75 FR 20384 - Chrysler LLC, St. Louis North Assembly Plant, Including On-Site Leased Workers From Haas TCM, Inc...

Science.gov (United States)

2010-04-19

.... Diversified Contract Service, Inc. 639, and Logistics Management Services, Inc. Fenton, MO; Amended... Logistics Management Services, Inc. worked on-site at the Chrysler LLC, Fenton, Missouri plant (Logistics... Department is amending this certification to include workers leased from Logistics Management Services, Inc...

Onsite Distributed Generation Systems For Laboratories, Laboratories for the 21st Century: Best Practices (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2011-09-01

This guide provides general information on implementing onsite distributed generation systems in laboratory environments. Specific technology applications, general performance information, and cost data are provided to educate and encourage laboratory energy managers to consider onsite power generation or combined heat and power (CHP) systems for their facilities. After conducting an initial screening, energy managers are encouraged to conduct a detailed feasibility study with actual cost and performance data for technologies that look promising. Onsite distributed generation systems are small, modular, decentralized, grid-connected, or off-grid energy systems. These systems are located at or near the place where the energy is used. These systems are also known as distributed energy or distributed power systems. DG technologies are generally considered those that produce less than 20 megawatts (MW) of power. A number of technologies can be applied as effective onsite DG systems, including: (1) Diesel, natural gas, and dual-fuel reciprocating engines; (2) Combustion turbines and steam turbines; (3) Fuel cells; (4) Biomass heating; (5) Biomass combined heat and power; (6) Photovoltaics; and (7) Wind turbines. These systems can provide a number of potential benefits to an individual laboratory facility or campus, including: (1) High-quality, reliable, and potentially dispatchable power; (2) Low-cost energy and long-term utility cost assurance, especially where electricity and/or fuel costs are high; (3) Significantly reduced greenhouse gas (GHG) emissions. Typical CHP plants reduce onsite GHG by 40 to 60 percent; (4) Peak demand shaving where demand costs are high; (5) CHP where thermal energy can be used in addition to electricity; (6) The ability to meet standby power needs, especially where utility-supplied power is interrupted frequently or for long periods and where standby power is required for safety or emergencies; and (7) Use for standalone or off

Cross-connected onsite emergency A.C. power supplies for multi-unit nuclear power plant sites

International Nuclear Information System (INIS)

Martore, J.A.; Voss, J.D.; Duncil, B.

1987-01-01

Recently, utility management, both at the corporate and plant operations levels, have reinforced their commitment to assuring increased plant reliability and availability. One means of achieving this objective involves an effective preventive maintenance program with technical specifications which allow implementation of certain preventive maintenance without plant shutdown. To accomplish this, Southern California Edison Company (SCE) has proposed a design change for San Onofre nuclear generating station (SONGS) units 2 and 3 to permit on emergency diesel generator for one unit to perform as an available AC power source for both units. Technical specifications for SCE's SONGS units 2 and 3, as at most nuclear power plants, currently require plant shutdown should one of the two dedicated onsite emergency AC power sources (diesel generators) become inoperable for more than 72 hours. This duration hinders root cause failure analysis, tends to limit the flexibility of preventive maintenance and precludes plant operation in the event of component failure. Therefore, this proposed diesel generator cross-connect design change offers an innovative means for averting plant shutdown should a single diesel generator become inoperable for longer than 72 hours. (orig./GL)

Advanced liquid waste processing technologies: Theoretical versus actual application

International Nuclear Information System (INIS)

Barker, Tracy A.

1992-01-01

This paper provides an overview of Chem-Nuclear Systems, Inc. (CNSI) experience with turn-key chromate removal at the Maine Yankee Nuclear Plant. Theoretical and actual experiences are addressed on topics such as processing duration, laboratory testing, equipment requirements, chromate removal, waste generation, and waste processing. Chromate salts are used in industrial recirculation cooling water systems as a corrosion inhibitor. However, chromates are toxic at concentrations necessary for surface inhibition. As a result, Chem-Nuclear was contracted to perform turn-key chromate removal and waste disposal by demineralization. This project was unique in that prior to on-site mobilization, a composite sample of chromated waste was shipped to CNSI laboratories for treatment through a laboratory scale system. Removal efficiency, process media requirements, and waste processing methodology were determined from this laboratory testing. Samples of the waste resulting from this testing were processed by dewatering and solidification, respectively. TCLP tests were performed on the actual processed waste, and based on the TCLP results, pre-approval for media waste disposal was obtained. (author)

Experiences with on-site power sources at KCB

Energy Technology Data Exchange (ETDEWEB)

Heijnen, B. M.A. [Borssele Nuclear Power Station, N.V. P.Z.E.M., Postbus 48, 4330 AA Middleburg (Netherlands)

1986-02-15

The design of the nuclear power station is of the late sixties. The experiences with the on-site power sources, signal processing and some of the resulting modifications of the design of the power plant are mentioned. In order to let the design satisfy as much as possible present ideas about safety, it was decided to realize a total new and Independent decay heat removal System. With this system a second independent on-site power System is at disposal in case of accident situations. (author)

American National Standard: for facilities and medical care for on-site nuclear-power-plant radiological emergencies

International Nuclear Information System (INIS)

Anon.

1979-01-01

This standard provides guidance for first aid during an emergency and for initial medical care of those persons on-site who are overexposed to penetrating radiation (irradiated). It also provides guidance for medical care of persons contaminated with radioactive material or radionuclides who may also be irradiated or injured as a result of an accident at a nuclear power plant. It provides recommendations for facilities, supplies, equipment, and the extent of care both on-site where first aid and initial care may be provided and off-site at a local hospital where further medical and surgical care may be provided. This initial care continues until either the patient is released or admitted, or referred to another, possibly distant, medical center for definitive care. Recommendations are also provided for the transportation of patients and the training of personnel. Recommendations for specialized care are considered to be beyond the scope of this standard on emergency medical care; however, since emergency and specialized care are related, a brief discussion of specialized care is provided in the Appendix

Recommended criteria for the evaluation of on-site nuclear power plant emergency plans, volume II: criteria

International Nuclear Information System (INIS)

1997-01-01

A critical review of existing Canadian and international nuclear power plant (NPP) emergency plans, evaluation criteria, and approaches has been conducted to provide AECB staff with information which can be used to assess the adequacy of NPP on-site emergency response plans. The results of this work are published in two volumes. Volume I, Basis Document, provides the reasons why certain requirements are in place. It also gives comprehensive references to various standards.Volume II, Criteria, contains the criteria which relate to on-site actions and their integration with control room activities and the roles of off-site responsible organizations. The recommended criteria provide information on what is required, and not on how to accomplish the requirements. The licensees are given the latitude to decide on the methods and processes needed to meet the requirements. The documents do not address NPP off-site plans and response capability, or the control room emergency operating procedures and response capability. This report contains only Volume II: Criteria. 55 refs., 2 tabs., 1 fig

Enhancing nuclear power plant safety via on-site mental fatigue management

Directory of Open Access Journals (Sweden)

Tsai Ming-Kuan

2017-01-01

Full Text Available Nuclear incidents and accidents have occurred at various nuclear power plants. Since some of these incidents and accidents caused by human errors might be preventable, numerous researchers argue that fatigue management for on-site workers is the key, especially for mental fatigue. Thus, this study proposes an approach consisting of two mechanisms. A fatigue monitor could identify the mentally fatigued workers by detecting their brain wave rhythms through a brain-computer interface. For such workers, a fatigue alert would awaken them. If the status of the mentally fatigued workers becomes worse, based on a positioning technique (i.e., wireless networks, this mechanism would alert the nearby workers and managers to deal with this condition. The test results indicate that the proposed approach enhanced the capacity to examine the mentally fatigued workers, ensured the accuracy in locating these workers, and avoided possible nuclear incidents. This study is a useful reference for similar applications in the nuclear industry.

Facilities and medical care for on-site nuclear power plant radiological emergencies

International Nuclear Information System (INIS)

Anon.

1979-01-01

The operation of a nuclear power plant introduces risks of injury or accidents that could also result in the exposure of personnel to radiation or radioactive materials. It is important in such an event to have adequate first aid and medical facilities, supplies, equipment, transportation capabilities and trained personnel available to provide necessary care. This standard provides guidance for first aid during an emergency and for initial medical care of those overexposed to penetrating radiation or contaminated with radioactive material or radionuclides. Recommendations cover facilities, supplies, equipment and the extent of care on-site, where first aid and initial care may be provided, and off-site at a local hospital, where further medical and surgical care may be provided. Additional recommendations are also provided for the transportation of patients and the training of personnel. A brief discussion of specialized care is provided in an appendix

Effect of stimulation by foliage plant display images on prefrontal cortex activity: a comparison with stimulation using actual foliage plants.

Science.gov (United States)

Igarashi, Miho; Song, Chorong; Ikei, Harumi; Miyazaki, Yoshifumi

2015-01-01

Natural scenes like forests and flowers evoke neurophysiological responses that can suppress anxiety and relieve stress. We examined whether images of natural objects can elicit neural responses similar to those evoked by real objects by comparing the activation of the prefrontal cortex during presentation of real foliage plants with a projected image of the same foliage plants. Oxy-hemoglobin concentrations in the prefrontal cortex were measured using time-resolved near-infrared spectroscopy while the subjects viewed the real plants or a projected image of the same plants. Compared with a projected image of foliage plants, viewing the actual foliage plants significantly increased oxy-hemoglobin concentrations in the prefrontal cortex. However, using the modified semantic differential method, subjective emotional response ratings ("comfortable vs. uncomfortable" and "relaxed vs. awakening") were similar for both stimuli. The frontal cortex responded differently to presentation of actual plants compared with images of these plants even when the subjective emotional response was similar. These results may help explain the physical and mental health benefits of urban, domestic, and workplace foliage. © 2014 The Authors. Journal of Neuroimaging published by the American Society of Neuroimaging.

Onsite transportation hazards assessment

International Nuclear Information System (INIS)

Burnside, M.E.

1998-01-01

This report documents the emergency preparedness Hazards Assessment for the onsite transportation of hazardous material at the Hanford Site. The assessment is required by US Department of Energy (DOE) Order 5500.3A and provides the technical basis for the emergency classification and response procedures. A distinction is made between onsite for the purpose of emergency preparedness and onsite for the purpose of applying US Department of Transportation (DOT) regulations. Onsite for the purpose of emergency preparedness is considered to be within the physical boundary of the entire Hanford Site. Onsite for the purpose of applying DOT regulations is north of the Wye Barricade

On-site quality assurance during erection of a nuclear power plant

International Nuclear Information System (INIS)

Mueller, J.

1976-01-01

The paper deals with general quality assurance measures, the quality assurance during on-site production (incoming inspection, inspection of welds and welding equipment) and describes in more detail the quality assurance procedures for the containment. (RW) [de

Actual state and perspectives of the small hydroelectric plants in Colombia

International Nuclear Information System (INIS)

Torres Q, E.; Castillo C, J.J.

1995-01-01

In this article, the actual state of the small-scale hydroelectric power plants (PCHs, abbreviations in Spanish) in Colombia in aspects as: Statistic of the water in Colombia, a brief historical review and the characteristics of the PCHs in Colombia, is present. The development PCHs, the executing projects and the actions that has been develop by the INEA (Institute of Nuclear Sciences and the Alternative Energies) is described

On-site worker-risk calculations using MACCS

International Nuclear Information System (INIS)

Peterson, V.L.

1993-01-01

We have revised the latest version of MACCS for use with the calculation of doses and health risks to on-site workers for postulated accidents at the Rocky Flats Plant (RFP) in Colorado. The modifications fall into two areas: (1) an improved estimate of shielding offered by buildings to workers that remain indoors; and, (2) an improved treatment of building-wake effects, which affects both indoor and outdoor workers. Because the postulated accident can be anywhere on plant site, user-friendly software has been developed to create those portions of the (revised) MACCS input data files that are specific to the accident site

Planning of occupational dose reduction at BWR power plant by past dose record analysis combined with on-site workers' idea analysis

International Nuclear Information System (INIS)

Konno, T.; Taira, J.; Hayashida, T.; Suzuki, A.; Hayashi, K.; Kato, S.; Ishikawa, T.; Konno, T.; Hayashi, K.

2011-01-01

In order to establish a plan for occupational dose reduction at operating plants, outage inspection works that involve high-dose exposure were selected and a determination of the major causes of high-dose exposure made by plant-by-plant comparison of doses received during inspection works. The comparison was made to investigate the relationship between exposure and the volume of objects to be inspected, working time and man-hour of each work process and ambient dose rates at work areas. In parallel with this, an analysis has also been carried out on 400 data items in a questionnaire survey conducted on relevant individuals, including foremen, radiation safety personnel, on-site workers and plant designers regarding ideas for dose reduction methods. With combination of these two analyses, matters that require improvement will be highlighted, then modification of equipment or revision of work procedures necessary for occupational dose reduction will be planned by plant designers through review. (authors)

2009 Melbourne metropolitan sewerage strategy: a portfolio of decentralised and on-site concept designs.

Science.gov (United States)

Brown, V; Jackson, D W; Khalifé, M

2010-01-01

The bulk and retail water companies of the greater Melbourne area are developing the 2009 Metropolitan Sewerage Strategy to provide sustainable sewerage services to 2060. The objective of the strategy is to establish long term principles and near term actions to produce a robust sewage management system for Melbourne. Melbourne's existing sewerage system is largely centralised and discharges to two major treatment plants. Several small satellite treatment plants service local urban areas generally more distant from the centralised system. Decentralised and on-site wastewater systems are options for future sewage management and could play a role in local recycling. A portfolio of 18 on-site and decentralised concept designs was developed, applicable to the full range of urban development types in Melbourne. The concepts can be used in evaluation of metropolitan system configurations as part of future integrated water cycle planning. The options included secondary and tertiary treatment systems incorporating re-use of water for non potable uses, urine separation, black and greywater separation and composting toilets. On-site and cluster treatment systems were analysed. Each option is described by its indicative capital and operating costs, energy use and water and nutrient balances. This paper summarises and compares the portfolio mix of decentralized and on-site options in Melbourne's context.

Development of an on-site measurement method for residual stress in primary system piping of nuclear power plants

International Nuclear Information System (INIS)

Maekawa, Akira; Takahashi, Shigeru; Fujiwara, Masaharu

2014-01-01

In residual stress measurement for large-scale pipes and vessels in high radiation areas and highly contaminated areas of nuclear plants, it is difficult to bring the radioactivated pipes and vessels out of the areas as they are. If they can brought out, it is very burdensome to handle them for the measurement. Development of an on-site measurement method of residual stress which can be quickly applied and has sufficient measurement accuracy is desirable. In this study, a new method combining an electric discharge skim-cut method with a microscopic strain measurement method using markers was proposed to realize the on-site residual stress measurement on pipes in high radiation areas and highly contaminated areas. In the electric discharge skim-cut method, a boat-type sample is skimmed out of a pipe outer/inner surface using electric discharge machining and released residual stress is measured. The on-site measurement of residual stress by the method can be done using a small, portable electric discharge machine. In the microscopic strain measurement method using markers, the residual stress is estimated by microscopic measurement of the distance between markers after the stress release. The combination of both methods can evaluate the residual stress with the same accuracy as conventional methods offer and it can achieve reduction of radiation exposure in the measurement because the work is done simply and rapidly. In this study, the applicability of the electric discharge skim-cut method was investigated because the applicability of the microscopic strain measurement method using markers was confirmed previously. The experimental examination clarified the applicable conditions for the residual stress measurement with the same accuracy as the conventional methods. Furthermore, the electric discharge machining conditions using pure water as the machining liquid was found to eliminate the amount of liquid radioactive waste completely. (author)

Methane Production of Full-Scale Anaerobic Digestion Plants Calculated from Substrate’s Biomethane Potentials Compares Well with the One Measured On-Site

Energy Technology Data Exchange (ETDEWEB)

Holliger, Christof, E-mail: christof.holliger@epfl.ch [Laboratory for Environmental Biotechnology, School for Architecture, Civil and Environmental Engineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne (Switzerland); Fruteau de Laclos, Hélène [Methaconsult, Préverenges (Switzerland); Hack, Gabrielle [Laboratory for Environmental Biotechnology, School for Architecture, Civil and Environmental Engineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne (Switzerland)

2017-06-09

Biomethane potential (BMP) tests are used to determine the amount of methane that can be produced from organic materials in order to design different components of full-scale anaerobic digestion (AD) plants such as size of the digesters and units exploiting the produced biogas. However, little is known on how well BMPs compare with biogas production from the same organic materials in full-scale installations. In this study, two AD plants were chosen to carry out such comparisons, a dry AD plant treating green waste from urban areas and food waste from restaurants and supermarkets, and a liquid AD plant treating waste sludge from wastewater treatment and seven additional organic wastes. The BMPs of multiple samples of the individual organic materials collected during a period of 7–9 months were determined. Separate tests of mixtures of organic materials confirmed that the BMP of the mixtures can be calculated by adding the BMPs of the individual materials. The weekly methane production during the investigated periods was calculated from the full-scale installation data on the feeding of the digesters and the BMPs of each substrate fed into the digesters and compared with the weekly methane production measured on-site. The latter was calculated from the most accurately measured entity, either the electricity or the volume of purified biomethane injected into the grid. The weekly methane production rates calculated from BMPs and the one measured on-site were very similar and followed the same pattern. Some exceptions could be explained by, e.g., an overload of the full-scale installation. The measured weekly methane production accounted for 94.0 ± 6.8 and 89.3 ± 5.7% of the calculated weekly methane production for the wet and dry AD plant, respectively. For 26 out of 29 weeks, the calculated weekly methane production overestimated the measured one in the case of the wet AD plant and for 37 out of 39 weeks for the dry AD plant. Based on these results, it is

Methane Production of Full-Scale Anaerobic Digestion Plants Calculated from Substrate’s Biomethane Potentials Compares Well with the One Measured On-Site

International Nuclear Information System (INIS)

Holliger, Christof; Fruteau de Laclos, Hélène; Hack, Gabrielle

2017-01-01

Biomethane potential (BMP) tests are used to determine the amount of methane that can be produced from organic materials in order to design different components of full-scale anaerobic digestion (AD) plants such as size of the digesters and units exploiting the produced biogas. However, little is known on how well BMPs compare with biogas production from the same organic materials in full-scale installations. In this study, two AD plants were chosen to carry out such comparisons, a dry AD plant treating green waste from urban areas and food waste from restaurants and supermarkets, and a liquid AD plant treating waste sludge from wastewater treatment and seven additional organic wastes. The BMPs of multiple samples of the individual organic materials collected during a period of 7–9 months were determined. Separate tests of mixtures of organic materials confirmed that the BMP of the mixtures can be calculated by adding the BMPs of the individual materials. The weekly methane production during the investigated periods was calculated from the full-scale installation data on the feeding of the digesters and the BMPs of each substrate fed into the digesters and compared with the weekly methane production measured on-site. The latter was calculated from the most accurately measured entity, either the electricity or the volume of purified biomethane injected into the grid. The weekly methane production rates calculated from BMPs and the one measured on-site were very similar and followed the same pattern. Some exceptions could be explained by, e.g., an overload of the full-scale installation. The measured weekly methane production accounted for 94.0 ± 6.8 and 89.3 ± 5.7% of the calculated weekly methane production for the wet and dry AD plant, respectively. For 26 out of 29 weeks, the calculated weekly methane production overestimated the measured one in the case of the wet AD plant and for 37 out of 39 weeks for the dry AD plant. Based on these results, it is

Actual versus predicted impacts of three ethanol plants on aquatic and terrestrial resources

International Nuclear Information System (INIS)

Eddlemon, G.K.; Webb, J.W.; Hunsaker, D.B. Jr.; Miller, R.L.

1993-01-01

To help reduce US dependence on imported petroleum, Congress passed the Energy Security Act of 1980 (public Law 96-294). This legislation authorized the US Department of Energy (DOE) to promote expansion of the fuel alcohol industry through, among other measures, its Alcohol Fuels Loan Guarantee Program. Under this program, selected proposals for the conversion of plant biomass into fuel-grade ethanol would be granted loan guarantees. of 57 applications submitted for loan guarantees to build and operate ethanol fuel projects under this program, 11 were considered by DOE to have the greatest potential for satisfying DOE's requirements and goals. In accordance with the National Environmental Policy Act (NEPA), DOE evaluated the potential impacts of proceeding with the Loan Guarantee Program in a programmatic environmental assessment (DOE 1981) that resulted in a finding of no significant impact (FANCY) (47 Federal Register 34, p. 7483). The following year, DOE conducted site-specific environmental assessments (EAs) for 10 of the proposed projects. These F-As predicted no significant environmental impacts from these projects. Eventually, three ethanol fuel projects received loan guarantees and were actually built: the Tennol Energy Company (Tennol; DOE 1982a) facility near Jasper in southeastern Tennessee; the Agrifuels Refining Corporation (Agrifuels; DOE 1985) facility near New Liberia in southern Louisiana; and the New Energy Company of Indiana (NECI; DOE 1982b) facility in South Bend, Indiana. As part of a larger retrospective examination of a wide range of environmental effects of ethanol fuel plants, we compared the actual effects of the three completed plants on aquatic and terrestrial resources with the effects predicted in the NEPA EAs several years earlier. A secondary purpose was to determine: Why were there differences, if any, between actual effects and predictions? How can assessments be improved and impacts reduced?

Microbial Community Profiles in Wastewaters from Onsite Wastewater Treatment Systems Technology.

Directory of Open Access Journals (Sweden)

Łukasz Jałowiecki

Full Text Available The aim of the study was to determine the potential of community-level physiological profiles (CLPPs methodology as an assay for characterization of the metabolic diversity of wastewater samples and to link the metabolic diversity patterns to efficiency of select onsite biological wastewater facilities. Metabolic fingerprints obtained from the selected samples were used to understand functional diversity implied by the carbon substrate shifts. Three different biological facilities of onsite wastewater treatment were evaluated: fixed bed reactor (technology A, trickling filter/biofilter system (technology B, and aerated filter system (the fluidized bed reactor, technology C. High similarities of the microbial community functional structures were found among the samples from the three onsite wastewater treatment plants (WWTPs, as shown by the diversity indices. Principal components analysis (PCA showed that the diversity and CLPPs of microbial communities depended on the working efficiency of the wastewater treatment technologies. This study provided an overall picture of microbial community functional structures of investigated samples in WWTPs and discerned the linkages between microbial communities and technologies of onsite WWTPs used. The results obtained confirmed that metabolic profiles could be used to monitor treatment processes as valuable biological indicators of onsite wastewater treatment technologies efficiency. This is the first step toward understanding relations of technology types with microbial community patterns in raw and treated wastewaters.

On-Site Molecular Detection of Soil-Borne Phytopathogens Using a Portable Real-Time PCR System.

Science.gov (United States)

DeShields, Joseph B; Bomberger, Rachel A; Woodhall, James W; Wheeler, David L; Moroz, Natalia; Johnson, Dennis A; Tanaka, Kiwamu

2018-02-23

On-site diagnosis of plant diseases can be a useful tool for growers for timely decisions enabling the earlier implementation of disease management strategies that reduce the impact of the disease. Presently in many diagnostic laboratories, the polymerase chain reaction (PCR), particularly real-time PCR, is considered the most sensitive and accurate method for plant pathogen detection. However, laboratory-based PCRs typically require expensive laboratory equipment and skilled personnel. In this study, soil-borne pathogens of potato are used to demonstrate the potential for on-site molecular detection. This was achieved using a rapid and simple protocol comprising of magnetic bead-based nucleic acid extraction, portable real-time PCR (fluorogenic probe-based assay). The portable real-time PCR approach compared favorably with a laboratory-based system, detecting as few as 100 copies of DNA from Spongospora subterranea. The portable real-time PCR method developed here can serve as an alternative to laboratory-based approaches and a useful on-site tool for pathogen diagnosis.

Plant life extension program for Indian PHWR power plants - Actual experience and future plans

International Nuclear Information System (INIS)

Sharma, M.B.; Ghoshal, B.; Shirolkar, K.M.; Ahmad, S.N.

2002-01-01

emergency core cooling system, inspection and replacement of heat exchangers and steam generators, and enhancement of emergency power supplies. It needs to be recognised that RAPS was built in the 1970s. Thus considerable upgrades have been done to meet latest safety requirements. Hence jobs like segregation of safety related power supplies and cables to meet more stringently groups and channel philosophy, installation of fire barriers and modernisation of fire detection system have also been carried out. The paper discusses the tools developed including remote tooling, mock-ups done and special training given to ensure that the work is done safely in the shortest possible time and with the lowest man-rem consumption. For RAPS-2 results are compared with the original planned values and it will be noticed that considerable savings were achieved in man-rem, monetary expenditure and time taken for the job. One significant aspect of the coolant channel replacement and upgradation work has been that all the work was done within the department of atomic energy. This included theoretical work, experimental studies, actual execution of the jobs and inspection and testing. The role of industry has been limited to supply of equipment. For MAPS outside agencies have been invited to participate in actual execution of the jobs at site. This has considerably changed the method of planning and execution of the jobs. For future reactors greater role of industry in development and actual site work is envisaged. The paper discusses the options being considered by NPCIL. Plant life extension and upgradation of older plants throws up several issues related to safety regulatory criteria that the upgraded plant should meet. This paper discusses the methodology formed by the utility and regulatory authority to meet agreed criteria for safety. Also discussed are special areas of concern like configuration control, documentation, training and re-qualification of operations staff. This paper

On-site detection of Xylella fastidiosa in host plants and in “spy insects” using the real-time loop-mediated isothermal amplification method

Directory of Open Access Journals (Sweden)

Thaer YASEEN

2015-12-01

Full Text Available A recent severe outbreak of Xylella fastidiosa associated with ‘olive quick decline syndrome’ (OQDS was reported in Apulia (Southern Italy. In this study an on-site real-time loop-mediated isothermal amplification (real-time LAMP was developed for detecting X. fastidiosa in host plants and insects. A marked simplification of the DNA extraction procedure was obtained by heating the samples in a portable Smart-Dart device and using an optimized enhancer reaction buffer. The connection to a tablet or Smartphone allowed to visualize the results of the reaction in real time. Compared to PCR and ELISA, with which it showed comparable results in terms of sensitivity and reliability in the X. fastidiosa detection, this simplified real-time LAMP procedure proved to be “user friendly”, displaying the advantages to be an on-site detection method of easy handling, rapid execution and low cost.

YAG laser cladding to heat exchanger flange in actual plant

International Nuclear Information System (INIS)

Toshio, Kojima

2001-01-01

This paper is a sequel to ''Development of YAG Laser Cladding Technology to Heat Exchanger Flange'' presented in ICONE-8. A YAG Laser cladding technology is a permanent repairing and preventive maintenance method for heat exchanger's flange (channel side) seating surface which is degraded by the corrosion in long term operation. The material of this flange is carbon steel, and that of cladding wire is type 316 stainless steel so as to have high corrosion resistance. In former paper above, the soundness of cladding layers were presented to be verified. This channel side flange is bolted with tube sheet (shell side) through metal gasket. As the tube sheet side is already cladded a corrosion resistant material, it needs to apply the repairing and preventive maintenance method to only channel side. In 2000 this technology had been performed to the actual heat exchanger (Residual Heat Removal Heat Exchanger; RHR Hx) flange in domestic nuclear power plant. This paper described the outline, special equipment, and our total evaluation for this actual laser cladding work. And also several technical subjects which we should solve and/or improve for the next project was presented. (author)

On-Site Enzyme Production by Trichoderma asperellum for the Degradation of Duckweed

DEFF Research Database (Denmark)

Bech, Lasse; Herbst, Florian-Alexander; Grell, Morten Nedergaard

2015-01-01

The on-site production of cell wall degrading enzymes is an important strategy for the development of sustainable bio-refinery processes. This study concerns the optimization of production of plant cell wall-degrading enzymes produced by Trichoderma asperellum. A comparative secretome analysis...

42 CFR 424.517 - Onsite review.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Onsite review. 424.517 Section 424.517 Public... Billing Privileges § 424.517 Onsite review. (a) CMS reserves the right, when deemed necessary, to perform onsite review of a provider or supplier to verify that the enrollment information submitted to CMS or its...

78 FR 32462 - Wyatt Virgin Islands (V.I.), Inc., a Division of Wyatt Field Service Company, Working On-Site at...

Science.gov (United States)

2013-05-30

... the subject worker group was established to exclusively work at the HOVENSA refinery plant in the U.S....), Inc., a Division of Wyatt Field Service Company, Working On-Site at Hovensa, LLC Oil Refinery... (V.I.), Inc., a division of Wyatt Field Service Company, working on-site at HOVENSA, LLC Oil Refinery...

75 FR 66795 - TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site...

Science.gov (United States)

2010-10-29

... follows: ``All workers TTM Technologies, including on-site leased workers from Kelly Services and Aerotek... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-64,993] TTM Technologies, Including On-Site Leased Workers From Kelly Services, Aerotek, and an On-Site Leased Worker From Orbotech...

Method for Prediction of the Power Output from Photovoltaic Power Plant under Actual Operating Conditions

Science.gov (United States)

Obukhov, S. G.; Plotnikov, I. A.; Surzhikova, O. A.; Savkin, K. D.

2017-04-01

Solar photovoltaic technology is one of the most rapidly growing renewable sources of electricity that has practical application in various fields of human activity due to its high availability, huge potential and environmental compatibility. The original simulation model of the photovoltaic power plant has been developed to simulate and investigate the plant operating modes under actual operating conditions. The proposed model considers the impact of the external climatic factors on the solar panel energy characteristics that improves accuracy in the power output prediction. The data obtained through the photovoltaic power plant operation simulation enable a well-reasoned choice of the required capacity for storage devices and determination of the rational algorithms to control the energy complex.

Onsite storage facility for low level radwaste

International Nuclear Information System (INIS)

Maxwell, M.G.

1984-01-01

The Tennessee Valley Authority (TVA) has designed and constructed an onsite storage facility for low level radwaste (LLRW) at its Browns Ferry Nuclear Plant in northern Alabama. The paper addresses the function of this facility and provides a complete description of the reinforced concrete storage modules which are the principal structural elements of the facility. The loads and loading combinations for the design of the storage modules are defined to include the foundation design parameters. Other aspects of the modules that are addressed are; the structural roof elements that provide access to the modules, shielding requirements for the LLRW, and tornado missile considerations

Analysis of licensee event reports related to nuclear generating station onsite electrical system malfunctions, 1976-1978

International Nuclear Information System (INIS)

Bickel, J.H.; Abbott, E.C.

1981-07-01

This report summarizes the evaluation requested by the ACRS of 1177 LERS, submitted over a three year period, which related to onsite electrical system malfunctions. The evaluation was carried out for the purposes of identifying specific failure modes and consequences, evaluating the assumptions used in WASH-1400 on the reliability of electrical equipment, and identifying specific sequences which are significant to plant safety. The analysis performed provides a more specific identification of onsite electrical system failure modes, sequences, and consequences than was established in WASH-1400

Intruder dose pathway analysis for the onsite disposal of radioactive wastes: The ONSITE/MAXI1 computer program

International Nuclear Information System (INIS)

Kennedy, W.E. Jr.; Peloquin, R.A.; Napier, B.A.; Neuder, S.M.

1987-02-01

This document summarizes initial efforts to develop human-intrusion scenarios and a modified version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. Supplement 1 of NUREG/CR-3620 (1986) summarized modifications and improvements to the ONSITE/MAXI1 software package. This document summarizes a modified version of the ONSITE/MAXI1 computer program. This modified version of the computer program operates on a personal computer and permits the user to optionally select radiation dose conversion factors published by the International Commission on Radiological Protection (ICRP) in their Publication No. 30 (ICRP 1979-1982) in place of those published by the ICRP in their Publication No. 2 (ICRP 1959) (as implemented in the previous versions of the ONSITE/MAXI1 computer program). The pathway-to-human models used in the computer program have not been changed from those described previously. Computer listings of the ONSITE/MAXI1 computer program and supporting data bases are included in the appendices of this document

On-site and off-site activities

International Nuclear Information System (INIS)

Martin, H.D.

1986-01-01

Design principles for NPP training programs. Effects of NPP contracts. Effects of domestic industrial activities. The role of international bodies. Requirements for on-site training. Training abroad, technical, financial and social aspects. Training center on-site, an evaluation. (orig.)

An accurate system for onsite calibration of electronic transformers with digital output

International Nuclear Information System (INIS)

Zhi Zhang; Li Hongbin

2012-01-01

Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

An accurate system for onsite calibration of electronic transformers with digital output.

Science.gov (United States)

Zhi, Zhang; Li, Hong-Bin

2012-06-01

Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

An accurate system for onsite calibration of electronic transformers with digital output

Energy Technology Data Exchange (ETDEWEB)

Zhi Zhang; Li Hongbin [CEEE of HuaZhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Wuhan 430074 (China)

2012-06-15

Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

An accurate system for onsite calibration of electronic transformers with digital output

Science.gov (United States)

Zhi, Zhang; Li, Hong-Bin

2012-06-01

Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

Nuclear power plant monitoring method by neural network and its application to actual nuclear reactor

International Nuclear Information System (INIS)

Nabeshima, Kunihiko; Suzuki, Katsuo; Shinohara, Yoshikuni; Tuerkcan, E.

1995-11-01

In this paper, the anomaly detection method for nuclear power plant monitoring and its program are described by using a neural network approach, which is based on the deviation between measured signals and output signals of neural network model. The neural network used in this study has three layered auto-associative network with 12 input/output, and backpropagation algorithm is adopted for learning. Furthermore, to obtain better dynamical model of the reactor plant, a new learning technique was developed in which the learning process of the present neural network is divided into initial and adaptive learning modes. The test results at the actual nuclear reactor shows that the neural network plant monitoring system is successfull in detecting in real-time the symptom of small anomaly over a wide power range including reactor start-up, shut-down and stationary operation. (author)

Application of rapid onsite PCR (TaqMan) for Phytophthora ramorum under U.S. conditions

Science.gov (United States)

Kelvin Hughes; Jenny Tomlinson; Neil Boonham; Kelly Ivors; Matteo Garbelotto; Ian Barker

2006-01-01

Currently, diagnosis of Phytophthora ramorum involves sending samples to a laboratory for traditional isolation and morphological characterisation, and/or PCR analysis. This can take as long as 2 weeks from sampling to final diagnosis. However, the Plant Health Group, Central Science Laboratory, has produced on-site DNA extraction and real-time PCR (...

Intruder dose pathway analysis for the onsite disposal of radioactive wastes: the ONSITE/MAXI1 computer program

International Nuclear Information System (INIS)

Napier, B.A.; Peloquin, R.A.; Kennedy, W.E. Jr.; Neuder, S.M.

1984-10-01

Because of uncertainties associated with assessing the potential risks from onsite burials of radioactive waste, the US Nuclear Regulatory Commission (NRC) has amended its regulations to provide greater assurance that buried radioactive material will not present a hazard to public health and safety. The amended regulations now require licensees to apply for approval of proposed procedures for onsite disposal pursuant to 10 CFR 20.302. The NRC technically reviews these requests on a case-by-case basis. These technical reviews require modeling potential pathways to man and projecting radiation dose commitments. This document contains a summary of our efforts to develop human-intrusion scenarios and to modify a version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. The documentation of the ONSITE/MAXI computer program is written for two audiences. The first (Audience A) includes persons concerned with the mathematical models and computer algorithms. The second (Audience B) includes persons concerned with exercising the computer program and scenarios for specific onsite disposal applications. Five sample problems are presented and discussed to assist the user in operating the computer program. Summaries of the input and output for the sample problems are included along with a discussion of the hand calculations performed to verify the correct operation of the computer program. Computer listings of the ONSITE/MAXI1 computer program with an abbreviated data base listing are included as Appendix 1 to this document. Finally, complete listings of the data base with listings of the special codes used to create the data base are included in Appendix 2 as a microfiche attachment to this document

A method for the rapid on-site assessment of handleability

Energy Technology Data Exchange (ETDEWEB)

Brown, D.W.; Atkin, B.P. [University of Nottingham, Nottingham (United Kingdom). School of Chemical, Environmental and Mining Engineering

2000-07-01

The handleability monitor has been specifically designed to provide a simple, rapid and on-site assessment of the whole or part consignment of a coal blend in its 'as-prepared' or 'as-received' condition. Evaluation has been carried out at a number of user's coal-handling plants, on both metallurgical and power station coals from a variety of sources world-wide (Australia, South Africa, United Kingdom and USA). The results are used to predict which coals could routinely pass through handling plant at line capacity, without causing blockage or decay, and have also been correlated with the operator's perception of the coal's handling characteristics and problems caused (blockages in chutes, hoppers, etc.) on the coal handling plant. Monitors were located at a coal fired power station and at a coal handling plant at an iron and steel works. 16 refs., 9 figs.

VT Data - Onsite Sewage Disposal Soil Ratings

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) ONSITE is a pre-selected subset of SSURGO certified soil data depicting onsite sewage disposal ratings of Vermont soils. The NRCS Top20 table was...

On-site disposal as a decommissioning strategy

International Nuclear Information System (INIS)

1999-11-01

On-site disposal is not a novel decommissioning strategy in the history of the nuclear industry. Several projects based on this strategy have been implemented. Moreover, a number of studies and proposals have explored variations within the strategy, ranging from in situ disposal of entire facilities or portions thereof to disposal within the site boundary of major components such as the reactor pressure vessel or steam generators. Regardless of these initiatives, and despite a significant potential for dose, radioactive waste and cost reduction, on-site disposal has often been disregarded as a viable decommissioning strategy, generally as the result of environmental and other public concerns. Little attention has been given to on-site disposal in previous IAEA publications in the field of decommissioning. The objective of this report is to establish an awareness of technical factors that may or may not favour the adoption of on-site disposal as a decommissioning strategy. In addition, this report presents an overview of relevant national experiences, studies and proposals. The expected end result is to show that, subject to safety and environmental protection assessment, on-site disposal can be a viable decommissioning option and should be taken into consideration in decision making

Design characteristics of EU-APR1400 on-site power system

International Nuclear Information System (INIS)

Kim, D.H.; Kim, Y.S.; Kim, Y.S.

2014-01-01

In the global nuclear market, US and European design requirements have been largely used to develop the design of nuclear power plants(NPPs). The APR1400 design was developed on the basis of US regulatory guide and EPRI utility requirements document(URD). In order to enlarge the export market of APR1400, KHNP (Korea Hydro & Nuclear Power Co., Ltd) has developed the EU-APR1400 design which complies with the European nuclear design requirements. In this paper, the design characteristics of EU-APR1400 on-site power system developed according to the European design requirements of electrical power system are described. The European main design requirements of electrical power system involve 50 Hz rated frequency, 400/110 kV grid voltage, the application of the diversity and the redundancy, and so on. The EU-APR1400 on-site power system has been developed on the basis of these requirements. The representative designs include the redundancy, diversity, independence design, the emergency power supply design, the design for providing electrical power to the dedicated severe accident systems, and the design for European grid requirements. (author)

7 CFR 205.403 - On-site inspections.

Science.gov (United States)

2010-01-01

..., Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT PROVISIONS NATIONAL ORGANIC PROGRAM Certification § 205.403 On-site inspections. (a) On-site inspections. (1... site that produces or handles organic products and that is included in an operation for which...

Application of micro-solid-phase extraction for the on-site extraction of heterocyclic aromatic amines in seawater.

Science.gov (United States)

Basheer, Chanbasha

2018-04-01

An efficient on-site extraction technique to determine carcinogenic heterocyclic aromatic amines in seawater has been reported. A micro-solid-phase extraction device placed inside a portable battery-operated pump was used for the on-site extraction of seawater samples. Before on-site applications, parameters that influence the extraction efficiency (extraction time, type of sorbent materials, suitable desorption solvent, desorption time, and sample volume) were investigated and optimized in the laboratory. The developed method was then used for the on-site sampling of heterocyclic aromatic amines determination in seawater samples close to distillation plant. Once the on-site extraction completed, the small extraction device with the analytes was brought back to the laboratory for analysis using high-performance liquid chromatography with fluorescence detection. Based on the optimized conditions, the calibration curves were linear over the concentration range of 0.05-20 μg/L with correlation coefficients up to 0.996. The limits of detection were 0.004-0.026 μg/L, and the reproducibility values were between 1.3 and 7.5%. To evaluate the extraction efficiency, a comparison was made with conventional solid-phase extraction and it was applied to various fortified real seawater samples. The average relative recoveries obtained from the spiked seawater samples varied in the range 79.9-95.2%. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reliability of emergency ac power systems at nuclear power plants

International Nuclear Information System (INIS)

Battle, R.E.; Campbell, D.J.

1983-07-01

Reliability of emergency onsite ac power systems at nuclear power plants has been questioned within the Nuclear Regulatory Commission (NRC) because of the number of diesel generator failures reported by nuclear plant licensees and the reactor core damage that could result from diesel failure during an emergency. This report contains the results of a reliability analysis of the onsite ac power system, and it uses the results of a separate analysis of offsite power systems to calculate the expected frequency of station blackout. Included is a design and operating experience review. Eighteen plants representative of typical onsite ac power systems and ten generic designs were selected to be modeled by fault trees. Operating experience data were collected from the NRC files and from nuclear plant licensee responses to a questionnaire sent out for this project

Risk management of onsite transportation of hazardous materials

International Nuclear Information System (INIS)

Wang, O.S.; Field, J.G.

1992-10-01

The US Department of Energy's (DOE) Hanford Site has recently undergone a significant change in its mission. The focus of site-wide operations has been shifted from production to environmental restoration. As a result, there is a significant increase in quantities of the radioactive wastes and other hazardous materials to be packaged and transported onsite. In response to the elevated transportation activities, the operations and engineering contractor for the Hanford Site, Westinghouse Hanford Company (Westinghouse Hanford), is proposing an integrated risk assessment methodology and risk management strategy to further enhance the safe operations of the onsite packaging and transportation activities involving radioactive and other hazardous materials. This paper summarizes Westinghouse Hanford's proposed risk assessment and risk management methodology for onsite transportation of hazardous materials. The proposed Westinghouse Hanford risk assessment and management methodology for onsite packaging and transportation has three integral parts: risk assessment, risk acceptance criteria, and risk minimization process. The purposes are to ensure that the risk for each ongoing transportation activity is acceptable, and to further reduce the overall risk for current and future onsite transportation activities

Operating experience and licensing criteria relating to on-site electric power systems in Italy

International Nuclear Information System (INIS)

Ciattaglia, S.; Grimaldi, G.

1986-01-01

The most significant events of on-site electrical power supply degradation in Italian plants took place in coincidence with severe atmospheric conditions or with the propagation of disturbances by lightning stroke inside the plant. Essential instrumentation was lost in two cases so that, for some time, no indication of the plant status was allowed. In both cases the recovery of the plant was achieved by restoration of external power supply. Corrective actions included both improvement in immunity to disturbances, redundancy, capability and physical separation and DG's reliability demonstration. Design and safety analysis of new plants are now carried out with the help of reliability studies and probabilistic risk assessment. As a result, design changes were performed on new plants to improve the reliability of DGs start-up and the independence of the electrical emergency divisions. (authors)

Operating experience and licensing criteria relating to on-site electric power systems in Italy

Energy Technology Data Exchange (ETDEWEB)

Ciattaglia, S.; Grimaldi, G. [ENEA/DISP, Via Vitaliano Brancati, 48, 00144 Roma/Rome (Italy)

1986-02-15

The most significant events of on-site electrical power supply degradation in Italian plants took place in coincidence with severe atmospheric conditions or with the propagation of disturbances by lightning stroke inside the plant. Essential instrumentation was lost in two cases so that, for some time, no indication of the plant status was allowed. In both cases the recovery of the plant was achieved by restoration of external power supply. Corrective actions included both improvement in immunity to disturbances, redundancy, capability and physical separation and DG's reliability demonstration. Design and safety analysis of new plants are now carried out with the help of reliability studies and probabilistic risk assessment. As a result, design changes were performed on new plants to improve the reliability of DGs start-up and the independence of the electrical emergency divisions. (authors)

Intruder dose pathway analysis for the onsite disposal of radioactive wastes: the ONSITE/MAXI1 computer program. Supplement No. 1

International Nuclear Information System (INIS)

Kennedy, W.E. Jr.; Peloquin, R.A.; Napier, B.A.; Neuder, S.M.

1986-05-01

The document entitled Intruder Dose Pathway Analysis of the Onsite Disposal of Radioactive Wastes: The ONSITE/MAXI1 Computer Program (1984) summarizes initial efforts to develop human-intrustion scenarios and a modified version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. This document is a supplement to that document and summarizes efforts to further modify and improve the ONSITE/MAXI1 software package. To facilitate cross-referencing, it follows the same format. Notable improvements to the software package include the capability to account for shielding conditions that represent noncompacted trash wastes and the option to indicate alternative land-use condition;s. This supplement contains a description of the implementation of these modifications. In addition, a series of discussions are included in an attempt to increase the user's understanding of the scenarios and dose calculation methods. These discussions respond to frequently asked questions about the mathematical models and use of the software. Computer listings of the ONSITE/MAXI1 computer program are included as Appendices A and B of this document. Appendix C lists external exposure dose-rate factor libraries

Impact of onsite solar generation on system load demand forecast

International Nuclear Information System (INIS)

Kaur, Amanpreet; Pedro, Hugo T.C.; Coimbra, Carlos F.M.

2013-01-01

Highlights: • We showed the impact onsite solar generation on system demand load forecast. • Forecast performance degrades by 9% and 3% for 1 h and 15 min forecast horizons. • Error distribution for onsite case is best characterized as t-distribution. • Relation between error, solar penetration and solar variability is characterized. - Abstract: Net energy metering tariffs have encouraged the growth of solar PV in the distribution grid. The additional variability associated with weather-dependent renewable energy creates new challenges for power system operators that must maintain and operate ancillary services to balance the grid. To deal with these issues power operators mostly rely on demand load forecasts. Electric load forecast has been used in power industry for a long time and there are several well established load forecasting models. But the performance of these models for future scenario of high renewable energy penetration is unclear. In this work, the impact of onsite solar power generation on the demand load forecast is analyzed for a community that meets between 10% and 15% of its annual power demand and 3–54% of its daily power demand from a solar power plant. Short-Term Load Forecasts (STLF) using persistence, machine learning and regression-based forecasting models are presented for two cases: (1) high solar penetration and (2) no penetration. Results show that for 1-h and 15-min forecasts the accuracy of the models drops by 9% and 3% with high solar penetration. Statistical analysis of the forecast errors demonstrate that the error distribution is best characterized as a t-distribution for the high penetration scenario. Analysis of the error distribution as a function of daily solar penetration for different levels of variability revealed that the solar power variability drives the forecast error magnitude whereas increasing penetration level has a much smaller contribution. This work concludes that the demand forecast error distribution

Wind plant capacity credit variations: A comparison of results using multiyear actual and simulated wind-speed data

Energy Technology Data Exchange (ETDEWEB)

Milligan, M.R. [National Renewable Energy Lab., Golden, CO (United States)

1997-12-31

Although it is widely recognized that variations in annual wind energy capture can be significant, it is not clear how significant this effect is on accurately calculating the capacity credit of a wind plant. An important question is raised concerning whether one year of wind data is representative of long-term patterns. This paper calculates the range of capacity credit measures based on 13 years of actual wind-speed data. The results are compared to those obtained with synthetic data sets that are based on one year of data. Although the use of synthetic data sets is a considerable improvement over single-estimate techniques, this paper finds that the actual inter-annual variation in capacity credit is still understated by the synthetic data technique.

Recommended criteria for the evaluation of on-site nuclear power plant emergency exercises

International Nuclear Information System (INIS)

Lafortune, J.F.

1997-01-01

A review of existing Canadian and International emergency exercise evaluation criteria and approaches has been conducted. Based on the results of the review, criteria are proposed for the evaluation of on-site emergency exercises for Canadian nuclear power stations. The proposed criteria are performance-based. They are comprehensive, yet remain adaptable to all stations and accident scenarios. They are primarily aimed at radiological emergency exercises, but are entirely applicable to fire or other conventional exercises. This report also addresses evaluation preparation and methodology. (author). 21 refs., 6 tabs

Organic contaminants in onsite wastewater treatment systems

Science.gov (United States)

Conn, K.E.; Siegrist, R.L.; Barber, L.B.; Brown, G.K.

2007-01-01

Wastewater from thirty onsite wastewater treatment systems was sampled during a reconnaissance field study to quantify bulk parameters and the occurrence of organic wastewater contaminants including endocrine disrupting compounds in treatment systems representing a variety of wastewater sources and treatment processes and their receiving environments. Bulk parameters ranged in concentrations representative of the wide variety of wastewater sources (residential vs. non-residential). Organic contaminants such as sterols, surfactant metabolites, antimicrobial agents, stimulants, metal-chelating agents, and other consumer product chemicals, measured by gas chromatography/mass spectrometry were detected frequently in onsite system wastewater. Wastewater composition was unique between source type likely due to differences in source water and chemical usage. Removal efficiencies varied by engineered treatment type and physicochemical properties of the contaminant, resulting in discharge to the soil treatment unit at ecotoxicologically-relevant concentrations. Organic wastewater contaminants were detected less frequently and at lower concentrations in onsite system receiving environments. Understanding the occurrence and fate of organic wastewater contaminants in onsite wastewater treatment systems will aid in minimizing risk to ecological and human health.

T Plant Overpack Tiedown Analysis

International Nuclear Information System (INIS)

RILEY, D.L.

2000-01-01

This tiedown evaluation meets the requirement imposed by HNF-6550, ''Safety Evaluation for Packaging (Onsite) T Plant Canyon Items,'' (O'Brien 2000). O'Brien (2000) requires that any items prepared for shipment from T Plant to the burial grounds

Managing the risks of on-site health centers.

Science.gov (United States)

Gorman, Kathleen M; Miller, Ross M

2011-11-01

This review sought to assess compliance concerns, determine risk management strategies, and identify opportunities for future research to contribute to employers' understanding of the laws and regulations that apply to on-site care. A comprehensive review of databases, professional organizations' websites, and journals resulted in 22 publications reporting on the consequences of noncompliance among on-site health centers accepted for inclusion. None of those studies reported a study design or quantifiable outcome data. Two noncompliance themes were repeated among the publications. First, direct penalties included fines, civil actions, loss of licensure, and, potentially, criminal charges. Second, noncompliance also resulted in indirect costs such as employee mistrust and lowered standards of care, which jeopardize on-site health centers' ability to demonstrate a return on investment. Further research with rigorous methodology is needed to inform employer decisions about on-site health services and associated risk management. Copyright 2011, SLACK Incorporated.

On-Site Detection as a Countermeasure to Chemical Warfare/Terrorism.

Science.gov (United States)

Seto, Y

2014-01-01

On-site monitoring and detection are necessary in the crisis and consequence management of wars and terrorism involving chemical warfare agents (CWAs) such as sarin. The analytical performance required for on-site detection is mainly determined by the fatal vapor concentration and volatility of the CWAs involved. The analytical performance for presently available on-site technologies and commercially available on-site equipment for detecting CWAs interpreted and compared in this review include: classical manual methods, photometric methods, ion mobile spectrometry, vibrational spectrometry, gas chromatography, mass spectrometry, sensors, and other methods. Some of the data evaluated were obtained from our experiments using authentic CWAs. We concluded that (a) no technologies perfectly fulfill all of the on-site detection requirements and (b) adequate on-site detection requires (i) a combination of the monitoring-tape method and ion-mobility spectrometry for point detection and (ii) a combination of the monitoring-tape method, atmospheric pressure chemical ionization mass spectrometry with counterflow introduction, and gas chromatography with a trap and special detectors for continuous monitoring. The basic properties of CWAs, the concept of on-site detection, and the sarin gas attacks in Japan as well as the forensic investigations thereof, are also explicated in this article. Copyright © 2014 Central Police University.

Wekiva Basin onsite sewage treatment and disposal system study

OpenAIRE

Booher, Paul

2006-01-01

Existing onsite systems and aquifer vulnerability in the Wekiva Basin. Recommendations from the Bureau of Onsite Sewage Programs, Division of Environmental Health, Florida Department of Health. (11 slides)

Effect of plant characteristics on the number of personnel

International Nuclear Information System (INIS)

Martin, H.D.

1986-01-01

Power plant organization and staff categories. Influence of plant size. Influence of plant complexity. Specifics of plant site and infrastructure. Contractual requirements for off-site activities. On-site requirements. Overstaffing, understaffing, promotion and motivation. (orig.)

Optimization of CCGT power plant and performance analysis using MATLAB/Simulink with actual operational data.

Science.gov (United States)

Hasan, Naimul; Rai, Jitendra Nath; Arora, Bharat Bhushan

2014-01-01

In the Modern scenario, the naturally available resources for power generation are being depleted at an alarming rate; firstly due to wastage of power at consumer end, secondly due to inefficiency of various power system components. A Combined Cycle Gas Turbine (CCGT) integrates two cycles- Brayton cycle (Gas Turbine) and Rankine cycle (Steam Turbine) with the objective of increasing overall plant efficiency. This is accomplished by utilising the exhaust of Gas Turbine through a waste-heat recovery boiler to run a Steam Turbine. The efficiency of a gas turbine which ranges from 28% to 33% can hence be raised to about 60% by recovering some of the low grade thermal energy from the exhaust gas for steam turbine process. This paper is a study for the modelling of CCGT and comparing it with actual operational data. The performance model for CCGT plant was developed in MATLAB/Simulink.

Advanced on-site conceptual simulator for Forsmark 3

International Nuclear Information System (INIS)

Johansson, G.; Sjoestrand, K.

1984-01-01

On-site conceptual simulators have been extensively used at Swedish nuclear power plants. Despite having access to identical replica simulators, both the Swedish State Power Board and the Swedish private power industry have ordered conceptual simulators during 1982. The motivation has been that a complete training programme requires access to both a replica and a conceptual simulator. The replica simulator is perfect for training in control room behaviour but less appropriate for ensuring deeper process understanding. On the other hand, the conceptual simulator is not well suited for getting the personnel acquainted with the control room but is perfect for extending their knowledge of the plant processes. In order to give a realistic description of these processes, the conceptual simulator model must be fairly advanced. The Forsmark 3 conceptual simulator simulates the entire primary system, including the details of the steam and feedwater systems. Considerable attention has also been devoted to the presentation of calculated variables. For example, all the variables in the data base (approx. 6600) can be presented on colour-graphic CRTs as functions of time. (author)

Design Status and Applications of Small reactors without On-site Refuelling

International Nuclear Information System (INIS)

Kuznetsov, V.

2006-01-01

Small reactors without on-site refuelling are the reactors that can operate without reloading and shuffling of fuel for a reasonably long period, consistent with plant economy and considerations of energy security, with no fresh or spent fuel being stored at a site during reactor operation. Such reactors could simplify the implementation of safeguards and provide certain guarantees of sovereignty to those countries that would prefer to lease fuel from a foreign vendor or, perhaps, an international fuel cycle centre. About 30 concepts of such reactors are being analyzed or developed in 6 IAEA Member States. They cover all principle reactor lines: water cooled, fast gas cooled, sodium cooled, lead or lead bismuth cooled and molten salt cooled reactors. An increased refuelling interval could be achieved with reduced core power density, burnable absorbers, or high conversion ratio. The design goals for small reactors without on-site refuelling, inter alia, include: difficult unauthorized access to fuel; design provisions to facilitate the implementation of safeguards; capability to survive all postulated accident scenarios without requiring emergency response in the public domain; economic competitiveness for anticipated market conditions and applications; the capability to achieve higher manufacturing quality through factory mass production, design standardization and common basis for design certification; and a flexibility in siting and applications. Such reactors are often considered in conjunction with fuel or NPP leasing Small reactors without on-site refuelling have many common technology development issues related to the provision of lifetime core operation, economic competitiveness, high level of safety and proliferation resistance. Reestablishment of a practice of licensing by test and establishment of legal provisions and the insurance scheme for a transit of fuel loads or factory fabricated reactors through the territory of a third country are mentioned as

75 FR 51845 - Chrysler Group, LLC Manufacturing Division St. Louis North Plant Including On-Site Leased Workers...

Science.gov (United States)

2010-08-23

... produce performance coating solutions for vehicles. The company reports that workers leased from DuPont Performance Coatings, a wholly-owned subsidiary of E.I. DuPont de Nemours Company, OEM, were employed on-site..., C R Associates, Syncreon, Robinson Solutions and Dupont Performance Coatings Fenton, MO; Amended...

Surveillance testing of onsite electrical power systems, several cases of standards misinterpretation in Spain

Energy Technology Data Exchange (ETDEWEB)

Recarte, I.; Cid, R. [Consejo de Seguridad Nuclear, Sor Angela de la Cruz, 3, Madrid 28016 (Spain)

1986-02-15

Two events related with the onsite electric Systems of Spanish nuclear power plants are discussed. The first of them is related with diesel generators, its compliance with technical specifications; with the valid test, failure classification and frequency of tests as defined in Regulatory Guide 1.108. The other problem concerns of the direct current batteries. Presently they are subject by technical specifications to testing of a discharge cycle for which they were not designed. (authors)

Predicting on-site environmental impacts of municipal engineering works

International Nuclear Information System (INIS)

Gangolells, Marta; Casals, Miquel; Forcada, Núria; Macarulla, Marcel

2014-01-01

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

Predicting on-site environmental impacts of municipal engineering works

Energy Technology Data Exchange (ETDEWEB)

Gangolells, Marta, E-mail: marta.gangolells@upc.edu; Casals, Miquel, E-mail: miquel.casals@upc.edu; Forcada, Núria, E-mail: nuria.forcada@upc.edu; Macarulla, Marcel, E-mail: marcel.macarulla@upc.edu

2014-01-15

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

Onsite defluoridation system for drinking water treatment using calcium carbonate.

Science.gov (United States)

Wong, Elaine Y; Stenstrom, Michael K

2018-06-15

Fluoride in drinking water has several effects on teeth and bones. At concentrations of 1-1.5 mg/L, fluoride can strengthen enamel, improving dental health, but at concentrations above 1.5 to 4 mg/L can cause dental fluorosis. At concentrations of 4-10 mg/L, skeletal fluorosis can occur. There are many areas of the world that have excessive fluoride in drinking water, such as China, India, Sri Lanka, and the Rift Valley countries in Africa. Treatment solutions are needed, especially in poor areas where drinking water treatment plants are not available. On-site or individual treatment alternatives can be attractive if constructed from common materials and if simple enough to be constructed and maintained by users. Advanced on-site methods, such as under sink reserve osmosis units, can remove fluoride but are too expensive for developing areas. This paper investigates calcium carbonate as a cost effective sorbent for an onsite defluoridation drinking water system. Batch and column experiments were performed to characterize F - removal properties. Fluoride sorption was described by a Freundlich isotherm model, and it was found that the equilibrium time was approximately 3 h. Calcium carbonate was found to have comparable F - removal abilities as the commercial ion exchange resins and possessed higher removal effectiveness compared to calcium containing eggshells and seashells. It was also found that the anion Cl- did not compete with F - at typical drinking water concentrations, having little impact on the effectiveness of the treatment system. A fluoride removal system is proposed that can be used at home and can be maintained by users. Through this work, we can be a step closer to bringing safe drinking water to those that do not have access to it. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biological carbon fixation: A study of Isochrysis sp. growth under actual coal-fired power plant's flue gas

International Nuclear Information System (INIS)

Yahya, Liyana; Chik, Muhammad Nazry; Pang, Mohd Asyraf Mohd Azmir

2013-01-01

Preliminary study on the growth of marine microalgae Isochrysis sp. was carried out using actual flue gas from a coal-fired power station. The species was cultured using a 2×10-L customized bubble column photobioreactor skid under specified culture conditions. With an initial culture density of 0.459 Abs (optical density at 560 nm wavelength), the species was found able to survive – observed by increases in optical densities, number of cells and weights – in the presence of actual coal-fired flue gas containing on average 4.08 % O 2 , 200.21 mg/m 3 SO 2 , 212.29 mg/m 3 NO x , 4.73 % CO 2 and 50.72 mg/m 3 CO. Results thus add value to the potential and capability of microalgae, especially for Isochrysis sp., to be the biological carbon fixer in neutralizing carbon emissions from power plants.

13 CFR 120.1050 - On-site reviews and examinations.

Science.gov (United States)

2010-01-01

... losses); (3) Management quality (including internal controls, loan portfolio management, and asset... Risk-Based Lender Oversight Supervision § 120.1050 On-site reviews and examinations. (a) On-site... operations management; (3) Credit administration; and (4) Compliance with Loan Program Requirements. (b) On...

Meteorological measurements at nuclear power plants

International Nuclear Information System (INIS)

1995-01-01

On-site meteorological measurements are necessary for evaluating atmospheric dispersion of gaseous effluents. Radiation doses in a plant's vicinity due to these effluents are calculated from the results of dispersion evaluations. The guide addresses the requirements for on-site meteorological measurement systems. Guide YVL 7.3 addresses atmospheric dispersion evaluations and calculation methods, Guide YVL 7.2 radiation dose calculations and Guide YVL 7.8 environmental data reporting. (5 refs.)

A 13-year cohort study of musculoskeletal disorders treated in an autoplant, on-site physiotherapy clinic.

Science.gov (United States)

Sadi, Jackie; MacDermid, Joy C; Chesworth, Bert; Birmingham, Trevor

2007-12-01

The purpose of this study was to describe the rate and distribution of treatment visits provided in an on-site, automotive plant, physiotherapy clinic over a 13-year period. A retrospective cohort study was conducted using data collected at an on-site physiotherapy clinic (1990-2002, 65,977 visits; n = 2,636 workers). The average age of workers was 43 +/- 9 years; most remained at work (85%) when treated. Disorders most commonly affected the shoulder, lumbar, and cervical regions; the median number of visits for these was 7, 6, and 5, respectively. Elbow disorders occurred commonly only for work-related complaints and required a median of eight visits. Rate of utilization was higher for women, with 47% of the plant's female workers attending physiotherapy in 1 year. Women had higher rates of cervical spine (12 vs. 22%) and wrist (5 vs. 10%) disorders. The two most common causes of injury reported by workers with an industrial injury were "frank injury arising out of normal employment" (51%) and "gradual onset/no frank injury" (37%). The diagnosis most often reported by the physiotherapist after initial assessment was "strain" which was similar for both industrial (43%) and non-industrial (49%) injuries. The six main departments in this automotive plant account for 93% of all industrial injuries reported. Final Assembly accounted for the largest number and highest rate of injury, although shift variability was noted in utilization rates (13 vs. 26%), despite the same tasks, shift schedules, and demographics. Although there was no control group, the number of visits to discharge was lower than reported in the literature for off-site physical therapy; there was a large reduction in claims (441-275) following introduction of the clinic and reduced duration/costs of lost time were identified by the employer as a rationale to continue and enhance the service over time. On-site physiotherapy services can provide early, cost-effective management of WRMSD in the automotive

LM5000 gas turbine generating plant for Tenaga Nasional Berhad Sultan Salahuddin Abdul Aziz power station (Malaysia)

Energy Technology Data Exchange (ETDEWEB)

Ishizuka, T.; Shioya, Y.; Furuya, M.; Saito, K. [Ishikawajima-Harima Heavy Indutries Co. Ltd., Tokyo (Japan)

1995-01-01

The LM5000 gas turbine generating plant (35,000 kW) for Tenaga Nasional Berhad Sultan Salahuddin Abdul Aziz Power Station (Malaysia) was outlined. The lightweight power turbine of 16 ton was adopted to reduce an on-site installation time, and integrated into a single package together with the gas generator, while all the auxiliary units were assembled completely before delivery. Because the plant was for peak cut use, the hydraulic starting unit was adopted, in particular, considering starting operation, and the diesel engine generator was provided to drive the unit in complete power failure. The reliability of operation and monitoring was also enhanced by triplicated digital control. The plant output capacity was well beyond the required one during actual operation, and the thermal efficiency of 36.0-36.3% was obtained. Because the power plant was installed in the rainy western part of Malaysia, protective measures of the plant from rain were taken into careful consideration, for example, the air intake port of the air-cooled generator was faced downward, and provided with a condensation eliminator. 4 figs.

On-Site Inspection RadioIsotopic Spectroscopy (Osiris) System Development

Energy Technology Data Exchange (ETDEWEB)

Caffrey, Gus J. [Idaho National Laboratory, Idaho Falls, ID (United States); Egger, Ann E. [Idaho National Laboratory, Idaho Falls, ID (United States); Krebs, Kenneth M. [Idaho National Laboratory, Idaho Falls, ID (United States); Milbrath, B. D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jordan, D. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Warren, G. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilmer, N. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-09-01

We have designed and tested hardware and software for the acquisition and analysis of high-resolution gamma-ray spectra during on-site inspections under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The On-Site Inspection RadioIsotopic Spectroscopy—Osiris—software filters the spectral data to display only radioisotopic information relevant to CTBT on-site inspections, e.g.,132I. A set of over 100 fission-product spectra was employed for Osiris testing. These spectra were measured, where possible, or generated by modeling. The synthetic test spectral compositions include non-nuclear-explosion scenarios, e.g., a severe nuclear reactor accident, and nuclear-explosion scenarios such as a vented underground nuclear test. Comparing its computer-based analyses to expert visual analyses of the test spectra, Osiris correctly identifies CTBT-relevant fission product isotopes at the 95% level or better.The Osiris gamma-ray spectrometer is a mechanically-cooled, battery-powered ORTEC Transpec-100, chosen to avoid the need for liquid nitrogen during on-site inspections. The spectrometer was used successfully during the recent 2014 CTBT Integrated Field Exercise in Jordan. The spectrometer is controlled and the spectral data analyzed by a Panasonic Toughbook notebook computer. To date, software development has been the main focus of the Osiris project. In FY2016-17, we plan to modify the Osiris hardware, integrate the Osiris software and hardware, and conduct rigorous field tests to ensure that the Osiris system will function correctly during CTBT on-site inspections. The planned development will raise Osiris to technology readiness level TRL-8; transfer the Osiris technology to a commercial manufacturer, and demonstrate Osiris to potential CTBT on-site inspectors.

On-Site Inspection RadioIsotopic Spectroscopy (Osiris) System Development

International Nuclear Information System (INIS)

Caffrey, Gus J.; Egger, Ann E.; Krebs, Kenneth M.; Milbrath, B. D.; Jordan, D. V.; Warren, G. A.; Wilmer, N. G.

2015-01-01

We have designed and tested hardware and software for the acquisition and analysis of high-resolution gamma-ray spectra during on-site inspections under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The On-Site Inspection RadioIsotopic Spectroscopy-Osiris-software filters the spectral data to display only radioisotopic information relevant to CTBT on-site inspections, e.g.,132I. A set of over 100 fission-product spectra was employed for Osiris testing. These spectra were measured, where possible, or generated by modeling. The synthetic test spectral compositions include non-nuclear-explosion scenarios, e.g., a severe nuclear reactor accident, and nuclear-explosion scenarios such as a vented underground nuclear test. Comparing its computer-based analyses to expert visual analyses of the test spectra, Osiris correctly identifies CTBT-relevant fission product isotopes at the 95% level or better.The Osiris gamma-ray spectrometer is a mechanically-cooled, battery-powered ORTEC Transpec-100, chosen to avoid the need for liquid nitrogen during on-site inspections. The spectrometer was used successfully during the recent 2014 CTBT Integrated Field Exercise in Jordan. The spectrometer is controlled and the spectral data analyzed by a Panasonic Toughbook notebook computer. To date, software development has been the main focus of the Osiris project. In FY2016-17, we plan to modify the Osiris hardware, integrate the Osiris software and hardware, and conduct rigorous field tests to ensure that the Osiris system will function correctly during CTBT on-site inspections. The planned development will raise Osiris to technology readiness level TRL-8; transfer the Osiris technology to a commercial manufacturer, and demonstrate Osiris to potential CTBT on-site inspectors.

German risk study nuclear power plants, phase B

International Nuclear Information System (INIS)

1990-01-01

The book documents the results of the probabilistic safety analysis performed at the Biblis-B reference plant. It covers 1) result course analyses and reliability analyses of loss of coolant accidents and transients without and with regard to on-site emergency measures; 2) event tree analyses of on-site and off-site events; 3) analyses of the function of the safety tank in the case of core meltdown accidents, and of the release of fission products into the environment in such case. The probability of a core meltdown is about 3-4 to 100,000 per year and plant. (HP) [de

Millstone nuclear power plant emergency system assessment

International Nuclear Information System (INIS)

Akhmad Khusyairi

2011-01-01

U.S.NRC determined an obligation to build a nuclear power plant emergency response organization for both on-site and off-site. Millstone Nuclear Power Plants have 3 nuclear reactors and 2 of 3 still in commercial operation. Reactor unit 1, BWR type has been permanently shut down in 1998, while the two others, units 2 and 3 obtain the extended operating license respectively until 2035 and 2045. As a nuclear installation has the high potential radiological impact, Millstone nuclear power plant emergency response organization must establish both on-site or off-site. Emergency response organization that is formed must involve several state agencies, both state agencies and municipality. They have specific duties and functions in a state of emergency, so that protective measures can be undertaken in accordance with the community that has been planned. Meanwhile, NRC conduct their own independent assessment of nuclear power plant emergencies. (author)

Risk management of onsite transportation of nuclear waste

International Nuclear Information System (INIS)

Field, J.G.; Wang, O.S.; Mercado, J.E.

1993-01-01

The United States Department of Energy (DOE) Hanford Site recently has undergone a significant change in mission. The focus of operations has shifted from plutonium production to environmental restoration. This transition has caused a substantial increase in quantities of nuclear waste and other hazardous materials packaged and transported onsite. In response to the escalating transportation activity, Westinghouse Hanford Company (Westinghouse Hanford), the Hanford Site operations and engineering contractor, is proposing an integrated risk assessment methodology and risk management strategy to enhance the safety of onsite packaging and transportation operations involving nuclear waste. The proposed methodology consists of three integral parts: risk assessment, risk acceptance criteria, and risk minimization. The purpose of the methodology is to ensure that the risk for each ongoing transportation activity is acceptable and to minimize the overall risk for current and future onsite operations. (authors). 2 figs., 6 refs

Risk management of onsite transportation of nuclear waste

International Nuclear Information System (INIS)

Field, J.G.; Wang, O.S.; Mercado, J.E.

1993-03-01

The United States Department of Energy (DOE) Hanford Site recently has undergone a significant change in mission. The focus of operations has shifted from plutonium production to environmental restoration. This transition has caused a substantial increase in quantities of nuclear waste and other hazardous materials packaged and transported onsite. In response to the escalating transportation activity, Westinghouse Hanford Company (Westinghouse Hanford), the Hanford Site operations and engineering contractor, is proposing an integrated risk assessment methodology and risk management strategy to enhance the safety of onsite packaging and transportation operations involving nuclear waste. The proposed methodology consists of three integral parts: risk assessment, risk acceptance criteria, and risk minimization. The purpose of the methodology is to ensure that the risk for each ongoing transportation activity is acceptable and to minimize the overall risk for current and future onsite operations

Assays of dioxins and dioxin-like compounds in actually contaminated soils using transgenic tobacco plants carrying a recombinant mouse aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system.

Science.gov (United States)

Inui, Hideyuki; Gion, Keiko; Utani, Yasushi; Wakai, Taketo; Kodama, Susumu; Eun, Heesoo; Kim, Yun-Seok; Ohkawa, Hideo

2012-01-01

The transgenic tobacco plant XD4V-26 carrying the recombinant mouse aryl hydrocarbon receptor XD4V-mediated β-glucuronidase (GUS) reporter gene expression system was used for assay of dioxins and dioxin-like compounds consisting of polychlorinated dibenzeno-p-dioxins, polychlorinated dibenzofurans, and coplanar polychlorinated biphenyls (Co-PCBs) in actually contaminated soils. The transgenic tobacco plant XD4V-26 showed a significant dose-dependent induced GUS activity when cultured on MS medium containing PCB126 [toxic equivalency factor (TEF) = 0.1]. In contrast, PCB169 and PCB180, which have 0.03 of TEF and unassigned TEF values, respectively, did not significantly induce GUS activity under the same conditions as with PCB126. When the tobacco plants were cultivated for up to 5 weeks on actually contaminated soils with dioxins and dioxin-like compounds collected from the periphery of an incinerator used for disposal of residential and industrial wastes, GUS activity in the leaves was dose-dependently increased. The plants clearly detected 360 pg-TEQ g(-1) of dioxins and dioxin-like compounds in this assay. There was a positive correlation between GUS activity and TEQ value of dioxins and dioxin-like compounds in the plants. This assay does not require any extraction and purification processes for the actually contaminated soil samples.

Onsite gas storage for industrial customers

International Nuclear Information System (INIS)

Shikari, Y.A.

1990-01-01

The changing pattern of industrial gas marketing in the United States and other countries has placed new pressures on industrial users to assume responsibility for assuring their own supply. Technological changes in manufacturing processes have placed greater emphasis on assuring fuel quality and many processes can no longer tolerate near-substitutes such as distillate fuel oil and LPG. One way to take advantage of lower cost interruptible gas service contracts is to provide stand-by sources of gas onsite which can be used when the primary supply is curtailed. This paper describes the methods which an industrial gas consumer could use to store gas onsite (or close by an industrial factory) and their technical and economic advantages or limitations. The regulatory factors such as environmental and safety issues are reviewed and the advantages and disadvantages of each method are described. The application of emerging technologies such as storing natural gas on adsorbents at low pressure and solid absorption in LPG are reviewed and the research needed to make them acceptable is discussed. The potential applications in the marketplace are also discussed and the economics of onsite storage of natural gas is compared to other alternatives. (author). 11 refs, 5 figs, 1 tab

On-site energy consumption at softwood sawmills in Montana

Science.gov (United States)

Dan Loeffler; Nathaniel Anderson; Todd A. Morgan; Colin B. Sorenson

2016-01-01

Total on-site energy requirements for wood product manufacturing are generally not well understood or publicly available, particularly at subregional scales, such as the state level. This article uses a mail survey of softwood sawmills in Montana to develop a profile of all on-site energy consumption. Energy use is delineated by fuel type on a production basis...

Recycling of treated domestic effluent from an on-site wastewater treatment system for hydroponics.

Science.gov (United States)

Oyama, N; Nair, J; Ho, G E

2005-01-01

An alternative method to conserve water and produce crops in arid regions is through hydroponics. Application of treated wastewater for hydroponics will help in stripping off nutrients from wastewater, maximising reuse through reduced evaporation losses, increasing control on quality of water and reducing risk of pathogen contamination. This study focuses on the efficiency of treated wastewater from an on-site aerobic wastewater treatment unit. The experiment aimed to investigate 1) nutrient reduction 2) microbial reduction and 3) growth rate of plants fed on wastewater compared to a commercial hydroponics medium. The study revealed that the chemical and microbial quality of wastewater after hydroponics was safe and satisfactory for irrigation and plant growth rate in wastewater hydroponics was similar to those grown in a commercial medium.

Effluent Information System (EIS) / Onsite Discharge Information System (ODIS): 1986 executive summary

International Nuclear Information System (INIS)

Watanabe, T.

1987-09-01

Department of Energy (DOE) data base systems aid DOE-Headquarters and Field Offices in managing the radioactive air and liquid effluents from DOE facilities. Data on effluents released offsite are entered into effluent information system (EIS) and data on effluents discharged onsite and retained onsite are entered into Onsite Discharge Information System (ODIS). This document is a summary of information obtained from the CY 1986 effluent data received from all DOE and DOE contractor facilities and entered in the data bases. Data from previous years are also included. The summary consists of information for effluents released offsite, and information for effluents retained onsite

A reliability program for emergency diesel generators at nuclear power plants: Maintenance, surveillance, and condition monitoring

International Nuclear Information System (INIS)

Lofgren, E.V.; Henderson, W.; Burghardt, D.; Kripps, L.; Rothleder, B.

1988-12-01

This report is a companion report on NUREG/CR-5078, Volume 1, ''A Reliability Program for Emergency Diesel Generators at Nuclear Power Plants: Program Structure.'' The purpose of this report is to provide technical findings and insights related to: failure evaluation, troubleshooting, maintenance, surveillance, and condition monitoring. Examples and recommendations are provided for each of these areas based on actual emergency diesel generator (EDG) operating experience and the opinions of diesel generator experts. This report expands the more general guidance provided in Volume 1. In addition, a discussion of EDG interactions with other plant systems (e.g., instrument, air, service water, dc power) is provided since experience has shown that these support systems and their operation can adversely affect EDG reliability. Portions of this report have been designed for use by onsite personnel for evaluating operational characteristics of EDGs. 5 refs., 8 figs., 7 tabs

In-situ and on-site technologies; An overview

Energy Technology Data Exchange (ETDEWEB)

Freestone, F J [Technical Support Branch, ORD, RREL, U.S. EPA, Edison, New Jersey (US)

1990-01-01

A broad analysis of and perspective on the characteristics and measured performance of in-situ and on-site treatment technologies available for remediation of contaminated soils, groundwater and associated debris at hazardous waste sites. Included in the analysis is information from U.S. and European sources. Available data are appended from nine recently completed field demonstrations from the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) program. The most frequently applied technology areas appear to be on-site thermal treatment for organics, on-site and in-situ solidification/stabilization technologies for most inorganics and metals, traditional on-site water treatment techniques, and soil vapor extraction for volatile organic compounds. Rapidly developing areas include bioremediation technologies, and concentration technologies. Two of the weakest areas include materials handling for such situations as excavating buried drums and soils with volatiles safely, and performing physical and chemical site characterization using technology-sensitive parameters. An area worthy of international cooperatin is that of performing benchscale screening and treatability studies, including the specification of key parameters needing measurement, techniques for such measurement and for interpretation, storage and retrieval of resulting data. We are in the process of evaluating existing treatability study data on soils and debris, and will be installing that data onto an on-line information system available to the public world-wide. (AB) 10 refs.

Analysis of a fuel cell on-site integrated energy system for a residential complex

Science.gov (United States)

Simons, S. N.; Maag, W. L.

1979-01-01

The energy use and costs of the on-site integrated energy system (OS/IES) which provides electric power from an on-site power plant and recovers heat that would normally be rejected to the environment is compared to a conventional system purchasing electricity from a utility and a phosphoric acid fuel cell powered system. The analysis showed that for a 500-unit apartment complex a fuel OS/IES would be about 10% more energy conservative in terms of total coal consumption than a diesel OS/IES system or a conventional system. The fuel cell OS/IES capital costs could be 30 to 55% greater than the diesel OS/IES capital costs for the same life cycle costs. The life cycle cost of a fuel cell OS/IES would be lower than that for a conventional system as long as the cost of electricity is greater than $0.05 to $0.065/kWh. An analysis of several parametric combinations of fuel cell power plant and state-of-art energy recovery systems and annual fuel requirement calculations for four locations were made. It was shown that OS/IES component choices are a major factor in fuel consumption, with the least efficient system using 25% more fuel than the most efficient. Central air conditioning and heat pumps result in minimum fuel consumption while individual air conditioning units increase it, and in general the fuel cell of highest electrical efficiency has the lowest fuel consumption.

Remote sensing of potential and actual daily transpiration of plant canopies based on spectral reflectance and infrared thermal measurements: Concept with preliminary test

International Nuclear Information System (INIS)

Inoue, Y.; Moran, M.S.; Pinter, P.J.Jr.

1994-01-01

A new concept for estimating potential and actual values of daily transpiration rate of vegetation canopies is presented along with results of an initial test. The method is based on a physical foundation of spectral radiation balance for a vegetation canopy, the key inputs to the model being the remotely sensed spectral reflectance and the surface temperature of the plant canopy. The radiation interception or absorptance is estimated more directly from remotely sensed spectral data than it is from the leaf area index. The potential daily transpiration is defined as a linear function of the absorbed solar radiation, which can be estimated using a linear relationship between the fraction absorptance of solar radiation and the remotely sensed Soil Adjusted Vegetation Index for the canopy. The actual daily transpiration rate is estimated by combining this concept with the Jackson-Idso Crop Water Stress Index, which also can be calculated from remotely sensed plant leaf temperatures measured by infrared thermometry. An initial demonstration with data sets from an alfalfa crop and a rangeland suggests that the method may give reasonable estimates of potential and actual values of daily transpiration rate over diverse vegetation area based on simple remote sensing measurements and basic meteorological parameters

Removal of bacterial cells, antibiotic resistance genes and integrase genes by on-site hospital wastewater treatment plants: surveillance of treated hospital effluent quality

KAUST Repository

Timraz, Kenda Hussain Hassan

2016-12-15

This study aims to evaluate the removal efficiency of microbial contaminants, including total cell counts, antibiotic-resistant bacteria (ARB), antibiotic resistance genes (ARGs, e.g. tetO, tetZ, sul1 and sul2) and integrase genes (e.g. intl1 and intl2), by wastewater treatment plants (WWTPs) operated on-site of two hospitals (i.e., SH WWTP and IH WWTP). Both SH and IH WWTPs utilize the conventional activated sludge process but differences in the removal efficiencies were observed. Over the 2 week sampling period, IH WWTP outperformed SH WWTP, and achieved an approximate 0.388 to 2.49-log log removal values (LRVs) for total cell counts compared to the 0.010 to 0.162-log removal in SH WWTP. Although ARB were present in the hospital influent, the treatment process of both hospitals effectively removed ARB from most of the effluent samples. In instances where ARB were recovered in the effluent, none of the viable isolates were identified to be opportunistic pathogenic species based on 16S rRNA gene sequencing. However, sul1 and intl1 genes remained detectable at up to 105 copies per mL or 8 x 10(-1) copies per 16S rRNA gene in the treated effluent, with an LRV of less than 1.2. When the treated effluent is discharged from hospital WWTPs into the public sewer for further treatment as per requirement in many countries, the detected amount of ARGs and integrase genes in the hospital effluent can become a potential source of horizontal gene dissemination in the municipal WWTP. Proper on-site wastewater treatment and surveillance of the effluent quality for emerging contaminants are therefore highly recommended.

Do On-Site Mental Health Professionals Change Pediatricians' Responses to Children's Mental Health Problems?

Science.gov (United States)

McCue Horwitz, Sarah; Storfer-Isser, Amy; Kerker, Bonnie D; Szilagyi, Moira; Garner, Andrew S; O'Connor, Karen G; Hoagwood, Kimberly E; Green, Cori M; Foy, Jane M; Stein, Ruth E K

2016-01-01

To assess the availability of on-site mental health professionals (MHPs) in primary care; to examine practice/pediatrician characteristics associated with on-site MHPs; and to determine whether the presence of on-site MHPs is related to pediatricians' comanaging or more frequently identifying, treating/managing, or referring mental health (MH) problems. Analyses included American Academy of Pediatrics (AAP) members who participated in an AAP Periodic Survey in 2013 and who practiced general pediatrics (n = 321). Measures included sociodemographics, practice characteristics, questions about on-site MHPs, comanagement of MH problems, and pediatricians' behaviors in response to 5 prevalent MH problems. Weighted univariate, bivariate, and multivariable analyses were performed. Thirty-five percent reported on-site MHPs. Practice characteristics (medical schools, universities, health maintenance organizations, managed, or referred 5 common child MH problems. Among the subset of pediatricians who reported comanaging, there was an association with comanagement when the on-site MHP was a child psychiatrist, substance abuse counselor, or social worker. On-site MHPs are more frequent in settings where low-income children are served and where pediatricians train. Pediatricians who comanage MH problems are more likely to do so when the on-site MHP is a child psychiatrist, substance abuse counselor, or social worker. Overall, on-site MHPs were not associated with comanagement or increased likelihood of pediatricians identifying, treating/managing, or referring children with 5 common child MH problems. Copyright © 2016 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Phonon transmission and thermal conductance in one-dimensional system with on-site potential disorder

International Nuclear Information System (INIS)

Ma Songshan; Xu Hui; Deng Honggui; Yang Bingchu

2011-01-01

The role of on-site potential disorder on phonon transmission and thermal conductance of one-dimensional system is investigated. We found that the on-site potential disorder can lead to the localization of phonons, and has great effect on the phonon transmission and thermal conductance of the system. As on-site potential disorder W increases, the transmission coefficients decrease, and approach zero at the band edges. Corresponding, the thermal conductance decreases drastically, and the curves for thermal conductance exhibit a series of steps and plateaus. Meanwhile, when the on-site potential disorder W is strong enough, the thermal conductance decreases dramatically with the increase of system size N. We also found that the efficiency of reducing thermal conductance by increasing the on-site potential disorder strength is much better than that by increasing the on-site potential's amplitude. - Highlights: → We studied the effect of on-site potential disorder on thermal transport. → Increasing disorder will decrease thermal transport. → Increasing system size will also decrease its thermal conductance. → Increasing disorder is more efficient than other in reducing thermal conductance.

Evaluation of reliability of on-site A.C. power systems based on maintenance records

Energy Technology Data Exchange (ETDEWEB)

Basso, G.; Pia, S. [ENEA/TERM/VAOEC, C.R.E. Casaccla via Anguillarese, 00100 Roma/Rome (Italy); Fusari, W. [ENEL, Rome (Italy); Soressi, G.; Vaccari, G. [ENEL, Centro di Ricerca Termica e Nucl., Via Rubattino, 54, 1-20134 Mllano/Milan (Italy)

1986-02-15

To the end of ascertain in what extent the evaluation of reliability of emergency diesel generators (D.G.) can be improved by means of a deeper knowledge of their operating history a study has been carried-out on 21 D.G. sets: 4 D.G. of the Caorso nuclear plant (BWR, 870 MWe) and 17 D.G. in service at 6 steam-electric fossil-fuelled plants. The major points of interest resulting from this study are: 1) reliability assessments of A.C. on-site power Systems, made on the basis of outcomes of surveillance tests, may lead to results which overestimate the real performance. 2) the unreliability of a redundant System of stand-by components is determined in large extent by unavailabilities due to scheduled and unscheduled maintenance, latent failures, tests. (authors)

Evaluation of reliability of on-site A.C. power systems based on maintenance records

International Nuclear Information System (INIS)

Basso, G.; Pia, S.; Fusari, W.; Soressi, G.; Vaccari, G.

1986-01-01

To the end of ascertain in what extent the evaluation of reliability of emergency diesel generators (D.G.) can be improved by means of a deeper knowledge of their operating history a study has been carried-out on 21 D.G. sets: 4 D.G. of the Caorso nuclear plant (BWR, 870 MWe) and 17 D.G. in service at 6 steam-electric fossil-fuelled plants. The major points of interest resulting from this study are: 1) reliability assessments of A.C. on-site power Systems, made on the basis of outcomes of surveillance tests, may lead to results which overestimate the real performance. 2) the unreliability of a redundant System of stand-by components is determined in large extent by unavailabilities due to scheduled and unscheduled maintenance, latent failures, tests. (authors)

IAEA verification of materials accounting in commercial reprocessing plants

International Nuclear Information System (INIS)

Gutmacher, R.G.; Hakkila, E.A.

1987-01-01

The reprocessing plants currently under International Atomic Energy Agency (IAEA) safeguards have design capacities up to 210 tonnes of heavy metal per year. All of the plants use conventional materials accounting for safeguards. However, several larger commercial reprocessing plants are being designed with capacities of 350 to 1200 tonnes of heavy metal per year. It is likely that many of these plants, as well as some of the existing smaller ones, will adopt near-real-time materials accounting. The major effect of the combination of larger plants and near-real-time accounting on IAEA safeguards will be the demand for greater timeliness of verification. Continuous inspector presence may be required, as well as more on-site measurements by the inspector. In this paper, the authors review what needs to be verified, as well as current inspector activities in the process area. The bulk of the paper describes rapid, easy-to-use measurement techniques and instruments that may be applied to on-site verification measurements

75 FR 879 - National Semiconductor Corporation Arlington Manufacturing Site Including On-Site Leased Workers...

Science.gov (United States)

2010-01-06

... engaged in activities related to the production of integrated circuits. The company reports that on-site... Corporation Arlington Manufacturing Site Including On-Site Leased Workers From GCA, CMPA (Silverleaf), Custom..., applicable to workers of National Semiconductor Corporation, Arlington Manufacturing Site, including on-site...

Steady and transient regimes in hydropower plants

Science.gov (United States)

Gajic, A.

2013-12-01

Hydropower plant that has been in operation for about 30 years has to be reconstructed. They have already installed 12 Kaplan turbines, the largest in the world at that time. The existing CAM relationship was determined based on hydraulic model tests and checked by efficiency on-site tests. It was also tested based on turbine bearing vibrations. In order to discover vibrations and long cracks on stay vanes detailed on-site measurements were performed. Influence of the modification of the trailing edges on the dynamic stresses of the stay vanes is also shown. In order to improve power output transient regimes were analyzed, both experimentally and numerically. Reversible hydropower plant, a pioneer in Europe since it was the first Pump storage power plant constructed with the highest head pump-turbines in the world. Analyses of transient regimes discover some problems with S-shaped characteristics coupled with non-symmetrical penstock.

Steady and transient regimes in hydropower plants

International Nuclear Information System (INIS)

Gajic, A

2013-01-01

Hydropower plant that has been in operation for about 30 years has to be reconstructed. They have already installed 12 Kaplan turbines, the largest in the world at that time. The existing CAM relationship was determined based on hydraulic model tests and checked by efficiency on-site tests. It was also tested based on turbine bearing vibrations. In order to discover vibrations and long cracks on stay vanes detailed on-site measurements were performed. Influence of the modification of the trailing edges on the dynamic stresses of the stay vanes is also shown. In order to improve power output transient regimes were analyzed, both experimentally and numerically. Reversible hydropower plant, a pioneer in Europe since it was the first Pump storage power plant constructed with the highest head pump-turbines in the world. Analyses of transient regimes discover some problems with S-shaped characteristics coupled with non-symmetrical penstock

75 FR 41895 - Whirlpool Corporation, Evansville Division, Including On-Site Leased Workers From Andrews...

Science.gov (United States)

2010-07-19

..., Evansville Division, Including On-Site Leased Workers From Andrews International, Inc., M.H. Equipment, and... 10321). The notice was amended on May 25, 2010 to include on-site leased workers from Andrews... workers of Whirlpool Corporation, Evansville Division, including on-site leased workers from Andrews...

Experiences in solving the challenges of on-site degree programs

International Nuclear Information System (INIS)

Christenson, J.M.; Eckart, L.E.

1987-01-01

The University of Cincinnati (UC) Nuclear Engineering Program Faculty has now had six years of experience in delivering on-site educational programs to nuclear power plant technical personnel. Programs of this type present a variety of challenges to the faculty, the management of the client utility and to the students who become involved in a particular program. This paper describes how each of these groups can identify and successfully solve these challenges. The solutions the authors describe are drawn from their own experiences which have been described in some detail elsewhere. Other solutions to those challenges are certainly possible. They make no claim for the particular ones they offer, beyond the fact that they have worked over a sustained period of time and that results they have produced have left all three parties mutually satisfied

The interrelationship between environmental goals, productivity improvement, and increased energy efficiency in integrated paper and steel plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

This report presents the results of an investigation into the interrelationships between plant-level productivity, energy efficiency, and environmental improvements for integrated pulp and paper mills and integrated steel mills in the US. Integrated paper and steel plants are defined as those facilities that use some form of onsite raw material to produce final products (for example, paper and paperboard or finished steel). Fully integrated pulp and paper mills produce onsite the pulp used to manufacture paper from virgin wood fiber, secondary fiber, or nonwood fiber. Fully integrated steel mills process steel from coal, iron ore, and scrap inputs and have onsite coke oven facilities.

Process design and economics of on-site cellulase production on various carbon sources in a softwood-based ethanol plant.

Science.gov (United States)

Barta, Zsolt; Kovacs, Krisztina; Reczey, Kati; Zacchi, Guido

2010-06-28

On-site cellulase enzyme fermentation in a softwood-to-ethanol process, based on SO(2)-catalysed steam pretreatment followed by simultaneous saccharification and fermentation, was investigated from a techno-economic aspect using Aspen Plus© and Aspen Icarus Process Evaluator© softwares. The effect of varying the carbon source of enzyme fermentation, at constant protein and mycelium yields, was monitored through the whole process. Enzyme production step decreased the overall ethanol yield (270 L/dry tonne of raw material in the case of purchased enzymes) by 5-16 L/tonne. Capital cost was found to be the main cost contributor to enzyme fermentation, constituting to 60-78% of the enzyme production cost, which was in the range of 0.42-0.53 SEK/L ethanol. The lowest minimum ethanol selling prices (4.71 and 4.82 SEK/L) were obtained in those scenarios, where pretreated liquid fraction supplemented with molasses was used as carbon source. In some scenarios, on-site enzyme fermentation was found to be a feasible alternative.

Onsite transportation of radioactive materials at the Savannah River Site

Energy Technology Data Exchange (ETDEWEB)

Watkins, R.

2015-03-03

The Savannah River Site (SRS) Transportation Safety Document (TSD) defines the onsite packaging and transportation safety program at SRS and demonstrates its compliance with Department of Energy (DOE) transportation safety requirements, to include DOE Order 460.1C, DOE Order 461.2, Onsite Packaging and Transfer of Materials of National Security Interest, and 10 CFR 830, Nuclear Safety Management (Subpart B).

Predicting on-site environmental impacts of municipal engineering works

OpenAIRE

Gangolells Solanellas, Marta; Casals Casanova, Miquel; Forcada Matheu, Núria; Macarulla Martí, Marcel

2014-01-01

The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling mun...

High-Strength Domestic Wastewater Treatment and Reuse with Onsite Passive Methods

Directory of Open Access Journals (Sweden)

José de Anda

2018-01-01

Full Text Available This paper describes the preliminary monitoring results of an onsite pilot wastewater treatment plant consisting of a septic tank, an anaerobic up-flow filter, and a horizontal subsurface flow wetland system planted with Agapanthus africanus. The system was designed to treat heavily polluted domestic wastewater produced in a research and development (R&D center, reaching additional goals of zero energy consumption and eliminating the use of chemical additives. First water quality data shows that organic load in the treated sewage were removed achieving more than 95% efficiency. Nutrients were removed by almost 50%, and fecal and total coliform counts decreased by 99.96%. The results were compared to official Mexican regulations for wastewater discharged into lakes and reservoirs complied with all of them except for nutrients. In this pilot project, the resulting treated wastewater was directly reused for watering the green areas of the R&D center. The result was that the excess of nutrients improved the quality of the grass, avoiding the use of synthetic fertilizers, and created a wetland habitat for small wildlife species living in the area.

13 CFR 120.1051 - Frequency of on-site reviews and examinations.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Frequency of on-site reviews and examinations. 120.1051 Section 120.1051 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Risk-Based Lender Oversight Supervision § 120.1051 Frequency of on-site reviews and examinations...

The extent of on-site leakage in selected suburbs of Johannesburg ...

African Journals Online (AJOL)

This study investigated on-site leakage on 182 properties with relatively new municipal water meters in well-established suburbs of Johannesburg. A methodology was developed to estimate the on-site leakage rate from readings taken from these municipal water meters, which was then adjusted to account for metering ...

Do On-site Mental Health Professionals Change Pediatricians’ Responses to Children’s Mental Health Problems?

Science.gov (United States)

Horwitz, Sarah McCue; Storfer-Isser, Amy; Kerker, Bonnie D.; Szilagyi, Moira; Garner, Andrew S.; O’Connor, Karen G.; Hoagwood, Kimberly E.; Green, Cori M.; Foy, Jane M.; Stein, Ruth E.K.

2016-01-01

Objective The objectives were to: assess the availability of on-site mental health professionals (MHP) in primary care; examine practice/pediatrician characteristics associated with on-site MHPs; and determine whether presence of on-site MHPs is related to pediatricians’ co-managing or more frequently identifying, treat/managing or referring MH problems. Methods Analyses included AAP members who participated in an AAP Periodic Survey in 2013 and who practiced general pediatrics (N=321). Measures included socio-demographics, practice characteristics, questions on about on-site MHPs, co-management of MH problems and pediatricians’ behaviors in response to 5 prevalent MH problems. Weighted univariate, bivariate and multivariable analyses were performed. Results Thirty-five percent reported on-site MHPs. Practice characteristics (medical schools/universities/HMOs, <100 visits/week, <80% of patients privately insured), and interactions of practice location (urban) with visits and patient insurance, were associated with on-site MHPs. There was no overall association between co-location and co-management or whether pediatricians usually identified, treat/managed or referred 5 common child MH problems. Among the subset of pediatricians who reported co-managing there was an association with co-management when the on-site MHP was a child psychiatrist, SA counselor, or social worker. Conclusions On-site MHPs are more frequent in settings where low-income children are served and where pediatricians train. Pediatricians who co-manage MH problems are more likely to do so when the on-site MHP is a child psychiatrist, SA counselor, or social worker. Overall, on-site MHPs were not associated with co-management or increased likelihood of pediatricians identifying, treating/managing, or referring children with 5 common child MH problems. PMID:27064141

Requirements of on-site facilities

International Nuclear Information System (INIS)

Burchardt, H.

1977-01-01

1) Requirements of on-site facilities: a) brief description of supplying the site with electricity and water; communication facilities, b) necessary facilities for containment and pipeline installation, c) necessary facilities for storage, safety, accommodation of personnel, housing; workshops; 2) Site management: a) Organisation schedules for 'turn-key-jobs' and 'single commission', b) Duties of the supervisory staff. (orig.) [de

Intruder dose pathway analysis for the onsite disposal of commercial radioactive waste

International Nuclear Information System (INIS)

Kennedy, W.E. Jr.; Peloquin, R.A.; Napier, B.A.

1984-10-01

Because of uncertainties associated with assessing the potential risks from onsite burials of commercial radioactive waste, the US Nuclear Regulatory Commission (NRC) has amended its regulations to provide greater assurance that buried radioactive material will not present a hazard to public health and safety. The amended regulations now require licensees to apply for approval of proposed procedures for onsite disposal pursuant to 10 CFR 20.302. The NRC technically reviews these requests on a case-by-case basis. These technical reviews require modeling potential pathways to man and projecting radiation dose commitments. This paper contains a summary of our efforts to develop human-intrusion scenarios and to modify a version of the MAXI computer program for potential use by the NRC in reviewing applications for onsite radioactive waste disposal. The ONSITE/MAXI1 computer software package contains four computer codes. ONSITE is the interactive user interface that allows the end-user to simply and efficiently create and use the radiation-exposure scenarios. MAXI1 is then used with the scenario information to calculate the maximum annual dose to the exposed individual from selected pathways. 1 figure

Postulated accident scenarios for the on-site transport of spent nuclear fuel

International Nuclear Information System (INIS)

Morandin, G.; Sauve, R.

2004-01-01

Once a spent fuel container is loaded with spent fuel it typically travels on-site to a processing building for permanent lid attachment. During on-site transport a lid clamp is utilized to ensure the container lid remains in place. The safe on-site transport of spent nuclear fuel must rely on the structural integrity of the transport container and system of transport. Regard for on-site traffic and safe, efficient travel routes are important and manageable with well thought-out planning. Non-manageable incidences, such as flying debris from tornado force winds or postulated blasts in proximity to the transport container, that may result in high velocity impact and shock loading on the transport system must be considered. This paper consists of simulations that consider these types of postulated accident scenarios using detailed nonlinear finite element techniques

On-Site or Off-Site Renewable Energy Supply Options?

DEFF Research Database (Denmark)

Marszal, Anna Joanna; Heiselberg, Per; Jensen, Rasmus Lund

2012-01-01

The concept of a Net Zero Energy Building (Net ZEB) encompasses two options of supplying renewable energy, which can offset energy use of a building, in particular on-site or off-site renewable energy supply. Currently, the on-site options are much more popular than the off-site; however, taking...... into consideration the limited area of roof and/or façade, primarily in the dense city areas, the Danish weather conditions, the growing interest and number of wind turbine co-ops, the off-site renewable energy supply options could become a meaningful solution for reaching ‘zero’ energy goal in the Danish context...... five technologies, i.e., two on-site options: (1) photovoltaic, (2) micro combined heat and power, and three off-site options: (1) off-site windmill, (2) share of a windmill farm and (3) purchase of green energy from the 100% renewable utility grid. The results indicate that in case of the on...

The actual technological progress of NPPs

International Nuclear Information System (INIS)

Florescu, Gheorghe; Popa, Adrian; Panaitescu, Valeriu

2010-01-01

The actual nuclear R and D issues require new technologies and continuous progress in order to find adequate and effective solutions in sustained and increasing energy demand. The current tendency in energy consumption and occurring of large consumers, especially from Asian countries, imposes finding new means for energy clean, large scale and sustained production. NPPs reliability and availability were permanently monitored and improved; in the mean time the safety of the nuclear energy production was under surveillance. Corresponding development of the new technologies and discovery of improved materials and adequate technological processes offers the possibilities for appropriate implementation and use of them in the NPPs systems configuration and functioning/operation. The modern technologies and scientific discoveries, also the international cooperation, offer the opportunities to brake the actual barriers in order to cumulate and use advanced energy production processes in finding new energy sources and to build improved, reliable and safety power plants. The monitoring systems, intelligent sensors and intelligent SSCs, nanotechnologies and and modern and intelligent materials constitute the main reasons in improvement of the NPPs systems configuration and processes. The paper presents: - The state of the art in the level of actual and useful technologies for nuclear power systems development; - The actual technological limits that need to be over passed for NPPs systems improvements; - The main systems that need improvement and reconfiguration for actual NPPs development and increase in efficient operation, appropriate availability and total safety; - The actual energy production issues; - The key arguments in sustaining the R and D new NPPs systems development; - Future trends in NPPs development; - The limitations in industrial processes knowledge and use. Appropriate R and D in the field of NPPs systems has a specific characteristic that is highlighted in

AP1000{sup TM} plant modularization

Energy Technology Data Exchange (ETDEWEB)

Cantarero L, C.; Demetri, K. J. [Westinghouse Electric Co., 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States); Quintero C, F. P., E-mail: cantarc@westinghouse.com [Westinghouse Electric Spain, Padilla 17, 28006 Madrid (Spain)

2016-09-15

The AP1000{sup TM} plant is an 1100 M We pressurized water reactor (PWR) with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance and safety. Modules are used extensively in the design of the AP1000 plant nuclear island. The AP1000 plant uses modern, modular-construction techniques for plant construction. The design incorporates vendor-designed skids and equipment packages, as well as large, multi-ton structural modules and special equipment modules. Modularization allows traditionally sequential construction tasks to be completed simultaneously. Factory-built modules can be installed at the site in a planned construction schedule. The modularized AP1000 plant allows many more construction activities to proceed in parallel. This reduces plant construction calendar time, thus lowering the costs of plant financing. Furthermore, performing less work onsite significantly reduces the amount of skilled field-craft labor, which costs more than shop labor. In addition to labor cost savings, doing more welding and fabrication in a factory environment raises the quality of work, allowing more scheduling flexibility and reducing the amount of specialized tools required onsite. The site layout for the AP1000 plant has been established to support modular construction and efficient operations during construction. The plant layout is compact, using less space than previous conventional plant layouts. This paper provides and overview of the AP1000 plant modules with an emphasis on structural modules. Currently the Westinghouse AP1000 plant has four units under construction in China and four units under construction in the United States. All have shown successful fabrication and installation of various AP1000 plant modules. (Author)

AP1000"T"M plant modularization

International Nuclear Information System (INIS)

Cantarero L, C.; Demetri, K. J.; Quintero C, F. P.

2016-09-01

The AP1000"T"M plant is an 1100 M We pressurized water reactor (PWR) with passive safety features and extensive plant simplifications that enhance construction, operation, maintenance and safety. Modules are used extensively in the design of the AP1000 plant nuclear island. The AP1000 plant uses modern, modular-construction techniques for plant construction. The design incorporates vendor-designed skids and equipment packages, as well as large, multi-ton structural modules and special equipment modules. Modularization allows traditionally sequential construction tasks to be completed simultaneously. Factory-built modules can be installed at the site in a planned construction schedule. The modularized AP1000 plant allows many more construction activities to proceed in parallel. This reduces plant construction calendar time, thus lowering the costs of plant financing. Furthermore, performing less work onsite significantly reduces the amount of skilled field-craft labor, which costs more than shop labor. In addition to labor cost savings, doing more welding and fabrication in a factory environment raises the quality of work, allowing more scheduling flexibility and reducing the amount of specialized tools required onsite. The site layout for the AP1000 plant has been established to support modular construction and efficient operations during construction. The plant layout is compact, using less space than previous conventional plant layouts. This paper provides and overview of the AP1000 plant modules with an emphasis on structural modules. Currently the Westinghouse AP1000 plant has four units under construction in China and four units under construction in the United States. All have shown successful fabrication and installation of various AP1000 plant modules. (Author)

The development of an on-site container

International Nuclear Information System (INIS)

Glass, R.E.; McAllaster, M.E.; Jones, P.L.; McKinney, A.L.

1992-01-01

Sandia National Laboratories (SNL) has developed a package for the on-site transport of chemical munitions for the US Army. This package was designed to prevent the release of lethal quantities of chemical agents during transportation of munitions to the demilitarization facilities on-site. The packaging prevents auto-ignition of the munitions by limiting the thermal and structural assault on the munitions during an accident. This package, with some modifications to account for contents, may be suitable for the on-site transport of mixed wastes at United States Department of Energy facilities. This paper discusses the design and verification testing of the package. The safety criteria for the package were modeled after the International Atomic Energy Agency (IAEA) hypothetical accident sequence and modified to take credit for operational controls. The modified accident sequence consisted of drop, puncture, and thermal events. The post-accident leak rate was established to prevent harm to an exposed worker. The packaging has a mass of 8600 kg and can accommodate up to 3600 kg of contents. The interior of the package is 188 cm in diameter and 232 cm long. Two sample ports can be used to sample the interior of the package prior to opening the closure and an o-ring test port can be used to determine the leak rates prior to and after transport

Continuous feed, on-site composting of kitchen garbage.

Science.gov (United States)

Hwang, Eung-Ju; Shin, Hang-Sik; Tay, Joo-Hwa

2002-04-01

Kitchen garbage generated at a school cafeteria was treated and stabilised in a controlled on-site composting unit for volume reduction and on-site utilisation of processed garbage. The on-site composter was fed with the garbage on a daily basis during the two-months experimental period. Compost was not removed from the unit but was entirely reused as a bulking agent in order to minimise the need for additional bulking agent and compost handling. Performance of the composter tinder this condition was investigated. Most of the easily degradable organic matter (EDM) in the garbage was biodegraded rapidly, and the final product had a low content of EDM. Lipids, total sugar, and hemi-cellulose were degraded 96%, 81%, and 66% respectively. Free air space (FAS) was higher than 0.5 all the time, so accumulation of dry matter in the unit was not significant in reducing reaction efficiency. Other reaction parameters such as pH and MC were kept within a suitable range; however, it was advisable to maintain MC at over 46%. As a result, this method of operation was able to stabilise the garbage with low sawdust demand and little compost production.

Views on nuclear power plant control and instrumentation activities in Sweden

International Nuclear Information System (INIS)

Blomberg, P.E.

1986-01-01

The purpose of this presentation is to provide a summary of the activities concerning human errors in test and maintenance in nuclear power plants, implementation of the advanced information technology and expanded use of on-site conceptual plant simulators in Sweden

On-Site Renewable Energy and Green Buildings: A System-Level Analysis.

Science.gov (United States)

Al-Ghamdi, Sami G; Bilec, Melissa M

2016-05-03

Adopting a green building rating system (GBRSs) that strongly considers use of renewable energy can have important environmental consequences, particularly in developing countries. In this paper, we studied on-site renewable energy and GBRSs at the system level to explore potential benefits and challenges. While we have focused on GBRSs, the findings can offer additional insight for renewable incentives across sectors. An energy model was built for 25 sites to compute the potential solar and wind power production on-site and available within the building footprint and regional climate. A life-cycle approach and cost analysis were then completed to analyze the environmental and economic impacts. Environmental impacts of renewable energy varied dramatically between sites, in some cases, the environmental benefits were limited despite the significant economic burden of those renewable systems on-site and vice versa. Our recommendation for GBRSs, and broader policies and regulations, is to require buildings with higher environmental impacts to achieve higher levels of energy performance and on-site renewable energy utilization, instead of fixed percentages.

Training Artisans On-Site

Directory of Open Access Journals (Sweden)

Edoghogho Ogbeifun

2011-09-01

Full Text Available The decline in apprenticeship in both the public and private sectors, the increasing use of sub-contractors as well as the uncoordinated approach in the informal sector are contributing factors to the shortage of skilled artisans in the construction industry. Artisans training can be introduced and implemented through the adoption of progressive implementation of construction processes commencing work from areas requiring low skill demands to areas of high skill demand. The success of this principle hinges on the collaborative effort of the key project stakeholders. The client should be willing to absorb extra cost and delays in the project; the design and contract documentation should facilitate on-site training, and  the consultant actively guide the contractor and the construction processes to achieve the training objectives. The exploratory research method was adopted in this study and research revealed that this principle was used in a project in the UK and in the development of infrastructure in the tourism industry of South Africa .It is being recommended that the principle be adapted by the public sector for the development of small size infrastructures that can be repeated in many places. This will boost the quality and quantity of artisans, enhance employability, reduce rural urban migration and alleviate poverty.Keywords: Skilled artisans, on-site training, progressive construction processes, project stakeholders, contract documentation. 

Modification of an existing radwaste facility to provide onsite low level waste storage

International Nuclear Information System (INIS)

Ault, G.M.; Reiss, J.F.; Commonwealth Edison Co., Chicago, IL)

1985-01-01

The decision of whether or not to install onsite storage capacity for low-level radioactive waste is dictated by individual utility circumstances. Commonwealth Edison has decided to construct facilities to store low-level radwaste onsite at each of their four operating nuclear stations, and they plan to have those facilities in operation by January, 1986. At Dresden, that onsite storage capacity is being provided by modifying an existing radwaste building which already has installed a remotely-operated precision-placement type crane. The purposes of this paper are to describe: (1) how Commonwealth Edison arrived at the decision to construct onsite storage facilities as a hedge against possible disruption of burial site availability in January, 1986; (2) why the desire to minimize the capital investment for this protection led to selection of an uncomplicated design for their ''standard'' facility and to the decision to modify an existing building at Dresden rather than construct a new one; and (3) what is being done to adapt the Dresden 1 Decontamination/Radwaste Building for extended onsite storage

Assessment of On-Site Power Opportunities in the Industrial Sector; TOPICAL

International Nuclear Information System (INIS)

Bryson, T.

2001-01-01

The purpose of this report is to identify the potential for on-site power generation in the U.S. industrial sector with emphasis on nine industrial groups called the ''Industries of the Future'' (IOFs) by the U.S. Department of Energy (DOE). Through its Office of Industrial Technologies (OIT), the DOE has teamed with the IOFs to develop collaborative strategies for improving productivity, global competitiveness, energy usage and environmental performance. Total purchases for electricity and steam for the IOFs are in excess of$27 billion annually. Energy-related costs are very significant for these industries. The nine industrial groups are: (1) Agriculture (SIC 1); (2) Forest products; (3) Lumber and wood products (SIC 24); (4) Paper and allied products (SIC 26); (5) Mining (SIC 11, 12, 14); (6) Glass (SIC 32); (7) Petroleum (SIC 29); (8) Chemicals (SIC 28); and (9) Metals (SIC 33)-Steel, Aluminum, Metal casting. Although not currently part of the IOF program, the food industry is included in this report because of its close relationship to the agricultural industry and its success with on-site power generation. On-site generation provides an alternative means to reduce energy costs, comply with environmental regulations, and ensure a reliable power supply. On-site generation can ease congestion in the local utility's electric grid. Electric market restructuring is exacerbating the price premium for peak electricity use and for reliability, creating considerable market interest in on-site generation

Comparison of central adjudication of outcomes and onsite outcome assessment on treatment effect estimates

DEFF Research Database (Denmark)

Ndounga Diakou, Lee A ymar; Trinquart, Ludovic; Hróbjartsson, Asbjørn

2016-01-01

) when AC assessed events identified independently from unblinded onsite assessors; and 1.11 (95% CI 0.96 to 1.27, I(2) = 0%, 10 RCTs) when AC assessed events identified by unblinded onsite assessors. However, there was a statistically significant interaction between these subgroups (P = 0.03) AUTHORS......, there was no difference in treatment effect estimates from onsite assessors and AC (combined ROR: 1.00, 95% confidence interval (CI) 0.97 to 1.04; I(2) = 0%, 47 RCTs). The combined ROR was 1.00 (95% CI 0.96 to 1.04; I(2) = 0%, 35 RCTs) when onsite assessors were blinded; 0.76 (95% CI 0.48 to 1.12, I(2) = 0%, two RCTs...

On-site phytoremediation applicability assessment in Alur Ilmu, Universiti Kebangsaan Malaysia based on spatial and pollution removal analyses.

Science.gov (United States)

Mahmud, Mohd Hafiyyan; Lee, Khai Ern; Goh, Thian Lai

2017-10-01

The present paper aims to assess the phytoremediation performance based on pollution removal efficiency of the highly polluted region of Alur Ilmu urban river for its applicability of on-site treatment. Thirteen stations along Alur Ilmu were selected to produce thematic maps through spatial distribution analysis based on six water quality parameters of Malaysia's Water Quality Index (WQI) for dry and raining seasons. The maps generated were used to identify the highly polluted region for phytoremediation applicability assessment. Four free-floating plants were tested in treating water samples from the highly polluted region under three different conditions, namely controlled, aerated and normal treatments. The selected free-floating plants were water hyacinth (Eichhornia crassipes), water lettuce (Pistia stratiotes), rose water lettuce (Pistia sp.) and pennywort (Centella asiatica). The results showed that Alur Ilmu was more polluted during dry season compared to raining season based on the water quality analysis. During dry season, four parameters were marked as polluted along Alur Ilmu, namely dissolve oxygen (DO), 4.72 mg/L (class III); ammoniacal nitrogen (NH 3 -N), 0.85 mg/L (class IV); total suspended solid (TSS), 402 mg/L (class V) and biological oxygen demand (BOD), 3.89 mg/L (class III), whereas, two parameters were classed as polluted during raining season, namely total suspended solid (TSS), 571 mg/L (class V) and biological oxygen demand (BOD), 4.01 mg/L (class III). The thematic maps generated from spatial distribution analysis using Kriging gridding method showed that the highly polluted region was recorded at station AL 5. Hence, water samples were taken from this station for pollution removal analysis. All the free-floating plants were able to reduce TSS and COD in less than 14 days. However, water hyacinth showed the least detrimental effect from the phytoremediation process compared to other free-floating plants, thus made it a suitable

Design considerations for on-site spent-fuel transfer systems

International Nuclear Information System (INIS)

Jones, R.H.; Jones, C.R.

1989-06-01

Studies on spent fuel shipping logistics and operation make it clear that the use of large casks, i.e., 100--125 tons, is superior to smaller casks of similar construction. This superiority manifests itself in both transportation and/or shipping economics and safety as well as reduced personnel exposure in the processing of the casks. An on-site system for the transfer of spent fuel from the storage pool to a large shipping or storage cask, as well as the transfer of spent fuel directly from a storage cask to a shipping cask, could bring the large cask benefits to those restricted reactors. Sensing the need to look more closely at this opportunity, EPRI contracted with S. Levy, Incorporated of Campbell, CA to develop a set of design considerations for such transfer systems. Rather then embark on another design study, EPRI decided to first identify the system considerations that must be factored into any design. The format for this effort presents both the Consideration and the Rationale for the consideration. The resulting work identified thirty-six General Considerations and two Special Considerations. The Considerations are in the form of mandatory requirements and desirable but nonmandatory requirements. Additionally, a brief economic study was performed to get a feel for the cost considerations of on-site transfers. The study results suggest a relatively narrow set of scenarios where on-site transfers are economically superior to alternatives. These scenarios generally involve the use of concrete casks as on-site storage devices

A comparison of the suitability of different willow varieties to treat on-site wastewater effluent in an Irish climate.

Science.gov (United States)

Curneen, S J; Gill, L W

2014-01-15

Short rotation coppiced willow trees can be used to treat on-site wastewater effluent with the advantage that, if planted in a sealed basin and sized correctly, they produce no effluent discharge. This paper has investigated the evapotranspiration rate of four different willow varieties while also monitoring the effects of three different effluent types on each variety. The willow varieties used are all cultivars of Salix viminalis. The effluents applied were primary (septic tank) effluent, secondary treated effluent and rain water (control). The results obtained showed that the addition of effluent had a positive effect on the evapotranspiration. The willows were also found to uptake a high proportion of the nitrogen and phosphorus from the primary and secondary treated effluents added during the first year. The effect of the different effluents on the evapotranspiration rate has been used to design ten full scale on-site treatment systems which are now being monitored. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Donald C. Cook Nuclear Plant's experience with on-site storage

International Nuclear Information System (INIS)

MacRae, W.T.

1993-01-01

The Donald C. Cook nuclear plant is located in Bridgman, Michigan. As such, no low-level radioactive waste from the facility has been sent to burial since November 1990. The only option is storage. The plant is well prepared for storage. A new facility was built, so the plant now has >2265 M3 (80 000 ft 3 ) of storage capacity. There are a number of issues that have had to be addressed during the period of storage. These items include storage capacity and waste generation rates, the waste form and the packages used, and the regulatory issues

Safety analysis report for packaging (onsite) Castor GSF cask

International Nuclear Information System (INIS)

Clements, E.P.

1997-01-01

The CASTOR GSF packaging was designed and fabricated to be a certified Type B(U) packaging and comply with the requirements of the International Atomic Energy Agency (IAEA) for transport of up to five sealed canisters of vitrified radioactive materials. This onsite Safety Analysis Report for Packaging (SARP) provides the analysis and evaluations necessary to demonstrate that the casks, with the canister payload, meet the intent of the Type B packaging regulations set forth in 10 CFR 71 and therefore meet the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping

76 FR 19466 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable...

Science.gov (United States)

2011-04-07

... Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable Staffing, and Third Dimension Waverly, OH; Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network... Group including on-site leased workers from Reserves Network, Jackson, Ohio. The workers produce...

77 FR 40638 - Syniverse Technologies, Inc., Including On-Site Leased Workers From Insight Global Stone Staffing...

Science.gov (United States)

2012-07-10

..., Inc., Including On-Site Leased Workers From Insight Global Stone Staffing, and Randstad Formerly Known..., Massachusetts, including on-site leased workers from Insight Global, Stone Staffing, Randstad formerly known as... Insight Global, Stone Staffing, Randstad, formerly known as Sapphire Technologies, were employed on-site...

Small Reactors without On-site Refuelling: Neutronic Characteristics, Emergency Planning and Development Scenarios. Final Report of an IAEA Coordinated Research Project

International Nuclear Information System (INIS)

2010-09-01

Small reactors without on-site refuelling have a capability to operate without reloading or shuffling of fuel in their cores for reasonably long periods of time consistent with plant economy and considerations of energy security, with no fresh or spent fuel being stored at the site during reactor operation. In 2009, more than 25 design concepts of such reactors were analyzed or developed in IAEA Member States, representing both developed and developing countries. Small reactors without on-site refuelling are being developed for several reactor lines, including water cooled reactors, sodium cooled fast reactors, lead and lead bismuth cooled reactors, and also include some non-conventional concepts. Most of the concepts of small reactors without on-site refuelling reactors are at early design stages. To make such reactors viable, further research and development (R and D) is necessary, inter alia, to validate long-life core operation, define and validate new robust types of fuel, justify an option of plant location in the proximity to its users, and examine possible niches that such reactors could fill in future energy systems. To further research and development (R and D) in the areas mentioned above and several others, and to facilitate progress in Member States in design and technology development for small reactors without on-site refueling, the IAEA has conducted a dedicated Coordinated Research Project (CRP) entitled 'Small Reactors without On-site Refuelling' (CRPi25001). The project started late in 2004 and, after a review in 2008, was extended for one more year to be ended in 2009. The project has created a network of 18 research institutions from 10 Member States, representing both developed and developing countries. Over the CRP period, collaborative results were achieved for many of the abovementioned research areas. Some studies highlighted new directions of research to be furthered after the CRP completion. Some studies remained the efforts of

Operating experience relating to on-site electric power sources. Proceedings of a Specialist Meeting

International Nuclear Information System (INIS)

1986-02-01

The reliability of on-site electric power sources of nuclear power plants usually consisting of diesel generators, gas turbine generators and DC power sources, has been a matter of concern during reactor operations. The frequent recurrence and the important consequences of failures relating to on-site electric power sources have led to a general consensus that they form one of the most significant features influencing the total performance of the safety Systems. This has also been confirmed by surveys performed on the incidents reported through the NEA Incident Reporting System (IRS). Accordingly, a recommendation to organise a Specialist Meeting on the subject was made at the third annual meeting of CSNI Principal Working Group No. 1 (Operating Experience and Human Factors). At the 12. meeting of the CSNI held in November 1984. the Committee endorsed the proposal and accepted an offer by the United Kingdom to host and organise the Specialist Meeting. The Specialist Meeting, sponsored by the CSNI, was held in London, United Kingdom from 16 to 18 October 1985. It was hosted by H.M. Nuclear Installations Inspectorate of the Health and Safety Executive. The purpose of the meeting was to promote the exchange of Information on operating experience relating to on-site electric power sources and to look for measures to further improve their reliability In the areas of design, operation and licensing. The meeting was organised by a Programme Group which included nominated members of CSNI PWG No. 1. the Programme Group met in May and June 1985 in Paris to agree on the programme and practical arrangements for the meeting. As a result of the review of the abstracts which had been contributed in response to the Call for Papers, 28 papers were accepted for presentation during the meeting. Approximately 60 delegates from 13 Member countries, and the NEA Secretariat, attended the meeting. Session summaries prepared by the respective session chairmen are Included prior to the

Operating experience relating to on-site electric power sources. Proceedings of a Specialist Meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-02-15

The reliability of on-site electric power sources of nuclear power plants usually consisting of diesel generators, gas turbine generators and DC power sources, has been a matter of concern during reactor operations. The frequent recurrence and the important consequences of failures relating to on-site electric power sources have led to a general consensus that they form one of the most significant features influencing the total performance of the safety Systems. This has also been confirmed by surveys performed on the incidents reported through the NEA Incident Reporting System (IRS). Accordingly, a recommendation to organise a Specialist Meeting on the subject was made at the third annual meeting of CSNI Principal Working Group No. 1 (Operating Experience and Human Factors). At the 12. meeting of the CSNI held in November 1984. the Committee endorsed the proposal and accepted an offer by the United Kingdom to host and organise the Specialist Meeting. The Specialist Meeting, sponsored by the CSNI, was held in London, United Kingdom from 16 to 18 October 1985. It was hosted by H.M. Nuclear Installations Inspectorate of the Health and Safety Executive. The purpose of the meeting was to promote the exchange of Information on operating experience relating to on-site electric power sources and to look for measures to further improve their reliability In the areas of design, operation and licensing. The meeting was organised by a Programme Group which included nominated members of CSNI PWG No. 1. the Programme Group met in May and June 1985 in Paris to agree on the programme and practical arrangements for the meeting. As a result of the review of the abstracts which had been contributed in response to the Call for Papers, 28 papers were accepted for presentation during the meeting. Approximately 60 delegates from 13 Member countries, and the NEA Secretariat, attended the meeting. Session summaries prepared by the respective session chairmen are Included prior to the

Spray pond design for nuclear power plants

International Nuclear Information System (INIS)

Codell, R.B.; Asce, A.M.

1986-01-01

This paper presents a complex methodology for assessing the performance of spray ponds in ultimate heat sink service at nuclear power plants. A spray pond performance model, developed in the companion paper, is used in conjunction with on-site and off-site meteorological data to predict the highest temperature and greatest 30 day water loss which can reasonable be expected to occur during the lifetime of the plant. The performance model for heat and mass transfer is used to develop an efficient phenomenological model used to scan the long-term meteorological records. Refined estimates of temperature or water loss may then be based on more complicated models if necessary. Short-term onsite data are correlated to the long-term off-site data to formulate correction factors for the difference in location. Cumulative distribution functions for temperature and water loss are determined from the long-term meteorological records to predict the occurrence of these quantities which are less severe that the peak. The methodology is demonstrated using data and parameters from the Palo Verde nuclear plant as an example

Perry Nuclear Plant's Plans for on-site storage

International Nuclear Information System (INIS)

Ratchen, J.T.

1993-01-01

Because of current radwaste disposal legislation and the eventual denial of access to the Barnwell, Richland, and Beatty burial sites, it was imperative for the Perry nuclear power plant to develop alternative means for handling its generated radioactive waste. The previous radwaste facilities at Perry were developed for processing, packaging, short-term storage, and shipment for burial. In order to meet the changing needs, new facilities have been constructed to handle the processing, packaging, and 5-yr interim storage of both dry active waste (DAW) and dewatered or solidified resin, filter media, etc

Achievement report for fiscal 1981 on Sunshine Program-assisted project. Data 5. Development of coal liquefaction technology/Development of solvent extraction liquefaction technology/Development of brown coal solvent extraction plant (Development of 50t/d pilot plant); 1981 nendo sekitan ekika gijutsu no kaihatsu seika hokokusho (shiryo 5). Yozai chushutsu ekika gijutsu no kaihatsu (kattankei yozai chushutsu plant no kaihatsu (50ton/nichi pilot plant no kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Research is conducted for the development of a liquefaction plant (50t/d pilot plant) for Australia's Victorian brown coal. In fiscal 1981, using the process concept and design data obtained through the study of elementary matters, a detailed design of a primary hydrogenation system is drawn, part of the equipment is procured, and on-site construction work is started. The book is a collection of materials which include engineering specifications related to electrical designs, lists of electrical items, specifications related to civil engineering designs, drawings such as planning drawings, and a detailed construction design drawn by an Australian engineering corporation and related documents and drawings. Concerning the manufacture of mechanical systems, items procurable in Japan, specifications of items procurable in Australia, lists, drawings, etc., are shown. Also included are the details of on-site preparation for construction and on-site work, conceptual designs of processes of dehydration, deashing, and secondary hydrogenation, etc. (NEDO)

Achievement report for fiscal 1981 on Sunshine Program-assisted project. Data 5. Development of coal liquefaction technology/Development of solvent extraction liquefaction technology/Development of brown coal solvent extraction plant (Development of 50t/d pilot plant); 1981 nendo sekitan ekika gijutsu no kaihatsu seika hokokusho (shiryo 5). Yozai chushutsu ekika gijutsu no kaihatsu (kattankei yozai chushutsu plant no kaihatsu (50ton/nichi pilot plant no kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Research is conducted for the development of a liquefaction plant (50t/d pilot plant) for Australia's Victorian brown coal. In fiscal 1981, using the process concept and design data obtained through the study of elementary matters, a detailed design of a primary hydrogenation system is drawn, part of the equipment is procured, and on-site construction work is started. The book is a collection of materials which include engineering specifications related to electrical designs, lists of electrical items, specifications related to civil engineering designs, drawings such as planning drawings, and a detailed construction design drawn by an Australian engineering corporation and related documents and drawings. Concerning the manufacture of mechanical systems, items procurable in Japan, specifications of items procurable in Australia, lists, drawings, etc., are shown. Also included are the details of on-site preparation for construction and on-site work, conceptual designs of processes of dehydration, deashing, and secondary hydrogenation, etc. (NEDO)

Evaluation of the OnSite malaria rapid test performance in Miandrivazo, Madagascar.

Science.gov (United States)

Ravaoarisoa, E; Andriamiandranoro, T; Raherinjafy, R; Jahevitra, M; Razanatsiorimalala, S; Andrianaranjaka, V; Randrianarivelojosia, M

2017-10-01

The performance of the malaria rapid diagnostic test OnSite-for detecting pan specific pLDH and Plasmodium falciparum specific HRP2 - was assessed during the malaria transmission peak period in Miandrivazo, in the southwestern part of Madagascar from April 20 to May 6, 2010. At the laboratory, the quality control OnSite Malaria Rapid Test according to the WHO/TDR/FIND method demonstrated that the test had good sensitivity. Of the 218 OnSite tests performed at the Miandrivazo Primary Health Center on patients with fever or a recent history of fever, four (1.8%, 95% CI: 0.6-4.9%) were invalid. Ninety four (43,1%) cases of malaria were confirmed by microscopy, of which 90 were P. falciparum malaria and 4 Plasmodium vivax malaria. With a Cohen's kappa coefficient of 0.94, the agreement between microscopy and OnSite is excellent. Compared with the rapid test CareStart™ commonly used within the public health structures in Madagascar, the sensitivity and specificity of the OnSite test were 97.9% and 96.8%.

Effects of Edge on-Site Potential in a Honeycomb Topological Magnon Insulator

Science.gov (United States)

Pantaleón, Pierre A.; Xian, Yang

2018-06-01

While the deviation of the edge on-site potential from the bulk values in a magnonic topological honeycomb lattice leads to the formation of edge states in a bearded boundary, this is not the case for a zigzag termination, where no edge state is found. In a semi-infinite lattice, the intrinsic on-site interactions along the boundary sites generate an effective defect and this gives rise to Tamm-like edge states. If a nontrivial gap is induced, both Tamm-like and topologically protected edge states appear in the band structure. The effective defect can be strengthened by an external on-site potential, and the dispersion relation, velocity and magnon density of the edge states all become tunable.

77 FR 32628 - Columbia Gas Transmission, LLC; Notice of Environmental Onsite Review

Science.gov (United States)

2012-06-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PF12-6-000] Columbia Gas Transmission, LLC; Notice of Environmental Onsite Review On June 13 and 14, 2012, the Office of Energy Projects (OEP) staff will conduct site visits of the proposed Line MB Loop Extension Project. The purpose of the onsite review is to review...

Accidental Release of Chlorine from a Storage Facility and an On-Site Emergency Mock Drill: A Case Study

Directory of Open Access Journals (Sweden)

Ambalathumpara Raman Soman

2015-01-01

Full Text Available In the current industrial scenario there is a serious need for formulating strategies to handle hazardous substances in the safest way. Manufacture, storage, and use of hazardous substances pose a serious risk to industry, people, and the environment. Accidental release of toxic chemicals can lead to emergencies. An emergency response plan (ERP is inevitable to minimize the adverse effects of such releases. The on-site emergency plan is an integral component of any process safety and risk management system. This paper deals with an on-site emergency response plan for a chlorine manufacturing industry. It was developed on the basis of a previous study on chlorine release and a full scale mock drill has been conducted for testing the plan. Results indicated that properly trained personnel can effectively handle each level of incidents occurring in the process plant. As an extensive guideline to the district level government authorities for off-site emergency planning, risk zone has also been estimated with reference to a chlorine exposure threshold of 3 ppm.

Dissolution studies with pilot plant and actual INTEC calcines

International Nuclear Information System (INIS)

Herbst, R.S.; Garn, T.G.

1999-01-01

The dissolution of Idaho Nuclear Technology and Engineering Center (INTEC) pilot plant calcines was examined to determine solubility of calcine matrix components in acidic media. Two representatives pilot plant calcine types were studied: Zirconia calcine and Zirconia/Sodium calcine. Dissolution of these calcines was evaluated using lower initial concentrations of nitric acid than used in previous tests to decrease the [H+] concentration in the final solutions. Lower [H+] concentrations contribute to more favorable TRUEX/SREX solvent extraction flowsheet performance. Dissolution and analytical results were also obtained for radioactive calcines produced using high sodium feeds blended with non-radioactive Al(NO 3 ) 3 solutions to dilute the sodium concentration and prevent bed agglomeration during the calcination process. Dissolution tests indicated >95 wt.% of the initial calcine mass can be dissolved using the baseline dissolution procedure, with the exception that higher initial nitric acid concentrations are required. The higher initial acid concentration is required for stoichiometric dissolution of the oxides, primarily aluminum oxide. Statistically designed experiments using pilot plant calcine were performed to determine the effect of mixing rate on dissolution efficiency. Mixing rate was determined to provide minimal effects on wt.% dissolution. The acid/calcine ratio and temperature were the predominate variables affecting the wt.% dissolution, a result consistent with previous studies using other similar types of pilot plant calcines

Nutrition Program Quality Assurance through a Formalized Process of On-Site Program Review

Science.gov (United States)

Paddock, Joan Doyle; Dollahite, Jamie

2012-01-01

A protocol for a systematic onsite review of the Expanded Food and Nutrition Education Program and Supplemental Nutrition Assistance Program-Education was developed to support quality programming and ensure compliance with state guidelines and federal regulations. Onsite review of local nutrition program operations is one strategy to meet this…

Pollution abatement with peat onsite wastewater treatment systems

Energy Technology Data Exchange (ETDEWEB)

Brooks, J L [University of Maine, Orano, ME (United States). Dept. of Civil Engineering

1994-02-01

The purpose of onsite wastewater treatment is to provide economical removal of dissolved nutrients, pathogens and other contaminates from septic tank effluent to avoid the pollution of groundwater or creation of other health hazards. The effective use of conventional soil adsorption systems is limited by a number of factors including site characteristics, soil type and condition, and the proximity of the system to surface waters or a source of potable water. On adverse sites, where the use of conventional subsurface soil adsorption systems does not provide acceptable levels of treatment, Sphagnum peat may be used as an economical method of onsite wastewater treatment. The peat system, when properly designed and constructed, is relatively simple to install, requires minimal energy and maintenance, and provides a high quality effluent without additional disinfection. 19 refs.

The development of an on-site container

International Nuclear Information System (INIS)

Glass, R.E.; McAllaster, M.E.; Jones, P.L.; McKinney, A.L.

1993-01-01

This paper describes the results of the development of a packaging designed for on-site transportation of chemical munitions. The criteria for the package were patterned after the requirements for Type B packagings, but were modified to take credit for the operational controls that could be applied on-site. The design phase has been completed and a contract has been placed for fabrication of 165 units. In addition to the tests completed during the design phase, a complete sequence of verification tests will be performed on the first fleet unit. This sequence will consist of: (1) a 22,700-kg load placed on the packaging for 24 hours, (2) the flat side free drop, (3) the center-of-gravity over closure joint puncture test, and (4) a 15-min all-engulfing JP-4 pool-fire test. At the completion of the test sequence, the package will be required to meet the less than 1 x 10 -1 std cc/s leak test. (J.P.N.)

77 FR 29362 - Kohler Company, Malvern Division, Including On-Site Leased Workers From Manpower Staffing and Dow...

Science.gov (United States)

2012-05-17

... Division, Including On-Site Leased Workers From Manpower Staffing and Dow Cleaning Services, Malvern, AR..., and components. The company reports that workers from Dow Cleaning Services were employed on-site at... leased from Dow Cleaning Services working on-site at the Malvern, Arkansas location of Kohler Company...

75 FR 26793 - Beam Global Spirits & Wine, Including On-Site Leased Workers from Adecco, St. Elizabeth Business...

Science.gov (United States)

2010-05-12

... & Wine, Including On-Site Leased Workers from Adecco, St. Elizabeth Business Health, Guardsmark, and Lab... 26, 2010, applicable to workers of Beam Global Spirits & Wine, including on-site leased workers from... on-site at the Cincinnati, Ohio location of Beam Global Spirits & Wine. The Department has determined...

Effluent information system (EIS)/onsite discharge information system (ODIS) 1985 executive summary

International Nuclear Information System (INIS)

Watanabe, T.

1986-09-01

The Effluent Information System (EIS) and Onsite Discharge Information System (ODIS) are Department of Energy (DOE) data base systems that aid DOE-Headquarters and Field Offices in managing the radioactive air and liquid effluents from DOE facilities. Data on effluents released offsite are entered into EIS and data on effluents discharged onsite and retained onsite are entered into ODIS. This document is a summary of information obtained from the CY 1985 effluent data received from all DOE and DOE contractor facilities and entered in the data bases. Data from previous years are also included. The summary consists of two parts. The first part summarizes information for effluents released offsite, and the second part summarizes information for effluents retained onsite. These summaries are taken from the routine annual reports sent to each DOE Operations Office. Special tabulations or specific data can be supplied upon request. Explanations of the significant changes are included in the EIS and ODIS graphic sections. Only those changes in activity greater than a factor of two and having a magnitude greater than 0.1 Ci are considered significant and are addressed in the explanation

Superconducting correlations in the one-band Hubbard model with intermediate on-site and weak attractive intersite interactions

International Nuclear Information System (INIS)

Jain, K.P.; Ramakumar, R.; Chancey, C.C.

1990-01-01

In this paper, we analyze a simple extended Hubbard model with an intermediate on-site interaction (both repulsive and attractive) and a weak intersite attractive interaction. Following Hubbard decoupling approximations and introducing Hubbard subband operators, we obtain a generalized gap function for singlet s-wave pairing that explicitly depends on the Hubbard subband energies. For the on-site repulsive-interaction case, we find that the superconductivity is not destroyed in the intermediate-interaction regime, contrary to the prediction of a Hartree-Fock mean-field treatment. The essential consequence of the on-site repulsion is the formation of the Hubbard subbands separated by the Mott-Hubbard gap, and it is within these subbands that pairing induced by the intersite interaction occurs. For the attractive on-site interaction case, the on-site pairing amplitude is found to be proportional to the bandwidth, and the gap function has contributions from both on-site and intersite pairing. The relevance of the model to high-temperature superconductivity is discussed

Probabilistic Risk Assessment of Cask Drop Accident during On-site Spent Nuclear Fuel Transportation

Energy Technology Data Exchange (ETDEWEB)

Ham, Jae Hyun; Christian, Robby; Momani, Belal Al; Kang, Hyun Gook [KAERI, Daejeon (Korea, Republic of)

2016-05-15

There are two ways to transfer the SNF from a site to other site, one is land transportation and the other is maritime transportation. Maritime transportation might be used because this way uses more safe route which is far from populated area. The whole transportation process can be divided in two parts: transferring the SNF between SNP and wharf in-Nuclear Power Plant (NPP) site by truck, and transferring the SNF from the wharf to the other wharf by ship. In this research, on-site SNF transportation between SNP and wharf was considered. Two kinds of single accident can occur during this type of SNF transportation, impact and fire, caused by internal events and external events. In this research, PRA of cask drop accident during onsite SNF transportation was done, risk to a person (mSv/person) from a case with specific conditions was calculated. In every 11 FEM simulation drop cases, FDR is 1 even the fuel assemblies are located inside of the cask. It is a quite larger value for all cases than the results with similar drop condition from the reports which covers the PRA on cask storage system. Because different from previous reports, subsequent impact was considered. Like in figure 8, accelerations which are used to calculate the FDR has extremely higher values in subsequent impact than the first impact for all SNF assemblies.

Application of laser cladding method to small-diameter stainless steel pipes in actual nuclear plant

International Nuclear Information System (INIS)

Atago, Y.; Yamadera, M.; Tsuji, H.; Shiraiwa, T.; Kanno, M.

1995-01-01

Recently, to prevent stress corrosion cracking (SCC) the material of stainless steel (Type 304), a laser cladding method which produces a highly corrosion-resisting coating (cladding) to be formed on the surface of the material was developed. This is applicable to a long distance and narrow space, because of the good accessibility of the YAG (Yttrium-Aluminum Garnet) laser beam that can be transmitted through an optical fiber. In this method, a paste mixed metallic powder and heating resistive organic solvent is firstly placed on the inner surface of a small pipe and then a YAG laser beam transmitted through an optical fiber is irradiated to the paste, which will be melted and formed a clad subsequently, which is excellent in corrosion resistance. Finally, it can be achieved further resistance against the SCC due to the clad layer formed thus on the surface of the material. Recently, this Laser Cladding method was practically and successfully applied to the actual BWR Nuclear Power Plant in Japan. This report introduces the laser cladding technique, the equipments developed for practical application in the field

75 FR 32221 - Whirlpool Corporation, Evansville Division, Including On-Site Leased Workers from Andrews...

Science.gov (United States)

2010-06-07

..., Evansville Division, Including On-Site Leased Workers from Andrews International, Inc., Evansville, IN... that workers leased from Andrews International, Inc. were employed on-site at the Evansville, Indiana... findings, the Department is amending this certification to include leased workers from Andrews...

76 FR 81986 - Honeywell International, Inc., Automation and Control Solutions Division, Including On-Site...

Science.gov (United States)

2011-12-29

..., Inc., Automation and Control Solutions Division, Including On-Site Leased Workers From Manpower...., Automation and Control Solutions Division. The Department has determined that these workers were sufficiently...., Automation and Control Solutions Division, including on-site leased workers from Manpower, Spherion...

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Science.gov (United States)

Carroll, Steven; Goonetilleke, Ashantha; Thomas, Evan; Hargreaves, Megan; Frost, Ray; Dawes, Les

2006-08-01

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.

77 FR 4368 - Abbott Laboratories, Diagnostics Division, Including On-Site Leased Workers From Manpower...

Science.gov (United States)

2012-01-27

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-75,201] Abbott Laboratories..., applicable to workers of Abbott Laboratories, Diagnostics Division, including on-site leased workers from... (clerical) were employed on-site at the Irving, Texas location of Abbott Laboratories, Diagnostics Division...

Actual characteristics study on HTR-10GT coupling with direct gas turbine cycle

International Nuclear Information System (INIS)

Peng Xuechuang; Zhu Shutang; Wang Jie

2005-01-01

Compared with a plant of steam turbine cycle, a HTGR plant with direct gas turbine cycle has a higher thermal efficiency. A lot of investigations on the characteristics of HTR-10GT, which is the reactor studying project of Tsinghua University, have been carried out, however, all of them are based on the theoretical Brayton Cycle which neglects many actual conditions, such as leakage, pressure loss and so on. For engineering practices, leakage is an unavoidable problem. The difference of the location and capacity of leakage will directly influence the working medium's thermoparameters and lead to fall of the cycle efficiency. The present study is focused on the performance of an actual Brayton cycle with practical conditions of leakage. The present study which based on building the physical and mathematical model of the leakage, aims to study the actual characteristics of the direct gas turbine circle. (authors)

Pinellas Plant environmental monitoring report 1986

International Nuclear Information System (INIS)

1987-04-01

The effluent and environmental monitoring programs maintained by the Pinellas Plant are designed to determine the efficiencies of treatment and control mechanisms for environmental releases; to provide measurements of discharge concentrations for comparison with applicable standards; and to assess the concentrations of these discharges in the on-site and off-site environment

75 FR 67770 - General Motors Company, Formerly Known as General Motors Corporation, Orion Assembly Plant...

Science.gov (United States)

2010-11-03

..., Formerly Known as General Motors Corporation, Orion Assembly Plant, Including On-Site Leased Workers From Aerotek Automotive, Ryder and Premier Manufacturing Support Services, Lake Orion, MI; Amended... of General Motors Company, formerly known as General Motors Corporation, Orion Assembly Plant, Lake...

75 FR 3250 - Glaxosmithkline, Including On-Site Temporary and Leased Workers From Kelly Services, Kelly...

Science.gov (United States)

2010-01-20

... subject firm. The workers are engaged in the production of penicillin-based antibiotics for humans and animals. The company reports that on-site leased workers from Dream Clean, Inc. were employed on-site at...

Number of on-site personnel and their functions

International Nuclear Information System (INIS)

Recker, M.

1986-01-01

After the definition of the general tasks, the development of an organization chart for on-site personnel is shown, the number and qualifications are indicated relating to the specific jobs. The functions of the different people are explained in detail. (orig.)

Performance of on-site Medical waste disinfection equipment in hospitals of Tabriz, Iran

Directory of Open Access Journals (Sweden)

Hassan Taghipour

2016-10-01

Full Text Available Background: The number of studies available on the performance of on-site medical waste treatment facilities is rare, to date. The aim of this study was to evaluate the performance of onsite medical waste treatment equipment in hospitals of Tabriz, Iran. Methods: A various range of the on-site medical waste disinfection equipment (autoclave, chemical disinfection, hydroclave, and dry thermal treatment was considered to select 10 out of 22 hospitals in Tabriz to be included in the survey. The apparatus were monitored mechanically, chemically, and biologically for a six months period in all of the selected hospitals. Results: The results of the chemical monitoring (Bowie-Dick tests indicated that 38.9% of the inspected autoclaves had operational problems in pre-vacuum, air leaks, inadequate steam penetration into the waste, and/or vacuum pump. The biological indicators revealed that about 55.55% of the samples were positive. The most of applied devices were not suitable for treating anatomical, pharmaceutical, cytotoxic, and chemical waste. Conclusion: Although on-site medical waste treating facilities have been installed in all the hospitals, the most of infectious-hazardous medical waste generated in the hospitals were deposited into a municipal solid waste landfill, without enough disinfection. The responsible authorities should stringently inspect and evaluate the operation of on-site medical waste treating equipment. An advanced off-site central facility with multi-treatment and disinfection equipment and enough capacity is recommended as an alternative.

KWU Nuclear Plant Analyzer

International Nuclear Information System (INIS)

Bennewitz, F.; Hummel, R.; Oelmann, K.

1986-01-01

The KWU Nuclear Plant Analyzer is a real time engineering simulator based on the KWU computer programs used in plant transient analysis and licensing. The primary goal is to promote the understanding of the technical and physical processes of a nuclear power plant at an on-site training facility. Thus the KWU Nuclear Plant Analyzer is available with comparable low costs right at the time when technical questions or training needs arise. This has been achieved by (1) application of the transient code NLOOP; (2) unrestricted operator interaction including all simulator functions; (3) using the mainframe computer Control Data Cyber 176 in the KWU computing center; (4) four color graphic displays controlled by a dedicated graphic computer, no control room equipment; and (5) coupling of computers by telecommunication via telephone

Water-chemistry and on-site sulfur-speciation data for selected springs in Yellowstone National Park, Wyoming, 1994-1995

Science.gov (United States)

Ball, James W.; Nordstrom, D. Kirk; Cunningham, Kirk M.; Schoonen, Martin A.; Xu, Yong; DeMonge, Jennifer M.

1998-01-01

Forty-two water analyses are reported for samples collected at 8 hot springs and their overflow drainages, two geysers, and two ambient-temperature acid streams in Yellowstone National Park during 1994-95. These water samples were collected and analyzed as part of the initial research investigations on sulfur redox speciation in the hot springs of Yellowstone and to document chemical changes in overflows that affect major ions, redox species, and trace elements. The sulfur redox speciation research is a collaboration between the State University of New York (SUNY) at Stony Brook and the U.S. Geological Survey (USGS). Four hot springs, Ojo Caliente, Azure, Frying Pan, and Angel Terrace, were studied in detail. Analyses were performed adjacent to the sampling site or in an on-site mobile lab truck constructed by the USGS, or later in a USGS laboratory. Water temperature, specific conductance, pH, Eh, D.O., and dissolved H2S were determined adjacent to the sample source at the time of sampling. Alkalinity and F- were determined on-site on the day of sample collection. Thiosulfate and polythionates were determined as soon as possible (minutes to hours later) by ion chromatography (IC). Other major anions (Cl-, SO4 2-, Br-) also were determined on-site by IC within two days of sample collection. Ammonium, Fe(II), and Fe(total) were determined on-site by ultraviolet/visible spectrophotometry within two days of sample collection. Later in the USGS laboratory, densities were determined. Concentrations of Ca, Mg, Li, Na, and K were determined by flame atomic absorption and emission (Na, K) spectrometry. Concentrations of Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe(total), K, Mg, Mn, Na, Ni, Pb, Si, Sr, V, and Zn were determined by inductively-coupled plasma optical emission spectrometry. Trace concentrations of Al and Mg were determined by Zeeman-corrected graphite furnace atomic absorption spectrometry. Three important conclusions from the sampling and analyses are: (1

Comparing Person-Centered Communication Education in Long-Term Care Using Onsite and Online Formats.

Science.gov (United States)

Coleman, Carissa K; Fanning, Kim; Williams, Kristine N

2015-11-01

Educating nursing home (NH) staff to provide person-centered care is complicated by scheduling, costs, and other feasibility issues. The current study compared outcomes for an in-service program focused on person-centered communication provided in onsite and online formats. The Changing Talk program was provided onsite in seven NHs (n = 327 staff). The online program included eight NHs (n = 211 staff). Analysis of variance revealed an interaction between format type and pre-/post-test scores with improved recognition of person-centered communication in the onsite group only. Group program evaluations based on the modified Diffusion of Innovation in Long-Term Care Battery indicated no significant differences between training formats. Staff perception of the program was similar. Although statistically significant gains were noted in posttest scores indicating awareness of person-centered communication for the onsite group, gains were of limited clinical significance. Feasibility and effectiveness are important considerations for in-service education supporting NH culture change. Copyright 2015, SLACK Incorporated.

75 FR 54388 - General Motors Company Formerly Known as General Motors Corporation, Orion Assembly Plant...

Science.gov (United States)

2010-09-07

... Formerly Known as General Motors Corporation, Orion Assembly Plant Including On-Site Leased Workers From Aerotek Automotive Lake Orion, MI; Amended Certification Regarding Eligibility To Apply for Worker... Motors Corporation, Orion Assembly Plant, Lake Orion, Michigan. The notice was published in the Federal...

Innovative on-site approach to oil based drilling mud waste management

International Nuclear Information System (INIS)

Laurell, A.

1999-01-01

An innovative system has been developed by Unique Oilfield Technology Services (UNOTEC) for the environmentally safe containment and decomposition of oily drilling residuals. The approach is a complete management system which provides an on-site alternative to off-site disposal. The approach uses the principles of total containment and microbial decomposition of hydrocarbons. The complete management system transforms the waste into an end product suitable for on-site land treatment, in accordance with regulatory guidelines. This paper describes how the approach can eliminate the future environmental risk and economic liability associated with hydrocarbon contaminated materials

Improving operator quality at Genkai Nuclear Power Plant

International Nuclear Information System (INIS)

Kuwano, Takeshi.

1989-01-01

Improvement in operator quality, or improvement in an operator's skill and professional knowledge, is of prime importance because of its great influence on safe and steady plant operation. This paper describes the education and training of reactor operators at the Genkai pressurized water reactor nuclear power plant with respect to the following topics: organization of Genkai power plant; education and training program management; training at the Nuclear Training Center; training and education on-site including emergency procedures training, normal operating procedures training, informational study of emergency conditions in existing plants, and all-around training of operators; qualifying tests for supervisors; and operator motivation

Comparison of Onsite Versus Online Chart Reviews as Part of the American College of Radiation Oncology Accreditation Program.

Science.gov (United States)

Hepel, Jaroslaw T; Heron, Dwight E; Mundt, Arno J; Yashar, Catheryn; Feigenberg, Steven; Koltis, Gordon; Regine, William F; Prasad, Dheerendra; Patel, Shilpen; Sharma, Navesh; Hebert, Mary; Wallis, Norman; Kuettel, Michael

2017-05-01

Accreditation based on peer review of professional standards of care is essential in ensuring quality and safety in administration of radiation therapy. Traditionally, medical chart reviews have been performed by a physical onsite visit. The American College of Radiation Oncology Accreditation Program has remodeled its process whereby electronic charts are reviewed remotely. Twenty-eight radiation oncology practices undergoing accreditation had three charts per practice undergo both onsite and online review. Onsite review was performed by a single reviewer for each practice. Online review consisted of one or more disease site-specific reviewers for each practice. Onsite and online reviews were blinded and scored on a 100-point scale on the basis of 20 categories. A score of less than 75 was failing, and a score of 75 to 79 was marginal. Any failed charts underwent rereview by a disease site team leader. Eighty-four charts underwent both onsite and online review. The mean scores were 86.0 and 86.9 points for charts reviewed onsite and online, respectively. Comparison of onsite and online reviews revealed no statistical difference in chart scores ( P = .43). Of charts reviewed, 21% had a marginal (n = 8) or failing (n = 10) score. There was no difference in failing charts ( P = .48) or combined marginal and failing charts ( P = .13) comparing onsite and online reviews. The American College of Radiation Oncology accreditation process of online chart review results in comparable review scores and rate of failing scores compared with traditional on-site review. However, the modern online process holds less potential for bias by using multiple reviewers per practice and allows for greater oversight via disease site team leader rereview.

Risk-based design of process plants with regard to domino effects and land use planning

Energy Technology Data Exchange (ETDEWEB)

Khakzad, Nima, E-mail: nkhakzad@gmail.com [Safety and Security Science Group (S3G), Faculty of Technology, Policy and Management, TU Delft, Delft (Netherlands); Reniers, Genserik [Safety and Security Science Group (S3G), Faculty of Technology, Policy and Management, TU Delft, Delft (Netherlands); Antwerp Research Group on Safety and Security (ARGoSS), Faculty of Applied Economics, Universiteit Antwerpen, Antwerp (Belgium); Research Group CEDON, Campus Brussels, KULeuven, Brussels (Belgium)

2015-12-15

Highlights: • A Bayesian network methodology has been developed to estimate the total probability of major accidents in chemical plants. • Total probability of accidents includes the probability of individual accidents and potential domino effects. • The methodology has been extended to calculate on-site and off-site risks. • The results of the risk analysis have been used in a multi-criteria decision analysis technique to risk-based design of chemical plants. - Abstract: Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum.

Nuclear power plant simulators for operator licensing and training. Part I. The need for plant-reference simulators. Part II. The use of plant-reference simulators

International Nuclear Information System (INIS)

Rankin, W.L.; Bolton, P.A.; Shikiar, R.; Saari, L.M.

1984-05-01

Part I of this report presents technical justification for the use of plant-reference simulators in the licensing and training of nuclear power plant operators and examines alternatives to the use of plant-reference simulators. The technical rationale is based on research on the use of simulators in other industries, psychological learning and testing principles, expert opinion and user opinion. Part II discusses the central considerations in using plant-reference simulators for licensing examination of nuclear power plant operators and for incorporating simulators into nuclear power plant training programs. Recommendations are presented for the administration of simulator examinations in operator licensing that reflect the goal of maximizing both reliability and validity in the examination process. A series of organizational tasks that promote the acceptance, use, and effectiveness of simulator training as part of the onsite training program is delineated

Development of emergency response training focusing on non-technical skills. (1) Development and Trial of 'TAIKAN Training'

International Nuclear Information System (INIS)

Hikono, Masaru; Matsui, Yuko; Kanayama, Masaki

2017-01-01

Since the Great East Japan Earthquake of 2011, there have been increasing calls for developing the leadership capabilities of managers who are in charge of command and control of the on-site emergency response center at nuclear power plants. Training programs to improve non-technical skills are being developed and introduced. The authors developed an active learning exercise 'TAIKAN Training' that can be repeatedly performed on-site, targeting on-site commander teams in charge of the initial response in an emergency situation. The exercise forms the core element of a non-technical skills training curriculum. This paper outlines the developed exercise, evaluates the stress on the participants caused by the exercise, and identifies any issues before actually introducing it to a site. (author)

78 FR 12358 - UBS Financial Services, Inc., Wealth Management Americas Operations, Including On-Site Leased...

Science.gov (United States)

2013-02-22

..., Inc., Wealth Management Americas Operations, Including On-Site Leased Workers From Leafstone... Services, Inc., Wealth Management Americas Operations (UBS), Weehawken, New Jersey. The workers are engaged... to include all leased workers on-site at UBS Financial Services, Inc., Wealth Management Americas...

Carbon and nutrient removal from on-site wastewater using extended-aeration activated sludge and ion exchange.

Science.gov (United States)

Safferman, Steven I; Burks, Bennette D; Parker, Robert A

2004-01-01

The need to improve on-site wastewater treatment processes is being realized as populations move into more environmentally sensitive regions and regulators adopt the total maximum daily load approach to watershed management. Under many conditions, septic systems do not provide adequate treatment; therefore, advanced systems are required. These systems must remove significant amounts of biochemical oxygen demand (BOD) and suspended solids, and substantially nitrify, denitrify, and remove phosphorus. Many existing advanced on-site wastewater systems effectively remove BOD, suspended solids, and ammonia, but few substantially denitrify and uptake phosphorus. The purpose of this research was to design and test modifications to an existing on-site wastewater treatment system to improve denitrification and phosphorus removal. The Nayadic (Consolidated Treatment Systems, Inc., Franklin, Ohio), an established, commercially available, extended-aeration, activated sludge process, was used to represent a typical existing system. Several modifications were considered based on a literature review, and the option with the best potential was tested. To improve denitrification, a supplemental treatment tank was installed before the Nayadic and a combination flow splitter, sump, and pump box with a recirculation system was installed after it. A recirculation pump returned a high proportion of the system effluent back to the supplemental treatment tank. Two supplemental treatment tank sizes, three flowrates, and three recirculation rates were tested. Actual wastewater was dosed as brief slugs to the system in accordance with a set schedule. Several ion-exchange resins housed in a contact column were tested on the effluent for their potential to remove phosphorus. Low effluent levels of five-day biochemical oxygen demand, suspended solids, and total nitrogen were achieved and substantial phosphorous removal was also achieved using a 3780-L supplemental treatment tank, a recirculation

78 FR 28642 - Eastman Kodak Company, Electrographic Print Solutions, Including On-Site Leased Workers From...

Science.gov (United States)

2013-05-15

... Kodak Company, Electrographic Print Solutions, Including On-Site Leased Workers From Adecco and Datrose, Spencerport, New York; Eastman Kodak Company, IPS, Including On-Site Leased Workers From Adecco, Dayton, Ohio... Trade Adjustment Assistance (TAA) filed on behalf of Eastman Kodak Company, Electrographic Print...

78 FR 19530 - Eastman Kodak Company (GCG), Electrographic Print Solutions, Including On-Site Leased Workers...

Science.gov (United States)

2013-04-01

... Kodak Company (GCG), Electrographic Print Solutions, Including On-Site Leased Workers From Adecco and Datrose, Spencerport, New York; Eastman Kodak Company, IPS, Including On-Site Leased Workers From Adecco..., 2011, applicable to workers of Eastman Kodak Company (GCG), Electrographic Print Solutions, including...

76 FR 175 - Faurecia Emissions Control Technologies Including On-Site Leased Workers From Adecco Employment...

Science.gov (United States)

2011-01-03

... Technologies Including On-Site Leased Workers From Adecco Employment Servcies and Emcon Technologies, Troy, MI..., applicable to workers of Faurecia Emissions Control Technologies, Troy, Michigan, including on-site leased workers from Adecco Employment Services, Troy, Michigan. The Department's notice of determination was...

75 FR 28295 - Cummins Filtration, Including On-Site Leased Workers From Manpower and Spherion Staffing...

Science.gov (United States)

2010-05-20

.... The Department has determined that workers from Spherion Staffing were sufficiently under the control..., Including On-Site Leased Workers From Manpower and Spherion Staffing, Including On-Site Workers From Hagemeyer North America, Lake Mills, IA; Amended Certification Regarding Eligibility To Apply for Worker...

Robotics for nuclear power plants

International Nuclear Information System (INIS)

Nakayama, Ryoichi; Kimura, Motohiko; Abe, Akira

1993-01-01

A continuing need exists for automatic or remote-controlled machines or robots which can perform inspection and maintenance tasks in nuclear power plants. Toshiba has developed several types of monofunctional and multi- functional robots for such purposes over the past 20 years, some of which have already been used in actual plants. This paper describes new multifunctional robots for inspection and maintenance. An inspection robot has been applied in an actual plant for two years for performance testing. Maintenance robots for grinding tasks have also been developed, which can be easily teleoperated by the operator using automatic control. These new robots are expected to be applied to actual inspection and maintenance work in nuclear power plants. (author)

28 CFR 79.13 - Proof of physical presence for the requisite period and proof of participation onsite during a...

Science.gov (United States)

2010-07-01

... participated onsite in the atmospheric detonation of a nuclear device. ... requisite period and proof of participation onsite during a period of atmospheric nuclear testing. 79.13... presence for the requisite period and proof of participation onsite during a period of atmospheric nuclear...

Effect of physical property of supporting media and variable hydraulic loading on hydraulic characteristics of advanced onsite wastewater treatment system.

Science.gov (United States)

Sharma, Meena Kumari; Kazmi, Absar Ahmad

2015-01-01

A laboratory-scale study was carried out to investigate the effects of physical properties of the supporting media and variable hydraulic shock loads on the hydraulic characteristics of an advanced onsite wastewater treatment system. The system consisted of two upflow anaerobic reactors (a septic tank and an anaerobic filter) accommodated within a single unit. The study was divided into three phases on the basis of three different supporting media (Aqwise carriers, corrugated ring and baked clay) used in the anaerobic filter. Hydraulic loadings were based on peak flow factor (PFF), varying from one to six, to simulate the actual conditions during onsite wastewater treatment. Hydraulic characteristics of the system were identified on the basis of residence time distribution analyses. The system showed a very good hydraulic efficiency, between 0.86 and 0.93, with the media of highest porosity at the hydraulic loading of PFF≤4. At the higher hydraulic loading of PFF 6 also, an appreciable hydraulic efficiency of 0.74 was observed. The system also showed good chemical oxygen demand and total suspended solids removal efficiency of 80.5% and 82.3%, respectively at the higher hydraulic loading of PFF 6. Plug-flow dispersion model was found to be the most appropriate one to describe the mixing pattern of the system, with different supporting media at variable loading, during the tracer study.

On-site and off-site emergency planning at Cekmece Nuclear Research and Training Centre

International Nuclear Information System (INIS)

Soyberk, O.A.

1986-01-01

An emergency plan was prepared for minimizing the consequences of any unforeseen radiation accident in Cekmece Nuclear Research and Training Centre (CNAEM) in Istanbul, Turkey. CNAEM is situated near Kucukcekmece Lake, which is about 30 km to the west of Istanbul. It includes two pool-type research reactors of 1 MW(th) and 5 MW(th). The population in the nearest inhabited areas varies from 1000 to 50,000. Accidents are classified, according to their severity, into three categories at CNAEM: (a) local emergency, (b) on-site emergency, (c) off-site emergency. During local emergency situations evacuation is not necessary. An on-site emergency situation requires the evacuation of personnel from the plant. Personnel hearing the emergency alarm should move directly to the preselected place as soon as possible. An off-site emergency is any accident that leads to widespread contamination outside the boundary. In this situation the Turkish Atomic Energy Authority and governmental authorities are notified immediately. The emergency organization group consists of: (a) Plant Superintendent, (b) Emergency Director, (c) Reactor Supervisor, (d) Senior Health Physicist, (e) Reactor Shift Operator, (f) Health Physicists. The administration building will be used as the Emergency Control Centre. The emergency teams working under the direction of the Emergency Director consist of: (a) Health Physics, (b) Fire and Rescue, (c) First Aid and Decontamination, (d) Transportation, (e) Security and Patrol. The emergency situation is evaluated in three phases at CNAEM. The first phase is the first few hours after the beginning of the accident. The second phase is between 8-10 hours or more following the first phase. The third phase is the recovery phase. The integrated doses over periods of two hours and two days are calculated according to the situation of the core, i.e. total or partial melting, and weather conditions. The results of the calculated parameters can be adapted to possible

Monitoring actual temperatures in Susquehanna SES reactor buildings

International Nuclear Information System (INIS)

Derkacs, A.P.

1991-01-01

PP and L has been monitoring temperatures in the Susquehanna SES reactor building with digital temperature recorders since 1986. In early 1990, data from four representative areas was analyzed to determine the temperature in each area which would produce the same rate of degradation as the distribution of actual temperatures recorded over about 40 months. From these effective average temperatures, qualified life multipliers were determined for activation energies in the range of 0.5 to 1.5 and those multipliers were used to estimate new qualified lives and the number of replacements which might be saved during the life of the plant. The results indicate that pursuing a program of determining EQ qualified lives from actual temperatures, rather than maximum design basis temperatures, will provide a substantial payback in reduced EQ driven maintenance

Local Area Artworks: Collaborative Art Interpretation On-Site

DEFF Research Database (Denmark)

Polli, Anna Maria; Korn, Matthias; Klokmose, Clemens Nylandsted

2013-01-01

In this paper we present Local Area Artworks, a system enabling collaborative art interpretation on-site deployed during an exhibition in a local art gallery. Through the system, we explore ways to re-connect people to the local place by making use of their personal mobile devices as interfaces...

Slope stability and bearing capacity of landfills and simple on-site test methods.

Science.gov (United States)

Yamawaki, Atsushi; Doi, Yoichi; Omine, Kiyoshi

2017-07-01

This study discusses strength characteristics (slope stability, bearing capacity, etc.) of waste landfills through on-site tests that were carried out at 29 locations in 19 sites in Japan and three other countries, and proposes simple methods to test and assess the mechanical strength of landfills on site. Also, the possibility of using a landfill site was investigated by a full-scale eccentric loading test. As a result of this, landfills containing more than about 10 cm long plastics or other fibrous materials were found to be resilient and hard to yield. An on-site full scale test proved that no differential settlement occurs. The repose angle test proposed as a simple on-site test method has been confirmed to be a good indicator for slope stability assessment. The repose angle test suggested that landfills which have high, near-saturation water content have considerably poorer slope stability. The results of our repose angle test and the impact acceleration test were related to the internal friction angle and the cohesion, respectively. In addition to this, it was found that the air pore volume ratio measured by an on-site air pore volume ratio test is likely to be related to various strength parameters.

The feasibility of mobile computing for on-site inspection.

Energy Technology Data Exchange (ETDEWEB)

Horak, Karl Emanuel; DeLand, Sharon Marie; Blair, Dianna Sue

2014-09-01

With over 5 billion cellphones in a world of 7 billion inhabitants, mobile phones are the most quickly adopted consumer technology in the history of the world. Miniaturized, power-efficient sensors, especially video-capable cameras, are becoming extremely widespread, especially when one factors in wearable technology like Apples Pebble, GoPro video systems, Google Glass, and lifeloggers. Tablet computers are becoming more common, lighter weight, and power-efficient. In this report the authors explore recent developments in mobile computing and their potential application to on-site inspection for arms control verification and treaty compliance determination. We examine how such technology can effectively be applied to current and potential future inspection regimes. Use cases are given for both host-escort and inspection teams. The results of field trials and their implications for on-site inspections are discussed.

The impact of onsite workplace health-enhancing physical activity interventions on worker productivity: a systematic review.

Science.gov (United States)

Pereira, Michelle Jessica; Coombes, Brooke Kaye; Comans, Tracy Anne; Johnston, Venerina

2015-06-01

The aim of this study is to investigate the effects of onsite workplace health-enhancing physical activity (HEPA) programmes on worker productivity. The PROSPERO registration number is CRD42014008750. A search for controlled trials or randomised controlled trials (RCTs) that investigated the effects of onsite workplace HEPA programmes on productivity levels of working adults was performed. Risk of bias of included studies was assessed, and the inter-rater reliability of the quality assessment was analysed. Qualitative synthesis of available evidence is presented. Eight studies were included in the review. There is consistent evidence that onsite workplace HEPA programmes do not reduce levels of sick leave. There appears to be inconsistent evidence of the impact of onsite workplace HEPA programmes on worker productivity. A high-quality study of an onsite combination (aerobic, strengthening and flexibility) HEPA regime and a moderate-quality study of a Tai Chi programme improved worker productivity measured with questionnaires in female laundry workers and older female nurses, respectively. Two high-quality studies and four moderate-quality studies did not show benefit. Studies that showed benefit were mainly those designed with productivity measures as primary outcomes, delivered to occupations involved with higher physical loads, and had higher compliance and programme intensity. The small number of studies and the lack of consistency among studies limited further analyses. There is inconsistent evidence that onsite workplace HEPA programmes improve self-reported worker productivity. Future high-quality RCTs of onsite workplace HEPA programmes should be designed around productivity outcomes, target at-risk groups and investigate interventions of sufficient intensity. High attendance with improved recording is needed to achieve significant results in augmenting worker productivity. Published by the BMJ Publishing Group Limited. For permission to use (where not

Radioactive waste on-site storage alternative

International Nuclear Information System (INIS)

Dufrane, K.H.

1983-01-01

The first, most frequently evaluated approach for the large producer is the construction of a relatively expensive storage building. However, with the likely possibility that at least one disposal site will remain available and the building never used, such expenditures are difficult to justify. A low cost, but effective alternative, is the use of ''On-Site Storage Containers'' (OSSC) when and if required. Radwaste is only stored in the OSSC if a disposal site is not available. A small number of OSSC's would be purchased initially just to assure immediate access to storage. Only in the unlikely event of total disposal sites closure would additional OSSC's have to be obtained and even this is cost effective. With two or three months of storage available on site, production lead time is sufficient for the delivery of additional units at a rate faster than the waste can be produced. The recommended OSSC design would be sized and shielding optimized to meet the needs of the waste generator. Normally, this would duplicate the shipping containers (casks or vans) currently in use. The reinforced concrete design presented is suitable for outside storage, contains a leakproof polyethylene liner and has remote sampling capability. Licensing would be under 10CFR50.59 for interim storage with long-term storage under 10CFR30 not an impossibility. Cost comparisons of this approach vs. building construction show that for a typical reactor plant installation, the OSSC offers direct savings even under the worst case assumption that no disposal sites are available and the time value of money is zero

Cogeneration plants: SNAM (Italy) initiatives and incentives

International Nuclear Information System (INIS)

Pipparelli, M.

1991-01-01

First, an overall picture is presented of the extension of the use of cogeneration by the Italian brick industry. The particular suitability and usefulness of this form of energy to the brick industry are pointed out. Then a look is given at the legal and financial incentives which have been built into the National Energy Plan to encourage on-site production by Italian industries. Finally, a review is made of initiatives made by SNAM (the Italian National Methane Distribution Society) to develop a favourable tariff structure for on-site power producers using methane as their energy source, as well as, of the Society's efforts to set up a cogeneration equipment consulting service which would provide advice on cogeneration plant design, operation and maintenance

Training and qualification of nuclear power plant operators (4)

International Nuclear Information System (INIS)

Ohsuga, Y.

2009-01-01

Training center using the simulators, instructor training, training upgrade, deployment of digital control panel and review of training were described with overseas practice. Recently, nuclear power plant on-site simulators were also used for respective operator training. Operator teamwork training, training team performance upgrade, reflection of operating experiences in nuclear power plant accidents, development of training support equipments and management of training records were needed to review and upgrade training and qualification programs. (T. Tanaka)

Selection and Vegetative Propagation of Native Woody Plants for Water-Wise Landscaping

OpenAIRE

Rupp, Larry A; Varga, William A; Anderson, David

2011-01-01

Native woody plants with ornamental characteristics such as brilliant fall color, dwarf form, or glossy leaves have potential for use in water conserving urban landscapes. Individual accessions with one or more of these unique characteristics were identified based on the recommendations of a wide range of plant enthusiasts (both professional and amateur). Documentation of these accessions has been done through locating plants on-site where possible and then developing a record based on digita...

Safety assessment requirements for onsite transfers of radioactive material

International Nuclear Information System (INIS)

Opperman, E.K.; Jackson, E.J.; Eggers, A.G.

1992-05-01

This document contains the requirements for developing a safety assessment document for an onsite package containing radioactive material. It also provides format and content guidance to establish uniformity in the safety assessment documentation and to ensure completeness of the information provided

75 FR 453 - FLSMidth, Inc., Cement Division, Product Engineering, Including On-Site Leased Workers of Aerotek...

Science.gov (United States)

2010-01-05

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,048] FLSMidth, Inc., Cement..., Inc., Cement Division, Product Engineering, including on-site leased workers of Aerotek Contract.... were also employed on-site at FLSmidth, Inc., Cement Division, Product Engineering, Bethlehem...

Experience in verification regimes. United States On-Site Inspection Agency

International Nuclear Information System (INIS)

Reppert, J.

1998-01-01

Experiences are described of the United States On-site Inspection Agency in verification regimes all over the world where it has been applied in the last 30 years. The challenge for the future is to extend the benefits of the applied tools to all states in all regions to enhance stability and to create conditions for peace at lower levels of armaments than currently exist. The USA need to engage states currently caught in cycles of violence and arms escalation. They must examine technologies which together with on-site aspects of verification or transparency regimes can provide a comprehensive picture at affordable costs. They foresee a growth in combined training with new states entering for the first time into regime that include arms control and transparency measure

Methods for estimating on-site ambient air concentrations at disposal sites

International Nuclear Information System (INIS)

Hwang, S.T.

1987-01-01

Currently, Gaussian type dispersion modeling and point source approximation are combined to estimate the ambient air concentrations of pollutants dispersed downwind of an areawide emission source, using the approach of virtual point source approximation. This Gaussian dispersion modeling becomes less accurate as the receptor comes closer to the source, and becomes inapplicable for the estimation of on-site ambient air concentrations at disposal sites. Partial differential equations are solved with appropriate boundary conditions for use in estimating the on-site concentrations in the ambient air impacted by emissions from an area source such as land disposal sites. Two variations of solution techniques are presented, and their predictions are compared

Emergency preparedness in Germany. Development of manuals for emergency exercises

International Nuclear Information System (INIS)

Bath, N.; Berg, H.P.

2001-01-01

Extensive technical and administrative measures are taken in the German nuclear power plants in order to be able to perform effective on-site accident management in case that an event actually occurs. Because of the 'beyond-design-basis' character of these accidents, there are no detailed regulations and guidelines for the development of emergency preparedness in Germany. However, it has become common practice to perform at least one emergency exercise per year in every German nuclear plant. Bundesamt fuer Strahlenschutz has launched a project for the development of a manual for planning, co-ordination, and assessment of on-site accident management exercises. The objective is to establish an approach with a sound technical basis harmonized on federal level. The current status of this project and further activities are described.(author)

Risk-adapted monitoring is not inferior to extensive on-site monitoring: Results of the ADAMON cluster-randomised study.

Science.gov (United States)

Brosteanu, Oana; Schwarz, Gabriele; Houben, Peggy; Paulus, Ursula; Strenge-Hesse, Anke; Zettelmeyer, Ulrike; Schneider, Anja; Hasenclever, Dirk

2017-12-01

Background According to Good Clinical Practice, clinical trials must protect rights and safety of patients and make sure that the trial results are valid and interpretable. Monitoring on-site has an important role in achieving these objectives; it controls trial conduct at trial sites and informs the sponsor on systematic problems. In the past, extensive on-site monitoring with a particular focus on formal source data verification often lost sight of systematic problems in study procedures that endanger Good Clinical Practice objectives. ADAMON is a prospective, stratified, cluster-randomised, controlled study comparing extensive on-site monitoring with risk-adapted monitoring according to a previously published approach. Methods In all, 213 sites from 11 academic trials were cluster-randomised between extensive on-site monitoring (104) and risk-adapted monitoring (109). Independent post-trial audits using structured manuals were performed to determine the frequency of major Good Clinical Practice findings at the patient level. The primary outcome measure is the proportion of audited patients with at least one major audit finding. Analysis relies on logistic regression incorporating trial and monitoring arm as fixed effects and site as random effect. The hypothesis was that risk-adapted monitoring is non-inferior to extensive on-site monitoring with a non-inferiority margin of 0.60 (logit scale). Results Average number of monitoring visits and time spent on-site was 2.1 and 2.7 times higher in extensive on-site monitoring than in risk-adapted monitoring, respectively. A total of 156 (extensive on-site monitoring: 76; risk-adapted monitoring: 80) sites were audited. In 996 of 1618 audited patients, a total of 2456 major audit findings were documented. Depending on the trial, findings were identified in 18%-99% of the audited patients, with no marked monitoring effect in any of the trials. The estimated monitoring effect is -0.04 on the logit scale with two-sided 95

75 FR 11921 - Heritage Aviation, Ltd., Including On-Site Leased Workers From Global Technical Services and...

Science.gov (United States)

2010-03-12

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,924] Heritage Aviation, Ltd., Including On-Site Leased Workers From Global Technical Services and Global, Inc. (Global Employment... from Heritage Aviation, Ltd, including on-site leased workers from Global Technical Services, Grand...

76 FR 2145 - International Paper Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2011-01-12

... Company, Franklin Pulp & Paper Mill, Including On-Site Leased Workers From Railserve, Franklin, VA..., applicable to workers and former workers of International Paper Company, Franklin Pulp & Paper Mill, Franklin... follows: All workers International Paper Company, Franklin Pulp & Paper Mill, including on-site leased...

International ENEA/ISMES/ENS specialist meeting on 'On-site experimental verification of the seismic behaviour of nuclear reactor structures and components'. Proceedings

International Nuclear Information System (INIS)

1988-01-01

The seismic verification of nuclear plants is a subject of increasing interest in all the industrial countries, with respect to both the safety aspects and the impact of the seismic event on the design and the costs of a nuclear reactor. This topic is especially of great interest for a country like Italy, whose territory is unfortunately characterized by non - negligible seismicity: we remember, not too many years ago, the catastrophic earthquakes of Frioul and Irpinia, that caused thousands of dead people. The meeting aimed at establishing the state-of-the-art on on-site testing of nuclear reactors structures and components, with particular attention to experiences and research programmes concerning: methodologies of on-site tests and interpretation of the experimental data; seismic monitoring systems, recorded data, their use and interpretation; calibration and validation of numerical analyses. Six technical sessions were held, during which 23 high papers were presented and discussed, and six panel discussions were held (the importance of discussion was emphasized in the meeting). The technical contributions consisted of: an introduction paper, summarizing the seismic studies performed in Italy for PEC reactor and explaining the reasons why on-site tests had been performed on this reactor; 6 invited lectures, one for each of the countries that are more deeply involved in seismic analysis, providing the state-of-the-art on the topics of interest for the meeting; 16 contributed papers dealing with more specific technical items, related to the various countries and international organizations

International ENEA/ISMES/ENS specialist meeting on 'On-site experimental verification of the seismic behaviour of nuclear reactor structures and components'. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-07-01

The seismic verification of nuclear plants is a subject of increasing interest in all the industrial countries, with respect to both the safety aspects and the impact of the seismic event on the design and the costs of a nuclear reactor. This topic is especially of great interest for a country like Italy, whose territory is unfortunately characterized by non - negligible seismicity: we remember, not too many years ago, the catastrophic earthquakes of Frioul and Irpinia, that caused thousands of dead people. The meeting aimed at establishing the state-of-the-art on on-site testing of nuclear reactors structures and components, with particular attention to experiences and research programmes concerning: methodologies of on-site tests and interpretation of the experimental data; seismic monitoring systems, recorded data, their use and interpretation; calibration and validation of numerical analyses. Six technical sessions were held, during which 23 high papers were presented and discussed, and six panel discussions were held (the importance of discussion was emphasized in the meeting). The technical contributions consisted of: an introduction paper, summarizing the seismic studies performed in Italy for PEC reactor and explaining the reasons why on-site tests had been performed on this reactor; 6 invited lectures, one for each of the countries that are more deeply involved in seismic analysis, providing the state-of-the-art on the topics of interest for the meeting; 16 contributed papers dealing with more specific technical items, related to the various countries and international organizations.

Ageing nuclear plants inspection, maintenance and performance monitoring eased by Data Validation and Reconciliation (DVR) approach

International Nuclear Information System (INIS)

Quang, A. Tran; Chares, R.

2012-01-01

With the long term operation of nuclear power plants, decisions to replace or repair should be optimized from an economical, human resource and safety point of view. In that frame, the operation requires a continuous inspection and testing of systems in order to detect degradations and failures at an early stage. Nevertheless, in spite of the fact that such assiduous vigilance ensures safety, it is not optimized in terms of man power and maintenance costs. Preventive strategies show the same types of drawbacks. On top of that, these maintenance procedures rely on process measurements which accuracy, availability and reliability cannot always be ensured. The present paper introduces a new approach to the maintenance management of ageing installations and suggests a method that overcomes the actual drawbacks. The Reconciliation and Validation of data (DVR) is an advanced and innovative technology that relies on process data statistics, thermodynamic and on-site process knowledge. Benefits of real-time applications are also presented. (author)

Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

International Nuclear Information System (INIS)

Mccoy, J.C.

1997-01-01

The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

ON-SITE SOLID-PHASE EXTRACTION AND LABORATORY ...

Science.gov (United States)

Fragrance materials such as synthetic musks in aqueous samples, are normally determined by gas chromatography/mass spectrometry in the selected ion monitoring (SIM) mode to provide maximum sensitivity after liquid-liquid extraction of I -L samples. Full-scan mass spectra are required to verify that a target analyte has been found by comparison with the mass spectra of fragrance compounds in the NIST mass spectral library. A I -L sample usually provides insufficient analyte for full scan data acquisition. This paper describes an on-site extraction method developed at the U.S. Environmental Protection Agency (USEPA)- Las Vegas Nevada - for synthetic musks from 60 L of wastewater effluent. Such a large sample volume permits high-quality, full-scan mass spectra to be obtained for a wide array of synthetic musks. Quantification of these compounds was achieved from the full-scan data directly, without the need to acquire SIM data. The detection limits obtained with this method are an order of magnitude lower than those obtained from liquid-liquid and other solid phase extraction methods. This method is highly reproducible, and recoveries ranged from 80 to 97% in spiked sewage treatment plant effluent. The high rate of sorbent-sample mass transfer eliminated the need for a methanolic activation step, which reduced extraction time, labor, and solvent use, More samples could be extracted in the field at lower cost. After swnple extraction, the light- weight cartridges ar

76 FR 62451 - Avon Products, Inc., Including On-Site Leased Workers From Spherion/Source Right, Springdale...

Science.gov (United States)

2011-10-07

...., Including On-Site Leased Workers From Spherion/Source Right, Springdale, Ohio; Amended Certification... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

76 FR 27366 - CEVA Freight, LLC, Dell Logistics Division, Including On-Site Leased Workers From Prologistix...

Science.gov (United States)

2011-05-11

... Logistics Division, Including On-Site Leased Workers From Prologistix, Including Workers Whose Unemployment..., applicable to workers of CEVA Freight, LLC, Dell Logistics Division, including on-site leased workers from... workers employed at CEVA Freight, LLC, Dell Logistics Division, Winston-Salem, North Carolina who were...

76 FR 50272 - West, A Thomson Reuters Business, Thomson Reuters Legal Division, Including On-Site Leased...

Science.gov (United States)

2011-08-12

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-75,099] West, A Thomson Reuters Business, Thomson Reuters Legal Division, Including On-Site Leased Workers From Adecco, Albuquerque, New... former workers of West, A Thomson Reuters Business, Thomson Reuters Legal Division, including On-Site...

Large-volume constant-concentration sampling technique coupling with surface-enhanced Raman spectroscopy for rapid on-site gas analysis

Science.gov (United States)

Zhang, Zhuomin; Zhan, Yisen; Huang, Yichun; Li, Gongke

2017-08-01

In this work, a portable large-volume constant-concentration (LVCC) sampling technique coupling with surface-enhanced Raman spectroscopy (SERS) was developed for the rapid on-site gas analysis based on suitable derivatization methods. LVCC sampling technique mainly consisted of a specially designed sampling cell including the rigid sample container and flexible sampling bag, and an absorption-derivatization module with a portable pump and a gas flowmeter. LVCC sampling technique allowed large, alterable and well-controlled sampling volume, which kept the concentration of gas target in headspace phase constant during the entire sampling process and made the sampling result more representative. Moreover, absorption and derivatization of gas target during LVCC sampling process were efficiently merged in one step using bromine-thiourea and OPA-NH4+ strategy for ethylene and SO2 respectively, which made LVCC sampling technique conveniently adapted to consequent SERS analysis. Finally, a new LVCC sampling-SERS method was developed and successfully applied for rapid analysis of trace ethylene and SO2 from fruits. It was satisfied that trace ethylene and SO2 from real fruit samples could be actually and accurately quantified by this method. The minor concentration fluctuations of ethylene and SO2 during the entire LVCC sampling process were proved to be samples were achieved in range of 95.0-101% and 97.0-104% respectively. It is expected that portable LVCC sampling technique would pave the way for rapid on-site analysis of accurate concentrations of trace gas targets from real samples by SERS.

Robotic fabrication and inspection for power plants

International Nuclear Information System (INIS)

Date, Ranjit

2002-01-01

The usage of Robotic Automation is now an integral part of the modern manufacturing systems. Applications in nuclear power plants is no exception. As a matter of fact, as a result of the hazards of radiations for the human workers makes automation of the on-site working highly desirable. This presentation will focus on the broad benefits by use of automation in Power plants. Various processes and technologies for robotic applications in fabrication, maintenance and inspection will be highlighted. The specific technology features for use in nuclear environments will be highlighted

Radiometric analyses of floodplain sediments at the Savannah River Plant

International Nuclear Information System (INIS)

Lower, M.W.

1987-09-01

A Comprehensive Cooling Water Study to assess the effects of reactor cooling water discharges and related reactor area liquid releases to onsite streams and the nearby Savannah River has been completed at the US Department of Energy's Savannah River Plant (SRP). Extensive radiometric analyses of man-made and naturally occurring gamma-emitting radionuclides were measured in floodplain sediment cores extracted from onsite surface streams at SRP and from the Savannah River. Gamma spectrometric analyses indicate that reactor operations contribute to floodplain radioactivity levels slightly higher than levels associated with global fallout. In locations historically unaffected by radioactive releases from SRP operations, Cs-137 concentrations were found at background and fallout levels of about 1 pCi/g. In onsite streams that provided a receptor for liquid radioactive releases from production reactor areas, volume-weighted Cs-137 concentrations ranged by core from background levels to 55 pCi/g. Savannah River sediments contained background and atmospheric fallout levels of Cs-137 only. 2 refs., 5 figs

77 FR 3499 - Sony Electronics, Inc., Including On-Site Leased Workers From Selectremedy Park Ridge, NJ...

Science.gov (United States)

2012-01-24

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,501M] Sony Electronics, Inc... Electronics, Inc., SEL Headquarters, including on-site leased workers of SelectRemedy, StaffMark, and Payrolling.com , San Diego, California (TA-W-71,501); Sony Electronics, Inc., including on-site leased...

75 FR 21353 - Intel Corporation, Fab 20 Division, Including On-Site Leased Workers From Volt Technical...

Science.gov (United States)

2010-04-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,642] Intel Corporation, Fab 20... of Intel Corporation, Fab 20 Division, including on-site leased workers of Volt Technical Resources... Precision, Inc. were employed on-site at the Hillsboro, Oregon location of Intel Corporation, Fab 20...

Onsite well screening with a transportable gas chromatography/mass spectrometer system

International Nuclear Information System (INIS)

Rossabi, J.; Eckenrode, B.A.; Owens, B.

1992-01-01

The number of hazardous waste site operations continue to multiply. The requirements for efficient chemical assessment and monitoring of these sites become more stringent daily. As more samples are required, the time required for cleanup operations also increases and may make analytical costs prohibitive. Thus improvements in operation efficiency and reduction of cost in evaluating specific sites to minimize or eliminate their toxic effects on the surrounding environment are critical. For many years a formal policy did not exist for the disposal of waste solvents and other chemicals, thus many of these compounds were disposed of ensite. So long as these materials were contained onsite they were not considered to pose a threat to the surrounding environment. We have since determined that many of these compounds found their way into the groundwater. Contaminants such as trichloroethylene and perchloroethylene, which were heavily used for cleaning and degreasing purposes, must be monitored. Groundwater wells can be used to define the location and extent of the migration of any contaminant plume and aid in the determination of required cleanup. The major problem is that monitoring of hundreds of wells may be necessary, requiring several hundred samples on a quarterly basis to characterize the degree and extent of any contamination. Onsite analysis of monitoring wells for this characterization of waste operations could provide time savings and significant cost reduction. Field analyses can provide the required analytical results quickly and at a reduced cost without compromising either sample integrity or data quality. By using onsite analytical instrumentation, such as a field-transportable gas chromatograph/mass spectrometer (GC/MS), screening analyses can be performed to eliminate retturning to the laboratory with meaningless samples. Onsite GC/MS will provide qualitative or semi-quantitative information that can significantly simplify subsequent laboratory analyses

Long-term leach rates of glasses containing actual waste

International Nuclear Information System (INIS)

Wiley, J.R.; LeRoy, J.H.

1979-01-01

Leach rates of borosilicate glasses that contained actual Savannah River Plant waste were measured. Leaching was done by water and by buffer solutions of pH 4, 7, and 9. Leach rates were then determined from the amount of 137 Cs, 90 Sr, and Pu released into the leach solutions. The cumulative fractions leached were fit to a mathematical model that included leaching by diffusion and glass dissolution

Comparison and critical review of onsite treatment of petroleum contaminated soils

International Nuclear Information System (INIS)

Ellison, R.

1991-01-01

This paper provides a summary of information developed in the Onsite Treatment of Contaminated Soil Manual (Manual) prepared for the Western States Petroleum Associated (WSPA). The manual provides an easy to use reference for evaluating technologies which may be applicable to onsite remediation of soils contaminated with petroleum hydrocarbons, by providing materials in the following three formats: The main text, which provides summaries for each available technology and a screening procedure to identify potentially viable options for specific site conditions; several appendices, which contain detailed descriptions for each technology, and permit requirement summaries for nine western states; and a separate appendix which lists published references and vendor's literature used n preparing the Manual

Computer aided design and management of cables in a nuclear power plant

International Nuclear Information System (INIS)

Pralus, B.

1978-01-01

Specific problems encountered at both design offices and on-site on management of cables for large nuclear power plants are analyzed. These problems, for a large pert planning, come from safety regulations and quality assurance requirements as well. Emphasis is put on the effect of the QA exigences applicable to the organization and execution of cabling management for nuclear power plants. (J.E. de C.)

PORTSMOUTH ON-SITE DISPOSAL CELL HIGH DENSITY POLYETHYLENE GEOMEMBRANE LONGEVITY

Energy Technology Data Exchange (ETDEWEB)

Phifer, M.

2012-01-31

It is anticipated that high density polyethylene (HDPE) geomembranes will be utilized within the liner and closure cap of the proposed On-Site Disposal Cell (OSDC) at the Portsmouth Gaseous Diffusion Plant. The likely longevity (i.e. service life) of HDPE geomembranes in OSDC service is evaluated within the following sections of this report: (1) Section 2.0 provides an overview of HDPE geomembranes, (2) Section 3.0 outlines potential HDPE geomembranes degradation mechanisms, (3) Section 4.0 evaluates the applicability of HDPE geomembrane degradation mechanisms to the Portsmouth OSDC, (4) Section 5.0 provides a discussion of the current state of knowledge relative to the longevity (service life) of HDPE geomembranes, including the relation of this knowledge to the Portsmouth OSDC, and (5) Section 6.0 provides summary and conclusions relative to the anticipated service life of HDPE geomembranes in OSDC service. Based upon this evaluation it is anticipated that the service life of HDPE geomembranes in OSDC service would be significantly greater than the 200 year service life assumed for the OSDC closure cap and liner HDPE geomembranes. That is, a 200 year OSDC HDPE geomembrane service life is considered a conservative assumption.

Portsmouth On-Site Disposal Cell High Density Polyethylene Geomembrane Longevity

International Nuclear Information System (INIS)

Phifer, M.

2012-01-01

It is anticipated that high density polyethylene (HDPE) geomembranes will be utilized within the liner and closure cap of the proposed On-Site Disposal Cell (OSDC) at the Portsmouth Gaseous Diffusion Plant. The likely longevity (i.e. service life) of HDPE geomembranes in OSDC service is evaluated within the following sections of this report: (1) Section 2.0 provides an overview of HDPE geomembranes, (2) Section 3.0 outlines potential HDPE geomembranes degradation mechanisms, (3) Section 4.0 evaluates the applicability of HDPE geomembrane degradation mechanisms to the Portsmouth OSDC, (4) Section 5.0 provides a discussion of the current state of knowledge relative to the longevity (service life) of HDPE geomembranes, including the relation of this knowledge to the Portsmouth OSDC, and (5) Section 6.0 provides summary and conclusions relative to the anticipated service life of HDPE geomembranes in OSDC service. Based upon this evaluation it is anticipated that the service life of HDPE geomembranes in OSDC service would be significantly greater than the 200 year service life assumed for the OSDC closure cap and liner HDPE geomembranes. That is, a 200 year OSDC HDPE geomembrane service life is considered a conservative assumption.

37Ar monitoring techniques and on-site inspection system

International Nuclear Information System (INIS)

Duan Rongliang; Chen Yinliang; Li Wei; Wang Hongxia; Hao Fanhua

2001-01-01

37 Ar is separated, purified and extracted from air sample with a low temperature gas-solid chromatographic purifying method, prepared into a radioactive measurement source and its radioactivity is measured with a proportional counter. Based on the monitoring result, a judgement can be made if an nuclear explosion event has happened recently in a spectabilis area. A series of element techniques that are associated the monitoring of the trace element 37 Ar have been investigated and developed. Those techniques include leaked gas sampling, 37 Ar separation and purification, 37 Ar radioactivity measurement and the on-site inspection of 37 Ar. An advanced 37 Ar monitoring method has been developed, with which 200 liters of air can be treated in 2 hours with sensitivity of 0.01 Bq/L for 37 Ar radioactivity measurement. A practical 37 Ar On-site Inspection system has been developed. This research work may provide technical and equipment support for the verification protection, verification supervision and CTBT verification

Onsite disposal of radioactive waste: Estimating potential groundwater contamination

International Nuclear Information System (INIS)

Goode, D.J.; Neuder, S.M.; Pennifill, R.A.; Ginn, T.

1986-11-01

Volumes 1 and 2 of this report describe the NRC's methodology for assessing the potential public health and environmental impacts associated with onsite disposal of very low activity radioactive materials. This volume (Vol. 3) describes a general methodology for predicting potential groundwater contamination from onsite disposal. The methodology includes formulating a conceptual model, representing the conceptual model mathematically, estimating conservative parameters, and predicting receptor concentrations. Processes which must generally be considered in the methodology include infiltration, leaching of radionuclides from the waste, transport to the saturated zone, transport within the saturated zone, and withdrawal at a receptor location. A case study of shallow burial of iodine-125 illustrates application of the MOCMOD84 version of the US Geological Survey's 2-D solute transport model and a corresponding analytical solution. The appendices include a description and listing of MOCMOD84, descriptions of several analytical solution techniques, and a procedure for estimating conservative groundwater velocity values

Assessment of On-Site Treatment Process of Institutional Building’s Wastewater

Directory of Open Access Journals (Sweden)

Motasem N. Saidan

2018-03-01

Full Text Available This study is conducted to investigate the characteristics of outflow wastewater of the 1 m3 on-site wastewater treatment unit on the basis of the testing and measurement data of the samples that were taken during the study monitored period (August 2017 to January 2018. For this purpose, samples were taken on a weekly basis from the treated wastewater effluent and five quality parameters (biochemical oxygen demand (BOD, chemical oxygen demand (COD, total suspended solids (TSS, pH, E-coli counts were monitored and measured. The average values of the five parameters were compared with the Jordanian standard maximum values, and water reuse in irrigation of plants classifications have been assessed and investigated. Average values of BOD, COD, TSS, pH, and E-coli in treated wastewater were 11 mg/L, 104 mg/L, 15 mg/L, 7.51, and 387 counts, respectively. The installation of in-line ultraviolet (UV unit in recirculating delivery system played a vital role in the reduction of counts far below the permissible maximum level (1000 counts. Based on national and international standards and criteria, results showed that the treated wastewater is suitable for the irrigation of two classifications of plants: (i Fruit trees, road-green sides outside cities, and green landscape; (ii Crops, commercial crops, and forest trees. Hence, such very low water flow rate treatment system can be utilized in refugees’ camps and water scarce residential areas in Jordan.

75 FR 55613 - Dupont Teijin Films Including On-Site Leased Workers From Schenkers Logistics, Inc., Florence, SC...

Science.gov (United States)

2010-09-13

... Including On-Site Leased Workers From Schenkers Logistics, Inc., Florence, SC; Amended Certification... Teijin Films, including on-site leased workers from Schenkers Logistics, Inc., Florence, South Carolina... leased workers of Schenkers Logistics, Inc., Florence, South Carolina, who became totally or partially...

Quantity assessment of waste in the dismantlement of liquid waste treatment plant and its actual state

International Nuclear Information System (INIS)

Uchiyama, Takafumi; Mitsuhashi, Ishi; Matsumoto, Tetsuo; Morishima, Kayoko; Tanzawa, Tomio

2016-01-01

From the progress of decommissioning project work of Tokyo City University Atomic Energy Research Institute, this paper reports the comparison between the actual amount of the waste generated during dismantlement work at liquid waste treatment facilities and the assessment quantity before starting the dismantlement. The quantity assessment was made on the basis of the installation license application, design specifications, drawings, records, history of use, site investigation results, etc. Since this quantity assessment did not take into account the dismantling contents of reservoir concrete, the assessed quantity of non-radioactive waste (NR waste) did not match the sum of actual NR waste. However, if an actually generated quantity of concrete of radioactive waste was added to the quantity assessment as NR waste, the quantity of actually generated NR waste and that of assessed NR waste were nearly consistent, which verified the validity of this assessment. This method is considered to be able to be utilized in the future quantity assessment of decommissioning work and the like. On the other hand, it was found that the number of drums that were actually stored tended to increase more than the estimated number of drum conversion. In old buildings, it is necessary to take into account the generation of waste other than radioactive materials in the quantity assessment stage and dismantlement stage. (A.O.)

Consideration of Command and Control Performance during Accident Management Process at the Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Nisrene M. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Sok Chul [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

The accident at the Fukushima Daiichi nuclear power plants shifted the nuclear safety paradigm from risk management to on-site management capability during a severe accident. The kernel of on-site management capability during an accident at a nuclear power plant is situation awareness and agility of command and control. However, little consideration has been given to accident management. After the events of September 11, 2001 and the catastrophic Fukushima nuclear disaster, agility of command and control has emerged as a significant element for effective and efficient accident management, with many studies emphasizing accident management strategies, particularly man-machine interface, which is considered a key role in ensuring nuclear power plant safety during severe accident conditions. This paper proposes a conceptual model for evaluating command and control performance during the accident management process at a nuclear power plant. Communication and information processing while responding to an accident is one of the key issues needed to mitigate the accident. This model will give guidelines for accurate and fast communication response during accident conditions.

On-site and off-site forensic analysis capabilities for proliferation and terrorism prevention

International Nuclear Information System (INIS)

Whipple, R.E.; Nunes, P.J.; Reynolds, J.G.; Alcaraz, A.; Hart, B.R.

2004-01-01

Full text: We will present current on-site technologies that can be utilized for the screening of explosives, chemical agents, and environmental contaminants. These techniques must have the capability to detect various hazardous materials at very low levels, since they pose a major challenge for first responders. Specifically, the technology must detect concealed explosives or chemical agents on-site rapidly. Lawrence Livermore National Laboratory (LLNL) is currently developing several different high explosive screening and detection technologies for field use. Two technologies that have demonstrated an ability to screen for explosives at low levels are colorimetric spot tests and thin layer chromatography (TLC). Another technology that has demonstrated usefulness for the on-site analysis of unknowns is portable gas chromatography-mass spectrometry (GC-MS) with solid phase micro-extraction (SPME) sampling. Several examples utilizing these technologies and their usefulness will be presented. In addition to developing on-site screening methods, LLNL is an Organization for the Prohibition of Chemical Weapons (OPCW) designated laboratory and is certified to accept CW suspect samples. Currently, LLNL is expanding its ISO-17025 certification to include nuclear forensics and explosives. These off-site forensic analysis capabilities and certified procedures will support the needs for homeland security. We will highlight some of the ISO-17025 requirements to accredit procedures, handle samples, and reports. Work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract W-7405-ENG-48

On-site and off-site forensic analysis capabilities for proliferation and terrorism prevention

International Nuclear Information System (INIS)

Hart, B.R.; Whipple, R.E.; Nunes, P.J.; Reynolds, J.G.; Alcaraz, A.

2004-01-01

We present current on-site technologies that can be utilized for the screening of explosives, chemical agents, and environmental contaminants. These techniques must have the capability to detect various hazardous materials at very low levels, since they pose a major challenge for first responders. Specifically, the technology must detect concealed explosives or chemical agents on-site rapidly. Lawrence Livermore National Laboratory (LLNL) is currently developing several different high explosive screening and detection technologies for field use. Two technologies that have demonstrated an ability to screen for explosives at low levels are colorimetric spot tests and thin layer chromatography (TLC). Another technology that has demonstrated usefulness for the on-site analysis of unknowns is portable gas chromatography-mass spectrometry (GC-MS) with solid phase micro-extraction (SPME) sampling. Several examples utilizing these technologies and their usefulness will be presented. In addition to developing on-site screening methods, LLNL is an Organization for the Prohibition of Chemical Weapons (OPCW) designated laboratory and is certified to accept CW suspect samples. Currently, LLNL is expanding its ISO-17025 certification to include nuclear forensics and explosives. These off-site forensic analysis capabilities and certified procedures will support the needs for homeland security. We will highlight some of the ISO-17025 requirements to accredit procedures, handle samples, and reports. Work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract W-7405-ENG-48. (author)

78 FR 21155 - Eastman Kodak Company, IPS-Dayton Location, Including On-site Leased Workers From Adecco, Dayton...

Science.gov (United States)

2013-04-09

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,387] Eastman Kodak Company, IPS--Dayton Location, Including On-site Leased Workers From Adecco, Dayton, Ohio; Notice of... and former workers of Eastman Kodak Company, IPS--Dayton Location, including on-site leased workers...

75 FR 38128 - Ceva Freight, LLC, Dell Logistics Division, Including On-Site Leased Workers From Prologistix and...

Science.gov (United States)

2010-07-01

... Logistics Division, Including On-Site Leased Workers From Prologistix and Employment Staffing Solutions... 19, 2010, applicable to workers of CEVA Freight, LLC, Dell Logistics Division, including on-site..., North Carolina location of CEVA Freight, LLC, Dell Logistics Division. The Department has determined...

Artificial neural network for on-site quantitative analysis of soils using laser induced breakdown spectroscopy

Energy Technology Data Exchange (ETDEWEB)

El Haddad, J. [Univ. Bordeaux, LOMA, UMR 5798, F-33400 Talence (France); CNRS, LOMA, UMR 5798, F-33400 Talence (France); Villot-Kadri, M.; Ismaël, A.; Gallou, G. [IVEA Solution, Centre Scientifique d' Orsay, Bât 503, 91400 Orsay (France); Michel, K.; Bruyère, D.; Laperche, V. [BRGM, Service Métrologie, Monitoring et Analyse, 3 avenue Claude Guillemin, B.P 36009, 45060 Orléans Cedex (France); Canioni, L. [Univ. Bordeaux, LOMA, UMR 5798, F-33400 Talence (France); CNRS, LOMA, UMR 5798, F-33400 Talence (France); Bousquet, B., E-mail: bruno.bousquet@u-bordeaux1.fr [Univ. Bordeaux, LOMA, UMR 5798, F-33400 Talence (France); CNRS, LOMA, UMR 5798, F-33400 Talence (France)

2013-01-01

Nowadays, due to environmental concerns, fast on-site quantitative analyses of soils are required. Laser induced breakdown spectroscopy is a serious candidate to address this challenge and is especially well suited for multi-elemental analysis of heavy metals. However, saturation and matrix effects prevent from a simple treatment of the LIBS data, namely through a regular calibration curve. This paper details the limits of this approach and consequently emphasizes the advantage of using artificial neural networks well suited for non-linear and multi-variate calibration. This advanced method of data analysis is evaluated in the case of real soil samples and on-site LIBS measurements. The selection of the LIBS data as input data of the network is particularly detailed and finally, resulting errors of prediction lower than 20% for aluminum, calcium, copper and iron demonstrate the good efficiency of the artificial neural networks for on-site quantitative LIBS of soils. - Highlights: ► We perform on-site quantitative LIBS analysis of soil samples. ► We demonstrate that univariate analysis is not convenient. ► We exploit artificial neural networks for LIBS analysis. ► Spectral lines other than the ones from the analyte must be introduced.

Artificial neural network for on-site quantitative analysis of soils using laser induced breakdown spectroscopy

International Nuclear Information System (INIS)

El Haddad, J.; Villot-Kadri, M.; Ismaël, A.; Gallou, G.; Michel, K.; Bruyère, D.; Laperche, V.; Canioni, L.; Bousquet, B.

2013-01-01

Nowadays, due to environmental concerns, fast on-site quantitative analyses of soils are required. Laser induced breakdown spectroscopy is a serious candidate to address this challenge and is especially well suited for multi-elemental analysis of heavy metals. However, saturation and matrix effects prevent from a simple treatment of the LIBS data, namely through a regular calibration curve. This paper details the limits of this approach and consequently emphasizes the advantage of using artificial neural networks well suited for non-linear and multi-variate calibration. This advanced method of data analysis is evaluated in the case of real soil samples and on-site LIBS measurements. The selection of the LIBS data as input data of the network is particularly detailed and finally, resulting errors of prediction lower than 20% for aluminum, calcium, copper and iron demonstrate the good efficiency of the artificial neural networks for on-site quantitative LIBS of soils. - Highlights: ► We perform on-site quantitative LIBS analysis of soil samples. ► We demonstrate that univariate analysis is not convenient. ► We exploit artificial neural networks for LIBS analysis. ► Spectral lines other than the ones from the analyte must be introduced

Improvement of Endovascular Stroke Treatment: A 24-Hour Neuroradiological On-Site Service Is Not Enough

Directory of Open Access Journals (Sweden)

Omid Nikoubashman

2018-01-01

Full Text Available Background and Purpose. With the advent of endovascular stroke treatment (EST with mechanical thrombectomy, stroke treatment has also become more challenging. Purpose of this study was to investigate whether a fulltime neuroradiological on-site service and workflow optimization with a structured documentation of the interdisciplinary stroke workflow resulted in improved procedural times. Material and Methods. Procedural times of 322 consecutive patients, who received EST (1 before (n=96 and (2 after (n=126 establishing a 24-hour neuroradiological on-site service as well as (3 after implementation of a structured interdisciplinary workflow documentation (“Stroke Check” (n=100, were analysed. Results. A fulltime neuroradiological on-site service resulted in a nonsignificant improvement of procedural times during out-of-hours admissions (p≥0.204. Working hours and out-of-hours procedural times improved significantly, if additional workflow optimization was realized (p≤0.026. Conclusions. A 24-hour interventional on-site service is a major prerequisite to adequately provide modern reperfusion therapies in patients with acute ischemic stroke. However, simple measures like standardized and focused documentation that affect the entire interdisciplinary pre- and intrahospital stroke rescue chain seem to be important.

Long-term leach rates of glasses containing actual waste

International Nuclear Information System (INIS)

Wiley, J.R.; LeRoy, J.H.

1979-01-01

Leach rates of borosilicate glasses that contained actual Savannah River Plant waste were measured. Leaching was done by water and by buffer solutions of pH 4, 7, and 9. Leach rates were then determined from the amount of 137 Cs, 90 Sr, and plutonium released into the leach solutions. The cumulative fractions leached were fit to a mathematical model that included leaching by diffusion and glass dissolution. 5 figures, 3 tables

Compact solitary waves in linearly elastic chains with non-smooth on-site potential

Energy Technology Data Exchange (ETDEWEB)

Gaeta, Giuseppe [Dipartimento di Matematica, Universita di Milano, Via Saldini 50, 20133 Milan (Italy); Gramchev, Todor [Dipartimento di Matematica e Informatica, Universita di Cagliari, Via Ospedale 72, 09124 Cagliari (Italy); Walcher, Sebastian [Lehrstuhl A Mathematik, RWTH Aachen, 52056 Aachen (Germany)

2007-04-27

It was recently observed by Saccomandi and Sgura that one-dimensional chains with nonlinear elastic interaction and regular on-site potential can support compact solitary waves, i.e. travelling solitary waves with strictly compact support. In this paper, we show that the same applies to chains with linear elastic interaction and an on-site potential which is continuous but non-smooth at minima. Some different features arise; in particular, the speed of compact solitary waves is not uniquely fixed by the equation. We also discuss several generalizations of our findings.

Wastewater control report for the Oak Ridge Y-12 Plant

International Nuclear Information System (INIS)

1996-06-01

The 1995 National Pollutant Discharge Elimination System (NPDES) permit for the Y-12 Plant (Part III-F, page 41) requires the preparation of a report to describe procedures and criteria used in operating on-site treatment systems to maintain compliance with the NPDES permit. This report has been prepared to fulfill this requirement. Five wastewater treatment systems are currently in operation at the Y-12 Plant; they are operated by personal in the Waste Management and Facilities Management Organizations

A Comparison of Online versus On-site Training in Health Research Methodology: A Randomized Study

Directory of Open Access Journals (Sweden)

Kanchanaraksa Sukon

2011-06-01

Full Text Available Abstract Background Distance learning may be useful for building health research capacity. However, evidence that it can improve knowledge and skills in health research, particularly in resource-poor settings, is limited. We compared the impact and acceptability of teaching two distinct content areas, Biostatistics and Research Ethics, through either on-line distance learning format or traditional on-site training, in a randomized study in India. Our objective was to determine whether on-line courses in Biostatistics and Research Ethics could achieve similar improvements in knowledge, as traditional on-site, classroom-based courses. Methods Subjects: Volunteer Indian scientists were randomly assigned to one of two arms. Intervention: Students in Arm 1 attended a 3.5-day on-site course in Biostatistics and completed a 3.5-week on-line course in Research Ethics. Students in Arm 2 attended a 3.5-week on-line course in Biostatistics and 3.5-day on-site course in Research Ethics. For the two course formats, learning objectives, course contents and knowledge tests were identical. Main Outcome Measures: Improvement in knowledge immediately and 3-months after course completion, compared to baseline. Results Baseline characteristics were similar in both arms (n = 29 each. Median knowledge score for Biostatistics increased from a baseline of 49% to 64% (p Conclusion On-line and on-site training formats led to marked and similar improvements of knowledge in Biostatistics and Research Ethics. This, combined with logistical and cost advantages of on-line training, may make on-line courses particularly useful for expanding health research capacity in resource-limited settings.

Evaluation of radwaste minimization program of dry and wet active waste in the Laguna Verde Nuclear Power Plant

International Nuclear Information System (INIS)

Luna-Garza, Hector

2001-01-01

A growing rate of radwaste volume production combined with an increase of both, costs and associated dose involved in its treatment and disposition processes have created a serious problem to the Laguna Verde Nuclear Power Plant (BWR, two Units, 682 Mwe each) in Mexico. Due the lack of a Final Repository in the country, the solution in the short or long terms relies on the success of a continuous and aggressive minimization program mainly based on modifications and upgrades applied to these processes. Technical and administrative strategies adopted by LVNPP for the reduction of Liquid Effluents and Dry and Wet Active Waste in the next three years are described. Based on the results of the LVNPP current radwaste process systems, an estimated accumulation of 11,502 m 3 by the year 2035 will exceed the actual on-site storage capacity. If the strategies succeed, this production would fall to an expected manageable volume of 4067 m 3 . (author)

Criteria for onsite transfers of radioactive material

International Nuclear Information System (INIS)

Opperman, E.K.; Jackson, E.J.; Eggers, A.G.

1992-01-01

A general description of the requirements for making onsite transfers of radioactive material is provided in Chapter 2, along with the required sequencey of activities. Various criteria for package use are identified in Chapters 3-13. These criteria provide protection against undue radiation exposure. Package shielding, containment, and surface contamination requirements are established. Criteria for providing criticality safety are enumerated in Chapter 6. Criteria for providing hazards information are established in Chapter 13. A glossary is provided

76 FR 62452 - Avon Products, Inc. Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH...

Science.gov (United States)

2011-10-07

.... Including On-Site Leased Workers From Spherion/Source Right, Springdale, OH; Amended Certification Regarding... workers of the subject firm. The company reports that workers leased from Spherion/Source Right were...., including on-site leased workers from Spherion/Source Right, Springdale, Ohio, who became totally or...

75 FR 45166 - Jeld-Wen, Inc., Hawkins Window Division, Including On-Site Leased Workers of Nicolet Staffing...

Science.gov (United States)

2010-08-02

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,014] Jeld-Wen, Inc., Hawkins Window Division, Including On-Site Leased Workers of Nicolet Staffing, Hawkins, WI; Notice of Negative...., Hawkins Window Division, including on-site leased workers of Nicolet Staffing, Hawkins, Wisconsin. Signed...

78 FR 61389 - Sanyo Solar of Oregon, LLC, Wafer Slicing and Quality Control Operations, Including On-Site...

Science.gov (United States)

2013-10-03

..., LLC, Wafer Slicing and Quality Control Operations, Including On-Site Leased Workers From Brown and... Quality Control Operations, Salem, Oregon, including on-site leased workers from Brown and Dunton, Inc... and included workers who supplied quality control and support functions. The company reports that...

76 FR 61741 - Bmc Software, Inc. Including On-Site Leased Workers From COMSYS ITS Including Remote Workers...

Science.gov (United States)

2011-10-05

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,540] Bmc Software, Inc... November 23, 2010, applicable to workers of BMC Software, Inc., including on-site leased workers from... BMC Software, inc., including on-site leased workers from Comsys ITS, and including remote workers...

Pendekatan Pelatihan On-Site dan Step by Step untuk Optimalisasi Fungsi Guru dalam Pembelajaran

OpenAIRE

Moch. Sholeh Y.A. Ichrom

2016-01-01

Remoteness of programme content from teachers' real work situation and unsuitability of approach employed were suspected as main reasons contributing to the failure of many inservise teacher training programmes. A step by step, onsite teacher training (SSOTT) model was tried out in this experiment to study if the weakness of inservise programmes could be rectified. As it was tried out in relation with kindergarten mathemathics it was then called SSOTT-MTW (Step by Step Onsite Teacher Training...

Pendekatan Pelatihan On-Site Dan Step by Step Untuk Optimalisasi Fungsi Guru Dalam Pembelajaran

OpenAIRE

Ichrom, Moch. Sholeh Y.A

1996-01-01

Remoteness of programme content from teachers' real work situation and unsuitability of approach employed were suspected as main reasons contributing to the failure of many inservise teacher training programmes. A step by step, onsite teacher training (SSOTT) model was tried out in this experiment to study if the weakness of inservise programmes could be rectified. As it was tried out in relation with kindergarten mathemathics it was then called SSOTT-MTW (Step by Step Onsite Teacher Training...

Comparison and Evaluation of Large-Scale and On-Site Recycling Systems for Food Waste via Life Cycle Cost Analysis

Directory of Open Access Journals (Sweden)

Kyoung Hee Lee

2017-11-01

Full Text Available The purpose of this study was to evaluate the cost-benefit of on-site food waste recycling system using Life-Cycle Cost analysis, and to compare with large-scale treatment system. For accurate evaluation, the cost-benefit analysis was conducted with respect to local governments and residents, and qualitative environmental improvement effects were quantified. As for the local governments, analysis results showed that, when large-scale treatment system was replaced with on-site recycling system, there was significant cost reduction from the initial stage depending on reduction of investment, maintenance, and food wastewater treatment costs. As for the residents, it was found that the cost incurred from using the on-site recycling system was larger than the cost of using large-scale treatment system due to the cost of producing and installing the on-site treatment facilities at the initial stage. However, analysis showed that with continuous benefits such as greenhouse gas emission reduction, compost utilization, and food wastewater reduction, cost reduction would be obtained after 6 years of operating the on-site recycling system. Therefore, it was recommended for local governments and residents to consider introducing an on-site food waste recycling system if they are to replace an old treatment system or need to establish a new one.

Concept of a HTR modular plant for generation of process heat in a chemical plant

International Nuclear Information System (INIS)

1991-07-01

This final report summarizes the results of a preliminary study on behalf of Buna AG and Leunawerke AG. With regard to the individual situations the study investigated the conditions for modular HTR-2 reactors to cover on-site process heat and electric power demands. HTR-2 reactor erection and operation were analyzed for their economic efficiency compared with fossil-fuel power plants. Considering the prospective product lines, the technical and economic conditions were developed in close cooperation with Buna AG and Leunawerke AG. The study focused on the technical integration of modular HTR reactors into plants with regard to safety concepts, on planning, acceptance and erection concepts which largely exclude uncalculable scheduling and financial risks, and on comparative economic analyses with regard to fossil-fuel power plants. (orig.) [de

Analytical investigation of the thermal optimization of biogas plants

International Nuclear Information System (INIS)

Knauer, Thomas; Scholwin, Frank; Nelles, Michael

2015-01-01

The economic efficiency of biogas plants is more difficult to display with recent legal regulations than with bonus tariff systems of previous EEG amendments. To enhance efficiency there are different options, often linked with further investments. Direct technical innovations with fast economic yields need exact evaluation of limiting conditions. Within this article the heat sector of agricultural biogas plants is studied. So far scarcely considered, especially the improvement of on-site thermal energy consumption promises a high optimisation. Data basis are feeding protocols and temperature measurements of input substrates, biogas, environment etc., also documentations of on-site thermal consumption over 10 years. Analyzing first results of measurements and primary equilibrations shows, that maintenance of biogas process temperature consumes most thermal energy and therefore has the greatest potential of improvement. Passive and active insulation of feed systems and heat recovery from secondary fermenter liquids are identified as first optimization measures. Depending on amount and temperature raise of input substrates, saving potentials of more than hundred megawatt hours per year were calculated.

Fatigue status assessment for reactor pressure vessel based on actual operational transient

International Nuclear Information System (INIS)

Zhu Guangqiang; Liao Changbin; Dai Bing; Gui Chun

2013-01-01

Background: Fatigue is an important aging mechanism in RPV and it must be contained to aging management working range. Purpose: In order to ensure the safety operation of nuclear power plants, as extension of RPV service time, it is necessary to assess the fatigue damage caused by actual operation transient. Methods: Based on monitoring data of actual operation during the past eleven years, refer to design transient, the statistic analysis for types and occurrence times of actual transient is carried out, at the same time, every transients are combined as different operation cycles and the temperature field and stress field of typical components are analyzed by FEM. Results: Based on these information, fatigue analysis and assessment are finished, if later-actual transients are similar with the previous transients, the calculation result shows that the ratio between maximum of cumulative usage factors and design calculation value is 0.4967 the design transients is conservative. Conclusions: Fatigue status of RPV could be assessed and traced quickly through fatigue status assessment method in this paper based on actual operational transient and assessment result would be a good reference for RPV aging management. (authors)

76 FR 16447 - ETHICON, a Subsidiary of Johnson & Johnson Including On-Site Leased Workers From Kelly Temporary...

Science.gov (United States)

2011-03-23

... workers of ETHICON, A Johnson and Johnson Company, San Angelo, Texas, separated from employment on or... Johnson & Johnson Including On-Site Leased Workers From Kelly Temporary Services, San Angelo, TX; Amended... of ETHICON, a subsidiary of Johnson & Johnson, including on-site leased workers from Kelly Temporary...

75 FR 5147 - Acushnet Company a Subsidiary of Fortune Brands Including On-Site Leased Workers From Olsten...

Science.gov (United States)

2010-02-01

...,763B] Acushnet Company a Subsidiary of Fortune Brands Including On-Site Leased Workers From Olsten Staffing Services Fairhaven, MA; Acushnet Company a Subsidiary of Fortune Brands Including On-Site Leased Workers From Olsten Staffing Services New Bedford, MA; Acushnet Company a Subsidiary of Fortune Brands...

[On-site quality control of acupuncture randomized controlled trial: design of content and checklist of quality control based on PICOST].

Science.gov (United States)

Li, Hong-Jiao; He, Li-Yun; Liu, Zhi-Shun; Sun, Ya-Nan; Yan, Shi-Yan; Liu, Jia; Zhao, Ye; Liu, Bao-Yan

2014-02-01

To effectively guarantee quality of randomized controlld trial (RCT) of acupuncture and develop reasonable content and checklist of on-site quality control, influencing factors on quality of acupuncture RCT are analyzed and scientificity of quality control content and feasibility of on-site manipulation are put into overall consideration. Based on content and checklist of on-site quality control in National 11th Five-Year Plan Project Optimization of Comprehensive Treatment Plan for TCM in Prevention and Treatment of Serious Disease and Clinical Assessment on Generic Technology and Quality Control Research, it is proposed that on-site quality control of acupuncture RCT should be conducted with PICOST (patient, intervention, comparison, out come, site and time) as core, especially on quality control of interveners' skills and outcome assessment of blinding, and checklist of on-site quality control is developed to provide references for undertaking groups of the project.

Plant specific severe accident management - the implementation phase

International Nuclear Information System (INIS)

Prior, R.

1999-01-01

Many plants are in the process of developing on-site guidance for technical staff to respond to a severe accident situation severe accident management guidance (SAMG). Once the guidance is developed, the SAMG must be implemented at the plant site, and this involves addressing a number of additional aspects. In this paper, approaches to this implementation phase are reviewed, including review and verification of plant specific SAMG, organizational aspects and integration with the emergency plan, training of SAMG users, validation and self-assessment and SAMG maintenance. Examples draw on experience from assisting numerous plants to implement symptom based severe accident management guidelines based on the Westinghouse Owners Group approach, in Westinghouse, non-Westinghouse and VVER plant types. It is hoped that it will be of use to those plant operators about to perform these activities.(author)

Community emergency response to nuclear power plant accidents: A selected and partially annotated bibliography

Energy Technology Data Exchange (ETDEWEB)

Youngen, G.

1988-10-01

The role of responding to emergencies at nuclear power plants is often considered the responsibility of the personnel onsite. This is true for most, if not all, of the incidents that may happen during the course of the plant`s operating lifetime. There is however, the possibility of a major accident occurring at anytime. Major nuclear accidents at Chernobyl and Three Mile Island have taught their respective countries and communities a significant lesson in local emergency preparedness and response. Through these accidents, the rest of the world can also learn a great deal about planning, preparing and responding to the emergencies unique to nuclear power. This bibliography contains books, journal articles, conference papers and government reports on emergency response to nuclear power plant accidents. It does not contain citations for ``onsite`` response or planning, nor does it cover the areas of radiation releases from transportation accidents. The compiler has attempted to bring together a sampling of the world`s collective written experience on dealing with nuclear reactor accidents on the sate, local and community levels. Since the accidents at Three Mile Island and Chernobyl, that written experience has grown enormously.

On-site electric power source facility for Japanese nuclear power plant

International Nuclear Information System (INIS)

Oohara, T.

1986-01-01

Trends of construction of nuclear power plants in Japan, occurrence rate of incidents/failures of electric facilities, major example of incidents/failures, their countermeasure to prevent recurrence are introduced. Furthermore, safety administration system of the Government, electric utilities and manufacturers, and various countermeasures to prevent incident/ failure of electrical facilities from the hardware and software sides are discussed. (author)

On-site electric power source facility for Japanese nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Oohara, T. [Incident/Failure Analysis and Evaluation Office, Nuclear Power Safety Information Research Centre, Nuclear Power Engineering Test Centre, 2nd Floor, Shuwa-Kamiyacho Bldg., 3-13, 4-Chome, Toranomon Minato-ku, Tokyo 105 (Japan)

1986-02-15

Trends of construction of nuclear power plants in Japan, occurrence rate of incidents/failures of electric facilities, major example of incidents/failures, their countermeasure to prevent recurrence are introduced. Furthermore, safety administration system of the Government, electric utilities and manufacturers, and various countermeasures to prevent incident/ failure of electrical facilities from the hardware and software sides are discussed. (author)

Hanford Waste Vitrification Plant technology progress

International Nuclear Information System (INIS)

Wolfe, B.A.; Scott, J.L.; Allen, C.R.

1989-10-01

The Hanford Waste Vitrification Plant (HWVP) is currently being designed to safely process and temporarily store immobilized defense liquid high-level wastes from the Hanford Site. These wastes will be immobilized in a borosilicate glass waste form in the HWVP and stored onsite until a qualified geologic waste repository is ready for permanent disposal. Because of the diversity of wastes to be disposed of, specific technical issues are being addressed so that the plant can be designed and operated to produce a waste form that meets the requirements for permanent disposal in a geologic repository. This paper reports the progress to date in addressing these issues. 2 figs., 3 tabs

Comparison of conventional vs. modular hydrogen refueling stations and on-site production vs. delivery.

Energy Technology Data Exchange (ETDEWEB)

Hecht, Ethan S. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Pratt, Joseph William [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2017-03-01

To meet the needs of public and private stakeholders involved in the development, construction, and operation of hydrogen fueling stations needed to support the widespread roll-out of hydrogen fuel cell electric vehicles, this work presents publicly available station templates and analyses. These ‘Reference Stations’ help reduce the cost and speed the deployment of hydrogen stations by providing a common baseline with which to start a design, enable quick assessment of potential sites for a hydrogen station, identify contributors to poor economics, and suggest areas of research. This work presents layouts, bills of materials, piping and instrumentation diagrams, and detailed analyses of five new station designs. In the near term, delivered hydrogen results in a lower cost of hydrogen compared to on-site production via steam methane reforming or electrolysis, although the on-site production methods have other advantages. Modular station concepts including on-site production can reduce lot sizes from conventional assemble-on-site stations.

On-site storage of spent nuclear fuel assemblies in German nuclear power plants

International Nuclear Information System (INIS)

Banck, J.

1999-01-01

The selection of back-end strategies for spent fuel assemblies is influenced by a number of different factors depending on the given situation in any specific country. In Germany, the back-end strategy implemented in the past was almost exclusively reprocessing. This strategy was required by the German Atomic Energy Act. Since 1994, when the Atomic Energy Act was amended, the option of direct final disposal has been granted the equivalent status by law to that afforded to reprocessing (and reuse of valuable materials). As a result, German utilities may now choose between these two alternatives. Another important condition for optimizing the back-end policy is the fact that fuel cycle costs in Germany are directly dependent on spent fuel volumes (in contrast to the US, for example, such costs are related to the amount of power generated). Another boundary condition for German utilities with respect to spent fuel management is posed by the problems with militant opponents of nuclear energy during transportation of spent fuel to interim storage sites. These facts have given rise to a reconsideration of the fuel cycle back-end, which has resulted in a change in strategy by most German utilities in favour of the following: Preference for long-term storage and maximized use of on-site storage capacity; Reduction in the amount of spent fuel by increasing burnup as much as possible. These decisions have also been driven by the deregulation of energy markets in Europe, where utilities are now permitted to sell electric power to consumers beyond their original supply network and must therefore offer electric power on a very cost competitive basis. (author)

Decision precision or holistic heuristic?: Insights on on-site selection of student nurses and midwives.

Science.gov (United States)

Macduff, Colin; Stephen, Audrey; Taylor, Ruth

2016-01-01

Concerns about quality of care delivery in the UK have led to more scrutiny of criteria and methods for the selection of student nurses. However few substantive research studies of on-site selection processes exist. This study elicited and interpreted perspectives on interviewing processes and related decision making involved in on-site selection of student nurses and midwives. Individual and focus group interviews were undertaken with 36 lecturers, 5 clinical staff and 72 students from seven Scottish universities. Enquiry focused primarily on interviewing of candidates on-site. Qualitative content analysis was used as a primary strategy, followed by in-depth thematic analysis. Students had very mixed experiences of interview processes. Staff typically took into account a range of candidate attributes that they valued in order to achieve holistic assessments. These included: interpersonal skills, team working, confidence, problem-solving, aptitude for caring, motivations, and commitment. Staff had mixed views of the validity and reliability of interview processes. A holistic heuristic for overall decision making predominated over belief in the precision of, and evidence base for, particular attribute measurement processes. While the development of measurement tools for particular attributes continues apace, tension between holism and precision is likely to persist within on-site selection procedures. Copyright © 2015 Elsevier Ltd. All rights reserved.

Portable Infrared Laser Spectroscopy for On-site Mycotoxin Analysis

Science.gov (United States)

Sieger, Markus; Kos, Gregor; Sulyok, Michael; Godejohann, Matthias; Krska, Rudolf; Mizaikoff, Boris

2017-03-01

Mycotoxins are toxic secondary metabolites of fungi that spoil food, and severely impact human health (e.g., causing cancer). Therefore, the rapid determination of mycotoxin contamination including deoxynivalenol and aflatoxin B1 in food and feed samples is of prime interest for commodity importers and processors. While chromatography-based techniques are well established in laboratory environments, only very few (i.e., mostly immunochemical) techniques exist enabling direct on-site analysis for traders and manufacturers. In this study, we present MYCOSPEC - an innovative approach for spectroscopic mycotoxin contamination analysis at EU regulatory limits for the first time utilizing mid-infrared tunable quantum cascade laser (QCL) spectroscopy. This analysis technique facilitates on-site mycotoxin analysis by combining QCL technology with GaAs/AlGaAs thin-film waveguides. Multivariate data mining strategies (i.e., principal component analysis) enabled the classification of deoxynivalenol-contaminated maize and wheat samples, and of aflatoxin B1 affected peanuts at EU regulatory limits of 1250 μg kg-1 and 8 μg kg-1, respectively.

The On-Site Analysis of the Cherenkov Telescope Array

CERN Document Server

Bulgarelli, Andrea; Zoli, Andrea; Aboudan, Alessio; Rodríguez-Vázquez, Juan José; De Cesare, Giovanni; De Rosa, Adriano; Maier, Gernot; Lyard, Etienne; Bastieri, Denis; Lombardi, Saverio; Tosti, Gino; Bergamaschi, Sonia; Beneventano, Domenico; Lamanna, Giovanni; Jacquemier, Jean; Kosack, Karl; Antonelli, Lucio Angelo; Boisson, Catherine; Borkowski, Jerzy; Buson, Sara; Carosi, Alessandro; Conforti, Vito; Colomé, Pep; Reyes, Raquel de los; Dumm, Jon; Evans, Phil; Fortson, Lucy; Fuessling, Matthias; Gotz, Diego; Graciani, Ricardo; Gianotti, Fulvio; Grandi, Paola; Hinton, Jim; Humensky, Brian; Inoue, Susumu; Knödlseder, Jürgen; Flour, Thierry Le; Lindemann, Rico; Malaguti, Giuseppe; Markoff, Sera; Marisaldi, Martino; Neyroud, Nadine; Nicastro, Luciano; Ohm, Stefan; Osborne, Julian; Oya, Igor; Rodriguez, Jerome; Rosen, Simon; Ribo, Marc; Tacchini, Alessandro; Schüssler, Fabian; Stolarczyk, Thierry; Torresi, Eleonora; Testa, Vincenzo; Wegner, Peter

2015-01-01

The Cherenkov Telescope Array (CTA) observatory will be one of the largest ground-based very high-energy gamma-ray observatories. The On-Site Analysis will be the first CTA scientific analysis of data acquired from the array of telescopes, in both northern and southern sites. The On-Site Analysis will have two pipelines: the Level-A pipeline (also known as Real-Time Analysis, RTA) and the level-B one. The RTA performs data quality monitoring and must be able to issue automated alerts on variable and transient astrophysical sources within 30 seconds from the last acquired Cherenkov event that contributes to the alert, with a sensitivity not worse than the one achieved by the final pipeline by more than a factor of 3. The Level-B Analysis has a better sensitivity (not be worse than the final one by a factor of 2) and the results should be available within 10 hours from the acquisition of the data: for this reason this analysis could be performed at the end of an observation or next morning. The latency (in part...

Safety analysis report for packaging (onsite) steel drum

International Nuclear Information System (INIS)

McCormick, W.A.

1998-01-01

This Safety Analysis Report for Packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the steel drum packaging system meets the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments, for an onsite packaging containing Type B quantities of solid and liquid radioactive materials. The basic component of the steel drum packaging system is the 208 L (55-gal) steel drum

Were mercury emission factors for Chinese non-ferrous metal smelters overestimated? Evidence from onsite measurements in six smelters

International Nuclear Information System (INIS)

Zhang Lei; Wang Shuxiao; Wu Qingru; Meng Yang; Yang Hai; Wang Fengyang; Hao Jiming

2012-01-01

Non-ferrous metal smelting takes up a large proportion of the anthropogenic mercury emission inventory in China. Zinc, lead and copper smelting are three leading sources. Onsite measurements of mercury emissions were conducted for six smelters. The mercury emission factors were 0.09–2.98 g Hg/t metal produced. Acid plants with the double-conversion double-absorption process had mercury removal efficiency of over 99%. In the flue gas after acid plants, 45–88% was oxidized mercury which can be easily scavenged in the flue gas scrubber. 70–97% of the mercury was removed from the flue gas to the waste water and 1–17% to the sulfuric acid product. Totally 0.3–13.5% of the mercury in the metal concentrate was emitted to the atmosphere. Therefore, acid plants in non-ferrous metal smelters have significant co-benefit on mercury removal, and the mercury emission factors from Chinese non-ferrous metal smelters were probably overestimated in previous studies. - Highlights: ► Acid plants in smelters provide significant co-benefits for mercury removal (over 99%). ► Most of the mercury in metal concentrates for smelting ended up in waste water. ► Previously published emission factors for Chinese metal smelters were probably overestimated. - Acid plants in smelters have high mercury removal efficiency, and thus mercury emission factors for Chinese non-ferrous metal smelters were probably overestimated.

Contribution of the ergonomic analysis to the improvement of the design of operating procedures in nuclear power plants

International Nuclear Information System (INIS)

Dien, Y.; Montmayeul, R.

1992-11-01

The design of operating procedures for continuous processes is much too often based on implicit assumptions both concerning the operators and the operating conditions that must be dealt with. The merit of the ergonomic approach to the design of procedures is to take account of the way the various operators actually use operating procedures. The actual use is determined from the analysis of on-site operation (normal and incident operating conditions) and the analysis of full-scale simulators tests (incident operating conditions). The introduction of the ergonomic approach in the procedure design results in new design principles being proposed

Who is Self-Actualized?

Science.gov (United States)

Roweton, William E.

1981-01-01

In an attempt to clarify Maslow's concept of self-actualization as it relates to human motivation, a class of educational psychology students wrote essays describing a self-actualized person and then attempted to decide whether public schools contribute to the production of self-actualized persons. Two-thirds of the students decided that schools…

Manufacturing plant performance evaluation by discrete event simulation

International Nuclear Information System (INIS)

Rosli Darmawan; Mohd Rasid Osman; Rosnah Mohd Yusuff; Napsiah Ismail; Zulkiflie Leman

2002-01-01

A case study was conducted to evaluate the performance of a manufacturing plant using discrete event simulation technique. The study was carried out on animal feed production plant. Sterifeed plant at Malaysian Institute for Nuclear Technology Research (MINT), Selangor, Malaysia. The plant was modelled base on the actual manufacturing activities recorded by the operators. The simulation was carried out using a discrete event simulation software. The model was validated by comparing the simulation results with the actual operational data of the plant. The simulation results show some weaknesses with the current plant design and proposals were made to improve the plant performance. (Author)

Giant onsite electronic entropy enhances the performance of ceria for water splitting.

Science.gov (United States)

Naghavi, S Shahab; Emery, Antoine A; Hansen, Heine A; Zhou, Fei; Ozolins, Vidvuds; Wolverton, Chris

2017-08-18

Previous studies have shown that a large solid-state entropy of reduction increases the thermodynamic efficiency of metal oxides, such as ceria, for two-step thermochemical water splitting cycles. In this context, the configurational entropy arising from oxygen off-stoichiometry in the oxide, has been the focus of most previous work. Here we report a different source of entropy, the onsite electronic configurational entropy, arising from coupling between orbital and spin angular momenta in lanthanide f orbitals. We find that onsite electronic configurational entropy is sizable in all lanthanides, and reaches a maximum value of ≈4.7 k B per oxygen vacancy for Ce 4+ /Ce 3+ reduction. This unique and large positive entropy source in ceria explains its excellent performance for high-temperature catalytic redox reactions such as water splitting. Our calculations also show that terbium dioxide has a high electronic entropy and thus could also be a potential candidate for solar thermochemical reactions.Solid-state entropy of reduction increases the thermodynamic efficiency of ceria for two-step thermochemical water splitting. Here, the authors report a large and different source of entropy, the onsite electronic configurational entropy arising from coupling between orbital and spin angular momenta in f orbitals.

Radwaste reduction experience at Oyster Creek and Three Mile Island Nuclear Power Plants

International Nuclear Information System (INIS)

Ross, M.

1993-01-01

True radwaste minimization at an operating nuclear power plant means straddling the line between ''what is'' and ''what-can-be'' and then regularly moving that line so that dreams become reality. This effort involves keeping track of and maintaining successful programs of the past while searching out and incorporating the best of the upcoming processes, equipment, and contractors. Some of the tactics used for waste minimization have appreciable results and some have small direct results. But even those with small results add to a final total of volume saved. In addition, the approaches with smaller results demonstrate an unmistakable attitude on the part of management that any unnecessary radwaste production is not acceptable. This attitude is understood and assimilated by engineering, operations, and maintenance in such a way that it becomes a matter of pride to reduce radwaste production to quantities below those officially projected. The GPUN plants at Oyster Creek and Three Mile Island Unit-1 limit the quantity of materials allowed onsite under the premise that an item that stays out of contaminated areas cannot become radwaste. For material exiting contaminated zones, the plants have used a combination of preventative avoidance of radwaste generation and careful processing. This includes sorting and screening of materials leaving contaminated areas to reduce the number of items to eventually be treated, preplanning of work efforts to minimize radwaste that must be generated, wood planning, onsite decontamination units, onsite contractor supplied equipment, and offsite radwaste processors in order to minimize the final amount of radwaste to be buried. Sometimes when employing one of these methods, it is necessary to consider not only the waste generated by the process directly but also secondary wastes caused by interactions with other areas of plant operation, such as equipment maintenance

Onsite nondestructive examination techniques for irradiated water-cooled power reactor fuel

International Nuclear Information System (INIS)

1981-03-01

The International Atomic Energy Agency, in response to the recommendations from several Member States, has prepared this Guidebook on Onsite Non-Destructive Techniques for Irradiated Water-Cooled Power Reactor Fuel with the assistance of a number of experts and organizations in this field. During the preparation of this report it became evident that a comparison between different techniques is a most difficult task and depends on a number of factors related to fuel design, plant characteristics and operating conditions. Consequently the emphasis of the report is on the survey of different techniques presently available. It is also to be noted that because the degree of development for any given technique varies significantly among organizations, it is understood that the report should not be used as consensus standard of the minimum capabilities for each class of techniques, nor does it give recommendations in the regulatory sense. Furthermore, the inclusion of some commercial pieces of equipment, services and other products are for illustrative purposes only and neither implies any preference by the Agency nor can the Agency be liable for any material presented in the report

The safeguards on-site laboratory at Sellafield. Five years operational experience

Energy Technology Data Exchange (ETDEWEB)

Duinslaeger, L.; Belle, P. van; Mayer, K.; Casteleyn, K.; Abousahl, S.; Daures, P.; Eberle, H.; Enright, T.; Guiot, A.; Hild, M.; Horta Domenech, J.; Lajarge, P.; Laurent, P.; Le Terrier, A.; Lynch, B.; Marucci, M.; Millet, S.; Ottmar, H.; Richir, P.; Street, S.; Vallet, P.; Zuleger, E. [European Commission, Karlsruhe (Germany). Inst. for Transuranium Elements

2004-06-01

The start of operation of the large reprocessing facilities led Euratom Safeguards to a new approach for verification analysis of samples taken at the facility: the installation of on-site laboratories. The availability of analytical capabilities for independent verification measurements at the site of these facilities offers obvious advantages in view of timeliness of results. The 'On-Site Laboratory' (OSL) at the BNFL Sellafield site was the first ever and entered into operation in 1999. For almost five years, the Institute for Transuranium Elements (ITU) has been operating the laboratory under routine conditions. During this period, more than one thousand safeguards samples were analysed. The experience gained in the management, logistics and operation of the OSL allow a critical review based on a significant period in time. This includes also aspects of training of staff, maintenance of equipment, flow of information, and improvements in the efficiency. The analytical issues are of key importance: based on the operational experience, the measurement methods were adapted (changing boundary conditions), the distribution of samples according to material type changed (start up of MOS fabrication plant), and the cutback in resources triggered a further streamlining of the analytical efforts. (orig.)

Continuous Analytical Performances Monitoring at the On-Site Laboratory through Proficiency, Inter-Laboratory Testing and Inter-Comparison Analytical Methods

International Nuclear Information System (INIS)

Duhamel, G.; Decaillon, J.-G.; Dashdondog, S.; Kim, C.-K.; Toervenyi, A.; Hara, S.; Kato, S.; Kawaguchi, T.; Matsuzawa, K.

2015-01-01

Since 2008, as one measure to strengthen its quality management system, the On-Site Laboratory for nuclear safeguards at the Rokkasho Reprocessing Plant, has increased its participation in domestic and international proficiency and inter-laboratory testing for the purpose of determining analytical method accuracy, precision and robustness but also to support method development and improvement. This paper provides a description of the testing and its scheduling. It presents the way the testing was optimized to cover most of the analytical methods at the OSL. The paper presents the methodology used for the evaluation of the obtained results based on Analysis of variance (ANOVA). Results are discussed with respect to random, systematic and long term systematic error. (author)

40 CFR 266.108 - Small quantity on-site burner exemption.

Science.gov (United States)

2010-07-01

...) SOLID WASTES (CONTINUED) STANDARDS FOR THE MANAGEMENT OF SPECIFIC HAZARDOUS WASTES AND SPECIFIC TYPES OF HAZARDOUS WASTE MANAGEMENT FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.108... burn hazardous waste in an on-site boiler or industrial furnace are exempt from the requirements of...

Actual energy implementations and basic investigations

International Nuclear Information System (INIS)

Nockemann, C.; Wuestenberg, H.

1995-01-01

The actual implementations in guaranteeing the reliability of NDE systems applied in service inspections in nuclear power plants will be presented. The difference between the American PDI (Performance Demonstration Initiative) which is based on blind trials and the European ENIQ (European Network for Inspection Qualification) approach which is based on a mixed procedure of physical modeling, experience data and test experiments will be discussed. The ROC (Receiver Operating Characteristic) has been adapted from the signal detection theory to NDE problems at BAM to be used for basic investigations and for the validation of new exceptional NDE systems where modeling and reference to standards is not yet possible. Examples of application will be shown and critical discussed especially concerning the influence of the grading unit raster

Engineered ecosystem for on-site wastewater treatment in tropical areas.

Science.gov (United States)

de Sá Salomão, André Luis; Marques, Marcia; Severo, Raul Gonçalves; da Cruz Roque, Odir Clécio

2012-01-01

There is a worldwide demand for decentralized wastewater treatment options. An on-site engineered ecosystem (EE) treatment plant was designed with a multistage approach for small wastewater generators in tropical areas. The array of treatment units included a septic tank, a submersed aerated filter, and a secondary decanter followed by three vegetated tanks containing aquatic macrophytes intercalated with one tank of algae. During 11 months of operation with a flow rate of 52 L h(-1), the system removed on average 93.2% and 92.9% of the chemical oxygen demand (COD) and volatile suspended solids (VSS) reaching final concentrations of 36.3 ± 12.7 and 13.7 ± 4.2 mg L(-1), respectively. Regarding ammonia-N (NH(4)-N) and total phosphorus (TP), the system removed on average 69.8% and 54.5% with final concentrations of 18.8 ± 9.3 and 14.0 ± 2.5 mg L(-1), respectively. The tanks with algae and macrophytes together contributed to the overall nutrient removal with 33.6% for NH(4)-N and 26.4% for TP. The final concentrations for all parameters except TP met the discharge threshold limits established by Brazilian and EU legislation. The EE was considered appropriate for the purpose for which it was created.

Risk-based design of process plants with regard to domino effects and land use planning.

Science.gov (United States)

Khakzad, Nima; Reniers, Genserik

2015-12-15

Land use planning (LUP) as an effective and crucial safety measure has widely been employed by safety experts and decision makers to mitigate off-site risks posed by major accidents. Accordingly, the concept of LUP in chemical plants has traditionally been considered from two perspectives: (i) land developments around existing chemical plants considering potential off-site risks posed by major accidents and (ii) development of existing chemical plants considering nearby land developments and the level of additional off-site risks the land developments would be exposed to. However, the attempts made to design chemical plants with regard to LUP requirements have been few, most of which have neglected the role of domino effects in risk analysis of major accidents. To overcome the limitations of previous work, first, we developed a Bayesian network methodology to calculate both on-site and off-site risks of major accidents while taking domino effects into account. Second, we combined the results of risk analysis with Analytic Hierarchical Process to design an optimal layout for which the levels of on-site and off-site risks would be minimum. Copyright © 2015 Elsevier B.V. All rights reserved.

ZERO-DIMENSIONAL MODEL OF A DIMETHYL ETHER (DME) PLANT BASED ON GASIFICATION OF TORREFIED BIOMASS

DEFF Research Database (Denmark)

Clausen, Lasse Røngaard; Elmegaard, Brian; Houbak, Niels

2009-01-01

similar to coal, which enables the use of commercially available coal gasification processing equipment. The DME plant model is integrated with a steam cycle that utilizes waste heat from the plant and covers the on-site electricity consumption. The plant model predicts a fuel production efficiency of 67...... % (LHV) from torrefied biomass to DME and 70 % (LHV) if the exported electricity is included. When accounting for raw, untreated biomass, the efficiency for DME production is reduced to about 60 %....

Actual developments and latest trends in the field of biogas technology

International Nuclear Information System (INIS)

Kavoliuniene, D.; Krieg, A.; Mitterleitner, H.; Schulz, H.

1994-01-01

At present the agricultural biogas technology is experiencing an enormous upswing. The reasons for this are above all the new law about the electric current supply from regenerative sources and its reimbursement, the progress in the construction and system technology, economic and ecological aspects and the fermentation of recyclings at the food processing industry. In this paper the actually interesting technical and constructional solutions as well as the new developments for biogas plants are discussed. The most important results of the measurements and practical tests were explained. Furthermore the appropriate possibilities of the gas utilisation and the economic aspects are discussed. Finally a forecasting is given for future tasks and developments, for the biogas generation from grass and other plants, the utilisation of organic waste and for foil biogas plants. (orig.) [de

Safety analysis, 200 Area, Savannah River Plant: Separations area operations. Receiving Basin for Offsite Fuel (Supplement 3)

Energy Technology Data Exchange (ETDEWEB)

Allen, P M

1983-09-01

Analysis of the Savannah River Plant RBOF and RRF included an evaluation of the reliability of process equipment and controls, administrative controls, and engineered safety features. The evaluation also identified potential scenarios and radiological consequences. Risks were calculated in terms of 50-year population dose commitment per year (man-rem/year) to the onsite and offsite population within an 80 Km radius of RBOF and RRF, and to an individual at the plant boundary. The total 50-year onsite and offsite population radiological risks of operating the RBOF and RRF were estimated to be 1.0 man-rem/year. These risks are significantly less than the population dose of 54,000 man/rem/yr for natural background radiation in a 50-mile radius. The 50-year maximum offsite individual risk from operating the facility was estimated to be 2.1 {times} 10{sup 5} rem/yr. These risks are significantly lower than 93 mrem/yr an individual is expected to receive from natural background radiation in this area. The analysis shows. that the RBOF and RRF can be operated without undue risk to onsite personnel or to the general public.

On-site storage of high level nuclear waste: Attitudes and perceptions of local residents

International Nuclear Information System (INIS)

Bassett, G.W. Jr.; Jenkins-Smith, H.C.; Silva, C.

1996-01-01

No public policy issue has been as difficult as high-level nuclear waste. Debates continue regarding Yucca Mountain as a disposal site, and - more generally - the appropriateness of geologic disposal and the need to act quickly. Previous research has focused on possible social, political, and economic consequences of a facility in Nevada. Impacts have been predicted to be potentially large and to emanate mainly from stigmatization of the region due to increased perceptions of risk. Analogous impacts from leaving waste at power plants have been either ignored or assumed to be negligible. This paper presents survey results on attitudes of residents in three countries where nuclear waste is currently stored. Topics include perceived risk, knowledge of nuclear waste and radiation, and impacts on jobs, tourism, and housing values from leaving waste on site. Results are similar to what has been reported for Nevada; the public is concerned about possible adverse effects from on-site storage of waste. 24 refs., 7 figs., 5 tabs

On-site storage of high level nuclear waste: attitudes and perceptions of local residents.

Science.gov (United States)

Bassett, G W; Jenkins-Smith, H C; Silva, C

1996-06-01

No public policy issue has been as difficult as high-level nuclear waste. Debates continue regarding Yucca Mountain as a disposal site, and-more generally-the appropriateness of geologic disposal and the need to act quickly. Previous research has focused on possible social, political, and economic consequences of a facility in Nevada. Impacts have been predicted to be potentially large and to emanate mainly from stigmatization of the region due to increased perceptions of risk. Analogous impacts from leaving waste at power plants have been either ignored or assumed to be negligible. This paper presents survey results on attitudes of residents in three counties where nuclear waste is currently stored. Topics include perceived risk, knowledge of nuclear waste and radiation, and impacts on jobs, tourism, and housing values from leaving waste on site. Results are similar to what has been reported for Nevada; the public is concerned about possible adverse effects from on-site storage of waste.

78 FR 2287 - Daimler Buses North America, Inc., a Subsidiary of Daimler North America Corp, Including On-Site...

Science.gov (United States)

2013-01-10

... subsidiary of Daimler North America Corp., including on-site leased workers from Noramtec, First Choice... America, Inc., a Subsidiary of Daimler North America Corp, Including On-Site Leased Workers From Noramtec, First Choice Staffing, Staff Works, and Mr. Santo Lamarco From Wurth Revcar Fasteners, Inc., Oriskany...

75 FR 70690 - Visteon Corporation Springfield Plant Formerly Known as VC Regional Assembly & Manufacturing, LLC...

Science.gov (United States)

2010-11-18

... From MSX International, Adecco, and Manpower, Springfield, OH; Amended Certification Regarding... Corporation, Springfield Plant, including on-site leased workers from MSX International, Adecco, and Manpower... subject firm had their wages reported under a separate unemployment insurance (UI) tax account under the...

Medical complications and outcomes at an onsite rehabilitation unit for older people.

LENUS (Irish Health Repository)

Mulroy, M

2013-09-01

The rehabilitation of older patients in Ireland after an acute medical event occurs at dedicated onsite hospital units or at offsite centres. Information on medical complications and outcomes is inadequate.

Status of small reactor designs without on-site refuelling

International Nuclear Information System (INIS)

2007-01-01

There is an ongoing interest in member states in the development and application of small and medium sized reactors (SMRs). In the near term, most new NPPs are likely to be evolutionary designs building on proven systems while incorporating technological advances and often the economics of scale, resulting from the reactor outputs of up to 1600 MW(e). For the longer term, the focus is on innovative designs aiming to provide increased benefits in the areas of safety and security, non-proliferation, waste management, resource utilization and economy, as well as to offer a variety of energy products and flexibility in design, siting and fuel cycle options. Many innovative designs are reactors within the small-to-medium size range, having an equivalent electric power less than 700 MW(e) or even less than 300 MW(e). A distinct trend in design and technology development, accounting for about half of the SMR concepts developed worldwide, is represented by small reactors without on-site refuelling. Such reactors, also known as battery-type reactors, could operate without reloading and shuffling of fuel in the core over long periods, from 5 to 25 years and beyond. Upon the advice and with the support of IAEA member states, within its Programme 1 'Nuclear Power, Fuel Cycle, and Nuclear Science', the IAEA provides a forum for the exchange of information by experts and policy makers from industrialized and developing countries on the technical, economic, environmental, and social aspects of SMRs development and implementation in the 21st century, and makes this information available to all interested Member States by producing status reports and other publications dedicated to advances in SMR technology. The objective of this report is to provide Member States, including those just considering the initiation of nuclear power programmes and those already having practical experience in nuclear power, with a balanced and objective information on important development trends and

Progress and prospects for phosphoric acid fuel cell power plants

Energy Technology Data Exchange (ETDEWEB)

Bonville, L.J.; Scheffler, G.W.; Smith, M.J. [International Fuel Cells Corp., South Windsor, CT (United States)

1996-12-31

International Fuel Cells (IFC) has developed the fuel cell power plant as a new, on-site power generation source. IFC`s commercial fuel cell product is the 200-kW PC25{trademark} power plant. To date over 100 PC25 units have been manufactured. Fleet operating time is in excess of one million hours. Individual units of the initial power plant model, the PC25 A, have operated for more than 30,000 hours. The first model {open_quotes}C{close_quotes} power plant has over 10,000 hours of operation. The manufacturing, application and operation of this power plant fleet has established a firm base for design and technology development in terms of a clear understanding of the requirements for power plant reliability and durability. This fleet provides the benchmark against which power plant improvements must be measured.

75 FR 76038 - Zach System Corporation a Subdivision of Zambon Company, SPA Including On-Site Leased Workers of...

Science.gov (United States)

2010-12-07

... Subdivision of Zambon Company, SPA Including On-Site Leased Workers of Turner Industries and Go Johnson, La..., including on-site leased workers from Turner Industries and Go Johnson, La Porte, Texas. The Department's... investigation revealed that Zach System Corporation is a subdivision of Zambon Company, SPA, not Zach System SPA...

Trim waste minimization at the Pinellas Plant

International Nuclear Information System (INIS)

DeLaneuville, D.

1992-01-01

Bacteria counts and several methods of slowing bacterial growth in machine trim coolant are suggested to reduce the frequency of coolant replacement without risking employee health or the longevity of the product or machinery. On-site treatment and disposal of waste trim are recommended to further reduce waste volume. This paper discusses the benefits of these efforts, including projected cost savings based on partial implementation at the Department of Energy's Pinellas Plant

Improvement of incineration efficiency of spent ion exchange resins on the incinerator at nuclear power plants. Manufacturing the solids of the resins mixed with paraffin wax and their incinerating test results on actual incinerator

International Nuclear Information System (INIS)

Izumi, Takeshi; Ohtsu, Takashi; Inagawa, Hirofumi; Kawakami, Takashi; Hagiwara, Masahiro; Ino, Takao; Ishiyama, Yuji

2011-01-01

In nuclear power plants, ion exchange resins are used at water purification systems such as condensate demineralizers. After usage, used ion exchange resins are stored at plants as low level radioactive wastes. Ion exchange resins contain water and so, those are flame resistant materials. At present, ion exchange resins are incinerated with other inflammable materials at incinerators. Furthermore, ion exchange resins are fine particle beads and are easy to be scattered in all directions, so operators must pay attentions for treatment. Then, we have developed the new solidification system of ion exchange resins with paraffin wax. Ion exchange resins are mixed and extruded with paraffin wax and these solids are enabled to incinerate at existing incinerators. In order to demonstrate this new method, we made the large amount of solids and incinerated them at actual incinerator. From these results, we have estimated to be able to incinerate the solids only at actual incinerator. (author)

[Onsite microbiology services and outsourcing microbiology and offsite laboratories--advantage and disadvantage, thinking of effective utilization].

Science.gov (United States)

Hosokawa, Naoto

2011-10-01

In recent years, budget restrictions have prompted hospital managers to consider outsourcing microbiology service. But there are many advantages onsite microbiology services. Onsite microbiology services have some advantages. 1) High recovery rate of microorganism. 2) Shorter turn around time. 3) Easy to communicate between physician and laboratory technician. 4) Effective utilization of blood culture. 5) Getting early information about microorganism. 6) Making antibiogram (microbiological local factor). 7) Getting information for infection control. The disadvantages are operating costs and labor cost. The important point of maximal utilization of onsite microbiology service is close communication between physicians to microbiology laboratory. It will be able to provide prompt and efficient report to physicians through discussion about Gram stain findings, agar plate media findings and epidemiological information. The rapid and accurate identification of pathogen affords directed therapy, thereby decreasing the use of broad-spectrum antibiotics and shortening the length of hospital stay and unnecessary ancillary procedures. When the physician use outsourcing microbiology services, should discuss with offsite laboratories about provided services. Infection control person has to arrange data of susceptibility about every isolate and monitoring multi-drug resistant organism. Not only onsite microbiology services but also outsourcing microbiology services, to communicate bedside and laboratory is most important point of effective utilization.

On-site waste storage assuring the success of on-site, low-level nuclear waste storage

International Nuclear Information System (INIS)

Preston, E.L.

1986-01-01

Waste management has reached paramount importance in recent years. The successful management of radioactive waste is a key ingredient in the successful operation of any nuclear facility. This paper discusses the options available for on-site storage of low-level radioactive waste and those options that have been selected by the Department of Energy facilities operated by Martin Marietta Energy Systems, Inc. in Oak Ridge, Tennessee. The focus of the paper is on quality assurance (QA) features of waste management activities such as accountability and retrievability of waste materials and waste packages, retrievability of data, waste containment, safety and environmental monitoring. Technical performance and careful documentation of that performance are goals which can be achieved only through the cooperation of numerous individuals from waste generating and waste managing organizations, engineering, QA, and environmental management

Seismic evaluation of non-seismically designed existing Magnox nuclear power plants

International Nuclear Information System (INIS)

Kunar, R.R.

1984-01-01

The philosophy and method adopted for the seismic assessment of three existing Magnox nuclear stations in the United Kingdom are presented in this paper. The plants were not seismically designed. The particular procedures that were applied were tailored to suit the difficulties of lack of data which is somewhat inevitable for plants designed and built about 25 to 30 years ago. Special procedures included on-site testing with a portable shake table, low vibration testing using a structural dynamics analyser, and on-site inspections. The low vibration testing was most invaluable in detecting differences between 'as-built' conditions and the engineering drawings. From the point of view of economics, this was more effective than conducting full structural surveys to determine the as-built conditions. The testing results also provided confidence in the answers from numerical models. The philosophy adopted for the Magnox reactors in the seismic assessment was to determine what peak ground accelerations the sites can sustain and then evaluate the chances of exceeding the ground accelerations over the remaining lifetime of the plants. The peak ground acceleration for each site was determined on the basis of the criteria of safe shutdown and prevention of significant off-site radiological exposure

Sacramento Municipal Utility district's interim onsite storage building for low level radioactive waste

International Nuclear Information System (INIS)

Gillis, E.

1986-01-01

In order to meet current and anticipated needs for the low level radwaste management program at the Rancho Seco Nuclear Generating Station, the Sacramento Municipal Utility District has a design and construction program underway which will provide an onsite interim storage facility that can be expanded in two and one-half year increments. The design approach utilized allows capital investment to be minimized and still provides radwaste management flexibility in anticipation of delays in resolution of the nationwide long term radwaste disposal situation. The facility provides storage and material accountability for all low level radwastes generated by the plant. Wastes are segregated by radioactivity level and are stored in two separate storage areas located within one facility. Lower activity wastes are stored in a lightly shielded structure and handled by lift trucks, while the higher activity wastes are stored in a highly shielded structure and handled remotely by manual bridge crane. The layout of the structure provides for economy of operation and minimizes personnel radiation exposure. Design philosophy and criteria, building layout and systems, estimated costs and construction schedule are discussed

Effect of operation of ammonia plants on the performance of heavy water plants (Paper No. 2.7)

International Nuclear Information System (INIS)

Anon.

1992-01-01

Heavy Water Plant, Hazira has two streams and each stream is designed to process 48 MT/hr of synthesis gas to produce the rated quantity of heavy water. However in actual practice, it is observed that actual gas composition is different from the above due to various reasons. This article describes effects of various parameters of ammonia plant on the functioning of heavy water plants, such as concentration of D/D+H in synthesis gas, concentration of hydrogen in synthesis gas, concentration of inerts in synthesis gas, pressure of synthesis gas, on stream days of ammonia plant, and concentration of impurities like CO/CO 2 in synthesis gas. (author). 2 figs

78 FR 52984 - Stone Age Interiors, Inc.; d/b/a Colorado Springs Marble and Granite Including On-Site Leased...

Science.gov (United States)

2013-08-27

....; d/b/a Colorado Springs Marble and Granite Including On-Site Leased Workers From Express Employment... Colorado Springs Marble and Granite, Colorado Springs, Colorado (hereafter collectively referred to as..., Inc., d/b/a Colorado Springs Marble and Granite, including on-site leased workers from Express...

Safety evaluation for packaging (onsite) depleted uranium waste boxes

Energy Technology Data Exchange (ETDEWEB)

McCormick, W.A.

1997-08-27

This safety evaluation for packaging (SEP) allows the one-time shipment of ten metal boxes and one wooden box containing depleted uranium material from the Fast Flux Test Facility to the burial grounds in the 200 West Area for disposal. This SEP provides the analyses and operational controls necessary to demonstrate that the shipment will be safe for the onsite worker and the public.

Safety evaluation for packaging (onsite) depleted uranium waste boxes

International Nuclear Information System (INIS)

McCormick, W.A.

1997-01-01

This safety evaluation for packaging (SEP) allows the one-time shipment of ten metal boxes and one wooden box containing depleted uranium material from the Fast Flux Test Facility to the burial grounds in the 200 West Area for disposal. This SEP provides the analyses and operational controls necessary to demonstrate that the shipment will be safe for the onsite worker and the public

On-site Destruction of Radioactive Oily Wastes Using Adsorption Coupled with Electrochemical Regeneration - 12221

Energy Technology Data Exchange (ETDEWEB)

Brown, N.W. [Arvia Technology Ltd, Daresbury Innovation Centre, Daresbury, WA4 4FS (United Kingdom); Wickenden, D.A. [Magnox Ltd, Berkeley Centre, Gloucestershire, GL13 9PB (United Kingdom); Roberts, E.P.L. [School of Chemical Engineering, University of Manchester, Manchester, M60 1QD (United Kingdom)

2012-07-01

Arvia{sup R}, working with Magnox Ltd, has developed the technology of adsorption coupled with electrochemical regeneration for the degradation of orphan radioactive oil wastes. The process results in the complete destruction of the organic phase where the radioactivity is transferred to liquid and solid secondary wastes that can then be processed using existing authorised on-site waste-treatment facilities.. Following on from successful laboratory and pilot scale trials, a full scale, site based demonstrator unit was commissioned at the Magnox Trawsfynydd decommissioning site to destroy 10 l of LLW and ILW radioactive oils. Over 99% of the emulsified oil was removed and destroyed with the majority of activity (80 - 90%) being transferred to the aqueous phase. Secondary wastes were disposed of via existing routes with the majority being disposed of via the sites active effluent treatment plant. The regeneration energy required to destroy a litre of oil was 42.5 kWh/l oil. This on-site treatment approach eliminates the risks and cost associated with transporting the active waste oils off site for incineration or other treatment. The Arvia{sup R} process of adsorption coupled with electrochemical regeneration has successfully demonstrated the removal and destruction of LLW and ILW radioactive oils on a nuclear site. Over 99.9% of the emulsified oil was removed, with the majority of the radioactive species transferred to the aqueous, supernate, phase (typically 80 - 90 %). The exception to this is Cs-137 which appears to be more evenly distributed, with 43% associated with the liquid phase and 33 % with the Nyex, the remainder associated with the electrode bed. The situation with Plutonium may be similar, but this requires confirmation, hence further work is underway to understand the full nature of the electrode bed radioactive burden and its distribution within the body of the electrodes. - Tritium gaseous discharges were negligible; hence no off-gas treatment

Effect on the annual atmospheric dispersion factor of different diffusion parameters and meteorological data at nuclear power plant

International Nuclear Information System (INIS)

Hu Erbang; Yan Jiangyu; Wang Han; Xin Cuntian

2003-01-01

Based on the hourly metrological observing data of 100 m high tower during 1997-1999 at Tianwan Nuclear Power Plant (NPP) site and 1995-1997 in Fujian Huian NPP site, the effect on the annual atmospheric dispersion factor (AADF) of four different diffusion parameters (on-site measuring values, IAEA's, Briggs's and Pasquill's) are estimated. The analysis shows that the deviation between the results from IAEA's, Briggs's and on-site measured diffusion parameters is less than 20%. The effect on the AADF from different years' meteorological data also is estimated. (authors)

Dynamics of Nutrients Transport in Onsite Wastewater Treatment Systems

Science.gov (United States)

Toor, G.; De, M.

2013-05-01

Domestic wastewater is abundant in nutrients¬ that originate from various activities in the households. In developed countries, wastewater is largely managed by (1) centralized treatment where wastewater from large population is collected, treated, and discharged and (2) onsite treatment where wastewater is collected from an individual house, treated, and dispersed onsite; this system is commonly known as septic system or onsite wastewater treatment system (OWTS) and consist of a septic tank (collects wastewater) and drain-field (disperses wastewater in soil). In areas with porous sandy soils, the transport of nutrients from drain-field to shallow groundwater is accelerated. To overcome this limitation, elevated disposal fields (commonly called mounds) on top of the natural soil are constructed to provide unsaturated conditions for wastewater treatment. Our objective was to study the dynamics of nitrogen (N) and phosphorus (P) transport in the vadose zone and groundwater in traditional and advanced OWTS. Soil water samples were collected from the vadose zone by using suction cup lysimeters and groundwater samples were collected by using piezometers. Collected samples (wastewater, soil-water, groundwater) were analyzed for various water quality parameters. The pH (4.39-4.78) and EC (0.28-0.34 dS/m) of groundwater was much lower than both wastewater and soil-water. In contrast to >50 mg/L of ammonium-N in wastewater, concentrations in all lysimeters (0.02-0.81 mg/L) and piezometers (0.01-0.82 mg/L) were 99% disappeared (primarily nitrified) in the vadose zone (20 mg/L in the vadose zones of traditional systems (drip dispersal and gravel trench). Concentrations of chloride showed a distinct pattern of nitrate-N breakthrough in vadose zone and groundwater; the groundwater nitrate-N was elevated upto 19.2 mg/L after wastewater delivery in tradional systems. Total P in the wastewater was ~10 mg/L, but low in all lysimeters (0.046-1.72 mg/L) and piezometers (0.01-0.78 mg

On-site and laboratory evaluations of soundscape quality in recreational urban spaces

DEFF Research Database (Denmark)

Bjerre, Lærke Cecilie; Larsen, Thea Mathilde; Sørensen, Anna Josefine

2017-01-01

Regulations for quiet urban areas are typically based on sound level limits alone. However, the nonacoustic context may be crucial for subjective soundscape quality. Aims: This study aimed at comparing the role of sound level and nonacoustic context for subjective urban soundscape assessment...... in the presence of the full on-site context, the visual context only, and without context. Materials and Methods: Soundscape quality was evaluated for three recreational urban spaces by using four subjective attributes: loudness, acceptance, stressfulness, and comfort. The sound level was measured at each site......, the availability of the visual context in the listening experiment had no significant effect on the ratings. The participants were overall more positive toward natural sound sources on site. Conclusion: The full immersion in the on-site nonacoustic context may be important when evaluating overall soundscape...

Actual issues concerning nuclear power plants and interconnected grid

International Nuclear Information System (INIS)

Medjimorec, D.; Brkic, S.

2004-01-01

Nuclear power plants and transmission grid have always been mutually of special relevance. In countries and/or regions where nuclear power plants are located they are almost as a rule counted among strongest nodes of the grid. Hence, they are treated as such from grid point of view in various aspects (operational, planning). In interconnected high-voltage transmission grid of European mainland, usually called UCTE interconnected system, this importance could be shown in a range of issues and several cases, particularly under present situation in which there are numerous demanding and challenging tasks put on transmission system operators, largely due to the opening of electricity markets in the most of European countries. Among these issues definitely worth of mentioning is relevant influence to both commercial paths and physical power flows, and also to exchange programmes between control areas and blocks. In this context there is also relation to cross-border transactions and mechanism applied to them. In respect to security of supply issues and future of nuclear power generation under present regulative framework of most European countries it is needed to comply with connecting conditions (and other stipulations) from national grid codes where different approaches could be observed. Furthermore, nuclear issues significantly influence approach to extension of UCTE system. In certain extent this also applies to pending re-connection of present two synchronous zones of UCTE, particularly to area of broader region directly affected with this complex process. Some of these also reflect to Croatian high-voltage transmission grid as a part of UCTE interconnected system with certain peculiarities.(author)

Safety aspects of station blackout at nuclear power plants

International Nuclear Information System (INIS)

1985-03-01

The principal focus of this report is on existing light water reactor nuclear power plants. However, many of the considerations discussed herein can be equally applied to new plants, i.e. those not yet in construction. This report is organized to provide a description of design and procedural factors which safety assessments and reviews of operating experience have shown to be important. These are divided into the off-site power system, the on-site AC power systems and alternate (or nearby) sources of power. The latter may be used in the unlikely event that both normal off-site and on-site sources fail. It must be emphasized that first priority should be placed on designing and maintaining high reliability of both the off-site and on-site AC power systems. This basic concept also applies to the capabilities for restoring power sources which failed and making use of all available alternative and nearby power sources during an emergency, to restore AC power in a prompt manner. Discussions on these aspects are provided in chapters 2 and 3 of this report. Because the expected event frequency and associated confidence in such estimations of station blackout are uncertain, preparations should be made to deal with a station blackout. The nature of those preparations, whether they be optimizing emergency procedures to use existing equipment, modifying this equipment to enhance capabilities, or adding new components or systems to cope with station blackout, must be made in light of plant-specific assessments and regulatory safety philosophies/requirements. Discussions on these matters are provided in chapter 4. General and specific conclusions and recommendations are provided in chapter 5. Appendix A provides a description of several case studies on station blackout and loss of off-site power. Abstracts of papers and presentations are provided in Appendix B with authors and affiliations identified to facilitate personal contact. The References and Bibliography contain a

Enhanced On-Site Waste Management of Plasterboard in Construction Works: A Case Study in Spain

Directory of Open Access Journals (Sweden)

Ana Jiménez-Rivero

2017-03-01

Full Text Available On-site management of construction waste commonly determines its destination. In the case of plasterboard (PB, on-site segregation becomes crucial for closed-loop recycling. However, PB is commonly mixed with other wastes in Spain. In this context, the involvement of stakeholders that can contribute to reversing this current situation is needed. This paper analyzes on-site waste management of PB in Spain through a pilot study of a construction site, with the main objective of identifying best practices to increase waste prevention, waste minimization, and the recyclability of the waste. On-site visits and structured interviews were conducted. The results show five management stages: PB distribution (I; PB installation (II; Construction waste storage at the installation area (III; PB waste segregation at the installation area (IV and PB waste transfer to the PB container and storage (V. The proposed practices refer to each stage and include the merging of Stages III and IV. This measure would avoid the mixing of waste fractions in Stage III, maximizing the recyclability of PB. In addition, two requisites for achieving enhanced management are analyzed: ‘Training and commitment’ and ‘fulfilling the requirements established by the current regulation’. The results show that foremen adopted a more pessimistic attitude than installers towards a joint commitment for waste management. Moreover, not all supervisors valued the importance of a site waste management plan, regulated by the Royal Decree 105/2008 in Spain.

Reviewing computer capabilities in nuclear power plants

International Nuclear Information System (INIS)

1990-06-01

The OSART programme of the IAEA has become an effective vehicle for promoting international co-operation for the enhancement of plant operational safety. In order to maintain consistency in the OSART reviews, OSART Guidelines have been developed which are intended to ensure that the reviewing process is comprehensive. Computer technology is an area in which rapid development is taking place and new applications may be computerized to further enhance safety and the effectiveness of the plant. Supplementary guidance and reference material is needed to help attain comprehensiveness and consistency in OSART reviews. This document is devoted to the utilization of on-site and off-site computers in such a way that the safe operation of the plant is supported. In addition to the main text, there are several annexes illustrating adequate practices as found at various operating nuclear power plants. Refs, figs and tabs

75 FR 76037 - HAVI Logistics, North America a Subsidiary of HAVI Group, LP Including On-Site Leased Workers of...

Science.gov (United States)

2010-12-07

... Logistics, North America a Subsidiary of HAVI Group, LP Including On-Site Leased Workers of Express Personnel Services and the La Salle Network, Bloomingdale, IL; Havi Logistics, North America, Lisle, IL..., applicable to workers of HAVI Logistics, North America, a subsidiary of HAVI Group, LP, including on-site...

Community emergency response to nuclear power plant accidents: A selected and partially annotated bibliography

International Nuclear Information System (INIS)

Youngen, G.

1988-10-01

The role of responding to emergencies at nuclear power plants is often considered the responsibility of the personnel onsite. This is true for most, if not all, of the incidents that may happen during the course of the plant's operating lifetime. There is however, the possibility of a major accident occurring at anytime. Major nuclear accidents at Chernobyl and Three Mile Island have taught their respective countries and communities a significant lesson in local emergency preparedness and response. Through these accidents, the rest of the world can also learn a great deal about planning, preparing and responding to the emergencies unique to nuclear power. This bibliography contains books, journal articles, conference papers and government reports on emergency response to nuclear power plant accidents. It does not contain citations for ''onsite'' response or planning, nor does it cover the areas of radiation releases from transportation accidents. The compiler has attempted to bring together a sampling of the world's collective written experience on dealing with nuclear reactor accidents on the sate, local and community levels. Since the accidents at Three Mile Island and Chernobyl, that written experience has grown enormously

Studies in training nuclear plant personnel

International Nuclear Information System (INIS)

Hamlin, K.W.

1987-01-01

One of the lessons learned from the Three Mile Island (TMI) accident was that the nuclear industry was ineffective in learning from previous events at other plants. As training programs and methods have improved since TMI, the nuclear industry has searched for effective methods to teach the lessons learned from industry events. The case study method has great potential as a solution. By reviewing actual plant events in detail, trainees can be challenged with solving actual problems. When used in a seminar or discussion format, these case studies also help trainees compare their decision-making processes with other trainees, the instructor, and the personnel involved in the actual case study event

On-site voltage measurement with capacitive sensors on high voltage systems

NARCIS (Netherlands)

Wu, L.; Wouters, P.A.A.F.; Heesch, van E.J.M.; Steennis, E.F.

2011-01-01

In Extra/High-Voltage (EHV/HV) power systems, over-voltages occur e.g. due to transients or resonances. At places where no conventional voltage measurement devices can be installed, on-site measurement of these occurrences requires preferably non intrusive sensors, which can be installed with little

The actual practice of air cleaning in Belgian nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Goossens, W.R. [PEGO, Mol (Belgium)

1995-02-01

With 60% of its power generation from nuclear stations Belgium has 7 nuclear power stations in operation with a total capacity of 5.4 MWe. Enriched uranium is imported and converted to fuel assemblies. The actinides of reprocessed fuel are recycled as MOX fuel. A main waste conditioning operation has been performed in the PAMELA vitrifier. The actual practice of nuclear air cleaning in the Belgian PWR station DOEL-4 and in the PAMELA -vitrification plant for high level liquid waste is reviewed.

Assessment of On-site sanitation system on local groundwater regime in an alluvial aquifer

Science.gov (United States)

Quamar, Rafat; Jangam, C.; Veligeti, J.; Chintalapudi, P.; Janipella, R.

2017-12-01

The present study is an attempt to study the impact of the On-site sanitation system on the groundwater sources in its vicinity. The study has been undertaken in the Agra city of Yamuna sub-basin. In this context, sampling sites (3 nos) namely Pandav Nagar, Ayodhya Kunj and Laxmi Nagar were selected for sampling. The groundwater samples were analyzed for major cations, anions and faecal coliform. Critical parameters namely chloride, nitrate and Faecal coliform were considered to assess the impact of the On-site sanitation systems. The analytical results shown that except for chloride, most of the samples exceeded the Bureau of Indian Standard limits for drinking water for all the other analyzed parameters, i.e., nitrate and faecal coliform in the first two sites. In Laxmi Nagar, except for faecal coliform, all the samples are below the BIS limits. In all the three sites, faecal coliform was found in majority of the samples. A comparison of present study indicates that the contamination of groundwater in alluvial setting is less as compared to hard rock where On-site sanitation systems have been implemented.

On-site inspections under the INF Treaty. A post-mortem

International Nuclear Information System (INIS)

Russell, J.

2001-01-01

Midnight on 31 May 2001 marked the end of all on-site inspections (OSIs) under the Intermediate-range Nuclear Forces (INF) Treaty. Signed by the US and the Soviet Union in 1987, the treaty has now come of age and must survive for the rest of its indefinite duration without the security of regular OSIs. The ending of OSIs provides an opportunity to assess the success of this aspect of the verification regime and how the treaty is to be verified without them. The INF Treaty banned all ground-launched ballistic and cruise missiles with ranges between 500 and 5,500 kilometres. It was the first treaty to eliminate a whole class of nuclear weapons and the first nuclear arms control agreement to provide for OSIs. All 2,692 INF missiles were eliminated by May 1991, within the three-year time limit. A further 10 years of OSIs helped provide reassurance of continuing compliance. The treaty will continue to be verified by so-called national technical means, primarily satellites. The Special Verification Commission, set up under the treaty to resolve issues relating to treaty implementation and compliance, will continue to meet when requested by a treaty party. Universal opinion is that the treaty has been successfully verified to date. However, a number of problems were encountered and lessons learned from the experience. In particular, the treaty negotiators proved to have been overly cautious in envisaging how inspections would actually be conducted. One of the main achievements of OSIs under the INF Treaty has been to create a basic model and procedures for inspections which have been adopted in the more complex arms control and disarmament treaties that have followed

Variational Wavefunction for the Periodic Anderson Model with Onsite Correlation Factors

Science.gov (United States)

Kubo, Katsunori; Onishi, Hiroaki

2017-01-01

We propose a variational wavefunction containing parameters to tune the probabilities of all the possible onsite configurations for the periodic Anderson model. We call it the full onsite-correlation wavefunction (FOWF). This is a simple extension of the Gutzwiller wavefunction (GWF), in which one parameter is included to tune the double occupancy of the f electrons at the same site. We compare the energy of the GWF and the FOWF evaluated by the variational Monte Carlo method and that obtained with the density-matrix renormalization group method. We find that the energy is considerably improved in the FOWF. On the other hand, the physical quantities do not change significantly between these two wavefunctions as long as they describe the same phase, such as the paramagnetic phase. From these results, we not only demonstrate the improvement by the FOWF, but we also gain insights on the applicability and limitation of the GWF to the periodic Anderson model.

Variational wavefunction for the periodic anderson model with onsite correlation factors

International Nuclear Information System (INIS)

Kubo, Katsunori; Onishi, Hiroaki

2017-01-01

We propose a variational wavefunction containing parameters to tune the probabilities of all the possible onsite configurations for the periodic Anderson model. We call it the full onsite-correlation wavefunction (FOWF). This is a simple extension of the Gutzwiller wavefunction (GWF), in which one parameter is included to tune the double occupancy of the f electrons at the same site. We compare the energy of the GWF and the FOWF evaluated by the variational Monte Carlo method and that obtained with the density-matrix renormalization group method. We find that the energy is considerably improved in the FOWF. On the other hand, the physical quantities do not change significantly between these two wavefunctions as long as they describe the same phase, such as the paramagnetic phase. From these results, we not only demonstrate the improvement by the FOWF, but we also gain insights on the applicability and limitation of the GWF to the periodic Anderson model. (author)

Standardized quality audit procedures for on-site dosimetry visits to radiotherapy hospitals. Report of the IAEA consultants' meeting, IAEA, Vienna, 27 September - 1 October 1999; revised in 2001

International Nuclear Information System (INIS)

Izewska, Joanna; Dutreix, A.; Followill, D.S.; Nisbet, A.; Novotny, J.; Sipila, P.; Dam, J. van

2002-01-01

Since 1969 the International Atomic Energy Agency (IAEA), together with the World Health Organization (WHO), has performed postal TLD audits to verify the calibration of radiotherapy beams in developing countries. The IAEA over the past 30 years, has verified the calibration of more than 3500 clinical photon beams at approximately 1000 radiotherapy hospitals. Detailed follow-up procedures have been implemented since 1996. When the TLD result of a participating institution falls outside the acceptance limits of ±5%, the institution is initially informed that there is a discrepancy and requested to try to identify the reasons why it occurred. The institution is not informed of the actual magnitude of the discrepancy (blind conditions) but is offered a second TLD audit. If the deviation cannot be resolved by the local radiotherapy institution or the national SSDL, then an on-site visit is suggested which, if accepted, is made by an IAEA expert in clinical dosimetry. The on-site visit includes a review of the dosimetry data and techniques, corrective measurements and ad-hoc training. The reasons for the discrepancy are then traced, explained, corrected and reported. Until the discrepancies are resolved and changes have been implemented by hospitals to ensure that the discrepancies do not reoccur, the safe and effective delivery of radiation doses to patients is questionable. This document provides a standardised set of procedures for resolving discrepancies during onsite visits to radiotherapy hospitals by the IAEA experts. The table below summarises the acceptance criteria to be used by the IAEA experts for dosimetry and mechanical parameters of the hospital treatment units. If some of the parameters are outside the acceptance criterion, it will not be possible for an institution to assure the adequate quality of the dosimetry practices in radiotherapy. The criteria are based on analyses of clinical data and the measurement uncertainties for various dosimetry and

Towards sustainable and robust on-site domestic wastewater treatment for all citizens

NARCIS (Netherlands)

Mgana, S.

2003-01-01

In most developing countries commonly practiced domestic wastewater treatment systems predominantly constitute anaerobic treatment process. The anaerobic treatment units mostly installed are on-site at residential dwellings.

However the commonly installed units, viz., traditional pit

Building and application of the plant condition monitoring system for nuclear power plants

International Nuclear Information System (INIS)

Ono, S.

2013-01-01

To achieve the stable operation of nuclear power plants, we developed the plant condition monitoring system based on the heat and mass balance calculation. This system has adopted the heat balance model based on the actual plant data to find the symptoms of the disorder of the equipment by heat balance changes in the turbine system. (author)

Numerical Simulation of Groundwater Flow at Kori Nuclear Power Plant Site

International Nuclear Information System (INIS)

Sohn, Wook; Sohn, Soon Whan; Chon, Chul Min; Kim, Kue Youn

2010-01-01

Recently, the understanding of hydrogeological characteristics of nuclear power sites is getting more importance with increasing public concerns over the environment since such understanding is essential for an environmentally friendly operation of plants. For such understanding, the prediction of groundwater flow pattern onsite plays the most critical role since it is the most dynamic of the factors to be considered. In this study, the groundwater flow at the Kori Plant 1 site has been simulated numerically with aim of providing fundamental information needed for improving the understanding of the hydrogeological characteristics of the site

Pinellas Plant environmental monitoring report 1985

International Nuclear Information System (INIS)

1986-04-01

The effluent and environmental monitoring programs maintained by the Pinellas Plant are designed to determine the efficiencies of treatment and control mechanisms for environmental releases; to provide measurements of discharge concentrations for comparison with applicable standards; and to assess the concentrations of these discharges in the on-site and off-site environment. This report was prepared in accordance with the reporting requirements of USDOE Draft Order 5484.1A, ''Environmental Protection, Safety, and Health Protection Information Reporting Requirements.'' All radiological and chemical effluents were found in compliance

Finding New Water: Development of On-Site Non-Potable Water Reuse Systems

Science.gov (United States)

By designing our buildings to collect and treat water generated on-site, can be and reused for flushing our toilets and irrigating our landscaping. Several water sources are generated with-in a building including: rainwater, stormwater, graywater, blackwater and foundation drain...

Role of security during safety-related emergencies at nuclear power plants

International Nuclear Information System (INIS)

Cardwell, R.G.; Moul, D.A.; McBride, J.A.; Wilson, C.W.

1984-03-01

This report provides an analysis of the literature and on-site data gathering relating to the actions of security forces at licensed nuclear power plants during safety-related emergencies. Literature search findings and results of on-site data gathering are furnished and subjected to analysis. Taking into account the analysis provided, appropriate recommendations are presented. Recommendations are keyed as to how improvements can be made in the regulatory approach and licensee planning and procedures as they relate to the subject matter under examination. In addition, certain technological problems and issues are examined within the context of the study. Appendices provide the results of the literature search, an annotated bibliography, the Data Collection Guide used, and additional details regarding certain aspects of the study that are relevant for further explication of the body of the report

Application of a microgrid with renewables for a water treatment plant

DEFF Research Database (Denmark)

Soshinskaya, Mariya; Graus, Wina; van der Meer, Jos

2014-01-01

This research explores the techno-economic potential for a predominantly renewable electricity-based microgrid serving an industrial-sized drink water plant in the Netherlands. Grid-connected and stand-alone microgrid scenarios were modelled, utilizing measured wind speed and solar irradiation data...... between 70-96% self-sufficient with renewable electricity from solar PV and wind power production. The results show that wind production potential is very high onsite and can meet 82% of onsite demand without adding solar PV. However, PV production potential is also substantial and provides a more...... balanced supply which can supply electricity at times when wind production is insufficient. Due to the supplemental supply over different parts of the day, adding solar PV also increases the benefits gained from the demand response strategy. Therefore, a solar-wind system combination is recommended over...

On-site investigations of hydrocarbon contaminated soil by the Pollut-Eval methodology

International Nuclear Information System (INIS)

Benoit, Y.; Prigent, S.; Haeseler, F.

2005-01-01

The Pollut-Eval method is based on the Rock-Eval pyrolysis method, founded on an IFP patent that has been used for decades for oil prospecting in sedimentary basins all over the world. This equipment provides data on the quantity and the quality of organic matter in sedimentary rocks. With the increasing demand for cost effective and rapid contaminated site diagnosis, it became obvious that the field of application of the Rock-Eval technology should be enlarged to environmental problematic. The Pollut-Eval methodology was developed since 1996 and firstly qualified through the design of a laboratory version. Compared to the previous apparatus dedicated to the geochemistry, innovations allow acquisition of data for accurate quantification of complex organic pollutants and mineral carbon distribution. New methods were developed especially for the characterisation of hydrocarbon pollutants in soil. Compared to kerogen analysis, the characterisation of light petroleum cuts entrapped in soil as pollutants was available by the design of an adapted refrigerated auto-sampler. The prevention of the loss of the high vapour tension pollutants couldn't be avoided for the new environmental field of applications. Site after site, the various experiments involving the 'laboratory' version of the Pollut-Eval analyser extended the application field of the methodology. The efficiency of the thermal extraction applied directly on the soil showed useful advantages compared to conventional solvent extraction techniques, especially for pollutants originating from former gas plants. The method was especially suitable for the determination of the complete carbon mass balance in the case of non-extractable organic pollutant such as coal tar or for heavy petroleum cut such as heavy fuel, vacuum distillation residue and bitumen. By the way, the Pollut-Eval method became rapidly complementary to more conventional GC quantification dedicated to complex organic pollution characterisation. By the

Solitary heat waves in nonlinear lattices with squared on-site potential

Indian Academy of Sciences (India)

A model Hamiltonian is proposed for heat conduction in a nonlinear lattice with squared on-site potential using the second quantized operators and averaging the same using a suitable wave function, equations are derived in discrete form for the field amplitude and the properties of heat transfer are examined theoretically.

Shielding requirements on-site loading and acceptance testing on the Leksell gamma knife

International Nuclear Information System (INIS)

Maitz, A.H.; Lunsford, L.D.; Wu, A.; Lindner, G.; Flickinger, J.C.

1990-01-01

On August 14, 1987, the first stereotactic radiosurgical procedure using the gamma knife was performed in North America. Located in a self-contained radiosurgical suite in the basement of Presbyterian-University Hospital in Pittsburgh, Pennsylvania. This device uses 201 highly focused beams 60Co for the single-treatment closed-skull irradiation of brain lesions localized by stereotactic techniques (radiosurgery). One hundred and fifty-two patients with intracranial arteriovenous malformations or brain tumors were treated in the first year of operation. The Presbyterian University Hospital of Pittsburgh gamma knife is the first such unit in which the 60Co sources were loaded on-site. This effort required us to solve some difficult and unusual problems encountered during site preparation, delivery, and loading of the unit in a busy hospital setting. The solutions developed enabled installation and use of the gamma knife with minimal disruption of hospital activities while maintaining acceptable levels of exposure to radiation. Environmental surveys performed during the loading of the 201 radioactive sources (total, 219 TBq) confirmed that on-site loading is possible and practical. Our experience in the design, construction, and implementation of the first North American gamma knife supports the practicality and safety of on-site loading and may be of value in the planning and development of future gamma knife installations

Simple models to predict grassland ecosystem C exchange and actual evapotranspiration using NDVI and environmental variables

Science.gov (United States)

Semiarid grasslands contribute significantly to net terrestrial carbon flux as plant productivity and heterotrophic respiration in these moisture-limited systems are correlated with metrics related to water availability (e.g., precipitation, Actual EvapoTranspiration or AET). These variables are als...

Development and application of the plant condition monitoring system for nuclear power plants

International Nuclear Information System (INIS)

Ono, S.

2014-01-01

To achieve the stable operation of nuclear power plants, we developed the plant condition monitoring system based on the heat and mass balance calculation. In this system, it is a significant feature to adopt the sophisticated heat balance model based on the actual plant data to find the symptoms of anomalies in the turbine system from heat balance changes. (author)

Planning of emergency medical treatment in nuclear power plant

International Nuclear Information System (INIS)

Kusama, Tomoko

1989-01-01

Medical staffs and health physicists have shown deep concerning at the emergency plans of nuclear power plants after the TMI nuclear accident. The most important and basic countermeasure for accidents was preparing appropriate and concrete organization and plans for treatment. We have planed emergency medical treatment for radiation workers in a nuclear power plant institute. The emergency medical treatment at institute consisted of two stages, that is on-site emergency treatment at facility medical service. In first step of planning in each stage, we selected and treatment at facility medical service. In first step of planning in each stage, we selected and analyzed all possible accidents in the institute and discussed on practical treatments for some possible accidents. The manuals of concrete procedure of emergency treatment for some accidents were prepared following discussion and facilities and equipment for medical treatment and decontamination were provided. All workers in the institute had periodical training and drilling of on-site emergency treatment and mastered technique of first aid. Decontamination and operation rooms were provided in the facillity medical service. The main functions at the facility medical service have been carried out by industrial nurses. Industrial nurses have been in close co-operation with radiation safety officers and medical doctors in regional hospital. (author)

Generation, on-site storage; handling and processing of industrial waste of Tehran

International Nuclear Information System (INIS)

Abduli, M.A.

1997-01-01

This paper describes out the present status of generation, on-site handling, processing and storage of industrial waste in Tehran. In this investigation, 67 large scale factories of different industrial groups were randomly selected. Above cited functional elements of these factories were surveyed. In this investigation a close contact with each factory was required, thus a questionnaire was prepared and distributed among these factories. The relationship between daily weight of the industrial waste (Y) and number of employer of each factory (x) is found to be Y=547.4 + 0.58 x. The relationship between daily volume of industrial waste (V), and daily weight of waste generated in each factory (Y) can be described by V=1.56 + 0.00078 Y. About 68% of the factories have their own interim storage site and the rest of the factories do not possess any on-site storage facility

Evaluation of Approaches for Managing Nitrate Loading from On-Site Wastewater Systems near La Pine, Oregon

Science.gov (United States)

Morgan, David S.; Hinkle, Stephen R.; Weick, Rodney J.

2007-01-01

This report presents the results of a study by the U.S. Geological Survey, done in cooperation with the Oregon Department of Environmental Quality and Deschutes County, to develop a better understanding of the effects of nitrogen from on-site wastewater disposal systems on the quality of ground water near La Pine in southern Deschutes County and northern Klamath County, Oregon. Simulation models were used to test the conceptual understanding of the system and were coupled with optimization methods to develop the Nitrate Loading Management Model, a decision-support tool that can be used to efficiently evaluate alternative approaches for managing nitrate loading from on-site wastewater systems. The conceptual model of the system is based on geologic, hydrologic, and geochemical data collected for this study, as well as previous hydrogeologic and water quality studies and field testing of on-site wastewater systems in the area by other agencies. On-site wastewater systems are the only significant source of anthropogenic nitrogen to shallow ground water in the study area. Between 1960 and 2005 estimated nitrate loading from on-site wastewater systems increased from 3,900 to 91,000 pounds of nitrogen per year. When all remaining lots are developed (in 2019 at current building rates), nitrate loading is projected to reach nearly 150,000 pounds of nitrogen per year. Low recharge rates (2-3 inches per year) and ground-water flow velocities generally have limited the extent of nitrate occurrence to discrete plumes within 20-30 feet of the water table; however, hydraulic-gradient and age data indicate that, given sufficient time and additional loading, nitrate will migrate to depths where many domestic wells currently obtain water. In 2000, nitrate concentrations greater than 4 milligrams nitrogen per liter (mg N/L) were detected in 10 percent of domestic wells sampled by Oregon Department of Environmental Quality. Numerical simulation models were constructed at transect (2

Cost-effective on-site screening for anaemia in pregnancy in primary ...

African Journals Online (AJOL)

syphilis serology. Results are returned days or weeks later depending on local circumstances.2 For some mobile clinics in rural areas, this delay may be as long as a month. On-site screening for ... probably anaemic still require a diagnostic test to determine ... accurate and cheap screening for and diagnosis of anaemia,.

Solitary heat waves in nonlinear lattices with squared on-site potential

Indian Academy of Sciences (India)

Abstract. A model Hamiltonian is proposed for heat conduction in a nonlinear lattice with squared on-site potential using the second quantized operators and averaging the same using a suitable wave function, equations are derived in discrete form for the field amplitude and the prop- erties of heat transfer are examined ...

On-site Labour Productivity of New Zealand Construction Industry: Key Constraints and Improvement Measures

Directory of Open Access Journals (Sweden)

Serdar Durdyev

2011-09-01

Full Text Available Productivity is key to the survival and growth of any organisation, industry or nation. Some factors constrain the achievement of the set project objectives in the New Zealand building and construction industry and are responsible for the reported steady decline of productivity and performance. This study aims to identify the key constraints to on-site labour productivity and improvement measures. Using the descriptive survey method, views of some project managers, contractors and subcontractors in New Zealand were canvassed via pilot interviews and questionnaire surveys at the qualitative and quantity data gathering stages, respectively. Multi-attribute technique was used to analyse the quantitative data. Results showed that the key external constraints to on-site labour productivity comprise, in order of decreasing impact, statutory compliance, unforeseen events and wider external dynamics. The internal constraints, which contribute 67 percent of the onsite productivity issues, comprise reworks, level of skill and experience of the workforce, adequacy of method of construction, buildability issues, and inadequate supervision and coordination. . The factors underlying each broad category of external and internal constraints are reported. The relative levels of impact of the identified constraints are expected to guide the project team in addressing the constraints in a cost-effective manner.

A nonlinear 3D real-time model for simulation of BWR nuclear power plants

International Nuclear Information System (INIS)

Ercan, Y.

1982-02-01

A nonlinear transient model for BWR nuclear power plants which consists of a 3D-core (subdivided into a number of superboxes, and with parallel flow and subcooled boiling), a top plenum, steam removal and feed water systems and main coolant recirculation pumps is given. The model describes the local core and global plant transient situation as dependent on both the inherent core dynamics and external control actions, i.e., disturbances such as motions of control rod banks, changes of mass flow rates of coolant, feed water and steam outlet. The case of a pressure-controlled reactor operation is also considered. The model which forms the basis for the digital code GARLIC-B (Er et al. 82) is aimed to be used on an on-site process computer in parallel to the actual reactor process (or even in predictive mode). Thus, special measures had to be taken into account in order to increase the computational speed and reduce the necessary computer storage. This could be achieved by - separating the neutron and power kinetics from the xenon-iodine dynamics, - treating the neutron kinetics and most of the thermodynamics and hydrodynamics in a pseudostationary way, - developing a special coupling coefficient concept to describe the neutron diffusion, calculating the coupling coefficients from a basic neutron kinetics code, - combining coarse mesh elements into superboxes, taking advantage of the symmetry properties of the core and - applying a sparse matrix technique for solving the resulting algebraic power equation system. (orig.) [de

FY 1991 report on the results of the development of an entrained bed coal gasification power plant. Part 4. Operation of pilot plant; 1991 nendo seika hokokusho. Funryusho sekitan gaska hatsuden plant kaihatsu - Sono 4. Pilot plant unten sosa hen

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-01-01

A record was summarized of the operation of the 200 t/d entrained bed coal gasification pilot plant that was constructed with the aim of establishing technology of the integrated coal gasification combined cycle power generation. As to the actual results of operation hours, the paper summarized the records of gasifier facilities, gas refining facilities, gas turbine facilities and safety environment facilities which were collected from April 1991 to January 1993. Relating to the actual results of start-up/stop, the paper summarized the records of gasifier facilities, gas refining facilities (desulfurization), gas refining facilities (dedusting), gas turbine facilities and safety environment facilities. Further, operation manuals were made for the schedule of plant start-up/stop, generalization, gasifier facilities, gas refining facilities (desulfurization), gas refining facilities (dedusting), gas turbine facilities, actual pressure/actual size combustor testing facilities and safety environment facilities. (NEDO)

Safety analysis report for packaging (onsite) sample pig transport system

International Nuclear Information System (INIS)

MCCOY, J.C.

1999-01-01

This Safety Analysis Report for Packaging (SARP) provides a technical evaluation of the Sample Pig Transport System as compared to the requirements of the U.S. Department of Energy, Richland Operations Office (RL) Order 5480.1, Change 1, Chapter III. The evaluation concludes that the package is acceptable for the onsite transport of Type B, fissile excepted radioactive materials when used in accordance with this document

Safety analysis report for packaging (onsite) sample pig transport system

Energy Technology Data Exchange (ETDEWEB)

MCCOY, J.C.

1999-03-16

This Safety Analysis Report for Packaging (SARP) provides a technical evaluation of the Sample Pig Transport System as compared to the requirements of the U.S. Department of Energy, Richland Operations Office (RL) Order 5480.1, Change 1, Chapter III. The evaluation concludes that the package is acceptable for the onsite transport of Type B, fissile excepted radioactive materials when used in accordance with this document.

Medicinal plant knowledge and its erosion among the Mien (Yao) in northern Thailand.

Science.gov (United States)

Srithi, Kamonnate; Balslev, Henrik; Wangpakapattanawong, Prasit; Srisanga, Prachaya; Trisonthi, Chusie

2009-06-22

We studied local knowledge and actual uses of medicinal plants among the Mien in northern Thailand, documenting traditional medical practices and its transfer between generations. With the assumption that discrepancies between knowledge and actual use represent knowledge erosion, we studied whether actual use of medicinal plants corresponded to people's knowledge of such uses. We used local knowledge from four specialist informants as the domain for semi-structured interviews with 34 randomly selected non-specialist informants. We calculated informant consensus, use value, and fidelity level for each species and use category and performed statistical analyses with Kolmogorov-Smirnov tests, Pearson correlation coefficient, Spearman's rank correlation coefficient, and paired-sample t-tests. We found significant discrepancies between knowledge and actual use of medicinal plants. The number of known and actually used plants increased with increasing informant age and decreased with increasing years of formal education. Medicinal plant knowledge and use in these Mien communities is undergoing inter-generational erosion because of acculturation and interrupted knowledge transmission. Preservation of Mien medicinal plant intellectual heritage requires continued documentation concerning use, conservation, and sustainable management of this resource, which should be publicized to younger Mien.

Discussion on several issues of the accidents management of nuclear power plants in operation

International Nuclear Information System (INIS)

Cao Xuewu; Wang Zhe; Zhang Yingzhen

2009-01-01

This article discusses several issues of the accident management of nuclear power plants in operation, for example: the necessity, implementation principle of accident management and accident management program etc. For conducting accident management for beyond design basis accidents, this article thinks that the accident management program should be developed and implemented to ensure that the plant and its personnel with responsibilities for accident management are adequately prepared to take effective on-site actions to prevent or mitigate the consequences of severe accident. (authors)

La problemática educativa actual

Directory of Open Access Journals (Sweden)

Daniel Filmus

2012-10-01

Full Text Available A través de una interesante y clara descripción de los cambios sufridos en América Latina y particularmente en Argentina a lo largo de la historia, el destacado especialista y actual Ministro de Educación de la Nación, Lic. Daniel Filmus, detalló los principales problemas que atraviesa hoy la educación. Su conferencia, sólidamente sustentada por numerosos datos estadísticos y ejemplos concretos, abordó temáticas claves como la exclusión, los salarios docentes, la inversión educativa, la globalización y sus efectos, la relación entre educación y demanda laboral. Finalmente, planteó algunos objetivos centrales a los que debemos apuntar para mejorar nuestro sistema educativo y lograr un país con lugar para todos

Procedure for cogeneration plant evaluation in Italy

International Nuclear Information System (INIS)

Bollettini, U.; Savelli, D.

1992-01-01

This paper develops a step-by-step approach to the evaluation of cogeneration plants for on-site power generation. The aim is to allow prospective cogeneration plant owners to build energy/cost efficient plants and to be able to make a proper assessment of eligible financial assistance which may be obtained through the provisions of energy conservation normatives and laws set up by the Italian National Energy Plan. The approach has three principal phases - the verification of the availability of the required human resources able to perform the plant evaluation (engineering, legal and business consultants), an energy/viability audit of any existing energy plant considered for retrofitting and, finally, the identification of the best technical/economic cogeneration alternative. The programmed set of evaluation tasks includes the determination of optimal contracts with ENEL (the Italian National Electricity Board), especially for the case of excess power to be ceded to the national grid, and the making of comparisons with reference cogeneration systems whose relative design/cost data are stored in existing computerized data bases

Comprehensive cooling water study annual report. Volume IV: radionuclide and heavy metal transport, Savannah River Plant

International Nuclear Information System (INIS)

Gladden, J.B.; Lower, M.W.; Mackey, H.E.; Specht, W.L.; Wilde, E.W.

1985-07-01

The principal sources of tritium, radiocesium, and radiocobalt in the environment at the Savannah River Plant have been reactor area effluent discharges to onsite streams. Radioactive releases began in 1955, with the period of major reactor releases occurring between 1955 and 1968. Since the early 1970s, releases, except for tritium releases, have been substantially reduced. Radioisotope liquid releases resulted specifically from leaching of reactor fuel elements with cladding failures which exposed the underlying fuel to water. The direct sources of these releases were heat exchanger cooling water, spent fuel storage and disassembly basin effluents, and process water from each of the reactor areas. Offsite radiochemical monitoring of water and sediment at upriver and downriver water treatment facilities indicates that SRP contributions of gamma-emitting radionuclide levels present at these facilities are minute. Tritium in water attributable to SRP operations is routinely detected at the downriver facilities; however, total alpha and nonvolatile beta concentrations attributable to SRP liquid releases are not detected at the downriver facilities. The historic material balance calculated for onsite releases of tritium transported to the Savannah River exhibits a high accounting of tritium released. Other radionuclides released to onsite streams have primarily remained in onsite floodplains. Radionuclide releases associated with reactor operations are derived primarily from disassembly basin water releases in the reactor areas and historically have been the major source of radioactivity released to onsite streams. The movement and interaction of these releases have been governed by cooling water discharges. Liquid releases continue to meet DOE concentration guides for the various radioisotopes in onsite streams and in the Savannah River

Safety analysis report for packaging (onsite) contaminated well cars

International Nuclear Information System (INIS)

Mercado, J.E.

1998-01-01

In support of past operations, railcars were used to ship irradiated fuel from the 100 Area fuel storage basins to the Plutonium Uranium Extraction (PUREX) Facility. There are two configurations for the packaging systems that transported the fuel: the Three-Well Cask Car, which is outfitted with three casks, and the taller, single well, New Production Reactor (NPR) Cask Car. In this document, these cask cars are referred to collectively as well cars. The purpose of this document is to evaluate and authorize the onsite transportation of well cars that contain significant levels of contamination. No irradiated fuel will be transported in the well cars. Neutron detection data confirmed that the well cars do not contain fuel. The intention is to move 14 retired well cars from their current locations in the 100 Area to a suitable storage location in the 200 Area. Each well car contains Type B quantities of radioactivity; so that the hazard of the transport operation is relatively low. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the contaminated well cars meet the transportation safety requirements of HNF-PRO-154, Responsibilities and Procedures for Hazardous Material Shipments for an onsite packaging. The scope of this document addresses the preparation and transportation of the contaminated well cars

On-site and laboratory evaluations of soundscape quality in recreational urban spaces

DEFF Research Database (Denmark)

Bjerre, Lærke Cecilie; Larsen, Thea Mathilde; Sørensen, Anna Josefine

2017-01-01

on site. Moreover, the availability of the visual context in the listening experiment had no significant effect on the ratings. The participants were overall more positive toward natural sound sources on site. Conclusion: The full immersion in the on-site nonacoustic context may be important when...

Application of plant Technology Knowledge Infrastructure to plant engineering and maintenance

International Nuclear Information System (INIS)

Kawanaka, Tsutomu; Tamaki, Yuji; Ota, Yoshimi; Yoshinaga, Toshiaki

2006-01-01

Management and maintenance tools are now greatly available for contributing reduction of maintenance cost and time. These tools surely give us much benefit, but are only for maintaining reliabilities of the equipment. Reliability of the plant depends on the design and actual operating conditions. Accordingly, the matter to do first is to consider facilities in the range of the plant life cycle. This brings the result that 'process property' and 'functional property' are required besides 'equipment property' which has been used for the evaluation index. Because these properties are formed at the designing stage, the beginning of the life cycle, and by applying the equipment function to them, maintenance cost can be reduced without risk increasing. To execute this subject, it is strongly required to accumulate information and data, to build up the Technology Knowledge Infrastructure. This paper reports the system and the way of applying the method to the actual plants. (author)

Disposal of slightly contaminated radioactive wastes from nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Minns, J.L. [Nuclear Regulatory Commission, Washington, DC (United States)

1995-02-01

With regard to the disposal of solid wastes, nuclear power plants basically have two options, disposal in a Part 61 licensed low-level waste site, or receive approval pursuant to 20.2002 for disposal in a manner not otherwise authorized by the NRC. Since 1981, the staff has reviewed and approved 30 requests for disposal of slightly contaminated radioactive materials pursuant to Section 20.2002 (formerly 20.302) for nuclear power plants located in non-Agreement States. NRC Agreement States have been delegated the authority for reviewing and approving such disposals (whether onsite or offsite) for nuclear power plants within their borders. This paper describes the characteristics of the waste disposed of, the review process, and the staff`s guidelines.

Facilitating Employee Recruitment and Retention through On-Site Child Day Care.

Science.gov (United States)

Lombardo, Kathy A.

An early childhood educator at a 360-bed community general hospital implemented a licensed on-site child care program for children between 6 weeks and 10 years of age in order to improve employee recruitment and retention by assisting employees with appropriate child care arrangements. A parent questionnaire was used to assess the degree to which…

Propagation of transition fronts in nonlinear chains with non-degenerate on-site potentials

Science.gov (United States)

Shiroky, I. B.; Gendelman, O. V.

2018-02-01

We address the problem of transition front propagation in chains with a bi-stable nondegenerate on-site potential and a nonlinear gradient coupling. For generic nonlinear coupling, one encounters a special regime of transitions, characterized by extremely narrow fronts, far supersonic velocities of the front propagation, and long waves in the oscillatory tail. This regime can be qualitatively associated with a shock wave. The front propagation can be described with the help of a simple reduced-order model; the latter delivers a kinetic law, which is almost not sensitive to the fine details of the on-site potential. Besides, it is possible to predict all main characteristics of the transition front, including its velocity, as well as the frequency and the amplitude of the oscillatory tail. Numerical results are in good agreement with the analytical predictions. The suggested approach allows one to consider the effects of an external pre-load, the next-nearest-neighbor coupling and the on-site damping. When the damping is moderate, it is possible to consider the shock propagation in the damped chain as a perturbation of the undamped dynamics. This approach yields reasonable predictions. When the damping is high, the transition front enters a completely different asymptotic regime of a subsonic kink. The gradient nonlinearity generically turns negligible, and the propagating front converges to the regime described by a simple exact solution for a continuous model with linear coupling.

Wilderness Recreation Demand: A Comparison of Travel Cost and On-Site Cost Models

Science.gov (United States)

J.M. Bowker; A. Askew; L. Seymour; J.P. Zhu; D. English; C.M. Starbuck

2009-01-01

This study used travel cost and on-site day cost models, coupled with the Forest Service’s National Visitor Use Monitoring data, to examine the demand for and value of recreation access to designated Wilderness.

Droplet-counting Microtitration System for Precise On-site Analysis.

Science.gov (United States)

Kawakubo, Susumu; Omori, Taichi; Suzuki, Yasutada; Ueta, Ikuo

2018-01-01

A new microtitration system based on the counting of titrant droplets has been developed for precise on-site analysis. The dropping rate was controlled by inserting a capillary tube as a flow resistance in a laboratory-made micropipette. The error of titration was 3% in a simulated titration with 20 droplets. The pre-addition of a titrant was proposed for precise titration within an error of 0.5%. The analytical performances were evaluated for chelate titration, redox titration and acid-base titration.

CASDAC system: On-Site Multiplexer user's guide

International Nuclear Information System (INIS)

Yamamoto, Yoichi; Koyama, Kinji

1993-03-01

The CASDAC (Containment and Surveillance Data Authenticated Communication) system has been developed by JAERI for nuclear safeguards and physical protection of nuclear material. This system is a remote monitoring system for continual verification of security and safeguards status of nuclear material. The CASDAC system consists of two subsystems, one of them is a Grand Command Center (GCC) subsystem and the other is a facility subsystem. This report describes the outline and usage of the On-Site Multiplexer (OSM), which controls all other equipments in a facility subsystem and communicates with the GCC. This work has been carried out in the framework of Japan Support Programme for Agency Safeguards (JASPAS) as a project, JA-1. (author)

Carbon-14 tracer study of polyacrylate polymer in a wastewater plant

International Nuclear Information System (INIS)

Martin, J.E.; King, L.W.; Hylko, J.M.

1990-01-01

A highly absorbent consumer-product, polyacrylate-polymer material tagged with carbon-14 ( 14 C), was dosed to a standard on-site aerobic wastewater treatment plant which contained a settling chamber, an aeration chamber, and an effluent chamber. Operation of the test plant was essentially the same as that of a control plant even under exaggerated conditions. About 97% of the polymer material was retained in solids deposited in the primary and aeration chambers, and effluent releases were minimal. The use of a 14 C tagging procedure proved to be a successful method for studying the behavior of these complex materials. It may be useful to conduct a further study on retained solids to determine whether microbial decomposition of the polymer material occurs while they remain in typical plants. (author)

Simulation study of a system for diagnosis of nuclear power plant operation

International Nuclear Information System (INIS)

Wakabayashi, J.; Fukumoto, A.

1981-01-01

A diagnostic system of the nuclear power plant operation is proposed and the applicability of this system to the actual plant has been verified by computer simulation. A typical pressurized water reactor plant simulator was made by an analog computer and the diagnostic system was made by a digital computer. The observed signals obtained from the actual plant are simulated by superposing the equivalent observation noises generated by the digital computer on the sampled signals obtained from the plant simulator. 8 refs

28 CFR 79.32 - Criteria for eligibility for claims by onsite participants.

Science.gov (United States)

2010-07-01

... following: (a) That the claimant was present onsite at any time during a period of atmospheric nuclear testing; (b) That the claimant was a participant during that period in the atmospheric detonation of a nuclear device; and (c) That after such participation, the claimant contracted a specified compensable...

Enhancement of spin polarization induced by Coulomb on-site repulsion between localized pz electrons in graphene embedded with line defects.

Science.gov (United States)

Ren, Ji-Chang; Wang, Zhigang; Zhang, Rui-Qin; Ding, Zejun; Van Hove, Michel A

2015-11-11

It is well known that the effect of Coulomb on-site repulsion can significantly alter the physical properties of the systems that contain localized d and/or f electrons. However, little attention has been paid to the Coulomb on-site repulsion between localized p electrons. In this study, we demonstrated that Coulomb on-site repulsion between localized pz electrons also plays an important role in graphene embedded with line defects. It is shown that the magnetism of the system largely depends on the choice of the effective Coulomb on-site parameter Ueff. Ueff at the edges of the defect enhances the exchange splitting, which increases the magnetic moment and stabilizes a ferromagnetic state of the system. In contrast, Ueff at the center of the defect weakens the spin polarization of the system. The behavior of the magnetism is explained with the Stoner criterion and the charge accumulation at the edges of the defect. Based on the linear response approach, we estimate reasonable values of Ueff to be 2.55 eV (2.3 eV) at the center (edges) of the defects. More importantly, using a DFT+U+J method, we find that exchange interactions between localized p electrons also play an important role in the spin polarization of the system. These results imply that Coulomb on-site repulsion is necessary to describe the strong interaction between localized pz electrons of carbon related materials.

Monitoring of persistent organic pollutants in seawater of the Pearl River Estuary with rapid on-site active SPME sampling technique

International Nuclear Information System (INIS)

Huang, Siming; He, Shuming; Xu, Hao; Wu, Peiyan; Jiang, Ruifen; Zhu, Fang; Luan, Tiangang; Ouyang, Gangfeng

2015-01-01

An on-site active solid-phase microextraction (SPME) sampling technique coupled with gas chromatography-mass spectrometry (GC–MS) for sampling and monitoring 16 polycyclic aromatic hydrocarbons (PAHs) and 8 organochlorine pesticides (OCPs) in seawater was developed. Laboratory experiments demonstrated that the sampling-rate calibration method was practical and could be used for the quantification of on-site sampling. The proposed method was employed for field tests which covered large amounts of water samples in the Pearl River Estuary in rainy and dry seasons. The on-site SPME sampling method can avoid the contamination of sample, the losses of analytes during sample transportation, as well as the usage of solvent and time-consuming sample preparation process. Results indicated that the technique with the designed device can address the requirement of modern environment water analysis. In addition, the sources, bioaccumulation and potential risk to human of the PAHs and OCPs in seawater of the Pearl River Estuary were discussed. - Highlights: • SPME on-site active sampling technique was developed and validated. • The technique was employed for field tests in the Pearl River Estuary. • 16 PAHs and 8 OCPs in the seawater of Pearl River Estuary were monitored. • The potential risk of the PAHs and OCPs in Pearl River Estuary were discussed. - An on-site active SPME sampling technique was developed and successfully applied for sampling and monitoring 16 PAHs and 8 OCPs in the Pearl River Estuary

Pathogen Treatment Guidance and Monitoring Approaches fro On-Site Non-Potable Water Reuse

Science.gov (United States)

On-site non-potable water reuse is increasingly used to augment water supplies, but traditional fecal indicator approaches for defining and monitoring exposure risks are limited when applied to these decentralized options. This session emphasizes risk-based modeling to define pat...

Four planting devices for planting no-till maize

Directory of Open Access Journals (Sweden)

Osei Bonsu Patterson

2015-05-01

Full Text Available An experiment was conducted at the CSIR-Crops Research Institute (CSIR-CRI Experimental station at Ejura in Ghana to compare the efficiency of four devices for planting no-till maize: Tractor drawn seeder, Chinese made jab planter, Locally made jab planter and a Cutlass. It took two (2 hours 48 minutes to plant one hectare of maize with the tractor drawn seeder, which was significantly (p less than 1% faster than all the planting methods. Cutlass was the slowest planting device lasting more than 14 hours per hectare. There was no significant difference in planting time between the Chinese planter and local planter. Economic analysis showed that cutlass planting produced the highest net benefit, whilst tractor drawn seeder produced the least benefit. In this study cutlass planting was done with precision by collaborating farmers. In actual farm situation however, hired laborers (planting gangs often plant in haste which often results in poor plant population leading to low yields. Tractor drawn seeders or jab planters could reduce drudgery in planting and encourage farm expansion.

On-Site Processing and Subsampling of Surface Soil Samples for the Analysis of Explosives

National Research Council Canada - National Science Library

Hewitt, Alan D

2003-01-01

The on-site implementation of a sampling and analysis plan for the determination of explosives residues exposed a large uncertainty in our ability to quickly obtain representative subsamples from either large (>500 g...

Meteorological considerations in emergency response capability at nuclear power plant

International Nuclear Information System (INIS)

Fairobent, J.E.

1985-01-01

Meteorological considerations in emergency response at nuclear power plants are discussed through examination of current regulations and guidance documents, including discussion of the rationale for current regulatory requirements related to meteorological information for emergency response. Areas discussed include: major meteorological features important to emergency response; onsite meteorological measurements programs, including redundant and backup measurements; access to offsite sources of meteorological information; consideration of real-time and forecast conditions and atmospheric dispersion modeling

Rapid on-site detection of Acidovorax citrulli by cross-priming amplification.

Science.gov (United States)

Zhang, Jing; Tian, Qian; Zhu, Shui-fang; Zhao, Wen-jun; Liu, Feng-quan

2012-08-01

Cross-priming amplification (CPA) for Acidovorax citrulli detection was evaluated in this study. The sensitivity of CPA assay for pure bacterial culture was 3.7 × 10(3) CFU/ml. Bacteria on naturally infected watermelon seeds were detected using CPA assay, suggesting this method is suitable for A. citrulli on-site detection from watermelon seeds. Copyright © 2012 Elsevier Ltd. All rights reserved.

Actualism and Fictional Characters

Directory of Open Access Journals (Sweden)

André Leclerc

2016-04-01

Full Text Available http://dx.doi.org/10.5007/1808-1711.2016v20n1p61 In what follows, I present only part of a program that consists in developing a version of actualism as an adequate framework for the metaphysics of intentionality. I will try to accommodate in that framework suggestions found in Kripke’s works and some positions developed by Amie Thomasson. What should we change if we accept “fictional entities” in the domain of the actual world? Actualism is the thesis that everything that exists belongs to the domain of the actual world and that there are no possibilia. I shall defend that there are abstract artefacts, like fictional characters, and institutions. My argument could be seen as a version of Moore’s paradox: it is paradoxical to say: “I made (created it, but I do not believe it exists”. Moreover, there are true sentences about them. I will examine what it means to include abstract artefacts in the domain of the actual world. I favour a use of “exist” that includes beings with no concrete occupation of tri-dimensional space; to exist, it is enough to have been introduced at some moment in history. Abstract artefacts, like fictional characters, exist in that sense. I argue that it is important to distinguish two perspectives (internal and external in order to clarify the kind of knowledge we have of fictional characters. However, their existence presupposes a relation of dependence to a material basis and the mental activities of many people.

77 FR 13352 - Exxonmobil Chemical Company Films Business Division Including on-Site Leased Workers From...

Science.gov (United States)

2012-03-06

..., Take Care Corporation, Conestoga Rovers and Associates, Phillips Engineering, Rockwell Engineering, Excel Logistics, and American Food and Vending, Calhoun Spotting Service, and Job World working on-site...

Testing the applicability of rapid on-site enzymatic activity detection for surface water monitoring

Science.gov (United States)

Stadler, Philipp; Vogl, Wolfgang; Juri, Koschelnik; Markus, Epp; Maximilian, Lackner; Markus, Oismüller; Monika, Kumpan; Peter, Strauss; Regina, Sommer; Gabriela, Ryzinska-Paier; Farnleitner Andreas, H.; Matthias, Zessner

2015-04-01

On-site detection of enzymatic activities has been suggested as a rapid surrogate for microbiological pollution monitoring of water resources (e.g. using glucuronidases, galactosidases, esterases). Due to the possible short measuring intervals enzymatic methods have high potential as near-real time water quality monitoring tools. This presentation describes results from a long termed field test. For twelve months, two ColiMinder devices (Vienna Water Monitoring, Austria) for on-site determination of enzymatic activity were tested for stream water monitoring at the experimental catchment HOAL (Hydrological Open Air Laboratory, Center for Water Resource Systems, Vienna University of Technology). The devices were overall able to follow and reflect the diverse hydrological and microbiological conditions of the monitored stream during the test period. Continuous data in high temporal resolution captured the course of enzymatic activity in stream water during diverse rainfall events. The method also proofed sensitive enough to determine diurnal fluctuations of enzymatic activity in stream water during dry periods. The method was able to capture a seasonal trend of enzymatic activity in stream water that matches the results gained from Colilert18 analysis for E. coli and coliform bacteria of monthly grab samples. Furthermore the comparison of ColiMinder data with measurements gained at the same test site with devices using the same method but having different construction design (BACTcontrol, microLAN) showed consistent measuring results. Comparative analysis showed significant differences between measured enzymatic activity (modified fishman units and pmol/min/100ml) and cultivation based analyses (most probable number, colony forming unit). Methods of enzymatic activity measures are capable to detect ideally the enzymatic activity caused by all active target bacteria members, including VBNC (viable but nonculturable) while cultivation based methods cannot detect VBNC

Organic Wastewater Compounds, Pharmaceuticals, andColiphage in Ground Water Receiving Discharge from OnsiteWastewater Treatment Systems near La Pine, Oregon:Occurrence and Implications for Transport

Science.gov (United States)

Hinkle, Stephen J.; Weick, Rodney J.; Johnson, Jill M.; Cahill, Jeffery D.; Smith, Steven G.; Rich, Barbara J.

2005-01-01

The occurrence of organic wastewater compounds (components of 'personal care products' and other common household chemicals), pharmaceuticals (human prescription and nonprescription medical drugs), and coliphage (viruses that infect coliform bacteria, and found in high concentrations in municipal wastewater) in onsite wastewater (septic tank effluent) and in a shallow, unconfined, sandy aquifer that serves as the primary source of drinking water for most residents near La Pine, Oregon, was documented. Samples from two types of observation networks provided basic occurrence data for onsite wastewater and downgradient ground water. One observation network was a group of 28 traditional and innovative (advanced treatment) onsite wastewater treatment systems and associated downgradient drainfield monitoring wells, referred to as the 'innovative systems network'. The drainfield monitoring wells were located adjacent to or under onsite wastewater treatment system drainfield lines. Another observation network, termed the 'transect network', consisted of 31 wells distributed among three transects of temporary, stainless-steel-screened, direct-push monitoring wells installed along three plumes of onsite wastewater. The transect network, by virtue of its design, also provided a basis for increased understanding of the transport of analytes in natural systems. Coliphage were frequently detected in onsite wastewater. Coliphage concentrations in onsite wastewater were highly variable, ranging from less than 1 to 3,000,000 plaque forming units per 100 milliliters. Coliphage were occasionally detected (eight occurrences) at low concentrations in samples from wells located downgradient from onsite wastewater treatment system drainfield lines. However, coliphage concentrations were below method detection limits in replicate or repeat samples collected from the eight sites. The consistent absence of coliphage detections in the replicate or repeat samples is interpreted to indicate

WIPP conceptual design report. Addendum D. A report to Holmes and Narver, Inc., Anaheim, California on alternative energy sources for Waste Isolation Pilot Plant, Carlsbad, New Mexico

International Nuclear Information System (INIS)

1977-03-01

This report presents the results of a technical and economic analysis of alternative methods of meeting the energy needs of a proposed Waste Isolation Pilot Plant (WIPP) to be located in southeastern New Mexico. The WIPP is a facility for underground storage of radioactive wastes in a deep salt bed. The report analyzes a total of sixteen possible methods for meeting WIPP energy requirements, consisting of purchased electricity and on-site generation in various combinations from full purchased to full on-site

Procurement Specifications Templates for On-Site Solar Photovoltaic: For Use in Developing Federal Solicitations

Energy Technology Data Exchange (ETDEWEB)

Robinson, G. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-01-16

With the increasing adaption of on-site renewable energy systems designed to feed site loads, there is a critical need to develop tools that allow the federal sector to become a mature and sophisticated consumer. This document is intended to reduce project development and operational risks while increasing the speed at which projects are completed; two necessary components to reach the scale required to meet mandates and achieve cost savings for taxpayers. This guide is intended to act as a living document where lessons learned from the increasing number of projects can be incorporated and provide guidance for efforts. While additional guides will be developed to cover other renewable technologies, this guide covers on-site solar photovoltaic systems with an emphasis on third-party designed, financed, owned, and operated systems.

Lessons learned -- a comparison of the proposed on-site waste management facilities at the various Department of Energy sites

International Nuclear Information System (INIS)

Ciocco, J.; Singh, D.; Survochak, S.; Elo, M.

1996-01-01

The Department of Energy Sites (DOE) are faced with the challenge of managing several categories of waste generated from past or future cleanup activities, such as 11(e)2 byproduct material, low-level radioactive (LL), low-level radioactive mixed (LLM), transuranic (TRU), high level radioactive (HL), and hazardous waste (HW). DOE must ensure safe and efficient management of these wastes while complying with all applicable federal and state laws. Proposed waste management strategies for the EM-40 Environmental Restoration (ER) program at these sites indicate that on-site disposal is becoming a viable option. For purposes of this paper, on-site disposal cells managed by the EM-40 program at Hanford, Weldon Spring, Fernald Environmental Management Project (FEMP) and Rocky Flats were compared. Programmatic aspects and design features were evaluated to determine what comparisons can be made, and to identify benefits lessons learned that may be applicable to other sites. Based on comparative analysis, it can be concluded that the DOE EM-40 disposal cells are very unique. Stakeholders played a major role in the decision to locate the various DOE on-site disposal facilities. The disposal cells will be used to manage 11(e)2 by-product materials, LL, LLM, and/or HLW. The analysis further suggests that the design criteria are comparable. Lessons learned relative to the public involvement activities at Weldon Spring, and the design approach at Hanford should be considered when planning future on-site disposal facilities at DOE sites. Further, a detailed analysis of progress made at Hanford should be evaluated for application at sites such as Rocky Flats that are currently planning on-site disposal facilities

Recolecta: estado actual y perspectivas

OpenAIRE

López Medina, Alicia

2010-01-01

Estado actual del Recolector de ciencia abierta español: Recolecta y proyectos de futuro. López Medina, A. (2010). Recolecta: estado actual y perspectivas. X Workshop Rebiun sobre proyectos digitales. http://hdl.handle.net/10251/8710.

Modelling the adoption of industrial cogeneration in Japan using manufacturing plant survey data

International Nuclear Information System (INIS)

Bonilla, David; Akisawa, Atsushi; Kashiwagi, Takao

2003-01-01

Electric power deregulation in Japan opens opportunity for further penetration of on-site generation (cogeneration) otherwise known as distributed generation. In the paper the authors present a survey on Japanese industrial plants to fill existing gaps for the assessment of modern cogeneration (combined heat and power, CHP). The objective of the paper is to empirically examine CHP systems based on cross-sectional binary models; second to review diffusion trends of CHP by system vintage during the 1980-2000 period in the manufacturing sector. The econometric results point that the probabilities of embracing this technology increase, in declining importance, with on-site power consumption, and steam demand, operational hours as well as with payback period, purchased power. For example the survey shows that the CHP is used for the purpose of exporting power rather than meeting the plant's own consumption. Some of our results are in line with those of Dismukes and Kleit (Resource Energy Econ. 21 (1999) 153) as well with Rose and Macdonald (Energy J. 12(12) (1991) 47). We also find that a unit increase in satisfaction with CHP will lead to a 54% in CHP capacity. We find significant evidence on the cost effectiveness of CHP under conservative assumptions. Regarding the influence of satisfaction and performance indicators for the several plants, the survey threw some unexpected evidence on the nature of CHP

Customer adoption of small-scale on-site power generation

Energy Technology Data Exchange (ETDEWEB)

Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

2001-04-01

The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system.

Customer adoption of small-scale on-site power generation

International Nuclear Information System (INIS)

Siddiqui, Afzal S.; Marnay, Chris; Hamachi, Kristina S.; Rubio, F. Javier

2001-01-01

The electricity supply system is undergoing major regulatory and technological change with significant implications for the way in which the sector will operate (including its patterns of carbon emissions) and for the policies required to ensure socially and environmentally desirable outcomes. One such change stems from the rapid emergence of viable small-scale (i.e., smaller than 500 kW) generators that are potentially competitive with grid delivered electricity, especially in combined heat and power configurations. Such distributed energy resources (DER) may be grouped together with loads in microgrids. These clusters could operate semi-autonomously from the established power system, or macrogrid, matching power quality and reliability more closely to local end-use requirements. In order to establish a capability for analyzing the effect that microgrids may have on typical commercial customers, such as office buildings, restaurants, shopping malls, and grocery stores, an economic mod el of DER adoption is being developed at Berkeley Lab. This model endeavors to indicate the optimal quantity and type of small on-site generation technologies that customers could employ given their electricity requirements. For various regulatory schemes and general economic conditions, this analysis produces a simple operating schedule for any installed generators. Early results suggest that many commercial customers can benefit economically from on-site generation, even without considering potential combined heat and power and reliability benefits, even though they are unlikely to disconnect from the established power system

Packaging design criteria (onsite) project W-520 immobilized low-activity waste transportation system

International Nuclear Information System (INIS)

BOEHNKE, W.M.

2001-01-01

A plan is currently in place to process the high-level radioactive wastes that resulted from uranium and plutonium recovery operations from Spent Nuclear Fuel at the Hanford Site, Richland, Washington. Currently, millions of gallons of high-level radioactive waste in the form of liquids, sludges, and saltcake are stored in many large underground tanks onsite. This waste will be processed and separated into high-level and low-activity fractions. Both fractions will then be vitrified (i.e., blended with molten borosilicate glass) in order to encapsulate the toxic radionuclides. The immobilized low-activity waste (ILAW) glass will be poured into LAW canisters, allowed to cool and harden to solid form, sealed by welding, and then transported to a double-lined trench in the 200 East Area for permanent disposal. This document presents the packaging design criteria (PDC) for an onsite LAW transportation system, which includes the ILAW canister, ILAW package, and transport vehicle and defines normal and accident conditions. This PDC provides the basis for the ILAW onsite transportation system design and fabrication and establishes the transportation safety criteria that the design will be evaluated against in the Package Specific Safety Document (PSSD). It provides the criteria for the ILAW canister, cask and transport vehicles and defines normal and accident conditions. The LAW transportation system is designed to transport stabilized waste from the vitrification facility to the ILAW disposal facility developed by Project W-520. All ILAW transport will take place within the 200 East Area (all within the Hanford Site)

A study for good regulatin of the CANDU's in Korea. Development of safety regulatory requirement for CANDU nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Oh, Se Ki; Shin, Y. K.; Kim, J. S.; Yu, Y. J.; Lee, Y. J. [Ajou Univ., Suwon (Korea, Republic of)

2001-03-15

The objective of project is to derive the policy recommendations to improve the efficiency of CANDU plants regulation. These policy recommendations will eventually contribute to the upgrading of Korean nuclear regulatory system and safety enhancement. During the first phase of this 2 years study, following research activities were done. On-site survey and analysis on CANDU plants regulation. Review on CANDU plants regulating experiences and current constraints. Review and analysis on the new Canadian regulatory approach.

Relations between variously available fractions of trace metals in the soil and their actual plant-uptake

International Nuclear Information System (INIS)

Bujtas, K.; Csillag, J.

1999-01-01

In a pot experiment, availabilities of Cd, Cr, Ni, Pb, and Zn added to the soil as metal nitrates or as enrichment of sewage sludge were evaluated by comparing concentrations of their total potentially available, presumably plant-available and directly plant-available forms in the soil. At excessively increasing soil contamination, the plant-available concentrations increased more than the total soil contents, thus the relative availabilities of the metals increased. This was reflected in the amounts taken up by the young maize test plants and in the plant/soil transfer factors. Transfer factors calculated for the 'plant-available' soil metal contents depended less on the contamination level than those based on total soil metal contents. Refs. 8 (author)

CTBT on-site inspections

Science.gov (United States)

Zucca, J. J.

2014-05-01

On-site inspection (OSI) is a critical part of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The OSI verification regime provides for international inspectors to make a suite of measurements and observations on site at the location of an event of interest. The other critical component of the verification regime is the International Monitoring System (IMS), which is a globally distributed network of monitoring stations. The IMS along with technical monitoring data from CTBT member countries, as appropriate, will be used to trigger an OSI. After the decision is made to carry out an OSI, it is important for the inspectors to deploy to the field site rapidly to be able to detect short-lived phenomena such as the aftershocks that may be observable after an underground nuclear explosion. The inspectors will be on site from weeks to months and will be working with many tens of tons of equipment. Parts of the OSI regime will be tested in a field exercise in the country of Jordan late in 2014. The build-up of the OSI regime has been proceeding steadily since the CTBT was signed in 1996 and is on track to becoming a deterrent to someone considering conducting a nuclear explosion in violation of the Treaty.

Demonstration of an on-site PAFC cogeneration system with waste heat utilization by a new gas absorption chiller

Energy Technology Data Exchange (ETDEWEB)

Urata, Tatsuo [Tokyo Gas Company, LTD, Tokyo (Japan)

1996-12-31

Analysis and cost reduction of fuel cells is being promoted to achieve commercial on-site phosphoric acid fuel cells (on-site FC). However, for such cells to be effectively utilized, a cogeneration system designed to use the heat generated must be developed at low cost. Room heating and hot-water supply are the most simple and efficient uses of the waste heat of fuel cells. However, due to the short room-heating period of about 4 months in most areas in Japan, the sites having demand for waste heat of fuel cells throughout the year will be limited to hotels and hospitals Tokyo Gas has therefore been developing an on-site FC and the technology to utilize tile waste heat of fuel cells for room cooling by means of an absorption refrigerator. The paper describes the results of fuel cell cogeneration tests conducted on a double effect gas absorption chiller heater with auxiliary waste heat recovery (WGAR) that Tokyo Gas developed in its Energy Technology Research Laboratory.

Testing in support of on-site storage of residues in the Pipe Overpack Container

International Nuclear Information System (INIS)

Ammerman, D.J.; Bobbe, J.G.; Arviso, M.

1997-02-01

The disposition of the large back-log of plutonium residues at the Rocky Flats Environmental Technology Site (Rocky Flats) will require interim storage and subsequent shipment to a waste repository. Current plans call for disposal at the Waste Isolation Pilot Plant (WIPP) and the transportation to WIPP in the TRUPACT-II. The transportation phase will require the residues to be packaged in a container that is more robust than a standard 55-gallon waste drum. Rocky Flats has designed the Pipe Overpack Container to meet this need. It is desirable to use this same waste packaging for interim on-site storage in non-hardened buildings. To meet the safety concerns for this storage the Pipe Overpack Container has been subjected to a series of tests at Sandia National Laboratories in Albuquerque, New Mexico. In addition to the tests required to qualify the Pipe Overpack Container as a waste container for shipment in the TRUPACT-II several tests were performed solely for the purpose of qualifying the container for interim storage. This report will describe these tests and the packages response to the tests. 12 figs., 3 tabs

Actual status and future outlook of Fukushima prefecture for accepting power plants

International Nuclear Information System (INIS)

Origasa, Yoshiro

1976-01-01

The fundamental attitude of Fukushima prefecture to wrestle with nuclear power generation is explained after having described the details of inviting nuclear power plants. The prefecture intends to promote the nuclear power development in cooperation with the government, related cities, towns and villages, and electric power companies, and to develop the Futaba area, the coastal region of Pacific Ocean belonging to the low-developed area, by turning it to the base of nuclear power generation. The prefecture has improved its organization to strengthen to nuclear power administration. The prefecture also has concluded the convention on the security for nuclear power plants with Tokyo Electric Power Co. It takes care of the propagation of knowledge concerning nuclear energy and is endeavoring to provide the accurate and impartial information. The problem in promoting nuclear power generation is nothing but to obtain the consensus of inhabitants for the location of nuclear power plants. Problems on warm water discharge, employment, and of enterprises in the area inroad are to be considered on the basis of the coexistence and coprosperity of local community and power stations. The prefecture needs more powerful public relations on nuclear power, security, and fulfillment of the policy for environmental preservation, and enforcement of environmental assessment, by the government. It also demands that the enterprises complete the system that they can have their own function of the environment control. The abundant related reference are added at the end. (Wakatsuki, Y.)

Rapid on-site evaluation of axillary fine-needle aspiration cytology in breast cancer.

LENUS (Irish Health Repository)

O'Leary, D P

2012-06-01

Axillary ultrasonography (AUS) and fine-needle aspiration cytology (FNAC) can establish axillary lymph node status before surgery, although this technique is hampered by poor adequacy rates. To achieve consistently high rates of FNAC adequacy, rapid on-site evaluation (ROSE) of FNAC samples was introduced.

Nuclear power plant Isar. Actualized environmental statement 2012 on the consolidated environmental statement 2010

International Nuclear Information System (INIS)

2012-01-01

The actualized environmental statement 2012 for the NPP Isar covers the following issues: Direct environmental aspects: heat dissipation to the environment, water management, radioactive matter release onto the environment, environmental monitoring, waste management, operational materials supply, radioactive materials transport, safety of the nuclear facilities, remote monitoring and information system, environmental protection, communication; indirect environmental aspects; core indicators according EMAS III, development of the environmental targets and programs, reference to the valid environmental regulations, declaration of the environmental consultant.

Marijuana and actual driving performance

Science.gov (United States)

1993-11-01

This report concerns the effects of marijuana smoking on actual driving performance. It presents the results of one pilot and three actual driving studies. The pilot study's major purpose was to establish the THC dose current marijuana users smoke to...

Utility of low-order linear nuclear-power-plant models in plant diagnostics and control

International Nuclear Information System (INIS)

Tylee, J.L.

1981-01-01

A low-order, linear model of a pressurized water reactor (PWR) plant is described and evaluated. The model consists of 23 linear, first-order difference equations and simulates all subsystems of both the primary and secondary sides of the plant. Comparisons between the calculated model response and available test data show the model to be an adequate representation of the actual plant dynamics. Suggested use for the model in an on-line digital plant diagnostics and control system are presented

Quality assurance and quality control at the joint IAEA NMCC On-Site Laboratory at RRP as a contribution to the inspectorate's review of near real time accountancy of nuclear material

International Nuclear Information System (INIS)

Ludwig, R.; Duhamel, G.; Raptis, K.; Mayorov, V.; Sato, Y.; Hara, S.; Itoh, Y.; Hayakawa, T.

2011-01-01

This paper provides updates on the elements of the quality management system (QMS) of the On-Site Laboratory for nuclear safeguards at the Rokkasho Reprocessing Plant. Representative examples of the OSL's quality control levels are discussed, such as analytical method performance review, method inter-comparison and participation in Laboratory inter-comparison exercises. It also highlights quality assurance measures to continuously improve the data quality within the boundary conditions of a high throughput industrial laboratory operating according to the guidelines of ISO 17025 and to meet the requirements of the ITV's on method uncertainties. (author)

Analytical quality control concept in the Euratom on-site laboratories

International Nuclear Information System (INIS)

Mayer, K.; Duinslaeger, L.; Cromboom, O.; Ottmar, H.; Wojnowski, D.; Vegt, H. van der

2001-01-01

Full text: Two on-site laboratories have been developed, installed, commissioned and put into routine operation by the Euratom safeguards office (ESO), jointly with the Institute for Transuranium Elements (ITU). These laboratories are operated by ITU staff and provide verification measurement results on samples taken by Euratom inspectors. The analysts work in weekly changing shift teams, manage the laboratories and operate the various analytical techniques. Operating such a laboratory at a remote location, without a senior scientist immediately available in case of problems, The existing boundary conditions challenge the robustness of the entire laboratory, i.e. comprising staff and instrumentation. In order to continuously ensure a high degree of reliability of the measurement results, a stringent quality control system was implemented. The quality control concept for the two on-site laboratories was developed at a very early stage and implemented in the pre-OSL training facility at ITU. This enabled to thoroughly test and develop further the concept. At the same time the analysts get acquainted with the quality control procedures in place and they are instilled with the principles. The quality control concept makes use of a fully computerized data management and data acquisition system. All measurement devices, including balances, density meters, mass spectrometers, passive neutron counter, hybrid K-edge instrument, gamma spectrometers and alpha spectrometers are networked and data exchange is performed on electronic basis. A specifically developed laboratory information management system collects individual measurement data, calculates intermediate and final result and shares the information with a quality control module. In order to ensure the reliability of the results, which are reported to the ESO inspectorate, five levels of quality control were implemented. The present paper describes in detail the different levels of quality control, which check the

A business case for on-site generation: The BD biosciences pharmingen project

Energy Technology Data Exchange (ETDEWEB)

Firestone, Ryan; Creighton, Charles; Bailey, Owen; Marnay, Chris; Stadler, Michael

2003-09-01

Deregulation is haltingly changing the United States electricity markets. The resulting uncertainty and/or rising energy costs can be hedged by generating electricity on-site and other benefits, such as use of otherwise wasted heat, can be captured. The Public Utility Regulatory Policy Act (PURPA) of 1978 first invited relatively small-scale generators ({ge} 1 MW) into the electricity market. The advent of efficient and reliable small scale and renewable equipment has spurred an industry that has, in recent years, made even smaller (business scale) electricity generation an economically viable option for some consumers. On-site energy capture and/or conversion, known as distributed energy resources (DER), offers consumers many benefits, such as economic savings and price predictability, improved reliability, control over power quality, and emissions reductions. Despite these benefits, DER adoption can be a daunting move to a customer accustomed to simply paying a monthly utility bill. San Diego is in many ways an attractive location for DER development: It has high electricity prices typical of California and a moderate climate i.e. energy loads are consistent throughout the year. Additionally, the price shock to San Diego Gas and Electric (SDG&E) customers during the summer of 2000 has interested many in alternatives to electricity price vulnerability. This report examines the business case for DER at the San Diego biotechnology supply company, BD Biosciences Pharmingen, which considered DER for a building with 200-300 kW base-load, much of which accommodates the refrigerators required to maintain chemicals. Because of the Mediterranean climate of the San Diego area and the high rate of air changes required due to on-site use of chemicals, modest space heating is required throughout the year. Employees work in the building during normal weekday business hours, and daily peak loads are typically about 500 kW.

Lessons Learned from the On-Site Disposal Facility at Fernald Closure Project

International Nuclear Information System (INIS)

Kumthekar, U.A.; Chiou, J.D.

2006-01-01

The On-Site Disposal Facility (OSDF) at the U.S. Department of Energy's (DOE) Fernald Closure Project near Cincinnati, Ohio is an engineered above-grade waste disposal facility being constructed to permanently store low level radioactive waste (LLRW) and treated mixed LLRW generated during Decommissioning and Demolition (D and D) and soil remediation performed in order to achieve the final land use goal at the site. The OSDF is engineered to store 2.93 million cubic yards of waste derived from the remediation activities. The OSDF is intended to isolate its LLRW from the environment for at least 200 years and for up to 1,000 years to the extent practicable and achievable. Construction of the OSDF started in 1997 and waste placement activities will complete by the middle of April 2006 with the final cover (cap) placement over the last open cell by the end of Spring 2006. An on-site disposal alternative is considered critical to the success of many large-scale DOE remediation projects throughout the United States. However, for various reasons this cost effective alternative is not readily available in many cases. Over the last ten years Fluor Fernald Inc. has cumulated many valuable lessons learned through the complex engineering, construction, operation, and closure processes of the OSDF. Also in the last several years representatives from other DOE sites, State agencies, as well as foreign government agencies have visited the Fernald site to look for proven experiences and practices, which may be adapted for their sites. This paper present a summary of the major issues and lessons leaned at the Fernald site related to engineering, construction, operation, and closure processes for the disposal of remediation waste. The purpose of this paper is to share lessons learned and to benefit other projects considering or operating similar on-site disposal facilities from our successful experiences. (authors)

7 CFR 1437.101 - Actual production history.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The APH...

On-site ocean horizontal aerosol extinction coefficient inversion under different weather conditions on the Bo-hai and Huang-hai Seas

Science.gov (United States)

Zeng, Xianjiang; Xia, Min; Ge, Yinghui; Guo, Wenping; Yang, Kecheng

2018-03-01

In this paper, we explore the horizontal extinction characteristics under different weather conditions on the ocean surface with on-site experiments on the Bo-hai and Huang-hai Seas in the summer of 2016. An experimental lidar system is designed to collect the on-site experimental data. By aiming at the inhomogeneity and uncertainty of the horizontal aerosol in practice, a joint retrieval method is proposed to retrieve the aerosol extinction coefficients (AEC) from the raw data along the optical path. The retrieval results of both the simulated and the real signals demonstrate that the joint retrieval method is practical. Finally, the sequence observation results of the on-site experiments under different weather conditions are reported and analyzed. These results can provide the attenuation information to analyze the atmospheric aerosol characteristics on the ocean surface.

Analytical investigation of the thermal optimization of biogas plants; Analytische Untersuchung der thermischen Optimierung von Biogasanlagen

Energy Technology Data Exchange (ETDEWEB)

Knauer, Thomas [Rostock Univ. (Germany). Lehrstuhl Abfall- und Stoffstromwirtschaft; Ing. Buero Energietechnik, Niebuell (Germany); Scholwin, Frank [Institut fuer Biogas, Kreislaufwirtschaft und Energie, Weimar (Germany); Nelles, Michael [Rostock Univ. (Germany). Lehrstuhl Abfall- und Stoffstromwirtschaft; DBFZ Deutsches Biomasseforschungszentrum gemeinnuetzige GmbH, Leipzig (Germany)

2015-07-01

The economic efficiency of biogas plants is more difficult to display with recent legal regulations than with bonus tariff systems of previous EEG amendments. To enhance efficiency there are different options, often linked with further investments. Direct technical innovations with fast economic yields need exact evaluation of limiting conditions. Within this article the heat sector of agricultural biogas plants is studied. So far scarcely considered, especially the improvement of on-site thermal energy consumption promises a high optimisation. Data basis are feeding protocols and temperature measurements of input substrates, biogas, environment etc., also documentations of on-site thermal consumption over 10 years. Analyzing first results of measurements and primary equilibrations shows, that maintenance of biogas process temperature consumes most thermal energy and therefore has the greatest potential of improvement. Passive and active insulation of feed systems and heat recovery from secondary fermenter liquids are identified as first optimization measures. Depending on amount and temperature raise of input substrates, saving potentials of more than hundred megawatt hours per year were calculated.

Reducing Demand Charges and Onsite Generation Variability Using Behind-the-Meter Energy Storage

Energy Technology Data Exchange (ETDEWEB)

Bhattarai, Bishnu P.; Myers, Kurt S.; Bush, Jason W.

2017-04-01

Electric utilities in the United States are increasingly employing demand charges and/or real-time pricing. This directive is bringing potential opportunities in deploying behindthe-meter energy storage (BMES) systems for various grid functionalities. This study quantifies techno-economic benefits of BMES in reducing demand charge and smoothing load/generation intermittencies, and determines how those benefits vary with onsite distributed photovoltaic. We proposed a two-stage control algorithm, whereby the first stage proactively determines costoptimal BMES configuration for reducing peak-demands and demand charges, and the second stage adaptively compensates intermittent generations and short load spikes that may otherwise increase the demand charges. The performance of the proposed algorithm is evaluated through a 24 hours time sweep simulation performed using data from smart microgrid testbed at Idaho National Laboratory (INL). The simulation results demonstrated that this research provides a simple but effective solution for peak shaving, demand charge reductions, and smoothing onsite PV variability.

Small-scale integrated demonstration of high-level radioactive waste processing and vitrification using actual SRP waste

International Nuclear Information System (INIS)

Woolsey, G.B.; Baumgarten, P.K.; Eibling, R.E.; Ferguson, R.B.

1981-01-01

A small-scale pilot plant for chemical processing and vitrification of actual high-level waste has been constructed at the Savannah River Laboratory (SRL). This fully integrated facility has been constructed in six shielded cells and has eight major unit operations. Equipment performance and processing characteristics of the unit operations are reported

77 FR 48550 - Technicolor Creative Services, Post Production Feature Mastering Division Including On-Site...

Science.gov (United States)

2012-08-14

... Services, Post Production Feature Mastering Division Including On-Site Leased Workers From Ajilon... Services, Post Production Feature Mastering Division, Hollywood, California (subject firm). The worker... the workers meet the eligibility requirements of the Trade Act of 1974. Conclusion After careful...

75 FR 77664 - Honeywell International, Inc., Automation and Control Solutions Division, Including On-Site...

Science.gov (United States)

2010-12-13

..., Inc., Automation and Control Solutions Division, Including On-Site Leased Workers From Manpower... Solutions Division. The Department has determined that these workers were sufficiently under the control of Honeywell International, Inc., Automation and Control Solutions Division to be considered leased workers...

Wastewater treatment and reuse. Indian power plant turns sewage into process water

Energy Technology Data Exchange (ETDEWEB)

Langer, S.; Schroedter, F.; Demmerle, C. [ERM Lahmeyer International, Neu-Isenburg (Germany)

2000-07-01

Lahmeyer International provided consulting services for a private Indian investor of a 200 MW diesel engine power plant, in reviewing and controlling the EPC Contractor from Korea with regard to the treatment plant for dosmestic wastewater and the reverse osmosis plant for desalination. The wastewater treatment and subsequent water treatment for cooling water production comprised: mechanical treatment, biological treatment of domestic wastewater, lime softening, sand filtration, disinfection, micro-filtration, reverse osmosis. The services as Owner's Engineer included: (1) the review of the EPC Contractor's treatment concept, (2) the selection of internationally renowned manufacturer, (3) the review of the detailed design (including civil, mechanical, electrical and I and C work), and (4) onsite technical assistance to the Client during construction and commissioning phase. (orig.)

Probabilistic approach to external cloud dose calculations using onsite meteorological data

International Nuclear Information System (INIS)

Strenge, D.L.; Watson, E.C.; Bander, T.J.; Kennedy, W.E.

1976-01-01

A method is described for calculation of external total body and skin doses from accidental atmospheric releases of radionuclides based on hourly onsite meteorological data. The method involves calculation of dose values from a finite size cloud for each hourly observation for a given radionuclide inventory. These values are then used to determine the probability of occurrence of dose levels for specified release times ranging from one hour to 30 days

AMCO On-Site Air Monitoring Map Service, Oakland CA, Live 2017, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — This map service contains the following layers: All On-Site Air Monitors, TCE, PCE, and Vinyl Chloride. The layers draws at all scales. Full FGDC metadata for the...

Dataset on Investigating the role of onsite learning in the optimisation of craft gang's productivity in the construction industry.

Science.gov (United States)

Ugulu, Rex Asibuodu; Allen, Stephen

2017-12-01

The data presented in this article is an original data on "Investigating the role of onsite learning in the optimisation of craft gang's productivity in the construction industry". This article describes the constraints influencing craft gang's productivity and the influence of onsite learning on the blockwork craft gang's productivity. It also presented the method of data collection, using a semi-structured interview and an observation method to collect data from construction organisations. We provided statistics on the top most important constraints affecting the craft gang's productivity using 3-D Bar charts. In addition, we computed the correlation coefficients and the regression model on the influence of onsite learning on craft gang's productivity using the man-hour as the dependent variable. The relationship between blockwork inputs and cycle numbers was determined at 5% significance level. Finally, we presented data information on the application of the learning curve theory using the unit straight-line model equations and computed the learning rate of the observed craft gang's blockwork repetitive work.

Review of pathogen treatment reductions for onsite non-potable reuse of alternative source waters

Science.gov (United States)

Communities face a challenge when implementing onsite reuse of collected waters for non-potable purposes given the lack of national microbial standards. Quantitative Microbial Risk Assessment (QMRA) can be used to predict the pathogen risks associated with the non-potable reuse o...

Base case industrial reprocessing plant

International Nuclear Information System (INIS)

1978-11-01

This paper briefly describes an industrial scale plant for reprocessing thermal oxide fuel. This description was used as a base case by the Group for their later assessments and for comparing actual national plans for reprocessing plants. The plant described uses the Purex process and assumes an annual throughput of 1000 t/U. The maintenance, safety and safeguards philosophy is described. An indication of the construction schedule and capital and operating costs is also given

European Council of Legal Medicine (ECLM) principles for on-site forensic and medico-legal scene and corpse investigation.

Science.gov (United States)

Cusack, D; Ferrara, S D; Keller, E; Ludes, B; Mangin, P; Väli, M; Vieira, N

2017-07-01

Forensic medical practitioners need to define the general principles governing procedures to be used for the on-site examination of a body where the death has occurred in unnatural, violent or suspicious circumstances. These principles should be followed whenever a medical expert is required to perform an on-site corpse inspection and should be utilised as a set of general guidelines to be adapted to the specific situation in hand and interpreted using common sense and scientific knowledge of the relevant procedures and facts of the case. The aim of these principles is to ensure that forensic evidence at the scene of a death is properly observed and assessed and all necessary relevant evidence gathered in order to ensure that a comprehensive report is available to the judicial authority (investigating judge or coroner) in the justice system. The on-site corpse inspection by a forensic practitioner is a mandatory and essential stage of the forensic and medico-legal autopsy, as it may provide important information for subsequent investigation stages.

Using Process Load Cell Information for IAEA Safeguards at Enrichment Plants

International Nuclear Information System (INIS)

Laughter, Mark D.; Whitaker, J. Michael; Howell, John

2010-01-01

Uranium enrichment service providers are expanding existing enrichment plants and constructing new facilities to meet demands resulting from the shutdown of gaseous diffusion plants, the completion of the U.S.-Russia highly enriched uranium downblending program, and the projected global renaissance in nuclear power. The International Atomic Energy Agency (IAEA) conducts verification inspections at safeguarded facilities to provide assurance that signatory States comply with their treaty obligations to use nuclear materials only for peaceful purposes. Continuous, unattended monitoring of load cells in UF 6 feed/withdrawal stations can provide safeguards-relevant process information to make existing safeguards approaches more efficient and effective and enable novel safeguards concepts such as information-driven inspections. The IAEA has indicated that process load cell monitoring will play a central role in future safeguards approaches for large-scale gas centrifuge enrichment plants. This presentation will discuss previous work and future plans related to continuous load cell monitoring, including: (1) algorithms for automated analysis of load cell data, including filtering methods to determine significant weights and eliminate irrelevant impulses; (2) development of metrics for declaration verification and off-normal operation detection ('cylinder counting,' near-real-time mass balancing, F/P/T ratios, etc.); (3) requirements to specify what potentially sensitive data is safeguards relevant, at what point the IAEA gains on-site custody of the data, and what portion of that data can be transmitted off-site; (4) authentication, secure on-site storage, and secure transmission of load cell data; (5) data processing and remote monitoring schemes to control access to sensitive and proprietary information; (6) integration of process load cell data in a layered safeguards approach with cross-check verification; (7) process mock-ups constructed to provide simulated load

Advanced Separations at SRS

International Nuclear Information System (INIS)

Thompson, M.C.

1998-03-01

The Savannah River Site (SRS) has many waste streams which are contaminated with radionuclides and/or hazardous materials which must be treated to remove the radioactivity (Cs, Sr, tritium, actinides) and hazardous components (polychlorinated biphenyls, cyanide, metal ions). This task provides test beds for ESP-developed separations materials and technologies using actual SRS waste streams. The work includes different SRS waste streams; high level waste solutions presently stored in underground tanks onsite, water recycled from the waste vitrification plant, and reactor basin water in excess facilities

The AP1000R nuclear power plant innovative features for extended station blackout mitigation

International Nuclear Information System (INIS)

Vereb, F.; Winters, J.; Schulz, T.; Cummins, E.; Oriani, L.

2012-01-01

Station Blackout (SBO) is defined as 'a condition wherein a nuclear power plant sustains a loss of all offsite electric power system concurrent with turbine trip and unavailability of all onsite emergency alternating current (AC) power system. Station blackout does not include the loss of available AC power to buses fed by station batteries through inverters or by alternate AC sources as defined in this section, nor does it assume a concurrent single failure or design basis accident...' in accordance with Reference 1. In this paper, the innovative features of the AP1000 plant design are described with their operation in the scenario of an extended station blackout event. General operation of the passive safety systems are described as well as the unique features which allow the AP1000 plant to cope for at least 7 days during station blackout. Points of emphasis will include: - Passive safety system operation during SBO - 'Fail-safe' nature of key passive safety system valves; automatically places the valve in a conservatively safe alignment even in case of multiple failures in all power supply systems, including normal AC and battery backup - Passive Spent Fuel Pool cooling and makeup water supply during SBO - Robustness of AP1000 plant due to the location of key systems, structures and components required for Safe Shutdown - Diverse means of supplying makeup water to the Passive Containment Cooling System (PCS) and the Spent Fuel Pool (SFP) through use of an engineered, safety-related piping interface and portable equipment, as well as with permanently installed onsite ancillary equipment. (authors)

Mobile robot teleoperation system for plant inspection based on collecting and utilizing environment data

International Nuclear Information System (INIS)

Kawabata, Kuniaki; Watanabe, Nobuyasu; Asama, Hajime; Kita, Nobuyuki; Yang, Hai-quan

2004-01-01

This paper describes about development of a mobile robot teleoperation system for plant inspection. In our system, the robot is an agent for collecting the environment data and is also teleoperated by the operator utilizing such accumulated environment data which is displayed on the operation interface. The robot equips many sensors for detecting the state of the robot and the environment. Such redundant sensory system can be also utilized to collect the working environment data on-site while the robot is patrolling. Here, proposed system introduces the framework of collecting and utilizing environment data for adaptive plant inspection using the teleoperated robot. A view simulator is primarily aiming to facilitate evaluation of the visual sensors and algorithms and is also extended as the Environment Server, which is the core technology of the digital maintenance field for the plant inspection. In order to construct detailed seamless digital maintenance field mobile robotic technology is utilized to supply environment data to the server. The sensory system on the robot collect the environment data on-site and such collected data is uploaded to the Environment Server for compiling accurate digital environment data base. The robot operator also can utilize accumulated environment data by referring to the Environment Server. In this paper, we explain the concept of our teleoperation system based on collecting and utilizing environment data. Using developed system, inspection patrol experiments were attempted in the plant mock-up. Experimental results are shown by using an omnidirectional mobile robot with sensory system and the Environment Server. (author)

Life cycle assessment of greenhouse gas emissions, water and land use for concentrated solar power plants with different energy backup systems

International Nuclear Information System (INIS)

Klein, Sharon J.W.; Rubin, Edward S.

2013-01-01

Concentrated solar power (CSP) is unique among intermittent renewable energy options because for the past four years, utility-scale plants have been using an energy storage technology that could allow a CSP plant to operate as a baseload renewable energy generator in the future. No study to-date has directly compared the environmental implications of this technology with more conventional CSP backup energy options. This study compares the life cycle greenhouse gas (GHG) emissions, water consumption, and direct, onsite land use associated with one MW h of electricity production from CSP plants with wet and dry cooling and with three energy backup systems: (1) minimal backup (MB), (2) molten salt thermal energy storage (TES), and (3) a natural gas-fired heat transfer fluid heater (NG). Plants with NG had 4–9 times more life cycle GHG emissions than plants with TES. Plants with TES generally had twice as many life cycle GHG emissions as the MB plants. Dry cooling reduced life cycle water consumption by 71–78% compared to wet cooling. Plants with larger backup capacities had greater life cycle water consumption than plants with smaller backup capacities, and plants with NG had lower direct, onsite life cycle land use than plants with MB or TES. - highlights: • We assess life cycle environmental effects of concentrated solar power (CSP). • We compare CSP with three energy backup technologies and two cooling technologies. • We selected solar field area to minimize energy cost for plants with minimal backup and salt storage. • Life cycle greenhouse gas emissions were 4–9 times lower with thermal energy storage than with fossil fuel backup. • Dry cooling reduced life cycle water use by 71–78% compared to wet cooling

The Temporal Perspective in Higher Education Learners: Comparisons between Online and Onsite Learning

Science.gov (United States)

Romero, Margarida; Usart, Mireia

2014-01-01

Higher Education increases flexibility with online learning solutions. Nevertheless, dropout rates in online university are large. Among the reasons, one aspect deserving further study is students' Time Perspective (TP), which has been studied in onsite HE. It is necessary to know the TP profile of the growing population of online students, and…

On-site audits to investigate the quality of radiation physics of radiation therapy institutions in the Republic of Korea.

Science.gov (United States)

Park, Jong Min; Park, So-Yeon; Chun, Minsoo; Kim, Sang-Tae

2017-08-01

To investigate and improve the domestic standard of radiation therapy in the Republic of Korea. On-site audits were performed for 13 institutions in the Republic of Korea. Six items were investigated by on-site visits of each radiation therapy institution, including collimator, gantry, and couch rotation isocenter check; coincidence between light and radiation fields; photon beam flatness and symmetry; electron beam flatness and symmetry; physical wedge transmission factors; and photon beam and electron beam outputs. The average deviations of mechanical collimator, gantry, and couch rotation isocenter were less than 1mm. Those of radiation isocenter were also less than 1mm. The average difference between light and radiation fields was 0.9±0.6mm for the field size of 20cm×20cm. The average values of flatness and symmetry of the photon beams were 2.9%±0.6% and 1.1%±0.7%, respectively. Those of electron beams were 2.5%±0.7% and 0.6%±1.0%, respectively. Every institutions showed wedge transmission factor deviations less than 2% except one institution. The output deviations of both photon and electron beams were less than ±3% for every institution. Through the on-site audit program, we could effectively detect an inappropriately operating linacs and provide some recommendations. The standard of radiation therapy in Korea is expected to improve through such on-site audits. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Achievement report for fiscal 1981 on Sunshine Program-assisted project. Data 4. Development of coal liquefaction technology/Development of solvent extraction liquefaction technology/Development of brown coal solvent extraction plant (Development of 50t/d pilot plant); 1981 nendo sekitan ekika gijutsu no kaihatsu seika hokokusho (Shiryo 4). Yozai chushutsu ekika gijutsu no kaihatsu (kattankei yozai chushutsu plant no kaihatsu (50ton/nichi pilot plant no kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Research is conducted for the development of a liquefaction plant (50t/d pilot plant) for Australia's Victorian brown coal. In fiscal 1981, using the process concept and design data obtained through the study of elements, a detailed design of a primary hydrogenation system is drawn, part of the equipment is procured, and on-site construction work is started. The book is a collection of materials which include instrumentation-related drawings covering an instrumentation loop sketch, instrument inspection specifications (flow meter, level gage, pressure gage, thermometer, regulation meter, analyzing meter, signal receiving meter, and instrument board), general specifications for electrical instrumentation facilities, etc. (NEDO)

Achievement report for fiscal 1981 on Sunshine Program-assisted project. Data 4. Development of coal liquefaction technology/Development of solvent extraction liquefaction technology/Development of brown coal solvent extraction plant (Development of 50t/d pilot plant); 1981 nendo sekitan ekika gijutsu no kaihatsu seika hokokusho (Shiryo 4). Yozai chushutsu ekika gijutsu no kaihatsu (kattankei yozai chushutsu plant no kaihatsu (50ton/nichi pilot plant no kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Research is conducted for the development of a liquefaction plant (50t/d pilot plant) for Australia's Victorian brown coal. In fiscal 1981, using the process concept and design data obtained through the study of elements, a detailed design of a primary hydrogenation system is drawn, part of the equipment is procured, and on-site construction work is started. The book is a collection of materials which include instrumentation-related drawings covering an instrumentation loop sketch, instrument inspection specifications (flow meter, level gage, pressure gage, thermometer, regulation meter, analyzing meter, signal receiving meter, and instrument board), general specifications for electrical instrumentation facilities, etc. (NEDO)

75 FR 69471 - Smurfit-Stone Container Corporation, Containerboard Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2010-11-12

... Corporation, Containerboard Mill, Including On-Site Leased Workers From KMW Enterprises, Ontonagon, MI... to workers of Smurfit-Stone Container Corporation, Containerboard Mill, Ontonagon, Michigan. The... Ontonagon, Michigan location of Smurfit-Stone Container Corporation, Containerboard Mill. The Department has...

76 FR 2144 - Quest Diagnostics, Inc. Information Technology Help Desk Services Including On-Site Leased...

Science.gov (United States)

2011-01-12

.... Information Technology Help Desk Services Including On-Site Leased Workers From Modis, West Norriton, PA..., applicable to workers of Quest Diagnostics, Inc., Information Technology Help Desk Services, West Norriton... Quest Diagnostics, Inc., Information Technology Help Desk [[Page 2145

75 FR 49526 - Halliburton Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel...

Science.gov (United States)

2010-08-13

... Company, Duncan Mfg., Including On-Site Leased Workers from Express Personnel, Clayton Personnel Service, and Manpower Planning, Duncan, OK; Halliburton Company, Technology and Engineering Division, Finance... Halliburton Company, Technology and Engineering Division, and Finance and Administration Division, Duncan...

Optimal estimation and control in nuclear power plants

International Nuclear Information System (INIS)

Purviance, J.E.; Tylee, J.L.

1982-08-01

Optimal estimation and control theories offer the potential for more precise control and diagnosis of nuclear power plants. The important element of these theories is that a mathematical plant model is used in conjunction with the actual plant data to optimize some performance criteria. These criteria involve important plant variables and incorporate a sense of the desired plant performance. Several applications of optimal estimation and control to nuclear systems are discussed

Isotope Investigations at an Alpine Karst Aquifer by Means of On-Site Measurements with High Time Resolution and Near Realtime Data Availability

Energy Technology Data Exchange (ETDEWEB)

Leis, A.; Plieschnegger, M.; Harum, T.; Stadler, H. [Joanneum Research, Institute for Water, Energy and Resources, Graz (Austria); Schmitt, R. [Meteorologie Consult GmbH, Koenigstein (Germany); Van Pelt, A. [Picarro Inc., Sunnyvale, California (United States); Zerobin, W. [Vienna Waterworks, Vienna (Austria)

2013-07-15

For a lot of hydrological isotope investigations it would be helpful to conduct on-site measurements with a very high time resolution. Recent developments of a highly sensitive gas analyser on the basis of so called 'Cavity Ring Down Spectroscopy' (CRDS) has lead to a new class of on-site capable measuring devices, the wavelength scanned (WS)-CRDS. In the framework of a new project it succeeded for the first time in measuring the stable environmental isotopes of the water on-site and on-line at one of the most important karst springs in Austria. It was necessary, to adapt the WS-CRDS system for on-site application. Particularly the sampling device had to be adopted to get samples from the flow of the spring to the WS-CDRS system in real time. The system was installed at the spring during snowmelt with measuring intervals of fewer than 10 minutes. This measuring device was combined with a near real time data transmission system, based on LEO satellites. This allowed a dissemination of the data via the internet and, for registered users, also a download possibility of the data. (author)

Balance-of-plant outage availability study. Phase I. Extension report

International Nuclear Information System (INIS)

Thomasson, F.R.

1978-09-01

After completion of the Phase 1 Refueling Outage Availability Study, Babcock and Wilcox and the U.S. Department of Energy entered into a supplemental agreement to perform a balance-of-plant maintenance, inspection, and test study with the cooperation of Duke Power Company and Arkansas Power and Light Company. The objectives were (1) to expand the Phase 1 data base, including balance-of-plant activities, to reduce outage time and increase plant availability and (2) to conduct an onsite review of plant maintenance, practices to complement the utility efforts in reducing outage time and increasing on-line operational time. Data were obtained from (1) observations during the 1977 refueling outage at Oconee 3, (2) review of maintenance practices during the Arkansas Nuclear One, Unit 1, operational cycle in 1977, and (3) selected observations of the 1978 refueling outage at ANO-1. Accumulated data were then reviewed and analyzed to produce a list of improvement recommendations for Oconee 3 and ANO-1 that can be generically applied to plants of similar design and construction

Life cycle management for equipments in nuclear plants based on reliability and actual conditions

International Nuclear Information System (INIS)

Dalin, Wang; Jingquan, Liu; Peng, Liu

2010-01-01

Life cycle management model based on reliability includes two parts: obtaining failure rate function and founding cost-oriented model to solve. It is actually a single objective programming whose optimal solution is the most economical replacement period. Parameters of failure rate function are estimated by Weibull process fitting with the method of maximum likelihood. The objective function of the model is life-cost function where the dependent variable is replacement period T, with the constraints of failure rate or availability. After foundation of LCM model, we solve it to find the optimal replacement period for the equipments. (authors)

Budget and Actuals

Data.gov (United States)

Town of Chapel Hill, North Carolina — This dataset contains the Town's Year-to-Date Budget and Actuals for Fiscal Years 2016, 2017, and 2018. Fiscal years run from July 1 to June 30. The data comes from...

Nuclear power plants maintenance

International Nuclear Information System (INIS)

Anon.

1988-01-01

Nuclear power plants maintenance now appears as an important factor contributing to the competitivity of nuclea energy. The articles published in this issue describe the way maintenance has been organized in France and how it led to an actual industrial activity developing and providing products and services. An information note about Georges Besse uranium enrichment plant (Eurodif) recalls that maintenance has become a main data not only for power plants but for all nuclear industry installations. (The second part of this dossier will be published in the next issue: vol. 1 January-February 1989) [fr

Pendekatan Pelatihan On-Site dan Step by Step untuk Optimalisasi Fungsi Guru dalam Pembelajaran

Directory of Open Access Journals (Sweden)

Moch. Sholeh Y.A. Ichrom

2016-02-01

Full Text Available Remoteness of programme content from teachers' real work situation and unsuitability of approach employed were suspected as main reasons contributing to the failure of many inservise teacher training programmes. A step by step, onsite teacher training (SSOTT model was tried out in this experiment to study if the weakness of inservise programmes could be rectified. As it was tried out in relation with kindergarten mathemathics it was then called SSOTT-MTW (Step by Step Onsite Teacher Training-Methemathics Their Way model. Eighty four kindergartens were involved, in which 84 teachers and 877 pupils were recruited as experimental subjects. The teachers were devided into three group. One group was instructed by using One Period Teacher Training (OPOTT-MTW model, second group was trained with SSOTT-MTW model and the last group was given no training (NTT at all. Result of the experiment showed that the other groups. It was also shown that pupil and parents participation in teaching-learning activities also significantly improved.

Onsite assessments for the Department of Energy Laboratory Accreditation Program

International Nuclear Information System (INIS)

McMahan, K.L.

1992-01-01

For Department of Energy (DOE) facilities, compliance with DOE Order 5480.11 became a requirement in January 1989. One of the requirements of this Order is that personal external dosimetry programs be accredited under the Department of Energy's Laboratory Accreditation Program (DOELAP) in Personnel Dosimetry. The accreditation process, from the facility's perspective, is two-fold: dosimeters must meet performance criteria in radiation categories appropriate for each facility, and personnel administering and carrying out the program must demonstrate good operating practices. The DOELAP onsite assessment is designed to provide an independent evaluation of the latter

Monitoring support system for nuclear power plant

International Nuclear Information System (INIS)

Higashikawa, Yuichi; Kubota, Rhuji; Tanaka, Keiji; Takano, Yoshiyuki

1996-01-01

The nuclear power plants in Japan reach to 49 plants and supply 41.19 million kW in their installed capacities, which is equal to about 31% of total electric power generation and has occupied an important situation as a stable energy supplying source. As an aim to keeping safe operation and working rate of the power plants, various monitoring support systems using computer technology, optical information technology and robot technology each advanced rapidly in recent year have been developed to apply to the actual plants for a plant state monitoring system of operators in normal operation. Furthermore, introduction of the emergent support system supposed on accidental formation of abnormal state of the power plants is also investigated. In this paper, as a monitoring system in the recent nuclear power plants, design of control panel of recent central control room, introduction to its actual plant and monitoring support system in development were described in viewpoints of improvement of human interface, upgrade of sensor and signal processing techniques, and promotion of information service technique. And, trend of research and development of portable miniature detector and emergent monitoring support system are also introduced in a viewpoint of labor saving and upgrade of the operating field. (G.K.)

76 FR 13666 - Pitney Bowes, Inc., Mailing Solutions Management, Global Engineering Group, Including On-Site...

Science.gov (United States)

2011-03-14

...., Mailing Solutions Management, Global Engineering Group, Including On-Site Leased Workers From Guidant... workers and former workers of Pitney Bowes, Inc., Mailing Solutions Management Division, Engineering... reviewed the certification to clarify the subject worker group's identity. Additional information revealed...

Chemical Hygiene Plan for Onsite Measurement and Sample Shipping Facility Activities

International Nuclear Information System (INIS)

Price, W.H.

1998-01-01

This chemical hygiene plan presents the requirements established to ensure the protection of employee health while performing work in mobile laboratories, the sample shipping facility, and at the onsite radiological counting facility. This document presents the measures to be taken to promote safe work practices and to minimize worker exposure to hazardous chemicals. Specific hazardous chemicals present in the mobile laboratories, the sample shipping facility, and in the radiological counting facility are presented in Appendices A through G

On-site interim storage of spent nuclear fuel: Emerging public issues

International Nuclear Information System (INIS)

Feldman, D.L.; Tennessee Univ., Knoxville, TN

1992-01-01

Failure to consummate plans for a permanent repository or above- ground interim Monitored Retrievable Storage (MRS) facility for spent nuclear fuel has spurred innovative efforts to ensure at-reactor storage in an environmentally safe and secure manner. This article examines the institutional and socioeconomic impacts of Dry Cask Storage Technology (DCST)-an approach to spent fuel management that is emerging as the preferred method of on-site interim spent fuel storage by utilities that exhaust existing storage capacity

Polymeric ionic liquid-based portable tip microextraction device for on-site sample preparation of water samples.

Science.gov (United States)

Chen, Lei; Pei, Junxian; Huang, Xiaojia; Lu, Min

2018-06-05

On-site sample preparation is highly desired because it avoids the transportation of large-volume samples and ensures the accuracy of the analytical results. In this work, a portable prototype of tip microextraction device (TMD) was designed and developed for on-site sample pretreatment. The assembly procedure of TMD is quite simple. Firstly, polymeric ionic liquid (PIL)-based adsorbent was in-situ prepared in a pipette tip. After that, the tip was connected with a syringe which was driven by a bidirectional motor. The flow rates in adsorption and desorption steps were controlled accurately by the motor. To evaluate the practicability of the developed device, the TMD was used to on-site sample preparation of waters and combined with high-performance liquid chromatography with diode array detection to measure trace estrogens in water samples. Under the most favorable conditions, the limits of detection (LODs, S/N = 3) for the target analytes were in the range of 4.9-22 ng/L, with good coefficients of determination. Confirmatory study well evidences that the extraction performance of TMD is comparable to that of the traditional laboratory solid-phase extraction process, but the proposed TMD is more simple and convenient. At the same time, the TMD avoids complicated sampling and transferring steps of large-volume water samples. Copyright © 2018 Elsevier B.V. All rights reserved.

The use of modern on-site bioremediation systems to reduce crude oil contamination on oilfield properties

International Nuclear Information System (INIS)

Hildebrandt, W.W.; Wilson, S.B.

1991-01-01

Oil-field properties frequently have areas in which the soil has been degraded with crude oil. Soil contaminated in this manner is often considered either a hazardous waste or designated waste under regulatory guidelines. As a result, there is often concern about an owner's liabilities and the financial institution's liabilities whenever oilfield properties are transferred to new operators, abandoned, or converted to other uses such as real estate. There is also concern about the methods and relative costs to remediate soil which has been contaminated with crude oil. Modern, well-designed, soil bioremediation systems are cost effective for the treatment of crude oil contamination, and these systems can eliminate an owner's subsequent liabilities. Compared to traditional land-farming practices, a modern on-site bioremediation system (1) requires significantly less surface area, (2) results in lower operating costs, and (3) provides more expeditious results. Compared to excavation and off-site disposal of the contaminated soil, on-site bioremediation will eliminate subsequent liabilities and is typically more cost effective. Case studies indicate that o-site bioremediation systems have been successful at reducing the crude oil contamination in soil to levels which are acceptable to regulatory agencies in less than 10 weeks. Total costs for on-site bioremediation has ranged from $35 to $40 per cubic yard of treated soil, including excavation

The AP1000{sup R} nuclear power plant innovative features for extended station blackout mitigation

Energy Technology Data Exchange (ETDEWEB)

Vereb, F.; Winters, J.; Schulz, T.; Cummins, E.; Oriani, L. [Westinghouse Electric Company LLC, 1000 Westinghouse Drive, Cranberry Township, PA 16066 (United States)

2012-07-01

Station Blackout (SBO) is defined as 'a condition wherein a nuclear power plant sustains a loss of all offsite electric power system concurrent with turbine trip and unavailability of all onsite emergency alternating current (AC) power system. Station blackout does not include the loss of available AC power to buses fed by station batteries through inverters or by alternate AC sources as defined in this section, nor does it assume a concurrent single failure or design basis accident...' in accordance with Reference 1. In this paper, the innovative features of the AP1000 plant design are described with their operation in the scenario of an extended station blackout event. General operation of the passive safety systems are described as well as the unique features which allow the AP1000 plant to cope for at least 7 days during station blackout. Points of emphasis will include: - Passive safety system operation during SBO - 'Fail-safe' nature of key passive safety system valves; automatically places the valve in a conservatively safe alignment even in case of multiple failures in all power supply systems, including normal AC and battery backup - Passive Spent Fuel Pool cooling and makeup water supply during SBO - Robustness of AP1000 plant due to the location of key systems, structures and components required for Safe Shutdown - Diverse means of supplying makeup water to the Passive Containment Cooling System (PCS) and the Spent Fuel Pool (SFP) through use of an engineered, safety-related piping interface and portable equipment, as well as with permanently installed onsite ancillary equipment. (authors)

Actual state of plant decline phenomena due to acid rain and others

International Nuclear Information System (INIS)

Yokobori, Makoto

1992-01-01

Recently, Japanese mass communication earnestly reports on the effect that acid rain exerts to natural environment. Also the researches have been carried out on the present state of rainwater acidification, the mechanism of the effect of acid rain to plants, the experiment using artificial acid rain, and the foreign theories on the cause of the decline of forests. But the example of the damage of trees and plants in fields, of which the true cause is understood to be acid rain, is not found. The author has engaged in the research on forest protection for long years, and according to his experience, in the present Japanese research on acid rain, there are a number of important pitfalls. Acid rain theory is only one of many hypotheses. It must be verified by the proper research, and this point is important. Ibaraki Prefectural Forest Experiment station has carried out the consultation on the diagnosis and restoration of tree conditions, and the decline of trees and its cause are reported according to the examples of investigation. In the consultation in the last nine years, the decline of trees caused by acid rain was not confirmed. (K.I.)

77 FR 40637 - Smurfit-Stone Container Corporation, Containerboard Mill, Including On-Site Leased Workers From...

Science.gov (United States)

2012-07-10

... Corporation, Containerboard Mill, Including On-Site Leased Workers From KMW Enterprises and General Security... Assistance on May 6, 2010, applicable to workers of Smurfit-Stone Container Corporation, Containerboard Mill... Ontonagon, Michigan location of Smurfit-Stone Container Corporation, Containerboard Mill, Ontonagon...

76 FR 19467 - Weyerhaeuser Company, Corporate Headquarters Including On-Site Leased Workers From Volt Services...

Science.gov (United States)

2011-04-07

... employed on-site at the Federal Way, Washington location of Weyerhaeuser Company, Corporate Headquarters... Company, Corporate Headquarters to be considered leased workers. Based on these findings, the Department... Federal Way, Washington location of Weyerhaeuser Company, Corporate Headquarters. The amended notice...

75 FR 70688 - Actel Corporation, Currently Known as Microsemi Corporation, Including On-Site Leased Workers...

Science.gov (United States)

2010-11-18

..., Accountants, Inc. and Accountant Temps Mountain View, CA; Amended Certification Regarding Eligibility To Apply... on-site leased workers from ATR International, Accountants, Inc., and Accountant Temps, Mountain View... a separate unemployment insurance (UI) tax account under the name Microsemi Corporation. Accordingly...

The impact of safety analyses on the design of the Hanford Waste Vitrification Plant

International Nuclear Information System (INIS)

Koppenaal, T.J.; Yee, A.K.; Reisdorf, J.B.; Hall, B.W.

1993-04-01

Accident analyses are being performed to evaluate and document the safety of the Hanford Waste Vitrification Plant (HWVP). The safety of the HWVP is assessed by evaluating worst-case accident scenarios and determining the dose to offsite and onsite receptors. Air dispersion modeling is done with the GENII computer code. Three accidents are summarized in this paper, and their effects on the safety and the design of the HWVP are demonstrated

Risks and mitigation options for on-site storage of wastewater from shale gas and tight oil development

International Nuclear Information System (INIS)

Kuwayama, Yusuke; Roeshot, Skyler; Krupnick, Alan; Richardson, Nathan; Mares, Jan

2017-01-01

We provide a critical review of existing research and information regarding the sources of risk associated with on-site shale gas and tight oil wastewater storage in the United States, the gaps that exist in knowledge regarding these risks, policy and technology options for addressing the risks, and the relative merits of those options. Specifically, we (a) identify the potential risks to human and ecological health associated with on-site storage of shale gas and tight oil wastewater via a literature survey and analysis of data on wastewater spills and regulatory violations, (b) provide a detailed description of government regulations or industry actions that may mitigate these risks to human and ecological health, and (c) provide a critical review of this information to help generate progress toward concrete action to make shale gas and tight oil development more sustainable and more acceptable to a skeptical public, while keeping costs down. - Highlights: • We review current research/information on shale gas and tight oil wastewater storage. • Pit overflows, tank overfills, and liner malfunctions are common spill causes. • Tanks lead to smaller and less frequent spills than pits, but are not a magic bullet. • State regulations for on-site oil and gas wastewater storage are very heterogeneous.

Good practice at Onagawa power plant during the 3.11 Great East Japan Earthquake

International Nuclear Information System (INIS)

Wakabayashi, Toshiaki

2016-01-01

This paper describes the situation of Onagawa Nuclear Power Station after The off the Pacific Coast of Tohoku Earthquake on March 11, 2011: (1) outline of situation of nuclear power plant Unit 1, 2 and 3, (2) assumption of push wave from the recognition of the tsunami due to large earthquakes that occurred in the past and tsunami countermeasures, and securement of cooling function at the time of push/pull wave based on emergency seawater pumps, (3) installation of handrail sticks on the central control room monitoring and control panel as a countermeasure from the lessons from the past earthquakes, (4) improvement of the seismic tolerance of facilities, and (5) earthquake resistant reinforcement of main office building and new construction of a seismic isolation office building. As response to emergency situation, the following are described: (1) unification of external response service at the head office, and the helicopter transportation of goods due to power plant needs as the power station support from the head office, and (2) as the countermeasures of on-site power plant, the duplication of information transmission route and the survey/examination and countermeasures by individual teams for each problem (especially, fire at Unit 1 and seawater infiltration at Unit 2). In additive, through the emergency response at the time of The off the Pacific Coast of Tohoku Earthquake, this paper examined the required qualities of an on-site commander based on the experience stories of persons concerned. (A.O.)

Agriculture on Mars: Soils for Plant Growth

Science.gov (United States)

Ming, D. W.

2016-01-01

Robotic rovers and landers have enabled the mineralogical, chemical, and physical characterization of loose, unconsolidated materials on the surface of Mars. Planetary scientists refer to the regolith material as "soil." NASA is currently planning to send humans to Mars in the mid 2030s. Early missions may rely on the use of onsite resources to enable exploration and self-sufficient outposts on Mars. The martian "soil" and surface environment contain all essential plant growth elements. The study of martian surface materials and how they might react as agricultural soils opens a new frontier for researchers in the soil science community. Other potential applications for surface "soils" include (i) sources for extraction of essential plant-growth nutrients, (ii) sources of O2, H2, CO2, and H2O, (iii) substrates for microbial populations in the degradation of wastes, and (iv) shielding materials surrounding outpost structures to protect humans, plants, and microorganisms from radiation. There are many challenges that will have to be addressed by soil scientists prior to human exploration over the next two decades.

Innovative AE and NDT techniques for on-site measurement of concrete and masonry structures state-of-the-art report of the RILEM technical committee 239-MCM

CERN Document Server

2016-01-01

This volume, in which on-site measurements of concrete and masonry structures by NDT techniques are comprehensively summarized, focuses on the visualization procedure of the results measured. The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. The book will therefore be of great value to the field. .

[Analysis on on-site rescue and traumatic features of victims involved in gas explosion accident in Hangzhou].

Science.gov (United States)

Wang, X G; Jin, R H; Liu, F P; Han, C M

2017-10-20

Objective: To investigate the situations of on-site rescue and traumatic features of victims involved in gas explosion accident in Hangzhou, so as to provide more data support for emergency medical rescues of the similar incidents of massive casualty. Methods: Two medical workers with a certain clinical experience were sent to Hangzhou 120 emergency medical centers to collect data of the on-site rescue on 21st July, 2017, including ambulance call-outs, on-site command and traffic conditions, and on-site triage and evacuation of the victims. They were then sent to the hospitals receiving the victims to investigate the situations of these victims including the general information (such as gender, age, admitted hospitals, and number of admission, discharge, and transferring in the first two weeks after the accident) and injury assessment [such as injury position and type, injury severity evaluation by New Injury Severity Scoring (NISS), and burn severity evaluation for victims with burns]. Results: (1) A total of 15 ambulances reached the accident site for rescue. The traffic and transportation were jammed and interrupted after this accident. On-site triage and distribution were disorderly conducted. (2) Clinical data of 53 victims were collected, including 24 males and 29 females, with the age of 8 to 70 (34±14) years old. They were sent into 6 hospitals in Hangzhou. Two victims died on the day of accident. Up to two weeks after this accident, 28 (52.8%) victims were discharged from the hospitals and received follow-up in outpatient department. Five victims with severe injuries were transferred to the other hospitals. (3) Based on the results of NISS, the injury severities were mild in 29 (54.7%) cases, moderate in 9 (17.0%) cases, serious in 3 (5.7%) cases, and severe in 12 (22.6%) cases. Those 2 dead victims were classified into the severe category due to the highest NISS score of 75. For all of the victims, skin and soft tissue defects were most common. Six (11

Critical management practices influencing on-site waste minimization in construction projects.

Science.gov (United States)

Ajayi, Saheed O; Oyedele, Lukumon O; Bilal, Muhammad; Akinade, Olugbenga O; Alaka, Hafiz A; Owolabi, Hakeem A

2017-01-01

As a result of increasing recognition of effective site management as the strategic approach for achieving the required performance in construction projects, this study seeks to identify the key site management practices that are requisite for construction waste minimization. A mixed methods approach, involving field study and survey research were used as means of data collection. After confirmation of construct validity and reliability of scale, data analysis was carried out through a combination of Kruskal-Wallis test, descriptive statistics and exploratory factor analysis. The study suggests that site management functions could significantly reduce waste generation through strict adherence to project drawings, and by ensuring fewer or no design changes during construction process. Provision of waste skips for specific materials and maximisation of on-site reuse of materials are also found to be among the key factors for engendering waste minimization. The result of factor analysis suggests four factors underlying on-site waste management practices with 96.093% of total variance. These measures include contractual provisions for waste minimization, waste segregation, maximisation of materials reuse and effective logistic management. Strategies through which each of the underlying measures could be achieved are further discussed in the paper. Findings of this study would assist construction site managers and other site operatives in reducing waste generated by construction activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Summary of wind data from nuclear power plant sites. [USA

Energy Technology Data Exchange (ETDEWEB)

Verholek, M. G.

1977-03-01

A summary of wind data from nuclear power plant sites is presented. National Weather Service archives are an immediately obvious source of wind data, but additional data sources are also available. Utility companies proposing to build nuclear power plants are required to establish on-site meteorological monitoring programs that include towers for collecting wind and temperature data for use in environmental impact assessments. These data are available for more than one hundred planned or operating nuclear power plant sites. A list of the sites, by state, is provided in Appendix A, while Appendix B contains an alphabetical list of the sites. This site wind data provides a valuable addition to the existing NWS data sets, and significantly enlarges the multilevel data presently available. The wind data published through the NRC is assembled and assessed here in order to provide a supplement to existing data sets.

Meteorology in site operations

International Nuclear Information System (INIS)

Anon.

1986-01-01

During the site selection and design phases of a plant, meteorological assistance must be based on past records, usually accumulated at stations not actually on the site. These preliminary atadvices will be averages and extremes that might be expected. After a location has been chosen and work has begun, current and forecast weather conditions become of immediate concern. On-site meteorological observations and forecasts have many applications to the operating program of an atomic energy site. Requirements may range from observations of the daily minimum temperatures to forecasts of radiation dosages from airborne clouds

Individual plant care in cropping systems

OpenAIRE

Griepentrog, Hans W.; Nørremark, Michael; Nielsen, Henning; Blackmore, Simon

2003-01-01

Individual plant care cropping systems, embodied in precision farming, may lead to new opportunities in agricultural crop management. The objective of the project was to provide high accuracy seed position mapping of a field of sugar beet. An RTK GPS was retrofitted on to a precision seeder to map the seeds as they were planted. The average error between the seed map and the actual plant map was about 32 mm to 59 mm. The results showed that the overall accuracy of the estimated plant position...

75 FR 11922 - Apria Healthcare, Including On-Site Leased Workers From Corestaff, Ultimate Staffing (Roth...

Science.gov (United States)

2010-03-12

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,054C] Apria Healthcare..., 2009, applicable to workers of Apria Healthcare, including on-site leased workers from Corestaff... subject firm. The workers are engaged in activities related to the information technology and patient...

78 FR 52982 - Regal Beloit Corporation; Springfield, Missouri Division Including On-site Leased Workers From...

Science.gov (United States)

2013-08-27

... these workers were sufficiently under the control of the subject firm to be considered leased workers...; Springfield, Missouri Division Including On-site Leased Workers From Penmac Personnel Services and GCA Services Group Springfield, Missouri; Amended Certification Regarding Eligibility to Apply for Worker...

76 FR 72978 - Whirlpool Corporation Including On-Site Leased Workers From Career Solutions TEC Staffing...

Science.gov (United States)

2011-11-28

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,593] Whirlpool Corporation Including On-Site Leased Workers From Career Solutions TEC Staffing, Andrews International, IBM Corporation... workers are engaged in the production of refrigerators and trash compactors. The notice was published in...

Education, training and work experience among nuclear power plant workers

International Nuclear Information System (INIS)

Blair, L.M.; Doggette, J.

1980-01-01

This paper uses a unique data set to examine the prior work experience, training, and education of skilled and technical workers in United States nuclear power plants. The data were collected in the latter half of 1977 by the International Brotherhood of Electrical Workers (IBEW) in a survey of union locals in nuclear power plants. The survey results provided substantial evidence that workers in United States nuclear power plants have a relatively high level of education, training, and skill development. Analysis of average education by age did not reveal any significant differences in years of schooling between younger and older workers. Very high rates of participation in formal training programmes were reported by all types of workers. The most common type of training programme was held on-site at the power plant and was provided by utility personnel. The majority of workers reported previous work experience related to nuclear power plant activities. Almost one-third of the workers had been directly involved in nuclear energy in a previous job, the majority of these through the United States Navy nuclear programme. However, the newer plants are hiring relatively fewer persons with previous nuclear experience. (author)

Estimation of CO2 emission from water treatment plant--model development and application.

Science.gov (United States)

Kyung, Daeseung; Kim, Dongwook; Park, Nosuk; Lee, Woojin

2013-12-15

A comprehensive mathematical model developed for this study was used to compare estimates of on-site and off-site CO2 emissions, from conventional and advanced water treatment plants (WTPs). When 200,000 m(3) of raw water at 10 NTU (Nepthelometric Turbidity Unit) was treated by a conventional WTP to 0.1 NTU using aluminum sulfate as a coagulant, the total CO2 emissions were estimated to be 790 ± 228 (on-site) and 69,596 ± 3950 (off-site) kg CO2e/d. The emissions from an advanced WTP containing micro-filtration (MF) membrane and ozone disinfection processes; treating the same raw water to 0.005 NTU, were estimated to be 395 ± 115 (on-site) and 38,197 ± 2922 (off-site) kg CO2e/d. The on-site CO2 emissions from the advanced WTP were half that from the conventional WTP due to much lower use of coagulant. On the other hand, off-site CO2 emissions due to consumption of electricity were 2.14 times higher for the advanced WTP, due to the demands for operation of the MF membrane and ozone disinfection processes. However, the lower use of chemicals in the advanced WTP decreased off-site CO2 emissions related to chemical production and transportation. Overall, total CO2 emissions from the conventional WTP were 1.82 times higher than that from the advanced WTP. A sensitivity analysis was performed for the advanced WTP to suggest tactics for simultaneously reducing CO2 emissions further and enhancing water quality. Copyright © 2013 Elsevier Ltd. All rights reserved.

Dry Ice Blast Decontamination to in-service equipment in Japanese PWR plant

International Nuclear Information System (INIS)

2016-01-01

MHI had developed several mechanical decontamination methods. Mechanical decontamination is beneficial when it is applied to equipment whose surface is narrow. Especially in terms of secondary waste reduction, MHI started the study of application of Dry Ice Blast Decontamination to actual PWR plant. This paper provides an introduction to Dry Ice Blast Decontamination principle, its system and actual application result to PWR plant. (J.P.N.)

Comparing the Scoring of Human Decomposition from Digital Images to Scoring Using On-site Observations.

Science.gov (United States)

Dabbs, Gretchen R; Bytheway, Joan A; Connor, Melissa

2017-09-01

When in forensic casework or empirical research in-person assessment of human decomposition is not possible, the sensible substitution is color photographic images. To date, no research has confirmed the utility of color photographic images as a proxy for in situ observation of the level of decomposition. Sixteen observers scored photographs of 13 human cadavers in varying decomposition stages (PMI 2-186 days) using the Total Body Score system (total n = 929 observations). The on-site TBS was compared with recorded observations from digital color images using a paired samples t-test. The average difference between on-site and photographic observations was -0.20 (t = -1.679, df = 928, p = 0.094). Individually, only two observers, both students with human decomposition based on digital images can be substituted for assessments based on observation of the corpse in situ, when necessary. © 2017 American Academy of Forensic Sciences.

On-Site Fecal Sludge Treatment with the Anaerobic Digestion Pasteurization Latrine

OpenAIRE

Forbis-Stokes, Aaron A.; O'Meara, Patrick F.; Mugo, Wangare; Simiyu, Gelas M.; Deshusses, Marc A.

2016-01-01

Abstract The Anaerobic Digestion Pasteurization Latrine (ADPL) is a self-contained and energy neutral on-site sanitation system using anaerobic digestion of fecal sludge to generate biogas and then uses the biogas to pasteurize the digester effluent at 65?75?C to produce a safe effluent that can be reused locally as a fertilizer. Two ADPL systems were installed on residential plots with 17 and 35 residents in a peri-urban area outside of Eldoret, Kenya. Each system comprised three toilets bui...

Reasons for opening an onsite day care and its success factors

OpenAIRE

Klemenšek Rakun, Tanja

2014-01-01

The purpose of this master thesis is to evaluate different authors’ opinion and to analyze and identify the factors that would help improve family’s living standards. Reasons for which a company would open onsite daycare center are looked for. This evolves factors such as: work-life balance, more free time for family, a higher degree of emotional connection between parents and children in case of private child care within the company, a better public reputation for companies etc. These facto...

Monitoring of the energy performance of a district heating CHP plant based on biomass boiler and ORC generator

International Nuclear Information System (INIS)

Prando, Dario; Renzi, Massimiliano; Gasparella, Andrea; Baratieri, Marco

2015-01-01

More than seventy district heating (DH) plants based on biomass are operating in South Tyrol (Italy) and most of them supply heat to residential districts. Almost 20% of them are cogenerative systems, thus enabling primary energy savings with respect to the separate production of heat and power. However, the actual performance of these systems in real operation can considerably differ from the nominal one. The main objectives of this work are the assessment of the energy performance of a biomass boiler coupled with an Organic Rankine Cycle (i.e. ORC) generator under real operating conditions and the identification of its potential improvements. The fluxes of energy and mass of the plant have been measured onsite. This experimental evaluation has been supplemented with a thermodynamic model of the ORC generator, calibrated with the experimental data, which is capable to predict the system performance under different management strategies of the system. The results have highlighted that a decrease of the DH network temperature of 10 °C can improve the electric efficiency of the ORC generator of one percentage point. Moreover, a DH temperature reduction could decrease the main losses of the boiler, namely the exhaust latent thermal loss and the exhaust sensible thermal loss, which account for 9% and 16% of the boiler input power, respectively. The analysis of the plant has pointed out that the ORC pump, the flue gases extractor, the thermal oil pump and the condensation section fan are the main responsible of the electric self-consumption. Finally, the negative effect of the subsidisation on the performance of the plant has been discussed. - Highlights: • Energy performance of a biomass boiler coupled to an ORC turbine in real operation. • Potential improvements of a CHP plant connected to a DH network. • Performance prediction by means of a calibrated ORC thermodynamic model. • Influence of the DH temperature on the electric efficiency. • Impact of the

Benchmarking of RESRAD-OFFSITE : transition from RESRAD (onsite) to RESRAD-OFFSITE and comparison of the RESRAD-OFFSITE predictions with peercodes

International Nuclear Information System (INIS)

Yu, C.; Gnanapragasam, E.; Cheng, J.-J.; Biwer, B.

2006-01-01

The main purpose of this report is to document the benchmarking results and verification of the RESRAD-OFFSITE code as part of the quality assurance requirements of the RESRAD development program. This documentation will enable the U.S. Department of Energy (DOE) and its contractors, and the U.S. Nuclear Regulatory Commission (NRC) and its licensees and other stakeholders to use the quality-assured version of the code to perform dose analysis in a risk-informed and technically defensible manner to demonstrate compliance with the NRC's License Termination Rule, Title 10, Part 20, Subpart E, of the Code of Federal Regulations (10 CFR Part 20, Subpart E); DOE's 10 CFR Part 834, Order 5400.5, ''Radiation Protection of the Public and the Environment''; and other Federal and State regulatory requirements as appropriate. The other purpose of this report is to document the differences and similarities between the RESRAD (onsite) and RESRAD-OFFSITE codes so that users (dose analysts and risk assessors) can make a smooth transition from use of the RESRAD (onsite) code to use of the RESRAD-OFFSITE code for performing both onsite and offsite dose analyses. The evolution of the RESRAD-OFFSITE code from the RESRAD (onsite) code is described in Chapter 1 to help the dose analyst and risk assessor make a smooth conceptual transition from the use of one code to that of the other. Chapter 2 provides a comparison of the predictions of RESRAD (onsite) and RESRAD-OFFSITE for an onsite exposure scenario. Chapter 3 documents the results of benchmarking RESRAD-OFFSITE's atmospheric transport and dispersion submodel against the U.S. Environmental Protection Agency's (EPA's) CAP88-PC (Clean Air Act Assessment Package-1988) and ISCLT3 (Industrial Source Complex-Long Term) models. Chapter 4 documents the comparison results of the predictions of the RESRAD-OFFSITE code and its submodels with the predictions of peer models. This report was prepared by Argonne National Laboratory's (Argonne

Plant analyzer for high-speed interactive simulation of BWR plant transients

International Nuclear Information System (INIS)

Cheng, H.S.; Lekach, S.V.; Mallen, A.N.; Wulff, W.; Cerbone, R.J.

1984-01-01

A combination of advanced modeling techniques and modern, special-purpose peripheral minicomputer technology was utilized to develop a plant analyzer which affords realistic predictions of plant transients and severe off-normal events in LWR power plants through on-line simulations at speeds up to 10 times faster than actual process speeds. The mathematical models account for nonequilibrium, nonhomogeneous two-phase flow effects in the coolant, for acoustical effects in the steam line and for the dynamics of the entire balance of the plant. Reactor core models include point kinetics with reactivity feedback due to void fraction, fuel temperature, coolant temperature, and boron concentration as well as a conduction model for predicting fuel and clad temperatures. Control systems and trip logic for plant protection systems are also simulated. The AD10 of Applied Dynamics International, a special-purpose peripheral processor, is used as the principal hardware of the plant analyzer

Cost/risk/benefit analysis report on the decontamination and decommissioning of Z-plant

International Nuclear Information System (INIS)

Melvin, J.P.; Sexton, R.A.; Fort, M.L.; Nunn, S.E.

1979-01-01

This study was performed to estimate the cost of decontaminating and decommissioning Z-Plant. All of the buildings in the Z-Plant exclusion area except Building 2736-Z, the plutonium storage vault, are included in the study. The study also excludes all underground facilities within the exclusion area which are not contained within a building and all Z-Plant related facilities outside the perimeter fence. The contamination in Z-Plant is primarily 239 Pu which has a half-life of 24,360 years. Because of the long half-life of 239 Pu, it is not practical to consider the isolation of the facility to await reduction of the contamination level by natural decay. Therefore, this study analyzes the costs, risk and benefit of decontaminating Z-Plant to four different levels of residual contamination. The three principle criteria used in the analysis are cost, the risk of offsite dose to the public, and the occupational exposure to onsite personnel

Cost/risk/benefit analysis report on the decontamination and decommissioning of Z-plant

Energy Technology Data Exchange (ETDEWEB)

Melvin, J. P.; Sexton, R. A.; Fort, M. L.; Nunn, S. E.

1979-09-28

This study was performed to estimate the cost of decontaminating and decommissioning Z-Plant. All of the buildings in the Z-Plant exclusion area except Building 2736-Z, the plutonium storage vault, are included in the study. The study also excludes all underground facilities within the exclusion area which are not contained within a building and all Z-Plant related facilities outside the perimeter fence. The contamination in Z-Plant is primarily /sup 239/Pu which has a half-life of 24,360 years. Because of the long half-life of /sup 239/Pu, it is not practical to consider the isolation of the facility to await reduction of the contamination level by natural decay. Therefore, this study analyzes the costs, risk and benefit of decontaminating Z-Plant to four different levels of residual contamination. The three principle criteria used in the analysis are cost, the risk of offsite dose to the public, and the occupational exposure to onsite personnel.

Actual and potential use of population viability analyses in recovery of plant species listed under the US endangered species act.

Science.gov (United States)

Zeigler, Sara L; Che-Castaldo, Judy P; Neel, Maile C

2013-12-01

Use of population viability analyses (PVAs) in endangered species recovery planning has been met with both support and criticism. Previous reviews promote use of PVA for setting scientifically based, measurable, and objective recovery criteria and recommend improvements to increase the framework's utility. However, others have questioned the value of PVA models for setting recovery criteria and assert that PVAs are more appropriate for understanding relative trade-offs between alternative management actions. We reviewed 258 final recovery plans for 642 plants listed under the U.S. Endangered Species Act to determine the number of plans that used or recommended PVA in recovery planning. We also reviewed 223 publications that describe plant PVAs to assess how these models were designed and whether those designs reflected previous recommendations for improvement of PVAs. Twenty-four percent of listed species had recovery plans that used or recommended PVA. In publications, the typical model was a matrix population model parameterized with ≤5 years of demographic data that did not consider stochasticity, genetics, density dependence, seed banks, vegetative reproduction, dormancy, threats, or management strategies. Population growth rates for different populations of the same species or for the same population at different points in time were often statistically different or varied by >10%. Therefore, PVAs parameterized with underlying vital rates that vary to this degree may not accurately predict recovery objectives across a species' entire distribution or over longer time scales. We assert that PVA, although an important tool as part of an adaptive-management program, can help to determine quantitative recovery criteria only if more long-term data sets that capture spatiotemporal variability in vital rates become available. Lacking this, there is a strong need for viable and comprehensive methods for determining quantitative, science-based recovery criteria for

Plant analyzer development for high-speed interactive simulation of BWR plant transients

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Mallen, A.N.

1986-01-01

Advanced modeling techniques have been combined with modern, special-purpose peripheral minicomputer technology to develop a plant analyzer which provides realistic and accurate predictions of plant transients and severe off-normal events in nuclear power plants through on-line simulations at speeds of approximately 10 times faster than actual process speeds. The new simulation technology serves not only for carrying out routinely and efficiently safety analyses, optimizations of emergency procedures and design changes, parametric studies for obtaining safety margins and for generic training but also for assisting plant operations. Five modeling principles are presented which serve to achieve high-speed simulation of neutron kinetics, thermal conduction, nonhomogeneous and nonequilibrium two-phase flow coolant dynamics, steam line acoustical effects, and the dynamics of the balance of plant and containment systems, control systems and plant protection systems. 21 refs

AAEC builds synroc demonstration plant

International Nuclear Information System (INIS)

O'Hagan, R.

1986-01-01

A demonstration plant to test the feasibility of an Australian-developed method of immobilising radioactive waste is being built at the Australian Atomic Energy Commission's Lucas Heights Research Laboratories. The plant will operate as if radioactive waste was actually being processed, but non-radioactive elements of a similar composition will be used. The process involves the simulated waste being mixed into a slurry with the main SYNROC ingredients and then converted to a powder. The powder is moved about the plant in bellows-type containers by robots

Balance-of-plant outage availability study. Phase I. Extension report. [PWR

Energy Technology Data Exchange (ETDEWEB)

Thomasson, F.R.

1978-09-01

After completion of the Phase 1 Refueling Outage Availability Study, Babcock and Wilcox and the U.S. Department of Energy entered into a supplemental agreement to perform a balance-of-plant maintenance, inspection, and test study with the cooperation of Duke Power Company and Arkansas Power and Light Company. The objectives were (1) to expand the Phase 1 data base, including balance-of-plant activities, to reduce outage time and increase plant availability and (2) to conduct an onsite review of plant maintenance, practices to complement the utility efforts in reducing outage time and increasing on-line operational time. Data were obtained from (1) observations during the 1977 refueling outage at Oconee 3, (2) review of maintenance practices during the Arkansas Nuclear One, Unit 1, operational cycle in 1977, and (3) selected observations of the 1978 refueling outage at ANO-1. Accumulated data were then reviewed and analyzed to produce a list of improvement recommendations for Oconee 3 and ANO-1 that can be generically applied to plants of similar design and construction.

76 FR 14101 - Meadwestvaco Corporation, Consumer and Office Products Division, Including On-Site Leased Workers...

Science.gov (United States)

2011-03-15

... undated planning and organizing products. The review shows that on August 21, 2008, a certification of..., Consumer and Office Products Division, Including On-Site Leased Workers From Pro-Tel People, Sidney, NY; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with...

78 FR 48468 - Delphi Corporation, Electronics and Safety Division, Including On-Site Leased Workers From...

Science.gov (United States)

2013-08-08

..., Electronics and Safety Division, Including On-Site Leased Workers From Securitas, Bartech, Flint Janitorial... Adjustment Assistance on May 20, 2013, applicable to workers of Delphi Corporation, Electronics and Safety... on- site at the Flint, Michigan location of Delphi Corporation, Electronics and Safety Division. The...

75 FR 62423 - Barnstead Thermolyne Corporation, a Subsidiary of Thermo Fisher Scientific, Including On-Site...

Science.gov (United States)

2010-10-08

... related to the production of scientific laboratory equipment. New information shows that workers leased... Corporation, a Subsidiary of Thermo Fisher Scientific, Including On-Site Leased Workers From Sedona Staffing... Scientific, including on- site leased workers from Sedona Staffing, Dubuque, Iowa. The notice was published...

78 FR 42804 - Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor...

Science.gov (United States)

2013-07-17

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,346] Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor of IBM Corporation) and Jones Lang... firm. The workers were engaged in production of refrigerators and trash compactors as well as...

76 FR 73683 - Whirlpool Corporation, Including On-Site Leased Workers From Career Solutions TEC Staffing...

Science.gov (United States)

2011-11-29

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,593] Whirlpool Corporation, Including On-Site Leased Workers From Career Solutions TEC Staffing, Andrews International, IBM Corporation... refrigerators and trash compactors. The notice was published in the Federal Register on October 25, 2010 (75 FR...

The interactive on-site inspection system: An information management system to support arms control inspections

Energy Technology Data Exchange (ETDEWEB)

DeLand, S.M.; Widney, T.W.; Horak, K.E.; Caudell, R.B.; Grose, E.M.

1996-12-01

The increasing use of on-site inspection (OSI) to meet the nation`s obligations with recently signed treaties requires the nation to manage a variety of inspection requirements. This document describes a prototype automated system to assist in the preparation and management of these inspections.

Caustic-Side Solvent Extraction: Prediction of Cesium Extraction from Actual Wastes and Actual Waste Simulants

International Nuclear Information System (INIS)

Delmau, L.H.; Haverlock, T.J.; Sloop, F.V. Jr.; Moyer, B.A.

2003-01-01

This report presents the work that followed the CSSX model development completed in FY2002. The developed cesium and potassium extraction model was based on extraction data obtained from simple aqueous media. It was tested to ensure the validity of the prediction for the cesium extraction from actual waste. Compositions of the actual tank waste were obtained from the Savannah River Site personnel and were used to prepare defined simulants and to predict cesium distribution ratios using the model. It was therefore possible to compare the cesium distribution ratios obtained from the actual waste, the simulant, and the predicted values. It was determined that the predicted values agree with the measured values for the simulants. Predicted values also agreed, with three exceptions, with measured values for the tank wastes. Discrepancies were attributed in part to the uncertainty in the cation/anion balance in the actual waste composition, but likely more so to the uncertainty in the potassium concentration in the waste, given the demonstrated large competing effect of this metal on cesium extraction. It was demonstrated that the upper limit for the potassium concentration in the feed ought to not exceed 0.05 M in order to maintain suitable cesium distribution ratios

Greenhouse gas emissions from on-site wastewater treatment systems

Science.gov (United States)

Somlai-Haase, Celia; Knappe, Jan; Gill, Laurence

2016-04-01

Nearly one third of the Irish population relies on decentralized domestic wastewater treatment systems which involve the discharge of effluent into the soil via a percolation area (drain field). In such systems, wastewater from single households is initially treated on-site either by a septic tank and an additional packaged secondary treatment unit, in which the influent organic matter is converted into carbon dioxide (CO2) and methane (CH4) by microbial mediated processes. The effluent from the tanks is released into the soil for further treatment in the unsaturated zone where additional CO2 and CH4 are emitted to the atmosphere as well as nitrous oxide (N2O) from the partial denitrification of nitrate. Hence, considering the large number of on-site systems in Ireland and internationally, these are potential significant sources of greenhouse gas (GHG) emissions, and yet have received almost no direct field measurement. Here we present the first attempt to quantify and qualify the production and emissions of GHGs from a septic tank system serving a single house in the County Westmeath, Ireland. We have sampled the water for dissolved CO2, CH4 and N2O and measured the gas flux from the water surface in the septic tank. We have also carried out long-term flux measurements of CO2 from the drain field, using an automated soil gas flux system (LI-8100A, Li-Cor®) covering a whole year semi-continuously. This has enabled the CO2 emissions from the unsaturated zone to be correlated against different meteorological parameters over an annual cycle. In addition, we have integrated an ultraportable GHG analyser (UGGA, Los Gatos Research Inc.) into the automated soil gas flux system to measure CH4 flux. Further, manual sampling has also provided a better understanding of N2O emissions from the septic tank system.

Enhancement of on-site emergency diesel generator reliability

International Nuclear Information System (INIS)

Boner, G.L.; Hanners, H.W.

1979-01-01

The University of Dayton Research Institute has concluded a program designed to provide NRC/DOR with technical assistance in evaluating the factors leading to improved reliability of on-site emergency diesel generator (DG) units. The program consisted of a comprehensive review of DG maintenance and operating experience and a comparative evaluation of the DG manufacturer's recommendations. This information, will enable the NRC to improve the basis on which it makes regulatory decisions. The primary goal of the program is to better identify the main problem areas which decrease the reliability of the DG units and make recommendations. The report has attained the program objectives by identifying and discussing the more significant problems and presenting the recommended corrective actions. The identified problems have been categorized into three groups as a function of their significance

Biosensors for plant pathogen detection.

Science.gov (United States)

Khater, Mohga; de la Escosura-Muñiz, Alfredo; Merkoçi, Arben

2017-07-15

Infectious plant diseases are caused by pathogenic microorganisms such as fungi, bacteria, viruses, viroids, phytoplasma and nematodes. Worldwide, plant pathogen infections are among main factors limiting crop productivity and increasing economic losses. Plant pathogen detection is important as first step to manage a plant disease in greenhouses, field conditions and at the country boarders. Current immunological techniques used to detect pathogens in plant include enzyme-linked immunosorbent assays (ELISA) and direct tissue blot immunoassays (DTBIA). DNA-based techniques such as polymerase chain reaction (PCR), real time PCR (RT-PCR) and dot blot hybridization have also been proposed for pathogen identification and detection. However these methodologies are time-consuming and require complex instruments, being not suitable for in-situ analysis. Consequently, there is strong interest for developing new biosensing systems for early detection of plant diseases with high sensitivity and specificity at the point-of-care. In this context, we revise here the recent advancement in the development of advantageous biosensing systems for plant pathogen detection based on both antibody and DNA receptors. The use of different nanomaterials such as nanochannels and metallic nanoparticles for the development of innovative and sensitive biosensing systems for the detection of pathogens (i.e. bacteria and viruses) at the point-of-care is also shown. Plastic and paper-based platforms have been used for this purpose, offering cheap and easy-to-use really integrated sensing systems for rapid on-site detection. Beside devices developed at research and development level a brief revision of commercially available kits is also included in this review. Copyright © 2016 Elsevier B.V. All rights reserved.

Nuclear power plant safety. The merits of separation

International Nuclear Information System (INIS)

Helander, L.I.; Tiren, L.I.

1977-01-01

The paper illustrates how the physical separation of safety-related structures, systems and components can improve the protection of a nuclear power plant against multiple failures that may be caused by events such as fire, pipe-whip, missiles, flooding, hurricanes, lightning etc. Criteria for redundancy and separation requirements affect nuclear plant design in many areas such as building layout, arrangements for fire protection and ventilation, separation of mechanical systems and components, in particular emergency cooling systems, separation of electric equipment and cables. The implementation of the ensuing design criteria for a BWR power plant is described. This design involves the separation of emergency cooling systems into four 50% capacity systems, which are independent and separated, including the distribution network for electric power from on-site standby diesel generators and the circuitry for the reactor protection system. The plant is subdivided into a number of fire zones, each with its own independent ventilation system. The fire zones are further subdivided into a multitude of fire cells such that redundant subsystems are housed in separate cells. These design precautions with regard to fire are complemented by extensive fire fighting systems. (author)

Economic competitiveness of fuel cell onsite integrated energy systems

Science.gov (United States)

Bollenbacher, G.

1983-01-01

The economic competitiveness of fuel cell onsite integrated energy systems (OS/IES) in residential and commercial buildings is examined. The analysis is carried out for three different buildings with each building assumed to be at three geographic locations spanning a range of climatic conditions. Numerous design options and operating strategies are evaluated and two economic criteria are used to measure economic performance. In general the results show that fuel cell OS/IES's are competitive in most regions of the country if the OS/IES is properly designed. The preferred design is grid connected, makes effective use of the fuel cell's thermal output, and has a fuel cell powerplant sized for the building's base electrical load.

Evaluation of gamma-spectrometry equipment for on-site inspection

International Nuclear Information System (INIS)

Burnett, J.L.; Milbrath, B.D.; Mueller, W.F.

2017-01-01

An On-site Inspection (OSI) is an important component of the verification regime of the Comprehensive Nuclear-Test-Ban Treaty (CTBT), with the objective of gathering evidence of a possible Treaty violation. This includes the use of gamma-spectrometry equipment to identify 17 particulate radionuclides that are indicative of a nuclear explosion. This research provides an evaluation of high- (germanium), medium- (cadmium zinc telluride) and low-resolution (sodium iodide and lanthanum bromide) detectors using modelled radionuclide signatures from a nuclear explosion and Monte Carlo simulations of a detector response. The complex radionuclide signatures are shown to only be distinguishable using a high-resolution system for 1 week and 1 year post-detonation cases. (author)

Development and outcomes of an online-onsite hybrid dental admissions enhancement pilot program.

Science.gov (United States)

Hanson, Carrie L; Van Ness, Chris; Gadbury-Amyot, Cynthia C; Crain, Geralyn

2014-10-01

The University of Missouri-Kansas City (UMKC) School of Dentistry has piloted two years of an Admissions Enhancement Program (AEP) with students from underrepresented minority groups and/or economically disadvantaged areas of Missouri interested in applying to dental school. The AEP utilizes an innovative online-onsite hybrid format to elevate students' foundational knowledge in biology, chemistry, organic chemistry, and quantitative reasoning. The online component includes interaction with UMKC instructors using tablet technology and Wimba virtual classroom sessions. The onsite component engages students in academic and professional development, enrichment activities targeting skills training, experience in dental labs and clinics, and mentoring in preparing the dental school application, essay writing, and interviewing. Results to date indicate overall program satisfaction among AEP participants and a dental school acceptance rate of 73.7 percent (14/19 students). Participants reported the mock interviews and essay-writing portions contributed to their becoming competitive candidates for the admission process, and the online material enhanced their preparation for the Dental Admission Test (DAT). Pre- and post-AEP data show participant DAT Academic Average scores increased by two points. The school will continue to monitor program participants in subsequent years.

78 FR 66779 - United States Enrichment Corporation, Paducah Gaseous Diffusion Plant, Including On-Site Leased...

Science.gov (United States)

2013-11-06

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,862] United States Enrichment..., applicable to workers of United States Enrichment Corporation, Paducah Gaseous Diffusion Plant, including on... were engaged in the production of low enrichment uranium. The company reports that workers leased from...

WE-G-BRA-05: IROC Houston On-Site Audits and Parameters That Affect Performance

International Nuclear Information System (INIS)

Kry, S; Dromgoole, L; Alvarez, P; Lowenstein, J; Molineu, A; Taylor, P; Followill, D

2015-01-01

Purpose: To highlight the IROC Houston on-site dosimetry audit program, and to investigate the impact of clinical conditions on the frequency of errors/recommendations noted by IROC Houston. Methods: The results of IROC Houston on-site audits from 2000-present were abstracted and compared to clinical parameters, this included 409 institutions and 1020 linacs. In particular, we investigated the frequency of recommendations versus year, and the impact of repeat visits on the number of recommendations. We also investigated the impact on the number of recommendations of several clinical parameters: the number and age of the linacs, the linac/TPS combination, and the scope of the QA program. Results: The number of recommendations per institution (3.1 average) has shown decline between 2000 and present, although the number of recommendations per machine (0.89) has not changed. Previous IROC Houston site visits did not Result in fewer recommendations on a repeat visit, but IROC Houston tests have changed substantially during the last 15 years as radiotherapy technology has changed. There was no impact on the number of recommendations based on the number of machines at the institution or the age of a given machine. The fewest recommendations were observed for Varian-Eclipse combinations (0.71 recs/machine), while Elekta- Pinnacle combinations yielded the most (1.62 recs/machine). Finally, in the TG-142 era (post-2010), those institutions that had a QA recommendation (n=77) had significantly more other recommendations (1.83 per institution) than those that had no QA rec (n=12, 1.33 per institution). Conclusion: Establishing and maintaining a successful radiotherapy program is challenging and areas of improvement can routinely be identified. Clinical conditions such as linac-TPS combinations and the establishment of a good QA program impact the frequency of errors/deficiencies identified by IROC Houston during their on-site review process

WE-G-BRA-05: IROC Houston On-Site Audits and Parameters That Affect Performance

Energy Technology Data Exchange (ETDEWEB)

Kry, S; Dromgoole, L; Alvarez, P; Lowenstein, J; Molineu, A; Taylor, P; Followill, D [UT MD Anderson Cancer Center, Houston, TX (United States)

2015-06-15

Purpose: To highlight the IROC Houston on-site dosimetry audit program, and to investigate the impact of clinical conditions on the frequency of errors/recommendations noted by IROC Houston. Methods: The results of IROC Houston on-site audits from 2000-present were abstracted and compared to clinical parameters, this included 409 institutions and 1020 linacs. In particular, we investigated the frequency of recommendations versus year, and the impact of repeat visits on the number of recommendations. We also investigated the impact on the number of recommendations of several clinical parameters: the number and age of the linacs, the linac/TPS combination, and the scope of the QA program. Results: The number of recommendations per institution (3.1 average) has shown decline between 2000 and present, although the number of recommendations per machine (0.89) has not changed. Previous IROC Houston site visits did not Result in fewer recommendations on a repeat visit, but IROC Houston tests have changed substantially during the last 15 years as radiotherapy technology has changed. There was no impact on the number of recommendations based on the number of machines at the institution or the age of a given machine. The fewest recommendations were observed for Varian-Eclipse combinations (0.71 recs/machine), while Elekta- Pinnacle combinations yielded the most (1.62 recs/machine). Finally, in the TG-142 era (post-2010), those institutions that had a QA recommendation (n=77) had significantly more other recommendations (1.83 per institution) than those that had no QA rec (n=12, 1.33 per institution). Conclusion: Establishing and maintaining a successful radiotherapy program is challenging and areas of improvement can routinely be identified. Clinical conditions such as linac-TPS combinations and the establishment of a good QA program impact the frequency of errors/deficiencies identified by IROC Houston during their on-site review process.

Noble Gas Sampling and Detection Methods for On-Site Inspections in Support of CTBT

International Nuclear Information System (INIS)

Wieslander, J.S.E.

2015-01-01

The On-Site Inspections (OSI) constitutes the final verification measure under the CTBT, and are conducted to verify States Parties' compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). An on-site inspection is launched to establish whether or not a nuclear explosion has been carried out and during such an inspection, facts might also be gathered to identify a possible violator of the Treaty. The Treaty lists all activities and techniques that are permitted and one of these is the environmental sampling of noble gases (NG) in the air and underground, which can be deployed at any time during an OSI. The CTBT relevant isotopes are Xe-133, 133m, 131m, 135 and Ar-37. The samples are primarily to be analyzed on-site, although the treaty also allows off-site analysis in designated laboratories if necessary. Stringent procedures ensure the security, integrity and confidentiality of the samples throughout the sampling and analysis process — all taking place in the field. Over the past decade the techniques for NG sampling, processing and analysis of both atmospheric and subsoil NG samples have been developed further in order to fit to the conditions and requirements during an OSI. This has been a major international effort with a global set of collaborators. Especially during the past three years the efforts intensified in order to finalize the scientific and technical developments for the Integrated Field Exercise, November 2014 (IFE14). This presentation will provide an overview of the current status of the OSI NG sampling regime and the OSI NG Field Laboratory to be deployed in IFE14, together with more technical descriptions of methods and equipment as well as a short discussion on potential future developments and alternative applications as applicable. (author)

Improvement of Hydraulic and Water Quality Renovation Functions by Intermittent Aeration of Soil Treatment Areas in Onsite Wastewater Treatment Systems

Directory of Open Access Journals (Sweden)

David V. Kalen

2010-12-01

Full Text Available We tested intermittent aeration of the soil treatment area (STA of onsite wastewater treatment systems (OWTS for its ability to restore and maintain STA hydraulic flow and improve the water quality functions of conventional OWTS. Evaluation was conducted on hydraulically-failed conventional OWTS at three state-owned medical group homes in Washington County, RI, USA. Testing was conducted in two phases, with Phase I (before intermittent soil aeration (ISA comprising the first 6 months of the study, and Phase II (during ISA the remaining 7 months. Intermittent soil aeration restored STA hydraulic function in all three systems despite a marked reduction in the STA total infiltrative surface. Soil pore water was collected from 30 and 90 cm below the STA during both phases and analyzed for standard wastewater parameters. Although the STA infiltrative surface was reduced—and the contaminant load per unit of area increased—after installation of the ISA system, no differences were observed between phases in concentration of total N, NO3, total P, or dissolved organic carbon (DOC. Apparent removal rates—which do not account for dilution or differences in infiltrative area—for total N, total P, and DOC remained the same or improved during Phase II relative to the pre-operation phase. Furthermore, intermittent soil aeration enhanced actual removal rates —which do account for dilution and differences in infiltrative area. The effects of ISA on actual removal of contaminants from STE increased with increasing hydraulic load—a counterintuitive phenomenon, but one that has been previously observed in laboratory studies. The results of our study suggest that intermittent soil aeration can restore and maintain hydraulic flow in the STA and enhance carbon and nutrient removal in conventional OWTS.

75 FR 76487 - Haldex Brake Corporation, Commercial Vehicle Systems, Including On-Site Leased Workers of...

Science.gov (United States)

2010-12-08

..., Commercial Vehicle Systems, Including On-Site Leased Workers of Johnston Integration Technologies, a... Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (``Act''), 19 U.S.C... system components. The company reports that workers leased from Johnston Integration Technologies, a...

77 FR 14832 - Plumchoice, Inc., Including On-Site Leased Workers From Balance Staffing, Insight Global Staffing...

Science.gov (United States)

2012-03-13

...., Including On-Site Leased Workers From Balance Staffing, Insight Global Staffing, and Technisource..., Insight Global Staffing, and Technisource, Scarborough, Maine. The workers are engaged in activities... leased workers from Balance Staffing, Insight Global Staffing, and Technisource, Scarborough, Maine, who...

On-Site Detection of Aflatoxin B1 in Grains by a Palm-Sized Surface Plasmon Resonance Sensor

Directory of Open Access Journals (Sweden)

Jeong Moon

2018-02-01

Full Text Available Aflatoxins (AFs are highly toxic compounds that can cause both acute and chronic toxicity in humans. Aflatoxin B1 (AFB1 is considered the most toxic of AFs. Therefore, the rapid and on-site detection of AFB1 is critical for food safety management. Here, we report the on-site detection of AFB1 in grains by a portable surface plasmon resonance (SPR sensor. For the detection of AFB1, the surface of an SPR Au chip was sequentially modified by cysteine-protein G, AFB1 antibody, and bovine serum albumin (BSA. Then, the sample solution and AFB1-BSA conjugate were flowed onto the Au chip in serial order. In the absence of AFB1, the SPR response greatly increased due to the binding of AFB1-BSA on the Au chip. In the presence of AFB1, the SPR response showed little change because the small AFB1 molecule binds on the Au chip instead of the large AFB1-BSA molecule. By using this portable SPR-based competitive immunoassay, the sensor showed low limits of detection (2.51 ppb and quantification (16.32 ppb. Furthermore, we successfully detected AFB1 in rice, peanut, and almond samples, which suggests that the proposed sensing method can potentially be applied to the on-site monitoring of mycotoxins in food.

Rapid on-site sensing aflatoxin B1 in food and feed via a chromatographic time-resolved fluoroimmunoassay.

Directory of Open Access Journals (Sweden)

Zhaowei Zhang

Full Text Available Aflatoxin B1 poses grave threats to food and feed safety due to its strong carcinogenesis and toxicity, thus requiring ultrasensitive rapid on-site determination. Herein, a portable immunosensor based on chromatographic time-resolved fluoroimmunoassay was developed for sensitive and on-site determination of aflatoxin B1 in food and feed samples. Chromatographic time-resolved fluoroimmunoassay offered a magnified positive signal and low signal-to-noise ratio in time-resolved mode due to the absence of noise interference caused by excitation light sources. Compared with the immunosensing performance in previous studies, this platform demonstrated a wider dynamic range of 0.2-60 μg/kg, lower limit of detection from 0.06 to 0.12 µg/kg, and considerable recovery from 80.5% to 116.7% for different food and feed sample matrices. It was found to be little cross-reactivity with other aflatoxins (B2, G1, G2, and M1. In the case of determination of aflatoxin B1 in peanuts, corn, soy sauce, vegetable oil, and mouse feed, excellent agreement was found when compared with aflatoxin B1 determination via the conversational high-performance liquid chromatography method. The chromatographic time-resolved fluoroimmunoassay affords a powerful alternative for rapid on-site determination of aflatoxin B1 and holds a promise for food safety in consideration of practical food safety and environmental monitoring.