de facto water reuse scenario (treated wastewater-impacted surface water) with four hypothetical Direct Potable Reuse (DPR) scenarios for Norovirus, Cryptosporidium , and Salmonella . Consumer microbial risks of surface source water quality (impacted by 0-100% treated wastewater effluent) were assessed. Additionally, we assessed risks for different blending ratios (0-100% surface water blended into advanced-treated DPR water) when source surface water consisted of 50% wastewater effluent. De facto reuse risks exceeded the yearly 10 -4 infections risk benchmark while all modeled DPR risks were significantly lower. Contamination with 1% or more wastewater effluent in the source water, and blending 1% or more wastewater-impacted surface water into the advanced-treated DPR water drove the risk closer to the 10 -4 benchmark. We demonstrate that de facto reuse by itself, or as an input into DPR, drives microbial risks more so than the advanced-treated DPR water. When applied using location-specific inputs, this framework can contribute to project design and public awareness campaigns to build legitimacy for DPR.

  19. Trends Between Modeled DeFacto Reuse and Analyzed Grab Samples for Contaminants of Emerging Concern at Water Treatment Plants in The USA

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset compared the de facto reuse percentage modeled for the 22 surface water sites sampled in Phase II of the drinking water project and the organic chemical...

  20. Picking Up Artifacts: Storyboarding as a Gateway to Reuse

    Science.gov (United States)

    Wahid, Shahtab; Branham, Stacy M.; Cairco, Lauren; McCrickard, D. Scott; Harrison, Steve

    Storyboarding offers designers the opportunity to illustrate a visual narrative of use. Because designers often refer to past ideas, we argue storyboards can be constructed by reusing shared artifacts. We present a study in which we explore how designers reuse artifacts consisting of images and rationale during storyboard construction. We find images can aid in accessing rationale and that connections among features aid in deciding what to reuse, creating new artifacts, and constructing. Based on requirements derived from our findings, we present a storyboarding tool, PIC-UP, to facilitate artifact sharing and reuse and evaluate its use in an exploratory study. We conclude with remarks on facilitating reuse and future work.

  1. Direct Reuse of Rare Earth Permanent Magnets—Coating Integrity

    DEFF Research Database (Denmark)

    Høgberg, Stig; Holbøll, Joachim; Mijatovic, Nenad

    2017-01-01

    Rare earth permanent magnets can be reused directly as an alternative to traditional recycling methods, in which scrapped magnets are reprocessed into new magnets by undergoing many of the original energy-intensive and expensive production processes. Direct reuse entails using segmented magnet...... assemblies built by several small standard-sized magnets that can be reused directly in a number of different applications. A central part of the direct reuse strategy is to separate and demagnetize magnets by heating them to the Curie temperature. We investigated the validity of direct reuse as a rare earth...

  2. Study on the reuse of nodular casting

    International Nuclear Information System (INIS)

    Bermont, V.M; Gomez, C.A; Lamas, J.F; Castillo, R.N

    2004-01-01

    Nodular cast pieces that have worn out are an attractive alternative to be reused as a cheap raw material for directly making other pieces. This materials recycling process often requires new and successive thermal treatments in order to be machined, to obtain the proper mechanical and microstructural properties. This work includes the results of the microstructural analysis by optic and Scanning Electron Microscopy and of the mechanical tests for traction and hardness of the test pieces submitted to different successive thermal treatments. The results show that by means of successive thermal treatments, followed by austemperizing, the appropriate mechanical and microstructural properties can be recovered permitting the nodular castings that were studied to be reliably reused (CW)

  3. Reuse and recycling of radioactive material packaging

    International Nuclear Information System (INIS)

    Gerulis, Eduardo; Zapparoli, Carlos Leonel; Barboza, Marycel Figols de

    2009-01-01

    Human development is directly linked to energy consumption. The political decisions (to this human development) result in economic, social and environmental aspects, whose magnitude should maintain the sustainability of every aspect for not to collapsing. The environmental aspect has been a target of research because of the excessive emission of gases which contributes to the greenhouse effect. The production processes emit gases due to the consumption of energy to get it, but it is necessary to maintain the environmental sustainability in order to minimize the contribution to the emission of greenhouse gases. The population control and the energetic efficiency are factors that contribute to the environmental sustainability. Besides them, the culture of consumption is another factor that, when applied to the reduction of emissions, also contributes to the sustainability of the environment. The reuse of materials is one of the sub-factors which contribute to the reduction of emissions. The Radiopharmacy Directory (DIRF) at IPEN-CNEN/SP, produces radiopharmaceuticals that are necessary to improve the Brazilian population's life quality. The radiopharmaceuticals are transported in packaging to the transport of radioactive material. These packages are considered non-biodegradable, because some metals, which make up these packages, pollute the environment. These packages have increased costs, in addition, because it must be approved in tests of integrity. The reuse of packaging in favorable situations to the same purpose is a way to help the environment degradation and costs reduction. The packaging reuse in unfavorable situations disobey rules or return logistics that become effective the transport back, but the consumption culture strengthening can change this situation. This paper describes IPEN's packaging, form and quantities distribution, and the packaging that comes back to be reused. (author)

  4. Hybrid membrane processes for water reuse

    OpenAIRE

    Pidou, Marc

    2006-01-01

    Water recycling is now widely accepted as a sustainable option to respond to the general increase of the fresh water demand, water shortages and for environment protection. Because greywater represents up to 70% of domestic wastewater volume but contains only 30% of the organic fraction and from 9 to 20% of the nutrients (Kujawa-Roeleveld and Zeeman, 2006), it is seen as one of the most appropriate sources to be treated and reuse. A broad range of technologies has been used for...

  5. Electrodialysis and water reuse novel approaches

    CERN Document Server

    Rodrigues, Marco; Ferreira, Jane

    2014-01-01

    This book presents novel techniques to evaluate electrodialysis processes, to synthesize ionic membranes and to characterize their properties. It shows the potential use of membrane process to the treatment of effluents generated in many industrial sectors such as refineries, leather industries, mining and electroplating processes. The book is based on the results obtained by the author's research group during the past decade. It is useful for students, researchers and engineers interested in membrane technologies for water reuse.

  6. Management experiences and trends for water reuse implementation in Northern California.

    Science.gov (United States)

    Bischel, Heather N; Simon, Gregory L; Frisby, Tammy M; Luthy, Richard G

    2012-01-03

    In 2010, California fell nearly 300,000 acre-ft per year (AFY) short of its goal to recycle 1,000,000 AFY of municipal wastewater. Growth of recycled water in the 48 Northern California counties represented only 20% of the statewide increase in reuse between 2001 and 2009. To evaluate these trends and experiences, major drivers and challenges that influenced the implementation of recycled water programs in Northern California are presented based on a survey of 71 program managers conducted in 2010. Regulatory requirements limiting discharge, cited by 65% of respondents as a driver for program implementation, historically played an important role in motivating many water reuse programs in the region. More recently, pressures from limited water supplies and needs for system reliability are prevalent drivers. Almost half of respondents (49%) cited ecological protection or enhancement goals as drivers for implementation. However, water reuse for direct benefit of natural systems and wildlife habitat represents just 6-7% of total recycling in Northern California and few financial incentives exist for such projects. Economic challenges are the greatest barrier to successful project implementation. In particular, high costs of distribution systems (pipelines) are especially challenging, with $1 to 3 million/mile costs experienced. Negative perceptions of water reuse were cited by only 26% of respondents as major hindrances to implementation of surveyed programs.

  7. SRS stainless steel beneficial reuse program

    Energy Technology Data Exchange (ETDEWEB)

    Boettinger, W.L.

    1997-02-01

    The US Department of Energy`s (DOE) Savannah River Site (SRS) has thousands of tons of stainless steel radioactive scrap metal (RSNI). Much of the metal is volumetrically contaminated. There is no {open_quotes}de minimis{close_quotes} free release level for volumetric material, and therefore no way to recycle the metal into the normal commercial market. If declared waste, the metal would qualify as low level radioactive waste (LLW) and ultimately be dispositioned through shallow land buried at a cost of millions of dollars. The metal however could be recycled in a {open_quotes}controlled release{close_quote} manner, in the form of containers to hold other types of radioactive waste. This form of recycle is generally referred to as {open_quotes}Beneficial Reuse{close_quotes}. Beneficial reuse reduces the amount of disposal space needed and reduces the need for virgin containers which would themselves become contaminated. Stainless steel is particularly suited for long term storage because of its resistance to corrosion. To assess the practicality of stainless steel RSM recycle the SRS Benficial Reuse Program began a demonstration in 1994, funded by the DOE Office of Science and Technology. This paper discusses the experiences gained in this program.

  8. Indirect Potable Reuse: A Sustainable Water Supply Alternative

    Directory of Open Access Journals (Sweden)

    Clemencia Rodriguez

    2009-03-01

    Full Text Available The growing scarcity of potable water supplies is among the most important issues facing many cities, in particular those using single sources of water that are climate dependent. Consequently, urban centers are looking to alternative sources of water supply that can supplement variable rainfall and meet the demands of population growth. A diversified portfolio of water sources is required to ensure public health, as well as social, economical and environmental sustainability. One of the options considered is the augmentation of drinking water supplies with advanced treated recycled water. This paper aims to provide a state of the art review of water recycling for drinking purposes with emphasis on membrane treatment processes. An overview of significant indirect potable reuse projects is presented followed by a description of the epidemiological and toxicological studies evaluating any potential human health impacts. Finally, a summary of key operational measures to protect human health and the areas that require further research are discussed.

  9. Acquiring, encoding, and re-using clinical knowledge in PRODIGY

    Directory of Open Access Journals (Sweden)

    Richard Hall

    2002-11-01

    Full Text Available The development, implementation and maintenance of computer-executable clinical guidelines encompass a series of complex processes. As they are often performed by more than one organisation, this introduces further complexity. Within the PRODIGY project we attempt to control as many aspects of the process as possible, in order to increase the likelihood of achieving success. To illustrate the complexity of the process and many of the inherent problems and solutions, this paper describes the evolution of the PRODIGY knowledge base, describing the steps from acquiring knowledge, through encoding, to the execution of guidelines, and 'closing the loop' by discussing an approach to knowledge re-use. We will also consider some of the wider implications of our work and propose directions for future research and development activities.

  10. Indirect Potable Reuse: A Sustainable Water Supply Alternative

    Science.gov (United States)

    Rodriguez, Clemencia; Van Buynder, Paul; Lugg, Richard; Blair, Palenque; Devine, Brian; Cook, Angus; Weinstein, Philip

    2009-01-01

    The growing scarcity of potable water supplies is among the most important issues facing many cities, in particular those using single sources of water that are climate dependent. Consequently, urban centers are looking to alternative sources of water supply that can supplement variable rainfall and meet the demands of population growth. A diversified portfolio of water sources is required to ensure public health, as well as social, economical and environmental sustainability. One of the options considered is the augmentation of drinking water supplies with advanced treated recycled water. This paper aims to provide a state of the art review of water recycling for drinking purposes with emphasis on membrane treatment processes. An overview of significant indirect potable reuse projects is presented followed by a description of the epidemiological and toxicological studies evaluating any potential human health impacts. Finally, a summary of key operational measures to protect human health and the areas that require further research are discussed. PMID:19440440

  11. Beneficial reuse of empty DUF{sub 6} cylinders

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, L.A.; Arnish, J.; Nabelssi, B. [Argonne National Lab., IL (United States)

    1997-02-01

    This paper discusses options for the disposal of depleted UF{sub 6} storage cylinders as they are freed over the next 20 years. Presently there are 46,000 mild steel cylinders in use, and projections show 600,000 tons of steel being freed over 20 years. The paper discusses the results of studies which have looked at various aspects of this issue: health risks; environmental impacts; costs and hassles; impact of DOE metal recycle policy. The general conclusions were that chemical and trauma risks dominate the risk evaluations, that risk levels are broadly speaking level for the studied disposition options, that environmental risks are highest for burial, and lowest for free release, while costs are higher for burial and recycling, than for reuse or free release.

  12. Mixed H∞ and passive projective synchronization for fractional-order memristor-based neural networks with time delays via adaptive sliding mode control

    Science.gov (United States)

    Song, Shuai; Song, Xiaona; Balsera, Ines Tejado

    2017-05-01

    This paper investigates the mixed H∞ and passive projective synchronization problem for fractional-order (FO) memristor-based neural networks with time delays. Our aim is to design a controller such that, though the unavoidable phenomena of time delay and external disturbances is fully considered, the resulting closed-loop system is stable with a mixed H∞ and passive performance level. By combining sliding mode control and adaptive control methods, a novel adaptive sliding mode control strategy is designed for the synchronization of time-delayed FO dynamic networks. Via the application of FO system stability theory, the projective synchronization conditions are addressed in terms of linear matrix inequalities. Based on the conditions, a desired controller which can guarantee the stability of the closed-loop system and also ensure a mixed H∞ and passive performance level is designed. Finally, two simulation examples are given to illustrate the effectiveness of the proposed method.

  13. Adaptive generalized function matrix projective lag synchronization between fractional-order and integer-order complex networks with delayed coupling and different dimensions

    International Nuclear Information System (INIS)

    Dai, Hao; Si, Gangquan; Jia, Lixin; Zhang, Yanbin

    2013-01-01

    This paper investigates generalized function matrix projective lag synchronization between fractional-order and integer-order complex networks with delayed coupling, non-identical topological structures and different dimensions. Based on Lyapunov stability theory, generalized function matrix projective lag synchronization criteria are derived by using the adaptive control method. In addition, the three-dimensional fractional-order chaotic system and the four-dimensional integer-order hyperchaotic system as the nodes of the drive and the response networks, respectively, are analyzed in detail, and numerical simulation results are presented to illustrate the effectiveness of the theoretical results. (paper)

  14. Closed cycle construction: an integrated process for the separation and reuse of C&D waste.

    Science.gov (United States)

    Mulder, Evert; de Jong, Tako P R; Feenstra, Lourens

    2007-01-01

    In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.

  15. Performance Efficient Launch Vehicle Recovery and Reuse

    Science.gov (United States)

    Reed, John G.; Ragab, Mohamed M.; Cheatwood, F. McNeil; Hughes, Stephen J.; Dinonno, J.; Bodkin, R.; Lowry, Allen; Brierly, Gregory T.; Kelly, John W.

    2016-01-01

    For decades, economic reuse of launch vehicles has been an elusive goal. Recent attempts at demonstrating elements of launch vehicle recovery for reuse have invigorated a debate over the merits of different approaches. The parameter most often used to assess the cost of access to space is dollars-per-kilogram to orbit. When comparing reusable vs. expendable launch vehicles, that ratio has been shown to be most sensitive to the performance lost as a result of enabling the reusability. This paper will briefly review the historical background and results of recent attempts to recover launch vehicle assets for reuse. The business case for reuse will be reviewed, with emphasis on the performance expended to recover those assets, and the practicality of the most ambitious reuse concept, namely propulsive return to the launch site. In 2015, United Launch Alliance (ULA) announced its Sensible, Modular, Autonomous Return Technology (SMART) reuse plan for recovery of the booster module for its new Vulcan launch vehicle. That plan employs a non-propulsive approach where atmospheric entry, descent and landing (EDL) technologies are utilized. Elements of such a system have a wide variety of applications, from recovery of launch vehicle elements in suborbital trajectories all the way to human space exploration. This paper will include an update on ULA's booster module recovery approach, which relies on Hypersonic Inflatable Aerodynamic Decelerator (HIAD) and Mid-Air Retrieval (MAR) technologies, including its concept of operations (ConOps). The HIAD design, as well as parafoil staging and MAR concepts, will be discussed. Recent HIAD development activities and near term plans including scalability, next generation materials for the inflatable structure and heat shield, and gas generator inflation systems will be provided. MAR topics will include the ConOps for recovery, helicopter selection and staging, and the state of the art of parachute recovery systems using large parafoils

  16. Dynamic Membrane Technology for Printing Wastewater Reuse

    Science.gov (United States)

    Liu, Lin; Lu, Xujie; Chen, Jihua

    As environmental regulations become rigid and the cost of freshwater increases, wastewater is considered as a major resource in China. The paper presented a study on the implementation of the advanced treatment process using dynamic membrane (DM) in reusing of printing wastewater. The DM was well formed by circulating 1.5g/L of PAC in 20 minutes, the trans-membrane pressure of 200 kPa and the cross-flow velocity of 0.75m/s. The printing effluents were treated in effluent treatment plants comprising a physicochemical option followed by biological process. The treated effluent contained chemical oxygen demand (COD), color and turbidity in the range of 45-60 mg/L, 0.030-0.045 (absorbance at 420 nm) and 3-5 NTU. The results showed that the COD, color and turbidity removal efficiencies of the DM permeate were 84%, 85% and 80%, respectively. The wastewater treated by DM was reused as process water and the final concentrated retentate could be discharged directly into sewage treatment works with no additional treatments. Cleaning and regeneration of DM were very convenient if necessary. The proper process was that the polluted DM was cleaned with tap water at high cross-flow velocity. When irreversible pollutants accumulate, it would be rinsed with chemicals tested and the membrane flux would be restored up to 95%. The result showed that DM was considered as a promising method for purification aimed at reuse of printing wastewater, resulting in direct environmental and economic benefits.

  17. Adaptive Management for Decision Making at the Program and Project Levels of the Missouri River Recovery Program

    Energy Technology Data Exchange (ETDEWEB)

    Thom, Ronald M.; Anderson, Michael G.; Tyre, Drew; Fleming, Craig A.

    2009-02-28

    The paper, “Adaptive Management: Background for Stakeholders in the Missouri River Recovery Program,” introduced the concept of adaptive management (AM), its principles and how they relate to one-another, how AM is applied, and challenges for its implementation. This companion paper describes how the AM principles were applied to specific management actions within the Missouri River Recovery Program to facilitate understanding, decision-making, and stakeholder engagement. For context, we begin with a brief synopsis of the Missouri River Recovery Program (MRRP) and the strategy for implementing adaptive management (AM) within the program; we finish with an example of AM in action within Phase I of the MRPP.

  18. [Filing and reuse of research data].

    Science.gov (United States)

    Osler, Merete; Bredahl, Lone; Ousager, Steen

    2008-02-25

    Currently several scientific journals only publish data from randomised clinical trials which are registered in a public database. Similar requirements on data sharing now follow grants from agencies such as the National Institute of Health. In Denmark the Health unit at the Danish Data Archive (DDA/Health) offers Danish researchers to keep their data for free on conditions that fulfil the above requirements. DDA/Health also passes on research data for reuse, and at present more than 300 studies are available in a database on sundhed.dda.dk.

  19. Results on reuse of reclaimed shower water

    Science.gov (United States)

    Verostko, Charles E.; Garcia, Rafael; Pierson, Duane L.; Reysa, Richard P.; Irbe, Robert

    1986-01-01

    The Waste Water Recovery System that has been used in conjunction with a microgravity whole body shower to test a closed loop shower water reclamation system applicable to the NASA Space Station employs a Thermoelectric Integrated Hollow Fiber Membrane Evaporation Subsystem. Attention is given to the suitability of a Space Shuttle soap for such crew showers, the effects of shower water on the entire system, and the purification qualities of the recovered water. The chemical pretreatment of the shower water for microorganism control involved activated carbon, mixed ion exchange resin beds, and iodine bactericide dispensing units. The water was recycled five times, demonstrating the feasibility of reuse.

  20. Computed Tomography Image Quality Evaluation of a New Iterative Reconstruction Algorithm in the Abdomen (Adaptive Statistical Iterative Reconstruction-V) a Comparison With Model-Based Iterative Reconstruction, Adaptive Statistical Iterative Reconstruction, and Filtered Back Projection Reconstructions.

    Science.gov (United States)

    Goodenberger, Martin H; Wagner-Bartak, Nicolaus A; Gupta, Shiva; Liu, Xinming; Yap, Ramon Q; Sun, Jia; Tamm, Eric P; Jensen, Corey T

    The purpose of this study was to compare abdominopelvic computed tomography images reconstructed with adaptive statistical iterative reconstruction-V (ASIR-V) with model-based iterative reconstruction (Veo 3.0), ASIR, and filtered back projection (FBP). Abdominopelvic computed tomography scans for 36 patients (26 males and 10 females) were reconstructed using FBP, ASIR (80%), Veo 3.0, and ASIR-V (30%, 60%, 90%). Mean ± SD patient age was 32 ± 10 years with mean ± SD body mass index of 26.9 ± 4.4 kg/m. Images were reviewed by 2 independent readers in a blinded, randomized fashion. Hounsfield unit, noise, and contrast-to-noise ratio (CNR) values were calculated for each reconstruction algorithm for further comparison. Phantom evaluation of low-contrast detectability (LCD) and high-contrast resolution was performed. Adaptive statistical iterative reconstruction-V 30%, ASIR-V 60%, and ASIR 80% were generally superior qualitatively compared with ASIR-V 90%, Veo 3.0, and FBP (P ASIR-V 60% with respective CNR values of 5.54 ± 2.39, 8.78 ± 3.15, and 3.49 ± 1.77 (P ASIR 80% had the best and worst spatial resolution, respectively. Adaptive statistical iterative reconstruction-V 30% and ASIR-V 60% provided the best combination of qualitative and quantitative performance. Adaptive statistical iterative reconstruction 80% was equivalent qualitatively, but demonstrated inferior spatial resolution and LCD.

  1. Design reuse in product shape modeling : A study of freeform feature reuse by signal processing techniques

    NARCIS (Netherlands)

    Wang, C.

    2005-01-01

    Lack of facilities in supporting design reuse is a serious problem in product shape modeling, especially in computer-aided design systems. This becomes a bottleneck of fast shape conceptualization and creation in consumer product design, which consequently prohibits creativity and innovation. In the

  2. Water Reuse Highlights: A Summary Volume of Wastewater Reclamation and Reuse Information.

    Science.gov (United States)

    American Water Works Association, Denver, CO. Research Foundation.

    This document reports the efforts of the AWWA Research Foundation to gather, prepare, and distribute current technical information in the wastewater reclamation and reuse field. The information reported has been abstracted from other Foundation publications and only attempts here to highlight the field. Categories discussed include research,…

  3. An experimental school prototype: Integrating 3rs (reduce, reuse & recycle) concept into architectural design

    OpenAIRE

    Kong Seng Yeap; Sreenivasaiah Purushothama Rao

    2012-01-01

    The authors conducted a design project to examine the use of school as an ecological learning hub for children. Specifically, this study explores the ecological innovations that transform physical environment into three-dimensional textbooks for environmental education. A series of design workshops were carried out to gain interdisciplinary input for ecological school design. The findings suggest to integrate the concept of 3Rs (Reduce, Reuse & Recycle) into the physical environment. As a res...

  4. Waste water reuse as an alternative to the traditional water resources

    Energy Technology Data Exchange (ETDEWEB)

    Di Pinto, A.P.; Ramadori, R.; Santilli, N. [Consiglio Nazionale delle Ricerche, Rome (Italy). Ist. di Ricerca sulle Acque; Lopez, A. [Consiglio Nazionale delle Ricerche, Bari (Italy). Ist. di Ricerca sulle Acque

    1999-10-01

    After e brief presentation of the most significant international projects carried out in order to quantify the risk of infection in waste water reuse for irrigation, this paper examines, in a critical way, the disinfection technologies which are available today. [Italian] Il presente lavoro, dopo una breve rassegna sulle piu' significative esperienze internazionali condotte al fine di stabilire i rischi ambientali del riutilizzo delle acque in agricoltura, esamina in modo critico le principali tecniche di disinfestazione oggi disponibili.

  5. Evaluation of appropriate technologies for grey water treatments and reuses.

    Science.gov (United States)

    Li, Fangyue; Wichmann, Knut; Otterpohl, Ralf

    2009-01-01

    As water is becoming a rare resource, the onsite reuse and recycling of grey water is practiced in many countries as a sustainable solution to reduce the overall urban water demand. However, the lack of appropriate water quality standards or guidelines has hampered the appropriate grey water reuses. Based on literature review, a non-potable urban grey water treatment and reuse scheme is proposed and the treatment alternatives for grey water reuse are evaluated according to the grey water characteristics, the proposed standards and economical feasibility.

  6. Dialyzer Reuse and Outcomes of High Flux Dialysis.

    Science.gov (United States)

    Argyropoulos, Christos; Roumelioti, Maria-Eleni; Sattar, Abdus; Kellum, John A; Weissfeld, Lisa; Unruh, Mark L

    2015-01-01

    The bulk of randomized trial evidence for the expanding use of High Flux (HF) hemodialysis worldwide comes from two randomized controlled trials, one of which (HEMODIALYSIS, HEMO) allowed, while the other (Membrane Outcomes Permeability, MPO) excluded, the reuse of membranes. It is not known whether dialyzer reuse has a differential impact on outcomes with HF vs low flyx (LF) dialyzers. Proportional Hazards Models and Joint Models for longitudinal measures and survival outcomes were used in HEMO to analyze the relationship between β2-microglobulin (β2M) concentration, flux, and reuse. Meta-analysis and regression techniques were used to synthesize the evidence for HF dialysis from HEMO and MPO. In HEMO, minimally reused (membranes (p for interaction between reuse and flux benefit with more extensively reused dialyzers. Meta-regression of HEMO and MPO estimated an adjusted HR of 0.63 (95% CI: 0.51-0.78) for non-reused HF dialyzers compared with non-reused LF membranes. This secondary analysis and synthesis of two large hemodialysis trials supports the widespread use of HF dialyzers in clinical hemodialysis over the last decade. A mechanistic understanding of the effects of HF dialysis and the reuse process on dialyzers may suggest novel biomarkers for uremic toxicity and may accelerate membrane technology innovations that will improve patient outcomes.

  7. Managing a project's legacy: implications for organizations and project management

    Science.gov (United States)

    Cooper, Lynne P.; Hecht, Michael H.; Majchrzak, Ann

    2003-01-01

    Organizations that rely on projects to implement their products must find effective mechanisms for propagating lessons learned on one project throughout the organization. A broad view of what constitutes a project's 'legacy' is presented that includes not just the design products and leftover parts, but new processes, relationships, technology, skills, planning data, and performance metrics. Based on research evaluating knowledge reuse in innovative contexts, this paper presents an approach to project legacy management that focuses on collecting and using legacy knowledge to promote organizational learning and effective reuse, while addressing factors of post-project responsibility, information obsolescence, and the importance of ancillary contextual information. .

  8. Set-Membership Proportionate Affine Projection Algorithms

    Directory of Open Access Journals (Sweden)

    Stefan Werner

    2007-01-01

    Full Text Available Proportionate adaptive filters can improve the convergence speed for the identification of sparse systems as compared to their conventional counterparts. In this paper, the idea of proportionate adaptation is combined with the framework of set-membership filtering (SMF in an attempt to derive novel computationally efficient algorithms. The resulting algorithms attain an attractive faster converge for both situations of sparse and dispersive channels while decreasing the average computational complexity due to the data discerning feature of the SMF approach. In addition, we propose a rule that allows us to automatically adjust the number of past data pairs employed in the update. This leads to a set-membership proportionate affine projection algorithm (SM-PAPA having a variable data-reuse factor allowing a significant reduction in the overall complexity when compared with a fixed data-reuse factor. Reduced-complexity implementations of the proposed algorithms are also considered that reduce the dimensions of the matrix inversions involved in the update. Simulations show good results in terms of reduced number of updates, speed of convergence, and final mean-squared error.

  9. Adaptive user interfaces

    CERN Document Server

    1990-01-01

    This book describes techniques for designing and building adaptive user interfaces developed in the large AID project undertaken by the contributors.Key Features* Describes one of the few large-scale adaptive interface projects in the world* Outlines the principles of adaptivity in human-computer interaction

  10. Projected impacts of climate change on hydrology, water resource use and adaptation needs for the Chu and Talas cross-border rivers basin, Central Asia

    Science.gov (United States)

    Shamil Iliasov, Shamil; Dolgikh, Svetlana; Lipponen, Annukka; Novikov, Viktor

    2014-05-01

    The observed long-term trends, variability and projections of future climate and hydrology of the Chu and Talas transboundary rivers basin were analysed using a common approach for Kazakhstan and Kyrgyzstan parts of the basin. Historical, current and forecasted demands and main uses of water in the basin were elaborated by the joint effort of both countries. Such cooperative approach combining scientific data, water practitioners' outlook with decision making needs allowed the first time to produce a comprehensive assessment of climate change impacts on water resources in the Chu-Talas transboundary rivers basin, identify future needs and develop the initial set of adaptation measures and recommendations. This work was carried out under the project "Promoting Cooperation to Adapt to Climate Change in the Chu and Talas Transboundary Basin", supported by the United Nations Economic Commission for Europe (UNECE) and the United Nations Development Programme (UNDP). Climate change projections, including air temperatures and rainfall in the 21st century were determined with a spatial resolution 0.5 degrees based on the integration of 15 climate change model outputs (derived from IPCC's 4th Assessment Report, and partially 5th Assessment Report) combined with locally-designed hydrology and glacier models. A significant increase in surface air temperatures by 3-6°C may be expected in the basin area, especially in summer and autumn. This change is likely to be accompanied by rainfall increase during the cold season and a decrease in the warm half of the year. As a result, a deterioration of moisture conditions during the summer-autumn period is possible. Furthermore, milder winters and hotter summers can be expected. Mountains will likely receive more liquid precipitation, than snow, while the area and volume of glaciers may significantly reduce. Projected changes in climate and glaciers have implications for river hydrology and different sectors of the economy dependent

  11. Full-Scaled Advanced Systems Testbed: Ensuring Success of Adaptive Control Research Through Project Lifecycle Risk Mitigation

    Science.gov (United States)

    Pavlock, Kate M.

    2011-01-01

    The National Aeronautics and Space Administration's Dryden Flight Research Center completed flight testing of adaptive controls research on the Full-Scale Advance Systems Testbed (FAST) in January of 2011. The research addressed technical challenges involved with reducing risk in an increasingly complex and dynamic national airspace. Specific challenges lie with the development of validated, multidisciplinary, integrated aircraft control design tools and techniques to enable safe flight in the presence of adverse conditions such as structural damage, control surface failures, or aerodynamic upsets. The testbed is an F-18 aircraft serving as a full-scale vehicle to test and validate adaptive flight control research and lends a significant confidence to the development, maturation, and acceptance process of incorporating adaptive control laws into follow-on research and the operational environment. The experimental systems integrated into FAST were designed to allow for flexible yet safe flight test evaluation and validation of modern adaptive control technologies and revolve around two major hardware upgrades: the modification of Production Support Flight Control Computers (PSFCC) and integration of two, fourth-generation Airborne Research Test Systems (ARTS). Post-hardware integration verification and validation provided the foundation for safe flight test of Nonlinear Dynamic Inversion and Model Reference Aircraft Control adaptive control law experiments. To ensure success of flight in terms of cost, schedule, and test results, emphasis on risk management was incorporated into early stages of design and flight test planning and continued through the execution of each flight test mission. Specific consideration was made to incorporate safety features within the hardware and software to alleviate user demands as well as into test processes and training to reduce human factor impacts to safe and successful flight test. This paper describes the research configuration

  12. Evaluation of external exposure during building and operation of concrete bridges constructions that reuse the conditionally released steels - 59120

    International Nuclear Information System (INIS)

    Panik, Michal; Necas, Vladimir

    2012-01-01

    This paper presents ongoing results of the project presented at ICEM'10 [1] related to the topics of reusing the conditionally released materials from decommissioning. The subject of the reuse of conditionally released materials in this case is modeling of bridge constructions which reuse the conditionally released steel in the form of reinforcement bars for the concrete bridges. A general approach for the project was presented at ICEM'10. The activities of the project continue in evaluating the individual effective doses from the external exposure based on reused conditionally released steels separately for public and for professionals (the internal exposure will be evaluated in next stages of the project). Evaluated scenarios are related to critical groups of professionals constructing the bridges (worker's scenarios). The computer code VISIPLAN 3D ALARA 4.0 planning tool was used for the calculation of the individual effective dose for professionals. Various limits of the annual individual effective dose are used for the evaluation of calculation results. The aim of the ongoing modeling is to develop a set of data of maximal radioactivity concentration for individual radionuclides in the conditionally released steel used in the bridges model constructions in order not to exceed the limits for the individual effective dose. (authors)

  13. Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

    Science.gov (United States)

    Grzonka, Aleksandra

    2015-12-01

    Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

  14. Design Problems With Renovating And Adapting An Old Mill On The Example Of The Execution Of An Original Project

    Directory of Open Access Journals (Sweden)

    Grzonka Aleksandra

    2015-12-01

    Full Text Available Nowadays, postindustrial areas and buildings are becoming more and more valuable. Very popular are those with special historical and architectural values, which are additionally located in large cities. The situation of those possessing fewer attributes encouraging their adaptation is worse. Sometimes, however, there are reasons why a decision is made to invest in such buildings despite the many difficulties connected with the implementation of these investments. This situation was presented on the example of the renovation and adaptation of an old electric mill in Łaziec into a restaurant.

  15. Water Utility Lime Sludge Reuse – An Environmental Sorbent ...

    Science.gov (United States)

    Lime sludge can be used as an environmental sorbent to remove sulfur dioxide (SO2) and acid gases, by the ultra-fine CaCO3 particles, and to sequester mercury and other heavy metals, by the Natural Organic Matter and residual activated carbon. The laboratory experimental set up included a simulated flue gas preparation unit, a lab-scale wet scrubber, and a mercury analyzer system. The influent mercury concentration was based on a range from 22 surveyed power plants. The reactivity of the lime sludge sample for acid neutralization was determined using a method similar to method ASTM C1318-95. Similar experiments were conducted using reagent calcium carbonate and calcium sulfate to obtain baseline data for comparing with the lime sludge test results. The project also evaluated the techno-economic feasibility and sustainable benefits of reusing lime softening sludge. If implemented on a large scale, this transformative approach for recycling waste materials from water treatment utilities at power generation utilities for environmental cleanup can save both water and power utilities millions of dollars. Huge amounts of lime sludge waste, generated from hundreds of water treatment utilities across the U.S., is currently disposed in landfills. This project evaluated a sustainable and economically-attractive approach to the use of lime sludge waste as a valuable resource for power generation utilities.

  16. Navigating mega projects through complexity and uncertainty: strategic and adaptive capacity in planning and decision-making

    NARCIS (Netherlands)

    Giezen, M.

    2012-01-01

    Over the last few decades, there has been an increasing interest in mega projects from both policy makers and academics. Of particular concern to both has been the seemingly structural time and cost overruns associated with these projects. In response a tendency, especially of policy makers, has

  17. Decision-Making Methodologies for Reuse of Industrial Assets

    Directory of Open Access Journals (Sweden)

    J. Claver

    2018-01-01

    Full Text Available When there is a social consensus that industrial assets are in fact heritage elements of cultural interest, their conservation and reuse must be considered with approaches that offer greater guarantees and that prevent their exposure to aggressive actions. In order for this to materialise, many aspects must be included in the decision-making process, from the characteristics of an asset and its surroundings, to the valuable aspects that distinguish it and that must be protected. This study aims to develop tools that guide the decision-making process regarding the most appropriate activity for each specific case study. Multicriteria Decision Support Techniques are evaluated as adequate support to create a proposal that fulfils these objectives. Furthermore, the Analytic Hierarchy Process is adapted to develop methodologies for assessing both the heritage value and the most compatible uses according to the characteristics of the asset. Subsequently, they are connected and such considerations regarding the heritage value of the asset are incorporated into the final decision. The tools developed are then applied to a case study to test their performance, assess their usefulness, and identify possible applications and future developments.

  18. 20 CFR 616.10 - Reuse of employment and wages.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Reuse of employment and wages. 616.10 Section 616.10 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR INTERSTATE ARRANGEMENT FOR COMBINING EMPLOYMENT AND WAGES § 616.10 Reuse of employment and wages. Employment and wages...

  19. Methods & tools for publishing & reusing linked open statistical data

    NARCIS (Netherlands)

    Tambouris, Efthimios; Kalampokis, Evangelos; Janssen, M.F.W.H.A.; Krimmer, Robert; Tarabanis, Konstantinos

    2017-01-01

    The number of open data available for reuse is rapidly increasing. A large number of these data are numerical thus can be easily visualized. Linked open data technology enables easy reuse and linking of data residing in di.erent locations. In this workshop, we will present a number of

  20. Water Reuse in Industrial food Processing. | Pagella | Journal of ...

    African Journals Online (AJOL)

    While water, as an industrial commodity, is considered increasingly as a valuable material and the subject of responsible care for the environment, water reuse is increasingly regarded as a tool for substantial reduction in water supply needs, and saving in related costs. A strategic approach to water reuse must be based on ...

  1. Use of ozone in a water reuse system for salmonids

    Science.gov (United States)

    Williams, R.C.; Hughes, S.G.; Rumsey, G.L.

    1982-01-01

    A water reuse system is described in which ozone is used in addition to biological filters to remove toxic metabolic wastes from the water. The system functions at a higher rate of efficiency than has been reported for other reuse systems and supports excellent growth of rainbow trout (Salmo gairdneri).

  2. Recycling and reuse of wastewater from uranium mining and milling

    International Nuclear Information System (INIS)

    Xu Lechang; Gao Jie; Zhang Xueli; Wei Guangzhi; Zhang Guopu

    2010-01-01

    Uranium mining/milling process, and the sources, recycling/reuse approach and treatment methods of process wastewater are introduced. The wastewater sources of uranium mining and milling include effluent, raffinate, tailings water, mine discharge, resin form converted solution, and precipitation mother liquor. Wastewater can be recycled/reused for leachant, eluent, stripping solution,washing solution and tailings slurry. (authors)

  3. OAI Object Re-Use and Exchange

    CERN Multimedia

    CERN. Geneva

    2007-01-01

    There is a growing interest in appropriating these tools and modalities to support the scholarly communication process. This begins with leveraging the intrinsic value of scholarly digital objects beyond the borders of the hosting repository. There are numerous examples of the need to re-use objects across repositories in scholarly communication. These include citation, preservation, virtual collections of distributed objects, and the progression of units of scholarly communication through the registration-certification-awareness-archiving chain. The last several years have brought about numerous open source repository systems and their associated communities. The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) has been the initial catalyst for repository interoperability. However, there is now a rising interest in repositories no longer bein...

  4. Water reuse by membrane bioreactors (MBR)

    International Nuclear Information System (INIS)

    Garcia, G.; Huete, E.; Martinez, L. C.; Torres, A.

    2010-01-01

    This paper shows an up-to date overview of the use of membrane bioreactor (MBR) to obtain water treated for reusing it. Considering the existing rules. it has been presented a summary of published studies in which the quality of the effluent is analyzed in terms on physico-chemical and biological parameters. Furthermore, MBR results are compared with the conventional treatment ones. Due to the suitability of MBR technology for removing pathogens, particular attention has been paid to disinfection process and the mechanism that govern it. Results from reviewed studies of MBR have showed equal or better quality of water treated than conventional treatments (activated sludge plus disinfection tertiary treatment by the addition of antibacterial agents). (Author) 32 refs.

  5. Technology for reuse of contaminated concrete constituents

    International Nuclear Information System (INIS)

    Binkhorst, I.P.; Cornelissen, H.A.W.

    1998-01-01

    During decommissioning activities of nuclear installations, large amounts of contaminated concrete will have to be processed. All this concrete has to be treated and stored as radioactive waste, which implies major economical and environmental consequences. It was shown that the contamination is mainly concentrated in the porous cement stone. By separating this cement stone from the clean dense aggregate particles, a considerable volume reduction can be reached. KEMA has developed, designed and constructed a pilot plant scale test installation for separation of aggregate from contaminated concrete. The separation is based on a thermal treatment followed by milling and sieving. The clean aggregate can be re-used in concrete, whereas the (slightly) contaminated cement stone could be upgraded to a binder for concrete used in the nuclear industry. (author)

  6. OAI Object Re-Use and Exchange

    CERN Document Server

    CERN. Geneva; Jacobs, Neil

    2007-01-01

    YouTube, Flickr, del.icio.us, blogs, message boards and other "Web 2.0" related technologies are indicative of the contemporary web experience. There is a growing interest in appropriating these tools and modalities to support the scholarly communication process. This begins with leveraging the intrinsic value of scholarly digital objects beyond the borders of the hosting repository. There are numerous examples of the need to re-use objects across repositories in scholarly communication. These include citation, preservation, virtual collections of distributed objects, and the progression of units of scholarly communication through the registration-certification-awareness-archiving chain. The last several years have brought about numerous open source repository systems and their associated communities. The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) has been the initial catalyst for repository interoperability. However, there is now a rising interest in repositories no longer being stat...

  7. International Conference on water reuse and desalination

    International Nuclear Information System (INIS)

    1984-01-01

    The International conference on water reuse and desalination was held on the 13 November 1984 in Johannesburg, South Africa. Papers delivered on this conference covered the following aspects: desalination technology, industrial effluent control, economics of desalination of wastewaters, consumable supplies in desalination, the world market for seawater desalination equipment, reverse osmosis, evaporation and ultrafiltration, treatment of hazardous wastes, role of reverse osmosis in waste water treatment, as well as the desalination, recovery and recycle of water with high efficiency. A paper was also delivered on the mechanical vapour compression process applied to seawater desalination - as an example the paper presents the largest unit so far constructed by SIDEM using this process: a 1,500 mz/day unit installed in the Nuclear power plant of Flamanville in France

  8. Water conservation, recycling, and reuse: US northeast

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, E.

    1984-10-01

    This paper focuses upon present and future possibilities for water conservation, recycling, and reuse in New England and Middle Atlantic states. Telephone interviews and questionnaires sent to trade associations, public utility commissions, federal, state and other agencies were used to supplement information gathered in the literature. Water intake and consumptive demands in 1980 were calculated for industrial, electric utility, agricultural, and residential sectors. Corresponding information for the year 2000 were estimated using data from utilities, public utility commissions, and the US Bureau of Economic Affairs. Water supplies were estimated using the concept of safe yield. Assuming reductions in water use by industries, agriculture and by private residences in the year 2000, it was found that many users, particularly the electric utility sector, would still experience serious water supply shortfalls in several industrialized states. 20 references, 14 tables.

  9. Application of solar energy in water reuse

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, G.

    1987-01-01

    The application of photocatalysed oxidation in water reuse technology is described. Results with a sequencing batch reactor showed that 4 hours contact of the raw sewage with 0.5 mg dye sorbed g/sup -1/ fly ash in sunlight, under experimental conditions, significantly reduced the organic and bacteriological load and rendered it fit for use in irrigation or for discharge. The effect of variables such as contact time or amount of dye sorbed on COD, MBAS and MPN counts were investigated and the results interpreted in terms of enhanced photoactivity and biodegradation in the sorbed state. The process appears to be well suited to commercial exploitation as it is safe, quick and economical.

  10. Ultrafiltration to reuse laundering wash water

    DEFF Research Database (Denmark)

    Giagnorio, Mattia; Søtoft, Lene Fjerbæk; Tiraferri, Alberto

    2017-01-01

    Laundering industry consumes and discharges large amounts of water and surfactants, and the demand of surface active agents used for washing is increasing worldwide. Some of these substances are considered contaminants of emerging concern, as they persist in the environment. This work aimed...... at evaluating the feasibility of ultrafiltration as a method to treat the wash wastewater and possibly reuse the surfactant-rich permeate stream in laundry facilities. In particular, evaluation of surfactant recovery was performed through analysis of the permeate flux and properties obtained through polymeric...... and ceramic membranes. Wash water samples were collected at an industrial laundering facility for hospital linen and filtered through different ultrafiltration membranes with varying molecular weight cut-off. The critical micelle concentration of the detergent was quantified, and capillarity measurements were...

  11. Designing for Reuse of Configurable Logic

    National Research Council Canada - National Science Library

    Elm, Joseph P

    2005-01-01

    Field-programmable gate arrays (FPGAs) offer electronic systems designers the opportunity to reduce development cost, reduce time-to-market, increase system performance, and improve system adaptability...

  12. An Empirical Agent-Based Model to Simulate the Adoption of Water Reuse Using the Social Amplification of Risk Framework.

    Science.gov (United States)

    Kandiah, Venu; Binder, Andrew R; Berglund, Emily Z

    2017-10-01

    Water reuse can serve as a sustainable alternative water source for urban areas. However, the successful implementation of large-scale water reuse projects depends on community acceptance. Because of the negative perceptions that are traditionally associated with reclaimed water, water reuse is often not considered in the development of urban water management plans. This study develops a simulation model for understanding community opinion dynamics surrounding the issue of water reuse, and how individual perceptions evolve within that context, which can help in the planning and decision-making process. Based on the social amplification of risk framework, our agent-based model simulates consumer perceptions, discussion patterns, and their adoption or rejection of water reuse. The model is based on the "risk publics" model, an empirical approach that uses the concept of belief clusters to explain the adoption of new technology. Each household is represented as an agent, and parameters that define their behavior and attributes are defined from survey data. Community-level parameters-including social groups, relationships, and communication variables, also from survey data-are encoded to simulate the social processes that influence community opinion. The model demonstrates its capabilities to simulate opinion dynamics and consumer adoption of water reuse. In addition, based on empirical data, the model is applied to investigate water reuse behavior in different regions of the United States. Importantly, our results reveal that public opinion dynamics emerge differently based on membership in opinion clusters, frequency of discussion, and the structure of social networks. © 2017 Society for Risk Analysis.

  13. Beneficial Re-use of Decommissioned Former Nuclear Facilities

    International Nuclear Information System (INIS)

    Boing, L.E.

    1997-01-01

    With the decision to decommission a nuclear facility, it is necessary to evaluate whether to fully demolish a facility or to re-use the facility in some capacity. This evaluation is often primarily driven by both the past mission of the site and the facility and the site's perceived future mission. In the case where the facility to be decommissioned is located within a large research or industrial complex and represents a significant resource to the site's future mission, it may be a perfect candidate to be re-used in some fashion. However, if the site is a rather remote older facility with little chance of being modified to today's standards for its re-use, the chances for its re-use will be substantially reduced. In this presentation, some specific cases of former nuclear facilities being decommissioned and re-used will be reviewed and some factors required to be considered in making this decision will be reviewed

  14. Generalising via the Case Studies and Adapting the Oil and Gas Industry's Project Execution Concepts to the Construction Industry

    OpenAIRE

    Mejlænder-Larsen, Øystein

    2015-01-01

    The aim of this paper is to explore whether it is possible to generalise findings on project execution in the oil and gas industryrelated to the use of project execution models and a 3D design environment, based on case study research. Besides, sufficientsimilarities between the two industries were assessed and the applicability of the findings from the cases in the oil and gasindustry was assessed. The selected cases (the ongoing ...

  15. Irrigation Water Quality Standards for Indirect Wastewater Reuse in Agriculture: A Contribution toward Sustainable Wastewater Reuse in South Korea

    Directory of Open Access Journals (Sweden)

    Hanseok Jeong

    2016-04-01

    Full Text Available Climate change and the subsequent change in agricultural conditions increase the vulnerability of agricultural water use. Wastewater reuse is a common practice around the globe and is considered as an alternative water resource in a changing agricultural environment. Due to rapid urbanization, indirect wastewater reuse, which is the type of agricultural wastewater reuse that is predominantly practiced, will increase, and this can cause issues of unplanned reuse. Therefore, water quality standards are needed for the safe and sustainable practice of indirect wastewater reuse in agriculture. In this study, irrigation water quality criteria for wastewater reuse were discussed, and the standards and guidelines of various countries and organizations were reviewed to suggest preliminary standards for indirect wastewater reuse in South Korea. The proposed standards adopted a probabilistic consideration of practicality and classified the use of irrigation water into two categories: upland and rice paddy. The standards suggest guidelines for E. coli, electric conductivity (EC, turbidity, suspended solids (SS, biochemical oxygen demand (BOD, pH, odor, and trace elements. Through proposing the standards, this study attempts to combine features of both the conservative and liberal approaches, which in turn could suggest a new and sustainable practice of agricultural wastewater reuse.

  16. Advancing data reuse in phyloinformatics using an ontology-driven Semantic Web approach.

    Science.gov (United States)

    Panahiazar, Maryam; Sheth, Amit P; Ranabahu, Ajith; Vos, Rutger A; Leebens-Mack, Jim

    2013-01-01

    Phylogenetic analyses can resolve historical relationships among genes, organisms or higher taxa. Understanding such relationships can elucidate a wide range of biological phenomena, including, for example, the importance of gene and genome duplications in the evolution of gene function, the role of adaptation as a driver of diversification, or the evolutionary consequences of biogeographic shifts. Phyloinformaticists are developing data standards, databases and communication protocols (e.g. Application Programming Interfaces, APIs) to extend the accessibility of gene trees, species trees, and the metadata necessary to interpret these trees, thus enabling researchers across the life sciences to reuse phylogenetic knowledge. Specifically, Semantic Web technologies are being developed to make phylogenetic knowledge interpretable by web agents, thereby enabling intelligently automated, high-throughput reuse of results generated by phylogenetic research. This manuscript describes an ontology-driven, semantic problem-solving environment for phylogenetic analyses and introduces artefacts that can promote phyloinformatic efforts to promote accessibility of trees and underlying metadata. PhylOnt is an extensible ontology with concepts describing tree types and tree building methodologies including estimation methods, models and programs. In addition we present the PhylAnt platform for annotating scientific articles and NeXML files with PhylOnt concepts. The novelty of this work is the annotation of NeXML files and phylogenetic related documents with PhylOnt Ontology. This approach advances data reuse in phyloinformatics.

  17. A 540-[Formula: see text] Duty Controlled RSSI With Current Reusing Technique for Human Body Communication.

    Science.gov (United States)

    Jang, Jaeeun; Lee, Yongsu; Cho, Hyunwoo; Yoo, Hoi-Jun

    2016-08-01

    An ultra-low-power duty controlled received signal strength indicator (RSSI) is implemented for human body communication (HBC) in 180 nm CMOS technology under 1.5 V supply. The proposed RSSI adopted 3 following key features for low-power consumption; 1) current reusing technique (CR-RSSI) with replica bias circuit and calibration unit, 2) duty controller, and 3) reconfigurable gm-boosting LNA. The CR-RSSI utilizes stacked amplifier-rectifier-cell (AR-cell) to reuse the supply current of each blocks. As a result, the power consumption becomes 540 [Formula: see text] with +/-2 dB accuracy and 75 dB dynamic range. The replica bias circuit and calibration unit are adopted to increase the reliability of CR-RSSI. In addition, the duty controller turns off the RSSI when it is not required, and this function leads 70% power reduction. At last, the gm-boosting reconfigurable LNA can adaptively vary its noise and linearity performance with respect to input signal strength. Fro current reusing technique m this feature, we achieve 62% power reduction in the LNA. Thanks to these schemes, compared to the previous works, we can save 70% of power in RSSI and LNA.

  18. Transcultural adaptation and psychometric properties of Spanish version of Pregnancy Physical Activity Questionnaire: the PregnActive project.

    Science.gov (United States)

    Oviedo-Caro, Miguel Ángel; Bueno-Antequera, Javier; Munguía-Izquierdo, Diego

    2018-03-19

    To transculturally adapt the Spanish version of Pregnancy Physical Activity Questionnaire (PPAQ) analyzing its psychometric properties. The PPAQ was transculturally adapted into Spanish. Test-retest reliability was evaluated in a subsample of 109 pregnant women. The validity was evaluated in a sample of 208 pregnant women who answered the questionnaire and wore the multi-sensor monitor for 7 valid days. The reliability (intraclass correlation coefficient), concordance (concordance correlation coefficient), correlation (Pearson correlation coefficient), agreement (Bland-Altman plots) and relative activity levels (Jonckheere-Terpstra test) between both administrations and methods were examined. Intraclass correlation coefficients between both administrations were good for all categories except transportation. A low but significant correlation was found for total activity (light and above) whereas no correlation was found for other intensities between both methods. Relative activity levels analysis showed a significant linear trend for increased total activity between both methods. Spanish version of PPAQ is a brief and easily interpretable questionnaire with good reliability and ability to rank individuals, and poor validity compared with multi-sensor monitor. The use of PPAQ provides information of pregnancy-specific activities in order to establish physical activity levels of pregnant women and adapt health promotion interventions. Copyright © 2018 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  19. New techniques to control salinity-wastewater reuse interactions in golf courses of the Mediterranean regions

    Science.gov (United States)

    Beltrao, J.; Costa, M.; Rosado, V.; Gamito, P.; Santos, R.; Khaydarova, V.

    2003-04-01

    Due to the lack water around the Mediterranean regions, potable water luxurious uses - as in golf courses - are increasingly contested. In order to solve this problem, non conventional water resources (effluent, gray, recycled, reclaimed, brackish), like treated wastewater, for irrigation gained increasing role in the planning and development of additional water supplies in golf courses. In most cases, the intense use of effluent for irrigation attracted public awareness in respect of contaminating pathogens and heavy metals. The contaminating effect of salinity in soil and underground water is very often neglected. The objective of this work is to present the conventional techniques to control salinity of treated wastewater and to present some results on new clean techniques to solve this problem, in the framework of the INCO-COPERNICUS project (no. IC-15CT98-0105) "Adaptation of Efficient Water Use Criteria in Marginal Regions of Europe and Middle Asia with Scarce Sources Subject to Environmental Control, Climate Change and Socio-Economic Development" and of the INCO-DC project (no. IC18-CT98-0266) "Control of Salination and Combating Desertification Effects in the Mediterranean Region. Phase II". Saline water is the most common irrigation water in arid climates. Moreover, for each region treated wastewater is always more saline than tap water, and therefore, when treated wastewater is reused in golf courses, more salinity problems occur. Conventional techniques to combat the salination process in golf courses can be characterized by four generations: 1) Problem of root zone salination by soil leaching - two options can occur - when there is an impermeable layer, salts will be concentrated above this layer; on the other hand, when there is no impermeable layer, aquifers contamination can be observed; 2) Use of subsurface trickle irrigation - economy of water, and therefore less additional salts; however the problem of groundwater contamination due to natural rain

  20. Dialyzer Reuse and Outcomes of High Flux Dialysis.

    Directory of Open Access Journals (Sweden)

    Christos Argyropoulos

    Full Text Available The bulk of randomized trial evidence for the expanding use of High Flux (HF hemodialysis worldwide comes from two randomized controlled trials, one of which (HEMODIALYSIS, HEMO allowed, while the other (Membrane Outcomes Permeability, MPO excluded, the reuse of membranes. It is not known whether dialyzer reuse has a differential impact on outcomes with HF vs low flyx (LF dialyzers.Proportional Hazards Models and Joint Models for longitudinal measures and survival outcomes were used in HEMO to analyze the relationship between β2-microglobulin (β2M concentration, flux, and reuse. Meta-analysis and regression techniques were used to synthesize the evidence for HF dialysis from HEMO and MPO.In HEMO, minimally reused (< 6 times HF dialyzers were associated with a hazard ratio (HR of 0.67 (95% confidence interval, 95%CI: 0.48-0.92, p = 0.015, 0.64 (95%CI: 0.44 - 0.95, p = 0.03, 0.61 (95%CI: 0.41 - 0.90, p = 0.012, 0.53 (95%CI: 0.28 - 1.02, p = 0.057 relative to minimally reused LF ones for all cause, cardiovascular, cardiac and infectious mortality respectively. These relationships reversed for extensively reused membranes (p for interaction between reuse and flux < 0.001, p = 0.005 for death from all cause and cardiovascular causes, while similar trends were noted for cardiac and infectious mortality (p of interaction between reuse and flux of 0.10 and 0.08 respectively. Reduction of β2M explained only 1/3 of the effect of minimally reused HF dialyzers on all cause mortality, while non-β2M related factors explained the apparent attenuation of the benefit with more extensively reused dialyzers. Meta-regression of HEMO and MPO estimated an adjusted HR of 0.63 (95% CI: 0.51-0.78 for non-reused HF dialyzers compared with non-reused LF membranes.This secondary analysis and synthesis of two large hemodialysis trials supports the widespread use of HF dialyzers in clinical hemodialysis over the last decade. A mechanistic understanding of the effects of

  1. Approach to the health-risk management on municipal reclaimed water reused in landscape water system

    Science.gov (United States)

    Liu, X.; Li, J.; Liu, W.

    2008-12-01

    Water pollution and water heavily shortage are both main environmental conflicts in China. Reclaimed water reuse is an important approach to lessen water pollution and solve the water shortage crisis in the city. The heath risk of reclaimed water has become the focus of the public. It is impending to evaluate the health risk of reclaimed water with risk assessment technique. Considering the ways of the reclaimed water reused, it is studied that health risk produced by toxic pollutants and pathogenic microbes in the processes of reclaimed water reused in landscape water system. The pathogenic microbes monitoring techniques in wastewater and reclaimed water are discussed and the hygienic indicators, risk assessment methods, concentration limitations of pathogenic microbes for various reclaimed water uses are studied. The principle of health risk assessment is used to research the exposure level and the health risk of concerned people in a wastewater reuse project where the reclaimed water is applied for green area irrigation in a public park in Beijing. The exposure assessment method and model of various reclaimed water uses are built combining with Beijing reclaimed water project. Firstly the daily ingesting dose and lifetime average daily dose(LADD) of exposure people are provided via field work and monitoring analysis, which could be used in health risk assessment as quantitative reference. The result shows that the main risk comes from the pathology pollutants, the toxic pollutants, the eutrophication pollutants, pathogenic microbes and the secondary pollutants when municipal wastewater is reclaimed for landscape water. The major water quality limited should include pathogenic microbes, toxic pollutants, and heavy metals. Keywords: municipal wastewater, reclaimed water, landscape water, health risk

  2. Integrating Laser Scanner and Bim for Conservation and Reuse: "the Lyric Theatre of Milan"

    Science.gov (United States)

    Utica, G.; Pinti, L.; Guzzoni, L.; Bonelli, S.; Brizzolari, A.

    2017-12-01

    The paper underlines the importance to apply a methodology that integrates the Building Information Modeling (BIM), Work Breakdown Structure (WBS) and the Laser Scanner tool in conservation and reuse projects. As it is known, the laser scanner technology provides a survey of the building object which is more accurate rather than that carried out using traditional methodologies. Today most existing buildings present their attributes in a dispersed way, stored and collected in paper documents, in sheets of equipment information, in file folders of maintenance records. In some cases, it is difficult to find updated technical documentation and the research of reliable data can be a cost and time-consuming process. Therefore, this new survey technology, embedded with BIM systems represents a valid tool to obtain a coherent picture of the building state. The following case consists in the conservation and reuse project of Milan Lyric Theatre, started in 2013 from the collaboration between the Milan Polytechnic and the Municipality. This project first attempts to integrate these new techniques which are already professional standards in many other countries such as the US, Norway, Finland, England and so on. Concerning the methodology, the choice has been to use BIM software for the structured analysis of the project, with the aim to define a single code of communication to develop a coherent documentation according to rules in a consistent manner and in tight schedules. This process provides the definition of an effective and efficient operating method that can be applied to other projects.

  3. Multi-Fault Diagnosis of Rolling Bearings via Adaptive Projection Intrinsically Transformed Multivariate Empirical Mode Decomposition and High Order Singular Value Decomposition.

    Science.gov (United States)

    Yuan, Rui; Lv, Yong; Song, Gangbing

    2018-04-16

    Rolling bearings are important components in rotary machinery systems. In the field of multi-fault diagnosis of rolling bearings, the vibration signal collected from single channels tends to miss some fault characteristic information. Using multiple sensors to collect signals at different locations on the machine to obtain multivariate signal can remedy this problem. The adverse effect of a power imbalance between the various channels is inevitable, and unfavorable for multivariate signal processing. As a useful, multivariate signal processing method, Adaptive-projection has intrinsically transformed multivariate empirical mode decomposition (APIT-MEMD), and exhibits better performance than MEMD by adopting adaptive projection strategy in order to alleviate power imbalances. The filter bank properties of APIT-MEMD are also adopted to enable more accurate and stable intrinsic mode functions (IMFs), and to ease mode mixing problems in multi-fault frequency extractions. By aligning IMF sets into a third order tensor, high order singular value decomposition (HOSVD) can be employed to estimate the fault number. The fault correlation factor (FCF) analysis is used to conduct correlation analysis, in order to determine effective IMFs; the characteristic frequencies of multi-faults can then be extracted. Numerical simulations and the application of multi-fault situation can demonstrate that the proposed method is promising in multi-fault diagnoses of multivariate rolling bearing signal.

  4. Dialyzer Reuse with Peracetic Acid Does Not Impact Patient Mortality

    Science.gov (United States)

    Bond, T. Christopher; Krishnan, Mahesh; Wilson, Steven M.; Mayne, Tracy

    2011-01-01

    Summary Background and objectives Numerous studies have shown the overall benefits of dialysis filter reuse, including superior biocompatibility and decreased nonbiodegradable medical waste generation, without increased risk of mortality. A recent study reported that dialyzer reprocessing was associated with decreased patient survival; however, it did not control for sources of potential confounding. We sought to determine the effect of dialyzer reprocessing with peracetic acid on patient mortality using contemporary outcomes data and rigorous analytical techniques. Design, setting, participants, & measurements We conducted a series of analyses of hemodialysis patients examining the effects of reuse on mortality using three techniques to control for potential confounding: instrumental variables, propensity-score matching, and time-dependent survival analysis. Results In the instrumental variables analysis, patients at high reuse centers had 16.2 versus 15.9 deaths/100 patient-years in nonreuse centers. In the propensity-score matched analysis, patients with reuse had a lower death rate per 100 patient-years than those without reuse (15.2 versus 15.5). The risk ratios for the time-dependent survival analyses were 0.993 (per percent of sessions with reuse) and 0.995 (per unit of last reuse), respectively. Over the study period, 13.8 million dialyzers were saved, representing 10,000 metric tons of medical waste. Conclusions Despite the large sample size, powered to detect miniscule effects, neither the instrumental variables nor propensity-matched analyses were statistically significant. The time-dependent survival analysis showed a protective effect of reuse. These data are consistent with the preponderance of evidence showing reuse limits medical waste generation without negatively affecting clinical outcomes. PMID:21566107

  5. Fusion power plant for water desalination and reuse

    International Nuclear Information System (INIS)

    Borisov, A.A.; Desjatov, A.V.; Izvolsky, I.M.; Serikov, A.G.; Smirnov, V.P.; Smirnov, Yu.N.; Shatalov, G.E.; Sheludjakov, S.V.; Vasiliev, N.N.; Velikhov, E.P.

    2001-01-01

    Development of industry and agriculture demands a huge fresh water consumption. Exhaust of water sources together with pollution arises a difficult problem of population, industry, and agriculture water supply. Request for additional water supply in next 50 years is expected from industrial and agricultural sectors of many countries in the world. The presented study of fusion power plant for water desalination and reuse is aimed to widen a range of possible fusion industrial applications. Fusion offers a safe, long-term source of energy with abundant resources and major environmental advantages. Thus fusion can provide an attractive energy option to society in the next century. Fusion power tokamak reactor based on RF DEMO-S project [Proc. ISFNT-5 (2000) in press; Conceptual study of RF DEMO-S fusion reactor (2000)] was chosen as an energy source. A steady state operation mode is considered with thermal power of 4.0 GW. The reactor has to operate in steady-state plasma mode with high fraction of bootstrap current. Average plant availability of ∼0.7 is required. A conventional type of water cooled blanket is the first choice, helium or lithium coolants are under consideration. Desalination plant includes two units: reverse osmosis and distillation. Heat to electricity conversion schemes is optimized fresh water production and satisfy internal plant electricity demand The plant freshwater capacity is ∼6000000 m 3 per day. Fusion power plant of this capacity can provide a region of a million populations with fresh water, heat and electricity

  6. Clean-out and Reuse of GCEP Facilities at Portsmouth

    International Nuclear Information System (INIS)

    Franz, William; Hickman, Mark; Wiehle, Kristi

    2008-01-01

    PORTS began operations in 1956 to enrich uranium for both civilian and military use. It operated under Goodyear Atomic Corporation and Lockheed-Martin as a government-owned contractor-operated facility until the formation of the United States Enrichment Corporation (USEC) as a government corporation in 1993. In 1998, USEC was privatized as a publicly traded corporation. USEC leases the Portsmouth and Paducah GDPs from the U.S. Department of Energy (DOE). Enrichment operations were terminated at Portsmouth in 2001, although USEC continues to lease and maintain the Portsmouth GDP in Cold Shutdown and conduct some DOE projects there. LPP found that removal of old equipment to allow reuse of a facility can present unexpected challenges. Classified components create significant logistics issues. In this case, teamwork and attention to detail by USEC, LATA/Parallax, and DOE resulted in solutions and success. Lessons learnt: - Transportation logistics are particularly important when shipping waste streams with special requirements. - Investment in extra equipment yields tangible benefits where other resources (cleared drivers) are scarce. - An early start to providing specially qualified drivers, in this case providing security clearances, is essential. Availability is limited, and the time required to qualify new drivers may be lengthy. - A dedicated communications station, rather than reliance on existing resources (shift superintendent), is invaluable

  7. Fusion power plant for water desalination and reuse

    Energy Technology Data Exchange (ETDEWEB)

    Borisov, A.A.; Desjatov, A.V.; Izvolsky, I.M.; Serikov, A.G.; Smirnov, V.P.; Smirnov, Yu.N.; Shatalov, G.E.; Sheludjakov, S.V.; Vasiliev, N.N. E-mail: vasiliev@nfi.kiae.ru; Velikhov, E.P

    2001-11-01

    Development of industry and agriculture demands a huge fresh water consumption. Exhaust of water sources together with pollution arises a difficult problem of population, industry, and agriculture water supply. Request for additional water supply in next 50 years is expected from industrial and agricultural sectors of many countries in the world. The presented study of fusion power plant for water desalination and reuse is aimed to widen a range of possible fusion industrial applications. Fusion offers a safe, long-term source of energy with abundant resources and major environmental advantages. Thus fusion can provide an attractive energy option to society in the next century. Fusion power tokamak reactor based on RF DEMO-S project [Proc. ISFNT-5 (2000) in press; Conceptual study of RF DEMO-S fusion reactor (2000)] was chosen as an energy source. A steady state operation mode is considered with thermal power of 4.0 GW. The reactor has to operate in steady-state plasma mode with high fraction of bootstrap current. Average plant availability of {approx}0.7 is required. A conventional type of water cooled blanket is the first choice, helium or lithium coolants are under consideration. Desalination plant includes two units: reverse osmosis and distillation. Heat to electricity conversion schemes is optimized fresh water production and satisfy internal plant electricity demand The plant freshwater capacity is {approx}6000000 m{sup 3} per day. Fusion power plant of this capacity can provide a region of a million populations with fresh water, heat and electricity.

  8. Targeting heat recovery and reuse in industrial zone

    Directory of Open Access Journals (Sweden)

    Zarić Milana M.

    2017-01-01

    Full Text Available In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop an approach to increase energy efficiency of an industrial zone by recovering and reusing waste heat via indirect heat integration. Industrial zones usually consist of multiple independent plants, where each plant is supplied by an independent utility system, as a decentralized system. In this study, a new approach is developed to target minimum energy requirements where an industrial zone would be supplied by a centralized utility system instead of decentralized utility system. The approach assumes that all process plants in an industrial zone are linked through the central utility system. This method is formulated as a linear programming problem (LP. Moreover, the proposed method may be used for decision making related to energy integration strategy of an industrial zone. In addition, the proposed method was applied on a case study. The results revealed that saving of fossil fuel could be achieved. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI172063

  9. Adaptation of lessons learned from the Eurotunnel Project and CDM magnet production to super collider main ring installation

    International Nuclear Information System (INIS)

    Belding, J.; Di Domenico, P.; Gillin, J.; Hahn, W.; Naventi, R.; Nielsen, M.; Seely, M.; Hopkins, J.; Patterson, L.R.

    1994-01-01

    This paper will present preliminary findings from the Phase I Collider Installation contract studies performed by the Bechtel/General Dynamics/Belding Team related to the installation of technical systems for the SSC main ring north and south arcs. Specific focus is given to the adaptation of lessons learned during construction of the Eurotunnel, including equipment and personnel logistics and transportation. The incorporation of Collider Dipole Magnet manufacturing techniques and process methodologies as related to the handling and interconnection of main ring components is also discussed

  10. Management optimization in Thermal complex through water reuse

    International Nuclear Information System (INIS)

    De Souza, S.; Manganelli, A.; Bertolotto, J.; Leys, P.; Garcia, B.

    2004-01-01

    Water reuse involves the concept of the exploitation of a previously used water, for a new, beneficial purpose. Actually, in Uruguay, thermal water is just utilised for balneological purposes, in this paper is proposed the water reuse taking the excess of used swimming pool water, and using it for heating and greenhouse irrigation, and australian lobster breeding. An important aspect of sustainable thermal water management is the protection of the exploted thermal water resources, so water reuse plays an important role in water resource, and ecosystem management, because it reduces the volume discharged and also reduces the risk of thermal pollution [es

  11. Recycling, reducing and reusing: A theoretical framework

    International Nuclear Information System (INIS)

    Kubursi, A.A.; Butterfield, D.W.

    1990-01-01

    Macroeconomic models are generally based on a particular national income accounting framework. The current approach treats waste and pollution generation in such a way that any increase in these activities increases directly the gross domestic product of the economy. A reformulation is suggested for the accounting framework so as to treat waste management and pollution abatement as services to business whose costs should be charged against business revenue. Even such costs to households may be considered as costs to output. In this way such expenses appear as a cost to society and not as a final output. A new theoretical framework is developed to correspond to the reformulated accounting principle that allows clear identification of recycling activity and waste management. The rectangular input-output framework is particularly suited for this treatment as it allows different industries to produce the same output and identifies different commodities as inputs in the production of the same output. With the new framework, it is possible to examine the socioeconomic consequences of increased use and production of recyclables. Equally important is the ability to assess the relative efficiency of alternative policies to reuse or reduce the use of products and resources through price incentives and full cost charges. 2 tabs

  12. Centralised urban stormwater harvesting for potable reuse.

    Science.gov (United States)

    McArdle, P; Gleeson, J; Hammond, T; Heslop, E; Holden, R; Kuczera, G

    2011-01-01

    Urban impervious areas provide a guaranteed source of runoff, especially in cities with high rainfall - this represents a source of water with low sensitivity to unfavourable climate change. Whilst the potential to reuse stormwater has long been recognised, its quality has largely limited usage to non-potable applications requiring the use of a third-pipe network, a prohibitively expensive option in established urban areas. Given recent advances in membrane filtration, this study investigates the potential of harvesting and treating stormwater to a potable standard to enable use of the potable distribution network. A case study based on the Throsby Creek catchment in Newcastle explores the issue. The high seasonally uniform rainfall provides insight into the maximum potential of such an option. Multicriterion optimisation was used to identify Pareto optimal solutions for harvesting, storing and treating stormwater. It is shown that harvesting and treating stormwater from a 13 km² catchment can produce yields ranging from 8.5 to 14.2 ML/day at costs ranging from AU$2.60/kL to AU$2.89/kL, which may become viable as the cost of traditional supply continues to grow. However, there are significant social impacts to deal with including alienation of public land for storage and community acceptance of treated stormwater.

  13. Development of decommissioning, decontamination and reuse technology for nuclear facilities

    International Nuclear Information System (INIS)

    Lee, K. W.; Moon, J. K.; Choi, B. S.

    2012-03-01

    In this project, the foundation of decommissioning technology through the development of core technologies applied to maintenance and decommissioning of nuclear facility was established. First of all, we developed the key technology such as safety assessment technology for decommissioning work needed at the preparatory stage of decommissioning of the highly contaminated facilities and simultaneous measurement technology of the high-level alpha/beta contamination applicable to the operation and decommissioning of the nuclear facilities. Second, we developed a remotely controlled laser ablation decontamination system which is useful for a removal of fixed contaminants and developed a chemical gel decontamination technology for a removal of non-fixed contaminants during the maintenance and decommissioning works of high radiation hot cells which have been used for a recycling or treatment of spent fuels. Third, we developed a volume reduction and self-disposal technology for dismantled concrete wastes. Also, the technology for volume reduction and stabilization of the peculiar wastes(HEPA filter and organic mixed wastes), which have been known to be very difficult to treat and manage, generated from the high radioactive facilities in operation, improvement and repair and under decommissioning was developed. Finally, this research project was developed a system for the reduction of radiotoxicity of several uranium mixtures generated in the front- and back-end nuclear fuel cycles with characteristics of highly enhanced proliferation-resistance and more environmental friendliness, which can make the uranium to be recovered or separated from the mixtures with a high purity level enough for the uranium to be reused and to be classified as C-class level for burial near the surface, and then which result in the much reduction in volume of the uranium mixture wastes

  14. Adaptive Lighting

    DEFF Research Database (Denmark)

    Petersen, Kjell Yngve; Kongshaug, Jesper; Søndergaard, Karin

    2015-01-01

    offered by adaptive lighting control are created by the ways that the system components, the network and data flow can be coordinated through software so that the dynamic variations are controlled in ways that meaningfully adapt according to people’s situations and design intentions. This book discusses...... to be static, and no longer acts as a kind of spatial constancy maintaining stability and order? Moreover, what new potentials open in lighting design? This book is one of four books that is published in connection with the research project entitled LED Lighting; Interdisciplinary LED Lighting Research...

  15. A Community-Driven Workflow Recommendation and Reuse Infrastructure

    Data.gov (United States)

    National Aeronautics and Space Administration — Promote and encourage process and workflow reuse  within NASA Earth eXchange (NEX) by developing a proactive recommendation technology based on collective NEX user...

  16. Reuse of wastewater in urban farming and urban planning ...

    African Journals Online (AJOL)

    ISHIOMA

    status of wastewater reuse in urban farming in Katsina, an important urban area in the semi arid ... officially registered with the Katsina Urban Planning Authority. ..... crop production in the water-short Guanajuato river basin. Mexico. Res. Rep.

  17. Assessment of Cryptosporidium in wastewater reuse for drinking ...

    African Journals Online (AJOL)

    Assessment of Cryptosporidium in wastewater reuse for drinking water ... water supply needs and/or to reduce costs in many communities around the world. ... in a treatment plant geared for the production of drinking water from wastewater ...

  18. Re-use of seedling containers and Fusarium circinatum association ...

    African Journals Online (AJOL)

    Re-use of seedling containers and Fusarium circinatum association with asymptomatic Pinus patula planting stock. Andrew R Morris, Gerda Fourie, Izette Greyling, Emma T Steenkamp, Nicoletta B Jones ...

  19. Trombay symposium on desalination and water reuse: proceedings

    International Nuclear Information System (INIS)

    2007-02-01

    Trombay Symposium on Desalination and Water Reuse (TSDWR-07) addresses the issues related to desalination and water reuse including integrated water resource management. It aims to bring together the desalination and water purification technologists from government R and D, academia, industry and representatives from NGOs and user groups including policy makers. The papers received cover a wide range of topics from water resource management to different aspects of desalination and water purification. Papers relevant to INIS are indexed separately

  20. A Text Mining Approach for Extracting Lessons Learned from Project Documentation: An Illustrative Case Study

    Directory of Open Access Journals (Sweden)

    Benjamin Matthies

    2017-12-01

    Full Text Available Lessons learned are important building blocks for continuous learning in project-based organisations. Nonetheless, the practical reality is that lessons learned are often not consistently reused for organisational learning. Two problems are commonly described in this context: the information overload and the lack of procedures and methods for the assessment and implementation of lessons learned. This paper addresses these problems, and appropriate solutions are combined in a systematic lesson learned process. Latent Dirichlet Allocation is presented to solve the first problem. Regarding the second problem, established risk management methods are adapted. The entire lessons learned process will be demonstrated in a practical case study

  1. Integrated urban water management for residential areas: a reuse model.

    Science.gov (United States)

    Barton, A B; Argue, J R

    2009-01-01

    Global concern over growing urban water demand in the face of limited water resources has focussed attention on the need for better management of available water resources. This paper takes the "fit for purpose" concept and applies it in the development of a model aimed at changing current practices with respect to residential planning by integrating reuse systems into the design layout. This residential reuse model provides an approach to the design of residential developments seeking to maximise water reuse. Water balance modelling is used to assess the extent to which local water resources can satisfy residential demands with conditions based on the city of Adelaide, Australia. Physical conditions include a relatively flat topography and a temperate climate, with annual rainfall being around 500 mm. The level of water-self-sufficiency that may be achieved within a reuse development in this environment is estimated at around 60%. A case study is also presented in which a conventional development is re-designed on the basis of the reuse model. Costing of the two developments indicates the reuse scenario is only marginally more expensive. Such costings however do not include the benefit to upstream and downstream environments resulting from reduced demand and discharges. As governments look to developers to recover system augmentation and environmental costs the economics of such approaches will increase.

  2. Scenario of solid waste reuse in Khulna city of Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Bari, Quazi H., E-mail: qhbari@yahoo.com [Department of Civil Engineering, Khulna University of Engineering and Technology, Khulna 9203 (Bangladesh); Mahbub Hassan, K. [Department of Civil Engineering, Khulna University of Engineering and Technology, Khulna 9203 (Bangladesh); Haque, R. [Project Builders Ltd., Dhaka 1000 (Bangladesh)

    2012-12-15

    The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d{sup -1} solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.

  3. Optimal waste heat recovery and reuse in industrial zones

    International Nuclear Information System (INIS)

    Stijepovic, Mirko Z.; Linke, Patrick

    2011-01-01

    Significant energy efficiency gains in zones with concentrated activity from energy intensive industries can often be achieved by recovering and reusing waste heat between processing plants. We present a systematic approach to target waste heat recovery potentials and design optimal reuse options across plants in industrial zones. The approach first establishes available waste heat qualities and reuse feasibilities considering distances between individual plants. A targeting optimization problem is solved to establish the maximum possible waste heat recovery for the industrial zone. Then, a design optimization problem is solved to identify concrete waste heat recovery options considering economic objectives. The paper describes the approach and illustrates its application with a case study. -- Highlights: → Developed a systematic approach to target waste heat recovery potentials and to design optimal recovery and reuse options across plants in industrial zones. → Five stage approach involving data acquisition, analysis, assessment, targeting and design. → Targeting optimization problem establishes the maximum possible waste heat recovery and reuse limit for the industrial zone. → Design optimization problem provides concrete waste heat recovery and reuse network design options considering economic objectives.

  4. Public responses to water reuse - Understanding the evidence.

    Science.gov (United States)

    Smith, H M; Brouwer, S; Jeffrey, P; Frijns, J

    2018-02-01

    Over the years, much research has attempted to unpack what drives public responses to water reuse, using a variety of approaches. A large amount of this work was captured by an initial review that covered research undertaken up to the early 2000s (Hartley, 2006). This paper showcases post-millennium evidence and thinking around public responses to water reuse, and highlights the novel insights and shifts in emphasis that have occurred in the field. Our analysis is structured around four broad, and highly interrelated, strands of thinking: 1) work focused on identifying the range of factors that influence public reactions to the concept of water reuse, and broadly looking for associations between different factors; 2) more specific approaches rooted in the socio-psychological modelling techniques; 3) work with a particular focus on understanding the influences of trust, risk perceptions and affective (emotional) reactions; and 4) work utilising social constructivist perspectives and socio-technical systems theory to frame responses to water reuse. Some of the most significant advancements in thinking in this field stem from the increasingly sophisticated understanding of the 'yuck factor' and the role of such pre-cognitive affective reactions. These are deeply entrenched within individuals, but are also linked with wider societal processes and social representations. Work in this area suggests that responses to reuse are situated within an overall process of technological 'legitimation'. These emerging insights should help stimulate some novel thinking around approaches to public engagement for water reuse. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Scenario of solid waste reuse in Khulna city of Bangladesh

    International Nuclear Information System (INIS)

    Bari, Quazi H.; Mahbub Hassan, K.; Haque, R.

    2012-01-01

    The reuse and recycling of waste materials are now sincerely considered to be an integral part of solid waste management in many parts of the world. In this context, a vast number of options ranging from small scale decentralized to larger scale centralized plants have been adopted. This study aimed at investigating the waste reuse schemes in Khulna city located in the southern part of Bangladesh and ranked third largest city in the country. The shops for reusable material (SRM) were mostly situated around railway, waterway, and truck station markets which provided easy transportation to further locations. For the reuses of waste materials and products, a chain system was found to collect reusable wastes under a total number of 310 identified SRM with 859 persons directly or indirectly involved in the scheme. This was a decentralized waste management system with self sufficient (autonomous) management. According to mass balance, about 38.52 tons d −1 solid wastes were reused in Khulna city area, accounting for 7.65% of the total generated wastes. This study revealed that apparently a silent, systematic, smooth, and clean reuse chain has been established in Khulna city area under private initiatives, whose sustainability was confirmed over the years in the country without any official or formal funds. However, proper adjustment between the higher and lower chain in the materials flow path, as well as personal hygiene training for the workers, would further improve the achievements of the established reuse scheme.

  6. Performance Analysis of Reuse Distance in Cooperative Broadcasting

    Directory of Open Access Journals (Sweden)

    Jimmi Grönkvist

    2016-01-01

    Full Text Available Cooperative broadcasting is a promising technique for robust broadcast with low overhead and delay in mobile ad hoc networks. The technique is attractive for mission-oriented mobile communication, where a majority of the traffic is of broadcast nature. In cooperative broadcasting, all nodes simultaneously retransmit packets. The receiver utilizes cooperative diversity in the simultaneously received signals. The retransmissions continue until all nodes are reached. After the packet has traveled a specific number of hops out from the source, denoted as reuse distance, the source node transmits a new broadcast packet in the time slot used for the previous broadcast packet. If the reuse distance is too small, interference causes packet loss in intermediate nodes. In the literature, a reuse distance of three is common. With an analysis based on a realistic interference model and real terrain data, we show that a reuse distance of at least four is necessary to avoid packet loss in sparsely connected networks, especially for high spectral efficiencies. For frequency hopping, widely used in military systems, we propose a novel method. This method almost eliminates interference for a reuse distance of three, increasing the throughput by 33% compared to systems with a reuse distance of four.

  7. Technology transfer for adaptation

    Science.gov (United States)

    Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

    2014-09-01

    Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

  8. Evaluation of treated sewage reuse potential and membrane-based water reuse technology for the Bangkok Metropolitan area.

    Science.gov (United States)

    Chiemchaisri, Chart; Chiemchaisri, Wilai; Prasertkulsak, Sirilak; Hamjinda, Nutta Sangnarin; Kootatep, Thammarat; Itonaga, Takanori; Yamamoto, Kazuo

    2015-01-01

    Only 3.4% of total water use in the Bangkok Metropolitan area is reused treated sewage. This study anticipates that further treated-sewage reuse in industrial sectors, commercial buildings and public parks, in addition to present in-plant and street cleaning purposes, would increase total water reuse to about 10%. New water reuse technologies using membrane bioreactor (MBR) and microfiltration (MF) as tertiary treatment were implemented to assess their potential for their application in the Bangkok Metropolitan area. The MBR was applied to the treatment of raw sewage in a central treatment plant of the Bangkok Metropolitan area. The MF membrane was used for polishing the effluent of the treatment plant. The results show the quality of treated water from MBR and tertiary MF treatment could meet stringent water reuse quality standard in terms of biochemical oxygen demand, suspended solids and biological parameters. Constant permeate flux of the membrane was achieved over long-term operation, during which inorganic fouling was observed. This is due to the fact that incoming sewage contains a considerable amount of inorganic constituents contributed from storm water and street inlet in the combined sewerage systems. The total cost of the MBR for sewage treatment and production of reuse water is estimated to be about USD1.10/m3.

  9. High dynamic range adaptive real-time smart camera: an overview of the HDR-ARTiST project

    Science.gov (United States)

    Lapray, Pierre-Jean; Heyrman, Barthélémy; Ginhac, Dominique

    2015-04-01

    Standard cameras capture only a fraction of the information that is visible to the human visual system. This is specifically true for natural scenes including areas of low and high illumination due to transitions between sunlit and shaded areas. When capturing such a scene, many cameras are unable to store the full Dynamic Range (DR) resulting in low quality video where details are concealed in shadows or washed out by sunlight. The imaging technique that can overcome this problem is called HDR (High Dynamic Range) imaging. This paper describes a complete smart camera built around a standard off-the-shelf LDR (Low Dynamic Range) sensor and a Virtex-6 FPGA board. This smart camera called HDR-ARtiSt (High Dynamic Range Adaptive Real-time Smart camera) is able to produce a real-time HDR live video color stream by recording and combining multiple acquisitions of the same scene while varying the exposure time. This technique appears as one of the most appropriate and cheapest solution to enhance the dynamic range of real-life environments. HDR-ARtiSt embeds real-time multiple captures, HDR processing, data display and transfer of a HDR color video for a full sensor resolution (1280 1024 pixels) at 60 frames per second. The main contributions of this work are: (1) Multiple Exposure Control (MEC) dedicated to the smart image capture with alternating three exposure times that are dynamically evaluated from frame to frame, (2) Multi-streaming Memory Management Unit (MMMU) dedicated to the memory read/write operations of the three parallel video streams, corresponding to the different exposure times, (3) HRD creating by combining the video streams using a specific hardware version of the Devebecs technique, and (4) Global Tone Mapping (GTM) of the HDR scene for display on a standard LCD monitor.

  10. Minimum quality requirements for water reuse in agricultural irrigation and aquifer recharge - Towards a water reuse regulatory instrument at EU level Réédition

    OpenAIRE

    ALCALDE SANZ LAURA; GAWLIK BERND

    2017-01-01

    As an input to the design of a Legal Instrument on Water Reuse in Europe, this report recommends minimum quality requirements for water reuse in agricultural irrigation and aquifer recharge based on a risk management approach.

  11. Hybrid Membrane System for Industrial Water Reuse

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-08-01

    This factsheet describes a project that developed and demonstrated a new hybrid system for industrial wastewater treatment that synergistically combines a forward osmosis system with a membrane distillation technology and is powered by waste heat.

  12. Data reuse and the open data citation advantage

    Directory of Open Access Journals (Sweden)

    Heather A. Piwowar

    2013-10-01

    Full Text Available Background. Attribution to the original contributor upon reuse of published data is important both as a reward for data creators and to document the provenance of research findings. Previous studies have found that papers with publicly available datasets receive a higher number of citations than similar studies without available data. However, few previous analyses have had the statistical power to control for the many variables known to predict citation rate, which has led to uncertain estimates of the “citation benefit”. Furthermore, little is known about patterns in data reuse over time and across datasets. Method and Results. Here, we look at citation rates while controlling for many known citation predictors and investigate the variability of data reuse. In a multivariate regression on 10,555 studies that created gene expression microarray data, we found that studies that made data available in a public repository received 9% (95% confidence interval: 5% to 13% more citations than similar studies for which the data was not made available. Date of publication, journal impact factor, open access status, number of authors, first and last author publication history, corresponding author country, institution citation history, and study topic were included as covariates. The citation benefit varied with date of dataset deposition: a citation benefit was most clear for papers published in 2004 and 2005, at about 30%. Authors published most papers using their own datasets within two years of their first publication on the dataset, whereas data reuse papers published by third-party investigators continued to accumulate for at least six years. To study patterns of data reuse directly, we compiled 9,724 instances of third party data reuse via mention of GEO or ArrayExpress accession numbers in the full text of papers. The level of third-party data use was high: for 100 datasets deposited in year 0, we estimated that 40 papers in PubMed reused a

  13. Data reuse and the open data citation advantage.

    Science.gov (United States)

    Piwowar, Heather A; Vision, Todd J

    2013-01-01

    Background. Attribution to the original contributor upon reuse of published data is important both as a reward for data creators and to document the provenance of research findings. Previous studies have found that papers with publicly available datasets receive a higher number of citations than similar studies without available data. However, few previous analyses have had the statistical power to control for the many variables known to predict citation rate, which has led to uncertain estimates of the "citation benefit". Furthermore, little is known about patterns in data reuse over time and across datasets. Method and Results. Here, we look at citation rates while controlling for many known citation predictors and investigate the variability of data reuse. In a multivariate regression on 10,555 studies that created gene expression microarray data, we found that studies that made data available in a public repository received 9% (95% confidence interval: 5% to 13%) more citations than similar studies for which the data was not made available. Date of publication, journal impact factor, open access status, number of authors, first and last author publication history, corresponding author country, institution citation history, and study topic were included as covariates. The citation benefit varied with date of dataset deposition: a citation benefit was most clear for papers published in 2004 and 2005, at about 30%. Authors published most papers using their own datasets within two years of their first publication on the dataset, whereas data reuse papers published by third-party investigators continued to accumulate for at least six years. To study patterns of data reuse directly, we compiled 9,724 instances of third party data reuse via mention of GEO or ArrayExpress accession numbers in the full text of papers. The level of third-party data use was high: for 100 datasets deposited in year 0, we estimated that 40 papers in PubMed reused a dataset by year 2, 100 by

  14. Wastewater and Sludge Reuse Management in Agriculture

    Directory of Open Access Journals (Sweden)

    Ioannis K. Kalavrouziotis

    2016-08-01

    Full Text Available Huge quantities of treated wastewater (TMWW and biosolids (sludge are produced every day all over the world, which exert a strong pressure on the environment. An important question that is raised is “what to do with them?”.An effort is put by the scientific community to eliminate the concept of “waste” and to replace it with the concept of “recycling of resources”, by means of effective management, which does not concern only the users, but all the other groups involved in the problem, such as facility administrators, operations, politicians, scientific community and the general population. Sludge concentration data showed that there exist 516 chemicals in biosolids which create a serious health risk. It is pointed out that this risk will be greatly exacerbated by chemical toxins present in the sludge which can predispose skin to infection by pathogens. Consequently, the need for science-based policies are necessary to effectively protect public health. The risk assessment due to sludge, is difficult to evaluate of due to the large number of unknown interactions involved. People living near the sludge application sites may suffer from such abnormalities as: eye, nose, and throat irritation, gastrointestinal abnormalities, as nausea, vomiting, diarrhea, including cough, difficulty in breathing, sinus congestion, skin infection and sores. Many problems seem to be related to biosolid and wastewater application in agriculture, which should be solved. A universal one, acknowledged as an “international health crisis” is the resistance of pathogens to antibiotics and to the evolution of multidrug resistance of bacteria”. Certain anthropogenically created environments have been identified as major sources of multidrug resistance bacteria such as in water treatment plants, concentrated animal feeding operations etc. All these, and many other health problems, render the safety of sludge and biosolid and wastewater agricultural reuse, for

  15. Reusing and recycling in Saskatchewan: Environmental benefits of reusing and recycling

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    After an introduction explaining the environmental benefits of reusing and recycling, as well as providing suggestions on minimizing waste and conserving energy, a directory of recyclers and handlers of various kinds of waste in Saskatchewan is presented. Names, addresses/telephone numbers, and types of materials accepted are given for recyclers of animal products, clothing or textiles, glass, compostable materials, industrial hardware, metals, office products, paper, plastic, and tires. Collection depots in the SARCAN recycling program for beverage containers are listed, giving town name, address, hours of operation, and telephone number. Receivers of waste dangerous goods are listed under the categories of ozone-depleting substances, waste batteries, solvents, lubricating oils and oil filters, paint, flammable liquids, antifreeze, drycleaning waste, and miscellaneous.

  16. Software Reuse Success Strategy Model: An Empirical Study of Factors Involved in the Success of Software Reuse in Information System Development

    Science.gov (United States)

    Tran, Kiet T.

    2012-01-01

    This study examined the relationship between information technology (IT) governance and software reuse success. Software reuse has been mostly an IT problem but rarely a business one. Studies in software reuse are abundant; however, to date, none has a deep appreciation of IT governance. This study demonstrated that IT governance had a positive…

  17. Beneficial Re-Use of Metal from Decommissioning of Power Reactors

    International Nuclear Information System (INIS)

    Eshleman, Troy; Raw, Graham; Moloney, Barry

    2014-01-01

    will be outlined and typical components considered. Our experience suggests that significant volumes of low-to-medium activated scrap could find beneficial re-use as an alternative to managed storage or disposal. Furthermore, as EnergySolutions operates a manufacturing operation, it takes title to the scrap as it enters its manufacturing process, relieving the original generators of all responsibility for its future control. The known costs of beneficial re-use will be compared to typical projected future disposal costs. (authors)

  18. Environmental impacts and sustainability of degraded water reuse

    Energy Technology Data Exchange (ETDEWEB)

    Corwin, D.L.; Bradford, S.A. [USDA ARS, Riverside, CA (United States). US Salin Laboratory

    2008-09-15

    Greater urban demand for finite water resources to meet domestic, agricultural, industrial, and recreational needs; increased frequency of drought resulting from erratic weather; and continued degradation of available water resources from point and nonpoint sources of pollution have focused attention on the reuse of degraded waters as a potential water source. However, short- and long-term detrimental environmental impacts and sustainability of degraded water reuse are not well known or understood. These concerns led to the organization of the 2007 ASA-CSSA-SSSA Symposium entitled Environmental Impacts and Sustainability of Degraded Water Reuse. Out of this symposium came a special collection of 4 review papers and 12 technical research papers focusing on various issues associated with the reuse of agricultural drainage water, well water generated in the production of natural gas from coalbeds, municipal wastewater and biosolids, wastewater from confined animal operations, urban runoff, and food-processing wastewater. Overviews of the papers, gaps in knowledge, and future research directions are presented. The future prognosis of degraded water reuse is promising, provided close attention is paid to managing constituents that pose short- and long-term threats to the environment and the health of humankind.

  19. Does the water reuse affect the fish growth, welfare quality?

    Directory of Open Access Journals (Sweden)

    Štěpán Lang

    2012-01-01

    Full Text Available The fish production in aquaculture is growing from year to year. However capacities of current aquaculture facilities are limited. So the need of intensification of old facilities and building new intensive facilities is obvious. The high intensity of fish culture generates some questions. Could water reuse affect fish growth, welfare, health or quality of final product? A lot of research was performed for this issue but just a few works compared water reuse systems (RAS versus flow thru systems (FTS. A problem with CO2 oversaturation was solved by shallow diffusers. Fin erosion seems to be a problem of high stocking density and system hygienic but it is not related directly to water reuse. A few papers were written about biochemical blood stress markers but it was mostly aimed to acute crowding or changes were found at extreme stocking densities over 124 kg.m3 for rainbow trout and 70 kg.m3 for sea bass. The fish are able to accustom to increased noise produced by RAS equipment very fast so it don’t affect fish negatively. There wasn’t found any prove of main water reuse to fish influence in the available literature. All results indicates that if the ecological parameters are kept in natural range for the fish reared in RAS, there is no negative effect of water reuse on fish.

  20. Fernald scrap metal recycling and beneficial reuse

    International Nuclear Information System (INIS)

    Motl, G.P.; Burns, D.D.

    1993-10-01

    The Fernald site, formerly the Feed Materials Production Facility, produced uranium metal products to meet defense production requirements for the Department of Energy from 1953 to 1989. In this report is is described how the Fernald scrap metal project has demonstrated that contractor capabilities can be used successfully to recycle large quantities of Department of Energy scrap metal. The project has proven that the open-quotes beneficial reuseclose quotes concept makes excellent economic sense when a market for recycled products can be identified. Topics covered in this report include the scrap metal pile history, the procurement strategy, scrap metal processing, and a discussion of lessons learned

  1. Possibilities of industrial heritage reuse as tourist attractions: A case study of city of Zrenjanin (Vojvodina, Serbia

    Directory of Open Access Journals (Sweden)

    Ćopić Sonja

    2015-01-01

    Full Text Available Industrial heritage tourism is a new form of tourism, which often involves reuse of abandoned industrial facilities for tourism purposes. Former industrial cities, affected by deindustrialization are looking for an opportunity to economically and socially revitalize themselves through this type of tourism, which is a general trend in developed countries. The subject of this paper is investigating possibilities for reuse of industrial heritage of the city of Zrenjanin in tourism purposes, which has been hit hard by deindustrialization due to wars, economic crisis and isolation during the last decade of the 20th century. Abandoned factory complexes that serve no purpose now occupy city center, but have an important tourist potential. Some of these complexes include Zrenjanin brewery, the old city slaughterhouse and abandoned facilities of Šinvoz factory. Adaptation of these buildings into cultural, sports and shopping centers would instigate the development of tourism in the city.

  2. The life cycles of six multi-center adaptive clinical trials focused on neurological emergencies developed for the Advancing Regulatory Science initiative of the National Institutes of Health and US Food and Drug Administration: Case studies from the Adaptive Designs Accelerating Promising Treatments Into Trials Project.

    Science.gov (United States)

    Guetterman, Timothy C; Fetters, Michael D; Mawocha, Samkeliso; Legocki, Laurie J; Barsan, William G; Lewis, Roger J; Berry, Donald A; Meurer, William J

    2017-01-01

    Clinical trials are complicated, expensive, time-consuming, and frequently do not lead to discoveries that improve the health of patients with disease. Adaptive clinical trials have emerged as a methodology to provide more flexibility in design elements to better answer scientific questions regarding whether new treatments are efficacious. Limited observational data exist that describe the complex process of designing adaptive clinical trials. To address these issues, the Adaptive Designs Accelerating Promising Treatments Into Trials project developed six, tailored, flexible, adaptive, phase-III clinical trials for neurological emergencies, and investigators prospectively monitored and observed the processes. The objective of this work is to describe the adaptive design development process, the final design, and the current status of the adaptive trial designs that were developed. To observe and reflect upon the trial development process, we employed a rich, mixed methods evaluation that combined quantitative data from visual analog scale to assess attitudes about adaptive trials, along with in-depth qualitative data about the development process gathered from observations. The Adaptive Designs Accelerating Promising Treatments Into Trials team developed six adaptive clinical trial designs. Across the six designs, 53 attitude surveys were completed at baseline and after the trial planning process completed. Compared to baseline, the participants believed significantly more strongly that the adaptive designs would be accepted by National Institutes of Health review panels and non-researcher clinicians. In addition, after the trial planning process, the participants more strongly believed that the adaptive design would meet the scientific and medical goals of the studies. Introducing the adaptive design at early conceptualization proved critical to successful adoption and implementation of that trial. Involving key stakeholders from several scientific domains early

  3. A Case Study on Sustainable Reuse of Abandoned Infrastructure at Seoul Station Overpass as Urban Park for the Design Strategies in Korea

    Science.gov (United States)

    Boo, Yeeun; Kwon, Young-Sang

    2018-04-01

    As the 21st century, known for knowledge information era, many industrial infrastructures built as part of the 20th century urban development have been devastated functionally and new alternatives for them have been demanded nowadays. This study aims to discuss the strategies used in the design proposals of the International Competition for ‘Seoullo 7017 Project’, which was recently completed in May 2017, based on the sustainability of the deteriorate infrastructure as urban park. Through the competition brief, each proposal is analysed against the competition brief and the more generic approaches on the adaptive reuse of infrastructure are proposed. By examining the case in Korea, it is expected to explore the possibilities for the sustainability of abandoned infrastructure through adapting reuse as urban park in Korea, to propose design strategies that can be applied to the future adaptive use of deteriorated infrastructure in Korea, and to provide broader academic base to related works.

  4. One project's waste is another project's resource

    International Nuclear Information System (INIS)

    Short, J.

    1997-01-01

    The author describes the efforts being made toward pollution prevention within the DOE complex, as a way to reduce overall project costs, in addition to decreasing the amount of waste to be handled. Pollution prevention is a concept which is trying to be ingrained into project planning. Part of the program involves the concept that ultimately the responsibility for waste comes back to the generator. Parts of the program involve efforts to reuse materials and equipment on new projects, to recycle wastes to generate offsetting revenue, and to increase awareness, accountability and incentives so as to stimulate action on this plan. Summaries of examples are presented in tables

  5. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III.

    1995-01-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the U.S. Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. The preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping. (author)

  6. Reduce, reuse, recycle for robust cluster-state generation

    International Nuclear Information System (INIS)

    Horsman, Clare; Brown, Katherine L.; Kendon, Vivien M.; Munro, William J.

    2011-01-01

    Efficient generation of cluster states is crucial for engineering large-scale measurement-based quantum computers. Hybrid matter-optical systems offer a robust, scalable path to this goal. Such systems have an ancilla which acts as a bus connecting the qubits. We show that by generating the cluster in smaller sections of interlocking bricks, reusing one ancilla per brick, the cluster can be produced with maximal efficiency, requiring fewer than half the operations compared with no bus reuse. By reducing the time required to prepare sections of the cluster, bus reuse more than doubles the size of the computational workspace that can be used before decoherence effects dominate. A row of buses in parallel provides fully scalable cluster-state generation requiring only 20 controlled-phase gates per bus use.

  7. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III

    1994-11-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the US Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. Preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping

  8. Optimisation of industrial wastes reuse as construction materials.

    Science.gov (United States)

    Collivignarelli, C; Sorlini, S

    2001-12-01

    This study concerns the reuse of two inorganic wastes, foundry residues and fly ashes from municipal solid waste incineration, as "recycled aggregate" in concrete production. This kind of reuse was optimised by waste treatment with the following steps: waste washing with water; waste stabilisation-solidification treatment with inorganic reagents; final grinding of the stabilised waste after curing for about 10-20 days. Both the treated wastes were reused in concrete production with different mix-designs. Concrete specimens were characterised by means of conventional physical-mechanical tests (compression, elasticity modulus, shrinkage) and different leaching tests. Experimental results showed that a good structural and environmental quality of "recycled concrete" is due both to a correct waste treatment and to a correct mix-design for concrete mixture.

  9. Beneficial reuse of US DOE Radioactive scrap metal

    Energy Technology Data Exchange (ETDEWEB)

    Motl, G.P.

    1995-01-19

    The US Department of Energy (DOE) has more than 2.5 million tons of radioactive scrap metal (RSM) that is either in inventory or expected to be generated over the next 25 years as major facilities within the weapons complex are decommissioned. Since much of this metal cannot be decontaminated easily, past practice has been to either retain this material in inventory or ship it to DOE disposal sites for burial. In an attempt to conserve natural resources and to avoid burial of this material at DOE disposal sites, options are now being explored to ``beneficially reuse`` this material. Under the beneficial reuse concept, RSM that cannot be decontaminated and free released is used in applications where the inherent contamination is not a detriment to its end use. This paper describes initiatives currently in progress in the United States that support the DOE beneficial reuse concept.

  10. Beneficial reuse of US DOE Radioactive scrap metal

    International Nuclear Information System (INIS)

    Motl, G.P.

    1995-01-01

    The US Department of Energy (DOE) has more than 2.5 million tons of radioactive scrap metal (RSM) that is either in inventory or expected to be generated over the next 25 years as major facilities within the weapons complex are decommissioned. Since much of this metal cannot be decontaminated easily, past practice has been to either retain this material in inventory or ship it to DOE disposal sites for burial. In an attempt to conserve natural resources and to avoid burial of this material at DOE disposal sites, options are now being explored to ''beneficially reuse'' this material. Under the beneficial reuse concept, RSM that cannot be decontaminated and free released is used in applications where the inherent contamination is not a detriment to its end use. This paper describes initiatives currently in progress in the United States that support the DOE beneficial reuse concept

  11. Oilfield Produced Water Reuse and Reinjection with Membrane

    Directory of Open Access Journals (Sweden)

    Siagian Utjok W.R.

    2018-01-01

    Full Text Available Produced water has become a global environmental issue due to its huge volume and toxicity that may pose detrimental effects on receiving environment. Several approaches have been proposed to provide a strategy for produced water handling such as reinjection, reuse, or discharge. With various advantages, membrane technology has been increasingly used in produced water treatment replacing the conventional technologies. However, fouling is a major drawback of membrane processes in this application which needs to be controlled. This paper gives an overview and comparison of different produced water management. Special attention is given to produced water treatment for reuse purpose. Furthermore, the use of membrane processes in produced water reuse including performance, challenges, and future outlook are discussed.

  12. Reuse of waste water: impact on water supply planning

    Energy Technology Data Exchange (ETDEWEB)

    Mangan, G.F. Jr.

    1978-06-01

    As the urban population of the world increases and demands on easily developable water supplies are exceeded, cities have recourse to a range of management alternatives to balance municipal water supply and demand. These alternatives range from doing nothing to modifying either the supply or the demand variable in the supply-demand relationship. The reuse or recycling of urban waste water in many circumstances may be an economically attractive and effective management strategy for extending existing supplies of developed water, for providing additional water where no developable supplies exist and for meeting water quality effluent discharge standards. The relationship among municipal, industrial and agricultural water use and the treatment links which may be required to modify the quality of a municipal waste effluent for either recycling or reuse purposes is described. A procedure is described for analyzing water reuse alternatives within a framework of regional water supply and waste water disposal planning and management.

  13. REUSE OF AUTOMOTIVE COMPONENTS FROM DISMANTLED END OF LIFE VEHICLES

    Directory of Open Access Journals (Sweden)

    Piotr NOWAKOWSKI

    2013-12-01

    Full Text Available The problem of recycling end of life automotive vehicles is serious worldwide. It is one of the most important streams of waste in developed countries. It has big importance as recycling potential of raw materials content in automotive vehicles is valuable. Different parts and assemblies after dismantling can also be reused in vehicles where replacement of specific component is necessary. Reuse of the components should be taken into consideration in selecting the vehicles dismantling strategy. It also complies with European Union policy concerning end of life vehicles (ELV. In the paper it is presented systematic approach to dismantling strategies including disassembly oriented on further reuse of components. It is focused on decision making and possible benefits calculation from economic and environmental point of view.

  14. Adaptive iterative dose reduction algorithm in CT: Effect on image quality compared with filtered back projection in body phantoms of different sizes

    International Nuclear Information System (INIS)

    Kim, Milim; Lee, Jeong Min; Son, Hyo Shin; Han, Joon Koo; Choi, Byung Ihn; Yoon, Jeong Hee; Choi, Jin Woo

    2014-01-01

    To evaluate the impact of the adaptive iterative dose reduction (AIDR) three-dimensional (3D) algorithm in CT on noise reduction and the image quality compared to the filtered back projection (FBP) algorithm and to compare the effectiveness of AIDR 3D on noise reduction according to the body habitus using phantoms with different sizes. Three different-sized phantoms with diameters of 24 cm, 30 cm, and 40 cm were built up using the American College of Radiology CT accreditation phantom and layers of pork belly fat. Each phantom was scanned eight times using different mAs. Images were reconstructed using the FBP and three different strengths of the AIDR 3D. The image noise, the contrast-to-noise ratio (CNR) and the signal-to-noise ratio (SNR) of the phantom were assessed. Two radiologists assessed the image quality of the 4 image sets in consensus. The effectiveness of AIDR 3D on noise reduction compared with FBP were also compared according to the phantom sizes. Adaptive iterative dose reduction 3D significantly reduced the image noise compared with FBP and enhanced the SNR and CNR (p < 0.05) with improved image quality (p < 0.05). When a stronger reconstruction algorithm was used, greater increase of SNR and CNR as well as noise reduction was achieved (p < 0.05). The noise reduction effect of AIDR 3D was significantly greater in the 40-cm phantom than in the 24-cm or 30-cm phantoms (p < 0.05). The AIDR 3D algorithm is effective to reduce the image noise as well as to improve the image-quality parameters compared by FBP algorithm, and its effectiveness may increase as the phantom size increases.

  15. Adaptive iterative dose reduction algorithm in CT: Effect on image quality compared with filtered back projection in body phantoms of different sizes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Milim; Lee, Jeong Min; Son, Hyo Shin; Han, Joon Koo; Choi, Byung Ihn [College of Medicine, Seoul National University, Seoul (Korea, Republic of); Yoon, Jeong Hee; Choi, Jin Woo [Dept. of Radiology, Seoul National University Hospital, Seoul (Korea, Republic of)

    2014-04-15

    To evaluate the impact of the adaptive iterative dose reduction (AIDR) three-dimensional (3D) algorithm in CT on noise reduction and the image quality compared to the filtered back projection (FBP) algorithm and to compare the effectiveness of AIDR 3D on noise reduction according to the body habitus using phantoms with different sizes. Three different-sized phantoms with diameters of 24 cm, 30 cm, and 40 cm were built up using the American College of Radiology CT accreditation phantom and layers of pork belly fat. Each phantom was scanned eight times using different mAs. Images were reconstructed using the FBP and three different strengths of the AIDR 3D. The image noise, the contrast-to-noise ratio (CNR) and the signal-to-noise ratio (SNR) of the phantom were assessed. Two radiologists assessed the image quality of the 4 image sets in consensus. The effectiveness of AIDR 3D on noise reduction compared with FBP were also compared according to the phantom sizes. Adaptive iterative dose reduction 3D significantly reduced the image noise compared with FBP and enhanced the SNR and CNR (p < 0.05) with improved image quality (p < 0.05). When a stronger reconstruction algorithm was used, greater increase of SNR and CNR as well as noise reduction was achieved (p < 0.05). The noise reduction effect of AIDR 3D was significantly greater in the 40-cm phantom than in the 24-cm or 30-cm phantoms (p < 0.05). The AIDR 3D algorithm is effective to reduce the image noise as well as to improve the image-quality parameters compared by FBP algorithm, and its effectiveness may increase as the phantom size increases.

  16. Concepts for Reusing Composite Materials from Decommissioned Wind Turbine Blades in Affordable Housing

    Directory of Open Access Journals (Sweden)

    Lawrence C. Bank

    2018-01-01

    Full Text Available The very rapid growth in wind energy technology in the last 15 years has led to a rapid growth in the amount of non-biodegradable, thermosetting fiber reinforced polymer (FRP composite materials used in wind turbine blades. This paper discusses conceptual architectural and structural options for recycling these blades by reusing parts of wind turbine blades in new or retrofitted housing projects. It focuses on large-sized FRP pieces that can be salvaged from the turbine blades and can potentially be useful in infrastructure projects where harsh environmental conditions (water and high humidity exist. Since reuse design should be for specific regional locations and architectural characteristics the designs presented in this paper are for the coastal regions of the Yucatan province in Mexico on the Gulf of Mexico where low-quality masonry block informal housing is vulnerable to severe hurricanes and flooding. To demonstrate the concept a prototype 100 m long wind blade model developed by Sandia National Laboratories is used to show how a wind blade can be broken down into parts, thus making it possible to envision architectural applications for the different wind blade segments for housing applications.

  17. An alternative process to treat boiler feed water for reuse.

    Science.gov (United States)

    Guirgis, Adel; Ghosh, Jyoti P; Achari, Gopal; Langford, Cooper H; Banerjee, Daliya

    2012-09-01

    A bench-scale process to treat boiler feed water for reuse in steam generation was developed. Industrial water samples from a steam-assisted gravity drainage plant in northern Alberta, Canada, were obtained and samples characterized. The technology, which consists of coagulation-settling to remove oil/grease and particulates followed by an advanced oxidative treatment, led to clean water samples with negligible organic carbon. Coagulation followed by settling removed most particulates and some insoluble organics. The advanced oxidative treatment removed any remaining color in the samples, decreased the organic content to near-zero, and provided water ready for reuse.

  18. Reusing Implicit Cooperation. A Novel Approach to Knowledge Management

    Directory of Open Access Journals (Sweden)

    Luigi Lancieri

    2008-07-01

    Full Text Available The study described in this paper deals with information reuse obtained by implicit co-operation, particularly by recycling the contents of a proxy cache (shared memory. The objective is to automatically feed a Web server with large multimedia objects implicitly centred on community fields of interests. We show that the strategy of reusing previously downloaded information provides interesting advantages at a low cost; in particular, to reduce Web access time, to improve information retrieval, and to reduce Internet bandwidth use. Moreover, we use the conceptual frameworks of forgetting and collective intelligence to develop a model on which the operation of implicit cooperation is based.

  19. A Case Study of Framework Design for Horizontal Reuse

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Røn, Henrik

    2000-01-01

    through the application of design patterns. We outline the reuse process and analyse and classify the problems encountered during the first-instance framework reuse. The major lessons learned are: (1) that, while design patterns are well-known for providing decoupling solutions at the code level, the lack...... of similar decoupling techniques at the non-code level may give rise to technical mismatch problems between the framework and the client systems; (2) that such technical mismatch problems can be costly; and (3) that a reusable framework may beneficially provide a solution template when it cannot provide...

  20. SOFTWARE REUSING AND ITS IMPACT ON THE SYSTEM'S COST

    OpenAIRE

    Lorena Lazo, Paul; Ruiz Lizama, Edgar

    2014-01-01

    This article presents two programs in C# that use an SQL server 2002 data access component, which is modified to be used with a 9i data base, with the purpose of evaluating a developer's productivity, making the comparative analysis of two stages: a system developed reusing software, and another one without software reusing. El artículo presenta dos programas en C# que utilizan un componente de acceso de base de datos SQL Server 2002, el cual se modifica para ser utilizado con una Base de ...

  1. Water reuse and desalination in Spain – challenges and opportunities

    Directory of Open Access Journals (Sweden)

    Teresa Navarro

    2018-04-01

    Full Text Available This article offers an evaluation of the reuse of reclaimed water and desalination in Spain and aims to provide an overview of the state of the art and Spanish legal framework as far as non-conventional resources are concerned. The fight against the scarcity of water resources in this country, especially in the southeast, has made the production of new alternative water resources a clear priority and has turned the nation into a leader in water reuse and seawater desalination. The assessment presented can be used to help build a more general framework, like the European one, and shed light on other comparative legal experiences.

  2. Improved semantic interoperability for content reuse through knowledge organization systems

    Directory of Open Access Journals (Sweden)

    José Antonio Moreiro González

    2012-04-01

    Full Text Available The Knowledge Organization Systems (KOS are resources designed to improve the knowledge interoperability, management and retrieval. As increases the web resources, it’s evidenced the lack of KOS, with the consequent impact in the resources interoperability. The KOSS are, by definition, complicated and costly tools, so much in his creation as in his management. The reuse of similar organizational structures is a necessary element in this context. They analyses experiences of reuse of The KOS and signals like the new standards are impinged on this appearance.

  3. ORIOLE, in the Search for Evidence of OER in Teaching. Experiences in the Use, Re-Use and the Sharing and Influence of Repositories

    Science.gov (United States)

    Santos-Hermosa, Gema

    2014-01-01

    The study presented here aims to gather useful information on the use, re-reuse and sharing of resources in Education and also the influence of repositories, to better understand the perspective of individual practitioners and suggest future areas of debate for researchers. Open Resources: Influence on Learners and Educators (ORIOLE) project, was…

  4. Harness: Heterogeneous Adaptable Reconfigurable Networked Systems -- U.S. Department of Energy Grant DE-FG02-99ER25379 Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Vaidy Sunderam

    2003-07-02

    Issues in reconfigurability and adaptability in heterogeneous distributed systems for high-performance computing are the focus of the work funded by this grant. Our efforts are part of an ongoing research project in metacomputing and are a follow on to the DOE funded PVM system that has witnessed over a decade of use at numerous institutions worldwide. The current project, termed Harness, investigates novel methodologies and tools for distributed metacomputing, focusing on dynamically reconfigurable software frameworks. During the first phase, we defined the metacomputing architecture embodied in Harness and developed prototype subsystems as proof of concept exercises. Subsequently, we designed and developed a complete software framework manifesting the Harness architecture, and also developed several tools and subsystems that demonstrated the viability and effectiveness of our proposed model for next generation metacomputing. We then used this substrate to emulate multiple programming environments on Harness, and conducted performance evaluation and tuning exercises. The main research results from these efforts include the establishment of software metacomputing systems as viable and cost-effective alternatives to MPPs; the demonstration of dynamic and reconfigurable platforms as effective methods of tailoring parallel computing environments; the development of methodologies to construct plugin modules for component-based distributed systems; contributions to performance modeling and optimization in emulated software environments; and software architectures for multi- and mixed-paradigm parallel distributed computing. Details and specifics on these and other results have been reported in numerous publications, and are manifested in software systems, all of which may be accessed at or via the website http://www.mathcs.emory.edu/harness/

  5. Understanding climate change adaptation and adaptive capacity: synthesis report

    Energy Technology Data Exchange (ETDEWEB)

    Patino, L. [Policy Research Initiative, Government of Canada, Ottawa, ON (Canada)

    2010-09-15

    In 2007, the Natural Resources Canada (NRCan) Climate Change Impacts and Adaptation Division (CCIAD) offered its support to research projects that were involved in understanding and improving adaptation and adaptive capacity and contributed to climate change decision-making and policy development in Canada. 20 research projects were commissioned by the CCIAD. With the collaboration of NRCan, the principal findings raised by the commissioned projects were synthesized by the Policy Research Initiative (PRI). Common themes and main messages are introduced in this synthesis report, and policy and program aspects that promote adaptive capacity to climate change in Canada are identified. Common themes and important messages emerging from the research projects, as well as the processes and barriers to adaptation and adaptive capacity identified in the commissioned projects, were discussed during a workshop held in Ottawa in 2009. Five main themes and four common barriers to adaptation were found. 25 refs.

  6. Quantitative analysis of emphysema and airway measurements according to iterative reconstruction algorithms: comparison of filtered back projection, adaptive statistical iterative reconstruction and model-based iterative reconstruction

    International Nuclear Information System (INIS)

    Choo, Ji Yung; Goo, Jin Mo; Park, Chang Min; Park, Sang Joon; Lee, Chang Hyun; Shim, Mi-Suk

    2014-01-01

    To evaluate filtered back projection (FBP) and two iterative reconstruction (IR) algorithms and their effects on the quantitative analysis of lung parenchyma and airway measurements on computed tomography (CT) images. Low-dose chest CT obtained in 281 adult patients were reconstructed using three algorithms: FBP, adaptive statistical IR (ASIR) and model-based IR (MBIR). Measurements of each dataset were compared: total lung volume, emphysema index (EI), airway measurements of the lumen and wall area as well as average wall thickness. Accuracy of airway measurements of each algorithm was also evaluated using an airway phantom. EI using a threshold of -950 HU was significantly different among the three algorithms in decreasing order of FBP (2.30 %), ASIR (1.49 %) and MBIR (1.20 %) (P < 0.01). Wall thickness was also significantly different among the three algorithms with FBP (2.09 mm) demonstrating thicker walls than ASIR (2.00 mm) and MBIR (1.88 mm) (P < 0.01). Airway phantom analysis revealed that MBIR showed the most accurate value for airway measurements. The three algorithms presented different EIs and wall thicknesses, decreasing in the order of FBP, ASIR and MBIR. Thus, care should be taken in selecting the appropriate IR algorithm on quantitative analysis of the lung. (orig.)

  7. Comparison of the image qualities of filtered back-projection, adaptive statistical iterative reconstruction, and model-based iterative reconstruction for CT venography at 80 kVp

    International Nuclear Information System (INIS)

    Kim, Jin Hyeok; Choo, Ki Seok; Moon, Tae Yong; Lee, Jun Woo; Jeon, Ung Bae; Kim, Tae Un; Hwang, Jae Yeon; Yun, Myeong-Ja; Jeong, Dong Wook; Lim, Soo Jin

    2016-01-01

    To evaluate the subjective and objective qualities of computed tomography (CT) venography images at 80 kVp using model-based iterative reconstruction (MBIR) and to compare these with those of filtered back projection (FBP) and adaptive statistical iterative reconstruction (ASIR) using the same CT data sets. Forty-four patients (mean age: 56.1 ± 18.1) who underwent 80 kVp CT venography (CTV) for the evaluation of deep vein thrombosis (DVT) during 4 months were enrolled in this retrospective study. The same raw data were reconstructed using FBP, ASIR, and MBIR. Objective and subjective image analysis were performed at the inferior vena cava (IVC), femoral vein, and popliteal vein. The mean CNR of MBIR was significantly greater than those of FBP and ASIR and images reconstructed using MBIR had significantly lower objective image noise (p <.001). Subjective image quality and confidence of detecting DVT by MBIR group were significantly greater than those of FBP and ASIR (p <.005), and MBIR had the lowest score for subjective image noise (p <.001). CTV at 80 kVp with MBIR was superior to FBP and ASIR regarding subjective and objective image qualities. (orig.)

  8. Adaptive statistical iterative reconstruction versus filtered back projection in the same patient: 64 channel liver CT image quality and patient radiation dose

    International Nuclear Information System (INIS)

    Mitsumori, Lee M.; Shuman, William P.; Busey, Janet M.; Kolokythas, Orpheus; Koprowicz, Kent M.

    2012-01-01

    To compare routine dose liver CT reconstructed with filtered back projection (FBP) versus low dose images reconstructed with FBP and adaptive statistical iterative reconstruction (ASIR). In this retrospective study, patients had a routine dose protocol reconstructed with FBP, and again within 17 months (median 6.1 months), had a low dose protocol reconstructed twice, with FBP and ASIR. These reconstructions were compared for noise, image quality, and radiation dose. Nineteen patients were included. (12 male, mean age 58). Noise was significantly lower in low dose images reconstructed with ASIR compared to routine dose images reconstructed with FBP (liver: p <.05, aorta: p < 0.001). Low dose FBP images were scored significantly lower for subjective image quality than low dose ASIR (2.1 ± 0.5, 3.2 ± 0.8, p < 0.001). There was no difference in subjective image quality scores between routine dose FBP images and low dose ASIR images (3.6 ± 0.5, 3.2 ± 0.8, NS).Radiation dose was 41% less for the low dose protocol (4.4 ± 2.4 mSv versus 7.5 ± 5.5 mSv, p < 0.05). Our initial results suggest low dose CT images reconstructed with ASIR may have lower measured noise, similar image quality, yet significantly less radiation dose compared with higher dose images reconstructed with FBP. (orig.)

  9. Quantitative analysis of emphysema and airway measurements according to iterative reconstruction algorithms: comparison of filtered back projection, adaptive statistical iterative reconstruction and model-based iterative reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Choo, Ji Yung [Seoul National University Medical Research Center, Department of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul (Korea, Republic of); Korea University Ansan Hospital, Ansan-si, Department of Radiology, Gyeonggi-do (Korea, Republic of); Goo, Jin Mo; Park, Chang Min; Park, Sang Joon [Seoul National University Medical Research Center, Department of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul (Korea, Republic of); Seoul National University, Cancer Research Institute, Seoul (Korea, Republic of); Lee, Chang Hyun; Shim, Mi-Suk [Seoul National University Medical Research Center, Department of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul (Korea, Republic of)

    2014-04-15

    To evaluate filtered back projection (FBP) and two iterative reconstruction (IR) algorithms and their effects on the quantitative analysis of lung parenchyma and airway measurements on computed tomography (CT) images. Low-dose chest CT obtained in 281 adult patients were reconstructed using three algorithms: FBP, adaptive statistical IR (ASIR) and model-based IR (MBIR). Measurements of each dataset were compared: total lung volume, emphysema index (EI), airway measurements of the lumen and wall area as well as average wall thickness. Accuracy of airway measurements of each algorithm was also evaluated using an airway phantom. EI using a threshold of -950 HU was significantly different among the three algorithms in decreasing order of FBP (2.30 %), ASIR (1.49 %) and MBIR (1.20 %) (P < 0.01). Wall thickness was also significantly different among the three algorithms with FBP (2.09 mm) demonstrating thicker walls than ASIR (2.00 mm) and MBIR (1.88 mm) (P < 0.01). Airway phantom analysis revealed that MBIR showed the most accurate value for airway measurements. The three algorithms presented different EIs and wall thicknesses, decreasing in the order of FBP, ASIR and MBIR. Thus, care should be taken in selecting the appropriate IR algorithm on quantitative analysis of the lung. (orig.)

  10. Adaptive statistical iterative reconstruction versus filtered back projection in the same patient: 64 channel liver CT image quality and patient radiation dose

    Energy Technology Data Exchange (ETDEWEB)

    Mitsumori, Lee M.; Shuman, William P.; Busey, Janet M.; Kolokythas, Orpheus; Koprowicz, Kent M. [University of Washington School of Medicine, Department of Radiology, Seattle, WA (United States)

    2012-01-15

    To compare routine dose liver CT reconstructed with filtered back projection (FBP) versus low dose images reconstructed with FBP and adaptive statistical iterative reconstruction (ASIR). In this retrospective study, patients had a routine dose protocol reconstructed with FBP, and again within 17 months (median 6.1 months), had a low dose protocol reconstructed twice, with FBP and ASIR. These reconstructions were compared for noise, image quality, and radiation dose. Nineteen patients were included. (12 male, mean age 58). Noise was significantly lower in low dose images reconstructed with ASIR compared to routine dose images reconstructed with FBP (liver: p <.05, aorta: p < 0.001). Low dose FBP images were scored significantly lower for subjective image quality than low dose ASIR (2.1 {+-} 0.5, 3.2 {+-} 0.8, p < 0.001). There was no difference in subjective image quality scores between routine dose FBP images and low dose ASIR images (3.6 {+-} 0.5, 3.2 {+-} 0.8, NS).Radiation dose was 41% less for the low dose protocol (4.4 {+-} 2.4 mSv versus 7.5 {+-} 5.5 mSv, p < 0.05). Our initial results suggest low dose CT images reconstructed with ASIR may have lower measured noise, similar image quality, yet significantly less radiation dose compared with higher dose images reconstructed with FBP. (orig.)

  11. Second life. Reuse of used electric and electronic equipment; Second Life. Wiederverwendung gebrauchter Elektro- und Elektronikgeraete

    Energy Technology Data Exchange (ETDEWEB)

    Broehl-Kerner, Horst; Elander, Maria; Koch, Martin; Vendramin, Claudio [Bundesarbeitsgemeinschaft Arbeit e.V., Berlin (Germany)

    2012-07-15

    In project Second Life the existing basic conditions and framework, as well as the different aspects of high-quality reuse were researched and documented. In addition, innovative attempts of the procurement were tested and the feasibility of a quality labeling for electric and electronic devices was analyzed and documented. The results deliver at all important levels of consideration the topically necessary orientation on the subject of reuse of E- devices referring to the product spectrum focused in the project. On the basis of the achieved project results the project partners work on the following aims for the future: First, Informal interlinking of the stakeholder and actors brought together in the project via a new homepage (www.bagsecondlife.de) and newsletter of bag arbeit department for Labour and Environment (FAU) in order to inform about new and changing legislation more actually and also to help them participating in activities of creating contents of a label. Second, establishing a label (e.g. ''ECO Second'') that will be successful on the market. An important base for the project work is the interdisciplinary cooperation of four partners from different fields of action. Thus they were able to cover the required expertise in the fields of protection of environment and climate as well as environmental communication. Both the last aspects were introduced by the Deutsche Umwelthilfe. The operational or practical aspects were represented by Arbeitskreis Recycling and Werkstatt Frankfurt as well as by FAU. Project coordination, spreading of information and the necessary law expertise were perceived from bag arbeit respectively members of FAU-board. With the contributions of Oekopol GmbH and Dr. Bruening engineering to norms, rules, market sphere and ecological classification of the plan, demanded and necessary technical expert's assessment were integrated. Further single results of the project are the project homepage mentioned above

  12. A new case for promoting wastewater reuse in Saudi Arabia: bringing energy into the water equation.

    Science.gov (United States)

    Kajenthira, Arani; Siddiqi, Afreen; Anadon, Laura Diaz

    2012-07-15

    Saudi Arabia is the third-largest per capita water user worldwide and has addressed the disparity between its renewable water resources and domestic demand primarily through desalination and the abstraction of non-renewable groundwater. This study evaluates the potential costs of this approach in the industrial and municipal sectors, exploring economic, energy, and environmental costs (including CO2 emissions and possible coastal impacts). Although the energy intensity of desalination is a global concern, it is particularly urgent to rethink water supply options in Saudi Arabia because the entirety of its natural gas production is consumed domestically, primarily in petrochemical and desalination plants. This burgeoning demand is necessitating the development of more expensive high-sulfur gas resources that could make desalination even pricier. The evolving necessity to conserve non-renewable water and energy resources and mitigate GHG emissions in the region also requires policy makers to weigh in much more considerably the energy and environmental costs of desalination. This paper suggests that in Saudi Arabia, the implementation of increased water conservation and reuse across the oil and natural gas sectors could conserve up to 29% of total industrial water withdrawals at costs recovered over 0-30 years, depending on the specific improvement. This work also indicates that increasing wastewater treatment and reuse in six high-altitude inland cities could save a further $225 million (2009 dollars) and conserve 2% of Saudi Arabia's annual electricity consumption. By these estimates, some anticipated investments in desalination projects could be deferred by improving water efficiency in industry and prioritizing investment in sewage and water distribution networks that would ensure more effective water reclamation and reuse. Simultaneously, such initiatives would conserve non-renewable natural gas resources and could help prevent the lock-in of potentially

  13. Reusing Design Knowledge Based on Design Cases and Knowledge Map

    Science.gov (United States)

    Yang, Cheng; Liu, Zheng; Wang, Haobai; Shen, Jiaoqi

    2013-01-01

    Design knowledge was reused for innovative design work to support designers with product design knowledge and help designers who lack rich experiences to improve their design capacity and efficiency. First, based on the ontological model of product design knowledge constructed by taxonomy, implicit and explicit knowledge was extracted from some…

  14. Silver Uptake and Reuse of Biomass by Saccharomyces cerevisiae ...

    African Journals Online (AJOL)

    Studies were carried out on the recovery of bound silver and reuse of Chlorella emersonii and Saccharomyces cerevisiae biomass for further silver uptake after they were placed in contact with 20mg/l silver for 30 minutes to allow for maximum binding. It was found that 0.16M nitric acid gave the best recovery rates of silver.

  15. Potential for reuse of effluent from fish-processing industries

    Directory of Open Access Journals (Sweden)

    Luana Morena Rodrigues Vitor Dias Ferraciolli

    2017-09-01

    Full Text Available The most common problems in the fish processing industry relate to high water consumption and the generation of effluents with concentrated organic loads. Given that reuse can represent an alternative for sustainable development, this study sought to assess the potential for recycling effluents produced in a fish-processing plant. In order to do so, the final industrial effluent was analyzed using the American Public Health Association (APHA standard effluent-analysis method (2005. In addition, the study assessed treatments which produce effluents meeting the requirements prescribed by different countries' regulations for reuse and recycling. The results found that effluents with smaller organic loads, such as those from health barriers and monoblock washing, can be treated in order to remove nutrients and solids so that they can be subsequently reused. For effluents produced by the washing and gutting cylinders, it is recommended that large fragments of solid waste be removed beforehand. Effluents can in this way attain a quality compatible with industrial reuse. This study further highlights the possibility of treating effluents so as comply with drinking water standards. This would potentially allow them to be used within the actual fish-processing procedure; in such a case, a revision of standards and measures for controlling use should be considered to prevent microbiological damage to products and risks to handlers and final consumers.

  16. Clearance of building structures for conventional non-nuclear reuse

    International Nuclear Information System (INIS)

    Buss, K.; Boehringer, S.

    1998-01-01

    At the example of a fuel assembly plant the strategy of control measurements on building surfaces, which shall be conventionally reused after their clearance, is regarded. Based on the given clearance levels the used measuring methods, especially with regard of possibly covered or intruded uranium contamination, are shown. The possibility of using the in-situ-γ-spectroscopy is discussed. (orig.) [de

  17. Discovery and Reuse of Open Datasets: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Sara

    2016-07-01

    Full Text Available Objective: This article analyzes twenty cited or downloaded datasets and the repositories that house them, in order to produce insights that can be used by academic libraries to encourage discovery and reuse of research data in institutional repositories. Methods: Using Thomson Reuters’ Data Citation Index and repository download statistics, we identified twenty cited/downloaded datasets. We documented the characteristics of the cited/downloaded datasets and their corresponding repositories in a self-designed rubric. The rubric includes six major categories: basic information; funding agency and journal information; linking and sharing; factors to encourage reuse; repository characteristics; and data description. Results: Our small-scale study suggests that cited/downloaded datasets generally comply with basic recommendations for facilitating reuse: data are documented well; formatted for use with a variety of software; and shared in established, open access repositories. Three significant factors also appear to contribute to dataset discovery: publishing in discipline-specific repositories; indexing in more than one location on the web; and using persistent identifiers. The cited/downloaded datasets in our analysis came from a few specific disciplines, and tended to be funded by agencies with data publication mandates. Conclusions: The results of this exploratory research provide insights that can inform academic librarians as they work to encourage discovery and reuse of institutional datasets. Our analysis also suggests areas in which academic librarians can target open data advocacy in their communities in order to begin to build open data success stories that will fuel future advocacy efforts.

  18. Reduce--recycle--reuse: guidelines for promoting perioperative waste management.

    Science.gov (United States)

    Laustsen, Gary

    2007-04-01

    The perioperative environment generates large amounts of waste, which negatively affects local and global ecosystems. To manage this waste health care facility leaders must focus on identifying correctable issues, work with relevant stakeholders to promote solutions, and adopt systematic procedural changes. Nurses and managers can moderate negative environmental effects by promoting reduction, recycling, and reuse of materials in the perioperative setting.

  19. Supporting the Reuse of Open Educational Resources through Open Standards

    NARCIS (Netherlands)

    Glahn, Christian; Kalz, Marco; Gruber, Marion; Specht, Marcus

    2010-01-01

    Glahn, C., Kalz, M., Gruber, M., & Specht, M. (2010). Supporting the Reuse of Open Educational Resources through Open Standards. In T. Hirashima, A. F. Mohd Ayub, L. F. Kwok, S. L. Wong, S. C. Kong, & F. Y. Yu (Eds.), Workshop Proceedings of the 18th International Conference on Computers in

  20. Emergy Evaluation of Different Straw Reuse Technologies in Northeast China

    Directory of Open Access Journals (Sweden)

    Xiaoxian Zhang

    2015-08-01

    Full Text Available Open burning of straw in China has degraded agricultural environments and has become a contributor to air pollution. Development of efficient straw-reuse technologies not only can yield economic benefits but also can protect the environment and can provide greater benefit to society. Thus, the overall benefits of straw-reuse technologies must be considered when making regional development planning and enterprise technology decisions. In addition, agricultural areas in China cross several climatic zones and have different weather characteristics and cultural conditions. In the present study, we assessed five types of straw-reuse technologies (straw-biogas production, -briquetting, -based power generation, -gasification, and -bioethanol production, using emergy analysis, in northeast China. Within each type, five individual cases were investigated, and the highest-performing cases were used for comparison across technologies. Emergy indices for comprehensive benefits for each category, namely, EYR, ELR, and ESI were calculated. Calculated indices suggest that straw-briquetting and -biogas production are the most beneficial technologies in terms of economy, environmental impact, and sustainability compared to straw-based power generation, -gasification, and -bioethanol production technologies. These two technologies can thus be considered the most suitable for straw reuse in China.

  1. Finding source code on the web for remix and reuse

    CERN Document Server

    York, Springer New

    2013-01-01

    First comprehensive treatment of the topic, bringing together results from multiple research areas including information retrieval, programming, software tools, software reuse, testing, and social aspects Presents essential reading for researchers new to the area Includes contributions from leading companies and experts in data structure, software engineering, and HCI

  2. Resource Recovery and Reuse in Organic Solid Waste Management

    NARCIS (Netherlands)

    Lens, P.N.L.; Hamelers, H.V.M.; Hoitink, H.; Bidlingmaier, W.

    2004-01-01

    Uncontrolled spreading of waste materials leads to health problems and environmental damage. To prevent these problems a waste management infrastructure has been set to collect and dispose of the waste, based on a hierarchy of three principles: waste prevention, recycling/reuse, and final disposal.

  3. Ceramic Ultra- and Nanofiltration for Municipal Wastewater Reuse

    NARCIS (Netherlands)

    Shang, R.

    2014-01-01

    During the last decade, water reuse has been widely recognized in many regions of the world. Fouling of ceramic membranes, especially hydraulically irreversible fouling, is a critical aspect affecting the operational cost and energy consumption in water treatment plants. In addition, the reverse

  4. Towards a national policy on wastewater reuse in Kenya | Kaluli ...

    African Journals Online (AJOL)

    Potable water for irrigation and industrial use is generally unavailable, and this calls for alternative water sources. Despite use of wastewater being illegal in Kenya, it is used to irrigate over 720 ha in Nairobi. In order to justify the formulation of a national policy to support wastewater reuse, secondary data which included the ...

  5. Factors Affecting the Intention to Reuse Mobile Banking Service

    Directory of Open Access Journals (Sweden)

    Ceva Lavenja Arahita

    2015-10-01

    Full Text Available The accelerated advancement in technology resulted to the appearance of Self Service Technology. One form of self-service technology in the banking sector is the presence of mobile banking. This study aims to examine the influence of five factors toward the reusing of Mobile Bank Central Asia (BCA in Bandung. Those factors used in this study were the extension of Technology Acceptance Model (TAM constructs, i.e perceived usefulness, perceived ease of use, perceived credibility, customer awareness and social influence. Data was collected through distributed questionnaire to 100 respondents who used Mobile BCA by using judgment sampling. Multiple linear regression technique was employed to investigate the influence among variables. This study empirically concluded that consumer intention to reuse BCA mobile services was positively influenced by perceived ease of use, customer awareness and social influence. On the other hand, perceived usefulness and perceived credibility did not influence the intention of reusing Mobile BCA in Bandung. Further study is suggested to use probability sampling technique to cover the real voice of mobile banking user in Bandung and to explore the lack influence of perceived usefulness and perceived credibility toward reusing of Mobile BCA.

  6. Factors Affecting the Intention to Reuse Mobile Banking Service

    Directory of Open Access Journals (Sweden)

    Ceva Lavenja Arahita

    2015-12-01

    Full Text Available The accelerated advancement in technology resulted to the appearance of Self Service Technology. One form of self-service technology in the banking sector is the presence of mobile banking. This study aims to examine the influence of five factors toward the reusing of Mobile Bank Central Asia (BCA in Bandung. Those factors used in this study were the extension of Technology Acceptance Model (TAM constructs, i.e perceived usefulness, perceived ease of use, perceived credibility, customer awareness and social influence. Data was collected through distributed questionnaire to 100 respondents who used Mobile BCA by using judgment sampling. Multiple linear regression technique was employed to investigate the influence among variables. This study empirically concluded that consumer intention to reuse BCA mobile services was positively influenced by social influence, customer awareness and perceived ease of use. On the other hand, perceived usefulness and perceived credibility did not influence the intention of reusing Mobile BCA in Bandung. Further study is suggested to use probability sampling technique to cover the real voice of mobile banking user in Bandung and to explore the lack influence of perceived usefulness and perceived credibility toward reusing of Mobile BCA.

  7. The applicability of nanofiltration for the treatment and reuse of ...

    African Journals Online (AJOL)

    The main aim of the study was to test the feasibility of using nanofiltration (NF) processes for the treatment of reactive dyebath effluents from the textile industry, in order to recover the water and chemicals (salts) for reuse purposes. The study of the reusability of nanofiltered water for dyeing has been given little or no ...

  8. Technology and human issues in reusing learning objects

    NARCIS (Netherlands)

    Collis, Betty; Strijker, A.

    2004-01-01

    Reusing learning objects is as old as retelling a story or making use of libraries and textbooks, and in electronic form has received an enormous new impetus because of the World Wide Web and Web technologies. Are we at the brink of changing the "shape and form of learning, ... of being able to

  9. The domain theory: patterns for knowledge and software reuse

    National Research Council Canada - National Science Library

    Sutcliffe, Alistair

    2002-01-01

    ..., retrieval system, or any other means, without prior written permission of the publisher. Lawrence Erlbaum Associates, Inc., Publishers 10 Industrial Avenue Mahwah, New Jersey 07430 Library of Congress Cataloging-in-Publication Data Sutcliffe, Alistair, 1951- The domain theory : patterns for knowledge and software reuse / Alistair Sutcl...

  10. Characterization of winery wastewater for reuse in California

    Science.gov (United States)

    More than thirty percent of the United States is currently in a drought that is expected to have profound social, economic, and environmental impacts. The intensification of drought conditions in southern and western regions of the country has spurred interest in wastewater reuse in agriculture, inc...

  11. Reuse of waste cutting sand at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Mathews, S.; Wilson, K.

    1998-01-01

    Lawrence Livermore National Laboratory (LLNL) examined the waste stream from a water jet cutting operation, to evaluate the possible reuse of waste garnet sand. The sand is a cutting agent used to shape a variety of materials, including metals. Nearly 70,000 pounds of waste sand is generated annually by the cutting operation. The Environmental Protection Department evaluated two potential reuses for the spent garnet sand: backfill in utility trenches; and as a concrete constituent. In both applications, garnet waste would replace the sand formerly purchased by LLNL for these purposes. Findings supported the reuse of waste garnet sand in concrete, but disqualified its proposed application as trench backfill. Waste sand stabilized in a concrete matrix appeared to present no metals-leaching hazard; however, unconsolidated sand in trenches could potentially leach metals in concentrations high enough to threaten ground water quality. A technical report submitted to the San Francisco Bay Regional Water Quality Control Board was reviewed and accepted by that body. Reuse of waste garnet cutting sand as a constituent in concrete poured to form walkways and patios at LLNL was approved

  12. The reuse of scrap and decontamination waste water from decommissioning

    International Nuclear Information System (INIS)

    Deng Junxian; Li Xin; Xie Xiaolong

    2010-01-01

    Huge amount of radioactive scrap with low activity will be generated from reactor decommissioning; the decontamination is concentrated in the surface layer of the scrap. The decontaminated substance can be removed by high pressure water jet to appear the base metal and to reuse the metal. Big amount of radioactive waste water will be generated by this decontamination technology; the radioactive of the waste water is mainly caused by the solid particle from decontamination. To remove the solid particle as clean as possible, the waste water can be reused. Different possible technology to remove the solid particle from the water had been investigated, such as the gravity deposit separation, the filtration and the centrifugal separation etc. The centrifugal separation technology is selected; it includes the hydraulic vortex, the centrifugal filtration and the centrifugal deposit. After the cost benefit analysis at last the centrifugal deposit used butterfly type separator is selected. To reuse the waste water the fresh water consumption and the cost for waste water treatment can be reduced. To reuse the radioactive scrap and the waste water from decommissioning will minimize the radioactive waste. (authors)

  13. Treatment and reuse for irrigation of wastewater in Cagliari

    International Nuclear Information System (INIS)

    Bragadin, G.L.; Franco, D.; Mancini, M.L.

    2006-01-01

    D.M. 12 June 2003 n. 185 gives national rules about wastewater recycling and reuse. Increasing in water consumption for new agricultural practise and uncertainty about availability of water resource in summer due to climatic instability make necessary to search new available fonts. In most part of Italian territory surface water volumes are taken into civil water distribution system for domestic use and, in summer, rivers are often in dry condition before arriving in urban tracts and in quality condition typical of domestic wastewater more or less treated in downstream. This work explains an experience in reclamation and irrigation reuse of a large flowrate of domestic wastewater carried out in Cagliari and discuss results in order to test reliability and efficiency with reference to existent Italian laws about discharge (D.Lgs n. 152/99) and reuse (D.M. n. 185/2003). Simbrizzi artificial basin make possible agricultural recycling and reuse realizing adequate retention basins for storage and final finishing of wastewater, at the same time permits to avoid every discharge in seawater during summer [it

  14. Evaluation of optimal reuse system for hydrofluoric acid wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Won, Chan-Hee [Department of Environmental Engineering, Chonbuk National University, 567 Bakje-daero, Deokjin-Gu, Jeonju, Jeollabuk-Do, 561-756 (Korea, Republic of); Choi, Jeongyun [R and D Center, Samsung Engineering Co. Ltd., 415-10 Woncheon-Dong, Youngtong-Gu, Suwon, Gyeonggi-Do, 443-823 (Korea, Republic of); Chung, Jinwook, E-mail: jin-wook.chung@samsung.com [R and D Center, Samsung Engineering Co. Ltd., 415-10 Woncheon-Dong, Youngtong-Gu, Suwon, Gyeonggi-Do, 443-823 (Korea, Republic of)

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer Coagulation and ion exchange technologies were ineffective in removing fluoride. Black-Right-Pointing-Pointer Polyamide RO was more efficacious than cellulose RO due to its high flux and rejection. Black-Right-Pointing-Pointer Spiral wound RO system was more preferential to disc tube RO system for reusing raw hydrofluoric acid wastewater. Black-Right-Pointing-Pointer Combined coagulation and RO technology can be applied to reuse raw hydrofluoric acid wastewater. - Abstract: The treatment of hydrofluoric acid (HF) wastewater has been an important environmental issue in recent years due to the extensive use of hydrofluoric acid in the chemical and electronics industries, such as semiconductor manufacturers. Coagulation/precipitation and ion exchange technologies have been used to treat HF wastewater, but these conventional methods are ineffective in removing organics, salts, and fluorides, limiting its reuse for water quality and economic feasibility. One promising alternative is reverse osmosis (RO) after lime treatment. Based on pilot-scale experiment using real HF wastewater discharged from semiconductor facility, the spiral wound module equipped with polyamide membranes has shown excellent flux and chemical cleaning cycles. Our results suggest that coagulation/precipitation and spiral wound RO constitute the optimal combination to reuse HF wastewater.

  15. Using Linked Open Data to Improve Data Reuse in Zooarchaeology

    Directory of Open Access Journals (Sweden)

    Sarah Whitcher Kansa

    2015-12-01

    Full Text Available The inability of journals and books to accommodate data and to make it reusable has led to the gradual loss of vast amounts of information. The practice of disseminating selected sub-sets of data (usually in summary tables permits only very limited types of reuse, and thus hampers scholarship. In recent years, largely in response to increasing government and institutional requirements for full data access, the scholarly community is giving data more attention, and solutions for data management are emerging. However, seeing data management primarily as a matter of compliance means that the research community faces continued data loss, as many datasets enter repositories without adequate description to enable their reuse. Furthermore, because many archaeologists do not yet have experience in data reuse, they lack understanding of what “good” data management means in terms of their own research practices. This paper discusses Linked Open Data (LOD as an approach to improving data description, intelligibility and discoverability to facilitate reuse. I present examples of how annotating zooarchaeology datasets with LOD can facilitate data integration without forcing standardization. I conclude by recognizing that data sharing is not without its challenges. However, the research community’s careful attention and recognition of datasets as valuable scholarly outputs will go a long way toward ensuring that the products of our work are more widely useful.

  16. Application Reuse Library for Software, Requirements, and Guidelines

    Science.gov (United States)

    Malin, Jane T.; Thronesbery, Carroll

    1994-01-01

    Better designs are needed for expert systems and other operations automation software, for more reliable, usable and effective human support. A prototype computer-aided Application Reuse Library shows feasibility of supporting concurrent development and improvement of advanced software by users, analysts, software developers, and human-computer interaction experts. Such a library expedites development of quality software, by providing working, documented examples, which support understanding, modification and reuse of requirements as well as code. It explicitly documents and implicitly embodies design guidelines, standards and conventions. The Application Reuse Library provides application modules with Demo-and-Tester elements. Developers and users can evaluate applicability of a library module and test modifications, by running it interactively. Sub-modules provide application code and displays and controls. The library supports software modification and reuse, by providing alternative versions of application and display functionality. Information about human support and display requirements is provided, so that modifications will conform to guidelines. The library supports entry of new application modules from developers throughout an organization. Example library modules include a timer, some buttons and special fonts, and a real-time data interface program. The library prototype is implemented in the object-oriented G2 environment for developing real-time expert systems.

  17. Water sector fund (CT-hi dro) and wastewater reuse activities: initiatives to promote environment ally sustainable development in Brazil

    International Nuclear Information System (INIS)

    Leitao, S.A.M.

    2005-01-01

    The Brazilian Water Sector Fund (CT-Hidro) is presented as an innovative mechanism to foster the scientific and technological sector of the country as well as a model instrument to promote environmentally sustainable development in Brazil and in other developing countries. CT-Hidro is shown as an instrument that provides support for scientific and technological development research activities in the following areas: experimental technological development, scientific and technological research projects, development of basic industrial technology and implantation of research infrastructure. CT-Hidro is presented as a key mechanism to finance wastewater reuse projects as an imperative action to fight poverty and promote social inclusion in Brazil. The concept of wastewater reuse for beneficial purposes is presented. Its growing importance as an essential part of the planning of the integrated and sustainable water resources management is also evidenced. In this perspective, the need for sanitation, wastewater treatment and its reuse in agriculture for food production are presented as imperative measures that must be taken in Brazil in order to promote sustainable development, fight poverty, improve public health conditions and enhance environmental quality in the country. (author)

  18. Settling and survival profile of enteric pathogens in the swine effluent for water reuse purpose.

    Science.gov (United States)

    Fongaro, G; Kunz, A; Magri, M E; Schissi, C D; Viancelli, A; Philippi, L S; Barardi, C R M

    2016-11-01

    The present study evaluated the pathogens persistence and settling profile in swine effluent. We determined the enteric pathogens settling characteristics, their survival and inactivation profile in swine effluent (for water reuse purpose) and in sludge (generated after aerobic treatment - during secondary settling process). The study was performed in laboratorial-scale and in full-scale (manure treatment plant). Enteric viruses and enteric bacteria were used as biomarkers. Results showed that these enteric pathogens were significantly reduced from swine effluent during secondary settling process, and enteric viruses removal was correlated with the suspended solids decantation. The design of secondary settlers can be adapted to improve pathogens removal, by diminishing the solids loading rate per area and time, ending in higher hydraulic retention times. Copyright © 2016 Elsevier GmbH. All rights reserved.

  19. HANDBOOK ON THE BENEFITS, COSTS, AND IMPACTS OF LAND CLEANUP AND REUSE

    Science.gov (United States)

    Summarizes the theoretical and empirical literature addressing benefit-cost and impact assessment of the land cleanup and reuse scenario. When possible, recommendations are provided for conducting economic analysis of land cleanup and reuse sites and programs. The knowledge base ...

  20. A Spike Cocktail Approach to Improve Microbial Performance Monitoring for Water Reuse

    Science.gov (United States)

    Water reuse, via either centralized treatment of traditional wastewater or decentralized treatment and on-site reuse, is becoming an increasingly important element of sustainable water management. Despite advances in waterborne pathogen detection methods, low and highly variable ...

  1. A Water Chemistry Perspective on Flowback Reuse with Several Case Studies, March 30, 2011

    Science.gov (United States)

    This presentation discusses the reuse of frac flowback from a water chemistry perspective. Two examples of flowback reuse, where a minimal water treatment has been used, describe the rationale for why the practice is considered acceptable.

  2. Governing the reuse of treated wastewater in irrigation : the case study of Jericho, Palestine

    NARCIS (Netherlands)

    Al-Khatib, Nasser; Shoqeir, Jawad A.H.; Özerol, Gül; Majaj, Linda

    2017-01-01

    Wastewater reuse in irrigation provides additional water supply for agriculture and saves freshwater resources for human consumption. Through these benefits, wastewater reuse can significantly alleviate the water scarcity in Palestine and fit to the complexity of the geopolitical context. However,

  3. Reclamation and reuse of LEU silicide fuel from manufacturing scrap

    International Nuclear Information System (INIS)

    Gale, G.R.; Pace, B.W.; Evans, R.S.

    2004-01-01

    In order to provide an understanding of the organization which is the sole supplier of United States plate type research and test reactor fuel and LEU core conversions, a brief description of the structure and history is presented. Babcock and Wilcox (B and W) is a part of McDermott International, Inc. which is a large diversified corporation employing over 20,000 people primarily in engineering and construction for the off-shore oil and power generation industries throughout the world. B and W provides many energy related products requiring precision machining and high quality systems. This is accomplished by using state-of-the-art equipment, technology and highly skilled people. The RTRFE group within B and W has the ability to produce various complexly shaped fuel elements with a wide variety of fuels and enrichments. B and W RTRFE has fabricated over 200,000 plates since 1981 and gained the diversified experience necessary to satisfy many customer requirements. This accomplishment was possible with the support of McDermott International and all of its resources. B and W has always had a commitment to high quality and integrity. This is apparent by the success and longevity (125 years) of the company. A lower cost to convert cores to LEU provides direct support to RERTR and demonstrates Babcock and Wilcox's commitment to the program. As a supporter of RERTR reactor conversion from HEU to LEU, B and W has contributed a significant amount of R and D money to improve the silicide fuel process which ultimately lowers the LEU core costs. In the most recent R and D project, B and W is constructing a LEU silicide reclamation facility to re-use the unirradiated fuel scrap generated from the production process. Remanufacturing use of this fuel completes the fuel cycle and provides a contribution to LEU cores by reducing scrap inventory and handling costs, lowering initial purchase of fuel due to increasing the process yields, and lowering the replacement costs. This

  4. Textile wastewater reuse after additional treatment by Fenton's reagent.

    Science.gov (United States)

    Ribeiro, Marília Cleto Meirelles; Starling, Maria Clara V M; Leão, Mônica Maria Diniz; de Amorim, Camila Costa

    2017-03-01

    This study verifies textile wastewater reuse treated by the conventional activated sludge process and subjected to further treatment by advanced oxidation processes. Three alternative processes are discussed: Fenton, photo-Fenton, and UV/H 2 O 2 . Evaluation of treatments effects was based on factorial experiment design in which the response variables were the maximum removal of COD and the minimum concentration of residual H 2 O 2 in treated wastewater. Results indicated Fenton's reagent, COD/[H 2 O 2 ]/[Fe 2+ ] mass ratio of 1:2:2, as the best alternative. The selected technique was applied to real wastewater collected from a conventional treatment plant of a textile mill. The quality of the wastewater before and after the additional treatment was monitored in terms of 16 physicochemical parameters defined as suitable for the characterization of waters subjected to industrial textile use. The degradation of the wastewater was also evaluated by determining the distribution of its molecular weight along with the organic matter fractionation by ultrafiltration, measured in terms of COD. Finally, a sample of the wastewater after additional treatment was tested for reuse at pilot scale in order to evaluate the impact on the quality of dyed fabrics. Results show partial compliance of treated wastewater with the physicochemical quality guidelines for reuse. Removal and conversion of high and medium molecular weight substances into low molecular weight substances was observed, as well as the degradation of most of the organic matter originally present in the wastewater. Reuse tests indicated positive results, confirming the applicability of wastewater reuse after the suggested additional treatment. Graphical abstract Textile wastewater samples after additional treatment by Fenton's reagent, photo-Fenton and H 2 O 2 /UV tested in different conditions.

  5. Greywater reuse: A strategy for water demand management in Harare?

    Science.gov (United States)

    Madungwe, Emaculate; Sakuringwa, Saniso

    Greywater is wastewater from baths, sinks and washing machines, accounting for about 60% of the outflow from homes. It contains little pathogens and 90% less nitrogen than toilet water, so does not require the same treatment process. With the increasing demand for freshwater, its use may reduce irrigation water needs, increasing its availability of freshwater for other primary uses. Agriculture is the main water consumer in Africa, which cannot be compromised due to its role in domestic food security and export supplies. The purpose of this paper is to demonstrate findings of the research done on benefits of greywater reuse in some countries, applicable to African countries. In Australia, greywater reuse has reduced freshwater demand, strain on wastewater treatment plants and energy consumption. Aquifer recharge has improved due to increased infiltration flows from greywater uses. In Lebanon, greywater is a valuable resource for encouraging plant growth from nutrients that may otherwise have been wasted. Palestine shares similar climate and water scarcity conditions with most arid sub-Saharan African countries, yet utilizes grey water in production of crops and citrus fruits. Thus use of grey water should be possible in African cities such as Harare, where nearly two thirds of the population rely on agriculture for livelihoods. The problem of blue green algae in sewerage ponds and water reservoirs is significantly reduced by household reuse of grey water in Mexico. Water savings are increased and expenses reduced, as illustrated by the reduction in consumption of municipality freshwater supplies in South African urban areas. Rural communities and schools in Namibia and Egypt have raised funds from grey water reuse in banana plantations. A possible constraint to this strategy could be the unavailability of appropriate technology for primary treatment of grey water before reuse. This strategy may pose health risks where water quality tests are unknown or unavailable

  6. Implementation proposal of a water conservation and reuse program at the TRANSPETRO; Proposta de implementacao de um programa de conservacao e reuso de agua na TRANSPETRO

    Energy Technology Data Exchange (ETDEWEB)

    Martini, Andrea Dietrich; Alves, Anibal Jose Constantino; Melo Neto, Joao Evangelista de [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The great amount of water that is used by industries and the ascendant preoccupation about the quantity and quality of water resources in Brazil and in the world are important justifications to start thinking of more efficient proposals for water application. Between the alternatives for water consume reduction in industry there is the reuse as the principle of those. A study of PricewaterhouseCoopers about this matter at the main national industries identified that 48% have reuse goals. The present work intends to show a methodology and the justifications to implement a conservation and water reuse program at the Terminals of PETROBRAS Transporte S.A. - TRANSPETRO. Therefore are presented the many possible applications for reuse water at TRANSPETRO and the stages to the implementation of this kind of project. The methodology presented, based on FIESP Proposal, has as the objective both water consumed reduction and water discharged reduction. Then it must be realized an identification of several water consumed sources and water discharged sources, focusing on the many reuse possible. (author)

  7. Perceptions of Different Stakeholders on Reclaimed Water Reuse: The Case of Beijing, China

    OpenAIRE

    Weiping Chen; Yanying Bai; Weiling Zhang; Sidan Lyu; Wentao Jiao

    2015-01-01

    Public involvement is critical to the successful implementation of reclaimed water reuse programs. Based on the participatory research method, we studied the attitudes of the stakeholders who are involved in reclaimed water reuse in Beijing, China. Results showed that the general public’s knowledge on water resources was poor, while their awareness on reclaimed water reuse was high. The general public showed a strong acceptance of non-contact and non-potable reclaimed water reuse, but their a...

  8. Environmental re-adaptations of farms seeking to the water contamination reduction (Itaipu/UNIOESTE integrated project); Readequacao ambiental de propriedades rurais visando a reducao de contaminacao das aguas (Projeto integrado Itaipu/UNIOESTE)

    Energy Technology Data Exchange (ETDEWEB)

    Daga, Jacir; Campos, Alessandro Torres; Navarini, Franciele; Matsuo, Melissa [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Grupo de Pesquisas em Ambiencia; Feiden, Armin [Universidade Estadual do Oeste do Paran (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciencias Agrarias

    2004-07-01

    The work is destined to diagnose and to elaborate environmental adaptation projects in agricultural properties located in the micro basins: Arroio Fundo, Corregos Curvado and Ajuricaba, selected and located in the Rio Sao Francisco Verdadeiro basin, in the west Parana State area, by means of accord between ITAIPU Binational and UNIOESTE (West Parana State University). Four hundred and forty farms properties will be visited in a eleven months period. It will be lifted up environmental problems, in what it refers the ciliary forest, law reserves, fishing, crops, production and handling of dejections by: swine, dairy cattle, as well as readaptations projects of the farms in the areas of the micro basins, seeking to the environmental adaptation, reducing, consequently, the contamination of the waters that provisions the ITAIPU reservoir. The projects will be leaded to the IAP (Parana State environmental organ), by ITAIPU, for the environmental norms adaptation of the farms. Besides the environmental preservation and sustainability, with the environmental adaptations, ITAIPU will also benefit with the reduction of the ITAIPU lake water contamination, which arrives to the turbines. (author)

  9. The role of soil quality maps in the reuse of lightly contaminated soil

    NARCIS (Netherlands)

    Lamé, F.P.J.; Leenaers, H.; Zegwaard, J.

    2000-01-01

    In 1999 the Dutch government agreed on a new policy regarding the reuse of lightly contaminated soil. From now on, lightly contaminated soil may be reused under conditions of soil-quality management. The municipal authorities supervise the reuse under this new regime. Two basic criteria need to be

  10. Economic Input-Output Life Cycle Assessment of Water Reuse Strategies in Residential Buildings

    Science.gov (United States)

    This paper evaluates the environmental sustainability and economic feasibility of four water reuse designs through economic input-output life cycle assessments (EIO-LCA) and benefit/cost analyses. The water reuse designs include: 1. Simple Greywater Reuse System for Landscape Ir...

  11. Grey Water Reuse for Agricultural Purposes in the Jordan Valley: Household Survey Results in Deir Alla

    Directory of Open Access Journals (Sweden)

    Sharon B. Megdal

    2012-08-01

    Full Text Available Installation of decentralized grey water treatment systems in small rural communities contributes to a more sustainable water supply. In order to gauge community attitudes about collection and use of grey water, a door-to-door survey in the farming community of Deir Alla, Jordan was conducted by Royal Scientific Society interviewers. Outcomes of a detailed survey, designed specifically for this project, offer insights on people’s views on general water and wastewater issues, as well as their motivation, practices and concerns related to using grey water treatment for a portion of their household wastewater and reuse of the treated grey water for irrigation. A total of 47 respondents from different socio-economic background, aged over 18 years, from this community in the Jordan valley took part in the survey. The level of formal education of the respondents was low, and most of households’ incomes were below the poverty line in Jordan. Most of the respondents reported that the quality of water supplied by public network is acceptable, but the quantity is insufficient to meet their demand, with supplies being delivered to the household once a week. Respondents relied on the public water network as a first-most important resource (85.1%, and 57.4% of the respondent relied on private water tankers as a second-most important resource in addition to the public network. However, 6% of the respondents relied only on private water tankers with no access to the public network. Storage tanks are common practice in all the houses in order to store enough water for at least one week. The survey responses provide evidence that rural communities are willing to accept reuse of treated grey water for irrigation. Furthermore, some of people in the studied area are willing to learn more about grey water treatment and reuse in order to operate grey water systems for irrigation purposes. Water scarcity in this rural area of Jordan is the main determinant of

  12. The ATLAS online High Level Trigger framework: Experience reusing offline software components in the ATLAS trigger

    International Nuclear Information System (INIS)

    Wiedenmann, Werner

    2010-01-01

    Event selection in the ATLAS High Level Trigger is accomplished to a large extent by reusing software components and event selection algorithms developed and tested in an offline environment. Many of these offline software modules are not specifically designed to run in a heavily multi-threaded online data flow environment. The ATLAS High Level Trigger (HLT) framework based on the GAUDI and ATLAS ATHENA frameworks, forms the interface layer, which allows the execution of the HLT selection and monitoring code within the online run control and data flow software. While such an approach provides a unified environment for trigger event selection across all of ATLAS, it also poses strict requirements on the reused software components in terms of performance, memory usage and stability. Experience of running the HLT selection software in the different environments and especially on large multi-node trigger farms has been gained in several commissioning periods using preloaded Monte Carlo events, in data taking periods with cosmic events and in a short period with proton beams from LHC. The contribution discusses the architectural aspects of the HLT framework, its performance and its software environment within the ATLAS computing, trigger and data flow projects. Emphasis is also put on the architectural implications for the software by the use of multi-core processors in the computing farms and the experiences gained with multi-threading and multi-process technologies.

  13. Proposing nanofiltration as acceptable barrier for organic contaminants in water reuse

    KAUST Repository

    Yangali-Quintanilla, Victor

    2010-10-01

    For water reuse applications, " tight" nanofiltration (NF) membranes (of polyamide) as an alternative to reverse osmosis (RO) can be an effective barrier against pharmaceuticals, pesticides, endocrine disruptors and other organic contaminants. The use of RO in existing water reuse facilities is addressed and questioned, taking into consideration that tight NF can be a more cost-effective and efficient technology to target the problem of organic contaminants. It was concluded that tight NF is an acceptable barrier for organic contaminants because its removal performance approaches that of RO, and because of reduced operation and maintenance (O&M) costs in long-term project implementation. Average removal of neutral compounds (including 1,4-dioxane) was about 82% and 85% for NF and RO, respectively, and average removal of ionic compounds was about 97% and 99% for NF and RO, respectively. In addition, " loose" NF after aquifer recharge and recovery (ARR) can be an effective barrier against micropollutants with removals over 90%. When there is the presence of difficult to remove organic contaminants such as NDMA and 1,4-dioxane; for 1,4-dioxane, source control or implementation of treatment processes in wastewater treatment plants will be an option; for NDMA, a good strategy is to limit its formation during wastewater treatment, but there is evidence that biodegradation of NDMA can be achieved during ARR. © 2010 Elsevier B.V.

  14. Adaptive ethnography

    DEFF Research Database (Denmark)

    Berth, Mette

    2005-01-01

    This paper focuses on the use of an adaptive ethnography when studying such phenomena as young people's use of mobile media in a learning perspective. Mobile media such as PDAs and mobile phones have a number of affordances which make them potential tools for learning. However, before we begin to...... formal and informal learning contexts. The paper also proposes several adaptive methodological techniques for studying young people's interaction with mobiles.......This paper focuses on the use of an adaptive ethnography when studying such phenomena as young people's use of mobile media in a learning perspective. Mobile media such as PDAs and mobile phones have a number of affordances which make them potential tools for learning. However, before we begin...... to design and develop educational materials for mobile media platforms we must first understand everyday use and behaviour with a medium such as a mobile phone. The paper outlines the research design for a PhD project on mobile learning which focuses on mobile phones as a way to bridge the gap between...

  15. One project`s waste is another project`s resource

    Energy Technology Data Exchange (ETDEWEB)

    Short, J.

    1997-02-01

    The author describes the efforts being made toward pollution prevention within the DOE complex, as a way to reduce overall project costs, in addition to decreasing the amount of waste to be handled. Pollution prevention is a concept which is trying to be ingrained into project planning. Part of the program involves the concept that ultimately the responsibility for waste comes back to the generator. Parts of the program involve efforts to reuse materials and equipment on new projects, to recycle wastes to generate offsetting revenue, and to increase awareness, accountability and incentives so as to stimulate action on this plan. Summaries of examples are presented in tables.

  16. Stakeholder Choices in Adaptation and Public Finance Planning for Coastal Hazard Mitigation in a Changing World: Highlights from Case Studies in Santos, Brazil, Broward County, FL, US and Selsey, UK (The METROPOLE Project)

    Science.gov (United States)

    Muller-Karger, F. E.; Merrill, S.; Pelling, M.; Marengo, J. A.; Reynolds, C. J.; Langbehn, K.; Paterson, S.; Nunes, L. H.; Kartez, J.; Lockman, J. T.

    2016-12-01

    Better integration of the human dimensions (values, beliefs, cultural identity, place, risk perceptions, communications, decision making) with scientific, technical, and economic data is required to advance effective municipal planning for adaptation to changes that can be expected to occur based on a changing climate. The international METROPOLE project offers practical insights and a path forward for coastal communities around the world with results from applied research carried out by social scientists, natural scientists, and practitioners working in coastal municipalities in Brazil, the United Kingdom, and the United States. Decision makers were interviewed to assess the Adaptive Capacity of their communities, and stakeholders were engaged in workshops to discuss the risks due to projected sea level rise (SLR) in terms of impacts and costs to property. The team investigated the social, cultural, and governance factors that shape decision making. Municipal leaders and local experts selected the SLR scenarios and adaptation options to be modelled using COAST, a state-of-the-art tool. The visualizations and risk maps integrated scientific and local economic data, and illustrated the potential impacts on 10,000 properties in each study area. Stakeholders voted on parameters to determine the cost-benefit ratio of potential adaptation options. Stakeholder priorities for local adaption planning, agreement with the need for increased fees/taxes, and acceptability of possible public finance mechanisms were evaluated with pre- and post-workshop surveys. The research identified similar patterns of adaptation "priorities" and new insight into how stakeholders consider public finance mechanisms for local action, in the context of "fiscal benefits and burdens." The research suggests implications for small towns, land-use policy changes, implementing adaptation options which deliver short and long-term benefits, and, for state and local governments to develop finance policy

  17. Comparison of applied dose and image quality in staging CT of neuroendocrine tumor patients using standard filtered back projection and adaptive statistical iterative reconstruction

    International Nuclear Information System (INIS)

    Böning, G.; Schäfer, M.; Grupp, U.; Kaul, D.; Kahn, J.; Pavel, M.; Maurer, M.; Denecke, T.; Hamm, B.; Streitparth, F.

    2015-01-01

    Highlights: • Iterative reconstruction (IR) in staging CT provides equal objective image quality compared to filtered back projection (FBP). • IR delivers excellent subjective quality and reduces effective dose compared to FBP. • In patients with neuroendocrine tumor (NET) or may other hypervascular abdominal tumors IR can be used without scarifying diagnostic confidence. - Abstract: Objective: To investigate whether dose reduction via adaptive statistical iterative reconstruction (ASIR) affects image quality and diagnostic accuracy in neuroendocrine tumor (NET) staging. Methods: A total of 28 NET patients were enrolled in the study. Inclusion criteria were histologically proven NET and visible tumor in abdominal computed tomography (CT). In an intraindividual study design, the patients underwent a baseline CT (filtered back projection, FBP) and follow-up CT (ASIR 40%) using matched scan parameters. Image quality was assessed subjectively using a 5-grade scoring system and objectively by determining signal-to-noise ratio (SNR) and contrast-to-noise ratios (CNRs). Applied volume computed tomography dose index (CTDI vol ) of each scan was taken from the dose report. Results: ASIR 40% significantly reduced CTDI vol (10.17 ± 3.06 mGy [FBP], 6.34 ± 2.25 mGy [ASIR] (p < 0.001) by 37.6% and significantly increased CNRs (complete tumor-to-liver, 2.76 ± 1.87 [FBP], 3.2 ± 2.32 [ASIR]) (p < 0.05) (complete tumor-to-muscle, 2.74 ± 2.67 [FBP], 4.31 ± 4.61 [ASIR]) (p < 0.05) compared to FBP. Subjective scoring revealed no significant changes for diagnostic confidence (5.0 ± 0 [FBP], 5.0 ± 0 [ASIR]), visibility of suspicious lesion (4.8 ± 0.5 [FBP], 4.8 ± 0.5 [ASIR]) and artifacts (5.0 ± 0 [FBP], 5.0 ± 0 [ASIR]). ASIR 40% significantly decreased scores for noise (4.3 ± 0.6 [FBP], 4.0 ± 0.8 [ASIR]) (p < 0.05), contrast (4.4 ± 0.6 [FBP], 4.1 ± 0.8 [ASIR]) (p < 0.001) and visibility of small structures (4.5 ± 0.7 [FBP], 4.3 ± 0.8 [ASIR]) (p < 0

  18. Comparison of applied dose and image quality in staging CT of neuroendocrine tumor patients using standard filtered back projection and adaptive statistical iterative reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Böning, G., E-mail: georg.boening@charite.de [Department of Radiology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany); Schäfer, M.; Grupp, U. [Department of Radiology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany); Kaul, D. [Department of Radiation Oncology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany); Kahn, J. [Department of Radiology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany); Pavel, M. [Department of Gastroenterology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany); Maurer, M.; Denecke, T.; Hamm, B.; Streitparth, F. [Department of Radiology, Charité, Humboldt-University Medical School, Charitéplatz 1, 10117 Berlin (Germany)

    2015-08-15

    Highlights: • Iterative reconstruction (IR) in staging CT provides equal objective image quality compared to filtered back projection (FBP). • IR delivers excellent subjective quality and reduces effective dose compared to FBP. • In patients with neuroendocrine tumor (NET) or may other hypervascular abdominal tumors IR can be used without scarifying diagnostic confidence. - Abstract: Objective: To investigate whether dose reduction via adaptive statistical iterative reconstruction (ASIR) affects image quality and diagnostic accuracy in neuroendocrine tumor (NET) staging. Methods: A total of 28 NET patients were enrolled in the study. Inclusion criteria were histologically proven NET and visible tumor in abdominal computed tomography (CT). In an intraindividual study design, the patients underwent a baseline CT (filtered back projection, FBP) and follow-up CT (ASIR 40%) using matched scan parameters. Image quality was assessed subjectively using a 5-grade scoring system and objectively by determining signal-to-noise ratio (SNR) and contrast-to-noise ratios (CNRs). Applied volume computed tomography dose index (CTDI{sub vol}) of each scan was taken from the dose report. Results: ASIR 40% significantly reduced CTDI{sub vol} (10.17 ± 3.06 mGy [FBP], 6.34 ± 2.25 mGy [ASIR] (p < 0.001) by 37.6% and significantly increased CNRs (complete tumor-to-liver, 2.76 ± 1.87 [FBP], 3.2 ± 2.32 [ASIR]) (p < 0.05) (complete tumor-to-muscle, 2.74 ± 2.67 [FBP], 4.31 ± 4.61 [ASIR]) (p < 0.05) compared to FBP. Subjective scoring revealed no significant changes for diagnostic confidence (5.0 ± 0 [FBP], 5.0 ± 0 [ASIR]), visibility of suspicious lesion (4.8 ± 0.5 [FBP], 4.8 ± 0.5 [ASIR]) and artifacts (5.0 ± 0 [FBP], 5.0 ± 0 [ASIR]). ASIR 40% significantly decreased scores for noise (4.3 ± 0.6 [FBP], 4.0 ± 0.8 [ASIR]) (p < 0.05), contrast (4.4 ± 0.6 [FBP], 4.1 ± 0.8 [ASIR]) (p < 0.001) and visibility of small structures (4.5 ± 0.7 [FBP], 4.3 ± 0.8 [ASIR]) (p < 0

  19. Multilevel risk factors and developmental assets for internalizing symptoms and self-esteem in disadvantaged adolescents: modeling longitudinal trajectories from the Rural Adaptation Project.

    Science.gov (United States)

    Smokowski, Paul R; Guo, Shenyang; Rose, Roderick; Evans, Caroline B R; Cotter, Katie L; Bacallao, Martica

    2014-11-01

    The current study filled significant gaps in our knowledge of developmental psychopathology by examining the influence of multilevel risk factors and developmental assets on longitudinal trajectories of internalizing symptoms and self-esteem in an exceptionally culturally diverse sample of rural adolescents. Integrating ecological and social capital theories, we explored if positive microsystem transactions are associated with self-esteem while negative microsystem transactions increase the chances of internalizing problems. Data came from the Rural Adaptation Project, a 5-year longitudinal panel study of more than 4,000 middle school students from 28 public schools in two rural, disadvantaged counties in North Carolina. Three-level hierarchical linear modeling models were estimated to predict internalizing symptoms (e.g., depression, anxiety) and self-esteem. Relative to other students, risk for internalizing problems and low self-esteem was elevated for aggressive adolescents, students who were hassled or bullied at school, and those who were rejected by peers or in conflict with their parents. Internalizing problems were also more common among adolescents from socioeconomically disadvantaged families and neighborhoods, among those in schools with more suspensions, in students who reported being pressured by peers, and in youth who required more teacher support. It is likely that these experiences left adolescents disengaged from developing social capital from ecological microsystems (e.g., family, school, peers). On the positive side, support from parents and friends and optimism about the future were key assets associated with lower internalizing symptoms and higher self-esteem. Self-esteem was also positively related to religious orientation, school satisfaction, and future optimism. These variables show active engagement with ecological microsystems. The implications and limitations were discussed.

  20. Comparison of applied dose and image quality in staging CT of neuroendocrine tumor patients using standard filtered back projection and adaptive statistical iterative reconstruction.

    Science.gov (United States)

    Böning, G; Schäfer, M; Grupp, U; Kaul, D; Kahn, J; Pavel, M; Maurer, M; Denecke, T; Hamm, B; Streitparth, F

    2015-08-01

    To investigate whether dose reduction via adaptive statistical iterative reconstruction (ASIR) affects image quality and diagnostic accuracy in neuroendocrine tumor (NET) staging. A total of 28 NET patients were enrolled in the study. Inclusion criteria were histologically proven NET and visible tumor in abdominal computed tomography (CT). In an intraindividual study design, the patients underwent a baseline CT (filtered back projection, FBP) and follow-up CT (ASIR 40%) using matched scan parameters. Image quality was assessed subjectively using a 5-grade scoring system and objectively by determining signal-to-noise ratio (SNR) and contrast-to-noise ratios (CNRs). Applied volume computed tomography dose index (CTDIvol) of each scan was taken from the dose report. ASIR 40% significantly reduced CTDIvol (10.17±3.06mGy [FBP], 6.34±2.25mGy [ASIR] (pASIR]) (pASIR]) (pASIR]), visibility of suspicious lesion (4.8±0.5 [FBP], 4.8±0.5 [ASIR]) and artifacts (5.0±0 [FBP], 5.0±0 [ASIR]). ASIR 40% significantly decreased scores for noise (4.3±0.6 [FBP], 4.0±0.8 [ASIR]) (pASIR]) (pASIR]) (pASIR can be used to reduce radiation dose without sacrificing image quality and diagnostic confidence in staging CT of NET patients. This may be beneficial for patients with frequent follow-up and significant cumulative radiation exposure. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.