WorldWideScience

Sample records for acoustical steam silencers

  1. Software for the design of acoustical steam silencers of the reaction-absorption type; Software para el diseno de silenciadores acusticos de vapor del tipo reaccion-absorcion

    Energy Technology Data Exchange (ETDEWEB)

    Buendia Dominguez, Eduardo H.; Alvarez Chavez, Jose M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    This paper describes the computer program named SILRA, that determines the outline dimensions of an acoustic steam silencer of the reaction-absorption type. These silencers are employed in the geothermoelectric power plants to lower the high levels of pressure and sound caused by the steam discharge to the surrounding atmosphere. The program has the capacity of predicting the noise level generated by the discharge without silencer depending on the emitting source. On SIRLA was successfully coupled the theory described in specialized literature with optimization techniques and experiences acquired in former designs. SIRLA is a powerful tool that allows the designer to optimize the equipment as well as the design time. [Espanol] En este trabajo se describe el programa de computo SILRA, que determina las dimensiones generales de un silenciador acustico de vapor tipo reaccion-absorcion, estos silenciadores se emplean en las centrales geotermoelectricas para abatir los altos niveles de presion de sonido provocados por la descarga del vapor a la atmosfera. El programa tiene la capacidad de predecir el nivel de ruido que genera la descarga sin silenciador, dependiendo de la fuente emisora. En SILRA se acoplaron con exito la teoria descrita en la literatura especializada con tecnicas de optimacion y experiencias adquiridas en disenos anteriores. SILRA es una poderosa herramienta que permite al disenador optimar tanto el equipo como el tiempo de diseno.

  2. Optimisation of acoustic silencer for the screw compressor system

    NARCIS (Netherlands)

    Swamy, M.; Lier, L.J. van; Smeulers, J.P.M.

    2014-01-01

    In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large variation in operating conditions, especially the variation of the molecular weight of the gas. There was need to optimize the silencer. This paper describes the acoustic modelling tools to opti

  3. Active acoustic leak detection for LMFBR steam generators. Pt. 6. Applicability to practical steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Kazuo; Kumagai, Hiromichi; Kinoshita, Izumi [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.

    1998-03-01

    It is necessary to develop a reliable water leak detection system for steam generators of liquid metal reactors in order to prevent the expansion of damage and to maintain the structural integrity of the steam generators. The concept of the active acoustic method is to detect the change of the ultrasonic field due to the hydrogen gas bubbles generated by a sodium-water reaction. This method has the potential for improved detection performance compared with conventional passive methods, from the viewpoint of sensitivity, response time and tolerance against the background noise. A feasibility study of the active acoustic leak detection system is being carried out. This report predicts the performance of the active acoustic method in the practical steam generators from the results of the large scale in-water experiments. The results shows that the active acoustic system can detect a 10 g/s leak within a few seconds in large-scale steam generators. (author)

  4. Review of the development of safety and relief valve silencers for steam discharge

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, C.J.

    1988-01-01

    The progress made by the Central Electricity Generating Board (CEGB) in the development of silencers for the control of boiler safety valve and relief valve noise is reviewed. System noise sources and the formulation of environmental noise criteria are discussed; the silencer design philosophy adopted by the CEGB is described and the progressive improvements are charted to demonstrate the advances made over earlier practices. The results of this work are design concepts which provide silencers which are suitable for application to any of the CEGB's steam valve vent systems and are capable of meeting stringent neighbourhood noise criteria.

  5. Apparatus and method for acoustic monitoring of steam quality and flow

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, Dipen N.; Pantea, Cristian

    2016-09-13

    An apparatus and method for noninvasively monitoring steam quality and flow and in pipes or conduits bearing flowing steam, are described. By measuring the acoustic vibrations generated in steam-carrying conduits by the flowing steam either by direct contact with the pipe or remotely thereto, converting the measured acoustic vibrations into a frequency spectrum characteristic of the natural resonance vibrations of the pipe, and monitoring the amplitude and/or the frequency of one or more chosen resonance frequencies, changes in the steam quality in the pipe are determined. The steam flow rate and the steam quality are inversely related, and changes in the steam flow rate are calculated from changes in the steam quality once suitable calibration curves are obtained.

  6. Time-domain CFD computation and analysis of acoustic attenuation performance of water-filled silencers

    Institute of Scientific and Technical Information of China (English)

    刘晨; 季振林; 程垠钟; 刘胜兰

    2016-01-01

    The multi-dimensional time-domain computational fluid dynamics (CFD) approach is extended to calculate the acoustic attenuation performance of water-filled piping silencers. Transmission loss predictions from the time-domain CFD approach and the frequency-domain finite element method (FEM) agree well with each other for the dual expansion chamber silencer, straight-through and cross-flow perforated tube silencers without flow. Then, the time-domain CFD approach is used to investigate the effect of flow on the acoustic attenuation characteristics of perforated tube silencers. The numerical predictions demonstrate that the mean flow increases the transmission loss, especially at higher frequencies, and shifts the transmission loss curve to lower frequencies.

  7. Signal analysis of acoustic and flow-induced vibrations of BWR main steam line

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa-Paredes, G., E-mail: gepe@xanum.uam.mx [División de Ciencias Básicas e Ingeniería, Universidad Autónoma Metropolitana-Iztapalapa, México, D.F. 09340 (Mexico); Prieto-Guerrero, A. [División de Ciencias Básicas e Ingeniería, Universidad Autónoma Metropolitana-Iztapalapa, México, D.F. 09340 (Mexico); Núñez-Carrera, A. [Comisión Nacional de Seguridad Nuclear y Salvaguardias, Doctor Barragán 779, Col. Narvarte, México, D.F. 03020 (Mexico); Vázquez-Rodríguez, A. [División de Ciencias Básicas e Ingeniería, Universidad Autónoma Metropolitana-Iztapalapa, México, D.F. 09340 (Mexico); Centeno-Pérez, J. [Instituto Politécnico Nacional, Escuela Superior de Física y Matemáticas Unidad Profesional “Adolfo López Mateos”, Av. IPN, s/n, México, D.F. 07738 (Mexico); Espinosa-Martínez, E.-G. [Departamento de Sistemas Energéticos, Universidad Nacional Autónoma de México, México, D.F. 04510 (Mexico); and others

    2016-05-15

    Highlights: • Acoustic and flow-induced vibrations of BWR are analyzed. • BWR performance after extended power uprate is considered. • Effect of acoustic side branches (ASB) is analyzed. • The ASB represents a reduction in the acoustic loads to the steam dryer. • Methodology developed for simultaneous analyzing the signals in the MSL. - Abstract: The aim of this work is the signal analysis of acoustic waves due to phenomenon known as singing in Safety Relief Valves (SRV) of the main steam lines (MSL) in a typical BWR5. The acoustic resonance in SRV standpipes and fluctuating pressure is propagated from SRV to the dryer through the MSL. The signals are analyzed with a novel method based on the Multivariate Empirical Mode Decomposition (M-EMD). The M-EMD algorithm has the potential to find common oscillatory modes (IMF) within multivariate data. Based on this fact, we implement the M-EMD technique to find the oscillatory mode in BWR considering the measurements obtained collected by the strain gauges located around the MSL. These IMF, analyzed simultaneously in time, allow obtaining an estimation of the effects of the multiple-SRV in the MSL. Two scenarios are analyzed: the first is the signal obtained before the installation of the acoustic dampers (ASB), and the second, the signal obtained after installation. The results show the effectiveness of the ASB to damp the strong resonances when the steam flow increases, which represents an important reduction in the acoustic loads to the steam dryer.

  8. 3D Acoustic Modelling of Dissipative Silencers with Nonhomogeneous Properties and Mean Flow

    Directory of Open Access Journals (Sweden)

    E. M. Sánchez-Orgaz

    2014-07-01

    Full Text Available A finite element approach is proposed for the acoustic analysis of automotive silencers including a perforated duct with uniform axial mean flow and an outer chamber with heterogeneous absorbent material. This material can be characterized by means of its equivalent acoustic properties, considered coordinate-dependent via the introduction of a heterogeneous bulk density, and the corresponding material airflow resistivity variations. An approach has been implemented to solve the pressure wave equation for a nonmoving heterogeneous medium, associated with the problem of sound propagation in the outer chamber. On the other hand, the governing equation in the central duct has been solved in terms of the acoustic velocity potential considering the presence of a moving medium. The coupling between both regions and the corresponding acoustic fields has been carried out by means of a perforated duct and its acoustic impedance, adapted here to include absorbent material heterogeneities and mean flow effects simultaneously. It has been found that bulk density heterogeneities have a considerable influence on the silencer transmission loss.

  9. Application of dual reciprocity boundary element method to predict acoustic attenuation characteristics of marine engine exhaust silencers

    Institute of Scientific and Technical Information of China (English)

    JI Zhen-lin; WANG Xue-ren

    2008-01-01

    In marine engine exhaust silencing systems,the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers.In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers,a dual reciprocity boundary element method (DRBEM)was developed.The acoustic governing equation in three-dimensional potential flow was derived first,and then the DRBEM numerical procedure is given.Compared to the conventional boundary elementmethod (CBEM),the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation,so it is suitable for the cases with higher Mach number subsonic flow.For complex exhaust silencers,it is difficult to apply the single-domain boundary element method,so a substructure approach based on the dual reciprocity boundary element method is presented.The experiments for measuring transmission loss of silencers are conducted,and the experimental setup and measurements are explained.The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements.The good agreements between predictions and measurements are observed,which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.

  10. The Sound of Steam: Acoustics as the Integrator Between Arts and STEM

    Science.gov (United States)

    Goates, Caleb; Whiting, Jenny; Berardi, Mark; Gee, Kent L.; Neilsen, Tracianne B.

    2016-03-01

    This paper describes the development and presentation of a Science, Technology, Engineering, Arts, and Math (STEAM) workshop for elementary school teachers designed to provide ideas and tools for using acoustics in the classroom. The abundant hands-on activities and concepts in acoustics naturally link science and music in an intuitive way that can assist teachers moving forward on the STEAM initiative. Our workshop gave teachers an introduction to acoustics principles and demonstrations that can be used to tie STEAM techniques with Utah State Education Core standards. These hands-on demonstrations and real-world applications provide an avenue to engage students and support learning outcomes. Feedback indicated that the participants learned from and enjoyed the initial implementation of this workshop, though many elementary school teachers did not immediately see how they could integrate it into their curriculum. While additional efforts might be made to better focus the training workshop for the K-6 level, curriculum developers need to appreciate how acoustics could be used more broadly at the elementary school level if the emphasis changes from STEM to STEAM. ?

  11. Impact of flow induced vibration acoustic loads on the design of the Laguna Verde Unit 2 steam dryer

    Energy Technology Data Exchange (ETDEWEB)

    Forsyth, D. R.; Wellstein, L. F.; Theuret, R. C.; Han, Y.; Rajakumar, C. [Westinghouse Electric Company LLC, Cranberry Township, PA 16066 (United States); Amador C, C.; Sosa F, W., E-mail: forsytdr@westinghouse.com [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Km 42.5 Carretera Cardel-Nautla, 91680 Alto Lucero, Veracruz (Mexico)

    2015-09-15

    Industry experience with Boiling Water Reactors (BWRs) has shown that increasing the steam flow through the main steam lines (MSLs) to implement an extended power up rate (EPU) may lead to amplified acoustic loads on the steam dryer, which may negatively affect the structural integrity of the component. The source of these acoustic loads has been found to be acoustic resonance of the side branches on the MSLs, specifically, coupling of the vortex shedding frequency and natural acoustic frequency of safety relief valves (SRVs). The resonance that results from this coupling can contribute significant acoustic energy into the MSL system, which may propagate upstream into the reactor pressure vessel steam dome and drive structural vibration of steam dryer components. This can lead to high-cycle fatigue issues. Lock-in between the vortex shedding frequency and SRV natural frequency, as well as the ability for acoustic energy to propagate into the MSL system, are a function of many things, including the plant operating conditions, geometry of the MSL/SRV junction, and placement of SRVs with respect to each other on the MSLs. Comision Federal de Electricidad and Westinghouse designed, fabricated, and installed acoustic side branches (ASBs) on the MSLs which effectively act in the system as an energy absorber, where the acoustic standing wave generated in the side-branch is absorbed and dissipated inside the ASB. These ASBs have been very successful in reducing the amount of acoustic energy which propagates into the steam dome. In addition, modifications to the Laguna Verde Nuclear Power Plant Unit 2 steam dryer have been completed to reduce the stress levels in critical locations in the dryer. The objective of this paper is to describe the acoustic side branch concept and the design iterative processes that were undertaken at Laguna Verde Unit 2 to achieve a steam dryer design that meets the guidelines of the American Society of Mechanical Engineers, Boiler and Pressure

  12. Standard practice for acoustic emission examination of cast iron yankee and steam heated paper dryers

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This practice provides guidelines for carrying out acoustic emission (AE) examinations of Yankee and Steam Heated Paper Dryers (SHPD) of the type to make tissue, paper, and paperboard products. 1.2 This practice requires pressurization to levels used during normal operation. The pressurization medium may be high temperature steam, air, or gas. The dryer is also subjected to significant stresses during the heating up and cooling down periods of operation. Acoustic Emission data maybe collected during these time periods but this testing is beyond the scope of this document. 1.3 The AE measurements are used to detect, as well as, localize emission sources. Other methods of nondestructive testing (NDT) may be used to further evaluate the significance of acoustic emission sources. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine th...

  13. Active acoustic leak detection for LMFBR steam generator. Sound attenuation due to bubbles

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi; Sakuma, Toshio [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.

    1995-06-01

    In the steam generators (SG) of LMFBR, it is necessary to detect the leakage of water from tubes of heat exchangers as soon as it occurs. The active acoustic detection method has drawn general interest owing to its short response time and reduction of the influence of background noise. In this paper, the application of the active acoustic detection method for SG is proposed, and sound attenuation by bubbles is investigated experimentally. Furthermore, using the SG sector model, sound field characteristics and sound attenuation characteristics due to injection of bubbles are studied. It is clarified that the sound attenuation depends upon bubble size as well as void fraction, that the distance attenuation of sound in the SG model containing heat transfer tubes is 6dB for each two-fold increase of distance, and that emitted sound attenuates immediately upon injection of bubbles. (author).

  14. Active acoustic leak detection for LMFBR steam generators. Pt. 7. Potential for small leak detection

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi; Yoshida, Kazuo [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.

    1998-05-01

    In order to prevent the expansion of tube damage and to maintain structural integrity in the steam generators (SGs) of fast breeder reactors (FBR), it is necessary to detect precisely and immediately the leakage of water from heat transfer tubes. Therefore, an active acoustic method, which detects the sound attenuation due to bubbles generated in the sodium-water reactions, is being developed. Previous studies have revealed that the active acoustic method can detect bubbles of 10 l/s (equivalence water leak rate about 10 g/s) within 10 seconds in practical steam generators. In order to prevent the expansion of damage to neighboring tubes, however, it is necessary to detect smaller leakage of water from heat transfer tubes. In this study, in order to evaluate the detection sensitivity of the active method, the signal processing methods for emitter and receiver sound and the detection method for leakage within 1 g/s are investigated experimentally, using an SG full-sector model that simulates the actual SGs. A typical result shows that detection of 0.4 l/s air bubbles (equivalent water leak rate about 0.4 g/s) takes about 80 seconds, which is shorter than the propagation time of damage to neighboring tubes. (author)

  15. Laser cleaning of steam generator tubing based on acoustic emission technology

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Su-xia; Luo, Ji-jun; Shen, Tao; Li, Ru-song [Xi' an Hi-Tech Institute, Xi' an (China)

    2015-12-15

    As a physical method, laser cleaning technology in equipment maintenance will be a good prospect. The experimental apparatus for laser cleaning of heat tubes in the steam generator was designed according to the results of theoretical analysis. There are two conclusions; one is that laser cleaning technology is attached importance to traditional methods. Which has advantages in saving on much manpower and material resource and it is a good cleaning method for heat tubes. The other is that the acoustic emission signal includes lots of information on the laser cleaning process, which can be used as real-time monitoring in laser cleaning processes. When the laser acts for 350 s, 100 % contaminants of heat tubes is cleaned off, and the sensor only receives weak AE signal at that time.

  16. Applied acoustics concepts, absorbers, and silencers for acoustical comfort and noise control alternative solutions, innovative tools, practical examples

    CERN Document Server

    Fuchs, Helmut V

    2013-01-01

    The author gives a comprehensive overview of materials and components for noise control and acoustical comfort. Sound absorbers must meet acoustical and architectural requirements, which fibrous or porous material alone can meet. Basics and applications are demonstrated, with representative examples for spatial acoustics, free-field test facilities and canal linings. Acoustic engineers and construction professionals will find some new basic concepts and tools for developments in order to improve acoustical comfort. Interference absorbers, active resonators and micro-perforated absorbers of different materials and designs complete the list of applications.

  17. Development of active acoustic method for water leak detection of LMFBR steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi; Yoshida, Kazuo; Kinoshita, Izumi [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    2001-06-01

    In order to prevent the expansion of tube damage and to maintain structural integrity in the steam generators (SGs) of fast breeder reactors (FBRs), it is necessary to detect precisely and immediately the leakage of water from heat transfer tubes. Therefore, an active acoustic method, which detects the sound attenuation due to bubbles generated in the sodium-water reactions, is being developed. In this study, in order to evaluate the detection sensitivity of the active method, the signal processing methods for emitter and receiver and the detection method for leakage are investigated experimentally. In-water experiments performed by using an SG full-sector model that simulates the actual SGs. As an experimental result, the received sound attenuation for 10s was more than 10dB from air bubble injection when injected bubble of 10 l/s (equivalence water leak rate about 10 g/s.) The attenuation of sound are least affected by bubble injection position of heat transfer tubes bunch department. It is clarified that the background noise hardly influenced water leak detection performance as a result of having examined influence of background noise. (author)

  18. Determination of stresses caused by fluctuation of acoustic load in the steam dryers of a BWR; Determinacion de esfuerzos originados por fluctuacion de carga acustica en los secadores de vapor de un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Centeno P, J.; Quezada G, S.; Prieto G, A.; Vazquez R, A.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Nunez C, A., E-mail: javcuami26@hotmail.com [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

    2014-10-15

    The extended power up-rate (EPU) in a nuclear power plant cause various problems in BWR components also in the steam system. This due to increased steam flow generated in the reactor and is conveyed to the turbine by the four main steam lines (MSL). One of the most serious problems is the generation of acoustic pressure loads in the metal structure of the steam dryer which eventually leads to fatigue failure and even the appearance of cracks, and in turn it causes loose parts that are entrained by the steam and transported in the MSL. This problem is due to the fluctuation of load acoustics caused by the union of the safety or relief valves (SRV) with the MSL, spreading through these to reach the reactor pressure vessel (RPV) where the effect of resonance of the acoustic wave is amplified and impacts directly in the supporting structure of the steam dryer, skirt and the panels where the mixture liquid-steam is dried, by centrifugation effect and runoff of liquid water. Efforts in the steam dryer operating conditions of EPU for two cases will be analyzed in this work, the first is before the installation of Acoustic Side Branch (ASB), and in the second case we consider the installation of said ASB in the standpipes of SRV. The analysis was performed with numerical experiments on a platform for computational fluid dynamics with virtual geometries previously designed based on the actual components of the reactor and steam system. The model to study is delimited by the top of the RPV, the steam dryer and a section of each of the four MSL with ten standpipes of SRV. With the obtained data and considering the mechanical-structural properties of the steam dryer material, we can evaluate the mechanical resistance to impacts by acoustic pressure load and its possible deformation or cracking. (Author)

  19. Development of a water leak detection system for LMFBR steam generators. Pt. 2; General planning of sensor arrangement for active acoustic method

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Kazuo; Kumagai, Hiromichi (Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.)

    1994-04-01

    Development of a water leak detection system with short response time and high sensitivity for LMFBR steam generators is required to prevent failure propagation and to maintain structural integrity of steam generators. A new type of leak detection method, active acoustic method, which observes gas bubbles accompanying the leak using sonic waves is being developed. In this study, some series of experiments are carried out to investigate; (1) attenuation of sonic wave in a typical SG structure, (2) suitable method to attach waveguides to the SG shell, and (3) possibility of reflex method. Furthermore, a reference sensor arrangement for active acoustic method is selected based on the experimental results as the basis of future studies. (author).

  20. Acoustic attenuation performance of a drumlike silencer%鼓型消声器的声学性能计算与分析

    Institute of Scientific and Technical Information of China (English)

    赵晓臣; 柳贡民; 张文平

    2015-01-01

    鼓型消声器是由膨胀腔和张紧的轻膜片构成。理论和实验研究表明,在空气输运系统中使用鼓型消声器能够在低频区域内取得较佳的降噪效果。使用 Green 函数和 Kirchhoff-Helmholtz 积分来计算矩形管道中膜片的辐射声场,进一步计算得到膜片振动引起的、作用在膜片上的辐射声压和消声器的传递损失。对比验证表明,所提出的解析法的计算结果和有限元仿真结果吻合良好。计算结果表明:通过简单地调节膜片的固有频率不能达到拓宽双腔并联鼓型消声器消声频带的目的;增大膜片和管道的距离将降低鼓型消声器的传递损失;将单腔鼓型消声器分为两个串联腔室后,可以通过长短腔室传递损失曲线的互补实现宽频降噪效果,并且每个膜片所需的优化张紧力下降,但是腔室分离之后低频消声效果将降低。%A drumlike silencer consists of an expansion chamber covered by light membranes under high tension. Theoretical and experimental study showed that introducing a drumlike silencer into a typical air conveying system can achieve a satisfactory quieting effect in a low-frequency region.Here,Green’s function and Kirchhoff-Helmholtz integral were used to solve the sound radiation of a membrane in a rectangular duct.After the vibration velocity of the membrane was obtained,the pressure perturbation induced by the membrane oscillation and the transmission loss of the silencer were calculated.The transmission loss calculated with the analytical method agreed well with that of the finite element method simulation.The results showed that simply adjusting the natural frequencies of membranes can't broaden the acoustic attenuation bandwidth of the drumlike silencer with two parallel cavities;and the performance of the silencer may degrade when the distance between the membrane and the duct increases;when the single cavity of a drumlike silencer is divided into

  1. Silence multiple

    DEFF Research Database (Denmark)

    Søndergaard, Katia Dupret

    The article highlights the importance of silences in the processes of innovation in organizations, and the claim is that silence and the absence of talk distribute authority, responsibility and decisions. The act of silencing is conceptualised as a central “configurating actor”. Using an Actor-Network...... it an important analytical element in understanding organizing and organizations....

  2. Hydrodynamic and acoustic analysis in 3-D of a section of main steam line to EPU conditions; Analisis hidrodinamico y acustico en 3D de una seccion de linea de vapor principal a condiciones de EPU

    Energy Technology Data Exchange (ETDEWEB)

    Centeno P, J.; Castillo J, V.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Area de Ingenieria en Recursos Energeticos, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Nunez C, A.; Polo L, M. A., E-mail: baldepeor21@hotmail.com [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

    2013-10-15

    The objective of this word is to study the hydrodynamic and acoustic phenomenon in the main steam lines (MSLs). For this study was considered the specific case of a pipe section of the MSL, where is located the standpipe of the pressure and/or safety relief valve (SRV). In the SRV cavities originates a phenomenon known as whistling that generates a hydrodynamic disturbance of acoustic pressure waves with different tones depending of the reactor operation conditions. In the SRV cavities the propagation velocity of the wave can originate mechanical damage in the structure of the steam dryer and on free parts. The importance of studying this phenomenon resides in the safety of the integrity of the reactor pressure vessel. To dissipate the energy of the pressure wave, acoustic side branches (ASBs) are used on the standpipe of the SRVs. The ASBs are arrangements of compacted lattices similar to a porous medium, where the energy of the whistling phenomenon is dissipate and therefore the acoustic pressure load that impacts in particular to the steam dryers, and in general to the interns of the vessel, diminishes. For the analysis of the whistling phenomenon two three-dimensional (3-D) models were built, one hydrodynamic in stationary state and other acoustic for the harmonic times in transitory regimen, in which were applied techniques of Computational Fluid Dynamics. The study includes the reactor operation analysis under conditions of extended power up rate (EPU) with ASB and without ASB. The obtained results of the gauges simulated in the MSL without ASB and with ASB, show that tones with values of acoustic pressure are presented in frequency ranges between 160 and 200 Hz around 12 MPa and of 7 MPa, respectively. This attenuation of tones implies the decrease of the acoustic loads in the steam dryer and in the interns of the vessel that are designed to support pressures not more to 7.5 MPa approximately. With the above-mentioned is possible to protect the steam dryer

  3. 穿孔管消声器声学性能三维时域计算及分析%Three-dimensional Time-domain Computation and Analysis of Acoustic Attenuation Performance of Perforated Tube Silencers

    Institute of Scientific and Technical Information of China (English)

    刘晨; 季振林; 徐航手

    2012-01-01

    将三维时域计算流体动力学(Computational fluid dynamics,CFD)法应用于计算有流情况下穿孔管消声器的声学性能.在消声器进口处施加脉冲信号与不施加任何信号的两种情况下,通过非定常计算分别得到消声器上下游监视点的时域压力值.同一监视点两次计算结果之差就是脉冲信号及其反射信号.使用快速傅里叶变换将时域声压信号转换到频域,计算出消声器的传递损失.对于直通穿孔管消声器和横流穿孔管消声器,使用三维时域CFD法计算传递损失,并与试验测量结果和频域法计算结果进行比较,以验证三维时域CFD法预测穿孔管消声器声衰减性能的准确性.分析气流速度和温度对横流穿孔管消声器传递损失的影响.结果表明,随着气流速度的增加,传递损失曲线向低频方向移动,多数频率处的传递损失有所增加:随着介质温度的升高,传递损失曲线向高频方向移动.%The three-dimensional time-domain computational fluid dynamics(CFD) approach is employed to compute the acoustic attenuation performance of perforated tube silencers with flow. For both cases with and without impulse signal imposed at the inlet of silencer, the time histories of the pressures at the upstream and downstream monitors of the silencer can be obtained through the unsteady calculations. The differences between two computational results at the same monitor are the impulse signal and corresponding reflective signal. The acoustic pressures in time domain are then transformed to the frequency domain by using the Fast Fourier Transform, and the transmission loss of silencer may be determined. The transmission loss of the straight-through perforated tube silencers and cross-flow perforated tube silencer is calculated using this method. The numerical predictions are compared with the experimental measurements and the calculated results from the frequency domain approach, which show that the three

  4. Active acoustic leak detection for LMFBR steam generator. Pt. 5. Experiment for detection of bubbles using the SG full sector model

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.

    1997-05-01

    In order to prevent the expansion of tube damages and to maintain structural safety in steam generators (SG) of fast breeder reactors (FBR), it is necessary to detect precisely and immediately the leakage of water from tubes of heat exchangers. Therefore, an active acoustic method, which detects the sound attenuation due to bubbles generated in the sodium-water reactions, it being developed. In this paper, the attenuation characteristics of sound attenuated by bubbles and influence of background noise are investigated experimentally by using an SG full sector model (diameter ratio about 1/1, height ratio about 1/7) simulating the actual SG. As an experimental result, the received sound attenuation for ten seconds was more than 10 dB from air bubble injection when injected bubble of 10 l/s (equivalence water leak rate about 10 g/s). The attenuation of sound are least affected by bubble injection position of heat exchanger tube bunch department. And the time was about 25 seconds till the sound attenuation became 10 dB in case of quantity of air bubble 1 l/s (equivalent water leak rate about 1 g/s). It is clarified that the background noise hardly influenced water leak detection performance as a result of having examined influence of background noise. (author)

  5. Active acoustic leak detection for LMFBR steam generators. Pt. 4. Experimental results for detection of bubble using the SG full sector model

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab.

    1996-06-01

    In order to prevent the expansion of tube damages and to maintain structural safety in steam generators (SG) of fast breeder reactor (FBR), it is necessary to detect precisely and immediately the leakage of water from tubes of heat exchangers. The active acoustic method, which detects the sound attenuation due to bubbles generated at the sodium-water reactions, is being developed. In this paper, the attenuation characteristics of sound attenuated by bubbles are investigated experimentally by using the SG full sector model simulating the actual SG. An emitter and a receiver sensor are attached to the SG shell, and the attenuation of sounds due to passing of bubbles through the sound field is detected and measured. As a experimental result, it is clarified that the received sound attenuates immediately upon injection of bubbles, and the attenuation of sound are 2-5 dB at after 10 seconds from bubble injection of 10 l/s. The attenuation of sound are least affected by bubble injection location. (author)

  6. 双级膨胀腔消声器声学与阻力特性的CFD仿真分析%Simulative Analysis of Acoustic Attenuation and Flow Resistance Characteristics of a Double Expansion Chamber Silencer Using CFD Approach

    Institute of Scientific and Technical Information of China (English)

    苏胜利; 汪利; 卢兆刚; 鲁民月

    2014-01-01

    使用二维轴对称时域CFD法计算双级膨胀腔消声器在无流和有流条件下的声衰减性能,并与实测结果进行比较。由于时域方法在计算中可以考虑复杂气流流动和介质粘性的影响,因而可以比较准确地预测双级膨胀腔消声器的传递损失。基于定常流动模型,使用Fluent软件预测双级膨胀腔消声器的压力损失,CFD计算结果与实验测量结果吻合良好。%The axisymmetric time-domain CFD method is employed to calculate the acoustic attenuation performance of a double expansion chamber silencer without and with air flow. The prediction results are compared with the experimental measurement data. Since the influences of complex gas flow and viscosity on the sound propagation and attenuation inside the silencer are included in the time-domain CFD simulation, the time-domain CFD method can accurately predict the transmission loss of the double expansion chamber silencer. Finally, the pressure drops of the double expansion chamber silencer are calculated by means of Fluent code based on the steady flow model. The CFD predictions are found to agree well with the experimental results.

  7. Prediction and evaluation of acoustic performance of silencer for turbocharger outlet%涡轮增压器出口消声器的性能预测和评估

    Institute of Scientific and Technical Information of China (English)

    刘联鋆; 郝志勇; 钱欣怡; 胡先锋

    2013-01-01

    In order to predict and evaluate the noise attenuation performance of a silencer connecting with the turbocharger compressor outlet, a research study was conducted. Firstly, a Three Dimensional (3-D) Computational Fluid Dynamic ( CFD) approach was adopted to calculate the noise reduction of the silencer under the condition of without flow. The reliability of CFD model was validated by the measured result. Further, transmission loss of the silencer, in the study of mean flow, was calculated by the CFD approach, so to analyze its acoustic performance in a straightforward manner. It was discovered that high value zone of transmission loss shifted to higher frequencies following the increase of the Mach numbers and temperature of the mean flow. The insertion loss of the silencer was also measured on an engine test rig under the behavior of low rotation speed of the turbocharger. In comparison with the transfer loss calculated by CFD method , the noise attenuation performance of the silencer was evaluated under these operating conditions. At last, the CFD approach was used to predict the noise attenuation performance of the silencer under real conditions of engine.%为了更加有效地预测和评估某涡轮增压器出口消声器的消声性能,首先采用三维CFD法计算该消声器在无流条件下的消声量,用实验测量结果验证CFD模型的可靠性.进一步用CFD法计算了消声器有平均流时的传递损失,以便直观地分析消声器的声学性能,发现随着平均流马赫数和温度的提高,传递损失高值区间向高频区域移动.在发动机台架上测量了增压器低转速工况下消声器的插入损失,对比CFD方法计算的传递损失,评估了消声器在此工况下的消声特性.最后用CFD方法预估了消声器在发动机实际工况下的消声性能.

  8. Transversal modes and acoustic attenuation performance of a perforated tube dissipative silencer%穿孔管阻性消声器横向模态和声学特性计算与分析

    Institute of Scientific and Technical Information of China (English)

    方智; 季振林

    2014-01-01

    The two-dimensional finite element method was used to calculate the transversal modes of a perforated tube dissipative silencer,and the numerical mode matching method was developed to predict its acoustic attenuation performance .The corresponding formulation was derived and the computational code was written.For a circular concentric configuration,the transmission losses achieved using the numerical mode matching method,the three-dimensional finite element method and tests agreed well.This fact demonstrated the correctness of the 2-D finite element method to calculate the transversal modes and that of the numerical mode matching method to predict the transmission loss of a perforated tube dissipative silencer,respectively.The numerical mode matching method was then used to investigate the effects of hole diameter,porosity,density of sound-absorbing material and offset of a perforated tube on the transversal modes and acoustic attenuation characteristics of the circular straight-through perforated tube dissipative silencer.The results showed that smaller hole diameter or higher porosity or bigger offset of perforated tube may lead to wider effective frequency range of plane wave domination,better acoustic attenuation performance in a high-frequency range,and worse acoustic attenuation performance in a middle-frequency range;increasing the filling density of sound-absorbing material may improve the acoustic attenuation of the silencer in a mid to high frequency range.%应用二维有限元法计算穿孔管阻性消声器的横向模态,利用数值模态匹配法计算其传递损失,推导了相应的公式并编写了计算程序。对于圆形同轴穿孔管阻性消声器的传递损失,数值模态匹配法计算结果与三维有限元法计算结果以及实验值吻合良好,表明了二维有限元法计算穿孔管阻性消声器横向模态和数值模态匹配法预测消声性能的准确性。进而分析孔径、穿孔率、吸声材料的

  9. Agglomeration removal of fine particles at super-saturation steam by using acoustic wave%燃煤细颗粒在过饱和氛围下声波团聚脱除的实验研究

    Institute of Scientific and Technical Information of China (English)

    颜金培; 陈立奇; 杨林军

    2014-01-01

    An experimental installation was set up for investigating experimentally agglomeration removal of dust particles under various steam super-saturation degrees by using acoustic wave. The results show that the acoustic wave entrainment coefficient for these fine particles goes up with increase of the super-saturation degree, leading to improvement of the removal efficiencies. When the super-saturation degree is below 1.0,the total removal efficiency of dust particles has almost no increase with it, and is quite low, about 10%. However, when the super-saturation degree is bigger than 1.0, the total efficiency can be promoted and goes up rapidly with the increase of super-saturation degree. For example, when the super-saturation degree increases from 1.0 to 1.5, the removal efficiency rises about 50%. The removal efficiency of dust particles increases also with rising sound pressure level. Even if at high sound pressure steam condensational growth can not occur yet at 0.3 of low steam super-saturation degree, hence, only low removal efficiency, less than 20%, is observed. But at 1.2 of high steam super-saturation degree, the removal efficiency can be significantly improved, for example at 130dB of lower sound pressure level, about 70% high efficiency can be obtained. These facts indicate that removal of dust particles can be effectively improved if acoustic wave is used, i.e. their agglomeration with steam can be enlarged.%在不同过饱和氛围下,建立了燃煤细颗粒在声波场中团聚长大脱除的实验装置,对细颗粒物在声波场和不同过饱和氛围下的团聚长大脱除特性进行了实验研究。结果表明:细颗粒在声波场中的夹带系数随过饱和度的增大而增加,相应的脱除效率也有所提高;在过饱和度低于1.0时,细颗粒的总脱除效率很低(约为10%),且几乎不随过饱和度的增大而增加,而当过饱和度大于1.0后,细颗粒的脱除效率随过饱和度的增大而

  10. Study on Numerical Prediction and Experimental Measurement of Acoustic Performance of Silencers in Medium Frequency Range%消声器中频声学性能数值预测与实验测量研究

    Institute of Scientific and Technical Information of China (English)

    李自强; 季振林; 张铁柱; 武耀

    2011-01-01

    The finite element method is used to calculate the internal sound field of a silencer, the mode waves are decomposed based on the acoustic mode theory, and then the transmission loss is determined.Based on the same theory, the transmission loss is measured through wave decomposition method with multi-sensors.It is found that results of the experimental measurement agree well with those of the numerical predictions.The effective frequency range for prediction and measurement of transmission loss are both extended beyond the cut-off frequency.%采用有限元法计算内部声场,根据管道声学模态理论分解出模态声波,进而计算出消声器的传递损失.采用相同的原理,通过多传声器声波分解法对简单膨胀腔消声器进行实验测量,实验测量结果与数值预测结果吻合较好,并将消声器传递损失的数值预测和实验测量的有效频率范围拓展到平面波截止频率以上.

  11. Steam Turbines

    Science.gov (United States)

    1981-01-01

    Turbonetics Energy, Inc.'s steam turbines are used as power generating systems in the oil and gas, chemical, pharmaceuticals, metals and mining, and pulp and paper industries. The Turbonetics line benefited from use of NASA research data on radial inflow steam turbines and from company contact with personnel of Lewis Research Center, also use of Lewis-developed computer programs to determine performance characteristics of turbines.

  12. Steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, G.; Gilli, P.V.; Fritz, K.; Lippitsch, J.

    1975-12-02

    A steam generator is disclosed which is particularly adapted to be used in nuclear power plants. A casing is provided with an inlet and outlet to receive and discharge a primary heating fluid from which heat is to be extracted. A pair of tube plates extend across the interior of the casing at the region of the inlet and outlet thereof, and a plurality of tubes extend along the interior of the casing and are connected in parallel between the tube plates with all of the tubes having open ends communicating with the inlet and outlet of the casing so that the primary heating fluid will flow through the interior of the tubes while a fluid in the casing at the exterior of the tubes will extract heat from the primary fluid. The casing has between the tubes at the region of the inlet a superheating chamber and at the region of the outlet a preheating chamber and between the latter chambers an evaporating chamber, the casing receiving water through an inlet at the preheating chamber and discharging superheated steam through an outlet at the superheating chamber. A separator communicates with the evaporating chamber to receive a mixture of steam and water therefrom for separating the steam from the water and for delivering the separated steam to the superheating chamber.

  13. Hitchcock's Melodramatic Silence.

    Science.gov (United States)

    Hemmeter, Thomas

    1996-01-01

    Argues that the filmwork of Alfred Hitchcock shows his manipulation of melodramatic silence in that his films demonstrate a link between silence and truth. Concludes that in the simultaneous longing for and denial of the power of film silence lies the modernist complexity of Hitchcock's films that suggests the uses of melodramatic language in a…

  14. A fast multipole boundary element method for acoustic performance prediction of dissipative silencers%阻性消声器声学性能预测的快速多极子边界元法

    Institute of Scientific and Technical Information of China (English)

    崔晓兵; 季振林

    2011-01-01

    To solve the large scale sound field problems with multi-domain and multi-absorbing materials, a substructure fast multipole boundary element approach was developed. In view of the fact that the arrangement order of an unknown column vector and the node number affected the speed of convergence, a principle was proposed to compose the whole matrix equation. Additionally, in light of the accuracy effect of multipole expansion computation caused by the complex acoustic parameters, some studies and corrections were conducted on the fast multipole boundary element method (FMBEM). As an example of application, the transmission loss of a dissipative expansion chamber silencer was calculated by using the substructure FMBEM and the conventional boundary element method (CBEM). The results indicate that the present approach and corrections are valid. Compared to the CBEM, the advantage of substructure FMBEM in computational efficiency was more obvious as the number of boundary nodes increased for a given frequency.%为解决大尺度声场中常见的多区域复合及多吸声材料复合问题,提出了一种子结构快速多极子边界元法.鉴于未知量列向量的构建次序及边界节点编号顺序对迭代收敛速度有重要影响,提出了整体矩阵方程的构建原则.此外,针对复数形式声参数对多极子展开式计算准确性的影响,对快速多极子边界元法进行了研究与修正.以膨胀腔阻性消声器为例,应用子结构快速多极子边界元法与传统边界元法计算其传递损失.结果表明,该方法与修正是有效的,而且在某给定频率下,随着边界未知节点数的增大,其相对于传统边界元法在计算效率方面的优势越来越明显.

  15. Steam Drum Design for Direct Steam Generation

    OpenAIRE

    Willwerth, Lisa; Müller, Svenja; Krüger, Joachim; Succo, Manuel; Feldhoff, Jan Fabian; Tiedemann, Jörg; Pandian, Juvaraj; Krüger, Dirk; Hennecke, Klaus

    2016-01-01

    For the direct steam generation in solar fields, the recirculation concept has been demonstrated in several installations. Water masses in the solar field vary during transient phases, such as passing clouds. The volume of the steam drum can serve as a buffer during such transients by taking in excess water and providing water storage. The saturated steam mass flow to the superheating section or the consumer can be maintained almost constant during short transients; therefore the steam drum p...

  16. Silence in Business Negotiation

    Institute of Scientific and Technical Information of China (English)

    杨娅琼; 杨敭

    2011-01-01

    @@ Ⅰ、Introduction Silence is the relative or total lack of audible sound.In our daily life, it is an indispensable part of communication, in reference to non verbal communication. When used in business negotiation, silence is the rhetorical practice of saying nothing when an opponent expects something to be said.Poorly executed, it can be very offensive, which would even bring a negotiation into a deadlock.However, well-timed silence can completely throw an opponent and give the negotiator the upper hand.

  17. Ombuds’ corner: Employee silence

    CERN Multimedia

    Vincent Vuillemin

    2013-01-01

    Although around a hundred cases a year are reported to the Ombuds, several issues may still not be disclosed due to employee silence*. The deliberate withholding of concerns, escalating misunderstandings or genuine conflicts can impede the global process of learning and development of a better respectful organizational workplace environment, and prevent the detection and correction of acts violating the CERN Code of Conduct.   For the employee him/herself, such silence can lead to feelings of anger, resentment, helplessness and humiliation. These feelings will inevitably contaminate personal and interpersonal relations, and poison creativity and effectiveness. Employee silence can be explained by many factors; sometimes it is connected to organizational forces. In their published paper*, authors Michael Knoll and Rolf van Dick found four forms of employee silence. People may stay silent if they feel that their opinion is neither welcomed nor valued by their management. They have gi...

  18. Steam Digest 2001

    Energy Technology Data Exchange (ETDEWEB)

    2002-01-01

    Steam Digest 2001 chronicles BestPractices Program's contributions to the industrial trade press for 2001, and presents articles that cover technical, financial and managerial aspects of steam optimization.

  19. Memories Persist in Silence

    Directory of Open Access Journals (Sweden)

    Sandra Patricia Arenas Grisales

    2012-08-01

    Full Text Available This article exposes the hypothesis that memory artifacts, created to commemorate the victims of armed conflict in Colombia, are an expression of the underground memories and a way of political action in the midst of war. We analyze three cases of creations of memory artifacts in Medellín, Colombia, as forms of suffering, perceiving and resisting the power of armed groups in Medellín. The silence, inherent in these objects, should not be treated as an absence of language, but as another form of expression of memory. Silence is a tactic used to overcome losses and reset everyday life in contexts of protracted violence.

  20. Steam Digest Volume IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-07-01

    This edition of the Steam Digest is a compendium of 2003 articles on the technical and financial benefits of steam efficiency, presented by the stakeholders of the U.S. Department of Energy's BestPractices Steam effort.

  1. The Gift of Silence

    Science.gov (United States)

    Haskins, Cathleen

    2011-01-01

    Slowing down, quieting the mind and body, and experiencing silence nourishes the spirit. Montessori educators are mandated to cultivate not just the intellect but the whole child. They recognize that nurturing the spirit of the child is part of what makes this form of education work so well. This article discusses the benefits of stillness and…

  2. Between Noise and Silence: Architecture since the 1970s

    Directory of Open Access Journals (Sweden)

    Alexandra Brown

    2012-12-01

    Full Text Available This essay considers noise in architectural discourse as it might lend form to issues hitherto tabled in rather different terms. We ask what noise offers this discussion or, perhaps better put, what seeing architectural debates in terms of distinctions between noise and silence, random and structured sound, silence as absence and pregnant void might add to disciplinary debates within architectural theory and criticism. By treating these acoustic values analogously rather than literally we wish to suggest that reading the late postmodern moment through this filter opens out new possibilities for a critical assessment of this period and its present-day legacies.

  3. Silence in Intercultural communication

    Institute of Scientific and Technical Information of China (English)

    Guo Jun

    2012-01-01

    In communication, most of people's attention focuses on verbal communication, nonverbal language as a means of exchange is often ignored. However, nonverbal language continues sending signals, and most of these signals are sent to conversational partners unconsciously. So correct understanding of these signals will help people improve effectiveness of communication. This article will focus on silence, a major part of nonverbal communication, exploring its communicative functions and cultural differences.

  4. The Silence of Michelangelo

    DEFF Research Database (Denmark)

    Foote, Jonathan

    2016-01-01

    In one of the many anecdotes about Michelangelo, the master neared completion of his colossal Moses, tapped him on the knee with his hammer and exclaimed,"Perché non parli?" As an act that liberates latent thoughts or material potentials, his cadenced hammer spoke through careful, repetitive, and...... and distractive, instead activate a contemplative place of silence. Perhaps more than merely a tool for removing stone, the hammer was an instrument for sonorous meditation with materials and thinking....

  5. Silence in the Communication or Communicating through Silence: Silence in Psychoanalysis

    Directory of Open Access Journals (Sweden)

    Rita Marta

    2014-10-01

    Full Text Available This paper is a reflection upon the meaning and importance of silence in the psychoanalytical relationship. Beginning with the silence in the “normal” relationship between people, we show how silence can be experienced as confortable or unconfortable, and how it can be used to achieve a bigger proximity or distance in the relationship with others. We show these same aspects in the psychoanalytical relationship, and the evolution of the regard towards silence along the development of psychoanalysis. We end, presenting the Nacht’s thinking about silence, who emphasizes its integrative and fundamental role in the psychoanalytical relationship. Thus, only through silence certain affects can be born, and silence allows the patient to internalize the analyst.

  6. An effective silencer design for artificially air conditioned environment.

    Science.gov (United States)

    Fujiwara, Kyoji; Pang, Li Feng

    2004-11-01

    An effective silencer for an air conditioning duct is studied. A duct with an acoustically soft boundary is employed as an effective silencer. On the acoustically soft boundary the sound pressure is zero and it is impossible to realize such boundary in the air-borne sound field, because of the non-existence of a much lighter medium than the air. In this study, the arrangement of one-quarter wave-length acoustic tubes is employed as a soft boundary. This acoustic tube has frequency dependence, but the sound pressure becomes nearly zero at the tube mouth around the odd resonance frequency. The relation between the noise reduction efficiency and this acoustically soft boundary is examined experimentally and more than 40 dB noise reduction is obtained in a one-half octave band around the first resonance frequency. It is also made clear that more than one wave length of soft boundary is required to get enough reduction compared with the reduction obtained in the case of quite a long soft boundary.

  7. An Isothermal Steam Expander for an Industrial Steam Supplying System

    OpenAIRE

    Chen-Kuang Lin; Guang-Jer Lai; Yoshiyuki Kobayashi; Masahiro Matsuo; Min-Chie Chiu

    2015-01-01

    Steam is an essential medium used in the industrial process. To ensure steam quality, small and middle scale boilers are often adopted. However, because a higher steam pressure (compared to the necessary steam pressure) is generated, the boiler’s steam pressure will be reduced via a pressure regulator before the steam is directed through the process. Unfortunately, pressure is somewhat wasted during the reducing process. Therefore, in order to promote energy efficiency, a pressure regulator i...

  8. A Research on the Design and Acoustic Numerical Simulation of Engine Induction Silencing Element%发动机进气消声元件设计与声学数值模拟的研究

    Institute of Scientific and Technical Information of China (English)

    陈达亮; 顾灿松; 王务林; 李洪亮

    2011-01-01

    提出了以声压级差值作为评价发动机进气系统消声性能的指标,并应选择入射声波声压级进行计算,同时施加伞吸声截面声阻抗,以反映进气系统真实的声学特性.考虑到开口端的影响,给出r谐振腔和1/4波长管共振频率理论计算的修正公式,使计算误差降至2%以内.最后对消声元件安装位置的选择进行了相关研究.%It is proposed that sound level difference is the appropriate indicator to evaluate the noise reduction performance of engine induction system, and the sound pressure level of incident sound wave should be selected in calculation with the acoustic impedance of full absorbent boundary condition applied for reflecting the real acoustic characteristics of induction system. Considering the effects of opening boundary, the corrected theoretical formulae of resonance frequency for both resonant cavity and quarter wave tube are given, reducing the calculation error down to within 2%. Finally, relevant study on the selection of the location of tuning device is also conducted.

  9. Safety Picks up "STEAM"

    Science.gov (United States)

    Roy, Ken

    2016-01-01

    This column shares safety information for the classroom. STEAM subjects--science, technology, engineering, art, and mathematics--are essential for fostering students' 21st-century skills. STEAM promotes critical-thinking skills, including analysis, assessment, categorization, classification, interpretation, justification, and prediction, and are…

  10. Antisense gene silencing

    DEFF Research Database (Denmark)

    Nielsen, Troels T; Nielsen, Jørgen E

    2013-01-01

    Since the first reports that double-stranded RNAs can efficiently silence gene expression in C. elegans, the technology of RNA interference (RNAi) has been intensively exploited as an experimental tool to study gene function. With the subsequent discovery that RNAi could also be applied...... to mammalian cells, the technology of RNAi expanded from being a valuable experimental tool to being an applicable method for gene-specific therapeutic regulation, and much effort has been put into further refinement of the technique. This review will focus on how RNAi has developed over the years and how...

  11. Epigenetic silencing in transgenic plants

    Directory of Open Access Journals (Sweden)

    Sarma eRajeev Kumar

    2015-09-01

    Full Text Available Epigenetic silencing is a natural phenomenon in which the expression of gene is regulated through modifications of DNA, RNA or histone proteins. It is a mechanism for defending host genomes against the effects of transposable element, viral infection and acts as a modulator of expression of duplicated gene family members and as a silencer of transgenes. A major breakthrough in understanding the mechanism of epigenetic silencing was discovery of silencing in transgenic tobacco plants due to interaction between two homologous promoters. The molecular mechanism of epigenetic mechanism is highly complicated and it is not completely understood yet. Two different molecular routes have been proposed for this, i.e. transcriptional gene silencing (TGS, which is associated with heavy methylation of promoter regions and blocks the transcription of transgene. The basic mechanism underlying post-transcriptional gene silencing (PTGS is degradation of the cytosolic mRNA of transgenes or endogenous genes. Undesired transgene silencing is of a major concern in transgenic technology used in crop improvement. A complete understanding of this phenomenon will be very useful for transgenic applications, where silencing of specific genes are required. The current status of epigenetic silencing in transgenic technology has been discussed and summarized in this mini-review.

  12. An Isothermal Steam Expander for an Industrial Steam Supplying System

    Directory of Open Access Journals (Sweden)

    Chen-Kuang Lin

    2015-01-01

    Full Text Available Steam is an essential medium used in the industrial process. To ensure steam quality, small and middle scale boilers are often adopted. However, because a higher steam pressure (compared to the necessary steam pressure is generated, the boiler’s steam pressure will be reduced via a pressure regulator before the steam is directed through the process. Unfortunately, pressure is somewhat wasted during the reducing process. Therefore, in order to promote energy efficiency, a pressure regulator is replaced by a steam expander. With this steam expander, the pressure will be transformed into mechanical energy and extracted during the expansion process. A new type of isothermal steam expander for an industrial steam supplying system will be presented in the paper. The isothermal steam expander will improve the energy efficiency of a traditional steam expander by replacing the isentropic process with an isothermal expansion process. With this, steam condensation will decrease, energy will increase, and steam quality will be improved. Moreover, the mathematical model of the isothermal steam expander will be established by using the Schmidt theory, the same principle used to analyze Stirling engines. Consequently, by verifying the correctness of the theoretical model for the isothermal steam expander using experimental data, a prototype of 100 c.c. isothermal steam expander is constructed.

  13. Acoustic Resonance Frequency Elimination Device for Safety Relief Valves

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.

    2014-07-01

    Industry experience has shown that Safety Relief Valves (SRVs) and Steam Dryers installed in Boiling Water Reactors (BWRs) experience vibration induced degradation and failures caused by acoustic resonance vibration of the main steam lines, resulting in decreased reliability and potential safety issues. The resonance is caused by vortex shedding from the standpipe inlet and acoustic standing waves in the standpipe, occurring when the two frequencies match. (Author)

  14. Bodies, Spaces, Voices, Silences

    Directory of Open Access Journals (Sweden)

    Donatella Mazzoleni

    2013-07-01

    Full Text Available A good architecture should not only allow functional, formal and technical quality for urban spaces, but also let the voice of the city be perceived, listened, enjoyed. Every city has got its specific sound identity, or “ISO” (R. O. Benenzon, made up of a complex texture of background noises and fluctuation of sound figures emerging and disappearing in a game of continuous fadings. For instance, the ISO of Naples is characterized by a spread need of hearing the sound return of one’s/others voices, by a hate of silence. Cities may fall ill: illness from noise, within super-crowded neighbourhoods, or illness from silence, in the forced isolation of peripheries. The proposal of an urban music therapy denotes an unpublished and innovative enlarged interdisciplinary research path, where architecture, music, medicine, psychology, communication science may converge, in order to work for rebalancing spaces and relation life of the urban collectivity, through the care of body and sound dimensions.

  15. Solar steam generation: Steam by thermal concentration

    Science.gov (United States)

    Shang, Wen; Deng, Tao

    2016-09-01

    The solar-driven generation of water steam at 100 °C under one sun normally requires the use of optical concentrators to provide the necessary energy flux. Now, thermal concentration is used to raise the vapour temperature to 100 °C without the need for costly optical concentrators.

  16. Steam generator tube failures

    Energy Technology Data Exchange (ETDEWEB)

    MacDonald, P.E.; Shah, V.N.; Ward, L.W.; Ellison, P.G.

    1996-04-01

    A review and summary of the available information on steam generator tubing failures and the impact of these failures on plant safety is presented. The following topics are covered: pressurized water reactor (PWR), Canadian deuterium uranium (CANDU) reactor, and Russian water moderated, water cooled energy reactor (VVER) steam generator degradation, PWR steam generator tube ruptures, the thermal-hydraulic response of a PWR plant with a faulted steam generator, the risk significance of steam generator tube rupture accidents, tubing inspection requirements and fitness-for-service criteria in various countries, and defect detection reliability and sizing accuracy. A significant number of steam generator tubes are defective and are removed from service or repaired each year. This wide spread damage has been caused by many diverse degradation mechanisms, some of which are difficult to detect and predict. In addition, spontaneous tube ruptures have occurred at the rate of about one every 2 years over the last 20 years, and incipient tube ruptures (tube failures usually identified with leak detection monitors just before rupture) have been occurring at the rate of about one per year. These ruptures have caused complex plant transients which have not always been easy for the reactor operators to control. Our analysis shows that if more than 15 tubes rupture during a main steam line break, the system response could lead to core melting. Although spontaneous and induced steam generator tube ruptures are small contributors to the total core damage frequency calculated in probabilistic risk assessments, they are risk significant because the radionuclides are likely to bypass the reactor containment building. The frequency of steam generator tube ruptures can be significantly reduced through appropriate and timely inspections and repairs or removal from service.

  17. The Identification of Nanoscale Structures According to a Parameters of Acoustic Structuroscopy Method

    Science.gov (United States)

    Ababkov, N. V.; Smirnov, A. N.; Bykova, N. V.

    2016-04-01

    The fracture surface of a destroyed steam turbine rotor is studied by acoustic structuroscopy method. The structural-phase state of the metal of the destroyed rotor of a steam turbine is studied using the methods of electron microscopy. It was established that in the areas of control, where the values of the acoustic characteristics have significant differences from the rest of the metal, detected nanocrystalline structure. The possibility of determining the structure of the nanoscale metal by acoustic structuroscopy is shown.

  18. Detection and location of leaks in district heating steam systems: Survey and review of current technology and practices

    Energy Technology Data Exchange (ETDEWEB)

    Kupperman, D.S.; Raptis, A.C.; Lanham, R.N.

    1992-03-01

    This report presents the results of a survey undertaken to identify and characterize current practices for detecting and locating leaks in district heating systems, particular steam systems. Currently used technology and practices are reviewed. In addition, the survey was used to gather information that may be important for the application of acoustic leak detection. A few examples of attempts to locate leaks in steam and hot water pipes by correlation of acoustic signals generated by the leaks are also discussed.

  19. Wireless Sensing, Monitoring and Optimization for Campus-Wide Steam Distribution

    Energy Technology Data Exchange (ETDEWEB)

    Olama, Mohammed M [ORNL; Allgood, Glenn O [ORNL; Kuruganti, Phani Teja [ORNL; Sukumar, Sreenivas R [ORNL; Woodworth, Ken [ORNL; Lake, Joe E [ORNL

    2011-11-01

    The US Congress has passed legislation dictating that all government agencies establish a plan and process for improving energy efficiencies at their sites. In response to this legislation, Oak Ridge National Laboratory (ORNL) has recently conducted a pilot study to explore the deployment of a wireless sensor system for a real-time measurement-based energy efficiency optimization. With particular focus on the 12-mile long steam distribution network in our campus, we propose an integrated system-level approach to optimize energy delivery within the steam distribution system. Our approach leverages an integrated wireless sensor and real-time monitoring capability. We make real time state assessment on the steam trap health and steam flow estimate of the distribution system by mounting acoustic sensors on the steam pipes/traps/valves and observing measurements of these sensors with state estimators for system health. Our assessments are based on a spectral-based energy signature scheme that interprets acoustic vibration sensor data to estimate steam flow rates and assess steam traps status. Experimental results show that the energy signature scheme has the potential to identify different steam trap states and it has sufficient sensitivity to estimate flow rate. Moreover, results indicate a nearly quadratic relationship over the test region between the overall energy signature factor and flow rate in the pipe. We are able to present the steam flow and steam trap status, sensor readings, and the assessed alerts as an interactive overlay within a web-based Google Earth geographic platform that enables decision makers to take remedial action. The goal is to achieve significant energy-saving in steam lines by monitoring and acting on leaking steam pipes/traps/valves. We believe our demonstration serves as an instantiation of a platform that extends implementation to include newer modalities to manage water flow, sewage and energy consumption.

  20. Le silence des agneaux

    Directory of Open Access Journals (Sweden)

    BERNARD ROY

    2012-01-01

    Full Text Available Ce texte est avant tout une réflexion sur la notion d'obéissance, initiée à partir de deux évènements impliquant étroitement des membres de la profession infirmière. L'auteur se réjouit de la prise de parole et de l'implication directe d'infirmières dans le contexte du printemps érable. Il estime que la posture de ces infirmières s'inscrit dans ce que l'éthicien Guy Durand, appelle une obéissance autonome qui peut, du coup, mener à la désobéissance civile, à l'objection de conscience. En prenant exemple sur le silence des infirmières dans le contexte de la fermeture de postes d'infirmières en Minganie, l'auteur estime que cette posture est marginale chez les infirmières qui, majoritairement, adoptent une position de soumission et d'obéissance hétéronome.

  1. RNA silencing movement in plants

    Institute of Scientific and Technical Information of China (English)

    Glykeria Mermigka; Frederic Verret; Kriton Kalantidis

    2016-01-01

    Multicellular organisms, like higher plants, need to coordinate their growth and development and to cope with environmental cues. To achieve this, various signal molecules are transported between neighboring cells and distant organs to control the fate of the recipient cells and organs. RNA silencing produces cell non-autonomous signal molecules that can move over short or long distances leading to the sequence specific silencing of a target gene in a well defined area of cells or throughout the entire plant, respectively. The nature of these signal molecules, the route of silencing spread, and the genes involved in their production, movement and reception are discussed in this review. Additionally, a short section on features of silencing spread in animal models is presented at the end of this review.

  2. Towards new understandings of silence

    OpenAIRE

    Cronin, James G. R.

    2009-01-01

    Eye & Mind research seminar, History of Art ‘Fruit of Silence’, a reflective case study by American writer and teacher Marilyn Nelson (2006), considers the role of silence/meditation, what she terms as ‘contemplative pedagogy’, as a learning tool in teaching a literature class to cadets being trained at West Point followed by cadet responses to silence during their military service in Iraq during the Second Gulf War (2003--). Through letters, two former West Point cadets, who subsequently ...

  3. Communication Acoustics

    DEFF Research Database (Denmark)

    Blauert, Jens

    Communication Acoustics deals with the fundamentals of those areas of acoustics which are related to modern communication technologies. Due to the advent of digital signal processing and recording in acoustics, these areas have enjoyed an enormous upswing during the last 4 decades. The book...... the book a source of valuable information for those who want to improve or refresh their knowledge in the field of communication acoustics - and to work their way deeper into it. Due to its interdisciplinary character Communication Acoustics is bound to attract readers from many different areas, such as......: acoustics, cognitive science, speech science, and communication technology....

  4. High performance steam development

    Energy Technology Data Exchange (ETDEWEB)

    Duffy, T.; Schneider, P. [Solar Turbines Inc., San Diego, CA (United States)

    1995-10-01

    Over 30 years ago U.S. industry introduced the world`s highest temperature (1200{degrees}F at 5000 psig) and most efficient power plant, the Eddystone coal-burning steam plant. The highest alloy material used in the plant was 316 stainless steel. Problems during the first few years of operation caused a reduction in operating temperature to 1100{degrees}F which has generally become the highest temperature used in plants around the world. Leadership in high temperature steam has moved to Japan and Europe over the last 30 years.

  5. STEAM GENERATOR GROUP PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Clark, R. A.; Lewis, M

    1985-09-01

    This report is a summary of progress in the Surry Steam Generator Group Project for 1984. Information is presented on the analysis of two baseline eddy current inspections of the generator. Round robin series of tests using standard in-service inspection techniques are described along with some preliminary results. Observations are reported of degradation found on tubing specimens removed from the generator, and on support plates characterized in-situ. Residual stresses measured on a tubing specimen are reported. Two steam generator repair demonstrations are described; one for antivibration bar replacement, and one on tube repair methods. Chemical analyses are shown for sludge samples removed from above the tube sheet.

  6. Research of laser cleaning technology for steam generator tubing

    Science.gov (United States)

    Hou, Suixa; Luo, Jijun; Xu, Jun; Yuan, Bo

    2010-10-01

    Surface cleaning based on the laser-induced breakdown of gas and subsequent shock wave generation can remove small particles from solid surfaces. Accordingly, several studies in steam generator tubes of nuclear power plants were performed to expand the cleaning capability of the process. In this work, experimental apparatus of laser cleaning was designed in order to clean heat tubes in steam generator. The laser cleaning process is monitored by analyzing acoustic emission signal experimentally. Experiments demonstrate that laser cleaning can remove smaller particles from the surface of steam generator tubes better than other cleaning process. It has advantages in saving on much manpower and material resource, and it is a good cleaning method for heat tubes, which can be real-time monitoring in laser cleaning process of heat tubes by AE signal. As a green cleaning process, laser cleaning technology in equipment maintenance will be a good prospect.

  7. Acoustic telemetry

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — To determine movements of green turtles in the nearshore foraging areas, we deployed acoustic tags and determined their movements through active and passive acoustic...

  8. Transcriptional Silencing of Retroviral Vectors

    DEFF Research Database (Denmark)

    Lund, Anders Henrik; Duch, M.; Pedersen, F.S.

    1996-01-01

    . Extinction of long-term vector expression has been observed after implantation of transduced hematopoietic cells as well as fibroblasts, myoblasts and hepatocytes. Here we review the influence of vector structure, integration site and cell type on transcriptional silencing. While down-regulation of proviral...... transcription is known from a number of cellular and animal models, major insight has been gained from studies in the germ line and embryonal cells of the mouse. Key elements for the transfer and expression of retroviral vectors, such as the viral transcriptional enhancer and the binding site for the t......RNA primer for reverse transcription may have a major influence on transcriptional silencing. Alterations of these elements of the vector backbone as well as the use of internal promoter elements from housekeeping genes may contribute to reduce transcriptional silencing. The use of cell culture and animal...

  9. Silence in the creative process

    Directory of Open Access Journals (Sweden)

    Francesco Wilhelm

    2015-01-01

    Full Text Available A research about silence as the moment where creative thinking takes place, as an art object and as a way of interpreting artworks, is the main issue of the graduation thesis named Il silenzio nel processo creativo (2014. Here is proposed an offprint, which summarizes its fundamental steps.

  10. Wet steam wetness measurement in a 10 MW steam turbine

    OpenAIRE

    Kolovratník Michal; Bartoš Ondřej

    2014-01-01

    The aim of this paper is to introduce a new design of the extinction probes developed for wet steam wetness measurement in steam turbines. This new generation of small sized extinction probes was developed at CTU in Prague. A data processing technique is presented together with yielded examples of the wetness distribution along the last blade of a 10MW steam turbine. The experimental measurement was done in cooperation with Doosan Škoda Power s.r.o.

  11. Wet steam wetness measurement in a 10 MW steam turbine

    Directory of Open Access Journals (Sweden)

    Kolovratník Michal

    2014-03-01

    Full Text Available The aim of this paper is to introduce a new design of the extinction probes developed for wet steam wetness measurement in steam turbines. This new generation of small sized extinction probes was developed at CTU in Prague. A data processing technique is presented together with yielded examples of the wetness distribution along the last blade of a 10MW steam turbine. The experimental measurement was done in cooperation with Doosan Škoda Power s.r.o.

  12. Acoustical Imaging

    CERN Document Server

    Litniewski, Jerzy; Kujawska, Tamara; 31st International Symposium on Acoustical Imaging

    2012-01-01

    The International Symposium on Acoustical Imaging is a unique forum for advanced research, covering new technologies, developments, methods and theories in all areas of acoustics. This interdisciplinary Symposium has been taking place continuously since 1968. In the course of the years the proceedings volumes in the Acoustical Imaging Series have become a reference for cutting-edge research in the field. In 2011 the 31st International Symposium on Acoustical Imaging was held in Warsaw, Poland, April 10-13. Offering both a broad perspective on the state-of-the-art as well as  in-depth research contributions by the specialists in the field, this Volume 31 in the Series contains an excellent collection of papers in six major categories: Biological and Medical Imaging Physics and Mathematics of Acoustical Imaging Acoustic Microscopy Transducers and Arrays Nondestructive Evaluation and Industrial Applications Underwater Imaging

  13. Acoustic textiles

    CERN Document Server

    Nayak, Rajkishore

    2016-01-01

    This book highlights the manufacturing and applications of acoustic textiles in various industries. It also includes examples from different industries in which acoustic textiles can be used to absorb noise and help reduce the impact of noise at the workplace. Given the importance of noise reduction in the working environment in several industries, the book offers a valuable guide for companies, educators and researchers involved with acoustic materials.

  14. Acoustic biosensors

    OpenAIRE

    Fogel, Ronen; Limson, Janice; Seshia, Ashwin A.

    2016-01-01

    Resonant and acoustic wave devices have been researched for several decades for application in the gravimetric sensing of a variety of biological and chemical analytes. These devices operate by coupling the measurand (e.g. analyte adsorption) as a modulation in the physical properties of the acoustic wave (e.g. resonant frequency, acoustic velocity, dissipation) that can then be correlated with the amount of adsorbed analyte. These devices can also be miniaturized with advantages in terms of ...

  15. Wet steam treatment with oxygen

    Energy Technology Data Exchange (ETDEWEB)

    Ruehle, W.; Enkler, G. [EnBW Kraftwerke AG, Kernkraftwerk Philippsburg (Germany)

    1999-07-01

    After many years of excellent results using high all volatile treatment (HAVT) for operation of the secondary system of a PWR, flow assisted corrosion in the heating pipes of the intermediate steam reheaters has been experienced. Oxygen addition into the heating steam before the reheater is expected to improve the protective oxide layers formation. The reaction of oxygen with the alkalizing steam ingredients is described. (orig.)

  16. Process for purifying geothermal steam

    Science.gov (United States)

    Li, C.T.

    Steam containing hydrogen sulfide is purified and sulfur recovered by passing the steam through a reactor packed with activated carbon in the presence of a stoichiometric amount of oxygen which oxidizes the hydrogen sulfide to elemental sulfur which is adsorbed on the bed. The carbon can be recycled after the sulfur has been recovered by vacuum distillation, inert gas entrainment or solvent extraction. The process is suitable for the purification of steam from geothermal sources which may also contain other noncondensable gases.

  17. Regenerative superheated steam turbine cycles

    Science.gov (United States)

    Fuller, L. C.; Stovall, T. K.

    1980-01-01

    PRESTO computer program was developed to analyze performance of wide range of steam turbine cycles with special attention given to regenerative superheated steam turbine cycles. It can be used to model standard turbine cycles, including such features as process steam extraction, induction and feedwater heating by external sources, peaking, and high back pressure. Expansion line efficiencies, exhaust loss, leakages, mechanical losses, and generator losses are used to calculate cycle heat rate and generator output. Program provides power engineer with flexible aid for design and analysis of steam turbine systems.

  18. Drum silencer with shallow cavity filled with helium.

    Science.gov (United States)

    Choy, Y S; Huang, Lixi

    2003-09-01

    The motivation of this study is twofold: (a) to produce a flow-through silencer with zero pressure loss for pressure-critical applications, and (b) to tackle low frequency noise with limited sideway space using cavities filled with helium. The work represents a further development of our recently conceived device of a drum-like silencer with conventional air cavity [Huang, J. Acoust. Soc. Am. 112, 2014-2025 (2002); Choy and Huang, ibid. 112, 2026-2035 (2002)]. Theoretical predictions are validated by experimental data. The new silencer consists of two highly tensioned membranes lining part of a duct, and each membrane is backed by a cavity filled with helium. For a typical configuration of a duct with height h, membrane length L = 7h, cavity depth h = 0.2h, and tension T = 0.52rho0c0(2)h2, where rho0 and c0 are the ambient density and speed of sound in air, respectively, the transmission loss has a continuous stop band of TL > 6.35 dB for frequency 0.03c0/h to 0.064c0/h, which is much better than traditional duct lining. In addition to the mechanisms at work for drum silencers with air cavity, the low density of helium reduces the masslike reactance of the cavity on the second in vacuo mode of membrane vibration. The reduction greatly enhances the membrane response at this mode, which is found to be critical for achieving a broadband performance in the low-frequency regime.

  19. Steam refining as an alternative to steam explosion.

    Science.gov (United States)

    Schütt, Fokko; Westereng, Bjørge; Horn, Svein J; Puls, Jürgen; Saake, Bodo

    2012-05-01

    In steam pretreatment the defibration is usually achieved by an explosion at the end of the treatment, but can also be carried out in a subsequent refiner step. A steam explosion and a steam refining unit were compared by using the same raw material and pretreatment conditions, i.e. temperature and time. Smaller particle size was needed for the steam explosion unit to obtain homogenous slurries without considerable amounts of solid chips. A higher amount of volatiles could be condensed from the vapour phase after steam refining. The results from enzymatic hydrolysis showed no significant differences. It could be shown that, beside the chemical changes in the cell wall, the decrease of the particle size is the decisive factor to enhance the enzymatic accessibility while the explosion effect is not required.

  20. Structural and Phase State of Fractured Rotor of High-Pressure Steam Turbine

    Science.gov (United States)

    Smirnov, A. N.; Ababkov, N. V.; Kozlov, E. V.; Koneva, N. A.; Popova, N. A.

    2016-03-01

    The structural and phase state of the metal of a fractured rotor of a steam turbine is studied with the use of modern methods of physical research. The metal is shown to contain gradient structures. The cause of the failure of the rotor is established. The gradient structures are determined by the developed method of acoustic scanning.

  1. Radiation acoustics

    CERN Document Server

    Lyamshev, Leonid M

    2004-01-01

    Radiation acoustics is a developing field lying at the intersection of acoustics, high-energy physics, nuclear physics, and condensed matter physics. Radiation Acoustics is among the first books to address this promising field of study, and the first to collect all of the most significant results achieved since research in this area began in earnest in the 1970s.The book begins by reviewing the data on elementary particles, absorption of penetrating radiation in a substance, and the mechanisms of acoustic radiation excitation. The next seven chapters present a theoretical treatment of thermoradiation sound generation in condensed media under the action of modulated penetrating radiation and radiation pulses. The author explores particular features of the acoustic fields of moving thermoradiation sound sources, sound excitation by single high-energy particles, and the efficiency and optimal conditions of thermoradiation sound generation. Experimental results follow the theoretical discussions, and these clearl...

  2. A mode matching method for modeling dissipative silencers lined with poroelastic materials and containing mean flow.

    Science.gov (United States)

    Nennig, Benoit; Perrey-Debain, Emmanuel; Ben Tahar, Mabrouk

    2010-12-01

    A mode matching method for predicting the transmission loss of a cylindrical shaped dissipative silencer partially filled with a poroelastic foam is developed. The model takes into account the solid phase elasticity of the sound-absorbing material, the mounting conditions of the foam, and the presence of a uniform mean flow in the central airway. The novelty of the proposed approach lies in the fact that guided modes of the silencer have a composite nature containing both compressional and shear waves as opposed to classical mode matching methods in which only acoustic pressure waves are present. Results presented demonstrate good agreement with finite element calculations provided a sufficient number of modes are retained. In practice, it is found that the time for computing the transmission loss over a large frequency range takes a few minutes on a personal computer. This makes the present method a reliable tool for tackling dissipative silencers lined with poroelastic materials.

  3. Steam generator tube integrity program

    Energy Technology Data Exchange (ETDEWEB)

    Dierks, D.R.; Shack, W.J. [Argonne National Laboratory, IL (United States); Muscara, J.

    1996-03-01

    A new research program on steam generator tubing degradation is being sponsored by the U.S. Nuclear Regulatory Commission (NRC) at Argonne National Laboratory. This program is intended to support a performance-based steam generator tube integrity rule. Critical areas addressed by the program include evaluation of the processes used for the in-service inspection of steam generator tubes and recommendations for improving the reliability and accuracy of inspections; validation and improvement of correlations for evaluating integrity and leakage of degraded steam generator tubes, and validation and improvement of correlations and models for predicting degradation in steam generator tubes as aging occurs. The studies will focus on mill-annealed Alloy 600 tubing, however, tests will also be performed on replacement materials such as thermally-treated Alloy 600 or 690. An overview of the technical work planned for the program is given.

  4. Management of the Acoustic Characteristics of Jet Streams

    Directory of Open Access Journals (Sweden)

    Bulat Pavel Viktorovich

    2014-07-01

    Full Text Available The objects of research are devices, which generate and suppress the acoustic and wave pressure oscillations. Purpose of the study is the classification of oscillations generating devices, description of the physical principles of acoustic waves generation. The schemes of the most common sound generators-whistles are discussed. The gas-jet sound generators are described separately. It is shown that a simple cylindrical head at the supersonic nozzle can both enhance the acoustic emission and serve as an effective silencer. The comparison of acoustic emission of a supersonic jet and a jet, flowing into a cylindrical head is given. The results presented in the study can be recommended by the developers of whistles, sirens, other acoustic generators, installations for thermo-acoustic hardening metals, metallurgical blast devices.

  5. [E. M. Jellinek's silenced and silencing transgenerational story].

    Science.gov (United States)

    Kelemen, Gábor; Márk, Mónika

    2013-01-01

    Jellinek is a kind of archetypal character for future generations in the field of addiction studies. His implosion in the arena of alcoholism around the age of 50 was an unexpected challenge to medical science. We know very little about his own role models giving an intellectual and moral compass to his pragmatic creativity. More than 30 years has passed since Jellinek's death when an American sociologist Ron Roizen started unearthing his silent story. Roizen discerned that there are a lot of unsaid and muted issues in his personal Hungarian past. Our paper, based on the authors' research in Hungarian archives and other sources reveals that not just Jellinek's personal but his transgenerational narrative has been not-yet-said. This silenced and silencing history appears an unfinished business of acculturation of the family, which started prior to four generations. Authors have been concluding that the issue of religious conversion is a critical point in the process of acculturation. They examine the counter move of loyalty to family values and driving force of assimilation making their story unspeakable.

  6. Silence

    Science.gov (United States)

    Cogswell, J.

    2011-06-01

    On the occasion of the International Year of Astronomy, I was commissioned to create a mural for the University of Michigan Department of Astronomy, responding to an array of scientific images based on astronomical research, with special focus on the work of University of Michigan astronomers carried out within the building. My paper illustrates the development of this and several subsequent projects, explaining the implications for my artistic practice of entering into this conversation with astronomers and their work.

  7. Acoustical Imaging

    CERN Document Server

    Akiyama, Iwaki

    2009-01-01

    The 29th International Symposium on Acoustical Imaging was held in Shonan Village, Kanagawa, Japan, April 15-18, 2007. This interdisciplinary Symposium has been taking place every two years since 1968 and forms a unique forum for advanced research, covering new technologies, developments, methods and theories in all areas of acoustics. In the course of the years the volumes in the Acoustical Imaging Series have developed and become well-known and appreciated reference works. Offering both a broad perspective on the state-of-the-art in the field as well as an in-depth look at its leading edge research, this Volume 29 in the Series contains again an excellent collection of seventy papers presented in nine major categories: Strain Imaging Biological and Medical Applications Acoustic Microscopy Non-Destructive Evaluation and Industrial Applications Components and Systems Geophysics and Underwater Imaging Physics and Mathematics Medical Image Analysis FDTD method and Other Numerical Simulations Audience Researcher...

  8. Battlefield acoustics

    CERN Document Server

    Damarla, Thyagaraju

    2015-01-01

    This book presents all aspects of situational awareness in a battlefield using acoustic signals. It starts by presenting the science behind understanding and interpretation of sound signals. The book then goes on to provide various signal processing techniques used in acoustics to find the direction of sound source, localize gunfire, track vehicles, and detect people. The necessary mathematical background and various classification and fusion techniques are presented. The book contains majority of the things one would need to process acoustic signals for all aspects of situational awareness in one location. The book also presents array theory, which is pivotal in finding the direction of arrival of acoustic signals. In addition, the book presents techniques to fuse the information from multiple homogeneous/heterogeneous sensors for better detection. MATLAB code is provided for majority of the real application, which is a valuable resource in not only understanding the theory but readers, can also use the code...

  9. Acoustics Research

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fisheries acoustics data are collected from more than 200 sea-days each year aboard the FRV DELAWARE II and FRV ALBATROSS IV (decommissioned) and the FSV Henry B....

  10. Room Acoustics

    Science.gov (United States)

    Kuttruff, Heinrich; Mommertz, Eckard

    The traditional task of room acoustics is to create or formulate conditions which ensure the best possible propagation of sound in a room from a sound source to a listener. Thus, objects of room acoustics are in particular assembly halls of all kinds, such as auditoria and lecture halls, conference rooms, theaters, concert halls or churches. Already at this point, it has to be pointed out that these conditions essentially depend on the question if speech or music should be transmitted; in the first case, the criterion for transmission quality is good speech intelligibility, in the other case, however, the success of room-acoustical efforts depends on other factors that cannot be quantified that easily, not least it also depends on the hearing habits of the listeners. In any case, absolutely "good acoustics" of a room do not exist.

  11. A direct mixed-body boundary element method for packed silencers.

    Science.gov (United States)

    Wu, T W; Cheng, C Y R; Zhang, P

    2002-06-01

    Bulk-reacting sound absorbing materials are often used in packed silencers to reduce broadband noise. A bulk-reacting material is characterized by a complex mean density and a complex speed of sound. These two material properties can be measured by the two-cavity method or calculated by empirical formulas. Modeling the entire silencer domain with a bulk-reacting lining will involve two different acoustic media, air and the bulk-reacting material. Traditionally, the interior silencer domain is divided into different zones and a multi-domain boundary element method (BEM) may be applied to solve the problem. However, defining different zones and matching the elements along each interface is tedious, especially when the zones are intricately connected. In this paper, a direct mixed-body boundary element method is used to model a packed silencer without subdividing it into different zones. This is achieved by summing up all the integral equations in different zones and then adding the hypersingular integral equations at interfaces. Several test cases, including a packed expansion chamber with and without an absorbing center bullet, and a parallel baffle silencer, are studied. Numerical results for the prediction of transmission loss (TL) are compared to experimental data.

  12. Potential of Metal Fibre Felts as Passive Absorbers in Absorption Silencers

    Directory of Open Access Journals (Sweden)

    Björn Hinze

    2013-03-01

    Full Text Available The growing noise exposure of residents, due to a rising number of flights, causes significant impacts on physical health. Therefore it is necessary to reduce the noise emission of aircrafts. During take-off, the noise generated by the jet engines is dominating. One way to lower the noise emission of jet engines is to build an absorption silencer by using porous liners. Because of the high thermic and corrosive attacks as well as high fatigue loads, conventional absorbers cannot be used. A promising material is sintered metal fibre felts. This study investigates the suitability of metal fibre felts for the use as absorption material in silencers. The influences of pore morphology, absorption coefficient, determined with perpendicular sound incidence, as well as geometric parameters of the silencer to the damping are identified. To characterise the material, the parameters fibre diameter, porosity and thickness are determined using three-dimensional computer tomography images. The damping potential of absorption silencers is measured using an impedance tube, which was modified for transmission measurements. The essential parameter to describe the acoustic characteristics of porous materials is the flow resistivity. It depends on the size, shape and number of open pores in the material. Finally a connection between pore morphology, flow resistivity of the metal fibre felts and damping potential of the absorption silencer is given.

  13. "The Silence Itself Is Enough of a Statement": The Day of Silence and LGBTQ Awareness Raising

    Science.gov (United States)

    Woolley, Susan W.

    2012-01-01

    This ethnographic study of a high school gay-straight alliance club examines unintended consequences of silence during the Day of Silence, a day of action aimed at addressing anti-LGBTQ bias in schools. While this strategy calls for students to engage in intentional silences to raise awareness of anti-LGBTQ bias, it does not necessarily lead…

  14. General purpose steam table library :

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, John H.; Belcourt, Kenneth Noel; Nourgaliev, Robert

    2013-08-01

    Completion of the CASL L3 milestone THM.CFD.P7.04 provides a general purpose tabular interpolation library for material properties to support, in particular, standardized models for steam properties. The software consists of three parts, implementations of analytic steam models, a code to generate tables from those models, and an interpolation package to interface the tables to CFD codes such as Hydra-TH. Verification of the standard model is maintained through the entire train of routines. The performance of interpolation package exceeds that of freely available analytic implementation of the steam properties by over an order of magnitude.

  15. Advanced technologies on steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Sakata, Kaoru; Nakamura, Yuuki [Mitsubishi Heavy Industry Co., Takasago (Japan); Nakamori, Nobuo; Mizutani, Toshiyuki; Uwagawa, Seiichi; Saito, Itaru [Mitsubishi Heavy Industry Co., Kobe (Japan); Matsuoka, Tsuyoshi [Mitsubishi Heavy Industry Co., Yokohama (Japan)

    1997-12-31

    The thermal-hydraulic tests for a horizontal steam generator of a next-generation PWR (New PWR-21) were performed. The purpose of these tests is to understand the thermal-hydraulic behavior in the secondary side of horizontal steam generator during the plant normal operation. A test was carried out with cross section slice model simulated the straight tube region. In this paper, the results of the test is reported, and the effect of the horizontal steam generator internals on the thermalhydraulic behavior of the secondary side and the circulation characteristics of the secondary side are discussed. (orig.). 3 refs.

  16. STEAM DALAM PEMBUATAN PAKAN UNTUK KOMODITAS AKUAKULTUR

    OpenAIRE

    Sukarman Sukarman

    2010-01-01

    Kualitas fisik pakan (pelet) untuk hewan akuakultur sangat penting, karena akan dimasukkan ke dalam air dan diharapkan tidak banyak mencemari lingkungan. Salah satu faktor yang berpengaruh dalam menjaga kualitas fisik pakan adalah penambahan dan pengaturan steam pada saat proses pembuatan pelet. Steam adalah aliran gas yang dihasilkan oleh air pada saat mendidih. Steam dibagi menjadi 3 jenis yaitu steam basah, saturated steam, dan superheated steam. Steam yang digunakan dalam proses pembuatan...

  17. Improved design of intake silencers for compressors used in diesel engines%柴油机压气机进气消声器改进设计

    Institute of Scientific and Technical Information of China (English)

    温华兵; 桑晶晶; 刘红丹; 陆必旺

    2014-01-01

    To improve the acoustic attenuation performance of intake silencers for compressors used in diesel engines,an empirical formula on acoustic attenuation of intake silencers of radial flow type is derived. Through an acoustic attenuation performance experiment of silencers,it is concluded that the empirical formula with Zellen acoustic attenuation coefficient is more appropriate to the calculation of the acoustic attenuation of intake silencers of radial flow type. The influence of the sound absorption perform-ance of materials,the spans between sound absorption plates and the diameters of sound absorption plates on the acoustic attenuation performance is analyzed,and the improved design scheme is proposed. The acoustic attenuation performance of the improved silencer increases by 9. 6 dB.%为提高柴油机压气机进气消声器的消声性能,推导径流式进气消声器声衰减量的经验公式.通过消声器的消音性能实验,表明采用Zellen消声系数的经验公式更适合于径流式进气消声器的声衰减量计算.分析材料吸声性能、吸声片间距、吸声片直径参数对消音性能的影响,提出消声器改进设计方案.改进后的消声器消声性能提高了9.6 dB.

  18. Communication to Enhance Silence: The Trappist Experience

    Science.gov (United States)

    Jaksa, James A.; Stech, Ernest L.

    1978-01-01

    Investigates perceptions of the amount of interpersonal communication and attitudes towards communication frequency after the Trappist monk's rule of enforced silence and solitude was lifted in 1969. Concludes that increased interpersonal communication resulted in increased self-awareness and therefore more meaningful and effective silence. (MH)

  19. Silences Which Elicit Reversals in Business Meetings.

    Science.gov (United States)

    Wasson, Christina

    An ethnographic and linguistic study conducted at a high-technology corporation examined decision-making in managerial meetings, focusing on the effects of silences following a proposal on the maker of the proposal. An opinion is that such silences signify a negative evaluation of the proposal, inviting the proposal maker to alter his position.…

  20. Silence in Cross-cultural Communication

    Institute of Scientific and Technical Information of China (English)

    常利娜; 郭芳芳; 郝继亭; 顾庆媛; 孙胜强

    2008-01-01

    In academic field, silence is classified as part of the nonverbal communication. Edward T. Hall regarded silence as a key standard of dividing high-context cultures and low-context cultures (毕 46). In high-context cultures, information is provided through gestures, the use of space, and even silence. Little information is explicitly explained by words. Chinese, Japanese, Native American cultures are high-context ones. However, "in low-context cultures, the verbal message contains most of the information and very little is embedded in the context." (Samovar, A. Larry, Richard E. Porter and Lisa A. Stefani 79). How do people from different cultures respond to silence? How their values affect their attitudes? What causes silence?

  1. Acoustic biosensors

    Science.gov (United States)

    Fogel, Ronen; Seshia, Ashwin A.

    2016-01-01

    Resonant and acoustic wave devices have been researched for several decades for application in the gravimetric sensing of a variety of biological and chemical analytes. These devices operate by coupling the measurand (e.g. analyte adsorption) as a modulation in the physical properties of the acoustic wave (e.g. resonant frequency, acoustic velocity, dissipation) that can then be correlated with the amount of adsorbed analyte. These devices can also be miniaturized with advantages in terms of cost, size and scalability, as well as potential additional features including integration with microfluidics and electronics, scaled sensitivities associated with smaller dimensions and higher operational frequencies, the ability to multiplex detection across arrays of hundreds of devices embedded in a single chip, increased throughput and the ability to interrogate a wider range of modes including within the same device. Additionally, device fabrication is often compatible with semiconductor volume batch manufacturing techniques enabling cost scalability and a high degree of precision and reproducibility in the manufacturing process. Integration with microfluidics handling also enables suitable sample pre-processing/separation/purification/amplification steps that could improve selectivity and the overall signal-to-noise ratio. Three device types are reviewed here: (i) bulk acoustic wave sensors, (ii) surface acoustic wave sensors, and (iii) micro/nano-electromechanical system (MEMS/NEMS) sensors. PMID:27365040

  2. Steam reforming of ethanol

    DEFF Research Database (Denmark)

    Trane-Restrup, Rasmus; Dahl, Søren; Jensen, Anker Degn

    2013-01-01

    Steam reforming (SR) of oxygenated species like bio-oil or ethanol can be used to produce hydrogen or synthesis gas from renewable resources. However, deactivation due to carbon deposition is a major challenge for these processes. In this study, different strategies to minimize carbon deposition...... on Ni-based catalysts during SR of ethanol were investigated in a flow reactor. Four different supports for Ni were tested and Ce0.6Zr0.4O2 showed the highest activity, but also suffered from severe carbon deposition at 600 °C or below. Operation at 600 °C or above were needed for full conversion...... 400 ppm of the carbon in the feed at approx. 600 °C. The different promoters did not influence the product distribution to any significant extent. Selective poisoning with small amounts of K2SO4 on Ni–CeO2/MgAl2O4 at 600 °C decreased carbon deposition from 900 to 200 ppm of the carbon in the feed...

  3. Droplets Acoustics

    CERN Document Server

    Dahan, Raphael; Carmon, Tal

    2015-01-01

    Contrary to their capillary resonances (Rayleigh, 1879) and their optical resonances (Ashkin, 1977), droplets acoustical resonances were rarely considered. Here we experimentally excite, for the first time, the acoustical resonances of a droplet that relies on sound instead of capillary waves. Droplets vibrations at 37 MHz rates and 100 quality factor are optically excited and interrogated at an optical threshold of 68 microWatt. Our vibrations span a spectral band that is 1000 times higher when compared with drops previously-studied capillary vibration.

  4. Boundary layer control device for duct silencers

    Science.gov (United States)

    Schmitz, Fredric H. (Inventor); Soderman, Paul T. (Inventor)

    1993-01-01

    A boundary layer control device includes a porous cover plate, an acoustic absorber disposed under the porous cover plate, and a porous flow resistive membrane interposed between the porous cover plate and the acoustic absorber. The porous flow resistive membrane has a flow resistance low enough to permit sound to enter the acoustic absorber and high enough to damp unsteady flow oscillations.

  5. Public privacy: Reciprocity and Silence

    Directory of Open Access Journals (Sweden)

    Jenny Kennedy

    2014-10-01

    Full Text Available In his 1958 poem 'Dedication to my Wife' TS Eliot proclaims "these are private words addressed to you in public". Simultaneously written for his wife, Valerie Fletcher, and to the implied you of a discourse network, Eliot's poem helps to illustrate the narrative voices and silences that are constitutive of an intimate public sphere. This paper situates reciprocity as a condition of possibility for public privacy. It shows how reciprocity is enabled by systems of code operating through material and symbolic registers. Code promises to control communication, to produce neutral, systemic forms of meaning. Yet such automation is challenged by uneven and fragmented patterns of reciprocity. Moreover, examining the media of public privacy reveals historical trajectories important for understanding contemporary socio­technical platforms of reciprocity. To explore the implicit requirement of reciprocity in publicly private practices, three sites of communication are investigated framed by a media archaeology perspective: postal networks, the mail­art project PostSecret and the anonymous zine 'You'.

  6. Steam Digest 2001: Office of Industrial Technologies

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-01-01

    Steam Digest 2001 chronicles Best Practices Program's contributions to the industrial trade press for 2001, and presents articles that cover technical, financial and managerial aspects of steam optimization.

  7. Steam pretreatment for coal liquefaction

    Science.gov (United States)

    Ivanenko, Olga

    The objectives of this work are to test the application of steam pretreatment to direct coal liquefaction, to investigate the reaction of model compounds with water, and to explore the use of zeolites in these processes. Previous work demonstrated the effectiveness of steam pretreatment in a subsequent flash pyrolysis. Apparently, subcritical steam ruptures nearly all of the ether cross links, leaving a partially depolymerized structure. It was postulated that very rapid heating of the pretreated coal to liquefaction conditions would be required to preserve the effects of such treatment. Accordingly, a method was adopted in which coal slurry is injected into a hot autoclave containing solvent. Since oxygen is capable of destroying the pretreatment effect, precautions were taken for its rigorous exclusion. Tests were conducted with Illinois No. 6 coal steam treated at 340sp°C, 750 psia for 15 minutes. Both raw and pretreated samples were liquified in deoxygenated tetralin at high severity (400sp°C, 30 min.) and low severity (a: 350sp°C, 30 min., and b: 385sp°C, 15 min.) conditions under 1500 psia hydrogen. Substantial improvement in liquid product quality was obtained and the need for rapid heating and oxygen exclusion demonstrated. Under low severity conditions, the oil yield was more than doubled, going from 12.5 to 29 wt%. Also chemistry of the pretreatment process was studied using aromatic ethers as model compounds. alpha-Benzylnaphthyl ether (alpha-BNE), alpha-naphthylmethyl phenyl (alpha-NMPE), and 9-phenoxyphenanthrene were exposed to steam and inert gas at pretreatment conditions and in some cases to liquid water at 315sp°C. alpha-BNE and alpha-NMPE showed little difference in conversion in inert gas and in steam. Hence, these compounds are poor models for coal in steam pretreatment. Thermally stable 9-phenoxyphenanthrene, however, was completely converted in one hour by liquid water at 315sp°C. At pretreatment conditions mostly rearranged starting

  8. BWR Steam Dryer Alternating Stress Assessment Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Morante, R. J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Hambric, S. A. [Brookhaven National Lab. (BNL), Upton, NY (United States); Ziada, S. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-12-01

    This report presents an overview of Boiling Water Reactor (BWR) steam dryer design; the fatigue cracking failures that occurred at the Quad Cities (QC) plants and their root causes; a history of BWR Extended Power Uprates (EPUs) in the USA; and a discussion of steam dryer modifications/replacements, alternating stress mechanisms on steam dryers, and structural integrity evaluations (static and alternating stress).

  9. STEAM DALAM PEMBUATAN PAKAN UNTUK KOMODITAS AKUAKULTUR

    Directory of Open Access Journals (Sweden)

    Sukarman Sukarman

    2010-12-01

    Full Text Available Kualitas fisik pakan (pelet untuk hewan akuakultur sangat penting, karena akan dimasukkan ke dalam air dan diharapkan tidak banyak mencemari lingkungan. Salah satu faktor yang berpengaruh dalam menjaga kualitas fisik pakan adalah penambahan dan pengaturan steam pada saat proses pembuatan pelet. Steam adalah aliran gas yang dihasilkan oleh air pada saat mendidih. Steam dibagi menjadi 3 jenis yaitu steam basah, saturated steam, dan superheated steam. Steam yang digunakan dalam proses pembuatan pelet adalah saturated steam. Pengaruh penambahan steam pada kualitas pelet bisa mencapai 20%. Penambahan steam dengan jumlah dan kualitas yang tepat akan menghasilkan pelet berkualitas. Sedangkan jika pengaturan dan penambahannya tidak tepat, maka kualitas fisik pelet akan rendah dan kemungkinan bisa merusak kandungan nutrisi seperti vitamin dan protein. Penambahan steam yang benar bisa dilakukan di dalam kondisioner dengan mengatur retention time, sudut kemiringan paddle conditioner, kecepatan putaran bearing dan menjaga kualitas steam dari mesin boiler sampai dengan kondisioner.

  10. Parametric study for horizontal steam generator modelling

    Energy Technology Data Exchange (ETDEWEB)

    Ovtcharova, I. [Energoproekt, Sofia (Bulgaria)

    1995-12-31

    In the presentation some of the calculated results of horizontal steam generator PGV - 440 modelling with RELAP5/Mod3 are described. Two nodalization schemes have been used with different components in the steam dome. A study of parameters variation on the steam generator work and calculated results is made in cases with separator and branch.

  11. Acoustic dose and acoustic dose-rate.

    Science.gov (United States)

    Duck, Francis

    2009-10-01

    Acoustic dose is defined as the energy deposited by absorption of an acoustic wave per unit mass of the medium supporting the wave. Expressions for acoustic dose and acoustic dose-rate are given for plane-wave conditions, including temporal and frequency dependencies of energy deposition. The relationship between the acoustic dose-rate and the resulting temperature increase is explored, as is the relationship between acoustic dose-rate and radiation force. Energy transfer from the wave to the medium by means of acoustic cavitation is considered, and an approach is proposed in principle that could allow cavitation to be included within the proposed definitions of acoustic dose and acoustic dose-rate.

  12. Steam-water relative permeability

    Energy Technology Data Exchange (ETDEWEB)

    Ambusso, W.; Satik, C.; Home, R.N. [Stanford Univ., CA (United States)

    1997-12-31

    A set of relative permeability relations for simultaneous flow of steam and water in porous media have been measured in steady state experiments conducted under the conditions that eliminate most errors associated with saturation and pressure measurements. These relations show that the relative permeabilities for steam-water flow in porous media vary approximately linearly with saturation. This departure from the nitrogen/water behavior indicates that there are fundamental differences between steam/water and nitrogen/water flows. The saturations in these experiments were measured by using a high resolution X-ray computer tomography (CT) scanner. In addition the pressure gradients were obtained from the measurements of liquid phase pressure over the portions with flat saturation profiles. These two aspects constitute a major improvement in the experimental method compared to those used in the past. Comparison of the saturation profiles measured by the X-ray CT scanner during the experiments shows a good agreement with those predicted by numerical simulations. To obtain results that are applicable to general flow of steam and water in porous media similar experiments will be conducted at higher temperature and with porous rocks of different wetting characteristics and porosity distribution.

  13. Maintenance of Power Steam Turbine

    OpenAIRE

    Kapelovich, Boris; Khmelnik, Solomon; Kapelovich, David; Benenson, Evgeny

    2008-01-01

    The diagnostics system of the power steam turbine is offered. It can be executed also in the form of telediagnostic system. The system is presented on a site http://turbo.mic34.com/ System engineering can is ordered to authors.

  14. Methane production from steam-exploded bamboo.

    Science.gov (United States)

    Kobayashi, Fumihisa; Take, Harumi; Asada, Chikako; Nakamura, Yoshitoshi

    2004-01-01

    To convert unutilized plant biomass into a useful energy source, methane production from bamboo was investigated using a steam explosion pretreatment. Methane could not be produced from raw bamboo but methane production was enhanced by steam explosion. The maximum amount of methane produced, i.e., about 215 ml, was obtained from 1 g of exploded bamboo at a steam pressure of 3.53 MPa and a steaming time of 5 min. A negative correlation between the amount of methane produced and the amount of Klason lignin was observed in the methane fermentation of steam-exploded bamboo.

  15. Virus-induced gene silencing in detached tomatoes and biochemical effects of phytoene desaturase gene silencing

    NARCIS (Netherlands)

    Romero, I.; Tikunov, Y.M.; Bovy, A.G.

    2011-01-01

    Virus-induced gene silencing (VIGS) is a technology that has rapidly emerged for gene function studies in plants. Many advances have been made in applying this technique in an increasing number of crops. Recently, VIGS has been successfully used to silence genes in tomato fruit through agroinfiltrat

  16. Analysis of pressure oscillations and safety relief valve vibrations in the main steam system of a Boiling Water Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Galbally, David, E-mail: dgalbally@innomerics.com [Innomerics, Calle San Juan de la Cruz 2, 28223 Madrid (Spain); García, Gonzalo [Alava Ingenieros, Calle Albasanz 16, 28037 Madrid (Spain); Hernando, Jesús; Sánchez, Juan de Dios [Iberdrola, Calle Tomás Redondo 1, 28033 Madrid (Spain); Barral, Marcos [Alava Ingenieros, Calle Albasanz 16, 28037 Madrid (Spain)

    2015-11-15

    Highlights: • We analyze the vibratory response of safety relief valves in the main steam system of a Boiling Water Reactor. • We show that valve internals experience acceleration spikes of more than 20 g. • Spikes are caused by impacts between the valve disc and the seating surface of the valve nozzle. • Resonances occur at higher Strouhal numbers than those reported in the literature for tandem side branches. • Valves experience high vibration levels even for resonances caused by second order hydrodynamic modes. - Abstract: Steam flow inside the main steam lines of a Boiling Water Reactor can generate high-amplitude pressure oscillations due to coupling between the separated shear layer at the mouth of the safety relief valves (SRVs) and the acoustic modes of the side branches where the SRVs are mounted. It is known that certain combinations of flow velocities and main steam line geometries are capable of generating self-excited pressure oscillations with very high amplitudes, which can endanger the structural integrity of main steam system components, such as safety valves, or reactor internals such as steam dryers. However, main steam systems may also experience lower amplitude pressure oscillations due, for example, to coupling of higher order hydrodynamic modes with acoustic cavity modes, or to incipient resonances where the free stream velocity is slightly lower than the critical flow velocity required to develop a stable locked-on acoustic resonance. The amplitude of these pressure oscillations is typically insufficient to cause readily observable structural damage to main steam system components, but may still have subtle effects on safety relief valves. The investigation presented in this article focuses on the characterization of the response of SRVs under the effects of pressure oscillations associated with acoustic excitations that are insufficient to cause structural damage to the valves or associated equipment. It is shown that valve

  17. Virus-induced gene silencing in detached tomatoes and biochemical effects of phytoene desaturase gene silencing.

    Science.gov (United States)

    Romero, Irene; Tikunov, Yury; Bovy, Arnaud

    2011-07-01

    Virus-induced gene silencing (VIGS) is a technology that has rapidly emerged for gene function studies in plants. Many advances have been made in applying this technique in an increasing number of crops. Recently, VIGS has been successfully used to silence genes in tomato fruit through agroinfiltration of fruit attached to the plant. The phytoene desaturase (Pds) gene has been widely used as a reporter gene in VIGS experiments, although little is known about the changes that occur due to its silencing in plants. In this paper, we describe the efficient silencing of the Pds gene through the VIGS approach in detached tomato fruits, which makes the VIGS procedure even more versatile and applicable. After 16 days of agroinfiltration, approximately 75% of the tomatoes showed Pds silencing symptoms, although the distribution of silenced areas was variable among fruits. To study the potential effects caused by Pds silencing in detached tomatoes, carotenoids and other semi-polar secondary metabolites were analyzed using Liquid Chromatography-Mass Spectrometry. In addition, potential differences in primary metabolites were analyzed using Gas Chromatography-Mass Spectrometry. The results indicated that the yellow phenotype observed in Pds-silenced fruit was mainly due to the lack of the red-colored lycopene and therefore to a more pronounced contribution of the yellow-orange carotenoids (lutein, violaxanthin, and zeaxanthin) to the final color of the fruits. Furthermore, the biochemical changes observed in Pds-silenced detached tomatoes suggested that carotenoid and other pathways, e.g. leading to alkaloids and flavonoids, might be affected by the silencing of this reporter gene, and this should be taken into consideration for future experimental designs.

  18. Epigenetic chromatin silencing: bistability and front propagation

    Science.gov (United States)

    Sedighi, Mohammad; Sengupta, Anirvan M.

    2007-12-01

    The role of post-translational modification of histones in eukaryotic gene regulation is well recognized. Epigenetic silencing of genes via heritable chromatin modifications plays a major role in cell fate specification in higher organisms. We formulate a coarse-grained model of chromatin silencing in yeast and study the conditions under which the system becomes bistable, allowing for different epigenetic states. We also study the dynamics of the boundary between the two locally stable states of chromatin: silenced and unsilenced. The model could be of use in guiding the discussion on chromatin silencing in general. In the context of silencing in budding yeast, it helps us understand the phenotype of various mutants, some of which may be non-trivial to see without the help of a mathematical model. One such example is a mutation that reduces the rate of background acetylation of particular histone side chains that competes with the deacetylation by Sir2p. The resulting negative feedback due to a Sir protein depletion effect gives rise to interesting counter-intuitive consequences. Our mathematical analysis brings forth the different dynamical behaviors possible within the same molecular model and guides the formulation of more refined hypotheses that could be addressed experimentally.

  19. Is silence golden? Effects of auditory stimuli and their absence on adult hippocampal neurogenesis.

    Science.gov (United States)

    Kirste, Imke; Nicola, Zeina; Kronenberg, Golo; Walker, Tara L; Liu, Robert C; Kempermann, Gerd

    2015-03-01

    We have previously hypothesized that the reason why physical activity increases precursor cell proliferation in adult neurogenesis is that movement serves as non-specific signal to evoke the alertness required to meet cognitive demands. Thereby a pool of immature neurons is generated that are potentially recruitable by subsequent cognitive stimuli. Along these lines, we here tested whether auditory stimuli might exert a similar non-specific effect on adult neurogenesis in mice. We used the standard noise level in the animal facility as baseline and compared this condition to white noise, pup calls, and silence. In addition, as patterned auditory stimulus without ethological relevance to mice we used piano music by Mozart (KV 448). All stimuli were transposed to the frequency range of C57BL/6 and hearing was objectified with acoustic evoked potentials. We found that except for white noise all stimuli, including silence, increased precursor cell proliferation (assessed 24 h after labeling with bromodeoxyuridine, BrdU). This could be explained by significant increases in BrdU-labeled Sox2-positive cells (type-1/2a). But after 7 days, only silence remained associated with increased numbers of BrdU-labeled cells. Compared to controls at this stage, exposure to silence had generated significantly increased numbers of BrdU/NeuN-labeled neurons. Our results indicate that the unnatural absence of auditory input as well as spectrotemporally rich albeit ethological irrelevant stimuli activate precursor cells-in the case of silence also leading to greater numbers of newborn immature neurons-whereas ambient and unstructured background auditory stimuli do not.

  20. Study of acoustic correlates associate with emotional speech

    Science.gov (United States)

    Yildirim, Serdar; Lee, Sungbok; Lee, Chul Min; Bulut, Murtaza; Busso, Carlos; Kazemzadeh, Ebrahim; Narayanan, Shrikanth

    2004-10-01

    This study investigates the acoustic characteristics of four different emotions expressed in speech. The aim is to obtain detailed acoustic knowledge on how a speech signal is modulated by changes from neutral to a certain emotional state. Such knowledge is necessary for automatic emotion recognition and classification and emotional speech synthesis. Speech data obtained from two semi-professional actresses are analyzed and compared. Each subject produces 211 sentences with four different emotions; neutral, sad, angry, happy. We analyze changes in temporal and acoustic parameters such as magnitude and variability of segmental duration, fundamental frequency and the first three formant frequencies as a function of emotion. Acoustic differences among the emotions are also explored with mutual information computation, multidimensional scaling and acoustic likelihood comparison with normal speech. Results indicate that speech associated with anger and happiness is characterized by longer duration, shorter interword silence, higher pitch and rms energy with wider ranges. Sadness is distinguished from other emotions by lower rms energy and longer interword silence. Interestingly, the difference in formant pattern between [happiness/anger] and [neutral/sadness] are better reflected in back vowels such as /a/(/father/) than in front vowels. Detailed results on intra- and interspeaker variability will be reported.

  1. COMPUTATIONAL FLUID DYNAMIC ANALYSIS OF INTERMEDIATE PRESSURE STEAM TURBINE

    OpenAIRE

    C RAJESH BABU

    2013-01-01

    a steam prime mover with rotary motion of the driving element, or rotor, and continuous operation. It converts the thermal energy of steam into mechanical work. The steam flow proceeds through directing devices and impinges on curved blades mounted along the periphery of the rotor. By exerting a force on the blades, the steam flow causes the rotor to rotate. Unlike the reciprocating steam engine, the steam turbine makes use of the kinetic rather than the potential energy of steam. The perform...

  2. Silence as a Response to Everyday Violence

    DEFF Research Database (Denmark)

    Gammeltoft, Tine

    2016-01-01

    Across the world, existing research indicates that many women respond with silence to marital abuse. This article offers an ethnographic investigation of the social and psychic forces behind Vietnamese women’s silencing of violence and a theoretical exploration of how the psychoanalytic concept...... of fantasy—understood as unconscious or subconscious mental processes—may contribute to the analysis of everyday violence and psychic distress. Distinguishing between what I term deliberate and subconscious silence, I explore the role that fantasy plays when Vietnamese women silently endure intimate partner...... violence. Closer ethnographic attention to the fantasy-constructions that sustain day-to-day lives can, I argue, strengthen the capacity of anthropology to comprehend how systems of everyday violence are upheld and rendered socially invisible....

  3. Bioengineering RNA silencing across the life kingdoms.

    Science.gov (United States)

    Alvarez-Fernandez, R; Lopez-Gomollon, S; Lopez-Martinez, A F; Nicolas, F E

    2011-08-01

    RNA silencing negatively regulates gene expression at transcriptional and posttranscriptional levels, guided by small RNA molecules. It modulates core regulatory pathways across the eukaryotes, such as developmental processes or stress responses. The widespread existence of this phenomenon and the key pathways regulated have led to the development of a new technology based on the modification of gene expression, which has been applied successfully in different areas such as medicine or agriculture. Here we review the most important patents related to RNA silencing across the life kingdoms, including biotechnological applications into medicine, crop science and bioengineering.

  4. Use of acoustic vortices in acoustic levitation

    DEFF Research Database (Denmark)

    Cutanda Henriquez, Vicente; Santillan, Arturo Orozco; Juhl, Peter Møller

    2009-01-01

    Acoustic fields are known to exert forces on the surfaces of objects. These forces are noticeable if the sound pressure is sufficiently high. Two phenomena where acoustic forces are relevant are: i) acoustic levitation, where strong standing waves can hold small objects at certain positions......, counterbalancing their weight, and ii) acoustic vortices, spinning sound fields that can impinge angular momentum and cause rotation of objects. In this contribution, both force-creating sound fields are studied by means of numerical simulations. The Boundary Element Method is employed to this end. The simulation...... of acoustical vortices uses an efficient numerical implementation based on the superposition of two orthogonal sound fields with a delay of 90° between them. It is shown that acoustic levitation and the use of acoustic vortices can be combined to manipulate objects in an efficient and controlled manner without...

  5. Acoustic cryocooler

    Science.gov (United States)

    Swift, Gregory W.; Martin, Richard A.; Radenbaugh, Ray

    1990-01-01

    An acoustic cryocooler with no moving parts is formed from a thermoacoustic driver (TAD) driving a pulse tube refrigerator (PTR) through a standing wave tube. Thermoacoustic elements in the TAD are spaced apart a distance effective to accommodate the increased thermal penetration length arising from the relatively low TAD operating frequency in the range of 15-60 Hz. At these low operating frequencies, a long tube is required to support the standing wave. The tube may be coiled to reduce the overall length of the cryocooler. One or two PTR's are located on the standing wave tube adjacent antinodes in the standing wave to be driven by the standing wave pressure oscillations. It is predicted that a heat input of 1000 W at 1000 K will maintian a cooling load of 5 W at 80 K.

  6. An installation for steam conversion of gases

    Energy Technology Data Exchange (ETDEWEB)

    Tabata, K.; Matsumoto, I.

    1983-01-28

    An installation is proposed for steam conversion of a hydrocarbon gas in order to produce an inorganic gas which chiefly consists of H2 and CO in which the line for feeding the hydrocarbon gas has a steam generator which has a microcapillary structure made of sponge metal, inorganic heat resistant fibers of glass, Si02, Al203 or carbon, inorganic heat resistant fibers twisted into a fiber or a cord of multipore ceramic material; the installation is equipped with a heater which regulates the water temperature, in which the steam generator is submerged. The installation is designed for converting natural gas, C3H8, other hydrocarbon gases and vapors of liquid hydrocarbons (Uv) into H2 and CO. The design and disposition of the steam generator simplify the design of the device, eliminating the pump for feeding the steam and the device for premixing of the steam and hydrocarbon gas.

  7. Surprised by Bird, Bard, and Bach: Language, Silence, and Transcendence.

    Science.gov (United States)

    Suhor, Charles

    1991-01-01

    Argues the importance of the relationships among silence and literature, the arts, and other experiences that point toward transcendence. Suggests that English teachers can expand the repertoire of classroom activities and teaching techniques that make use of silence. (KEH)

  8. Acoustic telemetry.

    Energy Technology Data Exchange (ETDEWEB)

    Drumheller, Douglas Schaeffer; Kuszmaul, Scott S.

    2003-08-01

    Broadcasting messages through the earth is a daunting task. Indeed, broadcasting a normal telephone conversion through the earth by wireless means is impossible with todays technology. Most of us don't care, but some do. Industries that drill into the earth need wireless communication to broadcast navigation parameters. This allows them to steer their drill bits. They also need information about the natural formation that they are drilling. Measurements of parameters such as pressure, temperature, and gamma radiation levels can tell them if they have found a valuable resource such as a geothermal reservoir or a stratum bearing natural gas. Wireless communication methods are available to the drilling industry. Information is broadcast via either pressure waves in the drilling fluid or electromagnetic waves in the earth and well tubing. Data transmission can only travel one way at rates around a few baud. Given that normal Internet telephone modems operate near 20,000 baud, these data rates are truly very slow. Moreover, communication is often interrupted or permanently blocked by drilling conditions or natural formation properties. Here we describe a tool that communicates with stress waves traveling through the steel drill pipe and production tubing in the well. It's based on an old idea called Acoustic Telemetry. But what we present here is more than an idea. This tool exists, it's drilled several wells, and it works. Currently, it's the first and only acoustic telemetry tool that can withstand the drilling environment. It broadcasts one way over a limited range at much faster rates than existing methods, but we also know how build a system that can communicate both up and down wells of indefinite length.

  9. Determination of steam wetness in the steam-generating equipment of nuclear power plants

    Science.gov (United States)

    Gorburov, V. I.; Gorburov, D. V.; Kuz'min, A. V.

    2012-05-01

    Calculation and experimental methods for determining steam wetness in horizontal steam generators for nuclear power stations equipped with VVER reactors, namely, the classic salt technique and calculations based on operating parameters are discussed considered and compared.

  10. Veiled Word(s) – Sacred Silence

    DEFF Research Database (Denmark)

    Isar, Nicoletta

    2014-01-01

    or secret prayer, and divine silence, which are at the very centre of the Byzantine altar. The main focus is to investigate the liminal nature of the Mystery, manifested through concealing-revealing devices, which are thresholds in the liturgical participation of the Byzantine subject. Fear and secrecy...

  11. The Analysis of Silence in Conflict Talk with Face Theory

    Institute of Scientific and Technical Information of China (English)

    罗丹

    2016-01-01

    Silence and noisy speech can be functionally equivalent in the conflict. Sometimes the more serious the problem is, the more likely that conversationalists will use silence in the utterance because silence stops conflict evolving into violence. In the context of potentially explosive arguments, pauses or silences prevent the conflict from exploding and destroying the possibility of continuing the relationship. Thus the participant’s face will be saved.

  12. Loss of feed flow, steam generator tube rupture and steam line break thermohydraulic experiments

    Energy Technology Data Exchange (ETDEWEB)

    Mendler, O J; Takeuchi, K; Young, M Y

    1986-10-01

    The Westinghouse Model Boiler No. 2 (MB-2) steam generator test model at the Engineering Test Facility in Tampa, Florida, was reinstrumented and modified for performing a series of tests simulating steam generator accident transients. The transients simulated were: loss of feed flow, steam generator tube rupture, and steam line break events. This document presents a description of (1) the model boiler and the associated test facility, (2) the tests performed, and (3) the analyses of the test results.

  13. The Differences of Silence between Chinese and American Culture

    Institute of Scientific and Technical Information of China (English)

    巩飞

    2015-01-01

    Language is an important means of human communication; and silence can also convey a wealth of information.This paper will interpret the different definitions of silence phenomena between China and America and two different attitudes and representations of silence.It will help us to improve the effectiveness of communication.

  14. Complete Genome Sequence of Bacillus megaterium Siphophage Silence

    OpenAIRE

    Solis, Jonathan A.; Farmer, Nicholas G.; Cahill, Jesse L.; Rasche, Eric S.; Kuty Everett, Gabriel F.

    2015-01-01

    Silence is a newly isolated siphophage that infects Bacillus megaterium, a soil bacterium that is used readily in research and commercial applications. A study of B. megaterium phage Silence will enhance our knowledge of the diversity of Bacillus phages. Here, we describe the complete genome sequence and annotated features of Silence.

  15. An Empirical Study on English Majors’Silence in Class

    Institute of Scientific and Technical Information of China (English)

    Zhao Lingzhi

    2014-01-01

    This paper aims to investigate the causes of English majors' silence in class and whether task-based approach can reduce silence by conducting an empirical study.The results indicates that students' self-esteem,motivation,personality and teachers' authority are the main causes of students' silence in class.

  16. An Empirical Study on English Majors’ Silence in Class

    Institute of Scientific and Technical Information of China (English)

    Zhao; Lingzhi

    2014-01-01

    This paper aims to investigate the causes of English majors’silence in class and whether task-based approach can reduce silence by conducting an empirical study.The results indicates that students’self-esteem,motivation,personality and teachers’authority are the main causes of students’silence in class.

  17. Unpacking the Unspoken: Silence in Collective Memory and Forgetting

    Science.gov (United States)

    Vinitzky-Seroussi, Vered; Teeger, Chana

    2010-01-01

    Collective memory quite naturally brings to mind notions of mnemonic speech and representation. In this article, however, we propose that collective silences be thought of as a rich and promising arena through which to understand how groups deal with their collective pasts. In so doing, we explore two types of silence: overt silence and covert…

  18. The Sound of Silence: The Case of Virtual Team Organising

    Science.gov (United States)

    Panteli, N.; Fineman, S.

    2005-01-01

    In this paper we discuss the role of silence within a virtual organising context. The paper raises issues related to the construction of silence in the virtual team context and the implications it has on team interactions. By drawing upon existing studies on virtual teams, we argue that members' silence may not always have negative effects on team…

  19. Steam Flooding after Steam Soak in Heavy Oil Reservoirs through Extended-reach Horizontal Wells

    Institute of Scientific and Technical Information of China (English)

    Ning Zhengfu; Liu Huiqing; Zhang Hongling

    2007-01-01

    This paper presents a new development scheme of simultaneous injection and production in a single horizontal well drilled for developing small block reservoirs or offshore reservoirs.It is possible to set special packers within the long completion horizontal interval to establish an injection zone and a production zone.This method can also be used in steam flooding after steam soak through a horizontal well.Simulation results showed that it was desirable to start steam flooding after six steam soaking cycles and at this time the oil/steam ratio was 0.25 and oil recovery efficiency was 23.48%.Steam flooding performance was affected by separation interval and steam injection rate.Reservoir numerical simulation indicated that maximum oil recovery would be achieved at a separation section of 40-50 m at steam injection rate of 100-180 t/d; and the larger the steam injection rate,the greater the water cut and pressure difference between injection zone and production zone.A steam injection rate of 120 t/d was suitable for steam flooding under practical injection-production conditions.All the results could be useful for the guidance of steam flooding projects.

  20. Steam and fuel oil supply and purge valve with cooling steam feature

    Energy Technology Data Exchange (ETDEWEB)

    Buchanan, B.F.; Buchanan, J.R.

    1991-09-17

    This patent describes a steam and fuel oil supply and purge valve. It comprises a valve body defining steam and oil inlet ports, at least one discharge port, a steam purge passageway interconnecting the steam inlet and discharge ports, an oil supply passageway interconnecting the oil inlet and discharge ports, a cooling steam passageway interconnecting the steam inlet and discharge ports, a steam valve and actuator member movable between first, second, third, and fourth positions in the valve body and operable to open and close the steam purge and cooling steam passageways, a small metering passageway in the steam valve and actuator member which is so dimensioned and located as to open prior to full opening movement of the valve member and actuator relative to its seat, an oil valve member movable between first and second positions to open and close the oil supply passageway, biasing means urging the oil valve member toward its second and closed positions, the steam valve and actuator member in its first and second positions respectively closing and opening the steam purge passageway.

  1. Mode-matching without root-finding: application to a dissipative silencer.

    Science.gov (United States)

    Lawrie, Jane B; Kirby, Ray

    2006-04-01

    This article presents an analytic mode-matching approach suitable for modelling the propagation of sound in a two-dimensional, three-part, ducting system. The approach avoids the need to find roots of the characteristic equation for the middle section of the duct (the component) and is readily applicable to a broad class of problems. It is demonstrated that the system of equations, derived via analytic mode-matching, exhibits certain features which ensure that they can be recast into a form that is independent of the roots of the characteristic equation for the component. The precise details of the component are irrelevant to the procedure; it is required only that there exists an orthogonality relation, or similar, for the eigenmodes corresponding to the propagating wave forms in this region. The method is applied here to a simple problem involving acoustic transmission through a dissipative silencer of the type commonly found in heating ventilation and air-conditioning ducts. With reference to this example, the silencer transmission loss is computed, and the power balance for the silencer is investigated and is shown to be an identity that is necessarily satisfied by the system of equations, regardless of the level of truncation.

  2. RPV steam generator pressure boundary

    Energy Technology Data Exchange (ETDEWEB)

    Strosnider, J.

    1996-03-01

    As the types of SG tube degradation affecting PWR SGs has changed, and improvements in tube inspection and repair technology have occurred, current SG regulatory requirements and guidance have become increasingly out of date. This regulatory situation has been dealt with on a plant-specific basis, however to resolve this problem in the long term, the NRC has begun development of a performance-based rule. As currently structured, the proposed steam generator rule would require licensees to implement SG programs that monitor the condition of the steam generator tubes against accepted performance criteria to provide reasonable assurance that the steam generator tubes remain capable of performing their intended safety functions. Currently the staff is developing three performance criteria that will ensure the tubes can continue to perform their safety function and therefore satisfy the SG rule requirements. The staff, in developing the criteria, is striving to ensure that the performance criteria have the two key attributes of being (1) measurable (enabling the tube condition to be {open_quotes}measured{close_quotes} against the criteria) and (2) tolerable (ensuring that failures to meet the criteria do not result in unacceptable consequences). A general description of the criteria are: (1) Structural integrity criteria: Ensures that the structural integrity of the SG tubes is maintained for the operating cycle consistent with the margins intended by the ASME Code. (2) Leakage integrity criteria: Ensures that postulated accident leakages and the associated dose releases are limited relative to 10 CFR Part 50 guidelines and 10 CFR Part 50 Appendix A GDC 19. (3) Operational leakage criteria: Ensures that the operating unit will be shut down as a defense-in depth measure when operational SG tube leakage exceeds established leakage limits.

  3. Steam microturbines in distributed cogeneration

    CERN Document Server

    Kicinski, Jan

    2014-01-01

    This book presents the most recent trends and concepts in power engineering, especially with regard to prosumer and civic energy generation. In so doing, it draws widely on his experience gained during the development of steam microturbines for use in small combined heat and power stations based on the organic Rankine cycle (CHP-ORC). Major issues concerning the dynamic properties of mechanical systems, in particular rotating systems, are discussed, and the results obtained when using unconventional bearing systems, presented. Modeling and analysis of radial-flow and axial-flow microturbines a

  4. Steam Turbine Materials and Corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, G.H.; Hsu, D.H.

    2008-07-01

    Ultra-supercritical (USC) power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760 °C. In prior years this project examined the steamside oxidation of alloys for use in high- and intermediate-pressure USC turbines. This steamside oxidation research is continuing and progress is presented, with emphasis on chromia evaporation.

  5. Detailed characterization of the posttranscriptional gene-silencing-related small RNA in a GUS gene-silenced tobacco

    NARCIS (Netherlands)

    Hutvágner, G.; Mlynarova, L.; Nap, J.P.H.

    2000-01-01

    Posttranscriptional gene-silencing phenomena such as cosuppression and RNA interference are associated with the occurrence of small, about 21-23 nt short RNA species homologous to the silenced gene. We here show that the small RNA present in silenced transgenic plants can easily be detected in total

  6. Responsive acoustic surfaces

    DEFF Research Database (Denmark)

    Peters, Brady; Tamke, Martin; Nielsen, Stig Anton;

    2011-01-01

    Acoustic performance is defined by the parameter of reverberation time; however, this does not capture the acoustic experience in some types of open plan spaces. As many working and learning activities now take place in open plan spaces, it is important to be able to understand and design...... for the acoustic conditions of these spaces. This paper describes an experimental research project that studied the design processes necessary to design for sound. A responsive acoustic surface was designed, fabricated and tested. This acoustic surface was designed to create specific sonic effects. The design...... was simulated using custom integrated acoustic software and also using Odeon acoustic analysis software. The research demonstrates a method for designing space- and sound-defining surfaces, defines the concept of acoustic subspace, and suggests some new parameters for defining acoustic subspaces....

  7. Springer Handbook of Acoustics

    CERN Document Server

    Rossing, Thomas D

    2007-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and others. The Springer Handbook of Acoustics is an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents spanning: animal acoustics including infrasound and ultrasound, environmental noise control, music and human speech and singing, physiological and psychological acoustics, architectural acoustics, physical and engineering acoustics, signal processing, medical acoustics, and ocean acoustics. This handbook reviews the most important areas of acoustics, with emphasis on current research. The authors of the various chapters are all experts in their fields. Each chapter is richly illustrated with figures and tables. The latest rese...

  8. 2D-simulation of wet steam flow in a steam turbine with spontaneous condensation

    Institute of Scientific and Technical Information of China (English)

    SUN Lan-xin; ZHENG Qun; LIU Shun-long

    2007-01-01

    Removal of condensates from wet steam flow in the last stages of steam turbines significantly promotes stage efficiency and prevents erosion of rotors. In this paper, homogeneous spontaneous condensation in transonic steam flow in the 2-D rotor-tip section of a stage turbine is investigated.Calculated results agree with experimental data reasonably well. On the basis of the above work, a 2-D numerical simulation of wet steam flow in adjacent root sections of a complex steam turbine stage was carried out. Computational results were analyzed and provide insights into effective removal of humidity.

  9. Modelling 3D Steam Turbine Flow Using Thermodynamic Properties of Steam Iapws-95

    Directory of Open Access Journals (Sweden)

    Rusanow A.V.

    2016-01-01

    Full Text Available An approach to approximate equations of state for water and steam (IAPWS-95 for the calculation of three-dimensional flows of steam in turbomachinery in a range of operation of the present and future steam turbines is described. Test calculations of three-dimensional viscous flow in an LP steam turbine using various equations of state (perfect gas, Van der Waals equation, equation of state for water and steam IAPWS-95 are made. The comparison of numerical results with experimental data is also presented.

  10. Acoustic Spatiality

    Directory of Open Access Journals (Sweden)

    Brandon LaBelle

    2012-06-01

    Full Text Available Experiences of listening can be appreciated as intensely relational, bringing us into contact with surrounding events, bodies and things. Given that sound propagates and expands outwardly, as a set of oscillations from a particular source, listening carries with it a sensual intensity, whereby auditory phenomena deliver intrusive and disruptive as well as soothing and assuring experiences. The physicality characteristic of sound suggests a deeply impressionistic, locational "knowledge structure" – that is, the ways in which listening affords processes of exchange, of being in the world, and from which we extend ourselves. Sound, as physical energy reflecting and absorbing into the materiality around us, and even one's self, provides a rich platform for understanding place and emplacement. Sound is always already a trace of location.Such features of auditory experience give suggestion for what I may call an acoustical paradigm – how sound sets in motion not only the material world but also the flows of the imagination, lending to forces of signification and social structure, and figuring us in relation to each other. The relationality of sound brings us into a steady web of interferences, each of which announces the promise or problematic of being somewhere.

  11. Acoustic Neurinomas

    Directory of Open Access Journals (Sweden)

    Mohammad Faraji Rad

    2011-01-01

    Full Text Available Acoustic neuromas (AN are schwann cell-derived tumors that commonly arise from the vestibular portion of the eighth cranial nerve also known as vestibular schwannoma(VS causes unilateral hearing loss, tinnitus, vertigo and unsteadiness. In many cases, the tumor size may remain unchanged for many years following diagnosis, which is typically made by MRI. In the majority of cases the tumor is small, leaving the clinician and patient with the options of either serial scanning or active treatment by gamma knife radiosurgery (GKR or microneurosurgery. Despite the vast number of published treatment reports, comparative studies are few. The predominant clinical endpoints of AN treatment include tumor control, facial nerve function and hearing preservation. Less focus has been put on symptom relief and health-related quality of life (QOL. It is uncertain if treating a small tumor leaves the patient with a better chance of obtaining relief from future hearing loss, vertigo or tinnitus than by observing it without treatment.   In this paper we review the literature for the natural course, the treatment alternatives and the results of AN. Finally, we present our experience with a management strategy applied for more than 30 years.

  12. Silence:An Effective Resistance in"No Name Woman"

    Institute of Scientific and Technical Information of China (English)

    戴淑琴

    2016-01-01

    "No Name Woman", written by Maxine Hong Kingston, depicts different life of Chinese or Chinese American women. They go through different life experiences, but their life experiences reflect the same attitude toward life that is silence. Is si-lence effective or not? By analyzing the textual contents, life experience of the aunt combining with contemporary social envi-ronment, the paper argues that silence is an effective resistance against patriarchal system. It illuminates the ways that resistance not only relies on violence, but also on silence and sometimes silence is more powerful than violence.

  13. Steam chemistry - interaction of chemical species with water, steam, and materials during evaporation, superheating, and condensation. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Topics of this proceedings are: steam chemistry, supercritical water, effects of chemicals in steam (acetic acid, formic acid, phosphoric acid or other impurities); solubility and deposition, condensation processes and effect of impurities; nucleation; gas-liquid interfaces; steam treatment. (SR)

  14. Optimizing steam flood performance utilizing a new and highly accurate two phase steam measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Huff, B. D.; Warren, P. B. [CalResources LLC (Canada); Whorff, F. [ITT Barton (Canada)

    1995-11-01

    The development of a two phase steam measurement system was documented. The system consists of a `V` cone differential pressure device and a vortex meter velocity device in series through which the steam flows. Temperature and pressure sensors are electronically interfaced with a data logging system. The design was described as being very simple and rugged, consequently, well suited to monitoring in the field.. Steam quality measurements were made in the Kern River Field and the Coalinga Field thermal projects using a surface steam separator. In steam flood operations, steam cost is very high, hence appropriate distribution of the steam can result in significant cost reduction. This technology allows the measurement of steam flow and quality at any point in the steam distribution system. The metering system`s orifice meter was found to have a total average error of 45%, with 25% of that attributable to `cold leg` problem. Installation of the metering system was expected to result in a steam use reduction of 8%, without any impact on production. Steam re-distribution could result in a potential oil production increase of 10%. 12 refs., 8 tabs., 9 figs.

  15. Acoustic source for generating an acoustic beam

    Energy Technology Data Exchange (ETDEWEB)

    Vu, Cung Khac; Sinha, Dipen N.; Pantea, Cristian

    2016-05-31

    An acoustic source for generating an acoustic beam includes a housing; a plurality of spaced apart piezo-electric layers disposed within the housing; and a non-linear medium filling between the plurality of layers. Each of the plurality of piezoelectric layers is configured to generate an acoustic wave. The non-linear medium and the plurality of piezo-electric material layers have a matching impedance so as to enhance a transmission of the acoustic wave generated by each of plurality of layers through the remaining plurality of layers.

  16. Destructive Role of Employee Silence in Organizational Success

    Directory of Open Access Journals (Sweden)

    Malikeh Beheshtifar

    2012-11-01

    Full Text Available Employees are regarded as major sources of change, creativity, learning, and innovation, which are critical factors to the success of organizations. However, many employees choose not to voice their opinions and concerns about matters in their organizations. Silence can convey approval and sharing or disfavor and opposition, thus becoming a pressure mechanism for both individuals and organizations. Through silence, organizational members suppress concerns about difficult or troubling personal as well as organizational issues. Moreover, there are three types of employee silence as Acquiescent Silence, Defensive Silence, and Pro-social Silence. Fear, embarrassment, narrow conceptions of ethical responsibility, implicated friends, lack of opportunity for voice, and lack of organizational political skills are factors to cause silence. Employee silence has many effects on the employees themselves. Indifferent employees, often products of ignored employee silence, tend to feel like cogs at machinery factories, developing the attitude “to get along, go along”. Indifferent employees cause the organization to lose money and function poorly. If employee silence does occur, communication suffers and as a result harms the overall functioning of the organization. However, it is not easy to break silence climate of employees and their managers. Meanwhile, it is suggested to regulate some rules for supporting the employees' attitudes, to make decisions about the work groups of the organizations and to establish some programs in order to improve the human resource management for training skills of decision – making.

  17. The Invention of the Steam Engine

    NARCIS (Netherlands)

    Van der Kooij, B.J.G.

    2015-01-01

    This casestudy is a historic analysis of the developments that resulted in the steam engine. The range of inventions that started with Savery's 'Miner's Friend' (a water pump to solve the dramatic water problem in the British eighteenth century mines) over a century culminated in the steam engine us

  18. Future trends in steam coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, G.A. [IEA Coal Research, London (United Kingdom)

    2000-07-01

    After reviewing the history of coal production in important regions of the world and the evolution of the international steam coal trade, the paper examines the main drivers behind the future use of steam coal and looks at, from past evidence and current perception, how these may shape the future. The four main drivers are social issues, strategic issues, competitiveness issues, and environmental issues.

  19. Steam generated conversion coating on aluminium alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan

    pressure steam produced by an autoclave at a temperature of 107 – 121 °C and pressure of 15 -17 psi for 10 minutes to produce a thin coating of aluminium oxide. The aim of this study is to understand the effect of high pressure steam with and without different chemical additives on surface morphology...

  20. Third international seminar on horizontal steam generators

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Third International Seminar on Horizontal Steam Generators held on October 18-20, 1994 in Lappeenranta, consisted of six sessions dealing with the topics: thermal hydraulic experiments and analyses, primary collector integrity, management of primary-to-secondary leakage accidents, feedwater collector replacement and discussion of VVER-440 steam generator safety issues.

  1. Canonical Acoustics and Its Application to Surface Acoustic Wave on Acoustic Metamaterials

    Science.gov (United States)

    Shen, Jian Qi

    2016-08-01

    In a conventional formalism of acoustics, acoustic pressure p and velocity field u are used for characterizing acoustic waves propagating inside elastic/acoustic materials. We shall treat some fundamental problems relevant to acoustic wave propagation alternatively by using canonical acoustics (a more concise and compact formalism of acoustic dynamics), in which an acoustic scalar potential and an acoustic vector potential (Φ ,V), instead of the conventional acoustic field quantities such as acoustic pressure and velocity field (p,u) for characterizing acoustic waves, have been defined as the fundamental variables. The canonical formalism of the acoustic energy-momentum tensor is derived in terms of the acoustic potentials. Both the acoustic Hamiltonian density and the acoustic Lagrangian density have been defined, and based on this formulation, the acoustic wave quantization in a fluid is also developed. Such a formalism of acoustic potentials is employed to the problem of negative-mass-density assisted surface acoustic wave that is a highly localized surface bound state (an eigenstate of the acoustic wave equations). Since such a surface acoustic wave can be strongly confined to an interface between an acoustic metamaterial (e.g., fluid-solid composite structures with a negative dynamical mass density) and an ordinary material (with a positive mass density), it will give rise to an effect of acoustic field enhancement on the acoustic interface, and would have potential applications in acoustic device design for acoustic wave control.

  2. Steam reforming of light oxygenates

    DEFF Research Database (Denmark)

    Trane-Restrup, Rasmus; Resasco, Daniel E; Jensen, Anker Degn

    2013-01-01

    Steam reforming (SR) of ethanol, acetic acid, acetone, acetol, 1-propanol, and propanal has been investigated over Ni/MgAl2O4 at temperatures between 400 and 700 degrees C and at a steam-to-carbon-ratio (S/C) of 6. The yield of H-2 and conversion increased with temperature, while the yield of by-products...... decreased with temperature in the SR of the investigated compounds. The yield of H2 approached the thermodynamic limit at the highest temperatures investigated. No significant differences in conversion as a function of temperature among the different model compounds were observed. However, the product...... distribution depended on the model compound, and C-3-oxygenates produced a larger fraction of by-products compared to C-2-oxygenates. Temperatures of 600 degrees C or above were generally needed to minimize the fraction of by-products and obtain a syngas containing mainly CO, CO2, H-2, and H2O with only traces...

  3. Steam generator tubing NDE performance

    Energy Technology Data Exchange (ETDEWEB)

    Henry, G. [Electric Power Research Institute, Charlotte, NC (United States); Welty, C.S. Jr. [Electric Power Research Institute, Palo Alto, CA (United States)

    1997-02-01

    Steam generator (SG) non-destructive examination (NDE) is a fundamental element in the broader SG in-service inspection (ISI) process, a cornerstone in the management of PWR steam generators. Based on objective performance measures (tube leak forced outages and SG-related capacity factor loss), ISI performance has shown a continually improving trend over the years. Performance of the NDE element is a function of the fundamental capability of the technique, and the ability of the analysis portion of the process in field implementation of the technique. The technology continues to improve in several areas, e.g. system sensitivity, data collection rates, probe/coil design, and data analysis software. With these improvements comes the attendant requirement for qualification of the technique on the damage form(s) to which it will be applied, and for training and qualification of the data analysis element of the ISI process on the field implementation of the technique. The introduction of data transfer via fiber optic line allows for remote data acquisition and analysis, thus improving the efficiency of analysis for a limited pool of data analysts. This paper provides an overview of the current status of SG NDE, and identifies several important issues to be addressed.

  4. Brush Seals for Improved Steam Turbine Performance

    Science.gov (United States)

    Turnquist, Norman; Chupp, Ray; Baily, Fred; Burnett, Mark; Rivas, Flor; Bowsher, Aaron; Crudgington, Peter

    2006-01-01

    GE Energy has retrofitted brush seals into more than 19 operating steam turbines. Brush seals offer superior leakage control compared to labyrinth seals, owing to their compliant nature and ability to maintain very tight clearances to the rotating shaft. Seal designs have been established for steam turbines ranging in size from 12 MW to over 1200 MW, including fossil, nuclear, combined-cycle and industrial applications. Steam turbines present unique design challenges that must be addressed to ensure that the potential performance benefits of brush seals are realized. Brush seals can have important effects on the overall turbine system that must be taken into account to assure reliable operation. Subscale rig tests are instrumental to understanding seal behavior under simulated steam-turbine operating conditions, prior to installing brush seals in the field. This presentation discusses the technical challenges of designing brush seals for steam turbines; subscale testing; performance benefits of brush seals; overall system effects; and field applications.

  5. Strategic maintenance plan for Cernavoda steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Cicerone, T. [CNE-PROD, Cernavoda (Romania); Dhar, D.; VandenBerg, J.P. [Babcock and Wilcox (Canada)

    2002-07-01

    Steam generators are among the most important pieces of equipment in a nuclear power plant. They are required full time during the plant operation and obviously no redundancy exists. Past experience has shown that those utilities which implemented comprehensive steam generator inspection and maintenance programs and strict water chemistry controls, have had good steam generator performance that supports good overall plant performance. The purpose of this paper is to discuss a strategic Life Management and Operational-monitoring program for the Cernavoda steam generators. The program is first of all to develop a base of expertise for the management of the steam generator condition; and that is to be supported by a program of actions to be accomplished over time to assess their condition, to take measures to avoid degradation and to provide for inspections, cleaning and modifications as necessary. (author)

  6. Hard sludge removal in steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Santibanez, M.; Stoss, J.

    2013-07-01

    One of the majors problems during the life of Nuclear power plants is the efficiency lost in steam generator due to, among issues, the plugging and therefore useless, of tubes which presented possibility of cracking in the future. The hard sludge produced in the steam generators secondary side and deposited on the tube sheet or around the tubes as collar shape are one of the main agent causing this problem, so their elimination is considered a major topic in order to keep the steam generators in an optimum condition along the whole plant life. AREVA is aware of this global problem, therefore a process and tools have been continuously developed since 1995 in order to eliminate the hard deposits in a effective way, with no damage to steam generator's components and adaptable for the different steam generators models existing in the market.

  7. Research on Mechanisms of Steam Breakthrough and Profile Control Design for Steam Soaking Well

    Institute of Scientific and Technical Information of China (English)

    Liu Huiqing; Zhang Hongling; Wang Shulin; Wang Han; Bao Shucheng

    2006-01-01

    Scaled physical model tests for steam breakthrough were conducted based on the analysis of mechanisms and influence factors of steam breakthrough. Physical simulation results showed that at the initial steam breakthrough, preferential flow channels were formed in narrow sand packs and most residual oil left in these channels was immobile. This shortened the steam breakthrough time of follow-up steam flooding and decreased the increment of oil recovery efficiency. Steam breakthrough occurred easily for a smaller producer-injector spacing, and a bigger difference in physical properties between fluids and rock. Steam breakthrough is more likely to occur at a larger formation permeability (k), greater steam displacement velocity (u) and smaller producer-injector spacing (L). Steam breakthrough time is a function of the parameter group (uk/L), i.e. tb=3.2151 (uk/L) -0.5142. A non piston-like displacement model was built based on steam breakthrough observation for a steam stimulated well in the Jinglou Oilfield, Henan Oilfield Company. The steam volume swept in different directions could be obtained from inter-well permeability capacity and breakthrough angle, and the steam swept pore volume (SSPV) was also determined. Numerical simulation showed that steam sweep efficiency reached its peak value when a slug of profile control agent (slug size 10%-15% SSPV) was set at one half of the inter-well spacing. Field test with 12.5% SSPV of profile control agents in the Jinglou Oilfield achieved success in sealing breakthrough channels and good production performance of adjacent producers.

  8. Microbial activity in soils following steam treatment.

    Science.gov (United States)

    Richardson, Ruth E; James, C Andrew; Bhupathiraju, Vishvesh K; Alvarez-Cohen, Lisa

    2002-01-01

    Steam enhanced extraction (SEE) is an aquifer remediation technique that can be effective at removing the bulk of non-aqueous phase liquid (NAPL) contamination from the subsurface, particularly highly volatile contaminants. However, low volatility compounds such as polynuclear aromatic hydrocarbons (PAHs) are less efficiently removed by this process. This research evaluated the effects of steam injection on soil microbial activity, community structure, and the potential for biodegradation of contaminants following steam treatment. Three different soils were evaluated: a laboratory-prepared microbially-enriched soil, soil from a creosote contaminated field site, and soil from a chlorinated solvent and waste oil contaminated field site. Results from field-scale steaming are also presented. Microbial activity before and after steam treatment was evaluated using direct epifluorescent microscopy (DEM) using the respiratory activity dye 5-cyano-2,3, ditolyl tetrazolium chloride (CTC) in conjunction with the fluorochrome 5-(4,6-dichlorotriazinyl) aminofluorescein (DTAF) to yield a quantitative assessment of active and total microbial numbers. DEM results indicate that steamed soils that were analyzed while still hot exhibited microbial activity levels that were below detection. However, soil samples that were slowly cooled, more closely reflecting the conditions of applied SEE, exhibited microbial activity levels that were comparable to presteamed soils. Samples from a field-site where steam was applied continuously for 6 weeks also showed high levels of microbial activity following cooling. The metabolic capabilities of the steamed communities were investigated by measuring cell growth in enrichment cultures on various substrates. These studies provided evidence that organisms capable of biodegradation were among the mesophilic populations that survived steam treatment. Fluorescent in situ hybridization (FISH) analysis of the soils with domain-level rRNA probes suggest

  9. Experimental studies of a drumlike silencer.

    Science.gov (United States)

    Choy, Y S; Huang, Lixi

    2002-11-01

    The theoretical finding of the broadband performance of a reactive silencer is validated experimentally. The silencer consists of two highly stretched membranes lining part of the duct and backed by two long and shallow cavities. The test rig was built with a small square duct of 5 cm in dimension, and each cavity is 5 cm deep and 25 cm long. Two types of metal foils, stainless steel and copper, were used, and the lowest membrane-to-air mass ratio was 1.3. A transmission loss in excess of 10 dB was achieved over more than one octave band. For one configuration close to the optimal parameters, the predicted ratio of the frequency band limits is 2.47, while the experiment gave 2.35. Three spectral peaks were found in the stopband, as predicted, but the peaks were broader than prediction, indicating the presence of significant sound energy dissipation mechanisms. Comparison with theoretical simulation shows that the cavity damping dominates over membrane friction. Tests using heavier membranes and membrane with different levels of tension also agree with predictions. Issues of practical implementation of the concept as a flow-through silencer are also addressed.

  10. Atlantic Herring Acoustic Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NEFSC Advanced Sampling Technologies Research Group conducts annual fisheries acoustic surveys using state-of-the-art acoustic, midwater trawling, and underwater...

  11. Acoustic Communications (ACOMMS) ATD

    Science.gov (United States)

    2016-06-14

    develop and demonstrate emerging undersea acoustic communication technologies at operationally useful ranges and data rates. The secondary objective...Technology Demonstration program (ACOMMS ATD) was to demonstrate long range and moderate data rate underwater acoustic communications between a submarine...moderate data rate acoustic communications capability for tactical use between submarines, surface combatants, unmanned undersea vehicles (UUVs), and other

  12. Tutorial on architectural acoustics

    Science.gov (United States)

    Shaw, Neil; Talaske, Rick; Bistafa, Sylvio

    2002-11-01

    This tutorial is intended to provide an overview of current knowledge and practice in architectural acoustics. Topics covered will include basic concepts and history, acoustics of small rooms (small rooms for speech such as classrooms and meeting rooms, music studios, small critical listening spaces such as home theatres) and the acoustics of large rooms (larger assembly halls, auditoria, and performance halls).

  13. Analysis of experimental characteristics of multistage steam-jet electors of steam turbines

    Science.gov (United States)

    Aronson, K. E.; Ryabchikov, A. Yu.; Brodov, Yu. M.; Brezgin, D. V.; Zhelonkin, N. V.; Murmanskii, I. B.

    2017-02-01

    A series of questions for specification of physical gas dynamics model in flow range of steam-jet unit and ejector computation methodology, as well as functioning peculiarities of intercoolers, was formulated based on analysis of experimental characteristics of multistage team-jet steam turbines. It was established that coefficient defining position of critical cross-section of injected flow depends on characteristics of the "sound tube" zone. Speed of injected flow within this tube may exceed that of sound, and pressure jumps in work-steam decrease at the same time. Characteristics of the "sound tube" define optimal axial sizes of the ejector. According to measurement results, the part of steam condensing in the first-stage coolant constitutes 70-80% of steam amount supplied into coolant and is almost independent of air content in steam. Coolant efficiency depends on steam pressure defined by operation of steam-jet unit of ejector of the next stage after coolant of steam-jet stage, temperature, and condensing water flow. As a rule, steam entering content of steam-air mixture supplied to coolant is overheated with respect to saturation temperature of steam in the mixture. This should be taken into account during coolant computation. Long-term operation causes changes in roughness of walls of the ejector's mixing chamber. The influence of change of wall roughness on ejector characteristic is similar to the influence of reverse pressure of the steam-jet stage. Until some roughness value, injection coefficient of the ejector stage operating in superlimiting regime hardly changed. After reaching critical roughness, the ejector switches to prelimiting operating regime.

  14. Failure analysis of retired steam generator tubings

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hong Pyo; Kim, J. S.; Hwang, S. S. and others

    2005-04-15

    Degradation of steam generator leads to forced outage and extension of outage, which causes increase in repair cost, cost of purchasing replacement power and radiation exposure of workers. Steam generator tube rupture incident occurred in Uljin 4 in 2002, which made public sensitive to nuclear power plant. To keep nuclear energy as a main energy source, integrity of steam generator should be demonstrated. Quantitative relationship between ECT(eddy current test) signal and crack size is needed in assesment of integrity of steam generator in pressurized water reactor. However, it is not fully established for application in industry. Retired steam generator of Kori 1 has many kinds of crack such as circumferential and axial primary water stress corrosion crack and outer diameter stress corrosion crack(ODSCC). So, it can be used in qualifying and improving ECT technology and in condition monitoring assesment for crack detected in ISI(in service inspection). In addition, examination of pulled tube of Kori 1 retired steam generator will give information about effectiveness of non welded sleeving technology which was employed to repair defect tubes and remedial action which was applied to mitigate ODSCC. In this project, hardware such as semi hot lab. for pulled tube examination and modification transportation cask for pulled tube and software such as procedure of transportation of radioactive steam generator tube and non-destructive and destructive examination of pulled tube were established. Non-destructive and destructive examination of pulled tubes from Kori 1 retired steam generator were performed in semi hot lab. Remedial actions applied to Kori 1 retired steam generator, PWSCC trend and bulk water chemistry and crevice chemistry in Kori 1 were evaluated. Electrochemical decontamination technology for pulled tube was developed to reduce radiation exposure and enhance effectiveness of pulled tube examination. Multiparameter algorithm developed at ANL, USA was

  15. Noise reduction in steam-vent points at the Cerro Prieto geothermal field, BC; Reduccion del ruido en puntos de desfogue en el campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Miranda Herrera, Carlos A [Comision Federal de Electricidad, Residencia General de Cerro Prieto, Mexicali, B.C (Mexico)]. E-mail: carlos.miranda02@cfe.gob.mx

    2008-01-15

    Steam silencers have been placed on the power units regulation system of the Cerro Prieto geothermal field, but not where the steam-pipes vent high-pressure steam (rupture disks). Moreover, the power-unit silencers are large and their abilities to reduce noise depend on an external, uncontrollable factor: pores sizes in the volcanic rocks they are made of. Thus a compact, economic and relatively easy to construct metallic silencer was designed to be used at several points of dry-steam venting to minimize the noise. The design was based on orifice-plate equations and a prototype was constructed and tested. It proved capable of reducing noise by 30 decibels for atmospheric discharges of primary steam at operating pressures. The size of the silencer can be adjusted to the particular needs of each vent case. [Spanish] En el campo geotermico de Cerro Prieto solo existen silenciadores de vapor en el sistema de regulacion de las plantas generadoras, pero no en los sitios de desfogue de vapor a alta presion en los vaporductos (discos de ruptura). Ademas, los silenciadores de las plantas son muy robustos y su capacidad de reduccion del ruido depende de un factor externo no controlable, como es el tamano del poro de la roca volcanica con el que estan construidos. Por lo tanto, se diseno un silenciador metalico compacto, economico y relativamente facil de fabricar, para utilizarse en diversos puntos de descarga de vapor seco a fin de minimizar el ruido. El diseno se realizo con base en las ecuaciones de la placa de orificio. Se construyo un prototipo cuyas pruebas demostraron que es capaz de reducir el ruido hasta en 30 decibeles, al descargar desde la presion de operacion de vapor primario hacia la presion atmosferica. Las dimensiones del silenciador pueden ajustarse a las necesidades particulares de cada caso de desfogue.

  16. New type steam turbine for cogeneration

    Institute of Scientific and Technical Information of China (English)

    He Jianren; Yang Qiguo; Xu Damao

    2010-01-01

    A concept of energy saving & efficiency improving from cold source for cogeneration steam turbine was discussed herein.A new type"NCB"cogeneration steam turbine was proposed,which could considerably increase heat supply capacity,thermal efficiency and electric power.Taking 300 MW cogeneration steam turbine as an example,the results show that heat supply capacity reaches the maximum,i.e.increases by 30%,thermal efficiency is improved by12%,and electric power is enhanced by 15 MW during peak heat load.

  17. Selective hydrogenation processes in steam cracking

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.; Schroeter, M.K.; Hinrichs, M.; Makarczyk, P. [BASF SE, Ludwigshafen (Germany)

    2010-12-30

    Hydrogen is the key elixir used to trim the quality of olefinic and aromatic product slates from steam crackers. Being co-produced in excess amounts in the thermal cracking process a small part of the hydrogen is consumed in the ''cold part'' of a steam cracker to selectively hydrogenate unwanted, unsaturated hydrocarbons. The compositions of the various steam cracker product streams are adjusted by these processes to the outlet specifications. This presentation gives an overview over state-of-art selective hydrogenation technologies available from BASF for these processes. (Published in summary form only) (orig.)

  18. Acoustic elliptical cylindrical cloaks

    Institute of Scientific and Technical Information of China (English)

    Ma Hua; Qu Shao-Bo; Xu Zhuo; Wang Jia-Fu

    2009-01-01

    By making a comparison between the acoustic equations and the 2-dimensional (2D) Maxwell equations, we obtain the material parameter equations (MPE) for acoustic elliptical cylindrical cloaks. Both the theoretical results and the numerical results indicate that an elliptical cylindrical cloak can realize perfect acoustic invisibility when the spatial distributions of mass density and bulk modulus are exactly configured according to the proposed equations. The present work is the meaningful exploration of designing acoustic cloaks that are neither sphere nor circular cylinder in shape, and opens up possibilities for making complex and multiplex acoustic cloaks with simple models such as spheres, circular or elliptic cylinders.

  19. Indoor acoustic gain design

    Science.gov (United States)

    Concha-Abarca, Justo Andres

    2002-11-01

    The design of sound reinforcement systems includes many variables and usually some of these variables are discussed. There are criteria to optimize the performance of the sound reinforcement systems under indoor conditions. The equivalent acoustic distance, the necessary acoustic gain, and the potential acoustic gain are parameters which must be adjusted with respect to the loudspeaker array, electric power and directionality of loudspeakers, the room acoustics conditions, the distance and distribution of the audience, and the type of the original sources. The design and installation of front of the house and monitoring systems have individual criteria. This article is about this criteria and it proposes general considerations for the indoor acoustic gain design.

  20. 49 CFR 230.21 - Steam locomotive number change.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive number change. 230.21 Section 230... Recordkeeping Requirements § 230.21 Steam locomotive number change. When a steam locomotive number is changed, the steam locomotive owner and/or operator must reflect the change in the upper right-hand corner...

  1. Analysis of Silences in“The Dumb Waiter”

    Institute of Scientific and Technical Information of China (English)

    张晓莉

    2013-01-01

    Harold Pinter is one of the famous absurdist play writer in England. His works and language are full of absurd color, which is the focus of critics. Silence is a trademark of Harold Pinter’s writing. He uses it to an exquisite manner that he forms his individual“Pinteresque”silence. Silences in his play appear many times and act as a natural barrier for true self. This paper will take Pinter’s early work“The Dumb Waiter”for example to analysis the wide usage of silences in the play. The paper tries to un-mask the truth under silences. And by exploring the two types of silences, we can see characters ’true emotion and intention un-derground.

  2. An Improved Steam Injection Model with the Consideration of Steam Override

    Directory of Open Access Journals (Sweden)

    He Congge

    2017-01-01

    Full Text Available The great difference in density between steam and liquid during wet steam injection always results in steam override, that is, steam gathers on the top of the pay zone. In this article, the equation for steam override coefficient was firstly established based on van Lookeren’s steam override theory and then radius of steam zone and hot fluid zone were derived according to a more realistic temperature distribution and an energy balance in the pay zone. On this basis, the equation for the reservoir heat efficiency with the consideration of steam override was developed. Next, predicted results of the new model were compared with these of another analytical model and CMG STARS (a mature commercial reservoir numerical simulator to verify the accuracy of the new mathematical model. Finally, based on the validated model, we analyzed the effects of injection rate, steam quality and reservoir thickness on the reservoir heat efficiency. The results show that the new model can be simplified to the classic model (Marx-Langenheim model under the condition of the steam override being not taken into account, which means the Marx-Langenheim model is corresponding to a special case of this new model. The new model is much closer to the actual situation compared to the Marx-Langenheim model because of considering steam override. Moreover, with the help of the new model, it is found that the reservoir heat efficiency is not much affected by injection rate and steam quality but significantly influenced by reservoir thickness, and to ensure that the reservoir can be heated effectively, the reservoir thickness should not be too small.

  3. Study of Scaling Development on Tube Surfaces of Water Steam Loop in Steam Generator of CEFR

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Lu; LIU; Fu-chen; LUO; De-kang; WU; Qiang; ZHANG; Huan-qi

    2012-01-01

    <正>The steam generator worked as pressure boundary of Na-H2O loop in China Experimental FastReactor (CEFR), which was quite important for nuclear reactor safety. Once the tubes separating the water from steam leak because of corrosion by scaling, Na-H2O reaction would lead to severe accident. So it’s critically important to study how the scaling develops on the water-steam sides.

  4. Speaking of Silence: Comments from an Irish Studies Perspective

    OpenAIRE

    McQuaid, Sara Dybris; Beville, Maria

    2012-01-01

    This paper will discuss how silence continues to prove a forbearing presence in literary, historical, cultural and political discourse in Ireland, North and South. It will suggest that not only does Ireland prove a useful topic for understanding the many implications of silence, it will further argue that silence in its own right is a unique and important route to understanding the complexities of modern Ireland in cultural, contemporary and historical terms. This is true, not least in the ca...

  5. Post-transcriptional gene silencing across kingdoms.

    Science.gov (United States)

    Cogoni, C; Macino, G

    2000-12-01

    Post-transcriptional gene silencing (PTGS) as a consequence of the introduction of either transgenes or double-stranded RNA molecules has been found to occur in a number of species. In the past year, studies in different systems have greatly enhanced our understanding of the molecular mechanisms of these phenomena. The ubiquitous presence of PTGS in both the plant and animal kingdoms and the finding of common genetic mechanisms suggest that PTGS is a universal gene-regulation system fundamental in biological processes such as protection against viruses and transposons.

  6. Thermodynamics of supersaturated steam: Molecular simulation results

    Science.gov (United States)

    Moučka, Filip; Nezbeda, Ivo

    2016-12-01

    Supersaturated steam modeled by the Gaussian charge polarizable model [P. Paricaud, M. Předota, and A. A. Chialvo, J. Chem. Phys. 122, 244511 (2005)] and BK3 model [P. Kiss and A. Baranyai, J. Chem. Phys. 138, 204507 (2013)] has been simulated at conditions occurring in steam turbines using the multiple-particle-move Monte Carlo for both the homogeneous phase and also implemented for the Gibbs ensemble Monte Carlo molecular simulation methods. Because of these thermodynamic conditions, a specific simulation algorithm has been developed to bypass common simulation problems resulting from very low densities of steam and cluster formation therein. In addition to pressure-temperature-density and orthobaric data, the distribution of clusters has also been evaluated. The obtained extensive data of high precision should serve as a basis for development of reliable molecular-based equations for properties of metastable steam.

  7. US PWR steam generator management: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Welty, C.S. Jr. [Electric Power Research Institute, Palo Alto, CA (United States)

    1997-02-01

    This paper provides an overview on the status of steam generator management activities in US PWRs, and includes: (1) an overview of the impact of steam generator problems; (2) a brief discussion of historical damage trends and the current damage mechanism of most concern; (3) a discussion of the elements of {open_quotes}steam generator management{close_quotes}; and (4) a description of the approach being followed to implement a degradation-specific protocol for tubing inspection and repair. This paper was prepared in conjunction with another paper presented during the Plenary Session of this Conference, {open_quotes}Steam Generator Degradation: Current Mitigation Strategies for Controlling Corrosion{close_quotes}, and is provided as a supplement to that material.

  8. Biophysical Evaluation of SonoSteam®:

    DEFF Research Database (Denmark)

    Andersen, Ann Zahle; Duelund, Lars; Brewer, Jonathan R.;

    and safety evaluations. Our results show that there are no contradictions between data obtained by either approach. However, the biophysical methods draw a much more nuanced picture of the effects and efficiency of the investigated decontamination method, revealing e.g. an exponential dose/response...... relationship between SonoSteam treatment time and changes in collagen I, and a depth dependency in bacterial reduction, which points toward CFU counts overestimating total bacterial reduction. In conclusion the biophysical methods provide a less biased, reproducible and highly detailed system description......In this study we employ a biophysical and molecular approach for the investigation of qualitative and quantitative changes in both food surface and bacteria upon surface decontamination by SonoSteam®. SonoSteam® is a recently developed method of food surface decontamination, which employs steam...

  9. Pretreatment of Corn Stalk by Steam Explosion

    Institute of Scientific and Technical Information of China (English)

    邵自强; 田永生; 谭惠民

    2003-01-01

    A steam explosion pretreatment, which is one of the best ways of pretreating plant stalk, is applied at various severities to corn stalk. It could effectively modify the super-molecular structure of corn stalk and defibrating corn stalk into individual components. The relationship between yield of reducing sugar and the operating conditions, including temperature, pressure of steam explosion pretreatment and acidity, is also established. Experimental results prove that the steam explosion substantially increases the yield of reducing sugar, and the optimal condition for steam explosion is as follows: the pressure is 2.0 MPa, the pressure-retaining time 300 s, the initial acid concentration 1% and the acid treatment time 24 h.

  10. A small pelton turbine for steam turbocharger

    Energy Technology Data Exchange (ETDEWEB)

    Rautenberg, M.; Abdelkader, M.; Malobabic, M.; Mobarak, A.

    1984-08-01

    The use of exhaust gas turbocharger for internal combustion engines is usually accompanied by mechanical loss. This loss is due to the raise of exhaust gas back pressure with the increase of engine speed. This back pressure prevents the discharge of the exhaust gas from the engine and causes mechanical loss. To avoid this undesirable phenomenon, a Clausius-Rankine cycle is used. In this case the thermal energy in the exhaust gas is used to vaporise water in a steam generator. The generated steam expands in a steam turbocharger which supercharges the engine. A small Pelton steam turbine has been designed and fabricated. The expected output for this small turbine is 10 kW. A computer program has been prepared to estimate the values of optimum cycle parameters.

  11. A modular plasmid assembly kit for multigene expression, gene silencing and silencing rescue in plants.

    Directory of Open Access Journals (Sweden)

    Andreas Binder

    Full Text Available The Golden Gate (GG modular assembly approach offers a standardized, inexpensive and reliable way to ligate multiple DNA fragments in a pre-defined order in a single-tube reaction. We developed a GG based toolkit for the flexible construction of binary plasmids for transgene expression in plants. Starting from a common set of modules, such as promoters, protein tags and transcribed regions of interest, synthetic genes are assembled, which can be further combined to multigene constructs. As an example, we created T-DNA constructs encoding multiple fluorescent proteins targeted to distinct cellular compartments (nucleus, cytosol, plastids and demonstrated simultaneous expression of all genes in Nicotiana benthamiana, Lotus japonicus and Arabidopsis thaliana. We assembled an RNA interference (RNAi module for the construction of intron-spliced hairpin RNA constructs and demonstrated silencing of GFP in N. benthamiana. By combination of the silencing construct together with a codon adapted rescue construct into one vector, our system facilitates genetic complementation and thus confirmation of the causative gene responsible for a given RNAi phenotype. As proof of principle, we silenced a destabilized GFP gene (dGFP and restored GFP fluorescence by expression of a recoded version of dGFP, which was not targeted by the silencing construct.

  12. Cogeneration steam turbines from Siemens: New solutions

    Science.gov (United States)

    Kasilov, V. F.; Kholodkov, S. V.

    2017-03-01

    The Enhanced Platform system intended for the design and manufacture of Siemens AG turbines is presented. It combines organizational and production measures allowing the production of various types of steam-turbine units with a power of up to 250 MWel from standard components. The Enhanced Platform designs feature higher efficiency, improved reliability, better flexibility, longer overhaul intervals, and lower production costs. The design features of SST-700 and SST-900 steam turbines are outlined. The SST-700 turbine is used in backpressure steam-turbine units (STU) or as a high-pressure cylinder in a two-cylinder condensing turbine with steam reheat. The design of an SST-700 single-cylinder turbine with a casing without horizontal split featuring better flexibility of the turbine unit is presented. An SST-900 turbine can be used as a combined IP and LP cylinder (IPLPC) in steam-turbine or combined-cycle power units with steam reheat. The arrangements of a turbine unit based on a combination of SST-700 and SST-900 turbines or SST-500 and SST-800 turbines are presented. Examples of this combination include, respectively, PGU-410 combinedcycle units (CCU) with a condensing turbine and PGU-420 CCUs with a cogeneration turbine. The main equipment items of a PGU-410 CCU comprise an SGT5-4000F gas-turbine unit (GTU) and STU consisting of SST-700 and SST-900RH steam turbines. The steam-turbine section of a PGU-420 cogeneration power unit has a single-shaft turbine unit with two SST-800 turbines and one SST-500 turbine giving a power output of N el. STU = 150 MW under condensing conditions.

  13. Future trends in steam coal utilisation

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, G.A.

    1999-07-01

    The history of coal production in important regions of the world and the evolution of the international steam coal trade is reviewed. Then the four main drivers for the evolution of steam coal utilisation and how they may impact different regions of the world are discussed. These drivers are: social issues, including population, wealth and employment; strategic issues like energy security and balance of payments; competitiveness; and environment.

  14. Reciprocating wear in a steam environment

    Energy Technology Data Exchange (ETDEWEB)

    Brown, L.J.; Gee, M.G. [National Physical Laboratory, Teddington, Middlesex (United Kingdom)

    2010-07-01

    Tests to simulate the wear between sliding components in steam power plant have been performed using a low frequency wear apparatus at elevated temperatures under static load, at ambient pressure, in a steam environment. The apparatus was modified to accept a novel method of steam delivery. The materials tested were pre-exposed in a flowing steam furnace at temperature for either 500 or 3000 hours to provide some simulation of long term ageing. The duration of each wear test was 50 hours and tests were also performed on as-received material for comparison purposes. Data has been compared with results of tests performed on non-oxidised material for longer durations and also on tests without steam to examine the effect of different environments. Data collected from each test consists of mass change, stub height measurement and friction coefficient as well as visual inspection of the wear track. Within this paper, it is reported that both pre-ageing and the addition of steam during testing clearly influence the friction between material surfaces. (orig.)

  15. Silencing of cryptic prophages in Corynebacterium glutamicum.

    Science.gov (United States)

    Pfeifer, Eugen; Hünnefeld, Max; Popa, Ovidiu; Polen, Tino; Kohlheyer, Dietrich; Baumgart, Meike; Frunzke, Julia

    2016-12-01

    DNA of viral origin represents a ubiquitous element of bacterial genomes. Its integration into host regulatory circuits is a pivotal driver of microbial evolution but requires the stringent regulation of phage gene activity. In this study, we describe the nucleoid-associated protein CgpS, which represents an essential protein functioning as a xenogeneic silencer in the Gram-positive Corynebacterium glutamicum CgpS is encoded by the cryptic prophage CGP3 of the C. glutamicum strain ATCC 13032 and was first identified by DNA affinity chromatography using an early phage promoter of CGP3. Genome-wide profiling of CgpS binding using chromatin affinity purification and sequencing (ChAP-Seq) revealed its association with AT-rich DNA elements, including the entire CGP3 prophage region (187 kbp), as well as several other elements acquired by horizontal gene transfer. Countersilencing of CgpS resulted in a significantly increased induction frequency of the CGP3 prophage. In contrast, a strain lacking the CGP3 prophage was not affected and displayed stable growth. In a bioinformatics approach, cgpS orthologs were identified primarily in actinobacterial genomes as well as several phage and prophage genomes. Sequence analysis of 618 orthologous proteins revealed a strong conservation of the secondary structure, supporting an ancient function of these xenogeneic silencers in phage-host interaction.

  16. Reliability of steam generator tubing

    Energy Technology Data Exchange (ETDEWEB)

    Kadokami, E. [Mitsubishi Heavy Industries Ltd., Hyogo-ku (Japan)

    1997-02-01

    The author presents results on studies made of the reliability of steam generator (SG) tubing. The basis for this work is that in Japan the issue of defects in SG tubing is addressed by the approach that any detected defect should be repaired, either by plugging the tube or sleeving it. However, this leaves open the issue that there is a detection limit in practice, and what is the effect of nondetectable cracks on the performance of tubing. These studies were commissioned to look at the safety issues involved in degraded SG tubing. The program has looked at a number of different issues. First was an assessment of the penetration and opening behavior of tube flaws due to internal pressure in the tubing. They have studied: penetration behavior of the tube flaws; primary water leakage from through-wall flaws; opening behavior of through-wall flaws. In addition they have looked at the question of the reliability of tubing with flaws during normal plant operation. Also there have been studies done on the consequences of tube rupture accidents on the integrity of neighboring tubes.

  17. Organizational Silence in Universities as the Predictor of Organizational Culture

    Directory of Open Access Journals (Sweden)

    Erkan YAMAN

    2014-04-01

    Full Text Available The aim of this study is to determine the relationship between the sense of organizational silence and the organizational culture the instructors perceived. In this study, the scale for determining organizational culture developed by İpek (1999 and the scale for measuring organizational silence developed by Çakıcı (2007 and adapted by Soycan (2010 are used. No remarkable difference was found in the academic staff's sense of organizational silence degree according to their genders and educational backgrounds. It was seen that the instructors' sense of organizational silence had remarkable differences according to their age group, faculty, sense of administration type in their institutions, frequency of their face-to-face communication with their administrators and their thoughts of speaking clearly with their administrators. It was observed that research assistants had a significantly higher sense of organizational silence than the lecturers in the sense of ‘Lack of Experience'. It was seen that academicians who had 1-5 years of employment period had the highest sense of organizational silence while those who had 21 years or more employment period had the lowest sense of organizational silence in the sense of ‘Lack of Experience' of organizational silence. When the points that participant academicians got from organizational silence and organizational culture scales analyzed in the correlation table, it was found out that there was a remarkable relationship between the academicians' sense of organizational silence and sense of organizational culture. This relationship was a medium-level negative relationship between subdimensions of two scales. A medium-level negative relationship between the organizational silence (total and the organizational culture was also seen. Based on the findings, university administrators were proposed to create a participant culture in their institutions as well as to encourage instructors to speak clearly and

  18. Vibro-acoustics

    CERN Document Server

    Nilsson, Anders

    2015-01-01

    This three-volume book gives a thorough and comprehensive presentation of vibration and acoustic theories. Different from traditional textbooks which typically deal with some aspects of either acoustic or vibration problems, it is unique of this book to combine those two correlated subjects together. Moreover, it provides fundamental analysis and mathematical descriptions for several crucial phenomena of Vibro-Acoustics which are quite useful in noise reduction, including how structures are excited, energy flows from an excitation point to a sound radiating surface, and finally how a structure radiates noise to a surrounding fluid. Many measurement results included in the text make the reading interesting and informative. Problems/questions are listed at the end of each chapter and the solutions are provided. This will help the readers to understand the topics of Vibro-Acoustics more deeply. The book should be of interest to anyone interested in sound and vibration, vehicle acoustics, ship acoustics and inter...

  19. Springer handbook of acoustics

    CERN Document Server

    2014-01-01

    Acoustics, the science of sound, has developed into a broad interdisciplinary field encompassing the academic disciplines of physics, engineering, psychology, speech, audiology, music, architecture, physiology, neuroscience, and electronics. The Springer Handbook of Acoustics is also in his 2nd edition an unparalleled modern handbook reflecting this richly interdisciplinary nature edited by one of the acknowledged masters in the field, Thomas Rossing. Researchers and students benefit from the comprehensive contents. This new edition of the Handbook features over 11 revised and expanded chapters, new illustrations, and 2 new chapters covering microphone arrays  and acoustic emission.  Updated chapters contain the latest research and applications in, e.g. sound propagation in the atmosphere, nonlinear acoustics in fluids, building and concert hall acoustics, signal processing, psychoacoustics, computer music, animal bioacousics, sound intensity, modal acoustics as well as new chapters on microphone arrays an...

  20. Deep Water Ocean Acoustics

    Science.gov (United States)

    2016-04-30

    OASIS, INC. 1 Report No. QSR-14C0172-Ocean Acoustics-043016 Quarterly Progress Report Technical and Financial Deep Water Ocean Acoustics...understanding of the impact of the ocean and seafloor environmental variability on deep- water (long-range) ocean acoustic propagation and to...improve our understanding. During the past few years, the physics effects studied have been three-dimensional propagation on global scales, deep water

  1. Nearfield Acoustical Holography

    Science.gov (United States)

    Hayek, Sabih I.

    Nearfield acoustical holography (NAH) is a method by which a set of acoustic pressure measurements at points located on a specific surface (called a hologram) can be used to image sources on vibrating surfaces on the acoustic field in three-dimensional space. NAH data are processed to take advantage of the evanescent wavefield to image sources that are separated less that one-eighth of a wavelength.

  2. No-Big-Silence teeb klubituuri / Urmas Hännile

    Index Scriptorium Estoniae

    Hännile, Urmas

    2009-01-01

    Rockansamblist No-Big-Silence ja dark-popansamblist Sinine, nende kontsertttuurist mööda Eestimaad, tutvustamisel bändide uued albumid (No-Big-Silence "Starstealer" ja Sinine "Butterflies"), Pärnus on kontsert 24. oktoobril klubis Sugar

  3. The Functions of Silence within the Context of Teacher Training.

    Science.gov (United States)

    Phillips, Diane

    1994-01-01

    This article examines the function of silence in both preservice and in-service teacher education classroom observations, workshops, and feedback sessions. Teacher educators and teacher trainees need to be aware of the effects of silence in oral and written discourse. (19 references) (MDM)

  4. Antiviral RNA silencing viral counter defense in plants

    NARCIS (Netherlands)

    Bucher, E.C.

    2006-01-01

    The research described in this thesis centres around the mechanism of RNA silencing in relation to virus-host interaction, an area of increasing importance. It shows how this recently disclosed mechanism can be used to produce virus-resistant plants. Based on the activity of the RNA silencing machin

  5. Hearing the Silence: Acknowledging the Voice of My Latina Sisters

    Science.gov (United States)

    Martinez-Vogt, Emily

    2015-01-01

    Latina community college students experience a number of challenges during their transition to college. Findings from a larger study indicated that Latina community college students experienced racism and stereotyping on campus responding with silence. Silence occurred in two ways: (1) Latinas were forced to be silent, and/or (2) Latinas chose to…

  6. Strategies underlying RNA silencing suppression by negative strand RNA viruses

    NARCIS (Netherlands)

    Hemmes, J.C.

    2007-01-01

    The research described in this thesis focused on the strategies of negative strand RNA viruses to counteract antiviral RNA silencing. In plants and insects, RNA silencing has been shown to act as a sequence specific antiviral defence mechanism that is characterised by the processing of double strand

  7. Multiple Interpretations of EFL Learners’ Silence in the Iranian Context

    Directory of Open Access Journals (Sweden)

    Reza Ghaffar Samar

    2013-11-01

    Full Text Available Attention to silence as part of the communicative discourse was first drawn in Sack’s (1974 paper, in which it was perceived as a linguistic and communicative form, and from the functional point of view as capable of expressing ideational, interpersonal, and textual functions. Awareness of multiple functions of silence including the referential, emotive, conative, phatic, poetic and metalanguage is of greater significance when it comes to language learning settings, where learners from a different cultural background from the target language are present to learn that language.  In such contexts, awareness of various functions of silence and correct interpretation of it is essential in teacher-student rapport. This paper aims to, first, provide an introduction to the multiple functions of silence in general and then to investigate these functions in EFL classes of Iran’s private language institutes. The researchers’ own teaching experience along with class observations and 2 phases of interview with teachers of those classes comprise the research data. Findings were indicative of teachers’ lack of awareness of diverse communicative functions of silence in class and that this awareness could be raised through the informal interview phases. This paper attests to the fact that not all learner’s silence should be interpreted negatively as lack of attention or knowledge. Teachers need to be aware of the salient meanings of silence in their EFL class and take an appropriate reactive step accordingly. Keywords: silence, Jakobson’s communicative model, culture, EFL, Iran

  8. An Analysis of Heathcliff’s Silence in Wuthering Heights

    Institute of Scientific and Technical Information of China (English)

    潘琛

    2013-01-01

    Heathcliff is a highly controversial character in Emily Brontë’s canon Wuthering Heights. He is depicted as an incredi-ble conglomeration of enigmas and simplicity, aloofness and affinity, ferocity and vulnerability, inhumanity and heroicity, a man who appears more silent and preoccupied than talkative and carefree, inaudible and incalculable in both words and thoughts. The author of this paper considers that there is much left to be read and contemplate on in Heathcliff ’s silence and thus make a tempa-tive research into Heathcliff’s silence by discerning its manifestations and probing its causes, in order to resonate with the inner touch of this complicated soul and relate his silence with the spirit that Emily Brontë wished to deliver through Wuthering Heights. Heathcliff’s silence manifests as muteness, elusion and colloquial or physical violence. In his whole life, Heathcliff inter-mittently experiences the self-chosen silence and the forced silence. He chooses to be silence out of self-protection and the infe-riority complex;he considers silence as a token of masculinity. And the ruthless force from outside also compels him into a periph-eralized situation where he has to keep silent and struggles against the torture and torment alone.

  9. Reflections on the Silencing the Self Scale and Its Origins

    Science.gov (United States)

    Jack, Dana Crowley

    2011-01-01

    In this article, the author reflects on the Silencing the Self Scale (STSS) and blends her personal and professional thoughts about self-silencing, gender, and depression. For her, the despair of depression deeply involves questions of value and meaning, culture and freedom. The STSS grew from listening to depressed women's voices. From them, the…

  10. Speaking of Silence: Comments from an Irish Studies Perspective

    DEFF Research Database (Denmark)

    McQuaid, Sara Dybris; Beville, Maria

    2012-01-01

    This paper will discuss how silence continues to prove a forbearing presence in literary, historical, cultural and political discourse in Ireland, North and South. It will suggest that not only does Ireland prove a useful topic for understanding the many implications of silence, it will further a...

  11. Silence in the Second Language Classrooms of Japanese Universities

    Science.gov (United States)

    King, Jim

    2013-01-01

    Japanese language learners' proclivity for silence has been alluded to by various writers (e.g. Anderson 1993; Korst 1997; Greer 2000) and is supported by plenty of anecdotal evidence, but large-scale, empirical studies aimed at measuring the extent of macro-level silence within Japanese university L2 classrooms are notably lacking. This article…

  12. Silence: A Rhetorical Art for Resisting Discipline(s).

    Science.gov (United States)

    Glenn, Cheryl

    2002-01-01

    Argues that silence can be a specifically feminist rhetorical art, often one of resistance. Draws on two key rhetorical movements: the Anita Hill-Clarence Thomas hearings and the never-heard hearing of Lani Guinier. Explores the rhetorical dimensions of silence as a feminist position that can resist disciplinary pigeon-holing, embrace political…

  13. Laboratory for Structural Acoustics

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports experimental research where acoustic radiation, scattering, and surface vibration measurements of fluid-loaded and non-fluid-loaded structures are...

  14. Handbook of Engineering Acoustics

    CERN Document Server

    Möser, Michael

    2013-01-01

    This book examines the physical background of engineering acoustics, focusing on empirically obtained engineering experience as well as on measurement techniques and engineering methods for prognostics. Its goal is not only to describe the state of art of engineering acoustics but also to give practical help to engineers in order to solve acoustic problems. It deals with the origin, the transmission and the methods of the abating different kinds of air-borne and structure-borne sounds caused by various mechanisms – from traffic to machinery and flow-induced sound. In addition the modern aspects of room and building acoustics, as well as psychoacoustics and active noise control, are covered.

  15. Acoustic Technology Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory contains an electro-magnetic worldwide data collection and field measurement capability in the area of acoustic technology. Outfitted by NASA Langley...

  16. Localized acoustic surface modes

    Science.gov (United States)

    Farhat, Mohamed; Chen, Pai-Yen; Bağcı, Hakan

    2016-04-01

    We introduce the concept of localized acoustic surface modes. We demonstrate that they are induced on a two-dimensional cylindrical rigid surface with subwavelength corrugations under excitation by an incident acoustic plane wave. Our results show that the corrugated rigid surface is acoustically equivalent to a cylindrical scatterer with uniform mass density that can be represented using a Drude-like model. This, indeed, suggests that plasmonic-like acoustic materials can be engineered with potential applications in various areas including sensing, imaging, and cloaking.

  17. Shallow Water Acoustic Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Supports experimental research where high-frequency acoustic scattering and surface vibration measurements of fluid-loaded and non-fluid-loaded structures...

  18. Localized Acoustic Surface Modes

    KAUST Repository

    Farhat, Mohamed

    2015-08-04

    We introduce the concept of localized acoustic surface modes (ASMs). We demonstrate that they are induced on a two-dimensional cylindrical rigid surface with subwavelength corrugations under excitation by an incident acoustic plane wave. Our results show that the corrugated rigid surface is acoustically equivalent to a cylindrical scatterer with uniform mass density that can be represented using a Drude-like model. This, indeed, suggests that plasmonic-like acoustic materials can be engineered with potential applications in various areas including sensing, imaging, and cloaking.

  19. Acoustic Signals and Systems

    DEFF Research Database (Denmark)

    2008-01-01

    The Handbook of Signal Processing in Acoustics will compile the techniques and applications of signal processing as they are used in the many varied areas of Acoustics. The Handbook will emphasize the interdisciplinary nature of signal processing in acoustics. Each Section of the Handbook...... will present topics on signal processing which are important in a specific area of acoustics. These will be of interest to specialists in these areas because they will be presented from their technical perspective, rather than a generic engineering approach to signal processing. Non-specialists, or specialists...

  20. Computer modeling of a convective steam superheater

    Directory of Open Access Journals (Sweden)

    Trojan Marcin

    2015-03-01

    Full Text Available Superheater is for generating superheated steam from the saturated steam from the evaporator outlet. In the case of pulverized coal fired boiler, a relatively small amount of ash causes problems with ash fouling on the heating surfaces, including the superheaters. In the convection pass of the boiler, the flue gas temperature is lower and ash deposits can be loose or sintered. Ash fouling not only reduces heat transfer from the flue gas to the steam, but also is the cause of a higher pressure drop on the flue gas flow path. In the case the pressure drop is greater than the power consumed by the fan increases. If the superheater surfaces are covered with ash than the steam temperature at the outlet of the superheater stages falls, and the flow rates of the water injected into attemperator should be reduced. There is also an increase in flue gas temperature after the different stages of the superheater. Consequently, this leads to a reduction in boiler efficiency. The paper presents the results of computational fluid dynamics simulations of the first stage superheater of both the boiler OP-210M using the commercial software. The temperature distributions of the steam and flue gas along the way they flow together with temperature of the tube walls and temperature of the ash deposits will be determined. The calculated steam temperature is compared with measurement results. Knowledge of these temperatures is of great practical importance because it allows to choose the grade of steel for a given superheater stage. Using the developed model of the superheater to determine its degree of ash fouling in the on-line mode one can control the activation frequency of steam sootblowers.

  1. Computer modeling of a convective steam superheater

    Science.gov (United States)

    Trojan, Marcin

    2015-03-01

    Superheater is for generating superheated steam from the saturated steam from the evaporator outlet. In the case of pulverized coal fired boiler, a relatively small amount of ash causes problems with ash fouling on the heating surfaces, including the superheaters. In the convection pass of the boiler, the flue gas temperature is lower and ash deposits can be loose or sintered. Ash fouling not only reduces heat transfer from the flue gas to the steam, but also is the cause of a higher pressure drop on the flue gas flow path. In the case the pressure drop is greater than the power consumed by the fan increases. If the superheater surfaces are covered with ash than the steam temperature at the outlet of the superheater stages falls, and the flow rates of the water injected into attemperator should be reduced. There is also an increase in flue gas temperature after the different stages of the superheater. Consequently, this leads to a reduction in boiler efficiency. The paper presents the results of computational fluid dynamics simulations of the first stage superheater of both the boiler OP-210M using the commercial software. The temperature distributions of the steam and flue gas along the way they flow together with temperature of the tube walls and temperature of the ash deposits will be determined. The calculated steam temperature is compared with measurement results. Knowledge of these temperatures is of great practical importance because it allows to choose the grade of steel for a given superheater stage. Using the developed model of the superheater to determine its degree of ash fouling in the on-line mode one can control the activation frequency of steam sootblowers.

  2. Experimental investigation of the steam wetness in a 1000 MW steam turbine

    Science.gov (United States)

    Kolovratník, Michal; Bartoš, Ondřej

    2016-03-01

    The aim of this paper is to introduce the experimental data of the wetness distribution obtained in the year 2015 in front of and behind the last stage of the 1000MW steam turbine in the power plant Temelín. Two different optical probes developed at Czech Technical University were used. For the first time in the Czech Republic pneumatic and optical measurement of the wet steam flow field in front of the last stage of a nuclear power-station steam turbine was provided. This unique measurement opportunity provided lots of new information for the manufacturer and operator of the steam turbine and valuable experimental data for the phase transition modelling in the wet steam flow. The experimental measurement was done in cooperation with Doosan Škoda Power s.r.o.

  3. Experimental investigation of the steam wetness in a 1000 MW steam turbine

    Directory of Open Access Journals (Sweden)

    Kolovratník Michal

    2016-01-01

    Full Text Available The aim of this paper is to introduce the experimental data of the wetness distribution obtained in the year 2015 in front of and behind the last stage of the 1000MW steam turbine in the power plant Temelín. Two different optical probes developed at Czech Technical University were used. For the first time in the Czech Republic pneumatic and optical measurement of the wet steam flow field in front of the last stage of a nuclear power-station steam turbine was provided. This unique measurement opportunity provided lots of new information for the manufacturer and operator of the steam turbine and valuable experimental data for the phase transition modelling in the wet steam flow. The experimental measurement was done in cooperation with Doosan Škoda Power s.r.o.

  4. Surface acoustic wave sensing of VOCs in harsh chemical environments

    Energy Technology Data Exchange (ETDEWEB)

    Pfeifer, K.B.; Martin, S.J.; Ricco, A.J.

    1993-06-01

    The measurement of VOC concentrations in harsh chemical and physical environments is a formidable task. A surface acoustic wave (SAW) sensor has been designed for this purpose and its construction and testing are described in this paper. Included is a detailed description of the design elements specific to operation in 300{degree}C steam and HCl environments including temperature control, gas handling, and signal processing component descriptions. In addition, laboratory temperature stability was studied and a minimum detection limit was defined for operation in industrial environments. Finally, a description of field tests performed on steam reforming equipment at Synthetica Technologies Inc. of Richmond, CA is given including a report on destruction efficiency of CCl{sub 4} in the Synthetica moving bed evaporator. Design improvements based on the field tests are proposed.

  5. Chinanteco children’s silences in different classroom situations

    Directory of Open Access Journals (Sweden)

    Valeria Rebolledo Angulo

    2016-01-01

    Full Text Available This article analyzes, from an ethnographic perspective and a sociocultural framework, the construction of silences in the interaction between students and teachers in a multilingual classroom situation in an indigenous community in méxico. the analysis reveals how the silence of the chinanteco speaking children when asked to answer certain questions in class is not always due to their failure to understand spoken and written spanish that is used in class. their silences are responses taking different meanings in specific situations. the silence of the children can be a way of resisting, a way of hiding, and, sometimes, their voices are silenced.

  6. Screening and identification of virus-encoded RNA silencing suppressors.

    Science.gov (United States)

    Karjee, Sumona; Islam, Mohammad Nurul; Mukherjee, Sunil K

    2008-01-01

    RNA silencing, including RNA interference, is a novel method of gene regulation and one of the potent host-defense mechanisms against the viruses. In the course of evolution, the viruses have encoded proteins with the potential to suppress the host RNA silencing mechanism as a counterdefense strategy. The virus-encoded RNA silencing suppressors (RSSs) can serve as important biological tools to dissect the detailed RNA silencing pathways and also to evolve the antiviral strategies. Screening and identification of the RSSs are indeed of utmost significance in the field of plant biotechnology. We describe two Green Fluorescent Protein (GFP) reporter-based plant assay systems that rely on two different principles, namely reversal of silencing and enhancement of rolling circle replication (RCR) of geminiviral replicon. These proof-of-concept examples and assay systems could be used to screen various plant, animal, and insect viral ORFs for identification of the RSS activities.

  7. Functioning efficiency of intermediate coolers of multistage steam-jet ejectors of steam turbines

    Science.gov (United States)

    Aronson, K. E.; Ryabchikov, A. Yu.; Brodov, Yu. M.; Zhelonkin, N. V.; Murmanskii, I. B.

    2017-03-01

    Designs of various types of intermediate coolers of multistage ejectors are analyzed and thermal effectiveness and gas-dynamic resistance of coolers are estimated. Data on quantity of steam condensed from steam-air mixture in stage I of an ejector cooler was obtained on the basis of experimental results. It is established that the amount of steam condensed in the cooler constitutes 0.6-0.7 and is almost independent of operating steam pressure (and, consequently, of steam flow) and air amount in steam-air mixture. It is suggested to estimate the amount of condensed steam in a cooler of stage I based on comparison of computed and experimental characteristics of stage II. Computation taking this hypothesis for main types of mass produced multistage ejectors into account shows that 0.60-0.85 of steam amount should be condensed in stage I of the cooler. For ejectors with "pipe-in-pipe" type coolers (EPO-3-200) and helical coolers (EO-30), amount of condensed steam may reach 0.93-0.98. Estimation of gas-dynamic resistance of coolers shows that resistance from steam side in coolers with built-in and remote pipe bundle constitutes 100-300 Pa. Gas-dynamic resistance of "pipein- pipe" and helical type coolers is significantly higher (3-6 times) compared with pipe bundle. However, performance by "dry" (atmospheric) air is higher for ejectors with relatively high gas-dynamic resistance of coolers than those with low resistance at approximately equal operating flow values of ejectors.

  8. Solar steam supply: Initial operation of a plant

    OpenAIRE

    Krüger, Dirk; Lichtenthäler, Niels; Dersch, Jürgen; Schenk, Heiko; Hennecke, Klaus; Anthrakidis, Anette; Rusack, Markus; Lokurlu, Ahmet; Saidi, Karim; Walder, Marcus; Fischer, Stephan; Wirth, Hans Peter

    2011-01-01

    This paper describes experiences in operating a parabolic trough collector field for process heat supply by direct steam generation. The solar steam generator has been running automatically since its start in 2010 except for a winter pause up to now, August 2011, without any malfunction. It has supplied steam at 4 bar absolute and 143°C to the main production steam line on sunny days. Direct steam generation has proven to be a viable technology to supply saturated steam to an industrial st...

  9. GENE SILENCING. Epigenetic silencing by the HUSH complex mediates position-effect variegation in human cells.

    Science.gov (United States)

    Tchasovnikarova, Iva A; Timms, Richard T; Matheson, Nicholas J; Wals, Kim; Antrobus, Robin; Göttgens, Berthold; Dougan, Gordon; Dawson, Mark A; Lehner, Paul J

    2015-06-26

    Forward genetic screens in Drosophila melanogaster for modifiers of position-effect variegation have revealed the basis of much of our understanding of heterochromatin. We took an analogous approach to identify genes required for epigenetic repression in human cells. A nonlethal forward genetic screen in near-haploid KBM7 cells identified the HUSH (human silencing hub) complex, comprising three poorly characterized proteins, TASOR, MPP8, and periphilin; this complex is absent from Drosophila but is conserved from fish to humans. Loss of HUSH components resulted in decreased H3K9me3 both at endogenous genomic loci and at retroviruses integrated into heterochromatin. Our results suggest that the HUSH complex is recruited to genomic loci rich in H3K9me3, where subsequent recruitment of the methyltransferase SETDB1 is required for further H3K9me3 deposition to maintain transcriptional silencing.

  10. Viral counterdefense on RNA silencing : analysis of RNA silencing suppressors from arthropod-borne negative strand RNA plant viruses

    NARCIS (Netherlands)

    Schnettler, E.

    2010-01-01

    This thesis describes that RNA silencing suppressor (RSS) proteins encoded by negative-stranded RNA plant viruses are able to interfere with different RNA silencing pathways in a variety of organisms by interacting with double stranded (ds)RNA molecules. These RSS proteins are able to counteract the

  11. Acoustic fluidization for earthquakes?

    OpenAIRE

    Sornette, D.; Sornette, A.

    2000-01-01

    Melosh [1996] has suggested that acoustic fluidization could provide an alternative to theories that are invoked as explanations for why some crustal faults appear to be weak. We show that there is a subtle but profound inconsistency in the theory that unfortunately invalidates the results. We propose possible remedies but must acknowledge that the relevance of acoustic fluidization remains an open question.

  12. How to compute the power of a steam turbine with condensation, knowing the steam quality of saturated steam in the turbine discharge

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Albarran, Manuel Jaime; Krever, Marcos Paulo Souza [Braskem, Sao Paulo, SP (Brazil)

    2009-07-01

    To compute the power and the thermodynamic performance in a steam turbine with condensation, it is necessary to know the quality of the steam in the turbine discharge and, information of process variables that permit to identifying with high precision the enthalpy of saturated steam. This paper proposes to install an operational device that will expand the steam from high pressure point on the shell turbine to atmosphere, both points with measures of pressure and temperature. Arranging these values on the Mollier chart, it can be know the steam quality value and with this data one can compute the enthalpy value of saturated steam. With the support of this small instrument and using the ASME correlations to determine the equilibrium temperature and knowing the discharge pressure in the inlet of surface condenser, the absolute enthalpy of the steam discharge can be computed with high precision and used to determine the power and thermodynamic efficiency of the turbine. (author)

  13. A study of resonant-cavity and fiberglass-filled parallel baffles as duct silencers. [for wind tunnels

    Science.gov (United States)

    Soderman, P. T.

    1982-01-01

    Acoustical performance and pressure drop were measured for two types of splitters designed to attenuate sound propagating in ducts - resonant-cavity baffles and fiberglass-filled baffles. Arrays of four baffles were evaluated in the 7- by 10-foot wind tunnel number 1 at Ames Research Center at flow speeds from 0 to 41 m/sec. The baffles were 2.1 m high, 305 to 406 mm thick, and 3.1 to 4.4 m long. Emphasis was on measurements of silencer insertion loss as affected by variations of such parameters as baffle length, baffle thickness, perforated skin geometry, cavity size and shape, cavity damping, wind speed, and acoustic field directivity. An analytical method for predicting silencer performance is described and compared with measurements. With the addition of cavity damping in the form of 25-mm foam linings, the insertion loss above 250 Hz of the resonant-cavity baffles was improved 2 to 7 db compared with the undamped baffles; the loss became equal to or greater than the insertion loss of comparable size fiberglass baffles at frequencies above 250 Hz. Variations of cavity size and shape showed that a series of cavities with triangular cross-sections (i.e., variable depth) were superior to cavities with rectangular cross sections (i.e., constant depth). In wind, the undamped, resonant-cavity baffles generated loud cavity-resonance tones; the tones could be eliminated by cavity damping.

  14. Heat Recovery Steam Generator by Using Cogeneration

    Directory of Open Access Journals (Sweden)

    P.Vivek, P. Vijaya kumar

    2014-01-01

    Full Text Available A heat recovery steam generator or HRSG is an energy recovery heat exchanger that recovers heat from a hot gas stream. It produces steam that can be used in a process (cogeneration or used to drive a steam turbine (combined cycle. It has been working with open and closed cycle. Both of cycles are used to increase the performance and also power on the cogeneration plant. If we are using closed cycle technology, we can recycle the waste heat from the turbine. in cogeneration plant, mostly they are using open cycle technology. additional, by using closed cycle technology, we can use the waste heat that converts into useful amount of work. In this paper, the exhaust gas will be sent by using proper outlet from cogen unit, we are using only waste heat that produce from turbine.

  15. Steam injection in Colombia under challenging environment

    Energy Technology Data Exchange (ETDEWEB)

    Waghray, J.P. [Mansovar Energy Colombia Ltd (Colombia)

    2011-07-01

    Mansarovar Energy Columbia Ltd. is a company extracting heavy oil from its Colombian fields. In order to enhance the production and at the same time to contribute to the economic recovery, they are using the cyclic steam injection method. The aim of this presentation is to show what are the challenges facing heavy oil extraction in Colombia, what is the state of the art, and what needs to be improved. Heavy oil extraction in Colombia presents two sorts of challenges: operational ones related to sanding problems and diluents and gas availability; and commercial ones, related to low return rates. The use of steam injection in conventional wells can, however, increase both productivity and the rate of return while at the same time enhancing the recovery factor by 10 to 15%. For the future, improvement in drilling and completion, production, and steam efficiency will be necessary as well as the implementation of the appropriate enhanced oil recovery processes.

  16. New ferritic steels for advanced steam plants

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, K.H; Koenig, H. [GEC ALSTHOM Energie GmbH, Nuremberg (Germany)

    1998-12-31

    During the last 15-20 years ferritic-martensitic 9-12 % chromium steels have been developed under international research programmes which permit inlet steam temperatures up to approx. 625 deg C and pressures up to about 300 bars, thus leading to improvements in thermal efficiency of around 8 % and a CO{sub 2} reduction of about 20 % versus conventional steam parameters. These new steels are already being applied in 13 European and 34 Japanese power stations with inlet steam temperature up to 610 deg C. This presentation will give an account of the content, scope and results of the research programmes and of the experience gained during the production of components which have been manufactured from the new steels. (orig.) 13 refs.

  17. Integrated vacuum absorption steam cycle gas separation

    Science.gov (United States)

    Chen, Shiaguo; Lu, Yonggi; Rostam-Abadi, Massoud

    2011-11-22

    Methods and systems for separating a targeted gas from a gas stream emitted from a power plant. The gas stream is brought into contact with an absorption solution to preferentially absorb the targeted gas to be separated from the gas stream so that an absorbed gas is present within the absorption solution. This provides a gas-rich solution, which is introduced into a stripper. Low pressure exhaust steam from a low pressure steam turbine of the power plant is injected into the stripper with the gas-rich solution. The absorbed gas from the gas-rich solution is stripped in the stripper using the injected low pressure steam to provide a gas stream containing the targeted gas. The stripper is at or near vacuum. Water vapor in a gas stream from the stripper is condensed in a condenser operating at a pressure lower than the stripper to concentrate the targeted gas. Condensed water is separated from the concentrated targeted gas.

  18. Market structure scenarios in international steam coal

    Energy Technology Data Exchange (ETDEWEB)

    Trueby, Johannes; Paulus, Moritz

    2011-04-15

    The seaborne steam coal market changed in recent years. Trade volumes grew dynamically, important players emerged and since 2007 prices increased significantly and remained relatively high since then. In this paper we analyse market equilibria in the years 2006 and 2008 by testing for two possible market structure scenarios in this market: perfect competition and an oligopoly setup with major exporters competing in quantities. We conclude from our results that international steam coal trade is not perfectly competitive as there is a large spread between marginal costs and prices and a low capacity utilisation in 2008. Further, trade flows are generally more diversified in reality than in the competitive scenario. However, also the Cournot scenarios fail to accurately explain real market outcomes. We conclude that only more sophisticated models of strategic behaviour can predict market equilibria in international steam coal trade. (orig.)

  19. Combined gas/steam turbine power plants with coal fired steam generator

    Energy Technology Data Exchange (ETDEWEB)

    Krueger, H.J.; Weirich, P.H. [ABB Kraftwerke AG, Mannheim (Germany)

    1994-12-31

    The combination of coal fired steam power plants with natural gas fired gas turbines results in an essential efficiency increase, up to 50%, requiring a portion of around one third of the fuel heat input in form of natural gas. There are two basic types of circuit arrangements in this category: in a topping process the gas turbine is connected to the steam generator on the gas side, and in a compound cycle power plant gas turbine and steam circuit are connected to each other on the water/steam side via a heat recovery steam generator. If comparable design parameters are applied slightly higher plant efficiencies can be obtained with the topping process. With respect to a higher power plant availability it is possible to operate both types of circuit arrangement without gas turbine. The specific investment cost of such combined cycle power plants is lower than that of corresponding steam power plants. Hence, they can represent economical solutions as far as the price ratio between natural gas and coal is not extremely high. In ecological respects, the advantage of this combination is a reduction of the specific CO{sub 2} emission by around 20-25%, compared with pure steam power plants. 1 ref., 9 figs., 2 tabs.

  20. Acoustic ground impedance meter

    Science.gov (United States)

    Zuckerwar, A. J. (Inventor)

    1984-01-01

    A method and apparatus are presented for measuring the acoustic impedance of a surface in which the surface is used to enclose one end of the chamber of a Helmholz resonator. Acoustic waves are generated in the neck of the resonator by a piston driven by a variable speed motor through a cam assembly. The acoustic waves are measured in the chamber and the frequency of the generated acoustic waves is measured by an optical device. These measurements are used to compute the compliance and conductance of the chamber and surface combined. The same procedure is followed with a calibration plate having infinite acoustic impedance enclosing the chamber of the resonator to compute the compliance and conductance of the chamber alone. Then by subtracting, the compliance and conductance for the surface is obtained.

  1. Cochlear bionic acoustic metamaterials

    Science.gov (United States)

    Ma, Fuyin; Wu, Jiu Hui; Huang, Meng; Fu, Gang; Bai, Changan

    2014-11-01

    A design of bionic acoustic metamaterial and acoustic functional devices was proposed by employing the mammalian cochlear as a prototype. First, combined with the experimental data in previous literatures, it is pointed out that the cochlear hair cells and stereocilia cluster are a kind of natural biological acoustic metamaterials with the negative stiffness characteristics. Then, to design the acoustic functional devices conveniently in engineering application, a simplified parametric helical structure was proposed to replace actual irregular cochlea for bionic design, and based on the computational results of such a bionic parametric helical structure, it is suggested that the overall cochlear is a local resonant system with the negative dynamic effective mass characteristics. There are many potential applications in the bandboard energy recovery device, cochlear implant, and acoustic black hole.

  2. Computational Ocean Acoustics

    CERN Document Server

    Jensen, Finn B; Porter, Michael B; Schmidt, Henrik

    2011-01-01

    Since the mid-1970s, the computer has played an increasingly pivotal role in the field of ocean acoustics. Faster and less expensive than actual ocean experiments, and capable of accommodating the full complexity of the acoustic problem, numerical models are now standard research tools in ocean laboratories. The progress made in computational ocean acoustics over the last thirty years is summed up in this authoritative and innovatively illustrated new text. Written by some of the field's pioneers, all Fellows of the Acoustical Society of America, Computational Ocean Acoustics presents the latest numerical techniques for solving the wave equation in heterogeneous fluid–solid media. The authors discuss various computational schemes in detail, emphasizing the importance of theoretical foundations that lead directly to numerical implementations for real ocean environments. To further clarify the presentation, the fundamental propagation features of the techniques are illustrated in color. Computational Ocean A...

  3. Ocean acoustic reverberation tomography.

    Science.gov (United States)

    Dunn, Robert A

    2015-12-01

    Seismic wide-angle imaging using ship-towed acoustic sources and networks of ocean bottom seismographs is a common technique for exploring earth structure beneath the oceans. In these studies, the recorded data are dominated by acoustic waves propagating as reverberations in the water column. For surveys with a small receiver spacing (e.g., ocean acoustic reverberation tomography, is developed that uses the travel times of direct and reflected waves to image ocean acoustic structure. Reverberation tomography offers an alternative approach for determining the structure of the oceans and advancing the understanding of ocean heat content and mixing processes. The technique has the potential for revealing small-scale ocean thermal structure over the entire vertical height of the water column and along long survey profiles or across three-dimensional volumes of the ocean. For realistic experimental geometries and data noise levels, the method can produce images of ocean sound speed on a smaller scale than traditional acoustic tomography.

  4. Numerical study on flow-induced noise for a steam stop-valve using large eddy simulation

    Science.gov (United States)

    Liu, Jiming; Zhang, Tao; Zhang, Yong'ou

    2013-09-01

    The noise induced by the fluctuant saturated steam flow under 250 °C in a stop-valve was numerically studied. The simulation was carried out using computational fluid dynamics (CFD) and ACTRAN. The acoustic field was investigated with Lighthill's acoustic analogy based on the properties of the flow field obtained using a large-eddy simulation that employs the LES-WALE dynamic model as the sub-grid-scale model. Firstly, the validation of mesh was well conducted, illustrating that two million elements were sufficient in this situation. Secondly, the treatment of the steam was deliberated, and conclusions indicate that when predicting the flow-induced noise of the stop-valve, the steam can be treated as incompressible gas at a low inlet velocity. Thirdly, the flow-induced noises under different inlet velocities were compared. The findings reveal it has remarkable influence on the flow-induced noises. Lastly, whether or not the heat preservation of the wall has influence on the noise was taken into account. The results show that heat preservation of the wall had little influence.

  5. The effect of eccentricity and spatiotemporal energy on motion silencing.

    Science.gov (United States)

    Choi, Lark Kwon; Bovik, Alan C; Cormack, Lawrence K

    2016-01-01

    The now well-known motion-silencing illusion has shown that salient changes among a group of objects' luminances, colors, shapes, or sizes may appear to cease when objects move rapidly (Suchow & Alvarez, 2011). It has been proposed that silencing derives from dot spacing that causes crowding, coherent changes in object color or size, and flicker frequencies combined with dot spacing (Choi, Bovik, & Cormack, 2014; Peirce, 2013; Turi & Burr, 2013). Motion silencing is a peripheral effect that does not occur near the point of fixation. To better understand the effect of eccentricity on motion silencing, we measured the amount of motion silencing as a function of eccentricity in human observers using traditional psychophysics. Fifteen observers reported whether dots in any of four concentric rings changed in luminance over a series of rotational velocities. The results in the human experiments showed that the threshold velocity for motion silencing almost linearly decreases as a function of log eccentricity. Further, we modeled the response of a population of simulated V1 neurons to our stimuli. We found strong matches between the threshold velocities on motion silencing observed in the human experiment and those seen in the energy model of Adelson and Bergen (1985). We suggest the plausible explanation that as eccentricity increases, the combined motion-flicker signal falls outside the narrow spatiotemporal frequency response regions of the modeled receptive fields, thereby reducing flicker visibility.

  6. Meiotic silencing by unpaired DNA: properties, regulation and suppression.

    Science.gov (United States)

    Shiu, Patrick K T; Metzenberg, Robert L

    2002-08-01

    In Neurospora, a gene not paired with a homolog in prophase I of meiosis generates a signal that transiently silences all sequences homologous to it by a process called meiotic silencing by unpaired DNA (MSUD). Thus a deletion mutation in a heterozygous cross is formally "ascus-dominant" because its unpaired wild-type partner silences itself. We describe in detail the isolation of a mutation, Sad-1(UV), that suppresses the dominance of various ascus-dominant mutations. Additional dominant, semidominant, and recessive Sad-1 alleles have been generated by RIP; the DNA of the dominant RIP alleles becomes methylated, but dim-2-dependent methylation is not necessary for silencing. The barrenness of homozygous Sad-1 crosses is not due to the failure to silence unpaired mating-type mat A-2 mat A-3 genes. Transcripts of sad-1(+) can be detected during the sexual phase in a homozygous wild-type cross, indicating that the gene is expressed even if all DNA can pair normally. Meiotic silencing is confined to the ascus in which DNA is unpaired, and silencing does not spread to neighboring asci in a fruiting body of mixed genetic constitution.

  7. Suppressors of RNA silencing encoded by tomato leaf curl betasatellites

    Indian Academy of Sciences (India)

    Richa Shukla; Sunita Dalal; V G Malathi

    2013-03-01

    Virus encoded RNA-silencing suppressors (RSSs) are the key components evolved by the viruses to counter RNA-silencing defense of plants. Whitefly-transmitted begomoviruses infecting tomato crop code for five different proteins, ORF AC4, ORF AC2 and ORF AV2 in DNA-A component, ORF BV1 in DNA-B and ORF C1 in satellite DNA which are predicted to function as silencing suppressors. In the present study suppressor function of ORF C1 of three betasatellites Tomato leaf curl Bangalore betasatellite ToLCBB-[IN:Hess:08], Cotton leaf curl Multan betasatellite CLCuMB–[IN:Sri:02] and Luffa leaf distortion betasatellite LuLDB-[IN:Lu:04] were examined. Agroinfiltration of GFP-silenced Nicotiana tabaccum cv. Xanthi with the cells expressing C1 protein resulted in reversal of silenced GFP expression. GFP-siRNA level was more than 50-fold lower compared to silenced plants in plants infiltrated with C1 gene from ToLCBB. However, in the case of 35S-C1 CLCuMB and 35S-C1 LuLDB construct, although GFP was expressed, siRNA level was not reduced, indicating that the step at which C1 interfere in RNA-silencing pathway is different.

  8. Comparative evaluation of surface and downhole steam-generation techniques

    Science.gov (United States)

    Hart, C.

    The application of heat to reservoirs containing high API gravity oils can substantially improve recovery. Although steam injection is currently the principal thermal recovery method, heat transmission losses associated with delivery of the steam from the surface generators to the oil bearing formation has limited conventional steam injection to shallow reservoirs. The objective of the Department of Energy's Project DEEP STEAM is to develop the technology required to economically produce heavy oil from deep reservoirs. The tasks included in this effort are the development and evaluation of thermally efficient delivery systems and downhole steam generation systems. The technical and economic performance of conventional surface steam drives, which are strongly influenced by heat losses are compared. The selection of a preferred technology based upon either total efficiency or cost is found to be strongly influenced by reservoir depth, steam mass flow rate, and sandface steam quality.

  9. Steam generator tubesheet waterlancing at Bruce B

    Energy Technology Data Exchange (ETDEWEB)

    Persad, R. [Babcock and Wilcox Canada, Cambridge, Ontario (Canada); Eybergen, D. [Bruce Power, Tiverton, Ontario (Canada)

    2006-07-01

    High pressure water cleaning of steam generator secondary side tubesheet surfaces is an important and effective strategy for reducing or eliminating under-deposit chemical attack of the tubing. At the Bruce B station, reaching the interior of the tube bundle with a high-pressure water lance is particularly challenging due to the requirement to setup on-boiler equipment within the containment bellows. This paper presents how these and other design constraints were solved with new equipment. Also discussed is the application of new high-resolution inter-tube video probe capability to the Bruce B steam generator tubesheets. (author)

  10. Fourth international seminar on horizontal steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Tuomisto, H. [ed.] [IVO Group, Vantaa (Finland); Purhonen, H. [ed.] [VTT, Espoo (Finland); Kouhia, V. [ed.] [Lappeenranta Univ. of Technology (Finland)

    1997-12-31

    The general objective of the International Seminars of Horizontal Steam Generator Modelling has been the improvement in understanding of realistic thermal hydraulic behaviour of the generators when performing safety analyses for VVER reactors. The main topics presented in the fourth seminar were: thermal hydraulic experiments and analyses, primary collector integrity, feedwater distributor replacement, management of primary-to-secondary leakage accidents and new developments in the VVER safety technology. The number of participants, representing designers and manufacturers of the horizontal steam generators, plant operators, engineering companies, research organizations, universities and regulatory authorities, was 70 from 10 countries.

  11. Sintering of nickel steam reforming catalysts

    DEFF Research Database (Denmark)

    Sehested, Jens; Larsen, Niels Wessel; Falsig, Hanne;

    2014-01-01

    . In this paper, particle migration and coalescence in nickel steam reforming catalysts is studied. Density functional theory calculations indicate that Ni-OH dominate nickel transport at nickel surfaces in the presence of steam and hydrogen as Ni-OH has the lowest combined energies of formation and diffusion...... compared to other potential nickel transport species. The relation between experimental catalyst sintering data and the effective mass diffusion constant for Ni-OH is established by numerical modelling of the particle migration and coalescence process. Using this relation, the effective mass diffusion...

  12. Experimental investigation of the steam wetness in a 1000 MW steam turbine

    OpenAIRE

    Kolovratník Michal; Bartoš Ondřej

    2016-01-01

    The aim of this paper is to introduce the experimental data of the wetness distribution obtained in the year 2015 in front of and behind the last stage of the 1000MW steam turbine in the power plant Temelín. Two different optical probes developed at Czech Technical University were used. For the first time in the Czech Republic pneumatic and optical measurement of the wet steam flow field in front of the last stage of a nuclear power-station steam turbine was provided. This unique measurement ...

  13. Research progress of the Superheated Steam Drying Technology

    OpenAIRE

    Shi, Yongchun; Li, Jie; Li, Xuanyou; Zhao, Gaiju; Wu, Maogang

    2012-01-01

    The superheated steam drying technology has lots of advantages such as safe, energy-saving, pollution-free and so on, so it causes more and more extensive concern. The superheated steam drying technology is introduced and its merits and faults are analyzed. The theoretical research progress of the superheated steam drying is summarized and the recent application of the materials including the food, wood, paper, sludge and lignite is stated. In brief, the superheated steam drying technol...

  14. Optimum sizing of steam turbines for concentrated solar power plants

    OpenAIRE

    Andreas Poullikkas, Constantinos Rouvas, Ioannis Hadjipaschalis, George Kourtis

    2012-01-01

    In this work, a selection of the optimum steam turbine type and size for integration in concentrated solar power (CSP) plants is carried out. In particular, the optimum steam turbine input and output interfaces for a range of CSP plant capacity sizes are identified. Also, efficiency and electricity unit cost curves for various steam turbine capacities are estimated by using a combination of the Steam Pro software module of the Thermoflow Suite 18 package and the IPP v2.1 optimization software...

  15. Transcriptional silencing of multiple genes in trophozoites of Entamoeba histolytica.

    Directory of Open Access Journals (Sweden)

    Rivka Bracha

    2006-05-01

    Full Text Available In a previous work we described the transcriptional silencing of the amoebapore A (AP-A gene (Ehap-a of Entamoeba histolytica strain HM-1:IMSS. The silencing occurred following transfection with a plasmid containing a 5' upstream region (473 bp of Ehap-a that included a truncated segment (140 bp of a short interspersed nuclear element (SINE1. Silencing remained in effect even after removal of the plasmid (clone G3. Neither short interfering RNA nor methylated DNA were detected, but the chromatin domain of Ehap-a in the gene-silenced trophozoites was modified. Two other similar genes (Ehap-b and one encoding a Saposin-like protein, SAPLIP 1 also became silenced. In the present work we demonstrate the silencing of a second gene of choice, one that encodes the light subunit of the Gal/GalNAc inhibitable lectin (Ehlgl1 and the other, the cysteine proteinase 5 (EhCP-5. This silencing occurred in G3 trophozoites transfected with a plasmid in which the 473 bp 5' upstream Ehap-a fragment was directly ligated to the second gene. Transcriptional silencing occurred in both the transgene and the chromosomal gene. SINE1 sequences were essential, as was a direct connection between the Ehap-a upstream region and the beginning of the open reading frame of the second gene. Gene silencing did not occur in strain HM-1:IMSS with any of these plasmid constructs. The trophozoites with two silenced genes were virulence-attenuated as were those of clone G3. In addition, trophozoites not expressing Lgl1 and AP-A proteins had a significantly reduced ability to cap the Gal/GalNAc-lectin to the uroid region when incubated with antibodies against the heavy (170 kDa subunit of the lectin. Lysates of trophozoites lacking cysteine proteinase 5 and AP-A proteins had 30% less cysteine proteinase activity than those of HM-1:IMSS strain or the G3 clone. Silencing of other genes in G3 amoebae could provide a model to study their various functions. In addition, double gene-silenced

  16. Flat acoustic lens by acoustic grating with curled slits

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Pai; Xiao, Bingmu; Wu, Ying, E-mail: ying.wu@kaust.edu.sa

    2014-10-03

    We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry–Perot resonance. - Highlights: • Expression of transmission coefficient of an acoustic grating with curled slits. • Non-dispersive and tunable effective medium parameters for the acoustic grating. • A flat acoustic focusing lens with gradient index by using the acoustic grating.

  17. Improving Steam System Performance: A Sourcebook for Industry, Second Edition

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-02-23

    This sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The sourcebook is divided into three main sections: steam system basics, performance improvement opportunities, and where to find help.

  18. Recent trends in repair and refurbishing of steam turbine components

    Indian Academy of Sciences (India)

    A K Bhaduri; S K Albert; S K Ray; P Rodriguez

    2003-06-01

    The repair and refurbishing of steam generator components is discussed from the perspective of repair welding philosophy including applicable codes and regulations. Some case histories of repair welding of steam generator components are discussed with special emphasis on details of repair welding of cracked steam turbine blades and shrouds in some of the commercial nuclear power plants using procedures developed.

  19. 46 CFR 50.05-20 - Steam-propelled motorboats.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam-propelled motorboats. 50.05-20 Section 50.05-20... Application § 50.05-20 Steam-propelled motorboats. (a) The requirements covering design of the propelling... than 40 feet in length and which are propelled by machinery driven by steam shall be in accordance...

  20. 46 CFR 61.15-5 - Steam piping.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steam piping. 61.15-5 Section 61.15-5 Shipping COAST... Periodic Tests of Piping Systems § 61.15-5 Steam piping. (a) Main steam piping shall be subjected to a.... If the covering of the piping is not removed, the test pressure shall be maintained on the piping...

  1. Monitoring of Acoustic Emissions Within Geothermal Areas in Iceland: A new Tool for Geothermal Exploration.

    Science.gov (United States)

    Brandsdóttir, B.; Gudmundsson, O.

    2007-12-01

    With increased emphasis on geothermal development new exploration methods are needed in order to improve general understanding of geothermal reservoirs, characterize their extent and assess the potential for sustainable power production. Monitoring of acoustic emissions within geothermal areas may provide a new tool to evaluate the spatial extent of geothermal fields and model rock-fluid interactions. Three-dimensional seismic data have been used to assess the spatial and temporal distribution of noise within several high-temperature geothermal fields in Iceland. Seismic noise in the 4-6 Hz range within the Svartsengi field can be attributed to steam hydraulics and pressure oscillations within the geothermal reservoirs. Seismic noise surveys compliment electrical resistivity soundings and TEM-surveys by providing information pertinent to the current geothermal activity and extent of steam fields within the uppermost crust of the geothermal reservoir. Information related to acoustic emissions can thus help define targets for future wells.

  2. Passive acoustic leak detection for sodium cooled fast reactors using hidden Markov models

    Energy Technology Data Exchange (ETDEWEB)

    Riber Marklund, A. [CEA, Cadarache, DEN/DTN/STCP/LIET, Batiment 202, 13108 St Paul-lez-Durance, (France); Kishore, S. [Fast Reactor Technology Group of IGCAR, (India); Prakash, V. [Vibrations Diagnostics Division, Fast Reactor Technology Group of IGCAR, (India); Rajan, K.K. [Fast Reactor Technology Group and Engineering Services Group of IGCAR, (India)

    2015-07-01

    Acoustic leak detection for steam generators of sodium fast reactors have been an active research topic since the early 1970's and several methods have been tested over the years. Inspired by its success in the field of automatic speech recognition, we here apply hidden Markov models (HMM) in combination with Gaussian mixture models (GMM) to the problem. To achieve this, we propose a new feature calculation scheme, based on the temporal evolution of the power spectral density (PSD) of the signal. Using acoustic signals recorded during steam/water injection experiments done at the Indira Gandhi Centre for Atomic Research (IGCAR), the proposed method is tested. We perform parametric studies on the HMM+GMM model size and demonstrate that the proposed method a) performs well without a priori knowledge of injection noise, b) can incorporate several noise models and c) has an output distribution that simplifies false alarm rate control. (authors)

  3. Optimization of a clamped plate silencer.

    Science.gov (United States)

    Wang, Chunqi; Han, Jun; Huang, Lixi

    2007-02-01

    A previous theoretical study [L. Huang, J. Acoust. Soc. Am. 119, 2628-2638 (2006)] shows that, in a duct, a simply supported plate covering a side-branch rigid cavity can function effectively as a wave reflector over a broad range of low to medium frequencies. In this study, analytical formulation is extended to the boundary condition of clamped plate, which is easier to implement in practice. The theoretical model is tested experimentally using balsawood, which has a very high stiffness to mass ratio. The spectral peaks and shapes of the measured TL are in agreement with those calculated theoretically, attempts are also made to account for the considerable sound absorption in the rig. Further numerical studies based on the validated model show that, for a uniform plate, the optimal stopband is narrower and the lower band limit is worse than that of the simply supported configuration. However, a wave reflector using nonuniform, clamped plates with thinner ends out-performs the simply supported configuration in every aspect. Analyses show that the improvement is attributed to the increased acoustic radiation efficiency over the bulk length of the nonuniform plate, which behaves more like a rigid plate.

  4. Predicting Acoustics in Class Rooms

    DEFF Research Database (Denmark)

    Christensen, Claus Lynge; Rindel, Jens Holger

    2005-01-01

    Typical class rooms have fairly simple geometries, even so room acoustics in this type of room is difficult to predict using today's room acoustic computer modeling software. The reasons why acoustics of class rooms are harder to predict than acoustics of complicated concert halls might...

  5. Underwater Applications of Acoustical Holography

    Directory of Open Access Journals (Sweden)

    P. C. Mehta

    1984-01-01

    Full Text Available The paper describes the basic technique of acoustical holography. Requirements for recording the acoustical hologram are discussed with its ability for underwater imaging in view. Some practical systems for short-range and medium-range imaging are described. The advantages of acoustical holography over optical imaging, acoustical imaging and sonars are outlined.

  6. Acoustic mapping velocimetry

    Science.gov (United States)

    Muste, M.; Baranya, S.; Tsubaki, R.; Kim, D.; Ho, H.; Tsai, H.; Law, D.

    2016-05-01

    Knowledge of sediment dynamics in rivers is of great importance for various practical purposes. Despite its high relevance in riverine environment processes, the monitoring of sediment rates remains a major and challenging task for both suspended and bed load estimation. While the measurement of suspended load is currently an active area of testing with nonintrusive technologies (optical and acoustic), bed load measurement does not mark a similar progress. This paper describes an innovative combination of measurement techniques and analysis protocols that establishes the proof-of-concept for a promising technique, labeled herein Acoustic Mapping Velocimetry (AMV). The technique estimates bed load rates in rivers developing bed forms using a nonintrusive measurements approach. The raw information for AMV is collected with acoustic multibeam technology that in turn provides maps of the bathymetry over longitudinal swaths. As long as the acoustic maps can be acquired relatively quickly and the repetition rate for the mapping is commensurate with the movement of the bed forms, successive acoustic maps capture the progression of the bed form movement. Two-dimensional velocity maps associated with the bed form migration are obtained by implementing algorithms typically used in particle image velocimetry to acoustic maps converted in gray-level images. Furthermore, use of the obtained acoustic and velocity maps in conjunction with analytical formulations (e.g., Exner equation) enables estimation of multidirectional bed load rates over the whole imaged area. This paper presents a validation study of the AMV technique using a set of laboratory experiments.

  7. Steam Pyrolysis of Polyimides: Effects of Steam on Raw Material Recovery.

    Science.gov (United States)

    Kumagai, Shogo; Hosaka, Tomoyuki; Kameda, Tomohito; Yoshioka, Toshiaki

    2015-11-17

    Aromatic polyimides (PIs) have excellent thermal stability, which makes them difficult to recycle, and an effective way to recycle PIs has not yet been established. In this work, steam pyrolysis of the aromatic PI Kapton was performed to investigate the recovery of useful raw materials. Steam pyrolysis significantly enhanced the gasification of Kapton at 900 °C, resulting in 1963.1 mL g(-1) of a H2 and CO rich gas. Simultaneously, highly porous activated carbon with a high BET surface area was recovered. Steam pyrolysis increased the presence of polar functional groups on the carbon surface. Thus, it was concluded that steam pyrolysis shows great promise as a recycling technique for the recovery of useful synthetic gases and activated carbon from PIs without the need for catalysts and organic solvents.

  8. Investigation of beryllium/steam interaction

    Energy Technology Data Exchange (ETDEWEB)

    Chekhonadskikh, A.M.; Vurim, A.D.; Vasilyev, Yu.S.; Pivovarov, O.S. [Inst. of Atomic Energy National Nuclear Center of the Republic of Kazakstan Semipalatinsk (Kazakhstan); Shestakov, V.P.; Tazhibayeva, I.L.

    1998-01-01

    In this report program on investigations of beryllium emissivity and transient processes on overheated beryllium surface attacked by water steam to be carried out in IAE NNC RK within Task S81 TT 2096-07-16 FR. The experimental facility design is elaborated in this Report. (author)

  9. Steam Initiated Surface Modification of Aluminium Alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud

    using autoclave or using spray system, and with or without various chemistries as accelerators. In general, results show the formation of 650 nm – 3000 nm thick conversion coating, where the thickness depend on the treatment parameters and steam chemistry. Further, the formed coating provide good...

  10. Oriana: the voice and the silences

    Directory of Open Access Journals (Sweden)

    Mercedes Rosúa

    2007-09-01

    Full Text Available Commentators did their best to bury the late Oriana Fallaci’s ideas and books written since the 11 S under tons of praises to her previous works, and under deep silence or global discrediting her denunciation of Islamic fundamentalism and of terrorist blackmail and all its forms of getting a grip on Europe. Obituary notices avoided carefully the analysis of facts and data brought forward by Oriana in her three last books: The rage and the pride. The power of the reason and Oriana Fallaci’s inter- view with herself. The Apocalypse. But the italian journalist, who past away on 15th Sep- tember 2006, denounced substantiated facts, true dangers and a real collusion of wes- tern sectors-venal, corrupt, fainthearted and ignorant-with the strategy of penetration and manipulation of public opinion of an islamic movement who is the enemy of democracies, Civil Rights, freedom and the western systems of open society.Key words: Oriana Fallaci, Islamic fundamentalism, Defence freedom, Denun- ciation fear, Europe ́s surrender, Terrorism, Western censorship. 

  11. Heat Transfer and Acoustic Properties of Open Cell Aluminum Foams

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The aluminum open cell foams have been prepared by the conventional precision casting method to investigate the thermal and acoustic properties. A water heating system and silencers were organized as a first step for its applications. The temperature increase between the top and bottom of the foam became larger as the cell size increased in the heat transfer measurement. Sound absorption ratio of the close cell foams was 60%-100%,whereas the open cell aluminum foam showed only 10%-20% of sound absorption at low frequency. When the prototype electric water heater manufactured by combining aluminum open cell foam with a heater was heated to 100-400℃, the highest temperature of water was in the range of 16-46℃. This suggests that there could be potential for this type of heater to be used as a commercial electric water heater. Sound silencer made with the aluminum open cell foam was applied to exit of exhaustion side at air pressure line. Sound silencing effect of open-celled aluminum foam showed that the noise level went down by introducing smaller cell size foam.

  12. Implications of Silence in Conversation within the Framework of Cooperative Principle

    Institute of Scientific and Technical Information of China (English)

    Chen Shiyao

    2014-01-01

    Silence is a common linguistic phenomenon which plays an important role in communication. This paper, taking a pragmatic perspective, analyzes silence in human communication and points out its pragmatic value. It indicates that silence is not a negative phenomenon with the Cooperative Principle and then deals with the implications of silence in conversation.

  13. Locus-specific ribosomal RNA gene silencing in nucleolar dominance.

    Directory of Open Access Journals (Sweden)

    Michelle S Lewis

    Full Text Available The silencing of one parental set of rRNA genes in a genetic hybrid is an epigenetic phenomenon known as nucleolar dominance. We showed previously that silencing is restricted to the nucleolus organizer regions (NORs, the loci where rRNA genes are tandemly arrayed, and does not spread to or from neighboring protein-coding genes. One hypothesis is that nucleolar dominance is the net result of hundreds of silencing events acting one rRNA gene at a time. A prediction of this hypothesis is that rRNA gene silencing should occur independent of chromosomal location. An alternative hypothesis is that the regulatory unit in nucleolar dominance is the NOR, rather than each individual rRNA gene, in which case NOR localization may be essential for rRNA gene silencing. To test these alternative hypotheses, we examined the fates of rRNA transgenes integrated at ectopic locations. The transgenes were accurately transcribed in all independent transgenic Arabidopsis thaliana lines tested, indicating that NOR localization is not required for rRNA gene expression. Upon crossing the transgenic A. thaliana lines as ovule parents with A. lyrata to form F1 hybrids, a new system for the study of nucleolar dominance, the endogenous rRNA genes located within the A. thaliana NORs are silenced. However, rRNA transgenes escaped silencing in multiple independent hybrids. Collectively, our data suggest that rRNA gene activation can occur in a gene-autonomous fashion, independent of chromosomal location, whereas rRNA gene silencing in nucleolar dominance is locus-dependent.

  14. Literature Review of Researchs Related Organizational Silence in Turkey

    OpenAIRE

    Bayın, Arş. Grv. Gamze

    2015-01-01

    The purpose of this study is to detect the contributions of other variables which taken together with the organizational silence and to be guiding to the following studies by examining the researches in Turkey about organizational silence. To reach all of researches, electronic databases such as Google academic search, YOK database, PubMed, EBSCOhost, ISI Web of Knowledge, ProQuest, Science Direct, Scopus were searched. In this way; articles, books, thesis, book chapters and papers h...

  15. Synthetic RNA silencing in bacteria - antimicrobial discovery and resistance breaking

    Directory of Open Access Journals (Sweden)

    James E.M. Stach

    2011-09-01

    Full Text Available The increasing incidence and prevalence of antibiotic resistance in bacteria threatens the antibiotic miracle. Conventional antimicrobial drug development has failed to replace the armamentarium needed to combat this problem, and novel solutions are urgently required. Here we review both natural and synthetic RNA silencing and its potential to provide new antibacterials through improved target selection, evaluation and screening. Furthermore, we focus on synthetic RNA silencers as a novel class of antibacterials and review their unique properties.

  16. ORGANIZATIONAL SILENCE: SUATU PENGHAMBAT DALAM MEWUJUDKAN KREATIFITAS ORGANISASIONAL

    Directory of Open Access Journals (Sweden)

    Berta Bekti Retnawati

    2016-11-01

    Full Text Available There are powerful forces in many organzations that cause widespread withholding of information about potential problems or issues by employess, this collective-level phenomenon as ‘organizational silence’. One significant effect of organizational silence relates to lack of organizational creativity.There are five major organizational factors that enhance creativity in a work environment: organizational climate, leadership style, organizational culture, resources and skills, the structure and system of an organization. Keywords: organizational silence, organizational creativity

  17. A study of steam injection in fractured media

    Energy Technology Data Exchange (ETDEWEB)

    Dindoruk, M.D.S.; Aziz, K.; Brigham, W.; Castanier, L.

    1996-02-01

    Steam injection is the most widely used thermal recovery technique for unfractured reservoirs containing heavy oil. There have been numerous studies on theoretical and experimental aspects of steam injection for such systems. Fractured reservoirs contain a large fraction of the world supply of oil, and field tests indicate that steam injection is feasible for such reservoirs. Unfortunately there has been little laboratory work done on steam injection in such systems. The experimental system in this work was designed to understand the mechanisms involved in the transfer of fluids and heat between matrix rocks and fractures under steam injection.

  18. Study on mathematical model of steam coal blending

    Institute of Scientific and Technical Information of China (English)

    高洪阁; 李白英; 刘泽常; 尹增德

    2002-01-01

    It is necessary to set up a new mathematical model of steam coal blending instead of the old model. Indexes such as moisture content, ash content, volatile matter, sulfur content and heating value in the new mathematical model have linear relation. The new mathematical model can also predict ash-fusion temperature precisely by considering coal ash ratio in steam coal blending, therefore it is possible to obtain linear relation of ash-fusion temperature between single coal and steam coal blending. The new mathematical model can improve precision of steam coal blending and perfect the old mathematical model of steam coal blending.

  19. Nondestructive Evaluation of Metal Fatigue Using Nonlinear Acoustics

    Science.gov (United States)

    Cantrell, John H., Jr.

    2008-01-01

    Safe-life and damage-tolerant design philosophies of high performance structures have driven the development of various methods to evaluate nondestructively the accumulation of damage in such structures resulting from cyclic loading. Although many techniques have proven useful, none has been able to provide an unambiguous, quantitative assessment of damage accumulation at each stage of fatigue from the virgin state to fracture. A method based on nonlinear acoustics is shown to provide such a means to assess the state of metal fatigue. The salient features of an analytical model are presented of the microelastic-plastic nonlinearities resulting from the interaction of an acoustic wave with fatigue-generated dislocation substructures and cracks that predictably evolve during the metal fatigue process. The interaction is quantified by the material (acoustic) nonlinearity parameter extracted from acoustic harmonic generation measurements. The parameters typically increase monotonically by several hundred percent over the fatigue life of the metal, thus providing a unique measure of the state of fatigue. Application of the model to aluminum alloy 2024-T4, 410Cb stainless steel, and IN100 nickel-base superalloy specimens fatigued using different loading conditions yields good agreement between theory and experiment. Application of the model and measurement technique to the on-site inspection of steam turbine blades is discussed.

  20. Acoustic Igniter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — An acoustic igniter eliminates the need to use electrical energy to drive spark systems to initiate combustion in liquid-propellant rockets. It does not involve the...

  1. Acoustic imaging system

    Science.gov (United States)

    Kendall, J. M., Jr.

    1977-01-01

    Tool detects noise sources by scanning sound "scene" and displaying relative location of noise-producing elements in area. System consists of ellipsoidal acoustic mirror and microphone and a display device.

  2. Acoustic imaging system

    Science.gov (United States)

    Smith, Richard W.

    1979-01-01

    An acoustic imaging system for displaying an object viewed by a moving array of transducers as the array is pivoted about a fixed point within a given plane. A plurality of transducers are fixedly positioned and equally spaced within a laterally extending array and operatively directed to transmit and receive acoustic signals along substantially parallel transmission paths. The transducers are sequentially activated along the array to transmit and receive acoustic signals according to a preestablished sequence. Means are provided for generating output voltages for each reception of an acoustic signal, corresponding to the coordinate position of the object viewed as the array is pivoted. Receptions from each of the transducers are presented on the same display at coordinates corresponding to the actual position of the object viewed to form a plane view of the object scanned.

  3. An acoustic invisible gateway

    CERN Document Server

    Zhu, Yi-Fan; Liang, Bin; Kan, Wei-Wei; Yang, Jun; Cheng, Jian-Chun

    2015-01-01

    The recently-emerged concept of "invisible gateway" with the extraordinary capability to block the waves but allow the passage of other entities has attracted great attentions due to the general interests in illusion devices. However, the possibility to realize such a fascinating phenomenon for acoustic waves has not yet been explored, which should be of paramount significance for acoustical applications but would necessarily involve experimental difficulty. Here we design and experimentally demonstrate an acoustic invisible gateway (AIG) capable of concealing a channel under the detection of sound. Instead of "restoring" a whole block of background medium by using transformation acoustics that inevitably requires complementary or restoring media with extreme parameters, we propose an inherently distinct methodology that only aims at engineering the surface impedance at the "gate" to mimic a rigid "wall" and can be conveniently implemented by decorating meta-structures behind the channel. Such a simple yet ef...

  4. Acoustics Noise Test Cell

    Data.gov (United States)

    Federal Laboratory Consortium — The Acoustic Noise Test Cell at the NASA/Caltech Jet Propulsion Laboratory (JPL) is located adjacent to the large vibration system; both are located in a class 10K...

  5. Thermal Acoustic Fatigue Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — The Thermal Acoustic Fatigue Apparatus (TAFA) is a progressive wave tube test facility that is used to test structures for dynamic response and sonic fatigue due to...

  6. Autonomous Acoustic Receiver System

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Collects underwater acoustic data and oceanographic data. Data are recorded onboard an ocean buoy and can be telemetered to a remote ship or shore station...

  7. Principles of musical acoustics

    CERN Document Server

    Hartmann, William M

    2013-01-01

    Principles of Musical Acoustics focuses on the basic principles in the science and technology of music. Musical examples and specific musical instruments demonstrate the principles. The book begins with a study of vibrations and waves, in that order. These topics constitute the basic physical properties of sound, one of two pillars supporting the science of musical acoustics. The second pillar is the human element, the physiological and psychological aspects of acoustical science. The perceptual topics include loudness, pitch, tone color, and localization of sound. With these two pillars in place, it is possible to go in a variety of directions. The book treats in turn, the topics of room acoustics, audio both analog and digital, broadcasting, and speech. It ends with chapters on the traditional musical instruments, organized by family. The mathematical level of this book assumes that the reader is familiar with elementary algebra. Trigonometric functions, logarithms and powers also appear in the book, but co...

  8. Symptoms of Acoustic Neuroma

    Science.gov (United States)

    ... Programs & Services Search ANAUSA.org Connect with us! Symptoms of Acoustic Neuroma Each heading slides to reveal more information. Early Symptoms Early Symptoms Early symptoms are easily overlooked, thus making diagnosis ...

  9. Homoeologous gene silencing in tissue cultured wheat callus

    Directory of Open Access Journals (Sweden)

    Chapman Natalie H

    2008-10-01

    Full Text Available Abstract Background In contrast to diploids, most polyploid plant species, which include the hexaploid bread wheat, possess an additional layer of epigenetic complexity. Several studies have demonstrated that polyploids are affected by homoeologous gene silencing, a process in which sub-genomic genomic copies are selectively transcriptionally inactivated. This form of silencing can be tissue specific and may be linked to developmental or stress responses. Results Evidence was sought as to whether the frequency of homoeologous silencing in in vitro cultured wheat callus differ from that in differentiated organs, given that disorganized cells are associated with a globally lower level of DNA methylation. Using a reverse transcription PCR (RT-PCR single strand conformation polymorphism (SSCP platform to detect the pattern of expression of 20 homoeologous sets of single-copy genes known to be affected by this form of silencing in the root and/or leaf, we observed no silencing in any of the wheat callus tissue tested. Conclusion Our results suggest that much of the homoeologous silencing observed in differentiated tissues is probably under epigenetic control, rather than being linked to genomic instability arising from allopolyploidization. This study reinforces the notion of plasticity in the wheat epi-genome.

  10. Anal acoustic reflectometry

    DEFF Research Database (Denmark)

    Mitchell, Peter J; Klarskov, Niels; Telford, Karen J;

    2011-01-01

    Anal acoustic reflectometry is a new technique of assessing anal sphincter function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, the opening and closing elastance, and hysteresis.......Anal acoustic reflectometry is a new technique of assessing anal sphincter function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, the opening and closing elastance, and hysteresis....

  11. Mathematical modeling of control system for the experimental steam generator

    Science.gov (United States)

    Podlasek, Szymon; Lalik, Krzysztof; Filipowicz, Mariusz; Sornek, Krzysztof; Kupski, Robert; Raś, Anita

    2016-03-01

    A steam generator is an essential unit of each cogeneration system using steam machines. Currently one of the cheapest ways of the steam generation can be application of old steam generators came from army surplus store. They have relatively simple construction and in case of not so exploited units - quite good general conditions, and functionality of mechanical components. By contrast, electrical components and control systems (mostly based on relay automatics) are definitely obsolete. It is not possible to use such units with cooperation of steam bus or with steam engines. In particular, there is no possibility for automatically adjustment of the pressure and the temperature of the generated steam supplying steam engines. Such adjustment is necessary in case of variation of a generator load. The paper is devoted to description of improvement of an exemplary unit together with construction of the measurement-control system based on a PLC. The aim was to enable for communication between the steam generator and controllers of the steam bus and steam engines in order to construction of a complete, fully autonomic and maintenance-free microcogeneration system.

  12. Corrosion Evaluation and Corrosion Control of Steam Generators

    Energy Technology Data Exchange (ETDEWEB)

    Maeng, W. Y.; Kim, U. C.; Sung, K. W.; Na, J. W.; Lee, Y. H.; Lee, D. H.; Kim, K. M

    2008-06-15

    Corrosion damage significantly influences the integrity and efficiency of steam generator. Corrosion problems of steam generator are unsolved issues until now even though much effort is made around world. Especially the stress corrosion cracking of heat exchange materials is the first issue to be solved. The corrosion protection method of steam generator is important and urgent for the guarantee of nuclear plant's integrity. The objectives of this study are 1) to evaluate the corrosion properties of steam generator materials, 2) to optimize the water chemistry of steam generator and 3) to develop the corrosion protection method of primary and secondary sides of steam generator. The results will be reflected to the water chemistry guideline for improving the integrity and efficiency of steam generator in domestic power plants.

  13. XPS and IGC characterization of steam treated triticale straw

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Liyan, E-mail: Liyan.zhao@albertainnovates.ca [Cellulose and Hemicellulose Program, Forest Products, Alberta Innovates-Technology Futures, 250 Karl Clark Road, Edmonton, AB T6N 1E4 (Canada); Boluk, Yaman [Cellulose and Hemicellulose Program, Forest Products, Alberta Innovates-Technology Futures, 250 Karl Clark Road, Edmonton, AB T6N 1E4 (Canada)

    2010-10-15

    The surface chemical composition and surface energy of native and steam treated triticale straws have been investigated by X-ray photoelectron spectroscopy (XPS) and inverse gas chromatography (IGC) to reveal the effect of steam treatment temperature and time. The XPS results show that the contents of C elements and C-C group on the exterior surface of native triticale straw are much higher than those on the interior surface, indicating that there was a high quantity of wax on the exterior surface of the native triticale straw. Upon steam treatment, both carbon levels and C-C groups reduce with increasing steam temperature and treatment time of the exterior surfaces. However, the effect of steam treatment on the interior surface is very limited. In terms of the surface acid and base properties, the steam treated samples exhibited higher acid and base properties than the native sample, indicating a more polar surface of the steam treated sample.

  14. XPS and IGC characterization of steam treated triticale straw

    Science.gov (United States)

    Zhao, Liyan; Boluk, Yaman

    2010-10-01

    The surface chemical composition and surface energy of native and steam treated triticale straws have been investigated by X-ray photoelectron spectroscopy (XPS) and inverse gas chromatography (IGC) to reveal the effect of steam treatment temperature and time. The XPS results show that the contents of C elements and C-C group on the exterior surface of native triticale straw are much higher than those on the interior surface, indicating that there was a high quantity of wax on the exterior surface of the native triticale straw. Upon steam treatment, both carbon levels and C-C groups reduce with increasing steam temperature and treatment time of the exterior surfaces. However, the effect of steam treatment on the interior surface is very limited. In terms of the surface acid and base properties, the steam treated samples exhibited higher acid and base properties than the native sample, indicating a more polar surface of the steam treated sample.

  15. Computerized operating cost model for industrial steam generation

    Energy Technology Data Exchange (ETDEWEB)

    Powers, T.D.

    1983-02-01

    Pending EPA regulations, establishing revised emission levels for industrial boilers are perceived to have an effect on the relative costs of steam production technologies. To aid in the comparison of competitive boiler technologies, the Steam Cost Code was developed which provides levelized steam costs reflecting the effects of a number of key steam cost parameters. The Steam Cost Code is a user interactive FORTRAN program designed to operate on a VAX computer system. The program requires the user to input a number of variables describing the design characteristics, capital costs, and operating conditions for a specific boiler system. Part of the input to the Steam Cost Code is the capital cost of the steam production system. The capital cost is obtained from a program called INDCEPT, developed by Oak Ridge National Laboratory under Department of Energy, Morgantown Energy Technology Center sponsorship.

  16. Investigation of the steam-cooled blade in a steam turbine cascade

    Institute of Scientific and Technical Information of China (English)

    Dieter Bohn; Jing Ren; Karsten Kusterer

    2007-01-01

    With the increasing demand for electricity,an efficiency improvement and thereby reduced CO2 emissions of the coal-fired plants are expected in order to reach the goals set in the Kyoto protocol.It can be achieved by a rise of the process parameters.Currently,live steam pressures and temperatures up to 300 bars and 923 K are planned as the next step.Closed circuit steam cooling of blades and vanes in modern steam turbines is a promising technology in order to establish elevated live steam temperatures in future steam turbine cycles.In this paper,a steam-cooled test vane in a cascade with external hot steam flow is analyzed numerically with the in-house code CHTflow.A parametric analysis aiming to improve the cooling effectiveness is carried out by varying the cooling mass flow ratio.The results from two investigated cases show that the steam cooling technique has a good application potential in the steam turbine.The internal part of the vane is cooled homogeneously in both cases.With the increased cooling mass flow rate,there is a significant improvement of cooling efficiency at the leading edge.The results show that the increased cooling mass flow ratio can enhance the cooling effectiveness at the leading edge.With respect to trailing edge,there is no observable improvement of cooling effectiveness with the increased cooling mass flow.This implies that due to the limited dimension at the trailing edge,the thermal stress cannot be decreased by increasing the cooling mass flow rate.Therefore,impingement-cooling configuration at the trailing edge might be a solution to overcome the critical thermal stress there.It is also observed that the performance of the cooling effective differs on pressure side and suction side.It implicates that the equilibrium of the cooling effectiveness on two sides are influenced by a coupled relationship between cooling mass flow ratio and hole geometry.In future work,optimizing the hole geometry and cooling steam supply conditions might

  17. A Study on the Evaluation of Valve Leak Rates Using Acoustic Emission Technique

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Guk; Lee, Jun Shin; Lee, Sun Ki; Shon, Seok Man; Lee, Wook Ryun; Kim, Tae Ryong [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Lim, Yong Jae; Choo, Kee Young [Hana Evertech Co., Seongnam (Korea, Republic of)

    2005-07-01

    The objective of this study is to estimate the feasibility of acoustic emission method for the internal leak from the valves. In this study, two types of valve(a 3 1/2 inch glove valve for 600 psi steam and a 4 inch ball valve water ) leak tests using three different leak path and numerous leak rates were performed in order to analyze acoustic emission properties when leaks arise in valve seat. As a result of leak test for specimens simulated valve seat, we conformed that leak sound amplitude increased in proportion to the increase of leak rate, and leak rates were plotted versus peak acoustic amplitudes recorded within those two narrow frequency bands on each spectral plot. The resulting plots of leak rate versus peak acoustic amplitude were the primary basis for determining the feasibility of quantifying leak acoustically. The large amount of data collected also allowed a grief investigation of the effects of different leak paths, leakage rates, pressure differentials and transducers on the acoustic amplitude spectra. From the experimental results, it was suggested that the acoustic emission method for monitoring of leak was feasible.

  18. A Comparative Study on Performance Parameters of a Conventional Silencer versus Helmholtz Silencer Implemented On A 100cc Motorcycle

    Directory of Open Access Journals (Sweden)

    Saurabh Jadhav

    2014-06-01

    Full Text Available Automotive noise and pollution control are critical fields of study and research in recent years. Researchers all across the globe are focusing on making vehicles environmentally friendly by reducing sound and air pollution achieved through implementing various modern technologies. This paper concentrates on the study of noise and pollution performance of a 100cc motorbike on a custom fabricated Helmholtz silencer over a conventional silencer.

  19. A three-dimensional laboratory steam injection model allowing in situ saturation measurements. [Comparing steam injection and steam foam injection with nitrogen and without nitrogen

    Energy Technology Data Exchange (ETDEWEB)

    Demiral, B.M.R.; Pettit, P.A.; Castanier, L.M.; Brigham, W.E.

    1992-08-01

    The CT imaging technique together with temperature and pressure measurements were used to follow the steam propagation during steam and steam foam injection experiments in a three dimensional laboratory steam injection model. The advantages and disadvantages of different geometries were examined to find out which could best represent radial and gravity override flows and also fit the dimensions of the scanning field of the CT scanner. During experiments, steam was injected continuously at a constant rate into the water saturated model and CT scans were taken at six different cross sections of the model. Pressure and temperature data were collected with time at three different levels in the model. During steam injection experiments, the saturations obtained by CT matched well with the temperature data. That is, the steam override as observed by temperature data was also clearly seen on the CT pictures. During the runs where foam was present, the saturation distributions obtained from CT pictures showed a piston like displacement. However, the temperature distributions were different depending on the type of steam foam process used. The results clearly show that the pressure/temperature data alone are not sufficient to study steam foam in the presence of non-condensible gas.

  20. The Enamovirus P0 protein is a silencing suppressor which inhibits local and systemic RNA silencing through AGO1 degradation

    Energy Technology Data Exchange (ETDEWEB)

    Fusaro, Adriana F. [University of Sydney, NSW 2006 (Australia); CSIRO Plant Industry, Canberra, P.O. Box 1600, ACT 2601 (Australia); Correa, Regis L. [CSIRO Plant Industry, Canberra, P.O. Box 1600, ACT 2601 (Australia); Depto. de Virologia, IMPPG, UFRJ, 21941-902 (Brazil); Nakasugi, Kenlee; Jackson, Craig [University of Sydney, NSW 2006 (Australia); Kawchuk, Lawrence [Research Centre, Agriculture and Agri-Food Canada, Lethbridge, AB T1J4B1 (Canada); Vaslin, Maite F.S. [Depto. de Virologia, IMPPG, UFRJ, 21941-902 (Brazil); Waterhouse, Peter M., E-mail: peter.waterhouse@sydney.edu.au [University of Sydney, NSW 2006 (Australia); CSIRO Plant Industry, Canberra, P.O. Box 1600, ACT 2601 (Australia)

    2012-05-10

    The P0 protein of poleroviruses and P1 protein of sobemoviruses suppress the plant's RNA silencing machinery. Here we identified a silencing suppressor protein (SSP), P0{sup PE}, in the Enamovirus Pea enation mosaic virus-1 (PEMV-1) and showed that it and the P0s of poleroviruses Potato leaf roll virus and Cereal yellow dwarf virus have strong local and systemic SSP activity, while the P1 of Sobemovirus Southern bean mosaic virus supresses systemic silencing. The nuclear localized P0{sup PE} has no discernable sequence conservation with known SSPs, but proved to be a strong suppressor of local silencing and a moderate suppressor of systemic silencing. Like the P0s from poleroviruses, P0{sup PE} destabilizes AGO1 and this action is mediated by an F-box-like domain. Therefore, despite the lack of any sequence similarity, the poleroviral and enamoviral SSPs have a conserved mode of action upon the RNA silencing machinery.

  1. Acoustic vector sensor signal processing

    Institute of Scientific and Technical Information of China (English)

    SUN Guiqing; LI Qihu; ZHANG Bin

    2006-01-01

    Acoustic vector sensor simultaneously, colocately and directly measures orthogonal components of particle velocity as well as pressure at single point in acoustic field so that is possible to improve performance of traditional underwater acoustic measurement devices or detection systems and extends new ideas for solving practical underwater acoustic engineering problems. Although acoustic vector sensor history of appearing in underwater acoustic area is no long, but with huge and potential military demands, acoustic vector sensor has strong development trend in last decade, it is evolving into a one of important underwater acoustic technology. Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.

  2. Acoustic comfort in eating establishments

    DEFF Research Database (Denmark)

    Svensson, David; Jeong, Cheol-Ho; Brunskog, Jonas

    2014-01-01

    The subjective concept of acoustic comfort in eating establishments has been investigated in this study. The goal was to develop a predictive model for the acoustic comfort, by means of simple objective parameters, while also examining which other subjective acoustic parameters could help explain...... the feeling of acoustic comfort. Through several layers of anal ysis, acoustic comfort was found to be rather complex, and could not be explained entirely by common subjective parameters such as annoyance, intelligibility or privacy. A predictive model for the mean acoustic comfort for an eating establishment...

  3. Interactions in an acoustic world

    CERN Document Server

    Simaciu, Ion; Borsos, Zoltan; Bradac, Mariana

    2016-01-01

    The present paper aims to complete an earlier paper where the acoustic world was introduced. This is accomplished by analyzing the interactions which occur between the inhomogeneities of the acoustic medium, which are induced by the acoustic vibrations traveling in the medium. When a wave packet travels in a medium, the medium becomes inhomogeneous. The spherical wave packet behaves like an acoustic spherical lens for the acoustic plane waves. According to the principle of causality, there is an interaction between the wave and plane wave packet. In specific conditions the wave packet behaves as an acoustic black hole.

  4. Steam-frothing of milk for coffee

    DEFF Research Database (Denmark)

    Münchow, Morten; Jørgensen, Leif; Amigo Rubio, Jose Manuel

    2015-01-01

    A method for evaluation of the foaming properties of steam-frothed milk, based on image analysis (feature extraction) carried out on a video taken immediately after foam formation, was developed. The method was shown to be able to analyse steam-frothed milk made using a conventional espresso...... machine, such as commonly used by baristas. Samples of milk, processed in a commercial dairy plant, were made with varying fat (0.5%, 0.9%, 1.5%, 2.6%, 3.5%) or protein (3.0%, 3.4%. 3.8%) content and analysed using the developed method. Increased protein content was shown to cause a delay in the formation...

  5. Integration of torrefaction with steam power plant

    Energy Technology Data Exchange (ETDEWEB)

    Zakri, B.; Saari, J.; Sermyagina, E.; Vakkilainen, E.

    2013-09-01

    Torrefaction is one of the pretreatment technologies to enhance the fuel characteristics of biomass. The efficient and continuous operation of a torrefaction reactor, in the commercial scale, demands a secure biomass supply, in addition to adequate source of heat. Biorefinery plants or biomass-fuelled steam power plants have the potential to integrate with the torrefaction reactor to exchange heat and mass, using available infrastructure and energy sources. The technical feasibility of this integration is examined in this study. A new model for the torrefaction process is introduced and verified by the available experimental data. The torrefaction model is then integrated in different steam power plants to simulate possible mass and energy exchange between the reactor and the plants. The performance of the integrated plant is investigated for different configurations and the results are compared. (orig.)

  6. Solar steam generation by heat localization.

    Science.gov (United States)

    Ghasemi, Hadi; Ni, George; Marconnet, Amy Marie; Loomis, James; Yerci, Selcuk; Miljkovic, Nenad; Chen, Gang

    2014-01-01

    Currently, steam generation using solar energy is based on heating bulk liquid to high temperatures. This approach requires either costly high optical concentrations leading to heat loss by the hot bulk liquid and heated surfaces or vacuum. New solar receiver concepts such as porous volumetric receivers or nanofluids have been proposed to decrease these losses. Here we report development of an approach and corresponding material structure for solar steam generation while maintaining low optical concentration and keeping the bulk liquid at low temperature with no vacuum. We achieve solar thermal efficiency up to 85% at only 10 kW m(-2). This high performance results from four structure characteristics: absorbing in the solar spectrum, thermally insulating, hydrophilic and interconnected pores. The structure concentrates thermal energy and fluid flow where needed for phase change and minimizes dissipated energy. This new structure provides a novel approach to harvesting solar energy for a broad range of phase-change applications.

  7. Modelling the horizontal steam generator with APROS

    Energy Technology Data Exchange (ETDEWEB)

    Ylijoki, J. [VTT Energy, Espoo (Finland); Palsinajaervi, C.; Porkholm, K. [IVO International Ltd, Vantaa (Finland)

    1995-12-31

    In this paper the capability of the five- and six-equation models of the simulation code APROS to simulate the behaviour of the horizontal steam generator is discussed. Different nodalizations are used in the modelling and the results of the stationary state runs are compared. Exactly the same nodalizations have been created for the five- and six-equation models. The main simulation results studied in this paper are void fraction and mass flow distributions in the secondary side of the steam generator. It was found that quite a large number of simulation volumes is required to simulate the distributions with a reasonable accuracy. The simulation results of the different models are presented and their validity is discussed. (orig.). 4 refs.

  8. Thermodynamic properties of superheated and supercritical steam

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, A. [Indian Inst. of Technology, New Delhi (India). Dept. of Mechanical Engineering; Panda, D.M.R. [Dadri Gas Power Station, NTPC, Gautam Buddha Nagar (India)

    2001-07-01

    An existing formulation for steam properties is due to Irvine and Liley. Their equations are convenient to program and do not require excessive computational time to produce results. The properties computed from these equations compare favourably with standard data. An additional advantage of these equations is that they follow prescribed theoretical trends by reducing to perfect-gas behaviour away from the saturation dome. However, a difficulty with these equations is that, at pressures above 10 MPa and close to the saturation dome, unacceptably large errors (above 10%) are produced. These equations are examined in the present work with a view towards enhancing their range of application through the use of additional functions. It is shown that the errors may be reduced to within 1% over the entire range of pressures (both sub-critical and super-critical pressures) required in steam-plant calculations. (author)

  9. Heat treatment of scallop adductor muscle using superheated steam.

    Science.gov (United States)

    Abe, T; Miyashita, K

    2007-08-01

    Scallop (Patinopecten yessoensis) adductor muscles were heated using superheated steam (150 and 200 degrees C), boiling (98 degrees C), and normal steaming (95 degrees C). The amounts of amino acids, water-soluble peptides, and nucleotides, expressed as extractive nitrogen in scallop products, are very important elements of quality and taste. After 15-min heating of scallop muscles with normal steaming and boiling, respective losses of 50% and 64% of the extractive nitrogen were observed. However, most extractive nitrogen (> 86%) remained in the scallop muscles treated with superheated steam at 150 and 200 degrees C. Protective effects of superheated steam against elution loss of nitrogen compounds were also observed in amino acid analyses of the heated products. The scallop-muscle surface temperature during treatment with superheated steam increased more quickly than that with normal steaming and boiling. The rapid water loss and the surface protein denaturation engendered formation of a 30-mum-thick film covering the surface, which prevented extractive nitrogen loss from internal tissues. Superheated steam treatment at 200 degrees C caused browning, surface shrinkage, and 47% weight loss. In marked contrast, the appearance and the weight loss of sample treated at 150 degrees C were almost the same as those of normal steaming and boiling-treated samples. These results suggested that superheated steaming at 150 degrees C is an optimal heat treatment of scallop adductor muscles.

  10. Enhancement of enzymatic saccharification of Eucalyptus globulus: steam explosion versus steam treatment.

    Science.gov (United States)

    Martin-Sampedro, Raquel; Revilla, Esteban; Villar, Juan C; Eugenio, Maria E

    2014-09-01

    Steam explosion and steam pre-treatment have proved capable of enhancing enzymatic saccharification of lignocellulosic materials. However, until now, these methods had not been compared under the same operational conditions and using the same raw material. Both pre-treatments lead to increased yields in the saccharification of Eucalyptus globulus; but results have been better with steam pre-treatments, despite the more accessible surface of exploded samples. The reason for this finding could be enzymatic inhibition: steam explosion causes a more extensive extraction of hemicelluloses and releases a greater amount of degradation products which can inhibit enzymatic action. Enzymatic inhibition is also dependent on the amount and chemical structure of lignin, which was also a contributing factor to the lower enzymatic yields obtained with the most severe pre-treatment. Thus, the highest yields (46.7% glucose and 73.4% xylose yields) were obtained after two cycle of steam treatment, of 5 and 3 min, at 183°C.

  11. A Numerical Study on the Supersonic Steam Ejector Use in Steam Turbine System

    Directory of Open Access Journals (Sweden)

    Lin Cai

    2013-01-01

    Full Text Available Supersonic steam ejector is widely used in steam energy systems such as refrigeration, wood drying equipment, papermaking machine, and steam turbine. In this paper the Computational Fluids Dynamics (CFD method was employed to simulate a supersonic steam ejector, SST k-w turbulence model was adopted, and both real gas model and ideal gas model for fluid property were considered and compared. The mixing chamber angle, throat length, and nozzle exit position (NXP primary pressure and temperature effects on entrainment ratio were investigated. The results show that performance of the ejector is underestimated using ideal gas model, and the entrainment ratio is 20%–40% lower than that when using real gas model. There is an optimum mixing chamber angel and NXP makes the entrainment ratio achieve its maximum; as throat length is decreased within a range, the entrainment ratio remains unchanged. Primary fluid pressure has a critical value, and the entrainment ratio reaches its peak at working critical pressure; when working steam superheat degree increases, the entrainment ratio is increased.

  12. TRIO specification of a steam boiler controller

    Energy Technology Data Exchange (ETDEWEB)

    Gargantini, A. [Politecnico di Milano (Italy). Dipt. di Electronica e Informazione; Morzenti, A. [Politecnico di Milano (Italy). Dipt. di Electronica e Informazione

    1996-12-31

    We specify a controller for a steam boiler starting from an informal descriptions of its requirements. The specification is formalized in the temporal logic TRIO and its object-oriented extension TRIO+. To obtain a maximum of abstraction and reuse we make the specification parametric with respect to all equipment and hardware features, and we avoid to impose any particular strategy in the management of the available resources and in the control of the critical physical quantities. (orig.)

  13. Materials Performance in USC Steam Portland

    Energy Technology Data Exchange (ETDEWEB)

    G.R. Holcomb; J. Tylczak; R. Hu

    2011-04-26

    Goals of the U.S. Department of Energy's Advanced Power Systems Initiatives include power generation from coal at 60% efficiency, which requires steam conditions of up to 760 C and 340 atm, co-called advanced ultrasupercritical (A-USC) steam conditions. A limitation to achieving the goal is a lack of cost-effective metallic materials that can perform at these temperatures and pressures. Some of the more important performance limitations are high-temperature creep strength, fire-side corrosion resistance, and steam-side oxidation resistance. Nickel-base superalloys are expected to be the materials best suited for steam boiler and turbine applications above about 675 C. Specific alloys of interest include Haynes 230 and 282, Inconel 617, 625 and 740, and Nimonic 263. Further validation of a previously developed chromia evaporation model is shown by examining the reactive evaporation effects resulting from exposure of Haynes 230 and Haynes 282 to moist air environments as a function of flow rate and water content. These two alloys differ in Ti and Mn contents, which may form outer layers of TiO{sub 2} or Cr-Mn spinels. This would in theory decrease the evaporation of Cr{sub 2}O{sub 3} from the scale by decreasing the activity of chromia at the scale surface, and be somewhat self-correcting as chromia evaporation concentrates the Ti and Mn phases. The apparent approximate chromia activity was found for each condition and alloy that showed chromia evaporation kinetics. As expected, it was found that increasing the gas flow rate led to increased chromia evaporation and decreased chromia activity. However, increasing the water content in moist air increased the evaporation, but results were mixed with its effect on chromia activity.

  14. Data analysis for steam generator tubing samples

    Energy Technology Data Exchange (ETDEWEB)

    Dodd, C.V.

    1996-07-01

    The objective of the Improved Eddy-Current ISI for Steam Generators program is to upgrade and validate eddy-current inspections, including probes, instrumentation, and data processing techniques for inservice inspection of new, used, and repaired steam generator tubes; to improve defect detection, classification and characterization as affected by diameter and thickness variations, denting, probe wobble, tube sheet, tube supports, copper and sludge deposits, even when defect types and other variables occur in combination; to transfer this advanced technology to NRC`s mobile NDE laboratory and staff. This report provides a description of the application of advanced eddy-current neural network analysis methods for the detection and evaluation of common steam generator tubing flaws including axial and circumferential outer-diameter stress-corrosion cracking and intergranular attack. The report describes the training of the neural networks on tubing samples with known defects and the subsequent evaluation results for unknown samples. Evaluations were done in the presence of artifacts. Computer programs are given in the appendix.

  15. Steam-chemical reactivity for irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Anderl, R.A.; McCarthy, K.A.; Oates, M.A.; Petti, D.A.; Pawelko, R.J.; Smolik, G.R. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States)

    1998-01-01

    This paper reports the results of an experimental investigation to determine the influence of neutron irradiation effects and annealing on the chemical reactivity of beryllium exposed to steam. The work entailed measurements of the H{sub 2} generation rates for unirradiated and irradiated Be and for irradiated Be that had been previously annealed at different temperatures ranging from 450degC to 1200degC. H{sub 2} generation rates were similar for irradiated and unirradiated Be in steam-chemical reactivity experiments at temperatures between 450degC and 600degC. For irradiated Be exposed to steam at 700degC, the chemical reactivity accelerated rapidly and the specimen experienced a temperature excursion. Enhanced chemical reactivity at temperatures between 400degC and 600degC was observed for irradiated Be annealed at temperatures of 700degC and higher. This reactivity enhancement could be accounted for by the increased specific surface area resulting from development of a surface-connected porosity in the irradiated-annealed Be. (author)

  16. Rotor thermal stress monitoring in steam turbines

    Science.gov (United States)

    Antonín, Bouberle; Jan, Jakl; Jindřich, Liška

    2015-11-01

    One of the issues of steam turbines diagnostics is monitoring of rotor thermal stress that arises from nonuniform temperature field. The effort of steam turbine operator is to operate steam turbine in such conditions, that rotor thermal stress doesn't exceed the specified limits. If rotor thermal stress limits are exceeded for a long time during machine operation, the rotor fatigue life is shortened and this may lead to unexpected machine failure. Thermal stress plays important role during turbine cold startup, when occur the most significant differences of temperatures through rotor cross section. The temperature field can't be measured directly in the entire rotor cross section and standardly the temperature is measured by thermocouple mounted in stator part. From this reason method for numerical solution of partial differential equation of heat propagation through rotor cross section must be combined with method for calculation of temperature on rotor surface. In the first part of this article, the application of finite volume method for calculation of rotor thermal stress is described. The second part of article deals with optimal trend generation of thermal flux, that could be used for optimal machine loading.

  17. Reliability design method for steam turbine blades

    Institute of Scientific and Technical Information of China (English)

    Jinyuan SHI

    2008-01-01

    Based on theories of probability and statistics, and taking static stresses, dynamic stresses, endurance strength, safety ratios, vibration frequencies and exciting force frequencies of blades as random variables, a reliabil-ity design method for steam turbine blades is presented. The purport and calculation method for blade reliability are expounded. The distribution parameters of random variables are determined after analysis and numerical cal-culation of test data. The fatigue strength and the vibra-tion design reliability of turbine blades are determined with the aid of a probabilistic design method and by inter-ference models for stress distribution and strength distri-bution. Some blade reliability design calculation formulas for a dynamic stress design method, a safety ratio design method for fatigue strength, and a vibration reliability design method for the first and second types of tuned blades and a packet of blades on a disk connected closely, are given together with some practical examples. With these methods, the design reliability of steam turbine blades can be guaranteed in the design stage. This research may provide some scientific basis for reliability design of steam turbine blades.

  18. Catalytic glycerol steam reforming for hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Dan, Monica, E-mail: monica.dan@itim-cj.ro; Mihet, Maria, E-mail: maria.mihet@itim-cj.ro; Lazar, Mihaela D., E-mail: diana.lazar@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 67-103 Donat Street, 400293 Cluj Napoca (Romania)

    2015-12-23

    Hydrogen production from glycerol by steam reforming combine two major advantages: (i) using glycerol as raw material add value to this by product of bio-diesel production which is obtained in large quantities around the world and have a very limited utilization now, and (ii) by implication of water molecules in the reaction the efficiency of hydrogen generation is increased as each mol of glycerol produces 7 mol of H{sub 2}. In this work we present the results obtained in the process of steam reforming of glycerol on Ni/Al{sub 2}O{sub 3}. The catalyst was prepared by wet impregnation method and characterized through different methods: N{sub 2} adsorption-desorption, XRD, TPR. The catalytic study was performed in a stainless steel tubular reactor at atmospheric pressure by varying the reaction conditions: steam/carbon ratio (1-9), gas flow (35 ml/min -133 ml/min), temperature (450-650°C). The gaseous fraction of the reaction products contain: H{sub 2}, CH{sub 4}, CO, CO{sub 2}. The optimum reaction conditions as resulted from this study are: temperature 550°C, Gly:H{sub 2}O ratio 9:1 and Ar flow 133 ml/min. In these conditions the glycerol conversion to gaseous products was 43% and the hydrogen yield was 30%.

  19. Catalytic glycerol steam reforming for hydrogen production

    Science.gov (United States)

    Dan, Monica; Mihet, Maria; Lazar, Mihaela D.

    2015-12-01

    Hydrogen production from glycerol by steam reforming combine two major advantages: (i) using glycerol as raw material add value to this by product of bio-diesel production which is obtained in large quantities around the world and have a very limited utilization now, and (ii) by implication of water molecules in the reaction the efficiency of hydrogen generation is increased as each mol of glycerol produces 7 mol of H2. In this work we present the results obtained in the process of steam reforming of glycerol on Ni/Al2O3. The catalyst was prepared by wet impregnation method and characterized through different methods: N2 adsorption-desorption, XRD, TPR. The catalytic study was performed in a stainless steel tubular reactor at atmospheric pressure by varying the reaction conditions: steam/carbon ratio (1-9), gas flow (35 ml/min -133 ml/min), temperature (450-650°C). The gaseous fraction of the reaction products contain: H2, CH4, CO, CO2. The optimum reaction conditions as resulted from this study are: temperature 550°C, Gly:H2O ratio 9:1 and Ar flow 133 ml/min. In these conditions the glycerol conversion to gaseous products was 43% and the hydrogen yield was 30%.

  20. Anti-viral RNA silencing: do we look like plants ?

    Directory of Open Access Journals (Sweden)

    Lecellier Charles-Henri

    2006-01-01

    Full Text Available Abstract The anti-viral function of RNA silencing was first discovered in plants as a natural manifestation of the artificial 'co-suppression', which refers to the extinction of endogenous gene induced by homologous transgene. Because silencing components are conserved among most, if not all, eukaryotes, the question rapidly arose as to determine whether this process fulfils anti-viral functions in animals, such as insects and mammals. It appears that, whereas the anti-viral process seems to be similarly conserved from plants to insects, even in worms, RNA silencing does influence the replication of mammalian viruses but in a particular mode: micro(miRNAs, endogenous small RNAs naturally implicated in translational control, rather than virus-derived small interfering (siRNAs like in other organisms, are involved. In fact, these recent studies even suggest that RNA silencing may be beneficial for viral replication. Accordingly, several large DNA mammalian viruses have been shown to encode their own miRNAs. Here, we summarize the seminal studies that have implicated RNA silencing in viral infection and compare the different eukaryotic responses.

  1. On the robustness of SAC silencing in closed mitosis

    Science.gov (United States)

    Ruth, Donovan; Liu, Jian

    Mitosis equally partitions sister chromatids to two daughter cells. This is achieved by properly attaching these chromatids via their kinetochores to microtubules that emanate from the spindle poles. Once the last kinetochore is properly attached, the spindle microtubules pull the sister chromatids apart. Due to the dynamic nature of microtubules, however, kinetochore-microtubule attachment often goes wrong. When this erroneous attachment occurs, it locally activates an ensemble of proteins, called the spindle assembly checkpoint proteins (SAC), which halts the mitotic progression until all the kinetochores are properly attached by spindle microtubules. The timing of SAC silencing thus determines the fidelity of chromosome segregation. We previously established a spatiotemporal model that addresses the robustness of SAC silencing in open mitosis for the first time. Here, we focus on closed mitosis by examining yeast mitosis as a model system. Though much experimental work has been done to study the SAC in cells undergoing closed mitosis, the processes responsible are not well understood. We leverage and extend our previous model to study SAC silencing mechanism in closed mitosis. We show that a robust signal of the SAC protein accumulation at the spindle pole body can be achieved. This signal is a nonlinear increasing function of number of kinetochore-microtubule attachments, and can thus serve as a robust trigger to time the SAC silencing. Together, our mechanism provides a unified framework across species that ensures robust SAC silencing and fidelity of chromosome segregation in mitosis. Intramural research program in NHLBI at NIH.

  2. Precedents and consequences of prosocial behaviors of voice and silence

    Directory of Open Access Journals (Sweden)

    Alicia Omar

    2015-09-01

    Full Text Available Prosocial behavior is that which that encourages solidarity and harmony in interpersonal relationships, and produce personal or collective benefits. Although early research on job prosociality was focused on the study of conventional behaviors such as help, courtesy and sportsmanship, the identification and operationalization of new dimensions is rapidly expanding this nomological network. Such is the case of prosocial voice and prosocial silence, recently introduced in the scientific literature. The aim of this study is to explore possible relationships between employee’s voice and employee’s silence, and their personality structure; and examine the role of interpersonal justice perceptions on such relationships. We worked with a sample of 316 employees- aged 37 years and holding a 4.2-year signority working at public and private companies in southern and central Rosario (Argentina. The subjects completed Colquitt’ Justice Organizational Scale, Eysenck Personality Questionnaire, and Van Dyne’s Prosocial Voice and Prosocial Silence Scales. Extraversion and neuroticism emerged as the strongest predictors of prosocial voice and prosocial silence, respectively. Interpersonal justice perceptions emerged as moderators of the ‘natural’ tendency of extraverted workers to engage in prosocial voice, and emotionally controlled workers to engage in prosocial silence. Such findings would indicate that the promotion of high levels of interpersonal justice on job contexts could help workers to engage in more prosocial behavior with positive effects for the organization. 

  3. Thermal hydraulic studies in steam generator test facility

    Energy Technology Data Exchange (ETDEWEB)

    Vinod, V.; Suresh Kumar, V.A.; Noushad, I.B.; Ellappan, T.R.; Rajan, K.K.; Rajan, M.; Vaidyanathan, G. [Engineering Development Group Indira Gandhi Centre for Atomic Research, Kalpakkam-603102 (India)

    2005-07-01

    Full text of publication follows: A 500 MWe fast breeder reactor is being constructed at Kalpakkam, India. This is a sodium cooled reactor with two primary and two secondary sodium loops with total 8 steam generators. The typical advantage of fast breeder plants is the high operating temperature of steam cycles and the high plant efficiency. To produce this high pressure and high temperature steam, once through straight tube vertical sodium heated steam generators are used. The steam is generated from the heat produced in the reactor core and being transported through primary and secondary sodium circuits. The steam generator is a 25 m high middle supported steam generator with expansion bend and 23 m heat transfer length. Steam Generator Test Facility (SGTF) constructed at Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam aims at performing various tests on a 5.5 MWt steam generator. This vertically simulated test article is similar in all respects to the proposed 157 MWt steam generator module for the Prototype Fast Breeder Reactor (PFBR), with reduced number of tubes. Heat transfer performance tests are done with this 19 tube steam generator at various load conditions. Sodium circuit for the SGTF is equipped with oil fired heater as heat source and centrifugal sodium pump, to pump sodium at 105 m{sup 3}/hr flow rate. Other typical components like sodium to air heat exchanger, sodium purification system and hydrogen leak detection system is also present in the sodium circuit. High pressure steam produced in the steam generator is dumped in a condenser and recycled. Important tests planned in SGTF are the heat transfer performance test, stability test, endurance test and performance test of steam generator under various transients. The controlled operation of steam generator will be studied with possible control schemes. A steady state simulation of the steam generator is done with a mathematical model. This paper gives the details of heat transfer

  4. A Century of Acoustic Metrology

    DEFF Research Database (Denmark)

    Rasmussen, Knud

    1998-01-01

    The development in acoustic measurement technique over the last century is reviewed with special emphasis on the metrological aspect.......The development in acoustic measurement technique over the last century is reviewed with special emphasis on the metrological aspect....

  5. Advanced Active Acoustics Lab (AAAL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Active Acoustics Lab (AAAL) is a state-of-the-art Undersea Warfare (USW) acoustic data analysis facility capable of both active and passive underwater...

  6. Thermodynamic wetness loss calculation in a steam turbine rotor tip section: nucleating steam flow

    Science.gov (United States)

    Joseph, Joby; Sathyanarayanan, S.; K, Vigney; Prasad, B. V. S. SS; Biswas, D.; Jimbo, T.

    2016-09-01

    Rapid expansion of steam in the last stages of a steam turbine causes condensation. The formation of liquid droplets due to condensation results in wetness losses, which include aerodynamic losses (due to friction between liquid droplets and the vapour), thermodynamic losses (due to irreversible heat addition), and braking losses (due to the impact of liquid droplets on the blade). The thermodynamic loss contributes up to 80% to the wetness losses when the diameter of the droplets formed is less than 1 μm. In this study, the thermodynamic loss in a two-dimensional steam turbine rotor tip section is numerically investigated for various operating and off-design conditions. A pressure based, Eulerian-Eulerian approach is used to model the non-equilibrium condensation process. The entropy change due to condensation is used to compute the thermodynamic losses.

  7. Steam oxidation resistant coatings for steam turbine components: a feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Agueero, A.; Garcia de Blas, J.; Muelas, R.; Sanchez, A.; Tsipas, S. [Instituto de Tecnica Aeroespacial, Madrid (Spain). Area de Materiales

    2001-07-01

    The principal objective of the COST Action 522 is to raise the operating temperatures of both gas and steam turbines in order to increase their efficiency to reduce fuel consumption and emissions. Concerning steam turbines, the operating temperature is expected to rise from 550 C to 650 C, and the use of oxidation resistant coatings is being considered for the first time in Europe. In this preliminary work, two deposition techniques have so far been explored: slurry paints and atmospheric plasma spray (APS). Commercially available materials, known to have good oxidation resistance, were selected for both deposition techniques: one aluminium slurry and three alloyed materials for thermal spray: AlFe, FeCrAl and NiAl. The coatings were characterised by SEM-EDS and steam oxidation testing was carried out at 650 C. The preliminary findings show that some of the studied coatings may offer adequate protection. (orig.)

  8. Materials for advanced ultrasupercritical steam turbines

    Energy Technology Data Exchange (ETDEWEB)

    Purgert, Robert [Energy Industries Of Ohio Inc., Independence, OH (United States); Shingledecker, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Saha, Deepak [Energy Industries Of Ohio Inc., Independence, OH (United States); Thangirala, Mani [Energy Industries Of Ohio Inc., Independence, OH (United States); Booras, George [Energy Industries Of Ohio Inc., Independence, OH (United States); Powers, John [Energy Industries Of Ohio Inc., Independence, OH (United States); Riley, Colin [Energy Industries Of Ohio Inc., Independence, OH (United States); Hendrix, Howard [Energy Industries Of Ohio Inc., Independence, OH (United States)

    2015-12-01

    The U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) have sponsored a project aimed at identifying, evaluating, and qualifying the materials needed for the construction of the critical components of coal-fired power plants capable of operating at much higher efficiencies than the current generation of supercritical plants. This increased efficiency is expected to be achieved principally through the use of advanced ultrasupercritical (A-USC) steam conditions. A limiting factor in this can be the materials of construction for boilers and for steam turbines. The overall project goal is to assess/develop materials technology that will enable achieving turbine throttle steam conditions of 760°C (1400°F)/35MPa (5000 psi). This final technical report covers the research completed by the General Electric Company (GE) and Electric Power Research Institute (EPRI), with support from Oak Ridge National Laboratory (ORNL) and the National Energy Technology Laboratory (NETL) – Albany Research Center, to develop the A-USC steam turbine materials technology to meet the overall project goals. Specifically, this report summarizes the industrial scale-up and materials property database development for non-welded rotors (disc forgings), buckets (blades), bolting, castings (needed for casing and valve bodies), casting weld repair, and casting to pipe welding. Additionally, the report provides an engineering and economic assessment of an A-USC power plant without and with partial carbon capture and storage. This research project successfully demonstrated the materials technology at a sufficient scale and with corresponding materials property data to enable the design of an A-USC steam turbine. The key accomplishments included the development of a triple-melt and forged Haynes 282 disc for bolted rotor construction, long-term property development for Nimonic 105 for blading and bolting, successful scale-up of Haynes 282 and Nimonic 263 castings using

  9. Acoustic detection of pneumothorax

    Science.gov (United States)

    Mansy, Hansen A.; Royston, Thomas J.; Balk, Robert A.; Sandler, Richard H.

    2003-04-01

    This study aims at investigating the feasibility of using low-frequency (pneumothorax detection were tested in dogs. In the first approach, broadband acoustic signals were introduced into the trachea during end-expiration and transmitted waves were measured at the chest surface. Pneumothorax was found to consistently decrease pulmonary acoustic transmission in the 200-1200-Hz frequency band, while less change was observed at lower frequencies (ppneumothorax states (pPneumothorax was found to be associated with a preferential reduction of sound amplitude in the 200- to 700-Hz range, and a decrease of sound amplitude variation (in the 300 to 600-Hz band) during the respiration cycle (pPneumothorax changed the frequency and decay rate of percussive sounds. These results imply that certain medical conditions may be reliably detected using appropriate acoustic measurements and analysis. [Work supported by NIH/NHLBI #R44HL61108.

  10. Practical acoustic emission testing

    CERN Document Server

    2016-01-01

    This book is intended for non-destructive testing (NDT) technicians who want to learn practical acoustic emission testing based on level 1 of ISO 9712 (Non-destructive testing – Qualification and certification of personnel) criteria. The essential aspects of ISO/DIS 18436-6 (Condition monitoring and diagnostics of machines – Requirements for training and certification of personnel, Part 6: Acoustic Emission) are explained, and readers can deepen their understanding with the help of practice exercises. This work presents the guiding principles of acoustic emission measurement, signal processing, algorithms for source location, measurement devices, applicability of testing methods, and measurement cases to support not only researchers in this field but also and especially NDT technicians.

  11. Passive broadband acoustic thermometry

    Science.gov (United States)

    Anosov, A. A.; Belyaev, R. V.; Klin'shov, V. V.; Mansfel'd, A. D.; Subochev, P. V.

    2016-04-01

    The 1D internal (core) temperature profiles for the model object (plasticine) and the human hand are reconstructed using the passive acoustothermometric broadband probing data. Thermal acoustic radiation is detected by a broadband (0.8-3.5 MHz) acoustic radiometer. The temperature distribution is reconstructed using a priori information corresponding to the experimental conditions. The temperature distribution for the heated model object is assumed to be monotonic. For the hand, we assume that the temperature distribution satisfies the heat-conduction equation taking into account the blood flow. The average error of reconstruction determined for plasticine from the results of independent temperature measurements is 0.6 K for a measuring time of 25 s. The reconstructed value of the core temperature of the hand (36°C) generally corresponds to physiological data. The obtained results make it possible to use passive broadband acoustic probing for measuring the core temperatures in medical procedures associated with heating of human organism tissues.

  12. Acoustics of courtyard theatres

    Institute of Scientific and Technical Information of China (English)

    WANG Jiqing

    2008-01-01

    The traditional Chinese theatre was often built with a courtyard. In such open-top space, the absence of a roof would mean little reverberation and non-diffused sound field.Acoustically the situation is quite different from that of any enclosed space. The refore, theclassic room acoustics, such as Sabine reverberation formula, would no longer be applicable due to the lack of sound reflections from the ceiling. As the parameter of reverberation time T30 shows the decay rate only, it would not properly characterize the prominent change in the fine structure of the echogram, particularly in case of a large reduction of reflections during the decay process. The sense of reverbrance in a courtyard space would differ noticeably from that of the equivalent 3D-T30 in an enclosed space. Based upon the characteristic analysis of the sound field in an open-top space, this paper presents a preliminary study on the acoustics of the courtyard theatres.

  13. Acoustics waves and oscillations

    CERN Document Server

    Sen, S.N.

    2013-01-01

    Parameters of acoustics presented in a logical and lucid style Physical principles discussed with mathematical formulations Importance of ultrasonic waves highlighted Dispersion of ultrasonic waves in viscous liquids explained This book presents the theory of waves and oscillations and various applications of acoustics in a logical and simple form. The physical principles have been explained with necessary mathematical formulation and supported by experimental layout wherever possible. Incorporating the classical view point all aspects of acoustic waves and oscillations have been discussed together with detailed elaboration of modern technological applications of sound. A separate chapter on ultrasonics emphasizes the importance of this branch of science in fundamental and applied research. In this edition a new chapter ''Hypersonic Velocity in Viscous Liquids as revealed from Brillouin Spectra'' has been added. The book is expected to present to its readers a comprehensive presentation of the subject matter...

  14. Numerical investigation of mass transfer in the flow path of the experimental model of the PGV-1500 steam generator's steam receiving section with two steam nozzles

    Science.gov (United States)

    Golibrodo, L. A.; Krutikov, A. A.; Nadinskii, Yu. N.; Nikolaeva, A. V.; Skibin, A. P.; Sotskov, V. V.

    2014-10-01

    The hydrodynamics of working medium in the steam volume model implemented in the experimental setup constructed at the Leipunskii Institute for Physics and Power Engineering was simulated for verifying the procedure of calculating the velocity field in the steam space of steam generators used as part of the reactor plants constructed on the basis of water-cooled water-moderated power-generating reactors (VVER). The numerical calculation was implemented in the environment of the STAR-CCM+ software system with its cross verification in the STAR-CD and ANSYS CFX software systems. The performed numerical investigation served as a basis for substantiating the selection of the computation code and parameters for constructing the computer model of the steam receiving device of the PGV-1500 steam generator experimental model, such as the quantization scheme, turbulence model, and mesh model.

  15. Experiments on the influence of low frequency sound on the acoustic resonances in a corrugated flow pipe

    CERN Document Server

    Kristiansen, Ulf R; Pinhède, Cédric; Amielh, Muriel

    2010-01-01

    It is well known that an air flow in a corrugated pipe might excite the longitudinal acoustic modes of the pipe. In this letter is reported experiments where a low frequency, oscillating flow with velocity magnitudes of the same order as the air flow has been added. Depending on the oscillation strength, it might silence the pipe or move the resonances to higher harmonics. It is also shown that a low frequency oscillation by itself might excite a higher frequency acoustic resonance of the pipe.

  16. 49 CFR 230.63 - Smoke box, steam pipes and pressure parts.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Pipes § 230.63 Smoke box, steam pipes and pressure parts. The smoke box, steam pipes and... 49 Transportation 4 2010-10-01 2010-10-01 false Smoke box, steam pipes and pressure parts....

  17. 49 CFR 230.20 - Alteration and repair report for steam locomotive boilers.

    Science.gov (United States)

    2010-10-01

    ... boilers. (a) Alterations. When an alteration is made to a steam locomotive boiler, the steam locomotive... steam locomotive boiler, the steam locomotive owner and/or operator shall file with the FRA Regional... the boiler. Whenever welded or riveted repairs are performed on stayed portions of a steam...

  18. 49 CFR 230.65 - Steam blocking view of engine crew.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Leaks § 230.65 Steam blocking view of engine crew. The steam locomotive owner and/or... 49 Transportation 4 2010-10-01 2010-10-01 false Steam blocking view of engine crew. 230.65...

  19. Thermoelastic steam turbine rotor control based on neural network

    Science.gov (United States)

    Rzadkowski, Romuald; Dominiczak, Krzysztof; Radulski, Wojciech; Szczepanik, R.

    2015-12-01

    Considered here are Nonlinear Auto-Regressive neural networks with eXogenous inputs (NARX) as a mathematical model of a steam turbine rotor for controlling steam turbine stress on-line. In order to obtain neural networks that locate critical stress and temperature points in the steam turbine during transient states, an FE rotor model was built. This model was used to train the neural networks on the basis of steam turbine transient operating data. The training included nonlinearity related to steam turbine expansion, heat exchange and rotor material properties during transients. Simultaneous neural networks are algorithms which can be implemented on PLC controllers. This allows for the application neural networks to control steam turbine stress in industrial power plants.

  20. Integrated Gasification SOFC Plant with a Steam Plant

    DEFF Research Database (Denmark)

    Rokni, Masoud; Pierobon, Leonardo

    2011-01-01

    A hybrid Solid Oxide Fuel Cell (SOFC) and Steam Turbine (ST) plant is integrated with a gasification plant. Wood chips are fed to the gasification plant to produce biogas and then this gas is fed into the anode side of a SOFC cycle to produce electricity and heat. The gases from the SOFC stacks...... enter into a burner to burn the rest of the fuel. The offgases after the burner are now used to generate steam in a Heat Recovery Steam Generator (HRSG). The generated steam is expanded in a ST to produce additional power. Thus a triple hybrid plant based on a gasification plant, a SOFC plant...... and a steam plant is presented and studied. The plant is called as IGSS (Integrated Gasification SOFC Steam plant). Different systems layouts are presented and investigated. Electrical efficiencies up to 56% are achieved which is considerably higher than the conventional integrated gasification combined...

  1. Condensation-Induced Steam Bubble Collapse in a Pipeline

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Steam bubbles often occur in pipelines due to the pipeline structure or operational errors. The water hammer force induced by the steam bubble collapse is a hidden safety concern. This paper experimentally and numerically investigates the conditions for steam bubble formation and collapse. A series of video pictures taken in the laboratory show that steam bubbles form and collapse over several cycles. The pressure history of the steam bubbles is measured in conjunction with the pictures. In the experiment, the liquid column cavitated at the low pressures and then the cavities collapsed due to condensation causing high pressure pulses. The process was also simulated numerically. The results suggest that coolant pipeline design and operation must include procedures to avoid steam bubble formation.

  2. Acoustically Induced Vibration of Structures: Reverberant Vs. Direct Acoustic Testing

    Science.gov (United States)

    Kolaini, Ali R.; O'Connell, Michael R.; Tsoi, Wan B.

    2009-01-01

    Large reverberant chambers have been used for several decades in the aerospace industry to test larger structures such as solar arrays and reflectors to qualify and to detect faults in the design and fabrication of spacecraft and satellites. In the past decade some companies have begun using direct near field acoustic testing, employing speakers, for qualifying larger structures. A limited test data set obtained from recent acoustic tests of the same hardware exposed to both direct and reverberant acoustic field testing has indicated some differences in the resulting structural responses. In reverberant acoustic testing, higher vibration responses were observed at lower frequencies when compared with the direct acoustic testing. In the case of direct near field acoustic testing higher vibration responses appeared to occur at higher frequencies as well. In reverberant chamber testing and direct acoustic testing, standing acoustic modes of the reverberant chamber or the speakers and spacecraft parallel surfaces can strongly couple with the fundamental structural modes of the test hardware. In this paper data from recent acoustic testing of flight hardware, that yielded evidence of acoustic standing wave coupling with structural responses, are discussed in some detail. Convincing evidence of the acoustic standing wave/structural coupling phenomenon will be discussed, citing observations from acoustic testing of a simple aluminum plate. The implications of such acoustic coupling to testing of sensitive flight hardware will be discussed. The results discussed in this paper reveal issues with over or under testing of flight hardware that could pose unanticipated structural and flight qualification issues. Therefore, it is of paramount importance to understand the structural modal coupling with standing acoustic waves that has been observed in both methods of acoustic testing. This study will assist the community to choose an appropriate testing method and test setup in

  3. A Novel Method for Measuring the Coarse Water Droplets in Wet Steam Flow in Steam Turbines

    Institute of Scientific and Technical Information of China (English)

    Xiaoshu Cai; Lili Wang; Yongzhi Pan; Xin Ouyan; Jianqi Shen

    2001-01-01

    Some optical probes based on light extinction have been developed to measure wemess dominated with fine droplets in steam turbine. However, coarse water droplets (hereafter referred to as CWD) that are the main cause of erosion of blade and of wetness loss of steam turbine can't be detected by the extinction probes because of its large size. In this paper, a new method - the light fluctuation method is presented that is capable of measuring the size of CWD. A new probe based on this method was developed for measuring the size of CWD as well as its velocity and concentration.

  4. Steam thermolysis of tire shreds: modernization in afterburning of accompanying gas with waste steam

    Science.gov (United States)

    Kalitko, V. A.

    2010-03-01

    On the basis of experience in the commercial operation of tire-shred steam thermolysis in EnresTec Inc. (Taiwan) producing high-grade commercial carbon, liquid pyrolysis fuel, and accompanying fuel gas by this method, we have proposed a number of engineering solutions and calculated-analytical substantiations for modernization and intensification of the process by afterburning the accompanying gas with waste steam condensable in the scrubber of water gas cleaning of afterburning products. The condensate is completely freed of the organic pyrolysis impurities and the necessity of separating it from the liquid fuel, as is the case with the active process, is excluded.

  5. Room Acoustical Fields

    CERN Document Server

    Mechel, Fridolin

    2013-01-01

    This book presents the theory of room acoustical fields and revises the Mirror Source Methods for practical computational use, emphasizing the wave character of acoustical fields.  The presented higher methods include the concepts of “Mirror Point Sources” and “Corner sources which allow for an excellent approximation of complex room geometries and even equipped rooms. In contrast to classical description, this book extends the theory of sound fields describing them by their complex sound pressure and the particle velocity. This approach enables accurate descriptions of interference and absorption phenomena.

  6. Acoustic black holes

    CERN Document Server

    Visser, M

    1999-01-01

    Acoustic propagation in a moving fluid provides a conceptually clean and powerful analogy for understanding black hole physics. As a teaching tool, the analogy is useful for introducing students to both General Relativity and fluid mechanics. As a research tool, the analogy helps clarify what aspects of the physics are kinematics and what aspects are dynamics. In particular, Hawking radiation is a purely kinematical effect, whereas black hole entropy is intrinsically dynamical. Finally, I discuss the fact that with present technology acoustic Hawking radiation is almost experimentally testable.

  7. Els pedagògics sons dels silencis. Enllà del silenci d’Auschwitz Los pedagógicos sonidos de los silencios. Más allá del silencio de Auschwitz The pedagogical sounds of silences. Beyond the silence of Auschwitz

    OpenAIRE

    2009-01-01

    Després del gran silenci d’Auschwitz, en aquest passeig pedagògic descriptiu pels sons dels silencis, ens introduïm en les semàntiques dels silencis, acceptant la seva polisèmia i descrivintne algunes de les accepcions més vinculades a l’àmbit educatiu. S’analitza, d’una banda, la genealogia dels silencis, algunes de les seves claus d’origen, i de l’altra, la teleologia dels silencis, la finalitat, pedagògica o no, dels mateixos. Alhora, partint del silenci com a valor pedagògic en aquesta ed...

  8. A new virus-induced gene silencing vector based on Euphorbia mosaic virus-Yucatan peninsula for NPR1 silencing in Nicotiana benthamiana and Capsicum annuum var. Anaheim.

    Science.gov (United States)

    Villanueva-Alonzo, Hernan J; Us-Camas, Rosa Y; López-Ochoa, Luisa A; Robertson, Dominique; Guerra-Peraza, Orlene; Minero-García, Yereni; Moreno-Valenzuela, Oscar A

    2013-05-01

    Virus-induced gene silencing is based on the sequence-specific degradation of RNA. Here, a gene silencing vector derived from EuMV-YP, named pEuMV-YP:ΔAV1, was used to silence ChlI and NPR1 genes in Nicotiana benthamiana. The silencing of the ChlI transcripts was efficient in the stems, petioles and leaves as reflected in tissue bleaching and reduced transcript levels. The silencing was stable, reaching the flowers and fruits, and was observed throughout the life cycle of the plants. Additionally, the silencing of the NPR1 gene was efficient in both N. benthamiana and Capsicum annuum. After silencing, the plants' viral symptoms increased to levels similar to those seen in wild-type plants. These results suggest that NPR1 plays a role in the compatible interactions of EuMV-YP N. benthamiana and EuMV-C. annum var. anaheim.

  9. Essential role of Drosophila Hdacl in homeotic gene silencing

    Institute of Scientific and Technical Information of China (English)

    Yuh-LongChang; Yu-HueiPeng; I-ChingPan; Der-ShanSun; BalasKing; Der-HwaHuang

    2005-01-01

    Deacetylation of the N-terminal tails of core histones plays a crucial role in gene silencing. Rpd3 and Hdal represent two major types of genes encoding trichostatin A-sensitive histone deacetylases. Although they have been widely found, their cellular and developmental roles remain to be elucidated in metazoa. We show that Drosophila Hdacl, an Rpd3-type gene, interacts cooperatively with Polycomb group repressors in silencing the homeotic genes that are essential for axial patterning of body segments. The biochem-ical copurification and cytological colocalization of HDAC1 and Polycomb group repressors strongly suggest that HDAC1 is a component of the silencing complex for chromatin modification on specific regulatory regions of homeotic genes.

  10. Steam and air plasma gasification of bituminous coal and petrocoke

    OpenAIRE

    Vladimir Messerle; Alexander Ustimenko

    2012-01-01

    This paper presents a numerical analysis and experimental investigation of two very different solid fuels, low-rank bituminous coal of 40 % ash content and petrocoke of 3 % ash content, gasification under steam and air plasma conditions with an aim of producing synthesis gas. Numerical analysis was fulfilled using the software package TERRA for equilibrium computation. Using the results of the numerical simulation, experiments on plasma steam gasification of the petrocoke and air and steam ga...

  11. Steam-Electric Power-Plant-Cooling Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sonnichsen, J.C.; Carlson, H.A.; Charles, P.D.; Jacobson, L.D.; Tadlock, L.A.

    1982-02-01

    The Steam-Electric Power Plant Cooling Handbook provides summary data on steam-electric power plant capacity, generation and number of plants for each cooling means, by Electric Regions, Water Resource Regions and National Electric Reliability Council Areas. Water consumption by once-through cooling, cooling ponds and wet evaporative towers is discussed and a methodology for computation of water consumption is provided for a typical steam-electric plant which uses a wet evaporative tower or cooling pond for cooling.

  12. Condensation pool experiments with steam using DN200 blowdown pipe

    Energy Technology Data Exchange (ETDEWEB)

    Laine, J.; Puustinen, M. [Lappeenranta Univ. of Technology (Finland)

    2005-08-01

    This report summarizes the results of the condensation pool experiments with steam using a DN200 blowdown pipe. Altogether five experiment series, each consisting of several steam blows, were carried out in December 2004 with a scaled-down test facility designed and constructed at Lappeenranta University of Technology. The main purpose of the experiments was to increase the understanding of different phenomena in the condensation pool during steam discharge. (au)

  13. INFLUENCE OF STEAM EXPLOSION ON THECRYSTALLINITY OF CELLULOSE FIBER

    OpenAIRE

    Jacquet, Nicolas; Vanderghem, Caroline; Danthine, Sabine; Blecker, Christophe; Richel, Aurore

    2014-01-01

    The aim of the present study is to compare the effect of different steam explosion treatments on crystallinity properties of a pure bleached cellulose. Steam explosion process is composed of two distinct stages: vapocracking and explosive decompression. The treatment intensities is determined by a severity factor, established by a correlation between temperature process and retention time. The results show that steam explosion treatment has an impact on the crystallinity properties of pure ce...

  14. AUTOMATIC CONTROL SYSTEM OF THE DRUM BOILER SUPERHEATED STEAM TEMPERATURE.

    Directory of Open Access Journals (Sweden)

    Juravliov A.A.

    2006-04-01

    Full Text Available The control system of the temperature of the superheated steam of the drum boiler is examined. Main features of the system are the PI-controller in the external control loop and introduction of the functional component of the error signal of the external control loop with the negative feedback of the error signal between the prescribed value of steam flowrate and the signal of the steam flowrate in the exit of the boiler in the internal control loop.

  15. A combinatorial code for splicing silencing: UAGG and GGGG motifs.

    Directory of Open Access Journals (Sweden)

    Kyoungha Han

    2005-05-01

    Full Text Available Alternative pre-mRNA splicing is widely used to regulate gene expression by tuning the levels of tissue-specific mRNA isoforms. Few regulatory mechanisms are understood at the level of combinatorial control despite numerous sequences, distinct from splice sites, that have been shown to play roles in splicing enhancement or silencing. Here we use molecular approaches to identify a ternary combination of exonic UAGG and 5'-splice-site-proximal GGGG motifs that functions cooperatively to silence the brain-region-specific CI cassette exon (exon 19 of the glutamate NMDA R1 receptor (GRIN1 transcript. Disruption of three components of the motif pattern converted the CI cassette into a constitutive exon, while predominant skipping was conferred when the same components were introduced, de novo, into a heterologous constitutive exon. Predominant exon silencing was directed by the motif pattern in the presence of six competing exonic splicing enhancers, and this effect was retained after systematically repositioning the two exonic UAGGs within the CI cassette. In this system, hnRNP A1 was shown to mediate silencing while hnRNP H antagonized silencing. Genome-wide computational analysis combined with RT-PCR testing showed that a class of skipped human and mouse exons can be identified by searches that preserve the sequence and spatial configuration of the UAGG and GGGG motifs. This analysis suggests that the multi-component silencing code may play an important role in the tissue-specific regulation of the CI cassette exon, and that it may serve more generally as a molecular language to allow for intricate adjustments and the coordination of splicing patterns from different genes.

  16. Telomeric position effect--a third silencing mechanism in eukaryotes.

    Directory of Open Access Journals (Sweden)

    J Greg Doheny

    Full Text Available Eukaryotic chromosomes terminate in telomeres, complex nucleoprotein structures that are required for chromosome integrity that are implicated in cellular senescence and cancer. The chromatin at the telomere is unique with characteristics of both heterochromatin and euchromatin. The end of the chromosome is capped by a structure that protects the end and is required for maintaining proper chromosome length. Immediately proximal to the cap are the telomere associated satellite-like (TAS sequences. Genes inserted into the TAS sequences are silenced indicating the chromatin environment is incompatible with transcription. This silencing phenomenon is called telomeric position effect (TPE. Two other silencing mechanisms have been identified in eukaryotes, suppressors position effect variegation [Su(vars, greater than 30 members] and Polycomb group proteins (PcG, approximately 15 members. We tested a large number of each group for their ability to suppress TPE [Su(TPE]. Our results showed that only three Su(vars and only one PcG member are involved in TPE, suggesting silencing in the TAS sequences occurs via a novel silencing mechanism. Since, prior to this study, only five genes have been identified that are Su(TPEs, we conducted a candidate screen for Su(TPE in Drosophila by testing point mutations in, and deficiencies for, proteins involved in chromatin metabolism. Screening with point mutations identified seven new Su(TPEs and the deficiencies identified 19 regions of the Drosophila genome that harbor suppressor mutations. Chromatin immunoprecipitation experiments on a subset of the new Su(TPEs confirm they act directly on the gene inserted into the telomere. Since the Su(TPEs do not overlap significantly with either PcGs or Su(vars, and the candidates were selected because they are involved generally in chromatin metabolism and act at a wide variety of sites within the genome, we propose that the Su(TPE represent a third, widely used, silencing

  17. Parametric Optimization of Biomass Steam-and-Gas Plant

    Directory of Open Access Journals (Sweden)

    V. Sednin

    2013-01-01

    Full Text Available The paper contains a parametric analysis of the simplest scheme of a steam-and gas plant for the conditions required for biomass burning. It has been shown that application of gas-turbine and steam-and-gas plants can significantly exceed an efficiency of steam-power supply units which are used at the present moment. Optimum thermo-dynamical conditions for application of steam-and gas plants with the purpose to burn biomass require new technological solutions in the field of heat-exchange equipment designs.

  18. Experimental research of heterogeneous nuclei in superheated steam

    Directory of Open Access Journals (Sweden)

    Bartoš Ondřej

    2016-01-01

    Full Text Available A mobile steam expansion chamber has been developed to investigate experimentally homogeneous and heterogeneous nucleation processes in steam, both in the laboratory and at power plants using the steam withdrawn from the steam turbine. The purpose of the device is to provide new insight into the physics of nonequilibrium wet steam formation, which is one of the factors limiting the efficiency and reliability of steam turbines. The expanded steam or a mixture of steam with a non-condensable gas rapidly expands in the expansion chamber. Due to adiabatic cooling, the temperature drops below the dew point of the steam at a given pressure. When reaching a sufficiently high supersaturation, droplets are nucleated. By tuning the supersaturation in the so-called nucleation pulse, particles of various size ranges can be activated. This fact is used in the present study to measure the aerosol particles present in the air. Homogeneous nucleation was negligible in this case. The experiment demonstrates the functionality of the device, data acquisition system and data evaluation methods.

  19. Experimental research of heterogeneous nuclei in superheated steam

    Science.gov (United States)

    Bartoš, Ondřej; Kolovratník, Michal; Šmíd, Bohuslav; Hrubý, Jan

    2016-03-01

    A mobile steam expansion chamber has been developed to investigate experimentally homogeneous and heterogeneous nucleation processes in steam, both in the laboratory and at power plants using the steam withdrawn from the steam turbine. The purpose of the device is to provide new insight into the physics of nonequilibrium wet steam formation, which is one of the factors limiting the efficiency and reliability of steam turbines. The expanded steam or a mixture of steam with a non-condensable gas rapidly expands in the expansion chamber. Due to adiabatic cooling, the temperature drops below the dew point of the steam at a given pressure. When reaching a sufficiently high supersaturation, droplets are nucleated. By tuning the supersaturation in the so-called nucleation pulse, particles of various size ranges can be activated. This fact is used in the present study to measure the aerosol particles present in the air. Homogeneous nucleation was negligible in this case. The experiment demonstrates the functionality of the device, data acquisition system and data evaluation methods.

  20. Optimal operations and resilient investments in steam networks

    Directory of Open Access Journals (Sweden)

    Stephane Laurent Bungener

    2016-01-01

    Full Text Available Steam is a key energy vector for industrial sites, most commonly used for process heating and cooling, cogeneration of heat and mechanical power, as a motive fluid or for stripping. Steam networks are used to carry steam from producers to consumers and between pressure levels through letdowns and steam turbines. The steam producers (boilers, heat and power cogeneration units, heat exchangers, chemical reactors should be sized to supply the consumers at nominal operating conditions as well as peak demand.This paper firstly proposes an Mixed Integer Linear Programming formulation to optimise the operations of steam networks in normal operating conditions and exceptional demand (when operating reserves fall to zero, through the introduction of load shedding. Optimisation of investments based on operational and investment costs are included in the formulation.Though rare, boiler failures can have a heavy impact of steam network operations and costs, leading to undercapacity and unit shutdowns. A method is therefore proposed to simulate steam network operations when facing boiler failures. Key performance indicators are introduced to quantify the network's resilience.The proposed methods are applied and demonstrated in an industrial case study using industrial data. The results indicate the importance of oversizing key steam producing equipments and the value of industrial symbiosis to increase industrial site resilience.

  1. Solar process steam for a pharmaceutical company in Jordan

    Science.gov (United States)

    Berger, M.; Mokhtar, M.; Zahler, C.; Al-Najami, M. M. R.; Krüger, D.; Hennecke, K.

    2016-05-01

    This paper presents details of the recent installation of a linear Fresnel collector to provide saturated steam for process heat usage through Direct Steam Generation (DSG) for industrial use in the Jordanian pharmaceuticals manufacturing company RAM Pharma, where first solar steam has been provided in March 2015. This commercial DSG project also represents the first solar DSG plant in MENA. During sunshine, the system achieves a solar fraction of 100 %, and the conventional steam boiler is not needed. In the evening the fossil fired backup takes over automatically and replaces the solar collector in operation. Operational experience, details of the control strategy, and measurement data are presented in the paper.

  2. Improvement of steam temperature control in supercritical once thru boilers

    OpenAIRE

    黒石, 卓司; 藤川, 卓爾

    2009-01-01

     New steam temperature control logic for supercritical once thru boilers was developed from the view point of simplicity similar to that of the conventional sub-critical drum type boilers. Water wall outlet steam temperature can be controlled more easily due to larger specific heat capacity of steam than super heater outlet steam temperature. By dividing temperature control into two parts, one at water wall outlet by fuel flow and the other at SH(super heater) outlet by SH spray flow, boiler ...

  3. Status of steam generator tubing integrity at Jaslovske Bohunice NPP

    Energy Technology Data Exchange (ETDEWEB)

    Cepcek, S. [Nuclear Regulatory Authority of the Slovak Republic, Trnava (Slovakia)

    1997-02-01

    Steam generator represents one of the most important component of nuclear power plants. Especially, loss of tubing integrity of steam generators can lead to the primary coolant leak to secondary circuit and in worse cases to the unit shut down or to the PTS events occurrence. Therefore, to ensure the steam generator tubing integrity and the current knowledge about tube degradation propagation and development is of the highest importance. In this paper the present status of steam generator tubing integrity in operated NPP in Slovak Republic is presented.

  4. The emerging world of small silencing RNAs in protozoan parasites.

    Science.gov (United States)

    Atayde, Vanessa D; Tschudi, Christian; Ullu, Elisabetta

    2011-07-01

    A new RNA world has emerged in the past 10 years with the discovery of a plethora of 20- to 30-nucleotide long small RNAs that are involved in various gene silencing mechanisms. These small RNAs have considerably changed our view of the regulation of gene expression in eukaryotic organisms, with a major shift towards epigenetic and post-transcriptional mechanisms. In this article, we focus on the striking diversity of small silencing RNAs that have been identified in several protozoan parasites and their potential biological role.

  5. Friction coefficient measurements of silencers on specialized duct tract

    Directory of Open Access Journals (Sweden)

    Sehnalek Stanislav

    2016-01-01

    Full Text Available This article describes test methods on air duct track in Laboratory of Environmental Engineering. It focuses on measurement of silencer parameter like is pressure loss coeffcient. Firstly, the paper describe the measurement apparatus with description of calculation method by standard ISO 7235 and energy equation. Then the paper presents three ways how to accomplish measurement because such way is not covered by procedure in standard. Then follows the evaluation of results of measurements on three types of silencer designed for HVAC applications. The article is concluded with discussion over measured data with outline for further research.

  6. From Architectural Acoustics to Acoustical Architecture Using Computer Simulation

    DEFF Research Database (Denmark)

    Schmidt, Anne Marie Due; Kirkegaard, Poul Henning

    2005-01-01

    Architectural acoustics design has in the past been based on simple design rules. However, with a growing complexity in architectural acoustics and the emergence of room acoustic simulation programmes with considerable potential, it is now possible to subjectively analyse and evaluate acoustic...... properties prior to the actual construction of a building. With the right tools applied, acoustic design can become an integral part of the architectural design process. The aim of this paper is to investigate the field of application that an acoustic simulation programme can have during an architectural...... acoustic design process and to set up a strategy to develop future programmes. The emphasis is put on the first three out of four phases in the working process of the architect and a case study is carried out in which each phase is represented by typical results ? as exemplified with reference...

  7. Condensation heat transfer of pure steam and steam from gas-steam mixture in tubes of AES-2006 PHRS SG heat exchanger

    Science.gov (United States)

    Balunov, B. F.; Il'in, V. A.; Shcheglov, A. A.; Lychakov, V. D.; Alekseev, S. B.; Kuhtevich, V. O.; Svetlov, S. V.; Sidorov, V. G.

    2017-01-01

    Results of experimental determination of the average heat transfer coefficient upon condensation of pure steam αc and steam from air-steam mixture αas.m in tubes of a large-scale model of the emergency cooling heat exchanger in the system of passive heat removal through steam generators of AES-2006 project at Leningrad II NPP are presented. The model contained 16 parallel tubes with a diameter of 16 × 2 mm and a length of 2.9 m connected to the upper steam distributing and lower condensate gathering horizontal collectors; the distance between their axes was 2.28 m. The tube segments were vertical, horizontal, or inclined. The internal diameter of the collectors was 40 or 60 mm. The model was placed in the lower part of a tank with a height of 6.5 m and a volume of 5.85 m3 filled with boiling water at atmospheric pressure. The experimental parameters were as follows: pressure range 0.43-7.77 MPa, condensate Reynolds number Ref = (0.87-9.3) × 103, and average air volume fraction at the segment with air-steam mixture 0.18-0.85. The studies showed that nonuniformity of static pressure distribution along the steam-distributing collector strongly influences the reduction of αc value (ejecting effect). The agreement between experimental and calculated according to statutory guidelines values of αc for vertical tubes is achieved if the dynamic head of the steam flow at the input of the steam-distributing collector does not exceed 1 kPa. Equations for calculation of the diffusion heat transfer coefficient at steam condensation from the air-steam mixture αas.m on the internal tube surface are proposed. In the considered conditions, air is completely displaced by steam flow from the upper to the lower part of the tubes. The boundary between these regions is characterized by an average reduced steam velocity through this cross section of 1.6 ± 0.4 m/s. Above the boundary cross section, it is recommended to calculate αc. according to [1].

  8. Removal of NAPLs from the unsaturated zone using steam: prevention of downward migration by injecting mixtures of steam and air

    DEFF Research Database (Denmark)

    Schmidt, R.; Gudbjerg, Jacob; Sonnenborg, Torben Obel

    2002-01-01

    Steam injection for remediation of porous media contaminated by nonaqueous phase liquids has been shown to be a potentially efficient technology. There is, however, concern that the technique may lead to downward migration of separate phase contaminant. In this work, a modification of the steam i......, three mechanisms were identified and it was demonstrated how the effectiveness of these mechanisms depended on the air-to-steam mixing ratio. D 2002 Elsevier Science B.V. All rights reserved....

  9. Evoked acoustic emission

    DEFF Research Database (Denmark)

    Elberling, C; Parbo, J; Johnsen, N J;

    1985-01-01

    Stimulated acoustic emissions were recorded in response to tonal stimuli at 60 dB p.e. SPL in a small group of normal-hearing adults. Power spectral analysis reveals that the evoked activity from each ear contains energy in preferential frequency bands and the change of stimulus frequency has onl...

  10. Evoked acoustic emission

    DEFF Research Database (Denmark)

    Elberling, C; Parbo, J; Johnsen, N J;

    1985-01-01

    Stimulated acoustic emissions were recorded in response to tonal stimuli at 60 dB p.e. SPL in a small group of normal-hearing adults. Power spectral analysis reveals that the evoked activity from each ear contains energy in preferential frequency bands and the change of stimulus frequency has only...

  11. Indigenous Acoustic Detection.

    Science.gov (United States)

    1982-01-26

    considerable distances, and they act as good sensors of human presence. Though singing insects are ubiquitous in warm areas, even in the desert ( Nevo and...methodology. DTIC. CD-58-PL. Lloyd, J. E. 1981. Personnel communication. Nevo , E. and S. A. Blondheim. 1972. Acoustic isolation in the speciation of

  12. Deep Water Ocean Acoustics

    Science.gov (United States)

    2015-04-15

    sound speed profile is range-independent; since there is little expectation there will be significant mesoscale phenomenon given the lack of solar ...34 Journal of the Acoustical Society of America 93 (4), 1736-1742 (1993). 2 Chris H. Harrison and Martin Siderius, "Effective Parameters for Matched

  13. Steam feed and effect of steam-thermal seal in thermolysis of tire shreds in a screw-type reactor

    Science.gov (United States)

    Kalitko, V. A.

    2010-05-01

    On the basis of experience in commercial operation, the effect of steam seal in tire-shred pyrolysis in a screw-type reactor with superheated steam has been considered and analytically substantiated; there, local steam feed produces the above effect at the total reduced pressure and keeps air from entering the reactor without sluices or valves used for hermetization of its loading and unloading. It has been shown that the increase in the production rate of pyrolysis due to the heating by steam amounts to 10-15% and is limited by the diffusion transfer in the reactor’s charge bed.

  14. The condensation of steam from steam-water mixture on water jets at high pressure

    Science.gov (United States)

    Somova, E. V.; Kisina, V. I.; Shvarts, A. L.; Kolbasnikov, A. V.; Kanishchev, V. P.

    2009-01-01

    A physical model for condensation of steam in water flow at high pressure is developed, and analytical dependences for calculating heat transfer are obtained, in particular as applied to the operation of a direct-contact feedwater heater for a new-generation reactor plant with lead coolant.

  15. Doppler method leak detection for LMFBR steam generators. Pt. 1. Experimental results of bubble detection using small models

    Energy Technology Data Exchange (ETDEWEB)

    Kumagai, Hiromichi [Central Research Inst. of Electric Power Industry, Komae, Tokyo (Japan). Komae Research Lab

    1999-05-01

    To prevent the expansion of the tube damage and to maintain structural integrity in the steam generators (SGs) of fast breeder reactors (FBRs), it is necessary to detect precisely and immediately the leakage of water from heat transfer tubes. Therefore, an active acoustic method was developed. Previous studies have revealed that in practical steam generators the active acoustic method can detect bubbles of 10 l/s within 10 seconds. To prevent the expansion of damage to neighboring tubes, it is necessary to detect smaller leakages of water from the heat transfer tubes. The Doppler method is designed to detect small leakages and to find the source of the leak before damage spreads to neighboring tubes. To evaluate the relationship between the detection sensitivity of the Doppler method and the bubble volume and bubble size, the structural shapes and bubble flow conditions were investigated experimentally, using a small structural model. The results show that the Doppler method can detect the bubbles under bubble flow conditions, and it is sensitive enough to detect small leakages within a short time. The doppler method thus has strong potential for the detection of water leakage in SGs. (author)

  16. Holograms for acoustics

    Science.gov (United States)

    Melde, Kai; Mark, Andrew G.; Qiu, Tian; Fischer, Peer

    2016-09-01

    Holographic techniques are fundamental to applications such as volumetric displays, high-density data storage and optical tweezers that require spatial control of intricate optical or acoustic fields within a three-dimensional volume. The basis of holography is spatial storage of the phase and/or amplitude profile of the desired wavefront in a manner that allows that wavefront to be reconstructed by interference when the hologram is illuminated with a suitable coherent source. Modern computer-generated holography skips the process of recording a hologram from a physical scene, and instead calculates the required phase profile before rendering it for reconstruction. In ultrasound applications, the phase profile is typically generated by discrete and independently driven ultrasound sources; however, these can only be used in small numbers, which limits the complexity or degrees of freedom that can be attained in the wavefront. Here we introduce monolithic acoustic holograms, which can reconstruct diffraction-limited acoustic pressure fields and thus arbitrary ultrasound beams. We use rapid fabrication to craft the holograms and achieve reconstruction degrees of freedom two orders of magnitude higher than commercial phased array sources. The technique is inexpensive, appropriate for both transmission and reflection elements, and scales well to higher information content, larger aperture size and higher power. The complex three-dimensional pressure and phase distributions produced by these acoustic holograms allow us to demonstrate new approaches to controlled ultrasonic manipulation of solids in water, and of liquids and solids in air. We expect that acoustic holograms will enable new capabilities in beam-steering and the contactless transfer of power, improve medical imaging, and drive new applications of ultrasound.

  17. Acoustic field modulation in regenerators

    Science.gov (United States)

    Hu, J. Y.; Wang, W.; Luo, E. C.; Chen, Y. Y.

    2016-12-01

    The regenerator is a key component that transfers energy between heat and work. The conversion efficiency is significantly influenced by the acoustic field in the regenerator. Much effort has been spent to quantitatively determine this influence, but few comprehensive experimental verifications have been performed because of difficulties in modulating and measuring the acoustic field. In this paper, a method requiring two compressors is introduced and theoretically investigated that achieves acoustic field modulation in the regenerator. One compressor outputs the acoustic power for the regenerator; the other acts as a phase shifter. A RC load dissipates the acoustic power out of both the regenerator and the latter compressor. The acoustic field can be modulated by adjusting the current in the two compressors and opening the RC load. The acoustic field is measured with pressure sensors instead of flow-field imaging equipment, thereby greatly simplifying the experiment.

  18. Controlling sound with acoustic metamaterials

    DEFF Research Database (Denmark)

    Cummer, Steven A. ; Christensen, Johan; Alù, Andrea

    2016-01-01

    Acoustic metamaterials can manipulate and control sound waves in ways that are not possible in conventional materials. Metamaterials with zero, or even negative, refractive index for sound offer new possibilities for acoustic imaging and for the control of sound at subwavelength scales....... The combination of transformation acoustics theory and highly anisotropic acoustic metamaterials enables precise control over the deformation of sound fields, which can be used, for example, to hide or cloak objects from incident acoustic energy. Active acoustic metamaterials use external control to create......-scale metamaterial structures and converting laboratory experiments into useful devices. In this Review, we outline the designs and properties of materials with unusual acoustic parameters (for example, negative refractive index), discuss examples of extreme manipulation of sound and, finally, provide an overview...

  19. Hydrogen production from biomass over steam gasification

    Energy Technology Data Exchange (ETDEWEB)

    Rauch, R.; Potetz, A.; Hofbauer, H. [Vienna Univ. of Technology (Austria). Inst. of Chemical Engineering; Weber, G. [Bioenergy 2020+, Guessing (Austria)

    2010-12-30

    Renewable hydrogen is one option for a clean energy carrier in the future. There were several research programs in the past, to produce hydrogen on a renewable basis by electrolysis, direct conversion of water or by gasification of biomass. None of these options were developed to a stage, that they could be used on a commercial basis. At the moment almost all hydrogen is produced from fossil fuels and one main consumer of hydrogen are refineries. So a good option to demonstrate the production of renewable hydrogen and bring it later into the market is over refineries. The most economic option to produce renewable hydrogen at the moment is over gasification of biomass. In Austria an indirect gasification system was developed and is demonstrated in Guessing, Austria. The biomass CHP Guessing uses the allothermal steam dual fluidised bed gasifier and produces a high grade product gas, which is used at the moment for the CHP in a gas engine. As there is no nitrogen in the product gas and high hydrogen content, this gas can be also used as synthesis gas or for production of hydrogen. The main aim of this paper is to present the experimental and simulation work to convert biomass into renewable hydrogen. The product gas of the indirect gasification system is mainly hydrogen, carbon monoxide, carbon dioxide and methane. Within the ERA-Net project ''OptiBtLGas'' the reforming of methane and the CO-shift reaction was investigated to convert all hydrocarbons and carbon monoxide to hydrogen. On basis of the experimental results the mass- and energy balances of a commercial 100 MW fuel input plant was done. Here 3 different cases of complexity of the overall plant were simulated. The first case was without reforming and CO-shift, only by hydrogen separation. The second case was by including steam - reforming and afterwards separation of hydrogen. The third case includes hydrocarbon reforming, CO-shift and hydrogen separation. In all cases the off-gases (CO

  20. Wankel engines as steam expanders: design considerations

    Energy Technology Data Exchange (ETDEWEB)

    Badr, O.; Naik, S.; O' Callaghan, P.W.; Probert, S.D. (Cranfield Inst. of Tech., Bedford (GB). Dept. of Applied Energy)

    1991-01-01

    Rotary Wankel engines offer several advantages compared with turbines and other positive-displacement machines as the expansion devices in low-power-output Rankine-cycle systems. So a Wankel expander was selected as the most appropriate device for a steam Rankine-engine, operating principally as a mini combined heat-and-power unit, providing a mechanical output of 5-20 kW. A computer-aided-design technique for selecting the optimal geometry and location of the ports of the expander is described: the computer programs are available from the authors. Lubrication and possible material combinations are also discussed. (author).

  1. Lifetime Assessment of a Steam Pipeline

    Directory of Open Access Journals (Sweden)

    Jiří Janovec

    2012-01-01

    Full Text Available The aim of this paper is to design a method for assessing the life of steam pipes for Czech power plants. The most widely-used material in Czech power plants is steel 15 128. Our findings may also be applied for international equivalents of this steel. The paper shows the classification of cavitation damage and microstructure classification status, based on the German VGB Act, with references to EPRI law in the USA. Calculations of remaining life on the basis of Russian experience are also shown. The possibility of applying this method to increase the operating parameters for power plants is discussed.

  2. Lifetime Assessment of a Steam Pipeline

    OpenAIRE

    Jiří Janovec; Daniela Poláchová; Michal Junek

    2012-01-01

    The aim of this paper is to design a method for assessing the life of steam pipes for Czech power plants. The most widely-used material in Czech power plants is steel 15 128. Our findings may also be applied for international equivalents of this steel. The paper shows the classification of cavitation damage and microstructure classification status, based on the German VGB Act, with references to EPRI law in the USA. Calculations of remaining life on the basis of Russian experience are also sh...

  3. Duplex tube steam reformer development program

    Energy Technology Data Exchange (ETDEWEB)

    Lewe, C K; Nieto, J M; Papadopoulos, A

    1978-09-01

    Work done in partial fulfillment of Task 7 of the Duplex Steam Reformer Development Program is described. The DSR concept acts as a double barrier between a process heat high temperature reactor plant (PNP) and a closed loop chemical heat pipe (CHP) for the long distance transport of chemical energy to a remote industrial user. The current state of the DSR design is described as well as related systems and equipment. The PNP concept presented is based upon work currently underway in the Federal Republic of Germany.

  4. The Voice of Silence in Communication-from cross-culture perspective

    Institute of Scientific and Technical Information of China (English)

    曹琪雯

    2014-01-01

    This paper makes a study of silence from cross-culture perspective and holds that silence is an indispensable compo-nent of human communication without which the proper decoding of the information would be impossible.

  5. Identification of Pns6, a putative movement protein of RRSV, as a silencing suppressor

    Directory of Open Access Journals (Sweden)

    Lin Qiying

    2010-11-01

    Full Text Available Abstract RNA silencing is a potent antiviral response in plants. As a counterdefense, most plant and some animal viruses encode RNA silencing suppressors. In this study, we showed that Pns6, a putative movement protein of Rice ragged stunt virus (RRSV, exhibited silencing suppressor activity in coinfiltration assays with the reporter green fluorescent protein (GFP in transgenic Nicotiana benthamiana line 16c. Pns6 of RRSV suppressed local silencing induced by sense RNA but had no effect on that induced by dsRNA. Deletion of a region involved in RNA binding abolished the silencing suppressor activity of Pns6. Further, expression of Pns6 enhanced Potato virus × pathogenicity in N. benthamiana. Collectively, these results suggested that RRSV Pns6 functions as a virus suppressor of RNA silencing that targets an upstream step of the dsRNA formation in the RNA silencing pathway. This is the first silencing suppressor to be identified from the genus Oryzavirus.

  6. The Research on the Silence Phenomena of Students in College English Classroom Teaching

    Institute of Scientific and Technical Information of China (English)

    杨六兰

    2015-01-01

    This paper analyzes the reasons that resulted in silence phenomena in college English classroom teaching,and gives some feasible suggestions to break the classroom silence in English classroom teaching.

  7. Development of Steam Turbine Inlet Control Valve for Supercritical Pressure at Siemens Industrial Turbomachinery AB

    OpenAIRE

    Sors, Felix; Holm, Patrik

    2010-01-01

    The development in the steam turbine business is heading for applications with much higher steam parameters since this enables a raised efficiency. Steam parameters refer to the pressure and the temperature of the steam. The aim of this study was to generate concepts for steam turbine inlet control valves designed for higher pressure and temperature in comparison with the present design. Future steam power plants using solar energy, based on tower technology, request this kind of performance ...

  8. The "motion silencing" illusion results from global motion and crowding.

    Science.gov (United States)

    Turi, Marco; Burr, David

    2013-04-18

    Suchow and Alvarez (2011) recently devised a striking illusion, where objects changing in color, luminance, size, or shape appear to stop changing when they move. They refer to the illusion as "motion silencing of awareness to visual change." Here we present evidence that the illusion results from two perceptual processes: global motion and crowding. We adapted Suchow and Alvarez's stimulus to three concentric rings of dots, a central ring of "target dots" flanked on either side by similarly moving flanker dots. Subjects had to identify in which of two presentations the target dots were continuously changing (sinusoidally) in size, as distinct from the other interval in which size was constant. The results show: (a) Motion silencing depends on target speed, with a threshold around 0.2 rotations per second (corresponding to about 10°/s linear motion). (b) Silencing depends on both target-flanker spacing and eccentricity, with critical spacing about half eccentricity, consistent with Bouma's law. (c) The critical spacing was independent of stimulus size, again consistent with Bouma's law. (d) Critical spacing depended strongly on contrast polarity. All results imply that the "motion silencing" illusion may result from crowding.

  9. Silencing by small RNAs is linked to endosomal trafficking.

    Science.gov (United States)

    Lee, Young Sik; Pressman, Sigal; Andress, Arlise P; Kim, Kevin; White, Jamie L; Cassidy, Justin J; Li, Xin; Lubell, Kim; Lim, Do Hwan; Cho, Ik Sang; Nakahara, Kenji; Preall, Jonathan B; Bellare, Priya; Sontheimer, Erik J; Carthew, Richard W

    2009-09-01

    Small RNAs direct RNA-induced silencing complexes (RISCs) to regulate stability and translation of mRNAs. RISCs associated with target mRNAs often accumulate in discrete cytoplasmic foci known as GW-bodies. However, RISC proteins can associate with membrane compartments such as the Golgi and endoplasmic reticulum. Here, we show that GW-bodies are associated with late endosomes (multivesicular bodies, MVBs). Blocking the maturation of MVBs into lysosomes by loss of the tethering factor HPS4 (ref. 5) enhances short interfering RNA (siRNA)- and micro RNA (miRNA)-mediated silencing in Drosophila melanogaster and humans. It also triggers over-accumulation of GW-bodies. Blocking MVB formation by ESCRT (endosomal sorting complex required for transport) depletion results in impaired miRNA silencing and loss of GW-bodies. These results indicate that active RISCs are physically and functionally coupled to MVBs. We further show that MVBs promote the competence of RISCs in loading small RNAs. We suggest that the recycling of RISCs is promoted by MVBs, resulting in RISCs more effectively engaging with small RNA effectors and possibly target RNAs. It may provide a means to enhance the dynamics of RNA silencing in the cytoplasm.

  10. The effects of thinking in silence on creativity and innovation

    NARCIS (Netherlands)

    de Vet, A.J.

    2007-01-01

    This dissertation consists of three empirical studies on the effects of thinking in silence on creativity and innovation. In these studies I use a social psychology and cognitive psychology lens to study creativity and innovation at the individual and at the team level of analysis, using randomized

  11. Gold Nanobeacons for Tracking Gene Silencing in Zebrafish

    Directory of Open Access Journals (Sweden)

    Milton Cordeiro

    2017-01-01

    Full Text Available The use of gold nanoparticles for effective gene silencing has demonstrated its potential as a tool for gene expression experiments and for the treatment of several diseases. Here, we used a gold nanobeacon designed to specifically silence the enhanced green fluorescence protein (EGFP mRNA in embryos of a fli-EGFP transgenic zebrafish line, while simultaneously allowing the tracking and localization of the silencing events via the beacon’s emission. Fluorescence imaging measurements demonstrated a decrease of the EGFP emission with a concomitant increase in the fluorescence of the Au-nanobeacon. Furthermore, microinjection of the Au-nanobeacon led to a negligible difference in mortality and malformations in comparison to the free oligonucleotide, indicating that this system is a biocompatible platform for the administration of gene silencing moieties. Together, these data illustrate the potential of Au-nanobeacons as tools for in vivo zebrafish gene modulation with low toxicity which may be used towards any gene of interest.

  12. Design curves for circular and annular duct silencers

    Science.gov (United States)

    Watson, Willie R.; Ramakrishnan, R.

    1989-01-01

    Conventional models of sound propagation between porous walls (Scott, 1946) are adapted in order to calculate design curves for the lined circular and annular-duct silencers used in HVAC systems. The derivation of the governing equations is outlined, and results for two typical cases are presented graphically. Good agreement with published experimental data is demonstrated.

  13. Marie Nimier, au cœur du silence

    Directory of Open Access Journals (Sweden)

    Joëlle Papillon

    2012-01-01

    Full Text Available Dans La Reine du silence, Marie Nimier se confronte à la figure de son père, l’écrivain Roger Nimier, mort lorsqu’elle avait cinq ans. Elle y montre le poids qui pèse sur l’enfant d’écrivain, mais aussi celui de l’héritage du secret familial et de l’injonction au silence. La difficulté de l’élaboration de son récit de filiation se révèle dans les constants recommencements et reformulations, qui constituent la marque de la tension angoissante entre l’obligation de dire et celle de taire. In La Reine du silence, Marie Nimier confronts her father’s memory – the writer Roger Nimier, who died when she was five years old. The novel describes the burden of being a writer’s child, along with that of inheriting family secrets and submitting to a code of silence. The difficulty of recounting her relationship with her late father is evidenced by the narrator’s numerous “false starts” and her constant rewritings. The hesitant nature of the narration captures an anguish born of two irreconcilable obligations : the need to put things into words and the pressure to remain silent.

  14. Relationship between Organizational Mobbing and Silence Behavior among Teachers

    Science.gov (United States)

    Hüsrevsahi, Selda Polat

    2015-01-01

    This study mainly aims to investigate the correlation between teachers' exposure to mobbing in their workplaces and their display of the act of silence. This study is based on a survey design where data from 312 teachers were collected and analyzed using correlation and regression analyses. Specifically, "The Structure and Dimensions of…

  15. Tacit Authorization : A Legal Solution for Administrative Silence

    NARCIS (Netherlands)

    Hoogstra, Nicole; de Graaf, K.J.

    2016-01-01

    This article discusses one of the current legal instruments to stimulate timely decision-making by administrative authorities, namely the ‘Lex silencio positivo’ or the ‘Silence is Consent’ rule. Tacit authorization prescribes that the license sought by the applicant will be granted automatically if

  16. Studies of the silencing of Baculovirus DNA binding protein

    NARCIS (Netherlands)

    Quadt, I.; Lent, van J.W.M.; Knebel-Morsdorf, D.

    2007-01-01

    Baculovirus DNA binding protein (DBP) binds preferentially single-stranded DNA in vitro and colocalizes with viral DNA replication sites. Here, its putative role as viral replication factor has been addressed by RNA interference. Silencing of DBP in Autographa californica multiple nucleopolyhedrovir

  17. Strain Specific Factors Control Effector Gene Silencing in Phytophthora sojae.

    Directory of Open Access Journals (Sweden)

    Sirjana Devi Shrestha

    Full Text Available The Phytophthora sojae avirulence gene Avr3a encodes an effector that is capable of triggering immunity on soybean plants carrying the resistance gene Rps3a. P. sojae strains that express Avr3a are avirulent to Rps3a plants, while strains that do not are virulent. To study the inheritance of Avr3a expression and virulence towards Rps3a, genetic crosses and self-fertilizations were performed. A cross between P. sojae strains ACR10 X P7076 causes transgenerational gene silencing of Avr3a allele, and this effect is meiotically stable up to the F5 generation. However, test-crosses of F1 progeny (ACR10 X P7076 with strain P6497 result in the release of silencing of Avr3a. Expression of Avr3a in the progeny is variable and correlates with the phenotypic penetrance of the avirulence trait. The F1 progeny from a direct cross of P6497 X ACR10 segregate for inheritance for Avr3a expression, a result that could not be explained by parental imprinting or heterozygosity. Analysis of small RNA arising from the Avr3a gene sequence in the parental strains and hybrid progeny suggests that the presence of small RNA is necessary but not sufficient for gene silencing. Overall, we conclude that inheritance of the Avr3a gene silenced phenotype relies on factors that are variable among P. sojae strains.

  18. Strain Specific Factors Control Effector Gene Silencing in Phytophthora sojae.

    Science.gov (United States)

    Shrestha, Sirjana Devi; Chapman, Patrick; Zhang, Yun; Gijzen, Mark

    2016-01-01

    The Phytophthora sojae avirulence gene Avr3a encodes an effector that is capable of triggering immunity on soybean plants carrying the resistance gene Rps3a. P. sojae strains that express Avr3a are avirulent to Rps3a plants, while strains that do not are virulent. To study the inheritance of Avr3a expression and virulence towards Rps3a, genetic crosses and self-fertilizations were performed. A cross between P. sojae strains ACR10 X P7076 causes transgenerational gene silencing of Avr3a allele, and this effect is meiotically stable up to the F5 generation. However, test-crosses of F1 progeny (ACR10 X P7076) with strain P6497 result in the release of silencing of Avr3a. Expression of Avr3a in the progeny is variable and correlates with the phenotypic penetrance of the avirulence trait. The F1 progeny from a direct cross of P6497 X ACR10 segregate for inheritance for Avr3a expression, a result that could not be explained by parental imprinting or heterozygosity. Analysis of small RNA arising from the Avr3a gene sequence in the parental strains and hybrid progeny suggests that the presence of small RNA is necessary but not sufficient for gene silencing. Overall, we conclude that inheritance of the Avr3a gene silenced phenotype relies on factors that are variable among P. sojae strains.

  19. MGMT gene silencing and benefit from temozolomide in glioblastoma

    NARCIS (Netherlands)

    Hegi, ME; Diserens, A; Gorlia, T; Hamou, M; de Tribolet, N; Weller, M; Kros, JM; Hainfellner, JA; Mason, W; Mariani, L; Bromberg, JEC; Hau, P; Mirimanoff, RO; Cairncross, JG; Janzer, RC; Stupp, R

    2005-01-01

    BACKGROUND: Epigenetic silencing of the MGMT (O(sup 6)-methylguanine-DNA methyltransferase) DNA-repair gene by promoter methylation compromises DNA repair and has been associated with longer survival in patients with glioblastoma who receive alkylating agents. METHODS: We tested the relationship bet

  20. Viral RNA Silencing Suppression: The Enigma of Bunyavirus NSs Proteins

    Directory of Open Access Journals (Sweden)

    Marcio Hedil

    2016-07-01

    Full Text Available The Bunyaviridae is a family of arboviruses including both plant- and vertebrate-infecting representatives. The Tospovirus genus accommodates plant-infecting bunyaviruses, which not only replicate in their plant host, but also in their insect thrips vector during persistent propagative transmission. For this reason, they are generally assumed to encounter antiviral RNA silencing in plants and insects. Here we present an overview on how tospovirus nonstructural NSs protein counteracts antiviral RNA silencing in plants and what is known so far in insects. Like tospoviruses, members of the related vertebrate-infecting bunyaviruses classified in the genera Orthobunyavirus, Hantavirus and Phlebovirus also code for a NSs protein. However, for none of them RNA silencing suppressor activity has been unambiguously demonstrated in neither vertebrate host nor arthropod vector. The second part of this review will briefly describe the role of these NSs proteins in modulation of innate immune responses in mammals and elaborate on a hypothetical scenario to explain if and how NSs proteins from vertebrate-infecting bunyaviruses affect RNA silencing. If so, why this discovery has been hampered so far.

  1. Mobile gene silencing in Arabidopsis is regulated by hydrogen peroxide

    Directory of Open Access Journals (Sweden)

    Dacheng Liang

    2014-12-01

    Full Text Available In plants and nematodes, RNAi can spread from cells from which it is initiated to other cells in the organism. The underlying mechanism controlling the mobility of RNAi signals is not known, especially in the case of plants. A genetic screen designed to recover plants impaired in the movement but not the production or effectiveness of the RNAi signal identified RCI3, which encodes a hydrogen peroxide (H2O2-producing type III peroxidase, as a key regulator of silencing mobility in Arabidopsis thaliana. Silencing initiated in the roots of rci3 plants failed to spread into leaf tissue or floral tissue. Application of exogenous H2O2 reinstated the spread in rci3 plants and accelerated it in wild-type plants. The addition of catalase or MnO2, which breaks down H2O2, slowed the spread of silencing in wild-type plants. We propose that endogenous H2O2, under the control of peroxidases, regulates the spread of gene silencing by altering plasmodesmata permeability through remodelling of local cell wall structure, and may play a role in regulating systemic viral defence.

  2. Organizational Justice As a Predictor of Organizational Silence

    Science.gov (United States)

    Tan, Çetin

    2014-01-01

    In this study, relation between teachers' perception for organizational justice and their organizational silence was examined. Sample of this study consists of 300 teachers who work at elementary schools in Siirt. Relational Scanning model was utilized in performance of this study. In this study, Organizational Justice Scale and Organizational…

  3. Maternal Silences: Motherhood and Voluntary Childlessness in Contemporary Christianity

    Directory of Open Access Journals (Sweden)

    Dawn Llewellyn

    2016-06-01

    Full Text Available In Christianity, there is an ideology of motherhood that pervades scripture, ritual, and doctrine, yet there is an academic silence that means relatively little space has been given to motherhood and mothering, and even less to voluntary childlessness, from a faith perspective. By drawing on qualitative in-depth interviews with Christian women living in Britain, narrating their experiences of motherhood and voluntary childlessness, I suggest there are also lived maternal silences encountered by women in contemporary Christianity. There is a maternal expectation produced through church teaching, liturgy and culture that constructs women as ‘maternal bodies’ (Gatrell 2008; this silences and marginalises women from articulating their complex relationship with religion, motherhood, and childlessness in ways that challenge their spiritual development. However, this article also introduces the everyday and intentional tactics women employ to disrupt the maternal expectation, and hereby interrupt the maternal silence.

  4. Breaking Classroom Silences: A View from Linguistic Ethnography

    Science.gov (United States)

    Rampton, Ben; Charalambous, Constadina

    2016-01-01

    This paper addresses potentially problematic classroom episodes in which someone foregrounds a social division that is normally taken for granted. It illustrates the way in which linguistic ethnography can unpack the layered processes that collide in the breaking of silence, showing how linguistic form and practice, individual positioning, local…

  5. Progressive silencing of p14ARF in oesophageal adenocarcinoma.

    Science.gov (United States)

    Huang, Yinghui; Peters, Christopher J; Fitzgerald, Rebecca C; Gjerset, Ruth A

    2009-02-01

    The frequency of oesophageal adenocarcinoma is increasing in Western countries for unknown reasons, and correlates with a corresponding increase in the pre-malignant condition, Barrett's Oesophagus, which raises the risk of adenocarcinoma by some 40- to 125-fold. We have examined how disease progression correlates with changes in expression of the p14ARF (ARF) tumour suppressor, a key regulator of the p53 tumour suppressor pathway that is silenced in some 30% of cancers overall, but for which a role in oesophageal cancer is unclear. We have used quantitative PCR, RT-PCR, methylation-specific PCR and chromatin-immunoprecipitation to examine the regulation and function of ARF in oesophageal adenocarcinoma tissue specimens and cell lines. We find highly significant reductions (Poesophageal epithelium to Barrett's Oesophagus to adenocarcinoma, with 57/76 (75%) adenocarcinomas displaying undetectable levels of ARF expression. Retention of ARF expression in adenocarcinoma is a highly significant indicator of increased survival (Padenocarcinoma cell lines and can be reversed by 5-aza-2'-deoxycytidine. The results suggest that silencing of ARF is involved in the pathogenesis of oesophageal adenocarcinoma and show that either DNA or histone methylation can provide the primary mechanism for ARF gene silencing. Silencing of ARF could provide a useful marker for increased risk of progression and poor prognosis.

  6. Optimalisation of the process for manually operated jacket steam sterilisers

    NARCIS (Netherlands)

    Muis B; Bruijn ACP de; Drongelen AW van; Huys JFFM; LGM

    2001-01-01

    The aim of the research was to find an optimal process for a manually operated jacketed steam steriliser, which is mainly used in developing countries. The experiments were focussed on the steam penetration into a textile test pack and the drying procedure. The performance of the various test cycles

  7. Modelling of a Coil Steam Generator for CSP applications

    DEFF Research Database (Denmark)

    Pelagotti, Leonardo; Sørensen, Kim; Condra, Thomas Joseph;

    2014-01-01

    The project investigates a new design for a CSP plant steam generation system, the Coil Steam Generator (CSG). This system allows faster start-ups and therefore higher daily energy production from the Sun. An analytical thermodynamic simulation model of the evaporator and a mechanical analysis...

  8. Teachers' Perceptions and Practices of STEAM Education in South Korea

    Science.gov (United States)

    Park, HyunJu; Byun, Soo-yong; Sim, Jaeho; Han, Hyesook; Baek, Yoon Su

    2016-01-01

    This study examined teachers' perceptions and practices of science, technology, engineering, arts, and mathematics (STEAM) education in South Korea, drawing on a survey of teachers in STEAM model schools. Results showed that the majority of Korean teachers, especially experienced teachers and male teachers, had a positive view on the role of STEAM…

  9. Study on Technology Solutions of CEFR Steam Generator

    Institute of Scientific and Technical Information of China (English)

    WU; Zhi-guang; YU; Hua-jin; LIAO; Zi-yu; ZHANG; Zhen-xing

    2012-01-01

    <正>The technology solutions of CFR1000 steam generator were researched which were compared and analyze with foreign fast reactor steam generator technology solutions. The comparative analysis included the integral/modular structure, the number of modules per loop, structure types, the

  10. Maximal oil recovery by simultaneous condensation of alkane and steam

    NARCIS (Netherlands)

    Bruining, J.; Marchesin, D.

    2007-01-01

    This paper deals with the application of steam to enhance the recovery from petroleum reservoirs. We formulate a mathematical and numerical model that simulates coinjection of volatile oil with steam into a porous rock in a one-dimensional setting. We utilize the mathematical theory of conservation

  11. 49 CFR 230.106 - Steam locomotive frame.

    Science.gov (United States)

    2010-10-01

    ... Tenders Trucks, Frames and Equalizing System § 230.106 Steam locomotive frame. (a) Maintenance and inspection. Frames, decks, plates, tailpieces, pedestals, and braces shall be maintained in a safe and... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive frame. 230.106 Section...

  12. Numerical modeling of secondary side thermohydraulics of horizontal steam generator

    Energy Technology Data Exchange (ETDEWEB)

    Melikhov, V.I.; Melikhov, O.I.; Nigmatulin, B.I. [Research and Engineering Centre of LWR Nuclear Plants Safety, Moscow (Russian Federation)

    1995-12-31

    A mathematical model for the transient three-dimensional secondary side thermal hydraulics of the horizontal steam generator has been developed. The calculations of the steam generator PGV-1000 and PGV-4 nominal regimes and comparison of numerical and experimental results have been carried out. 7 refs.

  13. 49 CFR 230.101 - Steam locomotive driving journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Steam locomotive driving journal boxes. 230.101... Locomotives and Tenders Running Gear § 230.101 Steam locomotive driving journal boxes. (a) Driving journal boxes. Driving journal boxes shall be maintained in a safe and suitable condition for service. Not...

  14. Temperature Fluctuation Characteristics Analysis for Steam Generator of Fast Reactor

    Institute of Scientific and Technical Information of China (English)

    ZHU; Li-na; WU; Zhi-guang

    2015-01-01

    In the case of boiling heat transfer deterioration,temperature fluctuating may accelerate the corrosion of heat transfer tubes and can also lead to thermal stress on the tubes.In this paper,dryout-induced temperature fluctuation for the fast reactor steam generator is investigated.The impacts of water flow rate,sodium inlet temperature and the outlet steam

  15. Temporal and spatial Bean pod mottle virus-induced gene silencing in soybean.

    Science.gov (United States)

    Juvale, Parijat S; Hewezi, Tarek; Zhang, Chunquan; Kandoth, Pramod Kaitheri; Mitchum, Melissa G; Hill, John H; Whitham, Steven A; Baum, Thomas J

    2012-12-01

    Virus-induced gene silencing (VIGS) is a powerful reverse genetics tool in plant science. In this study, we investigated the temporal and spatial silencing patterns achieved by Bean pod mottle virus (BPMV)-based VIGS in soybean using virus constructs targeting green fluorescence protein (GFP). Silencing GFP enabled an in-depth analysis of silencing in soybean tissues over time in a transgenic line constitutively expressing GFP. We discovered evidence for variable GFP silencing based on insert orientation and targeted region in the coding sequence. A 3' sequence in reverse orientation produced the strongest silencing phenotypes. Furthermore, we documented that BPMV VIGS can achieve widespread silencing in a broad range of tissues, including leaves, stems, flowers and roots. Near-complete silencing was attained in leaves and flowers. Although weaker than in shoots, the observed gene silencing in soybean roots will also allow reverse genetics studies in this tissue. When GFP fluorescence was assayed in cross-sections of stems and leaf petioles, near-complete and uniform silencing was observed in all cell types. Silencing was observed from as early as 2 weeks post-virus inoculation in leaves to 7 weeks post-virus inoculation in flowers, suggesting that this system can induce and maintain silencing for significant durations.

  16. One-hybrid screens at the Saccharomyces cerevisiae HMR locus identify novel transcriptional silencing factors.

    Science.gov (United States)

    Andrulis, Erik D; Zappulla, David C; Alexieva-Botcheva, Krassimira; Evangelista, Carlos; Sternglanz, Rolf

    2004-01-01

    In Saccharomyces cerevisiae, genes located at the telomeres and the HM loci are subject to transcriptional silencing. Here, we report results of screening a Gal4 DNA-binding domain hybrid library for proteins that cause silencing when targeted to a silencer-defective HMR locus. PMID:15020450

  17. Full STEAM Ahead: From Earth to Ploonoids

    Science.gov (United States)

    Runyon, C. R.; Hall, C.; Blackman, C. L.; Royle, M.; Williams, M. N.

    2015-12-01

    What the heck is a plunoid, you ask? The NASA Solar System Exploration Research Virtual Institute's Education/Public Engagement (EPE) program,from two SSERVI teams (SEEED at Brown/MIT and CLASS at University of Central Florida), is moving full STEAM ahead, engaging the public in the exciting discoveries being made around small bodies, including PLanetary mOONs and asterOIDS (i.e ploonoids). The team has incorporated the arts, from visual representations, storytelling, and music into every facet of the program, to stimulate an affective and personal connection to the content. This past year, the SSERVI STEAM team has participated in numerous public science events, including International Observe the Moon Night, two Astronomy Nights at a local baseball venue, Dark Skies at the US and Canadian National Parks, and Space Day at Camp Happy Days, a camp for children with cancer. Through these events, the team reached over 10000 members of the general public, showcasing current NASA SSERVI research, dispelling myths about our landing and exploring the moon, demonstrating the excitement of STEM through hands-on interactive displays, and providing an outlet for creativity by having multiple ways of representing and explaining scientific information through the arts. Join us on our "ed"venture through the solar system ploonoids.

  18. Advanced Eddy current NDE steam generator tubing.

    Energy Technology Data Exchange (ETDEWEB)

    Bakhtiari, S.

    1999-03-29

    As part of a multifaceted project on steam generator integrity funded by the U.S. Nuclear Regulatory Commission, Argonne National Laboratory is carrying out research on the reliability of nondestructive evaluation (NDE). A particular area of interest is the impact of advanced eddy current (EC) NDE technology. This paper presents an overview of work that supports this effort in the areas of numerical electromagnetic (EM) modeling, data analysis, signal processing, and visualization of EC inspection results. Finite-element modeling has been utilized to study conventional and emerging EC probe designs. This research is aimed at determining probe responses to flaw morphologies of current interest. Application of signal processing and automated data analysis algorithms has also been addressed. Efforts have focused on assessment of frequency and spatial domain filters and implementation of more effective data analysis and display methods. Data analysis studies have dealt with implementation of linear and nonlinear multivariate models to relate EC inspection parameters to steam generator tubing defect size and structural integrity. Various signal enhancement and visualization schemes are also being evaluated and will serve as integral parts of computer-aided data analysis algorithms. Results from this research will ultimately be substantiated through testing on laboratory-grown and in-service-degraded tubes.

  19. Studies of catalytic coal gasification with steam

    Directory of Open Access Journals (Sweden)

    Porada Stanisław

    2016-09-01

    Full Text Available One of the promising processes, belonging to the so-called clean coal technologies, is catalytic coal gasification. The addition of a catalyst results in an increased process rate, in which synthesis gas is obtained. Therefore, the subject of this research was catalytic gasification of low-ranking coal which, due to a high reactivity, meets the requirements for fuels used in the gasification process. Potassium and calcium cations in an amount of 0.85, 1.7 and 3.4% by weight were used as catalytically active substances. Isothermal measurements were performed at 900°C under a pressure of 2 MPa using steam as a gasifying agent. On the basis of kinetic curves, the performance of main gasification products as well as carbon conversion degree were determined. The performed measurements allowed the determination of the type and amount of catalyst that ensure the most efficient gasification process of the coal ‘Piast’ in an atmosphere of steam.

  20. Kinetics of zeolite dealumination in steam

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, C.D.; Labouriau, A.; Crawford, S.N.; Romero, R.; Quirin, J.; Earl, W.L.

    1998-08-01

    Zeolite dealumination is a well known phenomenon that contributes to the deactivation or activation of catalysts in several different applications. The most obvious effect is in acid catalysis where dealumination under reaction conditions removes the Broensted sites, thus deactivating the catalyst. The authors are interested in the use of cation exchanged zeolites as selective reduction catalysts for removal of NO{sub x} from exhaust streams, particularly from automotive exhaust. In this case, copper exchanged ZSM-5 has been shown to be an effective catalyst for the generic reaction of NO{sub x} with hydrocarbons. However, high temperature and steam in combustion exhaust causes dealumination and consequent migration of copper out of the zeolite structure resulting in rapid deactivation of the catalyst. Dealumination of zeolites has been reported by many authors in uncountable papers and cannot be reviewed here. However, to the authors` knowledge there are no reports on the kinetics of dealumination under varying conditions of temperature and steam. By measuring the kinetics of dealumination with different zeolites and exchange cations they expect to develop working models of the dealumination process that will allow control of zeolite deactivation. This manuscript is a description of the basic techniques used and a progress report on the very beginning of this study.

  1. Repair technology for steam generator tubes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Jung, Hyun Kyu; Jung, Seung Ho; Kim, Chang Hoi; Jung, Young Moo; Seo, Yong Chil; Kim, Jung Su; Seo, Moo Hong

    2001-02-01

    The most commonly used sleeving materials are thermally treated Alloy 600 and thermally treated Alloy 690 Alloy. Currently, thermally treated Alloy 690 and Alloy 800 are being offered although Alloy 800 has not been licensed in the US. To install sleeve, joint strength, leak tightness, PWSCC resistance, evaluation on process parameter range and the effect of equipments and procedures on repair plan and radiation damage have to be investigated before sleeving. ABB CE provides three type of leak tight Alloy 690 TIG welded and PLUSS sleeve. Currently, Direct Tube Repair technique using Nd:YAG laser has been developed by ABB CE and Westinghouse. FTI has brazed and kinetic sleeve designs for recirculating steam generator and hydraulic and rolled sleeve designs for one-through steam generators. Westinghouse provides HEJ, brazed and laser welded sleeve design. When sleeve is installed in order to repair the damaged S/G tubes, it is certain that defects can be occurred due to the plastic induced stress and thermal stress. Therefore it is important to minimize the residual stress. FTI provides the electrosleeve technique as a future repair candidate using electroplating.

  2. Flat acoustic lens by acoustic grating with curled slits

    KAUST Repository

    Peng, Pai

    2014-10-01

    We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry-Perot resonance.

  3. Manipulate acoustic waves by impedance matched acoustic metasurfaces

    Science.gov (United States)

    Wu, Ying; Mei, Jun; Aljahdali, Rasha

    We design a type of acoustic metasurface, which is composed of carefully designed slits in a rigid thin plate. The effective refractive indices of different slits are different but the impedances are kept the same as that of the host medium. Numerical simulations show that such a metasurface can redirect or reflect a normally incident wave at different frequencies, even though it is impedance matched to the host medium. We show that the underlying mechanisms can be understood by using the generalized Snell's law, and a unified analytic model based on mode-coupling theory. We demonstrate some simple realization of such acoustic metasurface with real materials. The principle is also extended to the design of planar acoustic lens which can focus acoustic waves. Manipulate acoustic waves by impedance matched acoustic metasurfaces.

  4. LMFBR steam generator systems development program progress report

    Energy Technology Data Exchange (ETDEWEB)

    None

    The intent of this program is to investigate methods of producing 2-1/4 Cr-1Mo duplex tubing to meet the structural, thermal/hydraulic and leak detection design requirements of the duplex tube leak detection concept for application on the Demonstration Plant and/or prototype steam generator. The leak detection concept as envisioned for LMFBR steam generator application will be analyzed regarding response to credible leak situations. The results of testing will be used for this analysis. The third fluid system will be conceptually designed including the two plena design adaptations being considered and the advantages and disadvantages of each will be assessed. The test program for the single-tube steam generator model will be developed in accordance with the technical and schedular objectives of the LMFBR duplex tube steam generator development program. A conceptual steam generator configuration will be established for use as a reference in the on-going feasibility studies and Demo Plant system development.

  5. Steam reforming of technical bioethanol for hydrogen production

    DEFF Research Database (Denmark)

    Rass-Hansen, Jeppe; Johansson, Roger; Møller, Martin Hulbek;

    2008-01-01

    Essentially all work on ethanol steam reforming so far has been carried out using simulated bioethanol feedstocks, which means pure ethanol mixed with water. However, technical bioethanol consists of a lot of different components including sugars, which cannot be easily vaporized and steam reformed....... For ethanol steam reforming to be of practical interest, it is important to avoid the energy-intensive purification steps to fuel grade ethanol. Therefore, it is imperative to analyze how technical bioethanol, with the relevant impurities, reacts during the steam reforming process. We show how three different...... distillation fractions of technical 2nd generation bioethanol, produced in a pilot plant, influence the performance of nickel- and ruthenium-based catalysts during steam reforming, and we discuss what is required to obtain high activity and long catalyst lifetime. We conclude that the use of technical...

  6. Modelling of Steam Generating Paraboloidal dish Solar Thermal Power System

    Energy Technology Data Exchange (ETDEWEB)

    Siangsukone, P.; Lovegrove, K.

    2006-07-01

    The Australian National University (ANU) has a 400m2 Paraboloidal dish solar concentrator system, informally named the Big Dish that produces superheated steam via a receiver mounted monotube boiler connected to 50kWe steam engine for electricity generation. This paper describes an investigation of the system and its components modelled using the TRNYSYS transient system simulation package. The system was modelled in the context of performance assessment for multiple dishes, central generation Rankine cycle power plants. Five new custom components; paraboloidal dish collector, steam cavity receiver, steam line or feedwater line, steam engine, and pressure drop calculator, were developed for the TRNSYS deck file constructed for this study. Validation tests were performed by comparing with the latest experimental results measured with a 1-minute time step and good agreement, with errors less than 10%, has been found. (Author)

  7. A Martian acoustic anemometer.

    Science.gov (United States)

    Banfield, Don; Schindel, David W; Tarr, Steve; Dissly, Richard W

    2016-08-01

    An acoustic anemometer for use on Mars has been developed. To understand the processes that control the interaction between surface and atmosphere on Mars, not only the mean winds, but also the turbulent boundary layer, the fluxes of momentum, heat and molecular constituents between surface and atmosphere must be measured. Terrestrially this is done with acoustic anemometers, but the low density atmosphere on Mars makes it challenging to adapt such an instrument for use on Mars. This has been achieved using capacitive transducers and pulse compression, and was successfully demonstrated on a stratospheric balloon (simulating the Martian environment) and in a dedicated Mars Wind Tunnel facility. This instrument achieves a measurement accuracy of ∼5 cm/s with an update rate of >20 Hz under Martian conditions.

  8. Acoustic absorption by sunspots

    Science.gov (United States)

    Braun, D. C.; Labonte, B. J.; Duvall, T. L., Jr.

    1987-01-01

    The paper presents the initial results of a series of observations designed to probe the nature of sunspots by detecting their influence on high-degree p-mode oscillations in the surrounding photosphere. The analysis decomposes the observed oscillations into radially propagating waves described by Hankel functions in a cylindrical coordinate system centered on the sunspot. From measurements of the differences in power between waves traveling outward and inward, it is demonstrated that sunspots appear to absorb as much as 50 percent of the incoming acoustic waves. It is found that for all three sunspots observed, the amount of absorption increases linearly with horizontal wavenumber. The effect is present in p-mode oscillations with wavelengths both significantly larger and smaller than the diameter of the sunspot umbrae. Actual absorption of acoustic energy of the magnitude observed may produce measurable decreases in the power and lifetimes of high-degree p-mode oscillations during periods of high solar activity.

  9. ACOUSTIC EMISSION ANALYZER

    Directory of Open Access Journals (Sweden)

    J. J. Almeida-Pérez

    2004-12-01

    Full Text Available In this paper appears a solution for acoustic emission analysis commonly known as noise. For the accomplishmentof this work a personal computer is used, besides sensors (microphones and boards designed and built for signalconditioning. These components are part of a virtual instrument used for monitoring the acoustical emission. Themain goal of this work is to develop a virtual instrument that supplies many important data as the result of ananalysis allowing to have information in an easy and friendly way. Moreover this information is very useful forstudying and resolving several situations in planning, production and testing areas.The main characteristics of the virtual instrument are: signal analysis in time, effective power measurement inDecibels (dB, average intensity taken from the principle of paired microphones, as well as the data analysis infrequency. These characteristics are included to handle two information channels.

  10. Electromagnetic acoustic imaging.

    Science.gov (United States)

    Emerson, Jane F; Chang, David B; McNaughton, Stuart; Jeong, Jong Seob; Shung, K K; Cerwin, Stephen A

    2013-02-01

    Electromagnetic acoustic imaging (EMAI) is a new imaging technique that uses long-wavelength RF electromagnetic (EM) waves to induce ultrasound emission. Signal intensity and image contrast have been found to depend on spatially varying electrical conductivity of the medium in addition to conventional acoustic properties. The resultant conductivity- weighted ultrasound data may enhance the diagnostic performance of medical ultrasound in cancer and cardiovascular applications because of the known changes in conductivity of malignancy and blood-filled spaces. EMAI has a potential advantage over other related imaging techniques because it combines the high resolution associated with ultrasound detection with the generation of the ultrasound signals directly related to physiologically important electrical properties of the tissues. Here, we report the theoretical development of EMAI, implementation of a dual-mode EMAI/ultrasound apparatus, and successful demonstrations of EMAI in various phantoms designed to establish feasibility of the approach for eventual medical applications.

  11. Acoustic emission source modeling

    Directory of Open Access Journals (Sweden)

    Hora P.

    2010-07-01

    Full Text Available The paper deals with the acoustic emission (AE source modeling by means of FEM system COMSOL Multiphysics. The following types of sources are used: the spatially concentrated force and the double forces (dipole. The pulse excitation is studied in both cases. As a material is used steel. The computed displacements are compared with the exact analytical solution of point sources under consideration.

  12. Acoustic Characterization of Soil

    Science.gov (United States)

    2007-11-02

    ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER Dept. of Electrical & Computer Enginnering Dept Natural Resources...same transduction device is used for transmit and receive, and the broad-band mechanical matching between the transduction device and the acoustic...has a direct influence over the imaging depth for a given dynamic range. Figure 10 demonstrated the influence of the roundtrip propagation loss as a

  13. Acoustic Communications for UUVs

    Science.gov (United States)

    2016-06-07

    through use of high-gain, error-control coding coupled with a modified decision feedback equalizer (DFE) which allows the gain to be exploited prior to...finished it wait for feedback from the receiver. At the host each packet is decoded and displayed if it is correct, or added to a list of bad packets if it...Systems Laboratory, Florida Alantic University, July 1998. L. Freitag el al: ‘A Bidriectional Coherent Acoustic Communications Systems for Underwater

  14. Acoustically enhanced heat transport

    Energy Technology Data Exchange (ETDEWEB)

    Ang, Kar M.; Hung, Yew Mun; Tan, Ming K., E-mail: tan.ming.kwang@monash.edu [School of Engineering, Monash University Malaysia, 47500 Bandar Sunway, Selangor (Malaysia); Yeo, Leslie Y. [Micro/Nanophysics Research Laboratory, RMIT University, Melbourne, VIC 3001 (Australia); Friend, James R. [Department of Mechanical and Aerospace Engineering, University of California, San Diego, California 92093 (United States)

    2016-01-15

    We investigate the enhancement of heat transfer in the nucleate boiling regime by inducing high frequency acoustic waves (f ∼ 10{sup 6} Hz) on the heated surface. In the experiments, liquid droplets (deionized water) are dispensed directly onto a heated, vibrating substrate. At lower vibration amplitudes (ξ{sub s} ∼ 10{sup −9} m), the improved heat transfer is mainly due to the detachment of vapor bubbles from the heated surface and the induced thermal mixing. Upon increasing the vibration amplitude (ξ{sub s} ∼ 10{sup −8} m), the heat transfer becomes more substantial due to the rapid bursting of vapor bubbles happening at the liquid-air interface as a consequence of capillary waves travelling in the thin liquid film between the vapor bubble and the air. Further increases then lead to rapid atomization that continues to enhance the heat transfer. An acoustic wave displacement amplitude on the order of 10{sup −8} m with 10{sup 6} Hz order frequencies is observed to produce an improvement of up to 50% reduction in the surface temperature over the case without acoustic excitation.

  15. Acoustics, computers and measurements

    Science.gov (United States)

    Truchard, James J.

    2003-10-01

    The human ear has created a high standard for the requirements of acoustical measurements. The transient nature of most acoustical signals has limited the success of traditional volt meters. Professor Hixson's pioneering work in electroacoustical measurements at ARL and The University of Texas helped set the stage for modern computer-based measurements. The tremendous performance of modern PCs and extensive libraries of signal processing functions in virtual instrumentation application software has revolutionized the way acoustical measurements are made. Today's analog to digital converters have up to 24 bits of resolution with a dynamic range of over 120 dB and a single PC processor can process 112 channels of FFTs at 4 kHz in real time. Wavelet technology further extends the capabilities for analyzing transients. The tools available for measurements in speech, electroacoustics, noise, and vibration represent some of the most advanced measurement tools available. During the last 50 years, Professor Hixson has helped drive this revolution from simple oscilloscope measurements to the modern high performance computer-based measurements.

  16. Acoustically enhanced heat transport

    Science.gov (United States)

    Ang, Kar M.; Yeo, Leslie Y.; Friend, James R.; Hung, Yew Mun; Tan, Ming K.

    2016-01-01

    We investigate the enhancement of heat transfer in the nucleate boiling regime by inducing high frequency acoustic waves (f ˜ 106 Hz) on the heated surface. In the experiments, liquid droplets (deionized water) are dispensed directly onto a heated, vibrating substrate. At lower vibration amplitudes (ξs ˜ 10-9 m), the improved heat transfer is mainly due to the detachment of vapor bubbles from the heated surface and the induced thermal mixing. Upon increasing the vibration amplitude (ξs ˜ 10-8 m), the heat transfer becomes more substantial due to the rapid bursting of vapor bubbles happening at the liquid-air interface as a consequence of capillary waves travelling in the thin liquid film between the vapor bubble and the air. Further increases then lead to rapid atomization that continues to enhance the heat transfer. An acoustic wave displacement amplitude on the order of 10-8 m with 106 Hz order frequencies is observed to produce an improvement of up to 50% reduction in the surface temperature over the case without acoustic excitation.

  17. High-Frequency Seafloor Acoustics

    CERN Document Server

    Jackson, Darrell R

    2007-01-01

    High-Frequency Seafloor Acoustics is the first book in a new series sponsored by the Office of Naval Research on the latest research in underwater acoustics. This exciting new title provides ready access to experimental data, theory, and models relevant to high-frequency seafloor acoustics and will be of interest to sonar engineers and researchers working in underwater acoustics. The physical characteristics of the seafloor affecting acoustic propagation and scattering are covered, including physical and geoacoustic properties and surface roughness. Current theories for acoustic propagation in sediments are presented along with corresponding models for reflection, scattering, and seafloor penetration. The main text is backed up by an extensive bibliography and technical appendices.

  18. Latest Trends in Acoustic Sensing

    Directory of Open Access Journals (Sweden)

    Cinzia Caliendo

    2014-03-01

    Full Text Available Acoustics-based methods offer a powerful tool for sensing applications. Acoustic sensors can be applied in many fields ranging from materials characterization, structural health monitoring, acoustic imaging, defect characterization, etc., to name just a few. A proper selection of the acoustic wave frequency over a wide spectrum that extends from infrasound (<20 Hz up to ultrasound (in the GHz–band, together with a number of different propagating modes, including bulk longitudinal and shear waves, surface waves, plate modes, etc., allow acoustic tools to be successfully applied to the characterization of gaseous, solid and liquid environments. The purpose of this special issue is to provide an overview of the research trends in acoustic wave sensing through some cases that are representative of specific applications in different sensing fields.

  19. Fundamentals of Shallow Water Acoustics

    CERN Document Server

    Katsnelson, Boris; Lynch, James

    2012-01-01

    Shallow water acoustics (SWA), the study of how low and medium frequency sound propagates and scatters on the continental shelves of the world's oceans, has both technical interest and a large number of practical applications. Technically, shallow water poses an interesting medium for the study of acoustic scattering, inverse theory, and propagation physics in a complicated oceanic waveguide. Practically, shallow water acoustics has interest for geophysical exploration, marine mammal studies, and naval applications. Additionally, one notes the very interdisciplinary nature of shallow water acoustics, including acoustical physics, physical oceanography, marine geology, and marine biology. In this specialized volume, the authors, all of whom have extensive at-sea experience in U.S. and Russian research efforts, have tried to summarize the main experimental, theoretical, and computational results in shallow water acoustics, with an emphasis on providing physical insight into the topics presented.

  20. Toward a science of silence: The consequences of leaving a memory unsaid

    DEFF Research Database (Denmark)

    Stone, Charles; Coman, Alin; Brown, Adam;

    2012-01-01

    Silence about the past permeates acts of remembering, with marked mnemonic consequences. Mnemonic silence—the absence of expressing a memory—is public in nature and is embedded within communicative acts, such as conversations. As such, silence has the potential to affect both speakers—the source...... the silence is intentional or unintentional, and whether the silenced memory is related or unrelated to the memories emerging in a conversation. These factors appear to be critical when considering the mnemonic consequences. Moreover, the influence of silence on memory varies between speaker and listener...

  1. Steam generator corrosion 2007; Dampferzeugerkorrosion 2007

    Energy Technology Data Exchange (ETDEWEB)

    Born, M. (ed.)

    2007-07-01

    Between 8th and 9th November, 2007, SAXONIA Standortentwicklungs- und -verwertungsgesellschaft GmbH (Freiberg, Federal Republic of Germany) performed the 3rd Freiberger discussion conference ''Fireside boiler corrosion''. The topics of the lectures are: (a) Steam generator corrosion - an infinite history (Franz W. Alvert); (b) CFD computations for thermal waste treatment plants - a contribution for the damage recognition and remedy (Klaus Goerner, Thomas Klasen); (c) Experiences with the use of corrosion probes (Siegfried R. Horn, Ferdinand Haider, Barbara Waldmann, Ragnar Warnecke); (d) Use of additives for the limitation of the high temperature chlorine corrosion as an option apart from other measures to the corrosion protection (Wolfgang Spiegel); (e) Current research results and aims of research with respect to chlorine corrosion (Ragnar Warnecke); (f) Systematics of the corrosion phenomena - notes for the enterprise and corrosion protection (Thomas Herzog, Wolfgang Spiegel, Werner Schmidl); (g) Corrosion protection by cladding in steam generators of waste incinerators (Joerg Metschke); (h) Corrosion protection and wear protection by means of thermal spraying in steam generators (Dietmar Bendix); (i) Review of thick film nickelized components as an effective protection against high-temperature corrosion (Johann-Wilhelm Ansey); (j) Fireproof materials for waste incinerators - characteristics and profile of requirement (Johannes Imle); (k) Service life-relevant aspects of fireproof linings in the thermal recycling of waste (Till Osthoevener and Wolfgang Kollenberg); (l) Alternatives to the fireproof material in the heating space (Heino Sinn); (m) Cladding: Inconal 625 contra 686 - Fundamentals / applications in boiler construction and plant construction (Wolfgang Hoffmeister); (n) Thin films as efficient corrosion barriers - thermal spray coating in waste incinerators and biomass firing (Ruediger W. Schuelein, Steffen Hoehne, Friedrich

  2. Spacecraft Internal Acoustic Environment Modeling

    Science.gov (United States)

    Chu, S. Reynold; Allen, Chris

    2009-01-01

    The objective of the project is to develop an acoustic modeling capability, based on commercial off-the-shelf software, to be used as a tool for oversight of the future manned Constellation vehicles. The use of such a model will help ensure compliance with acoustic requirements. Also, this project includes modeling validation and development feedback via building physical mockups and conducting acoustic measurements to compare with the predictions.

  3. Acoustic Imaging of Combustion Noise

    Science.gov (United States)

    Ramohalli, K. N.; Seshan, P. K.

    1984-01-01

    Elliposidal acoustic mirror used to measure sound emitted at discrete points in burning turbulent jets. Mirror deemphasizes sources close to target source and excludes sources far from target. At acoustic frequency of 20 kHz, mirror resolves sound from region 1.25 cm wide. Currently used by NASA for research on jet flames. Produces clearly identifiable and measurable variation of acoustic spectral intensities along length of flame. Utilized in variety of monitoring or control systems involving flames or other reacting flows.

  4. Acoustic streaming with heat exchange

    Science.gov (United States)

    Gubaidullin, A. A.; Pyatkova, A. V.

    2016-10-01

    Acoustic streaming in a cylindrical cavity with heat exchange is numerically investigated. The cavity is filled with air. The boundaries of the cavity are maintained at constant temperature. The features of acoustic streaming manifesting with the decrease in the frequency of vibration in comparison with the resonant frequency are determined. The influence of the nonlinearity of process on acoustic streaming is shown. The nonlinearity is caused by the increase of the vibration amplitude.

  5. Improved microwave steam distillation apparatus for isolation of essential oils. Comparison with conventional steam distillation.

    Science.gov (United States)

    Sahraoui, Naima; Vian, Maryline Abert; Bornard, Isabelle; Boutekedjiret, Chahrazed; Chemat, Farid

    2008-11-14

    Steam distillation (SD) is routinely used by analysts for the isolation of essential oils from herbs, flowers and spices prior to gas chromatographic analysis. In this work, a new process design and operation for an improved microwave steam distillation (MSD) of essential oils from aromatic natural products was developed. To demonstrate its feasibility, MSD was compared with the conventional technique, SD, for the analysis of volatile compounds from dry lavender flowers (Lavandula angustifolia Mill., Lamiaceae). Essential oils isolated by MSD were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained by SD, but MSD was better than SD in terms of rapidity (6 min versus 30 min for lavender flowers), thereby allowing substantial savings of costs in terms of time and energy. Lavender flowers treated by MSD and SD were observed by scanning electron microscopy. Micrographs provide evidence of more rapid opening of essential oil glands treated by MSD, in contrast to conventional SD.

  6. Improvements in the simulation of a main steam line break with steam generator tube rupture

    Science.gov (United States)

    Gallardo, Sergio; Querol, Andrea; Verdú, Gumersindo

    2014-06-01

    The result of simultaneous Main Steam Line Break (MSLB) and a Steam Generator Tube Rupture (SGTR) in a Pressurized Water Reactor (PWR) is a depressurization in the secondary and primary system because both systems are connected through the SGTR. The OECD/NEA ROSA-2 Test 5 performed in the Large Scale Test Facility (LSTF) reproduces these simultaneous breaks in a Pressurized Water Reactor (PWR). A simulation of this Test 5 was made with the thermal-hydraulic code TRACE5. Some discrepancies found, such as an underestimation of SG-A secondary pressure during the depressurization and overestimation of the primary pressure drop after the first Power Operated Relief Valve (PORV) opening can be improved increasing the nodalization of the Upper Head in the pressure vessel and meeting the actual fluid conditions of Upper Head during the transient.

  7. Steam Oxidation and Chromia Evaporation in Ultra-Supercritical Steam Boilers and Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Gordon H. Holcomb

    2009-01-01

    U.S. Department of Energy’s goals include power generation from coal at 60% efficiency, which requires steam conditions of up to 760 °C and 340 atm, so-called ultra-supercritical (USC) conditions. Evaporation of protective chromia scales is expected to be a primary corrosion mechanism. A methodology to calculate Cr evaporation rates from chromia scales was developed and combined with Cr diffusion calculations within the alloy (with a constant flux of Cr leaving the alloy from evaporation) to predict Cr concentration profiles and to predict the time until breakaway oxidation. At the highest temperatures and pressures, the time until breakaway oxidation was predicted to be quite short for the turbine blade, and of concern within the steam pipe and the higher temperature portions of the superheater tube. Alloy additions such as Ti may allow for a reduction in evaporation rate with time, mitigating the deleterious effects of chromia evaporation.

  8. Combined Environment Acoustic Chamber (CEAC)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The CEAC imposes combined acoustic, thermal and mechanical loads on aerospace structures. The CEAC is employed to measure structural response and determine...

  9. Acoustic Communications Measurement Systems (ACOMMS)

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Design and develop adaptive signal processing techniques to improve underwater acoustic communications and networking. Phase coherent and incoherent signal...

  10. Flow studies in a wet steam turbine

    Science.gov (United States)

    Evans, D. H.; Pouchot, W. D.

    1974-01-01

    The design and test results of a four stage wet vapor turbine operating with slightly superheated inlet steam and expanding to 10% exit moisture are presented. High speed movies at 3000 frames per second of liquid movement on the pressure side and along the trailing edge of the last stator blade are discussed along with back lighted photographs of moisture drops as they were torn from the stator blade trailing edge. Movies at lower framing rates were also taken of the exit of the last rotating blade and the casing moisture removal slot located in line with the rotor blade shroud. Also moisture removal data are presented of casing slot removal at the exit of the third and fourth rotor blades and for slots located in the trailing edge of the last stator blade. Finally, the degradation of turbine thermodynamic performance due to condensation formation and movement is discussed.

  11. Steam generator issues in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Strosnider, J.R. [NRC, Washington, DC (United States)

    1997-02-01

    Alloy 600 steam generator tubes in the US have exhibited degradation mechanisms similar to those observed in other countries. Effective programs have been implemented to address several degradation mechanisms including: wastage; mechanical wear; pitting; and fatigue. These degradation mechanisms are fairly well understood as indicated by the ability to effectively mitigate/manage them. Stress corrosion cracking (SCC) is the dominant degradation mechanism in the US. SCC poses significant inspection and management challenges to the industry and the regulators. The paper also addresses issues of research into SCC, inspection programs, plugging, repair strategies, water chemistry, and regulatory control. Emerging issues in the US include: parent tube cracking at sleeve joints; detection and repair of circumferential cracks; free span cracking; inspection and cracking of dented regions; and severe accident analysis.

  12. Lower head integrity under steam explosion loads

    Energy Technology Data Exchange (ETDEWEB)

    Theofanous, T.G.; Yuen, W.W.; Angelini, S.; Freeman, K.; Chen, X.; Salmassi, T. [Center for Risk Studies and Safety, Univ. of California, Santa Barbara, CA (United States); Sienicki, J.J.

    1998-01-01

    Lower head integrity under steam explosion loads in an AP600-like reactor design is considered. The assessment is the second part of an evaluation of the in-vessel retention idea as a severe accident management concept, the first part (DOE/ID-10460) dealing with thermal loads. The assessment is conducted in terms of the Risk Oriented Accident Analysis Methodology (ROAAM), and includes the comprehensive evaluation of all relevant severe accident scenarios, melt conditions and timing of release from the core region, fully 3D mixing and explosion wave dynamics, and lower head fragility under local, dynamic loading. All of these factors and brought together in a ROAAM Probabilistic Framework to evaluate failure likelihood. The conclusion is that failure is `physically unreasonable`. (author)

  13. Water treatment processes for oilfield steam injection

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, A.; Pauley, J.C. [Chevron Canada Ltd., Vancouver, BC (Canada)

    2009-07-01

    Various water treatment processes are used within the oilfield industry. Processes tend to be common within one region of the world, but different between regions due to untreated water characteristics and treated water quality requirements. This paper summarized Chevron's view of water treatment requirements and processes for oilfield steam injection. It identified water treatment systems that have been used at thermal projects, where they are most commonly utilized, their purpose, and the limits of each process. The advantages and disadvantages of different water treatment systems were also reviewed. The paper focused on the treatment of fresh waters, low-TDS produced waters, high-hardness waters, and high-silica produced waters. Challenges and opportunities were also identified. It was concluded that the challenges created by high-silica, or by high-hardness produced waters lead to more costly processes. 25 refs., 5 tabs., 4 figs.

  14. Modeling of steam distillation mechanism during steam injection process using artificial intelligence.

    Science.gov (United States)

    Daryasafar, Amin; Ahadi, Arash; Kharrat, Riyaz

    2014-01-01

    Steam distillation as one of the important mechanisms has a great role in oil recovery in thermal methods and so it is important to simulate this process experimentally and theoretically. In this work, the simulation of steam distillation is performed on sixteen sets of crude oil data found in the literature. Artificial intelligence (AI) tools such as artificial neural network (ANN) and also adaptive neurofuzzy interference system (ANFIS) are used in this study as effective methods to simulate the distillate recoveries of these sets of data. Thirteen sets of data were used to train the models and three sets were used to test the models. The developed models are highly compatible with respect to input oil properties and can predict the distillate yield with minimum entry. For showing the performance of the proposed models, simulation of steam distillation is also done using modified Peng-Robinson equation of state. Comparison between the calculated distillates by ANFIS and neural network models and also equation of state-based method indicates that the errors of the ANFIS model for training data and test data sets are lower than those of other methods.

  15. Simulation of a main steam line break with steam generator tube rupture using trace

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo, S.; Querol, A.; Verdu, G. [Departamento de Ingenieria Quimica Y Nuclear, Universitat Politecnica de Valencia, Camino de Vera s/n, 46022, Valencia (Spain)

    2012-07-01

    A simulation of the OECD/NEA ROSA-2 Project Test 5 was made with the thermal-hydraulic code TRACE5. Test 5 performed in the Large Scale Test Facility (LSTF) reproduced a Main Steam Line Break (MSLB) with a Steam Generator Tube Rupture (SGTR) in a Pressurized Water Reactor (PWR). The result of these simultaneous breaks is a depressurization in the secondary and primary system in loop B because both systems are connected through the SGTR. Good approximation was obtained between TRACE5 results and experimental data. TRACE5 reproduces qualitatively the phenomena that occur in this transient: primary pressure falls after the break, stagnation of the pressure after the opening of the relief valve of the intact steam generator, the pressure falls after the two openings of the PORV and the recovery of the liquid level in the pressurizer after each closure of the PORV. Furthermore, a sensitivity analysis has been performed to know the effect of varying the High Pressure Injection (HPI) flow rate in both loops on the system pressures evolution. (authors)

  16. Modeling of Steam Distillation Mechanism during Steam Injection Process Using Artificial Intelligence

    Science.gov (United States)

    Ahadi, Arash; Kharrat, Riyaz

    2014-01-01

    Steam distillation as one of the important mechanisms has a great role in oil recovery in thermal methods and so it is important to simulate this process experimentally and theoretically. In this work, the simulation of steam distillation is performed on sixteen sets of crude oil data found in the literature. Artificial intelligence (AI) tools such as artificial neural network (ANN) and also adaptive neurofuzzy interference system (ANFIS) are used in this study as effective methods to simulate the distillate recoveries of these sets of data. Thirteen sets of data were used to train the models and three sets were used to test the models. The developed models are highly compatible with respect to input oil properties and can predict the distillate yield with minimum entry. For showing the performance of the proposed models, simulation of steam distillation is also done using modified Peng-Robinson equation of state. Comparison between the calculated distillates by ANFIS and neural network models and also equation of state-based method indicates that the errors of the ANFIS model for training data and test data sets are lower than those of other methods. PMID:24883365

  17. EFFECT OF STEAMING ON THE COLOUR CHANGE OF SOFTWOODS

    Directory of Open Access Journals (Sweden)

    Laszlo Tolvaj,

    2012-05-01

    Full Text Available The heat treatment of softwood (i.e. spruce, pine, fir, and larch may result in significant colour changes. During this study Scots pine and spruce samples were steamed and analysed for their altered hue and lightness. Treatments included: 0 to 22 days of steaming time at a temperature range of 70 to 100°C. The outcome included a variety of colours between the initial hues and brownish tint. These new colours are similar to that of aged furniture and indoor wooden structures. Consequently, properly steamed softwood may be used to repair historical artefacts and relic furniture. Besides restoration, steamed stocks are excellent sources for manufacture of periodical furniture, where the aged appearance has aesthetical value. Results however, indicated that steaming at a temperature above 90 ˚C has a bleaching effect, i.e. the coloured chemical components formed by moderate steaming may be removed. Furthermore, we observed a linear correlation between lightness and colour hue at all steaming times and temperatures.

  18. Optimum sizing of steam turbines for concentrated solar power plants

    Directory of Open Access Journals (Sweden)

    Andreas Poullikkas, Constantinos Rouvas, Ioannis Hadjipaschalis, George Kourtis

    2012-01-01

    Full Text Available In this work, a selection of the optimum steam turbine type and size for integration in concentrated solar power (CSP plants is carried out. In particular, the optimum steam turbine input and output interfaces for a range of CSP plant capacity sizes are identified. Also, efficiency and electricity unit cost curves for various steam turbine capacities are estimated by using a combination of the Steam Pro software module of the Thermoflow Suite 18 package and the IPP v2.1 optimization software tool. The results indicate that the estimated efficiency and the expected specific capital cost of the power block are very important criteria in choosing the best steam turbine size of a CSP plant. For capacity sizes of 10kWe up to 50MWe, the steam turbine efficiency increases and the steam turbine expected specific capital cost of the power block decreases at a high rate, whereas for larger sizes they remain almost constant. Thus, there is significant efficiency gains to be realized and large cost savings in increasing the turbine size up to 50MWe. Finally, although the cost of electricity of a CSP plant with capacities greater than 1MWe is significantly reduced to less than 1US$/kWh, currently such technology can only become economically viable through supporting schemes.

  19. Optimum sizing of steam turbines for concentrated solar power plants

    Energy Technology Data Exchange (ETDEWEB)

    Poullikkas, Andreas; Rouvas, Constantinos; Hadjipaschalis, Ioannis; Kourtis, Gorge [Electricity Authority of Cyprus, P.O. Box 24506, 1399 Nicosia (Cyprus)

    2012-07-01

    In this work, a selection of the optimum steam turbine type and size for integration in concentrated solar power (CSP) plants is carried out. In particular, the optimum steam turbine input and output interfaces for a range of CSP plant capacity sizes are identified. Also, efficiency and electricity unit cost curves for various steam turbine capacities are estimated by using a combination of the Steam Pro software module of the Thermoflow Suite 18 package and the IPP v2.1 optimization software tool. The results indicate that the estimated efficiency and the expected specific capital cost of the power block are very important criteria in choosing the best steam turbine size of a CSP plant. For capacity sizes of 10kWe up to 50MWe, the steam turbine efficiency increases and the steam turbine expected specific capital cost of the power block decreases at a high rate, whereas for larger sizes they remain almost constant. Thus, there is significant efficiency gains to be realized and large cost savings in increasing the turbine size up to 50MWe. Finally, although the cost of electricity of a CSP plant with capacities greater than 1MWe is significantly reduced to less than 1US$/kWh, currently such technology can only become economically viable through supporting schemes.

  20. Steam generator tube inspection in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Fukui, Shigetaka [Japan Power Engineering and Inspection Corp., Tokyo (Japan)

    1997-02-01

    Steam generator tube inspection was first carried out in 1971 at Mihama Unit-1 that is first PWR plant in Japan, when the plant was brought into the first annual inspection. At that time, inspection was made on sampling basis, and only bobbin coil probe was used. After experiencing various kinds of tube degradations, inspection method was changed from sampling to all number of tubes, and various kinds of probes were used to get higher detectability of flaw. At present, it is required that all the tubes shall be inspected in their full length at each annual inspection using standard bobbin coil probe, and some special probes for certain plants that have susceptibility of occurrence of flaw. Sleeve repaired portion is included in this inspection. As a result of analyses of eddy current testing data, all indications that have been evaluated to be 20% wall thickness or deeper shall be repaired by either plugging or sleeving, where flaw morphology is to be a wastage or wear. Other types of flaw such as IGA/SCC are not allowed to be left inservice when those indications are detected. These inspections are performed according to inspection procedures that are approved by regulatory authority. Actual inspections are witnessed by the Japan Power engineering and inspection corporation (JAPEIC)`s inspectors during data acquisition and analysis, and they issue inspection report to authority for review and approval. It is achieved high safety performance of steam generator through this method of inspections, however. some tube leakage problems were experienced in the past. To prevent recurrence of such events, government is conducting development and verification test program for new eddy current testing technology.

  1. FLUIDIZED BED STEAM REFORMER MONOLITH FORMATION

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C

    2006-12-22

    Fluidized Bed Steam Reforming (FBSR) is being considered as an alternative technology for the immobilization of a wide variety of aqueous high sodium containing radioactive wastes at various DOE facilities in the United States. The addition of clay, charcoal, and a catalyst as co-reactants converts aqueous Low Activity Wastes (LAW) to a granular or ''mineralized'' waste form while converting organic components to CO{sub 2} and steam, and nitrate/nitrite components, if any, to N{sub 2}. The waste form produced is a multiphase mineral assemblage of Na-Al-Si (NAS) feldspathoid minerals with cage-like structures that atomically bond radionuclides like Tc-99 and anions such as SO{sub 4}, I, F, and Cl. The granular product has been shown to be as durable as LAW glass. Shallow land burial requires that the mineralized waste form be able to sustain the weight of soil overburden and potential intrusion by future generations. The strength requirement necessitates binding the granular product into a monolith. FBSR mineral products were formulated into a variety of monoliths including various cements, Ceramicrete, and hydroceramics. All but one of the nine monoliths tested met the <2g/m{sup 2} durability specification for Na and Re (simulant for Tc-99) when tested using the Product Consistency Test (PCT; ASTM C1285). Of the nine monoliths tested the cements produced with 80-87 wt% FBSR product, the Ceramicrete, and the hydroceramic produced with 83.3 wt% FBSR product, met the compressive strength and durability requirements for an LAW waste form.

  2. Bacterial Cellular Engineering by Genome Editing and Gene Silencing

    Directory of Open Access Journals (Sweden)

    Nobutaka Nakashima

    2014-02-01

    Full Text Available Genome editing is an important technology for bacterial cellular engineering, which is commonly conducted by homologous recombination-based procedures, including gene knockout (disruption, knock-in (insertion, and allelic exchange. In addition, some new recombination-independent approaches have emerged that utilize catalytic RNAs, artificial nucleases, nucleic acid analogs, and peptide nucleic acids. Apart from these methods, which directly modify the genomic structure, an alternative approach is to conditionally modify the gene expression profile at the posttranscriptional level without altering the genomes. This is performed by expressing antisense RNAs to knock down (silence target mRNAs in vivo. This review describes the features and recent advances on methods used in genomic engineering and silencing technologies that are advantageously used for bacterial cellular engineering.

  3. Silences and moral narratives: infanticide as reproductive disruption.

    Science.gov (United States)

    Aengst, Jennifer

    2014-01-01

    Infanticide is a widespread practice, yet few ethnographic and theoretical works examine this. Drawing on ethnographic research conducted in the Indian Himalayas, I argue that infanticide is a form of reproductive disruption that elicits both public moral judgments and private silences. In this Himalayan context, the stigmas of abortion and premarital sex prevent community acknowledgement of infanticide and baby abandonment. Unmarried women hide their pregnancies, deliver and abandon their babies, and later are rushed to the hospital with postdelivery complications. While biomedical doctors deal with the debris of infanticide (postpartum hemorrhage), there is no formal accounting of the practice. I argue that by regarding infanticide as a form of reproductive disruption, we can open up women's narratives of pain and suffering that are silenced because of moral repugnance.

  4. Effects of a silenced gene in Boolean network models

    Directory of Open Access Journals (Sweden)

    Emir Haliki

    2017-03-01

    Full Text Available Gene regulation and their regulatory networks are one of the most challenging research problems of computational biology and complexity sciences. Gene regulation is formed by indirect interaction between DNA segments which are protein coding genes to configure the expression level of one another. Prevention of expression of any genes in gene regulation at the levels of transcription or translation indicates the gene silencing event. The present study examined what types of results in gene silencing would bring about in the dynamics of Boolean genetic regulatory mechanisms. The analytical study was performed in gene expression variations of Boolean dynamics first, then the related numerical analysis was simulated in real networks in the literature.

  5. Gene silencing: a therapeutic approach to combat influenza virus infections.

    Science.gov (United States)

    Khanna, Madhu; Saxena, Latika; Rajput, Roopali; Kumar, Binod; Prasad, Rajendra

    2015-01-01

    Selective gene silencing technologies such as RNA interference (RNAi) and nucleic acid enzymes have shown therapeutic potential for treating viral infections. Influenza virus is one of the major public health concerns around the world and its management is challenging due to a rapid increase in antiviral resistance. Influenza vaccine also has its limitations due to the emergence of new strains that may escape the immunity developed by the previous year's vaccine. Antiviral drugs are the primary mode of prevention and control against a pandemic and there is an urgency to develop novel antiviral strategies against influenza virus. In this review, we discuss the potential utility of several gene silencing mechanisms and their prophylactic and therapeutic potential against the influenza virus.

  6. Three distinct suppressors of RNA silencing encoded by a 20-kb viral RNA genome

    Science.gov (United States)

    Lu, Rui; Folimonov, Alexey; Shintaku, Michael; Li, Wan-Xiang; Falk, Bryce W.; Dawson, William O.; Ding, Shou-Wei

    2004-11-01

    Viral infection in both plant and invertebrate hosts requires a virus-encoded function to block the RNA silencing antiviral defense. Here, we report the identification and characterization of three distinct suppressors of RNA silencing encoded by the 20-kb plus-strand RNA genome of citrus tristeza virus (CTV). When introduced by genetic crosses into plants carrying a silencing transgene, both p20 and p23, but not coat protein (CP), restored expression of the transgene. Although none of the CTV proteins prevented DNA methylation of the transgene, export of the silencing signal (capable of mediating intercellular silencing spread) was detected only from the F1 plants expressing p23 and not from the CP- or p20-expressing F1 plants, demonstrating suppression of intercellular silencing by CP and p20 but not by p23. Thus, intracellular and intercellular silencing are each targeted by a CTV protein, whereas the third, p20, inhibits silencing at both levels. Notably, CP suppresses intercellular silencing without interfering with intracellular silencing. The novel property of CP suggests a mechanism distinct to p20 and all of the other viral suppressors known to interfere with intercellular silencing and that this class of viral suppressors may not be consistently identified by Agrobacterium coinfiltration because it also induces RNA silencing against the infiltrated suppressor transgene. Our analyses reveal a sophisticated viral counter-defense strategy that targets the silencing antiviral pathway at multiple steps and may be essential for protecting CTV with such a large RNA genome from antiviral silencing in the perennial tree host. RNA interference | citrus tristeza virus | virus synergy | antiviral immunity

  7. Effects of phase transformation of steam-water relative permeabilities

    Energy Technology Data Exchange (ETDEWEB)

    Verma, A.K.

    1986-03-01

    A combined theoretical and experimental study of steam-water relative permeabilities (RPs) was carried out. First, an experimental study of two-phase concurrent flow of steam and water was conducted and a set of RP curves was obtained. These curves were compared with semi-empirical and experimental results obtained by other investigators for two-phase, two-component flow (oil/gas; gas/water; gas/oil). It was found that while the wetting phase RPs were in good agreement, RPs for the steam phase were considerably higher than the non-wetting phase RPs in two-component systems. This enhancement of steam RP is attributed to phase transformation effects at the pore level in flow channels. The effects of phase transformation were studied theoretically. This study indicates that there are two separate mechanisms by which phase transformation affects RP curves: (1) Phase transformation is converging-diverging flow channels can cause an enhancement of steam phase RP. In a channel dominated by steam a fraction of the flowing steam condenses upstream from the constriction, depositing its latent heat of condensation. This heat is conducted through the solid grains around the pore throat, and evaporation takes place downstream from it. Therefore, for a given bulk flow quality; a smaller fraction of steam actually flows through the throat segments. This pore-level effect manifests itself as relative permeability enhancement on a macroscopic level; and (2) phase transformation along the interface of a stagnant phase and the phase flowing around it controls the irreducible phase saturation. Therefore, the irreducible phase saturation in steam-water flow will depend, among other factors, on the boundary conditions of the flow.

  8. Acoustic transparency and slow sound using detuned acoustic resonators

    DEFF Research Database (Denmark)

    Santillan, Arturo Orozco; Bozhevolnyi, Sergey I.

    2011-01-01

    We demonstrate that the phenomenon of acoustic transparency and slowsound propagation can be realized with detuned acoustic resonators (DAR), mimicking thereby the effect of electromagnetically induced transparency (EIT) in atomic physics. Sound propagation in a pipe with a series of side...

  9. Developing Gene Silencing for the Study and Treatment of Dystonia

    Science.gov (United States)

    2016-10-01

    AWARD NUMBER: W81XWH-14-1-0282 TITLE: Developing Gene Silencing for the Study and Treatment of Dystonia PRINCIPAL INVESTIGATOR: Pedro Gonzalez...AUTHOR(S) Pedro Gonzalez-Alegre 5d. PROJECT NUMBER 0010495692 5e. TASK NUMBER Email: gonzalezap@email.chop.edu 5f. WORK UNIT NUMBER 7. PERFORMING...motor func tion. More importantly, w e will check if no side effects or toxicity occurs. Successful completion of our studies w ill move us a step

  10. Optical silencing of C. elegans cells with arch proton pump.

    Directory of Open Access Journals (Sweden)

    Ayako Okazaki

    Full Text Available BACKGROUND: Optogenetic techniques using light-driven ion channels or ion pumps for controlling excitable cells have greatly facilitated the investigation of nervous systems in vivo. A model organism, C. elegans, with its small transparent body and well-characterized neural circuits, is especially suitable for optogenetic analyses. METHODOLOGY/PRINCIPAL FINDINGS: We describe the application of archaerhodopsin-3 (Arch, a recently reported optical neuronal silencer, to C. elegans. Arch::GFP expressed either in all neurons or body wall muscles of the entire body by means of transgenes were localized, at least partially, to the cell membrane without adverse effects, and caused locomotory paralysis of worms when illuminated by green light (550 nm. Pan-neuronal expression of Arch endowed worms with quick and sustained responsiveness to such light. Worms reliably responded to repeated periods of illumination and non-illumination, and remained paralyzed under continuous illumination for 30 seconds. Worms expressing Arch in different subsets of motor neurons exhibited distinct defects in the locomotory behavior under green light: selective silencing of A-type motor neurons affected backward movement while silencing of B-type motor neurons affected forward movement more severely. Our experiments using a heat-shock-mediated induction system also indicate that Arch becomes fully functional only 12 hours after induction and remains functional for more than 24 hour. CONCLUSIONS/SGNIFICANCE: Arch can be used for silencing neurons and muscles, and may be a useful alternative to currently widely used halorhodopsin (NpHR in optogenetic studies of C. elegans.

  11. Thermodynamic control of small RNA-mediated gene silencing

    Directory of Open Access Journals (Sweden)

    Kumiko eUi-Tei

    2012-06-01

    Full Text Available Small interfering RNAs (siRNAs and microRNAs (miRNAs are crucial regulators of posttranscriptional gene silencing, which is referred to as RNA interference (RNAi or RNA silencing. In RNAi, siRNA loaded onto the RNA-induced silencing complex (RISC downregulates target gene expression by cleaving mRNA whose sequence is perfectly complementary to the siRNA guide strand. We previously showed that highly functional siRNAs possessed the following characteristics: A or U residues at nucleotide position 1 measured from the 5’ terminal, four to seven A/Us in positions 1–7, and G or C residues at position 19. This finding indicated that an RNA strand with a thermodynamically unstable 5’ terminal is easily retained in the RISC and functions as a guide strand. In addition, it is clear that unintended genes with complementarities only in the seed region (positions 2–8 are also downregulated by off-target effects. siRNA efficiency is mainly determined by the Watson-Crick base-pairing stability formed between the siRNA seed region and target mRNA. siRNAs with a low seed-target duplex melting temperature (Tm have little or no seed-dependent off-target activity. Thus, important parts of the RNA silencing machinery may be regulated by nucleotide base-pairing thermodynamic stability. A mechanistic understanding of thermodynamic control may enable an efficient target gene-specific RNAi for functional genomics and safe therapeutic applications.

  12. Els pedagògics sons dels silencis. Enllà del silenci d’Auschwitz Los pedagógicos sonidos de los silencios. Más allá del silencio de Auschwitz The pedagogical sounds of silences. Beyond the silence of Auschwitz

    Directory of Open Access Journals (Sweden)

    Marta Burguet Arfelis

    2009-01-01

    Full Text Available Després del gran silenci d’Auschwitz, en aquest passeig pedagògic descriptiu pels sons dels silencis, ens introduïm en les semàntiques dels silencis, acceptant la seva polisèmia i descrivintne algunes de les accepcions més vinculades a l’àmbit educatiu. S’analitza, d’una banda, la genealogia dels silencis, algunes de les seves claus d’origen, i de l’altra, la teleologia dels silencis, la finalitat, pedagògica o no, dels mateixos. Alhora, partint del silenci com a valor pedagògic en aquesta educació al llarg de tota la vida, es proposen cinc etapes progressives per treballar pedagògicament els silencis, tot apostant per un salt qualitatiu axiològic entre el silenci com a estadi –estar en silenci– i el silenci com a seïtat –ser silenci–. _____________________________________________ Après le grand silence d’Auschwitz, dans ce passage de pédagogie descriptive par les sons des silences, nous nous introduisons dans les sémantiques des silences, en acceptant leur polysémie et en en décrivant certaines acceptions parmi les plus étroitement liées au domaine éducatif. Nous analysons, d’une part, la généalogie des silences, certaines de leur clés d’origine et, de l’autre, la téléologie des silences, et leur finalité, pédagogique ou non. Parallèlement, en partant du silence en tant que valeur pédagogique dans cette éducation tout au long de la vie, nous proposons cinq étapes progressives dans lesquelles travailler pédagogiquement les silences, tout en faisant le pari d’un saut qualitatif axiologique entre le silence en tant qu’état —demeurer en silence— et le silence en tant que manière d’être —être silencieux.Después del gran silencio de Auschwitz, en este paseo pedagógico descriptivo por los sonidos de los silencios nos introducimos en las semánticas de los silencios, aceptando su polisemia i describiendo algunas de las acepciones más vinculadas al ámbito educativo. Se

  13. Methane Steam Reforming Kinetics for a Rhodium-Based Catalyst

    DEFF Research Database (Denmark)

    Jakobsen, Jon Geest; Jakobsen, M.; Chorkendorff, Ib;

    2010-01-01

    Methane steam reforming is the key reaction to produce synthesis gas and hydrogen at the industrial scale. Here the kinetics of methane steam reforming over a rhodium-based catalyst is investigated in the temperature range 500-800 A degrees C and as a function of CH4, H2O and H-2 partial pressures....... The methane steam reforming reaction cannot be modeled without taking CO and H coverages into account. This is especially important at low temperatures and higher partial pressures of CO and H-2. For methane CO2 reforming experiments, it is also necessary to consider the repulsive interaction of CO...

  14. Estimating probable flaw distributions in PWR steam generator tubes

    Energy Technology Data Exchange (ETDEWEB)

    Gorman, J.A.; Turner, A.P.L. [Dominion Engineering, Inc., McLean, VA (United States)

    1997-02-01

    This paper describes methods for estimating the number and size distributions of flaws of various types in PWR steam generator tubes. These estimates are needed when calculating the probable primary to secondary leakage through steam generator tubes under postulated accidents such as severe core accidents and steam line breaks. The paper describes methods for two types of predictions: (1) the numbers of tubes with detectable flaws of various types as a function of time, and (2) the distributions in size of these flaws. Results are provided for hypothetical severely affected, moderately affected and lightly affected units. Discussion is provided regarding uncertainties and assumptions in the data and analyses.

  15. Sorption Properties of Steam Treated Wood and Plant Fibres

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben; Jensen, Signe Kamp; Jones, Dennis;

    2003-01-01

    mechanism may be the gradual filling of such micropores by lignin made to flow by further steam treatment. As a result of these counteractive mechanisms, sorption at high RH in steam treated fibres was seen to first grow, then drop and ultimately settle at a level corresponding to pure sorption at primary...... sorption sites. The annual plant fibres proved less susceptible than wood fibres to chemical breakdown from steam treatment. The component most susceptible to chemical breakdown was hemicellulose. Beech, wheat and hemp showed only a modest decrease of cellulose content, even at high temperatures, whereas...

  16. Creation of surface defects on carbon nanofibers by steam treatment

    Institute of Scientific and Technical Information of China (English)

    Zhengfeng; Shao; Min; Pang; Wei; Xia; Martin; Muhler; Changhai; Liang

    2013-01-01

    A direct strategy for the creation of defects on carbon nanofibers (CNFs) has been developed by steam treatment.Nitrogen physisorption,XRD,Raman spectra,SEM and TEM analyses proved the existence of the new defects on CNFs.BET surface area of CNFs after steam treatment was enhanced from 20 to 378 m2/g.Pd catalysts supported on CNFs were also prepared by colloidal deposition method.The different activity of Pd/CNFs catalysts in the partial hydrogenation of phenylacetylene further demonstrated the diverse surfaces of CNFs could be formed by steam treatment.

  17. Steam as turbine blade coolant: Experimental data generation

    Energy Technology Data Exchange (ETDEWEB)

    Wilmsen, B.; Engeda, A.; Lloyd, J.R. [Michigan State Univ., East Lansing, MI (United States)

    1995-10-01

    Steam as a coolant is a possible option to cool blades in high temperature gas turbines. However, to quantify steam as a coolant, there exists practically no experimental data. This work deals with an attempt to generate such data and with the design of an experimental setup used for the purpose. Initially, in order to guide the direction of experiments, a preliminary theoretical and empirical prediction of the expected experimental data is performed and is presented here. This initial analysis also compares the coolant properties of steam and air.

  18. Numerical analysis of helium-heated methane/steam reformer

    Science.gov (United States)

    Mozdzierz, M.; Brus, G.; Kimijima, S.; Szmyd, J. S.

    2016-09-01

    One of the most promising between many high temperature nuclear reactors applications is to produce hydrogen with heat gained. The simplest and the best examined method is steam reforming of methane. The fabricated hydrogen has wide range of use, for example can be electrochemically oxidized in fuel cells. However, heat management inside methane/steam reformer is extremely important because huge temperature gradients can cause catalyst deactivation. In this work the analysis of temperature field inside helium-heated methane/steam reformer is presented. The optimal system working conditions with respect to methane conversion rate are proposed.

  19. Another Piece of the "Silence in PBL" Puzzle: Students' Explanations of Dominance and Quietness as Complementary Group Roles

    Science.gov (United States)

    Skinner, Vicki J.; Braunack-Mayer, Annette; Winning, Tracey A.

    2016-01-01

    A problem-based learning (PBL) assumption is that silence is incompatible with collaborative learning. Although sociocultural studies have reinterpreted silence as collaborative, we must understand how silence occurs in PBL groups. This essay presents students' explanations of dominance, leadership, and silence as PBL group roles. An ethnographic…

  20. SELECTION OF RUSSIAN STEAM TURBINES FOR THE VIETNAMESE COMBINED GASSTEAM PLANT. THE INFLUENCE OF THE EFFICIENCY OF HIGH-PRESSURE CYLINDER OF STEAM TURBINE K-300-240-2 ON THE POWER OF A GAS-STEAM PLANT IN VIETNAM

    Directory of Open Access Journals (Sweden)

    Pham A. H.

    2015-06-01

    Full Text Available The article looks at the current state of energy in Vietnam and the selection of new Russian steam turbines for operation in combined gas-steam plant in Vietnam. The calculated results of thermal performance scheme 3x1 with combined gas-steam plant 1090 MW based on the Russian steam turbines K-330-240-2 and on the steam turbines TS2A40 Mitsubishi (station PhuMy-1, Vietnam. It also looks at the influence of the efficiency of high-pressure cylinders of Russian steam turbine K-330-240-2 on the efficiency and power of a gas-steam plant 3x1 with 1090 MW, increasing the efficiency of high-pressure cylinder of steam turbine through the use of honeycomb seals in flow part

  1. 46 CFR 54.01-10 - Steam-generating pressure vessels (modifies U-1(g)).

    Science.gov (United States)

    2010-10-01

    ...)). (a) Pressure vessels in which steam is generated are classed as “Unfired Steam Boilers” except as required otherwise by paragraph (b) of this section. Unfired steam boilers must be fitted with an efficient... § 54.15-15. Unfired steam boilers must be constructed in accordance with this part other than when...

  2. Epigenetic silencing of CYP24 in the tumor microenvironment

    Science.gov (United States)

    Johnson, Candace S.; Chung, Ivy; Trump, Donald L.

    2010-01-01

    Calcitriol (1,25 dihydroxycholecalciferol) has significant antitumor activity in vitro and in vivo in a number of tumor model systems. We developed a system for isolation of fresh endothelial cells from tumors and Matrigel environments which demonstrate that CYP24, the catabolic enzyme involved in vitamin D signaling, is epigenetically silenced selectively in tumor-derived endothelial cells (TDEC). TDEC maintain phenotypic characteristics which are distinct from endothelial cells isolated from normal tissues and from Matrigel plugs (MDEC). In TDEC, calcitriol induces G0/G1 arrest, modulates p27 and p21, and induces apoptotic cell death and decreases P-Erk and P-Akt. In contrast, endothelial cells isolated from normal tissues and MDEC are unresponsive to calcitriol-mediated anti-proliferative effects despite intact signaling through the vitamin D receptor (VDR). In TDEC, which is sensitive to calcitriol, the CYP24 promoter is hypermethylated in two CpG island regions located at the 5′end; this hypermethylation may contribute to gene silencing of CYP24. The extent of methylation in these two regions is significantly less in MDEC. Lastly, treatment of TDEC with a DNA methyltransferase inhibitor restores calcitriol-mediated induction of CYP24 and resistance to calcitriol. These data suggest that epigenetic silencing of CYP24 modulates cellular responses to calcitriol. PMID:20304059

  3. Hybrid silencers with micro-perforated panels and internal partitions.

    Science.gov (United States)

    Yu, Xiang; Cheng, Li; You, Xiangyu

    2015-02-01

    A sub-structuring approach, along with a unit cell treatment, is proposed to model expansion chamber silencers with internal partitions and micro-perforated panels (MPPs) in the absence of internal flow. The side-branch of the silencer is treated as a combination of unit cells connected in series. It is shown that, by connecting multiple unit cells with varying parameters, the noise attenuation bandwidth can be enlarged. With MPPs, the hybrid noise attenuation mechanism of the silencer is revealed. Depending on the size of the perforation hole, noise attenuation can be dominated by dissipative, reactive, or combined effects together. For a broadband sound absorption, the hole size, together with the perforation ratio and other parameters, can be optimized to strike a balance between the dissipative and reactive effect, for ultimately achieving the desired noise attenuation performance within a prescribed frequency region. The modular nature of the proposed formulation allows doing this in a flexible, accurate, and cost effective manner. The accuracy of the proposed approach is validated through comparisons with finite element method and experiments.

  4. Meiosis and retrotransposon silencing during germ cell development in mice.

    Science.gov (United States)

    Ollinger, Rupert; Reichmann, Judith; Adams, Ian R

    2010-03-01

    In mammals, germ cells derive from the pluripotent cells that are present early in embryogenesis, and then differentiate into male sperm or female eggs as development proceeds. Fusion between an egg and a sperm at fertilization allows genetic information from both parents to be transmitted to the next generation, and produces a pluripotent zygote to initiate the next round of embryogenesis. Meiosis is a central event in this self-perpetuating cycle that creates genetic diversity by generating new combinations of existing genetic alleles, and halves the number of chromosomes in the developing male and female germ cells to allow chromosome number to be maintained through successive generations. The developing germ cells also help to maintain genetic and chromosomal stability through the generations by protecting the genome from excessive de novo mutation. Several mouse mutants have recently been characterised whose germ cells exhibit defects in silencing the potentially mutagenic endogenous retroviruses and other retrotransposons that are prevalent in mammalian genomes, and these germ cells also exhibit defects in progression through meiosis. Here we review how mouse germ cells develop and proceed through meiosis, how mouse germ cells silence endogenous retroviruses and other retrotransposons, and discuss why silencing of endogenous retroviruses and other retrotransposons may be required for meiotic progression in mice.

  5. The Application of Coconut Fiber as Dissipative Silencer

    Science.gov (United States)

    Madlan, M. A.; Ghazali, M. I.; Zaman, I.; Kasron, M. Z.; Ying, T. C.

    2017-01-01

    Heat ventilation air conditioning system (HVAC) is one of the ducting systems that broadly applied in the building. There are HVAC silencers in the market, however the sound absorptive material commonly used is mineral wool. In this research study, a sound absorptive material made of coconut fiber was tested to identify its performance as a potential replacement of green material for ducting silencer. The experiment was carried out in a testing apparatus that follows the BS EN ISO 11691:2009 standard. Different configurations of sound absorptive material and contents of coconut fiber were investigated in the study. The trend of insertion loss at 1/3 octave frequency was identified where at frequency below 3000Hz, the insertion loss of dissipative silencer is observed high at certain frequency with a very narrow range. At 3000Hz, the insertion loss of 4dB to 6dB is constant until 4000Hz and drops until 5000Hz before it increases again steadily up to 13dB at 10000Hz. A similar trend was observed for different configuration of sound absorptive material. Despite the configuration different, the outcome shows that the insertion loss is increasing with higher content of coconut fiber.

  6. Right to Silence%沉默权论要

    Institute of Scientific and Technical Information of China (English)

    朱华

    2012-01-01

    Right to silence in the criminal procedure law is a human rights protection system that can basically make a balance between the public authority of the State and the right to freedom of statement of suspects and defendants.Dealing well with the relationship between the right to silence and the right of questioning can help to improve objectivity and accuracy of criminal cases and reduce trumped-up cases caused by torture.The relative implied right to silence is the result of the development of modern civilization and the rule of law,and conforms to China's basic national condition and current status.%刑事诉讼法中的沉默权,是国家公权力与嫌疑人、被告人陈述自由权得到基本平衡的人权保障制度。处理好沉默权与讯问权的关系,有利于提高刑事案件的客观性和准确性,减少因刑讯逼供产生的冤假错案,默示的相对沉默权,是现代文明法治发展的结果,符合我国基本国情及现状。

  7. Enhancing chemotherapy response with Bmi-1 silencing in ovarian cancer.

    Directory of Open Access Journals (Sweden)

    Enfeng Wang

    Full Text Available Undoubtedly ovarian cancer is a vexing, incurable disease for patients with recurrent cancer and therapeutic options are limited. Although the polycomb group gene, Bmi-1 that regulates the self-renewal of normal stem and progenitor cells has been implicated in the pathogenesis of many human malignancies, yet a role for Bmi-1 in influencing chemotherapy response has not been addressed before. Here we demonstrate that silencing Bmi-1 reduces intracellular GSH levels and thereby sensitizes chemoresistant ovarian cancer cells to chemotherapeutics such as cisplatin. By exacerbating ROS production in response to cisplatin, Bmi-1 silencing activates the DNA damage response pathway, caspases and cleaves PARP resulting in the induction apoptosis in ovarian cancer cells. In an in vivo orthotopic mouse model of chemoresistant ovarian cancer, knockdown of Bmi-1 by nanoliposomal delivery significantly inhibits tumor growth. While cisplatin monotherapy was inactive, combination of Bmi-1 silencing along with cisplatin almost completely abrogated ovarian tumor growth. Collectively these findings establish Bmi-1 as an important new target for therapy in chemoresistant ovarian cancer.

  8. Virus-induced Gene Silencing in Eggplant (Solanum melongena)

    Institute of Scientific and Technical Information of China (English)

    HaipingLiu; Daqi Fu; Benzhong Zhu; Huaxue Yan; Xiaoying Shen; Jinhua Zuo; Yi Zhu; Yunbo Luo

    2012-01-01

    Eggplant (Solanum melongena) is an economically important vegetable requiring investigation into its various genomic functions.The current limitation in the investigation of genomic function in eggplant is the lack of effective tools available for conducting functional assays.Virus-induced gene silencing (VIGS) has played a critical role in the functional genetic analyses.In this paper,TRV-mediated VIGS was successfully elicited in eggplant.We first cloned the CDS sequence of PDS (PHYTOENE DESATURASE) in eggplant and then silenced the PDS gene.Photo-bleaching was shown on the newly-developed leaves four weeks after agroinoculation,indicating that VIGS can be used to silence genes in eggplant.To further illustrate the reliability of VIGS in eggplant,we selected Chl H,Su and CLA1 as reporters to elicit VIGS using the high-pressure spray method.Suppression of Chl H and Su led to yellow leaves,while the depletion of CLA1 resulted in albino.In conclusion,four genes,PDS,Chl H,Su (Sulfur),CLA1,were down-regulated significantly by VIGS,indicating that the VIGS system can be successfully applied in eggplant and is a reliable tool for the study of gene function.

  9. Silencing Deafness: Displacing Disability in the Nineteenth Century

    Directory of Open Access Journals (Sweden)

    Esme Cleall

    2015-03-01

    Full Text Available This article traces the way in which the language of displacement and silence were used in nineteenth-century discussions of deafness and connects this tendency to the marginalised place deaf experience occupies historically. Throughout the nineteenth century, a period which saw the consolidation of ‘the deaf and dumb’ as a social category, the word ‘forgetting’ crept into numerous discussions of deafness by both deaf and hearing commentators. Some, such as the educationalist Alexander Graeme Bell, were overt in their desire to forget deafness, demanding disability was ‘bred out’ and deaf culture condemned to the forgotten past. Others used the term ambivalently and sometimes metaphorically discussing the deaf as ‘forgotten’ by society, and ‘children of silence’. Some even pleaded that people who were deaf were not forgotten. But, though varied, the use of the imagery of forgetting and silence to evoke deafness is recurrent, and may, therefore, be seen to reveal something about how deaf experience can be approached as a displacement where deafness was spatially and imaginatively marginalised. I argue that one of the consequences of the conceptual framing of deafness through the language of forgetting was actively to silence deafness and to neutralise the idea that disability should be marginal and could be forgotten.

  10. Frequency steerable acoustic transducers

    Science.gov (United States)

    Senesi, Matteo

    Structural health monitoring (SHM) is an active research area devoted to the assessment of the structural integrity of critical components of aerospace, civil and mechanical systems. Guided wave methods have been proposed for SHM of plate-like structures using permanently attached piezoelectric transducers, which generate and sense waves to evaluate the presence of damage. Effective interrogation of structural health is often facilitated by sensors and actuators with the ability to perform electronic, i.e. phased array, scanning. The objective of this research is to design an innovative directional piezoelectric transducer to be employed for the localization of broadband acoustic events, or for the generation of Lamb waves for active interrogation of structural health. The proposed Frequency Steerable Acoustic Transducers (FSATs) are characterized by a spatial arrangement of active material which leads to directional characteristics varying with frequency. Thus FSATs can be employed both for directional sensing and generation of guided waves without relying on phasing and control of a large number of channels. The analytical expression of the shape of the FSATs is obtained through a theoretical formulation for continuously distributed active material as part of a shaped piezoelectric device. The FSAT configurations analyzed in this work are a quadrilateral array and a geometry which corresponds to a spiral in the wavenumber domain. The quadrilateral array is experimentally validated, confirming the concept of frequency-dependent directionality. Its limited directivity is improved by the Wavenumber Spiral FSAT (WS-FSAT), which, instead, is characterized by a continuous frequency dependent directionality. Preliminary validations of the WS-FSAT, using a laser doppler vibrometer, are followed by the implementation of the WS-FSAT as a properly shaped piezo transducer. The prototype is first used for localization of acoustic broadband sources. Signal processing

  11. Acoustic Mechanical Feedthroughs

    Science.gov (United States)

    Sherrit, Stewart; Walkemeyer, Phillip; Bao, Xiaoqi; Bar-Cohen, Yoseph; Badescu, Mircea

    2013-01-01

    Electromagnetic motors can have problems when operating in extreme environments. In addition, if one needs to do mechanical work outside a structure, electrical feedthroughs are required to transport the electric power to drive the motor. In this paper, we present designs for driving rotary and linear motors by pumping stress waves across a structure or barrier. We accomplish this by designing a piezoelectric actuator on one side of the structure and a resonance structure that is matched to the piezoelectric resonance of the actuator on the other side. Typically, piezoelectric motors can be designed with high torques and lower speeds without the need for gears. One can also use other actuation materials such as electrostrictive, or magnetostrictive materials in a benign environment and transmit the power in acoustic form as a stress wave and actuate mechanisms that are external to the benign environment. This technology removes the need to perforate a structure and allows work to be done directly on the other side of a structure without the use of electrical feedthroughs, which can weaken the structure, pipe, or vessel. Acoustic energy is pumped as a stress wave at a set frequency or range of frequencies to produce rotary or linear motion in a structure. This method of transferring useful mechanical work across solid barriers by pumping acoustic energy through a resonant structure features the ability to transfer work (rotary or linear motion) across pressure or thermal barriers, or in a sterile environment, without generating contaminants. Reflectors in the wall of barriers can be designed to enhance the efficiency of the energy/power transmission. The method features the ability to produce a bi-directional driving mechanism using higher-mode resonances. There are a variety of applications where the presence of a motor is complicated by thermal or chemical environments that would be hostile to the motor components and reduce life and, in some instances, not be

  12. The 700{sup o}C steam turbine power plant status of development and outlook

    Energy Technology Data Exchange (ETDEWEB)

    Edelmann, Heiner; Effert, Martin; Wieghardt, Kai; Kirchner, Holger

    2007-08-15

    This paper appraises the current development status of the 700{sup o}C steam power plant under consideration of process optimisation as well as design aspects of the steam turbine and steam generator. The results for a compact arrangement of the steam turbine and steam generator are also presented. Based on a cycle analysis, a net efficiency between 49.3% and 51.4% can be achieved with the 700{sup o}C steam power plant depending on the implementation and based on an inland plant site. No competing development activities for the 700{sup o}C steam power plant are known from the USA or Japan.

  13. Taming Acoustic Cavitation

    CERN Document Server

    Rivas, David Fernandez; Enriquez, Oscar R; Versluis, Michel; Prosperetti, Andrea; Gardeniers, Han; Lohse, Detlef

    2012-01-01

    In this fluid dynamics video we show acoustic cavitation occurring from pits etched on a silicon surface. By immersing the surface in a liquid, gas pockets are entrapped in the pits which upon ultrasonic insonation, are observed to shed cavitation bubbles. Modulating the driving pressure it is possible to induce different behaviours based on the force balance that determines the interaction among bubbles and the silicon surface. This system can be used for several applications like sonochemical water treatment, cleaning of surfaces with deposited materials such as biofilms.

  14. Wind turbine acoustics

    Science.gov (United States)

    Hubbard, Harvey H.; Shepherd, Kevin P.

    1990-12-01

    Available information on the physical characteristics of the noise generated by wind turbines is summarized, with example sound pressure time histories, narrow- and broadband frequency spectra, and noise radiation patterns. Reviewed are noise measurement standards, analysis technology, and a method of characterizing wind turbine noise. Prediction methods are given for both low-frequency rotational harmonics and broadband noise components. Also included are atmospheric propagation data showing the effects of distance and refraction by wind shear. Human perception thresholds, based on laboratory and field tests, are given. Building vibration analysis methods are summarized. The bibliography of this report lists technical publications on all aspects of wind turbine acoustics.

  15. Features of steam turbine cooling by the example of an SKR-100 turbine for supercritical steam parameters

    Science.gov (United States)

    Arkadyev, B. A.

    2015-10-01

    Basic principles of cooling of high-temperature steam turbines and constructive solutions used for development of the world's first cooled steam turbine SKR-100 (R-100-300) are described. Principal differences between the thermodynamic properties of cooling medium in the steam and gas turbines and the preference of making flow passes of cooled cylinders of steam turbines as reactive are shown. Some of its operation results and their conclusions are given. This turbine with a power of 100 MW, initial steam parameters approximately 30 MPa and 650°C, and back pressure 3 MPa was made by a Kharkov turbine plant in 1961 and ran successfully at a Kashira GRES (state district power plant) up to 1979, when it was taken out of use in a still fully operating condition. For comparison, some data on construction features and operation results of the super-high pressure cylinder of steam turbines of American Philo 6 (made by General Electric Co.) and Eddystone 1 (made by Westinghouse Co.) power generating units, which are close to the SKR-100 turbine by design initial steam parameters and the implementation time, are given. The high operational reliability and effectiveness of the cooling system that was used in the super-high pressure cylinder of the SKR-100 turbine of the power-generating unit, which were demonstrated in operation, confirms rightfulness and expediency of principles and constructive solutions laid at its development. As process steam temperatures are increased, the realization of the proposed approach to cooling of multistage turbines makes it possible to limit for large turbine parts the application of new, more expensive high-temperature materials, which are required for making steam boilers, and, in some cases, to do completely away with their utilization.

  16. Acoustic Ground-Impedance Meter

    Science.gov (United States)

    Zuckerwar, A. J.

    1983-01-01

    Helmoltz resonator used in compact, portable meter measures acoustic impedance of ground or other surfaces. Earth's surface is subject of increasing acoustical investigations because of its importance in aircraft noise prediction and measurment. Meter offers several advantages. Is compact and portable and set up at any test site, irrespective of landscape features, weather or other environmental condition.

  17. Propagation of Ion Acoustic Perturbations

    DEFF Research Database (Denmark)

    Pécseli, Hans

    1975-01-01

    Equations describing the propagation of ion acoustic perturbations are considered, using the assumption that the electrons are Boltzman distributed and isothermal at all times. Quasi-neutrality is also considered.......Equations describing the propagation of ion acoustic perturbations are considered, using the assumption that the electrons are Boltzman distributed and isothermal at all times. Quasi-neutrality is also considered....

  18. Acoustic Center or Time Origin?

    DEFF Research Database (Denmark)

    Staffeldt, Henrik

    1999-01-01

    The paper discusses the acoustic center in relation to measurements of loudspeaker polar data. Also, it presents the related concept time origin and discusses the deviation that appears between positions of the acoustic center found by wavefront based and time based measuring methods....

  19. Habituation of the acoustic and the tactile startle responses in mice: two independent sensory processes.

    Science.gov (United States)

    Pilz, Peter K D; Carl, Thomas D; Plappert, Claudia F

    2004-10-01

    To test whether habituation is specific to the stimulus modality, the authors analyzed cross-habituation between the tactile startle response' (TSR) and the acoustic startle response (ASR). The acoustic artifacts of airpuffs used to elicit the TSR were reduced by using a silencer and were effectively masked by background noise of 90-100 dB sound-pressure level. ASR was elicited by 14-kHz tones. TSR and ASR habituated in DBA and BALB mice: both the TSR and ASR habituated to a greater extent in DBA mice than in BALB mice. In both strains, habituation of the TSR did not generalize to the ASR, and vice versa. From this, the authors concluded that habituation of startle is located in the sensory afferent branches of the pathway.

  20. Acoustic Absorption in Porous Materials

    Science.gov (United States)

    Kuczmarski, Maria A.; Johnston, James C.

    2011-01-01

    An understanding of both the areas of materials science and acoustics is necessary to successfully develop materials for acoustic absorption applications. This paper presents the basic knowledge and approaches for determining the acoustic performance of porous materials in a manner that will help materials researchers new to this area gain the understanding and skills necessary to make meaningful contributions to this field of study. Beginning with the basics and making as few assumptions as possible, this paper reviews relevant topics in the acoustic performance of porous materials, which are often used to make acoustic bulk absorbers, moving from the physics of sound wave interactions with porous materials to measurement techniques for flow resistivity, characteristic impedance, and wavenumber.