WorldWideScience

Sample records for acido betulinico obtido

  1. Enfermedad acido-peptica

    OpenAIRE

    Echavarría, Hector Raúl; Fundación Valle de Lili; Mendoza, Alfredo

    1999-01-01

    ¿En qué consisten las enfermedades que se denominan con el término genérico de enfermedad acido-péptica?/ ¿Cuáles son sus síntomas?/ ¿Cómo se comporta la enfermedad acido-péptica y cuáles son sus causas?/ ¿Cómo se evitan estas enfermedades y como se tratan?

  2. Azione citodifferenziante ed antitumorale dell'acido ellagico

    OpenAIRE

    Vanella, Luca

    2011-01-01

    Il lavoro ha lo scopo di valutare l'effetto citodifferenziante ed antitumorale dell'acido ellagico in tre diverse linee cellulari prostatiche a diverso grado di invasivita' (DU145, LnCap, BPH1). I risultati della Cromogranina A e della P75 NGRF, ottenuti mediante immunofluorescenza, evidenziano un'azione citodifferenziante dell'acido ellagico in maniera dose dipendente. Inoltre i risultati dimostrano come l'acido ellagico abbia la capacita' di ridurre, in maniera dose dipendente, sia l'espres...

  3. Cross linkage studies with the membranes of the vesicular stomatitis virus using radioactive 4-acido and 5-acido palmitic acid

    International Nuclear Information System (INIS)

    Verfondern, M.

    1983-01-01

    In the study described here the spatial arrangement of lipids and proteins in the VS virus was investigated on the basis of the covalent cross linkage technique. The formation of such cross linkages is brought about by the action of photosensitive acidosubstituted lipids, which permit acido functions to be introduced into a membrane in a previously defined position. Subsequently, photolysis helps to trigger the generation of radioactive nitrenes that react with the proteins and lipids in their immediate vicinity in a direct and non-selective way. The findings revealed by this study have raised questions as to the possibility of lipid-protein and lipid-lipid interactions, which is also discussed. (orig./MG) [de

  4. Effect of glycerin and formic acid in the efficiency of deposit on Zn-Ni, obtained by electrodeposition; Efeito da glicerina e do acido formico na eficiencia de deposito da liga Zn-Ni, obtido atraves de eletrodeposicao

    Energy Technology Data Exchange (ETDEWEB)

    Pedroza, G.A.G.; Souza, C.A.C.; Lima, L.R.P.A.; Ferreira, D.M. [Universidade Federal da Bahia - Escola Politecnica, BA (Brazil)

    2010-07-01

    Additives are added to the electrodeposition of metal coatings to improve the characteristics of the deposit. However, the objective was to investigate the effect of adding glycerin and formic acid in the deposition efficiency and deposit structure of zinc-nickel alloy obtained by electrodeposition. The depositions were made at a galvanostatic current density of 10 mA/cm{sup 2} to obtain a deposit of about 5 mm in thickness. The deposition efficiency was determined through measures of mass, chemical composition of the deposit in the presence and absence of additives was examined by X-ray Spectrometer Fluorescence (XRF) and surface characterization of coatings was performed by Scanning Electron Microscopy (SEM). The high levels of glycerin (0,07 M) and formic acid (0,26 M) in bath deposition increased the deposition efficiency of around 10% to 12% by mass, respectively. (author)

  5. Interchange reaction of disulfides and denaturation of oxytocin by copper(II)/ascorbic acid/O2 system.

    Science.gov (United States)

    Inoue, H; Hirobe, M

    1987-05-29

    The interchange reaction of disulfides was caused by the copper(II)/ascorbic acid/O2 system. The incubation of two symmetric disulfides, L-cystinyl-bis-L-phenylalanine (PP) and L-cystinyl-bis-L-tyrosine (TT), with L-ascorbic acid and CuSO4 in potassium phosphate buffer (pH 7.2, 50 mM) resulted in the formation of an asymmetric disulfide, L-cystinyl-L-phenylalanine-L-tyrosine (PT), and the final ratio of PP:PT:TT was 1:2:1. As the reaction was inhibited by catalase and DMSO only at the initial time, hydroxyl radical generated by the copper(II)/ascorbic acid/O2 system seemed to be responsible for the initiation of the reaction. Oxytocin and insulin were denatured by this system, and catalase and DMSO similarly inhibited these denaturations. As the composition of amino acids was unchanged after the reaction, hydroxyl radical was thought to cause the cleavage and/or interchange reaction of disulfides to denature the peptides.

  6. Estudo do comportamento acido-base de proteinas no sistema DMSO-Agua

    OpenAIRE

    Ivo Milton Raimundo Junior

    1989-01-01

    Resumo: Neste trabalho foi estudado o comportamento ácido-base da lisozima e ovalbumina no sistema DMSO-água (7,0: 0,8 ml) através de titulações termométrica catalítica (TTC) e potenciométrica. Na TTC foi utilizada acrilonitrila (4,0 ml) como indicador termométrico, sendo determinados 23,6±0,7 e 47,6±0,6 .grupos ácidos por moI de lisozima e ovalbumina, respectivamente. A comparação desses resultados com os obtidos por titulação potenciométrica das proteínas desnaturadas em uréia mostrou que o...

  7. Acido-basic control of the thermoelectric properties of poly(3,4-ethylenedioxythiophene)tosylate (PEDOT-Tos) thin films

    DEFF Research Database (Denmark)

    Khan, Zia Ullah; Bubnova, Olga; Jafari, Mohammad Javad

    2015-01-01

    study the variation in the thermoelectric properties by a simple acido-basic treatment. The emphasis of this study is to elucidate the chemical changes induced by acid (HCl) or base (NaOH) treatment in PEDOT-Tos thin films using various spectroscopic and structural techniques. We could identify changes...... in the nanoscale morphology due to anion exchange between tosylate and Cl- or OH-. But, we identified that changing the pH leads to a tuning of the oxidation level of the polymer, which can explain the changes in thermoelectric properties. Hence, a simple acid-base treatment allows finding the optimum...

  8. Peracetic acid as disinfectant of municipal wastewaters; L'acido peracetico nella disinfezione dei reflui urbani

    Energy Technology Data Exchange (ETDEWEB)

    Funari, E. [Istituto Superiore di Sanita' , Laboratorio di Igiene Ambientale, Reparto di Medicina Ambientale, Rome (Italy); Lopez, A. [Consiglio Nazionale delle Ricerche, Istituto di Ricerca sulle Acque, Reparto di Chimica e Tecnologia delle Acque, Bari (Italy)

    2000-09-01

    Based on the currently available literature, this paper is aimed at providing a sort of the <> on the use of peracetic acid (C{sub 3}COOOH{identical_to} Paa) as disinfectant of biologically treated municipal wastewater: the growing interest for this substance, used since many years in other sectors (e.g., food-industry, breweries, etc.) is mainly due to the claimed limited formation, if any, of harmful disinfecting by-products (Dbp) with consequent lack of toxicity in Paa treated wastewaters. Such features are just the opposite of those of chlorine, i.e. the most used disinfectant for municipal wastewater. During chlorine-disinfecting, in fact, numerous harmful organo-chlorinated Dbp are formed and, accordingly, the toxicity of chlorinated effluents results very high. In spite of the above reported <> properties of Paa, its use at large scale facilities is still restricted and this not only because of its costs but even for the limited knowledge concerning: the actual disinfecting effectiveness towards different pathogens, the nature and the toxicological properties of its potential Dbp, and the disinfecting performances at large scale facilities. The present paper, besides reporting an extensive and useful collection of references concerning Paa, provides a critical review on the current knowledge regarding specific Paa features such as: its disinfecting effectiveness towards different pathogenic micro-organisms, the nature and the toxicity of its disinfecting by-products, the environmental impact of Paa treated effluents, and the operative conditions used at large scale wastewater treatment plants. [Italian] Il presente lavoro, basandosi sui dati disponibili in letteratura, si propone di fare il punto sull'impiego dell'acido peracetico (CH{sub 3}COOOH{identical_to} PAA) come disinfettante di reflui urbani depurati. Il crescente interesse nei confronti di questa sostenza, gia' nota come disinfettante in

  9. Modificación estructural de Poli(Acido Láctico) (PLA) mediante extrusión reactiva: estudio preliminar en mezclador interno escala laboratorio

    OpenAIRE

    Espejo, Lucas

    2011-01-01

    Doble titulació Este proyecto, realizado en Centro Catalá del Plástico y por lo tanto implicado en el dominio de los polímeros, pretende preparar y caracterizar sistemas de Acido Poli(Láctico) (PLA) con extensores de cadena (CE) que serían adecuados y eficientes para el sector de los envases. Los procesos tal la Inyección y/o Extrusión empleando el PLA en este campo se enfrentan a la pérdida de las propiedades termo-mecánicas. Es el resultado de la degradación térmica y h...

  10. Wastewater disinfection with peracetic acid and UV; La disinfezione di acque reflue con acido peracetico e raggi ultravioletti

    Energy Technology Data Exchange (ETDEWEB)

    Caretti, C.; Lubello, C. [Florence Univ., Florence (Italy). Dipt. di Ingegneria Civile

    2001-06-01

    Was investigated the synergy between UV and peracetic acid (PAA) through a five months on-site experimental study in a pilot plant fed by the secondary effluent of the central wastewater treatment plant of Pistoia, Italy. This experiment is a part of a larger research project on advanced treatment for municipal wastewater reuse in agriculture. Because of Italy's strict limits on unrestricted wastewater reuse in agriculture (2 CFU total coliform/100 ml), a very high degree of disinfection is necessary. In the investigated experimental conditions, it has been impossible to meet such values through an exclusive use of UV irradiation (the UV unit reaches at most 4 Log inactivation). Low levels of PAA greatly enhance the decline of indicator levels, but higher unsustainable doses are required to hit the Italian limit. Through a poor amount of information on the subject was available in literature, it was tried to find out how the disinfection efficiency could improve by simultaneously using UV and PAA. It was found out that a combined treatment is satisfactory and that it is more advantage of the hydroxyl radicals formation due to the PAA photo lysis. The application of 2 ppm of PAA with an UV dose of 192 mWscm{sup -}2 is enough to meet the Italian limit. [Italian] Nel presente articolo si riportano i risultati di uno studio sulla sinergia tra acido peracetico (PAA) e raggi ultravioletti nella disinfezione delle acque reflue secondarie; le prove sono state effettuate su scala pilota, presso l'impianto centrale di Pistoia. Tale sperimentazione fa parte di un piu' ampio progetto di ricerca sulla possibilita' di riutilizzare le acque reflue a scopo irriguo; per rispettare i limiti estremamente stringenti imposti dalla normativa italiana per l'irrigazione (2 CFU Coliformi totali/100 ml, nel caso di irrigazione illimitata), e' necessario garantire efficienze di disinfezione molto elevate. Nelle condizioni sperimentali considerate, non e

  11. Hydrogen sulfide corrosion of weld regions in API X52 steel; Corrosion por acido sulfhidrico de las regiones de soldadura en acero API X52

    Energy Technology Data Exchange (ETDEWEB)

    Arenas-Martinez, L.F [Universidad Autonoma de Coahuila, Coahuila (Mexico)]. E-mail: fernando.arenas@uadec.edu.mx; Garcia-Cerecero, G. [Corporacion Mexicana de Investigacion en Materiales S.A. de C.V., Saltillo, Coahuila (Mexico)

    2012-10-15

    The corrosion behavior of gas metal arc welding (GMAW) regions has been studied using potentiodynamic polarization and polarization resistance (LPR) techniques. Experiments were conducted in hydrogen sulfide (H{sub 2}S)-containing brine and in H{sub 2}S-free brine. Welds were made on API 5L X52 steel. Due to differences in their microstructure, chemical composition and residual stress level, weld regions exhibited different responses under H{sub 2}S corrosion. Base metal exhibited the highest corrosion rate (CR) and the most cathodic corrosion potential. [Spanish] Se estudio el comportamiento ante la corrosion de las regiones de soldadura de un cordon realizado por arco metalico con gas (GMAW) sobre un acero grado API X52 mediante las tecnicas de polarizacion potencio dinamica y resistencia a la polarizacion (LPR). Los experimentos se realizaron utilizando salmuera con 300 ppm de acido sulfhidrico (H{sub 2}S) y salmuera libre de H{sub 2}S como electrolitos. Debido a las diferencias en su microestructura, composicion quimica y el nivel de esfuerzos residuales, las regiones de soldadura mostraron diferentes respuestas a la corrosion por H{sub 2}S. El metal base exhibio la velocidad de corrosion (VC) mas alta y el potencial de corrosion mas catodico.

  12. ANALISIS DEL CO-TRATAMIENTO PASIVO DE AGUAS RESIDUALES MUNICIPALES Y DRENAJE ACIDO DE MINAS EN CERRO RICO DE POTOSÍ, BOLIVIA

    Directory of Open Access Journals (Sweden)

    William H.J. Strosnider

    2015-01-01

    Full Text Available El drenaje acido de minas (DAM es un problema a nivel mundial. El co-tratamiento pasivo de DAM con aguas residuales municipales (ARM es una manera efectiva y de bajo costo que utiliza los nutrientes de ARM para tratar las concentraciones de metales y sulfato en DAM. Cerro Rico de Potosí, Bolivia es una de las grandes ciudades mineras en el mundo que tiene muchos problemas con el DAM. El objetivo de este estudio fue determinar velocidades de reacción de Al, Fe, Mn, Zn, y otros metales en DAM provenientes de un flujo de agua en Cerro Rico usando un sistema reactor de tres etapas. El DAM tenía un pH de 3.58, acidez de 1080 mg/L equivalente a CaCO3 conteniendo concentraciones de 12, 68, 17, y 550 mg/L de Al, Fe, Mn y Zn respectivamente. Las velocidades de reacción de Al, Fe, Mn y Zn fueron de 1.43, 2.09, 0.01 y 0.10 d-1, respectivamente.

  13. ESTUDIO DE LA ADSORCIÓN DE PROTEÍNAS SOBRE SUPERFICIES DE ACIDO POLILÁCTICO MEDIANTE TÉCNICAS GRAVIMÉTRICAS Y ELECTROQUÍMICAS

    Directory of Open Access Journals (Sweden)

    HUGO ARMANDO ESTUPIÑAN DURAN

    2011-01-01

    Full Text Available Metodos electroquimicos fueron utilizados para promover y evaluar la adsorcion orientada de albumina y colageno sobre superficies polimericas de acido polilactico (PLA mediante la aplicacion de un sobrepotencial anodico en un rango de 0 V a 0,45 V. La adsorcion fueestudiada usando mediciones simultaneas de espectroscopia de impedancia electroquimica (EIE y microbalanza de cristal de cuarzo (QCM, en un rango de temperaturas de 25°C a 45°C, con variaciones en proteina entre 5 y 20 ¿Êg/ml en solucion buffer de fosfato de pH 7,4. Con el aumento de la concentracion de proteinas en el electrolito, disminuye la resistencia a la transferencia de carga, exhibiendo asi una mayor adsorcion sobre la superficie, ademas de aumentar la magnitud de los cambios de masa. Se mejoro la hidrofilicidad del recubrimiento, mostrando una mayor afinidad con las soluciones de colageno y por lo tanto un aumento en la biocompatibilidad debido a la activacion superficial.

  14. ESTUDO COMPARATIVO ENTRE OS ÍNDICES NDVI OBTIDOS A PARTIR DOS SENSORES LANDSAT 5 - TM E RESOURCESAT - LISS III

    Directory of Open Access Journals (Sweden)

    Cesar Vinícius Mendes Nery

    2013-07-01

    Full Text Available A importância das imagens de sensoriamento remoto para o monitoramento da cobertura vegetal é algo inegável. Por mais de três décadas a série Landsat tem fornecido imagens da terra, porém a partir de novembro de 2011 o satélite interrompeu a disponibilização de suas imagens para o monitoramento ambiental. Uma das alternativas de imagens ao Landsat têm sido as imagens do sensor LISS III a bordo do satélite indiano Resourcesat 1. O presente trabalho tem como área de estudo o município de Janaúba, por estar em uma área de transição de dois biomas, e o mesmo tem por objetivo comparar os dois sensores, o sensor TM que se encontra a bordo do satélite Landsat 5 e o sensor LISS III a bordo do satélite Resourcesat 1. Para esse estudo comparativo as imagens foram adquiridas do site do Instituto Nacional de Pesquisas Espaciais (INPE e seus valores de níveis digitais (ND foram convertidos em reflectância com correção atmosférica utilizando o método de correção DOS. Amostras de pixels das imagens índice foram coletadas para o estudo de correlação e ajuste de uma equação linear por meio da técnica de regressão. Utilizando a equação ajustada foram gerados dois mapas temáticos de ambos os sensores, sendo os mesmos comparados pelo teste estatístico Kappa. Os resultados mostraram uma forte correlação entre os valores de NDVI (0,81, sendo possível o ajuste de uma equação linear que expresse a forma dessa relação. O sensor TM, superestimou os valores de NDVI em relação ao sensor LISS III (Inclinação de 1,1035. O valor de Kappa para os mapas temáticos obtidos foi de 0,5894 e o índice de acerto foi de 98,81%, o que mostra uma boa similaridade entre eles. O sensor LISS III pode ser perfeitamente utilizado como alternativa ao Landsat 5.

  15. Differences between in vitro and in vivo obtained schistosomules Diferenças entre esquistossômulos obtidos in vitro e in vivo

    Directory of Open Access Journals (Sweden)

    Alan L. Melo

    1990-04-01

    Full Text Available The injection of cercariae of Schistosoma mansoni into the peritoneal cavity of naive mice induces cell adhesion to these larvae, and this adherence sharply decreases when the infecting larva changes to schistosomule. This procedure was used to detect differences between schistosomules obtained in vivo and in vitro. Reinoculation of schistosomules obtained in vivo into the peritoneal cavity of mice did not trigger cell adhesion. In contrast, adherent cells were found in 4 and 24-hour-in vitro schistosomules. Our data on schistosomules obtained in vitro indicate that more than 24 hours are needed for complete remotion of molecules involved in the phenomenon of cell adhesion.Injeção de cercárias de Schistosoma mansoni na cavidade peritoneal de camundongos normais induz adesão celular a estas larvas. Esta aderência diminui acentuadamente quando as larvas infectantes se transformam em esquistossômulos. Este procedimento foi usado para detectar diferenças entre esquistossômulos obtidos in vivo e in vitro. A reinoculação de esquistossômulos obtidos in vivo na cavidade peritoneal de camundongos não acarreta adesão celular. Por outro lado, células aderentes foram encontradas em esquistossômulos obtidos in vitro (4 e 24 horas, respectivamente. Nossos dados referentes a esquistossômulos obtidos in vitro indicam que mais de 24 horas são necessárias para a completa remoção de moléculas envolvidas no fenômeno de adesão celular.

  16. Determination of the load state of lead-acid batteries using neural networks; Determinacion del estado de carga de baterias plomo-acido utilizando redes neuronales

    Energy Technology Data Exchange (ETDEWEB)

    Cristin V, Miguel A; Ortega S, Cesar A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-07-01

    The charge of lead-acid batteries (LAB), as in any other type of batteries, consists of replacing the energy consumed during the discharge. Nevertheless, as no physical or chemical process is good enough to totality recharge a battery, it is necessary to supply to it more than the 100% of the energy demanded during its discharge. A critical factor to make a suitable load control of the batteries is to determine its own state of load. That is to say, to have an efficient load control, it is necessary to count on means that allow to accurately determining the residual capacity of the battery to deliver load. This one is the one of the aspects of greater interest in the research centers around world. For this reason, in this work it was pretended to develop a calculation algorithm of the state of load of batteries based on a fuzzy-neural network that could calculate the state of load without using the battery current as an input. This is because one of the main problems for the designers of battery load controllers is the correct supervision of the current that circulates around the system in all the rank of operation of the same one because the sensors do not have a linear behavior. [Spanish] La recarga de baterias plomo-acido (BPA), como cualquier otro tipo de baterias, consiste en reponer la energia consumida durante la descarga. Sin embargo, como ningun proceso fisico o quimico es lo bastante eficiente para recargar a totalidad una bateria, es necesario suministrarle mas del 100% de la energia demandada durante su descarga. Un factor critico para realizar un adecuado control de carga de las baterias, es determinar su propio estado de carga. Es decir, para tener un control de carga eficiente, es necesario contar con un medio que permita determinar con precision la capacidad remanente de la bateria para entregar carga. Este es uno de los aspectos de mayor interes en los centros de investigacion alrededor el mundo. Por tal razon, en este trabajo se propuso

  17. The use of peracetic acid in drinking water systems: flow tests; L'acido peracetico in potabilizzazione: prove in flusso

    Energy Technology Data Exchange (ETDEWEB)

    Ragazzo, P. [Consorzio per l' Acquedotto del Basso Piave, San Dona' di Piave, VE (Italy); Navazio, G. [Padua Univ., Padua (Italy). Dipt. dei Processi Chimici dell' Ingegneria; Cavadone, A. [Solvay Chimica Italia S.p.A., Milan (Italy)

    2000-09-01

    In a previous research, a preliminary study was carried out on the disinfection efficiency of peracetic acid (PAA), comparing it to that of other disinfectants that are typically used, in batch tests with dosage values ranging from 0.5 to 5 ppm. The study was carried out on samples of water collected from several significant points of the treatment process at the main water treatment plant in Jesolo (Venice, Italy). On the basis of results (basically positive at that time) obtained from these tests, a 400 litre/hour pilot plant was built, as a lower scale reproduction of the drink water treatment system mentioned earlier, in order to study the characteristics of PAA even in tests that could more realistically simulate the flow of water along the process. These tests essentially confirmed the kinetics of the spontaneous hydrolysis to CH{sub 3} COOH+H{sub 2}O{sub 2} and those of dismutation to CH{sub 3}COOH+O{sub 2}, with half-life time values ranging from 3 to 12 hours, depending on the characteristics of the water (especially the pH factor) and the PAA concentration values. [Italian] In un precedente lavoro e' stato effettuato un preventivo studio sull'efficienza disinfettiva dell'acido peracetico, anche in confronto con gli altri piu' usuali disinfettanti, in prove condotte in batch, con dosaggi compresi tra 0.5 e 5 ppm, su campioni di acqua prelevati dai diversi punti significativi della linea di trattamento della centrale di Jesolo (Torre Caligo), gestita dal Consorzio Acquedottistico del Basso Piave di S. Dona' di Piave (Venezia). Sulla base dei risultati, sostanzialmente positivi, e' stato costruito un impianto pilota da 400l/h, riproducente, in scala, la linea di potabilizzazione su ricordata, per studiare le caratteristiche del PAA anche in prove piu' probanti condotte in flusso. In tali prove sono state sostanzialmente riconfermate le cinetiche delle reazioni spontanee di dirolisi a CH{sub 3}COOH+H{sub 2}O{sub 2} e di

  18. Proposal to neutralize acid fluids from wells in the Los Humeros, Pue., geothermal field; Propuesta para la neutralizacion de fluidos acidos provenientes de pozos del campo geotermico de Los Humeros, Pue.

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly del Carmen; Ramirez Montes, Miguel; Garcia Cuevas, Juan Manuel [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: magaly.flores@cfe.gob.mx

    2009-07-15

    Neutralizing an acidic fluid consists of adding a sodium hydroxide solution to neutralize the H group of acids, therefore increasing the pH. The injection of sodium hydroxide has to be continuous and at a proper depth inside the well to protect against the corrosion of casing and surface equipment. Neutralization is a common practice used in geothermal fields, such as at The Geysers in the US and Miravalles in Costa Rica-places where aggressive fluids cause problems for extracting and using geothermal fluids commercially. A zone surrounding wells H-4, H-16 and H-29 in the northern section of the Los Humeros, Pue., geothermal field, known as the Colapso Central, has shown evidence of aggressively acidic fluids. Several wells drilled in the area had to be repaired, thus plugging and isolating the deepest production zones. Well H-43 was drilled two years ago in the northern zone of the field, and even though it is not located in the aggressive-fluid zone, the well presents mineralogical features possibly indicating the presence of acidic fluids. Therefore, before producing this well it has been proposed we install a neutralization system with general characteristics presented in this paper. The system will prevent corrosion that up to now has prevented exploitation of the deep portion of Colapso Central, helping to develop the field in a more profitable way. [Spanish] Neutralizar un fluido acido consiste en agregarle una solucion de hidroxido de sodio. Esto neutraliza el grupo de acidos H y en consecuencia aumenta el pH. La inyeccion de hidroxido de sodio se realiza de manera continua y a una profundidad adecuada dentro del pozo para proteger a la tuberia y a todo el equipo superficial contra la corrosion. La neutralizacion es una practica comun que se viene realizando en campos como Los Geysers en Estados Unidos y en Miravalles, Costa Rica, donde la presencia de fluidos agresivos causa problemas en la extraccion y aprovechamiento del fluido geotermico con fines

  19. Propriedades físicas de lipídios estruturados obtidos de misturas de gordura do leite e óleo de milho

    Directory of Open Access Journals (Sweden)

    Rodrigues Juliana Neves

    2003-01-01

    Full Text Available Através da mistura e interesterificação de óleos e gorduras podem ser obtidos lipídios estruturados, que são compostos que apresentam características físicas, químicas e nutricionais diferentes das dos lipídios que lhes deram origem. Esses novos compostos podem apresentar capacidade de reduzir o risco de doenças, sendo então chamados de "alimentos funcionais". O objetivo deste estudo foi avaliar as propriedades físicas de lipídios estruturados obtidos por interesterificação química a partir de misturas de gordura do leite e óleo de milho. Foram preparadas quatro misturas, nas proporções de 80:20, 60:40, 40:60 e 20:80 de gordura do leite e óleo de milho, respectivamente. As amostras foram submetidas à interesterificação química com catalisador metóxido de sódio. As misturas e os lipídios estruturados obtidos foram avaliados quanto à consistência, conteúdo de gordura sólida e composição em ácidos graxos. Foram obtidos lipídios estruturados contendo teores de até 22% de ácido linoléico pela adição de até 40% de óleo de milho à gordura do leite, que originalmente possuía apenas cerca de 2% deste ácido graxo. A consistência e o conteúdo de gordura sólida foram dependentes da gordura do leite e da interação desta com o óleo de milho. Os coeficientes relativos às interações entre os componentes das misturas foram negativos, demonstrando efeito antagônico, característico de interações eutéticas entre gorduras. Os resultados mostraram relação linear significativa entre o conteúdo de gordura sólida e a consistência das amostras.

  20. Obtenção de biodiesel a partir de resíduos gordurosos obtidos de gordura animal - vísceras de frango

    OpenAIRE

    Mateus Afonso Gomes

    2010-01-01

    O foco principal do projeto foi estudar e avaliar os parâmetros da obtenção de Biodiesel tendo como matéria prima o resíduo gorduroso (OGR) obtido de gordura animal, particularmente a de frango. Os objetivos do projeto vão ao encontro de questões intimamente ligadas a área ambiental e socioeconômica que cercam a produção do biodiesel. Para isso, tornou-se necessário seguir as etapas do trabalho proposto e assim, determinar a viabilidade do projeto. Foi necessário obter os resíduos gordurosos ...

  1. Synthesis and characterization of PdAg as a catalyst for oxygen reduction reaction in acid medium; Sintesis y caracterizacion de PdAg como catalizador para la reaccion de reduccion de oxigeno en medio acido

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Casillas, D. C.; Vazquez-Huerta, G.; Solorza-Feria, O. [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: dcmartinez@cinvestav.mx

    2009-09-15

    This work presents the synthesis of the binary compound PdAg and the electrochemical characterization for oxygen reduction reaction (ORR) in acid medium. The catalyst is obtained from the reduction of Pd(NO{sub 3}){sub 2}·2H{sub 2}O and AgNO{sub 3} with NaBH{sub 4} in THF. The synthesized compound was physically characterized with transmission electron microscopy (TEM), sweep electron microscopy (SEM) and x-ray diffraction (XRD) of powder. Electrochemical studies were conducted to determine the catalytic activity and intrinsic properties of the PdAg material for the ORR in acid medium using cyclic voltamperometry (CV), rotary disc electrode (RDE) and electrochemical impedance spectroscopy (EIS) in a solution of H{sub 2}SO{sub 4} 0.5 M at 25 degrees Celsius. The electrochemical current-potential responses were compared to those of palladium and platinum. The kinetic results showed an increase in the performance of the bimetallic electrocatalyst containing Ag as compared to pure Pd, but less than that obtained with nanometric Pt. The Tafel slopes obtained are roughly120 mV dec-1, similar to that reported for Pt and Pd and for other Ru-based electrocatalysts. [Spanish] En este trabajo se presentan la sintesis del compuesto binario PdAg y su caracterizacion electroquimica para la reaccion de reduccion de oxigeno (RRO) en medio acido. El catalizador se obtuvo a partir de la reduccion de Pd(NO{sub 3}){sub 2}·2H{sub 2}O y AgNO{sub 3} con NaBH{sub 4} en THF. El compuesto sintetizado se caracterizo fisicamente por microscopia electronica de transmision (MET), microscopia electronica de barrido (MEB) y difraccion de rayos X (DRX) de polvos. Se realizaron estudios electroquimicos para determinar la actividad catalitica y las propiedades intrinsecas del material de PdAg para la reaccion de reduccion de oxigeno (RRO) en medio acido, utilizando las tecnicas de voltamperometria ciclica (VC), electrodo disco rotatorio (EDR) y espectroscopia de impedancia electroquimica (EIE), en

  2. Changes of arterial blood pressure, heart rate, internal body temperature, and blood acido-basic balance in the unanaesthetized rabbit following whole-body gamma irradiation at a mean absorbed dose of 250 rads

    Energy Technology Data Exchange (ETDEWEB)

    Dufour, R.; Court, L.

    1973-09-01

    The general effects of whole-body gamma -irradiation at a mean absorbed dose of 250 rads were studied simultaneously in the unanaesthetized rabbit for 48 hours. They occurred early, with the following characteristics: arterial blood pressure decreased steadily as early as the 2nd hour and reached its minimum value on the 5th hour with a decrease of about 14%; it remained low during the following two days. Heart rate increased during the first hour, was the highest by the end of the second hour, and resumed normal value on the 24th hour. Internal body temperature increased during the 1st hour and was maximum by the end of the 2nd hour, with a mean increase of 1.2 deg C; hyperthermia steadily decreased between the 4th and the 6th hours and had completely disappeared by the 24th hour. Respiratory alkalosis is shown in the acido-basic balance by a raise of pH, a decrease of PCO/sub 2/ and arterial blood bicarbonates. These various changes seem to indicate a double origin, both central and peripheral. (FR)

  3. Atividade antifúngica e cinética de morte microbiana de extratos obtidos de Streptomyces spp. isolados de solos paraibanos

    Directory of Open Access Journals (Sweden)

    Thompson Lopes de Oliveira

    Full Text Available Foram coletadas sessenta e oito amostras em diferentes solos paraibanos, com o isolamento de quarenta e nove cepas de Streptomyces spp. Após triagem antimicrobiana, por meio da técnica de difusão em meio sólido com blocos de agar, foram preparados os extratos dos microrganismos produtores de metabólitos bioativos, respectivamente cepas SP1 e SP3, e em seguida avaliados quanto a atividade antifúngica frente a espécies de fungos filamentosos de origem clínica e ATCC. O antagonismo foi determinado através dos ensaios de difusão com discos em meio sólido, microdiluição e cinética de morte microbiana. Os halos de inibição obtidos a partir dos extratos Sp-1 e Sp-3 apresentaram efeito antagônico com valores superiores aos halos de inibição promovidos pela droga controle, frequentemente utilizada na terapêutica antifúngica. Os resultados das concentrações inibitórias mínimas na microdiluição foram expressivos com valores fungicidas variando entre 10 mg e 0,078125 mg. Na cinética de morte microbiana, as atividades dos extratos Sp-1 e Sp-3 resultaram em dados estatisticamente significativos frente às cepas testes.

  4. LACTIC ACID BACTERIA WITH ANTIMICROBIAL ACTIVITY AGAINST PATHOGENIC AGENT CAUSING OF BOVINE MASTITIS BACTERIAS ACIDO LACTICAS CON ACTIVIDAD ANTIMICROBIANA CONTRA PATÓGENOS CAUSANTES DE MASTITIS BOVINA OUT BACTÉRIAS LÁTICAS COM ATIVIDADE ANTIMICROBIANA CONTRA OUT PATÓGENOS DA MASTITE BOVINA

    Directory of Open Access Journals (Sweden)

    LILIANA SERNA C

    2011-06-01

    Full Text Available The use of antibiotics to treat bovine mastitis, produces antibiotic residues in milk and decreased quality of dairy products. Lactic acid bacteria have been proposed as an alternative to avoid the use of antibiotics. This paper reports the antimicrobial activity against pathogens responsible of bovine mastitis, of 4 lactic acid strains isolated from cattle in a state of acidosis ruminal. It also evaluated the specific growth rate (m and antimicrobial activity of one of the strains, using two concentrations of carbon source (20 and 60 gl-1 in the commercial substrate MRS. The strains were biochemically identified as Lactobacillus acidophilus, Lactobacillus brevis, Lactobacillus fermen-tum and Weissella confusa. Weissella confusa showed the best antimicrobial activity against the major pathogens responsible of bovine mastitis. When has been used 60 gl-1 of total sugars in the fermentation substrate, was obtained diameter of inhibition of 31 mm for Staphylococcus aureus and 36 mm for Streptococcus agalactiae. The antimicrobial activity of Weissella confusa is superior antimicrobial activity reported by many other lactic acid bacteria, therefore Weissella confusa could potentially be used to prevent bovine mastitis.El uso de antibióticos para el tratamiento de mastitis bovina, genera residuos de antibióticos en la leche y disminuye la calidad de los subproductos lácteos. Las bacterias ácido lácticas se han propuesto como una alternativa para evitar el uso de antibióticos. En este artículo se reporta la actividad antimicrobiana contra patógenos productores de mastitis bovina, de 4 cepas acido lácticas aisladas de bovinos en estado de acidosis ruminal. Se evaluó además la velocidad especifica de crecimiento (m y la actividad antimicrobiana de una de las cepas, utilizando dos concentraciones de fuente de carbono (20 y 60 gl-1 en el sustrato comercial MRS. Las cepas se identificaron bioquímicamente como Lactobacillus acidophilus

  5. Propriedades funcionais de hidrolisados obtidos a partir de concentrados protéicos de soro de leite Functional properties of whey protein hydrolysates from milk whey proteins concentrate

    Directory of Open Access Journals (Sweden)

    Maria Teresa Bertoldo Pacheco

    2005-06-01

    Full Text Available O objetivo deste trabalho foi comparar a atividade funcional de hidrolisados obtidos por diferentes sistemas enzimáticos. Foram selecionadas proteáses de origem animal (pancreatina e bacteriana (protamex e alcalase. A atividade funcional foi monitorada pela dosagem de glutationa no fígado e testes de atividade imunológica no baço para reação imunológica primária (IgM através da contagem de células formadoras de placa (CFP. Nos ensaios biológicos foram utilizados camundongos isogênicos da linhagem A/J, em dieta AIN com 20% de proteínas na forma dos hidrolisados ou de concentrado de soro de leite. O número de CFP não diferiu estatisticamente para os hidrolisados de pancreatina e protamex, sendo inferior (PThe object of this work was to compare the functional activity of whey protein concentrate (WPC and its hydrolysates produced by different enzyme systems. Pancreatin and microbial (protamex and alcalase were utilized. Functional activity was monitored by liver concentration of glutathione and primary immunological response (IgM in spleen (PFC. In the biological assays isogênic mice A/J, fed on an AIN modified diet (20% WPC or its hydrolysates were used. ThePFC number did not differ for pancreatin and protemix hydrolysates but was inferior for alcalase hydrolysate (p<0.05. Liver glutathione concentration showed a high positive correlation (r=0,992 with the PFC number in the spleen.

  6. Atividade antiproliferativa dos extratos e da fração orgânica obtidos das folhas de Virola sebifera Aubl. (Myristicaceae

    Directory of Open Access Journals (Sweden)

    Carina Denny

    Full Text Available As cascas de Virola sebifera (Myristicaceae são utilizadas por populações indígenas amazônicas em preparações alucinógenas, nas quais foram encontrados alcalóides como a dimetiltriptamina e seus derivados. Considerando a enorme importância dos alcalóides isolados de plantas na terapêutica do câncer e a presença desses compostos em espécies de Virola, o presente trabalho teve por objetivo o estudo da atividade antiproliferativa em cultura de células tumorais humanas de extratos e da fração orgânica, obtidos das folhas de Virola sebifera. O extrato bruto diclorometânico (EBD foi considerado o mais ativo, com seletividade principalmente para a linhagem de pulmão (NCI-460 - IC50: 4,46 µg/mL e para a fração orgânica (FO obtida por extração ácido-base - IC50; 6,91 µg/mL. A atividade observada possivelmente pode ser atribuída a alcalóides ou compostos nitrogenados que foram evidenciados pelo corante Dragendorff. Assim, a purificação da FO será necessária a fim de comprovar a presença de compostos nitrogenados, através de isolamento e determinação estrutural, bem como a participação desses compostos na atividade antiproliferativa observada.

  7. Results of test of acid fluids neutralization in the well H-43, Los Humeros geothermal field, Puebla; Resultados de la prueba de neutralizacion de fluidos acidos en el pozo H-43, campo geotermico de Los Humeros, Puebla

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly del Carmen; Ramirez Montes, Miguel; Sandoval Medina, Fernando; Rosales Lopez, Cesar [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: magaly.flores@cfe.gob.mx

    2011-07-15

    The well H-43 was drilled in Los Humeros Geothermal Field, Pue., in 2007 and 2008. When well production was measured, it was found the well produced acid fluids with high corrosion potential. Then it was decided to try to neutralize the acidity of the H-43 fluids by adding a solution of sodium hydroxide. This is a basic substance used to neutralize mainly the acid groups H+, and the goal was to raise the pH of the fluids to minimize its corrosive features. First sodium hydroxide was injected into the well to protect the casing of 244.4 mm (9 5/8 in) against corrosion and then all the surface installations. It was possible to increase the pH of the well fluid from 5.2 up to 6.8 without altering the steam production, thus demonstrating the neutralization procedure is feasible. The approximate costs of the neutralization tests performed, including equipment for the proposed neutralization system, the neutralizer (NaOH), and drilling the well are about 71.4 million pesos (around 5.5 million USD). We estimate a benefit/cost ratio of 1.5 and a return on investment in five years, considering the income from energy sales at present value. [Spanish] El pozo H-43 fue perforado en el campo de Los Humeros, Pue., en 2007-2008, y al evaluar su produccion se encontro que producia fluidos acidos de alto potencial corrosivo. Se decidio por tanto realizar una prueba para neutralizar la acidez de los fluidos de este pozo, que consistio en agregarle una solucion de hidroxido de sodio. Esta es una sustancia basica que neutraliza principalmente los grupos acidos H+, con lo que se buscaba aumentar el pH del fluido lo necesario para reducir al maximo su caracter corrosivo. La inyeccion del hidroxido de sodio se realizo dentro del pozo a fin de proteger de la corrosion a la tuberia de revestimiento de 244.4 mm (9 5/8 pulgadas), y posteriormente a todos los equipos superficiales. Como resultado de la prueba, se logro aumentar el pH del fluido producido por el pozo de 5.2 a un maximo de 6

  8. Avaliação físico-química e microbiológica do soro de leite concentrado obtido por osmose inversa

    Directory of Open Access Journals (Sweden)

    Ana Cláudia Desconsi

    2014-04-01

    Full Text Available O processamento de leite para produção de queijo gera uma grande quantidade de soro. Este subproduto de laticínios pode ser considerado como matéria-prima na indústria de alimentos, especialmente em produtos agroindustrial para complementar e suplementar alimentos. Neste sentido, o objetivo deste trabalho foi avaliar a estabilidade e caracterizar físico-químico e microbiologicamente o soro de leite concentrado obtido por osmose inversa a partir de resíduos do processamento de mussarela. Foram analisadas amostras de soro de leite resultantes de diferentes estágios de processamento, tais como: soro de leite pasteurizado, soro de leite de silos de armazenagem, soro de leite concentrado e permeado. As determinações analíticas realizadas foram temperatura, acidez titulável (ºD, ºBRIX, densidade, extrato seco total, gordura total, pH, coliforme total, coliforme termotolerantes e micro-organismos aeróbios mesófilos empregando procedimentos do Standard Methods for the Examination of Dairy Products. Micro-organismos mesófilos foram observados em todas as amostras. Apesar deste indicativo, a contagem de bactérias aeróbias mesófilas presentes no soro tratado por osmose inversa apresentou uma contagem abaixo da referência (1x105 UFC mL-1 . O soro de leite concentrado apresentou temperatura de 8ºC, acidez titulável de 22 ºD, sólidos igual a 18 ºBRIX, densidade de 1085 g cm-3 , percentual de extrato seco total em torno de 30,0% e pH de 6,4. O soro concentrado apresentou teor de gordura percentual menor que 4%. Observou-se que o soro de leite concentrado é um produto com elevado valor nutricional e estabilidade microbiológica quando imediatamente submetido à osmose inversa. Por conseguinte, as concentrações de soro de leite avaliadas nesta investigação atendem aos requisitos técnicos e sanitários para consumo humano.

  9. Identificação e susceptibilidade antimicrobiana de microrganismos obtidos de otite externa aguda Identification and antimicrobial susceptibility of acute external otitis microorganisms

    Directory of Open Access Journals (Sweden)

    Janaina Cândida Rodrigues Nogueira

    2008-08-01

    Full Text Available Otite externa aguda é a infecção do conduto auditivo externo, geralmente causada por flora polimicrobiana. OBJETIVO: Isolar, identificar e determinar a susceptibilidade antimicrobiana dos organismos causadores da otite externa (OE. MÉTODO: 27 swabs foram obtidos de 27 orelhas de pacientes portadores de OE para cultura e 22 microrganismos foram isolados para avaliação de susceptibilidade. A susceptibilidade in vitro foi obtida através do método de ágar difusão em disco e os resultados, interpretados de acordo com critérios clínico-laboratoriais padrão. RESULTADOS: 10 culturas positivas para S. aureus, 8 culturas para P.aeruginosa, 5 para P.aeruginosa e S.aureus e 4 para fungos (Candida albicans e C. krusei. Gentamicina e as quinolonas foram ativas contra todas as cepas testadas, havendo resistência significativa contra amoxicilina/clavulanato. As espécies de Candida testadas foram sensíveis à Anfotericina B, nistatina, fluconazol e clotrimazol e resistentes à miconazol. CONCLUSÃO: A otite externa aguda é uma infecção polimicrobiana, e o conhecimento apropriado da etiologia e susceptibilidade dos microrganismos irá contribuir para o uso racional de antibióticos e o sucesso do tratamento.Acute external otitis is a polymicrobial infectious disease. AIM: The purpose of this study was to isolate, identify and determine the Antimicrobial susceptibility of organisms causing otitis externa (OE. METHODS: twenty-seven swabs were taken from the ears of 27 patients with OE for culture and 22 microorganisms were isolate to evaluate sensitivity. In vitro susceptibility tests were performed by agar diffusion disk and results were interpreted according to Clinical Laboratory Standards. RESULTS: 10 Ear cultures were positive for S. aureus , 8 for P. aeruginosa, 5 for P. aeruginosa and S. aureus and 4 for fungal organisms (Candida albicans e C. Krusei. Gentamicin and quinolones were active against all bacteria tested and significant

  10. Seleção de genótipos de mirtileiro obtidos a partir de polinização aberta

    Directory of Open Access Journals (Sweden)

    Doralice Lobato de Oliveira Fischer

    2014-03-01

    Full Text Available No Brasil, as cultivares de mirtileiro, exploradas economicamente, foram introduzidas de outros países e, sendo assim, selecionadas em outras condições edafoclimáticas, podendo apresentar limitações para seu cultivo. Visando à obtenção de plantas superiores mais adaptadas para as condições brasileiras, realizou-se a seleção em três populações de mirtileiro de polinização aberta com o objetivo de obter progênies superiores. O material vegetal utilizado constituiu-se de 3.554 plantas, provenientes de sementes das cultivares Bluegem (1.212 plantas, Bluebelle (1.439 plantas e Powderblue (903 plantas. O experimento foi conduzido em área previamente adubada, conforme análise de solo, em espaçamento de 30 x 30 cm, com sistema de irrigação por aspersäo. A seleção nas plantas das três populações foi realizada em três etapas (2007/2008, 2008/2009 e 2010/2011. No primeiro ciclo, realizou-se a seleção negativa, eliminando-se as plantas indesejáveis; no segundo, foi realizada a seleção positiva, quando foram selecionadas 20 plantas de cada uma das populações. Como critério de seleção, nos dois primeiros ciclos, foram usados os seguintes caracteres: vigor da planta, produção, estado fitossanitário, início de produção, presença de pruína na epiderme, tamanho e sabor do fruto. Ao final do segundo ciclo, as 20 plantas pré-selecionadas de cada população foram avaliadas, por um período de dois anos (2009/2010 e 2010/2011, registrando-se a produtividade das plantas e as variáveis químicas dos frutos. Com base nos resultados obtidos, pode-se concluir que 10 genótipos (BG5, BG2, BG3, BG6, PW3, PW5, PW1, BB10, BB5 e BB2 têm potencial para dar-se continuidade ao processo de seleção, pois apresentam bom desenvolvimento vegetativo, frutos de boa qualidade e de tamanho adequado ao mercado consumidor.

  11. Caracterização de filmes de PVDF-β obtidos por diferentes técnicas Characterization of β-PVDF films prepared at different conditions

    Directory of Open Access Journals (Sweden)

    Lígia M. M. Costa

    2009-01-01

    Full Text Available Filmes de poli(fluoreto de vinilideno, PVDF, na fase ferroelétrica β foram produzidos por diferentes técnicas: cristalização a partir da solução, estiramento mecânico e eletrofiação. Foi verificado por espectroscopia no infravermelho (FTIR e microscopia eletrônica de varredura (MEV que filmes obtidos a partir da cristalização por solução com dimetilformamida (DMF a 60 °C apresentam exclusivamente a fase β não orientada. Filmes produzidos pelo estiramento uniaxial de filmes originalmente na fase α resultam predominantemente na fase β orientada, porém com uma pequena porcentagem da α. Mantas produzidas por eletrofiação são constituídas por nanofibras exclusivamente na fase β e com o eixo das cadeias preferencialmente orientados ao longo das fibras, paralelamente à superfície da manta. Medidas calorimétricas (DSC verificaram que a porcentagem de cristalinidade e a temperatura de fusão foram pouco influenciadas pela técnica utilizada.Poly(vinylidene fluoride films, in the ferroelectric β phase, were prepared with different techniques: crystallization by solution, mechanical stretching and electrospinning. Using Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM, we observed that films obtained from crystallization in dimethylformamide (DMF solution at 60 ºC contain only non-oriented β phase. Films obtained by uniaxial stretching at 80 ºC and draw ratio 4, of samples originally in the α phase, result predominantly in the oriented β phase, though with still a small amount of the α phase. Membranes prepared by electrospinning method are constituted by nanofibers exclusively in the β phase and with the chain axis preferably aligned along the fibers, parallel to the membrane surface. The crystallinity percentage and the melting temperature, both inferred from calorimetric measurements (DSC, were little influenced by the techniques employed.

  12. Digestive and functional properties of a partially hydrolyzed cassava solid waste with high insoluble fiber concentration Propriedades funcionais-digestivas do concentrado de fibra alimentar obtido de mandioca

    Directory of Open Access Journals (Sweden)

    Dorivaldo da Silva Raupp

    2004-06-01

    Full Text Available Starch factories generate large amounts of cassava solid waste. A small amount is utilized for animal feed but most of it is discharged with deleterious effects to the envirounment. A edible food with a high content of insoluble dietary fiber (60.9%, named "partially hidrolyzed cassava waste" (PHCW, was prepared from industrial cassava solid waste by an enzymatic process. PHCW or wheat bran (WB were fed to model rats and both promoted digestive function effects, but PHCW produced the greatest effect. The insoluble fiber constituent from PHCW (and not the soluble fiber, promoted the greatest fecal bulking, fecal weight and defecation frequency in rats, as compared to WB. Such results indicate that the partially hydrolyzed cassava waste presents digestive function properties which allow it to be used as an adequate source of insoluble dietary fiber in the formulation of functional food for human nutrition.As fecularias e polvilheiras produzem grandes quantidades de bagaço de mandioca. A proposta dessa pesquisa consistiu determinar, em ratos modelo, a propriedade funcional-digestiva do produto alimentício bagaço de mandioca hidrolisado (BMH, um concentrado de fibra alimentar (60,9%, peso seco que foi obtido a partir do bagaço de mandioca da polvilheira e através de processo de hidrólise enzimática. O BMH produziu efeitos fisiológicos no trato digestivo dos ratos modelos mais acentuados que os efeitos produzidos pelo farelo de trigo (FT. Foram os componentes insolúveis da fibra alimentar do BMH, e não a fração solúvel, os que mais contribuíram para o maior volume e peso das fezes e, por conseguinte, para o maior número de defecações. Por isso, o BMH pode ser usado como fonte alternativa de fibra alimentar para a formulação de alimentos, principalmente os consumidos por indivíduos com a finalidade de regular ou manter normal a funcionalidade digestiva.

  13. Comparação entre nanocompósitos de polietileno/nanotubos de carbono e polietileno/nanolâminas de grafeno obtidos por polimerização in situ

    Directory of Open Access Journals (Sweden)

    Fabiana de Carvalho Fim

    2014-06-01

    Full Text Available Nanocompósitos de polietileno/nanotubos de carbono foram sintetizados através da polimerização in situ para serem comparados com nanocompósitos de polietileno/nanolâminas de grafeno, obtidos nas mesmas condições. Os nanocompósitos de polietileno/NTC foram obtidos com boas atividades catalíticas e foram caracterizados por DSC e MET. Os nanocompósitos com NG apresentaram melhor estabilidade térmica que os de NTC, porem não houve diferenças significativas nas propriedades dinâmico-mecânicas. No estudo da condutividade elétrica os nanocompósitos PE/NTC atingiram condutividades de materiais semicondutores com menor teor de nanocarga que os de PE/NG.

  14. Frequência de mola hidatiforme em tecidos obtidos por curetagem uterina Frequency of hydatidiform mole in tissue obtained by curettage

    Directory of Open Access Journals (Sweden)

    Andressa Biscaro

    2012-06-01

    Full Text Available OBJETIVO: Determinar a frequência de mola hidatiforme em tecidos obtidos por curetagem uterina. MÉTODOS: Estudo transversal, prospectivo e descritivo que incluiu pacientes submetidas à curetagem uterina por diagnóstico de aborto ou mola hidatiforme cujo material obtido foi encaminhado para exame anatomopatológico. Foram excluídas aquelas que não aceitaram participar da pesquisa, recusando-se a assinar o Termo de Consentimento Informado Livre e Esclarecido. Foram analisadas as seguintes variáveis: achados anatomopatológicos, idade, raça/cor, número de gestações e abortos prévios, idade gestacional no momento do diagnóstico, níveis séricos quantitativos da fração beta da gonadotrofina coriônica humana e achados ultrassonográficos. As variáveis foram empregadas para a verificação com o diagnóstico histológico, considerado o padrão-ouro. Os dados foram armazenados e analisados no software Microsoft Excel® e no programa Epi-Info, versão 6.0 (STATCALC e os resultados apresentados como frequência (porcentagem ou média±desvio padrão. Para a associação entre variáveis qualitativas foi usado o teste do χ², e admitiu-se significância estatística quando pPURPOSE: To determine the frequency of hydatiform mole in tissues obtained by curettage. METHODS: A cross-sectional, prospective and descriptive conducted on patients who underwent curretage due to a diagnosis of abortion or hydatiform mole whose material was sent for pathological examination. We excluded women who did not accept to participate and refused to sign the free informed consent form. We studied the following variables: pathological findings, age, race, number of pregnancies and previous abortions, gestational age at diagnosis, quantitative serum beta fraction of human chorionic gonadotropin and ultrasound findings. The data were compared to the to histological diagnosis, considered to be the gold standard. Data were stored and analyzed in Microsoft Excel

  15. Variação de caracteres em híbridos de abacaxizeiro obtidos de diferentes cruzamentos Characters variation in pineapple hybrids obtained by different crosses

    Directory of Open Access Journals (Sweden)

    José Renato Santos Cabral

    2009-12-01

    Full Text Available A herança dos caracteres utilizados na seleção de híbridos de abacaxi é de suma importância para o sucesso dos programas de melhoramento genético desta fruteira. o trabalho teve como objetivo analisar as variações observadas nos principais caracteres utilizados na seleção de híbridos de abacaxi obtidos de diferentes cruzamentos. Foi realizada a análise de variância dos caracteres: altura da planta do solo até à base do fruto, comprimento do pedúnculo, peso do fruto sem coroa, peso da coroa, teor de sólidos solúveis e acidez titulável de 446 genótipos avaliados e 213 selecionados. observou-se uma diminuição do peso do fruto nos híbridos selecionados na maioria dos cruzamentos e aumento dos sólidos solúveis em todos os cruzamentos, quando comparados com todos os genótipos avaliados. Constatou-se correlação linear simples positiva significativa entre o peso do fruto e a altura da planta. Foi observada também correlação linear simples significativa, de baixa magnitude, positiva entre o peso do fruto e o peso da coroa, a altura da planta e o peso da coroa, a altura da planta e o teor de sólidos solúveis e negativa entre o teor de sólidos solúveis e ocomprimento do pedúnculo. Verificou-se diferença entre os cruzamentos na seleção de genótipos de abacaxi para os caracteres estudados.The inheritance of traits used for the selection of pineapple hybrids is very important for the success of the genetic breeding program of this fruit crop. The objective of the present work was to analyze the variations observed in main traits used for the selection of pineapple hybrids obtained by different crosses. The analysis of variance for 446 evaluated and 213 selected genotypes was carried out for the following traits: plant height from soil to the base of the fruit, peduncle length, weight of the fruit without the crown, weight of the crown, total soluble solids content and titrable acidity. in general, it was observed that

  16. Nutritive value of the elephant-grass obtained on different cut ages Valor nutritivo do capim-elefante obtido em diferentes idades de corte

    Directory of Open Access Journals (Sweden)

    Joanis Tilemahos Zervoudakis

    2008-09-01

    Full Text Available The present work aimed to determine the chemical composition, the parameters of the dry matter (DM and neutral detergent fiber (NDF in situ degrability, the MS (IVDMD in vitro dry matter digestibility and the content of total digestible nutrients (NDT of grass-elephant obtained in different cut ages, in rainy season. The grass-elephant was submitted to the cut at the ages of 30, 45, 60, 75, 90 and 105 days, from December to March. The samples were analyzed for dry matter (MS, crude protein (PB, ash, ether extract (EE, total carbohydrates (CT, neutral detergent fiber (NDF and acid (FDA, indigestible NDF (INDF and insoluble protein in acid detergent (ADIP. Additionally, the samples were weighted in bags of nylon, incubated in the rumen of three bovine canulated, and the residues were analyzed for DM and NDF residual. Subsequently, it were submitted to in vitro incubation with liquid ruminal and solution of acid pepsin for dry matter in vitro digestibility (IVDMDdetermination, of which values were utilized for content of total digestible nutrients (NDT estimation. The content of CP was reduced in a linear way by the advancement of the cut age, while the contents of NDF, ADF, INDF and ADIP increased. The fraction “a” of the DM was reduced and the NDF I fraction was increased with the cut age advancement. The IVDMD and TDN presented quadratic behaviors (P<0,05, in function of cut age , with maximum values of 69.00% and 57.21%, to the ages of 19.64 and 48.98 days, respectively.Objetivou-se determinar a composição químico-bromatológica, os parâmetros da degradabilidade in situ da matéria seca (MS e fibra em detergente neutro (FDN, a digestibilidade in vitro da MS (DIVMS e o teor de nutrientes digestíveis totais (NDT do capim-elefante obtido em diferentes idades de corte, na época das águas. A forrageira foi submetida ao corte nas idades de 30, 45, 60, 75, 90 e 105 dias, de dezembro a março. As amostras foram analisadas para matéria seca

  17. REVIEW. BACTERIAS ACIDO LÁCTICAS: PAPEL FUNCIONAL EN LOS ALIMENTOS BACTÉRIAS ÁCIDO LÁCTICAS: PAPEL FUNCIONAL NOS ALIMENTOS REVIEW LACTIC ACID BACTERIA: FUNCTIONAL ROLE IN THE FOODS

    Directory of Open Access Journals (Sweden)

    RICARDO ADOLFO PARRA HUERTAS

    2010-06-01

    Full Text Available Las bacterias ácido lácticas han sido importantes en los alimentos por siglos por su considerable contribución al valor de los productos. Debido a varias de sus propiedades metabólicas, las bacterias ácido lácticas desempeñan un papel importante en la industria alimentaria, por su contribución significante al sabor, olor, textura, características sensoriales, propiedades terapéuticas y valor nutricional de los productos alimentarios. Este grupo está compuesto de un número de géneros incluyendo Lactococcus, Lactobacillus, Enterococcus, Streptococcus, Leuconostoc y Pediococcus. Algunos de los metabolitos producidos por las este tipo de bacterias son ácidos orgánicos, sustancias preservantes, polisacáridos, vitaminas, endulzantes, olores y sabores entre otros. Esta revisión se enfoca en estudiar la importancia de las bacterias acido lácticas en los alimentos.As bacterias ácido lácticas têm sido importantes nos alimentos por séculos pela sua considerável contribuição ao valor dos produtos. Devido a varias das suas propriedades metabóllcas, as bacterias ácido lácticas desempenham um papel importante na industria alimentar, pela sua contribulção significante ao sabor, cheiro, textura, características sensoriais, propriedades terapêuticas e valor nutrlcional dos produtos alimentar. Este grupo está constituido de um número de gêneros incluindo Lactococcus, Lactobaclllus, Enterococcus, Etreptococcus, Leuconostoc e Pediococcus. Alguns dos metabolltos produzidos por este tipo de bacterias são ácidos orgãnicos, sustãncias preservadoras, poli-sacáridos, vitaminas, adoçantes, cheiros e sabores entre outros. Esta revisão se enfoca em estudar a importãncia das bacterias ácido lácticas nos alimentos.Lactic acid bacteria have been important in food for centuries for their significant contribution to product value. Because several of its metabolic properties, lactic acid bacteria play an important role in the food

  18. Síntese, caracterização e aplicação de novos adsorventes obtidos a partir da modificação de sílicas mesoporosas

    OpenAIRE

    Natália Fattori

    2011-01-01

    Resumo: O presente trabalho descreve a preparação e caracterização de novos materiais adsorventes obtidos a partir da modificação química de dois diferentes substratos mesoporosos: uma sílica mesoporosa constituída de uma estrutura porosa altamente ordenada e uniforme, composta de poros ou canais cilíndricos dispostos paralelamente e empacotados em arranjo hexagonal (SBA-15), e uma sílica mesoporosa caracterizada por uma rede desordenada de poros, de tamanho e forma variados, distribuídos e i...

  19. Utilisation of chlorine-dioxide and peracetic acid as disinfectants of effluents from Bologna waste water treatment plant; Sperimentazione di tecniche di disinfezione mediante biossido di cloro e acido peracetico applicate alle acque reflue dell'impianto di trattamento della citta' di Bologna

    Energy Technology Data Exchange (ETDEWEB)

    Mancini, M.L. [Bologna Univ., Bologna (Italy). Dipt. di Ingegneria delle Strutture, dei Trasporti, delle Acque, del Rilevamento e del Territorio; Sorrentino, M.

    2000-01-01

    The necessity to optimize the disinfection phase in the treatment plant of waste water of Bologna made possible an experimental survey about the efficacy of two disinfectant agents utilized: chlorine-dioxide and peracetic acid. Object of the survey is to verify the possibility of utilize, full scale, also peracetic acid as disinfection agent. The experimentation regarded the reals flows adduced and discharged from the plant and it may be an useful reference to verify performance of post-treatment constructed wetlands. Particularly it has been possible to assay the efficacy of the different treatment in waste water with residual concentrations of suspended solids. [Italian] La necessita' di ottimizzare la fase di disinfezione nell'impianto di trattamento acque reflue della citta' di Bologna, sia per il miglioramento delle rese di inattivazione, sia per la riduzione dei costi di esercizio, ha reso necessaria un'indagine sperimentale sull'efficacia di due agenti disinfettanti utilizzati: il biossido di cloro e l'acido peracetico. Scopo dell'indagine e' quello di verificare la possibilita' di impiegare, a scala reale, per il refluo tipico dell'impianto di Bologna, anche l'acido peracetico quale agente di disinfezione. La sperimentazione, condotta ha interessato le portate reali addotte e scaricate dall'impianto e puo' costituire un riferimento utile verificare la fattibilita' igienico-sanitaria di post-trattamenti di lagunaggio o fertirrigazione. In particolare si e' potuta saggiare l'efficacia dei diversi sistemi di trattamento sui reflui aventi concentrazioni residue non trascurabili di solidi sospesi.

  20. Melhoramento do cafeeiro: XXII - Resultados obtidos no ensaio de seleções regionais de campinas Coffee breeding: XXII - Results from the regional coffee selection trial from campinas

    Directory of Open Access Journals (Sweden)

    A. Carvalho

    1961-01-01

    produtivas do que a média das testemunhas. Os contrastes das produções das progênies do 'Bourbon Vermelho' oriundas de Ribeirão Prêto, Campinas e Pindorama. mostraram que apenas as de Pindorama são menos produtivas do que as de Campinas. O contraste das produções das poucas progênies de Caturra examinadas indicou que o cultivar 'Caturra Amarelo' é mais produtivo do que o 'Caturra Vermelho', havendo pouca variação dentro de cada grupo. O 'Caturra Amarelo' tamb��m é mais produtivo do que as progênies do grupo de 'Bourbon Vermelho'. Todos os 84 itens selecionados produziram mais do que a média da testemunha geral, da variedade typica, e as duas progênies do 'Mundo Novo' de maior produção, MP 376-4 e CP 379-17 deram, respectivamente 191 e 172%, a mais do que a média da testemunha 'Típica.', índice do progresso da seleção. Além de mais produtivas, as progênies 'Mundo Novo' apresentaram maior vigor vegetativo, maior altura e diâmetro da copa, sementes maiores e mais pesadas. As progênies mais produtivas do 'Mundo Novo' deram elevada quantidade de sementes normais, do tipo chato. O confronto feito entre o grupo de progênies do 'Bourbon Amarelo' e 'Bourbon Vermelho' e entre as do 'Caturra Amarelo' e 'Caturra Vermelho', parece indicar que os cafeeiros de frutos amarelos além de mais produtivos, têm maior vigor, melhor rendimento, menor pêso de sementes, maior densidade, sintomas menos evidentes de deficiência de zinco e de queima das fôlhas devido à geada. Os dados também indicam que progressos na seleção podem ser obtidos pelo isolamento de progênies com melhor rendimento, quantidade mais elevada de sementes dos tipo chato e com sementes maiores, mais pesadas e de maior densidade. Os resultados deste ensaio estão servindo de base para indicar as melhores progênies de café destinadas à formação e renovação da cafeicultura nesta região do Estado de São Paulo.Coffee mother tree selection and progeny tests are being carried on at five

  1. Determinación del acido abscisico en papa (Solanum sp. como respuesta a bajas temperaturas Abscisic acid determination in potato (Solanum sp. as a response to low temperature

    Directory of Open Access Journals (Sweden)

    Ortiz Luz Yineth

    2001-12-01

    Full Text Available En Colombia, existen importantes áreas con amplio potencial
    agrícola, las cuales presentan restricciones ambientales para su utilización durante determinadas épocas del año, a causa de las heladas que provocan las bajas temperaturas. Éste es el caso del Altiplano Cundiboyasence, en el cual el fenómeno en mención afecta, drásticamente, los cultivos hasta ocasionar disminución del rendimiento o perdidas totales. El presente trabajo tuvo como finalidad detectar la presencia de Acido Abscísico (ABA en las siguientes variedades de papa de la especie Solanum sp.: 'Capiro', 'Única', 'Chitagá', 'Morita', 'Pastusa', 'ICA-Zipa' y 'Nativa' (silvestre. El análisis se hizo en el estadio de prefloración bajo condiciones de temperatura ambiente (-20°C y expuestas a una simulación de helada (-4°C. Para la extracción de ABA, se recolectaron hojas del tercio superior de la planta y se sometieron a extracción Líquido-Líquido y, para su cuantificación, se utilizó el bioensayo de la inhibición del coleóptilo de trigo (Triticun tensa vulgare L., el cual se realizó por cromatografía de capa fina. Entre las variedades estudiadas, se obtuvieron dos grupos de respuesta: susceptibles y tolerantes, las cuales están asociadas con la posible ausencia o presencia de ABA. En las variedades 'ICA-Zipa' y 'Chitagá' no se detectó la presencia de ABA, como tampoco, se observó tolerancia a las bajas temperaturas. En las variedades 'Capiro', 'Pastusa', 'Nativa', 'Única' y 'Morita', se observó mayor tolerancia a las bajas temperaturas.
    There are many important geographical areas in Colombia with a high agricultural potential. They have environmental
    constrains, however, to be used in certain periods during the
    year because of the low temperature. This happens in the
    Cundiboyasence plateau, in which, this phenomenon affects
    dramatically the growing of potato crops up to the point of
    causing a decrease in production or

  2. The Use of Tritium-Labelled Thymidine in Studies on the Synthesis of Deoxyribonucleic Acids; Emploi de la Thymidine Tritiee Dans L'etude de la Synthese de l'Acide Desoxyribonucleique; 0418 0441 043f 043e 0414 ; Empleo de Timidina Tritiada para Estudiar la Sintesis de los Acidos Desoxirtibonucleicos

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, P. A.; Crathorn, A. R.; Shooter, K. V. [Chester Beatty Research Institute, Institute of Cancer Research, London (United Kingdom)

    1962-02-15

    balayage continu. Les deux methodes de mesure ont donne des resultats sensiblement differents. Pour chaque cellule, l'activite due au tritium, calculee d'apres les autoradiographies, a toujours paru superieure a celle de l'ADN isole. En mesurant ensuite a l'aide du compteur a balayage continu l'activite de cellules entieres, apres lavage et homogeneisation, on a obtenu des chiffres qui concordaient avec les resultats de l'autoradiographie. Il semble donc, en l'occurrence, que l'autoradiographie ne permette pas de mesurer de maniere satisfaisante la synthese de l'ADN. On a etudie l'activite associee, autre que celle de l'ADN, et entrepris sur d'autres types de cellules des etudes analogues de l'activite totale due au tritium et de l'activite de l'ADN isole; des effets similaires ont ete observes. A partir de ces donnees, on a pu distinguer plusieurs phases dans le processus de synthese : 1 Degree-Sign incorporation initiale de la thymidine a la cellule; 2 Degree-Sign phosphorylation en deux etapes au moins; 3 Degree-Sign formation d'ADN par polymerisation de la thymidine phosphorylee. Ainsi, on simplifierait a l'exces en supposant que l'incorporation de thymidine a la cellule permette de mesurer la synthese de l'ADN; il semble cependant qu'en utilisant cet indicateur on puisse obtenir des indications utiles sur les etapes preliminaires du processus. (author) [Spanish] En el curso de estudios sobre la biosintesis del acido desoxirribonucleico se han realizado algunos experimentos, utilizando celulas asciticas de Ehrlich, para investigar la fijacion e incorporacion de timidina-{sup 3}H. Despues de incubar in vitro las celulas marcadas con este compuesto, se han tomado autorradiografias de las mismas; tambien se ha aislado el acido desoxirribonucleico y se ha medido la actividad del {sup 3}H utilizando un contador de flujo. Al comparar los dos metodos de medicion, se advierte una marcada discrepancia; la actividad del {sup 3}H por celula, calculada a base de las

  3. Avaliação do módulo de elasticidade de peças de madeira laminada colada (MLC) obtido por meio do ensaio de vibração transversal

    OpenAIRE

    Segundinho,Pedro Gutemberg de Alcântara; Carreira,Marcelo Rodrigo; Calil Neto,Carlito; Regazzi,Adair José; Dias,Antonio Alves; Calil Junior,Carlito

    2013-01-01

    O controle da qualidade é fundamental no processo de fabricação de peças de madeira laminada colada (MLC), e uma das formas desse controle pode ser por meio da avaliação não destrutiva do módulo de elasticidade. O objetivo deste trabalho foi comparar os valores de módulo de elasticidade das peças de MLC obtidos por meio do ensaio de vibração transversal livre e do ensaio de flexão estática, ambos feitos antes e após tratamento preservativo (contra a ação de agentes biológicos), realizado pelo...

  4. Composição química do óleo fixo obtido dos frutos secos da [Chamomilla recutita (L. Rauschert] produzida no município de Mandirituba, PR.

    Directory of Open Access Journals (Sweden)

    N.P. Pereira

    Full Text Available A camomila [Chamomilla recutita (L. Rauschert], é uma planta empregada na indústria de medicamentos, cosméticos e alimentos. Os frutos secos da camomila conhecidos por "sementes" são provenientes dos capítulos florais, dos quais pode-se extrair um óleo fixo rico em ácidos graxos insaturados. Através da técnica de extração com hexano em dispositivo de soxhlet, foi obtido o óleo bruto dos frutos secos da camomila em 19% de rendimento. O óleo foi caracterizado pela técnica de CG-EM, revelando um elevado teor de ácido linoleico na sua composição. Portanto, o óleo oriundo dos frutos secos da camomila vem a ser uma matéria-prima potencialmente útil na dermo-farmácia.

  5. Avaliação do módulo de elasticidade de peças de madeira laminada colada (MLC obtido por meio do ensaio de vibração transversal

    Directory of Open Access Journals (Sweden)

    Pedro Gutemberg de Alcântara Segundinho

    Full Text Available O controle da qualidade é fundamental no processo de fabricação de peças de madeira laminada colada (MLC, e uma das formas desse controle pode ser por meio da avaliação não destrutiva do módulo de elasticidade. O objetivo deste trabalho foi comparar os valores de módulo de elasticidade das peças de MLC obtidos por meio do ensaio de vibração transversal livre e do ensaio de flexão estática, ambos feitos antes e após tratamento preservativo (contra a ação de agentes biológicos, realizado pelo processo de Célula Cheia. No total, foram produzidas 54 peças de MLC de dimensões nominais de 9 cm x 9 cm x 200 cm, com três espécies de madeira de reflorestamento coladas com dois adesivos de aplicação estrutural e tratadas com três preservantes. Foi obtida uma correlação significativa entre os valores do módulo de elasticidade obtidos pelos dois métodos (r variou entre 0,85 e 0,99. Concluiu-se que o ensaio de vibração transversal livre pode ser utilizado para avaliação do módulo de elasticidade de peças de MLC, sendo uma alternativa ao ensaio de flexão estática

  6. Stability of RNA and DNA in Bone Marrow Cells, Demonstrated with Tritiated Cytidine and Thymidine; Emploi de la Cytidine et de la Thymidine Tritiees pour Demontrer la Stabilite de l'ARN et l'ADN dans les Cellules de la Moelle Osseuse; 0421 0442 0430 0414 ; Estudio de la Estabilidad de los Acidos Ribonucleico y Desoxirribonucleico de las Celulas de la Medula Osea, Utilizando Citidina y Timidina Tritiadas

    Energy Technology Data Exchange (ETDEWEB)

    Bond, V. P.; Feinendegen, L. E.; Cronkite, E. P. [Medical Research Centre, Brookhaven National Laboratory, Upton, Long Island, NY (United States)

    1962-02-15

    maniere que l'ADN. L'ARN et l'ADN de formation recente ne se diluent dans les cellules qu'a la faveur de la division cellulaire. (author) [Spanish] Los autores han estudiado el metabolismo de los acidos desoxirribonucleico y ribonucleico utilizando timidina tritiada (timidina-{sup 3}H), un precursor especifico del acido desoxirribonucleico, y citidina tritiada (citidina-{sup 3}H), un precursor comun de los acidos ribonucleico y desoxirribonucleico. Empleando citidina-{sup 3}H se determino autorradiograficamente la incorporacion diferencial por celula en los acidos ribonucleico y desoxirribonucleico, asi como en el espacio soluble. La misma determinacion se efectuo empleando metodos autorradiograficos y quimicos en el caso de poblaciones celulares, mediante extraccion diferencial aplicando un tratamiento apropiado con acido perclorico. Los estudios preliminares sobre renovacion realizados en celulas de HeLa con citidina-{sup 3}H pusieron de manifiesto la funcion precursora del acido ribonucleico nuclear respecto del acido ribonucleico citoplasmatico. La conservacion y distribucion del indicador en la fraccion acido ribonucleico es compatible con una mayor estabilidad de las macromoleculas de dicho acido. Asimismo, la incorporacion continua del indicador en la fraccion acido desoxirribonucleico es compatible con la presencia de un precursor de dicho acido en las ultimas fases de la sintesis. Fenomenos analogos se observaron en las celulas no maduras de la medula osea de la tata, estudiadas durante los dias consecutivos a la administracion de citidina-{sup 3}H por via intravenosa. La actividad del tritio en la fraccion soluble en acido y en las fracciones ARN y ADN se evaluo por metodos quimicos y autorradiograficos. Se comprobo que las tres curvas son paralelas desde el dia que sigue al de inyeccion y paralelas asimismo a las curvas de actividad del tritio en el acido desoxirribonucleico, cuando este se marca con timidina- {sup 3}H. La velocidad de disminucion de la

  7. Rigidez do papelão ondulado: comparação entre resultados experimentais e os obtidos por cálculo analítico Bending stiffness evaluation of cardboard: comparison between experimental and analytically results

    Directory of Open Access Journals (Sweden)

    Paulo G. Magalhães

    2006-04-01

    Full Text Available Embalagens de papelão ondulado para produtos hortícolas têm como função principal a proteção do produto. O dimensionamento de uma embalagem de papelão requer o conhecimento da rigidez à flexão, que depende dos módulos de elasticidade dos elementos que o constituem. Este trabalho teve por objetivo calcular, a partir da caracterização física do papelão em laboratório, o módulo de elasticidade por diferentes métodos, comparando os resultados com os valores obtidos experimentalmente. Dez corpos de prova de cada um dos papéis selecionados para este estudo foram testados na direção de fabricação e na direção transversal. A resistência à tração dos papéis, capa e miolo, utilizada para calcular a rigidez, foi determinada em máquina universal de ensaios. Para a obtenção da rigidez à flexão, foi realizado o teste de quatro pontos. Foi observada expressiva variação entre os métodos pelos quais se obtêm os módulos de elasticidade que reflete nos valores de rigidez da estrutura. Os valores de rigidez obtidos experimentalmente foram sempre superiores aos valores obtidos por cálculos analíticos. Essa diferença pode ser atribuída a dois fatores conjugados: o processo de fabricação que confere maior rigidez do que os componentes isoladamente, e o outro componente é a adição de camada adesiva que não é levada em consideração nos cálculos analíticos.Cardboard packing for horticultural products has as main function to protect them. The design of a cardboard packing request the knowledge of the bending stiffens which is depending on the modulus of elasticity. The objective of this work was to calculate the cardboard modulus of elasticity from data obtained in laboratory using physical characterization test, with different methods, and comparing the results with the values obtained experimentally. Ten samples of each cardboard selected for this study were tested in the paper fabrication direction and in its

  8. Geração de Isolinhas, com dados obtidos por levantamento GPS/L1L2, mediante a técnica de Redes Neurais Artificiais - DOI: 10.4025/actascitechnol.v28i2.1195

    Directory of Open Access Journals (Sweden)

    Elaine Cristine Barros de Souza

    2006-03-01

    Full Text Available O objetivo deste trabalho é mostrar uma alternativa para o processo de interpolação empregado em Modelagem Digital do Terreno. Utilizando-se dados de levantamentos GPS coletados por meio de posicionamento relativo cinemático realizou-se um processo de interpolação por meio de Redes Neurais Artificiais (RNA. Os resultados foram comparados com os dados obtidos usando-se o algoritmo de interpolação Inverso do Quadrado de uma Distância (IQD para avaliar o comportamento das grades geradas por meio de análises qualitativas (isolinhas e MDT e quantitativas (resíduos. Conclui-se que o método testado é viável se comparado com o algoritmo IQD e, portanto, o uso de RNA apresenta-se adequado para a interpolação de dados GPS provenientes do processamento de fase das portadoras L1 e L2

  9. Estudo da estabilidade de melões desidratados obtidos por desidratação osmótica seguida de secagem convencional Stability evaluation in dehydrated melons obtained by a combination of osmotic dehydration and conventional drying

    Directory of Open Access Journals (Sweden)

    Andréa da Silva Lima

    2004-04-01

    Full Text Available O presente trabalho teve por objetivo avaliar a estabilidade de melões desidratados obtidos por desidratação osmótica à pressão atmosférica (760 mmHg e a vácuo parcial (660 mmHg seguida de secagem convencional. A estabilidade dos produtos foi avaliada segundo suas características físico-químicas, microbiológicas e sensoriais, durante 180 dias de armazenamento, à temperatura ambiente. Ambos os processos resultaram em boa estabilidade físico-química e microbiológica dos produtos que mostraram boa aceitação durante todo o período de armazenamento.The objective of the present work was to evaluate storage stability of melons processed by a previous osmotic dehydration at atmospheric pressure (760 mmHg or partial vacuum (660 mmHg followed by conventional drying. The stability was assessed monthly by means of physico-chemical, microbiological and sensorial methods, during 180 days of storage at room temperature. Both the processes resulted in good physico-chemical and microbiological stability of the products, which presented good acceptability during all the storage time.

  10. SOME FACTORS RELATED WITH MICROBIOLOGICAL QUALITY OF RAW MILK OBTAINED IN FARMS AROUND GOIÂNIA (GO ESTUDO DE ALGUNS FATORES RELACIONADOS COM A QUALIDADE MICROBIOLÓGICA DO LEITE CRU OBTIDO NA FONTE DE PRODUÇÃO

    Directory of Open Access Journals (Sweden)

    José Carlos Seraphin

    2007-09-01

    Full Text Available

    The aim of this work is the evaluation of some factors that contribute to the microbiological and hygienic quality of raw milk, obtained at production level, placing emphasis to verify some important variables performance in raw production, like: spoil or free tail, pen floor types, strainers type utilized, etc, in relation to a group of present microorganisms; the counting of viable mesophilic aerobes, thermodurics and the most probable number of total coliform and the lactofiltration test.

    O presente trabalho objetivou estudar alguns fatores relacionados com a qualidade microbiológica e higiênica do leite cru obtido na fonte da produção, tendo a preocupação de verificar o desempenho de algumas variáveis importantes na produção do leite “in natura” tais como: cauda solta ou presa, tipo de piso dos currais, tipo de coador empregado etc., em relação a grupos microbianos presentes como a contagem de microorganismos termodúricos, número mais provável de coliformes totais e da prova da lactofiltração.

  11. Concentração inibitória mínima de oxitetraciclina para isolados de Aeromonas Hydrophila obtidos de diferentes fontes Minimal inhibitory concentration to oxitetracycline in Aeromonas Hydrophila strains isolated from different sources

    Directory of Open Access Journals (Sweden)

    Delton José Pereira Júnior

    2006-12-01

    Full Text Available Objetivou-se com este trabalho determinar a concentração inibitória mínima (MIC de oxitetraciclina para isolados de Aeromonas hydrophila obtidos de pescado, água de cultivo de peixes e casos de septicemia hemorrágica em peixes. Foi determinado MIC de 100 isolados de A. hydrophila, oriundos de 12 pisciculturas localizadas nos Estados de Minas Gerais, Rio de Janeiro e Rio Grande do Sul, utilizando a técnica de macrodiluição em caldo. Os resultados demonstraram que 14 isolados apresentaram MIC>100 µg/mL (resistentes e 86 apresentaram MICThe aim of this paper was to determine the minimal inhibitory concentration (MIC to oxitetracycline in Aeromonas hydrophila strains isolated from marketed fish, pond water of piscicultures and fish suffering hemorrhagic septicemia. These strains were obtained from 12 different piscicultures from Minas Gerais, Rio de Janeiro e Rio Grande do Sul states. It was determined the MIC to 100 strains, using the broth macrodilution method, and the results showed that 86 strains shown value of MIC100µg/mL (classified as resistant. No differences were observed among strains isolated from marketed fish, pond water and disease outbreaks. I was concluded that the variation detected may represent a risk of selection of resistant bacterial strains in aquatic environments under use of oxitetracycline.

  12. Evolução estrutural do filme cerâmico de forsterita obtido sobre o aço silício de grão orientado

    Directory of Open Access Journals (Sweden)

    Vasconcelos D. C. L.

    2000-01-01

    Full Text Available Neste trabalho é descrita a formação, sobre o aço silício de grão orientado, de um filme cerâmico obtido a partir de MgO contendo os aditivos TiO2 e SrSO4. O material foi tratado termicamente a 900 0C, 1000 0C e 1200 0C e por 15 horas a 1200 0C. O recobrimento foi analisado por microscopia eletrônica de varredura (MEV, microssonda eletrônica (EDS, difração de raios X e espectroscopia de centelhamento (GDS. A evolução morfológica observada se passa com a formação de uma camada contínua de óxidos na superfície mais externa do material. Com a elevação da temperatura a camada mais externa torna-se mais espessa e aumenta o teor de Mg nas partículas presentes na sub-camada. É possível verificar a presença de forsterita cristalina na superfície das amostras tratadas a temperaturas superiores a 1000 0C. A profundidade de penetração do Mg no material aumenta com a elevação da temperatura, passando de cerca de 75 nm a 900 0C para aproximadamente 1,9 mim a 1200 0C.

  13. Análise mecanística de um pavimento flexível restaurado a partir do MR obtido em diferentes softwares de retroanálise com dados de viga Benkelman

    Directory of Open Access Journals (Sweden)

    Daniel Koscrevic Pandolfo

    2016-12-01

    Full Text Available Atualmente é possível dimensionar uma estrutura rodoviária ou um reforço de pavimento através de métodos mecanísticos, podendo se utilizar os métodos empíricos como o do CBR (Califórnia Bearing Ratio para um pré-dimensionamento. Neste enfoque a estrutura é tratada como qualquer outra em engenharia, como por exemplo, a de concreto armado, onde as tensões e deformações são analisadas e limitadas variando-se dimensões e características dos materiais.  Para tratar do reforço de pavimentos, é necessário o prévio conhecimento de algumas características dos materiais existentes na estrutura, como sua rigidez através do módulo de resiliência, o qual pode ser obtido mediante processo de retroanálise das bacias de deflexão. Neste trabalho foi desenvolvido um estudo que buscou retroanalisar dez bacias de deflexão medidas com Viga Benkelman junto à Rodovia BR 472/RS a partir de dois diferentes softwares de retroanálise, e utilizar estes valores em uma análise mecanística propondo diferentes espessuras de reforço em CA (concreto asfáltico. Para cada conjunto de valores de módulo de resiliência obtido foram propostas 6 diferentes espessuras de reforço com MR de 6645 MPa, sendo elas: 4, 7, 10, 13, 16 e 19 cm. Estas estruturas foram analisadas com o software de cálculo de tensões, deformações e deslocamentos AEMC (Análise Elástica de Múltiplas Camadas, a fim de obter a deformação específica de tração na fibra inferior do revestimento e de compressão no topo do subleito. Os valores de deformação foram utilizados nos modelos de desempenho à fadiga de Pinto (1991, Franco (2007 e Federal Highway Administration dos EUA (FHWA, e nos modelos de desempenho de afundamento da trilha de roda do Asphalt Institute dos EUA e Laboratoire Central des Ponts et Chaussées da França (LCPC, afim de estimar o número de solicitações que a estrutura será capaz de suportar sem que ocorra trincamento por fadiga ou deforma

  14. Parâmetros biofísicos obtidos por sensoriamento remoto em região semiárida do estado do Rio Grande do Norte, Brasil

    Directory of Open Access Journals (Sweden)

    Joel M. Bezerra

    2014-01-01

    Full Text Available Apesar de ser o único bioma brasileiro cujos limites estão restritos ao território nacional, pouca atenção tem sido dada à conservação da diversificada paisagem da Caatinga. Em virtude da carência de dados de campo para monitorar os parâmetros biofísicos da Caatinga em região semiárida do Nordeste brasileiro, este trabalho teve como objetivo avaliar a dinâmica espaço-temporal por meio de técnicas e produtos de Sensoriamento Remoto. A área de estudo compreendeu a Unidade de Conservação do Parque Nacional da Furna Feia e suas adjacências, situada entre os municípios de Mossoró e Baraúna (RN, Brasil. Utilizaram-se seis imagens orbitais do TM LANDSAT 5, órbita 216 e ponto 63, no período de 2007 a 2010. Com auxílio da ferramenta Sistema de Informação Geográfica se implementaram os algoritmos com geração das cartas temáticas expressando a variabilidade dos parâmetros de albedo da superfície, NDVI e temperatura de superfície. Os resultados obtidos não só foram consistentes com dados da literatura para os diferentes usos do solo e variações climáticas. Além de demonstrar o potencial das geotecnologias, a compreensão da dinâmica dos padrões espaciais e temporais dos processos biofísicos de interação solo-planta-atmosfera da Caatinga no Semiárido.

  15. Thermal behavior of diesel/biodiesel blends of biodiesel obtained from buriti oil=Comportamento térmico de blendas de diesel/biodiesel de biodiesel obtido a partir do óleo de buriti

    Directory of Open Access Journals (Sweden)

    Alexandre Gustavo Soares do Prado

    2012-04-01

    Full Text Available Biodiesel has been obtained from methanolysis of buriti oil. This biodiesel was added in fossil diesel in order to obtain diesel/biodiesel blends. Thermal analysis of blends were carried on 30-600oC range at rate of 10oC min.-1. Kinetic parameters such as activation energy (Ea, pre-exponential factor (A, Gibbs energy (≠G, enthalpy (≠H and entropy (≠S of activation were determined by using Coats–Redfern equation. The Ea, ≠H and ≠G values presented a linear increase with biodiesel amount added in blends. The heat of combustion of diesel/biodiesel blends was determined, and it was observed that the heat of combustion decreased with the addition of biodiesel in diesel/biodiesel blends.O biodiesel foi obtido a partir de metanólise de óleo de buriti. O biodiesel foi adicionado ao diesel fóssil a fim de obter misturas de biodiesel/diesel. Análises térmica das misturas foram realizadas entre 30-600°C com uma taxa de aquecimento de 10ºC min.-1. Parâmetros cinéticos como a energia de ativação (Ea, fator pré-exponencial (A, energia livre de Gibbs (≠G, entalpia (≠H e entropia de ativação (≠S foram determinadas usando equação de Coats-Redfern. Os valores de Ea, ≠H and ≠G apresentaram aumento linear com a quantidade de biodiesel adicionado na mistura. O calor de combustão de misturas de biodiesel/diesel foi determinada, e foi observado que o calor de combustão diminuiu com a adição de biodiesel no diesel e nas misturas de biodiesel.

  16. Desempenho produtivo e massa média de frutos de morangueiro obtidos de diferentes sistemas de cultivo / Performance and average mass of strawberry fruit obtained from different cropping systems

    Directory of Open Access Journals (Sweden)

    Letícia Kurchaidt Pinheiro Camargo

    2010-11-01

    Full Text Available ResumoO trabalho teve como objetivo avaliar a produtividade e a massa média de frutos de oito cultivares de morangueiro (Aromas, Camino Real, Campinas, Dover, Oso Grande, Toyonoka, Tudla-Milsei e Ventana, cultivadas em diferentes sistemas de produção. O delineamento estatístico utilizado foram blocos casualizados com quatro repetições. Os frutos foram colhidos no período de outubro de 2007 a fevereiro de 2008. Os resultados obtidos permitem inferir que, quanto à produtividade, o sistema orgânico foi mais efetivo para as cultivares Oso Grande e Tudla-Milsei e o sistema convencional para Dover e Toyonoka. As maiores massas médias foram encontradas nos frutos das cultivares Tudla-Milsei e Ventana, em ambos os sistemas de cultivo. A cultivar que se destacou tanto no sistema orgânico quanto no sistema convencional, foi a Tudla-Milsei, com as maiores produtividades e os frutos com maior massa média. As cultivares responderam diferentemente em função do manejo cultural empregado em cada sistema de cultivo, o que permite afirmar que há variabilidade entre as cultivares comerciais mais plantadas na atualidade. Portanto, a escolha da cultivar a ser utilizada, visando à produtividade, deverá ocorrer em função do seu desempenho dentro de cada sistema de cultivo. AbstractThe goal of this work was to evaluate the productivity and mass of fruit average of eight cultivars (Aromas, Camino Real, Campinas, Dover, Oso Grande, Toyonoka, Tudla-Milsei and Ventana of strawberry (Fragaria x ananassa grown in different cropping systems. The experimental designed was randomized blocks with 4 replications. The fruits were collected in the period from October 2007 to February 2008. The results allow inferring that the productivity, the organic system was more effective for the Oso Grande e Tudla-Milsei and conventional system for Dover and Toyonoka. The highest masses averages were found in fruits of Tudla-Milsei and Ventana, in both systems. Tudla

  17. Caracterização de concentrado protéico de folhas de mandioca obtido por precipitação com calor e ácido Characterization of cassava leaf protein concentrate obtained by heat and acid precipitation

    Directory of Open Access Journals (Sweden)

    Cláudia de Fátima Modesti

    2007-09-01

    Full Text Available As folhas de mandioca apresentam um teor elevado de proteínas, todavia sua digestibilidade é baixa. A produção de concentrado protéico de folhas de mandioca (CPFM permite a utilização das proteínas das folhas com um reduzido teor de fibras e melhor qualidade protéica. Neste trabalho, analisaram-se características químicas de CPFM obtidos por diferentes formas de precipitação, com calor e com ácido. Os CPFM praticamente não apresentaram diferenças na composição centesimal. O nível de proteína dos CPFM aumentou 57,72% em comparação ao da farinha de folhas de mandioca (FFM. Os rendimentos de extração das proteínas também foram semelhantes para os CPFM. O teor de Fe dos CPFM foi mais elevado quando comparado com o da FFM. A FFM apresentou absorção de água e de óleo mais elevada que os CPFM, mas, entre os tipos de CPFM, os resultados foram semelhantes. A mínima solubilidade de nitrogênio da FFM e dos CPFM foi observada em pH entre 3 e 5. Verificou-se que a FFM apresentou uma capacidade de formação e estabilidade de espuma mais elevada que os CPFM. Tanto a FFM quanto os CPFM não apresentaram boa estabilidade de emulsão.Cassava leaves have a high content of protein of low digestibility. The production of cassava leaf protein concentrate (CLPC enables cassava leaf protein to be used with a reduced fiber content and better protein quality. This work involved an investigation of the chemical characteristics of CLPC produced by different forms of precipitation, using heat and acid. No significant differences were found in the centesimal composition of the CLPC. The protein content in CLPC was 57.72% higher than in cassava leaf flour (CLF. Both types of CLPC precipitation also yielded similar protein concentrations. The CLPC Fe content was higher than that of the CLF. The CLF presented higher water and oil absorption than did CLPC, although the CLPC extracted by the two methods showed similar results. The lowest nitrogen

  18. Produção de xarope de açúcar invertido obtido por hidrólise heterogênea, através de planejamento experimental Improvement of invert syrup production using heterogeneous hidrolysis

    Directory of Open Access Journals (Sweden)

    Marili Villa Nova RODRIGUES

    2000-04-01

    Full Text Available A utilização de açúcar líquido na indústria alimentícia constitui em vantagem nas aplicações onde o açúcar é adicionado em solução. O xarope de açúcar invertido reúne a elevada solubilidade da frutose à difícil cristalização da glicose, aumentando seu poder edulcorante e diminuindo os riscos de cristalização. Essas propriedades contribuem para aumentar o valor desses xaropes para uso em vários produtos alimentícios, sobretudo na indústria de refrigerantes. O produto de maior interesse comercial é aquele com nível de inversão próximo a 55%, pois nessa faixa a solubilidade é máxima possibilitando trabalhar com concentrações em torno de 76,5% de sólidos solúveis, diminuindo assim a susceptibilidade à contaminação microbiana, sem riscos de cristalização. O objetivo deste trabalho foi desenvolver as etapas de produção do xarope de açúcar invertido produzido a partir de resinas de troca-iônica, visando obter um produto final de alta qualidade que atenda às necessidades da indústria de refrigerantes, utilizando como ferramenta o planejamento experimental. O processo de obtenção do xarope invertido foi iniciado com a descoloração do xarope de sacarose através de duas colunas contendo resina aniônica, para então ser invertido pela eluição numa coluna de resina catiônica. O produto obtido foi isento de qualquer objeção ao paladar, inodoro, praticamente livre de cor (56 ICUMSA e hidroximetil furfural (11ppm. A contagem microbiológica para fungos, leveduras e bactérias foi menor que 1 unidade/mL.The use of liquid sugar in the food industry constitutes a great advantage in applications where the sugar is added in solution. The invert syrup gathers the high solubility of the frutose to the difficult crystallization of the glucose, increasing its sweetness and decreasing the crystallization risks. Those properties contribute to increase the value of those syrups for use in several products, above

  19. Comparação entre valores espirométricos de referência obtidos a partir das equações de Knudson e de Pereira Adultos

    Directory of Open Access Journals (Sweden)

    LADOSKY WALDEMAR

    2001-01-01

    Full Text Available Em revisão de 1991, a American Thoracic Society (ATS recomenda que cada região defina equações próprias para obtenção dos valores teóricos (VTs dos parâmetros espirométricos, que traduzam a realidade funcional para a população local. Quando dessa recomendação, os EUA já dispunham de diversos sistemas de equações próprios, bem como a Comunidade Européia e a Polônia em particular. Em 1992, Pereira et al., analisando 4.200 espirogramas de brasileiros normais, encontraram VT para capacidade vital forçada (CVF, volume expiratório forçado de 1 seg. (VEF1 e de fluxo expiratório médio (FEF25-75 diferentes dos descritos pelos autores americanos e europeus. Este estudo foi realizado para comparar as equações de Pereira et al., desenvolvida a partir de amostra de população brasileira, e as americanas de Knudson et al., bastante utilizadas em nosso meio. Foi também investigada a conseqüente influência nos laudos espirométricos, quando uma ou outra é empregada. Foram analisados 1.070 espirogramas de pacientes de ambos os sexos (389 homens e 681 mulheres que vieram ao serviço para avaliação funcional de rotina. Não foi excluída qualquer patologia nem levada em conta a situação tabágica do paciente. Para cada paciente foi feito o cálculo do VT para CVF, VEF1 e FEF25-75 segundo as equações de Pereira (VT-P e de Knudson 1983 (VT-K e comparados as médias, desvios padrões e os laudos obtidos por um e por outro. Os VT-K para a CVF foram de 4,01% [p < 0,005] maiores entre as mulheres, levando a sobrevalorização das restrições respiratórias, mas entre os homens não houve diferença relevante. Quanto à VEF1, os VT-P foram superiores tanto em homens (4,76% [p < 0,005] como em mulheres (5,04% [p < 0,05], levando a maior sensibilidade na identificação de obstruções respiratórias. Não se observou diferença relevante entre os VT-P e VT-K para o FEF25-75 em nenhum dos sexos.

  20. Proteínas totais do liquido cefalorraqueano obtido por punção da cisterna magna: valores normais. Variações ligadas ao sexo Total protein content of normal cisternal cerebrospinal fluid: Variations related to sex

    Directory of Open Access Journals (Sweden)

    L. M. Singer Vermes

    1976-12-01

    Full Text Available Aplicando o método de Lowry, determinamos as proteínas totais do LCR considerado normal de 98 pessoas: 58 do sexo masculino e 40 do feminino. Todas as amostras de LCR foram obtidas por punção da cisterna magna (LCR-SO. Mediante tratamento estatístico dos valores obtidos, estabelecemos as taxas normais de proteinorraquia cisternal para a população mista: limite superior de 40,36 mg/100 ml, valor médio de 26,78 mg/100 e limite inferior de 13,20 mg/100 ml. Estes valores são superiores àqueles referidos na literatura. Foi verificado que a proteinorraquia total é, em média, significantemente maior nos indivíduos do sexo masculino, que nos de feminino. Consequentemente estabelecemos em separado os níveis normais de proteínas totais do LCR-SO para pessoas do sexo masculino e feminino. As taxas médias de proteínas totais do LCR-SO de pessoas do sexo masculino e feminino são de 28,76 e 23,91 mg/100 ml, respectivamente; os limites normais vão de 16,96 a 47,13 mg/100 ml para o sexo masculino e de 14,76 a 42,76 mg/100 ml para o sexo feminino.The total protein content of CSF collected from the cisterna magna (cisternal fluid of 98 patients (58 males and 40 females with no neurological diseases was determined by the colorimetric method devised by Lowry and co-workers. This method has been previously chosen based mainly on it's sensitivity, accuracy and low fluid consumption. The CSF samples were normal with regard to pressure, color, citology and it's content in glucose, chloride and urea. Complement fixation tests for syphilis and cisticercosis, as well as the globulin tests (Pandy, Nonne — Appelt and Takata-Ara were negative. The average value and the normal range of cisternal fluid total protein was calculated for the mixed population (males and females. The mean protein value was 26.78 mg/100 ml, the lower and upper limits were respectively 13.20 and 40.36 mg/100 ml. These data are higher than those stated in some publications, and

  1. Validação de dados termopluviométricos obtidos via sensoriamento remoto para o Estado de São Paulo Validation of temperature and rainfall data obtained by remote sensing for the State of Sao Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Ludmila B. Camparotto

    2013-06-01

    Full Text Available Dados termopluviométricos são utilizados em diversos estudos. Contudo, a escassez de dados resultante da baixa densidade de estações meteorológicas é um problema frequentemente encontrado. Com isto, a utilização de dados estimados por satélites tem-se mostrado importante para regiões nas quais eles são escassos. Neste trabalho foram realizadas comparações entre dados mensais de precipitação pluvial estimados pelo satélite TRMM e de temperatura, estimados pelo satélite Aqua/MODIS aos dados observados por estações de superfície, para diferentes localidades do Estado de São Paulo, no período de 2003 a 2010. Os resultados demonstraram que para os dados de precipitação pluvial os menores erros foram observados nos meses de inverno e os maiores nos meses de verão. Em relação aos dados de temperatura observou-se que, com a inclusão de um fator de correção, os dados do satélite Aqua apresentaram boa exatidão em todos os meses. De maneira geral, os resultados obtidos indicam que os satélites TRMM e Aqua são alternativas eficientes na aquisição de informações em locais onde há falhas ou escassez dos mesmos podendo ser também utilizados na análise da consistência de dados coletados por meio de redes meteorológicas.Temperature and rainfall data are used in several scientific studies. However, the paucity of data resulting from the low density of weather stations is a problem frequently encountered in these studies. Thus, the use of estimated data from satellites has become an important tool in regions where they are scarce. In this study comparisons were made between monthly rainfall data estimated by TRMM satellite and temperature data estimated by the satellite Aqua/MODIS data observed by surface stations, for different locations in the State of Sao Paulo during the period 2003 to 2010. The results showed that for the rainfall data, smaller errors were observed during the winter and higher during the summer

  2. Microbiota of sausages obtained by spontaneous fermentation produced in the South of Brazil Microbiota de salames obtidos por fermentação espontânea produzidos no Sul do Brasil

    Directory of Open Access Journals (Sweden)

    Osmar Roberto Dalla Santa

    2012-12-01

    acima de 10(8 ufc.g-1. A concentração de Micrococcaceae, na maioria das amostras, ficou entre 10(5 e 10(7 ufc.g-1. Em relação à concentração de bolores e leveduras, houve uma grande variação entre as amostras, com quantidades próximas a 10² ufc.g-1 até 10(6 ufc.g-1. Pelos dados obtidos, concluiu-se que, das amostras analisadas, 24% estão em desacordo com as normas vigentes no Brasil, pois apresentam quantidades superiores do máximo permitido para coliformes a 45 ºC ou Staphylococcus coagulase positiva.

  3. The Radiation Induced Graft Copolymerization of Methacrylic Acid to Nylon; Copolymerisation par greffe de l'acide methacrylique sur le nylon, provoquee par irradiation; Obluchenie vyzyvaet graft-kopolimerizats yu metakrilovoj kisloty v nejlone; Injerto del acido metacrilico en el nylon por copolimerizacion radioinducida

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R; Thomas, J K

    1960-07-15

    The grafting of methacrylic acid to nylon by the preirradiation technique has been studied. The rate of grafting is appreciably larger than that of homopolymerization. No simple relation exists between reaction rate and total dose. The temperature dependence of the rate of grafting to the fibre, preirradiated in air, indicates that initiation of grafting is likely to take place by decomposition of peroxide groups formed on irradiation. Electrical resistance measurements on the irradiated fibre indicate that this has been reduced by a factor of 10. (author) [French] On a etudie le greffage de l'acide methacrylique sur du nylon par la technique de preirradiation. La vitesse du greffage est sensiblement plus grande que celle de l'homopolymerisation. Il n'existe pas de rapport simple entre la vitesse de reaction et la dose totale. Le fait que la vitesse du greffage sur la fibre, pre-irradiee a l'air, depend de la temperature, indique que l'amorcage de la greffe est susceptible d'etre provoque par la decomposition des groupements de peroxyde formes lors de l'irradiation. Les mesures de resistance electrique effectuees sur la fibre irradiee indiquent que cette resistance a ete reduite au dixieme de la valeur originale. (author) [Spanish] Al estudiar la copolimerizacio n de injerto del acido metacrilico en el nylon por el procedimiento de preirradiacion, los autores comprobaron que la velocidad de injerto es sensiblemente mas elevada que la de homopolimerizacion. No existe una relacion sencilla entre la velocidad de reaccion y la dosis total. La influencia de la temperatura sobre la velocidad de injerto en la fibra previamente irradiada en aire indica que el proceso se inicia por descomposicion de los grupos peroxido formados durante la irradiacion. Las mediciones efectuadas demuestran que la resistencia electrica de la fibra irradiada solo alcanza la decima parte de la correspondiente a la fibra no tratada. (author) [Russian] Bylo provedeno izuchenie prosachivaniya

  4. Estabilidade dimensional dos moldes de poliéter e polissulfeto obtidos com a técnica do casquete de acrílico, vazados em gesso pedra especial tipo IV e V = Dimensional stability of polyether and polysulfide impression materials obtained with acrylic coping techniques pouring in stone type IV and V

    Directory of Open Access Journals (Sweden)

    Alves, Maria Cechinel

    2005-01-01

    Full Text Available O propósito deste estudo foi verificar o comportamento de moldes de polissulfeto (Permlastic e poliéter (Impregum Soft obtidos por meio da técnica do casquete de resina acrílica. Avaliou-se a estabilidade dimensional dos moldes confeccionados de uma matriz metálica contendo dois preparos protéticos, com diâmetros e alturas diferentes. Os moldes de cada material foram vazados com gessos pedra IV (Vel-mix e gesso pedra V (Exadur, perfazendo um total de quatro combinações experimentais: (polissulfeto/gesso-pedra IV, polissulfeto/gesso-pedra V, poliéter/gesso-pedra IV e poliéter/gesso-pedra V. Os troquéis de gesso foram mensurados com um paquímetro digital, 24 horas após sua obtenção. Os resultados obtidos foram submetidos a ANOVA a 5%. Pode-se concluir que os moldes de poliéter vazados com gesso pedra tipo V apresentaram melhor estabilidade dimensional em relação às outras condições experimentais

  5. NOTA PRÉVIA SOBRE ALGUNS DADOS BIONÔMICOS DO PREDADOR DE ABELHAS Apiomerus nigrilobus Stal, 1872 OBTIDOS EM CONDIÇÕES DE LABORATÓRIO PRELIMINARY NOTE ON BIONOMIC DATA OF THE HONEYBEE PREDATOR Apiomerus nigrilobus STAL, 1872 GOTTEN IN LABORATORY CONDITIONS

    Directory of Open Access Journals (Sweden)

    Érico Amaral

    2007-09-01

    Full Text Available

    Esta nota prévia apresenta alguns dados bionômicos do predador de abelhas Apiomerus nigrilobus Stal, 1872 obtidos sob condições de laboratório. O estudo foi realizado no Departamento de Entomologia da Escola Superior de Agricultura “Luiz de Queiroz” da Universidade do Estado de São Paulo, no período de março de 1972 a dezembro de 1973. O ciclo biológico médico constatado para este predador foi de 246 dias. Os autores apresentam três quadros que resumem os dados obtidos.

    This preliminary note presents some bionomics data of the honeybee predator Apiomerus nigrilobus Stal, 1872 obtained in laboratory. The study was conducted at the Agricultural College ";Luiz de Queiroz” U.S.P. — São Pau1o, Brazil, from March 1972 to December 1973. The evolutionary cycle of this predator, on an average, is 246 days. A table is presented showing the results.

  6. Comparative study of antibacterial and antifugal activity of callus culture and adult plants extracts from Alternanthera maritima (Amaranthaceae Estudo comparativo da atividade antibacteriana e antifúngica de extratos obtidos da cultura de calos e da planta adulta de Alternanthera maritima (Amaranthaceae

    Directory of Open Access Journals (Sweden)

    Marcos J. Salvador

    2004-06-01

    Full Text Available The aim of this study was to evaluate the antibacterial and antifungal activity of callus culture (two different hormonal combination culture medium and adult plants (two collect extracts from Alternanthera maritima (Amaranthaceae investigating the maintenance of antimicrobial activity in vivo and in vitro. The antibacterial and antifungal activity was determined by the agar-well diffusion method against thirty strains of microorganisms including Gram-positive and Gram-negative bacteria, yeasts and dermatophytes. All the organic crude extracts studied were bioactive. Extracts of aerial parts and roots of adult plants collected during the same period of years of 1995 and 1998 (Restinga de Maricá (RJ, collect 1 and 2 inhibited the growth of several microorganisms (bacteria, yeasts and dermatophytes with inhibition halo between 6 and 20 mm. Plant cell callus culture extracts obtained from two culture conditions were also bioactive. Thus, the positive results suggest that the A. maritima extracts should be further studied to determine the bioactive chemical compounds as well as to understand the possible mechanisms of action and evaluate their toxicity looking toward a pharmaceutical employment.Neste estudo procedeu-se a avaliação da atividade antibacteriana e antifúngica dos extratos brutos de Alternanthera maritima (Amaranthaceae planta in natura de duas coletas distintas e obtidos por cultura de células buscando-se averiguar a manutenção da atividade antimicrobiana dos extratos obtidos da planta in vivo e in vitro. A ação antibacteriana e antifúngica foi determinada pelo método de difusão em ágar (técnica do poço utilizando-se trinta cepas de microrganismos indicadores (bactérias Gram-positivas e Gram-negativas, leveduras e dermatófitos. Todos os extratos obtidos com solventes orgânicos avaliados apresentaram-se bioativos com halos de inibição de 6 a 20 mm. Os extratos da planta in natura das duas coletas (Restinga de Marica

  7. Nucleic Acids and Protein Metabolism of Bone Marrow Cells Studied by Means of Tritiumlabelled Precursors; Etude du Metabolisme des Acides Nucleiques et des Proteines dans les Cellules de la Moelle Osseuse, a l'Aide de Precurseurs Trities; 0418 0437 0443 0414 ; Estudio con Ayuda de Precursores Tritiados del Metabolismo de los acidos Nucleicos y de las Proteinas en las Celulas de la Medula Osea;

    Energy Technology Data Exchange (ETDEWEB)

    Gavosto, F. [Istituto di Clinica Medica Generale e Centro di Studi Fisico-Biologici, Universita de Turin, Turin (Italy)

    1962-02-15

    . L'auteur examine ensuite la diminution et la dissociation du metabolisme de l'ARN et des proteines, dans les cellules de sujets atteints de leucemie aiguee, par rapport aux anomalies bien connues que presente le processus de maturation de ces cellules. (author) [Spanish] El autor examina las ventajas que presenta el empleo de los compuestos marcados con tritio en la tecnica autorradiografica. En efecto, los electrones emitidos por el tritio tienen una energia maxima de 0,018 MeV, que corresponde, aproximadamente, a un alcance de 1 miera en una emulsion fotografica y permiten, por lo tanto, lograr el maximo poder de resolucion al nivel celular y subcelular. Ello es particularmente util para estudiar fenomenos metabolicos en tejidos que se componen, como en el caso de la medula osea, de celulas de varios tipos en diversos estados de diferenciacion. Esta tecnica se ha aplicado al estudio del metabolismo de los acidos nucleicos y de las proteinas en las celulas normales y leucemicas de la medula osea. El metabolismo del acido desoxirribonucleico se ha estudiado utilizando un precursor especifico, la timidina-{sup 3}H. Comparando los elementos normales y leucemicos que han alcanzado un grado de madurez analogo, se han observado diferencias significativas en el porcentaje de celulas marcadas. Especialmente, en los casos de leucemia aguda, se ha comprobado que la incorporacion de timidina en las celulas leucemicas disminuye muy notablemente. Se estima que estos resultados constituyen una prueba de que la capacidad de proliferacion de estas celulas disminuye en comparacion con la de los mieloblastos normales. Por este mismo procedimiento, se ha estudiado el metabolismo del acido ribonucleico y de las proteinas, utilizando como precursores uridina-{sup 3}H, leucina-{sup 3}H y fenilalanina-{sup 3}H. Actualmente, en biologia celular se admite sin reservas la existencia de una estrecha relacion entre el metabolismo del acido ribonucleico y el de las proteinas. Ademas, se ha

  8. Isotopic data to study the mechanism of the oxidation of mercaptoacetic acid; Donnees isotopiques pour l'etude du mecanisme d'oxydation de l'acide mercaptoacetique; Izotopnyj metod issledovaniya mekhanizma okisleniya merkapgouksusnoj kisloty; Estudio del mecanismo de oxidacion del acido mercaptoacetico por medio de datos obtenidos con radioisotopos

    Energy Technology Data Exchange (ETDEWEB)

    Gal, D [Central Isotope Laboratory, University of Szeged (Hungary); Guczi, L [Department of Radiology, Elelmiszeripari Kutato Intezet, Budapest (Hungary)

    1962-03-15

    }S augmentait considerablement le taux d'absorption d'oxygene, tant dans le processus de catalysation par le fer qu'en l'absence de fer. Au cours de la reaction, on a mesure la concentration du sulfure, son activite specifique et son activite totale. En. partant de ces donnees, et en utilisant la methode d'etude cinetique au moyen d'isotopes, mise au point par Neiman et ses collaborateurs, on a pu calculer le taux de formation de sulfure et le taux de son oxydation ulterieure. La comparison de ces donnees avec d'autres donnees cinetiques revele que l'oxydation de l'acide mercaptoacetique en phase liquide est une reaction en chaine ramifiee, l'un des principaux elements de cette chaine etant la formation de Na{sub 2}S et son oxydation ulterieure. On a constate en outre qu'il se forme du sulfate, lors de la reaction, mais seulement a partir du sulfure mineral. Le fer catalyse la formation de disulfure organique et, de ce fait, influe aussi sur la formation de sulfure. (author) [Spanish] Numerosos investigadores han estudiado la autooxidacion en fase liquida, por oxigeno molecular, de compuestos que contienen un grupo mercaptano; si bien han llegado a la conclusion de que se forman sulfuros en el curso de la reaccion, el mecanismo exacto del proceso no se conoce. Los autores estudiaron la autooxidacion del acido mercaptoacetico a 50{sup o} C y pH 8 en presencia de complexon IV y de hierro. Anadieron al sistema Na{sub 2}S marcado con {sup 35}S y comprobaron que este compuesto aumenta notablemente la velocidad de absorcion de oxigeno tanto en las reacciones catalizadas por hierro como en las que transcurren en ausencia de iones de este metal. En el curso de la reaccion, los autores midieron la concentracion del sulfuro, su actividad especifica y su actividad total. Gracias a estos datos y empleando el metodo isotopico cinetico establecido por Neiman y colaboradores, pudieron calcular la velocidad de formacion del sulfuro y la velocidad de su oxidacion subsiguiente. Por

  9. SOSTITUTI BIOLOGICI VASCOLARI A BASE DI ACIDO IALURONICO

    OpenAIRE

    Pandis, Laura

    2014-01-01

    The discovery of an adequate tissue substitute for the regeneration of small vessels has become one of the most debated issues in the last years. This is due to recent advances in regenerative medicine, which offers new cellular types and biomaterials, and the large clinical applications that this product may have, ranging from the replacement of the coronary vessels to correction of peripheral vascular malformations in pediatric patients. The biomaterials used so far for large caliber vascul...

  10. Quercetin and its analogues: optical and acido-basic properties

    Czech Academy of Sciences Publication Activity Database

    Biler, M.; Biedermann, David; Valentová, Kateřina; Křen, Vladimír; Kubala, M.

    2017-01-01

    Roč. 19, č. 39 (2017), s. 26870-26879 ISSN 1463-9076 R&D Projects: GA MŠk(CZ) LD15082; GA MŠk(CZ) LTC17009 Institutional support: RVO:61388971 Keywords : QUANTUM-CHEMICAL CALCULATIONS * ALPHA-L-RHAMNOSIDASE * ANTIOXIDANT ACTIVITY Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 4.123, year: 2016

  11. Validação de indicadores do consumo de alimentos e bebidas obtidos por inquérito telefônico em Belém, Pará, Brasil Validation of food and beverage indicators obtained by telephone survey in Belém, Pará State, Brazil

    Directory of Open Access Journals (Sweden)

    Alice Cristina Medeiros das Neves

    2010-12-01

    Full Text Available O objetivo deste trabalho foi avaliar a validade relativa dos indicadores de consumo de alimentos e bebidas obtidos pelo sistema de vigilância por entrevista telefônica (VIGITEL. Foi avaliada uma amostra aleatória (n = 100 da amostra total de aproximadamente dois mil adultos, estudada pelo sistema, em 2009, em Belém, Pará, Brasil. Os indicadores avaliados foram fatores de proteção (consumo adequado de frutas, legumes e verduras e de risco (consumo de gordura saturada, refrigerante e bebidas alcoólicas para doenças crônicas não transmissíveis. Compararam-se os resultados obtidos a partir de entrevista telefônica e de três recordatórios de 24 horas (padrão de referência. O padrão de referência evidenciou subestimação na frequência dos indicadores, à exceção de refrigerantes e bebidas alcoólicas. As médias das frequências do consumo foram, em geral, maiores no grupo exposto (entrevistados pelo VIGITEL. Não se pode concluir que o VIGITEL não seja um bom indicador de consumo, pois o padrão de referência também apresenta limitações, portanto o uso daquele como instrumento de monitoramento é justificável.The aim of this study was to evaluate the relative validity of indicators of food and beverage intake obtained from the telephone interview surveillance system (VIGITEL. A random sample (n = 100 was evaluated from the total sample of approximately two thousand adults studied by the system in 2009 in Belém, Pará State, Brazil. The indicators were protective factors (adequate consumption of fruit, vegetables, and leafy vegetables and risk factors (consumption of saturated fat, soft drinks, and alcoholic beverages for chronic non-communicable diseases. The telephone interview results were compared with those of three 24-hour recalls (reference standard. The reference standard showed underestimation in the indicators' frequency, except for soft drinks and alcoholic beverages. The mean consumption frequencies were

  12. Estabilidade da microestrutura e do teor de carotenóides de pós obtidos da polpa de pequi (Caryocar brasiliense Camb. liofilizada Stability of the microstructure and carotenoids contents of the freeze-dried pequi (Caryocar brasiliense Camb. pulp in the powdered form

    Directory of Open Access Journals (Sweden)

    Cibele Cristina de Oliveira Alves

    2008-12-01

    Full Text Available Pós obtidos a partir da polpa (mesocarpo interno de pequi (Caryocar brasiliense Camb. liofilizada, elaborados com adição de alcoóis (etanol e isopropanol, em concentrações de 0, 5 e 10% e de açúcares (sacarose e frutose, em concentrações de 0, 5 e 10%, foram desenvolvidos neste trabalho. Análises microestruturais por microscopia fotônica dos pós de pequi liofilizados foram feitas para visualizar o grau de cristalinidade. Também foram feitas análises de cor usando colorímetro Minolta e dos teores de carotenóides totais por espectrofotometria. Os resultados mostraram que tratamentos constituídos da combinação de sacarose e etanol foram os que apresentaram formação de estruturas cristalinas e melhor preservação dos carotenóides. O teor de carotenóides nos pós obtidos da polpa de pequi liofilizada é mais bem preservado quanto maior for a concentração do álcool adicionado nos pré-tratamentos. Tratamentos com frutose e isopropanol produziram pós tipicamente amorfos, com ocorrência do fenômeno de caking. Pré-tratamentos com sacarose e etanol são os indicados para a produção de pós de pequi liofilizados com estabilidade físico-química e microestrutural.In this study, food powders obtained from the freeze-dried pequi (Caryocar brasiliense Camb. pulps (internal mesocarp were developed by adding alcohols (ethanol and isopropyl alcohol in concentrations of 0, 5, and 10% and sugars (sucrose and fructose in concentrations of 0, 5, and 10%. Microstructure analyses by photonic microscopy of the freeze-dried powders were used to evaluate the degree of crystallization. Color analyses using a Minolta colorimeter and the total carotenoid values using a spectrophotometer were also done. The results show that treatments with a sucrose and ethanol combination presented the formation of crystalline structures and the best preservation of the carotenoid contents. The higher the concentration of the alcohol added in the pre

  13. Recobrimentos de poli (tereftalato de etileno depositados em aço por aspersão térmica a partir de pós obtidos em diferentes condições de moagem Thermally sprayed coated carbon steel produced using PET powder obtained in different grinding conditions

    Directory of Open Access Journals (Sweden)

    Luciana Tavares Duarte

    2003-07-01

    Full Text Available Neste trabalho foram analisados recobrimentos de poli(tereftalato de etileno, PET, depositados em aço carbono através da técnica de aspersão térmica à combustão, e produzidos a partir de pós oriundos de processos de moagem, em moinho de bolas e de facas, de garrafas de PET pós-consumo. Algumas condições de moagem foram testadas, tendo-se obtido pós com diferentes características morfológicas. As características morfológicas dos pós e dos recobrimentos foram avaliadas por microscopia óptica e eletrônica, tendo-se observado que o recobrimento apresentava bolhas, provavelmente devido à degradação do polímero. Além disto, os recobrimentos produzidos, bem como as amostras de pó, foram caracterizados por espectroscopia na região do infravermelho, por calorimetria exploratória diferencial e através da determinação de viscosidade intrínseca em solução. Os resultados obtidos mostraram que é possível a produção de aço carbono recoberto com PET através da técnica de aspersão térmica, sendo que o grau de degradação, a morfologia e a distribuição granulométrica dos pós utilizados influenciaram significativamente as características e propriedades dos recobrimentos formados.The main purpose of this work was to study the production of a thermal spray coated poly(ethyleneterephthalate steel. Poly(ethylene terephthalate coatings were made of a thin grinding waste produced by a PET recycling company, and of a PET powder, which was obtained by grinding post-consumer beverage bottles. Some grinding conditions, using a ceramic ball mill, were studied. Scanning Electronic Microscopy (SEM and optical microscopy (OM were used in the study of powder and coating morphologies, and this analysis showed that PET coating presents bubbles due to polymer degradation. PET powder and coating characteristics were investigated using Differential Scanning Calorimetry (DSC and measurements of intrinsic viscosity. It was observed that

  14. Investigação da influência do processamento na dinâmica molecular de nanocompósitos de policarbonato e argila organofílica obtidos via intercalação por fusão

    Directory of Open Access Journals (Sweden)

    Elton J. da R. Rodrigues

    Full Text Available Nanocompósitos baseados em policarbonato e argila organofílica foram obtidos pelo método de intercalação por fusão em câmara de mistura sob diferentes valores de torque e temperatura. A influência desses parâmetros na qualidade da dispersão da argila na matriz polimérica foi investigada por ressonância magnética nuclear (RMN de baixo campo, empregando o tempo de relaxação longitudinal, T1H, e por difração de raios X. As diferenças nos tempos de relaxação longitudinal e nos padrões de difração de raios X foram correlacionadas com a formação de domínios com mobilidades distintas. O nanomaterial formado apresentou morfologia intercalada com afastamento crescente das camadas de argila, conforme as condições de processamento se tornavam mais severas. A RMN ¹H mostrou que tanto o cisalhamento quanto a temperatura afetaram a mobilidade das cadeias poliméricas, explicitando a homogeneidade crescente da distribuição dos domínios de relaxação, de acordo com o aumento do torque e da temperatura.

  15. Study of apoptotic mechanisms induced by all-trans retinoic acid and its 13-cis isomer on cellular lines of human hepato carcinoma Hep3B and HepG2; Estudio de los mecanismos apoptoticos inducidos por el acido retinoico todo-trans y su isomero 13-cis en las lineas celulares de hepatocarcinoma humano Hep3B y HepG2

    Energy Technology Data Exchange (ETDEWEB)

    Arce Vargas, Frederick [Costa Rica

    2006-07-01

    of these cells to different chemotherapeutic agents. Survivin might decrease the answer of treatment by to be anti-apoptotic and even to change the apoptosis by other forms of cellular death (necrosis, mitotic catastrophe, etc.) doing that therapy be less efficient. Hep3B cells were sensitized with ATRA before to be treated with 5-FU and it was observed a more cytotoxicity than when every drug was used separately. Also there were required concentrations lower of both agents to produce cellular death. This effect didn't see with HepG2 cells. Although retinoids seem to be promising in the hepato carcinoma treatment, it must do more studies to improve the bioavailability and to decrease the unspecific toxicity of these drugs, including combinations with other agents, use of liposomes or synthesis of compounds with effects more selective that might be even directed to certain specific routes of cellular death. (author) [Spanish] Dos lineas celulares de cancer de higado (Hep3B and HepG2) se incubaron durante diferentes periodos de tiempo con varias concentraciones de dos isomeros del acido retinoico (ATRA y 13-cis AR) y con los agentes quimioterapeuticos 5-FU, cisplatino y paclitaxel. Se determino si estas sustancias inducian citotoxicidad, apoptosis y si modificaban la expresion de diferentes genes relacionados con la muerte celular por apoptosis, en parte para poder explicar la resistencia del carcinoma hepatocelular a estas drogas. Las celulas HepG2 mostraron mayor resistencia que las celulas Hep3B a las 72 horas de tratamiento, tanto el ATRA como el 13-cis AR fueron toxicos. Tambien se demostro que producian apoptosis en las dos lineas celulares. Este tipo de muerte celular parece estar mediada por una disminucion en la concentracion de Bcl-xL en las celulas Hep3B tratadas con ambos retinoides y un aumento en la concentracion de Bax en las celulas HepG2 tratadas con 13-cis AR. Se observo proteolisis de procaspasas 3 y 8 en las celulas Hep3B, sugiriendo activacion de

  16. Avaliação das propriedades de fluxo dos granulados e dissolução de comprimidos de hidroclorotiazida 50 mg obtidos por granulação úmida Evaluation of the flow and the dissolution of 50 mg hydrochlorothiazide tablets obtained by wet granulation

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Lamolha

    2007-09-01

    Full Text Available O processo de granulação úmida ainda encontra larga aplicabilidade junto à moderna indústria farmacêutica para a produção de comprimidos, pois elimina alguns dos principais problemas atribuídos à compressão direta: a tendência de segregação e as baixas propriedades de fluxo dos pós durante o processo. O presente trabalho avalia e compara através de estudos micromeríticos e análise estatística as características de fluxo de granulados destinados ao desenvolvimento de comprimidos de hidroclorotiazida 50 mg. Foram testados três aglutinantes (pasta de amido e as dispersões aquosas, preparadas a frio, de amido pré-gelatinizado e povidone. Avaliou-se ainda a compatibilidade entre o fármaco e os excipientes empregados, através de estudos termoanalíticos (DSC, e a influência da adição extragranular do superdesintegrante crospovidone nos valores de eficiência de dissolução (%ED dos comprimidos obtidos. Os granulados obtidos apresentaram propriedades de fluxo e compressibilidade boas a excelentes, caracterizadas por: valores de índice de compressibilidade situados entre 5 e 15; proporções de Hausner inferiores a 1,25 e ângulos de repouso entre 30 e 35º. A adição de crospovidone não incrementou os valores de %ED das formulações desenvolvidas, nas condições experimentais empregadas, ainda que tenha reduzido, de forma pouco significativa, os tempos de desintegração das formulações.The wet granulation process still finds large applicability close to the modern pharmaceutical industry for the production of tablets, because it eliminates some of the main attributed problems of the direct compression: the segregation tendency and the low flow properties of the powders during the process. The present work evaluates and it compares through micromeritical studies and statistical analysis the flow characteristics of granulates destined to the development of tablets of hydrochlorothiazide 50 mg. Three binders were

  17. Dimensional Evaluation of Stone Die from Irreversíble Hydrocolloid Impression afther Disinfection Avaliação Dimensional de Troquéis de Gesso Obtidos de Moldes de Hidrocolóide Irreversível após Desinfecção

    Directory of Open Access Journals (Sweden)

    Marcos Frossard

    2004-10-01

    Full Text Available During routine molding procedures in Dentistry, the material gets in touch with oral fluids such as blood, saliva, exudates and others, which can carry pathogenic microorganisms that cause contagious diseases such us herpes, hepatitis, tuberculosis, AIDS, among others. Disinfection by immersing the molds in chemical solutions has been adopted. This work evaluated dimensional alterations in casts obtained from an irreversible hydrocolloid, after disinfection. A molding device with a standard metallic die representing the tooth ready to receive the crown was used during the evaluation. The molds were then immersed in deionized water and gluteraldehyde at 2% for 30 minutes. Only the control group was not immersed: they were poured in a special type IV (Durone, immediately after being taken. A special standard metallic crown, which adapted itself to the referred casts, was used to evaluate their dimensions. The combination die plus standard crown was submitted to a microscopic analysis by a depth microscope. Data from the evaluation were submitted to a statistical analysis, and the results showed no statistically difference among the groups studied. Nos procedimentos de moldagens, rotineiramente executados em Odontologia, os materiais entram em contacto com fluidos bucais, como: sangue, saliva, exudatos e outros que podem conter microorganismos patogênicos e, pelos moldes, podem transmitir doenças infecto-contagiosas como: herpes, hepatite, tuberculose, AIDS, dentre outras. O tratamento por imersão desses moldes em substâncias químicas, tem sido adotado no sentido de promover a desinfecção dos mesmos. Este trabalho avaliou a alteração dimensional de troquéis de gesso obtidos de moldes de hidrocolóide irreversível (alginato, após desinfecção. Utilizou-se, para isso, um dispositivo de moldagem que contém um troquel-padrão metálico, representando um dente preparado para receber uma coroa. Após a obtenção dos moldes, os mesmos foram

  18. Caracterização química e bacteriológica de polpa e surimi obtidos do espinhaço residual da filetagem de tilápia Chemical and bacteriological characterization of minced fish and surimi obtained from fillet frames of tilapia

    Directory of Open Access Journals (Sweden)

    Silvia Conceição Reis Pereira Mello

    2010-03-01

    Full Text Available O objetivo deste estudo foi avaliar rendimentos, composição centesimal e características bacteriológicas da polpa e do surimi de tilápia obtidos a partir da desossa mecânica de espinhaços residuais da filetagem de peixes de 400 a 650 gramas e oriundos de unidade de processamento oficial. As amostras foram divididas em quatro lotes, com intervalos de prazo de coleta de dois meses. As análises realizadas foram determinação do rendimento, composição centesimal (umidade, proteína, lipídios e cinzas e análises bacteriológicas: contagem de Bactérias Heterotróficas Aeróbias Mesófilas (CBHAM e Psicrotróficas (CBHAP; isolamento e identificação de Salmonella spp., Staphylococcus coagulase positiva e Escherichia coli. Os rendimentos obtidos para a polpa e o surimi em relação aos espinhaços foram, respectivamente, de 17,96 e 13,61%, observando-se diferença significativa (PThe aim of this study was to assess the yields, proximate composition and bacteriological characteristics of minced fish and surimi obtained from tilapia (Oreochromis niloticus from 400 to 650 grams, recovered from fillet frames, after mechanical deboning. The samples were divided in four lots, collected each two months. The percentage yields were determined and the chemical analysis carried out included moisture, protein, lipids and ashes. Bacteriological analysis considered Heterotrophic Aerobics Mesophilics and Psychrotrophics bacteria count, isolation and identification of Salmonella spp., coagulase-positive Staphylococcus and Escherichia coli. The yields obtained from minced fish and surimi, in relation with fillet frames, were 17.96% and 13.61% with significant gaps (P<0.05 between samples. The moisture, proteins, lipids and ashes percentage rate were for the minced fish: 80.69, 16.5, 3.14 and 0.50 and for the surimi: 80.82, 14.6, 0.27, and 0.98, with significant gaps (P<0.05 for lipids and ashes. The counted Mesophilics and Psychrotrophics Bacteria in the

  19. Avaliação da qualidade tecnológica de snacks obtidos por extrusão de grão integral de amaranto ou de farinha de amaranto desengordurada e suas misturas com fubá de milho Quality assessment of snacks obtained by extrusion of whole amaranth grains or defatted amaranth flour and their mixtures with corn grits

    Directory of Open Access Journals (Sweden)

    Vanessa Dias Capriles

    2012-03-01

    Full Text Available Apesar dos benefícios nutricionais e de seu potencial como alimento funcional, o amaranto ainda é um alimento pouco difundido no Brasil. Para o aumento do consumo desta matéria-prima, preconiza-se a sua incorporação na formulação de produtos convencionais, como os snacks extrudados que vêm sendo elaborados com a farinha de amaranto desengordurada. Pouco tem sido pesquisado sobre a extrusão direta do grão integral de amaranto, o que permitiria eliminar as etapas de moagem e de desengorduramento. Assim, a pesquisa avaliou e comparou a qualidade tecnológica de snacks obtidos por extrusão de grão integral de amaranto e de farinha de amaranto desengordurada, e suas misturas com 25 e 50% de fubá de milho. Verificou-se que o teor de lipídeos presentes no grão de amaranto (8% prejudicou a expansão e a textura dos extrudados. Mesmo com a adição de fubá de milho, os snacks extrudados à base de grão integral de amaranto foram rejeitados sensorialmente (aceitação global entre 3 e 4, numa escala hedônica estruturada de nove pontos, pois apresentaram baixa expansão, textura dura, cor escura e forte sabor residual. Já os snacks extrudados obtidos com farinha de amaranto desengordurada isoladamente e em combinação com fubá de milho apresentaram maior expansão, textura crocante e cor mais clara, e, por isso, maior aceitabilidade (aceitação global > 5. Conclui-se, nas condições do experimento, que não foi possível obter snacks extrudados à base de grãos de amaranto de boa aceitação e que a produção de snacks extrudados à base de farinha de amaranto desengordurada proporciona produtos com melhor aceitação por parte do consumidor.Despite its nutritional benefits and potential as a functional food, amaranth is still little known in Brazil. In order to increase its consumption, the inclusion of amaranth in the formulation of conventional products has been recommended, such as in extruded snacks, which are being prepared

  20. Digestibilidade dos nutrientes e parâmetros ruminais de bovinos de corte alimentados com rações contendo bagaço de cana-de-açúcar obtido pelo método de extração por difusão ou por moagem convencional Digestibility of nutrients and ruminal characteristics in beef cattle fed rations containing sugarcane bagasse obtained by diffusion or conventional milling extraction method

    Directory of Open Access Journals (Sweden)

    Mário Márcio Arakaki Rabelo

    2008-09-01

    Full Text Available Objetivou-se com este trabalho avaliar o efeito da utilização do bagaço de cana-de-açúcar in natura (BIN, obtido pelo método de extração do açúcar por difusão (BINdif ou moagem convencional (BINmoa como fonte de fibra íntegra, associado ao bagaço tratado sob pressão e vapor (BTPV sobre a digestibilidade dos nutrientes e os parâmetros ruminais de bovinos de corte. Quatro machos da raça Nelore, não-castrados, com fístulas ruminais e peso vivo médio inicial de 380 kg, foram distribuídos em delineamento experimental quadrado latino 4 × 4. Os tratamentos foram compostos das combinações dos bagaços: 5% BINmoa + 45% BTPV; 5% BINdif + 45% BTPV; 10% BINdif + 40% BTPV; 15% BINdif + 35% BTPV. A utilização do BIN obtido por difusão, mesmo no nível mais elevado, não teve efeito sobre a digestibilidade dos nutrientes (MS, MO, PB, FDN, FDA e EE da dieta. Entretanto, o fornecimento do bagaço obtido por difusão provocou redução nos consumos de MS, MO, PB e FDN em relação ao bagaço obtido por moagem. A produção total de ácidos graxos voláteis no rúmen, a porcentagem molar dos ácidos acético, propiônico e butírico, a relação acético/propiônico, o pH ruminal e a concentração ruminal de nirogênio amoniacal não diferiram entre os bagaços fornecidos. A utilização do bagaço obtido pelo processo de difusão ou de moagem convencional como fonte de fibra íntegra associado ao bagaço tratado sob pressão e vapor não prejudicou a digestibilidade dos nutrientes e os parâmetros ruminais de bovinos de corte alimentados com rações contendo 50% de concentrado.The objective of this study was to evaluate the effects of feeding sugarcane bagasse, obtained by extraction of sugar using diffusion (BINdif or conventional milling (BINmoa method, as a fiber source associated with bagasse treated under pressure and steam (BTPV on nutrient digestibility and ruminal characteristics in beef cattle. Four Nellore young bulls (380 kg

  1. Geração de Isolinhas, com dados obtidos por levantamento GPS/L1L2, mediante a técnica de Redes Neurais Artificiais = Generation of Isolines using GPS/L1L2 data and Artificial Neural Network technique

    Directory of Open Access Journals (Sweden)

    Elaine Cristine Barros de Souza

    2006-07-01

    Full Text Available O objetivo deste trabalho é mostrar uma alternativa para o processo deinterpolação empregado em Modelagem Digital do Terreno. Utilizando-se dados de levantamentos GPS coletados por meio de posicionamento relativo cinemático realizou-se um processo de interpolação por meio de Redes Neurais Artificiais (RNA. Os resultados foram comparados com os dados obtidos usando-se o algoritmo de interpolação Inverso doQuadrado de uma Distância (IQD para avaliar o comportamento das grades geradas por meio de análises qualitativas (isolinhas e MDT e quantitativas (resíduos. Conclui-se que o método testado é viável se comparado com o algoritmo IQD e, portanto, o uso de RNA apresenta-se adequado para a interpolação de dados GPS provenientes do processamento de fase das portadoras L1 e L2.The objective of this work is to show an alternative for theinterpolation process used in Digital Terrain Modeling. GPS surveying data of a kinematic relative positioning were interpolated by means of Artificial Neural Networks (ANN algorithm. The performance of the generated gridding was compared to the Inverse Square Distance interpolation algorithm data by means of qualitative (isolines and DTM and quantitative (residuals analyses. In conclusion, the tested method is viable if compared to the algorithm Inverse of the Square of a Distance. Therefore, the use of ANN is suitable for the interpolation of GPS data obtained from the L1 and L2 carriers phase processing.

  2. Avaliação do progresso genético obtido em 22 anos no melhoramento do arroz irrigado em Minas Gerais Evaluation of the genetical progress obtained in 22 years on the improvement of irrigated rice in Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Patrícia Guimarães Santos

    1999-10-01

    Full Text Available O objetivo deste trabalho foi avaliar o desempenho do programa de melhoramento genético do arroz irrigado, no Estado de Minas Gerais. Foram utilizados os dados de produtividade de grãos dos ensaios comparativos avançados de cultivares e linhagens de arroz irrigado, conduzidos em várias microrregiões do Estado de Minas Gerais, durante o período de 1974/75 a 1995/96. O ganho genético médio obtido em todo o período foi de 33 kg/ha/ano (0,98%, sendo altamente significativo (PThe goal of this work was to evaluate the performance of the genetical improvement program of irrigated rice in the State of Minas Gerais, Brazil. The grain yield data of the advanced comparative trials of both cultivars and lines of irrigated rice, conducted in several regions of the State of Minas Gerais over the period of 1974/75 to 1995/1996 were utilized. The average genetical gain obtained was of 33 kg/ha/year (0.98%, being highly significant (P< 0.01. The 22 year period was subdivided into two phases: at the first phase (1974/75 to 1979/80, a gain of 203 kg/ha/year (6.06% was noticed, which was highly significant, and the second phase (1980/81 to 1995/96 presented a gain of 15 kg/ha/year (0.25% being non significant. The high gain of the first phase is ascribed to the replacement of traditional high size and poor yielding potential for breeding materials such as Inca, BG 90-2 and MG 2. In the second phase of the program, increased attention was given to obtain materials more resistant to diseases and with better grain quality and non-significant gains for yield were obtained.

  3. Biofilmes nanocompósitos obtidos de isolado proteico de corvina (Micropogonias furnieri e Montmorilonita: avaliação das propriedades físicas, mecânicas e de barreira Nanocomposite biofilms obtained from Whitemouth croaker (Micropogonias furnieri protein isolate and Monmorilonite: Evaluation of the physical, mechanical and barrier properties

    Directory of Open Access Journals (Sweden)

    William Renzo Cortez-Vega

    2013-01-01

    Full Text Available O objetivo deste trabalho foi avaliar as propriedades de biofilmes nanocompósitos de isolado proteico de corvina (Micropogonias furnieri com argila organofílica. Inicialmente, foi obtido isolado proteico de corvina (IPC utilizando-se o processo de mudança de pH. O IPC foi obtido a partir de subprodutos da industrialização de corvina. Para o desenvolvimento dos filmes, foi executado um planejamento experimental de Box e Behnken, com três níveis de IPC (2; 3,5; 5 g.100 g-1 de solução, argila montmorilonita MMT (0,3; 0,5; 0,7 g.100 g-1 de solução e glicerol (25, 30, 35 g.100 g-1 IPC. Os filmes poliméricos foram desenvolvidos pela técnica de casting. Os valores de resistência à tração variaram entre 7,2 e 10,7 MPa, e os valores de alongamento, de 39,6 a 45,8%. Os valores de permeabilidade ao vapor de água (PVA variaram entre 3,2 e 5,5 g mm m-2 d-1kPa-1. O IPC apresentou teor médio de proteína de 97,87% (b. s.. Pode-se concluir que os filmes nanocompósitos produzidos a partir de IPC com MMT foram promissores, desde o ponto de vista das propriedades mecânicas, da aparência visual e do fácil manuseio até a baixa permeabilidade ao vapor de água e a baixa solubilidade. Com relação às propriedades mecânicas, as concentrações de IPC e MMT foram os principais fatores que influenciaram o desenvolvimento dos filmes nanocompósitos. Os resultados obtidos no planejamento experimental utilizado indicaram que 3,5 g de IPC.100 g-1 de solução, 0,5 g de MMT.100 g-1 de solução e 30 g de glicerol.100 g-1 IPC seriam os parâmetros ideais para a preparação de filmes nanocompósitos por casting.The objective of this study was to evaluate the properties of nanocomposite biofilms based on Whitemouth croaker (Micropogonias furnieri protein isolate with organophilic clays. Initially the croaker protein isolate (CPI was obtained using the pH shifting process from by-products of croaker industrialization. A Box and Behnken experimental

  4. The Treatment of Cancer by a Radioactive Drug: Tritium-Labelled Tetra-Sodium 2-Methyl-1:4-Naphthaquinol Diphosphate; Traitement du Cancer par un Remede Radioactif: Le Diphosphate Tetrasodique de Methyl-2 Naphtoquinone-1,4 Tritie; 041b 0435 0447 0435 043d 0414 ; Tratamiento del Cancer con la Sal Tetrasodica del Acido 2-Metil-1,4-Naftoquinon Difosforico Marcada con Tritio

    Energy Technology Data Exchange (ETDEWEB)

    Marrian, D. H.; Marshall, Barbara; Mitchell, J. S.; Simon-Reuss, I. [Department of Radiotherapeutics, University of Cambridge, Cambridge (United Kingdom)

    1962-02-15

    tetrasodica del acido 2-metil-l,4-naftoquinon-difosforico (''Synkavit'' Roche), asi como algunos de los metodos que se han empleado para marcar este y otros compuestos analogos. Sintetizaron el compuesto tritiado en forma de obtener una substancia radioquimicamente pura de 28 c/mmol (1 atomo de tritio por molecula) de actividad especifica. Demuestran que este producto penetra muy rapidamente en las celulas vivas, tanto in vivo como in vitro y que, en igualdad de condiciones los cultivos de celulas malignas incorporan en grado mucho mayor el compuesto marcado que los cultivos de celulas normales. Describen las investigaciones preliminares del empleo clinico de ese producto en casos avanzados de tumores malignos que suelen ser refractarios a otros tratamientos, observandose que la medula osea absorbe menor cantidad del compuesto que el tumor (en algunas ocasiones, hasta cinco veces menos). (author) [Russian] Dejstvie tetrasoda - 2-metil-1: 4- naftagidrohinondifosfata (Sinkavit - proizvodstvo Roshe) v kachestve radio- senitajzera obsuzhdaetsja narjadu s bolee rannimi metodami mechenija jetih i podob- nyh molekul. Sintez jetogo soedinenija, mechennogo tritiem, byl sdelan dlja togo, chtoby polu- chit' radiohimicheskoe chistoe lekarstvo s udel'noj aktivnost'ju v 28 kjuri/mil- limol' (odin atom tritija na molekulu). Budet pokazano, chto jeto soedinenie bystro vhodit v zhivuju kletku kak v este- stvennyh, tak i i laboratornyh uslovijah i chto kul'tury zlokachestvennyh kletok pogloshhajut mechenye atomy v gorazdo bol'shem ob{sup e}me, chem kul'tury normal'nyh kletok pri teh zhe uslovijah. Budut opisany predvaritel'nye issledovanija primenenija jetogo lekarstva na pacientah, imejushhih zlokachestvennye opuholi i nahodjashhihsja v tjazhelom ili neizlechimom sostojanii; usvoenie kostnym na kojefficient 5 mozgom nizhe, chem usvoenie opuhol'ju. (author)

  5. Validade de indicadores do consumo de alimentos e bebidas obtidos por inquérito telefônico Validez de indicadores de consumo de alimentos y bebidas obtenidas por encuesta telefónica Validity of food and beverage intake data obtained by telephone survey

    Directory of Open Access Journals (Sweden)

    Carlos Augusto Monteiro

    2008-08-01

    Full Text Available OBJETIVO: Avaliar a reprodutibilidade e a validade de indicadores do consumo de alimentos e bebidas obtidos por sistema de vigilância baseado em inquéritos telefônicos. MÉTODOS: Foram realizadas análises de reprodutibilidade e validade em duas subamostras aleatórias (n=112 e n=109, respectivamente da amostra total (N=2.024 de adultos (>18 anos estudada pelo sistema em 2005 no município de São Paulo. Os indicadores avaliados incluíram fatores de proteção (consumo diário ou quase diário de frutas e hortaliças e de risco (consumo diário ou quase diário de refrigerantes, consumo habitual de alimentos fontes de gorduras saturadas de origem animal, e consumo abusivo de bebidas alcoólicas para doenças crônicas. Para a análise de reprodutibilidade compararam-se resultados obtidos a partir da entrevista telefônica original do sistema e de outra entrevista idêntica repetida após sete a 15 dias. Para a análise de validade compararam-se resultados obtidos a partir da entrevista telefônica original e de três recordatórios de 24 horas (padrão-ouro realizados até 15 dias após a entrevista original. RESULTADOS: A freqüência dos indicadores estudados mostrou-se relativamente constante entre a primeira e a segunda entrevistas telefônicas e os coeficientes kappa se situaram entre 0,57 e 0,80, indicando boa reprodutibilidade de todos os indicadores. Relativamente ao padrão-ouro, evidenciou-se tendência de superestimação na freqüência do consumo de alimentos protetores, mas não na freqüência de alimentos associados a risco para doenças crônicas. Sensibilidade e especificidade foram elevadas para indicadores do consumo de alimentos associados a risco (próximas a 80% e variáveis no caso de alimentos protetores (entre 42% e 80%. CONCLUSÕES: A avaliação indicou boa reprodutibilidade e adequada validade para a maioria dos indicadores empregados pelo sistema, o que indica que a manutenção da sua operação nos pr

  6. Validade de indicadores de atividade física e sedentarismo obtidos por inquérito telefônico Validad de indicadores de actividad física y sedentarismo obtenidos por encuesta telefónica Validity of indicators of physical activity and sedentariness obtained by telephone survey

    Directory of Open Access Journals (Sweden)

    Carlos Augusto Monteiro

    2008-08-01

    Full Text Available OBJETIVO: Avaliar a reprodutibilidade e a validade de indicadores de atividade física e sedentarismo, obtidos por sistema de vigilância baseado em inquéritos telefônicos. MÉTODOS: Foram realizadas análises de reprodutibilidade e validade em duas subamostras aleatórias (n=110 e n=111, respectivamente da amostra total (N=2.024 de adultos (>18 anos, estudada pelo sistema, no município de São Paulo, em 2005. Os indicadores avaliados incluíram a freqüência de "suficientemente ativos no lazer", "inativos em quatro domínios da atividade física (lazer, trabalho, transporte e atividades domésticas" e "ver televisão por longos períodos". A reprodutibilidade foi estudada comparando-se resultados obtidos a partir da entrevista telefônica original do sistema e de outra entrevista idêntica repetida após sete a 15 dias e feita por entrevistador diferente do que fez a entrevista original. A validade foi estudada comparando-se resultados obtidos a partir da entrevista telefônica original e de três recordatórios de 24 horas (método de referência realizados na semana seguinte à entrevista original. RESULTADOS: A freqüência dos três indicadores avaliados foi idêntica ou muito próxima entre a primeira e a segunda entrevistas telefônicas, e os coeficientes kappa se situaram entre 0,53 e 0,80, indicando boa reprodutibilidade de todos os indicadores. Relativamente ao método de referência, evidenciou-se especificidade de 80% ou mais para os três indicadores e sensibilidade de 69,7% para "ver televisão por longos períodos", 59,1% para "inativos em quatro domínios" e 50% para "suficientemente ativos no lazer". CONCLUSÕES: Os indicadores de atividade física e sedentarismo empregados pelo sistema aparentam ser reprodutíveis e suficientemente acurados. Se mantido em operação nos próximos anos, o sistema poderá oferecer ao Brasil um instrumento útil para avaliação de políticas públicas de promoção da atividade física e

  7. Efeito da desodorização nas características sensoriais de extratos hidrossolúveis de soja obtidos por diferentes processos tecnológicos Effects of deodorization on sensory characteristics of hydro soluble soybean extracts obtained from different technological processes

    Directory of Open Access Journals (Sweden)

    Roberto Machado de Moraes

    2006-03-01

    Full Text Available Os produtos derivados de soja apresentam múltiplas vantagens tecnológicas e nutricionais. Entretanto, eles são pouco aceitos pela população brasileira devido às características sensoriais indesejáveis, principalmente de odor e sabor. Uma alternativa para a remoção de compostos voláteis que conferem essas características é a desodorização. Extratos hidrossolúveis de soja, comumente conhecidos como leite de soja, foram obtidos por três processos diferentes e, posteriormente, desodorizados por vapor de água superaquecido à pressão atmosférica. Os produtos nas formas bruta e desodorizada foram avaliados sensorialmente por análise descritiva quantitativa. Os resultados mostraram eficiência da desodorização pela redução do odor de feijão cru e sabor residual, com aumento do sabor característico, nos processos de obtenção do leite por vaca mecânica e por maceração.The products obtained from the soybean have shown multiple technological and nutritious advantages but, in spite of that, they haven't been easily accepted by Brazilian consumers mainly because of their unpleasant sensory characteristics of odor and flavor. Deodorization can be a good and effective method in the attempt to remove the volatile compounds that produce these characteristics. Hydro soluble soybean extracts, commonly known as soybean milk, have been obtained from three different processes and, later on, submitted to deodorization process from steaming, at atmospheric pressure. The products, both in the natural and deodorized states, have been evaluated by Quantitative Descriptive Analysis. The results have shown that the deodorization process has been effective, reducing both the raw soybean odor and the aftertaste as well, improving the typical flavor in the processes of getting the milk from "mechanical cow" or maceration.

  8. Investigação da influência do processamento na dinâmica molecular de nanocompósitos de policarbonato e argila organofílica obtidos via intercalação por fusão On the influence of processing parameters on the molecular dynamics of melt intercalated polycarbonate-clay nanocomposites

    Directory of Open Access Journals (Sweden)

    Elton J. da R. Rodrigues

    2012-01-01

    Full Text Available Nanocompósitos baseados em policarbonato e argila organofílica foram obtidos pelo método de intercalação por fusão em câmara de mistura sob diferentes valores de torque e temperatura. A influência desses parâmetros na qualidade da dispersão da argila na matriz polimérica foi investigada por ressonância magnética nuclear (RMN de baixo campo, empregando o tempo de relaxação longitudinal, T1H, e por difração de raios X. As diferenças nos tempos de relaxação longitudinal e nos padrões de difração de raios X foram correlacionadas com a formação de domínios com mobilidades distintas. O nanomaterial formado apresentou morfologia intercalada com afastamento crescente das camadas de argila, conforme as condições de processamento se tornavam mais severas. A RMN ¹H mostrou que tanto o cisalhamento quanto a temperatura afetaram a mobilidade das cadeias poliméricas, explicitando a homogeneidade crescente da distribuição dos domínios de relaxação, de acordo com o aumento do torque e da temperatura.Polycarbonate-organofilic clay nanocomposites were obtained via the melt intercalation method in the blending chamber of a torque rheometer, under distinct values of shear and temperature. The influence of those processing parameters on the clay dispersion in the polymer matrix was probed by low-field nuclear magnetic resonance (NMR, using the T1H measurement technique and by wide angle X-ray scattering (WAXS. The differences in longitudinal relaxation times and in the X-ray reflection patterns were correlated with the formation of relaxation domains with particular molecular mobility, as progressively larger intercalated morphologies were found in the nanocomposites due to the increase of shear stress and temperature. ¹H NMR has shown that both shearing and temperature have played a fundamental part on the polymer chains mobility, which explains the increase in the domain´s homogeneity following the increment of those processing

  9. Propriedades tecnológicas e sensoriais de produto similar ao tofu obtido pela adição de soro de leite ao extrato de soja Sensorial and technologic properties of product similar to tofu obtained with whey and soymilk addiction

    Directory of Open Access Journals (Sweden)

    Sueli Ciabotti

    2009-06-01

    Full Text Available Objetivou-se neste trabalho verificar a viabilidade da substituição de parte do extrato de soja por soro de leite na obtenção de um produto similar ao tofu, coagulado com adição de ácido lático e glucona-δ-lactona, quanto aos aspectos tecnológicos e sensoriais. Foram obtidos produtos, elaborados a partir de extratos de soja, adicionados de soro proveniente da elaboração do queijo Mussarela. Foram utilizadas três diferentes combinações da mistura extrato de soja (ES e soro de leite (SL 40: 60; 30: 70; 20: 80, as quais sofreram ações dos coagulantes glucona-δ-lactona (GDL e ácido lático (AL isoladamente. Observou-se que o teor de umidade dos produtos elaborados com glucona-δ-lactona foi mais elevado (p This work aimed to verify the sensorial, technological viability of replacing part of soy milk extract with whey to obtain a product similar to tofu curdled by lactic acid and glucone-δ-lactone. Some products were obtained using soy milk extract and whey from the production of mozzarella cheese. Three different combinations of a mixture of soy milk extract and whey were used (40: 60; 30: 70; 20: 80, all of which were curdled with glucone-d-lactone and lactic acid separately. Products prepared with glucone-δ-lactone presented a higher moisture content (p < 0.05 and an increased crop yield. The products made with lactic acid were richer in protein. Curdling with lactic acid resulted in more firmness, cohesiveness, gumminess, and chewiness to the products. Analyzing the color, the "L" values (luminosity of 20: 80 ratio were higher, and the yellow "b" predominated in the products with a higher proportion of soy milk. The product with better acceptance was the one with 40: 60 ratio (soy milk and whey respectively obtained with the addition of glucone-δ-lactone. The use of glucone-δ-lactone resulted in a better yield, texture characteristics, and acceptability.

  10. ANÁLISE DA COMPOSIÇÃO QUÍMICA DO ÓLEO ESSENCIAL DE CAPIM SANTO (Cymbopogon citratus OBTIDO ATRAVÉS DE EXTRATOR POR ARRASTE COM VAPOR D´ÁGUA CONSTRUÍDO COM MATERIAS DE FÁCIL AQUISIÇÃO E BAIXO CUSTO

    Directory of Open Access Journals (Sweden)

    Felipe Maia Silva

    2014-08-01

    Full Text Available Os óleos essenciais são substâncias naturais de grande importância econômica, sendo utilizados em perfumaria, cosméticos, alimentos e medicamentos. São obtidos por diferentes métodos de extração e encontrados em diferentes partes de plantas aromáticas. Contudo, a aquisição de equipamentos para extração de óleos essenciais representa um custo significativo para as instituições de ensino e pesquisa do país, principalmente nos últimos anos em que tem ocorrido redução de investimentos nas áreas de Ciência e Tecnologia. Desta forma, esse trabalho teve como objetivo a construção de um extrator de óleo essencial utilizando materiais de fácil acesso e mão de obra local. O extrator construído possui as dimensões de 60 cm de altura e 30 cm de diâmetro. Seu aquecimento é realizado por resistência elétrica com temperatura controlada por termostato (faixa de 0 a 120°C e possui uma campânula metálica vedada por selo d’água que está acoplada a um sistema de condensação. O experimento teste foi realizado fazendo extração de 612 g de capim santo (Cymbopogon citratus. Após análise obteve-se um rendimento de 0,48% de óleo essencial na extração. Portanto, este trabalho demonstra a busca no desenvolvimento de tecnologias inovadoras, fazendo uso de materiais facilmente encontrados no mercado e utilizando mão de obra local, contribuindo, não só para o acúmulo de conhecimento acadêmico, mas, acima de tudo, com a capacitação de recursos humanos, geração de renda local e com a transferência de novas tecnologias que possam servir de base para a elaboração de novos produtos, neste caso, os óleos essenciais.

  11. Optimization of methods to assess mitochondrial DNA in archival paraffin-embedded tissues from mammary canine tumors Otimização dos métodos para avaliar o DNA mitocondrial obtido a partir de tumores mamários caninos incluídos em parafina

    Directory of Open Access Journals (Sweden)

    Angélica C. Bertagnolli

    2008-08-01

    Full Text Available In this study we describe the alterations used to extract and amplify mitochondrial desoxyribonucleic acid (DNA from formalin-fixed paraffin-embedded samples of canine mammary tumors. The epithelial and mesenchymal components (chondromyxoid and chondroid of each tumor, as well as the normal mammary gland tissues, were manually microdissected from 19 mixed canine mammary tumors (10 benign mixed tumors and nine carcinomas arising in mixed tumors. DNA was extracted by Invisorb® Spin Tissue Mini Kit, with protocol changes proposed by the manufacturer. A 273-bp fragment was amplified by polymerase chain reaction (PCR and submitted to automatic sequence analysis. The fragment was successfully analyzed in 100% of the samples. However, an additional lysis step, the reduction of volume in buffer solutions and PCR, a higher annealing temperature and an increase in the number of PCR cycles were required. The initial PCR products were diluted and re-amplified in six samples so that they could be successfully analyzed.A presente comunicação descreve as modificações usadas para extrair e amplificar o DNA mitocondrial obtido de amostras de tumores mamários caninos fixados em formol tamponado a 10% e incluídos em parafina. Os componentes epiteliais e mesenquimais (condromixóide e condróide, bem como a mama normal adjacente, foram microdissectados manualmente de 19 tumores mamários (10 tumores mistos benignos e nove carcinomas em tumores mistos. O DNA foi extraído utilizando-se o Invisorb® Spin Tissue Mini Kit com modificações do protocolo proposto pelo fabricante. Um fragmento de 273-pb foi amplificado por reação em cadeia da polimerase (PCR e seqüenciado em seqüenciador automático. O fragmento foi analisado em 100% das amostras, entretanto modificações como lise adicional, redução do volume das soluções de extração e PCR, aumento da temperatura de anelamento e do número de ciclos de amplificação foram necessárias. Em seis

  12. Efeitos do controle glicêmico obtido em curto prazo sobre a microalbuminúria e a filtração glomerular em pacientes diabéticos do tipo 2 com controle glicêmico precário

    Directory of Open Access Journals (Sweden)

    Clarissa Baia Bargas Uezima

    2012-06-01

    Full Text Available INTRODUÇÃO: O controle intensivo da glicemia reduz significativamente o risco de desenvolvimento de complicações microvasculares, incluindo a nefropatia. OBJETIVOS: Foi avaliado o impacto do controle glicêmico, por meio do cálculo da glicemia média semanal (GMS e variabilidade glicêmica (VG, sobre a pressão arterial (PA nas 24 horas (MAPA, excreção urinária de albumina (EUA e taxa de filtração glomerular (TFG. MÉTODOS: 53 pacientes com diabetes mellitus tipo 2 (DM2, dividida aleatoriamente em dois grupos para receber tratamento convencional ou intensivo. Esse último incluía visitas semanais para ajustes da medicação e aplicação de um plano educacional durante seis semanas. RESULTADOS: Observou-se controle glicêmico (GMS 120 mmHg e que se reduziu de 138,4 ± 10,1 para 127,8 ± 11,6 mmHg (p = 0,023 ao final das seis semanas. Foram observadas reduções da PAS e PA diastólica (PAD na vigília e durante o sono, que não ocorreram no grupo (n = 17 sem controle glicêmico e PAS >120 mmHg. Inicialmente, 15 pacientes apresentavam TFG >120 mL/min, sendo que após seis semanas, apenas o subgrupo que alcançou controle glicêmico (n = 7 mostrou redução de 137,2 ± 16 para 122,2 ± 25,2 mL/min (p = 0,02. No inicio do estudo, outros quinze pacientes apresentavam microalbuminúria. Após seis semanas, independente de terem alcançado o controle glicêmico preconizado, observou-se redução da EUA de 63,0 ± 43,1 para 24,8 ± 19,5 mg/g de creatinina (p = 0,02. CONCLUSÃO: Assim, o controle glicêmico obtido em curto prazo resultou na redução da PA, da TFG e da EUA nos pacientes com DM2 que apresentavam alterações desses parâmetros, alterações benéficas no que se refere à proteção renal.

  13. Resultados obtidos em mulheres portadoras de endometriose pélvica avançada e mulheres com ligadura tubária, submetidas a ICSI: análise comparativa Outcome of women with advanced pelvic endometriosis and women with tubal sterilization submitted to ICSI: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Tsutomu Aoki

    2005-10-01

    Full Text Available OBJETIVO: análise comparativa dos resultados obtidos em mulheres portadoras de endometriose pélvica avançada e mulheres com ligadura tubária, submetidas a injeção intracitoplasmática de espermatozóide (ICSI. MÉTODOS: noventa e três mulheres com diagnóstico de infertilidade, com ciclo menstrual normal, não submetidas a qualquer tratamento hormonal e cirúrgico durante o último ano, índice de massa corporal igual a 20-25, portadoras de ovários sem a presença de cistos ou tumores participaram deste estudo e foram divididas em dois grupos: tubário (TUB, 39 mulheres com ligadura tubária, e endometriose (EDT, 54 mulheres com EDT-III e EDT-IV, submetidas a indução ovulatória com FSH-r e ICSI. Os dados clínicos e laboratoriais foram comparados. Testes chi2, Fisher, t pareado, t de Student e Mann-Whitney foram empregados. RESULTADOS: níveis mais baixos de estradiol (2243,1 vs 1666,3; p=0,001 e número menor de folículos por paciente (16,9 vs 13,9; p=0,001 foram recuperados no grupo EDT, apesar da utilização de maior número de unidades de FSH-r (1775,6 vs 1998,6; p=0,007, para TUB e EDT, respectivamente. Não houve diferença quanto à taxa de recuperação ovocitária (69 vs 73,5%; p=0,071 assim como nas taxas de fertilização normal (83,7 vs 81,7%; p=0,563 respectivamente para TUB e EDT. No entanto, menor número de pré-embriões ótimos foi obtido no grupo EDT (36,4 vs 24,8%, respectivamente para TUB e EDT; p=0,005. As taxas de gestação total (41,0 vs 42,6%; p=0,950 e de implantação (13,9% x 14,5%; p=0,905 não foram significativamente diferentes quando TUB e EDT foram comparados. CONCLUSÕES: os ovários das mulheres do grupo EDT parecem ser menos responsivos à indução da ovulação com FSH-r. A endometriose parece comprometer o número médio de folículos e de pré-embriões ótimos sem prejudicar as taxas de recuperação ovocitária e fertilização. No entanto, uma vez formados, os pré-embriões do grupo EDT

  14. Nascimento de bezerros normais após inseminação artificial utilizando espermatozóides criopreservados obtidos de epidídimos refrigerados de bovinos após a morte Birth of normal calves after artificial insemination using cryopreserved spermatozoa obtained from refrigerated epididymides of death bovine

    Directory of Open Access Journals (Sweden)

    Priscila de Melo Costa

    2011-05-01

    Full Text Available O objetivo deste estudo foi avaliar as características morfológicas e funcionais dos espermatozóides bovinos recuperados de epidídimos resfriados por longos períodos e posteriormente criopreservados. Testículos bovinos foram coletados no abatedouro, transportados ao laboratório e armazenados a 5°C por 0, 24, 48 e 72 horas (n=10 para cada tratamento. Os espermatozóides foram extraídos de cada epidídimo, avaliados e diluídos em meio tris-gema-glicerol a 7% e criopreservados em nitrogênio líquido. As características morfológicas e funcionais dos espermatozóides foram avaliadas in vitro por análise microscópica e in vivo, por meio de inseminação artificial. Foram observadas alterações morfológicas características da imaturidade dos espermatozóides e redução da motilidade após 72 horas de refrigeração dos epidídimos. Esses parâmetros também foram alterados após o descongelamento, em todos os tratamentos. A manutenção dos espermatozoides a 5°C por 72h reduziu a motilidade espermática. Em todos os tratamentos foram observadas alterações morfológicas características da imaturidade dos espermatozoides e redução da motilidade após o descongelamento. A integridade de membrana plasmática e acrossoma somente foram afetadas pós criopreservação nos grupos mantidos a 5°C durante 48 ou 72h antes da criopreservação. Contudo, a capacidade de fecundação dos espermatozóides mantidos a 5°C durante 24 ou 72h antes da criopreservação foi suficiente para promover duas gestações e nascimento de bezerros saudáveis. Esses resultados indicam que a recuperação e a criopreservação de espermatozóides obtidos de epidídimos mantidos a 5°C, até 72h, provenientes de animais mortos é uma opção viável para preservar gametas masculinos para compor um banco de germoplasma.The objective of this study was to evaluate the morphological and functional characteristics of bovine spermatozoa retrieved from chilled

  15. Influence of puerperium on the serum proteins of Saanen goats, obtained by the analysis of electrophoresis on sodium dodecyl sulphate-polyacrylamide gel / Influência do puerpério sobre o proteinograma sérico de caprinos da raça Saanen obtido por eletroforese em gel de poliacrilamida

    Directory of Open Access Journals (Sweden)

    Eduardo Harry Birgel Junior

    2009-10-01

    (79 KDa, albumina (65 KDa, imunoglobulina G cadeia pesada(58 KDa, haptoglobina (45 KDa, glicoproteína ácida (37 KDa e imunoglobulina G cadeia leve (28 KDa. As outras 9 frações protéicas não identificadas apresentaram pesos moleculares iguais a 275 KDa, 140 KDa, 125 KDa, 103 KDa, 95 KDa, 41 KDa, 35 KDa, 30 Kda e 25 KDa. Os resultados obtidos permitem concluir que durante a primeira semana do puerpério ocorre um aumento das concentrações de glicoproteína ácida, enquanto as demais frações protéicas não sofrem influência do puerpério.

  16. Evaluation of pelvic varicose veins using color Doppler ultrasound: comparison of results obtained with ultrasound of the lower limbs, transvaginal ultrasound, and phlebography Avaliação de varizes pélvicas por Doppler colorido: comparação dos resultados obtidos com ultrassom dos membros inferiores, ultrassom transvaginal e flebografia

    Directory of Open Access Journals (Sweden)

    Fanilda Souto Barros

    2010-06-01

    étodos diagnósticos não-invasivos mais comumente usados para avaliar a insuficiência venosa pélvica, enquanto a flebografia ainda é considerada como o padrão-ouro. Objetivos: Determinar a prevalência de varizes dos membros inferiores originadas na pélvis em um grupo de pacientes do sexo feminino e determinar a concordância entre os resultados obtidos por Doppler colorido dos membros inferiores, ultrassom transvaginal e flebografia. Métodos: A AMOstra incluiu pacientes do sexo feminino encaminhadas para o laboratório vascular para triagem dos membros inferiores. As pacientes diagnosticadas com trombose venosa profunda foram excluídas. A análise dos dados incluiu o coeficiente de concordância kappa, o teste de McNemar e os valores de sensibilidade e especificidade. Resultados: De um total de 1.020 pacientes, 124 (12.2% tiveram achados compatíveis com refluxo de origem pélvica. Entre essas pacientes, 51 (41.2% eram casos recorrentes. Um total de 249 foram submetidas a ultrassom transvaginal. Houve concordância significativa entre os achados ultrassonográficos dos membros inferiores e os achados transvaginais. A flebografia foi realizada em 54 pacientes. A comparação entre o ultrassom transvaginal e a flebografia foi associada a 96.2% de sensibilidade e 100% de especificidade. Conclusões: OS AUTores chamam a atenção para a prevalência relativamente alta de varizes dos membros inferiores originadas na pélvis, sugerindo uma importante, embora subdiagnosticada, causa de varizes recorrentes.

  17. Comparação de azeites obtidos da cultivar portuguesa Galega Vulgar utilizando dois métodos de extracção Comparison of olive oil from Portuguese cultivar Galega Vulgar with two different methods of oil extraction

    Directory of Open Access Journals (Sweden)

    L. Torres Vaz-Freire

    2007-01-01

    Full Text Available A produção do azeite é uma das actividades agrícolas mais características da região mediterrânea e de importância relevante para a sua economia. O objectivo do trabalho foi o estudo da influência dos métodos da extracção na qualidade do azeite obtido. Incidiu principalmente sobre uma das cultivares recomendadas para os azeites de denominação origem protegida (DOP no Alentejo. Foi extraída azeite da variedade portuguesa, Galega Vulgar (Olea europaea L. subsp. europaea, colhida na região de Elvas nas campanhas de 2001 a 2004. Utilizou-se uma prensa hidráulica (extracção descontínua, Vieirinox, Portugal; e um “decanter” centrífugo de duas fases (extracção contínua, Oliomio, Itália. Nas azeitonas determinou-se o índice de maturação, fez-se o controle de pragas e avaliou-se o Índice de gordura (RMN. No azeite para além das análises químicas de controlo foi realizada a análise Sensorial com painel treinado e uma detecção electrónica de aromas (Alpha Mos Fox 3000. Os resultados preliminares mostram haver diferenças significativas para alguns dos parâmetros analisados no caso dos azeites. De todos os parâmetros em que se detectaram diferenças significativas apenas a acidez demonstrou alterações suficientes para classificar o azeite em outra categoria considerando a classificação estabelecida pelo Regulamento (CE N.º 1989/2003 de 6 de Novembro. Estudos como este são importantes na adaptação da tecnologia à variedade com o intuito de aumentar a eficiência de determinado processo tecnológico.Olive oil production is one of the important agricultural activities on the Mediterranean region and has a real impact on local economies. The objective of this work was the study of extraction methods impact on olive oil final quality. The variety studied is one of the varieties allowed for olive oil with Protected Origin Denomination (DOP production in Alentejo. The Portuguese variety extracted was Galega Vulgar

  18. Viability of autogenous bone grafts obtained by using bone collectors: histological and microbiological study Viabilidade dos enxertos autógenos obtidos com a utilização de coletores para osso: estudo histológico e microbiológico

    Directory of Open Access Journals (Sweden)

    Alberto Blay

    2003-09-01

    54 anos que foram submetidos a tratamento na Disciplina de Periodontia e Implantodontia da Universidade de Santo Amaro. Essas amostras foram fixadas em solução de formol neutro a 10% por 24 horas para serem analisadas histologicamente com o intuito de avaliar a presença de osteoblastos viáveis. Além das amostras fixadas, também foram obtidos espécimens que foram incubados em aerobiose e em anaerobiose, em meio de tioglicolato por 24 h a 36 ± 1°C. A avaliação do crescimento bacteriano foi feita através de seis meios seletivos de cultura (ágar MacConkey, ágar-sangue, ágar manitol, meio Anaerokit LTD, meio Anaerokit LTD - bile e Anaerinsol. Os resultados mostraram que, se forem tomados certos cuidados para prevenir a contaminação com saliva durante o procedimento cirúrgico, este método de coletar osso autógeno pode ser útil em situações em que pequenas quantidades de osso são necessárias.

  19. Whiskers de fibra de sisal obtidos sob diferentes condições de hidrólise ácida: efeito do tempo e da temperatura de extração Whiskers from sisal fibers obtained under different acid hydrolysis conditions: effect of time and temperature of extraction

    Directory of Open Access Journals (Sweden)

    Kelcilene B. R. Teodoro

    2011-01-01

    Full Text Available Neste trabalho, os efeitos de diferentes condições de tempo e temperatura usados para a preparação de whiskers de sisal foram investigados com o objetivo de se determinar a influência destes parâmetros experimentais na morfologia, cristalinidade e estabilidade térmica dos materiais preparados. A obtenção dos whiskers deu-se após o pré-branqueamento da fibra de sisal com solução alcalina de peróxido de hidrogênio. A fibra branqueada foi submetida ao processo de hidrólise com solução de ácido sulfúrico 60% (m/m sob três diferentes condições de temperatura e tempos de extração: 45 °C e 60 minutos (WS45_60; 45 °C e 75 minutos (WS45_75 e 60 °C e 30 minutos (WS60_30. Os whiskers foram caracterizados quanto à morfologia por microscopia eletrônica de transmissão (MET, quanto à cristalinidade (DRX, carga superficial (potencial zeta , teor de enxofre (análise elementar e quanto à estabilidade térmica por termogravimetria (TGA. Os resultados mostraram que os whiskers de sisal apresentaram comprimento e diâmetro médios e 210 nm e 5 nm respectivamente. Devido à alta aglomeração dos whiskers, diferenças relativas às características dimensionais não puderam ser determinadas. Os resultados obtidos revelaram uma forte dependência da cristalinidade final dos whiskers com a temperatura e tempo de extração. O uso de temperatura mais alta (60 °C associado a um menor tempo de extração (30 minutos resulta em whiskers com boa estabilidade térmica (235 °C, maior cristalinidade e sem o comprometimento da estrutura cristalina da celulose.In this work, the effects of different conditions of time and temperature, used for the preparation of whiskers from sisal, were investigated to determine the influence of experimental parameters on morphology, crystallinity and thermal stability of materials prepared. The whiskers were obtained after the bleaching of sisal raw fiber with a solution of hydrogen peroxide alkaline. The

  20. Confiabilidade dos dados antropométricos obtidos em crianças atendidas na Rede Básica de Saúde de Alagoas Reliability of anthropometric data obtained in children seen at the Primary Public Healthcare Service Network in Alagoas, Brazil

    Directory of Open Access Journals (Sweden)

    Maria Amália de Alencar Lima

    2010-03-01

    Full Text Available INTRODUÇÃO: O monitoramento do crescimento infantil constitui-se em importante ferramenta para a construção de indicadores úteis ao planejamento de políticas e ações de atenção à saúde da criança. Para isso é necessário que os dados antropométricos obtidos apresentem satisfatória confiabilidade. OBJETIVO: Investigar a confiabilidade dos dados antropométricos produzidos nos Estabelecimentos de Assistência à Saúde (EAS do SUS em Alagoas. MÉTODOS: Para composição da amostra, sortearam-se 20 dentre os 102 municípios do Estado. Em seguida, dois EAS por município e, nestes, cerca de dez crianças menores de cinco anos. A amostra foi constituída de 40 EAS e 347 crianças. As medidas antropométricas (peso e estatura foram aferidas (1 na rotina do serviço (S; (2 pelo pesquisador utilizando equipamento padrão (P e; (3 pesquisador usando equipamentos do serviço (PS. RESULTADOS: A aplicação do teste Kappa indicou concordância "substancial" (K = 0,69 nas classificações de peso-para-idade (PI entre S e P e "quase perfeita" (K = 0,83 entre PS e P. Quanto à altura-para-idade (AI, a concordância entre S e P foi "discreta" (K = 0,27, passando a "moderada" (K = 0,56 entre PS e P. O Erro Técnico da Medição segundo faixas etárias ( 24 meses indicou problemas na técnica e nos equipamentos. As medidas de peso corporal obtidas em S foram sistematicamente superestimadas (p INTRODUCTION: Monitoring child growth is a very important tool not only to build useful indicators for the evaluation and planning of public policies, but also for appropriate care to child health. In order to accomplish that anthropometric data from services need to present satisfactory reliability. OBJECTIVE: To investigate the reliability of weight and height variables obtained from children at public healthcare services (PHS of Alagoas. METHODS: To build the sample, 20 municipalities were drawn among the 102 of the state. Then, two PHS were drawn per

  1. Desenvolvimento de bebida láctea sabor morango utilizando diferentes níveis de iogurte e soro lácteo obtidos com leite de búfala Development of strawberry-flavored milk drink using different yoghurt levels and whey obtained from buffalo's milk

    Directory of Open Access Journals (Sweden)

    Luciana Albuquerque Caldeira

    2010-10-01

    Full Text Available Este trabalho foi realizado com o objetivo de avaliar as características físico-químicas, sensoriais e microbiológicas de bebidas lácteas elaboradas com leite de búfala e diferentes níveis de iogurte e soro lácteo. Foram desenvolvidas cinco formulações à base de leite de búfala, soro de queijo tipo frescal e iogurte. Os tratamentos foram: T1=10% leite, 10% soro e 80% iogurte; T2=10% leite, 20% soro e 70% iogurte; T3=10% leite, 30% soro e 60% iogurte; T4=10% leite, 40% soro e 50% iogurte; e T5=10% leite, 50% soro e 40% iogurte. Para o leite e soro, foram determinadas acidez titulável (°D, densidade a 15°C, gordura, EST e ESD. As bebidas lácteas foram avaliadas quanto aos parâmetros: pH, acidez titulável, gordura, proteína, viscosidade, cor (CIEL*a*b*, teste de aceitação sensorial com escala hedônica de cinco pontos, ordenação da preferência, enumeração de coliformes a 35 e 45°C e contagem de microrganismos mesófilos aeróbios. Os resultados obtidos, submetidos ao teste de ANOVA e teste de médias com nível de significância a 5%, revelaram que os níveis de soro influenciaram os valores de pH, acidez, gordura, proteína, viscosidade e L* das bebidas lácteas, enquanto as coordenadas de cromaticidade a* e b* não sofreram influência. As formulações com 10 e 20% de soro foram as mais aceitas no teste de aceitação sensorial, bem como na preferência pelos julgadores.This research was carried out to evaluate the physical-chemical, microbiological and sensorial characteristics of dairy beverages elaborated with buffalo milk and different levels of yoghurt and whey. Five formulations were developed based on buffalo's milk, cheese whey and yogurt. The treatments were: T1=10% milk, 10% whey and 80% yoghurt; T2=10% milk, 20% whey and 70% yoghurt; T3=10% milk, 30% whey and 60% yoghurt; T4=10% milk, 40% whey and 50% yoghurt; T5=10% milk, 50% whey and 40% yoghurt. It was determined the acidity (°D, density at 15°C, fat

  2. Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet Caracterização físico-química e microbiológica de surimi obtido de resíduos da filetagem de piramutaba

    Directory of Open Access Journals (Sweden)

    Giane Célia dos Santos Galvão

    2012-06-01

    Full Text Available The aim of this work was to perform the microbiological and physicochemical characterization of surimi made from waste of piramutaba filleting. The results of physicochemical characterization of the waste and surimi were: moisture (76.37 and 79.11%, total lipids (5.35 and 0.74%, proteins (14.92 and 10.79%, ash (3.03 and 2.35%, pH (6.9 and 7.4, caloric value (109.15 and 77.86 kcal.g-1, and water activity (both 0.98, respectively. The results of the levels of total volatile bases were 7.29 mgN/100-1 g (waste and 7.01% carbohydrate (surimi. The values of total lipids and proteins were reduced during the preparation of surimi, probably due to successive washes during the processing. Waste and surimi were examined microbiologically and are in compliance with required parameters. The results show a loss of red (a* parameter and yellow (b* parameter color. On the other hand, the L* parameter (lightness increased after the processing of surimi. It can be concluded that piramutaba waste can be used for surimi preparation and as a source of nutrients for human consumption, providing an alternative use of these wastes avoiding their disposal polluting the environment.O objetivo deste trabalho foi realizar a caracterização físico-química e microbiológica do surimi obtido de resíduos da filetagem de piramutaba. Os resultados da caracterização físico-química dos resíduos e surimi foram: umidade (76,37 e 79,11%, lipídios totais (5,35 e 0,74%, proteínas (14,92 e 10,79%, cinzas (3,03 e 2,35%, pH (6,9 e 7,4, valor calórico (109,15 e 77,86 kcal.g-1 e atividade de água (ambos 0,98, respectivamente. Os resultados dos valores de bases voláteis totais foi de 7,29 mgN/100-1 g (resíduos e carboidratos de 7,01% (surimi. Os valores de lipídios totais e proteínas foram reduzidos durante o preparo do surimi, provavelmente, devido a sucessivas lavagens durante o processamento. Os resíduos e o surimi foram analisados microbiologicamente estando em

  3. Variabilidade genética de acessos obtidos de populações cultivadas e silvestres de maracujazeiro-doce com base em marcadores rapd Genetic diversity obtained from cultivated population and native accesses of seewt passion fruit based on rapd markers

    Directory of Open Access Journals (Sweden)

    Graciele Bellon

    2009-03-01

    Full Text Available O maracujazeiro-doce (Passiflora alata Curtis, devido a preços diferenciados, vem ganhando importância dentro do mercado de frutas in natura. O melhoramento genético é fundamental para elevar a qualidade e a produtividade da cultura. Os marcadores moleculares do DNA têm sido muito úteis por permitirem a obtenção de um número praticamente ilimitado de polimorfismo genético sem influência do ambiente. Objetivou-se, neste trabalho, estudar a variabilidade genética de 17 acessos de maracujá-doce, com base em marcadores moleculares RAPD. Um acesso de P. quadrangularis e um de P. edulis foram utilizados como outgroups. Amostras de DNA genômico de cada acesso foram extraídas e 11 iniciadores decâmeros (OPD 04; 07; 08 e16; OPE 18 e 20; OPF 01 e 14; OPG 08; OPH 12 e 16 foram utilizados para a obtenção dos marcadores. Os marcadores obtidos foram convertidos em uma matriz de dados binários, a partir da qual foram estimadas as distâncias genéticas entre os acessos e realizadas análises de agrupamento e de dispersão gráfica. Do total de marcadores, considerando-se apenas os acessos de P. alata, observaram-se 87 (62,12% bandas polimórficas, evidenciando a grande variabilidade intraespecífica. A análise de agrupamento realizada com base nas distâncias genéticas permitiu subdividir os 17 acessos de P. alata em, pelo menos, cinco grupos de similaridade genética. Os acessos silvestres foram os que mais contribuíram para a ampliação da base genética dos materiais estudados, abrindo perspectivas para o uso desses materiais em programas de melhoramento.Sweet passion fruit (Passiflora alata Curtis is gaining importance in the in natura fruit market due to differential value. Genetic breeding is crucial to improve crop quality and productivity. Molecular markers of DNA have been very useful by allowing obtaining a virtually unlimited number of genetic polymorphism without environment influence. This work's objective was to study the

  4. Análise invasiva e não invasiva do fuso meiótico de oócitos humanos obtidos de ciclos estimulados: dados preliminares Invasive and noninvasive analysis of the meiotic spindle of human oocytes obtained from stimulate cycles: preliminary results

    Directory of Open Access Journals (Sweden)

    Luciana Azôr Dib

    2012-11-01

    Full Text Available OBJETIVOS: Avaliar a concordância entre as técnicas de microscopia de polarização e microscopia confocal na avaliação do fuso meiótico de oócitos humanos maturados in vivo. MÉTODOS: Estudo prospectivo que avaliou oócitos com o primeiro corpúsculo polar extruído obtidos de mulheres inférteis submetidas à estimulação ovariana para realização de injeção intracitoplasmática de espermatozoide. Os oócitos com o primeiro corpúsculo polar extruído foram avaliados por meio da microscopia de polarização e, imediatamente após, foram fixados e corados para avaliação dos microtúbulos e cromatina pela microscopia confocal de alto desempenho. Foram comparadas as técnicas de microscopia de polarização e confocal, de acordo com a visualização ou não do fuso meiótico pela microscopia de polarização e a presença ou não de anomalias meióticas à análise pela microscopia confocal. Foram calculados os intervalos de confiança, o índice de Kappa e a concordância entre as metodologias, considerando a análise da microscopia de imunofluorescência como padrão-ouro para avaliação de normalidade do fuso e distribuição cromossômica oocitária. RESULTADOS: Observou-se que 72,7% dos oócitos em metáfase II com fuso celular não visível à polarização apresentaram anormalidades meióticas à análise confocal e que 55,6% dos oócitos em metáfase II com fuso celular visível à polarização apresentaram-se como oócitos anormais à análise confocal. Somente 44,4% dos oócitos com fuso celular visível à polarização apresentaram-se como normais à análise confocal. A concordância entre os métodos foi de 51,1% (Kappa: 0,11; IC95% -0,0958 - 0,319. CONCLUSÕES: A baixa concordância entre a microscopia de polarização e a confocal na avaliação do fuso meiótico oocitário sugere que a visualização do fuso meiótico de oócitos humanos em metáfase II pela microscopia de polarização tem limitado o valor

  5. Produção de Bipolaris euphorbiae em meios de cultura sólidos e líquidos obtidos de grãos e resíduos agroindustriais Production of Bipolaris euphorbiae in solid and liquid culture media obtained from grains and agricultural industry residues

    Directory of Open Access Journals (Sweden)

    Mara Cristina Penariol

    2008-12-01

    Full Text Available A introdução de Bipolaris euphorbiae como bioagente de controle de Euphorbia heterophylla é dependente da produção de conídios em grande quantidade. No presente trabalho, objetivou-se definir meios de cultura sólidos e líquidos, obtidos de grãos ou resíduos da agroindústria, eficazes para a produção de conídios de B. euphorbiae. No preparo dos meios sólidos utilizaram-se grãos de arroz, trigo e sorgo, quirelas de arroz, milho e trigo, sorgo moído, farelos de arroz, trigo e soja, cascas de mandioca e soja, casca de mandioca + farelo de soja, bagaço de cana e bagaço de cana + amido solúvel. No preparo dos meios líquidos, utilizaram-se grãos de arroz, sorgo e trigo, quirela de milho, farelos de trigo, soja e arroz, casca de mandioca e soja, vinhaça de cana e água de prensa da mandioca. Avaliaram-se a produção e a viabilidade dos conídios e a virulência do fungo e, nos meios líquidos, também a biomassa. A produção de conídios é influenciada pelo tipo de meio de cultura, sendo acentuadamente maior nos meios sólidos, destacando-se, como substratos, o sorgo em grão (474 x 10(6 conídios g-1 e a casca de soja (472 x 10(6 conídios g-1. Dentre os meios líquidos obteve-se mais produção usando-se farelo de trigo (1,33 x 10(6 conídios mL-1. A virulência e a viabilidade de B. euphorbiae não são afetadas pelo preparo de meios sólidos ou líquidos e pela composição nutricional dos meios de cultura. Na maioria dos meios sólidos ou líquidos obteve-se viabilidade de conídios maior que 98%; apenas os conídios produzidos nos meios sólidos de quirela de arroz, casca de mandioca + farelo de soja e farelo de soja estavam com viabilidade significativamente menor.The introduction of Bipolaris euphorbiae as a bioagent for Euphorbia heterophylla control depends on fungal conidia production in large amount. This work evaluate to solid and liquid culture media obtained from grains and residues from agriculture industries

  6. Tritiated Thymidine as Tracer in DNA Metabolism and Cell Dynamics of Experimental Myeloid Leukaemia; Emploi de la Thymidine Tritiee comme Indicateur pour l'Etude du Metabolisme de l'ADN et de la Dynamique des Cellules dans la Leucemie Myeloide Experimentale; 0422 0440 0438 0442 0414 ; Empleo de la Timidina Tritiada como Indicador para Estudiar el Metabolismo del Acido Desoxirribonucleico y la Dinamica Celular en la Leucemia Mieloide Experimental

    Energy Technology Data Exchange (ETDEWEB)

    Zajicek, G.; Rosin, A.; Gross, J. [Department of Experimental Medicine and Cancer Research, Hebrew University, Hadassah Medical School, Jerusalem (Israel)

    1962-02-15

    disposent probablement pas d'une quantite suffisante de thymidine dans le liquide ascitique. Les auteurs etudient la dichotomie entre la synthese du complement entier de l'ADN et la division subsequente de la cellule. (author) [Spanish] El tritio se utiliza en Israel como indicador para estudiar una gran variedad de problemas biologicos. Los autores describen en particular los resultados de unas investigaciones en que se ha utilizado timidina tritiada para estudiar la dinamica celular en la leucemia mieloide, inducida con lines experimentales, y analizar el mecanismo de la incorporacion de esa sustancia en el acido desoxirribonucleico de celulas leucemicas y de celulas de tumores asciticos de Ehrlich. Las celulas leucemicas se marcaron in vivo inyectando en la vena yugular de ratas timidina tritiada a razon de 1 {mu}curie/g de peso corporal. Se evaluo la velocidad de aparicion de las celulas marcadas en la sangre de la periferia y en el tumor ascitico de los animales. En otros experimentos se determino la velocidad de dilucion del indicador en los nucleos, lo que permitio calcular el tiempo de duplicacion de la poblacion de mielocitos. La dinamica de las celulas transfundidas se investigo inyectando mielocitos marcados en la vena yugular de ratas normales y leucemicas. Se midio su velocidad de desaparicion de la sangre. Se examinaron varios organos para ver si contenian celulas marcadas y se observo que poco despues de la inyeccion las celulas son principalmente captadas por los pulmones, despues por el bazo y, en menor grado, por el higado. Pasadas 24 h no se pudieron detectar celulas marcadas en ningun organo. De este modo, se obtuvo informacion sobre el comportamiento de los mielocitos leucemicos en distintos organos de animales normales y leucemicos. En experimentos realizados in vitro, se anadio a una suspension celular timidina tritiada en una concentracion de 1 {mu}curie/ml. Durante la marcacion in vitro se comprobo que el numero de celulas marcadas es 40 veces mayor

  7. Mensuração de pressão venosa central por meio de cateteres venosos central e periférico: comparação entre os valores obtidos em cães e elaboração de índice de correção Measurement of central venous Pressure by mean of central and peripheric catheters: comparison among the obtained vallues in dogs and elaboration of a correction index

    Directory of Open Access Journals (Sweden)

    Eduardo Santiago Ventura de Aguiar

    2004-12-01

    Full Text Available A Pressão Venosa Central (PVC é a pressão de retorno do sangue ao lado direito do coração e é um importante parâmetro a ser aferido em numerosas situações clínicas, cirúrgicas e experimentais. Para sua realização, utiliza-se um Cateter Venoso Central (CVC aplicado na veia jugular. Em virtude de este ser um aparato intravenoso de alto custo, optou-se por testar a validade de se aferir a PVC com um Cateter Venoso Periférico (CVP aplicado à mesma veia, o qual apresenta custo reduzido. Como resultado, a medida da PVC, tomada com o CVC, deve sofrer um índice de redução, chegando-se, assim, ao valor da PVC que seria obtido com o uso do CVC. Os resultados deste estudo permitem concluir que o CVP é apropriado para a aferição da PVC em cães.The Central Venous Pressure (CVP is a very important pattern for monitorization in many clinical, surgical and experimental procedures, and it reflects the blood pressure that returns to the right heart side. For its measurement a Central Venous Catheter (CVC must be used inside the jugular vein. Because of the high cost of the CVC, an option was taken to measure the CVP with a Peripheric Venous Catheter (PVC inside the jugular vein, with low cost. The CVP measure obtained with the PVC must be subtracted to a reduction index, in this way the measure would correspond to the ones done with the CVC. This study alouds to conclude that the PVC is adequate for CVP measurement in dogs.

  8. Determinazione di ossidi di colesterolo in alici (Engraulis encrasicolus) trattate con una miscela commerciale di acido citrico, acido trisodico e perossido D'idrogeno

    OpenAIRE

    Raffaele, Marrone; Giorgio, Smaldone; Giuseppe, Palma; Raffaele, Romano; Domenico, Bortone; Aniello, Anastasio

    2012-01-01

    A new additive formulation containing hydrogen peroxide, citric acid and trisodium acid is illegally used in fishery products due its whitening and antioxidant features. Aim of this study was to evaluate the possible presence of COPs and their role as markers of illegal treatment in anchovies (Engraulis encrasicolus) stored at different temperatures. Sensory analysis was also performed by the specific QIM test. The quantitative determinations (%) of cholesterol oxides (COPs) showed changing a...

  9. Método de Cobb na escoliose idiopática do adolescente: avaliação dos ângulos obtidos com goniômetros articulados e fixos Método de Cobb en la escoliosis idiopática del adolescente: evaluación de los ángulos obtenidos con goniómetros articulados y fijos Cobb method in adolescent idiopathic scoliosis-angle: evaluation with articulated and fixed goniometers

    Directory of Open Access Journals (Sweden)

    Ana Laura Loyola Munhoz da Cunha

    2009-06-01

    Full Text Available OBJETIVO: determinar a variação do ângulo de Cobb na escoliose idiopática do adolescente por meio da utilização de dois tipos de goniômetro calibrados: articulado e fixo. MÉTODOS: oito radiografias de pacientes com escoliose idiopática do adolescente, obtidas em aparelho digital, com curva primária grave (acima de 30º foram selecionadas. As imagens de cada uma das oito radiografias das escolioses foram processadas e impressas 36 vezes em película radiográfica (totalizando 228 imagens. As curvas escolióticas tanto primárias como secundárias (17 curvas tiveram suas vértebras-limite pré-determinadas e foram medidas, por seis ortopedistas, atuantes na área de cirurgia da coluna vertebral. Cada examinador recebeu alternadamente um conjunto das 8 escolioses/17 curvas a serem medidas com um goniômetro ora articulado e ora fixo sempre acompanhado de um lápis apropriado para medir radiografias. Os seis ortopedistas mediram cada uma das 17 curvas em seis ocasiões diferentes, sendo que três delas com o goniômetro articulado e três com o goniômetro fixo. O intervalo entre a entrega de cada conjunto não foi inferior a 24 horas. A análise estatística foi feita por meio de testes pareados, para a avaliação da variação entre os diferentes goniômetros pelos mesmos indivíduos, e de comparações por porcentagem, média, coeficientes e índices de variação obtidos, para as demais variáveis estudadas (variação intra e interobservadores. RESULTADOS: entre as 17 curvas avaliadas (A a Q, apenas a curva M mostrou diferenças estatisticamente significativas entre os valores angulares obtidos com o goniômetro articulado (média de 33,3+9,1º e com o goniômetro fixo (27,9+4,2º, em que p=0,009. CONCLUSÃO: não foram encontradas diferenças significativas entre os valores obtidos com o goniômetro articulado e com o goniômetro fixo em 16 das 17 curvas avaliadas na presente amostra. As diferenças observadas entre os goni

  10. Relação entre índice de resistência obtido pela ultra-sonografia Doppler transfortanela e o neurodesenvolvimento até o primeiro ano de vida em recém-nascidos a termo com encefalopatia hipóxico-isquêmica leve e moderada Relation between the resistance index obtained by the transfontanellar Doppler ultrasonography and the neurological development until the first year of life in term infants with mild or moderate hypoxic-ischaemic encephalopathy

    Directory of Open Access Journals (Sweden)

    Maria Helena Martins Garcia

    2007-12-01

    Full Text Available OBJETIVO: Avaliar a relação do índice de resistência (IR obtido pela ultra-sonografia Doppler transfontanela com o neurodesenvolvimento até um ano de idade, em recém-nascidos (RN a termo com encefalopatia hipóxica-isquêmica (EHI leve a moderada, secundária à asfixia intra-parto. MÉTODO: Estudo prospectivo em 20 RN com EHI leve a moderada, IR elevado no primeiro exame de Doppler, e sem doenças associadas ou anormalidades morfológicas cerebrais. Foram realizados exames seriados bimensais de Doppler transfontanela a partir do sétimo dia de vida, e avaliações clínicas mensais do neurodesenvolvimento no primeiro ano de vida. RESULTADOS: Houve normalização progressiva dos valores de IR até o último exame realizado. Cinco pacientes apresentaram normalização clínico-neurológica no período neonatal, após o primeiro exame de Doppler. Quinze lactentes apresentaram alterações neurológicas com resolução a partir do segundo trimestre de vida. CONCLUSÃO: Houve relação entre os períodos em que ocorreu a normalização dos valores de IR e a melhora clínica-neurológica.OBJECTIVE: To evaluate the relation between the resistance index (RI obtained by transfontanellar Doppler ultrasonography, and the neurodevelopment until one year of life, at term newborns with mild or moderate hypoxic-ischaemic encephalopathy due to intrapartum asphyxia. METHOD: 20 term newborns, with mild or moderate hypoxic-ischemic encephalopathy, high values of resistance index in the first exam, and without cerebral morfologic abnormalities or other diseases. They were submitted to serial bimonthly transfontanellar Doppler ultrasonography, from the seventh day of life on, and monthly clinical neurodevelopment assessment until one year of life. RESULTS: There was a progressive normalization of RI values until the last examination. In five cases there were clinical neurologic normalization in the neonatal period after the first Doppler exam. Fifteen infants

  11. Avaliação da microestrutura e propriedades mecânicas de metais de solda obtidos por processos de soldagem manual e automatizado utilizado na soldagem de aço API 5L X80 Evaluation of microstructure and mechanical properties of weld metals obtained by manual and automated welding process used in the welding of API 5L X80 steel

    Directory of Open Access Journals (Sweden)

    Siderley Fernandes Albuquerque

    2011-12-01

    Full Text Available O objetivo do trabalho foi avaliar as características da zona termicamente afetada (ZTA e a microestrutura e propriedades mecânicas de metais de solda de juntas soldadas do aço API 5L X80, obtidos para quatro diferentes procedimentos de soldagem utilizando processos manuais e automatizados. Para isto, chapas do referido aço foram soldadas por processo manual ao Arco Elétrico com Eletrodo Revestido (SMAW, utilizando 473 e 673 K como temperaturas de interpasses e o eletrodo celulósico AWS E8010-G como consumível; por processo ao Arco Elétrico com Arame Tubular (FCAW robotizado, utilizando o arame AWS E71T- 1C como metal de adição e argônio com 25%CO2 como gás de proteção; por processo a Arco Elétrico com Eletrodo de Tungstênio (GTAW mecanizado na raiz da solda, usando o arame ER70S-3 e argônio como gás de proteção. As análises microestruturais foram relacionadas com os resultados de ensaios de impacto Charpy nos metais de solda e com os perfis de microdureza Vickers ao longo da junta soldada. Os resultados indicaram maiores percentuais de Ferrita Acicular e maiores valores de resistência ao impacto nos metais de solda e uma menor extensão e granulometria da ZTA, associado ao procedimento de soldagem utilizando processo automatizado com maior velocidade de soldagem.The objective of this work was to evaluate the heat affected zone characteristics and weld metals microstructure and mechanical properties of API 5L X80 steel welded joints, obtained for four different welding procedures using manual and automated processes. For this, plates of this steel were welded by manual Shielded Metal Arc Welding (SMAW process with interpasses temperatures of 473 e 673 K, and using AWS E8010-G electrode as filler metals; robotized Flux Cored Arc Welding (FCAW process, using AWS E71T-1C wire and Ar25%CO2 as consumable and mechanized Gas Tungsten Arc Welding (GTAW process, for the root pass using AWS ER70S-3 and Ar as consumable .The

  12. Avaliação das propriedades do Ba0,50Sr0,50Co0,80Fe0,20O3-d para células a combustível de óxido sólido de temperatura intermediária obtido pelo método citratos-EDTA Evaluation of the properties of Ba0,50Sr0.50Co0.80Fe0.20O3-d obtained by the citrate-EDTA method for intermediate temperature solid oxide fuel cell

    Directory of Open Access Journals (Sweden)

    E. Bonturim

    2013-03-01

    Full Text Available Ba0,50Sr0,50Co0,80Fe0,20O3-d (BSCF apresenta propriedades físicas, químicas e microestruturais adequadas para compor o cátodo de uma célula a combustível de óxido sólido de temperatura intermediária (ITSOFC. Este trabalho tem por objetivo a síntese e a caracterização do BSCF obtido pelo método dos citrados-EDTA. Os resultados obtidos por difração de raios X (DRX indicaram fases secundárias para o material calcinado a 700 e 800 ºC e fase única com estrutura cristalina do tipo perovskita para 900 ºC. As micrografias obtidas por microscopia eletrônica de varredura dos particulados evidenciou a formação de aglomerados de tamanho Ba0.50Sr0.50Co0.80Fe0.20O3-d (BSCF presents physical, chemical and microstructural properties suitable to form the cathode of Intermediate Temperature Solid Oxide Fuel Cell (ITSOFC. This work aims the synthesis and characterization of BSCF, obtained by the citrate-EDTA method. The X-ray diffraction results indicate secondary phases for the material calcined at 700 and 800 °C and single phase with perovskite crystalline structure at 900 °C. The SEM-FEG particles micrographs show the formation of < 20 µm clusters. The dilatometric analysis of pellets indicates the sintering temperature at ~ 1050 °C. XRD results of the sintered samples show perovskite single phase. The SEM micrographs confirmed the formation of higher porosity in the samples sintered at 1000 °C/1 h using powders calcined at 900 °C.

  13. OPTIMIZACIÓN DEL RENDIMIENTO Y CONTENIDO DE TIMOL DE ACEITE ESENCIAL DE ORÉGANO SILVESTRE OBTENIDO POR ARRASTRE CON VAPOR OPTIMIZAÇÃO DO RENDIMENTO E CONTEÚDO DE TIMOL DO ÓLEO ESSENCIAL DO ORÉGANO SELVAGEM OBTIDO POR ARRASTRE À VAPOR OPTIMIZATION OF YIELD AND THYMOL CONTENT OF WILD OREGANO ESSENTIAL OIL OBTAINED BY STEAM DISTILLATION PROCESS

    Directory of Open Access Journals (Sweden)

    OSCAR ARANGO B

    2012-12-01

    Full Text Available Se estudió el proceso de extracción por arrastre con vapor a escala de planta piloto del aceite esencial de orégano silvestre (Lippia origanoides H.B.K de la región del Alto Patía (Colombia utilizando la metodología de superficie de respuesta. Los factores estudiados fueron el tiempo de extracción (1-3 horas, la densidad del lecho (60-100 g/L y la presión de extracción (1-3 psi. Las variables de respuesta fueron el rendimiento de extracción y el contenido de timol del aceite esencial. La composición de los aceites esenciales fue determinada mediante cromatografía de gases. Con respecto al rendimiento se obtuvo que solamente la densidad del lecho presentó un efecto estadísticamente significativo (PO processo de extração do óleo essencial de orégano silvestre (Lippia origanoides H.B.K por arraste a vapor foi estudado a escala piloto na região do Alto Patía (Colômbia, utilizando a metodologia de superfície resposta. Os fatores estudados foram o tempo de extração (1-3 horas, a densidade do leito (60-100 g/L e a pressão de extração (1-3 psi. As variáveis de resposta foram: o rendimento da extração e o conteúdo de timol do óleo essencial. A composição dos óleos essenciais foi determinada mediante cromatografia de gases. Com respeito ao rendimento, foi obtido que somente a densidade do leito apresentou um efeito estatisticamente significativo (PThe extraction process by steam distillation on pilot plant of essential oil from wild oregano (Lippia origanoides H.B.K from Alto Patía region (Colombia was studied using surface response methodology. Factors studied were the extraction time (1-3 hours, the density of the bed (60-100 g/L and the extraction pressure (1-3 psi. The response variables were the extraction yield and the content of thymol in the essential oil. The composition of essential oils was determined by gas chromatography. Regarding yield only the bed density presented a statistically significant effect (P

  14. Terpenes and fatty acids from Dipteryx lacunifera Ducke; Terpenos e acidos graxos de Dipteryx lacunifera Ducke

    Energy Technology Data Exchange (ETDEWEB)

    Vieira Junior, Gerardo Magela; Silva, Hilris Rocha e; Bittencourt, Thais Chaves; Chaves, Mariana H. [Universidade Federal do Piaui (UFPI), Teresina (Brazil). Dept. de Quimica]. E-mail: mariana@ufpi.br; Simone, Carlos Alberto de [Universidade Federal do Alagoas (UFAL), Maceio, AL (Brazil). Inst. de Quimica e Biotecnologia

    2007-07-01

    This paper describes the isolation of the furanocassane-type diterpene, named vinhaticoic acid, along with b-farnesene and spatulenol from fruit shells of D. lacunifera. Structural determinations were accomplished by chemical derivatization and spectral analysis, including 1D and 2D NMR and X-ray crystallography. The fatty portion was extracted from the fruit kernels, transesterfied and analysed by HRGC/MS. Oleic acid (75.8 +- 4.3%) was the major component. Essential oil extracted from the fruit shells of D. lacunifera was analysed by HRGC/MS and nine sesquiterpenes were identified; beta-farnesene (48.6%) and spatulenol (21.61%) were the major constituents. (author)

  15. Vitamina B12, Acido Fólico y Función Mental en Adultos Mayores

    OpenAIRE

    Meertens-R, Lesbia; Solano-R, Liseti

    2005-01-01

    Los adultos mayores constituyen un grupo de población vulnerable a cuadros de deficiencias de nutrientes específicos como la vitamina B12 y el ácido fólico, íntimamente ligados al deterioro de las funciones mentales, en especial, del área cognitiva. El objetivo de este estudio fue determinar indicadores del estado de vitamina B12 y ácido fólico y asociarlos a la evaluación de la función mental de 53 adultos mayores de 60 años de edad, residenciados en un hogar geriátrico. Se evaluó consumo di...

  16. Equilibrio de fases de sistemas compostos por oleos vegetais, acidos graxos e etanol hidratado.

    OpenAIRE

    Cintia Bernardo Gonçalves

    2004-01-01

    Resumo: Este trabalho de tese de doutoramento teve como objetivo avaliar vários aspectos do processo de extração líquido-líquido (ELL) como uma rota alternativa para a desacidificação de óleos vegetais. O conhecimento do equilíbrio de fases do sistema de interesse é essencial para o bom planejamento e desenvolvimento do processo de ELL. O presente trabalho apresenta dados de equilíbrio para sistemas compostos por óleos vegetais (milho/palma), ácidos graxos (oléico/ palmítico) e solvente (etan...

  17. Acid Deposition Maps in Spain; Mapas de Deposito Acido en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Artinano, B; Cabal, H; Garcia, C

    1998-07-01

    Animal and monthly deposition velocity and total sulfur deposition maps have been performed for the peninsular Spain for 1992 by using the inferential method. To do this, updated databases with high space and time resolution, for land uses (CORINE) and meteorological information from analysis modelling for the same year, have been utilized. The final result are deposition maps in a 5x5 Km{sup 2} grid which allow to assess the methodology used in Europe to obtain the maps of excedances over the critical loads of pollutants. (Author) 32 refs.

  18. ELIMINACION DEL COLORANTE NEGRO ACIDO 194 DESDE AGUAS RESIDUALES TEXTILES MEDIANTE ELECTROCOAGULACION

    OpenAIRE

    VIDAL FUENTES, JORGE ARTURO

    2013-01-01

    Diariamente, las industrias textiles descargan grandes volúmenes de aguas que contienen altas concentraciones de colorantes y aditivos, los cuales ocasionan daños considerables al medio ambiente. Muchos de estos colorantes son estables a la luz y a la biodegradación, siendo considerados como compuestos orgánicos persistentes (COPs). Es por esto que es necesario aplicar métodos que permitan la eliminación de estos contaminantes desde las aguas. Una metodología efectiva para la eliminación de C...

  19. Changing electrolyte and acido-basic profile in HIV-infected patients in the HAART era.

    Science.gov (United States)

    Isnard Bagnis, Corinne; Du Montcel, Sophie Tezenas; Fonfrede, Michele; Jaudon, Marie Chantal; Thibault, Vincent; Carcelain, Guislaine; Valantin, Marc Antoine; Izzedine, Hassan; Servais, Aude; Katlama, Christine; Deray, Gilbert

    2006-01-01

    HIV-infected patients may develop a variety of underreported metabolic abnormalities that may be classified into HIVAN, specific HIV abnormalities, coincidental renal disorders and anti-retroviral-treatment-induced side effects. Our descriptive cross-sectional study evaluates the prevalence of electrolyte and acid base disorders in HIV patients in the HAART era in a tertiary care teaching hospital. All consecutive HIV-infected patients (n = 1,232) presenting at our Department of Infectious Disease over 3 months were included. All available biochemical data obtained at admission or on the day of the visit were analyzed. We identified risk factors for electrolyte and acid base disorders with univariate regression analysis and multivariate stepwise regression analysis. Variables tested for significance included age, sex, absolute CD4 and CD8 counts, hepatitis B and C antibodies, and use and type of anti-retroviral medication. Most frequent and clinically relevant abnormalities were hyperuricemia in 41.3%, hypophosphatemia in 17.2% and low bicarbonate level in 13.6% of HIV-tested patients. Plasma magnesium was out of the normal range in 38.9% and blood glucose in 25.3% of the tested patients. When CD4 count was below 200/mm3, 9.2% of tested patients experienced low serum calcium (vs. 0.5% if CD4 count >200/mm3, p 200/mm3, p 200/mm3, p < 0.0001). Protease inhibitor treatment was a significant risk factor of hyperuricemia (p < 0.003). Non-nucleoside reverse transcriptase inhibitor therapy was significantly associated with less hyperuricemia (OR = 0.6, 95% CI 0.38-0.96) and with hypophosphatemia (OR = 2.0, 95% CI 1.1-3.4). The profile of biochemical abnormalities in HIV-infected patients has changed, hyperuricemia and hypophosphatemia being the most prevalent. Causes are poorly understood. Interpretation of drug-induced side effects in the HIV patient is only meaningful if performed versus a control group of patients. Copyright 2006 S. Karger AG, Basel

  20. Cementation of wastes with boric acid; Cimentacao de rejeitos contendo acido borico

    Energy Technology Data Exchange (ETDEWEB)

    Tello, Cledola C.O.; Haucz, Maria Judite A. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil); Alves, Lilian J.L.; Oliveira, Arno H. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear

    2000-07-01

    In nuclear power plants (PWR) are generated wastes, such as concentrate, which comes from the evaporation of liquid radioactive wastes, and spent resins. Both have boron in their composition. The cementation process is one of the options to solidify these wastes, but the boron has a negative effect on the setting of the cement mixture. In this paper are presented the experiments that are being carried out in order to overcome this problem and also to improve the efficiency of the process. Simulated wastes were cemented using additives (clays, admixtures etc.). In the process and product is being evaluated the effect of the amount, type and addition order of the materials. The mixtures were selected in accordance with their workability and incorporated waste. The solidified products are monolithic without free water with a good mechanical resistance. (author)

  1. Extração de acido carminico e analise por cromatografia liquida de alta eficiencia

    OpenAIRE

    Paulo Roberto Nogueira Carvalho

    1996-01-01

    Resumo: A preocupação dos consumidores com o uso de substâncias artificiais em alimentos tem aumentado muito nos últimos anos e feito com que os fabricantes procurem substitutos para os corantes artificiais ainda utilizados. O carmim de cochonilha, nome dado ao complexo de alumínio e cálcio do ácido carmínico (ácido 7- b - D - glicopiranosil - 9, 10 - diidro - 3, 5, 6, 8 - tetraidroxil - 1 - metil - 9, 10 - dioxo - 2 - antracenocarboxílico), extraído das fêmeas da cochonilha (Dactylopius cocc...

  2. Acidos grasos omega-3 en la nutrición ¿como aportarlos?

    OpenAIRE

    Valenzuela B, Alfonso; Valenzuela B, Rodrigo

    2014-01-01

    Los beneficios derivados del consumo de ácidos grasos omega-3 EPA y DHA de origen marino están sólidamente documentados, por lo cual existen recomendaciones para su consumo. La recomendación es consumir productos del mar, específicamente pescado. Sin embargo la disponibilidad de este recurso es cada vez menor. Los aceites marinos, ricos en ácidos grasos omega-3 son también cada vez más escasos y de mayor costo. El aceite de pescado, altamente inestable a la oxidación, se puede encapsular, mic...

  3. Acid Deposition Maps in Spain; Mapas de Deposito Acido en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Artinano, B.; Cabal, H.; Garcia, C. [CIEMAT. Madrid (Spain)

    1998-12-31

    Annual and monthly deposition velocity and total sulfur deposition maps have been performed for the peninsular Spain for 1992 by using the inferential method. To de this, updated database with high space and time resolution, for land uses (CORINE) and meteorological information from analysis modelling for the same year, have been utilized. The final result are deposition maps in a 5 x 5 km``2 grid which allow to assess the methodology used in Europe to obtain the maps of excedance over the critical loads of pollutants. (Author) 32 refs.

  4. Naphthenic acid characterization and distribution in crude oils; Caracterizacao e distribuicao de acidos naftenicos em petroleos

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Regina C.L.; Gomes, Alexandre de O. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Naphthenic acid corrosion was observed for the first time during the distillation process of some kind of crude oils in 1920. Recent reports about naphthenic acid corrosion have been found in China, India, Venezuela, Eastern Europe, Russia and the USA. In Brazil, heavy and acid crude oil processing is rising. Some brazilian crude oils have TAN around 3,0 mg KOH/g. The presence of relatively high levels of naphthenic acids in crude oils is a bane of petroleum refiners; and more recently, of producers as well, who have reported problems during production with calcium and sodium naphthenate . Essentially, these acids which are found to greater or lesser extent in virtually all crude oils are corrosive and tend to cause equipment failures, lead to high maintenance costs and may pose environmental disposal problems. In order to give these information to PETROBRAS, The Research and Development Center of PETROBRAS (CENPES) has been working in house and with brazilian universities developing analytical technicians to know better molecular structures and distribution of these acids compounds in crude oils. This work presents the actual methods and some results from these developments. (author)

  5. Prediction of neonatal metaboic acidos in women with a singleton term pregnancy in cephalic presentation

    NARCIS (Netherlands)

    Westerhuis, M.E.M.H.; Schuit, E.; Kwee, A.; Zuithoff, N.P.A.; Groenwold, R.H.H.; Akker, van den E.S.A.; Beek, van E.; Dessel, van H.J.H.M.; Drogtrop, A.P.; Geijn, van H.P.; Graziosi, G.C.M.; Lith, van J.M.M.; Nijhuis, J.G.; Oei, S.G.; Oosterbaan, H.P.; Porath, M.M.; Rijnders, R.J.P.; Schuitemaker, N.W.E.; Wijnberger, L.D.E.; Willekes, C.; Wouters, M.G.A.J.; Visser, G.H.A.; Mol, B.W.J.; Moons, K.G.M.

    2012-01-01

    We sought to predict neonatal metabolic acidosis at birth using antepartum obstetric characteristics (model 1) and additional characteristics available during labor (model 2). In 5667 laboring women from a multicenter randomized trial that had a high-risk singleton pregnancy in cephalic presentation

  6. Quantification of uranyl in presence of citric acid; Cuantificacion de uranilo en presencia de acido citrico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N.; Barrera D, C.E. [UAEM, Facultad de Quimica, 50000 Toluca, Estado de Mexico (Mexico); Ordonez R, E. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: nidgg@yahoo.com.mx

    2007-07-01

    To determine the influence that has the organic matter of the soil on the uranyl sorption on some solids is necessary to have a detection technique and quantification of uranyl that it is reliable and sufficiently quick in the obtaining of results. For that in this work, it intends to carry out the uranyl quantification in presence of citric acid modifying the Fluorescence induced by UV-Vis radiation technique. Since the uranyl ion is very sensitive to the medium that contains it, (speciation, pH, ionic forces, etc.) it was necessary to develop an analysis technique that stands out the fluorescence of uranyl ion avoiding the out one that produce the organic acids. (Author)

  7. Isolation of deoxyribonucleic acids (A Review); Aislamiento de los acidos desoxiribonucleicos. Revision Bibliografica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia de Pineda, M de

    1974-07-01

    The criteria of choice in this Review have been to gather some of the last advances in the methodology of DNAs isolation; also the description of the generally accepted procedures has been emphasized. Only papers published before March 1974 are reviewed, because this work has been finished during this month. (Author) 109 refs.

  8. Valutazione farmacoeconomica della prevenzione con picotamide vs acido acetilsalicilico dei pazienti diabetici con vasculopatia periferica

    Directory of Open Access Journals (Sweden)

    Sergio Iannazzo

    2005-12-01

    Full Text Available Type 2 diabetes mellitus (DM and peripheral arterial disease (PAD are two very relevant cardiovascular (CV risk factors, which can often be found concurrently in the same patient. The DAVID trial, a double-blind, randomized, aspirin(ASA-controlled study, has demonstrated that the use of picotamide, a thromboxane A2 synthase and receptor dual inhibitor, is associated with lesser CV morbidity and mortality in this type of patients in comparison to ASA, considered the standard antiplatelet agent. In order to estimate clinical and economic impacts of picotamide in the Italian health care setting, we developed a pharmacoeconomic model based on clinical data from DAVID and national economic parameters and demographics. The base case scenario, which reflects current prices and reimbursement policy (i.e. ASA fully paid for, picotamide out-of-pocket for patients yielded an incremental cost/effectiveness ratio (ICER of about 8,500 euro/year of life (YOL saved, which falls below conventionally adopted willingness to pay thresholds. This cost, however, is totally born by the patient, while the savings on health care expenditures for avoided events (and less ASA benefit the national health service (NHS. These results may help the physician in explaining the consequences of this choice to his/her patients, facilitating a fully-informed choice. The availability of a theoretical model allowed to explore some alternative scenarios, that indicate that the ICER can be further lowered and the economical burden better distributed through policy changes. In conclusion, the pharmacoeconomic model indicated that picotamide is likely to be a cost/effective option for CV mortality and morbidity prevention in patients with concurrent type 2 DM and PAD and that the level of adoption of this strategy will depend on willingness to pay and policy priorities of the NHS and patients themselves.

  9. Avaliacao da seguranca de diferentes doses de suplementos de acido folico em mulheres do Brasil

    Directory of Open Access Journals (Sweden)

    Quenia dos Santos

    2013-10-01

    Full Text Available OBJETIVO Avaliar a distribuição da ingestão de ácido fólico e a segurança de diferentes doses de suplementos em mulheres em idade reprodutiva. MÉTODOS Foram utilizados dados de consumo a partir de dois dias não consecutivos de registro alimentar de 6.837 mulheres em idade reprodutiva (19 a 40 anos participantes do Inquérito Nacional de Alimentação, módulo da Pesquisa de Orçamentos Familiares 2008-2009. Médias e percentis de consumo habitual de folato natural e ácido fólico foram estimados utilizando o método do National Cancer Institute . Cinco cenários foram simulados somando-se diferentes doses diárias de fortificação (400 mcg, 500 mcg, 600 mcg, 700 mcg e 800 mcg ao ácido fólico oriundo dos alimentos consumidos pelas mulheres. Comparou-se o total de ácido fólico (dieta + suplemento com o nível máximo de ingestão tolerável (UL = 1.000 mcg para definir a dose segura de suplementação. RESULTADOS Mulheres com ingestão habitual de ácido fólico acima do nível máximo de ingestão tolerável foram observadas para doses de suplemento de 800 mcg (7,0% das mulheres. Abaixo desse valor, qualquer dose de suplementação mostrou-se segura. CONCLUSÕES O uso de suplementos de até 700 mcg de ácido fólico mostrou-se seguro.

  10. qualidade do leite cru refrigerado obtido através de ordenha manual ...

    African Journals Online (AJOL)

    Flamengo

    2015-04-15

    Apr 15, 2015 ... pH, titratable acidity and production were submitted to analysis of variance using the ... temperature during the experimental period was 32°C and relative .... conductivity of milk was determined using a conductivity meter.

  11. Glasses obtained from industrial wastes; Vidros obtidos a partir de residuos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Bortoluzzi, D.; Oliveira Fillho, J.; Uggioni, E. [Universidade do Extremo Sul Catarinense (UNESC), Criciuma, SC (Brazil). Curso de Engenharia de Materiais; Bernardin, A.M., E-mail: amb@unesc.ne [Servico Nacional de Aprendizagem Industrial (SENAI), Tijucas, SC (Brazil). Tecnologia em Ceramica

    2009-07-01

    This paper deals with the study of the vitrification mechanism as an inertization method for industrial wastes contaminated with heavy metals. Ashes from coal (thermoelectric), wastes from mining (fluorite and feldspar) and plating residue were used to compose vitreous systems planed by mixture design. The chemical composition of the wastes was determined by XRF and the formulations were melted at 1450 deg C for 2h using 10%wt of CaCO{sub 3} (fluxing agent). The glasses were poured into a mold and annealed (600 deg C). The characteristic temperatures were determined by thermal analysis (DTA, air, 20 deg C/min) and the mechanical behavior by Vickers microhardness. As a result, the melting temperature is strongly dependent on silica content of each glass, and the fluorite residue, being composed mainly by silica, strongly affects Tm. The microhardness of all glasses is mainly affected by the plating residue due to the high iron and zinc content of this waste. (author)

  12. Geopolymer obtained from coal ash; Geopolimeros obtidos a partir de cinzas de carvao mineral

    Energy Technology Data Exchange (ETDEWEB)

    Conte, V.; Bissari, E.S.; Uggioni, E.; Bernardin, A.M., E-mail: amb@unesc.net [Universidade do Extremo Sul Catarinense (UNESC), Criciuma, SC (Brazil). Grupo de Materiais Ceramicos e Vitreos

    2011-07-01

    Geopolymers are three-dimensional alumino silicates that can be rapidly formed at low temperature from naturally occurring aluminosilicates with a structure similar to zeolites. In this work coal ash (Tractebel Energy) was used as source of aluminosilicate according a full factorial design in eight formulations with three factors (hydroxide type and concentration and temperature) and two-levels. The ash was dried and hydroxide was added according type and concentration. The geopolymer was poured into cylindrical molds, cured (14 days) and subjected to compression test. The coal ash from power plants belongs to the Si-Al system and thus can easily form geopolymers. The compression tests showed that it is possible to obtain samples with strength comparable to conventional Portland cement. As a result, temperature and molarity are the main factors affecting the compressive strength of the obtained geopolymer. (author)

  13. Atividade antitumoral dos extratos e frações obtidos de Didymopanax vinosum (Araliaceae)

    OpenAIRE

    Cristiana Madjarof

    2004-01-01

    Resumo: A maioria dos agentes utilizados na quimioterapia acabam por apresentar melhor atividade "antiproliferativa" do que "anticâncer" evidenciando a necessidade de ensaios para a triagem de drogas menos tóxicas, mais seletivas e eficazes para o tratamento dessa doença. A grande diversidade de espécies vegetais com potencial terapêutico presente nos ecossistemas brasileiros, em destaque para os da Amazônia e Cerrado, fornece material para estudos especializados na procura de novas drogas pa...

  14. Uranium accumulation in Brassica rapa L. and effect of citric acid and humic acids as chelating agents; Acumulacion de uranio en Brassica rapa L. y efecto del acido citrico y acidos humicos como agentes quelantes

    Energy Technology Data Exchange (ETDEWEB)

    Lopez del R, H.; Perez C, G. A.; Davila R, J. I.; Mireles G, F. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98060 Zacatecas, Zac. (Mexico); Rodriguez H, G., E-mail: hlopezdelrio@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Agronomia, Carretera Zacatecas-Guadalajara Km 15.5, Cieneguillas, Zacatecas (Mexico)

    2016-09-15

    Phyto extraction is a technique that makes use of plants for the remediation of soils contaminated with heavy metals. In this study the uranium incorporation in the Brassica rapa L. species was evaluated, in artificially contaminated inert soils with 40 mg U/kg, and the effect of adding of the natural chelating agents citric acid and humic acids in the accumulation of uranium was analyzed. Soil free of organic matter and biologically inert was obtained by controlled calcination s of natural soil. Cultures in the prepared soil consisted of five growth treatments: 1) cultivation without uranium or additives; 2) cultivation in the uranium presence; 3) cultivation with uranium and citric acid (2 g/kg); 4) cultivation with uranium and humic acids (10 g/kg); 5) uranium cultivation and combination of citric and humic acids at the same concentrations. There was no adverse effect on plant growth with the presence of uranium at the given concentration. Regarding the controls, the total biomass in the presence of uranium was slightly higher, while the addition of humic acids significantly stimulated the production of biomass with respect to the citric acid. The combined action of organic acids produced the highest amount of biomass. The efficiency of phyto extraction followed the order Humic acids (301 μg U/g) > Non-assisted (224 μg U/g) >> Citric acid + Humic acids (68 μg U/g) > Citric acid (59 μg U/g). The values of uranium concentration in the total biomass show that the species Brassica rapa L. has the capacity of phyto extraction of uranium in contaminated soils. The addition of humic acids increases the uranium extraction while the addition of citric acid disadvantages it. (Author)

  15. Esterification from derivates of styrene by acetic acid using perchloric acid as a catalyzer; Esterificacion de derivados de estireno con acido acetico en presencia de acido perclorico como catalizador

    Energy Technology Data Exchange (ETDEWEB)

    Martinez de la Cuesta, P.J.; Rus Martinez, E.; Palomino sosa, R.; Palomino Perez, F. I. [Departamento deIngenieria Quimica, Facultad de Ciencias, Universidad de Malaga, Malaga (Spain)

    1995-11-01

    The present work is focused to develop the production of esters from derivatives of styrene by acetic acid using perchloric acid as a catalyst. The kinetics of the reaction was studied and analysis of the variables was carried out. 18 refs.

  16. Bacterias halotolerantes/alcalofilas productoras de acido indol acético (AIA asociadas a Arthrospira platensis (Cyanophyceae

    Directory of Open Access Journals (Sweden)

    Liliana Cecilia Gómez Gómez

    2012-07-01

    Full Text Available Título en ingles: Halotolerant alkalophilic and indolacetic acid producing acid producing bacteria associated with Arthrospira platensis (Cyanophyceae Resumen: Este trabajo tuvo como propósito contribuir al conocimiento de la interacción entre la cianobacteria alcalófila Arthrospira platensis y las bacterias que crecen asociadas a su mucilago. Se desarrolló un  medio de cultivo heterotrófico en el cual se aislaron cinco cepas bacterianas asociadas a un monocultivo de A. platensis. Se determinó la capacidad de estas cinco cepas para producir ácido 3- indol acético (AIA. La tipificación molecular de los aislamientos bacterianos permitió identificarlos como Exiguobacterium aurantiacum str. DSM 20416, Xanthomonas sp. ML-122, Halomonas sp. Ap-5, Bacillus okhensis str.  Kh10-101, Indibacter alkaliphilus, type str. LW1T; todas las cepas bacterianas obtenidas  son halotolerantes, alcalófilas y productoras de AIA. Los resultados aportan evidencia para sugerir una interacción benéfica entre A. platensis y sus bacterias asociadas,  quizá como estrategia evolutiva  de cooperación para desarrollarse en  un ambiente hipersalino.    Palabras claves: Bacillus okhensis, Exiguobacterium aurantiacum, Halomonas sp., Indibacter alkaliphilus. Xanthomonas sp. Abstract: The aim of this study was contribute to knowledge over alkalophilic cianobacteryum  Arthrospira platensis  and their  interaction with some associated bacteria growing in their mucilage. Heterotrophic culture medium was designed, in this medium were isolated five bacterial strains associated to single culture of A. platensis. It was measured the 3-indol acetic acid (IAA production by these bacterial strains. Molecular typing allowed identify these bacterial strains like Exiguobacterium aurantiacum str. DSM 20416, Xanthomonas sp. ML-122, Halomonas sp. Ap-5, Bacillus okhensis str. Kh10-101, Indibacter alkaliphilus, type str. LW1T; all these bacteria are halotolerant, alkalophilic and IAA producer.  The findings allow suggest a beneficial interaction between A. platensis and their associated bacteria, maybe as evolutionary strategy of cooperation to grow and develop in  hypersaline environments. Key words: Bacillus okhensis, Exiguobacterium aurantiacum, Halomonas sp., Indibacter alkaliphilus.Xanthomonas sp.

  17. Homocisteína, acido fólico y vitamina B12 en adultos mayores venezolanos

    OpenAIRE

    Meertens G, Lesbia; Díaz W, Nayka; Solano R, Liseti; Baron, Maria Adela; Rodríguez M, Adelmo

    2007-01-01

    Los cambios anatomo-fisiológicos propios del envejecimiento hacen de los adultos mayores un grupo vulnerable a los estados de malnutrición y deficiencias específicas de nutrientes como la vitamina B12 y el folato. El objetivo de este estudio fue establecer la relación existente entre la vitamina B12, folato, homocisteína y el consumo y adecuación de estos nutrientes. Se evaluaron 55 adultos mayores de 60 años de edad, de ambos sexos, no institucionalizados, a quienes se les determinó homocist...

  18. Gas chromatography of alkylphosphonic and dialkyl phosphinic acids; Cromatografia en fase gaseosa de acidos alquifosfonicos y dialquilfosinicos

    Energy Technology Data Exchange (ETDEWEB)

    Gasco Sanchez, L; Barrera Peniero, R; Ramirez Caceres, A; Marin Munoz, M

    1978-07-01

    After carrying out an optimization study on the separation conditions for the TMSr- derivatives, of the hexyl-, cyclohexyl-, heptyl-, and octyl-phosphonic acids; dihexyl dicyclohexyl-, heptyl-, and octyl-phosphinic acids, and dioctyl phosphine oxide, their retention indices (I) at two temperatures and on the OV-1 and OV-17 stationary phase were determined. Correlations between I and molecular structure were established. Calibration factors of these compounds in the flame ionization detector were studied, and the results analyzed taking into account the variables affecting the quantitative results, These results were unbiased but they had a lower precision than that usually achievable in gas chromatography. (Author) 24 refs.

  19. Analise dos meios de cultura para a produção de acido citrico por linhares de Aspergillus niger

    OpenAIRE

    Liliana Agudelo Acosta

    1994-01-01

    Resumo: Foi acompanhado o comportamento de vinte linhagens de Aspergillus niger na produção de ácido cítrico, quando cultivadas em diferentes formas e meios de fermentação. Observou-se que as exigências nutricionais de Aspergillus niger para a produção de ácido cítrico dependem da linhagem e do processo do cultivo. Dentre as linhagens estudadas e nas condições experimentais - fermentação em superfície e submersa em meio natural, escolheram-se as cepas FTPT 906 para a fermentação em superfície...

  20. Alternative disinfectant in drinking water systems. The peracetic acid; Disinfettanti alternativi in potabilizzazione. L`acido peracetico

    Energy Technology Data Exchange (ETDEWEB)

    Ragazzo, Patrizia; Navazio, Giancarlo [Padua, Univ. (Italy). Fac. di Ingegneria. Dipt. dei Processi Chimici dell`Ingegneria; Cavadore, Alberto [Solvay Interox, Rosignano (Italy); Babato, Ferdinando [Consorzio per l`Acquedotto del Basso Piave, S. Dona` di Piave (Italy)

    1997-03-01

    The need to use oxidation techniques in mains water systems, especially when treating surface water, has brought about a greater awareness as to the health risks associated to the presence of residual chemical compounds or disinfection by-products (DBP), which are commonly found in water supplies treated by means of traditional disinfectants (i.e. Cl{sub 2}, ClO{sub 2}, NH{sub 2}Cl, O{sub 3}, etc.). As a consequence, legislative standards have had to define greater restrictions regarding their use. In the light of this situation, the authors have set out to examine the feasibility of employing peracetic acid (PAA), which features low production of DBPs, as an alternative disinfectant. Preliminary experimental tests have been carried out on water samples taken from several process points within a water treatment plant at the Basso Piave mains water system, located in Jesolo, near Venice in Italy. These samples were treated with batch PAA doses ranging from 1 to 5 ppm for a variety of different exposition periods, also with varying temperature, pH and water properties. These experiments made it possible to asses the decay kinetics of PAA as well as reduction of characteristic microbiological parameters in raw and treated incoming and outgoing water throughout the various stages of the treatment process. The results achieved during these tests appear to provide ample evidence regarding the possibilities of use for PAA (with medium dosage of 1.5 to 2 ppm, contact times from 30` to 60` and abatement up to 95 %), after having assessed its compatibility, especially in order to the increase of the assimilable organic carbon, with the characteristics of the plant and distribution network, by continuous reactors and pilot plants.

  1. New heterogeneous acid catalysts in the synthesis of biodiesel; Estudo de novos catalisadores heterogeneous acidos na sintese de biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Soldi, Rafael A.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Lab. de Polimeros Sinteticos], e-mail: mafco@quimica.ufpr.br; Oliveira, Angelo R.S.; Ramos, Luiz P. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Centro de Pesquisa em Quimica Aplicada (CEPESQ)

    2007-07-01

    In this work, sulfonated polystyrene compounds (PSS) were synthesized from linear polystyrene (PS). Several methods and experimental conditions were investigated for the sulfonation of PS, producing catalytically active polymeric materials with sulfonation degrees in the range of 5.0-6.2 mmol -SO{sub 3}H/g of dry polymer. The performance of these catalysts was evaluated in transesterification reactions of beef tallow and vegetable oils with ethanol and methanol. For the sake of comparison, the same reaction conditions employed for the PSS catalysts were also used for an Amberlyst 15 (3,7 mmol SO{sub 3}H/g - Aldrich). The PSS samples were shown to be insoluble in the reaction media, leading to conversion rates of 85%, 75% and 80% of the refined soybean oil, beef tallow and crude corn oil in to ethyl esters, respectively, and 94% of the refined soybean oil methyl esters. Amberlyst 15 was studied as an alternative to the process, but its conversion rate to alkyl esters was very low in the employed conditions. These results demonstrated that our synthetic PSS materials have a great potential to act as heterogeneous catalysts for transesterification. (author)

  2. Oxidos de colesterol, colesterol, lipidios totais e composição de acidos graxos em carne de peru

    OpenAIRE

    Sueli Regina Baggio

    2000-01-01

    Resumo: Considerando que o colesterol é um esterol largamente distribuído no reino animal, susceptível à oxidação quando exposto ao ar, a temperaturas elevadas, luz, radiação ou à combinação destes fatores, pode ocorrer a formação de vários produtos de oxidação, tais como: 25-hidroxicolesterol; colestan-3 beta-5alfa-6 beta-triol; 5,6alfa-epoxicolesterol; 5,6 beta-epoxicolesterol; 7alfa-hidroxicolesterol; 7 beta-hidroxicolesterol; 7-cetocolesterol e colesta-4,6-dien-3-ona. Estes compostos são ...

  3. Immobilization of citric acid solutions in portland cement; Imobilizacao de solucoes de acido citrico em cimento Portland

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Valdir M.; Rzyski, Barbara M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1997-12-01

    Decontamination processes by using citric acid on certain items used in the nuclear area, can result in large volumes of liquid wastes with low activity or effluents, contaminated with uranium and some elements dangerous to the environment. A great number of installations that have decontamination processes adopt the zero discharge philosophy. So, one of the forms to isolate the solutions is by reducing its volume through the evaporation process. The generated must can be neutralized and encapsulated or immobilized in Portland cement. This work propose a chemical technique to destroy the citric acid in the decontamination solutions instead of neutralization and, depending on the installation convenience, a direct cement immobilization of these solutions or of the evaporation mud. The results obtained in this work involve data about the workability, setting time and mechanical resistance, after 28 days of sealed cure, for samples with water-cement ratios of 4, 0.5 and 0.6, by weight. (author). 5 refs., 2 tabs.

  4. Carboxymethylcellulose hydrogel crosslinked with citric acid for biomedical application; Reticulacao de hidrogeis de carboximetilcelulose com acido citrico para aplicacoes biomedicas

    Energy Technology Data Exchange (ETDEWEB)

    Capanema, Nadia S.V.; Mansur, Alexandra A.P.; Mansur, Herman S., E-mail: nsvnadia@gmail.com [Centro de Nanociencias, Nanotecnologia e Inovacao (CeNano), MG (Brazil); Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Metalurgica e Materiais

    2016-07-01

    The carboxymethylcellulose (CMCel) has been extensively used in order application as flexible polymer membrane. Biopolymers crosslinked have been studied to optimize their performance in biomedical applications. In this work, CMCel films with a degree of substitution (DS = 0.77) were prepared by evaporation of solvent and crosslinked with different concentrations of citric acid (CA). The synthesized CMCel was characterized by Infrared Spectroscopy by Fourier Transform X-ray spectroscopy (FTIR), and morphology assessed by scanning electron microscopy (SEM). Morphological analysis performed using the SEM indicated the crosslinked CMCel and not crosslinked with a very smooth and uniform appearance. The FTIR results indicated the modification of existing bands and appearance of a new band 1715 cm{sup -1} suggesting that there has been change in the structure of the crosslinked CMCel. (author)

  5. Producción de acido láctico por Lactobacillus plantarum L10 en cultivos batch y continuo

    Directory of Open Access Journals (Sweden)

    Waldir Estela

    2013-04-01

    Full Text Available Se ha ensayado a escala de laboratorio la cepa Lactobacillus plantarum L10, para la producción de ácido láctico en cultivos batch y continuo; además se ha optimizado la composición del medio y las condiciones de cultivo para este propósito. Los mejores parámetros de producción de ácido láctico encontrados en cultivo batch fueron los siguientes: YP/S 86,1%; PP 5,4 g/L/h; unido a YX/S 13,2%; PX 1,2 g/L/h y μ = 0,2 h-1, el cultivo se ha llevado a cabo en un medio conteniendo glucosa 70 g/L; extracto de levadura 12,1 g/L; KH2PO4 1,2 g/L; (NH42HPO4 1,2 g/L; citrato de amonio 3,0 g/L; MgSO4. 7H2O 0,3 g/L y MnSO4. 4H2O 0,03 g/L. Así mismo los mejores parámetros de producción de ácido láctico encontrados en cultivo continuo fueron los siguientes: YP/S 96%; P´P 6,0 g/L/h; unido a YX/S 19 %; P´X 1,2 g/L/h; y tasa de dilución (D 0,46 h-1.

  6. Revisión de los niveles de acidos grasos trans encontrados en distintos tipos de alimentos

    Directory of Open Access Journals (Sweden)

    Vicario, I. M.

    2007-03-01

    Full Text Available In this paper a comprehensive review of trans-fatty acid levels reported in different types of food products is offered. The lowest levels are found in some types of bread (0,1% while the highest levels (up to 40% are found in fried potatoes. Some foods like shortenings, cakes and pastries may have up to 30% of these fatty acids. In milk and dairy products the reported levels are between 1.50% and 5.20%, in meat and derived products between 0.20% and 21,30%; in chocolates from 0% to 15, 70%. The greatest variability is found in margarines, where a variety has been reported from “trans-free products” to products containing up to 34. 30%. In relation to the trans-fatty acid profile, 18:1t is the most abundant fatty acid found in the majority of foods, followed by C18:2t, C18:3t, C18:1t y C14:1t. Due to the negative health effects of these fatty acids, there is a trend to reduce their levels in food products and to include them in the nutritional label of food packaging.En este trabajo se realiza una exhaustiva revisión bibliográfica de los contenidos en grasos trans en alimentos de distinto origen. Los niveles más bajos se encuentran en algunos tipos de pan (0,10%, y los más elevados (hasta 40%, en algunas muestras de patatas fritas. Alimentos tales como shortenings, algunos tipos de galletas y bollería contienen hasta el 30% de dichos ácidos grasos. En las leches y derivados se encuentran cantidades entre 1,50% y 5,20%; en carnes y derivados entre 0,20% y 21,30%; en chocolates desde cantidades nulas hasta 15,70%. La mayor variabilidad se registra en margarinas, entre las que se encuentran desde las “libres de trans”, hasta algunas con 34,30% de estos ácidos grasos. En cuanto a los distintos isómeros, el mayoritario es el C18:1t seguido del C18:2t, C18:3t, C18:1t y C14:1t. Debido a los efectos desfavorables que presentan sobre la salud se observa en los últimos años una tendencia a reducir este tipo de ácidos grasos en algunos alimentos y a incluirlos en el etiquetado nutricional de los alimentos.

  7. Volatile fatty acid degradation kinetics in anaerobic process; Cinetica de la degradacion de acidos grasos volatiles en procesos anaerobios

    Energy Technology Data Exchange (ETDEWEB)

    Riscado, S.; Osuna, B.; Iza, J.; Ruiz, E. [Universidad del Pais Vasco. Bilbao (Spain)

    1998-10-01

    While searching for the optimal substrate load for anaerobic toxicity assays, the inhibition caused by the propionic acid has been addressed. Lab scale experiments have been carried out to assess the effects of different loads and acid ratios. Results bad been subjected to kinetic analysis and show the degradation follows a first order kinetic, and acetic is easier to degrade than propionic acid. The optimal load for a 100 ml vial assay is composed of 158 mg COD of the 3:1:1 HAc:HPr:HBu mixture. (Author) 9 refs.

  8. ANÁLISE DAS PROPRIEDADES FÍSICAS DO CONCRETO OBTIDO COM USO DE POLIETILENO TEREFTALATO (PET

    Directory of Open Access Journals (Sweden)

    Cassio Fabian S. Campos

    2014-12-01

    Full Text Available In Brazil the industry that produces PET (Polyethylene Terephthalate bottles is a recent and growing exorbitantly increasing problems caused by inappropriate disposal of this material on the environment. On the other hand, the civil construction increases every year by removing the sand from the environment to manufacture of concrete. This study aimed to analyze the partial replacement of sand by PET crushed in concrete production, aiming to reduce the extraction of sand from the environment and reduction of solid waste and develop a new material for construction. For this, sample cylindrical were produced, partially replacing the sand and tested its resistance according to NBR 5738 (ABNT, 2003 and NBR 5739 (ABNT, 1994. Was found that examined the ecological alternative is feasible execution in case of construction of simple street furniture, such as example: sidewalks and gutters whose resistance required is in the range of 10MPa to 15MPa.

  9. Neutron activation analysis of phytotherapic obtained from medicinal plants; Analise por ativacao com neutrons de fitoterapicos obtidos de plantas medicinais

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Henrique S. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: hs_moreira@hotmail.com; Saiki, Mitiko; Vasconcellos, Marina B.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mails: mitiko@ipen.br; mbvascon@ipen.br

    2007-07-01

    This paper determines the inorganic constituents in phytotherapic samples for posterior study of the relationship existent among the concentrations of the found elements and the their possible therapeutical effects. The samples of phytotherapic pills (Centella asiatica, Ginkgo biloba and Ginseng) were analysed by using neutron activation analysis (NAA). The As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sc, Se and Zn samples were determined in the phytotherapics, The Centella asiatica presented the higher concentrations of Br, Co, Cr, Fe, K, La, Na, Rb, Sc, Se and Zn. In the sample of Ginko biloba, higher levels of As and Ca were found, while in the sample ol Ginseng the element As were not detected. The found results have shown the the NAA method is appropriated for analysing this type of materials due to his simplicity, multielemental capacity and quality of the results obtained. (author)

  10. Bio-flex obtained from pyrolysis of biomass as fuel; Bio-flex obtido da pirolise de biomassa como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Mesa Perez, Juan Miguel; Viltre Rodriguez, Roberto Alfonso; Marin Mesa, Henry Ramon [Bioware Tecnologia, Campinas, SP (Brazil); Rocha, Jose Dilcio [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico; Samaniego, Manuel Raul Pelaez [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Planejamento de Sistemas Energeticos; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola

    2006-07-01

    This paper describes the BIOWARE experience in the bio fuel production from biomass residues. Fast pyrolysis of a mixture of sugar cane trash and elephant grass carried out in a fluidized bed reactor with capacity of 200 kg/h dry feed (12% w/w). The co-products particulate charcoal, acid extract, and bio-oil were obtained. The fast pyrolysis pilot plant PPR-200 belonged to UNICAMP and is operated by BIOWARE personnel. This paper presents the chemical rote to bio-flex production (a kind of bio diesel from acid esterification) from pyrolytic carboxylic acids. Both ethanol and methanol were used as reactant but higher yields were found with methanol. (author)

  11. Synthesis and characterization of sulfonated polyesters derived from glycerol; Sintese e caracterizacao de poliesteres sulfonados obtidos a partir do glicerol

    Energy Technology Data Exchange (ETDEWEB)

    Fiuza, R.A.; Jose, N.M.; Boaventura, J.S. [Universidade Federal da Bahia (IQ/UFBA), Salvador, BA (Brazil). Inst. de Quimica; Fiuza, R.P. [Universidade Federal da Bahia (EP/UFBA), Salvador, BA (Brazil). Escola Politecnica. Curso de Mestrado em Engenharia Quimica

    2010-07-01

    In this work were synthesized polyesters from glycerol and acid sulfonated phthalic previously. The materials were characterized by DSC, TGA, FTIR, SEM, XRD and XRF. The results showed effective sulfonation of phthalic acid. The presence of sulfonic groups promoted strong changes in the crystallinity of the new material makes the lens. The polyesters made from phthalic acid sulfonated combine characteristics such as heat resistance and groups that drivers potentiate the electrolyte for application in fuel cells proton exchange membrane and also for gas separation. (author)

  12. Carbon/Clay nanostructured composite obtained by hydrothermal method; Compositos nanoestruturados carbono/argila obtidos por metodo hidotermico

    Energy Technology Data Exchange (ETDEWEB)

    Barin, G.B.; Bispo, T.S.; Gimenez, I.F.; Barreto, L.S., E-mail: gabriela.borin@gmail.co [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Souza Filho, A.G. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Fisica

    2010-07-01

    The development of strategies for converting biomass into useful materials, more efficient energy carrier and / or hydrogen storage is shown a key issue for the present and future. Carbon nanostructure can be obtained by severe processing techniques such as arc discharge, chemical deposition and catalyzed pyrolysis of organic compounds. In this study we used hydrothermal methods for obtaining nanostructured composites of carbon / clay. To this end, we used coir dust and special clays. The samples were characterized by infrared spectroscopy, X-ray diffraction and Raman. The presence of the D band at 1350 cm{sup -1} in the Raman spectrum shows the formation of amorphous carbon with particle size of about 8.85 nm. (author)

  13. Qualidade de dados fluviométricos obtidos através de perfilamento acústico

    Directory of Open Access Journals (Sweden)

    Mateus Ricardo Nogueira Vilanova

    2013-06-01

    Full Text Available Perfiladores acústicos Doppler de corrente são, na atualidade, a principal opção para medição de vazão e monitoramento hidrodinâmico de cursos d'água, em substituição aos métodos tradicionais. A disseminação desse tipo de equipamento deve-se, principalmente, às suas vantagens operativas, que vão da rapidez de medição até o maior detalhamento e quantidade de informações geradas sobre a hidrodinâmica das seções hidrométricas. Assim como no emprego de métodos e equipamentos tradicionais, o uso de perfiladores acústicos Doppler deve ser pautado pela busca da qualidade dos dados, uma vez que estes são a base para projetos e gestão de obras e sistemas de recursos hídricos. Nesse sentido, o trabalho apresenta uma análise das incertezas de medição de uma campanha hidrométrica realizada no Rio Sapucaí (Piranguinho-MG, utilizando dois perfiladores Doppler distintos: um ADCP Rio Grande 1.200 kHz e um Qmetrix Qliner. Foram realizadas 10 medições consecutivas com cada equipamento, seguindo-se os protocolos de qualidade existentes na literatura e, posteriormente, uma análise de incerteza do Tipo A (ou seja, análise estatística de várias observações independentes das grandezas de entrada sob as mesmas condições. As medições do ADCP e Qliner apresentaram, respectivamente, incertezas-padrão de 0,679% e 0,508% em relação às médias. Tais resultados são satisfatórios e aceitáveis quando comparados a referências da literatura, indicando a validade do uso de perfiladores Doppler para a expansão de redes fluviométricas e geração de dados hidrológicos.

  14. Elementos indicativos de abuso sexual na infância obtidos pelo método Rorschach

    Directory of Open Access Journals (Sweden)

    Maria da Graça Gastal Borges Fortes

    2008-01-01

    Full Text Available Objetivo: Determinar indicativos de abuso sexual infantil através do Método Rorschach em crianças atendidas pela Equipe de Proteção à Criança do Hospital de Clínicas de Porto Alegre no período entre 2002 e 2003. Métodos: Estudo retrospectivo qualitativo e quantitativo de nove crianças, com idades entre quatro anos e seis meses e onze anos, abusadas sexualmente, cuja ocorrência do fato foi verbalizada pelas próprias ou por seus responsáveis. Todas tiveram confirmação por médicos pediatras da própria instituição do abuso sexual sofrido. Todos os pacientes foram testados pelo método Rorschach com resultados supervisionados por profissional do Serviço de Psicologia da instituição. A partir do laudo e das respostas encontradas nos protocolos foram criadas categorias para o estu-do. Para a codificação das respostas foi utilizado o sistema de classificação de Klopfer. Resultados: O Método Rorschach forneceu indicativos de abuso sexual nas nove crianças estudadas. Depressão, ansiedade, impulsividade, dificuldades nos relacionamentos, foram características de personalidade que apareceram com maior freqüência. Na análise dos protocolos surgiram conteúdos traumáti-cos, tais como sangue, sexo, morbidez, medo e movimento agressivo. Conclusões: Este trabalho mostrou que o Método Rorschach pode fornecer indicativos de abuso sexual. Pela análise dos laudos se observou que as crianças estudadas apresentaram dificuldades relativas à estruturação de uma personalidade saudável.

  15. ÁGUA EXÓGENA EM SUCO DE UVA OBTIDO PELO MÉTODO DE ARRASTE A VAPOR

    OpenAIRE

    Bresolin, Bruna; Gularte, Márcia Arocha; Manfroi, Vitor

    2013-01-01

    O consumo de suco tem aumentado nos últimos anos devido ao aumento da procura, por parte dos consumidores, por alimentos saudáveis, e o suco de uva é rico em substâncias antioxidantes, benéficas a saúde. A comercialização de suco de uva de janeiro a março deste ano já foi 22,31% superior ao comercializado em 2010. O método de extração do suco de uva por arraste a vapor é muito utilizado por pequenos produtores na Serra Gaúcha, RS que industrializam sua produção, agregando valor à matéria-prim...

  16. NOVOS GENÓTlPOS DE TRIGO (Triticum aestivum L. OBTIDOS POR IRRADIAÇÃO GAMA

    Directory of Open Access Journals (Sweden)

    C.E. de O. CAMARGO

    1997-09-01

    Full Text Available Compararam-se dezesseis linhagens mutantes tolerantes à toxicidade de alumínio em solução nutritiva, uma linhagem mutante sensível e os cultivares Anahuac, IAC-60 e IAC-24, de trigo. As linhagens mutantes foram originárias de seleções realizadas em populações do cultivar Anahuac (sensível ao Al3+ cujas sementes foram submetidas ao tratamento de irradiação gama com as doses de 260 e 310 Gy. As comparações foram realizadas em dois locais através de seis experimentos em épocas diferentes, analisando-se a produção de grãos, características agronômicas e tolerância a solos ácidos. Quinze linhagens mutantes foram mais produtivas que o cultivar Anahuac e a linhagem mutante sensível ao Al3+, em Capão Bonito, em solo ácido e em condição de sequeiro. Nestas condições, o cultivar IAC-60 foi o que exibiu a maior produtividade, diferindo dos demais. Todos os genótipos estudados não diferiram entre si, quanto à produtividade de grãos, em Tatuí, em solo corrigido e com irrigação por aspersão. Irradiação gama no cultivar Anahuac foi eficiente possibilitando a seleção de linhagens mutantes com características agronômicas (altura de planta, ciclo da emergência ao florescimento, comprimento da espiga, número de espiguetas por espiga, número de grãos por espiga e espigueta e peso de 100 grãos similares às do cultivar original, porém com tolerância à toxicidade de Al3+, tornando possível o seu cultivo em solos ácidos.Sixteen mutant lines tolerant to Al3+ toxicity in nutrient solutions, and a mutant line, sensitive to Al3+ originated from selections of a population of the cultivar Anahuac (sensitive to Al3+ previously submitted to gamma irradiation (260 and 310Gy, and the check cultivars Anahuac, IAC-24 and IAC-60, were evaluated in two locations and six trials, for grain yield, agronomic characteristics and tolerance to acid soils. ln Capão Bonito, in an acid soil and upland conditions, fifteen mutant lines presented higher grain yield in comparison to the cultivar Anahuac and the Al3+ sensitive mutant line. The cultivar IAC-60 exhibited the highest productivity. ln Tatuí, in a limed soil, sprinkler irrigated, no difference was observed in grain yield among the tested genotypes. Gamma irradiation of seeds of the Anahuac cultivar was efficient to select mutant lines with similar agronomic characteristics (plant height, days from emergence to flowering, spike length, number of spiklets per spike, number of grains per spike and spiklet, and weight of 100 grains in relation to the cultivar Anahuac, presenting however tolerance to Al3+ toxicity, which enables them to be cutivated in acid soil conditions.

  17. Comparação do Índice de Torg obtido por meio de radiografia e ressonância magnética nos pacientes com mielopatia cervical espondilótica Comparación del Índice de Torg, obtenido por medio de radiografía y resonancia, en los pacientes con mielopatía espondilótica cervical Comparison of the Torg Index obtained by radiography and magnetic resonance in patients with spondylotic cervical myelopathy

    Directory of Open Access Journals (Sweden)

    Alexandre de Oliveira Zam

    2012-01-01

    Full Text Available OBJETIVO: A Mielopatia Cervical Espondilótica (MCE é uma disfunção da medula espinhal relacionada à degeneração típica do envelhecimento. No estudo de imagem podemos obter a medida do Índice de Torg, para estimar a estenose cervical. Objetivamos, assim, medir o Índice de Torg através de radiografia e ressonância magnética (RM, possibilitando verificar possíveis discrepâncias entre os métodos de medida. MÉTODOS: Realizada mensuração do Índice de Torg na radiografia e na RM da coluna cervical, sendo obtido através da relação entre a superfície posterior do corpo vertebral e o ponto mais próximo à linha laminar correspondente, dividido pelo diâmetro sagital do corpo vertebral. RESULTADOS: Participaram 29 pacientes, sendo 10 mulheres e 19 homens, com médias de idade 48,1 ± 11 anos, de peso 68,7 ± 5 Kg e de altura 1,68 ± 0,6 m. Houve diferença significativa entre o Índice de Torg calculado através de radiografia e RM, sendo menores os índices observados na RM (radiografia: 0,73 ± 0,17 vs. RM: 0,48 ± 0,14, pOBJETIVO: La Mielopatía Cervical Espondilótica (MCE es un trastorno relacionado con la degeneración de la médula espinal, típica del envejecimiento. En el estudio de imagen se puede obtener la medida del Índice de Torg para estimar la estenosis cervical. Nuestro objetivo es, por tanto, medir el índice de Torg mediante rayos-X y resonancia magnética (RM, posibilitando verificar posibles discrepancias entre los métodos de medición. MÉTODOS: Se realiza la medición del Índice de Torg en la radiografía y en la resonancia magnética de la columna cervical, siendo obtenido mediante la determinación de la relación entre la superficie posterior del cuerpo vertebral y el punto más cercano a la línea de la lámina correspondiente, dividido por el diámetro sagital del cuerpo vertebral. RESULTADOS: Participó un total de pacientes 29, siendo 10 mujeres y 19 hombres, edad promedio de 48,1 ± 11 años, peso

  18. Determinación espectrofluorimétrica de fitohormonas derivadas del indol y del naftaleno

    OpenAIRE

    Blanc García, María del Rosario

    2014-01-01

    Se realiza el estudio de las propiedades fluorescentes y la puesta a punto de metodología espectrofluorimétrica en disolución y en fase sólida para la determinación en aguas, suelos y formulaciones comerciales de las fitohormonas derivadas del indol: acido indol-3-acetico. acido indol-3-butirico, acido indol-3-propinoico y acido 5-hidroxiindol-3-acetico; y del naftaleno: acido 1-naftilacetico y 1-naftilacetamida. se lleva a cabo la determinación individual de cada una de las fitohormonas as...

  19. Analytical methods for 2,4-D (Dichlorophenoxyacetic acid) determination; Metodos analiticos para la determinacion del 2,4-D (Acido diclorofenoxiacetico)

    Energy Technology Data Exchange (ETDEWEB)

    Martinez G, M.S.M

    1999-06-01

    The 2,4-D herbicide is one of the main pesticides for controlling the bad grass in crops such as the water undergrowth. In Mexico the allowed bound of this pesticide is 0.05 mg/l in water of 2,4-D so it is required to have methods trusts and exacts, which can used in order to detected low concentration of it. In this work we show some for the conventional techniques and for establishing the 2,4-D concentrations. The UV-Vis spectrometer and liquids chromatography due that they are the most common used nowadays. Beside, we introduce a now developed technique, which is based on the neutronic activation analysis. Though use of the UV-Vis spectrometer technique it was possible target the concentrations interval between 1 and 200 mg/l. In the liquids chromatography interval was between 0.1 and 0.9, and by the neutronic activation analysis the interval was between 0.01 and 200 mg/l. (Author)

  20. Basicity determination for neutral phosphorus organic extragents by NMR 31P-method in two-phase systems, and quantitative interrelations of acido-basic extractive properties

    International Nuclear Information System (INIS)

    Laskorin, B.N.; Yakshin, V.V.; Meshcheryakov, N.M.; Yagodin, V.G.

    1988-01-01

    Consideration is given to the method for determination of basicity of neutral organophosphorus compounds of XGZP=0 type (X, G, Z=C 4 H 9 , C 8 H 17 , C 6 H 5 ). The method is based on change of chemical shift of phosphorus-31 nuclei in two-phase extraction system depending on acidity function H O , H A , H PO . It is shown that the method can be used for evaluation and forecasting of phosphine oxide ability in the processes of UO 2 SO 4 solvent extraction from aqueous solutions of sulfuric acid

  1. Myrsinoic A acid and its derivative: in vitro inhibitors of photosynthesis; Acido myrsinoico A e derivado: inibidores da fotossintese in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Burger, Marcela Carmen de M.; Oliveira, Gracielle S. de; Menezes, Antonio Carlos S [Universidade Estadual de Goias, Anapolis, GO (Brazil). Unidade Universitaria de Ciencias Exatas e Tecnologicas; Vieira, Paulo Cezar; Silva, Maria Fatima das G.F. da [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Dept. de Quimica; Veiga, Thiago A.M., E-mail: tveiga@unifesp.br [Universidade Federal de Sao Paulo (UNIFESP), SP (Brazil). Inst. de Ciencias Ambientais, Quimicas e Farmaceuticas. Dept. de Ciencias Exatas e da Terra

    2012-07-01

    Myrsinoic A acid, isolated from Myrsine cuneifolia and its hydrogenated derivative had their effect on photosynthesis tested. The compounds inhibited the electron flow (basal, phosphorylating and uncoupled) from water to methyl viologen; therefore, they act as Hill reaction inhibitors in spinach thylakoids. They inhibited partial reactions of PSII electron flow from water to 2,5-dichloro-1,4-benzoquinone, from water to sodium silicomolybdate, and partially electron flow from diphenylcarbazide to 2,6-dichloroindophenol. Their inhibition sites were at the donor and acceptor sides of PSII, between P{sub 680} and Q{sub A}. Chlorophyll {alpha} fluorescence measurements confirmed the behavior of the compounds (pool of quinones). (author)

  2. Kraft pulp bleaching with molybdenum activated acid peroxide (P{sub Mo} stage); Branqueamento de polpa celulosica kraft de eucalipto com peroxido acido ativado por molibdenio

    Energy Technology Data Exchange (ETDEWEB)

    Rabelo, Marcos Sousa [Servico Nacional de Aprendizagem Industrial (SENAI), Lauro de Freitas, BA (Brazil). Dept. Regional da Bahia; Silva, Vanessa Lopes; Barros, Denise Pires de; Colodette, Jorge Luiz [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Florestal; Sacon, Vera Maria; Silva, Marcelo Rodrigues da [Votorantim Celulose e Papel, Jacarei, SP (Brazil)

    2009-07-01

    Optimum conditions to run the P{sub Mo} stage for bleaching eucalyptus kraft pulp were 90 deg C, pH 3.5, 2 h, 0.1 kg/t Mo and 5 kg/t H{sub 2}O{sub 2}. The P{sub Mo} stage efficiency increased with decreasing pH (1.5-5.5) and increasing temperature (75-90 deg C), time (2-4 h), and hydrogen peroxide (3-10 kg/t) and molybdenum concentration (0.1-0.4 kg/t). The implementation of the P{sub Mo} stage, as replacement for the A stage, decreased total active chlorine demand of the OAZDP sequence by 6 kg/t to reach 90% ISO, both in laboratory and mill scale. Such practice resulted in decreased bleaching chemical costs to produce fully bleached pulp of 90% ISO. (author)

  3. DESARROLLO Y OPTIMIZACION TECNOLOGICA DE ACEITES MARINOS PARA INCREMENTAR EL.e-CONTENIDO DE ACIDOS GRASOS OMEGA 3 DE CADENA LARGA EN CARNES DE A VES Y CERDOS

    OpenAIRE

    Bórquez Lagos, Fernando

    2013-01-01

    • Origen (problema que resuelve u oportunidad que aprovecha)Investigaciones desarrolladas en los últimos años han permitido conocer la función y efecto que tienen los ácidos grasos poli-insaturados de cadena larga (AGPICL) omega 3, particularmente el Ácido Eicosapentaenoico (EPA) y el Ácido Docohexaenoico (DHA), en la prevención de enfemedades cardiovasculares, en el desarrollo del tejido nervioso, del órgano de la visión, de mecanismos que mejoran la inmunidad, etc. Su consumo esta aso...

  4. Spectrophotometric determination of titanium with ascorbic acid in aluminium alloys and other materials. Determinacion espectrofotometrica de titanio con acido ascorbico en aleaciones de base aluminio y otros materiales

    Energy Technology Data Exchange (ETDEWEB)

    Bosch Serrat, F. (Departamento de Quimica Analitica. Facultad de Qauimica. Valencia (Spain))

    1994-01-01

    A spectrophotometric determination of titanium with ascorbic acid in aluminium alloys and bauxite is described. The proposed procedures permit to determine levels of titanium down to 5.10 ''3% with a good accuracy and precision. (Author) 13 refs.

  5. Natural Radiation in byproducts of the production of phosphoric acid; Radiacao natural em residuos gerados no processo de producao de acido fosforico

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Marcilei A. Guazzelli da; Cardoso, L.L., E-mail: marcilei@fei.edu.br [Centro Universitario da FEI, Sao Bernardo do Campo, SP (Brazil); Medina, N.H. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Institutlo de Fisica

    2014-07-01

    Natural radiation is the largest source of radiation exposure to which man is subject. It is formed basically by cosmic radiation and the radionuclides present in the Earth crust, as {sup 40}K and the elements of the decay series of {sup 232}Th and {sup 238}U. Phosphate ores, which constitutes the raw material for the production of phosphoric acid, have a high rate of natural radiation from the decay series of {sup 232}Th and {sup 238}U. Phosphogypsum, which is naturally radioactivity, is a by-product of the production of phosphoric acid by the wet method. For each ton of phosphoric acid it is produced about 4.5 tons of phosphogypsum. This work presents the analysis of samples collected in all stages of the manufacturing process of phosphoric acid, which generates the phosphogypsum. Gamma-ray spectrometry was used to measure the concentration of the elements of the decay series of {sup 232}Th and {sup 238}U. All analyzed samples showed a high concentration of radionuclides, promoting the need for further steps in the process in order to reduce the presence of such radionuclides in the phosphogypsum. The results indicate the radionuclide {sup 238}U has higher contribution in some samples of the intermediate stages of the process. All samples exceeded the international average range of human exposure to terrestrial gamma radiation, which is 0.3 to 1.0 mSv/year. (author)

  6. Effect of the temperature and oxalic acid in the uranyl sorption in zircon; Efecto de la temperatura y acido oxalico en la sorcion de uranilo en circon

    Energy Technology Data Exchange (ETDEWEB)

    Ordonez R, E.; Almazan T, M. G.; Garcia G, N. [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Hernandez O, R., E-mail: eduardo.ordonez@inin.gob.mx [Instituto Tecnologico de Veracruz, Ingenieria Quimica, Miguel Angel de Quevedo No. 2779, 91860 Veracruz (Mexico)

    2012-10-15

    In this work the results of the temperature effect study are presented on uranyl solutions adsorbed on zirconium silicate (ZrSiO{sub 4}) and also on the compounds formed in surface with oxalic acid. The adsorption isotherms of uranyl on hydrated zircon with NaClO{sub 4} 0.5 M, show an increase of the uranyl sorption efficiency when increasing the temperature from 20 to 4 C with a sudden descent in this efficiency when changing the temperature at 60 C. The uranyl sorption efficiency increases to hydrate the zircon with a solution of oxalic acid 0.1 M, maintaining the same tendency regarding to the temperatures of the sorption in medium NaClO{sub 4} 0.5 M. The complex formation in the zircon surface with organic acids of low molecular weight increases the fixation of the uranyl in solution due to the formation of ternary systems, in the order Zircon/A. Organic/Uranyl, without altering their response to the temperature. (Author)

  7. Description and implementation of acid/base titrimetric techniques for process monitoring; Descripcion e implementacion de tecnicas titrimetricas acido/base para la monitorizacion de procesos

    Energy Technology Data Exchange (ETDEWEB)

    Marcelino Represa, M.; Guisasola i Canudas, A.; Casa Alvero, C.; Lafuente Sancho, F. J.

    2006-07-01

    The basis of titrimetric techniques is that the proton production (or consumption) rate can be indirectly measured with the amount of base (or acid) dosage necessary to maintain the pH at a certain setpoint value. Titrimetric measurements are very useful for the monitoring of any process that influences pH with simple equipment (an accurate pH control loop). This work describes the theoretical basis of titrimetric measurements and shows three examples of the application of titrimetric techniques for the process monitoring: CO{sub 2} absorption, nitrification and biological organic matter removal. (Author)

  8. Behaviour of the 1-Ascorbic as supporting Electrolyte. Influence of the Magnesium Ion; Comportamiento del acido 1-Ascorbico como electrolito soporte influencai del ion magnesio

    Energy Technology Data Exchange (ETDEWEB)

    Alonso Lopez, J

    1962-07-01

    The behaviour of 1-ascorbic acid, as supporting electrolyte of the uranyl ion in a 0{sub 1}-0.7 M concentration range, and the influence of pH on the diffusion current and half wave potential of 0,1 M uranyl ion is studied. The cathodic waves from 0 to -2,5 volts, with mercury dropping electrode are studied in fresh 0,1 M aqueous solution in presence of Mg{sup 2}+ and at 2,0-12 pH range. A kinetic current with a half wave potential of 0,85 v. vs. Hg. b.e. is obtained at pH> 9,5 appears a tilth wave a -0,60 v. The pH variation does not influence these potentials. (Author) 18 refs.

  9. Obtención de Acido Poli Láctico a partir de lactosuero para la fabricación de empaque primarios.

    OpenAIRE

    Cuichán Guanoluisa, Remigio Ismael

    2015-01-01

    En la Provincia de Chimborazo, Cantón Riobamba, se evaluó la obtención de ácido poliláctico (APL), a partir de lactosuero para la fabricación de empaques primarios, teniendo un total de 16 unidades experimentales, distribuidas en 4 tratamientos (4 niveles de plastificante 1.5, 2.0, 2.5 y 3.0 %) y 4 repeticiones en cada uno. Los resultados experimentales fueron analizados mediante el análisis de varianza y la separación de medias con la prueba de Tuckey, con la finalidad de dete...

  10. DETERMINACIÓN DE RESIDUOS DE GLIFOSATO Y DE SU METABOLITO ACIDO AMINOMETILFOSFONICO EN AGUAS MEDIANTE CROMATOGRAFIA LIQUIDA DE ALTA EFICIENCIA CON DERIVACION POSCOLUMNA Y DETECCION POR FLUORESCENCIA

    Directory of Open Access Journals (Sweden)

    Hugo A Rodríguez

    2010-11-01

    Full Text Available El glifosato es un herbicida no selectivo,ampliamente utilizado en el mundo para controlar malezas anuales y perennes. Su principal metabolito en suelos y aguas es el ácido aminometilfosfónico (AMPA formado por la acción de microorganismos. Este herbicida se utiliza en Colombia en altas dosis para la erradicación de cultivos ilícitos de coca y amapola, y como madurante en caña de azúcar, constituyendo un problema ambiental y social en el país, y haciéndose necesaria la evaluación de residuos de glifosato y su metabolito en diferentes matrices. En este trabajo se validó una metodología analítica para determinar residuos de glifosato y de su metabolito AMPA en aguas de influencia de algunas regiones colombianas. El procedimiento experimental comprende dos pasos principales: el primero es un paso de limpieza, extracción y concentración en fase sólida; el Segundo corresponde a la separación, identificación y cuantificación de los compuestos mediante Cromatografía Líquida de Alta Eficiencia (CLAE con derivación poscolumna y detección por fluorescencia. Los resultados de la validación muestran que la metodología es específica, selectiva, precisa y robusta en un rango lineal entre 10 y 750 /xg/L, con límites de detección de 0,8 /xg/L y límites de cuantificación de 2 /ig/L para los dos analitos. Las recuperaciones se encuentran en el orden del 73% para glifosato y del 70% para el AMPA. Además, se muestran los resultados de análisis de aguas tomadas en algunas zonas del país donde se aplica glifosato en diferentes dosis con diferentes propósitos, encontrándose residuos del herbicida y de su metabolito en concentraciones por encima de los valores permitidos en aguas potables para plaguicidas de categoría toxicológica IV, caso del glifosato, de acuerdo con la legislación colombiana

  11. Comparative experimental study on municipal wastewater disinfection with ozone and peracetic acid; Indagine sperimentale comparata sulla disinfezione di acque reflue urbane con ozono e acido peracetico

    Energy Technology Data Exchange (ETDEWEB)

    Andreottola, G.; Bertola, P.; Ziglio, G. [Trento Univ. (Italy). Dip. di Ingegneria Civile Ambientale

    1996-04-01

    The results of a pilot experimental study on the disinfection of treated municipal wastewater to be used in agriculture are presented. A comparative evaluation has been carried out on two parallel pilot-scale disinfection plants using respectively ozone and peracetic acid. After a preliminary sand filtration pilot unit. Both processes showed the capability of meeting the Italian standards for agricultural reuse, but the disinfection process with ozone required much higher doses than the one with peracetic acid, probably because of the higher reactivity of ozone, if compared to peracetic acid with the organic matter present in wastewater. Further research is needed in order to evaluate the efficiency of peracetic acid applied to microorganism different from the bacterial ones and to identify nature and consequences of possible disinfection by products.

  12. PROPAGACIÓN VEGETATIVA DE PLÁTANO Y BANANO CON LA APLICACIÓN DE BENZILAMINOPURINA (6-BAP) Y ACIDO INDOLACETICO (AIA)

    OpenAIRE

    Hayron Fabricio Canchignia Martínez; Gonzalo Rafael Benavides Velasquez; Marjorie Dolores Espinoza Roca; Mercedes Susana Carranza Patiño; Orly Fernando Cevallos Falquez; Silvia Gicela Saucedo Aguiar

    2008-01-01

    En la propagación vegetativa de dos variedades de Banano (Valery y Orito) y una de Plátano (Barraganete), se sometió a diferentes tratamientos hormonales, para evaluar el número de brotes, la concentración 30 mg L-1 de BAP alcanzó el mayor promedio, con 2.36 brotes para todas las variedades. En longitud y diámetro de brotes, la concentración que logró el mayor promedio fue C0, no encontrándose diferencias entre las concentraciones de 6-BAP y AIA. La variedad que presentó la mayor longitud y d...

  13. Evaluation of ultrasonic technique to characterize the concentration of boric acid in liquid medium; Avaliacao de tecnica ultrassonica para medida de concentracao de acido borico em meio liquido

    Energy Technology Data Exchange (ETDEWEB)

    Kohara, Richard Yuzo Ramida

    2015-06-01

    This dissertation is to analyze the viability of using ultrasonic technique to characterize the concentration of boric acid in liquid medium non-invasively, therefore, ultrasonic tests were performed relating different boric acid concentrations with the travel time of the ultrasonic wave, also were evaluated factors able to mask the characterization of these concentrations by ultrasonic technique. The results showed that the ultrasonic technique allows the characterization of boric acid concentrations in liquid medium in very simple terms by the ultrasonic wave travel time, requiring further studies in complex conditions. (author)

  14. Efeito do acido borico sobre a reação de formação da oxima da benzoina

    OpenAIRE

    Dal Magro, Jacir

    1993-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Ciencias Fisicas e Matematicas A reação entre a hidroxilamina e benzoína ocorre em duas etapas: formação de um intermediário de adição e a desidratação deste à oxima. A reação na presença de ácido bórico (0,01M) a pH 8,5 apresenta um aumento no valor de kobs em até l5 vezes. Este valor é maior na presença de ácido fenil bórico, onde a diferença atinge 28 vezes. Tampões que possuem pKas semelhantes não apresentam ne...

  15. Radiological assessment occupational radionuclides in a phosphoric acid plant; Evaluacion radiologica ocupacional y distribucion de radionucleidos en una planta de acido fosforico

    Energy Technology Data Exchange (ETDEWEB)

    Bolivar, J. P.; Garcia-Tenorio, R.

    2008-07-01

    On the frame of a research project devoted to the control of the exposure due to natural radiation in several NORM industries located at the South of Spain, a detailed to the production of phosphoric acid has been performed. In addition, the behaviour along the mentioned process of the different radionuclides involved has been analysed. It has been concluded that the effective dose which can be received by the workers of the plant is clearly below 1 mSv/year. And it has been demonstrated that the main route of occupational exposure corresponds to the external radiation due mainly to the permanent presence of a radioactive contamination source in different zones of the plant. This contamination source is associated to the presence of scales in the inner surfaces of pipes and equipment as well as to the presence of sludges in the phosphoric acid storage tanks, which in both cases contain elevated concentrations of 226{sup R}a. Moreover, the 222{sup R}n concentrations inside the plant do not overpass 100 Bq/m{sup 3}, which not constitutes a radiological problem. (Author) 9 refs.

  16. Electrorremediación de suelos arenosos contaminados por Pb, Cd y As provenientes de residuos mineros, utilizando agua y acido acético como electrolitos

    OpenAIRE

    García Hernández, Laura; Vargas Ramírez, Marissa; Reyes Cruz, Víctor

    2011-01-01

    En el presente trabajo se realizaron estudios potenciostáticos en una celda de electrorremediación experimental, de un suelo real tipo arenoso (93% arena) contaminado por la oxidación residuos mineros proveniente de la zona de Zimapán Hidalgo, se utilizó agua desionizada, CH3COOH y CH3COONH4 0.001 M, ya sea como humectante del suelo o como electrolitos, se aplicó un potencial constante de 20 V durante 24 horas. Al terminar los experimentos se recuperó el suelo, se determinó el pH, observándos...

  17. The dynamics of acetic acid in the anaerobic treatment of abattoir sewage; Dinamica del acido acetico en la depuracion anaerobia de aguas residuales de mataderos

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Borges, E.; Acosta Viana, K. [Universidad Autonoma de Yucatan. Mexico (Mexico)

    1999-05-01

    The purpose of this experiment was to examine the production and consumption of acetic acid during the anaerobic treatment of sewage from a municipal abattoir. The experiment studied a 20-litre UASB reactor under three hydraulic retention time (HRT) conditions-4 days, 2.5 days and 1.6 days-measuring the acetic acid concentration in the reactor in fluent and effluent. The results obtained during the experiment with the three different HRTs are reported. The highest percentages of acetic acid removed ( an average of 44%) were obtained with an HRT of 4 days. The amount of acetic acid removed with and HRT of 2.5 days was 27%. (Author) 18 refs.

  18. Study of the interaction of enzyme Heparanase 1 (HPSE1) active with deoxyribonucleic acids; Estudo de interacao da enzima Heparanase 1 (HPSE 1) ativa com acido desoxirribonucleicos

    Energy Technology Data Exchange (ETDEWEB)

    Cid, Gisele da Silva

    2016-07-01

    The human heparanase 1 (HPSE 1) is a protein with multiple functions and has emerged as a promising therapeutic target in the context of antitumor therapy. This fact is due to its clinical relevance in the tumor development and progression, as determined by their enzymatic ability to degrade heparan sulfate (HS), the main constituent of the extracellular matrix, providing a tumor microenvironment to tumor dissemination. In addition, this protein plays a significant role in the increase of tumor cells migration ionizing radiation dose delivery in radiotherapy from the increase in the expression levels of HPSE1. In order to evaluate in more detail the functions of active HPSE1, it has been proposed to characterize the interaction of human heparanase protein 1 with deoxyribonucleic acids. Our results are original and point to a new function of HPSE1 of the endonuclease type. (author)

  19. Performance of lead-acid batteries. Experimental study and discharge process modelling; Desempenho de baterias chumbo-acido. Estudo experimental e modelamento do processo de descarga

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, G; Bottura, C P [Universidade Estadual de Campinas, SP (Brazil); Oliveira, M G [Universidade Estadual de Campinas, SP (Brazil). Inst. de Quimica

    1985-12-31

    Commercial lead-acid batteries performance when continuously discharge is valued in this work. The model relating battery capacity and discharge current is confirmed through the analysis of experimental results relating voltage to time for various discharge currents. Such model was determined for the tested batteries and can be interpreted in terms of diffusional limitations and plate passivation. (author). 2 figs., 1 tab., 12 refs

  20. The problem of auto-discharge in lead-acid batteries; O problema da auto-descarga em baterias chumbo acido

    Energy Technology Data Exchange (ETDEWEB)

    Avaca, L A; Gonzalez, E R; Tremiliosi Filho, G; Silva, C.C. da; Maezuru, M [Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. de Fisica e Quimica

    1985-12-31

    Storage batteries used together with photovoltaic cells in remote locations must have special characteristics to fit the charge and discharge profiles to which they are submitted. Therefore, to avoid over dimensioning of the photovoltaic cells, the batteries must have particularly low self-discharge characteristics. The problem of self-discharge is directly connected to the degree of technological development in the fabrication of the batteries. The self-discharge of the SLI batteries made locally was measured under standardized conditions and the results were correlated with the kinetics of the electrochemical hydrogen evolution reaction on the lead alloys in acid medium. (author). 7 figs., 4 tabs., 11 refs

  1. The importance of the fatty acids in breast milk and in lacteal formulae; La importancia de los acidos grasos en la leche materna y en las formulas lacteas

    Energy Technology Data Exchange (ETDEWEB)

    Vega, S.; Gutierrez, R.; Radilla, M.; Ramirez, A.; Perez, J. J.; Schettino, B.; Ramirez, M. L.; Ortiz, R.; Fontecha, J.

    2012-11-01

    The best choice for feeding the newborn child is breast milk, and when it is not possible to breast feed a baby, the breast milk is replaced by lacteal formula, which is why numerous studies focus their attention on the analysis of the diverse components of baby formula as well as functions in the breast fed baby. Fatty acids are components of great nutritional importance in the fetus and in the newborn child. Nowadays it is estimated that the fetus, during the last trimester of the gestational period and the newborn child, during the first six months of life, need a great contribution of araquidonic and docosahexaenoic acids, due to the fact that the speed of transformation of the predecessors to the hepatic level are not sufficient to cover the metabolic requirements of these fatty acids and it is the mother who contributes them through placental transport during gestation and her milk during lactation. The Organization of Food and Agriculture (FAO), the World Health Organization (WHO), the European Society of Gastroenterology, Hepato logy and Pediatric Nutrition (ESPGHAN) and the American Academy of Pediatrics recommend that lacteal formula imitate the composition of the breast milk, especially in the fatty polyunsaturated acids (PUFA). (Author) 61 refs.

  2. Production and characterization of an acido-thermophilic, organic solvent stable cellulase from Bacillus sonorensis HSC7 by conversion of lignocellulosic wastes

    Directory of Open Access Journals (Sweden)

    Fatemeh Azadian

    2017-06-01

    Full Text Available The acidophilic and thermophilic cellulase would facilitate the conversion of lignocellulosic biomass to biofuel. In this study, Bacillus sonorensis HSC7 isolated as the best thermophilic cellulose degrading bacterium from Gorooh hot spring. 16S rRNA gene sequencing showed that, this strain closely related to the B. sonorensis. CMCase production was considered under varying environmental parameters. Results showed that, sucrose and (NH42SO4 were obtained as the best carbon and nitrogen sources for CMCase production. B. sonorensis HSC7 produced CMCase during the growth in optimized medium supplemented with agricultural wastes as sole carbon sources. The enzyme was active with optimum temperature of 70 °C and the optimum CMCase activity and stability observed at pH 4.0 and 5.0, respectively. These are characteristics indicating that, this enzyme could be an acidophilic and thermophilic CMCase. Furthermore, the CMCase activity improved by methanol (166%, chloroform (152%, while it was inhibited by DMF (61%. The CMCase activity was enhanced in the presence of Mg+2 (110%, Cu+2 (116%, Triton X-100 (118% and it retained 57% of its activity at 30% NaCl. The compatibility of HSC7 CMCase varied for each laundry detergent, with higher stability being observed in the presence of Taj® and darya®. This enzyme, that is able to work under extreme conditions, has potential applications in various industries.

  3. Canaric acid (3,4-seco-lupane derivative) isolated from propolis of Ceara, BR; Acido canarico (3,4-seco derivado do lupano) em propolis do Ceara

    Energy Technology Data Exchange (ETDEWEB)

    Albuquerque, Irineu L. de; Alves, Leonardo A.; Lemos, Telma L.G.; Monte, Francisco J.Q. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica]. E-mail: tlemos@dqoi.ufc.br; Braz-Filho, Raimundo [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacazes, RJ (Brazil). Centro de Ciencias e Tecnologia. Setor de Produtos Naturais

    2007-07-15

    Phytochemical investigation of a propolis sample from Alto Santo - Ceara, Brazil, allowed identification of triterpenes (lupeol, lupenone, germanicone, Canaric acid) and flavonoids (quercetin, kaempferol and acacetin), which were identified by spectroscopic data (IR, MS, and NMR, including 2D techniques). This is the first report of Canaric acid in propolis. Propolis extract and flavonoids showed antioxidant activity using a DPPH radical scavenging assay. (author)

  4. Radioprotection potential of the ascorbic acid on the carrageenan used as food additive; Potencial radioprotetor do acido ascorbico sobre a carragenana utilizada como aditivo alimenticio

    Energy Technology Data Exchange (ETDEWEB)

    Aliste, Antonio Joao; Mastro, Nelida Lucia del [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: ajaliste@net.ipen.br; nlmastro@net.ipen.br

    2002-07-01

    Carrageenans are a group of natural carbohydrates that are present in the structure of certain varieties of red algae (Rhodophyceae). They are used in emulsions, for syneresis control and to grow up, to promote adhesiveness and dispersion. In the industry of foods they can be used for instance, as thickness and gelling agents, alone or together with other additives. The processing of foods by radiation is increasing considerably, because the efficiency of the process in the industrial decontamination of products. The objective of this work was to study the action of the ascorbic acid as potential radioprotector of the carrageenan against {sup 60} Co gamma radiation effects, using the viscosity as parameter. Samples of commercial carrageenan dissolved at 1,0% were irradiated in the presence or not of ascorbic acid, with doses of 0.0 kGy; 1.0 kGy; 2.5 kGy; 5.0 kGy and 10.0 kGy. After the irradiation the relationships viscosity/dose were established for the temperature of 60 deg C. For the dose of 10.0 kGy a better protecting effect of the ascorbic acid on the carrageenan was seen. The implications of the use of this antioxidant is discussed as a form of minimizing the effect of the radiation in irradiated foods. (author)

  5. Estudio experimental para la obtención de dióxido de titanio a partir de ilmenita vía acido clorhídrico

    OpenAIRE

    Pedro Hernández; Andrés Hurtado; Luis Peñaloza; Jacqueline Romero

    2010-01-01

    Una ilmenita colombiana con un tamaño de partícula que pasa malla 100, se lixivió con soluciones de ácido clorhídrico cuyas concentraciones oscilaron entre 17% y el 41% (p/v), en relaciones estequiométricas de 1.0 a 2.5 veces, temperaturas entre 75°C y lOrC y tiempos de 1 a 5 horas. La mezcla resultante se filtró obteniéndose un licor que contenía entre 70% y 80% del TiO^ presente en la ilmenita, el cual se hidrolizó térmicamente. El producto final fue obtenido por calcinación a 900°C y po...

  6. Degradation of polylactic acid (Pla) at different doses of gamma radiation; Degradacion del acido polilactico (PLA) a diferentes dosis de radiacion gamma

    Energy Technology Data Exchange (ETDEWEB)

    Castillo R, Y.

    2015-07-01

    The excessive use of polymers such as polyethylene (PET), polystyrene (Ps) and recently the polylactic acid (Pla) that take more than 20 years to degrade, have caused great pollution in the environment. In this study the effects of gamma radiation in the Pla to different doses were studied, in order to reduce the degradation time of this polymer. The changes in physico-chemical structure of Pla during radiation were studied by thermo-gravimetric/Mass analysis; differential scanning calorimetry; scanning electron microscopy; X-ray dispersive analysis; infrared spectroscopy; X-ray diffraction and mechanical tests of hardness, elasticity and deformation. With scanning electron microscopy, the morphology of the Pla surface unirradiated was observed, in which an apparently smooth surface was observed, after changes that had the Pla when irradiated also was observed, where the effects of radiation were observed in form of scratch, agglomeration and small fractures. By X-ray dispersive analysis was determined and verified the elemental chemical composition of the Pla; as expected the tests showed only carbon, oxygen and hydrogen. With thermo-gravimetric/Mass analysis the decomposition temperatures of Pla were determined, identifying that the degradation compounds are CO, CO{sub 2} and CH{sub 4}. With infrared spectrometry the major peaks of Pla were observed before and after being irradiated with increasing of radiation dose the intensity of the bands decreased. Also by X-ray diffraction was observed that the polymer is an amorphous material. The mechanical tests indicate that the values of each of the tests decrease significantly with increasing the radiation dose. (Author)

  7. Use of chemical pre-treatment based chromic acid; Uso de pre-tratamento quimico a base de acido cromico. Beneficios versus desvantagens

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Paulo Henrique Leite [TENARIS CONFAB S.A., Pindamonhangaba, SP (Brazil); Bibiano, Paulo de Tarso [SOCO-RIL do Brasil S.A., Pindamonhangaba, SP (Brazil); Koebsch, Andre; Mollica, Eduardo de Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    In this work were going compared the polyethylene and FBE coatings performances in triple layer for tubes done with and without the presence of the pre-treatment chemist with chromic acid of the tube surface. The performance test chosen for accomplishes the comparison was the cathodic disbondment and hot water soak, for being this the test that has objective to improve the performance with the chromic acid application. The obtained results were going extracted of a factory database of TENARIS CONFAB S.A. in Pindamonhangaba - Sao Paulo. The adopted technical specification like reference for the tried coatings belonged to PETROBRAS S.A. Were compared also tests results of jobs using chromate and jobs that were not used pre-treatment. (author)

  8. PRODUCCIÓN DE ACIDO CLAVULÁNICO POR FERMENTACIÓN DE Streptomyces clavuligerus: EVALUACIÓN DE DIFERENTES MEDIOS DE CULTIVO Y MODELADO MATEMÁTICO

    Directory of Open Access Journals (Sweden)

    CLAUDIA PATRICIA SANCHEZ HENAO

    2012-01-01

    Full Text Available El ácido clavulánico (AC es un antibiótico b-lactámico con una potente capacidad inhibidora de la actividad b-lactamasa. En el presente trabajo se evaluaron cuatro medios de cultivo reportados en la bibliografía y uno propuesto por los autores, para la producción de AC. Se evaluó también la concentración de glicerol adecuada para el medio seleccionado y con base en los resultados obtenidos se realizó una evaluación de la producción de AC en un biorreactor de laboratorio. Se propuso un modelo matemático y se evaluó su ajuste a los resultados experimentales. Se observó que los medios complejos con presencia de una mezcla de aminoácidos libres, son adecuados para la producción de AC. El glicerol presentó un valor óptimo frente a la producción de AC en 50 g.L-1 y se observó el efecto inhibitorio a concentraciones de 100 g.L-1. Con el medio complejo y 50 g.L-1 de glicerol, la concentración de AC alcanzada fue de 994 mg.L-1. El modelo matemático propuesto que incluye una cinética tipo Contois para la biomasa y una cinética de formación de producto parcialmente asociado al crecimiento, presentan un ajuste significativo con un 95% de nivel de confianza.

  9. The influence of acid and base waste on the activated sludge system; Influencia de vertidos acidos y basicos sobre el sistema de fangos activados

    Energy Technology Data Exchange (ETDEWEB)

    Coello Oviedo, M. D.; Sales Marquez, D.; Quiroga Alonso, J. M.

    2003-07-01

    A study has been made of the effect of acid and base waste on the microorganisms in the activated sludge reactor. This effect was monitored using the classical control parameters (SVS and the percentage of organic matter eliminated) and by measuring the activity of the microorganisms (specific breathing rate and percentage of active cells). The results obtained indicate that the macrobiotic is affected at the extremes of the pH range (pH 4,5 and pH 10.5). The system's performance worsens and therefore the quality of the effluent fails to comply with European Directive 91/271/EEC. In the tests carried out with pH 6 and 9, the microorganisms activity declined at first,but the system eventually recovered and returned to levels of activity similar to those prior to the test. It was also found that deviations of the supply towards acid pH had a greater negative effect on the reactor than identical deviations towards baseness. (Author) 12 refs.

  10. Development of starch biofilms using different carboxylic acids as plasticizers; Desenvolvimento de biofilmes de amido utilizando como plastificantes diferentes acidos carboxilicos

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, L.C.; Miranda, C.S.; Santos, W.J. dos; Goncalves, A.P.B.; Oliveira, J.C.; Jose, N.M., E-mail: uanaconceicaocruz@gmail.com [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Programa de Pos-Graduacao em Engenharia Quimica. Grupo de Energia e Ciencias dos Materiais

    2014-07-01

    Biodegradable films have become a widely exploited issue among scientists because of their positive environmental impact, besides their potential to promote better food conservation and an increase in shelf life. Starch has been studied in this field due to its availability, low cost and biodegradability. However, starch films tend to be brittle and they need addition of a plasticizer to enable their usage. In this work, starch films were synthesized with different carboxylic acids as plasticizers, aiming to observe the effect of the acids chain size in the final films properties. The acids used were: oxalic, succinic and adipic. The materials were produced by casting and characterized by DSC, TG, DRX e FTIR. It was observed that the acids chain size influenced on the thermal and structural properties of the films. (author)

  11. COMPOSICION QUIMICA Y CONCENTRACION DE PRECURSORES DE ACIDO RUMENICO Y VACCENICO EN FORRAJES ALTERNATIVOS PARA LA ALIMENTACION DE RUMIANTES EN ECOSISTEMAS ARIDOS

    Directory of Open Access Journals (Sweden)

    Ricardo Ortega Pérez

    2009-07-01

    Full Text Available Se determinó el valor nutrimental de alfalfa henificada (AH, dos genotipos de fríjol yorimón [IT90K-277-2 (FYG18 y Sesenteño (FYG25], un clon de pasto taiwán (PT, un cultivar local de nopal en dos presentaciones, pencas tiernas de 15 días de edad o ";;;nopalitos";;; (NT y pencas maduras (NM de 60 días de edad y germinado de semillas de maíz (GM del genotipo ASGROW 7573. Se cuantificó el contenido de materia seca (MS, proteína cruda (PC, lípidos totales (LT, cenizas (C, fibra cruda (FC y energía bruta (EB, así como la concentración de ácido linoleico (LA, ácido α-linolénico (ALA, ácidos grasos poliinsaturados (PUFA y ácidos grasos n-3. Los resultados revelan que los genotipos de frijol yorimón FYG25 y FYG18, mostraron el mayor contenido de PC. Respecto a la concentración de LT, el genotipo de yorimón FYG25 mostró la mayor cantidad seguido del FYG18 y AH. Los forrajes verdes de frijol yorimón (FYG25 y FYG18, así como el pasto Taiwán tuvieron el contenido mayor de ácido α-linolénico. Las semillas de germinado de maíz mostraron los contenidos mayores de ácido linolénico seguido del nopal tierno. Ambos ácidos grasos poliinsaturados (ALA y LA son precursores del ácido ruménico y del ácido vaccénico en rumiantes. Por lo tanto, el uso de estos forrajes verdes en la alimentación de rumiantes es una alternativa que podría modificar las proporciones de ácido grasos en la leche y la carne con el propósito de incrementar los PUFA, específicamente el ácido ruménico así como el ácido vaccénico.

  12. Evolution of biochemical parameters in irradiated fishes: Serum proteins and intestinal nucleic acids; Evolucion de parametros bioquimicos en peces irradiados: Proteinas en suero y acidos nucleicos en intestino

    Energy Technology Data Exchange (ETDEWEB)

    Garces, F; Andres, P; Davila, C A

    1976-07-01

    In sublethal gamma-irradiated C. auratus, a sudden decrease of total serum protein concentration and a preferential descent of the low molecular weight gamma-globulin fraction have been observed. These effects are transient and after different latent periods dependent on doses, normal values are recovered, A temporal failure of a vascular permeability regulation system is probably implied. The DMA depolymerization. observed in the intestine indicates the action of radio-induced DNA degradation mechanisms since this effect is independent on doses. (Author) 29 refs.

  13. The impact of heavy and acid oil production in PETROBRAS downstream area; A influencia dos petroleos pesados e acidos no parque de refino da PETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Perisse, Juarez Barbosa; Oddone, Maria Regina Rezende; Bela, Donizeti Aurelio Silva [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    PETROBRAS is facing a great challenge processing heavy and acid oils. The low API of the more recent offshore discoveries leads to an increase in vacuum residue yields which is one important component of the fuel oil's 'pool'. The fuel oil demand is expected to decrease along the next years due to natural gas substitution and to environmental issues, generating exceeding fuel oil exportation at low prices. This paper will discuss World and PETROBRAS technological choices to process these oils meeting the required future demand and quality. A comparison among various residue conversion technologies is also presented in this paper focused on the reduction of fuel oil production and on the improvement of diesel / gasoline rate. Another important issue that will be discussed in this paper is related to the different solutions implemented all over the world to deal with the crude acidity problem and the solutions adopted by PETROBRAS. (author)

  14. Polyesters production from the mixture of phthalic acid, terephthalic and glycerol; Producao de poliesteres a partir da mistura de acido ftalico, tereftalico e glicerol

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, A.L.S.; Oliveira, J.C.; Miranda, C.S.; Boaventura, J.S.; Jose, N.M., E-mail: adrianaequfba@gmail.co [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais; Carvalho, R.F. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Escola Politecnica. Curso de Mestrado em Engenharia Ambiental Urbana

    2010-07-01

    Glycerin, a byproduct of biodiesel is currently an environmental and economic problem for producers of this renewable fuel in Brazil and in others parts of the world. In order to offer new proposals for recovery, it is used for the manufacture of polyesters used in applications in diverse areas such as construction and automobile industry. This work reports the production of polymer from the mixture of terephthalic and phthalic acid in three different proportions. The polyesters showed good thermal stability, analyzed by TGA and DSC, with an increase proportional to the terephthalic acid content. The X-ray diffraction patterns show that the samples are semi crystalline polymers. The micrographs indicated the presence of a smoother surface in the polyester that has a larger amount of phthalic acid, as reported in the literature. Therefore, the materials showed good thermal properties and morphological characteristics, so it consists in a new alternative to use glycerin. (author)

  15. Removing volatile fatty acids during the anaerobic treatment of pig sewage; Remocion de acidos grasos volatiles durante el tratamiento anaerobio de aguas residuales porcicolas

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Borges, E.; Mendez Novelo, R.; Magana Pietra, A.; Partinez Pereda, P.; Fernandez Villagomez, G. [Facultad de Ingenieria, Universidad Atuonoma de Yucatan. Mexico (Mexico)

    1997-06-01

    This study examined the behaviour of a hybrid anaerobic digester in treating pig farm sewage. The experimental model consisted of a 208-litre UASB reactor at the bottom and a 195-litre high-rate sedimentator at the top. The digester was installed on a pig farm and its efficiency in removing volatile (acetic and propionic) fatty acids (VFA) was determined with hydraulic retention time (HTR) as the critical parameter for evaluating the anaerobic system`s performance. The results obtained with the five different HRTs used during the experiment are reported. The highest removal rates were obtained with an HRT of 2.8 days: 98% in the UASB, 28% in the sedimentator and 98% in the digester as a whole. An HRT of 1 day gave VFA removal rates of 40%, 12% and 50% in the UASB reactor sedimentator and digest respectively. (Author) 16 refs.

  16. PROCESO ENZIMATICO PARA LA PRODUCCION DE METIL ESTERES DE ACIDOS GRASOS UTILIZANDO ACEITES RESIDUALES DE FRITURA EN MEZCLA CON ACEITE DE RAPS COMO MATERIA PRIMA

    OpenAIRE

    AZOCAR ULLOA; LAURA HAYDEE; AZOCAR ULLOA; LAURA HAYDEE

    2010-01-01

    Los procesos catalizados por lipasas han sido ampliamente investigados como alternativa para la producción de metil ésteres de ácidos grasos (fatty acid methyl ester, FAME) o biodiesel. El interés en este proceso radica en que a diferencia de los procesos convencionales catalizados con sales alcalinas, los procesos catalizados con lipasas permiten el uso de materias primas alternativas y de menor costo, tales como el aceite residual de fritura (waste frying oil, WFO). Pese a los l...

  17. Determinação da Fe 2 + e acido ascorbico e suas interações em sistemas modelo e natural (suco de laranja concentrado)

    OpenAIRE

    Lucia Helena Seron

    1991-01-01

    Resumo: Com o objetivo de conhecer as interações entre ácido ascórbico e Fe, a ser adicionado a suco de laranja concentrado, estudou-se a determinação desses compostos em soluções individuais e juntos na mesma solução, variando-se as condições do meio para avaliar suas interferências. As determinações de ácido ascórbico e Fe foram feitas pelo método da redução de íons cúpricos com cuproína enquanto somente os íons ferrosos foram determinados usando orto-fenantrolina. O sistema de uma fase nas...

  18. Estudio experimental para la obtención de dióxido de titanio a partir de ilmenita vía acido clorhídrico

    Directory of Open Access Journals (Sweden)

    Pedro Hernández

    2010-07-01

    Full Text Available Una ilmenita colombiana con un tamaño de partícula que pasa malla 100, se lixivió con soluciones de ácido clorhídrico cuyas concentraciones oscilaron entre 17% y el 41% (p/v, en relaciones estequiométricas de 1.0 a 2.5 veces, temperaturas entre 75°C y lOrC y tiempos de 1 a 5 horas. La mezcla resultante se filtró obteniéndose un licor que contenía entre 70% y 80% del TiO^ presente en la ilmenita, el cual se hidrolizó térmicamente. El producto final fue obtenido por calcinación a 900°C y posee un contenido de TiO^ mayor del 97%.

  19. Electrodialytic separation of Cu(II) and As(V) in acidic electrolytes; Separacion electrodialitica de Cu(II) y As(V) en electrolitos acidos

    Energy Technology Data Exchange (ETDEWEB)

    Ibanez, J. P.; Ipinza, J.; Cifuentes, L.

    2007-07-01

    The separation of copper and arsenic from acidic electrolytes by electrodialysis was investigated at room temperature. the effect of current density and pH was studied in a batch cell during 3 hours. The kinetic parameters showed that Cu(II) transport rate was 0.75 mol/m''2/h and the As(V) transport rate was 0.002 mol/m''2/h. An efficient separation between Cu(II) and As(V) was achieved; Generating a concentrated solution of copper with no arsenic, which was obtained independently of the electrolyte acidity and current density used. The effect of the arsenic speciation with pH is discussed as well. (Author) 23 refs.

  20. Synthesis and characterization of polypropylene/graphite nano composite preparation for in situ polymerization; Sintese e caracterizacao de nanocompositos polipropileno/grafite obtidos pela polimerizacao in situ

    Energy Technology Data Exchange (ETDEWEB)

    Montagna, L.S.; Fim, F. de C.; Galland, G.B. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica; Basso, N.R.S., E-mail: nrbass@pucrs.b [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil)

    2010-07-01

    This paper presents the synthesis of polypropylene/graphite nanocomposites through in situ polymerization, using the metallocene catalyst C{sub 20}H{sub 16}Cl{sub 2}Zr (dichloro(rac-ethylenebis(indenyl))zircon(IV)). The graphite nanosheets in nano dimensions were added to the polymer matrix in percentages of 0.6;1.0;4.2;4.8 and 6.0% (w/w). The TEM images indicated that the thickness of graphite nanosheets ranged from 4 to 60 nm and by means of XRD analysis it was observed that the physical and chemical treatment did not destroyed the graphite layers. The presence of nanosheets did not decrease the catalytic activity of the nanocomposites. TEM images and XRD analysis of nanocomposites showed a good dispersion of the graphite nanosheets in the polypropylene matrix. (author)

  1. Florescimento e produção de maracujazeiro-amarelo obtido por enxertia hipocotiledonar em Jaboticabal-SP e Araguari-MG

    Directory of Open Access Journals (Sweden)

    Geraldo Costa Nogueira Filho

    2011-03-01

    Full Text Available O trabalho foi realizado no ripado e na área de Fruticultura do Departamento de Produção Vegetal da Faculdade de Ciências Agrárias e Veterinárias, Universidade Estadual Paulista (FCAV/UNESP, em Jaboticabal-SP, e em área de pequeno produtor fornecedor da Maguari (Kraft Foods do Brasil em Araguari-MG, tendo por objetivo avaliar o desenvolvimento de maracujazeiro-amarelo enxertado por enxertia hipocotiledonar, sobre seis espécies de Passifloraceas. Foram utilizados sete tratamentos, sendo seis tratamentos com as espécies: P. edulis f. flavicarpa, P. caerulea, P. alata, P. gibertii, P. coccinea, P. cincinnata e um tratamento com pé-franco de P. edulis f. flavicarpa. Para todos os tratamentos, a variedade-copa utilizada foi o maracujazeiro-amarelo 'FB 200'. O delineamento experimental utilizado foi o de blocos ao acaso, com três repetições. A parcela foi constituída de uma linha de quatro plantas (20m lineares. A condução foi realizada conforme os tratos culturais recomendados para a cultura. As características avaliadas foram florescimento, produção, número e peso médio de frutos. Em Jaboticabal-SP, o pé-franco apresentou melhor desenvolvimento e maior produção que as plantas enxertadas. Em Araguari-MG, P. edulis f. flavicarpa, P. caerulea e pé-franco apresentaram melhor produção. Não houve diferença significativa no número de frutos, e o P. alata diminuiu, em relação aos outros porta-enxertos, o peso dos frutos.

  2. Tecnologia da informação para o gerenciamento do conhecimento obtido das bases de dados de um organização

    OpenAIRE

    Bernardes Neto, João

    2001-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Produção. Nós estamos observando uma nova era inicializando, que podemos chamar de era do conhecimento. Com a lição da qualidade e reengenharia firmemente embutida no dia a dia das organizações, a atenção agora está na produção de produtos inovadores e personalizados, pois a primeira palavra para produção é inovação; atualmente os serviços e negócios também exigem...

  3. Valores de energia metabolizável de alguns alimentos obtidos com aves de diferentes idades Metabolizable energy values of feedstuffs obtained from poultry at different ages

    Directory of Open Access Journals (Sweden)

    Heloisa Helena de Carvalho Mello

    2009-05-01

    Full Text Available Foram realizados quatro ensaios de metabolismo com a finalidade de determinar a energia metabolizável aparente (EMA e a energia metabolizável aparente corrigida (EMAn de dez alimentos em aves em diversas idades. Os alimentos testados foram: milho, farelo de soja, sorgo, farelo de trigo, farelo de arroz integral, duas farinhas de penas, duas farinhas de vísceras e plasma sangüíneo. Utilizou-se o método de coleta total de excretas, em delineamento experimental inteiramente casualizado, com 11 tratamentos (dez alimentos e uma ração-referência e seis repetições. No primeiro ensaio, foram utilizados 528 pintos de corte machos de 10 a 17 dias de idade, totalizando oito aves por repetição; no segundo ensaio, 396 frangos de corte machos de 26 a 33 dias de idade, com seis aves por repetição; no terceiro ensaio, 264 frangos de corte machos de 40 a 47 dias de idade, com quatro aves por repetição; e, no quarto ensaio, 132 galos, com duas aves por repetição. A idade das aves influenciou os valores de EMA e EMAn do farelo de soja, do sorgo, do farelo de arroz integral, das farinhas de penas e do plasma sangüíneo, enquanto, para o farelo de trigo, teve efeito apenas sobre a EMAn.Four assays were carried out to determine the apparent metabolizable energy (AME and the corrected apparent nitrogen metabolizable energy (AMEn of ten feeds for poultry at different poultry ages. The feeds studied were: corn grain, soybean meal, ground sorghum, wheat bran, integral rice bran, two kinds of feather meal, two kinds of poultry viscera meal and spray-dried plasma. The method of total excreta collection was used to determine the AME and AMEn values. The broiler chicks were distributed on a completely randomized experimental design, with 11 treatments, six replications, with different number of animals by replication according to the assay. In the first assay, 528 male broiler chicks in the period from 10 to 17 days of age were used, with eight animals per replication. In the second assay, 396 male broiler chicks in the period from 26 to 33 days of age were used, with six animals per replication. In the third assay, 264 male broiler chicks in the period from 40 to 47 days of age were used, with four animals per replication. In the fourth assay, 132 roosters were used, with two animals per replicate. There was an effect of age on the AME and AMEn values of the following feeds: soybean meal, ground sorghum, integral rice bran, two kinds of feather meal and spray-dried plasma, where the oldest broilers provided the highest AME and AMEn values. Wheat bran was affected by age only for the AMEn values.

  4. MINGAU SEMI-INSTANTÂNEO DE CANJIQUINHA-SOJA (80:20 OBTIDO PELO PROCESSO DE EXTRUSÃO

    Directory of Open Access Journals (Sweden)

    SIN-HUEI WANG

    2009-07-01

    Full Text Available

    Com o objetivo de obter um mingau semi-instantâneo para nutrição infantil, foi extrusada uma mistura de canjiquinha e soja (80:20 usando-se extrusor Brabender de dupla rosca com velocidade de alimentação constante de 20,8 kg/h, velocidade da rotação de parafuso de 100 rpm e diâmetro de matriz de 5 mm. Os perfis da temperatura de barril (TB foram: zona 1, 60°C (constante, zona 2, 90°C (constante, zona 3, 90, 110, 130 ou 150°C, e zona 4 (matriz 110, 130 ou 150°C. Os resultados mostraram que o aumento da TB na zona 3 causou um aumento na viscosidade inicial (VI, solubilidade de nitrogênio (SN e dispersibilidade de proteína (DP, porém uma diminuição na temperatura de viscosidade máxima (tºVmáx, viscosidade máxima (Vmáx , viscosidade mínima (Vmín e viscosidade final (VF das farinhas extrusadas de canjiquinha-soja (80:20. O aumento da TB na zona 4 resultou num aumento na VI, Vmáx, Vmín, SN e DP, porém numa diminuição na tºVmáx e VF. Os mingaus submetidos anteriormente às TBs em 130-130 e 130-150ºC nas zonas 3 e 4, respectivamente, apresentaram melhor aparência, consistência e sabor, sendo igualmente preferidos pelos consumidores. Não houve atividade do inibidor de tripsina nas farinhas extrusadas estudadas.

  5. Desenvolvimento e caracterização de filmes biodegradáveis obtidos de amido e de farinha de arroz

    OpenAIRE

    Dias, Amanda Borba

    2008-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Alimentos. O desenvolvimento de polímeros biodegradáveis a partir de recursos renováveis, tem se apresentado como uma alternativa para a redução do impacto ambiental provocado pelos polímeros derivados do petróleo. O arroz é um cereal encontrado em larga escala no sul do Brasil. Poucos trabalhos na literatura citam a produção de filmes a partir de amido de arroz e...

  6. PRODUÇÃO E AVALIAÇÃO DE CARVÕES ATIVADOS OBTIDOS EM DIFERENTES FASES DE ESTABILIZAÇÃO DO LODO DE ESGOTO

    Directory of Open Access Journals (Sweden)

    Glaydson Simões dos Reis

    2015-01-01

    Full Text Available O aumento exponencial na produção de lodo de esgoto, decorrente da melhoria dossistemas de tratamento sanitário em grandes centro urbanos, pode representar um problemaambiental se este não for disposto adequadamente. Converter lodo de esgoto em adsorventesatravés da pirólise tem sido proposto desde 1971 como alternativa a destinação final desteresíduo. Como alternativa para disposição do excesso de lodo que é retirado do reator UASBna Estação de Tratamento de Esgoto Subaé, Feira de Santana, Bahia, a proposta deste trabalhofoi obter carvão ativado em diferentes fases de estabilização do lodo de esgoto e avaliar suacapacidade de adsorção na remoção do azul de metileno em solução aquosa. As propriedadesdo lodo como sólidos totais e voláteis totais, carbono orgânico, nitrogênio, foramdeterminadas seguindo recomendações do Standard Methods APHA. As amostras de lodoforam pirolisadas a 450°C sob atmosfera inerte e o carvão ativado produzido foi caracterizadopor CHN, adsorção de nitrogênio e ensaios de adsorção. Pelas análises físico-químicas, o lodode esgoto apresentou baixos teores de carbono e nutrientes, independentemente do tempo deretenção no leito de secagem, quando comparados a típicos Iodos de sistemas anaeróbios. Osespectros de infravermelho confirmam a presença de grande quantidade de silicatosdecorrente da baixa eficiência da ETE-Subaé. Os ensaios de adsorção, usando o azul demetileno como adsorvato, mostraram que estes carvões são adsorventes potenciais pararemoção de corantes em efluentes líquidos. As isotermas de adsorção foram estudadas e osresultados foram ajustados pelos modelos de Langmuir e Freundlich. O modelo de Langmuirdescreveu melhor o processo de adsorção. Os resultados da adsorção, grau de enriquecimentode carbono e a razão molar N/C, indicaram que a melhor amostra para preparar carvão ativadoda ETE-Subaé é o lodo LES08, àquela que permaneceu mais tempo no leito de secagem.

  7. Desempenho de bovinos simulado pelo modelo Pampa Corte e obtido por experimentação Animal performance simulated by Pampa Corte model with experimental records

    Directory of Open Access Journals (Sweden)

    Naíme de Barcellos Trevisan

    2009-02-01

    Full Text Available Este trabalho tem como objetivo verificar a confiabilidade do Modelo Pampa Corte na predição de desempenho de bovinos de corte, em sistemas de pastejo. Para tanto, foram confrontados os valores preditos pelo modelo com dados disponíveis na literatura. Foram verificados coeficientes de correlação acima de 90% entre os dados reais e os simulados em todas as alternativas testadas. O banco de dados do Modelo precisa ser ampliado em termos de alternativas de produtividade das forrageiras, em diferentes condições climáticas. Os parâmetros qualitativos degradabilidade da proteína bruta e fibra em detergente neutro da consorciação aveia preta e azevém necessitam ainda ser pesquisados, assim como o desempenho de animais em pastagens singulares de aveia ou azevém.This study had the objective to evaluate Pampa Corte Model’s reliability in predicting beef cattle performance in grazing systems. For this purpose, model’s predicted values were compared to available data base of published papers. Correlation coefficients above 90 % were obtained between simulated and real data in all tested alternatives. Model’s data base should be enlarged by forage productivity data in different climatic conditions. Mixtures of Italian ryegrass and oat need more studies to obtain qualitative parameters (crude protein degradability and neutral detergent fiber, as well, animal performance in the single pastures of oat or Italian ryegrass.

  8. Valores de referência para macronutrientes em eucalipto obtidos pelos métodos DRIS e chance matemática

    Directory of Open Access Journals (Sweden)

    P. G. S. Wadt

    1998-12-01

    Full Text Available Informações de 1.213 árvores de plantios comerciais foram obtidas, entre os anos de 1988 a 1994, de híbridos de Eucalyptus grandis x E. urophylla, da Aracruz Celulose S.A., cultivados no estado do Espírito Santo, Brasil. Os resultados da produtividade e concentração dos macronutrientes em quatro órgãos das árvores foram utilizados na obtenção dos valores de referência para a concentração dos nutrientes, pelos métodos da Chance Matemática e do DRIS. Empregou-se, no cálculo dos índices DRIS, a fórmula de Jones (1981, a divisão da população-base em estratos de idade e a seleção das relações entre os nutrientes pelo teste F. O nível crítico dos nutrientes foi atingido pelo DRIS por meio de dois critérios: pela concentração média dos nutrientes nos talhões nutricionalmente balanceados e produtivos (NCO e pelo critério gráfico (NCG. O primeiro critério mostrou-se mais promissor, inclusive em relação ao método da Chance Matemática, o qual foi adequado principalmente para a determinação de faixa ótima que poderia ser adotada como referência para o limite inferior e o superior de árvores com níveis adequados dos nutrientes.

  9. Color formation monitoring of extruded melt mixed PP/MMT nanocomposite;Analise colorimetrica de nanocompositos PP/MMT obtidos via extrusao

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Kelen C. dos; Bertolino, Marcelo K. [Universidade Federal de Sao Carlos (PPGCEM/UFSCar), Sao Carlos, SP (Brazil). Programa de Pos-graduacao em Ciencia e Engenharia de Materiais; Canevarolo, Sebastiao V., E-mail: caneva@power.ufscar.b [Universidade Federal de Sao Carlos (UFSCar), Sao Carlos, SP (Brazil)

    2009-07-01

    This work advances the use of colorimeter technique to analyze the desegregation of the MMT clay tactoids during the preparation of PP/MMT nanocomposites via polymer melt compounding. X-ray diffraction and the light extinction level (turbidity) measured by the intensity of the detector's signal were used to monitoring platelet exfoliation. On tactoids exfoliation their size are reduced below the minimum particle size to produce light extinction (turbidity) and so the signal intensity reduces as the nano size composite is formed, the luminosity of nanocomposite increased as expected. The color formation was brown, yellow and green and it depends of the organoclay type. (author)

  10. Comportamento do NDVI obtido por sensor ótico ativo em cereais Behavior of NDVI obtained from an active optical sensor in cereals

    Directory of Open Access Journals (Sweden)

    Fabrício Pinheiro Povh

    2008-08-01

    Full Text Available O objetivo deste trabalho foi avaliar, com um sensor ótico ativo, o comportamento do índice de vegetação por diferença normalizada (NDVI - "normalized difference vegetation index", nas culturas de trigo, triticale, cevada e milho. Cinco experimentos foram conduzidos no Paraná e São Paulo, com variação de classes de solo, doses e fontes de N, e variedades de trigo. As seguintes variáveis foram avaliadas: NDVI, teor de N foliar, matéria seca e produtividade das culturas. Análises de regressões foram realizadas entre as doses de N aplicadas e NDVI, teor de N foliar, matéria seca e produtividade. Análises de correlação entre as variáveis foram realizadas. O trigo, triticale e cevada apresentaram resposta às aplicações de doses crescentes de N, pelo aumento nas leituras do NDVI, no teor de N foliar e na produtividade. Medido pelo sensor ótico ativo utilizado, o NDVI apresenta alto potencial para manejo do N nas culturas do trigo, triticale e cevada, e baixo potencial para a cultura do milho. Há interferência das variedades de trigo nas leituras do sensor ótico ativo.The objective of this work was to evaluate the behavior of the normalized difference vegetation index (NDVI, with an active optical sensor, in wheat, triticale, barley and corn crops. Experiments were conducted in Paraná and São Paulo, comparing different soil classes, N rates and sources, and wheat varieties. The following variables were determined: NDVI, N foliar content, dry mass and crop yield. Regression analyses were performed between NDVI and applied N rates, N foliar content, dry mass and yield. Correlation analyses among the variables were performed. Wheat, triticale and barley crops showed response to increasing N rates by the increase in the NDVI readings, to N foliar content and to yield. Measured by the used active optical sensor the NDVI shows high potential for N management wheat, triticale and barley crops, and low potential for corn crops. There is interference of wheat varieties in the active optical sensor's readings.

  11. Sintering study of NiO-YSZ composite obtained by coprecipitation route; Estudo de sinterabilidade do composito de NiO-YSZ obtido pela rota de coprecipitacao

    Energy Technology Data Exchange (ETDEWEB)

    Yoshito, W K; Resitivo, T A.G.; Ussui, V; Lazar, D R.R.; Paschoal, J O.A., [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais

    2009-07-01

    NiO-YSZ composite is a widely used anode material for solid oxide fuel cell. The main purpose of the present work was the evaluation of the appropriate conditions of ceramic processing, by sintering behavior study of NiO-YSZ pressed powders, synthesized by hydroxide coprecipitation route. Using the empirical rate equation developed by Makipirtti-Meng, it was analyzed shrinkage rate in the temperature ranges of 900-1400 deg C as function of time. The powders were characterized by X-ray diffraction, scanning electron microscopy, gas adsorption, laser diffraction and helium picnometry. The microstructural characterization of the samples was evaluated by X-ray diffraction, scanning electron microscopy and relative density by the Archimedes method. It was found that activation energy value is 48,3 kJ.mol{sup -1} in the temperature range of 900-950 deg C and 604,83 kJ.mol{sup -1} for 1000-1200 deg C. These values correspond to the change that occurs in the microstructure during the heat treatment process. The sintering process was evaluated by the dilatometry date treatment. (author)

  12. Sintering evaluation of spinel MA nanostructured obtained via synthesis of combustion in solution; Avaliacao da sinterizacao de espinelio MA nanoestruturado obtido via combustao em solucao

    Energy Technology Data Exchange (ETDEWEB)

    Vitor, P.A.M.; Braganca, S.R.; Bergmann, C.P., E-mail: pedroaugusto89@hotmail.com [Universidade Federal do Rio Grande do Sul (LACER/UFRGS), Porto Alegre, RS (Brazil). Laboratorio de Materiais Ceramicos

    2016-07-01

    Specimens were shaped from powders of spinel MA (MgAl2O4) obtained via synthesis combustion in solution (SCS) from the trio chemical precursor aluminum nitrate, magnesium nitrate and sucrose in water, and then sintered at different temperatures between 1350 and 1650 ° C. Were evaluated the physical properties (density, porosity, water absorption and linear shrinkage), mechanical (flexural 4 points), and the microstructures (SEM) as a function of sintering temperature. The densification increased with growing the value of the sintering temperature, wherein the temperature to 1650 ° C had the highest flexural strength and higher elastic modulus: 51.33 (± 6.83) and 26.16 MPa (± 5.06) GPa respectively. The study confirmed the microstructure of the densification of the particles, confirming the purity and nature of nanometric powders obtained via the SCS. (author)

  13. Qualidade microbiológica de leite humano obtido em banco de leite Microbiological quality of human milk from a Brazilian milk bank

    Directory of Open Access Journals (Sweden)

    Álvaro B Serafini

    2003-12-01

    Full Text Available OBJETIVO: Determinar a prevalência de microrganismos indicadores e potencialmente patogênicos que indicam as condições higiênico-sanitárias das amostras de leite humano ordenhado coletadas em banco de leite. MÉTODOS: Foram realizadas análises microbiológicas de 338 amostras de leite humano ordenhado, sendo 194 de leite cru e 144, pasteurizado, coletadas em banco de leite humano de um hospital materno infantil de Goiânia, GO. As análises microbiológicas foram realizadas com semeadura em ágar Mc Conkey, de acordo com o tipo de bactéria. RESULTADOS: No leite cru, verificou-se a presença de Staphylococcus spp. Streptococcus spp., bolores e leveduras e Enterobacteriaceae. Observou-se que Staphylococcus aureus esteve presente em 10 (5,2% amostras, Staphylococcus epidermidis em 28 (14,4%, Streptococcus spp. em três (1,6%, bolores e leveduras em 43 (22,2% e Enterobacteriaceae em 49 (25,3%. Das 144 amostras de leite humano ordenhado pasteurizado, detectaram-se Staphylococcus aureus em cinco (3,5%, Staphylococcus epidermidis em 15 (10,4%, Staphylococcus lugdenensis em duas (1,4%, Streptococcus spp. em quatro (2,8%, bolores e leveduras em 37 (25,7% e Enterobacteriaceae em nove (6,3%. CONCLUSÕES: Os resultados mostraram um alto grau de contaminação no leite cru. No leite pasteurizado, apesar da eliminação da grande maioria de microrganismos potencialmente patogênicos, a percentagem de bolores e leveduras excedeu a de leite cru, mostrando a necessidade de obtenção de um leite com carga microbiana inicial mais baixa para que a pasteurização seja eficiente no controle microbiológico.OBJECTIVE: The objectives of the present study were to determine the prevalence of potentially pathogenic microorganisms that indicate the hygienic and sanitary conditions of human milk samples collected at a Human Milk Bank. METHODS: Three hundred and thirty eight (338 samples of human milk collected from a milk bank in a maternity in the municipality of Goiânia, in the state of Goias, Brazil were submitted to microbiological analysis. The latter were plated on McConkey agar according to the type of bacteria. Among the total number of samples collected, 194 consisted of raw milk and the remaining 144 were pasteurized milk. RESULTS: The presence of Staphylococcus spp., Streptococcus spp., yeasts and molds, and Enterobacteriaceae was verified in the raw milk samples. Staphylococcus aureus were isolated in 10 (5.2% samples, Staphylococcus epidermidis in 28 (14.4% samples, Streptococcus spp. in three (1.6% samples, yeasts and molds in 43 (22.2% and Enterobacteriaceae in 49 (25.3% samples. In a hundred and forty four (144 samples which underwent thermal treatment Staphylococcus aureus was detected in five (3.5% samples, Staphylococcus epidermidis in 15 (10.4%, Staphylococcus lugdenensis in two (1.4%, Streptococcus spp. in four (2.8%, yeasts and molds in 37 (25.7%, and Enterobacteriaceae in nine (6.3%. CONCLUSIONS: Analysis indicated a high degree of contamination in raw human milk, and as for the pasteurized milk, despite elimination of the great majority of potentially pathogenic microorganisms, the percentage of yeasts and molds was higher than in raw milk, demonstrating that a lower degree of initial contamination would be necessary for pasteurization to be an efficient means of microbiological control.

  14. Revestimentos obtidos por oxidação da liga AA3104-H19 por plasma eletrolítico (PEO)

    OpenAIRE

    Luciene Vanessa Maia da Rocha

    2013-01-01

    Resumo: O alumínio (Al) é o terceiro elemento metálico mais abundante na Terra. É um metal leve e é notável pela sua capacidade de resistir à corrosão. Estas características tornam o alumínio amplamente utilizado para embalagens de bebida, sendo importante na proteção e na conservação do produto. Entretanto, produtos muito ácidos, como por exemplo, os refrigerantes, os chás e os sucos cítricos, podem levar à corrosão de embalagens metálicas, ocasionando a degradação do material. Atualmente, s...

  15. EFEITO DO DIÂMETRO FOLICULAR SOBRE A QUALIDADE DOS OÓCITOS OBTIDOS DE OVÁRIOS DE OVELHAS (Ovis aries E CABRAS (Capra hircus

    Directory of Open Access Journals (Sweden)

    Ricardo de Macêdo Chaves

    2010-10-01

    Full Text Available This study aimed to evaluate the influence of follicular diameter on the quality of oocytes from ovaries of female sheep and goats. The ovaries of sheep (156 units and goats (105 units from slaughterhouse were used. The follicles were measured, aspirated and divided into three classes of follicular diameter: class 1 (CI – 2 to 3 mm, class 2 (CII – 4 to 5 mm and class 3 (CIII – 6 mm. The recovered oocytes were evaluated and classified according to morphological aspect in 5 quality groups: grade 1 (GI, grade 2 (GII, grade 3 (GIII, naked (N and atresia (A. Of the 468 follicles aspirated from sheep, 327 CI, 84 CII, CIII 57 and 83 GI, 78 GII, GIII 95, 119 N, 93 A were found, and from the 422 follicles aspirated from goats 197 CI, 132 CII, 92 CIII and 64 GI, 70 GII, 91 GIII, 123 N, 74 A were found. The data did not show significant correlation between quality of oocytes and diameter of follicles (P > 0.05. Under the conditions observed in this study it was concluded that the follicular diameter has no influence on the quality of cumulus-oocyte complex (COC recovered from the ovaries of female sheep and goats.

  16. Caracterização química, mecânica e morfológica do gesso obtido do pólo do Araripe

    Directory of Open Access Journals (Sweden)

    A. A. Barbosa

    2014-12-01

    Full Text Available O gesso é um sulfato de cálcio hemihidratado com fórmula química CaSO4.0,5H2O, este é produzido em grande abundância na região do Araripe estado de Pernambuco e apresenta uma pureza que varia de 80 a 95%, sua aplicação baseia-se principalmente na construção civil e em um segundo plano observa-se sua utilização na odontologia, industria química, ortopedia etc. Frente à elevada qualidade da matéria prima em questão e ao baixo emprego do gesso em materiais e objetos de maior valor agregado, verificou-se a necessidade da caracterização desta matéria prima para um maior conhecimento de suas propriedades, sendo realizadas para tal, análises de FTIR, DRX, FRX, MEV com EDS acoplado, ensaios mecânicos de resistência à compressão e à flexão, cálculo da porosidade geométrica dos corpos sólidos, análise granulométrica das partículas e avaliação do tempo de pega da pasta. Este estudo tem a finalidade de conhecer detalhadamente suas características químicas, morfológicas e mecânicas, para que então posteriormente tais informações possam ser válidas para estudos referentes ao melhoramento de suas propriedades visando sua aplicação em novos produtos.

  17. Study of corrosion in metallic coating in steel-carbon by thermal spray; Estudo de corrosao em revestimentos metalicos em aco-carbono obtidos por aspersao termica

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Maria C.P.; Cavalcanti, Eliane B.; Rambo, Elisabeth S.M.; Araujo, Paulo M.M. [Instituto de Tecnologia e Pesquisa (IPT), Aracaju, SE (Brazil); Santos, Anderson O. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The effect caused for constituent elements of the watery environment of production of the oil on metallic coverings was studied that simulate the artificial rise of the oil (connecting rods of pump mechanic). For in such a way, the techniques of electrochemical analysis had been used, as the method of linear polarization and the extrapolation of the straight line of Tafel of metallic coverings [alloy of Bronze and Aluminum; alloy of CrNi 80/20; NiCr 80/20; 95MXC (Cr: 26.5% - 31.5%, Cr: 26.5% - 31.5%, B: 3.35% - 4.15%, Mn: 1.1% - 2.2%, Itself: 1.1% -2.1%, Faith) and aluminum] on the substratum steel simulating covering in the connecting rods of pump. Oil well had been raised the resistance characteristics the polarization of the metal when submitted to the watery way surrounding it. They had been evaluated the resistance the covering polarization applied on the steel, with the objective to analyze its resistance the corrosion and to verify the possibility of its use as barrier against the problems originated for the degradation in connecting rods of pump. For the calculated Taxes of Corrosion, it can be concluded that the Aluminum coverings (0,003 mm/year) and NiCr 80/20 (0,179 mm/year) had been the ones that had presented a bigger resistance to the corrosive way. (author)

  18. CPO e MID: alguns resultados obtidos em meninos brancos, de 8 a 12 anos DMF and RLM: some results in white children, eight to twelve years old

    Directory of Open Access Journals (Sweden)

    José Maria Pacheco de Souza

    1973-06-01

    Full Text Available São apresentados alguns dados sobre CPO e MID (Índice de ataque ao 1° molar permanente inferior direito. São estudadas as distribuições do MID e do CPO /MID = 0, ajustando-se a binomial e binomial negativa, respectivamente, tendo o teste de aderência acusado bom ajuste em 10 casos, dos 12 testados.Data on DMF and right lower first permanent molar (RLM are presented. Binomial and negative binomial distributions are fitted to the data, and the goodness of fit test indicates good fitting in 10 out of 12 cases.

  19. Caracterização agronômica de mutantes de bananeira obtidos por meio da radiação gama

    Directory of Open Access Journals (Sweden)

    Edson Perito Amorim

    2012-01-01

    Full Text Available A bananeira é uma das fruteiras de maior importância econômica, explorada quase exclusivamente por pequenos produtores. Constitui-se em fonte contínua de alimento e renda. Embora o Brasil figure como um dos maiores produtores de banana, a bananicultura nacional enfrenta sérios problemas nas fases de produção e pós-colheita, que limitam sua inserção no mercado internacional. Um dos fatores que levam a grandes perdas na produção é o tombamento resultante da altura elevada da planta das principais cultivares comerciais. Uma estratégia para a solução deste problema é a redução do porte por indução de mutação. O objetivo deste trabalho foi caracterizar mutantes de banana tipo Prata (cv´s Pacovan e Preciosa irradiadas, durante dois ciclos de produção, visando à seleção de plantas com porte baixo e boas características agronômicas. Plantas in vitro das duas cultivares foram irradiadas com raios gamas nas doses de 20 Gy ('Pacovan' - 200 mudas e 30 Gy ('Preciosa' - 200 mudas, subcultivadas por quatro vezes e posteriormente avaliadas em campo durante dois ciclos de produção. Foram selecionados quatro mutantes de cada cultivar com altura inferior à média de altura das testemunhas, após dois ciclos de avaliação. Observou-se que em alguns desses mutantes houve maior precocidade e maior massa do cacho quando comparados com as testemunhas. Pelos resultados, é possível selecionar plantas mutantes com características agronômicas superiores, tanto para a 'Pacovan' quanto para a 'Preciosa', submetidas à radiação gama.

  20. Cytotoxicity of copolymer PHEMA-g-LDPE obtained for ionizing radiation; Citotoxicidade de copolimero de PEBD-e-PHEMA obtido por radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzetti, Solange G.; Camillo, Maria A.P.; Higa, Olga Z. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Centro de Biologia Molecular]. E-mail: solangl@ig.com.br; Queiroz, Alvaro A.A. de [Universidade Federal de Itajuba, MG (Brazil). Dept. de Fisica e Quimica

    2005-07-01

    Polymeric biomaterials are the polymers described in the literature which are employed in medicine and biotechnology. The aim of the work was the preparation of biocompatible polymeric surface for the posterior immobilization of protein compounds using grafted copolymers obtained by ionizing radiation. The copolymers was obtained by gamma irradiation induced grafting of 2-hydroxyethyl methacrylate (HEMA) onto low density polyethylene (LDPE) in different conditions.. The grafting yield ranged from 2% to 50%. The copolymers were analysed by infrared spectroscopy (FTIR). MEV micrographs showed a smooth surface for the virgin LDPE and rough surface for the copolymers due to the grafted PHEMA. The hydrophilic property appeared with the grafting increase of PHEMA onto LDPE. The diffusion coefficient was determined. Cytotoxicity assay was performed for the evaluation of biocompatibility. The method is based on the quantitative assesment of surviving viable cells upon exposure of CHO cells to the material extract and incubation with the supravital dye MTS. The amount of MTS, taken up by the population of cells is directly proportional to the number of viable cells in culture. The grafted polymers were not cytotoxic and will be used for the chemical immobilization of the enzyme phospholipase A2, purified from the rattlesnake venom. (author)

  1. Extraction and characterization of cellulose nano whiskers from balsa wood; Extracao e caracterizacao de nanocristais de celulose obtidos da madeira balsa

    Energy Technology Data Exchange (ETDEWEB)

    Morelli, Carolina L.; Bretas, Rosario E.S., E-mail: bretas@ufscar.br [Universidade Federal de Sao Carlos - UFSCar, Sao Carlos, SP (Brazil); Marconcini, Jose M. [Embrapa Instrumentacao, Sao Carlos, SP (Brazil); Pereira, Fabiano V. [Universidade Federal de Minas Gerais - UFMG, Belo Horizonte, MG (Brazil); Branciforti, Marcia C. [Universidade de Sao Paulo - USP, Sao Carlos, SP (Brazil)

    2011-07-01

    In this study cellulose nano whiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were subjected to hydrolysis reactions for lignin and hemi cellulose digestion and acquisition of nano-scale cellulose. Cellulose nano crystals obtained had medium length and thickness of 176 nm and 7 nm respectively. Infrared spectroscopy and x-ray diffraction showed that the process used for extracting nano whiskers could digest nearly all the lignin and hemi cellulose from the balsa fiber and still preserve the aspect ratio and crystallinity, satisfactory enough for future application in polymer nano composites. Thermogravimetry showed that the onset temperature of thermal degradation of cellulose nano crystals (226 degree C) was higher than the temperature of the balsa fiber (215 degree C), allowing its use in molding processes with many polymers from the molten state.(author)

  2. Quadrados latinos obtidos por meio de técnicas de confundimento em ensaios fatoriais Latin squares obtained by confounding techiniques in factorial designs

    Directory of Open Access Journals (Sweden)

    Maria Cristina Stolf Nogueira

    2000-09-01

    Full Text Available Os esquemas em quadrado latino tem se mostrado muito úteis na experimentação agronômica e zootécnica. O modo de obtenção dos quadrados latinos em geral segue regras algébricas de construção a partir de operações básicas sobre o conjunto de números inteiros positivos, mais especificamente, sobre as classes de resto módulo (m. Da mesma forma, considerando um ensaio instalado em esquema fatorial, ao se usar a técnica do confundimento, formam-se tantos quadrados latinos ortogonais quantos forem os níveis de tratamento. Tais esquemas conduzem a repetições ortogonais de quadrados latinos. Assim, o objetivo deste trabalho é abordar a aplicação desta técnica de modo a facilitar o planejamento. É apresentado um exemplo de um ensaio fatorial 3 x 3 x 3 sem repetições.Latin square designs have been very useful in agriculture and animal sciences. They are, in general, obtained following algebrical rules from basic operations for positive integers and the m-modular number system. In this way, from an experiment installed in a factorial scheme, it is possible to obtain as many latin squares as the levels of treatments, through the use of a confounding technique. These schemes lead to orthogonal replications of latin squares. The aim of this work was to evaluate this technique in order to facilitate plannings. An example of a 3 x 3 x 3 factorial design without replications is presented.

  3. Benefits from corrosion management of ORBEL-I pipeline; Resultados obtidos com o gerenciamento da corrosao do oleoduto ORBEL-I

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Aline de Souza [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil); Fernandes Junior, Anibal Augusto; Viana, Flavio Godinho [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This work has for objective to present the results gotten with the management of the implanted internal corrosion in the pipeline Rio de Janeiro - Belo Horizonte I (ORBEL I), with 363 kilometers of extension and 18 inch of diameter. This management has for purpose to prevent and to control the corrosive process in the internal structure of the pipe through the identification of the basic causes of the corrosive process and the implantation of actions adjusted for the control of the process. The applied techniques and actions had been based on the described recommendations in the Communication Technique 116/99 No. - Management of the Corrosion of ORBEL I emitted for the Center of Research of PETROBRAS (CENPES). The applied actions had been: determination of the corrosion rate with the coupon use of loss of mass and probe, races of pig of cleanness, chemical analyses of the pumped product and the residue of corrosion, inhibitor injection and water reduction in the product. The results obtained show the decrease of corrosion rates and of corrosiveness of the products transported. (author)

  4. Espectros de duas formas de lignina obtidos por ressonância magnética nuclear Nuclear magnetic resonance spectra of two types of lignin

    Directory of Open Access Journals (Sweden)

    Romualdo Shigueo Fukushima

    2003-04-01

    Full Text Available O conteúdo de lignina pode ser útil na estimativa da digestão da fibra de plantas forrageiras. A determinação quantitativa da lignina pelo método espectrofotométrico pressupõe a existência de um padrão de referência satisfatório. O objetivo deste trabalho foi avaliar, por meio da ressonância magnética nuclear (RMN, duas ligninas, uma extraída com brometo de acetila (LBrAc e outra com solução ácida de dioxano (LDiox, para utilização como padrão de referência em análises espectrofotométricas. A ressonância de próton acusou altos teores de carboidratos contaminantes nas amostras de LBrAc. Como a cromatografia líquida já havia indicado menor presença de carboidratos contaminantes na LDiox, os espectros por ressonância de carbono, mais rica em detalhes do que a espectroscopia anterior, porém mais demorada, foram realizados somente nas ligninas LDiox. Este espectro revelou picos típicos, comuns à maioria das ligninas. Os achados da RMN foram condizentes com a análise química, a qual identificou que o carboidrato da parede celular que acompanha a LBrAc seria possivelmente a celulose, ao passo que a pequena contaminação da LDiox teria origem nas pentosanas. A LDiox pode ser considerada melhor padrão de referência para as análises espectrofotométricas do que a LBrAc.Lignin content can be useful to estimate fiber digestion of forage plants. Quantitative determination of lignin by the spectrophotometric method presumes an efficient standard. The objective of this work was to evaluate, by the nuclear magnetic resonance (NMR, two lignins, one extracted with acetyl bromide (AcBrL and another with acidic dioxane solution (DL, as standards in spectrophotometric analysis. Proton resonance revealed high presence of carbohydrates in the AcBrL residues. Because liquid chromatograph had already shown low contamination with carbohydrates in the DL samples, only carbon resonance, which is lengthier, but richer in details than proton resonance, was run on these lignin samples. The carbon resonance revealed typical peaks common to most lignins. NMR findings were harmonious with wet chemistry which revealed that the cell wall carbohydrates attached to AcBrL would possibly be cellulose whereas in the DL, the small carbohydrate components would come from pentosans. DL can be considered a better standard to the spectrophotometric analysis than AcBrL.

  5. Nanofiber production of poly (vinylidene fluoride) / hexaferrite, obtained by Blow Spinning Technique; Producao de nanofibras de poli (fluoreto de vinilideno)/hexaferrita, obtidos pela tecnica Blow Spinning

    Energy Technology Data Exchange (ETDEWEB)

    Dias, G.C.; Zadorosny, L.; Malmonge, J.A.; Malmonge, L.F., E-mail: gabriel.fct@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Ilha Solteira, SP (Brazil)

    2014-07-01

    In this study, fibrous films of poly (vinylidene fluoride) - PVDF with barium hexaferrite particles were obtained by Solution Blow Spinning technique. In such technique, the polymer solution is injected through an inner nozzle which experiences the action of an accelerated flux of gas that drags and stretches the jet solution forming the nanofibers. The films were obtained from solutions of PVDF/DMF (30% w/v), which was incorporated into barium hexaferrite particles in proportions of 1, 3 and 5% (w / w). The results of the micrographs revealed the formation of a fibrous film with good dispersion of the particles. Xray analyzes showed the predominance of the β crystalline phase of PVDF. The increase of the amount of particles induces the appearance of a characteristic peak of PVDF. EDX measurements confirmed the presence of particles in the films. (author)

  6. Agreement between data obtained from repeated interviews with a six-years interval Concordância entre dados obtidos em entrevistas repetidas com seis anos de intervalo

    Directory of Open Access Journals (Sweden)

    Carolina Castro Martins

    2008-04-01

    Full Text Available The objective of the study was to compare information collected through face-to-face interviews at first time and six years later in a city of Southeastern Brazil. In 1998, 32 mothers (N=32 of children aged 20 to 30 months answered a face-to-face interview with structured questions regarding their children's brushing habits. Six years later this same interview was repeated with the same mothers. Both interviews were compared for overall agreement, kappa and weighted kappa. Overall agreement between both interviews varied from 41 to 96%. Kappa values ranged from 0.00 to 0.65 (very bad to good without any significant differences. The results showed lack of agreement when the same interview is conducted six years later, showing that the recall bias can be a methodological problem of interviews.O objetivo do estudo foi comparar a informação coletada em entrevista pessoal num primeiro momento e seis anos depois, em Minas Gerais. Em 1998, 32 mães (N=32 de crianças com idade entre 20 a 30 meses responderam à entrevista pessoal com questões estruturadas sobre os hábitos de escovação das crianças, sendo repetida seis anos depois. As duas entrevistas foram comparadas em concordância geral e em coeficientes kappa e kappa ponderado. A concordância geral entre as entrevistas variou de 41% a 96%. Os valores de kappa variaram de 0,00 a 0,65 (muito ruim a bom, sem diferença significativa. Os resultados mostraram que houve ausência de concordância quando a mesma entrevista foi conduzida seis anos depois, mostrando que o viés de memória pode ser um problema metodológico das entrevistas.

  7. Synthesis and characterization photocatalyst of titanium oxide obtained by the Pechini; Sintese e caracterizacao fotocatalitica do oxido de titanio obtido pelo Metodo Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, P.C.; Costa, A.C.F.M.; Lira, H.L. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais; Sasaki, J.M. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Departamento de Fisica; Santos, S.K., E-mail: pollyanacae@yahoo.com.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Departamento de Engenharia Quimica

    2011-07-01

    The photocatalysis using TiO{sub 2} semiconductor has shown great efficiency in the treatment of toxic pollutants and non-biodegradable materials, commonly present in air and domestic and industrial effluents. Thus, the aim of this work is to study the evaluation of photocatalytic activity of TiO{sub 2} samples synthesized by the Pechini method at a ratio of citric acid / metal cation of 2:1 and 4:1. The synthesized samples were characterized by X-ray diffraction, quantification of phases using the Rietveld method of refinement of the structure and after analyzed in photocatalytic bench tests using methyl red dye. The results showed that in a 2:1 ratio, the sample resulted in the formation of 100% of anatase phase, while in the 4:1 ratio sample showed 73.51% of anatase phase and 10.5% of rutile phase. The 4:1 sample showed the best performance discoloring over 70% of the dye for a period close to 24h. (author)

  8. Characterisation of titanium nitride films obtained by metalorganic chemical vapor deposition (MOCVD); Caracterizacao de filmes de nitreto de titanio obtidos por MOCVD

    Energy Technology Data Exchange (ETDEWEB)

    Pillis, M.F., E-mail: mfpillis@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais; Franco, A.C. [Universidade de Sao Paulo (IF/USP), SP (Brazil). Inst. de Fisica; Araujo, E.G. de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Sacilotti, M. [Universidade Federal de Pernambuco (IF/UFPE), Recife, PE (Brazil). Inst. de Fisica; Fundacao de Amparo a Ciencia e Tecnologia de Pernambuco (FACEPE), Recife, PE (Brazil)

    2009-07-01

    Ceramic coatings have been widely used as protective coating to improve the life of cutting tools, for corrosion protection and in microelectronics, optical and medical areas. Transition metals nitrides are of special interest due to its high hardness and thermal stability. In this work thin films of titanium nitride were obtained by MOCVD (metalorganic chemical vapor deposition) process. The tests were carried out for 1h at 700 deg C under 80 and 100 mbar of pressure. The characterization was made by using scanning electron microscopy coupled with dispersive energy analysis, and X-ray diffraction. Preliminary results suggested that Ti{sub 2}N phase was formed and that the growth rate varied between 4 and 13 nm/min according to the process parameter considered. (author)

  9. Evaluation of gels obtained from acetylation of chitosan in heterogeneous medium; Avaliacao de geis obtidos a partir da acetilacao da quitosana em meio heterogeneo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Rosangela Balaban; Silva, Dayse Luzia Pinheiro da; Costa, Marta [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Quimica]. E-mail: balaban@digi.com.br; Raffin, Fernanda Nervo [Universidade Federal do Rio Grande do Norte (UFRGN), Natal, RN (Brazil). Centro de Ciencias da Saude. Dept. de Quimica, Tecnologia Farmaceutica e de Alimentos; Ruiz, Naira Machado da Silva [Centro de Pesquisa Leopoldo A. Miguez de Mello (CENPES), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Chitosan was acetylated during 2, 5 and 10 h and physical gels were obtained at different polymer concentrations in N,N-dimethylacetamide containing 5% of LiCl. Acetylation was confirmed by infrared spectroscopy and {sup 13}C NMR, and degrees of acetylation in the range of 0.82-0.91 were determined by NMR. The O-acetylation degree (0.12-0.15) was exclusively determined by a volumetric method. Rheological studies showed that the storage modulus values were smaller for the more acetylated samples and increased with the temperature and the polymer concentration. All the gels presented storage modulus superior to loss modulus, evidencing more elastic than viscous characteristics. The results obtained in this work suggest a gelation process based on a balance between O and N-acetylation and intermolecular bonds. (author)

  10. Biodiesel de babaçu (Orbignya sp. obtido por via etanólica Biodiesel from babassu (Orbignya sp. synthesized via ethanolic route

    Directory of Open Access Journals (Sweden)

    José Renato de Oliveira Lima

    2007-06-01

    Full Text Available Biodiesel was obtained by transesterification of babassu oil in anhydrous ethanol and methanol, employing NaOH as catalyst. The products obtained were characterized by physico-chemical and thermogravimetric analysis. It could be concluded that the properties of the two types of biodiesel (ethanolic and methanolic are very similar when compared with diesel oil.

  11. COMPARAÇÃO DE DADOS METEOROLÓGICOS OBTIDOS POR ESTAÇÃO CONVENCIONAL E AUTOMÁTICA EM JABOTICABAL-SP

    Directory of Open Access Journals (Sweden)

    ALEXSANDRA DUARTE DE OLIVEIRA

    2010-01-01

    Full Text Available The objective of this study was to compare the weather data obtained from both conventional (CWS and automatic (AWS weather stations, in Jaboticabal, SP, Brazil (latitude: 21º14'05" S, longitude: 48º17'09" W and altitude: 613,68m, from July 1997 to June 2002. Daily data were collected and analyzed statistically by regression analysis. The results showed a good relationship between CWS and AWS, specially for air mean temperature, minimum temperature, maximum temperature and rainfall. Air humidity and atmospheric pressure showed the highest errors, respectively equal to 5,69% and 3,64 hPa. Wind velocity at 2m did not show good precision and accuracy because its estimation for CWS.

  12. Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Henrique Dutra Simoes

    2001-07-01

    Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0-3) by three calibrated examinators. Both results on occlusal and gingival margins have shown no statistic significant difference among the three groups evaluated (p>0.05). The Er:YAG laser have shown to be as effective as the conventional methods for cavity preparation and etching, suggesting its use for the class V cavity preparation and enamel etching. (author)

  13. Impregnation of 12-tungstophosphoric acid on silica - part II: effect of different solvents on the impregnation and catalytic activity in methyl esterification of stearic acid; Impregnacao do acido 12-tungstofosforico em silica - parte II: efeito de diferentes solventes na impregnacao e atividade catalitica na esterificacao metilica de acido estearico

    Energy Technology Data Exchange (ETDEWEB)

    Scroccaro, Karine Isabel; Yamamoto, Carlos I., E-mail: karineisabel@yahoo.com.br [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Centro Politecnico. Departamento de Engenharia Quimica; Tanobe, Valcineide O. de A.; Oliveira, Alan Antonio de [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Departamento de Engenharia e Tecnologia Florestal; Wypych, Fernando [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Departamento de Quimica

    2014-04-15

    Materials obtained by the immobilization of 12-tungstophosphoric acid (PTA) on silica using the method of impregnation with excess solution in distinct solvents (aqueous HCl, methanol:H{sub 2}O, and acetonitrile) were evaluated for use as catalysts in the methyl esterification of stearic acid. Optimum conditions were established for the impregnation of 0.5 g (w/w) of PTA on amorphous silica, under stirring at 150 rpm for 24 h, using 20 mL of 0.1 mol L{sup -1} HCl as the solvent. After calcination at 200 deg C, high conversions were obtained under mild reaction conditions, resulting in high turnover numbers. The catalyst was evaluated in ten catalytic cycles of use, where the activity was reduced only slightly, attesting its stability and the possibility to apply it to industrial production of methylesters. (author)

  14. Development of methodology for the synthesis of poly(lactic acid-co-glycolic acid) for use in the production of radioactive sources; Desenvolvimento da metodologia para sintese do poli(acido latico-co-acido glicolico) para utilizacao na producao de fontes radioativas

    Energy Technology Data Exchange (ETDEWEB)

    Peleias Junior, Fernando dos Santos; Zeituni, Carlos Alberto; Rostelato, Maria Elisa Chuery Martins; Souza, Carla Daruich de; Mattos, Fabio Rodrigues de; Moura, Eduardo Santana de; Moura, Joao Augusto; Benega, Marcos Antonio Gimenes; Feher, Anselmo; Costa, Osvaldo Luiz da; Rodrigues, Bruna Teiga, E-mail: fernandopeleias@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP/CTR), Sao Paulo, SP (Brazil). Centro de Tecnologia das Radiacoes; Fechine, Guilhermino Jose [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil). Escola de Engenharia

    2015-05-15

    According to the World Health Organization, cancer is a leading cause of death worldwide. A radiotherapy method extensively used in prostate cancer is brachytherapy, where the area requiring treatment receives radioactive seeds. Iodine-125 seeds can be inserted loose or stranded in bioabsorbable polymers produced from poly(lactic-co-glycolic acid) (PLGA). We developed the synthesis methodology for PLGA and the results obtained show that it was possible to determine the optimal reaction parameters (time and temperature) for PLGA in 80/20 (lactide/glycolide) ratio. The yield was higher than 90% using a temperature of 110 °C and reaction time of 72 hours; however, the molecular weight values obtained are very low compared to those obtained by other authors. New tests using previously synthesized dimers and nitrogen atmosphere are being performed. These conditions could potentially increase the molar mass of PLGA. All techniques used confirmed the expected structure of the polymer. (author)

  15. Marginal microleakage in vitro study on class V cavities prepared with Er:YAG laser and etched with acid or etched with Er:YAG laser and acid; Estudo in vitro da microinfiltracao marginal em cavidades classe V preparadas com laser de Er:YAG e condicionadas com acido ou com laser de Er:YAG e acido

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Henrique Dutra Simoes

    2001-07-01

    Microleakage at the interface between the teeth and the restorative materials remains a problem with composite resin restorations. Microleakage at the gingival margins of class V cavities restorations still challenge as they are usually placed in dentin and/or cementum. Previous studies have shown that the cavity preparation with Er:YAG laser is possible. It has been reported that Er:YAG laser has ability to create irregular surface providing micromechanical retention for adhesive dental restorative materials and to improve marginal sealing. The purpose of this in vitro study was to evaluate the marginal microleakage on class V cavities prepared with Er:YAG laser and etched with acid or with Er:YAG laser and acid, in compared to those prepared and etched conventionally. Thirty human molars were divided into three groups, namely: group I - prepared with Er:YAG laser (KaVo KEY Laser II - Germany) and etched with 37% phosphoric acid; group II - prepared with Er:YAG laser and etched with Er:YAG laser and 37% phosphoric acid; group III (control group) - prepared with high speed drill and etched with 37% phosphoric acid. All cavities were treated with same adhesive system (Single Bond - 3M) and restored with the composite resin (Z100 - 3M), according to the manufacturer's instructions. The specimens were stored at 37 deg C in water for 24 hours, polished with Sof-Lex discs (3M), thermally stressed, sealed with a nail polish coating except for the area of the restoration and 1 mm around it, and immersed in a 50% aqueous solution of silver nitrate for 24 hours. After that, the specimens were rinsed in water, soaked in a photodeveloping solution and exposed to a fluorescent light for 8 hours. The teeth were embedded in an autopolymerizing resin and sectioned longitudinally using a diamond saw microtome under running water. The sections were photographed. The microleakage at the occlusal cavity and at the gingival margins of each specimen was evaluated with scores (0-3) by three calibrated examinators. Both results on occlusal and gingival margins have shown no statistic significant difference among the three groups evaluated (p>0.05). The Er:YAG laser have shown to be as effective as the conventional methods for cavity preparation and etching, suggesting its use for the class V cavity preparation and enamel etching. (author)

  16. Composicao quimica, perfil de acidos graxos e quantificacao dos acidos ƒ¿-linolenico, eicosapentaenoico e docosahexaenoico em visceras de tilapias (Oreochromis niloticus = Percentual composition, fatty acids and quantification of the LNA (Alfa-Linolenic, EPA (Eicosapentaenoic and DHA (Docosahexaenoic acids in visceras of Nile Tilapia (Oreochromis niloticus

    Directory of Open Access Journals (Sweden)

    Nilson Evelázio de Souza

    2005-01-01

    Full Text Available Foi avaliada a composição química de vísceras de tilápias (Oreochromis niloticus criadas em cativeiro Os teores de umidade, cinza, proteína bruta e lipídios totais foram de 64,4%; 1,3%; 6,3% e 18,0%, respectivamente, caracterizando alta concentração de lipídiostotais em relação a outros resíduos de peixes. Foram identificados 49 ácidos graxos, sendo majoritários os ácidos: oléico, (32,8%, seguido do palmítico, (19,9% e linoléico, (18,2%. As razões entre n-6/n-3 e ácidos poliinsaturados/saturados foram de 5,5 e 0,9, respectivamente. As quantificações dos ácidos graxos alfa-linolênico, eicosapentaenóico e docosahexaenóico, em mg/g de lipídios totais, foram de 10,4, 1,4 e 9,3, respectivamente. O elevado teor de lipídios totais das vísceras contribuiu significativamente para as quantidadesde ácidos graxos n-3. Todos os parâmetros analisados foram satisfatórios sob o ponto de vista nutricional e neste sentido as vísceras de tilápias poderão ser utilizadaa para alimentar peixes ou outros animais.The chemical composition was evaluated in visceras of tilapias raised in captivity. The moisture, ash, crude protein and total lipids contents were 64.4%; 1.3%; 6.3% and 18.0%, respectively, characterizing high total lipids concentration in relation other residues of fish. Forty nine fatty acids were detected, the major fatty acids were oleic (32.8%, palmitic (19.9% and linoleic-1 (18.2% and oleic (9.4%. The ratio n-6/n-3 and polyunsaturated/saturated fatty acids, showed the values 5.5 and 0.9, respectively. The quantifications of alfa-linolenic, eicosapentaenoic and docosahexaenoic acids (in mg/g of total lipids, were 10.4, 1.4 and 0.3, respectively. The higher contents of total lipids in visceras contributed significantly for amounts of n-3 fatty acids. All the parameters analyzed were shown nutritional value satisfactory in this sense visceras of tilapias can be used in the feed of fish and other animal.

  17. Optimized Analytical Method to Determine Gallic and Picric Acids in Pyrotechnic Samples by Using HPLC/UV (Reverse Phase); Optimizacion del Metodo Analitico mediante HPLC/UV Operando en Fase Inversa para la Determinacion de Acido Galico y Acido Picrico en Muestras de Origen Pirotecnico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Alonso, S.; Perez Pastor, R. M.

    2013-10-01

    A study on the optimization and development of a chromatographic method for the determination of gallic and picric acids in pyrotechnic samples is presented. In order to achieve this, both analytical conditions by HPLC with diode detection and extraction step of a selected sample were studied. (Author)

  18. Liquid-liquid extraction (LLE) of Fe(III) and Ti(IV) by bis-(2-ethyl-hexyl) phosphoric acid (D2EHPA) in sulfuric acid medium; Extracao liquido-liquido de ferro (III) e titanio (IV) pelo acido bis-(2-etil-hexil) fosforico (D2EHPA) em meio de acido sulfurico

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Glauco Correa da; Cunha, Jose Waldemar Silva Dias da [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil). Dept. de Quimica e Materiais Nucleares; Dweck, Jo [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica. Dept. de Processos Inorganicos; Afonso, Julio Carlos [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica. Dept. de Quimica Analitica]. E-mail: julio@iq.ufrj.br

    2008-07-01

    This work presents a study on the separation of Fe(III) and Ti(IV) from sulfuric acid leaching solutions of ilmenite (FeTiO{sub 3}) using liquid-liquid extraction with D2EHPA in n-dodecane as extracting agent. The distribution coefficients (K{sub D}) of the elements related to free acidity and concentration of Fe(III) and Ti(IV) were determined. Free acidity was changed from 3x10{sup -2} to 11.88 mol L{sup -1} and D2EHPA concentration was fixed at 1.5 mol L{sup 1}. Recovery of final products as well as recycling of wastes generated in the process were also investigated. The LLE process as a feasible alternative to obtain high-purity TiO{sub 2}. (author)

  19. Development of methodology for the synthesis of poly(lactic acid-co-glycolic acid) for use in the production of radioactive sources; Desenvolvimento da metodologia para sintese do poli(acido latico-co-acido glicolico) para utilizacao na producao de fontes radioativas

    Energy Technology Data Exchange (ETDEWEB)

    Peleias Junior, Fernando dos Santos

    2013-07-01

    According to World Health Organization (WHO), cancer is a leading cause of death worldwide. Prostate cancer is the second most common cancer in men. A method of radiotherapy which has been extensively used is brachytherapy, where radioactive seeds are placed inside the area requiring treatment. Iodine-125 seeds can be placed loose or stranded in bioabsorbable polymers. Stranded seeds show some advantages, since they reduce the rate of seed migration, an event that could affect the dosimetry of the prostate and cause unnecessary damage to healthy tissues or organs. For Iodine-125 stranded seeds, polyglactin 910 (poly(lactic-co-glycolic acid)) (PLGA), with a coverage of polyglactin 370 (Vicryl Registered-Sign ) is used. It was purposed in this dissertation, the study and development of the synthesis methodology for PLGA via ring-opening polymerization, as well as its characterization, with the objective of using the synthesized material to manufacture a material similar to RAPID Strand{sub Registered-Sign }. The results obtained show that it was possible to determine the optimal reaction parameters (time and temperature) for PLGA in 80/20 (lactide/glycolide) ratio. Using a temperature of 110 Degree-Sign C and reaction time of 24h, a yield of 86% was obtained, and increasing the reaction time to 72 hours, the yield was higher than 90%. The molecular mass values obtained from the samples are still very low compared to those obtained by other authors in the literature (about 20%). Failures in the sealing of vials, leaving them vulnerable to moisture and oxygen, or lack of an efficient stirring system might be possible explanations for these results. A suitable chemical reactor could solve the problem. Regarding polymer characterization, all techniques used not only confirmed the expected structure of the polymer, but also showed the highest proportion of lactide units compared to to glycolide units. (author)

  20. Biosynthetic origin of acetic acid using SNIF-NMR; Determinacao da origem biossintetica de acido acetico atraves da tecnica 'Site Specific Natural Isotopic Fractionation Studied by Nuclear Magnetic Resonance (SNIF-NMR)'

    Energy Technology Data Exchange (ETDEWEB)

    Boffo, Elisangela Fabiana; Ferreira, Antonio Gilberto [Sao Carlos Univ., SP (Brazil). Dept. de Quimica

    2006-05-15

    The main purpose of this work is to describe the use of the technique Site-Specific Natural Isotopic Fractionation of hydrogen (SNIF-NMR), using {sup 2}H and {sup 1}H NMR spectroscopy, to investigate the biosynthetic origin of acetic acid in commercial samples of Brazilian vinegar. This method is based on the deuterium to hydrogen ratio at a specific position (methyl group) of acetic acitained by fermentation, through different biosynthetic mechanisms, which result in different isotopic ratios. We measured the isotopic ratio of vinegars obtained through C{sub 3}, C{sub 4}, and CAM biosynthetic mechanisms, blends of C{sub 3} and C{sub 4} (agrins) and synthetic acetic acid. (author)

  1. 15-demethylisoplumieride acid, a new iridoid isolated from the bark of Plumeria rubra and latex of Himatanthus sucuuba; Acido 15-desmetilisoplumierideo, um novo iridoide isolado das cascas de Plumeria rubra e do latex de Himatanthus sucuuba

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, Alaide de Sa; Amaral, Ana Claudia F. [Fundacao Inst. Oswaldo Cruz (FIOCRUZ), Rio de Janeiro, RJ (Brazil). Instituto de Tecnologia em Farmacos -Farmanguinhos. Lab. de Plantas Medicinais e Derivados; Silva, Jefferson Rocha de A. [Universidade Federal do Amazonas, Manaus, AM (Brazil). Dept. de Quimica]. E-mail: jrocha_01@ufam.edu.br; Schripsema, Jan [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacazes, RJ (Brazil). Setor de Quimica de Produtos Naturais; Rezende, Claudia M.; Pinto, Angelo C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica

    2007-09-15

    Himatanthus sucuuba and Plumeria rubra are used in folk medicine in Brazil to treat various ailments. The isolation of the new iridoid 15-demethylisoplumieride from the bark of Plumeria rubra L. var. acutifolia (Ait) Woodson and latex of Himatanthus sucuuba (Spruce) Woodson is reported. Other iridoid glycosides were obtained from both plants. The structures of these substances were elucidated by spectral analysis and comparison with data already reported. (author)

  2. Evaluation of gamma irradiation effects on carotenoids, ascorbic acid and sugar contents of buriti fruit (Mauritia flexuosa L.); Avaliacao dos efeitos da radiacao gama nos teores de carotenoides, acido ascorbico e acucares do fruto Buriti do Brejo (Mauritia flexuosa L.)

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Antonio Luis dos Santos [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Quimica, Quimica Organica e de Produtos Naturais], e-mail: santoslima@ime.eb.br; Lima, Keila dos Santos Cople; Silva, Jaqueline Michele [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear. Irradiacao de Alimentos], e-mail: keila@ime.eb.br, e-mail: jaquelinefisica@bol.com.br; Coelho, Maysa Joppert [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear. Engenharia Ambiental], e-mail: maysa@ime.eb.br; Godoy, Ronoel Luiz de Oliveira [EMBRAPA Agroindustria de Alimentos, Rio de Janeiro, RJ (Brazil). Lab. de Cromatografia Liquida, Quimica Organica e de Produtos Naturais], e-mail: ronoel@ctaa.embrapa.br; Pacheco, Sidney [EMBRAPA Agroindustria de Alimentos, Rio de Janeiro, RJ (Brazil). Lab. de Cromatografia Liquida, Ciencia e Tecnologia de Alimentos], e-mail: sidney@ctaa.embrapa.br

    2009-07-01

    Buriti (Mauritia flexuosa L.), a typical fruit from the Northeast and Center-West Amazon of Brazil, is used in many regional dishes. It is considered an excellent source of carotenoids that are A vitamin precursors, showing a majority of beta-carotene. It also presents ascorbic acid and sugar contents. Many studies have indicated that the lack of A vitamin is the main cause of night blindness and xerophthalmia. Also, ascorbic acid deficiency may cause scorbutic disease. The use of food irradiation is growing and represents an economic benefit to agriculture through the reduction of post-harvesting losses while maintaining food nutritional quality. In this study, buriti in natura was treated with gamma irradiation with doses of 0.5 kGy and 1.0 kGy. The objective was to evaluate the irradiation effects on total carotenoids, ascorbic acid and sugars concentrations of buriti. The fruit was evaluated through the total carotenoids analysis, by spectrophotometry, and the carotenoids (alpha and beta-carotene and lutein), ascorbic acid and sugars were determined by high performance liquid chromatography (HPLC). The results showed that buriti is an excellent source of total carotenoids (44600 {mu}g/100 g). The irradiation of buriti with the dose of 0.5 kGy did not significantly change carotenoids and sugars contents. However, there was a reduction of ascorbic acid concentration with an increase of the dose, which may have been caused by irradiation or by intrinsic and extrinsic factors that alter ascorbic acid stability in food, converting ascorbic to dehydroascorbic acid, while keeping the C vitamin active form. (author)

  3. Zirconia silicate modified with phytic acid (IP6) and its effect on uranyl sorption; Silicato de circonio modificado con acido fitico (IP6) y su efecto en la sorcion de uranilo

    Energy Technology Data Exchange (ETDEWEB)

    Escalante G, D. C.

    2016-07-01

    In this work the sorption capacity of uranyl ions on zirconium silicate (ZrSiO{sub 4}) extracted from sea sand of Baja California Sur was studied, the effect of phytic acid (IP6) accompanied by a perchlorate salt of sodium (NaClO{sub 4}) on the surface of the mineral. In the first stage, ZrSiO{sub 4} was obtained from sea sand by extraction using hydrofluoric acid, the purified and hydrated material was later characterized by instrumental techniques such as X-ray diffraction to determine its purity and crystallinity. The ZrSiO{sub 4}-purified, ZrSiO{sub 4}/NaClO{sub 4} and ZrSiO{sub 4}/IP6 were studied by physicochemical and surface characterization. By scanning electron microscopy was observed that ZrSiO{sub 4} initially is formed by flat structures, however, when it is hydrated with NaClO{sub 4} the formation of particles on the material exists, whereas when the IP6 is added the crystals on the surface are elongated forming structures geometric shapes. This modification on the surface of the ZrSiO{sub 4} was corroborated by atomic force microscopy where significant changes were observed in the topography of the purified and hydrated material. By Fourier transform infrared spectroscopy is identifies the presence of functional groups from hydration with IP6 and NaClO{sub 4} on the surface of SrSiO{sub 4}. Characterization of surface properties was performed by determining the surface area of the purified ZrSiO{sub 4}, SrSiO{sub 4}/NaClO{sub 4} and ZrSiO{sub 4}/IP6 systems using the Bet multipoint and fractal dimension technique; the hydration time, zero loading point was evaluated by means of a bulk titration and surface site density (Ds). The fluorescence and phosphorescence techniques allowed determining the optimum hydration point and the uranium species sorbed on the surface of the ZrSiO{sub 4} as in the systems hydrated with IP6 and with NaClO{sub 4}. This technique provided relevant information about the speciation and complex formation of IP6 with uranyl ions on the surface of ZrSiO{sub 4}. Sorption isotherms and kinetics were prepared by the liquid scintillation technique, and this technique allowed corroborating the quantification of uranium at the surface. Surface acidity constants at the solid/liquid interface for both systems were obtained by modeling the acid-base titration curves with FiTEQL 4.0 software, where the chemical species and complexes formed on the mineral surface were identified. The results show that the ZrSiO{sub 4}/NaClO{sub 4} system has a maximum percentage of 98.8% sorption at ph 7, whereas with the proposed system ZrSiO{sub 4}/IP6 it was 99.2% from a ph of 3, from an initial concentration of uranium of 1 x 10{sup -3} M. (Author)

  4. Sterols and fatty acids analysis at the Llobregat River for a wastewater dumping episode; Analisis de esteroles y acidos grasos en el rio Llobrgat por un vertido de aguas residuales

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Lacal, J.; Garcia-Mendi, C.; Vega, A.; Pujadas, M.

    2006-07-01

    The study by gas chromatography (HRGC) and mass spectrometry (MS) of fatty acids and sterols of water samples from Anoia and Llobregat River, allowed to rule out the hypothesis of the Anoia River as the cause of dumping episode and even to determine that the episode was not associated to the faecal or residual contamination. Nevertheless, it has permitted us to have a better knowledge of these families of organic compounds in the basin of the Llobregat River. In the acidic fraction, saturated and unsaturated fatty acids of 14, 16 and 18 atoms of carbon from oil fish, animal fat or hydrogenated oils with industrial and domestic use were found. The application of different sterols indices (coprostanol, cholesterol, cholestanol, stigmasterol, stigmastadienol and sitosterol) permitted us to study the role of the sterols and the significance of the contamination from animal sterols, fitosterols in the studied samples. (Author) 19 refs.

  5. Determinações simultaneas de acidos em misturas por titulações potenciometricas e suas aplicações a analises de antiacidos, sucos de uva e vinhos

    OpenAIRE

    Nilson Evelazio Souza

    1985-01-01

    Resumo: Os vários métodos matemáticos e gráficos usados no tratamento dos dados de titulações potenciométricas são discutidos. Um método algébrico linear foi utilizado na deterninação de várias misturas sintéticas visando a aplicação em matrizes reais. Foram estudadas as determinações simultâneas dos ácidos em várias misturas dos ácidos clorídrico, tartárico, málico, succínico e cítrico. Os valores de pKa destes ácidos foram determinados em meio 1,0 M de NaNO3, tendo em vista o ajuste de forç...

  6. Impregnation of 12-tungstophosphoric acid on silica - part I: determination of impregnation parameters, characterization and evaluation of catalytic activity; Impregnacao do acido 12-fosfotungstico em silica - parte I: determinacao de parametros de impregnacao, caracterizacao e avaliacao da atividade catalitica

    Energy Technology Data Exchange (ETDEWEB)

    Scroccaro, Karine Isabel; Tanobe, Valcineide Oliveira de Andrade; Cocco, Lilian Cristina; Yamamoto, Carlos Itsuo, E-mail: karineisabel@yahoo.com.br [Universidade Federal do Parana, Curitiba, PR (Brazil). Centro Politecnico. Dept. de Engenharia Quimica; Wypych, Fernando [Universidade Federal do Parana, Curitiba, PR (Brazil). Centro Politecnico. Dept. de Quimica

    2012-07-01

    Catalyst based on Kegging-type heteropolyacids (H{sub 3}PW{sub 12}O{sub 40} - HPA), supported on SiO{sub 2} (H{sub 3}PW), were prepared by the impregnation method under different thermal treatment conditions. The materials were characterized by different instrumental techniques and used as catalysts in the methyl esterification reactions of stearic acid. Using the catalyst with 15% of HPA, conversions higher than 60% were obtained after 2 h of reaction at 65 deg C. Recovery studies using hot-filtration with ethanol at 75 deg C showed satisfactory activity for two additional reaction cycles. (author)

  7. Niobium (V) doped bioceramics: evaluation of the hydrothermal route modified with citric acid and urea to obtain modified hydroxyapatite; Bioceramicas aditivadas com niobio (V): avaliacao da rota hidrotermica modificada com acido citrico e ureia para obtencao de hidroxiapatitas modificadas

    Energy Technology Data Exchange (ETDEWEB)

    Simomukay, E.; Souza, E.C.F. de; Antunes, S.R.M.; Borges, C.P.F.; Michel, M.D.; Antunes, A.C. [Universidade Estadual de Ponta Grossa (UEPG), Ponta Grossa, PR (Brazil)

    2016-01-15

    Synthetic hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}; HA) has become a widely used ceramic material for bone reconstruction due to its biocompatibility with the bone tissue. This biocompatibility as well as other physical and chemical properties of the hydroxyapatite can be modified by the addition of different ions to its structure. Niobium (V) ion has not been commonly used in the hydroxyapatite synthesis. The objective of this study was to evaluate the use of hydrothermal route in the niobium (V) doped hydroxyapatite synthesis. The route used the niobium ammonium oxalate (NH{sub 4}H{sub 2}[NbO(C{sub 2}O{sub 4}){sub 3}].3H{sub 2}O) complex as a niobium (V) ion precursor. The addition of citric acid and urea in the hydrothermal route is used for the control of synthesis pH and precipitation rate. Pure sample and sample added with 5.3 ppm of niobium (V) ion were prepared. The coexistence of other phases besides the hydroxyapatite was not observed in any of the samples through the use of X-ray diffraction and infrared spectroscopy (FTIR) techniques. The FTIR technique revealed the presence of hydroxyapatite characteristic functional groups. The scanning electron microscopy analysis showed the formation of agglomerates composed of round particles, confirmed by the transmission electron microscopy technique. The X-ray fluorescence spectroscopic analysis detected the presence of niobium in the doped sample. The results showed that niobium (V) doped hydroxyapatite can be synthesized by means of hydrothermal route, which may be considered as huge potential for future application in bioceramics. (author)

  8. Modified montmorillonite as a heterogeneous catalyst in (m)ethyl esterification reaction of lauric acid; Montmorilonita modificada como catalisador heterogeneo em reacoes de esterificacao (M)etilica de acido laurico

    Energy Technology Data Exchange (ETDEWEB)

    Zatta, Leandro; Nepel, Angelita; Barison, Andersson; Wypych, Fernando, E-mail: wypych@ufpr.br [Departamento de Quimica, Universidade Federal do Parana (UFPR), Curitiba , PR (Brazil)

    2012-07-01

    Montmorillonite was modified with zirconium polyoxycations in the presence of ammonium sulphate. The material was characterized and used as a catalyst in the esterification of lauric acid, the reactions being accompanied by 2{sup 3} factorial design. Conversions of up to 95.33 and 83.35% were observed for the methyl and ethyl esterification reactions respectively, proving superior to results obtained by thermal conversion. The material was submitted to three reaction cycles and similar conversions were observed, indicating the catalyst is not significantly deactivated after reuse. The catalyst was also tested under reflux conditions, yielding a maximum conversion of 36.86%. (author)

  9. Modeling of an immobilized lipase tubular reactor for the production of glycerol and fatty acids from oils; Modelado de un reactor tubular de lipasas inmovilizadas para la produccion de glicerol y acidos grasos a partir de aceites

    Energy Technology Data Exchange (ETDEWEB)

    Oddone, S.; Grasselli, M.; Cuellas, A.

    2010-07-01

    Advances in the design of a bioreactor in the fats and oils industry have permitted the hydrolysis of triglycerides in mild conditions and improved productivity while avoiding the formation of unwanted byproducts. The present work develops a mathematical model that describes the hydrolytic activity of a tubular reactor with immobilized lipases for the production of glycerol and fatty acids from the oil trade. Runge Kuttas numerical method of high order has been applied, considering that there is no accumulation of the substratum in the surface of the membrane, where the enzyme is. At the same time, different equations based on the kinetic model of Michaelis Mentens and the Ping-Pong bi-bi mechanism were examined. Experimental data in discontinuous systems are the basis for the development of the quantitative mathematical model that was used to simulate the process computationally. The obtained results allow for optimizing both the operative variables and the economic aspects of industrial processes. (Author)

  10. Gamma radiation effects at color, antioxidant capacity and fatty acid profile in peanut (Arachis hypogaea L.); Efeitos da radiacao gama na cor, capacidade antioxidante e perfil de acidos graxos em amendoim (Arachis hypogaea L.)

    Energy Technology Data Exchange (ETDEWEB)

    Camargo, Adriano Costa de; Canniatti-Brazaca, Solange Guidolin; Mansi, Debora Niero; Domingues, Maria Antonia Calori [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Agroindustria, Alimentos e Nutricao; Arthur, Valter, E-mail: arthur@cena.usp.b [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)

    2011-01-15

    Irradiation is efficient at extinction fungi contamination in peanuts. Peanuts have high biologic value protein, minerals, vitamin E, complex B, and high concentration of lipids. The objective of this research is to evaluate the gamma irradiation effect on color, total phenolic, antioxidant activity, and fatty acid profile in peanuts (Arachis hypogaea L.). Cultivars IAC-Tatu ST and IAC-Runner 886 were submitted to gamma radiation with doses of 5.0; 7.5; 10.0, and 15.0 kGy and storage at room temperature. There was no significant difference in the color of IAC-Tatu ST. However, significant difference was found in the luminosity and Chroma in IAC-Runner 886. Total fenolics differed from the control with 33.27 mg.g{sup -1} and treatment dose of 10.0 kGy with 58.60 mg.g{sup -1} in IAC-Tatu ST. This parameter not had significant difference in IAC-Runner 886 and the control with 51.59 mg.g{sup -1}. The antioxidant activity did not present significant difference with a dose of 10.0 kGy, recommended for the elimination of fungi in peanuts. The dose of 10.0 kGy showed a decrease in saturated fatty acids, increase in unsaturated fatty acids, and an increase in linolleic acid. The oleic/linoleic relation decreased justifying further research correlating storage and oxidative stability. (author)

  11. Behavior of uranium isotopes along a tidal cycle in a study affected by acid mine drainage; Comportamiento de los isotopos de uranio a lo largo de un ciclo mareal en un estuario afectado por denaje acido de minas

    Energy Technology Data Exchange (ETDEWEB)

    Hierro, A.; Martin, J. e.; Olias, M.; Garcia, C.; Bolivar, J. P.

    2013-07-01

    The Tinto and Odiel rivers converge in an estuarine system known as the Ria de Huelva, which is an ecosystem of great interest, conditioned by hydrochemical facts. The main objective of this study was to analyze the behavior of uranium isotopes in the waters of the Red River estuary in a tidal cycle under hydrochemical conditions of high gradients of salinity and pH generated by the acidic waters of the Rio Tinto and seawater. (Author)

  12. Effect of niobium addition to the Fe-17% Cr alloy on the resistance to generalized corrosion in sulfuric acid; Efeito da adicao de niobio a liga Fe-17% Cr sobre a resistencia a corrosao generalizada em acido sulfurico

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Neusa; Wolynec, Stephan

    1993-12-31

    The aim of present work was to investigate the influence of Nb upon the corrosion resistance to o.5 M H2 SO{sub 4} cf 17% Cr ferritic stainless steels, to which it was added in amounts larger than those necessary for the stabilization of interstitial elements. The performance of Fe-17% Cr alloys containing 0.31%, 0.58%, 1.,62% Nb was compared to that of two other Fe-17% Cr alloys containing 0.31%, 0.58% and 1.62% Nb was compared to that of two other Fe-175 Cr alloys, one without additions and another containing 0.93% Nb. Through weight and electrochemical measurements and through morphologic examination of corroded surface it was found that in o.5 M H{sub 2} SO{sub 4} solution the corrosion of these alloys, with the exception of that containing molybdenum, products in two different stages. In the first stage (up to about 60 minutes) the rate practically does not change with time, the lower rates being displayed by alloys containing larger mounts of Nb. In the second stage (for immersion times larger than 60 minutes) the corrosion rate increases with time. the corrosion rate of Mo containing alloy is constant with time so that for longer immersion times this alloy becomes the most resistant. The first stage was discussed in terms of electromechanical properties of Nb and its ability to combine with steel impurities, while the second stage was considered as affected by corrosion products formed on the surface of these alloys after certain time of immersion. (author) 24 refs., 1 fig., 3 tabs.

  13. REVIEW. BACTERIAS ACIDO LÁCTICAS: PAPEL FUNCIONAL EN LOS ALIMENTOS BACTÉRIAS ÁCIDO LÁCTICAS: PAPEL FUNCIONAL NOS ALIMENTOS REVIEW LACTIC ACID BACTERIA: FUNCTIONAL ROLE IN THE FOODS

    OpenAIRE

    RICARDO ADOLFO PARRA HUERTAS

    2010-01-01

    Las bacterias ácido lácticas han sido importantes en los alimentos por siglos por su considerable contribución al valor de los productos. Debido a varias de sus propiedades metabólicas, las bacterias ácido lácticas desempeñan un papel importante en la industria alimentaria, por su contribución significante al sabor, olor, textura, características sensoriales, propiedades terapéuticas y valor nutricional de los productos alimentarios. Este grupo está compuesto de un número de géneros incluyend...

  14. La ruta de señalización del acido salicílico juega un papel importante en la resistencia en tomate a Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) mediada por el gen Mi-1

    OpenAIRE

    Muñiz, Mariano; Rodriguez, C.I.; Kaloshian, I.; Nombela, Gloria

    2009-01-01

    Es bien conocido que la resistencia en tomate a Bemisia tabaci (Gennadius), a Macrosiphum euphorbiae (Thomas) y a tres especies de nematodos formadores de nódulos (Meloidogyne spp.) está mediada por el gen Mi-1. Asimismo, está documentado que el ácido salicílico interviene en los mecanismos de resistencia frente a nematodos formadores de nódulos y áfidos. Recientemente se ha descrito que, en Arabidopsis, el biotipo B de B. tabaci induce defensas activadas por este ácido e inhibe las del ácido...

  15. Obtention of Samarium and Gadolinium concentrates by solvent extraction using mono-2-ethylhexyl ester of 2-ethylhexyl phosphonic acid; Obtencao de concentrados de samario e gadolinio via extracao por solventes com o ester mono-2-etilhexil do acido 2-etilhexilfosfonico

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, Junior, Pedro

    1996-07-01

    The rare earth chlorides solution employed in this study, which is constituted by medium and heavy fractions, is derived from monazite processing accomplished by NUCLEMON-Mineroquimica (SP). This solution shows an acidity about 1.18 M and 189 g/L of rare earth oxides, containing as main constituents: Sm(34.55%), Gd(23.85%), Dy (6.82%), and Y (24.45%). It was used, as organic phase, 2-ethylhexyl phosphonic acid, mono-2-ethylhexylester diluted to 1 M in isododecane. (author)

  16. Acido tranexâmico e hemostasia em cirurgia de revascularização do miocárdio com circulação extracorpórea Tranexamic acid and hemostasis in myocardial revascularization with extracorporeal circulation

    Directory of Open Access Journals (Sweden)

    Guilherme F Vargas

    1992-12-01

    Full Text Available O antífibrinolítico sintético ácido tranexâmico (Transamin ® foi avaliado em seus efeitos hemostáticos e poupadores de transfusões homólogas, em pacientes submetidos a revascularização do miocárdio com circulação extracorpórea (CEC. Quarenta pacientes receberam placebo e 55 pacientes foram operados sob o efeito do ácido tranexâmico na dose de 10 g endovenosa no trans-operatório (2 g administrados na indução anestésica e os restantes 8 g nas 4 horas seguintes de cirurgia, de modo contínuo. O ácido tranexâmico, na dosagem utilizada, demonstrou possuir efeito hemostático impressionante, promovendo uma redução no débito pelos drenos torácicos da ordem de 47% nas 12 horas de P.O., 42,5% nas 24 horas de P. O. e 40,5% até a retirada dos drenos, em relação ao grupo-controle (pThe synthetic antif ibrinolytic drug tranexamic acid was evaluated in its hemostatic and blood saving effects, in patients submitted to myocardial revascularization with extracorporeal circulation. To 40 patients were administered placebo and to 55 tranexamic acid I.V. in a dosage of 10 g in the operative period (2 g in the anesthetic induction and the remaining 8 g in a continuous way during the operative procedure. Tranexamic acid, in this dosage, has proved to have a very impressive hemostatic effect, leadir g to a reduction in post operative bleeding of 47% in 12 h, 42,5% in 24 h and 40,5% when drains were taken off, related to the control group (p < 0.05. Tranexamic acid have led to less utilization for homologous paked red cells per patient, but statistical significance was found only in the 24 h of post operative period, with 1,025 units/patient in control group and 0,333 units/ patient in treated group. Concerning post operative complications, there have been more neurological alterations without sequelae (2.5% against 12.7% and creatinin alterations (5% against 10.9% in the tranexamic acid group. Such alterations were attributed to the high dosage used. As a conclusion, we do not recommend routine use of tranexamic acid to patients submitted to myocardial revascularization in the dosage of 10 g I.V., but, owing to the evident hemostatic effect of the drug, we recommend more investigations concerning the ideal dosage and way of administration.

  17. Influence of zeolite treated with sulphuric acid and sodium hydroxide on the coagulation-flocculation process of drainage. Influencia de la zeolita tratada con acido sulfurico y con hidroxido de sodio en el proceso de coagulacion floculacion en aguas superficiales

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Duque, M.; Herrera Vasconcelos, T.; Laria Piedra, N.

    1994-01-01

    The present paper has had as objective the treatment of natural zeolite from Tasajera with sulfuric acid and sodium hydroxide (residuals acid and basic from the regeneration of cationic and anionic resins of the ''Otto Parallada'' thermoelectric plant) at different times and concentrations, with a further comparison and testing of the effectiveness of the obtained zeolite in respect to the natural one as a coadyuvant of the coagulation-flocculation process in the treatment of superficial water. (Author)

  18. Obtention and characterization of acrylic acid-i-polyethylene organometallic copolymers with Mo, Fe, Co, Zn, and Ni; Obtencion y caracterizacion de copolimeros organometalicos de acido acrilico-i-polietileno, con Mo, Fe, Co, Zn y Ni

    Energy Technology Data Exchange (ETDEWEB)

    Dorantes, G.; Urena, F.; Lopez, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico); Lopez, R. [Universidad Autonoma del Estado de Mexico (Mexico)

    1997-07-01

    In this study a graft acrylic acid (AA) in low density polyethylene (PEBD) copolymers were prepared, using as reaction initiator, gamma radiation at different doses. These copolymers were coordinated with molybdenum, cobalt, iron, zinc and nickel. the obtained polymeric materials were characterized by conventional analysis techniques. It was studied the measurement parameter variation of the positron annihilation when they inter activated with this type of materials and so obtaining information about microstructure of these polymers. (Author)

  19. Exhaust lead-acid batteries recycling as a tool of the environmental protection policy. Energy, environmental and economic issues; Il riciclaggio delle batterie al piombo-acido esauste come strumento della politica di salvaguardia ambiental. Aspetti energetici, ambientali ed economici

    Energy Technology Data Exchange (ETDEWEB)

    Picini, P.; Battista, A. [ENEA, Divisione Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy)

    2001-07-01

    Lead is an heavy metal that has a major impact on human health and his removal from the environment is an important action for its protection. The aim of the present work is to provide a framework of the Italian lead recycling with respect to the economic and environmental aspects of COBAT activities (COBAT is the Mandatory Consortium to collect and recycle the exhaust lead-acid batteries and lead wastes). In order to better understand the context in which COBAT works, some statistical data on the lead production, consumption and end uses in Italy and in the world are provided. An estimate of the energy consumptions and the environmental impact related to Italian lead production was also carried out. [Italian] Il piombo e' uno dei metalli pesanti a maggiore impatto ambientale e sanitario e la sua rimozione dall'ambiente costituisce un'importante azione di protezione e tutela della salute umana. Lo scopo del presente lavoro e' quello di fornire un quadro di riferimento relativo al riciclaggio del piombo in Italia evidenziandone gli aspetti ambientali ed economici in relazione alle attivita' condotte dal COBAT (Consorzio Obbligatorio delle Batterie Esauste e dei rifiuti piombosi). In tal senso, per disporre di una visione piu' completa del contesto in cui si inserisce l'attivita' del Consorzio, vengono forniti alcuni dati di carattere statistico sulla produzione, sul consumo e sugli utilizzi del piombo in Italia e nel mondo e viene effettuata una stima dei consumi energetici e dell'impianto ambientale associati alla produzione di piombo nazionale.

  20. COMPOSICIÓN MOLECULAR DE ACIDOS HUMICOS EVALUADA MEDIANTE PIRÓLISIS -CROMATOGRAFIA DE GASES- MASAS E HIDRÓLISIS TÉRMICA ASISTIDA Y METILACIÓN, EN SUELOS ALTOANDINOS – COLOMBIA

    Directory of Open Access Journals (Sweden)

    Claudia Martinez

    2014-07-01

    Full Text Available Se determinó la composición  molecular de ácidos húmicos (AH, extraídos del horizonte A de suelos altoandinos, Colombia dedicados a tres usos: bosque primario, cultivo y pastura. Los AH se obtuvieron mediante extracción secuencial de la materia orgánica humificada (MOH con soluciones de tetraborato, pirofosfato e hidróxido de sodio (0,1N, y fueron purificados por diferentes procesos analíticos. Su composición molecular se determinó  por Py-GC/MS y THMA. Los diferentes productos de la pirolisis se clasificaron atendiendo a la familia química a la que pertenecen,  prevalecieron los ácidos grasos (FA como el producto más abundante en los AH de todos los usos, mientras que  los fenoles, esteroles, S-compuestos y terpenos se encontraron en menor abundancia. Se presentaron diferencias en los porcentajes de abundancia relativa de los grupos identificados, demostrando que el cambio de uso de suelo influye en las propiedades físicas, químicas y biológicas del suelo por lo que se perciben diferentes grados de transformación, que afectan la composición de los AH y su reactividad en el suelo.

  1. Relación de la carga ácida de la dieta y el estado acido-base en niños con Enfermedad Renal Crónica

    OpenAIRE

    Lugo, Gustavo; Moreno, Greysi; Marcano, Gilmary; López, Michelle

    2016-01-01

    La progresión de la Enfermedad Renal Crónica (ERC) es acelerada por la acidosis metabólica, la cual puede ser agravada por la dieta. El objetivo del presente trabajo fue determinar la Carga Acida Potencial Renal (CAPR) de la dieta en niños con ERC y establecer su relación con el estado ácido base. MÉTODOS: Se incluyeron 26 pacientes (10 meses-17 años) con ERC atendidos en la consulta del Servicio de Nefrología del Hospital de Niños JM de los Ríos entre Junio 2014 y Enero 2016. Para la evaluac...

  2. Exhaust lead-acid batteries recycling as a tool of the environmental protection policy. Energy, environmental and economic issues; Il riciclaggio delle batterie al piombo-acido esauste come strumento della politica di salvaguardia ambiental. Aspetti energetici, ambientali ed economici

    Energy Technology Data Exchange (ETDEWEB)

    Picini, P; Battista, A [ENEA, Divisione Caratterizzazione dell' Ambiente e del Territorio, Centro Ricerche Casaccia, S. Maria di Galeria, RM (Italy)

    2001-07-01

    Lead is an heavy metal that has a major impact on human health and his removal from the environment is an important action for its protection. The aim of the present work is to provide a framework of the Italian lead recycling with respect to the economic and environmental aspects of COBAT activities (COBAT is the Mandatory Consortium to collect and recycle the exhaust lead-acid batteries and lead wastes). In order to better understand the context in which COBAT works, some statistical data on the lead production, consumption and end uses in Italy and in the world are provided. An estimate of the energy consumptions and the environmental impact related to Italian lead production was also carried out. [Italian] Il piombo e' uno dei metalli pesanti a maggiore impatto ambientale e sanitario e la sua rimozione dall'ambiente costituisce un'importante azione di protezione e tutela della salute umana. Lo scopo del presente lavoro e' quello di fornire un quadro di riferimento relativo al riciclaggio del piombo in Italia evidenziandone gli aspetti ambientali ed economici in relazione alle attivita' condotte dal COBAT (Consorzio Obbligatorio delle Batterie Esauste e dei rifiuti piombosi). In tal senso, per disporre di una visione piu' completa del contesto in cui si inserisce l'attivita' del Consorzio, vengono forniti alcuni dati di carattere statistico sulla produzione, sul consumo e sugli utilizzi del piombo in Italia e nel mondo e viene effettuata una stima dei consumi energetici e dell'impianto ambientale associati alla produzione di piombo nazionale.

  3. Dosimetric influence of hyaluronic acid in patients with prostate cancer treated with RT3D; Influencia dosimetrica del acido hialuronico en pacientes cancer de prostata tratados con RT3D externa+HDR braquiterapia

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, J.; Vazquez, J. A.; Garcia Blanco, A. S.; Gomez, F.; Montejo, A.; Raba, J. I.; Pacheco, M. T.; Cardenal Carro, J.; Mendigueren, M. A.

    2013-07-01

    This study aims to assess the influence on dosimetry by the introduction of hyaluronic acid and assess the need for the realization of a second CT scan and consequent re-planning of RT3D treatment. (Author)

  4. Un nuevo Método para Mejorar el Proceso de Producción de Acido Bórico A New Method to Improve the Production Process of Boric Acid

    OpenAIRE

    Orlando J Domínguez; Emilio M Serrano; Jorge E Flores; Raquel L Michel

    2011-01-01

    En este trabajo se propone una modificación al proceso tradicional para obtener ácido bórico, con el agregado fraccionado del ácido lixiviante, para lograr un producto altamente soluble, como el pentaborato de sodio. Con esto se consigue la disolución del mineral en frío con menor cantidad de reactivo lixiviante, ahorrando así energía. Al líquido clarificado se le disminuye el pH logrando así la precipitación del ácido bórico. La ganga se agota con diferentes etapas de precipitación y filtrac...

  5. Influence of the temperature in the uranyl sorption in zirconium diphosphate modified with salicylic acid; Influencia de la temperatura en la sorcion de uranilo en difosfato de circonio modificado con acido salicilico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N.; Solis C, D. A. [Universidad Autonoma del Estado de Mexico, Facultad de Quimica, Paseo Colon y Paseo Tollocan s/n, 50000 Toluca, Estado de Mexico (Mexico); Ordonez R, E., E-mail: nidgg@yahoo.com.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (MX)

    2011-11-15

    In this work the experimental conditions were established to evaluate the uranium (Vi) sorption to 20 and 40 C on the surface of the zirconium diphosphate (ZrP{sub 2}O{sub 7}) modified with a solution of salicylic acid 0.1 M. The modification of the ZrP{sub 2}O{sub 7} was produced during the hydrate process, taking advantage that these are formed complexes between the carboxyl and hydroxyl groups of salicylic acid and amphoteric species of the interface solid/liquid. The method is used by lots to elaborate the isotherms that explain the behavior of this sorption in different ph conditions and temperature, the quantity of the uranium reaction is analyzed with the fluorescence technique. The results indicated that in the temperature increases the uranium sorption on the material and is more efficient to low ph values. (Author)

  6. Shyntesis and cytotoxicity evaluation in vitro of new compounds with hybrid structures of 8-flavoneacetic acid and quinolones; Sintesis y evaluacion citotoxica in vitro de nuevos compuestos con estructuras hibridas del acido 8-flavonacetico quinolonas

    Energy Technology Data Exchange (ETDEWEB)

    Biaa, M F; Castellano, J M; Emling, F; Schlick, E [Knoll, S.a., Madrid (Spain)

    1994-12-31

    Using the structural similarity between 8-flavoneacetic acid the antitumor quinolones, we have prepared some hybrid compounds on both systems and studied their cytotoxicity. None of the sinthesized compounds have shown sufficient interest for further development. 33 refs.

  7. Description and drawing of a mini-plant to lead-acid batteries active material production; Descricao e desenho de uma mini-planta piloto para producao de material ativo para baterias de chumbo-acido

    Energy Technology Data Exchange (ETDEWEB)

    D` Alkaine, C V; Mattos, J S.D.; Machado, D M; Nart, F C [Sao Carlos Univ., SP (Brazil). Dept. de Quimica

    1985-12-31

    As a part of the UFSCAR/Solar Energy/FINEP program, a pilot plant for the production of the active material for lead-acid batteries was developed. The basic operations are: milling and lead oxidation in ball mill, classifying of lead monoxide in the proper particle size by means of a cyclone, monoxide mixture with water and sulphuric acid, thus forming the paste. The paste is then placed on grids and finally scrapped and compacted. The plates pass through a 300 deg C oven and are cured in controlled atmosphere. (author). 4 refs

  8. {sup 1} H and {sup 13} C NMR studies on the enoling of 5-benzyl barbituric acids; Estudos por H-1 e C-13 RMN da enolizacao de acidos 5-benzil barbituricos

    Energy Technology Data Exchange (ETDEWEB)

    Villar, Jose Daniel Figueroa; Santos, Nedina Lucia dos; Cruz, Elizabete Rangel [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Quimica

    1992-12-31

    This work shows that the derivatives of the 5-benzyl barbituric acids hydroxylated at the ortho position of the aromatic ring only exist in the enol form. and that the alkylation of this hydroxyl gives products which exist mainly in the ketone form of the DMSO 5 refs., 2 figs., 2 tabs.

  9. ({sup 1} H, {sup 13} C and {sup 31} P) NMR of phosphonic acid derivatives; Ressonancia magnetica nuclear ({sup 1} H, {sup 13} C, {sup 31} P) de derivados do acido fosfonico

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Valdevino; Costa, Valentim E. Uberti [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Inst. de Quimica

    1992-12-31

    In the last years the development of phosphates analogues in the medical and agricultural pesticides has being very expressive. {sup 1} H, {sup 13} C and mainly {sup 31} P NMR are used for stereochemical and conformational analysis, and reactivity studies on the compounds resulting from those chemical processes 2 refs., 4 figs., 1 tab.

  10. NMR study of the epoxidation of liquid hydrolyzed poly-butadiene and meta-chloro-per-benzoic acid; Estudo atraves de RMN da reacao de epoxidacao de polibutadieno liquido hidroxilado (PBLH) e acido m-cloro perbenzoico (AMCPB)

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Marcelo [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Akcelrud, L [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica; Menezes, Sonia Cabral de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    1994-12-31

    This work presents a study concerning the selectivity of the different configurations of the double bond present in liquid hydrolyzed poly-butadiene towards the epoxidation reaction with meta-chloro-per-benzoic acid through hydrogen-1, carbon-13 NMR aiming the production of new materials, varying the epoxidation level 12 refs., 7 figs., 4 tabs.

  11. Effect of the humic acids in the adsorption of U (Vi) in a Mexican natural zeolite; Efecto de los acidos humicos en la adsorcion de U (VI) en una zeolita natural mexicana

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval G, H. A.; Lopez del R, H.; Davila R, J. I.; Mireles G, F., E-mail: hlopezdelrio@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

    2012-10-15

    The uranium adsorption was studied in a Mexican natural zeolite of the clinoptilolite type in presence and absence of humic acids (Ha). The adsorption kinetics of the binary U-zeolite and ternary U-Ha-zeolite systems were compared, and the effect of the humic matter impregnated in the zeolite in the uranium removal in function of the solution ph was studied. The experiments were made to environmental conditions and lightly acid ph, with fixed concentrations of uranium and Ha of 1 x 10{sup -5} M and 20 ppm, respectively, and a reason m/V of 5 mg/ml. The uranium adsorption in absence of Ha was of 96% and decreased to 45% in the ternary system U-Ha-zeolite. The data of the binary system U-zeolite were analyzed with three kinetic models of adsorption (pseudo-first order, pseudo-second order and Elovich). By means of non lineal regression was found that the uranium adsorption obeys a kinetic of pseudo-second order. It was observed that the uranium adsorption in the zeolite impregnated with Ha is favored to more ph at 5. (Author)

  12. Modification of zirconium diphosphate with salicylic acid and its effect on the uranium (Vi) sorption; Modificacion del difosfato de circonio con acido salicilico y su efecto sobre la sorcion de uranio (VI)

    Energy Technology Data Exchange (ETDEWEB)

    Almazan T, M. G.; Garcia G, N. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Simoni, E., E-mail: guadalupe.almazan@inin.gob.mx [Universidad Paris Sud, Instituto de Fisica Nuclear, Georges Clemenceau No. 15, Orsay (France)

    2014-10-15

    The surface of zirconium diphosphate (ZrP{sub 2}O{sub 7}) was modified with salicylic acid and its effect was evaluated on the uranium (Vi) sorption. The modified surface of the material was analyzed with different analytical techniques among which are included the atomic force microscopy, scanning electron microscopy and X-ray photoelectron spectroscopy. This analysis allowed showing that the salicylic acid is being held on the surface of the zirconium diphosphate. The reactivity of modified zirconium diphosphate compared with uranium (Vi) was investigated using the classical method of batch sorption. The analysis of sorption isotherms shows that the salicylic acid has an important effect in the uranium (Vi) sorption. According to the study conducted, the interaction among the uranium (Vi) and the surface of zirconium diphosphate modified with the salicylic acid most likely leads to the complexes formation of binary (U(Vi)/ZrP{sub 2}O{sub 7}) and ternary (U(Vi)/salicylate/ZrP{sub 2}O{sub 7}) surface. (Author)

  13. Bioethanol production by cashew apple bagasse (Anacardium occidentale L.): comparison of acid diluted and alkali pre-treatments; Producao de bioetanol a partir da fibra do caju (Anacardium occidentale L.): comparacao entre o pre-tratamento acido e alcalino

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Tigressa H.S.; Pinheiro, Alvaro D.T.; Goncalves, Luciana R.B. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil); Rocha, Maria V.P.; Macedo, Gorete R. de [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    Due to the growing environmental awareness on the negative impact resulting from utilization of fossil fuels, and in the search for renewable energy sources, biofuels' interest as Bioethanol has rapidly expanded recently. In this context, lignocellulosic compounds have become center of attention as an abundant and economic alternative source of carbohydrates for ethanol production. In this study, cashew's bagasse acid hydrolysis was initially studied for glucose synthesis and its fermentation towards ethanol production. Sulfuric acid concentration, solids concentration and time were some of the factors evaluated. The highest glucose productivity value (162,9 mg.g de bagaco{sup -1}) , was obtained for 0,6 mol.L{sup -1} of sulfuric acid in an autoclave at 121 deg C for 15 min. For the fermentation of the hydrolyzed material by S. cerevisiae containing 16 {+-} 2,0 g.L{sup -1} of glucose metabolic, the yield and productivity obtained were 0,63 g-g glucose{sup -1} and 1,43 g.L{sup -1}h{sup -1} respectively. Ethanol concentration after 6 h of fermentation of this hydrolyzed was 11 g.L{sup -1}. In the best conditions of acid hydrolysis, a second pre-treatment with diluted sulfuric acid was performed to evaluate availability of hemicelluloses at 160 deg C and 180 deg C. For comparative purposes, alkali pre-treatment was evaluated under the conditions of 0,6 mol.L{sup -1}, 30% p/v of bagasse thermically treated at 121 deg C for 15 minutes. However, concentration of sugars was not sufficient for fermentation. Also, nitrogen supplementation of the hydrolyzed fraction did not influence significantly ethanol production. The results demonstrate that the hydrolyzed fraction from the acid pre-treatment of cashew's bagasse could be utilized for ethanol production. (author)

  14. Study of stability of humic acids from soil and peat irradiated by gamma rays; Estudo da estabilidade de acidos humicos extraidos de solo e turfa, frente a radiacao ionizante gama

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Wilson Tadeu Lopes da

    1995-07-01

    Humic acids samples (one deriving from a sedimentary soil and other from a peat), in aqueous media, were irradiated with gamma rays, in doses of 10, 50 and 100 kGy, in order to understand their chemical behavior after the irradiation. The material, before and after irradiation, was analyzed by Elemental Analysis, Functional Groups (carboxylic acids and phenols), UV/Vis Spectroscopy (E{sub 4}/E{sub 6} ratio), IR spectroscopy, CO{sub 2} content and Gel permeation Chromatography (GPC) ). The Elemental Analysis showed the humic acid derived from a peat had a most percentage quantity of Carbon and Hydrogen than the material from a sedimentary soil. From the UV/Vis Spectroscopy, it was observed a decrease of E{sub 4}/E{sub 6} ratio with an increase of the applied dose. The data from GPC are in agreement with this. The results showed that the molecular weight of the material increased by exposing it to a larger radiolitical dose. The peat material was less affected by the gamma radiation than the soil material. The carboxylic groups were responsible by radiochemical behavior of the material. (author)

  15. Combustion synthesis by reaction and characterization of nano ferrites: study of fuel aniline, citric and its mixture; Sintese por reacao de combustao e caracterizacao de nanoferritas Ni-Zn: estudo dos combustiveis anilina, acido citrico e sua mistura

    Energy Technology Data Exchange (ETDEWEB)

    Silva, M.C. da; Coutinho, J.P.; Costa, A.C.F.M., E-mail: normanda@ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Engenharia de Materiais; Freitas, N.L. de [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Tecnologia do Desenvolvimento

    2012-07-01

    The present study aims to evaluate the influence of aniline and citric acid used alone and combined in a ratio of 50% each in the characterization of NiZn ferrite synthesized by combustion reaction method in a muffle furnace. Measurements were made of temperature and reaction time. The nano-powders were characterized by XRD, EDX, textural analysis and SEM. The highest temperature was achieved by the reaction using the mixture of fuel and increased reaction time using citric acid. The nano ferrites using different fuels, and the mixture changed phases, the crystallite size and decreased surface area of the samples with aniline, citric acid and a mixture of both, respectively. The powder morphology ranged from presenting the formation of irregular blocks for the use of citric agglomerated in the form of skeins with aniline and a mixture to agglomerate larger particles. (author)

  16. Influence of reason citric acid/ metal cations in the synthesis of mullite by Pechini Method; Iinfluencia da razao acido citrico/cations metalicos na sintese de mulita pelo Metodo Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Braga, A.N.S.; Costa, D.L.; Farias, R.M.C.; Neves, G.A.; Lira, H.L.; Menezes, R.R., E-mail: Alluskynha@homail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Departamento de Engenharia de Materiais

    2014-07-01

    Mullite is a ceramic material with high technological applications. Its synthesis has been extensively studied due to their excellent properties. Thus, this paper proposes to obtain mullite by Pechini method. The amount of acid citric/metal cations in proportions of 3:1 and 1:1 were investigated in order to understand their influence in obtaining the mullite phase. The synthesized samples were characterized by X-ray diffraction (XRD) and thermal analysis (TG/DTG and DTA). The results showed that the ratio citric acid/metal cations influence on the formed phase with the mullite obtained only in proportion 1:1. With the increase of the ratio to 3:1 was observed the formation of the alumina layer. (author)

  17. Influence of several nonferrous metals in the treatment of residual liquors from hydrochloric acid pickling processes. Influencia de diversos metales no ferreos en el tratamiento de lejias residuales de decapado con acido clorhidrico

    Energy Technology Data Exchange (ETDEWEB)

    Negro, C.; Cobos, M.A.; Latorre, R.; Dufour, J.; Formoso, A.; Lopez, F.

    1994-01-01

    In the oxiprecipitation of waste liquors from siderurgical processes of pickling with hydrochloric acid, several kinds of iron oxides and oxihydroxides are obtained: alpha-FeOOH, gamma-FeOOH, Fe[sub 3]O[sub 4], gamma-Fe[sub 2]O[sub 3]. Fe[sub 2]O[sub 3].1,2H[sub 2]O, etc. These products can be used like pigments in the painting industry and like raw materials for the obtaining of ferrites. Varying the operation conditions, the presence of these products can be changed greatly, obtaining different mixtures of them. The presence of non-ferrous metals catalyzes and modifies the mechanism of the reaction, yielding pure products. This simplifies their later industrial applications. The aim of this work is to determine the influence of Cu(II), Zn(II), Mo(VI) and Al(III) on the oxiprecipitation of residual liquors from hydrochloric acid pickling processes, selecting the most favourable operation conditions at which it is possible to obtain products for industrial applications.

  18. Synthesis and reactions with a midines of derivates cycles and of open chain of 2-bromo-3, 4-dioxobutanoic; Sintesis y reacciones con amidinas de derivados ciclicos y de cadena abierta del acido 2-bromo-3, 4-dioxobutanoico

    Energy Technology Data Exchange (ETDEWEB)

    Ancos, B. de; Delgado, F.; Martin, M.R. [Departamento de Quimica Organica, Facultad de Ciencias, Universidad Autonoma, Madrid (Spain)

    1995-12-31

    Bromination of enaminoesters 1 and 5, in appropriate conditions, affords in good yield enamines of the corresponding 2-bromo-3.4-dioxobutanoic acid derivatives 2-3 and 6 or dibromocompounds 4 and 6. The open chain enaminoesters (1-3) are more easily hydrolyzed that enaminofuranones 5 and 6. Prolongated treatment of 6 with hydrochloric acid affords the chlorinated enamine 11. The synthesis of 3-Bromo-4-hydroxy-5-methoxyfuran-2(5H)-one 10 can be achieved by bromination of 12, obtained by hydrolysis of 5. The reaction of methyl 3-bromo-4, 4-dimethoxy-3-oxobutanoate with amidines is a good method for the synthesis of 5-bromo-6-(dimethoxymethyl) pyrimidine-4(3H)-ones substituted at 2 position. Under the same conditions the reaction of furanone 10 with benzamide does not lead to the corresponding imidazoline. (Author) 12 refs.

  19. Influence of zeolite treated with sulphuric acid and sodium hydroxide on the coagulation-flocculation process of drainage. Influencia de la zeolita tratada con acido sulfurico y con hidroxido de sodio en el proceso de coagulacion floculacion en aguas superficiales

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Duque, M; Herrera Vasconcelos, T; Laria Piedra, N

    1994-01-01

    The present paper has had as objective the treatment of natural zeolite from Tasajera with sulfuric acid and sodium hydroxide (residuals acid and basic from the regeneration of cationic and anionic resins of the ''Otto Parallada'' thermoelectric plant) at different times and concentrations, with a further comparison and testing of the effectiveness of the obtained zeolite in respect to the natural one as a coadyuvant of the coagulation-flocculation process in the treatment of superficial water. (Author)

  20. Influence of citric acid as setting retarder in CPV portland cement pastes and mortars; Influencia do acido citrico como retardador de pega em pastas e argamassas de cimento portland CPV ARI

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, B.C.; Lopes, M.M.S.; Alvarenga, R.C.S.S.; Fassoni, D.P.; Pedroti, L.G. [Universidade Federal de Vicosa (UFV), MG (Brazil); Azevedo, A.R.G. de, E-mail: afonso.garcez91@gmail.com [Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF), Campos dos Goytacazes, RJ (Brazil)

    2016-07-01

    This work aims to study the availability of using and the influence of citric acid in the properties of pastes and mortars made with Portland cement CPV ARI both in fresh and hardened form. The citric acid dosages were 0, 0.4%, and 0.8% relative to the cement mass. The produced cement pastes were tested to determine normal consistency water and initial and final setting times. Mortars were tested to determine the consistency index, specific gravity, air entrained content in the fresh stage, hardened bulk density, compressive strength at ages 7, 14, and 28 days, and analysis by XRD technique. The results show that citric acid, besides improve the mortar workability, contribute to an increase in mechanical strength in older than 14 days. (author)

  1. Preparation and characterization of a composite based on Zr(IV) and phosphoric acid; Preparacao e caracterizacao de um composito a base de Zr(IV) e acido fosforico

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, T.F.S. da; Carmo, D.R. do, E-mail: taylafserantoni@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia. Departamento de Fisica e Quimica

    2014-07-01

    The present work describes the preparation and characterization of a composite formed from zirconium (IV) isopropoxide and phosphoric acid (ZrP). This composite (ZrP) was characterized by techniques such as infrared spectroscopy (FTIR), {sup 13}C and {sup 31}P nuclear magnetic resonance (NMR), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS) and thermogravimetric analysis (TG). Vibrational spectrum for ZrP showed a band at ∼ 1010 cm{sup -1} assigned to the stretching P=O(νP=O). The results obtained by EDS confirmed the presence of elements Zr, P and O in the formed composite, and any C has been detected in concordance of NMR of {sup 13}C. The {sup 31}P NMR spectrum of ZrP showed two pronounced peaks characteristic of zirconium phosphate. In the TG curve three steps of weight loss were observed for ZrP. (author)

  2. Effect of organoclays content and modify the impact on mechanical properties of of bionanocomposites poly (lactic acid ) - PLA; Efeito do teor de argilas organofilicas e modificador de impacto nas propriedades mecanicas de bionanocompositos de poli (acido latico)-PLA

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcanti, Shirley N.; Alves, Amanda M.; Agrawal, Pankaj; Silva, Moacy P. da; Araujo, Aylanna P.M.; Araujo, Edcleide M.; Melo, Tomas J.A., E-mail: shirleynobre@gmail.com [Universidade Federal de Campina Grande (UFCG), Campina Grande, PB (Brazil). Departamento de Engenharia de Materiais

    2015-07-01

    Until recently, it has become important to develop more durable plastic materials to meet the needs of the market, which have wide range of applications. But these materials are from non-renewable sources cause environmental impact due to the large amount of waste they produce. In order to evaluate the effect of organoclay (Brasgel PA and vermiculite) and impact modifier (EMA-GMA) were developed PLA bionanocomposites / Clays through the merge process by melting and rated the content (1, 3 and 5pcr) the mechanical properties of these clays. The clays were organophilizated using a percentage of surfactant based on the capacity of cation exchange. The bionanocomposites were prepared by extrusion followed the injection molding step of the specimens. The clays were characterized by X-ray diffraction (XRD).The bionanocomposites were characterized by the mechanical properties of impact and traction. The techniques of X-ray diffraction showed that organophilization process used was efficient. The mechanical properties were changed, and the impact strength showed considerable gain when the PLA was blended with the copolymer and the organoclay. (author)

  3. Characterization of commercial ceramic adsorbents and their application on naphthenic acids removal of petroleum distillates; Caracterizacao de adsorventes ceramicos comerciais e sua aplicacao na remocao de acidos naftenicos de destilados de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Silva, J.P.; Senna, L.F. de; Lago, D.C.B. do; Silva Junior, P.F. da; Figueiredo, M.A.G. de; Dias, E.G. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)], e-mail: julia_psi@yahoo.com.br; Chiaro, S.S.X. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2006-07-01

    One denominates 'naphthenic acids' to the mixture of carboxylic acids that is present in petroleum oil, and is directly responsible for its acidity and corrosiveness in liquid phase during the refine process. These acids are also presents in distilled fraction of petroleum, causing several problems in final products quality. A possible way to remove them from petroleum distilled fractions is the adsorption in porous materials. However, the published results indicate that ion exchange resins would be the best adsorbents for this process, which would probably increase its cost. In this work, two commercial adsorbents (clay and activated alumina) were characterized by a set of physical-chemistry techniques and evaluated concerning their capacity of removing naphthenic acids from a light petroleum fraction. It was also verified the influence of a previous thermal treatment to the adsorption in their physical-chemistry characteristics and its properties. (author)

  4. Preparation and characterization of sulfated zirconia acid catalysts for application in the esterification of cottonseed oil; Preparacao e caracterizacao de catalisadores acidos de zirconia sulfatada para aplicacao na esterificacao do oleo de algodao

    Energy Technology Data Exchange (ETDEWEB)

    Silva, F. N.; Moura, T. F. B.; Silva, A.S.; Costa, A.C.F.M., E-mail: fnilson.s@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Pos-graduacao em Engenharia de Materiais; Pallone, E.M.J.A. [Universidade de Sao Paulo (USP), Pirassununga, SP (Brazil). Dept. de Ciencias Basicas

    2017-07-15

    This work aimed to produce zirconia by combustion synthesis, to analyze the structure and morphology comparatively with a commercial monoclinic ZrO{sub 2} , as well as, to investigate the sulfation, aiming to obtain acid catalysts for its use in the esterification of cotton oil for biodiesel. The samples were characterized by X-ray diffraction, scanning electron microscopy (SEM), specific surface area by BET method, infrared spectroscopy (FTIR), thermal analysis (TG/DrTG/DTA), granulometric distribution, pH and chromatography. The synthesized sample evidenced the formation of the monoclinic phase with traces of the orthorhombic phase, while in the commercial sample only the monoclinic phase was observed. In the sulfation process, traces of the tetragonal phase, typical of sulfated zirconia, were observed with the presence of the monoclinic phase in the two samples. With the impregnation of the sulfate ion on the surface of the samples, an increase in the particle size was observed, as seen in the characterization of BET, granulometric distribution and SEM, which also indicated a homogeneous morphology consisting of fine particles of approximately spherical shape for both samples. The chromatography indicated conversion of 65.5 and 91.8% in methyl esters to the synthesized and commercial SO{sub 4} {sup 2-}/ZrO{sub 2} , respectively. The results indicated that the sulfation increased the acidity, which was evidenced by the decrease in the pH, ranging from 5.12 to 2.65, which contributed significantly to the increase of the conversion, indicating that the SO{sub 4} {sup 2-}/ZrO{sub 2} is a promising catalyst in the esterification. (author)

  5. Evaluation of the physicochemical properties of structured materials: metallic, polymeric and ceramic, for the treatment of sour gases; Evaluacion de las propiedades fisicoquimicas de materiales estructurados: metalico, polimerico y ceramico, para el tratamiento de gases acidos

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, A.; Chavez, R. H. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Olea, O.; Solis, D., E-mail: rosahilda.chavez@inin.gob.mx [Universidad Autonoma del Estado de Mexico, Facultad de Quimica, Cerro de Coatepec s/n, Ciudad Universitaria, 50100 Toluca, Estado de Mexico (Mexico)

    2013-07-01

    in this work the physicochemical properties of three structured materials: metallic, polymeric and ceramic, from Sulzer Brothers Limited brand, are studied in order to removal sour gases, by absorption process, in aqueous solution of Monoethanolamine (Mea), at 30% weight. Mechanical properties, chemical composition, morphology and corrosion resistance were determined, using different characterization techniques, such as: 1) mechanically, according to standard procedures Astm E-384-1990, 2) chemically, by the corrosion resistance in the presence of an electrochemical cell, in aqueous solution of H{sub 2}SO{sub 4}, 1 N by Astm G-5-1999, 3) morphologically by scanning electron microscopy technique, and 4) efficiency of separation, by the gas chromatography technique in order to determine the chemical absorption of CO{sub 2} by Mea. The ceramic material was the hardest with 700 Hk value and tensile strength of 90 MPa, likewise showed resistance to corrosion of 10.28 m py, separation efficiency of 74% CO{sub 2}, at 10 minutes. The metallic material had a hardness of 190 Hk and it was the most resistant of tension, with 831 MPa, and corrosion resistance of 780.4 x 10{sup -6} m py, likewise promoted CO{sub 2} separation efficiency of 90% during the evaluation. The polymeric material presented hardness of 20 Hk and 35 MPa and it was not suffered surface change with electrochemical attack, with 282.4 x 10{sup -6} m py, and separation efficiency of 88%. Therefore the polymer was the most ductile, with smooth surface and greater resistance with H{sub 2}SO{sub 4}. The metal material was more resistant to plastic deformation and more corrugated surface and the second resistance in the presence of acid medium in aqueous solutions. For all the above, the metallic material is recommended by its greater separation in the reduction of acid gases and the polymer due to its greater chemical resistance. (Author)

  6. Phosphorus in chronosequence of burnt sugar cane in Brazilian cerrado: humic acid analysis by {sup 31}P NMR; Fosforo em cronossequencia de cana-de-acucar queimada no cerrado goiano: analise de acidos humicos por RMN de {sup 31}P

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, Celeste Q.; Pereira, Marcos G.; Garcia, Andreas C., E-mail: mgervasiopereira@gmail.com [Universidade Federal Rural do Rio de Janeiro (UFRRJ), Seropedica, RJ (Brazil). Dept. de Solos; Perin, Adriano; Gazolla, Paulo R. [Instituto Federal de Educacao, Ciencia e Tecnologia Goiano, Rio Verde, GO (Brazil); Gonzalez, Antonio P. [Universidade de Coruna, ES (Spain). Faculdad de Ciencias

    2013-10-01

    The aim of this study was to identify, with the use of {sup 31}P NMR spectroscopy, organic P species in humic acids (HA) in samples from Oxisol cultivated in chronosequence with sugar cane, pasture and Cerrado. The main forms of P-type found were orthophosphate, monoester-P (phosphate sugars) and P-diester (orthophosphate). The {sup 31}P NMR technique proved capable of identifying changes in the areas studied as a function of sugar cane burning time. In areas with 1 and 5 years of burnt cane, a decrease in recalcitrant organic P in humic acids indicated the need for use of P-humic substances for plant nutrition (author)

  7. Synthesis and characterization of chitosan-graft-poly(acrylic acid)/rice husk ash hydrogels composites; Sintese e caracterizacao de hidrogeis compositos de cinza da casca de arroz e quitosana enxertada com poli(acido acrilico)

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Francisco H.A. [Universidade Estadual Vale do Acarau - UVA, Sobral, CE (Brazil); Lopes, Gabriel V.; Pereira, Antonio G.B.; Fajardo, Andre R.; Muniz, Edvani C. [Universidade Estadual de Maringa - UEM, PR (Brazil)

    2011-07-01

    According to environmental concerns, super absorbent hydrogel composites were synthesized based on rice husk ash (RHA), an industrial waste, and Chitosan-graft-poly(acrylic acid). The WAXS and FTIR data confirmed the syntheses of hydrogel composites. The effect of crystalline or amorphous RHA on water uptake was investigated. It was found that the RHA in crystalline form induces higher water capacity (W{sub eq}) of composites hydrogels due to the fact that the intra-interactions among silanol groups on RHA make available new sites in the polymer matrix, which could interact to water. (author)

  8. Evaluation of human dental loss caused by carbamide peroxide bleacher compared with phosphoric acid conditioning - radioactive method; Avaliacao da perda dental humana com o uso do clareador peroxido de carbamida comparado ao condicionamento com acido fosforico - metodo radiometrico

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, Eduardo Makoto; Yousseff, Michel Nicolau [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Dentistica; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Lab. de Analise por Ativacao Neutronica

    2002-07-01

    The radiometric method was applied to the evaluation of dental loss caused by carbamide peroxide when it is applied on the surface layers of enamel and dentin tissues. Also the dental loss caused by the etching with 37% phosphoric acid procedure used in aesthetic restoration was assessed for comparison with those results obtained. The tooth samples irradiated with a P standard in a thermal neutron flux of the nuclear reactor were placed in contact with 10% carbamide peroxide or with 37% phosphoric acid solution. The radioactivity of {sup 32} P transferred from the radioactive teeth to the bleaching gel or to etching acid was measured using a Geiger Muller detector to calculate the mass of P removed in this treatment and losses were calculated after obtaining their P concentrations. Results obtained indicated that enamel and dentin exposed to carbamide peroxide bleaching agent lose phosphorus. The extent of enamel loss was smaller than that obtained for dentin. In the case of acid etching, there was no difference between the results obtained for enamel and dentin loss. Also the dentin loss obtained after a treatment of 30 applications of 10% carbamide peroxide was the same magnitude of that one application of 37% phosphoric acid. (author)

  9. Preparation of polymer blends from glycerol, fumaric acid and of poly(ethylene terephthalate) (PET) recycled; Preparacao de blendas polimericas a partir do glicerol, acido fumarico e do politereftalato de etileno (PET) pos consumo

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Marina A.O.; Guimaraes, Danilo H.; Brioude, Michel M.; Jose, Nadia M. [Instituto de Quimica, Universidade Federal da Bahia, Salvador, BA (Brazil); Prado, Luis A.S. de A. [Institut fuer Kunststoffe und Verbundwerkstoffe - Technische Universitaet Hamburg-Harburg, Hamburg (Germany)

    2011-07-01

    Polymer blends based on recycled poly(ethylene terephthalate) (PET) and poly(glycerol fumarate) polyesters were prepared in different PET concentrations. The PET powder was dispersed during the poly(glycerol fumarate) synthesis at 260 deg C. The resulting blends were characterized by X-ray diffraction. The thermal stability of the materials was evaluated by thermogravimetric analysis and differential scanning calorimetry. The morphology was studies by scanning electron microscopy. The blends were clearly immiscible. The possibility of (interfacial) compatibilization of the PET domains, caused by transesterification reactions between PET and glycerol were discussed. (author)

  10. Preparation and characterization of polymer blends based on recycled PET and polyester derived by terephthalic acid; Preparacao e caracterizacao de blendas polimericas a base de PET reciclado e poliester derivado do acido tereftalico

    Energy Technology Data Exchange (ETDEWEB)

    Ohara, L.; Miranda, C.S.; Fiuza, R.P.; Luporini, S.; Carvalho, R.F.; Jose, N.M., E-mail: leandro.ohara@gmail.co [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais

    2010-07-01

    Environmentally friendly materials, made from industrial waste, are being increasingly used as a solution to the growing amount of waste generated by society, but also as a cheaper alternative to replace conventional materials for use in construction. In this work were investigated the properties of polymer blends based on recycled PET and a polyester derived from terephthalic acid and glycerin, a co-product of biodiesel. The samples were characterized by XRD, TGA, DSC, FTIR and SEM. The polyester synthesized showed a degradation event near 300 deg C. The blends with higher ratio of PET showed thermal behavior similar to pure PET. The X-ray diffraction showed that the polymer blends are semicrystalline materials. The micrographs presents the presence of a smooth surface, indicating the possibility of miscibility between the arrays. Therefore, the blending makes possible the fabrication of low-cost materials with applications in several areas. (author)

  11. Polymeric blends from post-consumer PET and polyester becoming of glycerol and phthalic acid; Misturas polimericas a partir do PET pos-consumo e poliesteres derivados do gliceraol e acido ftalico

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, C.S.; Brioude, M.; Fiuza, R.P.; Luporini, S.; Carvalho, R.F.; Jose, N.M., E-mail: cleidienesm@gmail.co [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais

    2010-07-01

    Preparation of physical mixture or polymer blends is a very important method to obtain a final product with excellent balance of properties, where one component can compensate for the poor property of another, and is often a modified low cost compared to development and synthesis of a new polymer. PET has become a major waste of post-consumer plastics and aiming to remedy this problem, this work aims to obtain blends from recycled PET and polyesters derived from glycerol and phthalic acid. The material with higher proportion of PET showed better thermal properties, observed by TGA and DSC, with a similar profile of pure PET. In XRD analysis showed a semicrystalline, while the SEM is a smooth surface on all materials, characteristic of pure polyester. The ratio of 50% its surface showed a probable immiscibility of polymers. (author)

  12. The elution of erbium from a cation exchanger bed by means of the N-hydroxyethyl-ethylene-diamine triacetic acid; Mecanismo de la elucion del erbio en un cambiador cationico con el acido n-hidroxietil-etilen-diamono-triacetico

    Energy Technology Data Exchange (ETDEWEB)

    Amer Amezaga, S

    1963-07-01

    A physicochemical study of the phenomena resulting when erbium is eluted from a cation-exchanger bed at a steady by means of the N-hydroxyethyl-ethylene-diamine-triacetic acid (HEDTA) is made. Two different retaining beds are used, a hydrogen bed, in which no ammonium passes through, and a zinc bed, which leaks ammonium ion. Good agreement between experimental and calculated values by using the equations deduced for the concentrations of the main species has been achieved, with errors around 1-2% in most of the experiments. (Author) 69 refs.

  13. Cyclopentenyl acids from sapucainha (Carpotroche brasiliensis Endl, Flacourtiaceae): the first antileprotic used in Brazil; Acidos ciclopentenicos do oleo da sapucainha (Carpotroche brasiliensis Endl, Flacourtiaceae): o primeiro antileprotico usado no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Adriana S.; Lima, Joselia A.; Rezende, Claudia M.; Pinto, Angelo C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Tecnologia. Inst. de Quimica]. E-mail: crezende@iq.ufrj.br

    2009-07-01

    The chaoolmugra oil is one of the oldest medicines used for leprosy until the development of sulfas. In Brazil, it is known as sapucainha oil that is obtained from Carpotroche brasilienesis seeds (Flacourtiaceae). Chemical and medicinal studies of sapucainha oil were introduced in Brazil by Peckolt, Cole and Cardoso which showed that major ciclopentenyl fatty acids as chaulmoogric, hydnocarpic and gorlic were responsible for its bactericidal activity. In this work, a method for quantification of sapucainha oil acidic fraction by HRGC was established using methyl n-heptadecanoate as internal standard. The oil chemical stability was investigated by the use of GC-MS, IR, {sup 1}H and {sup 13}C NMR and showed that the main degradation products belong to the cyclopentenyl moiety oxidation. (author)

  14. Compósitos Bioativos Obtidos a Partir da Inserção de Vidro Bioativo em Matriz de Poli(Metacrilato de Metila Bioactive Composites Obtained from Bioactive Glass Particles into Poly(Methyl Methacrylate

    Directory of Open Access Journals (Sweden)

    Paulo E. Silva Junior

    2001-09-01

    Full Text Available Várias biocerâmicas são capazes de se ligarem a tecidos vivos (bioatividade, no entanto apresentam propriedades mecânicas muito diferentes daquelas exibidas por tecidos naturais. Tal fato acaba por restringir o uso desses materiais em um mais extenso número de aplicações biomédicas. Compósitos de matriz polimérica reforçada com uma fase bioativa podem combinar o comportamento bioativo característico de algumas biocerâmicas com propriedades mecânicas próximas à de tecidos humanos. O presente trabalho tem como objetivo sintetizar e caracterizar compósitos de matriz polimérica reforçada por partículas de vidro bioativo. Os compósitos foram produzidos a partir da polimerização em massa de metacrilato de metila na presença de partículas de vidro bioativo (vidro de silicato de cálcio, fósforo e sódio. Partículas de vidro foram adicionadas ao monômero em diversas concentrações para permitir a variação das propriedades mecânicas e da bioatividade desses compósitos. A bioatividade dos materiais produzidos foi avaliada através de testes in vitro realizados a 37ºC em uma solução simuladora do fluido humano por períodos de tempo de 0 hora a 30 dias. Em seguida, os compósitos submetidos aos testes in vitro foram caracterizados por espectroscopia de infravermelho. O procedimento de síntese mostrou-se eficaz na produção de compósitos com diferentes frações volumétricas de partículas distribuídas homogeneamente pelo material. Os resultados dos testes in vitro revelaram a deposição de uma camada de hidroxiapatita carbonatada (HCA na superfície dos materiais, comprovando a bioatividade dos compósitos. Foi ainda observado que a cinética de deposição da camada de HCA pode ser controlada pela fração volumétrica da fase bioativa.Some bioceramics have the ability to bind to tissues but they show mechanical properties very different from the ones of natural tissues. This fact restricts the use of these materials in a wider range of applications. The goal of this research is to synthesize and characterize polymer matrices reinforced with bioactive glass particles that potentially can combine ability to bond to tissues (bioactivity, with mechanical properties comparable to damage tissues. The composites were produced by bulk polymerization of methyl methacrylate in the presence of bioactive glass particles and an initiator at 60ºC. Bioactive glass particles were added to the monomer in several concentrations to modify the mechanical properties and bioactivity of the composites. The bioactivity of the materials was evaluated by in vitro tests performed at 37ºC in a simulated body fluid for periods of time ranging from 1 hour to 30 days. The composites submitted to in vitro tests were characterized by infrared spectroscopy. The results revealed the deposition of a hidroxy-carbonate-apatite layer on the surface of the composites, confirming their bioactivity. It was also observed that the fraction of the bioactive phase in the composites can be used to control the overall kinetics of the bioactivity process.

  15. Study of film graphene/graphene oxide obtained by partial reduction chemical of oxide graphite; Estudo de filme de grafeno/oxido de grafeno obtido por reducao quimica parcial do oxido de grafite

    Energy Technology Data Exchange (ETDEWEB)

    Gascho, J.L.S.; Costa, S.F.; Hoepfner, J.C.; Pezzin, S.H., E-mail: juliagascho@hotmail.com [Universidade do Estado de Santa Catarina (UDESC), Joinville, SC (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2014-07-01

    This study investigated the morphology of graphene/graphene oxide film obtained by partial chemical reduction of graphite oxide (OG) as well as its resistance to solvents. Films of graphene/graphene oxide are great candidates for replacement of indium oxide doped with tin (ITO) in photoelectric devices. The OG was obtained from natural graphite, by Hummer's method modified, and its reduction is made by using sodium borohydride. Infrared spectroscopy analysis of Fourier transform (FTIR), Xray diffraction (XRD) and scanning electron microscopy, high-resolution (SEM/FEG) for the characterization of graphene/graphene oxide film obtained were performed. This film proved to be resilient, not dispersing in any of the various tested solvents (such as ethanol, acetone and THF), even under tip sonication, this resistance being an important property for the applications. Furthermore, the film had a morphology similar to that obtained by other preparation methods.(author)

  16. Nanocomposite biofilms obtained from Whitemouth croaker (Micropogonias furnieri) protein isolate and Montmorillonite: evaluation of the physical, mechanical and barrier properties; Biofilmes nanocompositos obtidos de isolado proteico de corvina (Micropogonias furnieri) e Montmorilonita: avaliacao das propriedades fisicas, meanicas e de barreira

    Energy Technology Data Exchange (ETDEWEB)

    Cortez-Vega, William Renzo, E-mail: williamvega@ufgd.edu.br [Universidade Federal da Grande Dourados (UFGD), MS (Brazil). Fac. de Engenharia; Bagatini, Daniela Cardozo; Souza, Juliana Tais Andreghetto de; Prentice, Carlos, E-mail: danielabagatini@hotmail.com, E-mail: ju.andreghetto@hotmail.com, E-mail: dqmprent@furg.b [Universidade Federal do Rio Grande (FURG), RS (Brazil). Escola de Quimica e Alimentos

    2013-06-15

    The objective of this study was to evaluate the properties of nanocomposite biofilms based on Whitemouth croaker (Micropogonias furnieri) protein isolate with organophilic clays. Initially the croaker protein isolate (CPI) was obtained using the pH shifting process from by-products of croaker industrialization. A Box and Behnken experimental design was used to develop the films, with three levels of CPI (2, 3.5 and 5 g.100 g{sup -1} solution), montmorillonite MMT clay (0.3, 0.5 and 0.7 g.100 g{sup -1} solution) and glycerol (25, 30 and 35 g.100g{sup -1} CPI). The polymeric films were produced by the 'casting technique'. The tensile strength values ranged from 7.2 to 10.7 MPa and the elongation values from 39.6 to 45.8 %. The water vapor permeability (WVP) values ranged from 3.2 to 5.5 (g.mm.m{sup -2}.d{sup -1}) and the CPI had an average protein content of 97.87 % protein (d. b.). It was concluded that the nanocomposite films produced from CPI with MMT were promising from the standpoint of their mechanical properties, visual appearance and easy handling, as well as for their low water vapor permeability and low water solubility. With respect to their mechanical properties, the concentrations of CPI and MMT were the main factors influencing the development of the nanocomposite films. The results obtained from the experimental design indicated that 3.5 g of CPI.100 g{sup -1}solution, 0.5 g of MMT.100 g{sup -1} solution and 30 g of glycerol.100 g{sup -1} CPI would be the ideal parameters for the development of nanocomposite films by 'casting'. (author)

  17. Estudo da densidade de ligações Cruzadas em géis superabsorventes obtidos do acetato de celulose Study of the crosslinking density in superabsorbent gels obtained from cellulose acetate

    Directory of Open Access Journals (Sweden)

    André M. Senna

    2013-01-01

    Full Text Available Neste trabalho foram realizadas sínteses de géis derivados de acetato de celulose (AC com grau de substituição (GS 2,5 por intermédio de reações de reticulação via esterificação. Os grupos hidroxílicos livres do AC foram reagidos com o dianidrido do ácido 1, 2, 4, 5 benzenotetracarboxílico (PMDA em meio homogêneo. As caracterizações foram realizadas por TGA (Análise termogravimétrica, espectroscopia na região do infravermelho (FTIR, retro titulação para determinar o grau de substituição do AC e microscopia de força atômica (AFM. Os géis foram sintetizados com as seguintes razões estequiométricas: [1:1], [1:2/3], [1:3] e [3:1] mol de PMDA/mol de OH livre respectivamente. A base da teoria de Flory-Rehner foi empregada para determinar ligações cruzadas nos géis. Os resultados de AFM mostram topografias distintas quando são comparados os géis entre si e quando os géis são comparados ao polímero de acetato de celulose. Este trabalho foi motivado pela importância tecnológica de polímeros de fontes renováveis como a celulose, em que um derivado de celulose foi usado para obter um polímero promissor para liberação controlada de medicamentos e adsorção de metais pesados em meio aquoso. Uma das vantagens deste polímero derivado do acetato de celulose é o emprego de poucas etapas na sua síntese.This work reports the synthesis of gels derived from cellulose acetate (CA with degree of substitution (DS 2.5 through esterification and crosslinking reactions. The free hydroxyl groups were reacted by using dianhydride of acid 1,2,4,5 benzenotetracarboxylic (PMDA as modifier in a homogeneous media. Characterization was performed with Thermogravimetric Analysis (TGA, Fourier Transform Infrared Spectroscopy (FTIR, retrotitration (known as back titration to determine the degree of substitution of AC and atomic force microscopy (AFM. The gels were synthesized with the following stoichiometric ratios: [1:1], [1:2/3], [1:3] and [3:1] PMDA mol/mol of free OH, respectively. A gel was synthesized in excess of 200% of PMDA in relation to free OH groups of the AC. The basis of the Flory-Rehner theory was used for determining crosslinking in the gels. Briefly, the main results showed that the crosslinking density increased proportionally to the amount of PMDA added to the reaction medium. Distinct AFM topographies were obtained for distinct gels, which were also different from the polymer cellulose acetate. This work was motivated by the technological importance of polymers from renewable sources such as cellulose, in which a cellulose derivative was developed with promising application in drug delivery and in adsorption of heavy metals in aqueous systems. The advantage of this cellulose acetate derivative is the use of fewer steps in its synthesis.

  18. Estudo comparativo da resistência do fio de algodão obtido em fiação piloto e em fiação industrial Correlation between laboratory and industrial cotton yarn strength

    Directory of Open Access Journals (Sweden)

    José Fernando Lazzarini

    1972-01-01

    Full Text Available O estudo de 81 pares de valores de resistência do fio de algodão 22/1 produzido em fiação piloto (X e em fiação industrial (Y mostrou que entre os dois processos existe uma correlação r= 0,563**. A equação de regressão é da forma Y= 611,631 + 0,486 X. Ficou demonstrado que equações calculadas para nove linhagens em cada localidade fornecem estimativas mais precisas da resistência do fio do que a equação geral. O coeficiente de correlação mais alto (r=0,924** foi encontrado para a localidade de Campinas.A yarn strength correlation analysis for the 22/1 yarn spun through a Miniature Spinning Plant (X and the yarn of same count spun through an industrial equipment (Y was carried out for 81 pairs of observations. The correlation coeficient between the two processes showed to be r = 0.563 **. The regression equation is of the form: Y = 611.631 + 0.486X. It was showed that the equations to predicted yarn strength, calculated for 9 pairs of values in each location, give better estimations than the general equation calculated for 81 pairs in 9 locations. The highest correlation coefficient (r = 0.944 ** was found for the locality of Campinas.

  19. GERAÇÃO DE MODELO DIGITAL DE TERRENO POR MEIO DA FILTRAGEM DE DADOS OBTIDOS POR VARREDURA A LASER UTILIZANDO UM MÉTODO BASEADO NO PRINCÍPIO DA DECLIVIDADE

    Directory of Open Access Journals (Sweden)

    Wallace Felipe Francisco Cardoso

    2014-06-01

    Full Text Available Due the advances in the technology of laser scanning systems, research in several countries have been initiated with the aim of exploring the recently technological resources developed. The result obtained by laser scanning systems provided the details of regions features and update many of the national territories models. The data generated by laser scanning match the altimetry data set named as Digital Elevation Model. This model derivation, when containing only terrain features, is called Digital Terrain Model. However, the Digital Terrain Models cannot be easily generated by laser scanning. In general, the Digital Terrain Models are derived from Digital Elevation Models applying filtering methods. This work objective is to adapt a Digital Elevation Model filtering method and discuss the results obtained.

  20. Modelo numérico do terreno obtido por diferentes métodos em cartas planialtimétricas Digital terrain model obtained by different methods in planialtimetric charts

    Directory of Open Access Journals (Sweden)

    Ana P. Barbosa

    2012-06-01

    Full Text Available O modelo numérico do terreno é importante para a determinação da declividade e da capacidade de uso das terras, motivo pelo qual foi desenvolvida uma proposta de metodologia de aquisição de dados de elevação que contemple um algoritmo eficiente para a geração de uma carta de declividades; para isto, buscou-se a obtenção e a avaliação de um modelo numérico do terreno sem a prática da vetorização das curvas de nível em cartas planialtimétricas. A área de obtenção dos dados de altitude (m foi no município de São Manuel, SP, onde os dados foram coletados através de dois métodos: vetorização das curvas altimétricas e o método por coleta de pontos de altitude sobre as curvas em nível com os pontos de máxima elevação. Os dados de altimetria (m foram analisados pela técnica geoestatística. Apesar da grande diferença no número de pontos coletados pelos dois métodos, os variogramas foram ajustados ao modelo exponencial e representaram alcance de aproximadamente 1.500 m, o que não justifica a grande dificuldade da vetorização das cartas planialtimétricas, uma vez que os dados pontuais coletados na área foram bem distribuídos e representaram adequadamente a superfície do terreno.The digital elevation model is important to determine the slope and land use capability, therefore, a proposal of methodology for acquisition of elevation data contemplating an efficient algorithm to generate a slope map was developed. Thus, it was aimed to obtain and evaluate a digital elevation model without the vetorization of the contours on planialtimetric charts. The area for acquisition of elevation data was São Manuel, SP. The data were collected by two methods: level contour vetorization and the gathering of elevation points on the level contour with maximum elevation points. The elevation data were analyzed by geostatistical techniques. Inspite of wide difference in the number of collected points between two methods, the variograms were adjusted to the exponential model and showed a range of approximately 1500 m, which does not justify the wide difficulty in vetorization of the planialtimetric charts, once the data points collected in the area were appropriately distributed, they represented rightly the terrain surface

  1. Evaluation of the physico-chemical properties of nanocomposites of low density linear polyethylene and organophilic montmorillonite obtained by fusion; Avaliacao das propriedades fisico-quimicas de nanocompositos de polietileno linear de baixa densidade e montmorilonita organofilica obtidos por fusao

    Energy Technology Data Exchange (ETDEWEB)

    Arndt, Aline; Sandrin, Bianca M.; Pezzin, A.P.T., E-mail: anapezzin@yahoo.com.br [Universidade da Regiao de Joinville (UNIVILLE), SC (Brazil); Meier, Marcia M. [Universidade do Estado de Santa Catarina (UESC), Joinville, SC (Brazil). Departamento de Quimica; Balzer, Palova S. [Centro Universitario Unisociesc, Joinville, SC (Brazil). Departamento de Engenharia Mecanica; Tavares, Maria I.B. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Laboratorio de Solucoes em Ralaxometria

    2016-07-01

    In this project they were produced and characterized nanocomposite organoclay applied to linear low density polyethylene in order to improve their physicochemical properties. Samples were produced by means of extrusion and injection process, varying proportions of nanoclay (2; 2.5; 3.0 and 3.5%) in LLDPE. Samples nanocomposites were characterized by TGA, DSC and Flammability test (UL-94). The TGA analysis showed that adding nanoclay increased thermal stability, especially for LLDPE / OMMT2,0 sample increased thermal stability at 4.4%. By DSC it was found that samples with nanoclay incorporation did not affect the Tm of LLDPE, though the increase of nanoclay raised the degree of crystallinity of the samples 52.7% in LLDPE / 2.5 OMMT sample. The flammability results show that the sample LLDPE / OMMT 2.0 showed a decrease of 37.77% in the flame propagation velocity. The NMR showed that the samples up LLDPE / 2.5 OM has an exfoliated nanocomposite formation. (author)

  2. Processamento e caracterizações estruturais, microestruturais e ferroelétricas do composto magnetoelétrico BiFeO3-PbTiO3 obtido pelo método de Pechini

    Directory of Open Access Journals (Sweden)

    V. F. Freitas

    Full Text Available Resumo Neste trabalho uma rota alternativa de síntese, o método de Pechini modificado, foi utilizada para obter nanopartículas do composto BiFeO3-PbTiO3 (BFPT. As imagens obtidas por microscopia eletrônica de varredura revelaram tamanhos de partículas inferiores a 120 nm. Análises estruturais apontaram a organização estrutural do composto (formação de estruturas com simetria tetragonal como função da temperatura de síntese. Cálculos da polarização espontânea indicaram a intensidade alcançada no composto BFPT. As análises de densidade eletrônica obtidas pelo método da máxima entropia indicaram a configuração das ligações químicas presentes no composto.

  3. Filmes delgados luminescentes obtidos a partir de hidroxicarbonatos de ítrio ativados por európio ou térbio Luminescent thin films obtained from ytrium hydroxycarbonates activated by terbium or europium

    Directory of Open Access Journals (Sweden)

    Emy Niyama

    2004-04-01

    Full Text Available These films were obtained by dip coating. Parameters like dislocation velocity; number of deposits, suspension concentration, and number of deposits followed or not by heat treatment between each deposit and calcination temperature were evaluated for establishing the best homogeneity. The obtained films were characterized in terms of their morphology, optical quality and photoluminescence by scanning electron microscopy (SEM, UV-vis absorption spectrophotometry and luminescence spectroscopy, respectively. The morphologic and luminescent characteristics showed dip coating as good laboratory technique for development of thin films for optical applications.

  4. Conformation of LSM/YSZ and LSM ceramic films obtained by the citrate and solid mixture techniques; Conformacao de filmes ceramicos de LSM e LSM/YSZ obtidos pelas tecnicas citratos e mistura de solidos

    Energy Technology Data Exchange (ETDEWEB)

    Chiba, R.; Vargas, R.A.; Andreoli, M.; Seo, E.S.M., E-mail: rchiba@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais. Lab. de SOFC - Insumos e Componentes

    2009-07-01

    In this work, the ceramic films of LSM/YSZ (strontium-doped lanthanum manganite/Yttria-stabilized zirconia) and LSM used as cathodes of the solid oxide fuel cells (SOFC) are conformed by the wet powder spraying technique. The composite LSM/YSZ was obtained by the solid mixture technique and LSM by the citrate technique. For the formation of the LSM/YSZ and LSM ceramic films was necessary the preparation of dispersed ceramic suspensions for the deposition in YSZ substrate, used as electrolyte of the CaCOS. These powders were conformed using an aerograph for the deposition of the LSM/YSZ and LSM thin films of approximately 40 microns. The half-cells had been characterized by X-ray diffractometry (XRD), identifying the phases hexagonal (LSM) and cubica (YSZ). And electronic scanning electron microscopy (SEM) was used to evaluate the adherence and porosity of the ceramic films according to the characteristics of the cathode. (author)

  5. Ultrasensitive human thyrotropin (h TSH) immunoradiometric assay (IRMA) set up, through identification and minimization of non specific bindings; Ensaio imunoradiometrico ultra-sensivel de tireotrofina humana (hTSH) obtido mediante a identificacao e minimizacao de ligacoes inespecificas

    Energy Technology Data Exchange (ETDEWEB)

    Peroni, C N

    1994-12-31

    An IRMA of h TSH, based on magnetic solid phase separation, was studied especially for what concerns its non specific bindings. These were identified as a product of the interaction between an altered form of radioiodinated anti-h TSH monoclonal antibody ({sup 125} I-m AB) and the uncoupled magnetizable cellulose particle (matrix). Apparently this form of {sup 125} I-m AB is a type of aggregate that can be partly resolved from the main peak on Sephadex G-200 and further minimized via a single pre-incubation with the same matrix. Solid phase saturation with milk proteins, tracer storage at 4{sup 0} C and serum addition during incubation were also found particularly effective is preventing its formation. These findings were used in order to reproducibly decrease non specific bindings to values <0.1% (or <70 cpm), increasing thus the signal-to-noise ratio (B{sub 60}/B{sub O}) up to values of 300-500. This way we obtained h TSH radio assays with functional sensitivities of about 0.05 m IU/L and analytical sensitivities of the order of 0.02 m IU/L, which classify them at least as among the best second generation assays and that are excellent indeed for magnetic IRMA s. A more optimistic sensitivity calculation, based on Rodbard`s definition, provided values down to 0.008 m IU/L. Such sensitivities, moreover, were obtained in a very reproducible way and all over the useful tracer life. (author). 83 refs, 13 figs, 25 tabs.

  6. AVALIAÇÃO DE PROPRIEDADES FÍSICAS E QUÍMICAS DE ELETRODEPÓSITOS DE Ni-W-P OBTIDOS EM CÉLULA DE HULL

    Directory of Open Access Journals (Sweden)

    Gecílio P. Silva

    2015-12-01

    Full Text Available Ni–W–P electrodeposits were synthesized in a Hull cell in order to simulate the obtainment under industrial conditions. Complete coverage of panels was accomplished by applying total currents of 1.0 and 2.0 A. Panels obtained with a current of 1.0 A appeared brighter. The best compositional uniformities, as determined by Energy Dispersive Spectrometer (EDS occurred in the current density ranges of 0.6 to 3.0 A dm−2 and 1.6 to 6.0 A dm−2 obtained with 1.0 and 2.0 A, respectively. However, the best morphological characteristics, as determined by Scanning Electro Microscope (SEM, were observed in those obtained with a total current of 1.0 A. Analysis of corrosion resistance by Electrochemical Impedance Spectroscopy (EIS and Potentiodynamic Linear Polarization (PLP in NaCl have shown significant variations in the amount of corrosion potential, polarization resistance, and even total impedance. The alloys exhibited amorphous character (XRD and crystallized above 400 °C to Ni and Ni3P phases, and possibly Ni–W, with a subsequent increase in hardness. The results suggest that under industrial conditions, current density variations due to the large and complex geometric shapes of substrates lead to formation of distinct alloys. Furthermore, these materials are potential substitutes for chromium deposits in many applications.

  7. Synthesis and characterization of an additive type super plasticizers obtained from plastics cups of polystyrene; Sintese e caracterizacao de um aditivo tipo superplastificantes obtido a partir de copos plasticos de poliestireno

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Carolina G.L.; Freire, Carolina B.; Tello, Cledola C. de O., E-mail: carolina_gabriela316@yahoo.com.br, E-mail: cbf@cdtn.br, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-BH), Belo Horizonte, MG (Brazil)

    2013-07-01

    This paper aims to describe the synthesis of an additive type superplasticizer from alternative material - plastic cups used of polystyrene - and characterize it physically and chemically in order to verify their efficiency and compare it with a commercial use superplasticizer. Following the search, the synthesized superplasticizer is used in mortars to assess their efficiency.

  8. Synthesis and characterization of pigments of hematite, obtained through a by-product of the siderurgy industry; Sintese e caracterizacao de pigmento de hematita, obtido atraves de um subproduto da industria siderurgica

    Energy Technology Data Exchange (ETDEWEB)

    Prim, S.R.; Folgueiras, M.V.; Lima, M.A. de, E-mail: dem6srp@joinville.udesc.b [Universidade Estadual de Santa Catarina (PGCEM/UDESC), Joinville, SC (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2009-07-01

    In the ceramic industry of tooting, whose selection is strongly influenced by the visual aspect of the decorated surface, the color becomes one of the most important characteristic for the too tings. With the purpose of seeking new pigments that replace or optimize the already known, news method to synthesis are being researched, such as new pigments system and also the incorporation of new raw materials. In this form, in the present work search to study the possibility of use of a by-product deriving from of the siderurgical industry, that introduces high grades of the Fe{sub 2}O{sub 3}. For that different contests of the residue were added in one matrix of silica in the hape of quartz, and homogenized using conventional milling and high energy milling. The material obtained after heating treatment in temperature that varied between 1050 and 1300 deg C was characterization by x-ray diffractometry, differential thermal analysis and scanning electron microscopy. The results shown the feasibility of the process depend of the control of the variables temperature and condition of milling in the quality of material obtained. (author)

  9. Subsidies to cytogenetic dosimetry technique generated from analysis of results of Goiania radiological accident; Subsidios a tecnica de dosimetria citogenetica gerados a partir da analise de resultados obtidos com o acidente radiologico de Goiania

    Energy Technology Data Exchange (ETDEWEB)

    Ramalho, Adriana Teixeira

    1993-06-15

    Following the Goiania radiation accident, which occurred in September of 1987, peripheral lymphocytes from 129 exposed or potentially exposed individuals were analyzed for the frequency of unstable chromosomal aberrations (dicentrics and centric rings) to estimate absorbed radiation dose. During the emergency period, the doses were assessed to help immediate medical treatment. After this initial estimation, doses were reassessed using in vitro calibration curves produced after the accident, more suitable for the conditions prevailing in Goiania. Dose estimates for 24 subjects exceeded 0,5 Gy. Among those, 15 individuals exceeded 1,0 Gy and 5 exceeded 3,0 Gy. None of the estimates exceeded 6,0 Gy. Four of the subjects died. During the emergency period, a cytogenetic follow-up of 14 of the exposed patients was started, aiming to observe the mean lifetime of lymphocytes containing dicentric and ring aberrations. The results suggest that for the highly exposed individuals the disappearance rate of unstable aberrations follows a two- term exponential function. Up to 470 days after the exposure, there is a rapid fall in the aberration frequency. After 470 days, the disappearance rate is very slow, almost constant. The estimated average half-time of elimination of dicentrics and rings among the highly exposed group (> 1 Gy) was 140 days for the initial period after the exposure (up to 470 days). This value is significantly shorter than the usually accepted value of 3 years reported in the literature. Mean disappearance functions of unstable chromosome aberrations were inferred, to be applied in accident situations in which there is a blood sampling delay. Statistical analysis of possible correlations between the individual half-times and biological parameters, such as sex, age, leukopenia level shown during the critical period, absorbed dose (initial frequency of chromosomal aberrations) and the administration of the bone marrow stimulating factor (rHuGM-CSF) was performed. None of these parameters showed correlation to the half-time of disappearance of chromosomal aberrations. For one patient who had high {sup 137}Cs body burden, the aberration yield at first increased in reasonable agreement with the estimated doses due to internal contamination, and later began to fall following the decorporation of {sup 137}Cs.

  10. Comparação entre métodos de avaliação da curvatura lombossacral obtidos por imagem radiográfica e fotográfica

    OpenAIRE

    Vacari, Daiane Aparecida

    2013-01-01

    Introdução: Os avanços tecnológicos no desenvolvimento de medidas preventivas são indispensáveis no processo de manutenção da qualidade de vida dos seres humanos. O incremento de novos métodos avaliativos para estruturas complexas como a coluna vertebral e, mais especificamente a coluna lombossacral, é demanda constante no âmbito de pesquisa científica. Objetivo: Investigar a correlação e a concordância entre diferentes métodos radiográficos de avaliação da concavidade lombossacral e desenvol...

  11. Avaliação do potencial antioxidante de extratos ativos de plantas obtidos por extração com fluido supercrítico Evaluation of the antioxidant potential of plant extracts obtained by supercritical fluid extraction

    Directory of Open Access Journals (Sweden)

    Oselys Rodriguez Justo

    2008-01-01

    Full Text Available The aim of this work was to evaluate the antioxidant properties of ginger and rosemary extracts, obtained by supercritical extraction. The extracts were characterized by HPLC, GC-MS, phenolic compounds content and antioxidant activity. The main active compounds were identified and high content of phenolic compounds was observed. The extracts presented high antioxidant activity against the free radicals ABTS•+ (350 and 200 mM Trolox/g, for ginger and rosemary, respectively and DPPH•+ (145 and 80 mM Trolox/g, for ginger and rosemary, respectively. These results suggested that the attained extracts are potential substitutes of synthetic antioxidants used in chemical, food and pharmaceutical industries.

  12. INCERTEZAS NA REPRESENTAÇÃO DA SALUBRIDADE AMBIENTAL ATRAVÉS DE INDICADORES OBTIDOS COM BASE EM DIFERENTES FONTES DE INFORMAÇÃO. ESTUDO DE CASO: BACIA DO RIACHO REGINALDO EM MACEIÓ, ALAGOAS

    Directory of Open Access Journals (Sweden)

    José Aparecido da Silva Gama

    2016-12-01

    Full Text Available Indicadores têm sido utilizados para representar a qualidade e abrangência na prestação de serviços de saneamento básico. Entretanto, diferentes fontes de informação abordam de forma distinta cada um dos componentes do saneamento. O IBGE, por exemplo, mostra como os usuários acessam (ou usam determinado serviço, enquanto o prestador do serviço traz sua abrangência e disponibilidade. Assim, a disponibilidade de determinado serviço de saneamento (abastecimento de água, por exemplo não garante que todos os usuários fazem uso (ou se beneficiam dele e da mesma forma. Com este trabalho, apresenta-se uma metodologia para composição de um Indicador de Salubridade Ambiental (ISA/Maceió, considerando informações relacionadas à prestação de serviços de saneamento básico provenientes de duas fontes: IBGE (censo 2010 e prestadores municipais de serviços de saneamento. O trabalho resultou em: (i adaptação de metodologias existentes de cálculo do ISA, considerando informações locais disponíveis; (ii a composição e (iii o mapeamento do ISA. A metodologia foi aplicada em estudo de caso na bacia do riacho Reginaldo em Maceió/AL, e os resultados mostraram que a fonte de informação utilizada pode gerar distorções importantes de interpretação do ISA. De maneira geral, a bacia estudada apresenta grande variação nas condições de salubridade ambiental, com setores censitários variando de condição de salubridade muito baixa a alta, considerando a realidade local.

  13. Estudo fitoquímico preliminar e bioensaio toxicológico frente a larvas de Artemia salina Leach. de extrato obtido de frutos de Solanum lycocarpum A. St.-Hill (Solanaceae

    Directory of Open Access Journals (Sweden)

    Marcelo Gonzaga de Freitas Araújo

    2010-11-01

    Full Text Available

    Neste trabalho avaliou-se o perfil fitoquímico e a toxicidade preliminar frente a larvas de Artemia salina do extrato etanólico de frutos de Solanum lycocarpum. O extrato foi submetido à analise fitoquímica preliminar para identificação das principais classes de metabolitos secundários presentes e testado frente a larvas de A. salina para obtenção das concentrações letais médias (CL50%. Os testes fitoquímicos demonstraram a presença de fenóis, taninos, saponinas, alcalóides e esteróides e triterpenos livres. O extrato foi fracionado em diferentes solventes para a avaliação da toxicidade frente à A. salina, apresentando considerável citotoxicidade encontrada na fração hidroalcoólica (CL50% = 285,546 µg/mL. Palavras-chave: Solanum lycocarpum, Artemia salina, triagem fitoquímica preliminar. ABSTRACT The phytochemical profile of ethanolic extract of Solanum lycocarpum fruits was analyzed and preliminary toxicity tests were performed against brine shrimp larvae. The extract was subjected to preliminary phytochemical analysis to identify the main classes of secondary metabolites and tested against the larvae of A. salina to obtain the median lethal concentrations (LC50%. The phytochemical tests showed the presence of phenols, tannins, saponins, alkaloids and free steroids. The extract was fractionated with various solvents for toxicity testing against the larvae and the hydroalcoholic fraction showed considerable cytotoxicity (CL50% = 285.546 g/mL. Keywords: Solanum lycocarpum, Artemia salina, phytochemical screening

  14. Chemical structures and thermal properties of polyesters obtained from different samples of bio diesel epoxidized; Estruturas quimicas e propriedades termicas de poliesteres obtidos a partir de diferentes tipos de biodiesel epoxidado

    Energy Technology Data Exchange (ETDEWEB)

    Samios, Dimitrios; Reiznautt, Quelen B.; Nicolau, Aline; Martini, Denise D.; Chagas, Arthur L. das, E-mail: dsamios@iq.ufrgs.b [Universidade Federal do Rio Grande do Sul (IQ/UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica. Lab. de Instrumentacao e Dinamica Molecular

    2009-07-01

    In this work new structures from oligo esters and polyesters from different oils (olive oil, sunflower oil and linseed oil) were synthesized and characterized. Oligo esters and polyesters were synthesized from the reaction of fatty acid methyl epoxy-esters, obtained from different oils, with cis-1,2-cyclohexanedicarboxylic anhydride in the presence of triethylamine (TEA). Different amounts of the resin 1,4-butanediol diglycidyl ether (BDGE) were added in order to increase the capacity of crosslinking. The molar ratio of BDGE used in system was between 0 and 0.066. The intermediate structures, as well as the oligo esters and polyesters produced, were analyzed by using Fourier Transform Infrared Spectroscopy and Nuclear Magnetic Resonance ({sup 1}H - NMR). The thermal behavior of the products was realized through differential scanning calorimetry and Thermogravimetric analyses. The presence of BDGE in the materials chains increases the bonding capacity resulting in a higher molecular weight material which presents good thermal stability. (author)

  15. {sup 1}H-NMR characterization of cellulose acetate obtained from sugarcane bagasse; Caracterizacao de acetato de celulose obtido a partir do bagaco de cana-de-acucar por {sup 1}H-RMN

    Energy Technology Data Exchange (ETDEWEB)

    Cerqueira, Daniel A., E-mail: daniel.cerqueira@ufba.b [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Ciencias Ambientais e Desenvolvimento Sustentavel; Rodrigues Filho, Guimes [Universidade Federal de Uberlandia (UFU), MG (Brazil). Inst. de Quimica; Carvalho, Rui de A. [Universidade de Coimbra (Portugal). Dept. de Bioquimica; Valente, Artur J.M. [Universidade de Coimbra (Portugal). Dept. de Quimica

    2010-07-01

    Cellulose from sugarcane bagasse was used for synthesizing cellulose acetate with different degrees of substitution, which were characterized by {sup 1}H-NMR through the relationship between the peak areas of the hydrogen atoms of the acetate groups (-(C=O)OCH{sub 3}) and the peaks of the hydrogen bonded to the carbon atoms of the glycosidic rings. Suppression of some signals was carried out in order to remove the residual water resonance in the materials and those related to impurities in cellulose triacetate as well. A deconvolution method for the computation of the degree of substitution of acetylation is proposed. The degrees of substitution for the cellulose samples were 2.94 and 2.60, in good agreement with those obtained by chemical determination through an acid-base titration. (author)

  16. Characterization of cellulose acetate obtained from sugarcane bagasse by {sup 1}H-NMR; Caracterizacao de acetato de celulose obtido a partir do bagaco de cana-de-acucar por {sup 1}H-RMN

    Energy Technology Data Exchange (ETDEWEB)

    Cerqueira, Daniel A.; Rodrigues Filho, Guimes, E-mail: d.a.cerqueira@gmail.co [Universidade Federal de Uberlendia (IQ/UFU), MG (Brazil). Inst. de Quimica; Carvalho, Rui A. [Universidade de Coimbra (UC) (Portugal). Dept. de Bioquimica; Valente, Artur J.M. [Universidade de Coimbra (UC) (Portugal). Dept. de Quimica

    2009-07-01

    Cellulose from sugarcane bagasse was used for synthesizing cellulose acetate with different degrees of substitution, which were characterized by {sup 1}H-NMR through the relationship between the peak areas of the hydrogen atoms present at the acetate groups (-(C=O)OCH{sub 3} ) and the peaks of the hydrogen bonded to the carbon atoms of the glycosidic rings. Suppression was carried out in order to remove the peak of residual water in the materials and the peak related to impurities in cellulose triacetate. Degree of substitution values obtained through the resonance deconvolution were compared to those obtained by chemical determination through an acid-base titration. The determined degrees of substitution of the cellulose samples were 2.94 and 2.60. (author)

  17. Estudo da densidade de ligações Cruzadas em géis superabsorventes obtidos do acetato de celulose Study of the crosslinking density in superabsorbent gels obtained from cellulose acetate

    Directory of Open Access Journals (Sweden)

    André M. Senna

    2012-01-01

    Full Text Available Neste trabalho foram realizadas sínteses de géis derivados de acetato de celulose (AC com grau de substituição (GS 2,5 por intermédio de reações de reticulação via esterificação. Os grupos hidroxílicos livres do AC foram reagidos com o dianidrido do ácido 1, 2, 4, 5 benzenotetracarboxílico (PMDA em meio homogêneo. As caracterizações foram realizadas por TGA (Análise termogravimétrica, espectroscopia na região do infravermelho (FTIR, retro titulação para determinar o grau de substituição do AC e microscopia de força atômica (AFM. Os géis foram sintetizados com as seguintes razões estequiométricas: [1:1], [1:2/3], [1:3] e [3:1] mol de PMDA/mol de OH livre respectivamente. A base da teoria de Flory-Rehner foi empregada para determinar ligações cruzadas nos géis. Os resultados de AFM mostram topografias distintas quando são comparados os géis entre si e quando os géis são comparados ao polímero de acetato de celulose. Este trabalho foi motivado pela importância tecnológica de polímeros de fontes renováveis como a celulose, em que um derivado de celulose foi usado para obter um polímero promissor para liberação controlada de medicamentos e adsorção de metais pesados em meio aquoso. Uma das vantagens deste polímero derivado do acetato de celulose é o emprego de poucas etapas na sua síntese.This work reports the synthesis of gels derived from cellulose acetate (CA with degree of substitution (DS 2.5 through esterification and crosslinking reactions. The free hydroxyl groups were reacted by using dianhydride of acid 1,2,4,5 benzenotetracarboxylic (PMDA as modifier in a homogeneous media. Characterization was performed with Thermogravimetric Analysis (TGA, Fourier Transform Infrared Spectroscopy (FTIR, retrotitration (known as back titration to determine the degree of substitution of AC and atomic force microscopy (AFM. The gels were synthesized with the following stoichiometric ratios: [1:1], [1:2/3], [1:3] and [3:1] PMDA mol/mol of free OH, respectively. A gel was synthesized in excess of 200% of PMDA in relation to free OH groups of the AC. The basis of the Flory-Rehner theory was used for determining crosslinking in the gels. Briefly, the main results showed that the crosslinking density increased proportionally to the amount of PMDA added to the reaction medium. Distinct AFM topographies were obtained for distinct gels, which were also different from the polymer cellulose acetate. This work was motivated by the technological importance of polymers from renewable sources such as cellulose, in which a cellulose derivative was developed with promising application in drug delivery and in adsorption of heavy metals in aqueous systems. The advantage of this cellulose acetate derivative is the use of fewer steps in its synthesis.

  18. Polymeric biocomposites obtained from the amylacea and lignocellulose fraction of the mango core (Mangifera indica), Tommy Atkins; Biocompositos polimericos obtidos a partir da fracao lignocelulosica e amilacea do caroco de manga (Mangifera indica), Tommy Atkins

    Energy Technology Data Exchange (ETDEWEB)

    Cordeiro, Edna Maria Silva

    2013-07-01

    This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nano biocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as well as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extract showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatment performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with composition mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional commercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potential to producing of biodegradable materials. (author)

  19. Influence of hydrothermal carbonization and treatment by microwave on morphology of carbonaceous materials obtained from lignin; Influencia da carbonizacao hidrotermica e do tratamento por microondas na morfologia de materiais carbonaceos obtidos de lignina

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, I.B.; Barin, G.B.; Barreto, L.S.; Santos, M.C.G., E-mail: iara.negreti18@gmail.com [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil)

    2014-07-01

    The conversion of biomass into carbon materials with special morphologies via hydrothermal carbonization presents itself as a potential route for the use of renewable precursors in obtaining carbonaceous structures. In the present study the influence of the hydrothermal carbonization (250 ° C / 4 h) followed by microwave treatment (1-2-4 hours at 25 and 40 mL) in morphology and structure of lignin. The samples were analyzed by X-ray diffraction and scanning electron microscopy. The plaque morphology of lignin was preserved during the hydrothermal process. However, when treated by microwave can be observed partial dissolution of lignin leading to the formation of microspheres on the surface. XRD presence of an amorphous halo 2θ = 23 ° attributed to the (002) network of the amorphous carbon was observed. (author)

  20. Microstructural analysis of sinterized aluminum powder obtained by the high energy milling of beverage cans; Analise microestrutural de po de aluminio sinterizado obtido pela moagem de alta energia de latas de bebidas

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Jose Raelson Pereira de; Peres, Mauricio Mhirdaui, E-mail: mauricioperes@ct.ufrn.br [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil)

    2016-07-01

    The objective is the study of the effect of high energy milling on the sintering of aluminum from beverage cans. The selected aluminum cans were cut and subjected to high energy milling under a common atmosphere (in the air). In milling, three grams of aluminum was used to maintain the ratio of 10/1 between the mass of the beads and the material. The milling time was varied in 1h, 1.5h and 2h, keeping the other variables constant. The particle size distribution was measured by laser granulometry, for further compaction and sintering at a temperature of 600 ° C for 2 h. The samples were characterized by scanning electron microscopy (SEM). The granulometric analysis of the powders found that higher milling times produced finer particles. Powders with granulometry of less than 45 μm were obtained at 1 h, 1.5 h and 2 h times. The times of 1.5h and 2h promoted finer particles with better distribution of size. The SEM analyzes showed little variation in the shape of the particles as a function of the variation of the grinding times, presenting irregularities in the platelet geometry. The sintering time and temperature were effective in the densification of the powder particles, which were influenced by the average particle size.

  1. CARACTERIZAÇÃO FUNCIONAL E NUTRICIONAL DE UM ISOLADO PROTÉICO OBTIDO A PARTIR DE RESÍDUOS DE CAMARÃO ROSA (Farfantepenaeus paulensis

    Directory of Open Access Journals (Sweden)

    P. G. COSTA

    2008-11-01

    Full Text Available

    Os resíduos da industrialização de camarão rosa em Rio Grande, sul do Brasil, geram problemas de poluição ambiental devido ao seu descarte próximo à Laguna dos Patos. Estes resíduos apresentam vários componentes de interesse: quitina, proteína e astaxantina. O objetivo do trabalho foi obter um isolado protéico a partir de resíduos da industrialização do camarão rosa e estudar suas propriedades funcionais e nutricionais. O isolado protéico apresentou 33,2% de solubilidade em pH alcalino e a capacidade de retenção de água apresentou maior percentual (1,9g H2O/ g proteína em pH ácido (2,0 e temperatura de 50ºC, capacidade de retenção de óleo de 0,9g óleo/ g proteína; capacidade de formação de espuma de 237,1% e estabilidade da espuma de 75,7%. O isolado protéico apresentou 89,0% de proteína (b.s. e coeficiente de digestibilidade "in vivo" de 82,5%. Os aminoácidos essenciais presentes em maior concentração foram leucina (5,9%, lisina (5,0% e isoleucina (3,8%, apresentando 1,9% de metionina, indicando potencial muito bom para utilização em formulações protéicas de alimentos.

  2. Films of chitin, chitosan and cellulose obtained from aqueous suspension treated by irradiation of high intensity ultrasound; Filmes de quitina, quitosana e celullose de sisal obtidos a partir de suspensoes aquosas tratadas com irradiacao de ultrassom de alta intensidade

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Erika V.R.; Mariano, Mario S.; Campana-Filho, Sergio P., E-mail: erikavi@iqsc.usp.br [Universidade de Sao Paulo (IQSC/USP), Instituto de Quimica de Sao Carlos, Sao Carlos, SP (Brazil)

    2011-07-01

    Films of chitin, chitin/chitosan and chitin/sisal cellulose were obtained by casting their aqueous suspensions previously treated with irradiation of high intensity ultrasound. The films were characterized for surface morphology by scanning electron microscopy and it is possible notice that the films containing chitosan are much more homogeneous. The thermal behavior of the films was evaluated by dynamic mechanical thermal analysis, differential scanning calorimetry, and thermogravimetric analysis and revealing similarity in comparison with the thermal behavior of polysaccharide isolated. The tensile strength was determined and the film containing chitosan showed the best result when compared to other films. The crystallinity index of the films analyzed by X-ray diffraction showed that the films are amorphous material. The analysis by infrared spectroscopy showed that treatment of aqueous suspensions of polysaccharides with irradiation of high intensity ultrasound did not change the chemical structure of polymers. The crystallinity index was determined by X-ray diffraction, revealing that the films are amorphous materials. The results of this study indicate the possibility of processing of chitin, chitosan and cellulose, polysaccharides whose solubilities are limited to a few solvent systems, by treating their aqueous suspensions with high intensity ultrasound. (author)

  3. Estudo da dispersão de argilas organofílicas em nanocompósitos de prolipropileno obtidos pelo método em solução com auxílio de ultrassom

    Directory of Open Access Journals (Sweden)

    Eveline Bischoff

    2013-01-01

    Full Text Available Nanocompósitos de polipropileno PP/OMMT foram preparados com o uso de duas argilas modificadas organofilicamente (C-15A e I-44P e de um compatibilizante (PP-g-MA pelo método em solução utilizando-se um banho de ultrassom. O objetivo deste estudo foi compreender a morfologia dos nanocompósitos, ou seja, o grau de dispersão destas argilas na matriz de polipropileno, e consequentemente, correlacioná-la com as propriedades finais obtidas. A morfologia dos nanocompósitos foi avaliada por Difração de Raios X (DRX e Microscopia Eletrônica de Transmissão (MET. As propriedades mecânico-dinâmicas e térmicas dos nanocompósitos foram avaliadas por Análise Mecânico-Dinâmica (DMA e Calorimetria Diferencial de Varredura (DSC. Análises estatísticas das imagens de transmissão foram realizadas possibilitando a obtenção da razão de aspecto (comprimento/espessura das partículas de argila.

  4. Characterization of Al{sub 2}O{sub 3}-Co ceramic composite obtained by high energy mill; Caracterizacao de composito ceramico Al{sub 2}O{sub 3}-CO obtido por moagem de alta energia (MAE)

    Energy Technology Data Exchange (ETDEWEB)

    Souza, J.L.; Assis, R.B. de; Carlos, E.M.; Oliveira, T.P.; Costa, F.A. da, E-mail: leonaldojs@hotmail.com [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica

    2014-07-01

    This work aims to characterize the ceramic composite Al{sub 2}O3-Co obtained by high energy grinding. The composites were obtained by milling Al{sub 2}O{sub 3} and Co in a high energy mill at a speed of 400 rpm, in proportions of 5 to 20% Cobalt (Co). Ceramic composites with 5 and 20% cobalt were sintered at 1200 and 1300 ° C, with a 60-minute plateau and a heating rate of 10 ° C / min. The samples were characterized by X-ray diffraction (XRD), thermogravimetry and differential scanning calorimetry (TG / DSC) and scanning electron microscopy (SEM). The results show the significant effect of cobalt percentage and high energy grinding on the final properties of the Al{sub 2}O{sub 3} - Co ceramic composite, presenting satisfactory values for the composite with a 20% cobalt percentage, showing to be a promising material for application in cutting tools.

  5. Nível de evidenciação obtido na divulgação das notas explicativas de instrumentos financeiros derivativos segundo a deliberação CVM n° 550/08

    Directory of Open Access Journals (Sweden)

    Nilza Nashiro Florence dos Santos

    2010-01-01

    Full Text Available The derivatives market has grown and refi ned in recent years, with the need to regulate this practice through the institutionalization of specifi c notes. Thus, this study aims to analyze the explanatory notes relating to derivative fi nancial instruments of a public company in the food sector of the city of trying to check whether they are appropriate to the quality standards recommended by the CVM. 550 of 17 October 2008. To this end, we carried out a qualitative study of documentary character, the data were analyzed using the technique of content analysis. It was found that the company discloses studied qualitative and quantitative information about its fi nancial instruments and the notes thereto are in accordance with the new guidelines of the CVM, thus improving visibility, but without clear disclosure of all risks inherent in the operations of protection company¿s activity. It is believed that with the emanation of clearer rules for using these instruments there had been a change in the quality of information disclosed is also moving towards greater clarity on the degree of risk exposure of the company at which to invest. We conclude that the effectiveness and implications based on the quality of information that will be brought in view of the institutionalization of norms, are still to come, and thus opens a way to improve education and further studies on the subject, increasingly aligning practices with the Brazilian quantitative and qualitative requirements of international accounting standards (IFRS.

  6. Effect of deposition distance on thickness and microstructure of silicon thin film produced by electron beam evaporation; Efeito da distancia de deposicao na espessura e microestrutura de filme fino obtido por evaporacao por feixe de eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Toledo, T.F.; Ramanery, F.P.; Branco, J.R.T. [Fundacao Centro Tecnologico de Minas Gerais, Belo Horizonte, MG (Brazil)], e-mail: thalitaqui@yahoo.com.br; Cunha, M.A. [Acos Especiais Itabira S.A. (Acesita), Belo Horizonte, MG (Brazil)

    2006-07-01

    The interest for materials with new characteristics and properties made thin films an area of highest research interest. Silicon thin films have been widely used in solar cells, being the main active layer. In this work, the effect of deposition distance on thickness and microstructure of silicon films was investigated. The electron beam evaporation technique with argon plasma assistance was used to obtain films on stainless steel 304, Fe-Si alloy and soda lime glass. The experiments were made varying electron beam current and deposition pressure. The results are discussed based on Hertz-Knudsen's law and thin films microstructure evolution models. The samples were characterized by scanning electron microscopy, atomic force microscopy, X-ray diffraction and profilometer. (author)

  7. Physicochemical characterization of sludge obtained in a UASB reactor: influence on the energetic utilization in the pyrolysis process; Caracterizacao fisico-quimica de lodo obtido em um reator UASB: influencia no aproveitamento energetico em processo de pirolise

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Murillo Barros de [Universidade Federal do Tocantins (UFT), Palmas, TO (Brazil)], Email: murillopur@yahoo.com.br; Vieira, Glaucia Eliza Gama; Cardoso, Aderlanio da Silva; Silveira, Dyego Amaral; Figueiredo, Radson Lima [Universidade Federal do Tocantins (LEDBIO/UFT), Palmas, TO (Brazil). Lab. de Ensaios e Desenvolvimento de Biomassas e Biocombustiveis

    2010-07-01

    In biological treatment processes of domestic sewer it leaves of the organic matter is converted and another is absorbed being part of the microbial biomass denominated generic of mud biological or secondary composed mainly of biological solids, and that for that reason can also be denominated of sewage sludge. To give a maintainable final destiny for that residue has been one of the great challenges of the sanitation in the last years. Great part of that material is destined unproductive some are incinerated, others are disposed in sanitary embankments. This work had as objective the physiochemical characterization of the digested sludge, virgin and free from oxide of calcium (CaO), produced in the reactor UASB, of ETE Vila Uniao located in the city of Palmas-TO, for the destination as raw material for energy use in pyrolysis process. The collected sample was taken drought and stabilized to be analyzed at the laboratory LEDBIO/UFT where they were studied the particle, tenor of ashes, humidity and volatile density and sequential extraction for soxhlet. Found in the biomass loud tenor of volatile (56,72%), carbon fastens low (5,21%) and a considerable tenor of ashes (32,78%), what suggests that that sludge, in agreement with the comparisons of the literature, can obtain good incomes in pyrolysis process, especially incomes in bio-oil and coal. (author)

  8. Biomaterials recycling: bioglasses obtained from reuse of hydroxyapatite (HA) bovine bone with term exceeded validity; Reciclagem de biomateriais: biovidros obtidos a partir do reaproveitamento de hidroxiapatita (HA) ossea bovina com prazo de validade excedido

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A.C.; Santos, S.C.; Braga, F.J.C., E-mail: dasilva.ac@uol.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Aparecida, A.H. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Araraquara, SP (Brazil). Inst. de Quimica

    2012-07-01

    The hydroxyapatite (HA) is a reference bioceramic for bone replacement and regeneration medical practice, becoming one of the most produced and researched bone graft material. Since it is a material for biomedical application, the manufacture and storage of this bioceramic must comply with severe conservation criteria, and its validity date is the lawful major factor for disposal. Materials with the exceeded expiration date are usually discarded and incinerated, resulting in ash, environmental contamination and energy expenditure. This study evaluates the possibility of reuse of bovine HA collected after its validity date as raw material to obtain bioglass, aiming to natural resources saving and environmental emissions mitigation. 45S5 similar compositions were obtained by melting the materials at 1500 ° C, followed by rapid cooling and annealing thermal treatment (500 ° C for 2h), analytical grade chemical reagents were used to set the final composition. The obtained materials were characterized by X-ray diffraction, infrared spectroscopy (FT-IR), and hydrolysis resistance techniques. The results of comparative chemical resistance (Hydrolytic) tests indicate the potential use of the materials developed for bone replacement applications. (author)

  9. Windmills: selection method and results obtained by the Renewable Energy Center of UNESP - Guaratingueta Campus, Sao Paulo state, Brazil; Cata-vento: metodo de selecao e resultados obtidos pelo Centro de Energias Renovaveis da UNESP - Campus Guaratingueta

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Luis Fernando Silva; Souza, Teofilo Miguel de [Universidade Estadual Paulista (UNESP), Guaratingueta, SP (Brazil). Centro de Energias Renovaveis], e-mail: teofilo@feg.unesp.br, e-mail: lfernandosm@uol.com.br

    2004-07-01

    Windmills are always a good option to promote irrigate in areas with adequate potential wind. Its correct selection can guarantee the enough water supply with minimum cost. Since April 2004 the Renewable Energy Center of UNESP - Campus Guaratingueta' has tested a commercial windmill with 18 blades rotor and 3,4 diameter meters, that in a area with approximately 3 m/s average wind speed, has been obtained a average daily 1500 water liters. This volume is enough to supply a small country state, however, it could be get with a smaller capacity machine, if this worked properly. (author)

  10. Dispersion of organoclays in polypropylene nanocomposites by ultrasound-assisted solution method; Estudo da dispersao de argilas organofilicas em nanocompositos de prolipropileno obtidos pelo metodo em solucao com auxilio de ultrassom

    Energy Technology Data Exchange (ETDEWEB)

    Bischoff, Eveline; Santos, Kelly Silva dos; Liberman, Susana Alcira; Mauler, Raquel Santos, E-mail: eve_bischoff@yahoo.com.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica

    2013-07-01

    Polypropylene nanocomposites PP/OMMT were prepared using two modified organic clays (C-15A and I-44P) and (PP-g-MA) as compatibilizer in the solution method using an ultrasound bath. The objective of this study was to understand the morphology of the nanocomposites and degree of clay dispersion in the polypropylene matrix, which are then correlated with the final properties. The morphology of nanocomposites was evaluated by X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). The dynamic mechanical properties and thermal properties were measured by Dynamic Mechanical Analysis (DMA) and Differential Scanning Calorimetry (DSC). Statistical analyses of the transmission images were made in order to obtain the aspect ratio (length/thickness) of the clay particles. (author)

  11. Preparação e caracterização de nanocompósitos multifuncionais obtidos com nanopartículas ferroelétricas e paramagnéticas em filmes de borracha natural

    OpenAIRE

    Bellucci, Felipe Silva

    2013-01-01

    La presente investigación tuvo como objetivo desarrollar una metodología para la preparación de nanocompuestos funcionales y multifuncionales a partir de caucho natural vulcanizado combinado con distintas concentraciones de nanopartículas de cerámicas ferroeléctricas de niobato de potasio y estroncio KSr2Nb5O15 (KSN) y de una cerámica paramagnética con base níquel-zinc denominada ferrita Ni0,5Zn0,5Fe2O4 (NZF). Por otra parte se puso a punto, con satisfactorios resultados, el desarrollo de las...

  12. Radiation therapy using the wildlife medicine: a reasoned obtained study in cases of literature; Utilizacao da radioterapia na medicina de animais selvagens: um estudo fundamentado em casos obtidos da literatura

    Energy Technology Data Exchange (ETDEWEB)

    Vettorato, Michel de Campos; Fernandes, Marco Antonio Rodrigues; Vulcano, Luis Carlos [Universidade Estadual Paulista Julio de Mesquita Filho (FMVZ/UNESP), Botucatu, SP (Brazil). Faculdade de Medicina Veterinaria e Zootecnia; Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil). Dept. de Dermatologia e Radioterapia

    2016-03-15

    The cancer is the kind of tumor that affects both humans and animals and is responsible for more deaths worldwide. In wildlife, cancer is a problem found most often in zoo animals. Thus veterinary oncologists have researched and developed therapeutic approaches to many types of cancer over the years in both curative and palliative therapies including therein the application of radiation. The basic principle of radiotherapy is the effect of ionizing radiation on the tumor cells, causing them to death. However, its application in veterinary medicine for wildlife is not much reported in the literature, especially in Brazil. This study aims to describe and compare some of radiotherapy applications in different species of wildlife looking to improve her knowledge in veterinary medicine through a brief literature review. After the descriptions and comparisons, it is concluded that despite the number of cases taken for this study, all the cases mentioned had satisfactory results using radiation therapy and all the presented cases provided relevant information that can guide future researchers in this area, thus improving knowledge of this therapy and improve the quality of life of animals. (author)

  13. Desenvolvimento de bebida láctea sabor morango utilizando diferentes níveis de iogurte e soro lácteo obtidos com leite de búfala

    OpenAIRE

    Caldeira,Luciana Albuquerque; Ferrão,Sibelli Passini Barbosa; Fernandes,Sérgio Augusto De Albuquerque; Magnavita,Ana Prudência Assis; Santos,Tayse Dantas Rebouças

    2010-01-01

    Este trabalho foi realizado com o objetivo de avaliar as características físico-químicas, sensoriais e microbiológicas de bebidas lácteas elaboradas com leite de búfala e diferentes níveis de iogurte e soro lácteo. Foram desenvolvidas cinco formulações à base de leite de búfala, soro de queijo tipo frescal e iogurte. Os tratamentos foram: T1=10% leite, 10% soro e 80% iogurte; T2=10% leite, 20% soro e 70% iogurte; T3=10% leite, 30% soro e 60% iogurte; T4=10% leite, 40% soro e 50% iogurte; e T5...

  14. Híbridos pré-comerciais resistentes a Tuta absoluta obtidos de linhagem de tomateiro rica em acilaçúcares Pre-commercial hybrids obtained from an acylsugar-rich tomato inbred line, resistant to Tuta absoluta

    Directory of Open Access Journals (Sweden)

    Gabriel M Maciel

    2011-06-01

    Full Text Available O trabalho foi realizado com o objetivo de avaliar o potencial agronômico de híbridos de tomateiro a partir da linhagem TOM-687, rica em acilaçúcares e de resistência comprovada a pragas. O experimento foi instalado na HortiAgro, município de Ijaci, MG. Foi constituído de 30 genótipos (5 híbridos comerciais, 1 linhagem pré-comercial (TOM-687, e 24 híbridos nos quais TOM-687 foi utilizada como um dos pais, os quais foram conduzidos em tutoramento com haste dupla, no espaçamento de 1,30 x 0,50 m, totalizando 15.385 plantas por hectare. Foram realizadas nove colheitas, entre as datas de 01/11/08 a 28/11/08. Foram avaliadas as características de massa média por fruto (g fruto-1 e produção por hectare (t ha-1. Os 24 híbridos que tiveram TOM-687 como um dos pais apresentaram potencial produtivo similar ao das testemunhas comerciais Débora Max, Bravo, Bônus, Kombat e Atyna. Dos 24 híbridos experimentais, quatro (TEX-298, TEX-310, TEX-315 e TEX-316 foram avaliados quanto à resistência à traça-do-tomateiro (Tuta absoluta e mostraram-se mais resistentes do que as testemunhas comerciais.This experiment was designed to assess the agronomic potential of tomato hybrids obtained from the tomato line TOM-687, an acylsugar-rich line with confirmed resistance to an array of tomato pests. The experiment was carried out at the HortiAgro Sementes research station, in Ijaci, Minas Gerais State, Brazil. The treatments comprised 30 genotypes (5 commercial hybrid checks, 1 high acylsugar line (TOM-687, and 24 hybrids in which TOM-687 was one of the parents. Plants were trained to two stems, in a spacing of 1.30 m between rows x 0.50 m between plants within a row, totaling 15,385 plants per hectare. Nine harvests were performed between November 1st, 2008 and November 28th,2008. Traits assessed were mean fruit weight (g fruit-1 and total yield (t ha-1. All 24 hybrids with TOM-687 as a parent showed yields similar to those of the commercial check hybrids Débora Max, Bravo, Bônus, Kombat and Atyna. Four of these experimental hybrids (TEX-298, TEX-310, TEX-315 and TEX-316 were assessed for resistance to the South American tomato pinworm Tuta absoluta, and were shown to possess higher degrees of pest resistance than the current commercial hybrid checks.

  15. Revestimentos de alta camada obtidos com a modificação de resinas epóxi novolaca pela reação com organo-siloxano e catálise ácida

    Directory of Open Access Journals (Sweden)

    Roberta Jachura Rocha

    Full Text Available Epoxy resins are an important class of thermostable polymers, widely used in structural applications or as adhesives. However, the low fracture resistance is their main weakness in many applications. Due to this fact, this study aims to modify a polymer matrix based on a novolac epoxy resin with an organo siloxane (AMS. The final properties of cured epoxys resins are affected by the curing process and the coatings modified in this study with AMS and cured with acid catalyst presented greater resistance to thermal decomposition compared to that cured with Aradur, demonstrating a higher content of crosslinking in the siloxane polyether and the novolak epoxy resin chains. This epoxy matrix modified was used to prepare coatings whose films applied to 1020 steel surfaces presented a resistance of 1010 Ohm-cm-2. This resistance value is one order of magnitude greater than that of epoxy resins films modified by siloxanes in published studies, which demonstrates a potential economy in terms of maintenance costs of metal structures and machines used in power plants (UTE. To obtain the developed inks in pilot plant scale, it was used an aromatic polyamine as curing agent, characterizing the product obtained as an epoxy bi-component paint for commercial use.

  16. The influence of chemical composition and fineness on the performance of alkali activated cements obtained from blast furnace slags; A influencia da composicao quimica e da finura no desempenho de cimentos alcali ativados obtidos com escorias de alto forno

    Energy Technology Data Exchange (ETDEWEB)

    Langaro, Eloise Aparecida; Matoski, Adalberto, E-mail: elolangaro@hotmail.com, E-mail: adalberto@utfpr.edu.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba (Brazil); Luz, Caroline Angulski da; Buth, Islas Stein; Moraes, Maryah Costa de; Pereira Filho, Jose Ilo, E-mail: angulski@utfpr.edu.br, E-mail: islas_sb@hotmail.com, E-mail: maryah_moraes@hotmail.com, E-mail: ilofilho@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Pato Branco, PR (Brazil)

    2017-01-15

    New binders are being developed for concrete in order to reduce the environmental impact mainly related to CO{sub 2} emissions. Alkali -activated cements (CATs) are obtained from lime-aluminosilicate materials and an alkali activator and can reduce by 80% the emission of CO{sub 2} compared to Portland Cement (PC). Papers have also shown physical and mechanical properties similar or higher than those presented by the PC, however, the activation of raw material is complex. Recent papers have also have showed a strong influence of the characteristics of raw material on the performance of CAT, however, little mentioned in the literature.. Therefore, this paper aimed to analyze the influence of characteristics of blast furnace slag (fineness and chemical composition) on the behavior of activated alkali cements. For this purpose, two slags were used, A and B, which were submitted to different milling times; and activated using 5% of NaOH. Mortars and pastes were prepared for compressive strength testing (7 and 28 days), measurements of heat of hydration and investigation of microstructure (XRD and DSC) were made. The results showed that the mortar made with slag A reached a very good mechanical performance, close to 48MPa at 28 days, and higher formation of CSH, in opposite of slag B. The probable hypothesis of this study is that the system formed in CAT made with slag A (containing more Al{sub 2}O{sub 3}) could provide CSH with a greater incorporation of Al and a lower crystallinity, increasing the mechanical strength. (author)

  17. Biodegradability and aging study of rubber films obtained by gamma radiation vulcanization processes of latex; Estudo da biodegradabilidade e envelhecimento de filmes de borracha obtidos por processos de vulcanizacao do latex por radiacao induzida de fonte gama

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Carlos Felipe Pinto

    2005-07-01

    The natural rubber latex (NRL) is industrially crosslinked by the conventional process of vulcanization, which uses sulphur and heat. Otherwise, the network can also be done by the alternative process with ionizing radiation. In this work the crosslinking of NRL was studied by the comparison of the conventional vulcanization system and the ionizing radiation process of {sup 60}C source. The products obtained, the irradiated latex, the irradiated latex with approximately 1% of soy lecithin and the sulphur vulcanized latex were tested by accelerated aging with ultraviolet (UV) and outdoor aging with compostage, tensile strength at break, swelling and gel fraction, fungi micro biota, scanning electron microscopy (SEM), infrared spectroscopy (FTIR) and thermogravimetry and differential scanning calorimetry analysis (TG and DSC). The results showed that the aging with microorganisms have a great influence in the physical properties of the samples. The thermal stability order observed showed that the sulphur vulcanized latex is more resistant, what is probably associated to a network more stable under the aging conditions. On the other hand, the irradiated latex showed intense biodegradation aspects, particularly with the presence of the soy lecithin. (author)

  18. Biodigestão anaeróbia de dejetos de caprinos obtidos nas diferentes estações do ano Anaerobic digestion of caprine manure in different seasons

    Directory of Open Access Journals (Sweden)

    Ana C. Amorim

    2004-04-01

    Full Text Available Foram utilizados dejetos produzidos por caprinos, em diferentes estádios fisiológicos e submetidos ao mesmo regime alimentar, nas quatro estações do ano. O objetivo foi avaliar o efeito das estações do ano sobre a digestão anaeróbia de resíduos de caprinos em biodigestores modelo batelada com volume útil de 60 L de substrato em fermentação e mantidos sob temperatura ambiente. Foram avaliadas as produções de biogás, as reduções de sólidos voláteis (SV, os potenciais de produção (m³ de biogás/kg de substrato, de estrume, de sólidos totais (ST ou sólidos voláteis, os números mais prováveis de coliformes totais e fecais, e a composição do biogás. As reduções de SV foram de 38; 34; 33 e 39% para o verão, outono, inverno e primavera, respectivamente. Os totais de biogás produzidos foram de 1,06 m³ no verão, 0,88 m³ no outono, 0,88 m³ no inverno e 0,99 m³ na primavera, e os potenciais de produção médios foram de 0,02 m³ de biogás/kg de substrato e 0,2 m³ de biogás/kg de estrume para todas as estações. As reduções médias de coliformes totais e fecais foram de 99,99% em todas as estações, e os teores máximos de CH4 no biogás foram 88,3; 84,6; 80,6 e 79,2%, para o verão, outono, inverno e primavera, respectivamente.The dejections produced by caprines were used, in different physiologic states and submitted to the same alimentary regime, in the four seasons of the year.This study was carried out in 60 L batch digesters at ambient temperature and aimed to evaluate the effect of the season on the anaerobic digestion of caprine manure. The biogas production, volatile solids (VS reduction, the potential production (m³ of biogas/kg of substrate, manure, total solids (TS or VS, the removal of total and fecal coliforms and the biogas composition were evaluated. The VS reductions were of 38; 34; 33 and 39% for Summer, Autumn, Winter and Spring, respectively. The biogas production were of 1.06 m³ in Summer, 0.88 m³ in Autumn, 0,88 m³ in Winter and 0.99 m³ in Spring and the mean potential production were of 0.02 m³ of biogas/kg of substrate and 0.2 m³ of biogas/kg of manure for all seasons. The batch digesters reduced total and fecal coliforms densities in 99.99% and the CH4 contents in biogas were 88.3; 84.6; 80.6 and 79.2% for Summer, Autumn, Winter and Spring, respectively.

  19. Drug delivery system prepared by ionizing radiation of the N,N-dimethyl acrylamide with acryloyloxy-acetanilide copolymerization; Sistema de liberacao de droga obtido via radiacao ionizante pela copolimerizacao do N,N-dimetilacrilamida com 4-acriloiloxiacetanilida

    Energy Technology Data Exchange (ETDEWEB)

    Martellini, Flavia; Higa, Olga Z. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil); Queiroz, Alvaro A.A. de [Escola Federal de Engenharia de Itajuba, MG (Brazil); Rodighiero, Paolo [Universidade de Padova (Italy). Inst. de Ciencias Farmaceuticas

    1995-12-31

    Radiation induced polymerization has been used in biomaterials used in systems which such as drug delivery (DDS). This work describes the copolymerization of the monomers by gamma rays N,N-dimethyl acrylamide (DMAA) and acryloyloxy-acetanilide (AOA) for the immobilization of paracetamol, an analgesic and anti thermic drug. Dimethylformamide solutions were used in two concentrations of DMAA and AOA (F{sub DMAA/AOA} = 0,85/015 and 0,70/0,30, where F = molar fraction in the monomer feed). The samples were irradiated in the dose range of 30-800 Gy. The copolymer poly(DMAA-co-AOA) characterization was carried out by FTIR and {sup 1}HRMN. The hydrolysis was studied considering the formation of sodium salts of 4-hydroxy acetanilide at different times of treatment using colorimetric assay. (author). 6 refs., 5 figs.

  20. Perfil de beta talassemia heterozigota obtido a partir de análise data mining em banco de dados The profile of beta thalassemia obtained by data mining analysis in a database

    Directory of Open Access Journals (Sweden)

    Ana L. B. Domingos

    2010-02-01

    Full Text Available Variations in the phenotypic expression of heterozygous beta thalassemia reflect the formation of different populations. To better understand the profile of heterozygous beta-thalassemia of the Brazilian population, we aimed at establishing parameters to direct the diagnosis of carriers and calculate the frequency from information stored in an electronic database. Using a Data Mining tool, we evaluated information on 10,960 blood samples deposited in a relational database. Over the years, improved diagnostic technology has facilitated the elucidation of suspected beta thalassemia heterozygote cases with an average frequency of 3.5% of referred cases. We also found that the Brazilian beta thalassemia trait has classic increases of Hb A2 and Hb F (60%, mainly caused by mutations in beta zero thalassemia, especially in the southeast of the country.

  1. Machining tools in AISI M2 high-speed steel obtained by spray forming process; Ferramentas de usinagem em aco rapido AISI M2 obtido por conformacao por 'spray'

    Energy Technology Data Exchange (ETDEWEB)

    Jesus, Edilson Rosa Barbosa de. E-mail: erbjesus@usp.br

    2004-07-01

    The aim of the present work was the obtention of AISI M2 high-speed steel by spray forming technique and the material evaluation when used as machining tool. The obtained material was hot rolled at 50% and 72% reduction ratios, and from which it was manufactured inserts for machining tests. The performance of inserts made of the spray formed material was compared to inserts obtained from conventional and powder metallurgy (MP) processed materials. The spray formed material was chemical, physical, mechanical and microstructural characterised. For further characterisation, the materials were submitted to machining tests for performance evaluation under real work condition. The results of material characterisation highlight the potential of the spray forming technique, in the obtention of materials with good characteristics and properties. Under the current processing, hot rolling and heat treatments condition, the analysis of the results of the machining tests revealed a very similar behaviour among the tested materials. Proceeding a criterious analysis of the machining results tests, it was verified that the performance presented by the powder metallurgy material (MP) was slight superior, followed by conventional obtained material (MConv), which presented a insignificant advantage over the spray formed and hot rolled (72% reduction ratio) material. The worst result was encountered for the spray forming and hot rolled (50% reduction ratio) material that presented the highest wear values. (author)

  2. Structural characterization and photocatalytic analysis of BaFe{sub 2}O{sub 4} obtained at low temperatures; Caracterizacao estrutural e analise fotocatalitica de BaFe{sub 2}O{sub 4} obtido via sintese por combustao

    Energy Technology Data Exchange (ETDEWEB)

    Da Dalt, S.; Sousa, B.B.; Alves, A.K.; Bergmann, C.P., E-mail: silvana.da.dalt@ufrgs.b [Universidade Federal do Rio Grande do Sul (LACER/UFRGS), Porto Alegre, RS (Brazil). Dept. de Materiais. Lab. de Materiais Ceramicos

    2010-07-01

    Barium monoferrite BaFe{sub 2}O{sub 4} classified as permanent magnet stands out among other ceramic magnets due to its high chemical stability, corrosion resistance and low production cost. In addition, experiments conducted on photocatalytic degradation of methyl orange and UV transmittance by spectrophotometry showed that this material has photocatalytic properties. The spinel ferrite has importance in many technological areas as computing, communication and security. Many techniques for synthesis were studied to optimize the properties of this material. The synthesis of BaFe{sub 2}O{sub 4} by conventional processes often occurs at temperatures above 1000 deg C. In this work we obtained the phase BaFe{sub 2}O{sub 4} at low temperatures (600 deg C) from the combustion reaction using nitrates and maleic anhydride as metal complexing agent. Techniques of X-ray diffraction, specific surface area, thermogravimetry analysis and analysis photocatalytic were employed to characterize the products obtained. (author)

  3. Cor, betacaroteno e colesterol em gema de ovos obtidos de poedeiras que receberam diferentes dietas Color, beta-caroten and cholesterol in yolks of eggs by different diets of laying hens

    Directory of Open Access Journals (Sweden)

    Luciana Marino e Biscaro

    2006-12-01

    Full Text Available O ovo é um alimento considerado nutricionalmente completo, e contém quantidade significativa de nutrientes. Para os consumidores, a qualidade deste alimento está relacionada com o prazo de validade do produto e com as características sensoriais, como cor da gema e da casca. Poucos estudos foram efetuados no Brasil sobre a utilização de agentes pigmentantes e seus efeitos sobre a coloração das gemas e proporção e qualidade química dos componentes do ovo. Com base nisso, objetivou-se com este trabalho relacionar diferentes dietas com cor, quantidade de betacaroteno e teor colesterol das gemas dos ovos. Foram coletados ovos de poedeiras que receberam 4 diferentes tipos de ração. A cor foi medida em colorímetro Minolta, o beta-caroteno separado em coluna e medido em espectrofotômetro e o colesterol extraído com clorofórmio e quantificado por método colorimétrico. Os resultados mostraram que não há relação entre a cor e aumento do teor de betacaroteno das gemas dos ovos, mas a alimentação alterou a cor da gema. O teor de colesterol foi diferente (pEgg is a nutritional complete food, and content significant quantity of nutrients. For the consumers, the food quality is related with validity date of product and with sensorial characteristics, like yolk color and hull. Few studies were done in Brazil about utilization of colorfull agents and theirs effects in yolk color and chemical quality of egg compounds. The objective of this research was related different feeds with the color, beta-carotene and cholesterol amount of egg yolk. Eggs were caught of laying hens that received 4 feed types. The color measure was done by Minolta colorimeter, beta-carotene separated by column and spectrophotometer and cholesterol separated with chloroform and measured by colorimetric method. The results showed that there is not a relation between the color an increase of beta-carotene amount in the yolks, but feed altered the yolk color. Cholesterol amount was different (p<0,05 between treatments 1 and 3. The different feeds of laying hens altered color, but it did not relate with beta-carotene. The cholesterol in the yolk altered too.

  4. Isolamento, caracterização e diferenciação de células-tronco mesenquimais do líquido amniótico equino obtido em diferentes idades gestacionais

    Directory of Open Access Journals (Sweden)

    Bruna De Vita

    2013-04-01

    Full Text Available O interesse nas pesquisas com células-tronco derivadas de anexos fetais de diversas espécies cresceu exponencialmente nas últimas décadas em virtude de serem fontes de células-tronco adultas com potencial de diferenciação em diversas linhagens celulares que apresentam pouca ou nenhuma imunogenicidade, apresentando-se assim como alternativa de grande importância para a formação de bancos celulares. Apesar do crescente interesse, os estudos para espécie equina ainda são escassos. O objetivo deste trabalho foi isolar, caracterizar e diferenciar células-tronco mesenquimais (CTMs derivadas do líquido amniótico equino obtidas do terço inicial, médio e final da gestação (LA-CTMs, comparando suas características. Foram colhidas 23 amostras de líquido amniótico as quais foram submetidas às análises morfológica, imunocitoquímica, imunofenotípica por citometria de fluxo e às diferenciações osteogênica, adipogênica e condrogênica in vitro. Todas as amostras demonstraram adesão ao plástico e morfologia fibroblastóide. No ensaio imunocitoquímico as células de todos os grupos foram imunomarcadas para CD44, PCNA e vimentina com ausência de marcação para citoqueratina e Oct-4. Na citometria de fluxo observou-se a expressão de CD44 e CD90 e ausência de expressão de CD34, sendo que os marcadores CD44 e CD90 mostraram padrão de expressão decrescente em relação ao desenvolvimento gestacional. As amostras obtidas de todas as fases da gestação foram capazes de diferenciação nas linhagens osteogênica, condrogênica e adipogênica. Portanto, as células obtidas do líquido amniótico apresentaram características morfológicas, imunofenotípicas e potencial de diferenciação típicos das CTMs, demonstrando que a colheita pode ser realizada em qualquer fase gestacional. No entanto, mais pesquisas devem ser realizadas principalmente quanto à expressão de marcadores de pluripotencialidade (como o Oct-4 e ao seu potencial de diferenciação em linhagens extra mesodermais já relatados na literatura.

  5. A utilização de materiais obtidos pelo processo de sol-gel na construção de biossensores The utilization of materials obtained by the sol-gel process in biosensors construction

    Directory of Open Access Journals (Sweden)

    Antonio A. S. Alfaya

    2002-09-01

    Full Text Available The use of sol-gel materials to develop new biosensors has received great attention due to its characteristics and versatility of sol-gel process. An overview is presented of the state-of-the-art of electrochemical biosensors employing sol-gel materials. Low-temperature, porous sol-gel ceramics represent a new class for the immobilization of biomolecules. The rational design of sol-gel sensing materials, based on the judicious choice of the starting alkoxide, encapsulated reagents, and preparation conditions, allows tailoring of material properties in a wide range, and offers great potential for the development of electrochemical biosensors.

  6. Palm oil based polymer materials obtained by ROMP: study by low field NMR; Materiais polimericos obtidos via ROMP a partir de oleo de palma: estudo por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Henrique; Azevedo, Eduardo R. de; Lima-Neto, Benedito S., E-mail: benedito@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil)

    2015-07-01

    Aiming to study and develop new materials synthesized from sustainable sources, several polymers were prepared using in its monomeric composition, different amounts of NPO (Norbornenyl Palm Oil) monomer. This monomer was developed based on a vegetable oil rather produced in northern Brazil, the Palm Oil. Since this oil have a low content of unsaturation, its use in developing new monomer for ROMP (Ring-Opening Metathesis Polymerization) is not exploited. In this regard, polymeric materials were obtained using the NOP and both the reaction process and the resulting products were analyzed by Nuclear Magnetic Resonance in the time domain (TD-NMR) at low magnetic field. (author)

  7. Palm oil based polymer materials obtained by romp: study by low field NMR; Materiais polimericos obtidos via ROMP a partir de oleo de palma: estudo por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Henrique; Lima-Neto, Benedito S., E-mail: benedito@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica de; Azevedo, Eduardo R. de [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Fisica

    2013-07-01

    Aiming to study and develop new materials synthesized from sustainable sources, several polymers were prepared using in its monomeric composition, different amounts of NPO (Norbornenyl Palm Oil) monomer. This monomer was developed based on a vegetable oil rather produced in northern Brazil, the Palm Oil. Since this oil have a low content of unsaturation, its use in developing new monomer for ROMP (Ring-Opening Metathesis Polymerization) is not exploited. In this regard, polymeric materials were obtained using the NOP and both the reaction process and the resulting products were analyzed by Nuclear Magnetic Resonance in the time domain (TD-NMR) at low magnetic field. (author)

  8. Detection of occlusal caries lesions using fluorescence: correlation between histology and obtained results for Diagnodent and spectroscopy; Deteccao de lesoes de carie por fluorescencia: correlacao entre a histologia e os resultados obtidos com o Diagnodent e a espectroscopia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha-Cabral, Renata Maciel

    2006-07-01

    The aims of this study were to develop and test a method to detect caries lesions in vivo and in vitro, using a portable spectrometer (PS); to analyze the performance of PS as well as the commercial device Diagnodent (Dd); correlate them with the gold standard, their transversal section areas and lesions depth and between themselves. 66 occlusal pre-molars sites were examined in vivo with Dd. Sequentially, fluorescence ({lambda}exc {approx} 657 nm) was collected by an optical fiber, conducted to PS and then analyzed as spectra, which were normalized and had calculated the Ratios of their Areas Under the Curves (RAUC) of carious and sound tissues. Experiments were conducted in vitro in the same sites. Gold Standard was obtained by polarized light microscopy. Pearson correlation was used to compare the devices with transversal section area, lesions depth and between themselves. The area under ROC curve, sensitivity, specificity as well as accuracy were calculated and verified with McNemar test. Dd and RAUC showed statistically significant correlation with gold standard (p < 0.01 for Dd and p < 0.05 for RAUC) and between themselves (r = 0,83 in vivo and r = 0,87 in vitro). Although it was significant, the devices showed low correlation with depth of lesions in vivo and in vitro (r = {approx} 0.43). The transversal section area of the lesion had no influence on readings in both devices. Dd showed higher sensitivity (0.76) than PS (0.60) in vivo (p < 0.05), though this fact was not able to improve its performance. In turn, PS showed higher sensitivity (0.88) than Dd (0.79) in vitro, but this difference was not significantly. The other parameters did not show statistically significant differences (p < 0.05) between methods. PS showed positive correlation with Dd, equal correlation with lesions depth and higher ability of detecting the disease in vitro, what suggests that if accompanied with a conic and an angulated probe and a dedicated software, the PS method could be useful in clinics in the near future. (author)

  9. Nanocomposite biofilms obtained from Whitemouth croaker (Micropogonias furnieri) protein isolate and Montmorillonite: evaluation of the physical, mechanical and barrier properties; Biofilmes nanocompositos obtidos de isolado proteico de corvina (Micropogonias furnieri) e Montmorilonita: avaliacao das propriedades fisicas, meanicas e de barreira

    Energy Technology Data Exchange (ETDEWEB)

    Cortez-Vega, William Renzo, E-mail: williamvega@ufgd.edu.br [Universidade Federal da Grande Dourados (UFGD), MS (Brazil). Fac. de Engenharia; Bagatini, Daniela Cardozo; Souza, Juliana Tais Andreghetto de; Prentice, Carlos [Universidade Federal do Rio Grande (FURG), RS (Brazil). Escola de Quimica e Alimentos

    2013-06-15

    The objective of this study was to evaluate the properties of nanocomposite biofilms based on Whitemouth croaker (Micropogonias furnieri) protein isolate with organophilic clays. Initially the croaker protein isolate (CPI) was obtained using the pH shifting process from by-products of croaker industrialization. A Box and Behnken experimental design was used to develop the films, with three levels of CPI (2, 3.5 and 5 g.100 g{sup -1} solution), montmorillonite MMT clay (0.3, 0.5 and 0.7 g.100 g{sup -1} solution) and glycerol (25, 30 and 35 g.100g{sup -1} CPI). The polymeric films were produced by the 'casting technique'. The tensile strength values ranged from 7.2 to 10.7 MPa and the elongation values from 39.6 to 45.8 %. The water vapor permeability (WVP) values ranged from 3.2 to 5.5 (g.mm.m{sup -2}.d{sup -1}) and the CPI had an average protein content of 97.87 % protein (d. b.). It was concluded that the nanocomposite films produced from CPI with MMT were promising from the standpoint of their mechanical properties, visual appearance and easy handling, as well as for their low water vapor permeability and low water solubility. With respect to their mechanical properties, the concentrations of CPI and MMT were the main factors influencing the development of the nanocomposite films. The results obtained from the experimental design indicated that 3.5 g of CPI.100 g{sup -1}solution, 0.5 g of MMT.100 g{sup -1} solution and 30 g of glycerol.100 g{sup -1} CPI would be the ideal parameters for the development of nanocomposite films by 'casting'. (author)

  10. Characterization of TiO{sub 2} thin films obtained by metal-organic chemical vapour deposition; Caracterizacao de filmes finos de TiO{sub 2} obtidos por deposicao quimica em fase vapor

    Energy Technology Data Exchange (ETDEWEB)

    Carriel, Rodrigo Crociati

    2015-07-01

    Titanium dioxide (TiO{sub 2}) thin films were grown on silicon substrate (100) by MOCVD process (chemical deposition of organometallic vapor phase). The films were grown at 400, 500, 600 and 700 ° C in a conventional horizontal equipment. Titanium tetraisopropoxide was used as source of both oxygen and titanium. Nitrogen was used as carrier and purge gas. X-ray diffraction technique was used for the characterization of the crystalline structure. Scanning electron microscopy with field emission gun was used to evaluate the morphology and thickness of the films. The films grown at 400 and 500°C presented anatase phase. The film grown at 600ºC presented rutile besides anatase phase, while the film grown at 700°C showed, in addition to anatase and rutile, brookite phase. In order to evaluate the electrochemical behavior of the films cyclic voltammetry technique was used. The tests revealed that the TiO2 films formed exclusively by the anatase phase exhibit strong capacitive character. The anodic current peak is directly proportional to the square root of the scanning rate for films grown at 500ºC, suggesting that linear diffusion is the predominant mechanism of cations transport. It was observed that in the film grown during 60 minutes the Na+ ions intercalation and deintercalation easily. The films grown in the other conditions did not present the anodic current peak, although charge was accumulated in the film. (author)

  11. Atividade de extratos de Arrabidaea chica (Humb. & Bonpl. Verlot obtidos por processos biotecnológicos sobre a proliferação de fibroblastos e células tumorais humanas

    Directory of Open Access Journals (Sweden)

    Denise Taffarello

    2013-01-01

    Full Text Available Arrabidaea chica (H&B Verlot is a plant popularly known as Pariri and this species is a known source of anthocyanins, flavonoids and tannins. This report describes an approach involving enzymatic treatment prior to extraction procedures to enhance A chica crude extract anticancer activity. Anticancer activity in human cancer cell lines in vitro using a 48 h SRB cell viability assay was performed to determine growth inhibition and cytotoxic properties. The final extraction yield without enzyme treatment was higher (24.28% compared to the enzyme-treated material (19.03%, with an enhanced aglycones anthocyanin ratio as determined by HPLC- DAD and LC-MS with direct infusion.

  12. Comparação de parâmetros biomecânicos obtidos na análise da influência da carga transportada: backpack, doublebackpack

    OpenAIRE

    Vieira, Paula Maria Neto

    2016-01-01

    A utilização da mochila durante a marcha tem provocado um grande interesse em muitos investigadores, pois o uso de carga nas mochilas e os problemas que isso pode acarretar tem gerado algumas discussões. O objetivo deste estudo foi analisar a marcha ao utilizar carga em mochilas bilaterais de modo a verificar se compensa ou não aos indivíduos andar com este tipo de mochilas. Para isso recorreu-se a métodos de análise como a termografia, cinemática e eletromiografia. Para a realização deste...

  13. New biotypes of Metarhizium anisopliae var. anisopliae E9 strain with altered conidial germination, obtained by exposition to gamma radiation; Novos biotipos de Metarhizium anisopliae var. anisopliae (Metsch.) Sorokin com germinacao alterada de conidios, obtidos pela exposicao a radiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, M.G.; Oliveira, N.T.; Luna Alves Lima, E.A. [Pernambuco Univ., Recife, PE (Brazil). Centro de Ciencias Biologicas. Dept. de Micologia

    1997-12-31

    Conidia produced by a wild strain (E9) of the entomopathogenic fungus M. anisopliae var anisopliae were exposed to gamma radiation in order to obtain new biotypes. At the 390 Gy dose there were obtained 48 colonies (MaE). On complete medium, 5 colonies (MaE 01, MaE 10, MaE 15, MaE 40) presented morphological changes in color while the colony MaE 24 lost its esporulation capacity. Twenty six colonies presented mycelial growth significantly different from the wild strain, after 12 days of incubation. Twelve colonies showed average of conidial germination different from the wild strain, after 12 days of incubation on liquid minimum medium at 25 deg C. The colony MaE started germination precociously after 5 hours of incubation. (author) 31 refs., 1 fig., 4 tabs.

  14. Dose profile for electron beams obtained with CaSO{sub 4}:Ce,Eu thermoluminescent dosimeters; Perfil de dose de feixes de eletrons obtidos com dosimetros termoluminescentes de CaSO{sub 4}:Ce,Eu

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br [Instituto de Pesquisas Energerticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2012-12-15

    The calcium sulphate activated with cerium and europium (CaSO{sub 4}:Ce,Eu) thermoluminescent dosimeters (TLD) recently developed at Nuclear and Energy Research Institute as well as the calcium sulphate activated with dysprosium (CaSO{sub 4}: Dy) and lithium fluoride activated with magnesium and titanium, (LiF:Mg,Ti; TLD-100) TLDs, with long term applications in dosimetry and considered as standards, were used to obtain the dose profile for 3.43, 5.48, 8.27 and 11.67 MeV electron beams generated by a linear accelerator Clinac 2100-C (Varian) in the reference conditions defined by the TRS-398 code of practice. The routine dosimetry of the electron beams, performed with a calibrated ionization chamber, ensures that the electron beams fulfill the requirements of flatness and symmetry established in this code of practice. Thus, as the TRS-398 Code of Practice requirements are fulfilled by the measurements performed with the new TLD type, CaSO{sub 4}:Ce,Eu may be applied in clinical dosimetry of high energy electron beams. (author)

  15. Adaptação sócio-comunicativa no espectro autístico: dados obtidos com pais e terapeutas Social communicative adaptation in the autistic spectrum: data provided by parents and therapists

    Directory of Open Access Journals (Sweden)

    Priscilla Faria Sousa-Morato

    2009-01-01

    Full Text Available OBJETIVO: Verificar a efetividade da aplicação do protocolo de adaptação sócio-comunicativa a diferentes fontes de informação, neste caso, pais e terapeutas, na identificação de diferenças individuais em crianças com Distúrbios do Espectro Autístico. MÉTODOS: Participaram deste estudo 48 crianças, entre três anos e 11 anos e dez meses de idade, com diagnóstico clínico incluído no espectro autístico. Foram também sujeitos deste trabalho, 46 mães e dois pais, bem como 15 terapeutas, responsáveis legais e pelo atendimento fonoaudiológico especializado, respectivamente, das mesmas crianças, por um período mínimo de aproximadamente 12 meses, sendo que estes participaram respondendo a um questionário sobre o relacionamento social das crianças, sujeitos deste estudo. RESULTADOS: Genericamente, pode-se dizer que as respostas sobre a adaptação sócio-comunicativa, obtidas por meio de diferentes fontes de informação, ou seja, pais e terapeutas foram semelhantes. Entretanto, analisando os dados brutos observa-se que os pais apresentaram consistentemente um número maior de respostas positivas do que as terapeutas, para as questões relativas ao desempenho social. CONCLUSÃO: O estabelecimento de dados de adaptação sócio-comunicativa pode caracterizar esta população, demonstrando que este instrumento pode ser aplicado a diferentes informantes; as respostas dadas pelos mesmos foram homogêneas, reforçando a fidedignidade dos dados, apesar de existirem diferenças significativas na comparação entre os níveis e estágios sócio-comunicativos. A aplicação do questionário e protocolo de adaptação sócio-comunicativa a diferentes informantes pode fornecer um resultado bastante homogêneo, sendo possível realizar de forma fidedigna a caracterização das habilidades de relacionamento social dessas crianças.PURPOSE: To verify if the application of the social-communicative adaptation protocol with different information sources, in this case, parents and therapists, is effective to identify individual differences in children of the autistic spectrum. METHODS: Subjects were 48 children, with ages ranging from three to 11 years and ten months, with psychiatric diagnosis included in the autistic spectrum. The parents of those children (46 mothers and two fathers and 15 speech therapists, who were, respectively, legal caregivers and responsible for their speech-language therapy for at least 12 months, were also subjects of the study. They answered a questionnaire regarding each child's social relation performance. RESULTS: Generically, it is possible to say that the answers obtained from different sources (parents and therapists were similar. However, the analysis of raw data showed that parents consistently presented higher number of positive answers when compared to therapists, in questions regarding social performance. CONCLUSION: The determination of data about social-communicative adaptation could characterize these subjects, demonstrating that this protocol can be used with different information sources; the answers provided by parents and therapists were homogeneous, confirming data reliability despite of significant differences in the comparison among social-communicative stages and levels. The application of the questionnaire and the social communicative protocol to different information sources can provided homogeneous results, allowing a reliable characterization of these children's social abilities.

  16. Qualidade de cajus-de-mesa obtidos nos sistemas de produção integrada e convencional Post-harvest quality of the cashew apples gotten in the integrated fruit production and the conventional cropping systems

    Directory of Open Access Journals (Sweden)

    Ana Paula Silva de Andrade

    2008-03-01

    Full Text Available O cajueiro (Anacardium occidentale L. é uma planta de grande importância econômica para o Nordeste brasileiro, pela diversidade de produtos proporcionados pelo fruto e pedúnculo e pela quantidade de empregos gerados. Apesar disso, inexiste uma padronização nos sistemas de produção empregados, com reflexos negativos na produção e qualidade da matéria-prima destinada ao consumo in natura e à indústria. A conversão dos sistemas de produção vigentes para o sistema de produção integrada poderá contribuir para atenuar esse quadro. O objetivo deste trabalho foi comparar os sistemas de produção integrada e convencional para cajueiro-anão precoce quanto à qualidade do pedúnculo. O experimento foi instalado em um pomar comercial, localizado no município de Beberibe (CE, numa área de aproximadamente 1,0 ha, onde foram desenvolvidos os sistemas de Produção Integrada (PI e Convencional (PC. Cada um ocupou uma área de 0,5 ha, separados entre si por uma bordadura composta de cinco fileiras de plantas. No sistema PI, foram aplicadas as práticas recomendadas nas Normas Técnicas de Produção Integrada de Caju. No PC, foram aplicadas as práticas comumente utilizadas pelo produtor. Foram avaliados cor da película, firmeza de polpa, sólidos solúveis totais (SST, acidez total titulável (AT, teor de vitamina C e pH. Para essas variáveis, foram estimadas médias a partir das 12 amostras obtidas nos dois tratamentos, que foram comparadas, utilizando-se do teste t (PThe cashew tree (Anacardium occidentale L. is a plant of great importance for the Brazilian Northeast Region, due to the diversity of products generated for the fruit and peduncle and the amount of generated jobs. Despite this, there is no standardization in the cropping systems presently used, with negative consequences in the yield and quality of the raw material for consumption and for industry. The conversion of traditional orchards to the integrated fruit production systems will contribute to minimize this scenery. The objective of this work was to compare the integrated fruit production (IFP and conventional cropping production (CP systems in dwarf cashew orchard, as to apple quality. The experiment was installed in a commercial orchard, located in Beberibe Country, State of Ceará, Brazil, in an area of 1.0 hectare, where the IFP and CP systems had been developed. Each system had occupied 0.5 hectare, separated by five crop lines of plants. In the IFP system, cropping practices were applied according to the Legal Marks of Integrated Fruit Production in Brazil. In CP system, cropping practices were applied accordingly with common used by local growers. Apple color, firmness, soluble solids (SS, titratable acidity (TA, vitamin C content and pH were evaluated. For these variables, means were estimated from twelve samples obtained in both treatments, which were compared by test t (P<0.05. For the TA and vitamin C content variable, the IFP system was significantly superior to the CP ones. For the pH variable, a significant difference was observed between the averages of the systems, being the value gotten in the CP superior to the one of the IFP. The cashew apples obtained in the IFP system showed better quality. The post-harvest quality of the cashew apples had been influenced by the production systems.

  17. Comparação dos valores de débito cardíaco obtidos por termodiluição e dopplerfluxometria transesofágica Comparison between two methods for hemodynamic measurement: thermodilution and oesophageal doppler

    Directory of Open Access Journals (Sweden)

    Roberto Manara Victorio Ferreira

    2007-08-01

    Full Text Available OBJETIVO: A termodiluição (TD é padrão de monitorização hemodinâmica. Alguns par��metros hemodinâmicos podem ser medidos através do Doppler Transesofágico (DTE. Método simples, menos invasivo. Com o objetivo de avaliar a acurácia do DTE foram comparados TD e DTE na determinação de medidas de débito cardíaco (DC. MÉTODOS: Foram determinadas 192 medidas simultâneas, em diferentes situações clínicas em dez pacientes com idade entre 21 85 anos (cinco do gênero masculino e cinco do feminino, oito internados sépticos em uso de drogas vasoativas e dois monitorizados para laringectomia e transplante hepático; todas avaliadas ao longo de quatro horas, em intervalos de 30 minutos. Foram utilizados dois tipos de doppler: o DeltexR, e o ArrowR, introduzidos entre 35 e 45 cm da fossa nasal e localizados no ponto de maior diâmetro da aorta descendente. Na TD, foi utilizado cateter de artéria pulmonar (Swan Ganz BaxterR e monitor DX-2001R, confirmado o posicionamento radiologicamente e através das curvas pressóricas geradas. As medidas do DC realizadas através da TD foram obtidas com soro fisiológico gelado, sendo considerada a média de quatro medidas não diferentes de 5%. Foi aplicado o método estatístico de Bland e Altman, com utilização de gráfico de regressão linear. RESULTADOS: Não houve diferença estatisticamente significante entre esses dois métodos de medida hemodinâmica, com coeficiente de correlação de 0,88 para o DC (Doppler DeltexR X Swan Ganz BaxterR e coeficiente de correlação de 0,99 DC (Doppler Arrow rR X Swan Ganz BaxterR respectivamente, observando-se correlação. CONCLUSÃO: A medida das variáveis hemodinâmicas ao DTE foi obtida com facilidade nos dez pacientes estudados e revelou ter este dispositivo acurácia compatível à TD.OBJECTIVES: Thermodilution (TD is the "gold standard method" for hemodynamic monitoring. Some parameters can be measured by Oesophageal Doppler (OD, which is simpler and less invasive. To evaluate the accuracy of OD, we compared this method with TD in measurement of cardiac output (CO. METHODS: One hundred and ninety two simultaneous measurements were made in 10 patients (5 male and 5 female with different clinical situations, 8 with sepsis using vasoactive drugs and 2 monitored for laryngectomy and liver transplantation. Measurements were taken during 4 hours at 30 minute intervals. The two oesophageal dopplers used DeltexR and ArrowR, were introduced between 35 and 45 cm from the nose and located at the point of largest diameter of the descending aorta. In TD, we used the pulmonary artery catheter (Swan Ganz BaxterR and the DX- 2001 monitorR positioning was confirmed with support of radiology and of pressures curves. Measurements of CO carried out by means of TD were achieved using an iced saline solution considering the mean of four measurements with less than a 5% difference. The statistical method used was the Bland-Altman scatter plot and dispersion graphic. RESULTS: No statistically significant difference was found between the two methods for hemodyamic measurement with a correlation coefficient of 0.8 for CO (Deltex DopplerR and Baxter Swan GanzR and a correlation coefficient of 0.99 for CO (Arrow DopplerR and Baxter Swan GanzR. CONCLUSION: Homodynamic measurements with OD have the same accuracy as those with TD and were easily obtained in the 10 patients.

  18. MUTANTES DE LARANJA - 'PÊRA' COM NÚMERO REDUZIDO DE SEMENTES, OBTIDOS ATRAVÉS DE MUTAÇÕES INDUZIDAS SWEET ORANGE 'PÊRA' MUTANTS WITH LOW NUMBER OF SEEDS OBTAINED THROUGH MUTATION INDUCTION

    Directory of Open Access Journals (Sweden)

    RODRIGO ROCHA LATADO

    2001-08-01

    Full Text Available A obtenção de cultivares de citros com pequeno número de sementes é importante quando o objetivo é a produção de frutas para o consumo in natura. O objetivo deste trabalho foi o de avaliar, por três anos (1997, 1998 e 1999, o número médio de sementes e 15 outras características agronômicas, de 127 mutantes putativos de laranja-'Pêra', selecionados após irradiação de borbulhas com raios-gama e 8 plantas selecionadas do controle não irradiado. Os mutantes foram divididos em 16 grupos baseados nos tipos de mutações observados e em cada grupo, como controle comum, foram incluídas plantas de laranja-'Pêra' comercial. Observou-se que 46 mutantes putativos e uma planta do controle não irradiado (PSC apresentaram redução significativa no número de sementes por fruto, nos três anos consecutivos, sendo que 15 mutantes apresentaram frutos com média entre uma e duas sementes e 9 mutantes, frutos com média inferior a uma semente. Dentre estes 9 mutantes, os de número 27, 28 e 58, que apresentaram também alterações significativas no diâmetro de copa ou na altura de planta, além do 59 e 101, que não apresentaram alterações nas outras 15 características avaliadas, possuem um maior potencial para serem lançados como novos mutantes de laranja-'Pêra' com pequeno número de sementes.Citrus varieties with low number of seeds are important for in natura fruit market. The objective of the present work was to evaluate, for three years (1997, 1998 and 1999, the average number of seeds per fruit and 15 other agronomic characteristics of 127 putative mutated clones of sweet orange 'Pêra', selected after gamma-irradiation of budwood and 8 non irradiated control clones. Mutants were divided in 16 groups based on the type of mutation observed 'Pêra' commercial control plants (PCC were included. It was observed that 46 putative mutants and one non-irradiated plant (PSC showed significant reduction in seed number per fruit. Fifteen mutants had 1 -- 2 seeds on an average and 9 mutants less than one seed per fruit. Among them, the mutants 27, 28 and 58 showed other significant changes in the tree crown diameter or plant height. The mutants 59 and 101 showed no significant differences in the other 15 characteristics evaluated, indicating that they have a good potential to be released as new sweet orange 'Pêra' mutants with low number of seeds.

  19. Estimulação Magnética Transcraniana na depressão: resultados obtidos com duas aplicações semanais Transcranial Magnetic Stimulation in depression: results of bi-weekly treatment

    Directory of Open Access Journals (Sweden)

    Raphael Boechat-Barros

    2004-06-01

    Full Text Available OBJETIVO: A Estimulação Magnética Transcraniana (EMT tem se mostrado útil como forma terapêutica para a depressão. Este artigo avalia os resultados da aplicação da EMT de baixa freqüência, duas vezes por semana, durante quatro semanas, em 10 pacientes com depressão, não responsivos ou intolerantes à utilização de antidepressivos. MÉTODOS: Trata-se de um estudo descritivo, ou não controlado, do tipo série de casos. Para diagnosticar a depressão, foram utilizados os critérios do DSM-IV. Com o intuito de avaliar uma possível melhora, utilizamos a escala de Hamilton-17 itens em três momentos: no início, meio e final do tratamento. Para análise estatística dos resultados, utilizamos o teste x², de Friedman. RESULTADOS: Foi observada melhora > 50% na escala em cinco pacientes e > 75% em três destes ao longo de todo o tratamento. CONCLUSÕES: O emprego da EMT de baixa freqüência, aplicada duas vezes por semana, pode ser seguro, prático e eficaz no tratamento da depressão, como um coadjuvante ao antidepressivo. Porém, não podemos afirmar se o efeito clínico apresentado se deve a uma potencialização dos antidepressivos ou a um efeito direto da EMT, já que esta não foi testada isoladamente.OBJECTIVE: Transcranial Magnetic Stimulation (TMS has been shown to be a useful therapy for depression. This paper evaluates the results of bi-weekly low-frequency TMS of 4 weeks duration, in 10 patients with depression who do not respond or are intolerant to antidepressive medication. METHODS: This is a case series study. DMS-IV criteria were used to diagnose depression. In order to disclose possible improvements in depressive symptoms, the 17 items Hamilton scale was used at three different moments: at the beginning, middle and end of the treatment period. Results were analysed using Friedman's x² test. RESULTS: Hamilton's scale score improvement was > 50% in five patients and > 75% in 3 of these. CONCLUSIONS: TMS may be efficacious, safe and easily performed as an adjunct to medical treatment of depression. We cannot differentiate a potentiation of the effect of antidepressive medication from an intrinsic effect of TMS alone, since we did not treat any subjects without the concurrent use of medication.

  20. Morphological and structural evolution of the anatase phase of silicon modified titanium dioxide obtained by Sol-gel; Evolucao estrutural e morfologica da fase anatase de dioxido de titanio modificada com silicio obtido pelo Metodo Sol-Gel

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, S.A.; Oliveira, C.T.; Ciola, R.A.; Cavalheiro, A.A., E-mail: silvanicelopes@gmail.com [Universidade Estadual de Mato Grosso do Sul (CPTREN/UEMS), Navirai, MS (Brazil). Centro de Pesquisas Tecnologicas em Recursos Naturais

    2011-07-01

    The photonic efficiency of the titanium dioxide photocatalyst is dependent on the crystalline structure and the anatase phase presents high efficiency in the border region between the UV-B and UV-A, with a redox potential sufficient to generate hydroxyl radicals and superoxide ion in order to oxidate organic compounds. In spite of the organic matter degradation effectiveness, the efficiency can be reduced substantially due to the presence of crystalline defects, which act as premature recombination centers of the electron-hole pair. The increasing of calcining temperature allows the elimination of most of these defects, but the structural ordering at temperatures around 600°C eventually leads to the phase transition toward rutile, which is not photoactive. In this work, it was demonstrated through FTIR and XRD that the silicon modifier presence stabilizes the anatase phase even at temperatures as high as 900°C. (author)

  1. Effect of the calcining temperature on the porosity of the titanium dioxide powders obtained by Polymeric Precursor Method; Efeito da temperatura de calcinacao na porosidade de pos de dioxido de titanio obtidos pelo Metodo dos Precursores Polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, D.W.; Granado, S.R.; Ciola, R.A.; Cavalheiro, A.A., E-mail: douglas_levis@hotmail.com [Universidade Estadual de Mato Grosso do Sul (CPTREN/UEMS), Navirai, MS (Brazil). Centro de Pesquisas Tecnologicas em Recursos Naturais

    2011-07-01

    Ceramics materials obtained by Polymeric Precursor Method exhibit mechanisms of the pore formation and elimination dependents on the decomposition kinetics of the residual organic matter of the polyester. The mechanism of pore elimination seems to occur by disrupting of the wall among the pores because it leads to the consequent pore coalescence and increasing in pore volume, which posses higher pore diameters. In this case, it was observed that the porosity decreasing occurs by pore wall moving after that the residual organic matter is eliminated from the pore inside. The pore diameter associated to the highest volume desorption occurred for the material obtained after calcining at 450°C is approximately 1,7 nm, what seems to be related to the amorphous carbon accumulated inside the pores, once that the pore volume decreases more effectively for the material obtained by calcining at 550°C, making the maximum volume situates at 2,0 nm. (author)

  2. Avaliação de géis obtidos a partir da acetilação da quitosana em meio heterogêneo Evaluation of gels obtained from acetylation of chitosan in heterogeneous medium

    Directory of Open Access Journals (Sweden)

    Rosangela Balaban Garcia

    2008-01-01

    Full Text Available Chitosan was acetylated during 2, 5 and 10h and physical gels were obtained at different polymer concentrations in N,N-dimethylacetamide containing 5% of LiCl. Acetylation was confirmed by infrared spectroscopy and 13C NMR, and degrees of acetylation in the range of 0.82-0.91 were determined by NMR. The O-acetylation degree (0.12-0.15 was exclusively determined by a volumetric method. Rheological studies showed that the storage modulus values were smaller for the more acetylated samples and increased with the temperature and the polymer concentration. All the gels presented storage modulus superior to loss modulus, evidencing more elastic than viscous characteristics. The results obtained in this work suggest a gelation process based on a balance between O and N-acetylation and intermolecular bonds.

  3. Characterization of an ecological binder for mortars obtained from recycling of ladle furnace slag; Caracterizacao de aglomerante ecologico para argamassas obtido a partir da reciclagem de escoria de forno panela

    Energy Technology Data Exchange (ETDEWEB)

    Marinho, A.B.; Santos, C.M.; Fontes, W.C.; Matias, A.C.P.; Brigolini, G.J.; Peixoto, R.A.F. [Universidade Federal de Ouro Preto (UFOP), MG (Brazil). Departamento de Engenhaira Civil; Carvalho, J.F., E-mail: josemaria.carvalho@ufv.br [Universidade Federal de Vicosa (UFV), MG (Brazil). Departamento de Engenharia Civil

    2016-07-01

    A sustainable binder obtained from recycling of a ladle furnace slag from Piracicaba, Sao Paulo, was produced in Laboratory of Construction Materials of Federal University of Ouro Preto (UFOP). A characterization work was performed and the results are presented. The physical, chemical and mineralogical properties was obtained using, among others, the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRD) with Rietveld refining method, optical microscopy and Scanning electronic microscopy (SEM) with energy dispersive spectroscopy (EDS). The chemical analysis showed predominance of CaO and SiO{sub 3}; the mineralogical analysis pointed the predominant presence of calcium-olivine, merwinite and pyroxene and; the images showed predominance of angulous and elongated grains. According to results, the material was classified as a hydraulic binder, with characteristics comparable to hydraulic limes. (author)

  4. Caracterização química de extratos de Ocimum basilicum L. obtidos através de extração com CO2 a altas pressões

    Directory of Open Access Journals (Sweden)

    Marcio Mazutti

    2006-12-01

    Full Text Available This work reports extraction yield and chemical characterization of the extracts obtained by high-pressure CO2 extraction of a cultivar of Ocimum basilicum L. The experiments were performed in the temperature range of 20 to 50 °C, from 100 to 250 atm of pressure. Chemical analyses were carried out by gas chromatography coupled to mass spectrometry, permitting to identify 23 compounds that were grouped into five chemical classes. Results showed that temperature and solvent density influenced positively the extraction yield. At 20 °C and 0.41 g cm-3 occurred a rise in the concentration of monoterpenes, oxygenated monoterpenes, sesquiterpenes and oxygenated sesquiterpenes.

  5. Mechanical properties and total hydroxycinnamic derivative release of starch/glycerol/Melissa officinalis extract films

    Directory of Open Access Journals (Sweden)

    Letícia Mello Rechia

    2010-09-01

    Full Text Available The aim of this study was to investigate the mechanical properties of starch/glycerol/Melissa officinalis, a topical drug delivery system for labial herpes treatment. Four films were prepared with different concentrations of starch, glycerol, and Melissa officinalis extract. The results revealed that increasing the glycerol concentration in the film reduced elasticity modulus and tensile strength, exhibiting a plasticizing effect. The increase in free volume resulted in increased release of hydroxycinnamic derivatives expressed as rosmarinic acid.O objetivo deste trabalho foi estudar as propriedades mecânicas e o mecanismo de liberação de um sistema tópico de liberação prolongada para o tratamento do Herpes labial a partir de filmes de amido/glicerol/extrato de Melissa officinalis, planta com comprovada atividade antiviral. Foram obtidos quatro filmes poliméricos com diferentes concentrações de amido, glicerol e extrato de Melissa officinalis os quais foram caracterizados mecanicamente e determinado o perfil de liberação de derivados hidroxicinâmicos. Os resultados demonstraram que o aumento da concentração de glicerol no filme produz uma redução no módulo de elasticidade e na tensão de deformação como conseqüência do efeito plastificante. O aumento no volume livre do polímero resultou em aumento da liberação dos derivados hidroxicinâmicos expressos como ácido rosmarínico.

  6. Phosphategypsum wastes in Venice lagoon. Radiological impact; Le discariche di fosfogessi nella laguna di Venezia. Valutazioni preliminari dell'impatto radiologico

    Energy Technology Data Exchange (ETDEWEB)

    Belli, M; Blasi, M; Guogang, J.; Rosamilia, S.; Sansone, U. [Agenzia Nazionale per la Protezione dell' Ambiente, Rome (Italy); Biancotto, R.; Bidoli, P.; Sepulcri, D. [Agenzia Regionale di Prevenzione e Protezione del Veneto, Venice (Italy). Dipt. provinciale di Venezia; Cavolo, F. [Smilax, Mira, VE (Italy)

    2000-07-01

    The phosphoric minerals utilized in phosphoric acid production, presents high concentrations of radioactive materials: U238, Th 232, K 40. The phosphogypsum is the waste material obtained in the phosphoric acid production in wet process. This type of production method is employed for many years in Venice lagoon (Porto Marghera chemical plants). In this paper are reported evaluations of radiological impact on aquatic environment of lagoon. [Italian] Con il termine di fosfogessi si intende comunemente il materiale di risulta che si ottiene nella produzione di acido fosforico attraverso la via umida (attacco acido). Questa tipologia di produzione che ha operato per diversi decenni a Porto Marghera, e' finalizzata allo scopo di ottenere acido fosforico principalmente per l'industria dei fertilizzanti e quindi come prodotto intermedio per la chimica e per le preparazioni alimentari. Il fosforo, elemento principale della reazione, era ricavato da rocce fosfatiche di origine sedimentaria marina provenienti per lo piu' dall'Africa settentrionale. Il sistema produttivo utilizzato negli impianti di Porto Marghera era basato su una reazione principale, che partendo dal minerale attraverso un attacco acido, produceva acido fosforico: Ca{sub 3}(PO{sub 4}){sub 2} (Minerale Fosforico) + 3H{sub 2}SO{sub 4} (Acido Solforico) + 3H{sub 2}O (Acqua) {yields} 2H{sub 3}PO{sub 4} (Acido fosforico) + 3CaSO{sub 4}H{sub 2}O (Solfato di calcio (gesso)). In particolare il minerale era preventivamente macinato e vagliato, quindi si procedeva alla sua miscelazione con l'acido fosforico ed alla successiva reazione del composto ottenuto.

  7. FOOD SAFETY AND QUALITY IN DEVELOPING COUNTRIES: THE ROLE OF LACTIC ACID BACTERIA

    OpenAIRE

    ANGRI, MATTEO

    2016-01-01

    La sicurezza e la qualità degli alimenti sono tutt’ora un problema critico per i paesi in via di sviluppo. Le diete a basso contenuto di acido folico, per esempio, possono causare gravi problemi di salute, soprattutto nei bambini. Gravi disturbi legati al tubo neurale (DTN) nei neonati possono derivare infatti da madri che hanno insufficiente apporto di acido folico (400-600 g / giorno) durante il periodo di gravidanza. Inoltre, se non adeguatamente protetti o trattati, I prodotti alimentari ...

  8. Mechanical behaviour of AlSiC nano composites produced by ball milling and spark plasma sintering =

    Science.gov (United States)

    Buchheim, Claudia Sofia de Andrade Redondo Murilhas

    Neste trabalho foram produzidos nanocompositos de AlSiC misturando aluminio puro com nano particulas de SiC com diâmetro de 45 - 55 nm, usando, de forma sequencial, a tecnica da metalurgia do po e a compactacao por "Spark Plasma Sintering". O composito obtido apresentava graos com 100 nm de diâmetro, encontrandose as particulas de SiC localizadas, principalmente, nas fronteiras de grao. O nanocomposito sob a forma de provetes cilindricos foi submetido a testes de compressao uniaxial e a testes de nanoindentacao para analisar a influencia das nanoparticulas de SiC, da fracao volumica de acido estearico e do tempo de moagem, nas propriedades mecânicas do material. Para efeitos de comparacao, utilizouse o comportamento mecânico do Al puro processado em condicoes similares e da liga de aluminio AA1050O. A tensao limite de elasticidade do nanocomposito com 1% Vol./Vol. de SiC e dez vezes superior a do AA1050. O refinamento de grao a escala nano constitui o principal mecanismo de aumento de resistencia mecânica. Na realidade, o Al nanocristalino sem reforco de particulas de SiC, apresenta uma tensao limite de elasticidade sete vezes superior a da liga AA1050O. A adicao de 0,5 % Vol./Vol. e de 1 % Vol./Vol. de SiC conduzem, respetivamente, ao aumento da tensao limite de elasticidade em 47 % e 50%. O aumento do tempo de moagem e a adicao de acido estearico ao po durante a moagem conduzem apenas a um pequeno aumento da tensao de escoamento. A dureza do material medida atraves de testes de nanoindentacao confirmaram os dados anteriores. A estabilidade das microestruturas do aluminio puro e do nanocomposito AlSiC, foi testada atraves de recozimento de restauracao realizado as temperaturas de 150 °C e 250 °C durante 2 horas. Aparentemente, o tratamento termico nao influenciou as propriedades mecânicas dos materiais, excepto do nanocomposito com 1 % Vol./Vol. de SiC restaurado a temperatura de 250 °C, para o qual se observou uma reducao da tensao limite de elasticidade

  9. A comparison of exogenous and endogenous CEST MRI methods for evaluating in vivo pH.

    Science.gov (United States)

    Lindeman, Leila R; Randtke, Edward A; High, Rachel A; Jones, Kyle M; Howison, Christine M; Pagel, Mark D

    2018-05-01

    Extracellular pH (pHe) is an important biomarker for cancer cell metabolism. Acido-chemical exchange saturation transfer (CEST) MRI uses the contrast agent iopamidol to create spatial maps of pHe. Measurements of amide proton transfer exchange rates (k ex ) from endogenous CEST MRI were compared to pHe measurements by exogenous acido-CEST MRI to determine whether endogenous k ex could be used as a proxy for pHe measurements. Spatial maps of pHe and k ex were obtained using exogenous acidoCEST MRI and an endogenous CEST MRI analyzed with the omega plot method, respectively, to evaluate mouse kidney, a flank tumor model, and a spontaneous lung tumor model. The pHe and k ex results were evaluated using pixelwise comparisons. The k ex values obtained from endogenous CEST measurements did not correlate with the pHe results from exogenous CEST measurements. The k ex measurements were limited to fewer pixels and had a limited dynamic range relative to pHe measurements. Measurements of k ex with endogenous CEST MRI cannot substitute for pHe measurements with acidoCEST MRI. Whereas endogenous CEST MRI may still have good utility for evaluating some specific pathologies, exogenous acido-CEST MRI is more appropriate when evaluating pathologies based on pHe values. Magn Reson Med 79:2766-2772, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

  10. Study of the temperature influence during the uranium (Vi) sorption on surface of ZrP{sub 2}O{sub 7} in presence of oxalic and salicylic acid; Estudio de la influencia de la temperatura durante la sorcion de uranio (VI) en la superficie del ZrP{sub 2}O{sub 7} en presencia de acidos oxalico y salicilico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N.

    2013-07-01

    This work studies the effect of temperature on the uranium (Vi) sorption onto zirconium diphosphate in the presence of organic acids (oxalic and salicylic acids). Zirconium diphosphate was synthesized by a chemical condensation reaction and characterized using several analytical techniques, in order to check its purity. This point is very important because the presence of any impurities or secondary phases may interfere with the hydration and sorption process. Prior to the sorption experiments, three batches of zirconium diphosphate were pre-equilibrated with NaClO{sub 4}, oxalic acid or salicylic acid solutions. The hydrated solids were washed and dried and then again characterized in order to study the interactions between organic acids and zirconium diphosphate surface. Uranium sorption onto zirconium diphosphate (pre-equilibrated with NaClO{sub 4}, oxalic acid and salicylic acid solutions) was investigated as a function of ph, organic acid and temperature (20, 40 y 60 grades C). Thermodynamic parameters for the sorption reactions (enthalpy change, entropy change and Gibbs free energy change) were determined from temperature dependence of distribution coefficient by using the Vant Hoff equation. Solids characterization after hydration shows that exist an interaction between organic acids and ZrP{sub 2}O{sub 7}. This fact was confirmed with the microcalorimetry study, the reaction heat for hydration of zirconium diphosphate in NaClO{sub 4} solution was exothermic (-269.59 mJ) and for hydration of zirconium diphosphate in oxalic acid solution was endothermic (53.64 mJ). The experimental results showed important differences in the sorption mechanisms for the reaction of Uranium with ZrP{sub 2}O{sub 7} in the presence and absence of organic acids. For the zirconium diphosphate hydrated with oxalic acid, the sorption percentage was 50% from lowest ph values. For the zirconium diphosphate hydrated with salicylic acid, the initial concentration of uranium was 6 x 10{sup -4} M and a percentage of 10% was observed in the initial reaction and it reached 100% at ph 5.5. A similar behavior was observed for the zirconium diphosphate hydrated with NaClO{sub 4}, but the initial concentration of uranium was 5 x 10{sup -4} M. The temperature had an important effect on the sorption of uranium onto ZrP{sub 2}O{sub 7}. The reaction of uranium with the solid hydrated with NaClO{sub 4} was exothermic from 20 to 60 grades C, and the reaction with the solid hydrated with organic acids was exothermic from 20 to 40 grades C and endothermic from 40 to 60 grades C. In conclusion, the thermodynamic study indicated that the sorption process was activated chemisorption s. (Author)

  11. Influence of method of preparation of Pt Ru/C electrocatalysts on the catalytic activity for the ethanol oxidation reaction in acidic medium; Influencia do metodo de preparacao de eletrocatalisadores PtRu/C sobre a atividade catalitica frente a reacao de oxidacao de etanol em meio acido

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Walber dos Santos; Silva, Uriel Lean Valente; Souza, Jose Pio Iudice de, E-mail: jpio@ufpa.br [Universidade Federal do Para, (UFPA), Belem, PA (Brazil). Instituto de Ciencias Exatas e Naturais. Faculdade de Quimica

    2013-09-01

    In this work the influence of variations in the borohydrate reduction method on the properties of Pt Ru/C electrocatalysts was investigated. The electrocatalysts were prepared using 1:1 ; 2:1; 5:1; 50:1 and 250:1 molar ratios of NaBH{sub 4} to metals. The reduction was also performed by dripping or by fast addition of the solution. The results showed that Pt Ru nanoparticles obtained by fast addition had the smallest crystallite sizes. It was also noted that the catalytic activity increased as the borohydrate:metal molar ratio increased. The Pt Ru/C electrocatalysts (50:1) obtained by fast addition presented the best catalytic activity for ethanol electro-oxidation. (author)

  12. Assessment of micro, macro, toxic elements (Cd, Hg, Pb) and fatty acids profile in consumed fish commercially available in Cananeia and Cubatao, Sao Paulo State; Avaliacao de micro e macroelementos, elementos toxicos (Cd, Hg e Pb) e acidos graxos, em peixes disponiveis comercialmente para consumo em Cananeia e Cubatao, Estado de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Curcho, Michel Rodrigues da Silva Morales

    2009-07-01

    Aside from their nutritional importance, fish are considered one of the most important bio indicators in aquatic systems for the estimation of pollution levels by toxic metals. This is so, since fish can bio accumulate these elements and they occupy different trophic levels and present different sizes and age. The purpose of the present study was to contribute with important data for the knowledge of nutritional and toxic constituents in muscles of the most consumed fish species from two coastal regions, Cananeia and Cubatao. Cananeia fish species analyzed were: Micropogonias furnieri (Corvina), Macrodon ancylodon (Pescada), Centropomus undecimalis (Robalo peba) and Mugil platanus (Tainha). From Cubatao, Micropogonias furnieri (Corvina), Macrodon ancylodon (Pescada), Menticirrhus americanus (Perna de moca), Sardella braziliensis (Sardinha) and Mugil liza (Tainha). For this study, analytical methodologies were developed and validated, regarding precision and accuracy, by means of certified reference materials. Micronutrients (Ca, Fe, K, Na, Se and Zn) and some trace elements (As, Br, Co, Cr, Rb) in fish muscle were determined by means of neutron activation analysis (NAA). Cold Vapor Atomic Absorption Spectrometry (CV AAS) was used for total Hg determination and Electrothermal Atomic Absorption Spectrometry (ET AAS) for Cd and Pb determinations. Proximate composition determinations according to AOAC methodologies and fatty acids profiles by gas chromatography were done in these muscle fish samples. Regarding fatty acids profile from the {omega}-6 family, Tainha species pool presented the highest values (8.9%) and Pescada species pool the lowest ones (4.4%) for Cananeia species. Fatty acids from the {omega}-3 family, Sardinha pool species presented the highest values (31.8%) for all species analyzed. Regarding micronutrients content great concentration variations between individual of the same species and between different species were observed. Discriminate analysis was used for the values for micronutrient content for all fish species analyzed in order to identify samples of similar chemical composition and respective food habits. Concerning populational risk to toxic elements exposure, in this case As and Hg, it was possible to conclude that Corvina and Pescada from Cananeia and Corvina, Sardinha and Tainha from Cubatao presented the highest values for As exceeding the Brazilian legislation limits for this contaminant. For Hg, all the species analyzed did not exceed the Brazilian legislation limits for predatory and non predatory species. Results from this study also suggest that Corvina species can be used as a bioindicator since this species bioaccumulate metals and remains in the estuary until it reaches adulthood. Thus, Corvina can be considered as a good indicator of the conditions of the coastal region where it inhabits. (author)

  13. Evolution evidence of a basic fluid to an acid based in the analysis of hydrothermal alteration of the geothermic field of the Azufres, Michoacan; Evidencias de evolucion de un fluido basico a acido a partir del analisis de la alteracion hidrotermal del campo geotermico de los Azufres, Michoacan

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Partida, Eduardo [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2000-07-01

    Hydrothermal alteration at the Los Azufres geothermal field is mostly composed of calc-silicate minerals that define a propylitic alteration zone, which shows progressive dehydration with depth and temperature increase. A generalized zoning of the calc-silicate zone can be observed, with zeolites in the upper part and epidote-clinozoisite at the deepest levels. An argillic alteration zone overlies the calc-silicate zone and is the dominant surface manifestation of the hydrothermal alteration. In some parts, there is a mineral assemblage composed of kaolinite-alunite-native sulfur-quartz (advanced argillic zone) formed by the interaction of vapor and shallow groundwater. The proto-fluid at the Los Azufres geothermal system is related to a neutral sodium chlorine brine, which favors deep propyllitic alteration (productive zone). This zone is characterized by secondary permeability due to fracturing. At depth the geothermal field is dominated by a pressurized liquid, yielding to vapor at more shallow zone. The gradual change from a liquid to a vapor phase occurs through boiling at depths between 1,200 and 1,500 m, and is accompanied by changes in the hydrothermal alteration mineralogy. The type of alteration passes from proylitic to argillic by means of an oxidation-acidification process, which includes the participation of a gas, particularly CO{sub 2}. Considering the physicochemical characteristic of the brine and the evolution of the paragenetic sequence, the Los Azufres geothermal field could de considered a model for hydrothermal behavior at ore deposits which develop by boiling and oxidation of low sulfidation fossil hydrothermal fluids. [Spanish] En el campo geotermico de Los Azufres la zona de alteracion hidrotermal esta formada en su mayor parte por calcosilicatos (que definen una zona paragenetica del tipo propilitico), los cuales muestran una deshidratacion progresiva conforme se va profundizando e incrementandose la temperatura. Se puede generalizar un zoneamiento evolutivo para los calcosilicatos predominando las zeolitas hacia la cima y la epidota-clinozoicita en los niveles mas profundos. Le sobreyace una zona de argilitizacion que domina las manifestaciones hidrotermales superficiales. En algunas zonas, se tiene la asociacion caolinita-alunita-azufre nativo-cuarzo (zona argilica avanzada) formada por la interaccion vapor-acuifero someros. En el sistema geotermico de Los Azufres el protofluido esta ligado a una salmuera clorurado-sodica de caracter neutro que propicia una alteracion hidrotermal propilitica profunda (zona productoras) y se caracteriza por tener una permeabilidad secundaria debido al fracturamiento. A profundiad el yacimiento es a liquido dominante presurizado para evolucionar a vapor en su parte mas somera. El cambio gradual de la fase liquida a vapor se da por ebullicion a profundidades del orden de 1,200 a 1,500 m, y esta acompanado por cambios igualmente presentes en la mineralogia de alteracion hidrotermal. Ella pasa de propilitica a argilica por un proceso de oxidacion-acidificacion, en donde la participacion de gases, principalmente de CO{sub 2}, es importante. De acuerdo a las caracteristicas fisicoquimicas de la salmuera y la evolucion en las fases parageneticas, el yacimiento de Los Azufres pudiera ser un modelo de comportamiento hidrotermal en el deposito de las menas que se dan por ebullicion y oxidacion de los fluidos hidrotermales fosiles de baja sulfidacion.

  14. Determination of uranium and {sup 2}10Po in the river Odiel to assess the radioactive impact of acid mine drainage; Determinacion de uranio y {sup 2}10Po en el rio Odiel para valorar el impacto radiactivo de los drenajes acidos mineros

    Energy Technology Data Exchange (ETDEWEB)

    Manjon, G.; Lehritani, M.; Mantero, J.; Diaz Frances, I.; Garcia-Tenorio, R.

    2013-07-01

    Since 1986 this research group has been monitoring of radioactive environmental impact in the estuary of the river Odiel, generated by the factories of production of phosphoric acid from Huelva, that emitting NORM waste. Once closed factories, is observed a second source of contamination: mining drains. To verify this source have been studied concentration levels of natural radionuclides in the waters and sediments of the river Odiel, in areas that are incorporated drains. (Author)

  15. Effect of addition of lignin in physical-chemical properties of a polyesters based on glycerol, phthalic and adipic acids; Efeito da adicao de lignina nas propriedades fisico-quimicas de poliesteres a base de glicerol e acidos ftalico e adipico

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, D.H.; Viana, A.P.M.; Lima, A.S.C.; Goncalves, A.P.B.; Miranda, C.S.; Jose, N.M., E-mail: dhanseng@yahoo.com.br [Universidade Federal da Bahia (UFBA), alvador, BA (Brazil)

    2014-07-01

    In this paper the study of different addition amounts of lignin in the physicochemical properties of polyesters made from glycerol and different amounts of phthalic and adipic acids have been proposed. The following characterizations were made: XRD, FTIR, TGA, DSC and SEM. The variation in the percentage of adipic and phthalic acids had a direct effect on thermal and morphological properties. The thermal analysis showed that there was miscibility between the polyester and lignin, by means of displacement related to the temperature of thermal degradation events. In FTIR analysis was noted displacements of characteristic bands of hydrogen bonds and specific carbonyl ester groups. These shifts were more pronounced as it has larger amounts of phthalic acid as monomer and larger amounts of lignin in the compositions. (author)

  16. Characterization of ZrP{sub 2}O{sub 7} modified with oxalic acid and thermodynamic analysis associated to the uranyl (Vi) sorption; Caracterizacion de ZrP{sub 2}O{sub 7} modificado con acido oxalico y analisis termodinamico asociado a la sorcion de uranilo (VI)

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N.; Ordonez R, E. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Solis C, D. A. [Universidad Autonoma del Estado de Mexico, Facultad de Quimica, Paseo Colon y Paseo Tollocan, 50120 Toluca, Estado de Mexico (Mexico); Simoni, E.; Drot, R.; Jeanson, A., E-mail: eduardo.ordonez@inin.gob.mx [Universite Paris-Sud, Institut de Physique Nucleaire, Georges Clemenceau No. 15, Orsay (France)

    2013-10-15

    Several physical and chemical tests were carried out to evaluate the influence of the oxalic acid in the uranium (Vi) sorption on the surface of the zirconium diphosphate. The physical analyses consist of atomic force microscopy (AFM) and total organic coal, and the chemists are the calculation of the reaction heat for the hydrate and sorption processes, the reaction speed constant and the sorption yield in the sodium perchlorate systems and of oxalic acid; these tests allow to corroborate that the oxalic acid influences positively in the uranium (Vi) sorption forming a ternary system of ZrP{sub 2}O{sub 7}/(C{sub 2}O{sub 4})/U(Vi), with a single configuration along the ph interval studied. (Author)

  17. Polarographic study of the Cu(II)/Cu(I) system in the presence of 1-ascorbic acid and 0,1 M ClK; Estudio polarografico del sistema Cu(II)/Cu(I) en presencia del acido 1-ascorbico y en ClK 0,1 M

    Energy Technology Data Exchange (ETDEWEB)

    Alonso Lopez, J

    1969-07-01

    While studying the catalytic effect of Cu{sup {down_arrow}}2 ions on the oxidation process of 1-ascorbic acid, it has been observed that, in a 0,1 M solution of K1 at a pH 6 to 7, the above acid gives rise in the presence of Cu{sup {down_arrow}}2 ions to a polarographic wave of half-wave potential of -0,41 V (vs. S.C.E.). (Author) 14 refs.

  18. Chemical recycling of post-consumer PET: structural characterization of terephthalic acid and the effect of Alkaline Hydrolysis at low temperature; Reciclagem quimica do PET pos-consumo: caracterizacao estrutural do acido tereftalico e efeito da hidrolise alcalina em baixa temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, Talitha Granja; Almeida, Yeda Medeiros Bastos de; Vinhas, Gloria Maria, E-mail: gmvinhas@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Engenharia Quimica

    2014-09-15

    Due to the environmental impact caused by PET packaging disposal, this material recycling has been thoroughly discussed and evaluated. In particular, chemical recycling enables achievement of the monomers that are used in PET resin manufacture: ethylene glycol (EG) and terephthalic acid (PTA). Therefore, studies for this process optimization are important from environmental and economic points of view. The present study investigated certain parameters that influence the depolymerization reaction of PET post-consumer via alkaline hydrolysis in order to obtain PTA. Assays were performed at 70 °C by varying the concentration of sodium hydroxide and the reaction time. The best results were obtained at 10.82 mol L{sup -1} NaOH and 9 h reaction time. Consequently, it was possible to prove this process viability, once analyses by infrared and nuclear magnetic resonance confirmed that PTA was obtained in all reactions performed. (author)

  19. Oxidizing gel formulation for nuclear decontamination: rheological and acidic properties of the organic matrix and its ozonolysis; Formulation d'un gel oxydant a matrice organique applicable a la decontamination nucleaire: proprietes rheologiques, acido-basiques et ozonolyse de la matrice

    Energy Technology Data Exchange (ETDEWEB)

    Rouy, E

    2003-10-15

    An acidic and oxidizing gel was formulated with a purely organic matrix, xanthan gum, at low concentrations (1 to 2 wt %). This polymer gel was investigated in various media (aqueous, acidic and ceric) by means of rheology: shear thinning behaviour, thixotropy, yield stress... Evidences of unexpected rheological properties in highly concentrated media show that xanthan is quite convenient for industrial projection of this type of gel on metallic walls in nuclear plants, notwithstanding its time-limited resistance to oxidation (about a few hours). Complexation mechanisms between ceric species and polar sites of the polymer led us to characterise acidic properties of our xanthan sample by potentiometric titration and {sup 1}H NMR techniques. The matrix was finally treated by ozonolysis to suppress organic residues, as required to handle nuclear wastes. In acidic medium, ozonolysis of the gel was achieved successfully while in acidic and ceric medium this process showed limited efficiency, needing further investigation to be clarified. (author)

  20. Determination of glyphosate residuals and of their metabolite Aminomethyl-Phosphonic acid in waters, by means of liquid chromatography of high efficiency with post-column derivation and fluorescence detection; Determinacion de residuos de glifosato y de su metabolito acido aminometilfosfonico en aguas, mediante cromatografia liquida de alta eficiencia con derivacion poscolumna y deteccion por fluorescencia

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Hugo A; Guerrero, Jairo; Castro, Rene

    2002-07-01

    The glyphosate is a no selective herbicide largely used in the world in order to control annual and perennial weeds. Its principal metabolite in soils and waters is the Aminomethyl-Phosphonic Acid (AMPA) formed by micro organism's action. This herbicide is used in Colombia in high doses to illegal crops eradication of coca and Amapola and like natural accelerator in sugar cane, constituting an environmental and social problem for the country, being necessary the evaluation of glyphosate residues in different matrices. This study describes the validation of the analytical methodology for the simultaneous determination of glyphosate and its metabolite AMPA in waters of some Colombian regions. The experimental procedure pointed out two main steps: the first one was a cleaning, extraction and concentration step by solid phase extraction; the second step is the separation, identification and quantification of the compounds by High Performance Liquid Chromatography (HPLC) with post-column derivation and fluorescence detection. The results of the validation show that the methodology is specific, selective, precise and robust with linear calibration curve in the linear range between 10 and 750 {mu}g/L, with limits of detection of 0.8 {mu}g/L and limits of quantification of 2 {mu}g/L for the two analyses. The recoveries are in the order of 73% for glyphosate and 70% for AMPA. More over analysis results are presented for water samples of some country regions where glyphosate is applied in different doses with different purposes, finding residues of the herbicide and its metabolite in concentrations above the allowed values in drinking waters for pesticides of toxicology category IV, like the glyphosate, according with the Colombian legislation.

  1. Synthesis of zeolites coal ash in surfactant modified in application and removal of orange 8 acid solution: study in batch, fixed bed column and evaluation ecotoxicological; Sintese de zeolitas de cinzas de carvao modificada por surfactante e aplicacao na remocao de acido laranja 8 de solucao aquosa: estudo em leito movel, coluna de leito fixo e avaliacao ecotoxicologica

    Energy Technology Data Exchange (ETDEWEB)

    Magdalena, Carina Pitwak

    2015-09-01

    In this study, synthesized zeolitic material from coal ash and modified cationic surfactant was used for removing the acid dye Orange 8 (AL8) by adsorption process using moving bed and fixed-bed column. The raw material and adsorbents were characterized by different techniques, such as X-ray diffraction, X-ray fluorescence spectroscopy, among others. The adsorption of AL8 was performed by moving bed in order to optimize the results when they are launched in a fixed bed. The effects of adsorption on zeolite AL8 were compared: (1) Effect of counterions Br{sup -} and Cl{sup -} surfactant used in the modification of the zeolite; (2) effect of type of coal ash used as raw material in the synthesis of zeolites (fly and bottom). The following adsorbents were used in the study: fly and bottom zeolite modified by surfactant hexadecyltrimethylammonium bromide (ZLMS-Br-Br and ZPMS-Br) and fly zeolite modified by surfactant hexadecyltrimethylammonium chloride (ZLMS-Cl). The pseudo-second-order kinetic described the adsorption of the dye on all adsorbents. The equilibrium time was reached 40, 60 and 120 min for ZLMS-Br, ZLMS-Cl and ZPMS-Br, respectively. The adsorption equilibrium was analyzed by the equations of the models of linear and nonlinear isotherms of Langmuir, Freundlich, Temkin and Dubinin- Radushkevivh (DR) and the criterion of best fit was evaluated using the error functions.The DR model was adjusted better to the experimental data for the system AL8 / ZLMS-Br, the Freundlich model for AL8 / ZLMS-Cl and Langmuir for AL8 / ZPMS. According to the Langmuir maximum adsorption capacity was 4.67, 1.48 and 1.38 mg g{sup -1} for ZLMS-Br, ZLMS-Cl and ZPMS-Br, in order. In studies employing fixed bed columns, the effects of inlet concentration (20- 30 mg L{sup -1}), flow rate (4.0 -5.3 mL min{sup -1}) and the bed height (5, 5 - 6.5 cm) above the breakthrough curves characteristics in the adsorption system were determined. The Adams-Bohart, Thomas, Yoon-Nelson models were applied to experimental data to predict the breakthrough curves and to determine the parameters that characterize the column. The mathematical models of Thomas and Yoon-Nelson adjusted well to the data of breakthrough curves. The highest bed capacity of 5.3 mg g{sup -1} was obtained using 30 mg L{sup -1} inlet Acid Orange 8 concentration, 5.5 cm bed height and 5.3 mL min{sup -1} flow rate. Acute ecotoxicity tests using Daphnia similis microcrustacean with wastewater (AL8) and after treatment with surfactant modified zeolite were carried out with the purpose of evaluating evidence of possible contamination when launched on the receiving water body. The results of this study showed that samples AL8 dye in aqueous solution does not show any toxic effect, and the treated samples showed toxicity with ZLMS-Br. (author)

  2. Comparison of the efficacy of carbamazepine, haloperidol and valproic acid in the treatment of children with Sydenham´s chorea: clinical follow-up of 18 patients Comparación de la eficacia de carbamazepina, haloperidol y acido valproico en el tratamiento de niños con corea de Sydenham: seguimiento clínico de 18 pacientes

    Directory of Open Access Journals (Sweden)

    Joaquín Peña

    2002-06-01

    Full Text Available In order to compare and contrast the efficacy of haloperidol, carbamazepine, and valproic acid in the treatment of Sydenham´s chorea a prospective study including 18 cases of this disorder was undertaken. Age of patients ranged from 7 to 15 years. Ten children were female and 8 were male. All but one had generalized, either symmetric or asymmetric chorea. The patients were divided in three equal groups, and were given a standardized dose of each of the drugs built-up over a week. Following therapy, the six children receiving valproic acid showed remarkable improvement, without side effects. Five patients receiving carbamazepine showed improvement without side effects. Only three of the patients that received haloperidol improved. In the 4 cases that did not show clinical improvement after one week of treatment, therapy with valproic acid led to disappearance of the symptoms in a lapse that ranged from 4 to 7 days. Recurrence related to discontinuation of treatment was observed in two patients. In view of the present results we recommend valproic acid as the first choice drug to treat Sydenham chorea.A fin de comparar y contrastar la eficacia de haloperidol, carbamazepina y ácido valproico en el tratamiento de la corea de Sydenham, se realizó un estudio prospectivo que incluyó 18 casos de esta patología. La edad de los pacientes varió de 7 a 15 años. Diez de los niños eran varones y el resto hembras. A excepción de uno de ellos, todos tenían corea generalizada, simétrica ó asimétrica. Los pacientes fueron divididos en tres grupos iguales, a cada uno de los cuales se le administró una dosis estandarizada de los medicamentos mencionados durante una semana. Luego del tratamiento, los seis pacientes que recibieron ácido valproico mostraron mejoría notable sin efectos colaterales. Cinco de los seis pacientes que recibieron carbamazepina exhibieron mejoría sin efectos colaterales. Solo tres de los pacientes que recibieron haloperidol mejoraron. En los cuatro casos que luego de recibir estas dos últimas drogas sin experimentar mejoría clínica luego de una semana, se instaló terapia con ácido valproico, lo que llevó a desaparición de la sintomatología en un lapso de 4 a 7 días. Se observó recaída relacionada con tratamiento discontinuado en dos de los pacientes. A la vista de nuestros resultados, recomendamos el ácido valproico como droga de primera elección en el tratamiento de la corea de Sydenham.

  3. Study of conformational and acid-base properties of norbadione A and pulvinic derivatives: Consequences on their complexation properties of alkaline and alkaline earth cations; Etude des proprietes conformationnelles et acido-basiques de la norbadione A et de derives pulviniques: consequences sur leurs proprietes complexantes de cations alcalins et alcalino-terreux

    Energy Technology Data Exchange (ETDEWEB)

    Kuad, P

    2006-01-15

    This work deals with the study of norbadione A, a pigment extracted from mushrooms and known to complex cesium cations. The study of the acid-base properties of norbadione A has allowed to determine the relative acidity of the seven protonable functions of the molecule and to reveal a reversible isomerization of the double exocyclic bond of the pulvinic moieties. The observed change of configuration is induced by a hydrogen bond of the H-O-H type and by electrostatic interactions. Moreover, the microscopic protonation mechanism of the norbadione A has been analyzed, considering three different study media where the acid-base properties of the norbadione A are compared. In the presence of 0.15 mol.l{sup -1} of NaCl, it has been observed a remarkable cooperativity in the protonation of the enol groups. At last, the use of different analytical methods (NMR, potentiometry and calorimetry) has allowed to study the complexing properties of the norbadione A towards cesium and other alkaline and rare earth cations. (O.M.)

  4. Evaluation and characterization of ceramic membranes based on Pdms/SiC containing phosphotungstic acid as electrolytes for PEM-FC; Avaliacao e caracterizacao de membranas ceramicas condutoras a base de PDMS/SiC contendo acido fosfotungstico como eletrolito para PEM-FC

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Marcelo de Oliveira; Guimaraes, Danilo Hansen; Boaventura Filho, Jaime Soares; Jose, Nadia Mamede [Universidade Federal da Bahia (IQ/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais; Barbosa, Diego Augusto Batista; Paschoal, Carlos William de Araujo [Universidade Federal do Maranhao (DF/UFMA), Sao Luis, MA (Brazil). Dept. de Fisica; Almeida, Rafael Mendonca; Tanaka, Auro Atsushi [Universidade Federal do Maranhao (DQ/UFMA), Sao Luis, MA (Brazil). Dept. de Quimica

    2009-07-01

    This work presents the development of membranes with potential use in Proton Exchange Fuel Cells (PEM-FC), consisting of hybrid materials based on poly(dimethylsiloxane), crosslinked with tetraethyl orthosilicate (TEOS), and reinforced with silicon carbide and phosphotungstic acid. The membrane series PDMS/TEOS/SiC/PWA were prepared by the reaction of PDMS and TEOS, 70/30% proportions in mass, catalyzed by dibutyltin dilaurate. SiC was incorporated in a 25% proportion, and PWA in varied proportions (5, 10, 15 and 20%), by weight. The membranes were characterized by Thermo-Gravimetric Analysis (TGA), X-ray Diffraction, Scanning Electron Microscopy and impedance spectroscopy. SiC and PWA addition to the membrane increased both structure organization and material crystallinity. The insertion of PWA provided an increase in the conductivity. However, maximum conductivity was obtained with concentration levels above 10%. The insertion of SiC associated with the PWA did not influence the conductivity for concentrations between 10 and 20%. (author)

  5. Determination of the longitudinal relaxation time (T{sub 1}) of the carbon for the caura-16-E N-19-oic acid; Determinacao do tempo de relaxacao longitudinal (T{sub 1}) do carbono para derivados do acido-caura-16-en-19-oico

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro, J A; Rodrigues, A S [Ceara Univ., Fortaleza, CE (Brazil). Dept. de Quimica Organica e Inorganica

    1992-12-31

    In this work, we analyse, through the {sup 13} C longitudinal relaxation time (T{sub 1}), the solute-solute and solute-solvent interactions in some molecules of the c aura-16-en-19-oic acid such as: c aura-16-en-19-oic acid (I), c aura-15-acetoxy-16-en-19-oic acid (II), methyl esther of the c aura-16-en-19-oic acid (III) and c aura-16-en-19-ol (IV) 5 refs., 1 fig., 1 tab.

  6. LACTIC ACID BACTERIA WITH ANTIMICROBIAL ACTIVITY AGAINST PATHOGENIC AGENT CAUSING OF BOVINE MASTITIS BACTERIAS ACIDO LACTICAS CON ACTIVIDAD ANTIMICROBIANA CONTRA PATÓGENOS CAUSANTES DE MASTITIS BOVINA OUT BACTÉRIAS LÁTICAS COM ATIVIDADE ANTIMICROBIANA CONTRA OUT PATÓGENOS DA MASTITE BOVINA

    OpenAIRE

    LILIANA SERNA C; LEIDY JOHANA VALENCIA H; RÓMULO CAMPOS G

    2011-01-01

    The use of antibiotics to treat bovine mastitis, produces antibiotic residues in milk and decreased quality of dairy products. Lactic acid bacteria have been proposed as an alternative to avoid the use of antibiotics. This paper reports the antimicrobial activity against pathogens responsible of bovine mastitis, of 4 lactic acid strains isolated from cattle in a state of acidosis ruminal. It also evaluated the specific growth rate (m) and antimicrobial activity of one of the strains, using tw...

  7. Determination of the extractive capacity of para-tert butyl calix[8]arene octa-phosphinoylated towards uranyl ions from an aqueous-acidic-salty medium; Determinacion de la capacidad extractiva del p-ter-butilocalix[8]areno octa-fosfinoilado hacia iones uranilo de un medio acuo-acido salino

    Energy Technology Data Exchange (ETDEWEB)

    Serrano V, E. C.

    2011-07-01

    The extraction properties of octa-phosphinoylated para-tert butyl calix[8]arene (prepared in the laboratory) in chloroform towards uranyl ions from an aqueous-acidic-salty medium (HNO{sub 3}-3.5 NaNO{sub 3}) containing uranyl nitrate salt, was investigated. Two spectroscopic techniques UV/Vis and Luminescence were used for this study. The latter permitted analyze the fluorescence from the uranyl ions influenced by the surrounding medium. Both permitted to learn about the power of this calixarene as extractant towards the mentioned ions. Its extraction ability or capability using this calixarene at 5.91 x 10{sup -4} M towards the uranyl ions was 400% as determined by UV/Vis while fluorescence revealed 100% of uranyl ion extraction. A closed analysis of the results obtained by using these techniques revealed that the stoichiometry of the main extracted species was 1calixarene:2 uranyl ions. The loading capacity of the calixarene ligand towards the uranyl ions was also investigated using both techniques. UV/Vis resulted to be inadequate for quantifying exactly the loading capacity of the calixarene whereas luminescence was excellent indeed, using a 5.91 x 10{sup -4} M calixarene concentration, its loading capacity was 0.157 M of free uranyl ions from 0.161 M of uranyl ions present in the aqueous-acidic-salty medium. The extracts from the ability and capacity studies were concentrated to dryness, purified and the dried extracts were analyzed by infrared and neutron activation analysis. By these techniques it was demonstrated that during the extraction of the uranyl ions by the calixarene ligand they form thermodynamically and kinetically stable complexes, since in the solid state, the 1:2, calixarene; uranyl ions stoichiometry was kept with the minimum formula: (UO{sub 2}){sub 2}B{sub 8}bL{sup 8}(NO{sub 3}){sub 4}(H{sub 2}O){sub 4}CHCl{sub 3}(CH{sub 3}OH){sub 3} the methanol molecules come from its purification. It is proposed that B{sub 8}bL{sup 8} calixarene in chloroform medium is a good extractant for the treatment of nuclear wastes or radioactive wastes containing uranium in a rich aqueous-acidic-salty medium. (Author)

  8. Synthesis of aluminum oxide by the polymer precursor method (Pechini) in 4: 1 ratio of citric acid: metal cation: calcination temperature effect; Sintese do oxido de aluminio pelo metodo dos precursores polimericos (Pechini) na relacao 4:1 de acido citrico: cation metalico: efeito da temperatura de calcinacao

    Energy Technology Data Exchange (ETDEWEB)

    Silva, M.C.; Lira, H.L.; Ribeiro, P.C.; Freitas, N.L., E-mail: mirelecsilva@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais

    2014-07-01

    The technology field is nanopowders prominent in science since these materials fall in various sectors regarding their applications. This work aims at the synthesis of aluminum oxide by polymeric precursors in 4:1 ratio of citric acid:metal cation and evaluate the influence of calcination temperature on their structural and morphological characteristics. The samples after reaction were characterized by XRD and thermal analysis. After calcination 500-1200°C the samples were characterized by XRD, SEM and particle size distribution. The results showed that the variation of the calcination temperature is sufficient to achieve a same material with different structural and morphological characteristics. The most stable phase aluminum oxide arose only after calcination at 1100°C, below 900°C, the amorphous material appeared. As regards the morphology, the change was not as significant as compared to the structure. (author)

  9. Study of the influence of the citric and oxalic acid in the uranyl sorption in ZrP{sub 2}O{sub 7} for their use in contention barriers; Estudio de la influencia del acido citrico y oxalico en la sorcion de uranilo en ZrP{sub 2}O{sub 7}, para su uso en barreras de contencion

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N.

    2009-07-01

    Countries which produce electricity by nuclear means, such as Mexico, need to develop a technology for that at long term safe containment of nuclear waste that are produced in nuclear power plants, for now, the arrangement of these is made by international companies, as which is extremely expensive. The most accepted proposal for the containment of radioactive waste is the Deep Geological Repository (DGR), which consists of a number of natural barriers and of engineering barriers. Currently, barriers to engineering and materials that the make up are still under study, because must meet a series of structural criteria and chemical such as high insolubility, thermal and chemical stability with ionizing radiation. The surface must have adsorbed features of ions and organic compounds dissolved in infiltration water that could penetrate for a crack in the DGR. This study focuses, as first stage, is the uranyl sorption on zirconium diphosphate in various conditions of time, concentration and ph, then evaluates the influence of citric acid and oxalic acid on the sorption of uranyl on ZrP{sub 2}O{sub 7}, in order to model the behaviour of alpha emitters that are dissolved by percolating water laden with salts and organic matter, that infiltrates might during catastrophic events in the DGR. It was confirmed the purity of the zirconium diphosphate because it was synthesized from sea sand with the physicochemical characterization and superficial. The proposed methodology included elemental analysis by neutron activation and X-ray emission induced by charged particles, functional group analysis with infrared spectroscopy, morphology with scanning electron microscopy, crystallinity with transmission electron microscopy and X-ray diffraction. For properties surface was determined, the specific area using Bet multipoint technique, acidity constants in the FITEQL 4.0 program, the hydration time was obtained from literature, the point of zero charge was identified with a mass titration and zeta potential, the density of surface sites was determined with acid-base titrations. We evaluated the adsorption of uranyl and adsorption of uranyl complex / organic acid (citric and oxalic) in ZrP{sub 2}O{sub 7} with chemical kinetics using batch technique under different conditions. Quantification and speciation of uranyl, was made by the luminescence technique in their modalities of fluorescence and phosphorescence. It was confirmed that modifying the surface of ZrP{sub 2}O{sub 7} with oxalic acid and citric, different species that were generated on the surface of this, compared with the hydration of sodium perchlorate. (Author)

  10. Characterization and corrosion behavior of phytic acid coatings, obtained by chemical conversion on magnesium substrates in physiological solution; Caracterizacion y comportamiento frente a la corrosion de recubrimientos de acido fitico, obtenidos por conversion quimica, sobre substratos de magnesio en solucion fisiologica

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Alvarado, L. A.; Lomeli, M. A.; Hernandez, L. S.; Miranda, J. M.; Narvaez, L.; Diaz, I.; Garcia-Alonso, M. C.; Escudero, M. L.

    2014-10-01

    In order to improve the corrosion resistance of biodegradable magnesium and AZ31 magnesium alloy implants, a phytic acid coating has been applied on both substrates and their protective effect against corrosion has been assessed. The morphology and the chemical nature of the conversion coating were analyzed by SEM/EDX, XRD and FTIR. The spectra showed that the conversion coating was amorphous, and it was composed of Mg, O, and P on magnesium surface, along with Al, Zn and C on AZ31 alloy. The main coating components were chelate compounds formed by phytic acid and metallic ions. The corrosion resistance of bare and coated samples was evaluated by potentiodynamic polarization technique in Hank's solution at 37 degree centigrade. The results indicate that phytic acid conversion coatings provided a very effective protection to the magnesium substrates studied. (Author)

  11. Preparation of manganese salts of carboxylic acids labelled with ''54Mn and comparison with ''54 MnCl{sub 2} in liquid scintillation counting; Preparacion de sales manganosas de acidos alifaticos monocarboxilicos marcados con ''54 MnCl{sub 2} en medidas por centelleo liquido

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Barquero, L.; Arcos Merino, J. M. los; Grau Malonda, A.

    1992-07-01

    Procedures for liquid scintillation sample preparation of manganese dimethylbutirate, decanoate and palmitate, labelled with 54 Mn are described. their quenching effect, spectral evolution and counting stability along several weeks are analysed in liquid scintillation measurements with Toluene. HISafe II. PCS, instagel. Dioxane-naphtalene and Toluene-alcohol. For comparison, Inorganic 54 MnCl-2 samples are also studied, resulting in acceptable counting stability but showing greater quenching and signs of little spectral degradation against the organic samples. (Author)

  12. Determinacion de la configuracion E-Z de los acidos Fumarico y Maleico. Un experimento orientado a incentivar el desarrollo de la investigacion cientifica en alumnos de Pregrado Determination of the E-Z fumaric and maleic acids configuration. An experiment designed to develop scientific research abilities in undergraduates students

    Directory of Open Access Journals (Sweden)

    Carlos Bustos

    2000-08-01

    Full Text Available In this work we intend to eliminate the idea that laboratory exercises seem like cookbooks. That is, exercises shall be presented as a problematic situation. Based on observation and experimentation, the students should determine the E-Z configuration of maleic and fumaric acids. The basis of this laboratory exercise is the acid-catalyzed isomerization of maleic acid to fumaric acid. Students are given the starting material, reagents and the experimental procedure. They are told that the starting material is a dicarboxylic acid containing a C=C double bond of formula C4H4O4. Students determine melting points, solubilities, acidity and chromatographic patterns for both the starting material and the product, so that a configuration of each acid can be proposed. This type of experiment yields excellent results, because the students are left to deduce that maleic acid is less stable than fumaric acid. Additionally, they conclude that maleic acid is the "Z" isomer and fumaric acid is the "E" isomer. Finally, this laboratory exercise allows the students to develop simultaneously their critical-thinking skills with the respective laboratory techniques and not to see chemistry as recipes to be followed.

  13. Sterilization by Gamma-Radiation of the Sodium Salt of p-Amino-Salicylic Acid; Sterilisation par irradiation gamma du sel sodique de l' acide p-amino salicylique; Sterilizatsiya gamma-oblucheniem natrievoj soli paraaminosalitsilovoj kisloty; Esterilizacion porirradiacion gamma dela sal sodica del acido p-aminosalicilico

    Energy Technology Data Exchange (ETDEWEB)

    Bellion, B.; Denti, E.; Massagli, A. [Sorin, Centro Ricerche Nucleari, Saluggia (Italy)

    1963-11-15

    Sodium p-amino-salicylate cannot be sterilized thermally. During manufacture or packing for medical purposes it must therefore be handled under sterilized conditions, with all the difficulties which this involves. The paper quotes experimental data to show that, using gamma irradiation, the product may be sterilized without damage and without the formation of substances harmful from the medical standpoint. (author) [French] Le p-amino salicylate de sodium ne peut Etre sterilise par la chaleur. Pour l'emploi de ce produit comme medicament on est donc oblige de l e manipuler tant pour la fabrication que pour l'emballage, dans des locaux steriles, avec toutes les difficultes qui s'ensuivent. Dans ce travail, les auteurs ont pu demontrer experimentalement la possibilite de steriliser le produit par irradiation gamma, sans endommager le produit et sans formation de substances nocives pour l'emploi medical. (author) [Spanish] El pamino salicilato de sodio no puede esterilizarse por vfa termica y, por lo tanto, para emplearlo como medicamento es preciso prepararlo y empaquetarlo en locales esterilizados, con las dificultades consiguientes; Los autores han demostrado experimentalmente que es posible esterilizar este compuesto por exposicion a los rayos gamma, sin alterarlo y sin que se formen substancias nocivas desde el punto de vista medico. (author) [Russian] Natrievaya sol' paraaminosalitsilovoj kisloty ne mozhet byt' sterilizovana pri pomoshchi nagreva, i dlya togo, chtoby ispol'zovat' ehtot produkt v kachestve medikamenta, nuzhno obrabatyvat' ego kak v protsesse proizvodstva, tak i pri upakovke v steril'nykh pomeshcheniyakh so vsemi vytekayushchimi otsyuda trudnostyami. V dannoj rabote avtory smogli ehksperimental'nym putem dokazat' vozmozhnost' sterilizatsii ehtogo produkta gamma-oblucheniem bez ushcherba dlya ehtogo produkta i bez obrazovaniya vrednykh veshchestv, chto pozvolyaet ego v meditsine. (author)

  14. Radiomimeticity of the system H{sub 2}O{sub 2}/Fe(II) on nucleic acid components. Kinetics study; Radiomimeticidad del sistema H{sub 2}O{sub 2}/Fe(II) sobre components de Acidos Nucleicos. Estudio Cinetico

    Energy Technology Data Exchange (ETDEWEB)

    Cirauqui, R; Mingot, F; Davila, C A

    1974-07-01

    The kinetic study of the action of a redox system on DNA monomers allowed us to make criticisms on radiomimetic character of this system. Assuming that in both cases, gamma radiolysis of aerated aqueous solutions and action of H{sub 2}O{sub 2} / Fe(II) system in the same conditions, the reactive species is the OH radical, we propose the kinetic expressions that are confirmed by our experimental results. Some of the accepted G-values are corrected in view of our results. Al so these results put in evidence mechanisms of molecular repair after radical attack. (Author) 79 refs.

  15. The preparation of nucleotides uniformly labelled with carbon-14 by biosynthetic methods. Isolation of adenylic, uridylic, cytidylic,and guanylic acids, from the alkaline hydrolysate of escherichia coli RNA; Preparacion de nucleiotidos uniformemente marcados con 14{sup C}, por via biosintetica. Aislamiento de los acidos adenilico, uridilico, citidilico y guanilico, procedentes de la hidrolisis alcalina de RNA de escherichia Coli.

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Pineda, M D; Pacheco Lopez, J

    1978-07-01

    A method is described for the preparation and analysis of adenylic, uri dilic, cytidi- 11c and guanylic acids, labelled with 14{sup C}. Escherichia coli cells have been labelled by growing them in a medi dia containing glucose-14{sup C} as their only source of carbon. RNA is isolated from the cells, and after hydrolysis of the molecule the resulting nucleotides are separated by gel filtration and exchange chromatography. Chemical and radiochemical purity of the Isolated nucleotides is determined, and also its specific radioactivity. (Author) 30 refs.

  16. The sealing of second mandibular temporary molar pits and fissure with the laser of Nd: YAG, phosphoric acid and the glass ionomer cement; Selamento de fossulas e fissura de segundo molar deciduo inferior com laser de Nd: YAG, acido fosforico e cimento de ionomero de vidro

    Energy Technology Data Exchange (ETDEWEB)

    Toda, Maria Aparecida

    2003-07-01

    The main of our study was to check the sealing of second mandibular temporary molar pits and fissure, in vitro, with the laser of Nd: YAG, phosphoric acid at 37% and the glass ionomer cement (CIV, Fuji IX GC).The proposal was to check the structural morphologic changes in the laser irradiation upon the enamel surface to watch the pits and fissure sealing with the glass ionomer cement use after the laser irradiation and to verify the efficiency of the 'double conditioning' (phosphoric acid + Nd: YAG). At the same time we watch the evolution of the temperature in the pulp chamber's inside. Our desire was to achieve a therapeutic alternative technic to prevent the dental caries. The Nd: YAG laser parameters were the same: 79 mJ of energy per pulse; frequency of 5 Hz; mean power of 0,4 W; optical fiber on contact of 320 {mu}m diameter; fluency of 99,52 J/ cm{sup 2}, assuming that the only differential was the time of the laser application on the enamel surface. The samples were prepared with this way: Laser Nd: YAG (53 second) + acid + CIV (Fuji IX); Laser Nd: YAG (53 s); Laser Nd: YAG (20 s + 20 s) + acid + CIV; Laser Nd: YAG (20 s + 20 s); Acid + CIV; Control. Through the scanning electron microscopy (MEV) we noticed fusion and resolidification regions due to the laser irradiation and a better adaptation of the glass ionomer cement when we did the 'double conditioning'. Concerning the temperature increase we can conclude that the echeloned period was the best recommended because the temperature was found in a pattern that would not cause any damage to the dental pulp. For future studies we suggest a longer relaxing time between the laser irradiation, a comparative study of this method with other lasers, the use of other sealing materials and the study with the permanent teeth. (author)

  17. Synthesis of polyaniline catalysed by Cu(I), Ni(II) and Fe(II) supported on the polyethylene-i-acrylic acid copolymer; Sintesis de polianilina catalizada por Cu(I), Ni(II) y Fe(II), soportados en el copolimero polietileno-i-acido acrilico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, L.; Urena, F.; Lopez, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    In this study the active sites of acrylic acid (AA) were grafted in low density polyethylene (PEBD) using gamma radiation. Subsequently, the graft copolymer PEBD-i-AA was coordinated with different metals such as copper, nickel and iron. The organometallic copolymers so formed were used as catalysts in the aniline polymerization reaction. Finally, it was realized the characterization of the obtained products, determining their thermal properties, copolymer graft percentage, quantification of the metal contained in the complex as well as polymerization and electric conductivity percentages of the poly aniline film. (Author)

  18. Oxidizing gel formulation for nuclear decontamination: rheological and acidic properties of the organic matrix and its ozonolysis; Formulation d'un gel oxydant a matrice organique applicable a la decontamination nucleaire: proprietes rheologiques, acido-basiques et ozonolyse de la matrice

    Energy Technology Data Exchange (ETDEWEB)

    Rouy, E

    2003-10-15

    An acidic and oxidizing gel was formulated with a purely organic matrix, xanthan gum, at low concentrations (1 to 2 wt %). This polymer gel was investigated in various media (aqueous, acidic and ceric) by means of rheology: shear thinning behaviour, thixotropy, yield stress... Evidences of unexpected rheological properties in highly concentrated media show that xanthan is quite convenient for industrial projection of this type of gel on metallic walls in nuclear plants, notwithstanding its time-limited resistance to oxidation (about a few hours). Complexation mechanisms between ceric species and polar sites of the polymer led us to characterise acidic properties of our xanthan sample by potentiometric titration and {sup 1}H NMR techniques. The matrix was finally treated by ozonolysis to suppress organic residues, as required to handle nuclear wastes. In acidic medium, ozonolysis of the gel was achieved successfully while in acidic and ceric medium this process showed limited efficiency, needing further investigation to be clarified. (author)

  19. Use of probabilistic safety analysis for design of emergency mitigation systems in hydrogen producer plant with sulfur-iodine technology, Section II: sulfuric acid decomposition; Uso de analisis probabilistico de seguridad para el diseno de sistemas de mitigacion de emergencia en planta productora de hidrogeno con tecnologia azufre-iodo, Seccion II: descomposicion de acido sulfurico

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza A, A.; Nelson E, P. F.; Francois L, J. L. [Facultad de Ingenieria, Departamento de Sistemas Energeticos, UNAM, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)], e-mail: iqalexmdz@yahoo.com.mx

    2009-10-15

    Over the last decades, the need to reduce emissions of greenhouse gases has prompted the development of technologies for the production of clean fuels through the use of primary energy resources of zero emissions, as the heat of nuclear reactors of high temperature. Within these technologies, one of the most promising is the hydrogen production by sulfur-iodine cycle coupled to a high temperature reactor initially proposed by General Atomics. By their nature and because it will be large-scale plants, the development of these technologies from its present phase to its procurement and construction, will have to incorporate emergency mitigation systems in all its parts and interconnections to prevent undesired events that could put threaten the plant integrity and the nearby area. For the particular case of sulfur-iodine thermochemical cycle, most analysis have focused on hydrogen explosions and failures in the primary cooling systems. While these events are the most catastrophic, is that there are also many other events that even taking less direct consequences, could jeopardize the plant operation, the people safety of nearby communities and carry the same economic consequences. In this study we analyzed one of these events, which is the formation of a toxic cloud prompted by uncontrolled leakage of concentrated sulfuric acid in the second section of sulfur-iodine process of General Atomics. In this section, the sulfuric acid concentration is near to 90% in conditions of high temperature and positive pressure. Under these conditions the sulfuric acid and sulfur oxides from the reactor will form a toxic cloud that the have contact with the plant personnel could cause fatalities, or to reach a town would cause suffocation, respiratory problems and eye irritation. The methodology used for this study is the supported design in probabilistic safety analysis. Mitigation systems were postulated based on the isolation of a possible leak, the neutralization of a pond of sulfuric acid and finally washing the same; later some scenarios and modifications were analyzed to determine their impact on the likelihood of failure system and provide feedback design with the information produced in the probabilistic safety analysis. (Author)

  20. Influence of the acid and basic properties of rhenium oxide supported on alumina catalyst on the catalytic performance in olefin metathesis; Influence des proprietes acido-basiques de l`oxyde de rhenium supporte sur les performances catalytiques en metathese des olefines

    Energy Technology Data Exchange (ETDEWEB)

    Nahama, F.

    1996-11-30

    The aim of this work is to study the influence of the acid-basic properties of rhenium oxide supported on alumina catalyst on the catalytic performance in olefin metathesis. The literature data indicate that the environment of the active site does possess acid properties. However, the nature of the acid sites is still matter of debate. Concerning the Re O{sub x} - Al{sub 2}O{sub 3} interactions, we have shown that perrhenate ions are electrostatically absorbed on alumina. The uptake of rhenium is favoured at acidic pH (below 4), and the absorbed rhenium is in equilibrium with rhenium in solution. The results of rhenium extraction by water strongly suggest that the surface compounds of the calcined Re{sub 2}O{sub 7}/Al{sub 2}O{sub 3} materials is aluminium perrhenate. Characterization of surface acidity of the catalyst by infrared spectroscopy reveals that the initiation of the metathesis reaction is governed essentially by Lewis acidity. This strongly supports the role of Lewis acidity, which is exalted by the increase of the rhenium content and the calcination temperature. Finally, we point out by ammonia adsorption-thermodesorption a band at 1320 cm{sup -1} characteristic of the Lewis acidity of aluminium perrhenate. This result is a second indication of the presence of aluminium perrhenate on the Re{sub 2}O{sub 7}/Al{sub 2}O{sub 3} catalyst surface. (author)

  1. The sealing of second mandibular temporary molar pits and fissure with the laser of Nd: YAG, phosphoric acid and the glass ionomer cement; Selamento de fossulas e fissura de segundo molar deciduo inferior com laser de Nd: YAG, acido fosforico e cimento de ionomero de vidro

    Energy Technology Data Exchange (ETDEWEB)

    Toda, Maria Aparecida

    2003-07-01

    The main of our study was to check the sealing of second mandibular temporary molar pits and fissure, in vitro, with the laser of Nd: YAG, phosphoric acid at 37% and the glass ionomer cement (CIV, Fuji IX GC).The proposal was to check the structural morphologic changes in the laser irradiation upon the enamel surface to watch the pits and fissure sealing with the glass ionomer cement use after the laser irradiation and to verify the efficiency of the 'double conditioning' (phosphoric acid + Nd: YAG). At the same time we watch the evolution of the temperature in the pulp chamber's inside. Our desire was to achieve a therapeutic alternative technic to prevent the dental caries. The Nd: YAG laser parameters were the same: 79 mJ of energy per pulse; frequency of 5 Hz; mean power of 0,4 W; optical fiber on contact of 320 {mu}m diameter; fluency of 99,52 J/ cm{sup 2}, assuming that the only differential was the time of the laser application on the enamel surface. The samples were prepared with this way: Laser Nd: YAG (53 second) + acid + CIV (Fuji IX); Laser Nd: YAG (53 s); Laser Nd: YAG (20 s + 20 s) + acid + CIV; Laser Nd: YAG (20 s + 20 s); Acid + CIV; Control. Through the scanning electron microscopy (MEV) we noticed fusion and resolidification regions due to the laser irradiation and a better adaptation of the glass ionomer cement when we did the 'double conditioning'. Concerning the temperature increase we can conclude that the echeloned period was the best recommended because the temperature was found in a pattern that would not cause any damage to the dental pulp. For future studies we suggest a longer relaxing time between the laser irradiation, a comparative study of this method with other lasers, the use of other sealing materials and the study with the permanent teeth. (author)

  2. Evaluation of mitomycin-C effect on biodistribution of {sup 99m}Tc-dimercaptosuccinic acid in BALB/C mice; Avaliacao do efeito da mitomicina-c na biodistribuicao do radiofarmaco acido dimercaptosuccinico marcado com tecnecio-99m em camundongos BALB/C

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Maria Luisa; Britto, Deise Mara de M.; Freitas, Rosimeire de S.; Bernardo-Filho, Mario [Instituto Nacional do Cancer, Rio de Janeiro, RJ (Brazil). Centro de Pesquisa Basica; Braga, Ana Cristina de S.; Bezerra, Roberto Jose A.C. [Universidade do Estado, Rio de Janeiro, RJ (Brazil). Inst. de Biologia Roberto Alcantara Gomes. Dept. de Biofisica e Biometria

    1999-11-01

    The many desirable characteristics of technetium-99m have stimulated the development of labeling techniques for different molecular and cellular structures. It is accepted that a variety of factors such the drug chemotherapy can alter the biodistribution of radiopharmaceuticals. The unknowledge of these factor may result in an unexpected behavior of the radiopharmaceuticals. Since patients on chemotherapeutic treatment can be submitted to a nuclear medicine procedure, we have studied in mice, the effect of mitomycin-C on the {sup 99m} Tc-DMSA used for kidney scintigraphy. Mitomycin-C is an antineoplastic agent obtained from Streptomyces caesptosus. The metabolism of this drug produces different toxic and inactive metabolites. Mitomycin-C 0.15 mg was administered in Balb/c female with an interval of 72 hours. After one hour of the last dose, 0.3 ml of 9{sup 9m}c-DMSA (7.4 MBq) were injected and after 0.5 h the animals were sacrificed. The organs were isolated and counted in a well counter. The percentage of radioactivity (%ATI) were calculated and statistical analysis were performed (Wilcoxon Test). The results have shown that the %ATI: has increased in stomach and uterus, has decreased in kidney and ovary; has not altered in pancreas, spleen, lung, heart, liver, thymus, thyroid, bone and brain. The increase of % ATI could be justified by the metabolic process or the therapeutical effect of mitomycin-C. As an effect of this drug is observed in the uptake of the {sup 99m} Tc-DMSA by the kidney, probably an alteration in the kidney scintigraphy is expected. However, the increase of %ATI of this radiopharmaceutical in other organs by the mitomycin-C could be evaluated carefully. (author) 12 ref., 2 tabs.

  3. Utility of the dimercapto succinic acid pentavalent ({sup 99m} Tc- DMSA V) in the diagnostic of secondary bone leisure at metastasis of diverse primary tumours. Preliminary study; Utilidad del acido dimercapto succinico pentavalente ({sup 99m} Tc-DMSA V) en el diagnostico de lesiones oseas secundarias a metastasis de diversos tumores primarios. Estudio preliminar

    Energy Technology Data Exchange (ETDEWEB)

    Ortega L, N [Hospital de Especialidades ' Dr. Antonio Fraga Mouret' Centro Medico Nacional ' La Raza' , IMSS Mexico D.F. (Mexico); Pichardo R, P A [Medico Nuclear adscrito al servicio de Medicina Nuclear del Hospital de Oncologia, Centro Medico Nacional Siglo XXI, IMSS, Mexico D.F. (Mexico); Marquez H, A [Departamento de Medicina Nuclear, IMSS, Mexico D.F. (Mexico)

    2005-07-01

    The more used method in the diagnosis of secondary bone lesions to become cancerous it is by means of having derived of phosphates like it is the {sup 99m}Tc- MDP. The reason of acquiring searching with the radiopharmaceutical {sup 99m}Tc- DMSA V is with the purpose to find other bone lesions that are not visualized with the gammagraphy with diphosphonate and therefore to increase the specificity of the study. (Author)

  4. EFECTO NEFROPROTECTOR DEL ÁCIDO ASCÓRBICO EN UN MODELO DE DAÑO RENAL INDUCIDO POR GENTAMICINA EN CONEJOS

    Directory of Open Access Journals (Sweden)

    Javier Antonio Padilla Funes

    2013-08-01

    Full Text Available Objetivo. Uno de los efectos secundarios mas notables de la Gentamicina es su nefrotoxicidad. En este estudio se propone el posible efecto nefroprotector del acido ascorbico como barredor de radicales libres de oxigeno. Metodología. Se ejecuto un estudio experimental en 24 conejos machos, raza Nueva Zelanda, cuyo peso fue de 1,5 +/- 0,5 Kg. Los sujetos experimentales fueron distribuidos en tres grupos. El grupo Control se manejo con Gentamicina a dosis de 80 mg/Kg/dia por via IM. El grupo Acido Ascorbico se trato a dosis de 200 mg/kg/dia via IP y Gentamicina 80mg/Kg/dia IM. El grupo Sham se manejo con SSN 0,9% por via IP e IM, durante cinco dias consecutivos, para cada grupo. Se determinaron los siguientes parametros: creatinina serica, N-Acetil s-D glucosaminidasa urinaria (NAG-U, diuresis e histopatologia de las muestras renales. Resultados. La creatinina serica fue significativamente mayor para el grupo Control respecto al grupo Acido Ascorbico (p<0,05. Respecto a la diuresis, se observo una tendencia a la poliuria en el grupo Control. En cuanto a NAG-U, se observo inhibicion completa de la actividad enzimatica en el grupo Acido Ascorbico. El analisis histopatologico demuestra hallazgos de necrosis tubular aguda en el 100% del grupo control, mientras que en el grupo Acido Ascorbico se obtuvo en un 50% de los sujetos unicamente detritos intraluminales. Conclusiones. La administracion concomitante de Acido Ascorbico con Gentamicina, disminuye significativamente el dano tubular renal, evidenciado en los valores de creatinina serica, NAG, diuresis e histopatologia renal.

  5. Caracterização de acetato de celulose obtido a partir do bagaço de cana-de-açúcar por ¹H-RMN 1H-NMR characterization of cellulose acetate obtained from sugarcane bagasse

    Directory of Open Access Journals (Sweden)

    Daniel A. Cerqueira

    2010-06-01

    Full Text Available A celulose do bagaço de cana-de-açúcar foi usada para sintetizar acetato de celulose com diferentes graus de substituição, os quais foram caracterizados por ¹H-RMN através da relação entre as áreas dos picos dos átomos de hidrogênio presentes nos grupos acetato (-(C=OOCH3 e os picos dos hidrogênios ligados aos átomos de carbono dos anéis glicosídicos. A supressão de alguns sinais foi feita para remover sinais de ressonância da água residual nos materiais e também para remover sinais de impurezas no triacetato de celulose. Um método de deconvolução para o cálculo computacional do grau de substituição foi proposto. Os graus de substituição das amostras de acetato de celulose foram 2,94 e 2,60, o que está de acordo com os resultados por determinação química através de uma titulação ácido base.Cellulose from sugarcane bagasse was used for synthesizing cellulose acetate with different degrees of substitution, which were characterized by ¹H-NMR through the relationship between the peak areas of the hydrogen atoms of the acetate groups (-(C=OOCH3 and the peaks of the hydrogen bonded to the carbon atoms of the glucosidic rings. Suppression of some signals was carried out in order to remove the residual water resonance in the materials and those related to impurities in cellulose triacetate as well. A deconvolution method for the computation of the degree of substitution of acetylation is proposed. The degrees of substitution for the cellulose samples were 2.94 and 2.60, in good agreement with those obtained by chemical determination through an acid-base titration.

  6. Avaliação de híbridos de milho obtidos do cruzamento entre linhagens com diferentes níveis de degradabilidade da matéria seca Performance of corn hybrids obtained from crosses of lines with different dry matter degradabilities

    Directory of Open Access Journals (Sweden)

    Marcelo Cruz Mendes

    2008-01-01

    Full Text Available Na recomendação de um híbrido para produção de silagem, não basta apenas considerar a produção de matéria seca; é necessário também que a silagem tenha alta degradabilidade efetiva (DEF da matéria seca da planta inteira. O objetivo deste trabalho foi avaliar as características agronômicas, bromatológicas e de degradabilidade ruminal da matéria seca de híbridos comerciais de milho recomendados para a produção de silagem e de híbridos experimentais provenientes do cruzamento entre linhagens de alta e baixa degradabilidade. Foi avaliado o desempenho de 23 híbridos de milho, sendo dezoito híbridos experimentais e cinco comerciais, indicados para silagem. O experimento foi instalado no ano agrícola 2003/2004, com delineamento experimental de blocos casualizados, com três repetições e a parcela experimental constituída de quatro linhas de 5,0 metros. As plantas foram colhidas a 20 cm do solo, no estádio da linha de leite na metade do grão (farináceo/duro. As silagens foram incubadas in situ por 0, 6, 12, 24 e 96 horas, no rúmen de três vacas fistuladas e a degradabilidade efetiva foi calculada assumindo taxa de passagem de -0,05%/hora. Foi observado que entre as cultivares avaliadas, há híbridos com grande potencial para a produção de silagem de qualidade com alta degradabilidade da matéria seca de planta inteira (DEF, independentemente da textura do grão; é correto o uso da estratégia de sintetizar híbridos visando à alta degradabilidade efetiva da matéria seca da planta inteira (DEF utilizando linhagens que apresentam alta DEF. A baixa correlação da degradabilidade efetiva com características agronômicas e bromatológicas, evidencia a necessidade de maior utilização da DEF na seleção de híbridos de milho, visando à produção de silagem de qualidade.In order to recommend corn hybrids for silage it is not enough to have high dry matter. It is also necessary that the silage presents high effective matter degradation (DEF of the whole plant. This investigation had the objective of evaluating agronomic, bromatologic, and rumen degradability of dry matter of commercial corn hybrids, recommended for silage production, and also experimental hybrids from crosses of lines of high and low degradability. It was evaluated the performance of eighteen experimental hybrids and five commercial hybrids recommend for silage production. The experiment was established in 2003/2004 crop season in randomized block design with three replications. The experimental plot was constituted of four rows 5.0 meters long. Corn plants were harvested at 20 cm from soil level at milk line at half grain stage. The silages were incubated in situ for 0, 6, 12, 24 and 96 hours in the rumen of three fistulated cows. Effective degradability was calculated based on 0.05%/h of passage rate. It was observed that among cultivars there were hybrids, that present good potential for silage production with high effective matter degradation (DEF of the whole plant, independently of grain texture. The strategy of synthesizing hybrids aiming at high dry matter effective degradability based on lines with high DEF is correct. The low correlation between effective degradability with a agronomic, and bromatologic characteristics indicate the need for better use of DEF in order to select corn hybrids of high quality of silage production.

  7. Study of the influence of the temperature in the magnetic properties and in microstructure in the permanent magnets Pr-Fe-B-Nb-Co based obtained by hydrogen; Estudo da influencia da temperatura nas propriedades magneticas e na microestrutura nos imas permanentes a base de Pr-Fe-B-Nb-Co obtidos com hidrogenio

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Suelanny Carvalho da

    2007-07-01

    Fine magnetic powders were produced using the hydrogenation disproportionation desorption and recombination (HDDR) process. The first stage in this work involved an investigation of the effect of the Co content and range of desorption/ recombination temperatures between 800 and 900 deg C with the purpose of optimizing the HDDR treatment for Pr{sub 14}Fe{sub 80}B{sub 6} and Pr{sub 14}Fe{sub bal}Co{sub x}B{sub 6}Nb{sub 0,1} (x= 0, 4, 8, 10, 12, 16) alloys. The cast alloys were annealed at 1100 deg C for 20 hours for homogenization. The processing temperature (desorption/ recombination) affected the microstructure and magnetic properties of the bonded magnets. The alloy with low cobalt content (4 at.%) required the highest reaction temperature (880 deg C) to yield anisotropic bonded magnets. The optimum temperature for alloys with 8 at.% Co and 10 at.% Co were 840 deg C and 820 deg C, respectively. Alloys with high cobalt content (12 at.% and 16 at.%) were processed at 840 deg C. The optimum desorption temperature for achieving high anisotropy for Pr{sub 14}Fe{sub 80}B{sub 6} and Pr{sub 14}Fe{sub 79,9}B{sub 6}Nb{sub 0,1} was 820 deg C. The best remanence (862 mT) was achieved with the Pr{sub 14}Fe{sub 67,9}B{sub 6}Co{sub 12}Nb{sub 0,1} magnet, processed at 840 deg C. Each alloy required an optimum reaction temperature and exhibited a particular microstructure according to the composition. The second stage of the work involved the characterization, for each temperature, of the Pr{sub 14}Fe{sub 80}B{sub 6} HDDR powder processed using X-ray diffraction analysis. The samples of the HDDR material were studied by synchrotron radiation powder diffraction using the Rietveld method for cell refinement, phase quantification and crystallite sizes determination. Scanning electron microscopy has also been employed to reveal the morphology of the HDDR powder. (author)

  8. Lipídios modificados obtidos a partir de gordura do leite, óleo de girassol e ésteres de fitosteróis para aplicação em spreads Modified lipids obtained from milk fat, sunflower oil, and phytosterol esters for application in tablespreads

    Directory of Open Access Journals (Sweden)

    Juliana Neves Rodrigues Ract

    2008-01-01

    Full Text Available The objective of this paper was to evaluate the modifications in milkfat properties with the addition of sunflower oil (SO and phytosterol esters (PE and chemical interesterification. Fatty acid composition, softening point and consistency were determined. The saturation degree of milkfat decreased with the addition of SO and PE. Consequently, milkfat presented lower softening point and consistency. Chemical interesterification caused an increase in softening point due to the formation of higher amounts of trissaturated triacylglycerols with rearrangement. The incorporation of unsaturated fatty acids from SO and PE by milkfat triacylglycerols after chemical reaction caused linearization of consistency curves.

  9. Synthesis of ceramic powder of TiO{sub 2} doped with Zr by the Pechini Method applied in ceramic membranes for water treatment; Sintese de pos ceramicos de TiO{sub 2} dopado com Zr obtido pelo Metodo Pechini aplicados em membranas ceramicas para tramento de agua

    Energy Technology Data Exchange (ETDEWEB)

    Farias, R.F.V.; Fernandes, M.S.M.; Silva, R.S.; Franca, K.B.; Lira, H.L.; Bonifacio, M.A.R., E-mail: raissavenuto@gmail.com, E-mail: maniza-f@hotmail.com, E-mail: raquel.ssb@hotmail.com, E-mail: kepler@labdes.ufcg.edu.br, E-mail: helio.lira@ufcg.edu.br, E-mail: m_aparecidaribeiro@yahoo.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2016-07-01

    This paper describes the synthesis of ceramic powder of TiO2 doped with Zr by the polymeric precursor method, also known as Pechini method applied in ceramic membranes for water treatment. Three compositions were synthesized according to the molar ratio Ti{sub x}-1Zr{sub x}O{sub 2} (x = 0.25, 0.50 and 0.75 moles), calcined at 700° C/1h. The samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and microbiological analysis. The presence of the doping element was not decisive in the average size of crystallite, which ranged from 5.5 to 11.3 nm. The SEM images showed clusters with uniform surface and granular aspect, it is still possible to see a clearly porous structure formed by clusters of uniform size for all samples. The microbiological analyses of powders have revealed that they have bactericidal properties. (author)

  10. Síntese e caracterização de um novo composto obtido pela reação entre hidreto de trifenilestanho e ácido (±)-mandélico e avaliação de seu potencial biocida sobre o fungo Fusarium oxysporum f. sp. cubense

    OpenAIRE

    Barbiéri, Roberto Santos; Lima, Elysio Prado de; Silva, Samuel Ferreira da; Dias, Allan Kardec Carlos; Cardoso, Maria das Graças; Terra, Vilma Reis

    2006-01-01

    O presente artigo refere-se à síntese e caracterização de um novo composto organoestânico, pela reação de ácido (±)-mandélico e hidreto de trifenilestanho, em meio de acetonitrila e sob refluxo, [(C6H5)2SnMand 2] {Mand = C6H5CH(OH)COO], identificado por análise elementar de carbono e hidrogênio, espectroscopia no infravermelho e espectrometria de massa de alta resolução, para o qual foi proposta estrutura octaédrica com o grupo fenila em posição trans. Verificou-se que o composto apresenta aç...

  11. Physicochemical characteristics and fatty acids profile of olive oils from different varieties of olive tree in southern Minas Gerais - Brazil / Características físico-químicas e perfil de ácidos graxos de azeites obtidos de diferentes variedades de oliveiras introduzidas no Sul de Minas Gerais - Brasil

    Directory of Open Access Journals (Sweden)

    Michel Cardoso de Angelis Pereira

    2010-04-01

    Full Text Available This work had as an objective, to analyze, both physically and chemically, five olive tree varieties kept in the EPAMIG Germplasm Bank at the Experimental Farm, in the town of Maria da Fé, MG. Physical characteristics of the fruits and seeds (weight, diameter and length and some chemical characteritics of the oils extracted from five varieties (acidity, iodine, saponification, peroxide indices and the fatty acid profile were evaluated. The Negroa variety presented an average percent of lipids (28.2% significantly higher than the others (p Este trabalho teve por objetivo analisar, física e quimicamente, cinco variedades de oliveiras mantidas no banco de germoplasma pela EPAMIG, na Fazenda Experimental no município de Maria da Fé, MG. Foram avaliadas características físicas dos frutos e sementes (peso, diâmetro e comprimento e algumas características químicas dos azeites extraídos de cinco variedades (índice de acidez, iodo, saponificação, peróxidos e perfil de ácidos graxos. A variedade Negroa apresentou percentual médio de lipideos (28,2% significativamente maior que as demais (p < 0,05. Dentre as variedades estudadas a Negroa e JB1 apresentaram maior produtividade e valores de acidez, índice de saponificação, iodo e peróxidos mais compatíveis com as normas da ANVISA (2005 e o Codex Alimentarius (2003. Todas as variedades cultivadas em Maria da Fé apresentaram conteúdos de ácido oléico dentro do recomendado pelo Codex alimentarius e significativamente maior que o teor de ácido oléico do azeite comercial extra virgem analisado (p < 0,05. O perfil de ácidos graxos encontrado demonstrou que todas as variedades (JB1, Negroa, Ascolano 315, 0025 e 0004 estão com seus valores adequados para os principais grupos de ácidos graxos, quando comparados com a legislação. Os resultados indicam que das variedades analisadas a Negroa e JB1 apresentam melhor potencial para utilização na produção de azeite de oliva.

  12. Pós de Al2O3/SiC obtidos a partir de reação de redução carbotérmica Al2O3/SiC powders from carbothermal reduction reaction

    Directory of Open Access Journals (Sweden)

    F. M. Spiandorello

    1999-12-01

    Full Text Available Neste trabalho foram utilizadas matérias-primas naturais para a obtenção de pós Al2O3/SiC através da redução carbotérmica das mesmas por um agente rico em carbono. Os aluminossilicatos estudados foram caulim, cianita e ilita-moscovita, sendo que os mesmos foram reduzidos ou por negro de fumo ou por grafite. Os pós resultantes da reação foram caracterizados por microscopia eletrônica de varredura e transmissão, difração de raios X e picnometria de hélio. Durante a reação, as diferenças existentes tanto na estrutura das matérias-primas quanto na composição química produziram pós com morfologia diversa. Foram encontradas estruturas como grandes aglomerados esféricos, whiskers, partículas e aglomerados fibrosos.In this work natural raw materials were used to obtain Al2O3/SiC powders by carbothermal reduction. The aluminosilicates studied were kaolin, kyanite and illite-muscovite and the reductor agents were carbon black or graphite. The reaction powders were characterized by transmission and scanning electron microscopy, X-ray diffraction and helium picnometry. During the reaction, the differences among the raw materials structures as well as into the chemical composition produced powders with several morphologies. Big spherical agglomerates, whiskers, particles and fibrous clusters were found.

  13. Avaliação do rendimento do queijo tipo prato obtido por modificações no processo tradicional de fabricação Evaluation of the yield of prato cheese obtained by modifications of the traditional manufacturing process

    Directory of Open Access Journals (Sweden)

    Leila M. Spadoti

    2003-12-01

    Full Text Available O objetivo deste trabalho foi comparar os efeitos das seguintes modificações no processo com o processo tradicional de fabricação de queijo Prato: uso de leite concentrado por ultrafiltração-(LCUF até um FCV=4:1; pré-fermentação de parte deste LCUF e aquecimento indireto da massa sobre o rendimento-(R, rendimento ajustado-(RAJ e a recuperação de gordura-(RGq e de proteína-(RPq no queijo. Foram realizados 3 processamentos, com 5 tratamentos cada, respectivamente: Tratamento 1-(T1, sem ultrafiltração; Tratamento 2-(T2, ultrafiltração sem pré-fermentação do LCUF; Tratamento 3-(T3, ultrafiltração com pré-fermentação de 10% do LCUF; Tratamento 4-(T4:, ultrafiltração com pr��-fermentação de 20% do LCUF e com aquecimento direto da massa e Tratamento 5-(T5: ultrafiltração com pré-fermentação de 20% do LCUF e único com aquecimento indireto. Os resultados de composição, rendimento e recuperação de componentes dos 5 tratamentos foram avaliados estatisticamente. Os tratamentos T2, T3, T4 e T5 apresentaram menores valores de R, RAJ e RGq e maiores valores de RPq, porém, a pré-fermentação com cozimento indireto apresentou a tendência de melhores RGq e RAJ. Menores rendimentos e RGs possivelmente resultaram da estrutura fibrosa apresentada por esses coágulos, bem como pela dificuldade de corte e manipulação dos mesmos.The objective of this research was to study the effect of the following modifications on the traditional manufacturing process of Prato cheese: use of milk concentrated by ultrafiltration (LCUF up to a VCF=4:1; partial LCUF pre-fermentation; indirect curd cooking; on yield-(R, adjusted yield (RAJ and fat (RGq and protein (RPq recovery on cheese, and comparison of the results with a standard cheese. Three processings with five treatments each were realized, respectively: treatment 1-(T1, without ultrafiltration; Treatment 2-(T2, ultrafiltration without LCUF pre-fermentation; Treatment 3-(T3, 10% LCUF pre-fermentation; Treatment 4-(T4, 20% LCUF pre-fermentation and direct curd heating; Treatment 5-(T5, 20% LCUF pre-fermentation and the only one indirect curd heating. It was realized composition, yield, and component recovery for all five treatments, and the results statistically evaluated. Treatments T2, T3, T4, and T5 presented lower values for R, RAJ and RGq, however, the pre-fermentation with indirect curd cooking presented a tendency of better values for RGq and RAJ. Lower yields and RGs possibly resulted from the fibrous structure presented by these curds as well as due to the difficulty on cutting and handling them.

  14. Synthesis of ceramics membranes using ZrO{sub 2} obtained by Pechini method aiming it application in oil/water separation; Sintese de membranas ceramicas utilizando ZrO{sub 2} obtido pelo metodo Pechini visando sua aplicacao na separacao oleo/agua

    Energy Technology Data Exchange (ETDEWEB)

    Maia, D.F.; Lira, H.L.; Vilar, M.A.; Costa, A.C.F.M.; Oliveira, J.B.L.; Kiminami, R.H.G.A.; Gama, L.

    2004-07-01

    The water produced in the oil production presents emulsified oil drops of difficult separation causing problems in the reinjection and the discarding. The conventional methods used in the separation oil/water don't clean all the water with efficiency and low cost. Thus, the ceramic membranes appear as a new option for being material very resistant chemistry and thermal, of high perm selective and high efficiency in use in processes of micro filtration and ultrafiltration separation. The zirconia is considered an adequate material to obtain of such membranes and the Pechini method is one promising technique in the attainment of after ultrafine with controlled characteristics. Thus the objective of this work was to prepare ceramic membranes from after synthesized by the Pechini method. The results had shown that the Pechini method was efficient in the attainment of ZrO{sub 2} powder, nanometric, with size of crystal of 7,2 nm and with average diameter of agglomerated 4,94{mu}, indicating that this material can be used in the attainment of membranes of micro filtration and ultrafiltration, adjusted to the separation oil/water The micrographs of the obtained membranes show a homogeneous surface where if it can visualize pores uniformly distributed. (author)

  15. Rheological behavior of nanocomposite HMSPP (High Melt Strength Polypropylene) obtained by the addition of clay 'chocolate' organophilizated as reinforcement agent; Comportamento reologico de nanocomposito de HMSPP (Polipropileno com alta resistencia do fundido) obtido pela adicao de argila 'chocolate' organofilizada como agente de reforco

    Energy Technology Data Exchange (ETDEWEB)

    Fermino, D.M.; Valenzuela-Diaz, F.R., E-mail: dmfermino@usp.com.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Escola Politecnica. Dept. de Engenharia Metalurgica e de Materiais; Parra, D.F.; Lugao, A.B. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente

    2012-07-01

    The objective of this study is to obtain a nanocomposite with a bentonite treated in laboratory in comparison to a commercial bentonite and the study of their rheological behavior. The treatment of the sodium clay organophilic in laboratory it was well succeeded as the result of FTIR testing and there was formation of nanocomposites with intercalated clays as XRD assay. In the rheology assay there was increase in a complex viscosity in all of nanocomposite samples of HMSPP. There were small changes in G' module and G″ for nanocomposites. Only with these rheology results we can not say it is interleaved microcomposite or nanocomposite because the criteria of both were not fully met.

  16. Carboximetilação de polpas de bagaço de cana-de-açúcar e caracterização dos materiais absorventes obtidos Carboxymethylation of pulps from sugar cane bagasse and characterization of the produced absorbent materials

    Directory of Open Access Journals (Sweden)

    Luís C. Morais

    1999-12-01

    Full Text Available Os processos soda/antraquinona e etanol/água foram aplicados à produção de polpas de fibras e de medulas de bagaço de cana-de-açúcar. Tais polpas foram carboximetiladas em suspensão de isopropanol/água (8/1 m/m por 4 horas a 80(0C, empregando a relação molar 8,5/5,4/1 para ácido monocloroacético/hidróxido de sódio/celulose. Os graus médios de susbtituição dos produtos carboximetilados foram determinados por espectroscopia ¹H R.M.N. e variaram entre 0,44 e 1,27 em função da polpa empregada na derivatização. Os derivados mais substituídos foram os melhores absorventes, sugerindo que a capacidade de retenção de água desses produtos está diretamente associada a seus graus de substituição.Two pulping methods were used on fibers and pith of sugar cane bagasse: soda/anthraquinone and ethanol/water. These pulps were submitted to carboxymethylation in a slurry of isopropanol/water (8/1 m/m at 80ºC for 4 hours using a molar relation 8,8/5,4/1 of monochloroacetic acid/sodium hydroxyde/cellulose. The average degrees of substitution of the carboxymethylated products, determined by ¹H N.M.R. spectroscopy, were between 0.44 and 1.27, depending on the pulp employed for derivatization. The more substituted pulps were the more absorbent products, suggesting that the water retention capacity of these products is closely associated to their degrees of substitution.

  17. Caracterização textural e estrutural de V2O5/TiO2 obtidos via sol-gel: comparação entre secagem convencional e supercrítica Textural and structural characterization of V2O5/TiO2 catalysts obtained by the sol-gel method: comparison between conventional and supercritical drying

    Directory of Open Access Journals (Sweden)

    Cristiane B. Rodella

    2002-05-01

    Full Text Available This work describes a modified sol-gel method for the preparation of V2O5/TiO2 catalysts. The samples have been characterized by N2 adsorption at 77K, x-ray diffractometry (XRD and Fourier Transform Infrared (FT-IR. The surface area increases with the vanadia loading from 24 m² g-1, for pure TiO2, to 87 m² g-1 for 9wt.% of V2O5. The rutile form is predominant for pure TiO2 but became enriched with anatase phase when vanadia loading is increased. No crystalline V2O5 phase was observed in the catalysts diffractograms. Two species of surface vanadium observed by FT-IR spectroscopy a monomeric vanadyl and polymeric vanadates, the vanadyl/vanadate ratio remains practically constant.

  18. Compostos voláteis dos frutos de maracujá (Passiflora edulis forma Flavicarpa e de cajá (Spondias mombin L. obtidos pela técnica de headspace dinâmico Volatile compounds in passion fruit (Passiflora edulis forma Flavicarpa and yellow mombin (Spondias mombin L. fruits obtained by dynamic headspace technique

    Directory of Open Access Journals (Sweden)

    Nerendra Narain

    2004-06-01

    Full Text Available Entre as inúmeras frutas tropicais e subtropicais produzidas no Brasil, duas que se destacam do ponto de vista do aroma da polpa são maracujá amarelo (Passiflora edulis forma Flavicarpa e cajá (Spondias mombin L.. Os voláteis da polpa destas frutas foram capturados pela técnica de headspace dinâmico e analisados no sistema de cromatografia gasosa de alta resolução e espectrometria de massa. Foram identificados 48 e 33 compostos voláteis na polpa de maracujá e cajá, respectivamente. Os compostos voláteis predominantes na polpa de maracujá pertenceram às classes de ésteres (59,24%, aldeídos (15,27%, cetonas (11,70% e álcoois (6,56%, enquanto na polpa de cajá as principais classes de compostos foram de ésteres (48,76%, álcoois (21,69%, aldeídos (11,61% e cetonas (4,19%. Outros compostos aromáticos característicos foram para maracujá: beta-ionona e linalol e para cajá: gama-octalactona e ácidos butírico e hexanóico.Among the numerous tropical and sub-tropical fruits produced in Brazil, two that attain relatively greater importance from the point of view of aroma of their pulp are yellow passion fruit (Passiflora edulis forma Flavicarpa and yellow mombin (Spondias mombin L.. The volatile components in the pulp of these fruits were captured by dynamic headspace technique and were analyzed in a system of high-resolution gas chromatography and mass spectrometry. Forty-eight and thirty-one volatile compounds were identified in passion fruit and yellow mombin fruit pulp, respectively. The predominant volatile compounds in passion fruit pulp belonged to the classes of esters (59.24%, aldehydes (15.27%, ketones (11.70% and alcohols (6.56% while in the yellow mombin pulp, the principal classes of compounds were esters (48.76%, alcohols (21.69%. aldehydes (11.61% and ketones (4.19%. The other characteristic aroma compounds for passion fruit were beta-ionone and linalool and for yellow mombin were gamma-octalactone, butanoic and hexanoic acids.

  19. Diversidade genética de isolados de Mycosphaerella musicola obtidos de bananais do norte de Minas Gerais, Brasil por meio de marcadores RAPD Genetic diversity of Mycosphaerella musicola isolates obtained from bananas of north of Minas Gerais, Brazil by using RAPD markers

    Directory of Open Access Journals (Sweden)

    Janaína Ribeiro Oliveira

    2013-01-01

    Full Text Available Onze primers RAPD foram utilizados para avaliar a variabilidade genética de 31 isolados de M. musicola coletados a partir de folhas de bananeiras 'Prata Anã' e 'Nanica', cultivadas no Norte de Minas Gerais. Foram amplificados um total de 83 bandas sendo 73 polimórficas, dando uma média de 6,6 bandas polimórficas por primer. As distâncias genéticas observadas variaram de 0,56 a 0,06 entre os isolados, com distância média de 0,25. O dendrograma construído com base no método UPGMA revelou a formação de 8 grupos, não sendo observada correlação entre a diversidade genética dos isolados e as origens geográficas dos isolados avaliados.Eleven primers RAPD were used to estimate the genetic variability between 31 isolates of M. musicola collected from 'PrataAnã' and Nanica bananas that were cultivated in northern Minas Gerais, Brazil. A total o 83 fragments were amplified, of which 73 were polymorphic, corresponding to an average of 6.6 polymorphic fragments per primer. The genetic distances ranged from 0.06 to 0.56 and the average distance of 0.21. A dendrogram constructed based on the UPGMA clustering method revealed 8 and no correlation between molecular grouping and geographical origin was observed.

  20. Influência do tempo de incubação e do tamanho de partículas sobre os teores de compostos indigestíveis em alimentos e fezes bovinas obtidos por procedimentos in situ Influence of incubation time and particles size on indigestible compounds contents in cattle feeds and feces obtained by in situ procedures

    Directory of Open Access Journals (Sweden)

    André Oliveira Casali

    2008-02-01

    Full Text Available Objetivou-se avaliar a influência do tempo de incubação in situ e do tamanho de partículas sobre as estimativas das frações indigestíveis da matéria seca (MSi, da fibra em detergente neutro (FDNi e da fibra em detergente ácido (FDAi em alimentos e fezes bovinas. Avaliaram-se amostras de fubá de milho, casca de soja, farelo de trigo, farelo de soja, farelo de algodão, silagem de milho, capim-elefante, cana-de-açúcar, feno de capim-braquiária, palha de milho e fezes de bovinos alimentados com dietas com alto ou baixo nível de concentrado. As amostras foram processadas em moinho com peneiras de porosidade 1, 2 ou 3 mm e acondicionadas (20 mg MS/cm² de superfície em sacos de tecido não-tecido (100 g/m² de dimensão 4 × 5 cm. Os materiais foram divididos em três grupos, de modo que as amostras de cada grupo foram incubadas no rúmen de três novilhas mestiças (Holandês × Zebu. O procedimento de incubação foi repetido três vezes e, a cada período, procedeu-se à incubação dos grupos em animais distintos. Foram utilizados os tempos: 0, 12, 24, 48, 72, 96, 120, 144, 168, 192, 216, 240 e 312 horas. Os teores de MSi, FDNi e FDAi foram avaliados seqüencialmente para interpretação dos perfis de degradação por modelo logístico não-linear. Não houve efeito do tamanho de partículas sobre as estimativas de FDNi e FDAi. Verificaram-se efeitos dos tamanhos de partículas sobre a velocidade de degradação da MS da silagem de milho e do fubá de milho, da FDN da cana-de-açúcar, da silagem de milho e da palha de milho e sobre a velocidade de degradação da FDA da cana-de-açúcar. Para esses alimentos, o tamanho de partícula associou-se positivamente ao tempo necessário para estimar a fração indigestível. Tempos de incubação de 240 horas para MS e FDN e de 264 horas para FDA são recomendados para obtenção de estimativas exatas das frações indigestíveis. O uso de partículas de 2 mm é recomendado por proporcionar maior precisão das estimativas.The aim of this work was to evaluate the effects of in situ incubation time and particles size on the estimates of indigestible fractions of dry matter (iDM, neutral detergent fiber (iNDF, and acid detergent fiber (iADF in cattle feeds and feces. Samples of corn grain, wheat bran, corn silage, elephant grass, sugarcane, signal grass hay, corn straw, and feces obtained from cattle fed high and low concentrate diets were used. The samples were ground through 1 mm, 2 mm, and 3 mm screen sieve and put in 4 × 5 cm non-woven textile bags (20 mg DM/cm² of surface. The samples were divided in three groups, being each group incubated in the rumen of a crossbred heifer. The incubation procedure was conducted three times with the change of groups among animals. The following incubation times were used: 0, 12, 24, 48, 72, 96, 120, 144, 168, 192, 216, 240, and 312 hours. The contents of iDM, iNDF, and iADF were evaluated sequentially in each bag. The degradation profiles were interpreted by a non-linear logistic model. The particles size did not influence the estimates of iNDF and iADF. However, the particles size altered the rumen degradation dynamic rates of DM for corn silage and corn grain; of NDF for sugarcane, corn silage, and corn straw; and ADF for sugarcane. For those samples, the particle size has been positively associated with the incubation time necessary to estimate the indigestible fraction. Incubation times of 240 hours for DM and NDF, and 264 hours for ADF were suggested for obtaining more accurate estimates of indigestible fractions. The use of 2 mm particle size can increase the precision of estimates.

  1. Characteristics of charcoal fines obtained by rapid pyrolysis process of elephant grass in fluidized bed in different operation conditions; Caracteristicas dos finos de carvao vegetal obtido pelo processo de pirolise rapida de capim elefante em leito fluidizado em diferentes condicoes de operacao

    Energy Technology Data Exchange (ETDEWEB)

    Mesa Perez, Juan Miguel; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Fac. de Engenharia Agricola; Gomez, Edgardo Olivares; Rocha, Jose Dilcio [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico

    2004-07-01

    This paper presents a study about the effect of excess air and the inert fixed bed height upon the characteristics of fine charcoal particles and the main reactor parameters. The pyrolysis process is considered as a method to concentrate carbon in fine charcoal particles and a method to reduce oxygen content in the biomass.The study concludes that the operation point which gives the highest percentage if carbon fine charcoal particles and reduces the most the oxygen in biomass corresponds to a fixed bed height of 207 mm and excess air of 8%. (author)

  2. The effect of the addition of the elements Ni, Zn and Co in a composite AlTiO{sub 2} obtained by high-energy milling and sintering process; Efeito da adicao dos elementos Ni, Zn ou Co no composito AlTiO{sub 2} obtido por moagem de alta energia e sinterizacao

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, C.O. de; Coelho, R.E.; Conrado, L.C.; Nascimento, C.S.; Teixeira, C.A.; Mendonca, E.S., E-mail: cristiane.olv.carvalho@hotmail.com [Instituto Federal de Educacao, Ciencia e Tecnologia da Bahia (IFBA), BA (Brazil)

    2016-07-01

    The present work use aluminum scrap with addition of TiO{sub 2}, Ni, Zn or Co to preparation and characterization of nanocomposites. The aluminum were cut and subjected to high energy milling for 2 hours at 1200rpm. The obtained powder was added to TiO{sub 2}, Ni, Zn or Co in a nominal composition 97Al-2TiO{sub 2}-1X (X = Ni, Zn or Co) (weight %) and again, the mixture was subjected to milling for 1 hour at 1000rpm. Grinding powders were hot pressed in the closed die and then removed; the compressed were sintered at 950°C in a tubular furnace N{sub 2} passing atmosphere. The samples obtained were characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD). The results of SEM images showed a very refined microstructure and an aluminum matrix without porosity. (author)

  3. Mullite-based coating on silicon carbide refractory obtained from PMSQ [poly(methylsilsesquioxane); Recobrimentos à base de mulita em refratário de carbeto de silício obtidos a partir de PMSQ [poli (metilsilsesquioxano)] e alumínio

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Glauson Aparecido Ferreira

    2017-07-01

    Silicon carbide (SiC) presents low thermal expansion, high strength and thermal conductivity. For this reason it is used as kiln furniture for materials sintering. On the other hand, SiC degrades at high temperature under aggressive atmosphere. The use of protective coatings can avoid the right exposition of SiC surface to the furnace atmosphere. Mullite can be a suitable material as protective coating because of its high corrosion resistance and thermal expansion coefficient matching that of SiC (4,7 x 10{sup -6}/°C e 5,3 x 10{sup -6}/°C, respectively). In the present work a mullite coating obtained from ceramic precursor polymer and aluminium powder was studied to be applied over SiC refractories. Compositions were prepared with 10, 20, 30 and 50% (vol.) of aluminium powder added to the polymer. They were used aluminium powders with different distributions sizes These compositions were heat treated at different thermal cycles to determine a suitable condition to obtain a high mullite content. The composition with 20% of the smaller particle size Al powder was selected and used to be applied as a suspension over SiC refractory. The applied suspension, after dried, crosslinked and heat treated, formed a mullite coating over SiC refractory. Cycles of thermal shock were performed in coated and uncoated SiC samples to compare each other. They were carried out 26 cycles of thermal shock, in the following conditions: 600°C/30 min. and air cooling to room temperature. After each thermal shock, samples were analysed by mean of optical and electron microscopy, elastic modulus was also determined. After thermal shock cycles the coating presented good adhesion and no significant damage were observed. (author)

  4. Melhoramento do trigo: XXVIII. Novos genótipos obtidos por seleções em população segregante interespecífica submetida a irradiação gama Wheat breeding: XXVIII. New genotypes obtained by selections in a interespecific segregating population submitted to gamma irradiation

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo de Oliveira Camargo

    1995-01-01

    Full Text Available Compararam-se 23 linhagens provindas de seleções em população submetida à irradiação gama (27,5 krad, em geração F4, do cruzamento interespecífico entre 'BH-1146' (Triticum aestivum L. e 'Anhinga' "S" x Winged "S" (Triticum durum L. e os cultivares BH-1146 e Yavaros "S" (T. durum L. em nove ensaios, denominados "Novas variedades III", instalados em condições de irrigação por aspersão e de sequeiro, analisando-se a produção de grãos, outros componentes da produção e resistência às doenças. Em condição de laboratório, estudou-se a tolerância ao alumínio em soluções nutritivas. As linhagens 11, 12, 13 e 14, de porte médio, com moderada resistência ao acamamento, com ciclo médio da emergência ao florescimento e tolerância à toxicidade de alumínio, destacaram-se quanto à produção de grãos, considerando-se a média dos nove experimentos. Yavaros "S" e as linhagens 8 e 12 apresentaram-se, ao mesmo tempo, imunes ao agente causal da ferrugem-da-folha e moderadamente resistentes ao agente causal de oídio. Todos os genótipos foram suscetíveis aos agentes causais de manchas foliares. As linhagens 3, 9 e 10 mostraram ser fontes genéticas de espiga comprida; a 12, de maior número de espiguetas por espiga; as linhagens 12, 13 e 14, de maior número de grãos por espiga; Yavaros "S", de maior número de grãos por espigueta, e 1, 2, 3, 4, 6, 7, 10, 15 e Yavaros "S", de grãos mais pesados. Todos os genótipos se mostraram tolerantes à toxicidade de Al3+, com exceção de Yavaros "S" e das linhagens 9 e 15, que exibiram elevada sensibilidade.Twenty three selected lines originated from population submitted to gamma irradiation (27.5 krad, in the F4 generation, from the interespecific hybrid between BH-1146 (Triticum aestivum L. and Anhinga "S" x Winged "S" (Triticum durum L. and the check cultivars BH 1146 and Yavaros "S" (T durum L. were evaluated in nine trials, named "New Varieties 111". Evaluation trials were carried out at different locations under upland and sprinkler irrigation conditions, for grain yield, yield components and disease resistance. In laboratory conditions, the germplasms were evaluated for their Al toxicity tolerance in nutrient solutions. The lines 11, 12, 13 and 14 presenting semidwarf plant type, moderate lodging resistance, medium cycle from emergence to flowering and tolerance to aluminum toxicity showed higher productivity in the average of nine experiments. Yavaros "S" and the lines 8 and 12 showed at the same time immune to the causal agent of leaf rust and moderate resistance to the causal agent of mildew, in adult stage. All analysed genotypes were susceptible to the causal agent of leaf spots. The lines 3, 9 and 10 showed to be good genetic sources for long spike; the line 12 for large number of spikelets per spike; the lines 12, 13 and 14 for large number of grains per spike; Yavaros "S" for higher number of grains por spikelet; and the lines 1, 2, 3, 4, 6, 7, 10 and 15, and Yavaros "S", for high grain weight. All of them were tolerant to aluminum toxicity excepting Yavaros "S" and the lines 9 and 15 which exhibited high sensibility.

  5. Gender differences in suicide attempts: preliminary results of the multisite intervention study on suicidal behavior (SUPRE-MISS from Campinas, Brazil Diferenças entre os sexos nas tentativas de suicídio: resultados iniciais do estudo multicêntrico de intervenção no comportamento suicida (SUPRE-MISS obtidos em Campinas, Brasil

    Directory of Open Access Journals (Sweden)

    Sabrina Stefanello

    2008-06-01

    Full Text Available OBJECTIVE: To identify sociodemographic, psychosocial and clinical differences between men and women who attempted suicide and were seen at a university general hospital. METHOD: This is a non-controlled cross-sectional study, sub-project of the Multisite Intervention Study on Suicidal Behavior by the World Health Organization. A standardized interview that comprised psychometric scales was used. The comparison between genders was made by means of uni and multivariate logistic regression. RESULTS: 210 subjects (68.1% women participated. Women had worse scores on the WHO Well-Being Index (p = 0.005, the Beck Depression Inventory (p = 0.01 and the Psychiatric Disability Assessment Schedule (p = 0.03. In the multivariate logistic regression, men presented more mental disorders due to alcohol and drug use (26.1% vs 7%, p = 0.02 and used alcohol at the suicide attempt more frequently (28.3% vs 16%, p = 0.03. Men reported that most of the time they had been feeling "active and vigorous" (50% vs 22%, p OBJETIVO: Identificar diferenças entre os sexos em variáveis sociodemográficas, psicossociais e clínicas em indivíduos que tentaram o suicídio e foram atendidos em um hospital geral universitário. MÉTODO: Estudo transversal não-controlado, subprojeto do Estudo Multicêntrico de Intervenção no Comportamento Suicida, da Organização Mundial de Saúde. Utilizou-se uma entrevista padronizada, incluindo escalas psicométricas. A comparação entre os sexos foi feita usando-se regressão logística uni e multivariada. RESULTADOS: Dos 210 sujeitos, 143 (68,1% foram do sexo feminino. As mulheres tiveram piores escores no Índice de Bem-Estar OMS (p = 0,005, na escala de Beck de Depressão (p = 0,01 e na escala de Desempenho do Papel Social (p = 0,03. Na regressão logística multivariada, encontraram-se mais problemas por uso de álcool e drogas entre os homens (26,1% vs 7%, p = 0,02. Estes se valeram mais dessas substâncias na tentativa de suicídio (28,3% vs 16%, p = 0,03 e relataram que "vinham se sentindo vigorosos" a maior parte do tempo (50% vs 22%, p < 0,001. Mulheres relataram ter sofrido mais abuso físico e sexual (27% vs 8,7%, p = 0,01. CONCLUSÃO: Encontraram-se algumas características distintas entre homens e mulheres que tentaram suicídios. Tais diferenças, que podem estar igualmente presente na população geral, sugerem novos estudos e a adoção de diferentes estratégias visando à prevenção do suicídio entre homens e mulheres.

  6. Preliminary study in development of glass-ceramic based on SiO{sub 2}-LiO{sub 2} system, starting of different SiO{sub 2} starting powders; Um estudo preliminar do desenvolvimento de materiais vitroceramicos do sistema SiO{sub 2}-LiO{sub 2} obtidos a partir de diferentes fontes de silica

    Energy Technology Data Exchange (ETDEWEB)

    Daguano, J.K.M.F.; Santos, F.A.; Santos, C.; Marton, L.F.M.; Conte, R.A.; Rodrigues Junior, D. [Universidade de Sao Paulo (EEL/USP), Lorena, SP (Brazil). Escola de Engenharia de Lorena. Dept. de Materiais; Melo, F.C.L. [Centro Tecnico Aeroespacial (AMR/CTA/IAE), Sao Jose dos Campos, SP (Brazil). Instituto de Aeronautica e Espaco. Div. de Materiais

    2009-07-01

    In this work, lithium disilicate glass-ceramics were developed starting of the rice ash- SiO{sub 2} and Li{sub 2}CO{sub 3} powders. The results were compared with glass ceramics based on the lithium disilicate obtained by commercial SiO{sub 2} powders. Glass were melted at 1580 deg C, and annealed at 850 deg C. X-Ray diffraction and scanning electron microscopy were used for characterization of the materials, and hardness and fracture toughness were evaluated using Vickers indentation method. Glasses with amorphous structure were obtained in both materials. After annealing, 'rice-ash' samples presented Li{sub 2}SiO{sub 3} and residual SiO{sub 2} as crystalline phases. On the other side, commercial SiO{sub 2}- Samples presented only Li{sub 2}Si{sub 2}O{sub 5} as crystalline phases and the better results of hardness and fracture toughness. (author)

  7. Composição, proteólise, capacidade de derretimento e formação de "blisters" do queijo mussarela obtido pelos métodos tradicional e de ultrafiltração: composition, proteolysis, melting capacity and blisters formation Mozzarella by ultrafiltration

    Directory of Open Access Journals (Sweden)

    Patrícia D. Pizaia

    2003-12-01

    Full Text Available O objetivo deste trabalho foi comparar a composição, a proteólise, a capacidade de derretimento e a formação de "blisters" (bolhas em queijos tipo Mussarela fabricados com retentado de leite (MR de fator de concentração volumétrica (FCV de 2,34:1, com um queijo Mussarela padrão (MP fabricado com leite não ultrafiltrado. Foi realizado um ensaio de produção com 3 lotes de MR e um lote de MP. Determinou-se a composição do leite, retentado, soro, água de filagem e queijos e a proteólise, a capacidade de derretimento e a formação de "blisters" nos queijos com 7, 15, 30 e 60 dias de armazenamento refrigerado. MRs apresentaram maiores valores de pH e de porcentagem de cinzas e de proteína total e menores porcentagens de acidez titulável, gordura, gordura no extrato seco e sal quando comparadas a MP. Durante o tempo de estocagem, as MRs apresentaram menor proteólise e capacidade de derretimento, em todas as datas analisadas. A porcentagem de área coberta por 'blisters" na pizza e o diâmetro médio dos mesmos foram maiores na MP durante o primeiro mês de estocagem e depois ambos os tipos de queijos apresentaram comportamentos similares para estes 2 parâmetros.The objective of this research was to compare the composition, proteolysis, melting capacity and blisters formation in Mozzarella cheese manufactured with milk retentate (MR of a volumetric concentration factor (FCV of 2.34:1, with a standard Mozzarella cheese (MP manufactured with non ultrafiltrated milk. It was realized one production assay with 3 batches of MRs and one of MP. It was evaluated the milk, retentate, whey, stretching water and cheeses composition and the proteolysis, melting capacity and the blisters formation on cheeses with 7, 15, 30 and 60 days of refrigerates storage. MRs presented larger pH, ash and total protein contents and lower titratable acidity and fat, fat on dry matter and salt contents when compared to MP. Along the storage time the MRs presented lower proteolysis and melting capacity in all the analyzed dates. The pizza area percentage covered by blisters and their average diameters were larger for the MP during the first storage month and thereafter both kinds of cheese presented similar behavior for these two parameters.

  8. Rheological behavior of nanocomposite HMSPP (High Melt Strength Polypropylene) obtained by the addition of clay 'chocolate' organophilizated as reinforcement agent; Comportamento reologico de nanocomposito de HMSPP (Polipropileno com alta resistencia do fundido) obtido pela adicao de argila 'chocolate' organofilizada como agente de reforco

    Energy Technology Data Exchange (ETDEWEB)

    Fermino, D. M.; Valenzuela-Diaz, F.R., E-mail: dmfermino@usp.com.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Escola Politecnica. Dept. de Engenharia Metalurgica e de Materiais; Parra, D. F.; Lugao, A. B. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente

    2012-07-01

    The objective of this study is to obtain a nanocomposite with a bentonite treated in laboratory in comparison to a commercial bentonite and the study of their rheological behavior. The treatment of the sodium clay organophilic in laboratory it was well succeeded as the result of FTIR testing and there was formation of nanocomposites with intercalated clays as XRD assay. In the rheology assay there was increase in a complex viscosity in all of nanocomposite samples of HMSPP. There were small changes in G' module and G″ for nanocomposites. Only with these rheology results we can not say it is interleaved microcomposite or nanocomposite because the criteria of both were not fully met.

  9. Qualidade físico-química e atividades biológicas de caseinofosfopeptídeos obtidos por hidrólise tríptica de caseinato de sódio sob diferentes condições

    Directory of Open Access Journals (Sweden)

    Thais Regina Mezzomo

    2016-07-01

    Full Text Available Muitos métodos têm sido empregados na produção de peptídeos bioativos para a promoção da saúde. O objetivo deste estudo foi produzir caseinofosfopeptídeos por hidrólise tríptica do caseinato de sódio usando diferentes temperaturas (37 e 50 °C e tempos de reação (2 e 4 h, caracterizá-los e analisar sua influência nas atividades citotóxica, antimicrobiana e antioxidante. Caseinofosfopeptídeos foram caracterizados através da composição centesimal, eletroforese em gel de poliacrilamida, Espectrometria de Massas e Cromatografia Líquida de Alta Eficiência. Toxicidade para leucócitos humanos, atividade antimicrobiana utilizando o teste de microdiluição em caldo e determinação da capacidade antioxidante pelo método de espécies reativas ao ácido tiobarbitúrico foram os ensaios biológicos realizados. Os resultados mostraram que as quatro frações peptídicas obtidas apresentaram-se com baixo peso molecular e elevados teores proteico e mineral; quanto ao perfil aminoacídico, apresentaram elevadas e diferenciadas quantidades de ácido glutâmico e serina, que pouco variaram de acordo com o processo de obtenção; não se mostraram tóxicos para leucócitos humanos; demonstraram atividade antimicrobiana para Escherichia coli e Salmonella Enteritidis e elevada capacidade antioxidante. Os resultados físico-químicos das frações de caseinofosfopeptídeos demonstraram elevada composição nutricional em termos de proteína e, principalmente, cálcio. O conjunto de dados indicou que alterações no tempo e na temperatura de reação para a obtenção dos hidrolisados não interferem nas suas qualidades biológicas, mostrando serem seguros para a promoção da saúde e para a aplicação em situações especiais, que envolvem pacientes desnutridos, imunossuprimidos, com comprometimento ósseo ou gastrintestinal decorrentes de inflamações e infecções.PALAVRAS-CHAVE: Caseinofosfopeptídeos. Caseinato de sódio. Citotoxicidade. Atividade antimicrobiana. Atividade antioxidante. ABSTRACTPhysico-chemical quality and biological activities of Casein phosphopeptides obtained by sodium caseinate tryptic hydrolysis under different conditionsSeveral methods have been employed for the production of bioactive peptides for health promotion. The aim of this study was to produce and characterize Casein phosphopeptides obtained by sodium caseinate tryptic hydrolysis under different temperatures (37 and 50 °C and reaction times (2 and 4 h, and evaluate their biological capabilities. They have been characterized by assessing their centesimal composition, by polyacrylamide gel electrophoresis, Mass Spectrometry, and High-Performance Liquid Chromatography. The biological activities tested included toxicity for human leukocytes, antimicrobial assay using the microdilution test, and determination of the antioxidant capacity by the thiobarbituric acid reactive species method. The results showed that the four fractions obtained were of low molecular weight with high protein and mineral contents; their amino acid profile showed high and differentiated amounts of glutamic acid and serine independent of the methodological procedures. The results also showed no toxicity for human peripheral leukocytes, demonstrated antimicrobial activity against Escherichia coli and Salmonella Enteritidis as well as high antioxidant capacity. The results of the physico- chemical Casein phosphopeptides’ fractions showed high nutritional composition in terms of protein and, particularly, calcium. The biological assays indicated that time and temperature changes in the process for obtaining casein hydrolysates have not interfered with their biological qualities. In addition, they have proven safe in promoting health in special conditions involving malnourished and/or, immunocompromised patients or those with bone and/or gastrointestinal impairment due to inflammations and infections.Keywords: Casein phosphopeptides. Sodium caseinate. Cytotoxicity. Antimicrobial activity. Antioxidant activity.

  10. Toxicological evaluation of natural rubber films from vulcanized latex by the conventional process and the alternative process with ionizing radiation; Avaliacao toxicologica de filmes de borracha natural obtidos do latex vulcanizado pelo processo convencional e pelo processo alternativo com radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Vania Elisabeth

    1997-07-01

    The industrial vulcanization of natural rubber latex (NRL) is made all over the world by conventional process using sulphur and heat but it can be made by an alternative process using ionizing radiation. In this research the NRL was tested by 13 physical, chemical and mechanical assays which showed its good quality. It was done a preliminary study of the toxicological properties of 4 natural rubber films obtained by casting process of NRL: one non vulcanized, other vulcanized by the conventional process and two vulcanized by the alternative process. In the alternative process the films were obtained by irradiation of NRL by gamma rays from the {sup 60} Co source at 250 kGy in the absence of sensitizer and irradiated NRL at 12 kGy in the presence of 4ph r of n-butyl acrylate / 0.2 phr of KOH. These vulcanization doses were determined from broken tensile strength. In the conventional process, sulphur vulcanized NRL was made using a classical composition. Another film was made with non vulcanized NRL. The preliminary evaluation of the toxicological properties was made from in vitro cytotoxicity and in vivo systemic toxicity assays. The LBN films vulcanized by the alternative process have less cytotoxicity than the NRL film vulcanized by the conventional process. The sensitized vulcanized films by gamma rays and non vulcanized films showed similar cytotoxicity while the vulcanized films without sensitizer showed a slight lower cytotoxicity. The non vulcanized NRL film and the NRL films vulcanized by the alternative process did not show toxic effects in the 72 hours period of the systemic toxicity assay. However the NRL film vulcanized with sulphur induced effects like allaying and motor in coordination on the animals treated with an oil extract at the fourth hour and recovering after that. The alternative process promoted lower toxic effects than conventional process because there was no toxic substances present. (author)

  11. Comparison between actual and predicted postoperative stair-climbing test, walk test and spirometric values in patients undergoing lung resection Comparação dos testes de escada, caminhada e espirometria preditos com os obtidos no pós-operatório de ressecções pulmonares

    Directory of Open Access Journals (Sweden)

    Marcos Vinícius Cataneo Pancieri

    2010-12-01

    Full Text Available PURPOSE: To assess whether the tests - Forced Expiratory Volume at one second (FEV1, 6-minute walk test (6MWT and stair-climbing test (SCT showed proportional changes after the resection of functioning lung. METHODS: Candidates for pulmonary resection were included. Spirometry, 6MWT and SCT were performed preoperatively (pre and at least 3 months after surgery (pos. SCT was performed on a staircase with a total ascent height of 12.16m. The time taken to climb the total height the fastest possible was defined as stair-climbing time (SCt. Number of functioning segments lost, was used to calculated predicted postoperative (ppo tests values. Pre, ppo and pos values for each test were compared. Data were analyzed by repeated-measure ANOVA with significance level set at 5%. RESULTS: A total of 40 patients were enrolled. Pulmonary resection results ranged from gain of 2 functioning segments to loss of 9. Pre, ppo and pos values were the following: preFEV1 = 2.6±0.8L, ppo FEV1 =2.3±0.8L, and pos FEV1=2.3±0.8L, (pre FEV1 > ppo FEV1 = pos FEV1; pre6MWT = 604±63m, ppo6MWT= 529±103m, pos6MWT= 599±74m (pre6MWT = pos6MWT > ppo6MWT; preSCt = 32.9±7.6s, ppoSCt = 37.8±12.1s, posSCt = 33.7±8.5s (preSCt = posSCt OBJETIVO: Verificar se os testes: Volume Expiratório Forçado no 1º segundo (VEF1, Teste de Caminhada de 6 minutos (TC6 e Teste de Escada (TE se alteram proporcionalmente ao pulmão funcionante ressecado. MÉTODOS: Foram incluídos pacientes candidatos a toracotomia para ressecção pulmonar. No pré-operatório (pré e no mínimo três meses após a cirurgia (pós, realizaram espirometria, TC6 e TE. O TE foi realizado em escada com 12,16m de altura. O tempo para subir todos os degraus o mais rápido possível foi chamado tempo de escada (tTE. Os cálculos dos valores dos testes preditos para o pós-operatório (ppo foram realizados conforme o número de segmentos funcionantes perdidos. Os valores pré, ppo e pós foram comparados entre si para cada teste. Estatística: foi utilizada a análise de variância para medidas repetidas (ANOVA, com significância de 5%. RESULTADOS: Foram estudados 40 pacientes. A ressecção pulmonar variou desde o ganho de dois segmentos funcionantes até a perda de 9. Os valores pré, ppo e pós foram respectivamente: VEF1 -pré = 2,6±0,8L, ppo = 2,3±0,8L, pós = 2,3±0,8L (VEF1pré > VEF1ppo = VEF1pós, TC6-pré = 604±63m, ppo = 529±103m, pós = 599±74m (TC6pré = TC6pós > TC6ppo, tTE-pré = 32,9±7,6s, ppo = 37,8±12,1s, pós = 33,7±8,5s (tTEpré = tTEpós < tTEppo. CONCLUSÃO: Nas ressecções pulmonares, este grupo de pacientes perdeu função pulmonar medida através da espirometria, mas não perdeu a capacidade de exercício, medida através dos testes de escada e caminhada.

  12. Aplicação de análise multivariada aos dados de espectroscopia no infravermelho obtidos na polimerização in situ de adesivo à base de cianoacrilato Multivariate analyses on FT-IR data of polymerization in situ of cyanoacrylate adhesive

    Directory of Open Access Journals (Sweden)

    Francisco A. A. Miranda

    1998-06-01

    Full Text Available A polimerização de adesivo à base de cianoacrilato foi acompanhada por FT-IR durante 30 minutos. A aplicação das técnicas de estatística multivariada (análise de agrupamento hierárquico e a análise dos componentes principais aos espectros de infravermelho, permitiram uma melhor identificação das diferenças espectrais entre monômero e polímero e possibilitou, também, inferir que a quantidade de monômero e do mero no polímero se eqüivalem com seis minutos de polimerização. A técnica de infravermelho mostrou-se uma ferramenta adequada para o acompanhamento da cinética de reação de adesivo à base de cianoacrilato, que torna-se ainda mais eficiente quando associada às técnicas de estatística multivariada.The polymerization of a cyanoacrylate adhesive was accompanied by FT-IR during 30 minutes. The application of multivariate statistics techniques (Hierarchical Clusters Analyses and Principal Components on infrared spectra allowed a better identification of spectral differences between monomer and polymer and also permitted to infer that the quantity of monomer and of mer of the polymer are equal in six minutes polymerization (half-life. The infrared technique appeared as an apropriate tool for observing the kinetics of cyanoacrylate adhesive reaction, which becomes even more efficient when associated to multivariate statistics techniques.

  13. Phenotypic and molecular characterization of isolates of Staphylococcus spp. obtained from sheep milk Chapecó-SCCaracterização fenotípica e molecular de isolados de Staphylococcus spp. obtidos de leite de ovelhas do Município de Chapecó-SC

    Directory of Open Access Journals (Sweden)

    José Francisco Manta Bragança

    2013-03-01

    Full Text Available This study aimed to determine the antimicrobial susceptibility profile and to assess the presence of mechanisms of antimicrobial resistance in Staphylococcus spp. (n=36 isolated from mastitis in sheep’s Chapecó-SC. The potential for biofilm production was determined by phenotypic tests of Congo Red Agar, DAPI and Gentian Violet and by PCR for the detection of icaD gene. To evaluate the antimicrobial resistance testing was performed disk diffusion and detection of resistance genes blaZ, mecA, ermA, ermB and ermC and msrA also performed by PCR.The pump test was conducted by efuxo crop growth Muller Hinton agar containing ethidium bromide. The results showed that 1 (2,78%, 36 (100% and 10 (27,78% isolates were considered to produce a biofilm on Congo Red Agar test, Gentian Violet and DAPI, respectively, while the gene icaD was observed in only 2 (5.55% isolates. The lowest percentage of sensitivity was observed for ampicillin (58.33% and penicillin (58.33%. All strains tested were negative for the mecA, ermA, ermB and ermC genes. However, the isolates were positive for other resistance genes, being the blaZ and the msrA, with percentages of positivity of 58.33% and 11.11% respectively. Only one sample was positive for efflux pump test.O presente trabalho teve como objetivos determinar o perfil de sensibilidade aos antimicrobianos e avaliar a presença de mecanismos de resistência antimicrobiana em Staphylococcus spp. (n=36 isolados de mastite em ovelhas do município de Chapecó-SC. O potencial para produção de biofilme foi determinado pelos testes fenotípicos de Agar Vermelho Congo, DAPI e Violeta de Genciana e por teste molecular pela técnica de PCR para a detecção do gene icaD. Para determinar o perfil de resistência aos antimicrobianos, foi realizado o teste de difusão em disco e detecção dos genes de resistência blaZ, mecA, erm (A, B e C e msrA. O teste da bomba de efuxo foi realizado através do crescimento das culturas em Agar Muller Hinton contendo brometo de etídio. Os resultados mostraram que 1 (2,78%, 36 (100% e 10 (27,78% isolados foram considerados produtores de biofilme pelos testes de Agar Vermelho Congo, DAPI e Violeta de Genciana, respectivamente, enquanto que o gene icaD foi observado em apenas 2 (5,55% isolados. O menor percentual de sensibilidade foi observado para ampicilina (58,33% e penicilina (58,33%. Os isolados avaliados foram positivos para os genes de resistência blaZ (58,33% e msrA (11,11%. Nenhum isolado apresentou os genes de resistência erm (A, B, C e apenas uma amostra foi positiva para o teste da bomba de efluxo.

  14. Lipídios estruturados obtidos a partir da mistura de gordura de frango, sua estearina e triacilgliceróis de cadeia média: II- pontos de amolecimento e fusão Structured lipids from chicken fat, its stearin, and medium chain triacyglycerol blends: II- softening and melting points

    Directory of Open Access Journals (Sweden)

    Ming Chih Chiu

    2008-01-01

    Full Text Available The aim of the present work is to investigate the effects of blending and chemical interesterification reactions on the softening and melting behavior of chicken fat, its stearin and medium chain triacylglycerols, and blends thereof in various ratios. Chemical interesterification is a promising alternative to the current processes of modifying the physical properties of fats. In the experimental design 7 samples corresponding to 7 different blend proportions were used. The results were represented in triangular diagrams. The addition of stearin influenced the softening and melting points. The mixture response surface methodology proved to be an extremely useful tool for the optimization of the fat mixtures.

  15. Comparison among structural characteristics of Ce{sub 1-x}Cu{sub x}O{sub 2} nanocatalysts obtained by two methods of distinct synthesis; Comparacao entre as caracteristicas estruturais dos nanocatalisadores Ce{sub 1-x}Cu{sub x}O{sub 2} obtidos por dois metodos de sintese distintos

    Energy Technology Data Exchange (ETDEWEB)

    Neiva, L.S.; Bispo, A.; Santos, P.T.A.; Costa, A.C.F.M.; Gama, L., E-mail: lucianna@dema.ufcg.edu.b [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Mascarenhas, A.J.S. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil). Inst. de Quimica

    2009-07-01

    The objective this work is to synthesize nano catalysts Ce{sub 1-x}Cu{sub x}O{sub 2} type by the synthesis methods of the combustion reaction and Pechini. The value of the concentration (x) of the element dope (Cu) varies between 0,1 and 0,5 mols. It intends evaluate that form the synthesis method influences in the physical structural characteristics of this material. nano catalysts were characterized by ray- X diffraction. The results showed nano catalysts formation with a formed structure for the most part by the phase CeO{sub 2}, as it was expected, since this is the hostess matrix of the element dope (Cu). Nano catalysts obtained by the method Pechini presents crystallinity larger deg, according with patterns of ray-X. Thus, it was concluded that synthesis employee method the kind in the methodology, as well as the value of the concentration of the element dope has influence on the final structural characteristics of the developed material. (author)

  16. Validação do balanço de radiação obtido a partir de dados MODIS/TERRA na Amazônia com medidas de superfície do LBA Validation of net radiation obtained from MODIS/TERRA data in Amazonia with LBA surface measurements

    Directory of Open Access Journals (Sweden)

    Gabriel de Oliveira

    2013-09-01

    Full Text Available Este estudo tem como objetivo estimar os componentes do balanço de radiação em duas regiões do estado de Rondônia (sudoeste da Amazônia brasileira, a partir de dados do Moderate Resolution Imaging Spectroradiometer (MODIS/TERRA por intermédio do modelo Surface Energy Balance Algorithms for Land (SEBAL, e validar os resultados com informações adquiridas por torres micrometeorológicas do projeto LBA sob as condições de pastagem (Fazenda Nossa Senhora Aparecida e floresta (Reserva Biológica do Jaru. A implementação do modelo SEBAL foi realizada diretamente sobre os dados MODIS e incluiu etapas envolvendo o cômputo de índices de vegetação, albedo e transmitância atmosférica. A comparação das estimativas geradas a partir de dados MODIS com as observações resultou em erros relativos para a condição de pastagem variando entre 0,2 e 19,2%, e para a condição de floresta variando entre 0,8 e 15,6%. A integração de dados em diferentes escalas constituiu uma proposição útil para a estimativa e espacialização dos fluxos de radiação na região amazônica, o que pode contribuir para a melhor compreensão da interação entre a floresta tropical e a atmosfera e gerar informações de entrada necessárias aos modelos de superfície acoplados aos modelos de circulação geral da atmosfera.This study aims to estimate the components of net radiation in two regions located in the state of Rondônia (southwest of the Brazilian Amazon, using Moderate Resolution Imaging Spectroradiometer (MODIS/TERRA data based on Surface Energy Balance Algorithms for Land (SEBAL model, and to validate the results with information acquired by the micrometeorological towers of LBA under the conditions of pasture (Fazenda Nossa Senhora Aparecida and forest (Reserva Biológica do Jaru. Implementation of SEBAL model was performed directly on the MODIS data and included steps involving the computation of vegetation indices, albedo and atmospheric transmittance. Comparison between estimates from MODIS data and the observations showed relative errors for the condition of pasture between 0.2 and 19.2%, and for the condition of forest ranging between 0.8 and 15.6%. The integration of data at different scales was a useful proposition for the estimation and spatialization of the radiation fluxes in the Amazon region, which may contribute to a better understanding of the interaction between Amazon rainforest and atmosphere, and generate input information needed to the surface models coupled to atmospheric general circulation models.

  17. Effect of the [TiO{sub 2}] on the radiation attenuation properties on the human tissue simulator obtained from radiovulcanized natural rubber latex; Efeito da [TiO{sub 2}] nas propriedades de atenuacao da radiacao no simulador de tecido humano obtido do latex de borracha natural radiovulcanizado

    Energy Technology Data Exchange (ETDEWEB)

    Tomimasu, Sumie; Guedes, Selma Matheus Loureiro [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Centro de Tecnologia das Radiacoes]. E-mail: smguedes@net.ipen.br

    2002-07-01

    In this paper was studied the concentration effect of TiO{sub 2} used as filler in the radiation attenuation properties of human tissue simulator obtained from radio vulcanized natural rubber. The studied parameters were the following: the mass stopping power (S{sub mas}), the depth at maximum dose (Z{sub max}), the depth at 50% of maximum dose (R{sub 50}) the radiotherapeutic range (RR{sub 80}) and the electrons range (R). The natural rubber latex was formulated with [n-butyl acrylate ] = e phr and [KOH] = 0,2 phr and radio vulcanized by gamma rays (10 kGy) from {sup 60} Co source. The filler TiO{sub 2} was added (0-16 phr). The natural rubber slabs were obtained by casting method and theirs absorbed dose behavior was studied for each filler concentration using electrons beam (6 MeV) from an accelerator. The results showed that the addition of each phr of filler promoted the decrease of 0.019 cm for Z{sub max}, 0.021 cm for RR{sub 80}, 0.033 cm for R and 0.026 cm for R{sub 50} up to [Ti O{sub 2}] 15 phr. The S{sub mas} increased from 1.72 MeVcm2g-1 to 2.00 MeVcm2g-1 in the filler concentration range of 0-16 phr. The filler must be used in the 12-15 phr range. (author)

  18. Evolução morfométrica dos anexos embrionários e fetais bovinos obtidos por monta natural, com 10 a 70 dias da gestação Biometrics evolution of the embryonic and fetal annexes in cows obtained by natural mating, at 10 to 70 days of gestation

    Directory of Open Access Journals (Sweden)

    Antônio C. de Assis Neto

    2009-10-01

    Full Text Available O período inicial da gestação de bovinos é caracterizado por grandes perdas embrionárias. Considerando a importância deste fator no âmbito da reprodução animal foram estudados os anexos embrionários e fetais bovinos fecundados por monta natural de 15-70 dias de gestação, com o objetivo de estabelecer parâmetros morfométricos da placenta na fase inicial da gestação. Com uso de um paquímetro foram realizadas mensurações do comprimento (crânio caudal, largura (latero lateral e altura (dorso ventral das membranas corioalantóide e amniótica. O início da formação dos cotilédones foi observado e quantificado, assim como, o peso placentário. O peso médio do saco gestacional aumentou com o evoluir da idade gestacional, entretanto, o crescimento foi acelerado a partir de 20-30 dias de gestação. O comprimento crânio caudal e dorso ventral da membrana corioalantóide e do âmnio apresentaram crescimento lento e gradual com o evoluir dos períodos gestacionais analisados. Com 30-40 dias de gestação, os primeiro cotilédones já eram visualizados e contatos com facilidade na superfície coriônica. Os períodos de crescimento coincidiram com os maiores índices de perdas gestacionais em bovinos. Os parâmetros aqui analisados poderão servir para futuras investigações dos anexos embrionários de organismos manipulados em laboratório.The main goal of this morphometrical study was to characterize the development of the extra-embryonic membranes of 15 to 70-day-old bovine embryos obtained by natural mating. With a millimeter paquimeter the cranio-caudal, latero-lateral and dorso-ventral measurements of chorion and amnion were determined. The development of the cotyledons and weight of the gestational sac were observed and quantified. The weight of the gestational sac increased during gestation; however, the growth was faster then 20 to 30 days. The cranial-caudal and dorsal-ventral length of the choriallantois and the amnion developed slowly and gradually with progress of the gestational period, and the cranio-caudal length decreased after 50 to 60 days of gestation, increasing in the next period. After 30 to 40 days of gestation, the first cotyledons were visualized and counted easily in the chorionic surface. The growth periods were the same of the main gestational losses in cattle. The parameters analyzed could be useful for investigations of extra-embryonic membranes in organisms manipulated in the laboratory.

  19. Oocyte activation and preimplantation development of bovine embryos obtained by specific inhibition of cyclin-dependent kinases Ativação oocitária e desenvolvimento pré-implantação de embriões bovinos obtidos com o uso de inibidores específicos das quinases dependentes de ciclina

    Directory of Open Access Journals (Sweden)

    F. Perecin

    2007-04-01

    Full Text Available The efficiency of bohemine and roscovitine in combination with ionomycin on parthenogenetic activation and initial embryonic development of bovine oocytes was studied. Two experiments were performed: in the first, different concentrations (0, 50, 75 or 100µM and different exposure periods (2, 4 or 6 hours to bohemine or roscovitine were tested for activation rates of in vitro matured (IVM bovine oocytes, which were pre-exposed to ionomycin. The best treatments, 75µM bohemine and 50µM roscovitine, both for 6h, were used in the second experiment, in which IVM bovine oocytes were exposed to ionomycin, followed or not by bohemine or roscovitine treatment, and evaluated for nuclear status, activation rate and blastocyst development were assessed. The combined treatments (ionomycin + cyclin-dependent kinases inhibitors - CDKIs showed better results for activation rates (77.3% and initial embryonic development (35.2% than the single ionomycin treatment (69.4% for activation and 21.9% for development; and also lead to a more uniform activation (nearly 90% single pronucleus development. The results showed that CDKIs improve the effects of ionomycin on parthenogenetic activation and blastocyst development in bovine oocytes and could help to achieve more efficient activation protocols, increasing the developmental competence of embryos obtained by reproductive biotechniques.Realizaram-se dois experimentos para avaliar a eficiência da bohemina e roscovitina associadas à ionomicina para ativação partenogenética e desenvolvimento embrionário inicial de bovinos. No primeiro, foram testadas diferentes concentrações (0, 50, 75 ou 100µM e diferentes tempos de exposição (2, 4 ou 6 horas à bohemina ou à roscovitina na ativação de oócitos bovinos maturados in vitro (MIV pré-expostos à ionomicina. Os melhores tratamentos, bohemina 75µM e roscovitina 50µM, ambos por seis horas, foram utilizados no segundo experimento, no qual oócitos bovinos MIV foram expostos à ionomicina seguido ou não pelo tratamento com inibidores específicos das quinases dependentes de ciclina (CDKI, e avaliados quanto à configuração nuclear, taxa de ativação e desenvolvimento até blastocisto. Os tratamentos combinados (ionomicina+CDKI apresentaram melhor taxa de ativação (77,3% e desenvolvimento embrionário inicial (35,2% do que a ionomicina sozinha (69,4% e 21,9%, respectivamente, e também promoveram ativação mais uniforme (aproximadamente 90% de formação de um pronúcleo. Estes resultados demonstram que os CDKIs potencializam o efeito da ionomicina na ativação e desenvolvimento embrionário inicial e podem auxiliar na obtenção de protocolos de ativação mais eficientes, aumentando a capacidade de desenvolvimento de embriões produzidos por meio de biotécnicas reprodutivas.

  20. Características de qualidade do suco polposo de cajá (Spondias lutea L. obtido por extração mecânico-enzimática Quality characteristics of pulpy caja fruit juice (Spondias lutea L. obtained by enzymatic-mechanical extration

    Directory of Open Access Journals (Sweden)

    Antônio de Pádua Valença DA SILVA

    1997-12-01

    Full Text Available Cajás (Spondias lutea L., oriundas do município de Maranguape (CE - Brasil, em estádio de plena maturação foram processadas em escala-piloto para obtenção de suco integral através do processo de extração mecânico-enzimática. O produto final foi analisado com relação as suas características físico-químicas bem quanto ao perfil sensorial após estocagem de 120 dias à temperatura ambiente (28°C. A polpa foi tratada com 120 ppm de enzimas pectinolíticas (Pectinex Ultra SP-L por 30 min, à temperatura de 25°C, o pH natural (2,98, seguido o processo mecânico de extração. Foi empregado como processo de preservação do suco integral o método "hot-fill" + aditivos. Segundo o ponto de vista estatístico as características físico-químicas permaneceram inalteradas ao longo de 120 dias, apresentando os seguintes valores médios: pH (2,78, sólidos solúveis (11,19 °Brix, acidez titulável total (1,46 g% de ácido cítrico, açúcares redutores (6,91 g% em glicose, taninos (77,36 mg% de ácido tânico, cor (0,125 em leitura de absorbância a 440 nm, pectina (0,12 g% em pectato de cálcio e viscosidade (10,8 cps. A análise sensorial classificou o suco polposo como de "boa" e "muito boa", sendo que as maiores médias couberam aos parâmetros aparência, cor e sabor.Caja fruit (Spondias lutea L. from Maranguape (Ceará-Brazil obtained at the full maturity stage were processed at a pilot-scale level with the purpose to obtain pulpy juice through enzymatic-mechanical process. The final product was analysed regarding physical-chemical characteristics as well as in relation to sensorial profile after 120 days of storage at room temperature (28°C. The pulp was treated by 120 ppm of pectinolytics enzymes (Pectinex Ultra SP-L during 30 minutes at 25°C, keeping natural pulp pH (2,98. The "hot-fill " + aditives were used as a preservation process for the pulpy juice. At a statistical point of view physical-chemical characteristics remained without significative alterations, showing average values of pH (2,78, soluble solids (11,19°Brix. total titrable acid (1,46 g% citric acid, reducing sugar (6,91 g% in glicose, tannins (77,36 mg% tanic acid, colour (0,125 in absorbance lecture in 440 nm, pectin (0,12 g% in calcium pectate and viscosity (10,8 cps. The sensorial analysis classified the pulpy juice as " good " and " very good " acceptance, the highest medium values were the appearance, colour and taste parameters.

  1. Isolamento, caracterização e diferenciação de células-tronco mesenquimais do líquido amniótico equino obtido em diferentes idades gestacionais Isolation, characterization and differentiation of mesenchymal stem cells derived from equine amniotic fluid obtained from different gestacional ages

    Directory of Open Access Journals (Sweden)

    Bruna De Vita

    2013-04-01

    Full Text Available O interesse nas pesquisas com células-tronco derivadas de anexos fetais de diversas espécies cresceu exponencialmente nas últimas décadas em virtude de serem fontes de células-tronco adultas com potencial de diferenciação em diversas linhagens celulares que apresentam pouca ou nenhuma imunogenicidade, apresentando-se assim como alternativa de grande importância para a formação de bancos celulares. Apesar do crescente interesse, os estudos para espécie equina ainda são escassos. O objetivo deste trabalho foi isolar, caracterizar e diferenciar células-tronco mesenquimais (CTMs derivadas do líquido amniótico equino obtidas do terço inicial, médio e final da gestação (LA-CTMs, comparando suas características. Foram colhidas 23 amostras de líquido amniótico as quais foram submetidas às análises morfológica, imunocitoquímica, imunofenotípica por citometria de fluxo e às diferenciações osteogênica, adipogênica e condrogênica in vitro. Todas as amostras demonstraram adesão ao plástico e morfologia fibroblastóide. No ensaio imunocitoquímico as células de todos os grupos foram imunomarcadas para CD44, PCNA e vimentina com ausência de marcação para citoqueratina e Oct-4. Na citometria de fluxo observou-se a expressão de CD44 e CD90 e ausência de expressão de CD34, sendo que os marcadores CD44 e CD90 mostraram padrão de expressão decrescente em relação ao desenvolvimento gestacional. As amostras obtidas de todas as fases da gestação foram capazes de diferenciação nas linhagens osteogênica, condrogênica e adipogênica. Portanto, as células obtidas do líquido amniótico apresentaram características morfológicas, imunofenotípicas e potencial de diferenciação típicos das CTMs, demonstrando que a colheita pode ser realizada em qualquer fase gestacional. No entanto, mais pesquisas devem ser realizadas principalmente quanto à expressão de marcadores de pluripotencialidade (como o Oct-4 e ao seu potencial de diferenciação em linhagens extra mesodermais já relatados na literatura.The interest in stem cells derived from fetal annexes of many species has exponentially increased during the last decades, because they are adult stem cell sources with potential of differentiation in several cell lineages; which present little or no immunogenicity and are an alternative with great importance for storage cell banks. Despite the rising interest, studies for the equine species are still rare. The aim of this study was to isolate, characterize and differentiate mesenchymal stem cells derived from equine amniotic fluid obtained from initial, middle and late third of gestation (AF-MSCs, and compare their results. Twenty three samples from equine amniotic fluid were evaluated by morphological, immunocytochemical and immunophenotypical (Flow cytometer assays and osteogenic, adipogenic and chondrogenic in vitro differentiation. All samples demonstrated plastic adhesion and fibroblastoid morphology. The immunocytochemical assay demonstrated cells from all the studied groups were positive for CD44, PCNA and vimentin and negative for cytokeratin and Oct-4. Flow cytometry demonstrated expression of CD44 and CD90 and no expression of CD34, where CD44 and CD90 markers presented decreasing pattern of expression in relation to the gestational development. All samples collected from all gestational phases were capable to differentiate in osteogenic, chondrogenic and adipogenic lineages. Thus, cells obtained from equine amniotic fluid presented morphological and immunophenotypical characteristics and potential of differentiation typical of MSCs showing that the collection can be performed at any stage of pregnancy. However, more studies should be performed about the expression of pluripotent markers as Oct-4 and the differentiation potential for extra mesodermal lineages prior demonstrated in the literature.

  2. Structural and morphological characterization of TiO{sub 2}-ZrO{sub 2} powders obtained by the polymeric precursors method; Caracterizacao estrutural e morfologica de pos de TiO{sub 2}-ZrO{sub 2} obtidos pelo metodo dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, M.A.; Gama, L.; Bispo, A.; Neiva, L.S., E-mail: m_aparecidaribeiro@yahoo.com.b [Universidade Federal de Campina Grande (DEMa/UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Bernardi, M.I.B. [Universidade de Sao Paulo (IFSC/USP), Sao Carlos, SP (Brazil). Inst. de Fisica; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    This work aims to characterize the structure and morphology of TiO{sub 2}-ZrO{sub 2} powders obtained by polymeric precursor method. For this we studied the following compositions: 0.25, 0.5 and 0.75 moles of Zr and calcined at 800 deg C for one hour. The powders obtained were characterized by XRD, SEM and nitrogen adsorption (BET). The analysis of X-ray diffraction showed that the powders had a phase of TiO{sub 2} in the anatase form and a tetragonal phase of ZrO{sub 2}. The crystallite size was between 8, 13 and 11 nm respectively. The analysis of scanning electron microscopy showed the growth of ZrO{sub 2} nanoparticles and that these comprise spherical agglomerates of less than 100 nm. Particle size determined by the BET ranging 28.1-29.5 nm, showing thereby the character of nanosized powders. (author)

  3. Efeito da adição de Na2O na viscosidade e devitrificação do vidro obtido a partir de cinzas volantes e Li2O Influence of Na2O on the viscosity and devitrification behavior of glasses obtained from fly ashes and Li2O

    Directory of Open Access Journals (Sweden)

    Etney Neves

    1998-07-01

    Full Text Available Glass-ceramic materials can be produced by the addition of LiO2 to fly ashes disposible in Southern Brazil. These glass-ceramics are based on the Al2O3-SiO2-Li 2O system. The high viscosity of the obtained glasses, however, makes forming useful articles with these materials difficult. In this study we investigate the effect of adding low cost Na2CO3 on the melt viscosity and on the nature of the developed crystalline phases. It was intended that the ultimate crystalline phase (LiAlSi3O8 should not be altered. With additions up to 3 wt. % Na2CO3, the viscosity was apparently lowered and no new crystalline phase were detected.

  4. Estudos sôbre reservatórios e vectores silvestres do Trypanosoma cruzi. XXIV. Variação dos dados biométricos obtidos em amostras do T. cruzi isolados de casos humanos da Doença de Chagas

    Directory of Open Access Journals (Sweden)

    Francisco Ferriolli Filho

    1968-02-01

    Full Text Available Estudo biométrico de 10 amostras de Trypanosoma cruzi isoladas de casos humanos da doença de CHAGAS, nove mantidas em camundongos brancos jovens e uma mantida em ratos brancos jovens, mostrou a existência de grandes variações amostrais. Assim os valores do comprimento total médio das diferentes amostras variaram entre 16,3μ e 21,8μ., enquanto os valores do índice nuclear médio oscilaram entre 0,93 e 1,52. Êstes resultados ampliam os limites de variações amostrais até agora observadas no T. cruzi, especialmente os que se referem ao índice nuclear médio.

  5. Situação da enfermagem na década de 80: no chão, brotando para os anos 90 - experiências vividas e resultados obtidos na direção de um Hospital Público - UFRJ, "num mundo em crise"

    Directory of Open Access Journals (Sweden)

    Nébia Maria Almeida de Figueiredo

    1989-12-01

    Full Text Available Este trabalho é o resultado da experiência de Implantação de uma proposta inovadora sobre o assistir numa Instituição Pública dirigida por enfermeira, onde se desvenda os caminhos da enfermagem para os anos 90. O marco do trabalho é INTERDISCIPLINAR, num constante FAZER APRENDENDO, cuja administração é LEVE e FLEXÍVEL. A assistência é orientada por Projetos, onde estão contidos Programas que seguem a filosofia da REFORMA SANITÁRIA e está integrada no SISTEMA UNIFICADO DESCENTRALIZADO de SAÚDE.

  6. Fatores de risco e proteção para doenças crônicas não transmissíveis obtidos por inquérito telefônico - VIGITEL Brasil - 2009 Risk and protection factors for chronic non communicable diseases by telephone survey - VIGITEL - 2009

    Directory of Open Access Journals (Sweden)

    Betine Pinto Moehlecke Iser

    2011-09-01

    Full Text Available OBJETIVO: Descrever os fatores de risco e proteção para doenças crônicas não transmissíveis resultantes do Sistema de Vigilância por Inquérito Telefônico (VIGITEL em 2009. METODOLOGIA: Prevalências dos principais fatores de risco e proteção foram estimadas na população >18 anos a partir de entrevistas telefônicas em amostras probabilísticas da população coberta por telefonia fixa nas capitais de estados do Brasil e no Distrito Federal, segundo sexo, faixa etária e escolaridade. RESULTADOS: Foram realizadas 54.367 entrevistas. Fumantes e ex-fumantes corresponderam a 15,5e 22% da população adulta brasileira, respectivamente. O excesso de peso atinge 46,6% dos adultos; 33% relataram consumo de carne com gordura e 18,9% afirmaram consumir bebida alcoólica de forma abusiva. Tais fatores de risco são mais prevalentes em homens e em geral nos indivíduos jovens e de menor escolaridade. A prevalência de atividade física no lazer é de 18,8% (IC95% 17,4-20,1 em homens e de 11,3% (IC95% 10,6-12,0 nas mulheres. A inatividade física atinge 15,6% da população e aumenta com a idade. O consumo de frutas, legumes e verduras e a atividade física no lazer são mais frequentes em homens e mulheres com mais anos de estudo. Diagnóstico de hipertensão arterial foi referido por 21,1% (IC95% 19,6-22,5 dos homens e 27,2% (IC95% 25,8-28,5 das mulheres. A prevalência de diabetes foi de 5,8%. CONCLUSÃO: Os resultados apontaram comportamentos em saúde distintos de acordo com o sexo, idade e escolaridade da população e reforçam a tendência de queda do tabagismo e aumento no excesso de peso no Brasil.OBJECTIVE: To describe the risk and protection factors for non communicable diseases with data from Telephone-based Surveillance of Risk and Protective Factors for Chronic Diseases (VIGITEL in 2009. METHODOLOGY: The prevalence of main risk and protective factors was estimated in adults (>18 years old, by telephone surveys in a probabilistic sample of the population covered by landline telephones in Brazilian state capitals and the Federal District, stratified by gender, age and schooling. RESULTS: Data from 54,367 adults were collected. Smokers and former smokers represented 15.5 and 22% of Brazilian adults, respectively. Excess weight affected 46.6% of adults; 33% reported the consumption of meat with visible fat and reported 18.9% alcohol abuse. These factors were more prevalent among men and, in general, young adults and people with low schooling. The prevalence of physical activity in leisure was 18.8% (95%CI 17.4-20.1 among men and 11.3% (95%CI 10.6-12.0 among women. Physical inactivity affected 15.6% of population and increased with age. Consumption of fruits and vegetables and physical activity in leisure time were more prevalent in men and women with 12 years of schooling or more. Hypertension diagnosis was reported by 21.1% (95%CI 19.6-22.5 of men, and 27.2% (95%CI 25.8-28.5 of women. Prevalence of diabetes was 5.8%. CONCLUSION: The results point to different health behavior according to gender, age and schooling of the population and reinforce the decreasing smoking trend and increasing overweight trend in Brazil.

  7. Influência das condições reacionais nas características de copolímeros de metacrilato de metila e divinilbenzeno obtidos por polimerização em suspensão Influence from the reaction conditions on the characteristics of methyl methacrylate-divinylbenzene copolymers obtained by suspension polymerization

    Directory of Open Access Journals (Sweden)

    Anelise M. Cardoso

    2004-09-01

    Full Text Available Foram sintetizados copolímeros esféricos e porosos à base de metacrilato de metila e divinilbenzeno através de polimerização em suspensão aquosa utilizando metil-etil-cetona (MEK e ciclo-hexano (CH como diluentes. Diferentes estruturas morfológicas foram obtidas através da modificação dos parâmetros reacionais tais como teor de divinilbenzeno e razão MEK/CH. Os copolímeros foram caracterizados por porosimetria de mercúrio, análise de área específica, densidade aparente e microscopia ótica. Foram obtidas estruturas macroporosas com os teores mais altos do DVB e do diluente não-solvatante (CH.Spherical and porous copolymers based on methyl methacrylate and divinylbenzene were synthesized by aqueous suspension polymerization using methyl-ethyl-ketone (MEK and cyclohexane (CH as diluents. Different morphological structures were obtained by modifying the reaction parameters, such as divinylbenzene content and MEK/CH ratio. The copolymers were characterized by several techniques: mercury porosimetry, specific superficial area analyzer, apparent density and optical microcopy. Macroporous structures were obtained when using high content of DVB and of nonsolvatant diluent (CH.

  8. The effect of surfactant addition on high-energy milling upon the magnetic properties and microstructure of the Pr-Fe-B HDDR magnetic powders; Efeito da adicao de surfactantes nas propriedades e microestrutura de pos magneticos a base de Pr-Fe-B obtidos via HDDR e moagem de alta energia

    Energy Technology Data Exchange (ETDEWEB)

    Santos, P.B.; Silva, S.C.; Faria, R.N.; Takiishia, H., E-mail: pbsantos@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2010-07-01

    Nanomagnetic powders based on the composition Pr{sub 12}Fe{sub 65.9}Co{sub 16}B{sub 6}Nb{sub 0.1} have been obtained from using (a) the hydrogenation, disproportionation, desorption and recombination (HDDR) process; (b) by varying of milling time and (c) with the addition of an oleic acid as a surfactant. The latter has been used to enhance milling condition by preventing the agglomeration of particles and hence to improve the intrinsic coercivity of the material. High-energy mechanical milling has been used to yield magnetic nanoparticles. Powders were characterized magnetically using vibrating sample magnetometer (VSM) and microstructurally by Scanning Electron Microscopy (SEM), Field Emission Gun SEM (FEG-SEM) and X-ray diffraction. (author)

  9. Supressão das anomalias de fase e batimentos laterais em espectros de RMN 13c obtidos com a sequência de precessão livre no estado estacionário Suppression of phase anomalies and sidebands on 13c NMR spectra obtained with the steady-state free precession sequence

    Directory of Open Access Journals (Sweden)

    Poliana Macedo dos Santos

    2010-01-01

    Full Text Available The Steady-State Free Precession (SSFP sequence has been widely used in low-field and low-resolution imaging NMR experiments to increase the signal-to-noise ratio (s/n of the signals. Here, we analyzed the Scrambled Steady State - SSS and Unscrambled Steady State - USS sequences to suppress phase anomalies and sidebands of the 13C NMR spectrum acquired in the SSFP regime. The results showed that the application of the USS sequence allowed a uniform distribution of the time interval between pulses (Tp, in the established time range, allowing a greater suppression of phase anomalies and sidebands, when compared with the SSS sequence.

  10. Avaliação de biocombustível derivado do bio-óleo obtido por pirólise rápida de biomassa lignocelulósica como aditivo para gasolina Evaluation of biofuel derived from lignocellulosic biomass fast pyrolysis bio-oil for use as gasoline addictive

    Directory of Open Access Journals (Sweden)

    Carmen Luisa Barbosa Guedes

    2010-01-01

    Full Text Available A biofuel was prepared from acid aqueous fraction (pH = 2 of bio-oil produced by fast pyrolysis (Bioware Technology of lignocellulosic biomass (sugar cane residue and tested in blends (2, 5, 10 e 20% v/v with gasoline type C (common marketed in Brazil. The specification tests made in the Refinery President Getúlio Vargas (PETROBRAS showed increasing in the octane number (MON and antiknock index (AKI with reduction in the residue generation during the combustion. The physicochemical characteristics of the biofuel were similar that combustible alcohol allowing its use as gasoline additive.

  11. Electromagnetic attenuation analysis of Ni{sub 0.4}Zn{sub 0.6}Fe{sub 2O4} obtained by citrate precursor method; Analise da atenuacao de radiacao eletromagnetica de Ni{sub 0.4}Zn{sub 0.6}Fe{sub 2O4} obtido pelo metodo de citrato precursor

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, K. [Centro Tecnico Aeroespacial (CTA-IAE), Sao Jose dos Campos, SP (Brazil). Inst. de Atividades Espaciais. Div. Materiais; Moura, A.E.G.; Nasar, R.S.; Nasar, M.C. [Universidade Federal do Rio Grande do Norte (UFRN), Natal (Brazil). Dept. de Quimica; Pereira, J.J. [Universidade de Taubate, SP (Brazil)

    2010-07-01

    In this work, two types of synthesized Ni{sub 0,4}Zn{sub 0,6}Fe{sub 2}O{sub 4} by citrate precursor method. The first type was calcined at 350 deg C for 3.5 h, and the second, after calcination, it was subjected to heat treatment at 600 deg C for 2h in argon atmosphere. Both types were analyzed by X-ray diffraction (XRD) and equipment waveguide. The data were investigated by Rietveld refinement method and showed the NiZn ferrite phase with crystallite size of 12.2 +- 0.1 nm (350 deg C) and 166.7 +- 3.6 nm (600 deg C). The heat treatment also influenced the values of electric permittivity and magnetic permeability, and attenuation of electromagnetic radiation in the frequency range in microwave (8-12 GHz). The sample treated attenuates more and allows its application with thinner, making it attractive its use as absorber material in this frequency range. (author)

  12. Analise térmica e microscópica de laminados biodegradáveis obtidos a partir de farinha de mandioca, sorbitol e poli (butileno adipato co-tereftalato PBAT. Thermal and microscopic analysis of biodegradable laminates made from cassava flour, sorbitol and poly (butylene adipate-co-terephthalate PBAT - doi: 10.4025/actascitechnol.v35i4.13183

    Directory of Open Access Journals (Sweden)

    Henrique Tirolli Rett

    2013-10-01

    Full Text Available O objetivo deste trabalho foi desenvolver blendas de materiais laminados biodegradáveis, utilizando farinha de mandioca como fonte de amido, fibras naturais, sorbitol como plastificante e PBAT. Primeiro obteve-se peletes de três formulações diferentes e a partir destes, utilizou-se a termoprensagem a alta temperatura como alternativa na formação dos laminados. A caracterização foi feita através de microscopia eletrônica de varredura (MEV e calorimetria diferencia de varredura (CDV. A quantidade se sorbitol que melhor se ajustou à extrusão foi a de 15% (peso/peso; a formulação do laminado mais homogêneo, observada pela microscopia, foi de 55:40:15 (farinha/sorbitol/PBAT. As fibras ficaram dispersas por toda a superfície nos três tratamentos estudados, porém, por dentre eles, observaram-se zonas dispersas das fibras. Conforme se aumentou o teor de farinha, houve aumento no ponto de fusão dos laminados em comparação ao PBAT puro.Blends of biodegradable laminated materials were developed using cassava flour as starch and natural fibers source, sorbitol as a plasticizer and PBAT as a biodegradable polyester. After obtaining pellets from three different formulations, high temperature thermopressure was used to form laminates. The characterization was performed by scanning electron microscopy (SEM and by differential scanning calorimetry (DSC. The amount of sorbitol for the best extrusion process was 15% (weight/weight and the formulation of the best homogeneity observed by microscopy was 55:40:15 (flour/sorbitol/PBAT. Although fibers were dispersed throughout the surface in the three treatments, scattered areas of fibers could be found among them. As rates of flour increased, an increase in the melting point of the laminates occurred when compared to pure PBAT.  

  13. Identificación de defensas inducibles a áfidos en cebadas pre-comerciales

    OpenAIRE

    Caridad, Alejandro; Saldúa, Vilma Luciana; Castro, Ana María

    2018-01-01

    Las plantas tienen la capacidad de adaptarse a situaciones de estrés mediante la expresión de genes implicados en mecanismos de defensa, que pueden ser constitutivos o inducibles, dependiendo si se expresan permanentemente o no. Detrás de la regulación de estos mecanismos se encuentran las hormonas, moléculas señalizadoras que comunican los distintos tejidos de la planta entre sí. Ante el ataque de insectos, el Acido Jasmónico (AJ) y el Acido Salicílico (AS) juegan un papel preponderante en l...

  14. POLYETHYLENEIMINE (PEI ON SILICA AS CATALYST IN KNOEVENAGEL AND MICHAEL REACTIONS

    Directory of Open Access Journals (Sweden)

    FATIHA ZAOUI

    2017-03-01

    Full Text Available After the synthesis of polyethylenimine supported on silica, it has been used as a new and efficient catalyst in Knoevenagel and Michael condensations. The presence of the polyethylenimine in the catalytic system together with silica displays an acido-basic character allows a better catalytic activity in the condensations. Carried out under microwave irradiation, without organic solvent and during short time, the syntheses are respectful towards green chemistry. The solid catalyst can be easily reused. This catalyst has the acido-basic character at the same time.

  15. A method for the determination of ascorbic acid using the iron(II)-pyridine-dimethylglyoxime complex

    Energy Technology Data Exchange (ETDEWEB)

    Arya, S. P.; Mahajan, M. [Haryana, Kurukshetra Univ. (India). Dept. of Chemistry

    1998-05-01

    A simple and rapid spectrophotometric method for the determination of ascorbic acid is proposed. Ascorbic acid reduces iron (III) to iron (II) which forms a red colored complex with dimethylglyoxime in the presence of pyridine. The absorbance of the resulting solution is measured at 514 nm and a linear relationship between absorbance and concentration of ascorbic acid is observed up to 14 {mu}g ml{sup -1}. Studies on the interference of substances usually associated with ascorbic acid have been carried out and the applicability of the method has been tested by analysing pharmaceutical preparations of vitamin C. [Italiano] Si propone un rapido e semplice metodo spettrofotometrico per la determinazione dell`acido ascorbico. L`acido ascorbico riduce il ferro(III) a ferro(II) che forma con la dimetilgliossima, in presenza di piridina, un complesso colorato in rosso. L`assorbanza della soluzione risultante e` misurata a