The Design and Manufacturing of Essential oil Distillation Plant for ...

African Journals Online (AJOL)

The Design and Manufacturing of Essential oil Distillation Plant for rural poverty ... The adaptation of oil distillation technology for essential oil production is ... based on local resources and the first prototype has been manufactured and tested.

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

Energy Technology Data Exchange (ETDEWEB)

Akar, Sertac [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Augustine, Chad R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mann, Margaret K [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-10-04

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparison to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number

Monitoring the effects of atmospheric ethylene near polyethylene manufacturing plants with two sensitive plant species

International Nuclear Information System (INIS)

Tonneijck, A.E.G.; Berge, W.F. ten; Jansen, B.P.

2003-01-01

Atmospheric ethylene from polyethylene manufacturing plants adversely affected the number of flowers and growth of field-grown marigold and petunia. - Data of a multi-year (1977-1983) biomonitoring programme with marigold and petunia around polyethylene manufacturing plants was analysed to assess plant responses to atmospheric ethylene and to determine the area at risk for the phytotoxic effects of this pollutant. In both species, flower formation and growth were severely reduced close to the emission sources and plant performance improved with increasing distance. Plants exposed near the border of the research area had more flowers than the unexposed control while their growth was normal. Measurements of ethylene concentrations at a border site revealed that the growing season mean was 61.5 μg m -3 in 1982 and 15.6 μg m -3 in 1983. In terms of number of flowers, petunia was more sensitive than marigold and adverse effects were observed within ca. 400 m distance from the sources for marigold and within ca. 460 m for petunia. The area at risk (ca. 870 m) for ethylene-induced growth reduction was also limited to the industrial zone. Plants were more sensitive to ethylene in terms of growth reduction than in terms of inhibition of flowering. In the Netherlands, maximum permissible levels of ethylene are currently based on information from laboratory and greenhouse studies. Our results indicate that these levels are rather conservative in protecting field-grown plants against ethylene-induced injury near polyethylene manufacturing plants

Chalon/Saint-Marcel manufacturing plant; L'usine de Chalon/Saint-Marcel

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

AREVA is the world leader in the design and construction of nuclear power plants, the manufacture of heavy components, and the supply of nuclear fuel and nuclear services such as maintenance and inspection. The Equipment Division provides the widest range of nuclear components and equipment, manufactured at its two facilities in Jeumont, northern France, and St. Marcel, in Burgundy. The St. Marcel plant, set on 35 ha (87.5 acres) near Chalon-sur-Saone, was established in 1973 in a region with a long history of specialized metalworking and mechanical activities to meet the demand for non-military nuclear requirements in France. The site offers two advantages: - excellent facilities for loading and transporting heavy components on the Saone river, - it's proximity to other group sites. Since its completion in 1975, the Chalon/St. Marcel facility has manufactured all the heavy components for French pressurized water reactors (PWRs) ranging from 900 MW to 1500 MW. It has also completed a significant number of export contracts that have made AREVA world leader. Nearly 600 heavy components (reactor vessels, steam generators, pressurizers and closure heads) have been manufactured or are currently being manufactured since the plant opened in 1975. The plant is at the heart of the manufacturing chain for nuclear steam supply systems (NSSS) supplied by AREVA. On the basis of engineering data, the plant manufactures reactor vessels, reactor vessel internals, steam generators, pressurizers and related components such as accumulators, auxiliary heat exchangers and supporting elements. Vessel upper internals Other similar components such as reactor vessels for boiling water reactors (BWR) or high temperature reactors (HTR) and other types of steam generators can also be manufactured in the plant (for example Once Through Steam Generators - OTSG). The basic activities performed at Chalon/St. Marcel are metalworking and heavy machining. These activities are carried out in

Monitoring the effects of atmospheric ethylene near polyethylene manufacturing plants with two sensitive plant species

Energy Technology Data Exchange (ETDEWEB)

Tonneijck, A.E.G.; Berge, W.F. ten; Jansen, B.P

2003-05-01

Atmospheric ethylene from polyethylene manufacturing plants adversely affected the number of flowers and growth of field-grown marigold and petunia. - Data of a multi-year (1977-1983) biomonitoring programme with marigold and petunia around polyethylene manufacturing plants was analysed to assess plant responses to atmospheric ethylene and to determine the area at risk for the phytotoxic effects of this pollutant. In both species, flower formation and growth were severely reduced close to the emission sources and plant performance improved with increasing distance. Plants exposed near the border of the research area had more flowers than the unexposed control while their growth was normal. Measurements of ethylene concentrations at a border site revealed that the growing season mean was 61.5 {mu}g m{sup -3} in 1982 and 15.6 {mu}g m{sup -3} in 1983. In terms of number of flowers, petunia was more sensitive than marigold and adverse effects were observed within ca. 400 m distance from the sources for marigold and within ca. 460 m for petunia. The area at risk (ca. 870 m) for ethylene-induced growth reduction was also limited to the industrial zone. Plants were more sensitive to ethylene in terms of growth reduction than in terms of inhibition of flowering. In the Netherlands, maximum permissible levels of ethylene are currently based on information from laboratory and greenhouse studies. Our results indicate that these levels are rather conservative in protecting field-grown plants against ethylene-induced injury near polyethylene manufacturing plants.

MANUFACTURING AND CONTINUOUS IMPROVEMENT PERFORMANCE LEVEL IN PLANTS OF MEXICO; A COMPARATIVE ANALYSIS AMONG LARGE AND MEDIUM SIZE PLANTS

OpenAIRE

Carlos Monge; Jesús Cruz

2015-01-01

A random and statistically significant sample of 40 medium (12) and large (28) manufacturing plants of Apodaca, Mexico were surveyed using a structured and validated questionnaire to investigate the level of implementation of lean manufacturing, sustainable manufacturing, continuous improvement and operational efficiency and environmental responsibility in them, it is important to mention it was found that performance in the mentioned philosophies, on the two categories of plants is low, howe...

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines: Preprint

Energy Technology Data Exchange (ETDEWEB)

Akar, Sertac [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Augustine, Chad R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mann, Margaret K [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-03

The global geothermal electricity market has significantly grown over the last decade and is expected to reach a total installed capacity of 18.4 GWe in 2021 (GEA, 2016). Currently, geothermal project developers customize the size of the power plant to fit the resource being developed. In particular, the turbine is designed and sized to optimize efficiency and resource utilization for electricity production; most often, other power plant components are then chosen to complement the turbine design. These custom turbine designs demand one-off manufacturing processes, which result in higher manufacturing setup costs, longer lead-times, and higher capital costs overall in comparison to larger-volume line manufacturing processes. In contrast, turbines produced in standard increments, manufactured in larger volumes, could result in lower costs per turbine. This study focuses on analysis of the global supply chain and manufacturing costs for Organic Rankine Cycle (ORC) turboexpanders and steam turbines used in geothermal power plants. In this study, we developed a manufacturing cost model to identify requirements for equipment, facilities, raw materials, and labor. We analyzed three different cases 1) 1 MWe geothermal ORC turboexpander 2) 5 MWe ORC turboexpander and 3) 20 MWe geothermal steam turbine, and calculated the cost of manufacturing the major components, such as the impellers/blades, shaft/rotor, nozzles, inlet guide lanes, disks, and casings. Then we used discounted cash flow (DCF) analysis to calculate the minimum sustainable price (MSP). MSP is the minimum price that a company must sell its product for in order to pay back the capital and operating expenses during the plant lifetime (CEMAC, 2017). The results showed that MSP could highly vary between 893 dollar/kW and 30 dollar/kW based on turbine size, standardization and volume of manufacturing. The analysis also showed that the economy of scale applies both to the size of the turbine and the number

Investigating factors that influence level and dynamics of capital productivity in plants manufacturing equipment for mines

Energy Technology Data Exchange (ETDEWEB)

Karenov, R.S. (Karagandinskii Politekhnicheskii Institut (USSR))

1990-10-01

Analyzes productivity of capital in plants manufacturing equipment for underground coal mining in the USSR. Effects of the following factors are evaluated: working time, investment, mechanization of manufacturing processes, power of motors used to drive the manufacturing equipment, duration of a manufacturing cycle, cooperation degree, equipment service life. Effects of insufficient specialization of manufacturing plants and the manufacturing of mining equipment by repair shops of individual mines which should rather specialize in equipment repair and maintenance are evaluated. Analysis shows that specialization of the manufacturing plants could increase productivity of capital by 1.5-2.0 times, reduce labor consumption by 3-5 times and consumption of materials by 1.5-1.7 times. 4 refs.

Exergetic performance analysis of an ice-cream manufacturing plant: A comprehensive survey

International Nuclear Information System (INIS)

Dowlati, Majid; Aghbashlo, Mortaza; Mojarab Soufiyan, Mohamad

2017-01-01

In this study, a comprehensive exergetic performance analysis of an ice-cream manufacturing plant was conducted in order to pinpoint the locations of thermodynamic inefficiencies. Exergetic performance parameters of each subunit of the plant were determined and illustrated individually through writing and solving energy and exergy balance equations on the basis of real operational data. The required data were acquired from a local ice-cream factory located in Tehran, Iran. The plant included three main subsystems including water steam generator, refrigeration system, and ice-cream production line. An attempt was also made to quantify the specific exergy destruction of the ice-cream manufacturing process. The functional exergetic efficiency of the water steam generator, refrigeration system, and ice-cream production line was determined at 17.45%, 25.52%, and 5.71%, respectively. The overall functional exergetic efficiency of the process was found to be 2.15%, while the specific exergy destruction was calculated as 719.80 kJ/kg. In general, exergy analysis and its derivatives could provide invaluable information over the conventional energy analysis, suggesting potential locations for the plant performance improvement. - Highlights: • An ice-cream manufacturing plant was exergetically analyzed using the actual data. • Water steaming unit had the highest irreversibility rate among the plant subunits. • The specific exergy destruction of the ice-cream manufacturing was 719.80 kJ/kg. • The overall process exergetic efficiency of the process was found to be 2.15%.

Monitoring the effects of atmospheric ethylene near polyethylene manufacturing plants with two sensitive plant species

NARCIS (Netherlands)

Tonneijck, A.E.G.; Berge, ten W.F.; Jansen, B.P.

2003-01-01

Data of a multi-year (1977-1983) biomonitoring programme with marigold and petunia around polyethylene manufacturing plants was analysed to assess plant responses to atmospheric ethylene and to determine the area at risk for the phytotoxic effects of this pollutant. In both species, flower formation

Job Creation, Job Destruction and Plant Turnover in Norwegian Manufacturing

OpenAIRE

Tor Jakob Klette; Astrid Mathiassen

1995-01-01

The labour market in Norway, as in other Scandinavian countries, is often claimed to be overregulated and incapable of adjustment to changes in job opportunities. The results presented in this paper suggest to the contrary that in terms of job creation and job reallocation between plants, the manufacturing sector in Norway is surprisingly flexible, and similar to the manufacturing sector in other OECD countries such as the U.S. We show that 8.4 percent of the manufacturing jobs are eliminated...

Modelling energy consumption in a manufacturing plant using productivity KPIs

Energy Technology Data Exchange (ETDEWEB)

Gallachoir, Brian O.; Cahill, Caiman (Sustainable Energy Research Group, Dept. of Civil and Environmental Engineering, Univ. College Cork (Ireland))

2009-07-01

Energy efficiency initiatives in industrial plants are often focused on getting energy-consuming utilities and devices to operate more efficiently, or on conserving energy. While such device-oriented energy efficiency measures can achieve considerable savings, greater energy efficiency improvement may be achieved by improving the overall productivity and quality of manufacturing processes. The paper highlights the observed relationship between productivity and energy efficiency using aggregated data on unit consumption and production index data for Irish industry. Past studies have developed simple top-down models of final energy consumption in manufacturing plants using energy consumption and production output figures, but these models do not help identify opportunities for energy savings that could achieved through increased productivity. This paper proposes an improved and innovative method of modelling plant final energy demand that introduces standard productivity Key Performance Indicators (KPIs) into the model. The model demonstrates the relationship between energy consumption and productivity, and uses standard productivity metrics to identify the areas of manufacturing activity that offer the most potential for improved energy efficiency. The model provides a means of comparing the effect of device-oriented energy efficiency measures with the potential for improved energy efficiency through increased productivity.

LEU fuel element produced by the Egyptian fuel manufacturing pilot plant

International Nuclear Information System (INIS)

Zidan, W.I.

2000-01-01

The Egyptian Fuel Manufacturing Pilot Plant, FMPP, is a Material Testing Reactor type (MTR) fuel element facility, for producing the specified fuel elements required for the Egyptian Second Research Reactor, ETRR-2. The plant uses uranium hexafluoride (UF 6 , 19.75% U 235 by wt) as a raw material which is processed through a series of the manufacturing, inspection and test plan to produce the final specified fuel elements. Radiological safety aspects during design, construction, operation, and all reasonably accepted steps should be taken to prevent or reduce the chance of accidents occurrence. (author)

Manufacturing network evolution

DEFF Research Database (Denmark)

Yang, Cheng; Farooq, Sami; Johansen, John

2011-01-01

Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

Quality assurance in the manufacture of items for nuclear power plants

International Nuclear Information System (INIS)

1981-01-01

This Safety Guide provides requirements and recommendations related to the establishment and implementation of a quality assurance programme for those organizations involved in the manufacture of items affecting the safety of nuclear power plants. The quality-assurance-related functions of a manufacturer may include activities such as designing, purchasing, fabricating, handling, shipping, storing, cleaning, inspecting, testing, modifying, repairing and maintaining. It is not the aim of the present Guide, which supplements the above-mentioned Code of Practice, to provide rules related to the quality assurance programme for the design of items. Manufacturers that generate designs shall follow the requirements and recommendations contained in the Safety Guide on Quality Assurance in the Design of Nuclear Power Plants (IAEA Safety Series No. 50-SG-QA6). All these publications form part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to land-based stationary thermal neutron power plants. A Provisional List of NUSS Programme Titles will be found at the end of this publication

A feasible approach to implement a commercial scale CANDU fuel manufacturing plant in Egypt

International Nuclear Information System (INIS)

El-Shehawy, I.; El-Sharaky, M.; Yasso, K.; Selim, I.; Graham, N.; Newington, D.

1995-01-01

Many planning scenarios have been examined to assess and evaluate the economic estimates for implementing a commercial scale CANDU fuel manufacturing plant in Egypt. The cost estimates indicated strong influence of the annual capital costs on total fuel manufacturing cost; this is particularly evident in a small initial plant where the proposed design output is only sufficient to supply reload fuel for a single CANDU-6 reactor. A modular approach is investigated as a possible way, to reduce the capital costs for a small initial fuel plant. In this approach the plant would do fuel assembly operations only and the remainder of a plant would be constructed and equipped in the stages when high production volumes can justify the capital expenses. Such approach seems economically feasible for implementing a small scale CANDU fuel manufacturing plant in developing countries such as Egypt and further improvement could be achieved over the years of operation. (author)

27 CFR 19.206 - Curtailment and extension of plant premises for the manufacture of eligible flavors.

Science.gov (United States)

2010-04-01

... of plant premises for the manufacture of eligible flavors. 19.206 Section 19.206 Alcohol, Tobacco... and extension of plant premises for the manufacture of eligible flavors. (a) General. The premises of... permit the use of the facilities for the manufacture of eligible flavors. (b) Qualifying documents. When...

In vivo polymerization and manufacturing of wires and supercapacitors in plants

Science.gov (United States)

Stavrinidou, Eleni; Nilsson, K. Peter R.; Singh, Sandeep Kumar; Franco-Gonzalez, Juan Felipe; Volkov, Anton V.; Jonsson, Magnus P.; Grimoldi, Andrea; Elgland, Mathias; Zozoulenko, Igor V.; Berggren, Magnus

2017-01-01

Electronic plants, e-Plants, are an organic bioelectronic platform that allows electronic interfacing with plants. Recently we have demonstrated plants with augmented electronic functionality. Using the vascular system and organs of a plant, we manufactured organic electronic devices and circuits in vivo, leveraging the internal structure and physiology of the plant as the template, and an integral part of the devices. However, this electronic functionality was only achieved in localized regions, whereas new electronic materials that could be distributed to every part of the plant would provide versatility in device and circuit fabrication and create possibilities for new device concepts. Here we report the synthesis of such a conjugated oligomer that can be distributed and form longer oligomers and polymer in every part of the xylem vascular tissue of a Rosa floribunda cutting, forming long-range conducting wires. The plant’s structure acts as a physical template, whereas the plant’s biochemical response mechanism acts as the catalyst for polymerization. In addition, the oligomer can cross through the veins and enter the apoplastic space in the leaves. Finally, using the plant’s natural architecture we manufacture supercapacitors along the stem. Our results are preludes to autonomous energy systems integrated within plants and distribute interconnected sensor–actuator systems for plant control and optimization. PMID:28242683

A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant

Directory of Open Access Journals (Sweden)

Rishi J. P.

2018-01-01

Full Text Available Lean Manufacturing is a way to deal with the elimination of waste through persistent change within the system. The assembling units in India should likewise hope to take its preferences. The Industries are energetically following the Lean assembling strategies to reduce waste and cost. The present work is the study of a manufacturing process for axle housing and to decide how Lean manufacturing process carried out for axle housing plant to improve productivity. The new shot peening machine was installed in a heat treatment plant of a housing line in an automobile rear axle assembly plant and material handling time from storage to this new machine was more and this increased lead time subsequently. To reduce this Kaizens technique was employed and a direct gravity conveyor was chosen and installed between two work stations and the part was directly fed to the new machine installed and this reduces the material handling time considerably. A cost analysis was done to realize the benefits of implementing this lean technique. Therefore reducing lead time and increasing productivity is the Prime benefits of lean manufacturing practices like lean assembly.

Creativity Support to Improve Health-and-Safety in Manu-facturing Plants: Demonstrating Everyday Creativity

OpenAIRE

Zachos, K.; Maiden, N.; Levis, S.

2015-01-01

This paper reports the development and deployment of digi-tal support for human creativity in a domain outside of the creative industries -- health-and-safety management in man-ufacturing plants. It reports applied research to extend a risk detection and resolution process at a world-class manufac-turing plant that produces tractors with creativity techniques and new digital support for the plant employees to use these techniques effectively as part of the risk detection and reso-lution proce...

Salicylic acid-independent plant defence pathways

OpenAIRE

Pieterse, C.M.J.; Loon, L.C. van

1999-01-01

Salicylic acid is an important signalling molecule involved in both locally and systemically induced disease resistance responses. Recent advances in our understanding of plant defence signalling have revealed that plants employ a network of signal transduction pathways, some of which are independent of salicylic acid. Evidence is emerging that jasmonic acid and ethylene play key roles in these salicylic acid-independent pathways. Cross-talk between the salicylic acid-dependent and the salicy...

The application of welding technology in power plant manufacture

International Nuclear Information System (INIS)

Price, A.T.; Chew, B.

1989-02-01

A strategy is presented for the application of welding technology in the manufacture of power plant. A flow chart description is adopted in the present paper to provide a general framework outlining the sequence of activities leading to manufacture. The broad chronological order of events is treated under the three headings, Component Design, Welding Development, and Implementation. Important factors that have to be considered at each of these stages are shown in subsidiary flow charts together with short notes to provide context and an aide memoire for those involved in welding technology. (author)

Interplant coordination, supply chain integration, and operational performance of a plant in a manufacturing network

DEFF Research Database (Denmark)

Yang, Cheng; Chaudhuri, Atanu; Farooq, Sami

2016-01-01

Purpose The objective of this paper is to investigate the relationships at the level of plant in a manufacturing network, labelled as networked plant in the paper, between (1) inter-plant coordination and operational performance, (2) supply chain integration (SCI) and operational performance......, and (3) inter-plant coordination and SCI. Design/methodology/approach This paper is developed based on the data obtained from the sixth version of International Manufacturing Strategy Survey (IMSS VI). Specifically, this paper uses a subset of the IMSS VI data set from the 606 plants that identified...

The logistics and the supply chain in the Juzbado Nuclear Fuel Manufacturing Plant

International Nuclear Information System (INIS)

2005-01-01

The paper describe the logistics and the supply chain in the Juzbado Nuclear Fuel Manufacturing Plant, located in Juzbado in the province of Salamanca. In the the article are described the principal elements in the supply chain and the difficulties of its management derived from the short period for the manufacturing of the nuclear fuel. It's also given a view in relation to the transportation by land sea of the nuclear components, uranium oxide powder and the manufactured fuel. The characteristics of the supply chain are determined by the plant production forecast, by the origin and high technology of the raw materials and by nuclear fuel delivery site locations. (Author)

Surrogate Plant Data Base : Volume 4. Appendix E : Medium and Heavy Truck Manufacturing

Science.gov (United States)

1983-05-01

This four volume report consists of a data base describing "surrogate" automobile and truck manufacturing plants developed as part of a methodology for evaluating capital investment requirements in new manufacturing facilities to build new fleets of ...

Queensland Mines plant trials with Caro's acid

International Nuclear Information System (INIS)

Lucas, G.C.; Fulton, E.J.; Vautier, F.E.; Waters, D.J.; Ring, R.J.

1983-01-01

Laboratory leach tests have been carried out to compare the effectiveness of Caro's acid (permonosulphuric acid) as an alternative oxidant to pyrolusite in the leaching of uranium ores. Results demonstrated that Caro's acid reduced acid consumption in leaching and the time required for neutralisation of tailings liquor. The uranium extraction was unaffected by choice of oxidant. A plant trial confirmed that significant savings in acid and lime usage can be achieved under plant conditions. Plant operations also demonstrated that Caro's acid has a number of significant operating advantages over pyrolusite. Queensland Mines Ltd. have recently decided to convert their leaching process from pyrolusite to Caro's acid

Manufacture of piping components for nuclear power plants

International Nuclear Information System (INIS)

Bartecek, R.

1983-01-01

Hammer forging of hollow forging ingots, extrusion and elestroslag remelting may be used for the manufacture of large pipes. Technologies have been developed for the manufacture of elbows based on various types of forming. These procedures mainly include the hydraulic pressing of elbows from tubes and the pressing of symmetrical halves of elbows with subsequent welding. The hammer forging of valves, cross pieces, etc., has been replaced by forging and pressing. In order to prevent failures from occurring in the pipes during operation of nuclear power plants, pipes are being made of larger forgings, which reduces the number of welds. This improves the quality of the pipes, reduces production and assembly costs and is metal-saving. (E.S.)

The Design and Manufacturing of Essential oil Distillation Plant for ...

African Journals Online (AJOL)

Choice-Academy

The paper presents economic value of the design and manufacturing of essential oil production plant ... system with the required precision for standard quality of oil at affordable cost. Thus, the ..... still, steam injection and distribution systems,.

Verification of criticality Safety for ETRR-2 Fuel Manufacturing pilot Plant (FMPP) at Inshas

International Nuclear Information System (INIS)

Aziz, M.; Gadalla, A.A.; Orabi, G.

2006-01-01

The criticality safety of the fuel manufacturing pilot plant (FMPP) at inshas is studied and analyzed during normal and abnormal operation conditions. the multiplication factor during all stages of the manufacturing processes is determined. several accident scenarios were simulated and the criticality of these accidents were investigated. two codes are used in the analysis : MCNP 4 B code, based on monte Carlo method, and CITATION code , based on diffusion theory. the results are compared with the designer calculations and satisfactory agreement were found. the results of the study indicated that the safety of the fuel manufacturing pilot plant is confirmed

Energy, economy, and environment analysis and optimization on manufacturing plant energy supply system

International Nuclear Information System (INIS)

Feng, Lujia; Mears, Laine; Beaufort, Cleveland; Schulte, Joerg

2016-01-01

Highlights: • Single objective and multicriteria optimization approaches are proposed. • Objectives of energy, economy, and environment are proved conflicting. • 3-input-5-output energy supply system of an automotive plant is studied. - Abstract: Increasing attention has recently been drawn to energy consumption in manufacturing plants. Facing the challenges from reducing emissions coupled with rising raw material prices and energy costs, manufacturers are trying to balance the energy usage strategy among the total energy consumption, economy, and environment, which can be self-conflicting at times. In this paper, energy systems in manufacturing environments are reviewed, and the current status of onsite energy system and renewable energy usage are discussed. Single objective and multicriteria optimization approaches are effectively formulated for making the best use of energy delivered to the production processes. Energy supply operation suggestions based on the optimization results are obtained. Finally, an example from an automotive assembly manufacturer is described to demonstrate the energy usage in the current manufacturing plants and how the optimization approaches can be applied to satisfy the energy management objectives. According to the optimization results, in an energy oriented operation, it takes 35% more in monetary cost; while in an economy oriented operation, it takes 17% more in megawatt hour energy supply and tends to rely more on the inexpensive renewable energy.

Small manufacturing plants, pollution, and poverty : new evidence from Brazil and Mexico

OpenAIRE

Dasgupta, Susmita; Lucas, Robert E. B.; Wheeler, David

1998-01-01

The authors use new data from Brazil and Mexico to analyze relationships linking economic development, the size distribution of manufacturing plants, and exposure to industrial pollution. For lack of data, prior work in this field has been limited largely to water pollution and medium-size plants. This study examines air pollution and encompasses small plants (with 1 to 20 employees) as well as medium-size and large plants. Four main questions are addressed (with answers from plant-level data...

Configuration Method Design for Reconfigurable Manufacturing System with the aid of Plant Simulation

DEFF Research Database (Denmark)

Li, Yang; Zhang, Shuai; Bilberg, Arne

2014-01-01

A new Reconfigurable Manufacturing System structure has been recently designed by a large consumer goods manufacturer in Europe, aiming to balance the performance of productivity and flexibility. This article shows an exploratory research on the (re)configuration procedure of the new RMS structure....... Following the procedure which is designed in this paper, the (re)configuration of RMS can be managed as part of the daily operation with the help of computer simulation. Keywords: Plant Simulation, Tecnomatix, Reconfigurable Manufacturing System, modular manufacturing....

Biotechnological applications for rosmarinic acid production in plant ...

African Journals Online (AJOL)

Biotechnological applications for rosmarinic acid production in plant. ... rosmarinic acid in medicinal plants, herbs and spices has beneficial and health promoting ... of rosmarinic acid starts with the amino acids phenylalanine and tyrosine.

2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering

CERN Document Server

2017-01-01

This volume presents selected papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2016) which was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia. The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors. It discusses the findings of experimental and numerical works from soldering, arc welding to solid state joining technology that faced by current industry. .

Localization of Manufacturing Capabilities in Setting Up Nuclear Power Plants

International Nuclear Information System (INIS)

Chadda, Sushil Kumar

2011-01-01

Nuclear renaissance is now imminent and is inevitable in view of rapidly increasing global warming concerns. A steep shift towards environmentally benign sources of energy remains an unavoidable choice as continents are warming up pushing seas into human habitation and disturbing global ecology. Accordingly, Indian government in its integrated energy policy document has planned for raising nuclear power capacity to generate 63 GWe by 2030. This envisages estimated investments of US$22 billion in the next 15 to 20 years. Setting up of nuclear energy generation capacity, however, remains a painstakingly slow process primarily due to complex, multidisciplinary efforts required to crank up a reactor. A robust supply chain remains key to expediting this process. In the light of this, it is critically important to ensure supply-chain for materials and components and putting in place cost effective project management to complete the projects on time and within the budgets. In this context, the participation of industries and their preparedness to meet the challenges are necessary. This would also require investments towards up gradation of manufacturing technology, training of manpower and mobilization of resources at the construction site. The industry would also need to enhance detailing and design engineering capabilities for the plants. It is only when such capabilities have been brought up that the possibilities of time-bound setting up of nuclear plants can be realized. In this paper, various issues with regard to project cost, regulatory and licensing, technology and gestation period etc for new build plants relevant to manufacturing industry are discussed. The plans for enhancing manufacturing capabilities for the critical path items of the project schedule with viable business, ensuring returns to stakeholders and financing and investment cycle are brought out. The various steps and initiatives being taken by Bharat Forge Ltd, the flagship company of Kalyani

Importance of wood from planted forests for manufacturing industry

Directory of Open Access Journals (Sweden)

Victor Almeida De Araujo

2017-06-01

Full Text Available The manufactured wood products are essential to modern society, since they are made from renewable and recyclable raw material, characterizing a sustainable input. The objective of this study was to elucidate the importance of wood from planted forests in forest products manufacture of higher added value, addressing forest and wood contexts of topics related to education, resources, products, industry, government incentives, public policies and markets. Different from Europe, it was verified that Brazil does not support positively this important industrial sector, nevertheless it still presents growth potential due to range of wooden-based products. Thus, wood could reach a prominent position in Brazilian economy, if strategies and incentives were defined by rules and public policies..

Innovation and Job Creation in a Small Open Economy Evidence from Norwegian Manufacturing Plants 1982-92

OpenAIRE

Tor Jakob Klette; Svein Erik Førre

1995-01-01

It is often claimed that the opportunities to create new manufacturing jobs in open, high-cost economies such as Norway, are concentrated in products which are technologically advanced and knowledge intensive. This paper examines the relationship between job creation and innovation, as measured by R&D investments, in Norwegian manufacturing. We compare job creation in plants belonging to R&D firms to plants belonging to firms without R&D. We also compare job creation in plants belonging to hi...

Progress and prospects for phosphoric acid fuel cell power plants

Energy Technology Data Exchange (ETDEWEB)

Bonville, L.J.; Scheffler, G.W.; Smith, M.J. [International Fuel Cells Corp., South Windsor, CT (United States)

1996-12-31

International Fuel Cells (IFC) has developed the fuel cell power plant as a new, on-site power generation source. IFC`s commercial fuel cell product is the 200-kW PC25{trademark} power plant. To date over 100 PC25 units have been manufactured. Fleet operating time is in excess of one million hours. Individual units of the initial power plant model, the PC25 A, have operated for more than 30,000 hours. The first model {open_quotes}C{close_quotes} power plant has over 10,000 hours of operation. The manufacturing, application and operation of this power plant fleet has established a firm base for design and technology development in terms of a clear understanding of the requirements for power plant reliability and durability. This fleet provides the benchmark against which power plant improvements must be measured.

MOX manufacturing perspectives in a fast growing future and the MELOX plant

International Nuclear Information System (INIS)

Bekiarian, A.; Le Bastard, G.

1991-01-01

The potential MOX fuel market will grow regularly in the nineties. In view of satisfying the needs of the market, mixed-oxide fuel manufacturers have a strong incentive to increase the capacity of existing facilities and to build new ones. The Belgonucleaire plant at Dessel has been in operation since 1973. It has been backfitted up to a capacity of 35 t/y of LWR fuel which is now fully available. To satisfy the need of MOX fuel it was equally decided to adapt facilities in Cadarache where a production line, with a capacity of 15 t/y, is now delivering its production. But planned production up to the end of the century implies further increases in manufacturing capacities : MELOX, a plant for 120 t/y is under construction on the COGEMA site of Marcoule as well as a further expansion of Belgonucleaire plant at Dessel (P1) is studied to reach 70 t/y on this site. Similar developments are also planned by SIEMENS for a new manufacturing capability at Hanau (Germany). MELOX as well as all the new facilities have to get high levels of safety concerning environment and personnel. This leads to largely automated operations, and a particular care for waste treatment. (author)

Method for production of petroselinic acid and OMEGA12 hexadecanoic acid in transgenic plants

Science.gov (United States)

Ohlrogge, John B.; Cahoon, Edgar B.; Shanklin, John; Somerville, Christopher R.

1995-01-01

The present invention relates to a process for producing lipids containing the fatty acid petroselinic acid in plants. The production of petroselinic acid is accomplished by genetically transforming plants which do not normally accumulate petroselinic acid with a gene for a .omega.12 desaturase from another species which does normally accumulate petroselinic acid.

World wide IFC phosphoric acid fuel cell implementation

Energy Technology Data Exchange (ETDEWEB)

King, J.M. Jr

1996-04-01

International Fuel Cells, a subsidary of United technologies Corporation, is engaged in research and development of all types of fuel cell technologies and currently manufactures alkaline fuel cell power plants for the U.S. manned space flight program and natural gas fueled stationary power plants using phosphoric acid fuel cells. This paper describes the phosphoric acid fuel cell power plants.

Safety aspects of the FMPP (Fuel Manufacturing Pilot Plant) setup constructed by INVAP in the Arabic Republic of Egypt; Aspectos de seguridad en la puesta en marcha de la FMPP (Fuel Manufacturing Pilot Plant) construida por INVAP en la Republica Arabe de Egipto

Energy Technology Data Exchange (ETDEWEB)

Cinat, Enrique; Boero, Norma L [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Combustibles Nucleares

1999-07-01

The FMPP is a fuel plates manufacturing plant for test reactors. This facility was designed, constructed in El Cairo and turned-key handled by INVAP SE to the Arabian Republic of Egypt. In this project, CNEA participated in the transference of technology, elaboration of documents, training of Egyptian personnel and technical services during the setup of the facility in El Cairo. These tasks were undertaken by UPMP (Uranium Powder Manufacturing Plant) and ECRI (Research Reactors Fuel Elements Plant) personnel. Both plants in CNEA served as a FMPP design basis. During the setup of the facility a fuel element with natural uranium was firstly manufactured and then another one using uranium with 20% enrichment. In this paper the responses of the system regarding safety, after finishing the first two stages of manufacturing, are analyzed and evaluated. (author)

40 CFR 417.30 - Applicability; description of the soap manufacturing by fatty acid neutralization subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the soap... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING POINT SOURCE CATEGORY Soap Manufacturing by Fatty Acid Neutralization Subcategory § 417.30 Applicability...

The Design and Manufacturing of Essential oil Distillation Plant for ...

African Journals Online (AJOL)

Choice-Academy

industry in the country do not have the capacity to manufacture the complete distillation plant system with the required precision for standard quality of oil at affordable cost. Thus, the design and the experiment in the use of a prototype small size distillation unit showed that the technology is appropriate for essential oil ...

Safety aspects of the FMPP (Fuel Manufacturing Pilot Plant) setup constructed by INVAP in the Arabic Republic of Egypt

International Nuclear Information System (INIS)

Cinat, Enrique; Boero, Norma L.

1999-01-01

The FMPP is a fuel plates manufacturing plant for test reactors. This facility was designed, constructed in El Cairo and turned-key handled by INVAP SE to the Arabian Republic of Egypt. In this project, CNEA participated in the transference of technology, elaboration of documents, training of Egyptian personnel and technical services during the setup of the facility in El Cairo. These tasks were undertaken by UPMP (Uranium Powder Manufacturing Plant) and ECRI (Research Reactors Fuel Elements Plant) personnel. Both plants in CNEA served as a FMPP design basis. During the setup of the facility a fuel element with natural uranium was firstly manufactured and then another one using uranium with 20% enrichment. In this paper the responses of the system regarding safety, after finishing the first two stages of manufacturing, are analyzed and evaluated. (author)

Amino acid catabolism and generation of volatiles by lactic acid bacteria

OpenAIRE

Tavaria, F. K.; Dahl, S.; Carballo, F. J.; Malcata, F. X.

2002-01-01

Twelve isolates of lactic acid bacteria, belonging to the Lactobacillus, Lactococcus, Leuconostoc, and Enterococcus genera, were previously isolated from 180- d-old Serra da Estrela cheese, a traditional Portuguese cheese manufactured from raw milk and coagulated with a plant rennet. These isolates were subsequently tested for their ability to catabolize free amino acids, when incubated independently with each amino acid in free form or with a mixture thereof. Attempts...

Issues at manufactured gas plant sites

International Nuclear Information System (INIS)

Menzie, C.A.; Unites, D.F.; Nakles, D.

1991-01-01

Gas, manufactured from coal or oil was used to light and heat homes, industries, and streets of this country from the mid-1800s to the late 1940s or early 1950s. The era, with its associated gas lights, faded with the development of natural gas supplies and direct use of other fossil fuels. Today, Manufactured Gas Plant (MGP) sites are part of our history. Most of the MGPs were operated at a time when the state of the environmental sciences was much less sophisticated and the environmental regulations were much less stringent or nonexistent. While there was an awareness of potential environmental problems then the concerns were more qualitative (e.g., odor, color) and resulted in minimal treatment of process residuals. Inasmuch as there may be over a thousand MGP sites in the United States, it also became clear that utility research institutes such as the Gas Research Institute (GRI) and the Electric Power Research Institute (EPRI) should address key research and management issues related to site investigation, risk assessment, and site remediation. Information gained from these research initiatives would serve the industry as a whole, as well as other groups involved in the assessment of MGP sites. This paper provides and overview of these programs and identifies how additional information can be obtained

Subsurface fate and transport of cyanide species at a manufactured-gas plant site

International Nuclear Information System (INIS)

Ghosh, R.S.; Dzombak, D.A.; Luthy, R.G.; Nakles, D.V.

1999-01-01

Cyanide is present at manufactured-gas plant (MGP) sites in oxide-box residuals, which were often managed on-site as fill during active operations. Cyanide can leach from these materials, causing groundwater contamination. Speciation, fate, and transport of cyanide in a sand-gravel aquifer underlying an MGP site in the upper Midwest region of the US were studied through characterization, monitoring, and modeling of a plume of cyanide-contaminated groundwater emanating from the site. Results indicate that cyanide in the groundwater is primarily in the form of iron-cyanide complexes (>98%), that these complexes are stable under the conditions of the aquifer, and that they are transported as nonreactive solutes in the sand-gravel aquifer material. Weak-acid-dissociable cyanide, which represents a minute fraction of total cyanide in the site groundwater, may undergo chemical-biological degradation in the sand-gravel aquifer. It seems that dilution may be the only natural attenuation mechanism for iron-cyanide complexes in sand-gravel aquifers at MGP sites

Assessing the interaction effect of cost control systems and information technology integration on manufacturing plant financial performance

OpenAIRE

Maiga, Adam S; Nilsson, Anders; Jacobs, Fred

2014-01-01

The interface between management control and information technology is an under-developed research area with a knowledge gap concerning its implications for financial performance. This study contributes to bridging this gap by investigates the interaction effect of cost control systems and information technology integration on manufacturing plant financial performance. We surveyed a sample of 518 managers of U.S. manufacturing plants, approximately evenly distributed between those using activ...

Salicylic acid-independent plant defence pathways

NARCIS (Netherlands)

Pieterse, C.M.J.; Loon, L.C. van

1999-01-01

Salicylic acid is an important signalling molecule involved in both locally and systemically induced disease resistance responses. Recent advances in our understanding of plant defence signalling have revealed that plants employ a network of signal transduction pathways, some of which are

Performance of candu-6 fuel bundles manufactured in romania nuclear fuel plant

International Nuclear Information System (INIS)

Bailescu, A.; Barbu, A.; Din, F.; Dinuta, G.; Dumitru, I.; Musetoiu, A.; Serban, G.; Tomescu, A.

2013-01-01

The purpose of this article is to present the performance of nuclear fuel produced by Nuclear Fuel Plant (N.F.P.) - Pitesti during 1995 - 2012 and irradiated in units U1 and U2 from Nuclear Power Plant (N.P.P.) Cernavoda and also present the Nuclear Fuel Plant (N.F.P.) - Pitesti concern for providing technology to prevent the failure causes of fuel bundles in the reactor. This article presents Nuclear Fuel Plant (N.F.P.) - Pitesti experience on tracking performance of nuclear fuel in reactor and strategy investigation of fuel bundles notified as suspicious and / or defectives both as fuel element and fuel bundle, it analyzes the possible defects that can occur at fuel bundle or fuel element and can lead to their failure in the reactor. Implementation of modern technologies has enabled optimization of manufacturing processes and hence better quality stability of achieving components (end caps, chamfered sheath), better verification of end cap - sheath welding. These technologies were qualified by Nuclear Fuel Plant (N.F.P.) - Pitesti on automatic and Computer Numerical Control (C.N.C.) programming machines. A post-irradiation conclusive analysis which will take place later this year (2013) in Institute for Nuclear Research Pitesti (the action was initiated earlier this year by bringing a fuel bundle which has been reported defective by pool visual inspection) will provide additional information concerning potential damage causes of fuel bundles due to manufacturing processes. (authors)

Metabolic Conversion of l-Ascorbic Acid to Oxalic Acid in Oxalate-accumulating Plants 1

Science.gov (United States)

Yang, Joan C.; Loewus, Frank A.

1975-01-01

l-Ascorbic acid-1-14C and its oxidation product, dehydro-l-ascorbic acid, produced labeled oxalic acid in oxalate-accumulating plants such as spinach seedlings (Spinacia oleracea) and the detached leaves of woodsorrel (Oxalis stricta and O. oregana), shamrock (Oxalis adenopylla), and begonia (Begonia evansiana). In O. oregana, conversion occurred equally well in the presence or absence of light. This relationship between l-ascorbic acid metabolism and oxalic acid formation must be given careful consideration in attempts to explain oxalic accumulation in plants. PMID:16659288

Rolls-Royce's decision to build manufacturing plant will impact Virginia Tech

OpenAIRE

Nystrom, Lynn A.

2007-01-01

Virginia Tech's College of Engineering will receive three endowed chairs, $2 million in support from the state of Virginia for laboratory renovations, some graduate fellowships, and resources for specific international program efforts, as a result of plans by British-based Rolls-Royce to build a new jet engine manufacturing plant in Prince George County.

Formic Acid Manufacture: Carbon Dioxide Utilization Alternatives

Directory of Open Access Journals (Sweden)

Marta Rumayor

2018-06-01

Full Text Available Carbon dioxide (CO2 utilization alternatives for manufacturing formic acid (FA such as electrochemical reduction (ER or homogeneous catalysis of CO2 and H2 could be efficient options for developing more environmentally-friendly production alternatives to FA fossil-dependant production. However, these alternatives are currently found at different technological readiness levels (TRLs, and some remaining technical challenges need to be overcome to achieve at least carbon-even FA compared to the commercial process, especially ER of CO2, which is still farther from its industrial application. The main technical limitations inherited by FA production by ER are the low FA concentration achieved and the high overpotentials required, which involve high consumptions of energy (ER cell and steam (distillation. In this study, a comparison in terms of carbon footprints (CF using the Life Cycle Assessment (LCA tool was done to evaluate the potential technological challenges assuring the environmental competitiveness of the FA production by ER of CO2. The CF of the FA conventional production were used as a benchmark, as well as the CF of a simulated plant based on homogeneous catalysts of CO2 and H2 (found closer to be commercial. Renewable energy utilization as PV solar for the reaction is essential to achieve a carbon-even product; however, the CF benefits are still negligible due to the enormous contribution of the steam produced by natural gas (purification stage. Some ER reactor configurations, plus a recirculation mode, could achieve an even CF versus commercial process. It was demonstrated that the ER alternatives could lead to lower natural resources consumption (mainly, natural gas and heavy fuel oil compared to the commercial process, which is a noticeable advantage in environmental sustainability terms.

A survey for rhinitis in an automotive ring manufacturing plant.

Science.gov (United States)

Park, Dong-Uk; Jin, Ku-Won; Koh, Dong-Hee; Kim, Byung-Kyu; Kim, Kyu-Sang; Park, Doo-Yong

2008-08-01

We report findings regarding otolaryngologist-confirmed rhinitis, current exposure to MWF aerosols, fungi, and endotoxins for workers in a plant manufacturing automobile piston rings. Questionnaire data showed that 61.5% of 187 workers exhibited rhinitis-related symptoms. Rhinitis was confirmed in 99 of 115 workers whom were medically examined. Otolaryngologist-confirmed rhinitis was present in 10 of 19 grinding workers (52.6%), 67 of 142 production workers (47.2%), and 22 of 26 quality control (QC) workers (84.6%). These rates are much higher than the rates of rhinitis-related symptoms in automobile plants and other occupational settings and quite high even allowing for the common occurrence of rhinitis in the general population. We found that rhinitis could develop even in workers exposed to less than 0.5mg/m(3) MWF aerosol. The average exposure to fungi exceeded 10 x 10(3) CFU/m(3), a level higher than that reported for other automobile plants. Although we were unable to identify significant risk factors for rhinitis using only the physician-confirmed rhinitis cases, this study concludes that exposure to MWF aerosol, which would include microbes and metals, could contribute to a high occurrence of rhinitis in grinding and production workers. Forty-nine workers (63.6%) of 77 rhinitis patients in grinding and production operations were determined to handle synthetic MWF directly. For QC workers, for whom the prevalence of physician-confirmed rhinitis was highest, exposure to a low level of MWF aerosol, including specific microbe species we couldn't identify, bright light, dry air, and certain work characteristics during inspection are possible risk factors for development of rhinitis. Further studies including identification of fungi species should be conducted so a firm conclusion can be made regarding the development of rhinitis in QC manufacturing plant workers.

Effects and mechanism of acid rain on plant chloroplast ATP synthase.

Science.gov (United States)

Sun, Jingwen; Hu, Huiqing; Li, Yueli; Wang, Lihong; Zhou, Qing; Huang, Xiaohua

2016-09-01

Acid rain can directly or indirectly affect plant physiological functions, especially photosynthesis. The enzyme ATP synthase is the key in photosynthetic energy conversion, and thus, it affects plant photosynthesis. To clarify the mechanism by which acid rain affects photosynthesis, we studied the effects of acid rain on plant growth, photosynthesis, chloroplast ATP synthase activity and gene expression, chloroplast ultrastructure, intracellular H(+) level, and water content of rice seedlings. Acid rain at pH 4.5 remained the chloroplast structure unchanged but increased the expression of six chloroplast ATP synthase subunits, promoted chloroplast ATP synthase activity, and increased photosynthesis and plant growth. Acid rain at pH 4.0 or less decreased leaf water content, destroyed chloroplast structure, inhibited the expression of six chloroplast ATP synthase subunits, decreased chloroplast ATP synthase activity, and reduced photosynthesis and plant growth. In conclusion, acid rain affected the chloroplast ultrastructure, chloroplast ATPase transcription and activity, and P n by changing the acidity in the cells, and thus influencing the plant growth and development. Finally, the effects of simulated acid rain on the test indices were found to be dose-dependent.

General features of conceptual design for the pilot plant to manufacture fuel rods from mixed oxides

International Nuclear Information System (INIS)

Quesada, C.A.; Adelfang, P.; Esteban, A.; Aparicio, G.; Friedenthal, M.; Orlando, O.S.

1987-01-01

This paper conceptually describes: 1) the processes in the manufacturing lines; 2) the distribution of quality controls and glove boxes in manufacturing lines; 3) the Control and Radiological Safety Room; 4) the Dressing Room; 5) the requirements of the ventilation system. The plant will be located in the first floor of the Radiochemical Processes Laboratory building, occupying a surface of 600 m 2 . The necessary equipment for the following manufacturing lines will be provided: a) conversion from Pu(NO3)4 to PuO 2 (through Pu(III)oxalate); b) manufacture of homogeneous of mixed oxides of U and Pu; c) manufacture of (U,Pu)O 2 pellets; d) manufacture of fuel rods of mixed uranium and plutonium oxides. (Author)

Management of manufacture and installation of plant pipings by bar code system

International Nuclear Information System (INIS)

Suwa, Minoru

1995-01-01

As for the piping system of nuclear power plants, the number of parts is very large, and the mill sheet is attached to each part, therefore, it is necessary to manage them individually, and large man power is required. In order to resolve the delay of mechanization in the factory, bar code system was adopted on full scale. At the time of taking parts out from the store, bar code labels are stuck to all piping parts. By this means, all the processes of manufacture and inspection are managed with a computer, and it is useful for labor saving and the prevention of mistaken input. This system is centering around the system of the progress management for piping manufacture, and is operated by being coupled with respective systems of production design, order and inventory, mill sheet management and installation management. The management of production design, manufacture, inspection and installation is explained. There is the problem of sticking bar code labels again as the labels become dirty or parts pass through coating and pickling processes. The direct carving of bar codes on parts by laser marker was tried, and it was successful for stainless steel, but in carbon steel pipes, it was hard to read. It is desirable to develop the bar codes which endure until the end of plant life. (K.I.)

Plant amino acid-derived vitamins: biosynthesis and function.

Science.gov (United States)

Miret, Javier A; Munné-Bosch, Sergi

2014-04-01

Vitamins are essential organic compounds for humans, having lost the ability to de novo synthesize them. Hence, they represent dietary requirements, which are covered by plants as the main dietary source of most vitamins (through food or livestock's feed). Most vitamins synthesized by plants present amino acids as precursors (B1, B2, B3, B5, B7, B9 and E) and are therefore linked to plant nitrogen metabolism. Amino acids play different roles in their biosynthesis and metabolism, either incorporated into the backbone of the vitamin or as amino, sulfur or one-carbon group donors. There is a high natural variation in vitamin contents in crops and its exploitation through breeding, metabolic engineering and agronomic practices can enhance their nutritional quality. While the underlying biochemical roles of vitamins as cosubstrates or cofactors are usually common for most eukaryotes, the impact of vitamins B and E in metabolism and physiology can be quite different on plants and animals. Here, we first aim at giving an overview of the biosynthesis of amino acid-derived vitamins in plants, with a particular focus on how this knowledge can be exploited to increase vitamin contents in crops. Second, we will focus on the functions of these vitamins in both plants and animals (and humans in particular), to unravel common and specific roles for vitamins in evolutionary distant organisms, in which these amino acid-derived vitamins play, however, an essential role.

Survival of the Best Fit: Competition from Low Wage Countries and the (Uneven) Growth of US Manufacturing Plants

OpenAIRE

Andrew B. Bernard; J. Bradford Jensen; Peter K. Schott

2002-01-01

We examine the relationship between import competition from low wage countries and the reallocation of US manufacturing from 1977 to 1997. Both employment and output growth are slower for plants that face higher levels of low wage import competition in their industry. As a result, US manufacturing is reallocated over time towards industries that are more capital and skill intensive. Differential growth is driven by a combination of increased plant failure rates and slower growth of surviving ...

Harties' two-man acid plant now fully on stream

International Nuclear Information System (INIS)

Anon.

1979-01-01

Hartebeesfontein gold mine is the most modern of its kind in South Africa. Only two men are required to operate this R12 million acid plant. The plant is capable of producing 140 000 t of sulphuric acid a year, and will meet its own uranium recovery process requirements as well as those of other uranium producers in the Klerksdorp and Stilfontein areas. In simplified form the process involves roasting pyrite to form sulphur dioxide. This is then cleaned, dried, heated and reacted over catalyst to produce sulphur tri-oxide which is combined with water to form sulphuric acid. Where the pyrite is gold-bearing, the resultant calcines from the roasting process are pumped to the mine's recovery plant where the residual gold is extracted. The main reason for the construction of the plant was to supply Hartebeesfontein and other uranium producers in the Klerksdorp and Stilfontein areas with sulphuric acid which is used in the uranium leaching process

Legal aspects of the clean-up and reclamation of the manufactured gas plants

Energy Technology Data Exchange (ETDEWEB)

Joldzic, V. [Belgrade University, Belgrade (Yugoslavia). Inst. for Criminology and Sociological Research

1995-12-31

The laws associated with the cleanup of manufactured gas plants in Yugoslavia is described. These comprise the Environmental Protection Act; the Law about Space Planning and Organizing; Building Law; and Agricultural Land Use Law. Joint remedial action in the Danube Basin is discussed. 13 refs.

Automation of an energy-autarkic manufacturing plant following IEC 61499; Automatisierung einer energieautarken Fertigungsanlage nach IEC 61499

Energy Technology Data Exchange (ETDEWEB)

Gerber, Christian; Hirsch, Martin; Hanisch, Hans-Michael [Halle-Wittenberg Univ., Halle (Saale) (Germany). Lehrstuhl Automatisierungstechnik

2009-07-01

The requirements for future manufacturing plants are, beyond others, seamless reconfiguration, autonomy as far as possible as well as easy employment and maintenance for the end user. Within the EnAS project (Energy-Autarkic Actuators and Sensors), the group of the Automation Technology Lab in Halle has challenged the fulfillment of those requirements. Therefore, IEC 61499 compliant distributed controllers have been developed for the demonstrator-plant under particular consideration of reconfigurability. These controllers have been integrated into the process sequences of the demonstrator and afterwards several reconfiguration scenarios have been designed. The building of a Human-Machine-Interface for visualization and reconfiguration of the plant was an essential issue as well. The result is a highly flexible, easily reconfigurable system, which can be regarded as a prototype for automated manufacturing plants of a new generation. (orig.)

UV-C-Induced alleviation of transcriptional gene silencing through plant-plant communication: Key roles of jasmonic acid and salicylic acid pathways.

Science.gov (United States)

Xu, Wei; Wang, Ting; Xu, Shaoxin; Li, Fanghua; Deng, Chenguang; Wu, Lijun; Wu, Yuejin; Bian, Po

2016-08-01

Plant stress responses at the epigenetic level are expected to allow more permanent changes of gene expression and potentially long-term adaptation. While it has been reported that plants subjected to adverse environments initiate various stress responses in their neighboring plants, little is known regarding epigenetic responses to external stresses mediated by plant-plant communication. In this study, we show that DNA repetitive elements of Arabidopsis thaliana, whose expression is inhibited epigenetically by transcriptional gene silencing (TGS) mechanism, are activated by UV-C irradiation through airborne plant-plant and plant-plant-plant communications, accompanied by DNA demethylation at CHH sites. Moreover, the TGS is alleviated by direct treatments with exogenous methyl jasmonate (MeJA) and methyl salicylate (MeSA). Further, the plant-plant and plant-plant-plant communications are blocked by mutations in the biosynthesis or signaling of jasmonic acid (JA) or salicylic acid (SA), indicating that JA and SA pathways are involved in the interplant communication for epigenetic responses. For the plant-plant-plant communication, stress cues are relayed to the last set of receiver plants by promoting the production of JA and SA signals in relaying plants, which exhibit upregulated expression of genes for JA and SA biosynthesis and enhanced emanation of MeJA and MeSA. Copyright © 2016 Elsevier B.V. All rights reserved.

Isolation of gallic acid-producing microorganisms and their use in ...

African Journals Online (AJOL)

STORAGESEVER

al., 2005). Tannase is an industrially important enzyme ... The enzymatic product gallic acid (3,4,5-trihydroxy- benzoic ... also used in leather industry, in manufacturing gallic acid esters ..... the economics of a plant (Misro et al., 1997). At the 9 ...

Conversion of Ulba Metallurgy Plant

International Nuclear Information System (INIS)

Onoprienko, O.

1996-01-01

General Information 'Ulba Metallurgical plant' Joint Stock Company successfully operates for more than 46 years. The plant was established by MINSREDMASH, USSR and at the present moment has finished complexes for production of nuclear fuel for atomic power stations, tantalum and superconducting materials production, beryllium, hydrofluoric acid manufacture and engineering production. Problem Essence In spite of the monopoly possession of tantalum manufacture, beryllium and uranium fuel, superconducting materials in Commonwealth of Independent States countries, company has serious financial problems due to the critical situation in Commonwealth of Independent States countries, production ties collapse and fast market demand decrease for the Ulba Metallurgical Plant Joint Stock Company products. The alternative decision is to create substitute productions, conversion integrating and introducing new products to the world market

Surrogate Plant Data Base : Volume 3. Appendix D : Facilities Planning Data ; Operating Manpower, Manufacturing Budgets and Pre-Production Launch ...

Science.gov (United States)

1983-05-01

This four volume report consists of a data base describing "surrogate" automobile and truck manufacturing plants developed as part of a methodology for evaluating capital investment requirements in new manufacturing facilities to build new fleets of ...

Accumulation and phytotoxicity of perfluorooctanoic acid in the model plant species Arabidopsis thaliana

International Nuclear Information System (INIS)

Yang, Xinping; Ye, Chengchen; Liu, Yu; Zhao, Fang-Jie

2015-01-01

Perfluorooctanoic acid (PFOA) is widely used in the manufacture of many industrial and household products. To assess the potential environmental risk of PFOA, its accumulation, translocation and phytotoxic effects were investigated using the model plant species Arabidopsis thaliana. Exposure to 18 μM PFOA-F in agar plates did not affect plant growth, but 181–1811 μM PFOA-F inhibited root and shoot growth. PFOA was more phytotoxic on shoot growth than NaF at the equivalent F concentration, with the latter having 3.9–7.6 times higher EC50 for shoot biomass than PFOA. PFOA was efficiently translocated from roots to shoots, where it existed as intact PFOA molecules without transformation evidenced by the 19 F NMR spectra. PFOA caused a significant increase in the concentration of H 2 O 2 and malondialdehyde (MDA) in shoots, indicating that oxidative stress is a likely cause of PFOA phytotoxicity. - Highlights: • PFOA is more phytotoxic on shoot growth than NaF at the equivalent F concentration. • PFOA is readily taken up and translocated from roots to shoots. • PFOA exists as intact molecules without transformation in Arabidopsis shoots. • PFOA causes oxidative stress in Arabidopsis shoots. - Perfluorooctanoic acid causes oxidative stress and is more phytotoxic on shoot growth than inorganic fluoride at the equivalent F concentration.

A COUNTY-LEVEL MODEL OF MANUFACTURING PLANT RECRUITMENT WITH IMPROVED INDUSTRIAL SITE QUALITY MEASUREMENT

OpenAIRE

Kriesel, Warren; McNamara, Kevin T.

1991-01-01

Empirical analysis of manufacturing plant location requires the use of a single industrial site quality measure. Under hedonic price theory, the price of industrial sites can be explained by their quality characteristics. The estimated site price is included with ten other location factors in an ordered, categorical logit model of plant attraction to Georgia counties. The results inform public decision-makers of the relative impact of site location factors and how changes in location factors ...

Study on the extraction, purification and quantification of jasmonic acid, abscisic acid and indole-3-acetic acid in plants.

Science.gov (United States)

Zhang, Feng Juan; Jin, You Ju; Xu, Xing You; Lu, Rong Chun; Chen, Hua Jun

2008-01-01

Jasmonic acid (JA), abscisic acid (ABA) and indole-3-acetic acid (IAA) are important plant hormones. Plant hormones are difficult to analyse because they occur in small concentrations and other substances in the plant interfere with their detection. To develop a new, inexpensive procedure for the rapid extraction and purification of IAA, ABA and JA from various plant species. Samples were prepared by extraction of plant tissues with methanol and ethyl acetate. Then the extracts were further purified and enriched with C(18) cartridges. The final extracts were derivatised with diazomethane and then measured by GC-MS. The results of the new methodology were compared with those of the Creelman and Mullet procedure. Sequential elution of the assimilates from the C(18 )cartridges revealed that IAA and ABA eluted in 40% methanol, while JA subsequently eluted in 60% methanol. The new plant hormone extraction and purification procedure produced results that were comparable to those obtained with the Creelman and Mullet's procedure. This new procedure requires only 0.5 g leaf samples to quantify these compounds with high reliability and can simultaneously determine the concentrations of the three plant hormones. A simple, inexpensive method was developed for determining endogenous IAA, ABA and JA concentrations in plant tissue.

Managing Your Energy; An Energy Star Guide for Identifying Energy Savings in Manufacturing Plants

NARCIS (Netherlands)

Worrell, E.; Angelini, T.; Masanet, E.

2010-01-01

In the United States, industry spends over $100 billion annually to power its manufacturing plants. Companies also spend on maintenance, capital outlay, and energy services. Improving energy efficiency is vital to reduce these costs and increase earnings. Many cost-effective opportunities to reduce

Manufacture of heat exchangers

International Nuclear Information System (INIS)

Burton, J.E.; Tombs, R.W.T.

1980-01-01

A tube bundle for use in a heat exchanger has a series of spaced parallel tubes supported by tube plates and is manufactured by depositing welding material around the end of each tube, machining the deposited material to form an annular flange around the end of the tube and welding the flange into apertures in the tube plate. Preferably the tubes have a length which is slightly less than the distance between the outer surfaces of the tube plates and the deposited material is deposited so that it overlaps and protects the end surfaces of the tubes. A plug may be inserted in the bore of the tubes during the welding material deposition which, as described, is effected by manual metal arc welding. One use of heat exchangers incorporating a tube bundle manufactured as above is in apparatus for reducing the volume of, and recovering nitric acid from, radioactive effluents from a nuclear reprocessing plant. (author)

Biological properties of nitro-fatty acids in plants.

Science.gov (United States)

Mata-Pérez, Capilla; Padilla, María N; Sánchez-Calvo, Beatriz; Begara-Morales, Juan C; Valderrama, Raquel; Chaki, Mounira; Barroso, Juan B

2018-03-27

Nitro-fatty acids (NO 2 -FAs) are formed from the reaction between nitrogen dioxide (NO 2 ) and mono and polyunsaturated fatty acids. Knowledge concerning NO 2 -FAs has significantly increased within a few years ago and the beneficial actions of these species uncovered in animal systems have led to consider them as molecules with therapeutic potential. Based on their nature and structure, NO 2 -FAs have the ability to release nitric oxide (NO) in aqueous environments and the capacity to mediate post-translational modifications (PTM) by nitroalkylation. Recently, based on the potential of these NO-derived molecules in the animal field, the endogenous occurrence of nitrated-derivatives of linolenic acid (NO 2 -Ln) was assessed in plant species. Moreover and through RNA-seq technology, it was shown that NO 2 -Ln can induce a large set of heat-shock proteins (HSPs) and different antioxidant systems suggesting this molecule may launch antioxidant and defence responses in plants. Furthermore, the capacity of this nitro-fatty acid to release NO has also been demonstrated. In view of this background, here we offer an overview on the biological properties described for NO 2 -FAs in plants and the potential of these molecules to be considered new key intermediaries of NO metabolism in the plant field. Copyright © 2018 Elsevier Inc. All rights reserved.

Postillumination burst of carbon dioxide in crassalacean Acid metabolism plants.

Science.gov (United States)

Crews, C E; Vines, H M; Black, C C

1975-04-01

Immediately following exposure to light, a postillumination burst of CO(2) has been detected in Crassulacean acid metabolism plants. A detailed study with pineapple (Ananas comosus) leaves indicates that the postillumination burst changes its amplitude and kinetics during the course of a day. In air, the postillumination burst in pineapple leaves generally is exhibited as two peaks. The postillumination burst is sensitive to atmospheric CO(2) and O(2) concentrations as well as to the light intensity under which plants are grown. We propose that the CO(2) released in the first postillumination burst peak is indicative of photorespiration since it is sensitive to either O(2) or CO(2) concentration while the second CO(2) evolution peak is likely due to decarboxylation of organic acids involved in Crassulacean acid metabolism.In marked contrast to other higher plants, the postillumination burst in Crassulacean acid metabolism plants can be equal to or greater than the rate of photosynthesis. Photosynthesis in pineapple leaves also varies throughout a day. Both photosynthesis and the postillumination burst have a daily variation which apparently is a complex function of degree of leaf acidity, growth light intensity, ambient gas phase, and the time a plant has been exposed to a given gas.

Support given by the manufacturer

International Nuclear Information System (INIS)

Schomer, E.

1993-01-01

As regards German NPP, the purchaser has the control function and the manufacturer the role of a general planner binding together all supply lots. Therefore the manufacturer possesses a very broad and thorough detailed knowledge of the plant functioning and becomes a life-long important partner of the plant. Such partnership requires from the manufacturer to provide continuously available and economical services to the plant; he must work purposefully in a quality-conscious and innovative way. This is his vision, and he will comply with it over the whole service life of the plant. The importance of services is illustrated by a large number of examples. (orig./DG) [de

Uric acid in plants and microorganisms: Biological applications and genetics - A review.

Science.gov (United States)

Hafez, Rehab M; Abdel-Rahman, Tahany M; Naguib, Rasha M

2017-09-01

Uric acid increased accumulation and/or reduced excretion in human bodies is closely related to pathogenesis of gout and hyperuricemia. It is highly affected by the high intake of food rich in purine. Uric acid is present in both higher plants and microorganisms with species dependent concentration. Urate-degrading enzymes are found both in plants and microorganisms but the mechanisms by which plant degrade uric acid was found to be different among them. Higher plants produce various metabolites which could inhibit xanthine oxidase and xanthine oxidoreductase, so prohibit the oxidation of hypoxanthine to xanthine then to uric acid in the purine metabolism. However, microorganisms produce group of degrading enzymes uricase, allantoinase, allantoicase and urease, which catalyze the degradation of uric acid to the ammonia. In humans, researchers found that several mutations caused a pseudogenization (silencing) of the uricase gene in ancestral apes which exist as an insoluble crystalloid in peroxisomes. This is in contrast to microorganisms in which uricases are soluble and exist either in cytoplasm or peroxisomes. Moreover, many recombinant uricases with higher activity than the wild type uricases could be induced successfully in many microorganisms. The present review deals with the occurrence of uric acid in plants and other organisms specially microorganisms in addition to the mechanisms by which plant extracts, metabolites and enzymes could reduce uric acid in blood. The genetic and genes encoding for uric acid in plants and microorganisms are also presented.

Uric acid in plants and microorganisms: Biological applications and genetics - A review

Directory of Open Access Journals (Sweden)

Rehab M. Hafez

2017-09-01

Full Text Available Uric acid increased accumulation and/or reduced excretion in human bodies is closely related to pathogenesis of gout and hyperuricemia. It is highly affected by the high intake of food rich in purine. Uric acid is present in both higher plants and microorganisms with species dependent concentration. Urate-degrading enzymes are found both in plants and microorganisms but the mechanisms by which plant degrade uric acid was found to be different among them. Higher plants produce various metabolites which could inhibit xanthine oxidase and xanthine oxidoreductase, so prohibit the oxidation of hypoxanthine to xanthine then to uric acid in the purine metabolism. However, microorganisms produce group of degrading enzymes uricase, allantoinase, allantoicase and urease, which catalyze the degradation of uric acid to the ammonia. In humans, researchers found that several mutations caused a pseudogenization (silencing of the uricase gene in ancestral apes which exist as an insoluble crystalloid in peroxisomes. This is in contrast to microorganisms in which uricases are soluble and exist either in cytoplasm or peroxisomes. Moreover, many recombinant uricases with higher activity than the wild type uricases could be induced successfully in many microorganisms. The present review deals with the occurrence of uric acid in plants and other organisms specially microorganisms in addition to the mechanisms by which plant extracts, metabolites and enzymes could reduce uric acid in blood. The genetic and genes encoding for uric acid in plants and microorganisms are also presented.

Growth and Survival of Acid-Resistant and Non-Acid-Resistant Shiga-Toxin-Producing Escherichia coli Strains during the Manufacture and Ripening of Camembert Cheese.

Science.gov (United States)

Montet, M P; Jamet, E; Ganet, S; Dizin, M; Miszczycha, S; Dunière, L; Thevenot, D; Vernozy-Rozand, C

2009-01-01

Growth and survival of acid-resistant (AR) and non-acid-resistant (NAR) Shiga-toxin-producing Escherichia coli (STEC) strains were investigated during the manufacture and ripening of microfiltered milk Camembert cheeses. The induction of acid resistance of the STEC strains in cheeses was also studied. Six different mixtures of AR and/or NAR STEC strains were inoculated separately into microfiltered milk at a level of 10(3) CFU mL(-1). The STEC counts (AR and NAR) initially increased by 1 to 2 log(10) CFU g(-1) during cheese-making. Thereafter, the populations stabilized during salting/drying and then decreased during the early stages of ripening. Exposing the STEC strains in artificially inoculated cheeses to simulated gastric fluid (SGF - pH: 2.0) reduced the number of NAR strains to undetectable levels within 40 minutes, versus 120 minutes for the AR STEC strains. AR and NAR STEC were able to survive during the manufacture and ripening of Camembert cheese prepared from microfiltered milk with no evidence of induced acid tolerance in NAR STEC strains.

Growth and Survival of Acid-Resistant and Non-Acid-Resistant Shiga-Toxin-Producing Escherichia coli Strains during the Manufacture and Ripening of Camembert Cheese

Directory of Open Access Journals (Sweden)

M. P. Montet

2009-01-01

Full Text Available Growth and survival of acid-resistant (AR and non-acid-resistant (NAR Shiga-toxin-producing Escherichia coli (STEC strains were investigated during the manufacture and ripening of microfiltered milk Camembert cheeses. The induction of acid resistance of the STEC strains in cheeses was also studied. Six different mixtures of AR and/or NAR STEC strains were inoculated separately into microfiltered milk at a level of 103 CFU mL−1. The STEC counts (AR and NAR initially increased by 1 to 2 log⁡10 CFU g−1 during cheese-making. Thereafter, the populations stabilized during salting/drying and then decreased during the early stages of ripening. Exposing the STEC strains in artificially inoculated cheeses to simulated gastric fluid (SGF - pH: 2.0 reduced the number of NAR strains to undetectable levels within 40 minutes, versus 120 minutes for the AR STEC strains. AR and NAR STEC were able to survive during the manufacture and ripening of Camembert cheese prepared from microfiltered milk with no evidence of induced acid tolerance in NAR STEC strains.

76 FR 63878 - New Source Performance Standards Review for Nitric Acid Plants

Science.gov (United States)

2011-10-14

... technologies. Nitric acid production is also one of the industrial sectors for which ``white papers'' were... standards (NSPS) for nitric acid plants. Nitric acid plants include one or more nitric acid production units. These proposed revisions include a change to the nitrogen oxides (NO X ) emission limit, which applies...

Trienoic fatty acids and plant tolerance of temperature

Directory of Open Access Journals (Sweden)

Routaboul Jean-Marc

2002-01-01

Full Text Available The biophysical reactions of light harvesting and electron transport during photosynthesis take place in a uniquely constructed bilayer, the thylakoid. In all photosynthetic eukaryotes, the complement of atypical glycerolipid molecules that form the foundation of this membrane are characterised by sugar head-groups and a very high level of unsaturation in the fatty acids that occupy the central portion of the thylakoid bilayer. alpha-linolenic (18:3 or a combination of 18:3 and hexadecatrienoic (16:3 acids typically account for approximately two-thirds of all thylakoid membrane fatty acids and over 90% of the fatty acids of monogalactosyl diacylglycerol, the major thylakoid lipid [1, 2]. The occurrence of trienoic fatty acids as a major component of the thylakoid membrane is especially remarkable since these fatty acids form highly reactive targets for active oxygen species and free radicals, which are often the by-products of oxygenic photosynthesis. Photosynthesis is one of the most temperature-sensitive functions of plant [3, 4]. There remains a widespread belief that these trienoic fatty acids might have some crucial role in plants to be of such universal occurrence, especially in photosynthesis tolerance of temperature [5].

Wage Differentials between Foreign Multinationals and Local Plants and Worker Quality in Malaysian Manufacturing

OpenAIRE

Eric D. Ramstetter

2014-01-01

Using industrial census data for 2000, and smaller sets of survey data for 2001–2004, this paper examines the extent of wage differentials between medium-large (20 or more workers) foreign multinational enterprises (MNEs) and local plants in Malaysia's manufacturing industries. On average, wages in sample MNEs were higher than in local plants by two-fifths or more. In addition to being more capital-intensive and relatively large, MNEs also hired higher shares of workers in highly paid occup...

Wage Differentials between Foreign Multinationals and Local Plants and Worker Quality in Malaysian Manufacturing

OpenAIRE

エリック D., ラムステッター; Eric D. , Ramstetter

2013-01-01

Using industrial census data for 2000, and smaller sets of survey data for 2001-2004, this paper examines the extent of wage differentials between medium-large (20 or more workers) foreign multinational enterprises (MNEs) and local plants in Malaysia’s manufacturing industries. On average, wages in sample MNEs were higher than in local plants by two-fifths or more. MNEs also hired higher shares of workers in highly paid occupations and with moderate or high education, in addition to being mor...

Role Of Ascorbic Acid In Imparting Tolerance To Plants Against Oxidizing Pollutants

Directory of Open Access Journals (Sweden)

Priyanka Sharma

2015-08-01

Full Text Available Ascorbic acid is an antioxidant in plants which play important role in activation of many physiological and defense mechanisms. The level of ascorbic acid in plants is determinant of its tolerance against the adverse effect of oxidizing pollutants. The present study tries to relate the variation in ascorbic acid content with the tolerance and sensitivity of two selected plant species viz. Azadirachtaindica and Pongamiapinnata by calculating their Air Pollution Tolerance Index APTI during winter season from November to March in the urban city Delhi of North India. Moreover ascorbic acid is also an important part of chloroplast it protects different components of photosynthetic system from oxidative stress. Thus to understand the role of ascorbic acid in imparting tolerance to plants against oxidizing pollutants the changes in chlorophyll content of the selected plant species with variation in ambient ozone concentration was analysed. It was found that as per APTI values Azadirachta sp. came under tolerant range with highest ascorbic acid content whereas Pongamia sp. was under intermediate range with less ascorbic acid content. It was statistically established that ozone has no significant relation with chlorophyll content of Azadirachta sp. which has the highest ascorbic acid content. Whereas ambient ozone concentrations showed significant negative relation with the chlorophyll content of Pongamia sp. p 0.05. Thus it was observed that the plants with high ascorbic acid content are tolerant and have greater ability to remediate pollutants.

Amino acid production exceeds plant nitrogen demand in Siberian tundra

Science.gov (United States)

Wild, Birgit; Eloy Alves, Ricardo J.; Bárta, Jiři; Čapek, Petr; Gentsch, Norman; Guggenberger, Georg; Hugelius, Gustaf; Knoltsch, Anna; Kuhry, Peter; Lashchinskiy, Nikolay; Mikutta, Robert; Palmtag, Juri; Prommer, Judith; Schnecker, Jörg; Shibistova, Olga; Takriti, Mounir; Urich, Tim; Richter, Andreas

2018-03-01

Arctic plant productivity is often limited by low soil N availability. This has been attributed to slow breakdown of N-containing polymers in litter and soil organic matter (SOM) into smaller, available units, and to shallow plant rooting constrained by permafrost and high soil moisture. Using 15N pool dilution assays, we here quantified gross amino acid and ammonium production rates in 97 active layer samples from four sites across the Siberian Arctic. We found that amino acid production in organic layers alone exceeded literature-based estimates of maximum plant N uptake 17-fold and therefore reject the hypothesis that arctic plant N limitation results from slow SOM breakdown. High microbial N use efficiency in organic layers rather suggests strong competition of microorganisms and plants in the dominant rooting zone. Deeper horizons showed lower amino acid production rates per volume, but also lower microbial N use efficiency. Permafrost thaw together with soil drainage might facilitate deeper plant rooting and uptake of previously inaccessible subsoil N, and thereby promote plant productivity in arctic ecosystems. We conclude that changes in microbial decomposer activity, microbial N utilization and plant root density with soil depth interactively control N availability for plants in the Arctic.

Good manufacturing practices production of a purification-free oral cholera vaccine expressed in transgenic rice plants.

Science.gov (United States)

Kashima, Koji; Yuki, Yoshikazu; Mejima, Mio; Kurokawa, Shiho; Suzuki, Yuji; Minakawa, Satomi; Takeyama, Natsumi; Fukuyama, Yoshiko; Azegami, Tatsuhiko; Tanimoto, Takeshi; Kuroda, Masaharu; Tamura, Minoru; Gomi, Yasuyuki; Kiyono, Hiroshi

2016-03-01

The first Good Manufacturing Practices production of a purification-free rice-based oral cholera vaccine (MucoRice-CTB) from transgenic plants in a closed cultivation system yielded a product meeting regulatory requirements. Despite our knowledge of their advantages, plant-based vaccines remain unavailable for human use in both developing and industrialized countries. A leading, practical obstacle to their widespread use is producing plant-based vaccines that meet governmental regulatory requirements. Here, we report the first production according to current Good Manufacturing Practices of a rice-based vaccine, the cholera vaccine MucoRice-CTB, at an academic institution. To this end, we established specifications and methods for the master seed bank (MSB) of MucoRice-CTB, which was previously generated as a selection-marker-free line, evaluated its propagation, and given that the stored seeds must be renewed periodically. The production of MucoRice-CTB incorporated a closed hydroponic system for cultivating the transgenic plants, to minimize variations in expression and quality during vaccine manufacture. This type of molecular farming factory can be operated year-round, generating three harvests annually, and is cost- and production-effective. Rice was polished to a ratio of 95 % and then powdered to produce the MucoRice-CTB drug substance, and the identity, potency, and safety of the MucoRice-CTB product met pre-established release requirements. The formulation of MucoRice-CTB made by fine-powdering of drug substance and packaged in an aluminum pouch is being evaluated in a physician-initiated phase I study.

Plant uptake and soil retention of phthalic acid applied to Norfolk sandy loam

International Nuclear Information System (INIS)

Dorney, J.R.; Weber, J.B.; Overcash, M.R.; Strek, H.J.

1985-01-01

Plant uptake and soil retention of 14 C carboxyl-labeled phthalic acid were studied at application rates of 0.6, 6.0, 60.0, and 600.0 ppm (soil dry weight) to Norfolk sandy loam (Typic Paleudult, fine loamy, kaolinitic, thermic). Height and dry weight of corn (Zea mays L. Pioneer 3368A) (21 day), tall fescue (Festuca arundinacea Schreb. Kentucky 31) (45 day) immature soybean (Glycine max (L.) Merr. Altoona) (21 day) plant, mature soybean plant, and mature wheat (Triticum aestivum L. Butte) straw were not affected by phthalic acid applied to soil. In addition, soybean seed and wheat seed dry weight were unaffected. Immature wheat (40 day) height decreased at the 600 ppm rate. Plant uptake of phthalic acid ranged from 0 to 23 ppm and was significantly above background for all plants and plant materials except soybean pods. Fescue and immature plants exhibited the highest concentration of phthalic acid while mature wheat plants and wheat seeds exhibited the least. Most of the phthalic acid volatilized or was decomposed from the soil by the end of the study; an average of only 5.7% of the originally applied chemical was recovered in both soil or plants. An average of 0.02% of the originally applied phthalic acid leached out of the treated zone. Considering the low toxicity of phthalic acid and its relatively rapid disappearance from soil, it is unlikely to become a health hazard from contaminated plants. However, plant uptake of other toxic organics could potentially become a hazard on soils treated with sludge containing significant quantities of these substances

Measurement of sustainability index among paper manufacturing plants

Science.gov (United States)

Sharathkumar Reddy, V.; Jayakrishna, K.; Lal, Babu

2017-11-01

The paper manufacturing companies are facing challenges to implement sustainable manufacturing into their products and processes. Paper manufacturing has remarked as an intensive consumer of natural raw materials, energy and a major source of multiple pollutants. Thus, evaluating the sustainable manufacturing in these companies has become a necessity. This paper proposes a set of Performance Indicators (PIs) for evaluating the sustainable manufacturing appropriate to the paper manufacturing companies based on the triple bottom line of sustainability. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), a multi-criteria decision analysis method is applied to prioritize the performance indicators by summarizing the opinions of stakeholders. It is hoped that the proposed PIs enables and assists the paper manufacturing companies to achieve the higher performance in sustainable manufacturing and so as to increase their competitiveness.

Development of Manufacturing Method of Highly Functional Material Gallic acid-CLA Ester Using Irradiation

International Nuclear Information System (INIS)

Cho, C. H.; Byun, M. W.; Jeong, I. Y.; Kim, D. H.

2006-01-01

Increasing interest and current trends for natural materials with various health beneficial functions by radiation (RT)-biotechnology (BT) fusion by developed countries. However, the information and development of new functional materials using the RT-BT fusion technology is still limited. The target material developed and manufactured by RT-BT fusion technology may have a multi-functional effect on human health and it can be applied for pharmaceutical materials as well as functional food ingredient. The market of functional new materials has been grown dramatically and a multi-functional material manufactured by RT-BT fusion technology may have a great economic impact for both the domestic and overseas market. Development of GA-CLA ester by chemical synthetic method. Transformation of linoleic acid to conjugated linoleic acid by irradiation. Identification and confirmation of the biological functions including antioxidative, cancer cell proliferation inhibition, anti-microbial, enhancement of immune response and lipid metabolism of GA-CLA ester. Increase industrial applicability of the new materials. Development of GA-CLA ester by chemical synthetic method(2 patents submitted). Development of the optimum methodology of GA-CLA and its derivative, octadeca-9,12-dienyl-3,4,5-trihydroxy benzoate). Identification and confirmation of biological activities of GA-CLA. Extramural funding from the Ministry of Commerce, Industry, and Energy subjected by gallic acid-fatty acid derivatives (205,000,000 Won). Provides the basic data for successful project 'Development of cosmeceutical and cosmetics using gallic acid fatty acid derivatives' funded by Ministry of Commerce, Industry, and Energy and collaboration with the Technology-invested venture company, SunBiotech, Co. and problem-solving for industrial application. Complete the patent procedure and publish the results to international or domestic peer-reviewed journals

Simultaneous determination of shikimic acid, salicylic acid and jasmonic acid in wild and transgenic Nicotiana langsdorffii plants exposed to abiotic stresses.

Science.gov (United States)

Scalabrin, Elisa; Radaelli, Marta; Capodaglio, Gabriele

2016-06-01

The presence and relative concentration of phytohormones may be regarded as a good indicator of an organism's physiological state. The integration of the rolC gene from Agrobacterium rhizogenes and of the rat glucocorticoid receptor (gr) in Nicotiana langsdorffii Weinmann plants has shown to determine various physiological and metabolic effects. The analysis of wild and transgenic N. langsdorffii plants, exposed to different abiotic stresses (high temperature, water deficit, and high chromium concentrations) was conducted, in order to investigate the metabolic effects of the inserted genes in response to the applied stresses. The development of a new analytical procedure was necessary, in order to assure the simultaneous determination of analytes and to obtain an adequately low limit of quantification. For the first time, a sensitive HPLC-HRMS quantitative method for the simultaneous determination of salicylic acid, jasmonic acid and shikimic acid was developed and validated. The method was applied to 80 plant samples, permitting the evaluation of plant stress responses and highlighting some metabolic mechanisms. Salicylic, jasmonic and shikimic acids proved to be suitable for the comprehension of plant stress responses. Chemical and heat stresses showed to induce the highest changes in plant hormonal status, differently affecting plant response. The potential of each genetic modification toward the applied stresses was marked and particularly the resistance of the gr modified plants was evidenced. This work provides new information in the study of N. langsdorffii and transgenic organisms, which could be useful for the further application of these transgenes. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Effect of polyacetylenic acids from Prunella vulgaris on various plant pathogens.

Science.gov (United States)

Yoon, M-Y; Choi, G J; Choi, Y H; Jang, K S; Park, M S; Cha, B; Kim, J-C

2010-11-01

This study is aiming at characterizing antifungal substances from the methanol extract of Prunella vulgaris and at investigating those substances' antifungal and antioomycete activities against various plant pathogens. Two polyacetylenic acids were isolated from P. vulgaris as active principles and identified as octadeca-9,11,13-triynoic acid and trans-octadec-13-ene-9,11-diynoic acid. These two compounds inhibited the growth of Magnaporthe oryzae, Rhizoctonia solani, Phytophthora infestans, Sclerotinia sclerotiorum, Fusarium oxysporum f. sp. raphani, and Phytophthora capsici. In addition, these two compounds and the wettable powder-type formulation of an n-hexane fraction of P. vulgaris significantly suppressed the development of rice blast, tomato late blight, wheat leaf rust, and red pepper anthracnose. These data show that the extract of P. vulgaris and two polyacetylenic acids possess antifungal and antioomycete activities against a broad spectrum of tested plant pathogens. This is the first report on the occurrence of octadeca-9,11,13-triynoic acid and trans-octadec-13-ene-9,11-diynoic acid in P. vulgaris and their efficacy against plant diseases. The crude extract containing the two polyacetylenic acids can be used as a natural fungicide for the control of various plant diseases. © 2010 The Authors. © 2010 The Society for Applied Microbiology.

Manufacturing of porous oxide ceramics by replication of plant morphologies

Energy Technology Data Exchange (ETDEWEB)

Sieber, H.; Rambo, C.; Cao, J.; Vogli, E.; Greil, P. [Erlangen-Nuernberg Univ., Erlangen (DE). Dept. of Materials Science (III) Glass and Ceramics

2002-07-01

Biomorphic oxide ceramics of alumina, mullite and zirconia with a directed pore morphology on the micrometer level were manufactured from bioorganic plant structures by sol-gel processing as well as sol-assisted nano-powder infiltrations. The inherent open porous morphology of natural grown rattan palms was used for vacuum-infiltration with aluminum isopropoxide (Al(OC{sub 3}H{sub 7}){sub 3}), zirconium oxichloride (ZrOCl{sub 2}.8H{sub 2}O) and SiO{sub 2} nano powder. Hydrolysis of the sols by adding HNO{sub 3} and pyrolysis in inert atmosphere at 800 C resulted in the formation of biocarbon/ceramic replica of the original wood morphology. The specimens were sintered in air at temperatures up to 1600 C to yield porous oxide ceramics with an unidirected pore structure similar to the original plant material. Repeated infiltration, hydrolysis and annealing steps were applied to increase the density of the ceramic materials. (orig.)

Draft environmental statement related to the proposed manufacture of floating nuclear power plants (Docket No. STN 50-437)

International Nuclear Information System (INIS)

1976-10-01

The proposed action is the issuance of a manufacturing license to Offshore Power Systems for the startup and operation of a proposed manufacturing facility located at Blount Island, Jacksonville, Florida (Docket No. STN 50-436). No nuclear fuel will be handled or stored at the manufacturing site. The plants will be fueled after they have been towed to and moored within breadwaters at specific offshore locations designated by the purchaser and after an operating license has been issued by the Nuclear Regulatory Commision. Each nuclear generating plant, mounted on a floating platform, has a net capacity of 1150 MWe. This energy is provided by a pressurized water reactor steam supply system consisting of a Westinghouse four-loop 3425 MWt unit with an ice-condenser containment system. When one or more of these units is located within a single breakwater, the installation is designated an offshore power station. 3 figs., 1 tab

Levels and distribution of polybrominated diphenyl ethers (PBDEs) in the freshwater environment surrounding a PBDE manufacturing plant in China

International Nuclear Information System (INIS)

Xu Jie; Gao Zishen; Xian Qiming; Yu Hongxia; Feng Jianfang

2009-01-01

Polybrominated diphenyl ethers (PBDEs) were determined in muscle, liver and eggs of freshwater fishes and surface sediments from the Nongkang River in Jinhu, Jiangsu Province, China. The present study is the first to report PBDE concentrations in the freshwater environment surrounding a PBDE manufacturing plant in China. The concentrations of 13 PBDE congeners in muscle, liver and eggs of freshwater fishes ranged from < LOD to 130, < LOD to 252 and < LOD to 33.3 ng/g lipid wt, respectively, while the concentrations of 13 PBDE congeners in surface sediments from sewage outfall, upstream and downstream of the river were 52, 9.2, 7.1 ng/g organic carbon wt, respectively. Contamination by PBDEs in this area was not serious when compared with other regions of the world. A relatively high proportion of BDE-183 was found, consistent with the octa-BDE technical mixtures from the manufacturing plant by the side of the river. - The first study to report concentrations of PBDEs in the freshwater environment surrounding a PBDE manufacturing plant in China.

Safety standards, legislation and codes of practice for fuel cell manufacture and operation

Energy Technology Data Exchange (ETDEWEB)

Wilcox, C.P.

1999-07-01

This report examines safety standards, legislation and codes of practice for fuel cell manufacture and operation in the UK, Europe and internationally. Management of health and safety in the UK is discussed, and the characteristics of phosphoric acid (PAFC), proton exchange membrane (PEM), molten carbonate (MCFC), solid oxide (SOFC) fuel cells are described. Fuel cell power plant standards and manufacture in the UK, design and operational considerations, end of life disposal, automotive fuel cell system, and fuelling and vehicular concerns are explored, and standards, legislation and codes of practice are explained in the appendix.

General description and production lines of the Egyptian fuel manufacturing pilot plant

International Nuclear Information System (INIS)

Zidan, W.I.; Elseaidy, I.M.

1999-01-01

The Egyptian Fuel Manufacturing Pilot Plant, FMPP, is a new facility, producing an MTR-type fuel elements required for the Egyptian Second Research Reactor, ETRR-2, as well as other plates or elements for an external clients with the same type and enrichment percent or lower, (LEU). General description is presented. The production lines in FMPP, which begin from uranium hexaflouride (UF 6 , 19.7±0.2 % U 235 by wt), aluminum powder, and nuclear grade 6061 aluminium alloy in sheets, bars, and rods with the different heat treatments and dimensions as a raw materials, are processed through a series of the manufacturing, inspection, and quality control plan to produce the final specified MTR-type fuel elements. All these processes and the product control in each step are presented. The specifications of the final product are presented. (author)

Metabolism of Mevalonic Acid in Vegetative and Induced Plants of Xanthium strumarium.

Science.gov (United States)

Bledsoe, C S

1978-11-01

The metabolism of mevalonic acid in Xanthium strumarium L. Chicago plants was studied to determine how mevalonate was metabolized and whether metabolism was related to induction of flowering. Leaves of vegetative, photoperiodically induced, and chemically inhibited cocklebur plants were supplied with [(14)C]mevalonic acid prior to or during a 16-hour inductive dark period. Vegetative, induced, and Tris(2-diethylaminoethyl)phosphate trihydrochloride-treated plants did not differ significantly in the amount of [(14)C]mevalonic acid they absorbed, nor in the distribution of radioactivity among the leaf blade (97%), petiole (2.3%), or shoot tip (0.7%). [(14)C]Mevalonic acid was rapidly metabolized and transported out of the leaves. Possible metabolites of mevalonate were mevalonic acid phosphates and sterols. No detectable (14)C was found in gibberellins, carotenoids, or the phytol alcohol of chlorophyll. Chemically inhibited plants accumulated (14)C compounds not found in vegetative or induced plants. When ethanol extracts of leaves, petioles, and buds were chromatographed, comparisons of chromatographic patterns did not show significant differences between vegetative and induced treatments.

The Impact of Wireless Technology Feedback on Inventory Management at a Dairy Manufacturing Plant

Science.gov (United States)

Goomas, David T.

2012-01-01

Replacing the method of counting inventory from paper count sheets to that of wireless reliably reduced the elapsed time to complete a daily inventory of the storage cooler in a dairy manufacturing plant. The handheld computers delivered immediate prompts as well as auditory and visual feedback. Reducing the time to complete the daily inventory…

Case study of manufactured gas plant site remediations using thermal desorption

Energy Technology Data Exchange (ETDEWEB)

Vogel, R.G.; Hayes, T.; Slimon, K.F.; Unites, D. [Southern California Gas Company, Los Angeles, CA (United States)

1995-12-31

Southern California Gas Company (SoCal Gas) has recently remediated five of its former manufactured gas plant (MGP) sites using on-site and off-site thermal desorption. This technology has proven effective in the treatment of PAH-contaminated soils with widely variable concentrations. At two of the five sites, MGP-contaminated materials were excavated and thermally treated on site. At the other sites, MGP-contaminated materials were excavated and transported directly to an off-site thermal desorber. Much of the production was of oil-gas, giving lampblack contamination, but some coal tar was also present.

Fumaric acid: an overlooked form of fixed carbon in Arabidopsis and other plant species

International Nuclear Information System (INIS)

Chia, D.W.; Yoder, T.J.; Reiter, W.D.; Gibson, S.I.

2000-01-01

Photoassimilates are used by plants for production of energy, as carbon skeletons and in transport of fixed carbon between different plant organs. Many studies have been devoted to characterizing the factors that. regulate photoassimilate concentrations in different plant species. Most studies examining photoassimilate concentrations in C(sub 3) plants have focused on analyzing starch and soluble sugars. However, work presented here demonstrates that a number of C(sub 3) plants, including the popular model organism Arabidopsis thaliana (L.) Heynh., and agriculturally important plants, such as soybean[Glycine ma (L.) Merr.], contain significant quantities of furnaric acid. In fact, furnaric acid can accumulate to levels of several mg per g fresh weight in A-abidopsis leaves, often exceeding starch and soluble sugar levels. Furnaric acid is a component of the tricarboxylic acid cycle and, like starch and soluble sugars, can be metabolized to yield energy and carbon skeletons for production of other compounds. Fumaric acid concentrations increase with plant age and light intensity in Arabidopsis leaves. Arabidopsis phloem exudates contain significant quantities of fumaric acid, raising the possibility that fumaric acid may function in carbon transport

Fumaric acid: an overlooked form of fixed carbon in Arabidopsis and other plant species

Energy Technology Data Exchange (ETDEWEB)

Chia, D.W.; Yoder, T.J.; Reiter, W.D.; Gibson, S.I.

2000-10-01

Photoassimilates are used by plants for production of energy, as carbon skeletons and in transport of fixed carbon between different plant organs. Many studies have been devoted to characterizing the factors that. regulate photoassimilate concentrations in different plant species. Most studies examining photoassimilate concentrations in C{sub 3} plants have focused on analyzing starch and soluble sugars. However, work presented here demonstrates that a number of C{sub 3} plants, including the popular model organism Arabidopsis thaliana (L.) Heynh., and agriculturally important plants, such as soybean [Glycine ma (L.) Merr.], contain significant quantities of furnaric acid. In fact, furnaric acid can accumulate to levels of several mg per g fresh weight in A-abidopsis leaves, often exceeding starch and soluble sugar levels. Furnaric acid is a component of the tricarboxylic acid cycle and, like starch and soluble sugars, can be metabolized to yield energy and carbon skeletons for production of other compounds. Fumaric acid concentrations increase with plant age and light intensity in Arabidopsis leaves. Arabidopsis phloem exudates contain significant quantities of fumaric acid, raising the possibility that fumaric acid may function in carbon transport.

Direct effect of acid rain on leaf chlorophyll content of terrestrial plants in China.

Science.gov (United States)

Du, Enzai; Dong, Dan; Zeng, Xuetong; Sun, Zhengzhong; Jiang, Xiaofei; de Vries, Wim

2017-12-15

Anthropogenic emissions of acid precursors in China have resulted in widespread acid rain since the 1980s. Although efforts have been made to assess the indirect, soil mediated ecological effects of acid rain, a systematic assessment of the direct foliage injury by acid rain across terrestrial plants is lacking. Leaf chlorophyll content is an important indicator of direct foliage damage and strongly related to plant productivity. We synthesized data from published literature on experiments of simulated acid rain, by directly exposing plants to acid solutions with varying pH levels, to assess the direct effect of acid rain on leaf chlorophyll content across 67 terrestrial plants in China. Our results indicate that acid rain substantially reduces leaf chlorophyll content by 6.71% per pH unit across the recorded plant species. The direct reduction of leaf chlorophyll content due to acid rain exposure showed no significant difference across calcicole, ubiquist or calcifuge species, implying that soil acidity preference does not influence the sensitivity to leaf injury by acid rain. On average, the direct effects of acid rain on leaf chlorophyll on trees, shrubs and herbs were comparable. The effects, however varied across functional groups and economic use types. Specifically, leaf chlorophyll content of deciduous species was more sensitive to acid rain in comparison to evergreen species. Moreover, vegetables and fruit trees were more sensitive to acid rain than other economically used plants. Our findings imply a potential production reduction and economic loss due to the direct foliage damage by acid rain. Copyright © 2017 Elsevier B.V. All rights reserved.

Research and Application of Lipoic Acid in Plants

Science.gov (United States)

Xiao, Renjie; Wang, Xiran; Jiang, Leiyu; Tang, Haoru

2018-01-01

Lipoic acid is a kind of small molecular compound with strong oxidizing properties. It has been widely used in medicine and has achieved good results since its discovery. However, it is less used in plants, and the biosynthetic pathway is not clear. The content in the plant is mainly measured by high-performance liquid chromatography(HPLC). At present, it is mainly used as an additive to the culture medium for plant tissue culture and Agrobacterium-mediated plant genetic transformation, in order to reduce the browning rate of explants, improve Agrobacterium-mediated genetic transformation efficiency.

Wet precipitators for sulphuric acid plants

International Nuclear Information System (INIS)

Ojanpera, R.O.

1989-01-01

Both the service requirements and design construction details have changed considerably in recent years for wet electrostatic precipitators as used for gas cleaning ahead of metallurgical sulphuric acid plants. Increased concern over acid quality has resulted in more emphasis on dust efficiencies compared to collection of acid mist. Also, higher static operating pressures have caused large structural loads on casing and internal components. In this paper these two issues are addressed in the following ways: Recognition that all dusts do not collect similarly. The mechanism by which various dusts collect affect the design of the entire wet gas cleaning system. Use of both traditional and newer materials of construction to accommodate the higher design pressures while still maintaining corrosion resistance

40 CFR 52.222 - Negative declarations.

Science.gov (United States)

2010-07-01

..., Utility Boilers, Cement Manufacturing Plants, Glass Manufacturing Plants, and Iron and Steel Manufacturing... Pollution Control District. (i) Nitric and Adipic Acid Manufacturing Plants, Cement Manufacturing Plants... Adipic Acid Manufacturing Plants, Utility Boilers, Cement Manufacturing Plants, Glass Manufacturing...

Manufacture of uranium compounds for research reactors fuel elements. Participation of the UCPP (Uranium compound production plant) in the Egyptian project

International Nuclear Information System (INIS)

Boero, Norma L.; Cinat, Enrique; Yorio, Daniel; Cincotta, Daniel; Ramella, Jose L.; Bruno, Hernan R.; Camacho, Esteban F.; Pertossi, Fernando; Panunzio, Leonardo D.; Fernandez, Carlos A.; Sassone, Ariel

1999-01-01

UCPP is an international qualified supplier of U 3 O 8 with up to 20 % enrichment in U-235. The characteristics of this powder are those specified for fuel plates manufacture for test reactors. This paper describes the works performed in the plant since its beginning, emphasising those undertaken during the last years. The transference of U 3 O 8 manufacturing technology to INVAP SE, the enterprise that installed a plant of similar characteristics in the Arabian Republic of Egypt, is especially described. (author)

The impact of acid soil volume of reclaimed minespoils on plant growth in minilysimeters

International Nuclear Information System (INIS)

Shahandeh, H.; Hossner, L.R.; Birkhead, J.A.

1996-01-01

Limited data are available to assess the influence of randomly distributed acid soil, produced from acid forming materials (AFM), on growth and productivity of crops. This study evaluated the effect of amount and volume of acid soil on the growth of an acid tolerant plant (Coastal bermudga grass, Cynodon dactylon, L.) and an acid intolerant plant (Yuchi arrowleaf clover, Trifolium vesiculosum, Savi) in greenhouse lysimeters. Acid soil (pH=2.5) volumes up to 20% for Yuchi arrowleaf clover and up to 40% for Coastal bermuda grass did not significantly decrease dry matter yield. Concentrations of Al and Mn in plant tissue of clover and bermudagrass were below the toxicity level. In the presence of randomly distributed acid soil, plant roots continued to elongate in non-acid soil, by evading localized areas of low soil pH. These results suggest that the federally mandated zero tolerance for AFM in the top 1.2 m of reclaimed lands may not be reasonable. 18 refs., 7 figs., 2 tabs

Toxicity and tolerance of aluminum in plants: tailoring plants to suit to acid soils.

Science.gov (United States)

Sade, Hemalatha; Meriga, Balaji; Surapu, Varalakshmi; Gadi, Jogeswar; Sunita, M S L; Suravajhala, Prashanth; Kavi Kishor, P B

2016-04-01

Aluminum (Al) stress is one of the serious limiting factors in plant productivity in acidic soils, which constitute about 50 % of the world's potentially arable lands and causes anywhere between 25 and 80 % of yield losses depending upon the species. The mechanism of Al toxicity and tolerance has been examined in plants, which is vital for crop improvement and enhanced food production in the future. Two mechanisms that facilitate Al tolerance in plants are Al exclusion from the roots and the ability to tolerate Al in the symplast or both. Although efforts have been made to unravel Al-resistant factors, many aspects remain unclear. Certain gene families such as MATE, ALMT, ASR, and ABC transporters have been implicated in some plants for resistance to Al which would enhance the opportunities for creating crop plants suitable to grow in acidic soils. Though QTLs have been identified related to Al-tolerance, no crop plant that is tolerant to Al has been evolved so far using breeding or molecular approaches. The remarkable changes that plants experience at the physiological, biochemical and molecular level under Al stress, the vast array of genes involved in Al toxicity-tolerance, the underlying signaling events and the holistic image of the molecular regulation, and the possibility of creating transgenics for Al tolerance are discussed in this review.

Metabolism of Mevalonic Acid in Vegetative and Induced Plants of Xanthium strumarium 1

Science.gov (United States)

Bledsoe, Caroline S.; Ross, Cleon W.

1978-01-01

The metabolism of mevalonic acid in Xanthium strumarium L. Chicago plants was studied to determine how mevalonate was metabolized and whether metabolism was related to induction of flowering. Leaves of vegetative, photoperiodically induced, and chemically inhibited cocklebur plants were supplied with [14C]mevalonic acid prior to or during a 16-hour inductive dark period. Vegetative, induced, and Tris(2-diethylaminoethyl)phosphate trihydrochloride-treated plants did not differ significantly in the amount of [14C]mevalonic acid they absorbed, nor in the distribution of radioactivity among the leaf blade (97%), petiole (2.3%), or shoot tip (0.7%). [14C]Mevalonic acid was rapidly metabolized and transported out of the leaves. Possible metabolites of mevalonate were mevalonic acid phosphates and sterols. No detectable 14C was found in gibberellins, carotenoids, or the phytol alcohol of chlorophyll. Chemically inhibited plants accumulated 14C compounds not found in vegetative or induced plants. When ethanol extracts of leaves, petioles, and buds were chromatographed, comparisons of chromatographic patterns did not show significant differences between vegetative and induced treatments. ImagesFig. 1 PMID:16660583

Manufacturing economics of plant-made biologics: case studies in therapeutic and industrial enzymes.

Science.gov (United States)

Tusé, Daniel; Tu, Tiffany; McDonald, Karen A

2014-01-01

Production of recombinant biologics in plants has received considerable attention as an alternative platform to traditional microbial and animal cell culture. Industrially relevant features of plant systems include proper eukaryotic protein processing, inherent safety due to lack of adventitious agents, more facile scalability, faster production (transient systems), and potentially lower costs. Lower manufacturing cost has been widely claimed as an intuitive feature of the platform by the plant-made biologics community, even though cost information resides within a few private companies and studies accurately documenting such an advantage have been lacking. We present two technoeconomic case studies representing plant-made enzymes for diverse applications: human butyrylcholinesterase produced indoors for use as a medical countermeasure and cellulases produced in the field for the conversion of cellulosic biomass into ethanol as a fuel extender. Production economics were modeled based on results reported with the latest-generation expression technologies on Nicotiana host plants. We evaluated process unit operations and calculated bulk active and per-dose or per-unit costs using SuperPro Designer modeling software. Our analyses indicate that substantial cost advantages over alternative platforms can be achieved with plant systems, but these advantages are molecule/product-specific and depend on the relative cost-efficiencies of alternative sources of the same product.

Manufacturing Economics of Plant-Made Biologics: Case Studies in Therapeutic and Industrial Enzymes

Directory of Open Access Journals (Sweden)

Daniel Tusé

2014-01-01

Full Text Available Production of recombinant biologics in plants has received considerable attention as an alternative platform to traditional microbial and animal cell culture. Industrially relevant features of plant systems include proper eukaryotic protein processing, inherent safety due to lack of adventitious agents, more facile scalability, faster production (transient systems, and potentially lower costs. Lower manufacturing cost has been widely claimed as an intuitive feature of the platform by the plant-made biologics community, even though cost information resides within a few private companies and studies accurately documenting such an advantage have been lacking. We present two technoeconomic case studies representing plant-made enzymes for diverse applications: human butyrylcholinesterase produced indoors for use as a medical countermeasure and cellulases produced in the field for the conversion of cellulosic biomass into ethanol as a fuel extender. Production economics were modeled based on results reported with the latest-generation expression technologies on Nicotiana host plants. We evaluated process unit operations and calculated bulk active and per-dose or per-unit costs using SuperPro Designer modeling software. Our analyses indicate that substantial cost advantages over alternative platforms can be achieved with plant systems, but these advantages are molecule/product-specific and depend on the relative cost-efficiencies of alternative sources of the same product.

The Expedited Remedial Action Program: A case study. The Alhambra Front Street manufactured gas plant site

Energy Technology Data Exchange (ETDEWEB)

Padleschat, J.A.; McMahon, T.D.

1996-12-31

Early in 1995, the Department of Toxic Substances Control asked Southern California Gas Company (SoCalGas) to enter one of its manufactured gas plant (MGP) sites into the new Expedited Remedial Action Program (ERAP). SoCalGas initially was not enthusiastic about the new program. Nevertheless, SoCalGas submitted an application for its Alhambra MGP site to be selected for the ERAP. The Alhambra Site was accepted into ERAP in November 1995, and was the first ERAP site to have orphan shares. MGP sites are well suited to the ERAP. They often involve few potentially responsible parties and can be expected to have the same primary contaminants: polycyclic aromatic hydrocarbons (PAH), which are a byproduct of the gas manufacturing process, and petroleum hydrocarbons from the crude oil feedstock used to manufacture the gas.

The influence of humic acids derived from earthworm-processed organic wastes on plant growth

Energy Technology Data Exchange (ETDEWEB)

Atiyeh, R.M.; Lee, S.; Edwards, C.A.; Arancon, N.Q.; Metzger, J.D. [Ohio State University, Columbus, OH (United States). Soil Ecology Lab.

2002-08-01

Some effects of humic acids, formed during the breakdown of organic wastes by earthworms (vermicomposting), on plant growth were evaluated. In the first experiment, humic acids were extracted from pig manure vermicompost using the classic alkali/acid fractionation procedure and mixed with a soilless container medium (Metro-Mix 360), to provide a range of 0, 50, 100, 150, 200, 250, 500, 1000, 2000 and 4000 mg of humate per kg of dry weight of container medium, and tomato seedlings were grown in the mixtures. In the second experiment, humates extracted from pig manure and food wastes vermicomposts were mixed with vermiculite to provide a range of 0, 50, 125, 250, 500, 1000 and 4000 mg of humate per kg of dry weight of the container medium, and cucumber seedlings were grown in the mixtures. Both tomato and cucumber seedlings were watered daily with a solution containing all nutrients required to ensure that any differences in growth responses were not nutrient-mediated. The incorporation of both types of vermicompost-derived humic acids, into either type of soilless plant growth media, increased the growth of tomato and cucumber plants significantly, in terms of plant heights, leaf areas, shoot and root dry weights. Plant growth increased with increasing concentrations of humic acids incorporated into the medium up to a certain proportion, but this differed according to the plant species, the source of the vermicompost, and the nature of the container medium. Plant growth tended to be increased by treatments of the plants with 50-500 mg/kg humic acids, but often decreased significantly when the concentrations of humic acids derived in the container medium exceeded 500-1000 mg/kg. These growth responses were most probably due to hormone-like activity of humic acids from the vermicomposts or could have been due to plant growth hormones adsorbed onto the humates. (author)

Phosphatidic acid: a multifunctional stress-signalling lipid in plants.

NARCIS (Netherlands)

Testerink, C.; Munnik, T.

2005-01-01

Phosphatidic acid (PA) has only recently been identified as an important signaling molecule in both plants and animals. Nonetheless, it already promises to rival the importance of the classic second messengers Ca(2+) and cAMP. In plants, its formation is triggered in response to various biotic and

Features of fatty acid synthesis in higher plants

Energy Technology Data Exchange (ETDEWEB)

Yamada, M [Tokyo Univ. (Japan). Coll. of General Education; Nakamura, Y

1975-07-01

In the biosynthesis of fatty acid in the presence of /sup 3/H/sub 2/O, /sup 3/H is incorporated into the hydrocarbon chain of the fatty acid. The features in the fatty acid synthesis of higher plants were investigated by applying /sup 3/H/sub 2/O method to the measurement of the ability of spinach leaves synthesizing fatty acid. Sucrose, acetate, pyruvate, PGA, PEP, OAA, citrate, etc. were employed as the substrates of fatty acid synthesis to trace the process of synthesis of each fatty acid. The demand of various cofactors related to the ability of spinach chloroplast fatty acid synthesizing was also examined. Light dependence of the fatty acid synthesis of chloroplast as well as the influences of N,N'-dicyclohexyl carbodiimide, carbonylcyanide-4-trifluoromethoxy phenyl hydrazone and NH/sub 4/Cl were discussed. The results were compared with the reports on the fatty acid synthesis of avocado pear, castor bean, etc.

Methods for extraction and determination of phenolic acids in medicinal plants: a review.

Science.gov (United States)

Arceusz, Agnieszka; Wesolowski, Marek; Konieczynski, Pawel

2013-12-01

Phenolic acids constitute a group of potentially immunostimulating compounds. They occur in all medicinal plants and are widely used in phytotherapy and foods of plant origin. In recent years, phenolic acids have attracted much interest owing to their biological functions. This paper reviews the extraction and determination methods of phenolic acids in medicinal plants over the last 10 years. Although Soxhlet extraction and ultrasonic assisted extraction (UAE) are commonly used for the extraction of phenolic acids from plant materials, alternative techniques such as supercritical fluid extraction (SFE), and accelerated solvent extraction (ASE) can also be used. After extraction, phenolic acids are determined usually by liquid chromatography (LC) owing to the recent developments in this technique, especially when it is coupled with mass spectrometry (MS). Also detection systems are discussed, including UV-Vis, diode array, electrochemical and fluorimetric. Other popular techniques for the analysis of this group of secondary metabolites are gas chromatography coupled with mass spectrometry (GC-MS) and capillary electrophoresis (CE).

The impact of acid soil volume of reclaimed minespoils on plant growth in minilysimeters

Energy Technology Data Exchange (ETDEWEB)

Shahandeh, H.; Hossner, L.R.; Birkhead, J.A. [Texas A & M University, College Station, TX (United States). College of Agriculture and Life Science

1996-06-01

Limited data are available to assess the influence of randomly distributed acid soil, produced from acid forming materials (AFM), on growth and productivity of crops. This study evaluated the effect of amount and volume of acid soil on the growth of an acid tolerant plant (Coastal bermudga grass, {ital Cynodon dactylon}, L.) and an acid intolerant plant (Yuchi arrowleaf clover, {ital Trifolium vesiculosum}, Savi) in greenhouse lysimeters. Acid soil (pH=2.5) volumes up to 20% for Yuchi arrowleaf clover and up to 40% for Coastal bermuda grass did not significantly decrease dry matter yield. Concentrations of Al and Mn in plant tissue of clover and bermudagrass were below the toxicity level. In the presence of randomly distributed acid soil, plant roots continued to elongate in non-acid soil, by evading localized areas of low soil pH. These results suggest that the federally mandated zero tolerance for AFM in the top 1.2 m of reclaimed lands may not be reasonable. 18 refs., 7 figs., 2 tabs.

Hexanoic acid is a resistance inducer that protects tomato plants against Pseudomonas syringae by priming the jasmonic acid and salicylic acid pathways.

Science.gov (United States)

Scalschi, Loredana; Vicedo, Begonya; Camañes, Gemma; Fernandez-Crespo, Emma; Lapeña, Leonor; González-Bosch, Carmen; García-Agustín, Pilar

2013-05-01

Hexanoic acid-induced resistance (Hx-IR) is effective against several pathogens in tomato plants. Our study of the mechanisms implicated in Hx-IR against Pseudomonas syringae pv. tomato DC3000 suggests that hexanoic acid (Hx) treatment counteracts the negative effect of coronatine (COR) and jasmonyl-isoleucine (JA-Ile) on the salicylic acid (SA) pathway. In Hx-treated plants, an increase in the expression of jasmonic acid carboxyl methyltransferase (JMT) and the SA marker genes PR1 and PR5 indicates a boost in this signalling pathway at the expense of a decrease in JA-Ile. Moreover, Hx treatment potentiates 12-oxo-phytodienoic acid accumulation, which suggests that this molecule might play a role per se in Hx-IR. These results support a positive relationship between the SA and JA pathways in Hx-primed plants. Furthermore, one of the mechanisms of virulence mediated by COR is stomatal re-opening on infection with P. syringae. In this work, we observed that Hx seems to inhibit stomatal opening in planta in the presence of COR, which suggests that, on infection in tomato, this treatment suppresses effector action to prevent bacterial entry into the mesophyll. © 2012 BSPP AND BLACKWELL PUBLISHING LTD.

The Effects of Property, Plant and Equipment (TAS 16 Standard on Cost of Sales of Manufacturing Companies

Directory of Open Access Journals (Sweden)

İlker KIYMETLİ ŞEN

2013-06-01

Full Text Available According to the Turkish Commercial Code that came into force in July 2012, the all capital companies that meet the criteria described by the Council of Ministers are required to be in compliance with accounting and financial reporting standards published by the Public Oversight, Accounting and Auditing Board. There are several differences between the local accounting regulations and the standards in terms of valuation, computation and presentation. These differences also affect the cost of sales of the companies that result in differences in the calculation of costs of goods manufactured. The purpose of this study is to examine and demonstrate the potential effects of the TAS 16 Property, Plant and Equipment on calculations of manufacturing costs and the cost of sales of manufacturing companies.

Rapsodie first core manufacture. 1. part: processing plant

International Nuclear Information System (INIS)

Masselot, Y.; Bataller, S.; Ganivet, M.; Guillet, H.; Robillard, A.; Stosskopf, F.

1968-01-01

This report is the first in a series of three describing the processes, results and peculiar technical problems related to the manufacture of the first core of the fast reactor Rapsodie. A detailed study of manufacturing processes(pellets, pins, fissile sub-assemblies), the associated testings (raw materials, processed pellets and pins, sub-assemblies before delivery), manufacturing facilities and improvements for a second campaign are described. (author) [fr

Computer-assisted nuclear fuel manufacture

International Nuclear Information System (INIS)

Maloney, J.P.; Schaumann, S.M.; Stone, E.

1976-01-01

At the ERDA Savannah River Plant, a process monitor, which incorporates an online digital computer, assists in manufacturing fuel elements used to produce nuclides such as plutonium, tritium, and californium in the plant's nuclear reactors. Also, inventory functions assist in safeguarding fissile material and protecting against accidental nuclear criticality. Terminals at strategic locations throughout the process area enable production operators to send and receive instructions and information on each manufacturing step

[Roles of organic acid metabolism in plant adaptation to nutrient deficiency and aluminum toxicity stress].

Science.gov (United States)

Wang, Jianfei; Shen, Qirong

2006-11-01

Organic acids not only act as the intermediates in carbon metabolism, but also exert key roles in the plant adaptation to nutrient deficiency and metal stress and in the plant-microbe interactions at root-soil interface. From the viewpoint of plant nutrition, this paper reviewed the research progress on the formation and physiology of organic acids in plant, and their functions in nitrogen metabolism, phosphorus and iron uptake, aluminum tolerance, and soil ecology. New findings in the membrane transport of organic acids and the biotechnological manipulation of organic acids in transgenic model were also discussed. This novel perspectives of organic acid metabolism and its potential manipulation might present a possibility to understand the fundamental aspects of plant physiology, and lead to the new strategies to obtain crop varieties better adapted to environmental and metal stress.

How to eliminate the formation of chlorogenic acids artefacts during plants analysis? Sea sand disruption method (SSDM) in the HPLC analysis of chlorogenic acids and their native derivatives in plants.

Science.gov (United States)

Wianowska, Dorota; Typek, Rafał; Dawidowicz, Andrzej L

2015-09-01

The analytical procedures for determining plant constituents involve the application of sample preparation methods to fully isolate and/or pre-concentrate the analyzed substances. High-temperature liquid extraction is still applied most frequently for this purpose. The present paper shows that high-temperature extraction cannot be applied for the analysis of chlorogenic acids (CQAs) and their derivatives in plants as it causes the CQAs transformation leading to erroneous quantitative estimations of these compounds. Experiments performed on different plants (black elder, hawthorn, nettle, yerba maté, St John's wort and green coffee) demonstrate that the most appropriate method for the estimation of CQAs/CQAs derivatives is sea sand disruption method (SSDM) because it does not induce any transformation and/or degradation processes in the analyzed substances. Owing to the SSDM method application we found that the investigated plants, besides four main CQAs, contain sixteen CQAs derivatives, among them three quinic acids. The application of SSDM in plant analysis not only allows to establish a true concentration of individual CQAs in the examined plants but also to determine which chlorogenic acids derivatives are native plant components and what is their concentration level. What is even more important, the application of SSDM in plant analysis allows to eliminate errors that may arise or might have arisen in the study of chlorogenic acids and their derivatives in plant metabolism. Copyright © 2015 Elsevier Ltd. All rights reserved.

EXPLORING LINKAGES BETWEEN MANUFACTURING FUNCTIONS, OPERATIONS PRIORITIES AND PLANT PERFORMANCE IN MANUFACTURING SMES IN MUMBAI

Directory of Open Access Journals (Sweden)

B.E. Narkhede

2012-03-01

Full Text Available Nowadays, in order for small and medium scale enterprises to excel in performance, it is necessary to have congruency among the manufacturing functions and the operational priorities. In this paper a model is presented to know the relationship between the manufacturing functions, operation priorities and manufacturing performance. Using data collected from small and medium scale manufacturing enterprises in Mumbai and suburban region, this study examines the seven hypothesis based on the relationship between manufacturing functions, priorities and perfomance. The structural equation model is tested using Amos7 software to test the hypothesis. The results show that there exists a positive relation between manufacturing functions and operation priorities as four out of six the dimensions measured such as Process control and implementation, Management of resources, Management of people, and Partnership with supplier are positively related, while two dimensions Training and developing and Teamwork are not positively related. Findings also support strong impact of operation priorities with growth in productivity as a measure of performance.

The logistics and the supply chain in the Juzbado Nuclear Fuel Manufacturing Plant; Cadena logistica en la fabrica de elementos combustibles de Juzbado

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The paper describe the logistics and the supply chain in the Juzbado Nuclear Fuel Manufacturing Plant, located in Juzbado in the province of Salamanca. In the the article are described the principal elements in the supply chain and the difficulties of its management derived from the short period for the manufacturing of the nuclear fuel. It's also given a view in relation to the transportation by land sea of the nuclear components, uranium oxide powder and the manufactured fuel. The characteristics of the supply chain are determined by the plant production forecast, by the origin and high technology of the raw materials and by nuclear fuel delivery site locations. (Author)

Good and bad protons: genetic aspects of acidity stress responses in plants.

Science.gov (United States)

Shavrukov, Yuri; Hirai, Yoshihiko

2016-01-01

Physiological aspects of acidity stress in plants (synonymous with H(+) rhizotoxicity or low-pH stress) have long been a focus of research, in particular with respect to acidic soils where aluminium and H(+) rhizotoxicities often co-occur. However, toxic H(+) and Al(3+) elicit different response mechanisms in plants, and it is important to consider their effects separately. The primary aim of this review was to provide the current state of knowledge regarding the genetics of the specific reactions to low-pH stress in growing plants. A comparison of the results gleaned from quantitative trait loci analysis and global transcriptome profiling of plants in response to high proton concentrations revealed a two-stage genetic response: (i) in the short-term, proton pump H(+)-ATPases present the first barrier in root cells, allocating an excess of H(+) into either the apoplast or vacuole; the ensuing defence signaling system involves auxin, salicylic acid, and methyl jasmonate, which subsequently initiate expression of STOP and DREB transcription factors as well as chaperone ROF; (2) the long-term response includes other genes, such as alternative oxidase and type II NAD(P)H dehydrogenase, which act to detoxify dangerous reactive oxygen species in mitochondria, and help plants better manage the stress. A range of transporter genes including those for nitrate (NTR1), malate (ALMT1), and heavy metals are often up-regulated by H(+) rhizotoxicity. Expansins, cell-wall-related genes, the γ-aminobutyric acid shunt and biochemical pH-stat genes also reflect changes in cell metabolism and biochemistry in acidic conditions. However, the genetics underlying the acidity stress response of plants is complicated and only fragmentally understood. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Metabolism of 2-deoxyglyconic acid in plants and bakers yeast

International Nuclear Information System (INIS)

Gakhokidze, R.A.; Beriashvili, L.T.; Chigvinadze, T.D.

1996-01-01

During photosynthesis in Phaseolus vulgaris haricot bean and Zea mays leaves, assimilated carbon 14 CO 2 is rapidly incorporated into aldonic acids including 2-deoxygluconic acid whose radioactivity was relatively high. In these plants, radioactive carbon of 2-deoxy-D-gluconic acid prepared from 1-6 14 C-D-glucose is actively involved in the formation of sugars, organic acids, and amino acids. In baking yeast Saccharomyces cerevisiae, the rate of respiration-dependent oxidation of 2-deoxy-D-gluconic acid differs versus the rate of D-glucose oxidation [ru

Computer-assisted nuclear fuel manufacture

International Nuclear Information System (INIS)

Maloney, J.P.; Schaumann, C.M.; Stone, E.

1976-06-01

At the ERDA Savannah River Plant, a process monitor, which incorporates an online digital computer, assists in manufacturing fuel elements used to produce nuclides such as plutonium, tritium, and californium in the plant's nuclear reactors. Also, inventory functions assist in safeguarding fissile material and protecting against accidental nuclear criticality. Terminals at strategic locations throughout the process area enable production operators to send and receive instructions and information on each manufacturing step. 11 fig

Gamma amino butyric acid accumulation in medicinal plants without stress.

Science.gov (United States)

Anju, P; Moothedath, Ismail; Rema Shree, Azhimala Bhaskaranpillai

2014-01-01

Gamma amino butyric acid (GABA) is an important ubiquitous four carbon nonprotein amino acid with an amino group attached to gamma carbon instead of beta carbon. It exists in different organisms including bacteria, plants, and animals and plays a crucial role in humans by regulating neuronal excitability throughout the nervous system. It is directly responsible for the regulation of muscle tone and also effective in lowering stress, blood pressure, and hypertension. The aim of the study was to develop the fingerprint profile of selected medicinally and economically important plants having central nervous system (CNS) activity and to determine the quantity of GABA in the selected plants grown under natural conditions without any added stress. The high-performance thin layer chromatography analysis was performed on precoated silica gel plate 60F-254 plate (20 cm × 10 cm) in the form of bands with width 8 mm using Hamilton syringe (100 μl) using n-butanol, acetic acid, and water in the proportion 5:2:2 as mobile phase in a CAMAG chamber which was previously saturated for 30 min. CAMAG TLC scanner 3 was used for the densitometric scanning at 550 nm. Specific marker compounds were used for the quantification. Among the screened medicinal plants, Zingiber officinale and Solanum torvum were found to have GABA. The percentage of GABA present in Z. officinale and S. torvum were found to be 0.0114% and 0.0119%, respectively. The present work confirmed that among the selected CNS active medicinal plants, only two plants contain GABA. We found a negative correlation with plant having CNS activity and accumulation of GABA. The GABA shunt is a conserved pathway in eukaryotes and prokaryotes but, although the role of GABA as a neurotransmitter in mammals is clearly established, its role in plants is still vague.

Possibilities of the metallurgical base in the manufacture of tubes for nuclear power plant steam generators

International Nuclear Information System (INIS)

Prnka, T.; Walder, V.; Dolenek, J.

Current possibilities are briefly summarized of metallurgy in the manufacture of high-quality tubes for nuclear power plant steam generators, mainly for fast reactor power plants. Discussed are steel making possibilities, semi-finished product and tube forming with special regard to 2.25Cr1MoNiNb steel problems, heat treatment, finishing, and testing. Necessary equipment and technology for the production of steam generator tubes are less common in the existing practice and are demanding on investment; their introduction, however, is inevitable for securing quality production of steam generator tubes. (Kr)

Procedure for the qualification of a manufacturer of ingot iron pieces for application in nuclear power plant components

International Nuclear Information System (INIS)

Rahn, K.M.M.; Jusevicius, E.; Michael, H.

1981-01-01

The process for the qualification of 'Sao Caetano do Sul (Acos Villares S/A)' Plant as manufacturers of ingot iron pieces for application in components of Angra 2 and Angra 3 Nuclear Power Plants, is presented. The qualification was executed by IBQN - Instituto Brasileiro de Qualidade Nuclear - the organ officially in charge of the execution of qualification of suppliers of materials for the nuclear industry. (E.G.) [pt

Studies to overcome the manufacturing problems in blast furnace tap hole clay of Integrated Steel Plants: Experimental approach

Science.gov (United States)

Siva kumar, R.; Mohammed, Raffi; Srinivasa Rao, K.

2018-03-01

Integrated Steel Plants commonly uses Blast Furnace route for iron production which accounts for over 60 % of the world iron output. Blast Furnace runs for ten to twenty years without repairing hearth walls and Tap Hole (TH). Tap hole is an outlet for hot metal produced in a Blast Furnace and run from the shell of the furnace into the interior allowing access to the molten material. Tapping is the term used for drilling a hole through the tap hole which allows the molten iron and slag to flow out. In Iron making process, removal of liquid iron from furnace and sending it for steel making is known as cast house practice. For tapping liquid iron and operating the tap hole requires a special type of clay. Tap hole clay (THC) used to stop the flow of liquid iron and slag from the blast furnace. Present work deals with the study on manufacturing of THC at Visakhapatnam Steel Plant and problems related to manufacturing. Experiments were conducted to solve the identified problems and results are furnished in detail. The findings can improve the manufacturing process and improve the productivity of tap hole clay.

Physicochemical properties, fatty acid profile and sensory characteristics of sheep and goat meat sausages manufactured with different pork fat levels.

Science.gov (United States)

Leite, Ana; Rodrigues, Sandra; Pereira, Etelvina; Paulos, Kátia; Oliveira, António Filipe; Lorenzo, José Manuel; Teixeira, Alfredo

2015-07-01

The effect of three pork backfat levels (0% vs. 10% vs. 30%) on chemical composition, fatty acid profile and sensory properties on sheep and goat meat sausages was studied. All physicochemical parameters were affected by the addition of pork backfat in both types of sausages. Sausages manufactured with 30% of pork backfat showed the lowest moisture and protein contents and the highest total fat content. The lower a(w) values in sausages manufactured with higher fat content while in pH happened the reverse situation. The addition of pork backfat modified the total fatty acid profile, prompting a significant drop in the relative percentages of C14:0, C16:0, C17:0, C17:1, C18:0 and TVA (trans-vaccenic acid), together with a marked increase in oleic and linoleic acids. Finally, in goat sausages, the fat content significantly affected sensory parameters: taste, texture and overall acceptability (P<0.05). As expected, all physicochemical parameters were affected by the addition of pork backfat in both types of sausages. Copyright © 2015 Elsevier Ltd. All rights reserved.

27 CFR 19.471 - Manufacture of articles.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Manufacture of articles..., DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Denaturing Operations and Manufacture of Articles Articles § 19.471 Manufacture of articles. Proprietors shall manufacture, label, mark, and dispose of...

Radionuclide fluxes at a plant manufacturing dicalcium phosphate for domestic animals

International Nuclear Information System (INIS)

Gaefvert, T.; Holm, E.

2002-01-01

The objectives of this study is to map out the fluxes of radionuclides from the 238 U decay series as well as estimate doses to workers at a dicalcium phosphate plant. At the studied plant phosphate rock is used for the production of dicalcium phosphate, which is a source of calcium and phosphorous for domestic animals. A by-product in the manufacturing process is calcium chloride which is used in the oil industry, food industry and as road salt. In the phosphate rock, the radionuclides were found in secular radioactive equilibrium with an average activity concentration of 830 Bq·kg -1 . Separation and concentration processes was observed. Most of the 226 Ra was found in the calcium chloride while the major part of 238 U was found in the dicalcium phosphate, about 950 Bq·kg -1 . The annual occupational effective dose to workers was found to be below the 1 mSv limit. The study shows a good example of an important non-nuclear industry with a high input of natural radionuclides and several conceivable pathways to man. (author)

Biological fluidized-bed treatment of groundwater from a manufactured gas plant site

International Nuclear Information System (INIS)

Grey, G.M.; Scheible, O.K.; Maiello, J.A.; Guarini, W.J.; Sutton, P.M.

1995-01-01

Bench- and pilot-scale biological treatability studies were performed as part of a comprehensive study for developing an on-site treatment system for contaminated groundwater at a former manufactured gas plant site. The bench-scale work, which included evaluations of activated sludge and fluidized-bed biological processes, indicated that a carbon-based fluidized-bed process was most appropriate. The process was then demonstrated on a pilot level at the site. The bench and pilot studies demonstrated significant reductions of chemical oxygen demand (COD), and all target organics including polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs)

Physiologically available cyanide (PAC) in manufactured gas plant waste and soil samples

International Nuclear Information System (INIS)

Magee, B.; Taft, A.; Ratliff, W.; Kelley, J.; Sullivan, J.; Pancorbo, O.

1995-01-01

Iron-complexed cyanide compounds, such as ferri-ferrocyanide (Prussian Blue), are wastes associated with former manufactured gas plant (MGP) facilities. When tested for total cyanide, these wastes often show a high total cyanide content. Because simple cyanide salts are acutely toxic, cyanide compounds can be the subject of concern. However, Prussian Blue and related species are known to have a low order of human and animal toxicity. Toxicology data on complexed cyanides will be presented. Another issue regarding Prussian Blue and related species is that the total cyanide method does not accurately represent the amount of free cyanide released from these cyanide species. The method involves boiling the sample in an acidic solution under vacuum to force the formation of HCN gas. Thus, Prussian Blue, which is known to be low in toxicity, cannot be properly evaluated with current methods. The Massachusetts Natural Gas Council initiated a program with the Massachusetts Department of Environmental Protection to develop a method that would define the amount of cyanide that is able to be converted into hydrogen cyanide under the pH conditions of the stomach. It is demonstrated that less than 1% of the cyanide present in Prussian Blue samples and soils from MGP sites can be converted to HCN under the conditions of the human stomach. The physiologically available cyanide method has been designed to be executed at a higher temperature for one hour. It is shown that physiologically available cyanide in MGP samples is < 5--15% of total cyanide

Analysis of the status and problems of mechanical module manufacturing schedule of nuclear power plant

International Nuclear Information System (INIS)

Zhao Shuyu; Lu Qinwu; Li Yi

2014-01-01

An important feature of the 3rd generation nuclear power projects of AP1000 is the scale application of the modular design and construction technology. The world's first AP1000 project has been started in 2008 in our country, some problems existing in project construction process, such as the mechanical module manufacturing progress can't well meet the needs of the practical engineering. In this article, through investigating and analyzing the main cause of affecting plant mechanical module manufacturing progress, according to our country's actual situation in design, procurement and construction, explore the measures to improve module building progress in the process of AP1000 modular construction project at this stage, provide suggestions for project smooth implementation. (authors)

Roles of Organic Acid Anion Secretion in Aluminium Tolerance of Higher Plants

Science.gov (United States)

Yang, Lin-Tong; Qi, Yi-Ping; Jiang, Huan-Xin; Chen, Li-Song

2013-01-01

Approximately 30% of the world's total land area and over 50% of the world's potential arable lands are acidic. Furthermore, the acidity of the soils is gradually increasing as a result of the environmental problems including some farming practices and acid rain. At mildly acidic or neutral soils, aluminium(Al) occurs primarily as insoluble deposits and is essentially biologically inactive. However, in many acidic soils throughout the tropics and subtropics, Al toxicity is a major factor limiting crop productivity. The Al-induced secretion of organic acid (OA) anions, mainly citrate, oxalate, and malate, from roots is the best documented mechanism of Al tolerance in higher plants. Increasing evidence shows that the Al-induced secretion of OA anions may be related to the following several factors, including (a) anion channels or transporters, (b) internal concentrations of OA anions in plant tissues, (d) temperature, (e) root plasma membrane (PM) H+-ATPase, (f) magnesium (Mg), and (e) phosphorus (P). Genetically modified plants and cells with higher Al tolerance by overexpressing genes for the secretion and the biosynthesis of OA anions have been obtained. In addition, some aspects needed to be further studied are also discussed. PMID:23509687

Optimisation of a wet FGD pilot plant using fine limestone and organic acids

DEFF Research Database (Denmark)

Frandsen, Jan; Kiil, Søren; Johnsson, Jan Erik

2001-01-01

, but the residual limestone content in the gypsum increased to somewhere between 19 and 30 wt%, making this pH range unsuitable for use in a full-scale plant. The investigations have shown that both the addition of organic acids and the use of a limestone with a fine PSD can be used to optimise wet FGD plants. (C......The effects of adding an organic acid or using a limestone with a fine particle size distribution (PSD) have been examined in a wet flue gas desulphurisation (FGD) pilot plant. Optimisation of the plant with respect to the degree of desulphurisation and the residual limestone content of the gypsum...... has been the aim of the work. In contrast to earlier investigations with organic acids, all essential process parameters (i.e. gas phase concentration profiles of SO(2), slurry pH profiles. and residual limestone in the gypsum) were considered. Slurry concentrations of adipic acid in the range of 0...

[Process and mechanism of plants in overcoming acid soil aluminum stress].

Science.gov (United States)

Zhao, Tian-Long; Xie, Guang-Ning; Zhang, Xiao-Xia; Qiu, Lin-Quan; Wang, Na; Zhang, Su-Zhi

2013-10-01

Aluminum (Al) stress is one of the most important factors affecting the plant growth on acid soil. Currently, global soil acidification further intensifies the Al stress. Plants can detoxify Al via the chelation of ionic Al and organic acids to store the ionic Al in vacuoles and extrude it from roots. The Al extrusion is mainly performed by the membrane-localized anion channel proteins Al(3+)-activated malate transporter (ALMT) and multi-drug and toxin extrusion (MATE). The genes encoding ABC transporter and zinc-finger protein conferred plant Al tolerance have also been found. The identification of these Al-resistant genes makes it possible to increase the Al resistance of crop plants and enhance their production by the biological methods such as gene transformation and mark-associated breeding. The key problems needed to be solved and the possible directions in the researches of plant Al stress resistance were proposed.

Integrated Production-Distribution Scheduling Problem with Multiple Independent Manufacturers

Directory of Open Access Journals (Sweden)

Jianhong Hao

2015-01-01

Full Text Available We consider the nonstandard parts supply chain with a public service platform for machinery integration in China. The platform assigns orders placed by a machinery enterprise to multiple independent manufacturers who produce nonstandard parts and makes production schedule and batch delivery schedule for each manufacturer in a coordinate manner. Each manufacturer has only one plant with parallel machines and is located at a location far away from other manufacturers. Orders are first processed at the plants and then directly shipped from the plants to the enterprise in order to be finished before a given deadline. We study the above integrated production-distribution scheduling problem with multiple manufacturers to maximize a weight sum of the profit of each manufacturer under the constraints that all orders are finished before the deadline and the profit of each manufacturer is not negative. According to the optimal condition analysis, we formulate the problem as a mixed integer programming model and use CPLEX to solve it.

Role of salicylic acid in resistance to cadmium stress in plants.

Science.gov (United States)

Liu, Zhouping; Ding, Yanfei; Wang, Feijuan; Ye, Yaoyao; Zhu, Cheng

2016-04-01

We review and introduce the importance of salicylic acid in plants under cadmium stress, and provide insights into potential regulatory mechanisms for alleviating cadmium toxicity. Cadmium (Cd) is a widespread and potentially toxic environmental pollutant, originating mainly from rapid industrial processes, the application of fertilizers, manures and sewage sludge, and urban activities. It is easily taken up by plants, resulting in obvious toxicity symptoms, including growth retardation, leaf chlorosis, leaf and root necrosis, altered structures and ultrastructures, inhibition of photosynthesis, and cell death. Therefore, alleviating Cd toxicity in plants is a major aim of plant research. Salicylic acid (SA) is a ubiquitous plant phenolic compound that has been used in many plant species to alleviate Cd toxicity by regulating plant growth, reducing Cd uptake and distribution in plants, protecting membrane integrity and stability, scavenging reactive oxygen species and enhancing antioxidant defense system, improving photosynthetic capacity. Furthermore, SA functions as a signaling molecule involved in the expression of several important genes. Significant amounts of research have focused on understanding SA functions and signaling in plants under Cd stress, but several questions still remain unanswered. In this article, the influence of SA on Cd-induced stress in plants and the potential regulation mechanism for alleviating Cd toxicity are reviewed.

γ-Aminobutyric acid (GABA) signalling in plants.

Science.gov (United States)

Ramesh, Sunita A; Tyerman, Stephen D; Gilliham, Matthew; Xu, Bo

2017-05-01

The role of γ-aminobutyric acid (GABA) as a signal in animals has been documented for over 60 years. In contrast, evidence that GABA is a signal in plants has only emerged in the last 15 years, and it was not until last year that a mechanism by which this could occur was identified-a plant 'GABA receptor' that inhibits anion passage through the aluminium-activated malate transporter family of proteins (ALMTs). ALMTs are multigenic, expressed in different organs and present on different membranes. We propose GABA regulation of ALMT activity could function as a signal that modulates plant growth, development, and stress response. In this review, we compare and contrast the plant 'GABA receptor' with mammalian GABA A receptors in terms of their molecular identity, predicted topology, mode of action, and signalling roles. We also explore the implications of the discovery that GABA modulates anion flux in plants, its role in signal transduction for the regulation of plant physiology, and predict the possibility that there are other GABA interaction sites in the N termini of ALMT proteins through in silico evolutionary coupling analysis; we also explore the potential interactions between GABA and other signalling molecules.

New insights into the metabolism of aspartate-family amino acids in plant seeds.

Science.gov (United States)

Wang, Wenyi; Xu, Mengyun; Wang, Guoping; Galili, Gad

2018-02-05

Aspartate-family amino acids. Aspartate (Asp)-family pathway, via several metabolic branches, leads to four key essential amino acids: Lys, Met, Thr, and Ile. Among these, Lys and Met have received the most attention, as they are the most limiting amino acid in cereals and legumes crops, respectively. The metabolic pathways of these four essential amino acids and their interactions with regulatory networks have been well characterized. Using this knowledge, extensive efforts have been devoted to augmenting the levels of these amino acids in various plant organs, especially seeds, which serve as the main source of human food and livestock feed. Seeds store a number of storage proteins, which are utilized as nutrient and energy resources. Storage proteins are composed of amino acids, to guarantee the continuation of plant progeny. Thus, understanding the seed metabolism, especially with respect to the accumulation of aspartate-derived amino acids Lys and Met, is a crucial factor for sustainable agriculture. In this review, we summarized the Asp-family pathway, with some new examples of accumulated Asp-family amino acids, particularly Lys and Met, in plant seeds. We also discuss the recent advances in understanding the roles of Asp-family amino acids during seed development.

An example of RCCM application to exportation. Manufacture of components for 900 MW nuclear power plants in Korea

International Nuclear Information System (INIS)

Bitouzet, P.

1983-03-01

The National Korean Electricy society KEPCO ordered the KNU9 and 10 power plants from FRAMATOME. This contract involve an important fabrication of components. The KHIC society has been indicated to manufacture the main components. This paper gives some precisions about the organization of the Technical Assistance for the Korean realization of five big components (pressure vessel, steam generator, pressurizer, accumulator and injection reservoir of boron), components manufactured according to French standard, including RCC (design and construction rules). Finally, it is shown how this Technical Assistance is carried out [fr

Developments in fuel manufacturing

International Nuclear Information System (INIS)

Williams, T.

1997-01-01

BNFL has a long tradition of willingness to embrace technological challenge and a dedication to quality. This paper describes advances in the overall manufacturing philosophy at BNFL's Fuel Business Group and then covers how some new technologies are currently being employed in BNFL Fuel Business Group's flagship oxide complex (OFC), which is currently in its final stages of commissioning. This plant represents a total investment of some Pound 200 million. This paper also describes how these technologies are also being deployed in BNFL's MOX plant now being built at Sellafield and, finally, covers some new processes being developed for advanced fuel manufacture. (author)

Optimization of sodium bicarbonate injection for acid scrubbing in hospital waste incineration plant

International Nuclear Information System (INIS)

Rozainee, M.; Salleh, M.; Mutahharah, M.M.; Anwar Johari

2010-01-01

Optimization of sodium bicarbonate (NaHCO 3 ) injection for acid hydrochloric (HCl) scrubbing was conducted on a hospital waste incineration plant. The plant employs a rotary kiln system having burning capacity of 350 kg/h hospital waste (average calorific value of 17.4 MJ/kg) and is operated on a 24 hr/ day basis. Currently, NaHCO 3 injection rate is 25 kg/h as recommended by manufacturer to meet the Department of Environment (DOE) standard emission limit of 200 mg/Nm 3 HCl. Testing of HCl emission at various injection rates of 25, 20, 15 and 10 kg/ h results in HCl final concentration in the range of 0.58-7.13, 5.63-7.74, 0.07-2.99 and 3-28 mg/Nm 3 respectively. The results showed that NaHCO 3 injection rate as low as 10 kg/ h could still meet the HCl stipulated emission limit. Economic comparison between 25 and 10 kg/ h injection rates showed that total saving on NaHCO 3 and disposal of fly ash was RM 22,000 per month (equivalent to saving RM 260,000 per year) when using 10 kg/ h injection rate. It was concluded from the study that optimum injection rate would not only save cost and reduce wastage but also reduce bag house loading rate and prolong the life span of filter bags. (author)

Biosynthesis of 14C-labelled erucic acid by means of rape plants

International Nuclear Information System (INIS)

Meisgeier, G.; Eckert, H.; Mueller, H.

1991-01-01

For the biosynthetic preparation of 14 C-erucic adid (C 21 H 41 COOH) by means of rape plants cv. sollux the plants were supplied with 14 CO 2 and additionally fed with 14 C-Sodium acetate after anthesis. After saponification of the extracted lipids the erucic acid was isolated and purified. The substance was identified by gas chromatography. The incorporation of the applied radioactive (34 MBq 14 CO 2 ; 37 MBq 14 C-natrium acetate) into the fatty acids amounted to 1,2 per cent. The erucic acid could be isolated from the fatty acids mixture with a specific radioactivity of 1,001 MBq/mmol and a purity of 97,2 per cent. (orig.) [de

78 FR 15753 - Maintenance, Testing, and Replacement of Vented Lead-Acid Storage Batteries for Nuclear Power Plants

Science.gov (United States)

2013-03-12

...-Acid Storage Batteries for Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Draft...-Acid Storage Batteries for Nuclear Power Plants.'' The draft guide describes methods that the NRC staff..., testing, and replacement of vented lead-acid storage batteries in nuclear power plants. DATES: Submit...

Enhanced biodegradation of polyaromatic hydrocarbons in manufactured gas plant wastes

International Nuclear Information System (INIS)

Gauger, W.K.; Srivastava, V.J.; Hayes, T.D.; Linz, D.G.

1991-01-01

Scientists at the Institute of Gas Technology (IGT) have focused on enhancing destruction of polyaromatic hydrocarbons (PAHs) present as pollutants in manufactured gas plant (MGP) soils. The factor that bears the most restrictive influence on successful biological PAH degradation is low pollutant transfer from soil into an aqueous environment where biotreatment processes can take place. Physical and chemical enhancements were used in conjunction with biological processes. Physical enhancements overcame the mass transfer problem and made possible the biological destruction of aromatic hydrocarbons. One- to three-ring aromatic hydrocarbons were readily biodegraded in liquid, soil slurry, and - to a lesser degree - composted soil systems. Four- to six-ring PAHs remained persistent but were effectively destroyed when chemical co-treatments were used. Combined biological/chemical/physical processes are currently being tested to achieve the most extensive PAH degradation possible for MGP soils

Experimental and kinetic modelling studies on the acid-catalysed hydrolysis of the water hyacinth plant to levulinic acid

NARCIS (Netherlands)

Girisuta, B.; Danon, B.; Manurung, R.; Janssen, L. P. B. M.; Heeres, H. J.

2008-01-01

A comprehensive experimental and modelling study on the acid-catalysed hydrolysis of the water hyacinth plant (Eichhornia crassipes) to optimise the yield of levulinic acid (LA) is reported (T = 150-175 degrees C, C-H2SO4 - 0.1-1 M, water hyacinth intake = 1-5 wt%). At high acid concentrations (>

Marsh plant response to metals: Exudation of aliphatic low molecular weight organic acids (ALMWOAs)

Science.gov (United States)

Rocha, A. Cristina S.; Almeida, C. Marisa R.; Basto, M. Clara P.; Vasconcelos, M. Teresa S. D.

2016-03-01

Metal exposure is known to induce the production and secretion of substances, such as aliphatic low molecular weight organic acids (ALMWOAs), into the rhizosphere by plant roots. Knowledge on this matter is extensive for soil plants but still considerably scarce regarding marsh plants roots adapted to high salinity media. Phragmites australis and Halimione portulacoides, two marsh plants commonly distributed in European estuarine salt marshes, were used to assess the response of roots of both species, in terms of ALMWOAs exudation, to Cu, Ni and Cd exposure (isolated and in mixture since in natural environment, they are exposed to mixture of metals). As previous studies were carried out in unrealistic and synthetic media, here a more natural medium was selected. Therefore, in vitro experiments were carried out, with specimens of both marsh plants, and in freshwater contaminated with two different Cu, Ni and Cd concentrations (individual metal and in mixture). Both marsh plants were capable of liberating ALMWOAs into the surrounding medium. Oxalic, citric and maleic acids were found in P. australis root exudate solutions and oxalic and maleic acids in H. portulacoides root exudate solutions. ALMWOA liberation by both plants was plant species and metal-dependent. For instance, Cu affected the exudation of oxalic acid by H. portulacoides and of oxalic and citric acids by P. australis roots. In contrast, Ni and Cd did not stimulate any specific response. Regarding the combination of all metals, H. portulacoides showed a similar response to that observed for Cu individually. However, in the P. australis case, at high metal concentration mixture, a synergetic effect led to the increase of oxalic acid levels in root exudate solution and to a decrease of citric acid liberation. A correlation between ALMWOAs exudation and metal accumulation could not be established. P. australis and H. portulacoides are considered suitable metal phytoremediators of estuarine impacted areas

What limits production of unusual monoenoic fatty acids in transgenic plants?

Science.gov (United States)

Suh, Mi Chung; Schultz, David J; Ohlrogge, John B

2002-08-01

Unusual monounsaturated fatty acids are major constituents (greater than 80%) in seeds of Coriandrum sativum L. (coriander) and Thunbergia alata Bojer, as well as in glandular trichomes (greater than 80% derived products) of Pelargonium x hortorum (geranium). These diverged fatty acid structures are produced via distinct plastidial acyl-acyl carrier protein (ACP) desaturases. When expressed in Arabidopsis thaliana (L.) Heynh. under strong seed-specific promoters the unusual acyl-ACP desaturases resulted in accumulation of unusual monoene fatty acids at 1-15% of seed fatty acid mass. In this study, we have examined several factors that potentially limit higher production of unusual monoenes in transgenic oilseeds. (i) Immunoblots indicated that the introduced desaturases were expressed at levels equivalent to or higher than the endogenous delta9 18:0-ACP desaturase. However, the level of unusual fatty acid produced in transgenic plants was not correlated with the level of desaturase expression. (ii) The unusual desaturases were expressed in several backgrounds, including antisense 18:0-ACP desaturase plants, in fab1 mutants, and co-expressed with specialized ACP or ferredoxin isoforms. None of these experiments led to high production of expected products. (iii) No evidence was found for degradation of the unusual fatty acids during seed development. (iv) Petroselinic acid added to developing seeds was incorporated into triacylglycerol as readily as oleic acid, suggesting no major barriers to its metabolism by enzymes of glycerolipid assembly. (v) In vitro and in situ assay of acyl-ACP desaturases revealed a large discrepancy of activity when comparing unusual acyl-ACP desaturases with the endogenous delta9 18:0-ACP desaturase. The combined results, coupled with the sensitivity of acyl-ACP desaturase activity to centrifugation and low salt or detergent suggests low production of unusual monoenes in transgenic plants may be due to the lack of, or incorrect assemble of

Relational Inequality: Gender Earnings Inequality in U.S. and Japanese Manufacturing Plants in the Early 1980s

Science.gov (United States)

Avent-Holt, Dustin; Tomaskovic-Devey, Donald

2012-01-01

We examine the relational model of inequality using samples of employer-employee matched data from manufacturing plants in the United States and Japan. We argue that gender is a salient status characteristic in both the United States and Japan, but because of differences in gender politics, wage inequality will vary more across U.S. workplaces…

Controlling plant architecture by manipulation of gibberellic acid signalling in petunia

Science.gov (United States)

Gibberellic acid (GA), a plant hormone, regulates many crucial growth and developmental processes, including seed germination, leaf expansion, induction of flowering and stem elongation. A common problem in the production of ornamental potted plants is undesirably tall growth, so inhibitors of gibbe...

Amino acid-sensing ion channels in plants

Energy Technology Data Exchange (ETDEWEB)

Spalding, Edgar P. [Univ. of Wisconsin, Madison, WI (United States)

2014-08-12

The title of our project is “Amino acid-sensing ion channels in plants”. Its goals are two-fold: to determine the molecular functions of glutamate receptor-like (GLR) proteins, and to elucidate their biological roles (physiological or developmental) in plants. Here is our final technical report. We were highly successful in two of the three aims, modestly successful in the third.

Coordinations between gene modules control the operation of plant amino acid metabolic networks

Directory of Open Access Journals (Sweden)

Galili Gad

2009-01-01

Full Text Available Abstract Background Being sessile organisms, plants should adjust their metabolism to dynamic changes in their environment. Such adjustments need particular coordination in branched metabolic networks in which a given metabolite can be converted into multiple other metabolites via different enzymatic chains. In the present report, we developed a novel "Gene Coordination" bioinformatics approach and use it to elucidate adjustable transcriptional interactions of two branched amino acid metabolic networks in plants in response to environmental stresses, using publicly available microarray results. Results Using our "Gene Coordination" approach, we have identified in Arabidopsis plants two oppositely regulated groups of "highly coordinated" genes within the branched Asp-family network of Arabidopsis plants, which metabolizes the amino acids Lys, Met, Thr, Ile and Gly, as well as a single group of "highly coordinated" genes within the branched aromatic amino acid metabolic network, which metabolizes the amino acids Trp, Phe and Tyr. These genes possess highly coordinated adjustable negative and positive expression responses to various stress cues, which apparently regulate adjustable metabolic shifts between competing branches of these networks. We also provide evidence implying that these highly coordinated genes are central to impose intra- and inter-network interactions between the Asp-family and aromatic amino acid metabolic networks as well as differential system interactions with other growth promoting and stress-associated genome-wide genes. Conclusion Our novel Gene Coordination elucidates that branched amino acid metabolic networks in plants are regulated by specific groups of highly coordinated genes that possess adjustable intra-network, inter-network and genome-wide transcriptional interactions. We also hypothesize that such transcriptional interactions enable regulatory metabolic adjustments needed for adaptation to the stresses.

Thermal treatment and competing technologies for remediation of MGP (manufactured gas plant) sites

International Nuclear Information System (INIS)

McGowan, T.F.; Greer, B.A.; Lawless, M.

1995-01-01

More than 1,500 MGP (manufactured gas plant) sites exist throughout the US. Many are contaminated with coal tar from coal-fueled gas works which produced ''town gas'' from the mid-1800s through the 1950s. Virtually all old US cities have such sites. Most are in downtown areas, as they were installed for central distribution of manufactured gas. While a few sites are CERCLA/Superfund, most are not. However, the contaminants and methods used for remediation are similar to those used for Superfund cleanups of coal tar contamination from wood-treating and coke oven facilities. Clean-up of sites is triggered by property transfers and re-development as well as releases to the environment--in particular, via ground water migration. This paper describes recent experience with high capacity/low cost thermal desorption process for this waste. It also reviews competing non-thermal technology, such as bio-treatment, capping, recycling, and dig and haul. Cost data are provided for all technologies, and a case study for thermal treatment is also presented

Occurrence and fate of perfluorinated acids in two wastewater treatment plants in Shanghai, China.

Science.gov (United States)

Zhang, Chaojie; Yan, Hong; Li, Fei; Zhou, Qi

2015-02-01

Perfluorinated acids (PFAs) have drawn much attention due to their environmental persistence, ubiquitous existence, and bioaccumulation potential. The discharge of wastewater effluent from municipal wastewater treatment plants (WWTPs) is a significant source of PFAs to the environment. In this study, wastewater and sludge samples were collected from two WWTPs in Shanghai, China, to investigate the contamination level and fate of PFAs in different stages of processing. The total concentrations of PFAs (∑PFAs) in influent from plants A and B were 2,452 and 292 ng L(-1), respectively. Perfluoropentanoic acid (1,520 ± 80 ng L(-1) in plant A and 89.2 ± 12.1 ng L(-1) in plant B) was the predominant PFA in influent waters, followed by perfluorooctanoic acid. The concentration of ∑PFAs ranged from 75.0 to 126.0 ng g(-1) dry weight in sludge samples from plant B, with perfluorooctanesulfonic acid as the predominant contaminant. The concentrations and fate of PFAs in different WWTPs vary. The ∑PFAs entering plant A decreased significantly in the final effluent of activated sludge process, while that in plant B increased significantly in the final effluent of sequencing batch reactor system. The concentration changes could be due to the sorption onto sludge, or the degradation of PFAs precursors.

Engineering plastid fatty acid biosynthesis to improve food quality and biofuel production in higher plants.

Science.gov (United States)

Rogalski, Marcelo; Carrer, Helaine

2011-06-01

The ability to manipulate plant fatty acid biosynthesis by using new biotechnological approaches has allowed the production of transgenic plants with unusual fatty acid profile and increased oil content. This review focuses on the production of very long chain polyunsaturated fatty acids (VLCPUFAs) and the increase in oil content in plants using molecular biology tools. Evidences suggest that regular consumption of food rich in VLCPUFAs has multiple positive health benefits. Alternative sources of these nutritional fatty acids are found in cold-water fishes. However, fish stocks are in severe decline because of decades of overfishing, and also fish oils can be contaminated by the accumulation of toxic compounds. Recently, there is also an increase in oilseed use for the production of biofuels. This tendency is partly associated with the rapidly rising costs of petroleum, increased concern about the environmental impact of fossil oil and the attractive need to develop renewable sources of fuel. In contrast to this scenario, oil derived from crop plants is normally contaminant free and less environmentally aggressive. Genetic engineering of the plastid genome (plastome) offers a number of attractive advantages, including high-level foreign protein expression, marker-gene excision and transgene containment because of maternal inheritance of plastid genome in most crops. Here, we describe the possibility to improve fatty acid biosynthesis in plastids, production of new fatty acids and increase their content in plants by genetic engineering of plastid fatty acid biosynthesis via plastid transformation. © 2011 The Authors. Plant Biotechnology Journal © 2011 Society for Experimental Biology, Association of Applied Biologists and Blackwell Publishing Ltd.

Toward Self-Growing Soft Robots Inspired by Plant Roots and Based on Additive Manufacturing Technologies.

Science.gov (United States)

Sadeghi, Ali; Mondini, Alessio; Mazzolai, Barbara

2017-09-01

In this article, we present a novel class of robots that are able to move by growing and building their own structure. In particular, taking inspiration by the growing abilities of plant roots, we designed and developed a plant root-like robot that creates its body through an additive manufacturing process. Each robotic root includes a tubular body, a growing head, and a sensorized tip that commands the robot behaviors. The growing head is a customized three-dimensional (3D) printer-like system that builds the tubular body of the root in the format of circular layers by fusing and depositing a thermoplastic material (i.e., polylactic acid [PLA] filament) at the tip level, thus obtaining movement by growing. A differential deposition of the material can create an asymmetry that results in curvature of the built structure, providing the possibility of root bending to follow or escape from a stimulus or to reach a desired point in space. Taking advantage of these characteristics, the robotic roots are able to move inside a medium by growing their body. In this article, we describe the design of the growing robot together with the modeling of the deposition process and the description of the implemented growing movement strategy. Experiments were performed in air and in an artificial medium to verify the functionalities and to evaluate the robot performance. The results showed that the robotic root, with a diameter of 50 mm, grows with a speed of up to 4 mm/min, overcoming medium pressure of up to 37 kPa (i.e., it is able to lift up to 6 kg) and bending with a minimum radius of 100 mm.

Enhanced biodegradation of polyaromatic hydrocarbons in manufactured gas plant wastes

International Nuclear Information System (INIS)

Gauger, W.K.; Srivastava, V.J.; Hayes, T.D.; Linz, D.G.

1990-01-01

Scientists at the Institute of Gas Technology (IGT) have focused on enhancing destruction of polyaromatic hydrocarbons (PAHs) present as pollutants in manufactured gas plant (MGP) soils. The factor that bears the most restrictive influence on successful biological PAH degradation is low pollutant transfer from soil into an aqueous environment where biotreatment processes can take place. Physical and chemical enhancements were used in conjunction with biological processes. Physical enhancements overcame the mass transfer problem and made possible the biological destruction of aromatic hydrocarbons. One- to three-ring aromatic hydrocarbons were readily biodegraded in liquid, soil slurry, and -- to a lesser degree -- composted soil systems. Four- to six-ring PAHs remained persistent but were effectively destroyed when chemical co-treatments were used. Combined biological/chemical/physical processes are currently being tested to achieve the most extensive PAH degradation possible for MGP soils. 8 refs., 9 figs., 2 tabs

Mycobiota and toxigenic Penicillium species on two Spanish dry-cured ham manufacturing plants.

Science.gov (United States)

Alapont, C; López-Mendoza, M C; Gil, J V; Martínez-Culebras, P V

2014-01-01

The present study reports the natural mycobiota occurring in dry-cured hams, and in particular on the incidence of mycotoxin-producing fungi. A total of 338 fungal colonies were isolated from three stages of production, these being the post-salting, ripening and aging stages in two manufacturing plants. The results show that fungi were more frequently isolated from the aging stage and that the predominant filamentous fungal genus isolated was Penicillium. Seventy-four of the 338 fungal strains were selected for identification at the species level by using morphological criteria and internal transcribed spacers sequencing. Of the 74 fungal strains, 59 were Penicillium strains. Sixteen Penicillium species were identified, with P. commune (24 strains) and P. chrysogenum (13 strains) being the most abundant. The potential ability to produce cyclopiazonic acid (CPA) and ochratoxin A (OTA) was studied by isolating the culture followed by HPLC analysis of these mycotoxins in the culture extracts. The results indicated that 25 (33.7%) of the 74 fungal strains produced CPA. Worth noting is the high percentage of CPA-producing strains of P. commune (66.6%) of which some strains were highly toxigenic. P. polonicum strains were also highly toxigenic. With respect to OTA-producing fungi, a low percentage of fungal strains (9.5%) were able to produce OTA at moderate levels. OTA-producing fungi belonged to different Penicillium species including P. chrysogenum, P. commune, P. polonicum and P. verrucosum. These results indicate that there is a possible risk factor posed by CPA and OTA contamination of dry-cured hams.

Alleviating soil acidity through plant organic compounds

Directory of Open Access Journals (Sweden)

Anderson R. Meda

2001-06-01

Full Text Available A laboratory experiment was conducted to evaluate the effects of water soluble plant extracts on soil acidity. The plant materials were: black oat, oil seed radish, white and blue lupin, gray and dwarf mucuna, Crotalaria spectabilis and C. breviflora, millet, pigeon pea, star grass, mato grosso grass, coffee leaves, sugar cane leaves, rice straw, and wheat straw. Plant extracts were added on soil surface in a PVC soil column at a rate of 1.0 ml min-1. Both soil and drainage water were analyzed for pH, Ca, Al, and K. Plant extracts applied on the soil surface increased soil pH, exchangeable Ca ex and Kex and decreased Al ex. Oil seed radish, black oat, and blue lupin were the best and millet the worst materials to alleviate soil acidity. Oil seed radish markedly increased Al in the drainage water. Chemical changes were associated with the concentrations of basic cations in the plant extract: the higher the concentration the greater the effects in alleviating soil acidity.Foram conduzidos experimentos de laboratórios para avaliar os efeitos de extratos de plantas solúveis em água na acidez do solo. Os materiais de plantas foram: aveia preta, nabo, tremoço branco e azul, mucuna cinza e anã, Crotalaria spectabilis e C. breviflora, milheto, guandu, grama estrela, grama mato grosso, folhas de café, folhas de cana-de-açúcar, palhada de arroz e palhada de trigo. Foi utilizado o seguinte procedimento para o extrato da planta solúvel em água: pesar 3g de material de planta, adicionar 150 ml de água, agitar por 8h e filtrar. Os extratos de plantas foram adicionados na superfície do solo em uma coluna de PVC (1 ml min-1. Após, adicionou-se água deionizada em quantidade equivalente a três volumes de poros. Os extratos de plantas aumentaram o pH, Ca e K trocável e diminuíram Al. Nabo, aveia preta e tremoço azul foram os melhores e milheto o pior material para amenizar a acidez do solo. Nabo aumentou Al na água de drenagem. As altera

Optimized Jasmonic Acid Production by Lasiodiplodia theobromae Reveals Formation of Valuable Plant Secondary Metabolites.

Directory of Open Access Journals (Sweden)

Felipe Eng

Full Text Available Jasmonic acid is a plant hormone that can be produced by the fungus Lasiodiplodia theobromae via submerged fermentation. From a biotechnological perspective jasmonic acid is a valuable feedstock as its derivatives serve as important ingredients in different cosmetic products and in the future it may be used for pharmaceutical applications. The objective of this work was to improve the production of jasmonic acid by L. theobromae strain 2334. We observed that jasmonic acid formation is dependent on the culture volume. Moreover, cultures grown in medium containing potassium nitrate as nitrogen source produced higher amounts of jasmonic acid than analogous cultures supplemented with ammonium nitrate. When cultivated under optimal conditions for jasmonic acid production, L. theobromae secreted several secondary metabolites known from plants into the medium. Among those we found 3-oxo-2-(pent-2-enyl-cyclopentane-1-butanoic acid (OPC-4 and hydroxy-jasmonic acid derivatives, respectively, suggesting that fungal jasmonate metabolism may involve similar reaction steps as that of plants. To characterize fungal growth and jasmonic acid-formation, we established a mathematical model describing both processes. This model may form the basis of industrial upscaling attempts. Importantly, it showed that jasmonic acid-formation is not associated to fungal growth. Therefore, this finding suggests that jasmonic acid, despite its enormous amount being produced upon fungal development, serves merely as secondary metabolite.

Characterization and remediation of a former manufactured gas plant (MGP) disposal site

International Nuclear Information System (INIS)

Murarka, I.P.; Neuhauser, E.F.; Sherman, M.W.; Taylor, B.B.; Mauro, D.M.; Ripp, J.A.; Taylor, T.D.

1993-01-01

From the early 1800s through the late 1940s, the production of gas using coal, coke or oil resulted in generation of large volumes of residues including coal tar, lamp black and wood chips containing cyanides at manufactured gas plant (MGP) sites. Often, these tarry residues were disposed of by burial at or near these plants. In recent years, old MGP sites have come under increased scrutiny from environmental regulators. To address the issues of groundwater contamination and need for clean-up, it is necessary to accurately determine where the tarry materials are now located and how different chemicals released from tars have migrated away from their sources. EPRI research at a coal-tar disposal site in New York has focused on examining and evaluating conventional and innovative methods for sampling and analysis to delineate the nature and extent of subsurface contamination, and to assess the efficacy of remedial actions. This paper presents some of the results of this research and offers recommendations on conducting size investigations as well as selecting appropriate remediation measures

On the role of salicylic acid in plant responses to environmental stresses

DEFF Research Database (Denmark)

Hernández, José A.; Diaz-Vivancos, Pedro; Barba Espin, Gregorio

2017-01-01

(NPR1), which is one of the few known redox-regulated proteins in plants. Different synthetic chemicals are able to mimic the ability of SA to activate resistance to various stresses, both biotic and abiotic, in plants with agronomic interest. Among these chemicals, 2,6-dichloroisonicotinic acid (INA......Salicylic acid (SA) is a plant hormone more commonly known by its role in human medicine than in the field of plant physiology. However, in the last two decades, SA has been described as an important signalling molecule in plants regulating growth, development and response to a wide number...... of biotic and abiotic stresses. Indeed, actually, it is well known that SA is a key signalling molecule involved in systemic acquired resistance (SAR), and recent works reported a role for SA in the response to salt or drought stresses. The precise mode of the stress hormone SA action is unclear, although...

Bioengineered Plants Can Be a Useful Source of Omega-3 Fatty Acids

Directory of Open Access Journals (Sweden)

Waleed Amjad Khan

2017-01-01

Full Text Available Omega-3 fatty acids have proven to be very essential for human health due to their multiple health benefits. These essential fatty acids (EFAs need to be uptaken through diet because they are unable to be produced by the human body. These are important for skin and hair growth as well as for proper visual, neural, and reproductive functions of the body. These fatty acids are proven to be extremely vital for normal tissue development during pregnancy and infancy. Omega-3 fatty acids can be obtained mainly from two dietary sources: marine and plant oils. Eicosapentaenoic acid (EPA; C20:5 n-3 and docosahexaenoic acid (DHA; C22:6 n-3 are the primary marine-derived omega-3 fatty acids. Marine fishes are high in omega-3 fatty acids, yet high consumption of those fishes will cause a shortage of fish stocks existing naturally in the oceans. An alternative source to achieve the recommended daily intake of EFAs is the demand of today. In this review article, an attempt has, therefore, been made to discuss the importance of omega-3 fatty acids and the recent developments in order to produce these fatty acids by the genetic modifications of the plants.

Integrating nitric oxide into salicylic acid and jasmonic acid/ethylene plant defense pathways

DEFF Research Database (Denmark)

Mur, Luis A J; Prats, Elena; Pierre, Sandra

2013-01-01

to be tailored to particular biotic stresses. Nitric oxide (NO) has emerged as a major signal influencing resistance mediated by both signalling pathways but no attempt has been made to integrate NO into established SA/JA/ET interactions. NO has been shown to act as an inducer or suppressor of signalling along......Plant defence against pests and pathogens is known to be conferred by either salicylic acid (SA) or jasmonic acid (JA)/ethylene (ET) pathways, depending on infection or herbivore-grazing strategy. It is well attested that SA and JA/ET pathways are mutually antagonistic allowing defence responses...

Managing Your Energy: An ENERGY STAR(R) Guide for Identifying Energy Savings in Manufacturing Plants

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Angelini, Tana; Masanet, Eric

2010-07-27

In the United States, industry spends over $100 billion annually to power its manufacturing plants. Companies also spend on maintenance, capital outlay, and energy services. Improving energy efficiency is vital to reduce these costs and increase earnings. Many cost-effective opportunities to reduce energy consumption are available, and this Energy Guide discusses energy-efficiency practices and energy-efficient technologies that can be applied over a broad spectrum of companies. Strategies in the guide address hot water and steam, compressed air, pumps, motors, fans, lighting, refrigeration, and heating, ventilation, and air conditioning. This guide includes descriptions of expected energy and cost savings, based on real-world applications, typical payback periods, and references to more detailed information. The information in this Energy Guide is intended to help energy and plant managers achieve cost-effective energy reductions while maintaining product quality. Further research on the economics of all measures--as well as on their applicability to different production practices?is needed to assess their cost effectiveness at individual plants.

Silicon in vascular plants: uptake, transport and its influence on mineral stress under acidic conditions.

Science.gov (United States)

Pontigo, Sofía; Ribera, Alejandra; Gianfreda, Liliana; de la Luz Mora, María; Nikolic, Miroslav; Cartes, Paula

2015-07-01

So far, considerable advances have been achieved in understanding the mechanisms of Si uptake and transport in vascular plants. This review presents a comprehensive update about this issue, but also provides the new insights into the role of Si against mineral stresses that occur in acid soils. Such information could be helpful to understand both the differential Si uptake ability as well as the benefits of this mineral element on plants grown under acidic conditions. Silicon (Si) has been widely recognized as a beneficial element for many plant species, especially under stress conditions. In the last few years, great efforts have been made to elucidate the mechanisms involved in uptake and transport of Si by vascular plants and recently, different Si transporters have been identified. Several researches indicate that Si can alleviate various mineral stresses in plants growing under acidic conditions, including aluminium (Al) and manganese (Mn) toxicities as well as phosphorus (P) deficiency all of which are highly detrimental to crop production. This review presents recent findings concerning the influence of uptake and transport of Si on mineral stress under acidic conditions because a knowledge of this interaction provides the basis for understanding the role of Si in mitigating mineral stress in acid soils. Currently, only four Si transporters have been identified and there is little information concerning the response of Si transporters under stress conditions. More investigations are therefore needed to establish whether there is a relationship between Si transporters and the benefits of Si to plants subjected to mineral stress. Evidence presented suggests that Si supply and its subsequent accumulation in plant tissues could be exploited as a strategy to improve crop productivity on acid soils.

Why plants grow poorly on very acid soils: are ecologists missing the obvious?

Science.gov (United States)

Kidd, P S; Proctor, J

2001-04-01

Factors associated with soil acidity are considered to be limiting for plants in many parts of the world. This work was undertaken to investigate the role of the toxicity of hydrogen (H(+)) which seems to have been underconsidered by ecologists as an explanation of the reduced plant growth observed in very acid soils. Racial differences are reported in plant growth response to increasing acidity in the grass Holcus lanatus L. (Yorkshire-fog) and the tree Betula pendula Roth (Silver Birch). Soils and seeds were collected from four Scottish sites which covered a range of soils from acid (organic and mineral) to more base-rich. The sites and their pH (1:2.5 fresh soil:0.01 M CaCl(2)) were: Flanders Moss (FM), pH 3.2+/-0.03; Kippenrait Glen (KP), pH 4.8+/- 0.05; Kinloch Rannoch (KR), pH 6.1+/-0.16; and Sheriffmuir (SMM), pH 4.3+/-0.11. The growth rates of two races of H. lanatus, FM and KP, and three races of B. pendula (SMM, KP and KR) were measured in nutrient solution cultures at pH 2.0 (H. lanatus only), 3.0, 4.0, 5.0, and 5.6. Results showed races from acid organic soils (FM) were H(+)-tolerant while those from acid mineral soils (SMM) were Al(3+)-tolerant but not necessarily H(+)-tolerant. These results confirmed that populations were separately adapted to H(+) or Al(3+) toxicity and this was dependent upon the soil characteristics at their site of collection. The fact of plant adaptation to H(+) toxicity supports the view that this is an important factor in very acid soils.

Assessing dust exposure in an integrated iron and steel manufacturing plant in South India.

Science.gov (United States)

Ravichandran, B; Krishnamurthy, V; Ravibabu, K; Raghavan, S; Rajan, B K; Rajmohan, H R

2008-01-01

A study to monitor and estimate respirable particulate matter (RPM), toxic trace metal concentrations in the work environment was carried out in different sections of an integrated steel manufacturing industry. The average RPM concentration observed varied according to the section blast furnace was 2.41 mg/m;{3}; energy optimization furnace, 1.87 mg/m;{3}; sintering plant, 0.98 mg/m;{3}; continuous casting machine, 1.93 mg/m;{3}. The average trace metal concentration estimated from the RPM samples like iron, manganese, lead and chromium did not exceed ACGIH prescribed levels.

Manufacturing plant location selection in logistics network using Analytic Hierarchy Process

Directory of Open Access Journals (Sweden)

Ping-Yu Chang

2015-11-01

Full Text Available Purpose: In recent years, numerous companies have moved their manufacturing plants to China to capitalize on lower cost and tax. Plant location has such an impact on cost, stocks, and logistics network but location selection in the company is usually based on subjective preference of high ranking managers. Such a decision-making process might result in selecting a location with a lower fixed cost but a higher operational cost. Therefore, this research adapts real data from an electronics company to develop a framework that incorporates both quantitative and qualitative factors for selecting new plant locations. Design/methodology/approach: In-depth interviews were conducted with 12 high rank managers (7 of them are department manager, 2 of them are vice-president, 1 of them is senior engineer, and 2 of them are plant manager in the departments of construction, finance, planning, production, and warehouse to determine the important factors. A questionnaire survey is then conducted for comparing factors which are analyzed using the Analytic Hierarchy Process (AHP. Findings: Results show that the best location chosen by the developed framework coincides well with the company’s primal production base. The results have been presented to the company’s high ranking managers for realizing the accuracy of the framework. Positive responses of the managers indicate usefulness of implementing the proposed model into reality, which adds to the value of this research. Practical implications: The proposed framework can save numerous time-consuming meetings called to compromise opinions and conflictions from different departments in location selection. Originality/value: This paper adapts the Analytic Hierarchy Process (AHP to incorporate quantitative and qualitative factors which are obtained through in-depth interviews with high rank managers in a company into the location decision.

Analysis and evaluation of the possibility of introducing phosphoric acid fuel cells

Science.gov (United States)

1991-03-01

Each step in the manufacture of fuel cells is reviewed. The possibility of cost reduction in the process is investigated. Additionally, the feasibility of providing financial assistance for fuel cell buyers is investigated. Also, the present status and the future outlook of fuel cell development are discussed. In Japan, phosphoric acid fuel cells are beginning demonstration testing. A 200 kW test plant, for commercial and remote island use, has finished its demonstration test favorably. The test run of an 11 mW plant, for the production of electric power, is being conducted by a private company. The manufacture of each of the fuel cell's subsystems is semi-automated at this time. The costs are estimated to be reduced to 60 - 80 percent of the present costs in a 10 mW/year plant and TO 50 - 60 percent of the present costs in a 100 mW/year plant.

Salicylic acid, a plant defense hormone, is specifically secreted by a molluscan herbivore.

Science.gov (United States)

Kästner, Julia; von Knorre, Dietrich; Himanshu, Himanshu; Erb, Matthias; Baldwin, Ian T; Meldau, Stefan

2014-01-01

Slugs and snails are important herbivores in many ecosystems. They differ from other herbivores by their characteristic mucus trail. As the mucus is secreted at the interface between the plants and the herbivores, its chemical composition may play an essential role in plant responses to slug and snail attack. Based on our current knowledge about host-manipulation strategies employed by pathogens and insects, we hypothesized that mollusks may excrete phytohormone-like substances into their mucus. We therefore screened locomotion mucus from thirteen molluscan herbivores for the presence of the plant defense hormones jasmonic acid (JA), salicylic acid (SA) and abscisic acid (ABA). We found that the locomotion mucus of one slug, Deroceras reticulatum, contained significant amounts of SA, a plant hormone that is known to induce resistance to pathogens and to suppress plant immunity against herbivores. None of the other slugs and snails contained SA or any other hormone in their locomotion mucus. When the mucus of D. reticulatum was applied to wounded leaves of A. thaliana, the promotor of the SA-responsive gene pathogenesis related 1 (PR1) was activated, demonstrating the potential of the mucus to regulate plant defenses. We discuss the potential ecological, agricultural and medical implications of this finding.

Salicylic acid, a plant defense hormone, is specifically secreted by a molluscan herbivore.

Directory of Open Access Journals (Sweden)

Julia Kästner

Full Text Available Slugs and snails are important herbivores in many ecosystems. They differ from other herbivores by their characteristic mucus trail. As the mucus is secreted at the interface between the plants and the herbivores, its chemical composition may play an essential role in plant responses to slug and snail attack. Based on our current knowledge about host-manipulation strategies employed by pathogens and insects, we hypothesized that mollusks may excrete phytohormone-like substances into their mucus. We therefore screened locomotion mucus from thirteen molluscan herbivores for the presence of the plant defense hormones jasmonic acid (JA, salicylic acid (SA and abscisic acid (ABA. We found that the locomotion mucus of one slug, Deroceras reticulatum, contained significant amounts of SA, a plant hormone that is known to induce resistance to pathogens and to suppress plant immunity against herbivores. None of the other slugs and snails contained SA or any other hormone in their locomotion mucus. When the mucus of D. reticulatum was applied to wounded leaves of A. thaliana, the promotor of the SA-responsive gene pathogenesis related 1 (PR1 was activated, demonstrating the potential of the mucus to regulate plant defenses. We discuss the potential ecological, agricultural and medical implications of this finding.

Response of citrus and other selected plant species to simulated HCL - acid rain

Science.gov (United States)

Knott, W. M.; Heagle, A. S.

1980-01-01

Mature valencia orange trees were sprayed with hydrochloric acid solutions (pH 7.8, 2.0, 1.0, and 0.5) in the field at the full bloom stage and at one month after fruit set. Potted valencia orange and dwarf citrus trees, four species of plants native to Merritt Island, and four agronomic species were exposed to various pH levels of simulated acid rain under controlled conditions. The acid rain was generated from dilutions of hydrochloric acid solutions or by passing water through an exhaust generated by burning solid rocket fuel. The plants were injured severely at pH levels below 1.0, but showed only slight injury at pH levels of 2.0 and above. Threshold injury levels were between 2.0 and 3.0 pH. The sensitivity of the different plant species to acid solutions was similar. Foliar injury symptoms were representative of acid rain including necrosis of young tissue, isolated necrotic spots or patches, and leaf abscission. Mature valencia orange trees sprayed with concentrations of 1.0 pH and 0.5 pH in the field had reduced fruit yields for two harvests after the treatment. All experimental trees were back to full productivity by the third harvest after treatment.

[Modeling of lactic acid fermentation of leguminous plant juices].

Science.gov (United States)

Shurkhno, R A; Validov, Sh Z; Boronin, A M; Naumova, R P

2006-01-01

Lactic acid fermentation of leguminous plant juices was modeled to provide a comparative efficiency assessment of the previously selected strains of lactic acid bacteria as potential components of starter cultures. Juices of the legumes fodder galega, red clover, and alfalfa were subjected to lactic acid fermentation in 27 variants of experiment. Local strains (Lactobacillus sp. RS 2, Lactobacillus sp. RS 3, and Lactobacillus sp. RS 4) and the collection strain Lactobacillus plantarum BS 933 appeared the most efficient (with reference to the rate and degree of acidogenesis, ratio of lactic and acetic acids, and dynamics of microflora) in fermenting fodder galega juice; Lactobacillus sp. RS 1, Lactobacillus sp. RS 2, Lactobacillus sp. RS 3, Lactobacillus sp. RS 4, and L. plantarum BS 933 were the most efficient for red clover juice. Correction of alfalfa juice fermentation using the tested lactic acid bacterial strains appeared inefficient, which is explainable by its increased protein content and a low level of the acids produced during fermentation.

EFFECT OF SOME PLANT OILS ON THE FATTY ACIDS OF HUMP BEETLE GIBBIUM PSYLLOIDES

International Nuclear Information System (INIS)

ABBASY, S.A.; ALY, W.M.; REZK, S.A.

2008-01-01

The efficiency of some plant oils (sesame oil, camphor oil, castor oil and camomile oil) as insecticides were studied on newly emerged males and females Gibbium psylloids and also the effect of LC50 of each plant oils on fatty acids composition and relative concentration were determined. The obtained results showed that sesame oil had proved to be more effective with it's advantage over other tested oils of being used at lower concentration and it followed by chamomile oil then camphor oil and finally castor oil. The susceptibility of the males and females to plant oils was the same. There were differences in the number and relative concentration of fatty acids between males and females. Nine fatty acids were detected by the analysis of the whole body of untreated males , these fatty acids are capric (C10) , lauric (C12) , myristic (C14), palmiloleic (C16), margic (C17), stearic (C18) , oleic (C18:1) , linoleic (C18:2) and linolenic (C18:3) . Treatments of males with LC50 sesame oil lead to the appearance of ten fatty acids with increase of caprylic acid (C8) while LC50 chamomile oil lead to the appearance of six fatty acids and fatty acid with C10 , C18:1 and C18:2 were disappeared as compared to control. LC50 of camphor oil lead to the appearance of ten fatty acids and castor oil lead to the appearance of six fatty acids. In untreated females, five fatty acids with C12 , C16 , C17 , C18 and C18:1 were detected. Treatments with sesame oil lead to the appearance of new fatty acid with C18:2 and chamomile oil lead to the appearance of nine fatty acids with increase of C8 , C10 , C14 and C18:2 as compared with untreated females. Camphor oil treatment lead to the appearance of nine fatty acids with increase of four fatty acids with C6 , C8 , C10 and C18:2 as compared to untreated females and fatty acid with C18:1 was disappeared in the treatments. Castor oil leads to the appearance of seven fatty acids. The relative concentration of C12 was the highest fatty acid in

Case study: centralized wastewater treatment plant at Rawang Integrated Industrial Park

International Nuclear Information System (INIS)

Ting Teo Ming; Khomsaton Abu Bakar; Zulkafli Ghazali; Khairul Zaman Mohd Dahlan

2006-01-01

Survey has been conducted at Rawang Integrated Industrial Park (RIIP) to investigate the possibility of setting up centralized industrial wastewater treatment plant. Rawang integrated industrial park is selected based on suggestion from department of environment. RIIP consists of about 150 industries with various type of activities operated in the area. Only 9 out of estimated 150 industries have individual wastewater treatment plant. The business activities of the 9 industries include food processing, textile, welding rods manufacturing, steel galvanizing and battery manufacturing. Wastewater generated by the industries are characterized by high oil and grease, cod, bod, organic matter, metal hydroxide and acidic. Besides that most of industries do the monitoring only once a month. This paper will also discuss the advantages of setting up of centralized industrial wastewater treatment plant to the government authorities, industries, people and environment. (Author)

Actual state of plant decline phenomena due to acid rain and others

International Nuclear Information System (INIS)

Yokobori, Makoto

1992-01-01

Recently, Japanese mass communication earnestly reports on the effect that acid rain exerts to natural environment. Also the researches have been carried out on the present state of rainwater acidification, the mechanism of the effect of acid rain to plants, the experiment using artificial acid rain, and the foreign theories on the cause of the decline of forests. But the example of the damage of trees and plants in fields, of which the true cause is understood to be acid rain, is not found. The author has engaged in the research on forest protection for long years, and according to his experience, in the present Japanese research on acid rain, there are a number of important pitfalls. Acid rain theory is only one of many hypotheses. It must be verified by the proper research, and this point is important. Ibaraki Prefectural Forest Experiment station has carried out the consultation on the diagnosis and restoration of tree conditions, and the decline of trees and its cause are reported according to the examples of investigation. In the consultation in the last nine years, the decline of trees caused by acid rain was not confirmed. (K.I.)

Induction of gentisic acid 5-O-beta-D-xylopyranoside in tomato and cucumber plants infected by different pathogens.

Science.gov (United States)

Fayos, Joaquín; Bellés, José María; López-Gresa, M Pilar; Primo, Jaime; Conejero, Vicente

2006-01-01

Tomato plants infected with the citrus exocortis viroid exhibited strongly elevated levels of a compound identified as 2,5-dihydroxybenzoic acid (gentisic acid, GA) 5-O-beta-D-xylopyranoside. The compound accumulated early in leaves expressing mild symptoms from both citrus exocortis viroid-infected tomato, and prunus necrotic ringspot virus-infected cucumber plants, and progressively accumulated concomitant with symptom development. The work presented here demonstrates that GA, mainly associated with systemic infections in compatible plant-pathogen interactions [Bellés, J.M., Garro, R., Fayos, J., Navarro, P., Primo, J., Conejero, V., 1999. Gentisic acid as a pathogen-inducible signal, additional to salicylic acid for activation of plant defenses in tomato. Mol. Plant-Microbe Interact. 12, 227-235], is conjugated to xylose. Notably, this result contrasts with those previously found in other plant-pathogen interactions in which phenolics analogues of GA as benzoic or salicylic acids, are conjugated to glucose.

78 FR 58574 - Maintenance, Testing, and Replacement of Vented Lead-Acid Storage Batteries for Nuclear Power Plants

Science.gov (United States)

2013-09-24

...-Acid Storage Batteries for Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION... for Nuclear Power Plants.'' The guide describes methods that the NRC staff considers acceptable for... replacement of vented lead-acid storage batteries in nuclear power plants. ADDRESSES: Please refer to Docket...

Further Studies on Oxalic Acid Biosynthesis in Oxalate-accumulating Plants 1

Science.gov (United States)

Nuss, Richard F.; Loewus, Frank A.

1978-01-01

l-Ascorbic acid functions as a precursor of oxalic acid in several oxalate-accumulating plants. The present study extends this observation to include Rumex crispus L. (curly dock), Amaranthus retroflexus L. (red root pigweed), Chenopodium album L. (lamb's-quarters), Beta vulgaris L. (sugar beet), Halogeton glomeratus M. Bieb. (halogeton), and Rheum rhabarbarum L. (rhubarb). Several species with low oxalate content are also examined. When l-[1-14C]ascorbic acid is supplied to young seedlings of R. crispus or H. glomeratus, a major portion of the 14C is released over a 24-hour period as 14CO2 and only a small portion is recovered as [14C]oxalate, unlike cuttings from 2- or 4-month-old plants which retain a large part of the 14C as [14C]oxalic acid and release very little 14CO2. Support for an intermediate role of oxalate in the release of 14CO2 from l-[1-14C]ascorbic acid is seen in the rapid release of 14CO2 by R. crispus and H. glomeratus seedlings labeled with [14C]oxalic acid. The common origin of oxalic acid carbon in the C1 and C2 fragment from l-ascorbic acid is demonstrated by comparison of 14C content of oxalic acid in several oxalate-accumulators after cuttings or seedlings are supplied equal amounts of l-[1-14C]- or l-[UL-14C]ascorbic acid. Theoretically, l-[1-14C]ascorbic acid will produce labeled oxalic acid containing three times as much 14C as l-[UL-14C]ascorbic acid when equal amounts of label are provided. Experimentally, a ratio of 2.7 ± 0.5 is obtained in duplicate experiments with six different species. PMID:16660342

Effects of cadmium stress on growth and amino acid metabolism in two Compositae plants.

Science.gov (United States)

Zhu, Guangxu; Xiao, Huayun; Guo, Qingjun; Zhang, Zhongyi; Zhao, Jingjing; Yang, Dan

2018-08-30

Cadmium, a high toxic heavy metal, is one of the most serious contaminants in soil and a potential threat to plant growth and human health. Amino acid metabolism has the central role in heavy metal stress resistance of plants. In this paper, a pot experiment was carried out to study the effects of different concentrations of cadmium (0, 3, 6, 12, 30 mg kg -1 ) on the growth, Cd accumulation and amino acid metabolism in two Compositae plants (Ageratum conyzoides L. and Crassocephalum crepidioides). The results showed that under cadmium stress, C. crepidioides accumulated more Cd in its shoot and was tolerant to Cd, whereas its low Cd-accumulating relative, A. conyzoides, suffered reduced growth. The Cd content in the aerial part of C. crepidioides exceeded the threshold of Cd-hyperaccumulator. Furthermore, the bioaccumulation factor (BCF) and biological transfer factor (BTF) values for Cd in C. crepidioides were > 1. Thus, C. crepidioides can be regarded as Cd-hyperaccumulator. The comparison between both studied plants indicated that Cd stress resulted in a differential but coordinated response of amino acid levels, which are playing a significant role in plant adaptation to Cd stress. Glu, Gln, Asp, Asn, Gaba, Val and Ala dominated the major amino acids. Higher Cd tolerance and Cd accumulation in C. crepidioides was associated with greater accumulation of free amino acids, especially for Gln and Asn, in C. crepidioides than in A. conyzoides. Copyright © 2018 Elsevier Inc. All rights reserved.

Application of carbon and hydrogen stable isotope analyses to detect exogenous citric acid in Japanese apricot liqueur.

Science.gov (United States)

Akamatsu, Fumikazu; Oe, Takaaki; Hashiguchi, Tomokazu; Hisatsune, Yuri; Kawao, Takafumi; Fujii, Tsutomu

2017-08-01

Japanese apricot liqueur manufacturers are required to control the quality and authenticity of their liqueur products. Citric acid made from corn is the main acidulant used in commercial liqueurs. In this study, we conducted spiking experiments and carbon and hydrogen stable isotope analyses to detect exogenous citric acid used as an acidulant in Japanese apricot liqueurs. Our results showed that the δ 13 C values detected exogenous citric acid originating from C 4 plants but not from C 3 plants. The δ 2 H values of citric acid decreased as the amount of citric acid added increased, whether the citric acid originated from C 3 or C 4 plants. Commercial liqueurs with declared added acidulant provided higher δ 13 C values and lower δ 2 H values than did authentic liqueurs and commercial liqueurs with no declared added acidulant. Carbon and hydrogen stable isotope analyses are suitable as routine methods for detecting exogenous citric acid in Japanese apricot liqueur. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pipecolic Acid Orchestrates Plant Systemic Acquired Resistance and Defense Priming via Salicylic Acid-Dependent and -Independent Pathways.

Science.gov (United States)

Bernsdorff, Friederike; Döring, Anne-Christin; Gruner, Katrin; Schuck, Stefan; Bräutigam, Andrea; Zeier, Jürgen

2016-01-01

We investigated the relationships of the two immune-regulatory plant metabolites, salicylic acid (SA) and pipecolic acid (Pip), in the establishment of plant systemic acquired resistance (SAR), SAR-associated defense priming, and basal immunity. Using SA-deficient sid2, Pip-deficient ald1, and sid2 ald1 plants deficient in both SA and Pip, we show that SA and Pip act both independently from each other and synergistically in Arabidopsis thaliana basal immunity to Pseudomonas syringae. Transcriptome analyses reveal that SAR establishment in Arabidopsis is characterized by a strong transcriptional response systemically induced in the foliage that prepares plants for future pathogen attack by preactivating multiple stages of defense signaling and that SA accumulation upon SAR activation leads to the downregulation of photosynthesis and attenuated jasmonate responses systemically within the plant. Whereas systemic Pip elevations are indispensable for SAR and necessary for virtually the whole transcriptional SAR response, a moderate but significant SA-independent component of SAR activation and SAR gene expression is revealed. During SAR, Pip orchestrates SA-dependent and SA-independent priming of pathogen responses in a FLAVIN-DEPENDENT-MONOOXYGENASE1 (FMO1)-dependent manner. We conclude that a Pip/FMO1 signaling module acts as an indispensable switch for the activation of SAR and associated defense priming events and that SA amplifies Pip-triggered responses to different degrees in the distal tissue of SAR-activated plants. © 2016 American Society of Plant Biologists. All rights reserved.

Abscisic Acid Regulation of Root Hydraulic Conductivity and Aquaporin Gene Expression Is Crucial to the Plant Shoot Growth Enhancement Caused by Rhizosphere Humic Acids.

Science.gov (United States)

Olaetxea, Maite; Mora, Verónica; Bacaicoa, Eva; Garnica, María; Fuentes, Marta; Casanova, Esther; Zamarreño, Angel M; Iriarte, Juan C; Etayo, David; Ederra, Iñigo; Gonzalo, Ramón; Baigorri, Roberto; García-Mina, Jose M

2015-12-01

The physiological and metabolic mechanisms behind the humic acid-mediated plant growth enhancement are discussed in detail. Experiments using cucumber (Cucumis sativus) plants show that the shoot growth enhancement caused by a structurally well-characterized humic acid with sedimentary origin is functionally associated with significant increases in abscisic acid (ABA) root concentration and root hydraulic conductivity. Complementary experiments involving a blocking agent of cell wall pores and water root transport (polyethylenglycol) show that increases in root hydraulic conductivity are essential in the shoot growth-promoting action of the model humic acid. Further experiments involving an inhibitor of ABA biosynthesis in root and shoot (fluridone) show that the humic acid-mediated enhancement of both root hydraulic conductivity and shoot growth depended on ABA signaling pathways. These experiments also show that a significant increase in the gene expression of the main root plasma membrane aquaporins is associated with the increase of root hydraulic conductivity caused by the model humic acid. Finally, experimental data suggest that all of these actions of model humic acid on root functionality, which are linked to its beneficial action on plant shoot growth, are likely related to the conformational structure of humic acid in solution and its interaction with the cell wall at the root surface. © 2015 American Society of Plant Biologists. All Rights Reserved.

Chemical and biological relationships relevant to the effect of acid rainfall on the soil-plant system

Science.gov (United States)

Marvin Nyborg

1976-01-01

This paper deals with problems of measuring acidity in rainfall and the interpretation of these measurements in terms of effects on the soil-plant system. Theoretical relationships of the carbon-dioxide-bicarbonate equalibria and its effect on rainfall acidity measurements are given. The relationship of a cation-anion balance model of acidity in rainfall to plant...

Final environmental statement related to the proposed manufacture of floating nuclear power plants: (Docket No. STN 50-437): Part 2, A generic environmental statement considering the siting and operation of floating nuclear power plants

International Nuclear Information System (INIS)

1976-09-01

The proposed action is the issuance of a manufacturing license to Offshore Power Systems for the startup and operation of a proposed manufacturing facility located at Blount Island, Jacksonville, Florida (Docket No. STN 50-437). No nuclear fuel will be handled or stored at the manufacturing site. The plants will be fueled after they have been towed to and moored within protected basins at specific locations designated by the purchaser and after an operating license has been issued by the Nuclear Regulatory Commission. Each nuclear generating plant, mounted on a floating platform, has a net capacity of 1150 MWe. This energy is provided by a pressurized water reactor steam supply system consisting of a Westinghouse four-loop 3425-MWt unit with an ice-condenser containment system. When one or more of these units is located within a single breakwater, the installation is designated an offshore power station. 226 figs., 95 tabs

Foreign Workers, Foreign Multinationals, and Wages after Controlling for Occupation and Sex in Malaysia’s Manufacturing Plants during the mid-1990s

OpenAIRE

Eric D., Ramstetter

2017-01-01

This paper investigates the effects of foreign worker shares and MNE ownership on wages after controlling for worker sex and occupation in Malaysian manufacturing plants during 1994-1996, an important period during which use of foreign workers began to increase substantially. In a previous paper, I estimated similar wage equations separately for five occupation groups of both sexes in large heterogeneous samples of plants in many industries and more homogeneous samples of plants in seven indu...

Polychlorinated biphenyls in tree bark near a former manufacturing plant in Anniston, Alabama.

Science.gov (United States)

Hermanson, Mark H; Johnson, Glenn W

2007-05-01

Tree bark samples were collected to identify the relative amounts and congener profiles of atmospheric polychlorinated biphenyls dissolved into bark lipids from the gas phase in Anniston, Alabama, USA, where PCBs were manufactured from the 1920s until 1971. The area is heavily contaminated with PCBs: At least 4550 metric tons (mt) of PCB and 14000 mt of PCB distillation residue, known as Montar, remain buried in two landfills near the plant site. A minimum of 20.5 mt of PCBs were emitted to the atmosphere by the plant between 1953 and 1971 based on emissions figures for 1970. Bark results show that total PCB concentrations range over more than three orders of magnitude from 171927 ng/g lipid near the plant/landfill area, dropping exponentially to 35 ng/g lipid at a distance of about 7 km. The exponential trend is highly correlated (r=-0.77) and significant (ptree started growing after 1971 showing that atmospheric PCB concentrations remained high after PCB production ended. All PCB congener profiles show persistent congeners 31+28, 52, 66, 153, 138, and 180. Congener profiles from trees growing near the plant/landfill all have somewhat similar profiles but those growing during PCB production show high molecular mass compounds not usually found in the atmosphere and not found in younger trees, even in the most concentrated sample. We believe that high-temperature Montar disposal released high molecular mass PCBs into the gas phase which were dissolved into older tree bark lipids.

Sulfate metabolism. I. Sulfate uptake and redistribution of acid rain sulfate by edible plants

International Nuclear Information System (INIS)

Dallam, R.D.

1987-01-01

Sulfur is the major component of polluted air in industrialized societies. Atmospheric sulfur is converted to sulfuric acid through a series of chemical reactions which can eventually reenter many ecosystems. When edible plants are grown in soils containing varying amounts of sulfate, the roots take up and transport inorganic sulfate to the stems and leaves. The sulfate taken up by the roots and the amount transported to the stem and leaves was found to be a function of the concentration of sulfate in the soil. Inorganic sulfate taken up by a corn plant seedling can be rapidly converted to organic sulfate by the root system. Nine days after one of a pair of pea plants was inoculated with artificial acid rain sulfate (dilute H 2 35 SO 4 ) it was found that the sulfate was translocated not only in the inoculated plant, but also to the uninoculated pea plant in the same container. Also, when the leaves of a mature potato plant were inoculated with artificial acid rain sulfate it was found that the sulfate was translocated into the edible potatoes. Fractionation of the potatoes showed that most of the sulfate was water soluble of which 30% was inorganic sulfate and 70% was in the form of organic sulfur. One third of the non-water soluble translocated acid rain sulfate was equally divided between lipid and non-lipid organic sulfur of the potato. 9 references, 2 figures, 5 tables

Genetic analysis of pathway regulation for enhancing branched-chain amino acid biosynthesis in plants

KAUST Repository

Chen, Hao

2010-08-01

The branched-chain amino acids (BCAAs) valine, leucine and isoleucine are essential amino acids that play critical roles in animal growth and development. Animals cannot synthesize these amino acids and must obtain them from their diet. Plants are the ultimate source of these essential nutrients, and they synthesize BCAAs through a conserved pathway that is inhibited by its end products. This feedback inhibition has prevented scientists from engineering plants that accumulate high levels of BCAAs by simply over-expressing the respective biosynthetic genes. To identify components critical for this feedback regulation, we performed a genetic screen for Arabidopsis mutants that exhibit enhanced resistance to BCAAs. Multiple dominant allelic mutations in the VALINE-TOLERANT 1 (VAT1) gene were identified that conferred plant resistance to valine inhibition. Map-based cloning revealed that VAT1 encodes a regulatory subunit of acetohydroxy acid synthase (AHAS), the first committed enzyme in the BCAA biosynthesis pathway. The VAT1 gene is highly expressed in young, rapidly growing tissues. When reconstituted with the catalytic subunit in vitro, the vat1 mutant-containing AHAS holoenzyme exhibits increased resistance to valine. Importantly, transgenic plants expressing the mutated vat1 gene exhibit valine tolerance and accumulate higher levels of BCAAs. Our studies not only uncovered regulatory characteristics of plant AHAS, but also identified a method to enhance BCAA accumulation in crop plants that will significantly enhance the nutritional value of food and feed. © 2010 Blackwell Publishing Ltd.

Genetic analysis of pathway regulation for enhancing branched-chain amino acid biosynthesis in plants

KAUST Repository

Chen, Hao; Saksa, Kristen; Zhao, Feiyi; Qiu, Joyce; Xiong, Liming

2010-01-01

The branched-chain amino acids (BCAAs) valine, leucine and isoleucine are essential amino acids that play critical roles in animal growth and development. Animals cannot synthesize these amino acids and must obtain them from their diet. Plants

Accumulation of gentisic acid as associated with systemic infections but not with the hypersensitive response in plant-pathogen interactions.

Science.gov (United States)

Bellés, José M; Garro, Rafael; Pallás, Vicente; Fayos, Joaquín; Rodrigo, Ismael; Conejero, Vicente

2006-02-01

In the present work we have studied the accumulation of gentisic acid (2,5-dihydroxybenzoic acid, a metabolic derivative of salicylic acid, SA) in the plant-pathogen systems, Cucumis sativus and Gynura aurantiaca, infected with either prunus necrotic ringspot virus (PNRSV) or the exocortis viroid (CEVd), respectively. Both pathogens produced systemic infections and accumulated large amounts of the intermediary signal molecule gentisic acid as ascertained by electrospray ionization mass spectrometry (ESI-MS) coupled on line with high performance liquid chromatography (HPLC). The compound was found mostly in a conjugated (beta-glucoside) form. Gentisic acid has also been found to accumulate (although at lower levels) in cucumber inoculated with low doses of Pseudomonas syringae pv. tomato, producing a nonnecrotic reaction. In contrast, when cucumber was inoculated with high doses of this pathogen, a hypersensitive reaction occurred, but no gentisic-acid signal was induced. This is consistent with our results supporting the idea that gentisic-acid signaling may be restricted to nonnecrotizing reactions of the host plant (Bellés et al. in Mol Plant-Microbe Interact 12:227-235, 1999). In cucumber and Gynura plants, the activity of gentisic acid as inducing signal was different to that of SA, thus confirming the data found for tomato. Exogenously supplied gentisic acid was able to induce peroxidase activity in both Gynura and cucumber plants in a similar way as SA or pathogens. However, gentisic-acid treatments strongly induced polyphenol oxidase activity in cucumber, whereas pathogen infection or SA treatment resulted in a lower induction of this enzyme. Nevertheless, gentisic acid did not induce other defensive proteins which are induced by SA in these plants. This indicates that gentisic acid could act as an additional signal to SA for the activation of plant defenses in cucumber and Gynura plants.

Some biochemical reactions of strawberry plants to infection with Botrytis cinerea and salicylic acid treatment

Directory of Open Access Journals (Sweden)

Urszula Małolepsza

2013-12-01

Full Text Available The reactions of strawberry plants to infection with B. cinerea and treatment with salicylic acid has been studied. Infection of leaves with B. cinerea resulted in early increases in active oxygen species generation, superoxide dismutase and peroxidase activities and phenolic compounds content. Some increases of the above reactions were noticed in plants treated with salicylic acid but not in the plants treated with SA and then later infected with B. cinerea.

Additive Manufacturing and Characterization of Polylactic Acid (PLA) Composites Containing Metal Reinforcements

Science.gov (United States)

Kuentz, Lily; Salem, Anton; Singh, M.; Halbig, M. C.; Salem, J. A.

2016-01-01

Additive manufacturing of polymeric systems using 3D printing has become quite popular recently due to rapid growth and availability of low cost and open source 3D printers. Two widely used 3D printing filaments are based on polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) systems. PLA is much more environmentally friendly in comparison to ABS since it is made from renewable resources such as corn, sugarcane, and other starches as precursors. Recently, polylactic acid-based metal powder containing composite filaments have emerged which could be utilized for multifunctional applications. The composite filaments have higher density than pure PLA, and the majority of the materials volume is made up of polylactic acid. In order to utilize functionalities of composite filaments, printing behavior and properties of 3-D printed composites need to be characterized and compared with the pure PLA materials. In this study, pure PLA and composite specimens with different metallic reinforcements (Copper, Bronze, Tungsten, Iron, etc) were 3D printed at various layer heights and resulting microstructures and properties were characterized. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) behavior of filaments with different reinforcements were studied. The microscopy results show an increase in porosity between 3-D printed regular PLA and the metal composite PLA samples, which could produce weaker mechanical properties in the metal composite materials. Tensile strength and fracture toughness behavior of specimens as a function of print layer height will be presented.

Mass spectrometry of oil sands naphthenic acids : degradation in OSPW and wetland plants

Energy Technology Data Exchange (ETDEWEB)

Headley, J. [Environment Canada, Saskatoon, SK (Canada). Water Science and Technology Directorate

2009-07-01

This presentation discussed mass spectrometry of oil sands naphthenic acids and the degradation in OSPW and wetland plants. It presented background information on the Athabasca oil sands and naphthenic acids which involve a mixture of alkanes and cycloalkane carboxylic acids with aliphatic side chains. The presentation also discussed mass spectrometry with electrospray operating in negative ion modes. Loop injection, external standard methods and solid phase extraction were reviewed along with improved analysis by removing background ions. Other topics that were presented included hydroponic test systems and wetland plant toxicity, growth and transpiration. It was concluded that dissipation included species containing oxygen, ozone, O{sub 4}, and O{sub 5}. tabs., figs.

Development of marker-free transgenic Jatropha plants with increased levels of seed oleic acid

Directory of Open Access Journals (Sweden)

Qu Jing

2012-02-01

Full Text Available Abstract Background Jatropha curcas is recognized as a new energy crop due to the presence of the high amount of oil in its seeds that can be converted into biodiesel. The quality and performance of the biodiesel depends on the chemical composition of the fatty acids present in the oil. The fatty acids profile of the oil has a direct impact on ignition quality, heat of combustion and oxidative stability. An ideal biodiesel composition should have more monounsaturated fatty acids and less polyunsaturated acids. Jatropha seed oil contains 30% to 50% polyunsaturated fatty acids (mainly linoleic acid which negatively impacts the oxidative stability and causes high rate of nitrogen oxides emission. Results The enzyme 1-acyl-2-oleoyl-sn-glycero-3-phosphocholine delta 12-desaturase (FAD2 is the key enzyme responsible for the production of linoleic acid in plants. We identified three putative delta 12 fatty acid desaturase genes in Jatropha (JcFAD2s through genome-wide analysis and downregulated the expression of one of these genes, JcFAD2-1, in a seed-specific manner by RNA interference technology. The resulting JcFAD2-1 RNA interference transgenic plants showed a dramatic increase of oleic acid (> 78% and a corresponding reduction in polyunsaturated fatty acids (Jatropha had around 37% oleic acid and 41% polyunsaturated fatty acids. This indicates that FAD2-1 is the major enzyme responsible for converting oleic acid to linoleic acid in Jatropha. Due to the changes in the fatty acids profile, the oil of the JcFAD2-1 RNA interference seed was estimated to yield a cetane number as high as 60.2, which is similar to the required cetane number for conventional premium diesel fuels (60 in Europe. The presence of high seed oleic acid did not have a negative impact on other Jatropha agronomic traits based on our preliminary data of the original plants under greenhouse conditions. Further, we developed a marker-free system to generate the transgenic Jatropha

Nitro-fatty acids in plant signaling: New key mediators of nitric oxide metabolism

Directory of Open Access Journals (Sweden)

Capilla Mata-Pérez

2017-04-01

Full Text Available Recent studies in animal systems have shown that NO can interact with fatty acids to generate nitro-fatty acids (NO2-FAs. They are the product of the reaction between reactive nitrogen species and unsaturated fatty acids, and are considered novel mediators of cell signaling based mainly on a proven anti-inflammatory response. Although these signaling mediators have been described widely in animal systems, NO2-FAs have scarcely been studied in plants. Preliminary data have revealed the endogenous presence of free and protein-adducted NO2-FAs in extra-virgin olive oil (EVOO, which appear to be contributing to the cardiovascular benefits associated with the Mediterranean diet. Importantly, new findings have displayed the endogenous occurrence of nitro-linolenic acid (NO2-Ln in the model plant Arabidopsis thaliana and the modulation of NO2-Ln levels throughout this plant's development. Furthermore, a transcriptomic analysis by RNA-seq technology established a clear signaling role for this molecule, demonstrating that NO2-Ln was involved in plant-defense response against different abiotic-stress conditions, mainly by inducing the chaperone network and supporting a conserved mechanism of action in both animal and plant defense processes. Thus, NO2-Ln levels significantly rose under several abiotic-stress conditions, highlighting the strong signaling role of these molecules in the plant-protection mechanism. Finally, the potential of NO2-Ln as a NO donor has recently been described both in vitro and in vivo. Jointly, this ability gives NO2-Ln the potential to act as a signaling molecule by the direct release of NO, due to its capacity to induce different changes mediated by NO or NO-related molecules such as nitration and S-nitrosylation, or by the electrophilic capacity of these molecules through a nitroalkylation mechanism. Here, we describe the current state of the art regarding the advances performed in the field of NO2-FAs in plants and their

Relationship between plant growth and organic acid exudates from ...

African Journals Online (AJOL)

Plant–mycorrhizal interaction is an important association in the ecosystem with significant impacts on the physical, biological and chemical properties of the soil. In the present study, potential relationships that exist between organic acid production by ectomycorrhizal pine seedlings and plant parameters in the absence of ...

Changes of organic acid exudation and rhizosphere pH in rice plants under chromium stress

International Nuclear Information System (INIS)

Zeng Fanrong; Chen Song; Miao Ying; Wu Feibo; Zhang Guoping

2008-01-01

The effect of chromium (Cr) stress on the changes of rhizosphere pH, organic acid exudation, and Cr accumulation in plants was studied using two rice genotypes differing in grain Cr accumulation. The results showed that rhizosphere pH increased with increasing level of Cr in the culture solution and with an extended time of Cr exposure. Among the six organic acids examined in this experiment, oxalic and malic acid contents were relatively higher, and had a significant positive correlation with the rhizosphere pH, indicating that they play an important role in changing rhizosphere pH. The Cr content in roots was significantly higher than that in stems and leaves. Cr accumulation in plants was significantly and positively correlated with rhizosphere pH, and the exudation of oxalic, malic and citric acids, suggesting that an increase in rhizosphere pH, and exudation of oxalic, malic and citric acid enhances Cr accumulation in rice plants. - Rhizosphere pH and organic acid exudation of rice roots are markedly affected by chromium level in culture solution

The occurrence of p-coumaric acid and ferulic acid in fossil plant materials and their use as UV-proxy.

NARCIS (Netherlands)

Blokker, P.; Boelen, P.; Broekman, R.A.

2006-01-01

The applicability of p-coumaric acid and ferulic acid concentrations or ratios in (sub)fossil plant remnant as UV-B proxies relies on various aspects, which are discussed in this paper and will be illustrated with some experimental data. A newly developed THM-micropyrolysis-gas chromatography-mass

Project proposals on the creation of Russian-American joint enterprise for investigation, development and manufacture of power plants on the basis of solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Smotrov, N.V.; Kleschev, Yu.N.

1996-04-01

This paper describes a proposal for a joint Russian-American enterprise for performing scientific investigations, development, and manufacture of fuel cell power plants on the basis of the solid oxide fuel cell. RASOFCo. Russian-American Solid Oxide Fuel Cells Company. RASOFCo will provide the series output of the electrochemical generator (ECG) of 1kW power, then of 5kW and 10kW as well as the development and the output of 10kW power plant with the subsequent output of a power plant of greater power. An ECG based on solid oxide fuel cells uses methane as a fuel. Predicted technical characteristics, market analysis, assessment of potential demands for power plants of low power for Tyumentransgas, participants of the joint enterprise and their founding contributions, strategy for manufacture and financing, and management of RASOFCo are discussed.

Isolation of 14C labelled amino acids by biosynthesis in maize plants (Zea mais L.)

International Nuclear Information System (INIS)

Carreras, N.; Mazon, M.P.

1983-01-01

A method of obtaining 14 C labelled amino acids by biosynthesis in maize plants which had assimilated 14CO 2 , has been assayed. The plants were labelled for 60 minutes with 14 C O2 produced from Ba 14 C O3 (specific activity of 148 KBq/μmol). An extract of the soluble compounds was obtained with 80% ethanol and the amino acids were separated from the rest of the soluble compounds by ion exchange chromatography on column of Dowex 50-X8 resin. Finally, seventeen amino acids were isolated and identified from the purified extract. The acid amino acids were separated in anionic column (Dowex 1-X8) and the neutral and basic amino acids in cationic column (Dowex 50-X4). (Author) 56 refs

Isolation of carbon 14 labelled amino acids by biosynthesis in maize plants (zea mais L.)

International Nuclear Information System (INIS)

Carreras, N.; Mazon, M.P.

1983-01-01

A method of obtaining 14 C labelled amino acids by biosynthesis in maize plants which had assimilated 14 CO 2 , has been assayed. The plants were labelled for 60 minutes with 14 CO 2 produced from Ba 14 CO 3 (specific activity of 148 KBq/μmol). An extract of the soluble compounds was obtained with 80% ethanol and the amino acids were separated from the rest of the soluble compounds by ion exchange chromatography on column of Dowex 50-X8 resin. Finally, seventeen amino acids were isolated and identified from the purified extract. The acid amino acids were separated in anionic column (Dowex 1-X8) and the neutral and basic amino acids in cationic columns (Dowex 50-X4). (author)

Research of Manufacture Time Management System Based on PLM

Science.gov (United States)

Jing, Ni; Juan, Zhu; Liangwei, Zhong

This system is targeted by enterprises manufacturing machine shop, analyzes their business needs and builds the plant management information system of Manufacture time and Manufacture time information management. for manufacturing process Combined with WEB technology, based on EXCEL VBA development of methods, constructs a hybrid model based on PLM workshop Manufacture time management information system framework, discusses the functionality of the system architecture, database structure.

Good Manufacturing Practices and Microbial Contamination Sources in Orange Fleshed Sweet Potato Puree Processing Plant in Kenya

OpenAIRE

Malavi, Derick Nyabera; Muzhingi, Tawanda; Abong’, George Ooko

2018-01-01

Limited information exists on the status of hygiene and probable sources of microbial contamination in Orange Fleshed Sweet Potato (OFSP) puree processing. The current study is aimed at determining the level of compliance to Good Manufacturing Practices (GMPs), hygiene, and microbial quality in OFSP puree processing plant in Kenya. Intensive observation and interviews using a structured GMPs checklist, environmental sampling, and microbial analysis by standard microbiological methods were use...

Amino acid catabolism and generation of volatiles by lactic acid bacteria.

Science.gov (United States)

Tavaria, F K; Dahl, S; Carballo, F J; Malcata, F X

2002-10-01

Twelve isolates of lactic acid bacteria, belonging to the Lactobacillus, Lactococcus, Leuconostoc, and Enterococcus genera, were previously isolated from 180-d-old Serra da Estrela cheese, a traditional Portuguese cheese manufactured from raw milk and coagulated with a plant rennet. These isolates were subsequently tested for their ability to catabolize free amino acids, when incubated independently with each amino acid in free form or with a mixture thereof. Attempts were made in both situations to correlate the rates of free amino acid uptake with the numbers of viable cells. When incubated individually, leucine, valine, glycine, aspartic acid, serine, threonine, lysine, glutamic acid, and alanine were degraded by all strains considered; arginine tended to build up, probably because of transamination of other amino acids. When incubated together, the degradation of free amino acids by each strain was dependent on pH (with an optimum pH around 6.0). The volatiles detected in ripened Serra da Estrela cheese originated mainly from leucine, phenylalanine, alanine, and valine, whereas in vitro they originated mainly from valine, phenylalanine, serine, leucine, alanine, and threonine. The wild strains tested offer a great potential for flavor generation, which might justify their inclusion in a tentative starter/nonstarter culture for that and similar cheeses.

Improvement of nuclear power plants within the perspective of applications of lean manufacturing practices

Science.gov (United States)

Malek, A. K.; Muhammad, H. I.; Rosmaini, A.; Alaa, A. S.; Falah, A. M.

2017-09-01

Development and improvement process are essential to the companies and factories of various kinds and this necessity is related aspects of cost, time and risk that can be avoided, these aspects are available at the nuclear power stations essential demands cannot be ignored. The lean management technique is one of the recent trends in the management system. Where the lean management is stated as the system increases the customer value and reduces the wastage process in an industry or in a power plants. Therefore, there is an urgent necessity to ensure the development and improvement in nuclear power plants in the pre-established in process of being established and stage of the management and production. All of these stages according to the study are closely related to the necessity operationalize and apply lean manufacturing practices that these applications are ineffective and clear contribution to reduce costs and control of production processes and the process of reducing future risks that could be exposed to the station.

Application of contemporary integrated manufacture systems to nuclear power plants management

International Nuclear Information System (INIS)

Zhou Gang; Wang Lushuai; Tang Yaoyang

2005-01-01

In order to improve the safety, economy and reliability of the operation of a nuclear power plant (NPP), a novel integrated management method is proposed based on the 'integration' concept of the computer and contemporary integrated manufacture systems (CIMS). The design of integrated management system for NPP is studied. In the design of this system, information integration method based on the database and product data management (PDM) technology is adopted. In order to design and integrated management system satisfying the needs of NPP management, all activities of NPP are divided into different categories according to its characteristics. There are subsystems under the general management system to conduct the management work of different categories. All subsystems are interrelated in the environment of CIMS, but relatively independent. The application of CIMS to NPP provides a new way for scientific management of NPP, and makes the best of human, material and information resources. (authors)

Partnering with a local concrete block manufacturing plant to improve quality of construction materials in Haiti’s Central Plateau

Directory of Open Access Journals (Sweden)

Aaron Gordon

2016-09-01

Full Text Available This paper presents a successful ongoing partnership between Clemson Engineers for Developing Countries (CEDC and a concrete masonry unit (CMU manufacturing plant in rural Haiti. The infrastructure destruction and resulting loss of life of the 2010 earthquake in Haiti highlighted the need for improved building materials and codes. This partnership has helped to improve the strength of CMUs in the plant, both creating a safer local built environment and expanding the economic opportunities for this plant. Using samples of aggregate and cement from the site in Haiti, students in Clemson performed experiments to optimise the CMU mix design and made other suggestions to improve efficiency and quality of their product. Consistency continues to be a challenge for the CMU plant, and this paper also describes proposed procedures to help the plant implement quality control and quality assurance plans.

Enterobacter sp. I-3, a bio-herbicide inhibits gibberellins biosynthetic pathway and regulates abscisic acid and amino acids synthesis to control plant growth.

Science.gov (United States)

Radhakrishnan, Ramalingam; Park, Jae-Man; Lee, In-Jung

2016-12-01

Very few bacterial species were identified as bio-herbicides for weed control. The present research was focused to elucidate the plant growth retardant properties of Enterobacter sp. I-3 during their interaction by determining the changes in endogenous photosynthetic pigments, plant hormones and amino acids. The two bacterial isolates I-4-5 and I-3 were used to select the superior bacterium for controlling weed seeds (Echinochloa crus-galli L. and Portulaca oleracea L.) germination. The post-inoculation of I-3 (Enterobacter sp. I-3) significantly inhibited the weeds seed germination than their controls. The mechanism of bacterium induced plant growth reduction was identified in lettuce treated with I-3 bacterium and compared their effects with known chemical herbicide, trinexapac-ethyl (TE). The treatment of I-3 and TE showed a significant inhibitory effect on shoot length, leaf number, leaf length, leaf width, shoot weight, root weight and chlorophyll content in lettuce seedlings. The endogenous gibberellins (GAs) and abscisic acid (ABA) analysis showed that Enterobacter sp. I-3 treated plants had lower levels of GAs (GA 12 , GA 19 , GA 20 and GA 8 ) and GAs/ABA ratio and then, the higher level of ABA when compared to their controls. Indeed, the individual amino acids ie., aspartic acid, glutamic acid, glycine, threonine, alanine, serine, leucine, isoleucine and tyrosine were declined in TE and I-3 exposed plants. Our results suggest that the utilization of Enterobacter sp. I-3 inhibits the GAs pathway and amino acids synthesis in weeds to control their growth can be an alternative to chemical herbicides. Copyright © 2016 Elsevier GmbH. All rights reserved.

Manufacture of spent fuel chopper (Paper No. 26)

International Nuclear Information System (INIS)

Mohan Rao, A.; Suthar, R.L.; Mahajan, C.P.

1987-02-01

In-house manufacture of spent fuel chopper was the most significant step towards indigenisation of vital equipment needed in a spent fuel reprocessing plant. The chopper used in such a plant receives the highly radioactive spent fuel rods for chopping and distributing the cut pieces into desired online chemical processing equipment. Its design, engineering and manufacture has to be carefully planned and executed to ensure the reliability of the equipment for continuous safe operation, as well as the simplicity from the point of view of maintenance, which essentially has to be done using remote handling equipment. In this paper an attempt has been made to explain briefly the preparation of engineering details, manufacturing layouts and the problems encountered during the manufacture of some of the critical parts of the chopper. (author). 5 figs

Effect of salicylic acid on the growth photosynthesis and carbohydrate metabolism in salt stressed maize plants

International Nuclear Information System (INIS)

Moussa, H.R.; Khodary, S.E.A.

2003-01-01

Aqueous solutions of salicylic acid as a spray to Na CI-treated corn (Zea mays L,) significantly increased the growth of shoots and roots as measured after seven days of treatment. Spraying of salicylic acid caused significant increases in the activity of both ribulose 1,5 bisphosphate carboxylase (rubisco) enzyme and photosynthetic pigments. Moreover, salicylic acid treatment induced high values of soluble carbohydrate fractions in salt stressed plants as compared with salicylic acid treated samples. These data suggest that salicylic acid might improve the growth pattern of NaCl-treated maize plants via increasing the rate of photosynthesis and carbohydrate metabolism

[Epidemiology of contact hypersensitivity to rubber components in manufacturers of automobile tires at the Stomil plant].

Science.gov (United States)

Rubisz-Brzezińska, J; Bogdanowski, T; Brzezińska-Wcisło, L; Mozdzanowska, K; Bajcar, S

1990-01-01

Dermatological examination and patch tests with 34 rubber components were carried out in 114 tire manufacturers, 78 women and 36 men aged 29 years on average, with a mean duration of work in the plant 7 years. For correct interpretation of the obtained results patch tests with the same components were done in two control groups that is in 120 healthy subjects and 120 patients with contact dermatitis. Patch tests with proper concentrations of the studied components were evaluated after 48, 72 and 96 hours. Positive patch tests were found most frequently with antioxidants--16.6% (including IPPD--8.6%), followed by vulcanization accelerators--10.6%, and other rubber components--11.4% in all. During about 3 years of follow-up in 4 manufacturers contact allergic eczema was noted and polyvalent hypersensitivity to antioxidants and vulcanization accelerators without clinical manifestations of this hypersensitivity was diagnosed in 3 other subjects.

Distribution of perfluorooctane sulfonate and other perfluorochemicals in the ambient environment around a manufacturing facility in China.

Science.gov (United States)

Wang, Yawei; Fu, Jianjie; Wang, Thanh; Liang, Yong; Pan, Yuanyuan; Cai, Yaqi; Jiang, Guibin

2010-11-01

Perfluorinated compounds (PFCs) can be released to the surrounding environment during manufacturing and usage of PFC containing products, which are considered as main direct sources of PFCs in the environment. This study evaluates the release of perfluorooctane sulfonate (PFOS) and other PFCs to the ambient environment around a manufacturing plant. Among the nine PFCs analyzed, only PFOS, perfluorooctanoic acid (PFOA), and perfluorohexane sulfonate (PFHxS) were found in dust, water, soil, and chicken eggs. Very high concentrations of PFOS and PFOA were found in dust from the production storage, raw material stock room, and sulfonation workshop in the manufacturing facility, with the highest value at 4962 μg/g (dry weight) for PFOS and 160 μg/g for PFOA. A decreasing trend of the three PFCs concentrations in soils, water, and chicken eggs with increasing distance from the plant was found, indicating the production site to be the primary source of PFCs in this region. Risk quotients (RQs) assessment for surface water >500 m away from the plant were less than unity. Risk assessment of PFOS using predicted no-effect concentration (PNEC, 3.23 ng/g on a logarithmic scale) indicated no immediate ecological risk of a reduction in offspring survival. PFOS concentrations in most egg samples did not exceed the benchmark concentration derived in setting a reference dose for noncancer health effects (0.025 μg/(kgxd)).

Modelling the adoption of industrial cogeneration in Japan using manufacturing plant survey data

International Nuclear Information System (INIS)

Bonilla, David; Akisawa, Atsushi; Kashiwagi, Takao

2003-01-01

Electric power deregulation in Japan opens opportunity for further penetration of on-site generation (cogeneration) otherwise known as distributed generation. In the paper the authors present a survey on Japanese industrial plants to fill existing gaps for the assessment of modern cogeneration (combined heat and power, CHP). The objective of the paper is to empirically examine CHP systems based on cross-sectional binary models; second to review diffusion trends of CHP by system vintage during the 1980-2000 period in the manufacturing sector. The econometric results point that the probabilities of embracing this technology increase, in declining importance, with on-site power consumption, and steam demand, operational hours as well as with payback period, purchased power. For example the survey shows that the CHP is used for the purpose of exporting power rather than meeting the plant's own consumption. Some of our results are in line with those of Dismukes and Kleit (Resource Energy Econ. 21 (1999) 153) as well with Rose and Macdonald (Energy J. 12(12) (1991) 47). We also find that a unit increase in satisfaction with CHP will lead to a 54% in CHP capacity. We find significant evidence on the cost effectiveness of CHP under conservative assumptions. Regarding the influence of satisfaction and performance indicators for the several plants, the survey threw some unexpected evidence on the nature of CHP

The effects of surface-applied jasmonic and salicylic acids on caterpillar growth and damage to tomato plants

Science.gov (United States)

Aaron L. Iverson; Louis R. Iverson; Steve Eshita

2001-01-01

We tested the role of salicylic acid (SA) and jasmonic acid (JA) in altering the tomato plant's defense against herbivory by tobacco hornworm. Treatments of SA or JA were topically applied to tomato plants, hornworm consumption was allowed to proceed for 12 days, and harvest analyses were performed Measurements taken included a subjective plant rating (1-10 score...

Increased sensitivity of the respiratory system of plants grown in Gibberellic acid toward fluoride

Energy Technology Data Exchange (ETDEWEB)

Lustinec, J; Pokorna, V; Ruzicka, J

1962-01-01

Gibberellic acid in concentrations between 2 and 80 mg/l does not affect the ratio of radioactivities of /sup 14/CO/sub 2/ liberated from glucose-6-/sup 14/C and -1-/sup 14/C(C/sub 6//C/sub 1/) when acting for several hours on sliced wheat leaves, and that at a concentration of 10 mg/l it does not alter the degree of inhibition of respiration due to fluoride, iodoacetate and malonate or the consumption of oxygen. A linear relationship was established between the decrease in /sup 14/CO/sub 2/ liberation from glucose-/sup 14/C and the concentration of gibberellic acid. The C/sub 6//C/sub 1/ ratio as well as the absolute values of radioactivity decrease more rapidly in the course of several days after the germination of plants grown in a solution of gibberellic acid (10-20 mg/l) than in the water-grown controls. Fluoride inhibits the respiration of plants grown in gibberellic acid more than of those grown in water, its tissue concentration being either equal or less in the gibberellic -grown plants; the effect of iodoacetate and malonate is the same with plants of equal age (4 days) in both variants. 11 references, 1 figure, 4 tables.

The effect of the fast neutron current on the amino acid contents and nucleic acid synthesis in maize plants

International Nuclear Information System (INIS)

Akhundova, N.I.

2001-01-01

At the present time the effects of external influences on the genetic structures of the plant cells and the transmission of the accepted signals to other cellular structures and then to the whole organism have actively been studied. According to the opinion of a number of authors the gene expression and repression are immediate responses to the environment changes. To affect the plant genetic apparatus it is quite enough to expose it to some factors such as gamma rays, X- rays, neutron currents, saline-, temperature- or osmotic stresses. At the current stage of the research of the molecular mechanisms of the plant adaptation to the environment changes the priority goal is to ascertain the nature of the influence of the above mentioned factors on the processes of DNA replication and transcription, as the nucleic acids are the targets for external effects. The fast neutron current is one of the factors that influence the plant growth and development. Unlike gamma rays, the mechanism of the neutron irradiation on the plant genetic apparatus is very poorly studied. The objective of our research was the study of the fast neutron current effects on the DNA replication and transcription processes and amino acid synthesis in the irradiated maize plants

A broad-spectrum, efficient and nontransgenic approach to control plant viruses by application of salicylic acid and jasmonic acid.

Science.gov (United States)

Shang, Jing; Xi, De-Hui; Xu, Fei; Wang, Shao-Dong; Cao, Sen; Xu, Mo-Yun; Zhao, Ping-Ping; Wang, Jian-Hui; Jia, Shu-Dan; Zhang, Zhong-Wei; Yuan, Shu; Lin, Hong-Hui

2011-02-01

Plant viruses cause many diseases that lead to significant economic losses. However, most of the approaches to control plant viruses, including transgenic processes or drugs are plant-species-limited or virus-species-limited, and not very effective. We introduce an application of jasmonic acid (JA) and salicylic acid (SA), a broad-spectrum, efficient and nontransgenic method, to improve plant resistance to RNA viruses. Applying 0.06 mM JA and then 0.1 mM SA 24 h later, enhanced resistance to Cucumber mosaic virus (CMV), Tobacco mosaic virus (TMV) and Turnip crinkle virus (TCV) in Arabidopsis, tobacco, tomato and hot pepper. The inhibition efficiency to virus replication usually achieved up to 80-90%. The putative molecular mechanism was investigated. Some possible factors affecting the synergism of JA and SA have been defined, including WRKY53, WRKY70, PDF1.2, MPK4, MPK2, MPK3, MPK5, MPK12, MPK14, MKK1, MKK2, and MKK6. All genes involving in the synergism of JA and SA were investigated. This approach is safe to human beings and environmentally friendly and shows potential as a strong tool for crop protection against plant viruses.

Concentrations and distribution of polybrominated diphenyl ethers (PBDEs) in soils and plants from a deca-BDE manufacturing factory in China.

Science.gov (United States)

Li, Yuan; Niu, Shan; Hai, Reti; Li, Meng

2015-01-01

Residues of polybrominated diphenyl ethers (PBDEs), including eight PBDE congeners, were investigated in soils and plants from a deca-BDE manufacturing factory located in the Shandong province of China to evaluate and discuss their pollution level and distribution. Total concentrations in topsoil ranged from 17.0 to 146 μg g(-1) dry weight (dw) with a mean value of 58.7 μg g(-1) dw. BDE-209 was the dominant congener in soils, accounting for 55.63-99.27 % of the total PBDEs. Concentrations and congener patterns in soils varied among different soil depths. Concentration levels in topsoil are high and the heavy accumulation in deep soil also can be observed, even for some sites, the concentrations in 50-100 cm depth are higher than in topsoil. In plant samples, total PBDE concentrations and the proportion of BDE-209 were high (69.92-99.10 %). The extent of pollution by PBDEs in the deca-BDE production factory was higher than in other regions, and the environmental risk caused by the production of deca-BDE is of concern. This is the first study to report pollution of PBDEs in soils and plants from the vicinity of a deca-BDE manufacturing factory.

Global Production Planning Process considering the Supply Risk of Overseas Manufacturing Sites

Directory of Open Access Journals (Sweden)

Hosang Jung

2015-01-01

Full Text Available Although global manufacturers can produce most of their final products in local plants, they need to source components or parts from desirable overseas manufacturing partners at low cost in order to fulfill customer orders. In this global manufacturing environment, capacity information for planning is usually imprecise owing to the various risks of overseas plants (e.g., foreign governments’ policies and labor stability. It is therefore not easy for decision-makers to generate a global production plan showing the production amounts at local plants and overseas manufacturing facilities operated by manufacturing partners. In this paper, we present a new global production planning process considering the supply risk of overseas manufacturing sites. First, local experts estimate the supply capacity of an overseas plant using their judgment to determine when the risk could occur and how large the risk impact would be. Next, we run a global production planning model with the estimated supply capacities. The proposed process systematically adopts the qualitative judgments of local experts in the global production planning process and thus can provide companies with a realistic global production plan. We demonstrate the applicability of the proposed process with a real world case.

Environmentally acceptable endpoints for PAHs at a manufactured gas plant site

Energy Technology Data Exchange (ETDEWEB)

Stroo, H.F.; Jensen, R.; Loehr, R.C.; Nakles, D.V.; Fairbrother, A.; Liban, C.B. [ThermoRetec Corp., Carson, CA (USA)

2000-09-01

Samples from a former manufactured gas plant (MGP) site in Santa Barbara, CA were tested to evaluate the environmentally acceptable endpoints (EAE) process for setting risk-based cleanup criteria. The research was part of an ongoing effort to develop and demonstrate a protocol for assessing risk-based criteria for MGP sites that incorporates the availability of polycyclic aromatic hydrocarbons (PAHs). Six soil samples were subjected to a battery of physical and biological tests that focused on determining the 'availability' of the soil-bound contaminants to groundwater, ecological receptors, and human receptors. Results demonstrated that sorption to soil, matrix effects, aging, and treatment can significantly reduce chemical availability. Including these reduced availability results in risk assessment calculations yielded environmentally protective cleanup levels almost 3-10 times greater than levels derived using California default risk assessment assumptions. Using an EAE-based approach for MGP soils, especially those containing lampblack, could provide more realistic risk assessment. 23 refs., 6 tabs.

Lead sulfate nano- and microparticles in the acid plant blow-down generated at the sulfuric acid plant of the El Teniente mine, Chile.

Science.gov (United States)

Barassi, Giancarlo M; Klimsa, Martin; Borrmann, Thomas; Cairns, Mathew J; Kinkel, Joachim; Valenzuela, Fernando

2014-12-01

The acid plant 'blow-down' (also called weak acid) produced at El Teniente mine in Chile was characterized. This liquid waste (tailing) is generated during the cooling and cleaning of the smelter gas prior to the production of sulfuric acid. The weak acid was composed of a liquid and a solid phase (suspended solids). The liquid phase of the sample analyzed in this study mainly contained Cu (562 mg L(-1)), SO4(2-) (32 800 mg L(-1)), Ca (1449 mg L(-1)), Fe (185 mg L(-1)), As (6 mg L(-1)), K (467 mg L(-1)) and Al (113 mg L(-1)). Additionally, the sample had a pH-value and total acidity of 0.45 and 2970 mg L(-1) as CaCO3, respectively. Hence, this waste was classified as extremely acidic and with a high metal content following the Ficklin diagram classification. Elemental analysis using atomic absorption, inductively coupled plasma, X-ray diffraction and electron microscopy showed that the suspended solids were anglesite (PbSO4) nano- and microparticles ranging from 50 nm to 500 nm in diameter.

Achievement report on developing inverse manufacturing system in fiscal 1998; 1998 nendo inverse manufacturing system no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development has been performed on a circulating type production system, or an inverse manufacturing system, to minimize the environmental load in the entire life cycle of industrial products from design to manufacturing, maintenance, recovery, and re-utilization. In developing the recycling information system, discussion and extraction were executed on the data to be exchanged between manufacturers and users in the inverse society. A new individual parts history control system was developed. In developing the recycling processing system, a prototype system was evaluated by using hypothetical data, wherein the possibility of improving the recycling processing efficiency and reducing the cost was verified. In addition, trial design was made on a recycling processing plant in consideration of the cost effect to get the future plant image. In fabricating the inverse manufacturing products, a prototype concept model was made for information terminal devices. Development was performed on such elementary technologies as the easy-to-disintegrate structure technology, self-integration connecting structure and environmental hysteresis detection system. (NEDO)

Source removal strategy development for manufactured gas plant sites

International Nuclear Information System (INIS)

Golchin, J.; Nelson, S.

1994-01-01

A source removal action plan was developed by Midwest Gas and the Iowa Department of Natural Resources to address the source coal tar contamination within the underground gas holder basin at former Manufactured Gas Plant (MGP) sites. The procedure utilizes a mixture of coal, contaminated soil and coal rat sludge to provide a material that had suitable material handling characteristics for shipment and burning in high efficiency utility boilers. Screening of the mixture was required to remove oversized debris and ferrous metal. The resulting mixture did not exhibit toxic characteristics when tested under the Toxicity Characteristics Leaching Procedure (TCLP). Test results on the coal tar sludges have indicated that the more pure coal tar materials may fail the TCLP test and be classified as a RCRA hazardous waste. The processing procedure was designed to stabilize the coal tar sludges and render those sludges less hazardous and, as a result, able to pass the TCLP test. This procedure was adopted by the Edison Electric Institute to develop a national guidance document for remediation of MGP sites. The EPA Office of Solid Waste and Emergency Response recommended this strategy to the Regional Waste Management Directors as a practical tool for handling wastes that may exhibit the RCRA characteristics

PREVENTION AND CONTROL OF DIMETHYLAMINE VAPORS EMISSION: HERBICIDE PRODUCTION PLANT

Directory of Open Access Journals (Sweden)

Zorana Arsenijević

2008-11-01

Full Text Available The widely used herbicide, dimethylamine salt of 2,4-dichlorophenoxy acetic acid (2,4-D-DMA, is usually prepared by mixing a dimethylamine (DMA aqueous solution with a solid 2,4-dichlorophenoxy acetic acid (2,4-D. The vapors of the both, reactants and products, are potentially hazardous for the environment. The contribution of DMA vapors in overall pollution from this process is most significant, concerning vapor pressures data of these pollutants. Therefore, the control of the air pollution in the manufacture and handling of methylamines is very important. Within this paper, the optimal air pollution control system in preparation of 2,4-D-DMA was developed for the pesticides manufacturing industry. This study employed the simple pollution prevention concept to reduce the emission of DMA vapors at the source. The investigations were performed on the pilot plant scale. To reduce the emission of DMA vapors, the effluent gases from the herbicide preparation zone were passed through the packed bed scrubber (water - scrubbing medium, and the catalytic reactor in sequence. The end result is a substantially improved air quality in the working area, as well as in the urbanized areas located near the chemical plant.

UV-C-Induced alleviation of transcriptional gene silencing through plant–plant communication: Key roles of jasmonic acid and salicylic acid pathways

Energy Technology Data Exchange (ETDEWEB)

Xu, Wei; Wang, Ting [Key Laboratory of Ion Beam Bio-engineering, Hefei Institutes of Physical Science, Chinese Academy of Sciences, P.O. Box 1138, Hefei, Anhui, 230031 (China); Xu, Shaoxin [School of physics and materials science, Anhui University, Hefei, Anhui, 230601 (China); Li, Fanghua; Deng, Chenguang; Wu, Lijun; Wu, Yuejin [Key Laboratory of Ion Beam Bio-engineering, Hefei Institutes of Physical Science, Chinese Academy of Sciences, P.O. Box 1138, Hefei, Anhui, 230031 (China); Bian, Po, E-mail: bianpo@ipp.ac.cn [Key Laboratory of Ion Beam Bio-engineering, Hefei Institutes of Physical Science, Chinese Academy of Sciences, P.O. Box 1138, Hefei, Anhui, 230031 (China)

2016-08-15

Highlights: • Transcriptional gene silencing (TGS) in plants can be epigenetically alleviated by volatile signals from UV-C- irradiated neighboring plants. • Alleviation of TGS can be induced by UV-C irradiation through plant–plant–plant communication. • JA and SA signals take part in interplant communication for alleviation of TGS. - Abstract: Plant stress responses at the epigenetic level are expected to allow more permanent changes of gene expression and potentially long-term adaptation. While it has been reported that plants subjected to adverse environments initiate various stress responses in their neighboring plants, little is known regarding epigenetic responses to external stresses mediated by plant–plant communication. In this study, we show that DNA repetitive elements of Arabidopsis thaliana, whose expression is inhibited epigenetically by transcriptional gene silencing (TGS) mechanism, are activated by UV-C irradiation through airborne plant–plant and plant–plant–plant communications, accompanied by DNA demethylation at CHH sites. Moreover, the TGS is alleviated by direct treatments with exogenous methyl jasmonate (MeJA) and methyl salicylate (MeSA). Further, the plant–plant and plant–plant–plant communications are blocked by mutations in the biosynthesis or signaling of jasmonic acid (JA) or salicylic acid (SA), indicating that JA and SA pathways are involved in the interplant communication for epigenetic responses. For the plant–plant–plant communication, stress cues are relayed to the last set of receiver plants by promoting the production of JA and SA signals in relaying plants, which exhibit upregulated expression of genes for JA and SA biosynthesis and enhanced emanation of MeJA and MeSA.

UV-C-Induced alleviation of transcriptional gene silencing through plant–plant communication: Key roles of jasmonic acid and salicylic acid pathways

International Nuclear Information System (INIS)

Xu, Wei; Wang, Ting; Xu, Shaoxin; Li, Fanghua; Deng, Chenguang; Wu, Lijun; Wu, Yuejin; Bian, Po

2016-01-01

Highlights: • Transcriptional gene silencing (TGS) in plants can be epigenetically alleviated by volatile signals from UV-C- irradiated neighboring plants. • Alleviation of TGS can be induced by UV-C irradiation through plant–plant–plant communication. • JA and SA signals take part in interplant communication for alleviation of TGS. - Abstract: Plant stress responses at the epigenetic level are expected to allow more permanent changes of gene expression and potentially long-term adaptation. While it has been reported that plants subjected to adverse environments initiate various stress responses in their neighboring plants, little is known regarding epigenetic responses to external stresses mediated by plant–plant communication. In this study, we show that DNA repetitive elements of Arabidopsis thaliana, whose expression is inhibited epigenetically by transcriptional gene silencing (TGS) mechanism, are activated by UV-C irradiation through airborne plant–plant and plant–plant–plant communications, accompanied by DNA demethylation at CHH sites. Moreover, the TGS is alleviated by direct treatments with exogenous methyl jasmonate (MeJA) and methyl salicylate (MeSA). Further, the plant–plant and plant–plant–plant communications are blocked by mutations in the biosynthesis or signaling of jasmonic acid (JA) or salicylic acid (SA), indicating that JA and SA pathways are involved in the interplant communication for epigenetic responses. For the plant–plant–plant communication, stress cues are relayed to the last set of receiver plants by promoting the production of JA and SA signals in relaying plants, which exhibit upregulated expression of genes for JA and SA biosynthesis and enhanced emanation of MeJA and MeSA.

Effects of intermittent acid rain on proline and antioxidant content on medicinal plant “Pereskia bleo”

Science.gov (United States)

Sulandjari; Dewi, W. S.

2018-03-01

Global warming due to CO2 and other greenhouse gas emissions from human activities have led to climate change and environmental degradation. The acid rain, with the pH of rainwater below 5.6, is a serious environmental problem. Arising from air pollution and potentially harmful to health, it can damage old buildings and distract the growth and physiological metabolism of sensitive plants. How does the influence of climate change on medicinal plants such as Pereskia bleo? The leaf of Pereskia bleo (Kunth) DC. contains high antioxidants with benefits for anti-cancer, anti-tumor, anti-rheumatic, and anti-inflammatory. This research aims to investigate the influence of acid rain on the proline level and antioxidant content of Pereskia bleo. Having been carried out from June to August in Jogjakarta, this study was conducted through the use of artificial acid rain with pH 5.8, 4.9, 3.7 and 2.9, by adding sulfate acid (H2SO4) to rainwater. The interval of intermittent watering acid rain to the plants is once a day, twice a day, and once in three days with three replications for six weeks. The results showed that Acid rain with a pH less than 4.9 and the intermittent interval of acid rain twice a day and once in three days significantly suppresses growth and chlorophyll content. In contrast, it increases the proline and antioxidant levels as a tolerant action of the plant.

Synthesis Of 2- (1- Naphthyl) Ethanoic Acid ( Plant Growth Regulator ) From Coal Tar And Its Application

International Nuclear Information System (INIS)

Khin Mooh Theint; Tin Myint Htwe

2011-12-01

Plant growth regulators, which are commonly called as plant hormones, naturally produced non-nutrient chemical compounds involved in growth and development. Among the various kinds of plant growth regulators, 2- (1- Naphthyl ) ethanoic acid especially encourages the root development of the plant. In this work, NAA was successfuly synthesized from naphthalene which was extracted from coal tar. The purity of naphthalene, -Chloromethyl naphthalene, -Naphthyl acetonitrile, - Naphthyl acetic acid or 2 - ( 1-Naphthyl ) ethanoic acid were also confirmed by Thin Layer Chromatography, and by spectroscopy methods. The yield percent of NAA based on naphthalene was found to be 2.1%. The yield percent of naphthaleneFrom coal tar is found to be 4.09%. The effect of NAA on root development was also studied in different concentrations of soy bean (Glycine max)and cow pea (Vigna catjang walp).

Whither North Carolina furniture manufacturing?

OpenAIRE

Robert L. Lacy

2004-01-01

North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

Former manufactured gas plants of Missouri: 19th century enigmas of today's site and waste characterization

International Nuclear Information System (INIS)

Hatheway, A.W.; Anderson, D.R.

1993-01-01

Missouri's first gas works began operation in 1845 (St. Louis). By 1900, gas works operated in many northern-Missouri coal belt towns, major cities, and Hannibal and Cape Girardeau (Mississippi River supply). Today's 40-odd former manufactured gas plant (FMPGs) sites are fiscal nightmares for parent utility companies; all hazardous waste groups are prevalent to the plants. Tar residuals may migrate along/through geologic anomalies. Tar-water emulsions typically were disposed in tar wells or nearby drainages or many times plumbed directly into sewers, which typically leaked into the environment at unpredictable down gradient locations. Just as well site geologic characteristics and current groundwater usage may render FMPGs relatively harmless from the human exposure standpoint. Geologic deduction, photo interpretation, careful subsurface exploration and engineering geophysics can locate hot spots and delimit contaminant migration. Many types of historic documents chronicle changes in plant character and equipment, as well as mode of operation. Without such details, mistakes in characterization are likely and errors in risk assessment and selection of remedial technologies are possible

Easy synthesis of graphene sheets from alfalfa plants by treatment of nitric acid

International Nuclear Information System (INIS)

Qu, Jiao; Luo, Chunqiu; Zhang, Qian; Cong, Qiao; Yuan, Xing

2013-01-01

Highlights: ► An easy method for synthesis of graphene sheets using alfalfa plants was introduced. ► An novelty formation mechanism of graphene sheets using alfalfa plants was proposed. ► This method exploits a new carbon source and provides a novel idea to synthesize graphene sheets. -- Abstract: This letter focuses on synthesis of graphene sheets from alfalfa plants by treatment of nitric acid. The transmission electron microscopy image (TEM) demonstrates that the graphene sheets are agglomerated and overlapped, the energy dispersive spectrum (EDS) indicates that the products are pure, and the Raman spectrum shows the graphene sheets are well graphitized. In addition, the formation mechanism of the graphene sheets from alfalfa plants by treatment nitric acid is discussed. These findings inspire the search for a new strategy for synthesis of graphene sheets from renewable natural products, and the lower cost of this new process and carbon source may facilitate industrial production

Easy synthesis of graphene sheets from alfalfa plants by treatment of nitric acid

Energy Technology Data Exchange (ETDEWEB)

Qu, Jiao, E-mail: qujiao@bhu.edu.cn [School of Chemistry and Chemical Engineering, Bohai University, Jinzhou 121013 (China); School of Urban and Environmental Sciences, Northeast Normal University, Changchun 130024 (China); Luo, Chunqiu, E-mail: fplj_lcq@163.com [School of Chemistry and Chemical Engineering, Bohai University, Jinzhou 121013 (China); Zhang, Qian; Cong, Qiao [School of Chemistry and Chemical Engineering, Bohai University, Jinzhou 121013 (China); Yuan, Xing [School of Urban and Environmental Sciences, Northeast Normal University, Changchun 130024 (China)

2013-04-01

Highlights: ► An easy method for synthesis of graphene sheets using alfalfa plants was introduced. ► An novelty formation mechanism of graphene sheets using alfalfa plants was proposed. ► This method exploits a new carbon source and provides a novel idea to synthesize graphene sheets. -- Abstract: This letter focuses on synthesis of graphene sheets from alfalfa plants by treatment of nitric acid. The transmission electron microscopy image (TEM) demonstrates that the graphene sheets are agglomerated and overlapped, the energy dispersive spectrum (EDS) indicates that the products are pure, and the Raman spectrum shows the graphene sheets are well graphitized. In addition, the formation mechanism of the graphene sheets from alfalfa plants by treatment nitric acid is discussed. These findings inspire the search for a new strategy for synthesis of graphene sheets from renewable natural products, and the lower cost of this new process and carbon source may facilitate industrial production.

Hanford waste vitrification plant hydrogen generation study: Preliminary evaluation of alternatives to formic acid

International Nuclear Information System (INIS)

King, R.B.; Bhattacharyya, N.K.; Kumar, V.

1996-02-01

Oxalic, glyoxylic, glycolic, malonic, pyruvic, lactic, levulinic, and citric acids as well as glycine have been evaluated as possible substitutes for formic acid in the preparation of feed for the Hanford waste vitrification plant using a non-radioactive feed stimulant UGA-12M1 containing substantial amounts of aluminum and iron oxides as well as nitrate and nitrite at 90C in the presence of hydrated rhodium trichloride. Unlike formic acid none of these carboxylic acids liberate hydrogen under these conditions and only malonic and citric acids form ammonia. Glyoxylic, glycolic, malonic, pyruvic, lactic, levulinic, and citric acids all appear to have significant reducing properties under the reaction conditions of interest as indicated by the observation of appreciable amounts of N 2 O as a reduction product of,nitrite or, less likely, nitrate at 90C. Glyoxylic, pyruvic, and malonic acids all appear to be unstable towards decarboxylation at 90C in the presence of Al(OH) 3 . Among the carboxylic acids investigated in this study the α-hydroxycarboxylic acids glycolic and lactic acids appear to be the most interesting potential substitutes for formic acid in the feed preparation for the vitrification plant because of their failure to produce hydrogen or ammonia or to undergo decarboxylation under the reaction conditions although they exhibit some reducing properties in feed stimulant experiments

Relationship of Melatonin and Salicylic Acid in Biotic/Abiotic Plant Stress Responses

OpenAIRE

Josefa Hernández-Ruiz; Marino B. Arnao

2018-01-01

Melatonin (N-acetyl-5-methoxytryptamine) was discovered in plants in 1995, while salicylic acid was the name given to the active ingredient of willow in 1838. From a physiological point of view, these two molecules present in plants have never been compared, even though they have a great number of similarities, as we shall see in this work. Both molecules have biosynthesis pathways that share a common precursor and both play a relevant role in the physiology of plants, especially in aspects r...

Enhanced plant regeneration in lemna minor by amino acids

International Nuclear Information System (INIS)

Yang, L.; Han, H.; Zhou, K.; Ren, C.; Zhu, Y.

2014-01-01

In present study we investigated the effects of different L-amino acids on the plant regeneration from callus of Lemna minor, and established an efficient protocol. Among the 20 L-amino acids, only L-Ser and L-Gly showed significant improving effect, with the optimal concentration being 1 mM and 1.5 mM, respectively. A regeneration frequency of 46% was observed when the callus transferred to the regeneration medium with addition of 1 mM L-Ser for 11 days. After 26 days of cultivation, the frond regeneration achieved 100% and 94% for 1 mM L-Ser and 1.5 mM L-Gly treatment, respectively. (author)

Historical reconstruction of polychlorinated biphenyl (PCB) exposures for workers in a capacitor manufacturing plant.

Science.gov (United States)

Hopf, Nancy B; Ruder, Avima M; Waters, Martha A

2014-05-01

We developed a semiquantitative job exposure matrix (JEM) for workers exposed to polychlorinated biphenyls (PCBs) at a capacitor manufacturing plant from 1946 to 1977. In a recently updated mortality study, mortality of prostate and stomach cancer increased with increasing levels of cumulative exposure estimated with this JEM (trend p values = 0.003 and 0.04, respectively). Capacitor manufacturing began with winding bales of foil and paper film, which were placed in a metal capacitor box (pre-assembly), and placed in a vacuum chamber for flood-filling (impregnation) with dielectric fluid (PCBs). Capacitors dripping with PCB residues were then transported to sealing stations where ports were soldered shut before degreasing, leak testing, and painting. Using a systematic approach, all 509 unique jobs identified in the work histories were rated by predetermined process- and plant-specific exposure determinants; then categorized based on the jobs' similarities (combination of exposure determinants) into 35 job exposure categories. The job exposure categories were ranked followed by a qualitative PCB exposure rating (baseline, low, medium, and high) for inhalation and dermal intensity. Category differences in other chemical exposures (solvents, etc.) prevented further combining of categories. The mean of all available PCB concentrations (1975 and 1977) for jobs within each intensity rating was regarded as a representative value for that intensity level. Inhalation (in microgram per cubic milligram) and dermal (unitless) exposures were regarded as equally important. Intensity was frequency adjusted for jobs with continuous or intermittent PCB exposures. Era-modifying factors were applied to the earlier time periods (1946-1974) because exposures were considered to have been greater than in later eras (1975-1977). Such interpolations, extrapolations, and modifying factors may introduce non-differential misclassification; however, we do believe our rigorous method

Redesigning Manufacturing Footprint from Dynamic Perspective

DEFF Research Database (Denmark)

Yang, Cheng; Farooq, Sami; Johansen, John

2009-01-01

footprint to address the constantly emerging new challenges by giving a holistic approach from dynamic perspective. Three Danish companies are presented. The way they developed their international manufacturing networks is analysed historically, and their redesigning of manufacturing footprint is expressed...... as how to re-assign portfolios of products and processes between specific plants within the same manufacturing network at one point in time. The strategic factors that have impact on such decisions are discussed and classified into two groups. Last, a holistic framework and a process model is presented...

77 FR 46371 - National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing...

Science.gov (United States)

2012-08-03

...-AQ93 National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing... Portland Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants,'' which was... Manufacturing Industry and Standards of Performance for Portland Cement Plants'' under Docket ID No. EPA-HQ-OAR...

Robotics In Manufacturing: Army View

Science.gov (United States)

Michel, F. J.

1983-05-01

(Figure 1) This is an outline of my presentation today. The U. S. Army has a dual interest in the use of robots, namely: 1. As a substitute for or an extension of the soldier in the battlefield, and 2. in the factories that make Army materiel, or - as we call it -the the production base. The Production Base can again be divided into three separate segments, i.e., the Army owned and operated facilities or GOG6s, such as Rock Island and Watervliet arsenals, and not to be overlooked, the depot operations. There the Army manufactures gun tubes and other related parts for artillery weapons and repairs and overhauls them. A second category is the Army owned and contractor operated facilities or GOCOs,such as the ammunition plants, the tank plants at Lima, Ohio and Warren, Michigan and the Stratford Engine Plant in Connecticut where gas turbines for helicopter and the Abrams tank are manufactured. The last category covers the industrial base, that is those factories which are not only operated but also owned by the contractor himself also referred to as COCOs. You can see from this description that the Army is supported by a base which produces a diversified line of products. Therefore, the task of technology development and technology insertion is considerably more complex than what one encounters in the average U. S. Manufacturing organization.

The COP9 signalosome controls jasmonic acid synthesis and plant responses to herbivory and pathogens.

Science.gov (United States)

Hind, Sarah R; Pulliam, Sarah E; Veronese, Paola; Shantharaj, Deepak; Nazir, Azka; Jacobs, Nekaiya S; Stratmann, Johannes W

2011-02-01

The COP9 signalosome (CSN) is a multi-protein complex that regulates the activities of cullin-RING E3 ubiquitin ligases (CRLs). CRLs ubiquitinate proteins in order to target them for proteasomal degradation. The CSN is required for proper plant development. Here we show that the CSN also has a profound effect on plant defense responses. Silencing of genes for CSN subunits in tomato plants resulted in a mild morphological phenotype and reduced expression of wound-responsive genes in response to mechanical wounding, attack by Manduca sexta larvae, and Prosystemin over-expression. In contrast, expression of pathogenesis-related genes was increased in a stimulus-independent manner in these plants. The reduced wound response in CSN-silenced plants corresponded with reduced synthesis of jasmonic acid (JA), but levels of salicylic acid (SA) were unaltered. As a consequence, these plants exhibited reduced resistance against herbivorous M. sexta larvae and the necrotrophic fungal pathogen Botrytis cinerea. In contrast, susceptibility to tobacco mosaic virus (TMV) was not altered in CSN-silenced plants. These data demonstrate that the CSN orchestrates not only plant development but also JA-dependent plant defense responses. © 2011 The Authors. The Plant Journal © 2011 Blackwell Publishing Ltd.

Over-expression of SlJA2 decreased heat tolerance of transgenic tobacco plants via salicylic acid pathway.

Science.gov (United States)

Liu, Zhong-Ming; Yue, Meng-Meng; Yang, Dong-Yue; Zhu, Shao-Bo; Ma, Na-Na; Meng, Qing-Wei

2017-04-01

Over-expression of SlJA2 decreased the accumulation of SA, which resulted in significant physiological and gene expression changes in transgenic tobacco plants, leading to the decreased heat tolerance of transgenic tobacco. NAC family, the largest transcription factors in plants, responses to different environmental stimuli. Here, we isolated a typical NAC transcription factor (SlJA2) from tomato and got transgenic tobacco with SlJA2 over-expression. Expression of SlJA2 was induced by heat stress (42 °C), chilling stress (4 °C), drought stress, osmotic stress, abscisic acid, and salicylic acid. Over-expression of SlJA2 decreased the accumulation of salicylic acid by regulating expression of salicylic acid degradation gene under heat stress. Compared to WT plants, stomatal apertures and water loss increased in transgenic plants, and the damage of photosynthetic apparatus and chlorophyll breakdown were more serious in transgenic plants under heat stress. Meanwhile, more H 2 O 2 and O 2 ·- were accumulated transgenic plants and proline synthesis was restricted, which resulted in more serious oxidative damage compared to WT. qRT-PCR analysis showed that over-expression of SlJA2 could down-regulate genes involved in reactive oxygen species scavenging, proline biosynthesis, and response to heat stress. All the above results indicated that SlJA2 may be a negative regulator responded to plant's heat tolerance. Thus, this study provides new insight into roles of NAC family member in plant response to abiotic stress.

RPC industries - UV and EB equipment manufacturers

International Nuclear Information System (INIS)

Rodrigues, A.M.

1987-01-01

RPC Industries has been manufacturing electron beam and ultraviolet equipment for the industrial processing of materials for more than 15 years. RPC maintains its headquarters and electron processor manufacturing plant in Hayward, California. UV equipment is made in the company's plant near Chicago. Sales offices are maintained in New York, Illinois, and California in the USA, and in Germany, Japan, Australia, Italy, Israel, and Sweden. Complete testing and pilot facilities are available in Hayward (EB) and near Chicago (UV). Described below are the basic system components, applications and advantages of RPC's UV and EB systems. (orig.)

Recent advances in fuel product and manufacturing process development

International Nuclear Information System (INIS)

Slember, R.J.; Doshi, P.K.

1987-01-01

This paper discusses advancements in commercial nuclear fuel products and manufacturing made by the Westinghouse Electric Corporation in response to the commercial nuclear fuel industry's demand for high reliability, increased plant availability and improved operating flexibility. The features and benefits of Westinghouse's most advanced fuel products--VANTAGE 5 for PWR plants and QUAD+ for BWR plants--are described, as well as 'high performance' fuel concepts now under development for delivery in the late 1980s. The paper also disusses the importance of in-process quality control throughout manufacturing towards reducing product variability and improving fuel reliability. (author)

Photovoltaic industry manufacturing technology. Final report

Energy Technology Data Exchange (ETDEWEB)

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Non-linear direct effects of acid rain on leaf photosynthetic rate of terrestrial plants.

Science.gov (United States)

Dong, Dan; Du, Enzai; Sun, Zhengzhong; Zeng, Xuetong; de Vries, Wim

2017-12-01

Anthropogenic emissions of acid precursors have enhanced global occurrence of acid rain, especially in East Asia. Acid rain directly suppresses leaf function by eroding surface waxes and cuticle and leaching base cations from mesophyll cells, while the simultaneous foliar uptake of nitrates in rainwater may directly benefit leaf photosynthesis and plant growth, suggesting a non-linear direct effect of acid rain. By synthesizing data from literature on acid rain exposure experiments, we assessed the direct effects of acid rain on leaf photosynthesis across 49 terrestrial plants in China. Our results show a non-linear direct effect of acid rain on leaf photosynthetic rate, including a neutral to positive effect above pH 5.0 and a negative effect below that pH level. The acid rain sensitivity of leaf photosynthesis showed no significant difference between herbs and woody species below pH 5.0, but the impacts above that pH level were strongly different, resulting in a significant increase in leaf photosynthetic rate of woody species and an insignificant effect on herbs. Our analysis also indicates a positive effect of the molar ratio of nitric versus sulfuric acid in the acid solution on leaf photosynthetic rate. These findings imply that rainwater acidity and the composition of acids both affect the response of leaf photosynthesis and therefore result in a non-linear direct effect. Copyright © 2017 Elsevier Ltd. All rights reserved.

Physiological response of marigold (calendula officinalis L.) plants to gamma radiation, gibberellic acid and kinetin

International Nuclear Information System (INIS)

Noby, M.F.A.

2010-01-01

This study was carried out during the two successive seasons of 2005/2006 and 2006/2007 at the Experimental Field of Plant Research Department, Nuclear Research Center, Atomic Energy Authority at Inshas in a newly reclaimed sandy loam soil. The aim of this work was to study the effect of gamma radiation, gibberellic acid or kinetin and their interaction on the growth, flowering and the productivity of pot-marigold (Calendula officinalis L.) plants. The experimental trials included two factorial experiments; the first one was to study the effect of gamma radiation and gibberellic acid and the interaction between them on pot-marigold plants. Another experiment was conducted to study the effect of gamma radiation and kinetin and the interaction between them on pot-marigold plants. Pot-marigold seeds were irradiated before sowing with gamma rays at 0, 50, 100, 150 or 200 Gray (Gy) of gamma rays. After planting, plants were sprayed with either gibberellic acid (at the concentrations of 0, 50, 100, 150 or 200 ppm) or kinetin (at the concentrations of 0, 10, 20, 30 or 40 ppm). Generally, gamma rays treatments (50, 100 and 150 Gy) increased plant height, branch number/plant, leaf area, vegetative growth and roots fresh and dry weights of pot-marigold plants. Also, the same gamma doses accelerated flowering and decreased the period from sowing until flowering while increased flower head diameter, flower number/plant and flowers fresh and dry weights per plant and per feddan. In addition, gamma rays (50 - 150 Gy) increased volatile oil yield in flowers, leaf chlorophyll content, carotenoids and beta carotene in flowers, total soluble sugars and NPK %. The best values were obtained by 50 Gy dose of gamma rays, whereas the dose of 200 Gy gave the lowest values.

Abscisic Acid and Abiotic Stress Tolerance in Crop Plants

Science.gov (United States)

Sah, Saroj K.; Reddy, Kambham R.; Li, Jiaxu

2016-01-01

Abiotic stress is a primary threat to fulfill the demand of agricultural production to feed the world in coming decades. Plants reduce growth and development process during stress conditions, which ultimately affect the yield. In stress conditions, plants develop various stress mechanism to face the magnitude of stress challenges, although that is not enough to protect them. Therefore, many strategies have been used to produce abiotic stress tolerance crop plants, among them, abscisic acid (ABA) phytohormone engineering could be one of the methods of choice. ABA is an isoprenoid phytohormone, which regulates various physiological processes ranging from stomatal opening to protein storage and provides adaptation to many stresses like drought, salt, and cold stresses. ABA is also called an important messenger that acts as the signaling mediator for regulating the adaptive response of plants to different environmental stress conditions. In this review, we will discuss the role of ABA in response to abiotic stress at the molecular level and ABA signaling. The review also deals with the effect of ABA in respect to gene expression. PMID:27200044

Protective Effect of Humic acid and Chitosan on Radish (Raphanus sativus, L. var. sativus Plants Subjected to Cadmium Stress

Directory of Open Access Journals (Sweden)

A.M. EL-Gahmery

2011-05-01

Full Text Available BackgroundHumic acid or chitosan has been shown to increase plant growth, yield and improving physiological processes in plant, but its roles on alleviating the harmful effect of cadmium on plant growth and some physiological processes in plants is very rare. Pot experiments were conducted to study the role of 100 and 200 mg/kg dry soil from either humic acid or chitosan on counteracted the harmful effects of cadmium levels (100 and 150 mg/kg dry soil on radish plant growth and some physiological charactersResultsCadmium at 100 and 150 mg kg-1 soil decreased significantly length, fresh and dry weights of shoot and root systems as well as leaf number per plant in both seasons. Chlorophyll, total sugars, nitrogen, phosphorus, potassium, relative water content, water deficit percentage and soluble proteins as well as total amino acids contents were also decreased. Meanwhile, cadmium concentration in plants was increased. On the other hand, application of chitosan or humic acid as soil addition at the concentration of 100 or 200 mg kg-1 increased all the above mentioned parameters and decreased cadmium concentrations in plant tissues. Chitosan at 200 mg kg-1 was the most effective than humic acid at both concentrations in counteracting the harmful effect of cadmium stress on radish plant growth.ConclusionIn conclusion, both natural chelators, in particular, chitosan at 200 mg/kg dry soil can increase the capacity of radish plant to survive under cadmium stress due to chelating the Cd in the soil, and then reduced Cd bio-availability.

Environmental impacts of manufactured gas plant demolition: examples from site remediation experience

Energy Technology Data Exchange (ETDEWEB)

Unites, D. [Atlantic Environmental Services, Inc., Colchester, CT (United States)

1995-12-31

Inappropriate demolition of manufactured gas plant (MGP) sites may leave a continuing legacy in the environmental record. Much of the contamination encountered at former gas plants originated from on-site disposal or from spills and leaks during operations. However, some of the greatest potential for continual release comes from inappropriately decommissioned vessels and tanks. These structures contained liquids such as tars, oils, water, and other fluids associated with by-product removal or the gas stream purification process. Inorganic `solids` constitute another, although generally minor, source of contaminants during demolition. These contaminants include: cyanide- and sulfide-containing purifier materials; asbestos from roofing, pipe lagging, etc.; mercury from controls and manometers; and lead from painted surfaces. Normal elements of decommissioning and dismantling include: purging the piping system with inert gas; removal and sale of liquids having commercial value; disposal or abandonment of non-saleable liquids; scrapping and dismantling of above-grade metal vessels; abandonment of below-grade vessels; and demolition of above-grade buildings. Depending on the time from the cessation of operations to the demolition, some steps may have been omitted. Appropriate demolition would also take into account removal and disposal of asbestos, cyanide, lead, and mercury-containing materials prior to razing structures. By employing precautions during demolition, widespread contamination can be avoided and subsequent reuse of the site can be facilitated.

Steam turbine chemistry in light water reactor plants

International Nuclear Information System (INIS)

Svoboda, Robert; Haertel, Klaus

2008-01-01

Steam turbines in boiling water reactor (BWR) and pressurized water reactor (PWR) power plants of various manufacturers have been affected by corrosion fatigue and stress corrosion cracking. Steam chemistry has not been a prime focus for related research because the water in nuclear steam generating systems is considered to be of high purity. Steam turbine chemistry however addresses more the problems encountered in fossil fired power plants on all volatile treatment, where corrosive environments can be formed in zones where wet steam is re-evaporated and dries out, or in the phase transition zone, where superheated steam starts to condense in the low-pressure (LP) turbine. In BWR plants the situation is aggravated by the fact that no alkalizing agents are used in the cycle, thus making any anionic impurity immediately acidic. This is illustrated by case studies of pitting corrosion of a 12 % Cr steel gland seal and of flow-oriented corrosion attack on LP turbine blades in the phase transition zone. In PWR plants, volatile alkalizing agents are used that provide some buffering of acidic impurities, but they also produce anionic decomposition products. (orig.)

Reverse osmosis for the recovery of boric acid from the primary coolant at nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Bártová, Šárka, E-mail: sarka.bartova@cvrez.cz [Research Centre Řež Ltd., Husinec-Řež 130, 250 68 Řež (Czech Republic); Kůs, Pavel [Research Centre Řež Ltd., Husinec-Řež 130, 250 68 Řež (Czech Republic); Skala, Martin [Research Centre Řež Ltd., Husinec-Řež 130, 250 68 Řež (Czech Republic); University of Chemical Technology, Prague, Department of Chemical Engineering, Technická 5, Prague 166 28 (Czech Republic); Vonková, Kateřina [Research Centre Řež Ltd., Husinec-Řež 130, 250 68 Řež (Czech Republic)

2016-04-15

Highlights: • RO membranes tested for boric acid recovery from primary coolant of nuclear power plants. • Scanning electron microscopy was used for the characterization of the membranes. • Lab scale experiments performed under various operation conditions. • We proposed configuration of and operation conditions for RO unit in nuclear power plant. - Abstract: At nuclear power plants (NPP), evaporators are used for the treatment of primary coolant and other liquid radioactive waste containing H{sub 3}BO{sub 3}. Because the operation of evaporators is expensive, a number of more cost-effective alternatives has been considered, one of which is reverse osmosis. We tested reverse osmosis modules from several manufactures on a batch laboratory apparatus. SEM images of the tested membranes were taken to distinguish the differences between the membranes. Water permeability through membranes was evaluated from the experiments with pure water. The experiments were performed with feed solutions containing various concentrations of H{sub 3}BO{sub 3} in a range commonly occurring in radioactive waste. The pH of the feed solutions ranged from 5.2 to 11.2. Our results confirmed that the pH of the feed solution plays the most important role in membrane separation efficiency of H{sub 3}BO{sub 3}. Certain modifications to the pH of the feed solution were needed to enable the tested membranes to concentrate the H{sub 3}BO{sub 3} in the retentate stream, separate from the pure water in the permeate stream. On this basis, we propose the configuration of and operational conditions for a reverse osmosis unit at NPP.

Technological and economic potential of poly(lactic acid) and lactic acid derivatives

Energy Technology Data Exchange (ETDEWEB)

Datta, R.; Tsai, S.P.; Bonsignore, P.; Moon, S.H.; Frank, J.R.

1993-10-01

Lactic acid has been an intermediate-volume specialty chemical (world production {approximately}40,000 tons/yr) used in a wide range of food processing and industrial applications. lactic acid h,as the potential of becoming a very large volume, commodity-chemical intermediate produced from renewable carbohydrates for use as feedstocks for biodegradable polymers, oxygenated chemicals, plant growth regulators, environmentally friendly ``green`` solvents, and specially chemical intermediates. In the past, efficient and economical technologies for the recovery and purification of lactic acid from crude fermentation broths and the conversion of tactic acid to the chemical or polymer intermediates had been the key technology impediments and main process cost centers. The development and deployment of novel separations technologies, such as electrodialysis (ED) with bipolar membranes, extractive distillations integrated with fermentation, and chemical conversion, can enable low-cost production with continuous processes in large-scale operations. The use of bipolar ED can virtually eliminate the salt or gypsum waste produced in the current lactic acid processes. In this paper, the recent technical advances in tactic and polylactic acid processes are discussed. The economic potential and manufacturing cost estimates of several products and process options are presented. The technical accomplishments at Argonne National Laboratory (ANL) and the future directions of this program at ANL are discussed.

Effect of Humic Acid and Organic Manure Tea on Plant Physiology and Fruit Characteristics of Pepino

Directory of Open Access Journals (Sweden)

Jamal Javanmardi

2017-02-01

Full Text Available Introduction Pepino (SolanummuricatumAit., a Solanaceous vegetable fruit has been recently introduced to Iran markets. Organic farming is currently the fastest growing agricultural sector worldwide. Although several investigations are available on chemical fertilization of pepino, the knowledge of organic fertilization ismostly lacking. Therefore, at the beginning of introducing pepino plant to Iranian farmers it worth to evaluate the impact of organic fertilization on the productivity, profitability, acceptability and sustainability of farming systemsto this plant. High chemical fertilization of pepinoincreases the vegetative growth over the generative and fruit production. The aim of this investigation was to introduce the possibility of organic production of pepino. Materials and Methods.A two-year experiment was carried out to assess the possibility of organic production of pepino using organic fertilizers. Humistar® organic fertilizer (containing 8.6% humic acid at 50 L/ha and sheep or cow manure teas at 1:10 and 1:5 ratios were used for production of pepino cv. Kanseola to evaluate their effects on the physiology of reproductive stage and some fruit quality characteristics. The experiments were arranged as factorial in a randomized complete block design comprised of 3 replications, each of which 10 plants. Mother plants were obtained from Mashhad Ferdowsi University and incubated in a greenhouse (mean temperature of 25 °C and 60-70% relative humidity for 1 month to proliferate. Cuttings with 2-3 leaves at the top, 3-5 healthy buds and 20 cm length were rooted for 14 days in a rooting media, ( 1:1:2 of field soil, composted leaf and perlite, respectively. Plants were transplanted into the field in 100 × 75 cm spacing after the danger of frost was over. Treatments consisted of two levels of 1:5 and 1:10 (w:w cow or sheep manure teas in combination with two levels of Humistar® organic fertilizer as 0 and 50L/ha levels. Control plants

Benz(a)pyrene levels in medicinal plants and the possibility of contamination of drugs of plant origin

Energy Technology Data Exchange (ETDEWEB)

Kalinina, I A; Dikun, P P

1983-01-01

Benz(a)pyrene (BP) levels in extracts and solvent cake obtained by alcoholic and aqueous extraction of specimens of 20 different medicinal plants were measured to explore into the possibility of its passage from these plants to drugs. Seventy percent alcoholic extracts were found to contain 40-60% of BP passed from raw material, while aqueous extracts--2-3% (in some cases 10-14%). Maximal concentrations of BP in alcoholic extracts were 0.6-0.7 micrograms/1 and 0.03-0.04 micrograms/1--in aqueous ones. A significant correlation between BP level in extracts and its content in plants was established. BP pathways in the course of solasodine manufacturing from nightshade (Solanum lacinatum) were studied. As little as 1% of BP passed to extract after primary extraction in 2%--sulfuric acid. Solasodine contained about 3 micrograms/kg of BP.

Compressed Air System Enhancement Increases Efficiency and Provides Energy Savings at a Circuit Board Manufacturer (Sanmina Plant, Oswego, New York): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

International Nuclear Information System (INIS)

Wogsland, J.

2001-01-01

This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the circuit board manufacturer (Sanmina Plant) project

Crambe tataria sebeók seeds and plants grown in vitro and in vivo fatty acid composition comparison

Directory of Open Access Journals (Sweden)

Nadia Oleksandrivna Pushkarova

2016-10-01

Full Text Available Methods of in vitro conservation offer a number of advantages for endangered species preservation. Crambe tataria Sebeók biochemistry study (fatty acid (FA composition, antioxidant activity (AOA, polyfructan and total soluble protein content is fairly importaint and could show the potential value of this species in agriculture, Food and Chemical Industry or pharmacology including its use as a source of valuble genetic material and could lead to new promising sources of biofuel discovery. Also, comparison of in vitro and in vivo cultured plants could point out to the effect of in vitro culture methods on plants biochemical composition Fatty acid (FA content was determined using Gas chromatography-mass spectrophotometry (GC/MS of fatty acid ethers. Antioxidant activity was determined using DPPH (2,2-diphenyl-1-picrylhydrazyl radical scavenging method. Total soluble protein content was measured using Bradford method and polyfructan content determination was based upon ketosugars ability to color in the acidic environment with resorcinol. Plants that were grown under in vitro and in vivo conditions and seeds were used in this research. Obtained data showed that C. tataria plants had high AOA and total soluble protein content along with high total FA content along with high content of α-Linolenic acid and absence of erucic acid. Difference in biochemical composition between plants grown in aseptic and not aseptic conditions was shown. 

Worker Flows and Job Flows in Danish Manufacturing 1980-91

DEFF Research Database (Denmark)

Albæk, Karsten; Sørensen, B.

1998-01-01

We map turnover of workers and jobs in Danish manufacturing over the 1980 to 1991 period, using information about all individual manufacturing plants. We examine the relation between worker flows and job flows and we study separations from and hires to existing jobs ('replacement hiring') in detail....... Our results reveal large heterogeneity among workers as well as plants, even adjusting for the level of job flows. The cyclical properties of worker reallocation point to worker flow dynamics being driven by workers quitting in upturns to find better jobs, rather than by plants upgrading the labour...

On-line analysis of ETA and organic acids in secondary systems of PWR plants

International Nuclear Information System (INIS)

Kurashina, Masahiko; Uzawa, Hideo; Utagawa, Koya; Takaku, Hiroshi

2005-01-01

To reduce the iron concentration in the secondary water of plants with pressurized water reactors (PWRs), ethanolamine (ETA) is used as an alkalizing agent in the secondary cycle. An on-line ion chromatography (IC) monitoring system for monitoring concentrations of ETA and anions of organic acids was developed, its performance was evaluated, and verification tests were conducted at an actual PWR plant. It was demonstrated that the concentration of both ETA and anions of organic acids may be successfully monitored by IC in PWR secondary cycle streams alkalized by ETA. (orig.)

Molecular, cellular, and physiological responses to phosphatidic acid formation in plants

NARCIS (Netherlands)

Testerink, C.; Munnik, T.

2011-01-01

Phosphatidic acid (PA) is an essential phospholipid involved in membrane biosynthesis and signal transduction in all eukaryotes. This review focuses on its role as lipid second messenger during plant stress, metabolism, and development. The contribution of different individual isoforms of enzymes

Ferulic acid: an antioxidant found naturally in plant cell walls and feruloyl esterases involved in its release and their applications.

Science.gov (United States)

Mathew, Sindhu; Abraham, T Emilia

2004-01-01

Ferulic acid is the most abundant hydroxycinnamic acid in the plant world and maize bran with 3.1% (w/w) ferulic acid is one of the most promising sources of this antioxidant. The dehydrodimers of ferulic acid are important structural components in the plant cell wall and serve to enhance its rigidity and strength. Feruloyl esterases are a subclass of the carboxylic acid esterases that hydrolyze the ester bond between hydroxycinnamic acids and sugars present in plant cell walls and they have been isolated from a wide range of microorganisms, when grown on complex substrates such as cereal brans, sugar beet pulp, pectin and xylan. These enzymes perform a function similar to alkali in the deesterification of plant cell wall and differ in their specificities towards the methyl esters of cinnamic acids and ferulolylated oligosaccharides. They act synergistically with xylanases and pectinases and facilitate the access of hydrolases to the backbone of cell wall polymers. The applications of ferulic acid and feruloyl esterase enzymes are many and varied. Ferulic acid obtained from agricultural byproducts is a potential precursor for the production of natural vanillin, due to the lower production cost.

Citric acid enhances the phytoextraction of manganese and plant growth by alleviating the ultrastructural damages in Juncus effusus L

Energy Technology Data Exchange (ETDEWEB)

Najeeb, U.; Xu, L.; Ali, Shafaqat [Institute of Crop Science, College of Agriculture and Biotechnology, Zhejiang University, Hangzhou 310029 (China); Jilani, Ghulam, E-mail: jilani@uaar.edu.pk [Department of Soil Science, Pir Mehr Ali Shah Arid Agriculture University, Rawalpindi, Punjab 46300 (Pakistan); Gong, H.J. [Institute of Crop Science, College of Agriculture and Biotechnology, Zhejiang University, Hangzhou 310029 (China); Shen, W.Q. [The University of Nottingham at Ningbo, Ningbo 315100 (China); Zhou, W.J., E-mail: wjzhou@zju.edu.cn [Institute of Crop Science, College of Agriculture and Biotechnology, Zhejiang University, Hangzhou 310029 (China)

2009-10-30

Chelate-assisted phytoextraction by high biomass producing plant species enhances the removal of heavy metals from polluted environments. In this regard, Juncus effusus a wetland plant has great potential. This study evaluated the effects of elevated levels of manganese (Mn) on the vegetative growth, Mn uptake and antioxidant enzymes in J. effusus. We also studied the role of citric acid and EDTA on improving metal accumulation, plant growth and Mn toxicity stress alleviation. Three-week-old plantlets of J. effusus were subjected to various treatments in the hydroponics as: Mn (50, 100 and 500 {mu}M) alone, Mn (500 {mu}M) + citric acid (5 mM), and Mn (500 {mu}M) + EDTA (5 mM). After 2 weeks of treatment, higher Mn concentrations significantly reduced the plant biomass and height. Both citric acid and EDTA restored the plant height as it was reduced at the highest Mn level. Only the citric acid (but not EDTA) was able to recover the plant biomass weight, which was also obvious from the microscopic visualization of mesophyll cells. There was a concentration dependent increase in Mn uptake in J. effusus plants, and relatively more deposition in roots compared to aerial parts. Although both EDTA and citric acid caused significant increase in Mn accumulation; however, the Mn translocation was enhanced markedly by EDTA. Elevated levels of Mn augmented the oxidative stress, which was evident from changes in the activities of antioxidative enzymes in plant shoots. Raised levels of lipid peroxidation and variable changes in the activities of antioxidant enzymes were recorded under Mn stress. Electron microscopic images revealed several modifications in the plants at cellular and sub-cellular level due to the oxidative damage induced by Mn. Changes in cell shape and size, chloroplast swelling, increased number of plastoglobuli and disruption of thylakoid were noticed. However, these plants showed a high degree of tolerance against Mn toxicity stress, and it removed

Citric acid enhances the phytoextraction of manganese and plant growth by alleviating the ultrastructural damages in Juncus effusus L

International Nuclear Information System (INIS)

Najeeb, U.; Xu, L.; Ali, Shafaqat; Jilani, Ghulam; Gong, H.J.; Shen, W.Q.; Zhou, W.J.

2009-01-01

Chelate-assisted phytoextraction by high biomass producing plant species enhances the removal of heavy metals from polluted environments. In this regard, Juncus effusus a wetland plant has great potential. This study evaluated the effects of elevated levels of manganese (Mn) on the vegetative growth, Mn uptake and antioxidant enzymes in J. effusus. We also studied the role of citric acid and EDTA on improving metal accumulation, plant growth and Mn toxicity stress alleviation. Three-week-old plantlets of J. effusus were subjected to various treatments in the hydroponics as: Mn (50, 100 and 500 μM) alone, Mn (500 μM) + citric acid (5 mM), and Mn (500 μM) + EDTA (5 mM). After 2 weeks of treatment, higher Mn concentrations significantly reduced the plant biomass and height. Both citric acid and EDTA restored the plant height as it was reduced at the highest Mn level. Only the citric acid (but not EDTA) was able to recover the plant biomass weight, which was also obvious from the microscopic visualization of mesophyll cells. There was a concentration dependent increase in Mn uptake in J. effusus plants, and relatively more deposition in roots compared to aerial parts. Although both EDTA and citric acid caused significant increase in Mn accumulation; however, the Mn translocation was enhanced markedly by EDTA. Elevated levels of Mn augmented the oxidative stress, which was evident from changes in the activities of antioxidative enzymes in plant shoots. Raised levels of lipid peroxidation and variable changes in the activities of antioxidant enzymes were recorded under Mn stress. Electron microscopic images revealed several modifications in the plants at cellular and sub-cellular level due to the oxidative damage induced by Mn. Changes in cell shape and size, chloroplast swelling, increased number of plastoglobuli and disruption of thylakoid were noticed. However, these plants showed a high degree of tolerance against Mn toxicity stress, and it removed substantial

Plant perception of β-aminobutyric acid is mediated by an aspartyl-tRNA synthetase

NARCIS (Netherlands)

Luna, E.; Van Hulten, M.; Zhang, Y.; Berkowitz, O.; López, A.; Pétriacq, P.; Sellwood, M.A.; Chen, B.; Burrell, M.; Van de Meene, A.; Pieterse, C.M.J.; Flors, V.; Ton, J.

2014-01-01

Specific chemicals can prime the plant immune system for augmented defense. β-aminobutyric acid (BABA) is a priming agent that provides broad-spectrum disease protection. However, BABA also suppresses plant growth when applied in high doses, which has hampered its application as a crop defense

Plant perception of β-aminobutyric acid is mediated by an aspartyl-tRNA synthetase

NARCIS (Netherlands)

Luna, Estrella; van Hulten, Marieke; Zhang, Yuhua; Berkowitz, Oliver; López, Ana; Pétriacq, Pierre; Sellwood, Matthew A; Chen, Beining; Burrell, Mike; van de Meene, Allison; Pieterse, Corné M J; Flors, Victor; Ton, Jurriaan

Specific chemicals can prime the plant immune system for augmented defense. β-aminobutyric acid (BABA) is a priming agent that provides broad-spectrum disease protection. However, BABA also suppresses plant growth when applied in high doses, which has hampered its application as a crop defense

Different Lactobacillus populations dominate in "Chorizo de León" manufacturing performed in different production plants.

Science.gov (United States)

Quijada, Narciso M; De Filippis, Francesca; Sanz, José Javier; García-Fernández, María Del Camino; Rodríguez-Lázaro, David; Ercolini, Danilo; Hernández, Marta

2018-04-01

"Chorizo de Léon" is a high-value Spanish dry fermented sausage traditionally manufactured without the use of starter cultures, owing to the activity of a house-specific autochthonous microbiota that naturally contaminates the meat from the environment, the equipment and the raw materials. Lactic acid bacteria (particularly Lactobacillus) and coagulase-negative cocci (mainly Staphylococcus) have been reported as the most important bacterial groups regarding the organoleptic and safety properties of the dry fermented sausages. In this study, samples from raw minced meat to final products were taken from five different producers and the microbial diversity was investigated by high-throughput sequencing of 16S rRNA gene amplicons. The diverse microbial composition observed during the first stages of "Chorizo de Léon" evolved during ripening to a microbiota mainly composed by Lactobacillus in the final product. Oligotyping performed on 16S rRNA gene sequences of Lactobacillus and Staphylococcus populations revealed sub-genus level diversity within the different manufacturers, likely responsible of the characteristic organoleptic properties of the products from different companies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Inhibitive action of some plant extracts on the corrosion of steel in acidic media

Energy Technology Data Exchange (ETDEWEB)

Abdel-Gaber, A.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)]. E-mail: ashrafmoustafa@yahoo.com; Abd-El-Nabey, B.A. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); Sidahmed, I.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); El-Zayady, A.M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt); Saadawy, M. [Department of Chemistry, Faculty of Science, Alexandria University, Ibrahimia, P.O. Box 426, Alexandria 21321 (Egypt)

2006-09-15

The effect of extracts of Chamomile (Chamaemelum mixtum L.), Halfabar (Cymbopogon proximus), Black cumin (Nigella sativa L.), and Kidney bean (Phaseolus vulgaris L.) plants on the corrosion of steel in aqueous 1 M sulphuric acid were investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. EIS measurements showed that the dissolution process of steel occurs under activation control. Potentiodynamic polarization curves indicated that the plant extracts behave as mixed-type inhibitors. The corrosion rates of steel and the inhibition efficiencies of the extracts were calculated. The results obtained show that the extract solution of the plant could serve as an effective inhibitor for the corrosion of steel in sulphuric acid media. Inhibition was found to increase with increasing concentration of the plant extract up to a critical concentration. The inhibitive actions of plant extracts are discussed on the basis of adsorption of stable complex at the steel surface. Theoretical fitting of different isotherms, Langmuir, Flory-Huggins, and the kinetic-thermodynamic model, were tested to clarify the nature of adsorption.

Characterisation of acid pollutant emissions in ceramic tile manufacture

Directory of Open Access Journals (Sweden)

Monfort, E.

2011-08-01

Full Text Available One of the environmental impacts associated with ceramics manufacture is the air emission of acid compounds stem from the presence of impurities in the raw materials and/or fuels. The present study was undertaken to identify the significant gaseous pollutants of an acid nature, to determine their concentrations, and to obtain the characteristic emission factors in spray dryers and firing kilns. The results show that, in spray dryers, the emission levels of the different acid pollutants are far below the current emission limit values applied in the European Union (EU. In firing kilns, the most significant acid pollutant emissions, compared with the recommended EU emission limit values (ELV-BAT, correspond to HF and HCl emissions, indicating that these emissions need to be corrected by appropriate cleaning systems before such emissions are released into the air. On the other hand, the results indicate that SO₂ and NO_x emissions in the Castellón industrial ceramic sector lie below the ELV–BAT proposed in the European ceramic industry BREF, owing to the widespread use of natural gas as fuel and of raw materials with reduced sulphur contents.

Uno de los impactos medioambientales asociado a la fabricación de productos cerámicos es la emisión a la atmósfera de compuestos ácidos debido a la presencia de impurezas en las materias primas y/o combustibles. Los objetivos del presente estudio son: identificar los contaminantes gaseosos de naturaleza ácida significativos, determinar su concentración y obtener factores de emisión de los secaderos por atomización y los hornos de cocción. Los resultados obtenidos, en el caso de los secaderos por atomización, muestran que los niveles de emisión de los diferentes contaminantes ácidos se encuentran alejados de los valores límite de emisiones aplicados actualmente en la Unión Europea (UE. En cuanto a los hornos de cocción, la emisión más significativa de

Interaction of plant cell signaling molecules, salicylic acid and jasmonic acid, with the mitochondria of Helicoverpa armigera.

Science.gov (United States)

Akbar, S M D; Sharma, H C; Jayalakshmi, S K; Sreeramulu, K

2012-02-01

The cotton bollworm, Helicoverpa armigera is a polyphagous pest in Asia, Africa, and the Mediterranean Europe. Salicylic acid (SA) and jasmonic acid (JA) are the cell signaling molecules produced in response to insect attack in plants. The effect of these signaling molecules was investigated on the oxidative phosphorylation and oxidative stress of H. armigera. SA significantly inhibited the state III and state IV respiration, respiratory control index (RCI), respiratory complexes I and II, induced mitochondrial swelling, and cytochrome c release in vitro. Under in vivo conditions, SA induced state IV respiration as well as oxidative stress in time- and dose-dependent manner, and also inhibited the larval growth. In contrast, JA did not affect the mitochondrial respiration and oxidative stress. SA affected the growth and development of H. armigera, in addition to its function as signaling molecules involved in both local defense reactions at feeding sites and the induction of systemic acquired resistance in plants.

How to Do It. Plant Eco-Physiology: Experiments on Crassulacean Acid Metabolism, Using Minimal Equipment.

Science.gov (United States)

Friend, Douglas J. C.

1990-01-01

Features of Crassulacean Acid Metabolism plants are presented. Investigations of a complex eco-physiological plant adaptation to the problems of growth in an arid environment are discussed. Materials and procedures for these investigations are described. (CW)

Assessment of Occupational Health and Safety for a Gas Meter Manufacturing Plant

Science.gov (United States)

Korkmaz, Ece; Iskender, Gulen; Germirli Babuna, Fatos

2016-10-01

This study investigates the occupational health and safety for a gas meter manufacturing plant. The risk assessment and management study is applied to plastic injection and mounting departments of the factory through quantitative Fine Kinney method and the effect of adopting 5S workplace organization procedure on risk assessment is examined. The risk assessment reveals that there are 17 risks involved; 14 grouped in high risk class (immediate improvement as required action); 2 in significant (measures to be taken as required action) and one in possible risk class (monitoring as required action). Among 14 high risks, 4 can be reduced by 83 % to be grouped under possible class when 5S is applied. One significant risk is observed to be lowered by 78 % and considered as possible risk due to the application of 5S. As a result of either 67 or 50 % reductions in 7 high risks, these risks are converted to be members of significant risk group after 5S implications.

Manufacturing opportunities in the Canadian CANDU and heavy water programs

International Nuclear Information System (INIS)

Reny, J.P.

The volume of business available to Canadian manufacturers of CANDU power plant and heavy water plant components is analyzed over about the next 10 years. Implications of exported nuclear technology and plants are explored. (E.C.B.)

Gluconic acid production and phosphate solubilization by the plant growth-promoting bacterium Azospirillum spp.

Science.gov (United States)

Rodriguez, Hilda; Gonzalez, Tania; Goire, Isabel; Bashan, Yoav

2004-11-01

In vitro gluconic acid formation and phosphate solubilization from sparingly soluble phosphorus sources by two strains of the plant growth-promoting bacteria A. brasilense (Cd and 8-I) and one strain of A. lipoferum JA4 were studied. Strains of A. brasilense were capable of producing gluconic acid when grown in sparingly soluble calcium phosphate medium when their usual fructose carbon source is amended with glucose. At the same time, there is a reduction in pH of the medium and release of soluble phosphate. To a greater extent, gluconic acid production and pH reduction were observed for A. lipoferum JA4. For the three strains, clearing halos were detected on solid medium plates with calcium phosphate. This is the first report of in vitro gluconic acid production and direct phosphate solubilization by A. brasilense and the first report of P solubilization by A. lipoferum. This adds to the very broad spectrum of plant growth-promoting abilities of this genus.

Induction of resistance of corn plants to Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera: Noctuidae) by application of silicon and gibberellic acid.

Science.gov (United States)

Alvarenga, R; Moraes, J C; Auad, A M; Coelho, M; Nascimento, A M

2017-08-01

The aim of this study was to evaluate the effects of silicon application and administration of the phytohormone gibberellic acid on resistance of the corn plants to the fall armyworm (FAW), Spodoptera frugiperda, and their vegetative characteristics. We evaluated larval and pupal duration, survival and biomass, and adult longevity, malformation and fecundity of S. frugiperda after feeding on plant matter treated with silicon and/or gibberellic acid. The feeding preference of FAW first-instar larvae, the total leaf area consumed by the insects, and the vegetative parameters of corn plants were also evaluated. No significant differences were observed in the measured parameters of larval and pupal stages of S. frugiperda in response to silicon or gibberellic acid. In adult stage insects, the number of eggs per female was significantly reduced in insects derived from larvae fed plants treated with silicon or gibberellic acid. In a non-preference test, 48 h after release, caterpillars preferred control untreated plants and consumed less matter from plants that had received hormonal treatment (gibberellic acid). Gibberellic acid also altered the vegetative characteristics of plants, by increasing their height, shoot fresh and dry mass, and silicon content. We conclude that gibberellic acid can alter the vegetative characteristics and silicon uptake of corn plants, leading to a reduction in their consumption by S. frugiperda larvae and a decrease in female insect oviposition.

Experience in the manufacture of nuclear equipment in India

International Nuclear Information System (INIS)

Challappa, S.; Murthy, G.S.K.; Mehta, S.K.; Kakodkar, A.; Natarajan, A.

1977-01-01

Department of Atomic Energy with its programme for achieving self-sufficiency was involved in engineering, manufacture, inspection, performance testing and quality surveillance of major precision and critical equipment such as reactor vessels, shields, fuelling machines, coolant channel components etc. etc. high pressure equipment for Heavy Water Plants, specialized components for Fuel Complex, major equipment for Cyclotron Project and various research projects. These had to be manufactured at various shops in the country depending upon the availability of machines. The relative importance of various important parameters associated with the manufacture of this equipment were assessed in a separate R and D programme. This has helped in re-designing in some areas to suit the manufacture under Indian conditions. Assessment of any marginal variations that take place during manufacture was also possible because of the availability of data of this kind. Critical components and equipment are tested for their performance under simulated conditions before shipments. B.A.R.C. has contributed immensely in achieving the self-sufficiency and also for designs for future plants

The effectiveness of manufacturing practices in different subsidiary types – consequences for CEE subsidiaries

DEFF Research Database (Denmark)

Demeter, Krisztina; Szász, Levente; Boer, Harry

In the last decades several companies have become manufacturing networks of plants, operating usually in an international context. These plants can serve different purposes and have different levels of competences. This diversity influences the use and effectiveness of different manufacturing...

1000kW phosphoric acid fuel cell power plant. Outline of the plant

Energy Technology Data Exchange (ETDEWEB)

Shinobe, Kenji; Suzuki, Kazuo; Kaneko, Hideo

1988-02-10

The outline of the 1000KW phosphoric acid fuel cell power plant, developed as part of the Moonlight plan, was described. The plant was composed of 4 stacks of 260KW DC output. They were devided into two train with 680V and 765A. The generation efficiency of the plant was 40% and more. Steam reforming of natural gas was used. As the fuel, fuel cell exhaust gas was used in composition with the natural gas. The DC-AC inverter had an efficiency of 96%. The capacity of hot water generator and demineralized water plant for cell cooling were 2t/h and 1.6t/h, respectively, and air-system was incorporated. In September of 1987, the plant has succeeded in 1000KW power generation, and put in operation now. Under the 100% loaded condition, each cell had a voltage of 0.7V with little variation, and the current was 200mA/cm/sup 2/. No problems were found in cooling conditions and in the control of interpole differential pressure. The reformer has been operated for 1200h scince its commisioning, and had experiences of 100 times on start up-shut down operations, the reformer also indicated good performances in the gas compositions. The starting time of 8h and the load follow-up rate 10%/min remain as the subjects for shortening. DC-AC conversion was good. The concentration of NOx and the noise level satisfied the target values. (12 figs, 1 tab)

Experience in small hydropower indigenous manufacture of mini hydraulic turbines

Energy Technology Data Exchange (ETDEWEB)

Luo Gao Rong [Organization of the United Nations, Beijing (China). International Centre of Small Hydropowers

1995-07-01

This document reports the China experience with fabrication of mini hydraulic turbines for small hydroelectric power plants. The document presents the necessity of indigenous manufacture for MHP equipment, the standardized and serialized production, the planning of the series of turbines, the manufacturing of turbine runners, and as a case study the basic conditions for manufacturing MHP turbines.

Analytical characterization of contaminated soils from former manufactured gas plants

International Nuclear Information System (INIS)

Haeseler, F.; Blanchet, D.; Vandecasteele, J.P.; Druelle, V.; Werner, P.; Technische Univ., Dresden,

1999-01-01

Detailed analytical characterization of the organic matter (OM) of aged polluted soils from five former manufactured gas plants (MGP) and of two coal tars was completed. It was aimed at obtaining information relevant to the physicochemical state of the polycyclic aromatic hydrocarbon (PAH) pollutants and to their in-situ evolution in time. Overall characterization of total OM (essentially polluting OM) was carried out directly on soil samples with or without prior extraction with solvent. It involved a technique of pyrolysis/oxidation coupled to flame ionization/thermal conductivity detection. Extracts in solvent were fractionated by liquid chromatography into saturated hydrocarbons, PAH, and resins, the first two fractions being further characterized by gas chromatography and mass spectrometry. The compositions of OM of soils were found to be very similar. A total of 28% of organic carbon, including all PAH, was extractable by solvent. The compositions of coal tars were qualitatively similar to those of OM of MGP soils but with a higher proportion (48%) of total extractable OM and of PAH, in particular lower PAH. Contamination of MGP soils appeared essentially as coal tar having undergone natural attenuation. The constant association of PAH with heavy OM in MGP soils is important with respect to the mobility and bioaccessibility of these pollutants

The epidemiology of slips, trips, and falls in a helicopter manufacturing plant.

Science.gov (United States)

Amandus, Harlan; Bell, Jennifer; Tiesman, Hope; Biddle, Elyce

2012-06-01

The purpose of this evaluation was to evaluate the causes and costs of slips, trips, and falls (STFs) in a helicopter manufacturing plant. STFs are a significant portion of the total industry injury burden. For this study, 4,070 helicopter plant workers who were employed from January 1, 2004, through February 28, 2008, were enrolled. Company records on workers' compensation claims, occupational health first report of injury, and payroll records on hours worked were collected. Cause and source of all injuries, including STFs, were coded for analysis. During the 4-year study period, there were 2,378 injuries and 226 STFs (46 falls [20%] to a lower level, 117 [52%] falls on the same level, 41 [18%] from loss of balance without a fall, and 22 [10%] from other events). Of the 226 STFs, 123 falls to the same level were caused by slippery substances (52), objects on floor (43), and surface hazards (28), and they cost $1,543,946. Falls to lower levels primarily involved access to stands to and from aircraft and falling off large machines. More than half of the STF injury claims likely could have been prevented by housekeeping and maintenance, and this cost saving could reasonably offset a considerable portion of the cost of prevention. Training and stand modifications could be considered to prevent falls from elevation from stands, machines, and aircraft. Recommendations for STF prevention are discussed.

INTEGRATED AUTOMOTIVE MANUFACTURING SUPPLY

Directory of Open Access Journals (Sweden)

P.J.S. Van Dyk

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Supply planning and traffic flow planning are major activities in the automotive manufacturing environment worldwide. Traditionally, the impact of supply planning strategies on plant traffic is rarely considered. This paper describes the development of a Decision Support System (DSS that will assist automotive manufacturers to analyse the effect of supply planning decisions on plant traffic during the supply planning phase of their logistics planning process. In essence, this DSS consists of a Supply Medium Decision Support Tool (SMDST (an interactive MS-Excel model with Visual Basic interfacing and a traffic flow simulation model tool (using eMPlant simulation software.

AFRIKAANSE OPSOMMING: Verskaffingsbeplanning en verkeersvloeibeplanning is belangrike aktiwiteite in die motorvervaardigingsbedryf wêreldwyd. Tradisioneel word die uitwerking van verskaffings-beplanningsstrategië op aanlegverkeer selde in ag geneem. Hierdie artikel beskryf die ontwikkeling van ’n Besluitnemings Ondersteuningstelsel (DSS wat motorvervaardigers sal ondersteun in die analise van die effek van verskaffingsbeplanningbesluite op aanlegverkeer tydens die verskaffingsbeplanningsfase van hulle logistieke beplanningsproses. Hierdie DSS bestaan hoofsaaklik uit ’n Verskaffings-vervoermiddel Besluitnemingshulpmiddel (SMDST (’n interaktiewe MS-Excel model met “Visual Basic” koppelling asook ’n simulasiemodel van verkeersvloei (met eM-Plant simulasiesagteware.

QUALITATIVE COMPOSITION AND ORGANI C ACIDS CONTENT IN THE ABOVEGROUN D PART OF PLANTS FRO M FAMILIES LAMIACEAE, ASTERACEAE, APIACEAE AND CHENOPODIACEAE

Directory of Open Access Journals (Sweden)

S. M. Marchyshyn

2016-05-01

Full Text Available Background. Organic acids are the compounds of aliphatic or aromatic orders, which are widespread in flora and have a wide range of biological activity. We studied the qualitative composition and quantitative contents of organic acids in the aboveground part of some unofficial medicinal plants from families Lamiaceae, Asteraceae, Apiaceae and Chenopodiaceae is relevant. Objective. The objects of the research are the aboveground part of unofficial medicinal plants from families Lamiaceae, Asteraceae, Apiaceae and Chenopodiaceae. Methods. Identification of organic acids was performed by means of thin-layer and paper chromatography, their content was determined by means of gas chromatography, the quantitative amount of organic acids was defined by titrimetric analysis. Results. In the studied raw plants the quality of organic acids and their total contents were determined (in terms of malic acid. It is established that the maximum content of organic acids is accumulated in the grass Hyssopus officinalis L. (Lamiaceae, and the minimal is in the leaves of Chrysánthemum xhortorum L. variety Apro (Asteraceae. In all studied raw plants the dominance of aliphatic acids (citric, malic, oxalic and malonic was determined by means of gas chromatography. Benzoic is predominant among the aromatic acids. Conclusions. In the studied raw plants the quality of organic acids and their total content were determined. The following results can be used in developing the methods of quality control of the studied raw plants and during the study of new bioactive substances.

Improved Manufacturing Process for Pyronaridine Tetraphosphate

International Nuclear Information System (INIS)

Lee, Dong Won; Lee, Seung Kyu; Cho, Jun Ho; Yoon, Seung Soo

2014-01-01

Pyronaridine tetraphosphate (1) is a well-known antimalarial drug. However, it required a carefully optimized production process for the manufacture of pyronaridine tetraphosphate. Each step of its manufacturing process was reinvestigated. For the cyclization of 4-chloro-2-(6-methoxy-pyridin-3-yl-amino)-benzoic acid 6 to 7,10-dichloro-2-methoxybenzo[b]-1,5-naphthyridine 5, an improved process was developed to eliminated critical process impurity (BIA). By the redesign of the formation of triphosphate salt, the purity as API grade was increased. Thus, a robust manufacturing process with an acceptable process performance has been developed to produce high quality pyronaridine tetraphosphate

Computational fluid dynamics (CFD) analysis of the coal combustion in a boiler of a thermal power plant using different kinds of the manufactured coals

Energy Technology Data Exchange (ETDEWEB)

Silva, Cristiano Vitorino da; Lazzari, Luis Carlos; Ziemniczak, Aline; Beskow, Arthur Bortolin [Universidade Regional Integrada do Alto Uruguai e das Missoes (URI), Erechim, RS (Brazil)], E-mails: cristiano@uricer.edu.br, arthur@uricer.edu.br

2010-07-01

The state of the art in computational fluid dynamics and the availability of commercial codes encourage numerical studies of combustion processes. In the present work the commercial software CFX Ansys Europe Ltd. has been used to study the combustion of pulverized coal into the boiler of a thermal power plant. The objective of this work is to obtain new information for process optimization. Different kinds of manufactured coals were numerically tested in a thermal power plant installed at the southeast region of Brazil. The simulations were made using the actual burning conditions of the boiler. Results include the residence time of the fuel into the combustion chamber, temperature fields, flow fluid mechanics, heat transfer and pollutant formation, as well as the CO and NOx concentrations, aiming to determinate the best conditions to burn the investigated coals. The numerical investigation of the phenomena involved on the coal combustion processes are used to complete the experimental information obtained in operational tests. Considering the characteristics of different kinds of manufactured coals used, with this study is possible to achieve the most efficient boiler operation parameters, with decreasing costs of electricity production and reduction of environmentally harmful emissions. It was verified that the different kinds of manufactured coals demand different operation conditions, and the kind of manufactured coal used on the combustion process has a significant effect on the pollutant formation, mainly in rel action with ash concentration. (author)

Uranium manufacturing process employing the electrolytic reduction method

International Nuclear Information System (INIS)

Oda, Yoshio; Kazuhare, Manabu; Morimoto, Takeshi.

1986-01-01

The present invention related to a uranium manufacturing process that employs the electrolytic reduction method, but particularly to a uranium manufacturing process that employs an electrolytic reduction method requiring low voltage. The process, in which uranium is obtained by means of the electrolytic method and with uranyl acid as the raw material, is prior art

Synthesis of Gibberellic Acid Derivatives and Their Effects on Plant Growth

Directory of Open Access Journals (Sweden)

Hao Tian

2017-04-01

Full Text Available A series of novel C-3-OH substituted gibberellin derivatives bearing an amide group were designed and synthesized from the natural product gibberellic acid (GA3. Their activities on the plant growth regulation of rice and Arabidopsis were evaluated in vivo. Among these compounds, 10d and 10f exhibited appreciable inhibitory activities on rice (48.6% at 100 μmol/L and Arabidopsis (41.4% at 100 μmol/L, respectively. These results provide new insights into the design and synthesis of potential plant growth regulators.

Analysis of vitamin C in selected medicinal plants

International Nuclear Information System (INIS)

Hussain, I.

2011-01-01

Vitamin C or ascorbic acid, a very useful constituent of redox mechanism is used in medicine and also added in manufactured food for anti-oxidation. A UV-spectrophotometric method was used for the determination of Vitamin C in 4 different medicinal plants. High amount of Vitamin C 160 mg/100 g was found in Citrulus colcocynthis, followed by Hippophae rhamonides oil 136.1 mg/100g. A relatively low concentration of Vitamin C was recorded in Glycyrhiza glabra 56.2 mg/100g and Withinia somnifera 51.50 mg/100 g. The presence of high concentration of Vitamin C in selected medicinal plants might be responsible for their therapeutic effects and uses in the traditional system of medicine. (author)

Bacteria from wheat and cucurbit plant roots metabolize PAHs and aromatic root exudates: Implications for rhizodegradation.

Science.gov (United States)

Ely, Cairn S; Smets, Barth F

2017-10-03

The chemical interaction between plants and bacteria in the root zone can lead to soil decontamination. Bacteria that degrade polycyclic aromatic hydrocarbons (PAHs) have been isolated from the rhizospheres of plant species with varied biological traits; however, it is not known what phytochemicals promote contaminant degradation. One monocot and two dicotyledon plants were grown in PAH-contaminated soil from a manufactured gas plant (MGP) site. A phytotoxicity assay confirmed greater soil decontamination in rhizospheres when compared to bulk soil controls. Bacteria were isolated from plant roots (rhizobacteria) and selected for growth on anthracene and chrysene on PAH-amended plates. Rhizosphere isolates metabolized 3- and 4-ring PAHs and PAH catabolic intermediates in liquid incubations. Aromatic root exudate compounds, namely flavonoids and simple phenols, were also substrates for isolated rhizobacteria. In particular, the phenolic compounds-morin, caffeic acid, and protocatechuic acid-appear to be linked to bacterial degradation of 3- and 4-ring PAHs in the rhizosphere.

Suppression of jasmonic acid-dependent defense in cotton plant by the mealybug Phenacoccus solenopsis.

Directory of Open Access Journals (Sweden)

Pengjun Zhang

Full Text Available The solenopsis mealybug, Phenacoccus solenopsis, has been recently recognized as an aggressively invasive pest in China, and is now becoming a serious threat to the cotton industry in the country. Thus, it is necessary to investigate the molecular mechanisms employed by cotton for defending against P. solenopsis before the pest populations reach epidemic levels. Here, we examined the effects of exogenous jasmonic acid (JA, salicylic acid (SA, and herbivory treatments on feeding behavior and on development of female P. solenopsis. Further, we compared the volatile emissions of cotton plants upon JA, SA, and herbivory treatments, as well as the time-related changes in gossypol production and defense-related genes. Female adult P. solenopsis were repelled by leaves from JA-treated plant, but were not repelled by leaves from SA-treated plants. In contrast, females were attracted by leaves from plants pre-infested by P. solenopsis. The diverse feeding responses by P. solenopsis were due to the difference in volatile emission of plants from different treatments. Furthermore, we show that JA-treated plants slowed P. solenopsis development, but plants pre-infested by P. solenopsis accelerated its development. We also show that P. solenopsis feeding inhibited the JA-regulated gossypol production, and prevented the induction of JA-related genes. We conclude that P. solenopsis is able to prevent the activation of JA-dependent defenses associated with basal resistance to mealybugs.

Survey on the virtual commissioning of manufacturing systems

Directory of Open Access Journals (Sweden)

Chi G. Lee

2014-07-01

Full Text Available This paper reviews and identifies issues in the application of virtual commissioning technology for automated manufacturing systems. While the real commissioning of a manufacturing system involves a real plant system and a real controller, the virtual commissioning deals with a virtual plant model and a real controller. The expected benefits of virtual commissioning are the reduction of debugging and correction efforts during the subsequent real commissioning stage. However, it requires a virtual plant model and hence still requires significant amount time and efforts. Two main issues are identified, the physical model construction of a virtual device, and the logical model construction of a virtual device. This paper reviews the current literature related to the two issues and proposes future research directions to achieve the full utilization of virtual commissioning technology.

Priming by Hexanoic acid induce activation of mevalonic and linolenic pathways and promotes the emission of plant volatiles.

Directory of Open Access Journals (Sweden)

Eugenio eLlorens

2016-04-01

Full Text Available Hexanoic acid is a short natural monocarboxylic acid present in some fruits and plants. Previous studies reported that soil drench application of this acid induces effective resistance in tomato plants against Botrytis cinerea and Pseudomonas syringae and in citrus against Alternaria alternata and Xanthomonas citri. In this work, we performed an in deep study of the metabolic changes produced in citrus by the application of hexanoic acid in response to the challenge pathogen Alternaria alternata, focusing on the response of the plant. Moreover, we used 13C labeled hexanoic to analyze its behavior inside the plants. Finally, we studied the volatile emission of the treated plants after the challenge inoculation. Drench application of 13C labeled hexanoic demonstrated that this molecule stays in the roots and is not mobilized to the leaves, suggesting long distance induction of resistance. Moreover, the study of the metabolic profile showed an alteration of more than two hundred molecules differentially induced by the application of the compound and the inoculation with the fungus. Bioinformatics analysis of data showed that most of these altered molecules could be related with the mevalonic and linolenic pathways suggesting the implication of these pathways in the induced resistance mediated by hexanoic acid. Finally, the application of this compound showed an enhancement of the emission of 17 volatile metabolites. Taken together, this study indicates that after the application of hexanoic acid this compound remains in the roots, provoking molecular changes that may trigger the defensive response in the rest of the plant mediated by changes in the mevalonic and linolenic pathways and enhancing the emission of volatile compounds, suggesting for the first time the implication of mevalonic pathway in response to hexanoic application.

Manufacturing ceramic bricks with polyaluminum chloride (PAC) sludge from a water treatment plant.

Science.gov (United States)

da Silva, E M; Morita, D M; Lima, A C M; Teixeira, L Girard

2015-01-01

The objective of this research work is to assess the viability of manufacturing ceramic bricks with sludge from a water treatment plant (WTP) for use in real-world applications. Sludge was collected from settling tanks at the Bolonha WTP, which is located in Belém, capital of the state of Pará, Brazil. After dewatering in drainage beds, sludge was added to the clay at a local brickworks at different mass percentages (7.6, 9.0, 11.7, 13.9 and 23.5%). Laboratory tests were performed on the bricks to assess their resistance to compression, water absorption, dimensions and visual aspects. Percentages of 7.6, 9.0, 11.7 and 13.9% (w/w) of WTP sludge presented good results in terms of resistance, which indicates that technically, ceramic bricks can be produced by incorporating up to 13.9% of WTP sludge.

Exploitation of vegetables and fruits through lactic acid fermentation.

Science.gov (United States)

Di Cagno, Raffaella; Coda, Rossana; De Angelis, Maria; Gobbetti, Marco

2013-02-01

Lactic acid fermentation represents the easiest and the most suitable way for increasing the daily consumption of fresh-like vegetables and fruits. Literature data are accumulating, and this review aims at describing the main features of the lactic acid bacteria to be used for fermentation. Lactic acid bacteria are a small part of the autochthonous microbiota of vegetables and fruits. The diversity of the microbiota markedly depends on the intrinsic and extrinsic parameters of the plant matrix. Notwithstanding the reliable value of the spontaneous fermentation to stabilize and preserve raw vegetables and fruits, a number of factors are in favour of using selected starters. Two main options may be pursued for the controlled lactic acid fermentation of vegetables and fruits: the use of commercial/allochthonous and the use of autochthonous starters. Several evidences were described in favour of the use of selected autochthonous starters, which are tailored for the specific plant matrix. Pro-technological, sensory and nutritional criteria for selecting starters were reported as well as several functional properties, which were recently ascribed to autochthonous lactic acid bacteria. The main features of the protocols used for the manufacture of traditional, emerging and innovative fermented vegetables and fruits were reviewed. Tailored lactic acid bacteria starters completely exploit the potential of vegetables and fruits, which enhances the hygiene, sensory, nutritional and shelf life properties. Copyright © 2012 Elsevier Ltd. All rights reserved.

Robotics and automation in manufacture

International Nuclear Information System (INIS)

Glasgow, J.R.

1989-01-01

NEI involvement in Heysham II and Torness included contracts for equipment both for the Nuclear Island and for non-nuclear associated plant. Fundamental to the approach to manufacture was the capital investment in plant and facilities to ensure the quality requirements were met with economic production methods and prompt delivery. Some of the production facilities for a selection of varied components are described. Examples of subsequent development of facilities are given to illustrate their current capability. (author)

Acid-base indicator properties of dyes from local plants I: Dyes from ...

African Journals Online (AJOL)

DR. MIKE HORSFALL

Acid-base indicator properties of dyes from local plants I: Dyes from Basella alba. (Indian spinach) and ... solution, which change colour immediately after the equivalence point has .... The pH ranges over which the dyes change colour were ...

Requirements and Possibilities for Operational Experience Feedback from the Plant's Manufacturer's Point of View

International Nuclear Information System (INIS)

Schimann, P.

2010-01-01

A large amount of nations has realized that nuclear energy can contribute sustainable to secure their national energy supply. In the last few years, apart from the established nuclear nations, other, often smaller countries have also decided for themselves to apply the nuclear option to secure their energy supply. This partly takes place in multi-national cooperation between neighboring countries on one side, as well as otherwise between different companies on the manufacturers'/utilities' side. The endeavor of building absolutely safe reactors and of operating them safely requires the necessity on different levels of considering existing and up to date experiences gained in all the nuclear projects' phases. The long time period of many years between the decision on building a nuclear power plant, the licensing procedure, the detailed planning, the construction phase and the commissioning of the plants, results in the necessity of having to incorporate the constant experience gain on all technical and administrative levels. This applies to the safety-related boundary conditions in the frame of a new-build project in the same way as for updating measures performed on existing plants. An often neglected fact, this also applies to the right choice of the guidelines to be applied, to an efficient and competent authority and utility body or to the integration of the appropriate technical specialists and experts. Therefore the utilities and their tasks are confronted with different requirements, depending on whether they are located in the country of responsible nuclear power plant utilities' head quarters or whether they are simply co-owners of a foreign plant. AREVA as company covering the complete nuclear cycle including the corresponding plant construction supports its partners in all project phases including the development of national institutions and knowledge transfer. All of AREVA's existing knowledge - even the recently obtained - is integrated directly in the

Final environmental statement related to the proposed manufacture of floating nuclear power plants by Offshore Power Systems: (Docket No. STN 50-437): Part 2, A generic environmental statement considering the siting and operation of floating nuclear power plants

International Nuclear Information System (INIS)

1976-09-01

The proposed action is the issuance of a manufacturing license to Offshore Power Systems for the startup and operation of a proposed manufacturing facility located at Blount Island, Jacksonville, Florida (Docket No. STN 50-437). No nuclear fuel will be handled or stored at the manufacturing site. The plants will be fueled after they have been towed to and moored within protected basins at specific locations designated by the purchaser and after an operating license has been issued by the Nuclear Regulatory Commission. Each nuclear generating plant, mounted on a floating platform, has a net capacity of 1150 MWe. This energy is provided by a pressurized water reactor steam supply system consisting of a Westinghouse four-loop 3425-MWt unit with an ice-condenser containment system. When one or more of these units is located within a single breakwater, the installation is designated an offshore power station. Volume 2 contains the siting criteria, regulations, effects of construction, effects of operation, and a safety analysis. 2 figs., 2 tabs

Modeled dosage-response relationship on the net photosynthetic rate for the sensitivity to acid rain of 21 plant species.

Science.gov (United States)

Deng, Shihuai; Gou, Shuzhen; Sun, Baiye; Lv, Wenlin; Li, Yuanwei; Peng, Hong; Xiao, Hong; Yang, Gang; Wang, Yingjun

2012-08-01

This study investigated the sensitivity of plant species to acid rain based on the modeled dosage-response relationship on the net photosynthetic rate (P (N)) of 21 types of plant species, subjected to the exposure of simulated acid rain (SAR) for 5 times during a period of 50 days. Variable responses of P (N) to SAR occurred depending on the type of plant. A majority (13 species) of the dosage-response relationship could be described by an S-shaped curve and be fitted with the Boltzmann model. Model fitting allowed quantitative evaluation of the dosage-response relationship and an accurate estimation of the EC(10), termed as the pH of the acid rain resulting in a P (N) 10 % lower than the reference value. The top 9 species (Camellia sasanqua, Cinnamomum camphora, etc. EC(10) ≤ 3.0) are highly endurable to very acid rain. The rare, relict plant Metasequoia glyptostroboides was the most sensitive species (EC(10) = 5.1) recommended for protection.

Priming of plant resistance by natural compounds. Hexanoic acid as a model

Directory of Open Access Journals (Sweden)

Paz eAranega Bou

2014-10-01

Full Text Available Some alternative control strategies of currently emerging plant diseases are based on the use of resistance inducers. This review highlights the recent advances made in the characterization of natural compounds that induce resistance by a priming mechanism. These include vitamins, chitosans, oligogalacturonides, volatile organic compounds, azelaic and pipecolic acid, among others. Overall, other than providing novel disease control strategies that meet environmental regulations, natural priming agents are valuable tools to help unravel the complex mechanisms underlying the induced resistance phenomenon. The data presented in this review reflect the novel contributions made from studying these natural plant inducers, with special emphasis placed on hexanoic acid (Hx, proposed herein as a model tool for this research field. Hx is a potent natural priming agent of proven efficiency in a wide range of host plants and pathogens. It can early activate broad-spectrum defenses by inducing callose deposition and the SA and JA pathways. Later it can prime pathogen-specific responses according to the pathogen’s lifestyle. Interestingly, Hx primes redox-related genes to produce an anti-oxidant protective effect, which might be critical for limiting the infection of necrotrophs. Our Hx-induced resistance (Hx-IR findings also strongly suggest that it is an attractive tool for the molecular characterization of the plant alarmed state, with the added advantage of it being a natural compound.

CAD And Distributed Manufacturing Solutions for Pellet Boiler Producers

Directory of Open Access Journals (Sweden)

Timur Mamut

2016-12-01

Full Text Available The paper is summarizing the research activities that had been carried out for defining an appropriate manufacturing concept and the system architecture for a manufacturing plant of pellet boilers. The concept has been validated through the implementation of a solution of computer integrated manufacturing that includes a CAD platform and a CAM facility including laser cutting machines, rolling and welding machines and advanced technologies for assembly, quality control and testing.

Stable isotope fingerprinting: a novel method for identifying plant, fungal, or bacterial origins of amino acids

Science.gov (United States)

Thomas Larsen; D. Lee Taylor; Mary Beth Leigh; Diane M. O' Brien

2009-01-01

Amino acids play an important role in ecology as essential nutrients for animals and as currencies in symbiotic associations. Here we present a new approach to tracing the origins of amino acids by identifying unique patterns of carbon isotope signatures generated by amino acid synthesis in plants, fungi, and bacteria ("13C fingerprints...

76 FR 28318 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

Science.gov (United States)

2011-05-17

... Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants AGENCY... Emission Standards for Hazardous Air Pollutants from the Portland Cement Manufacturing Industry Response to... by the Portland Cement Industry and the New Source Performance Standards for Portland Cement Plants...

Production of cinnamic and p-hydroxycinnamic acids in engineered microbes

Directory of Open Access Journals (Sweden)

Alejandra eVargas-Tah

2015-08-01

Full Text Available The aromatic compounds cinnamic and p-hydroxycinnamic acids are phenylpropanoids having applications as precursors for the synthesis of thermoplastics, flavoring, cosmetic and health products. These two aromatic acids can be obtained by chemical synthesis or extraction from plant tissues. However, both manufacturing processes have shortcomings such as the generation of toxic subproducts or a low concentration in plant material. Alternative production methods are being developed to enable the biotechnological production of cinnamic and p-hydroxycinnamic acids by genetically engineering various microbial hosts, including Escherichia coli, Saccharomyces cerevisiae, Pseudomonas putida and Streptomyces lividans. The natural capacity to synthesize these aromatic acids is not existent in these microbial species. Therefore, genetic modification have been performed that include the heterologous expression of genes encoding phenylalanine ammonia-lyase and tyrosine ammonia-lyase activities, which catalyze the conversion of L-phenylalanine and L-tyrosine to cinnamic acid and p-hydroxycinnamic acid, respectively. Additional host modifications include the metabolic engineering to increase carbon flow from central metabolism to the L-phenylalanine or L-tyrosine biosynthetic pathways. These strategies include the expression of feedback insensitive mutant versions of enzymes from the aromatic pathways, as well as genetic modifications to central carbon metabolism to increase biosynthetic availability of precursors phosphoenolpyruvate and erythrose-4-phosphate. These efforts have been complemented with strain optimization for the utilization of raw material, including various simple carbon sources, as well as sugar polymers and sugar mixtures derived from plant biomass. A systems biology approach to production strains characterization has been limited so far and should yield important data for future strain improvement.

Thermal treatment and non-thermal technologies for remediation of manufactured gas plant sites

International Nuclear Information System (INIS)

McGowan, T.F.; Greer, B.A.; Lawless, M.

1996-01-01

More than 1,500 manufactured gas plant (MGP) sites exist throughout the US. Many are contaminated with coal tar from coal-fueled gas works which produced town gas from the mid-1800s through the 1950s. Virtually all old US cities have such sites. Most are in downtown areas as they were installed for central distribution of manufactured gas. While a few sites are CERCLA/Superfund, most are not. However, the contaminants and methods used for remediation are similar to those used for Superfund clean-ups of coal tar contamination from wood-treating and coke oven facilities. Clean-up of sites is triggered by regulatory pressure, property transfers and re-development as well as releases to the environment--in particular, via groundwater migration. Due to utility de-regulation, site clean-ups may also be triggered by sale of a utility or of a specific utility site to other utilities. Utilities have used two approaches in dealing with their MGP sites. The first is do nothing and hope for the best. History suggests that, sooner or later, these sites become a bigger problem via a release, citizen lawsuit or regulatory/public service commission intervention. The second, far better approach is to define the problem now and make plans /for waste treatment or immobilization. This paper describes recent experience with a high capacity/low cost thermal desorption process for this waste and reviews non-thermal technology, such as bio-treatment, capping, recycling, and dig and haul. Cost data are provided for all technologies, and a case study for thermal treatment is also presented

Supply chain integration, risk management and manufacturing flexibility

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Boer, Harry; Taran, Yariv

2018-01-01

, respectively, and manufacturing flexibility. Design/methodology/approach – Using hierarchical regression, data are analyzed from a sample of 343 manufacturing plants in Asia collected in 2013-2014 as part of the International Manufacturing Strategy Survey (IMSS VI). Findings – Internal integration and supply......Purpose – The purpose of this paper is to investigate the impact of internal integration, external integration and supply chain risk management on manufacturing flexibility, and the moderating effect of supply chain risk management on the relationships between internal and external integration...... chain risk management have a direct effect on manufacturing flexibility. Supply chain risk management moderates the relationship between external integration and flexibility. Research limitations/implications – Further research is needed to generalize beyond the flexibility performance of discrete...

Spatial distribution of organic pollutants in industrial construction and demolition waste and their mutual interaction on an abandoned pesticide manufacturing plant.

Science.gov (United States)

Huang, Sheng; Zhao, Xin; Sun, Yanqiu; Ma, Jianli; Gao, Xiaofeng; Xie, Tian; Xu, Dongsheng; Yu, Yi; Zhao, Youcai

2016-04-01

A comprehensive field investigation of organic pollutants was examined in industrial construction and demolition waste (ICDW) inside an abandoned pesticide manufacturing plant. Concentrations of eight types of pesticides, a metabolite and two intermediates were studied. The ICDW was under severe and long-term contamination by organophosphorus, intermediates and pyrethroid pesticide with mean concentrations of 23,429, 3538 and 179.4 mg kg(-1), respectively. FT-IR analysis suggested that physical absorption and chemical bonding were their mutual interaction forms. Patterns of total pesticide spatial distribution showed good correlations with manufacturing processes spreading all over the plant both in enclosed workshops and in residues randomly dumped outside, while bricks and coatings were the most vulnerable to pollutants. Ultimately the fate of the OPPs was diversified as the immersion of ICDW in water largely transferred the pollutants into aquatic systems while exposure outside did not largely lead to pesticide degradation. The adoption of centralized collections for the disposal of wastes could only eliminate part of the contaminated ICDW, probably due to lack of knowledge and criteria. Correlation matrix and cluster analysis indicated that regulated disposal and management of polluted ICDW was effective, thus presenting the requirement for its appropriate disposal.

Manufacture of fuel and fuel channels and their performance in Indian PHWRs'

International Nuclear Information System (INIS)

Kalidas, R.

2005-01-01

Nuclear Fuel Complex (NFC) at Hyderabad is conglomeration of chemical, metallurgical and mechanical plants, processing uranium and zirconium in two separate streams and culminating in the fuel assembly plant. Apart from manufacturing fuel for Pressurised Heavy Water Reactors (PHWRs) and Boiling Water Reactors (BWRs), NFC is also engaged in the manufacture of reactor core structurals for these reactors. NFC has carried our several technological developments over the years and implemented them for the manufacture of fuel, calandria tubes and pressure tubes for PHWRs. Keeping in pace with the Nuclear Power Programme envisaged by the Department of Atomic Energy, NFC had augmented its production capacities in all these areas. The paper highlights several actions initiated in the areas of fuel design, fuel manufacturing, manufacturing of zirconium alloy core structurals, fuel clad tubes and components and their performance in Indian PHWRs. (author)

Plant Hormone Salicylic Acid Produced by a Malaria Parasite Controls Host Immunity and Cerebral Malaria Outcome.

Directory of Open Access Journals (Sweden)

Ryuma Matsubara

Full Text Available The apicomplexan parasite Toxoplasma gondii produces the plant hormone abscisic acid, but it is unclear if phytohormones are produced by the malaria parasite Plasmodium spp., the most important parasite of this phylum. Here, we report detection of salicylic acid, an immune-related phytohormone of land plants, in P. berghei ANKA and T. gondii cell lysates. However, addition of salicylic acid to P. falciparum and T. gondii culture had no effect. We transfected P. falciparum 3D7 with the nahG gene, which encodes a salicylic acid-degrading enzyme isolated from plant-infecting Pseudomonas sp., and established a salicylic acid-deficient mutant. The mutant had a significantly decreased concentration of parasite-synthesized prostaglandin E2, which potentially modulates host immunity as an adaptive evolution of Plasmodium spp. To investigate the function of salicylic acid and prostaglandin E2 on host immunity, we established P. berghei ANKA mutants expressing nahG. C57BL/6 mice infected with nahG transfectants developed enhanced cerebral malaria, as assessed by Evans blue leakage and brain histological observation. The nahG-transfectant also significantly increased the mortality rate of mice. Prostaglandin E2 reduced the brain symptoms by induction of T helper-2 cytokines. As expected, T helper-1 cytokines including interferon-γ and interleukin-2 were significantly elevated by infection with the nahG transfectant. Thus, salicylic acid of Plasmodium spp. may be a new pathogenic factor of this threatening parasite and may modulate immune function via parasite-produced prostaglandin E2.

Effect of the structure of gallic acid and its derivatives on their interaction with plant ferritin.

Science.gov (United States)

Wang, Qunqun; Zhou, Kai; Ning, Yong; Zhao, Guanghua

2016-12-15

Gallic acid and its derivatives co-exist with protein components in foodstuffs, but there is few report on their interaction with proteins. On the other hand, plant ferritin represents not only a novel class of iron supplement, but also a new nanocarrier for encapsulation of bioactive nutrients. However, plant ferritin is easy to be degraded by pepsin in the stomach, thereby limiting its application. Herein, we investigated the interaction of gallic acid and its derivatives with recombinant soybean seed H-2 ferritin (rH-2). We found that these phenolic acids interacted with rH-2 in a structure-dependent manner; namely, gallic acid (GA), methyl gallate (MEGA) and propyl gallate (PG) having three HO groups can bind to rH-2, while their analogues with two HO groups cannot. Consequently, such binding largely inhibited ferritin degradation by pepsin. These findings advance our understanding of the relationship between the structure and function of phenolic acids. Copyright © 2016 Elsevier Ltd. All rights reserved.

Influence of nonylphenol on the fatty acids and hydrocarbon composition of aquatic plants

Directory of Open Access Journals (Sweden)

І. О. Osinna

2009-11-01

Full Text Available Composition of surface lipids of aquatic plants Acorus calamus L., Typha latifolia L. and Carex acuta L. was investigated under the influence of nonylphenol strong solution. Experimental plants showed some significant changes in the surface lipids composition in comparison with a control. Change in the fatty acids composition, decrease of hydrocarbons content and biosynthetical disorder in the elongation processes of some certain components were revealed.

Demonstration of acid and water recovery systems: Applicability and operational challenges in Indian metal finishing SMEs.

Science.gov (United States)

Balakrishnan, M; Batra, R; Batra, V S; Chandramouli, G; Choudhury, D; Hälbig, T; Ivashechkin, P; Jain, J; Mandava, K; Mense, N; Nehra, V; Rögener, F; Sartor, M; Singh, V; Srinivasan, M R; Tewari, P K

2018-07-01

Diffusion dialysis, acid retardation and nanofiltration plants were acquired from Europe and demonstrated in several Indian metal finishing companies over a three year period. These companies are primarily small and medium enterprises (SMEs). Free acid recovery rate from spent pickling baths using diffusion dialysis and retardation was in the range of 78-86% and 30-70% respectively. With nanofiltration, 80% recovery rate of rinse water was obtained. The demonstrations created awareness among the metal finishing companies to reuse resources (acid/water) from the effluent streams. However, lack of efficient oil separators, reliable chemical analysis and trained personnel as well as high investment cost limit the application of these technologies. Local manufacturing, plant customization and centralized treatment are likely to encourage the uptake of such technologies in the Indian metal finishing sector. Copyright © 2018 Elsevier Ltd. All rights reserved.

Characteristics of dioxin emissions from a Waelz plant with acid and basic kiln mode.

Science.gov (United States)

Hung, Pao Chen; Chi, Kai Hsien; Chen, Mei Lien; Chang, Moo Been

2012-01-30

The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were measured in the flue gas of a Waelz plant operated in acid and basic modes, respectively. To abate (PCDD/F) and other pollutants, the plant operates with a post-treatment of flue gases by activated carbon injection and subsequent filtration. Relatively high PCDD/F discharge by fly ashes is found with acid kiln mode of the Waelz process. Therefore, basic kiln mode of the Waelz process is investigated and compared in this plant. With the adsorbent injection rate of 7 kg/h (95 mg/Nm(3)), the PCDD/F concentration in stack gas was measured as 0.123 ng I-TEQ/Nm(3) in the basic operating mode. The added Ca(OH)(2) reacted with metal catalysts and HCl((g)) in the flue gas and thus effectively suppressed the formation of PCDD/Fs. PCDD/F concentrations in fly ashes sampled from the dust settling chamber, cyclone, primary filter and secondary filter in basic kiln mode were significantly lower than that in acid kiln mode. Total PCDD/F emission on the basis of treating one kg of electric arc furnace dust in the basic operation mode was 269 ng I-TEQ/kg EAF-dust treated which was significantly lower than that in acid mode (640 ng I-TEQ/kg EAF-dust treated). Copyright © 2011 Elsevier B.V. All rights reserved.

Antiviral Roles of Abscisic Acid in Plants

Directory of Open Access Journals (Sweden)

Mazen Alazem

2017-10-01

Full Text Available Abscisic acid (ABA is a key hormone involved in tuning responses to several abiotic stresses and also has remarkable impacts on plant defense against various pathogens. The roles of ABA in plant defense against bacteria and fungi are multifaceted, inducing or reducing defense responses depending on its time of action. However, ABA induces different resistance mechanisms to viruses regardless of the induction time. Recent studies have linked ABA to the antiviral silencing pathway, which interferes with virus accumulation, and the micro RNA (miRNA pathway through which ABA affects the maturation and stability of miRNAs. ABA also induces callose deposition at plasmodesmata, a mechanism that limits viral cell-to-cell movement. Bamboo mosaic virus (BaMV is a member of the potexvirus group and is one of the most studied viruses in terms of the effects of ABA on its accumulation and resistance. In this review, we summarize how ABA interferes with the accumulation and movement of BaMV and other viruses. We also highlight aspects of ABA that may have an effect on other types of resistance and that require further investigation.

Westinghouse fuel manufacturing systems: a step change in performance improvements

International Nuclear Information System (INIS)

Mutyala, Meena

2009-01-01

Today's competitive electrical generation industry demands that nuclear power plant operators minimize total operating costs, including fuel cycle cost while maintaining flawless fuel performance. The mission of Westinghouse Nuclear Fuel is to be the industry's most responsive supplier of flawless, value added fuel products and services, as judged by our customers. As nuclear is fast becoming the choice of many countries, existing manufacturing plants and facilities are once again running at full capacity. In this context Westinghouse Nuclear Fuel is committed to deliver a step change in performance improvement worldwide through its manufacturing operations by the introduction of a set of fundamentals collectively named the 'Westinghouse Fuel Manufacturing System' (WFMS), whose key principles are discussed in this paper. (author)

Continuous acid dew point measurement in coal-fired power plants; Kontinuierliche Saeuretaupunktmessung in Braunkohlekraftwerken

Energy Technology Data Exchange (ETDEWEB)

Foedisch, Holger; Schulz, Joerg; Schengber, Petra; Dietrich, Gabriele [Dr. Foedisch Umweltmesstechnik AG, Markranstaedt (Germany)

2009-07-01

The reduction of flue gas losses is one option to increase power plant efficiency. The target is the optimised low waste gas temperature. When applying lignite and other high-sulphur fuels the temperature of the flue gas is mainly determined by the acid dew point. Temperature of the flue gas system is to amount some 10 to 20 K above the assumed acid dew point. The acid dew point measuring system AMD 08 is able to detect the real acid dew point in a quasi-continuous way. Thus, it is possible to deliberately decrease waste gas temperature. (orig.)

Occurrence of fatty acid short-chain-alkyl esters in fruits of Celastraceae plants.

Science.gov (United States)

Sidorov, Roman A; Zhukov, Anatoly V; Pchelkin, Vasily P; Vereshchagin, Andrei G; Tsydendambaev, Vladimir D

2013-06-01

Small amounts of a mixture of fatty acid short-chain-alkyl esters (FASCAEs) were obtained from the fruits of twelve plant species of Celastraceae family, and in five of them the FASCAEs were present not only in the arils but also in the seeds. These mixtures contained 32 individual FASCAE species, which formed four separate fractions, viz. FA methyl, ethyl, isopropyl, and butyl esters (FAMEs, FAEEs, FAIPEs, and FABEs, resp.). The FASCAE acyl components included the residues of 16 individual C₁₄-C₂₄ saturated, mono-, di-, and trienoic FAs. Linoleic, oleic, and palmitic acids, and, in some cases, also α-linolenic acid predominated in FAMEs and FAEEs, while myristic acid was predominant in FAIPEs. It can be suggested that, in the fruit arils of some plant species, FAMEs and FAEEs were formed at the expense of a same FA pool characteristic of a given species and were strongly different from FAIPEs and FABEs esters regarding the mechanism of their biosynthesis. However, as a whole, the qualitative and quantitative composition of various FASCAE fractions, as well as their FA composition, varied considerably depending on various factors. Therefore, separate FASCAE fractions seem to be synthesized from different FA pools other than those used for triacylglycerol formation. Copyright © 2013 Verlag Helvetica Chimica Acta AG, Zürich.

Plant-based Paste Fermented by Lactic Acid Bacteria and Yeast: Functional Analysis and Possibility of Application to Functional Foods

Directory of Open Access Journals (Sweden)

Shinsuke Kuwaki

2012-01-01

Full Text Available A plant-based paste fermented by lactic acid bacteria and yeast (fermented paste was made from various plant materials. The paste was made of fermented food by applying traditional food-preservation techniques, that is, fermentation and sugaring. The fermented paste contained major nutrients (carbohydrates, proteins, and lipids, 18 kinds of amino acids, and vitamins (vitamin A, B 1 B 2 , B 6 , B 12 , E, K, niacin, biotin, pantothenic acid, and folic acid. It contained five kinds of organic acids, and a large amount of dietary fiber and plant phytochemicals. Sucrose from brown sugar, used as a material, was completely resolved into glucose and fructose. Some physiological functions of the fermented paste were examined in vitro. It was demonstrated that the paste possessed antioxidant, antihypertensive, antibacterial, anti-inflammatory, anti-allergy and anti-tyrosinase activities in vitro. It was thought that the fermented paste would be a helpful functional food with various nutrients to help prevent lifestyle diseases.

Solvent extraction for remediation of manufactured gas plant sites

International Nuclear Information System (INIS)

Luthy, R.G.; Dzombak, D.A.; Peters, C.; Ali, M.A.; Roy, S.B.

1992-12-01

This report presents the results of an initial assessment of the feasibility of solvent extraction for removing coal tar from the subsurface or for treating contaminated soil excavated at manufactured gas plant (MGP) sites. In situ solvent extraction would involve injection, recovery, and reclamation for reinjection of an environmentally-benign, water-miscible solvent. Accelerated dissolution and removal of coaltar from the subsurface might be desirable as a remedial approach if excavation is not practical (e.g., the site underlies facilities in current use), direct pumping of coal tar is ineffective, and bioremediation is not feasible because of the presence of high concentrations of coal tar. Both laboratory experiments and engineering evaluations were performed to provide a basis for the initial feasibility assessment. Laboratory work included identification and evaluation of promising solvents, measurement of fundamental properties of coal tar-solvent-water systems, and measurement of rates of dissolution of coal tar in porous media into flowing solvent-water solutions. Engineering evaluations involved identification of common hydrogeologic features and contaminant distributions at MGP sites, and identification and evaluation of possible injection-recovery well deployment schemes. A coupled flow-chemistry model was developed for simulation of the in situ process and evaluation of the well deployment schemes. Results indicate that in situsolvent extraction may be able to recover a significant amount of coal tar from the subsurface within a reasonable time frame (on the order of one year or so) provided that subsurface conditions are conducive to process implementation. Some important implementation issues remain to be addressed

Ecological and Economic Assessment of Micro-/Milli-Continuous Campaign Manufacturing: The Case of Writing Ink

Directory of Open Access Journals (Sweden)

Laura Grundemann

2014-03-01

Full Text Available Many products from the fine chemicals and pharmaceuticals industries are currently manufactured batch-wise in multi-product plants. However, this processing scheme suffers from severe drawbacks, such as a high specific energy demand, cleaning costs and high staff requirements. Transferring batch into continuous campaign productions may overcome these drawbacks. Using the case of writing ink, such a continuous manufacturing scheme was developed employing micro- and milli-structured components in order to intensify certain unit operations. In this paper, an ecological and economic assessment of both production concepts considering all lifecycle stages is presented. The aim of our work is to highlight the advantages and disadvantages of the two multi-product plants and to derive recommendations for the most efficient design and operation of a continuous campaign manufacturing plant. The results show that lower environmental impacts are related to continuous processing, which is due to the option for energy integration in this case. Furthermore, in the economic assessment, continuous processing proved to be economically viable. In this case, reduced staff requirements based on a highly automated manufacturing plant are the key to lower personnel costs. In general, the results emphasize the importance of such micro-/milli-continuous multi-product plants for the future manufacturing of newly developed products in the mentioned industries.

A laboratory method to estimate the efficiency of plant extract to neutralize soil acidity

Directory of Open Access Journals (Sweden)

Marcelo E. Cassiolato

2002-06-01

Full Text Available Water-soluble plant organic compounds have been proposed to be efficient in alleviating soil acidity. Laboratory methods were evaluated to estimate the efficiency of plant extracts to neutralize soil acidity. Plant samples were dried at 65ºC for 48 h and ground to pass 1 mm sieve. Plant extraction procedure was: transfer 3.0 g of plant sample to a becker, add 150 ml of deionized water, shake for 8 h at 175 rpm and filter. Three laboratory methods were evaluated: sigma (Ca+Mg+K of the plant extracts; electrical conductivity of the plant extracts and titration of plant extracts with NaOH solution between pH 3 to 7. These methods were compared with the effect of the plant extracts on acid soil chemistry. All laboratory methods were related with soil reaction. Increasing sigma (Ca+Mg+K, electrical conductivity and the volume of NaOH solution spent to neutralize H+ ion of the plant extracts were correlated with the effect of plant extract on increasing soil pH and exchangeable Ca and decreasing exchangeable Al. It is proposed the electrical conductivity method for estimating the efficiency of plant extract to neutralize soil acidity because it is easily adapted for routine analysis and uses simple instrumentations and materials.Tem sido proposto que os compostos orgânicos de plantas solúveis em água são eficientes na amenização da acidez do solo. Foram avaliados métodos de laboratório para estimar a eficiência dos extratos de plantas na neutralização da acidez do solo. Os materiais de plantas foram secos a 65º C por 48 horas, moídos e passados em peneira de 1mm. Utilizou-se o seguinte procedimento para obtenção do extrato de plantas: transferir 3.0 g da amostra de planta para um becker, adicionar 150 ml de água deionizada, agitar por 8h a 175 rpm e filtrar. Avaliaram-se três métodos de laboratório: sigma (Ca + Mg + K do extrato de planta, condutividade elétrica (CE do extrato de planta e titulação do extrato de planta com solu

Organic Acids: The Pools of Fixed Carbon Involved in Redox Regulation and Energy Balance in Higher Plants

Directory of Open Access Journals (Sweden)

Abir U Igamberdiev

2016-07-01

Full Text Available Organic acids are synthesized in plants as a result of the incomplete oxidation of photosynthetic products and represent the stored pools of fixed carbon accumulated due to different transient times of conversion of carbon compounds in metabolic pathways. When redox level in the cell increases, e.g., in conditions of active photosynthesis, the tricarboxylic acid (TCA cycle in mitochondria is transformed to a partial cycle supplying citrate for the synthesis of 2-oxoglutarate and glutamate (citrate valve, while malate is accumulated and participates in the redox balance in different cell compartments (via malate valve. This results in malate and citrate frequently being the most accumulated acids in plants. However, the intensity of reactions linked to the conversion of these compounds can cause preferential accumulation of other organic acids, e.g., fumarate or isocitrate, in higher concentrations than malate and citrate. The secondary reactions, associated with the central metabolic pathways, in particularly with the TCA cycle, result in accumulation of other organic acids that are derived from the intermediates of the cycle. They form the additional pools of fixed carbon and stabilize the TCA cycle. Trans-aconitate is formed from citrate or cis-aconitate, accumulation of hydroxycitrate can be linked to metabolism of 2-oxoglutarate, while 4-hydroxy-2-oxoglutarate can be formed from pyruvate and glyoxylate. Glyoxylate, a product of either glycolate oxidase or isocitrate lyase, can be converted to oxalate. Malonate is accumulated at high concentrations in legume plants. Organic acids play a role in plants in providing redox equilibrium, supporting ionic gradients on membranes, and acidification of the extracellular medium.

Downstream process development in biotechnological itaconic acid manufacturing.

Science.gov (United States)

Magalhães, Antonio Irineudo; de Carvalho, Júlio Cesar; Medina, Jesus David Coral; Soccol, Carlos Ricardo

2017-01-01

Itaconic acid is a promising chemical that has a wide range of applications and can be obtained in large scale using fermentation processes. One of the most important uses of this biomonomer is the environmentally sustainable production of biopolymers. Separation of itaconic acid from the fermented broth has a considerable impact in the total production cost. Therefore, optimization and high efficiency downstream processes are technological challenges to make biorefineries sustainable and economically viable. This review describes the current state of the art in recovery and purification for itaconic acid production via bioprocesses. Previous studies on the separation of itaconic acid relying on operations such as crystallization, precipitation, extraction, electrodialysis, diafiltration, pertraction, and adsorption. Although crystallization is a typical method of itaconic acid separation from fermented broth, other methods such as membrane separation and reactive extraction are promising as a recovery steps coupled to the fermentation, potentially enhancing the overall process yield. Another approach is adsorption in fixed bed columns, which efficiently separates itaconic acid. Despite recent advances in separation and recovery methods, there is still space for improvement in IA recovery and purification.

Value Chain Model for Steel Manufacturing Sector: A Case Study

OpenAIRE

S G Acharyulu; K Venkata Subbaiah; K Narayana Rao

2018-01-01

Michael E Porter developed a value chain model for manufacturing sector with five primary activities and four supporting activities. The value chain model developed by Porter is extended to a steel manufacturing sector due to expansions of steel plants has become a continual process for their growth and survival. In this paper a value chain model for steel manufacturing sector is developed considering five primary activities and six support activities.

Test fabrication of sulfuric acid decomposer applied for thermochemical hydrogen production IS process

International Nuclear Information System (INIS)

Noguchi, Hiroki; Terada, Atsuhiko; Kubo, Shinji; Onuki, Kaoru; Hino, Ryutaro; Ota, Hiroyuki

2007-07-01

Thermo-chemical Iodine-Sulfur (IS) process produces large amount of hydrogen effectively without carbon dioxide emission. Since the IS process uses strong acids such as sulfuric acid and hydriodic acid, it is necessary to develop large-scale chemical reactors featuring materials that exhibit excellent heat and corrosion resistance. A sulfuric acid decomposer is one of the key components of the IS process plant, in which sulfuric acid is evaporated and decomposed into water and sulfur trioxide under temperature range from 300degC to 500degC using the heat supplied by high temperature helium gas. The decomposer is exposed to severe corrosion condition of sulfuric acid boiling flow, where only the SiC ceramics shows good corrosion resistance. However, at the current status, it is very difficult to manufacture the large-scale SiC ceramics structure required in the commercial plant. Therefore, we devised a new concept of the decomposer, which featured a counter flow type heat exchanger consisting of cylindrical blocks made of SiC ceramics. Scale up can be realized by connecting the blocks in parallel and/or in series. This paper describes results of the design work and the test-fabrication study of the sulfuric acid decomposer, which was carried out in order to confirm its feasibility. (author)

27 CFR 19.374 - Manufacture of nonbeverage products, intermediate products, or eligible flavors.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Manufacture of nonbeverage... PLANTS Processing Operations Other Than Denaturation and Manufacture of Articles Receipt and Use of Spirits, Wines and Alcoholic Flavoring Materials § 19.374 Manufacture of nonbeverage products...

Fatty acid production by four strains of Mucor hiemalis grown in plant ...

African Journals Online (AJOL)

SERVER

2007-08-06

Aug 6, 2007 ... Four Mucor hiemalis strains (M1, M2, M3 and M4), isolated from soil at a depth of 0 - 15 ... Plant oils were inhibitors of fatty acid production by these strains. .... The procedure was adapted from Kates (1982) and Kennedy et al.

Role of ascorbic acid and α tocopherol in alleviating salinity stress on flax plant (Linum usitatissimum L.

Directory of Open Access Journals (Sweden)

Mervat Sh. Sadak

2014-03-01

Full Text Available Salinity is one of the environmental challenges in the world affecting on several physiological processes and the most limiting factor of plant productivity and quality. Two pot experiments were conducted at the wire house of National Research Centre, Cairo, Egypt during two successive seasons of 2010/2011 and 2011/2012 to assess the efficiency of two antioxidant vitamins (ascorbic acid at 1.13 and 2.27 mM or α tocopherol at 0.46 and 0.93 mM and/or salinity stress at (0.0, 3.08, 6.16, 9.23 ds/m on photosynthetic pigments, protein, carbohydrate, minerals, oil contents and yield as well as fatty acids composition of the yielded oils of three flax cultivars (Sakha 3, Giza 8 and Ariane. The data revealed that salinity stress caused significant and gradual decreases in total photosynthetic pigments, polysaccharides, total carbohydrates, total proteins and the uptake of Mg, K, Ca and P in the leaves of three flax cultivars with increasing salinity levels (3.08, 6.16, 9.23 ds/m. Otherwise, significant and gradual increase appeared in both Na and Cl. Ascorbic acid and α tocopherol at different concentrations caused significant increases in photosynthetic pigments, total carbohydrates and protein contents in the leaves of flax plants irrigated either with tap water or saline solution as compared with their corresponding controls. Exogenous application of ascorbic and α tocopherol at different concentrations exhibited decreases in Na and Cl whereas increases appeared in Mg, K, Ca and P relative to their corresponding control. Ascorbic acid (1.13 and 2.27 mM and α tocopherol (0.46 and 0.93 mM caused marked increases in yield and yield attributes of three flax cultivars either in plants irrigated with tap water or saline solution as compared to corresponding control. Ascorbic acid effects were more pronounced than α tocopherol effects. In addition, the higher level of two vitamins was more pronounced than the lower level. Regarding plants irrigated

1000kW on-site PAFC power plant development and demonstration

Energy Technology Data Exchange (ETDEWEB)

Satomi, Tomohide; Koike, Shunichi [Phosphoric Acid Fuel Cell Technology Research Association (PAFC-TRA), Osaka (Japan); Ishikawa, Ryou [New Energy and Industrial Technology Development Organization (NEDO), Tokyo (Japan)

1996-12-31

Phosphoric Acid Fuel Cell Technology Research Association (PAFC-TRA) and New Energy and Industrial Technology Development Organization (NEDO) have been conducting a joint project on development of a 5000kW urban energy center type PAFC power plant (pressurized) and a 1000kW on-site PAFC power plant (non-pressurized). The objective of the technical development of 1000kW on-site PAFC power plant is to realize a medium size power plant with an overall efficiency of over 70% and an electrical efficiency of over 36%, that could be installed in a large building as a cogeneration system. The components and system integration development work and the plant design were performed in 1991 and 1992. Manufacturing of the plant and installation at the test site were completed in 1994. PAC test was carried out in 1994, and generation test was started in January 1995. Demonstration test is scheduled for 1995 and 1996.

New CHP plant for a rubber products manufacturer

International Nuclear Information System (INIS)

Vila, R.; Martí, C.

2016-01-01

At the end of 2014 the company Industrias de Hule Galgo decided to undertake the installation project of an efficient CHP plant for its production plant, with the aim of bringing down energy costs and improving the company’s competitive position in the market. The new plant has already started its first operational phase. The project has comprised the installation of a single cycle with gas-powered gensets providing a total electrical capacity of 6.6 MW. This provides the necessary thermal oil for the production plant; covers 100% of the electrical power consumed by the industrial complex; and also generates cooling water, giving improved production capacity by supercooling the extrusion system. To execute these works, Industrias de Hule Galgo contracted the services of engineering company AESA to provide the engineering, procurement and construction of the CHP plant. (Author)

Susceptibility of riparian wetland plants to perfluorooctanoic acid (PFOA) accumulation.

Science.gov (United States)

Mudumbi, J B N; Ntwampe, S K O; Muganza, M; Okonkwo, J O

2014-01-01

As plants have been shown to accumulate organic compounds from contaminated sediments, there is a potential for long-lasting ecological impact as a result of contaminant accumulation in riparian areas of wetlands, particularly the accumulation of non-biodegradable contaminants such as perfluorooctanoic acid (PFOA). In this study, commonly found riparian wetland plants including reeds, i.e., Xanthium strumarium, Phragmites australis, Schoenoplectus corymbosus, Ruppia maritime; Populus canescens, Polygonum salicifolium, Cyperus congestus; Persicaria amphibian, Ficus carica, Artemisia schmidtiana, Eichhornia crassipes, were studied to determine their susceptibility to PFOA accumulation from PFOA contaminated riparian sediment with a known PFOA concentration, using liquid chromatography/tandem mass spectrometry (LC/MS/MS). The bioconcentration factor (BCF) indicated that the plants affinity to PFOA accumulation was; E. crassipes, > P. sali-cifolium, > C. congestus, > P. x canescens, > P. amphibian, > F. carica, > A. schmidtiana, > X. strumarium,> P. australis, > R. maritime, > S. corymbosus. The concentration of PFOA in the plants and/or reeds was in the range 11.7 to 38 ng/g, with a BCF range of 0.05 to 0.37. The highest BCF was observed in sediment for which its core water had a high salinity, total organic carbon and a pH which was near neutral. As the studied plants had a higher affinity for PFOA, the resultant effect is that riparian plants such as E. crassipes, X. strumarium, and P. salicifolium, typified by a fibrous rooting system, which grow closer to the water edge, exacerbate the accumulation of PFOA in riparian wetlands.

Metabolic regulation of the plant hormone indole-3-acetic acid

Energy Technology Data Exchange (ETDEWEB)

Jerry D. Cohen

2009-11-01

The phytohormone indole-3-acetic acid (IAA, auxin) is important for many aspects of plant growth, development and responses to the environment yet the routes to is biosynthesis and mechanisms for regulation of IAA levels remain important research questions. A critical issue concerning the biosynthesis if IAA in plants is that redundant pathways for IAA biosynthesis exist in plants. We showed that these redundant pathways and their relative contribution to net IAA production are under both developmental and environmental control. We worked on three fundamental problems related to how plants get their IAA: 1) An in vitro biochemical approach was used to define the tryptophan dependent pathway to IAA using maize endosperm, where relatively large amounts of IAA are produced over a short developmental period. Both a stable isotope dilution and a protein MS approach were used to identify intermediates and enzymes in the reactions. 2) We developed an in vitro system for analysis of tryptophan-independent IAA biosynthesis in maize seedlings and we used a metabolite profiling approach to isolate intermediates in this reaction. 3) Arabidopsis contains a small family of genes that encode potential indolepyruvate decarboxylase enzymes. We cloned these genes and studied plants that are mutant in these genes and that over-express each member in the family in terms of the level and route of IAA biosynthesis. Together, these allowed further development of a comprehensive picture of the pathways and regulatory components that are involved in IAA homeostasis in higher plants.

Stability of picrotoxin during yogurt manufacture and storage.

Science.gov (United States)

Jablonski, J E; Jackson, L S

2008-10-01

Picrotoxin is a neurotoxin found in the berries of Anamirta cocculus, a plant native to Southeast Asia. Picrotoxin has potential for being used as a biological weapon since the toxin is relatively easy to isolate and purify. Limited information exists on the stability and detection of picrotoxin added to foods before or after processing. The objective of this study was to determine the stability of picrotoxin during yogurt manufacture and storage. Direct, cup-set yogurt was produced by using methods that mimic the conditions used in full-scale production of yogurt. Milk (full-fat or low-fat) was pasteurized at 85 degrees C for 30 min, and then cooled to 43 degrees C. Yogurt starter culture (thermophilic culture or thermophilic + probiotic culture) and picrotoxin (200 mug/mL milk) were added. Samples of yogurt during fermentation (5 to 6 h, 43 degrees C) and during 30 d refrigerated (4 to 6 degrees C) storage were analyzed for pH, titratable acidity, and picrototoxin levels. Regardless of starter culture used or fat content of milk, there were no significant differences in the pH and titratable acidities of the picrotoxin-spiked yogurt and the control yogurt (no added picrotoxin) during fermentation and up to 4 wk of refrigerated storage. The color or texture of the yogurt was not affected by addition of picrotoxin. Levels of picrotoxinin and picrotin (components of picrotoxin) in yogurt, as measured by LC/MS (APCI(+)/SIR) did not change significantly during fermentation and storage. A separate experiment determined that addition of picrotoxin to milk before pasteurization (85 degrees C, 30 min) did not affect picrotoxin stability. These results indicate that picrotoxin is stable in yogurt during manufacture and storage.

Effect of molybdenum status on the ascorbic acid content of plants in sand culture

Energy Technology Data Exchange (ETDEWEB)

Hewitt, E J; Agarwala, S C; Jones, E W

1950-12-30

The role of molybdenum in higher plants is generally thought to be closely connected with the assimilation of nitrate nitrogen. The nature of the system involved in nitrate assimilation and the step activated by molybdenum are still obscure. Preliminary results are presented which indicate that molydenum deficiency consistently causes a striking and generally significant reduction in the apparent ascorbic acid content of several crops. Molydenum-deficient plants were also injected through the petioles with molybdenum; there was a detectable rise in ascorbic acid content in 24 hr. The first visual response to molybdenum was just perceptible in three days as chlorophyll formation, and growth response could be detected about seven days after injection. Several hypotheses to account for the results obtained are discussed. 13 references, 1 table.

Comparative assessment of coal tars obtained from 10 former manufactured gas plant sites in the eastern United States

Energy Technology Data Exchange (ETDEWEB)

Brown, D.G.; Gupta, L.; Kim, T.H.; Moo-Young, H.K.; Coleman, A.J. [Lehigh University, Bethlehem, PA (United States). Dept. of Civil & Environmental Engineering

2006-11-15

A comparative analysis was performed on eleven coal tars obtained from former manufactured gas plant sites in the eastern United States. Bulk properties analyzed included percent ash, Karl Fisher water content, viscosity and average molecular weight. Chemical properties included monocyclic- and polycyclic-aromatic hydrocarbon (PAH) concentrations, alkylated aromatic concentrations, and concentrations of aliphatic and aromatic fractions. It was found that there was at least an order-of-magnitude variation in all properties measured between the eleven coal tars. Additionally, two coal tars obtained from the same manufactured gas plant site had very different properties, highlighting that there can be wide variations in coal tar properties from different samples obtained from the same site. Similarities were also observed between the coal tars. The relative chemical distributions were similar for all coal tars, and the coal tars predominantly consisted of PAHs, with naphthalene being the single-most prevalent compound. The C{sub 9-22} aromatic fraction, an indicator of all PAHs up to a molecular weight of approximately 276 g mole{sup -1}, showed a strong power-law relationship with the coal tar average molecular weight (MWct). And the concentrations of individual PAHs decreased linearly as MWct increased up to ca. 1000 g mole{sup -1}, above which they remained low and variable. Implications of these properties and their variation with MWct on groundwater quality are discussed. Ultimately, while these similarities do allow generalities to be made about coal tars, the wide range of coal tar bulk and chemical properties reported here highlights the complex nature of coal tars.

Biochemical studies on the effect of fluoride on higher plants. I. Metabolism of carbohydrates, organic acids and amino acids. [Glycine max var. Hawkeye

Energy Technology Data Exchange (ETDEWEB)

Yang, S F; Miller, G W

1963-01-01

Metabolic processes associated with free sugars, organic acids and amino acids in higher plants subjected to fluoride fumigation were studied quantitatively. Fluoride-fumigated leaves contained more reducing sugars and less sucrose than the normal leaves. This result suggested inhibition of sucrose synthesis by fluoride. Necrotic leaves contained increased total concentrations of organic acids, which were mostly attributable to malic acid, malonic acid and citric acid. The greater increase in malic acid relative to that of citric acid was the reverse of results observed in chlorotic tissue. Necrotic leaves contained enhanced amounts of free amino acids. The greatest increase occurred in the concentration of asparagine and might be related to the increased respiratory rate of necrotic leaves. Pipecolic acid accumulated in large quantities in nicrotic tissue and was not detected in normal leaves. The accumulation of organic acids and amino acids in leaves during fluoride fumigation was evidenced by a lowered respiratory quotient.

Construction of Kashiwazaki-Kariwa Nuclear Power Station Results of manufacturing concrete

International Nuclear Information System (INIS)

Morishita, Hideki; Tsuchiya, Yoshimasa; Eguchi, Kiyoshi; Hosaka, Hiroshi

1998-01-01

The construction of Kashiwazaki-Kariwa Nuclear Power Station of Tokyo Electric Power Co., Inc. was completed in July, 1997. Seven nuclear power plants generate about 8.2 million kW, and it is the largest nuclear power station in the world. In the construction, from May, 1980 to August, 1996, the concrete of 2.42 million m 3 for architecture and 1.04 million m 3 for civil engineering, 3.46 million m 3 in total, and the mortar for artificial rock bed of 430,000 m 3 were manufactured and placed. The results of manufacturing concrete from beginning to finish are shown. The specification of concrete was different for No. 1 plant, No. 2 and 5 plants, No. 3 and 4 plants and No. 6 and 7 plants. As to the mixing of concrete, the specification and the materials used are reported. The features of the facilities for manufacturing concrete are explained. The flowchart of the quality control of materials and concrete is shown. The material testing of cement and aggregate, the test of water quality and the material testing of admixtures were carried out. As for concrete, the weight of unit volume, slump, air quantity, concrete temperature, chloride content, strength and alkali reactivity were examined. (K.I.)

How does the European market of manufacturing plants develop?; Wie wird sich der europaeische Anlagenmarkt entwickeln?

Energy Technology Data Exchange (ETDEWEB)

Mederle, A. [Thoeni Industriebetriebe GmbH, Telfs (Austria)

2007-07-01

Within the scope of the 3rd symposium ''Processes and materials for energy technologies'', held between 20th and 21st June, 2007, at the ATZ Entwicklungszentrum in Sulzbach-Rosenberg (Federal Republic of Germany), the author reports on the development of the European market of manufacturing plants. The industrial plant constructors supply production plants in more than twenty industrial sectors such as chemical and pharmaceutical industry, textile industry or food processing industry. The industrial plant constructors have special qualities in project management, risk management, design of international contracts, management of supplier, logistics, After Sales Service, guarantee management as well as warranty management. The mechanical engineering and power plant engineering is one of the greatest industrial sector in the European Union. Nearly one tenth of the added value in the European Union is due to the mechanical engineering and power plant engineering. Nearly 24.500 companies are active in the mechanical engineering sector in the European Union. 2.6 million employees have an employment in this sector. They have produced machines and plants with an order value of 420 billion Euro in the year 2005. Two thirds of the production volume remain in the European Union. Only one third of the produced machines and plants are exported in countries outside of the European Union. The export volume amounts 146 billion Euro in the year 2005 and is greater than the export volume of the United States of America (70 billion Euro) and Japan (69 billion Euro). The Federal Republic of Germany is the leading country with respect to the local content of production (39 %) within the European Union followed by Italy (16 %), France (11 %), and Great Britain (9 %). Since the beginning of the nineties in the twentieth century, the conveying technology has developed to the greatest sector in the mechanical engineering. In this sector, the production volume amounts

From Conventional Lewis Acids to Heterogeneous Montmorillonite K10: Eco-Friendly Plant-Based Catalysts Used as Green Lewis Acids.

Science.gov (United States)

Hechelski, Marie; Ghinet, Alina; Louvel, Brice; Dufrénoy, Pierrick; Rigo, Benoît; Daïch, Adam; Waterlot, Christophe

2018-04-25

The concept of green chemistry began in the USA in the 1990s. Since the publication of the 12 principles of this concept, many reactions in organic chemistry have been developed, and chemical products have been synthesized under environmentally friendly conditions. Lewis acid mediated synthetic transformations are by far the most numerous and best studied. However, the use of certain Lewis acids may cause risks to environmental and human health. This Review discusses the evolution of Lewis acid catalyzed reactions from a homogeneous liquid phase to the solid phase to yield the expected organic molecules under green, safe conditions. In particular, recent developments and applications of biosourced catalysts from plants are highlighted. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Regulations and guidelines from the manufacturers' point of view

International Nuclear Information System (INIS)

Orth, K.H.

1977-01-01

Work on regulations and guidelines is a prerequisite for a better utilization of capacities, for improvements with regard to the licensing procedure and for a more efficient use of the available potential of engineers at the manufacturers' side who, freed from routine tasks, might be charged with further improving the safety of plants. Regulations and guidelines enable a shortening of the planning and building time, an employment of well-tried techniques and directions, multiple use of manufacturing documents, a reduction of the risks to be met in the planning, construction and start-up phases. They enable mass-production of components to be finished at a fixed date, a standardized operation manual and standardized staff training. Cooperation of nuclear power plant manufacturers in drawing up regulations and guidelines is thus not only an issue for the present, but also an investment for the future. (orig./HP) [de

Antagonism between salicylic and abscisic acid reflects early host-pathogen conflict and moulds plant defence responses.

Science.gov (United States)

de Torres Zabala, Marta; Bennett, Mark H; Truman, William H; Grant, Murray R

2009-08-01

The importance of phytohormone balance is increasingly recognized as central to the outcome of plant-pathogen interactions. Recently it has been demonstrated that abscisic acid signalling pathways are utilized by the bacterial phytopathogen Pseudomonas syringae to promote pathogenesis. In this study, we examined the dynamics, inter-relationship and impact of three key acidic phytohormones, salicylic acid, abscisic acid and jasmonic acid, and the bacterial virulence factor, coronatine, during progression of P. syringae infection of Arabidopsis thaliana. We show that levels of SA and ABA, but not JA, appear to play important early roles in determining the outcome of the infection process. SA is required in order to mount a full innate immune responses, while bacterial effectors act rapidly to activate ABA biosynthesis. ABA suppresses inducible innate immune responses by down-regulating SA biosynthesis and SA-mediated defences. Mutant analyses indicated that endogenous ABA levels represent an important reservoir that is necessary for effector suppression of plant-inducible innate defence responses and SA synthesis prior to subsequent pathogen-induced increases in ABA. Enhanced susceptibility due to loss of SA-mediated basal resistance is epistatically dominant over acquired resistance due to ABA deficiency, although ABA also contributes to symptom development. We conclude that pathogen-modulated ABA signalling rapidly antagonizes SA-mediated defences. We predict that hormonal perturbations, either induced or as a result of environmental stress, have a marked impact on pathological outcomes, and we provide a mechanistic basis for understanding priming events in plant defence.

76 FR 64010 - Special Rules Governing Certain Information Obtained Under the Clean Air Act: Technical Correction

Science.gov (United States)

2011-10-17

... Indian Country. Adipic Acid Production 325199 Adipic acid manufacturing facilities. Aluminum Production 331312 Primary Aluminum production facilities. Ammonia Manufacturing 325311 Anhydrous and aqueous ammonia manufacturing facilities. Cement Production 327310 Portland Cement manufacturing plants. Electronics...

Autonomously Self-Adhesive Hydrogels as Building Blocks for Additive Manufacturing.

Science.gov (United States)

Deng, Xudong; Attalla, Rana; Sadowski, Lukas P; Chen, Mengsu; Majcher, Michael J; Urosev, Ivan; Yin, Da-Chuan; Selvaganapathy, P Ravi; Filipe, Carlos D M; Hoare, Todd

2018-01-08

We report a simple method of preparing autonomous and rapid self-adhesive hydrogels and their use as building blocks for additive manufacturing of functional tissue scaffolds. Dynamic cross-linking between 2-aminophenylboronic acid-functionalized hyaluronic acid and poly(vinyl alcohol) yields hydrogels that recover their mechanical integrity within 1 min after cutting or shear under both neutral and acidic pH conditions. Incorporation of this hydrogel in an interpenetrating calcium-alginate network results in an interfacially stiffer but still rapidly self-adhesive hydrogel that can be assembled into hollow perfusion channels by simple contact additive manufacturing within minutes. Such channels withstand fluid perfusion while retaining their dimensions and support endothelial cell growth and proliferation, providing a simple and modular route to produce customized cell scaffolds.

Relationships between the daily intake of unsaturated plant lipids and the contents of major milk fatty acids in dairy goats

Energy Technology Data Exchange (ETDEWEB)

Martínez Marín, A.L.; Núñez Sánchez, N.; Garzón Sigler, A. I.; Peña Blanco, F.; Fuente, M.A. de la

2015-07-01

A meta-regression of the effects of the amount of plant lipids consumed by dairy goats on the contents of some milk fat fatty acids (FA) was carried out. Fourteen peer-reviewed published papers reporting 17 experiments were used in the study. Those experiments compared control diets without added fat with diets that included plant lipids rich in unsaturated FA, summing up to 64 treatments. The results showed that increasing daily intake of plant lipids linearly reduced the contents of all medium chain saturated FA in milk fat. Moreover, it was observed that the longer the chain of the milk saturated FA, the greater the negative effect of the plant lipid intake on their contents. On the other hand, the contents of stearic acid and the sum of oleic, linoleic and α-linolenic acids in milk fat linearly increased as daily plant lipid intake rose. The results obtained corroborate previous reports on the effects of feeding dairy goats with increasing amounts of unsaturated plant lipids on milk FA profile. (Author)

Application of a precipitation method for uranium recovery from Abu-Zaabal phosphoric acid plant, egypt

International Nuclear Information System (INIS)

El-Hazek, N.M.T.; Hussein, E.M.

1997-01-01

Current industrial recovery of uranium from 30% phosphoric acid-produced by the dihydrate process-is based on solvent extraction method. Uranium recovery from concentrated phosphoric acid (45-52% P 2 O 5 ) produced by evaporation of the 30% acid or directly produced by the hemihydrate process, by solvent extraction is difficult to apply in practice. In addition to possible contamination of the acid by the organic solvents and/or their deterioration. This paper investigates the possibility of applying a precipitation method (Weterings and Janssen, 1985) for uranium recovery from both low (28% P 2 O 2 ) and high (48% P 2 O 5 ) concentration phosphoric acids produced by abu-Zaabal phosphoric acid plant (abu-Zaabal fertilizers and chemicals Co., Egypt). The 28% acid produced by H 2 SO 4 dihydrate method and the 48% acid produced by evaporation of the 28% acid

The Dynamics of Embolism Refilling in Abscisic Acid (ABA-Deficient Tomato Plants

Directory of Open Access Journals (Sweden)

Francesca Secchi

2012-12-01

Full Text Available Plants are in danger of embolism formation in xylem vessels when the balance between water transport capacity and transpirational demand is compromised. To maintain this delicate balance, plants must regulate the rate of transpiration and, if necessary, restore water transport in embolized vessels. Abscisic acid (ABA is the dominant long-distance signal responsible for plant response to stress, and it is possible that it plays a role in the embolism/refilling cycle. To test this idea, a temporal analysis of embolism and refilling dynamics, transpiration rate and starch content was performed on ABA-deficient mutant tomato plants. ABA-deficient mutants were more vulnerable to embolism formation than wild-type plants, and application of exogenous ABA had no effect on vulnerability. However, mutant plants treated with exogenous ABA had lower stomatal conductance and reduced starch content in the xylem parenchyma cells. The lower starch content could have an indirect effect on the plant’s refilling activity. The results confirm that plants with high starch content (moderately stressed mutant plants were more likely to recover from loss of water transport capacity than plants with low starch content (mutant plants with application of exogenous ABA or plants experiencing severe water stress. This study demonstrates that ABA most likely does not play any direct role in embolism refilling, but through the modulation of carbohydrate content, it could influence the plant’s capacity for refilling.

Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

Energy Technology Data Exchange (ETDEWEB)

Yamada, Shin

1999-05-05

Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

Molecular analysis of manufactured gas plant soils for naphthalene mineralization

International Nuclear Information System (INIS)

Sanseverino, J.; Werner, C.; Fleming, J.; Applegate, B.M.; King, J.M.H.; Sayler, G.S.; Blackburn, J.

1991-01-01

New molecular tools are being developed and tested to ascertain the biodegradability of hazardous wastes by soil bacterial population. The potential for manufactured gas plant (MGP) soil bacterial populations to degrade naphthalene, as a component mixture of polynuclear aromatic hydrocarbons, was evaluated by the detection of a naphthalene biodegradative genotype by DNA probe hybridization with DNA extracts and colonies of cultured bacteria of the MGP soils. The activity of the naphthalene-degrading populations was evaluated by mineralization assays, 14 CO 2 production from 14 C-naphthalene. Direct messenger RNA (mRNA) extraction from MGP soil was evaluated as an instantaneous measure of naphthalene catabolic gene expression in MGP soil. The bioavailability of naphthalene for bacterial degradation within the MGP soils was assessed by measuring the bioluminescent response of a naphthalene-lux catabolic reporter strain Pseudomonas fluorescens HK44 (pUTK21). DNA extracted from 5 MGP soils and 1 creosote-contaminated soil and hybridized with a nahA gene probe indicated that the naphthalene degradative genes were present in all samples in the range of 0.06 to 0.95 ng/100 μl DNA extract which was calculated to represent 3.58 x 10 8 to 1.05 x 10 10 nahA positive cells/g soil. Phenanthrene, anthracene, and benzo(a)pyrene were mineralized also by some of the soils. NAH7 homologous messenger RNA transcripts were detectable in one MGP soil and in the creosote-contaminated soil

Fate of trivalent chromium in presence of organic acids - a hydroponic study on soyabean plant using radiotracer

International Nuclear Information System (INIS)

Srivastava, Sonal; Prakash, Satya; Srivastava, M.M.

1999-01-01

Hydroponic experiments have been conducted to examine the uptake and translocation of root absorbed trivalent chromium in the presence of organic acid supplementation. Statistically significant increase in chromium accumulation in various plant tissues with increasing concentration of organic acids has been observed. Potentiality of organic acids to form labile organically bound Cr III is explored. (author)

Physiological control of the distribution of translocated amino acids and amides in young soybean plants

Energy Technology Data Exchange (ETDEWEB)

Nelson, C D; Gorham, P R

1959-01-01

Each of 10 C/sup 14/-labelled amino acids or amides was introduced into young soybean plants through the cut petiole of one primary leaf. The compounds used were asparagine, glutamine, urea, aspartic acid, glutamic acid, glycine, serine, alanine, norleucine, and arginine. The rates of uptake of all the solutions except arginine were in the range 1.0 to 1.5 ..mu..l per minute. After 1 to 5 minutes, the distribution of C/sup 14/ throughout the plants was determined. Each amino acid was translocated as such without conversion to other compounds. From the point of introduction, translocation of each amino acid or amide was mainly downward toward the root; very little was translocated upward. The amount of asparagine or glutamine that was translocated into the primary leaf opposite the cut petiole increased as the leaf aged, while the amount of the other eight compounds decreased as the leaf aged. When asparagine and serine were administered together, serine moved into the young primary leaf while asparagine was excluded. Both excision of the roots and chilling the roots decreased the velocity of downward translocation of aspartic acid indicating that the roots exert a strong demand which favors translocation in a downward direction more than an upward direction in the stem. 17 references, 1 figure, 5 tables.

The manufacturing of Stress Corrosion Crack (SCC) on Inconel 600 tube

International Nuclear Information System (INIS)

Bae, Seunggi; Bak, Jaewoong; Kim, Seongcheol; Lee, Sangyul; Lee, Boyoung

2014-01-01

The Stress Corrosion Crack (SCC), taken a center stage in recently accidents about nuclear power plants, is one of the environmentally induced cracking occurred when a metallic structure under tensile stress is exposed to corrosive environment. In this study, the SCC was manufactured in the simulated corrosive environmental conditions on Inconel 600 tube that widely applied in the nuclear power plants. The tensile stress which is one of the main factors to induce SCC was given by GTAW welding in the inner surface of the specimen. The corrosive environment was simulated by using the sodium hydroxide (NaOH) and sodium sulfide (Na 2 S). In this study, SCC was manufactured in the simulated corrosive environmental conditions with Inconel 600 tube that widely applied in the nuclear power plants. 1) The SCC was manufactured on Inconel 600 tube in simulated operational environments of nuclear power plants. In the experiment, the welding heat input which is enough to induce the cracking generated the SCC near the welding bead. So, in order to prevent the SCC, the residual stress on structure should be relaxed. 2) The branch-type cracking was detected

Foreign Workers, Foreign Multinationals, and Wages by Occupation and Sex in Malaysia’s Manufacturing Plants during the mid-1990s

OpenAIRE

Eric D. , Ramstetter

2016-01-01

This paper investigates the effects of foreign worker shares and MNE ownership on wages paid to males and female in five occupation groups in Malaysian manufacturing plants during 1994-1996, an important period coinciding with the end of the decade-long economic boom that preceded the Asian financial crisis. Random effects estimates of Mincer-type equations by occupation group and sex in large samples of all industries and in seven industry-level samples both suggest that use of foreign worke...

UK manufacturers construction joint venture

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This report examines the legal and commercial framework for UK manufacturers to collaborate in a construction venture for a small combustion/steam cycle power plant fueled with biomass. The integration of technology and project plan, the working capital and capitalisation, financial aspects, the market plan, turnkey packages, joint venture entities, and collaboration are discussed. (UK)

Determination of oil and fatty acids concentration in seeds of coastal halophytic Sueada aegyptica plant

Directory of Open Access Journals (Sweden)

Tahereh Assadi

2013-04-01

Full Text Available Background: Suaeda aegyptica (S. aegyptica species belong to the Chenepodiaceae family, the second largest family in the world of plants kingdom. It is indigenous to arid and semi-arid regions of the world and salty coastal zones Persian Gulf of Iran. It is an annual succulent halophyte plant which is characterized by producing oily seeds, high growth rate and large number of biomass. The aim of this study was analysis and determination of oil and fatty acids concentration in the S. aegyptica seed. Material and Methods: The seeds of S. aegyptica were collected form coastal zones of Persian Gulf in Bushehr province, washed and dried. The fatty acids content of the dried seeds were extracted in n-hexane solvent by soxhellet apparatus. The residue of n-hexane in oily phase was evaporated by rotary evaporator and remaining oil was collected for fatty acids analysis. In the presence of potassium hydroxide and BF3 by refluxing for 30 minutes, the methyl ester derivative of fatty acids were produced. Then the resulted derivatives were analyzed by gas chromatography (GC-FID. Results: The seeds of S. aegyptica contains eight fatty acids as: Pelargonic (C9, Capric (C10, Undecylic (C11, Tridecylic (C13, Myristic (C14, Palmitic (C16, Stearic (C18, Linoleic (18:2 and Linolenic (18:3. Average oil content in seeds 014/0 ± 87 / percent. Conclusion: The ratio of unsaturated fatty acids was higher than the saturated ones. Linoleic and Palmitic acids are major unsaturated and saturated fatty acids of S. aegyptica seed respectively.

Very-large-scale production of antibodies in plants: The biologization of manufacturing.

Science.gov (United States)

Buyel, J F; Twyman, R M; Fischer, R

2017-07-01

Gene technology has facilitated the biologization of manufacturing, i.e. the use and production of complex biological molecules and systems at an industrial scale. Monoclonal antibodies (mAbs) are currently the major class of biopharmaceutical products, but they are typically used to treat specific diseases which individually have comparably low incidences. The therapeutic potential of mAbs could also be used for more prevalent diseases, but this would require a massive increase in production capacity that could not be met by traditional fermenter systems. Here we outline the potential of plants to be used for the very-large-scale (VLS) production of biopharmaceutical proteins such as mAbs. We discuss the potential market sizes and their corresponding production capacities. We then consider available process technologies and scale-down models and how these can be used to develop VLS processes. Finally, we discuss which adaptations will likely be required for VLS production, lessons learned from existing cell culture-based processes and the food industry, and practical requirements for the implementation of a VLS process. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Acidity of vapor plume from cooling tower mixed with flue gases emitted from coal-fired power plant.

Science.gov (United States)

Hlawiczka, Stanislaw; Korszun, Katarzyna; Fudala, Janina

2016-06-01

Acidity of products resulting from the reaction of flue gas components emitted from a coal-fired power plant with water contained in a vapor plume from a wet cooling tower was analyzed in a close vicinity of a power plant (710 m from the stack and 315 m from the cooling tower). Samples of this mixture were collected using a precipitation funnel where components of the mixed plumes were discharged from the atmosphere with the rainfall. To identify situations when the precipitation occurred at the same time as the wind directed the mixed vapor and flue gas plumes above the precipitation funnel, an ultrasound anemometer designed for 3D measurements of the wind field located near the funnel was used. Precipitation samples of extremely high acidity were identified - about 5% of samples collected during 12 months showed the acidity below pH=3 and the lowest recorded pH was 1.4. During the measurement period the value of pH characterizing the background acidity of the precipitation was about 6. The main outcome of this study was to demonstrate a very high, and so far completely underestimated, potential of occurrence of episodes of extremely acid depositions in the immediate vicinity of a coal-fired power plant. Copyright © 2016 Elsevier B.V. All rights reserved.

Reconfigurability of behavioural specifications for manufacturing systems

Science.gov (United States)

Schmidt, Klaus Werner

2017-12-01

Reconfigurable manufacturing systems (RMS) support flexibility in the product variety and the configuration of the manufacturing system itself in order to enable quick adjustments to new products and production requirements. As a consequence, an essential feature of RMS is their ability to rapidly modify the control strategy during run-time. In this paper, the particular problem of changing the specified operation of a RMS, whose logical behaviour is modelled as a finite state automaton, is addressed. The notion of reconfigurability of specifications (RoS) is introduced and it is shown that the stated reconfiguration problem can be formulated as a controlled language convergence problem. In addition, algorithms for the verification of RoS and the construction of a reconfiguration supervisor are proposed. The supervisor is realised in a modular way which facilitates the extension by new configurations. Finally, it is shown that a supremal nonblocking and controllable strict subautomaton of the plant automaton that fulfils RoS exists in case RoS is violated for the plant automaton itself and an algorithm for the computation of this strict subautomaton is presented. The developed concepts and results are illustrated by a manufacturing cell example.

Preparation of Grinding Aid Using Waste Acid Residue from Plasticizer Plant

Science.gov (United States)

Li, Lingxiao; Feng, Yanchao; Liu, Manchao; Zhao, Fengqing

2017-09-01

The grinding aid for granulated blast-furnace slag were prepared from waste acid residue from plasticizer plant through neutralization, de-methanol and granulation process. In this process, sulfuric acid was transformed into gypsum which has much contribution for grinding effect by combined use with the glycerol and poly glycerin in the waste. Fly ash was used for granulation for the composite grinding aid. Methanol can be recycled in the process. The result showed that the suitable addition of grinding aid is 0.03 % of granulated blast-furnace slag (mass). In this case, the specific surface area is 14% higher than that of the blank. Compared with the common grinding aids, it has excellent performance and low cost.

Physicochemical characterization of cement kiln dust for potential reuse in acidic wastewater treatment

International Nuclear Information System (INIS)

Mackie, A.; Boilard, S.; Walsh, M.E.; Lake, C.B.

2010-01-01

Cement kiln dust (CKD) is a fine-grained material produced during the manufacture of cement. Current reuse options are limited and the bulk of CKD not reused in the cement manufacturing process is sent to landfills or stored on-site. Due to the calcium oxide (CaO) content of CKD, it has the potential to be used as a replacement for lime in treating acidic wastewaters such as acid rock drainage (ARD). This paper outlines the results of an examination of the physical and chemical properties of CKD samples collected from six cement plants. The CKD samples were analyzed for major oxides using X-ray diffraction (XRD), available lime, specific surface area, particle size, and morphology using scanning electron microscope (SEM) and compared with a commercial quicklime product. Conductivity, pH, and calcium concentrations of slaked CKD and quicklime solutions were used as indicators of reactivity of the CKD. Slaking of two of the CKD samples with the highest free lime contents (e.g., 34 and 37% free CaO) gave elevated pH values statistically comparable to those of the commercial quicklime sample that was characterized as having 87% available CaO. Acid neutralization trials indicate that even CKD samples with low free lime contents could be effective at neutralizing acidic wastewaters.

Injury done to vegetation by gases arising from certain manufacturing processes

Energy Technology Data Exchange (ETDEWEB)

Hamburger, S

1884-04-29

The question of damage done to vegetation by smoke and acid gases escaping from the chimneys of manufacturing establishments is comparatively of recent date, and complaints seem to have increased with the progress which industry has made in the last decades. Such complaints have principally been brought forward in districts where many manufactures were carried on, and the blame was always laid at the doors of chemical manufacturers, and especially the alkali makers, of whose works it was known that they gave rise to large quantities of acid gases. Lately this subject has been taken up by several unprejudiced investigators, and great credit is due to them for having shown that gases arising from other manufactures maybe equally noxious, and even more so. Much, however, still remains to be done in that direction. People somehow cling to their old belief, and every endeavor ought to be made to dispel that erroneous notion. That is the object of this paper.

Determination of the activity concentration of 230Th in phosphoric acids produced in Brazil

International Nuclear Information System (INIS)

Taddei, M.H.T.; Ferreira, M.T.; Fukuma, H.T.; Xavier, T.T.; Sousa, F.V.T.S.

2017-01-01

The high uranium phosphate rock from Itataia, Brazil, was processed using the wet route in the dihydrate system to manufacture phosphoric acid. The uranium contained in phosphoric acid was recovered by the solvent extraction technique. The distribution of the long half-life radionuclides from the decay series of 238 U and 232 Th were evaluated in these processes. The 26 Ra, 228 Ra and 210 Pb radionuclides were found predominantly in phosphogypsum, while the isotopes of 228 Th, 230 Th and 232 Th predominated in phosphoric acid after extracting uranium. The main concern in the commercialization of phosphoric acid that will be produced in the Itataia plant is in relation to the content of 230 Th. This work determined the content of these radionuclides in phosphoric acid from different locations in the country in order to compare

The manufacturers' viewpoint

International Nuclear Information System (INIS)

Davis, D.A.

1986-01-01

This paper describes the approach by six separate manufacturers to the problem of availability from their particular view point. This presentation demonstrates basic strategy: attention to high reliability at the design phase, based on positive and detailed feedback from existing plant; quality assurance at the production stage which has been planned into the production process in the form of a Q.A. manual in design; sophisticated test procedures and facilities; simplicity of design with high accuracy in production; provision of a clear operational maintenance manual, etc. The manufacturers agreed on the need to make a conscious commitment to design for high availability, taking into account both initial and ongoing operating costs in life cycle cost assessment. Predictability, reliability, maintainability, efficiency, market acceptability and maintenance support based on high quality feedback between operator and supplier were all stressed on the grounds that prevention is always better than cure

FY 1998 annual report on the CO{sub 2} reduction by 30 manufacturing companies (plants) through energy conservation. Thailand; Seizogyo 30 sha (kojo) no sho energy ni yoru CO{sub 2} haishutsuryo sakugen 1998 nendo chosa hokokusho. Taikoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project is aimed at energy-saving diagnosis of 30 energy-intensive manufacturing plants in Thailand, to draw the project plans and clarify, e.g., greenhouse effect gas reduction and cost-effectiveness effects, on the basis of transferring and applying the energy management and energy-saving equipment technologies now being used by the manufacturing sector in Japan. The 30 plants analyzed are 6 metal-related plants, 3 non-ferrous plants, 5 chemical plants, 6 ceramics plant, 4 textile plants, 4 food processing plants and 2 pulp plants. Two or more feasible energy-saving measures are studied for each plant. A total of 178 improvement measures (approximately 6 on the average for each plant) are identified as the ones related to energy-saving and operation controlling techniques. These measures could reduce CO2 emissions by 145,000 t/y from 1,370,000 t/y released from the 30 plants. The measures of high cost-effectiveness are (use of an appropriate pressure for air compressors) and (resting of transformers on non-working days). (NEDO)

77 FR 42367 - National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing...

Science.gov (United States)

2012-07-18

... and 63 National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing... Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry and Standards of... manufacturing plants. Federal government Not affected. State/local/tribal government.... Portland cement...

76 FR 2832 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

Science.gov (United States)

2011-01-18

... Cement Manufacturing Industry and Standards of Performance for Portland Cement Plants AGENCY...) from the Portland Cement Manufacturing Industry and Standards of Performance (NSPS) for Portland Cement... Standards for Hazardous Air Pollutant From the Portland Cement Manufacturing Industry Docket, Docket ID No...

Manufacture of fuel and fuel channels and their performance in Indian PHWRS - an overview

International Nuclear Information System (INIS)

Kalidas, R.

2005-01-01

Nuclear Fuel Complex (NFC) at Hyderabad is a conglomeration of chemical, metallurgical and mechanical plants, processing uranium and zirconium in two separate streams and culminating in the fuel assembly plant. Apart from manufacturing fuel for Pressurised Heavy Water Reactors (PHWRs) and Boiling Water Reactors (BWRs), NFC is also engaged in the manufacture of reactor core structurals for these reactors. NFC has carried out several technological developments over the years and implemented them for the manufacture of fuel, calandria tubes and pressure tubes for PHWRs. Keeping in pace with the Nuclear Power Programme envisaged by the Department of Atomic Energy, NFC had augmented its production capacities in all these areas. The paper highlights several actions initiated in the areas of fuel design, fuel manufacturing, manufacturing of zirconium alloy core structurals, fuel clad tubes and components and their performance in Indian PHWRs. (author)

Utilization of hydrochloric acid wastes of titanium-magnesium plants for reprocessing of rare earth mineral raw material

International Nuclear Information System (INIS)

Nikonov, V.N.; Troyanker, L.S.; Mikhlin, E.B.

1979-01-01

The possibility of using hydrochloric acid wastes of gas purifying plants in rare earth production is studied in laboratory conditions. It is shown that during sorption leaching of a rare earth product using the KU-2X8 cationite instead the reactive hydrochloric acid one may use hydrochloric acid wastes; rare earth element and yttrium extraction in both cases is identical

Hexanoic Acid Treatment Prevents Systemic MNSV Movement in Cucumis melo Plants by Priming Callose Deposition Correlating SA and OPDA Accumulation

Directory of Open Access Journals (Sweden)

Emma Fernández-Crespo

2017-10-01

Full Text Available Unlike fungal and bacterial diseases, no direct method is available to control viral diseases. The use of resistance-inducing compounds can be an alternative strategy for plant viruses. Here we studied the basal response of melon to Melon necrotic spot virus (MNSV and demonstrated the efficacy of hexanoic acid (Hx priming, which prevents the virus from systemically spreading. We analysed callose deposition and the hormonal profile and gene expression at the whole plant level. This allowed us to determine hormonal homeostasis in the melon roots, cotyledons, hypocotyls, stems and leaves involved in basal and hexanoic acid-induced resistance (Hx-IR to MNSV. Our data indicate important roles of salicylic acid (SA, 12-oxo-phytodienoic acid (OPDA, jasmonic-isoleucine, and ferulic acid in both responses to MNSV. The hormonal and metabolites balance, depending on the time and location associated with basal and Hx-IR, demonstrated the reprogramming of plant metabolism in MNSV-inoculated plants. The treatment with both SA and OPDA prior to virus infection significantly reduced MNSV systemic movement by inducing callose deposition. This demonstrates their relevance in Hx-IR against MNSV and a high correlation with callose deposition. Our data also provide valuable evidence to unravel priming mechanisms by natural compounds.

Potential risks of effluent from acid mine drainage treatment plants at abandoned coal mines.

Science.gov (United States)

Seo, Jaehwan; Kang, Sung-Wook; Ji, Wonhyun; Jo, Hun-Je; Jung, Jinho

2012-06-01

The lethal and sublethal toxicity of effluent from three acid mine drainage treatment plants were monitored from August 2009 to April 2010 using Daphnia magna (reference species) and Moina macrocopa (indigenous species). Acute lethal toxicity was observed in Samma effluent due to incomplete neutralization of acid mine drainages by the successive alkalinity producing system (SAPS). Additionally, there was no significant difference in toxicity values (TU) between D. magna and M. macrocopa (p water bodies.

Metabolic engineering of the omega-3 long chain polyunsaturated fatty acid biosynthetic pathway into transgenic plants.

Science.gov (United States)

Ruiz-López, Noemi; Sayanova, Olga; Napier, Johnathan A; Haslam, Richard P

2012-04-01

Omega-3 (ω-3) very long chain polyunsaturated fatty acids (VLC-PUFAs) such as eicosapentaenoic acid (EPA; 20:5 Δ5,8,11,14,17) and docosahexaenoic acid (DHA; 22:6 Δ4,7,10,13,16,19) have been shown to have significant roles in human health. Currently the primary dietary source of these fatty acids are marine fish; however, the increasing demand for fish and fish oil (in particular the expansion of the aquaculture industry) is placing enormous pressure on diminishing marine stocks. Such overfishing and concerns related to pollution in the marine environment have directed research towards the development of a viable alternative sustainable source of VLC-PUFAs. As a result, the last decade has seen many genes encoding the primary VLC-PUFA biosynthetic activities identified and characterized. This has allowed the reconstitution of the VLC-PUFA biosynthetic pathway in oilseed crops, producing transgenic plants engineered to accumulate ω-3 VLC-PUFAs at levels approaching those found in native marine organisms. Moreover, as a result of these engineering activities, knowledge of the fundamental processes surrounding acyl exchange and lipid remodelling has progressed. The application of new technologies, for example lipidomics and next-generation sequencing, is providing a better understanding of seed oil biosynthesis and opportunities for increasing the production of unusual fatty acids. Certainly, it is now possible to modify the composition of plant oils successfully, and, in this review, the most recent developments in this field and the challenges of producing VLC-PUFAs in the seed oil of higher plants will be described.

Development of polymer catalyst manufacturing technology

International Nuclear Information System (INIS)

Chung, Heung Seok; Kim, Yong Ik; Lee, Han Soo; Kang, Hui Seok; Seong, Ki Ung; Na, Jeong Won; An, Do Hui; Kim, Kwang Rak; Cho, Young Hyeon; Baek, Seung Uh; Jeong, Yong Won

1993-01-01

Heavy water is used as moderator and coolant in Pressurized Heavy Water Power Plants. According to the governmental long-term plan for power supply, Korea is scheduled to construct new six pressurized heavy water power plants till the year 2006. Total heavy water demand for these plants would be 3892 Mg during the period 1992-2006. Reformed hydrogen processes are considered best suited to Korea. Hydrophobic catalysts for this process were manufactured and the performance of hydrogen isotope exchance was investigated. The overall mass transfer coefficients varied between 0.004 and 2.295 m 3 HD/m 3 Bed.sec. and heavy water separation processes using the catalysts were optimized. (Author)

Hexanoic acid protects tomato plants against Botrytis cinerea by priming defence responses and reducing oxidative stress.

Science.gov (United States)

Finiti, Ivan; de la O Leyva, María; Vicedo, Begonya; Gómez-Pastor, Rocío; López-Cruz, Jaime; García-Agustín, Pilar; Real, Maria Dolores; González-Bosch, Carmen

2014-08-01

Treatment with the resistance priming inducer hexanoic acid (Hx) protects tomato plants from Botrytis cinerea by activating defence responses. To investigate the molecular mechanisms underlying hexanoic acid-induced resistance (Hx-IR), we compared the expression profiles of three different conditions: Botrytis-infected plants (Inf), Hx-treated plants (Hx) and Hx-treated + infected plants (Hx+Inf). The microarray analysis at 24 h post-inoculation showed that Hx and Hx+Inf plants exhibited the differential expression and priming of many Botrytis-induced genes. Interestingly, we found that the activation by Hx of other genes was not altered by the fungus at this time point. These genes may be considered to be specific targets of the Hx priming effect and may help to elucidate its mechanisms of action. It is noteworthy that, in Hx and Hx+Inf plants, there was up-regulation of proteinase inhibitor genes, DNA-binding factors, enzymes involved in plant hormone signalling and synthesis, and, remarkably, the genes involved in oxidative stress. Given the relevance of the oxidative burst occurring in plant-pathogen interactions, the effect of Hx on this process was studied in depth. We showed by specific staining that reactive oxygen species (ROS) accumulation in Hx+Inf plants was reduced and more restricted around infection sites. In addition, these plants showed higher ratios of reduced to oxidized glutathione and ascorbate, and normal levels of antioxidant activities. The results obtained indicate that Hx protects tomato plants from B. cinerea by regulating and priming Botrytis-specific and non-specific genes, preventing the harmful effects of oxidative stress produced by infection. © 2013 BSPP AND JOHN WILEY & SONS LTD.

A pilot plant for solar-cell manufacture; Ligne pilote de fabrication de cellules solaires

Energy Technology Data Exchange (ETDEWEB)

Fischer, D.; Ziegler, Y.; Closset, A. [VHF - Technologies SA, Yverdon-les-Bains (Switzerland)

2005-07-01

A pilot plant for the manufacture of amorphous silicon solar cells on plastic film substrate was built allowing the annual production of 40 kW peak power. The production steps comprise: a) the continuous coating of n-i-p solar cells by VHF-PECVD with a capacity of 28.5 meters in 8.5 hours; b) transparent-conducting-oxide (TCO) top contact structuring using a continuous process; c) series connection step (scribing and Ag-paste) with a capacity of 28 meters in 6 hours; d) back and top contact sputtering with 3 parallel magnetrons; e) integration of a large-area vacuum laminator enabling the simultaneous lamination of 4 products of 4 Wp. In parallel with this project, a complete cost model was established enabling a more quantitative approach of the future technological and industrial strategy of the company. An increase of the capacity to 100 kWp has been planned for summer 2005.

Ferulic Acid, But Not All Hydroxycinnamic Acids, Is a Novel T3SS Inducer of Ralstonia solanacearum and Promotes Its Infection Process in Host Plants under Hydroponic Condition

Directory of Open Access Journals (Sweden)

Yong Zhang

2017-09-01

Full Text Available Hydroxycinnamic acids (HCAs are typical monocyclic phenylpropanoids, including cinnamic acid (Cin, coumaric acid (Cou, caffeic acid (Caf, ferulic acid (FA and their isomers, and involved in the interactions between pathogens and host plants. Here, we focused on the impact of HCAs on expression of type III secretion system (T3SS in Ralstonia solanacearum. FA significantly induced the expression of the T3SS and some type III effectors (T3Es genes in hrp-inducing medium, while did not the other HCAs. However, exogenously supplemented FA did not affect the T3SS expression in planta and the elicitation of the hypersensitive response (HR in tobacco leaves. Consistent with its central roles in pathogenicity, the FA-induced expression of the T3SS led to significant promotion on infection process of R. solanacearum in tomato plants under hydroponics cultivation. Moreover, the FA-induced expression of the T3SS was specifically mediated by the well-characterized signaling cascade PrhA-prhI/R-PrhJ-HrpG-HrpB, independent of the other known regulatory pathways. In summary, our results demonstrated that FA, a novel inducer of the T3SS in R. solanacearum, was able to promote its infection process in host plants under hydroponics condition.

Perspectives on traceability in food manufacture

DEFF Research Database (Denmark)

Moe, Tina

1998-01-01

Traceability in food manufacturing can range from in-house traceability in production plants to traceability in whole or part of the production chain from raw material to consumer, and descriptors of the product and its history can be few or many as decided. Well thought-out traceability systems...

Waste acid/metal solution reduction and recovery by vacuum distillation

International Nuclear Information System (INIS)

Jones, E.O.; Wilcox, W.A.; Johnson, N.T.; Bowdish, F.W.

1995-01-01

Processes involving distillation under reduced pressure were developed at the Pacific Northwest Laboratory several years ago to recover spent acid solutions generated during the manufacture of nuclear fuel for the N-Reactor at the Hanford site. Following construction and testing of a pilot-plant, the technology was licensed to Viatec Recovery Systems, Inc. for commercialization. The technology developed included specialized distillation and rectification of volatile acids, removal of water and/or volatile acid from sulfuric acid, and precipitation of salts. A key feature of the Waste Acid Detoxification and Reclamation (WADR) technology is the development and use of advanced thermoplastic and fluoropolymer materials of construction in all critical process equipment. The technology was then expanded to include crystallization to recover metal salts for possible reuse. Economic and environmental advantages of the procedures include recovery of acids for reuse, simplification or elimination of the disposal of waste solutions, and possible recovery of metals. Industries expected to benefit from such applications include galvanizing, electroplating, sand leaching and any where metals are cleaned in acid solutions. Currently a modular system has been assembled for recovery of several different spent acid solutions

Effects of rare earth and acid rain pollution on plant chloroplast ATP synthase and element contents at different growth stages.

Science.gov (United States)

Zhang, Fan; Hu, Huiqing; Wang, Lihong; Zhou, Qing; Huang, Xiaohua

2018-03-01

Combined rare earth and acid rain pollution has become a new environmental problem, seriously affecting plant survival. The effects of these two kinds of pollutants on plant photosynthesis have been reported, but the micro mechanisms are not very clear. In this research, we studied the effects of lanthanum [La(III), 0.08, 1.20 and 2.40 mM] and acid rain (pH value = 2.5, 3.5 and 4.5) on the ATPase activity and gene transcription level and the functional element contents in rice leaf chloroplasts. The results showed that the combined 0.08 mM La(III) and pH 4.5 acid rain increased the ATPase activity and gene transcription level as well as contents of some functional elements. But other combined treatments of acid rain and La(III) reduced the ATPase activity and gene transcription level as well as functional element contents. The change magnitude of the above indexes at rice booting stage was greater than that in seedling stage or grain filling stage. These results reveal that effects of La(III) and acid rain on ATPase activity and functional element contents in rice leaf chloroplasts are related to the combination of La(III) dose and acid rain intensity and the plant growth stage. In addition, the changes in the ATPase activity were related to ATPase gene transcription level. This study would provide a reference for understanding the microcosmic mechanism of rare earth and acid rain pollution on plant photosynthesis and contribute to evaluate the possible environmental risks associated with combined La(III) and acid rain pollution. The effects of La(III) and acid rain on activity and gene transcription level of rice chloroplast ATPase and contents of functional elements were different at different growth stages. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of Salicylic acid on some Growth and Biochemical Parameters of Wheat and Maize Plants under Salt Stress in Vitro

Directory of Open Access Journals (Sweden)

Z. Dashagha

2014-04-01

Full Text Available In this study, the difference between the resistance of wheat plants (c3 and maize (c4 the salinity was investigated. Research on environmental stresses (Hakimi, 2008 show thatstresses are considered as Limiting factors in crop production.and some phenolic compounds such as salicylic acid are used to improve or alleviate the negative effects of stress. In this study, plants were grown in plastic pots and the plants treated with salicylic acid, after two weeks and seven days later salinity was exerted.The effect of salinity treatmenton both plants, for some morphological and biochemical characteristics were studied. In biochemical tests, lipid peroxidation under salinity and salicylic acid treatments has increased for weat which represents the effect of salinity on the plant and the activetion of the defense mechanism, Howweverthese factors have reduced formaize. Moreover, the increase in total chlorophyll and flavonoids in wheatchlorophyll in wheat and maize shows the role of these pigments in quenching hydrogen peroxide and other active Oxygen types. This increases has not been concideralle in maize. The effect of treatment on the weight of … and root of both plants differed under the investigated concentration.

76 FR 2860 - National Emission Standards for Hazardous Air Pollutants From the Portland Cement Manufacturing...

Science.gov (United States)

2011-01-18