WorldWideScience

Sample records for activities improving productivity

  1. Productivity improvement opportunities at Navy public works activities

    OpenAIRE

    Dieffenbach, Richard Jacob

    1992-01-01

    Approved for public release; distribution is unlimited This study identifies six principal opportunities for productivity improvement at Navy Public Works in-house maintenance activities: improving work assignment, increasing shop supervisor effectiveness, reducing long lunches and early quits (through understanding of work impediments as demotivational contributors), improving service order management, improving job quality and miscellaneous opportunities. Activity "productivity opportu...

  2. Performance improvement: an active life cycle product management

    Science.gov (United States)

    Cucchiella, Federica; Gastaldi, Massimo; Lenny Koh, S. C.

    2010-03-01

    The management of the supply chain has gained importance in many manufacturing firms. Operational flexibility can be considered a crucial weapon to increase competitiveness in a turbulent marketplace. It reflects the ability of a firm to properly and rapidly respond to a variable and dynamic environment. For the firm operating in a fashion sector, the management of the supply chain is even more complex because the product life cycle is shorter than that of the firm operating in a non-fashion sector. The increase of firm flexibility level can be reached through the application of the real option theory inside the firm network. In fact, real option may increase the project value by allowing managers to more efficiently direct the production. The real option application usually analysed in literature does not take into account that the demands of products are well-defined by the product life cycle. Working on a fashion sector, the life cycle pattern is even more relevant because of an expected demand that grows according to a constant rate that does not capture the demand dynamics of the underlying fashion goods. Thus, the primary research objective of this article is to develop a model useful for the management of investments in a supply chain operating in a fashion sector where the system complexity is increased by the low level of unpredictability and stability that is proper of the mood phenomenon. Moreover, unlike the traditional model, a real option framework is presented here that considers fashion product characterised by uncertain stages of the production cycle.

  3. Improved Production of Pharmacologically-active Sclerotiorin by ...

    African Journals Online (AJOL)

    Methods: A Brazilian strain of P. sclerotiorum was grown under different culture conditions in two liquid media (malt and a dextrose-peptone salt medium supplemented with sodium chloride) and in solid state fermentation in rice. Sclerotiorin production was monitored by high performance liquid chromatography (HPLC).

  4. Preliminary Study on Kano Model in the Conceptual Design Activities for Product Lifecycle Improvement

    Science.gov (United States)

    Fahrul Hassan, Mohd; Rahman, M. R. A.; Arifin, A. M. T.; Ismail, A. E.; Rasidi Ibrahim, M.; Zulafif Rahim, M.; Fauzi Ahmad, Md

    2017-08-01

    Product manufactured with short life cycle had only one major issue, it can lead to increasing volume of waste. Day by day, this untreated waste had consumed many landfill spaces, waiting for any possible alternatives. Lack of product recovery knowledge and recyclability features imprinted into product design are one of the main reason behind all this. Sustainable awareness aspect should not just be implied into people’s mind, but also onto product design. This paper presents a preliminary study on Kano model method in the conceptual design activities to improve product lifecycle. Kano model is a survey-type method, used to analyze and distinguished product qualities or features, also how the customers may have perceived them. Three important attributes of Kano model are performance, attractive and must-be. The proposed approach enables better understanding of customer requirements while providing a way for Kano model to be integrated into engineering design to improve product’s end-of-life. Further works will be continued to provide a better lifecycle option (increase percentage of reuse, remanufacture or recycle, whereby decrease percentage of waste) of a product using Kano model approach.

  5. Improvement of biomass production and glucoamylase activity by Candida famata using factorial design.

    Science.gov (United States)

    Mosbah, Habib; Aissa, Imen; Hassad, Nahla; Farh, Dhaker; Bakhrouf, Amina; Achour, Sami

    2016-07-01

    To improve biomass production and glucoamylase activity (GA) by Candida famata, culture conditions were optimized. A 2(3) full factorial design (FFD) with a response surface model was used to evaluate the effects and interactions of pH (X1 ), time of cultivation (X2 ), and starch concentration (X3 ) on the biomass production and enzyme activity. A total of 16 experiments were conducted toward the construction of an empiric model and a first-order equation. It was found that all factors (X1 , X2 , and X3 ) and their interactions were significant at a certain confidence level (P production and GA of C. famata. Under this optimized medium, the experimental biomass production and GA obtained were 1.8 ± 0.54 g/L and 0.078 ± 0.012 µmol/L/Min, about 1.5- and 1.8-fold, respectively, higher than those in basal medium. The (R(2) ) coefficients obtained were 0.997 and 0.990, indicating an adequate degree of reliability in the model. Approximately 99% of validity of the predicted value was achieved. © 2015 International Union of Biochemistry and Molecular Biology, Inc.

  6. Nanocrystals of medium soluble actives--novel concept for improved dermal delivery and production strategy.

    Science.gov (United States)

    Zhai, Xuezhen; Lademann, Jürgen; Keck, Cornelia M; Müller, Rainer H

    2014-08-15

    After use in oral pharmaceutical products, nanocrystals are meanwhile applied to improve the dermal penetration of cosmetic actives (e.g. rutin, hesperidin) and of drugs. By now, nanocrystals are only dermally applied made from poorly soluble actives. The novel concept is to formulate nanocrystals also from medium soluble actives, and to apply a dermal formulation containing additionally nanocrystals. The nanocrystals should act as fast dissolving depot, increase saturation solubility and especially accumulate in the hair follicles, to further increase skin penetration. Caffeine was used as model compound with relevance to market products, and a particular process was developed for the production of caffeine nanocrystals to overcome the supersaturation related effect of crystal growth and fiber formation - typical with medium soluble compounds. It is based on low energy milling (pearl milling) in combination with low dielectric constant dispersion media (water-ethanol or ethanol-propylene glycol mixtures) and optimal stabilizers. Most successful was Carbopol(®) 981 (e.g. 20% caffeine in ethanol-propylene glycol 3:7 with 2% Carbopol, w/w). Nanocrystals with varied sizes can now be produced in a controlled process e.g. 660 nm (optimal for hair follicle accumulation) to 250 nm (optimal for fast dissolution). The short term test proved stability over 2 months of the present formulation being sufficient to perform in vivo testing of the novel concept. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Improving Productivity via QWL Centers.

    Science.gov (United States)

    Bentley, Marion T.; Hansen, Gary B.

    1980-01-01

    Gives a brief history of productivity improvement legislation in the United States and of the development and demise of the National Center for Productivity and Quality of Working Life (QWL). Describes existing productivity and QWL centers, including their locations, scope, services, and activities, and urges greater support at the federal level.…

  8. Improvement of radioisotope production technology

    International Nuclear Information System (INIS)

    Li Yongjian

    1987-01-01

    The widespreading and deepgoing applications of radioisotopes results the increasing demands on both quality and quantity. This in turn stimulating the production technology to be improved unceasingly to meet the different requirements on availability, variety, facility, purity, specific activity and specificity. The major approaches of achieving these improvements including: optimizing mode of production; enhancing irradiation conditions; amelioration target arrangement; adapting nuclear process and inventing chemical processing. (author)

  9. LOGISTICAL APPROACHES TO IMPROVE THE MANAGEMENT OF PRODUCTION AND ECONOMIC ACTIVITIES OF BUSINESS ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    A. S. Senin

    2016-01-01

    Full Text Available This article sets out the key aspects of the management of enterprise structures on the basis of logistizatsii, which allowed to establish a close relationship between the main processes (production, and provide processes (procurement, sales, ie introduce the implementation of these processes as a whole. The purpose / goal. The purpose of the work is to study the nature and characteristics of the organizational-economic mechanism of production and economic activity of enterprise structures on the basis of the logistical approach, identifying the problems and prospects of further development.Methodology. In this article we used a set of general scientific and special methods of investigation. General scientific research methods (analysis and synthesis revealed a dynamic and structural specifics of the development of the global logistics market, to determine the future direction of development. Special investigation techniques (forecasting and modeling have allowed to develop a set of recommendations aimed at increasing the level of innovation activity of logistic operators in line with global trends and immutable proposed changes in consumer demand in key market segments.Results. As part of the presentation of the present article the author has examined the nature, objectives and business structures control stages with the use of modern logistics approach.

  10. How can we use a mathematical model in order to analyze and improve the efficiency of a productive activity?

    Directory of Open Access Journals (Sweden)

    Mariana Nikolla

    2017-07-01

    Full Text Available Beer business industry is one of the most profitable agro-processing industries in the country. It has increased by expanding local and international market. There are 80 small and large beer factories that have their activity in Albania. The leading domestic beer manufacturers are: "Stela" beer, “Tirana” beer, “Korca” beer, “Kaon” beer, “Norga” beer, etc. They have invested millions of euros in terms of improving the quality of their production. Stela beer was the fi rst private beer active in the Albanian market. Its factory production founders of Stela beer responded to the market by investing in the development of technology, modern equipment and science. Stela beer processing and production systems have been improved continuously. The investments today are at around 20 million dollars. The factory has a considerable number of employees and a production capacity of around 250,000 hl per year. This article uses information obtained for beer production during the period 2003-2016. Through nonparametric mathematical model Dea, the impact of production factors such as investment, advertising, expenses, capital and number of employees in the production of beer during the study period is analyzed. The analysis showed that the best years or more efficient years in the use of the quantity of inputs for the period 2003-2016 are 2007, 2014 and 2015. The years 2003, 2010 and 2012 are less efficient by Dea analysis. The study also showed the best possible combinations of inputs improving the efficiency of inefficient years in the Stela Beer production.

  11. Productivity Improvement for Engineers.

    Science.gov (United States)

    1981-08-01

    organization and the likely positions or types of work that will be required of the engineer in the future. There should therefore, be a balance of...Mall, P., Improving Total Productivity, John Wiley & Sons, New York, 1978. Miller, R.B., Participative Management-Quality of Worklife and Job Enrichment...Noyes Data Corp., Park Ridge, N.J., 1977. Hughes Aircraft Co., R & D Productivity-Study Report, Hughes Aircraft Co., Culver City , California, 1974

  12. CDBG Public Improvements Activity

    Data.gov (United States)

    Department of Housing and Urban Development — CDBG activity related to public improvements, including senior centers, youth centers, parks, street improvements, water/sewer improvements, child care centers, fire...

  13. Improving efficiency of transport fuels production by thermal hydrolysis of waste activated sludge

    Science.gov (United States)

    Gulshin, Igor

    2017-10-01

    The article deals with issues of transport biofuels. Transport biofuels are an important element of a system of energy security. Moreover, as part of a system it is inextricably linked to the urban, rural or industrial infrastructure. The paper discusses methods of increasing the yield of biogas from anaerobic digesters at wastewater treatment plants. The thermal hydrolysis method was considered. The main advantages and drawbacks of this method were analyzed. The experimental biomass (from SNDOD-bioreactor) and high-organic substrate have been previously studied by respirometry methods. A biomethane potential of the investigated organic substrate has high rates because of substrate composition (the readily biodegradable substrate in the total composition takes about 85%). Waste activated sludge from SNDOD-bioreactor can be used for biofuel producing with high efficiency especially with pre-treatment like a thermal hydrolysis. Further studies have to consider the possibility of withdrawing inhibitors from waste activated sludge.

  14. ELECTRICITY-FREE PRODUCTION OF ACTIVATED CARBON FROM BIOMASS IN BORNEO TO IMPROVE WATER QUALITY

    Directory of Open Access Journals (Sweden)

    Yasutaka Sasaki,

    2011-11-01

    Full Text Available Activated carbons (ACs were prepared from biomass of Borneo island (wood charcoal, peat, and coconut husk by using an electricity–free furnace, of which the energy source was exclusively wood charcoal. This furnace was comprised of two parts, an inner vessel equipped with water inlet for steam activation and an outer shell as a heating part for the inner vessel. The inside temperature of the inner vessel was able to reach over 1000 oC. Peat and wood charcoal were converted to AC by carbonization followed by steam activation, and the specific BET surface areas of resultant ACs were 889 m2/g and 749 m2/g, respectively. A mobile apparatus for water purification was newly designed and fabricated with the resultant AC, together with a white quartz sand, which is called keranggas in Kalimantan. The CODOH of both polluted creek water by the University of Palangka Raya and Kahayan River water were remarkably decreased by the purification with the designed apparatus from 20.0 mgO/L to 0.93 mgO/L, and 18.2 mgO/L to 0.74 mgO/L, respectively. Thus, the newly designed furnace and purification apparatus were shown to be highly effective tools to produce a promising agent for water purification and to produce clarified water without use of electricity, respectively.

  15. Improved wound care product

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention pertains to use of sodium diacetate (NaHAc 2) as an antimicrobial agent against bacteria growing in biofilms. The aspects of the invention include a wound care product comprising sodium diacetate, a kit comprising a wound care product,and a methodof treating an infected wound....

  16. Improving pension product design

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    2013-01-01

    The paper develops a pension product that can be oered in a dened contribution pension scheme as a deferred or immediate life annuity. The product is characterized by linking an individual's savings directly to market returns and differs from the products available in the market by being adjusted...... to individual needs. We argue that the asset allocation, the payout prole and the insured sum should not only depend on the plan member's age (or time left to retirement), nor only on her risk preferences, but should capture personal and economical characteristics. Among other factors, we include current wealth...... are optimal under the expected utility function of retirement benets given the individual's characteristics. The problem is solved via a model that combines two optimization approaches: stochastic optimal control and multistage stochastic programming. The rst method is common in nancial and actuarial...

  17. Stabilization of enzymes activities of lipoxygenase pathway by irradiation to improve the production of olive oil aroma

    International Nuclear Information System (INIS)

    Musrati, Imen

    2009-01-01

    The main purpose of this work was to improve the synthesis of volatile compounds leading to green note in olives and olive tree leaves by improving enzymes activities of lipoxygenase pathway. Lipoxygenase (LOX), hydroperoxyde lyase (HPL) and alcohol dehydrogenase (ADH) activities were tested in olives and olive tree leaves during maturation. The gamma irradiation effects on these samples were studied. LOX, HPL and ADH showed maximum activities at black stage for olives and in December for olive leaves. Those activities, from olives and Chemlali olive leaves, were improved after irradiation with 0,5KGy. For the case of Chetoui olive leaves, the irradiation treatment was unfavorable because it causes a loss in enzymes activities. (Author)

  18. Improving employee productivity through improved health.

    Science.gov (United States)

    Mitchell, Rebecca J; Ozminkowski, Ronald J; Serxner, Seth

    2013-10-01

    The objective of this study was to estimate productivity-related savings associated with employee participation in health promotion programs. Propensity score weighting and multiple regression techniques were used to estimate savings. These techniques were adjusted for demographic and health status differences between participants who engaged in one or more telephonic health management programs and nonparticipants who were eligible for but did not engage in these programs. Employees who participated in a program and successfully improved their health care or lifestyle showed significant improvements in lost work time. These employees saved an average of $353 per person per year. This reflects about 10.3 hours in additional productive time annually, compared with similar, but nonparticipating employees. Participating in health promotion programs can help improve productivity levels among employees and save money for their employers.

  19. How does free ammonia-based sludge pretreatment improve methane production from anaerobic digestion of waste activated sludge.

    Science.gov (United States)

    Wang, Dongbo; Liu, Bowen; Liu, Xuran; Xu, Qiuxiang; Yang, Qi; Liu, Yiwen; Zeng, Guangming; Li, Xiaoming; Ni, Bing-Jie

    2018-09-01

    Previous studies reported that free ammonia (FA) pretreatment could improve methane production from anaerobic digestion of waste activated sludge (WAS) effectively. However, details of how FA pretreatment improves methane production are poorly understood. This study therefore aims to reveal the underlying mechanisms of FA pretreatment affecting anaerobic digestion of WAS through a series of batch tests using either real sludge or synthetic media as the digestion substrates at different pH values. At pH 8.5 level, with an increase of FA level from 18.5 to 92.5 mg/L (i.e., NH+ 4-N: 100-500 mg/L; pH 8.5) the maximum methane yield varied between 194.0 ± 3.9 and 196.9 ± 7.7 mL/g of VSS (25 °C, 1 atm). At pH 9.5 or 10 level, however, with an increase of initial FA level from 103.2 to 516.2 mg/L, the maximal methane yield increased linearly. The mechanism studies revealed that FA pretreatment at high levels not only accelerated the disintegration of WAS but also enhanced the biodegradability of WAS. Although pH in the digesters was adjusted to 7.0 ± 0.1, the high levels of NH+ 4-N added or released led to substantial levels of residual FA ranging from 4.4 to 11.6 mg/L. It was found that this level of FA inhibited homoacetogenesis and methanogenesis significantly, though hydrolysis, acidogenesis, and acetogenesis processes were unaffected largely. Further analyses showed that the inhibition constant of FA to substrate degradation was in the sequence of dextran > glucose > hydrogen > acetate, indicating the methanogenesis process was more sensitive to FA. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Sears Home Improvement Products, Inc. Information Sheet

    Science.gov (United States)

    Sears Home Improvement Products, Inc. (the Company) is located in Longwood, Florida. The case involves renovation activities conducted at property constructed prior to 1978, located in cities across Minnesota, Wisconsin, California, Georgia, Nevada.

  1. Improvement of erythrose reductase activity, deletion of by-products and statistical media optimization for enhanced erythritol production from Yarrowia lipolytica mutant 49.

    Science.gov (United States)

    Ghezelbash, Gholam Reza; Nahvi, Iraj; Emamzadeh, Rahman

    2014-08-01

    The purpose of the present investigation was to produce erythritol by Yarrowia lipolytica mutant without any by-products. Mutants of Y. lipolytica were generated by ultra-violet for enhancing erythrose reductase (ER) activity and erythritol production. The mutants showing the highest ER activity were screened by triphenyl tetrazolium chloride agar plate assay. Productivity of samples was analyzed by thin-layer chromatography and high-performance liquid chromatography equipped with the refractive index detector. One of the mutants named as mutant 49 gave maximum erythritol production without any other by-products (particularly glycerol). Erythritol production and specific ER activity in mutant 49 increased to 1.65 and 1.47 times, respectively, in comparison with wild-type strain. The ER gene of wild and mutant strains was sequenced and analyzed. A general comparison of wild and mutant gene sequences showed the replacement of Asp(270) with Glu(270) in ER protein. In order to enhance erythritol production, we used a three component-three level-one response Box-Behnken of response surface methodology model. The optimum medium composition for erythritol production was found to be (g/l) glucose 279.49, ammonium sulfate 9.28, and pH 5.41 with 39.76 erythritol production.

  2. Quality Improvement and Learning in Productive Systems

    OpenAIRE

    Charles H. Fine

    1986-01-01

    Recent interest in product quality suggests that effort devoted to improving the quality of manufactured products may reduce unit costs. This conjecture---that improving quality can lower costs---challenges the traditional assumption that unit costs increase with increased quality assurance activities and has significant implications for quality management. By introducing the idea of a quality-based learning curve, this paper links the previously disjoint literatures of quality control and le...

  3. Improved production of poly-γ-glutamic acid by Bacillus subtilis D7 isolated from Doenjang, a Korean traditional fermented food, and its antioxidant activity.

    Science.gov (United States)

    Lee, Na-Ri; Lee, Sang-Mee; Cho, Kwang-Sik; Jeong, Seong-Yun; Hwang, Dae-Youn; Kim, Dong-Seob; Hong, Chang-Oh; Son, Hong-Joo

    2014-06-01

    The objectives of this study was to improve poly-γ-glutamic acid (γ-PGA) production by Bacillus subtilis D7 isolated from a Korean traditional fermented food and to assess its antioxidant activity for applications in the cosmetics and pharmaceutical industries. Strain D7 produced γ-PGA in the absence of L-glutamic acid, indicating L-glutamic acid-independent production. However, the addition of L-glutamic acid increased γ-PGA production. Several tricarboxylic acid cycle intermediates and amino acids could serve as the metabolic precursors for γ-PGA production, and the addition of pyruvic acid and D-glutamic acid to culture medium improved the yield of γ-PGA markedly. The maximum yield of γ-PGA obtained was 24.93 ± 0.64 g/l in improved medium, which was about 5.4-fold higher than the yield obtained in basal medium. γ-PGA was found to have 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity (46.8 ± 1.5 %), hydroxyl radical scavenging activity (52.0 ± 1.8 %), 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonate (ABTS) radical scavenging activity (42.1 ± 1.8 %), nitric oxide scavenging activity (35.1 ± 1.3 %), reducing power (0.304 ± 0.008), and metal chelating activity (91.3 ± 3.5 %). These results indicate that γ-PGA has a potential use in the food, cosmetics, and biomedical industries for the development of novel products with radical scavenging activity. As far as we are aware, this is the first report to describe the antioxidant activityof γ-PGA produced by bacteria.

  4. Improving designer productivity. [artificial intelligence

    Science.gov (United States)

    Hill, Gary C.

    1992-01-01

    Designer and design team productivity improves with skill, experience, and the tools available. The design process involves numerous trials and errors, analyses, refinements, and addition of details. Computerized tools have greatly speeded the analysis, and now new theories and methods, emerging under the label Artificial Intelligence (AI), are being used to automate skill and experience. These tools improve designer productivity by capturing experience, emulating recognized skillful designers, and making the essence of complex programs easier to grasp. This paper outlines the aircraft design process in today's technology and business climate, presenting some of the challenges ahead and some of the promising AI methods for meeting these challenges.

  5. Pyridoxine Supplementation Improves the Activity of Recombinant Glutamate Decarboxylase and the Enzymatic Production of Gama-Aminobutyric Acid.

    Directory of Open Access Journals (Sweden)

    Yan Huang

    Full Text Available Glutamate decarboxylase (GAD catalyzes the irreversible decarboxylation of L-glutamate to the valuable food supplement γ-aminobutyric acid (GABA. In this study, GAD from Escherichia coli K12, a pyridoxal phosphate (PLP-dependent enzyme, was overexpressed in E. coli. The GAD produced in media supplemented with 0.05 mM soluble vitamin B6 analog pyridoxine hydrochloride (GAD-V activity was 154.8 U mL-1, 1.8-fold higher than that of GAD obtained without supplementation (GAD-C. Purified GAD-V exhibited increased activity (193.4 U mg-1, 1.5-fold higher than that of GAD-C, superior thermostability (2.8-fold greater than that of GAD-C, and higher kcat/Km (1.6-fold higher than that of GAD-C. Under optimal conditions in reactions mixtures lacking added PLP, crude GAD-V converted 500 g L-1 monosodium glutamate (MSG to GABA with a yield of 100%, and 750 g L-1 MSG with a yield of 88.7%. These results establish the utility of pyridoxine supplementation and lay the foundation for large-scale enzymatic production of GABA.

  6. Nd-doped Bi2O3 nanocomposites: simple synthesis and improved photocatalytic activity for hydrogen production under visible light

    Science.gov (United States)

    Al-Namshah, Khadijah S.; Mohamed, Reda M.

    2018-04-01

    Bi2O3 has 2.4 eV band gap energy, which means it absorb in visible region. Though the photocatalytic activity of Bi2O3 is extremely little due to rapid rate of photogenerated electron-hole recombination. To face the economical and practical needs, the photocatalytic efficiency of Bi2O3 should be upgraded. In this paper, this was achieved by addition of neodymium to Bi2O3 nanosheets and Nd/Bi2O3 nanocomposites were prepared by a easy process at room temperature using a surfactant of Pluronic F127. The Bi2O3 nanosheets and Nd/Bi2O3 nanocomposites were investigated by many tools. The photocatalytic activity of Nd/Bi2O3 samples is better than Bi2O3 due to reduced band gap and reduced electron-hole recombination of Bi2O3 with addition of neodymium. In addition, Nd/Bi2O3 nanocomposites exhibit photocatalytic stability for hydrogen production which enables it to be reused on other occasions also.

  7. Disease activity decrease is associated with improvement in work productivity over 1 year in early axial spondyloarthritis (SPondyloArthritis Caught Early cohort).

    Science.gov (United States)

    van Lunteren, Miranda; Ez-Zaitouni, Zineb; Fongen, Camilla; Landewé, Robert; Ramonda, Roberta; van der Heijde, Désirée; van Gaalen, Floris A

    2017-12-01

    To assess if a change in disease activity is associated with a change in work productivity loss (WPL) over 1 year in early axial SpA (axSpA) patients. Baseline and 1 year data of axSpA patients in the SPondyloArthritis Caught Early cohort were analysed. Linear regression models were built explaining the change in the Ankylosing Spondylitis Disease Activity Score (ASDAS) over time by the change in absenteeism, presenteeism, WPL and activity impairment over time. Effect modification and confounding were tested for age, gender, arm of Assessment of SpondyloArthritis international Society classification criteria, HLA-B27, duration of chronic back pain, profession and medication. At baseline, in 105 axSpA patients (48% female, mean age 30.8 years, mean symptom duration 13.6 months, 92% HLA-B27 positive, 24% radiographic sacroiliitis), the mean ASDAS was 2.4 (s.d. 1.0), absenteeism 9% (s.d. 23), presenteeism 33% (s.d. 28), WPL 36% (s.d. 30) and activity impairment 37% (s.d. 25). After 1 year, the mean ASDAS decreased to 2.0 (s.d. 0.8) and absenteeism, presenteeism, WPL and activity impairment improved to 6% (s.d. 22), 26% (s.d. 26), 27% (s.d. 29) and 27% (s.d. 26), respectively. Models showed that if ASDAS decreased 1 unit, absenteeism, presenteeism, WPL and activity impairment improved by 5, 17, 16 and 18%, respectively. The impact of disease activity on work productivity was higher in patients with shorter symptom duration and the impact on absenteeism was higher in patients starting pharmacological treatment. In early axSpA patients, work productivity and daily activities are seriously impacted at baseline and 1 year. However, decreasing disease activity is associated with marked improvements in work productivity and daily activities. © The Author 2017. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  8. Improved production of short-chain fatty acids from waste activated sludge driven by carbohydrate addition in continuous-flow reactors: Influence of SRT and temperature

    International Nuclear Information System (INIS)

    Luo, Jingyang; Feng, Leiyu; Zhang, Wei; Li, Xiang; Chen, Hong; Wang, Dongbo; Chen, Yinguang

    2014-01-01

    Highlights: • SRT or temperature increase benefited the hydrolysis of fermentation substrates. • SCFAs, especially propionic acid, accumulated most at SRT 8 d and 37 °C. • The activities of key enzymes were in accordance with SCFAs production. • The ratio of Bacteria to Archaea was improved at SRT 8 d and 37 °C. - Abstract: During anaerobic fermentation of waste activated sludge (WAS), the production of short-chain fatty acids (SCFAs), especially propionic acid which is considered as the most preferred carbon source for enhanced biological phosphorus removal, can be improved by controlling the suitable mass ratio of carbon to nitrogen (C/N) and pH in batch mode. In this study the influences of solids retention time (SRT) and temperature on WAS hydrolysis and acidification in the continuous-flow systems in which the C/N ratio of WAS was modified by carbohydrate addition were investigated. Experimental results showed that the increase of SRT and temperature in a pertinent range benefited the hydrolysis of fermentation substrates and the accumulation of SCFAs, and SRT 8 d and temperature 37 °C were the most preferred conditions for the production of SCFAs, especially propionic acid. As there were more consumption of protein and carbohydrate and less production of methane at SRT 8 d and temperature 37 °C, more SCFAs were accumulated. Also, both the activities of key hydrolases and acid-forming enzymes and the ratio of acidogenic bacteria to methanogens showed good agreements with SCFAs production

  9. Productivity improvements in gas distribution

    International Nuclear Information System (INIS)

    Young, M.R.

    1997-01-01

    In 1993, the Hilmer Report resulted in the introduction of the National Competition Policy which, in the case of the gas industry, aims to promote gas-on-gas competition where to date it has been excluded. In response, and to prepare for wide gas industry reform, Gas and Fuel formed three fundamentally different core businesses on 1 July 1996 - Energy Retail, Network, and Contestable Services. In one productivity improvement initiative which is believed to be unique, Gas and Fuel appointed three companies as strategic alliance partners for distribution system maintenance. Gas and Fuel can now concentrate on its core role as asset manager which owns and operates the distribution system while procuring all services from what will become non-regulated businesses. This Paper details this initiative and the benefits which have resulted from overall changes and improvements, and outlines the challenges facing Gas and Fuel in the future. (au)

  10. Traditional Chinese Nootropic Medicine Radix Polygalae and Its Active Constituent Onjisaponin B Reduce β-Amyloid Production and Improve Cognitive Impairments.

    Science.gov (United States)

    Li, Xiaohang; Cui, Jin; Yu, Yang; Li, Wei; Hou, Yujun; Wang, Xin; Qin, Dapeng; Zhao, Cun; Yao, Xinsheng; Zhao, Jian; Pei, Gang

    2016-01-01

    Decline of cognitive function is the hallmark of Alzheimer's disease (AD), regardless of the pathological mechanism. Traditional Chinese medicine has been used to combat cognitive impairments and has been shown to improve learning and memory. Radix Polygalae (RAPO) is a typical and widely used herbal medicine. In this study, we aimed to follow the β-amyloid (Aβ) reduction activity to identify active constituent(s) of RAPO. We found that Onjisaponin B of RAPO functioned as RAPO to suppress Aβ production without direct inhibition of β-site amyloid precursor protein cleaving enzyme 1 (BACE1) and γ-secretase activities. Our mechanistic study showed that Onjisaponin B promoted the degradation of amyloid precursor protein (APP). Further, oral administration of Onjisaponin B ameliorated Aβ pathology and behavioral defects in APP/PS1 mice. Taken together, our results indicate that Onjisaponin B is effective against AD, providing a new therapeutic agent for further drug discovery.

  11. Balanced activation of IspG and IspH to eliminate MEP intermediate accumulation and improve isoprenoids production in Escherichia coli.

    Science.gov (United States)

    Li, Qingyan; Fan, Feiyu; Gao, Xiang; Yang, Chen; Bi, Changhao; Tang, Jinlei; Liu, Tao; Zhang, Xueli

    2017-11-01

    The MEP pathway genes were modulated to investigate whether there were new rate-limiting steps and toxic intermediates in this pathway. Activating IspG led to significant decrease of cell growth and β-carotene production. It was found that ispG overexpression led to accumulation of intermediate HMBPP, which seriously interfered with synthesis machinery of nucleotide and protein in Escherichia coli. Activation of the downstream enzyme IspH could solve HMBPP accumulation problem and eliminate the negative effects of ispG overexpression. In addition, intermediate MECPP accumulated in the starting strain, while balanced activation of IspG and IspH could push the carbon flux away from MECPP and led to 73% and 77% increase of β-carotene and lycopene titer respectively. Our work for the first time identified HMBPP to be a cytotoxic intermediate in MEP pathway and demonstrated that balanced activation of IspG and IspH could eliminate accumulation of HMBPP and MECPP and improve isoprenoids production. Copyright © 2017 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  12. Expression of Aspergillus hemoglobin domain activities in Aspergillus oryzae grown on solid substrates improves growth rate and enzyme production

    NARCIS (Netherlands)

    Biesebeke, te R.; Boussier, A.; Biezen van, N.; Braaksma, M.; Hondel, van den C.A.M.J.J.; Vos, de W.M.; Punt, P.J.

    2006-01-01

    DNA fragments coding for hemoglobin domains (HBD) were isolated from Aspergillus oryzae and Aspergillus niger. The HBD activities were expressed in A. oryzae by introduction of HBD gene fragments under the control of the promoter of the constitutively expressed gpdA gene. In the transformants,

  13. Renovated Parks Improve Physical Activity

    Centers for Disease Control (CDC) Podcasts

    We know that children who are physically active every day are less likely to develop chronic diseases as adults, including obesity. Dr. Sandy Slater, a researcher with the University of Illinois, Chicago Prevention Research Center, discusses how a park improvement project in Chicago helped engage communities to improve areas for play and activity.

  14. Preliminary Study and Improve the Production of Metabolites with Antifungal Activity by A Bacillus Sp Strain IBA 33

    Directory of Open Access Journals (Sweden)

    María Antonieta Gordillo

    2009-01-01

    Full Text Available Bacillus sp strain IBA 33 metabolites, isolated from decaying lemon fruits, were evaluated for the control of pathogenic and non-pathogenic fungi (Penicillium digitatum, Geotrichum candidum, Penicillium expansum, Aspergillus clavatus, Aspergillus flavus, Aspergillus niger, and Fusarium moniliforme. These metabolites were recovered from Landy medium (LM without aminoacids. In order to optimize metabolites production the LM was modified by adding different concentrations and sources of amino acids and carbohydrates at different culture conditions.Bacillus sp strain IBA 33 metabolites efficacy to control fungi were evaluated with in vitro and in vivo assays. A. flavus growth inhibition was 52% with the metabolites of Bacillus sp strain IBA 33 recovered from LM (MBLM in vitro assays. MBLM supplemented with 0.5% glutamic acid, inhibited the growth of P. digitatum, G. candidum, A. clavatus, A. niger and F. moniliforme by 65%, 88.44%, 84%, 34% and 92% respectively. The highest inhibition of P. expansum was 45% with MBLM supplemented with 0.5% aspartic acid. Similar results were obtained in vivo assays. These results showed that Bacillus sp strain IBA 33 metabolites specificity against fungi depended on the composition of the LM.

  15. Preliminary Study and Improve the Production of Metabolites with Antifungal Activity by A Bacillus Sp Strain IBA 33

    Directory of Open Access Journals (Sweden)

    María Antonieta Gordillo

    2009-04-01

    Full Text Available Bacillus sp strain IBA 33 metabolites, isolated from decaying lemon fruits, were evaluated for the control of pathogenic and non-pathogenic fungi (Penicillium digitatum, Geotrichum candidum, Penicillium expansum, Aspergillus clavatus, Aspergillus flavus, Aspergillus niger, and Fusarium moniliforme. These metabolites were recovered from Landy medium (LM without aminoacids. In order to optimize metabolites production the LM was modified by adding different concentrations and sources of amino acids and carbohydrates at different culture conditions. Bacillus sp strain IBA 33 metabolites efficacy to control fungi were evaluated with in vitro and in vivo assays. A. flavus growth inhibition was 52% with the metabolites of Bacillus sp strain IBA 33 recovered from LM (MBLM in vitro assays. MBLM supplemented with 0.5% glutamic acid, inhibited the growth of P. digitatum, G. candidum, A. clavatus, A. niger and F. moniliforme by 65%, 88.44%, 84%, 34% and 92% respectively. The highest inhibition of P. expansum was 45% with MBLM supplemented with 0.5% aspartic acid. Similar results were obtained in vivo assays. These results showed that Bacillus sp strain IBA 33 metabolites specificity against fungi depended on the composition of the LM.

  16. Natural Products based P-glycoprotein Activators for Improved β-amyloid Clearance in Alzheimer's Disease: An in silico Approach.

    Science.gov (United States)

    Shinde, Pravin; Vidyasagar, Nikhil; Dhulap, Sivakami; Dhulap, Abhijeet; Hirwani, Raj

    2015-01-01

    Alzheimer's disease is an age related disorder and is defined to be progressive, irreversible neurodegenerative disease. The potential targets which are associated with the Alzheimer's disease are cholinesterases, N-methyl-D-aspartate receptor, Beta secretase 1, Pregnane X receptor (PXR) and P-glycoprotein (Pgp). P-glycoprotein is a member of the ATP binding cassette (ABC) transporter family, which is an important integral of the blood-brain, blood-cerebrospinal fluid and the blood-testis barrier. Reports from the literature provide evidences that the up-regulation of the efflux pump is liable for a decrease in β -amyloid intracellular accumulation and is an important hallmark in Alzheimer's disease (AD). Thus, targeting β-amyloid clearance by stimulating Pgp could be a useful strategy to prevent Alzheimer's advancement. Currently available drugs provide limited effectiveness and do not assure to cure Alzheimer's disease completely. On the other hand, the current research is now directed towards the development of synthetic or natural based therapeutics which can delay the onset or progression of Alzheimer's disease. Since ancient time medicinal plants such as Withania somnifera, Bacopa monieri, Nerium indicum have been used to prevent neurological disorders including Alzheimer's disease. Till today around 125 Indian medicinal plants have been screened on the basis of ethnopharmacology for their activity against neurological disorders. In this paper, we report bioactives from natural sources which show binding affinity towards the Pgp receptor using ligand based pharmacophore development, virtual screening, molecular docking and molecular dynamics simulation studies for the bioactives possessing acceptable ADME properties. These bioactives can thus be useful to treat Alzheimer's disease.

  17. Improving biogas production from continuous co-digestion of oily wastewater and waste-activated sludge by hydrodynamic cavitation pre-treatment.

    Science.gov (United States)

    Habashi, Nima; Alighardashi, Abolghasem; Mennerich, Artur; Mehrdadi, Nasser; Torabian, Ali

    2018-04-01

    Hydrodynamic cavitation (HC) was evaluated as a pretreatment for synthetic oily wastewater (OWW) to be co-digested with waste-activated sludge (WAS). The main objective of the present research was the enhancement of biogas production by the application of HC pretreatment. HC was applied to the OWW, and the OWW and WAS were added to a 50 L continuous digestion reactor. As a control system, an identical digestion reactor was set up for co-digestion of the WAS and the OWW without pretreatment. The reactors were initially filled with inoculum and the hydraulic retention time (HRT) was set to 22 d. The HRT was gradually reduced to 19, 16, and finally 13 d, but the substrate quality was kept constant. The loading rate, accordingly, increased from 0.86 to 1.46 g TVS/(L d). The biogas volume was recorded online and its quality was analyzed regularly. The HC improved biogas production up to 43% at 22 d of HRT. Reducing the HRT decreased biogas production from the main reactor while that of the control reactor was more or less constant. HC also increased the biogas methane content; the methane concentration of the main reactor was about 3% higher than the methane concentration of the control reactor. The main reactor experienced no clogging or accumulation of fatty materials.

  18. Planned activities to improve safety

    International Nuclear Information System (INIS)

    1998-01-01

    This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 6 of the document contains some details about the planed activities to safety improvements

  19. Technological measures to improve automotive product quality

    OpenAIRE

    Gladkov, V.; Kruglov, S.

    2010-01-01

    The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

  20. Improvement of product design process by knowledge value analysis

    OpenAIRE

    XU, Yang; BERNARD, Alain; PERRY, Nicolas; LAROCHE, Florent

    2013-01-01

    Nowadays, design activities remain the core issue for global product development. As knowledge is more and more integrated, effective analysis of knowledge value becomes very useful for the improvement of product design processes. This paper aims at proposing a framework of knowledge value analysis in the context of product design process. By theoretical analysis and case study, the paper illustrates how knowledge value can be calculated and how the results can help the improvement of product...

  1. Reduction in erythrocyte-bound complement activation products and titres of anti-C1q antibodies associate with clinical improvement in systemic lupus erythematosus.

    Science.gov (United States)

    Buyon, Jill; Furie, Richard; Putterman, Chaim; Ramsey-Goldman, Rosalind; Kalunian, Kenneth; Barken, Derren; Conklin, John; Dervieux, Thierry

    2016-01-01

    The relationship between cell-bound complement activation products (CB-CAPs: EC4d, EC3d), anti-C1q, soluble complement C3/C4 and disease activity in systemic lupus erythematosus (SLE) was evaluated. Per protocol, at baseline all SLE subjects enrolled in this longitudinal study presented with active disease and elevated CB-CAPs. At each monthly visit, the non-serological (ns) Safety of Estrogens in Lupus Erythematosus: National Assessment (SELENA-SLEDAI) and the British Isles Lupus Assessment Group (BILAG)-2004 index scores were determined as was a random urinary protein to creatinine ratio (uPCR). Short-form 36 (SF-36) questionnaires were also collected. All soluble markers were determined using immunoassays, while EC4d and EC3d were determined using flow cytometry. Statistical analysis consisted of linear mixed models with random intercept and fixed slopes. A total of 36 SLE subjects (mean age 34 years; 94% female) were enrolled and evaluated monthly for an average 11 visits per subject. Clinical improvements were observed during the study, with significant decreases in ns-SELENA-SLEDAI scores, BILAG-2004 index scores and uPCR, and increases in all domains of SF-36 (pimprovements in at least six out of the eight domains of SF-36 and outperformed C3/C4. Anti-dsDNA titres did not correlate with changes in disease activity. These data indicate that CB-CAPs and anti-C1q are helpful in monitoring patients with SLE.

  2. Application of biotechnology to improve livestock products

    Directory of Open Access Journals (Sweden)

    Swati Gupta

    Full Text Available Biotechnological achievements of recent years have emerged as powerful tool to improve quality attributes of livestock products including milk and meat products. Biotechnological approaches can be employed for improving productivity, economy, physicochemical and nutritional attributes of a wide range of livestock products. The target areas of biotechnological research in the field of livestock products can be envisaged as production of high yielding food animal, improvement in quality of their products, enhanced production of natural food grade preservatives, efficient byproduct utilization and so forth. Many of the biotechnological techniques can be explored in the area of quality assurance programmes, which would be of great help to produce livestock products of assured quality and public health safety. [Vet World 2012; 5(10.000: 634-638

  3. Improving efficiency in pig production

    African Journals Online (AJOL)

    by adopting different strategies for meat production ... lates to some specific nutritional considerations. ... allowances were made for the correlated effects of any change. ... end of her reproductive life the sow is also usually sold for meat ... the experimental work. ... on pigs of up-to-date genotype fed on modern balanced diets.

  4. Improving productivity in the newsroom?

    DEFF Research Database (Denmark)

    Bro, Peter; Reinecke Hansen, Kenneth; Andersson, Ralf

    2016-01-01

    to both the news products, the news processes and the individual news producers. This article is based on newsroom observations, interviews with employees and content analyses, and it shows how the practice of journalism at DR News has been altered in several ways after the implementation of the news...... experience a deskilling and a decrease in autonomy, while others experience an increase in autonomy as part of a process of reskilling and multiskilling...

  5. Improving Global Precipitation Product Access at the GES DISC

    Science.gov (United States)

    Liu, Z.; Vollmer, B.; Savtchenko, A.; Ostrenga, D.; DeShong, B.; Fang, F.; Albayrak, R,; Sherman, E.; Greene, M.; Li, A.; hide

    2018-01-01

    The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has been actively and continually engaged in improving the access to and use of Global Precipitation Measurement (GPM), Tropical Precipitation Measuring Mission (TRMM), and other precipitation data, including the following new services and Ongoing development activities: Updates on GPM products and data services, New features in Giovanni, Ongoing development activities; and Precipitation product and service outreach activities.

  6. Improving functional value of meat products.

    Science.gov (United States)

    Zhang, Wangang; Xiao, Shan; Samaraweera, Himali; Lee, Eun Joo; Ahn, Dong U

    2010-09-01

    In recent years, much attention has been paid to develop meat and meat products with physiological functions to promote health conditions and prevent the risk of diseases. This review focuses on strategies to improve the functional value of meat and meat products. Value improvement can be realized by adding functional compounds including conjugated linoneleic acid, vitamin E, n3 fatty acids and selenium in animal diets to improve animal production, carcass composition and fresh meat quality. In addition, functional ingredients such as vegetable proteins, dietary fibers, herbs and spices, and lactic acid bacteria can be directly incorporated into meat products during processing to improve their functional value for consumers. Functional compounds, especially peptides, can also be generated from meat and meat products during processing such as fermentation, curing and aging, and enzymatic hydrolysis. This review further discusses the current status, consumer acceptance, and market for functional foods from the global viewpoints. Future prospects for functional meat and meat products are also discussed.

  7. Inhibition of protease activity by antisense RNA improves recombinant protein production in Nicotiana tabacum cv. Bright Yellow 2 (BY-2) suspension cells.

    Science.gov (United States)

    Mandal, Manoj K; Fischer, Rainer; Schillberg, Stefan; Schiermeyer, Andreas

    2014-08-01

    Recombinant proteins produced in plant suspension cultures are often degraded by endogenous plant proteases when secreted into the medium, resulting in low yields. To generate protease-deficient tobacco BY-2 cell lines and to retrieve the sequence information, we cloned four different protease cDNAs from tobacco BY-2 cells (NtAP, NtCP, NtMMP1, and NtSP), which represent the major catalytic classes. The simultaneous expression of antisense RNAs against these endogenous proteases led to the establishment of cell lines with reduced levels of endogenous protease expression and activity at late stages of the cultivation cycle. One of the cell lines showing reduced proteolytic activity in the culture medium was selected for the expression of the recombinant full-length IgG1(κ) antibody 2F5, recognizing the gp41 surface protein of HIV-1. This cell line showed significantly reduced degradation of the 2F5 heavy chain, resulting in four-fold higher accumulation of the intact antibody heavy chain when compared to transformed wild type cells expressing the same antibody. N-terminal sequencing data revealed that the antibody has two cleavage sites within the CDR-H3 and one site at the end of the H4-framework region. These cleavage sites are found to be vulnerable to serine proteases. The data provide a basis for further improvement of plant cells for the production of recombinant proteins in plant cell suspension cultures. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Interchange. Program Improvement Products Identified through Networking.

    Science.gov (United States)

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This catalog lists exemplary field-based program improvement products identified by the Dissemination and Utilization Products and Services Program (D&U) at the National Center for Research in Vocational Education. It is designed to increase awareness of these products among vocational educators and to provide information about them that…

  9. Productivity quality improvement at UNC Geotech

    International Nuclear Information System (INIS)

    Jenkins, W.A.

    1987-01-01

    The program to improve productivity is presented in a series of view graphs. Key elements of the program are: CEO leadership and commitment; measurable improvements; specific annual goals; system for sharing benefits of improvements; practical training for employees; and intent to institutionalize

  10. Minimizing activated carbons production cost

    International Nuclear Information System (INIS)

    Stavropoulos, G.G.; Zabaniotou, A.A.

    2009-01-01

    A detailed economic evaluation of activated carbons production process from various raw materials is undertaken using the conventional economic indices (ROI, POT, and NPV). The fundamental factors that affect production cost were taken into account. It is concluded that for an attractive investment in activated carbons production one should select the raw material with the highest product yield, adopt a chemical activation production scheme and should base product price on product-surface area (or more generally on product adsorption capacity for the adsorbate in consideration). A raw material that well meets the above-mentioned criteria is petroleum coke but others are also promising (charcoals, and carbon black). Production cost then can be optimized by determining its minimum value of cost that results from the intercept between the curves of plant capacity and raw material cost - if any. Taking into account the complexity of such a techno-economic analysis, a useful suggestion could be to start the evaluations from a plant capacity corresponding to the break-even point, i. e. the capacity at which income equals production cost. (author)

  11. Productivity improvement with green approach to palm oil factory productivity

    Science.gov (United States)

    Matondang, N.

    2018-02-01

    The palm oil factory (POF) processes fresh fruit bunches into crude palm oil (CPO) and palm kernel oil (PKO) by products in the form of liquid and solid waste. One of the solid wastes produced in POF Tanjung Kasau is empty fruit bunches of palm oil (FBPO) which have been burned completely on incinerator tubes so that potentially produces pollutants that pollute the environment. If FBPO waste is managed properly, it will improve the productivity of the company. Therefore, it is necessary to conduct a study to find out how far the increased productivity of the company can reduce their impact on the environment, if FBPO is used as raw material of liquid smoke. The productivity improvement approach is done by Green Productivity concept, by looking at three aspects: environmental, social and economical. Green Productivity aims to protect the environment simultaneously by increasing the productivity of the company. One way is to turn FBPO waste into liquid smoke product is by pyrolysis process. The results showed that turning FBPO solid waste into liquid smoke will increase productivity by 18.18%. Implementation of Green Productivity can improve productivity through the improvement of FBPO waste treatment process which has been done by perfect combustion by pyrolysis process so that waste can be minimized to create environment industry POF clean and friendly environment.

  12. PWR system reliability improvement activities

    International Nuclear Information System (INIS)

    Yoshikawa, Yuichiro

    1985-01-01

    In Japan lacking in energy resources, it is our basic energy policy to accelerate the development program of nuclear power, thereby reducing our dependence. As referred to in the foregoing, every effort has been exerted on our part to improve the PWR system reliability by dint of the so-called 'HOMEMADE' TQC activities, which is our brain-child as a result of applying to the energy industry the quality control philosophy developed in the field of manufacturing industry

  13. Improved production of kojic acid by mutagenesis of Aspergillus flavus HAk1 and Aspergillus oryzae HAk2 and their potential antioxidant activity.

    Science.gov (United States)

    Ammar, Hala A M; Ezzat, Saeid M; Houseny, Asmaa M

    2017-10-01

    Two wild-type (WT) Aspergillus strains, A. flavus HAk1 and A. oryzae HAk2, were selected for kojic acid (KA) biosynthesis. Malt extract sucrose culture medium (MES) was the best culture medium for maximum production of KA. The maximum production of KA has been estimated at pH 4 after 7 days of incubation at 30 °C. Overproduction of KA was attained by mutagenesis of both A. flavus HAk1 and A. oryzae HAk2 through their exposer to different doses of gamma irradiation. The mutant strains (MT) A. flavus HAk1-M2 and A. oryzae HAk2-M26 were the most stable mutants for maximum production of KA through four generations. Yield of KA by A. oryzae HAk2-M26 and A. flavus HAk1-M2 has been 2.03-fold and 1.9-fold, respectively, higher than their wild-type strains. All WT and MT strains were used for KA production from different agricultural raw materials. Apple peel was the best waste for KA production by WT strains of A. flavus and A. oryzae, while orange peel and rice stalk are best material for KA production by MT strains, A. flavus HAk1-M2 and A. oryzae HAk2-M26, respectively. All experimental strains have the ability to produce considerable amounts of KA from sugarcane molasse (SCM) and sugar-beet molasse (SBM). SBM was better than SCM for KA production by all strains. The antioxidant activity of biosynthesizing KA was strongly affected with production conditions, where the highest antioxidant activity of all strains was recorded at the optimum environmental and nutritional conditions for KA production.

  14. Improving animal productivity by nuclear techniques

    International Nuclear Information System (INIS)

    Garcia, M.; Jayasuriya, M.C.N.; Perera, B.M.A.O.

    1995-01-01

    The IAEA and FAO have run a joint programme for 30 years to assist national agricultural research systems in member states to develop, test and apply nuclear and related techniques for improving the productivity of livestock. Applications of nuclear technologies for improving livestock productivity include: use of radioimmunoassay in animal nutrition researches, animal production, and evaluating feeding and management systems through reproductive performance in a field. Geographic coverage and the type of livestock studies are: grazing animals (cattle, goats and sheep) in Africa, Latin America and Asia, as well as buffalo production in Asia. 6 refs, 8 figs, 6 tabs

  15. Disease activity decrease is associated with improvement in work productivity over 1 year in early axial spondyloarthritis (SPondyloArthritis Caught Early cohort)

    NARCIS (Netherlands)

    van Lunteren, Miranda; Ez-Zaitouni, Zineb; Fongen, Camilla; Landewé, Robert; Ramonda, Roberta; van der Heijde, Désirée; van Gaalen, Floris A.

    2017-01-01

    To assess if a change in disease activity is associated with a change in work productivity loss (WPL) over 1 year in early axial SpA (axSpA) patients. Baseline and 1 year data of axSpA patients in the SPondyloArthritis Caught Early cohort were analysed. Linear regression models were built explaining

  16. Improvement of Artistic Cast Production System

    Directory of Open Access Journals (Sweden)

    Władysiak R.

    2017-09-01

    Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

  17. Improving productivity in the gas industry

    Energy Technology Data Exchange (ETDEWEB)

    Robb, F F; Portsmouth, D J

    1982-05-01

    A study course designed to help BGC managers improve employee productivity reflected four main themes: evaluating quality and performance standards, examining new technologies, exploiting manpower resources, and improving usage of equipment and materials. Visiting speakers' contributions included 1) BGC's broad objectives and its methods of deploying financial resources effectively, 2) creativity as it relates to productivity and to the need for forecasts of risk and catastrophes, and 3) the paramount importance of management's commitment to formally stated objectives.

  18. A Model to Improve the Quality Products

    Directory of Open Access Journals (Sweden)

    Hasan GOKKAYA

    2010-08-01

    Full Text Available The topic of this paper is to present a solution who can improve product qualityfollowing the idea: “Unlike people who have verbal skills, machines use "sign language"to communicate what hurts or what has invaded their system’. Recognizing the "signs"or symptoms that the machine conveys is a required skill for those who work withmachines and are responsible for their care and feeding. The acoustic behavior of technical products is predominantly defined in the design stage, although the acoustic characteristics of machine structures can be analyze and give a solution for the actual products and create a new generation of products. The paper describes the steps intechnological process for a product and the solution who will reduce the costs with the non-quality of product and improve the management quality.

  19. Measuring and improving productivity in general radiology.

    Science.gov (United States)

    Wilt, Michelle A; Miranda, Rafael; Johnson, C Daniel; Love, Peggy Sue

    2010-10-01

    The aim of this study was to determine a method of measuring productivity among general radiographers in a moderate-sized hospital and to improve and sustain productivity within that work area. The average times needed to perform the 13 most common examinations were measured. Performance of the various examinations was tracked and multiplied by the time allocated per procedure; this measure was divided by the length of the work shift to determine productivity. Productivity measures were shared among the work group, and decisions to improve productivity (eg, whether to fill open positions) were made by group members. Average time spent per examination type was calculated (range, 10 minutes to 1 hour 16 minutes). At baseline (February 2008), group productivity was 50%. Productivity increased during the first year of monitoring and was sustained through November 2009 (productivity range, 57%-63%). Yearly savings from not filling open positions were estimated to be $174,000. Productivity in a general radiology work area can be measured. Consensus among the work group helped increase productivity and assess progress. This methodology, if widely adopted, could be standardized and used to compare productivity across departments and institutions. Copyright © 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  20. Improvement of organic meat products nutrition

    OpenAIRE

    Žilytė, Eglė

    2016-01-01

    The aim of the research: to improve the food value indicators of cold-smoked organic meat and implement the quality requirements, which are raised for a national meat products of the company X. To answer the purpose it has been created a new recipe for cold-smoked sausage and cold-smoked minced sausage by using the produced meat in the farm X. It has been evaluated the compliance of the national products quality with the index of food value of improved cold-smoked meat products. It has bee...

  1. Managerial implications for improving continuous production processes

    DEFF Research Database (Denmark)

    Capaci, Francesca; Vanhatalo, Erik; Bergquist, Bjarne

    2017-01-01

    . In this article we highlight SPC and DoE implementation challenges described in the literature for managers, researchers and practitioners interested in continuous production process improvement. The results may help managers support the implementation of these methods and make researchers and practitioners aware......Data analytics remains essential for process improvement and optimization. Statistical process control and design of experiments are among the most powerful process and product improvement methods available. However, continuous process environments challenge the application of these methods...... of methodological challenges in continuous process environments...

  2. Activation Product Inverse Calculations with NDI

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Mark Girard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-27

    NDI based forward calculations of activation product concentrations can be systematically used to infer structural element concentrations from measured activation product concentrations with an iterative algorithm. The algorithm converges exactly for the basic production-depletion chain with explicit activation product production and approximately, in the least-squares sense, for the full production-depletion chain with explicit activation product production and nosub production-depletion chain. The algorithm is suitable for automation.

  3. Physical Activity Improves Quality of Life

    Science.gov (United States)

    ... It Works Healthy Workplace Food and Beverage Toolkit Physical activity improves quality of life Updated:Mar 2,2015 ... proven to improve both mental and physical health. Physical activity boosts mental wellness. Regular physical activity can relieve ...

  4. IAEA Partners with FAO to Improve Livestock Productivity

    International Nuclear Information System (INIS)

    Unger, Hermann

    2013-01-01

    Sound animal production and health activities contribute to the enhancement of global food security through the transfer and implementation of sustainable livestock production systems using nuclear and nuclear related techniques. FAO/IAEA partnered to help Member States improve their livestock productivity through the early and rapid diagnosis and control of transboundary animal diseases. Timely actions protect farmers’ livelihoods and prevent the spread of diseases

  5. IAEA Partners with FAO to Improve Livestock Productivity

    International Nuclear Information System (INIS)

    Unger, Hermann

    2013-01-01

    Sound animal production and health activities contribute to the enhancement of global food security through the transfer and implementation of sustainable livestock production systems using nuclear and nuclear related techniques. FAO/IAEA partnered to help Member States improve their livestock productivity through the early and rapid diagnosis and control of transboundary animal diseases. Timely actions protect farmers’ livelihoods and prevent the spread of diseases. (author)

  6. Improving Accuracy of Processing Through Active Control

    Directory of Open Access Journals (Sweden)

    N. N. Barbashov

    2016-01-01

    Full Text Available An important task of modern mathematical statistics with its methods based on the theory of probability is a scientific estimate of measurement results. There are certain costs under control, and under ineffective control when a customer has got defective products these costs are significantly higher because of parts recall.When machining the parts, under the influence of errors a range scatter of part dimensions is offset towards the tolerance limit. To improve a processing accuracy and avoid defective products involves reducing components of error in machining, i.e. to improve the accuracy of machine and tool, tool life, rigidity of the system, accuracy of the adjustment. In a given time it is also necessary to adapt machine.To improve an accuracy and a machining rate there, currently  become extensively popular various the in-process gaging devices and controlled machining that uses adaptive control systems for the process monitoring. Improving the accuracy in this case is compensation of a majority of technological errors. The in-cycle measuring sensors (sensors of active control allow processing accuracy improvement by one or two quality and provide a capability for simultaneous operation of several machines.Efficient use of in-cycle measuring sensors requires development of methods to control the accuracy through providing the appropriate adjustments. Methods based on the moving average, appear to be the most promising for accuracy control since they include data on the change in some last measured values of the parameter under control.

  7. Production Practice During Language Learning Improves Comprehension.

    Science.gov (United States)

    Hopman, Elise W M; MacDonald, Maryellen C

    2018-04-01

    Language learners often spend more time comprehending than producing a new language. However, memory research suggests reasons to suspect that production practice might provide a stronger learning experience than comprehension practice. We tested the benefits of production during language learning and the degree to which this learning transfers to comprehension skill. We taught participants an artificial language containing multiple linguistic dependencies. Participants were randomly assigned to either a production- or a comprehension-learning condition, with conditions designed to balance attention demands and other known production-comprehension differences. After training, production-learning participants outperformed comprehension-learning participants on vocabulary comprehension and on comprehension tests of grammatical dependencies, even when we controlled for individual differences in vocabulary learning. This result shows that producing a language during learning can improve subsequent comprehension, which has implications for theories of memory and learning, language representations, and educational practices.

  8. Determinants Of Adoption Of Improved Cassava Production ...

    African Journals Online (AJOL)

    Descriptive statistics and multiple regression analysis were used to analyse the field data The identified cassava production technologies at different stages of adoption by the respondents are use of improved cassava cuttings, use of herbicides/pesticides, Alternate row/crop geometry in a cassava /maize/yam intercrop, ...

  9. Improving bambara groundnut productivity using gamma irradiation ...

    African Journals Online (AJOL)

    In recent times efforts are being made to improve the productivity of bambara groundnut. Studies were initiated (i) to characterise and evaluate landraces and to select superior ones for irradiation, (ii) to induce genetic variation through gamma irradiation and (iii) to use biotechnological approaches to shorten the generation ...

  10. Improved photon production data for MCNP trademark

    International Nuclear Information System (INIS)

    Adams, A.A.; Frankle, S.C.; Little, R.C.

    1998-04-01

    Computer simulations with MCNP are often used to obtain information from measurements of neutron induced gamma-ray spectra. For such simulations to be useful, the complicated spectra produced by a wide variety of nuclides must be reproduced, requiring high quality nuclear data. A previous assessment of the neutron induced photon production data in the MCNP data libraries indicated a need for improvement. The photon production data were often based on outdated experiments and binned in such wide energy groups as to be of limited value for some applications. This paper describes the work that is underway at Los Alamos National Laboratory to improve the photon production data for thermal neutron capture reactions. To date, high quality photon production data for each stable isotope of chlorine, chromium, iron, copper, and nickel have been obtained. The improved spectra have been incorporated into ENDF formatted evaluations and processed into corresponding MCNP data files. Similar improvements for aluminum, manganese, silicon, calcium, and vanadium are also planned. The methodology used to produce the spectra is discussed, and sample results for chlorine are presented

  11. Secondary Products (Markets, Competition, and Technological Improvements)

    Science.gov (United States)

    Philip A. Araman

    1988-01-01

    Competitiveness, imports, exports, and technological improvements--these are issues facing secondary wood-product manufacturers. The major problems focus on increasing foreign imports and the inability of U.S. industries to repell the imports. How and where should we, as researchers, allocate our efforts to enhance the competitiveness of secondary forest industries in...

  12. Simulation Study of a Vehicle Production Line for Productivity Improvement

    Directory of Open Access Journals (Sweden)

    M.F.F. Ab Rashid

    2015-06-01

    Full Text Available This paper presents the study of a motorcycle frame production line in a particular company in Malaysia. Due to the high demand, the company needs to increase its production by at least 12% compared with current output. In order to improve productivity, the production-floor data was collected and simulated using the discrete event simulation approach. Later, a number of suggestions for improvement were simulated to identify the effect of the suggestions on productivity. In addition, cost analysis was also undertaken to identify the profit margin for a particular period of time for each suggestion. Simulation results indicate that there are three suggestions that are able to fulfill the 12% volume increment. In the short term, the suggestion to hire an assistant line leader will give instant effect to the profit. Meanwhile, for the medium term, Poka-yoke will give higher profit compared with the others, while in the long term, SOP (standard operating procedure implementation will yield a better profit margin. In future, the simulation of a dynamic demand model for this product is suggested to cope with new trends in the market.

  13. TECHNICAL AND ORGANIZATIONAL IMPROVEMENTS OF PACKAGING PRODUCTION PROCESS

    Directory of Open Access Journals (Sweden)

    Anna Rudawska

    2016-06-01

    Full Text Available Due to customer driven economies, today’s world markets are characterized by high fluctuations in market demand and the frequent arrival of new technologies and new products. To stay competitive in such markets manufacturing companies require continuous improvements both in technical and organizational areas of their activity. The paper presents results of the diagnosis provided in the manufacturing area of the company producing cardboard packages and recommendations to make the production process more efficient. Especially, among the proposed technical and organizational recommendations the most important ones are: automation of certain elements of the production process and changes in production plant layout.

  14. Improving productivity and firm performance with enterprise resource planning

    Science.gov (United States)

    Beheshti, Hooshang M.; Beheshti, Cyrus M.

    2010-11-01

    Productivity is generally considered to be the efficient utilisation of organisational resources and is measured in terms of the efficiency of a worker, company or nation. Focusing on efficiency alone, however, can be harmful to the organisation's long-term success and competitiveness. The full benefits of productivity improvement measures are realised when productivity is examined from two perspectives: operational efficiency (output/input) of an individual worker or a business unit as well as performance (effectiveness) with regard to end user or customer satisfaction. Over the years, corporations have adopted new technology to integrate business activities in order to achieve both effectiveness and efficiency in their operations. In recent years, many firms have invested in enterprise resource planning (ERP) in order to integrate all business activities into a uniform system. The implementation of ERP enables the firm to reduce the transaction costs of the business and improve its productivity, customer satisfaction and profitability.

  15. Design of production process main shaft process with lean manufacturing to improve productivity

    Science.gov (United States)

    Siregar, I.; Nasution, A. A.; Andayani, U.; Anizar; Syahputri, K.

    2018-02-01

    This object research is one of manufacturing companies that produce oil palm machinery parts. In the production process there is delay in the completion of the Main shaft order. Delays in the completion of the order indicate the low productivity of the company in terms of resource utilization. This study aimed to obtain a draft improvement of production processes that can improve productivity by identifying and eliminating activities that do not add value (non-value added activity). One approach that can be used to reduce and eliminate non-value added activity is Lean Manufacturing. This study focuses on the identification of non-value added activity with value stream mapping analysis tools, while the elimination of non-value added activity is done with tools 5 whys and implementation of pull demand system. Based on the research known that non-value added activity on the production process of the main shaft is 9,509.51 minutes of total lead time 10,804.59 minutes. This shows the level of efficiency (Process Cycle Efficiency) in the production process of the main shaft is still very low by 11.89%. Estimation results of improvement showed a decrease in total lead time became 4,355.08 minutes and greater process cycle efficiency that is equal to 29.73%, which indicates that the process was nearing the concept of lean production.

  16. Radiopharmaceuticals production activities in Egypt

    International Nuclear Information System (INIS)

    Raieh, M.

    1998-01-01

    Applications of radiopharmaceuticals and labelled compounds in the field of nuclear medicine in Egypt have increased so rapidly in the last few years. At present, a large number of hospitals are utilizing these radioisotopic techniques for both diagnosis and treatment. The following production activities are taking place in the Egyptian Radioisotope Production laboratories. By utilizing the research reactor a large number of radioisotopes which find wide applications in nuclear medicine were produced, such as iodine-131, phosphorus-32, sodium-24, potassium-42 and molybdenum-99 / technetium-99m generators. Gallium-67, indium-111 and iodine-123 will be produced locally after installation of the cyclotron at the end of 1998. A large number of Tc-99m based kits for diagnostic medical applications have been produced. Also, many radiopharmaceuticals labelled with iodine-131 were produced. The radioisotope production laboratory is able to supply many hospitals with the radioimmunoassay kits of the thyroid related hormones (T4, T3 and TSH). Research and development activities are taking place in the field of monoclonal antibodies and tumor markers with special consideration of AFP, CEA, PSA and βhCG. (author)

  17. Applying Triz for Production Quality Improvement

    Directory of Open Access Journals (Sweden)

    Swee Nikalus Shu Luing

    2017-01-01

    Full Text Available This paper aims to provide a thorough analysis on the application of TRIZ in improving the quality of canned food production. TRIZ tools such as engineering systems analysis, function analysis, cause and effect chain analysis, By-separation model and 40 Inventive Principles are applied in order to discover some feasible and elegant solutions to alleviate the problem. Findings revealed that the rejected canned products on the conveyor belt will be isolated or picked up with other good condition canned products which are lined up very closely to the rejected cans; though the visioning system is able detect the fault printing on the canned product. The main root cause is that the rejected canned product is picked up with other canned products in good condition because all cans are lined up on the belt and are very close to each other or having no gaps between the cans. Conversely, all cans on the conveyor belts are required to be very close to each other to avoid collisions that may damage the cans. The root cause is solved by applying function analysis, By-separation tool and Inventive Principles. Therefore, it can be concluded that TRIZ is a powerful tool in inventive problem solving.

  18. Sustainable Improvement of Animal Production and Health

    International Nuclear Information System (INIS)

    Odongo, N.E.; Garcia, M.; Viljoen, G.J.

    2010-01-01

    The world's poorest people, some one billion living mostly in Africa and Asia, depend on livestock for their day-to-day livelihood. To reduce poverty, fight hunger and ensure global food security, there is an urgent need to increase livestock production in sustainable ways. However, livestock production in developing countries is constrained by low genetic potential of the animals, poor nutrition and husbandry practices and infectious diseases. Nuclear techniques, when applied in conjunction with conventional methods, can identify constraints to livestock productivity as well as interventions that lead to their reduction or elimination in ways that are economically and socially acceptable. The challenge is how best to exploit these techniques for solving problems faced by livestock keepers within the many agricultural production systems that exist in developing countries and demonstrating their advantages to owners, local communities and government authorities. This publication is a compilation of the contributions emanating from an international Symposium on Sustainable Improvement of Animal Production and Health organised by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in cooperation with the Animal Production and Health Division of FAO. It provides invaluable information not only on how nuclear and related techniques can be used to support sustainable livestock production systems, but also about the constraints and opportunities for using these techniques in developing countries; it also attempts to identify specific research needs and gaps and new options for using these techniques for solving established and emerging problems. As such, it is hoped that the information presented and suggestions made will provide valuable guidance to scientists in both the public and private sectors as well as to government and institutional policy and decision makers. The Symposium comprised a plenary session and four thematic sessions, covering (i

  19. Sustainable Improvement of Animal Production and Health

    Energy Technology Data Exchange (ETDEWEB)

    Odongo, N E; Garcia, M; Viljoen, G J [Animal Production and Health Subprogramme, Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, Department of Nuclear Sciences and Applications, International Atomic Agency, Vienna (Austria)

    2010-07-01

    The world's poorest people, some one billion living mostly in Africa and Asia, depend on livestock for their day-to-day livelihood. To reduce poverty, fight hunger and ensure global food security, there is an urgent need to increase livestock production in sustainable ways. However, livestock production in developing countries is constrained by low genetic potential of the animals, poor nutrition and husbandry practices and infectious diseases. Nuclear techniques, when applied in conjunction with conventional methods, can identify constraints to livestock productivity as well as interventions that lead to their reduction or elimination in ways that are economically and socially acceptable. The challenge is how best to exploit these techniques for solving problems faced by livestock keepers within the many agricultural production systems that exist in developing countries and demonstrating their advantages to owners, local communities and government authorities. This publication is a compilation of the contributions emanating from an international Symposium on Sustainable Improvement of Animal Production and Health organised by the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture in cooperation with the Animal Production and Health Division of FAO. It provides invaluable information not only on how nuclear and related techniques can be used to support sustainable livestock production systems, but also about the constraints and opportunities for using these techniques in developing countries; it also attempts to identify specific research needs and gaps and new options for using these techniques for solving established and emerging problems. As such, it is hoped that the information presented and suggestions made will provide valuable guidance to scientists in both the public and private sectors as well as to government and institutional policy and decision makers. The Symposium comprised a plenary session and four thematic sessions, covering (i

  20. Legal improvements brighten North Africa production outlook

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    North Africa's three main oil producing countries soon will reap benefits of past moves by their governments to encourage investment by international companies. Production of crude oil and natural gas in Algeria, Egypt, and Libya is ready to increase from suppressed levels of the recent past, says International Energy Agency, Paris. The gains are possible despite political risks, total reserves accounting for only 4% of the world's crude reserves, and oil prices well below levels of the 1980s, when the countries' flow rates peaked. The reason: producing oil in North Africa is profitable. In a recent study entitled North Africa Oil and Gas, IEA attributes the bright production outlook to improvements that the countries' governments have made in the past decade to hydrocarbon laws and the fiscal terms they offer international investors. According to announced plans, the three countries' combined capacity to produce crude oil will rise 18% by the year 2000 to 3.65 million b/d, and a further gain of 700,000 b/d is possible. IEA expects production capacity for natural gas to increase 50% from its 1995 level by 2000 to a combined 139.4 billion cu m/year. This paper discusses production capacities, Algeria's record, improvements in Egypt, and Libya's changes

  1. Improving the yield from fermentative hydrogen production.

    Science.gov (United States)

    Kraemer, Jeremy T; Bagley, David M

    2007-05-01

    Efforts to increase H(2) yields from fermentative H(2) production include heat treatment of the inoculum, dissolved gas removal, and varying the organic loading rate. Although heat treatment kills methanogens and selects for spore-forming bacteria, the available evidence indicates H(2) yields are not maximized compared to bromoethanesulfonate, iodopropane, or perchloric acid pre-treatments and spore-forming acetogens are not killed. Operational controls (low pH, short solids retention time) can replace heat treatment. Gas sparging increases H(2) yields compared to un-sparged reactors, but no relationship exists between the sparging rate and H(2) yield. Lower sparging rates may improve the H(2) yield with less energy input and product dilution. The reasons why sparging improves H(2) yields are unknown, but recent measurements of dissolved H(2) concentrations during sparging suggest the assumption of decreased inhibition of the H(2)-producing enzymes is unlikely. Significant disagreement exists over the effect of organic loading rate (OLR); some studies show relatively higher OLRs improve H(2) yield while others show the opposite. Discovering the reasons for higher H(2) yields during dissolved gas removal and changes in OLR will help improve H(2) yields.

  2. Active agents in common skin care products.

    Science.gov (United States)

    Draelos, Zoe Diana

    2010-02-01

    Skin care products are numerous and perplexing, yet the majority fall into the moisturizer category. Moisturizers are substances designed to improve and maintain the skin barrier. They serve as a vehicle for the delivery of active ingredients that minimize facial lines of dehydration, deliver photoprotection, and provide antioxidant properties. Moisturizers are based on occlusive substances, such as petrolatum and dimethicone, and humectant substances, such as glycerin, with a variety of sunscreens and botanicals for added functionality and marketing impact. This article reviews these common active agents. The plethora of over-the-counter skin care products available for patient purchase is overwhelming, yet there is certain commonality among 80 percent of the formulations. The majority of the products are moisturizers with added ingredients to support marketing claims. Whether the product is a facial foundation, an antiaging night cream, a sunscreen, a topical antioxidant, or a skin-lightening serum, the formulation is basically a moisturizer. Sunscreen is the most biologically active antiaging ingredient in skin care products, but the antiinflammatory and antioxidant effects of botanicals possess tremendous marketing appeal.

  3. Role of Ca-bentonite to improve the humification, enzymatic activities, nutrient transformation and end product quality during sewage sludge composting.

    Science.gov (United States)

    Awasthi, Mukesh Kumar; Awasthi, Sanjeev Kumar; Wang, Quan; Awasthi, Mrigendra Kumar; Zhao, Junchao; Chen, Hongyu; Ren, Xiuna; Wang, Meijing; Zhang, Zengqiang

    2018-04-10

    This study was aimed to examine the response of Ca-bentonite (CB) amendment to improve the sewage sludge (SS) composting along with wheat straw (WS) as bulking agent. Five treatments (SS + WS) were mixed with or without blending of discrepant concentration of CB (2%, 4%, 6%, and 10%), respectively, and without CB added treatment applied as the control. The results showed that compared to control and 2%CB blended treatments, while the 6-10%CB -amended treatment indicated maximum enzymatic activities with the composting progress and highest organic matter degradation and loss. The amendment of 6-10%CB increased the humic acid, HA/FA ratio, DON, NH 4 + -N, NO 3 and DOC but reduced the fulvic acids content and the maturity period by 2 weeks as compared to control. In addition, maturity parameters also confirmed that the highest seed germination was observed with the 10%CB applied compost followed by 6%CB, 4%CB and 2%CB applied treatments, respectively. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Direct fuel cell product design improvement

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H.C.; Farooque, M. [Energy Research Corp., Danbury, CT (United States)

    1996-12-31

    Significant milestones have been attained towards the technology development field testing and commercialization of direct fuel cell power plant since the 1994 Fuel Cell Seminar. Under a 5-year cooperative agreement with the Department of Energy signed in December 1994, Energy Research Corporation (ERC) has been developing the design for a MW-scale direct fuel cell power plant with input from previous technology efforts and the Santa Clara Demonstration Project. The effort encompasses product definition in consultation with the Fuel Cell Commercialization Group, potential customers, as well as extensive system design and packaging. Manufacturing process improvements, test facility construction, cell component scale up, performance and endurance improvements, stack engineering, and critical balance-of-plant development are also addressed. Major emphasis of this product design improvement project is on increased efficiency, compactness and cost reduction to establish a competitive place in the market. A 2.85 MW power plant with an efficiency of 58% and a footprint of 420 m{sup 2} has been designed. Component and subsystem testing is being conducted at various levels. Planning and preparation for verification of a full size prototype unit are in progress. This paper presents the results obtained since the last fuel cell seminar.

  5. IMPROVEMENT OF THE PRODUCT AND QUALITY OF POGOSTEMON CABLIN BENTH

    Directory of Open Access Journals (Sweden)

    Allwar Allwar

    2014-07-01

    Full Text Available Pogostemon cablin benth is an economic source of farmer communities which are presence in several provinces in Indonesia. In general, the production and quality of the Pogostemon cablin benth produced by the farmers are still low or under the standard ISO. The chelating method, the influence of pH and adsorption method with activated carbon and montmorilonite  were carried out to improve the production and quality of Pogostemon cablin benth. The results show that the production and the quality tends to be better proved by the color changes to yellow bright, reduced metal contents and an increase in Pogostemon cablin benth

  6. Radiation technology of improved quality materials production

    International Nuclear Information System (INIS)

    Zajkin, Yu.A.; Nadirov, N.K.; Zajkina, R.F.

    1997-01-01

    The technology of materials production from metals and alloys with high operational properties is developed. The technology is based on use of radiation methods in powder metallurgy. Use of radiation processing allows to improve technological conditions of sintering. It is established, that in certain regimes the sintering temperature is decreasing from 1200 deg C up to 950 deg C in the result of radiation processing of stainless steel powders . According to the processing regimes it is possible load reduction by powder pressing on 15-20 % and sintering time in to 1,5 - 2 times . The radiation methods give possibility to produce high qualitative goods from cheap powder materials without use energy-intensive processes and prolonged processing of finished products

  7. Improving smallholder livelihoods: Dairy production in Tanzania

    Directory of Open Access Journals (Sweden)

    Edward Ulicky

    2013-12-01

    Full Text Available Tanzania is primarily an agro-based economy, characterized by subsistence agricultural production that employs more than 80% of the population and contributes up to 45% of the GDP (2005. This country is endowed with a cattle population of 21.3 M, composed mainly of indigenous Zebu breeds and about 680 000 improved dairy animals. About 70% of the milk produced comes from the traditional sector (indigenous cattle kept in rural areas, while the remaining 30% comes from improved cattle, mainly kept by smallholder producers. In Northern Tanzania and particularly in Hai district of Kilimanjaro Region, some dairy farmers organize themselves into small producer groups for the purpose of milk collecting, marketing and general promotion of the dairy sector in their community. Nronga Women Dairy Cooperative Society (NWDCS Limited is one of such organizations dedicated to improve the well-being of the Nronga village community through promoting small-scale dairy farming and its flow-on benefits. Milk flows out of the village, and services for investment and dairy production flow into the village, ensuring a sustainable financial circulation necessary for poverty reduction, rural development and better life for the rural community. In 2001 NWDCS introduced a school milk feeding program that has attracted Australian donors since 2005. Guided by Global Development Group, a multi-faceted project, integrating micro-enterprises, business, education and child health/nutrition, was proposed and initiated by building a dairy plant in Hai District headquarters, the Boma plant. In March 2013, the Australian High Commission to East Africa approved Direct Aid Program funding of AUD 30 000 towards the NWDCS - Biogas Pilot Project in Tanzania, which included the renovation of zero-grazing cow shade units, the construction of 6-m3 biodigester plants on each farm, and encouragement of the use of bioslurry for pasture production and home gardens.

  8. TPM- A KEY STRATEGY FOR PRODUCTIVITY IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    J.S. DUREJA

    2011-02-01

    Full Text Available During high growth era companies are making technical progress in automation and centralization of the plants, which needs large amount of manual work to maintain the automation systems. The strategy of maintaining the equipment of a plant is crucial for the effectiveness of manufacturing. Total productive maintenance (TPM is a maintenance program, which involves concepts for maintaining plant and equipments effectively. In this paper detailed implementation of TPM in the cold rolling plant is discussed. Results achieved are quite encouraging in terms of motivated employees, improvement in overall equipment effectiveness (OEE and reduction in no. of accidents on shop floor.

  9. C-E productivity improvement program

    International Nuclear Information System (INIS)

    Chiu, C.; Ching, B.; Van Haltern, M.L.

    1984-01-01

    This paper describes the C-E Productivity Improvement Program (CEPIP), which is a computer algorithm for heat rate monitoring and diagnostics for a nuclear power plant. CEPIP uses the pattern recognition technique to identify cause(s) of heat rate degradation. The benefits of such an automated program to the plant performance engineer include early identification of the degrading component(s), provision of necessary economic information (cost of energy loss) to the performance engineer so that he can decide when to repair the degrading components, and identification of operator actions resulting in heat rate degradation (such as closing the valve on the live steam extraction line for the second stage of reheat). In summary, CEPIP improves the overall plant performance by increasing the capacity factor. CEPIP was developed to meet the growing needs of the utilities for an automated performance program. The diagnostic capability has been verified by plant data

  10. Application of Modern Technologies for Nuclear Power Plant Productivity Improvements

    International Nuclear Information System (INIS)

    Joseph, A. Naser

    2011-01-01

    The nuclear power industry in several countries is concerned about the ability to maintain current high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, new requirements and commitments, unnecessary workloads and stress levels, and human errors. Current plant operations are labor-intensive due to the vast number of operational and support activities required by the commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the desire by many plants to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New productivity improvement capabilities with measurable economic benefits are needed so that a successful business case can be made for their use. Improved and new instrumentation and control, human-system interface, information and communications technologies used properly can address concerns about cost-effectively maintaining current performance levels and enable shifts to even higher performance levels. This can be accomplished through the use of new technology implementations to improve productivity, reduce costs of systemic inefficiencies and avoid unexpected costs. Many of the same type of productivity improvements for operating plants will be applicable for new plants. As new plants are being built, it is important to include these productivity improvements or at least provide the ability to implement them easily later

  11. IMPROVING CAUSE DETECTION SYSTEMS WITH ACTIVE LEARNING

    Data.gov (United States)

    National Aeronautics and Space Administration — IMPROVING CAUSE DETECTION SYSTEMS WITH ACTIVE LEARNING ISAAC PERSING AND VINCENT NG Abstract. Active learning has been successfully applied to many natural language...

  12. Toyota production system quality improvement initiative improves perioperative antibiotic therapy.

    Science.gov (United States)

    Burkitt, Kelly H; Mor, Maria K; Jain, Rajiv; Kruszewski, Matthew S; McCray, Ellesha E; Moreland, Michael E; Muder, Robert R; Obrosky, David Scott; Sevick, Mary Ann; Wilson, Mark A; Fine, Michael J

    2009-09-01

    To assess the role of a Toyota production system (TPS) quality improvement (QI) intervention on appropriateness of perioperative antibiotic therapy and in length of hospital stay (LOS) among surgical patients. Pre-post quasi-experimental study using local and national retrospective cohorts. We used TPS methods to implement a multifaceted intervention to reduce nosocomial methicillin-resistant Staphylococcus aureus infections on a Veterans Affairs surgical unit, which led to a QI intervention targeting appropriate perioperative antibiotic prophylaxis. Appropriate perioperative antibiotic therapy was defined as selection of the recommended antibiotic agents for a duration not exceeding 24 hours from the time of the operation. The local computerized medical record system was used to identify patients undergoing the 25 most common surgical procedures and to examine changes in appropriate antibiotic therapy and LOS over time. Overall, 2550 surgical admissions were identified from the local computerized medical records. The proportion of surgical admissions receiving appropriate perioperative antibiotics was significantly higher (P <.01) in 2004 after initiation of the TPS intervention (44.0%) compared with the previous 4 years (range, 23.4%-29.8%) primarily because of improvements in compliance with antibiotic therapy duration rather than appropriate antibiotic selection. There was no statistically significant decrease in LOS over time. The use of TPS methods resulted in a QI intervention that was associated with an increase in appropriate perioperative antibiotic therapy among surgical patients, without affecting LOS.

  13. Improved processes of molybdenum-99 production

    International Nuclear Information System (INIS)

    Dadachova, K.; La Riviere, K.; Anderon, P.

    1997-01-01

    Two improved processes of Molybdenum-99 production have been developed at ANSTO on laboratory scale. The first one allows to purify Mo of natural isotopic composition from tungsten impurities by using preferential adsorption of tungsten on hydrated tin(IV) oxide SnO 2 x nH 2 O before irradiation in the nuclear reactor. Mo-99 obtained via this route can be used for production of i nstant Tc-99m. As the starting material MoO 3 contains considerable amounts of tungsten impurity (W > 60 ppm), 5-7 days irradiation results in generation of W-188 in amounts sufficient to contaminate the final Tc-99m product with rhenium-188 (Re-188, 16.8 h half-life) - radioactive daughter of W-188. To overcome this problem, a method of MoO 3 purification from W, based on preferential adsorption of W by hydrated tin (IV) oxide has been developed. The contents of W in MoO 3 purified by this technique became 3 and retaining of Mo-99 on a large alumina column. Mo-99 is stripped off the column with 200 mL 1M NH 4 OH followed by loading this solution onto the AG 1x8 column. The next steps are different for each version of separation process

  14. Production and characterization of granular activated carbon from activated sludge

    Directory of Open Access Journals (Sweden)

    Z. Al-Qodah

    2009-03-01

    Full Text Available In this study, activated sludge was used as a precursor to prepare activated carbon using sulfuric acid as a chemical activation agent. The effect of preparation conditions on the produced activated carbon characteristics as an adsorbent was investigated. The results indicate that the produced activated carbon has a highly porous structure and a specific surface area of 580 m²/g. The FT-IR analysis depicts the presence of a variety of functional groups which explain its improved adsorption behavior against pesticides. The XRD analysis reveals that the produced activated carbon has low content of inorganic constituents compared with the precursor. The adsorption isotherm data were fitted to three adsorption isotherm models and found to closely fit the BET model with R² equal 0.948 at pH 3, indicating a multilayer of pesticide adsorption. The maximum loading capacity of the produced activated carbon was 110 mg pesticides/g adsorbent and was obtained at this pH value. This maximum loading was found experimentally to steeply decrease as the solution pH increases. The obtained results show that activated sludge is a promising low cost precursor for the production of activated carbon.

  15. Strength improvement of fibre cement product

    Directory of Open Access Journals (Sweden)

    Waranya Sonphuak

    2013-10-01

    Full Text Available This paper presents a methodology to improve the strength or the Modulus of Rupture (MOR of fibre cement. The Six Sigma approach with the DMAIC steps was applied to a case study company. This research started from defining problem, setting the project objective and the project scope. Next, the measurement system was analyzed and the process map was set up. The potential factors of the problem was then determined. Due to there were many factors that affect the MOR, the Cause and Effect Matrix and the Failure Mode and Effect Analysis technique were then used to reduce the number of factors to be studied further. Next, three process factors, which were the pulp slurry freeness, the film-layer thickness, and the pressure step, were optimized using the results from the Box-Behnken experimental design. Other 13 remaining factors were improved by creating or revising the standard work instructions and training the operators. After that, the statistical process control and the control plan were set up to control the production processes. After improvement, the process capability index (Ppk significantly increased from 0.26 to 1.35.

  16. Improving hospital cost accounting with activity-based costing.

    Science.gov (United States)

    Chan, Y C

    1993-01-01

    In this article, activity-based costing, an approach that has proved to be an improvement over the conventional costing system in product costing, is introduced. By combining activity-based costing with standard costing, health care administrators can better plan and control the costs of health services provided while ensuring that the organization's bottom line is healthy.

  17. Improving food and agricultural production in Thailand

    International Nuclear Information System (INIS)

    Snitwongse, P.; Lamm, C.G.

    1987-01-01

    In the early 1960s, the IAEA and FAO jointly initiated the first in a series of large-scale multi-faceted agricultural field projects using nuclear techniques in agricultural sciences. The first project, in Yugoslavia, served as a model for future ones in India, Brazil, Bangladesh, Republic of Korea, Venezuela, and Thailand. The Thailand project - for the time being the last one of this series - started in January 1986 for a 5-year period, the project carries major objectives centering on the use of isotopes, radiation, and related technologies in three particular areas: Mutation breeding. Scientists are aiming to generate new genetic sources of disease-resistant varieties of crops that are economically important; Soil Science. Aims are to help farmers make the best use of fertilizers, biofertilizers, and water, and to maximize biological nitrogen fixation and the use of local rock phosphates as sources of crop nutrients; Animal science. Project scientists are aiming to improve livestock productivity on small farms

  18. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    Energy Technology Data Exchange (ETDEWEB)

    H.C. Maru; M. Farooque

    2003-03-01

    The program efforts are focused on technology and system optimization for cost reduction, commercial design development, and prototype system field trials. The program is designed to advance the carbonate fuel cell technology from full-size field test to the commercial design. FuelCell Energy, Inc. (FCE) is in the later stage of the multiyear program for development and verification of carbonate fuel cell based power plants supported by DOE/NETL with additional funding from DOD/DARPA and the FuelCell Energy team. FCE has scaled up the technology to full-size and developed DFC{reg_sign} stack and balance-of-plant (BOP) equipment technology to meet product requirements, and acquired high rate manufacturing capabilities to reduce cost. FCE has designed submegawatt (DFC300A) and megawatt (DFC1500 and DFC3000) class fuel cell products for commercialization of its DFC{reg_sign} technology. A significant progress was made during the reporting period. The reforming unit design was optimized using a three-dimensional stack simulation model. Thermal and flow uniformities of the oxidant-In flow in the stack module were improved using computational fluid dynamics based flow simulation model. The manufacturing capacity was increased. The submegawatt stack module overall cost was reduced by {approx}30% on a per kW basis. An integrated deoxidizer-prereformer design was tested successfully at submegawatt scale using fuels simulating digester gas, coal bed methane gas and peak shave (natural) gas.

  19. Electricity production shows improvement across Canada

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    In the first half of 1991, electricity production from Canadian utilities improved substantially compared to the first half of 1990. Canada was a net importer of 5332 GWh in January-June 1990 while it was a net exporter of 5250 GWh in January-June 1991. The largest single factor in this reversal is the improved performance of Ontario Hydro's CANDU reactors. Total acid gas emissions by Ontario Hydro for 1991 are expected to total 240,000 tonnes, about the same as 1990, but at much higher capacity factors. A combination of recession, private power generation, and the startup of the Seabrook nuclear station have put a brake on power exports to the USA. New Brunswick Power exports were not only affected by the new capacity at Seabrook but also because of low water conditions at its hydroelectric plants. Hydro-Quebec generated 300 GWh more hydraulic energy in June 1991 than in June 1990 and its Gentilly-2 nuclear station has been operating at 96.7% capacity. The Quebec utility exported 1215 GWh to the USA and 2121 GWh to other Canadian utilities in January-June 1991, compared to 1602 GWh and 2232 GWh resspectively in January-June 1990. 1 tab

  20. Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

    Science.gov (United States)

    Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

    2014-01-01

    Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

  1. An Alginate/Cyclodextrin Spray Drying Matrix to Improve Shelf Life and Antioxidant Efficiency of a Blood Orange By-Product Extract Rich in Polyphenols: MMPs Inhibition and Antiglycation Activity in Dysmetabolic Diseases.

    Science.gov (United States)

    Lauro, Maria Rosaria; Crascì, Lucia; Giannone, Virgilio; Ballistreri, Gabriele; Fabroni, Simona; Sansone, Francesca; Rapisarda, Paolo; Panico, Anna Maria; Puglisi, Giovanni

    2017-01-01

    Alginate and β -cyclodextrin were used to produce easily dosable and spray-dried microsystems of a dried blood orange extract with antidysmetabolic properties, obtained from a by-product fluid extract. The spray-dried applied conditions were able to obtain a concentrate dried extract without the loss of AOA and with TPC and TMA values of 35-40% higher than that of the starting material. They were also effective in producing microparticles with 80-100% of encapsulation efficiency. The 2% sodium alginate was capable of improving the extract shelf life , while the beta-cyclodextrin (1 : 1 molar ratio with dried extract) prolonged the extract antioxidant efficiency by 6 hours. The good inhibition effect of the dried extract on the AGE formation and the MMP-2 and MMP-9 activity is presumably due to a synergic effect exerted by both anthocyanin and bioflavonoid extract compounds and was improved by the use of alginate and cyclodextrin.

  2. Isotopes for the improvement of industrial products

    International Nuclear Information System (INIS)

    Schultze-Kraft, P.

    1978-01-01

    Full text: For many years the International Atomic Energy Agency has been giving technical assistance to developing countries on the application of radioisotopes in medicine, agriculture and hydrology. With increasing industrialization, these countries feel a growing need for the use of isotopic methods as a means of improving the control of production processes and the quality of industrial products. In response to the demand for training in this field, the IAEA recently held its first Regional Training Course in the Practical Use of Radioisotope Techniques in Industry for Process and Quality Control. The course was given from 27 March to 28 April 1978 at the Instituto Venezolano de Investigaciones Cientificas (IVIC) in Caracas, Venezuela, in co-operation with the Consejo Nacional para el Desarrollo de la Industria Nuclear (CONAN) and the Junta del Acuerdo de Cartagena. It was financed jointly by the IAEA and CONAN, and in addition received a special contribution by the Government of the Federal Republic of Germany. Participants were 18 engineers and physicists from Bolivia, Chile, Colombia, Ecuador, Peru and Venezuela, and the lecturers came from Denmark, Federal Republic of Germany, Poland and the host country. Course directors were Dr. J.J. Henriquez (IVIC) and Dr. L. Wiesner (IAEA expert). The idea of the course was to demonstrate that radioisotope techniques can considerably reduce production costs by optimizing industrial processes and making more efficient use of raw materials. It is estimated that the paper industry in the USA, for example, is saving about 100 million dollars per year through the application of radioisotopes. During the training course, the participants gained practical experience in applying isotopic techniques in several fields: in a paper mill at Moron they measured the weight per surface area, and in the cement factory of Ocumare del Tuy the residence time of clinker, at the new international airport of Maiquetia they determined the

  3. Production improvements plug water effluent by 90 percent

    Energy Technology Data Exchange (ETDEWEB)

    Wett, T.

    1993-03-01

    Ciba-Geigy Corp. is a wholly owned subsidary of Ciba-Geigy Ltd., a publicly owned company headquartered in Basel, Switzerland. The subsidary's St. Gabriel, LA, production site contains operations of the Agricultural and Textile Products divisions. The latter division has been involved in the dyestuff industry for more than 200 years. In late 1991, dyestuff production was initiated in the St. Gabriel Delta manufacturing facility. Here, a series of environmentally sound products - dyes for use in nylon carpeting, automotive products, towels, paper napkins, and cotton sportswear and other fabrics - are made using only water-soluble materials. Ciba Corp. actively participates in the Chemical Manufacturers Association's Responsible Care[reg sign] Initiative. In practice, the company strives to actively reflect the goals of the initiative for continuous improvement in environmental performance. Under its operating permit, the Delta plant is permitted a daily discharge averaging 125 lbs. per day of total organic carbon. The goal is to remain continuously below the permit level in long-term operation. Currently, discharge levels are averaging between 5 and 15 lbs. per day. Thanks to process automation and aggressive treatment, many materials are recycled or reused in the production process, particularly water. The volume of treated water effluent has been reduced to 80,000 gal./day, down from 1 million gal./day in older dyestuff plants - a reduction of more than 90%.

  4. Production improvements plug water effluent by 90 percent

    International Nuclear Information System (INIS)

    Wett, T.

    1993-01-01

    Ciba-Geigy Corp. is a wholly owned subsidary of Ciba-Geigy Ltd., a publicly owned company headquartered in Basel, Switzerland. The subsidary's St. Gabriel, LA, production site contains operations of the Agricultural and Textile Products divisions. The latter division has been involved in the dyestuff industry for more than 200 years. In late 1991, dyestuff production was initiated in the St. Gabriel Delta manufacturing facility. Here, a series of environmentally sound products - dyes for use in nylon carpeting, automotive products, towels, paper napkins, and cotton sportswear and other fabrics - are made using only water-soluble materials. Ciba Corp. actively participates in the Chemical Manufacturers Association's Responsible Care reg-sign Initiative. In practice, the company strives to actively reflect the goals of the initiative for continuous improvement in environmental performance. Under its operating permit, the Delta plant is permitted a daily discharge averaging 125 lbs. per day of total organic carbon. The goal is to remain continuously below the permit level in long-term operation. Currently, discharge levels are averaging between 5 and 15 lbs. per day. Thanks to process automation and aggressive treatment, many materials are recycled or reused in the production process, particularly water. The volume of treated water effluent has been reduced to 80,000 gal./day, down from 1 million gal./day in older dyestuff plants - a reduction of more than 90%

  5. Productivity Sharing Programs: Can They Contribute to Productivity Improvement?

    Science.gov (United States)

    General Accounting Office, Washington, DC.

    Productivity sharing plans were studied to determine how they operate, what benefits result, and whether long-term increases in productivity can be realized through the program. Thirty-six firms were interviewed that had productivity sharing plans. Nine firms that had either rejected adoption of a productivity sharing plan or were still…

  6. Learning and improvement in product innovation processes: Enabling behaviors

    NARCIS (Netherlands)

    Gieskes, J.F.B.; Langenberg, Ilse

    2001-01-01

    Product Innovation is described as a continuous and cross-functional process involving all stages in the product life cycle. This approach gives way to study product innovation processes from a continuous improvement and learning viewpoint. The Continuous Improvement in the global product MAnagement

  7. MOLTEN CARBONATE FUEL CELL PRODUCT DESIGN IMPROVEMENT

    Energy Technology Data Exchange (ETDEWEB)

    H.C. Maru; M. Farooque

    2005-03-01

    waste water treatment gas, DFC power plants are ready today and do not require the creation of a hydrogen infrastructure. Product improvement progress made during the program period in the areas of technology, manufacturing processes, cost reduction and balance-of-plant equipment designs is discussed in this report.

  8. Improving the quotation process with product configuration

    DEFF Research Database (Denmark)

    Hvam, Lars; Christensen, Simon Pape

    2006-01-01

    How can product configuration support the process of engineering highly complex industrial products? This article describes how an IT-based product configuration system was developed to support the process of mak-ing budget quotations. The article is based on a research project carried out...

  9. Agricultural Productivity Forecasts for Improved Drought Monitoring

    Science.gov (United States)

    Limaye, Ashutosh; McNider, Richard; Moss, Donald; Alhamdan, Mohammad

    2010-01-01

    Water stresses on agricultural crops during critical phases of crop phenology (such as grain filling) has higher impact on the eventual yield than at other times of crop growth. Therefore farmers are more concerned about water stresses in the context of crop phenology than the meteorological droughts. However the drought estimates currently produced do not account for the crop phenology. US Department of Agriculture (USDA) and National Oceanic and Atmospheric Administration (NOAA) have developed a drought monitoring decision support tool: The U.S. Drought Monitor, which currently uses meteorological droughts to delineate and categorize drought severity. Output from the Drought Monitor is used by the States to make disaster declarations. More importantly, USDA uses the Drought Monitor to make estimates of crop yield to help the commodities market. Accurate estimation of corn yield is especially critical given the recent trend towards diversion of corn to produce ethanol. Ethanol is fast becoming a standard 10% ethanol additive to petroleum products, the largest traded commodity. Thus the impact of large-scale drought will have dramatic impact on the petroleum prices as well as on food prices. USDA's World Agricultural Outlook Board (WAOB) serves as a focal point for economic intelligence and the commodity outlook for U.S. WAOB depends on Drought Monitor and has emphatically stated that accurate and timely data are needed in operational agrometeorological services to generate reliable projections for agricultural decision makers. Thus, improvements in the prediction of drought will reflect in early and accurate assessment of crop yields, which in turn will improve commodity projections. We have developed a drought assessment tool, which accounts for the water stress in the context of crop phenology. The crop modeling component is done using various crop modules within Decision Support System for Agrotechnology Transfer (DSSAT). DSSAT is an agricultural crop

  10. Publishing activities improves undergraduate biology education.

    Science.gov (United States)

    Smith, Michelle K

    2018-06-01

    To improve undergraduate biology education, there is an urgent need for biology instructors to publish their innovative active-learning instructional materials in peer-reviewed journals. To do this, instructors can measure student knowledge about a variety of biology concepts, iteratively design activities, explore student learning outcomes and publish the results. Creating a set of well-vetted activities, searchable through a journal interface, saves other instructors time and encourages the use of active-learning instructional practices. For authors, these publications offer new opportunities to collaborate and can provide evidence of a commitment to using active-learning instructional techniques in the classroom.

  11. Improving Quality of Seal Leak Test Product using Six Sigma

    Science.gov (United States)

    Luthfi Malik, Abdullah; Akbar, Muhammad; Irianto, Dradjad

    2016-02-01

    Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure.

  12. Improving Quality of Seal Leak Test Product using Six Sigma

    International Nuclear Information System (INIS)

    Malik, Abdullah Luthfi; Akbar, Muhammad; Irianto, Dradjad

    2016-01-01

    Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure. (paper)

  13. Improvement of succinate production by release of end-product inhibition in Corynebacterium glutamicum.

    Science.gov (United States)

    Chung, Soon-Chun; Park, Joon-Song; Yun, Jiae; Park, Jin Hwan

    2017-03-01

    Succinate is a renewable-based platform chemical that may be used to produce a wide range of chemicals including 1,4-butanediol, tetrahydrofurane, and γ-butyrolactone. However, industrial fermentation of organic acids is often subject to end-product inhibition, which significantly retards cell growth and limits metabolic activities and final productivity. In this study, we report the development of metabolically engineered Corynebacterium glutamicum for high production of succinate by release of end-product inhibition coupled with an increase of key metabolic flux. It was found that the rates of glucose consumption and succinate production were significantly reduced by extracellular succinate in an engineered strain, S003. To understand the mechanism underlying the inhibition by succinate, comparative transcriptome analysis was performed. Among the downregulated genes, overexpression of the NCgl0275 gene was found to suppress the inhibition of glucose consumption and succinate production, resulting in a 37.7% increase in succinate production up to 55.4g/L in fed-batch fermentation. Further improvement was achieved by increasing the metabolic flux from PEP to OAA. The final engineered strain was able to produce 152.2g/L succinate, the highest production reported to date, with a yield of 1.1g/g glucose under anaerobic condition. These results suggest that the release of end-product inhibition coupled with an increase in key metabolic flux is a promising strategy for enhancing production of succinate. Copyright © 2017. Published by Elsevier Inc.

  14. Activating clinical trials: a process improvement approach.

    Science.gov (United States)

    Martinez, Diego A; Tsalatsanis, Athanasios; Yalcin, Ali; Zayas-Castro, José L; Djulbegovic, Benjamin

    2016-02-24

    The administrative process associated with clinical trial activation has been criticized as costly, complex, and time-consuming. Prior research has concentrated on identifying administrative barriers and proposing various solutions to reduce activation time, and consequently associated costs. Here, we expand on previous research by incorporating social network analysis and discrete-event simulation to support process improvement decision-making. We searched for all operational data associated with the administrative process of activating industry-sponsored clinical trials at the Office of Clinical Research of the University of South Florida in Tampa, Florida. We limited the search to those trials initiated and activated between July 2011 and June 2012. We described the process using value stream mapping, studied the interactions of the various process participants using social network analysis, and modeled potential process modifications using discrete-event simulation. The administrative process comprised 5 sub-processes, 30 activities, 11 decision points, 5 loops, and 8 participants. The mean activation time was 76.6 days. Rate-limiting sub-processes were those of contract and budget development. Key participants during contract and budget development were the Office of Clinical Research, sponsors, and the principal investigator. Simulation results indicate that slight increments on the number of trials, arriving to the Office of Clinical Research, would increase activation time by 11 %. Also, incrementing the efficiency of contract and budget development would reduce the activation time by 28 %. Finally, better synchronization between contract and budget development would reduce time spent on batching documentation; however, no improvements would be attained in total activation time. The presented process improvement analytic framework not only identifies administrative barriers, but also helps to devise and evaluate potential improvement scenarios. The strength

  15. Application of the suggestion system in the improvement of the production process and product quality control

    Science.gov (United States)

    Gołaś, H.; Mazur, A.; Gruszka, J.; Szafer, P.

    2016-08-01

    The elaboration is a case study and the research was carried out in the company Alco-Mot Ltd., which employs 120 people. The company specializes in the production of lead poles for industrial and traction batteries using gravity casting. The elements embedded in the cast are manufactured on a machining centre, which provides the stability of the process and of the dimensions of the product as well as a very short production time. As a result of observation and analysis the authors have developed a concept for the implementation of a dynamic suggestion system in ALCO-MOT, including, among others, a standard for actions in the implementation of the suggestion system, as well as clear guidelines for the processing and presentation of the activities undertaken in the time between the establishment of the concept (suggestions) and the benefits analysis after the proposed solutions have been implemented. The authors also present how suggestions proposed by ALCO-MOT staff contributed to the improvement of the processes of production and quality control. Employees offered more than 30 suggestions, of which more than a half are being implemented now and further actions are being prepared for implementation. The authors will present the results of improvements in, for example, tool replacement time, scrap reduction. The authors will present how kaizen can improve the production and quality control processes. They will present how the production and quality control processes looked before and after the implementation of employee suggestions.

  16. Improving radiation use efficiency in greenhouse production systems

    OpenAIRE

    Li, Tao

    2015-01-01

    SUMMARY A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve crop production. Hence agricultural production efficiency needs to increase. Greenhouses provide the possibility to create optimal growth conditions for crops, thereby improving production and product quality. Light is the dr...

  17. Scaling production and improving efficiency in DEA: an interactive approach

    Science.gov (United States)

    Rödder, Wilhelm; Kleine, Andreas; Dellnitz, Andreas

    2017-10-01

    DEA models help a DMU to detect its (in-)efficiency and to improve activities, if necessary. Efficiency is only one economic aim for a decision-maker; however, up- or downsizing might be a second one. Improving efficiency is the main topic in DEA; the long-term strategy towards the right production size should attract our attention as well. Not always the management of a DMU primarily focuses on technical efficiency but rather is interested in gaining scale effects. In this paper, a formula for returns to scale (RTS) is developed, and this formula is even applicable for interior points of technology. Particularly, technical and scale inefficient DMUs need sophisticated instruments to improve their situation. Considering RTS as well as efficiency, in this paper, we give an advice for each DMU to find an economically reliable path from its actual situation to better activities and finally to most productive scale size (mpss), perhaps. For realizing this path, we propose an interactive algorithm, thus harmonizing the scientific findings and the interests of the management. Small numerical examples illustrate such paths for selected DMUs; an empirical application in theatre management completes the contribution.

  18. [Increase of physical activity by improvement of the nutritional status].

    Science.gov (United States)

    Torún, B

    1989-09-01

    Physical activity is affected by nutritional modifications and, in turn, influences growth, cognition, social behavior, work performance and other functions. Studies in preschool children showed that: 1. A decrease in energy intake during four to seven days reduced the time allocated to energy-demanding activities and increased sedentary activities. 2. Children with mild weight deficit were more sedentary than well-nourished counterparts. 3. Children became more active when nutritional status improved. 4. A 10% reduction in energy intake reduced total energy expenditure by 15% without affecting weight gain nor basal metabolism. Studies of men working in non-mechanized agriculture showed that: 1. Dietary improvements led to faster salaried work, reduction of napping time and greater physical activity after work. 2. An increase in energy intake increased total daily energy expenditure, tending to maintain energy balance and relatively stable body weight within the cyclic variations of the agricultural year. 3. Food supplementation did not necessarily improve productivity. Other labor incentives without dietary improvements increased energy expenditure during working hours, which resulted in weight loss. In conclusion, good health and nutrition provide the biological basis for adequate physical activity that may improve cognitive development, social interactions, economic productivity and the quality of life of an individual or a population, but other incentives are required for the optimal expression of that biologic potential.

  19. Production of Genetically Improved Organic Nile Tilapia

    NARCIS (Netherlands)

    Charo, H.; Komen, J.; Bovenhuis, H.; Rezk, M.A.; Ponzoni, R.W.

    2008-01-01

    Demand for organic products for human consumption has been on the increase due to the belief that organic products are safer and healthier to the consumer and the environment. In developing countries, Nile tilapia (Oreochromis niloticus) is usually grown in low-input organically fed ponds with

  20. Biomass productivity improvement for eastern cottonwood

    Science.gov (United States)

    Terry L. Robison; Randy J. Rousseau; Jianwei Zhang

    2006-01-01

    Eastern cottonwood ( Populus deltoides Marsh.) is grown in plantations by MeadWestvaco for use at its Wickliffe Kentucky Fine Papers Mill1. Genetic and productivity research over the past two decades have led to significant increases in biomass yield while reducing production costs.Initially, genetic research identified fast growing...

  1. Productivity improvement using discrete events simulation

    Science.gov (United States)

    Hazza, M. H. F. Al; Elbishari, E. M. Y.; Ismail, M. Y. Bin; Adesta, E. Y. T.; Rahman, Nur Salihah Binti Abdul

    2018-01-01

    The increasing in complexity of the manufacturing systems has increased the cost of investment in many industries. Furthermore, the theoretical feasibility studies are not enough to take the decision in investing for that particular area. Therefore, the development of the new advanced software is protecting the manufacturer from investing money in production lines that may not be sufficient and effective with their requirement in terms of machine utilization and productivity issue. By conducting a simulation, using accurate model will reduce and eliminate the risk associated with their new investment. The aim of this research is to prove and highlight the importance of simulation in decision-making process. Delmia quest software was used as a simulation program to run a simulation for the production line. A simulation was first done for the existing production line and show that the estimated production rate is 261 units/day. The results have been analysed based on utilization percentage and idle time. Two different scenarios have been proposed based on different objectives. The first scenario is by focusing on low utilization machines and their idle time, this was resulted in minimizing the number of machines used by three with the addition of the works who maintain them without having an effect on the production rate. The second scenario is to increase the production rate by upgrading the curing machine which lead to the increase in the daily productivity by 7% from 261 units to 281 units.

  2. Improving productivity through more effective time management.

    Science.gov (United States)

    Arnold, Edwin; Pulich, Marcia

    2004-01-01

    Effective time management has become increasingly important for managers as they seek to accomplish objectives in today's organizations, which have been restructured for efficiency while employing fewer people. Managers can improve their ability to manage time effectively by examining their attitudes toward time, analyzing time-wasting behaviors, and developing better time management skills. Managers can improve their performance and promotion potential with more effective time utilization. Strategies for improving time management skills are presented.

  3. Rectal Cancer Survivors' Participation in Productive Activities.

    Science.gov (United States)

    Hornbrook, Mark C; Grant, Marcia; Wendel, Christopher; Bulkley, Joanna E; Mcmullen, Carmit K; Altschuler, Andrea; Temple, Larissa Kf; Herrinton, Lisa J; Krouse, Robert S

    2017-01-01

    Rectal cancer and its treatment impair survivors' productivity. To assess determinants of market and nonmarket employment, job search, volunteering, and homemaking among survivors five years or longer after diagnosis. We mailed questionnaires to 1063 survivors who were members of Kaiser Permanente (Northern California, Northwest) during 2010 and 2011. Productive activities, functional health status, and bowel management at the time of the survey. Response rate was 60.5% (577/953). Higher comorbidity burdens were associated with lower productivity for men and women rectal cancer survivors. Productive survivors were younger and had lower disease stage and age at diagnosis, higher household income and educational attainment, and fewer comorbidity burdens and workplace adjustments than did nonproductive survivors (p < 0.05 each; 2-sided). Productive rectal cancer survivors were evenly split by sex. Staying productive is associated with better mental health for rectal cancer survivors. Rectal cancer survivors with multiple chronic conditions, higher disease stage, lower productive activities, and older age need better access to medical care and closer monitoring of the quality of their care, including self-care. To capture the full extent of the involvement of survivors in all types of productive activities, research should routinely include measures of employment, searching for employment, homemaking, and volunteering. Counting market and nonmarket productive activities is innovative and recognizes the continuum of contributions survivors make to families and society. Health care systems should routinely monitor rectal cancer survivors' medical care access, comorbidities, health-related quality of life, and productive activities.

  4. Software Engineering Improvement Activities/Plan

    Science.gov (United States)

    2003-01-01

    bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

  5. Composition and methods for improved fuel production

    Science.gov (United States)

    Steele, Philip H.; Tanneru, Sathishkumar; Gajjela, Sanjeev K.

    2015-12-29

    Certain embodiments of the present invention are configured to produce boiler and transportation fuels. A first phase of the method may include oxidation and/or hyper-acidification of bio-oil to produce an intermediate product. A second phase of the method may include catalytic deoxygenation, esterification, or olefination/esterification of the intermediate product under pressurized syngas. The composition of the resulting product--e.g., a boiler fuel--produced by these methods may be used directly or further upgraded to a transportation fuel. Certain embodiments of the present invention also include catalytic compositions configured for use in the method embodiments.

  6. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence or? the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...

  7. Good air quality in offices improves productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...

  8. Improvement of Biogas Production by Bioaugmentation

    Science.gov (United States)

    Kovács, K. L.; Ács, N.; Kovács, E.; Wirth, R.; Rákhely, G.; Strang, Orsolya; Herbel, Zsófia; Bagi, Z.

    2013-01-01

    Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed. PMID:23484123

  9. Improvements in the production of petrol

    Energy Technology Data Exchange (ETDEWEB)

    Tinker, F

    1918-12-19

    The production of petrol from crude mineral oils by means including a still and a superheating or cracking chamber is described whereby a quantity of vapor is generated for subsequent mixture with the crude oil, mixing the superheated vapor and crude oil in a pipe or chamber so that the process of heat interchange is complete before the final product to be collected is delivered to a fractionating column and the residuum passed into the still.

  10. Product Quality Improvement Using FMEA for Electric Parking Brake (EPB)

    Science.gov (United States)

    Dumitrescu, C. D.; Gruber, G. C.; Tişcă, I. A.

    2016-08-01

    One of the most frequently used methods to improve product quality is complex FMEA. (Failure Modes and Effects Analyses). In the literature various FMEA is known, depending on the mode and depending on the targets; we mention here some of these names: Failure Modes and Effects Analysis Process, or analysis Failure Mode and Effects Reported (FMECA). Whatever option is supported by the work team, the goal of the method is the same: optimize product design activities in research, design processes, implementation of manufacturing processes, optimization of mining product to beneficiaries. According to a market survey conducted on parts suppliers to vehicle manufacturers FMEA method is used in 75%. One purpose of the application is that after the research and product development is considered resolved, any errors which may be detected; another purpose of applying the method is initiating appropriate measures to avoid mistakes. Achieving these two goals leads to a high level distribution in applying, to avoid errors already in the design phase of the product, thereby avoiding the emergence and development of additional costs in later stages of product manufacturing. During application of FMEA method using standardized forms; with their help will establish the initial assemblies of product structure, in which all components will be viewed without error. The work is an application of the method FMEA quality components to optimize the structure of the electrical parking brake (Electric Parching Brake - E.P.B). This is a component attached to the roller system which ensures automotive replacement of conventional mechanical parking brake while ensuring its comfort, functionality, durability and saves space in the passenger compartment. The paper describes the levels at which they appealed in applying FMEA, working arrangements in the 4 distinct levels of analysis, and how to determine the number of risk (Risk Priority Number); the analysis of risk factors and established

  11. Improving Water Use in Fodder Production

    Directory of Open Access Journals (Sweden)

    Vanessa Mendoza-Grimón

    2015-05-01

    Full Text Available Water deficit in semi-arid regions limits the future of the livestock sector. Also, its high price represents a percentage of the total cost of forage production. Non-conventional water resources applied by subsurface drip irrigation (SDI, in which the safe use lies in the management and not on the level of water treatment, would enhance the ruminant production sustainability. To obtain the optimal benefit, the transformation of water per kilogram of dry matter produced must have a high grade of effectiveness. Under this premise, a maralfalfa crop (Penissetum sp, hybridum has been established with an SDI system and reclaimed water. Forage yield is analyzed with respect to a 40% irrigation reduction. This study shows that, with the use of these good irrigation management practices, it is possible to harvest an annual production of 90 to 72 t·ha−1 in the warmer regions of the Canary Islands. This implies water consumption between 13,200 and 8100 m3·ha−1. A water consumption of 21,000 m3·ha−1 per year for the same production, at a ratio of 230 L·t−1, can be estimated for the rest of the Canary Islands coastal regions. The use of the water management described in this paper can be profitable in the Canary Islands for fodder production.

  12. Chimeric enzymes with improved cellulase activities

    Science.gov (United States)

    Xu, Qi; Baker, John O; Himmel, Michael E

    2015-03-31

    Nucleic acid molecules encoding chimeric cellulase polypeptides that exhibit improved cellulase activities are disclosed herein. The chimeric cellulase polypeptides encoded by these nucleic acids and methods to produce the cellulases are also described, along with methods of using chimeric cellulases for the conversion of cellulose to sugars such as glucose.

  13. Acquainting Future Office Employees with Productivity-Improvement Techniques.

    Science.gov (United States)

    Quible, Zane K.

    1982-01-01

    Examines factors affecting productivity (government regulations, energy costs, decline in the work ethic, capital investment, number of service workers, work force characteristics, management practices, and unions), and techniques to improve productivity (employee involvement, job structure, communication, flexitime, employee upgrading, incentive…

  14. Herbal products, food supplements and teas for improvement of digestion

    OpenAIRE

    Mozūraitienė, Vilija

    2016-01-01

    Objective of the study: To examine and systematize assortment of herbal products, food supplements and teas for improvement of digestion and also to find out public opinion about herbal products, food supplements and teas for improvement of digestion using questionnaire. Aim of the study: (1) To examine which digestive tract ailments are treated most frequently herbal products, food supplements and teas. (2) To examine which herbal products, food supplements and teas are used most frequent...

  15. An Alginate/Cyclodextrin Spray Drying Matrix to Improve Shelf Life and Antioxidant Efficiency of a Blood Orange By-Product Extract Rich in Polyphenols: MMPs Inhibition and Antiglycation Activity in Dysmetabolic Diseases

    Directory of Open Access Journals (Sweden)

    Maria Rosaria Lauro

    2017-01-01

    Full Text Available Alginate and β-cyclodextrin were used to produce easily dosable and spray-dried microsystems of a dried blood orange extract with antidysmetabolic properties, obtained from a by-product fluid extract. The spray-dried applied conditions were able to obtain a concentrate dried extract without the loss of AOA and with TPC and TMA values of 35–40% higher than that of the starting material. They were also effective in producing microparticles with 80–100% of encapsulation efficiency. The 2% sodium alginate was capable of improving the extract shelf life, while the beta-cyclodextrin (1 : 1 molar ratio with dried extract prolonged the extract antioxidant efficiency by 6 hours. The good inhibition effect of the dried extract on the AGE formation and the MMP-2 and MMP-9 activity is presumably due to a synergic effect exerted by both anthocyanin and bioflavonoid extract compounds and was improved by the use of alginate and cyclodextrin.

  16. Recent Improvements in IERS Rapid Service/Prediction Center Products

    National Research Council Canada - National Science Library

    Stamatakos, N; Luzum, B; Wooden, W

    2007-01-01

    ...) at USNO has made several improvements to its combination and pre- diction products. These improvements are due to the inclusion of new input data sources as well as modifications to the combination and prediction algorithms...

  17. Improved riboflavin production by Eremothecium ashbyii using ...

    African Journals Online (AJOL)

    A detail research on the control strategies of carbon and nitrogen source was investigated for riboflavin production by Eremothecium ashbyii. The effects of various carbon and nitrogen sources on riboflavin biosynthesis were first employed respectively which revealed that glucose and yeast extract were the optimal medium ...

  18. Improvement of Biogas Production by Bioaugmentation

    Directory of Open Access Journals (Sweden)

    K. L. Kovács

    2013-01-01

    Full Text Available Biogas production technologies commonly involve the use of natural anaerobic consortia of microbes. The objective of this study was to elucidate the importance of hydrogen in this complex microbial food chain. Novel laboratory biogas reactor prototypes were designed and constructed. The fates of pure hydrogen-producing cultures of Caldicellulosiruptor saccharolyticus and Enterobacter cloacae were followed in time in thermophilic and mesophilic natural biogas-producing communities, respectively. Molecular biological techniques were applied to study the altered ecosystems. A systematic study in 5-litre CSTR digesters revealed that a key fermentation parameter in the maintenance of an altered population balance is the loading rate of total organic solids. Intensification of the biogas production was observed and the results corroborate that the enhanced biogas productivity is associated with the increased abundance of the hydrogen producers. Fermentation parameters did not indicate signs of failure in the biogas production process. Rational construction of more efficient and sustainable biogas-producing microbial consortia is proposed.

  19. Improving Marketing's Contribution to New Product Development

    NARCIS (Netherlands)

    Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

    In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of

  20. Improved space bandwidth product in image upconversion

    DEFF Research Database (Denmark)

    Dam, Jeppe Seidelin; Pedersen, Christian; Tidemand-Lichtenberg, Peter

    2012-01-01

    We present a technique increasing the space bandwidth product of a nonlinear image upconversion process used for spectral imaging. The technique exploits the strong dependency of the phase-matching condition in sum frequency generation (SFG) on the angle of propagation of the interacting fields...

  1. Implementing quality/productivity improvement initiatives in an engineering environment

    Science.gov (United States)

    Ruda, R. R.

    1985-01-01

    Quality/Productivity Improvement (QPI) initiatives in the engineering environment at McDonnell Douglas-Houston include several different, distinct activities, each having its own application, yet all targeted toward one common goal - making continuous improvement a way of life. The chief executive and the next two levels of management demonstrate their commitment to QPI with hands-on involvement in several activities. Each is a member of a QPI Council which consists of six panels - Participative Management, Communications, Training, Performance/Productivity, Human Resources Management and Strategic Management. In addition, each manager conducts Workplace Visits and Bosstalks, to enhance communications with employees and to provide a forum for the identification of problems - both real and perceived. Quality Circles and Project Teams are well established within McConnel Douglas as useful and desirable employee involvement teams. The continued growth of voluntary membership in the circles program is strong evidence of the employee interest and management support that have developed within the organization.

  2. Space Shuttle main engine product improvement

    Science.gov (United States)

    Lucci, A. D.; Klatt, F. P.

    1985-01-01

    The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

  3. Improving Buffalo Milk Production to Sustain the Production of Dadih by Small Farmers in West Sumatera

    Directory of Open Access Journals (Sweden)

    Wirdahayati R B

    2007-12-01

    Full Text Available The swamp buffalo which is found in many Asian regions is mainly raised for meat and draft purposes. However, in West Sumatera, it is also milked and the milk is mostly consumed as “dadih“, a well known traditional product from this area. Dadih is actually a product made from fresh buffalo milk, which is kept in bamboo tube for about 2-3 days under room temperature, without any application or addition of bacteria starter although the end product of this fermentation contains various bacteria, mould and khamir. As the natural fermented milk product, dadih is white in colour and the curd texture like tofu, tastes like yoghurt, and it is generally served as a complementing meal in some traditional occasion as well as delicacy from West Sumatera. Dadih is highly nutritive product, protein and fat contents are higher than those of yoghurt, rich in amino acids and bacteria such as Lactobacillus sp. and low in cholesterol. The raw material for dadih is limited due to the low productivity of fresh buffalo milk which is generally collected for about 0.5 – 2.0 litres/head/day. The effort in sustaining “dadih product“ is directed to the improving the management of the buffalo condition particularly those in lactating period. Feeding improvement is recommended in order to provide an adequate milk for raising its calf and to be milked for making dadih and to support the optimal reproductive activity of the buffalo dam. In future, the assessment on “dadih“ should also include the packaging improvement which can improve and prolong the storage time for the benefit of marketing purposes.

  4. WORK SIMPLIFICATION FOR PRODUCTIVITY IMPROVEMENT A ...

    African Journals Online (AJOL)

    Mechanical Engineering Department. Addis Ababa University ... press concerning the work simplification techniques state ... encompassing as it does improved labor-management cooperation ... achievement of business aims or a contribution to attaining ..... recommended work methods is done after a 1hrough study and ...

  5. Annunciation - building product team capabilities to support utility operational improvement

    International Nuclear Information System (INIS)

    Doucet, R.; Brown, R.; Trask, D.; Leger, R.; Mitchel, G.; Judd, R.; Davey, E.

    2003-01-01

    The purpose of this paper is to describe an AECL initiative to enhance the capabilities to assist utilities with undertaking annunciation improvement. This initiative was undertaken to complement a recent annunciation product upgrade, and in anticipation of developing commercial opportunities to assist Canadian and foreign utilities with control room annunciation improvement. Utilities are relying more and more on external engineering product and service providers to meet their plant support needs as they reduce in-house staffing to lower ongoing support costs. This evolving commercial environment places new demands on product and service providers, and provides new opportunities for increasing the proportion of product and service provider participation in plant improvement projects. This paper outlines recent AECL experience in the annunciation product area. The paper discusses the rationale for product support capability improvement, discusses the approaches undertaken, describes lessons learned, and outlines a proposed utility support model for assisting with future annunciation improvements. (author)

  6. INTEGRATED COST MODEL FOR IMPROVING THE PRODUCTION IN COMPANIES

    Directory of Open Access Journals (Sweden)

    Zuzana Hajduova

    2014-12-01

    Full Text Available Purpose: All processes in the company play important role in ensuring functional integrated management system. We point out the importance of need for a systematic approach to the use of quantitative, but especially statistical methods for modelling the cost of the improvement activities that are part of an integrated management system. Development of integrated management systems worldwide leads towards building of systematic procedures of implementation maintenance and improvement of all systems according to the requirements of all the sides involved.Methodology: Statistical evaluation of the economic indicators of improvement costs and the need for a systematic approach to their management in terms of integrated management systems have become a key role also in the management of processes in the company Cu Drôt, a.s. The aim of this publication is to highlight the importance of proper implementation of statistical methods in the process of improvement costs management in the integrated management system of current market conditions and document the legitimacy of a systematic approach in the area of monitoring and analysing indicators of improvement with the aim of the efficient process management of company. We provide specific example of the implementation of appropriate statistical methods in the production of copper wire in a company Cu Drôt, a.s. This publication also aims to create a model for the estimation of integrated improvement costs, which through the use of statistical methods in the company Cu Drôt, a.s. is used to support decision-making on improving efficiency.Findings: In the present publication, a method for modelling the improvement process, by an integrated manner, is proposed. It is a method in which the basic attributes of the improvement in quality, safety and environment are considered and synergistically combined in the same improvement project. The work examines the use of sophisticated quantitative, especially

  7. Continuous improvement in teams : The (mis)fit between improvement and operational activities of improvement teams

    NARCIS (Netherlands)

    Ros, D.J.

    1999-01-01

    Since the 1970s and 1980s, increasing attention has been paid to the Japanese ways of organising production. One of the subjects often discussed is the importance of continuous incremental improvements. Nowadays, for many organisations, continuous improvement has become an important topic; many

  8. Improving energy productivity in paddy production through benchmarking-An application of data envelopment analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, Narvendra Singh [Department of Agronomy, Uttar Banga Krishi Viswavidyalaya, P.O. Pundibari, District Cooch Behar (West Bengal) 736 165 (India)]. E-mail: nsc_01@rediffmail.com; Mohapatra, Pratap K.J. [Department of Industrial Engineering and Management, Indian Institute of Technology, Kharagpur (West Bengal) 721 302 (India); Pandey, Keshaw Prasad [Department of Agricultural and Food Engineering, Indian Institute of Technology, Kharagpur (West Bengal) 721 302 (India)

    2006-06-15

    In this study, a data envelopment analysis approach has been used to determine the efficiencies of farmers with regard to energy use in rice production activities in the alluvial zone in the state of West Bengal in India. The study has helped to segregate efficient farmers from inefficient ones, identify wasteful uses of energy from different sources by inefficient farmers and to suggest reasonable savings in energy uses from different sources. The methods of cross efficiency matrix and distribution of virtual inputs are used to get insights into the performance of individual farmers, rank efficient farmers and identify the improved operating practices followed by a group of truly efficient farmers. The results reveal that, on an average, about 11.6% of the total input energy could be saved if the farmers follow the input package recommended by the study. The study also suggests that better use of power tillers and introduction of improved machinery would improve the efficiency of energy use and thereby improve the energy productivity of the rice production system in the zone.

  9. Improving energy productivity in paddy production through benchmarking-An application of data envelopment analysis

    International Nuclear Information System (INIS)

    Chauhan, Narvendra Singh; Mohapatra, Pratap K.J.; Pandey, Keshaw Prasad

    2006-01-01

    In this study, a data envelopment analysis approach has been used to determine the efficiencies of farmers with regard to energy use in rice production activities in the alluvial zone in the state of West Bengal in India. The study has helped to segregate efficient farmers from inefficient ones, identify wasteful uses of energy from different sources by inefficient farmers and to suggest reasonable savings in energy uses from different sources. The methods of cross efficiency matrix and distribution of virtual inputs are used to get insights into the performance of individual farmers, rank efficient farmers and identify the improved operating practices followed by a group of truly efficient farmers. The results reveal that, on an average, about 11.6% of the total input energy could be saved if the farmers follow the input package recommended by the study. The study also suggests that better use of power tillers and introduction of improved machinery would improve the efficiency of energy use and thereby improve the energy productivity of the rice production system in the zone

  10. Improvement of meat production capacity in reindeer farming

    Directory of Open Access Journals (Sweden)

    C. J. Petersson

    1990-09-01

    Full Text Available The poster describes the main activities in a joint Swedish-Norwegian research project. The ultimate purpose is to develope tools for individual production control and flock management in domestic reindeer production.

  11. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Hassler, Morris E.

    2005-01-01

    The Y-12 National Security Complex (Y-12) supplies uranium metal and uranium oxide feed material for fabrication into fuel for research reactors around the world. Over the past few years, Y-12 has continued to improve its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear nonproliferation by using LEU rather than HEU, and helping to disposition former U.S. weapons material. It is clearly understood that the research reactor community must keep fuel costs as low as possible and Y-12 is making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. These production cost reductions allows for the U.S. to keep the LEU product price low even with the dramatic increase in the uranium enrichment and feed component market prices in the last few years. This paper will discuss a new standard specification that has been proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product and eliminates two steps of the production process. This new product is expected to decrease fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  12. Candidate genes for drought tolerance and improved productivity in ...

    Indian Academy of Sciences (India)

    Madhu

    tropics. Improving drought tolerance and productivity is one of the most difficult tasks for cereal breeders. The diffi- culty arises from the diverse strategies adopted by plants themselves to combat drought stress depending on the timing,. Candidate genes for drought tolerance and improved productivity in rice (Oryza sativa L.).

  13. Status of Agricultural Production and Crop Variety Improvement in Thailand

    Institute of Scientific and Technical Information of China (English)

    JIAO Chun-hai; GUO Ying; YAO Ming-hua; WAN Zheng-huang

    2012-01-01

    We introduced basic conditions of agricultural production in Thailand, and variety improvement of major crops, including rice, cassava, rubber, and vegetable, in the hope of providing reference for agricultural production and crop variety improvement in Hubei Province and even in the whole country.

  14. Improved fermentative alcohol production. [Patent application

    Science.gov (United States)

    Wilke, C.R.; Maiorella, B.L.; Blanch, H.W.; Cysewski, G.R.

    1980-11-26

    An improved fermentation process is described for producing alcohol which includes the combination of vacuum fermentation and vacuum distillation. Preferably, the vacuum distillation is carried out in two phases, one a fermentor proper operated at atmospheric pressure and a flash phase operated at reduced pressure with recycle of fermentation brew having a reduced alcohol content to the fermentor, using vapor recompression heating of the flash-pot recycle stream to heat the flash-pot or the distillation step, and using water load balancing (i.e., the molar ratio of water in the fermentor feed is the same as the molar ratio of water in the distillation overhead).

  15. Improving production control within the automotive industry

    Energy Technology Data Exchange (ETDEWEB)

    Simon, R L

    1982-01-01

    The problems of controlling and minimising design and manufacturing information within the automotive industry are both costly and do not make maximum use of previous experience. With the advent of CAD/CAM, many new techniques have evolved for the speedy construction of design and manufacturing data bases. A means of binding together these data bases and controlling the design and process planning information is now presented in the form of Computervision's Migraphics and Miplan software. This gives a data retrieval capability from all area's of the production cycle including design and detail, numerical control and robotics, process planning, manufacture and procurement. Together with its numerous analytical capabilities this sorftware provides an excellent tool for the optimisation of manufacturing techniques, thus providing a complete CAD/CAM system from a single data base.

  16. Production of activated carbon from TCR char

    Science.gov (United States)

    Stenzel, Fabian; Heberlein, Markus; Klinner, Tobias; Hornung, Andreas

    2016-04-01

    The utilization of char for adsorptive purposes is known since the 18th century. At that time the char was made of wood or bones and used for decoloration of fluids. In the 20th century the production of activated carbon in an industrial scale was started. The today's raw materials for activated carbon production are hard coal, peat, wood or coconut shells. All these materials entail costs especially the latter. Thus, the utilization of carbon rich residues (biomass) is an interesting economic opportunity because it is available for no costs or even can create income. The char is produced by thermo-catalytic reforming (TCR®). This process is a combination of an intermediate pyrolysis and subsequently a reforming step. During the pyrolysis step the material is decomposed in a vapor and a solid carbon enriched phase. In the second step the vapor and the solid phase get in an intensive contact and the quality of both materials is improved via the reforming process. Subsequently, the condensables are precipitated from the vapor phase and a permanent gas as well as oil is obtained. Both are suitable for heat and power production which is a clear advantage of the TCR® process. The obtained biochar from the TCR® process has special properties. This material has a very low hydrogen and oxygen content. Its stability is comparable to hard coal or anthracite. Therefore it consists almost only of carbon and ash. The latter depends from input material. Furthermore the surface structure and area can be influenced during the reforming step. Depending from temperature and residence time the number of micro pores and the surface area can be increased. Preliminary investigations with methylene blue solution have shown that a TCR® char made of digestate from anaerobic digestion has adsorptive properties. The decoloration of the solution was achieved. A further influencing factor of the adsorption performance is the particle size. Based on the results of the preliminary tests a

  17. JAERI's activities on photon production data

    International Nuclear Information System (INIS)

    Shibata, Keiichi; Maekawa, Fujio; Niita, Koji

    1996-01-01

    Summarized are activities on photon production data at JAERI. The activities consists of evaluation of photon production data for JENDL Fusion File, benchmark tests of JENDL and FENDL-1 data, and calculation of photon production data in the framework of the Quantum Molecular Dynamics. The capture cross sections of 12 C and 16 O were evaluated for JENDL Fusion File by taking account of the direct radiative capture calculations obtained by A. Mengoni (ENEA). The presently evaluated data are in good agreement with the measurements of Igashira et al. in the keV region, describing the behaviour of p-wave capture which is in proportion to υ. Photon production data on Fe and Ni were updated for JENDL Fusion File by using a statistical-model calculations. According to the results of benchmark tests, the calculations with the updated data reproduce the integral measurements on gamma-ray heating. Benchmark tests of evaluated photon production data have been continued by analyzing the integral experimental performed at OKTAVIAN and FNS. The calculations with JENDL Fusion File are in good agreement with the integral measurements. Preliminary calculation of photon production data in the high energy region has been done in the framework of the Quantum Molecular Dynamics approach. The quasi-deuteron model was used to describe photon absorption in the low energy region. Above pion production threshold, pion production channels were included in the calculation. The neutron-proton bremsstrahlung obtained with the one-boson-exchange model was incorporated into QMD codes. (Abstract only)

  18. Optimization and Improvement of Test Processes on a Production Line

    Science.gov (United States)

    Sujová, Erika; Čierna, Helena

    2018-06-01

    The paper deals with increasing processes efficiency at a production line of cylinder heads of engines in a production company operating in the automotive industry. The goal is to achieve improvement and optimization of test processes on a production line. It analyzes options for improving capacity, availability and productivity of processes of an output test by using modern technology available on the market. We have focused on analysis of operation times before and after optimization of test processes at specific production sections. By analyzing measured results we have determined differences in time before and after improvement of the process. We have determined a coefficient of efficiency OEE and by comparing outputs we have confirmed real improvement of the process of the output test of cylinder heads.

  19. Onboard Plasmatron Hydrogen Production for Improved Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Daniel R. Cohn; Leslie Bromberg; Kamal Hadidi

    2005-12-31

    A plasmatron fuel reformer has been developed for onboard hydrogen generation for vehicular applications. These applications include hydrogen addition to spark-ignition internal combustion engines, NOx trap and diesel particulate filter (DPF) regeneration, and emissions reduction from spark ignition internal combustion engines First, a thermal plasmatron fuel reformer was developed. This plasmatron used an electric arc with relatively high power to reform fuels such as gasoline, diesel and biofuels at an oxygen to carbon ratio close to 1. The draw back of this device was that it has a high electric consumption and limited electrode lifetime due to the high temperature electric arc. A second generation plasmatron fuel reformer was developed. It used a low-current high-voltage electric discharge with a completely new electrode continuation. This design uses two cylindrical electrodes with a rotating discharge that produced low temperature volumetric cold plasma., The lifetime of the electrodes was no longer an issue and the device was tested on several fuels such as gasoline, diesel, and biofuels at different flow rates and different oxygen to carbon ratios. Hydrogen concentration and yields were measured for both the thermal and non-thermal plasmatron reformers for homogeneous (non-catalytic) and catalytic reforming of several fuels. The technology was licensed to an industrial auto part supplier (ArvinMeritor) and is being implemented for some of the applications listed above. The Plasmatron reformer has been successfully tested on a bus for NOx trap regeneration. The successful development of the plasmatron reformer and its implementation in commercial applications including transportation will bring several benefits to the nation. These benefits include the reduction of NOx emissions, improving engine efficiency and reducing the nation's oil consumption. The objective of this program has been to develop attractive applications of plasmatron fuel reformer

  20. TIME MANAGEMENT - AN INSTRUMENT TO IMPROVE PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    Johan Nortje

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: TIME is an Important element in any persons life as a plannlng mechanlsm to meaningfully organIse activities, or to ensure that a oroject runs WIth but also as a generator of destructive forces over it is lost. In the process of growth and progress ln a dynamIC everchanging envIronment. tIme not only becomes dearer to management, but also $carcet-, and an era of "time poverty" is experienced by many. A varIety of uncontrollable factors may be the cause of such problems, but a danger eXIsts that those factors over which control may be exercised could be lost within the uncontrol labie ones. The objective of this artIcle on tIme management is then to assist in identIfying those "barriers" which lead to "time pover'ty", how to avoid and prevent tIme wastage and apply methods, and make use of ways to promote the effective use of tIme.

    AFRIKAANSE OPSOMMING: TYD is 'n belangrlke faktor In dIe lewe van dIe mens enersyds dlen dlt as 'n beplannlngsmeganlsme am jOU daaglikse aktiwitelte slnvol te orden of am 'n pro.lek met preS1Sle te laat verloop, maar andersvds kan dlt ook vernietigende kragte genereer lndlen 'n mens daaroor beheer verloor. In die proses van groel en voorultgang In 'n dinamles veranderende omgewlng, raak dIe tyd van bestuur nle aIleen kosbaarder n ie, maarook skaar'ser en 'n era van' tydarmoede' word deur ba i e ervaar·. ' n Verskel denhe 1d van onbehee rbare faktore mag hiervoor verantwoordeilk wees, maar dIe gevaar bestaan dat die mens dle greep op dIe beheerbare faktore mag verloor. Die DOEL met hierdle artlkel oor tydsbestuur IS jU1S om behulpsaam te wees met dIe ldentiflsering van "slaggate" wat tot'tydat-moede" aanlelding gee. hoe am tydverkwlstlng te voorkom of te hanteer en die toepassing van metodes en gebruik van hulpmiddels om effektiewe tydsbestuur te bevorder.

  1. Activation product transport in fusion reactors

    International Nuclear Information System (INIS)

    Klein, A.C.; Vogelsang, W.F.

    1984-01-01

    Activated corrosion and neutron sputtering products will enter the coolant and/or tritium breeding material of fusion reactor power plants and experiments and cause personnel access problems. Radiation levels around plant components due to these products will cause difficulties with maintenance and repair operations throughout the plant. A computer code, RAPTOR, has been developed to determine the transport of these products in fusion reactor coolant/tritium breeding materials. Without special treatment, it is likely that fusion reactor power plant operators could experience dose rates as high as 8 rem per hour around a number of plant components after only a few years of operation. (orig.)

  2. Mechanical Behaviour of Soil Improved by Alkali Activated Binders

    Directory of Open Access Journals (Sweden)

    Enza Vitale

    2017-11-01

    Full Text Available The use of alkali activated binders to improve engineering properties of clayey soils is a novel solution, and an alternative to the widely diffused improvement based on the use of traditional binders such as lime and cement. In the paper the alkaline activation of two fly ashes, by-products of coal combustion thermoelectric power plants, has been presented. These alkali activated binders have been mixed with a clayey soil for evaluating the improvement of its mechanical behaviour. One-dimensional compression tests on raw and treated samples have been performed with reference to the effects induced by type of binder, binder contents and curing time. The experimental evidences at volume scale of the treated samples have been directly linked to the chemo-physical evolution of the binders, investigated over curing time by means of X Ray Diffraction. Test results showed a high reactivity of the alkali activated binders promoting the formation of new mineralogical phases responsible for the mechanical improvement of treated soil. The efficiency of alkali activated binders soil treatment has been highlighted by comparison with mechanical performance induced by Portland cement.

  3. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Parker, Elaine; Hassler, Morris

    2004-01-01

    Full text: The Y-12 National Security Complex supplies uranium metal and uranium oxide feed material that is then fabricated into fuel for research reactors around the world. Over the past two to three years, Y-12 has learned a great deal about its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts that have been declared as surplus. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear non-proliferation by using LEU rather than HEU, and by helping to disposition former weapons material. We clearly understand that our customers want to keep fuel costs as low as possible. We at Y-12 are making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. This paper will discuss the new standard specification that we have proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product that is less expensive to produce. This new product is expected to decrease overall fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  4. Improvement of lipase production from Geotrichum sp. in shaken flasks

    Directory of Open Access Journals (Sweden)

    Maldonadoa Resende Rafael

    2012-01-01

    Full Text Available This work is focused on the study of different variables on inoculum build-up aiming to improve the lipase production by Geotrichum sp. by means a sequential strategy of experimental design. The effects of inoculum size, corn steep liquor concentration, volume of inoculum, pH of medium, age of inoculum and soybean oil concentration on lipase activity were assessed by means of two factorial experimental designs. A maximum lipase activity of 35.20±0.8 U/mL was obtained with a inoculum composed of one circular area of 0.78cm2 containing spores, 50 mL of inoculum volume medium, 12 hours of inoculum age, 15% w/v of corn steep liquor concentration, 1.0%w/v of soybean oil concentration and initial pH 5.0 at 30°C and 150 rpm in flasks. This work showed that an enhancement of lipase activity can be obtained using a sequential statistical factorial approach to define the variables for inoculum build-up.

  5. Improved drainage with active chest tube clearance.

    Science.gov (United States)

    Shiose, Akira; Takaseya, Tohru; Fumoto, Hideyuki; Arakawa, Yoko; Horai, Tetsuya; Boyle, Edward M; Gillinov, A Marc; Fukamachi, Kiyotaka

    2010-05-01

    This study was performed to evaluate the efficacy of a novel chest drainage system. This system employs guide wire-based active chest tube clearance to improve drainage and maintain patency. A 32 Fr chest tube was inserted into pleural cavities of five pigs. On the left, a tube was connected to the chest canister, and on the right, the new system was inserted between the chest tube and chest canister. Acute bleeding was mimicked by periodic infusion of blood. The amount of blood drained from each chest cavity was recorded every 15 min for 2 h. After completion of the procedure, all residual blood and clots in each chest cavity were assessed. The new system remained widely patent, and the amount of drainage achieved with this system (670+/-105 ml) was significantly (P=0.01) higher than that with the standard tube (239+/-131 ml). The amount of retained pleural blood and clots with this system (150+/-107 ml) was significantly (P=0.04) lower than that with the standard tube (571+/-248 ml). In conclusion, a novel chest drainage system with active tube clearance significantly improved drainage without tube manipulations. 2010 Published by European Association for Cardio-Thoracic Surgery. All rights reserved.

  6. Improvement of xanthan gum production in batch culture using ...

    African Journals Online (AJOL)

    Yomi

    2011-12-21

    Dec 21, 2011 ... Fermentation was carried out in 500 ml Erlenmeyer flask with 200 ml of a ... The effect of acetic acid on xanthan production was studied with ... improvement when compared with the control. No .... in a plunging jet reactor.

  7. Candidate genes for drought tolerance and improved productivity in ...

    Indian Academy of Sciences (India)

    Madhu

    Improving drought tolerance and productivity is one of the most difficult tasks for ... Keywords. Candidate gene; mapping population; polymerase chain reaction; single marker analysis. .... ple and the mean value computed. 2.4 Isolation of DNA.

  8. Farmers' adoption of improved vegetable production practices under ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-29

    Dec 29, 2008 ... the annual income of the PFs and NPFs, respectively. ... Key words: Adoption, improved vegetable, production practices, farmers and national fadama ..... so, fixed cost components such as depreciation, insurance, repairs,.

  9. New bean products to improve food security | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-21

    ... Agricultural Research Organisation and the Kenya Agricultural and Livestock Research ... New bean products to improve food security. April 21, 2016. Image ... more lucrative market for smallholder bean farmers, most of whom are women.

  10. Productivity Improvement in Underground Coal Mines - A Case Study

    Directory of Open Access Journals (Sweden)

    Devi Prasad Mishra

    2013-01-01

    Full Text Available Improvement of productivity has become an important goal for today's coal industry in the race to increase price competitiveness. The challenge now lying ahead for the coal industry is to identify areas of waste, meet the market price and maintain a healthy profit. The only way to achieve this is to reduce production costs by improving productivity, efficiency and the effectiveness of the equipment. This paper aims to identify the various factors and problems affecting the productivity of underground coal mines adopting the bord and pillar method of mining and to propose suitable measures for improving them. The various key factors affecting productivity, namely the cycle of operations, manpower deployment, machine efficiency, material handling and management of manpower are discussed. In addition, the problem of side discharge loader (SDL cable handling resulting in the wastage of precious manpower resources and SDL breakdown have also been identified and resolved in this paper.

  11. Innovative applications of technology for nuclear power plant productivity improvements

    International Nuclear Information System (INIS)

    Naser, J. A.

    2012-01-01

    The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

  12. Impact of improved wheat technology adoption on productivity and ...

    African Journals Online (AJOL)

    Wheat (Triticum aestivum L.) is one of the most important cereal crops cultivated in wide range of agro-ecologies in Eastern Africa. However, wheat productivity has remained low. This study was carried out in Ethiopia Aris Zone to determine the level and impact of adoption of improved wheat varieties on wheat productivity ...

  13. Improving agricultural production under water scarcity in Fars province, Iran

    NARCIS (Netherlands)

    Hosseini, M.R.; Haile, A.M.; McClain, M.E.

    2012-01-01

    ABSTRACT Water scarcity is one of the major limiting factor for improving agricultural production in the world, which significantly affects agricultural production and livelihood of millions of people who live in arid and semi-arid regions. This case study presents the analysis of the effectiveness

  14. Use of arbuscular mycorrhiza fungi for improved crop production in ...

    African Journals Online (AJOL)

    Arbuscular mycorrhiza fungi (AMF), endophytic fungi reputed for their ability to enhance P uptake can be used to alleviate P deficiencies and improve crop productivity. Although the technology has been used in developed countries, it has not been applied in crop production systems in Africa to any significant level. This is ...

  15. Improving The Efficiency Of Ammonia Electrolysis For Hydrogen Production

    Science.gov (United States)

    Palaniappan, Ramasamy

    Given the abundance of ammonia in domestic and industrial wastes, ammonia electrolysis is a promising technology for remediation and distributed power generation in a clean and safe manner. Efficiency has been identified as one of the key issues that require improvement in order for the technology to enter the market phase. Therefore, this research was performed with the aim of improving the efficiency of hydrogen production by finding alternative materials for the cathode and electrolyte. 1. In the presence of ammonia the activity for hydrogen evolution reaction (HER) followed the trend Rh>Pt>Ru>Ni. The addition of ammonia resulted in lower rates for HER for Pt, Ru, and Ni, which have been attributed to competition from the ammonia adsorption reaction. 2. The addition of ammonia offers insight into the role of metal-hydrogen underpotential deposition (M-Hupd) on HER kinetics. In addition to offering competition via ammonia adsorption it resulted in fewer and weaker M-Hupd bonds for all metals. This finding substantiates the theory that M-Hupd bonds favor HER on Pt electrocatalyst. However, for Rh results suggest that M-Hupd bond may hinder the HER. In addition, the presence of unpaired valence shell electrons is suggested to provide higher activity for HER in the presence of ammonia. 3. Bimetals PtxM1-x (M = Ir, Ru, Rh, and Ni) offered lower overpotentials for HER compared to the unalloyed metals in the presence of ammonia. The activity of HER in the presence of ammonia follows the trend Pt-Ir>Pt-Rh>Pt-Ru>Pt-Ni. The higher activity of HER is attributed to the synergistic effect of the alloy, where ammonia adsorbs onto the more electropositive alloying metal leaving Pt available for Hupd formation and HER to take place. Additionally, this supports the theory that the presence of a higher number of unpaired electrons favors the HER in the presence of ammonia. 4. Potassium polyacrylate (PAA-K) was successfully used as a substitute for aqueous KOH for ammonia

  16. Leveraging management information in improving call centre productivity

    Directory of Open Access Journals (Sweden)

    Manthisana Mosese

    2016-04-01

    Objectives: This research explored the use of management information and its impact on two fundamental functions namely, improving productivity without compromising the quality of service, in the call centre of a well-known South African fashion retailer, Edcon. Following the implementation of the call centre technology project the research set out to determine how Edcon can transform their call centre to improve productivity and customer service through effective utilisation of their management information. Method: Internal documents and reports were analysed to provide the basis of evaluation between the measures of productivity prior to and post the implementation of a technology project at Edcon’s call centre. Semi-structured in-depth and group interviews were conducted to establish the importance and use of management information in improving productivity and customer service. Results: The results indicated that the availability of management information has indeed contributed to improved efficiency at the Edcon call centre. Although literature claims that there is a correlation between a call centre technology upgrade and improvement in performance, evident in the return on investment being realised within a year or two of implementation, it fell beyond the scope of this study to investigate the return on investment for Edcon’s call centre. Conclusion: Although Edcon has begun realising benefits in improved productivity in their call centre from their available management information, information will continue to play a crucial role in supporting management with informed decisions that will improve the call centre operations. [pdf to follow

  17. A model of strategic product quality and process improvement incentives

    NARCIS (Netherlands)

    Veldman, Jasper; Gaalman, G.

    2013-01-01

    In many production firms it is common practice to financially reward managers for firm performance improvement. The use of financial incentives for improvement has been widely researched in several analytical and empirical studies. Literature has also addressed the strategic effect of incentives, in

  18. Process for improving metal production in steelmaking processes

    Science.gov (United States)

    Pal, Uday B.; Gazula, Gopala K. M.; Hasham, Ali

    1996-01-01

    A process and apparatus for improving metal production in ironmaking and steelmaking processes is disclosed. The use of an inert metallic conductor in the slag containing crucible and the addition of a transition metal oxide to the slag are the disclosed process improvements.

  19. Product focused process improvement in the embedded systems industry

    NARCIS (Netherlands)

    Solingen, van D.M.; Derks, P.; Hirvensalo, J.; Kusters, R.J.; Cowderoy, A.; Heemstra, F.J.; Veenendaal, E.P.W.M.

    1999-01-01

    Software specific problems have been handled in the software community through focusing on the software process, and continuous improvement of that software process. However, the contribution of software process improvement (SPI) to product quality has not been proven yet. The PROFES project

  20. Physical Activity to Improve Erectile Function

    DEFF Research Database (Denmark)

    Gerbild, Helle; Larsen, Camilla Marie; Graugaard, Christian

    2018-01-01

    , and metabolic syndrome. Physical activity (PA) has proved to be a protective factor against erectile problems, and it has been shown to improve erectile function for men affected by vascular ED. This systematic review estimated the levels of PA needed to decrease ED for men with physical inactivity, obesity...... for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, a systematic review was performed of research articles specifically investigating PA as a possible treatment of ED. The review included research on ED from physical inactivity, obesity, hypertension, metabolic syndrome, and/or cardiovascular diseases......Introduction The leading cause of erectile dysfunction (ED) is arterial dysfunction, with cardiovascular disease as the most common comorbidity. Therefore, ED is typically linked to a web of closely interrelated cardiovascular risk factors such as physical inactivity, obesity, hypertension...

  1. Physical Activity to Improve Erectile Function

    DEFF Research Database (Denmark)

    Gerbild, Helle; Larsen, Camilla Marie; Graugaard, Christian

    2018-01-01

    , and metabolic syndrome. Physical activity (PA) has proved to be a protective factor against erectile problems, and it has been shown to improve erectile function for men affected by vascular ED. This systematic review estimated the levels of PA needed to decrease ED for men with physical inactivity, obesity......, hypertension, metabolic syndrome, and/or manifest cardiovascular diseases. Aim To provide recommendations of levels of PA needed to decrease ED for men with physical inactivity, obesity, hypertension, metabolic syndrome, and/or cardiovascular diseases. Methods In accord with the Preferred Reporting Items...... intensity 4 times per week. Overall, weekly exercise of 160 minutes for 6 months contributes to decreasing erectile problems in men with ED caused by physical inactivity, obesity, hypertension, metabolic syndrome, and/or cardiovascular diseases....

  2. Activation product transport in fusion reactors

    International Nuclear Information System (INIS)

    Klein, A.C.

    1983-01-01

    Activated corrosion and neutron sputtering products will enter the coolant and/or tritium breeding material of fusion reactor power plants and experiments and cause personnel access problems. Radiation levels around plant components due to these products will cause difficulties with maintenance and repair operations throughout the plant. Similar problems are experienced around fission reactor systems. The determination of the transport of radioactive corrosion and neutron sputtering products through the system is achieved using the computer code RAPTOR. This code calculates the mass transfer of a number of activation products based on the corrosion and sputtering rates through the system, the deposition and release characteristics of various plant components, the neturon flux spectrum, as well as other plant parameters. RAPTOR assembles a system of first order linear differential equations into a matrix equation based upon the reactor system parameters. Included in the transfer matrix are the deposition and erosion coefficients, and the decay and activation data for the various plant nodes and radioactive isotopes. A source vector supplies the corrosion and neutron sputtering source rates. This matrix equation is then solved using a matrix operator technique to give the specific activity distribution of each radioactive species throughout the plant. Once the amount of mass transfer is determined, the photon transport due to the radioactive corrosion and sputtering product sources can be evaluated, and dose rates around the plant components of interest as a function of time can be determined. This method has been used to estimate the radiation hazards around a number of fusion reactor system designs

  3. Selection of productivity improvement techniques via mathematical modeling

    Directory of Open Access Journals (Sweden)

    Mahassan M. Khater

    2011-07-01

    Full Text Available This paper presents a new mathematical model to select an optimal combination of productivity improvement techniques. The proposed model of this paper considers four-stage cycle productivity and the productivity is assumed to be a linear function of fifty four improvement techniques. The proposed model of this paper is implemented for a real-world case study of manufacturing plant. The resulted problem is formulated as a mixed integer programming which can be solved for optimality using traditional methods. The preliminary results of the implementation of the proposed model of this paper indicate that the productivity can be improved through a change on equipments and it can be easily applied for both manufacturing and service industries.

  4. Improving the quality of pork and pork products (EU project)

    DEFF Research Database (Denmark)

    Christensen, Mette; Grunert, Klaus G.; Bonneau, M.

    2008-01-01

    demands. A large EU-project (Q-PorkChains) funded by EU 6th framework programme was initiated in January 2007. The aim of Q-PorkChains is to improve the quality of pork and its products for the consumer and to develop innovative, integrated and sustainable food production chains with low environmental....... The European Unions self-sufficiency and leading position in the global market for pork and pork products is challenged by a number of non-European countries. Therefore, there is a need for developing innovative, integrated, and sustainable food production chains of high quality pork products matching consumer...... impact. Q-PorkChains is composed of six research modules (consumer and citizen demands, pig production, product development, pork chain management, molecular quality control and knowledge synthesis) and two horizontal modules focusing on implementation of obtained knowledge in pilot and demonstration...

  5. Improvements of soil quality for increased food production in Norway

    Science.gov (United States)

    Øygarden, Lillian; Klakegg, Ove; Børresen, Trond; Krogstad, Tore; Kjersti Uhlen, Anne

    2016-04-01

    Since the 1990ties, agricultural land in use in Norway has diminished and yields per hectare for cereals and forages have stagnated. An expert panel appointed to advice on how to increase Norwegian grain production emphasizes low profitability and poor soil quality as limiting factors. A White Paper from the Norwegian Government, Report No.9 (2011-2012), stated that the main goal for the agricultural sector is to increase food production proportional to the expected increase in population (20 % by 2030) in order to maintain self-sufficiency at the present level. This is the background for the interdisciplinary project AGROPRO "Agronomy for increased food production - Challenges and solutions" (2013 - 2017)" financed by the Norwegian research council. A mail goal is seeking possibilities for improvements in agronomic practices for increased and sustainable food production and to identify drivers and challenges for their implementation. Are the key to higher yields hidden in the soil? The paper present an overview of the research activities in the project and some results of the improvements of soil quality to minimize yield gap in cereal and forage production. Detailed new soil maps provide soil information on field scale of soil quality and the suitability for growing different crops like cereal production or vegetables. The detailed soil information is also beeing used for development and adaptation of the planning tool «Terranimo» to reduce risk of soil compaction.The farmer get available soil information for each field, provide information about the maschinery in use- tractors and equipment, tyres, pressure. The decision tool evaluate when the soil is suitable for tillage, calculate the risk of compaction for dry, moist and wet soil. New research data for compaction on Norwegian clay and silt soil are included. Climate change with wetter conditions gives challenges for growing cereals. The project is testing genetic variation in cereals for tolerance to water

  6. Towards improving construction labor productivity and projects’ performance

    Directory of Open Access Journals (Sweden)

    Mostafa E. Shehata

    2011-12-01

    Full Text Available Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome from the literature is that there is no standard definition of productivity. This study provides a guide for necessary steps required to improve construction labor productivity and consequently, the project performance. It can help improve the overall performance of construction projects through the implementation of the concept of benchmarks. Also, it gives an up to date concept of loss of productivity measurement for construction productivity claims. Two major case studies, from the literature, are presented to show construction labor productivity rates, factors affecting construction labor productivity and how to improve it.

  7. Danish initiatives to improve the safety of meat products

    DEFF Research Database (Denmark)

    Wegener, Henrik Caspar

    2010-01-01

    and Campylobacter, and to a lesser extent Yersinia, Escherichia coli O157 and Listeria. Danish initiatives to improve the safety of meat products have focused on the entire production chain from the farm to the consumer, with a special emphasis on the pre-harvest stage of production. The control of bacterial......During the last two decades the major food safety problems in Denmark, as determined by the number of human patients, has been associated with bacterial infections stemming from meat products and eggs. The bacterial pathogens causing the majority of human infections has been Salmonella...

  8. Improving Labor Productivity and Labor Elasticity at Multiproduct Japanese Cuisine Restaurant Introducing Cell-Production System

    OpenAIRE

    Shimamura , Takeshi; Takenaka , Takeshi; Ohura , Syuichi

    2013-01-01

    Part III: Sustainable Services; International audience; This study examined improvement of labor productivity and elasticity of labor hour on sales of a multiproduct Japanese cuisine restaurant. Conventionally, multiproduct restaurant operations include a line production system in the kitchen. Japanese chefs are assumed to be low-skilled workers with staff members supported by someone. A cell production system is introduced into a Japanese Cuisine restaurant to improve it. Results show that t...

  9. Physical activity improves cognition: possible explanations.

    Science.gov (United States)

    Koščak Tivadar, Blanka

    2017-08-01

    Good cognitive abilities (CA) enable autonomy, improve social inclusion and act preventively. Regular physical activity (PA) reduces the risk of developing Alzheimer's disease (AD) and, at the same time, it reduces the decline of CA and stimulates neurogenesis. So PA in connection with cognitive training, nutrition and social interaction has a positive effect on general CA and the central nervous system, the central executor, memory and attention, and reduces the likelihood of developing dementia. Our objective was to examine which sort and intensity of PA is preferred. We did a review, restricted only to human studies, of transparent scientific articles and sample surveys carried out and published in the period between 2001 and 2016 based on the keywords: age, aging, physical activity, physical abilities, cognitive abilities, memory and Alzheimer's disease. According to results CA and PA interact, as an increasing PA of only 10% reduces the risk of dementia and AD significantly. However, there is a question of appropriate intensity of exercise. Low-intensity aerobic exercise has a positive effect on the visual spatial perception and attention, whereas moderate PA has a positive impact on general CA, working memory and attention, verbal memory and attention and vice versa. While the majority of experts recommends vigorous or moderate exercise, many of them warn that higher intensity requires more attention to PA and less to cognitive processes, particularly in terms of reducing reactions, selective attention and flexibility to tasks. There is also a further question what PA should be like. Although some experts believe that the best combination is aerobic PA and exercises against resistance, it is not entirely clear whether the improvement in CA is a result of cardiac vascular fitness. On the other hand, for most elderly it is more suitable to perform an alternative form (not anaerobic) of PA due to comorbidity and actual fragility. We can conclude that PA has a

  10. Prioritising Investments in Marketing Activities to Improve Business Performance

    DEFF Research Database (Denmark)

    Martensen, Anne; Mouritsen, Jan

    2014-01-01

    The purpose of this study is to prioritise investments in marketing activities based on their effect on business performance (BP). On the basis of the European Foundation for Quality Management (EFQM) model adapted to a marketing context, four generic marketing activities are structured in two...... dimensions: (1) Small m: marketing strategy and marketing implementation and (2) big M: cross-functional coordination and innovation. Big M and small m interact and influence BP similarly. When considering investing in marketing activities to improve financial performance, the first priority is to recruit...... and retain competent employees and the second, to collect, disseminate and act upon market insight in the form of measurement of effectiveness and production of intelligence. These provide resources for the development of a customer-oriented marketing strategy that in turn helps innovation and cross...

  11. Process Improvement: An Application in Special Steel Production Sector

    Directory of Open Access Journals (Sweden)

    Tansu TÜRKAN

    2017-07-01

    Full Text Available Customer requests are increasingly varied with the changing of the living conditions and developing technology. In this point, customers want to be met the demands which are good quality and suitable price quickly. The trend in today’s global competitive environment is to provide high quality, reasonably priced products and respond in the required time to customer demands. In this point, organizations should review their processes continuously and improve them. In this study begin with the general information about concept of process, process management and process improvement techniques. This paper continuous with an application in a steel production company which supplies product to the customers in the automotive industry that working with just in time philosophy. In this study different techniques for process improvement (Kaizen, Cause and Effect Diagram, Poka-Yoke, 8D, Failure Modes and Effects Analysis were used in combination.

  12. Improving market oriented product development in Danish food companies

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    1994-01-01

    One of the factors that has been strongly associated with successful new product development is a profound knwledge of customers' needs and wants as well as the ability to transform this knowledge into specific product characteristics and benefits there is a general agreement on the importance of......-processing companies. Preliminary results show that the companies have improved their market orientation, but also that the change pro has been difficult and time-consuming and improvements rather incremental.......One of the factors that has been strongly associated with successful new product development is a profound knwledge of customers' needs and wants as well as the ability to transform this knowledge into specific product characteristics and benefits there is a general agreement on the importance...

  13. How can we improve the environmental sustainability of poultry production?

    Science.gov (United States)

    Leinonen, Ilkka; Kyriazakis, Ilias

    2016-08-01

    The review presents results of recent life cycle assessment studies aiming to quantify and improve the environmental performance of UK poultry production systems, including broiler meat, egg and turkey meat production. Although poultry production has been found to be relatively environmentally friendly compared with the production of other livestock commodities, it still contributes to environmental impacts, such as global warming, eutrophication and acidification. Amongst different sub-processes, feed production and transport contributes about 70 % to the global warming potential of poultry systems, whereas manure management contributes about 40-60 % to their eutrophication potential and acidification potential, respectively. All these impacts can be reduced by improving the feed efficiency, either by changing the birds through genetic selection or by making the feed more digestible (e.g. by using additives such as enzymes). However, although genetic selection has the potential to reduce the resources needed for broiler production (including feed consumption), the changing need of certain feed ingredients, most notably protein sources as a result of changes in bird requirements may limit the benefits of this strategy. The use of alternative feed ingredients, such as locally grown protein crops and agricultural by-products, as a replacement of South American grown soya, can potentially also lead to improvements in several environmental impact categories, as long as such feeding strategies have no negative effect on bird performance. Other management options, such as improving poultry housing and new strategies for manure management have also the potential to further improve the environmental sustainability of the poultry industries in Europe.

  14. Production of activated carbons from almond shell

    Energy Technology Data Exchange (ETDEWEB)

    Nabais, Joao M. Valente; Laginhas, Carlos Eduardo C.; Carrott, P.J.M.; Ribeiro Carrott, M.M.L. [Evora Univ. (Portugal). Centro de Quimica de Evora

    2011-02-15

    The production of activated carbons from almond shell, using physical activation by CO{sub 2} is reported in this work. The used method has produced activated carbons with apparent BET surface areas and micropore volume as high as 1138 m{sup 2} g{sup -1} and 0.49 cm{sup 3} g{sup -1}, respectively. The activated carbons produced have essentially primary micropores and only a small volume of wider micropores. By FTIR analysis it was possible to identify, in the surface of the activated carbons, several functional groups, namely hydroxyls (free and phenol), ethers, esters, lactones, pyrones and Si-H bonds. By the analysis of the XRD patterns it was possible to calculate the microcrystallites dimensions with height between 1.178 and 1.881 nm and width between 3.106 and 5.917 nm. From the XRD it was also possible to identify the presence of traces of inorganic heteroatoms such as Si, Pb, K, Fe and P. All activated carbons showed basic characteristics with point of zero charge between 9.42 and 10.43. (author)

  15. Improved vanillin production in baker's yeast through in silico design

    DEFF Research Database (Denmark)

    Brochado, Ana Rita; Matos, Cláudia; Møller, Birger L.

    2010-01-01

    Background: Vanillin is one of the most widely used flavouring agents, originally obtained from cured seed pods of the vanilla orchid Vanilla planifolia. Currently vanillin is mostly produced via chemical synthesis. A de novo synthetic pathway for heterologous vanillin production from glucose has...... recently been implemented in baker's yeast, Saccharamyces cerevisiae. In this study we aimed at engineering this vanillin cell factory towards improved productivity and thereby at developing an attractive alternative to chemical synthesis. Results: Expression of a glycosyltransferase from Arabidopsis...

  16. Energy efficiency improvements in ammonia production--perspectives and uncertainties

    International Nuclear Information System (INIS)

    Rafiqul, Islam; Weber, Christoph; Lehmann, Bianca; Voss, Alfred

    2005-01-01

    The paper discusses the energy consumption and energy saving potential for a major energy-intensive product in the chemical industry-ammonia, based on technologies currently in use and possible process improvements. The paper consists of four parts. In the first part, mainly references to various ammonia production technologies are given. Energy consumption, emissions and saving potentials are discussed in the second part. Thereby, the situation in Europe, the US and India is highlighted and various data sources are compared. In the third part of the paper, a novel approach for modeling energy efficiency improvements is described that accounts for uncertainties and unobserved heterogeneity in the production processes. Besides new investments, revamping investments are also included in the modeling and the development of the production stock is accounted for. Finally, in the fourth part, this approach is applied to the modeling of energy efficiency improvements and CO 2 emission reductions in ammonia production. Thereby, considerable improvements in specific energy use and CO 2 emissions are found in the reference scenario, yet under the assumption of high oil and gas prices, a partial switch to coal based technologies is expected which lowers notably the CO 2 efficiency. Introduction of a CO 2 penalty under a certificate trading or other regime is on contrary found to foster energy efficiency and the use of low carbon technologies

  17. CONTRIBUTION TO THE IMPROVEMENT OF PRODUCTS QUALITY IN BAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Aleksandar Marić

    2009-09-01

    Full Text Available Food industry occupies special place in the processing industry, especially when we talk on the manufacturing of bakery products. Variable products quality on the market initiated the authors of this study to make an attempt, using comparative analysis of methods for quality control that are at most applied in bakery plants and other "convenient" methods to indicate the shortcomings and to argue convenience of using of methods that would improve testing of the quality. That approach could create a base for designing of model of quality improvement the baking industry.

  18. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... studies both purely descriptive and studies identifying success and failure factors, but almost no studies of how companies actually undertake improve-ments, which problems they encounter,, and how/whether they overcome these problems. Action research is proposed as a suitable method for studying...

  19. Chrysanthemum cutting productivity and rooting ability are improved by grafting.

    Science.gov (United States)

    Zhang, Jing; Chen, Sumei; Liu, Ruixia; Jiang, Jiafu; Chen, Fadi; Fang, Weimin

    2013-01-01

    Chrysanthemum has been commercially propagated by rooting of cuttings, whereas the quality will decline over multiple collections from a single plant. Therefore, we compared the vigour, rooting ability, and some physiological parameters between cuttings harvested from nongrafted "Jinba" (non-grafted cuttings) with those collected from grafted "Jinba" plants onto Artemisia scoparia as a rootstock (grafted cuttings). The yield, length, node number, stem diameter, fresh weight, and dry weight of the grafted cuttings were superior to the non-grafted cuttings. Also grafted cuttings "Jinba" rooted 1 day earlier, but showing enhanced rooting quality including number, length, diameter, and dry weight of roots, where compared to the non-grafted. The physiological parameters that indicated contents of soluble protein, peroxidase activity, soluble sugar, and starch, ratios of soluble sugar/nitrogen ratio, and carbohydrate/nitrogen (C/N), as well as contents of indole-3-acetic acid (IAA) and abscisic acid (ABA), and IAA/ABA ratio were significantly increased in the grafted cuttings. This suggested their important parts in mediating rooting ability. Results from this study showed that grafting improved productivity and rooting ability related to an altered physiology, which provide a means to meet the increasing demand.

  20. Improving productivity levels: family planning services for factory workers.

    Science.gov (United States)

    Darmokusumo, H V

    1989-10-01

    In May 1984, the Minister of Manpower in Indonesia, the Chairman of the BKKBN, and representatives of the employers' and workers' organizations of Indonesia issued a joint decree pledging that they would work together to enhance the implementation of the family planning program among workers in the organized sector. 1 objective of the decree is to improve workers' productivity and the standard of living of workers and their families by implementing a family planning program. 1 baseline survey and a clinic-based survey in 5 provinces revealed that 90% of women workers are between 21-40, or are of reproductive age, and are sexually active. Only about 50% are practicing family planning; the other 50% are afraid to practice family planning due to potential side effects of various methods. This fear was most often caused by negative rumors spread by unsatisfied family planning clients. Placing materials for family planning promotion such as instructional posters and video programs advertising contraceptive services in the work setting may increase knowledge and help alleviate some of this fear. Other studies of family planning services show that employees prefer female medical doctors or midwives as service providers, employees are willing to pay for services (but can only afford a small fee), and family planning service points should be near employees' work sites.

  1. Assessing customer satisfaction for improving NOAA's climate products and services

    Science.gov (United States)

    Meyers, J. C.; Hawkins, M. D.; Timofeyeva, M. M.

    2009-12-01

    NOAA's National Weather Service (NWS) Climate Services Division (CSD) is developing a comprehensive climate user requirements process with the ultimate goal of producing climate services that meet the needs of NWS climate information users. An important part of this effort includes engaging users through periodical surveys conducted by the Claes Fornell International (CFI) Group using the American Customer Satisfaction Index (ACSI). The CFI Group conducted a Climate Services Satisfaction (CSS) Survey in May of 2009 to measure customer satisfaction with current products and services and to gain insight on areas for improvement. The CSS Survey rates customer satisfaction on a range of NWS climate services data and products, including Climate Prediction Center (CPC) outlooks, drought monitoring, and ENSO monitoring and forecasts, as well as NWS local climate data services. In addition, the survey assesses the users of the products to give the NWS insight into its climate customer base. The survey also addresses specific topics such as NWS forecast category names, probabilistic nature of climate products, and interpretation issues. The survey results identify user requirements for improving existing NWS climate services and introducing new ones. CSD will merge the survey recommendations with available scientific methodologies and operational capabilities to develop requirements for improved climate products and services. An overview of the 2009 survey results will be presented, such as users' satisfaction with the accuracy, reliability, display and functionality of products and services.

  2. Improving food and agricultural production. Thailand. Project findings and recommendations

    International Nuclear Information System (INIS)

    1992-01-01

    This document is the terminal report of a United Nations Development Program project to improve food and agricultural production in Thailand by means of nuclear and related technology. The project resulted in improved mutant material to be made available to plant breeders as well as in reports and recommendations on soil-water-plant management practices and livestock management. An additional benefit has been the specialized training that has been provided to many researchers in the country through the project

  3. Improving food and agricultural production. Thailand. Improving food and agricultural production with nuclear and related technology

    International Nuclear Information System (INIS)

    Vanderdeelen, J.

    1991-01-01

    In the northern and north-eastern regions of Thailand, low agricultural production is due mainly to poor soil conditions and variability in the seasonal rainfall distribution. With respect to the former aspect, phosphorus fertilization is one of the major constraints. The aim of the mission was to provide guidance on the studies addressing the use of naturally occurring rock phosphate deposits or phosphate fertilizer. 9 refs, 3 tabs

  4. Challenges in biobutanol production: How to improve the efficiency?

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L. [Mass and Heat Transfer Process Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland); Ojamo, Heikki [Bioprocess Engineering Laboratory, Department of Process and Environmental Engineering, POB 4300, FI-90014 University of Oulu, Oulu (Finland)

    2011-02-15

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  5. Improving animal health and livestock productivity to reduce poverty.

    Science.gov (United States)

    Pradère, J-P

    2014-12-01

    This study is based on scientific publications, statistics and field observations. It shows the importance of livestock in the economy and in the risk management strategies implemented by poor farming households. A comparison of livestock performance trends with the evolution of rural poverty in developing countries indicates that growth in livestock production alone is not enough to reduce rural poverty. To help reduce poverty, sustainable production should be based on productivity gains. Prerequisites for improving productivity include better public policies, enhanced research and the reduction of animal disease risk. The study draws attention to the economic, social and environmental consequences of inadequate support for animal health and production in the least developed countries, especially those of sub-Saharan Africa.

  6. Challenges in biobutanol production: How to improve the efficiency?

    International Nuclear Information System (INIS)

    Garcia, Veronica; Paekkilae, Johanna; Muurinen, Esa; Keiski, Riitta L.; Ojamo, Heikki

    2011-01-01

    There is an increasing interest in the production of chemicals and fuels from renewable resources due to the continuing price increase of fossil resources, the insecurity of the availability of fossil resources in the future, and additionally environmental concerns and legislations. Biobutanol may be produced by the acetone-butanol-ethanol (ABE) fermentation. This paper reviews the biobutanol production bringing up the problems and challenges to overcome. The aim of the paper is to help in finding opportunities to make the process feasible in the near future. The analysis stresses the idea of improving the efficiency of the fermentation stage by altering the up (pretreatment of the raw material) and downstream (product recovery and purification) processes. The paper also explores the biobutanol production from the biorefinery perspective. Finally the review brings up the important role of research in developing and implementing the production of biobutanol by the ABE fermentation. (author)

  7. Activation product analysis in a mixed sample containing both fission and neutron activation products

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Samuel S.; Clark, Sue B.; Eggemeyer, Tere A.; Finn, Erin C.; Hines, C. Corey; King, Mathew D.; Metz, Lori A.; Morley, Shannon M.; Snow, Mathew S.; Wall, Donald E.; Seiner, Brienne N.

    2017-11-02

    Activation analysis of gold (Au) is used to estimate neutron fluence resulting from a criticality event; however, such analyses are complicated by simultaneous production of other gamma-emitting fission products. Confidence in neutron fluence estimates can be increased by quantifying additional activation products such as platinum (Pt), tantalum (Ta), and tungsten (W). This work describes a radiochemical separation procedure for the determination of these activation products. Anion exchange chromatography is used to separate anionic forms of these metals in a nitric acid matrix; thiourea is used to isolate the Au and Pt fraction, followed by removal of the Ta fraction using hydrogen peroxide. W, which is not retained on the first anion exchange column, is transposed to an HCl/HF matrix to enhance retention on a second anion exchange column and finally eluted using HNO3/HF. Chemical separations result in a reduction in the minimum detectable activity by a factor of 287, 207, 141, and 471 for 182Ta, 187W, 197Pt, and 198Au respectively, with greater than 90% recovery for all elements. These results represent the highest recoveries and lowest minimum detectable activities for 182Ta, 187W, 197Pt, and 198Au from mixed fission-activation product samples to date, enabling considerable refinement in the measurement uncertainties for neutron fluences in highly complex sample matrices.

  8. Production does not improve memory for face-name associations.

    Science.gov (United States)

    Hourihan, Kathleen L; Smith, Alexis R S

    2016-06-01

    Strategies for learning face-name associations are generally difficult and time-consuming. However, research has shown that saying a word aloud improves our memory for that word relative to words from the same set that were read silently. Such production effects have been shown for words, pictures, text material, and even word pairs. Can production improve memory for face-name associations? In Experiment 1, participants studied face-name pairs by reading half of the names aloud and half of the names silently, and were tested with cued recall. In Experiment 2, names were repeated aloud (or silently) for the full trial duration. Neither experiment showed a production effect in cued recall. Bayesian analyses showed positive support for the null effect. One possibility is that participants spontaneously implemented more elaborate encoding strategies that overrode any influence of production. However, a more likely explanation for the null production effect is that only half of each stimulus pair was produced-the name, but not the face. Consistent with this explanation, in Experiment 3 a production effect was not observed in cued recall of word-word pairs in which only the target words were read aloud or silently. Averaged across all 3 experiments, aloud targets were more likely to be recalled than silent targets (though not associated with the correct cue). The production effect in associative memory appears to require both members of a pair to be produced. Surprisingly, production shows little promise as a strategy for improving memory for the names of people we have just met. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  9. Evaluation of pig production practices, constraints and opportunities for improvement in smallholder production systems in Kenya.

    Science.gov (United States)

    Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

    2015-02-01

    This study evaluated pig production practices by smallholder farmers in two distinct production systems geared towards addressing their constraints and prospects for improvement. The production systems evaluated were semi-intensive and extensive and differed in remoteness, market access, resource availability and pig production intensity. Data were collected using structured questionnaires where a total of 102 pig farmers were interviewed. Qualitative and quantitative research methods were employed to define the socioeconomic characteristics of the production systems, understanding the different roles that pigs play, marketing systems and constraints to production. In both systems, regular cash income and insurance against emergencies were ranked as the main reasons for rearing pigs. Marketing of pigs was mainly driven by the type of production operation. Finances, feeds and housing were identified as the major constraints to production. The study provides important parameters and identifies constraints important for consideration in design of sustainable production improvement strategies. Feeding challenges can be improved through understanding the composition and proper utilization of local feed resources. Provision of adequate housing would improve the stocking rates and control mating.

  10. Services Sector Development and Improving Production Network in ASEAN

    OpenAIRE

    Yose Rizal Damuri

    2014-01-01

    While the importance of services sector in creating value added and employment has been recognized, the role of services as providers of major inputs to production sector are often forgotten and overlooked. This paper stresses the importance of services sector in supporting economic activities in general; the role that has become increasingly more critical in the wake of global production network. It argues that development of the services sector is crucial to supporting an economy’s partic...

  11. Land Evaluation for improved Rice Production in Watari Irrigation ...

    African Journals Online (AJOL)

    ... suggested to overcome these limitation and upgrade the suitability of the mapping units for increased rice production are; application of inorganic fertilizer, improve the low levels of nutrients and organic matter contents of the soil in the area and other recommendations include land leveling and conservation measures to ...

  12. Rebalancing Redox to Improve Biobutanol Production by Clostridium tyrobutyricum

    Directory of Open Access Journals (Sweden)

    Chao Ma

    2015-12-01

    Full Text Available Biobutanol is a sustainable green biofuel that can substitute for gasoline. Carbon flux has been redistributed in Clostridium tyrobutyricum via metabolic cell engineering to produce biobutanol. However, the lack of reducing power hampered the further improvement of butanol production. The objective of this study was to improve butanol production by rebalancing redox. Firstly, a metabolically-engineered mutant CTC-fdh-adhE2 was constructed by introducing heterologous formate dehydrogenase (fdh and bifunctional aldehyde/alcohol dehydrogenase (adhE2 simultaneously into wild-type C. tyrobutyricum. The mutant evaluation indicated that the fdh-catalyzed NADH-producing pathway improved butanol titer by 2.15-fold in the serum bottle and 2.72-fold in the bioreactor. Secondly, the medium supplements that could shift metabolic flux to improve the production of butyrate or butanol were identified, including vanadate, acetamide, sodium formate, vitamin B12 and methyl viologen hydrate. Finally, the free-cell fermentation produced 12.34 g/L of butanol from glucose using the mutant CTC-fdh-adhE2, which was 3.88-fold higher than that produced by the control mutant CTC-adhE2. This study demonstrated that the redox engineering in C. tyrobutyricum could greatly increase butanol production.

  13. Genetic engineering for improvement of Musa production in Africa ...

    African Journals Online (AJOL)

    The transgenic approach shows potential for the genetic improvement of the crop using a wide set of transgenes currently available which may confer resistance to nematode pests, fungal, bacterial and viral diseases. This article discusses the applications of genetic engineering for the enhancement of Musa production.

  14. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    p2492989

    Keywords: Methane, global warming, greenhouse gas, crossbreeding, residual feed intake, feed efficiency. #Corresponding ... improved production per constant unit, crossbreeding and selection for residual feed intake. ... convert such a measure into kg calf produced per kg CO2 equivalent (CH4 can be converted to a CO2.

  15. Determinants of adoption and productivity of improved rice varieties ...

    African Journals Online (AJOL)

    The study employed adoption index, logit model and stochastic frontier model to assess the adoption status, its determinants and impact on farmers' productivity respectively. The results show that farmers have responded appreciably to intervention programme that promote the use of improved rice varieties with an adoption ...

  16. Improved Processing and Marketing of Healthy Fish Products in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Improved Processing and Marketing of Healthy Fish Products in Inland Fisheries in Malawi (CultiAF). This project aims ... They will test different pre-drying methods: -no pre-drying treatment -parboiling -smoking -brining Solar dryer and business model testing Researchers will assess the solar dryers' economic performance.

  17. Improving radiation use efficiency in greenhouse production systems

    NARCIS (Netherlands)

    Li, Tao

    2015-01-01

    SUMMARY

    A large increase in agricultural production is needed to feed the increasing world population with their increasing demand per capita. However, growing competition for arable land, water, energy, and the degradation of the environment impose challenges to improve

  18. Improving cellulase production by Aspergillus niger using adaptive evolution

    NARCIS (Netherlands)

    Patyshakuliyeva, Aleksandrina; Arentshorst, Mark; Allijn, Iris E; Ram, Arthur F J; de Vries, Ronald P; Gelber, Isabelle Benoit

    OBJECTIVES: To evaluate the potential of adaptive evolution as a tool in generating strains with an improved production of plant biomass degrading enzymes. RESULTS: An Aspergillus niger cellulase mutant was obtained by adaptive evolution. Physiological properties of this mutant revealed a five times

  19. Improved keratinase production for feather degradation by Bacillus ...

    African Journals Online (AJOL)

    Optimal medium was used to improve the production of keratinase by Bacillus licheniformis ZJUEL31410, which has a promising application in the transformation of feather into soluble protein. The results of single factor design revealed that the concentration of feather at 20 g/l and the initial pH at value 8 was the best for ...

  20. Creating Shared Instructional Products: An Alternative Approach to Improving Teaching

    Science.gov (United States)

    Morris, Anne K.; Hiebert, James

    2011-01-01

    To solve two enduring problems in education--unacceptably large variation in learning opportunities for students across classrooms and little continuing improvement in the quality of instruction--the authors propose a system that centers on the creation of shared instructional products that guide classroom teaching. By examining systems outside…

  1. Campus Improvement Committee Working to Increase Morale, Productivity | Poster

    Science.gov (United States)

    The Campus Improvement Committee (CIC) has recently been re-established, with Mike Addington, manager, Operations and Maintenance, as chair. Addington is excited to be involved in a committee that’s so near and dear to his heart, and he’s a big believer in the value of increasing morale and productivity through an appealing and pleasant work environment.

  2. Sustainable production. The ultimate result of a continuous improvement

    NARCIS (Netherlands)

    Ron, de A.J.

    1998-01-01

    To fulfil market requirements, companies have introduced cost awareness, quality programs and techniques to become flexible. These items should be handled as a continuous process of improvement. The cost awareness implies that e.g. material waste is avoided during production, the quality programs

  3. Energy efficiency improvement target for SIC 34 - fabricated metal products

    Energy Technology Data Exchange (ETDEWEB)

    Byrer, T. G.; Billhardt, C. F.; Farkas, M. S.

    1977-03-15

    A March 15, 1977 revision of a February 15, 1977 document on the energy improvement target for the Fabricated Metal Products industry (SIC 34) is presented. A net energy savings in 1980 of 24% as compared with 1972 energy consumption in SIC 34 is considered a realistic goal. (ERA citation 04:045008)

  4. Production of high specific activity silicon-32

    International Nuclear Information System (INIS)

    Phillips, D.R.; Brzezinski, M.A.

    1998-01-01

    This is the final report of a three-year, Laboratory Directed Research and Development Project (LDRD) at Los Alamos National Laboratory (LANL). There were two primary objectives for the work performed under this project. The first was to take advantage of capabilities and facilities at Los Alamos to produce the radionuclide 32 Si in unusually high specific activity. The second was to combine the radioanalytical expertise at Los Alamos with the expertise at the University of California to develop methods for the application of 32 Si in biological oceanographic research related to global climate modeling. The first objective was met by developing targetry for proton spallation production of 32 Si in KCl targets and chemistry for its recovery in very high specific activity. The second objective was met by developing a validated field-useable, radioanalytical technique, based upon gas-flow proportional counting, to measure the dynamics of silicon uptake by naturally occurring diatoms

  5. Special report. New products that improve officer performance, safety.

    Science.gov (United States)

    1991-12-01

    The need for products that improve performance of security officers is counterbalanced these days by budgetary constraints. While this may limit major investments in security systems and personnel, less costly improvements or innovations might be worth considering. In this report, we will discuss four advances that may be valuable not only in hospital security, but in other industries as well. One of them, a smoke filter, was originally developed for the hotel industry. Another, a drug detection device, may replace the use of undercover agents or drug-sniffing' dogs in certain circumstances. The third new product is an economical patrol vehicle for parking facilities which might replace more costly vehicles such as golf carts or cars. The fourth product, a roving CCTV camera, is actually being tested at a Midwest medical center and may allow you to monitor areas of parking garages with cameras instead of officers on patrol.

  6. Can worksite nutritional interventions improve productivity and firm profitability?

    DEFF Research Database (Denmark)

    Jensen, Jørgen Dejgård

    2011-01-01

    ’ nutritional knowledge, food intake and health and on the firm’s profitability, mainly in terms of reduced absenteeism and presenteeism. Conclusions: Well-targeted and efficiently implemented diet-related worksite health promotion interventions may improve labour productivity by 1%–2%. On larger worksites......Aims: This paper investigates whether and how worksite nutrition policies can improve employee productivity. Methods: The questions are pursued through a literature review, including a systematic search of literature – combined with literature identified from backward references – on randomized......, such productivity gains are likely to more than offset the costs of implementing such interventions. These conclusions are subject to some uncertainty due to the relatively limited amount of literature in the field....

  7. The nutrition intervention improved adult human capital and economic productivity.

    Science.gov (United States)

    Martorell, Reynaldo; Melgar, Paul; Maluccio, John A; Stein, Aryeh D; Rivera, Juan A

    2010-02-01

    This article reviews key findings about the long-term impact of a nutrition intervention carried out by the Institute of Nutrition of Central America and Panama from 1969 to 1977. Results from follow-up studies in 1988-89 and 2002-04 show substantial impact on adult human capital and economic productivity. The 1988-89 study showed that adult body size and work capacity increased for those provided improved nutrition through age 3 y, whereas the 2002-04 follow-up showed that schooling was increased for women and reading comprehension and intelligence increased in both men and women. Participants were 26-42 y of age at the time of the 2002-04 follow-up, facilitating the assessment of economic productivity. Wages of men increased by 46% in those provided with improved nutrition through age 2 y. Findings for cardiovascular disease risk factors were heterogeneous; however, they suggest that improved nutrition in early life is unlikely to increase cardiovascular disease risk later in life and may indeed lower risk. In conclusion, the substantial improvement in adult human capital and economic productivity resulting from the nutrition intervention provides a powerful argument for promoting improvements in nutrition in pregnant women and young children.

  8. ANALYSIS AND IMPROVEMENT OF PRODUCTION EFFICIENCY IN A CONSTRUCTION MACHINE ASSEMBLY LINE

    Directory of Open Access Journals (Sweden)

    Alidiane Xavier

    2016-07-01

    Full Text Available The increased competitiveness in the market encourages the ongoing development of systems and production processes. The aim is to increase production efficiency to production costs and waste be reduced to the extreme, allowing an increased product competitiveness. The objective of this study was to analyze the overall results of implementing a Kaizen philosophy in an automaker of construction machinery, using the methodology of action research, which will be studied in situ the macro production process from receipt of parts into the end of the assembly line , prioritizing the analysis time of shipping and handling. The results show that the continuous improvement activities directly impact the elimination of waste from the assembly process, mainly related to shipping and handling, improving production efficiency by 30% in the studied processes.

  9. Guide for prioritizing power plant productivity improvement projects: handbook of availability improvement methodology

    International Nuclear Information System (INIS)

    1981-01-01

    As part of its program to help improve electrical power plant productivity, the Department of Energy (DOE) has developed a methodology for evaluating productivity improvement projects. This handbook presents a simplified version of this methodology called the Availability Improvement Methodology (AIM), which provides a systematic approach for prioritizing plant improvement projects. Also included in this handbook is a description of data taking requirements necessary to support the AIM methodology, benefit/cost analysis, and root cause analysis for tracing persistent power plant problems. In applying the AIM methodology, utility engineers should be mindful that replacement power costs are frequently greater for forced outages than for planned outages. Equivalent availability includes both. A cost-effective ranking of alternative plant improvement projects must discern between those projects which will reduce forced outages and those which might reduce planned outages. As is the case with any analytical procedure, engineering judgement must be exercised with respect to results of purely mathematical calculations

  10. Improving Quality of Shoe Soles Product using Six Sigma

    Science.gov (United States)

    Jesslyn Wijaya, Athalia; Trusaji, Wildan; Akbar, Muhammad; Ma’ruf, Anas; Irianto, Dradjad

    2018-03-01

    A manufacture in Bandung produce kind of rubber-based product i.e. trim, rice rollers, shoe soles, etc. After penetrating the shoe soles market, the manufacture has met customer with tight quality control. Based on the past data, defect level of this product was 18.08% that caused the manufacture’s loss of time and money. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control (DMAIC). In the design phase, the object’s problem and definition were defined. Delphi method was also used in this phase to identify critical factors. In the measure phase, the existing process stability and sigma quality level were measured. Fishbone diagram and failure mode and effect analysis (FMEA) were used in the next phase to analyse the root cause and determine the priority issues. Improve phase was done by designing alternative improvement strategy using 5W1H method. Some improvement efforts were identified, i.e. (i) modifying design of the hanging rack, (ii) create pantone colour book and check sheet, (iii) provide pedestrian line at compound department, (iv) buying stop watch, and (v) modifying shoe soles dies. Some control strategies for continuous improvement were proposed such as SOP or reward and punishment system.

  11. Improvement of Xylanase Production by Cochliobolus sativus in Submerged Culture

    Directory of Open Access Journals (Sweden)

    Yasser Bakri

    2008-01-01

    Full Text Available The xylanase production by a new Cochliobolus sativus Cs5 strain was improved under submerged fermentation. The xylanase was induced by xylan and repressed by glucose, sucrose, maltose, xylose, starch and cellulose. Highest enzyme production (98.25 IU/mL was recorded when wheat straw (4 % by mass per volume was used as a carbon source after 120 h of incubation. NaNO3 increased xylanase production 5.4-fold as compared to the control. Optimum initial pH was found to be 4.5 to 5. The C. sativus Cs5 strain grown under submerged culture in a simple medium proved to be a promising microorganism for xylanase production.

  12. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  13. Improving honey production in worker bees (Apis mellifera adansoni ...

    African Journals Online (AJOL)

    Modification of feeding activity, nursing care and undertaker behaviour were carried out among some colonies of honey bees Apis mellifera adansoni L to know the effect on honey production. Apiaries Numbers 1, 2 and 3 contain three replicates of experimental hives while apiary Number 4 contains control hives. All the ...

  14. Processing of byproducts to improve nisin production by ...

    African Journals Online (AJOL)

    One of them is its utilization as culture media, aiming to produce biomolecules with noble applications. Nisin is an extracellular peptide, produced by Lactococcus lactis, this peptide has been applied as a natural additive once it presents broad antibacterial activity. Applications of this bacteriocin include dental care products, ...

  15. Improved production, purification and some properties of α-amylase ...

    African Journals Online (AJOL)

    user

    2012-10-04

    Oct 4, 2012 ... 1Department of Natural Products / Microbiology and Biotechnology, Faculty of Pharmacy, King Abdulaziz University,. Jeddah ... starch medium by decreasing the concentration of soluble starch to 1%, increasing the corn steep liquor to .... activity were pooled and again applied on DEAE-cellulose column.

  16. Improving occupational safety and health by integration into product development

    DEFF Research Database (Denmark)

    Broberg, Ole

    1996-01-01

    A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

  17. Improved vanillin production in baker's yeast through in silico design.

    Science.gov (United States)

    Brochado, Ana Rita; Matos, Claudia; Møller, Birger L; Hansen, Jørgen; Mortensen, Uffe H; Patil, Kiran Raosaheb

    2010-11-08

    Vanillin is one of the most widely used flavouring agents, originally obtained from cured seed pods of the vanilla orchid Vanilla planifolia. Currently vanillin is mostly produced via chemical synthesis. A de novo synthetic pathway for heterologous vanillin production from glucose has recently been implemented in baker's yeast, Saccharamyces cerevisiae. In this study we aimed at engineering this vanillin cell factory towards improved productivity and thereby at developing an attractive alternative to chemical synthesis. Expression of a glycosyltransferase from Arabidopsis thaliana in the vanillin producing S. cerevisiae strain served to decrease product toxicity. An in silico metabolic engineering strategy of this vanillin glucoside producing strain was designed using a set of stoichiometric modelling tools applied to the yeast genome-scale metabolic network. Two targets (PDC1 and GDH1) were selected for experimental verification resulting in four engineered strains. Three of the mutants showed up to 1.5 fold higher vanillin β-D-glucoside yield in batch mode, while continuous culture of the Δpdc1 mutant showed a 2-fold productivity improvement. This mutant presented a 5-fold improvement in free vanillin production compared to the previous work on de novo vanillin biosynthesis in baker's yeast. Use of constraints corresponding to different physiological states was found to greatly influence the target predictions given minimization of metabolic adjustment (MOMA) as biological objective function. In vivo verification of the targets, selected based on their predicted metabolic adjustment, successfully led to overproducing strains. Overall, we propose and demonstrate a framework for in silico design and target selection for improving microbial cell factories.

  18. Improved vanillin production in baker's yeast through in silico design

    Science.gov (United States)

    2010-01-01

    Background Vanillin is one of the most widely used flavouring agents, originally obtained from cured seed pods of the vanilla orchid Vanilla planifolia. Currently vanillin is mostly produced via chemical synthesis. A de novo synthetic pathway for heterologous vanillin production from glucose has recently been implemented in baker's yeast, Saccharamyces cerevisiae. In this study we aimed at engineering this vanillin cell factory towards improved productivity and thereby at developing an attractive alternative to chemical synthesis. Results Expression of a glycosyltransferase from Arabidopsis thaliana in the vanillin producing S. cerevisiae strain served to decrease product toxicity. An in silico metabolic engineering strategy of this vanillin glucoside producing strain was designed using a set of stoichiometric modelling tools applied to the yeast genome-scale metabolic network. Two targets (PDC1 and GDH1) were selected for experimental verification resulting in four engineered strains. Three of the mutants showed up to 1.5 fold higher vanillin β-D-glucoside yield in batch mode, while continuous culture of the Δpdc1 mutant showed a 2-fold productivity improvement. This mutant presented a 5-fold improvement in free vanillin production compared to the previous work on de novo vanillin biosynthesis in baker's yeast. Conclusion Use of constraints corresponding to different physiological states was found to greatly influence the target predictions given minimization of metabolic adjustment (MOMA) as biological objective function. In vivo verification of the targets, selected based on their predicted metabolic adjustment, successfully led to overproducing strains. Overall, we propose and demonstrate a framework for in silico design and target selection for improving microbial cell factories. PMID:21059201

  19. Improved vanillin production in baker's yeast through in silico design

    Directory of Open Access Journals (Sweden)

    Hansen Jørgen

    2010-11-01

    Full Text Available Abstract Background Vanillin is one of the most widely used flavouring agents, originally obtained from cured seed pods of the vanilla orchid Vanilla planifolia. Currently vanillin is mostly produced via chemical synthesis. A de novo synthetic pathway for heterologous vanillin production from glucose has recently been implemented in baker's yeast, Saccharamyces cerevisiae. In this study we aimed at engineering this vanillin cell factory towards improved productivity and thereby at developing an attractive alternative to chemical synthesis. Results Expression of a glycosyltransferase from Arabidopsis thaliana in the vanillin producing S. cerevisiae strain served to decrease product toxicity. An in silico metabolic engineering strategy of this vanillin glucoside producing strain was designed using a set of stoichiometric modelling tools applied to the yeast genome-scale metabolic network. Two targets (PDC1 and GDH1 were selected for experimental verification resulting in four engineered strains. Three of the mutants showed up to 1.5 fold higher vanillin β-D-glucoside yield in batch mode, while continuous culture of the Δpdc1 mutant showed a 2-fold productivity improvement. This mutant presented a 5-fold improvement in free vanillin production compared to the previous work on de novo vanillin biosynthesis in baker's yeast. Conclusion Use of constraints corresponding to different physiological states was found to greatly influence the target predictions given minimization of metabolic adjustment (MOMA as biological objective function. In vivo verification of the targets, selected based on their predicted metabolic adjustment, successfully led to overproducing strains. Overall, we propose and demonstrate a framework for in silico design and target selection for improving microbial cell factories.

  20. Right Brain Activities to Improve Analytical Thinking.

    Science.gov (United States)

    Lynch, Marion E.

    Schools tend to have a built-in bias toward left brain activities (tasks that are linear and sequential in nature), so the introduction of right brain activities (functions related to music, rhythm, images, color, imagination, daydreaming, dimensions) brings a balance into the classroom and helps those students who may be right brain oriented. To…

  1. Improvement of Stand Jig Sealer and Its Increased Production Capacity

    Science.gov (United States)

    Soebandrija, K. E. N.; Astuti, S. W. D.

    2014-03-01

    This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766) and Solow (1957) and updated journal such as Reikard (2011) researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM ). The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach's alpha = 0.885>0.70, independence (Chi Square) Asymp. Sig=0.028financial analysis (NPV 2,340,596>0, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86). The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

  2. Production of Lupinus angustifolius protein hydrolysates with improved functional properties

    Directory of Open Access Journals (Sweden)

    Millán, Francisco

    2005-06-01

    Full Text Available Protein hydrolysates wer e obtained from lupin flour and from the purified globulin α -conglutin, and their functional properties were studied. Hydrolysis with alcalase for 60 minutes yielded degrees of hydrolysis ranging from 4 % to 11 % for lupin flour, and from 4 % to 13% for α -conglutin. Protein solubility, oil absorption, foam capacity and stability, emulsifying activity, and emulsion stability of hydrolysates with 6% degree of hydrolysis were determined and compared with the properties of the original flour. The protein hydrolysates showed better functional properties than the original proteins. Most importantly, the solubility of the α -conglutin and L. angustifolius flour hydrolysates was increased by 43 % and 52 %, respectively. Thus, lupin seed protein hydrolysates have improved functional properties and could be used in the elaboration of a variety of products such as breads, cakes, and salad dressings.Se obtuvieron hidrolizados proteicos de la harina del altramuz y de la globulina α - conglutina purificada y se estudiaron sus propiedades funcionales. La hidrólisis con alcalasa durante 60 minutos produjo hidrolizados con grados de hidrólisis entre el 4 % y el 11 % para la harina y entre el 4 % y el 13 % para la α - conglutina. Se estudió en un hidrolizado con un 6 % de grado de hidrólisis la solubilidad proteica, absorción de aceite, capacidad y estabilidad espumante y actividad y estabilidad emulsificante. Los hidrolizados proteicos mostraron mejores propiedades funcionales que las proteínas originales. Más aún, la solubilidad de los hidrolizados de α - conglutina y la harina se incrementó en un 43 % y 52 % respectivamente. Así pues, hidrolizados de proteínas de semilla de lupino presentan mejores propiedades funcionales y podrían usarse en la elaboración de productos como pan, dulces, salsas o cremas.

  3. Applied TRIZ in Improving Productivity in Textile Industry

    Directory of Open Access Journals (Sweden)

    Ahmad Aminah

    2017-01-01

    Full Text Available TRIZ is a methodology and a collection of problem solving tools and strategies that has been used in many other fields. Therefore, this paper proposes TRIZ method for improving the productivity in a textile industry. It focuses at the packing department in a textile company situated in Malaysia. The process was monitored and the problem was observed. TRIZ method is applied in this problem using Functional Analysis and trimming method. A comparison between before and after implementation is done in order to evaluate the productivity effectiveness.

  4. Adhesion improvement of lignocellulosic products by enzymatic pre-treatment.

    Science.gov (United States)

    Widsten, Petri; Kandelbauer, Andreas

    2008-01-01

    Enzymatic bonding methods, based on laccase or peroxidase enzymes, for lignocellulosic products such as medium-density fiberboard and particleboard are discussed with reference to the increasing costs of presently used petroleum-based adhesives and the health concerns associated with formaldehyde emissions from current composite products. One approach is to improve the self-bonding properties of the particles by oxidation of their surface lignin before they are fabricated into boards. Another method involves using enzymatically pre-treated lignins as adhesives for boards and laminates. The application of this technology to achieve wet strength characteristics in paper is also reviewed.

  5. Improving preanalytic processes using the principles of lean production (Toyota Production System).

    Science.gov (United States)

    Persoon, Thomas J; Zaleski, Sue; Frerichs, Janice

    2006-01-01

    The basic technologies used in preanalytic processes for chemistry tests have been mature for a long time, and improvements in preanalytic processes have lagged behind improvements in analytic and postanalytic processes. We describe our successful efforts to improve chemistry test turnaround time from a central laboratory by improving preanalytic processes, using existing resources and the principles of lean production. Our goal is to report 80% of chemistry tests in less than 1 hour and to no longer recognize a distinction between expedited and routine testing. We used principles of lean production (the Toyota Production System) to redesign preanalytic processes. The redesigned preanalytic process has fewer steps and uses 1-piece flow to move blood samples through the accessioning, centrifugation, and aliquoting processes. Median preanalytic processing time was reduced from 29 to 19 minutes, and the laboratory met the goal of reporting 80% of chemistry results in less than 1 hour for 11 consecutive months.

  6. Improving the quality of pork and pork products for the consumer : development of innovative, integrated, and sustainable food production chains of high quality pork products matching consumer demands

    NARCIS (Netherlands)

    Heimann, B.; Christensen, M.; Rosendal Rasmussen, S.; Bonneau, M.; Grunert, K.G.; Arnau, J.; Trienekens, J.H.; Oksbjerg, N.; Greef, de K.H.; Petersen, B.

    2012-01-01

    Improving the quality of pork and pork products for the consumer: development of innovative, integrated, and sustainable food production chains of high quality pork products matching consumer demands.

  7. Continued SOFC cell and stack technology and improved production methods

    Energy Technology Data Exchange (ETDEWEB)

    Wandel, M.; Brodersen, K.; Phair, J. (and others)

    2009-05-15

    Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

  8. Identifying improvement potentials in cement production with life cycle assessment.

    Science.gov (United States)

    Boesch, Michael Elias; Hellweg, Stefanie

    2010-12-01

    Cement production is an environmentally relevant process responsible for 5% of total anthropogenic carbon dioxide emissions and 7% of industrial fuel use. In this study, life cycle assessment is used to evaluate improvement potentials in the cement production process in Europe and the USA. With a current fuel substitution rate of 18% in Europe and 11% in the USA, both regions have a substantial potential to reduce greenhouse gas emissions and save virgin resources by further increasing the coprocessing of waste fuels. Upgrading production technology would be particularly effective in the USA where many kiln systems with very low energy efficiency are still in operation. Using best available technology and a thermal substitution rate of 50% for fuels, greenhouse gas emissions could be reduced by 9% for Europe and 18% for the USA per tonne of cement. Since clinker production is the dominant pollution producing step in cement production, the substitution of clinker with mineral components such as ground granulated blast furnace slag or fly ash is an efficient measure to reduce the environmental impact. Blended cements exhibit substantially lower environmental footprints than Portland cement, even if the substitutes feature lower grindability and require additional drying and large transport distances. The highest savings in CO(2) emissions and resource consumption are achieved with a combination of measures in clinker production and cement blending.

  9. A participatory and integrative approach to improve productivity and ergonomics in assembly

    NARCIS (Netherlands)

    Looze, M.P. de; Rhijn, J.W. van; Deursen, J. van; Tuinzaad, G.H.; Reijneveld, C.N.

    2003-01-01

    A participatory and integrative approach was applied to improve the productivity and ergonomics of the assembly lines in two factories, producing magnetic stop valves and office furniture, respectively. Main elements of the approach are the active participation of the company and the integration of

  10. Health physics aspects of activation products from fusion reactors

    International Nuclear Information System (INIS)

    Shoup, R.L.; Poston, J.W.; Easterly, C.E.; Jacobs, D.G.

    1975-01-01

    A review of the activation products from fusion reactors and their attendant impacts is discussed. This includes a discussion on their production, expected inventories, and the status of metabolic data on these products

  11. USE OF IONIC LIQUIDS FOR IMPROVEMENT OF CELLULOSIC ETHANOL PRODUCTION

    Directory of Open Access Journals (Sweden)

    Qijun Wang

    2011-02-01

    Full Text Available Cellulosic ethanol production has drawn much attention in recent years. However, there remain significant technical challenges before such production can be considered as economically feasible at an industrial scale. Among them, the efficient conversion of carbohydrates in lignocellulosic biomass into fermentable sugars is one of the most challenging technical difficulties in cellulosic ethanol production. Use of ionic liquids has opened new avenues to solve this problem by two different pathways. One is pretreatment of lignocellulosic biomass using ionic liquids to increase its enzymatic hydrolysis efficiency. The other is to transform the hydrolysis process of lignocellulosic biomass from a heterogeneous reaction system to a homogeneous one by dissolving it into ionic liquids, thus improving its hydrolysis efficiency.

  12. Highlights of contractor initiatives in quality enhancement and productivity improvement

    Science.gov (United States)

    1986-01-01

    The NASA/Contractor Team efforts are presented as part of NASA's continuing effort to facilitate the sharing of quality and productivity improvement ideas among its contractors. This complilation is not meant to be a comprehensive review of contractor initiative nor does it necessarily express NASA's views. The submissions represent samples from a general survey, and were not edited by NASA. The efforts are examples of quality and productivity programs in private industry, and as such, highlight company efforts in individual areas. Topics range from modernization of equipment, hardware, and technology to management of human resources. Of particular interest are contractor initiatives which deal with measurement and evaluation data pertaining to quality and productivity performance.

  13. Membrane engineering via trans unsaturated fatty acids production improves Escherichia coli robustness and production of biorenewables.

    Science.gov (United States)

    Tan, Zaigao; Yoon, Jong Moon; Nielsen, David R; Shanks, Jacqueline V; Jarboe, Laura R

    2016-05-01

    Constructing microbial biocatalysts that produce biorenewables at economically viable yields and titers is often hampered by product toxicity. For production of short chain fatty acids, membrane damage is considered the primary mechanism of toxicity, particularly in regards to membrane integrity. Previous engineering efforts in Escherichia coli to increase membrane integrity, with the goal of increasing fatty acid tolerance and production, have had mixed results. Herein, a novel approach was used to reconstruct the E. coli membrane by enabling production of a novel membrane component. Specifically, trans unsaturated fatty acids (TUFA) were produced and incorporated into the membrane of E. coli MG1655 by expression of cis-trans isomerase (Cti) from Pseudomonas aeruginosa. While the engineered strain was found to have no increase in membrane integrity, a significant decrease in membrane fluidity was observed, meaning that membrane polarization and rigidity were increased by TUFA incorporation. As a result, tolerance to exogenously added octanoic acid and production of octanoic acid were both increased relative to the wild-type strain. This membrane engineering strategy to improve octanoic acid tolerance was found to require fine-tuning of TUFA abundance. Besides improving tolerance and production of carboxylic acids, TUFA production also enabled increased tolerance in E. coli to other bio-products, e.g. alcohols, organic acids, aromatic compounds, a variety of adverse industrial conditions, e.g. low pH, high temperature, and also elevated styrene production, another versatile bio-chemical product. TUFA permitted enhanced growth due to alleviation of bio-product toxicity, demonstrating the general effectiveness of this membrane engineering strategy towards improving strain robustness. Copyright © 2016 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  14. Improved biological processes for the production of aryl sulfates

    DEFF Research Database (Denmark)

    2017-01-01

    The present invention generally relates to the field of biotechnology as it applies to the production of aryl sulfates using recombinant host cells. More particularly, the present invention pertains to recombinant host cells comprising (e.g., expressing) a polypeptide having aryl sulfotransferase...... activity, wherein said recombinant host cells have been modified to have an increased uptake of sulfate compared to identical host cells that does not carry said modification. Further provided are processes for the production of aryl sulfates, such as zosteric acid, employing such recombinant host cells....

  15. WORKPLACE SPIRITUALITY FOR IMPROVED PRODUCTIVITY:A GENDERED PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Shikha Vyas-Doorgapersad

    2017-01-01

    Full Text Available There are a very few studies available to gain insight into the impact ofyoga andalternative therapies1on stress management, conflict resolution and workproductivity. In previous studies the focus fell on the gendered perspective,exploring the impact of spiritual modalities on the physical and mental wellness ofmale and female employees.Spiritual practices such as yogaandother alternativetherapies have been found to be significant to enhance work productivity, hence bepart of organisational wellness programmes. However, this aspect is not fullyimplemented due to various reasons including a lack of spiritual understanding,religious preferences and organisational cultures.The aim of this article is to expandupon and enhance this analysis by aligning spiritual practices to workplaceproductivity.Books, journal articles, dissertations, and conference proceedingsdealing with spirituality at the workplacewere reviewed. Based on the literatureavailable, two hypotheses are explored, namely(a that workplace spiritualityenhances employee wellness and has a positive impact on improved productivity;and(b that workplace spirituality impacts differently on male and femaleemployees (gendered perspective and leads to improved productivity. The articleformulates a model called Workplace Spirituality for Gender-based Productivity(WSG-bP for consideration under the umbrella of existing Employee WorkWellness programmes

  16. Improvement of halophilic cellulase production from locally isolated fungal strain.

    Science.gov (United States)

    Gunny, Ahmad Anas Nagoor; Arbain, Dachyar; Jamal, Parveen; Gumba, Rizo Edwin

    2015-07-01

    Halophilic cellulases from the newly isolated fungus, Aspergillus terreus UniMAP AA-6 were found to be useful for in situ saccharification of ionic liquids treated lignocelluloses. Efforts have been taken to improve the enzyme production through statistical optimization approach namely Plackett-Burman design and the Face Centered Central Composite Design (FCCCD). Plackett-Burman experimental design was used to screen the medium components and process conditions. It was found that carboxymethylcellulose (CMC), FeSO4·7H2O, NaCl, MgSO4·7H2O, peptone, agitation speed and inoculum size significantly influence the production of halophilic cellulase. On the other hand, KH2PO4, KOH, yeast extract and temperature had a negative effect on enzyme production. Further optimization through FCCCD revealed that the optimization approach improved halophilic cellulase production from 0.029 U/ml to 0.0625 U/ml, which was approximately 2.2-times greater than before optimization.

  17. Cisgenic barley with improved phytase activity

    DEFF Research Database (Denmark)

    Holme, Inger; Dionisio, Giuseppe; Brinch-Pedersen, Henrik

    2012-01-01

    phytase gene (HvPAPhy_a) expressed during grain filling to evaluate the cisgenesis concept in barley. The marker gene elimination method was used to obtain marker-free plant lines. Here, the gene of interest and the selection gene are flanked by their own T-DNA borders to allow unlinked integration...... of the two genes. We analysed the transformants for co-transformation efficiency, increased phytase activities in the grain, integration of the kanamycin resistance gene of the vector-backbone and segregation between the HvPAPhy_a insert and the hygromycin resistance gene. The frequencies of the four......PAPhy_a insert for further analysis. Seeds from plants homozygous for the insert showed 2.6- and 2.8-fold increases in phytase activities and the activity levels were stable over the three generations analysed. In one of the selected lines, the flanking sequences from both the left and right T-DNA borders were...

  18. Improvement of Production Quality by using Six Sigma Technique:

    Directory of Open Access Journals (Sweden)

    Sawsan Ali

    2013-04-01

    Full Text Available As a result of lack of conformity of the outer diameter of the filling piston of plastic syringe to the specifications set out in the design map and the increased demand for its  products from the Medical syringes factory – Babylon. The research conducts the necessary investigations and  analysis of the production process as most of the units rejected by fact that the outer diameter of the filling piston is smaller than the minimum specification and units returned to work  due to the fact that  the outer diameter larger than the upper limit of the specification.13The research aims firstly to examine the outer diameter of the filling piston through the use of the control chart of the variables represented by the average , and its impact on the production process capability because the increase in diameter specification leads to an increase in the pressure imposed on the lining of the cylinder, causing difficulty in piston movement and a decrease in diameter specification which leads to loose the process capability to prevent leakage of fluid, causing air to enter as well as to speed the movement of the piston, which negatively affects human life in both cases. Secondly, study the possibility of improving the production process capability by using advanced levels of the sigma.The results showed that the production process in the case of a disciplined and follows a normal distribution, the pointer of  the production process capability is equal to (0.55 and the factory works within the level of Sigma equal to (1.65. The proportion of a damaged product is (15.8 % and rework (0.99 %.In order to  reduce the proportion of damaged product, this paper introduces a quality plan depending on ( ±0.025 as tolerance limits instead of ( ±0.05 to increase sigma level by 202%.

  19. Improvement of productivity in low volume production industry layout by using witness simulation software

    Science.gov (United States)

    Jaffrey, V.; Mohamed, N. M. Z. N.; Rose, A. N. M.

    2017-10-01

    In almost all manufacturing industry, increased productivity and better efficiency of the production line are the most important goals. Most factories especially small scale factory has less awareness of manufacturing system optimization and lack of knowledge about it and uses the traditional way of management. Problems that are commonly identified in the factory are a high idle time of labour and also small production. This study is done in a Small and Medium Enterprises (SME) low volume production company. Data collection and problems affecting productivity and efficiency are identified. In this study, Witness simulation software is being used to simulate the layout and the output is focusing on the improvement of layout in terms of productivity and efficiency. In this study, the layout is rearranged by reducing the travel time from a workstation to another workstation. Then, the improved layout is modelled and the machine and labour statistic of both, original and improved layout is taken. Productivity and efficiency are calculated for both layout and then being compared.

  20. Engineering Escherichia coli for improved ethanol production from gluconate.

    Science.gov (United States)

    Hildebrand, Amanda; Schlacta, Theresa; Warmack, Rebeccah; Kasuga, Takao; Fan, Zhiliang

    2013-10-10

    We report on engineering Escherichia coli to produce ethanol at high yield from gluconic acid (gluconate). Knocking out genes encoding for the competing pathways (l-lactate dehydrogenase and pyruvate formate lyase A) in E. coli KO11 eliminated lactate production, lowered the carbon flow toward acetate production, and improved the ethanol yield from 87.5% to 97.5% of the theoretical maximum, while the growth rate of the mutant strain was about 70% of the wild type. The corresponding genetic modifications led to a small improvement of ethanol yield from 101.5% to 106.0% on glucose. Deletion of the pyruvate dehydrogenase gene (pdh) alone improved the ethanol yield from 87.5% to 90.4% when gluconate was a substrate. The growth rate of the mutant strain was identical to that of the wild type. The corresponding genetic modification led to no improvements on ethanol yield on glucose. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Improving production of Zebra Fish Embryos in the lab

    DEFF Research Database (Denmark)

    Thomsen, Jens Peter; Adu, Robert Ohene

    2011-01-01

    in the laboratory. Culture conditions were maintained in the aquaria as stipulated in the OECD draft proposal for a new guideline on fish embryo tests. Furthermore, a sequence of steps were adopted and followed to improve upon previous work done in the lab in 2006. About 200 eggs were produced in one spawn trap......The utilization of fish embryos in toxicity testing of hazardous chemicals has recently been adopted in order to satisfy stricter rules and regulations related to using adult animals in toxicity testing. This paper presents optimising steps towards improving zebra fish embryo production...... within an hour of onset of light, an improvement over the 50-60 eggs produced in the previous work. This result demonstrates that with the right culture conditions and proper optimisation of procedure the required number of embryos needed for toxicity testing can be obtained....

  2. Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

    DEFF Research Database (Denmark)

    Saltini, Rolando; Akkerman, Renzo

    2012-01-01

    hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety......The primary aim of food traceability is to increase food safety, but traceability systems can also bring other benefits to production systems and supply chains. In the literature these benefits are extensively discussed, but studies that quantify them are scarce. In this paper we propose two...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

  3. Improvement of animal production through research using radioisotopes and radiation

    International Nuclear Information System (INIS)

    1976-01-01

    High birth rates coupled with greater longevity continue to increase the.world's population, especially in the less developed countries. The prevention of undernutrition and ultimately starvation will only be averted by increased food production and more efficient use of that food. At the same time people who have largely subsisted upon plant food diets and whose standards of living are rising, want to increase the use of animal products in order to upgrade their diets. To provide this high quality food animal scientists must find ways of increasing the supply especially in the less developed countries. Since most of the available pasture lands are presently being fully utilized or overgrazed, improved efficiency of the present herds and use of agroindustrial wastes are the only methods left to increase production significantly. The use of radioisotopes and radiation in research are making major contributions to the understanding of the processes necessary to achieve better animal production. In order to provide a forum for exchange of information in this field, the FAO/IAEA Joint Division of Atomic Energy in Food and Agriculture organized an international symposium, held in Vienna, from 2?6 February, on the use of nuclear techniques in animal production. Among the topics discussed at the symposium were: Soil-plant-animal relations regarding minerals, Trace elements in animal nutrition, Calcium, phosphorus and magnesium metabolism, Protein (nitrogen) metabolism - ruminants Protein (nitrogen) metabolism - non-ruminants Nuclear techniques in the control of parasitic infections Animal endocrinology with special emphasis on radioimmunoassays

  4. Improvement of animal production through research using radioisotopes and radiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-07-01

    High birth rates coupled with greater longevity continue to increase the.world's population, especially in the less developed countries. The prevention of undernutrition and ultimately starvation will only be averted by increased food production and more efficient use of that food. At the same time people who have largely subsisted upon plant food diets and whose standards of living are rising, want to increase the use of animal products in order to upgrade their diets. To provide this high quality food animal scientists must find ways of increasing the supply especially in the less developed countries. Since most of the available pasture lands are presently being fully utilized or overgrazed, improved efficiency of the present herds and use of agroindustrial wastes are the only methods left to increase production significantly. The use of radioisotopes and radiation in research are making major contributions to the understanding of the processes necessary to achieve better animal production. In order to provide a forum for exchange of information in this field, the FAO/IAEA Joint Division of Atomic Energy in Food and Agriculture organized an international symposium, held in Vienna, from 2?6 February, on the use of nuclear techniques in animal production. Among the topics discussed at the symposium were: Soil-plant-animal relations regarding minerals, Trace elements in animal nutrition, Calcium, phosphorus and magnesium metabolism, Protein (nitrogen) metabolism - ruminants Protein (nitrogen) metabolism - non-ruminants Nuclear techniques in the control of parasitic infections Animal endocrinology with special emphasis on radioimmunoassays.

  5. Improved energy efficiency in juice production through waste heat recycling

    International Nuclear Information System (INIS)

    Anderson, J.-O.; Elfgren, E.; Westerlund, L.

    2014-01-01

    Highlights: • A heating system at a juice production was investigated and improved. • Different impacts of drying cycle improvements at the energy usage were explored. • The total heat use for drying could thereby be decreased with 52%. • The results point out a significant decrease of heat consumption with low investment costs. - Abstract: Berry juice concentrate is produced by pressing berries and heating up the juice. The by-products are berry skins and seeds in a press cake. Traditionally, these by-products have been composted, but due to their valuable nutrients, it could be profitable to sell them instead. The skins and seeds need to be separated and dried to a moisture content of less than 10 %wt (on dry basis) in order to avoid fermentation. A berry juice plant in the north of Sweden has been studied in order to increase the energy and resource efficiency, with special focus on the drying system. This was done by means of process integration with mass and energy balance, theory from thermodynamics and psychrometry along with measurements of the juice plant. Our study indicates that the drying system could be operated at full capacity without any external heat supply using waste heat supplied from the juice plant. This would be achieved by increasing the efficiency of the dryer by recirculation of the drying air and by heat supply from the flue gases of the industrial boiler. The recirculation would decrease the need of heat in the dryer with about 52%. The total heat use for the plant could thereby be decreased from 1262 kW to 1145 kW. The improvements could be done without compromising the production quality

  6. Improved curdlan production with discarded bottom parts of Asparagus spear.

    Science.gov (United States)

    Anane, Rex Frimpong; Sun, Huifang; Zhao, Lamei; Wang, Le; Lin, Chun; Mao, Zichao

    2017-04-07

    This work evaluated the improvement of curdlan production of Agrobacterium sp. ATCC 31749 by using culture medium containing juice of discarded bottom part of green Asparagus spear (MJDA). Curdlan production was carried out using Agrobacterium sp. ATCC 31749 in flasks with different volumes of MJDA and its non-juice-adding control (CK) incubated in shaker at 30 °C, 200 rpm rotation for 168 h. All MJDA media increased Agrobacterium sp. ATCC 31749 cell mass and enhanced the cells' ability to utilise sucrose, the carbon source for curdlan biosynthesis, and thereby produced higher concentration of curdlan than CK which is used for commercial production of curdlan. After 168 h of fermentation, 10% MJDA produced 40.2 g/l of curdlan whiles CK produced 21.1 g/l. Curdlan production was increased by 90.4% higher in 10% MJDA than CK. Curdlan produced by 10% MJDA contains 1.2 and 1.5 µg/ml of Asparagus flavonoids and saponins respectively as additives which have wide range of health benefits. The mass of sucrose needed to produce 1.0 g curdlan by Agrobacterium sp. ATCC 31749 in CK is 1.7-fold more than in 10% MJDA. The results strongly revealed that 5-10% MJDA is a good curdlan fermentation media which increase curdlan production yield with cheaper cost of production and simultaneously reduce environmental waste resulting from the large scaled discarded bottom parts of green Asparagus spear during Asparagus production.

  7. Health sector employment growth calls for improvements in labor productivity.

    Science.gov (United States)

    Hofmarcher, Maria M; Festl, Eva; Bishop-Tarver, Leslie

    2016-08-01

    While rising costs of healthcare have put increased fiscal pressure on public finance, job growth in the health sector has had a stabilizing force on overall employment levels - not least in times of economic crises. In 2014 EU-15 countries employed 21 million people in the health and social care sector. Between 2000 and 2014 the share of employed persons in this sector rose from 9.5% to 12.5% of the total labor force in EU-15 countries. Over time labor input growth has shifted towards residential care activities and social work while labor in human health activities including hospitals and ambulatory care still comprises the major share. About half of the human health labor force works in hospital. Variation of health and social care employment is large even in countries with generally comparable institutional structures. While standard measures of productivity in health and social care are not yet comparable across countries, we argue that labor productivity of a growing health work force needs more attention. The long-term stability of the health system will require care delivery models that better utilize a growing health work force in concert with smart investments in digital infrastructure to support this transition. In light of this, more research is needed to explain variations in health and social care labor endowments, to identify effective policy measures of labor productivity enhancement including enhanced efforts to develop comparable productivity indicators in these areas. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. Improving lactate metabolism in an intensified CHO culture process: productivity and product quality considerations.

    Science.gov (United States)

    Xu, Sen; Hoshan, Linda; Chen, Hao

    2016-11-01

    In this study, we discussed the development and optimization of an intensified CHO culture process, highlighting medium and control strategies to improve lactate metabolism. A few strategies, including supplementing glucose with other sugars (fructose, maltose, and galactose), controlling glucose level at Productivity and product quality attributes differences between batch, fed-batch, and concentrated fed-batch cultures were discussed. The importance of process and cell metabolism understanding when adapting the existing process to a new operational mode was demonstrated in the study.

  9. INNOVATIVE USE OF QUALITY MANAGEMENT METHODS FOR PRODUCT IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Katarzyna MIDOR

    2016-10-01

    Full Text Available Organisations constantly look for new, innovative solutions and methods which could be used to improve their efficiency and increase the quality of their products. Identifying the causes for returns is an important issue for modern compa-nies, as returns are the cause for the increase in production costs and, most importantly, the loss of credibility in the eyes of the client. Therefore, for the company to be able to sustain or strengthen its position on the market, it has to follow the rules of quality management. Especially important is the rule of constant improvement. This rule is primarily connected with preventing errors and defects from occurring at all the stages of the production process. To achieve that, one must, among other things, use quality management tools. The article presents an analysis of causes for returns of a vibrating screen produced by a company which manufactures machinery and equipment for the extractive industry, using quality management tools such as the Ishikawa diagram and Pareto analysis. The analysis allowed for the identifi-cation of the causes of client returns which could not be previously identified, and proposing solutions for them.

  10. Real time information management for improving productivity in metallurgical complexes

    International Nuclear Information System (INIS)

    Bascur, O.A.; Kennedy, J.P.

    1999-01-01

    Applying the latest information technologies in industrial plants has become a serious challenge to management and technical teams. The availability of real time and historical operations information to identify the most critical part of the processing system from mechanical integrity is a must for global plant optimization. Expanded use of plant information on the desktop is a standard tool for revenue improvement, cost reduction, and adherence to production constraints. The industrial component desktop supports access to information for process troubleshooting, continuous improvement and innovation by plant and staff personnel. Collaboration between groups enables the implementation of an overall process effectiveness index based on losses due to equipment availability, production and product quality. The key to designing technology is to use the Internet based technologies created by Microsoft for its marketplace-office automation and the Web. Time derived variables are used for process analysis, troubleshooting and performance assessment. Connectivity between metallurgical complexes, research centers and their business system has become a reality. Two case studies of large integrated mining/metallurgical complexes are highlighted. (author)

  11. Product Recall Policies and Their Improvement in Korea

    Directory of Open Access Journals (Sweden)

    Huh Kyungok

    2016-12-01

    Full Text Available This article aims to investigate recall policies for product safety in Korea and make suggestions for future improvements. Problematic issues in current recall policies are reviewed and analyzed. Based on survey results and previous studies, this article discusses the consumer perception of a recall. Consumers tend to regard a recall as a signal of poor quality. Furthermore, regulatory differences and weak penalties remain as obstacles to improving the recall system. Suggestions for the betterment of recall policies are derived from consultations with an expert panel and the application of other appropriate methods. At first, despite an increasing number of recall cases in Korea, it turns out that consumers are not highly sensitive to recalls, although their perceptions are mostly negative. Secondly, regulatory inconsistencies and difference problems are primarily attributable to the existence of many separate rules and regulations by product category. Thirdly, the information concerning recalls is limited, which creates an inefficient environment in which manufacturers are reluctant to voluntarily recall a defective product and consumer participation rates are too low. Therefore, the government should induce consumers to have more positive perceptions of recalls whilst concurrently reinforcing the related rules and regulations in accordance with international standards.

  12. Improving wheat productivity through source and timing of nitrogen fertilization

    International Nuclear Information System (INIS)

    Jan, M.T.; Khan, A.; Afridi, M.Z.; Arif, M.; Khan, M.J.; Farhatullah; Jan, D.; Saeed, M.

    2011-01-01

    Efficient nitrogen (N) fertilizer management is critical for the improved production of wheat (Triticum aestivum L.) and can be achieved through source and timing of N application. Thus, an experiment was carried out at the Research Farm of KPK Agricultural University Peshawar during 2005-06 to test the effects of sources and timing of N application on yield and yield components of wheat. Nitrogen sources were ammonium (NH/sub 4/) and nitrate (NO/sub 3/) applied at the rate of 100 kg ha/sup -1/ at three different stages i.e., at sowing (S1), tillering (S2) and boot stage (S3). Ammonium N increased yield component but did not affect the final grain yield. Split N application at sowing, tillering and boot stages had increased productive tillers m-2, and thousand grains weight, whereas grain yield was higher when N was applied at tillering and boot stages. Nitrogen fertilization increased 20% grain yield compared to control regardless of N application time. It was concluded from the experiment that split application of NH/sub 4/-N performed better than full dose application and/or NO/sub 3/-N for improved wheat productivity and thus, is recommended for general practice in agro-climatic conditions of Peshawar. (author)

  13. What about improving the productivity of electric power plants

    International Nuclear Information System (INIS)

    Lawroski, H.; Knecht, P.D.; Prideaux, D.L.; Zahner, R.R.

    1976-01-01

    The FEA in April of 1974 established an Interagency Task Group on Power Plant Reliability, which was charged with the broad objective of improving the productivity of existing and planned large fossil-fueled and nuclear power plants. It took approximately 11 months for the task force to publish a report, ''Report on Improving the Productivity of Electrical Power Plants'' (FEA-263-G), a detailed analysis and comparison of successful and below-average-performance power plants. The Nuclear Service Corp. portion of this study examined four large central-station power plants: two fossil (coal) and two nuclear plants. Only plants with electrical generation capacities greater than 400 MWe were considered. The study included the following: staff technical skill, engineering support, QA program, plant/corporate coordination, operation philosophy, maintenance programs, federal/state regulations, network control, and equipment problems. Personnel were interviewed, and checklists providing input from some 21 or more plant and corporate personnel of each utility were utilized. Reports and other documentation were also reviewed. It was recognized early that productivity is closely allied to technical skills and positive motivation. For this reason, considerable attention was given to people in this study

  14. Physician Order Entry Clerical Support Improves Physician Satisfaction and Productivity.

    Science.gov (United States)

    Contratto, Erin; Romp, Katherine; Estrada, Carlos A; Agne, April; Willett, Lisa L

    2017-05-01

    To examine the impact of clerical support personnel for physician order entry on physician satisfaction, productivity, timeliness with electronic health record (EHR) documentation, and physician attitudes. All seven part-time physicians at an academic general internal medicine practice were included in this quasi-experimental (single group, pre- and postintervention) mixed-methods study. One full-time clerical support staff member was trained and hired to enter physician orders in the EHR and conduct previsit planning. Physician satisfaction, productivity, timeliness with EHR documentation, and physician attitudes toward the intervention were measured. Four months after the intervention, physicians reported improvements in overall quality of life (good quality, 71%-100%), personal balance (43%-71%), and burnout (weekly, 43%-14%; callousness, 14%-0%). Matched for quarter, productivity increased: work relative value unit (wRVU) per session increased by 20.5% (before, April-June 2014; after, April-June 2015; range -9.2% to 27.5%). Physicians reported feeling more supported, more focused on patient care, and less stressed and fatigued after the intervention. This study supports the use of physician order entry clerical personnel as a simple, cost-effective intervention to improve the work lives of primary care physicians.

  15. Innovative Use of Quality Management Methods for Product Improvement

    Science.gov (United States)

    Midor, Katarzyna; Žarnovský, Jozef

    2016-12-01

    Organisations constantly look for new, innovative solutions and methods which could be used to improve their efficiency and increase the quality of their products. Identifying the causes for returns is an important issue for modern companies, as returns are the cause for the increase in production costs and, most importantly, the loss of credibility in the eyes of the client. Therefore, for the company to be able to sustain or strengthen its position on the market, it has to follow the rules of quality management. Especially important is the rule of constant improvement. This rule is primarily connected with preventing errors and defects from occurring at all the stages of the production process. To achieve that, one must, among other things, use quality management tools. The article presents an analysis of causes for returns of a vibrating screen produced by a company which manufactures machinery and equipment for the extractive industry, using quality management tools such as the Ishikawa diagram and Pareto analysis. The analysis allowed for the identification of the causes of client returns which could not be previously identified, and proposing solutions for them.

  16. Improvement of the asphalt-waste products in leachability

    International Nuclear Information System (INIS)

    Matsuzuru, Hideo; Fojiri, Shigeru; Moriyama, Noboru

    1980-05-01

    To improve in leachability of the asphalt products containing evaporator residue from BWR, a method of reducing the swelling of asphalt products, which is a major cause for increasing the leachability, has been developed. Leachability of the resultant asphalt products was examined by IAEA's method. The reduction of swelling is achieved successfully by addition of an equivalent quantity of calcium chloride to the sodium sulfate contained in the residue; the sodium sulfate is converted to calcium sulfate and sodium chloride. The specimen (Asphalt/Na 2 SO 4 : 0.5) prepared by this improved method shows little swelling when immersed in water. The specimen without addition of calcium chloride gives a cumulative leaching fraction of about 0.65 for 137 Cs and 0.20 for 60 Co in 30 days. On the contrary, the corresponding values in about 100 days of the specimen with calcium chloride added are 5 x 10 -4 and 1 x 10 -4 for 137 Cs and 60 Co, respectively. These results indicate that the method is promising for reducing the leachability. Coating of the specimen surface with a fresh bitumen further reduces the leachability to a negligibly small value. (author)

  17. Genetic improvements to productivity of cattle in tropical Africa

    International Nuclear Information System (INIS)

    Frisch, J.E.; Vercoe, J.E.

    1986-01-01

    Improvement in productivity of cattle in some areas of tropical Africa is likely to be related mainly to improvement in environmental conditions, including the implementation of effective vaccination programmes and an increased availability of feed. In other areas, scope also exists to increase output by increasing the genetic potential of indigenous breeds and animals. The variation within indigenous breeds in resistance to environmental stresses and in genetic potentials could be exploited by within-breed selection but responses are likely to be slow. Initial attempts at genetic improvements should therefore concentrate on utilizing between-breed variation in these traits by identifying breeds with the required attributes and crossing them to the breed under improvement. Increases in milk yield and size are mainly dependent on the successful implementation of cross-breeding programmes aimed at maintaining high resistance to environmental stresses while also increasing genetic potentials up to the level that can be supported by the available nutrition. The most suitable combination of breeds to be used in these crosses is not known at present. However, in areas of high trypanosome challenge, crosses between trypanotolerant breeds from East and West Africa may be the best option. In areas of lower trypanosome challenge but where high levels of other environmental stresses exist, crosses between indigenous and Indian breeds may be the most appropriate. Only in those areas where parasite and disease challenge is low and the plane of nutrition is high will crosses to higher yielding European Bos taurus breeds be suitable. Improved standards of living of sections of society and increases in population have contributed to increased demand for cattle products. If this demand is to be met from African sources, output must be increased. Some of the ways in which this may be achieved are considered in the paper. (author)

  18. Developing and improving human capital and productivity in public companies

    Directory of Open Access Journals (Sweden)

    Nozipho Sithole

    2016-08-01

    Full Text Available This article assesses the impact of the Assisted Education Programme (AEP in developing, improving human capital and productivity specifically for eThekwini Municipality employee human resource. This programme offers funding to employees to further their studies in higher learning institutions, which are in partnership with and recognized by eThekwini Municipality. The core function of this programme is to improve and develop employee capabilities in order to enhance municipal productivity. However, different factors have prohibited the programme from reaching required funding polity objectives. Participants filled in questionnaires and from them data were collected. The study used quantitative research as a method of research. The target population for this study consisted of 100 participants. The study sample size were 64 participants which were randomly selected out of the Durban Solid Waste Unit, specifically general assistants. The study analyzed data using SPSS (version 23.0. A significant percentage of respondents indicated to a lack of transparency and poor consistency in the process of awarding the funding and to insufficient information, which detailed the criteria for eligibility of applicants. Henceforth, the study concluded that municipal employee underutilized the AEP because of being ill informed about it. This resulted in the employee perception that the programme had little or no benefit to them and that it had no value in improving their human capital development. This finding is shown by a Chi-square goodness of fit test to be statistically significant (std=1.49150; mean=2.7500; p=.000

  19. Resummation improved rapidity spectrum for gluon fusion Higgs production

    International Nuclear Information System (INIS)

    Ebert, Markus A.; Tackmann, Frank J.; Michel, Johannes K.L.; Muenster Univ.

    2017-02-01

    Gluon-induced processes such as Higgs production typically exhibit large perturbative corrections. These partially arise from large virtual corrections to the gluon form factor, which at timelike momentum transfer contains Sudakov logarithms evaluated at negative arguments ln 2 (-1)=-π 2 . It has been observed that resumming these terms in the timelike form factor leads to a much improved perturbative convergence for the total cross section. We discuss how to consistently incorporate the resummed form factor into the perturbative predictions for generic cross sections differential in the Born kinematics, including in particular the Higgs rapidity spectrum. We verify that this indeed improves the perturbative convergence, leading to smaller and more reliable perturbative uncertainties, and that this is not affected by cancellations between resummed and unresummed contributions. Combining both fixed-order and resummation uncertainties, the perturbative uncertainty for the total cross section at N 3 LO+N 3 LL φ ' is about a factor of two smaller than at N 3 LO. The perturbative uncertainty of the rapidity spectrum at NNLO+NNLL φ ' is similarly reduced compared to NNLO. We also study the analogous resummation for quark-induced processes, namely Higgs production through bottom quark annihilation and the Drell-Yan rapidity spectrum. For the former the resummation leads to a small improvement, while for the latter it confirms the already small uncertainties of the fixed-order predictions.

  20. Work improvement by computerizing the process of shielding block production

    International Nuclear Information System (INIS)

    Kang, Dong Hyuk; Jeong, Do Hyeong; Kang, Dong Yoon; Jeon, Young Gung; Hwang, Jae Woong

    2013-01-01

    Introducing CR (Computed Radiography) system created a process of printing therapy irradiation images and converting the degree of enlargement. This is to increase job efficiency and contribute to work improvement using a computerized method with home grown software to simplify this process, work efficiency. Microsoft EXCEL (ver. 2007) and VISUAL BASIC (ver. 6.0) have been used to make the software. A window for each shield block was designed to enter patients' treatment information. Distances on the digital images were measured, the measured data were entered to the Excel program to calculate the degree of enlargement, and printouts were produced to manufacture shield blocks. By computerizing the existing method with this program, the degree of enlargement can easily be calculated and patients' treatment information can be entered into the printouts by using macro function. As a result, errors in calculation which may occur during the process of production or errors that the treatment information may be delivered wrongly can be reduced. In addition, with the simplification of the conversion process of the degree of enlargement, no copy machine was needed, which resulted in the reduction of use of paper. Works have been improved by computerizing the process of block production and applying it to practice which would simplify the existing method. This software can apply to and improve the actual conditions of each hospital in various ways using various features of EXCEL and VISUAL BASIC which has already been proven and used widely

  1. Work improvement by computerizing the process of shielding block production

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dong Hyuk; Jeong, Do Hyeong; Kang, Dong Yoon; Jeon, Young Gung; Hwang, Jae Woong [Proton Therapy Center, National Cancer Center, Goyang (Korea, Republic of)

    2013-09-15

    Introducing CR (Computed Radiography) system created a process of printing therapy irradiation images and converting the degree of enlargement. This is to increase job efficiency and contribute to work improvement using a computerized method with home grown software to simplify this process, work efficiency. Microsoft EXCEL (ver. 2007) and VISUAL BASIC (ver. 6.0) have been used to make the software. A window for each shield block was designed to enter patients' treatment information. Distances on the digital images were measured, the measured data were entered to the Excel program to calculate the degree of enlargement, and printouts were produced to manufacture shield blocks. By computerizing the existing method with this program, the degree of enlargement can easily be calculated and patients' treatment information can be entered into the printouts by using macro function. As a result, errors in calculation which may occur during the process of production or errors that the treatment information may be delivered wrongly can be reduced. In addition, with the simplification of the conversion process of the degree of enlargement, no copy machine was needed, which resulted in the reduction of use of paper. Works have been improved by computerizing the process of block production and applying it to practice which would simplify the existing method. This software can apply to and improve the actual conditions of each hospital in various ways using various features of EXCEL and VISUAL BASIC which has already been proven and used widely.

  2. Urine: Waste product or biologically active tissue?

    Science.gov (United States)

    2018-03-01

    Historically, urine has been viewed primarily as a waste product with little biological role in the overall health of an individual. Increasingly, data suggest that urine plays a role in human health beyond waste excretion. For example, urine might act as an irritant and contribute to symptoms through interaction with-and potential compromise of-the urothelium. To explore the concept that urine may be a vehicle for agents with potential or occult bioactivity and to discuss existing evidence and novel research questions that may yield insight into such a role, the National Institute of Diabetes and Digestive and Kidney Disease invited experts in the fields of comparative evolutionary physiology, basic science, nephrology, urology, pediatrics, metabolomics, and proteomics (among others) to a Urinology Think Tank meeting on February 9, 2015. This report reflects ideas that evolved from this meeting and current literature, including the concept of urine quality, the biological, chemical, and physical characteristics of urine, including the microbiota, cells, exosomes, pH, metabolites, proteins, and specific gravity (among others). Additionally, the manuscript presents speculative, and hopefully testable, ideas about the functional roles of urine constituents in health and disease. Moving forward, there are several questions that need further understanding and pursuit. There were suggestions to consider actively using various animal models and their biological specimens to elaborate on basic mechanistic information regarding human bladder dysfunction. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

  3. Results-driven approach to improving quality and productivity

    Science.gov (United States)

    John Dramm

    2000-01-01

    Quality control (QC) programs do not often realize their full potential. Elaborate and expensive QC programs can easily get side tracked by the process of building a program with promises of “Someday, this will all pay off.” Training employees in QC methods is no guarantee that quality will improve. Several documented cases show that such activity-centered efforts...

  4. Kaizen - continuous improvement of high voltage products; Kaizen - kontinuierliche Verbesserung bei Hochspannungsprodukten

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, M. [ABB Calor Emag Schaltanlagen AG, Hanau-Grossauheim (Germany); Goessmann, T. [ABB Calor Emag Schaltanlagen AG, Mannheim (Germany)

    1999-07-12

    In the actual global competition only the company can survive who cares for the continuous improvement of all business activities. The ABB Calor Emag Schaltanlagen AG at his production site in Hanau-Grossauheim has installed a specific improvement programm called KVP what is based on the ideas of Kaizen. Aim is the improvement of processes, mainly in production, concerning quality, dates, costs and environment by activating all colleagues. (orig.) [Deutsch] Im heutigen globalen Wettbewerb kann sich nur der behaupten, der sich kontinuierlich in allen Unternehmensbereichen weiterentwickelt. Die ABB Calor Emag Schaltanlagen AG hat in ihrem Werk Hanau-Grossauheim nach den Ideen des Kaizen ein werkspezifisches Programm zur kontinuierlichen Verbesserung der Prozesse in der Fertigung eingefuehrt. Ziel ist die stetige Verbesserung von Fertigungsparametern, wie Qualitaet, Termine, Kosten und Umwelt unter Einbeziehung aller Mitarbeiter. (orig.)

  5. Characterization of traditional production systems of sugarcane for panela and some prospects for improving their sustainability

    Directory of Open Access Journals (Sweden)

    Joaquín Guillermo Ramírez Gil

    2017-01-01

    Full Text Available Sugarcane used for the production of “panela” (unrefined cane sugar is a crop of great importance for Colombia’s rural economy. Additionally, it serves a fundamental role in the food security and sovereignty of the Colombian population and daily consumption. However, the small production system presents problems of sustainability, as a direct consequence of its technological arrears and loss of interest in this crop. In this study, a characterization of 30 small productive units located in three municipalities in Antioquia was performed with the objective of identifying the problems associated with this production system and stablish the causes associated with loss of area dedicated to this crop in the study area. The results demonstrate that in the region of study, this production system and its associated agro-industry have problems associated with low technological level, poor infrastructure, deficient agro-industry processing and low levels of associativity and marketing. This situation has generated a low economic solvency for the farmers, leading many to abandon this activity and migrate towards other economic sectors. The findings of this study indicate the need to reengineer this production system, for which they could make technological adaptations that improve productivity and product quality and generate added value. On the other hand, must the rural countryside attractive to avoid the loss of labor and make young people become interested in this economic activity. As strategies to improve productivity, we suggest the effective use of information technologies, improve rural living conditions, increase associativity and value added, involve the consumer in the production chain and design development policies for the entire chain of value.

  6. Improvement of Productivity in TIG Welding Plant by Equipment Design in Orbit

    Science.gov (United States)

    Gnanavel, C.; Saravanan, R.; Chandrasekaran, M.; Jayakanth, J. J.

    2017-03-01

    Measurements and improvements are very indispensable task at all levels of management. Here some samples are, at operator level: Measuring operating parameters to ensure OEE (Overall Equipment Effectiveness) and measuring Q components performance to ensure quality, at supervisory level: measuring operator’s performance to ensure labour utility at managerial level: production and productivity measurements and at top level capital and capacity utilization. An often accepted statement is “Improvement is impossible without measurement”. Measurements often referred as observation. The case study was conducted at Government Boiler factory in India. The scientific approach followed for indentifying non value added activities. Personalised new equipment designed and installed to achieve productivity improvement of 85% for a day. The new equipment can serve 360o around its axis hence it simplified loading and unloading procedures as well as reduce their times and ensured effective space and time.

  7. Cisgenic Barley with Improved Phytase Activity

    DEFF Research Database (Denmark)

    Holme, Inger; Dionisio, Giuseppe; Brinch-Pedersen, Henrik

    2010-01-01

    barley lambda library has been used to isolate the genomic clone of this phytase including 2.3 kb of the promoter region and 600 bp of the terminator region. The clone has been inserted into a cisgenic Agrobacterium vector where both the gene of interest and the selection gene are flanked by their own T......-DNA borders in order to promote integration of the two genes at unlinked places in the plant genome. Transformed T0 plants show increases in the phytase activity of mature seeds from 1,400 in wild type to 8,950 FTU/kg in T0 plants. T1 plants of each transformant are currently screened with PCR for extra...... copies of the genomic phytase gene and the selection gene to identify segregation between the two genes. Presently, we have identified two cisgenic T1 plants without vector backbone and selection gene but with an extra copy of the genomic phytase gene....

  8. Cisgenic barley with improved phytase activity

    DEFF Research Database (Denmark)

    Holme, Inger; Dionisio, Giuseppe; Brinch-Pedersen, Henrik

    2010-01-01

    barley lambda library has been used to isolate the genomic clone of this phytase including 2.3 kb of the promoter region and 600 bp of the terminator region. The clone has been inserted into a cisgenic Agrobacterium vector where both the gene of interest and the selection gene are flanked by their own T......-DNA borders in order to promote integration of the two genes at unlinked places in the plant genome. Transformed T0 plants show increases in the phytase activity of mature seeds from 1,400 in wild type to 8,950 FTU/kg in T0 plants. T1 plants of each transformant are currently screened with PCR for extra...... copies of the genomic phytase gene and the selection gene to identify segregation between the two genes. Presently, we have identified two cisgenic T1 plants without vector backbone and selection gene but with an extra copy of the genomic phytase gene....

  9. Improved Ant Colony Optimization for Seafood Product Delivery Routing Problem

    Directory of Open Access Journals (Sweden)

    Baozhen Yao

    2014-02-01

    Full Text Available This paper deals with a real-life vehicle delivery routing problem, which is a seafood product delivery routing problem. Considering the features of the seafood product delivery routing problem, this paper formulated this problem as a multi-depot open vehicle routing problem. Since the multi-depot open vehicle routing problem is a very complex problem, a method is used to reduce the complexity of the problem by changing the multi-depot open vehicle routing problem into an open vehicle routing problem with a dummy central depot in this paper. Then, ant colony optimization is used to solve the problem. To improve the performance of the algorithm, crossover operation and some adaptive strategies are used. Finally, the computational results for the benchmark problems of the multi-depot vehicle routing problem indicate that the proposed ant colony optimization is an effective method to solve the multi-depot vehicle routing problem. Furthermore, the computation results of the seafood product delivery problem from Dalian, China also suggest that the proposed ant colony optimization is feasible to solve the seafood product delivery routing problem.

  10. Powerplant productivity improvement study: policy analysis and incentive assessment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    Policy options that the Illinois Commerce Commission might adopt in order to promote improved power plant productivity for existing units in Illinois are identified and analyzed. These policy options would generally involve either removing existing disincentives and/or adding direct incentives through the regulatory process. The following activities are reported: in-depth review of existing theoretical and empirical literature in the areas of power plant reliability, regulatory utility efficiency and performance incentives, and impacts of various regulatory mechanisms such as the Fuel Adjustment Clauses on productivity; contacts with other state public utility commissions known to be investigating or implementing productivity improvement incentive mechanisms; documentation and analysis of incentive mechanisms adopted or under consideration in other states; analysis of current regulatory practice in Illinois as it relates to power plant productivity incentives and disincentives; identification of candidate incentive mechanisms for consideration by the Illinois Commerce Commission; and analysis and evaluation of these candidates. 72 references, 8 figures.

  11. Improvements in Production of Single-Walled Carbon Nanotubes

    Science.gov (United States)

    Balzano, Leandro; Resasco, Daniel E.

    2009-01-01

    A continuing program of research and development has been directed toward improvement of a prior batch process in which single-walled carbon nanotubes are formed by catalytic disproportionation of carbon monoxide in a fluidized-bed reactor. The overall effect of the improvements has been to make progress toward converting the process from a batch mode to a continuous mode and to scaling of production to larger quantities. Efforts have also been made to optimize associated purification and dispersion post processes to make them effective at large scales and to investigate means of incorporating the purified products into composite materials. The ultimate purpose of the program is to enable the production of high-quality single-walled carbon nanotubes in quantities large enough and at costs low enough to foster the further development of practical applications. The fluidized bed used in this process contains mixed-metal catalyst particles. The choice of the catalyst and the operating conditions is such that the yield of single-walled carbon nanotubes, relative to all forms of carbon (including carbon fibers, multi-walled carbon nanotubes, and graphite) produced in the disproportionation reaction is more than 90 weight percent. After the reaction, the nanotubes are dispersed in various solvents in preparation for end use, which typically involves blending into a plastic, ceramic, or other matrix to form a composite material. Notwithstanding the batch nature of the unmodified prior fluidized-bed process, the fluidized-bed reactor operates in a continuous mode during the process. The operation is almost entirely automated, utilizing mass flow controllers, a control computer running software specific to the process, and other equipment. Moreover, an important inherent advantage of fluidized- bed reactors in general is that solid particles can be added to and removed from fluidized beds during operation. For these reasons, the process and equipment were amenable to

  12. Research reactor management. Safety improvement activities in HANARO

    International Nuclear Information System (INIS)

    Wu, Jong-Sup; Jung, Hoan-Sung; Hong, Sung Taek; Ahn, Guk-Hoon

    2012-01-01

    Safety activities in HANARO have been continuously conducted to enhance its safe operation. Great effort has been placed on a normalization and improvement of the safety attitude of the regular staff and other employees working at the reactor and other experimental facilities. This paper introduces the activities on safety improvement that were performed over the last few years. (author)

  13. Forms and Methods of Agricultural Sector Innovative Activity Improvement

    Directory of Open Access Journals (Sweden)

    Aisha S. Ablyaeva

    2013-01-01

    Full Text Available The article is focused on basic forms and methods to improve the efficiency of innovative activity in the agricultural sector of Ukraine. It was determined that the development of agriculture in Ukraine is affected by a number of factors that must be considered to design innovative models of entrepreneurship development and ways to improve the efficiency of innovative entrepreneurship activity.

  14. Improving texture optimization with application to visualizing meat products

    DEFF Research Database (Denmark)

    Clemmensen, Line Katrine Harder; Laursen, Lasse Farnung

    2011-01-01

    When inspecting food quality, CT Scanning is among the primary tools used to gain insight. It provides valuable volumetric data using a process, which leaves the product unspoiled and untouched. However, volumetric data is merely a measure of density and therefore contains no appearance information...... et al. in 2007. This method accepts a number of 2D input exemplars, from which it generates a solid texture volume. The volume is iteratively improved via an expectation maximization algorithm. The bottleneck of Texture Optimization occurs during a nearest neighbor search, between texture patches...

  15. Serial CSTR digester configuration for improving biogas production from manure

    DEFF Research Database (Denmark)

    Boe, Kanokwan; Angelidaki, Irini

    2009-01-01

    distribution ratio of 80/20 and 90/10, and total HRT of 15 days. The results showed that the serial CSTR could obtain 11% higher biogas yield compared to the single CSTR. The increased biogas yield in the serial CSTR was mainly from the second reactor, which accounted for 16% and 12% of total biogas yield......A new configuration of manure digesters for improving biogas production has been investigated in laboratory scale. A single thermophilic continuous-flow stirred tank reactor (CSTR) operated with a hydraulic retention time (HRT) of 15 days was compared to a serial CSTR configuration with volume...

  16. Current activities on safety improvement at Ukrainian NPPs

    International Nuclear Information System (INIS)

    Stovbun, V.V.

    2000-01-01

    This report describes general development status of the national programs on safety improvement of the Ukrainian NPPs, basic approaches adopted for planning and implementation of safety improvement works, and state of implementation of principal technical activities aimed at safety improvement of Ukrainian NPPs. (author)

  17. Improvements in productivity at paid work and within the household, and increased participation in daily activities after 24 weeks of certolizumab pegol treatment of patients with psoriatic arthritis: results of a phase 3 double-blind randomised placebo-controlled study

    Science.gov (United States)

    Kavanaugh, A; Gladman, D; van der Heijde, D; Purcaru, O; Mease, P

    2015-01-01

    Objectives To evaluate the effect of certolizumab pegol (CZP) on productivity outside and within the home, and on participation in family, social and leisure activities in adult patients with psoriatic arthritis (PsA). Methods RAPID-PsA (NCT01087788) is a phase 3, double-blind, placebo-controlled trial. 409 patients with active PsA were randomised 1:1:1 to placebo, CZP 200 mg every 2 weeks (Q2W) or CZP 400 mg every 4 weeks (Q4W). The arthritis-specific Work Productivity Survey (WPS) assessed the impact of PsA on paid work and household productivity, and participation in social activities during the preceding month. WPS responses were compared between treatment arms using a non-parametric bootstrap-t method. Results At baseline, 56.6%, 60.1% and 61.5% of placebo, CZP 200 mg Q2W and CZP 400 mg Q4W patients were employed. By week 24, employed CZP patients reported an average of 1.0–1.8 and 3.0–3.9 fewer days of absenteeism and presenteeism, respectively, per month compared with 1.0 and 0.3 fewer days for placebo patients (pproductivity or days lost for participation in family, social and leisure activities. Improvements with CZP were seen as early as week 4 and continued to week 24. Conclusions CZP treatment significantly improved productivity at paid work and within the home, and resulted in greater participation in social activities for PsA patients. Trial registration number NCT01087788. PMID:24942382

  18. Evaluating and Directions for Improving the Efficiency of Use of the Main Production Assets of Enterprise

    Directory of Open Access Journals (Sweden)

    Chumak Larysa F.

    2017-04-01

    Full Text Available The article is aimed at studying the existing approaches to evaluation, as well as analyzing and determining the relevant directions for improving the efficiency of use of the enterprise’s main production assets. The article explores the issues such as development of the theoretical-methodical approaches to evaluating and improving the efficiency of use, finding practical ways and forms to implement innovations and upgrade the main production assets. It has been found that ensuring the efficient use of the main production assets goes along with application of technical, organizational-productive and organizational-administrative activities that are not only related to the technical side of the use, but also require the involvement and training of highly qualified professionals capable of providing with the appropriate productivity a high level of all the types of the work needed. The introduction of modern achievements in the sphere of management automation, production, advanced technologies, and the development of an optimal structure of the main assets would improve the efficiency of use of the main production assets.

  19. Biological treatment of chicken feather waste for improved biogas production

    Institute of Scientific and Technical Information of China (English)

    Gergely Forgács; Saeid Alinezhad; Amir Mirabdollah; Elisabeth Feuk-Lagerstedt; Ilona Sárvári Horwáth

    2011-01-01

    A two-stage system was developed which combines the biological degradation of keratin-rich waste with the production of biogas.Chicken feather waste was treated biologically with a recombinant Bacillus megaterium strain showing keratinase activity prior to biogas production.Chopped,autoclaved chicken feathers (4%,W/V) were completely degraded,resulting in a yellowish fermentation broth with a level of 0.51 mg/mL soluble proteins after 8 days of cultivation of the recombinant strain.During the subsequent anaerobic batch digestion experiments,methane production of 0.35 Nm3/kg dry feathers (i.e.,0.4 Nm3/kg volatile solids of feathers),corresponding to 80% of the theoretical value on proteins,was achieved from the feather hydrolyzates,independently of the prehydrolysis time period of 1,2 or 8 days.Cultivation with a native keratinase producing strain,Bacillus licheniformis resulted in only 0.25 mg/mL soluble proteins in the feather hydrolyzate,which then was digested achieving a maximum accumulated methane production of 0.31 Nm3/kg dry feathers.Feather hydrolyzates treated with the wild type B.megaterium produced 0.21 Nm3 CH4/kg dry feathers as maximum yield.

  20. Greenhouse gas emissions in milk and dairy product chains: Improving the carbon footprint of dairy products

    Energy Technology Data Exchange (ETDEWEB)

    Flysjoe, A.M.

    2012-11-01

    The present PhD project has focused on some of the most critical methodological aspects influencing GHG emission estimates of milk and dairy products and how the methodology can be improved. In addition, the Carbon Footprint (CF) for different types of dairy products has been analysed. Based on these results, mitigation options have been identified along the entire dairy value chain. The key methodological challenges analysed in the present study are: estimation of CH{sub 4} and N{sub 2}O emissions, assessment of CO{sub 2} emissions from land use change (LUC), co-product handling, and definition of the functional unit. Estimates of the biogenic emissions CH{sub 4} and N{sub 2}O are associated with large uncertainties due to the complexity and natural variation in biological processes. Accounting for these variations resulted in a {+-}30-50% variation in the CF for milk in Sweden and New Zealand (excluding emissions from LUC). The inclusion of emissions from LUC can drastically affect the CF of dairy products, and different models can even provide contradictory results. Thus, it is suggested that emissions associated with LUC are reported separately and that underlying assumptions are clearly explained. Accounting for the by-product beef is decisive for the CF of milk, and when designing future strategies for the dairy sector, milk and meat production needs to be addressed in an integrated approach. It is shown that an increase in milk yield per cow does not necessarily result in a lower CF of milk, when taking into account the alternative production of the by-product beef. This demonstrates that it is important to investigate interactions between different product chains, i.e. to apply system thinking. The CF of dairy products from Arla Foods analysed in the present study range from: 1.2-5.5 kg CO{sub 2}e per kg fresh dairy products, 7.3-10.9 kg CO{sub 2}e per kg butter and butter blends, 4.5-9.9 kg CO{sub 2}e per kg cheese, and 1.0-17.4 kg CO{sub 2}e per kg milk

  1. Greenhouse gas emissions in milk and dairy product chains: Improving the carbon footprint of dairy products

    Energy Technology Data Exchange (ETDEWEB)

    Flysjoe, A M

    2012-11-01

    The present PhD project has focused on some of the most critical methodological aspects influencing GHG emission estimates of milk and dairy products and how the methodology can be improved. In addition, the Carbon Footprint (CF) for different types of dairy products has been analysed. Based on these results, mitigation options have been identified along the entire dairy value chain. The key methodological challenges analysed in the present study are: estimation of CH{sub 4} and N{sub 2}O emissions, assessment of CO{sub 2} emissions from land use change (LUC), co-product handling, and definition of the functional unit. Estimates of the biogenic emissions CH{sub 4} and N{sub 2}O are associated with large uncertainties due to the complexity and natural variation in biological processes. Accounting for these variations resulted in a {+-}30-50% variation in the CF for milk in Sweden and New Zealand (excluding emissions from LUC). The inclusion of emissions from LUC can drastically affect the CF of dairy products, and different models can even provide contradictory results. Thus, it is suggested that emissions associated with LUC are reported separately and that underlying assumptions are clearly explained. Accounting for the by-product beef is decisive for the CF of milk, and when designing future strategies for the dairy sector, milk and meat production needs to be addressed in an integrated approach. It is shown that an increase in milk yield per cow does not necessarily result in a lower CF of milk, when taking into account the alternative production of the by-product beef. This demonstrates that it is important to investigate interactions between different product chains, i.e. to apply system thinking. The CF of dairy products from Arla Foods analysed in the present study range from: 1.2-5.5 kg CO{sub 2}e per kg fresh dairy products, 7.3-10.9 kg CO{sub 2}e per kg butter and butter blends, 4.5-9.9 kg CO{sub 2}e per kg cheese, and 1.0-17.4 kg CO{sub 2}e per kg milk

  2. Improvement of nutritional quality and antioxidant activities of yeast ...

    African Journals Online (AJOL)

    African Journal of Biotechnology ... This study evaluated the potential use and improves the health beneficial properties of the soybean waste manufacturing products by solid-state fermentation of six GRAS ... Key words: Solid state fermentation, yeast, waste soybean manufacturing products, antioxidant, protein, fiber.

  3. Synthetic analogs of anoplin show improved antimicrobial activities

    DEFF Research Database (Denmark)

    Munk, Jens; Uggerhøj, Lars Erik; Poulsen, Tanja Juul

    2013-01-01

    We present the antimicrobial and hemolytic activities of the decapeptide anoplin and 19 analogs thereof tested against methicillin-resistant Staphylococcus aureus ATCC 33591 (MRSA), Escherichia coli (ATCC 25922), Pseudomonas aeruginosa (ATCC 27853), vancomycin-resistant Enterococcus faecium (ATCC...... that increasing the charge and/or hydrophobicity improves antimicrobial activity and increases hemolytic activity. For each strain tested, we identify at least six anoplin analogs with an improved therapeutic index compared with anoplin, the only exception being Enterococcus faecium, against which only few...

  4. Trapping truffle production in holes: a promising technique for improving production and unravelling truffle life cycle

    Directory of Open Access Journals (Sweden)

    Claude Murat

    2016-10-01

    Full Text Available The Périgord black truffle, Tuber melanosporum Vittad., is an ectomycorrhizal fungus that forms edible hypogeous ascomata. It is now harvested in plantations and is recognized as an agricultural product by European policy. Empirical techniques without scientific demonstration of their efficiency are often used to improve the production of truffles in plantations. One of these techniques is “truffle trapping” which consists in practicing holes inside the potential productive area and to fill them with a substrate containing ascospores. We report an experiment in a truffle orchard where 784 holes were set under 196 trees. Two years after the installation of the holes, 95% of the truffles were found inside the holes corresponding to only 5% of the productive area. This study confirms the efficiency of this empirical technique and demonstrates new ways for in situ studies of the truffle life cycle.

  5. Improved productivity justifies world record underbalanced perforating operation

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, A. M.; Bakker, E. R. [NAM B.V. (Netherlands); Hungerford, K.

    1998-12-31

    To achieve vertical connectivity with all the layers, and thus long term sustained productivity in a highly stratified reservoir, a one run underbalanced perforating operation was considered necessary. Due to coiled tube limitations in this deep (5136 m along hole, 3700 m true vertical depth, with a maximum deviation of 89 degrees), high pressure well a hydraulic workover unit (HWU) was selected to deploy and retrieve the guns. The operation is considered a world record since this is the longest section (total gross interval of 1026 m perforated) of guns conveyed, fired underbalanced and deployed out of a live well. It is concluded that the improved productivity more than justified the additional time, effort and expenditure; considering the full life cycle of the well it is readily apparent that the operation was an economic and technical success. Details of the considerations leading to the perforating technique selection, the planning and the execution of the operation, and the validation of the technique in terms of productivity gains, are provided. 13 refs., 7 figs.

  6. Strategies for the improvement of rural chicken production in Ghana

    International Nuclear Information System (INIS)

    Awuni, J.A.

    2002-01-01

    Rural poultry production systems in Ghana and in Africa as a whole are based on the scavenging indigenous domestic fowl (Gallus domesticus), the predominant species in the poultry sector. In most African countries scavenging chicken have no regular health control programmes, may or may not have shelter and usually have to scavenge around for their nutritional requirements. In Ghana, the total poultry population is estimated to be over 20 million with 80% of this being rural scavenging chicken. Out of this population, 80% is lost annually due to outbreaks of Newcastle disease and a number of other causes. Reported here are the results of field surveys conducted in the wet and dry seasons in two selected ecological zones (Forest and Coastal) to establish the constraints to improvement of rural chicken production in the country. The survey covered only women farmers who engaged in rural poultry production. During the course of the survey, chicken flocks as well as chicken houses were examined for ectoparasites. Faecal samples were collected for laboratory diagnosis of endo-parasite infestation, as well as serum samples for analysis of antibodies using immunoassay techniques. The survey revealed that Newcastle disease still remains the most important disease of the scavenging rural chickens. (author)

  7. LIVE/DEAD YEAST VIABILITY STAINING AS A TOOL FOR IMPROVING ARTISANAL PILSNER BEER PRODUCTION

    Directory of Open Access Journals (Sweden)

    Benedetta Bottari

    2014-10-01

    Full Text Available The production of an artisanal beer, made by brewers using traditional practices on a small scale, is founded on the empirical adjustment of parameters, including yeasts handling and serial repitching. The aim of this study was to monitor yeast viability during different stages of artisanal beer productions through the Live/Dead Yeast viability staining and to correlate it with fermentation dynamics in order to increase process standardization and to maintain the quality of final products. Yeast viability and fermentation activities were evaluated during seven fermentation cycles of an artisanal pilsner beer. Yeast inoculated with higher viability performed generally better in fermentation, resulting in faster sugar consumption, faster ethanol production and stability. Handling yeast and serial repitching based on Live/Dead viability measurements, could be the key way to ensure reliable manufacture of high quality beer and to improve process standardization particularly for microbreweries, where variability of production can be a challenging point.

  8. INNOVATIVE RESERVES OF LABOR PRODUCTIVITY IMPROVE IN NATIONAL ENTERPRISES OF SUGAR INDUSTRY

    Directory of Open Access Journals (Sweden)

    T. Kostenko

    2015-06-01

    Full Text Available Overcoming the innovative inertia and effective use of innovative reserves of labor productivity increase in domestic sugar factories is an important step towards the revival of strategically important sector for Ukraine’s economy and the key to its future development in the long run. The aim of the article is to search and study of innovative reserves of labor productivity increase in domestic enterprises of sugar industry. The international experience of innovation implementing in sugar industry enterprises is studied. The paper proves that management innovation is innovative reserves of labor productivity improve in the domestic sugar enterprises. The study analyzes overall trends of innovation development and dynamics of labor productivity in the sugar factories of Ukraine during the period of 2003-2013. The benefits and risks of laboratory tests of sugar beets and sugar are overviewed for the optimal technological mode of production installation on terms of outsourcing. The necessity and economic effectiveness of laboratory research outsourcing is proved to create the optimal technological mode of sugar production. It will improve labor productivity and quality of sugar, increase production and develop new profitable activities of sugar industry enterprises.

  9. Active Learning and Teaching: Improving Postsecondary Library Instruction.

    Science.gov (United States)

    Allen, Eileen E.

    1995-01-01

    Discusses ways to improve postsecondary library instruction based on theories of active learning. Topics include a historical background of active learning; student achievement and attitudes; cognitive development; risks; active teaching; and instructional techniques, including modified lectures, brainstorming, small group work, cooperative…

  10. Sustaining Competitiveness Through product Development Activities Within Malaysian Automotive Suppliers

    Directory of Open Access Journals (Sweden)

    Norizah Mohamad

    2012-01-01

    Full Text Available The local automotive suppliers are facing a number of important challenges such asglobalisation, new requirement in market specifications and the competition brought about by theAsean Free Trade Area (AFTA agreements. In an effort to enhance the competitiveness of themanufacturing sector, the government has implemented the Second Industrial Master Plan, IMP2(1996-2005. The focus of the IMP2 is more on innovation and applications of new technologies, sothat industries can move up the value chain of their activities. Innovative capabilities achieved fromcompanies’ new product development activities have been recognized to be crucial for companies tosustain their competitiveness and organisational success. The importance of product development ismost obvious in the context of the discussion on the competitiveness of the Malaysian automotivesuppliers. The study will focus on the small medium enterprises (SMEs that make up more than 60 %of these automotive suppliers. The study is to determine the extensiveness of the suppliers’ productdevelopment activities by examining the involvement of the suppliers in customer’s productdevelopment activities. Consequently, the impact of this involvement to the competitiveness of thesuppliers is examined. The results were established based from a survey to parts and componentssuppliers of Proton, the Malaysian car national assembler. The study has shown that the SMEs wereinvolved from the early stages of the product development process that is during the design stage. Theproduct development efforts have shown to contribute towards increasing firms’ market share andfirms were also able to gain a better understanding of future product demand. A significant number ofthe suppliers have managed to penetrate the export market. Unfortunately, among the respondents,there is only one system supplier. This indicates that, either the technological capabilities of theSMEs still needed upgrading for the requirement as

  11. Application of the Toyota Production System improves core laboratory operations.

    Science.gov (United States)

    Rutledge, Joe; Xu, Min; Simpson, Joanne

    2010-01-01

    To meet the increased clinical demands of our hospital expansion, improve quality, and reduce costs, our tertiary care, pediatric core laboratory used the Toyota Production System lean processing to reorganize our 24-hour, 7 d/wk core laboratory. A 4-month, consultant-driven process removed waste, led to a physical reset of the space to match the work flow, and developed a work cell for our random access analyzers. In addition, visual controls, single piece flow, standard work, and "5S" were instituted. The new design met our goals as reflected by achieving and maintaining improved turnaround time (TAT; mean for creatinine reduced from 54 to 23 minutes) with increased testing volume (20%), monetary savings (4 full-time equivalents), decreased variability in TAT, and better space utilization (25% gain). The project had the unanticipated consequence of eliminating STAT testing because our in-laboratory TAT for routine testing was less than our prior STAT turnaround goal. The viability of this approach is demonstrated by sustained gains and further PDCA (Plan, Do, Check, Act) improvements during the 4 years after completion of the project.

  12. Production, optimization, characterization and antifungal activity of ...

    African Journals Online (AJOL)

    SAM

    2014-04-02

    Apr 2, 2014 ... the present study, the antifungal activity of crude A. terrus chitinase was investigated against Apergillus niger, Aspergillus oryzae .... Chitinase activity was determined spectrophotometrically by estimating the amount of ..... characterization of two. Bifunctional chitinases lysozyme extracellularly produced by.

  13. Inventory Management Strategies For Productivity Improvement In Equipment Manufacturing Firms

    Directory of Open Access Journals (Sweden)

    T.T Amachree

    2017-08-01

    Full Text Available This study examined and developed Inventory Management Strategies IMS which could be creatively employed for Productivity Improvement in Equipment Firms PIEMF Equipment manufacturing projects suffer from declining productivity and inability to effectively satisfy customized order batch quantity within schedules budgeted cost and quality specifications due to lack of robust and well defined IMS as well as none code classification of vast number of inventory item. Survey and expost-facto research designs were adopted on the four identified IMS in three EMF. The method used for primary data collection and measurement on four IMS and inventory management parameters was questionnaire modelled into likert five point scale from the target respondents being experts in the subject matter. The secondary data was obtained from the computerised inventory status file of the three equipment manufacturing firms. The methods of primary data analysis and test of research used were Pearsons product moment correlation coefficient and oneway. Analysis of variance ANOVA computer software via Statistical Program for Social Science SPSS version 17 ABC analysis and classification of materials was used for code categorization of secondary data also with the aid of Microsoft excel. The results of the analyses highlighted and isolated A class of inventory items which are 137 out of 543 for Siemens Nig. Ltd 154 out of 551 for Dresser-Rand Nig. Ltd and 162 of 551 for Nigerian Engineering Works Ltd. The results of Pearson product moment correlation analysis and test of research hypotheses indicate that Materials Requirements Planning MRP followed by Supply Chain Management SCM are the most significant IMS as they correlate strongly with PIEMF. The study recommends IMS adoption by code classification of materials in which MRP or SCM could be deployed for management of A class of inventories while classical IMS could be used for management B and C classes of inventory items.

  14. Bioenergy and biofertilizer : improvement of biogas production from filter cake

    Energy Technology Data Exchange (ETDEWEB)

    Fonte, A.H. [Environmental Bioremediation Group, Research and Development Agency, GeoCuba, Camaguey (Cuba); Alvarez, R.C. [Provincial Direction of Soils, Camaguey (Cuba)

    2000-07-01

    The anaerobic digestion of sugar mill filter cake (SMFC) was studied using a natural zeolite to intensify the biogas production. The anaerobic digestion (AD) of agricultural waste mixtures in certain proportions is the underlying basis of biogas generation. Earlier studies have shown that certain inert materials can act as stimulators in biogas production when used in conjunction with AD. This study involved three experiments using filter cake from different sugar mills using three doses of zeolite to determine how they stimulate biogas production. Another objective of the study was to determine if the mud of the digester containing the added zeolite has an impact on plants and soil. The study was conducted under glass house conditions using a brown soil with carbonates with neutral pH and high contents of P{sub 2}O{sub 5}, K{sub 2}O and organic matter. It was concluded that it is possible to increase the biogas yield and to improve AD behaviour of the filter cake by using a zeolite adapted to unique operating conditions. The amount of yield depends on the origin of the filter cake, the stimulator dose and age. Results were in the order of 20-40 per cent biogas production. Fresh filter cake was found to produce more biogas. The mud of the anaerobic digestion of the filter cake containing zeolite positively impacted on the agronomic behaviour of the sorghum in relation to P{sub 2}O{sub 5}, K{sub 2}O and organic matter content. 19 refs., 4 tabs.

  15. Merging Satellite Precipitation Products for Improved Streamflow Simulations

    Science.gov (United States)

    Maggioni, V.; Massari, C.; Barbetta, S.; Camici, S.; Brocca, L.

    2017-12-01

    Accurate quantitative precipitation estimation is of great importance for water resources management, agricultural planning and forecasting and monitoring of natural hazards such as flash floods and landslides. In situ observations are limited around the Earth, especially in remote areas (e.g., complex terrain, dense vegetation), but currently available satellite precipitation products are able to provide global precipitation estimates with an accuracy that depends upon many factors (e.g., type of storms, temporal sampling, season, etc.). The recent SM2RAIN approach proposes to estimate rainfall by using satellite soil moisture observations. As opposed to traditional satellite precipitation methods, which sense cloud properties to retrieve instantaneous estimates, this new bottom-up approach makes use of two consecutive soil moisture measurements for obtaining an estimate of the fallen precipitation within the interval between two satellite overpasses. As a result, the nature of the measurement is different and complementary to the one of classical precipitation products and could provide a different valid perspective to substitute or improve current rainfall estimates. Therefore, we propose to merge SM2RAIN and the widely used TMPA 3B42RT product across Italy for a 6-year period (2010-2015) at daily/0.25deg temporal/spatial scale. Two conceptually different merging techniques are compared to each other and evaluated in terms of different statistical metrics, including hit bias, threat score, false alarm rates, and missed rainfall volumes. The first is based on the maximization of the temporal correlation with a reference dataset, while the second is based on a Bayesian approach, which provides a probabilistic satellite precipitation estimate derived from the joint probability distribution of observations and satellite estimates. The merged precipitation products show a better performance with respect to the parental satellite-based products in terms of categorical

  16. Productivity improvement in the production line with lean manufacturing approach: case study PT. XYZ

    Directory of Open Access Journals (Sweden)

    diah Halimatussa’

    2018-01-01

    Full Text Available The increaseing productivity is one of the competitive strategies that can be applied in a company in order to survive in an intense competitive presure. PT. XYZ is a textile industry manufacturing golf gloves and caddy bag. Every day, the company has a production target of 600 pieces per line. However, the desired target is not achieved that it will affect the delay in delivery of products to customers. In this research, a case study on implementing value stream mapping and Kaizen as the lean manufacturing concept is reported. The purpose of this study is to map the current production line, analyse and design the future value stream mapping by eliminating waste occured. It is obtained a lead time reduction as much as 440.4 seconds through eliminating 17 non-value added activities. Then, the output can be increased up to 21% which is equal to 502 pieces.

  17. Quality and productivity improvement program (PPKP) from alumni perspective

    Science.gov (United States)

    Ruza, Nadiah; Mustafa, Zainol

    2013-04-01

    Defining the quality of the university education system is not easy. Institutions of higher education, through curriculum are hoped to provide the knowledge, wisdom and personality of students. It is questionable of how far Quality and Productivity Improvement Program (PPKP) are capable to ensure the courses offered relevant and effective in preparing the students for job market. The effectiveness of a university to undertake responsibilities and the impact given to students even after they graduate can be a measure of education quality at university. So, the quality of education can be enhanced and improved from time to time. In general, this study is aims to determine the effectiveness of PPKP's education system from the perspective of their alumni as well as their satisfaction and the importance level based on how PPKP be able to meet their needs. In overall, summary of open-ended questions from the questionnaire, Importance-Performance analysis and correlation analysis were conducted for this study. Based on result, it appears that there are still some deficiencies that can be improve, particularly in terms of teaching skills and PPKP's relationships with external organizations to enable knowledge be channel effectively. Importance-Performance analysis highlights some topics or courses that should be offered by PPKP based on their importance in industrial practice. Summary of the results of correlation analysis was found that women are more positive and not too demanding compared to men. In addition, it is found that the responsibilities and workload of the older generations, higher income and a high level of experience demands them to use and practice what they have learned during their studies at PPKP. Results of this study are hoped could be used to improve the quality of education system at PPKP.

  18. Benthic Light Availability Improves Predictions of Riverine Primary Production

    Science.gov (United States)

    Kirk, L.; Cohen, M. J.

    2017-12-01

    Light is a fundamental control on photosynthesis, and often the only control strongly correlated with gross primary production (GPP) in streams and rivers; yet it has received far less attention than nutrients. Because benthic light is difficult to measure in situ, surrogates such as open sky irradiance are often used. Several studies have now refined methods to quantify canopy and water column attenuation of open sky light in order to estimate the amount of light that actually reaches the benthos. Given the additional effort that measuring benthic light requires, we should ask if benthic light always improves our predictions of GPP compared to just open sky irradiance. We use long-term, high-resolution dissolved oxygen, turbidity, dissolved organic matter (fDOM), and irradiance data from streams and rivers in north-central Florida, US across gradients of size and color to build statistical models of benthic light that predict GPP. Preliminary results on a large, clear river show only modest model improvements over open sky irradiance, even in heavily canopied reaches with pulses of tannic water. However, in another spring-fed river with greater connectivity to adjacent wetlands - and hence larger, more frequent pulses of tannic water - the model improved dramatically with the inclusion of fDOM (model R2 improved from 0.28 to 0.68). River shade modeling efforts also suggest that knowing benthic light will greatly enhance our ability to predict GPP in narrower, forested streams flowing in particular directions. Our objective is to outline conditions where an assessment of benthic light conditions would be necessary for riverine metabolism studies or management strategies.

  19. Improving biogas production from anaerobic co-digestion of Thickened Waste Activated Sludge (TWAS) and fat, oil and grease (FOG) using a dual-stage hyper-thermophilic/thermophilic semi-continuous reactor.

    Science.gov (United States)

    Alqaralleh, Rania Mona; Kennedy, Kevin; Delatolla, Robert

    2018-07-01

    This paper investigates the feasibility and advantages of using a dual-stage hyper-thermophilic/thermophilic semi-continuous reactor system for the co-digestion of Thickened Waste Activated Sludge (TWAS) and Fat, Oil and Grease (FOG) to produce biogas in high quantity and quality. The performance of the dual-stage hyper-thermophilic (70°C)/thermophilic (55°C) anaerobic co-digestion system is evaluated and compared to the performance of a single-stage thermophilic (55°C) reactor that was used to co-digest the same FOG-TWAS mixtures. Both co-digestion reactors were compared to a control reactor (the control reactor was a single-stage thermophilic reactor that only digested TWAS). The effect of FOG% in the co-digestion mixture (based on total volatile solids) and the reactor hydraulic retention time (HRT) on the biogas/methane production and the reactors' performance were thoroughly investigated. The FOG% that led to the maximum methane yield with a stable reactor performance was determined for both reactors. The maximum FOG% obtained for the single-stage thermophilic reactor at 15 days HRT was found to be 65%. This 65% FOG resulted in 88.3% higher methane yield compared to the control reactor. However, the dual-stage hyper-thermophilic/thermophilic co-digestion reactor proved to be more efficient than the single-stage thermophilic co-digestion reactor, as it was able to digest up to 70% FOG with a stable reactor performance. The 70% FOG in the co-digestion mixture resulted in 148.2% higher methane yield compared to the control at 15 days HRT. 70% FOG (based on total volatile solids) is so far the highest FOG% that has been proved to be useful and safe for semi-continuous reactor application in the open literature. Finally, the dual-stage hyper-thermophilic/thermophilic co-digestion reactor also proved to be efficient and stable in co-digesting 40% FOG mixtures at lower HRTs (i.e., 9 and 12 days) and still produce high methane yields and Class A effluents

  20. Antifouling Activity of Marine Natural Products

    KAUST Repository

    Qian, Pei-Yuan; Xu, Sharon Ying

    2012-01-01

    for marine industries. Marine natural products have been considered as one of the most promising sources of antifouling compounds in recent years. In antifouling compound screening processes, bioassay systems often play most critical/vital roles in screening

  1. Production, optimization, characterization and antifungal activity of ...

    African Journals Online (AJOL)

    Aspergillus terrus was found to be a good chitinase producer among the five fungi ... The high level of chitinase production was observed in the culture medium ... A. terrus chitinase was investigated against Apergillus niger, Aspergillus oryzae, ...

  2. Process improvements for enhanced productivity of PHWR garter springs

    International Nuclear Information System (INIS)

    Srinivasula Reddy, S.; Tonpe, Sunil; Saibaba, N.; Jayaraj, R.N.

    2009-01-01

    Full text: In Pressurised Heavy Water Reactors (PHWR), Garter springs are used as spacers between the coolant tube and calandria tube. Garter springs are made from Zirconium alloy containing 2.5 % Niobium and 0.5% copper. The springs are basically manufactured by coiling a wire of cross section 1.7 mm x 1.0 mm, which is produced by series of drawing and swaging operations using hot extruded rods of 19 mm diameter. The manufacturing process also involves heat treatment and chemical cleaning operations at appropriate stages. It is required to ensure that the life of springs against parameters like hydrogen pickup, residual stresses and low stiffness is improved at the manufacturing stage itself by improving manufacturing process. The impact of above problems on spring life and process improvements is briefly discussed. The critical factor affecting the garter spring performance in PHWR Reactor is mainly hydrogen. The life limiting factors for garter springs are the problems arising out of high total hydrogen content, which depends on the hydrogen pickup during reactor operation. This phenomenon can happen during the reactor operation, as springs are prone to pick-up hydrogen in the reactor environment. Hence acceptable hydrogen content for the springs is specified as 25 ppm (max.). Garter spring is susceptible to hydrogen pick-up during various production processes, which make material brittle and difficult for fabrication process such as wire drawing and coiling. By studying and optimizing the process parameters of spring manufacturing, the hydrogen pick-up of springs is brought down from 70 ppm to a level of 20 ppm. Garter springs are provided with a hook at each end to enable its assembly to coolant tube in the reactor. The hook portion is very critical in maintaining the integrity of the spring. It is desirable to have the hook portion relieved of all residual stresses. For this purpose manufacturing process has been modified and solutionising was introduced as

  3. Co-ordinating Product Developing Activities

    DEFF Research Database (Denmark)

    Terkelsen, Søren Bendix

    1996-01-01

    The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature......The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature...

  4. Biochar amendment improves soil fertility and productivity of mulberry plant

    Directory of Open Access Journals (Sweden)

    Faruque Ahmed

    2017-07-01

    Full Text Available Biochar has the potential to improve soil fertility and crop productivity. A field experiment was carried out at the experimental field of Bangladesh Sericulture Research and Training Institute (BSRTI, Rajshahi, Bangladesh. The objective of this study was to examine the effect of biochar on soil properties, growth, yield and foliar disease incidence of mulberry plant. The study consisted of 6 treatments: control, basal dose of NPK, rice husk biochar, mineral enriched biochar, basal dose + rice husk biochar and basal dose + mineral enriched biochar. Growth parameters such as node/meter, total branch number/plant, total leaf yield/hectare/year were significantly increased in basal dose + mineral enriched biochar treated plot in second year compared with the other fertilizer treatments. In second year, the total leaf yield/hectare/year were also 142.1% and 115.9% higher in combined application of basal dose + mineral enriched biochar and basal dose + rice husk biochar, respectively, than the control treatment. The soil properties such as organic matter, phosphorus, sulphur and zinc percentage were significantly increased with both the (mineral enriched and rice husk biochar treated soil applied with or without recommended basal dose of NPK than the control and only the recommended basal dose of NPK, respectively. Further, the lowest incidences of tukra (6.4%, powdery mildew (10.4% and leaf spot (7.6% disease were observed in second year under mineral enriched biochar treated plot than the others. The findings revealed that utilization of biochar has positive effect on the improvement of soil fertility and productivity as well as disease suppression of mulberry plant.

  5. Bacon Production: Evaluating Potential Processing and Management Practices to Improve Product Quality of Industrial Sliced Bacon

    Science.gov (United States)

    Scramlin, Stacy Maurine

    2009-01-01

    The objective of this research was to determine areas of improvement to bacon production. The first trial was conducted to determine differences in belly and bacon quality traits in pigs fed ractopamine (RAC) for various durations during finishing. A 2x3x2 factorial arrangement was used with barrows and gilts, fed RAC levels of 0.0, 5.0, or 7.4…

  6. Are students' impressions of improved learning through active learning methods reflected by improved test scores?

    Science.gov (United States)

    Everly, Marcee C

    2013-02-01

    To report the transformation from lecture to more active learning methods in a maternity nursing course and to evaluate whether student perception of improved learning through active-learning methods is supported by improved test scores. The process of transforming a course into an active-learning model of teaching is described. A voluntary mid-semester survey for student acceptance of the new teaching method was conducted. Course examination results, from both a standardized exam and a cumulative final exam, among students who received lecture in the classroom and students who had active learning activities in the classroom were compared. Active learning activities were very acceptable to students. The majority of students reported learning more from having active-learning activities in the classroom rather than lecture-only and this belief was supported by improved test scores. Students who had active learning activities in the classroom scored significantly higher on a standardized assessment test than students who received lecture only. The findings support the use of student reflection to evaluate the effectiveness of active-learning methods and help validate the use of student reflection of improved learning in other research projects. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. CLAES Product Improvement by use of GSFC Data Assimilation System

    Science.gov (United States)

    Kumer, J. B.; Douglass, Anne (Technical Monitor)

    2001-01-01

    Recent development in chemistry transport models (CTM) and in data assimilation systems (DAS) indicate impressive predictive capability for the movement of airparcels and the chemistry that goes on within these. This project was aimed at exploring the use of this capability to achieve improved retrieval of geophysical parameters from remote sensing data. The specific goal was to improve retrieval of the CLAES CH4 data obtained during the active north high latitude dynamics event of 18 to 25 February 1992. The model capabilities would be used: (1) rather than climatology to improve on the first guess and the a-priori fields, and (2) to provide horizontal gradients to include in the retrieval forward model. The retrieval would be implemented with the first forward DAS prediction. The results would feed back to the DAS and a second DAS prediction for first guess, a-priori and gradients would feed to the retrieval. The process would repeat to convergence and then proceed to the next day.

  8. The Impact of Activity Based Working (ABW on Workplace Activity, Eating Behaviours, Productivity, and Satisfaction

    Directory of Open Access Journals (Sweden)

    Lauren Arundell

    2018-05-01

    Full Text Available The redesign of the physical workplace according to activity-based working (ABW principles has potential to influence employee health and workplace outcomes. This natural experiment examined changes in accelerometer-derived workplace activity, self-reported eating behaviours, productivity, workplace satisfaction before (March to November 2014 and six to nine months after moving to an ABW workplace compared to a comparison workplace (n = 146 at baseline (56% ABW, aged 40.1 ± 8.5 years, 72% female. Interviews were also conducted with 21 ABW participants. Between- and within-group differences were examined and mixed model analysis examined intervention effects over time. Effect sizes were calculated on change scores (Cohen’s d. Although not statistically significant, ABW participants had meaningful improvements in workday sedentary time, light-, and moderate-to-vigorous intensity physical activity, job satisfaction and relationship with co-workers (d = 0.379–0.577, and small declines in productivity (d = 0.278. There were significant, meaningful, and beneficial intervention effects on perceived organisational support for being active in the workplace, frequency of eating lunch with colleagues, and satisfaction with the physical environment in ABW compared to comparison participants (d = 0.501–0.839. Qualitative data suggested that ABW employees associated ABW with greater opportunities for movement and collaboration, but had mixed views on the impact on productivity. Future research with larger samples and over longer follow-up periods is warranted.

  9. The Impact of Activity Based Working (ABW) on Workplace Activity, Eating Behaviours, Productivity, and Satisfaction.

    Science.gov (United States)

    Arundell, Lauren; Sudholz, Bronwyn; Teychenne, Megan; Salmon, Jo; Hayward, Brooke; Healy, Genevieve N; Timperio, Anna

    2018-05-17

    The redesign of the physical workplace according to activity-based working (ABW) principles has potential to influence employee health and workplace outcomes. This natural experiment examined changes in accelerometer-derived workplace activity, self-reported eating behaviours, productivity, workplace satisfaction before (March to November 2014) and six to nine months after moving to an ABW workplace compared to a comparison workplace ( n = 146 at baseline (56% ABW, aged 40.1 ± 8.5 years, 72% female). Interviews were also conducted with 21 ABW participants. Between- and within-group differences were examined and mixed model analysis examined intervention effects over time. Effect sizes were calculated on change scores (Cohen's d ). Although not statistically significant, ABW participants had meaningful improvements in workday sedentary time, light-, and moderate-to-vigorous intensity physical activity, job satisfaction and relationship with co-workers ( d = 0.379⁻0.577), and small declines in productivity ( d = 0.278). There were significant, meaningful, and beneficial intervention effects on perceived organisational support for being active in the workplace, frequency of eating lunch with colleagues, and satisfaction with the physical environment in ABW compared to comparison participants ( d = 0.501⁻0.839). Qualitative data suggested that ABW employees associated ABW with greater opportunities for movement and collaboration, but had mixed views on the impact on productivity. Future research with larger samples and over longer follow-up periods is warranted.

  10. Dietary manipulations for improving productivity in ruminant livestock

    International Nuclear Information System (INIS)

    Beever, D.E.

    1989-01-01

    Against a background of the major aspects of forage utilization by the rumen ecosystem and host animal metabolism, the need to manipulate the nature of the diet in order to improve animal productivity is reviewed. A number of criteria by which possible dietary manipulants should be considered are provided. The role of feed additives to manipulate rumen fermentation characteristics with respect to volatile fatty acid production, suppression of methanogenesis, and stimulation of microbial protein synthesis is discussed, and the possible benefits of changing the rumen microflora (e.g. by defaunation) are considered. The potential of nitrogen, energy and specific amino acid supplements to enhance rumen fermentation and/or nutrient absorption is examined and the paper concludes with consideration of possible areas where dietary manipulation could be beneficial, but to date suitable technology has not been satisfactorily developed. In this context, the nutritional effect of tannins, including enhancement of pronutritional and diminution of antinutritional factors, the suppression of rumen proteolysis and the ruminal protection of starch are examined. (author). 74 refs, 1 tab

  11. Lean production of taste improved lipidic sodium benzoate formulations.

    Science.gov (United States)

    Eckert, C; Pein, M; Breitkreutz, J

    2014-10-01

    Sodium benzoate is a highly soluble orphan drug with unpleasant taste and high daily dose. The aim of this study was to develop a child appropriate, individually dosable, and taste masked dosage form utilizing lipids in melt granulation process and tableting. A saliva resistant coated lipid granule produced by extrusion served as reference product. Low melting hard fat was found to be appropriate as lipid binder in high-shear granulation. The resulting granules were compressed to minitablets without addition of other excipients. Compression to 2mm minitablets decreased the dissolved API amount within the first 2 min of dissolution from 33% to 23%. The Euclidean distances, calculated from electronic tongue measurements, were reduced, indicating an improved taste. The reference product showed a lag time in dissolution, which is desirable for taste masking. Although a lag time was not achieved for the lipidic minitablets, drug release in various food materials was reduced to 2%, assuming a suitable taste masking for oral sodium benzoate administration. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Stingless bees further improve apple pollination and production

    Directory of Open Access Journals (Sweden)

    Blandina Felipe Viana

    2014-10-01

    Full Text Available The use of Africanised honeybee (Apis mellifera scutellata Lepeletier hives to increase pollination success in apple orchards is a widespread practice. However, this study is the first to investigate the number of honeybee hives ha-1 required to increase the production of fruits and seeds as well as the potential contribution of the stingless bee Mandaçaia (Melipona quadrifasciata anthidioides Lepeletier. We performed tests in a 43-ha apple orchard located in the municipality of Ibicoara (13º24’50.7’’S and 41º17’7.4’’W in Chapada Diamantina, State of Bahia, Brazil. In 2011, fruits from the Eva variety set six seeds on average, and neither a greater number of hives (from 7 to 11 hives ha-1 nor a greater number of pollen collectors at the honeybee hives displayed general effects on the seed number. Without wild pollinators, seven Africanised honeybee hives ha-1 with pollen collectors is currently the best option for apple producers because no further increase in the seed number was observed with higher hive densities. In 2012, supplementation with both stingless bees (12 hives ha-1 and Africanised honeybees (7 hives ha-1 provided higher seed and fruit production than supplementation with honeybees (7 hives ha-1 alone. Therefore, the stingless bee can improve the performance of honeybee as a pollinator of apple flowers, since the presence of both of these bees results in increases in apple fruit and seed number.

  13. Improving Productivity in Building Construction – by Repetitions in Products, Processes, and Organisations

    DEFF Research Database (Denmark)

    Bekdik, Baris

    This thesis builds on several studies with connection to the lack of productivity in build-ing construction. It seeks to enhance the conditions for improving productivity in the fragmented building construction industry, by exploring how a modular thinking of products, processes and organisations...... can be reapplied on new building construction projects. Complexity theory is used for diagnosis and modularity theory for the remedy towards the high degree of complexity, which is seen as the root of unproductivity. De-sign Research Methodology is followed to structure and organise the different...... from the practitioner’s perspective. In the second part of the exploratory study, examples of the fragmented kinds of modu-lar applications around the world are compiled in order to demonstrate the inconsistent use, but still universal appeal that the approach carries with respect to building construc-tion...

  14. Extended lactations may improve cow health, productivity and reduce greenhouse gas emissions from organic dairy production

    DEFF Research Database (Denmark)

    Lehmann, Jesper Overgård; Mogensen, Lisbeth; Kristensen, Troels

    2014-01-01

    The concept of extended lactation is a break with the tradition of getting one calf per cow per year that should improve cow health, increase productivity and reduce greenhouse gas (GHG) emission per kg milk produced in high-yield organic dairy herds. These effects are achieved through fewer...... calvings per year and hence a production of fewer replacement heifers, which, in combination with fewer days dry per cow per year, will reduce the annual herd requirement for feed. Total herd feed use is a major determinant of GHG emission at farm gate. However, these effects also rely on the assumption...... calves and fewer culled cows will be available for sale. An on-going project at Aarhus University aims at characterising those cows that can maintain milk production through an extended lactation, and it aims at estimating the overall herd effect of this concept on farm profitability and GHG emission per...

  15. Improvements in crop water productivity increase water sustainability and food security—a global analysis

    International Nuclear Information System (INIS)

    Brauman, Kate A; Foley, Jonathan A; Siebert, Stefan

    2013-01-01

    Irrigation consumes more water than any other human activity, and thus the challenges of water sustainability and food security are closely linked. To evaluate how water resources are used for food production, we examined global patterns of water productivity—food produced (kcal) per unit of water (l) consumed. We document considerable variability in crop water productivity globally, not only across different climatic zones but also within climatic zones. The least water productive systems are disproportionate freshwater consumers. On precipitation-limited croplands, we found that ∼40% of water consumption goes to production of just 20% of food calories. Because in many cases crop water productivity is well below optimal levels, in many cases farmers have substantial opportunities to improve water productivity. To demonstrate the potential impact of management interventions, we calculated that raising crop water productivity in precipitation-limited regions to the 20th percentile of productivity would increase annual production on rainfed cropland by enough to provide food for an estimated 110 million people, and water consumption on irrigated cropland would be reduced enough to meet the annual domestic water demands of nearly 1.4 billion people. (letter)

  16. How do Australian Small and Medium Enterprises Communicate their Environmental Improvement Activities Online?

    Directory of Open Access Journals (Sweden)

    Craig Parker

    2011-03-01

    Full Text Available There have been calls in the IS/eBusiness literature for research on "green" IS/IT in a Small and Medium Enterprises (SMEs context. The Corporate Social Responsibility (CSR literature has neglected the issue of how SMEs can use websites to communicate their environmental improvement activities. This paper links these two previously separate disciplines by reporting on a content analysis of 443 Australian SME websites from four industry sectors to identify if and how they use websites to communicate their environmental improvement activities. The study found that 47 websites were communicating such activities in some form. A detailed analysis was undertaken of these 47 websites to identify emergent themes relating to how these SMEs were communicating their environmental improvement activities. These themes resulted in a reconceptualisation of the traditional "4 Ps" of marketing for online communication of environmental improvement activities by SMEs: profile; product; process and prominence.

  17. Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

    Science.gov (United States)

    Koptev, V. Yu

    2017-02-01

    The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

  18. Improvement of Escherichia coli production strains by modification of the phosphoenolpyruvate:sugar phosphotransferase system

    Directory of Open Access Journals (Sweden)

    Gosset Guillermo

    2005-05-01

    Full Text Available Abstract The application of metabolic engineering in Escherichia coli has resulted in the generation of strains with the capacity to produce metabolites of commercial interest. Biotechnological processes with these engineered strains frequently employ culture media containing glucose as the carbon and energy source. In E. coli, the phosphoenolpyruvate:sugar phosphotransferase system (PTS transports glucose when this sugar is present at concentrations like those used in production fermentations. This protein system is involved in phosphoenolpyruvate-dependent sugar transport, therefore, its activity has an important impact on carbon flux distribution in the phosphoenolpyruvate and pyruvate nodes. Furthermore, PTS has a very important role in carbon catabolite repression. The properties of PTS impose metabolic and regulatory constraints that can hinder strain productivity. For this reason, PTS has been a target for modification with the purpose of strain improvement. In this review, PTS characteristics most relevant to strain performance and the different strategies of PTS modification for strain improvement are discussed. Functional replacement of PTS by alternative phosphoenolpyruvate-independent uptake and phosphorylation activities has resulted in significant improvements in product yield from glucose and productivity for several classes of metabolites. In addition, inactivation of PTS components has been applied successfully as a strategy to abolish carbon catabolite repression, resulting in E. coli strains that use more efficiently sugar mixtures, such as those obtained from lignocellulosic hydrolysates.

  19. A Study on Improving Logistics in a Production Enterprise in the Automotive Domain

    Science.gov (United States)

    Muntean, A.; Inţă, M.; Stroilă, I. A.

    2016-11-01

    In order to remain on the market and to overcome competition, companies need to develop and implement a strategy of continuous improvement. This is based on customer satisfaction needs, management based on realities and respect for people. In order to meet market requirements global road Faurecia Company uses a system called "Faurecia Excellence System", a system that promotes continuous improvement. FES system controls all activities of Faurecia, from research and development to sales including production and company functions and implements all 114 main procedures. This paper examines the current activity and introduce the new methods to improve manufacturing processes. These new methods are based on some fundamental concepts, namely: a high level of stocks blocks resources and can mask other problems decreasing visibility and communication; product quality is essential and the goods must be produced only when needed using Kanban principle. Additional expenditure with purchased raw materials regarding storage until they are needed, identification and packaging for storage, inventory costs were reduced using a JIT based principle in purchasing.Thus, the paper proposes reorganizing production by reducing the level of stocks using JIT principle and production time. The application made in software Arena refers to simulating the fabrication process to reduce throughput time.

  20. Biotechnological Strategies to Improve Plant Biomass Quality for Bioethanol Production

    Directory of Open Access Journals (Sweden)

    Julián Mario Peña-Castro

    2017-01-01

    Full Text Available The transition from an economy dependent on nonrenewable energy sources to one with higher diversity of renewables will not be a simple process. It requires an important research effort to adapt to the dynamics of the changing energy market, sort costly processes, and avoid overlapping with social interest markets such as food and livestock production. In this review, we analyze the desirable traits of raw plant materials for the bioethanol industry and the molecular biotechnology strategies employed to improve them, in either plants already under use (as maize or proposed species (large grass families. The fundamentals of these applications can be found in the mechanisms by which plants have evolved different pathways to manage carbon resources for reproduction or survival in unexpected conditions. Here, we review the means by which this information can be used to manipulate these mechanisms for commercial uses, including saccharification improvement of starch and cellulose, decrease in cell wall recalcitrance through lignin modification, and increase in plant biomass.

  1. Biotechnological Strategies to Improve Plant Biomass Quality for Bioethanol Production

    Science.gov (United States)

    del Moral, Sandra; Núñez-López, Lizeth; Barrera-Figueroa, Blanca E.; Amaya-Delgado, Lorena

    2017-01-01

    The transition from an economy dependent on nonrenewable energy sources to one with higher diversity of renewables will not be a simple process. It requires an important research effort to adapt to the dynamics of the changing energy market, sort costly processes, and avoid overlapping with social interest markets such as food and livestock production. In this review, we analyze the desirable traits of raw plant materials for the bioethanol industry and the molecular biotechnology strategies employed to improve them, in either plants already under use (as maize) or proposed species (large grass families). The fundamentals of these applications can be found in the mechanisms by which plants have evolved different pathways to manage carbon resources for reproduction or survival in unexpected conditions. Here, we review the means by which this information can be used to manipulate these mechanisms for commercial uses, including saccharification improvement of starch and cellulose, decrease in cell wall recalcitrance through lignin modification, and increase in plant biomass. PMID:28951875

  2. Prevention Research Matters-Communities Working to Improve Physical Activity

    Centers for Disease Control (CDC) Podcasts

    2018-02-15

    We know that children who are physically active every day are less likely to develop chronic diseases as adults, including obesity. Dr. Sandy Slater, a researcher with the University of Illinois, Chicago Prevention Research Center, discusses how a park improvement project in Chicago helped engage communities to improve areas for play and activity.  Created: 2/15/2018 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 2/15/2018.

  3. Pathway engineering of Enterobacter aerogenes to improve acetoin production by reducing by-products formation.

    Science.gov (United States)

    Jang, Ji-Woong; Jung, Hwi-Min; Im, Dae-Kyun; Jung, Moo-Young; Oh, Min-Kyu

    2017-11-01

    Enterobacter aerogenes was metabolically engineered for acetoin production. To remove the pathway enzymes that catalyzed the formation of by-products, the three genes encoding a lactate dehydrogenase (ldhA) and two 2,3-butanediol dehydrogenases (budC, and dhaD), respectively, were deleted from the genome. The acetoin production was higher under highly aerobic conditions. However, an extracellular glucose oxidative pathway in E. aerogenes was activated under the aerobic conditions, resulting in the accumulation of 2-ketogluconate. To decrease the accumulation of this by-product, the gene encoding a glucose dehydrogenase (gcd) was also deleted. The resulting strain did not produce 2-ketogluconate but produced significant amounts of acetoin, with concentration reaching 71.7g/L with 2.87g/L/h productivity in fed-batch fermentation. This result demonstrated the importance of blocking the glucose oxidative pathway under highly aerobic conditions for acetoin production using E. aerogenes. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Role of C5 Activation Products in Sepsis

    Directory of Open Access Journals (Sweden)

    Peter A. Ward

    2010-01-01

    Full Text Available Complement activation products are known to be generated in the setting of both experimental and human sepsis. C5 activation products (C5a anaphylatoxin and the membrane attack complex [MAC] C5b-9 are generated during sepsis following infusion of endotoxin, or after cecal ligation and puncture (CLP, which produces polymicrobial sepsis. C5a reacts with its receptors C5aR and C5L2 in a manner that creates the “cytokine storm”, and is associated with development of multiorgan failure (MOF. A number of other complications arising from the interaction of C5a with its receptors include apoptosis of lymphoid cells, loss of innate immune functions of neutrophils (PMNs, polymorphonuclear leukocytes, cardiomyopathy, disseminated intravascular coagulation, and complications associated with MOF. Neutralization of C5a in vivo or absence/blockade of C5a receptors greatly reduces the adverse events in the setting of sepsis, markedly attenuates MOF, and greatly improves survival. Regarding the possible role of C5b-9 in sepsis, the literature is conflicting. Some studies suggest that C5b-9 is protective, while other studies suggest the contrary. Clearly, in human sepsis, C5a and its receptors may be logical targets for interception.

  5. Use of Pressure Activation in Food Quality Improvement.

    Science.gov (United States)

    Shigematsu, Toru

    2015-01-01

    Beside intensive studies on inactivation microorganisms by high hydrostatic pressure (HP) for food storage, pressure effects on property of food materials have also been studied based on knowledge in pressure effect on biomolecules. Pressure effects on biological membranes and mass transfer in cellular biological materials and on enzyme activity would give an idea that HP treatment can introduce two types of activations into food materials: improved mass transfer and enzyme activity. Studies focusing on these pressure activations on food materials were then reviewed. Rice flour with an exclusively fine mean particle size and small starch damage was obtained due to improved water absorption properties and/or enzyme activity by HP. HP treatment increased of free amino acids and γ-aminobutyric acid (GABA) in rice and soybeans due to improved proteolysis and amino acid metabolism. Improvement of antioxidant activity and alteration of polyphenolic-compounds composition in food materials were also demonstrated by HP treatment. The HP-induced activations on food materials could contribute towards processing technologies for food quality improvement.

  6. Improved Pig Production and Performance in the Tropics | Enem ...

    African Journals Online (AJOL)

    Pig production can yield relatively rapid rate of economic return on capital due to the ... of production, housing, feeding, health, and product marketing were discussed to enable a prospective pig farmer have a wonderful return on investment.

  7. Increase in work productivity of depressed individuals with improvement in depressive symptom severity.

    Science.gov (United States)

    Trivedi, Madhukar H; Morris, David W; Wisniewski, Stephen R; Lesser, Ira; Nierenberg, Andrew A; Daly, Ella; Kurian, Benji T; Gaynes, Bradley N; Balasubramani, G K; Rush, A John

    2013-06-01

    The authors sought to identify baseline clinical and sociodemographic characteristics associated with work productivity in depressed outpatients and to assess the effect of treatment on work productivity. Employed depressed outpatients 18-75 years old who completed the Work Productivity and Activity Impairment scale (N=1,928) were treated with citalopram (20-40 mg/day) in the Sequenced Treatment Alternatives to Relieve Depression study. For patients who did not remit after an initial adequate antidepressant trial (level 1), either a switch to sertraline, sustained-release bupropion, or extended-release venlafaxine or an augmentation with sustained-release bupropion or buspirone was provided (level 2). Participants' clinical and demographic characteristics and treatment outcomes were analyzed for associations with baseline work productivity and change in productivity over time. Education, baseline depression severity, and melancholic, atypical, and recurrent depression subtypes were all independently associated with lower benefit to work productivity domains. During level 1 treatment, work productivity in several domains improved with reductions in depressive symptom severity. However, these findings did not hold true for level 2 outcomes; there was no significant association between treatment response and reduction in work impairment. Results were largely confirmed when multiple imputations were employed to address missing data. During this additional analysis, an association was also observed between greater impairment in work productivity and higher levels of anxious depression. Patients with clinically significant reductions in symptom severity during initial treatment were more likely than nonresponders to experience significant improvements in work productivity. In contrast, patients who achieved symptom remission in second-step treatment continued to have impairment at work. Patients who have demonstrated some degree of treatment resistance are more prone to

  8. Highly active vitrification plant remote handling operational experience and improvements

    International Nuclear Information System (INIS)

    Milgate, I.

    1996-01-01

    All the main process plant and equipment at the Sellafield Waste Vitrification Plant (WVP) is enclosed in heavily shielded concrete walled cells. There is a large quantity of relatively complex plant and equipment which must be remotely operated, maintained or replaced in-cell in a severe environment. The WVP has five in-cell polar cranes which are of modular construction to aid replacement of failed components. Each can be withdrawn into a shielded cell extension for decontamination and hands-on maintenance. The cells have a total of 80 through wall tube positions to receive Master Slave Manipulators (MSMs). The MSMs are used where possible for ''pick and place'' purposes but are often called upon to position substantial pieces of mechanical equipment and thus are subject to heavy loading and high failure rates. An inward flow of air is maintained in the active cells. The discharged air passes through a filter cell where remote damper operation filter changing and maintenance is carried out by means of a PAR3000 manipulator. A Nuclear Engineered Advanced Teleoperated Robot (Neater) swabs the vitrified product container to ensure cleanliness before storage. There is a significant arising of solid radioactive waste from replaced in-cell items which undergoes sorting and size reduction in a breakdown cell equipped with a large reciprocating saw and a hydraulic shear. Improvements to the remote handling facilities made in the light of operational experience are described. (UK)

  9. Improving coal mining production performance through the application of total production management

    Energy Technology Data Exchange (ETDEWEB)

    Emery, J.C. [Devman Consulting Pty Ltd. (Australia)

    1998-12-31

    This paper describes the application of the Total Productive Management (TPM) technique as a performance improvement initiative for a coal mining operation. It discusses the objectives of TPM, with the driver for improved production performance being the Overall Equipment Effectiveness (OEE) of the equipment or process, and with the development of ownership as the behavioral approach to equipment management and continuous improvement through cross-functional and area-based teams. It illustrates the concept of equipment management as defects management. The scope for application of TPM to the coal mining industry is immense. The harshness of the operating environment can be a major generator of equipment defects, and a current paradigm in the industry accepts these defects as an unavoidable outcome defining maintenance costs in this environment. However recent benchmarking studies have highlighted that maintenance costs per operating hour in some mining operations are more than double the vendor`s estimate of best practice. The paper refers to these studies which also compare maintenance costs of fixed and mobile plant and equipment to best practice outcomes in comparable process industries. The ultimate goal of any operating strategy must be to translate results to the bottom line through adding revenue from increased volume and quality of operations output, better safety performance, and reducing costs of production through lower operating and maintenance costs. These lower costs result from removal of defects generators, improved maintenance planning, and identification and reduction of hidden operating costs resulting from poor equipment maintenance. Finally the paper outlines the minesite procedures required for successful implementation of TPM to sustain these desired results for all stakeholders. 3 refs., 6 figs.

  10. Improvement in extracellular protease production by the marine antarctic yeast Rhodotorula mucilaginosa L7.

    Science.gov (United States)

    Chaud, Luciana C S; Lario, Luciana D; Bonugli-Santos, Rafaella C; Sette, Lara D; Pessoa Junior, Adalberto; Felipe, Maria das Graças de A

    2016-12-25

    Microorganisms from extreme and restrictive eco systems, such as the Antarctic continent, are of great interest due to their ability to synthesize products of commercial value. Among these, enzymes from psychrotolerant and psychrophilic microorganisms offer potential economical benefits due to their high activity at low and moderate temperatures. The cold adapted yeast Rhodotorula mucilaginosa L7 was selected out of 97 yeasts isolated from Antarctica as having the highest extracellular proteolytic activity in preliminary tests. The present study was aimed at evaluating the effects of nutrient composition (peptone, rice bran extract, ammonium sulfate, sodium chloride) and physicochemical parameters (temperature and pH) on its proteolytic activity. A 2 6-2 fractional factorial design experiment followed by a central composite design (CCD 2 3 ) was performed to optimize the culture conditions and improve the extracellular proteolytic activity. The results indicated that the presence of peptone in the medium was the most influential factor in protease production. Enzymatic activity was enhanced by the interaction between low glucose and peptone concentrations. The optimization of culture conditions with the aid of mathematical modeling enabled a c. 45% increase in proteolytic activity and at the same time reduced the amount of glucose and peptone required for the culture. Thus culture conditions established in this work may be employed in the biotechnological production of this protease. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Panorama 2009 - Exploration-production activities and markets

    International Nuclear Information System (INIS)

    2008-01-01

    After four years of heavy activity, growth on the upstream service and supply markets is slowing. At the end of 2008, the oil and gas price fell subsequent to the decline in demand for petroleum products. This is an indication that exploration-production activity will slow in 2009 and that the price of services - hence sales at service and supply companies - will drop

  12. Analysis of exploration expenditure for unconventional gas : how investing in exploration would improve reserves and production

    International Nuclear Information System (INIS)

    Virine, L.

    2010-01-01

    This paper described a method for analyzing the efficiency of exploration investment, which can improve corporate planning. Exploration expenditure is held to be a main indicator of economic activities in the oil and gas industry because exploration is supposed to lead to booking more reserves and increased production. A model was developed for analyzing the correlation between exploration expenditure and producer's reserves and production for conventional and unconventional gas plays in the United States. The model was used to quantitatively assess the exploration expenditures production and reserves of different producers for various conventional and unconventional gas plays. Producer's booked reserves, production from public sources, and reserves and production forecasts were incorporated into the model, which was used to analyze different types of exploration expenditure (land, drilling, and seismic) incurred at various times prior to reserves and production being booked. There was an overall positive correlation between exploration expenditure and reserves and production, but there was significant variance in the correlation between various producers operating in different plays. Unproved land acquisition was strongly correlated to the booking of proved reserves, but there was no correlation between unproved land acquisition and exploration expenditure ratio, reserves, or production. A number of companies had a high exploration expenditure to overall expenditure ratio, but the resulting payoffs were inconsistent. 6 refs., 1 tab., 6 figs.

  13. Improvement Strategies, Cost Effective Production, and Potential Applications of Fungal Glucose Oxidase (GOD): Current Updates.

    Science.gov (United States)

    Dubey, Manish K; Zehra, Andleeb; Aamir, Mohd; Meena, Mukesh; Ahirwal, Laxmi; Singh, Siddhartha; Shukla, Shruti; Upadhyay, Ram S; Bueno-Mari, Ruben; Bajpai, Vivek K

    2017-01-01

    Fungal glucose oxidase (GOD) is widely employed in the different sectors of food industries for use in baking products, dry egg powder, beverages, and gluconic acid production. GOD also has several other novel applications in chemical, pharmaceutical, textile, and other biotechnological industries. The electrochemical suitability of GOD catalyzed reactions has enabled its successful use in bioelectronic devices, particularly biofuel cells, and biosensors. Other crucial aspects of GOD such as improved feeding efficiency in response to GOD supplemental diet, roles in antimicrobial activities, and enhancing pathogen defense response, thereby providing induced resistance in plants have also been reported. Moreover, the medical science, another emerging branch where GOD was recently reported to induce several apoptosis characteristics as well as cellular senescence by downregulating Klotho gene expression. These widespread applications of GOD have led to increased demand for more extensive research to improve its production, characterization, and enhanced stability to enable long term usages. Currently, GOD is mainly produced and purified from Aspergillus niger and Penicillium species, but the yield is relatively low and the purification process is troublesome. It is practical to build an excellent GOD-producing strain. Therefore, the present review describes innovative methods of enhancing fungal GOD production by using genetic and non-genetic approaches in-depth along with purification techniques. The review also highlights current research progress in the cost effective production of GOD, including key advances, potential applications and limitations. Therefore, there is an extensive need to commercialize these processes by developing and optimizing novel strategies for cost effective GOD production.

  14. Active Listening Improve Your Ability to Listen and Lead

    CERN Document Server

    (CCL), Center for Creative Leadership

    2011-01-01

    Active listening is a person's willingness and ability to hear and understand. At its core, active listening is a state of mind that involves paying full and careful attention to the other person, avoiding premature judgment, reflecting understanding, clarifying information, summarizing, and sharing. By learning and committing to the skills and behaviors of active listening, leaders can become more effective listeners and, over time, improve their ability to lead.

  15. Modifying the Toyota Production System for continuous performance improvement in an academic children's hospital.

    Science.gov (United States)

    Stapleton, F Bruder; Hendricks, James; Hagan, Patrick; DelBeccaro, Mark

    2009-08-01

    The Toyota Production System (TPS) has become a successful model for improving efficiency and eliminating errors in manufacturing processes. In an effort to provide patients and families with the highest quality clinical care, our academic children's hospital has modified the techniques of the TPS for a program in continuous performance improvement (CPI) and has expanded its application to educational and research programs. Over a period of years, physicians, nurses, residents, administrators, and hospital staff have become actively engaged in a culture of continuous performance improvement. This article provides background into the methods of CPI and describes examples of how we have applied these methods for improvement in clinical care, resident teaching, and research administration.

  16. Performance in physiology evaluation: possible improvement by active learning strategies.

    Science.gov (United States)

    Montrezor, Luís H

    2016-12-01

    The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages interaction with their peers, and stimulates thinking about physiological mechanisms. This study examined the performance of medical students on physiology over four semesters with and without active engagement methodologies. Four activities were used: a puzzle, a board game, a debate, and a video. The results show that engaging in activities with active methodologies before a physiology cognitive monitoring test significantly improved student performance compared with not performing the activities. We integrate the use of these methodologies with classic lectures, and this integration appears to improve the teaching/learning process in the discipline of physiology and improves the integration of physiology with cardiology and neurology. In addition, students enjoy the activities and perform better on their evaluations when they use them. Copyright © 2016 The American Physiological Society.

  17. Sustainable production of biologically active molecules of marine based origin.

    Science.gov (United States)

    Murray, Patrick M; Moane, Siobhan; Collins, Catherine; Beletskaya, Tanya; Thomas, Olivier P; Duarte, Alysson W F; Nobre, Fernando S; Owoyemi, Ifeloju O; Pagnocca, Fernando C; Sette, L D; McHugh, Edward; Causse, Eric; Pérez-López, Paula; Feijoo, Gumersindo; Moreira, Ma T; Rubiolo, Juan; Leirós, Marta; Botana, Luis M; Pinteus, Susete; Alves, Celso; Horta, André; Pedrosa, Rui; Jeffryes, Clayton; Agathos, Spiros N; Allewaert, Celine; Verween, Annick; Vyverman, Wim; Laptev, Ivan; Sineoky, Sergei; Bisio, Angela; Manconi, Renata; Ledda, Fabio; Marchi, Mario; Pronzato, Roberto; Walsh, Daniel J

    2013-09-25

    The marine environment offers both economic and scientific potential which are relatively untapped from a biotechnological point of view. These environments whilst harsh are ironically fragile and dependent on a harmonious life form balance. Exploitation of natural resources by exhaustive wild harvesting has obvious negative environmental consequences. From a European industry perspective marine organisms are a largely underutilised resource. This is not due to lack of interest but due to a lack of choice the industry faces for cost competitive, sustainable and environmentally conscientious product alternatives. Knowledge of the biotechnological potential of marine organisms together with the development of sustainable systems for their cultivation, processing and utilisation are essential. In 2010, the European Commission recognised this need and funded a collaborative RTD/SME project under the Framework 7-Knowledge Based Bio-Economy (KBBE) Theme 2 Programme 'Sustainable culture of marine microorganisms, algae and/or invertebrates for high value added products'. The scope of that project entitled 'Sustainable Production of Biologically Active Molecules of Marine Based Origin' (BAMMBO) is outlined. Although the Union is a global leader in many technologies, it faces increasing competition from traditional rivals and emerging economies alike and must therefore improve its innovation performance. For this reason innovation is placed at the heart of a European Horizon 2020 Strategy wherein the challenge is to connect economic performance to eco performance. This article provides a synopsis of the research activities of the BAMMBO project as they fit within the wider scope of sustainable environmentally conscientious marine resource exploitation for high-value biomolecules. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Process improvement of knives production in a small scale industry

    Science.gov (United States)

    Ananto, Gamawan; Muktasim, Irfan

    2017-06-01

    dependency upon the operator's skill as well. The main conclusions are: the substitution of laser cut with wire cut machine for the first task (a) could reduce the operation time from 60 to 39.26 minutes with good result of surface quality and the truing process (b) could be omitted; the additional grinding fixture in beveling process (c) is required and two workstations have to be assigned instead of one as in previous condition. They lead to improvements including the guarantee of the uniformity of knifes' angle, the reduction on the operators' skills dependency, the shortening of cycle time from 855 to 420 minutes, and the higher number of productivity from 9 units/month into 20units/month.

  19. [Improvement of 2-mercaptoimidazoline analysis in rubber products containing chlorine].

    Science.gov (United States)

    Kaneko, Reiko; Haneishi, Nahoko; Kawamura, Yoko

    2012-01-01

    An improved analysis method for 2-mercaptoimidazoline in rubber products containing chlorine was developed. 2-Mercaptoimidazoline (20 µg/mL) is detected by means of TLC with two developing solvents in the official method. But, this method is not quantitative. Instead, we employed HPLC using water-methanol (9 : 1) as the mobile phase. This procedure decreased interfering peaks, and the quantitation limit was 2 µg/mL of standard solution. 2-Mercaptoimidazoline was confirmed by GC-MS (5 µg/mL) and LC/MS (1 µg/mL) in the scan mode. For preparation of test solution, a soaking extraction method, in which 20 mL of methanol was added to the sample and allowed to stand overnight at about 40°C, was used. This gave similar values to the Soxhlet extraction method (official method) and was more convenient. The results indicate that our procedure is suitable for analysis of 2-mercaptoimidazoline. When 2-mercaptoimidazoline is detected, it is confirmed by either GC/MS or LC/MS.

  20. Conceptual design report -- Gasification Product Improvement Facility (GPIF)

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, R.S.; Skinner, W.H.; House, L.S.; Duck, R.R. [CRS Sirrine Engineers, Inc., Greenville, SC (United States); Lisauskas, R.A.; Dixit, V.J. [Riley Stoker Corp., Worcester, MA (United States); Morgan, M.E.; Johnson, S.A. [PSI Technology Co., Andover, MA (United States). PowerServe Div.; Boni, A.A. [PSI-Environmental Instruments Corp., Andover, MA (United States)

    1994-09-01

    The problems heretofore with coal gasification and IGCC concepts have been their high cost and historical poor performance of fixed-bed gasifiers, particularly on caking coals. The Gasification Product Improvement Facility (GPIF) project is being developed to solve these problems through the development of a novel coal gasification invention which incorporates pyrolysis (carbonization) with gasification (fixed-bed). It employs a pyrolyzer (carbonizer) to avoid sticky coal agglomeration caused in the conventional process of gradually heating coal through the 400 F to 900 F range. In so doing, the coal is rapidly heated sufficiently such that the coal tar exists in gaseous form rather than as a liquid. Gaseous tars are then thermally cracked prior to the completion of the gasification process. During the subsequent endothermic gasification reactions, volatilized alkali can become chemically bound to aluminosilicates in (or added to) the ash. To reduce NH{sub 3} and HCN from fuel born nitrogen, steam injection is minimized, and residual nitrogen compounds are partially chemically reduced in the cracking stage in the upper gasifier region. Assuming testing confirms successful deployment of all these integrated processes, future IGCC applications will be much simplified, require significantly less mechanical components, and will likely achieve the $1,000/kWe commercialized system cost goal of the GPIF project. This report describes the process and its operation, design of the plant and equipment, site requirements, and the cost and schedule. 23 refs., 45 figs., 23 tabs.

  1. Genomics to benefit livestock production: improving animal health

    Directory of Open Access Journals (Sweden)

    Graham Stuart Plastow

    2016-06-01

    Full Text Available ABSTRACT The primary principle underlying the application of genomics is that it has the most value for difficult and expensive to measure traits. These traits will differ between species and probably also between markets. Maintenance of health will be one of the biggest challenges for efficient livestock production in the next few decades. This challenge will only increase in the face of demand for animal protein, resistance to existing drugs, and the pressure to reduce the use of antibiotics in agriculture. There is probably genetic variation in susceptibility for all diseases but little has been done to make use of this variation to date. In part this is because it is very difficult as well as expensive to measure this variation. This suggests that genomics should provide one of the ways of tackling the challenge of improving animal health. This paper will discuss the concepts of resistance, variation in susceptibility, and resilience; provide examples and present some recent results in cattle and pigs; and briefly discuss the application of gene editing in relation to disease resistance.

  2. Digital Radiography and Computed Tomography (DRCT) Product Improvement Plan (PIP)

    Energy Technology Data Exchange (ETDEWEB)

    Tim Roney; Bob Pink; Karen Wendt; Robert Seifert; Mike Smith

    2010-12-01

    The Idaho National Laboratory (INL) has been developing and deploying x-ray inspection systems for chemical weapons containers for the past 12 years under the direction of the Project Manager for Non-Stockpile Chemical Materiel (PMNSCM). In FY-10 funding was provided to advance the capabilities of these systems through the DRCT (Digital Radiography and Computed Tomography) Product Improvement Plan (PIP), funded by the PMNSCM. The DRCT PIP identified three research tasks; end user study, detector evaluation and DRCT/PINS integration. Work commenced in February, 2010. Due to the late start and the schedule for field inspection of munitions at various sites, it was not possible to spend sufficient field time with operators to develop a complete end user study. We were able to interact with several operators, principally Mr. Mike Rowan who provided substantial useful input through several discussions and development of a set of field notes from the Pueblo, CO field mission. We will be pursuing ongoing interactions with field personnel as opportunities arise in FY-11.

  3. Production and characterization of activated carbon using indigenous waste materials

    International Nuclear Information System (INIS)

    Shahid, M.; Ibrahim, F.

    2011-01-01

    Activated carbon was produced from shisham wood and coconut shell through chemical activation, using phosphoric acid and low temperature carbonization. Proximate analysis and characterization of the product were carried out and Brunauer Emmett Teller (BET) surface area, total ash content, moisture content, pH value and iodine number were determined. The product characteristics were well comparable with those of the commercially available activated carbon. (author)

  4. The methodical substantiation of measures to improve the use of basic production assets of the enterprise

    Directory of Open Access Journals (Sweden)

    Korol Svetlana Anatolevna

    2013-07-01

    Full Text Available The method of calculating the performance measures to improve the use of basic production assets of the enterprise: production cost, production volume, number of additional workers, depreciation and amortization.

  5.  The Assembly of Lean Production: An Analysis of Doing Production Improvements

    OpenAIRE

    Andersson, Gunnar

    2011-01-01

    This thesis is an analysis of the assembly of the zero-defects project at Glomma Papp AS, a company on manufacture of paper, corrugated board, solid board and display, in Sarpsborg Norway. The zero-defects project was a local production improvement project based on approaches, tools and methods known as Lean. The project is seen as an actor-network, which means that its reality, and the understandings and practices of it, are effects of the web of people, structures, technologies and others w...

  6. The Relationship between Physical Activity and Productivity

    Science.gov (United States)

    1984-04-01

    had heart disease when they began running, and some denied the warning symptoms . Two Seattle studies also show that "vigorous exercise protects...MBA degree from Samford University completed in 1981. He has a wife, Celia , and a daughter Stephanie, age 10. v TABLE OF CONTENTS Preface...occupational setting. The literature also strongly indicates that physical activity reduces the risk of heart disease and illness and injury. These

  7. Application of Lean Manufacturing Tools in a Garment Industry as a Strategy for Productivity Improvement

    Directory of Open Access Journals (Sweden)

    Rebecca M. Nunesca

    2015-11-01

    Full Text Available This study aimed to use and apply lean tools as ways of improving manufacturing systems that lead to reduction of wastes and standardization of cycle time. Model A in Line 1 at sewing section was the focus of the study. The researcher used questionnaires, 5S Audit checklists, and Time Study forms in information-gathering and cycle time-computation. Based on the observation done, the company does not have a standard operation time. Similarly, the researcher observed non-value activities such as unnecessary transportation and manual counting, and there were also product defects due to poor 5S and WIP inventories. After considering lean tools, using process flow and cycle time analysis, the standard time was determined. Likewise, the non-value added activities were reduced, thus productivity was improved. After lean implementation, 100% efficiency was achieved, the rejection rate was reduced to 0.08% and zero WIP inventories in Line 1 became a practice. Lean tools brought significant changes in providing smooth process flow and productive operations, which in turn, give a remarkable contribution in achieving company’s goals, focus on the customers, giving quality products at the right time and at the right place. Therefore, the full implementation of BY Garments would contribute in gaining more profits.

  8. Methodological approach to assessment of organizational resources of the productive activity

    Directory of Open Access Journals (Sweden)

    Alexander Miller

    2017-05-01

    Full Text Available The purpose of this article is to solve the problem connected with development of theoretical and methodological provisions of formation of the assessment procedure of organizational resources of the productive activity. Theoretical results of our research are: improvement of the concept of development of organizational resources of the productive activity; identifying the impact of organizational resources on the productive activity; justification of the basic principles of formation of the assessment system of efficiency of the organizational resources' use. We proposed a unified methodological approach allowing to combine the complexity of assessment of both quantity of core resources of the productive activity and organizational resources, which significantly develops traditional systems of the productive activity management based on identifying quantitative parameters of the subsystems, their assessment, comparison and analysis. We also substantiated our opinion on assessment of organizational resources' values. It is focused on the development of the productive activity and allows to use the developed tools of the methodological approach for forecast assessment of the impact of the quantity of core resources, used in the productive activity, and organizational resources of the productive activity on the economic results of the enterprise.

  9. Physical activities to improve the aged people’s health

    Directory of Open Access Journals (Sweden)

    Raydelin Hernández-Porraspita

    2013-08-01

    Full Text Available The physical activities have as main function the establishment of ways, forms and means that facilitate a stable health and a high capacity of physical yield in the practitioners, so that they can satisfactorily carry out their activities in all the spheres of their lives serving as base for their development as active citizens of the society. The imperious necessity to increase daily realization of physicalrecreational activities to improve the state of our adults' health is one of the highpriority tasks of the Revolution, besides the mediator role that professionals of physical culture and sport carry out when favouring the benefit of a healthier elderly.

  10. Competivity and management activities in die production systems

    Directory of Open Access Journals (Sweden)

    Mariana Rasina

    2010-12-01

    Full Text Available Currently for a production system to act on a global market must have a policy-oriented performance management to increase competitiveness. Performance management should be focused on improved performance by operating rules and principles, techniques, operating methods and tools for improving business performance. To track progress of production, performances should be a system of indicators, well made and systematically followed up.

  11. Improved production, purification and some properties of α-amylase ...

    African Journals Online (AJOL)

    user

    2012-10-04

    Oct 4, 2012 ... nology industries with many potential applications in food, fermentation, textile and .... Large scale production of α-amylase enzyme in a laboratory fermentor ..... induction on amylase production and low cost (Li et al.,. 2010).

  12. Production and characterization of activated carbon from a ...

    African Journals Online (AJOL)

    In this study, the use of a bituminous coal for the production of activated carbons with chemical activation was investigated. The effects of process variables such as chemical reagents, activation temperature, impregnation ratio and carbonization temperature were investigated to optimize these parameters. The resultant ...

  13. Enhancing fructooligosaccharides production by genetic improvement of the industrial fungus Aspergillus niger ATCC 20611.

    Science.gov (United States)

    Zhang, Jing; Liu, Caixia; Xie, Yijia; Li, Ning; Ning, Zhanguo; Du, Na; Huang, Xirong; Zhong, Yaohua

    2017-05-10

    Aspergillus niger ATCC20611 is one of the most potent filamentous fungi used commercially for production of fructooligosaccharides (FOS), which are prospective components of functional food by stimulating probiotic bacteria in the human gut. However, current strategies for improving FOS yield still rely on production process development. The genetic engineering approach hasn't been applied in industrial strains to increase FOS production level. Here, an optimized polyethylene glycol (PEG)-mediated protoplast transformation system was established in A. niger ATCC 20611 and used for further strain improvement. The pyrithiamine resistance gene (ptrA) was selected as a dominant marker and protoplasts were prepared with high concentration (up to 10 8 g -1 wet weight mycelium) by using mixed cell wall-lysing enzymes. The transformation frequency with ptrA can reach 30-50 transformants per μg of DNA. In addition, the efficiency of co-transformation with the EGFP reporter gene (egfp) was high (approx. 82%). Furthermore, an activity-improved variant of β-fructofuranosidase, FopA(A178P), was successfully overexpressed in A. niger ATCC 20611 by using the transformation system. The transformant, CM6, exhibited a 58% increase in specific β-fructofuranosidase activity (up to 507U/g), compared to the parental strain (320U/g), and effectively reduced the time needed for completion of FOS synthesis. These results illustrate the feasibility of strain improvement through genetic engineering for further enhancement of FOS production level. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Clinical profile, outcomes and improvement in symptoms and productivity in rhinitic patients in Karachi, Pakistan

    Directory of Open Access Journals (Sweden)

    Sherwani Ubaid

    2009-12-01

    Full Text Available Abstract Background Rhinitis can cause a heavy toll on patients because of its bothersome effects on productivity. This retrospective study was conducted to explore the clinical profile, outcomes and improvement in the symptoms and productivity resulting from treatment of allergic rhinitis in Pakistan. Methods We carried out a retrospective file review of all allergic rhinitis patients who presented to the Ear, Nose, Throat Consulting Clinic from January, 2006 to June, 2008 using a structured proforma especially designed for this purpose. Data was entered and analyzed using SPSS v. 16.0. Results The charts of 169 patients were reviewed. The mean age of the patients was 35.2 ± 9.1 years. Sixty percent patients were male. Ninety eight patients (58% reported allergy symptoms to be present at both home and work. One hundred and two patients (60.4% had symptoms severe enough to cause absence from work or academic activities. Up to seventy one percent patients were spending between 1000 - 3000 Pakistani Rupees (1 US$= 83.3 Pakistani rupees on the treatment of allergic rhinitis per year. One hundred and fifty one patients (89.3% reported an improvement in rhinitic symptoms and productivity while 18 patients (10.7% didn't. This improvement was significantly associated with satisfaction with treatment (p Conclusion Allergic rhinitis, a ubiquitous disease, was seen to cause a strain on patients in the form of recurrent treatment-related expenses as well as absenteeism from work or other daily activities. Symptoms and productivity improved significantly after treatment.

  15. Active carbon production from modified asphalt

    International Nuclear Information System (INIS)

    Fadhi, A.B.

    2006-01-01

    A granular activated carbons (GACs) have been prepared from some local raw materials such as Qiayarah asphalt (QA) after some modification treatments of this asphalt by various ratios of its original constituents (asphaltenes and maltens) at 180 degree C. Thermal carbonization method by sulfur and steam physical activation have been used for AC preparation. The carbons thus prepared were characterized in the term of iodine, methylene blue (MB), P-nitro phenol (PNP) and CCl4 adsorption. The BET surface area of the prepared ACs has been estimated via a calibration curve between iodine numbers and surface area determined from N2 adsorption isotherm from previous studies, also, the surface area of the prepared ACs were determined through another methods such as retention method by ethylene glycol mono ethyl ether (EGME), adsorption from vapor phase using acetone vapor and adsorption from solution method using PNP and MB as solutes. The results referred to the success of modification method for preparing ACs of good micro porosity as compared with the AC from the untreated asphalt as well as the commercial sample. (author)

  16. Improvement of oxytetracycline production mediated via cooperation of resistance genes in Streptomyces rimosus.

    Science.gov (United States)

    Yin, Shouliang; Wang, Xuefeng; Shi, Mingxin; Yuan, Fang; Wang, Huizhuan; Jia, Xiaole; Yuan, Fang; Sun, Jinliang; Liu, Tiejun; Yang, Keqian; Zhang, Yuxiu; Fan, Keqiang; Li, Zilong

    2017-09-01

    Increasing the self-resistance levels of Streptomyces is an effective strategy to improve the production of antibiotics. To increase the oxytetracycline (OTC) production in Streptomyces rimosus, we investigated the cooperative effect of three co-overexpressing OTC resistance genes: one gene encodes a ribosomal protection protein (otrA) and the other two express efflux proteins (otrB and otrC). Results indicated that combinational overexpression of otrA, otrB, and otrC (MKABC) exerted a synergetic effect. OTC production increased by 179% in the recombinant strain compared with that of the wild-type strain M4018. The resistance level to OTC was increased by approximately two-fold relative to the parental strain, thereby indicating that applying the cooperative effect of self-resistance genes is useful to improve OTC production. Furthermore, the previously identified cluster-situated activator OtcR was overexpressed in MKABC in constructing the recombinant strain MKRABC; such strain can produce OTC of approximately 7.49 g L -1 , which represents an increase of 19% in comparison with that of the OtcR-overexpressing strain alone. Our work showed that the cooperative overexpression of self-resistance genes is a promising strategy to enhance the antibiotics production in Streptomyces.

  17. Improving Farmers' Efficiency in Rice Production In Nigeria: The ...

    African Journals Online (AJOL)

    This paper assesses the effects of extension services on farmers' efficiency and productivity in rice production in Kano State, Nigeria. Data for the study were collected from 126 rice farmers selected using multi stage sampling technique. Stochastic production frontier function was estimated to ascertain the effects of ...

  18. BIOLOGICALLY ACTIVE SUBSTANCES OF SPIRIT PRODUCTION WASTE

    Directory of Open Access Journals (Sweden)

    A. S. Kayshev

    2014-01-01

    Full Text Available A content of biologically active compounds (BAC with signified pharmacological activity in distillers grains was proved. It is prospective for applications of these grains as a raw material resource of pharmaceuticals. A composition of BAC distillers grains received from wheat, corn, barley, millet at different spirit enterprises which use hydro fermentative grain processing. Considering polydispersity of distillers grains they were separated on solid and liquid phases preliminary. Physical and chemical characteristics of distillers grains' liquid base were identified. Elementary composition of distillers grains is signified by active accumulation of biogenic elements (phosphorus, potassium, magnesium, calcium, sodium, iron and low content of heavy metals. The solid phase of distillers grains accumulates carbon, hydrogen and nitrogen in high concentration. The liquid phase of distillers grains contains: proteins and amino acids (20-46%, reducing sugars (5,6%-17,5%, galacturonides (0,8-1,4%, ascorbic acid (6,2-11,4 mg%. The solid base of distillers grains contains: galacturonides (3,4-5,3%, fatty oil (8,4-11,1% with predomination of essential fatty acids, proteins and amino acids (2,1-2,5%, flavonoids (0,4-0,9%, tocopherols (3,4-7,7 mg%. A method of complex processing of distillers grains based on application of membrane filtering of liquid phase and liquid extraction by inorganic and organic solvents of solid phase, which allows almost full extraction of the sum of biologically active compounds (BAC from liquid phase (Biobardin BM and solid phase (Biobardin UL. Biobardin BM comprises the following elements: proteins and amino acids (41-69%, reducing sugars (3,5-15,6%, fatty oil (0,2-0,3%, flavonoids (0,2-0,7%, ascorbic acid (17-37 mg%. Biobardin UL includes: oligouronids (16,4-19,5%, proteins and amino acids (11-21%, fatty oil (3,2-4,9% which includes essential acids; flavonoids (0,6-1,5%, tocopherols (6,6-10,2 mg%, carotinoids (0,13-0,21 mg

  19. HMM Adaptation for Improving a Human Activity Recognition System

    Directory of Open Access Journals (Sweden)

    Rubén San-Segundo

    2016-09-01

    Full Text Available When developing a fully automatic system for evaluating motor activities performed by a person, it is necessary to segment and recognize the different activities in order to focus the analysis. This process must be carried out by a Human Activity Recognition (HAR system. This paper proposes a user adaptation technique for improving a HAR system based on Hidden Markov Models (HMMs. This system segments and recognizes six different physical activities (walking, walking upstairs, walking downstairs, sitting, standing and lying down using inertial signals from a smartphone. The system is composed of a feature extractor for obtaining the most relevant characteristics from the inertial signals, a module for training the six HMMs (one per activity, and the last module for segmenting new activity sequences using these models. The user adaptation technique consists of a Maximum A Posteriori (MAP approach that adapts the activity HMMs to the user, using some activity examples from this specific user. The main results on a public dataset have reported a significant relative error rate reduction of more than 30%. In conclusion, adapting a HAR system to the user who is performing the physical activities provides significant improvement in the system’s performance.

  20. Antifouling Activity of Marine Natural Products

    KAUST Repository

    Qian, Pei-Yuan

    2012-01-01

    With the global ban of application of organotin-based marine coatings by International Maritime Organization in 2008, there is a practical and urgent need of identifying environmentally friendly low-toxic and nontoxic antifouling compounds for marine industries. Marine natural products have been considered as one of the most promising sources of antifouling compounds in recent years. In antifouling compound screening processes, bioassay systems often play most critical/vital roles in screening efforts. To meet various needs, a variety of bioassay systems have been developed and/or adopted in both research and commercial laboratories. In this chapter, we provide a brief outline of common bioassay procedures for both antimicrofouling and antimacrofouling assays, which can serve as a general guideline for setting up bioassay systems in laboratories engaged in antifouling compound screening. Some bioassay procedures currently practiced in various laboratories are not included in this book chapter for various reasons. Individual laboratories should modify bioassay protocols based on their research interests or needs. Nevertheless, we highly recommend the research laboratories to adapt high-throughput assays as much as possible for preliminary screening assays, followed by more complex bioassay processes using multiple target species. We argue strongly for studies in mode-of-action of antifouling compounds against settling propagules, which shall lead to discovery of molecular biomarkers (genes, proteins, receptors, or receptor system) and will allow us to design more targeted bioassay systems.

  1. Extracellular peptidase hunting for improvement of protein production in plant cells and roots

    Directory of Open Access Journals (Sweden)

    Jérôme eLallemand

    2015-02-01

    Full Text Available Plant-based recombinant protein production systems have gained an extensive interest over the past few years, because of their reduced cost and relative safety. Although the first products are now reaching the market, progress are still needed to improve plant hosts and strategies for biopharming. Targeting recombinant proteins toward the extracellular space offers several advantages in terms of protein folding and purification, but degradation events are observed, due to endogenous peptidases. This paper focuses on the analysis of extracellular proteolytic activities in two production systems: cell cultures and root-secretion (rhizosecretion, in Arabidopsis thaliana and Nicotiana tabacum. Proteolytic activities of extracellular proteomes (secretomes were evaluated in vitro against two substrate proteins: bovine serum albumin (BSA and human serum immunoglobulins G (hIgGs. Both targets were found to be degraded by the secretomes, BSA being more prone to proteolysis than hIgGs. The analysis of the proteolysis pH-dependence showed that target degradation was mainly dependent upon the production system: rhizosecretomes contained more peptidase activity than extracellular medium of cell suspensions, whereas variations due to plant species were smaller. Using class-specific peptidase inhibitors, serine and metallopeptidases were found to be responsible for degradation of both substrates. An in-depth in silico analysis of genomic and transcriptomic data from Arabidopsis was then performed and led to the identification of a limited number of serine and metallo-peptidases that are consistently expressed in both production systems. These peptidases should be prime candidates for further improvement of plant hosts by targeted silencing.

  2. Improving energy productivity of sunflower production using data envelopment analysis (DEA) approach.

    Science.gov (United States)

    Avval, Seyed Hashem Mousavi; Rafiee, Shahin; Jafari, Ali; Mohammadi, Ali

    2011-08-15

    Efficient use of energy in agriculture is one of the conditions for sustainable agricultural production. This study applies the data envelopment analysis (DEA) approach to the data of 95 randomly selected farms to investigate the technical and scale efficiencies of farmers with respect to energy use for sunflower production in Golestan province, Iran. The study also helps to identify the wasteful usage and the optimum level of energy from different inputs. According to the results of DEA models, about 36% of farmers were found to be technically efficient and the mean efficiency of sunflower producers was found to be 0.87 and 0.96 under the constant and variable returns to scale assumptions respectively. The optimum energy requirement was calculated as 8448.3 MJ ha⁻¹; accordingly, a potential reduction of 10.8% (1020.3 MJ ha⁻¹) in total energy input could be achieved by raising the performance of farmers to the highest level. Applying a better machinery management technique and conservation tillage methods, application of fertilisers by performance monitoring and utilisation of alternative sources of energy such as compost and chopped residues may be the pathways for improving energy productivity and reducing the environmental footprint. Copyright © 2011 Society of Chemical Industry.

  3. Role of configuration management in improving quality of metal products

    International Nuclear Information System (INIS)

    Ali, U.; Kalsoom, T.

    2007-01-01

    The Configuration Management (CM) is an imperative discipline which helps in producing quality metal products for the customers. CM implements a graded approach to Configuration Items whose failure poses human as well as product losses. Effective CM provides information to Project Management, Quality Control, and Quality Assurance in identifying schedules and processes related to metal component production. The CM is a supportive function, mostly working side by side with Quality Assurance and Quality Control in the development / production of metal parts. The CM provides tools and guidelines for managing a product while Quality Assurance verifies and validates the same outside the scope of Configuration Audits. Configuration Management raises productivity of metal product, makes-available design reuse, reduces service and support costs, enhances visibility and eliminates rework on metal products. The elements of CM i.e. Identification, Control, Status Accounting and Audits playa vital role to enhance the quality of metal products. Only established CM System can make it possible to swing initial development criteria to final user friendly metal products. The challenges of today in our metal industry are to design and develop state-of-the-art products, for which, CM ideas given in this paper, will help to achieve all the set goals. (author)

  4. Improving cellulase productivity of Penicillium oxalicum RE-10 by repeated fed-batch fermentation strategy.

    Science.gov (United States)

    Han, Xiaolong; Song, Wenxia; Liu, Guodong; Li, Zhonghai; Yang, Piao; Qu, Yinbo

    2017-03-01

    Medium optimization and repeated fed-batch fermentation were performed to improve the cellulase productivity by P. oxalicum RE-10 in submerged fermentation. First, Plackett-Burman design (PBD) and central composite design (CCD) were used to optimize the medium for cellulase production. PBD demonstrated wheat bran and NaNO 3 had significant influences on cellulase production. The CCD results showed the maximum filter paper activity (FPA) production of 8.61U/mL could be achieved in Erlenmeyer flasks. The maximal FPA reached 12.69U/mL by submerged batch fermentation in a 7.5-L stirred tank, 1.76-fold higher than that on the original medium. Then, the repeated fed-batch fermentation strategy was performed successfully for increasing the cellulase productivity from 105.75U/L/h in batch fermentation to 158.38U/L/h. The cellulase activity and the glucan conversion of delignined corn cob residue hydrolysis had no significant difference between the enzymes sampled from different cycles of the repeated fed-batch fermentation and that from batch culture. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Assessing the Utility of and Improving USGS Earthquake Hazards Program Products

    Science.gov (United States)

    Gomberg, J. S.; Scott, M.; Weaver, C. S.; Sherrod, B. L.; Bailey, D.; Gibbons, D.

    2010-12-01

    A major focus of the USGS Earthquake Hazards Program (EHP) has been the development and implementation of products and information meant to improve earthquake hazard assessment, mitigation and response for a myriad of users. Many of these products rely on the data and efforts of the EHP and its partner scientists who are building the Advanced National Seismic System (ANSS). We report on a project meant to assess the utility of many of these products and information, conducted collaboratively by EHP scientists and Pierce County Department of Emergency Management staff. We have conducted focus group listening sessions with members of the engineering, business, medical, media, risk management, and emergency response communities as well as participated in the planning and implementation of earthquake exercises in the Pacific Northwest. Thus far we have learned that EHP and ANSS products satisfy many of the needs of engineers and some planners, and information is widely used by media and the general public. However, some important communities do not use these products despite their intended application for their purposes, particularly county and local emergency management and business communities. We have learned that products need to convey more clearly the impact of earthquakes, in everyday terms. Users also want products (e.g. maps, forecasts, etc.) that can be incorporated into tools and systems they use regularly. Rather than simply building products and posting them on websites, products need to be actively marketed and training provided. We suggest that engaging users prior to and during product development will enhance their usage and effectiveness.

  6. Analysis, improvement and application of the MODIS leaf area index products

    Science.gov (United States)

    Yang, Wenze

    Green leaf area governs the exchanges of energy, mass and momentum between the Earth's surface and the atmosphere. Therefore, leaf area index (LAI) and fraction of incident photosynthetically active radiation (0.4-0.7 mum) absorbed by the vegetation canopy (FPAR) are widely used in vegetation monitoring and modeling. The launch of Terra and Aqua satellites with the moderate resolution imaging spectroradiometer (MODIS) instrument onboard provided the first global products of LAI and FPAR, derived mainly from an algorithm based on radiative transfer. The objective of this research is to comprehensively evaluate the Terra and Aqua MODIS LAI/FPAR products. Large volumes of these products have been analyzed with the goal of understanding product quality with respect to version (Collection 3 versus 4), algorithm (main versus back-up), snow (snow-free versus snow on the ground) and cloud (cloud-free versus cloudy) conditions. Field validation efforts identified several key factors that influence the accuracy of algorithm retrievals. The strategy of validation efforts guiding algorithm refinements has led to progressively more accurate LAI/FPAR products. The combination of products derived from the Terra and Aqua MODIS sensors increases the success rate of the main radiative transfer algorithm by 10-20 percent over woody vegetation. The Terra Collection 4 LAI data reveal seasonal swings in green leaf area of about 25 percent in a majority of the Amazon rainforests caused by variability in cloud cover and light. The timing and the influence of this seasonal cycle are critical to understanding tropical plant adaptation patterns and ecological processes. The results presented in this dissertation suggest how the product quality has gradually improved largely through the efforts of validation activities. The Amazon case study highlights the utility of these data sets for monitoring global vegetation dynamics. Thus, these results can be seen as a benchmark for evaluation of

  7. Ensuring and Improving Information Quality for Earth Science Data and Products: Role of the ESIP Information Quality Cluster

    Science.gov (United States)

    Ramapriyan, Hampapuram; Peng, Ge; Moroni, David; Shie, Chung-Lin

    2016-01-01

    Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality - scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

  8. Ensuring and Improving Information Quality for Earth Science Data and Products Role of the ESIP Information Quality Cluster

    Science.gov (United States)

    Ramapriyan, H. K. (Rama); Peng, Ge; Moroni, David; Shie, Chung-Lin

    2016-01-01

    Quality of products is always of concern to users regardless of the type of products. The focus of this paper is on the quality of Earth science data products. There are four different aspects of quality scientific, product, stewardship and service. All these aspects taken together constitute Information Quality. With increasing requirement on ensuring and improving information quality, there has been considerable work related to information quality during the last several years. Given this rich background of prior work, the Information Quality Cluster (IQC), established within the Federation of Earth Science Information Partners (ESIP) has been active with membership from multiple organizations. Its objectives and activities, aimed at ensuring and improving information quality for Earth science data and products, are discussed briefly.

  9. Natural products as a resource for biologically active compounds

    International Nuclear Information System (INIS)

    Hanke, F.J.

    1986-01-01

    The goal of this study was to investigate various sources of biologically active natural products in an effort to identify the active pesticidal compounds involved. The study is divided into several parts. Chapter 1 contains a discussion of several new compounds from plant and animal sources. Chapter 2 introduces a new NMR technique. In section 2.1 a new technique for better utilizing the lanthanide relaxation agent Gd(fod) 3 is presented which allows the predictable removal of resonances without line broadening. Section 2.2 discusses a variation of this technique for use in an aqueous solvent by applying this technique towards identifying the binding sites of metals of biological interest. Section 2.3 presents an unambiguous 13 C NMR assignment of melibiose. Chapter 3 deals with work relating to the molting hormone of most arthropods, 20-hydroxyecdysone. Section 3.1 discusses the use of two-dimensional NMR (2D NMR) to assign the 1 H NMR spectrum of this biologically important compound. Section 3.2 presents a new application for Droplet countercurrent chromatography (DCCC). Chapter 4 presents a basic improvement to the commercial DCCC instrument that is currently being applied to future commercial instruments. Chapter 5 discusses a curious observation of the effects that two previously known compounds, nagilactone C and (-)-epicatechin, have on lettuce and rice and suggest a possible new role for the ubiquitous flavanol (-)-epicatechin in plants

  10. Enzymatic lignocellulose hydrolysis: Improved cellulase productivity by insoluble solids recycling

    Science.gov (United States)

    2013-01-01

    Background It is necessary to develop efficient methods to produce renewable fuels from lignocellulosic biomass. One of the main challenges to the industrialization of lignocellulose conversion processes is the large amount of cellulase enzymes used for the hydrolysis of cellulose. One method for decreasing the amount of enzyme used is to recycle the enzymes. In this study, the recycle of enzymes associated with the insoluble solid fraction after the enzymatic hydrolysis of cellulose was investigated for pretreated corn stover under a variety of recycling conditions. Results It was found that a significant amount of cellulase activity could be recovered by recycling the insoluble biomass fraction, and the enzyme dosage could be decreased by 30% to achieve the same glucose yields under the most favorable conditions. Enzyme productivity (g glucose produced/g enzyme applied) increased between 30 and 50% by the recycling, depending on the reaction conditions. While increasing the amount of solids recycled increased process performance, the methods applicability was limited by its positive correlation with increasing total solids concentrations, reaction volumes, and lignin content of the insoluble residue. However, increasing amounts of lignin rich residue during the recycle did not negatively impact glucose yields. Conclusions To take advantage of this effect, the amount of solids recycled should be maximized, based on a given processes ability to deal with higher solids concentrations and volumes. Recycling of enzymes by recycling the insoluble solids fraction was thus shown to be an effective method to decrease enzyme usage, and research should be continued for its industrial application. PMID:23336604

  11. Enzymatic lignocellulose hydrolysis: Improved cellulase productivity by insoluble solids recycling

    Directory of Open Access Journals (Sweden)

    Weiss Noah

    2013-01-01

    Full Text Available Abstract Background It is necessary to develop efficient methods to produce renewable fuels from lignocellulosic biomass. One of the main challenges to the industrialization of lignocellulose conversion processes is the large amount of cellulase enzymes used for the hydrolysis of cellulose. One method for decreasing the amount of enzyme used is to recycle the enzymes. In this study, the recycle of enzymes associated with the insoluble solid fraction after the enzymatic hydrolysis of cellulose was investigated for pretreated corn stover under a variety of recycling conditions. Results It was found that a significant amount of cellulase activity could be recovered by recycling the insoluble biomass fraction, and the enzyme dosage could be decreased by 30% to achieve the same glucose yields under the most favorable conditions. Enzyme productivity (g glucose produced/g enzyme applied increased between 30 and 50% by the recycling, depending on the reaction conditions. While increasing the amount of solids recycled increased process performance, the methods applicability was limited by its positive correlation with increasing total solids concentrations, reaction volumes, and lignin content of the insoluble residue. However, increasing amounts of lignin rich residue during the recycle did not negatively impact glucose yields. Conclusions To take advantage of this effect, the amount of solids recycled should be maximized, based on a given processes ability to deal with higher solids concentrations and volumes. Recycling of enzymes by recycling the insoluble solids fraction was thus shown to be an effective method to decrease enzyme usage, and research should be continued for its industrial application.

  12. A potential synbiotic product improves the lipid profile of diabetic rats

    Directory of Open Access Journals (Sweden)

    Roselino Mariana N

    2012-09-01

    Full Text Available Abstract Background Previous studies showed that intake of yacon or some lactic acid bacteria was able to inhibit the development of diabetes mellitus, by reducing glucose and associated symptoms, for example, the lipid profile. Objective The purpose of this study was to assess the consumption influence of a potential symbiotic product of soybean and yacon extract and fermented Enterococcus faecium CRL 183 and Lactobacillus helveticus ssp jugurti 416 in reducing blood glucose and lipid levels in an animal model. Methods Diabetes mellitus was chemically induced by intraperitoneal administration of streptozotocin (50 mg/kg body weight. The rats were divided into four groups (n=10: GI – non-diabetic animals that received only a standard chow diet (negative control, GII – diabetic animals that received only chow diet (positive control, GIII – diabetic animals that received the chow diet + 1 mL/kg body weight/day of soybean and yacon unfermented product, GIV – diabetic rats that received the chow diet + 1 mL/kg body weight/day of soybean and yacon fermented product. There was a seven-week treatment period and the following parameters were evaluated: animal body weight, food and water intake, blood glucose, enzyme activities of aspartate aminotransferase (AST and alanine aminotransferase (ALT, triglycerides levels, total cholesterol, HDL-C, non-HDL-C. Cell viability of the fermented product was checked weekly for a seven-week period. Results The product average viable population was 108-109 CFU/mL, by ensuring both the rods and cocci regular intake. No difference was observed between the water and feed intake and body weight of groups that received unfermented and fermented products and the untreated diabetic group. The same was observed for the blood glucose and AST and ALT activities, while some improvement was observed for a lipid profile, represented by reduction of triglycerides level by 15.07% and 33.50% in groups III and IV

  13. Packaging Evaluation Approach to Improve Cosmetic Product Safety

    OpenAIRE

    Benedetta Briasco; Priscilla Capra; Arianna Cecilia Cozzi; Barbara Mannucci; Paola Perugini

    2016-01-01

    In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packag...

  14. Elemental analysis of combustion products by neutron activation

    International Nuclear Information System (INIS)

    Heft, R.E.; Koszykowski, R.F.

    1980-01-01

    This paper gives a brief description of the neutron activation analysis method, which is being used to determine the elemental profile of combustion products from coal-fired power plants, oil shale retorting, and underground coal gasification

  15. CAD/CAM: improved design quality, increased productivity

    Energy Technology Data Exchange (ETDEWEB)

    Evans, D. E.; England, J.

    1980-01-01

    Maintaining productivity levels while assuring the quality of engineering products grows increasingly more difficult and costly for industries such as the energy industry which are heavily committed to product design. The man/machine interface made possible through the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology can be applied to the design process as a tool for increased control to assure the quality of the final engineering product. The quality-control aspects of CAD/CAM technology are addressed in this presentation.

  16. Strategies for Lipid Production Improvement in Microalgae as a Biodiesel Feedstock

    Directory of Open Access Journals (Sweden)

    L. D. Zhu

    2016-01-01

    Full Text Available In response to the energy crisis, global warming, and climate changes, microalgae have received a great deal of attention as a biofuel feedstock. Due to a high lipid content in microalgal cells, microalgae present as a promising alternative source for the production of biodiesel. Environmental and culturing condition variations can alter lipid production as well as chemical compositions of microalgae. Therefore, application of the strategies to activate lipid accumulation opens the door for lipid overproduction in microalgae. Until now, many original studies regarding the approaches for enhanced microalgal lipid production have been reported in an effort to push forward the production of microalgal biodiesel. However, the current literature demonstrates fragmented information available regarding the strategies for lipid production improvement. From the systematic point of view, the review highlights the main approaches for microalgal lipid accumulation induction to expedite the application of microalgal biodiesel as an alternative to fossil diesel for sustainable environment. Of the several strategies discussed, the one that is most commonly applied is the design of nutrient (e.g., nitrogen, phosphorus, and sulfur starvation or limitation. Other viable approaches such as light intensity, temperature, carbon dioxide, salinity stress, and metal influence can also achieve enhanced microalgal lipid production.

  17. 42 CFR 423.162 - Quality improvement organization activities.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Quality improvement organization activities. 423.162 Section 423.162 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICARE PROGRAM VOLUNTARY MEDICARE PRESCRIPTION DRUG BENEFIT Cost Control...

  18. Performance in Physiology Evaluation: Possible Improvement by Active Learning Strategies

    Science.gov (United States)

    Montrezor, Luís H.

    2016-01-01

    The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages…

  19. Improving the effectiveness of geological prospecting with neutron activation analysis

    International Nuclear Information System (INIS)

    Fardy, J.J.

    1984-01-01

    Two examples of the use of neutron activation analysis to improve the effectiveness of geological prospecting are examined. The first is application to the direct hydrogeochemical prospecting for gold in surface waters. The second shows how multielement data banks produced by NAA for a geological formation provide a powerful method for the classification of ore bodies and sedimentary materials

  20. Active video gaming to improve balance in the elderly

    NARCIS (Netherlands)

    Lamoth, C.J.; Caljouw, S.R.; Postema, K.

    2011-01-01

    The combination of active video gaming and exercise (exergaming) is suggested to improve elderly people's balance, thereby decreasing fall risk. Exergaming has been shown to increase motivation during exercise therapy, due to the enjoyable and challenging nature, which could support long-term

  1. Active Learning Improves Student Performance in a Respiratory Physiology Lab

    Science.gov (United States)

    Wolf, Alex M.; Liachovitzky, Carlos; Abdullahi, Abass S.

    2015-01-01

    This study assessed the effectiveness of the introduction of active learning exercises into the anatomy and physiology curriculum in a community college setting. Specifically, the incorporation of a spirometry-based respiratory physiology lab resulted in improved student performance in two concepts (respiratory volumes and the hallmarks of…

  2. Do workplace physical activity interventions improve mental health outcomes?

    Science.gov (United States)

    Chu, A H Y; Koh, D; Moy, F M; Müller-Riemenschneider, F

    2014-06-01

    Mental health is an important issue in the working population. Interventions to improve mental health have included physical activity. To review evidence for the effectiveness of workplace physical activity interventions on mental health outcomes. A literature search was conducted for studies published between 1990 and August 2013. Inclusion criteria were physical activity trials, working populations and mental health outcomes. Study quality was assessed using the Jadad scale. Of 3684 unique articles identified, 17 met all selection criteria, including 13 randomized controlled trials, 2 comparison trials and 2 controlled trials. Studies were grouped into two key intervention areas: physical activity and yoga exercise. Of eight high-quality trials, two provided strong evidence for a reduction in anxiety, one reported moderate evidence for an improvement in depression symptoms and one provided limited evidence on relieving stress. The remaining trials did not provide evidence on improved mental well-being. Workplace physical activity and yoga programmes are associated with a significant reduction in depressive symptoms and anxiety, respectively. Their impact on stress relief is less conclusive. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  3. land evaluation for improved rice production in watari irrigation

    African Journals Online (AJOL)

    DR. AMINU

    This study aimed at raising irrigated rice production in Watari Irrigation scheme, in Kano state, as to bridge the gap ... land including details about maintenance and ... Area of Kano state and cover a total of 4,574 .... which requires a depth of more than 50cm for efficient .... raise the productivity of the soils to optimum for.

  4. Improving product quality and reliability with customer experience data

    NARCIS (Netherlands)

    Brombacher, A.C.; Hopma, E.E.; Ittoo, A.; Lu, Y.; Luyk, I.M.; Maruster, L.; Ribeiro, J.T.S.; Weijters, A.J.M.M.; Wortmann, J.C.

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still

  5. Improving Product Quality and Reliability with Customer Experience Data

    NARCIS (Netherlands)

    Brombacher, Aarnout; Hopma, Eva; Ittoo, Ashwin; Lu, Yuan; Luyk, Ilse; Maruster, Laura; Ribeiro, Joel; Weijters, Ton; Wortmann, Hans

    2012-01-01

    Advance technology development and wide use of the World Wide Web have made it possible for new product development organizations to access multi-sources of data-related customer complaints. However, the number of customer plaints of highly innovative consumer electronic products is still

  6. Cambridge journals blog: Improving feed efficiency in dairy production

    Science.gov (United States)

    Because the cost of feeding animals is one of the greatest expenses in dairy production (40-60% of production costs), research focused on ways to identify and select for animals that are the most efficient at converting feed into milk has greatly expanded during the last decade. The animal Article o...

  7. Improving product usage monitoring and analysis with semantic concepts

    NARCIS (Netherlands)

    Funk, M.; Rozinat, A.; Alves De Medeiros, A.K.; Putten, van der P.H.A.; Corporaal, H.; Aalst, van der W.M.P.; Yang, Jianhua; Ginige, Athula

    2009-01-01

    Nowadays, complex electronic products, such as DVD players or mobile phones, offer a huge number of functions. As a consequence of the complexity of the devices, customers often have problems to use such products effectively. For example, it has been observed that an increasing number of technically

  8. Improving Knowledge for Green Textile Products: Life Cycle Analysis

    Science.gov (United States)

    Nam, Jinhee

    2012-01-01

    Textile products are used heavily every day. The apparel industry is one of the largest industrial polluters, causing damage to both human health and the environment. Despite increasing consumer concern about environmental issues and a growing trend toward supporting sustainable production, consumers are often unable to evaluate accurately which…

  9. Adaptation to climate change in industry: improving resource efficiency through sustainable production applications.

    Science.gov (United States)

    Alkayal, Emrah; Bogurcu, Merve; Ulutas, Ferda; Demirer, Göksel Niyazi

    2015-01-01

    The objective of this study was to investigate the climate change adaptation opportunities of six companies from different sectors through resource efficiency and sustainable production. A total of 77 sustainable production options were developed for the companies based on the audits conducted. After screening these opportunities with each company's staff, 19 options were selected and implemented. Significant water savings (849,668 m3/year) were achieved as a result of the applications that targeted reduction of water use. In addition to water savings, the energy consumption was reduced by 3,607 MWh, which decreased the CO2 emissions by 904.1 tons/year. Moreover, the consumption of 278.4 tons/year of chemicals (e.g., NaCl, CdO, NaCN) was avoided, thus the corresponding pollution load to the wastewater treatment plant was reduced. Besides the tangible improvements, other gains were achieved, such as improved product quality, improved health and safety conditions, reduced maintenance requirements, and ensured compliance with national and EU regulations. To the best of the authors' knowledge, this study is the first ever activity in Turkey devoted to climate change adaptation in the private sector. This study may serve as a building block in Turkey for the integration of climate change adaptation and mitigation approach in the industry, since water efficiency (adaptation) and carbon reduction (mitigation) are achieved simultaneously.

  10. Enhancing efficiency of production cost on seafood process with activity based management method

    Science.gov (United States)

    Tarigan, U.; Tarigan, U. P. P.

    2018-02-01

    The efficiency of production costs has an important impact maintaining company presence in the business world, as well as in the face of increasingly sharp global competition. It was done by identifying and reducing non-value-added activities to decrease production costs and increase profits. The study was conducted at a company engaged in the production of squid (seafood). It has a higher product price than the market as Rp 50,000 per kg while the market price of squid is only Rp 35,000 per kg. The price of the product to be more expensive compared with market price, and thereby a lot more consumers choose the lower market price. Based on the discussions conducted, the implementation of Activity Based Management was seen in the reduction of activities that are not added value in the production process. Since each activities consumers cost, the reduction of nonvalue-added activities has effects on the decline of production cost. The production’s decline costs mainly occur in the reduction of material transfer costs. The results showed that there was an increase after the improvement of 2.60%. Increased production cost efficiency causes decreased production costs and increased profits.

  11. Improving Decision-Making Activities for Meningitis and Malaria

    Science.gov (United States)

    Ceccato, P.; Trzaska, S.; Perez, C.; Kalashnikova, O. V.; del Corral, J.; Cousin, R.; Blumenthal, M. B.; Connor, S.; Thomson, M. C.

    2012-12-01

    Public health professionals are increasingly concerned about the potential impact that climate variability and change can have on infectious disease. The International Research Institute for Climate and Society (IRI) is developing new products to increase the public health community's capacity to understand, use, and demand the appropriate climate data and climate information to mitigate the public health impacts of climate on infectious disease, in particular Meningitis and Malaria. In this paper we present the new and improved products that have been developed for monitoring dust, temperature, rainfall and vectorial capacity model for monitoring and forecasting risks of Meningitis and Malaria epidemics. We also present how the products have been integrated into a knowledge system (IRI Data Library Map room, SERVIR) to support the use of climate and environmental information in climate-sensitive health decision-making.

  12. Improving Decision-Making Activities for Meningitis and Malaria

    Science.gov (United States)

    Ceccato, Pietro; Trzaska, Sylwia; Garcia-Pando, Carlos Perez; Kalashnikova, Olga; del Corral, John; Cousin, Remi; Blumenthal, M. Benno; Bell, Michael; Connor, Stephen J.; Thomson, Madeleine C.

    2013-01-01

    Public health professionals are increasingly concerned about the potential impact that climate variability and change can have on infectious disease. The International Research Institute for Climate and Society (IRI) is developing new products to increase the public health community's capacity to understand, use and demand the appropriate climate data and climate information to mitigate the public health impacts of climate on infectious disease, in particular meningitis and malaria. In this paper, we present the new and improved products that have been developed for: (i) estimating dust aerosol for forecasting risks of meningitis and (ii) for monitoring temperature and rainfall and integrating them into a vectorial capacity model for forecasting risks of malaria epidemics. We also present how the products have been integrated into a knowledge system (IRI Data Library Map Room, SERVIR) to support the use of climate and environmental information in climate-sensitive health decision-making.

  13. Improved activity of immobilized horseradish peroxidase on gold nanoparticles in the presence of bovine serum albumin

    International Nuclear Information System (INIS)

    Ni, Yuyang; Li, Jun; Huang, Zhenzhen; He, Ke; Zhuang, Jiaqi; Yang, Wensheng

    2013-01-01

    The using of macromolecular additives is known to be a simple and effective way to improve the activity of immobilized enzymes on solid support, yet the mechanism has not been well understood. Taking horseradish peroxidase (HRP) as an example, only 30 % of its catalytic activity was kept after being immobilized on the surface of 25-nm Au nanoparticles, mainly attributed to the conformational change of the heme-containing active site. The catalytic activity of HRP was significantly improved to 80 % when a certain amount of bovine serum albumin (BSA) was added at the initial stage of the immobilization. Systematic spectral investigation indicated that the addition of BSA inhibited the tertiary structure change around the active site, which was a prerequisite for improved activity of the immobilized HRP. Steady-state kinetic analyses revealed that the introduction of BSA could effectively improve the turnover rate of substrate to product in spite of slight reduced affinity to substrates, which also contributed to the improved catalytic activity

  14. IMPROVEMENT OF QUALITY ASSURANCE SYSTEM ACTIVITIES OF HIGHER EDUCATION INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Z. M. Sultalieva

    2016-01-01

    Full Text Available Abstract. The aim of the article is the improvement of quality assessment system of higher education institutions in the aspect of management. The problems of quality improvement are revealed and classified. The analysis of criteria assessment sets used to define the efficiency of higher education institutions activity is carried out. The components of quality of higher education institutions activity are specified. The structural model of quality assessment system of higher education institutions activity is offered. The analysis of macro environment of a university based on the method of strategic management is carried out, i.e. PEST analysis. As a result of the research a new model of macro criteria model of quality assessment system of higher education institutions, characterizing quality management as an approach to university efficiency is offered, moreover, this system can define the level of its competitiveness in the aspect of quality management. 

  15. ACTIVE PACKAGING SYSTEM FOR MEAT AND MEAT PRODUCTS

    Directory of Open Access Journals (Sweden)

    Adriana Pavelková

    2012-10-01

    Full Text Available In the recent past, food packaging was used to enable marketing of products and to provide passive protection against environmental contaminations or influences that affect the shelf life of the products. However, unlike traditional packaging, which must be totally inert, active packaging is designed to interact with the contents and/or the surrounding environment. Interest in the use of active packaging systems for meat and meat products has increased in recent years. Active packaging systems are developed with the goal of extending shelf life for foods and increasing the period of time that the food is high quality. Developments in active packaging have led to advances in many areas, including delayed oxidation and controlled respiration rate, microbial growth, and moisture migration. Active packaging technologies include some physical, chemical, or biological action which changes interactions between a package, product, and/or headspace of the package in order to get a desired outcome. Active packaging systems discussed include oxygen scavengers, carbon dioxide scavengers and emitters, moisture control agents, flavour/odour absorbers and releasers  and antimicrobial packaging technologies. Active packaging is typically found in two types of systems; sachets and pads which are placed inside of packages, and active ingredients that are incorporated directly into packaging materials.  Recognition of the benefits of active packaging technologies by the food industry, development of economically viable packaging systems and increased consumer acceptance is necessary for commercial realisation of these packaging technologies.doi:10.5219/205

  16. Present scenario, constraints and strategies for improvement of mungbean-production in Pakistan

    International Nuclear Information System (INIS)

    Haqqani, A.M.; Zubair, M.; Malik, M.R.

    2004-01-01

    Mungbean is one of the important Kharif pulses of Pakistan. It is also grown during spring season, mainly in southern Punjab and Sindh provinces. During 1999-2000, it was planted on an area of 202.7 hectares, with the production of 94.8 tones. Punjab is the mungbean-growing province that alone accounted for 85.6% area and 83% of the total mungbean production, respectively. Cultivation is concentrated in the districts of Layyah, Bhakkar, Mianwali and Rawalpindi. It is mainly grown in Kharif season (July October). Although it is grown in different crop rotations, about 75% cultivation follows mungbean - wheat crop rotation. With the development of short duration and uniform maturing varieties, mungbean can be fitted in various cropping systems. Presently the production of mungbean has increase due to expansion in area but not by the increase in productivity. Among the major constraints, weeds, insect damage and lack of seed production are the most important ones. Research activities on mungbean have mainly focused on the development of high-yielding varieties with wider adaptability, resistance to diseases like mungbean yellow mosaic virus (MYMV) and Cercospora Leaf Spot (CLS), early maturity and insensitivity to photo period. The breeding improvement of mungbean was limited, until 1970, due to the selection from land races, which were of trailing types. Research on this crop like other pulses gained momentum from 1980 when Coordinated Pulses Research Program was started at federal level by PARC, in collaboration with provincial research institutes. This program, through generation of funds, short-term and long-term training, exchange of germplasm/research materials (with National and International Research Institute) and evaluation of new improved lines, strengthened research on pulses. From 1985-86 to date, about ten improved varieties have been released for general cultivation in country. New improved varieties have the potential to increase mungbean production

  17. Constitutive expression of Vitreoscilla haemoglobin in Sphingomonas elodea to improve gellan gum production.

    Science.gov (United States)

    Wu, X C; Chen, Y M; Li, Y D; Li, O; Zhu, L; Qian, C D; Tao, X L; Teng, Y

    2011-02-01

    To improve a commercially used strain for gellan production by exogenous Vitreoscilla haemoglobin (VHb). VHb gene was expressed in Sphingomonas elodea under the control of constitutive bla promoter. Biochemical activity of expressed VHb was confirmed by CO-difference spectra analysis that exhibited a characteristic absorption maximum at 419 nm. During cultivation, not only enhanced cell growth was detected, but also 20% improvement in gellan production was observed after 48 h of incubation, with a maximum yield of 16·82 g l(-1). Moreover, maximum sucrose conversion efficiency (g gellan per g sucrose) was 57·8, 20% higher than that of the parental strain. We further examined the polysaccharide production of VHb-expressing strain at different aeration levels in Erlenmeyer flasks. Again, in all cases, a significant enhancement of gellan production was observed, and the enhancement was more significant under oxygen-limiting conditions (up to 26·8%). VHb exhibited positive effect on cell growth and gellan yield of S. elodea, especially under hypoxic conditions. This is the first application of VHb as an effective metabolic engineering strategy in S. elodea to regulate cell growth and optimize gellan yield. © 2010 The Authors. Journal of Applied Microbiology © 2010 The Society for Applied Microbiology.

  18. Performance improvements on passive activated charcoal 222Rn samplers

    International Nuclear Information System (INIS)

    Wei Suxia

    1996-01-01

    Improvements have been made on passive activated charcoal 222 Rn samplers with sintered metal filters. Based on the samplers of good adaptability to temperature and humidity developed before, better charcoal was selected to further improve their performance in radon absorption ability and moisture-resistance. And charcoal quantity in samplers was strictly controlled. The integration time constant of the improved samplers was about 4.3 days. As the sampler was combined with gamma spectrometer to measure radon concentration, the calibration factor was 0.518 min -1 ·Bq -1 ·m 3 for samplers of 7 days exposure time, and the minimum detectable concentration 0.28 Bq·m -3 if counting time for both background and sample is 1000 minutes. The improved samplers are suited to accurately determine the indoor and outdoor average radon concentration under conditions of great variation in temperature and humidity

  19. An Epigenetic Modifier Results in Improved In Vitro Blastocyst production after Somatic Cell Nuclear Transfer

    DEFF Research Database (Denmark)

    Zhang, Yunhai; Li, Juan; Villemoes, Klaus

    2007-01-01

    The present study was designed to examine the effect of trichostatin A (TSA), an inhibitor of histone deacetylase, on development of porcine cloned embryos. Our results showed that treatment of cloned embryos derived from sow oocytes with 50 nM TSA for up to 24 h after the onset of activation cou...... were tested, and for all cell lines an enhancement in blastocyst development compared to their corresponding control was observed. Our data demonstrate that TSA treatment after somatic cell nuclear transfer in the pig can significantly improve the in vitro blastocyst production...

  20. Summary of strategies for planning Productivity Improvement and Quality Enhancement (PIQE)

    Science.gov (United States)

    1986-01-01

    The Summary of NASA Strategies for Productivity Improvement and Quality Enhancement respond to NASA's eighth top goal: Establish NASA as a leader in the development and application of advanced technology and management practices which contribute to significant increases in both Agency and national productivity. The Strategies provide the framework for development of the agency-wide Productivity Improvement and Quality Enhancement (PIQE) Plans.

  1. Improving the layout of recycling centres by use of lean production principles.

    Science.gov (United States)

    Sundin, Erik; Björkman, Mats; Eklund, Mats; Eklund, Jörgen; Engkvist, Inga-Lill

    2011-06-01

    There has been increased focus on recycling in Sweden during recent years. This focus can be attributed to external environmental factors such as tougher legislation, but also to the potential gains for raw materials suppliers. Recycling centres are important components in the Swedish total recycling system. Recycling centres are manned facilities for waste collection where visitors can bring, sort and discard worn products as well as large-sized, hazardous, and electrical waste. The aim of this paper was to identify and describe the main flows and layout types at Swedish recycling centres. The aim was also to adapt and apply production theory for designing and managing recycling centre operations. More specifically, this means using lean production principles to help develop guidelines for recycling centre design and efficient control. Empirical data for this research was primarily collected through interviews and questionnaires among both visitors and employees at 16 Swedish recycling centres. Furthermore, adapted observation protocols have been used in order to explore visitor activities. There was also close collaboration with a local recycling centre company, which shared their layout experiences with the researchers in this project. The recycling centres studied had a variety of problems such as queues of visitors, overloading of material and improper sorting. The study shows that in order to decrease the problems, the recycling centres should be designed and managed according to lean production principles, i.e. through choosing more suitable layout choices with visible and linear flows, providing better visitor information, and providing suitable technical equipment. Improvements can be achieved through proper planning of the layout and control of the flow of vehicles, with the result of increased efficiency and capacity, shorter visits, and cleaner waste fractions. The benefits of a lean production mindset include increased visitor capacity, waste

  2. Health programmes for school employees: improving quality of life, health and productivity.

    Science.gov (United States)

    Kolbe, Lloyd J; Tirozzi, Gerald N; Marx, Eva; Bobbitt-Cooke, Mary; Riedel, Sara; Jones, Jack; Schmoyer, Michael

    2005-01-01

    School health programmes in the 21st century could include eight components: 1) health services; 2) health education; 3) healthy physical and psychosocial environments; 4) psychological, counselling, and social services; 5) physical education and other physical activities; 6) healthy food services; and 7) integrated efforts of schools, families, and communities to improve the health of school students and employees. The eighth component of modern school health programmes, health programmes for school employees, is the focus of this article. Health programmes for school employees could be designed to increase the recruitment, retention, and productivity of school employees by partially focusing each of the preceding seven components of the school health programme on improving the health and quality of life of school employees as well as students. Thus, efforts to improve the quality of life, health, and productivity of school employees may be distinct from, but integrated with, efforts to improve the quality of life, health, and education of students. School employee health programmes can improve employee: 1) recruitment; 2) morale; 3) retention; and 4) productivity. They can reduce employee: 5) risk behaviours (e.g., physical inactivity); 6) risk factors (e.g., stress, obesity, high blood pressure); (7) illnesses; 8) work-related injuries; 9) absentee days; 10) worker compensation and disability claims; and 11) health care and health insurance costs. Further, if we hope to improve our schools' performance and raise student achievement levels, developing effective school employee health programmes can increase the likelihood that employees will: 12) serve as healthy role models for students; 13) implement effective school health programmes for students; and 14) present a positive image of the school to the community. If we are to improve the quality of life, health, and productivity of school employees in the 21st century: school administrators, employees, and

  3. Provide good air quality for people and improve their productivity

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    Three recent independent studies have documented that the quality of indoor air has a significant and positive influence on the productivity of office workers. A combined analysis of the results of the three studies shows a significant relationship between productivity and perceived indoor air...... quality. The impact on productivity justifies a much higher indoor air quality than the minimum levels prescribed in present standards and guidelines. One way of providing air of high quality for people to breathe, without involving excessive ventilation rates and energy use, is to provide "personalized...... air" to each individual. The application of this concept is discussed....

  4. Ultrasounds pretreatment of olive pomace to improve xylanase and cellulase production by solid-state fermentation.

    Science.gov (United States)

    Leite, Paulina; Salgado, José Manuel; Venâncio, Armando; Domínguez, José Manuel; Belo, Isabel

    2016-08-01

    Olive mills generate a large amount of waste that can be revaluated. This work aim to improve the production lignocellulolytic enzymes by solid-state fermentation using ultrasounds pretreated olive mill wastes. The composition of olive mill wastes (crude and exhausted olive pomace) was compared and several physicochemical characteristics were significantly different. The use of both wastes in SSF was evaluated and a screening of fungi for xylanase and cellulase production was carried out. After screening, the use of exhausted olive pomace and Aspergillus niger led to the highest enzyme activities, so that they were used in the study of ultrasounds pre-treatment. The results showed that the sonication led to a 3-fold increase of xylanase activity and a decrease of cellulase activity. Moreover, the liquid fraction obtained from ultrasounds treatment was used to adjust the moisture of solid and a positive effect on xylanase (3.6-fold increase) and cellulase (1.2-fold increase) production was obtained. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Improving Potato Production in Kenya, Uganda and Ethiopia: A System Diagnosis

    NARCIS (Netherlands)

    Gildemacher, P.R.; Kaguongo, W.; Ortiz, O.; Tesfaye, A.; Woldegiorgis, G.; Wagoire, W.W.; Kakuhenzire, R.; Kinyae, P.; Nyongesa, M.; Struik, P.C.; Leeuwis, C.

    2009-01-01

    Increased productivity of potatoes can improve the livelihood of smallholder potato farmers in Kenya, Uganda and Ethiopia and is required to meet the growing demand. This paper investigates the opportunities for potato system improvement that could result in improved productivity. Through a

  6. Analysis awkward posture at food production activity using RULA ...

    African Journals Online (AJOL)

    If the workers continuously perform the activities throughout the working hours, they may experience prolonged standing which creates fatigue and causes an occupational hazard which includes slips and falls. The goal of this study was to identify awkward postures during food production activities. 40 workers with minimum ...

  7. Improvement of quality management in the processes of tobacco production

    OpenAIRE

    Miceski, Trajko

    2004-01-01

    Quality management, now more than ever, occupies an important place in tobacco production. It presents, above all, a continuous process aimed to satisfy the requirements of both the persons employed in tobacco industry and the layers.

  8. Improving potato production for increased food security of ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    One of the biggest threats to potato production is late blight disease, which requires ... an ancestral recipes handbook; a manual for technical management of new ... Development and validation of a liquid chromatographic method to quantify ...

  9. Lead Farmers Approach in Disseminating Improved Tef Production ...

    African Journals Online (AJOL)

    Abate

    interview schedule and testing the tef variety on field plots of ten lead farmers ..... Product transporting from the farm ... partly explained by the fact that smallholder farmers cannot afford to purchase .... Agricultural Extension, Good Intentions.

  10. IMPROVEMENT OF PRODUCTION PLANNING IN COMPANY PARS KOMPONENTY

    Directory of Open Access Journals (Sweden)

    René Klega

    2014-03-01

    Full Text Available The article analyzes the current status of production planning in company Pars Komponenty s.r.o., proposes a new method of planning based on application of the principle of MRP. It is a discrete type of production with high complexity of BOM and MTO (Make-to-Order and ETO (Engineering-to-Order from the point of decoupling point. The original planning system plans according to production capacity backward without collisions, but for a given type of production does not work in practice. Planning system was analyzed and the main problems were identified, which were high work in progress and material stocks. This article target is to propose a new planining system based on the inclusion of time reserves of purchased material items. New planning system was tested in practise with benefit in reducing both the material inventory and work in progress.

  11. Impact of mutant varieties of blackgram in realising improved productivity

    International Nuclear Information System (INIS)

    Pawar, S.E.

    2001-01-01

    Blackgram (Vigna mungo L. Hepper) is an important pulse crop extensively grown in India. It is the cheapest source of protein for millions of Indians. The seeds contain about 22% protein. The area under cultivation in India is about 3.25 million hectares with an annual production of 1.45 million tons. About 70% of the total area is in the Central and Southern part of the country, which contributes about 77% of the total production. In the past there have been attempts to increase the production and productivity of this crop using conventional breeding approaches at different Agricultural Research Centres. However, the yield remains around 500 kg/ha. We have used induced mutation techniques to break the yield barrier. The induced mutations were used in cross breeding to synthesise an ideal plant type with high yield potential suitable for different agroclimatic conditions

  12. Improved Combustion Products Monitor for the ISS, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Compound Specific Analyzer – Combustion Products, used on the International Space Station as a warning monitor of smoldering or combustion events, is being...

  13. Improved Combustion Products Monitor for the ISS, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Compound Specific Analyzer - Combustion Products is used on the International Space Station as a warning monitor of smoldering or combustion events and, after...

  14. Assessment of activation products in the Savannah River Site environment

    International Nuclear Information System (INIS)

    Carlton, W.H.; Denham, M.

    1996-07-01

    This document assesses the impact of radioactive activation products released from SRS facilities since the first reactor became operational late in 1953. The isotopes reported here are those whose release resulted in the highest dose to people living near SRS: 32 P, 51 Cr, 60 C, and 65 Zn. Release pathways, emission control features, and annual releases to the aqueous and atmospheric environments are discussed. No single incident has resulted in a major acute release of activation products to the environment. The releases were the result of normal operations of the reactors and separations facilities. Releases declined over the years as better controls were established and production was reduced. The overall radiological impact of SRS activation product atmospheric releases from 1954 through 1994 on the offsite maximally exposed individual can be characterized by a total dose of 0.76 mrem. During the same period, such an individual received a total dose of 14,400 mrem from non-SRS sources of ionizing radiation present in the environment. SRS activation product aqueous releases between 1954 and 1994 resulted in a total dose of 54 mrem to the offsite maximally exposed individual. The impact of SRS activation product releases on offsite populations also has been evaluated

  15. Improved activation cross sections for vanadium and titanium

    International Nuclear Information System (INIS)

    Muir, D.W.; Arthur, E.D.

    1983-01-01

    Vanadium alloys such as V-20Ti and V-Cr-Ti are attractive candidates for use as structural materials in fusion-reactor blankets. The virtual absence of long-lived activation products in these alloys suggest the possibility of reprocessing on an intermediate time scale. We have employed the modern Hauser-Feshbach nuclear-model code GNASH to calculate cross sections for neutron-activation reactions in 50 V and 51 V, to allow a more accurate assessment of induced radioactivity in vanadium alloys. In addition, cross sections are calculated for the reactions 46 Ti(n,2n) and 45 Ti(n,2n) in order to estimate the production of 44 Ti, a 1.2-MeV gamma-ray source with a half-life of 47 years

  16. Improving the Signal for U.S. Navy Officer Productivity

    Science.gov (United States)

    2014-12-01

    American Economic Review, 93(1), 216–240. Retrieved from http://www.jstor.org/stable/3132169 Mankiw , G., Romer, D., & Weil, D. (1992). A contribution...individual perfonnance appraisal system to optimally signal officer productivity. This paper utilizes the economics literature on individual perfonnance...signal officer productivity. This paper utilizes the economics literature on individual performance appraisals and promotion systems as the lens

  17. Towards improving construction labor productivity and projects’ performance

    OpenAIRE

    Mostafa E. Shehata; Khaled M. El-Gohary

    2011-01-01

    Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome fro...

  18. WORKPLACE SPIRITUALITY FOR IMPROVED PRODUCTIVITY: A GENDERED PERSPECTIVE

    OpenAIRE

    Vyas-Doorgapersad, Shikha

    2017-01-01

    There are a very few studies available to gain insight into the impact of yoga and alternative therapies1 on stress management, conflict resolution and work productivity. In previous studies the focus fell on the gendered perspective, exploring the impact of spiritual modalities on the physical and mental wellness of male and female employees. Spiritual practices such as yoga and other alternative therapies have been found to be significant to enhance work productivity, hence be part of organ...

  19. Improving aerobic capacity through active videogames: A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Jorge Luiz de Brito-Gomes

    2015-09-01

    Full Text Available AbstractThe rate of peak workload improvement between different types of Active Video Games (AVG in young sedentary adults was investigated. Aerobic capacity improvement after a 6-week intervention between AVG types was also compared. Twenty participants, after baseline assessments, were randomized into one of three parallel groups: structured AVG (n= 6, unstructured AVG (n= 7 and a control group (n= 7. Participants played their respective AVG 3 times a week for 6-weeks (30 minutes-session. The control group maintained normal activities. Both structured and unstructured AVG improved peak workload after four weeks but only the structured group maintained this improvement through week five and six. Aerobic capacity improved in the unstructured (Pre: 36.0 ± 5.2ml.kg.min-¹,Post: 39.7 ± 4.9ml.kg.min-¹, p = .038 and structured AVG (Pre: 39.0 ± 5.9ml.kg.min-¹,Post: 47.8 ± 4.3ml.kg.min-¹, p = .006 groups. Structured AVG provide greater health benefits to aerobic capacity and peak workload in young sedentary but otherwise healthy males relative to unstructured AVG.

  20. Vancomycin analogues containing monosaccharides exhibit improved antibiotic activity: a combined one-pot enzymatic glycosylation and chemical diversification strategy.

    Science.gov (United States)

    Thayer, Desiree A; Wong, Chi-Huey

    2006-09-18

    Many natural products contain carbohydrate moieties that contribute to their biological activity. Manipulation of the carbohydrate domain of natural products through multiple glycosylations to identify new derivatives with novel biological activities has been a difficult and impractical process. We report a practical one-pot enzymatic approach with regeneration of cosubstrates to synthesize analogues of vancomycin that contain an N-alkyl glucosamine, which exhibited marked improvement in antibiotic activity against a vancomycin-resistant strain of Enterococcus.

  1. MILK KEFIR: COMPOSITION, MICROBIAL CULTURES, BIOLOGICAL ACTIVITIES AND RELATED PRODUCTS

    Directory of Open Access Journals (Sweden)

    Maria Rosa Prado

    2015-10-01

    Full Text Available In recent years, there has been a strong focus on beneficial foods with probiotic microorganisms and functional organic substances. In this context, there is an increasing interest in the commercial use of kefir, since it can be marketed as a natural beverage that has health promoting bacteria. There are numerous commercially available kefir based-products. Kefir may act as a matrix in the effective delivery of probiotic microorganisms in different types of products. Also, the presence of kefir’s exopolysaccharides, known as kefiran, which has biological activity, certainly adds value to products. Kefiran can also be used separately in other food products and as a coating film for various food and pharmaceutical products. This article aims to update the information about kefir and its microbiological composition, biological activity of the kefir’s microflora and the importance of kefiran as a beneficial health substance.

  2. Milk kefir: composition, microbial cultures, biological activities, and related products.

    Science.gov (United States)

    Prado, Maria R; Blandón, Lina Marcela; Vandenberghe, Luciana P S; Rodrigues, Cristine; Castro, Guillermo R; Thomaz-Soccol, Vanete; Soccol, Carlos R

    2015-01-01

    In recent years, there has been a strong focus on beneficial foods with probiotic microorganisms and functional organic substances. In this context, there is an increasing interest in the commercial use of kefir, since it can be marketed as a natural beverage that has health promoting bacteria. There are numerous commercially available kefir based-products. Kefir may act as a matrix in the effective delivery of probiotic microorganisms in different types of products. Also, the presence of kefir's exopolysaccharides, known as kefiran, which has biological activity, certainly adds value to products. Kefiran can also be used separately in other food products and as a coating film for various food and pharmaceutical products. This article aims to update the information about kefir and its microbiological composition, biological activity of the kefir's microflora and the importance of kefiran as a beneficial health substance.

  3. APPLICABILITY OF ACTIVITY BASED COSTING IN NEW PRODUCT DEVELOPMENT PROCESSES

    Directory of Open Access Journals (Sweden)

    Ewa Wanda MARUSZEWSKA

    2015-01-01

    Full Text Available The purpose of the article is to emphasis that activity based costing is a proper tool for engineers to enhance their deci-sion-making process while developing new product. The theoretical analysis shows that variety of factors shall be en-compassed into new product decision-making process and therefore engineers and management should pay great attention to proper cost allocation. The paper suggests the usage of Activity Based Costing methodology for new product development decision-making process. Author states that application ABC in the process of rational decision-making referring to new product development enables managers and engineers to prioritize possible solutions, and reallocate resources used in production process in order to meet wider organizational goals. It would also contribute in coopera-tion of managers and engineers for the sake of organizational goal.

  4. Improvement Strategies, Cost Effective Production, and Potential Applications of Fungal Glucose Oxidase (GOD: Current Updates

    Directory of Open Access Journals (Sweden)

    Manish K. Dubey

    2017-06-01

    Full Text Available Fungal glucose oxidase (GOD is widely employed in the different sectors of food industries for use in baking products, dry egg powder, beverages, and gluconic acid production. GOD also has several other novel applications in chemical, pharmaceutical, textile, and other biotechnological industries. The electrochemical suitability of GOD catalyzed reactions has enabled its successful use in bioelectronic devices, particularly biofuel cells, and biosensors. Other crucial aspects of GOD such as improved feeding efficiency in response to GOD supplemental diet, roles in antimicrobial activities, and enhancing pathogen defense response, thereby providing induced resistance in plants have also been reported. Moreover, the medical science, another emerging branch where GOD was recently reported to induce several apoptosis characteristics as well as cellular senescence by downregulating Klotho gene expression. These widespread applications of GOD have led to increased demand for more extensive research to improve its production, characterization, and enhanced stability to enable long term usages. Currently, GOD is mainly produced and purified from Aspergillus niger and Penicillium species, but the yield is relatively low and the purification process is troublesome. It is practical to build an excellent GOD-producing strain. Therefore, the present review describes innovative methods of enhancing fungal GOD production by using genetic and non-genetic approaches in-depth along with purification techniques. The review also highlights current research progress in the cost effective production of GOD, including key advances, potential applications and limitations. Therefore, there is an extensive need to commercialize these processes by developing and optimizing novel strategies for cost effective GOD production.

  5. Structuring front-end innovation activities throughout strategic product planning

    Directory of Open Access Journals (Sweden)

    Thaisa Rodrigues

    Full Text Available Abstract Strategic product planning (SPP for new product development (NPD in the front-end of innovation (FEI is a great challenge for managers and practitioners. This article analyzes the structuring process of FEI activities during SPP. A research was carried out with 78 industries from both food and furniture in Brazil. Our study revealed that FEI activities are structured in an intricate network with a high level of complexity and interdependence. The large amount of activities and the complexity in structuring them denote that companies are concerned to reduce uncertainties and risks intensifying the planning phase.

  6. Altering Reservoir Wettability to Improve Production from Single Wells

    Energy Technology Data Exchange (ETDEWEB)

    W. W. Weiss

    2006-09-30

    Many carbonate reservoirs are naturally fractured and typically produce less than 10% original oil in place during primary recovery. Spontaneous imbibition has proven an important mechanism for oil recovery from fractured reservoirs, which are usually weak waterflood candidates. In some situations, chemical stimulation can promote imbibition of water to alter the reservoir wettability toward water-wetness such that oil is produced at an economic rate from the rock matrix into fractures. In this project, cores and fluids from five reservoirs were used in laboratory tests: the San Andres formation (Fuhrman Masho and Eagle Creek fields) in the Permian Basin of Texas and New Mexico; and the Interlake, Stony Mountain, and Red River formations from the Cedar Creek Anticline in Montana and South Dakota. Solutions of nonionic, anionic, and amphoteric surfactants with formation water were used to promote waterwetness. Some Fuhrman Masho cores soaked in surfactant solution had improved oil recovery up to 38%. Most Eagle Creek cores did not respond to any of the tested surfactants. Some Cedar Creek anticline cores had good response to two anionic surfactants (CD 128 and A246L). The results indicate that cores with higher permeability responded better to the surfactants. The increased recovery is mainly ascribed to increased water-wetness. It is suspected that rock mineralogy is also an important factor. The laboratory work generated three field tests of the surfactant soak process in the West Fuhrman Masho San Andres Unit. The flawlessly designed tests included mechanical well clean out, installation of new pumps, and daily well tests before and after the treatments. Treatments were designed using artificial intelligence (AI) correlations developed from 23 previous surfactant soak treatments. The treatments were conducted during the last quarter of 2006. One of the wells produced a marginal volume of incremental oil through October. It is interesting to note that the field

  7. BACK and DRAW activities for improving writing skills

    Directory of Open Access Journals (Sweden)

    Muhammad Lukman Syafii

    2017-09-01

    Full Text Available This present paper addresses the issue of writing as an important aspect of EFL instruction. Writing as one of the four basic language skills plays a pivotal role in the context of English teaching as a foreign language in Indonesia. Considering these problems, it is important to modify the writing process in such a way to cope the writing. The process of writing the writer means is BACK and DRAW activities. What the writer termed as BACK and DRAW is a set of writing activities involving students’ active participation in the process, their intense learning experience in producing a required text, as well as their interactive work with peers and the teacher. BACK and DRAW stands for Brainstorming, Attaching, Correcting, Keeping, Developing, Revising, Arranging, and Wow! Or Wonderful! Or Well done!. These activities are good ways to improve the writing Ability.

  8. Perceiving active listening activates the reward system and improves the impression of relevant experiences.

    Science.gov (United States)

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T; Sugawara, Sho K; Tanabe, Hiroki C; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener.

  9. Improving productivity and welfare among workers of small and household textile and garment units in India

    Directory of Open Access Journals (Sweden)

    Sanjay RODE

    2009-06-01

    Full Text Available Global Production System has changed remarkably over the period of time. In order to cope up with the change in the nature and type of production, the small and household garment and textile units are employing the younger and skilled labor force. The workers in these units are employed on the contract, causal and temporary basis. They are not given the different benefits as applicable to the large scale unit workers. Such workers are employed more hours and weekly holidays are not given to them. The small and household units are simply maximizing their interest and profit. Such capitalist nature of productive activities makes the labor worse. They are given less wages and classified as unskilled workers. Workers are not given proper training and security of work by these units. Their access to productive assets and standard of living is low as compare to the large unit’s workers. In order to improve the workers conditions, minimum wage should be given to all workers in small and household units. Such units must maintain their annual records of transactions. Small and household units must send their workers for compulsory training. Work place environment, minimum hours of work are required to regulate in these sectors. Immediate steps will have positive impact on workers earning and standard of living. It will help for further productivity enhancement.

  10. Improvement of exopolysaccharide production in Lactobacillus casei LC2W by overexpression of NADH oxidase gene.

    Science.gov (United States)

    Li, Nan; Wang, Yuanlong; Zhu, Ping; Liu, Zhenmin; Guo, Benheng; Ren, Jing

    2015-02-01

    Lactobacillus casei LC2W is an exopolysaccharide (EPS)-producing strain with probiotic effects. To investigate the regulation mechanism of EPS biosynthesis and to improve EPS production through cofactor engineering, a H₂O-forming NADH oxidase gene was cloned from Streptococcus mutans and overexpressed in L. casei LC2W under the control of constitutive promoter P₂₃. The recombinant strain LC-nox exhibited 0.854 U/mL of NADH oxidase activity, which was elevated by almost 20-fold in comparison with that of wild-type strain. As a result, overexpression of NADH oxidase resulted in a reduction in growth rate. In addition, lactate production was decreased by 22% in recombinant strain. It was proposed that more carbon source was saved and used for the biosynthesis of EPS, the production of which was reached at 219.4 mg/L, increased by 46% compared to that of wild-type strain. This work provided a novel and convenient genetic approach to manipulate metabolic flux and to increase EPS production. To the best of our knowledge, this is the first report which correlates cofactor engineering with EPS production. Copyright © 2015 Elsevier GmbH. All rights reserved.

  11. Induced mutations for improvement of grain legume production II

    International Nuclear Information System (INIS)

    1982-02-01

    Out of 18 papers presented, 15 fall within the INIS subject scope. Other topics covered were: mutagenic efficiency of ethylmethane sulphonate in soybean; induced mutations for rust resistance in soybean; and nitrogen fixation-potentials for improvement in legumes

  12. Increased office productivity through improved indoor air quality

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2002-01-01

    Control of indoor pollution sources and ventilation are both means of improving indoor air quality. Three independent experiments have recently documented that removing a pollution source or increasing the ventilation rate will improve perceived air quality, reduce the intensity of several Sick...... with the air quality was reduced by either measure. The quantitative relationsh8ip was 1.1% change in performance per 10% dissatisfied, in the range 25-70% dissatisifed, or 0.5% change in performance per 1 decipol (dp), in the range 2-13 dp. Significant improvements in performance occurred only when......, future developments in HVCAC technology may include "personalized air ", new ways of improving the quality of supply air (e.g., by filtration), more extensive use of heat recovery from exhaust air and systematic selection of low-polluting building and furnishing materials....

  13. adoption of improved rubber production technologies by farmers

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    1987-09-23

    Sep 23, 1987 ... GLOBAL JOURNAL OF AGRICULTURAL SCIENCES VOL. ... farmers, identify methods for disseminating information on improved ... generated from the survey were analyzed using descriptive statistics such as percentages, frequencies, averages, .... corporate social responsibility functions of Rubber.

  14. Memory suppression is an active process that improves over childhood

    Directory of Open Access Journals (Sweden)

    Pedro M Paz-Alonso

    2009-09-01

    Full Text Available We all have memories that we prefer not to think about. The ability to suppress retrieval of unwanted memories has been documented in behavioral and neuroimaging research using the Think/No-Think (TNT paradigm with adults. Attempts to stop memory retrieval are associated with increased activation of lateral prefrontal cortex (PFC and concomitant reduced activation in medial temporal lobe (MTL structures. However, the extent to which children have the ability to actively suppress their memories is unknown. This study investigated memory suppression in middle childhood using the TNT paradigm. Forty children aged 8 to 12 and 30 young adults were instructed either to remember (Think or suppress (No-Think the memory of the second word of previously studied word-pairs, when presented with the first member as a reminder. They then performed two different cued recall tasks, testing their memory for the second word in each pair after the Think/No-Think phase using the same first studied word within the pair as a cue (intra-list cue and also an independent cue (extra-list cue. Children exhibited age-related improvements in memory suppression from age 8 to 12 in both memory tests, against a backdrop of overall improvements in declarative memory over this age range. These findings suggest that memory suppression is an active process that develops during late childhood, likely due to an age-related refinement in the ability to engage PFC to down-regulate activity in areas involved in episodic retrieval.

  15. Improved Chemotherapeutic Activity by Morus alba Fruits through Immune Response of Toll-Like Receptor 4

    Directory of Open Access Journals (Sweden)

    Bo Yoon Chang

    2015-10-01

    Full Text Available Morus alba L. fruits have long been used in traditional medicine by many cultures. Their medicinal attributes include cardiovascular, hepatoprotective, neuroprotective and immunomodulatory actions. However, their mechanism of macrophage activation and anti-cancer effects remain unclear. The present study investigated the molecular mechanisms of immune stimulation and improved chemotherapeutic effect of M. alba L. fruit extract (MFE. MFE stimulated the production of cytokines, nitric oxide (NO and tumor necrosis factor-α (TNF-α and tumoricidal properties of macrophages. MFE activated macrophages through the mitogen-activated protein kinase (MAPKinase and nuclear factor-κB (NF-κB signaling pathways downstream from toll-like receptor (TLR 4. MFE was shown to exhibit cytotoxicity of CT26 cells via the activated macrophages, even though MFE did not directly affect CT26 cells. In a xenograft mouse model, MFE significantly enhanced anti-cancer activity combined with 5-fluorouracil and markedly promoted splenocyte proliferation, natural killer (NK cell activity, cytotoxic T lymphocyte (CTL activity and IFN-γ production. Immunoglobulin G (IgG antibody levels were significantly increased. These results indicate the indirect anti-cancer activity of MFE through improved immune response mediated by TLR4 signaling. M. alba L. fruit extract might be a potential anti-tumor immunomodulatory candidate chemotherapy agent.

  16. Improved Chemotherapeutic Activity by Morus alba Fruits through Immune Response of Toll-Like Receptor 4.

    Science.gov (United States)

    Chang, Bo Yoon; Kim, Seon Beom; Lee, Mi Kyeong; Park, Hyun; Kim, Sung Yeon

    2015-10-13

    Morus alba L. fruits have long been used in traditional medicine by many cultures. Their medicinal attributes include cardiovascular, hepatoprotective, neuroprotective and immunomodulatory actions. However, their mechanism of macrophage activation and anti-cancer effects remain unclear. The present study investigated the molecular mechanisms of immune stimulation and improved chemotherapeutic effect of M. alba L. fruit extract (MFE). MFE stimulated the production of cytokines, nitric oxide (NO) and tumor necrosis factor-α (TNF-α) and tumoricidal properties of macrophages. MFE activated macrophages through the mitogen-activated protein kinase (MAPKinase) and nuclear factor-κB (NF-κB) signaling pathways downstream from toll-like receptor (TLR) 4. MFE was shown to exhibit cytotoxicity of CT26 cells via the activated macrophages, even though MFE did not directly affect CT26 cells. In a xenograft mouse model, MFE significantly enhanced anti-cancer activity combined with 5-fluorouracil and markedly promoted splenocyte proliferation, natural killer (NK) cell activity, cytotoxic T lymphocyte (CTL) activity and IFN-γ production. Immunoglobulin G (IgG) antibody levels were significantly increased. These results indicate the indirect anti-cancer activity of MFE through improved immune response mediated by TLR4 signaling. M. alba L. fruit extract might be a potential anti-tumor immunomodulatory candidate chemotherapy agent.

  17. Training to Support Standardization and Improvement of Configuration Management Activities

    Energy Technology Data Exchange (ETDEWEB)

    Dauber, V.; Scheffer, N.; Schoenfelder, C.

    2015-07-01

    In recent years AREVA has conducted several measures to enhance the effectiveness and efficiency of configuration management-related activities within a nuclear power plant (NPP) new build as well as modernization projects, thereby further strengthening its commitment to achieving the highest level of safety in nuclear facilities. This paper describes a new training course that shall support the standardization and improvement of configuration management activities. Recommendations will be given that should be considered when designing and developing comparable training programs to support change processes within engineering units. (Author)

  18. High temperature corrosion during biomass firing: improved understanding by depth resolved characterisation of corrosion products

    DEFF Research Database (Denmark)

    Okoro, Sunday Chukwudi; Montgomery, Melanie; Jappe Frandsen, Flemming

    2015-01-01

    changes within the near surface region (covering both the deposit and the steel surface). Such cross-section analysis was further complemented by plan view investigations (additionally involving X-ray diffraction) combined with removal of the corrosion products. Improved insights into the nature......The high temperature corrosion of an austenitic stainless steel (TP 347H FG), widely utilised as a superheater tube material in Danish power stations, was investigated to verify the corrosion mechanisms related to biomass firing. KCl coated samples were exposed isothermally to 560 degrees C...... of the corrosion products as a function of distance from the deposit surface were revealed through this comprehensive characterisation. Corrosion attack during simulated straw-firing conditions was observed to occur through both active oxidation and sulphidation mechanisms....

  19. Application of nuclear techniques in improving agricultural productivity with particular reference to pasture management

    International Nuclear Information System (INIS)

    Majid Ajorlo; Ramdzani Abdullah

    2009-01-01

    Nuclear techniques are appropriate tools to settle problems for agriculture or natural resources which cannot be solved using conventional agricultural techniques. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties -all by using nuclear techniques- with particular reference to pasture management are discussed. Insect pest control by Sterile Insect Techniques (SIT); soil and water management using neutron moisture probes; determining N-fixation capacity of legumes using N-15 isotope and nuclear methods; soil erosion measurement using of fallout radionuclide such as Cs-137; monitoring the movement of saline water in salt-affected land using isotopes of chlorine; livestock production and health by RIA and ELISA are some of achievements so far obtained in improving agricultural productivity. The ultimate goal of the nuclear technique investigation in agriculture is to use the resources efficiently in obtaining higher plant and livestock yields while increasing the quality and protecting them against insects, diseases and weeds. (Author)

  20. Evaluating the effectiveness of a gainsharing programme for labour productivity improvement

    Directory of Open Access Journals (Sweden)

    Robert W.D. Zondo

    2017-10-01

    Contribution: Gainsharing is a desirable alternative as it contributes to raising the competence levels and productivity improvement of an organisation. As a comparison, the 360-degree performance appraisal does not have an impact on labour productivity.

  1. Superoxide anion production by human neutrophils activated by Trichomonas vaginalis.

    Science.gov (United States)

    Song, Hyun-Ouk; Ryu, Jae-Sook

    2013-08-01

    Neutrophils are the predominant inflammatory cells found in vaginal discharges of patients infected with Trichomonas vaginalis. In this study, we examined superoxide anion (O2 (.-)) production by neutrophils activated by T. vaginalis. Human neutrophils produced superoxide anions when stimulated with either a lysate of T. vaginalis, its membrane component (MC), or excretory-secretory product (ESP). To assess the role of trichomonad protease in production of superoxide anions by neutrophils, T. vaginalis lysate, ESP, and MC were each pretreated with a protease inhibitor cocktail before incubation with neutrophils. Superoxide anion production was significantly decreased by this treatment. Trichomonad growth was inhibited by preincubation with supernatants of neutrophils incubated for 3 hr with T. vaginalis lysate. Furthermore, myeloperoxidase (MPO) production by neutrophils was stimulated by live trichomonads. These results indicate that the production of superoxide anions and MPO by neutrophils stimulated with T. vaginalis may be a part of defense mechanisms of neutrophils in trichomoniasis.

  2. Autonomous and professional maintenance in metallurgical enterprise as activities within total productive maintenance

    Directory of Open Access Journals (Sweden)

    B. Gajdzik

    2014-04-01

    Full Text Available The content of this publication consists of notions connected with Total Productive Maintenance (TPM in metallurgical enterprise. The basic areas of devices condition management through Autonomous and Professional Maintenance are described here. Mentioned areas of activities are performed in metallurgical enterprise ArcelorMittal Poland within pillars of World Class Manufacturing (WCM. The aims of UR programs are to maintain the basic functionality of the devices and decrease the number of failures in order to reach improvement of production efficiency.

  3. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... the widely published normative advice. While there may be several reasons for discrepancies between research results and prac-tice this paper focuses on problems of implementation of the identified success factors. Within the research area of NPD-management there has been numerous surveys as well as case...

  4. Enriching step-based product information models to support product life-cycle activities

    Science.gov (United States)

    Sarigecili, Mehmet Ilteris

    The representation and management of product information in its life-cycle requires standardized data exchange protocols. Standard for Exchange of Product Model Data (STEP) is such a standard that has been used widely by the industries. Even though STEP-based product models are well defined and syntactically correct, populating product data according to these models is not easy because they are too big and disorganized. Data exchange specifications (DEXs) and templates provide re-organized information models required in data exchange of specific activities for various businesses. DEXs show us it would be possible to organize STEP-based product models in order to support different engineering activities at various stages of product life-cycle. In this study, STEP-based models are enriched and organized to support two engineering activities: materials information declaration and tolerance analysis. Due to new environmental regulations, the substance and materials information in products have to be screened closely by manufacturing industries. This requires a fast, unambiguous and complete product information exchange between the members of a supply chain. Tolerance analysis activity, on the other hand, is used to verify the functional requirements of an assembly considering the worst case (i.e., maximum and minimum) conditions for the part/assembly dimensions. Another issue with STEP-based product models is that the semantics of product data are represented implicitly. Hence, it is difficult to interpret the semantics of data for different product life-cycle phases for various application domains. OntoSTEP, developed at NIST, provides semantically enriched product models in OWL. In this thesis, we would like to present how to interpret the GD & T specifications in STEP for tolerance analysis by utilizing OntoSTEP.

  5. Active robotic training improves locomotor function in a stroke survivor

    Directory of Open Access Journals (Sweden)

    Krishnan Chandramouli

    2012-08-01

    Full Text Available Abstract Background Clinical outcomes after robotic training are often not superior to conventional therapy. One key factor responsible for this is the use of control strategies that provide substantial guidance. This strategy not only leads to a reduction in volitional physical effort, but also interferes with motor relearning. Methods We tested the feasibility of a novel training approach (active robotic training using a powered gait orthosis (Lokomat in mitigating post-stroke gait impairments of a 52-year-old male stroke survivor. This gait training paradigm combined patient-cooperative robot-aided walking with a target-tracking task. The training lasted for 4-weeks (12 visits, 3 × per week. The subject’s neuromotor performance and recovery were evaluated using biomechanical, neuromuscular and clinical measures recorded at various time-points (pre-training, post-training, and 6-weeks after training. Results Active robotic training resulted in considerable increase in target-tracking accuracy and reduction in the kinematic variability of ankle trajectory during robot-aided treadmill walking. These improvements also transferred to overground walking as characterized by larger propulsive forces and more symmetric ground reaction forces (GRFs. Training also resulted in improvements in muscle coordination, which resembled patterns observed in healthy controls. These changes were accompanied by a reduction in motor cortical excitability (MCE of the vastus medialis, medial hamstrings, and gluteus medius muscles during treadmill walking. Importantly, active robotic training resulted in substantial improvements in several standard clinical and functional parameters. These improvements persisted during the follow-up evaluation at 6 weeks. Conclusions The results indicate that active robotic training appears to be a promising way of facilitating gait and physical function in moderately impaired stroke survivors.

  6. Improving the Management of Innovative Development of Industrial Production According to Industry Specifics

    Directory of Open Access Journals (Sweden)

    Papizh Yuliia S.

    2018-03-01

    Full Text Available The problem of improvement of management efficiency of innovative development of industrial enterprises in modern economic conditions is indicated. The dynamics of innovative processes in Ukraine together with volumes of innovative activity of domestic enterprises are analyzed. The basic principles of formation and efficient functioning of the organizational-economic mechanism of innovative development of industrial production are substantiated. The branch specificity in management of innovative development of coal enterprises is identified. Directions of improvement of the organizational-economic mechanism of management of innovative development of enterprises of coal industry are defined. The basic principles of introduction of the mechanism for stimulation of innovative development of enterprises of coal industry are suggested.

  7. The Architecture Improvement Method: cost management and systematic learning about strategic product architectures

    NARCIS (Netherlands)

    de Weerd-Nederhof, Petronella C.; Wouters, Marc; Teuns, Steven J.A.; Hissel, Paul H.

    2007-01-01

    The architecture improvement method (AIM) is a method for multidisciplinary product architecture improvement, addressing uncertainty and complexity and incorporating feedback loops, facilitating trade-off decision making during the architecture creation process. The research reported in this paper

  8. Improving maize productivity through tillage and nitrogen management

    African Journals Online (AJOL)

    Continuous cultivation of fields with same implement (cultivator) creates a hard pan in the subsoil which adversely affects crop productivity. In addition to tillage, nitrogen management is a key factor for better crop growth and yield. Impact of different tillage systems and nitrogen management on yield attributes and grain yield ...

  9. Improvement and enhancement of clavulanic acid production in ...

    African Journals Online (AJOL)

    hope&shola

    2010-10-04

    Oct 4, 2010 ... effects of different medium containing vegetable oil on cell growth ... fermentation of Streptomyces clavuligerus ATCC 27064 were ... The results of this study can be applied for the efficient production of ... 27064 strain, which requires a source of carbon, nitrogen ... Microorganism and cultivation conditions.

  10. Working with smallholder farmers to improve maize production and ...

    African Journals Online (AJOL)

    Mo

    Smallhold farmers in Western Kenya face crop production and marketing constraints that bind them within ... Local sales become more important from March to May, serving as a strategic community food .... scare cash is required for critical medical and educational ... 46% greater fertilizer use efficiency and 54% understorey.

  11. LED Light to improve Strawberry Flavour, Quality and Production

    NARCIS (Netherlands)

    Hanenberg, M.A.A.; Janse, J.; Verkerke, W.

    2016-01-01

    A current demonstration in the greenhouses of Wageningen UR in Bleiswijk (the Netherlands) shows positive results of LED light on the quality and production of strawberries (Fragaria x ananassa). In this demonstration two strawberry cultivars, Elsanta and Sonata, are exposed to three different light

  12. Improved production efficiency in cattle to reduce their carbon ...

    African Journals Online (AJOL)

    The FAO publication, Livestock's Long Shadow, indicated that livestock is responsible for 18% of the world's greenhouse gas production thereby creating the perception that livestock is a major cause of global warming. Methane (CH4) makes up 16% of total world gas emissions and is the second most important ...

  13. Using membrane transporters to improve crops for sustainable food production

    Science.gov (United States)

    With the global population predicted to grow by at least 25% by 2050, the need for sustainable production of nutritious foods is critical for human and environmental well-being. Recent advances show that specialized plant membrane transporters can be utilized to enhance yields of staple crops, incre...

  14. Optimum stocking rate for goat production on improved highland ...

    African Journals Online (AJOL)

    The effects of four stocking rates (SR; 7.5, 15, 30 and 45 goats ha-1) on goat performance and herbage productivity were examined on the perennial pastures. The experiment was applied by grazing 65 six-months old Chinese Yunling black goat wethers for two years. Significant year × SR interactions were observed on ...

  15. Improving Language Production Using Subtitled Similar Task Videos

    Science.gov (United States)

    Arslanyilmaz, Abdurrahman; Pedersen, Susan

    2010-01-01

    This study examines the effects of subtitled similar task videos on language production by nonnative speakers (NNSs) in an online task-based language learning (TBLL) environment. Ten NNS-NNS dyads collaboratively completed four communicative tasks, using an online TBLL environment specifically designed for this study and a chat tool in…

  16. TAKING ADVANTAGES OF KAIZEN TO IMPROVE LABOUR PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    T. Kostenko

    2013-09-01

    Full Text Available The paper encapsulates the essence of kaizen system, its main elements and the possibility of use it in enhancing labour productivity. The study examines a specific of kaizen implementation in Japan, the U.S. and Europe as well as in Ukraine and Russia. The comparative analysis of traditional and kaizen management is presented.

  17. Improving planting pattern for intercropping in the whole production ...

    African Journals Online (AJOL)

    DR. NJ TONUKARI

    2012-04-26

    Apr 26, 2012 ... vegetable for the people or to enrich biodiversity of rubber plantations in the area of hundred-miles rubber ..... Influence of rubber canopy on intercrop productivity. Trans. Malaysian Soc. Plant Physiol. 2: 75-79. Lin Weifu, Zhou Zhongyu, Huang Shoufeng (1999). A review and prospect of intercropping in ...

  18. Improvements in Fermentative Biological Hydrogen Production Through Metabolic Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hallenbeck, P. C.; Ghosh, D.; Sabourin-Provost, G.

    2009-07-01

    Dramatically rising oil prices and increasing awareness of the dire environmental consequences of fossil fuel use, including startling effects of climate change, are refocusing attention world-wide on the search for alternative fuels. Hydrogen is poised to become an important future energy carrier. Renewable hydrogen production is pivotal in making it a truly sustainable replacement for fossil fuels. (Author)

  19. Improvements in Fermentative Biological Hydrogen Production Through Metabolic Engineering

    International Nuclear Information System (INIS)

    Hallenbeck, P. C.; Ghosh, D.; Sabourin-Provost, G.

    2009-01-01

    Dramatically rising oil prices and increasing awareness of the dire environmental consequences of fossil fuel use, including startling effects of climate change, are refocusing attention world-wide on the search for alternative fuels. Hydrogen is poised to become an important future energy carrier. Renewable hydrogen production is pivotal in making it a truly sustainable replacement for fossil fuels. (Author)

  20. Improvement of acid protease production by a mixed culture of ...

    African Journals Online (AJOL)

    The synthesis of acid protease by Aspergillus oryzae AS3042 was enhanced significantly with the mixed culture of Aspergillus niger SL-09 using solid-state fermentation technique. The influence of carbon sources, nitrogen sources and the addition of phytic acid on acid protease production were investigated. The enzyme ...

  1. Application of Technology on Improving Beef Cattle Productivity in East Nusa Tenggara

    Directory of Open Access Journals (Sweden)

    Wirdahayati R B

    2010-03-01

    Full Text Available The Province of East Nusa Tenggara (NTT had been one of the major beef cattle suppliers under traditional management system in Indonesia. The beef cattle farming that based on grazing native pasture and the introduction of shrub legumes (Leucaena leucocephala may contribute to around 15 – 50% of the farmers’ household income. In the last few years, supply of beef cattle tended to decline due to the decrease in cattle population in NTT. Some basic improvements in management and feeding toward increasing beef cattle productivities had been carried out in Nusa Tenggara, such as a baseline survey on Cattle Health and Productivity Survey (CHAPS conducted in 1990 – 1992. The objective of the program was to identify the existing beef cattle productivity and health condition throughout Nusa Tenggara. A collaborative research with the Ministry of Research and Technology (Integrated Prime Research had also been carried out and the result showed that early weaning in Bali calves that can be practised as early as 3 – 6 months to prevent calves losses during the dry season. A program of the Assessment on Beef Cattle Base Farming Activities had also been conducted to improve fattening and breeding practices through the improvement in beef cattle management and feeding systems. At the latest development, fattening scheme has been introduced under a partnership approach involving private sectors and cooperatives. This needs to be facilitated by the government to accelerate the program such as access to capital and intensive extension services to build farmers awareness toward profit oriented beef cattle farming. Optimalization of the available potential resources and technology in NTT, will be an opportunity to enhance beef cattle production and gains back the reputation as one of the major producing beef cattle in the past. This will also support the national livestock program nowadays, called Beef Cattle Self Sufficiency Program 2014.

  2. Active Commuting: Workplace Health Promotion for Improved Employee Well-Being and Organizational Behavior.

    Science.gov (United States)

    Page, Nadine C; Nilsson, Viktor O

    2016-01-01

    Objective: This paper describes a behavior change intervention that encourages active commuting using electrically assisted bikes (e-bikes) for health promotion in the workplace. This paper presents the preliminary findings of the intervention's impact on improving employee well-being and organizational behavior, as an indicator of potential business success. Method: Employees of a UK-based organization participated in a workplace travel behavior change intervention and used e-bikes as an active commuting mode; this was a change to their usual passive commuting behavior. The purpose of the intervention was to develop employee well-being and organizational behavior for improved business success. We explored the personal benefits and organizational co-benefits of active commuting and compared these to a travel-as-usual group of employees who did not change their behavior and continued taking non-active commutes. Results: Employees who changed their behavior to active commuting reported more positive affect, better physical health and more productive organizational behavior outcomes compared with passive commuters. In addition, there was an interactive effect of commuting mode and commuting distance: a more frequent active commute was positively associated with more productive organizational behavior and stronger overall positive employee well-being whereas a longer passive commute was associated with poorer well-being, although there was no impact on organizational behavior. Conclusion: This research provides emerging evidence of the value of an innovative workplace health promotion initiative focused on active commuting in protecting and improving employee well-being and organizational behavior for stronger business performance. It considers the significant opportunities for organizations pursuing improved workforce well-being, both in terms of employee health, and for improved organizational behavior and business success.

  3. Improving Global Gross Primary Productivity Estimates by Computing Optimum Light Use Efficiencies Using Flux Tower Data

    Science.gov (United States)

    Madani, Nima; Kimball, John S.; Running, Steven W.

    2017-11-01

    In the light use efficiency (LUE) approach of estimating the gross primary productivity (GPP), plant productivity is linearly related to absorbed photosynthetically active radiation assuming that plants absorb and convert solar energy into biomass within a maximum LUE (LUEmax) rate, which is assumed to vary conservatively within a given biome type. However, it has been shown that photosynthetic efficiency can vary within biomes. In this study, we used 149 global CO2 flux towers to derive the optimum LUE (LUEopt) under prevailing climate conditions for each tower location, stratified according to model training and test sites. Unlike LUEmax, LUEopt varies according to heterogeneous landscape characteristics and species traits. The LUEopt data showed large spatial variability within and between biome types, so that a simple biome classification explained only 29% of LUEopt variability over 95 global tower training sites. The use of explanatory variables in a mixed effect regression model explained 62.2% of the spatial variability in tower LUEopt data. The resulting regression model was used for global extrapolation of the LUEopt data and GPP estimation. The GPP estimated using the new LUEopt map showed significant improvement relative to global tower data, including a 15% R2 increase and 34% root-mean-square error reduction relative to baseline GPP calculations derived from biome-specific LUEmax constants. The new global LUEopt map is expected to improve the performance of LUE-based GPP algorithms for better assessment and monitoring of global terrestrial productivity and carbon dynamics.

  4. Biohydrogen production using waste activated sludge disintegrated by gamma irradiation

    International Nuclear Information System (INIS)

    Yin, Yanan; Wang, Jianlong

    2015-01-01

    Highlights: • The waste activated sludge could be disintegrated by gamma irradiation. • The disintegrated sludge could be used for biohydrogen production. • Combined alkali-irradiation treatment achieved the highest solubilization of sludge. - Abstract: The biohydrogen production using the disintegrated and dissolved sludge by gamma irradiation was studied. The experimental results showed that gamma irradiation and irradiation combined with alkali pretreatment could disintegrate and dissolve waste activated sludge for biohydrogen production. The alkali-irradiation treatment of the sludge at pH = 12 and 20 kGy achieved the highest disintegration and dissolution, i.e., it could destroy the cell walls and release organic matters (such as soluble COD, polysaccharides and protein) into the solution. The disintegrated sludge could be used as a low-cost substrate for biohydrogen production

  5. Improvement in the yield and quality of kalmegh (Andrographis paniculata Nees) under the sustainable production system.

    Science.gov (United States)

    Verma, Rajesh Kumar; Verma, Sanjeet K; Pankaj, Umesh; Gupta, Anand K; Khan, Khushboo; Shankar, Karuna

    2015-02-01

    Andrographis paniculata Nees is an annual erect herb with wide medicinal and pharmacological applications due to the presence of andrographolide and other active chemical constituents. The large-scale cultivation of the kalmegh is not in practice. The aim of this study was to establish sustainable production systems of A. paniculata cv CIM-Megha with the application of different bioinoculants and chemical fertilisers. A. paniculata herb and andrographolide yield in the dried leaves was found to be highest (218% and 61.3%, respectively) in treatment T3 (NPK+Bacillus sp.) compared with T1 (control). The soil organic carbon, soil microbial respiration, soil enzymes activity and available nutrients improved significantly with combined application of bioinoculants and chemical fertilisers.

  6. Breeding for improved production of Nile tilapia (Oreochromis niloticus L.)

    NARCIS (Netherlands)

    Rutten, M.J.M.

    2005-01-01

    The aim of this thesis was to generate knowledge that supports the design of breeding programs for Nile tilapia targeting genetic improvement of body weight and fillet yield to serve the European market. To this end, both the genetic variation and the performance levels of different strains of

  7. Processed products of termites and lake flies: improving ...

    African Journals Online (AJOL)

    The lake region is endowed with plenty of edible insects. Edible insects can provide partial solution to food insecurity. The aim of this project was to promote entomophagy for food security by adding value to termites and lake flies, enhancing taste and preference of edible insects, and improving shelf life of edible insect ...

  8. Adoption of improved oil palm production and processing ...

    African Journals Online (AJOL)

    This suggests the need for the provision of subsidies and financial support to farmers to enable them pay for the necessary farm inputs. Keywords: Oil palm, Improved technologies, Information sources, Nigeria Agro-Science Vol. 5 (1) 2006: pp. 26-35. http://dx.doi.org/10.4314/as.v5i1.1541 · AJOL African Journals Online.

  9. Asymmetric bipolar membrane: A tool to improve product purity

    NARCIS (Netherlands)

    Balster, J.H.; Sumbharaju, R.; Srikantharajah, S.; Punt, Ineke G.M.; Stamatialis, Dimitrios; Jordan, V.; Wessling, Matthias

    2007-01-01

    Bipolar membranes (BPMs) are catalytic membranes for electro-membrane processes splitting water into protons and hydroxyl ions. To improve selectivity and current efficiency of BPMs, we prepare new asymmetric BPMs with reduced salt leakages. The flux of salt ions across a BPM is determined by the

  10. Improved Ethanol Production from Xylose by Candida shehatae Induced by Dielectric Barrier Discharge Air Plasma

    International Nuclear Information System (INIS)

    Chen Huixia; Xiu Zhilong; Bai Fengwu

    2014-01-01

    Xylose fermentation is essential for ethanol production from lignocellulosic biomass. Exposure of the xylose-fermenting yeast Candida shehatae (C. shehatae) CICC1766 to atmospheric pressure dielectric barrier discharge (DBD) air plasma yields a clone (designated as C81015) with stability, which exhibits a higher ethanol fermentation rate from xylose, giving a maximal enhancement in ethanol production of 36.2% compared to the control (untreated). However, the biomass production of C81015 is lower than that of the control. Analysis of the NADH (nicotinamide adenine dinucleotide)- and NADPH (nicotinamide adenine dinucleotide phosphate)-linked xylose reductases and NAD + -linked xylitol dehydrogenase indicates that their activities are enhanced by 34.1%, 61.5% and 66.3%, respectively, suggesting that the activities of these three enzymes are responsible for improving ethanol fermentation in C81015 with xylose as a substrate. The results of this study show that DBD air plasma could serve as a novel and effective means of generating microbial strains that can better use xylose for ethanol fermentation

  11. Improved Ethanol Production from Xylose by Candida shehatae Induced by Dielectric Barrier Discharge Air Plasma

    Science.gov (United States)

    Chen, Huixia; Xiu, Zhilong; Bai, Fengwu

    2014-06-01

    Xylose fermentation is essential for ethanol production from lignocellulosic biomass. Exposure of the xylose-fermenting yeast Candida shehatae (C. shehatae) CICC1766 to atmospheric pressure dielectric barrier discharge (DBD) air plasma yields a clone (designated as C81015) with stability, which exhibits a higher ethanol fermentation rate from xylose, giving a maximal enhancement in ethanol production of 36.2% compared to the control (untreated). However, the biomass production of C81015 is lower than that of the control. Analysis of the NADH (nicotinamide adenine dinucleotide)- and NADPH (nicotinamide adenine dinucleotide phosphate)-linked xylose reductases and NAD+-linked xylitol dehydrogenase indicates that their activities are enhanced by 34.1%, 61.5% and 66.3%, respectively, suggesting that the activities of these three enzymes are responsible for improving ethanol fermentation in C81015 with xylose as a substrate. The results of this study show that DBD air plasma could serve as a novel and effective means of generating microbial strains that can better use xylose for ethanol fermentation.

  12. Design of Continuous Crystallizers for Production of Active Pharmaceutical Ingredients

    DEFF Research Database (Denmark)

    Capellades Mendez, Gerard; Christensen, Troels V.

    The production of Active Pharmaceutical Ingredients (APIs) is conducted primarily in batch processes. This manufacturing approach is reinforced by a patent-driven business model and the need to minimize the process development times for newly patented drugs. However, the regulatory and business...... environments are now changing. The increasing costs of drug development, combined with the strict regulations and the competition from generic manufacturers, have pushed pharmaceutical companies to seek cheaper and more sustainable production methods. Transition from batch to Continuous Pharmaceutical...

  13. Entropy Production and Fluctuation Theorems for Active Matter

    Science.gov (United States)

    Mandal, Dibyendu; Klymko, Katherine; DeWeese, Michael R.

    2017-12-01

    Active biological systems reside far from equilibrium, dissipating heat even in their steady state, thus requiring an extension of conventional equilibrium thermodynamics and statistical mechanics. In this Letter, we have extended the emerging framework of stochastic thermodynamics to active matter. In particular, for the active Ornstein-Uhlenbeck model, we have provided consistent definitions of thermodynamic quantities such as work, energy, heat, entropy, and entropy production at the level of single, stochastic trajectories and derived related fluctuation relations. We have developed a generalization of the Clausius inequality, which is valid even in the presence of the non-Hamiltonian dynamics underlying active matter systems. We have illustrated our results with explicit numerical studies.

  14. Adiabatic surface thermometer for improved production braze quality

    International Nuclear Information System (INIS)

    Dittbenner, G.R.

    1975-01-01

    An adiabatic surface thermometer was developed to control automatically the critical temperature-time cycle of a production vacuum-brazing process. Investigations revealed that optimum braze-joint strength required precise control of the brazing temperature. Spot-welded thermocouples could not be used because the spot welds cause surface damage. This thermometer touches the surface and uses a differential thermocouple and heater to measure surface temperature without heat flow, thereby eliminating large errors caused by conduction losses common to conventional spring-loaded thermocouples. Temperatures in air or vacuum are measured to 800 0 C with errors less than 5 0 C. This thermometer has minimized the rejection of production parts, resulting in a cost saving to the U. S. Energy Research and Development Administration

  15. Improving the Product Documentation Process of a Small Software Company

    Science.gov (United States)

    Valtanen, Anu; Ahonen, Jarmo J.; Savolainen, Paula

    Documentation is an important part of the software process, even though it is often neglected in software companies. The eternal question is how much documentation is enough. In this article, we present a practical implementation of lightweight product documentation process resulting from SPI efforts in a small company. Small companies’ financial and human resources are often limited. The documentation process described here, offers a template for creating adequate documentation consuming minimal amount of resources. The key element of the documentation process is an open source web-based bugtracking system that was customized to be used as a documentation tool. The use of the tool enables iterative and well structured documentation. The solution best serves the needs of a small company with off-the-shelf software products and striving for SPI.

  16. Opportunities to improve oil productivity in unstructured deltaic reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This report contains presentations presented at a technical symposium on oil production. Chapter 1 contains summaries of the presentations given at the Department of Energy (DOE)-sponsored symposium and key points of the discussions that followed. Chapter 2 characterizes the light oil resource from fluvial-dominated deltaic reservoirs in the Tertiary Oil Recovery Information System (TORIS). An analysis of enhanced oil recovery (EOR) and advanced secondary recovery (ASR) potential for fluvial-dominated deltaic reservoirs based on recovery performance and economic modeling as well as the potential resource loss due to well abandonments is presented. Chapter 3 provides a summary of the general reservoir characteristics and properties within deltaic deposits. It is not exhaustive treatise, rather it is intended to provide some basic information about geologic, reservoir, and production characteristics of deltaic reservoirs, and the resulting recovery problems.

  17. Genetic improvement of plants for enhanced bio-ethanol production.

    Science.gov (United States)

    Saha, Sanghamitra; Ramachandran, Srinivasan

    2013-04-01

    The present world energy situation urgently requires exploring and developing alternate, sustainable sources for fuel. Biofuels have proven to be an effective energy source but more needs to be produced to meet energy goals. Whereas first generation biofuels derived from mainly corn and sugarcane continue to be used and produced, the contentious debate between "feedstock versus foodstock" continues. The need for sources that can be grown under different environmental conditions has led to exploring newer sources. Lignocellulosic biomass is an attractive source for production of biofuel, but pretreatment costs to remove lignin are high and the process is time consuming. Genetically modified plants that have increased sugar or starch content, modified lignin content, or produce cellulose degrading enzymes are some options that are being explored and tested. This review focuses on current research on increasing production of biofuels by genetic engineering of plants to have desirable characteristics. Recent patents that have been filed in this area are also discussed.

  18. WORKPLACE SPIRITUALITY FOR IMPROVED PRODUCTIVITY:A GENDERED PERSPECTIVE

    OpenAIRE

    Shikha Vyas-Doorgapersad

    2017-01-01

    There are a very few studies available to gain insight into the impact ofyoga andalternative therapies1on stress management, conflict resolution and workproductivity. In previous studies the focus fell on the gendered perspective,exploring the impact of spiritual modalities on the physical and mental wellness ofmale and female employees.Spiritual practices such as yogaandother alternativetherapies have been found to be significant to enhance work productivity, hence bepart o...

  19. The effect of social capital on improving productivity of human ...

    African Journals Online (AJOL)

    The results of tests showed that increasing one unit of social capital and each of its three-fold aspects, productivity might be increased by 0.91, 0.58, 0.79 and 0.91, respectively. SPSS 19 and lisrel 8/8 software were used to analyze data and the statistic universe of this study included the managers and employees of Bandar ...

  20. Using membrane transporters to improve crops for sustainable food production

    Science.gov (United States)

    Schroeder, Julian I.; Delhaize, Emmanuel; Frommer, Wolf B.; Guerinot, Mary Lou; Harrison, Maria J.; Herrera-Estrella, Luis; Horie, Tomoaki; Kochian, Leon V.; Munns, Rana; Nishizawa, Naoko K.; Tsay, Yi-Fang; Sanders, Dale

    2013-01-01

    With the global population predicted to grow by at least 25 per cent by 2050, the need for sustainable production of nutritious foods is critical for human and environmental health. Recent advances show that specialized plant membrane transporters can be used to enhance yields of staple crops, increase nutrient content and increase resistance to key stresses, including salinity, pathogens and aluminium toxicity, which in turn could expand available arable land. PMID:23636397