Fog computing job scheduling optimization based on bees swarm

Science.gov (United States)

Bitam, Salim; Zeadally, Sherali; Mellouk, Abdelhamid

2018-04-01

Fog computing is a new computing architecture, composed of a set of near-user edge devices called fog nodes, which collaborate together in order to perform computational services such as running applications, storing an important amount of data, and transmitting messages. Fog computing extends cloud computing by deploying digital resources at the premise of mobile users. In this new paradigm, management and operating functions, such as job scheduling aim at providing high-performance, cost-effective services requested by mobile users and executed by fog nodes. We propose a new bio-inspired optimization approach called Bees Life Algorithm (BLA) aimed at addressing the job scheduling problem in the fog computing environment. Our proposed approach is based on the optimized distribution of a set of tasks among all the fog computing nodes. The objective is to find an optimal tradeoff between CPU execution time and allocated memory required by fog computing services established by mobile users. Our empirical performance evaluation results demonstrate that the proposal outperforms the traditional particle swarm optimization and genetic algorithm in terms of CPU execution time and allocated memory.

The virucidal effects against murine norovirus and feline calicivirus F4 as surrogates for human norovirus by the different additive concentrations of ethanol-based sanitizers.

Science.gov (United States)

Akasaka, Tempei; Shimizu-Onda, Yuko; Hayakawa, Satoshi; Ushijima, Hiroshi

2016-03-01

Since human norovirus is non-cultivable, murine norovirus and feline calicivirus have been used as surrogates. In this study, the virucidal effects of ethanol-based sanitizers with different concentrations of additives (malic acid/sodium malate, glycerin-fatty acid ester) against murine norovirus and feline calicivirus F4 were examined. The ethanol-based sanitizers at pH 7 showed sufficient virucidal effects, but glycerin-fatty acid ester included in ethanol-based sanitizers at pH 4 or 6 reduced the virucidal effects against murine norovirus. The ethanol-based sanitizers containing malic acid/sodium malate inactivated feline calicivirus F4 in shorter time, but there is no difference between ethanol-based sanitizers with and without glycerin-fatty acid ester. Traditionally, feline calicivirus has been used for long time as a surrogate virus for human norovirus. However, this study suggested that murine norovirus and feline calicivirus F4 had different sensitivity with the additive components of ethanol-based sanitizers. Therefore, using feline calicivirus alone as a surrogate for human norovirus may not be sufficient to evaluate the virucidal effect of sanitizers on food-borne infections caused by human norovirus. Sanitizers having virucidal effects against at least both murine norovirus and feline calicivirus may be more suitable to inactivate human norovirus. Copyright © 2015. Published by Elsevier Ltd.

Fog chemistry in the Texas-Louisiana Gulf Coast corridor

Science.gov (United States)

Raja, Suresh; Raghunathan, Ravikrishna; Yu, Xiao-Ying; Lee, Taehyoung; Chen, Jing; Kommalapati, Raghava R.; Murugesan, Karthik; Shen, Xinhua; Qingzhong, Yuan; Valsaraj, Kalliat T.; Collett, Jeffrey L.

Fog samples were collected in two population centers of the US Gulf Coast (Houston, Texas and Baton Rouge, Louisiana) using Caltech active strand cloud collectors. A total of 32 fogwater samples were collected in Baton Rouge (November 2004-February 2005) and Houston (February 2006). These samples were analyzed for pH, total and dissolved organic carbon, major inorganic ions, and a variety of organic compounds including organic acids, aromatics, carbonyls, and linear alkanes. Fogs in both environments were of moderate density, with typical fog liquid water contents <100 mg m -3. Fog samples collected in Houston reflect a clear influence of marine and anthropogenic inputs, while Baton Rouge samples also reflect agricultural inputs. The volume-weighted mean fog pH was somewhat more acidic (˜4.3) in Houston than in Baton Rouge (˜5.0). A wide pH range was observed in fog at both locations. Houston fog had higher concentrations of Cl -, NO 3-, Na +, Mg 2+, and Ca 2+. Sulfate to nitrate ratios were high in fogs at both locations, typical of many clouds in the eastern US. Total organic carbon concentrations were much higher in Houston fogs than in Baton Rouge fogs. Efforts to speciate dissolved organic carbon (DOC) reveal large contributions from organic acids and carbonyls, with smaller contributions from other organic compound families including aromatics, alkanes, amides, and alcohols. Approximately 40% of the fog DOC was unspeciated in samples from both study locations.

Analysis and scavenging effect of acid fog. Sanseimu no kagaku sosei to senjo koka

Energy Technology Data Exchange (ETDEWEB)

Igawa, M.; Hoka, E.; Hosono, T.; Iwase, K.; Nagashima, T. (Kanagawa University, Yokohama (Japan). Faculty of Engineering)

1991-05-10

Fog samples were collected for analysis at Mt. Ohyama, the east edge of Tanzawa Mountains in the southwest of Kanto plains. Then, rainwater and aerosol that becomes the core of droplet were analyzed and measured values were compared. As a result, the pH value of the fog samples for 2 years from 1988 to 1990 ranged between 2.6 and 7.0, and the mean pH value was 3.95. According to the measurement of major component concentration of fogwater, rainwater, and aerosol, it was found that concentration of fogwater changed significantly depending on the day but every ion concentration was higher than that of rainwater. The equivalent concentration ratio of sulfuric acid, nitric acid, and chloride ions were almost equal. The concentration value of fogwater varied a lot with the course of time and became higher during the formation and the dissipation of fog. Through the analysis of such changes, atmospheric scavenging effect of precipitation of fogwater upon the trees and the earth surface was observed. It means that pollutants with high concentration were loaded on the plants and the earth surface. 23 refs., 5 figs., 2 tabs.

Salt Fog Testing Iron-Based Amorphous Alloys

International Nuclear Information System (INIS)

Rebak, Raul B.; Aprigliano, Louis F.; Day, S. Daniel; Farmer, Joseph C.

2007-01-01

Iron-based amorphous alloys are hard and highly corrosion resistant, which make them desirable for salt water and other applications. These alloys can be produced as powder and can be deposited as coatings on any surface that needs to be protected from the environment. It was of interest to examine the behavior of these amorphous alloys in the standard salt-fog testing ASTM B 117. Three different amorphous coating compositions were deposited on 316L SS coupons and exposed for many cycles of the salt fog test. Other common engineering alloys such as 1018 carbon steel, 316L SS and Hastelloy C-22 were also tested together with the amorphous coatings. Results show that amorphous coatings are resistant to rusting in salt fog. Partial devitrification may be responsible for isolated rust spots in one of the coatings. (authors)

Paper-based plasma sanitizers.

Science.gov (United States)

Xie, Jingjin; Chen, Qiang; Suresh, Poornima; Roy, Subrata; White, James F; Mazzeo, Aaron D

2017-05-16

This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nW⋅cm -2 ⋅nm -1 ), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like "stretchy" structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

Fog Density Estimation and Image Defogging Based on Surrogate Modeling for Optical Depth.

Science.gov (United States)

Jiang, Yutong; Sun, Changming; Zhao, Yu; Yang, Li

2017-05-03

In order to estimate fog density correctly and to remove fog from foggy images appropriately, a surrogate model for optical depth is presented in this paper. We comprehensively investigate various fog-relevant features and propose a novel feature based on the hue, saturation, and value color space which correlate well with the perception of fog density. We use a surrogate-based method to learn a refined polynomial regression model for optical depth with informative fog-relevant features such as dark-channel, saturation-value, and chroma which are selected on the basis of sensitivity analysis. Based on the obtained accurate surrogate model for optical depth, an effective method for fog density estimation and image defogging is proposed. The effectiveness of our proposed method is verified quantitatively and qualitatively by the experimental results on both synthetic and real-world foggy images.

Demonstration of measuring sea fog with an SNSPD-based Lidar system.

Science.gov (United States)

Zhu, Jiang; Chen, Yajun; Zhang, Labao; Jia, Xiaoqing; Feng, Zhijun; Wu, Ganhua; Yan, Xiachao; Zhai, Jiquan; Wu, Yang; Chen, Qi; Zhou, Xiaoying; Wang, Zhizhong; Zhang, Chi; Kang, Lin; Chen, Jian; Wu, Peiheng

2017-11-08

The monitor of sea fogs become more important with the rapid development of marine activities. Remote sensing through laser is an effective tool for monitoring sea fogs, but still challengeable for large distance. We demonstrated a Long-distance Lidar for sea fog with superconducting nanowire single-photon detector (SNSPD), which extended the ranging area to a 180-km diameter area. The system, which was verified by using a benchmark distance measurement of a known island, is applied to the Mie scattering weather prediction Lidar system. The fog echo signal distribution in the range of 42.3∼63.5 km and 53.2∼74.2 km was obtained by the Lidar system. Then the fog concentration and the velocity of the fog were deduced from the distribution, which is consistent with the weather prediction. The height of the sea fog is about two hundred meter while the visibility at this height is about 90 km due to the Earth's radius of curvature. Therefore, the capability of this SNSPD-based Lidar was close to the theoretical limit for sea fog measurements for extremely high signal-to-noise ratio of SNSPD.

Multirule Based Diagnostic Approach for the Fog Predictions Using WRF Modelling Tool

Directory of Open Access Journals (Sweden)

Swagata Payra

2014-01-01

Full Text Available The prediction of fog onset remains difficult despite the progress in numerical weather prediction. It is a complex process and requires adequate representation of the local perturbations in weather prediction models. It mainly depends upon microphysical and mesoscale processes that act within the boundary layer. This study utilizes a multirule based diagnostic (MRD approach using postprocessing of the model simulations for fog predictions. The empiricism involved in this approach is mainly to bridge the gap between mesoscale and microscale variables, which are related to mechanism of the fog formation. Fog occurrence is a common phenomenon during winter season over Delhi, India, with the passage of the western disturbances across northwestern part of the country accompanied with significant amount of moisture. This study implements the above cited approach for the prediction of occurrences of fog and its onset time over Delhi. For this purpose, a high resolution weather research and forecasting (WRF model is used for fog simulations. The study involves depiction of model validation and postprocessing of the model simulations for MRD approach and its subsequent application to fog predictions. Through this approach model identified foggy and nonfoggy days successfully 94% of the time. Further, the onset of fog events is well captured within an accuracy of 30–90 minutes. This study demonstrates that the multirule based postprocessing approach is a useful and highly promising tool in improving the fog predictions.

Factors that influence properties of FOG deposits and their formation in sewer collection systems.

Science.gov (United States)

Iasmin, Mahbuba; Dean, Lisa O; Lappi, Simon E; Ducoste, Joel J

2014-02-01

Understanding the formation of Fat, Oil, and Grease (FOG) deposits in sewer systems is critical to the sustainability of sewer collection systems since they have been implicated in causing sewerage blockages that leads to sanitary sewer overflows (SSOs). Recently, FOG deposits in sewer systems displayed strong similarities with calcium-based fatty acid salts as a result of a saponification reaction. The objective of this study was to quantify the factors that may affect the formation of FOG deposits and their chemical and rheological properties. These factors included the types of fats used in FSEs, environmental conditions (i.e. pH and temperature), and the source of calcium in sewer systems. The results of this study showed that calcium content in the calcium based salts seemed to depend on the solubility limit of the calcium source and influenced by pH and temperature conditions. The fatty acid profile of the calcium-based fatty acid salts produced under alkali driven hydrolysis were identical to the profile of the fat source and did not match the profile of field FOG deposits, which displayed a high fraction of palmitic, a long chain saturated fatty acid. It is hypothesized that selective microbial metabolism of fats and/or biologically induced hydrogenation may contribute to the FOG deposit makeup in sewer system. Therefore, selective removal of palmitic in pretreatment processes may be necessary prior to the discharge of FSE wastes into the sewer collection system. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Secure and Privacy-Preserving Navigation Scheme Using Spatial Crowdsourcing in Fog-Based VANETs

Science.gov (United States)

Wang, Lingling; Liu, Guozhu; Sun, Lijun

2017-01-01

Fog-based VANETs (Vehicular ad hoc networks) is a new paradigm of vehicular ad hoc networks with the advantages of both vehicular cloud and fog computing. Real-time navigation schemes based on fog-based VANETs can promote the scheme performance efficiently. In this paper, we propose a secure and privacy-preserving navigation scheme by using vehicular spatial crowdsourcing based on fog-based VANETs. Fog nodes are used to generate and release the crowdsourcing tasks, and cooperatively find the optimal route according to the real-time traffic information collected by vehicles in their coverage areas. Meanwhile, the vehicle performing the crowdsourcing task can get a reasonable reward. The querying vehicle can retrieve the navigation results from each fog node successively when entering its coverage area, and follow the optimal route to the next fog node until it reaches the desired destination. Our scheme fulfills the security and privacy requirements of authentication, confidentiality and conditional privacy preservation. Some cryptographic primitives, including the Elgamal encryption algorithm, AES, randomized anonymous credentials and group signatures, are adopted to achieve this goal. Finally, we analyze the security and the efficiency of the proposed scheme. PMID:28338620

A Secure and Privacy-Preserving Navigation Scheme Using Spatial Crowdsourcing in Fog-Based VANETs.

Science.gov (United States)

Wang, Lingling; Liu, Guozhu; Sun, Lijun

2017-03-24

Fog-based VANETs (Vehicular ad hoc networks) is a new paradigm of vehicular ad hoc networks with the advantages of both vehicular cloud and fog computing. Real-time navigation schemes based on fog-based VANETs can promote the scheme performance efficiently. In this paper, we propose a secure and privacy-preserving navigation scheme by using vehicular spatial crowdsourcing based on fog-based VANETs. Fog nodes are used to generate and release the crowdsourcing tasks, and cooperatively find the optimal route according to the real-time traffic information collected by vehicles in their coverage areas. Meanwhile, the vehicle performing the crowdsourcing task can get a reasonable reward. The querying vehicle can retrieve the navigation results from each fog node successively when entering its coverage area, and follow the optimal route to the next fog node until it reaches the desired destination. Our scheme fulfills the security and privacy requirements of authentication, confidentiality and conditional privacy preservation. Some cryptographic primitives, including the Elgamal encryption algorithm, AES, randomized anonymous credentials and group signatures, are adopted to achieve this goal. Finally, we analyze the security and the efficiency of the proposed scheme.

Machine learning based Intelligent cognitive network using fog computing

Science.gov (United States)

Lu, Jingyang; Li, Lun; Chen, Genshe; Shen, Dan; Pham, Khanh; Blasch, Erik

2017-05-01

In this paper, a Cognitive Radio Network (CRN) based on artificial intelligence is proposed to distribute the limited radio spectrum resources more efficiently. The CRN framework can analyze the time-sensitive signal data close to the signal source using fog computing with different types of machine learning techniques. Depending on the computational capabilities of the fog nodes, different features and machine learning techniques are chosen to optimize spectrum allocation. Also, the computing nodes send the periodic signal summary which is much smaller than the original signal to the cloud so that the overall system spectrum source allocation strategies are dynamically updated. Applying fog computing, the system is more adaptive to the local environment and robust to spectrum changes. As most of the signal data is processed at the fog level, it further strengthens the system security by reducing the communication burden of the communications network.

Characterization of micro-organisms isolated from dairy industry after cleaning and fogging disinfection with alkyl amine and peracetic acid.

Science.gov (United States)

Bore, E; Langsrud, S

2005-01-01

To characterize micro-organisms isolated from Norwegian dairy production plants after cleaning and fogging disinfection with alkyl amine/peracetic acid and to indicate reasons for survival. Microbial samples were collected from five dairy plants after cleaning and fogging disinfection. Isolates from two of these production plants, which used fogging with alkylamino acetate (plant A), and peracetic acid (plant B), were chosen for further characterization. The sequence of the 16S ribosomal DNA, fatty acid analysis and biochemical characteristics were used to identify isolates. Three isolates identified as Rhodococcus erythropolis, Methylobacterium rhodesianum and Rhodotorula mucilaginosa were isolated from plant A and one Sphingomonas sp. and two M. extorquens from plant B. Different patterns of resistance to seven disinfectants in a bactericidal suspension test and variable degree of attachment to stainless steel were found. The strains with higher disinfectant resistance showed lower degree of attachment than susceptible strains. The study identifies and characterizes micro-organisms present after cleaning and fogging disinfection. Both surface attachment and resistance were shown as possible reasons for the presence of the isolates after cleaning and disinfection. These results contribute to the awareness of disinfectant resistance as well as attachment as mechanisms of survival in dairy industry. It also strengthens the argument of frequent alternation of disinfectants in the food processing industry to avoid the establishment of resistant house strains.

A method of detecting sea fogs using CALIOP data and its application to improve MODIS-based sea fog detection

International Nuclear Information System (INIS)

Wu, Dong; Lu, Bo; Zhang, Tianche; Yan, Fengqi

2015-01-01

A method to detect sea fogs from the measurement data acquired by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) aboard the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite is proposed in this paper. Because of the unique capability of vertical-resolved measurements, sea fogs and low clouds can be more easily distinguished in the CALIOP data compared with passive satellite measurements. Yellow Sea where sea fogs occur frequently is selected to test the method. Nine cases of daytime sea fog events from 2008 to 2011 in the Yellow Sea are studied intensively to characterize the remotely sensed radiation properties of various targets, such as clear-sky sea surface, sea fog, low cloud and high cloud. These fog cases are then used in an attempt to evaluate sea fogs identified from the MODIS measurements. The method proposed in this paper can also be used for nighttime cases. Multi-year sea fog dataset can be made from the CALIOP measurement and used to validate the MODIS sea fog detection. - Highlights: • A method of sea fog detection from the CALIOP measurements is proposed. • CALIOP VFM and 532-nm attenuated backscatter products are integrated used. • Sea fogs and low clouds can be more easily distinguished in the CALIOP data. • 9 Cases of daytime sea fog events in the Yellow Sea are selected to test the method. • The MODIS sea fog detections are evaluated using the collocated CALIOP data

An automated fog monitoring system for the Indo-Gangetic Plains based on satellite measurements

Science.gov (United States)

Patil, Dinesh; Chourey, Reema; Rizvi, Sarwar; Singh, Manoj; Gautam, Ritesh

2016-05-01

Fog is a meteorological phenomenon that causes reduction in regional visibility and affects air quality, thus leading to various societal and economic implications, especially disrupting air and rail transportation. The persistent and widespread winter fog impacts the entire the Indo-Gangetic Plains (IGP), as frequently observed in satellite imagery. The IGP is a densely populated region in south Asia, inhabiting about 1/6th of the world's population, with a strong upward pollution trend. In this study, we have used multi-spectral radiances and aerosol/cloud retrievals from Terra/Aqua MODIS data for developing an automated web-based fog monitoring system over the IGP. Using our previous and existing methodologies, and ongoing algorithm development for the detection of fog and retrieval of associated microphysical properties (e.g. fog droplet effective radius), we characterize the widespread fog detection during both daytime and nighttime. Specifically, for the night time fog detection, the algorithm employs a satellite-based bi-spectral brightness temperature difference technique between two spectral channels: MODIS band-22 (3.9μm) and band-31 (10.75μm). Further, we are extending our algorithm development to geostationary satellites, for providing continuous monitoring of the spatial-temporal variation of fog. We anticipate that the ongoing and future development of a fog monitoring system would be of assistance to air, rail and vehicular transportation management, as well as for dissemination of fog information to government agencies and general public. The outputs of fog detection algorithm and related aerosol/cloud parameters are operationally disseminated via http://fogsouthasia.com/.

Uptake and distribution of nitrogen from acidic fog within a ponderosa pine (Pinus ponderosa Laws.)/litter/soil system

Energy Technology Data Exchange (ETDEWEB)

Fenn, M.E.; Leininger, T.D.

1995-11-01

The magnitude and importance of wet deposition of N in forests of the South Coast (Los Angeles) Air Basin have not been well characterized. We exposed 3-yr-old ponderosa pine (Pinus ponderosa Laws.) seedlings growing in native forest soil to acidic fog treatments (pH 3.1) simulating fog chemistry from a pine forest near Los Angeles, California. Fog solutions contained either {sup 15}NH{sub 4}{sup +}, {sup 15}NO{sub 3}{sup {minus}}, or unlabeled N. The fog treatments were applied in open-top chambers in six 5-hr exposures. Soil treatments within each of the fog exposures were bare soil, soil overlain with L- and F-litter, and soil covered with plastic during the fog events to prevent fogwater from contacting soil. Seedlings were harvested and samples were collected 15 wk after the fog treatments. Uptake of {sup 15}N by roots was by far the dominant pathway for plant assimilation of fog-deposited {sup 15}N. Deposition of N in fog supplied 9.4% and 8.7% of the total N in current-year crown biomass in the litter-overlay and bare-soil treatments, respectively. Total N concentrations in every plant fraction except current-year stems were significantly higher in the bare-soil treatment than in the plastic-covered soil treatment. Less than 5% of the {sup 15}N deposited directly to the seedling crowns was retained by the plants in the covered-soil treatment, whereas 57% of the {sup 15}N deposited to the seedling/litter/soil systems was incorporated into plant biomass. The litter layers retained {sup 15}NH{sub 4}{sup +} more effectively than {sup 15}NH{sub 4}{sup +} more effectively than {sup 15}NO{sub 3}. Data from this study suggest that N deposited from fog may be an important source of N for plant growth in forests of the SCAB where fog occurrence and pollution exposure coincide. 5 refs., 5 figs., 3 tabs.

Daytime sea fog retrieval based on GOCI data: a case study over the Yellow Sea.

Science.gov (United States)

Yuan, Yibo; Qiu, Zhongfeng; Sun, Deyong; Wang, Shengqiang; Yue, Xiaoyuan

2016-01-25

In this paper, a new daytime sea fog detection algorithm has been developed by using Geostationary Ocean Color Imager (GOCI) data. Based on spectral analysis, differences in spectral characteristics were found over different underlying surfaces, which include land, sea, middle/high level clouds, stratus clouds and sea fog. Statistical analysis showed that the Rrc (412 nm) (Rayleigh Corrected Reflectance) of sea fog pixels is approximately 0.1-0.6. Similarly, various band combinations could be used to separate different surfaces. Therefore, three indices (SLDI, MCDI and BSI) were set to discern land/sea, middle/high level clouds and fog/stratus clouds, respectively, from which it was generally easy to extract fog pixels. The remote sensing algorithm was verified using coastal sounding data, which demonstrated that the algorithm had the ability to detect sea fog. The algorithm was then used to monitor an 8-hour sea fog event and the results were consistent with observational data from buoys data deployed near the Sheyang coast (121°E, 34°N). The goal of this study was to establish a daytime sea fog detection algorithm based on GOCI data, which shows promise for detecting fog separately from stratus.

Characterization of mineral particles in winter fog of Beijing analyzed by TEM and SEM.

Science.gov (United States)

Li, Weijun; Shao, Longyi

2010-02-01

Aerosol samples were collected during winter fog and nonfog episodes in Beijing. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were applied to study morphologies, sizes, and compositions of aerosol particles. TEM observation indicates that most mineral particles collected in fog episode are scavenged in fog droplets. Number-size distributions of mineral particles collected in fog and nonfog episodes show two main peaks at the ranges of 0.1-0.3 and 1-2.5 microm, respectively. Based on their major compositions, mineral particles mainly include Si-rich, Ca-rich, and S-rich. Average S/Ca ratio of mineral particles collected in fog episode is 6.11, being eight times higher than that in nonfog episodes. Development mechanism of individual mineral particles in fog droplets is proposed. It is suggested that mineral particles with abundant alkaline components (e.g., "Ca-rich" particles) occurred in air should alleviate acidic degree of fog and contribute to complexity of fog droplets in Beijing.

Evaluation of physical and chemical properties and their interactions in fat, oil, and grease (FOG) deposits.

Science.gov (United States)

Gross, Martin A; Jensen, Jeanette L; Gracz, Hanna S; Dancer, Jens; Keener, Kevin M

2017-10-15

Fat, oil and grease (FOG) blockages in sewer systems are a substantial problem in the United States. It has been estimated that over 50% of sewer overflows are a result of FOG blockages. In this work, a thorough laboratory study was undertaken to examine key variables that contribute to FOG deposit formation under controlled conditions. Physical and chemical properties and their interactions were evaluated and conditions that generated deposits that mimicked field FOG deposits were identified. It was found that 96 of the of 128 reaction conditions tested in the laboratory formed FOG deposits with similar physical and chemical characteristics as field FOG deposits. It was also found that FOG deposits can be created through fatty acid crystallization and not just saponification. Furthermore FOG deposits were found to be more complex than previously documented and contain free fatty acids, fatty acid metal salts, triacylglycerol's, diacylglycerol's and, monoacylglycerol's. Lastly it was found that FOG deposits that only contained saturated fatty acids were on average 2.1 times higher yield strength than deposits that contained unsaturated fatty acids. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pollution in coastal fog at Alto Patache, Northern Chile.

Science.gov (United States)

Sträter, Ellen; Westbeld, Anna; Klemm, Otto

2010-11-01

The Atacama Desert in Northern Chile is one of the most arid places on earth. However, fog occurs regularly at the coastal mountain range and can be collected at different sites in Chile to supply settlements at the coast with freshwater. This is also planned in the fog oasis Alto Patache (20°49'S, 70°09'W). For this pilot study, we collected fog water samples in July and August 2008 for chemical analysis to find indications for its suitability for domestic use. Fog water samples were taken with a cylindrical scientific fog collector and from the net and the storage tank of a Large Fog Collector (LFC). The pHs of advective fog, originating from the stratus cloud deck over the Eastern Pacific, varied between 2.9 and 3.5. Orographic fog, which was formed locally, exhibited a pH of 2.5. About 50% of the total ionic concentration was due to sea salt. High percentages of sulfate and very high enrichment factors (versus sea salt) of heavy metals were found. Both backward trajectories and the enrichment factors indicate that the high concentrations of ions and heavy metals in fog were influenced by anthropogenic activities along the Chilean Pacific Coast such as power plants, mining, and steel industry. We found no direct indication for the importance of other sources such as the emission of dimethyl sulfide from the ocean and subsequent atmospheric oxidation for acidity and sulfate or soil erosion for heavy metal concentrations. When fog water was collected by the LFC, it apparently picked up large amounts of dry deposition which accumulated on the nets during fog-free periods. This material is rinsed off the collector shortly after the onset of a fog event with the water collected first. During the first flush, some concentrations of acidity, nitrate, As, and Se, largely exceeded the Chilean drinking water limits. Before any use of fog water for domestic purpose, its quality should be checked on a regular basis. Strategies to mitigate fog water pollution are given.

Fog Simulations Based on Multi-Model System: A Feasibility Study

Science.gov (United States)

Shi, Chune; Wang, Lei; Zhang, Hao; Zhang, Su; Deng, Xueliang; Li, Yaosun; Qiu, Mingyan

2012-05-01

Accurate forecasts of fog and visibility are very important to air and high way traffic, and are still a big challenge. A 1D fog model (PAFOG) is coupled to MM5 by obtaining the initial and boundary conditions (IC/BC) and some other necessary input parameters from MM5. Thus, PAFOG can be run for any area of interest. On the other hand, MM5 itself can be used to simulate fog events over a large domain. This paper presents evaluations of the fog predictability of these two systems for December of 2006 and December of 2007, with nine regional fog events observed in a field experiment, as well as over a large domain in eastern China. Among the simulations of the nine fog events by the two systems, two cases were investigated in detail. Daily results of ground level meteorology were validated against the routine observations at the CMA observational network. Daily fog occurrences for the two study periods was validated in Nanjing. General performance of the two models for the nine fog cases are presented by comparing with routine and field observational data. The results of MM5 and PAFOG for two typical fog cases are verified in detail against field observations. The verifications demonstrated that all methods tended to overestimate fog occurrence, especially for near-fog cases. In terms of TS/ETS, the LWC-only threshold with MM5 showed the best performance, while PAFOG showed the worst. MM5 performed better for advection-radiation fog than for radiation fog, and PAFOG could be an alternative tool for forecasting radiation fogs. PAFOG did show advantages over MM5 on the fog dissipation time. The performance of PAFOG highly depended on the quality of MM5 output. The sensitive runs of PAFOG with different IC/BC showed the capability of using MM5 output to run the 1D model and the high sensitivity of PAFOG on cloud cover. Future works should intensify the study of how to improve the quality of input data (e.g. cloud cover, advection, large scale subsidence) for the 1D

Effectiveness of Hand Sanitizers with and without Organic Acids for Removal of Rhinovirus from Hands ▿

Science.gov (United States)

Turner, Ronald B.; Fuls, Janice L.; Rodgers, Nancy D.

2010-01-01

These studies evaluated the effectiveness of ethanol hand sanitizers with or without organic acids to remove detectable rhinovirus from the hands and prevent experimental rhinovirus infection. Ethanol hand sanitizers were significantly more effective than hand washing with soap and water. The addition of organic acids to the ethanol provided residual virucidal activity that persisted for at least 4 h. Whether these treatments will reduce rhinovirus infection in the natural setting remains to be determined. PMID:20047916

A security mechanism based on evolutionary game in fog computing

Directory of Open Access Journals (Sweden)

Yan Sun

2018-02-01

Full Text Available Fog computing is a distributed computing paradigm at the edge of the network and requires cooperation of users and sharing of resources. When users in fog computing open their resources, their devices are easily intercepted and attacked because they are accessed through wireless network and present an extensive geographical distribution. In this study, a credible third party was introduced to supervise the behavior of users and protect the security of user cooperation. A fog computing security mechanism based on human nervous system is proposed, and the strategy for a stable system evolution is calculated. The MATLAB simulation results show that the proposed mechanism can reduce the number of attack behaviors effectively and stimulate users to cooperate in application tasks positively.

A security mechanism based on evolutionary game in fog computing.

Science.gov (United States)

Sun, Yan; Lin, Fuhong; Zhang, Nan

2018-02-01

Fog computing is a distributed computing paradigm at the edge of the network and requires cooperation of users and sharing of resources. When users in fog computing open their resources, their devices are easily intercepted and attacked because they are accessed through wireless network and present an extensive geographical distribution. In this study, a credible third party was introduced to supervise the behavior of users and protect the security of user cooperation. A fog computing security mechanism based on human nervous system is proposed, and the strategy for a stable system evolution is calculated. The MATLAB simulation results show that the proposed mechanism can reduce the number of attack behaviors effectively and stimulate users to cooperate in application tasks positively.

A Source Anonymity-Based Lightweight Secure AODV Protocol for Fog-Based MANET.

Science.gov (United States)

Fang, Weidong; Zhang, Wuxiong; Xiao, Jinchao; Yang, Yang; Chen, Wei

2017-06-17

Fog-based MANET (Mobile Ad hoc networks) is a novel paradigm of a mobile ad hoc network with the advantages of both mobility and fog computing. Meanwhile, as traditional routing protocol, ad hoc on-demand distance vector (AODV) routing protocol has been applied widely in fog-based MANET. Currently, how to improve the transmission performance and enhance security are the two major aspects in AODV's research field. However, the researches on joint energy efficiency and security seem to be seldom considered. In this paper, we propose a source anonymity-based lightweight secure AODV (SAL-SAODV) routing protocol to meet the above requirements. In SAL-SAODV protocol, source anonymous and secure transmitting schemes are proposed and applied. The scheme involves the following three parts: the source anonymity algorithm is employed to achieve the source node, without being tracked and located; the improved secure scheme based on the polynomial of CRC-4 is applied to substitute the RSA digital signature of SAODV and guarantee the data integrity, in addition to reducing the computation and energy consumption; the random delayed transmitting scheme (RDTM) is implemented to separate the check code and transmitted data, and achieve tamper-proof results. The simulation results show that the comprehensive performance of the proposed SAL-SAODV is a trade-off of the transmission performance, energy efficiency, and security, and better than AODV and SAODV.

Fog along the Meuse Valley

Energy Technology Data Exchange (ETDEWEB)

Firket, J

1936-01-01

An account of a fog-pollution incident, 1 through 5 December 1930 was described. Many people were injured, several hundred were severely hampered by respiratory troubles, and 63 people died on December 4 and 5. Many cattle were slaughtered because of sickness. Symptoms coincided with the arrival and departure of fog. Medical conditions included: retrosternal pain, coughing fits, dypsnea similar to that accompanying asthma, cardiovascular collapse in those particularly susceptible (e.g., already crippled by asthma or cardiac insufficiency), irritation of respiratory membranes, and deposition of fine soot as far as alveoli. Retrospective observation and calculation pointed to SO/sub 2/ from burning of coal and sulfuric acid from fog-metal oxide-catalyzed conversion of SO/sub 2/ as the possible deadly pollutants. Maximum (calculated) SO/sub 2/ concentration was 100 mg/m/sup 3/.

Intrusion Detection System Based on Decision Tree over Big Data in Fog Environment

Directory of Open Access Journals (Sweden)

Kai Peng

2018-01-01

Full Text Available Fog computing, as the supplement of cloud computing, can provide low-latency services between mobile users and the cloud. However, fog devices may encounter security challenges as a result of the fog nodes being close to the end users and having limited computing ability. Traditional network attacks may destroy the system of fog nodes. Intrusion detection system (IDS is a proactive security protection technology and can be used in the fog environment. Although IDS in tradition network has been well investigated, unfortunately directly using them in the fog environment may be inappropriate. Fog nodes produce massive amounts of data at all times, and, thus, enabling an IDS system over big data in the fog environment is of paramount importance. In this study, we propose an IDS system based on decision tree. Firstly, we propose a preprocessing algorithm to digitize the strings in the given dataset and then normalize the whole data, to ensure the quality of the input data so as to improve the efficiency of detection. Secondly, we use decision tree method for our IDS system, and then we compare this method with Naïve Bayesian method as well as KNN method. Both the 10% dataset and the full dataset are tested. Our proposed method not only completely detects four kinds of attacks but also enables the detection of twenty-two kinds of attacks. The experimental results show that our IDS system is effective and precise. Above all, our IDS system can be used in fog computing environment over big data.

The Research on the Spectral Characteristics of Sea Fog Based on Caliop and Modis Data

Science.gov (United States)

Wan, J.; Su, J.; Liu, S.; Sheng, H.

2018-04-01

In view of that difficulty of distinguish between sea fog and low cloud by optical remote sensing mean, the research on spectral characteristics of sea fog is focused and carried out. The satellite laser radar CALIOP data and the high spectral MODIS data were obtained from May to December 2017, and the scattering coefficient and the vertical height information were extracted from the atmospheric attenuation of the lower star to extract the sea fog sample points, and the spectral response curve based on MODIS was formed to analyse the spectral response characteristics of the sea fog, thus providing a theoretical basis for the monitoring of sea fog with optical remote sensing image.

THE RESEARCH ON THE SPECTRAL CHARACTERISTICS OF SEA FOG BASED ON CALIOP AND MODIS DATA

Directory of Open Access Journals (Sweden)

J. Wan

2018-04-01

Full Text Available In view of that difficulty of distinguish between sea fog and low cloud by optical remote sensing mean, the research on spectral characteristics of sea fog is focused and carried out。The satellite laser radar CALIOP data and the high spectral MODIS data were obtained from May to December 2017, and the scattering coefficient and the vertical height information were extracted from the atmospheric attenuation of the lower star to extract the sea fog sample points, and the spectral response curve based on MODIS was formed to analyse the spectral response characteristics of the sea fog, thus providing a theoretical basis for the monitoring of sea fog with optical remote sensing image.

An Alternative Transcript of the FOG-2 Gene Encodes a FOG-2 Isoform lacking the FOG Repression Motif

OpenAIRE

Dale, Rodney M.; Remo, Benjamin F.; Svensson, Eric C.

2007-01-01

The FOG family of transcriptional co-factors is composed of two members in mammals: FOG-1 and FOG-2. Both have been shown to bind to GATA factors and function as transcriptional co-repressors in specific cell and promoter contexts. We have previously defined a novel repression domain localized to the N-terminus of each FOG family member, the FOG Repression Motif, which is necessary for FOG-mediated transcriptional repression. In this report, we describe the identification and characterization...

Coastal Fog As a System: Defining an Interdisciplinary Research Agenda (Invited)

Science.gov (United States)

Weathers, K. C.

2013-12-01

Fog is a graphic and charismatic phenomenon that is commonplace in coastal geographies around the globe. Some of the first concerns about fog and human health arose over 50 years ago in foggy cities around the world, such as London and Los Angeles, where thousands of excess deaths have been attributed to the presence of acidic fog particles. Further, the mere presence of fog also results in airplane, ship, and automobile traffic delays and accidents, especially in coastal areas. In many Pacific coastal systems, fog is the primary--sometimes the only--source of water, it is a fundamental moderator of local and regional climate, and it influences productivity of near-coast ecosystems. In recent years fog has been identified as a vector for limiting nutrients (e.g., nitrogen and phosphorus), pollutants (e.g., mercury), and microbes (including human pathogens), all of whose origin is thought to be biologically controlled in the ocean. Researchers have also started inquiring into the importance of fog in modulating weather as well as local, regional and, global climate dynamics. However, from its formation in marine systems to deposition in terrestrial systems, understanding the fog system is an intellectual and interdisciplinary challenge that, to date, has gone unmet. This is in part because the fog system is complex: it involves feedbacks and coupling between physical, chemical, and biological systems in the ocean, atmosphere, and near-coast terrestrial systems. In addition, its formation is the result of global processes, yet its distribution as well as its impacts are local, and extremely spatially and temporally heterogeneous within and across landscapes. Here we describe a systems approach and framework for understanding the controls on fog formation as well as feedbacks to its formation, dissipation, distribution, flows, and stocks or pools. In addition, an interdisciplinary research agenda for coastal fog as a system will be described based on the outcome of a

A Wavelet-based method for processing signal of fog in strap-down inertial systems

Energy Technology Data Exchange (ETDEWEB)

Han, D.; Xiong, C.; Liu, H. [Huazhong University of Science & Technology, Wuhan (China)

2009-07-01

Fibre optical gyroscopes (FOGs) have been applied widely in many fields in contrast, with their counterparts such as mechanical gyroscopes and ring laser gyroscopes. The precision of FOG is affected significantly by bias drift, angle random walk temperature effects and noises. Especially, uncertain disturbances resulting from road irregularities often affect accuracy of strap-down inertial system (SINS). Hence, eliminating, uncertain disturbances from outputs of it FOG plays a crucial role to improve accuracy of SINS. This paper presents a wavelet-based method for denoising signals of FOGs in SINS used for exploring and rescuing robots in coal mines. Property of road irregularities in mines is taken into account as a key factor resulting in uncertain disturbances in this research. Both frequency band and amplitude of uncertain disturbances are introduced to choose filtering thresholds. Experimental results have demonstrated that the proposed method can efficiently eliminate uncertain disturbances due to road irregularities from outputs of FOGs and improve accuracy of surrogate data. It indicates that the proposed method has a significant potential in FOG-related applications.

Chemistry of fog: Factors regulating its composition

Energy Technology Data Exchange (ETDEWEB)

Sigg, L.; Stumm, W.; Zobrist, J.; Zuercher, F.

1987-05-01

Fog droplets acquire their composition, in principle, by similar mechanisms as cloudwater droplets. The solute concentrations of fogwater (H/sup +/, NH/sub 4/+, NO/sub 3//sup -/, SO/sub 4//sup 2-/, Cl/sup -/, organic acids, and trace metals) are 10-50 times higher than those of rainwater. Urban fogs reflect in their composition the effect of local emissions. Occasionally, very acidic fogs, often due to HCl contamination, with pH values as low as 2 were observed. Fogs can affect ecosystems by concentrating, moving, and depositing chemicals and atmospheric pollutants. Basically, the major composition of fogwater results from the interaction of SO/sub 2/, NO/sub x/, CO/sub 2/, HCl, and NH/sub 3/ with H/sub 2/O in an oxidative environment (O/sub 2/, O/sub 3/, OH/sup ./, H/sub 2/O/sub 2/, sunlight) and in the presence of some traces that may act as redox catalysts (metals such as Cu, Fe, Mn, organic material such as hydrocarbons, and dust and soot surfaces). - The composition of numerous (radiation type) ground-level fogs, and their variation with time from formation to dissipation, have been investigated in Duebendorf (near Zuerich) in order to evaluate the factors that influence the composition; specifically to explore the mechanisms of NO/sub 3//sup -/ and SO/sub 4//sup 2/ incorperation Surprisingly constant motor propertions of NH/sub 4//sup +/:SO/sub 4//sup 2-/:NO/sub 3//sup -/ were observed in the fog. The results do not permit to establish unambiguously to what extent the inclusion of SO/sub 4//sup 2-/ and NO/sub 3//sup -/ into the fogwater is due to the oxidation of absorbed and dissolved SO/sub 2/ and the scavenging of gaseous HNO/sub 3/ or by dissolution of ambient previously formed ammonium sulfate and ammonium nitrate aerosols.

Control of the Biofilms Formed by Curli- and Cellulose-Expressing Shiga Toxin-Producing Escherichia coli Using Treatments with Organic Acids and Commercial Sanitizers.

Science.gov (United States)

Park, Yoen Ju; Chen, Jinru

2015-05-01

Biofilms are a mixture of bacteria and extracellular products secreted by bacterial cells and are of great concern to the food industry because they offer physical, mechanical, and biological protection to bacterial cells. This study was conducted to quantify biofilms formed by different Shiga toxin-producing Escherichia coli (STEC) strains on polystyrene and stainless steel surfaces and to determine the effectiveness of sanitizing treatments in control of these biofilms. STEC producing various amounts of cellulose (n = 6) or curli (n = 6) were allowed to develop biofilms on polystyrene and stainless steel surfaces at 28°C for 7 days. The biofilms were treated with 2% acetic or lactic acid and manufacturer-recommended concentrations of acidic or alkaline sanitizers, and residual biofilms were quantified. Treatments with the acidic and alkaline sanitizers were more effective than those with the organic acids for removing the biofilms. Compared with their counterparts, cells expressing a greater amount of cellulose or curli formed more biofilm mass and had greater residual mass after sanitizing treatments on polystyrene than on stainless steel. Research suggests that the organic acids and sanitizers used in the present study differed in their ability to control biofilms. Bacterial surface components and cell contact surfaces can influence both biofilm formation and the efficacy of sanitizing treatments. These results provide additional information on control of biofilms formed by STEC.

Death caused by ingestion of an ethanol-based hand sanitizer.

Science.gov (United States)

Schneir, Aaron B; Clark, Richard F

2013-09-01

The use of hand sanitizer is effective in preventing the transmission of disease. Many hand sanitizers are alcohol-based, and significant intoxications have occurred, often in health care facilities, including the emergency department (ED). We present this case to highlight potential toxicity after the ingestion of an ethanol-based hand sanitizer. A 36-year-old man presented to the ED with ethanol intoxication. Ethanol breath analysis was measured at 278 mg/dL. After 4 h, the patient was less intoxicated and left the ED. Thirty minutes later, he was found apneic and pulseless in the ED waiting room bathroom after having ingested an ethanol-based hand sanitizer. Soon after a brief resuscitation, his serum ethanol was 526 mg/dL. He never regained consciousness and died 7 days later. No other cause of death was found. The case highlights the potential for significant toxicity after the ingestion of a product found throughout health care facilities. Balancing the benefit of hand sanitizers for preventing disease transmission and their potential misuse remains a challenge. Copyright © 2013 Elsevier Inc. All rights reserved.

Characterization of reactants, reaction mechanisms, and reaction products in atmospheric water droplets: fog, cloud, dew, and rain water chemistry. Final report

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, M.R.; Jacob, D.J.; Waldman, J.M.; Munger, J.W.; Flagan, R.C.

1985-04-01

Analyses of ground-based fogwater collected by inertial impaction in the Los Angeles basin, the San Gabriel Mountains, and the San Joaquin Valley revealed very high concentrations of NO3 SO4 S, NH4 , and other ions, often coupled with very high acidities. Fogs and strata in the Los Angeles basin typically had pH values ranging from 2 to 4. Acidities were not as high in the San Joaquin Valley, mostly because of scavenging by the fogs of ammonia from agricultural sources. Deposition of fogwater was observed to be an important pollutant sink during stagnation episodes in the San Joaquin Valley, and may also be an important source of acid input to surfaces in some areas. Kinetic experiments showed that H2O2 is important in the oxidation of S(IV) to S(VI) at low pH. Metal-catalyzed autoxidation could also be an important source of sulfate. However, the extreme acidities observed in fogs (below pH 3) require condensation on preexistent acidic nuclei and scavenging of gaseous nitric acid. Stabilization of S(IV) in the fog was observed, and this was attributed to the formation of S(IV)-aldehyde adducts.

Fog Harvesting with Harps.

Science.gov (United States)

Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

2018-04-11

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

CHEMISTRY OF FOG WATER IN CALIFORNIA'S CENTRAL VALLEY: 2. PHOTOCHEMICAL TRANSFORMATIONS OF AMINO ACIDS AND ALKYL AMINES. (R825433)

Science.gov (United States)

Although amino compounds are seemingly ubiquitous in atmospheric particles and deposition, little is known of their fate in the troposphere. We report here on the fate of 21 amino acids and alkyl amines in fog waters from Davis, California, illuminated with simulated sunlight ...

Radiation Fog in the US Mid-Atlantic Region: Chemical Composition, Trends, and Gas-Liquid Partitioning

Science.gov (United States)

Straub, D.

2016-12-01

The chemical composition of radiation fog has been studied at a rural site in central Pennsylvania over an eight year period extending through 2015. Bulk fog samples were collected with an automated Caltech Heated Rod Cloud Collector (CHRCC) and analyzed for pH, inorganic ions, organic acids, total organic carbon (TOC), and total nitrogen (TN). Over the duration of the project, 146 samples were collected and used to document chemical composition, evaluate changes over time, and to investigate partitioning between the gas and aqueous phases. Ammonium, sulfate, calcium, and nitrate were the most abundant inorganic ions while acetate and formate were the dominant organic acids. Organic acids contributed about 15% to TOC. Inorganic nitrogen accounted for the majority of TN, with only 18% of TN attributed to organic nitrogen. Overall, organic matter contributed 52% to the total mass loading of the fog samples, a value that is higher than reported for other radiation fog studies. Statistically significant decreasing trends were observed for sulfate, ammonium, chloride, nitrate, and pH. These trends coincide with reductions in emissions from fossil fuel combustion that have been documented over this time period. Seasonal trends were also detected for nitrate, ammonium, potassium, phosphate, acetate and formate which appear to be related to the agricultural growing season. Based on simultaneous measurements of gas phase ammonia and ammonium in the fog samples, significant deviations from equilibrium were found. In low pH samples, ammonium concentrations were much lower than equilibrium predicts, while the opposite occurred in high pH samples. Modeling suggested that mass transfer limitations contributed to the departure from equilibrium. Similarly, predictions of bicarbonate concentrations based on equilibrium with gas phase carbon dioxide appears to underestimate the actual amount of bicarbonate present in samples collected during this study.

Marine fog: a review

Science.gov (United States)

Koračin, Darko; Dorman, Clive E.; Lewis, John M.; Hudson, James G.; Wilcox, Eric M.; Torregrosa, Alicia

2014-01-01

The objective of this review is to discuss physical processes over a wide range of spatial scales that govern the formation, evolution, and dissipation of marine fog. We consider marine fog as the collective combination of fog over the open sea along with coastal sea fog and coastal land fog. The review includes a history of sea fog research, field programs, forecasting methods, and detection of sea fog via satellite observations where similarity in radiative properties of fog top and the underlying sea induce further complexity. The main thrust of the study is to provide insight into causality of fog including its initiation, maintenance, and destruction. The interplay between the various physical processes behind the several stages of marine fog is among the most challenging aspects of the problem. An effort is made to identify this interplay between processes that include the microphysics of fog formation and maintenance, the influence of large-scale circulation and precipitation/clouds, radiation, turbulence (air-sea interaction), and advection. The environmental impact of marine fog is also addressed. The study concludes with an assessment of our current knowledge of the phenomenon, our principal areas of ignorance, and future lines of research that hold promise for advances in our understanding.

Effect of Leaf Surface Chemical Properties on Efficacy of Sanitizer for Rotavirus Inactivation

Science.gov (United States)

Fuzawa, Miyu; Ku, Kang-Mo; Palma-Salgado, Sindy Paola; Nagasaka, Kenya; Feng, Hao; Juvik, John A.; Sano, Daisuke; Shisler, Joanna L.

2016-01-01

ABSTRACT The use of sanitizers is essential for produce safety. However, little is known about how sanitizer efficacy varies with respect to the chemical surface properties of produce. To answer this question, the disinfection efficacies of an oxidant-based sanitizer and a new surfactant-based sanitizer for porcine rotavirus (PRV) strain OSU were examined. PRV was attached to the leaf surfaces of two kale cultivars with high epicuticular wax contents and one cultivar of endive with a low epicuticular wax content and then treated with each sanitizer. The efficacy of the oxidant-based sanitizer correlated with leaf wax content as evidenced by the 1-log10 PRV disinfection on endive surfaces (low wax content) and 3-log10 disinfection of the cultivars with higher wax contents. In contrast, the surfactant-based sanitizer showed similar PRV disinfection efficacies (up to 3 log10) that were independent of leaf wax content. A statistical difference was observed with the disinfection efficacies of the oxidant-based sanitizer for suspended and attached PRV, while the surfactant-based sanitizer showed similar PRV disinfection efficacies. Significant reductions in the entry and replication of PRV were observed after treatment with either disinfectant. Moreover, the oxidant-based-sanitizer-treated PRV showed sialic acid-specific binding to the host cells, whereas the surfactant-based sanitizer increased the nonspecific binding of PRV to the host cells. These findings suggest that the surface properties of fresh produce may affect the efficacy of virus disinfection, implying that food sanitizers should be carefully selected for the different surface characteristics of fresh produce. IMPORTANCE Food sanitizer efficacies are affected by the surface properties of vegetables. This study evaluated the disinfection efficacies of two food sanitizers, an oxidant-based sanitizer and a surfactant-based sanitizer, on porcine rotavirus strain OSU adhering to the leaf epicuticular surfaces of

About Security Solutions in Fog Computing

Directory of Open Access Journals (Sweden)

Eugen Petac

2016-01-01

Full Text Available The key for improving a system's performance, its security and reliability is to have the dataprocessed locally in remote data centers. Fog computing extends cloud computing through itsservices to devices and users at the edge of the network. Through this paper it is explored the fogcomputing environment. Security issues in this area are also described. Fog computing providesthe improved quality of services to the user by complementing shortages of cloud in IoT (Internet ofThings environment. Our proposal, named Adaptive Fog Computing Node Security Profile(AFCNSP, which is based security Linux solutions, will get an improved security of fog node withrich feature sets.

Referenceless Prediction of Perceptual Fog Density and Perceptual Image Defogging.

Science.gov (United States)

Choi, Lark Kwon; You, Jaehee; Bovik, Alan Conrad

2015-11-01

We propose a referenceless perceptual fog density prediction model based on natural scene statistics (NSS) and fog aware statistical features. The proposed model, called Fog Aware Density Evaluator (FADE), predicts the visibility of a foggy scene from a single image without reference to a corresponding fog-free image, without dependence on salient objects in a scene, without side geographical camera information, without estimating a depth-dependent transmission map, and without training on human-rated judgments. FADE only makes use of measurable deviations from statistical regularities observed in natural foggy and fog-free images. Fog aware statistical features that define the perceptual fog density index derive from a space domain NSS model and the observed characteristics of foggy images. FADE not only predicts perceptual fog density for the entire image, but also provides a local fog density index for each patch. The predicted fog density using FADE correlates well with human judgments of fog density taken in a subjective study on a large foggy image database. As applications, FADE not only accurately assesses the performance of defogging algorithms designed to enhance the visibility of foggy images, but also is well suited for image defogging. A new FADE-based referenceless perceptual image defogging, dubbed DEnsity of Fog Assessment-based DEfogger (DEFADE) achieves better results for darker, denser foggy images as well as on standard foggy images than the state of the art defogging methods. A software release of FADE and DEFADE is available online for public use: http://live.ece.utexas.edu/research/fog/index.html.

Effectiveness of sanitizing agents in inactivating Escherichia coli (ATCC 25922 in food cutting board surfaces. Removal E. coli using different sanitizers

Directory of Open Access Journals (Sweden)

CEZAR AUGUSTO BELTRAME

2016-03-01

Full Text Available The objective of this study was to investigate Escherichia coli adhesion on new and used polyethylene cutting board surface and evaluate it’s removal using different sanitizer (peracetic acid,chlorhexidine, sodium hypochlorite and organic acids. Results indicated that the number of adherent cells increased with time in both surfaces evaluated. Evaluating the sanitizer action, 0.5%peracetic acid was more effective in removal E. coli than chlorhexidine and organic acids at same concentration in both surfaces. Peracetic acid and sodium hypochlorite also showed effectiveness at concentrations of 0.2% and 0.5% on new surfaces, respectively. 0.8% of chlorhexidine and 2.0% of organic acids showed similar effectiveness in the removal E. coli on new and used surfaces, respectively.These results suggest that peracetic acid is considerable promise sanitizer for application in surfaces of the food processing industry.

FOG Random Drift Signal Denoising Based on the Improved AR Model and Modified Sage-Husa Adaptive Kalman Filter.

Science.gov (United States)

Sun, Jin; Xu, Xiaosu; Liu, Yiting; Zhang, Tao; Li, Yao

2016-07-12

In order to reduce the influence of fiber optic gyroscope (FOG) random drift error on inertial navigation systems, an improved auto regressive (AR) model is put forward in this paper. First, based on real-time observations at each restart of the gyroscope, the model of FOG random drift can be established online. In the improved AR model, the FOG measured signal is employed instead of the zero mean signals. Then, the modified Sage-Husa adaptive Kalman filter (SHAKF) is introduced, which can directly carry out real-time filtering on the FOG signals. Finally, static and dynamic experiments are done to verify the effectiveness. The filtering results are analyzed with Allan variance. The analysis results show that the improved AR model has high fitting accuracy and strong adaptability, and the minimum fitting accuracy of single noise is 93.2%. Based on the improved AR(3) model, the denoising method of SHAKF is more effective than traditional methods, and its effect is better than 30%. The random drift error of FOG is reduced effectively, and the precision of the FOG is improved.

An IC-MS/MS Method for the Determination of 1-Hydroxyethylidene-1,1-diphosphonic Acid on Uncooked Foods Treated with Peracetic Acid-Based Sanitizers.

Science.gov (United States)

Suzuki, Ippei; Kubota, Hiroki; Ohtsuki, Takashi; Tatebe, Chiye; Tada, Atsuko; Yano, Takeo; Akiyama, Hiroshi; Sato, Kyoko

2016-01-01

A rapid, sensitive, and specific analytical method for the determination of 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) on uncooked foods after treatment with a peracetic acid-based sanitizer (PAS) was developed. The method involves simple sample preparation steps and analysis using ion chromatography (IC) coupled with tandem mass spectrometry (MS/MS). The quantification limits of HEDP on uncooked foods are 0.007 mg/kg for vegetables and fruits and 0.2 mg/kg for meats. The recovery and relative standard deviation (RSD) of HEDP analyses of uncooked foods ranged from 73.9 to 103.8% and 1.9 to 12.6%, respectively. The method's accuracy and precision were evaluated by inter-day recovery tests. The recovery for all samples ranged from 93.6 to 101.2%, and the within-laboratory repeatability and reproducibility were evaluated based on RSD values, which were less than 6.9 and 11.5%, respectively. Analyses of PAS-treated fruits and vegetables using the developed method indicated levels of HEDP ranging from 0.008 to 0.351 mg/kg. Therefore, the results of the present study suggest that the proposed method is an accurate, precise, and reliable way to determine residual HEDP levels on PAS-treated uncooked foods.

Characterization of multilayer anti-fog coatings.

Science.gov (United States)

Chevallier, Pascale; Turgeon, Stéphane; Sarra-Bournet, Christian; Turcotte, Raphaël; Laroche, Gaétan

2011-03-01

Fog formation on transparent substrates constitutes a major challenge in several optical applications requiring excellent light transmission characteristics. Anti-fog coatings are hydrophilic, enabling water to spread uniformly on the surface rather than form dispersed droplets. Despite the development of several anti-fog coating strategies, the long-term stability, adherence to the underlying substrate, and resistance to cleaning procedures are not yet optimal. We report on a polymer-based anti-fog coating covalently grafted onto glass surfaces by means of a multistep process. Glass substrates were first activated by plasma functionalization to provide amino groups on the surface, resulting in the subsequent covalent bonding of the polymeric layers. The anti-fog coating was then created by the successive spin coating of (poly(ethylene-maleic anhydride) (PEMA) and poly(vinyl alcohol) (PVA) layers. PEMA acted as an interface by covalently reacting with both the glass surface amino functionalities and the PVA hydroxyl groups, while PVA added the necessary surface hydrophilicity to provide anti-fog properties. Each step of the procedure was monitored by XPS, which confirmed the successful grafting of the coating. Coating thickness was evaluated by profilometry, nanoindentation, and UV visible light transmission. The hydrophilic nature of the anti-fog coating was assessed by water contact angle (CA), and its anti-fog efficiency was determined visually and tested quantitatively for the first time using an ASTM standard protocol. Results show that the PEMA/PVA coating not only delayed the initial period required for fog formation but also decreased the rate of light transmission decay. Finally, following a 24 hour immersion in water, these PEMA/PVA coatings remained stable and preserved their anti-fog properties.

Prognostics and health management system for hydropower plant based on fog computing and docker container

Science.gov (United States)

Xiao, Jian; Zhang, Mingqiang; Tian, Haiping; Huang, Bo; Fu, Wenlong

2018-02-01

In this paper, a novel prognostics and health management system architecture for hydropower plant equipment was proposed based on fog computing and Docker container. We employed the fog node to improve the real-time processing ability of improving the cloud architecture-based prognostics and health management system and overcome the problems of long delay time, network congestion and so on. Then Storm-based stream processing of fog node was present and could calculate the health index in the edge of network. Moreover, the distributed micros-service and Docker container architecture of hydropower plants equipment prognostics and health management was also proposed. Using the micro service architecture proposed in this paper, the hydropower unit can achieve the goal of the business intercommunication and seamless integration of different equipment and different manufacturers. Finally a real application case is given in this paper.

An analysis of fog events at Belgrade International Airport

Science.gov (United States)

Veljović, Katarina; Vujović, Dragana; Lazić, Lazar; Vučković, Vladan

2015-01-01

A preliminary study of the occurrence of fog at Belgrade "Nikola Tesla" Airport was carried out using a statistical approach. The highest frequency of fog has occurred in the winter months of December and January and far exceeded the number of fog days in the spring and the beginning of autumn. The exceptionally foggy months, those having an extreme number of foggy days, occurred in January 1989 (18 days), December 1998 (18 days), February 2005 (17 days) and October 2001 (15 days). During the winter months (December, January and February) from 1990 to 2005 (16 years), fog occurred most frequently between 0600 and 1000 hours, and in the autumn, between 0500 and 0800 hours. In summer, fog occurred most frequently between 0300 and 0600 hours. During the 11-year period from 1995 to 2005, it was found that there was a 13 % chance for fog to occur on two consecutive days and a 5 % chance that it would occur 3 days in a row. In October 2001, the fog was observed over nine consecutive days. During the winter half year, 52.3 % of fog events observed at 0700 hours were in the presence of stratus clouds and 41.4 % were without the presence of low clouds. The 6-h cooling observed at the surface preceding the occurrence of fog between 0000 and 0700 hours ranged mainly from 1 to 4 °C. A new method was applied to assess the probability of fog occurrence based on complex fog criteria. It was found that the highest probability of fog occurrence (51.2 %) takes place in the cases in which the relative humidity is above 97 %, the dew-point depression is 0 °C, the cloud base is lower than 50 m and the wind is calm or weak 1 h before the onset of fog.

Effect of hand sanitizer on the performance of fingermark detection techniques.

Science.gov (United States)

Chadwick, Scott; Neskoski, Melissa; Spindler, Xanthe; Lennard, Chris; Roux, Claude

2017-04-01

Hand sanitizers have seen a rapid increase in popularity amongst the general population and this increased use has led to the belief that hand sanitizers may have an effect on subsequent fingermark detection. Based on this hypothesis, three alcoholic and two non-alcoholic hand sanitizers were evaluated to determine the effect they had on the detection of fingermarks deposited after their use. The following fingermark detection methods were applied: 1,2-indanedione-zinc, ninhydrin, physical developer (porous substrate); and cyanoacrylate, rhodamine 6G, magnetic powder (non-porous substrate). Comparison between hand sanitized fingermarks and non-hand sanitized fingermarks showed that the alcohol-based hand sanitizers did not result in any visible differences in fingermark quality. The non-alcoholic hand sanitizers, however, improved the quality of fingermarks developed with 1,2-indanedione-zinc and ninhydrin, and marginally improved those developed with magnetic powder. Different parameters, including time since hand sanitizer application prior to fingermark deposition and age of deposited mark, were tested to determine the longevity of increased development quality. The non-alcoholic hand sanitized marks showed no decrease in quality when aged for up to two weeks. The time since sanitizer application was determined to be an important factor that affected the quality of non-alcoholic hand sanitized fingermarks. It was hypothesized that the active ingredient in non-alcoholic hand sanitizers, benzalkonium chloride, is responsible for the increase in fingermark development quality observed with amino acid reagents, while the increased moisture content present on the ridges resulted in better powdered fingermarks. Copyright © 2017 Elsevier B.V. All rights reserved.

Fog, cloud, and dew chemistry. Final report

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, M.R.

1989-02-28

The spatial and temporal variations of fog/cloud chemistry were determined in the San Joaquin Valley, in the Los Angeles Basin, and in the Santa Barbara Channel area using automated fog- and cloudwater collectors that were designed and constructed for the project. A significant correlation was observed between the average nighttime cloud- and fogwater loadings of H/sup +/ and NO/sub 3//sup /minus// and the maximum levels of O/sub 3//sup /minus//. Higher aldehydes, a series of dicarbonyls, and a variety of sulfonic acid salts formed by reaction of S(IV) and aldehydes were quantitatively determined in the droplet phase.

Ground-Based Observations and Modeling of the Visibility and Radar Reflectivity in a Radiation Fog Layer

NARCIS (Netherlands)

Boers, R.; Baltink, K.H.; Hemink, H.J.; Bosveld, F.C.; Moerman, M.

2013-01-01

The development of a radiation fog layer at the Cabauw Experimental Site for Atmospheric Research(51.97°N, 4.93°E) on 23 March 2011 was observed with ground-based in situ and remote sensing observationsto investigate the relationship between visibility and radar reflectivity. The fog layer thickness

Forecasting sea fog on the coast of southern China

Science.gov (United States)

Huang, H.; Huang, B.; Liu, C.; Tu, J.; Wen, G.; Mao, W.

2016-12-01

Forecast sea fog is still full of challenges. We have performed the numerical forecasting of sea fog on the coast of southern China by using the operational meso-scale regional model GRAPES (Global/Regional assimilation and prediction system). The GRAPES model horizontal resolution was 3km and with 66 vertical levels. A total of 72 hours forecasting of sea fog was conducted with hourly outputs over the sea fog event. The results show that the model system can predict reasonable characteristics of typical sea fog events on the coast of southern China. The scope of sea fog coincides with the observations of meteorological stations, the observations of the Marine Meteorological Science Experiment Base (MMSEB) at Bohe, Maoming and satellite products of sea fog. The goal of this study is to establish an operational numerical forecasting model system of sea fog on the coast of southern China.

A Novel UDT-Based Transfer Speed-Up Protocol for Fog Computing

Directory of Open Access Journals (Sweden)

Zhijie Han

2018-01-01

Full Text Available Fog computing is a distributed computing model as the middle layer between the cloud data center and the IoT device/sensor. It provides computing, network, and storage devices so that cloud based services can be closer to IOT devices and sensors. Cloud computing requires a lot of bandwidth, and the bandwidth of the wireless network is limited. In contrast, the amount of bandwidth required for “fog computing” is much less. In this paper, we improved a new protocol Peer Assistant UDT-Based Data Transfer Protocol (PaUDT, applied to Iot-Cloud computing. Furthermore, we compared the efficiency of the congestion control algorithm of UDT with the Adobe’s Secure Real-Time Media Flow Protocol (RTMFP, based on UDP completely at the transport layer. At last, we built an evaluation model of UDT in RTT and bit error ratio which describes the performance. The theoretical analysis and experiment result have shown that UDT has good performance in IoT-Cloud computing.

Comparison of passive fog gauges for determining fog duration and fog interception by a Puerto Rican elfin cloud forest

NARCIS (Netherlands)

Holwerda, F; Bruijnzeel, L.A.; Scatena, F.N.

2011-01-01

Between 5 March and 10 May 2001, the performance of three types of passive fog gauges (wire harp WH, standard fog collector SC and Juvik gauge JU) was compared at a wind-exposed Puerto Rican elfin cloud forest site. The gauges were used to determine the timing and duration of fog, as well as

Management of risk of microbial cross-contamination from uncooked frozen hamburgers by alcohol-based hand sanitizer.

Science.gov (United States)

Schaffner, Donald W; Schaffner, Kristin M

2007-01-01

This research was undertaken to determine the effectiveness of an alcohol-based hand sanitizer on hands contaminated with a nonpathogen surrogate for Escherichia coli O157:H7, where the source of the contamination was frozen hamburger patties. A nonpathogenic nalidixic acid-resistant food-grade strain of Enterobacter aerogenes was used to inoculate frozen hamburger patties composed of 76% lean beef and 24% fat. Thirty-two individuals participated to produce the data used in this study. Each participant handled nine patties at least three times, a sample for microbiological analysis was collected from the surface of one hand, the participant sanitized both hands, and a sample was collected from the other hand. Burger handling created perceptible and visible food debris on the hands of most participants. Computer simulations also were used to perform a variety of risk calculations. The average reduction in bacteria from the use of sanitizer on hands contaminated by frozen burgers containing E. aerogenes was 2.6 +/- 0.7 log CFU per hand. An experiment designed to simultaneously test the effect of sanitizer on E. aerogenes and E. coli O157:H7 also revealed no significant difference in sanitizer effectiveness against the two organisms. The results of the real-world risk estimation calculations (using the actual prevalence and concentration of E. coli O157:H7 in ground beef) predict that once in 1 million trials, a single pathogen cell will be transferred to a single lettuce piece. The effectiveness of this sanitizer intervention was similar to that for hand washing and glove use previously reported. The person-to-person microbial reduction variability from sanitizer use is similar to published data for glove use and was less variable than published data on hand washing effectiveness.

Experiments with a straightforward model for the spatial forecast of fog/low stratus clearance based on multi-source data

Science.gov (United States)

Reudenbach, Ch; Bendix, J.

1998-09-01

A straightforward model for the spatial calculation of the time of fog clearance is presented which is based on thermodynamic equations, spatial data sets such as NOAA-AVHRR satellite data, Digital Elevation Model, and horizontal and vertical meteorological observations. The model has been tested on two days with extended fog layers within the study area. The local validation of the model reveals an accuracy in fog clearance of 4 minutes by comparing the model result with meteorological observations. A spatial validation by means of a reference NOAA overpass indicates an under-estimation of the fog-covered area by the model of 2.9% at the time of the reference image. Five minutes before reference time, the spatial correspondence of the modelled and the reference fog coverage increases to 98.9%. The temporal deviation of uncoinciding pixels between reference and modelled fog image at reference time is less than ±30 minutes in 68% of the total number of fog-covered pixels and therefore matches the accuracy of local tephigram methods. However, for individual pixels a time error of up to ±60 minutes occurs for the time of fog clearance. Time errors are probably mainly due to an inaccurate estimation of fog thickness.

Animal or plant: which is the better fog water collector?

Science.gov (United States)

Nørgaard, Thomas; Ebner, Martin; Dacke, Marie

2012-01-01

Occasional fog is a critical water source utilised by plants and animals in the Namib Desert. Fog basking beetles (Onymacris unguicularis, Tenebrionidae) and Namib dune bushman grass (Stipagrostris sabulicola, Poaceae) collect water directly from the fog. While the beetles position themselves optimally for fog water collection on dune ridges, the grass occurs predominantly at the dune base where less fog water is available. Differences in the fog-water collecting abilities in animals and plants have never been addressed. Here we place beetles and grass side-by-side in a fog chamber and measure the amount of water they collect over time. Based on the accumulated amount of water over a two hour period, grass is the better fog collector. However, in contrast to the episodic cascading water run-off from the grass, the beetles obtain water in a steady flow from their elytra. This steady trickle from the beetles' elytra to their mouth could ensure that even short periods of fog basking--while exposed to predators--will yield water. Up to now there is no indication of specialised surface properties on the grass leafs, but the steady run-off from the beetles could point to specific property adaptations of their elytra surface.

Animal or plant: which is the better fog water collector?

Directory of Open Access Journals (Sweden)

Thomas Nørgaard

Full Text Available Occasional fog is a critical water source utilised by plants and animals in the Namib Desert. Fog basking beetles (Onymacris unguicularis, Tenebrionidae and Namib dune bushman grass (Stipagrostris sabulicola, Poaceae collect water directly from the fog. While the beetles position themselves optimally for fog water collection on dune ridges, the grass occurs predominantly at the dune base where less fog water is available. Differences in the fog-water collecting abilities in animals and plants have never been addressed. Here we place beetles and grass side-by-side in a fog chamber and measure the amount of water they collect over time. Based on the accumulated amount of water over a two hour period, grass is the better fog collector. However, in contrast to the episodic cascading water run-off from the grass, the beetles obtain water in a steady flow from their elytra. This steady trickle from the beetles' elytra to their mouth could ensure that even short periods of fog basking--while exposed to predators--will yield water. Up to now there is no indication of specialised surface properties on the grass leafs, but the steady run-off from the beetles could point to specific property adaptations of their elytra surface.

Fog composition at Baengnyeong Island in the eastern Yellow Sea: detecting markers of aqueous atmospheric oxidations

Science.gov (United States)

Boris, A. J.; Lee, T.; Park, T.; Choi, J.; Seo, S. J.; Collett, J. L., Jr.

2016-01-01

Samples of fog water were collected at Baengnyeong Island (BYI) in the Yellow Sea during the summer of 2014. The most abundant chemical species in the fog water were NH4+ (mean of 2220 µM), NO3- (1260 µM), SO4-2 (730 µM), and Na+ (551 µM), with substantial contributions from other species consistent with marine and biomass burning influence on some dates. The pH of the samples ranged between 3.48 and 5.00, with a mean of 3.94, intermediate within pH values of fog/cloud water reported previously in Southeast Asia. Back trajectories (72 h) showed that high relative humidity ( > 80 %) was encountered upwind of the sampling site by all but one of the sampled air masses, and that the fog composition at BYI can be impacted by several different source regions, including the Sea of Japan, southeastern China, northeastern China, and the East China Sea. Sulfur in the collected fog was highly oxidized: low S(IV) concentrations were measured (mean of 2.36 µM) in contrast to SO4-2 and in contrast to fog/cloud S(IV) concentrations from pollutant source regions; organosulfate species were also observed and were most likely formed through aging of mainly biogenic volatile organic compounds. Low-molecular-mass organic acids were major contributors to total organic carbon (TOC; 36-69 %), comprising a fraction of TOC at the upper end of that seen in fogs and clouds in other polluted environments. Large contributions were observed from not only acetic and formic acids but also oxalic, succinic, maleic, and other organic acids that can be produced in aqueous atmospheric organic processing (AAOP) reactions. These samples of East Asian fog water containing highly oxidized components represent fog downwind of pollutant sources and can provide new insight into the fate of regional emissions. In particular, these samples demonstrate the result of extensive photochemical aging during multiday transport, including oxidation within wet aerosols and fogs.

Smart Fog: Fog Computing Framework for Unsupervised Clustering Analytics in Wearable Internet of Things

OpenAIRE

Borthakur, Debanjan; Dubey, Harishchandra; Constant, Nicholas; Mahler, Leslie; Mankodiya, Kunal

2017-01-01

The increasing use of wearables in smart telehealth generates heterogeneous medical big data. Cloud and fog services process these data for assisting clinical procedures. IoT based ehealthcare have greatly benefited from efficient data processing. This paper proposed and evaluated use of low resource machine learning on Fog devices kept close to the wearables for smart healthcare. In state of the art telecare systems, the signal processing and machine learning modules are deployed in the clou...

The testing of sanitizers efficacy to enterococci adhered on glass surfaces

Directory of Open Access Journals (Sweden)

Margita Čanigová

2015-08-01

Full Text Available The aim of this work was to test the ability of 6 strains of enterococci to adhere on glass surfaces in environment with different content of milk residues and then to evaluate efficacy of 2 commercial sanitizers (alkaline and acidic used in milk production. Tested enterococci were isolated from milk, dairy products and from rinse water after sanitation milking machine. Suspension of enterococci (8 log CFU.ml-1 was prepared in phosphate buffered saline (PBS, PBS with content 0.1% and 1% of skimmed reconstituted milk. Glass plates were immersed into bacterial suspension for 1 h at 37 °C. The number of enterococci adhered on glass surface in PBS achieved an average value 3.47 log CFU.mm-2, in PBS with 0.1% of milk 2.90 CFU.mm-2, in PBS with 1% of milk 2.63 CFU.mm-2. Differences between the tested files were not statistically significant (p >0.05. In the second part of work the glass plates with adhered enterococci were exposed to the effect of alkaline sanitizer (on basis of NaOH and NaClO, respectively acidic sanitizer (on basis of H3PO4. Sanitation solutions were prepared and tested according to manufacturer recommendations (concentration 0.25%, contact time 20 min, temperature   20 °C. Alkaline sanitation solution was 100% effective against all tested enterococci regardless to content of milk residues in environment. Acidic sanitation solution was 100% effective only against E. faecalisD (isolated from rinse water after sanitation. Average value of reduction of enterococci with acidic sanitation solution, which were on glass plates in environment PBS was 2.84 CFU.mm-2, in PBS with 0.1% of milk was 2.45 CFU.mm-2 and in PBS with 1% of milk was 2.16 CFU.mm-2. It can be concluded, that increase of milk residues in environment decrease the adhesion of enterococci on glass surface, but also effectiveness of acidic sanitation solution.

The use of detergents and sanitizers in dairy farm sanitation--an updated perspective.

Science.gov (United States)

Gilbert, P H

1982-06-01

Raw milk quality in South Africa is poor and standard plate counts in the millions per ml are common. This is largely due to inefficient cleaning and sanitizing of dairy equipment. The basic constituents in milk are described and various soils are classified as soluble in water, alkali, acid, solvent or surfactant or as insoluble. The importance of water quality is highlighted and the influence of mineral salts on soil deposition described. Dairy detergents are broadly classified as alkaline or acid, the former being most effective against fatty and proteinaceous soils and the latter effective against mineral salts. Typical detergent ingredients and their properties are described. Chlorine is incorporated into alkaline detergents not as a sanitizing agent, but as a peptizing agent to aid in protein soil removal. At high pH values the antimicrobial activity of chlorine is greatly diminished. The use of a daily acidified rinse (pH 3,0-5,0) is preferred to the periodic acid wash, since the acid rinse prevents mineral deposition rather than removing accumulated milkstone. All cleaning programmes follow the same fundamental steps--Pre-rinse (40-50 degrees C), wash (60-70 degrees C), rinse (pH 3,0-5,0) and sanitize (25 ppm iodine and 100 ppm chlorine). Farms following such a programme are able to achieve Standard Plate Counts of less than 10,000/ml and coliform counts of less than 10/ml for raw milk.

Trapping fresh sea breeze in desert? Health status of Camanchaca, Atacama's fog.

Science.gov (United States)

Bonnail, Estefanía; Cunha Lima, Ricardo; Martínez Turrieta, Gladys

2018-05-24

Water fog composition was investigated at a fog harvesting installation in the coast of Atacama (North Chile). Chañaral is historically affected by mining contamination discharges. Hydro-chemical characterization of fog water from top of the mountain (where capture installation is located) and at the bottom of the mountain (after vertical transportation where an aquaponic system is located) revealed many compositional differences that compromise the use of water. High acidity and high concentrations in Cu and As in water collected on top of the mountain were found; meanwhile, acidity and Cu decreased, and As levels overpassed the drinking water standards after the vertical transportation. Collected data was assessed according to national and international regulatory standards, neutralization factors (NF), sodium adsorption ratio (SAR), and ion ratios to determine origin of contamination and suitability of destined for human consumption, irrigation, or aquaculture purposes.

Crowd Sensing-Enabling Security Service Recommendation for Social Fog Computing Systems.

Science.gov (United States)

Wu, Jun; Su, Zhou; Wang, Shen; Li, Jianhua

2017-07-30

Fog computing, shifting intelligence and resources from the remote cloud to edge networks, has the potential of providing low-latency for the communication from sensing data sources to users. For the objects from the Internet of Things (IoT) to the cloud, it is a new trend that the objects establish social-like relationships with each other, which efficiently brings the benefits of developed sociality to a complex environment. As fog service become more sophisticated, it will become more convenient for fog users to share their own services, resources, and data via social networks. Meanwhile, the efficient social organization can enable more flexible, secure, and collaborative networking. Aforementioned advantages make the social network a potential architecture for fog computing systems. In this paper, we design an architecture for social fog computing, in which the services of fog are provisioned based on "friend" relationships. To the best of our knowledge, this is the first attempt at an organized fog computing system-based social model. Meanwhile, social networking enhances the complexity and security risks of fog computing services, creating difficulties of security service recommendations in social fog computing. To address this, we propose a novel crowd sensing-enabling security service provisioning method to recommend security services accurately in social fog computing systems. Simulation results show the feasibilities and efficiency of the crowd sensing-enabling security service recommendation method for social fog computing systems.

Characterisation of FOGs in grease trap waste from the processing of chickens in Thailand.

Science.gov (United States)

Nitayapat, Nuttakan; Chitprasert, Pakamon

2014-06-01

Industrial firms that kill and process chickens generate wastewater that contains fat, oil, and grease (FOG). The FOGs are located in the fatty waste that is collected by floatation in grease traps. Chemical and physical characterisation of FOGs would provide useful information that would help in the development of methods designed to decrease the extent of pollution caused by disposal of the waste and to utilise commercially some of its lipid constituents. Employing these methods would enhance the profitability and competitive potential of these commercial organisations. Samples of grease trap waste from 14 firms in central Thailand have been examined. Due to the very different schemes of waste management employed by these firms, the physical appearance of their fatty wastes showed considerable variation. The chemical and physical properties of the FOGs present in these wastes showed considerable variation also. Large amounts of free fatty acids (10-70% as oleic acid) were detected in most of the 14 wastes and palmitic, cis-9-oleic, cis,cis-9,12-linoleic, stearic, and palmitoleic acids were the predominant species of free and esterified acids. Most of the FOGs were solid at temperatures below 40 °C. Many of them contained traces of heavy metals (Cu and Pb) and some contained traces of the pesticides dimethoate and cypermethrin. The content of these potentially hazardous substances would have to be considered very carefully before discarding the fatty wastes and during the development of methods designed to isolate their potentially profitable lipid constituents. Copyright © 2013 Elsevier Ltd. All rights reserved.

New method for evaluating high-quality fog protective coatings

Science.gov (United States)

Czeremuszkin, Grzegorz; Latreche, Mohamed; Mendoza-Suarez, Guillermo

2011-05-01

Fogging is commonly observed when humid-warm air contacts the cold surface of a transparent substrate, i.e. eyewear lenses, making the observed image blurred and hazy. To protect from fogging, the lens inner surfaces are protected with Anti-Fog coatings, which render them hydrophilic and induce water vapor condensation as a smooth, thin and invisible film, which uniformly flows down on the lens as the condensation progresses. Coatings differ in protection level, aging kinetics, and susceptibility to contamination. Some perform acceptably in limited conditions, beyond which the condensing water film becomes unstable, nonuniform, and scatters light or shows refractory distortions, both affecting the observed image. Quantifying the performance of Anti-Fog coated lenses is difficult: they may not show classical fogging and the existing testing methods, based on fog detection, are therefore inapplicable. The presented method for evaluating and quantifying AF properties is based on characterizing light scattering on lenses exposed to controlled humidity and temperature. Changes in intensity of laser light scattered at low angles (1, 2 4 and 8 degrees), observed during condensation of water on lenses, provide information on the swelling of Anti-Fog coatings, formation of uniform water film, going from an unstable to a steady state, and on the coalescence of discontinuous films. Real time observations/measurements allow for better understanding of factors controlling fogging and fog preventing phenomena. The method is especially useful in the development of new coatings for military-, sport-, and industrial protective eyewear as well as for medical and automotive applications. It allows for differentiating between coatings showing acceptable, good, and excellent performance.

A Fine-Grained and Privacy-Preserving Query Scheme for Fog Computing-Enhanced Location-Based Service.

Science.gov (United States)

Yang, Xue; Yin, Fan; Tang, Xiaohu

2017-07-11

Location-based services (LBS), as one of the most popular location-awareness applications, has been further developed to achieve low-latency with the assistance of fog computing. However, privacy issues remain a research challenge in the context of fog computing. Therefore, in this paper, we present a fine-grained and privacy-preserving query scheme for fog computing-enhanced location-based services, hereafter referred to as FGPQ. In particular, mobile users can obtain the fine-grained searching result satisfying not only the given spatial range but also the searching content. Detailed privacy analysis shows that our proposed scheme indeed achieves the privacy preservation for the LBS provider and mobile users. In addition, extensive performance analyses and experiments demonstrate that the FGPQ scheme can significantly reduce computational and communication overheads and ensure the low-latency, which outperforms existing state-of-the art schemes. Hence, our proposed scheme is more suitable for real-time LBS searching.

Crowd Sensing-Enabling Security Service Recommendation for Social Fog Computing Systems

Directory of Open Access Journals (Sweden)

Jun Wu

2017-07-01

Full Text Available Fog computing, shifting intelligence and resources from the remote cloud to edge networks, has the potential of providing low-latency for the communication from sensing data sources to users. For the objects from the Internet of Things (IoT to the cloud, it is a new trend that the objects establish social-like relationships with each other, which efficiently brings the benefits of developed sociality to a complex environment. As fog service become more sophisticated, it will become more convenient for fog users to share their own services, resources, and data via social networks. Meanwhile, the efficient social organization can enable more flexible, secure, and collaborative networking. Aforementioned advantages make the social network a potential architecture for fog computing systems. In this paper, we design an architecture for social fog computing, in which the services of fog are provisioned based on “friend” relationships. To the best of our knowledge, this is the first attempt at an organized fog computing system-based social model. Meanwhile, social networking enhances the complexity and security risks of fog computing services, creating difficulties of security service recommendations in social fog computing. To address this, we propose a novel crowd sensing-enabling security service provisioning method to recommend security services accurately in social fog computing systems. Simulation results show the feasibilities and efficiency of the crowd sensing-enabling security service recommendation method for social fog computing systems.

Crowd Sensing-Enabling Security Service Recommendation for Social Fog Computing Systems

Science.gov (United States)

Wu, Jun; Su, Zhou; Li, Jianhua

2017-01-01

Fog computing, shifting intelligence and resources from the remote cloud to edge networks, has the potential of providing low-latency for the communication from sensing data sources to users. For the objects from the Internet of Things (IoT) to the cloud, it is a new trend that the objects establish social-like relationships with each other, which efficiently brings the benefits of developed sociality to a complex environment. As fog service become more sophisticated, it will become more convenient for fog users to share their own services, resources, and data via social networks. Meanwhile, the efficient social organization can enable more flexible, secure, and collaborative networking. Aforementioned advantages make the social network a potential architecture for fog computing systems. In this paper, we design an architecture for social fog computing, in which the services of fog are provisioned based on “friend” relationships. To the best of our knowledge, this is the first attempt at an organized fog computing system-based social model. Meanwhile, social networking enhances the complexity and security risks of fog computing services, creating difficulties of security service recommendations in social fog computing. To address this, we propose a novel crowd sensing-enabling security service provisioning method to recommend security services accurately in social fog computing systems. Simulation results show the feasibilities and efficiency of the crowd sensing-enabling security service recommendation method for social fog computing systems. PMID:28758943

Fog lamp regulation as a safety measure to reduce risk in fog conditions.

NARCIS (Netherlands)

Oppe, S.

1992-01-01

This short note summarizes the relevant aspects for a decision concerning the fog lamp use regulation. Most motorway accidents in the Netherlands took place in fog conditions in the early morning hours. The safety problem in fog conditions is a serious problem caused by bad driving behaviour. The

Attachment of Escherichia coli O157:H7 in ground beef to meat grinders and survival after sanitation with chlorine and peroxyacetic acid.

Science.gov (United States)

Farrell, B L; Ronner, A B; Wong, A C

1998-07-01

The potential for transfer of Escherichia coli O157:H7 from contaminated ground beef to grinding equipment and the inactivation of attached cells during cleaning and sanitizing was examined. Chub-packed ground beef with lean:fat ratios of 75:25, 80:20 or 90:10 was inoculated with 6 log CFU/g or 2 log CFU/g E. coli O157:H7 strain FRIK 910. Samples were consecutively ground in a Hobart meat grinder with stainless steel (SS) chips (1 cm2) glued to the auger housing. Chips were harvested after grinding, detergent washing with or without manual scrubbing and rinsing, sanitizing in a chlorine or peroxyacetic acid sanitizer, and overnight storage. Survival of E. coli O157:H7 was evaluated both by plate count and enrichment in trypticase soy broth. Approximately 3 to 4 log CFU/cm2 were attached to the SS after grinding with all three fat contents. After washing and sanitizing in a chlorine or peroxyacetic acid sanitizer, viable bacteria were infrequently recovered by plate count. Enrichment of chips resulted in a higher survival rate with both sanitizing treatments, indicating that cell numbers below the limit of detection (5 CFU/cm2) or potentially injured organisms remained on the surface. Manual scrubbing during the washing step reduced the recovery rate. The scrubbing step also increased the number of passing scores assigned using an ATP bioluminescence assay of total residual soil on the chips sanitized in chlorine. The overall results indicate that plate counts alone may not be a reliable indicator of sanitation efficacy and may be validated by enrichment assay.

Fog Computing: An Overview of Big IoT Data Analytics

Directory of Open Access Journals (Sweden)

Muhammad Rizwan Anawar

2018-01-01

Full Text Available A huge amount of data, generated by Internet of Things (IoT, is growing up exponentially based on nonstop operational states. Those IoT devices are generating an avalanche of information that is disruptive for predictable data processing and analytics functionality, which is perfectly handled by the cloud before explosion growth of IoT. Fog computing structure confronts those disruptions, with powerful complement functionality of cloud framework, based on deployment of micro clouds (fog nodes at proximity edge of data sources. Particularly big IoT data analytics by fog computing structure is on emerging phase and requires extensive research to produce more proficient knowledge and smart decisions. This survey summarizes the fog challenges and opportunities in the context of big IoT data analytics on fog networking. In addition, it emphasizes that the key characteristics in some proposed research works make the fog computing a suitable platform for new proliferating IoT devices, services, and applications. Most significant fog applications (e.g., health care monitoring, smart cities, connected vehicles, and smart grid will be discussed here to create a well-organized green computing paradigm to support the next generation of IoT applications.

Fog modelling during the ParisFog campaign: predictive approach and spatial heterogeneity effect

International Nuclear Information System (INIS)

Zhang, Xiaojing

2010-01-01

In fog or low clouds modeling, the accurate comprehension of the interaction among the turbulence, the microphysics and the radiation is still an important issue in improvement of numerical prediction quality. The improvement of fog modeling is important both in forecasting in transportation and in industrial domain by reason of their discharges atmospheric (cooling tower, smog...). The 1D version of Code-Saturne has been used for the numerical simulation with the observational data from the ParisFog campaign, which took place at the SIRTA site during 2006-2007 winter. The comparison between the simulation and observation shows that the model is able to reproduce correctly the fog evolution from its formation to its dissipation. The sensitivity analysis of the behavior of the different parameterizations shows that the fog dynamic is sensible to the turbulence closure, the fog water content to the sedimentation processes and the fog droplet spectrum to the nucleation scheme. The performance of a long-period simulation in forecasting mode shows that the robustness of the model and the contribution of the coupling by nudging and a mesoscale model in 36 hours advance. The 3D version of Code-Saturne allows us to study the effect of spatial heterogeneity on the fog formation. Firstly, the simulations have been performed within a homogeneous horizontal domain with RANS mode. And then, the surface roughness in different type of surface and the building area will be taken into account. (author) [fr

Fog composition at Baengnyeong Island in the eastern Yellow Sea: detecting markers of aqueous atmospheric oxidations

Directory of Open Access Journals (Sweden)

A. J. Boris

2016-01-01

Full Text Available Samples of fog water were collected at Baengnyeong Island (BYI in the Yellow Sea during the summer of 2014. The most abundant chemical species in the fog water were NH4+ (mean of 2220 µM, NO3− (1260 µM, SO4−2 (730 µM, and Na+ (551 µM, with substantial contributions from other species consistent with marine and biomass burning influence on some dates. The pH of the samples ranged between 3.48 and 5.00, with a mean of 3.94, intermediate within pH values of fog/cloud water reported previously in Southeast Asia. Back trajectories (72 h showed that high relative humidity ( >  80 % was encountered upwind of the sampling site by all but one of the sampled air masses, and that the fog composition at BYI can be impacted by several different source regions, including the Sea of Japan, southeastern China, northeastern China, and the East China Sea. Sulfur in the collected fog was highly oxidized: low S(IV concentrations were measured (mean of 2.36 µM in contrast to SO4−2 and in contrast to fog/cloud S(IV concentrations from pollutant source regions; organosulfate species were also observed and were most likely formed through aging of mainly biogenic volatile organic compounds. Low-molecular-mass organic acids were major contributors to total organic carbon (TOC; 36–69 %, comprising a fraction of TOC at the upper end of that seen in fogs and clouds in other polluted environments. Large contributions were observed from not only acetic and formic acids but also oxalic, succinic, maleic, and other organic acids that can be produced in aqueous atmospheric organic processing (AAOP reactions. These samples of East Asian fog water containing highly oxidized components represent fog downwind of pollutant sources and can provide new insight into the fate of regional emissions. In particular, these samples demonstrate the result of extensive photochemical aging during multiday transport, including oxidation within wet aerosols and

The Torbay fog facility

International Nuclear Information System (INIS)

Anon.

1998-01-01

A series of lighting sources are needed to help helicopters in their approaches to offshore oil platforms. The Torbay fog facility in Newfoundland was created in May 1998 and has been instrumental in studying different light sources. The facility has been used for fog characterization studies to determine the transmission of various light sources through fog up to a distance of 980 meters and correlating this with fog droplet size and concentration. The most cost effective method of increasing visibility is through high intensity searchlights. In this study, a 150 watt searchlight was set up on the south side of Torbay Bay and fog droplet size and concentration were measured. The main objective of the study was to characterize fog and precipitation (rain and snow) to enable daylight approaches to be made to the Hibernia platform in low visibility conditions. Different methods of measuring visibility were investigated to define a suitable sensor/detector which, when installed on the Hibernia platform, will allow a prediction of visibility to be made for flight operational purposes. 2 figs

water, sanitation and hygiene in community- based care

African Journals Online (AJOL)

PUBLICATIONS1

in home-based care and the implications on people living with HIV/AIDS/TB, their ... Data was collected using participant observation of care-giving activities; ... this affects the work of CHW. ..... Using water and sanitation as an entry point.

Organic compounds in radiation fogs in Davis (California)

Science.gov (United States)

Herckes, Pierre; Hannigan, Michael P.; Trenary, Laurie; Lee, Taehyoung; Collett, Jeffrey L.

New stainless steel active fogwater collectors were designed and used in Davis (CA, USA) to collect fogwater for the speciation of organic matter. Organic compounds in fog samples were extracted by liquid-liquid extraction and analyzed by gas chromatography coupled to mass spectrometry. Numerous organic compounds, including various alkanes, polycyclic aromatic hydrocarbons (PAH) and alkanoic acids, have been identified in the fogwater samples. Higher molecular weight (MW) compounds are preferentially associated with an insoluble phase inside the fog drops, whereas lower molecular weight and more polar compounds are found predominantly in the dissolved phase. Concentrations in the dissolved phase were sometimes much higher than estimated by the compounds' aqueous solubilities.

Aerosol Particle Processing and Removal by Fogs: Observations in Chemically Heterogeneous Central California Radiation Fogs

International Nuclear Information System (INIS)

Collett, Jeffrey L.; Sherman, D. Eli; Moore, Katharine F.; Hannigan, Michael P.; Lee, Taehyoung

2001-01-01

Fog composition and deposition fluxes of fog water and fog solutes were measured in six radiation fog events in San Joaquin Valley, California during winter 1998/1999. Measurements made at 2 hr intervals with 0.30 m 2 and 0.06 m 2 Teflondeposition plates yielded excellent reproducibility(relative standard deviations of 3.8-6.0%) for water, nitrate, sulfate and ammonium. Water fluxes measured at 5 min intervals with a recording balance agreed well with the deposition plate measurements before 8:00 AM. After 8:00 AMevaporation proved problematic. The average deposition velocity from the study for fog nitrate(3.8 cm s -1 ) was less than those for fogsulfate (5.1 cm s -1 ) and ammonium (6.7 cms -1 ). All three species generally exhibited smaller deposition velocities than fog water. The species dependent trend in deposition velocities was consistent with preferential enrichment of these species in small fog drops (nitrate > sulfate> ammonium)

Marine sources influence fog bioaerosol composition in Namibia and Maine

Science.gov (United States)

Evans, S. E.; Dueker, E.; Logan, J. R. V.; Weathers, K. C.

2017-12-01

Organic aerosol particles act as condensation nuclei for fogs and clouds (CCN) and are main determinants of fog evolution, chemical processing, and overall aerosol-fog-cloud interactions. Recent work has confirmed the presence of marine bioaerosols, but little is known about their sources, transport, taxonomic diversity or viability. The few studies that have characterized bioaerosols in fog have been limited to culture-based approaches that capture only a fraction of microbial diversity. We characterized fungal and bacterial communities in the fog in two iconic fog systems, the Coast of Maine (USA) and the Namib Desert (Namibia). The biology of fog in both systems was diverse and distinct, by geography, from dry aerosols, and from local sources. The local environment had a dominant influence on fog in both the Namib and Maine; in particular, the biology of fog in Maine, which was collected near the coast, was more similar to microbial communities from the ocean surface. In both systems, differences between pre- and post-fog aerosol communities suggest that fog events can significantly alter microbial aerosol diversity and composition. This insight into the microbial composition of fog indicates that its origin and frequency has the potential to influence the number and diversity of microorganisms that settle in a given environment, and the composition of microbial aerosol communities in ambient or clear conditions. Here we suggest that fog microbes can possess specific traits that enhance nucleation, altering the transport and deposition of marine- and soil-derived organic matter in terrestrial systems.

Spatial and Temporal Analysis of Winter Fog Episodes over South Asia by exploiting ground-based and satellite observations

Science.gov (United States)

Fahim Khokhar, Muhammad; Yasmin, Naila; Zaib, Naila; Murtaza, Rabia; Noreen, Asma; Ishtiaq, Hira; Khayyam, Junaid; Panday, Arnico

2016-04-01

The South Asian region in general and the Indo-Gangetic Plains (IGP) in particular hold about 1/6th of the world's population and is considered as one of the major hotspots with increasing air pollution. Due to growing population and globalization, South Asia is experiencing high transformations in the urban and industrial sectors. Fog is one of the meteorological/environmental phenomena which can generate significant social and economic problems especially havoc to air and road traffic. Meteorological stations provide information about the fog episodes only on the basis of point observation. Continuous monitoring as well as a spatially coherent picture of fog distribution can only be possible through the use of satellite imagery. Current study focus on winter fog episodes over South Asian region using Moderate Resolution Image Spectrometer (MODIS) Level 2 Terra Product and other MODIS Aerosol Product in addition to ground-based sampling and AERONET measurements. MODIS Corrected Reflectance RGBs are used to analyse the spatial extent of fog over study area. MOD04 level 2 Collection 6 data is used to study aerosol load and distribution which are further characterised by using aerosol type land product of MODIS. In order to study the variation of ground based observations from satellite data MODIS, AERONET and high volume air Sampler were used. Main objective of this study was to explore the spatial extent of fog, its causes and to analyse the Aerosol Optical Depth (AOD) over South Asia with particular focus over Indo-Gangetic Plains (IGP). Current studies show a descent increase in AOD from past few decades over South Asia and is contributing to poor air quality in the region due to growing population, urbanization, and industrialization. Smoke and absorbing aerosol are major constituent of fog over South Asia. Furthermore, winter 2014-15 extended span of Fog was also observed over South Asia. A significant correlation between MODIS (AOD) and AERONET Station (AOD

A review of observations of organic matter in fogs and clouds: Origin, processing and fate

Science.gov (United States)

Herckes, Pierre; Valsaraj, Kalliat T.; Collett, Jeffrey L.

2013-10-01

While fog and cloud composition has been studied for decades, most of the research was limited to inorganic species and fog acidity. Recently the focus has shifted towards organic matter in the atmospheric aqueous phase of fogs and clouds: its origin, reactivity and fate. An impressive number of fog and cloud chemistry observational studies have been performed over the last decade throughout the world. In the present work we will review the state of knowledge of atmospheric organic matter processing by fogs, with a focus on field observations. We start by reviewing observational studies in general and then discuss our knowledge on the occurrence of organic matter in fogs, its solubility, characterization and molecular speciation. Organic carbon concentrations can vary widely from approximately 1 mg C/L in remote marine environments to more than 100 mg C/L in polluted radiation fogs, accounting for a substantial part of fogwater solutes. The carbonaceous material can enter the droplets from the gas and particle phase and the scavenging behavior of fogs will be detailed. Observational studies showed evidence of aqueous phase transformation of organic material, in particular secondary organic aerosol (SOA) generation, in fog. Recent observations of biological material in fog suggest also an impact of biological processing within the droplets on fog organic matter. The review will end with a discussion of the impact of fog on the deposition fluxes of organic material and hence its atmospheric lifetime.

A field study on chemistry, S(IV) oxidation rates and vertical transport during fog conditions

Science.gov (United States)

Joos, F.; Baltensperger, U.

An extensive fog study was carried out in the central plateu of Switzerland. Ninety-seven fog samples were collected along with aerosol filter and cascade impactor samples, and measurements of O 3, SO 2, NO, NO x, PAN, temperature, and wind speed and direction. Maximum levels in fogwater were 4.3, 4.4., 0.033, 1.7, 0.5, 0.024 and 9.2 mmol ℓ -1 for Cl -, NO 3-, NO 2-, SO 42-, S(IV), oxalate and NH 4+, respectively. pH varied between 2.9 and 7.1. Sixteen additional elements were determined in the fog samples by ICP. The sum of the concentrations of SO 42- and S(IV) agreed very with the total sulfur concentration as determined by ICP. A substantial excess of S(IV) (up to 0.2 mmol ℓ -1) compared to Henry and acid-base equilibrium calculations was found, which can probably be attributed to complex formations with aldehydes. S(IV) oxidation rates of up to 650 nmol ℓ -1 s -1 with ozone and of up to 100 nmol ℓ -1 s -1 with NO 2 were calculated. S(IV) oxidation due to PAN, NO 2- and Fe(III) was of minor importance. A substantial fraction of the major ions was present in the intersitial aerosol (aerosol particles < 4 μm) even during fog conditions. High correlations were found for NH 4+, NO 32-. From their ratios in the fog water and the aerosol (< 4 μm) it could be concluded that at least 40% of NO 3- and 20% of NH 4+ in fog water was due to gas phase scavenging. Increasing concentrations in fog water were found during fog dissipation. Concentrations decreased with increasing height. A vertical transport model including turbulent diffusion and droplet sedimentation is introduced, which matches the experimental data of this vertical profile.

Secure Data Access Control for Fog Computing Based on Multi-Authority Attribute-Based Signcryption with Computation Outsourcing and Attribute Revocation.

Science.gov (United States)

Xu, Qian; Tan, Chengxiang; Fan, Zhijie; Zhu, Wenye; Xiao, Ya; Cheng, Fujia

2018-05-17

Nowadays, fog computing provides computation, storage, and application services to end users in the Internet of Things. One of the major concerns in fog computing systems is how fine-grained access control can be imposed. As a logical combination of attribute-based encryption and attribute-based signature, Attribute-based Signcryption (ABSC) can provide confidentiality and anonymous authentication for sensitive data and is more efficient than traditional "encrypt-then-sign" or "sign-then-encrypt" strategy. Thus, ABSC is suitable for fine-grained access control in a semi-trusted cloud environment and is gaining more and more attention recently. However, in many existing ABSC systems, the computation cost required for the end users in signcryption and designcryption is linear with the complexity of signing and encryption access policy. Moreover, only a single authority that is responsible for attribute management and key generation exists in the previous proposed ABSC schemes, whereas in reality, mostly, different authorities monitor different attributes of the user. In this paper, we propose OMDAC-ABSC, a novel data access control scheme based on Ciphertext-Policy ABSC, to provide data confidentiality, fine-grained control, and anonymous authentication in a multi-authority fog computing system. The signcryption and designcryption overhead for the user is significantly reduced by outsourcing the undesirable computation operations to fog nodes. The proposed scheme is proven to be secure in the standard model and can provide attribute revocation and public verifiability. The security analysis, asymptotic complexity comparison, and implementation results indicate that our construction can balance the security goals with practical efficiency in computation.

Vertical distribution of microphysical properties in radiation fogs - A case study

Science.gov (United States)

Egli, S.; Maier, F.; Bendix, J.; Thies, B.

2015-01-01

The present study investigates the validity of a theoretical liquid water content (LWC) profile in fog layers currently used for satellite based ground fog detection, with a special focus on the temporal dynamics during fog life cycle. For this purpose, LWC profiles recorded during two different fog events by means of a tethered balloon borne measurement system are presented and discussed. The results indicate a good agreement in trend and gradient between measured and theoretical LWC profiles during the mature stage of the fog life cycle. The profile obtained during the dissipation stage shows less accordance with the theoretical profile. To improve the agreement between theoretical and measured LWC profiles, the evolutionary stages during the fog life cycle should be incorporated. However, the variability within the prenoted measurements points out that more LWC profiles during a great variety of different fog events have to be collected for a well-justified adaptation of the theoretical LWC profile, considering fog life cycle phases in the future. In general, this underlines the existing knowledge gap regarding the vertical distribution of microphysical properties in natural fogs.

Fog water collection effectiveness: Mesh intercomparisons

Science.gov (United States)

Fernandez, Daniel; Torregrosa, Alicia; Weiss-Penzias, Peter; Zhang, Bong June; Sorensen, Deckard; Cohen, Robert; McKinley, Gareth; Kleingartner, Justin; Oliphant, Andrew; Bowman, Matthew

2018-01-01

To explore fog water harvesting potential in California, we conducted long-term measurements involving three types of mesh using standard fog collectors (SFC). Volumetric fog water measurements from SFCs and wind data were collected and recorded in 15-minute intervals over three summertime fog seasons (2014–2016) at four California sites. SFCs were deployed with: standard 1.00 m2 double-layer 35% shade coefficient Raschel; stainless steel mesh coated with the MIT-14 hydrophobic formulation; and FogHa-Tin, a German manufactured, 3-dimensional spacer fabric deployed in two orientations. Analysis of 3419 volumetric samples from all sites showed strong relationships between mesh efficiency and wind speed. Raschel mesh collected 160% more fog water than FogHa-Tin at wind speeds less than 1 m s–1 and 45% less for wind speeds greater than 5 m s–1. MIT-14 coated stainless-steel mesh collected more fog water than Raschel mesh at all wind speeds. At low wind speeds of wind speeds of 4–5 m s–1, it collected 41% more. FogHa-Tin collected 5% more fog water when the warp of the weave was oriented vertically, per manufacturer specification, than when the warp of the weave was oriented horizontally. Time series measurements of three distinct mesh across similar wind regimes revealed inconsistent lags in fog water collection and inconsistent performance. Since such differences occurred under similar wind-speed regimes, we conclude that other factors play important roles in mesh performance, including in-situ fog event and aerosol dynamics that affect droplet-size spectra and droplet-to-mesh surface interactions.

Fog water collection effectiveness: Mesh intercomparisons

Science.gov (United States)

Fernandez, Daniel; Torregrosa, Alicia; Weiss-Penzias, Peter; Zhang, Bong June; Sorensen, Deckard; Cohen, Robert; McKinley, Gareth; Kleingartner, Justin; Oliphant, Andrew; Bowman, Matthew

2018-01-01

To explore fog water harvesting potential in California, we conducted long-term measurements involving three types of mesh using standard fog collectors (SFC). Volumetric fog water measurements from SFCs and wind data were collected and recorded in 15-minute intervals over three summertime fog seasons (2014–2016) at four California sites. SFCs were deployed with: standard 1.00 m2 double-layer 35% shade coefficient Raschel; stainless steel mesh coated with the MIT-14 hydrophobic formulation; and FogHa-Tin, a German manufactured, 3-dimensional spacer fabric deployed in two orientations. Analysis of 3419 volumetric samples from all sites showed strong relationships between mesh efficiency and wind speed. Raschel mesh collected 160% more fog water than FogHa-Tin at wind speeds less than 1 m s–1 and 45% less for wind speeds greater than 5 m s–1. MIT-14 coated stainless-steel mesh collected more fog water than Raschel mesh at all wind speeds. At low wind speeds of steel mesh collected 3% more and at wind speeds of 4–5 m s–1, it collected 41% more. FogHa-Tin collected 5% more fog water when the warp of the weave was oriented vertically, per manufacturer specification, than when the warp of the weave was oriented horizontally. Time series measurements of three distinct mesh across similar wind regimes revealed inconsistent lags in fog water collection and inconsistent performance. Since such differences occurred under similar wind-speed regimes, we conclude that other factors play important roles in mesh performance, including in-situ fog event and aerosol dynamics that affect droplet-size spectra and droplet-to-mesh surface interactions.

Problems, control, and treatment of fat, oil, and grease (FOG): a review.

Science.gov (United States)

Husain, Iman A F; Alkhatib, Ma'an Fahmi; Jammi, Mohamed Saedi; Mirghani, Mohamed E S; Bin Zainudin, Zaki; Hoda, Asif

2014-01-01

Presence of fat, oil, and grease (FOG) in wastewater is an ever-growing concern to municipalities and solid-waste facility operators. FOG enters the sewer system from restaurants, residences, and industrial food facilities. Its release into the sewer system results in a continuous build-up that causes eventual blockage of sewer pipes. Several researchers have investigated FOG deposition based on the local conditions of sewers and lifestyle. This paper attempts to review the physical and chemical characteristics of FOG, sources of FOG, and potential chemical and biological reactions of FOG. The effect of the aforementioned factors on the FOG-deposition mechanism is also discussed. Moreover, insight into the current control and treatment methods and potential reuse of FOG is highlighted. It is expected that this review would provide scientists and the concerned authorities a holistic view of the recent researches on FOG control, treatment, and reuse.

Reported Adverse Health Effects in Children from Ingestion of Alcohol-Based Hand Sanitizers - United States, 2011-2014.

Science.gov (United States)

Santos, Cynthia; Kieszak, Stephanie; Wang, Alice; Law, Royal; Schier, Joshua; Wolkin, Amy

2017-03-03

Hand sanitizers are effective and inexpensive products that can reduce microorganisms on the skin, but ingestion or improper use can be associated with health risks. Many hand sanitizers contain up to 60%-95% ethanol or isopropyl alcohol by volume, and are often combined with scents that might be appealing to young children. Recent reports have identified serious consequences, including apnea, acidosis, and coma in young children who swallowed alcohol-based (alcohol) hand sanitizer (1-3). Poison control centers collect data on intentional and unintentional exposures to hand sanitizer solutions resulting from various routes of exposure, including ingestion, inhalation, and dermal and ocular exposures. To characterize exposures of children aged ≤12 years to alcohol hand sanitizers, CDC analyzed data reported to the National Poison Data System (NPDS).* The major route of exposure to both alcohol and nonalcohol-based (nonalcohol) hand sanitizers was ingestion. The majority of intentional exposures to alcohol hand sanitizers occurred in children aged 6-12 years. Alcohol hand sanitizer exposures were associated with worse outcomes than were nonalcohol hand sanitizer exposures. Caregivers and health care providers should be aware of the potential dangers associated with hand sanitizer ingestion. Children using alcohol hand sanitizers should be supervised and these products should be kept out of reach from children when not in use.

Refreshing Music: Fog Harvesting with Harps

Science.gov (United States)

Shi, Weiwei; Anderson, Mark; Kennedy, Brook; Boreyko, Jonathan

2017-11-01

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture fog, while fine meshes suffer from clogging issues. Here, we design a new type of fog harvester comprised of an array of vertical wires, which we call ``fog harps.'' To investigate the water collection efficiency, three fog harps were designed with different diameters (254 μm, 508 μm and 1.30 mm) but the same pitch-to-diameter ratio of 2. For comparison, three different size meshes were purchased with equivalent dimensions. As expected for the mesh structures, the mid-sized wires performed the best, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog harvesting rate continually increased with decreasing wire diameter for the fog harps, due to its low hysteresis that prevented droplet clogging. This resulted in a 3-fold enhancement in the fog harvesting rate for the harp form factor compared to the mesh. The lack of a performance ceiling for the harps suggest that even greater enhancements could be achieved by scaling down to yet smaller sizes.

The effect of fog on radionuclide deposition velocities

International Nuclear Information System (INIS)

Gibb, R.; Carson, P.; Thompson, W.

1997-01-01

Current nuclear power station release models do not evaluate deposition under foggy atmospheric conditions. Deposition velocities and scavenging coefficients of radioactive particles entrained in fog are presented for the Point Lepreau area of the Bay of Fundy coast. It is recommended to calculate deposition based on fog deposition velocities. The deposition velocities can be calculated from common meteorological data. The range of deposition velocities is approximately 1 - 100 cm/s. Fog deposition is surface roughness dependent with forests having larger deposition and deposition velocities than soil or grasses. (author)

Electron-microscope study of cloud and fog nuclei

Energy Technology Data Exchange (ETDEWEB)

Ogiwara, S; Okita, T

1952-01-01

Droplets of clouds on a mountain and of fog in an urban area were captured and the form, nature and size of their nuclei were studied by means of an electron-microscope and by a chamber of constant humidity. These nuclei have similar form and nature to the hygroscopic particles in haze and to the artificially produced combustion particles. No sea-salt nuclei were found in our observations, therefore, sea-spray appears to be an insignificant source of condensation nuclei. It was found that both the cloud and the fog nuclei originated in combustion products which were the mixture of hygroscopic and non-hygroscopic substances, and that the greater part of the nuclei did not contain pure sulfuric acid.

Prospects of Source-Separation-Based Sanitation Concepts: A Model-Based Study

Directory of Open Access Journals (Sweden)

Cees Buisman

2013-07-01

Full Text Available Separation of different domestic wastewater streams and targeted on-site treatment for resource recovery has been recognized as one of the most promising sanitation concepts to re-establish the balance in carbon, nutrient and water cycles. In this study a model was developed based on literature data to compare energy and water balance, nutrient recovery, chemical use, effluent quality and land area requirement in four different sanitation concepts: (1 centralized; (2 centralized with source-separation of urine; (3 source-separation of black water, kitchen refuse and grey water; and (4 source-separation of urine, feces, kitchen refuse and grey water. The highest primary energy consumption of 914 MJ/capita(cap/year was attained within the centralized sanitation concept, and the lowest primary energy consumption of 437 MJ/cap/year was attained within source-separation of urine, feces, kitchen refuse and grey water. Grey water bio-flocculation and subsequent grey water sludge co-digestion decreased the primary energy consumption, but was not energetically favorable to couple with grey water effluent reuse. Source-separation of urine improved the energy balance, nutrient recovery and effluent quality, but required larger land area and higher chemical use in the centralized concept.

Light-leaking region segmentation of FOG fiber based on quality evaluation of infrared image

Science.gov (United States)

Liu, Haoting; Wang, Wei; Gao, Feng; Shan, Lianjie; Ma, Yuzhou; Ge, Wenqian

2014-07-01

To improve the assembly reliability of Fiber Optic Gyroscope (FOG), a light leakage detection system and method is developed. First, an agile movement control platform is designed to implement the pose control of FOG optical path component in 6 Degrees of Freedom (DOF). Second, an infrared camera is employed to capture the working state images of corresponding fibers in optical path component after the manual assembly of FOG; therefore the entire light transmission process of key sections in light-path can be recorded. Third, an image quality evaluation based region segmentation method is developed for the light leakage images. In contrast to the traditional methods, the image quality metrics, including the region contrast, the edge blur, and the image noise level, are firstly considered to distinguish the image characters of infrared image; then the robust segmentation algorithms, including graph cut and flood fill, are all developed for region segmentation according to the specific image quality. Finally, after the image segmentation of light leakage region, the typical light-leaking type, such as the point defect, the wedge defect, and the surface defect can be identified. By using the image quality based method, the applicability of our proposed system can be improved dramatically. Many experiment results have proved the validity and effectiveness of this method.

Prospects of Source-Separation-Based Sanitation Concepts: A Model-Based Study

NARCIS (Netherlands)

Tervahauta, T.H.; Trang Hoang,; Hernández, L.; Zeeman, G.; Buisman, C.J.N.

2013-01-01

Separation of different domestic wastewater streams and targeted on-site treatment for resource recovery has been recognized as one of the most promising sanitation concepts to re-establish the balance in carbon, nutrient and water cycles. In this study a model was developed based on literature data

A comparison of the performance of three types of passive fog gauges under conditions of wind-driven fog and precipitation

NARCIS (Netherlands)

Frumau, K.F.A.; Burkard, R.; Schmid, S.; Bruijnzeel, L.A.; Tobón, C.; Calvo-Alvado\\, J.C.

2011-01-01

Understanding of the 'typical' amounts of fog intercepted by different types of cloud forests is hampered by a lack of comparative information on local fog climatology. Usually some kind of 'fog gauge' is used to characterize fog occurrence and amounts. Moreover, wind-driven fog and precipitation

Hierarchical Surface Architecture of Plants as an Inspiration for Biomimetic Fog Collectors.

Science.gov (United States)

Azad, M A K; Barthlott, W; Koch, K

2015-12-08

Fog collectors can enable us to alleviate the water crisis in certain arid regions of the world. A continuous fog-collection cycle consisting of a persistent capture of fog droplets and their fast transport to the target is a prerequisite for developing an efficient fog collector. In regard to this topic, a biological superior design has been found in the hierarchical surface architecture of barley (Hordeum vulgare) awns. We demonstrate here the highly wettable (advancing contact angle 16° ± 2.7 and receding contact angle 9° ± 2.6) barbed (barb = conical structure) awn as a model to develop optimized fog collectors with a high fog-capturing capability, an effective water transport, and above all an efficient fog collection. We compare the fog-collection efficiency of the model sample with other plant samples naturally grown in foggy habitats that are supposed to be very efficient fog collectors. The model sample, consisting of dry hydrophilized awns (DH awns), is found to be about twice as efficient (fog-collection rate 563.7 ± 23.2 μg/cm(2) over 10 min) as any other samples investigated under controlled experimental conditions. Finally, a design based on the hierarchical surface architecture of the model sample is proposed for the development of optimized biomimetic fog collectors.

Improved inactivation of nonenveloped enteric viruses and their surrogates by a novel alcohol-based hand sanitizer.

Science.gov (United States)

Macinga, David R; Sattar, Syed A; Jaykus, Lee-Ann; Arbogast, James W

2008-08-01

Norovirus is the leading cause of food-related illness in the United States, and contamination of ready-to-eat items by food handlers poses a high risk for disease. This study reports the in vitro (suspension test) and in vivo (fingerpad protocol) assessments of a new ethanol-based hand sanitizer containing a synergistic blend of polyquaternium polymer and organic acid, which is active against viruses of public health importance, including norovirus. When tested in suspension, the test product reduced the infectivity of the nonenveloped viruses human rotavirus (HRV), poliovirus type 1 (PV-1), and the human norovirus (HNV) surrogates feline calicivirus (FCV) F-9 and murine norovirus type 1 (MNV-1) by greater than 3 log(10) after a 30-s exposure. In contrast, a benchmark alcohol-based hand sanitizer reduced only HRV by greater than 3 log(10) and none of the additional viruses by greater than 1.2 log(10) after the same exposure. In fingerpad experiments, the test product produced a 2.48 log(10) reduction of MNV-1 after a 30-s exposure, whereas a 75% ethanol control produced a 0.91 log(10) reduction. Additionally, the test product reduced the infectivity titers of adenovirus type 5 (ADV-5) and HRV by > or =3.16 log(10) and > or =4.32 log(10), respectively, by the fingerpad assay within 15 s; and PV-1 was reduced by 2.98 log(10) in 30 s by the same method. Based on these results, we conclude that this new ethanol-based hand sanitizer is a promising option for reducing the transmission of enteric viruses, including norovirus, by food handlers and care providers.

Fog inerting criteria for hydrogen/air mixtures

International Nuclear Information System (INIS)

Tsai, S.S.; Liparulo, N.J.

1982-01-01

A distributed ignition system has been proposed to ignite hydrogen at low concentration in the ice condenser containment during severe accidents. The post-accident containment atmosphere could be misty due to fog generation from the break flow and condensation in the ice bed. Thus it is important to establish a fog inerting criterion for effective performance of the ignition system. This paper presents such a criterion that specifies the necessary fogging conditions, i.e., fog concentration and drop size, for inerting a hydrogen/air mixture. The criterion shows that the minimum fog inerting concentration varies with the square of the volume mean fog drop size. The present fog inerting criterion is shown to be in general agreement with the Factory Mutual test data

Terra Preta sanitation: re-discovered from an ancient Amazonian civilisation - integrating sanitation, bio-waste management and agriculture.

Science.gov (United States)

Factura, H; Bettendorf, T; Buzie, C; Pieplow, H; Reckin, J; Otterpohl, R

2010-01-01

The recent discovery of the bio-waste and excreta treatment of a former civilisation in the Amazon reveals the possibility of a highly efficient and simple sanitation system. With the end product that was black soil they converted 10% of former infertile soil of the region: Terra Preta do Indio (black soil of the Indians). These soils are still very fertile 500 years after this civilisation had disappeared. Deriving from these concepts, Terra Preta Sanitation (TPS) has been re-developed and adopted. TPS includes urine diversion, addition of a charcoal mixture and is based on lactic-acid-fermentation with subsequent vermicomposting. No water, ventilation or external energy is required. Natural formation processes are employed to transform excreta into lasting fertile soil that can be utilised in urban agriculture. The authors studied the lacto-fermentation of faecal matter with a minimum of 4 weeks followed by vermicomposting. The results showed that lactic-acid fermentation with addition of a charcoal mixture is a suitable option for dry toilets as the container can be closed after usage. Hardly any odour occured even after periods of several weeks. Lactic-acid fermentation alone without addition of bulking agents such as paper and sliced-cut wood to raise the C/N ratio is creating a substrate that is not accepted by worms.

The Thermodynamic Structure of Arctic Coastal Fog Occurring During the Melt Season over East Greenland

Science.gov (United States)

Gilson, Gaëlle F.; Jiskoot, Hester; Cassano, John J.; Gultepe, Ismail; James, Timothy D.

2018-05-01

An automated method to classify Arctic fog into distinct thermodynamic profiles using historic in-situ surface and upper-air observations is presented. This classification is applied to low-resolution Integrated Global Radiosonde Archive (IGRA) soundings and high-resolution Arctic Summer Cloud Ocean Study (ASCOS) soundings in low- and high-Arctic coastal and pack-ice environments. Results allow investigation of fog macrophysical properties and processes in coastal East Greenland during melt seasons 1980-2012. Integrated with fog observations from three synoptic weather stations, 422 IGRA soundings are classified into six fog thermodynamic types based on surface saturation ratio, type of temperature inversion, fog-top height relative to inversion-base height and stability using the virtual potential temperature gradient. Between 65-80% of fog observations occur with a low-level inversion, and statically neutral or unstable surface layers occur frequently. Thermodynamic classification is sensitive to the assigned dew-point depression threshold, but categorization is robust. Despite differences in the vertical resolution of radiosonde observations, IGRA and ASCOS soundings yield the same six fog classes, with fog-class distribution varying with latitude and environmental conditions. High-Arctic fog frequently resides within an elevated inversion layer, whereas low-Arctic fog is more often restricted to the mixed layer. Using supplementary time-lapse images, ASCOS microwave radiometer retrievals and airmass back-trajectories, we hypothesize that the thermodynamic classes represent different stages of advection fog formation, development, and dissipation, including stratus-base lowering and fog lifting. This automated extraction of thermodynamic boundary-layer and inversion structure can be applied to radiosonde observations worldwide to better evaluate fog conditions that affect transportation and lead to improvements in numerical models.

Water, sanitation and hygiene in community based care ...

African Journals Online (AJOL)

Majority of the HIV/AIDS patients in South Africa receive health care services at home. However, limited studies have been conducted to examine the water, sanitation and hygiene (WASH) situation in the homes of the care receivers and its impact on community-based care. The main objective of this study was to explore ...

Cooling pond fog studies

International Nuclear Information System (INIS)

Hicks, B.B.

1978-01-01

The Fog Excess Water Index (FEWI) method of fog prediction has been verified by the use of data obtained at the Dresden cooling pond during 1976 and 1977 and by a reanalysis of observations made in conjunction with a study of cooling pond simulators during 1974. For applications in which the method is applied to measurements or estimates of bulk water temperature, a critical value of about 0.7 mb appears to be most appropriate. The present analyses confirm the earlier finding that wind speed plays little part in determining the susceptibility for fog generation

Microbiological Sampling Methods and Sanitation of Edible Plants Grown on ISS

Science.gov (United States)

Parrish, Charles H. II; Khodadad, Christina L.; Garland, Nathaniel T.; Larson, Brian D.; Hummreick, Mary E.

2013-01-01

Pathogenic microbes on the surfaces of salad crops and growth chambers pose a threat to the health of crew on International Space Station. For astronauts to safely consume spacegrown vegetables produced in NASA's new vegetable production unit, VEGGIE, three technical challenges must be overcome: real-time sampling, microbiological analysis, and sanitation. Raphanus sativus cultivar Cherry Bomb II and Latuca sativa cultivar Outredgeous, two saled crops to be grown in VEGGIE, were inoculated with Salmonella enterica serovar Typhimurium (S. Typhimurium), a bacterium known to cause food-borne illness Tape- and swab-based sampling techniques were optimized for use in microgravity and assessed for effectiveness in recovery of bacteria from crop surfaces: Rapid pathogen detection and molecular analyses were performed via quantitative real-time polymerase chain reactiop using LightCycler® 480 and RAZOR® EX, a scaled-down instrument that is undergoing evaluation and testing for future flight hardware. These methods were compared with conventional, culture-based methods for the recovery of S. Typhimurium colonies. A sterile wipe saturated with a citric acid-based, food-grade sanitizer was applied to two different surface materials used in VEGGIE flight hardware that had been contaminated with the bacterium Pseudomonas aeruginosa,. another known human pathogen. To sanitize surfaces, wipes were saturated with either the sanitizer or sterile deionized water and applied to each surface. Colony forming units of P. aeruginosa grown on tryptic soy agar plates were enumerated from surface samples after sanitization treatments. Depending on the VEGGIE hardware material, 2- to 4.5-log10 reductions in colony-forming units were observed after sanitization. The difference in recovery of S. Typhimurium between tape- and swab- based sampling techniques was insignificant. RAZOR® EX rapidly detected S. Typhimurium present in both raw culture and extracted DNA samples.

A Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling.

Science.gov (United States)

Zhang, Chunxi; Lin, Tie

2016-07-28

In the oil industry, the measurement-while-drilling (MWD) systems are usually used to provide the real-time position and orientation of the bottom hole assembly (BHA) during drilling. However, the present MWD systems based on magnetic surveying technology can barely ensure good performance because of magnetic interference phenomena. In this paper, a MWD surveying system based on a fiber optic gyroscope (FOG) was developed to replace the magnetic surveying system. To accommodate the size of the downhole drilling conditions, a new design method is adopted. In order to realize long-term and high position precision and orientation surveying, an integrated surveying algorithm is proposed based on inertial navigation system (INS) and drilling features. In addition, the FOG-based MWD error model is built and the drilling features are analyzed. The state-space system model and the observation updates model of the Kalman filter are built. To validate the availability and utility of the algorithm, the semi-physical simulation is conducted under laboratory conditions. The results comparison with the traditional algorithms show that the errors were suppressed and the measurement precision of the proposed algorithm is better than the traditional ones. In addition, the proposed method uses a lot less time than the zero velocity update (ZUPT) method.

Sanitation without pollution.

Science.gov (United States)

Winblad, U

2000-01-01

The most effective way of protecting drinking water resources from domestic sewage is to use technologies that do not produce sewage. This paper gives an overview of emerging alternatives in the form of ecological sanitation systems for urban and peri-urban areas. A key feature of ecological sanitation is that it regards human excreta as a resource to be recycled rather than as waste to be disposed of. Examples given include ecological sanitation systems based on dehydration and decomposition from Mexico, El Salvador, Sweden, India and Vietnam. These systems need neither water for flushing, nor pipelines for transport, nor treatment plants and arrangements for the disposal of toxic sludge. Large scale application of ecological sanitation would lead to less environmental pollution, reduced water consumption, considerable savings on sewers and treatment plants and increased employment. In addition it would provide valuable resources for food production and wasteland development.

UAV applications for thermodynamic profiling: Emphasis on ice fog research

Science.gov (United States)

Gultepe, Ismail; Heymsfield, Andrew J.; Fernando, Harindra J. S.; Hoch, Sebastian W.; Ware, Randolph

2016-04-01

Ice fog occurs often over the Arctic, cold climatic, and mountainous regions for about 30% of time where temperature (T) can go down to -10°C or below. Ice Nucleation (IN) and cooling processes play an important role by the controlling the intensity of ice fog conditions that affect aviation application, transportation, and local climate. Ice fog can also occur at T above -10°C but close to 0°C it occurs due to freezing of supercooled droplets that include an IN. To better document ice fog conditions, observations from the ice fog events of the Indirect and Semi-Direct Aerosol effects on Climate (ISDAC) project, Barrow, Alaska, Fog Remote Sensing And Modeling (FRAM) project Yellowknife, Northwest Territories, and the Mountain Terrain Atmospheric Modeling and Observations (MATERHORN) project, Heber City, Utah, were analyzed.. Measurements difficulties of small ice fog particles at cold temperatures and low-level flying restrictions prevent observations from aircraft within the surface boundary layer. However, unmanned Aerial Vehicles (UAVs) can be operated safely to measure IN number concentration, Relative Humidity with respect to ice (RHi), T, horizontal wind speed (Uh) and direction, and ice crystal spectra less than about 500 micron. Thermodynamic profiling by a Radiometrics Profiling Microwave Radiometer (PMWR) and Vaisala CL51 ceilometer was used to describe ice fog conditions in the vertical and its time development. In this presentation, ice fog characteristics and its thermodynamic environment will be presented using both ground-based and airborne platforms such as a UAV with new sensors. Some examples of measurements from the UAV for future research, and challenges related to both ice fog measurements and visibility parameterization will also be presented.

Container-based sanitation: assessing costs and effectiveness of excreta management in Cap Haitien, Haiti.

Science.gov (United States)

Tilmans, Sebastien; Russel, Kory; Sklar, Rachel; Page, Leah; Kramer, Sasha; Davis, Jennifer

2015-04-01

Container-based sanitation (CBS) - in which wastes are captured in sealable containers that are then transported to treatment facilities - is an alternative sanitation option in urban areas where on-site sanitation and sewerage are infeasible. This paper presents the results of a pilot household CBS service in Cap Haitien, Haiti. We quantify the excreta generated weekly in a dense urban slum, (1) the proportion safely removed via container-based public and household toilets, and the costs associated with these systems. The CBS service yielded an approximately 3.5-fold decrease in the unmanaged share of faeces produced, and nearly eliminated the reported use of open defecation and "flying toilets" among service recipients. The costs of this pilot small-scale service were higher than those of large-scale waterborne sewerage, but economies of scale have the potential to reduce CBS costs over time. The paper concludes with a discussion of planning and policy implications of incorporating CBS into the menu of sanitation options for rapidly growing cities.

CHEMIFOGV - A Model to Simulate Radiation Fogs and their Interaction with Vegetation and Chemistry

International Nuclear Information System (INIS)

Winterrath, Tanja; Bott, Andreas

2001-01-01

Radiation fog is an important modifier of atmospheric compounds in the planetary boundary layer. In vegetated areas effects are especially pronounced due to the enlarged surface area. Besides affecting the lower boundary of atmospheric models fog acts as a multi-phase reaction chamber leading to acid deposition. Here we present the 1-dimensional radiation fog modelCHEMIFOG V to simulate regional radiation fog events. The key feature of the fog model is the detailed microphysics, where the aerosol/droplet spectrum is described with a joint 2-dimensional distribution, but also the dynamics, thermodynamics, and radiative transfer are calculated. To investigate the interaction between fog and the biosphere a multi-layer vegetation module, including a soil module as well as a dry deposition module were coupled. Vegetation influences the dynamics, thermodynamics, and the radiation field of the lowest atmospheric layers. With CHEMIFOG V , numerical case studies on dry and moist deposition processes on vegetation surfaces were performed. Hereby multi-phase chemistry and the processing of aerosols were considered. The results show that the chemical composition of the deposited fog droplets is mainly determined by the aerosol composition. Dry deposition fluxes are dependent on the incoming radiation and the leaves' surface conditions with respect to water coverage.Due to chemical aerosol processing and deposition, the aerosol spectrum is significantly modified in the planetary boundary layer

The Chemical Composition of Fogs and Clouds in Southern California.

Science.gov (United States)

Munger, James William

Fog and clouds are frequent occurrences in Southern California. Their chemical composition is of interest due to their potential role in the transformation of sulfur and nitrogen oxides to sulfuric and nitric acid and in the subsequent deposition of those acids. In addition, cloud and fog droplets may be involved in the chemistry of low-molecular-weight carboxylic acids and carbonyl compounds. The major inorganic species in cloud and fogwater samples were NH_4^+, H ^+, NO_3^-, and SO_4^{2-}. Concentrations in fogwater samples were 1-10 times 10^ {-3} M; pH values ranged from ~eq2 to 6. Nitrate usually exceeded sulfate. Acidity depended on the availability of of NH_3 from agricultural operations. Stratus cloudwater had somewhat lower concentrations; pH values were in the range 3-4. The major factors accounting for variation in fog- or cloudwater composition were the preexisting aerosol and gas concentrations and variations in liquid water content. Deposition and entrainment or advection of different air masses were also important during extended cloud or fog episodes. The droplet size dependence of cloudwater composition was investigated on one occasion in an intercepted coastal stratus clouds. The observations were consistent with the hypothesis that small droplets form on small secondary aerosol composed of H_2SO _4, HNO_3, and their NH_4^+ salts, while large droplets form on large sea-salt and soil-dust aerosol. Species that can exist in the gas phase, such as HCl and HNO _3, may be found in either droplet-size fraction. Concentrations of S(IV) and CH_2 O in the range 100-1000 μm were observed in fogwater from urban sites in Southern California. Lower concentrations were observed in stratus clouds. The high levels of S(IV) and CH_2 O were attributed to the formation of hydroxymethanesulfonate (HMSA), the S(IV) adduct of CH_2O. Direct measurement of HMSA in fogwater samples from Bakersfield, CA were made by ion-pairing chromatography. Glyoxal and methylglyoxal

Sanitizer efficacy in preventing cross-contamination of heads of lettuce during retail crisping.

Science.gov (United States)

Jung, Yangjin; Jang, Hyein; Guo, Mengqi; Gao, Jingwen; Matthews, Karl R

2017-06-01

This study was conducted to provide information regarding mitigation of cross-contamination through the use of sanitizer during crisping at retail outlets. Seven non-inoculated heads and one inoculated head (≈5 log CFU/g) of lettuce were placed into commercial sink filled with 76 L of tap water (TW), electrolyzed water (EW, free chlorine: 43 ± 6 ppm), lactic acid and phosphoric acid-based sanitizer (LPA, pH 2.89), or citric acid-based sanitizer (CA, pH 2.78) and soaked for 5 min. Two subsequent batches (eight non-inoculated heads per batch) were soaked in the same solution. Soaking with EW significantly reduced the population of S. enterica (2.8 ± 1.5 log CFU/g), E. coli O157:H7 (3.4 ± 1.1 log CFU/g), and L. monocytogenes (2.6 ± 0.7 log CFU/g) inoculated on Romaine lettuce compared to TW, LPA, and CA (p lettuce, EW significantly reduced populations of S. enterica and E. coli O157:H7, but not L. monocytogenes compared to other treatments. No significant difference was noted between TW, LPA, and CA in reducing foodborne pathogens (p > 0.05) or preventing cross-contamination. Soaking with EW prevented cross-contamination among lettuce heads and controlled bacterial populations in crisping water for three consecutive batches. EW may be an effective option as a sanitizer to minimizing the cross-contamination of leafy greens during the retail crisping. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Microphysics of atmospheric aerosols during winter haze/fog events in Nanjing].

Science.gov (United States)

Yang, Jun; Niu, Zhong-qing; Shi, Chun-e; Liu, Duan-yang; Li, Zi-hua

2010-07-01

Intensive field observations of fog/haze events, including simultaneous measurements of aerosol particle and fog droplet size distributions, were conducted in Nanjing in November, 2007. Four weather conditions (fog, mist, wet haze and haze) were distinguished based on visibility and liquid water content firstly. Then, the microphysical characteristics of coarse and fine particles in each condition were investigated. The results showed the dominant sequence of the four weather conditions was hazemist-->wet haze-->fog-->, wet haze-->misthaze. The lasting time of pre-fog wet haze was longer than that of post-fog wet haze. The number, surface area and volume concentration of coarse particles with diameter larger than 2.0 micron in fog were much higher than those in the other three conditions, and the smallest concentrations were observed in haze. The size distributions of surface area and volume concentration exhibited multi-peak in fog droplets, while it showed single peak for coarse particles in haze, mist and wet haze. For the fine particles with diameter larger than 0.010 microm, the spectral shapes of surface area concentration are similar in fog (mist) and wet haze (haze) condition. The dominant size ranges of fine particle number concentration were in 0.04-0.13 microm and 0.02-0.14 microm for fog and wet haze, separately. The same dominant size ranges located in 0.02-0.06 microm for both mist and haze. During the transition processes from haze, mist and wet haze to fog, the concentration of smaller particles (less than 0.060-0.090 microm) reduced and vice versa for the corresponding larger particles. Temporal variation of aerosol number concentration correlated well with the root mean diameters negatively during the observation period. The number concentration of aerosol was the lowest and the mean diameter was the largest in fog periods.

A Satellite Based Fog Study of the Korean Peninsula

National Research Council Canada - National Science Library

McDonald, David K

2007-01-01

Fog has always been a difficult phenomenon to forecast. Its unpredictable nature and propensity to quickly decrease visibilities have had adverse effects on military operations for many years across the Korean peninsula...

Fog deposition to the Atacama desert

Science.gov (United States)

Westbeld, A.; Klemm, O.; Griessbaum, F.; Sträter, E.; Larrain, H.; Osses, P.; Cereceda, P.

2010-07-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. We estimated the amount of water available for the ecosystem by deposition and determined the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of liquid water. Between 31 July and 19 August, 2008, measurements were realized in a 31 ha large Tillandsia carpet at Cerro Guanaco, located 15 km south of Iquique, northern Chile. Several data quality assurance procedures were applied. For the values in compliance with the applied criteria, the mean total deposition per hour was determined (0.04 L per m2) for foggy periods. This number was applied to estimate the amount of water deposited during the measuring period, during the entire month of August 2008, and throughout a whole year. For August 2008, a frequency of fog of 16 %, as established during the measuring period, was assumed. The frequency for a whole year was estimated from the differences of the collected amount of water obtained with standard fog collectors installed at Cerro Guanaco in an earlier study. Calculations resulted in an amount of 2.5 L per m2 of deposited fog water for the measuring period. During the entire August, 4.4 L per m2 have likely been available, and for a whole year, a total of 25 L per m2 was estimated to have reached the surface. Inaccuracies could have been caused by the low amount of data applied, and by a possible underestimation of the deposition due to additional formation of radiation fog during the fog events. Three days were used for further analysis because

PERSPECTIVES FOR FOG COMPUTING IN MANUFACTURING

Directory of Open Access Journals (Sweden)

Jakub PIZOŃ

2016-09-01

Full Text Available This article discusses ongoing efforts to enable the fog computing vision in manufacturing. As a new paradigm of computing implementation of fog computing faces many challenges that open perspective of new applications within a field of manufacturing. It is expected that fog computing will be one of factors that will accelerate development of in forth industrial revolution. In this article we discuss the perspectives of manufacturing companies surrounded by new solutions of CPS, CPPS and CM in relation to fog computing.

Biofilm formation by Staphylococcus aureus from food contact surfaces in a meat-based broth and sensitivity to sanitizers

Directory of Open Access Journals (Sweden)

Evandro Leite de Souza

2014-01-01

Full Text Available This study assessed the capacity of adhesion, the detachment kinetic and the biofilm formation by Staphylococcus aureus isolated from food services on stainless steel and polypropylene surfaces (2 x 2 cm when cultivated in a meat-based broth at 28 and 7 ºC. It was also to study the efficacy of the sanitizers sodium hypochlorite (250 mg/L and peracetic acid (30 mg/L in inactivating the bacterial cells in the preformed biofilm. S. aureus strains adhered in high numbers regardless the assayed surface kind and incubation temperature over 72 h. Cells detachment of surfaces revealed high persistence over the incubation period. Number of cells needed for biofilm formation was noted at all experimental systems already after 3 days. Peracetic acid and sodium hypochlorite were not efficient in completely removing the cells of S. aureus adhered on polypropylene and stainless steel surfaces. From these results, the assayed strains revealed high capacity to adhere and form biofilm on polypropylene and stainless steel surfaces under different growth conditions. Moreover, the cells in biofilm matrix were resistant for total removal when submitted to the exposure to sanitizers.

Fog1 is required for cardiac looping in zebrafish

OpenAIRE

Walton, R. Zaak; Bruce, Ashley E.E.; Olivey, Harold E.; Najib, Khalid; Johnson, Vanitha; Earley, Judy U.; Ho, Robert K.; Svensson, Eric C.

2006-01-01

To further our understanding of FOG gene function during cardiac development, we utilized zebrafish to examine FOG’s role in the early steps of heart morphogenesis. We identified fragments of three fog genes in the zebrafish genomic database and isolated full-length coding sequences for each of these genes by using a combination of RT-PCR and 5′-RACE. One gene was similar to murine FOG-1 (fog1), while the remaining two were similar to murine FOG-2 (fog2a and fog2b). All Fog proteins were able...

Urban Heat Island Over Delhi Punches Holes in Widespread Fog in the Indo-Gangetic Plains

Science.gov (United States)

Gautam, Ritesh; Singh, Manoj K.

2018-01-01

Persistent and widespread fog affects several densely populated and agriculturally fertile basins around the world. Dense and polluted fog is especially known to impact transportation, air quality, and public health. Here we report a striking observation of holes in fog over urban areas in satellite imagery. The extent of fog holes appear highly correlated with city populations in fog-prevalent regions of Asia, Europe, and the United States. We find the highest frequency and largest extent of fog holes over Delhi along with suppressed fog fraction, amidst increased fog occurrence over the Indo-Gangetic Plains, based on 17 years of satellite data (2000-2016). This apparent urban heat impact is characterized in sharp urban-rural gradients in surface temperatures and fog thickness. Urban heating seems to have already amplified the long-term fog decline in Europe and the United States and should be assessed over regions undergoing urban expansion including India, where no previous linkages are reported between urban heating and fog.

Improved Inactivation of Nonenveloped Enteric Viruses and Their Surrogates by a Novel Alcohol-Based Hand Sanitizer ▿

Science.gov (United States)

Macinga, David R.; Sattar, Syed A.; Jaykus, Lee-Ann; Arbogast, James W.

2008-01-01

Norovirus is the leading cause of food-related illness in the United States, and contamination of ready-to-eat items by food handlers poses a high risk for disease. This study reports the in vitro (suspension test) and in vivo (fingerpad protocol) assessments of a new ethanol-based hand sanitizer containing a synergistic blend of polyquaternium polymer and organic acid, which is active against viruses of public health importance, including norovirus. When tested in suspension, the test product reduced the infectivity of the nonenveloped viruses human rotavirus (HRV), poliovirus type 1 (PV-1), and the human norovirus (HNV) surrogates feline calicivirus (FCV) F-9 and murine norovirus type 1 (MNV-1) by greater than 3 log10 after a 30-s exposure. In contrast, a benchmark alcohol-based hand sanitizer reduced only HRV by greater than 3 log10 and none of the additional viruses by greater than 1.2 log10 after the same exposure. In fingerpad experiments, the test product produced a 2.48 log10 reduction of MNV-1 after a 30-s exposure, whereas a 75% ethanol control produced a 0.91 log10 reduction. Additionally, the test product reduced the infectivity titers of adenovirus type 5 (ADV-5) and HRV by ≥3.16 log10 and ≥4.32 log10, respectively, by the fingerpad assay within 15 s; and PV-1 was reduced by 2.98 log10 in 30 s by the same method. Based on these results, we conclude that this new ethanol-based hand sanitizer is a promising option for reducing the transmission of enteric viruses, including norovirus, by food handlers and care providers. PMID:18586970

33 CFR 118.130 - Fog signals.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Fog signals. 118.130 Section 118... LIGHTING AND OTHER SIGNALS § 118.130 Fog signals. On waterways where visibility is frequently reduced due to fog or other causes, the District Commander may require or authorize the installation of one or...

A Mobility Management Using Follow-Me Cloud-Cloudlet in Fog-Computing-Based RANs for Smart Cities.

Science.gov (United States)

Chen, Yuh-Shyan; Tsai, Yi-Ting

2018-02-06

Mobility management for supporting the location tracking and location-based service (LBS) is an important issue of smart city by providing the means for the smooth transportation of people and goods. The mobility is useful to contribute the innovation in both public and private transportation infrastructures for smart cities. With the assistance of edge/fog computing, this paper presents a fully new mobility management using the proposed follow-me cloud-cloudlet (FMCL) approach in fog-computing-based radio access networks (Fog-RANs) for smart cities. The proposed follow-me cloud-cloudlet approach is an integration strategy of follow-me cloud (FMC) and follow-me edge (FME) (or called cloudlet). A user equipment (UE) receives the data, transmitted from original cloud, into the original edge cloud before the handover operation. After the handover operation, an UE searches for a new cloud, called as a migrated cloud, and a new edge cloud, called as a migrated edge cloud near to UE, where the remaining data is migrated from the original cloud to the migrated cloud and all the remaining data are received in the new edge cloud. Existing FMC results do not have the property of the VM migration between cloudlets for the purpose of reducing the transmission latency, and existing FME results do not keep the property of the service migration between data centers for reducing the transmission latency. Our proposed FMCL approach can simultaneously keep the VM migration between cloudlets and service migration between data centers to significantly reduce the transmission latency. The new proposed mobility management using FMCL approach aims to reduce the total transmission time if some data packets are pre-scheduled and pre-stored into the cache of cloudlet if UE is switching from the previous Fog-RAN to the serving Fog-RAN. To illustrate the performance achievement, the mathematical analysis and simulation results are examined in terms of the total transmission time, the

A Mobility Management Using Follow-Me Cloud-Cloudlet in Fog-Computing-Based RANs for Smart Cities

Directory of Open Access Journals (Sweden)

Yuh-Shyan Chen

2018-02-01

Full Text Available Mobility management for supporting the location tracking and location-based service (LBS is an important issue of smart city by providing the means for the smooth transportation of people and goods. The mobility is useful to contribute the innovation in both public and private transportation infrastructures for smart cities. With the assistance of edge/fog computing, this paper presents a fully new mobility management using the proposed follow-me cloud-cloudlet (FMCL approach in fog-computing-based radio access networks (Fog-RANs for smart cities. The proposed follow-me cloud-cloudlet approach is an integration strategy of follow-me cloud (FMC and follow-me edge (FME (or called cloudlet. A user equipment (UE receives the data, transmitted from original cloud, into the original edge cloud before the handover operation. After the handover operation, an UE searches for a new cloud, called as a migrated cloud, and a new edge cloud, called as a migrated edge cloud near to UE, where the remaining data is migrated from the original cloud to the migrated cloud and all the remaining data are received in the new edge cloud. Existing FMC results do not have the property of the VM migration between cloudlets for the purpose of reducing the transmission latency, and existing FME results do not keep the property of the service migration between data centers for reducing the transmission latency. Our proposed FMCL approach can simultaneously keep the VM migration between cloudlets and service migration between data centers to significantly reduce the transmission latency. The new proposed mobility management using FMCL approach aims to reduce the total transmission time if some data packets are pre-scheduled and pre-stored into the cache of cloudlet if UE is switching from the previous Fog-RAN to the serving Fog-RAN. To illustrate the performance achievement, the mathematical analysis and simulation results are examined in terms of the total transmission time

A Fog Computing and Cloudlet Based Augmented Reality System for the Industry 4.0 Shipyard.

Science.gov (United States)

Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Vilar-Montesinos, Miguel

2018-06-02

Augmented Reality (AR) is one of the key technologies pointed out by Industry 4.0 as a tool for enhancing the next generation of automated and computerized factories. AR can also help shipbuilding operators, since they usually need to interact with information (e.g., product datasheets, instructions, maintenance procedures, quality control forms) that could be handled easily and more efficiently through AR devices. This is the reason why Navantia, one of the 10 largest shipbuilders in the world, is studying the application of AR (among other technologies) in different shipyard environments in a project called "Shipyard 4.0". This article presents Navantia's industrial AR (IAR) architecture, which is based on cloudlets and on the fog computing paradigm. Both technologies are ideal for supporting physically-distributed, low-latency and QoS-aware applications that decrease the network traffic and the computational load of traditional cloud computing systems. The proposed IAR communications architecture is evaluated in real-world scenarios with payload sizes according to demanding Microsoft HoloLens applications and when using a cloud, a cloudlet and a fog computing system. The results show that, in terms of response delay, the fog computing system is the fastest when transferring small payloads (less than 128 KB), while for larger file sizes, the cloudlet solution is faster than the others. Moreover, under high loads (with many concurrent IAR clients), the cloudlet in some cases is more than four times faster than the fog computing system in terms of response delay.

Coastal fog, climate change, and the environment

Science.gov (United States)

Torregrosa, Alicia; O'Brien, Travis A.; Faloona, Ian C.

2014-01-01

Coastal marine fog, a characteristic feature of climates generated at the eastern boundaries of ocean basins worldwide, evokes different feelings in those who experience it (see Figure 1). Authors and poets use fog to represent mystery, bleakness, and confusion. Film directors seek out fog to shroud scenes in eerie gloominess. Tourists visiting beaches bemoan the cool and damp conditions that create a striking contrast to the sunny warm conditions typically found less than a few kilometers inland. Airline passengers delayed by fog impatiently wait for the skies to clear. Residents get used to the Sun “rising” in midday after fog dissipates.

COSMO-PAFOG: Three-dimensional fog forecasting with the high-resolution COSMO-model

Science.gov (United States)

Hacker, Maike; Bott, Andreas

2017-04-01

The presence of fog can have critical impact on shipping, aviation and road traffic increasing the risk of serious accidents. Besides these negative impacts of fog, in arid regions fog is explored as a supplementary source of water for human settlements. Thus the improvement of fog forecasts holds immense operational value. The aim of this study is the development of an efficient three-dimensional numerical fog forecast model based on a mesoscale weather prediction model for the application in the Namib region. The microphysical parametrization of the one-dimensional fog forecast model PAFOG (PArameterized FOG) is implemented in the three-dimensional nonhydrostatic mesoscale weather prediction model COSMO (COnsortium for Small-scale MOdeling) developed and maintained by the German Meteorological Service. Cloud water droplets are introduced in COSMO as prognostic variables, thus allowing a detailed description of droplet sedimentation. Furthermore, a visibility parametrization depending on the liquid water content and the droplet number concentration is implemented. The resulting fog forecast model COSMO-PAFOG is run with kilometer-scale horizontal resolution. In vertical direction, we use logarithmically equidistant layers with 45 of 80 layers in total located below 2000 m. Model results are compared to satellite observations and synoptic observations of the German Meteorological Service for a domain in the west of Germany, before the model is adapted to the geographical and climatological conditions in the Namib desert. COSMO-PAFOG is able to represent the horizontal structure of fog patches reasonably well. Especially small fog patches typical of radiation fog can be simulated in agreement with observations. Ground observations of temperature are also reproduced. Simulations without the PAFOG microphysics yield unrealistically high liquid water contents. This in turn reduces the radiative cooling of the ground, thus inhibiting nocturnal temperature decrease. The

Remote sensing of height of a fog layer and temperature of fog droplets using infrared thermometer and meteorological satellite

International Nuclear Information System (INIS)

Inoue, K.; Abe, H.

1998-01-01

To study meteorological characteristics of cool foggy easterly (Yamase), by which rice production in the Tohoku region was frequently damaged, we measured temperature of the fog layer resulted from Yamase, using infrared thermal indicator and meteorological satellite (HIMAWARI). These temperature data were compared with wet-bulb and dry-bulb temperatures obtained by a ventilated psychrometer. Generally, the temperature of fog droplets estimated from infrared thermal indicator was higher than the wet-bulb temperature by about 0∼1°C. This result indicates clearly that fog droplets were cooled by evaporation on the droplet surface. Under the conditions that the fog layer is homogeneous in liquid water content and fog droplet size distribution, the height of the fog layer can be estimated by the observation of visibility and relative solar radiation flux. (author)

Numerical Modeling of Persistent Winter Fog over the Indo-Gangetic Plains

Science.gov (United States)

Ghimire, S.; Adhikary, B.; Praveen, P. S.; Panday, A. K.

2017-12-01

Every winter the Indo-Gangetic Plains (IGP) in northern South Asia; bounded by the great Himalayas in the north, are periodically covered by dense and persistent fog that severely impacts day-to-day activities of several hundred million people. The fog can stretch over several hundred kilometers and last several days in many locations. Despite the fog's high impact, there are very limited in-situ observations available to characterize persistent fog episodes. Also, there has been very little success to date in accurately predicting the fog occurrence and extent over a larger area such as IGP. This study will present insights into the performance of the Weather Research and Forecasting (WRF) model simulating persistent winter fog prediction in the IGP region, compared to satellite observations and in-situ measurements. Since fog is not a prognostic variable in WRF, the study presents results based on multi-rule diagnostic algorithms published in peer reviewed journals. In addition, fog episodes were analyzed using the Air Force Weather Agency (AFWA) diagnostics package available for WRF. On a regional scale, MODIS data onboard the TERRA and AQUA satellites are used to evaluate model performance skills. At a local scale, the model is evaluated at two sites in the southern Nepal, Lumbini and Chitwan, located in the IGP. Lumbini and Chitwan observatories have Luftt and Biral weather sensors which allow monitoring presence of fog, visibility range and surface meteorology. In addition, for Chitwan, data from DMT Fog Monitor (FM 120) and Luftt CHM 15K Ceilometer were used to compare model performance for liquid-water content and planetary boundary layer during foggy and non-foggy days.

Urban-rural fog differences in Belgrade area, Serbia

Science.gov (United States)

Vujović, Dragana; Todorović, Nedeljko

2018-02-01

Urban/rural fog appearance during the last 27 years in the Belgrade region is analysed using hourly meteorological records from two meteorological stations: an urban station at Belgrade-Vračar (BV) and a rural station at Belgrade-Airport (BA). The effects of urban development on fog formation are discussed through analysis of fog frequency trends and comparison with a number of meteorological parameters. The mean annual and the mean annual minimum temperatures were greater at the urban BV station than at the rural BA station. The mean monthly relative humidity and the mean monthly water vapour pressure were greater at the rural than urban station. During the period of research (1988-2014), BA experiences 425 more days with fog than BV, which means that BV experiences fog for 62.68% of foggy days at BA. Trends in the number of days with fog were statistically non-significant. We analysed the fog occurrence during different types of weather. Fog in urban BV occurred more frequently during cyclonal circulation (in 52.75% of cases). In rural BA, the trend was the opposite and fog appeared more frequently during anticyclonic circulation (in 53.58% of cases). Fog at BV occurred most frequently in stable anticyclonic weather with light wind, when a temperature inversion existed (21.86% of cases). Most frequently, fog at BA occurred in the morning and only lasted a short time, followed by clearer skies during the anticyclonic warm and dry weather (22.55% of cases).

Fog prediction using the modified asymptotic liquid water content vertical distribution formulation with the Weather Research and Forecasting model

Science.gov (United States)

Kim, E.; Lee, S.; Kim, J.; Chae, D.

2017-12-01

Fog forecasts have difficulty in forecasting due to temporal and spatial resolution problems, high numerical computations, complicated mechanisms related to turbulence in order to analyze the fog in the model, and a lack of appropriate fog physical processes. Conventional fog prediction is based on the surface visibility threshold "fog diagnosis method is based on the fog related variables near the surface, such as visibility, low stratus, relative humidity and wind speed but this method only predicts fog occurrence not fog intensity. To improve this, a new fog diagnostic scheme, based on an asymptotic analytical study of radiation fog (Zhou and Ferrier 2008, ZF08) is to increase the accuracy of fog prediction by calculating the vertical LWC considering cooling, turbulence and droplet settling, visibility, surface relative humidity and low stratus. In this study, we intend to improve fog prediction through the Weather Research and Forecasting (WRF) model using high-resolution data. Although the prediction accuracy can be improved by combining the WRF Planetary Boundary Layer (PBL) scheme and 1 dimension (1D) model, it is necessary to increase the vertical resolution in the boundary layer to implement the fog formation and persistence mechanism in the internal boundary layer in the PBL more accurately, we'll modify the algorithm to enhance the effects of turbulence and then compare the newly predicted fog and observations to determine the accuracy of the forecast of the fog occurring on the Korean peninsula.

Does the use of alcohol-based hand gel sanitizer reduce travellers' diarrhea and gastrointestinal upset?: A preliminary survey.

Science.gov (United States)

Henriey, Delphine; Delmont, Jean; Gautret, Philippe

2014-01-01

Use of alcohol-based hand sanitizer is recommended by the CDC to reduce the risk for travellers' diarrhoea, but its effectiveness has not been assessed. We investigated the potential protective effect of hand sanitizer use on the occurrence of diarrhoea and/or vomiting in 200 international travellers, who were returning home, at an international airport. We also conducted a knowledge, aptitude and practice survey about hand gel use among international travellers consulting for pre-travel advice at a specialized clinic. 200 returning travellers were included of which 32.5% declared having used alcohol-based hand sanitizer during travel. Travellers who used hand sanitizer reported diarrhoea and vomiting significantly less frequently than those who did not (17% vs. 30%, OR = 0.47; 95% CI [0.21-0.97], p = 0.04). A total of 257 travellers consulting for pre-travel advice were included. A majority of travellers knew that hand sanitizer may be used for hand hygiene and had already used hand sanitizer; 72% planned to bring hand sanitizer during their next travel. Use of hand sanitizer is highly acceptable by travellers and is associated with a reduction in the incidence of travellers' diarrhoea and/or vomiting. Copyright © 2014 Elsevier Ltd. All rights reserved.

Real-time WAMI streaming target tracking in fog

Science.gov (United States)

Chen, Yu; Blasch, Erik; Chen, Ning; Deng, Anna; Ling, Haibin; Chen, Genshe

2016-05-01

Real-time information fusion based on WAMI (Wide-Area Motion Imagery), FMV (Full Motion Video), and Text data is highly desired for many mission critical emergency or security applications. Cloud Computing has been considered promising to achieve big data integration from multi-modal sources. In many mission critical tasks, however, powerful Cloud technology cannot satisfy the tight latency tolerance as the servers are allocated far from the sensing platform, actually there is no guaranteed connection in the emergency situations. Therefore, data processing, information fusion, and decision making are required to be executed on-site (i.e., near the data collection). Fog Computing, a recently proposed extension and complement for Cloud Computing, enables computing on-site without outsourcing jobs to a remote Cloud. In this work, we have investigated the feasibility of processing streaming WAMI in the Fog for real-time, online, uninterrupted target tracking. Using a single target tracking algorithm, we studied the performance of a Fog Computing prototype. The experimental results are very encouraging that validated the effectiveness of our Fog approach to achieve real-time frame rates.

Crash risk analysis during fog conditions using real-time traffic data.

Science.gov (United States)

Wu, Yina; Abdel-Aty, Mohamed; Lee, Jaeyoung

2018-05-01

This research investigates the changes of traffic characteristics and crash risks during fog conditions. Using real-time traffic flow and weather data at two regions in Florida, the traffic patterns at the fog duration were compared to the traffic patterns at the clear duration. It was found that the average 5-min speed and the average 5-min volume were prone to decreasing during fog. Based on previous studies, a "Crash Risk Increase Indicator (CRII)" was proposed to explore the differences of crash risk between fog and clear conditions. A binary logistic regression model was applied to link the increase of crash risks with traffic flow characteristics. The results suggested that the proposed indicator worked well in evaluating the increase of crash risk under fog condition. It was indicated that the crash risk was prone to increase at ramp vicinities in fog conditions. Also, the average 5-min volume during fog and the lane position are important factors for crash risk increase. The differences between the regions were also explored in this study. The results indicated that the locations with heavier traffic or locations at the lanes that were closest to the median in Region 2 were more likely to observe an increase in crash risks in fog conditions. It is expected that the proposed indicator can help identify the dangerous traffic status under fog conditions and then proper ITS technologies can be implemented to enhance traffic safety when the visibility declines. Copyright © 2017 Elsevier Ltd. All rights reserved.

Meta-analysis of the Effects of Sanitizing Treatments on Salmonella, Escherichia coli O157:H7, and Listeria monocytogenes Inactivation in Fresh Produce

Science.gov (United States)

Prado-Silva, Leonardo; Cadavez, Vasco; Gonzales-Barron, Ursula; Rezende, Ana Carolina B.

2015-01-01

The aim of this study was to perform a meta-analysis of the effects of sanitizing treatments of fresh produce on Salmonella spp., Escherichia coli O157:H7, and Listeria monocytogenes. From 55 primary studies found to report on such effects, 40 were selected based on specific criteria, leading to more than 1,000 data on mean log reductions of these three bacterial pathogens impairing the safety of fresh produce. Data were partitioned to build three meta-analytical models that could allow the assessment of differences in mean log reductions among pathogens, fresh produce, and sanitizers. Moderating variables assessed in the meta-analytical models included type of fresh produce, type of sanitizer, concentration, and treatment time and temperature. Further, a proposal was done to classify the sanitizers according to bactericidal efficacy by means of a meta-analytical dendrogram. The results indicated that both time and temperature significantly affected the mean log reductions of the sanitizing treatment (P vegetables (for example, 3.04 mean log reductions [2.32 to 3.76] obtained for carrots). Among the pathogens, E. coli O157:H7 was more resistant to ozone (1.6 mean log reductions), while L. monocytogenes and Salmonella presented high resistance to organic acids, such as citric acid, acetic acid, and lactic acid (∼3.0 mean log reductions). With regard to the sanitizers, it has been found that slightly acidic electrolyzed water, acidified sodium chlorite, and the gaseous chlorine dioxide clustered together, indicating that they possessed the strongest bactericidal effect. The results reported seem to be an important achievement for advancing the global understanding of the effectiveness of sanitizers for microbial safety of fresh produce. PMID:26362982

Sanitation practices and perceptions in Kakuma refugee camp, Kenya: Comparing the status quo with a novel service-based approach.

Directory of Open Access Journals (Sweden)

Raymond Nyoka

Full Text Available Globally, an estimated 2.5 billion people lack access to improved sanitation. Unimproved sanitation increases the risk of morbidity and mortality, especially in protracted refugee situations where sanitation is based on pit latrine use. Once the pit is full, waste remains in the pit, necessitating the construction of a new latrine, straining available land and funding resources. A viable, sustainable solution is needed. This study used qualitative and quantitative methods to design, implement, and pilot a novel sanitation system in Kakuma refugee camp, Kenya. An initial round of 12 pre-implementation focus group discussions (FGDs were conducted with Dinka and Somali residents to understand sanitation practices, perceptions, and needs. FGDs and a supplementary pre-implementation survey informed the development of an innovative sanitation management system that incorporated the provision of urine and liquid-diverting toilets, which separate urine and fecal waste, and a service-based sanitation system that included weekly waste collection. The new system was implemented on a pilot scale for 6 weeks. During the implementation, bi-weekly surveys were administered in each study household to monitor user perceptions and challenges. At the end of the pilot, the sanitation system was assessed using a second round of four post-implementation FGDs. Those who piloted the new sanitation system reported high levels of user satisfaction. Reported benefits included odor reduction, insect/pest reduction, the sitting design, the appropriateness for special populations, and waste collection. However, urine and liquid diversion presented a challenge for users who perform anal washing and for women who had experienced female genital mutilation. Refugee populations are often culturally and ethnically diverse. Using residents' input to inform the development of sanitation solutions can increase user acceptability and provide opportunities to improve sanitation system

On the fog variability over south Asia

Energy Technology Data Exchange (ETDEWEB)

Syed, F.S. [Stockholm University, Department of Meteorology, Stockholm (Sweden); Pakistan Meteorological Department, Islamabad (Pakistan); Koernich, H.; Tjernstroem, M. [Stockholm University, Department of Meteorology, The Bert Bolin Centre for Climate Research, Stockholm (Sweden)

2012-12-15

An increasing trend in fog frequencies over south Asia during winter in the last few decades has resulted in large economical losses and has caused substantial difficulties in the daily lives of people. In order to better understand the fog phenomenon, we investigated the climatology, inter-annual variability and trends in the fog occurrence from 1976 to 2010 using observational data from 82 stations, well distributed over India and Pakistan. Fog blankets large area from Pakistan to Bangladesh across north India from west to east running almost parallel to south of the Himalayas. An EOF analysis revealed that the fog variability over the whole region is coupled and therefore must be governed by some large scale phenomenon on the inter-annual time scale. Significant positive trends were found in the fog frequency but this increase is not gradual, as with the humidity, but comprises of two distinct regimes shifts, in 1990 and 1998, with respect to both mean and variance. The fog is also detected in ERA-Interim 3 hourly, surface and model level forecast data when using the concept of ''cross-over temperature'' combined with boundary layer stability. This fog index is able to reproduce the regime shift around 1998 and shows that the method can be applied to analyze fog over south Asia. The inter-annual variability seems to be associated with the wave train originating from the North Atlantic in the upper troposphere that when causing higher pressure over the region results in an increased boundary layer stability and surface-near relative humidity. The trend and shifts in the fog occurrence seems to be associated with the gradual increasing trend in relative humidity from 1990 onwards. (orig.)

Gene conversion and DNA sequence polymorphism in the sex-determination gene fog-2 and its paralog ftr-1 in Caenorhabditis elegans.

Science.gov (United States)

Rane, Hallie S; Smith, Jessica M; Bergthorsson, Ulfar; Katju, Vaishali

2010-07-01

Gene conversion, a form of concerted evolution, bears enormous potential to shape the trajectory of sequence and functional divergence of gene paralogs subsequent to duplication events. fog-2, a sex-determination gene unique to Caenorhabditis elegans and implicated in the origin of hermaphroditism in this species, resulted from the duplication of ftr-1, an upstream gene of unknown function. Synonymous sequence divergence in regions of fog-2 and ftr-1 (excluding recent gene conversion tracts) suggests that the duplication occurred 46 million generations ago. Gene conversion between fog-2 and ftr-1 was previously discovered in experimental fog-2 knockout lines of C. elegans, whereby hermaphroditism was restored in mutant obligately outcrossing male-female populations. We analyzed DNA-sequence variation in fog-2 and ftr-1 within 40 isolates of C. elegans from diverse geographic locations in order to evaluate the contribution of gene conversion to genetic variation in the two gene paralogs. The analysis shows that gene conversion contributes significantly to DNA-sequence diversity in fog-2 and ftr-1 (22% and 34%, respectively) and may have the potential to alter sexual phenotypes in natural populations. A radical amino acid change in a conserved region of the F-box domain of fog-2 was found in natural isolates of C. elegans with significantly lower fecundity. We hypothesize that the lowered fecundity is due to reduced masculinization and less sperm production and that amino acid replacement substitutions and gene conversion in fog-2 may contribute significantly to variation in the degree of inbreeding and outcrossing in natural populations.

Fog tests performed at Kennedy Space Center on Kodak film type 101-05

Science.gov (United States)

Weinstein, M. S.

1973-01-01

Based on the tests which were conducted, the fogging exhibited by the Kodak 101-05 glass plates when used in the Skylab S-183 experiment carrousels is a chemical fog caused by an outgassing within the carrousel. Testing has not yet been able to determine which chemical causes the fog or just what can be done to eliminate the problem.

fog-2 and the evolution of self-fertile hermaphroditism in Caenorhabditis.

Directory of Open Access Journals (Sweden)

Sudhir Nayak

2005-01-01

Full Text Available Somatic and germline sex determination pathways have diverged significantly in animals, making comparisons between taxa difficult. To overcome this difficulty, we compared the genes in the germline sex determination pathways of Caenorhabditis elegans and C. briggsae, two Caenorhabditis species with similar reproductive systems and sequenced genomes. We demonstrate that C. briggsae has orthologs of all known C. elegans sex determination genes with one exception: fog-2. Hermaphroditic nematodes are essentially females that produce sperm early in life, which they use for self fertilization. In C. elegans, this brief period of spermatogenesis requires FOG-2 and the RNA-binding protein GLD-1, which together repress translation of the tra-2 mRNA. FOG-2 is part of a large C. elegans FOG-2-related protein family defined by the presence of an F-box and Duf38/FOG-2 homogy domain. A fog-2-related gene family is also present in C. briggsae, however, the branch containing fog-2 appears to have arisen relatively recently in C. elegans, post-speciation. The C-terminus of FOG-2 is rapidly evolving, is required for GLD-1 interaction, and is likely critical for the role of FOG-2 in sex determination. In addition, C. briggsae gld-1 appears to play the opposite role in sex determination (promoting the female fate while maintaining conserved roles in meiotic progression during oogenesis. Our data indicate that the regulation of the hermaphrodite germline sex determination pathway at the level of FOG-2/GLD-1/tra-2 mRNA is fundamentally different between C. elegans and C. briggsae, providing functional evidence in support of the independent evolution of self-fertile hermaphroditism. We speculate on the convergent evolution of hermaphroditism in Caenorhabditis based on the plasticity of the C. elegans germline sex determination cascade, in which multiple mutant paths yield self fertility.

Vegetation pattern formation in a fog-dependent ecosystem.

Science.gov (United States)

Borthagaray, Ana I; Fuentes, Miguel A; Marquet, Pablo A

2010-07-07

Vegetation pattern formation is a striking characteristic of several water-limited ecosystems around the world. Typically, they have been described on runoff-based ecosystems emphasizing local interactions between water, biomass interception, growth and dispersal. Here, we show that this situation is by no means general, as banded patterns in vegetation can emerge in areas without rainfall and in plants without functional root (the Bromeliad Tillandsia landbeckii) and where fog is the principal source of moisture. We show that a simple model based on the advection of fog-water by wind and its interception by the vegetation can reproduce banded patterns which agree with empirical patterns observed in the Coastal Atacama Desert. Our model predicts how the parameters may affect the conditions to form the banded pattern, showing a transition from a uniform vegetated state, at high water input or terrain slope to a desert state throughout intermediate banded states. Moreover, the model predicts that the pattern wavelength is a decreasing non-linear function of fog-water input and slope, and an increasing function of plant loss and fog-water flow speed. Finally, we show that the vegetation density is increased by the formation of the regular pattern compared to the density expected by the spatially homogeneous model emphasizing the importance of self-organization in arid ecosystems. (c) 2010 Elsevier Ltd. All rights reserved.

Vehicle license plate recognition in dense fog based on improved atmospheric scattering model

Science.gov (United States)

Tang, Chunming; Lin, Jun; Chen, Chunkai; Dong, Yancheng

2018-04-01

An effective method based on improved atmospheric scattering model is proposed in this paper to handle the problem of the vehicle license plate location and recognition in dense fog. Dense fog detection is performed firstly by the top-hat transformation and the vertical edge detection, and the moving vehicle image is separated from the traffic video image. After the vehicle image is decomposed into two layers: structure and texture layers, the glow layer is separated from the structure layer to get the background layer. Followed by performing the mean-pooling and the bicubic interpolation algorithm, the atmospheric light map of the background layer can be predicted, meanwhile the transmission of the background layer is estimated through the grayed glow layer, whose gray value is altered by linear mapping. Then, according to the improved atmospheric scattering model, the final restored image can be obtained by fusing the restored background layer and the optimized texture layer. License plate location is performed secondly by a series of morphological operations, connected domain analysis and various validations. Characters extraction is achieved according to the projection. Finally, an offline trained pattern classifier of hybrid discriminative restricted boltzmann machines (HDRBM) is applied to recognize the characters. Experimental results on thorough data sets are reported to demonstrate that the proposed method can achieve high recognition accuracy and works robustly in the dense fog traffic environment during 24h or one day.

Observations of radiation fog chemistry in the Eastern United States

Science.gov (United States)

Straub, D.; Hutchings, J.; Herckes, P.

2010-07-01

The chemical composition of radiation fog in the Mid-Atlantic region of the United States has been the focus of an ongoing field campaign based in Selinsgrove, PA. This field study was established to provide a long term record that can be used to identify the effects of meteorology and air mass source regions on fog composition and to shed light on the role that fog can play in the production of secondary inorganic and organic aerosol mass. In the United States, studies that focus on radiation fog have been relatively rare. For the most part, they have been limited geographically to the Central Valley of California, though individual studies have also been conducted in the Central United States and along the Texas-Louisiana Gulf Coast. Sample collection for the current study began during the fall of 2007. Through 2009, samples from 25 radiation fog events have been obtained. A Caltech Heated Rod Cloudwater Collector (CHRCC) having a Dp50 of approximately 8 microns was used to collect one fog sample per event. Samples were typically collected between 2:00 AM and 7:00 AM under conditions of light winds, clear skies, and recent rainfall. Sample volumes ranged from 2.9 ml to 150 ml. Following collection, samples were analyzed for pH and then one of the following: major inorganic ions, dissolved total organic carbon, N-nitrosodimethylamine (NDMA), metals, or organic speciation. Through 2009, sample pH varied between 4.28 and 6.86 and averaged 5.03 based on H+ concentration. Ammonium and sulfate were found to be the most abundant ionic species in the fog samples. Sufficient ammonium was detected in nearly every sample to fully neutralize nitrate and sulfate. The concentrations of sulfate, nitrate, and ammonium observed in this study were lower than values reported in the literature for most other cloud and fog studies conducted in the US. Due to significant ammonium input, pH in the current study was higher than most other studies. Concentrations of total organic carbon

Organic matter in central California radiation fogs.

Science.gov (United States)

Herckes, Pierre; Lee, Taehyoung; Trenary, Laurie; Kang, Gongunn; Chang, Hui; Collett, Jeffrey L

2002-11-15

Organic matter was studied in radiation fogs in the San Joaquin Valley of California during the California Regional Particulate Air Quality Study (CRPAQS). Total organic carbon (TOC) concentrations ranged from 2 to 40 ppm of C. While most organic carbon was found in solution as dissolved organic carbon (DOC), 23% on average was not dissolved inside the fog drops. We observe a clear variation of organic matter concentration with droplet size. TOC concentrations in small fog drops (fogwater, consistent with the enrichment of the organic matter in smaller fog drops with lower terminal settling velocities.

Social Perspectives on the Sanitation Challenge

NARCIS (Netherlands)

Vliet, van B.J.M.; Spaargaren, G.; Oosterveer, P.J.M.

2010-01-01

In developed countries the sanitation challenge is to initiate a transition from strongly centralized, water-based infrastructure regimes towards more sustainable, source-separation oriented, sanitation regimes. This calls for social scientific research and demonstration on different levels and

Characterization of polycyclic aromatic hydrocarbons in fog-rain events.

Science.gov (United States)

Li, Xiang; Li, Pengfei; Yan, Lili; Chen, Jianmin; Cheng, Tiantao; Xu, Shifen

2011-11-01

Atmospheric polycyclic aromatic hydrocarbons (PAHs) mainly originate from incomplete combustion or pyrolysis of materials containing carbon and hydrogen. They exist in gas and particle phases, as well as dissolved or suspended in precipitation (fog or rain). Current studies in atmospheric PAHs are predominantly focused on fog and rainwater samples. Some sampling difficulties are associated with fog samples. This study presented the first observation of the characteristics of PAHs in fog samples using a solid phase microextraction (SPME) technique. Eighteen fog samples were collected during ten fog events from March to December 2009 in the Shanghai area. PAHs were extracted by SPME and analyzed by gas chromatography-mass spectrometry (GC-MS). As the compounds were partially soluble in water, with solubility decreasing with increasing molecular weight, low molecular weight (LMW) PAH compounds were universally found in the fog water samples. Naphthalene (NaP), phenanthrene (Phe), anthracene (Ant) and fluoranthene (Flo) were dominant compounds in fog water. The total PAH concentration in fog water ranged from 0.03 to 6.67 μg L(-1) (mean of 1.06 μg L(-1)), and was much higher in winter than in summer. The concentration of PAHs in fog or rain water decreased after undergoing a pre-rain or pre-fog wash. The average concentration of PAHs was higher in fog than in rain. Diagnostic ratio analysis suggested that petroleum and combustion were the dominant contributors to PAHs in urban Shanghai. Backward trajectories were calculated to determine the origin of the air masses, showing that air masses were mostly from the northeast territory.

Extinction of Light during the Fog Life Cycle: a Result from the ParisFog Experiment

International Nuclear Information System (INIS)

Elias, T.; Haeffelin, M.; Drobinski, P.; Gomes, L.; Rangognio, J.; Bergot, T.; Chazette, P.; Raut, J.-C.; Colomb, M.

2009-01-01

Data set acquired by five particle-dedicated instruments set up on the SIRTA experimental site during the ParisFog field campaign are exploited to document microphysical properties of particles contributing to extinction of visible radiation in variable situations. The case study is a 48-hour period when atmospheric conditions are highly variable: relative humidity changes between 50 and 100%, visibility ranges between 35000 and 65 m, the site is either downwind Paris area either under maritime influence. A dense and homogeneous fog formed by radiative cooling during the 18-19 February night. In 7 hours, visibility decreases from 26 000 m to 65 m, because of transported pollution (factor 3 in visibility reduction), aerosol hydration (factor 20) and aerosol activation (factor 6). According to Mie theory, extinction in clear-sky polluted and unpolluted regimes is due equally to Aitken and accumulation modes. Extinction in haze is due to hydrated aerosols distributed in the accumulation mode, for diameter smaller than 2 μm. Hydrated aerosols of the accumulation mode still contribute to 20-30% extinction in the fog. Measurements show that fog droplets, with diameter included between 2 and 10 μm, contribute to 40% extinction during the first hours of the fog.

Estimating fog-top height through near-surface micrometeorological measurements

NARCIS (Netherlands)

Román-Cascón, Carlos; Yagüe, Carlos; Steeneveld, Gert Jan; Sastre, Mariano; Arrillaga, Jon Ander; Maqueda, Gregorio

2016-01-01

Fog-top height (fog thickness) is very useful information for aircraft maneuvers, data assimilation/validation of Numerical Weather Prediction models or nowcasting of fog dissipation. This variable is usually difficult to determine, since the fog-layer top cannot be observed from the surface. In

Contribution of nitrogen oxides to the acidification of rain (part 2). Evaluation of nitrate production mechanisms in a droplet by fog chemical model simulation

Energy Technology Data Exchange (ETDEWEB)

Takahashi, A. (and others) (CRIEPI, Komae-shi (Japan). Komae Research Lab.)

1994-01-01

The fog chemical model developed in the previous work was applied to various types of fog. Simulated results of Cl[sup -], NO[sub 3][sup -] and SO[sub 4][sup 2-] concentrations in fogwater by the fog chemical model almost agreed with observed values in case the fog total ionic concentration was above 1000 [mu]eg/1. The chemical compositions of ideal water droplets formed under various atmospheric conditions based on observation data were predicted by the fog chemical model. About 80% of HNO[sub 3] and HCl in the atmosphere were scavenged by the droplets in all the cases. SO[sub 2] scavenging ratio by a droplet was dependent mainly on the pH of the droplet. When the droplet pH was decreased by dissolution of HNO[sub 3] and HCl, aqueous phase sulfate production was inhibited by decrease of SO[sub 2] solubility in the droplet. Contribution of HNO[sub 3] in the atmosphere was larger than that of SO[sub 2] to the acidification of highly acidic fogwater observed in Kanto district. In addition, HCl was considered to play an important role, as well as HNO[sub 3], in the acidification of fogwater.

Estimating fog-top height through near-surface micrometeorological measurements

OpenAIRE

Román Cascón, Carlos; Yagüe Anguis, Carlos; Steeneveld, Gert-Jan; Sastre, Mariano; Arrillaga, Jon Ander; Maqueda Burgos, Gregorio

2016-01-01

Fog-top height (fog thickness) is very useful information for aircraft maneuvers, data assimilation/validation of Numerical Weather Prediction models or nowcasting of fog dissipation. This variable is usually difficult to determine, since the fog-layer top cannot be observed from the surface. In some cases, satellite data, ground remote sensing instruments or atmospheric soundings are used to provide approximations of fog-top height. These instruments are expensive and their data not always a...

A UAV-Based Fog Collector Design for Fine-Scale Aerobiological Sampling

Science.gov (United States)

Gentry, Diana; Guarro, Marcello; Demachkie, Isabella Siham; Stumfall, Isabel; Dahlgren, Robert P.

2017-01-01

Airborne microbes are found throughout the troposphere and into the stratosphere. Knowing how the activity of airborne microorganisms can alter water, carbon, and other geochemical cycles is vital to a full understanding of local and global ecosystems. Just as on the land or in the ocean, atmospheric regions vary in habitability; the underlying geochemical, climatic, and ecological dynamics must be characterized at different scales to be effectively modeled. Most aerobiological studies have focused on a high level: 'How high are airborne microbes found?' and 'How far can they travel?' Most fog and cloud water studies collect from stationary ground stations (point) or along flight transects (1D). To complement and provide context for this data, we have designed a UAV-based modified fog and cloud water collector to retrieve 4D-resolved samples for biological and chemical analysis.Our design uses a passive impacting collector hanging from a rigid rod suspended between two multi-rotor UAVs. The suspension design reduces the effect of turbulence and potential for contamination from the UAV downwash. The UAVs are currently modeled in a leader-follower configuration, taking advantage of recent advances in modular UAVs, UAV swarming, and flight planning.The collector itself is a hydrophobic mesh. Materials including Tyvek, PTFE, nylon, and polypropylene monofilament fabricated via laser cutting, CNC knife, or 3D printing were characterized for droplet collection efficiency using a benchtop atomizer and particle counter. Because the meshes can be easily and inexpensively fabricated, a set can be pre-sterilized and brought to the field for 'hot swapping' to decrease cross-contamination between flight sessions or use as negative controls.An onboard sensor and logging system records the time and location of each sample; when combined with flight tracking data, the samples can be resolved into a 4D volumetric map of the fog bank. Collected samples can be returned to the lab for

Evaluation of sanitizing efficacy of acetic acid on Piper betle leaves and its effect on antioxidant properties.

Science.gov (United States)

Singla, Richu; Ganguli, Abhijit; Ghosh, Moushumi; Sohal, Sapna

2009-01-01

The sanitizing efficacy of acetic acid and its effect on health beneficial properties of Piper betle leaves were determined. Betel leaves artificially inoculated with Aeromonas, Salmonella and Yersinia were subjected to organic acid (citric acid, acetic acid and lactic acid) treatment. Pathogen populations reduced by 4 log upon individual inoculation and up to 2 log in a mixed cocktail following treatment with 2% acetic acid during storage up to 20 h at 28 degrees C, indicating a residual antimicrobial effect on pathogen during storage. Antioxidant potential ethanolic extracts of both raw and treated P. betle leaves were assayed for free radical scavenging activities against 2,2-diphenyl-1-picryhydrazyl. Polyphenols, flavonoids and the reducing power of treated and untreated P. betle were also compared. No significant (P>0.05) changes were observed in antioxidant status; flavonoids, polyphenols and reducing power of treated betel leaves. Results indicate the feasibility of a simple intervention strategy for inactivating pathogens in edible leaves of P. betle.

A Hybrid Scheme for Fine-Grained Search and Access Authorization in Fog Computing Environment

Science.gov (United States)

Xiao, Min; Zhou, Jing; Liu, Xuejiao; Jiang, Mingda

2017-01-01

In the fog computing environment, the encrypted sensitive data may be transferred to multiple fog nodes on the edge of a network for low latency; thus, fog nodes need to implement a search over encrypted data as a cloud server. Since the fog nodes tend to provide service for IoT applications often running on resource-constrained end devices, it is necessary to design lightweight solutions. At present, there is little research on this issue. In this paper, we propose a fine-grained owner-forced data search and access authorization scheme spanning user-fog-cloud for resource constrained end users. Compared to existing schemes only supporting either index encryption with search ability or data encryption with fine-grained access control ability, the proposed hybrid scheme supports both abilities simultaneously, and index ciphertext and data ciphertext are constructed based on a single ciphertext-policy attribute based encryption (CP-ABE) primitive and share the same key pair, thus the data access efficiency is significantly improved and the cost of key management is greatly reduced. Moreover, in the proposed scheme, the resource constrained end devices are allowed to rapidly assemble ciphertexts online and securely outsource most of decryption task to fog nodes, and mediated encryption mechanism is also adopted to achieve instantaneous user revocation instead of re-encrypting ciphertexts with many copies in many fog nodes. The security and the performance analysis show that our scheme is suitable for a fog computing environment. PMID:28629131

A Hybrid Scheme for Fine-Grained Search and Access Authorization in Fog Computing Environment.

Science.gov (United States)

Xiao, Min; Zhou, Jing; Liu, Xuejiao; Jiang, Mingda

2017-06-17

In the fog computing environment, the encrypted sensitive data may be transferred to multiple fog nodes on the edge of a network for low latency; thus, fog nodes need to implement a search over encrypted data as a cloud server. Since the fog nodes tend to provide service for IoT applications often running on resource-constrained end devices, it is necessary to design lightweight solutions. At present, there is little research on this issue. In this paper, we propose a fine-grained owner-forced data search and access authorization scheme spanning user-fog-cloud for resource constrained end users. Compared to existing schemes only supporting either index encryption with search ability or data encryption with fine-grained access control ability, the proposed hybrid scheme supports both abilities simultaneously, and index ciphertext and data ciphertext are constructed based on a single ciphertext-policy attribute based encryption (CP-ABE) primitive and share the same key pair, thus the data access efficiency is significantly improved and the cost of key management is greatly reduced. Moreover, in the proposed scheme, the resource constrained end devices are allowed to rapidly assemble ciphertexts online and securely outsource most of decryption task to fog nodes, and mediated encryption mechanism is also adopted to achieve instantaneous user revocation instead of re-encrypting ciphertexts with many copies in many fog nodes. The security and the performance analysis show that our scheme is suitable for a fog computing environment.

Measurement of fog and cloud water constituents - results of the Stuttgart-Hohenheim campaign

International Nuclear Information System (INIS)

Lammel, G.; Metzig, G.; Ziereis, H.; Klumpp, J.

1993-01-01

A radiation fog event in a highly polluted environment was characterized physically and chemically. Various sampling techniques, including size resolved, and an almost complete set of chemical-analytical methods were applied. Methods for conservation and sensitive determination of reduced nitrogen and sulfur compounds in the liquid phase are presented for the first time. Besides other pollutants, the air mass was heavily loaded by carbonaceous material (carbon accounted for more than one third of the particulate mass). The most prominent trace species in the fog droplets were sulfate, nitrate and ammonium ions. Concentrations as high as 130 mg/I and 50 mg/I, each, were achieved prior to dissolution of the fog in the small and large droplet fraction, respectively. The acidity was negligible, however. The fraction of reduced sulfur compounds was 7% by average, up to 79%, however, at the onset of the fog event. As found in the context of earlier field campaigns, large droplets were less pollutant loaded than small droplets. Besides gas scavenging and - in the case of SO 2 - succeeding oxidation, the scavenging of particulate matter night have contributed to the liquid phase chemical composition. (orig.) [de

Water fog inerting of hydrogen-air mixtures

International Nuclear Information System (INIS)

Zalosh, R.G.; Bajpai, S.N.

1982-01-01

Laboratory tests have been conducted to determine the effects of water fog density, droplet diameter and temperature on the lower flammable limit (LFL) of hydrogen-air-steam mixtures. Five different fog nozzles were used to generate dense fogs with volume mean drop diameters ranging from 20 micro-meters to 115 micro-meters. At 20 0 C, these nozzles marginally raised the hydrogen LFL from 4.0 vol.% hydrogen to typically 4.8%, with one exceptional nozzle producing an LFL of 7.2%. At 50 0 C, the LFL in the presence of dense fog ranged from 5.0 to 7.9%, while at 70 0 C, the range was 5.9 to 8.5%. Fog densities required to achieve a given level of partial inerting increased with approximately the second power of average drop diameter, as predicted by a theoretical flame quenching analysis

History and Technology of Terra Preta Sanitation

Directory of Open Access Journals (Sweden)

Sabino De Gisi

2014-03-01

Full Text Available In order to reach the Millennium Development Goals for significantly reducing the number of people without access to adequate sanitation, new holistic concepts are needed focusing on economically feasible closed-loop ecological sanitation systems rather than on expensive end-of-pipe technologies. An analysis of a former civilization in the Amazon (nowadays Brazil highlights the possibility to close the loop with a more sustainable lifestyle integrating soil fertility, food security, waste management, water protection and sanitation, renewable energy. Terra Preta do Indio is the anthropogenic black soil produced by ancient cultures through the conversion of bio-waste, fecal matter and charcoal into long-term fertile soils. These soils have maintained high amounts of organic carbon several thousand years after they were abandoned. Deriving from these concepts, Terra Preta Sanitation (TPS has been re-developed and adopted. TPS includes urine diversion, addition of a charcoal mixture and is based on lactic-acid-fermentation with subsequent vermicomposting. Lacto-fermentation is a biological anaerobic process that generates a pre-stabilization of the mixture. The main advantage of lacto-fermentation is that no gas and no odor is produced. What makes it particularly interesting for in-house systems even in urban areas. Instead, vermicomposting is an aerobic decomposition process of the pre-digested materials by the combined action of earthworms and microorganisms. It transforms the carbon and nutrients into the deep black, fertile and stable soil that can be utilized in agriculture. No water, ventilation or external energy is required. Starting from ancient Amazonian civilizations traditional knowledge, the aim of this work is to present TPS systems adopted nowadays.

1995 Integrated Monitoring Study: Fog measurements in the Southern San Joaquin Valley - preliminary results

Energy Technology Data Exchange (ETDEWEB)

Collett, J. Jr.; Bator, A.; Sherman, D.E. [Colorado State Univ., Fort Collins, CO (United States)] [and others

1996-12-31

Fogs were sampled at three ground-based stations in the southern portion of California`s San Joaquin Valley as part of the winter component of the 1995 Integrated Monitoring Study (IMS95). The three sampling sites included two urban locations (Bakersfield and Fresno) and one rural location (near the Kern Wildlife Refuge). Both bulk and drop size-fractionated samples were collected at each site. Several fog events were sampled, with three periods of extensive fog coverage that included all three sampling sites. Results of preliminary data analysis are presented. Fog collected at the sites was generally quite basic. Most bulk fog samples had pH values above 6 reflecting strong inputs from ammonia. Occasional strong sulfur plumes at Bakersfield, however, tended to lower the fog pH. Aside from these periods, nitrate was generally present at much higher concentrations in the fog than sulfate. Decreases in fogwater loadings of major species over the course of one extended fog episode at Fresno suggest significant deposition was occurring to the surface, consistent with observations of substantial droplet fluxes to exposed surfaces during that period. 16 refs., 7 figs., 1 tab.

Thermally Optimized Polarization-Maintaining Photonic Crystal Fiber and Its FOG Application.

Science.gov (United States)

Zhang, Chunxi; Zhang, Zhihao; Xu, Xiaobin; Cai, Wei

2018-02-13

In this paper, we propose a small-diameter polarization-maintaining solid-core photonic crystal fiber. The coating diameter, cladding diameter and other key parameters relating to the thermal properties were studied. Based on the optimized parameters, a fiber with a Shupe constant 15% lower than commercial photonic crystal fibers (PCFs) was fabricated, and the transmission loss was lower than 2 dB/km. The superior thermal stability of our fiber design was proven through both simulation and measurement. Using the small-diameter fiber, a split high precision fiber optic gyro (FOG) prototype was fabricated. The bias stability of the FOG was 0.0023 °/h, the random walk was 0.0003 °/ h , and the scale factor error was less than 1 ppm. Throughout a temperature variation ranging from -40 to 60 °C, the bias stability was less than 0.02 °/h without temperature compensation which is notably better than FOG with panda fiber. As a result, the PCF FOG is a promising choice for high precision FOG applications.

Caltrans fog detection and warning system.

Science.gov (United States)

2009-01-01

The California Department of Transportation (Caltrans) has implemented a fog detection and warning system on Highway 99 near Fresno. The entire central valley region is susceptible to Tule fog, which can reduce visibility tremendously, sometimes to n...

Analysis of prospective systems for fog warnings : [summary].

Science.gov (United States)

2013-01-01

Florida nearly leads the nation in fatal vehicle crashes due to fog and smoke conditions. Between 2002 and 2009, 299 people in Florida died in vehicle crashes related to fog and smoke conditions. In January 2012, heavy fog and smoke were blamed for a...

Enhanced toxicity of aerosol in fog conditions in the Po Valley, Italy

Science.gov (United States)

Decesari, Stefano; Sowlat, Mohammad Hossein; Hasheminassab, Sina; Sandrini, Silvia; Gilardoni, Stefania; Facchini, Maria Cristina; Fuzzi, Sandro; Sioutas, Constantinos

2017-06-01

While numerous studies have demonstrated the association between outdoor exposure to atmospheric particulate matter (PM) and adverse health effects, the actual chemical species responsible for PM toxicological properties remain a subject of investigation. We provide here reactive oxygen species (ROS) activity data for PM samples collected at a rural site in the Po Valley, Italy, during the fog season (i.e., November-March). We show that the intrinsic ROS activity of Po Valley PM, which is mainly composed of biomass burning and secondary aerosols, is comparable to that of traffic-related particles in urban areas. The airborne concentration of PM components responsible for the ROS activity decreases in fog conditions, when water-soluble species are scavenged within the droplets. Due to this partitioning effect of fog, the measured ROS activity of fog water was contributed mainly by water-soluble organic carbon (WSOC) and secondary inorganic ions rather than by transition metals. We found that the intrinsic ROS activity of fog droplets is even greater (> 2.5 times) than that of the PM on which droplets are formed, indicating that redox-active compounds are not only scavenged from the particulate phase, but are also produced within the droplets. Therefore, even if fog formation exerts a scavenging effect on PM mass and redox-active compounds, the aqueous-phase formation of reactive secondary organic compounds can eventually enhance ROS activity of PM when fog evaporates. These findings, based on a case study during a field campaign in November 2015, indicate that a significant portion of airborne toxicity in the Po Valley is largely produced by environmental conditions (fog formation and fog processing) and not simply by the emission and transport of pollutants.

Calculation and measurement of fog droplet size

International Nuclear Information System (INIS)

Laali, A.R.; Courant, J.J.; Kleitz, A.

1991-01-01

This paper outlines the elements involved in calculation and measurement of fog droplet size in steam turbines. The condensation calculations are performed for a 600 MW LP fossil fired, and for a 900 MW LP nuclear turbine. A simplified method based on classical condensation theory is used for these calculations. The fog droplet size measurement are carried out downstream of the last moving blades of these turbines in order to validate the program. The comparison between the results could lead to a better understanding of the condensation process in steam turbines. Some large droplet (re-entrained droplet) measurements are also taken using a microvideo probe

Characteristics of a Dry Fog Ionizer

International Nuclear Information System (INIS)

Murata, Y; Kudo, Y; Yonezawa, M

2008-01-01

The newly developed 'Dry Fog Ionizer' generates charged dry fog. The dry fog consists of very fine water droplets 8μm in mean diameter. This system consists of a dry fog nozzle (H.Ikeuchi and Co., LTD.), a ring electrode for induction charging (50mm outside diameter, and 10mm thick) in front of the nozzle, and a fan for dissipating charged dry fog. The ring electrode is DC or AC-biased and fine droplets ejected from the nozzle are electrified by induction charging. The particle size of the charged water droplets are reduced through evaporation during the transporting process by air flow, and completely evaporate approximately 2m from the nozzle under normal atmospheric conditions (25 deg. C, 60%R.H.) leaving high density ions. Using this system, high density ionic space charge can be realized in a remote spot from the ionizer. By this principle, the Dry Fog Ionizer shows strong charge-eliminating ability in the region away from the ionizer. When a dc bias of 5kV was applied to a ring electrode with the rate of water flow from the nozzle being 21/h, an ionic space-charge density of 1200nC /m 3 was able to be obtained at a distance 2m away from the ionizer, which was 10 2 times the value produced by an ordinary corona-type ionizer with an air blower.

Daily lifestyles in the fog and haze weather.

Science.gov (United States)

Cai, Dong-Ping; He, Yong-Ming

2016-01-01

China is being plagued by a large-scaled lasting fog and haze, under which people have to work and live. Therefore, it matters to do what we can to minimize the adverse impact of the fog and haze on individual health on a daily basis. Relative literatures on the fog and haze have been searched and reviewed. Particular attention has been paid to the literatures on the adverse impact of the fog and haze on the people's health and on the ways minimizing this impact. Coming across the weather of fog and haze, appropriate measures taken can minimize its adverse impact on individuals on a daily basis. The measures included vitamin intake, water drinking, air cleaning indoors, stay-at-home, and mask wearing outdoors. These measures are simple and proven effective. Simple and effective measures seem to be sufficient to minimizing the adverse impact of the fog and haze on the individual's health on a daily basis. Lifestyle changes, awareness of environment protection, energy conservation, and new and clean energy use are ultimate ways to curb the air pollution and reduce the occurrence of the fog and haze.

Transforming Markets, Increasing Access : Early Lessons on Base-of-the-Pyramid Market Development in Sanitation

OpenAIRE

Danielle Pedi; Will Davies

2013-01-01

The four billion global consumers at the base of the pyramid (BOP) - those earning less than two dollars a day - are increasingly recognized by the private sector as a major untapped market segment. The sanitation industry is no exception. Across sub-Saharan Africa, more than half of the population lives without access to minimum levels of improved sanitation. Beyond the reach of urban sew...

The lightning striking probability for offshore wind turbine blade with salt fog contamination

Science.gov (United States)

Li, Qingmin; Ma, Yufei; Guo, Zixin; Ren, Hanwen; Wang, Guozheng; Arif, Waqas; Fang, Zhiyang; Siew, Wah Hoon

2017-08-01

The blades of an offshore wind turbine are prone to be adhered with salt fog after long-time exposure in the marine-atmosphere environment, and salt fog reduces the efficiency of the lightning protection system. In order to study the influence of salt fog on lightning striking probability (LSP), the lightning discharge process model for the wind turbine blade is adopted in this paper considering the accumulation mechanism of surface charges around the salt fog area. The distribution of potential and electric field with the development of the downward leader is calculated by COMSOL Multiphysics LiveLink for MATLAB. A quantitative characterization method is established to calculate the LSP base on the average electric field before the return stroke and the LSP distribution of the blade is shown in the form of a graphic view. The simulation results indicate that the receptor and conductor area close to the receptor area are more likely to get struck by lightning, and the LSP increases under the influence of salt fog. The validity of the model is verified by experiments. Furthermore, the receptor can protect the blade from lightning strikes effectively when the lateral distance between the rod electrode and receptor is short. The influence of salt fog on LSP is more obvious if salt fog is close to the receptor or if the scope of salt fog area increases.

Giant-FOG: A new player in ground motion instrumentation

Science.gov (United States)

Guattari, F.; de Toldi, E.; Bigueur, A.; Decitre, J. B.; Ponceau, D.; Sèbe, O.; Frenois, A.; Schindelé, F.; Moluçon, C.; Gaffet, S.; Ducloux, E.; Lefèvre, H.

2017-12-01

Based on recent experiences developing very low noise fiber-optic gyroscopes (FOG), first performance results on very large fiber-optic coils of up to 1m diameter are presented. The goal for constructing large FOGs is to evaluate experimentally the physical limits of this kind of technology and to reach the lowest possible noise. While these experiments are probing the fundamental limits of the FOG technology, they also serves as a first step for a cost effective very low noise laboratory rotational seismometer, which could be a game changer in instrumentation of ground motion. Build a Giant-FOG has several difficulties: The first is winding of the coil, the second concerns the mechanical substrate, and third is related to the measurement. - To our knowledge, a winding machine, large enough to wind coil of a 1 meter diameter, does not exist, but thanks to the iXblue expertise in the manufacturing of winding machines and calibration tables, a hydride system has been designed, merging these two technology to fulfill the requirement of winding a large coil on an adequate rotational platform. The characterization of the wobbles of the system will be presented, since this is a critical parameter for the winding and ultimately the performance. - To achieve the highest attainable measurement sensitivity to the real ground rotation, the design of the mechanical substrate of the coil is critical to reduce as much as possible the sensor sensitivities to environmental noises. A preliminary assessment of the global noise performance of the 1m diameter FOG sensor will be presented. - To demonstrate the on-site performance, the low noise inter-disciplinary underground laboratory (LSBB, Rustrel, France), with a dense array of precisely oriented broad-band seismometers, provides the possibility to compare Large FOG rotation records with Array Derivated Rotation measurement method. Results of different prototypes during the development process will be presented to underline the

Field investigation of physical and chemical mechanisms affecting pollutant concentrations in fog droplets

Energy Technology Data Exchange (ETDEWEB)

Jacob, D.J.; Waldman, J.M.; Munger, J.W.; Hoffmann, M.R.

1984-09-01

High ionic loadings were found in fogwater collected at Bakersfield, California during an extended stagnation episode. The major ions were NH4(+), NO3(-), and SO4(2-), with concentrations usually in the millimolar range. Droplet growth played an important role in determining fogwater concentrations. The amount of solute decreased substantially over the course of each fog event this was attributed, at least in part, to deposition of fog droplets on surfaces. The occurrence of this was attributed, at least in part, to deposition of fog droplets on surfaces. The sulfate fraction in the aerosol increased appreciably over several days of stagnation, but no statistical evidence for in situ S(IV) aqueous-phase oxidation was found. The high ammonia concentrations present were sufficient to neutralize a large fraction of the ambient acidity. As a result, fogwater pH values rarely attained the extremely low values found in other polluted environments. 46 references.

X-ray measurements of water fog density

International Nuclear Information System (INIS)

Camp, A.L.

1982-11-01

Water-fog densities were measured in a laboratory experiment using x-ray diagnostics. Fog densities were measured, varying the flow rate, nozzle type, nozzle configuration, nozzle height above the x-ray beam, and water surface tension. Suspended water volume fractions between 0.0008 and 0.0074 percent were measured. The fog density increases approximately as the square root of the flow rate; the other parameters had little effect on the density

The chemical composition of fogs and clouds in Southern California

Energy Technology Data Exchange (ETDEWEB)

Munger, J.W.

1989-01-01

The major inorganic species in cloud and fog water samples were NH{sub 4}{sup +}, H{sup +}, NO{sub 3}{sup {minus}}, and SO{sub 4}{sup 2{minus}}. Concentrations in fog water samples were 1 - 10 {times} 10{sup {minus}3} M; pH values ranged from {approx equal} 2 to 6. Nitrate usually exceeded sulfate. Acidity depended on the availability of NH{sub 3} from agricultural operations. Stratus cloudwater had somewhat lower concentrations; pH values were in the range 3-4. The major factors accounting for variation in fog- or cloudwater composition were the preexisting aerosol and gas concentrations and variations in liquid water content. Deposition and entrainment or advection of different air masses were also important during extended cloud or fog episodes. The droplet size dependence of cloudwater composition was investigated on one occasion in an intercepted coastal stratus clouds. Concentrations of S(IV) and CH{sub 2}O in the range 100-1000 {mu}M were observed in fogwater from urban sites in Southern California. Lower concentrations were observed in stratus clouds. The high levels of S(IV) and CH{sub 2}O were attributed to the formation of hydroxymethanesulfonate (HMSA), the S(IV) adduct of CH{sub 2}O. Direct measurements of HMSA in fogwater samples from Bakersfield, CA were made by ion-pairing chromatography. Glyoxal and methyglyoxal were observed at concentrations comparable to CH{sub 2}O in fogwater samples from Riverside, CA and in stratus cloudwater samples from sites along the Santa Barbara Channel.

Winter Frost and Fog

Science.gov (United States)

2005-01-01

This somewhat oblique blue wide angle Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the 174 km (108 mi) diameter crater, Terby, and its vicinity in December 2004. Located north of Hellas, this region can be covered with seasonal frost and ground-hugging fog, even in the afternoon, despite being north of 30oS. The subtle, wavy pattern is a manifestation of fog. Location near: 28oS, 286oW Illumination from: upper left Season: Southern Winter

Numerical simulation of diurnally varying thermal environment in a street canyon under haze-fog conditions

Science.gov (United States)

Tan, Zijing; Dong, Jingliang; Xiao, Yimin; Tu, Jiyuan

2015-10-01

The impact of haze-fog on surface temperature, flow pattern, pollutant dispersion and pedestrian thermal comfort are investigated using computational fluid dynamics (CFD) approach based on a three-dimensional street canyon model under different haze-fog conditions. In this study, light extinction coefficient (Kex) is adopted to represent haze-fog pollution level. Numerical simulations are performed for different Kex values at four representative time events (1000 LST, 1300 LST, 1600 LST and 2000 LST). The numerical results suggest that the surface temperature is strongly affected by the haze-fog condition. Surface heating induced by the solar radiation is enhanced by haze-fog, as higher surface temperature is observed under thicker haze-fog condition. Moreover, the temperature difference between sunlit and shadow surfaces is reduced, while that for the two shadow surfaces is slightly increased. Therefore, the surface temperature among street canyon facets becomes more evenly distributed under heavy haze-fog conditions. In addition, flow patterns are considerably altered by different haze-fog conditions, especially for the afternoon (1600 LST) case, in which thermal-driven flow has opposite direction as that of the wind-driven flow direction. Consequently, pollutants such as vehicular emissions will accumulate at pedestrian level, and pedestrian thermal comfort may lower under thicker haze-fog condition.

Acute alcohol intoxication in a child following ingestion of an ethyl-alcohol-based hand sanitizer.

Science.gov (United States)

Hertzog, James H; Radwick, Allison

2015-07-01

While uncommon, ingestion of ethanol-based hand sanitizers by children may be associated with significant intoxication. We report the case of a 7-year-old with acute alcohol intoxication following hand sanitizer ingestion. Alcohol elimination in this patient followed zero-order kinetics with a clearance rate of 22.5 mg/kg/h, consistent with the limited pharmacokinetic information available for children who experience alcohol intoxication from more traditional sources.

Gene response in rice plants treated with continuous fog influenced by pH, was similar to that treated with biotic stress.

Science.gov (United States)

Satoh, Kouji; Saji, Shoko; Ito, Shoko; Shimizu, Hideyuki; Saji, Hikaru; Kikuchi, Shoshi

2014-01-01

Throughout Asia, including Japan, rice plants are cultivated in a wide range of areas from lowlands to highlands and are frequently exposed to fog, including acid fog. Some physiological studies have shown that acid fog can be a stress factor for plants. We analyzed the gene expression profiles of rice plants treated with artificially prepared simulated acid fog (SiAF) or simulated neutral fog (SiNF) for 1 or 7 days. Microarray analysis results suggested that both the SiAF and the SiNF treatments induced the expression of genes involved in the defense and stress responses in rice plants. Induction of such genes was detected in plants treated with SiAF for 1 day, and the number of induced genes increased in plants treated with SiAF for 7 days. The genes for defense and stress responses were also induced by SiNF for 7 days, although they were not induced by SiNF for 1 day. The gene expression profiles of the SiAF-treated and the SiNF-treated plants were compared to those of plants treated with other stress factors. The comparison revealed that both SiAF and SiNF treatments have similar effects to biotic stresses and ozone stress. The genes encoding NADPH oxidase and germin, which function in apoplasts, were also induced by SiAF, SiNF and biotic stresses. These findings suggest that both the SiAF and the SiNF treatments may result in oxidative stress through the apoplastic production of reactive oxygen species.

Security and Privacy in Fog Computing: Challenges

OpenAIRE

Mukherjee, Mithun; Matam, Rakesh; Shu, Lei; Maglaras, Leandros; Ferrag, Mohamed Amine; Choudhry, Nikumani; Kumar, Vikas

2017-01-01

open access article Fog computing paradigm extends the storage, networking, and computing facilities of the cloud computing toward the edge of the networks while offloading the cloud data centers and reducing service latency to the end users. However, the characteristics of fog computing arise new security and privacy challenges. The existing security and privacy measurements for cloud computing cannot be directly applied to the fog computing due to its features, such as mobility, heteroge...

Evaluation of fog predictions and detection.

Science.gov (United States)

2015-03-01

On January 29, 2012 at about 4:00 am a thick fog and smoke caused a multiple car : crash just south of Gainesville, Florida. 11 people were killed and 18 were : hospitalized. Nationally there are about 38,000 fog related accidents which result in : a...

Interdisciplinary Water and Sanitation Project in Burkina Faso

OpenAIRE

船水, 尚行

2017-01-01

Interdisciplinary project on water and sanitation was performed in Burkina Faso from 2010 to 2015. The title of the project was “Development of sustainable water and sanitation systems in the African Sahel region”, and the project was supported by SATREPS (JST and JICA) and collaborated with International Institute of Water and Sanitation (2iE). The main purpose of the project was to develop and demonstrate the new system of water and sanitation based on the concept of “do not mix” and “do no...

Forecasting Advective Sea Fog with the Use of Classification and Regression Tree Analyses for Kunsan Air Base

National Research Council Canada - National Science Library

Lewis, Danielle

2004-01-01

.... To date, there are no suitable methods developed for forecasting advective sea fog at Kunsan, primarily due to a lack of understanding of sea fog formation under various synoptic situations over the Yellow Sea...

Detection of ground fog in mountainous areas from MODIS (Collection 051) daytime data using a statistical approach

Science.gov (United States)

Schulz, Hans Martin; Thies, Boris; Chang, Shih-Chieh; Bendix, Jörg

2016-03-01

The mountain cloud forest of Taiwan can be delimited from other forest types using a map of the ground fog frequency. In order to create such a frequency map from remotely sensed data, an algorithm able to detect ground fog is necessary. Common techniques for ground fog detection based on weather satellite data cannot be applied to fog occurrences in Taiwan as they rely on several assumptions regarding cloud properties. Therefore a new statistical method for the detection of ground fog in mountainous terrain from MODIS Collection 051 data is presented. Due to the sharpening of input data using MODIS bands 1 and 2, the method provides fog masks in a resolution of 250 m per pixel. The new technique is based on negative correlations between optical thickness and terrain height that can be observed if a cloud that is relatively plane-parallel is truncated by the terrain. A validation of the new technique using camera data has shown that the quality of fog detection is comparable to that of another modern fog detection scheme developed and validated for the temperate zones. The method is particularly applicable to optically thinner water clouds. Beyond a cloud optical thickness of ≈ 40, classification errors significantly increase.

Mesh Intercomparisons of Fog Water Collected Yield Insight Into the Nature of Fog-Drip Collection Mechanisms

Science.gov (United States)

Fernandez, D.; Torregrosa, A.; Weiss-Penzias, P. S.; Oliphant, A. J.; Dodge, C.; Bowman, M.; Wilson, S.; Mairs, A. A.; Gravelle, M.; Barkley, T.

2016-12-01

At multiple sites across central CA, several passive fog water collectors have been deployed for the past 3 years. All of the sites employ standard Raschel polypropylene mesh as the fog collection medium and five of them also integrated a novel polypropylene mesh of German manufacture with a 3-dimensional internal structure. Additionally, six metal mesh manufactured by McMaster-Carr of various hole sizing were coated with a POSS-PEMA substance at the Massachusetts Institute of Technology and deployed in parallel with the Raschel mesh at six distinct locations. Finally, fluorine-free versions of the POSS-PEMA substance were generated by NBD Nanotechnology and coated on a much finer mesh substrate. Three of those and one control (uncoated mesh) were deployed at one of the fog collection sites for one season, along with a standard Raschel mesh. Preliminary results from one intercomparison from just one pair of mesh over two seasons seem to reveal a wind speed and also, possibly, a droplet-size dependence on the fog collection efficiency for the mesh. This study will continue to intercompare the various mesh in conjunction with the wind speed and direction data. If a collection efficiency dependence on mesh size or coating is confirmed, it may point to interesting and relevant mechanisms for fog droplet capture and collection hitherto unobserved in field conditions.

Fog Collection on Polyethylene Terephthalate (PET) Fibers: Influence of Cross Section and Surface Structure.

Science.gov (United States)

Azad, M A K; Krause, Tobias; Danter, Leon; Baars, Albert; Koch, Kerstin; Barthlott, Wilhelm

2017-06-06

Fog-collecting meshes show a great potential in ensuring the availability of a supply of sustainable freshwater in certain arid regions. In most cases, the meshes are made of hydrophilic smooth fibers. Based on the study of plant surfaces, we analyzed the fog collection using various polyethylene terephthalate (PET) fibers with different cross sections and surface structures with the aim of developing optimized biomimetic fog collectors. Water droplet movement and the onset of dripping from fiber samples were compared. Fibers with round, oval, and rectangular cross sections with round edges showed higher fog-collection performance than those with other cross sections. However, other parameters, for example, width, surface structure, wettability, and so forth, also influenced the performance. The directional delivery of the collected fog droplets by wavy/v-shaped microgrooves on the surface of the fibers enhances the formation of a water film and their fog collection. A numerical simulation of the water droplet spreading behavior strongly supports these findings. Therefore, our study suggests the use of fibers with a round cross section, a microgrooved surface, and an optimized width for an efficient fog collection.

Benefit of infrared images in visibility appreciation for fog conditions

Science.gov (United States)

Boucher, V.; Dumoulin, J.; Marchetti, M.

2012-04-01

Fog situations induce an increase in both accident probability and severity. They constitue a significant part in accident rate. There is very few means to forecast fog, nor to appreciate its density, and its associated visibility decrease. An approach consists in developing on-board tools to qualify and to quantify the fog, and to improve the visibility within each vehicle. Infrared technology is now more common, so solutions based on this specific spectral band could be considered. LW infrared has demonstrated its value in the case of passenger cars. Its use could be discussed too, in particular in the case of obstacles detection. The study presented here deals mainly with the extraction of a visbility distance from LW thermal images in the presence of fog. A French facility in Clermont-Ferrand allows the generation of fog. It can be generated in day or night conditions. The facility is 30 m long, for a 220 m3 volume. The fog is generated spraying water micro droplets, which size is controlled and measured. Experimental conditions could be adapted through water pressure, water nature as an example. Visibility is appreciated with a device measuring light transmission. In the case of infrared, visibility is obtained through the definition of contrast of an object on a given background. On such a basis, infrared spectral band provides a factor 2 benefit on a conventional roadsign, and of a factor 4 in the case of a heated one, with meteorological visibilty of 20 m. Some theoritical aspects will be described, along with a description of the whole experimental setup.

Experimental Study Of Fog Water Harvesting By Stainless Steel Mesh

Directory of Open Access Journals (Sweden)

Nikhil R. Pawar

2017-06-01

Full Text Available The collection of fog water is a simple and sustainable technology to get hold of fresh water for various purposes. In areas where a substantial amount of fog can be obtained it is feasible to set up a stainless steel as well as black double layer plastic mesh structure for fog water harvesting. The mesh structure is directly exposed to the weather and the fog containing air is pushed through the active mesh surface by the wind. Afterward fog droplets are deposited on the active mesh area which combines to form superior droplets and run down into a gutter to storage by gravity. Fog water harvesting rates show a discrepancy from site to site. The scope of this experimental work is to review fog collection at SCOE Pune campus and to examine factors of success. This study is to synthesize the understanding of fog water harvesting in the institutional era and to analyze its benefits and boundaries for future development. The rate of fog water harvesting depends on the science of fog physics chemistry and its starring role in the hydrological cycle. This technology runs on zero energy and zeroes pollution level with cost of the benefit. The collected or treated clear water mainly could be used for different purposes as per requirement. For further development this technology public as well as government participation is needed.

Baby Shampoo versus Commercial Anti-fogging Solution to Prevent Fogging during Nasal Endoscopy: A Randomized Double-Blinded, Matched-Pair, Equivalent Trial.

Science.gov (United States)

Chainansamit, Seksun; Piromchai, Patorn; Anantpinijwatna, Intira; Kasemsiri, Pornthep; Thanaviratananich, Sanguansak

2015-08-01

To compare the minimization of the fog condensation during nasal endoscopy between a commercial anti-fogging agent and baby shampoo. This randomized double-blinded matched pair study was conducted at the Department of Otorhinolaryngology, Faculty of Medicine, Khon Kaen University during February 4, 2013 to March 14, 2013. The commercial anti-fogging solution (Ultrastop®) and baby shampoo solution (Johnson's® no more tear®) were compared. A computer generated randomization was performed to select the solution applying on the lens for nasal endoscopy of the right nasal cavity. The other solution was then used for the left one. Three passes of endoscopy were performed to examine the floor of the nose, the sphenoethmoidal recess and the middle meatus area which spent about 30 seconds for each time of endoscopy. The time to become foggy on the lens and the preferred solution assessed by the endoscopists were recorded. There were 71 eligible patients recruited in the study, 37 males (52.1%) and 34 females (47.9%). There was no fogging during a 30-second nasal endoscopy either by baby shampoo or commercial anti-fogging solution. However, 9.86% (95% C12.75-16.97) of endoscopists preferred commercial anti-fogging agent, 7.04% (95% CI 0.94-13.14) preferred baby shampoo and 83.10% (95% CI 74.16-92.03) had equal satisfaction. Both agents had no statistically significant difference for preventing foggy on the lens. Baby shampoo is an effective agent to prevent fogging during nasal endoscopy and comparable with the commercial anti-fogging agent.

An improved measurement system for FOG pure lag time with no changing of FOG work status

Science.gov (United States)

Chen, X.; Yang, J. H.; Zhou, Y. L.; Shu, X. W.

2018-05-01

The minimum pure lag time is an important factor for characterizing the dynamic performance of fiber optical gyroscope. It is defined as the time duration from the reception of velocity-shock signal to the output of corresponding fiber-optic gyroscope data. Many engineering projects have required for this index specifically, so the measurement of the minimum pure lag time is highly demanded. In typically measurement system, the work status of tested FOG has to be changed. In this work, a FOG pure lag time measurement system without changing the work status of the FOG has been demonstrated. During the operation of this test system, the impact structure generated a shock towards the FOG, and the pure lag time was measured through data processing analysis. The design scheme and test principle have been researched and analyzed in detail. And a prototype has been developed and used for experiment successfully. This measurement system can realize a measurement accuracy of better than ±3 μs and a system resolution of 108.6ns.

Fog interception by Ball moss (Tillandsia recurvata)

Science.gov (United States)

Guevara-Escobar, A.; Cervantes-Jiménez, M.; Suzán-Azpiri, H.; González-Sosa, E.; Hernández-Sandoval, L.; Malda-Barrera, G.; Martínez-Díaz, M.

2011-08-01

Interception losses are a major influence in the water yield of vegetated areas. For most storms, rain interception results in less water reaching the ground. However, fog interception can increase the overall water storage capacity of the vegetation and once the storage is exceeded, fog drip is a common hydrological input. Fog interception is disregarded in water budgets of semiarid regions, but for some plant communities, it could be a mechanism offsetting evaporation losses. Tillandsia recurvata is a cosmopolitan epiphyte adapted to arid habitats where fog may be an important water source. Therefore, the interception storage capacity by T. recurvata was measured in controlled conditions and applying simulated rain or fog. Juvenile, vegetative specimens were used to determine the potential upperbound storage capacities. The storage capacity was proportional to dry weight mass. Interception storage capacity (Cmin) was 0.19 and 0.56 mm for rainfall and fog respectively. The coefficients obtained in the laboratory were used together with biomass measurements for T. recurvata in a xeric scrub to calculate the depth of water intercepted by rain. T. recurvata contributed 20 % to the rain interception capacity of their shrub hosts: Acacia farnesiana and Prosopis laevigata and; also potentially intercepted 4.8 % of the annual rainfall. Nocturnal stomatic opening in T. recurvata is not only relevant for CO2 but for water vapor, as suggested by the higher weight change of specimens wetted with fog for 1 h at dark in comparison to those wetted during daylight (543 ± 77 vs. 325 ± 56 mg, p = 0.048). The storage capacity of T. recurvata leaf surfaces could increase the amount of water available for evaporation, but as this species colonise montane forests, the effect could be negative on water recharge, because potential storage capacity is very high, in the laboratory experiments it took up to 12 h at a rate of 0.26 l h-1 to reach saturation conditions when fog was applied.

Fog interception by Ball moss (Tillandsia recurvata

Directory of Open Access Journals (Sweden)

G. Malda-Barrera

2011-08-01

Full Text Available Interception losses are a major influence in the water yield of vegetated areas. For most storms, rain interception results in less water reaching the ground. However, fog interception can increase the overall water storage capacity of the vegetation and once the storage is exceeded, fog drip is a common hydrological input. Fog interception is disregarded in water budgets of semiarid regions, but for some plant communities, it could be a mechanism offsetting evaporation losses. Tillandsia recurvata is a cosmopolitan epiphyte adapted to arid habitats where fog may be an important water source. Therefore, the interception storage capacity by T. recurvata was measured in controlled conditions and applying simulated rain or fog. Juvenile, vegetative specimens were used to determine the potential upperbound storage capacities. The storage capacity was proportional to dry weight mass. Interception storage capacity (Cmin was 0.19 and 0.56 mm for rainfall and fog respectively. The coefficients obtained in the laboratory were used together with biomass measurements for T. recurvata in a xeric scrub to calculate the depth of water intercepted by rain. T. recurvata contributed 20 % to the rain interception capacity of their shrub hosts: Acacia farnesiana and Prosopis laevigata and; also potentially intercepted 4.8 % of the annual rainfall. Nocturnal stomatic opening in T. recurvata is not only relevant for CO2 but for water vapor, as suggested by the higher weight change of specimens wetted with fog for 1 h at dark in comparison to those wetted during daylight (543 ± 77 vs. 325 ± 56 mg, p = 0.048. The storage capacity of T. recurvata leaf surfaces could increase the amount of water available for evaporation, but as this species colonise montane forests, the effect could be negative on water recharge, because potential storage capacity is very high, in the laboratory experiments it took up to 12 h at a rate of 0.26 l h−1 to reach saturation conditions

IoT Stream Processing and Analytics in The Fog

OpenAIRE

Yang, Shusen

2017-01-01

The emerging Fog paradigm has been attracting increasing interests from both academia and industry, due to the low-latency, resilient, and cost-effective services it can provide. Many Fog applications such as video mining and event monitoring, rely on data stream processing and analytics, which are very popular in the Cloud, but have not been comprehensively investigated in the context of Fog architecture. In this article, we present the general models and architecture of Fog data streaming, ...

Fog as a fresh-water resource: overview and perspectives.

Science.gov (United States)

Klemm, Otto; Schemenauer, Robert S; Lummerich, Anne; Cereceda, Pilar; Marzol, Victoria; Corell, David; van Heerden, Johan; Reinhard, Dirk; Gherezghiher, Tseggai; Olivier, Jana; Osses, Pablo; Sarsour, Jamal; Frost, Ernst; Estrela, María J; Valiente, José A; Fessehaye, Gebregiorgis Mussie

2012-05-01

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m(-2) of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.

Literature Study on Community Participation in Community Based Rural Water Supply and Sanitation Programs

Science.gov (United States)

Nurbaiti, Siti Robiah; Bambang, Azis Nur

2018-02-01

Clean water and proper sanitation are basic human needs, existing procurement in the Law of the Republic of Indonesia Number 7 of 2004 on Water Resources and Government Regulation of the Republic of Indonesia Number 16 of 2005 on Development of Water Supply System, which the state guarantees the right of everyone water for basic daily minimum needs to meet the needs of a healthy, productive, and clean life. Norms every society has the right to get clean air to meet basic daily needs. One of the points in the goal of sustainable development goals (SDGs) in the environment sector is the guarantee of the community to achieve universal access to clean water and sanitation. The SDG High Level Panel held in 2012 calls on countries around the world to do so in 2030. Fulfillment of clean air and sanitation in Indonesia is conducted through two sectoral approaches, the first through agencies, or related agencies and the second through a Society. In accordance with its community-based principles, the role itself is a key factor in the success of the program. Therefore, the purpose of this paper is to find out the forms of community participation and the factors that influence participation in community-based water supply and sanitation programs in the field of literature studies of previous research such as research journals, theses, theses, dissertations and related books This literature study topic.

Literature Study on Community Participation in Community Based Rural Water Supply and Sanitation Programs

Directory of Open Access Journals (Sweden)

Robiah Nurbaiti Siti

2018-01-01

Full Text Available Clean water and proper sanitation are basic human needs, existing procurement in the Law of the Republic of Indonesia Number 7 of 2004 on Water Resources and Government Regulation of the Republic of Indonesia Number 16 of 2005 on Development of Water Supply System, which the state guarantees the right of everyone water for basic daily minimum needs to meet the needs of a healthy, productive, and clean life. Norms every society has the right to get clean air to meet basic daily needs. One of the points in the goal of sustainable development goals (SDGs in the environment sector is the guarantee of the community to achieve universal access to clean water and sanitation. The SDG High Level Panel held in 2012 calls on countries around the world to do so in 2030. Fulfillment of clean air and sanitation in Indonesia is conducted through two sectoral approaches, the first through agencies, or related agencies and the second through a Society. In accordance with its community-based principles, the role itself is a key factor in the success of the program. Therefore, the purpose of this paper is to find out the forms of community participation and the factors that influence participation in community-based water supply and sanitation programs in the field of literature studies of previous research such as research journals, theses, theses, dissertations and related books This literature study topic.

Coastal Fog Sustains Summer Baseflow in Northern Californian Watershed

Science.gov (United States)

Chung, M.; Dufour, A.; Leonardson, R.; Thompson, S. E.; Dawson, T. E.

2015-12-01

The Mediterranean climate of Northern California imposes significant water stress on ecosystems and water resources during the dry summer months. During summer, frequently the only water inputs occur as occult precipitation, in the form of fog and dew. In this study, we characterized the role of coastal fog, a dominant feature of Northern Californian coastal ecosystems and a widespread phenomenon associated with deep marine upwelling in west coast, arid, and Mediterranean climates worldwide. We monitored fog occurrence and intensity, throughfall following canopy interception of fog, soil moisture, streamflow, and meteorological variables, and made visual observations of the spatial extent of fog using time-lapse imagery in Upper Pilarcitos Creek Watershed (managed by San Francisco Public Utilities Commission as part of the San Francisco area water supply). We adopted a stratified sampling design that captured the watershed's elevation gradient, forest-edge versus interior locations, and different vegetation cover. The point-scale observations of throughfall inputs and transpiration suppression, estimated from the Penman equation, were upscaled using such watershed features and the observed fog "footprint" identified from the time-lapse images. When throughfall input and fog-induced transpiration suppression were incorporated into the operational watershed model, they improved estimates of summer baseflow, which remained persistently higher than could be explained without the fog effects. Fog, although providing relatively small volumetric inputs to the water balance, appears to offer significant relief of water stress throughout the terrestrial and aquatic components of the coastal Californian ecosystem and thus should be accounted for when assessing water stress availability in dry ecosystems.

Removal of micropollutants in source separated sanitation

NARCIS (Netherlands)

Butkovskyi, A.

2015-01-01

Source separated sanitation is an innovative sanitation method designed for minimizing use of energy and clean drinking water, and maximizing reuse of water, organics and nutrients from waste water. This approach is based on separate collection and treatment of toilet wastewater (black water) and

EFFECTS OF FOG PRECIPITATION ON WATER RESOURCES AND DRINKING WATER TREATMENT IN THE JIZERA MOUNTAINS, THE CZECH REPUBLIC

Directory of Open Access Journals (Sweden)

Josef Křeček

2015-07-01

Full Text Available Water yield from catchments with a high evidence of fog or low clouds could be increased by the canopy fog drip. However, in areas with the acid atmospheric deposition, this process can lead to the decline of water quality. The aim of this study is to analyze fog related processes in headwater catchments of the Jizera Mountains (the Czech Republic with special attention to water quality and the drinking water treatment. In two years (2011-2012, the fog drip was observed by twelve passive fog collectors at transect of the Jizerka experimental catchment. Methods of space interpolation and extrapolation (ArcGis 10.2 were applied to approximate the areal atmospheric deposition of fog water, sulphur and nitrogen, in catchments of the drinking water reservoirs Josefův Důl and Souš. The mean annual fog drip from vegetation canopy was found between 88 and 106 mm (i.e. 7 to 9 percent of precipitation, and 11 to 13 percent of water yield, estimated by standard rain gauge monitoring. But, the mean annual load of sulphur and nitrogen by the fog drip was 1,975 and 1,080, kilograms per square kilometre, respectively (i.e. 55 and 48 percent of total deposition of sulphur and nitrogen, registered in the bulk. The acidification of surface waters leads to rising operational costs in the water treatment plants (liming, reduce of heavy metals, more frequent control of sand filters etc.. In a catchment scale, the additional precipitation, caused by the canopy fog drip, could be controlled by the effective watershed management (support of forests stands near the native composition with presence of deciduous trees: beech, mountain ash, or birch.

Prediction of fog/visibility over India using NWP Model

Science.gov (United States)

Singh, Aditi; George, John P.; Iyengar, Gopal Raman

2018-03-01

Frequent occurrence of fog in different parts of northern India is common during the winter months of December and January. Low visibility conditions due to fog disrupt normal public life. Visibility conditions heavily affect both surface and air transport. A number of flights are either diverted or cancelled every year during the winter season due to low visibility conditions, experienced at different airports of north India. Thus, fog and visibility forecasts over plains of north India become very important during winter months. This study aims to understand the ability of a NWP model (NCMRWF, Unified Model, NCUM) with a diagnostic visibility scheme to forecast visibility over plains of north India. The present study verifies visibility forecasts obtained from NCUM against the INSAT-3D fog images and visibility observations from the METAR reports of different stations in the plains of north India. The study shows that the visibility forecast obtained from NCUM can provide reasonably good indication of the spatial extent of fog in advance of one day. The fog intensity is also predicted fairly well. The study also verifies the simple diagnostic model for fog which is driven by NWP model forecast of surface relative humidity and wind speed. The performance of NWP model forecast of visibility is found comparable to that from simple fog model driven by NWP forecast of relative humidity and wind speed.

Measurements of fog composition at a rural site

Science.gov (United States)

Straub, Derek J.; Hutchings, James W.; Herckes, Pierre

2012-02-01

Studies that focus on fog chemistry in the United States have been limited to relatively few locations. Apart from measurements along the East and West coasts and extensive analysis of radiation fog in the Central Valley of California, fog composition has been characterized in only a handful of other locations. To complement and expand the existing fog chemistry data that are currently available, a new field campaign was established at a rural location in Central Pennsylvania to produce a unique, long term record of fog composition. From 2007 to 2010, 41 fog events were sampled with an automated Caltech Heated Rod Cloudwater Collector (CHRCC). The collected samples were analyzed primarily for pH and major inorganic ions. Dissolved organic carbon (DOC) and trace metals were analyzed in selected samples and N-nitrosodimethylamine (NDMA) was quantified in two samples. Sample composition varied widely during the study period. Sulfate concentrations ranged from 15 to 955 (median = 123) μN and pH varied between 3.08 and 7.41 (median = 5.77). In terms of volume weighted averages, ammonium was the most abundant ionic species followed by sulfate, calcium, and nitrate. For the subset of samples in which DOC was analyzed, concentrations ranged from 2.2 to 22.6 mgC l -1. Comparisons with regional precipitation chemistry measurements reveal the influence of local agricultural and soil sources on fog composition. The sum of sulfate, nitrate, and ammonium measured in the present study is considerably lower than the majority of radiation, precipitation, and coastal fogs collected in the United States although the ammonium/(nitrate + sulfate) ratio is similar to those found in the Central Valley of California.

Fog Occurrence and Associated Meteorological Factors Over Kempegowda International Airport, India

Science.gov (United States)

Kutty, Saumya G.; Agnihotri, G.; Dimri, A. P.; Gultepe, I.

2018-05-01

The increase in fog frequency over the past few decades is a major cause of concern for the aviation and transportation sectors. Accurate forecasting of the spatio-temporal extent of fog is crucial for minimizing socioeconomic losses. The present study attempts to characterize the fog frequency and associated meteorological factors over Kempegowda International Airport, Bengaluru (KIAB), in Karnataka, India. Maximum fog occurrence is observed during the month of December, followed by January. The time of onset of fog lies usually between 1800 and 0300 UTC. No fog is formed between 0400 and 1700 UTC indicating the role of radiation fog. The predominant wind direction during fog events is east or southeasterly. There is significant positive correlation between the fog frequency and both the northeast monsoon, October-November (0.72), as well as December-January-February (DJF) rainfall (0.80). Soil moisture conditions during the DJF period also play a key role in fog occurrence and its climatology, which is evident from the correlation coefficient of order 0.68. These suggest that further research is needed for understanding the extent of impact on aviation at KIAB.

Fog at the Guarulhos International Airport from 1951 to 2015

Science.gov (United States)

França, Gutemberg Borges; do Carmo, Luiz Felipe Rodrigues; de Almeida, Manoel Valdonel; Albuquerque Neto, Francisco Leite

2018-02-01

This paper presents and discusses the fog occurrences before and after the construction of the Guarulhos International Airport, using data from 1951 to 2015. The analysis showed the following: (1) a total of 19,816 h of fog were registered. (2) The minimum average, mean and maximum average of the fog temperature had significantly increased after the airport was constructed from 1.2 to 6.9, 12.1 to 14.5 and 20.2 to 20.7 °C, respectively, due to the urban development around the airport during the study period. (3) The average fog hours per year decreased by approximately 73.1%, i.e., from 492 ± 84.45 to 132 ± 54.51 h per year. (4) Most of the fog events occurred due to longwave cooling on clear nights with relatively low wind speeds (characterizing radiation fog), with over 65% having duration of 2 h and occurring in the early hours of the day during March-September period. (5) The maximum probability of fog occurrence dropped about 10% from before to after the construction of the airport. Finally, two fog events are investigated using data collected during the fog evolution using atmospheric sounding profiles (from an acoustic sounder) and automatic meteorological stations and preliminary results showed that the values of cooling rate and turbulent kinetic energy play key roles in the onset and growth-dissipation phases of the fog, respectively.

False-positive ethyl glucuronide immunoassay screening caused by a propyl alcohol-based hand sanitizer.

Science.gov (United States)

Arndt, Torsten; Grüner, Joachim; Schröfel, Stefanie; Stemmerich, Karsten

2012-11-30

Urine ethyl glucuronide (EtG) is considered as a specific marker of recent ethanol consumption. We describe false-positive DRI(®) EIA EtG enzyme immunoassay results caused by propyl glucuronides in urine after using a propanol-based hand sanitizer. EtG screening was done with the DRI(®) EIA EtG assay (Microgenics), using a cut-off of 0.5 mg/L as recommended by the manufacturer and of 0.1 mg/L as demanded by the German Regulations for Reissuing Drivers Licenses. Confirmatory EtG analysis was done with the ClinMass(®) EtG LC-MS/MS testkit (Recipe), extended by the mass transitions 235.1→75.1, 235.1→85.1, and 235.1→113.1 for the detection of the 1- and 2-propyl glucuronides. Self-experiments were done by staff members of our lab (n=7), using 3 mL Sterillium(®) Classic Pure (30 g/100 g 1-propanol and 45 g/100 g 2-propanol) for hand sanitation every quarter of an hour for 8 h according to DIN EN 1500:2011-05 with and without an exhauster and by passive inhalation of the sanitizer vapor. Spot urine samples were taken immediately before and up to 24 h after the first sanitizer use. False-positive immunoassay results of up to 4 mg/L or 2.3 mg/g creatinine were obtained after normal use of the sanitizer and also after passive inhalation of the sanitizer vapor (up to 0.89 mg/L or 0.61 mg/g). Immunoassay results were positive even after 4-fold use of the sanitizer (up to 0.14 mg/L or 0.38 mg/g) and up to 6 h after the last sanitizer contact (maximum 0.63 mg/L and 0.33 mg/g for sanitizer users and 0.25 mg/g after passive inhalation). Spiking of EtG-free urine with 1-propyl glucuronide (Athena Environmental Sciences) between 0.05 and 10 mg/L clearly demonstrated a cross reaction of the immunoassay of approx. 10% as compared to EtG. LC-MS/MS of urines with a positive immunoassay EtG result did not show EtG signals, but distinct signals of 1-propyl glucuronide (n-propyl glucuronide) and 2-propyl glucuronide (iso-propyl glucuronide). An exhauster effectively prevented

The impact of fog on soil moisture dynamics in the Namib Desert

Science.gov (United States)

Li, Bonan; Wang, Lixin; Kaseke, Kudzai F.; Vogt, Roland; Li, Lin; Seely, Mary K.

2018-03-01

Soil moisture is a crucial component supporting vegetation dynamics in drylands. Despite increasing attention on fog in dryland ecosystems, the statistical characterization of fog distribution and how fog affects soil moisture dynamics have not been seen in literature. To this end, daily fog records over two years (Dec 1, 2014-Nov 1, 2016) from three sites within the Namib Desert were used to characterize fog distribution. Two sites were located within the Gobabeb Research and Training Center vicinity, the gravel plains and the sand dunes. The third site was located at the gravel plains, Kleinberg. A subset of the fog data during rainless period was used to investigate the effect of fog on soil moisture. A stochastic modeling framework was used to simulate the effect of fog on soil moisture dynamics. Our results showed that fog distribution can be characterized by a Poisson process with two parameters (arrival rate λ and average depth α (mm)). Fog and soil moisture observations from eighty (Aug 19, 2015-Nov 6, 2015) rainless days indicated a moderate positive relationship between soil moisture and fog in the Gobabeb gravel plains, a weaker relationship in the Gobabeb sand dunes while no relationship was observed at the Kleinberg site. The modeling results suggested that mean and major peaks of soil moisture dynamics can be captured by the fog modeling. Our field observations demonstrated the effects of fog on soil moisture dynamics during rainless periods at some locations, which has important implications on soil biogeochemical processes. The statistical characterization and modeling of fog distribution are of great value to predict fog distribution and investigate the effects of potential changes in fog distribution on soil moisture dynamics.

Environmental Sanitation Crisis: More than just a health issue

Directory of Open Access Journals (Sweden)

Peter A. Harvey

2008-01-01

Full Text Available The global environmental sanitation crisis cannot be denied: well over a century after the sanitary revolution in 19th century Europe, 40% of the world’s population still lacks access to improved sanitation. Important lessons from the past must be applied today if the crisis is to be averted. Sanitation has suffered from a lack of prioritization for as long as it has remained the poor relation to water supply. The International Year of Sanitation 2008 provides an opportunity to separate the two and give sanitation the emphasis it requires. The economic argument for sanitation must be articulated and non-health incentives for improved sanitation exploited. Environmental sanitation results in a multitude of socio-economic benefits and can contribute positively to all the Millennium Development Goals. Community-led bottom-up approaches, rather than supply-led or technology-driven approaches, are most effective in increasing and sustaining access to sanitation but need to be implemented at scale. Targeted strategies for urban and school sanitation are also required. Evidence-based advocacy can help develop the political will that is now needed to ensure sufficient public sector investment, leadership, legislation and regulation to ensure that the fundamental human right of access to sanitation is realized.

Physics of Fresh Produce Safety: Role of Diffusion and Tissue Reaction in Sanitization of Leafy Green Vegetables with Liquid and Gaseous Ozone-Based Sanitizers.

Science.gov (United States)

Shynkaryk, Mykola V; Pyatkovskyy, Taras; Mohamed, Hussein M; Yousef, Ahmed E; Sastry, Sudhir K

2015-12-01

Produce safety has received much recent attention, with the emphasis being largely on discovery of how microbes invade produce. However, the sanitization operation deserves more attention than it has received. The ability of a sanitizer to reach the site of pathogens is a fundamental prerequisite for efficacy. This work addresses the transport processes of ozone (gaseous and liquid) sanitizer for decontamination of leafy greens. The liquid sanitizer was ineffective against Escherichia coli K-12 in situations where air bubbles may be trapped within cavities. A model was developed for diffusion of sanitizer into the interior of produce. The reaction rate of ozone with the surface of a lettuce leaf was determined experimentally and was used in a numerical simulation to evaluate ozone concentrations within the produce and to determine the time required to reach different locations. For aqueous ozone, the penetration depth was limited to several millimeters by ozone self-decomposition due to the significant time required for diffusion. In contrast, gaseous sanitizer was able to reach a depth of 100 mm in several minutes without depletion in the absence of reaction with surfaces. However, when the ozone gas reacted with the produce surface, gas concentration was significantly affected. Simulation data were validated experimentally by measuring ozone concentrations at the bottom of a cylinder made of lettuce leaf. The microbiological test confirmed the relationship between ozone transport, its self-decomposition, reaction with surrounding materials, and the degree of inactivation of E. coli K-12. Our study shows that decontamination of fresh produce, through direct contact with the sanitizer, is more feasible with gaseous than with aqueous sanitizers. Therefore, sanitization during a high-speed washing process is effective only for decontaminating the wash water.

A heavy sea fog event over the Yellow Sea in March 2005: Analysis and numerical modeling

Science.gov (United States)

Gao, Shanhong; Lin, Hang; Shen, Biao; Fu, Gang

2007-02-01

In this paper, a heavy sea fog episode that occurred over the Yellow Sea on 9 March 2005 is investigated. The sea fog patch, with a spatial scale of several hundred kilometers at its mature stage, reduced visibility along the Shandong Peninsula coast to 100 m or much less at some sites. Satellite images, surface observations and soundings at islands and coasts, and analyses from the Japan Meteorology Agency (JMA) are used to describe and analyze this event. The analysis indicates that this sea fog can be categorized as advection cooling fog. The main features of this sea fog including fog area and its movement are reasonably reproduced by the Fifth-generation Pennsylvania State University/National Center for Atmospheric Research Mesoscale Model (MM5). Model results suggest that the formation and evolution of this event can be outlined as: (1) southerly warm/moist advection of low-level air resulted in a strong sea-surface-based inversion with a thickness of about 600 m; (2) when the inversion moved from the warmer East Sea to the colder Yellow Sea, a thermal internal boundary layer (TIBL) gradually formed at the base of the inversion while the sea fog grew in response to cooling and moistening by turbulence mixing; (3) the sea fog developed as the TIBL moved northward and (4) strong northerly cold and dry wind destroyed the TIBL and dissipated the sea fog. The principal findings of this study are that sea fog forms in response to relatively persistent southerly warm/moist wind and a cold sea surface, and that turbulence mixing by wind shear is the primary mechanism for the cooling and moistening the marine layer. In addition, the study of sensitivity experiments indicates that deterministic numerical modeling offers a promising approach to the prediction of sea fog over the Yellow Sea but it may be more efficient to consider ensemble numerical modeling because of the extreme sensitivity to model input.

Evaluation of Sanitizing Methods for Reducing Microbial Contamination on Fresh Strawberry, Cherry Tomato, and Red Bayberry

Directory of Open Access Journals (Sweden)

Wei Wei

2017-12-01

Full Text Available Strawberries, cherry tomatoes, and red bayberries, which are the most popular types of fresh produce in China, are vulnerable to microbial contamination. In this study, different sanitizing methods [treatment with 2% organic acids, 0.02% sodium hypochlorite (SH, 0.1% sodium chlorite (SC, and 0.1% acidified sodium chlorite (ASC] were applied to fresh strawberry, cherry tomato, and red bayberry, and their abilities to reduce aerobic bacteria, Escherichia coli O157:H7, mold, yeast, and Salmonella Typhimurium were evaluated. The commercially used SH method reduced the background microbiota on strawberry, cherry tomato, and red bayberry by 0.20–2.07 log cfu/g. The ASC method reduced background microbiota (except for mold on strawberry and cherry tomato by more than 3.0 log cfu/g. ASC was the only sanitizer that significantly reduced mold on red bayberry, and lactic acid was the only organic acid sanitizer that effectively reduced yeast on red bayberry. The ASC method had the best sterilizing effect on the three fresh fruits and also required the shortest sanitizing time and low chlorite content. The application of ASC method significantly reduced the microbiota on retail grocery samples, and the effect was similar to that achieved by sanitizing methods comparison.

Novel method for fog monitoring using cellular networks infrastructures

Science.gov (United States)

David, N.; Alpert, P.; Messer, H.

2012-08-01

A major detrimental effect of fog is visibility limitation which can result in serious transportation accidents, traffic delays and therefore economic damage. Existing monitoring techniques including satellites, transmissometers and human observers - suffer from low spatial resolution, high cost or lack of precision when measuring near ground level. Here we show a novel technique for fog monitoring using wireless communication systems. Communication networks widely deploy commercial microwave links across the terrain at ground level. Operating at frequencies of tens of GHz they are affected by fog and are, effectively, an existing, spatially world-wide distributed sensor network that can provide crucial information about fog concentration and visibility. Fog monitoring potential is demonstrated for a heavy fog event that took place in Israel. The correlation between transmissomters and human eye observations to the visibility estimates from the nearby microwave links was found to be 0.53 and 0.61, respectively. These values indicate the high potential of the proposed method.

Hydrologic Effects and Biogeographic Impacts of Coastal Fog, Channel Islands, California

Science.gov (United States)

Fischer, D. T.; Still, C. J.; Williams, A. P.

2006-12-01

Fog has long been recognized as an important component of the hydrological cycle in many ecosystems, including coastal desert fog belts, tropical cloud forests, and montane areas worldwide. Fog drip can be a major source of water, particularly during the dry season, and there is evidence in some ecosystems of direct fogwater uptake by foliar absorption. Fog and low clouds can also increase availability of water by reducing evaporative water losses. In the California Channel Islands, fog and low stratus clouds dramatically affect the water budget of coastal vegetation, particularly during the long summer drought. This work focuses on a population of Bishop pine (Pinus muricata D. Don) on Santa Cruz Island. This is the southernmost large stand of this species, and tree growth and survival appears to be strongly limited by water availability. We have used parallel measurement and modeling approaches to quantify the importance of fogwater inputs and persistent cloud cover to Bishop pine growth. We have modeled drought stress over the last century based on local climate records, calibrated against a dense network of 12 weather stations on a 7km coastal-inland elevation gradient. Water availability is highly variable year to year, with episodic droughts that are associated with widespread tree mortality. Frequent cloud cover near the coast reduces evapotranspiration relative to the inland site (on the order of 25%), thereby delaying the onset of, and moderating the severity of the annual summer drought. Substantial summer fog drip at higher elevations provides additional water inputs that also reduce drought severity. Beyond the theoretical availability of extra water from fog drip, tree ring analysis and xylem water isotopic data suggest that significant amounts of fog water are actually taken up by these trees. Stand boundaries appear to be driven by spatial patterns of mortality related to water availability and frequency of severe drought. These results suggest that

Occupational skin diseases and prevention among sanitation ...

African Journals Online (AJOL)

Background: Little research has been focused on the health status or the occupational protection awareness of sanitation workers. The policy recommendations on the occupational safety and health of sanitation workers based on the scientific research are also insufficient in developing countries like China. Objective: To ...

Channel modeling and performance evaluation of FSO communication systems in fog

KAUST Repository

Esmail, Maged Abdullah

2016-07-01

Free space optical (FSO) communication has become more exciting during the last decade. It has unregulated spectrum with a huge capacity compared to its radio frequency (RF) counterpart. Although FSO has many applications that cover indoor and outdoor environments, its widespread is humped by weather effects. Fog is classified as an extreme weather impairment that may cause link drop. Foggy channel modeling and characterization is necessary to analyze the system performance. In this paper, we first address the statistical behavior of the foggy channel based on a set of literature experimental data and develop a probability distribution function (PDF) model for fog attenuation. We then exploit our PDF model to derive closed form expressions and evaluate the system performance theoretically and numerically, in terms of average signal-to-noise ratio (SNR), and outage probability. The results show that for 10-3 outage probability and 22 dBm transmitted power, the FSO system can work over 80 m, 160 m, 310 m, and 460 m link length under dense, thick, moderate, and light fog respectively. Increasing the transmitted power will have high impact when the fog density is low. However, under very dense fog, it has almost no effect. © 2016 IEEE.

Channel modeling and performance evaluation of FSO communication systems in fog

KAUST Repository

Esmail, Maged Abdullah; Fathallah, Habib; Alouini, Mohamed-Slim

2016-01-01

Free space optical (FSO) communication has become more exciting during the last decade. It has unregulated spectrum with a huge capacity compared to its radio frequency (RF) counterpart. Although FSO has many applications that cover indoor and outdoor environments, its widespread is humped by weather effects. Fog is classified as an extreme weather impairment that may cause link drop. Foggy channel modeling and characterization is necessary to analyze the system performance. In this paper, we first address the statistical behavior of the foggy channel based on a set of literature experimental data and develop a probability distribution function (PDF) model for fog attenuation. We then exploit our PDF model to derive closed form expressions and evaluate the system performance theoretically and numerically, in terms of average signal-to-noise ratio (SNR), and outage probability. The results show that for 10-3 outage probability and 22 dBm transmitted power, the FSO system can work over 80 m, 160 m, 310 m, and 460 m link length under dense, thick, moderate, and light fog respectively. Increasing the transmitted power will have high impact when the fog density is low. However, under very dense fog, it has almost no effect. © 2016 IEEE.

Biofilm formation and sporulation by Bacillus cereus on a stainless steel surface and subsequent resistance of vegetative cells and spores to chlorine, chlorine dioxide, and a peroxyacetic acid-based sanitizer.

Science.gov (United States)

Ryu, Jee-Hoon; Beuchat, Larry R

2005-12-01

Biofilm formation by Bacillus cereus 038-2 on stainless steel coupons, sporulation in the biofilm as affected by nutrient availability, temperature, and relative humidity, and the resistance of vegetative cells and spores in biofilm to sanitizers were investigated. Total counts in biofilm formed on coupons immersed in tryptic soy broth (TSB) at 12 and 22 degrees C consisted of 99.94% of vegetative cells and 0.06% of spores. Coupons on which biofilm had formed were immersed in TSB or exposed to air with 100, 97, 93, or 85% relative humidity. Biofilm on coupons immersed in TSB at 12 degrees C for an additional 6 days or 22 degrees C for an additional 4 days contained 0.30 and 0.02% of spores, respectively, whereas biofilm exposed to air with 100 or 97% relative humidity at 22 degrees C for 4 days contained 10 and 2.5% of spores, respectively. Sporulation did not occur in biofilm exposed to 93 or 85% relative humidity at 22 degrees C. Treatment of biofilm on coupons that had been immersed in TSB at 22 degrees C with chlorine (50 microg/ml), chlorine dioxide (50 microg/ml), and a peroxyacetic acid-based sanitizer (Tsunami 200, 40 microg/ml) for 5 min reduced total cell counts (vegetative cells plus spores) by 4.7, 3.0, and 3.8 log CFU per coupon, respectively; total cell counts in biofilm exposed to air with 100% relative humidity were reduced by 1.5, 2.4, and 1.1 log CFU per coupon, respectively, reflecting the presence of lower numbers of vegetative cells. Spores that survived treatment with chlorine dioxide had reduced resistance to heat. It is concluded that exposure of biofilm formed by B. cereus exposed to air at high relative humidity (> or =97%) promotes the production of spores. Spores and, to a lesser extent, vegetative cells embedded in biofilm are protected against inactivation by sanitizers. Results provide new insights to developing strategies to achieve more effective sanitation programs to minimize risks associated with B. cereus in biofilm formed on

Hydrophobic/Hydrophilic Cooperative Janus System for Enhancement of Fog Collection.

Science.gov (United States)

Cao, Moyuan; Xiao, Jiasheng; Yu, Cunming; Li, Kan; Jiang, Lei

2015-09-09

Harvesting micro-droplets from fog is a promising method for solving global freshwater crisis. Different types of fog collectors have been extensively reported during the last decade. The improvement of fog collection can be attributed to the immediate transportation of harvested water, the effective regeneration of the fog gathering surface, etc. Through learning from the nature's strategy for water preservation, the hydrophobic/hydrophilic cooperative Janus system that achieved reinforced fog collection ability is reported here. Directional delivery of the surface water, decreased re-evaporation rate of the harvested water, and thinner boundary layer of the collecting surface contribute to the enhancement of collection efficiency. Further designed cylinder Janus collector can facilely achieve a continuous process of efficient collection, directional transportation, and spontaneous preservation of fog water. This Janus fog harvesting system should improve the understanding of micro-droplet collection system and offer ideas to solve water resource crisis. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Humidification - Fogging and other evaporative cooling in greenhouses

NARCIS (Netherlands)

Nederhoff, E.M.; Weel, van P.A.

2011-01-01

Fogging, misting, roof sprinklers, pad-and-fan and other techniques based on water evaporation are effective tools for improving the growing conditions in a greenhouse when humidity is low. They should be used wisely though.

An Architecture of IoT Service Delegation and Resource Allocation Based on Collaboration between Fog and Cloud Computing

Directory of Open Access Journals (Sweden)

Aymen Abdullah Alsaffar

2016-01-01

Full Text Available Despite the wide utilization of cloud computing (e.g., services, applications, and resources, some of the services, applications, and smart devices are not able to fully benefit from this attractive cloud computing paradigm due to the following issues: (1 smart devices might be lacking in their capacity (e.g., processing, memory, storage, battery, and resource allocation, (2 they might be lacking in their network resources, and (3 the high network latency to centralized server in cloud might not be efficient for delay-sensitive application, services, and resource allocations requests. Fog computing is promising paradigm that can extend cloud resources to edge of network, solving the abovementioned issue. As a result, in this work, we propose an architecture of IoT service delegation and resource allocation based on collaboration between fog and cloud computing. We provide new algorithm that is decision rules of linearized decision tree based on three conditions (services size, completion time, and VMs capacity for managing and delegating user request in order to balance workload. Moreover, we propose algorithm to allocate resources to meet service level agreement (SLA and quality of services (QoS as well as optimizing big data distribution in fog and cloud computing. Our simulation result shows that our proposed approach can efficiently balance workload, improve resource allocation efficiently, optimize big data distribution, and show better performance than other existing methods.

Evaluation of fog predictions and detection : [summary].

Science.gov (United States)

2015-03-01

Fog can make driving conditions extremely hazardous. These hazards are further increased : at night and/or when combined with smoke. Nationally, about 38,000 fog-related highway : incidents occur each year, with over 600 fatalities. Florida ranks thi...

Short communication: Reactivity of diacetyl with cleaning and sanitizing agents.

Science.gov (United States)

Rincon-Delgadillo, M I; Lopez-Hernandez, A; Rankin, S A

2013-01-01

Diacetyl is used to impart a buttery flavor to numerous food products such as sour cream, cottage cheese, vegetable oil-based spreads, baked goods, and beverages. Recent studies have linked exposure to high concentrations of diacetyl and the onset of bronchiolitis obliterans. Due to the reported risks that diacetyl may pose, many food companies have altered practices to reduce worker exposure to diacetyl, including the use of personal respirators, improved air handling systems, and adequate cleaning practices. Commonly used cleaning and sanitizing agents may be reactive with diacetyl; however, the efficacy of these chemicals has not been studied in detail and remains unclear. The objective of this work was to study the reaction chemistry of diacetyl with common industrial cleaning and sanitizing chemicals. The reactions were assessed at equimolar concentrations and analyzed by gas chromatography-mass spectrometry. Peroxyacetic acid was most reactive with diacetyl (95% reduction in diacetyl), followed by sodium hypochlorite (76% reduction), and hydrogen peroxide (26% reduction). Benzalkonium chloride (BAC) did not react with diacetyl. Acetic acid was detected as the main product of reactions of diacetyl with peroxyacetic acid, sodium hypochlorite, and hydrogen peroxide. 1,1-Dichloro-2-propanone and 1,1,1-trichloropropanone were also identified as volatile reaction products in the sodium hypochlorite reactions. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Project Fog Drops 5. Task 1: A numerical model of advection fog. Task 2: Recommendations for simplified individual zero-gravity cloud physics experiments

Science.gov (United States)

Rogers, C. W.; Eadie, W. J.; Katz, U.; Kocmond, W. C.

1975-01-01

A two-dimensional numerical model was used to investigate the formation of marine advection fog. The model predicts the evolution of potential temperature, horizontal wind, water vapor content, and liquid water content in a vertical cross section of the atmosphere as determined by vertical turbulent transfer and horizontal advection, as well as radiative cooling and drop sedimentation. The model is designed to simulate the formation, development, or dissipation of advection fog in response to transfer of heat and moisture between the atmosphere and the surface as driven by advection over horizontal discontinuities in the surface temperature. Results from numerical simulations of advection fog formation are discussed with reference to observations of marine fog. A survey of candidate fog or cloud microphysics experiments which might be performed in the low gravity environment of a shuttle-type spacecraft in presented. Recommendations are given for relatively simple experiments which are relevent to fog modification problems.

Sanitation investments in Ghana

DEFF Research Database (Denmark)

Awunyo-Akaba, Y.; Awunyo-Akaba, J.; Gyapong, M.

2016-01-01

with people’s willingness and ability to invest in household sanitation across all communities. The status of being a stranger i.e. migrant in the area left some populations without rights over the land they occupied and with low incentives to invest in sanitation, while indigenous communities were challenged......Background: Ghana’s low investment in household sanitation is evident from the low rates of improved sanitation. This study analysed how land ownership, tenancy security and livelihood patterns are related to sanitation investments in three adjacent rural and peri-urban communities in a district...... communities were triangulated with multiple interview material and contextual knowledge on social structures, history of settlement, land use, livelihoods, and access to and perceptions about sanitation. Results: This study shows that the history of settlement and land ownership issues are highly correlated...

Vertical profile of fog microphysics : a case study

Science.gov (United States)

Burnet, Frédéric; Brilouet, Pierre-Etienne; Mazoyer, Marie; Bourrianne, Thierry; Etcheberry, Jean-Michel; Gaillard, Brigitte; Legain, Dominique; Tzanos, Diane; Barrié, Joel; Barrau, Sébastien; Defoy, Stephan

2016-04-01

The occurrence and development of fogs result from the non-linear interaction of competing radiative, thermodynamic, microphysical and dynamical processes and the forecasting of their life cycle still remains a challenging issue. Several field campaigns have been carried out at the SIRTA observatory in the Paris suburb area (France). These experiments have shown that fog events exhibit large differences of the microphysical properties and various evolutions during their life cycle. To better understand relationships between the different processes and to validate numerical simulations it is necessary however to document the vertical profile of the fog microphysics. A CDP (Cloud Droplet Spectrometer) from DMT (Droplet Measurement Technology, Boulder, CO) has been modified to allow measurements of the droplet size distribution in fog layers with a tethered balloon. This instrumental set-up has been used during a field campaign during the winter 2013-214 in the Landes area in the South West of France. To validate the vertical profiles provided by the modified CDP, a mast was equipped with microphysical instruments at 2 altitude levels with an another CDP at 24 m and a Fog Monitor FM100 at 42 m. The instrumental set-up deployed during this campaign is presented. Data collected during a fog event that occurred during the night of 5-6 March 2014 are analysed. We show that microphysical properties such as droplet number concentration, LWC and mean droplet size, exhibit different time evolution during the fog life cycle depending on the altitude level. Droplet size distribution measurements are also investigated. They reveal sharp variations along the vertical close to the top of the fog layer. In addition it is shown that the shape of the size distributions at the top follows a time evolution typical of a quasi-adiabatic droplet growth.

Fog in the coastal region of southern Brazil: seasonal variations

Science.gov (United States)

Krusche, N.; Gomes, C.

2009-05-01

Fog forecasting, especially advection fog, is important because a large port is located at Rio Grande, 32° S and 52° W. Fogs discontinue the cargo transport and prevent entrance of ships in the port, causing great financial loss. Atmospheric and oceanographic conditions associated to fog formation are been investigated, especially those that happen during advection fog. The result of this characterization will facilitate the forecast using mesoscale numerical models. The research started with a climatology of fog in the region, in two locations which are 2° of latitude apart, with an average temperature difference of 3°C. The observation of fog is a standard record at conventional meteorological stations. Data from this study was obtained from the Meteorological Station of Rio Grande, which belongs to the Instituto Nacional de Meteorologia network, and from the Meteorological Station operated by the Division of Meteorology of Department of Airspace Control in Porto Alegre. The period of this study is from January 1990 to December 2005. The distribution of the monthly total of fog observations shows that they occur mainly between May and August, with maximum in June. In all seasons of the year the total number of fogs is greater than in Porto Alegre in Rio Grande. There was a decrease in the average annual number of fogs from the 90s to the last five years of research, which can be attributed to urbanization around the places of observation. It increases the temperature in the layers closer to the soil and decreases the available moisture, making the occurrence of radiation fog. Atmospheric and oceanographic conditions, prevalent during these occurrences, will be examined next. The another goal is to compare the data of advection fog in Rio Grande, obtained from images of the type ARGUS in Cassino beach, with those recorded by Meteorological Station. This work is partially financed by FINEP and CAPES.

Application of Fast Dynamic Allan Variance for the Characterization of FOGs-Based Measurement While Drilling.

Science.gov (United States)

Wang, Lu; Zhang, Chunxi; Gao, Shuang; Wang, Tao; Lin, Tie; Li, Xianmu

2016-12-07

The stability of a fiber optic gyroscope (FOG) in measurement while drilling (MWD) could vary with time because of changing temperature, high vibration, and sudden power failure. The dynamic Allan variance (DAVAR) is a sliding version of the Allan variance. It is a practical tool that could represent the non-stationary behavior of the gyroscope signal. Since the normal DAVAR takes too long to deal with long time series, a fast DAVAR algorithm has been developed to accelerate the computation speed. However, both the normal DAVAR algorithm and the fast algorithm become invalid for discontinuous time series. What is worse, the FOG-based MWD underground often keeps working for several days; the gyro data collected aboveground is not only very time-consuming, but also sometimes discontinuous in the timeline. In this article, on the basis of the fast algorithm for DAVAR, we make a further advance in the fast algorithm (improved fast DAVAR) to extend the fast DAVAR to discontinuous time series. The improved fast DAVAR and the normal DAVAR are used to responsively characterize two sets of simulation data. The simulation results show that when the length of the time series is short, the improved fast DAVAR saves 78.93% of calculation time. When the length of the time series is long ( 6 × 10 5 samples), the improved fast DAVAR reduces calculation time by 97.09%. Another set of simulation data with missing data is characterized by the improved fast DAVAR. Its simulation results prove that the improved fast DAVAR could successfully deal with discontinuous data. In the end, a vibration experiment with FOGs-based MWD has been implemented to validate the good performance of the improved fast DAVAR. The results of the experience testify that the improved fast DAVAR not only shortens computation time, but could also analyze discontinuous time series.

Application of Fast Dynamic Allan Variance for the Characterization of FOGs-Based Measurement While Drilling

Directory of Open Access Journals (Sweden)

Lu Wang

2016-12-01

Full Text Available The stability of a fiber optic gyroscope (FOG in measurement while drilling (MWD could vary with time because of changing temperature, high vibration, and sudden power failure. The dynamic Allan variance (DAVAR is a sliding version of the Allan variance. It is a practical tool that could represent the non-stationary behavior of the gyroscope signal. Since the normal DAVAR takes too long to deal with long time series, a fast DAVAR algorithm has been developed to accelerate the computation speed. However, both the normal DAVAR algorithm and the fast algorithm become invalid for discontinuous time series. What is worse, the FOG-based MWD underground often keeps working for several days; the gyro data collected aboveground is not only very time-consuming, but also sometimes discontinuous in the timeline. In this article, on the basis of the fast algorithm for DAVAR, we make a further advance in the fast algorithm (improved fast DAVAR to extend the fast DAVAR to discontinuous time series. The improved fast DAVAR and the normal DAVAR are used to responsively characterize two sets of simulation data. The simulation results show that when the length of the time series is short, the improved fast DAVAR saves 78.93% of calculation time. When the length of the time series is long ( 6 × 10 5 samples, the improved fast DAVAR reduces calculation time by 97.09%. Another set of simulation data with missing data is characterized by the improved fast DAVAR. Its simulation results prove that the improved fast DAVAR could successfully deal with discontinuous data. In the end, a vibration experiment with FOGs-based MWD has been implemented to validate the good performance of the improved fast DAVAR. The results of the experience testify that the improved fast DAVAR not only shortens computation time, but could also analyze discontinuous time series.

Impact of fog processing on water soluble organic aerosols.

Science.gov (United States)

Tripathi, S. N.; Chakraborty, A.; Gupta, T.

2017-12-01

Fog is a natural meteorological phenomenon that occurs all around the world, and contains a substantial quantity of liquid water. Fog is generally seen as a natural cleansing agent but can also form secondary organic aerosols (SOA) via aqueous processing of ambient organics. Few field studies have reported elevated O/C ratio and SOA mass during or after fog events. However, mechanism behind aqueous SOA formation and its contribution to total organic aerosols (OA) still remains unclear. In this study we have tried to explore the impact of fog/aqueous processing on the characteristics of water soluble organic aerosols (WSOC), which to our knowledge has not been studied before. To assess this, both online (using HR-ToF-AMS) and offline (using a medium volume PM2.5 sampler and quartz filter) aerosol sampling were carried out at Kanpur, India from 15 December 2014 - 10 February 2015. Further, offline analysis of the aqueous extracts of the collected filters were carried out by AMS to characterize the water soluble OA (WSOA). Several (17) fog events occurred during the campaign and high concentrations of OA (151 ± 68 µg/m3) and WSOA (47 ± 19 µg/m3) were observed. WSOA/OA ratios were similar during fog (0.36 ± 0.14) and nofog (0.34 ± 0.15) periods. WSOA concentrations were also similar (slightly higher) during foggy (49 ± 18 µg/m3) and non-foggy periods (46 ± 20 µg/m3), in spite of fog scavenging. However, WSOA was more oxidized during foggy period (average O/C = 0.81) than non foggy periods (average O/C = 0.70). Like WSOA, OA was also more oxidized during foggy periods (average O/C = 0.64) than non foggy periods (average O/C = 0.53). During fog, WSOA to WIOA (water insoluble OA) ratios were higher (0.65 ± 0.16) compared to non foggy periods (0.56 ± 0.15). These observations clearly showed that WSOA become more dominant and processed during fog events, possibly due to the presence of fog droplets. This study highlights that fog processing of soluble organics

Fog collecting biomimetic surfaces: Influence of microstructure and wettability.

Science.gov (United States)

Azad, M A K; Ellerbrok, D; Barthlott, W; Koch, K

2015-01-19

We analyzed the fog collection efficiency of three different sets of samples: replica (with and without microstructures), copper wire (smooth and microgrooved) and polyolefin mesh (hydrophilic, superhydrophilic and hydrophobic). The collection efficiency of the samples was compared in each set separately to investigate the influence of microstructures and/or the wettability of the surfaces on fog collection. Based on the controlled experimental conditions chosen here large differences in the efficiency were found. We found that microstructured plant replica samples collected 2-3 times higher amounts of water than that of unstructured (smooth) samples. Copper wire samples showed similar results. Moreover, microgrooved wires had a faster dripping of water droplets than that of smooth wires. The superhydrophilic mesh tested here was proved more efficient than any other mesh samples with different wettability. The amount of collected fog by superhydrophilic mesh was about 5 times higher than that of hydrophilic (untreated) mesh and was about 2 times higher than that of hydrophobic mesh.

Influence of different sanitizers on food contaminant bacteria: effect of exposure temperature, contact time, and product concentration

Directory of Open Access Journals (Sweden)

Cezar Augusto Beltrame

2012-06-01

Full Text Available The efficiency of four Sanitizers - peracetic acid, chlorhexidine, quaternary ammonium, and organic acids - was tested in this work using different bacteria recognized as a problem to meat industry, Salmonella sp., S. aureus, E. coli and L. monocytogenes. The effects of sanitizer concentration (0.2, 0.5, 0.6, 1.0, 1.1 and 1.4%, at different temperatures (10 and 45 °C and contact time (2, 10, 15, 18 and 25 minutes were evaluated. Tests in an industrial plant were also carried out considering previously obtained results. In a general way, peracetic acid presented higher efficiencies using low concentration (0.2% and contact time (2 minutes at 10 °C. The tests performed in industrial scale showed that peracetic acid presented a good performance in concentration and contact time lower than that suggested by the suppliers. The use of chlorhexidine and quaternary ammonium led to reasonable results at the indicated conditions, and organic acids were ineffective under concentration and contact time higher than those indicated by the suppliers in relation to Staphylococcus aureus. The results, in general, show that the choice for the most adequate sanitizer depends on the microorganism contaminant, the time available for sanitizer application, and also on the process cost.

Prediction of Fog/Visibility over India using NWP Model

Indian Academy of Sciences (India)

54

fog which is driven by NWP model forecast of surface relative humidity and wind speed. The performance of NWP model forecast of visibility is found comparable to that from simple fog model driven by NWP forecast of relative humidity and wind speed. Keywords: Visibility, Fog, Insat-3D, METARS, NCUM, North India.

Dropwise chains as the elements of water fog spatial structure

International Nuclear Information System (INIS)

Shavlov, A.V.; Sokolov, I.V.; Romanyuk, S.N.; Dzhumandzhi, V.A.

2013-01-01

Video images of water fog drops were acquired under standard atmospheric conditions with weak turbulence of the environment. Pair correlation functions of the drops were performed and traces of the spatial arrangement of the drops inside the fog determined. The fog structure carriers are the drop chains with a fixed interdroplet distance. The possible influence of the drop chains on the shear viscosity and fog surface tension has been analysed.

Light scattering from superfluid fog

International Nuclear Information System (INIS)

Kim, Heetae; Lemieux, P.-A.Pierre-Anthony; Durian, Douglas; Williams, G.A.Gary A.

2003-01-01

The dynamics of the droplets of superfluid 4 He fog created by an ultrasonic transducer are investigated using a laser scattering technique. Diffusing-wave spectroscopy probes the motion of the droplets, which is found to be ballistic for times shorter than a characteristic viscous time τ v =10 -5 s. The average relative velocity between the droplets is small compared to the velocity that the droplets are ejected from the surface into the fog, but increases proportionally to it

Pollution Levels in Fog at the Chilean Coast

Science.gov (United States)

Sträter, E.; Klemm, O.; Westbeld, A.

2010-07-01

During July and August 2008 fog water was collected for chemical analysis in Patache, at the coast of northern Chile, 60 km south of Iquique (20°49’S, 70°09’W). Advective fog events occur regularly at the cliff in the coastal range at about 800 m above MSL. People collect these types of fog water at some places along the coast with Large Fog Collectors (LFC) for domestic use and for watering field crops. So far, no chemical analysis of fog water was performed in Patache. Pure fogwater samples (38 samples from 8 fog events) were taken by using a passive Scientific Cylindrical Fog Collector. Major ions and trace metals were quantified. The analyses indicate very high ionic concentrations (mean 3500 µeq/l) and very low pH values (mean 3.3). The mean H+-concentration represents 16 % of the total ionic equivalent concentration. Sulfate is the anion exhibiting the highest concentrations. A mean value of 880 µeq/l was found, which accounts for 24 % of the total mean concentration. In contrast to sulfate, nitrate shows only a low percentage of 8.1 %. Further major ions are sodium (20%) and chloride (19 %), which are typical seasalt ions in coastal fog. High correlations between the measured ions suggest a causal link between concentration in the fog samples and the liquid water content (LWC) of the cloud. The higher the liquid water content the lower are the ionic concentrations. Enrichment factors with sodium as reference ion were calculated to identify potential emission sources contributing to the observed pollutant levels. We found that K+, Na+, Mg2+ and Cl- mainly result from seaspray. Sulfate, however, is enriched by a factor of 13. The measured trace elements are highly enriched by factors up to hundreds of thousands (Zn: 50, Ni: 1800, As: 2400, Cd: 3900, Fe: 100000, Cu: 96000, Pb: 250000). A cluster analysis supports the conclusion that sulfate and the trace elements originate from anthropogenic activities. The sulfate cannot primarily originate from

Evaluation of trace elements contamination in cloud/fog water at an elevated mountain site in Northern China.

Science.gov (United States)

Liu, Xiao-huan; Wai, Ka-ming; Wang, Yan; Zhou, Jie; Li, Peng-hui; Guo, Jia; Xu, Peng-ju; Wang, Wen-xing

2012-07-01

Totally 117 cloud/fog water samples were collected at the summit of Mt. Tai (1534m a.s.l.)-the highest mountain in the Northern China Plain. The results were investigated by a combination of techniques including back trajectory model, regional air quality and dust storm models, satellite observations and Principal Component Analysis. Elemental concentrations were determined by Inductively Coupled Plasma Mass Spectrometry, with stringent quality control measures. Higher elemental concentrations were found at Mt. Tai compared with those reported by other overseas studies. The larger proportions and higher concentrations of toxic elements such as Pb and As in cloud/fog water compared with those in rainwater at Mt. Tai suggests higher potential hazards of cloud/fog water as a source of contamination in polluted areas to the ecosystem. Peak concentrations of trace elements were frequently observed during the onset of cloud/fog events when liquid water contents of cloud/fog water were usually low and large amount of pollutants were accumulated in the ambient air. Inverse relationship between elemental concentrations and liquid water contents were only found in the samples with high electrical conductivities and liquid water contents lower than 0.3gm(-3). Affected mainly by the emissions of steel industries and mining activities, air masses transported from south/southwest of Mt. Tai were frequently associated with higher elemental concentrations. The element Mn is attributed to play an important role in the acidity of cloud/fog water. The composition of cloud/fog water influenced by an Asian dust storm event was reported, which was seldom found in the literature. Copyright © 2012 Elsevier Ltd. All rights reserved.

A field study of pollutant deposition in radiation fog

Energy Technology Data Exchange (ETDEWEB)

Waldman, J.M.; Jacob, D.J.; Munger, J.W.; Hoffman, M.R.

1986-04-01

Deposition during fog episodes can make a significant contribution to the overall flux of pollutants in certain ecosystems. Furthermore, when atmospheric stagnation prevents normal ventilation in a region, fog deposition may become the main route of pollutant removal. Fogs can consequently exert dominant control over pollutant levels in certain atmospheres. The southern San Joaquin Valley (SJV) of California is a region prone to wintertime episodes of atmospheric stagnation. These lead to elevated pollutant concentrations and/or dense, widespread fogs. Major oil-recovery operations plus widespread agricultural and livestock feeding activities are important sources of SO/sub 2/, NO/sub X/ and NH/sub 3/ in the valley. A multifaceted program of field monitoring was conducted in the SJV during the winter 1984-1985, focusing on aspects of pollutant scavenging and removal in the fog-laden atmosphere. Concentrations of major species were measured in gas, dry aerosol and fogwater phases. In addition, depositional fluxes were monitored by surrogate-surface methods. These measurements were employed to directly assess the magnitude of removal enhancement by fog.

A Secure and Verifiable Outsourced Access Control Scheme in Fog-Cloud Computing.

Science.gov (United States)

Fan, Kai; Wang, Junxiong; Wang, Xin; Li, Hui; Yang, Yintang

2017-07-24

With the rapid development of big data and Internet of things (IOT), the number of networking devices and data volume are increasing dramatically. Fog computing, which extends cloud computing to the edge of the network can effectively solve the bottleneck problems of data transmission and data storage. However, security and privacy challenges are also arising in the fog-cloud computing environment. Ciphertext-policy attribute-based encryption (CP-ABE) can be adopted to realize data access control in fog-cloud computing systems. In this paper, we propose a verifiable outsourced multi-authority access control scheme, named VO-MAACS. In our construction, most encryption and decryption computations are outsourced to fog devices and the computation results can be verified by using our verification method. Meanwhile, to address the revocation issue, we design an efficient user and attribute revocation method for it. Finally, analysis and simulation results show that our scheme is both secure and highly efficient.

A Secure and Verifiable Outsourced Access Control Scheme in Fog-Cloud Computing

Science.gov (United States)

Fan, Kai; Wang, Junxiong; Wang, Xin; Li, Hui; Yang, Yintang

2017-01-01

With the rapid development of big data and Internet of things (IOT), the number of networking devices and data volume are increasing dramatically. Fog computing, which extends cloud computing to the edge of the network can effectively solve the bottleneck problems of data transmission and data storage. However, security and privacy challenges are also arising in the fog-cloud computing environment. Ciphertext-policy attribute-based encryption (CP-ABE) can be adopted to realize data access control in fog-cloud computing systems. In this paper, we propose a verifiable outsourced multi-authority access control scheme, named VO-MAACS. In our construction, most encryption and decryption computations are outsourced to fog devices and the computation results can be verified by using our verification method. Meanwhile, to address the revocation issue, we design an efficient user and attribute revocation method for it. Finally, analysis and simulation results show that our scheme is both secure and highly efficient. PMID:28737733

Fog detection for interstate and state highways.

Science.gov (United States)

2012-12-01

Fog is a common and recurrent phenomenon in West Virginia which is the cause of nearly 1.3% of all fatal crashes : occurring all over the state. All three types of fog are common in the state which results in lack visibility, limited : contrast, dist...

Influence of fat and oil type on the yield, physico-chemical properties, and microstructure of fat, oil, and grease (FOG) deposits.

Science.gov (United States)

Del Mundo, Dann Marie N; Sutheerawattananonda, Manote

2017-11-01

Fat, oil, and grease (FOG) deposit, in the form of calcium soap, was found to cause sanitary sewer overflows due to its adhesion on pipe walls. To address this problem, laboratory-prepared calcium soaps have been used to investigate the formation mechanisms of FOG deposits. However, the fats and oils previously utilized were limited and some soap characteristics were not examined. This research attempted to probe through the properties of calcium soaps prepared from calcium chloride and the fats and oils of chicken, pork, palm olein, soybean, olive, and coconut to further understand FOG formation and stability. Results revealed that FOG deposits may occur as smooth, paste-like material or coarse, semi-solid substance depending on their exposure to excess fat/oil and calcium. The smooth soaps with more excess fat/oil demonstrated high apparent viscosity and consistency index, while the coarse soaps with large levels of calcium signified higher melting endset. Moreover, a soap microstructure showing evident networks and lesser void area displayed higher heat and rheological stability, respectively. Overall, fats and oils with higher oleic to palmitic acid ratio such as palm olein oil, olive oil, chicken fat, and pork fat produced soaps with greater yield and degree of saponification. Hence, establishments and authorities should be alert in managing and monitoring these wastes. On the other hand, soybean oil high in linoleic acid and coconut oil high in lauric acid do not pose an immediate threat to the sewer system since they only produced soaps in small quantity. However, their soaps showed high melting endset which could pose a serious effect when accumulated at large amount. On the whole, the fatty acid profile of fats and oils, the presence of excess fat/oil, and calcium content mainly dictate the appearance, melting, rheology, and microstructure of calcium soaps. Their distinct properties can be used as criteria in predicting the condition and stability of FOG

CT fogging effect with ischemic cerebral infarcts

International Nuclear Information System (INIS)

Becker, H.; Desch, H.; Hacker, H.; Pencz, A.; Frankfurt Univ.

1979-01-01

Systematic CT studies on ten patients with persistent ischemic cerebral infarct revealed a constant phenomenon, the fogging effect. The hypodense infarct at the beginning will be isodense, or close to isodense, on the plain CT during the second or third week and at a later stage will be hypodense again. The fogging infarcted area shows homogeneous intensive contrast enhancement. Knowledge of the fogging effect is important for correct interpretation of the CT image and the indication for contrast medium CT. CT without contrast medium may lead to misinterpretation during the second and third week after the onset of cerebral infarction. (orig.) [de

CT fogging effect with ischemic cerebral infarcts

Energy Technology Data Exchange (ETDEWEB)

Becker, H; Desch, H; Hacker, H; Pencz, A [Frankfurt Univ. (Germany, F.R.). Abt. fuer Neurologie; Frankfurt Univ. (Germany, F.R.). Abt. fuer Neuroradiologie)

1979-01-01

Systematic CT studies on ten patients with persistent ischemic cerebral infarct revealed a constant phenomenon, the fogging effect. The hypodense infarct at the beginning will be isodense, or close to isodense, on the plain CT during the second or third week and at a later stage will be hypodense again. The fogging infarcted area shows homogeneous intensive contrast enhancement. Knowledge of the fogging effect is important for correct interpretation of the CT image and the indication for contrast medium CT. CT without contrast medium may lead to misinterpretation during the second and third week after the onset of cerebral infarction.

Fog-basking behaviour and water collection efficiency in Namib Desert Darkling beetles.

Science.gov (United States)

Nørgaard, Thomas; Dacke, Marie

2010-07-16

In the Namib Desert fog represents an alternative water source. This is utilised by Darkling beetles (Tenebrionidae) that employ different strategies for obtaining the fog water. Some dig trenches in the sand, while others use their own bodies as fog collectors assuming a characteristic fog-basking stance. Two beetle species from the genus Onymacris have been observed to fog-bask on the ridges of the sand dunes. These beetles all have smooth elytra surfaces, while another species with elytra covered in bumps is reported to have specialised adaptations facilitating water capture by fog-basking. To resolve if these other beetles also fog-bask, and if an elytra covered in bumps is a more efficient fog water collector than a smooth one, we examined four Namib Desert beetles; the smooth Onymacris unguicularis and O. laeviceps and the bumpy Stenocara gracilipes and Physasterna cribripes. Here we describe the beetles' fog-basking behaviour, the details of their elytra structures, and determine how efficient their dorsal surface areas are at harvesting water from fog. The beetles differ greatly in size. The largest P. cribripes has a dorsal surface area that is 1.39, 1.56, and 2.52 times larger than O. unguicularis, O. laeviceps, and S. gracilipes, respectively. In accordance with earlier reports, we found that the second largest O. unguicularis is the only one of the four beetles that assumes the head standing fog-basking behaviour, and that fog is necessary to trigger this behaviour. No differences were seen in the absolute amounts of fog water collected on the dorsal surface areas of the different beetles. However, data corrected according to the sizes of the beetles revealed differences. The better fog water harvesters were S. gracilipes and O. unguicularis while the large P. cribripes was the poorest. Examination of the elytra microstructures showed clear structural differences, but the elytra of all beetles were found to be completely hydrophobic. The differences in

Fog-basking behaviour and water collection efficiency in Namib Desert Darkling beetles

Directory of Open Access Journals (Sweden)

Dacke Marie

2010-07-01

Full Text Available Abstract Background In the Namib Desert fog represents an alternative water source. This is utilised by Darkling beetles (Tenebrionidae that employ different strategies for obtaining the fog water. Some dig trenches in the sand, while others use their own bodies as fog collectors assuming a characteristic fog-basking stance. Two beetle species from the genus Onymacris have been observed to fog-bask on the ridges of the sand dunes. These beetles all have smooth elytra surfaces, while another species with elytra covered in bumps is reported to have specialised adaptations facilitating water capture by fog-basking. To resolve if these other beetles also fog-bask, and if an elytra covered in bumps is a more efficient fog water collector than a smooth one, we examined four Namib Desert beetles; the smooth Onymacris unguicularis and O. laeviceps and the bumpy Stenocara gracilipes and Physasterna cribripes. Here we describe the beetles' fog-basking behaviour, the details of their elytra structures, and determine how efficient their dorsal surface areas are at harvesting water from fog. Results The beetles differ greatly in size. The largest P. cribripes has a dorsal surface area that is 1.39, 1.56, and 2.52 times larger than O. unguicularis, O. laeviceps, and S. gracilipes, respectively. In accordance with earlier reports, we found that the second largest O. unguicularis is the only one of the four beetles that assumes the head standing fog-basking behaviour, and that fog is necessary to trigger this behaviour. No differences were seen in the absolute amounts of fog water collected on the dorsal surface areas of the different beetles. However, data corrected according to the sizes of the beetles revealed differences. The better fog water harvesters were S. gracilipes and O. unguicularis while the large P. cribripes was the poorest. Examination of the elytra microstructures showed clear structural differences, but the elytra of all beetles were found to

Light scattering from superfluid fog

Energy Technology Data Exchange (ETDEWEB)

Kim, Heetae; Lemieux, P.-A.Pierre-Anthony; Durian, Douglas; Williams, G.A.Gary A

2003-05-01

The dynamics of the droplets of superfluid {sup 4}He fog created by an ultrasonic transducer are investigated using a laser scattering technique. Diffusing-wave spectroscopy probes the motion of the droplets, which is found to be ballistic for times shorter than a characteristic viscous time {tau}{sub v}=10{sup -5} s. The average relative velocity between the droplets is small compared to the velocity that the droplets are ejected from the surface into the fog, but increases proportionally to it.

Diurnal temperature asymmetries and fog at Churchill, Manitoba

Science.gov (United States)

Gough, William A.; He, Dianze

2015-07-01

A variety of methods are available to calculate daily mean temperature. We explore how the difference between two commonly used methods provides insight into the local climate of Churchill, Manitoba. In particular, we found that these differences related closely to seasonal fog. A strong statistically significant correlation was found between the fog frequency (hours per day) and the diurnal temperature asymmetries of the surface temperature using the difference between the min/max and 24-h methods of daily temperature calculation. The relationship was particularly strong for winter, spring and summer. Autumn appears to experience the joint effect of fog formation and the radiative effect of snow cover. The results of this study suggests that subtle variations of diurnality of temperature, as measured in the difference of the two mean temperature methods of calculation, may be used as a proxy for fog detection in the Hudson Bay region. These results also provide a cautionary note for the spatial analysis of mean temperatures using data derived from the two different methods particularly in areas that are fog prone.

An analysis, sensitivity and prediction of winter fog events using FASP model over Indo-Gangetic plains, India

Science.gov (United States)

Srivastava, S. K., Sr.; Sharma, D. A.; Sachdeva, K.

2017-12-01

Indo-Gangetic plains of India experience severe fog conditions during the peak winter months of December and January every year. In this paper an attempt has been to analyze the spatial and temporal variability of winter fog over Indo-Gangetic plains. Further, an attempt has also been made to configure an efficient meso-scale numerical weather prediction model using different parameterization schemes and develop a forecasting tool for prediction of fog during winter months over Indo-Gangetic plains. The study revealed that an alarming increasing positive trend of fog frequency prevails over many locations of IGP. Hot spot and cluster analysis were conducted to identify the high fog prone zones using GIS and inferential statistical tools respectively. Hot spots on an average experiences fog on 68.27% days, it is followed by moderate and cold spots with 48.03% and 21.79% respectively. The study proposes a new FASP (Fog Analysis, sensitivity and prediction) Model for overall analysis and prediction of fog at a particular location and period over IGP. In the first phase of this model long term climatological fog data of a location is analyzed to determine its characteristics and prevailing trend using various advanced statistical techniques. During a second phase a sensitivity test is conducted with different combination of parameterization schemes to determine the most suitable combination for fog simulation over a particular location and period and in the third and final phase, first ARIMA model is used to predict the number of fog days in future . Thereafter, Numerical model is used to predict the various meteorological parameters favourable for fog forecast. Finally, Hybrid model is used for fog forecast over the study location. The results of the FASP model are validated with actual ground based fog data using statistical tools. Forecast Fog-gram generated using hybrid model during Jan 2017 shows highly encouraging results for fog occurrence/Non occurrence between

Alternative Agents to Prevent Fogging in Head and Neck Endoscopy

Directory of Open Access Journals (Sweden)

Patorn Piromchai

2011-01-01

Full Text Available Background The essential factor for diagnosis and treatment of diseases in head and neck endoscopy is the visibility of the image. An anti-fogging agent can reduce this problem by minimizing surface tension to prevent the condensation of water in the form of small droplets on a surface. There is no report on the use of hibiscrub ® or baby shampoo to reduce fogging in the literature. The objective of this study was to compare the efficacy between commercial anti-fogging agent, hibiscrub ® and baby shampoo to reduce fogging for the use in head and neck endoscopy. Methods The study was conducted at the Department of Otorhinolaryngology, Faculty of Medicine, Khon Kaen University in August 2010. Commercial anti-fogging agent, baby shampoo and hibiscrub ® were applied on rigid endoscope lens before putting them into a mist generator. The images were taken at baseline, 15 seconds, 30 seconds and 1 minute. The images' identifiers were removed before they were sent to two evaluators. A visual analogue scale (VAS was used to rate the image quality from 0 to 10. Results The difference in mean VAS score between anti-fogging agent, baby shampoo and hibiscrub ® versus no agent were 5.46, 4.45 and 2.1 respectively. The commercial anti-fogging agent and baby shampoo had most protective benefit and performed significantly better than no agent ( P < 0.05. Conclusions Baby shampoo is an effective agent to prevent fogging during head and neck endoscopy and compares favourably with commercial anti-fogging agent.

Pesticide occurrence and distribution in fog collected near Monterey, California

Energy Technology Data Exchange (ETDEWEB)

Schomburg, C.J.; Glotfelty, D.E. (Department of Agriculture, Beltsville, MD (USA)); Seiber, J.N. (Univ. of California, Davis (USA))

1991-01-01

The authors analyzed pesticides in air and fog in several fog events sampled near Monterey, CA, to determine whether the uptake of pesticides in advected oceanic fog was different from uptake in fog forming under stagnant inversion conditions in California's Central Valley in the winter. Data for several pesticides common to both ares showed that the pesticide content and distribution were remarkable similar in the two locations. The conversion of organophosphorus insecticides to their corresponding oxons, and aqueous-phase enrichment factors, were also very similar. Evidence is presented to support the hypothesis that enhanced pesticide concentration in fogwater is caused by strongly sorptive nonfilterable particles and colloids in the fog liquid that are derived from atmospheric particles.

Numerical simulation of radiation fog in complex terrain

Science.gov (United States)

Zhang, X.; Musson-Genon, L.; Carissimo, B.; Dupont, E.

2009-09-01

The interest for micro-scale modeling of the atmosphere is growing for environmental applications related, for example, to energy production, transport and urban development. The turbulence in the stable layers where pollutant dispersion is low and can lead to strong pollution events. This could be further complicated by the presence of clouds or fog and is specifically difficult in urban or industrial area due to the presence of buildings. In this context, radiation fog formation and dissipation over complex terrain were therefore investigated with a state-of-the-art model. This study is divided into two phases. The first phase is a pilot stage, which consist of employing a database from the ParisFog campaign which took place in the south of Paris during winter 2006-07 to assess the ability of the cloud model to reproduce the detailed structure of radiation fog. The second phase use the validated model for the study of influence of complex terrain on fog evolution. Special attention is given to the detailed and complete simulations and validation technique used is to compare the simulated results using the 3D cloud model of computational fluid dynamical software Code_Saturne with one of the best collected in situ data during the ParisFog campaign. Several dynamical, microphysical parameterizations and simulation conditions have been described. The resulting 3D cloud model runs at a horizontal resolution of 30 m and a vertical resolution comparable to the 1D model. First results look very promising and are able to reproduce the spatial distribution of fog. The analysis of the behavior of the different parameterized physical processes suggests that the subtle balance between the various processes is achieved.

Fog deposition to a Tillandsia carpet in the Atacama Desert

Science.gov (United States)

Westbeld, A.; Klemm, O.; Grießbaum, F.; Sträter, E.; Larrain, H.; Osses, P.; Cereceda, P.

2009-09-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m-2 of water were made available through deposition. Whole-year deposition was estimated as 25 L m-2. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i) deposition of water to the desert, and (ii) intensification of advection fog through additional formation of radiation fog.

Fog deposition to a Tillandsia carpet in the Atacama Desert

Energy Technology Data Exchange (ETDEWEB)

Westbeld, A.; Klemm, O.; Griessbaum, F.; Straeter, E. [Muenster Univ. (Germany). Inst. of Landscape Ecology; Larrain, H. [Pontificia Univ. Catolica de Chile (Chile). Atacama Desert Center ADC; Univ. Bolivariana, Iquique (Chile); Osses, P.; Cereceda, P. [Pontificia Univ. Catolica de Chile, Santiago de Chile (Chile). Inst. of Geography

2009-07-01

In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m{sup -2} of water were made available through deposition. Whole-year deposition was estimated as 25 L m{sup -2}. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i) deposition of water to the desert, and (ii) intensification of advection fog through additional formation of radiation fog. (orig.)

Fog deposition to a Tillandsia carpet in the Atacama Desert

Directory of Open Access Journals (Sweden)

P. Osses

2009-09-01

Full Text Available In the Atacama Desert, one of the driest places on earth, fog deposition plays an important role for the water balance and for the survival of vulnerable ecosystems. The eddy covariance method, previously applied for the quantification of fog deposition to forests in various parts of the world, was used for the first time to measure deposition of fog water to a desert. In this exploratory study we estimate the amount of water available for the ecosystem by deposition and determine the relevant processes driving fog deposition. This is especially important for the species Tillandsia landbecki living in coastal Atacama at the limit of plant existence with fog and dew being the only sources of water. Between 31 July and 19 August 2008 approximately 2.5 L m−2 of water were made available through deposition. Whole-year deposition was estimated as 25 L m−2. Turbulent upward fluxes occurred several times during the evenings and are explained by the formation of radiation fog. In connection with that, underestimates of the deposition are assumed. More detailed studies covering various seasons and all parameters and fluxes contributing to the local energy balance are suggested. This will help to further develop understanding about the processes of (i deposition of water to the desert, and (ii intensification of advection fog through additional formation of radiation fog.

Optimal design of permeable fiber network structures for fog harvesting.

Science.gov (United States)

Park, Kyoo-Chul; Chhatre, Shreerang S; Srinivasan, Siddarth; Cohen, Robert E; McKinley, Gareth H

2013-10-29

Fog represents a large untapped source of potable water, especially in arid climates. Numerous plants and animals use textural and chemical features on their surfaces to harvest this precious resource. In this work, we investigate the influence of the surface wettability characteristics, length scale, and weave density on the fog-harvesting capability of woven meshes. We develop a combined hydrodynamic and surface wettability model to predict the overall fog-collection efficiency of the meshes and cast the findings in the form of a design chart. Two limiting surface wettability constraints govern the re-entrainment of collected droplets and clogging of mesh openings. Appropriate tuning of the wetting characteristics of the surfaces, reducing the wire radii, and optimizing the wire spacing all lead to more efficient fog collection. We use a family of coated meshes with a directed stream of fog droplets to simulate a natural foggy environment and demonstrate a five-fold enhancement in the fog-collecting efficiency of a conventional polyolefin mesh. The design rules developed in this work can be applied to select a mesh surface with optimal topography and wetting characteristics to harvest enhanced water fluxes over a wide range of natural convected fog environments.

Fog water chemistry in the Namib desert, Namibia

Science.gov (United States)

Eckardt, Frank D.; Schemenauer, Robert S.

This study documents the ion concentrations and ion enrichment relative to sea water, in Namib Desert fog water, with the purpose of establishing its suitability for future fogwater collection schemes, while also examining claims that Namib Desert fog water carries exceptionally high concentrations of sulphate, which may be responsible for the formation of gypsum deposits in the desert. The work suggests that Namibian fog water is at least as clean as has been reported from other coastal deserts in South America and Arabia, and provides a source of very clean water for the coastal desert region of south-western Africa. It does not appear that fog is an efficient sulphur source for the formation of the gypsum deposits, unless rare events with high concentrations of marine sulphur compounds occur.

The effect of radioactive aerosols on fog formation

International Nuclear Information System (INIS)

Ali, G.; Khan, E.U.; Ali, N.; Khan, H.A.; Waheed, A.

2011-01-01

This research study has been carried out to explore the dependence of fog formation on radioactive aerosols. The aerosols containing radioactive nuclides are called radioactive aerosols. A large number of radioactive nuclides are present in the atmosphere among which the two most important nuclides, 7Be and 210Pb are considered here in this study. Results for Activity Concentrations of these radio-nuclides in air samples in clear and foggy conditions were comparatively analyzed. About 19% increase in Activity concentration for 210Pb and about 23% increase in Activity Concentration for 7Be was recorded during fog as compared to clear conditions. This increase in Activity Concentration during fog indicates that the presence of aerosols laden with these radio-nuclides is also one of the so many factors responsible for fog formation

Roles of Fog and Topography in Redwood Forest Hydrology

Science.gov (United States)

Francis, E. J.; Asner, G. P.

2017-12-01

Spatial variability of water in forests is a function of both climatic gradients that control water inputs and topo-edaphic variation that determines the flows of water belowground, as well as interactions of climate with topography. Coastal redwood forests are hydrologically unique because they are influenced by coastal low clouds, or fog, that is advected onto land by a strong coastal-to-inland temperature difference. Where fog intersects the land surface, annual water inputs from summer fog drip can be greater than that of winter rainfall. In this study, we take advantage of mapped spatial gradients in forest canopy water storage, topography, and fog cover in California to better understand the roles and interactions of fog and topography in the hydrology of redwood forests. We test a conceptual model of redwood forest hydrology with measurements of canopy water content derived from high-resolution airborne imaging spectroscopy, topographic variables derived from high-resolution LiDAR data, and fog cover maps derived from NASA MODIS data. Landscape-level results provide insight into hydrological processes within redwood forests, and cross-site analyses shed light on their generality.

Standard practice for modified salt spray (fog) testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers and sets forth conditions for five modifications in salt spray (fog) testing for specification purposes. These are in chronological order of their development: 1.1.1 Annex A1, acetic acid-salt spray test, continuous. 1.1.2 Annex A2, cyclic acidified salt spray test. 1.1.3 Annex A3, seawater acidified test, cyclic (SWAAT). 1.1.4 Annex A4, SO2 salt spray test, cyclic. 1.1.5 Annex A5, dilute electrolyte cyclic fog dry test. 1.2 This practice does not prescribe the type of modification, test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicabilit...

Warehouse Sanitation Workshop Handbook.

Science.gov (United States)

Food and Drug Administration (DHHS/PHS), Washington, DC.

This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

Statistical modeling of optical attenuation measurements in continental fog conditions

Science.gov (United States)

Khan, Muhammad Saeed; Amin, Muhammad; Awan, Muhammad Saleem; Minhas, Abid Ali; Saleem, Jawad; Khan, Rahimdad

2017-03-01

Free-space optics is an innovative technology that uses atmosphere as a propagation medium to provide higher data rates. These links are heavily affected by atmospheric channel mainly because of fog and clouds that act to scatter and even block the modulated beam of light from reaching the receiver end, hence imposing severe attenuation. A comprehensive statistical study of the fog effects and deep physical understanding of the fog phenomena are very important for suggesting improvements (reliability and efficiency) in such communication systems. In this regard, 6-months real-time measured fog attenuation data are considered and statistically investigated. A detailed statistical analysis related to each fog event for that period is presented; the best probability density functions are selected on the basis of Akaike information criterion, while the estimates of unknown parameters are computed by maximum likelihood estimation technique. The results show that most fog attenuation events follow normal mixture distribution and some follow the Weibull distribution.

The LXCXE Retinoblastoma Protein-Binding Motif of FOG-2 Regulates Adipogenesis.

Science.gov (United States)

Goupille, Olivier; Penglong, Tipparat; Kadri, Zahra; Granger-Locatelli, Marine; Denis, Raphaël; Luquet, Serge; Badoual, Cécile; Fucharoen, Suthat; Maouche-Chrétien, Leila; Leboulch, Philippe; Chrétien, Stany

2017-12-19

GATA transcription factors and their FOG cofactors play a key role in tissue-specific development and differentiation, from worms to humans. Mammals have six GATA and two FOG factors. We recently demonstrated that interactions between retinoblastoma protein (pRb) and GATA-1 are crucial for erythroid proliferation and differentiation. We show here that the LXCXE pRb-binding site of FOG-2 is involved in adipogenesis. Unlike GATA-1, which inhibits cell division, FOG-2 promotes proliferation. Mice with a knockin of a Fog2 gene bearing a mutated LXCXE pRb-binding site are resistant to obesity and display higher rates of white-to-brown fat conversion. Thus, each component of the GATA/FOG complex (GATA-1 and FOG-2) is involved in pRb/E2F regulation, but these molecules have markedly different roles in the control of tissue homeostasis. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Integration of Local Observations into the One Dimensional Fog Model PAFOG

Science.gov (United States)

Thoma, Christina; Schneider, Werner; Masbou, Matthieu; Bott, Andreas

2012-05-01

The numerical prediction of fog requires a very high vertical resolution of the atmosphere. Owing to a prohibitive computational effort of high resolution three dimensional models, operational fog forecast is usually done by means of one dimensional fog models. An important condition for a successful fog forecast with one dimensional models consists of the proper integration of observational data into the numerical simulations. The goal of the present study is to introduce new methods for the consideration of these data in the one dimensional radiation fog model PAFOG. First, it will be shown how PAFOG may be initialized with observed visibilities. Second, a nudging scheme will be presented for the inclusion of measured temperature and humidity profiles in the PAFOG simulations. The new features of PAFOG have been tested by comparing the model results with observations of the German Meteorological Service. A case study will be presented that reveals the importance of including local observations in the model calculations. Numerical results obtained with the modified PAFOG model show a distinct improvement of fog forecasts regarding the times of fog formation, dissipation as well as the vertical extent of the investigated fog events. However, model results also reveal that a further improvement of PAFOG might be possible if several empirical model parameters are optimized. This tuning can only be realized by comprehensive comparisons of model simulations with corresponding fog observations.

Occupational Exposure to Alcohol-Based Hand Sanitizers: The Diagnostic Role of Alcohol Biomarkers in Hair.

Science.gov (United States)

Salomone, A; Bozzo, A; Di Corcia, D; Gerace, E; Vincenti, M

2018-04-01

Ethyl glucuronide (EtG) and fatty acid ethyl esters (FAEEs) in hair are effective direct biomarkers of ethanol ingestion, whose analytical determination can be used to discriminate between chronic and occasional ethanol intake. Ethanol is a compound widely used in some workplaces (e.g., clinics, hospitals) and is present in considerable amounts in mouthwash for oral cleaning, medications, cosmetic products, hydro-alcoholic disinfectants and antiseptics for hands. This study examined the ethyl alcohol exposure derived from hand disinfectants (in gel form) by simulating the typical occupational situation of medical-health workers (healthcare workers, nurses, surgeons, etc.) who frequently wash their hands with antiseptic sanitizer. Two types of hand disinfectants with 62% w/w of ethanol content were daily applied to the hands of a teetotaler for 20 times a day, for 4 consecutive weeks, thus simulating a typical workplace situation and a cumulative dermal exposure to ethanol of ~1,100 g. Different matrices (head, chest and beard hair, urine) were regularly sampled and analyzed using a ultra high-performance liquid chromatography tandem massspectrometry validated method for EtG and a (HS)SPME-GC-MS validated technique for FAEEs. The data obtained showed that a significant dermal absorption and/or inhalation of ethanol occurred, and that the use of detergents produce urinary EtG concentrations both higher than the cut-offs normally used for clinical and forensic analyses (either 100 and 500 ng/mL, depending on the context). The concentrations of the ethanol metabolites in the keratin matrices were, respectively, below the cut-off of 7 pg/mg for EtG and below 0.5 ng/mg for FAAEs (0.35 ng/mg for ethyl palmitate). In conclusion, the regular use of alcohol-based hand sanitizers can affect the concentration of urinary EtG and lead to positive analytical results, particularly when specimens are obtained shortly after sustained use of ethanol-containing hand sanitizer. On the

International evolution of fat, oil and grease (FOG) waste management - A review

OpenAIRE

Wallace, Thomas; Gibbons, David; O'Dwyer, Michael; Curran, Thomas P.

2017-01-01

In recent years, issues relating to fat, oil and grease (FOG) in sewer systems have intensified. In the media, sewer blockages caused by FOG waste deposits, commonly referred to as 'fatbergs', are becoming a reminder of the problems that FOG waste can cause when left untreated. These FOG blockages lead to sanitary sewer overflows, property flooding and contamination of water bodies with sewage. Despite these financial and environmentally detrimental effects, a homogenous FOG waste management ...

Non-human primate FOG develops with advanced parkinsonism induced by MPTP Treatment.

Science.gov (United States)

Revuelta, Gonzalo J; Uthayathas, Subramaniam; Wahlquist, Amy E; Factor, Stewart A; Papa, Stella M

2012-10-01

Freezing of gait (FOG) is a debilitating feature of Parkinson's disease (PD) and other forms of parkinsonism. The anatomical or pathophysiological correlates are poorly understood largely due to the lack of a well-established animal model. Here we studied whether FOG is reproduced in the non-human primate (NHP) model of PD. 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-treated monkeys (Genus Macaca, n=29) were examined for the development of FOG, and the leg movements were recorded with accelerometry. The relationships between developing FOG and the animals' characteristics, the MPTP treatments, and the modeled outcomes were determined. In parkinsonian monkeys FOG developed frequently (48%) manifesting similar characteristics to those seen in PD patients. In addition, FOG episodes in the monkey were accompanied by leg trembling with the typical duration (2-10s) and frequency (~7 Hz). The development of NHP FOG was significantly associated with the severity of parkinsonism, as shown by high motor disability scores (≥ 20) and levodopa-induced dyskinesia scores (p=0.01 and p=0.04, respectively). Differences in demographics and MPTP treatments (doses, treatment duration, etc.) had no influence on NHP FOG occurrence, with the exception of gender that showed FOG predominance in males (p=0.03). The unique features of FOG in PD can be replicated in severely parkinsonian macaques, and this represents the first description of a FOG animal model. Published by Elsevier Inc.

Fog seal guidelines.

Science.gov (United States)

2003-10-01

Fog seals are a method of adding asphalt to an existing pavement surface to improve sealing or waterproofing, prevent further stone loss by holding aggregate in place, or simply improve the surface appearance. However, inappropriate use can result in...

Pattern recognition applied to infrared images for early alerts in fog

Science.gov (United States)

Boucher, Vincent; Marchetti, Mario; Dumoulin, Jean; Cord, Aurélien

2014-09-01

Fog conditions are the cause of severe car accidents in western countries because of the poor induced visibility. Its forecast and intensity are still very difficult to predict by weather services. Infrared cameras allow to detect and to identify objects in fog while visibility is too low for eye detection. Over the past years, the implementation of cost effective infrared cameras on some vehicles has enabled such detection. On the other hand pattern recognition algorithms based on Canny filters and Hough transformation are a common tool applied to images. Based on these facts, a joint research program between IFSTTAR and Cerema has been developed to study the benefit of infrared images obtained in a fog tunnel during its natural dissipation. Pattern recognition algorithms have been applied, specifically on road signs which shape is usually associated to a specific meaning (circular for a speed limit, triangle for an alert, …). It has been shown that road signs were detected early enough in images, with respect to images in the visible spectrum, to trigger useful alerts for Advanced Driver Assistance Systems.

Fog-basking behaviour and water collection efficiency in Namib Desert Darkling beetles

OpenAIRE

Dacke Marie; Nørgaard Thomas

2010-01-01

Abstract Background In the Namib Desert fog represents an alternative water source. This is utilised by Darkling beetles (Tenebrionidae) that employ different strategies for obtaining the fog water. Some dig trenches in the sand, while others use their own bodies as fog collectors assuming a characteristic fog-basking stance. Two beetle species from the genus Onymacris have been observed to fog-bask on the ridges of the sand dunes. These beetles all have smooth elytra surfaces, while another ...

Linking human health, climate change, and food security through ecological-based sanitation systems

Science.gov (United States)

Ryals, R.; Kramer, S.; Porder, S.; Andersen, G. L.

2015-12-01

Ensuring access to clean, safe sanitation for the world's population remains a challenging, yet critical, global sustainability goal. Ecological-based sanitation (EcoSan) technology is a promising strategy for improving sanitation, particularly in areas where financial resources and infrastructure are limiting. The composting of human waste and its use as an agricultural soil amendment can tackle three important challenges in developing countries - providing improved sanitation for vulnerable communities, reducing the spread of intestinal-born pathogens, and returning nutrients and organic matter to degraded agricultural soils. The extent of these benefits and potential tradeoffs are not well known, but have important implications for the widespread adoption of this strategy to promote healthy communities and enhance food security. We quantified the effects of EcoSan on the climate and human health in partnership with Sustainable Organic Integrated Livelihoods (SOIL) in Haiti. We measured greenhouse gas emissions (nitrous oxide, methane, and carbon dioxide) from compost piles that ranged in age from 0 to 14 months (i.e. finished) from two compost facilities managed with or without cement lining. We also measured emissions from a government-operated waste treatment pond and a grass field where waste has been illegally dumped. The highest methane emissions were observed from the anaerobic waste pond, whereas the dump site and compost piles had higher nitrous oxide emissions. Net greenhouse gases (CO2-equivalents) from unlined compost piles were 8x lower than lined compost piles and 20 and 30x lower than the dump and waste pond, respectively. We screened finished compost for fecal pathogens using bacterial 16S sequencing. Bacterial pathogens were eliminated regardless of the type of composting process. Pilot trials indicate that the application of compost to crops has a large potential for increasing food production. This research suggests that EcoSan systems are

Fog deposition fluxes of water and ions to a mountainous site in Central Europe

Science.gov (United States)

Klemm, Otto; Wrzesinsky, Thomas

2007-09-01

Fog and precipitation composition and deposition were measured over a 1-yr period. Ion concentrations were higher in fog than in precipitation by factors of between 6 and 18. The causes of these differences were less dilution of fog water due to non-availability of condensable water vapour, and more efficient transfer of surface emissions to fog water as compared to rain water or snow. Fogwater and dissolved ions depositions were measured with eddy covariance in combination with a bulk fogwater collector. Annual fogwater deposition was 9.4% that of precipitation. The annual deposition of ions through fog was of the same order as that for precipitation. Ammonium, representing local emission sources, had 46% more annual deposition through fog than through precipitation. The fog droplet number and mass size distributions are reported. Fog droplets of 15 μm diameter contribute most to the deposition flux. The variability of processes and parameters contributing to deposition of ions through fog (ion concentrations in fog water, liquid water content in air, fog duration and turbulence) is high.

Processing of atmospheric polycyclic aromatic hydrocarbons by fog in an urban environment.

Science.gov (United States)

Ehrenhauser, Franz S; Khadapkar, Kalindi; Wang, Youliang; Hutchings, James W; Delhomme, Olivier; Kommalapati, Raghava R; Herckes, Pierre; Wornat, Mary J; Valsaraj, Kalliat T

2012-10-26

Polycyclic aromatic hydrocarbons (PAH) are ubiquitous pollutants in the atmosphere, predominantly known for their toxicity. Although there has been substantial work on the atmospheric degradation of PAH, little is known about how the presence of atmospheric droplets (e.g., a fog cloud) affects the fate of PAH. In order to assess the processing of PAH and their corresponding oxidation products during a fog event, two field-sampling campaigns in Fresno, CA and Davis, CA were conducted. The simultaneous evaluation of concentrations of the PAH and oxygenated polycyclic aromatic compounds (OPAC) in the gas phase, particulate matter and fog water droplets before, during and after fog allows for the characterization of transformative and transport processes in a fog cloud. By tracking the ratio of OPAC to PAH in the individual atmospheric phases, two major polycyclic aromatic compounds-processing pathways can be identified: (i) the dissolution of OPAC from particulate matter and (ii) the uptake and oxidation of PAH in the fog water droplets. Wet deposition steadily decreases the pollutant concentration in the fog cloud droplets during a fog event; however, uptake and concentration via evaporative water loss upon the dissipation of a fog cloud cause an increase in the atmospheric pollutant concentration.

On the theoretical aspects of improved fog detection and prediction in India

Science.gov (United States)

Dey, Sagnik

2018-04-01

The polluted Indo-Gangetic Basin (IGB) in northern India experiences fog (a condition when visibility degrades below 1 km) every winter (Dec-Jan) causing a massive loss of economy and even loss of life due to accidents. This can be minimized by improved fog detection (especially at night) and forecasting so that activities can be reorganized accordingly. Satellites detect fog at night by a positive brightness temperature difference (BTD). However, fixing the right BTD threshold holds the key to accuracy. Here I demonstrate the sensitivity of BTD in response to changes in fog and surface emissivity and their temperatures and justify a new BTD threshold. Further I quantify the dependence of critical fog droplet number concentration, NF (i.e. minimum fog concentration required to degrade visibility below 1 km) on liquid water content (LWC). NF decreases exponentially with an increase in LWC from 0.01 to 1 g/m3, beyond which it stabilizes. A 10 times low bias in simulated LWC below 1 g/m3 would require 107 times higher aerosol concentration to form the required number of fog droplets. These results provide the theoretical aspects that will help improving the existing fog detection algorithm and fog forecasting by numerical models in India.

Participatory science and innovation for improved sanitation and hygiene: process and outcome evaluation of project SHINE, a school-based intervention in Rural Tanzania

Directory of Open Access Journals (Sweden)

Erin Hetherington

2017-02-01

Full Text Available Abstract Background Diarrheal disease is a major cause of mortality and morbidity in low and middle income countries with children being disproportionately affected. Project SHINE (Sanitation & Hygiene INnovation in Education is a grassroots participatory science education and social entrepreneurship model to engage youth and the wider community in the development of sustainable strategies to improve sanitation and hygiene. Methods Based in rural and remote Tanzania, this pilot study engaged pastoralist high-school students and communities in the development and evaluation of culturally and contextually relevant strategies to improve sanitation and hygiene. Using a train-the-trainer approach, key activities included teacher workshops, school-based lessons, extra-curricular activities, community events and a One Health sanitation science fair which showcased projects related to water, sanitation and hygiene in relation to human and animal health. The process and outcome of the study were evaluated through qualitative interviews and focus group discussions with diverse project participants, as well as pre- and post- questionnaires completed by students on knowledge, attitudes and practices concerning sanitation and hygiene. Results The questionnaire results at baseline and follow-up showed statistically significant improvements on key measures including a decrease in unhygienic behaviors, an increase in the perceived importance of handwashing and intention to use the toilet, and increased communication in the social network about the importance of clean water and improved sanitation and hygiene practices, however there were no significant changes in sanitation related knowledge. Qualitative data highlighted strong leadership emerging from youth and enthusiasm from teachers and students concerning the overall approach in the project, including the use of participatory methods. There was a high degree of community engagement with hundreds of

Participatory science and innovation for improved sanitation and hygiene: process and outcome evaluation of project SHINE, a school-based intervention in Rural Tanzania.

Science.gov (United States)

Hetherington, Erin; Eggers, Matthijs; Wamoyi, Joyce; Hatfield, Jennifer; Manyama, Mange; Kutz, Susan; Bastien, Sheri

2017-02-07

Diarrheal disease is a major cause of mortality and morbidity in low and middle income countries with children being disproportionately affected. Project SHINE (Sanitation & Hygiene INnovation in Education) is a grassroots participatory science education and social entrepreneurship model to engage youth and the wider community in the development of sustainable strategies to improve sanitation and hygiene. Based in rural and remote Tanzania, this pilot study engaged pastoralist high-school students and communities in the development and evaluation of culturally and contextually relevant strategies to improve sanitation and hygiene. Using a train-the-trainer approach, key activities included teacher workshops, school-based lessons, extra-curricular activities, community events and a One Health sanitation science fair which showcased projects related to water, sanitation and hygiene in relation to human and animal health. The process and outcome of the study were evaluated through qualitative interviews and focus group discussions with diverse project participants, as well as pre- and post- questionnaires completed by students on knowledge, attitudes and practices concerning sanitation and hygiene. The questionnaire results at baseline and follow-up showed statistically significant improvements on key measures including a decrease in unhygienic behaviors, an increase in the perceived importance of handwashing and intention to use the toilet, and increased communication in the social network about the importance of clean water and improved sanitation and hygiene practices, however there were no significant changes in sanitation related knowledge. Qualitative data highlighted strong leadership emerging from youth and enthusiasm from teachers and students concerning the overall approach in the project, including the use of participatory methods. There was a high degree of community engagement with hundreds of community members participating in school-based events

Sanitation planning in developing countries

OpenAIRE

Kerstens, S.M.

2016-01-01

Sanitation planning in developing countries: Added value of resource recovery Worldwide 2.5 billion people lack access to sanitation. This impacts human live, the environment and represents a loss of valuable resources that can be regained from wastewater. This study shows that resource recovery can be a potential driver to accelerate sanitation. A new sanitation decision framework for policy makers was created and tested in Indonesia. The variety of advantages and disadvantages of sanitatio...

Natural Contamination and Surface Flashover on Silicone Rubber Surface under Haze–Fog Environment

Directory of Open Access Journals (Sweden)

Ang Ren

2017-10-01

Full Text Available Anti-pollution flashover of insulator is important for power systems. In recent years, haze-fog weather occurs frequently, which makes discharge occurs easily on the insulator surface and accelerates insulation aging of insulator. In order to study the influence of haze-fog on the surface discharge of room temperature vulcanized silicone rubber, an artificial haze-fog lab was established. Based on four consecutive years of insulator contamination accumulation and atmospheric sampling in haze-fog environment, the contamination configuration appropriate for RTV-coated surface discharge test under simulation environment of haze-fog was put forward. ANSYS Maxwell was used to analyze the influence of room temperature vulcanized silicone rubber surface attachments on electric field distribution. The changes of droplet on the polluted room temperature vulcanized silicone rubber surface and the corresponding surface flashover voltage under alternating current (AC, direct current (DC positive polar (+, and DC negative polar (− power source were recorded by a high speed camera. The results are as follows: The main ion components from haze-fog atmospheric particles are NO3−, SO42−, NH4+, and Ca2+. In haze-fog environment, both the equivalent salt deposit density (ESDD and non-soluble deposit density (NSDD of insulators are higher than that under general environment. The amount of large particles on the AC transmission line is greater than that of the DC transmission line. The influence of DC polarity power source on the distribution of contamination particle size is not significant. After the deposition of haze-fog, the local conductivity of the room temperature vulcanized silicone rubber surface increased, which caused the flashover voltage reduce. Discharge is liable to occur at the triple junction point of droplet, air, and room temperature vulcanized silicone rubber surface. After the deformation or movement of droplets, a new triple junction

Robot Vision to Monitor Structures in Invisible Fog Environments Using Active Imaging Technology

Energy Technology Data Exchange (ETDEWEB)

Park, Seungkyu; Park, Nakkyu; Baik, Sunghoon; Choi, Youngsoo; Jeong, Kyungmin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Active vision is a direct visualization technique using a highly sensitive image sensor and a high intensity illuminant. Range-gated imaging (RGI) technique providing 2D and 3D images is one of emerging active vision technologies. The RGI technique extracts vision information by summing time sliced vision images. In the RGI system, objects are illuminated for ultra-short time by a high intensity illuminant and then the light reflected from objects is captured by a highly sensitive image sensor with the exposure of ultra-short time. The RGI system provides 2D and 3D image data from several images and it moreover provides clear images from invisible fog and smoke environment by using summing of time-sliced images. Nowadays, the Range-gated (RG) imaging is an emerging technology in the field of surveillance for security applications, especially in the visualization of invisible night and fog environment. Although RGI viewing was discovered in the 1960's, this technology is, nowadays, more and more applicable by virtue of the rapid development of optical and sensor technologies, such as highly sensitive imaging sensor and ultra-short pulse laser light. In contrast to passive vision systems, this technology enables operation even in harsh environments like fog and smoke. During the past decades, several applications of this technology have been applied in target recognition and in harsh environments, such as fog, underwater vision. Also, this technology has been demonstrated 3D imaging based on range-gated imaging. In this paper, a robot system to monitor structures in invisible fog environment is developed using an active range-gated imaging technique. The system consists of an ultra-short pulse laser device and a highly sensitive imaging sensor. The developed vision system is carried out to monitor objects in invisible fog environment. The experimental result of this newly approach vision system is described in this paper. To see invisible objects in fog

Robot Vision to Monitor Structures in Invisible Fog Environments Using Active Imaging Technology

International Nuclear Information System (INIS)

Park, Seungkyu; Park, Nakkyu; Baik, Sunghoon; Choi, Youngsoo; Jeong, Kyungmin

2014-01-01

Active vision is a direct visualization technique using a highly sensitive image sensor and a high intensity illuminant. Range-gated imaging (RGI) technique providing 2D and 3D images is one of emerging active vision technologies. The RGI technique extracts vision information by summing time sliced vision images. In the RGI system, objects are illuminated for ultra-short time by a high intensity illuminant and then the light reflected from objects is captured by a highly sensitive image sensor with the exposure of ultra-short time. The RGI system provides 2D and 3D image data from several images and it moreover provides clear images from invisible fog and smoke environment by using summing of time-sliced images. Nowadays, the Range-gated (RG) imaging is an emerging technology in the field of surveillance for security applications, especially in the visualization of invisible night and fog environment. Although RGI viewing was discovered in the 1960's, this technology is, nowadays, more and more applicable by virtue of the rapid development of optical and sensor technologies, such as highly sensitive imaging sensor and ultra-short pulse laser light. In contrast to passive vision systems, this technology enables operation even in harsh environments like fog and smoke. During the past decades, several applications of this technology have been applied in target recognition and in harsh environments, such as fog, underwater vision. Also, this technology has been demonstrated 3D imaging based on range-gated imaging. In this paper, a robot system to monitor structures in invisible fog environment is developed using an active range-gated imaging technique. The system consists of an ultra-short pulse laser device and a highly sensitive imaging sensor. The developed vision system is carried out to monitor objects in invisible fog environment. The experimental result of this newly approach vision system is described in this paper. To see invisible objects in fog

Observations and modeling of fog by cloud radar and optical sensors

NARCIS (Netherlands)

Li, Y.; Hoogeboom, P.; Russchenberg, H.

2014-01-01

Fog is a significant factor affecting the public traffic because visibility is reduced to a large extent. Therefore the determination of optical visibility in fog from radar instruments has received much interest. To observe fog with radar, high frequency bands (millimeter waves) have the best

Occupational skin diseases and prevention among sanitation workers in China.

Science.gov (United States)

Yan, Yuehua; Wang, Xinggang; Wu, Jianbo; Xu, Li

2015-09-01

Little research has been focused on the health status or the occupational protection awareness of sanitation workers. The policy recommendations on the occupational safety and health of sanitation workers based on the scientific research are also insufficient in developing countries like China. To study the incidence of dermatoses and the relevance with occupational exposure, protection awareness and protective measures among sanitation workers for better management and protection of the sanitation workers. 273 sanitation workers and 113 administrative staff from 11 streets of Wuhan were recruited. Dermatological problems were evaluated and recorded by physical examination. Occupational exposure, protection awareness, the use of protective equipments and personal history of skin disease were assessed by questionnaires. Compared with administrative staff, sanitation workers had much more occupational dermatological problems and had a much higher rate of harmful ultraviolet ray exposure. Young sanitation workers were more aware of occupational self-protection and a relatively higher rate of them using protective equipments compared with old ones. Exposure to multiple health hazards and the poor use of protective equipments are related to skin diseases in sanitation workers. Prejob training of self-protection and the use of protective equipments are recommended.

Fog-Assisted Operational Cost Reduction for Cloud Data Centers

OpenAIRE

Yu, Liang; Jiang, Tao; Zou, Yulong

2017-01-01

In this paper, we intend to reduce the operational cost of cloud data centers with the help of fog devices, which can avoid the revenue loss due to wide-area network propagation delay and save network bandwidth cost by serving nearby cloud users. Since fog devices may not be owned by a cloud service provider, they should be compensated for serving the requests of cloud users. When taking economical compensation into consideration, the optimal number of requests processed locally by each fog d...

Quantification of Fog Water Collection in Three Locations of Tenerife (Canary Islands

Directory of Open Access Journals (Sweden)

Axel Ritter

2015-06-01

Full Text Available We present the results of fog water collection obtained with cylindrical fog gauges at three locations on the northern side of Tenerife island (Spain: La Esperanza (1093 m a.s.l., Taborno (1015 m a.s.l., and El Gaitero (1747 m a.s.l.. Concomitant meteorological variables were also measured. We show that fog precipitation was more frequent than rainfall. However, the volumes and frequency of daily fog water collection varied among the three studied sites, usually not exceeding 10–40 L d−1/m2 of collecting surface. In La Esperanza, fog water harvesting occurred frequently, but was considerably lower than in the other two locations. However, while in Taborno fog water collection episodes were distributed throughout the period, in El Gaitero these were mainly concentrated in two periods, during autumn and winter 2012–2013. The study of the relationships between daily fog water yields and the averages of meteorological variables did not show any clear trend, but it suggested that the greater volumes of collected fog water were logically associated with higher wind speeds and lower solar radiation conditions. Fog water collection in La Esperanza and in Taborno typically occurred within a similar temperature interval (7.5–12.5 °C, while in El Gaitero the phenomenon was associated with a lower temperature range (2.5–10 °C.

Removal of micropollutants in source separated sanitation

OpenAIRE

Butkovskyi, A.

2015-01-01

Source separated sanitation is an innovative sanitation method designed for minimizing use of energy and clean drinking water, and maximizing reuse of water, organics and nutrients from waste water. This approach is based on separate collection and treatment of toilet wastewater (black water) and the rest of the domestic wastewater (grey water). Different characteristics of wastewater streams facilitate recovery of energy, nutrients and fresh water. To ensure agricultural or ecological reuse ...

Cool PDO phase leads to recent rebound in coastal southern California fog

Directory of Open Access Journals (Sweden)

Witiw, Michael R.

2015-12-01

Full Text Available The relationship between coastal fog in southern California and the Pacific Decadal Oscillation (PDO is investigated during the last decade. Fog occurrence was examined at two locations in southern California: San Diego and Los Angeles international airports. Both locations are located near the Pacific coast with strong marine influences. The period looked at was 2001 through 2012. The cool season (October-March and warm season (April-September were examined separately because of the different types of fog that prevail in each season. Previous studies have shown a relation between fog and the Pacific Decadal Oscillation (PDO. However, a switch in polarity in the PDO in the mid-1970s (from a cool to a warm phase coupled with a sharp decrease in particulate concentrations calls into question the strong relationship shown. Further studies suggest that the decrease in dense fog seen from the 1960s through the 1990s was largely due to increasing urban heat island effects coupled with a decrease in atmospheric particulate matter. Since 1998, the PDO again changed polarity and fog frequencies began to rise. However, urban heat island and particulate effects were relatively constant making it easier to isolate any effects of the PDO on fog occurrence. Previous studies examined the occurrence of dense fog (visibility less than 400 meters, but because of the decrease in fog in this category, 800 meters was chosen this time. That also corresponds to the 0.5 mile visibility which triggers special reports at the California airports when visibility moves through this threshold. Although there was no strong relationship between fog and PDO in the most recent period, Pacific Ocean oscillations were found to show significant relationships with fog frequencies historically. Upwelling indices show a significant relationship with fog frequencies when examined by the phase of the PDO. Even stronger relationships are found when selecting La Niña and El Niño events.

On the water-soluble organic nitrogen concentration and mass size distribution during the fog season in the Po Valley, Italy.

Science.gov (United States)

Montero-Martínez, Guillermo; Rinaldi, Matteo; Gilardoni, Stefania; Giulianelli, Lara; Paglione, Marco; Decesari, Stefano; Fuzzi, Sandro; Facchini, Maria Cristina

2014-07-01

The study of organic nitrogen gained importance in recent decades due to its links with acid rain, pollution, and eutrophication. In this study, aerosol and fog water samples collected from two sites in Italy during November 2011 were analyzed to characterize their organic nitrogen content. Organic nitrogen contributed 19-25% of the total soluble nitrogen in the aerosol and around 13% in fog water. The largest water soluble organic nitrogen concentrations in the PM1.2 fraction occurred during the diurnal period with mean values of 2.03 and 2.16 μg-N m(-3) (154 and 145 nmol-N m(-3)) at Bologna and San Pietro Capofiume (SPC), respectively. The mean PM10 WSON concentration during diurnal periods at SPC was 2.30 μg-N m(-3) (164 nmol-N m(-3)) while it was 1.34 and 0.82 μg-N m(-3) (95.7 and 58.5 nmol-N m(-3)) in the night and fog water samples, respectively. Aerosol mass distribution profiles obtained during fog changed significantly with respect to those estimated in periods without fog periods due to fog scavenging, which proved to be over 80% efficient. Linear correlations suggested secondary processes related to combustion and, to a lesser extent, biomass burning, as plausible sources of WSON. Regarding the inorganic nitrogen fraction, the results showed that ammonium was the largest soluble inorganic nitrogen component in the samples. Copyright © 2014 Elsevier B.V. All rights reserved.

Analysis of Cumulonimbus (Cb), Thunderstorm and Fog for Izmir Adnan Menderes Airport

Science.gov (United States)

Avsar, Ercument

2016-07-01

Demand for airline transport has been increasing day by day with the development of the aviation industry in Turkey. Meteorological conditions are among the most important factors that influence aviation facilities. Meteorological events cause delays and cancellation of flights which create economic and time losses, and they even lead to accidents and breakups. The most important meteorological events that affect the takeoff and landing of airplanes can be listed as wind, runway visual range, cloud, rain, icing, turbulence, and low level windshear. Meteorological events that affect the aviation facilities most often in Adnan Menderes Airport (LTBJ), the fourth largest airport in Turkey in terms of air traffic, are fog, Cumulonimbus (Cb) clouds and thunderstorms (TS-Thunderstorm). Therefore, it is important to identify the occurrence time of these events based on the analysis of data over many years and do the flight plans based on this meteorological information in order to make the aviation facilities safer and without delays. In this study, statistical analysis on the formation of Cb clouds, thunderstorm and foggy days is conducted using observations produced for aviation (METAR) and special observers (SPECI). It is found that there are two types of fog that are observed most often at LTBJ, namely radiation and advection fogs, accordingly to the results of statistical analysis based on data from 2004 to 2014. Fog events are found to occur most often in the months of December and January, during 04:00 - 07:00 UTC time interval, between pressure values over 1015-1020 hPa, in 130-190 degree light breeze (1-5KT) and in temperature levels between 5°C and 8°C. Thunderstorm events recorded at LTBJ between the years 2004 and 2014 are most often observed in the months of January and February, in 120-210 degree gentle breeze winds (6-10KT), and in temperature levels between 8 and 18 °C. Key Words: Adnan Menderes International Airport, LTBJ, Fog, Thunderstorm (TS), Cb

Mortality, fog and atmospheric pollution

Energy Technology Data Exchange (ETDEWEB)

Martin, A E; Bradley, W H

1960-01-01

A study was made associating climate and atmospheric pollution with excess mortality in greater London during the winter of 1958 and 1959. It was a particularly foggy winter with 6 major episodes, 4 of which resembled previous dangerous smogs. There were two additional periods of high pollution without fog. Excess mortality during these 8 periods ranged from 70 to 230. During one period, a flu epidemic accompanied the fog. In 4 to 6 foggy periods, morbidity (hospital bed demand) also increased. This small number of observations indicates mortality association: on 2/3 of days with high SO/sub 2/ (2.5 pphM) or high particulate soot (10 mg/m/sup 3/), and on all days with thick fog, there was an increase in mortality (20 deaths more than previous day) on that or the following day. Fifteen-day moving mortality index and bronchitis mortality index were significantly correlated with black suspended matter and SO/sub 2/; association with pneumonia was not significant. Also little or no relation between mortality and humidity, mean temperature, or barometric pressure was found. Rapid response of mortality to air pollution may indicate that pollution affects mostly those already ill.

Efficacy of sanitizers in reducing Salmonella on pecan nutmeats during cracking and shelling.

Science.gov (United States)

Beuchat, Larry R; Mann, David A; Alali, Walid Q

2013-05-01

Studies were done to evaluate the efficacy of chlorine (200 to 1,000 μg/ml), lactic acid (0.5 to 2%), levulinic acid (0.5 to 2%), sodium dodecyl sulfate (SDS, 0.05%), lactic acid plus SDS, levulinic acid plus SDS, and a mixed peroxyacid sanitizer (Tsunami 200, 40 and 80 μg/ml) in killing Salmonella on or in immersion- and on surface-inoculated pecan nutmeats (U.S. Department of Agriculture medium pieces and mammoth halves). The addition of SDS to treatment solutions containing lactic acid or levulinic acid resulted in generally higher reductions of Salmonella, but differences in these reductions were not always significant. Lactic and levulinic acids (2%) containing SDS (0.05%) were equivalent in killing Salmonella on immersion-inoculated nutmeats. Tsunami 200 (40 μg/ml) was less lethal or equivalent to 1 or 2% lactic and levulinic acids, with or without 0.05% SDS. Reductions did not exceed 1.1 log CFU/g of immersion-inoculated pieces and halves, regardless of sanitizer concentration or treatment time (up to 20 min). Reductions on surface-inoculated pieces and halves were 0.7 to 2.6 log CFU/g and 1.2 to 3.0 log CFU/g, respectively. Treatment with 2% lactic acid plus SDS (0.05%) and Tsunami (80 μg/ml) was most effective in killing Salmonella on surface-inoculated pieces; treatment of halves with chlorine (1,000 μg/ml) or lactic acid (1 or 2%), with or without SDS, was most efficacious. Exposure of immersion-inoculated pecan pieces to chlorine (200 μg/ml), lactic acid (2%) and levulinic acid (2%) with or without SDS, and Tsunami (80 μg/ml) during intermittent vacuum (18 ± 2 mbar) and ambient atmospheric pressure treatments for up to 20 min reduced Salmonella by only 0.1 to 1.0 log CFU/g. These studies emphasize the importance of preventing contamination of pecan nutmeats with Salmonella. Once nuts are contaminated, the lethality of sanitizers tested in this study is minimal.

29 CFR 1926.27 - Sanitation.

Science.gov (United States)

2010-07-01

...) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION General Safety and Health Provisions § 1926.27 Sanitation. Health and sanitation requirements for drinking water are contained in subpart D of this part. ... 29 Labor 8 2010-07-01 2010-07-01 false Sanitation. 1926.27 Section 1926.27 Labor Regulations...

Near-real time Monitoring of the widespread winter Fog over the Indo-Gangetic Plains using satellite data

Science.gov (United States)

Patil, D. L.; Gautam, R.; Rizvi, S.; Singh, M. K.

2016-12-01

The persistent and widespread winter fog impacts the Indo-Gangetic Plains (IGP) on an annual basis, disrupting day-to-day lives of millions of people in parts of northern India, Pakistan, Nepal and Bangladesh. The IGP is a densely-populated region located south of the Himalaya, in the northern parts of south Asia. During the past three decades or so, associated with growing population and energy demands, the IGP has witnessed strong upward trends in air pollution, particularly leading to poor air quality in the winter months. Co-occurring with the dense haze over the IGP, severe fog episodes persist throughout the months of December and January. Building on our recent work on satellite-based detection of fog, we have further extended the detection capability towards the development of a near-real time (NRT) fog monitoring system using satellite radiances and products. Here, we use multi-spectral radiances and aerosol/cloud retrievals from Terra/Aqua MODIS data for NRT fog monitoring over the IGP for both daytime as well as nighttime. Specifically, the nighttime fog detection algorithm employs a bi-spectral brightness temperature difference technique between two spectral channels: 3.9 μm and 11 μm. Our ongoing efforts also include extending fog detection capability in NRT to geostationary satellites, for providing continuous monitoring of the onset, evolution and spatial-temporal variation of fog, as well as the geospatial integration of surface meteorological observations of visibility, relative humidity, temperature. We anticipate that the ongoing and future development of a fog monitoring system may be of particular assistance to air and rail transportation management, as well as of general interest to the public. The outputs of fog detection algorithm and related aerosol/cloud parameters are operationally disseminated via http://fogsouthasia.com/.

Fog-water harvesting along the West Coast of South Africa: a ...

African Journals Online (AJOL)

Many parts of the West Coast of South Africa experience severe water shortages throughout the year. Despite the meager rainfall, however, the region is subject to a high incidence of fog which might provide water for water-poor communities. This paper investigates the fog water potential of the area. Since fog water ...

Comprehensive characterization of atmospheric organic matter in Fresno, California fog water.

Science.gov (United States)

Herckes, Pierre; Leenheer, Jerry A; Collett, Jeffrey L

2007-01-15

Fogwater collected during winter in Fresno (CA) was characterized by isolating several distinct fractions and characterizing them by infrared and nuclear magnetic resonance (NMR) spectroscopy. More than 80% of the organic matter in the fogwater was recovered and characterized. The most abundant isolated fractions were those comprised of volatile acids (24% of isolated carbon) and hydrophilic acids plus neutrals (28%). Volatile acids, including formic and acetic acid, have been previously identified as among the most abundant individual species in fogwater. Recovered hydrophobic acids exhibited some properties similar to aquatic fulvic acids. An insoluble particulate organic matter fraction contained a substantial amount of biological material, while hydrophilic and transphilic fractions also contained material suggestive of biotic origin. Together, these fractions illustrate the important contribution biological sources make to organic matter in atmospheric fog droplets. The fogwater also was notable for containing a large amount of organic nitrogen present in a variety of species, including amines, nitrate esters, peptides, and nitroso compounds.

29 CFR 1926.51 - Sanitation.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Sanitation. 1926.51 Section 1926.51 Labor Regulations... Sanitation. (a) Potable water. (1) An adequate supply of potable water shall be provided in all places of...; (iv) Combustion toilets. (4) The requirements of this paragraph (c) for sanitation facilities shall...

Dynamics of normal and superfluid fogs using diffusing-wave spectroscopy

International Nuclear Information System (INIS)

Kim, Heetae; Lemieux, Pierre-Anthony; Durian, Douglas J.; Williams, Gary A.

2004-01-01

The dynamics of normal and superfluid fogs are studied using the technique of diffusing-wave spectroscopy. For a water fog generated with a 1.75 MHz piezoelectric driver below the liquid surface, the 7 μm diameter droplets are found to have diffusive dynamics for correlation times long compared to the viscous time. For a fog of 10 μm diameter superfluid helium droplets in helium vapor at 1.5 K the motion appears to be ballistic for correlation times short compared to the viscous time. The velocity correlations between the helium droplets are found to depend on the initial velocity with which the droplets are injected from the helium surface into the fog

Understanding Acid Rain

Science.gov (United States)

Damonte, Kathleen

2004-01-01

The term acid rain describes rain, snow, or fog that is more acidic than normal precipitation. To understand what acid rain is, it is first necessary to know what an acid is. Acids can be defined as substances that produce hydrogen ions (H+), when dissolved in water. Scientists indicate how acidic a substance is by a set of numbers called the pH…

Hygiene and sanitation among ethnic minorities in Northern Vietnam

DEFF Research Database (Denmark)

Rheinländer, Thilde; Samuelsen, Helle; Dalsgaard, Anders

2010-01-01

Improving sanitation and hygiene to prevent infectious diseases is of high priority in developing countries. This study attempts to gain in-depth understanding of hygiene and sanitation perceptions and practices among four Ethnic Minority Groups (EMGs) in a rural area of northern Vietnam. It is b......-based hygiene promotion is also recommended to curb dependency and spark initiatives in ethnic minority communities. Finally, interventions should focus on hygiene "software"--promoting hygiene behaviour changes known to effectively prevent hygiene related diseases.......Improving sanitation and hygiene to prevent infectious diseases is of high priority in developing countries. This study attempts to gain in-depth understanding of hygiene and sanitation perceptions and practices among four Ethnic Minority Groups (EMGs) in a rural area of northern Vietnam...

Continental Fog Attenuation Empirical Relationship from Measured Visibility Data

Directory of Open Access Journals (Sweden)

F. Nadeem

2010-12-01

Full Text Available Free Space Optics (FSO has the great potential for future communication applications. However, weather influenced reduced availability had been the main cause for its restricted growth. Among different weather influences fog plays the major role. A new model generalized for all FSO wavelengths, has been proposed for the prediction of continental fog attenuation using visibility data. The performance of the proposed model has been compared with well known models for measured attenuation data of Continental fog. The comparison has been performed in terms of Root Mean Square Error (RMSE.

Prevalence and associated features of self-reported freezing of gait in Parkinson disease: The DEEP FOG study.

Science.gov (United States)

Amboni, M; Stocchi, F; Abbruzzese, G; Morgante, L; Onofrj, M; Ruggieri, S; Tinazzi, M; Zappia, M; Attar, M; Colombo, D; Simoni, L; Ori, A; Barone, P; Antonini, A

2015-06-01

Freezing of Gait (FOG) is a common and disabling symptom in patients with Parkinson disease (PD). The relationship between FOG and dopaminergic medication is complex. The aim of the present study was to estimate the prevalence of self-reported FOG, its associated clinical features, and its relationship with wearing-off in a wide PD population. This is an observational multicenter study of 634 consecutive non-demented PD patients. Patients were identified either as freezers or non-freezers based on item-3 of the Freezing of Gait-Questionnaire. FOG was then classified as on, off and onoff freezing based on its relationship with wearing-off. Patients were assessed with Unified Parkinson's Disease Rating Scale, Hoehn and Yahr scale, 8-item Parkinson's disease Questionnaire, Mini-Mental State Examination. Data from 593 patients were analyzed, 325 (54.3%) were freezers of whom 200 (61.6%) experienced FOG only during off state (off-freezers), 6 (1.8%) only during on state and 119 (36.6%) either in on and off states or independently of dopaminergic response-related symptoms (onoff-freezers). Overall, freezers vs non-freezers had longer disease duration, more advanced disease and greater disability. Moreover, freezers more frequently reported wearing-off and experienced worse quality of life. Onoff-freezers vs off-freezers were older, more severely disabled, less likely to experience wearing-off, treated with lower levodopa equivalent daily dose and with poorer cognitive performance. Self-reported FOG is mainly recognizable in advanced PD and is associated with more disability and worse quality of life. Onoff-FOG may represent the result of under-treatment or rather interpretable as a distinct clinical entity. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Optical properties of aerosol during haze-fog episodes in Beijing].

Science.gov (United States)

Yu, Xing-Na; Li, Xin-Mei; Deng, Zen-Grandeng; De, Qing-Yangzong; Yuan, Shuai

2012-04-01

The purpose of this study is to investigate the optical properties of aerosol during haze-fog episodes in Beijing. The aerosol optical depth (AOD), Angstrom exponent (alpha), size distribution and single scattering albedo (omega) during haze-fog episodes were analyzed between 2002 and 2008 using AERONENT data. During haze-fog episodes, the aerosol optical depth showed a decreasing trend with wavelengths, and showed high values with an average 1.34 at 440 nm. The magnitude of Angstrom exponent was relatively high during haze-fog episodes and the mean values reached 1.11. The frequency distribution of alpha was up to 94% when alpha > 0.9, indicating the predominance of fine particles during haze-fog episodes in Beijing. The aerosol volume size distributions presented a bimodal structure (fine and coarse modes). The maxima (peaks) radius of fine mode showed an increasing trend with AOD, however, those of coarse mode showed a decreasing trend with AOD. The size distribution showed a distinct difference in dominant mode for the different AOD. The single scattering albedo showed an increasing trend with AOD during haze-fog episodes in Beijing. The mean value of omega was 0.89 at the four wavelengths and the omega exhibited a low sensitivity to wavelengths.

Bridging the sanitation gap between disaster relief and development.

Science.gov (United States)

Lai, Ka-Man; Ramirez, Claudia; Liu, Weilong; Kirilova, Darina; Vick, David; Mari, Joe; Smith, Rachel; Lam, Ho-Yin; Ostovari, Afshin; Shibakawa, Akifumi; Liu, Yang; Samant, Sidharth; Osaro, Lucky

2015-10-01

By interpreting disasters as opportunities to initiate the fulfilment of development needs, realise the vulnerability of the affected community and environment, and extend the legacy of relief funds and effort, this paper builds upon the concept linking relief, rehabilitation and development (LRRD) in the sanitation sector. It aims to use a composite of case studies to devise a framework for a semi-hypothetical scenario to identify critical components and generic processes for a LRRD action plan. The scenario is based on a latrine wetland sanitation system in a Muslim community. Several sub-frameworks are developed: (i) latrine design; (ii) assessment of human waste treatment; (iii) connective sanitation promotion strategy; and (iv) ecological systems and environmental services for sanitation and development. This scenario illustrates the complex issues involved in LRRD in sanitation work and provides technical notes and references for a legacy plan for disaster relief and development. © 2015 The Author(s). Disasters © Overseas Development Institute, 2015.

Modelling fog in probabilistic consequence assessment

International Nuclear Information System (INIS)

Underwood, B.Y.

1993-02-01

Earlier work examined the potential influence of foggy weather conditions on the probabilistic assessment of the consequences of accidental releases of radioactive material to the atmosphere (PCA), in particular the impact of a fraction of the released aerosol becoming incorporated into droplets. A major uncertainty emerging from the initial scoping study concerned estimation of the fraction of the released material that would be taken up into droplets. An objective is to construct a method for handling in a PCA context the effect of fog on deposition, basing the method on the experience gained from prior investigations. There are two aspects to explicitly including the effect of fog in PCA: estimating the probability of occurrence of various types of foggy condition and calculating the impact on the conventional end-points of consequence assessment. For the first, a brief outline is given of the use of meteorological data by PCA computer codes, followed by a discussion of some routinely-recorded meteorological parameters that are pertinent to fog, such as the presentweather code and horizontal visibility. Four stylized scenarios are defined to cover a wide range of situations in which particle growth by uptake of water may have an important impact on deposition. A description is then given of the way in which routine meteorological data could be used to flag the presence of each of these conditions in the meteorological data file used by the PCA code. The approach developed to calculate the impact on deposition is pitched at a level of complexity appropriate to the PCA context and reflects the physical constraints of the system and accounts for the specific characteristics of the released aerosol. (Author)

Assessing the impact of the regular use (4 weeks of an alcohol-based hand sanitizer on TEWL and epidermal hydration

Directory of Open Access Journals (Sweden)

Henrique Silva

2015-12-01

Full Text Available The Stratum corneum is a principal protector against physical, chemical, biological aggression and water loss in human skin. The repeated use of alcohol-based hand sanitizers might result in dryness and aggression. This study aims to evaluate the impact of a four week-long regular use of an alcohol-based gel hand sanitizer on skin hydration on the epidermal ‘barrier’ function using a kinetic model to quantify TEWL desorption curves following a POST test. A group of 13 female (19.7 ± 1.0 years old washed one of their hands for 29 consecutive days with a commercially available ethanol-based gel sanitizer. TEWL, superficial hydration (SH and deep hydration (DH were measured on days 1, 8, 15, 22 and 29, while a continuous TEWL recording following a 24 hour POST was made on days 1, 15 and 29 on a second skin area. No differences were found for the control hand throughout the study. For the test hand an increase of TEWL was found between days 1 and 8, as well as an increase of SH and DH between days 1 and 22. No significant differences were found for the kinetic parameters. These results suggest that the frequent use of the sanitizer gel might alter the skin barrier function.

Effect of water fogs on the deliberate ignition of hydrogen. Final report

International Nuclear Information System (INIS)

Zalosh, R.G.; Bajpai, S.N.

1982-11-01

This report presents an experimental evaluation of the effects of water fog density, droplet diameter, and temperature on the lower flammable limit (LFL) of hydrogen-air-steam mixtures. The results show that the LFL for hydrogen in air at 20 0 C is only marginally higher with fog than without. Most of the nozzles tested at 20 0 C raised the hydrogen LFL from 4.0 vol % to about 4.8%, for the case of dense fogs with volume-average drop size in the range 45 to 90 microns. The lower flammable limit at 50 0 C was typically 7.2% for dense fogs with drop size in the range 25 to 50 microns. The lower flammable limit at 70 0 C was typically 7.6%. Typical fog concentrations ranged from 0.03 to 0.09 vol % at 20 0 C and decreased with increasing fog temperature. 7 figures, 4 tables

Determining Exposure Factors of Anti-Fogging, Dye, Disinfectant, Repellent, and Preservative Products in Korea.

Science.gov (United States)

Lee, Daeyeop; Kim, Joo-Hyon; Kim, Taksoo; Yoon, Hyojung; Jo, Areum; Lee, Byeongwoo; Lim, Hyunwoo; Kim, Pilje; Seo, Jungkwan

2018-01-30

Reliable exposure factors are essential to determine health risks posed by chemicals in consumer products. We analyzed five risk-concerned product categories (anti-fogging, dye, disinfectant, repellent, and preservative products) for 13 products (three car anti-fogging products, a lens anti-fogging product, two car dye products, two drain disinfectants, an air conditioner disinfectant, a chlorine-based disinfectant, a fabric repellent, an insect repellent for food, and a wood preservative) considered to be of high risk in order to determine exposure factors via web surveys and estimation of amount of product. Among the 3000 participants (1482 (49%) men) aged ≥19 years, drain disinfectants were used most frequently (38.2%); the rate of usage of the other products ranged between 1.1-24.0%. The usage rates for the consumer products differed by sex, age, income, and education. Some consumer products such as car and lens anti-fogging products, chlorine-based disinfectants, fabric repellents, and drain disinfectants were regularly used more than once a month, while car dye products, air conditioner disinfectants, insect repellents for food, and wood preservatives were not regularly used owing to the specific product purposes and seasonal needs. Our results could be used for managing or controlling chemical substances in consumer products and conducting accurate exposure assessments.

Assessing Women's Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure.

Science.gov (United States)

Caruso, Bethany A; Clasen, Thomas; Yount, Kathryn M; Cooper, Hannah L F; Hadley, Craig; Haardörfer, Regine

2017-07-11

Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women's sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women's concerns and negative experiences associated with sanitation.

Enterobacteriaceae and Salmonella recovered from non-sanitized and sanitized broiler hatching eggs

Science.gov (United States)

Sanitizing hatching eggs may reduce the chances that a flock will become colonized with Salmonella and reduce the numbers of other microorganisms, such as Enterobacteriaceae, that can depress hatchability. An experiment was conducted to determine if a quaternary-biguanide sanitizer applied as foam ...

Sanitation, Stress, and Life Stage: A Systematic Data Collection Study among Women in Odisha, India.

Science.gov (United States)

Hulland, Kristyna R S; Chase, Rachel P; Caruso, Bethany A; Swain, Rojalin; Biswal, Bismita; Sahoo, Krushna Chandra; Panigrahi, Pinaki; Dreibelbis, Robert

2015-01-01

Emerging evidence demonstrates how inadequate access to water and sanitation is linked to psychosocial stress, especially among women, forcing them to navigate social and physical barriers during their daily sanitation routines. We examine sanitation-related psychosocial stress (SRPS) across women's reproductive lives in three distinct geographic sites (urban slums, rural villages, and rural tribal villages) in Odisha, India. We explored daily sanitation practices of adolescent, newly married, pregnant, and established adult women (n = 60) and identified stressors encountered during sanitation. Responding to structured data collection methods, women ranked seven sanitation activities (defecation, urination, menstruation, bathing, post-defecation cleaning, carrying water, and changing clothes) based on stress (high to low) and level of freedom (associated with greatest freedom to having the most restrictions). Women then identified common stressors they encountered when practicing sanitation and sorted stressors in constrained piles based on frequency and severity of each issue. The constellation of factors influencing SRPS varies by life stage and location. Overall, sanitation behaviors that were most restricted (i.e., menstruation) were the most stressful. Women in different sites encountered different stressors, and the level of perceived severity varied based on site and life stage. Understanding the influence of place and life stage on SRPS provides a nuanced understanding of sanitation, and may help identify areas for intervention.

Fogs: Physical Basis, Characteristic Properties, and Impacts on the Environment and Human Health

Directory of Open Access Journals (Sweden)

José L. Pérez-Díaz

2017-10-01

Full Text Available This work presents a selective overview of natural fogs in terms of fog types, forms and states of occurrence, physical, micro-physical, chemical and dynamic properties, basic characterizing parameters, etc. In focus are related achievements and contributions reported mainly during the last decade and a half, as a result of both laboratory studies and field observations. Processes of homogeneous and heterogeneous nucleation are analyzed in the aspects of condensation, nuclei diversity and specifics, as related to the activation, growth and deposition of fog droplets. The effect is highlighted of the water vapor’s partial pressure on the surface tension of the liquid water–air interface and the freezing point of the water droplets. Some problems and aspects of fog modeling, parameterization, and forecasting are outlined and discussed on the examples of newly developed relevant 1D/3D theoretical models. Important issues of fog impacts on the air quality, ecosystems, water basins, societal life, and human health are also addressed and discussed, particularly in cases of anthropogenically modified (chemical, radioactive, etc. fogs. In view of reducing the possible negative effects of fogs, conclusions are drawn concerning the new demands and challenges to fog characterization imposed by the changing natural and social environment and the needs for new data on and approaches to more adequate observations of fog-related events.

Blood leakage detection during dialysis therapy based on fog computing with array photocell sensors and heteroassociative memory model.

Science.gov (United States)

Wu, Jian-Xing; Huang, Ping-Tzan; Lin, Chia-Hung; Li, Chien-Ming

2018-02-01

Blood leakage and blood loss are serious life-threatening complications occurring during dialysis therapy. These events have been of concerns to both healthcare givers and patients. More than 40% of adult blood volume can be lost in just a few minutes, resulting in morbidities and mortality. The authors intend to propose the design of a warning tool for the detection of blood leakage/blood loss during dialysis therapy based on fog computing with an array of photocell sensors and heteroassociative memory (HAM) model. Photocell sensors are arranged in an array on a flexible substrate to detect blood leakage via the resistance changes with illumination in the visible spectrum of 500-700 nm. The HAM model is implemented to design a virtual alarm unit using electricity changes in an embedded system. The proposed warning tool can indicate the risk level in both end-sensing units and remote monitor devices via a wireless network and fog/cloud computing. The animal experimental results (pig blood) will demonstrate the feasibility.

What is brain fog? An evaluation of the symptom in postural tachycardia syndrome.

Science.gov (United States)

Ross, Amanda J; Medow, Marvin S; Rowe, Peter C; Stewart, Julian M

2013-12-01

Adolescents with postural tachycardia syndrome (POTS) often experience ill-defined cognitive impairment referred to by patients as "brain fog." The objective of this study was to evaluate the symptom of brain fog as a means of gaining further insight into its etiology and potential palliative interventions. Eligible subjects who reported having been diagnosed with POTS were recruited from social media web sites. Subjects were asked to complete a 38-item questionnaire designed for this study, and the Wood mental fatigue inventory (WMFI). Responses were received from 138 subjects with POTS (88 % female), ranging in age from 14 to 29 years; 132 subjects reported brain fog. WMFI scores correlated with brain fog frequency and severity (P fog were "forgetful," "cloudy," and "difficulty focusing, thinking and communicating." The most frequently reported brain fog triggers were fatigue (91 %), lack of sleep (90 %), prolonged standing (87 %), dehydration (86 %), and feeling faint (85 %). Although aggravated by upright posture, brain fog was reported to persist after assuming a recumbent posture. The most frequently reported interventions for the treatment of brain fog were intravenous saline (77 %), stimulant medications (67 %), salt tablets (54 %), intra-muscular vitamin B-12 injections (48 %), and midodrine (45 %). Descriptors for "brain fog" are most consistent with it being a cognitive complaint. Factors other than upright posture may play a role in the persistence of this symptom. Subjects reported a number of therapeutic interventions for brain fog not typically used in the treatment of POTS that may warrant further investigation.

Coastal Fog in Atlantic Canada: Characterization and Projection in a Changing Climate

Science.gov (United States)

Duplessis, P.; Hartery, S.; Macdonald, A. M.; Wheeler, M.; Miller, J.; Bhatia, S.; Chang, R. Y. W.

2016-12-01

Marine and coastal fog in Atlantic Canada is usually advective and favored by the meeting of the warm Gulf Stream and cold Labrador Current. As moist warm air moves over cold water, it cools down and becomes supersaturated. The interactions between microphysical, dynamical and radiative processes can also be a determining element in the formation and persistence of fog, which makes fog forecasting a highly challenging task. Current parameterizations within models suffer notably from unresolved microphysical problems such as neglecting droplet concentration, which leads to errors in droplet density predictions of up to 50%. In the scope of improving our understanding of fog and its characteristics, our research group conducted a field study on the coast of Nova Scotia in Eastern Canada during the fog season of 2016. Meteorological variables, droplet and aerosol size distributions, chemical speciation and fog water composition were measured. Results from this study will be presented, along with projections in a changing climate.

Comparison of eggshell surface sanitization technologies and impacts on consumer acceptability.

Science.gov (United States)

Al-Ajeeli, Morouj N; Taylor, T Matthew; Alvarado, Christine Z; Coufal, Craig D

2016-05-01

Shell eggs can be contaminated with many types of microorganisms, including bacterial pathogens, and thus present a risk for the transmission of foodborne disease to consumers. Currently, most United States egg processors utilize egg washing and sanitization systems to decontaminate surfaces of shell eggs prior to packaging. However, previous research has indicated that current shell egg sanitization technologies employed in the commercial egg industry may not completely eliminate bacteria from the surface of eggshells, and thus alternative egg sanitization technologies with the potential for increased microbial reductions on eggshells should be investigated. The objectives of this study were to compare the antimicrobial efficacy and consumer sensory attributes of industry-available eggshell sanitization methods (chlorine and quaternary ammonium compounds (QAC) applied via spray) to various alternative egg sanitization technologies. Eggs (White Leghorn hens; n=195) were obtained for evaluation of sanitizer-induced reduction in mesophilic aerobic bacteria (n=90) or inoculated Salmonella Enteritidis (SE) reduction (n=105). Sanitizing treatments evaluated in this experiment were: chlorine spray (100 ppm available chlorine), QAC spray (200 ppm), peracetic acid spray (PAA; 135 ppm) alone or in combination with ultraviolet light (UV; 254 nm), and hydrogen peroxide (H2O2; 3.5% solution) spray in combination with UV (H2O2+UV). For enumeration of aerobic bacteria, eggs were sampled at 0, 7, and 14 days of storage at 4°C; surviving SE cells from inoculated eggs were enumerated by differential plating. Sensory trials were conducted to determine consumer liking of scrambled eggs made from eggs sanitized with chlorine, QAC, H2O2+UV, or no treatment (control). The H2O2 and UV treatment resulted in the greatest reductions in eggshell aerobic plate counts compared to other treatments throughout egg storage (Peggs represents a novel technology that could have important

Shared sanitation: to include or to exclude?

Science.gov (United States)

Mara, Duncan

2016-05-01

Just over 600 million people used shared sanitation in 2015, but this form of sanitation is not considered 'improved sanitation' or, in the current terminology, 'basic sanitation' by WHO/UNICEF, principally because they are typically unhygienic. Recent research has shown that neighbour-shared toilets perform much better than large communal toilets. The successful development of community-designed, built and managed sanitation-and-water blocks in very poor urban areas in India should be adapted and adopted throughout urban slums in developing countries, with a caretaker employed to keep the facilities clean. Such shared sanitation should be classified as 'basic', sometimes as 'safely-managed', sanitation, so contributing to the achievement of the sanitation target of the Sustainable Development Goals. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

76 FR 44906 - Foremost 4809-ES Insect-O-Fog; Amended Cancellation Order

Science.gov (United States)

2011-07-27

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2009-1017; FRL-8880-8] Foremost 4809-ES Insect-O-Fog... cancellation order for the pesticide product Foremost 4809-ES Insect-O-Fog, a pesticide product containing Piperonyl Butoxide and Pyrethrins. The registrant of Foremost 4809-ES Insect-O-Fog--Delta Foremost Chemical...

Quantification of Fog Water Collection in Three Locations of Tenerife (Canary Islands)

OpenAIRE

Ritter, Axel; Regalado, Carlos; Guerra, Juan

2015-01-01

We present the results of fog water collection obtained with cylindrical fog gauges at three locations on the northern side of Tenerife island (Spain): La Esperanza (1093 m a.s.l.), Taborno (1015 m a.s.l.), and El Gaitero (1747 m a.s.l.). Concomitant meteorological variables were also measured. We show that fog precipitation was more frequent than rainfall. However, the volumes and frequency of daily fog water collection varied among the three studied sites, usually not exceeding 10–40 L d−1/...

SUMOylation regulates the transcriptional repression activity of FOG-2 and its association with GATA-4.

Science.gov (United States)

Perdomo, José; Jiang, Xing-Mai; Carter, Daniel R; Khachigian, Levon M; Chong, Beng H

2012-01-01

Friend of GATA 2 (FOG-2), a co-factor of several GATA transcription factors (GATA-4, -5 and 6), is a critical regulator of coronary vessel formation and heart morphogenesis. Here we demonstrate that FOG-2 is SUMOylated and that this modification modulates its transcriptional activity. FOG-2 SUMOylation occurs at four lysine residues (K324, 471, 915, 955) [corrected]. Three of these residues are part of the characteristic SUMO consensus site (ψKXE), while K955 is found in the less frequent TKXE motif. Absence of SUMOylation did not affect FOG-2's nuclear localization. However, mutation of the FOG-2 SUMOylation sites, or de-SUMOylation, with SENP-1 or SENP-8 resulted in stronger transcriptional repression activity in both heterologous cells and cardiomyocytes. Conversely, increased FOG-2 SUMOylation by overexpression of SUMO-1 or expression of a SUMO-1-FOG-2 fusion protein rendered FOG-2 incapable of repressing GATA-4-mediated activation of the B-type natriuretic peptide (BNP) promoter. Moreover, we demonstrate both increased interaction between a FOG-2 SUMO mutant and GATA-4 and enhanced SUMOylation of wild-type FOG-2 by co-expression of GATA-4. These data suggest a new dynamics in which GATA-4 may alter the activity of FOG-2 by influencing its SUMOylation status.

Predicting Short-Term Electricity Demand by Combining the Advantages of ARMA and XGBoost in Fog Computing Environment

Directory of Open Access Journals (Sweden)

Chuanbin Li

2018-01-01

Full Text Available With the rapid development of IoT, the disadvantages of Cloud framework have been exposed, such as high latency, network congestion, and low reliability. Therefore, the Fog Computing framework has emerged, with an extended Fog Layer between the Cloud and terminals. In order to address the real-time prediction on electricity demand, we propose an approach based on XGBoost and ARMA in Fog Computing environment. By taking the advantages of Fog Computing framework, we first propose a prototype-based clustering algorithm to divide enterprise users into several categories based on their total electricity consumption; we then propose a model selection approach by analyzing users’ historical records of electricity consumption and identifying the most important features. Generally speaking, if the historical records pass the test of stationarity and white noise, ARMA is used to model the user’s electricity consumption in time sequence; otherwise, if the historical records do not pass the test, and some discrete features are the most important, such as weather and whether it is weekend, XGBoost will be used. The experiment results show that our proposed approach by combining the advantage of ARMA and XGBoost is more accurate than the classical models.

High repetition rate ultrashort laser cuts a path through fog

Science.gov (United States)

de la Cruz, Lorena; Schubert, Elise; Mongin, Denis; Klingebiel, Sandro; Schultze, Marcel; Metzger, Thomas; Michel, Knut; Kasparian, Jérôme; Wolf, Jean-Pierre

2016-12-01

We experimentally demonstrate that the transmission of a 1030 nm, 1.3 ps laser beam of 100 mJ energy through fog increases when its repetition rate increases to the kHz range. Due to the efficient energy deposition by the laser filaments in the air, a shockwave ejects the fog droplets from a substantial volume of the beam, at a moderate energy cost. This process opens prospects for applications requiring the transmission of laser beams through fogs and clouds.

Recurrent lactic acidosis secondary to hand sanitizer ingestion.

Science.gov (United States)

Wilson, M E; Guru, P K; Park, J G

2015-01-01

Due to their ability to decrease the spread of infection, hand sanitizers are now ubiquitous in health care settings. We present the case of a 50-year-old woman who was admitted with acute alcohol intoxication and had near complete recovery in 12 hrs. Subsequently, she was found unresponsive on the floor of her hospital room on two separate occasions. Evaluations revealed repeatedly elevated levels of ethanol, acetone, and lactate as well as increased anion gap and hypotension, requiring intensive care unit evaluation and intubation for airway protection. During the second episode, she was found next to an empty bottle of ethanol-based hospital hand sanitizer. She confirmed ingesting hand sanitizer in order to become intoxicated.

Recurrent lactic acidosis secondary to hand sanitizer ingestion

Directory of Open Access Journals (Sweden)

M E Wilson

2015-01-01

Full Text Available Due to their ability to decrease the spread of infection, hand sanitizers are now ubiquitous in health care settings. We present the case of a 50-year-old woman who was admitted with acute alcohol intoxication and had near complete recovery in 12 hrs. Subsequently, she was found unresponsive on the floor of her hospital room on two separate occasions. Evaluations revealed repeatedly elevated levels of ethanol, acetone, and lactate as well as increased anion gap and hypotension, requiring intensive care unit evaluation and intubation for airway protection. During the second episode, she was found next to an empty bottle of ethanol-based hospital hand sanitizer. She confirmed ingesting hand sanitizer in order to become intoxicated.

Carbon Oxides Gases for Occupancy Counting and Emergency Control in Fog Environment

Directory of Open Access Journals (Sweden)

Kairong Duan

2018-03-01

Full Text Available The information of human occupancy plays a crucial role in building management. For instance, fewer people, less demand for heat and electricity supply, and vice versa. Moreover, when there is a fire in a building, it is convenient to know how many persons in a single room there are in order to plan a more efficient rescue strategy. However, currently most buildings have not installed adequate devices that can be used to count the number of people, and the most popular embedded fire alarm system triggers a warning only when a fire breaks out with plenty of smoke. In view of this constraint, in this paper we propose a carbon oxides gases based warning system to detect potential fire breakouts and to estimate the number of people in the proximity. In order to validate the efficiency of the devised system, we simulate its application in the Fog Computing environment. Furthermore, we also improve the iFogSim by giving data analytics capacity to it. Based on this framework, energy consumption, latency, and network usage of the designed system obtained from iFogSim are compared with those obtained from Cloud environment.

Beliefs, Behaviors, and Perceptions of Community-Led Total Sanitation and Their Relation to Improved Sanitation in Rural Zambia

Science.gov (United States)

Joseph Lawrence, J.; Yeboah-Antwi, Kojo; Biemba, Godfrey; Ram, Pavani K.; Osbert, Nicolas; Sabin, Lora L.; Hamer, Davidson H.

2016-01-01

Inadequate hygiene and sanitation remain leading global contributors to morbidity and mortality in children and adults. One strategy for improving sanitation access is community-led total sanitation (CLTS), in which participants are guided into self-realization of the importance of sanitation through activities called “triggering.” This qualitative study explored community members' and stakeholders' sanitation, knowledge, perceptions, and behaviors during early CLTS implementation in Zambia. We conducted 67 in-depth interviews and 24 focus group discussions in six districts in Zambia 12–18 months after CLTS implementation. Triggering activities elicited strong emotions, including shame, disgust, and peer pressure, which persuaded individuals and families to build and use latrines and handwashing stations. New sanitation behaviors were also encouraged by the hierarchical influences of traditional leaders and sanitation action groups and by children's opinions. Poor soil conditions were identified as barriers to latrine construction. Taboos, including prohibition of different generations of family members, in-laws, and opposite genders from using the same toilet, were barriers for using sanitation facilities. CLTS, through community empowerment and ownership, produced powerful responses that encouraged construction and use of latrines and handwashing practices. These qualitative data suggest that CLTS is effective for improving sanitation beliefs and behaviors in Zambia. PMID:26787149

sanitizing effect of acetic aci andvegetables in k ffect of acetic acid

African Journals Online (AJOL)

userpc

Kabir, A.*,. Department of Microbiolog. Corresponding autho. ABSTRACT. Fruits and vegetables promote good hea contaminants. To assess the sanitizing effe. 16 samples of sliced fruits and vegetables local government Kano. Samples were anal standard plate count (SPC). The samples concentration and exposure time ...

21 CFR 120.6 - Sanitation standard operating procedures.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Sanitation standard operating procedures. 120.6... Provisions § 120.6 Sanitation standard operating procedures. (a) Sanitation controls. Each processor shall have and implement a sanitation standard operating procedure (SSOP) that addresses sanitation...

Stochastic geometry model for multi-channel fog radio access networks

KAUST Repository

Emara, Mostafa; Elsawy, Hesham; Sorour, Sameh; Al-Ghadhban, Samir; Alouini, Mohamed-Slim; Al-Naffouri, Tareq Y.

2017-01-01

Cache-enabled base station (BS) densification, denoted as a fog radio access network (F-RAN), is foreseen as a key component of 5G cellular networks. F-RAN enables storing popular files at the network edge (i.e., BS caches), which empowers local

Alternative sanitization methods for minimally processed lettuce in comparison to sodium hypochlorite.

Science.gov (United States)

Bachelli, Mara Lígia Biazotto; Amaral, Rívia Darla Álvares; Benedetti, Benedito Carlos

2013-01-01

Lettuce is a leafy vegetable widely used in industry for minimally processed products, in which the step of sanitization is the crucial moment for ensuring a safe food for consumption. Chlorinated compounds, mainly sodium hypochlorite, are the most used in Brazil, but the formation of trihalomethanes from this sanitizer is a drawback. Then, the search for alternative methods to sodium hypochlorite has been emerging as a matter of great interest. The suitability of chlorine dioxide (60 mg L(-1)/10 min), peracetic acid (100 mg L(-1)/15 min) and ozonated water (1.2 mg L(-1)/1 min) as alternative sanitizers to sodium hypochlorite (150 mg L(-1) free chlorine/15 min) were evaluated. Minimally processed lettuce washed with tap water for 1 min was used as a control. Microbiological analyses were performed in triplicate, before and after sanitization, and at 3, 6, 9 and 12 days of storage at 2 ± 1 °C with the product packaged on LDPE bags of 60 μm. It was evaluated total coliforms, Escherichia coli, Salmonella spp., psicrotrophic and mesophilic bacteria, yeasts and molds. All samples of minimally processed lettuce showed absence of E. coli and Salmonella spp. The treatments of chlorine dioxide, peracetic acid and ozonated water promoted reduction of 2.5, 1.1 and 0.7 log cycle, respectively, on count of microbial load of minimally processed product and can be used as substitutes for sodium hypochlorite. These alternative compounds promoted a shelf-life of six days to minimally processed lettuce, while the shelf-life with sodium hypochlorite was 12 days.

Sulfate Formation Enhanced by a Cocktail of High NOx, SO2, Particulate Matter, and Droplet pH during Haze-Fog Events in Megacities in China: An Observation-Based Modeling Investigation.

Science.gov (United States)

Xue, Jian; Yuan, Zibing; Griffith, Stephen M; Yu, Xin; Lau, Alexis K H; Yu, Jian Zhen

2016-07-19

In recent years in a few Chinese megacities, fog events lasting one to a few days have been frequently associated with high levels of aerosol loading characterized by high sulfate (as high as 30 μg m(-3)), therefore termed as haze-fog events. The concomitant pollution characteristics include high gas-phase mixing ratios of SO2 (up to 71 ppbv) and NO2 (up to 69 ppbv), high aqueous phase pH (5-6), and smaller fog droplets (as low as 2 μm), resulting from intense emissions from fossil fuel combustion and construction activities supplying abundant Ca(2+). In this work, we use an observation-based model for secondary inorganic aerosols (OBM-SIA) to simulate sulfate formation pathways under conditions of haze-fog events encountered in Chinese megacities. The OBM analysis has identified, at a typical haze-fogwater pH of 5.6, the most important pathway to be oxidation of S(IV) by dissolved NO2, followed by the heterogeneous reaction of SO2 on the aerosol surface. The aqueous phase oxidation of S(IV) by H2O2 is a very minor formation pathway as a result of the high NOx conditions suppressing H2O2 formation. The model results indicate that the unique cocktail of high fogwater pH, high concentrations of NO2, SO2, and PM, and small fog droplets are capable of greatly enhancing sulfate formation. Such haze-fog conditions could lead to rapid sulfate production at night and subsequently high PM2.5 in the morning when the fog evaporates. Sulfate formation is simulated to be highly sensitive to fogwater pH, PM, and precursor gases NO2 and SO2. Such insights on major contributing factors imply that reduction of road dust and NOx emissions could lessen PM2.5 loadings in Chinese megacities during fog events.

The sanitation value chain: its concept and new research collaboration project

Science.gov (United States)

Funamizu, N.

2017-03-01

Sanitation is essential for promoting health, preventing environment pollution, conserving ecosystem, and recovering and recycling resources. Therefore, it can be said that sanitation is closely related to such current global issues as poverty, urban slum, conservation of ecosystem, and resources management. Namely, the question, “How can we handle the waste from 10 billion people in future?” is a global environmental problem to be solved. In developing world, population is growing rapidly especially in urban slums and they have still high under 5 mortality and poverty issues. It also reported that 2.4 billion people are still using unimproved sanitation facilities, including 946 million people who are still practicing open defecation in 2015 (UN, 2015). On the other hand, depopulation and aging are progressing especially in rural area of developed world. Based on the above mentioned background, new research project on sanitation value chain has started. This is a collaboration project with LIPI, RIHN (Research Institute of Humanity and Nature, Kyoto) and HU (Hokkaido University). The concept of the sanitation value chain and the brief summary of the project are discussed in the keynote presentation. The concept of sanitation value chain proposed in the project : The project is proposing new concept, Sanitation Value Chain, which has the following basic policies: 1) Put values of people/and community in the centre of discussion, and prepare sanitation system to drive this value chain; 2) Design the sanitation system by focusing on incentive for individual users and community; 3) Recognize a sanitation system as an integrated system with social and technical systems; 4) Design the sanitation system by making a good matching between social characteristics and prerequisites of the technologies. The goals of the research are 1) To propose the Sanitation Value Chain as a common solution for both developing and developed countries, 2) To show the validity of the

Why gender matters in the solution towards safe sanitation? Reflections from rural India.

Science.gov (United States)

Khanna, Tina; Das, Madhumita

2016-12-01

While the topic of women and water, sanitation and hygiene is a widely accepted concern among academics and activists, it continues to be an issue in developing countries with serious consequences. Based on a qualitative research conducted in rural Uttar Pradesh, India, the paper affirms that sanitation issues for women and girls are compounded by inequitable gender norms that put them at greater risk of experiencing violence and multiple health vulnerabilities. Women, despite having a high demand for safe toilet facilities, continue to practise unsafe sanitation. The findings highlight the role of three structural constraints as the key factors influencing toilet construction and use: poverty, inadequate sanitation policy and its implementation and gender-based power dynamics at the household level. The paper concludes by emphasising the relevance of engendering sanitation programmes and policies by involving women and girls in the planning process to ensure that dignified and gender-sensitive sanitation solutions are developed. The paper also stresses the need to have measures for strengthening and effectively implementing a sanitation policy for the poor and for programmes to work with both men and women to address gender power relations which influence toilet adoption and use.

Robust planning of sanitation services in urban informal settlements: An analytical framework.

Science.gov (United States)

Schmitt, Rafael J P; Morgenroth, Eberhard; Larsen, Tove A

2017-03-01

New types of sanitation services are emerging to tackle the sanitation crisis in informal settlements. These services link toilet facilities to semi-decentralized treatment plants via frequent, road-based transport of excreta. However, information for the planning of such sanitation services is scarce, and their future operating conditions are highly uncertain. The key questions of this paper are therefore: a) what are the drivers behind success or failure of a service-based sanitation system in informal settlements and b) on what scales and under which conditions can such a system operate successfully? To answer these questions, already at an early stage of the planning process, we introduce a stochastic model to analyze a wide range of system designs under varying technical designs, socio-economic factors, and spatial condition. Based on these initial results, we design a sanitation service and use the numeric model to study its reliability and costs over a wide range of scales, i.e., system capacities, from very few to many hundred users per semi-decentralized treatment unit. Key findings are that such a system can only operate within a narrow, but realistic range of conditions. Key requirements are toilet facilities, which can be serviced rapidly, and a flexible workforce. A high density of facilities will also lower the costs. Under these premises, we develop a road-based sanitation service and model its functionality in different settings and under many scenarios. Results show that the developed sanitation system using a single vehicle is scalable (100-700 users), can provide reliable service, and can be cheap (settlements and presents a quantitative framework for designing such systems. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sanitation, Stress, and Life Stage: A Systematic Data Collection Study among Women in Odisha, India.

Directory of Open Access Journals (Sweden)

Kristyna R S Hulland

Full Text Available Emerging evidence demonstrates how inadequate access to water and sanitation is linked to psychosocial stress, especially among women, forcing them to navigate social and physical barriers during their daily sanitation routines. We examine sanitation-related psychosocial stress (SRPS across women's reproductive lives in three distinct geographic sites (urban slums, rural villages, and rural tribal villages in Odisha, India. We explored daily sanitation practices of adolescent, newly married, pregnant, and established adult women (n = 60 and identified stressors encountered during sanitation. Responding to structured data collection methods, women ranked seven sanitation activities (defecation, urination, menstruation, bathing, post-defecation cleaning, carrying water, and changing clothes based on stress (high to low and level of freedom (associated with greatest freedom to having the most restrictions. Women then identified common stressors they encountered when practicing sanitation and sorted stressors in constrained piles based on frequency and severity of each issue. The constellation of factors influencing SRPS varies by life stage and location. Overall, sanitation behaviors that were most restricted (i.e., menstruation were the most stressful. Women in different sites encountered different stressors, and the level of perceived severity varied based on site and life stage. Understanding the influence of place and life stage on SRPS provides a nuanced understanding of sanitation, and may help identify areas for intervention.

Assessment of community led total sanitation uptake in rural Kenya ...

African Journals Online (AJOL)

Background: Community Led Total Sanitation (CLTS) is an innovative community led drive to set up pit latrines in rural Kenya with an aim of promoting sustainable sanitation through behaviour change. It's a behaviour change approach based on social capital that triggers households to build pit latrines without subsidy.

SUMOylation regulates the transcriptional repression activity of FOG-2 and its association with GATA-4.

Directory of Open Access Journals (Sweden)

José Perdomo

Full Text Available Friend of GATA 2 (FOG-2, a co-factor of several GATA transcription factors (GATA-4, -5 and 6, is a critical regulator of coronary vessel formation and heart morphogenesis. Here we demonstrate that FOG-2 is SUMOylated and that this modification modulates its transcriptional activity. FOG-2 SUMOylation occurs at four lysine residues (K324, 471, 915, 955 [corrected]. Three of these residues are part of the characteristic SUMO consensus site (ψKXE, while K955 is found in the less frequent TKXE motif. Absence of SUMOylation did not affect FOG-2's nuclear localization. However, mutation of the FOG-2 SUMOylation sites, or de-SUMOylation, with SENP-1 or SENP-8 resulted in stronger transcriptional repression activity in both heterologous cells and cardiomyocytes. Conversely, increased FOG-2 SUMOylation by overexpression of SUMO-1 or expression of a SUMO-1-FOG-2 fusion protein rendered FOG-2 incapable of repressing GATA-4-mediated activation of the B-type natriuretic peptide (BNP promoter. Moreover, we demonstrate both increased interaction between a FOG-2 SUMO mutant and GATA-4 and enhanced SUMOylation of wild-type FOG-2 by co-expression of GATA-4. These data suggest a new dynamics in which GATA-4 may alter the activity of FOG-2 by influencing its SUMOylation status.

Assessing Women’s Negative Sanitation Experiences and Concerns: The Development of a Novel Sanitation Insecurity Measure

Directory of Open Access Journals (Sweden)

Bethany A. Caruso

2017-07-01

Full Text Available Lack of access to acceptable sanitation facilities can expose individuals, particularly women, to physical, social, and mental health risks. While some of the challenges have been documented, standard metrics are needed to determine the extent to which women have urination- and defecation-related concerns and negative experiences. Such metrics also are needed to assess the effectiveness of interventions to mitigate them. We developed a sanitation insecurity measure to capture the range and frequency of women’s sanitation-related concerns and negative experiences. Research was conducted in rural Odisha, India with women across various life course stages to reflect a range of perspectives. This paper documents the mixed data collection methods and the exploratory and confirmatory factor analyses we employed to arrive at a final measure. The final sanitation insecurity measure includes 50 items across seven factors that reflect the physical environment, the social environment, and individual-level constraints. Most factor scores were significantly higher for unmarried women and for women who lacked access to functional latrines, indicating social and environmental influence on experiences. This measure will enable researchers to evaluate how sanitation insecurity affects health and to determine if and how sanitation interventions ameliorate women’s concerns and negative experiences associated with sanitation.

Alcohol-based instant hand sanitizer use in military settings: a prospective cohort study of Army basic trainees.

Science.gov (United States)

Mott, Peter J; Sisk, Brian W; Arbogast, James W; Ferrazzano-Yaussy, Cristina; Bondi, Cara A M; Sheehan, James J

2007-11-01

We investigated the impact of a customized alcohol-based instant hand sanitizer hand-hygiene regimen in an Army basic training setting. The entire population at the U.S. Army Field Artillery Training Center, Fort Sill, Oklahoma, participated in the 13-week prospective cohort study between January 18, 2005 and April 18, 2005. Two training battalions were randomly assigned to the control group, one to the primary intervention group (customized Purell Instant Hand Sanitizer regimen, education, reinforcement) and one to the secondary intervention group (customized Purell Instant Hand Sanitizer regimen). When compared to the control group, intervention groups experienced 40% less respiratory illness (p < 0.001), 48% less gastrointestinal illness (p < 0.02), 44% less lost training time (p < 0.001), and 31% fewer health care encounters (p < 0.001). These findings suggest that this intervention is capable of significantly reducing illness in this setting and has the potential to help reduce absenteeism in the military workforce as a whole.

Blue Bahia: an environmental sanitation project

International Nuclear Information System (INIS)

Azcona, Miguel Angel L.; Neuvirth, Bruno

1996-01-01

The paper presents actions developed to incorporate some aspects of environmental sanitation to the basic sanitation project, natural resources assessing, identification of the environmental degradation sources - in addition to those caused by lack of basic sanitation, and common action between public and private sectors

9 CFR 147.23 - Hatchery sanitation.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Hatchery sanitation. 147.23 Section... AGRICULTURE LIVESTOCK IMPROVEMENT AUXILIARY PROVISIONS ON NATIONAL POULTRY IMPROVEMENT PLAN Sanitation Procedures § 147.23 Hatchery sanitation. An effective program for the prevention and control of Salmonella...

Fabrication of Biomimetic Fog-Collecting Superhydrophilic-Superhydrophobic Surface Micropatterns Using Femtosecond Lasers.

Science.gov (United States)

Kostal, Elisabeth; Stroj, Sandra; Kasemann, Stephan; Matylitsky, Victor; Domke, Matthias

2018-03-06

The exciting functionalities of natural superhydrophilic and superhydrophobic surfaces served as inspiration for a variety of biomimetic designs. In particular, the combination of both extreme wetting states to micropatterns opens up interesting applications, as the example of the fog-collecting Namib Desert beetle shows. In this paper, the beetle's elytra were mimicked by a novel three-step fabrication method to increase the fog-collection efficiency of glasses. In the first step, a double-hierarchical surface structure was generated on Pyrex wafers using femtosecond laser structuring, which amplified the intrinsic wetting property of the surface and made it superhydrophilic (water contact angle 150°). In the last step, the Teflon-like coating was selectively removed by fs-laser ablation to uncover superhydrophilic spots below the superhydrophobic surface, following the example of the Namib Desert beetle's fog-collecting elytra. To investigate the influence on the fog-collection behavior, (super)hydrophilic, (super)hydrophobic, and low and high contrast wetting patterns were fabricated on glass wafers using selected combinations of these three processing steps and were exposed to fog in an artificial nebulizer setup. This experiment revealed that high-contrast wetting patterns collected the highest amount of fog and enhanced the fog-collection efficiency by nearly 60% compared to pristine Pyrex glass. The comparison of the fog-collection behavior of the six samples showed that the superior fog-collection efficiency of surface patterns with extreme wetting contrast is due to the combination of water attraction and water repellency: the superhydrophilic spots act as drop accumulation areas, whereas the surrounding superhydrophobic areas allow a fast water transportation caused by gravity. The presented method enables a fast and flexible surface functionalization of a broad range of materials including transparent substrates, which offers exciting possibilities for

9 CFR 416.12 - Development of Sanitation SOP's.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Development of Sanitation SOP's. 416... ACT SANITATION § 416.12 Development of Sanitation SOP's. (a) The Sanitation SOP's shall describe all... direct contamination or adulteration of product(s). (b) The Sanitation SOP's shall be signed and dated by...

FogBank: a single cell segmentation across multiple cell lines and image modalities.

Science.gov (United States)

Chalfoun, Joe; Majurski, Michael; Dima, Alden; Stuelten, Christina; Peskin, Adele; Brady, Mary

2014-12-30

Many cell lines currently used in medical research, such as cancer cells or stem cells, grow in confluent sheets or colonies. The biology of individual cells provide valuable information, thus the separation of touching cells in these microscopy images is critical for counting, identification and measurement of individual cells. Over-segmentation of single cells continues to be a major problem for methods based on morphological watershed due to the high level of noise in microscopy cell images. There is a need for a new segmentation method that is robust over a wide variety of biological images and can accurately separate individual cells even in challenging datasets such as confluent sheets or colonies. We present a new automated segmentation method called FogBank that accurately separates cells when confluent and touching each other. This technique is successfully applied to phase contrast, bright field, fluorescence microscopy and binary images. The method is based on morphological watershed principles with two new features to improve accuracy and minimize over-segmentation. First, FogBank uses histogram binning to quantize pixel intensities which minimizes the image noise that causes over-segmentation. Second, FogBank uses a geodesic distance mask derived from raw images to detect the shapes of individual cells, in contrast to the more linear cell edges that other watershed-like algorithms produce. We evaluated the segmentation accuracy against manually segmented datasets using two metrics. FogBank achieved segmentation accuracy on the order of 0.75 (1 being a perfect match). We compared our method with other available segmentation techniques in term of achieved performance over the reference data sets. FogBank outperformed all related algorithms. The accuracy has also been visually verified on data sets with 14 cell lines across 3 imaging modalities leading to 876 segmentation evaluation images. FogBank produces single cell segmentation from confluent cell

Experimental FSO network availability estimation using interactive fog condition monitoring

Science.gov (United States)

Turán, Ján.; Ovseník, Łuboš

2016-12-01

Free Space Optics (FSO) is a license free Line of Sight (LOS) telecommunication technology which offers full duplex connectivity. FSO uses infrared beams of light to provide optical broadband connection and it can be installed literally in a few hours. Data rates go through from several hundreds of Mb/s to several Gb/s and range is from several 100 m up to several km. FSO link advantages: Easy connection establishment, License free communication, No excavation are needed, Highly secure and safe, Allows through window connectivity and single customer service and Compliments fiber by accelerating the first and last mile. FSO link disadvantages: Transmission media is air, Weather and climate dependence, Attenuation due to rain, snow and fog, Scattering of laser beam, Absorption of laser beam, Building motion and Air pollution. In this paper FSO availability evaluation is based on long term measured data from Fog sensor developed and installed at TUKE experimental FSO network in TUKE campus, Košice, Slovakia. Our FSO experimental network has three links with different physical distances between each FSO heads. Weather conditions have a tremendous impact on FSO operation in terms of FSO availability. FSO link availability is the percentage of time over a year that the FSO link will be operational. It is necessary to evaluate the climate and weather at the actual geographical location where FSO link is going to be mounted. It is important to determine the impact of a light scattering, absorption, turbulence and receiving optical power at the particular FSO link. Visibility has one of the most critical influences on the quality of an FSO optical transmission channel. FSO link availability is usually estimated using visibility information collected from nearby airport weather stations. Raw data from fog sensor (Fog Density, Relative Humidity, Temperature measured at each ms) are collected and processed by FSO Simulator software package developed at our Department. Based

FOG-2 mediated recruitment of the NuRD complex regulates cardiomyocyte proliferation during heart development.

Science.gov (United States)

Garnatz, Audrey S; Gao, Zhiguang; Broman, Michael; Martens, Spencer; Earley, Judy U; Svensson, Eric C

2014-11-01

FOG-2 is a multi-zinc finger protein that binds the transcriptional activator GATA4 and modulates GATA4-mediated regulation of target genes during heart development. Our previous work has demonstrated that the Nucleosome Remodeling and Deacetylase (NuRD) complex physically interacts with FOG-2 and is necessary for FOG-2 mediated repression of GATA4 activity in vitro. However, the relevance of this interaction for FOG-2 function in vivo has remained unclear. In this report, we demonstrate the importance of FOG-2/NuRD interaction through the generation and characterization of mice homozygous for a mutation in FOG-2 that disrupts NuRD binding (FOG-2(R3K5A)). These mice exhibit a perinatal lethality and have multiple cardiac malformations, including ventricular and atrial septal defects and a thin ventricular myocardium. To investigate the etiology of the thin myocardium, we measured the rate of cardiomyocyte proliferation in wild-type and FOG-2(R3K5A) developing hearts. We found cardiomyocyte proliferation was reduced by 31±8% in FOG-2(R3K5A) mice. Gene expression analysis indicated that the cell cycle inhibitor Cdkn1a (p21(cip1)) is up-regulated 2.0±0.2-fold in FOG-2(R3K5A) hearts. In addition, we demonstrate that FOG-2 can directly repress the activity of the Cdkn1a gene promoter, suggesting a model by which FOG-2/NuRD promotes ventricular wall thickening by repression of this cell cycle inhibitor. Consistent with this notion, the genetic ablation of Cdkn1a in FOG-2(R3K5A) mice leads to an improvement in left ventricular function and a partial rescue of left ventricular wall thickness. Taken together, our results define a novel mechanism in which FOG-2/NuRD interaction is required for cardiomyocyte proliferation by directly down-regulating the cell cycle inhibitor Cdkn1a during heart development. Copyright © 2014 Elsevier Inc. All rights reserved.

Dimethylmercury: A Source of Monomethylmercury in Fog Mechelle Johnson, BS in progress, Math and Science, Kirkwood Community College, Cedar Rapids, IA and Kenneth Coale, PhD, Chemical Oceanography, Moss Landing Marine Laboratories, Moss Landing, CA

Science.gov (United States)

Johnson, M.

2016-02-01

Dimethylmercury (DMHg) and monomethylmercury (MMHg) are two naturally occurring neurotoxins found in marine systems. MMHg bioaccumulates in tissues causing increased concentrations in the food web. Recent studies show that maritime advective fog transports MMHg from the oceans to land where terrestrial biota also accumulate this neurotoxin. Gaseous evasion of DMHg has recently been proposed as a potential source of MMHg to fog, but the mechanism of its conversion remains unknown. In this study we show that photodemethylation is a factor in the conversion of DMHg to MMHg, thus a potential source of MMHg in fog. Seawater samples were collected from a CTD rosette in two upwelling zones in the northeastern Pacific Ocean. Samples were incubated both in the sunlight and in darkness and DMHg was subsequently analyzed. The difference between light and dark-incubated samples inform the lability of MMHg to photolysis. Results show whereas photodemethylation doesn't occur in natural seawater, it does occur at significant rates under acidic conditions. Since fog water is acidic, these findings suggest photodemethylation may occur atmospherically, once absorbed in fog. These experiments inform the source and cycling of mercury from oceans to terrestrial ecosystems.

A facile strategy for the fabrication of a bioinspired hydrophilic-superhydrophobic patterned surface for highly efficient fog-harvesting

KAUST Repository

Wang, Yuchao

2015-08-10

Fog water collection represents a meaningful effort in the places where regular water sources, including surface water and ground water, are scarce. Inspired by the amazing fog water collection capability of Stenocara beetles in the Namib Desert and based on the recent work in biomimetic water collection, this work reported a facile, easy-to-operate, and low-cost method for the fabrication of hydrophilic-superhydrophobic patterned hybrid surface toward highly efficient fog water collection. The essence of the method is incorporating a (super)hydrophobically modified metal-based gauze onto the surface of a hydrophilic polystyrene (PS) flat sheet by a simple lab oven-based thermal pressing procedure. The produced hybrid patterned surfaces consisted of PS patches sitting within the holes of the metal gauzes. The method allows for an easy control over the pattern dimension (e.g., patch size) by varying gauze mesh size and thermal pressing temperature, which is then translated to an easy optimization of the ultimate fog water collection efficiency. Given the low-cost and wide availability of both PS and metal gauze, this method has a great potential for scaling-up. The results showed that the hydrophilic-superhydrophobic patterned hybrid surfaces with a similar pattern size to Stenocara beetles’s back pattern produced significantly higher fog collection efficiency than the uniformly (super)hydrophilic or (super)hydrophobic surfaces. This work contributes to general effort in fabricating wettability patterned surfaces and to atmospheric water collection for direct portal use.

Numerical Simulations of an Inversion Fog Event in the Salt Lake Valley during the MATERHORN-Fog Field Campaign

Science.gov (United States)

Chachere, Catherine N.; Pu, Zhaoxia

2018-01-01

An advanced research version of the Weather Research and Forecasting (WRF) Model is employed to simulate a wintertime inversion fog event in the Salt Lake Valley during the Mountain Terrain Atmospheric Modeling and Observations Program (MATERHORN) field campaign during January 2015. Simulation results are compared to observations obtained from the field program. The sensitivity of numerical simulations to available cloud microphysical (CM), planetary boundary layer (PBL), radiation, and land surface models (LSMs) is evaluated. The influence of differing visibility algorithms and initialization times on simulation results is also examined. Results indicate that the numerical simulations of the fog event are sensitive to the choice of CM, PBL, radiation, and LSM as well as the visibility algorithm and initialization time. Although the majority of experiments accurately captured the synoptic setup environment, errors were found in most experiments within the boundary layer, specifically a 3° warm bias in simulated surface temperatures compared to observations. Accurate representation of surface and boundary layer variables are vital in correctly predicting fog in the numerical model.

Heat transfer from a high temperature condensable mixture. II. Sedimentation of fog condensate

International Nuclear Information System (INIS)

Condiff, D.W.; Cho, D.H.; Chan, S.H.

1985-01-01

A kinematic wave analysis of fog sedimentation is employed to relate growth of a fog condensate deposit layer to radiation generated fog formation rates. The increase of surface radiation absorptivity with deposit layer thickness promotes a feedback mechanism for higher growth rates, which is evaluated in detail

Statistical modelling of Fat, Oil and Grease (FOG) deposits in wastewater pump sumps.

Science.gov (United States)

Nieuwenhuis, Eva; Post, Johan; Duinmeijer, Alex; Langeveld, Jeroen; Clemens, François

2018-05-15

The accumulation of FOG (Fat, Oil and Grease) deposits in sewer pumping stations results in an increase in maintenance costs, malfunctioning of pumps and, a potential increase of wastewater spills in receiving open water bodies. It is thought that a variety of parameters (e.g. geometry of the pump sump, pump operation, socioeconomic parameters of the catchment) influences the built-up of FOG. Based on a database containing data of 126 pumping stations located in five Dutch municipalities a statistical model was built. It is shown that 3 parameters are most significant in explaining the occurrence of FOG deposits: mean income of the population in a catchment, the amount of energy (kinetic and potential) per m 3 per day and the density of restaurants, bars and hotels in a catchment. Further it is shown that there are significant differences between municipalities that can be traced back to the local 'design paradigm'. For example, in Amsterdam, the design philosophy of discharging in the pump sump under the water surface (and hence maintaining a low level of turbulence in the pump sump) results in an increase of the probability of the formation of FOG. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Why do households invest in sanitation in rural Benin: Health, wealth, or prestige?

Science.gov (United States)

Gross, Elena; Günther, Isabel

2014-10-01

Seventy percent of the rural population in sub-Saharan Africa does not use adequate sanitation facilities. In rural Benin, as much as 95% of the population does not use improved sanitation. By analyzing a representative sample of 2000 rural households, this paper explores why households remain without latrines. Our results show that wealth and latrine prices play the most decisive role for sanitation demand and ownership. At current income levels, sanitation coverage will only increase to 50% if costs for construction are reduced from currently 190 USD to 50 USD per latrine. Our analysis also suggests that previous sanitation campaigns, which were based on prestige and the allure of a modern lifestyle as motives for latrine construction, have had no success in increasing sanitation coverage. Moreover, improved public health, which is the objective of public policies promoting sanitation, will not be effective at low sanitation coverage rates. Fear at night, especially of animals, and personal harassment, are stated as the most important motivational factors for latrine ownership and the intention to build one. We therefore suggest changing the message of sanitation projects and introduce new low-cost technologies into rural markets; otherwise, marketing strategies will continue to fail in increasing sanitation demand.

Research on the Spatial-Temporal Distribution Pattern of the Network Attention of Fog and Haze in China

Science.gov (United States)

Weng, Lingyan; Han, Xugao

2018-01-01

Understanding the spatial-temporal distribution pattern of fog and haze is the base to deal with them by adjusting measures to local conditions. Taking 31 provinces in China mainland as the research areas, this paper collected data from Baidu index on the network attention of fog and haze in relevant areas from 2011 to 2016, and conducted an analysis of their spatial-temporal distribution pattern by using autocorrelation analysis. The results show that the network attention of fog and haze has an overall spatial distribution pattern of “higher in the eastern and central, lower in the western China”. There are regional differences in different provinces in terms of network attention. Network attention of fog and haze indicates an obvious geographical agglomeration phenomenon, which is a gradual enlargement of the agglomeration area of higher value with a slight shrinking of those lower value agglomeration areas.

Frequency of fog in midlands of England

Energy Technology Data Exchange (ETDEWEB)

Unsworth, M.H.; Shakespeare, N.W.; Milner, A.E.; Ganendra, T.S.

1979-01-01

A survey shows that at a rural site in the Trent Basin in England, there has been a considerable reduction in winter fog frequency in the last 20 years. The evidence suggests that the Clean Air Act, which was primarily designed to improve air quality in towns has also produced measurable decreases in fog frequency in rural parts of this industrial region. The mechanism which is believed to underly the phenomenon is that the number of condensation nuclei have been substantially reduced. 9 references, 4 figures, 1 table.

A multi-structural and multi-functional integrated fog collection system in cactus.

Science.gov (United States)

Ju, Jie; Bai, Hao; Zheng, Yongmei; Zhao, Tianyi; Fang, Ruochen; Jiang, Lei

2012-01-01

Multiple biological structures have demonstrated fog collection abilities, such as beetle backs with bumps and spider silks with periodic spindle-knots and joints. Many Cactaceae species live in arid environments and are extremely drought-tolerant. Here we report that one of the survival systems of the cactus Opuntia microdasys lies in its efficient fog collection system. This unique system is composed of well-distributed clusters of conical spines and trichomes on the cactus stem; each spine contains three integrated parts that have different roles in the fog collection process according to their surface structural features. The gradient of the Laplace pressure, the gradient of the surface-free energy and multi-function integration endow the cactus with an efficient fog collection system. Investigations of the structure-function relationship in this system may help us to design novel materials and devices to collect water from fog with high efficiencies.

A multi-structural and multi-functional integrated fog collection system in cactus

Science.gov (United States)

Ju, Jie; Bai, Hao; Zheng, Yongmei; Zhao, Tianyi; Fang, Ruochen; Jiang, Lei

2012-01-01

Multiple biological structures have demonstrated fog collection abilities, such as beetle backs with bumps and spider silks with periodic spindle-knots and joints. Many Cactaceae species live in arid environments and are extremely drought-tolerant. Here we report that one of the survival systems of the cactus Opuntia microdasys lies in its efficient fog collection system. This unique system is composed of well-distributed clusters of conical spines and trichomes on the cactus stem; each spine contains three integrated parts that have different roles in the fog collection process according to their surface structural features. The gradient of the Laplace pressure, the gradient of the surface-free energy and multi-function integration endow the cactus with an efficient fog collection system. Investigations of the structure–function relationship in this system may help us to design novel materials and devices to collect water from fog with high efficiencies. PMID:23212376

Effect of heat transfer in the fog region during core reflooding

International Nuclear Information System (INIS)

Rouai, N. M.; El-sawy, H. M.

1993-01-01

Core reflooding following a loss of coolant accident (LOCA) in a pressurized water reactor (PWR) received considerable attention during the past thirty years. In this paper a one dimensional model is used to study the effect of the heat transfer in the fog region ahead of the wet front reflooding rate of a cylindrical fuel element following a LOCA in a PWR. The heat conduction equation in the cladding is solved in coordinate system moving with the wet front under a variety of condition to investigate the effects of such parameters as the initial cladding surface temperature, the decay heat generation rate in the fuel and the mode of heat transfer prevailing. The cladding surface is divided into three axial regions according to the mechanism of heat transfer, namely, a boiling region behind the wet front, a fog region ahead of the wet front and a dry region further downstream of the wet front. The effect of changing the heat transfer coefficient in the fog region on the rewetting rate and on the fog length is investigated. The results of this simple model show that increasing the heat transfer in the fog region increases the rewetting velocity and consequently decreases the fog length. The results are in general agreement with a more accurate two-dimensional model and experimental data. (author)

Cross stratum resources protection in fog-computing-based radio over fiber networks for 5G services

Science.gov (United States)

Guo, Shaoyong; Shao, Sujie; Wang, Yao; Yang, Hui

2017-09-01

In order to meet the requirement of internet of things (IoT) and 5G, the cloud radio access network is a paradigm which converges all base stations computational resources into a cloud baseband unit (BBU) pool, while the distributed radio frequency signals are collected by remote radio head (RRH). A precondition for centralized processing in the BBU pool is an interconnection fronthaul network with high capacity and low delay. However, it has become more complex and frequent in the interaction between RRH and BBU and resource scheduling among BBUs in cloud. Cloud radio over fiber network has been proposed in our previous work already. In order to overcome the complexity and latency, in this paper, we first present a novel cross stratum resources protection (CSRP) architecture in fog-computing-based radio over fiber networks (F-RoFN) for 5G services. Additionally, a cross stratum protection (CSP) scheme considering the network survivability is introduced in the proposed architecture. The CSRP with CSP scheme can effectively pull the remote processing resource locally to implement the cooperative radio resource management, enhance the responsiveness and resilience to the dynamic end-to-end 5G service demands, and globally optimize optical network, wireless and fog resources. The feasibility and efficiency of the proposed architecture with CSP scheme are verified on our software defined networking testbed in terms of service latency, transmission success rate, resource occupation rate and blocking probability.

Possible connection between the East Asian summer monsoon and a swing of the haze-fog-prone area in eastern China

Science.gov (United States)

Liu, Qian; Cao, Ziqi; Sheng, Lifang; Diao, Yina; Wang, Wencai; Zhou, Yang; Qiu, Jingyi

2018-05-01

The summer monsoon has recently been hypothesized to influence haze-fog events over China, but the detailed processes involved have yet to be determined. In the present study, we found that the haze-fog-prone area swings over eastern China during boreal summer (May to September), coinciding with the movement of the subtropical monsoon convergence belt (hereinafter referred to simply as the "convergence belt"). Further investigation showed that the convergence belt modulates the spatial distribution of the haze-fog-prone area by altering the regional atmospheric conditions. When the warm and wet summer monsoon air mass pushes northwards and meets with cold air, a frontal zone (namely, the convergence belt) forms. The ascent of warm and wet air along the front strengthens the atmospheric stability ahead of the frontal zone, while the descent of cold and dry air weakens the vertical diffusion at the same place. These processes result in an asymmetric distribution of haze-fog along the convergence belt. Based on the criterion of absolute stability and downdraft, these atmospheric conditions favorable for haze-fog are able to identify 57-79% of haze-fog-prone stations, and the anticipation accuracy is 61-71%. After considering the influence of air pollutants on haze-fog occurrence, the anticipation accuracy rises to 78-79%. Our study reveals a connection between local haze-fog weather phenomena and regional atmospheric conditions and large-scale circulation, and demonstrates one possible mechanism for how the summer monsoon influences the distribution of haze-fog in eastern China.

Blood leakage detection during dialysis therapy based on fog computing with array photocell sensors and heteroassociative memory model

Science.gov (United States)

Wu, Jian-Xing; Huang, Ping-Tzan; Li, Chien-Ming

2018-01-01

Blood leakage and blood loss are serious life-threatening complications occurring during dialysis therapy. These events have been of concerns to both healthcare givers and patients. More than 40% of adult blood volume can be lost in just a few minutes, resulting in morbidities and mortality. The authors intend to propose the design of a warning tool for the detection of blood leakage/blood loss during dialysis therapy based on fog computing with an array of photocell sensors and heteroassociative memory (HAM) model. Photocell sensors are arranged in an array on a flexible substrate to detect blood leakage via the resistance changes with illumination in the visible spectrum of 500–700 nm. The HAM model is implemented to design a virtual alarm unit using electricity changes in an embedded system. The proposed warning tool can indicate the risk level in both end-sensing units and remote monitor devices via a wireless network and fog/cloud computing. The animal experimental results (pig blood) will demonstrate the feasibility. PMID:29515815

Analysis of fog effects on terrestrial Free Space optical communication links

KAUST Repository

Esmail, Maged Abdullah

2016-07-26

In this paper, we consider and examine fog measurement data, coming from several locations in Europe and USA, and attempt to derive a unified model for fog attenuation in free space optics (FSO) communication links. We evaluate and compare the performance of our proposed model to that of many well-known alternative models. We found that our proposed model, achieves an average RMSE that outperforms them by more than 9 dB. Furthermore, we have studied the performance of the FSO system using different performance metrics such as signal-to-noise (SNR) ratio, bit error rate (BER), and channel capacity. Our results show that FSO is a short range technology. Therefore, FSO is expected to find its place in future networks that will have small cell size, i.e., <1 km diameter. Moreover, our investigation shows that under dense fog, it is difficult to maintain a communications link because of the high signal attenuation, which requires switching the communications to RF backup. Our results show that increasing the transmitted power will improve the system performance under light fog. However, under heavy fog, the effect is minor. To enhance the system performance under low visibility range, multi-hop link is used which can enhance the power budget by using short segments links. Using 22 dBm transmitted power, we obtained BER=10-3 over 1 km link length with 600 m visibility range which corresponds to light fog. However, under lower visibility range equals 40 m that corresponds to dense fog, we obtained the same BER but over 200 m link length. © 2016 IEEE.

Alternative sanitization methods for minimally processed lettuce in comparison to sodium hypochlorite

Directory of Open Access Journals (Sweden)

Mara Lígia Biazotto Bachelli

2013-09-01

Full Text Available Lettuce is a leafy vegetable widely used in industry for minimally processed products, in which the step of sanitization is the crucial moment for ensuring a safe food for consumption. Chlorinated compounds, mainly sodium hypochlorite, are the most used in Brazil, but the formation of trihalomethanes from this sanitizer is a drawback. Then, the search for alternative methods to sodium hypochlorite has been emerging as a matter of great interest. The suitability of chlorine dioxide (60 mg L-1/10 min, peracetic acid (100 mg L-1/15 min and ozonated water (1.2 mg L-1 /1 min as alternative sanitizers to sodium hypochlorite (150 mg L-1 free chlorine/15 min were evaluated. Minimally processed lettuce washed with tap water for 1 min was used as a control. Microbiological analyses were performed in triplicate, before and after sanitization, and at 3, 6, 9 and 12 days of storage at 2 ± 1 ºC with the product packaged on LDPE bags of 60 µm. It was evaluated total coliforms, Escherichia coli, Salmonella spp., psicrotrophic and mesophilic bacteria, yeasts and molds. All samples of minimally processed lettuce showed absence of E. coli and Salmonella spp. The treatments of chlorine dioxide, peracetic acid and ozonated water promoted reduction of 2.5, 1.1 and 0.7 log cycle, respectively, on count of microbial load of minimally processed product and can be used as substitutes for sodium hypochlorite. These alternative compounds promoted a shelf-life of six days to minimally processed lettuce, while the shelf-life with sodium hypochlorite was 12 days.

Asymmetric ratchet effect for directional transport of fog drops on static and dynamic butterfly wings.

Science.gov (United States)

Liu, Chengcheng; Ju, Jie; Zheng, Yongmei; Jiang, Lei

2014-02-25

Inspired by novel creatures, researchers have developed varieties of fog drop transport systems and made significant contributions to the fields of heat transferring, water collecting, antifogging, and so on. Up to now, most of the efforts in directional fog drop transport have been focused on static surfaces. Considering it is not practical to keep surfaces still all the time in reality, conducting investigations on surfaces that can transport fog drops in both static and dynamic states has become more and more important. Here we report the wings of Morpho deidamia butterflies can directionally transport fog drops in both static and dynamic states. This directional drop transport ability results from the micro/nano ratchet-like structure of butterfly wings: the surface of butterfly wings is composed of overlapped scales, and the scales are covered with porous asymmetric ridges. Influenced by this special structure, fog drops on static wings are transported directionally as a result of the fog drops' asymmetric growth and coalescence. Fog drops on vibrating wings are propelled directionally due to the fog drops' asymmetric dewetting from the wings.

1995 Integrated Monitoring Study: Fog measurements in the Northern San Joaquin Valley - preliminary results

Energy Technology Data Exchange (ETDEWEB)

Collett, J. Jr.; Bator, A.; Sherman, D.E. [Colorado State Univ., Fort Collins, CO (United States)] [and others

1996-12-31

Vertical gradients in fog chemistry and physics were measured from a 430 m television broadcast tower in the northern San Joaquin Valley near Walnut Grove, California. Fog was collected on the ground and at two elevations on the tower using Caltech Active Strand Cloudwater Collectors Version 2 (CASCC2). Work was conducted as part of the 1995 Integrated Monitoring Study (IMS95). Results will be used to evaluate the need to make measurements aloft in future regional studies of fog processing of atmospheric particles and for testing whether vertically resolved fog models provide realistic simulations of fog physics and chemistry above the ground. Two fog/low cloud events were sampled during the tower study. Preliminary results show concentrations of major species in the fogwater typically decreasing with altitude, while liquid water contents increase. Fogwater loadings of major species, the total amount of a species in the aqueous phase per unit air volume, were observed to increase with altitude. Major species concentrations were typically quite stable at a given elevation, while significant decreases were observed over time in liquid water content. Fogwater concentrations of soluble hydroperoxides were highest near the surface and increased with time after sunrise and were observed to coexist in the high pH fog with S(IV). Time lapse video footage of the top of the fog/cloud layer revealed a very dynamic interface, suggesting entrainment of material from the clear air into the fog/cloud may be significant. 12 refs., 7 figs.

The effect of an instant hand sanitizer on blood glucose monitoring results.

Science.gov (United States)

Mahoney, John J; Ellison, John M; Glaeser, Danielle; Price, David

2011-11-01

People with diabetes mellitus are instructed to clean their skin prior to self-monitoring of blood glucose to remove any dirt or food residue that might affect the reading. Alcohol-based hand sanitizers have become popular when soap and water are not available. The aim of this study was to determine whether a hand sanitizer is compatible with glucose meter testing and effective for the removal of exogenous glucose. We enrolled 34 nonfasting subjects [14 male/20 female, mean ages 45 (standard deviation, 9.4)] years, 2 with diagnosed diabetes/32 without known diabetes]. Laboratory personnel prepared four separate fingers on one hand of each subject by (1) cleaning the second finger with soap and water and towel drying (i.e., control finger), (2) cleaning the third finger with an alcohol-based hand sanitizer, (3) coating the fourth finger with cola and allowing it to air dry, and (4) coating the fifth finger with cola and then cleaning it with the instant hand sanitizer after the cola had dried. Finger sticks were performed on each prepared finger and blood glucose was measured. Several in vitro studies were also performed to investigate the effectiveness of the hand sanitizer for removal of exogenous glucose.z Mean blood glucose values from fingers cleaned with instant hand sanitizer did not differ significantly from the control finger (p = .07 and .08, respectively) and resulted in 100% accurate results. Blood glucose data from the fourth (cola-coated) finger were substantially higher on average compared with the other finger conditions, but glucose data from the fifth finger (cola-coated then cleaned with hand sanitizer) was similar to the control finger. The data from in vitro experiments showed that the hand sanitizer did not adversely affect glucose meter results, but when an exogenous glucose interference was present, the effectiveness of the hand sanitizer on glucose bias (range: 6% to 212%) depended on the surface area and degree of dilution. In our study

The Potential for Scaling Up a Fog Collection System on the Eastern Escarpment of Eritrea

Directory of Open Access Journals (Sweden)

Mussie Fessehaye

2015-11-01

Full Text Available Fog is an untapped natural resource. A number of studies have been undertaken to understand its potential as an alternative or complementary water source. In 2007, a pilot fog-collection project was implemented in 2 villages on the Eastern Escarpment of Eritrea. The government of Eritrea, buoyed by the project’s positive results, has encouraged research into and application of fog-collection technologies to alleviate water-supply problems in this region. In 2014, this study was undertaken to assess the coverage, prevalence, intensity, and seasonality of fog on the Eastern Escarpment of Eritrea and consequently to identify potential beneficiary villages. Three independent methods used in the study—satellite image analyses, personal interviews, and a standard fog collector—produced reasonably similar characterizations of fog coverage and timing. The period with high fog incidence is mainly between November and March, with the highest number of fog days per year (96 on the central Eastern Escarpment and decreasing frequency to the south (78 days and north (73 days. The fog intensity on the central Eastern Escarpment is very high and in most cases reduces visibility to less than 500 m. In this period, a light to moderate breeze blows predominantly from the north and northeast. More than half of the villages in the region currently have a reliable water-supply system. The rest depend on seasonal roof-water harvesting, rock-water harvesting, and truck delivery and, therefore, could potentially benefit from fog collection as a supplementary water source. In particular, fog water could be useful for a small number of beneficiaries, including public services like schools and health facilities, where conventional water-delivery systems are not viable.

Summer water use by California coastal prairie grasses: fog, drought, and community composition.

Science.gov (United States)

Corbin, Jeffrey D; Thomsen, Meredith A; Dawson, Todd E; D'Antonio, Carla M

2005-10-01

Plants in the Mediterranean climate region of California typically experience summer drought conditions, but correlations between zones of frequent coastal fog inundation and certain species' distributions suggest that water inputs from fog may influence species composition in coastal habitats. We sampled the stable H and O isotope ratios of water in non-photosynthetic plant tissue from a variety of perennial grass species and soil in four sites in northern California in order to determine the proportion of water deriving from winter rains and fog during the summer. The relationship between H and O stable isotopes from our sample sites fell to the right of the local meteoric water line (LMWL) during the summer drought, providing evidence that evaporation of water from the soil had taken place prior to the uptake of water by vegetation. We developed a novel method to infer the isotope values of water before it was subjected to evaporation in which we used experimental data to calculate the slope of the deltaH versus deltaO line versus the LMWL. After accounting for evaporation, we then used a two-source mixing model to evaluate plant usage of fog water. The model indicated that 28-66% of the water taken up by plants via roots during the summer drought came from fog rather than residual soil water from winter rain. Fog use decreased as distance from the coast increased, and there were significant differences among species in the use of fog. Rather than consistent differences in fog use by species whose distributions are limited to the coast versus those with broader distributions, species responded individualistically to summer fog. We conclude that fogwater inputs can mitigate the summer drought in coastal California for many species, likely giving an advantage to species that can use it over species that cannot.

Numerical simulations of an advection fog event over Shanghai Pudong International Airport with the WRF model

Science.gov (United States)

Lin, Caiyan; Zhang, Zhongfeng; Pu, Zhaoxia; Wang, Fengyun

2017-10-01

A series of numerical simulations is conducted to understand the formation, evolution, and dissipation of an advection fog event over Shanghai Pudong International Airport (ZSPD) with the Weather Research and Forecasting (WRF) model. Using the current operational settings at the Meteorological Center of East China Air Traffic Management Bureau, the WRF model successfully predicts the fog event at ZSPD. Additional numerical experiments are performed to examine the physical processes associated with the fog event. The results indicate that prediction of this particular fog event is sensitive to microphysical schemes for the time of fog dissipation but not for the time of fog onset. The simulated timing of the arrival and dissipation of the fog, as well as the cloud distribution, is substantially sensitive to the planetary boundary layer and radiation (both longwave and shortwave) processes. Moreover, varying forecast lead times also produces different simulation results for the fog event regarding its onset and duration, suggesting a trade-off between more accurate initial conditions and a proper forecast lead time that allows model physical processes to spin up adequately during the fog simulation. The overall outcomes from this study imply that the complexity of physical processes and their interactions within the WRF model during fog evolution and dissipation is a key area of future research.

9 CFR 416.14 - Maintenance of Sanitation SOP's.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maintenance of Sanitation SOP's. 416... ACT SANITATION § 416.14 Maintenance of Sanitation SOP's. Each official establishment shall routinely evaluate the effectiveness of the Sanitation SOP's and the procedures therein in preventing direct...

Centrifugation-Assisted Fog-Collecting Abilities of Metal-Foam Structures with Different Surface Wettabilities.

Science.gov (United States)

Ji, Keju; Zhang, Jun; Chen, Jia; Meng, Guiyun; Ding, Yafei; Dai, Zhendong

2016-04-20

The collection of water from fog is a simple and sustainable means of obtaining freshwater for human and animal consumption. Herein, we address the use of metal foam in fog collection and present a novel fog-collecting device fabricated from copper foam. This device, which can also be used in other liquid-gas separation applications, is a 3D extension of biologically inspired 1D and 2D materials. The network structure of the 3D material effectively increased the contact area and interaction time of the skeleton structure and fog compared to those of traditional 2D fog-collecting materials. The main aspects investigated in this study were the influences of the inertial centrifugal force generated by rotating the metal-foam samples and the use of samples with different surface wettabilities on the fog-collecting performance. Superhydrophilic and superhydrophobic samples were found to have higher collection efficiencies at low and high rotational speeds, respectively, and a maximum efficiency of 86% was achieved for superhydrophobic copper foam (20 pores per inch) rotated at 1500 rpm.

Combinatorial regulation of tissue specification by GATA and FOG factors

Science.gov (United States)

Chlon, Timothy M.; Crispino, John D.

2012-01-01

The development of complex organisms requires the formation of diverse cell types from common stem and progenitor cells. GATA family transcriptional regulators and their dedicated co-factors, termed Friend of GATA (FOG) proteins, control cell fate and differentiation in multiple tissue types from Drosophila to man. FOGs can both facilitate and antagonize GATA factor transcriptional regulation depending on the factor, cell, and even the specific gene target. In this review, we highlight recent studies that have elucidated mechanisms by which FOGs regulate GATA factor function and discuss how these factors use these diverse modes of gene regulation to control cell lineage specification throughout metazoans. PMID:23048181

The effect of medication and the role of postural instability in different components of freezing of gait (FOG).

Science.gov (United States)

Nantel, Julie; Bronte-Stewart, Helen

2014-04-01

Freezing of gait (FOG) is associated with gait asymmetry and arrhythmicity, cognitive impairment in Parkinson's disease (PD). However, the role of postural instability (PI) in and the effect of dopaminergic medication (meds) on FOG are unclear. We investigated the effect of meds on FOG using a validated metric, Stepping in Place (SIP) and the relationship between PI and FOG. We assessed static posturography (off meds), SIP, UPDRS-III (off/on meds) and the FOG-questionnaire (FOG-Q) in 15 freezers/15 non-freezers and 14 healthy controls. UPDRS-III, rigidity, tremor (P FOG-Q was correlated with CoP anteroposterior displacement and mediolateral VCoP (R = 0.42; R = 0.40, P FOG frequency and duration but not of gait asymmetry and arrhythmicity on meds suggests that both dopaminergic and non-dopaminergic networks contribute to FOG. The correlations between postural instability and FOG severity and SIP asymmetry on meds, suggest that as the disease progresses, postural instability interferes with gait symmetry and lead to on meds FOG and falls. Copyright © 2014 Elsevier Ltd. All rights reserved.

Outdoor FSO Communications Under Fog: Attenuation Modeling and Performance Evaluation

KAUST Repository

Esmail, Maged Abdullah

2016-07-18

Fog is considered to be a primary challenge for free space optics (FSO) systems. It may cause attenuation that is up to hundreds of decibels per kilometer. Hence, accurate modeling of fog attenuation will help telecommunication operators to engineer and appropriately manage their networks. In this paper, we examine fog measurement data coming from several locations in Europe and the United States and derive a unified channel attenuation model. Compared with existing attenuation models, our proposed model achieves a minimum of 9 dB, which is lower than the average root-mean-square error (RMSE). Moreover, we have investigated the statistical behavior of the channel and developed a probabilistic model under stochastic fog conditions. Furthermore, we studied the performance of the FSO system addressing various performance metrics, including signal-to-noise ratio (SNR), bit-error rate (BER), and channel capacity. Our results show that in communication environments with frequent fog, FSO is typically a short-range data transmission technology. Therefore, FSO will have its preferred market segment in future wireless fifth-generation/sixth-generation (5G/6G) networks having cell sizes that are lower than a 1-km diameter. Moreover, the results of our modeling and analysis can be applied in determining the switching/thresholding conditions in highly reliable hybrid FSO/radio-frequency (RF) networks.

Evaluation of sanitizers efficiency over spore forming bacteria isolated from whole UHT milk

Directory of Open Access Journals (Sweden)

Edite Andrade Costa

2017-03-01

Full Text Available It is known that sporulated bacteria produce proteolytic and lipolytic thermoresistant enzymes associated with technological problems such as off-flavors, age gelation and bitter taste in milk and dairy products. Preventive measures to avoid contamination of milk must be taken in consideration, e.g., the employment of a certain type of sanitizing agent, its conditions of use, concentration, contact time and temperature. The aim of this work was to evaluate the sanitation efficiency of workers of the dairy industry in relation to sporulated bacteria isolated from UHT milk. The suspension test was used to evaluate the efficiency of solutions of sodium hypocholite, biguanide, peracetic acid and hydrogen peroxide against 18 strains of Bacillus sp. isolated from whole UHT milk. Although the biguanide resulted in significant decimal reduction, none of the sanitizing agents studied was effective under the evaluated conditions. The average decimal reduction values obtained were below 5 log cycles (99.999%. The effectiveness of the sanitizing agent is a primary factor in order to control the contaminations within the dairy industry. Thus, it is essential to define the ideal conditions of use of these agents.

Fog deposition fluxes of water and ions to a mountainous site in Central Europe

OpenAIRE

Klemm, Otto; Wrzesinsky, Thomas

2011-01-01

Fog and precipitation composition and deposition were measured over a 1-yr period. Ion concentrations were higher in fog than in precipitation by factors of between 6 and 18. The causes of these differences were less dilution of fog water due to non-availability of condensable water vapour, and more efficient transfer of surface emissions to fog water as compared to rain water or snow. Fogwater and dissolved ions depositions were measured with eddy covariance in combination with a bulk fogwat...

Translating the human right to water and sanitation into public policy reform.

Science.gov (United States)

Meier, Benjamin Mason; Kayser, Georgia Lyn; Kestenbaum, Jocelyn Getgen; Amjad, Urooj Quezon; Dalcanale, Fernanda; Bartram, Jamie

2014-12-01

The development of a human right to water and sanitation under international law has created an imperative to implement human rights in water and sanitation policy. Through forty-three interviews with informants in international institutions, national governments, and non-governmental organizations, this research examines interpretations of this new human right in global governance, national policy, and local practice. Exploring obstacles to the implementation of rights-based water and sanitation policy, the authors analyze the limitations of translating international human rights into local water and sanitation practice, concluding that system operators, utilities, and management boards remain largely unaffected by the changing public policy landscape for human rights realization. To understand the relevance of human rights standards to water and sanitation practitioners, this article frames a research agenda to ensure that human rights aspirations lead to public policy reforms and public health outcomes.

Fog-Harvesting Properties of Dryopteris marginata: Role of Interscalar Microchannels in Water-Channeling

Directory of Open Access Journals (Sweden)

Vipul Sharma

2018-04-01

Full Text Available Several flora and fauna species found in arid areas have adapted themselves to collect water by developing unique structures and to intake the collected moisture. Apart from the capture of the moisture and fog on the surface, water transport and collection both play an important part in fog-harvesting systems as it prevents the loss of captured water through evaporation and makes the surface available for the capture of water again. Here, we report the remarkable fog collection and water-channeling properties of Dryopteris marginata. The surface of D. marginata has developed an integrated system of multiscale channels so that the water spreads quickly and is transported via these channels very efficiently. These integrated multiscale channels have also been replicated using a facile soft lithography technique to prepare biomimetic surfaces and it has been proved that it is the surface architecture that plays a role in the water transport rather than the material’s properties (waxes present on the surface of the leaves. Based on our studies, we infer that the microlevel hierarchy of the structures make the surface hydrophilic and the multiscale channels allow the efficient passage and transport of water. The understanding of the efficient and well-directed water transport and collection in D. marginata is expected to provide valuable insights to design efficient surfaces for fog-harvesting applications.

Leaching of cell wall components caused by acid deposition on fir needles and trees

Energy Technology Data Exchange (ETDEWEB)

Shigihara, Ado [Department of Material and Life Chemistry, Faculty of Engineering, Kanagawa University, 3-27-1, Rokkakubashi, Kanagawa-ku, Yokohama 221-8686 (Japan)], E-mail: r200670202@kanagawa-u.ac.jp; Matsumoto, Kiyoshi [Department of Material and Life Chemistry, Faculty of Engineering, Kanagawa University, 3-27-1, Rokkakubashi, Kanagawa-ku, Yokohama 221-8686 (Japan); Sakurai, Naoki [Faculty of Integrated Arts and Science, Hiroshima University, 1-7-1, Kagamiyama, Higashi-Hiroshima, 739-8521 (Japan); Igawa, Manabu [Department of Material and Life Chemistry, Faculty of Engineering, Kanagawa University, 3-27-1, Rokkakubashi, Kanagawa-ku, Yokohama 221-8686 (Japan)

2008-07-15

Virgin fir forests have been declining since the 1960s at Mt. Oyama, which is located at the eastern edge of the Tanzawa Mountains and adjacent to the Kanto plain in Japan. An acid fog frequently occurs in the mountains. We collected throughfall and stemflow under fir trees and rainfall every week during January-December 2004 at Mt. Oyama to clarify the influence of acid fog on the decline of fir (Abies firma) needles. In relation to throughfall and stemflow, D-mannose, D-galactose, and D-glucose are the major neutral sugar components; only D-glucose is a major component of rainfall. The correlation coefficient between the total neutral sugars and uronic acid (as D-galacturonic acid), which is a key component of the cross-linking between pectic polysaccharides, was high except for rainfall. The leached amount of calcium ion, neutral sugars, uronic acid, and boron is related to the nitrate ion concentration in throughfall. Results of a laboratory exposure experiment using artificial fog water simulating the average composition of fog water observed at Mt. Oyama (simulated acid fog: SAF) on the fir seedling needles also shows a large leaching of these components from the cell walls of fir needles. The leaching amount increased concomitantly with decreasing pH of the SAF solution. We also observed that a dimeric rhamnogalacturonan II-borate complex (dRG-II-B) that exists in the cell wall as pectic polysaccharide was converted to monomeric RG-II (mRG-II) by the leaching of calcium ion and boron. Results not only of field observations but also those of laboratory experiments indicate a large effect of acid depositions on fir needles.

49 CFR 229.139 - Sanitation, servicing requirements.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Sanitation, servicing requirements. 229.139... Cab Equipment § 229.139 Sanitation, servicing requirements. (a) The sanitation compartment of each... intended such that: (1) All mechanical systems shall function; (2) Water shall be present in sufficient...

46 CFR 131.940 - Marine sanitation device.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Marine sanitation device. 131.940 Section 131.940... Miscellaneous § 131.940 Marine sanitation device. Each vessel with installed toilet facilities must have a marine sanitation device in compliance with 33 CFR part 159. ...

A conceptual model of people's approach to sanitation

International Nuclear Information System (INIS)

Avvannavar, Santosh M.; Mani, Monto

2008-01-01

Sanitation is a term primarily used to characterize the safe and sound handling (and disposal) of human excreta - or simply, people's approach to take-care of their (unavoidable) primal urge. According to the recent Human Development Report 2006 Global access to proper sanitation stands at approximately 58% with 37% being a conservative estimate both for South Asia and Sub-Saharan Africa. Various multi-million dollar sanitation programmes the world over have had little success, often due to inadequate understanding of people's sanitation approach. Sanitation approach includes the perception, feel and practices involved in satisficing the primal need to defecate and urinate (and their disposal). This paper presents a structure to understand the nature of psycho-socio-economic influences that determine societal approach to sanitation. Societies across the globe have evolved imbibing diverse influences attributed to the local environment, religion, cultural practices, war, etc. While a civilization's living environment reflects these influences in their built-environment characteristics, the influences are often deep-rooted and can be traced to the way the community members satisfice their need to defecate and urinate (sanitation approach). The objective of this paper is to trace the various approaches that diverse societies/civilizations, over time, across the world have had towards sanitation, and present a structure to articulate and understand determining factors. Sanitation also involves other domestic (solid and liquid) waste disposal but in the context of this paper the scope of sanitation has been restricted to human excreta alone. The structure presented and discussed in this paper would be useful in understanding a community better in terms of providing appropriate sanitation. It is hoped that this structure be considered as a basis for further refinement and detailed research into each of the factors determining people's sanitation approach

Preventing SQL Injection through Automatic Query Sanitization with ASSIST

Directory of Open Access Journals (Sweden)

Raymond Mui

2010-09-01

Full Text Available Web applications are becoming an essential part of our everyday lives. Many of our activities are dependent on the functionality and security of these applications. As the scale of these applications grows, injection vulnerabilities such as SQL injection are major security challenges for developers today. This paper presents the technique of automatic query sanitization to automatically remove SQL injection vulnerabilities in code. In our technique, a combination of static analysis and program transformation are used to automatically instrument web applications with sanitization code. We have implemented this technique in a tool named ASSIST (Automatic and Static SQL Injection Sanitization Tool for protecting Java-based web applications. Our experimental evaluation showed that our technique is effective against SQL injection vulnerabilities and has a low overhead.

Acidification in fog and cloud water. Die Saeurebildung in Nebel- und Wolkenwasser

Energy Technology Data Exchange (ETDEWEB)

Lammel, G.; Metzig, G. (Kernforschungszentrum Karlsruhe GmbH (Germany, F.R.))

1989-01-01

The understanding of processes leading to acidification of cloud and fogwater is reviewed. The acid content is the result of homogeneous and heterogeneous reactions in the multiphase system as well as of the chemical composition of the aerosol particles. The relevant chemical reactions are evaluated in terms of their acidification potential. Aerosol particles may be incorporated into droplets through acting as condensation nucleus or through scavenging. Methods and results are presented of on-going experimental acivities with the objective of an almost complete characterization of certain fog events. (orig.).

Urbanization Causes Increased Cloud Base Height and Decreased Fog in Coastal Southern California

Science.gov (United States)

Williams, A. Park; Schwartz, Rachel E.; Iacobellis, Sam; Seager, Richard; Cook, Benjamin I.; Still, Christopher J.; Husak, Gregory; Michaelsen, Joel

2015-01-01

Subtropical marine stratus clouds regulate coastal and global climate, but future trends in these clouds are uncertain. In coastal Southern California (CSCA), interannual variations in summer stratus cloud occurrence are spatially coherent across 24 airfields and dictated by positive relationships with stability above the marine boundary layer (MBL) and MBL height. Trends, however, have been spatially variable since records began in the mid-1900s due to differences in nighttime warming. Among CSCA airfields, differences in nighttime warming, but not daytime warming, are strongly and positively related to fraction of nearby urban cover, consistent with an urban heat island effect. Nighttime warming raises the near-surface dew point depression, which lifts the altitude of condensation and cloud base height, thereby reducing fog frequency. Continued urban warming, rising cloud base heights, and associated effects on energy and water balance would profoundly impact ecological and human systems in highly populated and ecologically diverse CSCA.

Inactivation of human norovirus using chemical sanitizers.

Science.gov (United States)

Kingsley, David H; Vincent, Emily M; Meade, Gloria K; Watson, Clytrice L; Fan, Xuetong

2014-02-03

The porcine gastric mucin binding magnetic bead (PGM-MB) assay was used to evaluate the ability of chlorine, chlorine dioxide, peroxyacetic acid, hydrogen peroxide, and trisodium phosphate to inactivate human norovirus within 10% stool filtrate. One-minute free chlorine treatments at concentrations of 33 and 189 ppm reduced virus binding in the PGM-MB assay by 1.48 and 4.14 log₁₀, respectively, suggesting that chlorine is an efficient sanitizer for inactivation of human norovirus (HuNoV). Five minute treatments with 5% trisodium phosphate (pH~12) reduced HuNoV binding by 1.6 log₁₀, suggesting that TSP, or some other high pH buffer, could be used to treat food and food contact surfaces to reduce HuNoV. One minute treatments with 350 ppm chlorine dioxide dissolved in water did not reduce PGM-MB binding, suggesting that the sanitizer may not be suitable for HuNoV inactivation in liquid form. However a 60-min treatment with 350 ppm chlorine dioxide did reduce human norovirus by 2.8 log₁₀, indicating that chlorine dioxide had some, albeit limited, activity against HuNoV. Results also suggest that peroxyacetic acid has limited effectiveness against human norovirus, since 1-min treatments with up to 195 ppm reduced human norovirus binding by chlorine (sodium hypochlorite) as a HuNoV disinfectant wherever possible. Copyright © 2013. Published by Elsevier B.V.

Measurement of moisture in smoldering smoke and implications for fog

Science.gov (United States)

Gary L. Achtemeier

2006-01-01

Smoke from wildland burning in association with fog has been implicated as a visibility hazard over roadways in the southern United States. A project began in 2002 to determine whether moisture released during the smoldering phases of southern prescribed burns could contribute to fog formation. Temperature and relative humidity measurements were taken from 27...

Analysis of fog effects on terrestrial Free Space optical communication links

KAUST Repository

Esmail, Maged Abdullah; Fathallah, Habib; Alouini, Mohamed-Slim

2016-01-01

the transmitted power will improve the system performance under light fog. However, under heavy fog, the effect is minor. To enhance the system performance under low visibility range, multi-hop link is used which can enhance the power budget by using short

Interactions between sanitizers and packaging gas compositions and their effects on the safety and quality of fresh-cut onions (Allium cepa L.).

Science.gov (United States)

Page, Natalie; González-Buesa, Jaime; Ryser, Elliot T; Harte, Janice; Almenar, Eva

2016-02-02

Onions are one of the most widely utilized vegetables worldwide, with demand for fresh-cut onions steadily increasing. Due to heightened safety concerns and consumer demand, the implications of sanitizing and packaging on fresh-cut onion safety and quality need to be better understood. The objective of this study was to investigate the effect of produce sanitizers, in-package atmospheres, and their interactions on the growth of Salmonella Typhimurium, mesophilic aerobic bacteria, yeast and mold, and the physico-chemical quality of diced onions to determine the best sanitizer and in-package atmosphere combination for both safety and quality. Diced onions were inoculated or not with S. Typhimurium, sanitized in sodium hypochlorite, peroxyacetic acid, or liquid chlorine dioxide, and then packaged in either polylactic acid bags containing superatmospheric O2, elevated CO2/reduced O2, or air, or in polyethylene terephthalate snap-fit containers. Throughout 14 days of storage at 7 °C, packaged diced onions were assessed for their safety (S. Typhimurium), and quality (mesophilic aerobic bacteria, yeasts and molds, physico-chemical analyses, and descriptive and consumer acceptance sensory panels). While sanitizer affected (Ppackage atmosphere had a significant (Pinteractions between sanitizer and atmosphere that affected S. Typhimurium and pH were identified whereas 3-way interactions (sanitizer, atmosphere and time) were only observed for headspace CO2. Sodium hypochlorite and elevated CO2/reduced O2 was the best sanitizer and in-package atmosphere combination for enhancing the safety and quality of packaged diced onions. In addition, this combination led to diced onions acceptable for purchase after 2 weeks of storage by trained and consumer panels. Copyright © 2015 Elsevier B.V. All rights reserved.

Sanitizers and Disinfectants Guide. Revised

Science.gov (United States)

Healthy Schools Network, Inc., 2012

2012-01-01

Sanitizers and disinfectants can play an important role in protecting public health. They are designed to kill "pests," including infectious germs and other microorganisms such as bacteria, viruses, and fungi. Unfortunately, sanitizers and disinfectants also contain chemicals that are "pesticides." Exposure to persistent toxic…

Sanitation planning in developing countries

NARCIS (Netherlands)

Kerstens, S.M.

2016-01-01

Sanitation planning in developing countries: Added value of resource recovery

Worldwide 2.5 billion people lack access to sanitation. This impacts human live, the environment and represents a loss of valuable resources that can be regained from wastewater. This study

46 CFR 184.704 - Marine sanitation devices.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Marine sanitation devices. 184.704 Section 184.704... TONS) VESSEL CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 184.704 Marine sanitation devices. A vessel with installed toilet facilities must have a marine sanitation device that complies with...

18 CFR 1304.401 - Marine sanitation devices.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Marine sanitation... Miscellaneous § 1304.401 Marine sanitation devices. No person operating a commercial boat dock permitted under... equipped with a marine sanitation device (MSD) unless such MSD is in compliance with all applicable...

Relation between the size of fog droplets and their contact angles with CR39 surfaces

International Nuclear Information System (INIS)

Grosu, G; Andrzejewski, L; Veilleux, G; Ross, G G

2004-01-01

The formation of fog on CR39 surfaces has been studied. Water droplets form fog coalesce with time, especially during the first 20 s at the beginning of the formation of fog. Consequently, their mean diameter increases. Formation of fog being related to the wettability of the surfaces, the latter has been increased by the implantation of Ar ions into CR39 surfaces under an oxygen partial pressure. A very wetting CR39 surface with advancing (ACA) and receding (RCA) contact angles below 5 deg. has been obtained with an implantation dose of 1.28x10 17 Ar + cm -2 . In this condition, no formation of fog was observed. Characterization using x-ray photoelectron spectroscopy has shown that the molecular structure of CR39 is strongly modified by Ar + implantation, which would be responsible for the increase in wettability. Unfortunately, both ACA and RCA increase with time, which is called ageing, and the formation of fog is again observed. The diameter and concentration of water droplets forming fog have been plotted against the contact angle. These plots show that no formation of fog occurs for ACA 15 He + cm -2 and an energy of 2 keV, sufficient to push the ions deeper than the Ar depth profile, delays the ageing effect in such a way that ACA ≅ 40 deg. is reached after ∼2000 h and no formation of fog is observed during these first ∼2000 h

Stability of nonfouling electroless nickel-polytetrafluoroethylene coatings after exposure to commercial dairy equipment sanitizers.

Science.gov (United States)

Huang, Kang; Goddard, Julie M

2015-09-01

Application of nonfouling coatings on thermal processing equipment can improve operational efficiency. However, to enable effective commercial translation, a need exists for more comprehensive studies on the stability of nonfouling coatings after exposure to different sanitizers. In the current study, the influence of different commercial dairy equipment sanitizers on the nonfouling properties of stainless steel modified with electroless Ni-polytetrafluoroethylene (PTFE) coatings was determined. Surface properties, such as dynamic contact angle, surface energy, surface morphology, and elemental composition, were measured before and after the coupons were exposed to the sanitizers for 168 cleaning cycles. The fouling behavior of Ni-PTFE-modified stainless steel coupons after exposure was also evaluated by processing raw milk on a self-fabricated benchtop-scale plate heat exchanger. The results indicated that peroxide sanitizer had only minor effect on the Ni-PTFE-modified stainless steel surface, whereas chlorine- and iodine-based sanitizers influenced the surface properties drastically. The coupons after 168 cycles of exposure to peroxide sanitizer accumulated the least amount of fouling material (4.44±0.24mg/cm(2)) compared with the coupons exposed to the other 3 sanitizers. These observations indicated that the Ni-PTFE nonfouling coating retained antifouling properties after 168 cycles of exposure to peroxide-based sanitizer, supporting their potential application as nonfouling coatings for stainless steel dairy processing equipment. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A Study of Fog Characteristics using Free-Space Optical Wireless Links

Directory of Open Access Journals (Sweden)

M. S. Awan

2010-06-01

Full Text Available A technique for modeling the fog droplet size distributions using modified gamma distribution has been demonstrated by considering two separate radiation fog events recorded in Graz (Austria and Prague (Czech Republic. The measurement of liquid water content (LWC and the optical attenuations at visible wavelength are used to form equations to obtain the three parameters of the modified gamma distribution i.e., the slope (Λ, the intercept (N0 and the shape parameter (m. Calculated attenuation or LWC from the retrieved parameters are in excellent agreement with attenuation or LWC obtained from the measurement. Hence this method is useful in the study of fog microphysics and in modeling the fog attenuations for terrestrial FSO links in situations when our measurement data contains values of attenuations only, or liquid water content only or both at a particular location. For the two case studies, Graz and Prague, we obtained the DSD parameters Λ=3.547 ± 1.935, N0 =3.834 ± 2.239, m=6.135 ± 2.692 and Λ=5.882 ± 2.889, N0 =13.41 ± 3.875, m=5.288 ± 3.113, respectively. It is evident that the observed behavior of computed modified gamma distribution parameters for Graz and Prague is closely the same and is consistent with the previous literature for the radiation (continental fog. Moreover, we observed the variation of the computed DSD parameters at the different stages of fog (formation, maturity and dissipation phases indicating different microphysical processes at each stage.

C. elegans FOG-3/Tob can either promote or inhibit germline proliferation, depending on gene dosage and genetic context.

Science.gov (United States)

Snow, J J; Lee, M-H; Verheyden, J; Kroll-Conner, P L; Kimble, J

2013-05-23

Vertebrate Tob/BTG proteins inhibit cell proliferation when overexpressed in tissue-culture cells, and they can function as tumor suppressors in mice. The single Caenorhabditis elegans Tob/BTG ortholog, FOG-3, by contrast, was identified from its loss-of-function phenotype as a regulator of sperm fate specification. Here we report that FOG-3 also regulates proliferation in the germline tissue. We first demonstrate that FOG-3 is a positive regulator of germline proliferation. Thus, fog-3 null mutants possess fewer germ cells than normal, a modest but reproducible decrease observed for each of two distinct fog-3 null alleles. A similar decrease also occurred in fog-3/+ heterozygotes, again for both fog-3 alleles, revealing a haplo-insufficient effect on proliferation. Therefore, FOG-3 normally promotes proliferation, and two copies of the fog-3 gene are required for this function. We next overexpressed FOG-3 by removal of FBF, the collective term for FBF-1 and FBF-2, two nearly identical PUF RNA-binding proteins. We find that overexpressed FOG-3 blocks proliferation in fbf-1 fbf-2 mutants; whereas germ cells stop dividing and instead differentiate in fbf-1 fbf-2 double mutants, they continue to proliferate in fog-3; fbf-1 fbf-2 triple mutants. Therefore, like its vertebrate Tob/BTG cousins, overexpressed FOG-3 is 'antiproliferative'. Indeed, some fog-3; fbf-1 fbf-2 mutants possess small tumors, suggesting that FOG-3 can act as a tumor suppressor. Finally, we show that FOG-3 and FBF work together to promote tumor formation in animals carrying oncogenic Notch mutations. A similar effect was not observed when germline tumors were induced by manipulation of other regulators; therefore, this FOG-3 tumor-promoting effect is context dependent. We conclude that FOG-3 can either promote or inhibit proliferation in a manner that is sensitive to both genetic context and gene dosage. The discovery of these FOG-3 effects on proliferation has implications for our understanding of

46 CFR 121.704 - Marine sanitation devices.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Marine sanitation devices. 121.704 Section 121.704... MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 121.704 Marine sanitation devices. A vessel with installed toilet facilities must have a marine sanitation device that complies with 33 CFR part 159. [CGD 85-080...