WorldWideScience

Sample records for acs lcid project

  1. The ACS LCID Project: overview and first results

    CERN Document Server

    Gallart, Carme

    2007-01-01

    The star formation history (SFH) of Local Group galaxies is a powerful tool for studying their evolution, including chemical enrichment histories and stellar population gradients, which in turn may shed light on the role of reionization or Supernovae feedback in galaxy formation and evolution. In particular, isolated dwarfs are ideal laboratories since their evolution has not been complicated by the vicinity of giant galaxies. In this paper, we present the project Local Cosmology from Isolated Dwarfs (LCID), aimed at deriving detailed SFHs for a sample of Local Group isolated dwarf galaxies. To accomplish this goal we have collected, using the ACS on board the HST, color-magnitude diagrams (CMD) reaching their oldest main sequence turnoff (V~28 or M_V~+3.5) with good photometric accuracy. Some preliminary results from the CMDs are shown and briefly discussed.

  2. The ACS LCID project VII: the blue stragglers population in the isolated dSph galaxies Cetus and Tucana

    CERN Document Server

    Monelli, M; Mapelli, M; Bernard, E J; Aparicio, A; Skillman, E D; Stetson, P B; Gallart, C; Hidalgo, S L; Mayer, L; Tolstoy, E

    2011-01-01

    We present the first investigation of the Blue Straggler star (BSS) population in two isolated dwarf spheroidal galaxies of the Local Group, Cetus and Tucana. Deep HST/ACS photometry allowed us to identify samples of 940 and 1214 candidates, respectively. The analysis of the star formation histories of the two galaxies suggests that both host a population of BSSs. Specifically, if the BSS candidates are interpreted as young main sequence stars, they do not conform to their galaxy's age-metallicity relationship. The analysis of the luminosity function and the radial distributions support this conclusion, and suggest a non-collisional mechanism for the BSS formation, from the evolution of primordial binaries. This scenario is also supported by the results of new dynamical simulations presented here. Both galaxies coincide with the relationship between the BSS frequency and the absolute visual magnitude Mv found by Momany et al (2007). If this relationship is confirmed by larger sample, then it could be a valuab...

  3. The ACS LCID project. VI. The SFH of the Tucana dSph and the relative ages of the isolated dSph galaxies

    CERN Document Server

    Monelli, M; Hidalgo, S L; Aparicio, A; Skillman, E D; Cole, A A; Weisz, D R; Mayer, L; Bernard, E J; Cassisi, S; Dolphin, A E; Drozdovsky, I; Stetson, P B

    2010-01-01

    We present a detailed study of the star formation history (SFH) of the Tucana dwarf spheroidal galaxy. High quality, deep HST/ACS data, allowed us to obtain the deepest color-magnitude diagram to date, reaching the old main sequence turnoff (F814 ~ 29) with good photometric accuracy. Our analysis, based on three different SFH codes, shows that Tucana is an old and metal-poor stellar system, which experienced a strong initial burst of star formation at a very early epoch (~ 13 Gyr ago) which lasted a maximum of 1 Gyr (sigma value). We are not able to unambiguously answer the question of whether most star formation in Tucana occurred before or after the end of the reionization era, and we analyze alternative scenarios that may explain the transformation of Tucana from a gas-rich galaxy into a dSph. Current measurements of its radial velocity do not preclude that Tucana may have crossed the inner regions of the Local Group once, and so gas stripping by ram pressure and tides due to a close interaction cannot be ...

  4. The ACS LCID project. IX. Imprints of the early Universe in the radial variation of the star formation history of dwarf galaxies

    CERN Document Server

    Hidalgo, Sebastian L; Aparicio, Antonio; Gallart, Carme; Skillman, Evan D; Cassisi, Santi; Bernard, Edouard J; Mayer, Lucio; Stetson, Peter; Cole, Andrew; Dolphin, Andrew

    2013-01-01

    Based on Hubble Space Telescope observations from the Local Cosmology from Isolated Dwarfs project, we present the star formation histories, as a function of galactocentric radius, of four isolated Local Group dwarf galaxies: two dSph galaxies, Cetus and Tucana, and two transition galaxies (dTrs), LGS-3 and Phoenix. The oldest stellar populations of the dSphs and dTrs are, within the uncertainties, coeval ($\\sim 13 Gyr$) at all galactocentric radii. We find that there are no significative differences between the four galaxies in the fundamental properties (such as the normalized star formation rate or age-metallicity relation) of their outer regions (radii greater than four exponential scale lengths); at large radii, these galaxies consist exclusively of old ($\\geq 10.5 Gyr$) metal-poor stars. The duration of star formation in the inner regions vary from galaxy to galaxy, and the extended central star formation in the dTrs produces the dichotomy between dSph and dTr galaxy types. The dTr galaxies show promine...

  5. The ACS LCID project. IX. Imprints of the early universe in the radial variation of the star formation history of dwarf galaxies

    International Nuclear Information System (INIS)

    Based on Hubble Space Telescope observations from the Local Cosmology from Isolated Dwarfs project, we present the star formation histories, as a function of galactocentric radius, of four isolated Local Group dwarf galaxies: two dSph galaxies, Cetus and Tucana, and two transition galaxies (dTrs), LGS-3 and Phoenix. The oldest stellar populations of the dSphs and dTrs are, within the uncertainties, coeval (∼13 Gyr) at all galactocentric radii. We find that there are no significative differences between the four galaxies in the fundamental properties (such as the normalized star formation rate or age-metallicity relation) of their outer regions (radii greater than four exponential scale lengths); at large radii, these galaxies consist exclusively of old (≳ 10.5 Gyr) metal-poor stars. The duration of star formation in the inner regions varies from galaxy to galaxy, and the extended central star formation in the dTrs produces the dichotomy between dSph and dTr galaxy types. The dTr galaxies show prominent radial stellar population gradients: The centers of these galaxies host young (≲ 1 Gyr) populations, while the age of the last formation event increases smoothly with increasing radius. This contrasts with the two dSph galaxies. Tucana shows a similar, but milder, gradient, but no gradient in age is detected Cetus. For the three galaxies with significant stellar population gradients, the exponential scale length decreases with time. These results are in agreement with outside-in scenarios of dwarf galaxy evolution, in which a quenching of the star formation toward the center occurs as the galaxy runs out of gas in the outskirts.

  6. The ACS LCID Project. VIII. The short-period Cepheids of Leo A

    CERN Document Server

    Bernard, Edouard J; Gallart, Carme; Fiorentino, Giuliana; Cassisi, Santi; Aparicio, Antonio; Cole, Andrew A; Drozdovsky, Igor; Hidalgo, Sebastian L; Skillman, Evan D; Stetson, Peter B; Tolstoy, Eline

    2013-01-01

    We present the results of a new search for variable stars in the Local Group dwarf galaxy Leo A, based on deep photometry from the Advanced Camera for Surveys onboard the Hubble Space Telescope. We detected 166 bona fide variables in our field, of which about 60 percent are new discoveries, and 33 candidate variables. Of the confirmed variables, we found 156 Cepheids, but only 10 RR Lyrae stars despite nearly 100 percent completeness at the magnitude of the horizontal branch. The RR Lyrae stars include 7 fundamental and 3 first-overtone pulsators, with mean periods of 0.636 and 0.366 day, respectively. From their position on the period-luminosity (PL) diagram and light-curve morphology, we classify 91, 58, and 4 Cepheids as fundamental, first-overtone, and second-overtone mode Classical Cepheids (CC), respectively, and two as population II Cepheids. However, due to the low metallicity of Leo A, about 90 percent of the detected Cepheids have periods shorter than 1.5 days. Comparison with theoretical models ind...

  7. The ACS LCID project. X. the star formation history of IC 1613: Revisiting the over-cooling problem

    International Nuclear Information System (INIS)

    We present an analysis of the star formation history (SFH) of a field near the half-light radius in the Local Group dwarf irregular galaxy IC 1613 based on deep Hubble Space Telescope Advanced Camera for Surveys imaging. Our observations reach the oldest main sequence turn-off, allowing a time resolution at the oldest ages of ∼1 Gyr. Our analysis shows that the SFH of the observed field in IC 1613 is consistent with being constant over the entire lifetime of the galaxy. These observations rule out an early dominant episode of star formation in IC 1613. We compare the SFH of IC 1613 with expectations from cosmological models. Since most of the mass is in place at early times for low-mass halos, a naive expectation is that most of the star formation should have taken place at early times. Models in which star formation follows mass accretion result in too many stars formed early and gas mass fractions that are too low today (the 'over-cooling problem'). The depth of the present photometry of IC 1613 shows that, at a resolution of ∼1 Gyr, the star formation rate is consistent with being constant, at even the earliest times, which is difficult to achieve in models where star formation follows mass assembly.

  8. THE ACS LCID PROJECT: ON THE ORIGIN OF DWARF GALAXY TYPES—A MANIFESTATION OF THE HALO ASSEMBLY BIAS?

    Energy Technology Data Exchange (ETDEWEB)

    Gallart, Carme; Monelli, Matteo; Aparicio, Antonio; Battaglia, Giuseppina; Drozdovsky, Igor; Hidalgo, Sebastian L. [Instituto de Astrofísica de Canarias, La Laguna, Tenerife (Spain); Mayer, Lucio [Institut für Theoretische Physik, University of Zurich, Zürich (Switzerland); Bernard, Edouard J. [Institute for Astronomy, University of Edinburgh, Royal Observatory, Blackford Hill, Edinburgh EH9 3HJ (United Kingdom); Cassisi, Santi [INAF-Osservatorio Astronomico di Collurania, Teramo (Italy); Cole, Andrew A. [School of Physical Sciences, University of Tasmania, Private Bag 37, Hobart, TAS 7005 (Australia); Dolphin, Andrew E. [Raytheon, 1151 E. Hermans Road, Tucson, AZ 85706 (United States); Navarro, Julio F. [Department of Physics and Astronomy, University of Victoria, PO Box 1700, STN CSC, Victoria, BC V8W 3P6 (Canada); Salvadori, Stefania [Kapteyn Astronomical Institute, Landleven 12, NL-9747 AD Groningen (Netherlands); Skillman, Evan D. [Minnesota Institute for Astrophysics, University of Minnesota, Minneapolis, MN (United States); Stetson, Peter B. [Herzberg Astronomy and Astrophysics, National Research Council Canada, 5071 West Saanich Road, Victoria, BC V9E 2E7 (Canada); Weisz, Daniel R., E-mail: monelli@iac.es [Astronomy Department, University of Washington, Box 351580, Seattle, WA (United States)

    2015-10-01

    We discuss how knowledge of the whole evolutionary history of dwarf galaxies, including details on the early star formation events, can provide insight on the origin of the different dwarf galaxy types. We suggest that these types may be imprinted by the early conditions of formation rather than only being the result of a recent morphological transformation driven by environmental effects. We present precise star formation histories of a sample of Local Group dwarf galaxies, derived from color–magnitude diagrams reaching the oldest main-sequence turnoffs. We argue that these galaxies can be assigned to two basic types: fast dwarfs that started their evolution with a dominant and short star formation event and slow dwarfs that formed a small fraction of their stars early and have continued forming stars until the present time (or almost). These two different evolutionary paths do not map directly onto the present-day morphology (dwarf spheroidal versus dwarf irregular). Slow and fast dwarfs also differ in their inferred past location relative to the Milky Way and/or M31, which hints that slow dwarfs were generally assembled in lower-density environments than fast dwarfs. We propose that the distinction between a fast and slow dwarf galaxy primarily reflects the characteristic density of the environment where they form. At a later stage, interaction with a large host galaxy may play a role in the final gas removal and ultimate termination of star formation.

  9. The ACS LCID project. X. The Star Formation History of IC 1613: Revisiting the Over-Cooling Problem

    CERN Document Server

    Skillman, Evan D; Weisz, Daniel R; Monelli, Matteo; Gallart, Carme; Aparicio, Antonio; Bernard, Edouard J; Boylan-Kolchin, Michael; Cassisi, Santi; Cole, Andrew A; Dolphin, Andrew E; Ferguson, Henry C; Mayer, Lucio; Navarro, Julio F; Stetson, Peter B; Tolstoy, Eline

    2014-01-01

    We present an analysis of the star formation history (SFH) of a field near the half light radius in the Local Group dwarf irregular galaxy IC 1613 based on deep Hubble Space Telescope Advanced Camera for Surveys imaging. Our observations reach the oldest main sequence turn-off, allowing a time resolution at the oldest ages of ~1 Gyr. Our analysis shows that the SFH of the observed field in IC 1613 is consistent with being constant over the entire lifetime of the galaxy. These observations rule out an early dominant episode of star formation in IC 1613. We compare the SFH of IC 1613 with expectations from cosmological models. Since most of the mass is in place at early times for low mass halos, a naive expectation is that most of the star formation should have taken place at early times. Models in which star formation follows mass accretion result in too many stars formed early and gas mass fractions which are too low today (the "over-cooling problem"). The depth of the present photometry of IC 1613 shows that...

  10. THE ACS LCID PROJECT. VII. THE BLUE STRAGGLERS POPULATION IN THE ISOLATED dSph GALAXIES CETUS AND TUCANA

    International Nuclear Information System (INIS)

    We present the first investigation of the Blue Straggler star (BSS) population in two isolated dwarf spheroidal galaxies of the Local Group, Cetus and Tucana. Deep Hubble Space Telescope/Advanced Camera for Surveys photometry allowed us to identify samples of 940 and 1214 candidates, respectively. The analysis of the star formation histories of the two galaxies suggests that both host a population of BSSs. Specifically, if the BSS candidates are interpreted as young main sequence stars, they do not conform to their galaxy's age-metallicity relationship. The analysis of the luminosity function and the radial distributions supports this conclusion, and suggests a non-collisional mechanism for the BSS formation, from the evolution of primordial binaries. This scenario is also supported by the results of new dynamical simulations presented here. Both galaxies coincide with the relationship between the BSS frequency and the absolute visual magnitude MV found by Momany et al. If this relationship is confirmed by larger sample, then it could be a valuable tool to discriminate between the presence of BSSs and galaxies hosting truly young populations.

  11. The ACS LCID Project: On the origin of dwarf galaxy types: a manifestation of the halo assembly bias?

    CERN Document Server

    Gallart, C; Mayer, L; Aparicio, A; Battaglia, G; Bernard, E J; Cassisi, S; Cole, A A; Dolphin, A E; Drozdovsky, I; HIdalgo, S L; Navarro, J F; Salvadori, S; Skillman, E D; Stetson, P B; Weisz, D R

    2015-01-01

    We discuss how knowledge of the whole evolutionary history of dwarf galaxies, including details on the early star formation events, can provide insight on the origin of the different dwarf galaxy types. We suggest that these types may be imprinted by the early conditions of formation rather than being only the result of a recent morphological transformation driven by environmental effects. We present precise star formation histories of a sample of Local Group dwarf galaxies, derived from colour-magnitude diagrams reaching the oldest main-sequence turnoffs. We argue that these galaxies can be assigned to two basic types: fast dwarfs that started their evolution with a dominant and short star formation event, and slow dwarfs that formed a small fraction of their stars early and have continued forming stars until the present time (or almost). These two different evolutionary paths do not map directly onto the present-day morphology (dwarf spheroidal vs dwarf irregular). Slow and fast dwarfs also differ in their ...

  12. The ACS LCID project. V. The Star Formation History of the Dwarf Galaxy \\objectname[]{LGS-3}: Clues for Cosmic Reionization and Feedback

    CERN Document Server

    Hidalgo, Sebastian L; Skillman, Evan; Monelli, Matteo; Gallart, Carme; Cole, Andrew; Dolphin, Andrew; Weisz, Daniel; Bernard, Edouard; Cassisi, Santi; Mayer, Lucio; Stetson, Peter; Tolstoy, Eline; Ferguson, Henry

    2011-01-01

    We present an analysis of the star formation history (SFH) of the transition-type (dIrr/dSph) Local Group galaxy \\objectname[]{LGS-3} (Pisces) based on deep photometry obtained with the {\\it Advanced Camera for Surveys} onboard the {\\it Hubble Space Telescope}. Our analysis shows that the SFH of \\objectname[]{LGS-3} is dominated by a main episode $\\sim 11.7$ Gyr ago with a duration of $\\sim$ 1.4 Gyr which formed $\\sim 90%$ of the stars. Subsequently, \\objectname[]{LGS-3} continued forming stars until the present, although at a much lower rate. The lack of early chemical enrichment is in contrast to that observed in the isolated dSph galaxies of comparable luminosity, implying that the dSphs were more massive and subjected to more tidal stripping. We compare the SFH of \\objectname[]{LGS-3} with expectations from cosmological models. Most or all the star formation was produced in \\objectname[]{LGS-3} after the reionization epoch, assumed to be completed at $z\\sim6$ or $\\sim 12.7$ Gyr ago. The total mass of the ...

  13. The ACS LCID Project XI. On the early time resolution of LG dwarf galaxy SFHs: Comparing the effects of reionization in models with observations

    CERN Document Server

    Aparicio, Antonio; Skillman, Evan; Cassisi, Santi; Mayer, Lucio; Navarro, Julio; Cole, Andrew; Gallart, Carme; Monelli, Matteo; Weisz, Daniel; Bernard, Edouard; Dolphin, Andrew; Stetson, Peter

    2016-01-01

    The analysis of the early star formation history (SFH) of nearby galaxies, obtained from their resolved stellar populations is relevant as a test for cosmological models. However, the early time resolution of observationally derived SFHs is limited by several factors. Thus, direct comparison of observationally derived SFHs with those derived from theoretical models of galaxy formation is potentially biased. Here we investigate and quantify this effect. For this purpose, we analyze the duration of the early star formation activity in a sample of four Local Group dwarf galaxies and test whether they are consistent with being true fossils of the pre-reionization era; i.e., if the quenching of their star formation occurred before cosmic reionization by UV photons was completed. Two classical dSph (Cetus and Tucana) and two dTrans (LGS-3 and Phoenix) isolated galaxies with total stellar masses between $1.3\\times 10^6$ to $7.2\\times 10^6$ M$_\\odot$ have been studied. Accounting for time resolution effects, the SFHs...

  14. The ACS LCID Project. XI. On the Early Time Resolution of SFHs of Local Group Dwarf Galaxies: Comparing the Effects of Reionization in Models with Observations

    Science.gov (United States)

    Aparicio, Antonio; Hidalgo, Sebastian L.; Skillman, Evan; Cassisi, Santi; Mayer, Lucio; Navarro, Julio; Cole, Andrew; Gallart, Carme; Monelli, Matteo; Weisz, Daniel; Bernard, Edouard; Dolphin, Andrew; Stetson, Peter

    2016-05-01

    The analysis of the early star formation history (SFH) of nearby galaxies, obtained from their resolved stellar populations, is relevant as a test for cosmological models. However, the early time resolution of observationally derived SFHs is limited by several factors. Thus, direct comparison of observationally derived SFHs with those derived from theoretical models of galaxy formation is potentially biased. Here we investigate and quantify this effect. For this purpose, we analyze the duration of the early star formation activity in a sample of four Local Group dwarf galaxies and test whether they are consistent with being true fossils of the pre-reionization era; i.e., if the quenching of their star formation occurred before cosmic reionization by UV photons was completed. Two classical dSph (Cetus and Tucana) and two dTrans (LGS-3 and Phoenix) isolated galaxies with total stellar masses between 1.3× {10}6 and 7.2× {10}6 {M}ȯ have been studied. Accounting for time resolution effects, the SFHs peak as much as 1.25 Gyr earlier than the optimal solutions. Thus, this effect is important for a proper comparison of model and observed SFHs. It is also shown that none of the analyzed galaxies can be considered a true fossil of the pre-reionization era, although it is possible that the outer regions of Cetus and Tucana are consistent with quenching by reionization. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with program #10505.

  15. The ACS LCID Project. XI. On the Early Time Resolution of SFHs of Local Group Dwarf Galaxies: Comparing the Effects of Reionization in Models with Observations

    Science.gov (United States)

    Aparicio, Antonio; Hidalgo, Sebastian L.; Skillman, Evan; Cassisi, Santi; Mayer, Lucio; Navarro, Julio; Cole, Andrew; Gallart, Carme; Monelli, Matteo; Weisz, Daniel; Bernard, Edouard; Dolphin, Andrew; Stetson, Peter

    2016-05-01

    The analysis of the early star formation history (SFH) of nearby galaxies, obtained from their resolved stellar populations, is relevant as a test for cosmological models. However, the early time resolution of observationally derived SFHs is limited by several factors. Thus, direct comparison of observationally derived SFHs with those derived from theoretical models of galaxy formation is potentially biased. Here we investigate and quantify this effect. For this purpose, we analyze the duration of the early star formation activity in a sample of four Local Group dwarf galaxies and test whether they are consistent with being true fossils of the pre-reionization era; i.e., if the quenching of their star formation occurred before cosmic reionization by UV photons was completed. Two classical dSph (Cetus and Tucana) and two dTrans (LGS-3 and Phoenix) isolated galaxies with total stellar masses between 1.3× {10}6 and 7.2× {10}6 {M}⊙ have been studied. Accounting for time resolution effects, the SFHs peak as much as 1.25 Gyr earlier than the optimal solutions. Thus, this effect is important for a proper comparison of model and observed SFHs. It is also shown that none of the analyzed galaxies can be considered a true fossil of the pre-reionization era, although it is possible that the outer regions of Cetus and Tucana are consistent with quenching by reionization. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with program #10505.

  16. Transformation through research? The AC+erm Project and Electronic Records Management

    OpenAIRE

    Hardiman, Rachel; Childs, Sue; McLeod, Julie

    2009-01-01

    The article focuses on the three-year project being undertaken by Northumbria University in Northumbria, England and funded by the Arts & Humanities Research Council (ANRH) named as AC+erm. The AC+erm project is a qualitative study composed of three main phases including a comprehensive Systematic Literature Review, an investigation of the three aspects of designing an architecture for electronic records management (ERM), and distribution of findings. The primary data from selected experts ar...

  17. Low AC Loss in a 3 kA HTS Cable of the Dutch Project

    DEFF Research Database (Denmark)

    Chevtchenko, Oleg; Zuijderduin, Roy; Smit, Johan;

    2012-01-01

    Requirements for a 6km long high temperature superconducting (HTS) AC power cable of the Amsterdam project are: a cable has to fit in an annulus of 160mm, with two cooling stations at the cable ends only. Existing solutions for HTS cables would lead to excessively high coolant pressure drop...... in the cable, potentially affecting public acceptance of the project. A way out would be to substantially reduce AC losses from 1 down to about 0.1W/m per phase at rated current of 3 kArms, frequency of 50Hz and temperature of 77K. In this paper we discuss a strategy towards this ambitious goal, a concept...... design of the single phase cable 3 kA conductor made of YBCO tapes and present corresponding experimental and simulation data supporting the developed approach leading directly to this goal. HTS cable model was made that show a drastically reduced AC loss. The low loss was achieved by using appropriate...

  18. Project Completion Report on China's Room AC Reach Standard

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jiang

    2005-03-10

    After much anticipation and hard work, China's reach standard for room air-conditioners was announced in September 2004, with the first tier going into effect on March 1, 2005 and the reach standard taking effect on January 1, 2009. This is a major milestone in the development of minimum energy efficiency standards in China: finally China has set a minimum standard that is meaningful and stringent. According to our preliminary analysis, the majority of room ACs products on the Chinese market in 2004 would not meet the 2009 reach standard requirement. In addition to setting the minimum requirement, China's new AC standard also include classification requirement for the newly established Energy Information Label, as well as the certification requirement for CECP's Energy Conservation Label. Highlights of the 2009 reach standard include: (1) The Chinese Reach Standard for Room AC in 2009 is tighter than American counterpart, and almost matches the efficiency of American Central Air-Conditioners; and (2) Summer peak demand reduction in 2020 due to the reach standard exceeds the capacity of the Three Gorges Project.

  19. Library Electronic Resource Sharing Among Liberal Arts Colleges: ACS Palladian Alliance Project

    Directory of Open Access Journals (Sweden)

    Wenxian Zhang

    1997-03-01

    Full Text Available 無Effective electronic resource sharing is critical to library information services of the 1990s. Explosion of data and increased cost of information force libraries to work together, and technological advancements present the library service profession a platform for resource sharing. The Palladian Alliance Project of the Associated Colleges of the South is designed to provides ACS member institutions an effective means to enhance information access for their faculty and students, and achieve significant cost containment in the years to come.

  20. Antennas Designed for Advanced Communications for Air Traffic Management (AC/ATM) Project

    Science.gov (United States)

    Zakrajsek, Robert J.

    2000-01-01

    The goal of the Advanced Communications for Air Traffic Management (AC/ATM) Project at the NASA Glenn Research Center at Lewis Field is to enable a communications infrastructure that provides the capacity, efficiency, and flexibility necessary to realize a mature free-flight environment. The technical thrust of the AC/ATM Project is targeted at the design, development, integration, test, and demonstration of enabling technologies for global broadband aeronautical communications. Since Ku-band facilities and equipment are readily available, one of the near-term demonstrations involves a link through a Kuband communications satellite. Two conformally mounted antennas will support the initial AC/ATM communications links. Both of these are steered electronically through monolithic microwave integrated circuit (MMIC) amplifiers and phase shifters. This link will be asymmetrical with the downlink to the aircraft (mobile vehicle) at a throughput rate of greater than 1.5 megabits per second (Mbps), whereas the throughput rate of the uplink from the aircraft will be greater than 100 kilobits per second (kbps). The data on the downlink can be narrow-band, wide-band, or a combination of both, depending on the requirements of the experiment. The AC/ATM project is purchasing a phased-array Ku-band transmitting antenna for the uplink from the test vehicle. Many Ku-band receiving antennas have been built, and one will be borrowed for a short time to perform the initial experiments at the NASA Glenn Research Center at Lewis Field. The Ku-band transmitting antenna is a 254-element MMIC phased-array antenna being built by Boeing Phantom Works. Each element can radiate 100 mW. The antenna is approximately 43-cm high by 24-cm wide by 3.3-cm thick. It can be steered beyond 60 from broadside. The beamwidth varies from 6 at broadside to 12 degrees at 60 degrees, which is typical of phased-array antennas. When the antenna is steered to 60 degrees, the beamwidth will illuminate

  1. Ranking transmission projects in large scale systems using an AC power flow model; Priorizacao de obras em sistemas de grande porte usando um modelo AC da rede

    Energy Technology Data Exchange (ETDEWEB)

    Melo, A.C.G. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Fontoura Filho, R.N. [ELETROBRAS, Rio de Janeiro, RJ (Brazil); Peres, L.A.P. Pecorelli [FURNAS, Rio de Janeiro, RJ (Brazil); Morozowski Filho, M. [Santa Catarina Univ., Florianopolis, SC (Brazil)

    1994-12-31

    Initially, this paper summarizes the approach developed by the Brazilian Planning Criteria Working Group (GTCP/ELETROBRAS) for identifying which subset of transmission investments should be postponed to meet a pre-stablished budget constraint with the least possible impact on system performance. Next, this paper presents the main features of the computational model PRIO, which allows the application of the ranking process to large scale power systems (2,000 buses and 3,000 circuits), with as many as 100 projects to be ranked. In this model, the adequacy analysis of each system state is carried out through an AC power flow coupled to a successive linear programming based remedial actions model. Case studies with the IEEE-RTS system and a configuration of the Brazilian Southeastern are presented and discussed. (author) 7 refs., 6 figs., 5 tabs.

  2. NCDC International Best Track Archive for Climate Stewardship (IBTrACS) Project, Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The International Best Track Archive for Climate Stewardship (IBTrACS) dataset was developed by the NOAA National Climatic Data Center, which took the initial step...

  3. Design studies for the Mead-Phoenix 500 kV AC transmission project

    Energy Technology Data Exchange (ETDEWEB)

    Thallam, R.S.; Lundquist, T.G.; Gerlach, D.W. [Salt River Project, Phoenix, AZ (United States); Atmuri, S.R. [Teshmont Consultants Inc., Winnipeg, Manitoba (Canada); Selin, D.A. [Arizona Public Service Co., Phoenix, AZ (United States)

    1995-10-01

    The Mead-Phoenix 500 kV ac line is 243 miles long and runs parallel to the existing Mead-Liberty 345 kV line. This line is planned for 70% series and 70% shunt compensation; it also incorporates the first application of a 50 kV phase shifting transformer that enables a 1,300 MW transmission capacity. This paper presents the design studies that were undertaken in arriving at the equipment ratings and insulation levels that lead to the equipment specifications. The shunt reactor switching requirements utilizing MOV across the breaker, line switching with line connected arresters and the breaker transient recovery voltage are also dealt with in the paper.

  4. ACS: ALMA Common Software

    Science.gov (United States)

    Chiozzi, Gianluca; Šekoranja, Matej

    2013-02-01

    ALMA Common Software (ACS) provides a software infrastructure common to all ALMA partners and consists of a documented collection of common patterns and components which implement those patterns. The heart of ACS is based on a distributed Component-Container model, with ACS Components implemented as CORBA objects in any of the supported programming languages. ACS provides common CORBA-based services such as logging, error and alarm management, configuration database and lifecycle management. Although designed for ALMA, ACS can and is being used in other control systems and distributed software projects, since it implements proven design patterns using state of the art, reliable technology. It also allows, through the use of well-known standard constructs and components, that other team members whom are not authors of ACS easily understand the architecture of software modules, making maintenance affordable even on a very large project.

  5. Low AC Loss in a 3 kA HTS Cable of the Dutch Project

    NARCIS (Netherlands)

    Chevtchenko, O.; Zuijderduin, R.; Smit, J.; Willen, D.; Lentge, H.; Thidemann, C.; Traeholt, C.; Melnik, I.; Geschiere, A.

    2012-01-01

    are: a cable has to fit in an annulus of 160 mm, with two cooling stations at the cable ends only. Existing solutions for HTS cables would lead to excessively high coolant pressure drop in the cable, potentially affecting public acceptance of the project. A way out would be to substantially reduce A

  6. Staking-out projected boundaries of natural property Vršac Mountains using the RTK GPS/glonass method

    Directory of Open Access Journals (Sweden)

    Gučević Jelena

    2012-01-01

    Full Text Available The existing topographic and cadastral maps of the former Yugoslav republics are in Gauss-Krüger projection on Bessel ellipsoid. For the collected GPS data to comply with the existing cartographic material, it is necessary to provide the transformation parameters from WGS84 to Bessel ellipsoid and according to the principles of cartographic mapping, to make mappings in the plane of the State Coordinate System (SCS. The aim of this research is to present the surveying activities necessary for the establishment and maintenance of digital cartographic basis, which is shown in the test area of “VRŠAC MOUNTAINS”, a Serbian region with outstanding characteristics. In order to establish a connection between the collected data, it is necessary to primarily calculate the parameters of transformation from WGS84 into the SCS. After the vectorisation of projected boundaries from bases made in the SCS, the transformation of vectorised boundary lines from SCS into the WGS84 is carried out, followed by staking the boundaries. To understand the fundamental differences in the methodology of using GPS receivers, it is important to emphasise that the concept of GPS determination of the coordinates is generally divided into absolute and relative positioning. If the correct procedure of GPS positioning, applied to certain environmental conditions, is not followed, the error up to 200 m could be expected. Conclusions are drawn about the selection of staking methods, related to the applied instruments and specific field conditions. The stakeout procedures are given in accordance with the principles of geodetic positioning. [Projekat Ministarstva nauke Republike Srbije, br. 043007: Istraživanje klimatskih promena i njihovog uticaja na životnu sredinu: praćenje uticaja, adaptacija i ublažavanje

  7. Selection of topologies for the PHOTONERGY{sup TM} project. Optimised design and control of inverter for photovoltaic systems: the AC-module

    Energy Technology Data Exchange (ETDEWEB)

    Baekhoej Kjaer, S.

    2002-06-01

    The PHOTONERGY{sup TM} project (also known as the former 'SolcelleInverter' project) is by this report carried into its third stage; the selection of a suitable topology for the AC-Module inverter. The selection of a suitable topology is based on State-Of-The-Art analysis a specifications and a comparison of four grid-tied inverters and nine dc/dc converters. This implies 23 possible combinations, from which nine is investigated with respect to efficiency in six working points, the number of components and to some extent also the rating of the components. The conclusion is that the target of a European efficiency of 93.7% is hard to achieve. But four of the examined, and two newly discovered, inverters are recommended for a further examination by means of estimations, calculations and simulations of: cost, complexity, robustness, efficiency and mass-production. The system-layout is also examined. The first layout implies that the PV-Module and the inverter is integrated into one unit and the second layout involves that the inverter is placed indoor. The layouts are compared with respect to cable-losses, enclosure demanding and lifetime. The conclusion is somehow ambiguous and a further investigation should be initiated in order to get a clear result. (au)

  8. Modeling of long High Voltage AC Underground

    DEFF Research Database (Denmark)

    Gudmundsdottir, Unnur Stella; Bak, Claus Leth; Wiechowski, W. T.

    2010-01-01

    This paper presents the work and findings of a PhD project focused on accurate high frequency modelling of long High Voltage AC Underground cables. The project is cooperation between Aalborg University and Energinet.dk. The objective of the project is to investigate the accuracy of most up to date...

  9. Peltier ac calorimeter

    OpenAIRE

    Jung, D. H.; Moon, I. K.; Jeong, Y. H.

    2001-01-01

    A new ac calorimeter, utilizing the Peltier effect of a thermocouple junction as an ac power source, is described. This Peltier ac calorimeter allows to measure the absolute value of heat capacity of small solid samples with sub-milligrams of mass. The calorimeter can also be used as a dynamic one with a dynamic range of several decades at low frequencies.

  10. ACAC Converters for UPS

    Directory of Open Access Journals (Sweden)

    Rusalin Lucian R. Păun

    2008-05-01

    Full Text Available This paper propose a new control technique forsingle – phase ACAC converters used for a on-line UPSwith a good dynamic response, a reduced-partscomponents, a good output characteristic, a good powerfactorcorrection(PFC. This converter no needs anisolation transformer. A power factor correction rectifierand an inverter with the proposed control scheme has beendesigned and simulated using Caspoc2007, validating theconcept.

  11. AC power supply systems

    International Nuclear Information System (INIS)

    An ac power supply system includes a rectifier fed by a normal ac supply, and an inverter connected to the rectifier by a dc link, the inverter being effective to invert the dc output of the receiver at a required frequency to provide an ac output. A dc backup power supply of lower voltage than the normal dc output of the rectifier is connected across the dc link such that the ac output of the rectifier is derived from the backup supply if the voltage of the output of the inverter falls below that of the backup supply. The dc backup power may be derived from a backup ac supply. Use in pumping coolant in nuclear reactor is envisaged. (author)

  12. Flexible AC transmission systems: the state of the art

    Energy Technology Data Exchange (ETDEWEB)

    Edris, Abdel-Aty [Electric Power Research Inst., Palo Alto, CA (United States). Electric Systems Division

    1994-12-31

    Flexible AC transmission systems (FACTS) is a concept promoting the use of power electronic controllers to enhance the controllability and usable capacity of AC transmission. This paper presents the state of the art of FACTS and the status of the current projects for the application of the FACTS controllers in transmission systems. (author) 8 refs., 8 figs.

  13. Composite Based EHV AC Overhead Transmission Lines

    DEFF Research Database (Denmark)

    Sørensen, Thomas Kjærsgaard

    and analysed with regard to the possibilities, limitations and risks widespread application of composite materials on EHV AC overhead transmission lines may present. To form the basis for evaluation of the useability of composite materials, dierent overhead line projects aimed at reducing the environmental...

  14. AC1 Wing

    Directory of Open Access Journals (Sweden)

    Adrian DOBRE

    2010-03-01

    Full Text Available The AC1 wing replaces the old wing of the wind tunnel model AEROTAXI, which has been made at scale 1:9. The new wing is part of CESAR program and improves the aerodynamic characteristics of the old one. The geometry of the whole wing was given by FOI Sweden and position of AC1 wing must coincide with the structure of the AEROTAXI model.

  15. AC1 Wing

    OpenAIRE

    Adrian DOBRE

    2010-01-01

    The AC1 wing replaces the old wing of the wind tunnel model AEROTAXI, which has been made at scale 1:9. The new wing is part of CESAR program and improves the aerodynamic characteristics of the old one. The geometry of the whole wing was given by FOI Sweden and position of AC1 wing must coincide with the structure of the AEROTAXI model.

  16. Isolation of sequences flanking Ac insertion sites by Ac casting.

    Science.gov (United States)

    Wang, Dafang; Peterson, Thomas

    2013-01-01

    Localizing Ac insertions is a fundamental task in studying Ac-induced mutation and chromosomal rearrangements involving Ac elements. Researchers may sometimes be faced with the situation in which the sequence flanking one side of an Ac/Ds element is known, but the other flank is unknown. Or, a researcher may have a small sequence surrounding the Ac/Ds insertion site and needs to obtain additional flanking genomic sequences. One way to rapidly clone unknown Ac/Ds flanking sequences is via a PCR-based method termed Ac casting. This approach utilizes the somatic transposition activity of Ac during plant development, and provides an efficient means for short-range genome walking. Here we describe the principle of Ac casting, and show how it can be applied to isolate Ac macrotransposon insertion sites.

  17. State of the Art analysis for the 'SolcelleInverter' project. Optimised design and control of inverter for photovoltaic systems: the AC-module

    Energy Technology Data Exchange (ETDEWEB)

    Baekhoej Kjaer, S.

    2002-02-01

    The 'SolcelleInverter' project starts with this state-of-the-art analysis of 27 different inverter topologies for use in photovoltaic applications. The main concern is the present status for inverters for single solar modules. Technologies for larger clusters of modules are also investigated. The possibility of combining a small decentralised and a big centralised unit is as well investigated. A series of topologies are discovered and this paper will present them. That includes solutions with and without transformers, systems for one or multiple modules, commercial solutions and solutions found in scientific papers and patents. (au)

  18. AC-3 audio coder

    Science.gov (United States)

    Todd, Craig

    1995-12-01

    AC-3 is a system for coding up to 5.1 channels of audio into a low bit-rate data stream. High quality may be obtained with compression ratios approaching 12-1 for multichannel audio programs. The high compression ratio is achieved by methods which do not increase decoder memory, and thus cost. The methods employed include: the transmission of a high frequency resolution spectral envelope; and a novel forward/backward adaptive bit allocation algorithm. In order to satisfy practical requirements of an emissions coder, the AC-3 syntax includes a number of features useful to broadcasters and consumers. These features include: loudness uniformity between programs; dynamic range control; and broadcaster control of downmix coefficients. The AC-3 coder has been formally selected for inclusion of the U.S. HDTV broadcast standard, and has been informally selected for several additional applications.

  19. AC/RF Superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [JLAB

    2015-02-01

    This contribution provides a brief introduction to AC/RF superconductivity, with an emphasis on application to accelerators. The topics covered include the surface impedance of normal conductors and superconductors, the residual resistance, the field dependence of the surface resistance, and the superheating field.

  20. Hermetisk AC-Krets

    OpenAIRE

    Hirsch, Carl; Smirnoff, Alexander

    2007-01-01

    Under sex månader våren 2007 har ett samarbete mellan Volvo Lastvagnar och två studenter från KTH, inriktning Integrerad produktutveckling vid institutionen för maskinkonstruktion, pågått i form av ett examensarbete på 20 poäng. Dagens AC-system i Volvos lastbilar avger 20-40 g/år av köldmediet R134a som är en kraftfull växthusgas. Detta sker främst genom diffusion via slangar och tätningsmaterial. Syftet med detta examensarbete är att ta fram förslag på tekniska lösningar på ett nytt AC-syst...

  1. Increased Ac excision (iae): Arabidopsis thaliana mutations affecting Ac transposition

    International Nuclear Information System (INIS)

    The maize transposable element Ac is highly active in the heterologous hosts tobacco and tomato, but shows very much reduced levels of activity in Arabidopsis. A mutagenesis experiment was undertaken with the aim of identifying Arabidopsis host factors responsible for the observed low levels of Ac activity. Seed from a line carrying a single copy of the Ac element inserted into the streptomycin phosphotransferase (SPT) reporter fusion, and which displayed typically low levels of Ac activity, were mutagenized using gamma rays. Nineteen mutants displaying high levels of somatic Ac activity, as judged by their highly variegated phenotypes, were isolated after screening the M2 generation on streptomycin-containing medium. The mutations fall into two complementation groups, iae1 and iae2, are unlinked to the SPT::Ac locus and segregate in a Mendelian fashion. The iae1 mutation is recessive and the iae2 mutation is semi-dominant. The iae1 and iae2 mutants show 550- and 70-fold increases, respectively, in the average number of Ac excision sectors per cotyledon. The IAE1 locus maps to chromosome 2, whereas the SPT::Ac reporter maps to chromosome 3. A molecular study of Ac activity in the iae1 mutant confirmed the very high levels of Ac excision predicted using the phenotypic assay, but revealed only low levels of Ac re-insertion. Analyses of germinal transposition in the iae1 mutant demonstrated an average germinal excision frequency of 3% and a frequency of independent Ac re-insertions following germinal excision of 22%. The iae mutants represents a possible means of improving the efficiency of Ac/Ds transposon tagging systems in Arabidopsis, and will enable the dissection of host involvement in Ac transposition and the mechanisms employed for controlling transposable element activity

  2. AC-130H Gunship Armor Upgrade Project

    Energy Technology Data Exchange (ETDEWEB)

    Shell, T.E.; Landingham, R.L.

    1990-09-19

    This report covers the test methods and equipment for testing aircraft armor both hard and soft. The hard armor are the typical ceramic type while the soft armor are various types of layered composite materials. 10 figs. (JEF)

  3. Software Development for ALMA in Chile: The ACS-UTFSM Group.

    Science.gov (United States)

    von Brand, H. H.

    ALMA Common Software (ACS) provides a common software framework for ALMA, the Atacama Large Millimeter Array in Chile. ACS is a collection of well-documented patterns for controlling systems and a set of components written to those patterns. In its core, ACS is a distributed, object-oriented system, written on top of CORBA. The ACS-UTFSM Group started as some students of informatics did summer jobs at the La Silla Observatory of ESO, where they became acquainted with ACS. Their interest led them to continue working on ACS on their own, and they eventually became official developers of the package. Now the group is being funded by project ALMA-CONICYT 31060008 ``Software Development for ALMA: Building Up Expertise to Meet ALMA Software Requirements within a Chilean University''. Several members of the original group are now working for ALMA, which fullfills one of the goals of the project. Some parts of ACS developed by the ACS-UTFSM Group include H3E (Hardware End-to-End Example), a Lego model of a telescope and its controlling software for training and demonstration purposes; and CDBChecker, a tool to verify the consistency of the configuration database for a ACS deployment. Currently we are working towards a general framework for telescope control using ACS, in order to simplify the deployment of new instruments; and repackaging ACS so it is easier to install and use. A master's thesis is exploring the real-time requirements of ACS.

  4. Development of the Field of Flexible AC Transmission Systems (FACTS)

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@ Theoretical and technological development of large capacity power electronics and flexible AC transmission systems are one of the most important projects developed by Tsinghua University. The Flexible AC Transmission System (FACTS) technology which uses power electronics to improve the efficiency and quality of the electrical generation, transmission and distribution system is considered to be one of the most significant technological innovations for power systems in the 20th century. The advanced static var generator (ASVG) is a key FACTS device.

  5. High performance AC drives

    CERN Document Server

    Ahmad, Mukhtar

    2010-01-01

    This book presents a comprehensive view of high performance ac drives. It may be considered as both a text book for graduate students and as an up-to-date monograph. It may also be used by R & D professionals involved in the improvement of performance of drives in the industries. The book will also be beneficial to the researchers pursuing work on multiphase drives as well as sensorless and direct torque control of electric drives since up-to date references in these topics are provided. It will also provide few examples of modeling, analysis and control of electric drives using MATLAB/SIMULIN

  6. AC Optimal Power Flow

    Energy Technology Data Exchange (ETDEWEB)

    2016-10-04

    In this work, we have implemented and developed the simulation software to implement the mathematical model of an AC Optimal Power Flow (OPF) problem. The objective function is to minimize the total cost of generation subject to constraints of node power balance (both real and reactive) and line power flow limits (MW, MVAr, and MVA). We have currently implemented the polar coordinate version of the problem. In the present work, we have used the optimization solver, Knitro (proprietary and not included in this software) to solve the problem and we have kept option for both the native numerical derivative evaluation (working satisfactorily now) as well as for analytical formulas corresponding to the derivatives being provided to Knitro (currently, in the debugging stage). Since the AC OPF is a highly non-convex optimization problem, we have also kept the option for a multistart solution. All of these can be decided by the user during run-time in an interactive manner. The software has been developed in C++ programming language, running with GCC compiler on a Linux machine. We have tested for satisfactory results against Matpower for the IEEE 14 bus system.

  7. Switching Tests of Energized GIS Disconnectors in UHV AC Pilot Demonstration Project%特高压交流试验示范工程GIS隔离开关带电操作试验

    Institute of Scientific and Technical Information of China (English)

    李志兵; 陈维江; 王浩; 孙岗; 张翠霞; 刘洪涛; 马国明; 岳功昌; 胡榕; 时卫东; 孙泽来; 张建功

    2012-01-01

    In order to verify the safety of switching of gas insulated switchgear (GIS) disconnectors energized in ultra high voltage(UHV) AC Pilot Demonstration Project, we experimentally investigated switching of all GIS disconnectors energized in Changzhi, Nanyang, and Jingmen substations, and monitored very fast transient overvoltage (VFTO) and transient enclosure voltage (TEV) generated . The tests results show that switching of UHV GIS disconnectors energized is safe, the effect of TEV on secondary equipment should be paid attention to, and damping resistor in disconnector can mitigate VFTO and TEV significantly, The tests provide technical support for the future switching of GIS disconnector energized in UHV substations.%为验证我国特高压交流试验示范工程金属封闭开关设备(gas insulated switchgear,GIS)中隔离开关带电操作的安全性,在长治、南阳和荆门变电站对所有特高压GIS隔离开关进行了带电操作试验。在前期特高压GIS和复合型气体绝缘金属封闭开关设备(hypid gas insulated switchgear,HGIS)中特快速瞬态过电压(very fast transi-ent overvoltage,VFTO)实测研究基础上,开展现场典型运行方式下隔离开关带电操作,监测产生的VFTO和暂态壳体电位(transient enclosure voltage,TEV)。试验初步得出了特高压变电站实际VFTO和TEV水平及分布,结果表明:特高压GIS隔离开关的带电操作是安全的,但应注意产生的TEV对二次设备的影响,阻尼电阻能够有效抑制VFTO和TEV。带电操作试验的开展为今后特高压GIS隔离开关的带电操作提供了依据。

  8. Single-Phase Direct AC-AC Boost Converter

    Directory of Open Access Journals (Sweden)

    LUCANU, M.

    2014-08-01

    Full Text Available The paper presents a single-phase direct AC-AC boost converter. The circuit of the converter is simple and it has good performances, irrespective of the load nature. The adequate functioning and high performance of the circuit (the efficiency and waveform of the absorbed input current were tested both by simulation and experimentally.

  9. Ac Hybrid Charge Controller

    Directory of Open Access Journals (Sweden)

    Shalini S. Durgam

    2015-03-01

    Full Text Available One of the primary needs for socio-economic development in any nation in the world is the provision of reliable electricity supply systems with lower carbon footprint levels. The purpose of this work is the development of a hybrid Power system that harnesses the renewable energy in sun and electricity to generate electricity. The working model can able to run on dual mode- solar and electricity. It can also be driven independently either by solar or electricity. The battery can be charge from solar panel (40W or by power supply. The household single phase A.C. power supply of 230V is converted into 12V D.C. using step down transformer and rectifying circuit. The working model can achieve energy saving, low carbon emission, environmental protection for the upcoming future of human life.

  10. 云广直流±800kV交流滤波器的电阻过负荷保护%Overload Protection of ± 800 kV AC Filter Resistor in Yunnan - Guangdong DC Project

    Institute of Scientific and Technical Information of China (English)

    徐峰; 吕涛; 曹继丰

    2011-01-01

    高压直流换流站在进行滤波器组投切时往往会对小组中电阻器产生较大的冲击电流,并造成滤波器电阻过负荷异常动作.比较了不同型号的滤波器投切时在电阻上产生的冲击电流,分析产生该电流的原因,推导该电流随时间衰减关系.然后,对滤波器电阻过负荷异常动作提出改进意见.%A great inrush current in the AC filter resistor caused by the sub-bank breaker closing and opening in HVDC converter stations could produce abnormal trip of the AC filter protection. This article contrasts the inrush currents in different kinds of AC filter resistor when the breaker closing and opening, analyzes the cause of the inrush current, and deduces the current decay with time. Then suggestions are given to improve the overload protection abnormal trip of AC filter Resistor.

  11. Operation Method for AC Motor Control during Power Interruption in Direct AC/AC Converter System

    Science.gov (United States)

    Shizu, Keiichiro; Azuma, Satoshi

    Direct AC/AC converters have been studied due to their potential use in power converters with no DC-link capacitor, which can contribute to the miniaturization of power converters. However, the absence of a DC-link capacitor makes it difficult to control the AC motor during power interruption. First, this paper proposes a system that realizes AC motor control during power interruption by utilizing a clamp capacitor. In general, direct AC/AC converters have a clamp circuit consisting of a rectifier diode(s) and a clamp capacitor in order to avoid over-voltages. In the proposed system, there is an additional semiconductor switch reverse-parallel to the rectifier diode(s), and the clamp capacitor voltage can be utilized for AC motor control by turning on the additional switch. Second, this paper discusses an operation method for AC motor control and clamp capacitor voltage control during power interruption. In the proposed method “DC-link voltage control”, the kinetic energy in the AC motor is transformed into electrical energy and stored in the clamp capacitor; the clamp capacitor is therefore charged and the capacitor voltage is controlled to remain constant at an instruction value. Third, this paper discusses a switching operation during power interruption. A dead-time is introduced between the operation of turning off all switches on the rectifier side and the operation of turning on the additional switch, which prevents the occurrence of a short circuit between the interrupted power source and the clamp capacitor. Finally, experimental results are presented. During power interruptions, an output current was continuously obtained and the clamp capacitor voltage was maintained to be equal to the instruction value of the capacitor voltage. These results indicate that both AC motor control and capacitor voltage control were successfully achieved by using the proposed system.

  12. ACS CCD Stability Monitor

    Science.gov (United States)

    Grogin, Norman

    2012-10-01

    A moderately crowded stellar field in the cluster 47 Tuc {6 arcmin West of the cluster core} is observed every four months with the WFC. The first visit exercises the full suite of broad and narrow band imaging filters and sub-array modes; following visits observe with only the six most popular Cycle 18 filters in full-frame mode. The positions and magnitudes of objects will be used to monitor local and large scale variations in the plate scale and the sensitivity of the detectors and to derive an independent measure of the detector CTE. One exposure in each sub-array mode with the WFC will allow us to verify that photometry obtained in full-frame and in sub-array modes are repeatable to better than 1%. This test is important for the ACS Photometric Cross-Calibration program, which uses sub-array exposures. This program may receive additional orbits to investigate ORIENT-dependent geometric distortion, which motivates the ORIENT and BETWEEN requirement on the first visit.

  13. AC drives for industrial plants. Plant kudoyo AC drive sochi

    Energy Technology Data Exchange (ETDEWEB)

    Miyazaki, M.; Shibata, M.; Yamada, S. (Toshiba Corp., Tokyo (Japan))

    1992-08-01

    Features and product series of AC drives for industrial plants were outlined. Configurations and features of various types of AC drives were briefly discussed which are put into market to meet various requirements for industrial plants and wide ranges of output voltage and capacity. The following product series were outlined; the power bipolar transistor inverter for 3.5-600 kVA in output capacity, IGBT inverter for AC 400 V in output voltage and 1,000 kVA or less, GTO inverter for AC 600 V and 700-2,000 kVA, and cycloconverter for AC 1,000-3,000 V and 1,000 kW-20 MW. The following subjects were outlined as current technical trends of AC drives for industrial plants; increasing in capacity of voltage-source PWM inverters, downsizing of converters through highly efficient cooling and highly dense mounting, spreading of sensorless vector controls, and development of high-voltage large-capacity PWM inverters. 6 figs., 2 tabs.

  14. Partial AC-coupling minigrids

    Energy Technology Data Exchange (ETDEWEB)

    Moix, Pierre-Olivier; Ruchet, Claude [Studer Innotec, Sion (Switzerland)

    2010-07-01

    Partial AC-coupling: - It is feasible to make AC-coupling of some compatible elements without V/f droops. Standard elements available on the market were tested. - Optimum design for efficiency is a share of the solar modules between DC-coupling with a solar charger and AC-coupling with a grid inverter according to the load profile. - Partial AC-coupling is better in term of robustness; it is more reliable to have at least a part of the solar production connected directly to DC, or even only DC coupling. The presented concepts are not only theoretical but were implemented and tested on real products available on the market. Many tests have been done to find out the limits and problems that can occur with the use of grid connected and stand alone inverter together. Many combinations were tested and it was found robust enough to be used in the field with the precautions mentioned about microcycling. (orig.)

  15. AcTA: Accessdatabase Telen met toekomst - Alterra

    OpenAIRE

    Smit, A.; Zwart, K.B.

    2003-01-01

    Binnen het project Telen met toekomst wordt een groot aantal metingen verricht, die op een overzichtelijke manier moeten worden opgeslagen. Er is gekozen voor en relationele database in MS-Access. De database zal AcTA worden genoemd (Access-database voor Telen met toekomst Alterra). Dit rapport bevat de beschrijving van de structuur van de database.

  16. An overview of the ALMA Common Software (ACS) .

    Science.gov (United States)

    Di Marcantonio, P.; Cirami, R.; Caproni, A.; Chiozzi, G.; Jeram, B.; Sommer, H.; Harrington, S.; Zagar, K.; Plesko, M.; Sekoranja, M.

    The ALMA Common Software (ACS) is an application framework designed to provide a common and homogeneous software architecture and infrastructure, spanning the end to end needs of an Astronomical observatory, from the Telescope Control system to high-level data flow management. ACS offers, at the lower level, several basic services needed for object-oriented distributed computing like transparent remote object invocation, object deployment and location, distributed error, alarm handling, logging and events. On top of this it provides an application architecture based on the Component/Container paradigm that fosters sharing and reusing of software components. Although developed for the ALMA project, ACS is now used by several other projects worldwide, among which the Italian Sardinia Radio Telescope (SRT). Besides, there is an active community that shares ideas, concepts and actual software components. Major drivers for this diffusion were the choice of adopting the LGPL public license and the adoption of CORBA, a free but reliable and widely used middleware software. In this paper we present an overview of the main features of ACS, emphasizing in particular the role of INAF-OAT in this project.

  17. Hopping models and ac universality

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2002-01-01

    Some general relations for hopping models are established. We proceed to discuss the universality of the ac conductivity which arises in the extreme disorder limit of the random barrier model. It is shown that the relevant dimension entering into the diffusion cluster approximation (DCA) is the h......Some general relations for hopping models are established. We proceed to discuss the universality of the ac conductivity which arises in the extreme disorder limit of the random barrier model. It is shown that the relevant dimension entering into the diffusion cluster approximation (DCA......) is the harmonic (fracton) dimension of the diffusion cluster. The temperature scaling of the dimensionless frequency entering into the DCA is discussed. Finally, some open problems regarding ac universality are listed....

  18. HVDC-AC system interaction from AC harmonics. Volume 1. Harmonic impedance calculations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Breuer, G D; Chow, J H; Lindh, C B; Miller, N W; Numrich, F H; Price, W W; Turner, A E; Whitney, R R

    1982-09-01

    Improved methods are needed to characterize ac system harmonic behavior for ac filter design for HVDC systems. The purpose of this General Electric Company RP1138 research is to evaluate the present filter design practice and to investigate methods for calculating system harmonic impedances. An overview of ac filter design for HVDC systems and a survey of literature related to filter design have been performed. Two methods for calculating system harmonic impedances have been investigated. In the measurement method, an instrumentation system for measuring system voltage and current has been assembled. Different schemes of using the measurements to calculate system harmonic impedances have been studied. In the analytical method, a procedure to include various operating conditions has been proposed. Computer programs for both methods have been prepared, and the results of the measurement and analytical methods analyzed. A conclusion of the project is that the measurement and analytical methods both provided reasonable results. There are correlations between the measured and analytical results for most harmonics, although there are discrepancies between the assumptions used in the two methods. A sensitivity approach has been proposed to further correlate the results. From the results of the analysis, it is recommended that both methods should be tested further. For the measurement method, more testing should be done to cover different system operating conditions. In the analytical method, more detailed models for representing system components should be studied. In addition, alternative statistical and sensitivity approaches should be attempted.

  19. Speed Control of DC Motor using AC/AC/DC Converter Based on Intelligent Techniques

    Directory of Open Access Journals (Sweden)

    Rakan Kh Antar

    2013-05-01

    Full Text Available    This paper describes the application of ac/ac/dc and ac/dc converters to control the speed of a separately excited DC motor. Artificial neural network and PI controller are trained to select the desired values of firing angles for triggering thyristors of the ac/ac/dc and ac/dc bridge converters in order to control the speed of the dc motor at a desired value with constant and different load torques in order to obtain the best speed response. Simulation results show that the rising time for ac/dc and ac/ac/dc converters at 250rpm are reduced about 79% and 89% respectively, while delay time it reduced about 69% and 64% respectively. Therefore, speed response of the dc motor is more efficient for closed loop system compared with open loop also the response of ac/ac/dc converter is better than ac/dc converter.

  20. Case Studies and Codes of Ethics: The Relevance of the ACS Experience to ALIA

    Science.gov (United States)

    Ferguson, Stuart; Salmond, Rachel; Al-Saggaf, Yeslam; Bowern, Mike; Weckert, John

    2005-01-01

    This paper comments on a recent "Code of Ethics" project conducted on behalf of the Australian Computer Society, and proposes a similar project for the Australian Library and Information Association (ALIA). It reviews the scope and methodology of the project, which developed a comprehensive set of case studies and related them to the ACS "Code of…

  1. AcEST: DK943932 [AcEST

    Lifescience Database Archive (English)

    Full Text Available rella paten... 145 2e-33 tr|B6T2L2|B6T2L2_MAIZE Sedoheptulose-1,7-bisphosphatase ...EAL++SHVCK+AC Sbjct: 67 ATACVNTFGDEQLAVDMLADKLLFEALRHSHVCKYAC 103 >tr|B6T2L2|B6T2L2_MAIZE Sedoheptulose-1,7-

  2. AcEST: DK961189 [AcEST

    Lifescience Database Archive (English)

    Full Text Available OS=A... 127 7e-29 sp|Q94B08|GCP1_ARATH Germination-specific cysteine protease 1 OS... 125 2e-28 sp|P00785|AC...IRNSWGLNWGDSGYVKLQRNIDDPFGKCGIAMMPSYP 347 >sp|Q94B08|GCP1_ARATH Germination-specific cysteine protease 1 OS=

  3. SSTI Clark ACS Technology Demonstrations

    OpenAIRE

    Freesland, Douglas

    1997-01-01

    SSTI Clark, one of two spacecraft built under NASA's Small Satellite Technology Initiative, includes seven ACS technology demonstrations. The technologies redefine the performance cost envelope, providing improved sensor and actuator performance at reduced costs. Six sensing technologies are being flown consisting of both hardware and algorithmic demonstrations: autonomous star tracker, hemispherical resonating gyro, GPS attitude determination, miniature horizon sensors, low cost course sun s...

  4. Apuntes de Acústica

    OpenAIRE

    Martín Domingo, Agustín

    2014-01-01

    Esta publicacion contiene unos apuntes para la parte de Acústica de las asignaturas de la ETSAM, junto con cierta cantidad de material adicional que excede el ámbito del curso. Aunque está lejos de ser completa y de estar libre de errores, el autor espera sea útil.

  5. Energy saving in ac generators

    Science.gov (United States)

    Nola, F. J.

    1980-01-01

    Circuit cuts no-load losses, without sacrificing full-load power. Phase-contro circuit includes gate-controlled semiconductor switch that cuts off applied voltage for most of ac cycle if generator idling. Switch "on" time increases when generator is in operation.

  6. AcEST: DK943965 [AcEST

    Lifescience Database Archive (English)

    Full Text Available FKBP-type OS=Cya... 55 2e-06 tr|B8EIG1|B8EIG1_METSI Peptidylprolyl isomerase FKBP-type OS=Met... 53 9e-06 t... type OS=Ac... 51 4e-05 tr|B8I9L2|B8I9L2_METNO Peptidylprolyl isomerase FKBP-type OS=Met.

  7. Introducing high performance distributed logging service for ACS

    Science.gov (United States)

    Avarias, Jorge A.; López, Joao S.; Maureira, Cristián; Sommer, Heiko; Chiozzi, Gianluca

    2010-07-01

    The ALMA Common Software (ACS) is a software framework that provides the infrastructure for the Atacama Large Millimeter Array and other projects. ACS, based on CORBA, offers basic services and common design patterns for distributed software. Every properly built system needs to be able to log status and error information. Logging in a single computer scenario can be as easy as using fprintf statements. However, in a distributed system, it must provide a way to centralize all logging data in a single place without overloading the network nor complicating the applications. ACS provides a complete logging service infrastructure in which every log has an associated priority and timestamp, allowing filtering at different levels of the system (application, service and clients). Currently the ACS logging service uses an implementation of the CORBA Telecom Log Service in a customized way, using only a minimal subset of the features provided by the standard. The most relevant feature used by ACS is the ability to treat the logs as event data that gets distributed over the network in a publisher-subscriber paradigm. For this purpose the CORBA Notification Service, which is resource intensive, is used. On the other hand, the Data Distribution Service (DDS) provides an alternative standard for publisher-subscriber communication for real-time systems, offering better performance and featuring decentralized message processing. The current document describes how the new high performance logging service of ACS has been modeled and developed using DDS, replacing the Telecom Log Service. Benefits and drawbacks are analyzed. A benchmark is presented comparing the differences between the implementations.

  8. AC dynamometer; Koryu dinamo meter

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-10

    Fuji Electric Co., Ltd., developed an AC dynamometer for testing automobiles, and the product was delivered to Hokkaido Automotive Engineering College via Safety Automobile Company. The device is used for testing 1,300cc-class automobiles. It is similar to the conventional type in that its force of reaction to an imposed load is measured by load cells. It is a variable speed motor driven by an inverter (FRENIC5000VG5), whose specifications and features are mentioned below. It is a totally-enclosed self-cooled oscillating AC dynamometer that outputs 75kW, revolves at 1500/2868rpm, and operates for 30min. Since it is rated for a short time operation, the external fan is dispensed with, and this reduces noise. A number of parts for the standard type (R90 series) are utilized for reduction in the cost, and the time required for its delivery was short. (NEDO)

  9. Simultaneous distribution of AC and DC power

    Science.gov (United States)

    Polese, Luigi Gentile

    2015-09-15

    A system and method for the transport and distribution of both AC (alternating current) power and DC (direct current) power over wiring infrastructure normally used for distributing AC power only, for example, residential and/or commercial buildings' electrical wires is disclosed and taught. The system and method permits the combining of AC and DC power sources and the simultaneous distribution of the resulting power over the same wiring. At the utilization site a complementary device permits the separation of the DC power from the AC power and their reconstruction, for use in conventional AC-only and DC-only devices.

  10. Performance of AC/graphite capacitors at high weight ratios of AC/graphite

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hongyu [IM and T Ltd., Advanced Research Center, Saga University, 1341 Yoga-machi, Saga 840-0047 (Japan); Yoshio, Masaki [Advanced Research Center, Department of Applied Chemistry, Saga University, 1341 Yoga-machi, Saga 840-0047 (Japan)

    2008-03-01

    The effect of negative to positive electrode materials' weight ratio on the electrochemical performance of both activated carbon (AC)/AC and AC/graphite capacitors has been investigated, especially in the terms of capacity and cycle-ability. The limited capacity charge mode has been proposed to improve the cycle performance of AC/graphite capacitors at high weight ratios of AC/graphite. (author)

  11. DC System Control Strategy for 500 kV AC Line Automatic Reclosing in China-Russia Back to Back Project%中国—俄罗斯背靠背联网工程500 kV交流出线具有自动重合闸的直流控制策略

    Institute of Scientific and Technical Information of China (English)

    马为民; 曹燕明; 蒋维勇

    2013-01-01

    为提高中俄直流联网黑河换流站跨国联网工程运行的可靠性,提出了修改故障期间直流控制策略的方案,以使工程原设计方案中未设置的自动重合闸功能恢复使用.采用EMTDC仿真软件建立模型进行典型工况计算,并对重合闸期间产生的交流母线过电压、交流母线避雷器和阀避雷器的耐受能力进行了校核比较.仿真结果表明,新的控制策略应限制故障期间功率水平在300 MW(标幺值为0.4)以内.修改后的控制策略在黑河换流站实施后,通过兴福变至黑河变(兴黑线)故障后重合闸的实践检验,证明了策略的可行性和可靠性.所得出的直流控制策略对研究弱交流系统条件下换流站仅有1回交流出线时采用自动重合闸功能有重要指导意义.%To improve the operation reliability of Heihe converter station at China-Russia back to back(BTB) project,we proposed a modified DC system control strategy during line faults in order to recover the automatic reclosing function,which was not adopted in original design of the project.Models of the software EMTDC were used to simulate typical cases,through which the AC bus's over-voltage and the arrester energy of AC bus arrester and valve arrester during faults were compared and checked.The simulation results show that,from the new strategy,the power at the level of 300 MW (0.4 in per unit value) should be limited during a line fault.Feasibility and reliability of the modified control strategy have been proved by the successful reclosing in HeiHe station with the proposed strategy implemented under a failure on Xingfu Station to Heihe Station(Xinghei line) section.Thus the proposed DC control strategy is proven to be of great significance for studying the adopting automatic reclosing function in future converter station with only one AC line under weak AC system condition.

  12. AcEST: DK954735 [AcEST

    Lifescience Database Archive (English)

    Full Text Available AC ■■Homology search results ■■ - Swiss-Prot (release 56.9) Link to BlastX Result : Swiss-Prot sp_hit_id Q7TMD5 Definition sp|Q7TMD5...ng significant alignments: (bits) Value sp|Q7TMD5|ZC3HE_RAT Zinc finger CCCH domain-containing protein 1... ...tein pstB ... 30 5.8 sp|Q2S081|PSTB_SALRD Phosphate import ATP-binding protein pstB O... 30 7.6 >sp|Q7TMD5

  13. Effect of the magnetic material on AC losses in HTS conductors in AC magnetic field carrying AC transport current

    Science.gov (United States)

    Wan, Xing-Xing; Huang, Chen-Guang; Yong, Hua-Dong; Zhou, You-He

    2015-11-01

    This paper presents an investigation on the AC losses in several typical superconducting composite conductors using the H-formulation model. A single superconducting strip with ferromagnetic substrate or cores and a stack of coated conductors with ferromagnetic substrates are studied. We consider all the coated conductors carrying AC transport currents and simultaneously exposed to perpendicular AC magnetic fields. The influences of the amplitude, frequency, phase difference and ferromagnetic materials on the AC losses are investigated. The results show that the magnetization losses of single strip and stacked strips have similar characteristics. The ferromagnetic substrate can increase the magnetization loss at low magnetic field, and decrease the loss at high magnetic field. The ferromagnetic substrate can obviously increase the transport loss in stacked strips. The trends of total AC losses of single strip and stacked strips are similar when they are carrying current or exposed to a perpendicular magnetic field. The effect of the frequency on the total AC losses of single strip is related to the amplitude of magnetic field. The AC losses decrease with increasing frequency in low magnetic field region while increase in high magnetic field region. As the phase difference changes, there is a periodic variation for the AC losses. Moreover, when the strip is under only the transport current and magnetic field, the ferromagnetic cores will increase the AC losses for large transport current or field.

  14. Universality of ac conduction in disordered solids

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2000-01-01

    The striking similarity of ac conduction in quite different disordered solids is discussed in terms of experimental results, modeling, and computer simulations. After giving an overview of experiment, a macroscopic and a microscopic model are reviewed. For both models the normalized ac conductivity...... as a function of a suitably scaled frequency becomes independent of details of the disorder in the extreme disorder limit, i.e., when the local randomly varying mobilities cover many orders of magnitude. The two universal ac conductivities are similar, but not identical; both are examples of unusual non......-power-law universalities. It is argued that ac universality reflects an underlying percolation determining dc as well as ac conductivity in the extreme disorder limit. Three analytical approximations to the universal ac conductivities are presented and compared to computer simulations. Finally, model predictions...

  15. Universality of ac conduction in disordered solids

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2000-01-01

    non-power-law universalities. It is argued that ac universality reflects an underlying percolation determining dc as well as ac conductivity in the extreme disorder limit. Three analytical approximations to the universal ac conductivities are presented and compared to computer simulations. Finally......The striking similarity of ac conduction in quite different disordered solids is discussed in terms of experimental results, modeling, and computer simulations. After giving an overview of experiment, a macroscopic and a microscopic model are reviewed. For both models the normalized ac conductivity...... as a function of a suitably scaled frequency becomes independent of details of the disorder in the extreme disorder limit, i.e., when the local randomly varying mobilities cover many orders of magnitude. The two universal ac conductivities are similar, but not identical; both are examples of unusual...

  16. Blades and discs in gas turbines. Behaviour of material and components. Project department A-C. Final report; Schaufeln und Scheiben in Gasturbinen. Werkstoff- und Bauteilverhalten. Projektbereiche A bis C. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The special research area 339 `Blades and discs in gas turbines, behaviour of material and components` was carried on from 1988 to the end of 1196. This final report deals with the work in the years 1994, 1995 and 1996. In the project area A `Development of material` manufacturing processes both for metallic and ceramic high temperature materials were developed, tested and optimised. In the area of optimising casting structure, it was shown that the making grains finer up to the medium temperature range can be a suitable means for significantly raising the resistance to LCF loading with nearly unchanged heat and creep strength properties. Another main point was the characterisation and optimisation of sprayed ceramic layers on metallic substrates (heat insulating layers) and compound ceramic materials. In project area B `Material behaviour` the mechanisms were studied, which, particularly in metallic high temperature materials such as nickel-based superalloys, lead to failure of the material under thermo-mechanical stresses. In project area C `Component design`, on the one hand models for estimating service life for metallic high temperature materials under different thermo-mechanical stresses were developed. [Deutsch] Der Sonderforschungsbereich 339, `Schaufeln und Scheiben in Gasturbinen - Werkstoff- und Bauteilverhalten` wurde von 1988 bis Ende 1996 gefoerdert. Dieser Abschlussbericht behandelt die Arbeiten der Jahre 1994, 1995 und 1996. Im Projektbereich A `Werkstoffentwicklung` wurden Herstellungsverfahren sowohl fuer metallische als auch fuer keramische Hochtemperaturwerkstoffe entwickelt, erprobt und optimiert. Auf dem Gebiet der Gussgefuegeoptimierung konnte gezeigt werden, dass die Kornfeinung bis in den mittleren Temperaturbereich ein geeignetes Mittel sein kann, um den Widerstand gegen LCF-Belastung bei annaehernd unveraenderten Warm- und Kriechfestigkeitseigenschaften signifikant zu erhoehen. Einen weiteren Schwerpunkt bildete die Charakterisierung und

  17. ac electroosmosis in rectangular microchannels.

    Science.gov (United States)

    Campisi, Michele; Accoto, Dino; Dario, Paolo

    2005-11-22

    Motivated by the growing interest in ac electroosmosis as a reliable no moving parts strategy to control fluid motion in microfluidic devices for biomedical applications, such as lab-on-a-chip, we study transient and steady-state electrokinetic phenomena (electroosmosis and streaming currents) in infinitely extended rectangular charged microchannels. With the aid of Fourier series and Laplace transforms we provide a general formal solution of the problem, which is used to study the time-dependent response to sudden ac applied voltage differences in case of finite electric double layer. The Debye-Huckel approximation has been adopted to allow for an algebraic solution of the Poisson-Boltzmann problem in Fourier space. We obtain the expressions of flow velocity profiles, flow rates, streaming currents, as well as expressions of the complex hydraulic and electrokinetic conductances. We analyze in detail the dependence of the electrokinetic conductance on the extension of linear dimensions relative to the Debye length, with an eye on finite electric double layer effects. PMID:16351310

  18. Control of grid interactive AC microgrids

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Guerrero, Josep M.; Chen, Zhe

    2010-01-01

    and reliability, becomes an attractive candidate for the configuration of future electrical power system. This paper gives a brief review of grid interactive ac microgrid configurations. Control methods for power electronics interfaced DER units in grid interactive ac microgrids are discussed. In addition......, microgrid controls and power management strategies are presented. Future trends of microgrid are discussed pointing out how this concept can be a key to achieve a more intelligent and flexible AC grid....

  19. AcEST: DK959751 [AcEST

    Lifescience Database Archive (English)

    Full Text Available .. 86 1e-16 sp|A0FGR8|ESYT2_HUMAN Extended synaptotagmin-2 OS=Homo sapiens G... 72 3e-12 sp|Q6PFQ7|RASL2_MOU...SE Ras GTPase-activating protein 4 OS=Mus mus... 72 4e-12 sp|Q3TZZ7|ESYT2_MOUSE Extended...ivating-like protein 1 OS=Mus mu... 65 3e-10 sp|Q5M7N9|ESYT3_XENTR Extended synaptotagmin-3 OS=Xenopus tropi... 1 OS=Homo s... 61 6e-09 sp|Q8L7A4|AGD11_ARATH Probable ADP-ribosylation factor GTPase-ac... 61 6e-09 sp|Q7ZWU7|EST2B_XENLA Extended... synaptotagmin-2-B OS=Xenopus laev... 60 1e-08 sp|Q5FWL4|EST2A_XENLA Extended

  20. AcEST: BP920842 [AcEST

    Lifescience Database Archive (English)

    Full Text Available ta... 59 6e-09 sp|Q3TZZ7|ESYT2_MOUSE Extended synaptotagmin-2 OS=Mus musculus G... 59 7e-09 sp|Q9ZT47|PP16A_...CUCMA 16 kDa phloem protein 1 OS=Cucurbita maxim... 57 2e-08 sp|A0FGR8|ESYT2_HUMAN Extended synaptotagmin-2 ... domain-conta... 56 6e-08 sp|Q8L7A4|AGD11_ARATH Probable ADP-ribosylation factor GTPase-ac... 55 8e-08 sp|A0FGR9|ESYT3_HUMAN Extended... synaptotagmin-3 OS=Homo sapiens G... 55 1e-07 sp|Q5DTI8|ESYT3_MOUSE Extended synap...totagmin-3 OS=Mus musculus G... 54 2e-07 sp|Q5M7N9|ESYT3_XENTR Extended synaptota

  1. Short term dynamic aperture with AC dipoles

    CERN Document Server

    Mönig, Saskia; Persson, Tobias Hakan Bjorn; Coello De Portugal, Jaime; Langner, Andy; Tomas, Rogelio; CERN. Geneva. ATS Department

    2015-01-01

    The dynamic aperture of an accelerator is determined by its non-linear components and errors. Control of the dynamic aperture is important for a good understanding and operation of the accelerator. The AC dipole, installed in the LHC for the diagnostic of linear and non-linear optics, could serve as a tool for the determination of the dynamic aperture. However, since the AC dipole itself modifies the non-linear dynamics, the dynamic aperture with and without AC dipole are expected to differ. The effect of the AC dipole on the dynamic aperture is studied within this note.

  2. AC drive control system design in Guofeng 1 450 mm hot strip mill project%国丰1450热连轧交流传动系统设计

    Institute of Scientific and Technical Information of China (English)

    粟欣; 杨溪林; 刘朝锋; 李光威; 张栋

    2012-01-01

    唐山国丰钢铁有限公司1450热连轧2^#生产线主传动均采用交交变频控制方式,其主传动电动机均为大功率凸极交流同步电动机,采用全数字交交变频矢量控制的交流调速装置。每套交交变频装置由3台电网自然换流无环流可逆变流器、整流变压器、励磁主回路及矢量控制调速系统组成;控制回路采用Siemens的TDC和Simadyn D相结合的控制模式,既保证了控制系统的可靠性和快速性,同时也极大提高了系统扩展性,方便了与其他生产设备的连接。此外多个TDC组成的GDM网络也为全线重要控制系统软硬件的整合和统一管理提供了平台。系统投入使用以来,主传动控制系统故障率低、维护量小、运行平稳可靠,各项传动系统性能指标均达到设计目标,对同类配置主传动解决方案具有一定的指导借鉴意义。%In the project of Guofeng Iron & Steel Co., Ltd. 1 450 mm hot strip mill, a new cycloconverter system based on vector control is applied to the main drive controlling for each synchronous motor. Cycloconverter system consists of power units and control unit. The power units are composed of 3 thyristor converters for the 3 phases of the motor stator, transformer, the excitation circuit, and some other auxiliary devices. The control unit is constituted with Simadyn D (SD) and TDC digital controller. The integration of the TDC and SD improves the reliability, running speed and expansibility of the control system. In addition, the GDM bus supplied by TDC controllers for different functions, provides a unified software and hardware platform for different solutions and managements in the project. Since applied with this new integration as the control unit, the main drive systems have achieved all the designing goals and performed quite steady and reliable. Besides, the system' s trouble shooting time has greatly decreased. Due to the advantages of this new

  3. AC-tabsmodeller for superledende kabelledere

    DEFF Research Database (Denmark)

    Østergaard, Jacob; Holm (fratrådt), Jesper; Understrup (fratrådt), Henriette;

    1996-01-01

    I denne rapport opstilles tre modeller for beregning af AC-tab (vekselstrømstab) i superledende kabelledere. Beregning af tabenes størrelse er væsentlig i forbindelse med vurdering af superlederteknologiens anvendelighed til AC-applikationer. Viden om tabenes natur giver desuden et vigtigt...

  4. Efficient Lightweight AC-AC Power Control for Solar UAV Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A highly efficient and lightweight dual bridge matrix power controller development is proposed that will provide high performance to a solar powered high altitude...

  5. Advanced reliability improvement of AC-modules (ARIA)

    International Nuclear Information System (INIS)

    are fully or partially shaded. Alpha Real has conducted considerable testing of shading and temperature rises of up to 180C have been observed. Such a temperature rise will influence the lifetime and reliability of the module, and it is therefore common practice to protect modules from these conditions by using by-pass diodes. Having now an active element on the back of the module, such as a module integrated inverter, new possibilities are offered for new concepts for hot-spot prevention. The main conclusions of the ARIA project are: Both the AC module inverters, Sunmaster 130S and Edisun E230721G, withstood the electrical immunity tests successfully; The Sunmaster 130S passed the accelerated reliability tests with good results; The Edisun E230721G passed the temperature cycling test and a humidity-freezing test; The ANIT s.r.l. ARIA modules met all requirements of the CEI/IEC 61215 standard; The voltage comparison method is a most promising principle for hot spot detection. It is implemented into both the Solcolino E230721G and the Sunmaster 130S. The costs for a 200W module are about $1. to $2.5, where the costs for by-pass diodes are $4 to $15; Measurements at different locations in three countries have shown that the new Hot Spot Detector (HSD) by comparing the voltages operates. Computer simulations show that if the current through the shaded cell is less than or equal to the current generated by the shaded cell, the shaded cell will not become reverse biased. 10 refs

  6. Characterization of AcMNPV with a deletion of ac69 gene

    Directory of Open Access Journals (Sweden)

    Jianhao Ke

    2011-07-01

    Full Text Available ORF69 (Ac69 of Autographa californica multiple nucleopolyhedrovirus (AcMNPV is conserved in some baculovirus genomes. Although it has been shown that Ac69 has cap 0-dependent methyltransferase activity and is not required for budded virus production in Spodoptera frugiperda Sf-9 cells, its role in occlusion-derived virus synthesis and virus oral infectivity is not known. This paper describes generation of an ac69 knockout AcMNPV bacmid mutant and analyses of the influence of ac69 deletion on the viral infectivity in Sf-9 cells and Trichoplusia ni larvae so as to investigate the role of ac69 in the viral life cycle. Results indicated that ac69 deletion has little effect on the production rates and morphogenesis of budded virus and occlusion-derived virus in Sf-9 cells. In addition, animal experiment revealed that the deletion mutant did not affect AcMNPV infectivity for Trichoplusia ni larvae in LD50 and LT50 bioassay when administered orally. These results suggest that ac69 may be dispensable for viral infectivity both in vitro and in vivo.

  7. DC-Modulated PFC Buck-Type AC/AC Converter for Light Dimming

    Institute of Scientific and Technical Information of China (English)

    罗方林; 叶虹

    2007-01-01

    Dimmers are very widely applied in theatres, cinemas, dancing-parties, auditoriums and signal systems. They are usually supplied by single-stage AC/AC converters in the past with voltage regulation technique with the disadvantages of high total harmonic distortion, low power factor and poor power transfer efficiency. This paper introduces a novel method-DC-modulation that implements DC/DC conversion technology into AC/AC converters. The DC-modulated single-stage PFC AC/AC converters effectively improved the power factor up to 0.999 and the power transfer efficiency up to 97.8 %. The experimental results verified our design and calculation. This technique will be widely used in light dimming and other industrial applications.

  8. Cooperative Frequency Control for Autonomous AC Microgrids

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Quintero, Juan Carlos Vasquez; Guerrero, Josep M.;

    2015-01-01

    Distributed secondary control strategies have been recently studied for frequency regulation in droop-based AC Microgrids. Unlike centralized secondary control, the distributed one might fail to provide frequency synchronization and proportional active power sharing simultaneously, due to having...... not require measuring the system frequency as compared to the other presented methods. An ac Microgrid with four sources is used to verify the performance of the proposed control methodology....

  9. 马士基将重组AC-2和AC-3航线

    Institute of Scientific and Technical Information of China (English)

    燕翔(整理)

    2014-01-01

    马士基航运将重组其远东-墨西哥-中美洲-南美洲西海岸航线“AC-2”线和“AC-3”线。“AC-2”线将延伸至华北和韩国,同时不再挂靠华南,在亚洲,该航线将加挂青岛和釜山,

  10. A Simple Load Power Estimator For Quasi-Direct AC-AC Converter System

    OpenAIRE

    Marian GAICEANU; Emil ROSU

    2003-01-01

    In this paper a simple load power estimator for the three-phase quasi-direct acac converter system is reported. Since the ac-ac converter control by means of pulsewidth modulation (PWM) is based on the power balance concept, its load power should be known. Two control boards, based on the dSMC (digital Smart Motion Controller) 30 MIPS 32-bit fixed-point digital signal processor (DSP), were involved in the ac-ac system driving. By using the power balance control, the DC link voltage variation ...

  11. Ac loss characteristics of YBCO superconducting tapes fabricated by TFA-MOD technique

    International Nuclear Information System (INIS)

    We investigated the ac loss properties of a YBCO superconducting tape fabricated by TFA-MOD technique. The thickness of the YBCO layer is 1.2 μm. A 6-tape stack of 50 mm in length and 10 mm in width was inserted into a saddle-shaped pickup coil. The ac loss was measured at 35-77 K by applying an external ac magnetic field. The magnetic field angle was changed by rotating the sample stack around its longitudinal axis. The effective penetration field, which corresponds to the breaking point of an ac loss curve, decreased with increasing field angle though it was much smaller than that which was estimated for a superconducting slab with the same thickness as the width of a tape. As a result, the ac loss increased monotonically with an increasing field angle against the wide surface for any amplitude. The observed field angular dependence of the ac loss agreed with the theoretically predicted one by using the observed ac losses in perpendicular magnetic field. Anyway the ac loss for a larger amplitude than the effective penetration field was proportional to the critical current density and the projective width of a tape in the direction of the applied magnetic field for any field angle and any temperature as well known. In addition we estimated the magnetic field, B, dependence of the critical current, I c, from the observed magnetization curves. It was shown that zero-field I c appeared to be a linear function of temperature and I c-B characteristics was scaled with zero-field I c. We also discussed a difference in I c-B characteristics and its temperature dependence between TFA-MOD tapes and IBAD-PLD ones

  12. Ac loss characteristics of YBCO superconducting tapes fabricated by TFA-MOD technique

    Science.gov (United States)

    Iwakuma, Masataka; Nigo, Masahiro; Inoue, Daisuke; Miyamoto, Naoya; Kiss, Takanobu; Funaki, Kazuo; Iijima, Yasuhiro; Saitoh, Takashi; Izumi, Teruo; Yamada, Yutaka; Shiohara, Yuu

    2005-10-01

    We investigated the ac loss properties of a YBCO superconducting tape fabricated by TFA-MOD technique. The thickness of the YBCO layer is 1.2 μm. A 6-tape stack of 50 mm in length and 10 mm in width was inserted into a saddle-shaped pickup coil. The ac loss was measured at 35-77 K by applying an external ac magnetic field. The magnetic field angle was changed by rotating the sample stack around its longitudinal axis. The effective penetration field, which corresponds to the breaking point of an ac loss curve, decreased with increasing field angle though it was much smaller than that which was estimated for a superconducting slab with the same thickness as the width of a tape. As a result, the ac loss increased monotonically with an increasing field angle against the wide surface for any amplitude. The observed field angular dependence of the ac loss agreed with the theoretically predicted one by using the observed ac losses in perpendicular magnetic field. Anyway the ac loss for a larger amplitude than the effective penetration field was proportional to the critical current density and the projective width of a tape in the direction of the applied magnetic field for any field angle and any temperature as well known. In addition we estimated the magnetic field, B, dependence of the critical current, Ic, from the observed magnetization curves. It was shown that zero-field Ic appeared to be a linear function of temperature and Ic-B characteristics was scaled with zero-field Ic. We also discussed a difference in Ic-B characteristics and its temperature dependence between TFA-MOD tapes and IBAD-PLD ones.

  13. Engineering Design of the ITER AC/DC Power Supplies

    International Nuclear Information System (INIS)

    To design high power pulse power supplies, especially in huge power supplies have not designed till now, it is necessary to analyze a system's characteristics and relations with another systems as well as to know high voltage, high current control technologies. Contents of this project are; - Study for the engineering designs changed recently by ITER Organization(IO) and writing specifications for the power supplies to reduce project risk. - Detailed analysis of the AC/DC Converters and writing subtask reports on the Task Agreement. - Study for thyristor numbers, DCR's specifications for Korea-China sharing meetings. - Study for the grounding systems of the ITER power supply system. The results may used as one of reference for practical designs of the high power coil power supplies and also may used in various field such as electroplating, plasma arc furnaces, electric furnaces

  14. 21 CFR 886.1850 - AC-powered slitlamp biomicroscope.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered slitlamp biomicroscope. 886.1850... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1850 AC-powered slitlamp biomicroscope. (a) Identification. An AC-powered slitlamp biomicroscope is an AC-powered device that is...

  15. 21 CFR 886.4440 - AC-powered magnet.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered magnet. 886.4440 Section 886.4440 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4440 AC-powered magnet. (a) Identification. An AC-powered magnet is an AC-powered device that generates a magnetic field intended to find and...

  16. 21 CFR 888.1240 - AC-powered dynamometer.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered dynamometer. 888.1240 Section 888.1240...) MEDICAL DEVICES ORTHOPEDIC DEVICES Diagnostic Devices § 888.1240 AC-powered dynamometer. (a) Identification. An AC-powered dynamometer is an AC-powered device intended for medical purposes to...

  17. 21 CFR 886.1630 - AC-powered photostimulator.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered photostimulator. 886.1630 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1630 AC-powered photostimulator. (a) Identification. An AC-powered photostimulator is an AC-powered device intended to provide light stimulus...

  18. 78 FR 39345 - ACS Wireless, Inc.; Notice of Application

    Science.gov (United States)

    2013-07-01

    ... COMMISSION ACS Wireless, Inc.; Notice of Application AGENCY: Securities and Exchange Commission (``Commission...''). Summary of Application: ACS Wireless, Inc. (``ACS Wireless'') seeks an order under section 3(b)(2) of the..., owning, holding or trading in securities. ACS Wireless is primarily engaged in providing...

  19. AC Electrokinetics of Physiological Fluids for Biomedical Applications.

    Science.gov (United States)

    Lu, Yi; Liu, Tingting; Lamanda, Ariana C; Sin, Mandy L Y; Gau, Vincent; Liao, Joseph C; Wong, Pak Kin

    2015-12-01

    Alternating current (AC) electrokinetics is a collection of processes for manipulating bulk fluid mass and embedded objects with AC electric fields. The ability of AC electrokinetics to implement the major microfluidic operations, such as pumping, mixing, concentration, and separation, makes it possible to develop integrated systems for clinical diagnostics in nontraditional health care settings. The high conductivity of physiological fluids presents new challenges and opportunities for AC electrokinetics-based diagnostic systems. In this review, AC electrokinetic phenomena in conductive physiological fluids are described followed by a review of the basic microfluidic operations and the recent biomedical applications of AC electrokinetics. The future prospects of AC electrokinetics for clinical diagnostics are presented.

  20. 丛林上空的鬼影和利刺:续写炮艇神话的AC-119G/K

    Institute of Scientific and Technical Information of China (English)

    戴岭

    2004-01-01

    很多人都认为C-119飞行货车的炮艇机改型是是AC-47的继承人,第二代炮艇机。但实际上,AC-130A才是整个项目的第二步,导致这种误解的主要原因是,AC-119实际上比AC-130更早投入使用,是它接替了AC-47在越南战场上作战任务。实际上,在美国空军的正式项目编号里,AC-130研制项目被称为炮透过机-Ⅱ项目(Project Gunship Ⅱ),AC-119才是炮透过机-Ⅲ

  1. Analysis on Phase Arrangement and Transposition Modes for UHV DC and Double-circuit EHV AC Transmission Line Built on the Same Tower

    Institute of Scientific and Technical Information of China (English)

    SIMA Wenxia; ZHOU Yuan; YUAN Tao; YANG Qing; SUN Shujie; Gilles Tremouille

    2012-01-01

    For AC and DC hybrid transmission lines, the arrangement and transposition modes of AC conductors not only affect the unbalance factor of AC lines, but also influence the bias current of DC converter transformers by AC and DC coupling. Excessive bias current will influence the normal operation of converter transformers, thus the optimal AC phase arrangement and transposition mode of hybrid lines was studied to minimize the coupling effect between AC and DC lines to fit the requirements on both aspects. Based on the parameters of the Ximeng-Shanghai project in China, a detailed simulation model of the DC converter station and the hybrid transmission line with double- circuit AC 500 kV transmission lines and DC ± 800 kV transmission lines were presented in the software PSCAD- EMTDC, and the coupling effects of the hybrid transmission lines were elucidated. The fundamental frequency components of DC poles with different operation conditions, arrangements of conductors and operation modes were analyzed, and the effective arrangement and transposition limiting the fundamental frequency current component of the DC line were compared. Simulation results show that AC operating conditions can affect DC induced components while the DC system operation mode has no apparent effect. With compact arrangement and inconsistent transposition of AC lines, the fundamental frequency component on DC lines can be reduced effectively; the three transposed mode within the hybrid line is the optimal layout scheme, considering both the requirements of DC bias current and AC unbalance degree.

  2. Approaches to building single-stage AC/AC conversion switch-mode audio power amplifiers

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2004-01-01

    This paper discusses the possible topologies and promising approaches towards direct single-phase AC-AC conversion of the mains voltage for audio applications. When compared to standard Class-D switching audio power amplifiers with a separate power supply, it is expected that direct conversion...

  3. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift c

  4. Cost effective second generation AC-modules: Development and testing aspects

    International Nuclear Information System (INIS)

    In the framework of the European research project PV2GO, a new AC-module inverter was developed, taking into account all relevant aspects from a European market's point of view (standards, market, application, and research and development goals). The project goal was to achieve the overall system costs of 3 Euro per Wp for a modular plug-and-play photovoltaic system. For the photovoltaic-module, a standard 130-Wp Eurosolare module was chosen. The research and development (R and D) goal was to develop an advanced DC-control system consisting of a state-of-the-art programmable digital device and an Application Specific Integrated Circuit (ASIC) for the AC-control of the inverter. According to the topology concept, thermal and magnetic designs were optimized with regard to production technology and packaging for large-scale production. The new AC-modules were tested in a number of field-test sites in various parts of Europe and their reliability was assessed through Highly Accelerated Stress Tests. Efficiency and power quality have been tested in the laboratory. Further in the PV2GO project an optimization study of the manufacturing process of the new generation of AC-modules for high volume output was done. Another task was the pre-certification procedure to assure compliance with the European guidelines and standards

  5. Cyclotron and linac production of Ac-225.

    Science.gov (United States)

    Melville, Graeme; Allen, Barry J

    2009-04-01

    Radium needles that were once implanted into tumours as a cancer treatment are now obsolete and constitute a radioactive waste problem, as their half-life is 1600 years. The reduction of radium by photonuclear transmutation by bombarding Ra-226 with high-energy photons from a medical linear accelerator (linac) has been investigated. A linac dose of 2800 Gy produced about 2.4 MBq (64 microCi) of Ra-225, which decays to Ac-225 and can then be used for 'Targeted Alpha Therapy' (TAT) of cancer. This result, while consistent with theoretical calculations, is far too low to be of practical use unless much larger quantities of radium are irradiated. The increasing application of Ac-225 for cancer therapy indicates the potential need for its increased production and availability. This paper investigates the possibility of producing of Ac-225 in commercial quantities, which could potentially reduce obsolete radioactive material and displace the need for expensive importation of Ac-225 from the USA and Russia in the years ahead. Scaled up production of Ac-225 could theoretically be achieved by the use of a high current cyclotron or linac. Production specifications are determined for a linac in terms of current, pulse length and frequency, as well as an examination of other factors such as radiation issues and radionuclei separation. Yields are compared with those calculated for the Australian National Cyclotron in Sydney.

  6. AC/DC and DC/AC Converty Circuits in Power Supply Equipment%电源设备中AC/DC和DC/AC变换电路

    Institute of Scientific and Technical Information of China (English)

    杨碧石

    2001-01-01

    电源设备中根据电路变换功能来看,可分为四种类型:AC/DC、DC/AC、DC/DC、AC/AC,本文对AC/DC、DC/AC这两种变换的工作原理进行分析阐述并讨论每种电路的应用领域.

  7. ACS production: optimal design of solar thermal power plants; Produccion de ACS. Optimizacion del dimensionado de instalaciones de energia solar termica

    Energy Technology Data Exchange (ETDEWEB)

    Platon Arias, L.; San Jose Alonso, F.

    2009-07-01

    The aim of this project is to develop a program to size solar thermal power plants for the production of the company ACS, which enable optimum value calculations of the different influence parameters (surface, inclination, orientation, energy input) advising diverse circumstances and requirements. The energy input calculation has been effected according to f-chart method. For the solar radiation on inclined and oriented surfaces calculation, has been applied the Klein Method. (Author) 14 refs.

  8. Low AC Loss YBCO Coated Conductor Geometry by Direct Inkjet Printing

    Energy Technology Data Exchange (ETDEWEB)

    Rupich, Martin, Dr. [American Superconductor Corporation; Duckworth, Robert, Dr. [Oak Ridge National Laboratory

    2009-10-01

    The second generation (2G) high temperature superconductors (HTS) wire offers potential benefits for many electric power applications, including ones requiring filamentized conductors with low ac loss, such as transformers and fault current limiters. However, the use of 2G wire in these applications requires the development of both novel multi-filamentary conductor designs with lower ac losses and the development of advanced manufacturing technologies that enable the low-cost manufacturing of these filamentized architectures. This Phase I SBIR project focused on testing inkjet printing as a potential low-cost, roll-to-roll manufacturing technique to fabricate potential low ac loss filamentized architectures directly on the 2G template strips.

  9. Control of Power Converters in AC Microgrids

    DEFF Research Database (Denmark)

    Rocabert, Joan; Luna, Alvaro; Blaabjerg, Frede;

    2012-01-01

    The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability of the ele......The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability...

  10. The ACS Nearby Galaxy Survey Treasury

    CERN Document Server

    Dalcanton, Julianne J; Seth, Anil C; Dolphin, Andrew; Holtzman, Jon; Rosema, Keith; Skillman, Evan D; Cole, Andrew; Girardi, Leo; Gogarten, Stephanie M; Karachentsev, Igor D; Olsen, Knut; Weisz, Daniel; Christensen, Charlotte; Freeman, Ken; Gilbert, Karoline; Gallart, Carme; Harris, Jason; Hodge, Paul; de Jong, Roelof S; Karachentseva, Valentina; Mateo, Mario; Stetson, Peter B; Tavarez, Maritza; Zaritsky, Dennis; Governato, Fabio; Quinn, Thomas

    2009-01-01

    The ACS Nearby Galaxy Survey Treasury (ANGST) is a systematic survey to establish a legacy of uniform multi-color photometry of resolved stars for a volume-limited sample of nearby galaxies (D14 million stars. In this paper we present the details of the sample selection, imaging, data reduction, and the resulting photometric catalogs, along with an analysis of the photometric uncertainties (systematic and random), for both t he ACS and WFPC2 imaging. We also present uniformly derived relative distances measured from the apparent magnitude of the TRGB.

  11. The Effective AC Response of Nonlinear Composites

    Institute of Scientific and Technical Information of China (English)

    WEI En-Bo; GU Guo-Qing

    2001-01-01

    A perturbative approach is used to study the AC response of nonlinear composite media, which obey a current-field relation of the form J = σ E + χ|E|2 E with components having nonlinear response at finite frequencies. For a sinusoidal applied field, we extend the local potential in terms of sinusoidal components at fundamental frequency and high-order harmonic frequencies to treat the nonlinear composites. For nonlinear composite media vith a low concentrations of spherical inclusions, we give the formulae of the nonlinear effective AC susceptibility χ*3ω at the third harmonic frequency.

  12. Brazilian Angiostrongylus cantonensis haplotypes, ac8 and ac9, have two different biological and morphological profiles

    Directory of Open Access Journals (Sweden)

    Tainá CC Monte

    2014-12-01

    Full Text Available Angiostrongylus cantonensis is the etiologic agent of eosinophilic meningoencephalitis in humans. Cases have been recorded in many parts of the world, including Brazil. The aim of this study was to compare the differences in the biology and morphology of two different Brazilian haplotypes of A. : ac8 and ac9. A significantly larger number of L1 larvae eliminated in the faeces of rodents at the beginning of the patent period was observed for ac9 haplotype and compared to the total of L1 larvae eliminated, there was a significant difference between the two haplotypes. The ac9 haplotype showed a significant difference in the proportion of female and male specimens (0.6:1, but the same was not observed for ac8 (1.2:1. The morphometric analysis showed that male and female specimens isolated from ac8 haplotype were significantly larger with respect to body length, oesophagus length, spicule length (male and distance from the anus to the rear end (female compared to specimens from ac9. The morphological analysis by light microscopy showed little variation in the level of bifurcations at the lateral rays in the right lobe of the copulatory bursa between the two haplotypes. The biological, morphological and morphometric variations observed between the two haplotypes agree with the observed variation at the molecular level using the cytochrome oxidase subunit I marker and reinforce the possible influence of geographical isolation on the development of these haplotypes.

  13. SINGLE PHASE HIGH FREQUENCY AC CONVERTER FOR INDUCTION HEATING APPLICATION

    Directory of Open Access Journals (Sweden)

    M.A INAYATHULLAAH,

    2010-12-01

    Full Text Available The proposed topology reduces the total harmonic distortion (THD of a high frequency AC/AC Converter well below the acceptable limit. This paper deals with a novel single phase AC/DC/AC soft switching utility frequency AC to high frequency AC converter. In this paper a single phase full bridge inverter with Vienna rectifier as front end is used instead of conventional diode bridge rectifier to provide continuous sinusoidal input current with nearly unity power factor at the source side with extremely low distortion.. This power converter is more suitable and acceptable for cost effective high frequency (HF consumer induction heating applications.

  14. YBCO thin films in ac and dc films

    CERN Document Server

    Shahzada, S

    2001-01-01

    We report studies on the dc magnetization of YBCO thin films in simultaneously applied dc and ac fields. The effect of the ac fields is to decrease the irreversible magnetization drastically leading to complete collapse of the hysteresis loops for relatively small ac fields (250e). The magnitude of the decrease depends on the component of the ac field parallel to the c-axis. The decrease is non-linear with ac amplitude and is explained in the framework of the critical state response of ultra thin films in perpendicular geometry. The ac fields increase the relaxation rapidly at short times while the long time response appears unaffected. (author)

  15. AcsA-AcsB: The core of the cellulose synthase complex from Gluconacetobacter hansenii ATCC23769.

    Science.gov (United States)

    McManus, John B; Deng, Ying; Nagachar, Nivedita; Kao, Teh-hui; Tien, Ming

    2016-01-01

    The gram-negative bacterium, Gluconacetobacter hansenii, produces cellulose of exceptionally high crystallinity in comparison to the cellulose of higher plants. This bacterial cellulose is synthesized and extruded into the extracellular medium by the cellulose synthase complex (CSC). The catalytic component of this complex is encoded by the gene AcsAB. However, several other genes are known to encode proteins critical to cellulose synthesis and are likely components of the bacterial CSC. We have purified an active heterodimer AcsA-AcsB from G. hansenii ATCC23769 to homogeneity by two different methods. With the purified protein, we have determined how it is post-translationally processed, forming the active heterodimer AcsA-AcsB. Additionally, we have performed steady-state kinetic studies on the AcsA-AcsB complex. Finally through mutagenesis studies, we have explored the roles of the postulated CSC proteins AcsC, AcsD, and CcpAx.

  16. AcsA-AcsB: The core of the cellulose synthase complex from Gluconacetobacter hansenii ATCC23769.

    Science.gov (United States)

    McManus, John B; Deng, Ying; Nagachar, Nivedita; Kao, Teh-hui; Tien, Ming

    2016-01-01

    The gram-negative bacterium, Gluconacetobacter hansenii, produces cellulose of exceptionally high crystallinity in comparison to the cellulose of higher plants. This bacterial cellulose is synthesized and extruded into the extracellular medium by the cellulose synthase complex (CSC). The catalytic component of this complex is encoded by the gene AcsAB. However, several other genes are known to encode proteins critical to cellulose synthesis and are likely components of the bacterial CSC. We have purified an active heterodimer AcsA-AcsB from G. hansenii ATCC23769 to homogeneity by two different methods. With the purified protein, we have determined how it is post-translationally processed, forming the active heterodimer AcsA-AcsB. Additionally, we have performed steady-state kinetic studies on the AcsA-AcsB complex. Finally through mutagenesis studies, we have explored the roles of the postulated CSC proteins AcsC, AcsD, and CcpAx. PMID:26672449

  17. AC power generation from microbial fuel cells

    Science.gov (United States)

    Lobo, Fernanda Leite; Wang, Heming; Forrestal, Casey; Ren, Zhiyong Jason

    2015-11-01

    Microbial fuel cells (MFCs) directly convert biodegradable substrates to electricity and carry good potential for energy-positive wastewater treatment. However, the low and direct current (DC) output from MFC is not usable for general electronics except small sensors, yet commercial DC-AC converters or inverters used in solar systems cannot be directly applied to MFCs. This study presents a new DC-AC converter system for MFCs that can generate alternating voltage in any desired frequency. Results show that AC power can be easily achieved in three different frequencies tested (1, 10, 60 Hz), and no energy storage layer such as capacitors was needed. The DC-AC converter efficiency was higher than 95% when powered by either individual MFCs or simple MFC stacks. Total harmonic distortion (THD) was used to investigate the quality of the energy, and it showed that the energy could be directly usable for linear electronic loads. This study shows that through electrical conversion MFCs can be potentially used in household electronics for decentralized off-grid communities.

  18. A dry-cooled AC quantum voltmeter

    Science.gov (United States)

    Schubert, M.; Starkloff, M.; Peiselt, K.; Anders, S.; Knipper, R.; Lee, J.; Behr, R.; Palafox, L.; Böck, A. C.; Schaidhammer, L.; Fleischmann, P. M.; Meyer, H.-G.

    2016-10-01

    The paper describes a dry-cooled AC quantum voltmeter system operated up to kilohertz frequencies and 7 V rms. A 10 V programmable Josephson voltage standard (PJVS) array was installed on a pulse tube cooler (PTC) driven with a 4 kW air-cooled compressor. The operating margins at 70 GHz frequencies were investigated in detail and found to exceed 1 mA Shapiro step width. A key factor for the successful chip operation was the low on-chip power consumption of 65 mW in total. A thermal interface between PJVS chip and PTC cold stage was used to avoid a significant chip overheating. By installing the cryocooled PJVS array into an AC quantum voltmeter setup, several calibration measurements of dc standards and calibrator ac voltages up to 2 kHz frequencies were carried out to demonstrate the full functionality. The results are discussed and compared to systems with standard liquid helium cooling. For dc voltages, a direct comparison measurement between the dry-cooled AC quantum voltmeter and a liquid-helium based 10 V PJVS shows an agreement better than 1 part in 1010.

  19. Protection of AC and DC Microgrids

    DEFF Research Database (Denmark)

    Beheshtaein, Siavash; Savaghebi, Mehdi; Quintero, Juan Carlos Vasquez;

    2015-01-01

    In future, distributed energy resources (RESs) will be utilized at consumption points. As a consequence, power flow and fault current would be bidirectional and topologydependent; and hence the conventional protection strategies would be inefficient. This paper categorizes the main challenges in AC...

  20. AC loss in superconducting tapes and cables

    NARCIS (Netherlands)

    Oomen, Marijn Pieter

    2000-01-01

    The present study discusses the AC loss in high-temperature superconductors. Superconducting materials with a relatively high critical temperature were discovered in 1986. They are presently developed for use in large-scale power-engineering devices such as power-transmission cables, transformers an

  1. Thermal Simulation of AC Electromagnetic Contactor

    Institute of Scientific and Technical Information of China (English)

    NIUChun-ping; CHENDe-gui; ZHANGJing-shu; LIXing-wen

    2005-01-01

    Transient magnetic circuit method is adopted to calculate the power loss in winding and shading coil. Based on the analysis of heat transfer process in AC contactor, a thermal model is proposed and the temperature field distribution is simulated with 3-D FEM of ANSYS.Comparison of simulation results with measurements shows that the proposed method is effective.

  2. 76 FR 65633 - RIN 1904-AC43

    Science.gov (United States)

    2011-10-24

    ... 1904-AC43. Comments may be submitted using any of the following methods: Federal eRulemaking Portal... and avoid the use of special characters or any form of encryption. Postal Mail: Ms. Brenda Edwards, U... FR 56678 (September 14, 2011) to make available and invite comments on the framework document...

  3. AC Losses of Prototype HTS Transmission Cables

    Energy Technology Data Exchange (ETDEWEB)

    Demko, J.A.; Dresner, L.; Hughey, R.L.; Lue, J.W.; Olsen, S.K.; Sinha, U.; Tolbert, J.C.

    1998-09-13

    Since 1995 Southwire Company and Oak Ridge National Laboratory (ORNL) have jointly designed, built, and tested nine, l-m long, high temperature superconducting (HTS) transmission cable prototypes. This paper summarizes the AC loss measurements of five of the cables not reported elsewhere, and compares the losses with each other and with theory developed by Dresner. Losses were measured with both a calorimetric and an electrical technique. Because of the broad resistive transition of the HTS tapes, the cables can be operated stably beyond their critical currents. The AC losses were measured in this region as well as below critical currents. Dresner's theory takes into account the broad resistive transition of the HTS tapes and calculates the AC losses both below and above the critical current. The two sets of AC 10SS data agree with each other and with the theory quite welL In particular, at low currents of incomplete penetration, the loss data agree with the theoretical prediction of hysteresis loss based on only the outer two Iayers carrying the total current.

  4. Ac-dc converter firing error detection

    International Nuclear Information System (INIS)

    Each of the twelve Booster Main Magnet Power Supply modules consist of two three-phase, full-wave rectifier bridges in series to provide a 560 VDC maximum output. The harmonic contents of the twelve-pulse ac-dc converter output are multiples of the 60 Hz ac power input, with a predominant 720 Hz signal greater than 14 dB in magnitude above the closest harmonic components at maximum output. The 720 Hz harmonic is typically greater than 20 dB below the 500 VDC output signal under normal operation. Extracting specific harmonics from the rectifier output signal of a 6, 12, or 24 pulse ac-dc converter allows the detection of SCR firing angle errors or complete misfires. A bandpass filter provides the input signal to a frequency-to-voltage converter. Comparing the output of the frequency-to-voltage converter to a reference voltage level provides an indication of the magnitude of the harmonics in the ac-dc converter output signal

  5. A flux-coupled ac/dc magnetizing device.

    Science.gov (United States)

    Gopman, D B; Liu, H; Kent, A D

    2013-06-01

    We report on an instrument for applying ac and dc magnetic fields by capturing the flux from a rotating permanent magnet and projecting it between two adjustable pole pieces. This can be an alternative to standard electromagnets for experiments with small samples or in probe stations in which an applied magnetic field is needed locally, with advantages that include a compact form-factor, very low power requirements and dissipation as well as fast field sweep rates. This flux capture instrument (FLUXCAP) can produce fields from -400 to +400 mT, with field resolution less than 1 mT. It generates static magnetic fields as well as ramped fields, with ramping rates as high as 10 T/s. We demonstrate the use of this apparatus for studying the magnetotransport properties of spin-valve nanopillars, a nanoscale device that exhibits giant magnetoresistance. PMID:23822372

  6. FLUXCAP: A flux-coupled ac/dc magnetizing device

    CERN Document Server

    Gopman, Daniel B; Kent, Andrew D

    2012-01-01

    We report on an instrument for applying ac and dc magnetic fields by capturing the flux from a rotating permanent magnet and projecting it between two adjustable pole pieces. This can be an alternative to standard electromagnets for experiments with small samples or in probe stations in which an applied magnetic field is needed locally, with advantages that include a compact form-factor, very low power requirements and dissipation as well as fast field sweep rates. This flux capture instrument (FLUXCAP) can produce fields from -400 to +400 mT, with field resolution less than 1 mT. It generates static magnetic fields as well as ramped fields, with ramping rates as high as 10 T/s. We demonstrate the use of this apparatus for studying the magnetotransport properties of spin-valve nanopillars, a nanoscale device that exhibits giant magnetoresistance.

  7. Generic Electronic Board Design to Control 3-Phase Ac

    Directory of Open Access Journals (Sweden)

    RojasMolina A.

    2012-01-01

    Full Text Available This work presents the design and development of a low-cost power manager with controller for a 3-phase AC induction motor, with a wide range of industrial applications. The prototype drive design and development was made using the generic standard on printed board design IPC2221. Power manager consists of two stages. First is control stage, which includes an induction motor control-specific micro-controller. Second is power stage, with IGBTs as switching elements. This design is part of a wider project whose main objective is to advance a methodology to assist the quality improvement of academia-developed electronic prototypes. It is expected that these prototypes will be aligned with industrial standards, facilitating the industry-university connection regarding technological collaboration in the automation and control domain.

  8. A Comparison Between Two Average Modelling Techniques of AC-AC Power Converters

    Directory of Open Access Journals (Sweden)

    Pawel Szczesniak

    2015-03-01

    Full Text Available In this paper, a comparative evaluation of two modelling tools for switching AC-AC power converters is presented. Both of them are based on average modelling techniques. The first approach is based on the circuit averaging technique and consists in the topological manipulations, applied to a converters states. The second approach makes use of state-space averaged model of the converter and is based on analytical manipulations using the different state representations of a converter. The two modelling techniques are applied to a same AC-AC converter called matrix-reactance frequency converter based on buck-boost topology. These techniques are compared on the basis of their rapidity, quantity of calculations and transformations and its limitations.

  9. Implementation and Control of an AC/DC/AC Converter for Double Wound Flywheel Application

    Directory of Open Access Journals (Sweden)

    J. G. Oliveira

    2012-01-01

    Full Text Available An all-electric driveline based on a double wound flywheel, connected in series between main energy storage and a wheel motor, is presented. The flywheel works as a power buffer, allowing the battery to deliver optimized power. It also separates electrically the system in two sides, with the battery connected to the low voltage side and the wheel motor connected to the high voltage side. This paper presents the implementation and control of the AC/DC/AC converter, used to connect the flywheel high voltage windings to the wheel motor. The converter general operation and the adopted control strategy are discussed. The implementation of the AC/DC/AC converter has been described from a practical perspective. Results from experimental tests performed in the full-system prototype are presented. The prototype system is running with satisfactory stability during acceleration mode. Good efficiency and unity power factor could be achieved, based on vector control and space vector modulation.

  10. Digital model for harmonic interactions in AC/DC/AC systems

    Energy Technology Data Exchange (ETDEWEB)

    Guarini, A.P.; Rangel, R.D.; Pilotto, L.A.S.; Pinto, R.J.; Passos Junior, R. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)

    1994-12-31

    The main purpose of this paper is to present a model for calculation of HVdc converter harmonics taking into account the influence of the harmonic interactions between the ac systems in dc link transmissions. The ideas and methodologies used in the model development take into account the dc current ripple and ac voltage distortion in the ac systems. The theory of switching functions is applied to contemplate for the frequency conversions between the ac and dc sides, in an iterative process. It is possible then to obtain, even in balanced situations, non-characteristic harmonics that are produced by frequencies originated in the other terminal, which can be significant in a strongly coupled system, such as back-to-back configuration. (author) 9 refs., 3 figs.

  11. High voltage AC/AC electrochemical capacitor operating at low temperature in salt aqueous electrolyte

    Science.gov (United States)

    Abbas, Qamar; Béguin, François

    2016-06-01

    We demonstrate that an activated carbon (AC)-based electrochemical capacitor implementing aqueous lithium sulfate electrolyte in 7:3 vol:vol water/methanol mixture can operate down to -40 °C with good electrochemical performance. Three-electrode cell investigations show that the faradaic contributions related with hydrogen chemisorption in the negative AC electrode are thermodynamically unfavored at -40 °C, enabling the system to work as a typical electrical double-layer (EDL) capacitor. After prolonged floating of the AC/AC capacitor at 1.6 V and -40°C, the capacitance, equivalent series resistance and efficiency remain constant, demonstrating the absence of ageing related with side redox reactions at this temperature. Interestingly, when temperature is increased back to 24 °C, the redox behavior due to hydrogen storage reappears and the system behaves as a freshly prepared one.

  12. Design of Three Phase Matrix Converter AC-AC Utility Power Supply using SPWM Technique

    OpenAIRE

    Sagar.S.Pawar; Prakash.T.Patil

    2015-01-01

    This paper describes the control analysis and design of an three phase matrix AC-AC utility power supply .The SPWM modulation techniques is used to control the desired output voltage and gives the control output voltage and reduced input harmonic distortions .In this Matrix converter Input is directly connected to output no DC link components is required. Simulation had been done using mat lab simulink and Simulated results are observed

  13. Design of Three Phase Matrix Converter AC-AC Utility Power Supply using SPWM Technique

    Directory of Open Access Journals (Sweden)

    Sagar. S. Pawar

    2015-04-01

    Full Text Available This paper describes the control analysis and design of an three phase matrix AC-AC utility power supply .The SPWM modulation techniques is used to control the desired output voltage and gives the control output voltage and reduced input harmonic distortions .In this Matrix converter Input is directly connected to output no DC link components is required. Simulation had been done using mat lab simulink and Simulated results are observed

  14. AcEST Contig - AcEST | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...contig.zip File URL: ftp://ftp.biosciencedbc.jp/archive/acest/LATEST/acestcontig....zip File size: 1.34MB Simple search URL http://togodb.biosciencedbc.jp/togodb/view/archive_acestcontig#en Da...Joomla SEF URLs by Artio About This Database Database Description Download License Update History of This Database Site Policy | Contact Us AcEST Contig - AcEST | LSDB Archive ...

  15. A new class of hybrid AC/AC direct power converters

    OpenAIRE

    Klumpner, Christian; Wijekoon, Thiwanka; Wheeler, Patrick

    2005-01-01

    Variable voltage and variable frequency conversion of electrical energy from an AC source to an AC load is done in traditional power converters via a DC-link where an energy storage element (electrolytic capacitors) is situated. Despite its well-known benefits, it has the disadvantage of being bulky and to limit the converter lifetime. On the other hand, Direct Power Conversion (DPC) is an attractive concept, which doesn’t need an energy storage buffer, but has two main disadvantages: reduced...

  16. A Comparison Between Two Average Modelling Techniques of AC-AC Power Converters

    OpenAIRE

    Pawel Szczesniak

    2015-01-01

    In this paper, a comparative evaluation of two modelling tools for switching AC-AC power converters is presented. Both of them are based on average modelling techniques. The first approach is based on the circuit averaging technique and consists in the topological manipulations, applied to a converters states. The second approach makes use of state-space averaged model of the converter and is based on analytical manipulations using the different state representations of a converter. The two m...

  17. Approaches to building single-stage AC/AC conversion switch-mode audio power amplifiers

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, Michael A.E.

    2005-07-01

    This paper discusses the possible topologies and promising approaches towards direct single-phase AC-AC conversion of the mains voltage for audio applications. When compared to standard Class-D switching audio power amplifiers with a separate power supply, it is expected that direct conversion will provide better efficiency and higher level of integration, leading to lower component count, volume and cost, but at the expense of a minor performance deterioration. (au)

  18. AC losses in a HTS coil carrying DC current in AC external magnetic field

    International Nuclear Information System (INIS)

    We electrically measured AC losses in a Bi2223/Ag-sheathed pancake coil excited by a DC current in AC external magnetic field. Losses in the coil contain two kinds of loss components that are the magnetization losses and dynamic resistance losses. In the measurement, current leads to supply a current to the coil were specially arranged to suppress electromagnetic coupling between the coil current and the AC external magnetic field. A double pick-up coils method was used to suppress a large inductive voltage component contained in voltage signal for measuring the magnetization losses. It was observed that the magnetization losses were dependent on the coil current and that a peak of a curve of the loss factor vs. amplitude of the AC external magnetic field shifted to lower amplitude of the AC magnetic field as the coil current increased. This result suggests the full penetration magnetic field of the coil tape decreases as the coil current increases. The dynamic resistance losses were measured by measuring a DC voltage appearing between the coil terminals. It was observed that the DC voltage appearing in the coil subject to the AC external magnetic field was much larger than that in the coil subject to DC magnetic field

  19. Morphological studies of the galaxy populations in distant "Butcher-Oemler" clusters with HST. II. AC103, AC118 and AC114 at z=0.31

    CERN Document Server

    Couch, W J; Smail, I; Ellis, Richard S; Sharples, R M

    1997-01-01

    We present new results of a program to study the detailed morphologies of galaxies in intermediate redshift clusters and hence understand the physical origin of the enhanced star formation in these environments at earlier epochs. Deep, high resolution imagery has been obtained of 3 rich clusters, AC103,AC118 & AC114 at z=0.31, using the WFPC2 on HST. For AC103 & AC118, single pointings covering a central 0.5x0.5Mpc have been obtained; for AC114, 4 pointings covering a 1.2x0.7Mpc area have been obtained, allowing the more outer regions of a distant cluster to be studied. Hubble types plus evidence for dynamical interactions and/or structural abnormalities have been determined visually for all galaxies down to R=22.25 in AC103 & AC118 and R=23.0 in AC114.We find the numbers of spirals (Sa-Sdm) in our clusters to be up to 4x higher than that seen in present-day clusters; only in the virialised core of our most massive regular cluster, AC114, do we see morphological fractions approaching those of the ...

  20. 21 CFR 880.5500 - AC-powered patient lift.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered patient lift. 880.5500 Section 880.5500 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Devices § 880.5500 AC-powered patient lift. (a) Identification. An AC-powered lift is an...

  1. Methods for Addressing Missing Data with Applications from ACS Exams

    Science.gov (United States)

    Brandriet, Alexandra; Holme, Thomas

    2015-01-01

    As part of the ACS Examinations Institute (ACS-EI) national norming process, student performance data sets are collected from professors at colleges and universities from around the United States. Because the data sets are collected on a volunteer basis, the ACS-EI often receives data sets with only students' total scores and without the students'…

  2. 7 CFR 1737.31 - Area Coverage Survey (ACS).

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Area Coverage Survey (ACS). 1737.31 Section 1737.31... Studies-Area Coverage Survey and Loan Design § 1737.31 Area Coverage Survey (ACS). (a) The Area Coverage Survey (ACS) is a market forecast of service requirements of subscribers in a proposed service area....

  3. AC LED的研究现状与发展%Current research and development of AC LED

    Institute of Scientific and Technical Information of China (English)

    满瑞; 李秋俊

    2012-01-01

    介绍了AC LED的特征及其工作原理,分析了AC LED相比于DC LED的优缺点,概述了AC LED在国内外的研究进展及其应用现状,讨论了AC LED技术发展过程中面临的挑战,并展望了其发展趋势.%The characteristics and operation principles of AC LED were presented.The advantages and disadvantages of AC LED compared with the DC LED were analyzed.The development and the latest application of AC LED were described.The challenges of the competition with the traditional light source were discussed,as well as the development trend of AC LED.

  4. A novel power control strategy of Modular Multi-level Converter in HVDC-AC hybrid transmission systems for passive networks

    DEFF Research Database (Denmark)

    Hu, Zhenda; Wu, Rui; Yang, Xiaodong;

    2014-01-01

    With the development of High Voltage DC Transmission (HVDC) technology, there will be more and more HVDC-AC hybrid transmission system in the world. A basic challenge in HVDC-AC hybrid transmission systems is to optimize the power sharing between DC and AC lines, which become more severe when...... supplying power for passive networks, as the surplus power can only flow back to power grids through the AC lines. To deal with this issue, it demands not only accurate system capability design but also flexible power control strategy of power converters in VSC-HVDC. This paper proposes a novel power...... control strategy of Modular Multi-level Converter in VSC-HVDC, which can optimize converter output power according to passive network loading variation. Proposal method is studied with a case study of a VSC-HVDC AC hybrid project by PSCAD/EMTDC simulations....

  5. Use of Activated Carbon in Sediment Remediation : AC quantification techniques and remediation effects

    OpenAIRE

    2007-01-01

    Studies have demonstrated that hydrophobic organic compounds (HOC) show strong sorption to black carbon (BC). Therefore presence of BC in HOC contaminated sediment reduces the in situ freely dissolved aqueous concentration hence decrease uptake in biota. In connection with the research project “stability of polluted sediment” by the Norwegian Geotechnical Institute (NGI), sediment remediation with use of activated carbon (AC), which is a type of BC, is investigated. This thesis concentrates o...

  6. AC Stark cooling of C 2 - ion in penning trap using Simbuca

    CERN Document Server

    Cui, Hao

    2016-01-01

    This article is going to summarize work I did in my 2 month project on AC Stark cooling simulation, and the object is to help my colleague carry on it and make further progress. In this article, I will meanly explain the formula I used, the content and flowchart of my c++ code, some conclusion and knowledge we obtained about cooling efficiency from our simulation, and some important tips we noticed before.

  7. AC plasma anemometer—characteristics and design

    Science.gov (United States)

    Marshall, Curtis; Matlis, Eric; Corke, Thomas; Gogineni, Sivaram

    2015-08-01

    The characteristics and design of a high-bandwidth flow sensor that uses an AC glow discharge (plasma) as the sensing element is presented. The plasma forms in the air gap between two protruding low profile electrodes attached to a probe body. The output from the anemometer is an amplitude modulated version of the AC voltage input that contains information about the mean and fluctuating velocity components. The anemometer circuitry includes resistance and capacitance elements that simulate a dielectric-barrier to maintain a diffuse plasma, and a constant-current feedback control that maintains operation within the desired glow discharge regime over an extended range of air velocities. Mean velocity calibrations are demonstrated over a range from 0 to 140 m s-1. Over this velocity range, the mean output voltage varied linearly with air velocity, providing a constant static sensitivity. The effect of the electrode gap and input AC carrier frequency on the anemometer static sensitivity and dynamic response are investigated. Experiments are performed to compare measurements obtained with a plasma sensor operating at two AC carrier frequencies against that of a constant-temperature hot-wire. All three sensors were calibrated against the same known velocity reference. An uncertainty based on the standard deviation of the velocity calibration fit was applied to the mean and fluctuating velocity measurements of the three sensors. The motivation is not to replace hot-wires as a general measurement tool, but rather as an alternative to hot-wires in harsh environments or at high Mach numbers where they either have difficulty in surviving or lack the necessary frequency response.

  8. Entropy production in ac-calorimetry

    OpenAIRE

    Garden, Jean-Luc; Richard, Jacques

    2007-01-01

    In calorimetry and particularly in heat capacity measurements, different characteristic relaxation time constants may perturb the experiment which cannot be considered at thermodynamic equilibrium. In this case, thermodynamics of irreversible processes has to be taken into account and the calorimetric measurements must be considered as dynamic. In a temperature modulated experiment, such as ac-calorimetry, these non-equilibrium experiments give rise to the notion of frequency dependent comple...

  9. 78 FR 49318 - Availability of Draft Advisory Circular (AC) 90-106A and AC 20-167A

    Science.gov (United States)

    2013-08-13

    ... Systems (78 FR 34935-34958) (Docket No.: FAA-2013-0485; Notice No. 1209). AC 90-106A, Enhanced Flight... the Federal Register published on April 11, 2000 (65 FR 19477-19478), as well as at http://DocketsInfo... Federal Aviation Administration Availability of Draft Advisory Circular (AC) 90-106A and AC 20-...

  10. Dicty_cDB: FCL-AC08 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC08 (Link to dictyBase) - - - Contig-U15080-1 FCL-AC08P ...(Link to Original site) FCL-AC08F 616 FCL-AC08Z 291 FCL-AC08P 907 - - Show FCL-AC08 Library FCL (Link to library) Clone ID FCL-...-1 Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-AC08Q....Seq.d/ Representative seq. ID FCL-AC08P (Link to Original site) Representative DNA sequence >FCL-AC08 (FCL-AC08Q) /CSM/FCL/FCL-...ignificant alignments: (bits) Value FCL-AC08 (FCL-AC08Q) /CSM/FCL/FCL-AC/FCL-AC08Q.Seq.d/ 1322 0.0 SFA226 (S

  11. 单相直接AC-AC变换器的实现与分析%The Implementation and Analysis of Simple Phase Direct AC-AC Converter

    Institute of Scientific and Technical Information of China (English)

    万衡; 喻嬿; 黄道

    2002-01-01

    针对传统AC-DC-AC变换存在的缺陷,采用高频调制直接AC-AC变换技术,实现了两种不同结构的单相AC-AC直接变换器,对其特点和仿真结果进行了分析,并探讨了应用前景.

  12. Development of a hardware-based AC microgrid for AC stability assessment

    Science.gov (United States)

    Swanson, Robert R.

    As more power electronic-based devices enable the development of high-bandwidth AC microgrids, the topic of microgrid power distribution stability has become of increased interest. Recently, researchers have proposed a relatively straightforward method to assess the stability of AC systems based upon the time-constants of sources, the net bus capacitance, and the rate limits of sources. In this research, a focus has been to develop a hardware test system to evaluate AC system stability. As a first step, a time domain model of a two converter microgrid was established in which a three phase inverter acts as a power source and an active rectifier serves as an adjustable constant power AC load. The constant power load can be utilized to create rapid power flow transients to the generating system. As a second step, the inverter and active rectifier were designed using a Smart Power Module IGBT for switching and an embedded microcontroller as a processor for algorithm implementation. The inverter and active rectifier were designed to operate simultaneously using a synchronization signal to ensure each respective local controller operates in a common reference frame. Finally, the physical system was created and initial testing performed to validate the hardware functionality as a variable amplitude and variable frequency AC system.

  13. Molecular biology of maize Ac/Ds elements: an overview.

    Science.gov (United States)

    Lazarow, Katina; Doll, My-Linh; Kunze, Reinhard

    2013-01-01

    Maize Activator (Ac) is one of the prototype transposable elements of the hAT transposon superfamily, members of which were identified in plants, fungi, and animals. The autonomous Ac and nonautonomous Dissociation (Ds) elements are mobilized by the single transposase protein encoded by Ac. To date Ac/Ds transposons were shown to be functional in approximately 20 plant species and have become the most widely used transposable elements for gene tagging and functional genomics approaches in plants. In this chapter we review the biology, regulation, and transposition mechanism of Ac/Ds elements in maize and heterologous plants. We discuss the parameters that are known to influence the functionality and transposition efficiency of Ac/Ds transposons and need to be considered when designing Ac transposase expression constructs and Ds elements for application in heterologous plant species.

  14. CⅡEngineering Project Passed Completion Acceptance

    Institute of Scientific and Technical Information of China (English)

    LI; Zhen-yi; LI; Song; XUE; Sui-zhi; LI; Yan; CHENG; Ming

    2013-01-01

    CⅡengineering project involves the design and technical services of a reactor electric power supply system,which responds to the requirement of foreign client.The content of this project mainly covers three aspects including Class 1E Low Voltage AC System,Class 1E Low Voltage DC System,

  15. 隔离式SEPIC三电平AC-AC变换器的研究%Research of Isolated SEPIC Three-level AC - AC Converter

    Institute of Scientific and Technical Information of China (English)

    周振军; 李磊

    2011-01-01

    电力电子装置已在电力系统中得到了越来越广泛的应用,代表之一就是交流调压稳压装置.但是目前的交流调压稳压器多数采用AC-DC-AC的变换方式,这种调压稳压器不仅体积大、噪音大,而且开关管的电压应力大、输出电压波形质量低.提出了一种新型的隔离式交-交变换器,它是在sepic变换器(单端初级电感转换器)的基础上引入了推挽式变压器实现电气隔离.分析了工作原理,给出了控制策略,并通过仿真论证了变换器开关管电压应力小、输出电压波形质量高等特点.%Power electronics have been more widely used in power systems. One representative of power electronics is AC voltage regulator. But the AC - DC - AC conversion type is widely used for voltage regulator now. These AC voltage regulator not only have big bulk and high noise,but also with high power switch voltage stress and low quality of output waveform. To solve these problems)an isolated three-level AC - AC direct converter was proposed. It joined the push-pull transformer to achieve electrical isolation based on sepic AC -AC converter. Its operation principle and control strategies of the converter were investigated. By modeling and simulation,the performances of the AC - AC converter were verified, such as low switch voltage stress, high quality of output waveform and so on.

  16. Design and implementation of IEEE 802.11ac MAC controller in 65 nm CMOS process

    Science.gov (United States)

    Peng, Cheng; Bin, Wu; Yong, Hei

    2016-02-01

    An IEEE-802.11ac-1*1 wireless LAN system-on-a-chip (SoC) that integrates an analog front end, a digital base-band processor and a media access controller has been implemented in 65 nm CMOS technology. It can provide significantly increased throughput, high efficiency rate selection, and fully backward compatibility with the existing 802.11a/n WLAN protocols. Especially the measured maximum throughput of UDP traffic can be up to 267 Mbps. Project supported by the National Great Specific Project of China (No. 2012ZX03004004_001).

  17. Three-Level AC-DC-AC Z-Source Converter Using Reduced Passive Component Count

    DEFF Research Database (Denmark)

    Loh, Poh Chiang; Gao, Feng; Tan, Pee-Chin;

    2009-01-01

    This paper presents a three-level ac-dc-ac Z-source converter with output voltage buck-boost capability. The converter is implemented by connecting a low-cost front-end diode rectifier to a neutral-point-clamped inverter through a single X-shaped LC impedance network. The inverter is controlled......-second average at its output, while simultaneously achieving inductive voltage boosting by shooting through either an appropriately selected inverter phase-leg or two phase-legs being commanded simultaneously. More interestingly, these performance features are achieved with no increase in the number...

  18. Realization of a Direct Soft Switching AC/AC Converter for Wireless Power Transfer Applications

    OpenAIRE

    Vuorsalo, Simo

    2015-01-01

    This thesis describes the design, realization and testing of a three-phase to one-phase direct AC/AC converter, also known as the matrix converter. The switching is using the soft-switching strategy which is also known in the literature as the Zero Current Switching strategy. To achieve ZCS, the circuit needs resonant behavior which is achieved by the transmitter primary side that is an LC circuit. This circuit acts as a tank circuit and the switching frequency is the resonant frequency of th...

  19. Implementation of Low Frequency Ac to High Frequency Ac with Single Stage Zvs-Pwm Inverter

    Directory of Open Access Journals (Sweden)

    S. Arumugam S. Ramareddy M. Sridhar

    2011-12-01

    Full Text Available This paper presents a novel soft-switching pulse width modulation (PWM utility frequency AC to high frequency (HF AC power conversion circuit incorporating boost-active clamp single stage inverter topology. This power converter is more suitable and acceptable for cost effective HF consumer induction heating applications. Its operating principle is presented. The operating performances of this high frequency inverter using the latest insulated gate bipolar transistors are illustrated, which includes HFAC power regulation ranges and actual efficiency characteristics based on zero voltage soft switching operation ranges.. The simulation circuits are models are developed and they are simulated using ORCAD.

  20. Three-Level AC-DC-AC Z-Source Converter Using Reduced Passive Component Count

    DEFF Research Database (Denmark)

    Loh, Poh Chiang; Gao, Feng; Tan, Pee-Chin;

    2007-01-01

    This paper presents a three-level ac-dc-ac Z-source converter with output voltage buck-boost capability. The converter is implemented by connecting a low cost front-end diode rectifier to a neutral-point-clamped inverter through a single X-shaped LC impedance network. The inverter is controlled...... a low cost alternative to sensitive applications that need to ride-through frequent input voltage sags. For confirming the converter performance, experimental testing using a constructed laboratory prototype is performed with its captured results presented in a later section of the paper....

  1. MATHEMATICAL MODELING OF AC ELECTRIC POINT MOTOR

    Directory of Open Access Journals (Sweden)

    S. YU. Buryak

    2014-03-01

    Full Text Available Purpose. In order to ensure reliability, security, and the most important the continuity of the transportation process, it is necessary to develop, implement, and then improve the automated methods of diagnostic mechanisms, devices and rail transport systems. Only systems that operate in real time mode and transmit data on the instantaneous state of the control objects can timely detect any faults and thus provide additional time for their correction by railway employees. Turnouts are one of the most important and responsible components, and therefore require the development and implementation of such diagnostics system.Methodology. Achieving the goal of monitoring and control of railway automation objects in real time is possible only with the use of an automated process of the objects state diagnosing. For this we need to know the diagnostic features of a control object, which determine its state at any given time. The most rational way of remote diagnostics is the shape and current spectrum analysis that flows in the power circuits of railway automatics. Turnouts include electric motors, which are powered by electric circuits, and the shape of the current curve depends on both the condition of the electric motor, and the conditions of the turnout maintenance. Findings. For the research and analysis of AC electric point motor it was developed its mathematical model. The calculation of parameters and interdependencies between the main factors affecting the operation of the asynchronous machine was conducted. The results of the model operation in the form of time dependences of the waveform curves of current on the load on engine shaft were obtained. Originality. During simulation the model of AC electric point motor, which satisfies the conditions of adequacy was built. Practical value. On the basis of the constructed model we can study the AC motor in various mode of operation, record and analyze current curve, as a response to various changes

  2. Flexible AC transmission systems modelling and control

    CERN Document Server

    Zhang, Xiao-Ping; Pal, Bikash

    2012-01-01

    The extended and revised second edition of this successful monograph presents advanced modeling, analysis and control techniques of Flexible AC Transmission Systems (FACTS). The book covers comprehensively a range of power-system control problems: from steady-state voltage and power flow control, to voltage and reactive power control, to voltage stability control, to small signal stability control using FACTS controllers. In the six years since the first edition of the book has been published research on the FACTS has continued to flourish while renewable energy has developed into a mature and

  3. DC injection into low voltage AC networks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report summarises the results of a study investigating the impact of levels of injected DC current injections on a low voltage AC distribution network systems in order to recommend acceptable limits of DC from microgeneration. Relevant literature is reviewed, and the impact of DC levels in distribution transformers, transformer modelling, and instrumental transformers are discussed. The impact of DC in residual current devices (RCD) and in domestic electricity watt hour meters is examined along with DC enhanced corrosion, corrosion failure, and the measurement of DC current injection. Sources of DC injection outlined include DC from computer power supplies, network faults, geomagnetic phenomena, lighting circuits/dimmers, and embedded generators.

  4. An ac biased superconducting flux transformer

    International Nuclear Information System (INIS)

    The coupled motion of the vortex lattice of two electrically insulated, superimposed, superconducting thin films (primary and secondary) in a perpendicular magnetic field, is predicted to exhibit a Josephson-like behavior. For a dc applied current flowing in the primary film, the voltage difference between the time-averaged primary and secondary flux flow voltages obeys the equations of a resistively shunted junction model. If an ac current is superimposed on the dc current. Shapiro-type steps are predicted in the current-voltage characteristic. In contrast to the conventional Josephson effect, the voltage positions of these steps can be tuned by the applied magnetic field. (orig.)

  5. Mapa acústico parcial de Benetusser

    OpenAIRE

    MORILLA CASTELLANOS, EMILIO

    2012-01-01

    Se establece el mapa de ruido del municipio de Benetússer para evaluar y conocer su exposición al ruido ambiental y así poder dar cumplimiento a la Directiva Europea sobre Gestión y Evaluación de Ruido Ambiental (2002/49/CE) y a la Ley nacional 37/2003 del Ruido. Los mapas estratégicos de ruido nos aportan la información fundamental para diagnosticar la situación acústica y para la gestión del ruido ambiental.

  6. Simulation Environment for Power Management and Distribution Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall objective of this research project is to investigate an autonomous and online control structure for finite-inertia power systems (dc and ac) with a...

  7. POWER FACTOR IMPROVEMENT IN THREE PHASE AC-AC CONVERTER THROUGH MODIFIED SPWM

    Directory of Open Access Journals (Sweden)

    P.VASUKI,

    2011-02-01

    Full Text Available Recently, a new generation of ac-ac single-phase and three-phase power converters with more commutations per half cycle has been proposed for ac power due to the increasing availability and power capability of high frequency controlled-on and off power emiconductor switching devices. This paper presents three phase ac-acconverter whose control strategy is based on modified sinusoidal ulse-width modulation switching technique. As majority of the industrial loads are being inductive, the power factor is less. To improve the power factor, the delayed current is shifted to the input voltage, through a modification of the classical sinusoidal pulse width modulation switching technique. In this way, the decrease in the phase angle between the input current and voltage is feasible, and consequently, high cost compensation capacitors can be avoided. The improvement of power factor through this switching technique on the proposed converter is investigated and verified via simulation using the software Matlab/Simulink.

  8. Djungle power. A more remote AC bus

    Energy Technology Data Exchange (ETDEWEB)

    Boehnke, Heinz W. [Technosol, Jork (Germany)

    2010-07-01

    The Dzanga-Sangha Reserve in the Central African Republic is probably one of the world's most remote protected rainforest areas, much to the benefit of the rare species of lowland gorilla, forest elephant and local pygmy population Ba'Aka. The park is co-managed by the ''WWF-World Wide Fund for Nature'' with sponsoring from the German Regenwald-Stiftung. In 2008 wwf decided to switch from the old, failing generator supply to a solar hybrid mini-grid, along with stringent measures of energy conservation and management. After a careful energy audit Technosol designed an AC-bus system with a 22 kWp PV generator which should overcome the dependency on the old generators and their fuel demands. For 15 buildings, an entirely new distribution network was installed, state of the art energy saving devices introduced and an energy metering system deviced. The installation is operating since August 2009. In such remote locations, the reliability of the AC-bus over other generator-based solutions will be demonstrated and with the support of international organisations like the wwf the practical application of solar hybrid supply becomes a landmark of sustainable energy concepts. (orig.)

  9. Levantamiento del campo acústico de una fuente sonora subacuática en el tanque hidroacústico del Instituto de Acústica

    OpenAIRE

    Ranz Guerra, Carlos; Cobo, Pedro

    2000-01-01

    6 pp.-- PACS nrs.: 43.30.Jx, 43.30.Sf.-- Comunicación presentada en los siguientes congresos: Acústica 2000, II Congreso Iberoamericano de Acústica. XXXI Congreso Nacional de Acústica: TecniAcústica 2000. II Congreso Ibérico de Acústica. II Jornadas Iberoamericanas de Acústica. EAA Symposium on Architectural Acoustics.

  10. Dicty_cDB: FCL-AC03 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC03 (Link to dictyBase) - - - Contig-U16477-1 FCL-AC03P ...(Link to Original site) FCL-AC03F 538 FCL-AC03Z 570 FCL-AC03P 1108 - - Show FCL-AC03 Library FCL (Link to library) Clone ID FCL-...7-1 Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-AC03Q....Seq.d/ Representative seq. ID FCL-AC03P (Link to Original site) Representative DNA sequence >FCL-AC03 (FCL-AC03Q) /CSM/FCL/FCL-...AC/FCL-AC03Q.Seq.d/ AATTTTTAAAAAAAAAAGAAAATAAAAAAAAAAATAATATTTTATTAGTCATTATAAAAT TGTGAAT

  11. Dicty_cDB: FCL-AC20 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC20 (Link to dictyBase) - - - Contig-U15117-1 FCL-AC20Z ...(Link to Original site) - - FCL-AC20Z 600 - - - - Show FCL-AC20 Library FCL (Link to library) Clone ID FCL-A... http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-AC20Q.Seq.d/ Representative seq. ID FCL-...AC20Z (Link to Original site) Representative DNA sequence >FCL-AC20 (FCL-AC20Q) /CSM/FCL/FCL-AC/FCL-...Homology vs CSM-cDNA Score E Sequences producing significant alignments: (bits) Value FCL-AC20 (FCL-AC20Q) /CSM/FCL/FCL-AC/FCL-

  12. Project 2010 Project Management

    CERN Document Server

    Happy, Robert

    2010-01-01

    The ideal on-the-job reference guide for project managers who use Microsoft Project 2010. This must-have guide to using Microsoft Project 2010 is written from a real project manager's perspective and is packed with information you can use on the job. The book explores using Project 2010 during phases of project management, reveals best practices, and walks you through project flow from planning through tracking to closure. This valuable book follows the processes defined in the PMBOK Guide, Fourth Edition , and also provides exam prep for Microsoft's MCTS: Project 2010 certification.: Explains

  13. Autonomous Operation of Hybrid Microgrid With AC and DC Subgrids

    DEFF Research Database (Denmark)

    Chiang Loh, Poh; Li, Ding; Kang Chai, Yi;

    2013-01-01

    This paper investigates on power-sharing issues of an autonomous hybrid microgrid. Unlike existing microgrids which are purely ac, the hybrid microgrid studied here comprises dc and ac subgrids interconnected by power electronic interfaces. The main challenge here is to manage power flows among all...... sources distributed throughout the two types of subgrids, which is certainly tougher than previous efforts developed for only ac or dc microgrid. This wider scope of control has not yet been investigated, and would certainly rely on the coordinated operation of dc sources, ac sources, and interlinking...

  14. Estudio acústico del Conservatorio de Piles

    OpenAIRE

    VILLA MORANT, SARA

    2014-01-01

    El objetivo de este proyecto es realizar un estudio acústico general de la "Casa de la Cultura" de Piles, sobre todo de los recintos que más lo requieren, como la sala principal de música. El edificio, al tratarse de una construcción antigua, no reúne las especificaciones acústicas establecidas en el Código Técnico vigente en la actualidad. En primer lugar, se realiza el estudio del acondicionamiento acústico de la sala principal, entendiéndose como acondicionamiento acústico la definición de...

  15. Control of high-frequency AC link electronic transformer

    OpenAIRE

    Krishnaswami, H; Ramanarayanan, V.

    2005-01-01

    An isolated high-frequency link AC/AC converter is termed an electronic transformer.The electronic transformer has size and cost advantages over a conventional transformer because of high-frequency operation of the magnetic core. Of the various topologies of electronic transformer, the high-frequency AC link electronic transformer achieves high-frequency AC power transformation without a DC link. The circuit uses the standard H-bridge, one on either side of the high-frequency transformer. A n...

  16. AC electric motors control advanced design techniques and applications

    CERN Document Server

    Giri, Fouad

    2013-01-01

    The complexity of AC motor control lies in the multivariable and nonlinear nature of AC machine dynamics. Recent advancements in control theory now make it possible to deal with long-standing problems in AC motors control. This text expertly draws on these developments to apply a wide range of model-based control designmethods to a variety of AC motors. Contributions from over thirty top researchers explain how modern control design methods can be used to achieve tight speed regulation, optimal energetic efficiency, and operation reliability and safety, by considering online state var

  17. AC Own Motion Percentage of Randomly Sampled Cases

    Data.gov (United States)

    Social Security Administration — Longitudinal report detailing the numbers and percentages of Appeals Council (AC) own motion review actions taken on un-appealed favorable hearing level decisions...

  18. Engineering Design of the ITER AC/DC Power Supply System

    Energy Technology Data Exchange (ETDEWEB)

    Oh, B. H.; Lee, K. W.; Chang, D. S.; Jin, J. T.; Hwang, C. K.

    2010-02-15

    To design high power pulse power supplies, especially in huge power supplies have not designed till now, it is necessary to analyze a system's characteristics and relations with another systems as well as to know high voltage, high current control technologies. Contents of this project are; - Analysis of the changed designs of the AC/DC converters. - Setup of the PSIM model for the calculation of the junction temperature of the converter thyristors. - Finalize the converter's simulation modules and estimate the parallel number of an arm for each converter. - Fix the protection sequence and make a simulation. - Stability check of the power distribution system against the reactive power effect. - Design of small size hardware AC/DC converter. The results of these studies may used as one of references for practical designs of the power supplies and also used for developing Tokamak type fusion reactors in the future

  19. Comparative Study of DC and AC Microgrids in Commercial Buildings Across Different Climates and Operating Profiles: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Fregosi, D.; Ravula, S.; Brhlik, D.; Saussele, J.; Frank, S.; Bonnema, E.; Scheib, J.; Wilson, E.

    2015-04-22

    Bosch has developed and demonstrated a novel DC microgrid system designed to maximize utilization efficiency for locally generated photovoltaic energy while offering high reliability, safety, redundancy, and reduced cost compared to equivalent AC systems. Several demonstration projects validating the system feasibility and expected efficiency gains have been completed and additional ones are in progress. This work gives an overview of the Bosch DC microgrid system and presents key results from a large simulation study done to estimate the energy savings of the Bosch DC microgrid over conventional AC systems. The study examined the system performance in locations across the United States for several commercial building types and operating profiles and found that the Bosch DC microgrid uses generated PV energy 6%–8% more efficiently than traditional AC systems.

  20. [Intestinal occlusion and abdominal compartment syndrome (ACS)].

    Science.gov (United States)

    Stagnitti, Franco

    2009-01-01

    Intestinal occlusion is defined as an independent predictive factor of intra-abdominal hypertension (IAH) which represents an independent predictor of mortality. Baggot in 1951 classified patients operated with intestinal occlusion as being at risk for IAH ("abdominal blow-out"), recommending them for open abdomen surgery proposed by Ogilvie. Abdominal surgery provokes IAH in 44.7% of cases with mortality which, in emergency, triples with respect to elective surgery (21.9% vs 6.8%). In particular, IAH is present in 61.2% of ileus and bowel distension and is responsible for 52% of mortality (54.8% in cases with intra-abdominal infection). These patients present with an increasing intra-abdominal pressure (IAP) which, over 20-25 mmHg, triggers an Abdominal Compartment Syndrome (ACS) with altered functions in some organs arriving at Multiple Organ Dysfunction Syndrome (MODS). The intestine normally covers 58% of abdominal volume but when there is ileus distension, intestinal pneumatosis develops (third space) which can occupy up to 90% of the entire cavity. At this moment, Gastro Intestinal Failure (GIF) can appear, which is a specific independent risk factor of mortality, motor of "Organ Failure". The pathophysiological evolution has many factors in 45% of cases: intestinal pneumatosis is associated with mucosal and serous edema, capillary leakage with an increase in extra-cellular volume and peritoneal fluid collections (fourth space). The successive loss of the mucous barrier permits a bacterial translocation which includes bacteria, toxins, pro-inflammatory factors and oxygen free radicals facilitating the passage from an intra-abdominal to inter-systemic vicious cyrcle. IAH provokes the raising of the diaphragm, and vascular and visceral compressions which induce hypertension in the various spaces with compartmental characteristics. These trigger hypertension in the renal, hepatic, pelvic, thoracic, cardiac, intracranial, orbital and lower extremity areas, giving

  1. A Non-linear Controller for Single-Phase AC-AC Power Converter to meet UPS Performance Index

    Directory of Open Access Journals (Sweden)

    Abdelhafid Ait Elmahjoub

    2012-07-01

    Full Text Available This article focuses on AC-AC power converter that can be used for uninterruptible power supply (UPS. The converter is built on two stages: a AC-DC input stage and a DC-AC output stage. The two blocks are connected by an intermediate DC bus. The aim of control is threefold: i power factor correction ii regulation of DC bus iii generating a sinusoidal voltage at the output. The synthesis of controllers has been achieved through the technique of nonlinear backstepping control. A detailed analysis of the stability control system is presented. The performances of regulators have been validated by numerical simulation in MATLAB / SIMULINK.

  2. An ac bridge readout for bolometric detectors

    Science.gov (United States)

    Rieke, F. M.; Lange, A. E.; Beeman, J. W.; Haller, E. E.

    1989-01-01

    The authors have developed a bolometer readout circuit which greatly improves the low-frequency stability of bolometric detectors. The circuit uses an ac bias voltage and two matched bolometers and allows stable dc bolometer operation for integration times greater than 10 s. In astronomical applications the readout allows for qualitatively different observation modes (e.g. staring or slow-drift scanning) which are particularly well suited for space observations and for the use of arrays. In many applications the readout can increase sensitivity. The authors present noise spectra for 4He temperature bolometers with no excess noise at frequencies greater than 0.1 Hz. The measured optical responsivity of a bolometer operated with the present readout is the same as that of a bolometer operated with a conventional readout.

  3. Effective ac response in weakly nonlinear composites

    Energy Technology Data Exchange (ETDEWEB)

    Wei Enbo [Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071 (China); Yang Zidong [College of Power Engineering, University of Shanghai Science and Technology, Shanghai 200093 (China); Gu Guoqing [Information College of Science and Technology, East China Normal University, Shanghai 200062 (China)

    2004-01-07

    The perturbation method is developed to deal with the problem of determining the effective nonlinear conductivity of Kerr-like nonlinear media under an external ac electric field. As an example, we have considered the cylindrical inclusion embedded in a host under the sinusoidal external field E{sub 1} sin (<{omega}t) + E{sub 3} sin (3<{omega}t) with frequencies{omega} and 3{omega}. The potentials of composites at higher harmonics are derived in both local inclusion particle and host regions. The effective responses of bulk nonlinear composites at basic frequency and harmonics are given for cylindrical composites in the dilute limit. Moreover, the relationships between the nonlinear effective responses at the basic frequency and the third harmonics are derived.

  4. AC Dielectrophoresis Using Elliptic Electrode Geometry

    Directory of Open Access Journals (Sweden)

    S. M. Rezaul Hasan

    2011-01-01

    Full Text Available This paper presents negative AC dielectrophoretic investigations using elliptic electrode geometry. Simulations of the electric field gradient variation using various ratios of the semimajor and the semiminor axis were carried out to determine the optimum elliptic geometry for the dielectrophoretic electrokinetics of specimen in an assay with laminar (low Reynolds number fluid flow. Experimental setup of the elliptic electrode assembly using PCB fabrication and electrokinetic accumulation of specimen in a dielectrophoretic cage is also being reported. Using an actuating signal between 1 kHz and 1 MHz, successful trapping of 45 μm polystyrene beads suspended in distilled water was demonstrated due to negative dielectrophoresis near 100 kHz using the novel elliptic electrode.

  5. Josephson arrays for dc and ac metrology

    International Nuclear Information System (INIS)

    Large series arrays of underdamped SIS tunnel junctions are the basic element of the primary dc voltage standards used at present. The development of versatile quantum voltmeters for dc and ac metrology requires the preparation of large and perfect series arrays of overdamped Josephson junctions. Overdamped junctions can be realized by externally shunted SIS junctions or by internally shunted SNS or SINIS junctions. Arrays of up to 8000 SINIS junctions or 30000 SNS junctions were successfully operated at the 1 V dc level. In addition to being used in large arrays for voltage metrology and oscillators, the described junction types may become very useful for the preparation of highly integrated single-flux-quantum digital devices. (author)

  6. The AC and DC Conductivity of Nanocomposites

    Directory of Open Access Journals (Sweden)

    David S. McLachlan

    2007-01-01

    Full Text Available The microstructures of binary (conductor-insulator composites, containing nanoparticles, will usually have one of two basic structures. The first is the matrix structure where the nanoparticles (granules are embedded in and always coated by the matrix material and there are no particle-particle contacts. The AC and DC conductivity of this microstructure is usually described by the Maxwell-Wagner/Hashin-Shtrikman or Bricklayer model. The second is a percolation structure, which can be thought to be made up by randomly packing the two types of granules (not necessarily the same size together. In percolation systems, there exits a critical volume fraction below which the electrical properties are dominated by the insulating component and above which the conducting component dominates. Such percolation systems are best analyzed using the two-exponent phenomenological percolation equation (TEPPE. This paper discusses all of the above and addresses the problem of how to distinguish among the microstructures using electrical measurements.

  7. Low Cost Fabrication of 2G Wires for AC Applications

    Energy Technology Data Exchange (ETDEWEB)

    Kodenkandath, T.; List, F.A., III

    2005-09-15

    Ink-jet printing has been demonstrated as an adaptable technology for printing YBCO filaments using a Metal Organic (MO) YBCO precursor. The technology was demonstrated using AMSC's proprietary metal organic TFA-based YBCO precursor and a commercial piezoelectric print-head on RABiTS templates. Filaments with a width of 100 um and spacing of 200 um were successfully printed, decomposed and processed to YBCO. Critical currents of {approx} 200 A/cm-w were achieved in a series of filaments with a 2 mm width. The single nozzle laboratory printer used in the Phase 1 program is capable of printing {approx} 100 um wide single filaments at a rate of 8-10 cm/sec. The electrical stabilization of filaments with a Ag ink was also evaluated using ink-jet printing. The overall objective of the Phase 1 Project was the evaluation and demonstration of inkjet-printing for depositing YBCO filaments on textured templates (RABiTS, IBAD, ISD, etc. substrates) with properties appropriate for low loss ac conductors. Goals of the Phase 1 program included development of an appropriate precursor ink, demonstration of the printing process, processing and characterization of printed YBCO filaments and evaluation of the process for further development.

  8. Dicty_cDB: FCL-AC29 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC29 (Link to dictyBase) - - - Contig-U15392-1 FCL-AC29P ...(Link to Original site) FCL-AC29F 104 FCL-AC29Z 591 FCL-AC29P 695 - - Show FCL-AC29 Library FCL (Link to library) Clone ID FCL-...-1 Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-AC29Q....Seq.d/ Representative seq. ID FCL-AC29P (Link to Original site) Representative DNA sequence >FCL-AC29 (FCL-AC29Q) /CSM/FCL/FCL-...roducing significant alignments: (bits) Value VSC293 (VSC293Q) /CSM/VS/VSC2-D/VSC293Q.Seq.d/ 1063 0.0 FCL-AC29 (FCL-

  9. Wind-powered asynchronous AC/DC/AC converter system. [for electric power supply regulation

    Science.gov (United States)

    Reitan, D. K.

    1973-01-01

    Two asynchronous ac/dc/ac systems are modelled that utilize wind power to drive a variable or constant hertz alternator. The first system employs a high power 60-hertz inverter tie to the large backup supply of the power company to either supplement them from wind energy, storage, or from a combination of both at a preset desired current; rectifier and inverter are identical and operate in either mode depending on the silicon control rectifier firing angle. The second system employs the same rectification but from a 60-hertz alternator arrangement; it provides mainly dc output, some sinusoidal 60-hertz from the wind bus and some high harmonic content 60-hertz from an 800-watt inverter.

  10. Improved Design Methods for Robust Single- and Three-Phase ac-dc-ac Power Converters

    DEFF Research Database (Denmark)

    Qin, Zian

    . With the proposed new active power decoupling method, the ripple power in the converter can be compensated in a more efficient and more compact way. Then, Chapter 5 changes the scope of the thesis to three-phase converters, and the nine-switch converter, as a reduced switch version of two three-phase full......-bridges connected back-to-back, is studied. Application criteria of the nine-switch converter are investigated for reducing the relatively high stress introduced by the less number of switches. In Chapter 6 a rotating speed controller design method is proposed for improving the thermal loading of the three...... to users. Their performances including cost, efficiency, reliability, and so on, therefore are more important concerns than they were. The objective of this thesis is to study and propose advanced design methods for robust ac-dc-ac converters, which are widely used interfaces in energy conversion system...

  11. UHV A.C. transmission: Technology and prospects

    International Nuclear Information System (INIS)

    At the beginning of the 70's, UHV transmission was regarded as imminent in many countries in view of the expected concentration of generating units (possibly of the nuclear type and grouped together in a few large plants, each of several GW), and research projects were therefore launched in the U.S.A., Canada, Italy, Japan, USSR, etc. Nowadays, the expected introduction of UHV transmission seems remote due to the slowdown in electricity growth and to the tendency towards distributed generation. Nevertheless, there are exceptions: the 1,200 kV 2,400 km-long transmission system in operation in Siberia-Kazahkstan-Urals, and the 1,100 kV 200 km double-circuit line under construction in Japan (which will, however, be operated at 500 kV up to the end of the century). In addition, in Italy, the research programme of a 1000 kV project has now been completed and a 1,050 kV pilot plant is under construction in Tuscany, consisting of a short 1,050kV line and a 420/1,050 kV 1,200 MVA substation. The technology of UHV AC transmission has therefore been proved effective and may represent an available option for the power systems of the next century. From the power system planning point-of-view, UHV's favourable characteristics lie in the possibility of transmitting large amount of power, of the order of 5 GW per circuit, with lower costs, reduced losses, and less land occupation than in the case of EHV lines

  12. Scaling and universality of ac conduction in disordered solids

    DEFF Research Database (Denmark)

    Schrøder, Thomas; Dyre, Jeppe

    2000-01-01

    Recent scaling results for the ac conductivity of ionic glasses by Roling et al. [Phys. Rev. Lett. 78, 2160 (1997)] and Sidebottom [Phys. Rev. Lett. 82, 3653 (1999)] are discussed. We prove that Sidebottom's version of scaling is completely general. A new approximation to the universal ac...

  13. Operation of AC Adapters Visualized Using Light-Emitting Diodes

    Science.gov (United States)

    Regester, Jeffrey

    2016-01-01

    A bridge rectifier is a diamond-shaped configuration of diodes that serves to convert alternating current(AC) into direct current (DC). In our world of AC outlets and DC electronics, they are ubiquitous. Of course, most bridge rectifiers are built with regular diodes, not the light-emitting variety, because LEDs have a number of disadvantages. For…

  14. Equivalent circuit models for ac impedance data analysis

    Science.gov (United States)

    Danford, M. D.

    1990-01-01

    A least-squares fitting routine has been developed for the analysis of ac impedance data. It has been determined that the checking of the derived equations for a particular circuit with a commercially available electronics circuit program is essential. As a result of the investigation described, three equivalent circuit models were selected for use in the analysis of ac impedance data.

  15. Considerations for an Ac Dipole for the LHC

    CERN Document Server

    Bai, M; Fischer, W; Oddo, P; Schmickler, Hermann; Serrano, J; Jansson, A; Syphers, M; Kopp, S; Miyamoto, R

    2007-01-01

    Following successful experience at the BNL AGS, FNAL Tevatron, and CERN SPS, an AC Dipole will be adopted at the LHC for rapid measurements of ring optics. This paper describes some of the parameters of the AC dipole for the LHC, scaling from performance of the FNAL and BNL devices.

  16. Importance of Attenuation Correction (AC) for Small Animal PET Imaging

    DEFF Research Database (Denmark)

    El Ali, Henrik H.; Bodholdt, Rasmus Poul; Jørgensen, Jesper Tranekjær;

    2012-01-01

    concentration in the same organ with and without AC revealed an overall attenuation recovery of 9–21% for MAP reconstructed images, i.e., SUV without AC could underestimate the true activity at this level. For subcutaneous tumors, the attenuation was 13 ± 4% (9–17%), for kidneys 20 ± 1% (19...

  17. AC loss in large-scale superconducting cables

    NARCIS (Netherlands)

    Mulder, G.B.J.

    1993-01-01

    A review is given of recent work on ac losses, carried out at our institute. The emphasis is on large-scale conductors for fusion applications, such as the `cable-in-conduit¿ prototype conductors to be used for NET. Calculation methods for the ac losses are presented together with some experimental

  18. A Simple Load Power Estimator For Quasi-Direct AC-AC Converter System

    Directory of Open Access Journals (Sweden)

    Marian GAICEANU

    2003-12-01

    Full Text Available In this paper a simple load power estimator for the three-phase quasi-direct acac converter system is reported. Since the ac-ac converter control by means of pulsewidth modulation (PWM is based on the power balance concept, its load power should be known. Two control boards, based on the dSMC (digital Smart Motion Controller 30 MIPS 32-bit fixed-point digital signal processor (DSP, were involved in the ac-ac system driving. By using the power balance control, the DC link voltage variation at the load changes can be reduced. In this way a small DC link capacitor is required to handle the dc voltage error control. The feed-forward (Sul and Lipo, 1990 current component provides fast correction of the reference control to load power variation. In order to obtain the feed-forward current component, the load power must to be known. In this paper the load power is estimated from the dc link, indirectly, through a dc load current estimator. In this way the author overcomes the use of the serial communication between control boards (Gaiceanu, 2004 in order to deliver the load power information from the inverter side. The load current estimator is based on the DC link voltage and on the load current of the supply converter. This method presents certain advantages instead of using measured method, which requires a low pass filter: no time delay, the feed-forward current component has no ripple, no additional hardware, and more fast control response. Through simulation and experimental results the performances of the proposed load current estimator scheme are demonstrated.

  19. Sustainable AC/AC hybrid electrochemical capacitors in aqueous electrolyte approaching the performance of organic systems

    Science.gov (United States)

    Abbas, Qamar; Babuchowska, Paulina; Frąckowiak, Elżbieta; Béguin, François

    2016-09-01

    A high energy hybrid AC/AC electrochemical capacitor has been realized in aqueous Li2SO4+KI electrolyte mixture. Owing to the redox processes associated with the 2I-/I2 system, the positive electrode operates in narrow potential range and displays high capacity. During prolonged potentiostatic floating at 1.6 V, the hybrid cell demonstrates remarkably stable capacitance and resistance. Analyses by temperature programmed desorption after floating at 1.6 V proved that oxidation of the positive AC electrode is prevented by the use of Li2SO4+KI, which enables the maximum potential of this electrode to be shifted below the water oxidation potential. When charged at 0.2 A g-1 up to U = 1.6 V, the hybrid cell displays a high capacitance of 75 F g-1 (300 F g-1 per mass of one electrode) compared to 47 F g-1 (188 F g-1 per mass of one electrode) for a symmetric cell in Li2SO4. At 0.2 A g-1 up to 1.6 V, the hybrid capacitor in Li2SO4+KI displays an energy density of 26 Wh kg-1 which approaches the energy density of 30.9 Wh kg-1 measured when the same carbon is implemented in a capacitor using TEABF4/ACN electrolyte and charged up to 2.5 V.

  20. 单相电压型Z源AC/AC变流器电路%Single-Phase Voltage-Fed Z-Source AC/AC Converter

    Institute of Scientific and Technical Information of China (English)

    房绪鹏

    2006-01-01

    提出了一种新型AC/AC变流器电路--单相电压型Z源AC/AC变流器;介绍了其电路拓扑、工作原理、控制方法等;给出了相应的仿真和实验结果.仿真和实验证实了该电路拓扑的合理性和优越性.

  1. Ac response of a coupled double quantum dot

    Institute of Scientific and Technical Information of China (English)

    Xu Jie; W.Z. Shangguan; Zhan Shi-Chang

    2005-01-01

    The effect of phase-breaking process on the ac response of a coupled double quantum dot is studied in this paper based on the nonequilibrium Green function formalism. A general expression is derived for the ac current in the presence of electron-phonon interaction. The ac conductance is numerically computed and the results are compared with those in [Anatram M P and Datts S 1995 Phys. Rev. B 51 7632]. Our results reveal that the inter-dot electron tunnelling interplays with that between dots and electron reservoirs, and contributes prominently to the ac current when inter-dot tunnelling coupling is much larger than the tunnelling coupling between dots and electron reservoirs. In addition, the phase-breaking process is found to have a significant effect on the ac transport through the coupled double dot.

  2. Determination for β-delayed fission probability of 230Ac

    Institute of Scientific and Technical Information of China (English)

    袁双贵; 杨维凡; 徐岩冰; 肖永厚; 罗亦孝

    2002-01-01

    The 230Ra has been produced via 232Th-2p reaction induced by 60 MeV/u 18O ion irradia-tion of natural thorium. The radium was radiochemically separated from the mixture of thorium andreaction products. Thin Ra sources in which 230Ac was got through 230Ra β- → 230Ac were pre-pared for observing fission fragments from β-delayed fission of 230Ac. The sources were exposedto the mica fission track detectors and measured by the HPGe γ detector. The precursor 230Ac wasidentified by means of observed two fission events as well as γ spectra, and the β-delayed fissionprobability of 230Ac was obtained to be (1.19±0.85) × 10-8.

  3. Estimation of the Thurstonian model for the 2-AC protocol

    DEFF Research Database (Denmark)

    Christensen, Rune Haubo Bojesen; Lee, Hye-Seong; Brockhoff, Per B.

    2012-01-01

    The 2-AC protocol is a 2-AFC protocol with a “no-difference” option and is technically identical to the paired preference test with a “no-preference” option. The Thurstonian model for the 2-AC protocol is parameterized by δ and a decision parameter τ, the estimates of which can be obtained...... by fairly simple well-known methods. In this paper we describe how standard errors of the parameters can be obtained and how exact power computations can be performed. We also show how the Thurstonian model for the 2-AC protocol is closely related to a statistical model known as a cumulative probit model....... This relationship makes it possible to extract estimates and standard errors of δ and τ from general statistical software, and furthermore, it makes it possible to combine standard regression modelling with the Thurstonian model for the 2-AC protocol. A model for replicated 2-AC data is proposed using cumulative...

  4. An Ac transposon system based on maize chromosome 4S for isolating long-distance-transposed Ac tags in the maize genome.

    Science.gov (United States)

    Wang, Fei; Li, Zhaoying; Fan, Jun; Li, Pengfei; Hu, Wei; Wang, Gang; Xu, Zhengkai; Song, Rentao

    2010-12-01

    Transposon tagging is an important tool for gene isolation and functional studies. In maize, several transposon-tagging systems have been developed, mostly using Activator/Dissociation (Ac/Ds) and Mutator systems. Here, we establish another Ac-based transposon system with the donor Ac tightly linked with sugary1 (su1) on maize chromosome 4S. Newly transposed Ac (tr-Acs) were detected based on a negative dosage effect, and long-distance-transposed Ac events were identified and isolated from the donor Ac by a simple backcross scheme. In this study, we identified 208 independent long-distance-transposed Ac lines. Thirty-one flanking sequences of these tr-Acs were isolated and localized in the maize genome. As found in previous studies, the tr-Acs preferentially inserted into genic sequences. The distribution of tr-Acs is not random. In our study, the tr-Acs preferentially transposed into chromosomes 1, 2, 9 and 10. We discuss the preferential distribution of tr-Acs from Ac systems. Our system is complementary to two other Ac-based regional-mutagenesis systems in maize, and the combined use of these systems will achieve an even and high-density distribution of Ac elements throughout the maize genome for functional-genomics studies.

  5. 40 CFR 86.162-00 - Approval of alternative air conditioning test simulations and descriptions of AC1 and AC2.

    Science.gov (United States)

    2010-07-01

    ... Procedures § 86.162-00 Approval of alternative air conditioning test simulations and descriptions of AC1 and AC2. The alternative air conditioning test procedures AC1 and AC2 are approved by the Administrator... requirements of paragraph (a) of this section and meet the requirements of § 86.163-00. Air conditioning...

  6. Safe-commutation principle for direct single-phase AC-AC converters for use in audio power amplification

    DEFF Research Database (Denmark)

    Ljusev, Petar; Andersen, Michael Andreas E.

    2004-01-01

    This paper presents an alternative safe commutation principle for a single phase bidirectional bridge, for use in the new generation of direct single-stage AC-AC audio power amplifiers. As compared with the bridge commutation with load current or source voltage sensing, in this approach...

  7. La acústica submarina y su desarrollo desde la creación del Instituto de Acústica

    OpenAIRE

    Ranz Guerra, Carlos; Cobo, Pedro; Carbó, Rafael; Santiago Páez, José Salvador; Soler, A. M.; Briones, J. M.; Jimeno, I.; Muñoz, N; Camarasa, M.; Recuero López, Manuel

    2000-01-01

    PACS: 43.30.Xm; 43.30.Yj; 43.30.Vh; 43.30.Nb; 43.30.Ma.-- Publicado en el Vol. XXXI, núm. 3-4, tercer y cuarto trimestre 2000 de la Revista de Acústica: Número especial dedicado al XXV Aniversario del Instituto de Acústica del C.S.I.C.

  8. Metrological traceability for AC High-Voltage in Inmetro up to 40 kV

    Science.gov (United States)

    Vitorio, P. C. O.; de Lima, V. R.; Borges Filho, O.; de Souza, L. A. A.; Asencios, O. W. G.

    2016-07-01

    This paper refers to a project carried out in Inmetro aiming to provide internal metrological traceability for 60 Hz AC High-Voltage up to 40 kV. It presents details about the method used, its equations and obtained results. A capacitance and tanb bridge, with a built-in current comparator, was used in combination with two standard capacitors to calibrate a standard potential transformer (PT), both in ratio and phase angle. The results obtained by Inmetro showed good agreement with PTB ones, for the same PT. The maximum estimated uncertainty was 0,0049% for ratio error and 104 μrad for phase angle error.

  9. Investigation of the hydrogen release incident at the AC Transit Emeryville Facility.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Aaron P.; San Marchi, Christopher W.; Levin, Jamie; Butler, Dennis

    2012-06-01

    This report summarizes the investigation of the release of approximately 300kg of hydrogen at the AC Transit Facility in Emeryville, CA. The hydrogen release was avoidable in both the root cause and contributing factors. The report highlights the need for communication in all phases of project planning and implementation. Apart from the failed valve, the hydrogen system functioned as designed, venting the hydrogen gas a safe distance above surrounding structures and keeping the subsequent fire away from personnel and equipment. The Emeryville Fire Department responded appropriately given the information provided to the Incident Commander. No injuries or fatalities resulted from the incident.

  10. Importance of Attenuation Correction (AC for Small Animal PET Imaging

    Directory of Open Access Journals (Sweden)

    Henrik H. El Ali

    2012-10-01

    Full Text Available The purpose of this study was to investigate whether a correction for annihilation photon attenuation in small objects such as mice is necessary. The attenuation recovery for specific organs and subcutaneous tumors was investigated. A comparison between different attenuation correction methods was performed. Methods: Ten NMRI nude mice with subcutaneous implantation of human breast cancer cells (MCF-7 were scanned consecutively in small animal PET and CT scanners (MicroPETTM Focus 120 and ImTek’s MicroCATTM II. CT-based AC, PET-based AC and uniform AC methods were compared. Results: The activity concentration in the same organ with and without AC revealed an overall attenuation recovery of 9–21% for MAP reconstructed images, i.e., SUV without AC could underestimate the true activity at this level. For subcutaneous tumors, the attenuation was 13 ± 4% (9–17%, for kidneys 20 ± 1% (19–21%, and for bladder 18 ± 3% (15–21%. The FBP reconstructed images showed almost the same attenuation levels as the MAP reconstructed images for all organs. Conclusions: The annihilation photons are suffering attenuation even in small subjects. Both PET-based and CT-based are adequate as AC methods. The amplitude of the AC recovery could be overestimated using the uniform map. Therefore, application of a global attenuation factor on PET data might not be accurate for attenuation correction.

  11. Neurinoma central do nervo acústico

    Directory of Open Access Journals (Sweden)

    Paulo Pinto Pupo

    1950-03-01

    Full Text Available O autor apresenta o caso de uma paciente com 45 anos, com hipertensão arterial, queixando-se de tonturas e surdez progressiva à esquerda que, ao exame neurológico, apresentava síndrome protuberancial, com hemi-anestesia táctil e dolorosa à direita respeitando a face, hemiparesia direita, ataxia de tipo sensitivo nos membros da direita, paralisia facial de tipo periférico, hipoacusia, paresia de motor ocular externo à esquerda, síndrome vertiginosa e nistagmo horizontal ao olhar para a direita. À necrópsia foi encontrado um tumor na hemicalota protuberancial esquerda e foco malácico adjacente, secundário a distúrbio circulatório. O tumor, intimamente dependente das raízes intraprotuberanciais do nervo acústico, se apresentava com as características histológicas dos neurinomas. Além dessas particularidades, a lesão do feixe central da calota e conseqüente degeneração "hipertrófica" da oliva bulbar constituem outro aspecto de grande interêsse dêste caso.

  12. AC Impedance Behaviour of Black Diamond Films

    Institute of Scientific and Technical Information of China (English)

    Haitao YE; Olivier GAUDIN; Richard B.JACKMAN

    2005-01-01

    The first measurement of impedance on free-standing diamond films from 0.1 Hz to 10 MHz up to 300℃ were reported. A wide range of chemical vapour deposition (CVD) materials were investigated, but here we concentrate are well fitted to a RC parallel circuit model and the equivalent resistance and capacitance for the diamond films have been estimated using the Zview curve fitting. The results show only one single semicircle response at each temperature measured. It was found that the resistance decreases from 62 MΩ at room temperature to 4 kΩ at300℃, with an activation energy around 0.51 eV. The equivalent capacitance is maintained at the level of 100 pF up to 300℃ suggesting that the diamond grain boundaries are dominating the conduction. At 400℃, the impedance at low frequencies shows a linear tail, which can be explained that the AC polarization of diamond/Au interface occurs.

  13. Faint Galaxies in deep ACS observations

    CERN Document Server

    Benítez, N; Bouwens, R; Menanteau, F; Blakeslee, J P; Gronwall, C; Illingworth, G D; Meurer, G; Broadhurst, T J; Clampin, M; Franx, M; Hartig, G F; Magee, D; Sirianni, M; Ardila, D R; Bartko, F; Brown, R A; Burrows, C J; Cheng, E S; Cross, N J G; Feldman, P D; Golimowski, D A; Infante, L; Kimble, R A; Krist, J E; Lesser, M P; Levay, Z G; Martel, A R; Miley, G K; Postman, M; Rosati, P; Sparks, W B; Tran, H D; Tsvetanov, Z I; Zheng, R L

    2003-01-01

    We present the analysis of the faint galaxy population in the Advanced Camera for Surveys (ACS) Early Release Observation fields VV 29 (UGC 10214) and NGC 4676. Here we attempt to thoroughly consider all aspects relevant for faint galaxy counting and photometry, developing methods which are based on public software and that are easily reproducible by other astronomers. Using simulations we determine the best SExtractor parameters for the detection of faint galaxies in deep HST observations, paying special attention to the issue of deblending, which significantly affects the normalization and shape of the number count distribution. We confirm, as claimed by Bernstein, Freedman and Madore (2002), that Kron-like magnitudes, such as the ones generated by SExtractor, can miss more than half of the light of faint galaxies, what dramatically affects the slope of the number counts. We present catalogs for the VV 29 and NGC 4676 fields with photometry in the g,V and I bands. We also show that combining the bayesian so...

  14. Design of a DC-AC Link Converter for 500W Residential Wind Generator

    Directory of Open Access Journals (Sweden)

    Riza Muhida

    2012-12-01

    Full Text Available  As one of alternative sources of renewable energy, wind energy has an excellence prospect in Indonesia, particularly in coastal and hilly areas which have potential wind to generate electricity for residential uses. There is urgent need to locally develop low cost inverter of wind generator system for residential use. Recent developments in power electronic converters and embedded computing allow improvement of power electronic converter devices that enable integration of microcontrollers in its design. In this project, an inverter circuit with suitable control scheme design was developed. The circuit was to be used with a selected topology of Wind Energy Conversion System (WECS to convert electricity generated by a 500W direct-drive permanent magnet type wind generator which is typical for residential use. From single phase AC output of the generator, a rectifier circuit is designed to convert AC to DC voltage. Then a DC-DC boost converter is used to step up the voltage to a nominal DC voltage suitable for domestic use. The proposed inverter then will convert the DC voltage to sinusoidal AC. The duty cycle of sinusoidal Pulse-Width Modulated (SPWM signal controlling switches in the inverter was generated by a microcontroller. The lab-scale experimental rig involves simulation of wind generator by running a geared DC motor coupled with 500W wind generator where the prototype circuit was connected at the generator output. The experimental circuit produced single phase 240V sinusoidal AC voltage with frequency of 50Hz. Measured total harmonics distortion (THD of the voltage across load was 4.0% which is within the limit of 5% as recommended by IEEE Standard 519-1992.

  15. Analysis of Input and Output Ripples of PWM AC Choppers

    Directory of Open Access Journals (Sweden)

    Pekik Argo Dahono

    2008-11-01

    Full Text Available This paper presents an analysis of input and output ripples of PWM AC choppers. Expressions of input and output current and voltage ripples of single-phase PWM AC choppers are first derived. The derived expressions are then extended to three-phase PWM AC choppers. As input current and output voltage ripples specification alone cannot be used to determine the unique values of inductance and capacitance of the LC filters, an additional criterion based on the minimum reactive power is proposed. Experimental results are included in this paper to show the validity of the proposed analysis method.

  16. Advanced DC/AC inverters applications in renewable energy

    CERN Document Server

    Luo, Fang Lin

    2013-01-01

    DC/AC inversion technology is of vital importance for industrial applications, including electrical vehicles and renewable energy systems, which require a large number of inverters. In recent years, inversion technology has developed rapidly, with new topologies improving the power factor and increasing power efficiency. Proposing many novel approaches, Advanced DC/AC Inverters: Applications in Renewable Energy describes advanced DC/AC inverters that can be used for renewable energy systems. The book introduces more than 100 topologies of advanced inverters originally developed by the authors,

  17. DC and AC biasing of a transition edge sensor microcalorimeter

    International Nuclear Information System (INIS)

    We are developing AC-biased transition edge sensor (TES) microcalorimeters for use in large arrays with frequency-domain multiplexing. Using DC bias, we have achieved a resolution of 17 eV FWHM at 2.6 keV with a decay time of 90 μs and an effective detector diameter of 300 μm. We have successfully measured thermal pulses with a TES microcalorimeter operated with an AC bias. We present here preliminary results from a single pixel detector operated under DC and AC bias conditions

  18. Study on radioimmunoassay of Bt Cry1Ac protein

    International Nuclear Information System (INIS)

    Bt Cry1Ac protein was extracted from incubation of Bacillus thuringiensis HD-73, and cutting into more specific protein segment with high insect-resistance. High-affinity multi-colonial antibodies of Bt Cry1 Ac protein were obtained after injected it into New Zealand rabbits. By 125I labeling of Bt Cry1 Ac protein, a RIA kit was established. In this method, centrifuge for separation was not necessary due to the use of magnetic micro-particle and the specifications of the kit were found equal to those of imported ELISA. (authors)

  19. An Improved AC-BM Algorithm for Monitoring Watch List

    Directory of Open Access Journals (Sweden)

    Mo Yiwen

    2013-07-01

    Full Text Available With the expanding of database of the watch list of anti-money laundering, improving the speed in matching between the watch list and the database of account holders and clients’ transaction is especially important. This paper proposes an improved AC-BM Algorithm, a matching algorithm of subsection, to improve the speed of matching. Experiment results show the time performance of the improved algorithm is better than traditional BM algorithm, AC algorithm and the AC-BM algorithm. It can improve the efficiency of on-line monitoring of anti-money laundering.  

  20. Cyclotron production of Ac-225 for targeted alpha therapy.

    Science.gov (United States)

    Apostolidis, C; Molinet, R; McGinley, J; Abbas, K; Möllenbeck, J; Morgenstern, A

    2005-03-01

    The feasibility of producing Ac-225 by proton irradiation of Ra-226 in a cyclotron through the reaction Ra-226(p,2n)Ac-225 has been experimentally demonstrated for the first time. Proton energies were varied from 8.8 to 24.8 MeV and cross-sections were determined by radiochemical analysis of reaction yields. Maximum yields were reached at incident proton energies of 16.8 MeV. Radiochemical separation of Ac-225 from the irradiated target yielded a product suitable for targeted alpha therapy of cancer.

  1. Single-Phase Four Switch Z-Source AC-AC Converters%单相四开关Z源AC-AC变换器

    Institute of Scientific and Technical Information of China (English)

    汤雨; 谢少军; 张超华

    2007-01-01

    提出了一种单相四开关Z源AC-AC变换器,它包括电压型与电流型两类.与传统脉宽调制AC-AC变换器相比,它具有如下特点:输出电压范围宽且可升可降,输出电压与输入电压可同相或反相,冲击和谐波电流小,可靠性高.针对AC-AC变换器中固有的开关管换流问题,提出了一种适用于单相四开关Z源AC-AC变换器的换流方案,无需外加缓冲吸收电路即可实现开关管的安全换流.以电压型单相四开关Z源AC-AC变换器为例,对其进行了理论分析、仿真和原理试验研究.实验结果证实了Z源变换器的特性及换流方案的可行性.

  2. Dicty_cDB: FCL-AC22 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC22 (Link to dictyBase) - G03266 DDB0186811 Contig-U14995-1 FCL-...AC22P (Link to Original site) FCL-AC22F 430 FCL-AC22Z 521 FCL-AC22P 951 - - Show FCL-AC22 Library FC...L (Link to library) Clone ID FCL-AC22 (Link to dictyBase) Atlas ID - NBRP ID G03266 dictyBase ID DDB0186811 ...Link to Contig Contig-U14995-1 Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-...AC22Q.Seq.d/ Representative seq. ID FCL-AC22P (Link to Original site) Representative DNA sequence >FCL-

  3. Dicty_cDB: FCL-AC23 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FCL (Link to library) FCL-AC23 (Link to dictyBase) - G01760 DDB0186002 Contig-U16043-1 FCL-...AC23P (Link to Original site) FCL-AC23F 132 FCL-AC23Z 582 FCL-AC23P 714 - - Show FCL-AC23 Library FC...L (Link to library) Clone ID FCL-AC23 (Link to dictyBase) Atlas ID - NBRP ID G01760 dictyBase ID DDB0186002 ...Link to Contig Contig-U16043-1 Original site URL http://dictycdb.biol.tsukuba.ac.jp/CSM/FCL/FCL-AC/FCL-...AC23Q.Seq.d/ Representative seq. ID FCL-AC23P (Link to Original site) Representative DNA sequence >FCL-

  4. PROSPECTS OF MULTIFILAMENTARY SUPERCONDUCTOR AC 50 Hz APPLICATIONS

    OpenAIRE

    Hlásnik, I.

    1984-01-01

    It is shown that parameters of modern multifilamentary superconductors and their possible improvements allow their application to AC 50 Hz windings working at Bm of about 1 T and giving energy and total cost savings.

  5. Dc to ac converter operates efficiently at low input voltages

    Science.gov (United States)

    1965-01-01

    Self-oscillating dc to ac converter with transistor switching to produce a square wave output is used for low and high voltage power sources. The converter has a high efficiency throughout a wide range of loads.

  6. American Community Survey (ACS) 5-Year Estimates for Coastal Geographies

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The American Community Survey (ACS) is an ongoing statistical survey that samples a small percentage of the population every year. These data have been apportioned...

  7. AC susceptibility of polycrystalline (Bi-Pb 2223 superconductors

    Directory of Open Access Journals (Sweden)

    H. Salamati

    2004-06-01

    Full Text Available   The temperature dependence of ac susceptibility of (Bi-Pb2223 polycrystalline samples was measured as a function of frequency and ac field amplitude. Analysis of the temperature dependence of the AC susceptibility near the transition temperature (Tc has been done employing Bean’s critical state model. The observed variation of intergranular critical current densities (Jc with temperature indicates that the weak links are superconductor- normal metal-superconductor (SNS type for this sample. The frequency effect on AC susceptibility was also measured. As the frequency increases, (TP shifts to higher temperatures. This effect can be interpreted in terms of flux creep. The temperature T, and field, , dependence of activation energy obtained from the Arrhenius plot for the frequency ( f and ( TP , can be described as: U(Hac,T=U0(1-T/TCHac-0.18

  8. A precursor of β-delayed fission:230Ac

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The 230Ra has been produced via multinucleon transfer and dissipativefragmentation of heavy target in the 60 MeV/u 18O ion reaction with natural thorium.The radium was radiochemically separated from irradiated thorium targets. 230Acwas obtained by 230Ra β-→ 230Ac. Thin Ra sources were prepared for observing fissionfragments from β-delayed fission of 230Ac. The sources were exposed to the micafission track detectors and measured by a HPGe γ detector. The two fission eventswere obtained and could been assigned to theβ-delayed fission of 230Ac. The β-delayedfission probability of 230Ac was determined to be (1.19+0.85) × 10-8.

  9. A Switched Capacitor Based AC/DC Resonant Converter for High Frequency AC Power Generation

    Directory of Open Access Journals (Sweden)

    Cuidong Xu

    2015-09-01

    Full Text Available A switched capacitor based AC-DC resonant power converter is proposed for high frequency power generation output conversion. This converter is suitable for small scale, high frequency wind power generation. It has a high conversion ratio to provide a step down from high voltage to low voltage for easy use. The voltage conversion ratio of conventional switched capacitor power converters is fixed to n, 1/n or −1/n (n is the switched capacitor cell. In this paper, A circuit which can provide n, 1/n and 2n/m of the voltage conversion ratio is presented (n is stepping up the switched capacitor cell, m is stepping down the switching capacitor cell. The conversion ratio can be changed greatly by using only two switches. A resonant tank is used to assist in zero current switching, and hence the current spike, which usually exists in a classical switching switched capacitor converter, can be eliminated. Both easy operation and efficiency are possible. Principles of operation, computer simulations and experimental results of the proposed circuit are presented. General analysis and design methods are given. The experimental result verifies the theoretical analysis of high frequency AC power generation.

  10. Simulation of the Relaxation Potential Profile of an ac-dc-ac Test

    Directory of Open Access Journals (Sweden)

    Kerry N. Allahar

    2014-01-01

    Full Text Available The relaxation period of the accelerated ac-dc-ac test for coatings is associated with the transient electrochemistry that occurs when the immersed coated system is allowed to return to a stable open-circuit condition after being subjected to a cathodic potential. A mathematical model of the transient electrochemistry that occurs during this relaxation period is presented for coated aluminum. Expressions for the corrosion potential and corrosion current as functions of the local pH at the metal-coating interface were developed using reported experimental results. These expressions enabled the simulation of the transient electrochemistry under the constraint of balanced anodic and cathodic current densities. Regression of the transient relaxation potential profiles to exponential decay functions provided time-constant characterization of the profiles. Simulated results are presented that demonstrate the influences of the coating's porosity and thickness, the applied dc potential and the metal-coating interface condition on the time-constants associated with the relaxation profile. Interpretation of experimentally reported relaxation potential profiles supported the analysis of the simulated results.

  11. Muc5ac mucin expression during rat skin development

    OpenAIRE

    V. Ferretti; Á. Segal-Eiras; Barbeito, C.G.; Croce, M. V.

    2015-01-01

    Some mucin genes have been detected during human embryonic and fetal organ development; however, little is known about mucin expression in epidermal development, neither in humans nor in other species. The present research was developed to explore Muc5ac skin expression during prenatal and postnatal rat development. Immunohistochemistry (IHC), Western blotting (WB) and RT-PCR were employed. By IHC, Muc5ac protein was found early in embryonic epidermis from day 13 of gestation until seven days...

  12. Dynamics of a nanowire superlattice in an ac electric field

    OpenAIRE

    Zhang, Aizhen; Voon, L. C. Lew Yan; M. Willatzen

    2005-01-01

    With a one-band envelope function theory, we investigate the dynamics of a finite nanowire superlattice driven by an ac electric field by solving numerically the time-dependent Schroedinger equation. We find that for an ac electric field resonant with two energy levels located in two different minibands, the coherent dynamics in nanowire superlattices is much more complex as compared to the standard two-level description. Depending on the energy levels involved in the transitions, the coheren...

  13. Theory of the ac spin-valve effect

    OpenAIRE

    Kochan, Denis; Gmitra, Martin; Fabian, Jaroslav

    2011-01-01

    The spin-valve complex magnetoimpedance of symmetric ferromagnet/normal metal/ferromagnet junctions is investigated within the drift-diffusion (standard) model of spin injection. The ac magnetoresistance---the real part difference of the impedances of the parallel and antiparallel magnetization configurations---exhibits an overall damped oscillatory behavior, as an interplay of the diffusion and spin relaxation times. In wide junctions the ac magnetoresistance oscillates between positive and ...

  14. Fractal AC circuits and propagating waves on fractals

    CERN Document Server

    Akkermans, Eric; Dunne, Gerald; Rogers, Luke G; Teplyaev, Alexander

    2015-01-01

    We extend Feynman's analysis of the infinite ladder AC circuit to fractal AC circuits. We show that the characteristic impedances can have positive real part even though all the individual impedances inside the circuit are purely imaginary. This provides a physical setting for analyzing wave propagation of signals on fractals, by analogy with the Telegrapher's Equation, and generalizes the real resistance metric on a fractal, which provides a measure of distance on a fractal, to complex impedances.

  15. AC resistivity of d-wave ceramic superconductors

    OpenAIRE

    Li, Mai Suan; Dominguez, Daniel

    2000-01-01

    We model d-wave ceramic superconductors with a three-dimensional lattice of randomly distributed $\\pi$ Josephson junctions with finite self-inductance. The linear and nonlinear ac resistivity of the d-wave ceramic superconductors is obtained as function of temperature by solving the corresponding Langevin dynamical equations. We find that the linear ac resistivity remains finite at the temperature $T_p$ where the third harmonics of resistivity has a peak. The current amplitude dependence of t...

  16. Update on bedside ultrasound (US) diagnosis of acute cholecystitis (AC).

    Science.gov (United States)

    Zenobii, Maria Francesca; Accogli, Esterita; Domanico, Andrea; Arienti, Vincenzo

    2016-03-01

    Acute cholecystitis (AC) represents a principal cause of morbidity worldwide and is one of the most frequent reasons for hospitalization due to gastroenteric tract diseases. AC should be suspected in presence of clinical signs and of gallstones on an imaging study. Upper abdominal US represents the first diagnostic imaging step in the case of suspected AC. Computed tomography (CT) with intravenous contrast (IV) or magnetic resonance imaging (MRI) with gadolinium contrast and technetium hepatobiliary iminodiacetic acid (Tc-HIDA) can be employed to exclude complications. US examination should be performed with right subcostal oblique, with longitudinal and intercostal scans. Normal gallbladder US findings and AC major and minor US signs are described. Polyps, sludge and gallbladder wall thickening represent the more frequent pitfalls and they must be differentiated from stones, duodenal artifacts and many other non-inflammatory conditions that cause wall thickening, respectively. By means of bedside ultrasound, the finding of gallstones in combination with acute pain, when the clinician presses the gallbladder with the US probe (the sonographic Murphy's sign), has a 92.2 % positive predictive value for AC. In our preliminary experience, bedside US-performed by echoscopy (ES) and/or point-of-care US (POCUS) demonstrated good reliability in detecting signs of AC, and was always integrated with physical examination and performed by a skilled operator.

  17. AC electrophoretic deposition of organic-inorganic composite coatings.

    Science.gov (United States)

    Yoshioka, T; Chávez-Valdez, A; Roether, J A; Schubert, D W; Boccaccini, A R

    2013-02-15

    Alternating current electrophoretic deposition (AC-EPD) of polyacrylic acid (PAA)-titanium oxide (TiO(2)) nanoparticle composites on stainless steel electrodes was investigated in basic aqueous solution. AC square wave with duty cycle of 80% was applied at a frequency of 1 kHz. FTIR-ATR spectra showed that both AC and direct current (DC) EPD successfully deposited PAA-TiO(2) composites. The deposition rate using AC-EPD was lower than that obtained in direct current DC-EPD. However, the microstructure and surface morphology of the deposited composite coatings were different depending on the type of electric field applied. AC-EPD applied for not more than 5 min led to smooth films without bubble formation, while DC-EPD for 1 min or more showed deposits with microstructural defects possibly as result of water electrolysis. AC-EPD was thus for the first time demonstrated to be a suitable technique to deposit organic-inorganic composite coatings from aqueous suspensions, showing that applying a square wave and frequency of 1 kHz leads to uniform PAA-TiO(2) composite coatings on conductive materials.

  18. Temperature integration at the AC thermosensory neurons in Drosophila.

    Science.gov (United States)

    Tang, Xin; Platt, Michael D; Lagnese, Christopher M; Leslie, Jennifer R; Hamada, Fumika N

    2013-01-16

    Temperature sensation has a strong impact on animal behavior and is necessary for animals to avoid exposure to harmful temperatures. It is now well known that thermoTRP (transient receptor potential) channels in thermosensory neurons detect a variable range of temperature stimuli. However, little is known about how a range of temperature information is relayed and integrated in the neural circuits. Here, we show novel temperature integration between two warm inputs via Drosophila TRPA channels, TRPA1 and Pyrexia (Pyx). The internal AC (anterior cell) thermosensory neurons, which express TRPA1, detect warm temperatures and mediate temperature preference behavior. We found that the AC neurons were activated twice when subjected to increasing temperatures. The first response was at ∼25°C via TRPA1 channel, which is expressed in the AC neurons. The second response was at ∼27°C via the second antennal segments, indicating that the second antennal segments are involved in the detection of warm temperatures. Further analysis reveals that pyx-Gal4-expressing neurons have synapses on the AC neurons and that mutation of pyx eliminates the second response of the AC neurons. These data suggest that AC neurons integrate both their own TRPA1-dependent temperature responses and a Pyx-dependent temperature response from the second antennal segments. Our data reveal the first identification of temperature integration, which combines warm temperature information from peripheral to central neurons and provides the possibility that temperature integration is involved in the plasticity of behavioral outputs.

  19. A Novel High Performance Bridgeless Ac-Dc Boost Converter

    Directory of Open Access Journals (Sweden)

    S.M.AshrafulAlam Mohon

    2016-08-01

    Full Text Available A new single phase high performance bridgeless AC-DC Boost converter is proposed. The converter is made bridgeless by the use of two unidirectional switches and two diodes at the input ac side for power conversion for both positive and negative half cycle. Because of the high frequency switching, the power factor of the circuit is inherently corrected and it requires a small filter to make the input current near sinusoidal with limited THD. The significant improvement in THD makes the circuit a good choice in applications needing AC-DC conversion with power conditioning. The circuit exhibits such better performances than conventional AC-DC boost converter with variable loads at constant frequency switching with no additional control circuits. The efficiency of the circuit is also satisfactory. Analysis and simulation results of the circuit are obtained by using software simulation. The main advantage of this new AC-DC converter is its superior power quality over conventional AC-DC boost converter

  20. Diagnostics of the Fermilab Tevatron using an AC dipole

    Energy Technology Data Exchange (ETDEWEB)

    Miyamoto, Ryoichi [Univ. of Texas, Austin, TX (United States)

    2008-08-01

    The Fermilab Tevatron is currently the world's highest energy colliding beam facility. Its counter-rotating proton and antiproton beams collide at 2 TeV center-of-mass. Delivery of such intense beam fluxes to experiments has required improved knowledge of the Tevatron's beam optical lattice. An oscillating dipole magnet, referred to as an AC dipole, is one of such a tool to non-destructively assess the optical properties of the synchrotron. We discusses development of an AC dipole system for the Tevatron, a fast-oscillating (f ~ 20 kHz) dipole magnet which can be adiabatically turned on and off to establish sustained coherent oscillations of the beam particles without affecting the transverse emittance. By utilizing an existing magnet and a higher power audio amplifier, the cost of the Tevatron AC dipole system became relatively inexpensive. We discuss corrections which must be applied to the driven oscillation measurements to obtain the proper interpretation of beam optical parameters from AC dipole studies. After successful operations of the Tevatron AC dipole system, AC dipole systems, similar to that in the Tevatron, will be build for the CERN LHC. We present several measurements of linear optical parameters (beta function and phase advance) for the Tevatron, as well as studies of non-linear perturbations from sextupole and octupole elements.

  1. Controlo de um conversor AC-DC-AC para turbinas eólicas baseadas no PMSG

    OpenAIRE

    Bulhosa, João Paulo Rodrigues

    2009-01-01

    A dissertação teve como objectivo o estudo e implementação do controlo de um conversor AC-DC-AC, constituído por um conversor DC/DC elevador e um inversor de tensão monofásico, para efectuar a ligação à rede de turbinas eólicas baseadas no gerador síncrono de ímanes permanentes. O controlo global do conversor AC-DC-AC seguiu uma estratégia na qual o controlo do conversor elevador e do inversor de tensão monofásico é implementado de modo independente. O primeiro visa maximizar a potência ex...

  2. Development of an in-line filter to prevent intrusion of NO2 toxic vapors into A/C systems

    Science.gov (United States)

    Meneghelli, Barry; Mcnulty, R. J.; Springer, Mike; Lueck, Dale E.

    1995-01-01

    The hypergolic propellant nitrogen tetroxide (N2O4 or NTO) is routinely used in spacecraft launched at Kennedy Space Center (KSC) and Cape Canaveral Air Station (CCAS). In the case of a catastrophic failure of the spacecraft, there would be a release of the unspent propellant in the form of a toxic cloud. Inhalation of this material at downwind concentrations which may be as high as 20 parts per million (ppm) for 30 minutes in duration, may produce irritation to the eyes, nose and respiratory tract. Studies at both KSC and CCAS have shown that the indoor concentrations of N2O4 during a toxic release may range from 1 to 15 ppm and depend on the air change rate (ACR) for a particular building and whether or not the air conditioning (A/C) system has been shut down or left in an operating mode. This project was initiated in order to assess how current A/C systems could be easily modified to prevent personnel from being exposed to toxic vapors. A sample system has been constructed to test the ability of several types of filter material to capture the N2O4 vapors prior to their infiltration into the A/C system. Test results will be presented which compare the efficiencies of standard A/C filters, water wash systems, and chemically impregnated filter material in taking toxic vapors out of the incoming air stream.

  3. Study on AC/A ratio in myopia%近视患者AC/A率的临床意义

    Institute of Scientific and Technical Information of China (English)

    肖婉莉; 孙建宁

    2011-01-01

    目的:探讨AC/A率在近视发生发展中的作用及机制.方法:选择30名正视眼者(正视眼组)及90名近视眼者.对近视眼者根据屈光程度分为轻、中、高度近视眼3组;根据平时戴镜情况,分为从未戴镜、间断戴镜和持续戴镜组.采用同视机法测量AC/A率并进行分析和比较.结果:轻度近视眼组AC/A率平均值为(3.22±1.51)Δ/D,中度(3.46±1.00)Δ/D,高度(3.97±1.36)Δ/D,均高于正视眼组(P<0.05).从未戴镜组AC/A率高于间断戴镜及持续戴镜组(P<0.05).结论:近视患者高AC/A率是调节与辐辏功能不协调的一种表现,高AC/A率可导致眼球近视性改变.近视患者应进行矫正,恢复调节与辐辏的平衡.%Objective: To assess the difterence of accommodative convergence to accommodation (AC/A) ratio in myopia and emmetropia, then evaluate the relationship between AC/A ratio and myopia. Methods: Thirty emmetropia and 90 myopia cases were included in this study. The myopia cases were divided into mild myopia,moderate myopia and high myopia. The AC/A ratios were measured with a synoptophore, and the results were analyzed. Results: Average values of mild myopia group, moderate myopia group and high myopia group were (3.22 ± 1.51 ) Δ/D, (3.46 ± 1.00) Δ/D, (3.46 ± 1.00) Δ/D, a significant difference was found between each group and emmetropia group ( P < 0.05 ). The AC/A ratio of non- wearing glasses group was higher than that of discontinuous wearing and continued wearing glasses group. Conclusion: The increased AC/A ratio represents the incoordination of accommodations and convergences, which can lead to an aggravation of myopia, which should be readjusted.

  4. Safe-commutation principle for direct single-phase AC-AC converters for use in audio power amplification

    Energy Technology Data Exchange (ETDEWEB)

    Ljusev, P.; Andersen, Michael A.E.

    2005-07-01

    This paper presents an alternative safe commutation principle for a single phase bidirectional bridge, for use in the new generation of direct single-stage AC-AC audio power amplifiers. As compared with the bridge commutation with load current or source voltage sensing, in this approach it is not required to do any measurements, thus making it more reliable. Initial testing made on the prototype prove the feasibility of the approach. (au)

  5. Monoclonal antibodies AC-43 and AC-29 disrupt Plasmodium vivax development in the Indian malaria vector Anopheles culicifacies (Diptera: culicidae)

    Indian Academy of Sciences (India)

    Manoj Chugh; B R Gulati; S K Gakhar

    2010-03-01

    A repertoire of monoclonal antibodies (mAbs) was generated against the midgut proteins of Anopheles culicifacies mosquitoes. The mAbs AC-43 and AC-29 significantly inhibited Plasmodium vivax development inside the mosquito midgut. The number of oocysts that developed was reduced by 78.6% when mosquitoes ingested a combination of these two mAbs along with the blood meal. AC-43 mAb binds to the epitope common in 97, 80 and 43 kDa polypeptides from the midgut protein extract, as indicated by western blot analysis. Similarly, the mAb AC-29 recognized 52, 44, 40 and 29 kDa polypeptides. These female midgut-specific polypeptides are shared between An. culicifacies and An. stephensi, two major vectors of malaria in India. Deglycosylation assays revealed that -linked carbohydrates are the major components in epitopes corresponding to AC-43 and AC-29. Gold particle labelling revealed that both these mAbs preferentially bind to glycoproteins at the apical microvilli and the microvillus-associated network present inside transverse sections of the gut epithelium. These regions are particularly known to have receptors for ookinetes, which enable them to cross this epithelial barrier and provide them with certain necessary chemicals or components for further development into oocysts. Therefore, these glycoproteins appear to be potential candidates for a vectordirected transmission-blocking vaccine (TBV).

  6. Perceptions of breath alcohol concentration (BrAC) levels among a sample of bar patrons with BrAC values of 0.08% or higher.

    Science.gov (United States)

    Martin, Ryan J; Chaney, Beth H; Cremeens-Matthews, Jennifer; Vail-Smith, Karen

    2016-09-01

    Breath alcohol concentration (BrAC) is a commonly used measure of alcohol intoxication. Because of the potential negative consequences of excessive alcohol consumption, it is important to examine how accurately intoxicated individuals can estimate their BrAC values, especially individuals over the legal BrAC driving threshold (i.e., 0.08%). To better understand perceptions of BrAC values among intoxicated individuals, this field study examined actual BrAC values and BrAC range estimates (0.08% and above, 0.02-0.07%, less than 0.02%) among a sample of bar patrons (N = 454) with BrAC levels at 0.08% or higher. Bivariate and multivariate analyses were conducted to examine the relationship between actual BrAC values and perceived BrAC levels. We also examined whether the following demographic and drinking variables were associated with underestimating BrAC in this sample: gender, age, race, college student status, plans to get home, and hazardous drinking. Results indicated that the majority (60.4%) of participants underestimated their BrAC (i.e., less than 0.08%) and lower BrAC values correlated with underestimating BrAC ranges (p young (less than 21) intoxicated females are a group at high risk for sexual assault on college campuses. (PsycINFO Database Record PMID:27631614

  7. 21 CFR 880.6320 - AC-powered medical examination light.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered medical examination light. 880.6320... Miscellaneous Devices § 880.6320 AC-powered medical examination light. (a) Identification. An AC-powered medical examination light is an AC-powered device intended for medical purposes that is used to illuminate...

  8. An AC/AC Direct Power Conversion Topology Having Multiple Power Grid Connections with Adjustable Loading

    DEFF Research Database (Denmark)

    Klumpner, Christian; Blaabjerg, Frede

    2004-01-01

    these fraction power will be a necessary feature on a deregulated energy market. This paper presents a new topology of a power converter based on the Direct Power Conversion concept, which is able to connect to multiple grids and provide complete decoupling between without circulating power between the......Normally, a power converter has one supply port to connect to the power grid and one or multiple output ports to connect to AC loads that require variable voltage and variable frequency. As the trend on the energy market is towards deregulation, new converter topologies are needed to allow...... to minimize the overall energy cost or in case of special applications, to improve the system redundancy. Also, having a generator that can simultaneously feed fractions of its power into multiple grids which are not coupled (different voltage, frequency, displacement angle) and continuously adjust...

  9. Behaviour analysis of AC-600 passive safety systems

    International Nuclear Information System (INIS)

    Southwest Center of Reactor Engineering Research and Design has finished the first step conceptual design of 600 mwe advanced PWR (AC-600). The main research emphases of AC-600 conceptual design include the advanced reactor core, the passive safety systems and the simplification. The passive safety systems of AC-600 consist of two reactor make up water tanks, two accumulators, two emergency feedwater tanks, two emergency natural draft air condensers, a containment water jacket and an enhanced primary cycle natural circulation flow system. 25% of the rated reactor power can be removed by the natural circulation cooling. The full pressure reactor make up water tanks are able to provide enough borated water which would be injected into the reactor coolant system during small LOCA. The coolant natural circulations can be established in the primary system and the passive secondary emergency feedwater system, removing residual heat from the reactor core to the atmosphere when station blackout occurs. It is indicated from analysis that the containment diameter of AC-600 is about 35 m. The large tanks and the large vertical distances between the tanks and reactor core are the main reason of using the big containment. It is also indicated from analysis that the low head safety injection pumps are required in AC-600 design to assure the recirculation system operation when large LOCA occurs. The reliability of AC-600 engineered safety systems is increased because the function of the passive safety systems is conducted through the immutable natural laws. The paper discusses the natural circulation ability and safety behavior of the passive safety systems during LOCA or station blackout for AC-600. The passive limits to excess reactivity and thermal hydraulic transients are also preliminarily discussed. Figs and tabs

  10. Analysis of AC loss in superconducting power devices calculated from short sample data

    OpenAIRE

    Rabbers, J.J.; Haken, ten, Bennie; Kate, ten, F.J.W.

    2003-01-01

    A method to calculate the AC loss of superconducting power devices from the measured AC loss of a short sample is developed. In coils and cables the magnetic field varies spatially. The position dependent field vector is calculated assuming a homogeneous current distribution. From this field profile and the transport current, the local AC loss is calculated. Integration over the conductor length yields the AC loss of the device. The total AC loss of the device is split up in different compone...

  11. Temas de Física para Ingeniería: Acústica

    OpenAIRE

    Beléndez Vázquez, Augusto

    1992-01-01

    Acústica, fluidos y termodinámica: "Acústica". Ondas sonoras, propagación. Sonidos puros, sonidos complejos y ruidos. Velocidad de propagación del sonido. Intensidad del sonido y potencia acústica. Impedancia acústica y transmisión del sonido. Medición del campo acústico: niveles. Audición. Interferencia de ondas sonoras y pulsaciones. Tubos sonoros. Efecto Doppler.

  12. 一种简单新型拓扑Cuk AC/AC变换器及其仿真研究%A New Simple Topology of Cuk AC/AC Converter and Its Simulation

    Institute of Scientific and Technical Information of China (English)

    陈溪; 刘韬; 谭光慧; 纪延超

    2006-01-01

    由Cuk DC/DC变换器的拓扑结构导出一种只具有两个开关的PWM AC/AC变换器的简单新型拓扑--Cuk AC/AC变换器.给出单相和三相Cuk AC/AC变换器的拓扑结构,分析Cuk AC/AC变换器的外特性及小信号特性.仿真结果验证了所提的Cuk AC/AC变换器的合理性和可行性.

  13. Modelling ac ripple currents in HTS coated conductors

    Science.gov (United States)

    Xu, Zhihan; Grilli, Francesco

    2015-10-01

    Dc transmission using high temperature superconducting (HTS) coated conductors (CCs) offers a promising solution to the globally growing demand for effective, reliable and economic transmission of green energy up to the gigawatt level over very long distances. The credible estimation of the losses and thereby the heat dissipation involved, where ac ripples (introduced in rectification/ac-dc conversion) are viewed as a potential source of notable contribution, is highly essential for the rational design of practical HTS dc transmission cables and corresponding cryogenic systems to fulfil this demand. Here we report a targeted modelling study into the ac losses in a HTS CC subject to dc and ac ripple currents simultaneously, by solving Maxwell’s equations using the finite element method (FEM) in the commercial software package COMSOL. It is observed that the instantaneous loss exhibits only one peak per cycle in the HTS CC subject to sinusoidal ripples, given that the amplitude of the ac ripples is smaller than approximately 20% of that of the dc current. This is a distinct contrast to the usual observation of two peaks per cycle in a HTS CC subject to ac currents only. The unique mechanism is also revealed, which is directly associated with the finding that, around any local minima of the applied ac ripples, the critical state of -J c is never reached at the edges of the HTS CC, as it should be according to the Bean model. When running further into the longer term, it is discovered that the ac ripple loss of the HTS CC in full-wave rectification decays monotonically, at a speed which is found to be insensitive to the frequency of the applied ripples within our targeted situations, to a relatively low level of approximately 1.38 × 10-4 W m-1 in around 1.7 s. Comparison between this level and other typical loss contributions in a HTS dc cable implies that ac ripple currents in HTS CCs should only be considered as a minor source of dissipation in superconducting dc

  14. Design and synthesis of {sup 225}Ac radioimmunopharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    McDevitt, Michael R.; Ma, Dangshe; Simon, Jim; Frank, R. Keith; Scheinberg, David A. E-mail: d-scheinberg@ski.mskcc.org

    2002-12-01

    The alpha-particle-emitting radionuclides {sup 213}Bi, {sup 211}At, {sup 224}Ra are under investigation for the treatment of leukemias, gliomas, and ankylosing spondylitis, respectively. {sup 213}Bi and {sup 211}At were attached to monoclonal antibodies and used as targeted immunotherapeutic agents while unconjugated {sup 224}Ra chloride selectively seeks bone. {sup 225}Ac possesses favorable physical properties for radioimmunotherapy (10 d half-life and 4 net alpha particles), but has a history of unfavorable radiolabeling chemistry and poor metal-chelate stability. We selected functionalized derivatives of DOTA as the most promising to pursue from out of a group of potential {sup 225}Ac chelate compounds. A two-step synthetic process employing either MeO-DOTA-NCS or 2B-DOTA-NCS as the chelating moiety was developed to attach {sup 225}Ac to monoclonal antibodies. This method was tested using several different IgG systems. The chelation reaction yield in the first step was 93{+-}8% radiochemically pure (n=26). The second step yielded {sup 225}Ac-DOTA-IgG constructs that were 95{+-}5% radiochemically pure (n=27) and the mean percent immunoreactivity ranged from 25% to 81%, depending on the antibody used. This process has yielded several potential novel targeted {sup 225}Ac-labeled immunotherapeutic agents that may now be evaluated in appropriate model systems and ultimately in humans.

  15. AC losses in circular arrangements of parallel superconducting tapes

    DEFF Research Database (Denmark)

    Kühle (fratrådt), Anders Van Der Aa; Træholt, Chresten; Däumling, Manfred;

    1998-01-01

    The DC and AC properties of superconducting tapes connected in parellel and arranged in a single closed layer on two tubes (correspondig to power cable models with infinite pitch) with different diameters are compared. We find that the DC properties, i.e. the critical currents of the two arrangem......The DC and AC properties of superconducting tapes connected in parellel and arranged in a single closed layer on two tubes (correspondig to power cable models with infinite pitch) with different diameters are compared. We find that the DC properties, i.e. the critical currents of the two...... arrangements, scale with the number of tapes and hence appear to be independent of the diameter.However, the AC loss per tape (for a given current per tape) appears to decrease with increasing diameter of the circular arrangement. Compared to a model for the AC loss in a continuous superconducting layer...... (Monoblock model) the measured values are about half an order of magnitude higher than expected for the small diameter arrangement. When compared to the AC loss calculated for N individual superconducting tapes using a well known model ( Norris elliptical) the difference is slightly smaller....

  16. AC Zeeman potentials for atom chip-based ultracold atoms

    Science.gov (United States)

    Fancher, Charles; Pyle, Andrew; Ziltz, Austin; Aubin, Seth

    2015-05-01

    We present experimental and theoretical progress on using the AC Zeeman force produced by microwave magnetic near-fields from an atom chip to manipulate and eventually trap ultracold atoms. These AC Zeeman potentials are inherently spin-dependent and can be used to apply qualitatively different potentials to different spin states simultaneously. Furthermore, AC Zeeman traps are compatible with the large DC magnetic fields necessary for accessing Feshbach resonances. Applications include spin-dependent trapped atom interferometry and experiments in 1D many-body physics. Initial experiments and results are geared towards observing the bipolar detuning-dependent nature of the AC Zeeman force at 6.8 GHz with ultracold 87Rb atoms trapped in the vicinity of an atom chip. Experimental work is also underway towards working with potassium isotopes at frequencies of 1 GHz and below. Theoretical work is focused on atom chip designs for AC Zeeman traps produced by magnetic near-fields, while also incorporating the effect of the related electric near-fields. Electromagnetic simulations of atom chip circuits are used for mapping microwave propagation in on-chip transmission line structures, accounting for the skin effect, and guiding impedance matching.

  17. Impedance, AC conductivity and dielectric behavior Adeninium Trichloromercurate (II)

    Science.gov (United States)

    Fersi, M. Amine; Chaabane, I.; Gargouri, M.

    2016-09-01

    In this work, we report the measurements impedance spectroscopy technique for the organic-inorganic hybrid compound (C5H6N5) HgCl3, 11/2H2O measured in the 209 Hz-5 MHz frequency range from 378 to 428 K. Besides, the Cole-Cole (Z″ versus Z‧) plots were well fitted to an equivalent circuit built up by a parallel combination of resistance (R), fractal capacitance (CPE) and capacitance (C). Furthermore, the AC conductivity was investigated as a function of temperature and frequency in the same range. The experiment results indicated that AC conductivity (σac) was proportional to σdc + A ωS . The obtained results are discussed in terms of the correlated barrier hopping (CBH) model. An agreement between the experimental and theoretical results suggests that the AC conductivity behavior of Adeninium Trichloromercurate (II) can be successfully explained by CBH model. The contribution of single polaron hopping to AC conductivity in a present alloy was also studied.

  18. COMPARISON OF BACTERIAL ADSORPTION AND ANTIBACTERIAL PROPERTIES BETWEEN AC AND AC(Ag)%AC及AC(Ag)对细菌的吸附及灭菌功能的对比研究

    Institute of Scientific and Technical Information of China (English)

    万怡灶; 王玉林; 董向红; 周福刚; 成国祥; 温廷益; 韩森

    2000-01-01

    测定了活性碳(AC)及载银活性碳(AC(Ag))的比表面积和孔径分布曲线,对比研究了AC及AC(Ag))对大肠杆菌的吸附能力和灭菌性能.结果表明,载银后,虽然AC(Ag)的比表面积下降,但由于银的存在,使其吸附的大肠杆菌数量高于AC,而吸附速率低于AC.灭菌试验表明,AC对大肠杆菌没有杀灭能力,而AC(Ag)对大肠杆菌有较好的灭菌功能.

  19. Common Software for the ALMA project

    CERN Document Server

    Chiozzi, G; Jeram, B; Sivera, P; Plesko, M; Sekoranja, M; Tkacik, G; Dovc, J; Kadunc, M; Milcinski, G; Verstovsek, I; Zagar, K

    2001-01-01

    The Atacama Large Millimeter Array (ALMA) is a joint project between astronomical organizations in Europe, USA and Japan. ALMA will consist of at least 64 12-meter antennas operating in the millimeter and sub-millimeter wavelength range, with baselines up to 10 km. It will be located at an altitude above 5000m in the Chilean Atacama desert[1]. The ALMA Common Software (ACS) provides a software infrastructure common to all partners and consists of a documented collection of common patterns in control systems and of components, which implement those patterns. The heart of ACS is an object model of controlled devices, called Distributed Objects (DOs), implemented as CORBA network objects. Components such as antenna mount, power supply, etc. are defined by means of DOs. A code generator creates Java Bean components for each DO. Programmers can write Java client applications by connecting those Beans with data-manipulation and visualization Beans using commercial visual development tools or programmatically. ACS i...

  20. Variable transposition of eight maize activator (ac) elements located on the short arm of chromosome 1.

    Science.gov (United States)

    Sheridan, William F

    2011-09-01

    Eight Activator (Ac) transposable elements mapped to the maize chromosome arm 1S were assessed for Ac transposition rates. For each of the Ac stocks, plants homozygous for the single Ac element and the Ds reporter r1-sc:m3 on chromosome 10 were crossed as females by a homozygous r1-sc:m3 tester color-converted W22 line. The resulting ears produced mostly coarsely spotted kernels and a low frequency of either near-colorless fine-spotted kernels or nonspotted kernels. The relative frequency of these two types of near-colorless kernels differed among the eight Ac stocks. The extent to which increased Ac dosage results in nonspotted kernels may be Ac-specific. Although all of the Ac elements are in near-isogenic inbred W22 lines, they varied to a large extent in their transposition frequency. These differences might possibly result from structural differences among the Ac elements. Because one pair of Ac elements derived from Ac33 on chromosome arm 5S differed about 13-fold in transposition frequency and a second pair of Ac elements derived from Ac12 on chromosome arm 1S differed about 3-fold in transposition frequency, this is not a likely explanation for all eight Ac elements. The data presented here support the notion that the differences in transposition frequency of the eight Ac elements may be a reflection of variability in Ac transcription or accessibility of the transposase to the Ac element, resulting from differences in the chromatin environments wherein the Ac elements are located. This is the first report of variability in transposition rates among different Ac donor lines.

  1. Neural network based PWM AC chopper fed induction motor drive

    Directory of Open Access Journals (Sweden)

    Venkatesan Jamuna

    2009-01-01

    Full Text Available In this paper, a new Simulink model for a neural network controlled PWM AC chopper fed single phase induction motor is proposed. Closed loop speed control is achieved using a neural network controller. To maintain a constant fluid flow with a variation in pressure head, drives like fan and pump are operated with closed loop speed control. The need to improve the quality and reliability of the drive circuit has increased because of the growing demand for improving the performance of motor drives. With the increased availability of MOSFET's and IGBT's, PWM converters can be used efficiently in low and medium power applications. From the simulation studies, it is seen that the PWM AC chopper has a better harmonic spectrum and lesser copper loss than the Phase controlled AC chopper. It is observed that the drive system with the proposed model produces better dynamic performance, reduced overshoot and fast transient response. .

  2. Strongly nonlinear dynamics of electrolytes in large ac voltages

    DEFF Research Database (Denmark)

    Olesen, Laurits Højgaard; Bazant, Martin Z.; Bruus, Henrik

    2010-01-01

    We study the response of a model microelectrochemical cell to a large ac voltage of frequency comparable to the inverse cell relaxation time. To bring out the basic physics, we consider the simplest possible model of a symmetric binary electrolyte confined between parallel-plate blocking electrodes...... in the electrolyte near the electrodes and, at very large voltage, the breakdown of the quasiequilibrium structure of the double layers. The former leads to the prediction of “ac capacitive desalination” since there is a time-averaged transfer of salt from the bulk to the double layers, via oscillating diffusion...... nonlinear responses to large ac voltages, such as Faradaic reactions, electro-osmotic instabilities, and induced-charge electrokinetic phenomena....

  3. The minimization of ac phase noise in interferometric systems

    DEFF Research Database (Denmark)

    Filinski, Ignacy; Gordon, R A

    1994-01-01

    A simple step-by-step procedure, including several novel techniques discussed in the Appendices, is given for minimizing ac phase noise in typical interferometric systems such as two-beam interferometers, holographic setups, four-wave mixers, etc. Special attention is given to index of refraction...... fluctuations, direct mechanical coupling, and acoustic coupling, whose importance in determining ac phase noise in interferometric systems has not been adequately treated. The minimization procedure must be carried out while continuously monitoring the phase noise which can be done very simply by using....... Such a change will lead to a reduction of both low-frequency and high-frequency ac phase noise by more than an order of magnitude and can be carried out for all interferometers with the exception of multiple pass optical systems and high-resolution FFT spectrometers. It is pointed out that most homemade air...

  4. On the Application of TLS Techniques to AC Electrical Drives

    Directory of Open Access Journals (Sweden)

    M. Cirrincione

    2005-03-01

    Full Text Available This paper deals with the application of a new neuron, the TLS EXIN neuron, to AC induction motor drives. In particular, it addresses two important subjects of AC induction motor drives: the on-line estimation of the electrical parameters of the machine and the speed estimation in sensorless drives. On this basis, this work summarizes the parameter estimation and sensorless techniques already developed by the authors over these last few years, all based on the TLS EXIN. With regard to sensorless, two techniques are proposed: one based on the MRAS and the other based on the full-order Luenberger observer. The work show some of the most significant results obtained by the authors in these fields and stresses the important potentiality of this new neural technique in AC induction machine drives.

  5. Offshore windfarm connection with low frequency AC transmission technology

    DEFF Research Database (Denmark)

    Qin, Nan; Xu, Zhao; You, Shi;

    2009-01-01

    This paper investigates the feasibility of using the low frequency AC transmission (LFAC) system, e.g. fraction of 50 Hz or 60 Hz, for connecting the large offshore wind farm to the grid by modelling and simulation. The LFAC system improves the transmission capacity and distance compared to the c......This paper investigates the feasibility of using the low frequency AC transmission (LFAC) system, e.g. fraction of 50 Hz or 60 Hz, for connecting the large offshore wind farm to the grid by modelling and simulation. The LFAC system improves the transmission capacity and distance compared...... to the conventional AC solution at the nominal frequency, e.g. 50 Hz or 60 Hz. and reduces the investment cost compared to the HVDC solution. It is estimated that the LFAC system is competitive in the transmission distance of about 30-150 km. The simulation model of the wind integration using the LFAC system has been...

  6. Experiments on Corona Discharge Under AC and DC Composite Voltage

    Institute of Scientific and Technical Information of China (English)

    ZHU Zhengyi; LI Ruihai; WANG Guoli; CHEN Can; JIA Zhidong; GUAN Zhicheng

    2012-01-01

    Converter transformers are one of the most important electrical apparatuses in the ultra high voltage(UHV) DC transmission systems.The valve side and the low voltage(LV) bushing are stressed by long-term AC and DC composite voltage leading to significant partial discharge(PD) and posing great danger to the insulation system.In this paper AC and DC composite voltage is applied on a metal needle-plate model to produce PD signal sequences,and then the pulse waveshape and frequency spectrum are analyzed and compared with PD signals under conventional AC or DC voltage.In the end,the phase-resolved distribution is analyzed to depict the new characteristics of PD under this composite voltage.

  7. Harmonic-free line-commutated ac/dc rectifiers

    Energy Technology Data Exchange (ETDEWEB)

    Villablanca, Miguel E. [Electrical Engineering Department, University of Santiago, P.O. Box 10233, Santiago (Chile)

    2009-11-15

    In this paper both a method and apparatus are applied to different configurations of line-commutated ac/dc rectifiers to reduce the distortion of currents flowing from the ac supply. The load may be either inductive or capacitive. The technology involves an accurate shaping of the dc current by using two self-commutated switches. This dc-current shaping is reflected back into the shaping of the ac input currents, which become pure sine waves. Thyristor-based rectifying operation is possible with a simple control circuit, which is able to deal with both rapid load variations and failures in the self-commutated switches. Furthermore, the overlap conduction of bridge thyristors is eliminated completely. Experimental verification is provided from a 400-V 30-kVA 50-Hz laboratory prototype. (author)

  8. Theory of the ac spin-valve effect.

    Science.gov (United States)

    Kochan, Denis; Gmitra, Martin; Fabian, Jaroslav

    2011-10-21

    The spin-valve complex magnetoimpedance of symmetric ferromagnet-normal-metal-ferromagnet junctions is investigated within the drift-diffusion (standard) model of spin injection. The ac magnetoresistance-the real part difference of the impedances of the parallel and antiparallel magnetization configurations-exhibits an overall damped oscillatory behavior, as an interplay of the diffusion and spin relaxation times. In wide junctions the ac magnetoresistance oscillates between positive and negative values, reflecting resonant amplification and depletion of the spin accumulation, while the line shape for thin tunnel junctions is predicted to be purely Lorentzian. The ac spin-valve effect could be a technique to extract spin transport and spin relaxation parameters in the absence of a magnetic field and for a fixed sample size. PMID:22107552

  9. Aligned Immobilization of Proteins Using AC Electric Fields.

    Science.gov (United States)

    Laux, Eva-Maria; Knigge, Xenia; Bier, Frank F; Wenger, Christian; Hölzel, Ralph

    2016-03-01

    Protein molecules are aligned and immobilized from solution by AC electric fields. In a single-step experiment, the enhanced green fluorescent proteins are immobilized on the surface as well as at the edges of planar nanoelectrodes. Alignment is found to follow the molecules' geometrical shape with their longitudinal axes parallel to the electric field. Simultaneous dielectrophoretic attraction and AC electroosmotic flow are identified as the dominant forces causing protein movement and alignment. Molecular orientation is determined by fluorescence microscopy based on polarized excitation of the proteins' chromophores. The chromophores' orientation with respect to the whole molecule supports X-ray crystal data. PMID:26779699

  10. Droop-free Distributed Control for AC Microgrids

    DEFF Research Database (Denmark)

    Nasirian, Vahidreza; Shafiee, Qobad; Guerrero, Josep M.;

    2016-01-01

    A cooperative distributed secondary/primary control paradigm for AC microgrids is proposed. This solution replaces the centralized secondary control and the primary-level droop mechanism of each inverter with three separate regulators: voltage, reactive power, and active power regulators. A sparse...... guidelines are provided. Steady-state performance analysis shows that the proposed controller can accurately handle the global voltage regulation and proportional load sharing. An AC microgrid prototype is set up, where the controller performance, plug-and-play capability, and resiliency to the failure...

  11. AC and Phase Sensing of Nanowires for Biosensing.

    Science.gov (United States)

    Crescentini, Marco; Rossi, Michele; Ashburn, Peter; Lombardini, Marta; Sangiorgi, Enrico; Morgan, Hywel; Tartagni, Marco

    2016-04-19

    Silicon nanowires are label-free sensors that allow real-time measurements. They are economical and pave the road for point-of-care applications but require complex readout and skilled personnel. We propose a new model and technique for sensing nanowire sensors using alternating currents (AC) to capture both magnitude and phase information from the sensor. This approach combines the advantages of complex impedance spectroscopy with the noise reduction performances of lock-in techniques. Experimental results show how modifications of the sensors with different surface chemistries lead to the same direct-current (DC) response but can be discerned using the AC approach.

  12. Active Power Regulation based on Droop for AC Microgrid

    DEFF Research Database (Denmark)

    Li, Chendan; Coelho, Ernane A. A.; Firoozabadi, Mehdi Savaghebi;

    2015-01-01

    In this paper, two different control strategies are proposed to address the active power regulation issue in AC microgrids. The principle of power regulation in the droop controller is firstly introduced. Frequency scheduling and droop gain scheduling on top of droop control is proposed to succes......In this paper, two different control strategies are proposed to address the active power regulation issue in AC microgrids. The principle of power regulation in the droop controller is firstly introduced. Frequency scheduling and droop gain scheduling on top of droop control is proposed...

  13. Unbalanced Voltage Compensation in Low Voltage Residential AC Grids

    DEFF Research Database (Denmark)

    Trintis, Ionut; Douglass, Philip; Munk-Nielsen, Stig

    2016-01-01

    This paper describes the design and test of a control algorithm for active front-end rectifiers that draw power from a residential AC grid to feed heat pump loads. The control algorithm is able to control the phase to neutral or phase to phase RMS voltages at the point of common coupling. The vol......This paper describes the design and test of a control algorithm for active front-end rectifiers that draw power from a residential AC grid to feed heat pump loads. The control algorithm is able to control the phase to neutral or phase to phase RMS voltages at the point of common coupling...

  14. Development of an AC Module System: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Suparna Kadam; Miles Russell

    2012-06-15

    The GreenRay Inc. program focused on simplifying solar electricity and making it affordable and accessible to the mainstream population. This was accomplished by integrating a solar module, micro-inverter, mounting and monitoring into a reliable, 'plug and play' AC system for residential rooftops, offering the following advantages: (1) Reduced Cost: Reduction in installation labor with fewer components, faster mounting, faster wiring. (2) Maximized Energy Production: Each AC Module operates at its maximum, reducing overall losses from shading, mismatch, or module downtime. (3) Increased Safety. Electrical and fire safety experts agree that AC Modules have significant benefits, with no energized wiring or live connections during installation, maintenance or emergency conditions. (4) Simplified PV for a Broader Group of Installers. Dramatic simplification of design and installation of a solar power system, enabling faster and more efficient delivery of the product into the market through well-established, mainstream channels. This makes solar more accessible to the public. (5) Broadened the Rooftop Market: AC Modules enable solar for many homes that have shading, split roofs, or obstructions. In addition, due to the smaller building block size of 200W vs. 1000W, homeowners with budget limitations can start small and add to their systems over time. Through this DOE program GreenRay developed the all-in-one AC Module system with an integrated PV Module and microinverter, custom residential mounting and performance monitoring. Development efforts took the product from its initial concept, through prototypes, to a commercial product sold and deployed in the residential market. This pilot deployment has demonstrated the technical effectiveness of the AC Module system in meeting the needs and solving the problems of the residential market. While more expensive than the traditional central inverter systems at the pilot scale, the economics of AC Modules become

  15. Advanced Sensors for Accurate, Broadband AC Voltage Metrology

    Science.gov (United States)

    Lipe, Thomas E.; Kinard, Joseph R.; Novotny, Donald B.; Sims, June E.

    2013-06-01

    We report on advances in ac voltage metrology made possible by a new generation of Multijunction Thermal Converters (MJTCs). Although intended for use primarily in high-frequency (1 MHz to 100 MHz) metrology, their exceptional low-frequency qualities, combined with a large dynamic range, makes these MJTCs excellent devices for the frequency range 10 Hz to 100 MHz at voltages from 1 V to 20 V, depending on the design. We anticipate that these devices will form the future basis for ac voltage metrology at the National Institute of Standards and Technology (NIST).

  16. AC transport in graphene-based Fabry-Perot devices

    OpenAIRE

    Rocha, Claudia G; Torres, Luis E. F. Foa; Cuniberti, Gianaurelio

    2009-01-01

    We report on a theoretical study of the effects of time-dependent fields on electronic transport through graphene nanoribbon devices. The Fabry-P\\'{e}rot interference pattern is modified by an ac gating in a way that depends strongly on the shape of the graphene edges. While for armchair edges the patterns are found to be regular and can be controlled very efficiently by tuning the ac field, samples with zigzag edges exhibit a much more complex interference pattern due to their peculiar elect...

  17. Interlayer thermal conductivity of rubrene measured by ac-calorimetry

    Science.gov (United States)

    Zhang, H.; Brill, J. W.

    2013-07-01

    We have measured the interlayer thermal conductivity of crystals of the organic semiconductor rubrene, using ac-calorimetry. Since ac-calorimetry is most commonly used for measurements of the heat capacity, we include a discussion of its extension for measurements of the transverse thermal conductivity of thin crystals of poor thermal conductors, including the limitations of the technique. For rubrene, we find that the interlayer thermal conductivity, ≈0.7 mW/cm . K, is several times smaller than the (previously measured) in-layer value, but its temperature dependence indicates that the interlayer mean free path is at least a few layers.

  18. A.C. losses in current-carrying superconductors

    International Nuclear Information System (INIS)

    The feasibility of superconductors for alternating current use depends on successful reduction of losses. Moreover, the demand for large field amplitudes is a stimulation for investigating the nature of a.c. losses (e.g. in the set of poloidal coils in a TOKAMAK). In this thesis, measurements are performed at a.c. superconductivity. Attention is given to various external field conditions as well as to self-field instability. Measurements are performed on different types of wires. A type of wire is searched for with both low losses and a good stabilization under self-field conditions. (G.J.P.)

  19. EHV AC undergrounding electrical power performance and planning

    CERN Document Server

    Benato, Roberto

    2010-01-01

    EHV AC Undergrounding Electrical Power discusses methods of analysis for cable performance and for the behaviour of cable, mixed and overhead lines. The authors discuss the undergrounding of electrical power and develop procedures based on the standard equations of transmission lines. They also provide technical and economical comparisons of a variety of cables and analysis methods, in order to examine the performance of AC power transmission systems. A range of topics are covered, including: energization and de-energization phenomena of transmission lines; power quality; and cable safety cons

  20. Interplay between electron overheating and ac Josephson effect

    Science.gov (United States)

    De Cecco, A.; Le Calvez, K.; Sacépé, B.; Winkelmann, C. B.; Courtois, H.

    2016-05-01

    We study the response of high-critical-current proximity Josephson junctions to a microwave excitation. Electron overheating in such devices is known to create hysteretic dc voltage-current characteristics. Here we demonstrate that it also strongly influences the ac response. The interplay of electron overheating and ac Josephson dynamics is revealed by the evolution of the Shapiro steps with the microwave drive amplitude. Extending the resistively shunted Josephson junction model by including a thermal balance for the electronic bath coupled to phonons, a strong electron overheating is obtained.

  1. Comportamiento acústico de espacios cubiertos con estructuras textiles

    OpenAIRE

    Maya Simoes, Flavio

    2000-01-01

    En el presente trabajo estudiamos el comportamiento acústico de espacios cubiertos con textiles. Presentamos una reseña histórica de usos de textiles en la arquitectura, de la prehistoria hasta hoy. Realizamos una búsqueda bibliográfica y presentamos los resultados encontrados. Presentamos la metodología actual de análisis acústico que se utiliza en ensayos de laboratorio, simulaciones y mediciones. Estudiamos la absorción sonora de los materiales de las cubiertas textiles, en ensayos de labo...

  2. Study of AC/RF properties of SRF ingot niobium

    Energy Technology Data Exchange (ETDEWEB)

    Dhakal, Pashupati; Tsindlekht, Menachem I; Genkin, Valery M; Ciovati, Gianluigi; Myneni, Ganapati Rao

    2013-09-01

    In an attempt to correlate the performance of superconducting radiofrequency cavities made of niobium with the superconducting properties, we present the results of the magnetization and ac susceptibility of the niobium used in the superconducting radiofrequency cavity fabrication. The samples were subjected to buffer chemical polishing (BCP) surface and high temperature heat treatments, typically applied to the cavities fabrications. The analysis of the results show the different surface and bulk ac conductivity for the samples subjected to BCP and heat treatment. Furthermore, the RF surface impedance is measured on the sample using a TE011 microwave cavity for a comparison to the low frequency measurements.

  3. Programmable Power Supply for AC Switching Magnet of Proton Accelerator

    CERN Document Server

    Jeong, Seong-Hun; Kang Heung Sik; Lee, Chi-Hwan; Lee, Hong-Gi; Park, Ki-Hyeon; Ryu, Chun-Kil; Sik Han, Hong; Suck Suh, Hyung

    2005-01-01

    The 100-MeV PEFP proton linac has two proton beam extraction lines for user' experiment. Each extraction line has 5 beamlines and has 5 Hz operating frequency. An AC switching magnet is used to distribute the proton beam to the 5 beamlines, An AC switching magnet is powered by PWM-controlled bipolar switching-mode converters. This converter is designed to operate at ±350A, 5 Hz programmable step output. The power supply is employed IGBT module and has controlled by a DSP (Digital Signal Process). This paper describes the design and test results of the power supply.

  4. System and method for determining stator winding resistance in an AC motor using motor drives

    Science.gov (United States)

    Lu, Bin; Habetler, Thomas G; Zhang, Pinjia

    2013-02-26

    A system and method for determining the stator winding resistance of AC motors is provided. The system includes an AC motor drive having an input connectable to an AC source and an output connectable to an input terminal of an AC motor, a pulse width modulation (PWM) converter having switches therein to control current flow and terminal voltages in the AC motor, and a control system connected to the PWM converter. The control system generates a command signal to cause the PWM converter to control an output of the AC motor drive corresponding to an input to the AC motor, selectively generates a modified command signal to cause the PWM converter to inject a DC signal into the output of the AC motor drive, and determines a stator winding resistance of the AC motor based on the DC signal of at least one of the voltage and current.

  5. Development of a New Class of Low Cost, High Frequency Link Direct DC to AC Converters for Solid Oxide Fuel Cells (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Prasad Enjeti; J.W. Howze

    2003-12-01

    This project proposes to design and develop a new class of power converters (direct DC to AC) to drastically improve performance and optimize the cost, size, weight and volume of the DC to AC converter in SOFC systems. The proposed topologies employ a high frequency link; direct DC to AC conversion approach. The direct DC to AC conversion approach is more efficient and operates without an intermediate dc-link stage. The absence of the dc-link, results in the elimination of bulky, aluminum electrolytic capacitors, which in turn leads to a reduction in the cost, volume, size and weight of the power electronic converter. The feasibility of two direct DC to AC converter topologies and their suitability to meet SECA objectives will be investigated. Laboratory proto-type converters (3-5kW) will be designed and tested in Phase-1. A detailed design trade-off study along with the test results will be available in the form of a report for the evaluation of SECA Industrial partners. This project proposes to develop a new and innovative power converter technology suitable for Solid Oxide Fuel Cell (SOFC) power systems in accordance with SECA objectives. The proposed fuel cell inverter (FCI) employs state of the art power electronic devices configured in two unique topologies to achieve direct conversion of DC power (24-48V) available from a SOFC to AC power (120/240V, 60Hz) suitable for utility interface and powering stand alone loads. The primary objective is to realize cost effective fuel cell converter, which operates under a wide input voltage range, and output load swings with high efficiency and improved reliability.

  6. The ACS Survey of Galactic Globular Clusters. I. Overview and Clusters Without Previous HST Photometry

    CERN Document Server

    Sarajedini, A; Chaboyer, B; Dotter, A; Siegel, M; Anderson, J; Aparicio, A; King, I; Majewski, S; Marin-Franch, A; Piotto, G; Reid, I N; Rosenberg, A L; Sarajedini, Ata

    2006-01-01

    We present the first results of a large ACS Survey of Galactic globular clusters. This Hubble Space Telescope (HST) Treasury project is designed to obtain photometry with S/N > ~10 for main sequence stars with masses > ~0.2Msun in a sample of globulars using the Advanced Camera for Surveys (ACS) Wide Field Channel. Here we focus on clusters without previous HST imaging data. These include NGC 5466, 6779, 5053, 6144, Palomar 2, E 3, Lynga 7, Palomar 1, and NGC 6366. Our CMDs extend reliably from the horizontal branch to as much as seven magnitudes fainter than the main sequence turnoff and represent the deepest CMDs published to-date for these clusters. Using fiducial sequences for three standard clusters (M92, NGC 6752, and 47 Tuc) with well-known metallicities and distances, we perform main sequence fitting on the target clusters in order to obtain estimates of their distances and reddenings. These comparisons along with fitting the cluster main sequences to theoretical isochrones yield ages for the target c...

  7. Design of a Temperature Sensitive Voltage Regulator for AC Load using RTD

    Directory of Open Access Journals (Sweden)

    Tasnuva Chowdhury,

    2010-12-01

    Full Text Available Voltage regulation of an electrical load has always been a necessity with the variation of atmospheric temperature. Human body undergoes troubles and sufferings when there is a certain change arises in the surrounding temperature and he or she might not be able to cope up with the sudden environmental change. To make life easier and better adjusted to the natural temperature change, a temperature sensitive voltage regulator have been designed and implemented in this work. Here a temperature sensor called Resistor Temperature Detector (RTD is used for temperature sensing purpose which delivers its output to the input of a voltage controller circuit and can subsequently control the speed of any light AC electrical load according to the variable temperature. In our project , the RTD was able to take the reading from 26oC to 38oC accurately. Moreover, the room temperature is also made visible by two 7-segment display. The circuit is synchronized and tested with the cheapest AC load (bulb availablein the market.

  8. 海南联网工程500 kV交流海底电缆雷电侵入波过电压研究%Research on Lightning Intruding Overvoltage of 500 kV AC Submarine Cable of Hainan Interconnection Project

    Institute of Scientific and Technical Information of China (English)

    张正祥; 李健; 赵远涛; 罗楚军; 郑伟

    2015-01-01

    海底电缆雷电侵入波过电压问题对于南方主网与海南电网联网工程的设计、运行和管理具有重要影响。基于EMTP/ATP软件,对海南联网工程进线段架空线遭受雷电绕击及反击时海底电缆的过电压水平进行了计算分析,得到了该工程500 kV海底电缆的雷电耐受电压值,提出了提高电缆安全裕度的措施和建议。研究成果可为海底电缆雷电冲击水平的确定及电缆设计、运行提供参考。%The problem of lightning intruding overvoltage of submarine cable has an important influence on design, operation and manage-ment of China Southern Main Power Grid&Hainan Power Grid Interconnection Project. Based on EMTP/ATP, overvoltage levels of the 500 kV submarine cable due to shielding failure and back striking of the incoming aerial wires are calculated and analyzed. The value of lightning withstand voltage of the 500 kV submarine cables is calculated and measures for safety margin improvement are proposed. The research re-sults provide a reference for determination of lightning impulse level as well as design and operation of submarine cables.

  9. Modulation schemes with enhanced switch thermal distribution for single-phase AC-DC-AC reduced-switch converters

    DEFF Research Database (Denmark)

    Qin, Zian; Loh, Poh Chiang; Blaabjerg, Frede

    2015-01-01

    ulation schemes can significantly change the performance of a power converter in steady state, and they have been extensively studied, but mostly directed to three-phase topologies, where triplen offsets are added. Single-phase systems, including ac-dc-ac systems, are less widely pursued, even...... among their switches, while keeping their dc-link voltages low. Single points of failure are thus minimized, allowing the converters to have longer lifetimes. Simulation and experimental results have demonstrated the intended performances and hence verifying the idea....

  10. Impacts on Power Factor of AC Voltage Controllers Under Non-Sinusoidal Conditions

    Directory of Open Access Journals (Sweden)

    Mukhtiar Ahmed Mahar

    2012-04-01

    Full Text Available AC-AC conversion is obtained with the help of Cyclo-converters, DC Link converters and AC Voltage Controllers. AC voltage controllers are also referred to as voltage regulators. Main issue concerned to these converters is that they generate harmonics due to periodic variable structure system. The generated harmonics create disturbances and degrade the performance of converter. The power factor of supply side is affected due to these harmonics. This paper focuses on source side power factor of ac voltage controllers under nonsinusoidal conditions. In order to observe the power factor, measurement tool of power factor and simulation model of ac voltage controller is also developed in MATLAB software.

  11. Two very long chain fatty acid acyl-CoA synthetase genes, acs-20 and acs-22, have roles in the cuticle surface barrier in Caenorhabditis elegans.

    Directory of Open Access Journals (Sweden)

    Eriko Kage-Nakadai

    Full Text Available In multicellular organisms, the surface barrier is essential for maintaining the internal environment. In mammals, the barrier is the stratum corneum. Fatty acid transport protein 4 (FATP4 is a key factor involved in forming the stratum corneum barrier. Mice lacking Fatp4 display early neonatal lethality with features such as tight, thick, and shiny skin, and a defective skin barrier. These symptoms are strikingly similar to those of a human skin disease called restrictive dermopathy. FATP4 is a member of the FATP family that possesses acyl-CoA synthetase activity for very long chain fatty acids. How Fatp4 contributes to skin barrier function, however, remains to be elucidated. In the present study, we characterized two Caenorhabditis elegans genes, acs-20 and acs-22, that are homologous to mammalian FATPs. Animals with mutant acs-20 exhibited defects in the cuticle barrier, which normally prevents the penetration of small molecules. acs-20 mutant animals also exhibited abnormalities in the cuticle structure, but not in epidermal cell fate or cell integrity. The acs-22 mutants rarely showed a barrier defect, whereas acs-20;acs-22 double mutants had severely disrupted barrier function. Moreover, the barrier defects of acs-20 and acs-20;acs-22 mutants were rescued by acs-20, acs-22, or human Fatp4 transgenes. We further demonstrated that the incorporation of exogenous very long chain fatty acids into sphingomyelin was reduced in acs-20 and acs-22 mutants. These findings indicate that C. elegans Fatp4 homologue(s have a crucial role in the surface barrier function and this model might be useful for studying the fundamental molecular mechanisms underlying human skin barrier and relevant diseases.

  12. Projects Work!

    Science.gov (United States)

    Textor, Martin R.

    2005-01-01

    The great educational value of projects is emphasized by contrasting negative aspects of the life of today's children with the goals of project work. This is illustrated by a project "Shopping." It is shown what children are learning in such projects and what the advantages of project work are. Relevant topic areas, criteria for selecting a…

  13. NRT Atmospheric Water Vapour Retrieval on the Area of Poland at IGG WUELS AC

    Science.gov (United States)

    Kaplon, Jan; Bosy, Jaroslaw; Sierny, Jan; Hadas, Tomasz; Rohm, Witold; Wilgan, Karina; Ryczywolski, Marcin; Oruba, Artur; Kroszczynski, Krzysztof

    2013-04-01

    Global Navigation Satellite Systems (GNSS) are designed for positioning, navigation and amongst other possible applications it can also be used to derive information about the state of the atmosphere. Continuous observations from GNSS receivers provide an excellent tool for studying the neutral atmosphere, currently in near real-time. The Near Real-Time (NRT) neutral atmosphere and water vapour distribution models are currently obtained with high resolution from Ground Base Augmentation Systems (GBAS), where reference stations are equipped with GNSS and meteorological sensors. The Poland territory is covered by dense network of GNSS stations in the frame of GBAS system called ASG-EUPOS (www.asgeupos.pl). This system was established in year 2008 by the Head Office of Geodesy and Cartography in the frame of the EUPOS project (www.eupos.org) for providing positioning services. The GNSS data are available from 130 reference stations located in Poland and neighbour countries. The ground meteorological observations in the area of Poland and neighbour countries are available from ASG-EUPOS stations included in EUREF Permanent Network (EPN) stations, airports meteorological stations (METAR messages stations), and stations managed by national Institute of Meteorology and Water Management (SYNOP messages stations). Institute of Geodesy and Geoinformatics (IGG) of Wroclaw University of Environmental and Life Sciences had created permanent NRT service of ZTD (Zenith Total Delay) estimation for the area of Poland from GPS observations called IGGHZG. The first part of the paper presents the methodology of NRT GNSS data processing for ASG-EUPOS stations for ZTD estimation and its comparison to the results coming from EPN ACs and Military University of Technology in Warsaw AC (MUT AC). Second part covers the procedure of IWV (atmospheric Integrated Water Vapour content) estimation at IGG from IGGHZG product and ZHD (Zenith Hydrostatic Delay) derived from Saastamoinen formula (1972

  14. The Olkiluoto 3 project

    International Nuclear Information System (INIS)

    This series of slides presents the Olkiluoto 3 project involving the EPR (European Pressurized water Reactor). This EPR is the first reactor of third generation to have be put into construction. The contract was signed between the Areva-Siemens consortium and the Tvo Finn company in december 2003. The construction of the first-off reactor is always a big challenge but also opens the way for its industrial development as it brings knowledge and experience: Olkiluoto is the first international licensing of the EPR, a valuable feedback experience has been acquired on both the fabrication of the primary components and the qualification of the suppliers. A point on the state of the construction works is made at the first term 2009. (A.C.)

  15. Distributed energy resources in grid interactive AC microgrids

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Guerrero, Josep; Chen, Zhe;

    2010-01-01

    of future electrical power system. This paper gives an overview of DER units in the grid interactive ac microgrid. The options in structures and control methods of power electronics interfaced DER units are described. Instantaneous load sharing strategies among DER units in the islanded microgrid operations...

  16. Team-oriented Adaptive Droop Control for Autonomous AC Microgrids

    DEFF Research Database (Denmark)

    Shafiee, Qobad; Nasirian, Vahidreza; Guerrero, Josep M.;

    2014-01-01

    This paper proposes a distributed control strategy for voltage and reactive power regulation in ac Microgrids. First, the control module introduces a voltage regulator that maintains the average voltage of the system on the rated value, keeping all bus voltages within an acceptable range. Dynamic...

  17. Soliton ratchetlike dynamics by ac forces with harmonic mixing

    DEFF Research Database (Denmark)

    Salerno, Mario; Zolotaryuk, Yaroslav

    2002-01-01

    The possibility of unidirectional motion of a kink (topological soliton) of a dissipative sine-Gordon equation in the presence of ac forces with harmonic mixing (at least biharmonic) and of zero mean, is presented. The dependence of the kink mean velocity on system parameters is investigated...

  18. Stretched exponential relaxation and ac universality in disordered dielectrics

    DEFF Research Database (Denmark)

    Milovanov, Alexander V.; Rypdal, Kristoffer; Juul Rasmussen, Jens

    2007-01-01

    This paper is concerned with the connection between the properties of dielectric relaxation and alternating-current (ac) conduction in disordered dielectrics. The discussion is divided between the classical linear-response theory and a self-consistent dynamical modeling. The key issues are stretc......This paper is concerned with the connection between the properties of dielectric relaxation and alternating-current (ac) conduction in disordered dielectrics. The discussion is divided between the classical linear-response theory and a self-consistent dynamical modeling. The key issues...... are stretched exponential character of dielectric relaxation, power-law power spectral density, and anomalous dependence of ac conduction coefficient on frequency. We propose a self-consistent model of dielectric relaxation in which the relaxations are described by a stretched exponential decay function....... Mathematically, our study refers to the expanding area of fractional calculus and we propose a systematic derivation of the fractional relaxation and fractional diffusion equations from the property of ac universality....

  19. Current Control of Grid Converters Connected with Series AC Capacitor

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Blaabjerg, Frede; Loh, Poh Chiang;

    2015-01-01

    The series ac capacitor has recently been used with the transformerless grid-connected converters in the distribution power grids. The capacitive characteristic of the resulting series LC filter restricts the use of conventional synchronous integral or stationary resonant current controllers. Thus...

  20. Calculation of AC losses in large HTS stacks and coils

    DEFF Research Database (Denmark)

    Zermeno, Victor; Abrahamsen, Asger Bech; Mijatovic, Nenad;

    2012-01-01

    In this work, we present a homogenization method to model a stack of HTS tapes under AC applied transport current or magnetic field. The idea is to find an anisotropic bulk equivalent for the stack of tapes, where the internal alternating structures of insulating, metallic, superconducting...

  1. Measurement of AC losses in different former materials

    DEFF Research Database (Denmark)

    Olsen, Søren Krüger; Træholt, Chresten; Kühle, Anders Van Der Aa;

    1998-01-01

    A high temperature superconducting cable may be based on a centrally located cylindrical support, a so-called former. If electrically conductive, the former can contribute to the AC losses through eddy current losses caused by unbalanced axial and tangential magnetic fields. With these measurements...

  2. Equivalent Circuits For AC-Impedance Analysis Of Corrosion

    Science.gov (United States)

    Danford, M. D.

    1992-01-01

    Report presents investigation of equivalent circuits for ac-impedance analysis of corrosion. Impedance between specimen and electrolyte measured as function of frequency. Data used to characterize corrosion electrochemical system in terms of equivalent circuit. Eleven resistor/capacitor equivalent-circuit models were analyzed.

  3. Security analysis of interconnected AC/DC systems

    DEFF Research Database (Denmark)

    Eriksson, Robert

    2015-01-01

    This paper analyses N-1 security in an interconnected ac/dc transmission system using power transfer distribution factors (PTDFs). In the case of a dc converter outage the power needs to be redistributed among the remaining converter to maintain power balance and operation of the dc grid. The red...

  4. Direct Experimental Observation of a Practical AC Zeeman Force

    Science.gov (United States)

    Fancher, Charles; Pyle, Andrew; Rotunno, Andrew; Du, Shuangli; Aubin, Seth

    2016-05-01

    We present measurements of the spin-dependent AC Zeeman force produced by microwave magnetic near-field gradients on an atom chip. We measure the AC Zeeman force on ultracold 87 Rb atoms by observing its effect on the motion of atoms in free-fall and on those confined in a trap. We have studied the force as a function of microwave frequency detuning from a hyperfine transition at 6.8 GHz at several magnetic field strengths and have observed its characteristic bipolar and resonant features predicted by two-level dressed atom theory. We find that the force is several times the strength of gravity in our setup, and that it can be targeted to a specific hyperfine transition while leaving other hyperfine states and transitions relatively unaffected. We find that our measurements are reasonably consistent with theory and are working towards a parameter-free comparison. AC Zeeman potentials offer the possibility of targeting qualitatively different trapping potentials to different spin states, a capability currently absent from the toolbox of atomic quantum control techniques. In particular, an AC Zeeman potential could be used as the beamsplitter for a spin-dependent atom interferometer or for engineering a quantum gate. Work supported by AFOSR and W&M, and in part by AFRL.

  5. Introducing AC Inductive Reactance with a Power Tool

    Science.gov (United States)

    Bryant, Wesley; Baker, Blane

    2016-01-01

    The concept of reactance in AC electrical circuits is often non-intuitive and difficult for students to grasp. In order to address this lack of conceptual understanding, classroom exercises compare the predicted resistance of a power tool, based on electrical specifications, to measured resistance. Once students discover that measured resistance…

  6. Rethinking Rectification: AC-DC Power Supply in Package

    DEFF Research Database (Denmark)

    Pejtersen, Jens; Knott, Arnold; Jørgensen, Ivan Harald Holger

    Rectification of AC mains voltage is almost exclusively implemented with passive diode bridge rectifiers for power applications below 100 W. The diode bridge rectifier is reliable, cost effective and easy to use. But it is also lossy, nonlinear and passive. Thus reducing the power conversion...

  7. Dielectric relaxation and ac conductivity of sodium tungsten phosphate glasses

    Indian Academy of Sciences (India)

    B Singh; P S Tarsikka; L Singh

    2002-10-01

    Studies of dielectric relaxation and ac conductivity have been made on three samples of sodium tungsten phosphate glasses over a temperature range of 77–420 K. Complex relative permittivity data have been analyzed using dielectric modulus approach. Conductivity relaxation frequency increases with the increase of temperature. Activation energy for conductivity relaxation has also been evaluated. Measured ac conductivity (m()) has been found to be higher than dc at low temperatures whereas at high temperature m() becomes equal to dc at all frequencies. The ac conductivity obeys the relation ac() = A over a considerable range of low temperatures. Values of exponent are nearly equal to unity at about 78 K and the values decrease non-linearly with the increase of temperature. Values of the number density of states at Fermi level ((F)) have been evaluated at 80 K assuming values of electron wave function decay constant to be 0.5 (Å)-1. Values of (F) have the order 1020 which are well within the range suggested for localized states. Present values of (F) are smaller than those for tungsten phosphate glasses.

  8. Evolution of ac conductivity in nonequilibrium warm dense gold

    International Nuclear Information System (INIS)

    Using a chirped pulse probe technique, we have obtained single-shot measurements of temporal evolution of ac conductivity at 1.55 eV (800 nm) during electron energy relaxation in nonequilibrium warm dense gold with energy densities up to 4.1 MJ/kg (8*1010 J/m3). The results uncover important changes that have been masked in an earlier experiment. Equally significant, they provide valuable tests of an ab initio model for the calculation of electron heat capacity, electron-ion coupling, and ac conductivity in a single, first principles framework. While measurements of the real part of ac conductivity corroborate our theoretical temperature-dependent electron heat capacity, they point to an electron-ion coupling factor of 2.2*1016 W/m3K, significantly below that predicted by theory. In addition, measurements of the imaginary part of ac conductivity reveal the need to improve theoretical treatment of intraband contributions at very low photon energy. (authors)

  9. Combined AC electroosmosis and dielectrophoresis for controlled rotation of microparticles.

    Science.gov (United States)

    Walid Rezanoor, Md; Dutta, Prashanta

    2016-03-01

    Electrorotation is widely used for characterization of biological cells and materials using a rotating electric field. Generally, multiphase AC electric fields and quadrupolar electrode configuration are needed to create a rotating electric field for electrorotation. In this study, we demonstrate a simple method to rotate dielectrophoretically trapped microparticles using a stationary AC electric field. Coplanar interdigitated electrodes are used to create a linearly polarized nonuniform AC electric field. This nonuniform electric field is employed for dielectrophoretic trapping of microparticles as well as for generating electroosmotic flow in the vicinity of the electrodes resulting in rotation of microparticles in a microfluidic device. The rotation of barium titanate microparticles is observed in 2-propanol and methanol solvent at a frequency below 1 kHz. A particle rotation rate as high as 240 revolutions per minute is observed. It is demonstrated that precise manipulation (both rotation rate and equilibrium position) of the particles is possible by controlling the frequency of the applied electric field. At low frequency range, the equilibrium positions of the microparticles are observed between the electrode edge and electrode center. This method of particle manipulation is different from electrorotation as it uses induced AC electroosmosis instead of electric torque as in the case of electrorotation. Moreover, it has been shown that a microparticle can be rotated along its own axis without any translational motion. PMID:27014394

  10. Heat Transfer Analysis for Industrial AC Electric Arc Furnace

    Institute of Scientific and Technical Information of China (English)

    (U)nal (C)amdali; Murat Tun(c)

    2005-01-01

    The heat transfer analysis was performed for an AC electric arc furnace (EAF). Heat losses by conduction, convection and radiation from outer surface, roof, bottom and electrodes of EAF were determined in detail. Some suggestions about decreasing heat losses were presented.

  11. Acústica, fluidos y termodinámica

    OpenAIRE

    Beléndez Vázquez, Augusto

    1992-01-01

    Acústica. Estática de fluidos. Dinámica de fluidos y fluidos reales. Temperatura y propagación del calor. Primer principio de la Termodinámica. Gases ideales. Segundo principio de la Termodinámica.

  12. Exchange anisotropy determined by magnetic field dependence of ac susceptibility

    Science.gov (United States)

    Rodríguez-Suárez, R. L.; Vilela Leão, L. H.; de Aguiar, F. M.; Rezende, S. M.; Azevedo, A.

    2003-10-01

    ac susceptibility measurements of ferromagnetic/antiferromagnetic (FM/AF) bilayers are usually performed as a function of the temperature. In this work we describe measurements of transverse biased ac susceptibility (χt) of FM/AF bilayers as a function of the applied magnetic field H0. The measurements were carried out at room temperature by means of an ac magneto-optical Kerr effect susceptometer. The χt-1(H0) dependence, at the saturation magnetization regime, exhibits a linear behavior with the applied field parallel and perpendicular to the exchange bias direction. The linear extrapolation of χt-1 versus H0 cuts the abscissa at asymmetrical values of field due to the exchange bias coupling. The inverse susceptibility is calculated in the saturation regime by a model, which takes into account the free energy of both layers plus a term corresponding to the interfacial coupling. The exchange coupling field (HE) and uniaxial anisotropy (HU) are extracted from the best fit to the experimental results. The results obtained are crosschecked by those obtained from ferromagnetic resonance (FMR) and dc magnetometry. The measurements of the exchange bias and the uniaxial field in all of the three analyzed bilayers gave values that are consistently lower when measured by FMR than those obtained by ac and dc magnetometry. It is argued that the apparently discrepant values of HE and HU, obtained by different techniques, might be explained by existence of unstable AF grains at the AF/FM interface.

  13. A simple technique for a.c. conductivity measurements

    Indian Academy of Sciences (India)

    R Padma Suvarna; K Raghavendra Rao; K Subbarangaiah

    2002-12-01

    An inexpensive, indigenous and a simple electronic instrument based on voltage follower, current–to–voltage converter, zero crossing detector and a phase detector has been developed for measurement of a.c. conductivity. Real and imaginary parts of complex impedance are determined for a given sample as a function of frequency and the given sample is represented by a pure electronic model.

  14. Container-component model and XML in ALMA ACS

    Science.gov (United States)

    Sommer, Heiko; Chiozzi, Gianluca; Zagar, Klemen; Voelter, Markus

    2004-09-01

    ALMA software, from high-level data flow applications down to instrument control, is built using the ACS framework. To meet the challenges of developing distributed software in distributed teams, ACS offers a container/component model that integrates the use of XML transfer objects. ACS containers are built on top of CORBA and are available for C++, Java, and Python, so that ALMA software can be written as components in any of these languages. The containers perform technical aspects of the software system, while components can focus on the implementation of functional requirements. Like Web services, components can use XML to exchange structured data by value. For Java components, the container seamlessly integrates the use of XML binding classes, which are Java classes that encapsulate access to XML data through type-safe methods. Binding classes are generated from XML schemas, allowing the Java compiler to enforce compliance of application code with the XML schemas. This presentation will explain the capabilities of the ACS container/component model, and how it relates to other middleware technologies that are popular in industry.

  15. On Conformal Field Theories With Extremal a/c Values

    CERN Document Server

    Zhiboedov, Alexander

    2013-01-01

    Unitary conformal field theories (CFTs) are believed to have positive (non-negative) energy correlators. Energy correlators are universal observables in higher-dimensional CFTs built out of integrated Wightman functions of the stress-energy tensor. We analyze energy correlators in parity invariant four-dimensional CFTs. The goal is to use the positivity of energy correlators to further constrain unitary CFTs. It is known that the positivity of the simplest one-point energy correlator implies that 1/3 <= a/c <= 31/18 where a and c are the Weyl anomaly coefficients. We use the positivity of higher point energy correlators to show that CFTs with extremal values of a/c have trivial scattering observables. More precisely, for a/c=1/3 and a/c=31/18 all energy correlators are fixed to be the ones of the free boson and the free vector theory correspondingly. Similarly, we show that the positivity and finiteness of energy correlators together imply that the three-point function of the stress tensor in a CFT cann...

  16. Conductivity measurements with trapezoidal a.c. magnetic fields

    NARCIS (Netherlands)

    Gijsbertse, E.A.; Klundert, van de L.J.M.

    1981-01-01

    The inductive response of normal metals to trapezoidal a.c. fields is studied theoretically as well as experimentally. A method is presented to determine the conductivity and its magnetic induction dependence from the decay of the induced voltage during periods of constant field. The correctness of

  17. 78 FR 42567 - ACS Wireless, Inc.; Notice of Application

    Science.gov (United States)

    2013-07-16

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION ACS Wireless, Inc.; Notice of Application June 25, 2013. Correction In notice document 2013-15658 beginning on page 39345 in the issue of Monday, July 1, 2013, make the following correction: On page...

  18. Development project of small accelerator

    CERN Document Server

    Yamada, S

    2002-01-01

    The object of this project is demonstration of a small proton and heavy ion synchrotron and a small hard X-ray photon radiation source by using new technology and application of them to therapy, diagnosis, material science and life science. In this paper, a part of small proton and heavy ion synchrotron is discussed. Nine organizations joined in this project. There are four development themes such as optimization of laser-ion 100 TW class source target, beam storage and cooling device, small synchrotron ring and FFAG accelerator. Outline and contents of development of them are explained. This project is planning to generate a few MeV/u carbon ions in fully ionized states by impact of laser with about 100 TW output. 3 T maximum bending magnetic field using normal conduction AC magnet will be actualized for synchrotron with 200 MeV proton beam. (S.Y.)

  19. Context based computational analysis and characterization of ARS consensus sequences (ACS) of Saccharomyces cerevisiae genome.

    Science.gov (United States)

    Singh, Vinod Kumar; Krishnamachari, Annangarachari

    2016-09-01

    Genome-wide experimental studies in Saccharomyces cerevisiae reveal that autonomous replicating sequence (ARS) requires an essential consensus sequence (ACS) for replication activity. Computational studies identified thousands of ACS like patterns in the genome. However, only a few hundreds of these sites act as replicating sites and the rest are considered as dormant or evolving sites. In a bid to understand the sequence makeup of replication sites, a content and context-based analysis was performed on a set of replicating ACS sequences that binds to origin-recognition complex (ORC) denoted as ORC-ACS and non-replicating ACS sequences (nrACS), that are not bound by ORC. In this study, DNA properties such as base composition, correlation, sequence dependent thermodynamic and DNA structural profiles, and their positions have been considered for characterizing ORC-ACS and nrACS. Analysis reveals that ORC-ACS depict marked differences in nucleotide composition and context features in its vicinity compared to nrACS. Interestingly, an A-rich motif was also discovered in ORC-ACS sequences within its nucleosome-free region. Profound changes in the conformational features, such as DNA helical twist, inclination angle and stacking energy between ORC-ACS and nrACS were observed. Distribution of ACS motifs in the non-coding segments points to the locations of ORC-ACS which are found far away from the adjacent gene start position compared to nrACS thereby enabling an accessible environment for ORC-proteins. Our attempt is novel in considering the contextual view of ACS and its flanking region along with nucleosome positioning in the S. cerevisiae genome and may be useful for any computational prediction scheme. PMID:27508123

  20. Context based computational analysis and characterization of ARS consensus sequences (ACS of Saccharomyces cerevisiae genome

    Directory of Open Access Journals (Sweden)

    Vinod Kumar Singh

    2016-09-01

    Full Text Available Genome-wide experimental studies in Saccharomyces cerevisiae reveal that autonomous replicating sequence (ARS requires an essential consensus sequence (ACS for replication activity. Computational studies identified thousands of ACS like patterns in the genome. However, only a few hundreds of these sites act as replicating sites and the rest are considered as dormant or evolving sites. In a bid to understand the sequence makeup of replication sites, a content and context-based analysis was performed on a set of replicating ACS sequences that binds to origin-recognition complex (ORC denoted as ORC-ACS and non-replicating ACS sequences (nrACS, that are not bound by ORC. In this study, DNA properties such as base composition, correlation, sequence dependent thermodynamic and DNA structural profiles, and their positions have been considered for characterizing ORC-ACS and nrACS. Analysis reveals that ORC-ACS depict marked differences in nucleotide composition and context features in its vicinity compared to nrACS. Interestingly, an A-rich motif was also discovered in ORC-ACS sequences within its nucleosome-free region. Profound changes in the conformational features, such as DNA helical twist, inclination angle and stacking energy between ORC-ACS and nrACS were observed. Distribution of ACS motifs in the non-coding segments points to the locations of ORC-ACS which are found far away from the adjacent gene start position compared to nrACS thereby enabling an accessible environment for ORC-proteins. Our attempt is novel in considering the contextual view of ACS and its flanking region along with nucleosome positioning in the S. cerevisiae genome and may be useful for any computational prediction scheme.

  1. Biocontrol activity of Paenibacillus polymyxa AC-1 against Pseudomonas syringae and its interaction with Arabidopsis thaliana.

    Science.gov (United States)

    Hong, Chi Eun; Kwon, Suk Yoon; Park, Jeong Mee

    2016-04-01

    Paenibacillus polymyxa AC-1 (AC-1) is a plant growth-promoting rhizobacterium (PGPR) that has been used as a soil inoculant for biocontrol of plant pathogenic fungi and to promote plant growth. In this study, we examine the effects of AC-1 on the bacterial phytopathogen Pseudomonas syringae and internal colonization of AC-1 by counting bacterial populations that colonize plants. AC-1 inhibited the growth of both P. syringae pv. tomato DC3000 (Pst) and P. syringae pv. tabaci (Pta) in a concentration-dependent manner in in vitro assays. Upon treatment of AC-1 dropping at root tip of axenically grown Arabidopsis, we found that most of the AC-1 was detected in interior of leaves of Arabidiopsis plants rather than roots after 5 days post infection, indicating systemic spreading of AC-1 occur. We examined further AC-1 colonization patterns in Arabidopsis mutants deficient in phytohormone signaling pathways. These results indicated that abscisic acid (ABA) and jasmonic acid (JA) signaling pathways positively and negatively contributed, respectively, to AC-1 colonization of leaves, whereas epiphytic accumulation of AC-1 around root tissues was not affected. This study shows that AC-1 is an effective biocontrol agent to suppress P. syringae growth, possibly owing to its colonization patterns as a leaf-inhabiting endophyte. The results showed in this work will help to expand our understanding of the mode of action of AC-1 as a biological control agent and consequently, its application in agriculture.

  2. Expression and immunocytochemical analysis of Autographa californica nucleopolyhedrovirus (AcMNPV) orf74 gene

    Institute of Scientific and Technical Information of China (English)

    SHI-HENG AN; ZHONG-JIANG GUO; XIN-MING YIN

    2006-01-01

    Autographa californica nucleopolyhedrovirus orf74 (Ac74) is located between 62 311 and 63 108bp in the AcMNPV genome, which encodes 265 amino acid residues with a predicted 31 kDa molecular weight. The homologues of Ac74 were searched using BLASTP in protein databases, GenBank/EMBL and SWISS-PROT. The result revealed that deduced Ac74 protein was homologous to the predicted products from 10 lepidoptera NPV ORFs. The multiple sequence alignments of Ac74 and its 10 homologues manifested only one amino acid residue was completely conserved. The transcript analysis revealed that the transcript of Ac74 was detected from 24-72 hours post-infection (hpi). The product of Ac74was detected at 24 hpi and lasted until 72 bpi by Western blot using anti-Ac74 antiserum,consistent with reverse transcriptase polymerase chain reaction results. These results suggested Ac74 was expressed during the later stages of infection. The product of Ac74 was 31 kDa in size, consistent with predicted molecular weight. The subcellular localization of Ac74 proteins manifested Ac74 protein in the cytoplasm, and was hardly present in the nucleus at 24 bpi. The fluorescence was also observed in polyhedra, except cytoplasm at 72hpi. Together, Ac74 is a functional protein with 31kDa molecular weight and is located in the cytoplasm and the polyhedra.

  3. Biocontrol activity of Paenibacillus polymyxa AC-1 against Pseudomonas syringae and its interaction with Arabidopsis thaliana.

    Science.gov (United States)

    Hong, Chi Eun; Kwon, Suk Yoon; Park, Jeong Mee

    2016-04-01

    Paenibacillus polymyxa AC-1 (AC-1) is a plant growth-promoting rhizobacterium (PGPR) that has been used as a soil inoculant for biocontrol of plant pathogenic fungi and to promote plant growth. In this study, we examine the effects of AC-1 on the bacterial phytopathogen Pseudomonas syringae and internal colonization of AC-1 by counting bacterial populations that colonize plants. AC-1 inhibited the growth of both P. syringae pv. tomato DC3000 (Pst) and P. syringae pv. tabaci (Pta) in a concentration-dependent manner in in vitro assays. Upon treatment of AC-1 dropping at root tip of axenically grown Arabidopsis, we found that most of the AC-1 was detected in interior of leaves of Arabidiopsis plants rather than roots after 5 days post infection, indicating systemic spreading of AC-1 occur. We examined further AC-1 colonization patterns in Arabidopsis mutants deficient in phytohormone signaling pathways. These results indicated that abscisic acid (ABA) and jasmonic acid (JA) signaling pathways positively and negatively contributed, respectively, to AC-1 colonization of leaves, whereas epiphytic accumulation of AC-1 around root tissues was not affected. This study shows that AC-1 is an effective biocontrol agent to suppress P. syringae growth, possibly owing to its colonization patterns as a leaf-inhabiting endophyte. The results showed in this work will help to expand our understanding of the mode of action of AC-1 as a biological control agent and consequently, its application in agriculture. PMID:26946374

  4. NOVEL CONTROL STRATEGIES FOR PARALLEL-CONNECTED INVERTERS IN AC MICROGRIDS

    DEFF Research Database (Denmark)

    Guan, Yajuan

    2016-01-01

    strategy for paralleled voltage-controlled inverters (VCIs) in AC MGs to provide faster transient response, better active/reactive power decoupling sharing, and wider application ranges for different line impedances than the conventional power droop controller. And then, develop a complete small...... proposed control strategy provides instantaneous and independent direct and quadrature currents sharing for paralleled VCIs. In contrast with the conventional droop control, there is no need to calculate active/reactive power. An integrated small-signal state-space model for the two parallel VCIs with the...... has been commonly adopted in the last decade as the decentralized control in MGs. However, this approach has several inherent drawbacks, such as slow dynamic response, active/reactive power coupling, and sensitivity to line impedance. This project proposes a novel autonomous current sharing control...

  5. Solid-state fast voltage compensator for pulsed power applications requiring constant AC power consumption

    CERN Document Server

    Magallanes, Francisco Cabaleiro; Viarouge, Philippe; Cros, Jérôme

    2015-01-01

    This paper proposes a novel topological solution for pulsed power converters based on capacitor-discharge topologies, integrating a Fast Voltage Compensator which allows an operation at constant power consumption from the utility grid. This solution has been retained as a possible candidate for the CLIC project under study at CERN, which requires more than a thousand synchronously-operated klystron modulators producing a total pulsed power of almost 40 GW. The proposed Fast Voltage Compensator is integrated in the modulator such that it only has to treat the capacitor charger current and a fraction of the charging voltage, meaning that its dimensioning power and cost are minimized. This topology can be used to improve the AC power quality of any pulsed converters based on capacitor-discharge concept. A prototype has been built and exploited to validate the operating principle and demonstrate the benefits of the proposed solution.

  6. Aragonite coating solutions (ACS) based on artificial seawater

    International Nuclear Information System (INIS)

    Graphical abstract: - Highlights: • Developed completely inorganic solutions for the deposition of monolayers of aragonite spherules (or ooids). • Solutions mimicked the artificial seawater. • Biomimetic crystallization was performed at the tropical sea surface temperature of 30 °C. - Abstract: Aragonite (CaCO3, calcium carbonate) is an abundant biomaterial of marine life. It is the dominant inorganic phase of coral reefs, mollusc bivalve shells and the stalactites or stalagmites of geological sediments. Inorganic and initially precipitate-free aragonite coating solutions (ACS) of pH 7.4 were developed in this study to deposit monolayers of aragonite spherules or ooids on biomaterial (e.g., UHMWPE, ultrahigh molecular weight polyethylene) surfaces soaked in ACS at 30 °C. The ACS solutions of this study have been developed for the surface engineering of synthetic biomaterials. The abiotic ACS solutions, enriched with calcium and bicarbonate ions at different concentrations, essentially mimicked the artificial seawater composition and started to deposit aragonite after a long (4 h) incubation period at the tropical sea surface temperature of 30 °C. While numerous techniques for the solution deposition of calcium hydroxyapatite (Ca10(PO4)6(OH)2), of low thermodynamic solubility, on synthetic biomaterials have been demonstrated, procedures related to the solution-based surface deposition of high solubility aragonite remained uncommon. Monolayers of aragonite ooids deposited at 30 °C on UHMWPE substrates soaked in organic-free ACS solutions were found to possess nano-structures similar to the mortar-and-brick-type botryoids observed in biogenic marine shells. Samples were characterized using SEM, XRD, FTIR, ICP-AES and contact angle goniometry

  7. Aragonite coating solutions (ACS) based on artificial seawater

    Energy Technology Data Exchange (ETDEWEB)

    Tas, A. Cuneyt, E-mail: c_tas@hotmail.com

    2015-03-01

    Graphical abstract: - Highlights: • Developed completely inorganic solutions for the deposition of monolayers of aragonite spherules (or ooids). • Solutions mimicked the artificial seawater. • Biomimetic crystallization was performed at the tropical sea surface temperature of 30 °C. - Abstract: Aragonite (CaCO{sub 3}, calcium carbonate) is an abundant biomaterial of marine life. It is the dominant inorganic phase of coral reefs, mollusc bivalve shells and the stalactites or stalagmites of geological sediments. Inorganic and initially precipitate-free aragonite coating solutions (ACS) of pH 7.4 were developed in this study to deposit monolayers of aragonite spherules or ooids on biomaterial (e.g., UHMWPE, ultrahigh molecular weight polyethylene) surfaces soaked in ACS at 30 °C. The ACS solutions of this study have been developed for the surface engineering of synthetic biomaterials. The abiotic ACS solutions, enriched with calcium and bicarbonate ions at different concentrations, essentially mimicked the artificial seawater composition and started to deposit aragonite after a long (4 h) incubation period at the tropical sea surface temperature of 30 °C. While numerous techniques for the solution deposition of calcium hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}), of low thermodynamic solubility, on synthetic biomaterials have been demonstrated, procedures related to the solution-based surface deposition of high solubility aragonite remained uncommon. Monolayers of aragonite ooids deposited at 30 °C on UHMWPE substrates soaked in organic-free ACS solutions were found to possess nano-structures similar to the mortar-and-brick-type botryoids observed in biogenic marine shells. Samples were characterized using SEM, XRD, FTIR, ICP-AES and contact angle goniometry.

  8. Intending Projects

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Project name: 90,000t/a BR device and auxiliary projects Construction unit: Sinopec Beijing Yanshan Petrochemical Company Total investment: 2.257 billion yuan Project description: It will cover an area of 14. lha.

  9. 多元组合ACS-TSP系统%A Multi-Metaheuristic Combined ACS-TSP System

    Institute of Scientific and Technical Information of China (English)

    陈芳

    2015-01-01

    文章提出了用多算法结合蚁族系统(ACS)求解旅行商问题(TSP)的方法,介绍了在ACS-TSP问题上的遗传算法,目的是为了寻找处理旅行商早期停滞现象的解空间.此外,还提出了一种新的最小生成树(MST)算法,结合最近邻(NN)来创建一个初始架构,以便又快又好地解决旅行商问题.%This paper presents a Multi-Metaheuristic combined Ant Colony System (ACS)-Travelling Salesman Problem (TSP) al-gorithm for solving the TSP. We introduce genetic algorithm in ACS-TSP to search solutions space for dealing with the early stagnation problem of the traveling salesman problem. Moreover, we present a new strategy of Minimum Spanning Tree(MST) coupled with Nearest Neighbor(NN) to construct a initial tour for improving TSP thus obtaining good solutions quickly. According to our simulation results, the new algorithm can provide a significant improvement for obtaining a global optimum solution or a near global optimum solution in large TSPs.

  10. Expression characteristics of CS-ACS1, CS-ACS2 and CS-ACS3, three members of the 1-aminocyclopropane-1-carboxylate synthase gene family in cucumber (Cucumis sativus L.) fruit under carbon dioxide stress.

    Science.gov (United States)

    Mathooko, F M; Mwaniki, M W; Nakatsuka, A; Shiomi, S; Kubo, Y; Inaba, A; Nakamura, R

    1999-02-01

    We investigated the expression pattern of three 1-aminocyclopropane-1-carboxylate (ACC) synthase genes, CS-ACS1, CS-ACS2 and CS-ACS3 in cucumber (Cucumis sativus L.) fruit under CO2 stress. CO2 stress-induced ethylene production paralleled the accumulation of only CS-ACS1 transcripts which disappeared upon withdrawal of CO2. Cycloheximide inhibited the CO2 stress-induced ethylene production but superinduced the accumulation of CS-ACS1 transcript. At higher concentrations, cycloheximide also induced the accumulation of CS-ACS2 and CS-ACS3 transcripts. In the presence of CO2 and cycloheximide, the accumulation of CS-ACS2 transcript occurred within 1 h, disappeared after 3 h and increased greatly upon withdrawal of CO2. Inhibitors of protein kinase and types 1 and 2A protein phosphatases which inhibited and stimulated, respectively, CO2 stress-induced ethylene production had little effect on the expression of these genes. The results presented here identify CS-ACS1 as the main ACC synthase gene responsible for the increased ethylene biosynthesis in cucumber fruit under CO2 stress and suggest that this gene is a primary response gene and its expression is under negative control since it is expressed by treatment with cycloheximide. The results further suggest that the regulation of CO2 stress-induced ethylene biosynthesis by reversible protein phosphorylation does not result from enhanced ACC synthase transcription. PMID:10202812

  11. Recent applications of AC electrokinetics in biomolecular analysis on microfluidic devices.

    Science.gov (United States)

    Sasaki, Naoki

    2012-01-01

    AC electrokinetics is a generic term that refers to an induced motion of particles and fluids under nonuniform AC electric fields. The AC electric fields are formed by application of AC voltages to microelectrodes, which can be easily integrated into microfluidic devices by standard microfabrication techniques. Moreover, the magnitude of the motion is large enough to control the mass transfer on the devices. These advantages are attractive for biomolecular analysis on the microfluidic devices, in which the characteristics of small space and microfluidics have been mainly employed. In this review, I describe recent applications of AC electrokinetics in biomolecular analysis on microfluidic devices. The applications include fluid pumping and mixing by AC electrokinetic flow, and manipulation of biomolecules such as DNA and proteins by various AC electrokinetic techniques. Future prospects for highly functional biomolecular analysis on microfluidic devices with the aid of AC electrokinetics are also discussed.

  12. A Study on Power Quality Improvement in PWM Controlled AC Voltage Controller

    Directory of Open Access Journals (Sweden)

    Ahmet ALTINTAŞ

    2009-04-01

    Full Text Available A lot of topologies of pulse-width modulated (PWM-AC controllers for single-phase and three-phase systems are proposed up to date. PWM-AC controllers have important advantages compared with the phase-controlled AC controllers using thyristors and triacs. The PWM-AC controller has sinusoidal current waveforms, smaller THD values, better power factor, faster dynamics, and smaller input/output filter. This article presents a novel control technique for application to PWM-AC controllers with ability of generating fewer harmonics. In the proposed control method, both the traditional AC voltage controllers and the PWM-AC controllers are combined; and smaller THD values are obtained. Thus, the harmonic pollution in the power system will be reduced; and consequently, the power quality will be increased. For this purpose, computer simulations are performed in order to investigate the proposed controller performance. The obtained results are compared with the conventional PWM-AC controller.

  13. Transposition of Ac from the P Locus of Maize into Unreplicated Chromosomal Sites

    OpenAIRE

    Chen, Jychian; Greenblatt, Irwin M.; Dellaporta, Stephen L.

    1987-01-01

    We have analyzed donor and target sites of the mobile element Activator (Ac) that are altered as a result of somatic transposition from the P locus in maize. Previous genetic analysis has indicated that the two mitotic daughter lineages which result from Ac transposition from P differ in their Ac constitution at the P locus. Both lineages, however, usually contain transposed Ac elements which map to the same genetic position. Using methylation-sensitive restriction enzymes and genomic blot a...

  14. A transgenic system for generation of transposon Ac/Ds-induced chromosome rearrangements in rice

    OpenAIRE

    Yu, Chuanhe; Han, FangPu; Zhang, Jianbo; Birchler, James; Peterson, Thomas

    2012-01-01

    The maize Activator (Ac)/Dissociation (Ds) transposable element system has been used in a variety of plants for insertional mutagenesis. Ac/Ds elements can also generate genome rearrangements via alternative transposition reactions which involve the termini of closely linked transposons. Here, we introduced a transgene containing reverse-oriented Ac/Ds termini together with an Ac transposase gene into rice (Oryza sativa ssp. japonica cv. Nipponbare). Among the transgenic progeny, we identifie...

  15. Scaling of ac susceptibility and the nonlinear response function of high-temperature superconductors

    Institute of Scientific and Technical Information of China (English)

    CHEN; Kaixuan; NING; Zhenhua; XU; Hengyi; QI; Zhi; LU; Guo

    2005-01-01

    The amplitude-dependent ac susceptibility of high-temperature superconductors is shown to obey some empirical scaling relations. We try to analyze this behavior by extending a dc nonlinear response function of mixed state to the ac cases. The derived equations for critical current and ac susceptibility x(T) agree with the scaling relations of experimental data.

  16. 21 CFR 880.5510 - Non-AC-powered patient lift.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Non-AC-powered patient lift. 880.5510 Section 880.5510 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Devices § 880.5510 Non-AC-powered patient lift. (a) Identification. A non-AC-powered patient lift is...

  17. AC losses and transient field stability of PF-FSJS sample

    International Nuclear Information System (INIS)

    This series of 17 slides deals with AC losses and transient field stability of poloidal field full-size-joint sample) which is relevant to the poloidal field coils of ITER. The topic is divided into 6 parts: 1) general - AC losses, 2) conductor magnetization, 3) conductor calorimetry, 4) conclusion on AC losses, 5) stability, and 6) conclusion on stability

  18. AC losses and transient field stability of PF-FSJS sample

    Energy Technology Data Exchange (ETDEWEB)

    Zani, L

    2003-07-01

    This series of 17 slides deals with AC losses and transient field stability of poloidal field full-size-joint sample) which is relevant to the poloidal field coils of ITER. The topic is divided into 6 parts: 1) general - AC losses, 2) conductor magnetization, 3) conductor calorimetry, 4) conclusion on AC losses, 5) stability, and 6) conclusion on stability.

  19. 21 CFR 880.5100 - AC-powered adjustable hospital bed.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false AC-powered adjustable hospital bed. 880.5100... Therapeutic Devices § 880.5100 AC-powered adjustable hospital bed. (a) Identification. An AC-powered adjustable hospital bed is a device intended for medical purposes that consists of a bed with a...

  20. Examining the Effects of Introducing Online Access to ACS Journals at Primarily Undergraduate Institutions

    Science.gov (United States)

    Landolt, R. G.

    2007-01-01

    In collaboration with the Publications Division of the American Chemical Society (ACS), students and faculty at 24 primarily undergraduate institutions were provided online access to ACS primary research journals for a period of 18 months, and a group of eight schools were granted access to use the archives of ACS journals for a year. Resources…

  1. File list: His.PSC.50.H3ac.AllCell [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.H3ac.AllCell mm9 Histone H3ac Pluripotent stem cell SRX882861,SRX882864,...SRX882865,SRX882862,SRX882860,SRX882863 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.50.H3ac.AllCell.bed ...

  2. AC-13混合料矿料级配及特性试验研究%Research on AC-13 mixture mineral materials gradation and feature experiments

    Institute of Scientific and Technical Information of China (English)

    何亦伟

    2016-01-01

    The paper adopts the Marshall method and Superpave method,undertakes the mixture design for AC-13Ⅰand AC-13,compares and analyzes the optimal asphalt volume and compaction features of the two,and points out the designed asphalt volumes has the same optimal asphalt and aggregate ratio,and the latter is superior to the former one in the aspect of compaction.%应用马歇尔法和Superpave法对AC-13Ⅰ和AC-13进行了混合料设计,对比分析了两者的最佳沥青用量及压实特性,指出两者的设计沥青用量在最佳油石比时基本相同,AC-13的压实特性优于AC-13Ⅰ.

  3. Project Management

    DEFF Research Database (Denmark)

    Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015.......Project Management Theory Meets Practice contains the proceedings from the 1st Danish Project Management Research Conference (DAPMARC 2015), held in Copenhagen, Denmark, on May 21st, 2015....

  4. Russian contribution to ExoMars Trace Gas Orbiter: Atmospheric Chemistry Suite (ACS)

    Science.gov (United States)

    Shakun, Alexey; Korablev, Oleg; Trokhimovskiy, Alexander; Grigoriev, Alexey; Anufreychik, Konstantin; Fedorova, Anna; Ignatiev, Nikolay; Ivanov, Yuriy; Moshkin, Boris; Kalinnikov, Yuriy; Montmessin, Franck

    2016-04-01

    Atmospheric Chemistry Suite (ACS) is a part of science payload of Trace Gas Orbiter (TGO), ExoMars mission. This project developed by European Space Agency (ESA) in collaboration with Russian Space Agency (Roscosmos). Russian contribution to ExoMars TGO is the Proton rocket and two science instruments ACS (three infrared spectrometers) and FREND (neutron detector). ACS consists of three infrared spectrometers (ACS/NIR, ACS/MIR and ACS/TIRVIM) capable to take spectral measurements from near to thermal infrared range simultaneously or separately. Spectrometric channels of ACS share common mechanical, electrical, and thermal interfaces. Electronic box (ACS/BE) provides to spectrometric channels power and data transfer interfaces. SpaceWire link is used for science data transfer and MIL-1553 link - for commanding and housekeeping data transfer. The NIR channel is an echelle spectrometer with acousto-optic tunable filter (AOTF) for the selection of diffraction orders. ACS NIR is capable to perform nadir and occultation observations. NIR covers the spectral range of 0.7-1.7 μm with resolving power of ~25000. NIR will perform unique for TGO instruments nightglow science (searching for O2, OH, NO nightglow emissions on Mars). From the 1.38 μm band NIR will do water vapour mapping in nadir and H2O vertical profiling in solar occultations. High resolution NIR measurements of 1.27 μm O2(a1Δg) dayglow will supply indirect ozone observations on the dayside on nadir. In solar occultation mode, the O2 vertical profiles will be measured from the surface (in case of low dust activity) to the 40 km altitude based on 0.76 μm absorption band. Together with MIR channel in solar occultation NIR will support the measurements of CO2 density profiles (based on 1.43 μm band) and aerosols characterization from 0.7 to 4 μm. The wide spectral range will allow not just determine aerosol particle sizes and density at different altitudes, but also distinguish between dust and ice particles

  5. Project Management

    DEFF Research Database (Denmark)

    Pilkington, Alan; Chai, Kah-Hin; Le, Yang

    2015-01-01

    This paper identifies the true coverage of PM theory through a bibliometric analysis of the International Journal of Project Management from 1996-2012. We identify six persistent research themes: project time management, project risk management, programme management, large-scale project management......, project success/failure and practitioner development. These differ from those presented in review and editorial articles in the literature. In addition, topics missing from the PM BOK: knowledge management project-based organization and project portfolio management have become more popular topics...

  6. Characterization of an Ac transposon system based on apt1-m1 (Ac) on the long arm of maize chromosome 9.

    Science.gov (United States)

    Wang, Fei; Li, Pengfei; Tang, Yuanping; Fan, Jun; Xu, Dabin; Guo, Shengming; Xu, Zhengkai; Song, Rentao

    2012-09-01

    Activator/Dissociation (Ac/Ds) transposable elements have been used in maize insertional mutagenesis as a complement to Mutator (Mu). In this study, to further improve the efficiency of the Ac/Ds mutagenesis system, we adopted apt1-m1 (Ac) on the long arm of chromosome 9 (9L) as a donor Ac to create an Ac insertion library. This system is based on the negative selection pressure against the donor Ac, and it was highly efficient for isolating new transposition events. We obtained 9,625 transposition events from 1083 F1 ears with an average transposition rate of 8.66 % (rates ranged from 1.11 to 29.73 %). We also adopted a modified PCR-based genome walking strategy to improve the efficiency of the new method for isolating transposon-flanking sequences. This method is more efficient than the Southern-based method that was used in previous studies. A validation step was developed to distinguish transposon tags derived from newly transposed Ac or Ds elements. Using this PCR-based method, we isolated 67 inheritable flanking sequences from the apt1-m1 (Ac) transposition library; of these, 51 were confirmed as tr-Ac-flanking sequences and 11 were tr-Ds-flanking sequences. Similar to other Ac donors from different loci, the apt1-m1 (Ac) system also exhibited a preference for short distance transposition. In this study, we have further improved the Ac mutagenesis system in maize for gene isolation and functional genomics studies.

  7. 单相AC/AC Buck变换器中双向开关四步换流策略的研究%Four-step switching strategy of the bidirectional switches in single-phase AC/AC Buck converter

    Institute of Scientific and Technical Information of China (English)

    曾松; 张波; 丘东元; 马化盛

    2007-01-01

    为解决双向开关在电力电子器件中的换流问题,可采用"四象限换流"的换流策略,即"四步换流".该方法根据电压的相对大小或电流的方向将两个双向开关之间的换流过程分为四步进行,有效地避免了换流过程中的故障,实现了真正意义上的安全换流.本文以单相AC/AC Buck变换器为例,研究其中双向开关的四步换流控制策略,设计出具体的实现电路,并用实验加以验证.

  8. On-Chip AC self-test controller

    Science.gov (United States)

    Flanagan, John D.; Herring, Jay R.; Lo, Tin-Chee

    2009-09-29

    A system for performing AC self-test on an integrated circuit that includes a system clock for normal operation is provided. The system includes the system clock, self-test circuitry, a first and second test register to capture and launch test data in response to a sequence of data pulses, and a logic circuit to be tested. The self-test circuitry includes an AC self-test controller and a clock splitter. The clock splitter generates the sequence of data pulses including a long data capture pulse followed by an at speed data launch pulse and an at speed data capture pulse followed by a long data launch pulse. The at speed data launch pulse and the at speed data capture pulse are generated for a common cycle of the system clock.

  9. Towards an AC-MOT of CaF

    Science.gov (United States)

    Anderegg, Loic; Chae, Eunmi; Ravi, Aakash; Augenbraun, Benjamin; Hemmerling, Boerge; Drayna, Garrett; Hutzler, Nicholas; Collopy, Alejandra; Wu, Yewei; Ding, Shiqian; Ye, Jun; Ketterle, Wolfgang; Doyle, John

    2016-05-01

    Ultra-cold diatomic molecules have rich prospects as candidates to study controlled ultra-cold chemistry, strongly correlated systems and precision measurements. They are also considered as possible qubits in quantum computing and simulation schemes. We report on progress towards loading CaF into a molecular magneto-optical trap (MOT). An AC-MOT will be used to actively remix magnetic dark states via both polarization and magnetic field switching. In order to load a molecular MOT, we have successfully laser slowed a CaF beam to near the expected capture velocity. We describe our AC-MOT apparatus, which is designed to co-trap CaF and Li. We outline our planned study of CaF-Li collisions to explore the feasibility of sympathetically cooling molecules to ultra-cold temperatures.

  10. Development of ac corona discharge modes at atmospheric pressure

    International Nuclear Information System (INIS)

    Corona discharges in gases exist under several distinctive forms. In this paper, a survey study has been made of ac corona discharge modes generated in some different gases fed in a wire-duct reactor with a constant rate of flowing at atmospheric pressure. The properties of different corona modes are analyzed under some condition transitions from Trichel pulses to a steady glow. In the course of the presented experimental work, numerous apparent contradictions with earlier observations necessitated further study and are given to provide more information on the physical mechanisms of the ac corona discharges. Furthermore, we have gained insight into some new technologies and applications of the environmentally friendly corona and plasma discharges.

  11. Effective nonlinear AC response to composite with spherical particles

    Institute of Scientific and Technical Information of China (English)

    Chen Xiao-Gang; Liang Fang-Chu; Wei En-Bo

    2005-01-01

    An effective nonlinear alternative-current (AC) response to granular nonlinear-composite with spherical inclusions embedded in a host medium under the action of an external AC field is investigated by using a perturbation approach.The local potentials of composite at higher harmonics are derived both in a region of local inclusion particles and in a local host region under the action of a sinusoidal field E1 sinωt + E3sin3ωt. An effective nonlinear-response to composite and the relationship between the effective nonlinear-responses at the fundamental frequency and the third harmonics are also studied for the spherical inclusions in a dilute limit.

  12. ac power control in the Core Flow Test Loop

    International Nuclear Information System (INIS)

    This work represents a status report on a development effort to design an ac power controller for the Core Flow Test Loop. The Core Flow Test Loop will be an engineering test facility which will simulate the thermal environment of a gas-cooled fast-breeder reactor. The problems and limitations of using sinusoidal ac power to simulate the power generated within a nuclear reactor are addressed. The transformer-thyristor configuration chosen for the Core Flow Test Loop power supply is presented. The initial considerations, design, and analysis of a closed-loop controller prototype are detailed. The design is then analyzed for improved performance possibilities and failure modes are investigated at length. A summary of the work completed to date and a proposed outline for continued development completes the report

  13. Fiber Materials AC Impedance Characteristics and Principium Analysis

    Science.gov (United States)

    Wang, Jianjun; Li, Xiaofeng

    With an invariable amplitude and variable frequency inspiriting, impedance of fiber materials rapidly decrease at first and then increase speedy followed with increasing of signal frequency. For the impedance curve of frequency is section of bathtub, this phenomenon is defined as alternating current electric conductive bathtub effect of fiber material. With analysis tools,of circuit theory and medium polarization theory, the phenomenon can be deeply detected that in AC electric field there are four different kind of currents in fiber material: absorbing current, conductance current, charging current and superficial current. With more analyzing it's discovered this phenomenon can be explained by medium polarize theory. Make using of fiber AC electric conductivity bathtub effect, fast testing equipment on fiber moisture regain can be invent, and disadvantages of conventional impedance technique, such as greatness test error and electrode polarization easily. This paper affords directions to design novel speediness fiber moisture test equipments in theory.

  14. Ac magnetic susceptibility study of in vivo nanoparticle biodistribution

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, L; Veintemillas-Verdaguer, S; Serna, C J; Morales, M P [Instituto de Ciencia de Materiales de Madrid, ICMM-CSIC, Sor Juana Ines de la Cruz 3, Cantoblanco 28049, Madrid (Spain); MejIas, R; Barber, D F [Centro Nacional de BiotecnologIa, CNB-CSIC, Darwin 3, Cantoblanco 28049, Madrid (Spain); Lazaro, F J, E-mail: lucia@icmm.csic.es [Departamento de Ciencia y Tecnologia de Materiales y Fluidos, Universidad de Zaragoza, Maria de Luna 3, 50018, Zaragoza (Spain)

    2011-06-29

    We analysed magnetic nanoparticle biodistribution, before and after cytokine conjugation, in a mouse model by ac susceptibility measurements of the corresponding resected tissues. Mice received repeated intravenous injections of nanoparticle suspension for two weeks and they were euthanized 1 h after the last injection. In general, only 10% of the total injected nanoparticles after multiple exposures were found in tissues. The rest of the particles may probably be metabolized or excreted by the organism. Our findings indicate that the adsorption of interferon to DMSA-coated magnetic nanoparticles changes their biodistribution, reducing the presence of nanoparticles in lungs and therefore their possible toxicity. The specific targeting of the particles to tumour tissues by the use of an external magnetic field has also been studied. Magnetic nanoparticles were observed by transmission electron microscopy in the targeted tissue and quantified by ac magnetic susceptibility.

  15. [Effect of prostatilen AC suppositories on course of experimental prostatitis].

    Science.gov (United States)

    Savateeva-Liubimova, T N; Sivak, K V; Malinin, V V

    2012-01-01

    The article presents the results of evaluation of efficacy of new drug prostatilen AC (rectal suppositories), containing regulatory peptides of the bovine prostate and zinc arginate-glycinate complex, in the treatment of prostatitis. The experiment was conducted on 40 Sprague-Dawley rats weighing 180-200 g. Chronic prostatitis was modeled by injection of 10% Dimexidum in combination with water, mixed with turpentine, a volumetric ratio of 4:1. It is shown that prostatilen AC has pronounced organotropic antiinflammatory effect, which manifests in reducing the weight of the prostate, reducing the protein level in the urine, activity of acid phosphatase, and levels of ceruloplasmin and C-reactive protein. In addition, this drug normalizes the act of urination and increases the diurnal diuresis, has antioxidant properties and increases the blood level of the male sex hormone testosterone.

  16. Low power DCVSL circuits employing AC power supply

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In view of changing the type of energy conversion in CMOS circuits, this paper investigates low power CMOS circuit design, which adopts a gradually changing power clock. First, we discuss the algebraic expressions and the corresponding properties of clocked power signals. Then the design procedure is summed up for converting complementary CMOS logic gates employing DC power to the power-clocked CMOS gates employing AC power. On this basis, the design of differential cascode voltage switch logic (DCVSL) circuits employing AC power clocks is proposed. The PSPICE simulations using a sinusoidal power-clock demonstrate that the designed power-clocked DCVSL circuit has a correct logic function and low power characteristics. Finally, an interface circuit to convert clocked signals into the standard logic levels of a CMOS circuit is proposed, and its validity is verified by computer simulations.

  17. Total loss of AC power analysis for EPR reactor

    Energy Technology Data Exchange (ETDEWEB)

    Darnowski, Piotr, E-mail: piotr.darnowski@itc.pw.edu.pl [Warsaw University of Technology, Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland); Skrzypek, Eleonora, E-mail: eleonora.skrzypek@ncbj.gov.pl [Warsaw University of Technology, Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland); National Centre for Nuclear Research (NCBJ), A. Sołtana 7, 05-400 Otwock-Świerk (Poland); Mazgaj, Piotr, E-mail: piotr.mazgaj@itc.pw.edu.pl [Warsaw University of Technology, Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland); Świrski, Konrad [Warsaw University of Technology, Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland); Gandrille, Pascal [AREVA NP SAS, Tour AREVA, 1 place Jean Millier, 92084 Paris La Défense (France)

    2015-08-15

    Highlights: • Total loss of AC power (Station Blackout) was simulated for the EPR reactor model. • In-vessel phase of the accident is under consideration. • Comparison of MELCOR and MAAP results is presented. • MELCOR and MAAP results are comparable. - Abstract: In this paper the results of severe accident simulations for the EPR reactor in the case of loss of offsite power combined with total failure of all diesel generators (total loss of AC power) are presented. Calculations were performed with MELCOR 2.1 computer code for in-vessel phase of the accident. In this scenario, the unavailability of all offsite and onsite power sources and the lack of cooling leads directly to core degradation, material relocation to the lower plenum and rupture of the reactor pressure vessel. MELCOR results were compared qualitatively and quantitatively with MAAP4 code results and show a good agreement.

  18. Strongly nonlinear dynamics of electrolytes in large ac voltages

    CERN Document Server

    Olesen, Laurits H; Bruus, Henrik

    2009-01-01

    We study the response of a model micro-electrochemical cell to a large ac voltage of frequency comparable to the inverse cell relaxation time. To bring out the basic physics, we consider the simplest possible model of a symmetric binary electrolyte confined between parallel-plate blocking electrodes, ignoring any transverse instability or fluid flow. We analyze the resulting one-dimensional problem by matched asymptotic expansions in the limit of thin double layers and extend previous work into the strongly nonlinear regime, which is characterized by two novel features - significant salt depletion in the electrolyte near the electrodes and, at very large voltage, the breakdown of the quasi-equilibrium structure of the double layers. The former leads to the prediction of "ac capacitive desalination", since there is a time-averaged transfer of salt from the bulk to the double layers, via oscillating diffusion layers. The latter is associated with transient diffusion limitation, which drives the formation and co...

  19. Ac magnetic susceptibility study of in vivo nanoparticle biodistribution

    International Nuclear Information System (INIS)

    We analysed magnetic nanoparticle biodistribution, before and after cytokine conjugation, in a mouse model by ac susceptibility measurements of the corresponding resected tissues. Mice received repeated intravenous injections of nanoparticle suspension for two weeks and they were euthanized 1 h after the last injection. In general, only 10% of the total injected nanoparticles after multiple exposures were found in tissues. The rest of the particles may probably be metabolized or excreted by the organism. Our findings indicate that the adsorption of interferon to DMSA-coated magnetic nanoparticles changes their biodistribution, reducing the presence of nanoparticles in lungs and therefore their possible toxicity. The specific targeting of the particles to tumour tissues by the use of an external magnetic field has also been studied. Magnetic nanoparticles were observed by transmission electron microscopy in the targeted tissue and quantified by ac magnetic susceptibility.

  20. Photovoltaic Inverter Controllers Seeking AC Optimal Power Flow Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Dall' Anese, Emiliano; Dhople, Sairaj V.; Giannakis, Georgios B.

    2016-07-01

    This paper considers future distribution networks featuring inverter-interfaced photovoltaic (PV) systems, and addresses the synthesis of feedback controllers that seek real- and reactive-power inverter setpoints corresponding to AC optimal power flow (OPF) solutions. The objective is to bridge the temporal gap between long-term system optimization and real-time inverter control, and enable seamless PV-owner participation without compromising system efficiency and stability. The design of the controllers is grounded on a dual ..epsilon..-subgradient method, while semidefinite programming relaxations are advocated to bypass the non-convexity of AC OPF formulations. Global convergence of inverter output powers is analytically established for diminishing stepsize rules for cases where: i) computational limits dictate asynchronous updates of the controller signals, and ii) inverter reference inputs may be updated at a faster rate than the power-output settling time.

  1. Small-Signal Analysis of Single-Phase and Three-phase DC/AC and AC/DC PWM Converters with the Frequency-Shift Technique

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Aquila, A. Dell’; Liserre, Marco;

    2004-01-01

    A systematic approach to study dc/ac and ac/dc converters without the use of synchronous transformation is proposed. The use of a frequency-shift technique allows a straightforward analysis of single-phase and three-phase systems. The study of dc/ac and of ac/dc converters is reported to the study...... of dc/dc converters via a 50 Hz frequency-shift. The input admittance is calculated and measured for two study examples (a three-phase active rectifier and a single-phase photovoltaic inverter). These examples show that the purpose of a well designed controller for grid-connected converters...

  2. Removal of pharmaceutically active compounds (PhACs) and toxicological response of Cyperus alternifolius exposed to PhACs in microcosm constructed wetlands.

    Science.gov (United States)

    Yan, Qing; Feng, Guozhong; Gao, Xu; Sun, Chengxiao; Guo, Jin-song; Zhu, Zhiwei

    2016-01-15

    This study investigated the effects of selected four pharmaceutically active compounds (PhACs) (carbamazepine, sulfamethoxazole, ofloxacin, and roxithromycin) on the photosynthesis and antioxidant enzymes of Cyperus alternifolius in constructed wetlands (CWs). Moreover, the removal and kinetics of PhACs in CWs were evaluated to explore the related removal mechanisms. Results showed that C. alternifolius can uptake and withstand certain PhACs. The PhAC tolerance of C. alternifolius might be attributed to their capacity to maintain relatively normal photosynthetic activity and elevated antioxidative defense. CWs offered comparable or even higher removal efficiencies for the selected PhACs compared with conventional WWTPs. The removal of the target PhACs was enhanced in the planted CWs versus the unplanted CWs mostly because of plant uptake and rhizosphere effects. In particular, carbamazepine, which is considered the most recalcitrant of the PhACs, was significantly reduced (p<0.05). The removal of target PhACs fitted into two distinct periods. The initial fast step (within the first 2 h) was essentially attributed to the adsorption onto the CW medium surface. The subsequent slow process (2-12 h) closely followed first-order kinetics probably because of the interaction between microorganisms and plants. The obtained results indicate that C. alternifolius can phytoremediate PhAC-contaminated waters in CWs. PMID:26465971

  3. AC Complex Impedance Analysis of Doped Strontium Titanate Multifunctional Ceramics

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Doped SrTiO3 capacitor-varistor multifunctional ceramics were fabricated by a single sintering process. AC compleximpedance analysis was performed to investigate electrical features ofgrains and grain boundaries for both as-reducedceramic and reoxidized ceramics. The results showed that the as-reduced ceramic exhibited inductive response athigh frequencies above 2 MHz, which is attributed to the contribution of electron behavior in semiconducting grains.The high frequency inductive response disappeared in impedance plots of reoxidized ceramics.

  4. AC system stabilization via phase shift transformer with thyristor commutation

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Jose Carlos de; Guimaraes, Geraldo Caixeta; Moraes, Adelio Jose [Uberlandia Univ., MG (Brazil); Abreu, Jose Policarpo G. de [Escola Federal de Engenharia de Itajuba, MG (Brazil); Oliveira, Edimar Jose de [Juiz de Fora Univ., MG (Brazil)

    1994-12-31

    This article aims to present initially the constructive and operative forms of a phase-shift autotransformer which provides both magnitude and phase angle change through thyristor commutation, including a technic to reduce the number of thyristors. Following, it is proposed a control system to make such equipment an efficient AC system stabilizing tool. It is presented some simulation results to show the operation of this transformer in an electrical system. (author) 3 refs., 11 figs., 3 tabs.

  5. Eddy Current Rail Inspection Using AC Bridge Techniques

    OpenAIRE

    Liu, Ze; Koffman, Andrew D; Waltrip, Bryan C; Wang, Yicheng

    2013-01-01

    AC bridge techniques commonly used for precision impedance measurements have been adapted to develop an eddy current sensor for rail defect detection. By using two detection coils instead of just one as in a conventional sensor, we can balance out the large baseline signals corresponding to a normal rail. We have significantly enhanced the detection sensitivity of the eddy current method by detecting and demodulating the differential signal of the two coils induced by rail defects, using a di...

  6. Photovoltaic Inverter Controllers Seeking AC Optimal Power Flow Solutions

    OpenAIRE

    Dall'Anese, Emiliano; Dhople, Sairaj V.; Giannakis, Georgios B.

    2014-01-01

    This paper considers future distribution networks featuring inverter-interfaced photovoltaic (PV) systems, and addresses the synthesis of feedback controllers that seek real- and reactive-power inverter setpoints corresponding to AC optimal power flow (OPF) solutions. The objective is to bridge the temporal gap between long-term system optimization and real-time inverter control, and enable seamless PV-owner participation without compromising system efficiency and stability. The design of the...

  7. Power Loss Modeling of Isolated AC/DC Converter

    OpenAIRE

    Ahmad Khan, Naveed

    2012-01-01

    Several research activities at KTH are carried out related to Isolated AC/DC converters in order to improve the design and efficiency. Concerning the improvement in the mentioned constraints, losses of the elements in the prototype converter are modeled in this thesis work. The obtained loss model is capable of calculating the losses under different circumstances. The individual contribution of losses for each element at different conditions can be obtained, which is further useful in improvi...

  8. AC Power Local Network with Multiple Power Routers

    OpenAIRE

    Ryo Takahashi; Yutaro Kitamori; Takashi Hikihara

    2013-01-01

    Controlling power flow and achieving appropriate matching between power sources and loads according to the quality of energy is expected to be one of the approaches to reduce wasted energy consumption. A power router, proposed recently, has the capability of realizing circuit switching in a power distribution network. This study focuses on the feasibility of an AC power routing network system composed of multiple power routers. To evaluate the feasibility, we experimentally confirm the circui...

  9. Transient Temperature Analysis for Industrial AC Arc Furnace Bottom

    Institute of Scientific and Technical Information of China (English)

    (U)nal (C)amdal1; Murat Tun(c)

    2004-01-01

    Heat losses from the furnaces depend on the design and size. The surface heat loss from the bottom of an industrial AC electric arc furnace (EAF) possesses an important fraction of overall losses. So in this study the transient temperature variation at the bottom of the EAF was investigated. The transient temperature analysis was carried out using MATLAB computer program. T=T(r, t) for different bottom lining layers was depicted.

  10. MD 349: Impedance Localization with AC-dipole

    CERN Document Server

    Biancacci, Nicolo; Metral, Elias; Salvant, Benoit; Papotti, Giulia; Persson, Tobias Hakan Bjorn; Tomas Garcia, Rogelio; CERN. Geneva. ATS Department

    2016-01-01

    The purpose of this MD is to measure the distribution of the transverse impedance of the LHC by observing the phase advance variation with intensity between the machine BPMs. Four injected bunches with different intensities are excited with an AC dipole and the turn by turn data is acquired from the BPM system. Through post-processing analysis the phase variation along the machine is depicted and, from this information, first conclusions of the impedance distribution can be drawn.

  11. A Linear-Programming Approximation of AC Power Flows

    OpenAIRE

    Coffrin, Carleton; Van Hentenryck, Pascal

    2012-01-01

    Linear active-power-only DC power flow approximations are pervasive in the planning and control of power systems. However, these approximations fail to capture reactive power and voltage magnitudes, both of which are necessary in many applications to ensure voltage stability and AC power flow feasibility. This paper proposes linear-programming models (the LPAC models) that incorporate reactive power and voltage magnitudes in a linear power flow approximation. The LPAC models are built on a co...

  12. Leonurenones A-C: Labdane diterpenes from Leonotis leonurus.

    Science.gov (United States)

    He, Fang; Lindqvist, Charlotte; Harding, Wayne W

    2012-11-01

    Labdanes, leonurenones A-C, two known labdanes, luteolin 7-O-β-glucoside and luteolin were isolated and characterized from a commercial source of Leonotis leonurus. Genetic methods allowed for identification of the plant material. The leonurenones contain an uncommon α,β-unsaturated enone moiety in ring B, and leonurenones A and B were evaluated in a competitive inhibition assay at the GABA A neuroreceptor site.

  13. DIAGNOSTIC FEATURES RESEARCH OF AC ELECTRIC POINT MOTORS

    Directory of Open Access Journals (Sweden)

    S. YU. Buryak

    2014-05-01

    Full Text Available Purpose.Considerable responsibility for safety of operation rests on signal telephone and telegraph department of railway. One of the most attackable nodes (both automation systems, and railway in whole is track switches. The aim of this investigation is developing such system for monitoring and diagnostics of track switches, which would fully meet the requirements of modern conditions of high-speed motion and heavy trains and producing diagnostics, collection and systematization of data in an automated way. Methodology. In order to achieve the desired objectives research of a structure and the operating principle description of the switch electric drive, sequence of triggering its main units were carried out. The operating characteristics and settings, operating conditions, the causes of failures in the work, andrequirements for electric drives technology and their service were considered and analyzed. Basic analysis principles of dependence of nature of the changes the current waveform, which flows in the working circuit of AC electric point motor were determined. Technical implementation of the monitoring and diagnosing system the state of AC electric point motors was carried out. Findings. Signals taken from serviceable and defective electric turnouts were researched. Originality. Identified a strong interconnectionbetween the technical condition of the track switchand curve shape that describes the current in the circuit of AC electric point motor during operation which is based on the research processes that have influence on it during operation. Practical value. Shown the principles of the technical approach to the transition from scheduled preventive maintenance to maintenance of real condition for a more objective assessment and thus more rapid response to emerging or failures when they occur gradually, damages and any other shortcomings in the work track switch AC drives.

  14. AC electric field induced vortex in laminar coflow diffusion flames

    KAUST Repository

    Xiong, Yuan

    2014-09-22

    Experiments were performed by applying sub-critical high-voltage alternating current (AC) to the nozzle of laminar propane coflow diffusion flames. Light scattering, laser-induced incandescence and laser-induced fluorescence techniques were used to identify the soot zone, and the structures of OH and polycyclic aromatic hydrocarbons (PAHs). Particle image velocimetry was adopted to quantify the velocity field. Under certain AC conditions of applied voltage and frequency, the distribution of PAHs and the flow field near the nozzle exit were drastically altered, leading to the formation of toroidal vortices. Increased residence time and heat recirculation inside the vortex resulted in appreciable formation of PAHs and soot near the nozzle exit. Decreased residence time along the jet axis through flow acceleration by the vortex led to a reduction in the soot volume fraction in the downstream sooting zone. Electromagnetic force generated by AC was proposed as a viable mechanism for the formation of the toroidal vortex. The onset conditions for the vortex formation supported the role of an electromagnetic force acting on charged particles in the flame zone. (C) 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

  15. AC Conductivity and Dielectric Properties of Borotellurite Glass

    Science.gov (United States)

    Taha, T. A.; Azab, A. A.

    2016-10-01

    Borotellurite glasses with formula 60B2O3-10ZnO-(30 - x)NaF- xTeO2 ( x = 0 mol.%, 5 mol.%, 10 mol.%, and 15 mol.%) have been synthesized by thermal melting. X-ray diffraction (XRD) analysis confirmed that the glasses were amorphous. The glass density ( ρ) was determined by the Archimedes method at room temperature. The density ( ρ) and molar volume ( V m) were found to increase with increasing TeO2 content. The direct-current (DC) conductivity was measured in the temperature range from 473 K to 623 K, in which the electrical activation energy of ionic conduction increased from 0.27 eV to 0.48 eV with increasing TeO2 content from 0 mol.% to 15 mol.%. The dielectric parameters and alternating-current (AC) conductivity ( σ ac) were investigated in the frequency range from 1 kHz to 1 MHz and temperature range from 300 K to 633 K. The AC conductivity and dielectric constant decreased with increasing TeO2 content from 0 mol.% to 15 mol.%.

  16. The ACS-NUCL Division 50th Anniversary: Introduction

    Energy Technology Data Exchange (ETDEWEB)

    Hobart, David E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-10

    The ACS Division of Nuclear Chemistry and Technology was initiated in 1955 as a subdivision of the Division of Industrial and Engineering Chemistry. Probationary divisional status was lifted in 1965. The Division’s first symposium was held in Denver in 1964 and it is fitting that we kicked-off the 50th Anniversary in Denver in the spring of 2015. Listed as a small ACS Division with only about 1,000 members, NUCL’s impact over the past fifty years has been remarkable. National ACS meetings have had many symposia sponsored or cosponsored by NUCL that included Nobel Laureates, U.S. Senators, other high-ranking officials and many students as speakers. The range of subjects has been exceptional as are the various prestigious awards established by the Division. Of major impact has been the past 30 years of the NUCL Nuclear Chemistry Summer Schools to help fill the void of qualified nuclear scientists and technicians. In celebrating the 50th Anniversary we honor the past, celebrate the present and shape the future of the Division and nuclear science and technology. To celebrate this auspicious occasion a commemorative lapel pin has been designed for distribution to NUCL Division members.

  17. On conformal field theories with extremal (a/c) values

    International Nuclear Information System (INIS)

    Unitary conformal field theories (CFTs) are believed to have positive (non-negative) energy correlators. Energy correlators are universal observables in higher-dimensional CFTs built out of integrated Wightman functions of the stress-energy tensor. We analyze energy correlators in parity invariant four-dimensional CFTs. The goal is to use the positivity of energy correlators to further constrain unitary CFTs. It is known that the positivity of the simplest one-point energy correlator implies that (1/3)≤(a/c)≤(31/18) where a and c are the Weyl anomaly coefficients. We use the positivity of higher point energy correlators to show that CFTs with extremal values of (a/c) have trivial scattering observables. More precisely, for (a/c)=(1/3) and (a/c)=(31/18) all energy correlators are fixed to be the ones of the free boson and the free vector theory correspondingly. Similarly, we show that the positivity and finiteness of energy correlators together imply that the three-point function of the stress tensor in a CFT cannot be proportional to the one in the theory of free boson, free fermion or free vector field

  18. Esotropia and high ac/a ratio; therapy

    Directory of Open Access Journals (Sweden)

    Risović Dušica J.

    2003-01-01

    Full Text Available We have treated 55 children with accommodative esotropia and high AC/A ratio with progressive addition lenses, measured by heterophoria method. All of them wear full hyperopic refraction for distance and addition of +1,00 to 3,5 spheres for near vision. The minimal add that allowed the maximal reduction in the near deviation was prescribed appointed to follow-up control three months after the use of the new lenses, and thereafter every six months. A progressive reduction of the abnormally high AC/A ratio (difference between distance and near deviation measurements showed 45 children (81,81% but ten of them (18,19% deteriorated into non- accommodative esotropia requiring surgical treatment. The age of initial use of progressive-addition lenses ranged from 26 months to 7 years (average: 63,2 months. The age of onset of the esotropia ranged from 7 months to 82 months (average: 28,7 months. The initial add was of +3,00 diopters in 39 children (70,8%. The mean add prescription for whole study group was 2,96 diopters. A progressive improvement of the AC/A ratio achieving normal after a mean of 18 to 24 months in a significant number of cases.

  19. Effects of AC Electric Field on Small Laminar Nonpremixed Flames

    KAUST Repository

    Xiong, Yuan

    2015-04-01

    Electric field can be a viable method in controlling various combustion properties. Comparing to traditional actuators, an application of electric field requires very small power consumption. Especially, alternating current (AC) has received attention recently, since it could modulate flames appreciably even for the cases when direct current (DC) has minimal effects. In this study, the effect of AC electric fields on small coflow diffusion flames is focused with applications of various laser diagnostic techniques. Flow characteristics of baseline diffusion flames, which corresponds to stationary small coflow diffusion flames when electric field is not applied, were firstly investigated with a particular focus on the flow field in near-nozzle region with the buoyancy force exerted on fuels due to density differences among fuel, ambient air, and burnt gas. The result showed that the buoyancy force exerted on the fuel as well as on burnt gas significantly distorted the near-nozzle flow-fields. In the fuels with densities heavier than air, recirculation zones were formed very close to the nozzle exit. Nozzle heating effect influenced this near-nozzle flow-field particularly among lighter fuels. Numerical simulations were also conducted and the results showed that a fuel inlet boundary condition with a fully developed velocity profile for cases with long fuel tubes should be specified inside the fuel tube to obtain satisfactory agreement in both the flow and temperature fields with those from experiment. With sub-critical AC applied to the baseline flames, particle image velocimetry (PIV), light scattering, laser-induced incandescence (LII), and laser-induced fluores- cence (LIF) techniques were adopted to identify the flow field and the structures of OH, polycyclic aromatic hydrocarbons (PAHs), soot zone. Under certain AC condi- tions of applied voltage and frequency, the distribution of PAHs and the flow field near the nozzle exit were drastically altered from the

  20. AC electrokinetic manipulation of selenium nanoparticles for potential nanosensor applications

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoodi, Seyed Reza [School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Bayati, Marzieh, E-mail: m-bayati@tums.ac.ir [School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Hosseinirad, Somayeh [School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Foroumadi, Alireza [Department of Medicinal Chemistry, Faculty of Pharmacy and Pharmaceutical Sciences Research Center, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Gilani, Kambiz [Department of Pharmaceutics, School of Pharmacy, Tehran University of Medical Science, Tehran (Iran, Islamic Republic of); Rezayat, Seyed Mahdi [School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of)

    2013-03-15

    Highlights: ► Se nanoparticles were synthesized using a reverse-microemulsion process. ► AC osmotic fluid flow repulses the particles from electrode edges. ► Dielectrophoretic force attracts the particles to electrode edges. ► Dielectrophoresis electrode showed non-ohmic behavior. ► The device can potentially be used as a nanosensor. - Abstract: We report the AC electrokinetic behavior of selenium (Se) nanoparticles for electrical characterization and possible application as micro/nano devices. selenium Se nanoparticles were successfully synthesized using a reverse-microemulsion process and investigated structurally using X-ray diffraction and transmission electron microscope. Interdigitated castellated ITO and non-castellated platinum electrodes were employed for manipulation of suspended materials in the fluid. Using ITO electrodes at low frequency limits resulted in deposition of Se particles on electrode surface. When Se particles exposed to platinum electrodes in the 10 Hz–1 kHz range and V {sub p−p}> 8, AC osmotic fluid flow repulses the particles from electrode edges. However, in 10 kHz–10 MHz range and V {sub p−p}> 5, dielectrophoretic force attracts the particles to electrode edges. As the Se particle concentration increased, the trapped Se particles were aligned along the electric field line and bridged the electrode gap. The device was characterized and can potentially be useful in making micro/nano electronic devices.

  1. Working with the American Community Survey in R a guide to using the acs package

    CERN Document Server

    Glenn, Ezra Haber

    2016-01-01

    This book serves as a hands-on guide to the "acs" R package for demographers, planners, and other researchers who work with American Community Survey (ACS) data. It gathers the most common problems associated with using ACS data and implements functions as a package in the R statistical programming language. The package defines a new "acs" class object (containing estimates, standard errors, and metadata for tables from the ACS) with methods to deal appropriately with common tasks (e.g., creating and combining subgroups or geographies, automatic fetching of data via the Census API, mathematical operations on estimates, tests of significance, plots of confidence intervals).

  2. Dicty_cDB: FC-AC21 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available FC (Link to library) FC-AC21 (Link to dictyBase) - - - Contig-U15104-1 FC-AC21E (Li...nk to Original site) - - - - - - FC-AC21E 527 Show FC-AC21 Library FC (Link to library) Clone ID FC-AC21 (Link to dict...yBase) Atlas ID - NBRP ID - dictyBase ID - Link to Contig Contig-U15104-1 Original site URL http://dict...ce KDSLDVIIFPEMVKLVGLTPNTMEKVLTYFQDNDTIDLSTFPMEIQVEQLSGKYIFICTH KQKDQRCGYCGPILVDQLRDQIKERSLEKEIQVFGTSHVGGHKY... Frames) Frame A: KDSLDVIIFPEMVKLVGLTPNTMEKVLTYFQDNDTIDLSTFPMEIQVEQLSGKYIFICTH KQ

  3. Production of AC-225 and application of the BI-213 daughter in cancer therapy

    Science.gov (United States)

    Koch, L.; Apostolidis, C.; Janssens, W.; Molinet, R.; van Geel, J.

    1999-01-01

    There are several ongoing medical trials to use Bi-213 conjugated to monoclonal antibodies to kill tumour-cells of various cancer types. The institute is supplying Ac-225 generators for the test and is itself engaged in in-vitro cytotoxicity tests. Nuclear reactions leading to Ac-225 are discussed. The present supply of Ac-225 stems from Th-229 decay obtained from aged U-233. From the possible alternative the reactions Ra-226 (p, 2n) Ac-225 is presently favoured. The fabrication of a Ac-225 for Bi-213 generator will be described.

  4. Low Friction Cryostat for HTS Power Cable of Dutch Project

    NARCIS (Netherlands)

    Chevtchenko, O.; Zuijderduin, R.; Smit, J.; Willen, D.; Lentge, H.; Thidemann, C.; Traeholt, C.

    2012-01-01

    Particulars of 6 km long HTS AC power cable for Amsterdam project are: a cable has to fit in an annulus of 160 mm, with only two cooling stations at the cable ends [1]. Application of existing solutions for HTS cables would result in excessively high coolant pressure drop in the cable, possibly affe

  5. Differential expression of CD300a/c on human TH1 and TH17 cells

    Directory of Open Access Journals (Sweden)

    Borrego Francisco

    2011-11-01

    Full Text Available Abstract Background Human memory CD4+ T cells can be either CD300a/c+ or CD300a/c- and subsequent analyses showed that CD4+ effector memory T (TEM cells are mostly CD300a/c+, whereas CD4+ central memory T (TCM cells have similar frequencies of CD300a/c+ and CD300a/c- cells. Results Extensive phenotypical and functional characterization showed that in both TCM and TEM cells, the CD300a/c+ subset contained a higher number of TH1 (IFN-γ producing cells. Alternatively, TH17 (IL-17a producing cells tend to be CD300a/c-, especially in the TEM subset. Further characterization of the IL-17a+ cells showed that cells that produce only this cytokine are mostly CD300a/c-, while cells that produce IL-17a in combination with other cytokines, especially IFN-γ, are mostly CD300a/c+, indicating that the expression of this receptor is associated with cells that produce IFN-γ. Co-ligation of the TCR and CD300a/c in CD4+ T cells inhibited Ca2+ mobilization evoked by TCR ligation alone and modulated IFN-γ production on TH1 polarized cells. Conclusion We conclude that the CD300a/c receptors are differentially expressed on human TH1 and TH17 cells and that their ligation is capable of modulating TCR mediated signals.

  6. 144例近视患者AC/A值与近视处方

    Institute of Scientific and Technical Information of China (English)

    贾宝轩

    2010-01-01

    目的:研究青少年近视眼与AC/A值的关系,讨论结合AC/A值确定处方的必要性.方法:随机抽取144名10~19岁的患者,进行眼镜全矫,根据屈光度分成6组,然后进行AC/A值的测定.结果:通过AC/A值的比较,可以看出近视眼患者的AC/A值和正常值有差距,而且AC/A平均值随近视度增加有升高的趋势.结论:针对近视患者,在主客观验光的基础上,要结合AC/A检查结果,为患者提供合理的处方.

  7. Colloid Thruster for Attitude Control Systems (ACS) and Tip-off Control Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Busek proposes to develop and deliver a complete engineering model colloid thruster system, capable of thrust levels and lifetimes required for spacecraft...

  8. Colloid Thruster for Attitude Control Systems (ACS) and Tip-off Control Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop and test key technologies needed for an integrated, high thrust colloid thruster system with no moving parts, for spacecraft attitude control...

  9. The dynamic process of atmospheric water sorption in [EMIM][Ac] and mixtures of [EMIM][Ac] with biopolymers and CO2 capture in these systems.

    Science.gov (United States)

    Chen, Yu; Sun, Xiaofu; Yan, Chuanyu; Cao, Yuanyuan; Mu, Tiancheng

    2014-10-01

    There are mainly three findings related to the dynamic process of atmospheric water sorption in the ionic liquid (IL) 1-ethyl-3-methlyl-imidazolium acetate ([EMIM][Ac]) and its mixtures with biopolymers (i.e., cellulose, chitin, and chitosan), and CO2 capture in these systems above. The analytical methods mainly include gravimetric hygroscopicity measurement and in situ infrared spectroscopy with the techniques of difference, derivative, deconvoluted attenuated total reflectance and two-dimensional correlation. These three findings are listed as below. (1) Pure [EMIM][Ac] only shows a two-regime pattern, while all the mixtures of [EMIM][Ac] with biopolymers (i.e., cellulose, chitin, and chitosan) present a three-regime tendency for the dynamic process of atmospheric water sorption. Specifically, the IL/chitosan mixture has a clear three-regime mode; the [EMIM][Ac]/chitin mixture has an unclear indiscernible regime 3; and the [EMIM][Ac]/cellulose mixture shows an indiscernible regime 2. (2) [EMIM][Ac] and its mixtures with biopolymers could physically absorb a trace amount of and chemically react with a much larger amount of CO2 from the air. The chemisorption capacity of CO2 in these pure and mixed systems is ordered as chitosan/[EMIM][Ac] mixture > chitin/[EMIM][Ac] mixture > cellulose/[EMIM][Ac] mixture > pure [EMIM][Ac] (ca. 0.09 mass ratio % g/g CO2/IL). (3) The CO2 solubility in [EMIM][Ac] decreases about 50% after being exposed to the atmospheric moist air for some specific time period.

  10. Power Project Starts Operation for Guangdong

    Institute of Scientific and Technical Information of China (English)

    Zhang Lisheng

    2002-01-01

    @@ The third circuit of the Tianshengqiao (TSQ)Guangdong 500-KV AC power transmission and transformation project, one of China's key projects for transmitting power from west to east in China, began operation on June 25. Its operation marks the use of the fourth channel for power transmission from the west to South China's Guangdong Province aswell as successful completion of the second campaign to fulfill the State's plan to transmit 10 GW of electric power from west to Guangdong Province in the 10th Five-Year period (2001~2005).

  11. Project Temporalities

    DEFF Research Database (Denmark)

    Tryggestad, Kjell; Justesen, Lise; Mouritsen, Jan

    2013-01-01

    into account. This may require investments in new project management technologies. Originality/value – This paper adds to the literatures on project temporalities and stakeholder theory by connecting them to the question of non-human stakeholders and to project management technologies.......Purpose – The purpose of this paper is to explore how animals can become stakeholders in interaction with project management technologies and what happens with project temporalities when new and surprising stakeholders become part of a project and a recognized matter of concern to be taken...... into account. Design/methodology/approach – The paper is based on a qualitative case study of a project in the building industry. The authors use actor-network theory (ANT) to analyze the emergence of animal stakeholders, stakes and temporalities. Findings – The study shows how project temporalities can...

  12. Intending Projects

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Project name: New construction project of production,research & development base of hydraulic system Construction site: Qingpu Industrial Park Construction unit: Parker Hannifin Industrial Hydraulic Technology (Shanghai) Co., Ltd.

  13. Alzheimer's Project

    Medline Plus

    Full Text Available ... Momentum in Science, Part 2" (70 minutes) Be a part of something big. HBO's "THE ALZHEIMER'S PROJECT" ... vital research and services. "THE ALZHEIMER'S PROJECT" is a presentation of HBO Documentary Films and the National ...

  14. Alzheimer's Project

    Science.gov (United States)

    ... state Home > News & Events > Upcoming Events > HBO Alzheimer’s Project In the News Walk to End Alzheimer's Upcoming ... Disease Awareness Month World Alzheimer's Month HBO Alzheimer’s Project MAKE A DONATION Your gift will help us ...

  15. Virtual projects

    DEFF Research Database (Denmark)

    Svejvig, Per; Commisso, Trine Hald

    2012-01-01

    Virtual projects are common with global competition, market development, and not least the financial crisis forcing organizations to reduce their costs drastically. Organizations therefore have to place high importance on ways to carry out virtual projects and consider appropriate practices...... that the best practice knowledge has not permeated sufficiently to the practice. Furthermore, the appropriate application of information and communication technology (ICT) remains a big challenge, and finally project managers are not sufficiently trained in organizing and conducting virtual projects...

  16. Project Management

    OpenAIRE

    Lörinc, Jan

    2012-01-01

    This work deals with the problems in the process of project management in enterprises. It examines the precise approaches, the possibility of standardizingthe approach to project team management and motivation of its members and their role in the process of project management. He confronts the views and attitudes of selected authors. The theoretical conclusions of findings compares with knowledgeacquired from research carried out on project management in a selected company.Evaluates managemen...

  17. Project ethics

    CERN Document Server

    Jonasson, Haukur Ingi

    2013-01-01

    How relevant is ethics to project management? The book - which aims to demystify the field of ethics for project managers and managers in general - takes both a critical and a practical look at project management in terms of success criteria, and ethical opportunities and risks. The goal is to help the reader to use ethical theory to further identify opportunities and risks within their projects and thereby to advance more directly along the path of mature and sustainable managerial practice.

  18. High Voltage AC underground cable systems for power transmission - a review of the Danish experience, part 1

    DEFF Research Database (Denmark)

    Bak, Claus Leth; Silva, Filipe Miguel Faria da

    2016-01-01

    researching electrical engineering topics related to using underground cables for power transmission at EHV level and including the 420 kV level. The research topics were laid down by ET/AAU and Energinet.dk in the DANPAC (DANish Power systems with AC Cables) research project. The main topics are discussed......This paper is a first of two presenting a review of research results in underground cable transmission obtained by the Department of Energy Technology, Aalborg University ET/AAU and Danish TSO Energinet.dk within the last 6 years. The main core of the results are obtained by PhD students...... on the basis of 39 references published by ET/AAU and Energinet.dk. Part I of the paper explains the events that lead to the research project, reactive power compensation, modelling for transient studies, including field measurements and improvements to the existing models, and temporary overvoltages due...

  19. Expression Study of LeGAPDH, LeACO1, LeACS1A, and LeACS2 in Tomato Fruit (Solanum lycopersicum

    Directory of Open Access Journals (Sweden)

    Pijar Riza Anugerah

    2015-10-01

    Full Text Available Tomato is a climacteric fruit, which is characterized by ripening-related increase of respiration and elevated ethylene synthesis. Ethylene is the key hormone in ripening process of climacteric fruits. The objective of this research is to study the expression of three ethylene synthesis genes: LeACO1, LeACS1A, LeACS2, and a housekeeping gene LeGAPDH in ripening tomato fruit. Specific primers have been designed to amplify complementary DNA fragment of LeGAPDH (143 bp, LeACO1 (240 bp, LeACS1A (169 bp, and LeACS2 (148 bp using polymerase chain reaction. Nucleotide BLAST results of the complementary DNA fragments show high similarity with LeGAPDH (NM_001247874.1, LeACO1 (NM_001247095.1, LeACS1A(NM_001246993.1, LeACS2 (NM_001247249.1, respectively. Expression study showed that LeACO1, LeACS1A, LeACS2, and LeGAPDH genes were expressed in ripening tomato fruit. Isolation methods, reference sequences, and primers used in this study can be used in future experiments to study expression of genes responsible for ethylene synthesis using quantitative polymerase chain reaction and to design better strategy for controlling fruit ripening in agroindustry.

  20. Define Project

    DEFF Research Database (Denmark)

    Munk-Madsen, Andreas

    2005-01-01

    "Project" is a key concept in IS management. The word is frequently used in textbooks and standards. Yet we seldom find a precise definition of the concept. This paper discusses how to define the concept of a project. The proposed definition covers both heavily formalized projects and informally ...

  1. International Projects

    CERN Document Server

    2002-01-01

    Description of co-operation projects implemented with the help of Sweden is presented. Information on performance of Phare and IAEA Regional and National Technical Cooperation projects is provided. Phare project 'Creation of Radiation Protection Infrastructure and Development of Supporting Services' was started in 2002

  2. Map Projection

    CERN Document Server

    Ghaderpour, Ebrahim

    2014-01-01

    In this paper, we introduce some known map projections from a model of the Earth to a flat sheet of paper or map and derive the plotting equations for these projections. The first fundamental form and the Gaussian fundamental quantities are defined and applied to obtain the plotting equations and distortions in length, shape and size for some of these map projections.

  3. Construction and function of recombinant AcMNPV with double copies of v-cath gene

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Two recombinant baculoviruses, dciAcMNPV and dcdAcMNPV in which another copy of the v-cath gene controlled by ie1 promoter and polh promoter was inserted, were respectively constructed by the Bac-to-Bac system. The expression of the v-cath gene of the recombinant baculoviruses in Sf9 cells at different phases was investigated by SDS- PAGE and Western blot. The results showed that only recombinant virus dciAcMNPV containing late gene v-cath driven by early gene promoter could express V-CATH protein, cathepsin encoded by virus genome, 12 h post-infection and dcdAcMNPV containing late gene v-cath driven by late and very late gene promoters could express more V-CATH protein. Negative control ncAcMNPV, a mutant deleted v- cath gene, could not express V-CATH protein at all. The Spodopera exigua larvae were infected with viruses respectively and the results showed that the toxicity was as follows: dcdAcMNPV>dciAcMNPV>wtAcMNPV>ncAcMNPV. The toxicity of recombinant viruses and the characters of dead larvae showed that the v-cath gene was relative to viral toxicity and host liquefaction. Recombinant baculovirus dcdAcMNPV might be used as a new kind of safe viral-pes- ticide, because of its high toxicity obtained by adding another gene copy and changing the expression level of its own gene relative to virulence.

  4. H3K36ac Is an Evolutionary Conserved Plant Histone Modification That Marks Active Genes.

    Science.gov (United States)

    Mahrez, Walid; Arellano, Minerva Susana Trejo; Moreno-Romero, Jordi; Nakamura, Miyuki; Shu, Huan; Nanni, Paolo; Köhler, Claudia; Gruissem, Wilhelm; Hennig, Lars

    2016-03-01

    In eukaryotic cells, histones are subject to a large number of posttranslational modifications whose sequential or combinatorial action affects chromatin structure and genome function. We identified acetylation at Lys-36 in histone H3 (H3K36ac) as a new chromatin modification in plants. The H3K36ac modification is evolutionary conserved in seed plants, including the gymnosperm Norway spruce (Picea abies) and the angiosperms rice (Oryza sativa), tobacco (Nicotiana tabacum), and Arabidopsis (Arabidopsis thaliana). In Arabidopsis, H3K36ac is highly enriched in euchromatin but not in heterochromatin. Genome-wide chromatin immunoprecipitation sequencing experiments revealed that H3K36ac peaks at the 5' end of genes, mainly on the two nucleosomes immediately distal to the transcription start site, independently of gene length. H3K36ac overlaps with H3K4me3 and the H2A.Z histone variant. The histone acetyl transferase GCN5 and the histone deacetylase HDA19 are required for H3K36ac homeostasis. H3K36ac and H3K36me3 show negative crosstalk, which is mediated by GCN5 and the histone methyl transferase SDG8. Although H3K36ac is associated with gene activity, we did not find a linear relationship between H3K36ac and transcript levels, suggesting that H3K36ac is a binary indicator of transcription. PMID:26764380

  5. AC Motor Drive Fed by Renewable Energy Sources with PWM

    Directory of Open Access Journals (Sweden)

    J. Pavalam

    2014-01-01

    Full Text Available In this fast aproaching nature of technology the ned of Electricity becomes a mandatory in developing technology. The ned of Electricity increases the power demand where the power demand met by the conventional sources of energy has some disadvantage of polution, this disadvantage can be decreased by the use of the Renewable energy sources like Fuel Cel and available solar energy. When a FUEL cel produces AC power, basicaly two stages are required for conversion first a bosting stage and second is inversion stage. In this paper the Bost inverter topology is achieved where in the conventional methods the normal DC - AC power conversion method is used where as in this paper the PWM based DC - AC inverter has ben used which is useful in reducing the harmonics in the output of the Inverter. The voltage controled output is produced in the bost inverter the curent controled output is taken from dc-dc bidirectional converter. The Fuel cel canot be relied as a whole so a Solar PV module is conected acros the Load so while the Sunlight days the PV arays generate power and in the night time the Fuel cel is used to generate power for the load. Since, the Fuel cel and PV arays can generate power in Partial load they are prefered than any other sources. When the output from the Solar PV aray is low or when the sunlight available is not eficient in generating the power a automatic switch over is provided in the junction betwen the Solar PV aray and Fuel cel so that whenever it hapens the switch automaticaly switch over to another source. The simulation results are presented to confirm the operational feature of the proposed system.

  6. Concurrent Electroencephalography Recording During Transcranial Alternating Current Stimulation (tACS).

    Science.gov (United States)

    Fehér, Kristoffer D; Morishima, Yosuke

    2016-01-01

    Oscillatory brain activities are considered to reflect the basis of rhythmic changes in transmission efficacy across brain networks and are assumed to integrate cognitive neural processes. Transcranial alternating current stimulation (tACS) holds the promise to elucidate the causal link between specific frequencies of oscillatory brain activity and cognitive processes. Simultaneous electroencephalography (EEG) recording during tACS would offer an opportunity to directly explore immediate neurophysiological effects of tACS. However, it is not trivial to measure EEG signals during tACS, as tACS creates a huge artifact in EEG data. Here we explain how to set up concurrent tACS-EEG experiments. Two necessary considerations for successful EEG recording while applying tACS are highlighted. First, bridging of the tACS and EEG electrodes via leaking EEG gel immediately saturates the EEG amplifier. To avoid bridging via gel, the viscosity of the EEG gel is the most important parameter. The EEG gel must be viscous to avoid bridging, but at the same time sufficiently fluid to create contact between the tACS electrode and the scalp. Second, due to the large amplitude of the tACS artifact, it is important to consider using an EEG system with a high resolution analog-to-digital (A/D) converter. In particular, the magnitude of the tACS artifact can exceed 100 mV at the vicinity of a stimulation electrode when 1 mA tACS is applied. The resolution of the A/D converter is of importance to measure good quality EEG data from the vicinity of the stimulation site. By following these guidelines for the procedures and technical considerations, successful concurrent EEG recording during tACS will be realized. PMID:26862814

  7. Overexpressing mouse model demonstrates the protective role of Muc5ac in the lungs.

    Science.gov (United States)

    Ehre, Camille; Worthington, Erin N; Liesman, Rachael M; Grubb, Barbara R; Barbier, Diane; O'Neal, Wanda K; Sallenave, Jean-Michel; Pickles, Raymond J; Boucher, Richard C

    2012-10-01

    MUC5AC, a major gel-forming mucin expressed in the lungs, is secreted at increased rates in response to infectious agents, implying that mucins exert a protective role against inhaled pathogens. However, epidemiological and pathological studies suggest that excessive mucin secretion causes airways obstruction and inflammation. To determine whether increased MUC5AC secretion alone produces airway obstruction and/or inflammation, we generated a mouse model overexpressing Muc5ac mRNA ~20-fold in the lungs, using the rCCSP promoter. The Muc5ac cDNA was cloned from mouse lungs and tagged internally with GFP. Bronchoalveolar lavage fluid (BALF) analysis demonstrated an approximate 18-fold increase in Muc5ac protein, which formed high-molecular-weight polymers. Histopathological studies and cell counts revealed no airway mucus obstruction or inflammation in the lungs of Muc5ac-transgenic (Muc5ac-Tg) mice. Mucus clearance was preserved, implying that the excess Muc5ac secretion produced an "expanded" rather than more concentrated mucus layer, a prediction confirmed by electron microscopy. To test whether the larger mucus barrier conferred increased protection against pathogens, Muc5ac-Tg animals were challenged with PR8/H1N1 influenza viruses and showed significant decreases in infection and neutrophilic responses. Plaque assay experiments demonstrated that Muc5ac-Tg BALF and purified Muc5ac reduced infection, likely via binding to α2,3-linked sialic acids, consistent with influenza protection in vivo. In conclusion, the normal mucus transport and absence of a pulmonary phenotype in Muc5ac-Tg mice suggests that mucin hypersecretion alone is not sufficient to trigger luminal mucus plugging or airways inflammation/goblet cell hyperplasia. In contrast, increased Muc5ac secretion appears to exhibit a protective role against influenza infection. PMID:23012413

  8. Laser-modulated ac measurement of high temperature thermopower

    Institute of Scientific and Technical Information of China (English)

    Fan Zhen-Jun; Zhang Dian-Lin

    2005-01-01

    An experimental set-up for ac-measurement of thermopower between room temperature and 1200K by using modulated laser-heating has been developed. The method shows many advantages compared with the conventional dc-measurements: convenience, applicability to small samples, possibility to measure the anisotropy of single crystals,and capability to continuously trace the temperature dependence of thermopower. The thermopower of a very short piece of pure Pt was measured with the present set-up to test the reliability and accuracy of our new method.

  9. A new AC driving circuit for a top emission AMOLED

    Institute of Scientific and Technical Information of China (English)

    Zhang Yongwen; Chen Wenbin; Liu Haohan

    2013-01-01

    A new voltage programmed pixel circuit with top emission design for active-matrix organic lightemitting diode (AMOLED) displays is presented and verified by HSPICE simulations.The proposed pixel circuit consists of five poly-Si TFTs,and can effectively compensate for the threshold voltage variation of the driving TFT.Meanwhile,the proposed pixel circuit offers an AC driving mode for the OLED by the two adjacent pulse voltage sources,which can suppress the degradation of the OLED.Moreover,a high contrast ratio can be achieved by the proposed pixel circuit since the OLED does not emit any light except for the emission period.

  10. Propiedades acústicas de los paneles de carrizo

    Directory of Open Access Journals (Sweden)

    Díaz, César

    2012-03-01

    Full Text Available Reed is a plant species very similar to common cane which is widespread all over the Earth. It is an ecological and sustainable material which is low-cost, aesthetically attractive, easy to obtain and install, and can be used in different construction systems. This work analyses the acoustic properties of reed panels from the point of view of sound absorption and sound insulation against airborne noise, according to the corresponding EN ISO standards. The experimental results obtained point to the conclusion that reed panels are suitable construction systems for controlling reverberant sound within a space, and that the sound reduction index values for different thicknesses of reed panels, or reed panels used in combination with wood particle boards, demonstrate the possibility of using them in construction as an element on the facades and roofs of buildings and for interior partitions.

    El carrizo es una especie vegetal, parecida a la caña común, que se encuentra ampliamente distribuida en la superficie terrestre. Es un material ecológico y sostenible de bajo coste, estéticamente aceptable, fácil de obtener y colocar, que permite generar diferentes sistemas constructivos. En este trabajo se analizan las propiedades acústicas de los paneles de carrizo en lo referente a la absorción acústica y al aislamiento acústico a ruido aéreo, para ello se han aplicado los procedimientos de las normas EN ISO correspondientes. De los resultados experimentales obtenidos se concluye que los paneles de carrizo son unos sistemas constructivos adecuados para el control del sonido reverberante en un recinto y que los valores del índice de reducción acústica de paneles de diferentes espesores o en combinación con tableros de partículas de madera muestran la posibilidad de utilizarlos en la edificación como elemento de fachada, en cubiertas de edificios y particiones interiores.

  11. Topological Instabilities in ac-Driven Bosonic Systems.

    Science.gov (United States)

    Engelhardt, G; Benito, M; Platero, G; Brandes, T

    2016-07-22

    Under nonequilibrium conditions, bosonic modes can become dynamically unstable with an exponentially growing occupation. On the other hand, topological band structures give rise to symmetry protected midgap states. In this Letter, we investigate the interplay of instability and topology. Thereby, we establish a general relation between topology and instability under ac driving. We apply our findings to create dynamical instabilities which are strongly localized at the boundaries of a finite-size system. As these localized instabilities are protected by symmetry, they can be considered as topological instabilities. PMID:27494478

  12. AC Power Local Network with Multiple Power Routers

    Directory of Open Access Journals (Sweden)

    Ryo Takahashi

    2013-12-01

    Full Text Available Controlling power flow and achieving appropriate matching between power sources and loads according to the quality of energy is expected to be one of the approaches to reduce wasted energy consumption. A power router, proposed recently, has the capability of realizing circuit switching in a power distribution network. This study focuses on the feasibility of an AC power routing network system composed of multiple power routers. To evaluate the feasibility, we experimentally confirm the circuit switching operation of the parallel and series configurations of the power routers, so that the network system can be designed by the combination of parallel and series configurations.

  13. Silicon (BSFR) solar cell AC parameters at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, R Anil; Suresh, M.S. [ISRO Satellite Center, Bangalore- 560 017 (India); Nagaraju, J. [Solar Energy and Thermodynamic Laboratory, Department of Instrumentation, Indian Institute of Science, Bangalore- 560 012 (India)

    2005-01-31

    The AC parameters of back surface field reflected (BSFR) silicon solar cell are measured at different cell temperatures (198-348K) both in forward and reverse bias under dark condition using impedance spectroscopy technique. It is found that cell capacitance increases with temperature whereas cell resistance decreases, in forward bias voltage. Beyond maximum power point voltage, the cell inductance (0.28{mu}H) is measured, as the inductive reactance is comparable with cell series resistance. The measured cell parameters (cell capacitance, dynamic resistance, etc) are used to calculate the mean carrier lifetime and diode factor at different cell temperatures.

  14. GaAs/Ge solar cell AC parameters under illumination

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, R.A.; Suresh, M.S. [ISRO Satellite Center, Bangalore (India); Nagaraju, J. [Indian Institute of Science, Bangalore (India). Department of Instrumentation, Solar Energy Laboratory

    2004-04-01

    The ac parameters of GaAs/Ge solar cell were measured under illumination at different cell temperatures using impedance spectroscopy technique. They are compared with the dark measurements. It is found that the cell capacitance is higher and cell resistance is lower under illumination than in dark for all cell terminal voltages. The cell capacitances at the corresponding maximum power point voltage (terminal) do not vary with temperature where as the cell resistance decreases. The cell capacitance under illumination is estimated from the dark cell capacitance and it is in good agreement with the measured illumination data. (author)

  15. SCR-controlled digitally programmable ac power supply

    International Nuclear Information System (INIS)

    A digitally programmable ac power supply was designed, built, and tested. Its output voltage may be programmed to be any one of 41 equally spaced voltage levels and may be switched from any level to any other level in one 60-Hz period (16.67 ms). The switching of voltages is accomplished by turning on and off individual silicon-controlled rectifiers (SCR's) in a network of 14 pairs of SCR's. The concept of this power supply is readily extendable to more or fewer voltage levels or higher or lower output currents or voltages than the particular supply described

  16. Impedance Localization Measurements using AC Dipoles in the LHC

    CERN Document Server

    Biancacci, Nicolo; Papotti, Giulia; Persson, Tobias; Salvant, Benoit; Tomás, Rogelio

    2016-01-01

    The knowledge of the LHC impedance is of primary importance to predict the machine performance and allow for the HL-LHC upgrade. The developed impedance model can be benchmarked with beam measurements in order to assess its validity and limit. This is routinely done, for example, moving the LHC collimator jaws and measuring the induced tune shift. In order to localize possible unknown impedance sources, the variation of phase advance with intensity between beam position monitors can be measured. In this work we will present the impedance localization measurements performed at injection in the LHC using AC dipoles as exciter as well as the underlying theory.

  17. Power Electronic Transformer based Three-Phase PWM AC Drives

    Science.gov (United States)

    Basu, Kaushik

    A Transformer is used to provide galvanic isolation and to connect systems at different voltage levels. It is one of the largest and most expensive component in most of the high voltage and high power systems. Its size is inversely proportional to the operating frequency. The central idea behind a power electronic transformer (PET) also known as solid state transformer is to reduce the size of the transformer by increasing the frequency. Power electronic converters are used to change the frequency of operation. Steady reduction in the cost of the semiconductor switches and the advent of advanced magnetic materials with very low loss density and high saturation flux density implies economic viability and feasibility of a design with high power density. Application of PET is in generation of power from renewable energy sources, especially wind and solar. Other important application include grid tied inverters, UPS e.t.c. In this thesis non-resonant, single stage, bi-directional PET is considered. The main objective of this converter is to generate adjustable speed and magnitude pulse width modulated (PWM) ac waveforms from an ac or dc grid with a high frequency ac link. The windings of a high frequency transformer contains leakage inductance. Any switching transition of the power electronic converter connecting the inductive load and the transformer requires commutation of leakage energy. Commutation by passive means results in power loss, decrease in the frequency of operation, distortion in the output voltage waveform, reduction in reliability and power density. In this work a source based partially loss-less commutation of leakage energy has been proposed. This technique also results in partial soft-switching. A series of converters with novel PWM strategies have been proposed to minimize the frequency of leakage inductance commutation. These PETs achieve most of the important features of modern PWM ac drives including 1) Input power factor correction, 2) Common

  18. Ac superconducting articles and a method for their manufacture

    International Nuclear Information System (INIS)

    A novel ac superconducting article is described comprising a composite structure having a superconducting surface along with a high thermally conductive material wherein the superconducting surface has the desired physical properties, geometrical shape and surface finish produced by the steps of depositing a superconducting layer upon a substrate having a predetermined surface finish and shape which conforms to that of the desired superconducting article, depositing a supporting layer of material on the superconducting layer and removing the substrate, the surface of the superconductor being a replica of the substrate surface. (auth)

  19. Spectroscopic AC susceptibility imaging (sASI) of magnetic nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ficko, Bradley W., E-mail: Bradley.W.Ficko@Dartmouth.edu; Nadar, Priyanka M.; Diamond, Solomon G.

    2015-02-01

    This study demonstrates a method for alternating current (AC) susceptibility imaging (ASI) of magnetic nanoparticles (mNPs) using low cost instrumentation. The ASI method uses AC magnetic susceptibility measurements to create tomographic images using an array of drive coils, compensation coils and fluxgate magnetometers. Using a spectroscopic approach in conjunction with ASI, a series of tomographic images can be created for each frequency measurement set and is termed sASI. The advantage of sASI is that mNPs can be simultaneously characterized and imaged in a biological medium. System calibration was performed by fitting the in-phase and out-of-phase susceptibility measurements of an mNP sample with a hydrodynamic diameter of 100 nm to a Brownian relaxation model (R{sup 2}=0.96). Samples of mNPs with core diameters of 10 and 40 nm and a sample of 100 nm hydrodynamic diameter were prepared in 0.5 ml tubes. Three mNP samples were arranged in a randomized array and then scanned using sASI with six frequencies between 425 and 925 Hz. The sASI scans showed the location and quantity of the mNP samples (R{sup 2}=0.97). Biological compatibility of the sASI method was demonstrated by scanning mNPs that were injected into a pork sausage. The mNP response in the biological medium was found to correlate with a calibration sample (R{sup 2}=0.97, p<0.001). These results demonstrate the concept of ASI and advantages of sASI. - Highlights: • Development of an AC susceptibility imaging model. • Comparison of AC susceptibility imaging (ASI) and susceptibility magnitude imaging (SMI). • Demonstration of ASI and spectroscopic ASI (sASI) using three different magnetic nanoparticle types. • SASI scan separation of three different magnetic nanoparticles samples using 5 spectroscopic frequencies. • Demonstration of biological feasibility of sASI.

  20. Photovoltaic Simplified Boost Z Source Inverter for Ac Module Applications

    Directory of Open Access Journals (Sweden)

    J. Sam Alaric

    2014-08-01

    Full Text Available This study mainly proposed PV z source boost inverter used to boundary grid or ac module applications. Separate types of converter used for solar system due to its current lagging, here capacitor multiplier based boost converter introduced for maintain the current lagging and voltage gain. Here, the switched inductor z source inverter implemented for grid interface. Proposed z source inverter is controlled by pulse width modulation. A simplified capacitor multiplier controlled by continuous conduction mode, A detailed topology analysis and a generalized discussion are given. The multiplier boost converter has the merits of maintain voltage level and reducing cost and current lagging. Simulation results are implemented and analysis MATLAB software.

  1. A Multi-channel AC Power Supply Controller

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A multi-channel AC power Supply controler developed recently by us was introdueed briefty in this paper.This controller is a computer controlled multi-electronic-switch device.The controller contains 16 independent channels in a standard box(440W×405D×125H mm).There is an electronic switch in each channel,the rated load power is≤1 kW.The main function of the controller is to set the state of electronic switch(ON/OFF)

  2. AC dipole based optics measurement and correction at RHIC

    CERN Document Server

    Shen, X; Bai, M; White, S; Robert-Domolaize, G; Luo, Y; Marusic, A; Tomas, R

    2013-01-01

    Independent component analysis (ICA) was applied to the AC dipole based optics measurement at RHIC to extract beta functions as well as phase advances at each BPM. Existence of excessive beta-beat was observed in both rings of RHIC at polarized proton store energy. A unique global optics correction scheme was then developed and tested successfully during the RHIC polarized proton run in 2013. The feasibility of using horizontal closed orbit bump at sextupole for arc beta-beat correction was also demonstrated.

  3. Construction of Tunnel Diode Oscillator for AC Impedance Measurement

    Science.gov (United States)

    Shin, J. H.; Kim, E.

    2014-03-01

    We construct a tunnel diode oscillator (TDO) to study electromagnetic response of a superconducting thin film. Highly sensitive tunnel diode oscillators allow us to detect extremely small changes in electromagnetic properties such as dielectric constant, ac magnetic susceptibility and magnetoresistance. A tunnel diode oscillator is a self-resonant oscillator of which resonance frequency is primarily determined by capacitance and inductance of a resonator. Amplitude of the signal depends on the quality factor of the resonator. The change in the impedance of the sample electromagnetic coupled to one of inductors in the resonator alters impedance of the inductor, and leads to the shift in the resonance frequency and the change of the amplitude.

  4. Warning: safety risk with some Apple AC Wall Plug Adapters

    CERN Multimedia

    CERN IT department

    2016-01-01

    Dear Mac and iOS Users, Apple has determined that some of its two prong Apple AC wall plug adapters may break and create a risk of electrical shock.   CERN users can now exchange their affected Apple wall plug adapters at the Service Desk. To find out if your adapter is affected and for any further information concerning the procedure to follow to exchange it, please check the following URL: https://cern.service-now.com/service-portal/view-outage.do?n=OTG0028639.

  5. Total synthesis and allelopathic activity of cytosporones A-C

    Energy Technology Data Exchange (ETDEWEB)

    Zamberlam, Charles E.M.; Meza, Alisson; Lima, Denis P. de; Beatriz, Adilson [Centro de Ciencias Exatas e Tecnologia, Universidade Federal de Mato Grosso do Sul, Campo Grande, MS (Brazil); Leite, Carla Braga; Marques, Maria Rita [Centro de Ciencias Biologicas e da Saude, Universidade Federal de Mato Grosso do Sul, Campo Grande, MS (Brazil)

    2012-07-01

    The search for efficient, environmentally friendly herbicides has been the focus of numerous studies on the organic synthesis of compounds isolated from natural sources. Cytosporones, which are phenolic lipids isolated from fungi, exhibit noteworthy biological properties. This paper reports the preparation of cytosporones A-C from the same starting material through a short synthetic route, with good yields. All compounds were tested for allelopathic activity on lettuce (Lactuca sativa L) seeds. Cytosporone A and its methylated precursor showed remarkable allelopathic activity, inhibiting seed germination and plantule growth. (author)

  6. Glutathione preconditioning attenuates Ac-LDL-induced macrophage apoptosis via protein kinase C-dependent Ac-LDL trafficking.

    Science.gov (United States)

    Rosenson-Schloss, Rene S; Chnari, Evangelia; Brieva, Thomas A; Dang, Anh; Moghe, Prabhas V

    2005-01-01

    Oxidized low-density lipoprotein (ox-LDL) incorporation into intimally resident vascular cells via scavenger receptors marks one of the early steps in atherosclerosis. Cellular apoptotic damage results from two major serial intracellular events: the binding and scavenger receptor-mediated uptake of oxidizable lipoproteins and the intracellular oxidative responses of accumulated lipoproteins. Most molecular approaches to prevent apoptotic damage have focused on singular events within the cascade of lipoprotein trafficking. To identify a multifocal strategy against LDL-induced apoptosis, we evaluated the role of cellular preconditioning by glutathione-ethyl ester (GSH-Et), a native redox regulator, in the prevention of the uptake and apoptotic effects of an oxidizable scavenger receptor-specific ligand, acetylated low-density lipoprotein (Ac-LDL). Our results indicate that GSH-Et-mediated protein kinase C (PKC) pathway modulation regulates Ac-LDL binding and incorporation into GSH-Et preconditioned cells and subsequently delays reactive oxygen intermediate generation and apoptotic conversion. The GSH-Et protective effects on apoptosis and Ac-LDL binding were reversed by calphostin C, a PKC inhibitor, and were accompanied by an increase in PKC phosphorylation. However, the rate of reactive oxygen intermediate accumulation was not increased following calphostin C treatment, suggesting that GSH-Et may play an important nonreactive oxygen-intermediate-based protective role in regulating apoptotic dynamics. Overall, we report on the novel role for GSH-Et preconditioning as a molecular strategy to limit lipoprotein entry into the cells, which presents a proactive modality to prevent cellular apoptosis in contrast with the prevalent antioxidant approaches that treat damage retroactively. PMID:15618124

  7. System and method for determining stator winding resistance in an AC motor

    Science.gov (United States)

    Lu, Bin; Habetler, Thomas G.; Zhang, Pinjia; Theisen, Peter J.

    2011-05-31

    A system and method for determining stator winding resistance in an AC motor is disclosed. The system includes a circuit having an input connectable to an AC source and an output connectable to an input terminal of an AC motor. The circuit includes at least one contactor and at least one switch to control current flow and terminal voltages in the AC motor. The system also includes a controller connected to the circuit and configured to modify a switching time of the at least one switch to create a DC component in an output of the system corresponding to an input to the AC motor and determine a stator winding resistance of the AC motor based on the injected DC component of the voltage and current.

  8. Phonon-Induced Electron-Hole Excitation and ac Conductance in Molecular Junction

    Science.gov (United States)

    Ueda, Akiko; Utsumi, Yasuhiro; Imamura, Hiroshi; Tokura, Yasuhiro

    2016-04-01

    We investigate the linear ac conductance of molecular junctions under a fixed dc bias voltage in the presence of an interaction between a transporting electron and a single local phonon in a molecule with energy ω0. The electron-phonon interaction is treated by the perturbation expansion. The ac conductance as a function of the ac frequency ωac decreases or increases compared with the noninteracting case depending on the magnitude of the dc bias voltage. Furthermore, a dip emerges at ωac ˜ 2ω0. The dip originates from the modification of electron-hole excitation by the ac field, which cannot be obtained by treating the phonon in the linear regime of a classical forced oscillation.

  9. Three-phase AC-AC power converters based on matrix converter topology matrix-reactance frequency converters concept

    CERN Document Server

    Szczesniak, Pawel

    2013-01-01

    AC voltage frequency changes is one of the most important functions of solid state power converters. The most desirable features in frequency converters are the ability to generate load voltages with arbitrary amplitude and frequency, sinusoidal currents and voltages waveforms; the possibility of providing unity power factor for any load; and, finally, a simple and compact power circuit. Over the past decades, a number of different frequency converter topologies have appeared in the literature, but only the converters with either a voltage or current DC link are commonly used in industrial app

  10. SQUIDs De-fluxing Using a Decaying AC Magnetic Field

    Energy Technology Data Exchange (ETDEWEB)

    Matlashov, Andrei Nikolaevich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Semenov, Vasili Kirilovich [State Univ. of New York (SUNY), Plattsburgh, NY (United States); Anderson, Bill [Senior Scientific, LLC, Albuquerque, NM (United States)

    2016-06-08

    Flux trapping is the Achilles’ heel of all superconductor electronics. The most direct way to avoid flux trapping is a prevention of superconductor circuits from exposure to magnetic fields. Unfortunately this is not feasible if the circuits must be exposed to a strong DC magnetic field even for a short period of time. For example, such unavoidable exposures take place in superparamagnetic relaxation measurements (SPMR) and ultra-low field magnetic resonance imaging (ULF MRI) using unshielded thin-film SQUID-based gradiometers. Unshielded SQUIDs stop working after being exposed to DC magnetic fields of only a few Gauss in strength. In this paper we present experimental results with de-fluxing of planar thin-film LTS SQUID-based gradiometers using a strong decaying AC magnetic field. We used four commercial G136 gradiometers for SPMR measurements with up to a 10 mT magnetizing field. Strong 12.9 kHz decaying magnetic field pulses reliably return SQUIDs to normal operation 50 ms after zeroing the DC magnetizing field. This new AC de-fluxing method was also successfully tested with seven other different types of LTS SQUID sensors and has been shown to dissipate extremely low energy.

  11. AcMNPV As A Model for Baculovirus DNA Replication

    Institute of Scientific and Technical Information of China (English)

    Eric B. Carstens

    2009-01-01

    Baculoviruses were first identified as insect-specific pathogens, and it was this specificity that lead to their use as safe, target specific biological pesticides. For the past 30 years, AcMNPV has served as the subject of intense basic molecular research into the baculovirus infectious cycle including the interaction of the virus with a continuous insect cell line derived from Spodoptera frugiperda. The studies on baculoviruese have led to an in-depth understanding of the physical organization of the viral genomes including many complete genomic sequences, the time course of gene expression, and the application of this basic research to the use of baculoviruses not only as insecticides, but also as a universal eukaryotic protein expression system, and a potential vector in gene therapy. A great deal has also been discovered about the viral genes required for the replication of the baculovirus genome, while much remains to be learned about the mechanism of viral DNA replication. This report outlines the current knowledge of the factors involved in baculovirus DNA replication, using data on AcMNPV as a model for most members of the Baculoviridae.

  12. Memory Convergence and Optimization with Fuzzy PSO and ACS

    Directory of Open Access Journals (Sweden)

    Subhash C. Pandey

    2008-01-01

    Full Text Available Associative neural memories are models of biological phenomena that allow for the storage of pattern associations and the retrieval of the desired output pattern upon presentation of a possibly noisy or incomplete version of an input pattern. In this study, we introduce fuzzy swarm particle optimization technique for convergence of associative neural memories based on fuzzy set theory. A Fuzzy Particle Swarm Optimization (FPSO consists of clustering of swarm's particle by applying fuzzy c-mean algorithm to attain the neighborhood best. We present a singular value decomposition method for the selection of efficient rule from a given rule base required to attain the global best. Finally, we illustrate the proposed method by virtue of some examples. Further, ant colony system ACS algorithm is used to study the Symmetric Traveling Salesman Problem TSP. The optimum parameters for this algorithm have to found by trial and error. The ACS parameters working in a designed subset of TSP instances has also been optimized by virtue of Particle Swarm Optimization PSO.

  13. ACS after Servicing Mission 4: The WFC Optimization Campaign

    Science.gov (United States)

    Golimowski, David; Cheng, Ed; Loose, Markus; Sirianni, Marco; Lupie, Olivia; Smith, Linda; Arslanian, Steve; Boyce, Kevin; Chapman, George; Chiaberge, Marco; Desjardins, Tyler; Dye, Darryl; Grogin, Norman; Lim, Pey Lian; Lucas, Ray; Maybhate, Aparna; Mil, Kathleen; Mutchler, Max; Ricardo, Raphael; Scott, Barbara; Serrano, Beverly; Suchkov, Anatoly; Waczynski, Augustyn; Welty, Alan; Wheeler, Thomas; Wilson, Erin

    2011-07-01

    The ACS CCD Electronics Box Replacement (CEB-R) installed during SM4 features a Teledyne SIDECAR ASIC that permits optimization of the WFC via adjustment of CCD clock voltages, bias voltages, and pixel transmission timing. A built-in oscilloscope mode allows sensing of the analog signal from each output amplifier. An on-orbit campaign to optimize the performance of the WFC was undertaken at the start of the SMOV period. Initial tests with pre-SM4 default voltages and timing patterns showed that WFC's performance matches or exceeds its pre-failure levels, notwithstanding the expected increases in dark current and hot pixels and the decline in charge-transfer efficiency due to prolonged exposure to HST's radiation environment. The WFC2 CCD exhibited anomalous behavior when operated with nondefault settings of its amplifiers' reset-drain voltage (VOD). The CCD again displayed normal behavior when VOD was restored to its default setting. Consequently, the Optimization Campaign was truncated after two iterations, and ACS science operations commenced with the pre-SM4 default configuration.

  14. ACS after SM4: New Life for an Old Workhorse

    Science.gov (United States)

    Golimowski, David; Anderson, Jay; Armstrong, Amber; Arslanian, Steve; Bedin, Luigi; Bohlin, Ralph; Boyce, Kevin; Chapman, George; Cheng, Edward; Chiaberge, Marco; Cox, Colin; Desiardins, Tyler; Dye, Darryl; Ellis, Tracy; Ferguson, Brian; Fruchter, Andrew; Grogin, Norman; Lim, Pey Lian; Loose, Markus; Lucas, Ray; Lupie, Olivia; Mack, Jennifer; Maybhate, Aparna; Mil, Kathleen; Mutchler, Max; Ricardo, Raphael; Scott, Barbara; Serrano, Beverly; Sirianni, Marco; Smith, Linda; Suchkov, Anatoly A.; Waczynski, Augustyn; Welty, Alan; Wheeler, Thomas; Wilson, Erin

    2010-07-01

    The ACS CCD Electronics Box Replacement (CEB-R) installed during SM4 features a Teledyne SIDECAR ASIC that permits optimization of the WFC via adjustment of CCD clock voltages, bias voltages, and pixel transmission timing. An on-orbit campaign to optimize the performance of the WFC was undertaken at the start of the SMOV period. Initial tests with pre-SM4 default voltages and timing patterns showed that WFC's performance matches or exceeds its pre-failure levels, notwithstanding the expected increases in dark current and hot pixels and the decline in charge-transfer efficiency due to prolonged exposure to HST's radiation environment. One WFC CCD exhibited anomalous behavior when operated with nondefault settings of its reset drain voltage. Consequently, the optimization campaign was truncated after two iterations, and ACS science operations commenced with the pre-SM4 default configuration. Several artifacts attributed to the CEB-R appear in post-SM4 WFC images: large-scale but stable bias gradients, low-level but temporally variable horizontal stripes, a signal-dependent bias shift, and amplifier crosstalk. STScI has developed algorithms for the correction or mitigation of these electronic artifacts as well as for the restoration of images affected by continuously degrading CTE. Standalone correction packages are now or will soon be publicly available. These packages will be incorporated into the calacs package of the OPUS data pipeline by September 2011.

  15. Perfecting the Photometric Calibration of the ACS CCD Cameras

    Science.gov (United States)

    Bohlin, Ralph C.

    2016-09-01

    Newly acquired data and improved data reduction algorithms mandate a fresh look at the absolute flux calibration of the charge-coupled device cameras on the Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS). The goals are to achieve a 1% accuracy and to make this calibration more accessible to the HST guest investigator. Absolute fluxes from the CALSPEC1 database for three primary hot 30,000–60,000K WDs define the sensitivity calibrations for the Wide Field Channel (WFC) and High Resolution Channel (HRC) filters. The external uncertainty for the absolute flux is ˜1%, while the internal consistency of the sensitivities in the broadband ACS filters is ˜0.3% among the three primary WD flux standards. For stars as cool as K type, the agreement with the CALSPEC standards is within 1% at the WFC1-1K subarray position, which achieves the 1% precision goal for the first time. After making a small adjustment to the filter bandpass for F814W, the 1% precision goal is achieved over the full F814W WFC field of view for stars of K type and hotter. New encircled energies and absolute sensitivities replace the seminal results of Sirianni et al. that were published in 2005. After implementing the throughput updates, synthetic predictions of the WFC and HRC count rates for the average of the three primary WD standard stars agree with the observations to 0.1%.

  16. Accelerated life ac conductivity measurements of CRT oxide cathodes

    Science.gov (United States)

    Hashim, A. A.; Barratt, D. S.; Hassan, A. K.; Nabok, A.

    2006-07-01

    The ac conductivity measurements have been carried out for the activated Ba/SrO cathode with additional 5% Ni powder for every 100 h acceleration life time at the temperature around 1125 K. The ac conductivity was studied as a function of temperature in the range 300-1200 K after conversion and activation of the cathode at 1200 K for 1 h in two cathodes face to face closed configuration. The experimental results prove that the hopping conductivity dominate in the temperature range 625-770 K through the traps of the WO 3 associate with activation energy Ea = 0.87 eV, whereas from 500-625 K it is most likely to be through the traps of the Al 2O 3 with activation energy of Ea = 1.05 eV. The hopping conductivity at the low temperature range 300-500 K is based on Ni powder link with some Ba contaminants in the oxide layer stricture which indicates very low activation energy Ea = 0.06 eV.

  17. SOLAR TO AC POWER SOURCE FOR REMOTE AREAS USING SEIG

    Directory of Open Access Journals (Sweden)

    MEHMET AKBABA

    2012-02-01

    Full Text Available Photovoltaic generators (PVG are increasingly used to provide electricity in remote areas. However, in many applications the DC generated electricity by a PVG need to be converted to AC. Traditionally DC to AC inverters have been widely used for this purpose. In this paper, a different system is proposed in which a self excited induction generator (SEIG driven by a permanent magnet DC motor (DCM and powered from a PVG through a maximum power point tracker (MPPT are used. A step-up chopper is utilized as an MPPT unit. The proposed system is modelled in time domain, and a detailed transient and steady-state analysis are presented. The main reason behind analyzing the system in the time domain is because of the fact that for unknown speeds, the methods developed for steady-state analysis of SEIGs can not be applied. The presented work shows that the full available power of the PVG can be harnessed by selecting suitable values for the duty cycle and the frequency of the step up chopper and the excitation capacitor of the SEIG. It is also shown that with such a combination power utilization efficiency of more than 83% can be achieved.

  18. Long-range response in ac electricity grids.

    Science.gov (United States)

    Jung, Daniel; Kettemann, Stefan

    2016-07-01

    Local changes in the topology of electricity grids can cause overloads far away from the disturbance [D. Witthaut and M. Timme, Eur. Phys. J. B 86, 377 (2013)EPJBFY1434-602810.1140/epjb/e2013-40469-4], making the prediction of the robustness against changes in the topology-for example, caused by power outages or grid extensions-a challenging task. The impact of single-line additions on the long-range response of dc electricity grids has recently been studied [D. Labavić, R. Suciu, H. Meyer-Ortmanns, and S. Kettemann, Eur. Phys. J.: Spec. Top. 223, 2517 (2014)1951-635510.1140/epjst/e2014-02273-0]. By solving the real part of the static ac load flow equations, we conduct a similar investigation for ac grids. In a regular two-dimensional grid graph with cyclic boundary conditions, we find a power law decay for the change of power flow as a function of distance to the disturbance over a wide range of distances. The power exponent increases and saturates for large system sizes. By applying the same analysis to the German transmission grid topology, we show that also in real-world topologies a long-ranged response can be found. PMID:27575148

  19. ACS sampling system: design, implementation, and performance evaluation

    Science.gov (United States)

    Di Marcantonio, Paolo; Cirami, Roberto; Chiozzi, Gianluca

    2004-09-01

    By means of ACS (ALMA Common Software) framework we designed and implemented a sampling system which allows sampling of every Characteristic Component Property with a specific, user-defined, sustained frequency limited only by the hardware. Collected data are sent to various clients (one or more Java plotting widgets, a dedicated GUI or a COTS application) using the ACS/CORBA Notification Channel. The data transport is optimized: samples are cached locally and sent in packets with a lower and user-defined frequency to keep network load under control. Simultaneous sampling of the Properties of different Components is also possible. Together with the design and implementation issues we present the performance of the sampling system evaluated on two different platforms: on a VME based system using VxWorks RTOS (currently adopted by ALMA) and on a PC/104+ embedded platform using Red Hat 9 Linux operating system. The PC/104+ solution offers, as an alternative, a low cost PC compatible hardware environment with free and open operating system.

  20. Long-range response in ac electricity grids

    Science.gov (United States)

    Jung, Daniel; Kettemann, Stefan

    2016-07-01

    Local changes in the topology of electricity grids can cause overloads far away from the disturbance [D. Witthaut and M. Timme, Eur. Phys. J. B 86, 377 (2013), 10.1140/epjb/e2013-40469-4], making the prediction of the robustness against changes in the topology—for example, caused by power outages or grid extensions—a challenging task. The impact of single-line additions on the long-range response of dc electricity grids has recently been studied [D. Labavić, R. Suciu, H. Meyer-Ortmanns, and S. Kettemann, Eur. Phys. J.: Spec. Top. 223, 2517 (2014), 10.1140/epjst/e2014-02273-0]. By solving the real part of the static ac load flow equations, we conduct a similar investigation for ac grids. In a regular two-dimensional grid graph with cyclic boundary conditions, we find a power law decay for the change of power flow as a function of distance to the disturbance over a wide range of distances. The power exponent increases and saturates for large system sizes. By applying the same analysis to the German transmission grid topology, we show that also in real-world topologies a long-ranged response can be found.

  1. Resonant tunneling of interacting electrons in an AC electric field

    International Nuclear Information System (INIS)

    The problem of the effect of electron-electron interaction on the static and dynamic properties of a double-barrier nanostructure (resonant tunneling diode (RTD)) is studied in terms of a coherent tunneling model, which includes a set of Schrödinger and Poisson equations with open boundary conditions. Explicit analytical expressions are derived for dc and ac potentials and reduced (active and reactive) currents in the quasi-classical approximation over a wide frequency range. These expressions are used to analyze the frequency characteristics of RTD. It is shown that the interaction can radically change the form of these expressions, especially in the case of a hysteretic I-V characteristic. In this case, the active current and the ac potentials can increase sharply at both low and high frequencies. For this increase to occur, it is necessary to meet quantum regime conditions and to choose a proper working point in the I-V characteristic of RTD. The possibility of appearance of specific plasma oscillations, which can improve the high-frequency characteristics of RTD, is predicted. It is found that the active current can be comparable with the resonant dc current of RTD

  2. Resonant tunneling of interacting electrons in an AC electric field

    Energy Technology Data Exchange (ETDEWEB)

    Elesin, V. F., E-mail: VFElesin@mephi.ru [National Research Nuclear University MEPhI (Russian Federation)

    2013-11-15

    The problem of the effect of electron-electron interaction on the static and dynamic properties of a double-barrier nanostructure (resonant tunneling diode (RTD)) is studied in terms of a coherent tunneling model, which includes a set of Schrödinger and Poisson equations with open boundary conditions. Explicit analytical expressions are derived for dc and ac potentials and reduced (active and reactive) currents in the quasi-classical approximation over a wide frequency range. These expressions are used to analyze the frequency characteristics of RTD. It is shown that the interaction can radically change the form of these expressions, especially in the case of a hysteretic I-V characteristic. In this case, the active current and the ac potentials can increase sharply at both low and high frequencies. For this increase to occur, it is necessary to meet quantum regime conditions and to choose a proper working point in the I-V characteristic of RTD. The possibility of appearance of specific plasma oscillations, which can improve the high-frequency characteristics of RTD, is predicted. It is found that the active current can be comparable with the resonant dc current of RTD.

  3. Perfecting the Photometric Calibration of the ACS CCD Cameras

    CERN Document Server

    Bohlin, Ralph C

    2016-01-01

    Newly acquired data and improved data reduction algorithms mandate a fresh look at the absolute flux calibration of the CCD cameras on the Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS). The goals are to achieve a 1\\% accuracy and to make this calibration more accessible to the HST guest investigator. Absolute fluxes from the CALSPEC\\footnote{http://www.stsci.edu/hst/observatory/crds/calspec.html} database for three primary hot 30,000--60,000K WDs define the sensitivity calibrations for the WFC and HRC filters. The external uncertainty for the absolute flux is $\\sim$1\\%, while the internal consistency of the sensitivities in the broadband ACS filters is $\\sim$0.3\\% among the three primary WD flux standards. For stars as cool as K type, the agreement with the CALSPEC standards is within 1\\% at the WFC1-1K subarray position, which achieves the 1\\% precision goal for the first time. After making a small adjustment to the filter bandpass for F814W, the 1\\% precision goal is achieved over the full ...

  4. New Sky Flats for HST's ACS/WFC

    Science.gov (United States)

    Lucas, Ray A.; Grogin, Norman A.

    2016-06-01

    We have begun experiments to make new sky flat files for HST's ACS/WFC. Sky flats can be especially useful for deep imaging in such as programs as deep, extragalactic survey programs because they can help to better deal with noise at low levels. Although we also hope to make similar sky flats for some other popular filters including F606W and F814W, we are beginning this experiment with the F435W filter on the ACS/WFC since it is a popular filter in use in many deep extragalactic surveys, and since the bluer filters such as F435W generally have lower throughput and images in that filter are typically noisier than others at some longer mid-optical wavelengths. Initially, although sources will be masked in these images, etc. we are endeavoring to use just post-SM4 F435W images of duration equal to or greater than 800 seconds and which are free of bright stars in order to try and avoid scattered light and sky background color issues as much as possible, although the sky in different images taken at different times and in different directions will likely have some different background levels and color terms in any event. However, our hope is that the final sky flats will be of sufficient S/N to be good calibrators for deep survey programs.

  5. Perfecting the Photometric Calibration of the ACS CCD Cameras

    Science.gov (United States)

    Bohlin, Ralph C.

    2016-09-01

    Newly acquired data and improved data reduction algorithms mandate a fresh look at the absolute flux calibration of the charge-coupled device cameras on the Hubble Space Telescope (HST) Advanced Camera for Surveys (ACS). The goals are to achieve a 1% accuracy and to make this calibration more accessible to the HST guest investigator. Absolute fluxes from the CALSPEC1 database for three primary hot 30,000-60,000K WDs define the sensitivity calibrations for the Wide Field Channel (WFC) and High Resolution Channel (HRC) filters. The external uncertainty for the absolute flux is ˜1%, while the internal consistency of the sensitivities in the broadband ACS filters is ˜0.3% among the three primary WD flux standards. For stars as cool as K type, the agreement with the CALSPEC standards is within 1% at the WFC1-1K subarray position, which achieves the 1% precision goal for the first time. After making a small adjustment to the filter bandpass for F814W, the 1% precision goal is achieved over the full F814W WFC field of view for stars of K type and hotter. New encircled energies and absolute sensitivities replace the seminal results of Sirianni et al. that were published in 2005. After implementing the throughput updates, synthetic predictions of the WFC and HRC count rates for the average of the three primary WD standard stars agree with the observations to 0.1%.

  6. AC2 and AC4 proteins of Tomato yellow leaf curl China virus and Tobacco curly shoot virus mediate suppression of RNA silencing

    Institute of Scientific and Technical Information of China (English)

    CUI Xiaofeng; ZHOU Xueping

    2004-01-01

    Tomato yellow leaf curl China virus Y10 isolate (TYLCCNV-Y10) alone could systemically infect host plants such as Nicotiana benthamiana without symptoms. In contrast, Tobacco curly shoot virus Y35 isolate (TbCSV-Y35) alone induces leaf curl symptoms in N. benthamiana. When inoculated into transgenic N. benthamiana plants expressing GFP gene (line 16c), TYLCCNV-Y10 neither reverses the established GFP silencing nor blocks the onset of GFP silencing. In contrast, TbCSV-Y35 can partially reverse the established GFP silencing and block the onset of GFP silencing in new leaves. In the patch co-infiltration assays, the AC2 and AC4 proteins of TYLCCNV-Y10 and TbCSV-Y35 could suppress local GFP silencing and delay systemic GFP silencing, suggesting that they are suppressors of RNA silencing. Comparison of the accumulation levels of GFP mRNA in the co-infiltration patches showed that Y10 AC2 and Y35 AC2 proteins had similar efficiency for suppression of RNA silencing. However, Y35 AC4 protein functioned as a stronger suppressor of RNA silencing than Y10 AC4 protein. Therefore, the pathogenicity difference between TbCSV-Y35 and TYLCCNV-Y10 may be related to the functional difference in their AC4 proteins.

  7. 直接AC/AC变换器输出电压及电流纹波分析%Analysis of Output Voltage and Current Ripple for Direct AC/AC Converter

    Institute of Scientific and Technical Information of China (English)

    文锋; 赵冉; 刘菁

    2009-01-01

    为解决直接AC/AC交换器的输出纹波计算问题,本文建立了以DC/DC变换器结构为基础的六种AC/AC变换器的理想模型.利用这些理想模型,DC/DC变换器的一般分析方法可方便地引入到AC/AC变换器的分析中,然后,论文以Buck型AC/AC变换器为例,给出其电路输出纹波系数的计算公式.为了证明理论分析的正确性,搭建了实验电路,实验结果与理论计算得到了很好的吻合.

  8. Power Controllability of Three-phase Converter with Unbalanced AC Source

    DEFF Research Database (Denmark)

    Ma, Ke; Chen, Wenjie; Liserre, Marco;

    2015-01-01

    Three-phase DC-AC power converters suffer from power oscillation and overcurrent problems in case of unbalanced AC source voltage that can be caused by grid/generator faults. Existing solutions to handle these problems are properly selecting and controlling the positive and negative sequence...... converter can enable more flexible control targets, achieving better performances in the delivered power and load current when suffering from unbalanced AC voltage....

  9. Power Controllability of Three-phase Converter with Unbalanced AC Source

    DEFF Research Database (Denmark)

    Ma, Ke; Liserre, Marco; Blaabjerg, Frede

    2013-01-01

    Three-phase DC-AC power converters suffer from power oscillation and overcurrentt problems in case of unbalanced AC source voltage that can be caused by grid/generator faults. Existing solutions to handle these problems are properly selecting and controlling the positive and negative sequence...... converter can enable more flexible control targets, achieving better performances in the delivered power and load current when suffering from unbalanced AC sources....

  10. An NPV and AC Analysis of a Stochastic Inventory System with Joint Manufacturing and Remanufacturing

    OpenAIRE

    Laan, Erwin

    2000-01-01

    textabstractWhile the net present value (NPV) approach is widely accepted as the right framework for studying production and inventory control systems, average cost (AC) models are more widely used. For the well known EOQ model it can be veri_ed that (under certain conditions) the AC approach gives near optimal results. This paper investigates whether the same holds for two-source systems with joint manufacturing and remanufacturing. It appears that the performance of the AC approach stands o...

  11. Update History of This Database - AcEST | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us AcEST Update... History of This Database Date Update contents 2013/01/10 Errors found on AcEST Conting data hav...iew/acest/ ) is released. Joomla SEF URLs by Artio About This Database Database Description Download License Update... History of This Database Site Policy | Contact Us Update History of This Database - AcEST | LSDB Archive ...

  12. Overexpressing mouse model demonstrates the protective role of Muc5ac in the lungs

    OpenAIRE

    Ehre, Camille; Worthington, Erin N.; Liesman, Rachael M.; Grubb, Barbara R.; Barbier, Diane; O’Neal, Wanda K; Sallenave, Jean-Michel; Pickles, Raymond J.; Boucher, Richard C.

    2012-01-01

    MUC5AC, a major gel-forming mucin expressed in the lungs, is secreted at increased rates in response to infectious agents, implying that mucins exert a protective role against inhaled pathogens. However, epidemiological and pathological studies suggest that excessive mucin secretion causes airways obstruction and inflammation. To determine whether increased MUC5AC secretion alone produces airway obstruction and/or inflammation, we generated a mouse model overexpressing Muc5ac mRNA ∼20-fold in...

  13. Nonlinear dynamics of Josephson vortices in a film screen under dc and ac magnetic fields

    OpenAIRE

    Sheikhzada, Ahmad; Gurevich, Alexander

    2014-01-01

    We present detailed numerical simulations of Josephson vortices in a long Josephson junction perpendicular to a thin film screen under strong dc and ac magnetic fields. By solving the sine-Gordon equation, we calculated the threshold magnetic field for penetration of fluxons as a function of frequency, and the power dissipated by oscillating fluxons as functions of the ac field amplitude and frequency. We considered the effects of superimposed ac and dc fields, and a bi-harmonic magnetic fiel...

  14. Low-Cost Voltage Zero-Crossing Detector for AC-Grid Applications

    OpenAIRE

    Vorobyov Maxim; Vitols Kristaps

    2014-01-01

    Renewable energy sources and energy storage devices are becoming more popular. Some of them like small hydropower turbines, wind turbines and diesel generators produce AC voltage with different frequency and voltage than the main grid. For them power electronics converters are necessary. Power electronics converters presented in industry use two or three level energy conversion, although direct AC to AC converters exist, but one of the main problems is the switch commutation when current or v...

  15. Equal pulse width chopping control based on plugged pulse principle in three-phase AC/AC system%基于脉冲阻塞原理的三相AC/AC系统等脉宽斩波控制

    Institute of Scientific and Technical Information of China (English)

    郑诗程; 陈玲; 曹小虎

    2011-01-01

    A circuit topology of three-phase AC/AC system is presented,which needs only six power devices to realize the three-phase AC/AC frequency conversion. The traditional phase-shifted control strategy is replaced by the equal pulse width chopping control strategy based on plugged pulse principle to regulate the amplitude and frequency of output voltage separately or simultaneously. The equal pulse width chopping control strategy is analyzed in detail and the mathematic expression of duty cycle is deduced based on the area equivalent rule according to different frequency and amplitude of anticipant output voltage. Under the environment of PSPICE,the three-phase AC/AC system with the equal pulse width chopping control strategy is simulated. Its main circuit and FPGA-based control circuit are designed and tested. The experimental results are consistent with the simulative results,completely same as the theoretical analysis,which verifies the correctness and feasibility of the introduced control strategy.%针对传统的三相AC/AC变频电路特点,提出了一种新的电路拓扑,仅用6个功率器件即可实现三相AC/AC变频功能.提出基于脉冲阻塞原理的等脉宽斩波控制策略,取代传统的移相控制策略施加于该电路拓扑,实现了三相输出电压幅值、频率分别可调或同时可调.对等脉宽斩波控制策略进行了详细的理论分析.根据期望输出电压的不同频率和幅值.利用面积等效原则,推导出相应占空比的数学表达式.在PSPICE环境下根据脉冲阻塞原理.对三相AC/AC系统进行等脉宽斩波控制仿真.并设计了三相AC/AC系统主电路和基于FPGA的控制电路,完成了相关实验.仿真和实验结果一致,与文中的理论分析结果也完全一致,验证了该AC/AC变频控制策略的正确性及可行性.

  16. Alzheimer's Project

    Medline Plus

    Full Text Available ... voluntary health organization in Alzheimer's care, support and research, the Alzheimer's Association has been an active partner in "THE ALZHEIMER'S PROJECT," ... (48 minutes) "Momentum ...

  17. Effect of AC electric fields on the stabilization of premixed bunsen flames

    KAUST Repository

    Kim, Minkuk

    2011-01-01

    The stabilization characteristics of laminar premixed bunsen flames have been investigated experimentally for stoichiometric methane-air mixture by applying AC voltage to the nozzle with the single-electrode configuration. The detachment velocity either at blowoff or partial-detachment has been measured by varying the applied voltage and frequency of AC. The result showed that the detachment velocity increased with the applied AC electric fields, such that the flame could be nozzle-attached even over five times of the blowoff velocity without having electric fields. There existed four distinct regimes depending on applied AC voltage and frequency. In the low voltage regime, the threshold condition of AC electric fields was identified, below which the effect of electric fields on the detachment velocity is minimal. In the moderate voltage regime, the flame base oscillated with the frequency synchronized to AC frequency and the detachment velocity increased linearly with the applied AC voltage and nonlinearly with the frequency. In the high voltage regime, two different sub-regimes depending on AC frequency were observed. For relatively low frequency, the flame base oscillated with the applied AC frequency together with the half frequency and the variation of the detachment velocity was insensitive to the applied voltage. For relatively high frequency, the stabilization of the flame was significantly affected by the generation of streamers and the detachment velocity decreased with the applied voltage. © 2010 Published by Elsevier Inc. on behalf of The Combustion Institute. All rights reserved.

  18. Appeals to AC as a Percentage of Appealable Hearing Level Dispositions

    Data.gov (United States)

    Social Security Administration — Longitudinal report detailing the numbers and percentages of Requests for Review (RR) of hearing level decisions or dismissals filed with the Appeals Council (AC)...

  19. Energy saving measures for automotive air conditioning (AC) system in the tropics

    OpenAIRE

    Subiantoro, Alison; Ooi, Kim Tiow; Stimming, Ulrich

    2014-01-01

    Air conditioning (AC) is an integral component of modern cars in the tropics. However, AC usage in this region consumes a large amount of energy. In conventional internal combustion engine cars, it consumes up to 30% of the fuel, while in battery electric cars, AC may reduce the battery range by up to 40%. Fortunately, there are various ways to improve the efficiency of automotive ACs in the tropics. In this paper, three energy saving measures are discussed. These include a higher indoor temp...

  20. Cabibbo-Suppressed Non-leptonic Decays of Ac and Final State Interaction

    Institute of Scientific and Technical Information of China (English)

    CHEN Shao-Long; GUO Xin-Heng; LI Xue-Qian; WANG Guo-Li

    2003-01-01

    With the diquark structure of Ac, we investigate the branching ratio of Ac → nr+ and pro. The results show that without considering the final state interaction (FSI), the branching ratio of Ac → pπ0 is only of order 10-6 whereas this ratio could reach 10-4 and is at the same order as Ac → nr+ if taking into account the FSI effects. Concrete values depend on phenomenological parameters adopted in the calculations. These branching ratios can be measured in the experiments to come.

  1. Modelling of AC loss in coils made of thin tapes under DC bias current

    OpenAIRE

    Pardo, Enric

    2013-01-01

    Many applications, such as magnets and SMES, are usually charged and discharged under a bias DC current, which may increase the AC loss. For their design, it is necessary to understand and predict the AC loss. This article analises the AC loss in magnet-like coils under DC bias contribution super-imposed to the AC current. The analysis is based on a numerical model that takes the interaction between magnetization currents in all turns into account. The studied example is a stack of 32 pancake...

  2. Harmonics of the AC susceptibility as probes to differentiate the various creep models

    OpenAIRE

    Adesso*, M. G.; Senatore, C.; Polichetti, M.; Pace, S.

    2003-01-01

    We measured the temperature dependence of the 1st and the 3rd harmonics of the AC magnetic susceptibility on some type II superconducting samples at different AC field amplitudes, hAC. In order to interpret the measurements, we computed the harmonics of the AC susceptibility as function of the temperature T, by integrating the non-linear diffusion equation for the magnetic field with different creep models, namely the vortex glass-collective creep (single-vortex, small bundle and large bundle...

  3. Hybrid AC-DC offshore wind power plant topology: optimal design

    OpenAIRE

    Prada Gil, Mikel de; Igualada González, Lucía; Corchero García, Cristina; Gomis Bellmunt, Oriol; Sumper, Andreas

    2015-01-01

    The aim of this paper is to present a hybrid AC-DC offshore wind power plant (OWPP) topology and to optimize its design in order to minimize the OWPP's total cost. This hybrid concept is based on clustering wind turbines and connecting each group to an AC/DC power converter installed on a collector platform which is located between the AC wind turbine array and the HVDC offshore platform. Thereby, individual power converters of each wind turbine are not required, since such AC/DC converters c...

  4. Random sampling of an AC source A tool to teach probabilistic observations

    CERN Document Server

    Chandi, P S; Shankar, R; Singh, R C

    2003-01-01

    An undergraduate level experiment is described to demonstrate the role of probabilistic observations in physics. A capacitor and a DC voltmeter are used to randomly sample an AC voltage source. The resulting probability distribution is analyzed to extract information about the AC source. Different characteristic probability distributions arising from various AC waveforms are calculated and experimentally measured. The reconstruction of the AC waveform is demonstrated from the measured probability distribution under certain restricted circumstances. The results are also compared with a simulated data sample. We propose this as a pedagogical tool to teach probabilistic measurements and their manipulations.

  5. AcEST(EST sequences of Adiantum capillus-veneris and their annotation) - AcEST | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us AcEST AcEST(EST sequence...s of Adiantum capillus-veneris and their annotation) Data detail Data name AcEST(EST sequence...s of Adiantum capillus-veneris and their annotation) Description of data contents EST sequence of A...db/view/archive_acest#en Data acquisition method Capillary sequencer Data analysi...atabases) Number of data entries Adiantum capillus-veneris ESTs: 30,540. Data item Description Clone id Clone ID of EST sequence

  6. La crisis del siglo XII A.C. pueblos del mar y guerra de Troya ca. 1215-1175 A.C.

    OpenAIRE

    Mederos Martín, Alfredo

    2007-01-01

    Los ataques de los Pueblos del Mar se produjeron en dos momentos diferentes, separados por 32 años, ca. 1208 y ca. 1176 a.C., y fueron efectos colaterales de las crisis de dos grandes estados, primero Ahhiyawa y posteriormente Hatti. Esta fase de inestabilidad se generalizó en el Mediterráneo Oriental a partir de la muerte de Ramses II ca. 1213 a.C. y Tudhaliya IV, ca. 1215/1209 a.C., en la cual las tensiones internas dentro de Hatti y Egipto, por los problemas sucesorios, tuvieron una import...

  7. A Digital Method for AC/AC Converter Controller by Natural-commutation%自然换流AC/AC变频控制器数字化实现方法

    Institute of Scientific and Technical Information of China (English)

    李光叶; 苏玉民; 文小青

    2011-01-01

    For the dead band in AC/AC converter controller,a design method of both software and hardware is presented. All the trigger pulses are created by DSP.The full digitalization of the system is completed.The self-commutation of the controller is achieved by intelligent utilization of two timers of DSP.The dead band of commutation is greatly reduced.The quality of output waveform is improved observably .The experimental result verify the outstanding effectiveness and precision of the controller.%针对AC/AC变频电路存在的换流死区问题,提出了一种AC/AC变频控制器软、硬件设计方法.该方法中6路触发脉冲均由DSP生成,完成对系统的全数字化控制.通过DSP中两个定时器的合理使用,实现了AC/AC变频器的自然换流,减小了换流死区对输出波形的影响.实验结果表明,所设计的AC/AC变频数字控制系统具有较高的控制精度和较好的控制效果.

  8. Power transmission over long three core submarine AC cables

    Energy Technology Data Exchange (ETDEWEB)

    Rudolfsen, Frode [NTNU, Trondheim (Norway); Balog, Georg E.; Evenset, Gunnar [Nexans Norway AS (Norway)

    2002-07-01

    There is an increasing ecological consciousness in power generation and one of the renewable resources that will be exploited in the near future is wind power. However, there are several undesirable facets to the onshore use of windmills so the large deployment of future windmills will be offshore, from 20 to 120 km off land. The electrical energy produced must be conveyed to land through submarine cables. There are two main modes of transport of bulk electrical energy, high voltage AC and DC transmission. There are a number of criteria used when a transmission system is designed, electrical, environmental and so on, but the cost of the transmission system is usually the deciding factor. The HVDC transmission is made possible by the use of Voltage Source Converter technology. Although this technology can start up with no rotating load and requires smaller footprint for the converter than previous technologies, the areas required are still very large and costly by offshore standards. Also the losses in the converters are relatively high, 4-6 %. It is well known that the HVAC transmission length is limited. The reason for this is the charging current that depends on type of insulation material and increases with the cable length and voltage. In recent years AC submarine cable systems are developed up to 170 kV with XLPE insulation. The development for higher voltages is commencing. There are a number of reasons that makes the increased transmission length with AC possible. The XLPE insulation has lower charging current than earlier used insulation materials, because of it's lower dielectric constant. The development of active, continuously variable compensators, Static VAR Compensators, may be used to achieve the lowest losses and charging currents under all operating conditions. The SVC allows also to take advantage of the reactive loads generated offshore and to reduce the offshore compensation requirements. Using three core submarine HVAC cables combined with

  9. Alzheimer's Project

    Medline Plus

    Full Text Available ... state Home > News & Events > Upcoming Events > HBO Alzheimer’s Project In the News Walk to End Alzheimer's Upcoming ... Disease Awareness Month World Alzheimer's Month HBO Alzheimer’s Project MAKE A DONATION Your gift will help us ...

  10. The DART-Europe project: towards developing a European theses portal

    OpenAIRE

    Ayris, P.; Pressler, C.; Moyle, M; McLean, A

    2005-01-01

    This paper will report on the new European theses project DART-Europe. The purpose of this project is to align institutional and national e-theses developments across Europe with the wider open archives movement by the construction of a European portal for research theses, thus enabling a global view of European institutional research assets. This project is driven through an innovative partnership between an information provider and an international body of university libraries and open ac...

  11. Six switches solution for single-phase AC/DC/AC converter with capability of second-order power mitigation in DC-link capacitor

    DEFF Research Database (Denmark)

    Liu, Xiong; Wang, Peng; Loh, Poh Chiang;

    2011-01-01

    This paper proposes an approach for DC-link second-order harmonic power cancellation in single-phase AC/DC/AC converter with reduced number of switches. The proposed six-switch converter has two bridges with three switches in each of them, where the middle switch in each bridge is shared by the AC....../DC rectifier and DC/AC inverter. A small size DC-link capacitor can be achieved through coordination control of rectifier and inverter to cancel the second-order oscillation power. Maximum available phase difference between rectifier’s and inverter’s modulation references is investigated to be dependent...... on their modulation indices of the six-switch converter, and high modulation indices are proved to be feasible for second-order power cancellation in the DC-link based on the phase difference analysis. Both reduced switch numbers and DC electrolytic capacitor size can be achieved using the proposed converter...

  12. Numerical and theoretical evaluations of AC losses for single and infinite numbers of superconductor strips with direct and alternating transport currents in external AC magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Kajikawa, K., E-mail: kajikawa@sc.kyushu-u.ac.j [Research Institute of Superconductor Science and Systems, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395 (Japan); Funaki, K. [Research Institute of Superconductor Science and Systems, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395 (Japan); Shikimachi, K.; Hirano, N.; Nagaya, S. [Chubu Electric Power Co., Inc., 20-1 Kitasekiyama, Ohdaka-cho, Midori-ku, Nagoya 459-8522 (Japan)

    2010-11-01

    AC losses in a superconductor strip are numerically evaluated by means of a finite element method formulated with a current vector potential. The expressions of AC losses in an infinite slab that corresponds to a simple model of infinitely stacked strips are also derived theoretically. It is assumed that the voltage-current characteristics of the superconductors are represented by Bean's critical state model. The typical operation pattern of a Superconducting Magnetic Energy Storage (SMES) coil with direct and alternating transport currents in an external AC magnetic field is taken into account as the electromagnetic environment for both the single strip and the infinite slab. By using the obtained results of AC losses, the influences of the transport currents on the total losses are discussed quantitatively.

  13. Numerical and theoretical evaluations of AC losses for single and infinite numbers of superconductor strips with direct and alternating transport currents in external AC magnetic field

    Science.gov (United States)

    Kajikawa, K.; Funaki, K.; Shikimachi, K.; Hirano, N.; Nagaya, S.

    2010-11-01

    AC losses in a superconductor strip are numerically evaluated by means of a finite element method formulated with a current vector potential. The expressions of AC losses in an infinite slab that corresponds to a simple model of infinitely stacked strips are also derived theoretically. It is assumed that the voltage-current characteristics of the superconductors are represented by Bean’s critical state model. The typical operation pattern of a Superconducting Magnetic Energy Storage (SMES) coil with direct and alternating transport currents in an external AC magnetic field is taken into account as the electromagnetic environment for both the single strip and the infinite slab. By using the obtained results of AC losses, the influences of the transport currents on the total losses are discussed quantitatively.

  14. Cluster emission in the radioactive decay of 223Ac

    CERN Document Server

    Steyn, G F; Faccio, D; Bonetti, R; Tretyakova, S P; Shishkin, S V; Ogloblin, A A; Pik-Pichak, G A; Vermeulen, C; van der Meulen, N P; van der Walt, T N; McGee, D

    2010-01-01

    The branching ratio of 223Ac decay by spontaneous 14C emission was measured and a search for 15N clusters was performed. After exposure of a hemispherical array of solid-state nuclear track detectors, 347 14C events were identified and no 15N events. B(14C) = λ(14C)/λ(α) = (3.2 ± 1.0) x 10-11 is consistent with a favoured ground state to ground state transition. As no nitrogen tracks were found, only an upper limit could be inferred for 15N emission, B(15N) = λ(15N)/λ(α) ≤ 2.2 x 10-13 (confidence limit 90%), consistent with an unfavoured transition. Intense 227Pa sources were produced for this study, using the reaction 232Th(p,6n)227Pa. This offered an opportunity to compare the measured source strength with predictions based on published excitation function data.

  15. Modeling of an AC Power System for High Power Spacecraft

    Science.gov (United States)

    Stankovic, A. V.; Birchenough, A. G.; Kenny, B.; Kimnach, G.

    2004-02-01

    This paper presents an analysis and simulation of an AC power system for a high power spacecraft that primarily supplies rectified loads. Two different configurations consisting of a three-phase PM synchronous generator and an associated power electronics converter are compared and analyzed. The first configuration consists of a three-phase PM synchronous generator and a three-phase diode bridge supplying a DC load. The second configuration consists of a three-phase PM synchronous generator and a three-phase PWM rectifier supplying the DC load. The modeling equations for both systems are derived. The comparisons between the two different configurations are summarized in a table in terms of efficiency, harmonic content and DC voltage ripple. The simulation results obtained by using SIMULINK are presented.

  16. Modelado acústico de silenciadores con material absorbente

    OpenAIRE

    TORRES PICAZO, MARÍA ISABEL

    2008-01-01

    Esta Tesis se centra en el desarrollo e implementación de métodos para el diseño y modelado acústico de silenciadores de motores de combustión interna, a través de herramientas basadas en soluciones analíticas y numéricas de la ecuación de ondas. La necesidad de técnicas de diseño que proporcionen rápida y eficazmente resultados precisos incluso a altas frecuencias ha aumentando con el tiempo, debido a que el ruido de los vehículos se ha convertido en una fuente importante de contaminación am...

  17. Resistojet control and power for high frequency ac buses

    Science.gov (United States)

    Gruber, Robert P.

    1987-01-01

    Resistojets are operational on many geosynchronous communication satellites which all use dc power buses. Multipropellant resistojets were selected for the Initial Operating Capability (IOC) Space Station which will supply 208 V, 20 kHz power. This paper discusses resistojet heater temperature controllers and passive power regulation methods for ac power systems. A simple passive power regulation method suitable for use with regulated sinusoidal or square wave power was designed and tested using the Space Station multipropellant resistojet. The breadboard delivered 20 kHz power to the resistojet heater. Cold start surge current limiting, a power efficiency of 95 percent, and power regulation of better than 2 percent were demonstrated with a two component, 500 W breadboard power controller having a mass of 0.6 kg.

  18. The AC magnetic susceptibility of high temperature superconductors

    CERN Document Server

    Salim, M

    2001-01-01

    This research concerns the development of AC magnetic susceptometers and use of susceptometers in analysing high temperature superconductors. Two of the designs were a differential magnetic susceptometer (DMS) and a double coil screening susceptometer (DCSS) whose descriptions are given in detail including coil design, field measurements, susceptometer operation, experimental instrumentation, phase adjustment, susceptometer calibration and sensitivity for each design. Theoretical details are given regarding each design in order to calculate the complex external and internal susceptibility. Investigation concerning the demagnetisation factor of different geometries, and the significant features and limitation for each design are also provided. The susceptometers were applied to a wide range of YBCO samples, which includes bulk samples with different geometry (i.e. Slabs, disk, powder and thick film) and thin films with different oxygen contents. Several silver sheathed Bi-2223 tapes were also involved. This al...

  19. Dc and ac Josephson effects in a granular material

    International Nuclear Information System (INIS)

    This paper reports on three-dimensional systems of point contacts that were prepared by pressing together Niobium grains of about 100 μm diameter inside a sapphire cylinder. Current-voltage characteristics were studied in dependence of temperature and, in addition, of the power of incident microwaves (X-bank). The results are similar to those established for a single weak link junction. Only for small currents the sample showed different behavior. The inverse a.c. Josephson effect was observed. The measured d.c. voltage shows and alternating temperature dependence which might be expected following the calculations of J.J. Chang for a weak link of small capacity and small resistance

  20. Experimental investigation of a.c. losses in cabled superconductors

    International Nuclear Information System (INIS)

    A.c. losses in multifilamentary composite superconducting strands and cables have been measured in adiabatic conditions for transverse field sweep rates up to 50 T s-1. Measurements were performed on NbTi and Nb3Sn conductors of several configurations and surface preparations: single strands, soldered strands and cables of varying degrees of compaction composed of bare strands, with CuNi barriers and strands with chrome plating. The experimental data agree well with existing loss models. The data suggests that the total cable loss grows as approx.= 1/(void)3 below void fractions of 40%. This observed cable loss dependence on void fraction does not agree well with a previously proposed model. (author)

  1. Measurement of AC losses in different former materials

    DEFF Research Database (Denmark)

    Olsen, Søren Krüger; Træholt, Chresten; Kühle, Anders Van Der Aa;

    1998-01-01

    candidates separately; for example copper tubes, stainless steel braid, copper braid, corrugated stainless steel tubes, etc. The measured data are compared with the predictions of a theoretical model. Our results show that in most cases, the losses induced by eddy currents in the former are negligible......A high temperature superconducting cable may be based on a centrally located cylindrical support, a so-called former. If electrically conductive, the former can contribute to the AC losses through eddy current losses caused by unbalanced axial and tangential magnetic fields. With these measurements...... we aim at investigating the eddy current losses of commonly used former materials. A one layer cable conductor was wound on a glass fibre reinforced polymer (GRFP) former. By inserting a variety of materials into this, it was possible to measure the eddy current losses of each of the former...

  2. A new LTPS TFT AC pixel circuit for an AMOLED

    International Nuclear Information System (INIS)

    This work presents a new voltage programmed pixel circuit for an active-matrix organic light-emitting diode (AMOLED) display. The proposed pixel circuit consists of six low temperature polycrystalline silicon thin-film transistors (LTPS TFTs), one storage capacitor, and one OLED, and is verified by simulation work using HSPICE software. Besides effectively compensating for the threshold voltage variation of the driving TFT and OLED, the proposed pixel circuit offers an AC driving mode for the OLED, which can suppress the degradation of the OLED. Moreover, a high contrast ratio can be achieved by the proposed pixel circuit since the OLED does not emit any light except for the emission period. (semiconductor integrated circuits)

  3. A new LTPS TFT AC pixel circuit for an AMOLED

    Institute of Scientific and Technical Information of China (English)

    Zhang Yongwen; Chen Wenbin

    2013-01-01

    This work presents a new voltage programmed pixel circuit for an active-matrix organic light-emitting diode (AMOLED) display.The proposed pixel circuit consists of six low temperature polycrystalline silicon thin-film transistors (LTPS TFTs),one storage capacitor,and one OLED,and is verified by simulation work using HSPICE software.Besides effectively compensating for the threshold voltage variation of the driving TFT and OLED,the proposed pixel circuit offers an AC driving mode for the OLED,which can suppress the degradation of the OLED.Moreover,a high contrast ratio can be achieved by the proposed pixel circuit since the OLED does not emit any light except for the emission period.

  4. ACS/SBC Internal Lamp P-flat Monitoring

    Science.gov (United States)

    Avila, Roberto J.; Chiaberge, Marco; Bohlin, Ralph

    2016-06-01

    We report on a Cycle 23 calibration program to monitor the status of the SBC P-flat. We find random pixel to pixel changes to be small, with only ˜2% of pixels having changed by more than 3σ. There are coherent changes that we measure to be above the poisson errors, in some regions as high as 4% peak to peak. We therefore recommend that the ACS team obtain new observations in order to create a new P-flat. We also measured the degradation of the deuterium lamp used to create internal flats. The brightness of the lamp is currently ˜65% of its initial level, the degradation being dependent on lifetime usage.

  5. Multi-wavelength observations of a rich galaxy cluster at z ~ 1: the HST/ACS colour-magnitude diagram

    CERN Document Server

    Santos, Joana S; Gobat, Raphael; Lidman, Chris; Dawson, Kyle; Perlmutter, Saul; Boehringer, Hans; Balestra, Italo; Mullis, Chris R; Fassbender, Rene; Kohnert, Jan; Lamer, Georg; Rettura, Alessandro; Rite, Charles; Schwope, Axel

    2009-01-01

    XMMU J1229+0151 is a rich galaxy cluster with redshift z=0.975, that was serendipitously detected in X-rays within the scope of the XMM-Newton Distant Cluster Project. HST/ACS observations in the i775 and z850 passbands, as well as VLT/FORS2 spectroscopy were further obtained, in addition to follow-up Near-Infrared (NIR) imaging in J- and Ks-bands with NTT/SOFI. We investigate the photometric, structural and spectral properties of the early-type galaxies in the high-redshift cluster XMMU J1229+0151. Source detection and aperture photometry are performed in the optical and NIR imaging. Galaxy morphology is inspected visually and by means of Sersic profile fitting to the 21 spectroscopically confirmed cluster members in the ACS field of view. The i775-z850 colour-magnitude relation (CMR) is derived with a method based on galaxy magnitudes obtained by fitting the surface brightness of the galaxies with Sersic models. The i775-z850 CMR of the spectroscopic members shows a very tight red-sequence with a zero point...

  6. The Sloan Lens ACS Survey. VII. Elliptical Galaxy Scaling Laws from Direct Observational Mass Measurements

    CERN Document Server

    Bolton, Adam S; Koopmans, Leon V E; Gavazzi, Raphael; Moustakas, Leonidas A; Burles, Scott; Schlegel, David J; Wayth, Randall

    2008-01-01

    We use a sample of 53 massive early-type strong gravitational lens galaxies with well-measured redshifts (ranging from z=0.06 to 0.36) and stellar velocity dispersions (between 175 and 400 km/s) from the Sloan Lens ACS (SLACS) Survey to derive numerous empirical scaling relations. The ratio between central stellar velocity dispersion and isothermal lens-model velocity dispersion is nearly unity within errors. The SLACS lenses define a fundamental plane (FP) that is consistent with the FP of the general population of early-type galaxies. We measure the relationship between strong-lensing mass M_lens within one-half effective radius (R_e/2) and the dimensional mass variable M_dim = G^-1 sigma_e2^2 R_e/2 to be log_10 [M_lens/10^11 M_Sun] = (1.03 +/- 0.04) log_10 [M_dim/10^11 M_Sun] + (0.54 +/- 0.02) (where sigma_e2 is the projected stellar velocity dispersion within R_e/2). The near-unity slope indicates that the mass-dynamical structure of massive elliptical galaxies is independent of mass, and that the "tilt" ...

  7. Seventy Three SGCC Standards on 1000 kV UHV AC Transmission Technology

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Name of Project:73 Standards including Q/GDW 319-2009 1000kV AC Transmission System Overvoltage and Insulation Coordination Guidelines Main Participant Units:State Grid Corporation of China,China Electric Power Research Institute,State Grid Electric Power Research Institute,China Power Engineering Consulting Group Corporation,Communication and Construction Branch of State Grid Corporation,Grid Operation Branch of State Grid Corporation Main Contributors:Liu Zhenya,Shu Yinbiao,Zheng Baosen,Sun Xin,Chen Weijiang,Yu Yongqing,Wang Jianping,Sun Zhusen,Liang Xuming,Guo Jianbo Award Grade:First PrizeBackground Ultra-High Voltage (UHV) transmission is featured by long distance,large capacity,low line loss,and land conservation.Compared with 500 kV EHV transmission system,UHV transmission power can be 4-5 times for the same transmission distance,UHV transmission distance and corridor capacity can be 3 times,but loss of transmission lines can be only one third for the same transmission power.At the end of 2004,State Grid Corporation of China (SGCC) made a proposal to develop the UHV technology and build a strong power grid.

  8. AC loss calculation of central solenoid model coil

    International Nuclear Information System (INIS)

    The AC loss of Central Solenoid Model Coil of ITER is calculated in order to be able to determine the allowable excitation current shape in time with respect to the available cooling capacity at liquid helium temperature. In Part A the theory is summarized essential to present calculation. This covers a semianalytical integral formulation to calculate the magnetic field distribution in the cross-section of a coil and also 2D and 3D differential formulations for eddy current calculation of jackets and structural steel components, respectively. In Part B the conditions and results of calculation are described in detail. Losses are calculated separately in different components. Also the different types of losses are separated, and only one of the followings is considered in the same time; eddy current loss, ferromagnetic hysteresis loss, superconducting hysteresis loss, coupling loss. The followings are concluded. The coupling loss was found to be the largest 83% of the total AC loss supposing 50 msec characteristic time constant. Also significant amount of heat is generated in structural steels, cooling is required for stainless steel structural components. The loss of joints is not large, however concentrated, therefore joints should receive attention. Specially Lap-type joints are critical components. The eddy current and coupling power losses can be significantly decreased by increasing the ramp-up time since they are proportional to the square of flux change rate, while superconducting and ferromagnetic hysteresis power losses decrease linearly with decreasing flux change rate. Joule losses are produced in joints even after the energizing process of the magnet, when it is driven by a constant excitation current. This propose us to keep the time of full power operation short. (J.P.N.)

  9. Freedom Project

    Directory of Open Access Journals (Sweden)

    Alejandra Suarez

    2014-02-01

    Full Text Available Freedom Project trains prisoners in nonviolent communication and meditation. Two complementary studies of its effects are reported in this article. The first study is correlational; we found decreased recidivism rates among prisoners trained by Freedom Project compared with recidivism rates in Washington state. The second study compared trained prisoners with a matched-pair control group and found improvement in self-reported anger, self-compassion, and certain forms of mindfulness among the trained group. Ratings of role-plays simulating difficult interactions show increased social skills among the group trained by Freedom Project than in the matched controls.

  10. TIARA project

    Science.gov (United States)

    Malecki, P.

    2013-10-01

    The aim of the Test Infrastructure and Accelerator Research Area - the TIARA project[1] is to consolidate and support the European R&D program in the field of physics and techniques of particle accelerators. This project, partially funded by the European Commission, groups 11 participants from 8 European countries, including Poland. Its present, threeyear (2011-2013) preparatory phase (PP) is shortly described in this paper. The project is divided into 9 work packages (WP). We will concentrate on four of them dedicated to governance, R&D infrastructures, joint R&D programming, and education and training, in which Polish participants are actively involved.

  11. Performance Analysis of Phase Controlled Unidirectional and Bidirectional AC Voltage Controllers

    Directory of Open Access Journals (Sweden)

    Abdul Sattar Larik

    2011-01-01

    Full Text Available AC voltage controllers are used to vary the output ac voltage from a fixed ac input source. They are also commonly called ac voltage regulators or ac choppers. The output voltage is either controlled by PAC (Phase Angle Control method or on-off control method. Due to various advantages of ac voltage controllers, such as high efficiency, simplicity, low cost and ability to control large amount of power they efficiently control the speed of ac motors, light dimming and industrial heating, etc. These converters are variable structure systems and generate harmonics during the operation which will affect the power quality when connected to system network. During the last couple of years, a number of new semiconductor devices and various power electronic converters has been introduced. Accordingly the subject of harmonics and its problems are of great concern to power industry and customers. In this research work, initially the simulation models of single phase unidirectional and bidirectional ac voltage controllers were developed by using MATLAB software. The harmonics of these models are investigated by simulation. In the end, the harmonics were also analyzed experimentally. The simulated as well as experimental results are presented.

  12. Single phase AC-DC power factor corrected converter with high frequency isolation using buck converter

    Directory of Open Access Journals (Sweden)

    R. Ramesh,

    2014-03-01

    Full Text Available Single phase ac-dc converters having high frequency isolation are implemented in buck, boost, buck-boost configuration with improving the power quality in terms of reducing the harmonics of input current. The paperpropose the circuit configuration, control mechanism, and simulation result for the single phase ac-dc converter.

  13. Review and Comparison of Step-Up Transformerless Topologies for Photovoltaic AC-Module Application

    DEFF Research Database (Denmark)

    Meneses, David; García, Óscar; A. Cobos, José;

    2013-01-01

    This paper presents a comprehensive review of step-up single-phase non-isolated inverters suitable for ac-module applications. In order to compare the most feasible solutions of the reviewed topologies, a benchmark is set. This benchmark is based on a typical ac-module application considering...

  14. Risk prediction of ventricular arrhythmias and myocardial function in Lamin A/C mutation positive subjects

    DEFF Research Database (Denmark)

    Hasselberg, Nina E; Edvardsen, Thor; Petri, Helle;

    2014-01-01

    Mutations in the Lamin A/C gene may cause atrioventricular block, supraventricular arrhythmias, ventricular arrhythmias (VA), and dilated cardiomyopathy. We aimed to explore the predictors and the mechanisms of VA in Lamin A/C mutation-positive subjects.METHODS AND RESULTS: We included 41 Lamin A...

  15. An NPV and AC Analysis of a Stochastic Inventory System with Joint Manufacturing and Remanufacturing

    NARCIS (Netherlands)

    E.A. van der Laan (Erwin)

    2000-01-01

    textabstractWhile the net present value (NPV) approach is widely accepted as the right framework for studying production and inventory control systems, average cost (AC) models are more widely used. For the well known EOQ model it can be veri_ed that (under certain conditions) the AC approach gives

  16. Measuring ac-loss in high temperature superconducting cable-conductors using four probe methods

    DEFF Research Database (Denmark)

    Kühle (fratrådt), Anders Van Der Aa; Træholt, Chresten; Olsen, Søren Krüger;

    1999-01-01

    Measuring the ac-loss of superconducting cable conductors have many aspects in common with measuring the ac-loss of single superconducting tapes. In a cable conductor all tapes are connected to each other and to the test circuit through normal metal joints in each end. This makes such measurement...

  17. Analysis of AC loss in superconducting power devices calculated from short sample data

    NARCIS (Netherlands)

    Rabbers, J.J.; Haken, ten B.; Kate, ten H.H.J.

    2003-01-01

    A method to calculate the AC loss of superconducting power devices from the measured AC loss of a short sample is developed. In coils and cables the magnetic field varies spatially. The position dependent field vector is calculated assuming a homogeneous current distribution. From this field profile

  18. Improved Tribological Performance of Amorphous Carbon (a-C Coating by ZrO2 Nanoparticles

    Directory of Open Access Journals (Sweden)

    Jinzhu Tang

    2016-09-01

    Full Text Available Nanomaterials, such as Graphene, h-BN nanoparticles and MoS2 nanotubes, have shown their ability in improving the tribological performance of amorphous carbon (a-C coatings. In the current study, the effectiveness of ZrO2 nanoparticles (ZrO2-NPs in lubricating the self-mated nonhydrogenated a-C contacts was investigated in boundary lubrication regime. The results showed that 13% less friction and 50% less wear compared to the base oil were achieved by employing ZrO2-NPs in the base oil in self-mated a-C contacts. Via analyzing the ZrO2-NPs and the worn a-C surface after tests, it was found that the improved lubrication by ZrO2-NPs was based on “polishing effects”, which is a new phenomenon observed between a-C and nanoparticles. Under the “polishing effect”, micro-plateaus with extremely smooth surface and uniform height were produced on the analyzed a-C surface. The resulting topography of the a-C coating is suitable for ZrO2-NPs to act as nano-bearings between rubbing surfaces. Especially, the ZrO2-NPs exhibited excellent mechanical and chemical stability, even under the severe service condition, suggesting that the combination of nonhydrogenated a-C coating with ZrO2-NPs is an effective, long lasting and environment-friendly lubrication solution.

  19. Nuclear Structure Effects in the Exotic Decay of $^{225}$Ac via $^{14}$C Emission

    CERN Multimedia

    2002-01-01

    % IS323 \\\\ \\\\ We propose to build at Isolde a high intensity $^{225}$Ac source by $\\beta$-decay of $^{225}$(Ra+Fr) beam, to be used at the superconducting spectrometer SOLENO of IPN-Orsay in order to study a possible fine structure in the spectrum of $^{14}$C ions spontaneously emitted by $^{225}$Ac.

  20. A Computer Model for Teaching the Dynamic Behavior of AC Contactors

    Science.gov (United States)

    Ruiz, J.-R. R.; Espinosa, A. G.; Romeral, L.

    2010-01-01

    Ac-powered contactors are extensively used in industry in applications such as automatic electrical devices, motor starters, and heaters. In this work, a practical session that allows students to model and simulate the dynamic behavior of ac-powered electromechanical contactors is presented. Simulation is carried out using a rigorous parametric…