33 CFR 147.847 - Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone.

Science.gov (United States)

2010-07-01

... Production, Storage, and Offloading System Safety Zone. 147.847 Section 147.847 Navigation and Navigable... ZONES § 147.847 Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone. (a) Description. The BW PIONEER, a Floating Production, Storage and Offloading (FPSO) system, is in...

Behavioral based safety approaches

International Nuclear Information System (INIS)

Maria Michael Raj, I.

2009-01-01

Approach towards the establishment of positive safety culture at Heavy Water Plant, Tuticorin includes the adoption of several important methodologies focused on human behavior and culminates with achievement of Total Safety Culture where Quality and Productivity are integrated with Safety

Safety policy in the production of electricity

International Nuclear Information System (INIS)

Siddall, E.

1983-01-01

When safety is properly understood, defined and quantified, it can be seen that the development of our present industrial civilization has resulted in a progressive and great improvement in human safety which is still continuing. Increased safety has come with increased wealth in such close association that a high degree of cause-and-effect relationship must be considered. The quantitative relationship between wealth production and safety improvement is derived from different sources of evidence. When this is applied to the wealth production from electricity generation in a standard module of population in an advanced society, a safety benefit is indicated which exceeds the assessed direct risk associated with the electricity generation by orders of magnitude. It appears that a goal or policy intended to confer the greatest safety benefit to the population would result in attitudes and actions diametrically opposite to those which are conventional at the moment

Management present situation and countermeasures of coal mines safety in production

Institute of Scientific and Technical Information of China (English)

ZHANG Shu-dong; YU Chang-wu

2008-01-01

Analyzed of the present situation of Chinese coal mines safety in production and the reasons for coal mining accident, and realized the coal mines safety in production,which should increase the legal safeguards of coal mine safety in production, and safety input, established the comprehensive coal mine safety evaluation system, comprehensively enhance quality of coal mine workers, established and improved early warning mechanism of safety production of coal mine.

Regulatory requirements for demonstration of the achieved safety level at the Mochovce NPP before commissioning

International Nuclear Information System (INIS)

Lipar, M.

1997-01-01

A review of regulatory requirements for demonstration of the achieved safety level at the Mochovce NPP before commissioning is given. It contains licensing steps in Slovakia during commissioning; Status and methodology of Mochovce safety analysis report; Mochovce NPP safety enhancement program; Regulatory body policy towards Mochovce NPP safety enhancement; Recent development in Mochovce pre-operational safety enhancement program review and assessment process; Licensing steps in Slovakia during commissioning

How Productive Is Workplace Health and Safety?

DEFF Research Database (Denmark)

Buhai, I. Sebastian; Cottini, Elena; Westergaard-Nielsen, Niels

2017-01-01

In this paper, we investigate the causal impact of workplace health and safety practices on firm performance, using Danish longitudinal matched employer–employee data merged with unique cross-sectional representative firm survey data on work environment conditions. We estimate standard production...... functions, augmented with workplace environment indicators, addressing both time-invariant and time-varying potentially relevant unobservables in the production process. We find positive and large productivity effects of improved physical dimensions of the health and safety environment, specifically...

42 CFR 3.208 - Continued protection of patient safety work product.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Continued protection of patient safety work product... GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.208 Continued protection of patient safety work...

Safety and excellence--is regulation ensuring their achievement

International Nuclear Information System (INIS)

Levesque, R.J.A.

1992-01-01

Canada has a large, vigorous nuclear industry staffed by competent people, and a vigourous, independent regulatory agency similarly staffed. Nevertheless, there have been many signs over the last few years that the level of operating and engineering excellence needed to ensure a high level of safety was not being achieved in some key sections of the industry. Years of successful, accident-free operation - a hallmark of Canadian nuclear generating stations - are not by themselves a proof of adequate safety. Signs that the level of excellence is not being met in the nuclear reactor business have been seen, for example, in reviews of significant events, in the standard of generating documentation, and in the time taken to implement necessary design modifications. In the radioisotope business, the number of violations of licence conditions has been growing steadily, and there are an unacceptable number of workers exceeding regulatory dose limits. While many of these violations are minor in themselves, their prevalence suggests a degree of complacency has been developing which will be an enemy of excellence. Equally, the level of review, assessment, inspection and confirmatory research carried out in the past by the Atomic Energy Control Board (AECB) has been clearly inadequate. The paper discusses these and other examples of a lack of excellence, particularly in organization and management within its licensees and its effect on safety,. and identifies some of the performance indicators used. The paper also identifies some of the actions that are being taken by the AECB and the licensees to ensure an adequate level of safety is being maintained. The AECB is increasing, for example, its frequency of inspections in several industrial sectors and increasing its depth of safety review of nuclear generating stations

Safety issues at the defense production reactors

International Nuclear Information System (INIS)

1987-01-01

The United States produces plutonium and tritium for use in nuclear weapons at the defense production reactors endash the N Reactor in Washington and the Savannah River reactors in South Carolina. This report reaches general conclusions about the management of those reactors and highlights a number of safety and technical issues that should be resolved. The report provides an assessment of the safety management, safety review, and safety methodology employed by the Department of Energy and the private contractors who operate the reactors for the federal government. The report is necessarily based on a limited review of the defense production reactors. It does not address whether any of the reactors are ''safe,'' because such an analysis would involve a determination of acceptable risk endash a matter of obvious importance, but one that was beyond the purview of the committee. It also does not address whether the safety of the production reactors is comparable to that of commercial nuclear power stations, because even this narrower question extended beyond the charge to the committee and would have involved detailed analyses that the committee could not undertake

Relevance of microbial finished product testing in food safety management

DEFF Research Database (Denmark)

Zwietering, Marcel H.; Jacxsens, Liesbeth; Membré, Jeanne Marie

2016-01-01

Management of microbiological food safety is largely based on good design of processes, products and procedures. Finished product testing may be considered as a control measure at the end of the production process. However, testing gives only very limited information on the safety status of a food......-active way by implementing an effective food safety management system. For verification activities in a food safety management system, finished product testing may however be useful. For three cases studies; canned food, chocolate and cooked ham, the relevance of testing both of finished products....... If a hazardous organism is found it means something, but absence in a limited number of samples is no guarantee of safety of a whole production batch. Finished product testing is often too little and too late. Therefore most attention should be focussed on management and control of the hazards in a more pro...

The aspect of personnel metal attitude in the production safety

International Nuclear Information System (INIS)

Joyosukarto, Priyanto M.

2002-01-01

The occurrence of an accident could always be traced to component/system failures and/or human error. The two factors are closely related to competency of the personnel's involved, in which mental attitude is a decisive factor. Furthermore mental attitude could be viewed as an element of Safety (S) Culture. Consequently, S. Culture could might created or at lea ts, be enhanced by the introduction of appropriate values, norms, as well as attitudes. The ABC and TBC of safety norm have been discussed briefly. Whereas mental attitude has been defined and discussed in detail and graded into six levels, namely: attending, responding, complying, accepting, preferring, and integrating. To assure highest level of safety, personnel must achieve integrating level of attitude, in the sense that he would merely do an action on the basis of safety values and/or norms prevailing in the system, not due to external pressure. Furthermore, considering the work as a physical and an emotional activity resulting in stress and strain on the body, Karate exercises have been promoted as an alternative for enhancing mental attitude by means of reducing personnel vulnerability to strain and stress. This method is accomplished by exploiting Roux's Low of conditioning effect and by implementation of an in-depth understanding on the spiritual aspect of Karate. It is concluded that in the field of production safety, there is a positive correlation between Karate, mental attitude, competence, performance, quality, and safety

Information and Communication Technologies for the Safety and Security of Fish and Fishery Products

Directory of Open Access Journals (Sweden)

Liliana Mihaela MOGA

2017-06-01

Full Text Available The food industry is becoming more customer-oriented and needs faster response times to deal with food scandals and incidents. Good traceability systems help to minimize the production and distribution of unsafe or poor quality products, thereby minimizing the potential for bad publicity, liability, and recalls. The current food labelling systems cannot guarantee that the food is authentic, good quality and safe. Therefore, traceability is applied as a tool to assist in the assurance of food safety and quality as well as to achieve consumer confidence. This paper presents comprehensive information about traceability systems and the evolution concerning the actors involved and the information about safety and quality in the food supply chain administrated within the systems. Some inventive factors, which influence the traceability systems adoption, are underlined.

Achievements and Perspectives of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

International Nuclear Information System (INIS)

Louvat, D.; Lacoste, A.C.

2006-01-01

The Joint Convention on the Safety of Spent Fuel management and on the Safety of Radioactive Waste Management is the first legal instrument to directly address the safety of spent fuel and radioactive waste management on a global scale. The Joint Convention entered into force in 2001. This paper describes its process and its main achievements to date. The perspectives to establish of a Global Waste Safety Regime based on the Joint Convention are also discussed. (authors)

The future trends for research on quality and safety of animal products

Directory of Open Access Journals (Sweden)

Nigel D. Scollan

2010-01-01

Full Text Available Quality must now be considered as a convergence between consumers' wishes and needs and the intrinsic and extrinsic quality attributes of food products. The increasing number of quality attributes which must be considered, increasing globalisation and the heterogeneity in consumption habits between countries are making this convergence progressively more difficult. In parallel, science is rapidly evolving (with the advent of genomics for instance, and a growing number of applications is thus expected for the improvement of food safety and quality. Among the meat and fish quality attributes, colour is very important because it determines, at least in part, consumer choice. The key targets to ensure a satisfactory colour are animal nutrition and management for fish, processing and product conditioning for meat. Tenderness and flavour continue to be important issues for the consumer because eating remains a pleasure. They both determine quality experience which itself influences repetitive purchase. Meat tenderness is a very complex problem which can be solved only by a holistic approach involving all the factors from conception, animal breeding and production, muscle biology and slaughter practice to carcass processing and meat preparation at the consumer end. Today, safety and healthiness are among the most important issues. Unfortunately, animal products can potentially be a source of biological and chemical contamination for consumers. The introduction of both control strategies along the food chain and the development of a food safety management system, from primary production to the domestic environment, are key issues that must be achieved. Despite a high dietary supply of saturated fats by dairy and meat products, it is imperative that professionals involved in animal research and in the associated industry convey the positive nutritional contributions of animal products to both consumers and health professionals. The latter include protein

Packaging Evaluation Approach to Improve Cosmetic Product Safety

OpenAIRE

Benedetta Briasco; Priscilla Capra; Arianna Cecilia Cozzi; Barbara Mannucci; Paola Perugini

2016-01-01

In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packag...

Theoretical Application of Supervision over Quality and Safety of Agricultural Products

Institute of Scientific and Technical Information of China (English)

Xin; CHENG; Ying; ZHANG

2013-01-01

Supervision over quality and safety of agricultural products has received high attention of management department.Competent authorities have formulated and issued many measures to strengthen supervision over quality and safety of agricultural products and improve China’s agricultural product quality and safety level.From the perspective of management science,this paper elaborates basic contents of two basic management theories,Broken Windows Effect and Effect of Heat Furnace.Then,it analyzes influence of Broken Windows Effect and Effect of Heat Furnace on supervision over quality and safety of agricultural products.Finally,it comes up with recommendations for supervision over quality and safety of agricultural products.

Analysis on safety production in coal mines Henan Province

Institute of Scientific and Technical Information of China (English)

KONG Liu-an; ZHANG Wen-yong

2006-01-01

Based on the rigorous situation of safety production in coal mines, the paper analyzed the statistical data of recent accidents indexes in Henan's coal mines. Using investigation and comparison analysis methods, a specified analysis on mining conditions, technical facility level, safety input and vocational quality of workers in Henan's coal mines was conducted. The result indicates that there have been existing such main safety production problems as weak safety management, low-level facilities, inadequate safety input and poor vocational quality and so on. Finally it proposes such reference solutions as to establish and perfect coal mining supervision and management system, to increase safety investment into techniques and facilities and to strengthen workers' safety education and introduction of more high-level professional talents.

Optimization of safety production supervision mode of coalmining enterprises

Energy Technology Data Exchange (ETDEWEB)

Zhou, M.; Xiao, Z. [China University of Mining and Technology, Xuzhou (China). School of Management

2005-12-01

In view of the fact that safety production supervision of coal mines in China features low efficacy, this paper applies principles of cybernetics to simulate the dynamic process of safety supervision, and proposes that institutional variables be controlled to support intermediate goals, which in turn contribute to the ultimate safety production objective. Rather than focussing all attention on safety issues of working faces, supervising departments of coalmines are advised to pay much more attention to institutional factors that may impact people's attitude and behavior, which are responsible for most coalmine accidents. It is believed that such a shift of attention can effectively reduce coalmining production accidents and greatly enhance supervision efficacy. 8 refs., 5 figs.

[Safety monitoring of cell-based medicinal products (CBMPs)].

Science.gov (United States)

Funk, Markus B; Frech, Marion; Spranger, Robert; Keller-Stanislawski, Brigitte

2015-11-01

Cell-based medicinal products (CBMPs), a category of advanced-therapy medicinal products (ATMPs), are authorised for the European market by the European Commission by means of the centralized marketing authorisation. By conforming to the German Medicinal Products Act (Sec. 4b AMG), national authorisation can be granted by the Paul-Ehrlich-Institut in Germany exclusively for ATMPs not based on a routine manufacturing procedure. In both procedures, quality, efficacy, and safety are evaluated and the risk-benefit balance is assessed. For the centralised procedure, mainly controlled clinical trial data must be submitted, whereas the requirements for national procedures could be modified corresponding to the stage of development of the ATMP. After marketing authorization, the marketing authorization/license holder is obligated to report all serious adverse reactions to the competent authority and to provide periodic safety update reports. If necessary, post-authorization safety studies could be imposed. On the basis of these regulatory measures, the safety of advanced therapies can be monitored and improved.

42 CFR 3.206 - Confidentiality of patient safety work product.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Confidentiality of patient safety work product. 3... individually identifiable health information in such patient safety work product, the direct identifiers listed at 45 CFR 164.514(e)(2) have been removed. (5) Disclosure of nonidentifiable patient safety work...

Safety assessment of smoke flavouring primary products by the European Food Safety Authority

NARCIS (Netherlands)

Theobald, A.; Arcella, D.; Carere, A.; Croera, C.; Engel, K.H.; Gott, D.; Gurtler, R.; Meier, D.; Pratt, I.; Rietjens, I.M.C.M.; Simon, R.; Walker, R.

2012-01-01

This paper summarises the safety assessments of eleven smoke flavouring primary products evaluated by the European Food Safety Authority (EFSA). Data on chemical composition, content of polyaromatic hydrocarbons and results of genotoxicity tests and subchronic toxicity studies are presented and

A chief safety officer as the driver and guardian of a great safety rating.

Science.gov (United States)

Steck, Oliver; Zenker, Daniel; Beatty, Tom

2013-02-01

If the Pharmaceutical Industry were to align to broad metrics that objectively state each product's "Safety Rating" two things would happen. First, Life Sciences companies would refocus dramatically on safety (followed by outcomes). Second, companies that have the highest aggregate "Safety Rating" would enjoy a significant competitive advantage. To achieve and maintain a high safety rating, the role of Safety officer needs to be elevated to the C-Suite.

Relevance of microbial finished product testing in food safety management

NARCIS (Netherlands)

Zwietering, M.H.; Jacxsens, L.; Membre, J.M.; Nauta, M.; Peterz, M.

2016-01-01

Management of microbiological food safety is largely based on good design of processes, products and procedures. Finished product testing may be considered as a control measure at the end of the production process. However, testing gives only very limited information on the safety status of a food.

DIVERSIFICATION OF A SAFETY FOOTWEAR PRODUCT

Directory of Open Access Journals (Sweden)

HARNAGEA Marta Cătălina

2017-05-01

Full Text Available Product diversification is a usual strategy of footwear producers. As a requirement related to competitiveness in this domain, diversification can be done by practical application of some criteria. Considering this aspect, the paper proposes a research on the diversification in the case of a safety footwear product by modifying its component patterns, while keeping the initial shape of the product. Thus, starting from a safety shoe model, diversification was performed by changing the configuration in the joining area of two patterns of the product. By joining the tongue with the bellows tongue, the upper with the quarter, the heel counter with the quarter and the collar and heel counter with quarter has resulted a family of models characterized by a reduction of the number of patterns in the product. The size of the set presents a significant influence on the theoretical nesting factor and implicitly on the size of the wastes. The analysis of the resulting new model types lead to highlighting the influence of the patterns number of the uppers and the area of the set on the usage index of the leather surface when cutting the parts and on the specific consumption.

Innovation of Supervision System for Quality and Safety of Edible Agricultural Products

Institute of Scientific and Technical Information of China (English)

Xingxing; MEI; Zhongchao; FENG

2014-01-01

This paper elaborated multidimensional characteristics of quality and safety of agricultural products,introduced current situation of quality and safety supervision of edible agricultural products in China,analyzed existing problems of quality and safety supervision system and corresponding reasons,and finally came up with recommendations for innovation of supervision system for quality and safety of agricultural products.

A primer of drug safety surveillance: an industry perspective. Part II: Product labeling and product knowledge.

Science.gov (United States)

Allan, M C

1992-01-01

To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part II of this series discusses specific issues regarding product labeling, such as developing the labeling, changing the labeling, and the legal as well as commercial ramifications of the contents of the labeling. An adverse event report scenario is further analyzed and suggestions are offered for maintaining the product labeling as an accurate reflection of the drug safety surveillance data. This article also emphasizes the necessity of product knowledge in adverse event database management. Both scientific and proprietary knowledge are required. Acquiring product knowledge is a part of the day-to-day activities of drug safety surveillance. A knowledge of the history of the product may forestall adverse publicity, as shown in the illustration. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction of the components of the process. Suggestions are offered

Application of Mixed Group Decision Making to Safety Evaluation of Agricultural Products

Institute of Scientific and Technical Information of China (English)

2012-01-01

In view of the gravity of issues concerning safety of agricultural products and urgency of resolving these issues,after analyzing the problems existing in safety of agricultural products,this article offers a method for evaluating safety of agricultural products on the basis of mixed group decision making.First of all,it introduces the factors influencing safety evaluation of agricultural products;subsequently,given that the judgment matrices offered by the group of experts contain both reciprocal and complementary judgment matrices in the process of jointly participating in evaluation arising from personal preference,it proposes to assemble expert information in order to obtain indicator weight using the OWA operator;finally,the process of evaluating safety of agricultural products is given.

The influence of farmland pollution on the quality and safety of agricultural products

Science.gov (United States)

Ma, Z. L.; Li, L. Y.; Ye, C.; Lin, X. Y.; B, C.; Wei

2018-02-01

The quality and safety of agricultural products is not only a major livelihood issues for people’s health, but also the main barriers to international trade of agricultural products nowadays. The soil is the foundation to the production of agricultural products and the guarantee of agricultural development. The farmland soil quality is directly related to the quality and safety of agricultural products. Our country’s soil has been polluted by a series of pollution, Such as the excessive discharge of industrial wastes, the encroachment of household waste, and the unreasonable use of pesticides and fertilizers. Soil degradation is a serious threat to the quality and safety of agricultural products, so eliminating soil degradation is the fundamental way out for quality and safety of agricultural products. By analyzing problems of the quality and safety of agricultural products in our country, and exploring the farmland soil influence on the quality and safety of agricultural products. This article provides a reference for improving the control level of quality and safety of agricultural products and the farmland soil quality.

On the Safety of Machine Learning: Cyber-Physical Systems, Decision Sciences, and Data Products.

Science.gov (United States)

Varshney, Kush R; Alemzadeh, Homa

2017-09-01

Machine learning algorithms increasingly influence our decisions and interact with us in all parts of our daily lives. Therefore, just as we consider the safety of power plants, highways, and a variety of other engineered socio-technical systems, we must also take into account the safety of systems involving machine learning. Heretofore, the definition of safety has not been formalized in a machine learning context. In this article, we do so by defining machine learning safety in terms of risk, epistemic uncertainty, and the harm incurred by unwanted outcomes. We then use this definition to examine safety in all sorts of applications in cyber-physical systems, decision sciences, and data products. We find that the foundational principle of modern statistical machine learning, empirical risk minimization, is not always a sufficient objective. We discuss how four different categories of strategies for achieving safety in engineering, including inherently safe design, safety reserves, safe fail, and procedural safeguards can be mapped to a machine learning context. We then discuss example techniques that can be adopted in each category, such as considering interpretability and causality of predictive models, objective functions beyond expected prediction accuracy, human involvement for labeling difficult or rare examples, and user experience design of software and open data.

Danish initiatives to improve the safety of meat products

DEFF Research Database (Denmark)

Wegener, Henrik Caspar

2010-01-01

and Campylobacter, and to a lesser extent Yersinia, Escherichia coli O157 and Listeria. Danish initiatives to improve the safety of meat products have focused on the entire production chain from the farm to the consumer, with a special emphasis on the pre-harvest stage of production. The control of bacterial......During the last two decades the major food safety problems in Denmark, as determined by the number of human patients, has been associated with bacterial infections stemming from meat products and eggs. The bacterial pathogens causing the majority of human infections has been Salmonella...

Optimizing Safety Stock Levels in Modular Production Systems Using Component Commonality and Group Technology Philosophy: A Study Based on Simulation

Directory of Open Access Journals (Sweden)

Kenneth Edgar Hernandez-Ruiz

2016-01-01

Full Text Available Modular production and component commonality are two widely used strategies in the manufacturing industry to meet customers growing needs for customized products. Using these strategies, companies can enhance their performance to achieve optimal safety stock levels. Despite the importance of safety stocks in business competition, little attention has been paid to the way to reduce them without affecting the customer service levels. This paper develops a mathematical model to reduce safety stock levels in organizations that employ modular production. To construct the model, we take advantage of the benefits of aggregate inventories, standardization of components, component commonality, and Group Technology philosophy in regard to stock levels. The model is tested through the simulation of three years of operation of two modular product systems. For each system, we calculated and compared the safety stock levels for two cases: (1 under the only presence of component commonality and (2 under the presence of both component commonality and Group Technology philosophy. The results show a reduction in safety stock levels when we linked the component commonality with the Group Technology philosophy. The paper presents a discussion of the implications of each case, features of the model, and suggestions for future research.

The Traceability and Safety of Fishery Products

OpenAIRE

Gheorghe Adrian ZUGRAVU; Ionica SOARE

2012-01-01

The paper follows two main objectives: to understand consumers’ perception of safety trasability and quality of fishery products and to identify communication levers in order to improve the perceived image of fishery products. The present research is focused on the fishery products, regardless of their presentation – fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers’ perception toward fishery products. The empirical study with brands indicated that ...

Present situation and countermeasures for managing expenses of safety in production in enterprise

International Nuclear Information System (INIS)

Pang Liefen

2012-01-01

The paper introduces the evolutions concerning accountant accounting for the capital of safety in production over the recent years, and analyses the present situation and reasons for the problems existed in enterprise as for gathering expenses of safety in production, and propose the countermeasures to reinforce the management of enterprise expenses of safety in production, in order to improve the management of enterprise expenses of safety in production and to enhance the level of the management in safety for the enterprise. (author)

The achievement and assessment of safety in systems containing software

International Nuclear Information System (INIS)

Ball, A.; Dale, C.J.; Butterfield, M.H.

1986-01-01

In order to establish confidence in the safe operation of a reactor protection system, there is a need to establish, as far as it is possible, that: (i) the algorithms used are correct; (ii) the system is a correct implementation of the algorithms; and (iii) the hardware is sufficiently reliable. This paper concentrates principally on the second of these, as it applies to the software aspect of the more accurate and complex trip functions to be performed by modern reactor protection systems. In order to engineer safety into software, there is a need to use a development strategy which will stand a high chance of achieving a correct implementation of the trip algorithms. This paper describes three broad methodologies by which it is possible to enhance the integrity of software: fault avoidance, fault tolerance and fault removal. Fault avoidance is concerned with making the software as fault free as possible by appropriate choice of specification, design and implementation methods. A fault tolerant strategy may be advisable in many safety critical applications, in order to guard against residual faults present in the software of the installed system. Fault detection and removal techniques are used to remove as many faults as possible of those introduced during software development. The paper also discusses safety and reliability assessment as it applies to software, outlining the various approaches available. Finally, there is an outline of a research project underway in the UKAEA which is intended to assess methods for developing and testing safety and protection systems involving software. (author)

Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products

Science.gov (United States)

Allison, Abimbola; Fouladkhah, Aliyar

2018-01-01

Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety. PMID:29389843

Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products.

Science.gov (United States)

Allison, Abimbola; Fouladkhah, Aliyar

2018-02-01

Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety.

Improving occupational safety and health by integration into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

42 CFR 3.210 - Required disclosure of patient safety work product to the Secretary.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Required disclosure of patient safety work product... HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Confidentiality and Privilege Protections of Patient Safety Work Product § 3.210 Required disclosure of patient...

Achieving safety/risk goals for less ATR backup power upgrades

International Nuclear Information System (INIS)

Atkinson, S.A.

1995-01-01

The Advanced Test Reactor probabilistic risk assessment for internal fire and flood events defined a relatively high risk for a total loss of electric power possibly leading to core damage. Backup power sources were disabled due to fire and flooding in the diesel generator area with propagation of the flooding to a common switchgear room. The ATR risk assessment was employed to define options for relocation of backup power system components to achieve needed risk reduction while minimizing costs. The risk evaluations were performed using sensitivity studies and importance measures. The risk-based evaluations of relocation options for backup power systems saved over $3 million from what might have been otherwise considered open-quotes necessaryclose quotes for safety/risk improvement. The ATR experience shows that the advantages of a good risk assessment are to define risk significance, risk specifics, and risk solutions which enable risk goals to be achieved at the lowest cost

Packaging Evaluation Approach to Improve Cosmetic Product Safety

Directory of Open Access Journals (Sweden)

Benedetta Briasco

2016-09-01

Full Text Available In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packaging; furthermore, different from food packaging, the cosmetic packaging is not regulated and, to date, appropriate guidelines are still missing. The aim of this work was to propose a practical approach to investigate commercial polymeric containers used in cosmetic field, especially through mechanical properties’ evaluation, from a safety point of view. First of all, it is essential to obtain complete information about raw materials. Subsequently, using an appropriate full factorial experimental design, it is possible to investigate the variables, like polymeric density, treatment, or type of formulation involved in changes to packaging properties or in formulation-packaging interaction. The variation of these properties can greatly affect cosmetic safety. In particular, mechanical properties can be used as an indicator of pack performances and safety. As an example, containers made of two types of polyethylene with different density, low-density polyethylene (LDPE and high-density polyethylene (HDPE, are investigated. Regarding the substances potentially extractable from the packaging, in this work the headspace solid-phase microextraction method (HSSPME was used because this technique was reported in the literature as suitable to detect extractables from the polymeric material here employed.

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

Science.gov (United States)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

The role of production and teamwork practices in construction safety: a cognitive model and an empirical case study.

Science.gov (United States)

Mitropoulos, Panagiotis Takis; Cupido, Gerardo

2009-01-01

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents. The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)--that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company. The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring. The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities. The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction

The Trends and their Impact on Fishery Products Safety and Quality

Directory of Open Access Journals (Sweden)

Gheorghe Adrian ZUGRAVU

2012-11-01

Full Text Available The paper follows two main objectives: to understand consumers’ perception of safety and quality of fishery products and to identify communication levers in order to improve the perceived image of fishery products. The present research is focused on the fishery products, regardless of their presentation – fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers’ perception toward fishery products. The empirical study with brands indicated that consumers are different awareness to domestic and foreign safety fish products. National fishery products got more attention from the consumers.

ACHIEVEMENT OF THE HIGHEST LEVEL OF SAFETY AND HEALTH AT WORK AND THE SATISFACTION OF EMPLOYEES IN THE TEXTILE INDUSTRY

Directory of Open Access Journals (Sweden)

Snezana Urosevic

2016-12-01

Full Text Available Safety and health at work involves the exercise of such working conditions that take certain measures and activities in order to protect the life and health of employees. The interest of society, of all stakeholders and every individual is to achieve the highest level of safety and health at work, to unwanted consequences such as injuries, occupational diseases and diseases related to work are reduced to a minimum, and to create the conditions work in which employees have a sense of satisfaction in the performance of their professional duties. Textile industry is a sector with higher risk, because the plants of textile industry prevailing unfavorable microclimate conditions: high air temperature and high humidity, and often insufficient illumination of rooms and increased noise. The whole line of production in the textile industry, there is a risk of injury, the most common with mechanical force, or gaining burns from heat or chemicals. All of these factors are present in the process of production and processing of textiles and the same may affect the incidence of occupational diseases of workers, absenteeism, reduction of their working capacity and productivity. With the progress of the textile industry production increases in the number of hazardous and harmful substances that may pose a potential danger to the employee in this branch of the economy as well as the harmful impact on the environment. Therefore, it is important to give special attention to these problems.

Measures For Achieving Sustainable Rabbit Production In ...

African Journals Online (AJOL)

A study was conducted to ascertain ways of achieving sustainable rabbits production in Ogba/Egbema/Ndoni Local Government Area of Rivers State. The study population involved 120 respondents comprising 40 students and 80 farmers. Two sets of structured questionnaire designed with a 4-point Likert type rating scale ...

Efficacy and Safety of Pomegranate Medicinal Products for Cancer

Science.gov (United States)

Vlachojannis, Christian

2015-01-01

Preclinical in vitro and in vivo studies demonstrate potent effects of pomegranate preparations in cancer cell lines and animal models with chemically induced cancers. We have carried out one systematic review of the effectiveness of pomegranate products in the treatment of cancer and another on their safety. The PubMed search provided 162 references for pomegranate and cancer and 122 references for pomegranate and safety/toxicity. We identified 4 clinical studies investigating 3 pomegranate products, of which one was inappropriate because of the low polyphenol content. The evidence of clinical effectiveness was poor because the quality of the studies was poor. Although there is no concern over safety with the doses used in the clinical studies, pomegranate preparations may be harmful by inducing synthetic drug metabolism through activation of liver enzymes. We have analysed various pomegranate products for their content of anthocyanins, punicalagin, and ellagic acid in order to compare them with the benchmark doses from published data. If the amount of coactive constituents is not declared, patients risk not benefiting from the putative pomegranate effects. Moreover, pomegranate end products are affected by many determinants. Their declaration should be incorporated into the regulatory guidance and controlled before pomegranate products enter the market. PMID:25815026

[Discussion on agricultural product quality and safety problem from ecological view].

Science.gov (United States)

Xiao, Ming; Dong, Nan; Lyu, Xin

2015-08-01

There are many different perspectives about the sustainable agriculture, which had been proposed since the last three decades in the world. While China's ecologists and agronomists proposed a similar concept named 'ecological agriculture'. Although ecological agriculture in China has achieved substantial progress, including theory, models and supporting technologies nearly several decades of practice and development, its application guidance still is not yet clear. The organic agriculture model proposed by European Union is popular, but it is limited in the beneficiary groups and the social and ecological responsibility. In this context, the article based on an ecological point of view, analyzed the shortcomings of ecological imbalance caused by a single mode of agricultural production and the negative impact on the quality of agricultural products, and discussed the core values of ecological agriculture. On this basis, we put forward the concept of sustainable security of agricultural products. Based on this concept, an agricultural platform was established under the healthy ecosysphere environment, and from this agricultural platform, agricultural products could be safely and sustainably obtained. Around the central value of the concept, we designed the agricultural sustainable and security production model. Finally, we compared the responsibility, benefiting groups, agronomic practices selection and other aspects of sustainable agriculture with organic agriculture, and proved the advancement of sustainable agricultural model in agricultural production quality and safety.

77 FR 24722 - Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability

Science.gov (United States)

2012-04-25

...] Draft Guidance for Industry: Safety of Nanomaterials in Cosmetic Products; Availability AGENCY: Food and... safety assessment of nanomaterials in cosmetic products. This guidance is intended to assist industry in... Cosmetic Products.'' The draft guidance is intended to assist industry in identifying the potential safety...

Consensus achievement of leadership, organisational and individual factors that influence safety climate: Implications for nursing management.

Science.gov (United States)

Fischer, Shelly A; Jones, Jacqueline; Verran, Joyce A

2018-01-01

To validate a framework of factors that influence the relationship of transformational leadership and safety climate, and to enable testing of safety chain factors by generating hypotheses regarding their mediating and moderating effects. Understanding the patient safety chain and mechanisms by which leaders affect a strong climate of safety is essential to transformational leadership practice, education, and research. A systematic review of leadership and safety literature was used to develop an organising framework of factors proposed to influence the climate of safety. A panel of 25 international experts in leadership and safety engaged a three-round modified Delphi study with Likert-scored surveys. Eighty per cent of participating experts from six countries were retained to the final survey round. Consensus (>66% agreement) was achieved on 40 factors believed to influence safety climate in the acute care setting. Consensus regarding specific factors that play important roles in an organisation's climate of safety can be reached. Generally, the demonstration of leadership commitment to safety is key to cultivating a culture of patient safety. Transformational nurse leaders should consider and employ all three categories of factors in daily leadership activities and decision-making to drive a strong climate of patient safety. © 2017 John Wiley & Sons Ltd.

Achieving Customer Satisfaction through Integrated Products and Services

DEFF Research Database (Denmark)

Raja, Jawwad; Bourne, Dorota; Goffin, Keith

2013-01-01

Complex products such as manufacturing equipment have always needed maintenance and repair services. Increasingly, leading manufacturers are integrating products and services to generate increased revenues and achieve customer satisfaction. Designing integrated products and services requires...... a different approach to new product development and a clear understanding of how customers perceive the value they obtain from actual usage of products and services—so-called value-in-use. However, there is a lack of research on integrated products and services and how they impact customer satisfaction....... An exploratory study was undertaken to understand customers' views on integrated products and services and the value-in-use derived from such offerings. As value-in-use and its impacts are complicated concepts, a technique from psychology—Repertory Grid Technique—was used to gather data in 33 interviews...

Part I. Fuel-motion diagnostics in support of fast-reactor safety experiments. Part II. Fission product detection system in support of fast reactor safety experiments

International Nuclear Information System (INIS)

Devolpi, A.; Doerner, R.C.; Fink, C.L.; Regis, J.P.; Rhodes, E.A.; Stanford, G.S.; Braid, T.H.; Boyar, R.E.

1986-05-01

In all destructive fast-reactor safety experiments at TREAT, fuel motion and cladding failure have been monitored by the fast-neutron/gamma-ray hodoscope, providing experimental results that are directly applicable to design, modeling, and validation in fast-reactor safety. Hodoscope contributions to the safety program can be considered to fall into several groupings: pre-failure fuel motion, cladding failure, post-failure fuel motion, steel blockages, pretest and posttest radiography, axial-power-profile variations, and power-coupling monitoring. High-quality results in fuel motion have been achieved, and motion sequences have been reconstructed in qualitative and quantitative visual forms. A collimated detection system has been used to observe fission products in the upper regions of a test loop in the TREAT reactor. Particular regions of the loop are targeted through any of five channels in a rotatable assembly in a horizontal hole through the biological shield. A well-type neutron detector, optimized for delayed neutrons, and two GeLi gamma ray spectrometers have been used in several experiments. Data are presented showing a time history of the transport of Dn emitters, of gamma spectra identifying volatile fission products deposited as aerosols, and of fission gas isotopes released from the coolant

Design of agricultural product quality safety retrospective supervision system of Jiangsu province

Science.gov (United States)

Wang, Kun

2017-08-01

In store and supermarkets to consumers can trace back agricultural products through the electronic province card to query their origin, planting, processing, packaging, testing and other important information and found that the problems. Quality and safety issues can identify the responsibility of the problem. This paper designs a retroactive supervision system for the quality and safety of agricultural products in Jiangsu Province. Based on the analysis of agricultural production and business process, the goal of Jiangsu agricultural product quality safety traceability system construction is established, and the specific functional requirements and non-functioning requirements of the retroactive system are analyzed, and the target is specified for the specific construction of the retroactive system. The design of the quality and safety traceability system in Jiangsu province contains the design of the overall design, the trace code design and the system function module.

Safety issues of nuclear production of hydrogen

International Nuclear Information System (INIS)

Piera, Mireia; Martinez-Val, Jose M.; Jose Montes, Ma

2006-01-01

Hydrogen is not an uncommon issue in Nuclear Safety analysis, particularly in relation to severe accidents. On the other hand, hydrogen is a household name in the chemical industry, particularly in oil refineries, and is also a well known chemical element currently produced by steam reforming of natural gas, and other methods (such as coal gasification). In the not-too-distant future, hydrogen will have to be produced (by chemical reduction of water) using renewable and nuclear energy sources. In particular, nuclear fission seems to offer the cheapest way to provide the primary energy in the medium-term. Safety principles are fundamental guidelines in the design, construction and operation both of hydrogen facilities and nuclear power plants. When these two technologies are integrated, a complete safety analysis must consider not only the safety practices of each industry, but any interaction that could be established between them. In particular, any accident involving a sudden energy release from one of the facilities can affect the other. Release of dangerous substances (chemicals, radiotoxic effluents) can also pose safety problems. Although nuclear-produced hydrogen facilities will need specific approaches and detailed analysis on their safety features, a preliminary approach is presented in this paper. No significant roadblocks are identified that could hamper the deployment of this new industry, but some of the hydrogen production methods will involve very demanding safety standards

Sustainable Development of Food Safety

DEFF Research Database (Denmark)

Fabech, B.; Georgsson, F.; Gry, Jørn

to food safety - Strengthen efforts against zoonoses and pathogenic microorganisms - Strengthen safe food handling and food production in industry and with consumers - Restrict the occurrence of chemical contaminants and ensure that only well-examined production aids, food additives and flavours are used...... - Strengthen scientific knowledge of food safety - Strengthen consumer knowledge The goals for sustainable development of food safety are listed from farm to fork". All of the steps and areas are important for food safety and consumer protection. Initiatives are needed in all areas. Many of the goals...... in other areas. It should be emphasized that an indicator will be an excellent tool to assess the efficacy of initiatives started to achieve a goal. Conclusions from the project are: - Sustainable development in food safety is important for humanity - Focus on the crucial goals would optimize the efforts...

Quality and Safety Aspects of Cereals (Wheat) and Their Products.

Science.gov (United States)

Varzakas, Theo

2016-11-17

Cereals and, most specifically, wheat are described in this chapter highlighting on their safety and quality aspects. Moreover, wheat quality aspects are adequately addressed since they are used to characterize dough properties and baking quality. Determination of dough properties is also mentioned and pasta quality is also described in this chapter. Chemometrics-multivariate analysis is one of the analyses carried out. Regarding production weighing/mixing of flours, kneading, extruded wheat flours, and sodium chloride are important processing steps/raw materials used in the manufacturing of pastry products. Staling of cereal-based products is also taken into account. Finally, safety aspects of cereal-based products are well documented with special emphasis on mycotoxins, acrylamide, and near infrared methodology.

Screening-Level Safety Assessment of Personal Care Product Constituents Using Publicly Available Data

Directory of Open Access Journals (Sweden)

Ernest S. Fung

2018-06-01

Full Text Available Organizations recommend evaluating individual ingredients when assessing the safety of personal care or cosmetic products. The goal of this study was to present a screening-level safety assessment methodology to evaluate the safety of a product by identifying individual ingredients, determining their frequency of use in on-market products, and examining published safe-level-of-use information for each ingredient. As a case study, we evaluated WEN by Chaz Dean (WCD cleansing conditioners since there have been claims of adverse health effects associated with product use. We evaluated 30 ingredients in three on-market WCD cleansing conditioners. We then analyzed the National Library of Medicine’s Household Products Database and the Environmental Working Group’s (EWG Skin Deep Cosmetic Database, two of the largest publicly available databases, for other on-market personal care and cosmetic products that contained these ingredients. Safe-level-of-use information for each ingredient was obtained by reviewing peer-reviewed literature, the Food and Drug Administration’s (FDA generally recognized as safe (GRAS database, available Cosmetic Ingredient Review (CIR publications, and available product safety publications. The results of this analysis showed that more than 20,000 personal care and cosmetic products contained one or more of the evaluated ingredients used in WCD cleaning conditioners. Published safety information was available for 21 of the 30 evaluated ingredients: seven identified ingredients were designated as GRAS by the FDA and 16 ingredients had safe-level-of-use information available from the CIR. This study presents a screening-level safety assessment methodology that can serve as an initial screening tool to evaluate the safety of an ingredient intended for use in personal care and cosmetic products before a product is launched onto the market. This study provides evidence that the evaluated WCD cleansing conditioner ingredients

MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

Study on the Problems and Countermeasure in the Animal Products Quality and Safety

Institute of Scientific and Technical Information of China (English)

Shishan; WANG

2013-01-01

As the supply chain of animal products is long,there are many factors which would influence the quality safety of animal production.Therefore,by focusing on the present and having a vision for future,Jiaozuo government promulgated Ten Polices on the Food Safety in Jiaozuo City,which pushed forward the technological development,intensified measures to monitor the quality of animal products,set up a series of mechanism,and provided reference for the food quality and safety monitoring.

A proposal for safety design philosophy of HTGR for coupling hydrogen production plant

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ohashi, Hirofumi; Tazawa, Yujiro; Imai, Yoshiyuki; Nakagawa, Shigeaki; Tachibana, Yukio; Kunitomi, Kazuhiko

2013-06-01

Japan Atomic Energy Agency (JAEA) has been conducting research and development for hydrogen production utilizing heat from High Temperature Gas-cooled Reactors (HTGRs). Towards the realization of nuclear hydrogen production, coupled hydrogen production plants should not be treated as an extension of a nuclear plant in order to open the door for the entry of non-nuclear industries as well as assuring reactor safety against postulated abnormal events initiated in the hydrogen production plants. Since hydrogen production plant utilizing nuclear heat has never been built in the world, little attention has been given to the establishment of a safety design for such system including the High Temperature engineering Test Reactor (HTTR). In the present study, requirements in order to design, construct and operate hydrogen production plants under conventional chemical plant standards are identified. In addition, design considerations for safety design of nuclear facility are suggested. Furthermore, feasibility of proposed safety design and design considerations are evaluated. (author)

Strengthening Safety Culture as an Overriding Priority, in Achieving Global Nuclear Security Approach

International Nuclear Information System (INIS)

Kolundzija, V.

2006-01-01

In the IAEA glossary safety culture is defined as the assembly of characteristics and attitudes in organizations and individuals, which establishes that, as an overriding priority, protection and safety issues receive the attention warranted by their significance. It has been observed that a safety culture, as a part of both security and safety, possesses a few obstacles that should be noticed: safety culture cannot be directly regulated; variation in national cultures means that what constitutes as a good approach to enhancing safety culture in one country may not be the best approach in another. Three stages have been identified in developing and strengthening safety culture: 1 A technical issue (rules and regulations)/ first stage 2 Good safety performance (primarily in terms of safety targets or goals)/ second stage 3 A continuing process of improvement to which everyone can contribute/ third stage There are several key issues in safety culture, such as: a commitment, use of procedures, a conservative decision making (STAR) a reporting culture. Organizations and individuals should have attention on these. Overall common goals are to achieve and maintain a high level of safety and security of radioactive sources as well as facilities. Measures that are concerned on safeguards restrict access to the radioactive sources, conditioning and/or recycling of sources, and systems for detection the passage of the radioactive sources at strategic points, have gained main support. The main partners in implementation these measures are: IAEA, USA, Russian Federation, G8- Global Partnership, and European Union The member states of the IAEA have at their disposal internationally agreed standards. Current differences in applying standards in the IAEA member states are mainly related to state preparedness to cope with demands. Developing and less developed countries with small and medium nuclear programmes have difficulties to accept rules and regulations, to establish

THE FLUORBOARD A STATISTICALLY BASED DASHBOARD METHOD FOR IMPROVING SAFETY

International Nuclear Information System (INIS)

PREVETTE, S.S.

2005-01-01

The FluorBoard is a statistically based dashboard method for improving safety. Fluor Hanford has achieved significant safety improvements--including more than a 80% reduction in OSHA cases per 200,000 hours, during its work at the US Department of Energy's Hanford Site in Washington state. The massive project on the former nuclear materials production site is considered one of the largest environmental cleanup projects in the world. Fluor Hanford's safety improvements were achieved by a committed partnering of workers, managers, and statistical methodology. Safety achievements at the site have been due to a systematic approach to safety. This includes excellent cooperation between the field workers, the safety professionals, and management through OSHA Voluntary Protection Program principles. Fluor corporate values are centered around safety, and safety excellence is important for every manager in every project. In addition, Fluor Hanford has utilized a rigorous approach to using its safety statistics, based upon Dr. Shewhart's control charts, and Dr. Deming's management and quality methods

MANAGEMENT OF QUALITY AND SAFETY OF FOOD PRODUCTS OF ANIMAL ORIGIN

Directory of Open Access Journals (Sweden)

Goryana Yonkova

2016-12-01

Full Text Available Bulgaria is famous not only in Europe but throughout the world, except for its rich natural and cultural heritage, but also traditional dairy products (yogurt and cheese - cow, sheep, buffalo and goats; yellow cheese, honey and bee products, rose oil. To be competitive on national and international markets, food production must meet the requirements for quality assurance and food safety. The article presents the key economic indicators and threats related to quality management and safety of food products of animal origin in relation to the conservation of components of the environment and human health.

Achievements of European projects on membrane reactor for hydrogen production

NARCIS (Netherlands)

di Marcoberardino, G.; Binotti, M.; Manzolini, G.; Viviente, J.L.; Arratibel Plazaola, A.; Roses, L.; Gallucci, F.

2017-01-01

Membrane reactors for hydrogen production can increase both the hydrogen production efficiency at small scale and the electric efficiency in micro-cogeneration systems when coupled with Polymeric Electrolyte Membrane fuel cells. This paper discusses the achievements of three European projects

Using resources for scientific-driven pharmacovigilance: from many product safety documents to one product safety master file.

Science.gov (United States)

Furlan, Giovanni

2012-08-01

Current regulations require a description of the overall safety profile or the specific risks of a drug in multiple documents such as the Periodic and Development Safety Update Reports, Risk Management Plans (RMPs) and Signal Detection Reports. In a resource-constrained world, the need for preparing multiple documents reporting the same information results in shifting the focus from a thorough scientific and medical evaluation of the available data to maintaining compliance with regulatory timelines. Since the aim of drug safety is to understand and characterize product issues to take adequate risk minimization measures rather than to comply with bureaucratic requirements, there is the need to avoid redundancy. In order to identify core drug safety activities that need to be undertaken to protect patient safety and reduce the number of documents reporting the results of these activities, the author has reviewed the main topics included in the drug safety guidelines and templates. The topics and sources that need to be taken into account in the main regulatory documents have been found to greatly overlap and, in the future, as a result of the new Periodic Safety Update Report structure and requirements, in the author's opinion this overlap is likely to further increase. Many of the identified inter-document differences seemed to be substantially formal. The Development Safety Update Report, for example, requires separate presentation of the safety issues emerging from different sources followed by an overall evaluation of each safety issue. The RMP, instead, requires a detailed description of the safety issues without separate presentation of the evidence derived from each source. To some extent, however, the individual documents require an in-depth analysis of different aspects; the RMP, for example, requires an epidemiological description of the indication for which the drug is used and its risks. At the time of writing this article, this is not specifically

Safety and Health Division achievements during 40 years

International Nuclear Information System (INIS)

Noriah Mod Ali

2012-01-01

During her speech, presenter outlined several issues regarding on establishment of Safety and Health Division since 40 years. This division contain of 3 sub unit; Physical Safety Group, Medical Physic Group and Non-ionizing Radiation group (NIR). The objectives of this division to implement R and D activities and services regarding safety and radiological health also non-radiological to ensure public safety, environment and asset suit with obligations established by authorities, IAEA standards and regulations.(author)

Safety and efficacy of personal care products containing colloidal oatmeal.

Science.gov (United States)

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized. In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions) by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin. We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation. Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period.

IT safety in production data networks (PDN). Tracking, evaluation and elimination of safety threats; IT-Sicherheit in Produktionsnetzen (PDN). Aufspueren, einschaetzen und beseitigen von Sicherheitsbedrohungen

Energy Technology Data Exchange (ETDEWEB)

Neider, Ulrich [DETACK GmbH, Ludwigsburg (Germany)

2013-03-01

This contribution reports on the threats of production data networks. Within the context of the IT security, the risks of production data networks are not only based on a possible contamination by computer viruses. The author of this contribution increases awareness of dangers to whose production systems are faced. The author also presents a phase model from his own consulting practice in order to increase the safety of production data systems by implementation of a safety control. This phase model consists of the six following steps: (a) Stock taking of the state of the art; (b) Determination of the target (development of a safety concept); (c) Creation of an IT safety policy; (d) Application of IT safety policy; (e) Audit of the results (IT safety audit); (f) Regular safety tests.

Safety and risk assessment of ceramide 3 in cosmetic products.

Science.gov (United States)

Choi, Seul Min; Lee, Byung-Mu

2015-10-01

Ceramide 3 is used mainly as a moisturizer in various cosmetic products. Although several safety studies on formulations containing pseudo-ceramide or ceramide have been conducted at the preclinical and clinical levels for regulatory approval, no studies have evaluated the systemic toxicity of ceramide 3. To address this issue, we conducted a risk assessment and comprehensive toxicological review of ceramide and pseudo-ceramide. We assumed that ceramide 3 is present in various personal and cosmetic products at concentrations of 0.5-10%. Based on previously reported exposure data, the margin of safety (MOS) was calculated for product type, use pattern, and ceramide 3 concentration. Lipsticks with up to 10% ceramide 3 (MOS = 4111) are considered safe, while shampoos containing 0.5% ceramide 3 (MOS = 148) are known to be safe. Reported MOS values for body lotion applied to the hands (1% ceramide 3) and back (5% ceramide 3) were 103 and 168, respectively. We anticipate that face cream would be safe up to a ceramide 3 concentration of 3% (MOS = 149). Collectively, the MOS approach indicated no safety concerns for cosmetic products containing less than 1% ceramide 3. Copyright © 2015 Elsevier Ltd. All rights reserved.

The European space suit, a design for productivity and crew safety

Science.gov (United States)

Skoog, A. Ingemar; Berthier, S.; Ollivier, Y.

In order to fulfil the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today - and will be for several years - a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: • easy donning/doffing thru rear entry, • suit ergonomy optimisation, • display of operational information in alpha-numerical and graphical from, and • voice processing for operations and safety critical information. Concerning crew safety the major design features are: • a lower R-factor for emergency EVA operations thru incressed suit pressure, • zero prebreath conditions for normal operations, • visual and voice processing of all safety critical functions, and • an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

Achieving sustainable biomass conversion to energy and bio products

International Nuclear Information System (INIS)

Matteson, G. C.

2009-01-01

The present effort in to maximize biomass conversion-to-energy and bio products is examined in terms of sustain ability practices. New goals, standards in practice, measurements and certification are needed for the sustainable biomass industry. Sustainable practices produce biomass energy and products in a manner that is secure, renewable, accessible locally, and pollution free. To achieve sustainable conversion, some new goals are proposed. (Author)

Preliminary safety analysis of a PBMR supplying process heat to a co-located ethylene production plant

International Nuclear Information System (INIS)

Scarlat, Raluca O.; Cisneros, Anselmo T.; Koutchesfahani, Tawni; Hong, Rada; Peterson, Per F.

2012-01-01

This paper considers the safety analysis and licensing approach for co-locating a pebble bed modular reactor (PBMR) to provide process heat to an ethylene production unit. The PBMR is an advanced nuclear reactor design that provides 400 MW of thermal energy. Ethylene production is an energy intensive process that utilizes large gas furnaces to provide the heat for the process. Coupling a PBMR with an ethylene production plant would open a new market for nuclear power, and would provide the chemical industry with a cleaner power source, helping to achieve the Clean Air Act standards, and eliminating the 0.5 ton of CO 2 emissions per ton of produced ethylene. Our analysis uses the Chevron Phillips chemical plant in Sweeney, TX as a prototypical site. The plant has four ethylene production trains, with a total power consumption of 2.4 GW, for an ethylene output of 3.7 million tons per year, 4% of the global ethylene production capacity. This paper proposes replacement of the gas furnaces by low-emission PBMR modules, and presents the safety concerns and risk mitigation and management options for this coupled system. Two coupling design options are proposed, and the necessary changes to the design basis events and severe accidents for the PBMR licensing application are discussed. A joint effort between the chemical and the nuclear entities to optimize the coupling design, establish preventive maintenance procedures, and develop emergency response plans for both of the units is recommended.

Preliminary safety analysis of a PBMR supplying process heat to a co-located ethylene production plant

Energy Technology Data Exchange (ETDEWEB)

Scarlat, Raluca O., E-mail: rscarlat@nuc.berkeley.edu [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States); Cisneros, Anselmo T. [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States); Koutchesfahani, Tawni [University of California, Chemical and Biomolecular Engineering, 201 Gilman Hall, Berkeley, CA 94720 (United States); Hong, Rada; Peterson, Per F. [University of California Berkeley, Nuclear Engineering, 4118 Etcheverry Hall, Berkeley, CA 94720 (United States)

2012-10-15

This paper considers the safety analysis and licensing approach for co-locating a pebble bed modular reactor (PBMR) to provide process heat to an ethylene production unit. The PBMR is an advanced nuclear reactor design that provides 400 MW of thermal energy. Ethylene production is an energy intensive process that utilizes large gas furnaces to provide the heat for the process. Coupling a PBMR with an ethylene production plant would open a new market for nuclear power, and would provide the chemical industry with a cleaner power source, helping to achieve the Clean Air Act standards, and eliminating the 0.5 ton of CO{sub 2} emissions per ton of produced ethylene. Our analysis uses the Chevron Phillips chemical plant in Sweeney, TX as a prototypical site. The plant has four ethylene production trains, with a total power consumption of 2.4 GW, for an ethylene output of 3.7 million tons per year, 4% of the global ethylene production capacity. This paper proposes replacement of the gas furnaces by low-emission PBMR modules, and presents the safety concerns and risk mitigation and management options for this coupled system. Two coupling design options are proposed, and the necessary changes to the design basis events and severe accidents for the PBMR licensing application are discussed. A joint effort between the chemical and the nuclear entities to optimize the coupling design, establish preventive maintenance procedures, and develop emergency response plans for both of the units is recommended.

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

25 Years of Community Activities towards Harmonization of Nuclear Safety Criteria and Requirements - Achievements and Prospects

International Nuclear Information System (INIS)

Lillington, J.N.; Turland, B.D.; Haste, T.J.; Seiler, J.M.; Carretero, A.; Perez, T.; Geutges, A.; Van Hienen, J.F.A.; Jehee, J.N.T.; Sehgal, B.R.; Mattila, L.; Holmstrom, H.; Karwat, H.; Maroti, L.; Toth, I.; Husarcek, J.

2001-10-01

The main objective was to advise the EC on future challenges and opportunities in terms of enhanced co-operation in the area of nuclear safety and harmonization of safety requirements and practices in an enlarged European Union. The activities were divided into 3 sub-tasks as follows: part A, to prepare an analysis, synthesis and assessment of the main achievements from Community activities related to the Resolutions on the technological problems of nuclear safety of 1975 and 1992, with due consideration for related research activities; part B, to prepare an overview of safety philosophies and practices in EU Member States, taking account of their specific national practices in terms of legal framework, type and age of operating nuclear reactors; part C, to provide elements of a strategy for future activities in the frame of the Council Resolutions, with particular attention to the context of enlargement of the EU. (author)

Safety considerations and countermeasures against fire and explosion at an HTGR-hydrogen production system. Proposal of safety design concept

International Nuclear Information System (INIS)

Nishihara, T.; Hada, K.; Shibata, T.; Shiozawa, S.

1996-01-01

Establishment of safety design concept and countermeasures against fire and explosion accidents is among key safety-related issues in an HTGR-hydrogen production system. We propose the different safety design concepts depending upon the origin of fire and explosion which may happen in the HTGR-hydrogen production plant. Against fire and explosion originated outside the reactor building (R/B), namely in the area of hydrogen production plant, the safety design concept is primarily to take a safe distance for preventing the damage on safety-related items or a proof wall if necessary. Because the hydrogen production plant is designed in the same safety level as a conventional chemical plant. The safe distance is proposed to limit an incident overpressure to 10 kPa so as not to suffer any damage on the items and to limit a wall-averaged temperature of concrete structures of the R/B to 175degC according to the current regulation. On the other hand, against a potential possibility of explosion originated inside the R/B, the safety design concept is to minimize the possibility of explosion low enough to assume no occurrence inside the R/B. That is, the measure is to exclude a simultaneous failure of a secondary helium piping and an endothermic chemical reactor. Furthermore, in severe accident condition in which the explosion may be postulated a priori, an incidental overpressure of explosion inside the reactor containment vessel (C/V) should be limited so as not to fail the C/V through restricting the amount of combustible gas ingress into the C/V by means of a combination of C/V isolation valve installed in the helium piping and emergency shut off valve in the process feed gas line. (author)

Uranium Production Safety Assessment Team. UPSAT. An international peer review service for uranium production facilities

International Nuclear Information System (INIS)

1996-01-01

The IAEA Uranium Production Safety Assessment Team (UPSAT) programme is designed to assist Member States to improve the safe operation of uranium production facilities. This programme facilitates the exchange of knowledge and experience between team members and industry personnel. An UPSAT mission is an international expert review, conducted outside of any regulatory framework. The programme is implemented in the spirit of voluntary co-operation to contribute to the enhancement of operational safety and practices where it is most effective, at the facility itself. An UPSAT review supplements other facility and regulatory efforts which may have the same objective

The safety and regulation of natural products used as foods and food ingredients.

Science.gov (United States)

Abdel-Rahman, Ali; Anyangwe, Njwen; Carlacci, Louis; Casper, Steve; Danam, Rebecca P; Enongene, Evaristus; Erives, Gladys; Fabricant, Daniel; Gudi, Ramadevi; Hilmas, Corey J; Hines, Fred; Howard, Paul; Levy, Dan; Lin, Ying; Moore, Robert J; Pfeiler, Erika; Thurmond, T Scott; Turujman, Saleh; Walker, Nigel J

2011-10-01

The use of botanicals and dietary supplements derived from natural substances as an adjunct to an improved quality of life or for their purported medical benefits has become increasingly common in the United States. This review addresses the safety assessment and regulation of food products containing these substances by the U.S. Food and Drug Administration (FDA). The issue of safety is particularly critical given how little information is available on the toxicity of some of these products. The first section uses case studies for stevia and green tea extracts as examples of how FDA evaluates the safety of botanical and herbal products submitted for consideration as Generally Recognized as Safe under the Federal Food, Drug, and Cosmetics Act. The 1994 Dietary Supplement Health Education Act (DSHEA) created a regulatory framework for dietary supplements. The article also discusses the regulation of this class of dietary supplements under DSHEA and addresses the FDA experience in analyzing the safety of natural ingredients described in pre-market safety submissions. Lastly, we discuss an ongoing interagency collaboration to conduct safety testing of nominated dietary supplements.

The Effect of Safety Costs on Productivity and Quality: A Case Study of Five Steel Companies in Ahvaz

Directory of Open Access Journals (Sweden)

Gholamabbas Shirali

2016-10-01

Full Text Available Background The implementation of a safety program is one of the most effective factors in increasing productivity. A look to safety from the perspective of efficiency can indicate necessary investment in safety for all, especially the managers of companies. Objectives The aim of this study was to evaluate the effect of safety costs on some indicators of productivity and quality in industrial companies. Methods This study was a retrospective analysis and was implemented in five steel companies in Ahvaz. The data relating to the safety costs such as staffing costs and total safety costs, and productivity and quality indicators were collected in five years. This information and data were collected according to statistics from documents and archives of safety, accounting, and production sectors of companies. Costs as well as numbers and figures of variables were expressed in the form of per capita and percentage to make the data comparable. Linear and generalized regression models and Wald Chi-Square test were used by the SPSS 22 software to determine the relationships between them. Results Safety costs such as capita labor safety costs and capita total safety costs or percentage safety labor costs to labor costs, showed a significant positive effect on labor productivity, labor competitiveness, total factor productivity, quality index and production rates (in some cases, P = 0.001. Conclusions The total safety cost and safety labor compensation generally, regardless of the nature and quality of the safety management system, can impact productivity, quality and quantity of production in addition to other factors of production. Surely if safety programs are targeted and codified, the effect of the investment will be doubled.

Safety and efficacy of personal care products containing colloidal oatmeal

Directory of Open Access Journals (Sweden)

Criquet M

2012-11-01

Full Text Available Maryline Criquet,1 Romain Roure,1 Liliane Dayan,2 Virginie Nollent,1 Christiane Bertin11Johnson & Johnson Santé Beauté France, Issy les Moulineaux, 2Independent consultant dermatologist, Paris, FranceBackground: Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vulnerable skin is of particular importance and the risk of developing further skin irritations and/or allergies should be minimized.Methods: In a series of studies, we tested the safety of personal care products containing oatmeal (creams, cleansers, lotions by assessing their irritant/allergenic potential on repeat insult patch testing, in safety-in-use and ocular studies using subjects with nonsensitive and sensitive skin. We also tested the skin moisturizing and repair properties of an oatmeal-containing skin care product for dry skin.Results: We found that oatmeal-containing personal care products had very low irritant potential as well as a very low allergenic sensitization potential. Low-level reactions were documented in 1.0% of subjects during the induction phase of repeat insult patch testing; one of 2291 subjects developed a persistent but doubtful low-level reaction involving edema during the challenge phase in repeat insult patch testing. No allergies were reported by 80 subjects after patch testing after in-use application. Sustained skin moisturizing was documented in subjects with dry skin that lasted up to 2 weeks after product discontinuation.Conclusion: Our results demonstrate that colloidal oatmeal is a safe and effective ingredient in personal care products. No allergies were reported by consumers of 445,820 products sold during a 3-year period.Keywords: Avena sativa, colloids, protective agents, atopic dermatitis, irritant dermatitis, allergenic dermatitis, skin

Efficacy and Safety of Pomegranate Medicinal Products for Cancer

OpenAIRE

Vlachojannis, Christian; Zimmermann, Benno F.; Chrubasik-Hausmann, Sigrun

2015-01-01

Preclinical in vitro and in vivo studies demonstrate potent effects of pomegranate preparations in cancer cell lines and animal models with chemically induced cancers. We have carried out one systematic review of the effectiveness of pomegranate products in the treatment of cancer and another on their safety. The PubMed search provided 162 references for pomegranate and cancer and 122 references for pomegranate and safety/toxicity. We identified 4 clinical studies investigating 3 pomegranate ...

Preliminary safety analysis of the HTTR-IS nuclear hydrogen production system

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ohashi, Hirofumi; Tazawa, Yujiro; Tachibana, Yukio; Sakaba, Nariaki

2010-06-01

Japan Atomic Energy Agency is planning to demonstrate hydrogen production by thermochemical water-splitting IS process utilizing heat from the high-temperature gas-cooled reactor HTTR (HTTR-IS system). The previous study identified that the HTTR modification due to the coupling of hydrogen production plant requires an additional safety review since the scenario and quantitative values of the evaluation items would be altered from the original HTTR safety review. Hence, preliminary safety analyses are conducted by using the system analysis code. Calculation results showed that evaluation items such as a coolant pressure, temperatures of heat transfer tubes at the pressure boundary, etc., did not exceed allowable values. Also, the peak fuel temperature did not exceed allowable value and therefore the reactor core was not damaged and cooled sufficiently. This report compiles calculation conditions, event scenarios and the calculation results of the preliminary safety analysis. (author)

Efficiency of the functioning of the state control system for the safety and quality of animal products in Ukraine

Directory of Open Access Journals (Sweden)

I. Kyryliuk

2017-12-01

Full Text Available The study reveals the results of evaluating the effectiveness of the state control system (supervision on the safety and individual indicators of the quality of livestock products in Ukraine. The necessity of application of such components of efficiency as legislation, management and its organizational structure, inspection and laboratory service, information, training and communications is substantiated. It has been determined that during a sufficiently long period of time (until 2015, the system of state control (supervision was archaic and actually focused on the principles of command and administrative economy. The modern tendencies and specifics of the improvement of the Ukrainian control system in the direction of its harmonization with the European one are shown. The emphasis was on significant volumes of work that needed to be done in a very short time, as well as in the absence of adequate funding and appropriate skilled specialists. The emergence of clarity and unambiguousness in determining the responsibility of market operators for violating the legislation requirements in the field of production and circulation of animal origin food products was emphasized. Along with the achievements, there were identified systemic problems related to the technical regulation of safety assurance processes and individual quality indicators in Ukraine. Also it was noted and revealed that legislation in the area of guaranteeing the quality and safety of livestock products in Ukraine remains incomplete and not fully developed. The necessity of development of a number of by-laws and allocation of necessary financing for effective functioning of the state control system over product safety is substantiated. Article specified on the presence of insufficient number of professional inspection and laboratory services is underlined. The mechanisms of avoiding corruption risks and excessive pressure on the subjects of the livestock production market are

Analysis on Pollution Factors in Asparagus Production and Research on Safety Production Technology

OpenAIRE

Ma, Liping; Hao, Bianqing; Qiao, Xiongwu

2013-01-01

Based on the analysis on the infection degree, infection law and influencing factors of the main diseases on asparagus and the analysis on the pollution factors in asparagus production such as blind pesticide use, atmospheric pollution and acid rain, the pollution of soil and fertilizer, this article proposes asparagus safety production technologies which include the selection of disease-resistant variety and suitable planting field, scientific and reasonable disease control, balanced fertili...

49 CFR 236.907 - Product Safety Plan (PSP).

Science.gov (United States)

2010-10-01

... addressed during the life cycle of the product, including maximum threshold limits for each hazard (for... accordance with other criteria if demonstrated to the satisfaction of the Associate Administrator for Safety... contractor employees and supervisors necessary to ensure the safe and proper installation, implementation...

Safety assessment of VHTR hydrogen production system against fire, explosion and acute toxicity

International Nuclear Information System (INIS)

Murakami, Tomoyuki; Nishihara, Tetsuo; Kunitomi, Kazuhiko

2008-01-01

The Japan Atomic Energy Agency has been developing a nuclear hydrogen production system by using heat from the Very High Temperature Reactor (VHTR). This system will handle a large amount of combustible gas and toxic gas. The risk from fire, explosion and acute toxic exposure caused by an accident involving chemical material release in a hydrogen production system is assessed. It is important to ensure the safety of the nuclear plant, and the risks for public health should be sufficiently small. This report provides the basic policy for the safety evaluation in cases of accident involving fire, explosion and toxic material release in a hydrogen production system. Preliminary safety analysis of a commercial-sized VHTR hydrogen production system, GTHTR300C, is performed. This analysis provides us with useful information on the separation distance between a nuclear plant and a hydrogen production system and a prospect that an accident in a hydrogen production system does not significantly increase the risks of the public. (author)

The TESS database. Use in product safety assessment.

Science.gov (United States)

Litovitz, T

1998-01-01

The Toxic Exposure Surveillance System or TESS is a comprehensive poisoning surveillance database maintained by the American Association of Poison Control Centers. It now includes data on more than 20.3 million human poison exposures reported to US poison centres. TESS data are submitted by 67 of the 75 US poison control centres, covering 87% of the US population. Reports to US poison centres included in TESS originate both from the general public and from health professionals (12.9%) and include both patients managed at home or at the site of the exposure (73.6%) and those managed in hospitals, emergency departments, or other healthcare facilities (22.8%). TESS data are used by the pharmaceutical industry to monitor or defend product safety, by regulatory agencies proposing new regulations or considering new approvals or over-the-counter switches, and by clinical researchers attempting to characterise toxicity profiles or determine treatment protocols. TESS is a key component of an effective post-marketing surveillance programme, allowing early identification of previously unsuspected hazards, and early changes in formulations, labelling, or packaging when needed, thereby minimising injuries, deaths and product liability. Deaths, severe outcomes and comparisons of poisoning outcomes and hospitalisation rates between products or product categories are used to identify safety outliers. TESS data for each case of poisoning include identification of the substances implicated (including brand and formulation where known), patient age, outcome, specific clinical effects, exposure route, reason for the exposure (unintentional, suicidal, therapeutic error, etc.), antidotes used and the level of healthcare intervention utilised. Pharmaceuticals are implicated in 42% of TESS poisoning cases. About 53% of all cases of poisoning occur in children under 6 years of age. Of the more than 2.1 million cases reported to TESS in 1996, 123,095 (5.7%) were therapeutic errors and 32

Layoffs and tradeoffs: production, quality, and safety demands under the threat of job loss.

Science.gov (United States)

Probst, Tahira M

2002-07-01

Employees often face a conflict between production targets, quality assurance, and adherence to safety policies. In a time when layoffs are on the rise, it is important to understand the effects of employee job insecurity on these potentially competing demands. A laboratory experiment manipulated the threat of layoffs in a simulated organization and assessed its effect on employee productivity, product quality, and adherence to safety policies. Results suggest that student participants faced with the threat of layoffs were more productive, yet violated more safety rules and produced lower quality outputs, than participants in the control condition. Implications for organizations contemplating layoffs and directions for future research are discussed.

The importance of safety in achieving the widespread use of hydrogen as a fuel

Energy Technology Data Exchange (ETDEWEB)

Edeskuty, F.J.

1997-09-01

The advantages of hydrogen fuel have been adequately demonstrated on numerous occasions. However, two major disadvantages have prevented any significant amount of corresponding development. These disadvantages have been in the economics of producing sufficient quantities of hydrogen and in the safety (both real and perceived) of its use. To date work has mostly been properly centered on solving the economic problems. However, a greater effort on the safety of new hydrogen systems now being proposed also deserves consideration. To achieve the greatest safety in the expansion of the use of hydrogen into its wide-spread use as a fuel, attention must be given to four considerations. These are, obtaining knowledge of all the physical principles involved in the new uses, having in place the regulations that allow the safe interfacing of the new systems, designing and constructing the new systems with safety in mind, and the training of the large number of people that will become the handlers of the hydrogen. Existing organizations that produce, transport, or use hydrogen on a large scale have an excellent safety record. This safety record comes as a consequence of dedicated attention to the above-mentioned principles. However, where these principles were not closely followed, accidents have resulted. Some examples can be cited. As the use of hydrogen becomes more widespread, there must be a mechanism for assuring the universal application of these principles. Larger and more numerous fleet operations with hydrogen fuel may be the best way to begin the indoctrination of the general public to the more general use of hydrogen fuel. Demonstrated safe operation with hydrogen is vital to its final acceptance as the fuel of choice.

Shelf life and safety concerns of bakery products--a review.

Science.gov (United States)

Smith, James P; Daifas, Daphne Phillips; El-Khoury, Wassim; Koukoutsis, John; El-Khoury, Anis

2004-01-01

Bakery products are an important part of a balanced diet and, today, a wide variety of such products can be found on supermarket shelves. This includes unsweetened goods (bread, rolls, buns, crumpets, muffins and bagels), sweet goods (pancakes, doughnuts, waffles and cookies) and filled goods (fruit and meat pies, sausage rolls, pastries, sandwiches, cream cakes, pizza and quiche). However, bakery products, like many processed foods, are subject to physical, chemical and microbiological spoilage. While physical and chemical spoilage limits the shelf life of low and intermediate moisture bakery products, microbiological spoilage by bacteria, yeast and molds is the concern in high moisture products i.e., products with a water activity (a(w)) > 0.85. Furthermore, several bakery products also have been implicated infoodborne illnesses involving Salmonella spp., Listeria monoctyogenes and Bacillus cereus, while Clostridium botulinum is a concern in high moisture bakery products packaged under modified atmospheres. This extensive review is divided into two parts. Part I focuses on the spoilage concerns of low, intermediate and high moisture bakery products while Part II focuses on the safety concerns of high moisture bakery products only. In both parts, traditional and novel methods of food preservation that can be used by the bakery industry to extend the shelf life and enhance the safety of products are discussed in detail.

Environment, Safety, Health and Waste Management Plan

International Nuclear Information System (INIS)

1988-01-01

The mission of the Feed Materials Production Center (FMPC) is the production of high qaulity uranium metal for use by the US Department of Energy (DOE) in Defense Programs. In order to accomplish this mission and to maintain the FMPC as a viable facility in the DOE production complex, the facility must be brought into full compliance with all federal and state regulations and industry standards for environmental protection and worker safety. Where past practices have resulted in environmental insult, a comprehensive program of remediation must be implemented. The purpose of this combined Environment, Safety, Health and Waste Management Plan is to provide a road map for achieving needed improvements. The plan is structured to provide a comprehensive projection from the current fiscal year (FY) through FY 1994 of the programs, projects and funding required to achieve compliance. To do this, the plan is subdivided into chapters which discuss the applicable regulations;project schedules and funding requirements;details of the various programs for environment, safety, health and waste management;details of the ongoing National Environmental Policy Act (NEPA);the quality assurance program and the environmental monitoring program. 14 refs., 30 figs., 29 tabs

Process safety improvement-Quality and target zero

Energy Technology Data Exchange (ETDEWEB)

Van Scyoc, Karl [Det Norske Veritas (U.S.A.) Inc., DNV Energy Solutions, 16340 Park Ten Place, Suite 100, Houston, TX 77084 (United States)], E-mail: karl.van.scyoc@dnv.com

2008-11-15

Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The 'plan, do, check, act' improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

Process safety improvement-Quality and target zero

International Nuclear Information System (INIS)

Van Scyoc, Karl

2008-01-01

Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The 'plan, do, check, act' improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given

Process safety improvement--quality and target zero.

Science.gov (United States)

Van Scyoc, Karl

2008-11-15

Process safety practitioners have adopted quality management principles in design of process safety management systems with positive effect, yet achieving safety objectives sometimes remain a distant target. Companies regularly apply tools and methods which have roots in quality and productivity improvement. The "plan, do, check, act" improvement loop, statistical analysis of incidents (non-conformities), and performance trending popularized by Dr. Deming are now commonly used in the context of process safety. Significant advancements in HSE performance are reported after applying methods viewed as fundamental for quality management. In pursuit of continual process safety improvement, the paper examines various quality improvement methods, and explores how methods intended for product quality can be additionally applied to continual improvement of process safety. Methods such as Kaizen, Poke yoke, and TRIZ, while long established for quality improvement, are quite unfamiliar in the process safety arena. These methods are discussed for application in improving both process safety leadership and field work team performance. Practical ways to advance process safety, based on the methods, are given.

COMPARATIVE EFFICACY AND SAFETY OF HYPOLIPIDEMIC THERAPY WITH GENERIC AND ORIGINAL MEDICINAL PRODUCTS OF SIMVASTATIN

Directory of Open Access Journals (Sweden)

E. I. Tarlovskaya

2011-01-01

Full Text Available Aim. To compare efficacy , safety and pharmacoeconomical characteristics of generic and original medicinal products of simvastatin in achievement of cholesterol and low density lipoprotein target levels. Material and methods. 38 patients with arterial hypertension accompanied by type 2 diabetes with dyslipidemia were included into the study. They had no clinically obvious ischemic heart disease and did not receive hypolipidemic pharmacotherapy for a month before the study start. The patients were randomized into group A or group B. Patients of group A (n=18 received original simvastatin, patients of group B (n=20 received generic simvastatin. Initial simvastatin dose was 20 mg daily. Lipid plasma profile, liver enzymes, creatine phosphokinase were evaluated every 4 weeks. Cost-effectiveness ratio was calculated. Results. 11 patients (61% in group A and only 5 patients (25% in group B (χ2=5.05; р<0.05 achieved cholesterol target level with simvastatin in dose of 20 mg daily in 3 months of the treatment. Creatine phosphokinase blood level did not increase significantly. Achievement of cholesterol target level cost 814 and 952 RUB per patient in groups A and B, respectively , in 1 month of simvastatin treatment. These costs were 643 and 417 RUB per patient in groups A and B, respectively , in 3 months of treatment. Conclusion. The original simvastatin in comparison with generic one has advantages in hypolipidemic effect. Safety profile is similar for both medications. Original simvastatin therapy has lower cost than this for generic simvastatin therapy in achievement of cholesterol target level in 1 month of treatment. In 3 months the cost of treatment per patient is 227 RUB higher for original medication in comparison with this for generic medication.

77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

Science.gov (United States)

2012-02-22

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory... have accepted the revised ASTM F963-11 standard titled, Standard Consumer Safety Specifications for Toy Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will...

Microbiological performance of dairy processing plants is influenced by scale of production and the implemented food safety management system: a case study.

Science.gov (United States)

Opiyo, Beatrice Atieno; Wangoh, John; Njage, Patrick Murigu Kamau

2013-06-01

The effects of existing food safety management systems and size of the production facility on microbiological quality in the dairy industry in Kenya were studied. A microbial assessment scheme was used to evaluate 14 dairies in Nairobi and its environs, and their performance was compared based on their size and on whether they were implementing hazard analysis critical control point (HACCP) systems and International Organization for Standardization (ISO) 22000 recommendations. Environmental samples from critical sampling locations, i.e., workers' hands and food contact surfaces, and from end products were analyzed for microbial quality, including hygiene indicators and pathogens. Microbial safety level profiles (MSLPs) were constructed from the microbiological data to obtain an overview of contamination. The maximum MSLP score for environmental samples was 18 (six microbiological parameters, each with a maximum MSLP score of 3) and that for end products was 15 (five microbiological parameters). Three dairies (two large scale and one medium scale; 21% of total) achieved the maximum MSLP scores of 18 for environmental samples and 15 for the end product. Escherichia coli was detected on food contact surfaces in three dairies, all of which were small scale dairies, and the microorganism was also present in end product samples from two of these dairies, an indication of cross-contamination. Microbial quality was poorest in small scale dairies. Most operations in these dairies were manual, with minimal system documentation. Noncompliance with hygienic practices such as hand washing and cleaning and disinfection procedures, which is common in small dairies, directly affects the microbial quality of the end products. Dairies implementing HACCP systems or ISO 22000 recommendations achieved maximum MSLP scores and hence produced safer products.

Moderating effect of perceived risk on the relationship between product safety and intention

Directory of Open Access Journals (Sweden)

Sarina Ismail

2015-02-01

Full Text Available Herbal Products industry has experienced significant growth in product demand. Therefore, this study aims to identify the factors effecting the actual buying of Herbal Product. This study also examines the moderation effect of perceived risk on the relationship between product safety and intention. Mall intercept survey was used to collect data from six various states in Malaysia. The data is analyzed using Partial Least Squares (PLS path modeling. The path coefficient results supported the direct influence of intention on actual buying. Similarly, the findings reveal that perceived risk moderate the relationship between product safety and buying intention.

Fundamental philosophy on the safety design of the HTTR-IS hydrogen production system

International Nuclear Information System (INIS)

Ohashi, Kazutaka; Nishihara, Tetsuo; Kunitomi, Kazuhiko

2007-01-01

Japan Atomic Energy Agency (JAEA) has been conducting an R and D work on the VHTR reactor system and IS hydrogen production system to realize hydrogen production using nuclear heat. As a part of this activity, JAEA is planning to connect an IS test system to the High Temperature Engineering Test Reactor (HTTR) to demonstrate its technical feasibility. This paper proposes a fundamental philosophy on the safety design of the HTTR-IS hydrogen production system including the methodology to select postulated abnormal events and its event sequences and to define safety functions of the IS system to ensure the reactor safety. Also the measure to clarify the IS system as non-reactor system is proposed. (author)

The application of transcriptomics in the comparative safety assessment of (GMO-derived) plant products

NARCIS (Netherlands)

Kok, E.J.

2008-01-01

National and international organizations have discussed current approaches to the safety assessment of complex (plant) food products in general and the safety assessment of GMO-derived food products in particular. One of the recommendations of different expert meetings was that the new analytical

Harmonization of legislation and regulations to achieve food safety: US and Canada perspective.

Science.gov (United States)

Keener, Larry; Nicholson-Keener, Sophia M; Koutchma, Tatiana

2014-08-01

Trade in food and food ingredients among the nations of the world is rapidly expanding and, with this expansion, new supply chain partners, from globally disparate geographic regions, are being enrolled. Food and food ingredients are progressively sourced more from lesser developed nations. Food safety incidents in the USA and Canada show a high unfavorable correlation between illness outbreaks and imported foods. In the USA, for example, foodborne disease outbreaks caused by imported food appeared to rise in 2009 and 2010, and nearly half of the outbreaks, associated with imported food, implicated foods imported from areas which previously had not been associated with outbreaks. Projecting supply chains into new geographical regions raises serious questions about the capacity of the new supply chain partners to provide the requisite regulatory framework and sufficiently robust public health measures for ensuring the safety of the foods and foodstuffs offered for international trade. The laws, regulation and legislation among the many nations participating in the global food trade are, at best, inconsistent. These inconsistencies frequently give rise to trade disputes and cause large quantities of food to be at risk of destruction on the often dubious pretext that they are not safe. Food safety is often viewed through a political or normative lens. Often as not, this lens has been wrought absent scientific precision. Harmonization of food safety legislation around sound scientific principles, as advocated by the US Food Safety Modernization Act (FSMA), would ultimately promote trade and likely provide for incremental improvement in public health. Among the priority roles of most national governments are the advancement of commerce and trade, preservation of public health and ensuring domestic tranquility. Achieving these priorities is fundamental to creating and preserving the wealth of nations. Countries such as the Netherlands, Canada, Germany, Japan and the USA

Safety of Animal Fats for Biodiesel Production: A Critical Review of Literature

Energy Technology Data Exchange (ETDEWEB)

Greene, A; Dawson, P; Nixon, D; Atkins, J; Pearl, G [Clemson University, SC (United States)

2007-05-15

An in-depth review of available literature was conducted on the safety of using animal fats for biodiesel. The review indicated little or no known risk to human and animal health and to the environment relative to inherent microbial, organic or inorganic agents in animal fats destined for biodiesel production. Animal by-products are generated from the inedible tissues derived from meat, poultry and fish production. This material is thermally processed by the rendering industry to generate a number of industrial materials including use of the fat portion to produce biodiesel. As the biodiesel industry continues to develop, questions have emerged about the safety of animal versus vegetable fats for biodiesel production and utilization. The following report is the result of a detailed literature search into the potential microbial, organic, and inorganic contaminants that may be present in animal fats and the potential for human or environmental safety issues associated with each. The potential safety risks associated with prions are discussed in a separate report, 'Biodiesel from Specified Risk Material Tallow: An Appraisal of TSE Risks and their Reduction'. In certain instances, very little was reported about the potential contaminating moiety and its fate in biodiesel production and usage. Establishing an absolute zero risk assessment is impossible on any fat utilized for biodiesel production. Among the potential microbial contaminants, bacteria, viruses, fungi, yeast, parasites, and microbial toxins were considered. In each instance, the nature of the production process and usage of biodiesel via combustion reduce the possibility that microbial contaminants would be a cause for concern to humans, animals, or the environment. Potential organic moieties contaminating the fat should meet a similar fate. Current evidence suggests that metals and metalloids within animal fats will not cause significant safety issues in the production and use of rendered fat

Safety of Animal Fats for Biodiesel Production: A Critical Review of Literature

Energy Technology Data Exchange (ETDEWEB)

Greene, A.; Dawson, P.; Nixon, D.; Atkins, J.; Pearl, G. [Clemson University, SC (United States)

2007-05-15

An in-depth review of available literature was conducted on the safety of using animal fats for biodiesel. The review indicated little or no known risk to human and animal health and to the environment relative to inherent microbial, organic or inorganic agents in animal fats destined for biodiesel production. Animal by-products are generated from the inedible tissues derived from meat, poultry and fish production. This material is thermally processed by the rendering industry to generate a number of industrial materials including use of the fat portion to produce biodiesel. As the biodiesel industry continues to develop, questions have emerged about the safety of animal versus vegetable fats for biodiesel production and utilization. The following report is the result of a detailed literature search into the potential microbial, organic, and inorganic contaminants that may be present in animal fats and the potential for human or environmental safety issues associated with each. The potential safety risks associated with prions are discussed in a separate report, 'Biodiesel from Specified Risk Material Tallow: An Appraisal of TSE Risks and their Reduction'. In certain instances, very little was reported about the potential contaminating moiety and its fate in biodiesel production and usage. Establishing an absolute zero risk assessment is impossible on any fat utilized for biodiesel production. Among the potential microbial contaminants, bacteria, viruses, fungi, yeast, parasites, and microbial toxins were considered. In each instance, the nature of the production process and usage of biodiesel via combustion reduce the possibility that microbial contaminants would be a cause for concern to humans, animals, or the environment. Potential organic moieties contaminating the fat should meet a similar fate. Current evidence suggests that metals and metalloids within animal fats will not cause significant safety issues in the production and use of rendered fat

Safety performance assessment of food industry facilities using a fuzzy approach

Directory of Open Access Journals (Sweden)

F. Barreca

2013-09-01

Full Text Available The latest EU policies focus on the issue of food safety with a view to assuring adequate and standard quality levels for the food produced and/or consumed within the EC. To that purpose, the environment where agricultural products are manufactured and processed plays a crucial role in achieving food hygiene. As a consequence, it is of the utmost importance to adopt proper building solutions which meet health and hygiene requirements and to use suitable tools to measure the levels achieved. Similarly, it is necessary to verify and evaluate the level of safety and welfare of the workers in their working environment. The safety of the workers has not only an ethical and social value but also an economic implication, since possible accidents or environmental stressors are the major causes of the lower efficiency and productivity of workers. However, the technical solutions adopted in the manufacturing facilities in order to achieve adequate levels of safety and welfare of the workers are not always consistent with the solutions aimed at achieving adequate levels of food hygiene, even if both of them comply with sectoral rules which are often unconnected with each other. Therefore, it is fundamental to design suitable models of analysis that allow assessing buildings as a whole, taking into account both health and hygiene safety as well as the safety and welfare of workers. Hence, this paper proposes an evaluation model that, based on an established study protocol and on the application of a fuzzy logic procedure, allows evaluating the global safety level of a building. The proposed model allows to obtain a synthetic and global value of the building performance in terms of food hygiene and safety and welfare of the workers as well as to highlight possible weaknesses. Though the model may be applied in either the design or the operational phase of a building, this paper focuses on its application to certain buildings already operational in a specific

Veterinary education on fostering food safety and governance achieving a healthy nation in Bangladesh

Directory of Open Access Journals (Sweden)

M. Mufizur Rahman

2013-08-01

Full Text Available Since veterinary medicine plays an important role in assuring a nation's food safety, therefore the present status of our food safety, where large numbers of consumers in Bangladesh have become victims of consuming adulterated foods, needs to be enhanced and governed by the guideline of veterinary and public health educators. This article highlights the need of an integrated collaborative approach between academicians and government officials for the creation and dissemination of food-safety teaching driving force to mitigate food borne diseases, ensure food safety, control mischievous and fraudulent adulteration – all destined to a harmonious national health strategic action plan. Veterinary education is very effective for cor- rect implementation of the stable to table concept and best serves the public when it is updated on current market needs of food products and measures protecting animal health. Universities in Europe and USA have adjusted their veterinary medicine curricula during the past few years. Experts predicted determinant changes by 2020 that would influence the work of the veterinarians. All of them are in favor of placing food quality and food safety and public health as the highest priorities in future veterinary education. In Bangladesh, Universities and Veterinary Colleges are producing qualified Veterinary Food Hygienists to deal with matters of health and demands for consumers’ food protection. The veterinary education blends veterinarians with strong capacity to advocate the assurance of food quality and safety from farm to fork. Government in collaboration with veterinary food hygienist should advocate academic and field covered sciencebased food safety system. It is hoped that in the near future Bangladesh will come forward with veterinary public health responsibilities incorporated in national food safety program. The concerned authorities in collaboration with international public health authority like WHO should

European Legal Developments in Product Liability and Product Safety and the Total Quality Management Approach

NARCIS (Netherlands)

Brack, Antoni; Gieskes, J.F.B.

1990-01-01

The purpose of this paper is to show that Product Liability (PL) and Product Safety (PS) are relevant categories in terms of the Total Quality Management literature. From a societal point of view PL and PS are two sides of a coin. The effects of the PL and PS regulation on companies are described

The importance of safety in achieving the widespread use of hydrogen as a fuel

Energy Technology Data Exchange (ETDEWEB)

Edeskuty, F.J. [Los Alamos National Laboratory, Los Alamos, NM (United States)

1998-07-01

The advantages of hydrogen fuel have been adequately demonstrated on numerous occasions. However, two major disadvantages have prevented any significant amount of corresponding development. These disadvantages have been in the economics of producing sufficient quantities of hydrogen and in the safety (both real and perceived) of its use. To date, work has mostly been properly centered on solving the economic problems. However, a greater effort on the safety of new hydrogen systems now being proposed also deserves consideration. To achieve the greatest safety in the expansion of the use of hydrogen into its wide-spread use as a fuel, attention must be given to four considerations. These are, obtaining knowledge of all the physical principles involved in the new uses, using that knowledge to put in place the regulations that allow the safe interfacing of the new systems, designing and constructing the new systems with safety in mind, and the training of the large number of people that will become the handlers of the hydrogen. Existing organizations that produce, transport, or use hydrogen on a large scale have an excellent safety record. This safety record comes as a consequence of dedicated attention to the above-mentioned principle. However, where these principles were not closely followed, accidents have resulted. Some examples are cited. As the use of hydrogen becomes more wide-spread, there must be a mechanism for assuring the universal application of these principles. Larger and more numerous fleet operations with hydrogen fuel may be the best way to begin the indoctrination of the general public to the more general use of hydrogen fuel. Demonstrated safe operation with hydrogen is vital to its final acceptance as the fuel of choice. 18 refs.

Impact of rent-seeking on productivity in Chinese coal mine safety supervision: A simulation study

International Nuclear Information System (INIS)

Chen, Hong; Feng, Qun; Zhu, Dandan; Han, Shuai; Long, Ruyin

2016-01-01

During the “golden decade” (2001–2011) of the coal industry in China, rent-seeking increased in coal mine safety supervision alongside significant improvements in coal mine safety status and increased economic benefits in the coal industry. To explore this internal relationship, we developed a Matlab simulation system and simulated the impact of rent-seeking from each level of the supervision department on coal mine productivity in different scenarios. The results showed the following. (1) Rent-seeking had no significant influence on the average level of material productivity but it had an adverse effect on the average level of mental productivity. Due to the effects of rent-seeking, productivity tended to exhibit unstable and destructive fluctuations, and rent-seeking had the dual effect of promoting and restraining productivity in a wide range with a high frequency. (2) In the supervision scenario, supervision by the high-level department was efficient, and productivity was promoted more by the national and provincial supervision department. (3) In the rent-seeking scenario, each level of the department had an intensity threshold above which coal mine accidents occurred. We also propose suggestions that focuses on the improved supervision of Chinese coal mine safety in three areas based on the “new normal” safety concept. - Highlights: •We discussed rent-seeking behavior in Chinese coal mine safety supervision. •We explored the characteristics of coal mine productivity. •We investigated the impact of rent-seeking on coal mine productivity in three scenarios. •We found rent-seeking led to great fluctuations in productivity with a dual effect. •We proposed a model strategy for Chinese coal mine safety supervision in three areas.

National Culture, Creativity, and Productivity: What's the Relationship with Student Achievement?

Science.gov (United States)

Fang, Zheng; Xu, Xianxuan; Grant, Leslie W.; Stronge, James H.; Ward, Thomas J.

2016-01-01

Using Hofstede's culture dimensions and World Values Survey (WVS) dimensions, the study uses a series of multiple regressions to explore the relationship among national culture, creativity as measured by patents, economic productivity as measured by gross domestic product per capita, and student achievement as measured by Trends in International…

Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

NARCIS (Netherlands)

Ham, J.M.

1996-01-01

A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

Toward an understanding of the impact of production pressure on safety performance in construction operations.

Science.gov (United States)

Han, Sanguk; Saba, Farzaneh; Lee, Sanghyun; Mohamed, Yasser; Peña-Mora, Feniosky

2014-07-01

It is not unusual to observe that actual schedule and quality performances are different from planned performances (e.g., schedule delay and rework) during a construction project. Such differences often result in production pressure (e.g., being pressed to work faster). Previous studies demonstrated that such production pressure negatively affects safety performance. However, the process by which production pressure influences safety performance, and to what extent, has not been fully investigated. As a result, the impact of production pressure has not been incorporated much into safety management in practice. In an effort to address this issue, this paper examines how production pressure relates to safety performance over time by identifying their feedback processes. A conceptual causal loop diagram is created to identify the relationship between schedule and quality performances (e.g., schedule delays and rework) and the components related to a safety program (e.g., workers' perceptions of safety, safety training, safety supervision, and crew size). A case study is then experimentally undertaken to investigate this relationship with accident occurrence with the use of data collected from a construction site; the case study is used to build a System Dynamics (SD) model. The SD model, then, is validated through inequality statistics analysis. Sensitivity analysis and statistical screening techniques further permit an evaluation of the impact of the managerial components on accident occurrence. The results of the case study indicate that schedule delays and rework are the critical factors affecting accident occurrence for the monitored project. Copyright © 2013 Elsevier Ltd. All rights reserved.

Construction of Traceability System for Quality Safety of Cereal and Oil Products

Science.gov (United States)

Zheng, Huoguo; Liu, Shihong; Meng, Hong; Hu, Haiyan

After several significant food safety incident, global food industry and governments in many countries are putting increasing emphasis on establishment of food traceability systems. Food traceability has become an effective way in food quality and safety management. The traceability system for quality safety of cereal and oil products was designed and implemented with HACCP and FMECA method, encoding, information processing, and hardware R&D technology etc, according to the whole supply chain of cereal and oil products. Results indicated that the system provide not only the management in origin, processing, circulating and consuming for enterprise, but also tracing service for customers and supervisor by means of telephone, internet, SMS, touch machine and mobile terminal.

Relationships among School Climate, School Safety, and Student Achievement and Well-Being: A Review of the Literature

Science.gov (United States)

Kutsyuruba, Benjamin; Klinger, Don A.; Hussain, Alicia

2015-01-01

School climate, safety and well-being of students are important antecedents of academic achievement. However, school members do not necessarily experience school climate in the same way; rather, their subjective perceptions of the environment and personal characteristics influence individual outcomes and behaviours. Therefore, a closer look at the…

Understanding safety and production risks in rail engineering planning and protection.

Science.gov (United States)

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

Executing effective road safety advertising: are big production budgets necessary?

Science.gov (United States)

Donovan, R J; Jalleh, G; Henley, N

1999-05-01

Twelve (12) road safety television commercials (TVCs) ranging in production costs from $A15,000 to $A250,000 (current prices) were evaluated using standard advertising pre-test procedures. The twelve ads covered four road safety behaviours (speeding; drink driving; fatigue; and inattention), and included a variety of executional types within and across behaviours. One ad in each of the four behaviours was an expensive TAC and ($A200,000 or more). The testing procedure assessed respondents' self-reported impact of the ad on their future intentions to comply with the road safety behavior advocated in the ad. Just under 1000 appropriately screened motor vehicle drivers license holders were recruited via street intercept methods and randomly allocated to one of the twelve and exposure conditions. The results showed that while the two best performing ads were highly dramatic TAC ads showing graphic crash scenes, these were also the most expensive ads to produce, and, being 60 and 90 s, the most expensive to air. In several cases, 30 s low cost talking heads testimonials performed equally as well as their far more expensive counterparts. We conclude that big production budgets may not be necessary to create effective road safety advertising.

The balance between safety and productivity and its relationship with human factors and safety awareness and communication in aircraft manufacturing

NARCIS (Netherlands)

Karanikas, N.; Melis, Damien Jose; Kourousis, Kyriakos

2017-01-01

Background: This paper presents the findings of a pilot research survey which assessed the degree of balance between safety and productivity, and its relationship with awareness and communication of human factors and safety rules in the aircraft manufacturing environment. Methods: The study was

Safety evaluation in the development of medical devices and combination products

CERN Document Server

Gad, Shayne C

2008-01-01

Capturing the growth of the global medical device market in recent years, this practical new guide is essential for all who are responsible for ensuring safety in the use and manufacture of medical devices. It has been extensively updated to reflect significant advances, incorporating combination products and helpful case examples of current real-life problems in the field.The Third Edition explores these key current trends:global device marketscontinually advancing technologythe increasing harmonization of device safety regulation worldwideEach aspect of safety evaluation is considered in ter

Improving food safety in the supply chain: Integrating traceability in production and distribution planning

DEFF Research Database (Denmark)

Grunow, Martin; Rong, Aiying; Akkerman, Renzo

2008-01-01

on production and distribution planning. Here, we develop a methodology for production and distribution planning in food supply chains which minimizes production and logistics costs and at the same time reduces food safety concerns, limits the size of potential recalls, and satisfies product quality...... with traceability from the viewpoint of information system development and technology development such as radio frequency identification (RFID) and DNA-based techniques. However, traceability and its implications for food safety are thus far not incorporated in the standard operations management literature...

Achieving a More Sustainable Process Design for the Production of Methanol

DEFF Research Database (Denmark)

Plaza, Cristina Calvera; Gonzalez Garcia, Marta; Callau, Ana Diez

Methanol is an important chemical product because it can be used as a raw material for the production of other chemicals (1), for example dimethyl carbonate, formaldehyde and methyl tert-butyl ether and it is also one of the most produced bulk chemicals with an annual global production of 100...... million metric tonnes per year (1). Methanol can be produced using different reaction paths, for example natural gas. If natural gas is used for methanol production then CO2 is produced, utilized and can be emitted. Therefore, achieving a more sustainable design for the production of methanol...

Construction of the All-region Linkage System for Emergency Management of Agricultural Product Quality and Safety in West China

Institute of Scientific and Technical Information of China (English)

Hua; YU; Yanbin; QI; Yubao; YAN

2013-01-01

Quality and safety of agricultural products are significant for national socioeconomic development,sustainable development,and vital interests of people.To safeguard quality and safety of agricultural products in west China is to safeguard economic safety and ecological safety of the country,public health and social stability,of which an important task is to properly handle emergencies concerning quality and safety of agricultural products.Considering actual conditions of west China,suggestions are given to construct the all-region linkage system for emergency management of agricultural product quality and safety in the local area,enhance the all-region linkage,and improve the linkage efficiency.

Safety and efficacy of Labisia pumila containing products

Directory of Open Access Journals (Sweden)

Muhammad Syafiq Saleh

2016-01-01

Full Text Available Labisia pumila is a traditional medicinal plant which has wide therapeutic application including induction of labor and treatment of dysentery, dysmenorrhea and gonorrhea. We aimed for systematic review of the efficacy andsafety of L. pumila extract or its other commercial products availabe in Malaysian market. The marketed 500 mg capsule is composed of 40 mg L. pumila, 10 mg C. caudatum extract and 450 mg excipient. The commercial products did not follow the registration guidelines of Malaysian National Pharmaceutical Control Bureau (NPCB and advertisement guidelines of Malaysian Advertisement Board. Randomized, placebo controlled clinical trials reported the safe consumpotion of L. pumila water extract on postmanoposal women. Information on the efficacy and safety of commercial products are not sufficiently available. Many unregistered products (mostly capsule form are flooded in Malaysian market without having scientific information. Consumption of those products may seriously impair the health of the people.

16 CFR 1115.5 - Reporting of failures to comply with a voluntary consumer product safety standard relied upon by...

Science.gov (United States)

2010-01-01

... voluntary consumer product safety standard relied upon by the Commission under section 9 of the CPSA. 1115.5 Section 1115.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.5 Reporting of failures to comply...

Safety and efficacy of personal care products containing colloidal oatmeal

OpenAIRE

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Maryline Criquet,1 Romain Roure,1 Liliane Dayan,2 Virginie Nollent,1 Christiane Bertin11Johnson & Johnson Santé Beauté France, Issy les Moulineaux, 2Independent consultant dermatologist, Paris, FranceBackground: Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vu...

Safety assessment for the IS process in a hydrogen production facility

International Nuclear Information System (INIS)

Cho, Nam Chul

2005-08-01

A substitute energy development have been required due to the dry up of the fossil fuel and an environmental problem. Consequently, among substitute energy to be discussed, producing hydrogen from water which does not release carbon is a very promising technology. Also, Iodine-Sulfur(IS) thermochemical water decomposition is one of the promising process which is used to produce hydrogen efficiently using the high temperature gas-cooled reactor(HTGR) as an energy source that is possible to supply heat over 1000 .deg. C. In this study, to make a safety assessment of the hydrogen production using the IS process, an initiating events analysis and an accident scenario modeling considering the relief system were carried out. A method for initiating event identification used the Master Logic Diagram(MLD) that is logical and deductive. As a result, 9 initiating events that cause a leakage of the chemical material were identified. 6 accident scenario based on the initiating event are identified and quantified to the event trees. The frequency of the chemical material leakage produced by IS process is estimated relatively high to the value of 1.22x10 -4 /y. Therefore, it requires more effort on safety of the hydrogen production which can be considered as a part of the nuclear system and safety management research to increase social acceptability. Moreover, these methods will be helpful to the safety assessment of the hydrogen production system of the IS process in general

System safety education focused on flight safety

Science.gov (United States)

Holt, E.

1971-01-01

The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

The Joint Convention on the safety of spent fuel management and on the safety of radioactive waste management. An instrument to achieve a global safety

International Nuclear Information System (INIS)

Risoluti, P.

2006-01-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management (the Joint Convention) is the first legally binding international treaty in the area of radioactive material management. It was adopted by a Diplomatic Conference in September 1997 and opened for signature on 29 September 1997. The Convention entered into force on 18 June 1998, and to date (May 2006) has been ratified by 41 countries. The Joint Convention applies to spent fuel and radioactive waste resulting from civilian application. Its principal aim is to achieve and maintain a high degree of safety in their management worldwide. The Convention is an incentive instrument, not designed to ensure fulfilment of obligations through control and sanction, but by a volunteer peer review mechanism. The obligations of the Contracting Parties are mainly based on the international safety standards developed by the IAEA in past decades. The Convention is of interest of all countries generating radioactive waste. Therefore it is relevant not only for those using nuclear power, but for any country where application of nuclear energy in education, agriculture, medicine and industry is currently used. Obligations of Contracting Parties include attending a Review Meeting held every three years and prepare National Reports for review by the other Contracting Parties. In the National Reports basic information on inventory and facilities for management of radioactive materials has to be provided. Countries with small nuclear power and/or research programs or countries having radioactive materials only from nuclear application on medicine, agriculture or conventional industry, can benefit from the exchange of information and the technical knowledge gained by the reporting procedure set up by the Convention. The second Review Meeting is to be held at IAEA headquarters from 15 to 26 May 2006. This paper presents the objectives and the implementation status of the Convention, the

The Trends and their Impact on Fishery Products Safety and Quality

OpenAIRE

Gheorghe Adrian ZUGRAVU; Maria Magdalena TUREK RAHOVEANU

2012-01-01

The paper follows two main objectives: to understand consumers’ perception of safety and quality of fishery products and to identify communication levers in order to improve the perceived image of fishery products. The present research is focused on the fishery products, regardless of their presentation – fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers’ perception toward fishery products. The empirical study with brands indicated that consumers ar...

Renewable Acrylonitrile Production

Energy Technology Data Exchange (ETDEWEB)

Beckham, Gregg T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Karp, Eric M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eaton, Todd R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sanchez i Nogue, Violeta [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vorotnikov, Vassili [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Biddy, Mary J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tan, Eric C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brandner, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Manker, Lorenz [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Michener, William E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vardon, Derek R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bratis, Adam D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Liu, Rongming [University of Colorado; Gill, Ryan T. [University of Colorado; Gilhespy, Michelle [Johnson Matthey Technology Centre; Skoufa, Zinovia [Johnson Matthey Technology Centre; Watson, Michael J. [Johnson Matthey Technology Centre; Fruchey, O. Stanley [MATRIC; Cywar, Robin M. [Formerly NREL

2017-12-08

Acrylonitrile (ACN) is a petroleum-derived compound used in resins, polymers, acrylics, and carbon fiber. We present a process for renewable ACN production using 3-hydroxypropionic acid (3-HP), which can be produced microbially from sugars. The process achieves ACN molar yields exceeding 90% from ethyl 3-hydroxypropanoate (ethyl 3-HP) via dehydration and nitrilation with ammonia over an inexpensive titanium dioxide solid acid catalyst. We further describe an integrated process modeled at scale that is based on this chemistry and achieves near-quantitative ACN yields (98 +/- 2%) from ethyl acrylate. This endothermic approach eliminates runaway reaction hazards and achieves higher yields than the standard propylene ammoxidation process. Avoidance of hydrogen cyanide as a by-product also improves process safety and mitigates product handling requirements.

Reusing salad from salad bars – simulating the effects on product loss, microbial safety and product quality

NARCIS (Netherlands)

Tromp, S.O.; Rijgersberg, H.; Franz, E.

2012-01-01

The goal of this study is to model the effects of reusing salad from salad bars to reduce product loss, while keeping microbial safety and product quality at acceptable levels. We, therefore, expand our previously developed simulation model by incorporating reuse strategies and a quality decay

Radiation protection and nuclear safety - achievements and the way ahead for ARPANSA

International Nuclear Information System (INIS)

Loy, J.

2001-01-01

Australian Radiation Protection and Nuclear Safety Agency (ARPANSA), a fully independent legislative and regulatory agency, was announced in 1997, but formally came into existence in 1999. The first stage of its development as a regulator was guiding Commonwealth users of radiation sources and nuclear facilities through making licence applications. Assessing licences was complex, including because of the need to work with the public submission process for nuclear facilities. This presentation will briefly outline the legislative framework and the regulatory arrangements that were instrumental in the creation of ARPANSA and discusses at length the implementation phase and achievements to date. The Commonwealth jurisdiction differs from the States - ARPANSA's challenge is now to learn how to move to the surveillance and audit stage of licensing

Safety and clinical efficacy of some radiation-sterilized medical products and pharmaceuticals

International Nuclear Information System (INIS)

Kulkarni, R.D.; Gopal, N.G.S.

1975-01-01

Medical products and pharmaceuticals must conform to certain minimum physico-chemical microbiological and biological requirements. The biological requirements comprise principally testing for toxicity, safety, and pyrogens. Besides the above-mentioned criteria, there are two other important characteristics, viz. clinical efficacy and tolerance in animal and/or human beings. These latter requirements, expected from the final product released for general human use, are not carried out routinely. In the present-day pharmaceutical and medical technology, numerous mew products are appearing, many of them requiring radiation sterilization as they are not stable towards the other conventional methods of sterilization. While the post-irradiation physicochemical changes in a product may not be significant, the bio-availability or biological activity of the product may be affected to a more significant extent. Some evidence of this has recently been reported. Hence, it is desirable to carry out studies on safety as well as clinical efficacy on irradiated products. This paper describes some studies on plastic-based medical products, a pharmaceutical raw material, a typical infusion fluid such as normal saline, antibiotics and their ointments. (author)

Playground Safety

Science.gov (United States)

... Prevention Fall Prevention Playground Safety Poisoning Prevention Road Traffic Safety Sports Safety Get Email Updates To receive ... at the Consumer Product Safety Commission’s Playground Safety website . References U.S. Consumer Product Safety Commission. Injuries and ...

Dynamic modeling of the tradeoff between productivity and safety in critical engineering systems

International Nuclear Information System (INIS)

Cowing, Michelle M.; Elisabeth Pate-Cornell, M.; Glynn, Peter W.

2004-01-01

Short-term tradeoffs between productivity and safety often exist in the operation of critical facilities such as nuclear power plants, offshore oil platforms, or simply individual cars. For example, interruption of operations for maintenance on demand can decrease short-term productivity but may be needed to ensure safety. Operations are interrupted for several reasons: scheduled maintenance, maintenance on demand, response to warnings, subsystem failure, or a catastrophic accident. The choice of operational procedures (e.g. timing and extent of scheduled maintenance) generally affects the probabilities of both production interruptions and catastrophic failures. In this paper, we present and illustrate a dynamic probabilistic model designed to describe the long-term evolution of such a system through the different phases of operation, shutdown, and possibly accident. The model's parameters represent explicitly the effects of different components' performance on the system's safety and reliability through an engineering probabilistic risk assessment (PRA). In addition to PRA, a Markov model is used to track the evolution of the system and its components through different performance phases. The model parameters are then linked to different operations strategies, to allow computation of the effects of each management strategy on the system's long-term productivity and safety. Decision analysis is then used to support the management of the short-term trade-offs between productivity and safety in order to maximize long-term performance. The value function is that of plant managers, within the constraints set by local utility commissions and national (e.g. energy) agencies. This model is illustrated by the case of outages (planned and unplanned) in nuclear power plants to show how it can be used to guide policy decisions regarding outage frequency and plant lifetime, and more specifically, the choice of a reactor tripping policy as a function of the state of the

Benchmarking road safety of U.S. states: a DEA-based Malmquist productivity index approach.

Science.gov (United States)

Egilmez, Gokhan; McAvoy, Deborah

2013-04-01

In this study, a DEA based Malmquist index model was developed to assess the relative efficiency and productivity of U.S. states in decreasing the number of road fatalities. Even though the national trend in fatal crashes has reached to the lowest level since 1949 (Traffic Safety Annual Assessment Highlights, 2010), a state-by-state analysis and comparison has not been studied considering other characteristics of the holistic national road safety assessment problem in any work in the literature or organizational reports. In this study, a DEA based Malmquist index model was developed to assess the relative efficiency and productivity of 50 U.S. states in reducing the number of fatal crashes. The single output, fatal crashes, and five inputs were aggregated into single road safety score and utilized in the DEA-based Malmquist index mathematical model. The period of 2002-2008 was considered due to data availability for the inputs and the output considered. According to the results, there is a slight negative productivity (an average of -0.2 percent productivity) observed in the U.S. on minimizing the number of fatal crashes along with an average of 2.1 percent efficiency decline and 1.8 percent technological improvement. The productivity in reducing the fatal crashes can only be attributed to the technological growth since there is a negative efficiency growth is occurred. It can be concluded that even though there is a declining trend observed in the fatality rates, the efficiency of states in utilizing societal and economical resources towards the goal of zero fatality is not still efficient. More effective policy making towards increasing safety belt usage and better utilization of safety expenditures to improve road condition are derived as the key areas to focus on for state highway safety agencies from the scope of current research. Published by Elsevier Ltd.

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Science.gov (United States)

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

Fire safety requirements for electrical cables towards nuclear reactor safety

International Nuclear Information System (INIS)

Raju, M.R.

2002-01-01

Full text: Electrical power supply forms a very important part of any nuclear reactor. Power supplies have been categorized in to class I, II, III and IV from reliability point. The safety related equipment are provided with highly reliable power supply to achieve the safety of very high order. Vast network of cables in a nuclear reactor are grouped and segregated to ensure availability of power to at least one group under all anticipated occurrences. Since fire can result in failures leading to unavailability of power caused by common cause, both passive and active fire protection methods are adopted in addition to fire detection system. The paper describes the requirement for passive fire protection to electrical cables viz. fire barrier and fire breaks. The paper gives an account of the tests required to standardize the products. Fire safety implementation for cables in research reactors is described

UPSAT guidelines. 1996 edition. Reference document for IAEA Uranium Productions Safety Assessment Teams (UPSATs)

International Nuclear Information System (INIS)

1996-05-01

The IAEA Uranium Production Safety Assessment Team (UPSAT) programme provides advice and assistance to Member States to enhance the safety and environmental performance of uranium production facilities during construction, commissioning and operation. Sound design and construction are prerequisite for the safe and environmentally responsible operation of uranium mines and mills. However, the safety of the facility depends ultimately on sound policies, procedures and practices; on the capability and reliability of the construction, commissioning and operating personnel; on comprehensive instructions; and on adequate resources. A positive attitude and conscientiousness on the part of the management and staff in discharging their responsibilities is important to safety. The UPSAT guidelines have been developed in the following areas: (1) management, organization and administration; (2) training and qualification; (3) operation (4) maintenance; (5) safety, fire protection, emergency planning, and preparedness; (6) radiation protection; (7) environmental monitoring programme; (8) construction management; (9) commissioning and decommissioning

Management of safety, safety culture and self assessment

International Nuclear Information System (INIS)

Carnino, A.

2000-01-01

Safety management is the term used for the measures required to ensure that an acceptable level of safety is maintained throughout the life of an installation, including decommissioning. The safety culture concept and its implementation are described in part one of the paper. The principles of safety are now quite well known and are implemented worldwide. It leads to a situation where harmonization is being achieved as indicated by the entry into force of the Convention on Nuclear Safety. To go beyond the present nuclear safety levels, management of safety and safety culture will be the means for achieving progress. Recent events which took place in major nuclear power countries have shown the importance of the management and the consequences on safety. At the same time, electricity deregulation is coming and will impact on safety through reductions in staffing and in operation and maintenance cost at nuclear installations. Management of safety as well as its control and monitoring by the safety authorities become a key to the future of nuclear energy.(author)

Patient Drug Safety Reporting: Diabetes Patients' Perceptions of Drug Safety and How to Improve Reporting of Adverse Events and Product Complaints.

Science.gov (United States)

Patel, Puja; Spears, David; Eriksen, Betina Østergaard; Lollike, Karsten; Sacco, Michael

2018-03-01

Global health care manufacturer Novo Nordisk commissioned research regarding awareness of drug safety department activities and potential to increase patient feedback. Objectives were to examine patients' knowledge of pharmaceutical manufacturers' responsibilities and efforts regarding drug safety, their perceptions and experiences related to these efforts, and how these factors influence their thoughts and behaviors. Data were collected before and after respondents read a description of a drug safety department and its practices. We conducted quantitative survey research across 608 health care consumers receiving treatment for diabetes in the United States, Germany, United Kingdom, and Italy. This research validated initial, exploratory qualitative research (across 40 comparable consumers from the same countries) which served to guide design of the larger study. Before reading a drug safety department description, 55% of respondents were unaware these departments collect safety information on products and patients. After reading the description, 34% reported the department does more than they expected to ensure drug safety, and 56% reported "more confidence" in the industry as a whole. Further, 66% reported themselves more likely to report an adverse event or product complaint, and 60% reported that they were more likely to contact a drug safety department with questions. The most preferred communication methods were websites/online forums (39%), email (27%), and telephone (25%). Learning about drug safety departments elevates consumers' confidence in manufacturers' safety efforts and establishes potential for patients to engage in increased self-monitoring and reporting. Study results reveal potentially actionable insights for the industry across patient and physician programs and communications.

77 FR 51912 - Safety Zone; Tom Lyons Productions Fireworks, Long Island Sound, Sands Point, NY

Science.gov (United States)

2012-08-28

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket Number USCG-2012-0618] RIN 1625-AA00 Safety Zone; Tom Lyons Productions Fireworks, Long Island Sound, Sands Point, NY AGENCY.... 165.T01-0618 to read as follows: Sec. 165.T01-0618 Safety Zone; Tom Lyons Productions Fireworks, Long...

Re-engineering of Products and Processes How to Achieve Global Success in the Changing Marketplace

CERN Document Server

Rotini, Federico; Cascini, Gaetano

2012-01-01

Whilst previous methods for business process re-engineering have focused on time and cost reduction policies to preserve competitive services and products, Re-engineering of Products and Processes: How to Achieve Global Success in the Changing Marketplace presents a new approach which aims to include aspects that impact the customer perceived value. This method supports business re-engineering initiatives by identifying process bottlenecks as well as new products and services available to overcome market competition. This original approach is described step-by-step, explaining the theory through examples of performable tasks and the selection of relevant tools according to the nature of the problem. Supported by illustrations, tables and diagrams, Re-engineering of Products and Processes: How to Achieve Global Success in the Changing Marketplace clearly explains a method which is then applied to several case studies across different industrial sectors. Re-engineering of Products and Processes: How to Achieve...

Modeling issues associated with production reactor safety assessment

International Nuclear Information System (INIS)

Stack, D.W.; Thomas, W.R.

1990-01-01

This paper describes several Probabilistic Safety Assessment (PSA) modeling issues that are related to the unique design and operation of the production reactors. The identification of initiating events and determination of a set of success criteria for the production reactors is of concern because of their unique design. The modeling of accident recovery must take into account the unique operation of these reactors. Finally, a more thorough search and evaluation of common-cause events is required to account for combinations of unique design features and operation that might otherwise not be included in the PSA. It is expected that most of these modeling issues also would be encountered when modeling some of the other more unique reactor and nonreactor facilities that are part of the DOE nuclear materials production complex. 9 refs., 2 figs

Evolution of approaches to viral safety issues for biological products.

Science.gov (United States)

Lubiniecki, Anthony S

2011-01-01

CONFERENCE PROCEEDING Proceedings of the PDA/FDA Adventitious Viruses in Biologics: Detection and Mitigation Strategies Workshop in Bethesda, MD, USA; December 1-3, 2010 Guest Editors: Arifa Khan (Bethesda, MD), Patricia Hughes (Bethesda, MD) and Michael Wiebe (San Francisco, CA) Approaches to viral safety issues for biological products have evolved during the past 50+ years. The first cell culture products (viral vaccines) relied largely on the use of in vitro and in vivo virus screening assays that were based upon infectivity of adventitious viral agents. The use of Cohn fractionation and pasteurization by manufacturers of plasma derivatives introduced the concepts that purification and treatment with physical and chemical agents could greatly reduce the risk of viral contamination of human albumin and immunoglobulin products. But the limitations of such approaches became clear for thermolabile products that were removed early in fractionation such as antihemophilic factors, which transmitted hepatitis viruses and HIV-1 to some product recipients. These successes and limitations were taken into account by the early developers of recombinant DNA (rDNA)-derived cell culture products and by regulatory agencies, leading to the utilization of cloning technology to reduce/eliminate contamination due to human viruses and purification technologies to physically remove and inactivate adventitious and endogenous viruses, along with cell banking and cell bank characterization for adventitious and endogenous viruses, viral screening of biological raw materials, and testing of cell culture harvests, to ensure virus safety. Later development and incorporation of nanofiltration technology in the manufacturing process provided additional assurance of viral clearance for safety of biotechnology products. These measures have proven very effective at preventing iatrogenic infection of recipients of biotechnology products; however, viral contamination of production cell cultures has

A Review of the Poultry Meat Production Industry for Food Safety in Indonesia

Science.gov (United States)

Wahyono, N. D.; Utami, M. M. D.

2018-01-01

Poultry meat is an indispensable source of animal protein in human growth and development, so it is in great demand by people all over the world. Poultry meat has several advantages, namely the quality of nutrition is good enough, delicious taste, relatively affordable price, easy to get and accepted all levels of society with diverse backgrounds. The era of globalization requires competitive products, such as chicken meat in Indonesia, the current chicken meat industry is not only based on high production capacity and decreased production costs but also chicken products are safe to eat. As a consequence of trade liberalization, the poultry industry faces the threat of competition with cheaper products with better quality. The food safety of chicken meat starts from the farm, processing process until consumed. Food safety is a requirement of food products that must be handled by involving government, industry and consumers.

The R and D issues necessary to achieve the safety design of commercialized liquid-metal cooled fast reactors

International Nuclear Information System (INIS)

Shoji, Kotake; Koji, Dozaki; Shigenobu, Kubo; Yoshio, Shimakawa; Hajime, Niwa; Masakazu, Ichimiya

2002-01-01

Within the framework of the feasibility study on commercialized fast reactor cycle systems (hereafter described as F/S), the safety design principle is investigated and several kinds of design studies are now in progress. Among the designs for liquid-metal cooled fast reactor (LMR), the advanced loop type sodium cooled fast reactor (FR) is one of the promising candidate as future commercialized LMR. In this paper, the safety related research and development (R and D) issues necessary to achieve the safety design are described along the defence-in-depth principle, taking account of not only the system characteristics of the advanced loop concepts but also design studies and R and D experiences so far. Safety issues related to the hypothetical core disruptive accidents (CDA) are emphasized both from the prevention and mitigation. A re-criticality free core concept with a special fuel assembly is pursued by performing both analytical and experimental efforts, in order to realize the rational design and to establish easy-to-understand safety logic. Sodium related issues are also given to ensure plant availability and to enhance the acceptability to the public. (authors)

Basic principles on the safety evaluation of the HTGR hydrogen production system

International Nuclear Information System (INIS)

Ohashi, Kazutaka; Nishihara, Tetsuo; Tazawa, Yujiro; Tachibana, Yukio; Kunitomi, Kazuhiko

2009-03-01

As HTGR hydrogen production systems, such as HTTR-IS system or GTHTR300C currently being developed by Japan Atomic Energy Agency, consists of nuclear reactor and chemical plant, which are without a precedent in the world, safety design philosophy and regulatory framework should be newly developed. In this report, phenomena to be considered and events to be postulated in the safety evaluation of the HTGR hydrogen production systems were investigated and basic principles to establish acceptance criteria for the explosion and toxic gas release accidents were provided. Especially for the explosion accident, quantitative criteria to the reactor building are proposed with relating sample calculation results. It is necessary to treat abnormal events occurred in the hydrogen production system as an 'external events to the nuclear plant' in order to classify the hydrogen production system as no-nuclear facility' and basic policy to meet such requirement was also provided. (author)

Achieving reasonable conservatism in nuclear safety analyses

International Nuclear Information System (INIS)

Jamali, Kamiar

2015-01-01

In the absence of methods that explicitly account for uncertainties, seeking reasonable conservatism in nuclear safety analyses can quickly lead to extreme conservatism. The rate of divergence to extreme conservatism is often beyond the expert analysts’ intuitive feeling, but can be demonstrated mathematically. Too much conservatism in addressing the safety of nuclear facilities is not beneficial to society. Using certain properties of lognormal distributions for representation of input parameter uncertainties, example calculations for the risk and consequence of a fictitious facility accident scenario are presented. Results show that there are large differences between the calculated 95th percentiles and the extreme bounding values derived from using all input variables at their upper-bound estimates. Showing the relationship of the mean values to the key parameters of the output distributions, the paper concludes that the mean is the ideal candidate for representation of the value of an uncertain parameter. The mean value is proposed as the metric that is consistent with the concept of reasonable conservatism in nuclear safety analysis, because its value increases towards higher percentiles of the underlying positively skewed distribution with increasing levels of uncertainty. Insensitivity of the results to the actual underlying distributions is briefly demonstrated. - Highlights: • Multiple conservative assumptions can quickly diverge into extreme conservatism. • Mathematics and attractive properties provide basis for wide use of lognormal distribution. • Mean values are ideal candidates for representation of parameter uncertainties. • Mean values are proposed as reasonably conservative estimates of parameter uncertainties

The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery

OpenAIRE

Toomey, Paul G.; Ross, Sharona B.; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael; Rosemurgy, Alexander S.

2015-01-01

Background and Objectives: As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. Methods: LESS surgery courses th...

Standards in reliability and safety engineering

International Nuclear Information System (INIS)

O'Connor, Patrick

1998-01-01

This article explains how the highest 'world class' levels of reliability and safety are achieved, by adherence to the basic principles of excellence in design, production, support and maintenance, by continuous improvement, and by understanding that excellence and improvement lead to reduced costs. These principles are contrasted with the methods that have been developed and standardised, particularly military standards for reliability, ISO9000, and safety case regulations. The article concludes that the formal, standardised approaches are misleading and counterproductive, and recommends that they be replaced by a philosophy based on the realities of human performance

[Storage of plant protection products in farms: minimum safety requirements].

Science.gov (United States)

Dutto, Moreno; Alfonzo, Santo; Rubbiani, Maristella

2012-01-01

Failure to comply with requirements for proper storage and use of pesticides in farms can be extremely hazardous and the risk of accidents involving farm workers, other persons and even animals is high. There are still wide differences in the interpretation of the concept of "securing or making safe", by workers in this sector. One of the critical points detected, particularly in the fruit sector, is the establishment of an adequate storage site for plant protection products. The definition of "safe storage of pesticides" is still unclear despite the recent enactment of Legislative Decree 81/2008 regulating health and work safety in Italy. In addition, there are no national guidelines setting clear minimum criteria for storage of plant protection products in farms. The authors, on the basis of their professional experience and through analysis of recent legislation, establish certain minimum safety standards for storage of pesticides in farms.

Safety assessment of personal care products/cosmetics and their ingredients

International Nuclear Information System (INIS)

Nohynek, Gerhard J.; Antignac, Eric; Re, Thomas; Toutain, Herve

2010-01-01

We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed, the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO 2 and ZnO in sunscreens. However

Safety assessment of personal care products/cosmetics and their ingredients.

Science.gov (United States)

Nohynek, Gerhard J; Antignac, Eric; Re, Thomas; Toutain, Herve

2010-03-01

We attempt to review the safety assessment of personal care products (PCP) and ingredients that are representative and pose complex safety issues. PCP are generally applied to human skin and mainly produce local exposure, although skin penetration or use in the oral cavity, on the face, lips, eyes and mucosa may also produce human systemic exposure. In the EU, US and Japan, the safety of PCP is regulated under cosmetic and/or drug regulations. Oxidative hair dyes contain arylamines, the most chemically reactive ingredients of PCP. Although arylamines have an allergic potential, taking into account the high number of consumers exposed, the incidence and prevalence of hair dye allergy appears to be low and stable. A recent (2001) epidemiology study suggested an association of oxidative hair dye use and increased bladder cancer risk in consumers, although this was not confirmed by subsequent or previous epidemiologic investigations. The results of genetic toxicity, carcinogenicity and reproductive toxicity studies suggest that modern hair dyes and their ingredients pose no genotoxic, carcinogenic or reproductive risk. Recent reports suggest that arylamines contained in oxidative hair dyes are N-acetylated in human or mammalian skin resulting in systemic exposure to traces of detoxified, i.e. non-genotoxic, metabolites, whereas human hepatocytes were unable to transform hair dye arylamines to potentially carcinogenic metabolites. An expert panel of the International Agency on Research of Cancer (IARC) concluded that there is no evidence for a causal association of hair dye exposure with an elevated cancer risk in consumers. Ultraviolet filters have important benefits by protecting the consumer against adverse effects of UV radiation; these substances undergo a stringent safety evaluation under current international regulations prior to their marketing. Concerns were also raised about the safety of solid nanoparticles in PCP, mainly TiO(2) and ZnO in sunscreens. However

Dermal safety assessment of Arm & Hammer laundry products formulated for sensitive skin.

Science.gov (United States)

Frederick, Douglas M; Vorwerk, Linda; Gupta, Archana; Ghassemi, Annahita

2017-09-01

The prevalence of sensitive skin among the general population in industrialized countries is reported to be over 50%. Sensitive skin subjects often report significant reactions to contact with cosmetics, soaps and other consumer products. This paper describes the overall skin compatibility and mildness program for a newly developed, lightly fragranced, colorant free laundry product (i.e. Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent), specially formulated for individuals with sensitive skin. The skin mildness of the product was compared to Arm & Hammer™ Free & Clear liquid laundry detergent with no fragrance or colorant, and an established history of safe use by sensitive skin consumers. The test material was a liquid laundry product with a light scent formulated for sensitive skin consumers (Arm & Hammer™ Sensitive Skin plus Skin-Friendly Fresh Scent). The product was compared to commercially marketed products for sensitive skin with a history of skin safety in the marketplace, including: a very similar product formulation (Arm & Hammer™ Free & Clear with no fragrance), and several selected competitors' products. Studies were conducted among individuals with self-assessed sensitive skin (based on a questionnaire) using standard protocols for the Human Repeat Insult Patch Test (HRIPT), 10-Day Cumulative Irritation, the Wrist Band Wear test, and the Safety In-Use testing. Responses in all protocols were evaluated by visual scoring of potential dermatologic reactions, and recording any sensory effects at the time of the examination. In addition, sensory effects collected from panelists' daily diaries were also evaluated. The HRIPT confirmed that neither the fragrance alone, nor the product formulation with fragrance, induced contact sensitization in sensitive skin subjects. The 10-Day cumulative irritation study conducted using sensitive skin subjects showed highly favorable skin compatibility, and the test product was comparable to the control

Safety aspects of the production of foods and food ingredients from insects.

Science.gov (United States)

Schlüter, Oliver; Rumpold, Birgit; Holzhauser, Thomas; Roth, Angelika; Vogel, Rudi F; Quasigroch, Walter; Vogel, Stephanie; Heinz, Volker; Jäger, Henry; Bandick, Nils; Kulling, Sabine; Knorr, Dietrich; Steinberg, Pablo; Engel, Karl-Heinz

2017-06-01

At present, insects are rarely used by the European food industry, but they are a subject of growing interest as an alternative source of raw materials. The risks associated with the use of insects in the production of foods and food ingredients have not been sufficiently investigated. There is a lack of scientifically based knowledge of insect processing to ensure food safety, especially when these processes are carried out on an industrial scale. This review focuses on the safety aspects that need to be considered regarding the fractionation of insects for the production of foods and food ingredients. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Safety evaluation for packaging (onsite) product removal can containers

International Nuclear Information System (INIS)

Burnside, M.E.

1998-01-01

Six Product Removal (PR) Cans and Containers are located within the Plutonium Finishing Plant. Each can is expected to contain a maximum of 3 g of residual radioactive material, consisting mainly of plutonium isotopes. The PR Can Containers were previously authorized by HNF-SD-TP-SEP-064, Rev. 0 (Boettger 1997), for the interarea transport of up to 3 g of plutonium. The purpose of this safety evaluation for packaging is to allow the transport of six PR Cans with their Containers from the Plutonium Finishing Plant to the 233 S Evaporator Facility. This safety evaluation for packaging is authorized for use until April 29, 1999, or until the shipment is made, whichever happens first

ITER Safety and Licensing

International Nuclear Information System (INIS)

Girard, J-.P; Taylor, N.; Garin, P.; Uzan-Elbez, J.; GULDEN, W.; Rodriguez-Rodrigo, L.

2006-01-01

The site for the construction of ITER has been chosen in June 2005. The facility will be implemented in Europe, south of France close to Marseille. The generic safety scheme is now under revision to adapt the design to the host country regulation. Even though ITER will be an international organization, it will have to comply with the French requirements in the fields of public and occupational health and safety, nuclear safety, radiation protection, licensing, nuclear substances and environmental protection. The organization of the central team together with its partners organized in domestic agencies for the in-kind procurement of components is a key issue for the success of the experimentation. ITER is the first facility that will achieve sustained nuclear fusion. It is both important for the experimental one-of-a-kind device, ITER itself, and for the future of fusion power plants to well understand the key safety issues of this potential new source of energy production. The main safety concern is confinement of the tritium, activated dust in the vacuum vessel and activated corrosion products in the coolant of the plasma-facing components. This is achieved in the design through multiple confinement barriers to implement the defence in depth approach. It will be demonstrated in documents submitted to the French regulator that these barriers maintain their function in all postulated incident and accident conditions. The licensing process started by examination of the safety options. This step has been performed by Europe during the candidature phase in 2002. In parallel to the final design, and taking into account the local regulations, the Preliminary Safety Report (RPrS) will be drafted with support of the European partner and others in the framework of ITER Task Agreements. Together with the license application, the RPrS will be forwarded to the regulatory bodies, which will launch public hearings and a safety review. Both processes must succeed in order to

A new approach to preparing safety cases for existing nuclear plant (COSR)

International Nuclear Information System (INIS)

Rice, S.A.; Buchan, A.B.

2000-01-01

BNFL is committed to achieving world class safety performance, through a process of continuously reviewing and improving its safety practices. In the mid 1990s, as part of this process, the company began to develop a new type of safety case, for existing non-reactor nuclear plants, called the continued operation safety report (COSR). Following a significant amount of development work from experts within BNFL and important contributions from its regulators, the first approved COSR was recently completed and submitted to the Nuclear Installations Inspectorate. The COSR aims to provide a visibly integrated safety and engineering case for the adequacy of continued operation of a nuclear facility. It achieves this by identifying the main plant structures, systems and components that have a safety function and provides the appropriate supporting engineering substantiation. The COSR aims to explore plant safety and identify worthwhile improvements. The document also aims to be reader-friendly by focusing on the main safety issues. It is therefore a slim safety summary which provides operators, safety specialists and regulators with an overview and introduction into the broader, more detailed safety case. This paper provides an overview of the COSR and its production process, describing the safety case improvements that have been made by comparing it to its predecessor, the fully developed safety case. The paper also illustrates the benefits of the COSR by providing current examples of its application on existing BNFL plant. Finally, the paper describes ongoing development work aimed at further improving the COSR and its production process. (author)

MARKETING PROGRAMS FOR GREEN PRODUCTS IN ACHIEVING ECOLOGICAL SUSTAINABILITY

OpenAIRE

Gabriela CĂPĂȚÎNĂ; Roxana-Denisa STOENESCU

2015-01-01

This article explores one dimension of green marketing programs: their potential application as a solution in achieving and maintaining the ecological sustainability on global market. We examine the necessity to develop and launch green products which can respond to environment degradation as a treatment against this phenomenon. This paper is structured in three sections: the first section is related to a clear delimitation and a better understanding of terms; the second one is an overvi...

Incorporation of occupational health and safety in cleaner production projects in South Africa

DEFF Research Database (Denmark)

Hedlund, Frank Huess

2002-01-01

The purpose of this research is to reveal ways in which occupational health and safety can be integrated in environmental cleaner production projects. Of particular interest are those cleaner production projects that are run by the Danish government's environmental assistance agency, Danced......, in South Africa.The study explores two main avenues of integration. First, integrating through better planning, focussing at the tools and procedures in use by Danced for project management -- integrating occupational health and safety into the project specification, so to speak.Second, integrating...... occupational health and safety into the environmental activities that take place at company level. Two ways of doing so are explored, the main distinction being company size. For large companies, integration of management systems may be attractive. For small companies, integration into a less formal network...

Optimal number of tests to achieve and validate product reliability

International Nuclear Information System (INIS)

Ahmed, Hussam; Chateauneuf, Alaa

2014-01-01

The reliability validation of engineering products and systems is mandatory for choosing the best cost-effective design among a series of alternatives. Decisions at early design stages have a large effect on the overall life cycle performance and cost of products. In this paper, an optimization-based formulation is proposed by coupling the costs of product design and validation testing, in order to ensure the product reliability with the minimum number of tests. This formulation addresses the question about the number of tests to be specified through reliability demonstration necessary to validate the product under appropriate confidence level. The proposed formulation takes into account the product cost, the failure cost and the testing cost. The optimization problem can be considered as a decision making system according to the hierarchy of structural reliability measures. The numerical examples show the interest of coupling design and testing parameters. - Highlights: • Coupled formulation for design and testing costs, with lifetime degradation. • Cost-effective testing optimization to achieve reliability target. • Solution procedure for nested aleatoric and epistemic variable spaces

A review on safety and efficacy of products containing Longifolia

Directory of Open Access Journals (Sweden)

Abdul Hafeez Ahmad Hamdi

2016-01-01

Full Text Available Eurycoma longifolia (commonly called tongkat ali is a flowering plant in the family Simaroubaceae, native to Indonesia, Malaysia, and, to a lesser extent, Thailand, Vietnam and also Laos. The roots extract of E. longifolia, is a well-known traditional herbal medicine in Asia used for many purposes such as sexual dysfunction, aging, malaria, cancer, diabetes, anxiety, aches, constipation, exercise recovery, fever, increased energy, increased strength, leukemia, osteoporosis, stress, syphilis and glandular swelling. The roots are also used as an aphrodisiac, antibiotic, appetite stimulant and health supplement. It is very important to conserve this valuable medicinal plant for the health benefit of future generations. The purpose of this review article is to evaluate and summarize the existing literatures regarding the efficacy and safety of products which contain E. longifolia as its main ingredient. In summary, based on the literature evaluated in this review article, products which contain tongkat ali showed a clinical benefit on improving erectile dysfunction as well as a good safety profile. We recommend consumers to check the level of the bioactive compound “eurycomanone” as their guide before choosing any E. longifolia product.

Clinical efficacy and safety of achieving very low LDL-cholesterol concentrations with the PCSK9 inhibitor evolocumab: a prespecified secondary analysis of the FOURIER trial.

Science.gov (United States)

Giugliano, Robert P; Pedersen, Terje R; Park, Jeong-Gun; De Ferrari, Gaetano M; Gaciong, Zbigniew A; Ceska, Richard; Toth, Kalman; Gouni-Berthold, Ioanna; Lopez-Miranda, Jose; Schiele, François; Mach, François; Ott, Brian R; Kanevsky, Estella; Pineda, Armando Lira; Somaratne, Ransi; Wasserman, Scott M; Keech, Anthony C; Sever, Peter S; Sabatine, Marc S

2017-10-28

LDL cholesterol is a well established risk factor for atherosclerotic cardiovascular disease. How much one should or safely can lower this risk factor remains debated. We aimed to explore the relationship between progressively lower LDL-cholesterol concentrations achieved at 4 weeks and clinical efficacy and safety in the FOURIER trial of evolocumab, a monoclonal antibody to proprotein convertase subtilisin-kexin type 9 (PCSK9). In this prespecified secondary analysis of 25 982 patients from the randomised FOURIER trial, the relationship between achieved LDL-cholesterol concentration at 4 weeks and subsequent cardiovascular outcomes (primary endpoint was the composite of cardiovascular death, myocardial infarction, stroke, coronary revascularisation, or unstable angina; key secondary endpoint was the composite of cardiovascular death, myocardial infarction, or stroke) and ten prespecified safety events of interest was examined over a median of 2·2 years of follow-up. We used multivariable modelling to adjust for baseline factors associated with achieved LDL cholesterol. This trial is registered with ClinicalTrials.gov, number NCT01764633. Between Feb 8, 2013, and June 5, 2015, 27 564 patients were randomly assigned a treatment in the FOURIER study. 1025 (4%) patients did not have an LDL cholesterol measured at 4 weeks and 557 (2%) had already had a primary endpoint event or one of the ten prespecified safety events before the week-4 visit. From the remaining 25 982 patients (94% of those randomly assigned) 13 013 were assigned evolocumab and 12 969 were assigned placebo. 2669 (10%) of 25 982 patients achieved LDL-cholesterol concentrations of less than 0·5 mmol/L, 8003 (31%) patients achieved concentrations between 0·5 and less than 1·3 mmol/L, 3444 (13%) patients achieved concentrations between 1·3 and less than 1·8 mmol/L, 7471 (29%) patients achieved concentrations between 1·8 to less than 2·6 mmol/L, and 4395 (17%) patients achieved

Microbiological quality and safety assessment of lettuce production in Brazil.

Science.gov (United States)

Ceuppens, Siele; Hessel, Claudia Titze; de Quadros Rodrigues, Rochele; Bartz, Sabrina; Tondo, Eduardo César; Uyttendaele, Mieke

2014-07-02

The microbiological quality and safety of lettuce during primary production in Brazil were determined by enumeration of hygiene indicators Escherichia coli, coliforms and enterococci and detection of enteric pathogens Salmonella and E. coli O157:H7 in organic fertilizers, soil, irrigation water, lettuce crops, harvest boxes and worker's hands taken from six different lettuce farms throughout the crop growth cycle. Generic E. coli was a suitable indicator for the presence of Salmonella and E. coli O157:H7, while coliforms and enterococci were not. Few pathogens were detected: 5 salmonellae and 2 E. coli O157:H7 from 260 samples, of which only one was lettuce and the others were manure, soil and water. Most (5/7) pathogens were isolated from the same farm and all were from organic production. Statistical analysis revealed the following environmental and agro-technical risk factors for increased microbial load and pathogen prevalence in lettuce production: high temperature, flooding of lettuce fields, application of contaminated organic fertilizer, irrigation with water of inferior quality and large distances between the field and toilets. Control of the composting process of organic fertilizers and the irrigation water quality appear most crucial to improve and/or maintain the microbiological quality and safety during the primary production of lettuce. Copyright © 2014 Elsevier B.V. All rights reserved.

Diagnostic and proposal for use of safety inventory into finished products for a plastics company

Directory of Open Access Journals (Sweden)

Elpidio Oscar Benitez Nara

2013-02-01

Full Text Available The stock is essential for companies. Thinking about it, it is increasingly necessary to develop techniques that seek to reduce inventory levels making them suitable to the company structure and satisfactorily meet the needs of increasingly demanding customers while maintaining the service level. The safety stock is derived from various uncertainties such as shortage of raw materials and difficulties in producing variations in sales projections thus scaling of this safety stock is a most difficult task to perform. In this sense, the present study aims to demonstrate the Inventory Management structure acceptable to a company that seeks to reduce capital invested in stocks as well as a for continuous review reorder point. The research was developed through an analysis of the current policy Inventories of the company, where we sought the most representative products of the product line. For these products it was necessary future sales forecasts for the annual period where it was possible to scale according to company politic Inventories of the average stocks of these products in order to compare with the stocks of securities calculated using specific equations. Then, using the equations it was also defined the point of application of all the studied products was defined, as a model for continuous revision product line studied. Finally the proposed method for use of safety stock techniques showed good results as a reduction of approximately 43% of capital invested in safety stock if compared to current Inventories policy of the company.

RFID in the blood supply chain--increasing productivity, quality and patient safety.

Science.gov (United States)

Briggs, Lynne; Davis, Rodeina; Gutierrez, Alfonso; Kopetsky, Matthew; Young, Kassandra; Veeramani, Raj

2009-01-01

As part of an overall design of a new, standardized RFID-enabled blood transfusion medicine supply chain, an assessment was conducted for two hospitals: the University of Iowa Hospital and Clinics (UIHC) and Mississippi Baptist Health System (MBHS). The main objectives of the study were to assess RFID technological and economic feasibility, along with possible impacts to productivity, quality and patient safety. A step-by-step process analysis focused on the factors contributing to process "pain points" (errors, inefficiency, product losses). A process re-engineering exercise produced blueprints of RFID-enabled processes to alleviate or eliminate those pain-points. In addition, an innovative model quantifying the potential reduction in adverse patient effects as a result of RFID implementation was created, allowing improvement initiatives to focus on process areas with the greatest potential impact to patient safety. The study concluded that it is feasible to implement RFID-enabled processes, with tangible improvements to productivity and safety expected. Based on a comprehensive cost/benefit model, it is estimated for a large hospital (UIHC) to recover investment from implementation within two to three years, while smaller hospitals may need longer to realize ROI. More importantly, the study estimated that RFID technology could reduce morbidity and mortality effects substantially among patients receiving transfusions.

Priming patient safety: A middle-range theory of safety goal priming via safety culture communication.

Science.gov (United States)

Groves, Patricia S; Bunch, Jacinda L

2018-05-18

The aim of this paper is discussion of a new middle-range theory of patient safety goal priming via safety culture communication. Bedside nurses are key to safe care, but there is little theory about how organizations can influence nursing behavior through safety culture to improve patient safety outcomes. We theorize patient safety goal priming via safety culture communication may support organizations in this endeavor. According to this theory, hospital safety culture communication activates a previously held patient safety goal and increases the perceived value of actions nurses can take to achieve that goal. Nurses subsequently prioritize and are motivated to perform tasks and risk assessment related to achieving patient safety. These efforts continue until nurses mitigate or ameliorate identified risks and hazards during the patient care encounter. Critically, this process requires nurses to have a previously held safety goal associated with a repertoire of appropriate actions. This theory suggests undergraduate educators should foster an outcomes focus emphasizing the connections between nursing interventions and safety outcomes, hospitals should strategically structure patient safety primes into communicative activities, and organizations should support professional development including new skills and the latest evidence supporting nursing practice for patient safety. © 2018 John Wiley & Sons Ltd.

Pesticide safety practice and its determinants among small scale ...

African Journals Online (AJOL)

Background: Strategies to achieve the millennium agricultural development goals include increased use of pesticides to increase agricultural production in poor countries. However, the increased availability and use of such chemicals need to be paralleled with national and personal level practices to maximize safety for ...

Radioactivity in consumer products : radiation safety and regulatory appraisal

International Nuclear Information System (INIS)

Murthy, B.K.S.; Venkataraman, G.; Subrahmanym, P.

1993-01-01

Use of radioactive materials in consumer products is in vogue almost since the discovery of radioactivity. There has been a rapid growth in the use of radioactive material in various consumer products such as Ionization Chamber Smoke Detectors (ICSD), Static eliminators, etc. In addition, there are certain manufacturing processes wherein the Naturally Occurring Radioactive Material (NORM) get incorporated in the consumer products. Certain phosphatic fertilizers, titanium dioxide pigments, phospho gypsum plaster boards are some examples in this category. The manufacture and use of these products result in radiation dose to the public apart from radiation exposure to the personnel involved in the manufacturing process. Appropriate radiation control measures have to be taken in the design, manufacture and use of consumer products to ensure that the radiation doses to the public and the population at large do not exceed the relevant limits. While appropriate regulatory controls and surveillance are established for manufacture and use of certain products, these are still to be recognised and established in respect of certain other processes and products. The current status of radiation safety and regulatory control and the lack of these in respect of some products are discussed in this paper. (author). 5 refs

Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned

Safety design requirements for safety systems and components of JSFR

International Nuclear Information System (INIS)

Kubo, Shigenobu; Shimakawa, Yoshio; Yamano, Hidemasa; Kotake, Shoji

2011-01-01

Safety design requirements for JSFR were summarized taking the development targets of the FaCT project and design feature of JSFR into account. The related safety principle and requirements for Monju, CRBRP, PRISM, SPX, LWRs, IAEA standards, goals of GIF, basic principle of INPRO etc. were also taken into account so that the safety design requirements can be a next-generation global standard. The development targets for safety and reliability are set based on those of FaCT, namely, ensuring safety and reliability equal to future LWR and related fuel cycle facilities. In order to achieve these targets, the defence-in-depth concept is used as the basic safety design principle. General features of the safety design requirements are 1) Achievement of higher reliability, 2) Achievement of higher inspectability and maintainability, 3) Introduction of passive safety features, 4) Reduction of operator action needs, 5) Design consideration against Beyond Design Basis Events, 6) In-Vessel Retention of degraded core materials, 7) Prevention and mitigation against sodium chemical reactions, and 8) Design against external events. The current specific requirements for each system and component are summarized taking the basic design concept of JSFR into account, which is an advanced loop-type large-output power plant with a mixed-oxide-fuelled core. (author)

Fission product source terms and engineered safety features

International Nuclear Information System (INIS)

Malinauskas, A.P.

1984-01-01

The author states that new, technically defensible, methodologies to establish realistic source term values for nuclear reactor accidents will soon be available. Although these methodologies will undoubtedly find widespread use in the development of accident response procedures, the author states that it is less clear that the industry is preparing to employ the newer results to develop a more rational approach to strategies for the mitigation of fission product releases. Questions concerning the performance of existing engineered safety systems are reviewed

Analysis of safety supervision effect on coal mine using game theory

Energy Technology Data Exchange (ETDEWEB)

Zhou Min; Xiao Zhong-hai [China University of Mining & Technology, Xuzhou (China). School of Management

2006-07-01

A two-phase game model was constructed based on economic game theory to improve the inefficient supervision conditions of coalmining enterprises' safety production. The inner mechanism of safety supervision system was carefully studied. The strategy set of the dynamic game-theory relations between colliery proprietor and safety supervision department and the strict competitive game-theory relations between safety supervision department and workers at the production line was analyzed. The conditions of achieving the dominant-strategy equilibrium were revealed. Upon this basis, the possible solution set of safety benefit distribution for the cooperative game-theory of triple party was obtained and the effective and cooperative fair solution was formed. Finally, conclusions are drawn as follows: the combination of necessary penalty to supervisors and operators with the fair distribution of safety benefits can realize the zero-defect of operational violation, so that the violation behavior can be completely avoided. 10 refs., 7 figs.

Modelling of Safety Factors in the Design of GRP Composite Products

DEFF Research Database (Denmark)

Babu, B.J.C.; Prabhakaran, R.T. Durai; Lystrup, Aage

2010-01-01

as independent, while in real applications these factors may interact/influence each other. Following the concept developed by the authors, a simple graph theoretic model has been used to determine overall factor of safety. This is described with the help of an example and it has been demonstrated......An attempt has been made in this paper to arrive at the safety factor design of glass fibre reinforced polymer (GRP) composite products using graph theoretic model. In the conventional design and recommendations of the standards, these design factors affecting properties have been considered...

Nuclear safety culture and nuclear safety supervision

International Nuclear Information System (INIS)

Chai Jianshe

2013-01-01

In this paper, the author reviews systematically and summarizes up the development process and stage characteristics of nuclear safety culture, analysis the connotation and characteristics of nuclear safety culture, sums up the achievements of our country's nuclear safety supervision, dissects the challenges and problems of nuclear safety supervision. This thesis focused on the relationship between nuclear safety culture and nuclear safety supervision, they are essential differences, but there is a close relationship. Nuclear safety supervision needs to introduce some concepts of nuclear safety culture, lays emphasis on humanistic care and improves its level and efficiency. Nuclear safety supervision authorities must strengthen nuclear safety culture training, conduct the development of nuclear safety culture, make sure that nuclear safety culture can play significant roles. (author)

Atomic risk insurance. Risk policy, safety production and expertise in Germany and the USA 1945 - 1986

International Nuclear Information System (INIS)

Wehner, Christoph

2017-01-01

The book covers the following chapters: (I) Between threat and promise: Political change and the corporate perception, the burden of the atomic bomb, promise of nuclear energy risk criticism in the pre-ecological phase, nuclear risk as investment restraint; (II) Risk policy at the insurability limit: hazard knowledge, safety production and insurance expertise in the German nuclear policy (1955-1962); (III) Risk policy beyond the catastrophe, insurability interpretation, concepts and conflicts (1957-1968); (IV) Scandalization of risk policy: safety production, confidence and expertise in the nuclear controversial debate (1969 - 1979); (V) Nuclear risk policy and the challenge of the ''risk society'' (1975-1986); (VI) From safety production to hazard probe: atomic energy And the change of insurance.

Study on coal mine macro, meso and micro safety management system

Directory of Open Access Journals (Sweden)

Longkang Wang

2016-03-01

Full Text Available In recent years, the coal mine safety production situation in our country improved year by year, but severe accidents still occurred; the accidents caused great economic loss to the national economy. According to statistical analysis, almost all of the coal mine accidents will expose the hidden danger in before, most of the accidents caused due to safety management not reaching the designated position and the hidden danger management does not take any decision in time. Based on the coal mine safety management holes in our country, the coal mine macro, meso and micro safety management system was established in this paper, which includes meaning and conception of the theories of the macro, meso and micro safety management, and also includes the matching hardware equipment, in order to achieve the hidden danger's closed-loop control and dynamic early warning in the process of coal mine production.

Tracking the Market Performance of Companies That Integrate a Culture of Health and Safety: An Assessment of Corporate Health Achievement Award Applicants.

Science.gov (United States)

Fabius, Raymond; Loeppke, Ronald R; Hohn, Todd; Fabius, Dan; Eisenberg, Barry; Konicki, Doris L; Larson, Paul

2016-01-01

The aim of this study was to assess the hypothesis that stock market performance of companies achieving high scores on either health or safety in the Corporate Health Achievement Award (CHAA) process will be superior to average index performance. The stock market performance of portfolios of CHAA winners was examined under six different scenarios using simulation and past market performance in tests of association framed to inform the investor community. CHAA portfolios out-performed the S&P average on all tests. This study adds to the growing evidence that a healthy and safe workforce correlates with a company's performance and its ability to provide positive returns to shareholders. It advances the idea that a proven set of health and safety metrics based on the CHAA evaluation process merits inclusion with existing measures for market valuation.

75 FR 47602 - Clinical Studies of Safety and Effectiveness of Orphan Products Research Project Grant (R01)

Science.gov (United States)

2010-08-06

...] Clinical Studies of Safety and Effectiveness of Orphan Products Research Project Grant (R01) AGENCY: Food... (OPD) grant program. The goal of FDA's OPD grant program is to support the clinical development of... product will be superior to the existing therapy. FDA provides grants for clinical studies on safety and...

Assessment of Primary Production of Horticultural Safety Management Systems of Mushroom Farms in South Africa.

Science.gov (United States)

Dzingirayi, Garikayi; Korsten, Lise

2016-07-01

Growing global consumer concern over food safety in the fresh produce industry requires producers to implement necessary quality assurance systems. Varying effectiveness has been noted in how countries and food companies interpret and implement food safety standards. A diagnostic instrument (DI) for global fresh produce industries was developed to measure the compliancy of companies with implemented food safety standards. The DI is made up of indicators and descriptive grids for context factors and control and assurance activities to measure food safety output. The instrument can be used in primary production to assess food safety performance. This study applied the DI to measure food safety standard compliancy of mushroom farming in South Africa. Ten farms representing almost half of the industry farms and more than 80% of production were independently assessed for their horticultural safety management system (HSMS) compliance via in-depth interviews with each farm's quality assurance personnel. The data were processed using Microsoft Office Excel 2010 and are represented in frequency tables. The diagnosis revealed that the mushroom farming industry had an average food safety output. The farms were implementing an average-toadvanced HSMS and operating in a medium-risk context. Insufficient performance areas in HSMSs included inadequate hazard analysis and analysis of control points, low specificity of pesticide assessment, and inadequate control of suppliers and incoming materials. Recommendations to the industry and current shortcomings are suggested for realization of an improved industry-wide food safety assurance system.

International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

Science.gov (United States)

Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

2013-12-01

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

Development of the reactor safety film

International Nuclear Information System (INIS)

Sheheen, N.N.; Hodson, P.J.

1981-01-01

The first computer-generated film of LASL's Reactor Safety efforts was developed using the ANIMATE framework, a program that adds visual capabilities to MAPPER. Numerous software limitations had to be overcome within a very limited production schedule. A significant achievement was the 15,000-vector-per-frame sequence depicting a pressurized water reactor core with parts flashing while pumps circulate fluid through the system

Safety assessment of starch-based personal care products: Nanocapsules and pickering emulsions.

Science.gov (United States)

Marto, J; Pinto, P; Fitas, M; Gonçalves, L M; Almeida, A J; Ribeiro, H M

2018-03-01

The safety profile of the ingredients used in topical dosage forms and its evaluation is an issue of utmost importance. A suitable equilibrium between safety and efficacy is crucial before promoting a dermatological product. The aim of this work was to assess the safety and biological effects of starch-based vehicles (St-BV) used in such products. The hazard, exposure and dose-response assessment were used to characterize the risk of each ingredient. The EpiSkin™ assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the St-BV was studied using biophysical measurements in human volunteers during 28 days, showing that all ingredients and their combinations were safe for the consumer. Tissue viability determined using the EpiSkin™ testing reached values between 84.0 ± 5.0% and 98.0 ± 8.6% after application of St-BV, which were considered as non-irritant to the skin. These observations were confirmed by the in vivo studies where the St-BV did not induce any sensitization on the volunteers, being safe for human use. Moreover, St-BV increased skin hydration and microcirculation, emerging as an attractive alternative to chemical raw materials. Copyright © 2018 Elsevier Inc. All rights reserved.

Agency perspectives on food safety for the products of animal biotechnology.

Science.gov (United States)

Howard, H J; Jones, K M; Rudenko, L

2012-08-01

Animal biotechnology represents one subset of tools among a larger set of technologies for potential use to meet increasing world demands for food. Assisted reproductive technologies (ART) such as artificial insemination and embryo transfer continue to make positive contributions in food animal production. The US Food and Drug Administration (FDA) performed a comprehensive risk assessment to identify potential food consumption or animal health risks associated with animal cloning, an emerging ART. At that time, FDA concluded that animal cloning posed no unique risks either to animal health or to food consumption, and food from animal clones and their sexually reproduced offspring required no additional federal regulation beyond that applicable to conventionally bred animals of the species examined. At this time, no new information has arisen that would necessitate a change in FDA's conclusions on food from animal clones or their sexually reproduced offspring. Use of recombinant DNA technologies to produce genetically engineered (GE) animals represents another emerging technology with potential to impact food animal production. In its regulation of GE animals, FDA follows a cumulative, risk-based approach to address scientific questions related to the GE animals. FDA evaluates data and information on the safety, effectiveness and stability of the GE event. FDA carries out its review at several levels (e.g. molecular biology, animal safety, food safety, environmental safety and claim validation). GE animal sponsors provide data to address risk questions for each level. This manuscript discusses FDA's role in evaluation of animal cloning and GE animals. © 2012 Blackwell Verlag GmbH.

The Quality and Food Safety of Dry Smoke Garfish (Hemirhamphus far) Product From Maluku

Science.gov (United States)

Marthina Tapotubun, Alfonsina; Reiuwpassa, Fredrik; Apituley, Yolanda M. T. N.; Nanlohy, Hellen; Matrutty, Theodora E. A. A.

2017-10-01

Dry garfish is product of smoked process of “ikan julung” (Hemirhamphus far) and slowly the product getting dry, stiff and its colour become gold yellow-brown. The aim of this study is to find out quality and food safety of dry smoked “julung” from Maluku. The sample of this study is taken from production Keffing village, East Seram Regency, Maluku. Parameters to be analyzed are degrees of protein, fat, water, ash, TPC, Escherichia coli, Salmonella, Vibrio and total Staphylococcus aureus used standard analysis method for proximate (AOAC. 2005), sensosy parameters (BSN.2009) and food safety (BSN. 2006). Spreadsheet Ms Excel (Microsoft Inc., USA) is used for data processing; data is being analyzed descriptively to be interpreted in the research report. Dry smoked “julung” Keffing village, Maluku meet the good quality and food safety, that are ingredient degrees of water content 12.43%, protein 61.55%, fat 12.58%, ash 9.3%, TPC [6,8] × 101 CFU, total Staphylococcus sp [1,7] × 102, total E.coli 6.4 APM/g. and negatively for Salmonella and Vibrio.

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

Science.gov (United States)

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Importance of Decision Support Systems About Food Safety in Raw Milk Production

Directory of Open Access Journals (Sweden)

Ecem Akan

2015-12-01

Full Text Available In raw milk production decision support systems for control of food safety hazards has not been developed but main points of this system are available. The decision support systems’ elements include data identification at critical points in the milk supply chain, an information management system and data exchange. Decision supports systems has been developed on the basis of these elements. In dairy sector decision support systems are significant for controlling of food safety hazards and preferred by producers. When these systems are implemented in the milk supply chain, it can be prevented unnecessary sampling and analysis. In this article it will be underlined effects of decision support system elements on food safety of raw milk.

Effects of climate change on food safety hazards in the dairy production chain

NARCIS (Netherlands)

Spiegel, van der M.; Fels-Klerx, van der H.J.; Marvin, H.J.P.

2012-01-01

The aim of this study is to analyse the effect of climate change on emerging food safety hazards in the dairy production chain. For this purpose, a holistic approach was used to select critical factors from inside and outside the production chain that are affected by climatic factors. An expert

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

International Nuclear Information System (INIS)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R.

2011-01-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

Leading safety performance indicators for resilience assessment of radiopharmaceuticals production process

Energy Technology Data Exchange (ETDEWEB)

Grecco, Claudio H.S.; Santos, Isaac J.A.L.; Carvalho, Paulo V.R., E-mail: grecco@ien.gov.b, E-mail: luquetti@ien.gov.b, E-mail: paulov@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Instrumentacao e Confiabilidade Humana; Vidal, Mario C.R., E-mail: mvidal@ergonomia.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (PEP/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia de Producao. Grupo de Ergonomia e Novas Tecnologias (GENTE)

2011-07-01

Radiopharmaceuticals are radiation-emitting substances used in medicine for radiotherapy and imaging diagnosis. A Research Institute, located in Rio de Janeiro, produces three radiopharmaceuticals: the sodium iodate is used in the diagnosis of thyroid dysfunctions, the meta-iodo-benzyl guanidine is used in the diagnosis of cardiac diseases, and the fluorodeoxyglucose is used in diagnosis in cardiology, oncology, neurology and neuro psychiatry. This paper presents a leading safety performance indicators framework to assess the resilience of radiopharmaceuticals production processes. The organizations that use resilience indicators will be able to pro actively evaluate and manage safety. (author)

Food Safety in the Context of the European Union

Directory of Open Access Journals (Sweden)

Vasile

2018-02-01

Full Text Available Food safety is a component of food security. According to Codex Alimentarius, food safety is “assurance that food will not cause harm to the consumer when it is prepared and/or eaten according to its intended use”. Food products ‒ processed or fresh ‒ sold to final consumers must not affect their health as a result of direct consumption or processing, depending on the intended purpose of each. In order for a food product ‒ unprocessed, partially or totally processed or newly created ‒ to be safe, it must necessarily fulfil three conditions: to have innocuousness, to be salubrious, not to endanger the human body, that is the normal and healthy consumer; to have nutritional and energy value; food nutrients to be available for the body. Both the European and the national general regulatory frameworks on food safety set the consumer’s right to a safe diet. The normative acts adopted by the European Union (EU are aimed at harmonizing national food safety standards so that the free movement of food products can be achieved as efficiently as possible. In this respect, the European Union has developed a rich legislative body on food safety, animal health and welfare, and plant health, which is binding in all EU countries.

Standardized safety management of AP1000 nuclear power plant

International Nuclear Information System (INIS)

Li Xingwen; Cao Zhiqiang; Cong Jiuyuan

2011-01-01

In 2002, China published and implemented the Law of the People's Republic of China on Work Safety and promulgated a series of guidelines and policies, which strengthened the safety management supervision. Standardization of safety, as another important step on safety supervision, comes after safety assesment and safety production licensing system, is also a permanent solution. Standardization of safety is a strategic, long term and fundamental work, which is also the basic access to achieving scientific safety management and increasing the inherent safety of an enterprise. Haiyang AP1000 nuclear power plant, adopting the modularized, 'open-top' and parallel construction means, overturned the traditional construction theory of installation work comes after the civil work and greatly shorten the construction period. At the same time, the notable increase of oversize module transportation and lifting and parallel construction raises higher demands for safety management. This article combines the characteristics and difficulties of safety management for Haiyang AP1000 nuclear power plant, puts forward ideas and methods for standardized safety management, and could also serve as reference to the safety management for other AP1000 projects. (authors)

Safety goals and safety culture opening plenary. 2. Safety Regulation Implemented by Gosatomnadzor of Russia

International Nuclear Information System (INIS)

Gutsalov, A.T.; Bukrinsky, A.M.

2001-01-01

more strict than those recommended in the INSAG-3 and INSAG-12 reports, but they correlate with the value of negligible individual risk of 10 -6 , established in 'Radiation Safety Standards' (NRB-99) and consider still a high level of uncertainty in calculation of these probabilities. OPB- 88/97 also defines safety culture and principles of its formation and provision. Gosatomnadzor of Russia is a federal executive authority implementing state safety regulation in nuclear energy use. One of the main activities of Gosatomnadzor of Russia is nuclear and radiation safety regulation in sitting, design, construction, operation, and decommissioning of nuclear facilities. The activities include the following: 1. development and enactment of regulatory documents; 2. licensing of activities at nuclear facilities; 3. state supervision on observing the requirements of federal rules and regulations and license conditions. Gosatomnadzor of Russia strives toward solving the problems of consistent safety improvement of facilities and technologies up to the internationally accepted level, acting within the framework of the existing set of special safety rules and regulations in production and use of nuclear energy. Simultaneously, Gosatomnadzor of Russia develops proposals aimed at the improvement of legislative and regulatory bases of the Russian Federation as well as licensing and inspection procedures and implementing them. The main principles that Gosatomnadzor of Russia follows in its practical activities are openness, publicity, and cooperation with juridical and natural persons, whose activities are regulated with the purpose of achieving safety. This cooperation is accomplished in compliance with the principle of separation of responsibilities. According to this principle, the parties that are involved in activities related to the use of nuclear materials and nuclear energy on one hand, and in the state regulation of nuclear and radiation safety on the other hand, bear

Inherent/passive safety for fusion

International Nuclear Information System (INIS)

Piet, S.J.

1986-06-01

The concept of inherent or passive passive safety for fusion energy is explored, defined, and partially quantified. Four levels of safety assurance are defined, which range from true inherent safety to passive safety to protection via active engineered safeguard systems. Fusion has the clear potential for achieving inherent or passive safety, which should be an objective of fusion research and design. Proper material choice might lead to both inherent safety and high mass power density, improving both safety and economics. When inherent safety is accomplished, fusion will be well on the way to achieving its ultimate potential and to be truly different and superior

Food Safety Regulation and Firm Productivity: Evidence from the French Food Industry

OpenAIRE

Requillart, Vincent; Nauges, Celine; Simioni, Michel; Bontemps, Christophe

2012-01-01

The purpose of this article is to assess whether food safety regulations imposed by the European Union in the 2000s may have induced a slow-down in the productivity of firms in the food processing sector. The impact of regulations on costs and productivity has seldom been studied. This article contributes to the literature by measuring productivity change using a panel of French food processing firms for the years 1996 to 2006. To do so, we develop an original iterative testing procedure b...

Recent achievement within the French-German safety approach for future PWRs

International Nuclear Information System (INIS)

Gros, G.; Rollinger, F.; Frisch, W.; Simon, M.

1999-12-01

The development of the common French-German safety approach was accomplished on three working levels: the technical safety organisations GRS and IPSN provided the technical basis, the advisory groups GPR and RSK developed common recommendations, and the authorities BMU and DSIN adopted and issued the recommendations. The general safety approach issued in May 1993 contains safety objectives, general principles and some technical principles for future PWRs. Based on this general approach, more detailed recommendations have been developed in 1994 on key issues. The following period from 1995 on was characterised by a further refinement of the recommendations and the treatment of some new subjects such as digital I and C, man-machine-interface and core design. (authors)

The global safety regime - Setting the stage

International Nuclear Information System (INIS)

Meserve, R.A.

2005-01-01

The existing global safety regime has arisen from the exercise of sovereign authority, with an overlay of voluntary international cooperation from a network of international and regional organizations and intergovernmental agreements. This system has, in the main, served us well. For several reasons, the time is ripe to consider the desired shape of a future global safety regime and to take steps to achieve it. First, every nation's reliance on nuclear power is hostage to some extent to safety performance elsewhere in the world because of the effects on public attitudes and hence there is an interest in ensuring achievement of common standards. Second, the world is increasingly interdependent and the vendors of nuclear power plants seek to market their products throughout the globe. Efficiency would arise from the avoidance of needless differences in approach that require custom modifications from country to country. Finally, we have much to learn from each other and a common effort would strengthen us all. Such an effort might also serve to enhance public confidence. Some possible characteristics of such a regime can be identified. The regime should reflect a global consensus on the level of safety that should be achieved. There should be sufficient standardization of approach so that expertise and equipment can be used everywhere without significant modification. There should be efforts to ensure a fundamental commitment to safety and the encouragement of a safety culture. And there should be efforts to adopt more widely the best regulatory practices, recognizing that some modifications in approach may be necessary to reflect each nation's legal and social culture. At the same type, the regime should have the characteristics of flexibility, transparency, stability, practicality, and encouragement of competence. (author)

Chemical safety of cassava products in regions adopting cassava production and processing - experience from Southern Africa

DEFF Research Database (Denmark)

Nyirenda, D.B.; Chiwona-Karltun, L.; Chitundu, M.

2011-01-01

and perceptions concerning cassava and chemical food safety. Chips, mixed biscuits and flour, procured from households and markets in three regions of Zambia (Luapula-North, Western and Southern) as well as products from the Northern, Central and Southern regions of Malawi, were analyzed for total cyanogenic...... of products commercially available on the market. Risk assessments disclose that effects harmful to the developing central nervous system (CNS) may be observed at a lower exposure than previously anticipated. We interviewed farmers in Zambia and Malawi about their cultivars, processing procedures......The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels...

Trustworthy Variant Derivation with Translation Validation for Safety Critical Product Lines

DEFF Research Database (Denmark)

Iosif-Lazăr, Alexandru Florin; Wasowski, Andrzej

2016-01-01

Software product line (SPL) engineering facilitates development of entire families of software products with systematic reuse. Model driven SPLs use models in the design and development process. In the safety critical domain, validation of models and testing of code increases the quality...... of the products altogether. However, to maintain this trustworthiness it is necessary to know that the SPL tools, which manipulate models and code to derive concrete product variants, do not introduce errors in the process. We propose a general technique of checking correctness of product derivation tools through...... translation validation. We demonstrate it using Featherweight VML—a core language for separate variability modeling relying on a single kind of variation point to define transformations of artifacts seen as object models. We use Featherweight VML with its semantics as a correctness specification...

Is there an antagonism between nuclear safety and productivity?

International Nuclear Information System (INIS)

Dessus de Cerou, E.; Fourest, B.; Frantzen, C.; Lacoste, A.C.

1999-01-01

This article reviews the conference organized by the SFEN on November 10, 1998. The object of this meeting was to overview the recent dispositions taken by EdF about the management of its nuclear power plants. The creation of OSD (safety-availability-observatories) in each nuclear plant, whose purpose is to set a dialogue between the demands of safety and the optimization of production shows the importance given by EdF to provide a safe and competitive energy. It shows also the will of EdF to acknowledge the existence of real conflicts between radiation protection, quality assurance and competitiveness in the daily life of a nuclear facility. EdF will face a partial opening of its market by february 2000 within the limits defined by European regulations. This increase of competition could rise problems between the transparency of nuclear activities, patent rights and information reporting. (A.C.)

The Food Safety of Livestock Products (Meatball, Corned Beef, Beef Burger and Sausage Studied from Heavy Metal Residues Contamination

Directory of Open Access Journals (Sweden)

E Harlia

2010-01-01

Full Text Available The aims of animal husbandry improvements are to increase both the quality and the quantity of livestock production and to ensure the safety of the product. It is necessarry for consumers to pay attention to the food safety of livestock product because it is related to human's health. The research was conducted to determine the food safety of livestock product condition by detecting heavy metal residues on several food products from livestock like meatball, corned beef, burger’s beef, and sausages. This research was explored by using survey's method and purposive technique sampling, then the resulted data were descriptively analyzed. The observed variables were heavy metal contents such as Plumbum (Pb and Cadmium (Cd in which being measured by using AAS (Atomic Absorption Spectrophotometri . The result showed that in general, heavy metal residue of Pb from several livestock products (meatball, corned beef, beef burger, and sausages were smaller than Maximum Residue Limit (MRL, while the Cd’s residue was partly over the MRL concentration, therefore further action has to be taken as it affects the human's health. (Animal Production 12(1: 50-54 (2010 Key words : food safety, MRL, heavy metal Pb, Cd.

MARKETING PROGRAMS FOR GREEN PRODUCTS IN ACHIEVING ECOLOGICAL SUSTAINABILITY

Directory of Open Access Journals (Sweden)

Gabriela CĂPĂȚÎNĂ

2015-04-01

Full Text Available This article explores one dimension of green marketing programs: their potential application as a solution in achieving and maintaining the ecological sustainability on global market. We examine the necessity to develop and launch green products which can respond to environment degradation as a treatment against this phenomenon. This paper is structured in three sections: the first section is related to a clear delimitation and a better understanding of terms; the second one is an overview of the literature about ecological sustainability; the third section is the most relevant part of this paper because is trying to shape a framework of marketing programs for the development of green products, considering the decisions related to marketing mix elements. Even if green marketing programs make sense, current understanding of how managers can start to develop or transform their marketing efforts is far from comprehensive; therefore, this study is addressed to this knowledge gap.

Total safety management: An approach to improving safety culture

International Nuclear Information System (INIS)

Blush, S.M.

1993-01-01

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobyl nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair

Safety barriers to prevent release of hydrocarbons during production of oil and gas

OpenAIRE

Sklet, Snorre; Hauge, Stein

2004-01-01

This report documents a set of scenarios related to release of hydrocarbons during production on oil and gas platforms. For each release scenario, initiating events, barrier functions aimed to prevent loss of containment, and barrier systems that realize these barrier functions are identified and described. Safety barriers to prevent release of hydrocarbons during production of oil and gas

Evaluation of hygiene and safety criteria in the production of a traditional Piedmont cheese

Directory of Open Access Journals (Sweden)

Sara Astegiano

2014-08-01

Full Text Available Traditional products and related processes must be safe to protect consumers’ health. The aim of this study was to evaluate microbiological criteria of a traditional Piedmont cheese, made by two different cheese producers (A and B. Three batches of each cheese were considered. The following seven samples of each batch were collected: raw milk, milk at 38°C, curd, cheese at 7, 30, 60, 90 days of ripening. During cheese making process, training activities dealing with food safety were conducted. Analyses regarding food safety and process hygiene criteria were set up according to the EC Regulation 2073/2005. Other microbiological and chemical-physical analyses [lactic streptococci, lactobacilli, pH and water activity (Aw] were performed as well. Shiga-toxin Escherichia coli, aflatoxin M1 and antimicrobial substances were considered only for raw milk. All samples resulted negative for food safety criteria; Enterobacteriaceae, E.coli and coagulase-positive staphylococci (CPS were high in the first phase of cheese production, however they decreased at the end of ripening. A high level of CPS in milk was found in producer A, likewise in some cheese samples a count of >5 Log CFU/g was reached; staphylococcal enterotoxins resulted negative. The pH and Aw values decreased during the cheese ripening period. The competition between lactic flora and potential pathogen microorganisms and decreasing of pH and Aw are considered positive factors in order to ensure safety of dairy products. Moreover, training activities play a crucial role to manage critical points and perform corrective action. Responsible application of good manufacturing practices are considered key factors to obtain a high hygienic level in dairy products.

Evaluation of Hygiene and Safety Criteria in the Production of a Traditional Piedmont Cheese.

Science.gov (United States)

Astegiano, Sara; Bellio, Alberto; Adriano, Daniela; Bianchi, Daniela Manila; Gallina, Silvia; Gorlier, Alessandra; Gramaglia, Monica; Lombardi, Giampiero; Macori, Guerrino; Zuccon, Fabio; Decastelli, Lucia

2014-08-28

Traditional products and related processes must be safe to protect consumers' health. The aim of this study was to evaluate microbiological criteria of a traditional Piedmont cheese, made by two different cheese producers (A and B). Three batches of each cheese were considered. The following seven samples of each batch were collected: raw milk, milk at 38°C, curd, cheese at 7, 30, 60, 90 days of ripening. During cheese making process, training activities dealing with food safety were conducted. Analyses regarding food safety and process hygiene criteria were set up according to the EC Regulation 2073/2005. Other microbiological and chemical-physical analyses [lactic streptococci, lactobacilli, pH and water activity (A w )] were performed as well. Shiga-toxin Escherichia coli , aflatoxin M1 and antimicrobial substances were considered only for raw milk. All samples resulted negative for food safety criteria; Enterobacteriaceae , E.coli and coagulase-positive staphylococci (CPS) were high in the first phase of cheese production, however they decreased at the end of ripening. A high level of CPS in milk was found in producer A, likewise in some cheese samples a count of >5 Log CFU/g was reached; staphylococcal enterotoxins resulted negative. The pH and A w values decreased during the cheese ripening period. The competition between lactic flora and potential pathogen microorganisms and decreasing of pH and A w are considered positive factors in order to ensure safety of dairy products. Moreover, training activities play a crucial role to manage critical points and perform corrective action. Responsible application of good manufacturing practices are considered key factors to obtain a high hygienic level in dairy products.

How is success achieved by individuals innovating for patient safety and quality in the NHS?

Science.gov (United States)

Sheard, Laura; Jackson, Cath; Lawton, Rebecca

2017-09-11

Innovation in healthcare is said to be notoriously difficult to achieve and sustain yet simultaneously the health service is under intense pressure to innovate given the ever increasing demands placed upon it. Whilst many studies have looked at diffusion of innovation from an organisational perspective, few have sought to understand how individuals working in healthcare innovate successfully. We took a positive deviance approach to understand how innovations are achieved by individuals working in the NHS. We conducted in depth interviews in 2015 with 15 individuals who had received a national award for being a successful UK innovator in healthcare. We invited only those people who were currently (or had recently) worked in the NHS and whose innovation focused on improving patient safety or quality. Thematic analysis was used. Four themes emerged from the data: personal determination, the ability to broker relationships and make connections, the ways in which innovators were able to navigate organisational culture to their advantage and their ability to use evidence to influence others. Determination, focus and persistence were important personal characteristics of innovators as were skills in being able to challenge the status quo. Innovators were able to connect sometimes disparate teams and people, being the broker between them in negotiating collaborative working. The culture of the organisation these participants resided in was important with some being able to use this (and the current patient safety agenda) to their advantage. Gathering robust data to demonstrate their innovation had a positive impact and was seen as essential to its progression. This paper reveals a number of factors which are important to the success of innovators in healthcare. We have uncovered that innovators have particular personal traits which encourage a propensity towards change and action. Yet, for fruitful innovation to take place, it is important for relational networks and

Analysis of accidents in uranium mines and suggestions on safety in production

International Nuclear Information System (INIS)

Xue Shiqian.

1989-01-01

The serious and fatal accidents happening in the uranium mines in China are descibed and analysed based on the classification, cause, age of the dead and economic losses brought by the accidents. The suggestions on safety in production are also presented

Safety study of the coupling of a VHTR with a hydrogen production plant

International Nuclear Information System (INIS)

Bertrand, F.; Germain, T.; Bentivoglio, F.; Bonnet, F.; Moyart, Q.; Aujollet, P.

2011-01-01

Highlights: → The paper deals with safety issues of the coupling of a VHTR with a H 2 production plant. → Internal incidents/accidents in the coupling system have been studied with the CATHARE2 code. → Transient studies have indicated a substantial grace delay when the VHTR faces the H 2 plant disturbances. → Hydrogen release and combustion leads to safety distances of about 100 m. → No showstopper has been put in evidence regarding the feasibility of the VHTR/H 2 plant coupling. - Abstract: The present paper deals with specific safety issues resulting from the coupling of a nuclear reactor (very high temperature reactor, VHTR) with a hydrogen production plant (HYPP). The first part is devoted to the safety approach consisting in taking into account the safety standards and rules dedicated to the nuclear facility as well as those dedicated to the process industry. This approach enabled two main families of events to be distinguished: the so-called internal events taking place in the coupling circuit (transients, breaks in pipes and in heat exchangers) and the external events able to threat the integrity of the various equipments (in particular the VHTR containment and emergency cooling system) that could result from accidents in the HYPP. By considering a hydrogen production by means of the iodine/sulfur (IS) process, the consequences of the both families of events aforementioned have been assessed in order to provide an order of magnitude of the effects of the incidents and accidents and also in order to propose safety provisions to mitigate these effects when it is necessary. The study of transients induced by a failure of a part of the HYPP has shown the possibility to keep the part of the HYPP unaffected by the transient under operation by means of an adapted regulation set. Moreover, the time to react in case of transfer of corrosive products in the VHTR containment has been assessed as well as the thermohydraulic loading that would experience the

African American Social Work Faculty: Overcoming Existing Barriers and Achieving Research Productivity

Science.gov (United States)

Allen, Junior Lloyd; Huggins-Hoyt, Kimberly Y.; Holosko, Michael J.; Briggs, Harold E.

2018-01-01

Purpose: This study explored the scholarship experiences of top-ranked African American faculty in schools of social work. Method: Qualitative interviews were conducted with N = 10 top-ranked African American faculty identified as achieving considerable productivity and impact of scholarship. Findings: Four major themes were identified, each of…

Application of Proteomics in Food Technology and Food Biotechnology: Process Development, Quality Control and Product Safety

Directory of Open Access Journals (Sweden)

Dajana Gašo-Sokač

2010-01-01

Full Text Available Human food is a very complex biological mixture and food processing and safety are very important and essential disciplines. Proteomics technology using different high-performance separation techniques such as two-dimensional gel electrophoresis, one-dimensional and multidimensional chromatography, combined with high-resolution mass spectrometry has the power to monitor the protein composition of foods and their changes during the production process. The use of proteomics in food technology is presented, especially for characterization and standardization of raw materials, process development, detection of batch-to-batch variations and quality control of the final product. Further attention is paid to the aspects of food safety, especially regarding biological and microbial safety and the use of genetically modified foods.

Investigational new drug safety reporting requirements for human drug and biological products and safety reporting requirements for bioavailability and bioequivalence studies in humans. Final rule.

Science.gov (United States)

2010-09-29

The Food and Drug Administration (FDA) is amending its regulations governing safety reporting requirements for human drug and biological products subject to an investigational new drug application (IND). The final rule codifies the agency's expectations for timely review, evaluation, and submission of relevant and useful safety information and implements internationally harmonized definitions and reporting standards. The revisions will improve the utility of IND safety reports, reduce the number of reports that do not contribute in a meaningful way to the developing safety profile of the drug, expedite FDA's review of critical safety information, better protect human subjects enrolled in clinical trials, subject bioavailability and bioequivalence studies to safety reporting requirements, promote a consistent approach to safety reporting internationally, and enable the agency to better protect and promote public health.

Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

CERN Document Server

International Electrotechnical Commission. Geneva

1998-01-01

This International Standard deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and mechanical safety. This standard covers the following types of dry-type transformers, power supplies, including switch mode power supplies, and reactors, the windings of which may be encapsulated or non-encapsulated. It has the status of a group safety publication in accordance with IEC Guide 104.

Identifying behaviour patterns of construction safety using system archetypes.

Science.gov (United States)

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2015-07-01

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers' conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Safety culture in nuclear installations. Management of safety and safety culture in Indian NPPs

International Nuclear Information System (INIS)

Rawal, S.C.

2002-01-01

Nuclear Power Corporation Of India Ltd. (NPCIL) is a company owned by Government of India and is responsible for Design, Construction, Commissioning, Operation and Decommissioning of Nuclear Power plants in India. Presently, a total of 13 Nuclear power Stations are in operation with an installed capacity of 2620 MWe and 2 VVR type PWR Units of 1000 MWe capacity each, 2 PHWR type units of 500 MWe capacity each and 4 PHWR type 220 MWe capacity each are under construction. NPPs generation capacity has been increased from 70% to 85% in the span Of last 7 years with high level of safety standards. This could be achieved through Management commitment towards building a strong Safety Culture. Safety culture is that assembly of characteristics and attitudes in organisation and individuals which establishes that as an overriding priority nuclear plant safety issues receives the attention warranted by their significance. This definition of safety culture brings out two major components in its manifestation. The framework within which individuals within the organisation works.The attitude and response of individual towards the safety issues over productivity and economics in the organisational work practices. The two attributes of safety culture are built in and upgraded in each individuals through special training at the time of entry in the organisation and later through in built procedures in the work practices, motivation and encouragement for free participation of each individuals. Individuals are encouraged to participate in Quality circle teams at the sectional level and review of safety proposal originated by individuals in Station operation Review Committee at Station level, in addition to this to continuously enhance the safety culture, refresher training courses are being organised at regular intervals. The safety related proposals are categorised in to two namely: Proposals from Operating Plants, and Proposals from projects and Design. The concept of safety

The necessity of periodic fire safety review

International Nuclear Information System (INIS)

Mowrer, D.S.

1998-01-01

Effective fire safety requires the coordinated integration of many diverse elements. Clear fire safety objectives are defined by plant management and/or regulatory authorities. Extensive and time-consuming systematic analyses are performed. Fire safety features (both active and passive) are installed and maintained, and administrative programs are established and implemented to achieve the defined objectives. Personnel are rigorously trained. Given the time, effort and monetary resources expended to achieve a specific level of fire safety, conducting periodic assessments to verify that the specified level of fire safety has been achieved and is maintained is a matter of common sense. Periodic fire safety reviews and assessment play an essential role in assuring continual nuclear safety in the world's power plants

Use of OECD/NEA Data Project Products in Probabilistic Safety Assessment

International Nuclear Information System (INIS)

Cherkas, G.; Raducu, Gheorghe; Riznic, J.; Yalaoui, S.; Huang, Hui-Wen; Holy, Jaroslav; Holmberg, Jan-Erik; Sandberg, Jorma; Balmain, Michel; Bonnevialle, Anne-Marie; Curnier, Florence; Georgescu, Gabriel; Lanore, Jeanne-Marie; Lindner, Arndt; Fujimoto, Haruo; Ahn, Kwang-Il; Hwang, Taesuk; Jang, Seung-Cheol; Husarcek, Jan; Kovacs, Zoltan; Vazquez, Teresa; Johanson, Gunnar; Liwaang, Bo; Nyman, Ralph; Dang, Vinh; Schoen, Gerhard; Brook, Kevin; Hamblen, David; Siu, Nathan; Sturzebecher, Karl; Tobin, Margaret; Wood, Jeff; Amri, Abdallah; Breest, Axel

2014-01-01

The Nuclear Energy Agency (NEA)/Committee for the Safety of Nuclear Installations' (CSNI) Working Group on Risk Assessment (WGRISK) is tasked with supporting the improved use of Probabilistic Safety Assessment (PSA) in risk informed regulation and safety management through the analysis of results and the development of perspectives regarding potentially important risk contributors and associated risk reduction strategies. The task consists of the following major activities: Development, distribution, and completion of survey questionnaires; Analysis of survey questionnaire results at a task workshop; Preparation of the final task report. The main objectives of this task, as proposed by WGRISK and approved by CSNI, are the following: - Identification and characterization of the current uses of OECD data project products and data in support of PSA. In this context, the term 'products' refers to data analysis results, technical reports, and other project outputs. - Identification and characterization of technical and programmatic characteristics that either support or impede use of data project products in PSA. This includes an assessment of which PSA parameters could be potentially estimated from the various data project products and gaps between available product information and PSA data needs. - Identification of recommendations for enhancing the usefulness of data project products and the coordination between WGRISK and the data projects. This task report consists of the following sections: - Chapter 1 Provides a general overview of motivation and approach used for this task. - Chapter 2 Describes scope and objectives of the task. - Chapter 3 Provides an overview of the ICDE, FIRE, OPDE/CODAP, and COMPSIS data projects. For each project, the project objectives, project history, data collection methodology and quality assurance, project status, example PSA Applications, and information related to project participation is provided. - Chapter 4 Describes the

Addressing Uniqueness and Unison of Reliability and Safety for a Better Integration

Science.gov (United States)

Huang, Zhaofeng; Safie, Fayssal

2016-01-01

Over time, it has been observed that Safety and Reliability have not been clearly differentiated, which leads to confusion, inefficiency, and, sometimes, counter-productive practices in executing each of these two disciplines. It is imperative to address this situation to help Reliability and Safety disciplines improve their effectiveness and efficiency. The paper poses an important question to address, "Safety and Reliability - Are they unique or unisonous?" To answer the question, the paper reviewed several most commonly used analyses from each of the disciplines, namely, FMEA, reliability allocation and prediction, reliability design involvement, system safety hazard analysis, Fault Tree Analysis, and Probabilistic Risk Assessment. The paper pointed out uniqueness and unison of Safety and Reliability in their respective roles, requirements, approaches, and tools, and presented some suggestions for enhancing and improving the individual disciplines, as well as promoting the integration of the two. The paper concludes that Safety and Reliability are unique, but compensating each other in many aspects, and need to be integrated. Particularly, the individual roles of Safety and Reliability need to be differentiated, that is, Safety is to ensure and assure the product meets safety requirements, goals, or desires, and Reliability is to ensure and assure maximum achievability of intended design functions. With the integration of Safety and Reliability, personnel can be shared, tools and analyses have to be integrated, and skill sets can be possessed by the same person with the purpose of providing the best value to a product development.

Dust control products at Hagerman National Wildlife Refuge, Texas: environmental safety and performance

Science.gov (United States)

Kunz, Bethany K.; Little, Edward E.

2015-01-01

Controlling fugitive dust while protecting natural resources is a challenge faced by all managers of unpaved roads. Unfortunately, road managers choosing between dust control products often have little objective environmental information to aid their decisions. To address this information gap, the U.S. Geological Survey and the U.S. Fish and Wildlife Service collaborated on a field test of three dust control products with the objectives of (a) evaluating product performance under real-world conditions, (b) verifying the environmental safety of products identified as practically nontoxic in laboratory tests, and (c) testing the feasibility of several environmental monitoring techniques for use in dust control tests. In cooperation with refuge staff and product vendors, three products (one magnesium chloride plus binder, one cellulose, and one synthetic fluid plus binder) were applied in July 2012 to replicated road sections at the Hagerman National Wildlife Refuge in Texas. These sections were monitored periodically for 12 months after application. Product performance was assessed by mobile-mounted particulate-matter meters measuring production of fugitive dust and by observations of road conditions. Environmental safety was evaluated through on-site biological observations and leaching tests with samples of treated aggregate. All products reduced dust and improved surface condition during those 12 months. Planned environmental measurements were not always compatible with day-to-day refuge management actions; this incompatibility highlighted the need for flexible biological monitoring plans. As one of the first field tests of dust suppressants that explicitly incorporated biological endpoints, this effort provides valuable information for improving field tests and for developing laboratory or semifield alternatives.

Technical safety Organisations (TSO) contribute to European Nuclear Safety

International Nuclear Information System (INIS)

Repussard, J.

2010-01-01

Nuclear safety and radiation protection rely on science to achieve high level prevention objectives, through the analysis of safety files proposed by the licensees. The necessary expertise needs to be exercised so as to ensure adequate independence from nuclear operators, appropriate implementation of state of the art knowledge, and a broad spectrum of analysis, adequately ranking the positive and negative points of the safety files. The absence of a Europe-wide nuclear safety regime is extremely costly for an industry which has to cope with a highly competitive and open international environment, but has to comply with fragmented national regulatory systems. Harmonization is therefore critical, but such a goal is difficult to achieve. Only a gradual policy, made up of planned steps in each of the three key dimensions of the problem (energy policy at EU level, regulatory harmonization, consolidation of Europe-wide technical expertise capability) can be successful to achieve the required integration on the basis of the highest safety levels. TSO's contribute to this consolidation, with the support of the EC, in the fields of research (EURATOM-Programmes), of experience feedback analysis (European Clearinghouse), of training and knowledge management (European Training and Tutoring Institute, EUROSAFE). The TSO's network, ETSON, is becoming a formal organisation, able to enter into formal dialogue with EU institutions. However, nuclear safety nevertheless remains a world wide issue, requiring intensive international cooperation, including on TSO issues. (author)

Towards a decision support system for control of multiple food safety hazards in raw milk production

NARCIS (Netherlands)

Spiegel, van der M.; Sterrenburg, P.; Haasnoot, W.; Fels-Klerx, van der H.J.

2013-01-01

Decision support systems (DSS) for controlling multiple food safety hazards in raw milk production have not yet been developed, but the underlying components are fragmentarily available. This article presents the state-of-the-art of essential DSS elements for judging food safety compliance of raw

The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery.

Science.gov (United States)

Toomey, Paul G; Ross, Sharona B; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael; Rosemurgy, Alexander S

2015-01-01

As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. LESS surgery courses that involved didactic lectures, operative videos, operation observation, collaborative learning, and simulation, were attended by 226 surgeons. With Florida Hospital Tampa Institutional Review Board approval, the surgeons were queried before and immediately after the course, to assess their attitudes toward LESS surgery. Then, well after the course, the surgeons were contacted, repeatedly if necessary, to complete questionnaires. Before the course, 82% of the surgeons undertook more than 10 laparoscopic operations per month. Immediately after the course, 86% were confident that they were prepared to perform LESS surgery. Months after the course, 77% of the respondents had adopted LESS surgery, primarily cholecystectomy; 59% had added 1 or more trocars in 0-20% of their procedures; and 73% held the opinion that operating room observation was the most helpful learning experience. Complications with LESS surgery were noted 12% of the time. Advantages of the technique were better cosmesis (58%) and patient satisfaction (38%). Disadvantages included risk of complications (37%) and higher technical demand (25%). Seventy-eight percent viewed LESS surgery as an advancement in surgical technique. In multifaceted product safety courses, operating room observation is thought to provide the most helpful instruction for those wanting to undertake LESS surgery. The procedure has been safely adopted by surgeons who frequently perform laparoscopies. The tradeoff is in performing a more difficult technique to obtain better

Documentation of pediatric drug safety in manufacturers' product monographs: a cross-sectional evaluation of the canadian compendium of pharmaceuticals and specialities.

Science.gov (United States)

Uppal, Navjeet K; Dupuis, Lee L; Parshuram, Christopher S

2008-01-01

To describe the provision of pediatric drug safety information in a national formulary of manufacturers' drug product monographs. We performed a cross-sectional evaluation of comprehensive product monographs contained in the 2005 Canadian Compendium of Pharmaceuticals and Specialities (CPS). We abstracted data describing indications for prescription, statements about pediatric safety, available preparations, and provision of dosing guidelines. For each monograph we classified pediatric safety data as either present, present but limited or absent. We then described the pediatric safety data in CPS monographs for drugs listed in the published formulary of the Hospital for Sick Children, Toronto, Ontario, Canada. A total of 2232 product monographs were screened; 684 were excluded and 1548 (66%) were further analyzed. 1462 (94%) had indications that did not exclude children. Pediatric safety information was present in 592 (38%), present but limited in 148 (10%), and absent in 808 (52%) drug monographs. Safety statements were absent in 224 (14%) drug monographs that provided both dosing guidelines and formulations suitable for administration to children, and in 214 (52%) of 411 drugs in the pediatric hospital formulary. We evaluated a widely available national source of pediatric prescribing information. Safety data for children was not mentioned in more than half of the product monographs. Moreover, the provision of safety data was discordant with indications for prescription, the availability of pediatric formulations, and dosing guidelines within the monographs, and with inclusion in a pediatric hospital formulary. Our study suggests that the presentation of pediatric safety data in drug product monographs can be improved to better inform prescribing and to optimize pharmacotherapy in children.

Methodology and analysis of production safety during Pu recycling at SSC RF RIAR

International Nuclear Information System (INIS)

Kirillovich, A.P.

2000-01-01

The methodology and criteria for estimating safety in technological processes of the nuclear fuel cycle (NFC) are proposed, substantiated and verified during the large-scale Pu recycling (500 kg). The comprehensive investigation results of the radiation-ecological situation are presented during pilot production of the mixed uranium-plutonium fuel and fuel assembly at SSC RF RIAR. The methodology and experimental data bank can be used while estimating safety in the industrial recycling of Pu and minor-actinides (Np, Am, Cm) in NFC. (author)

Quality and safety of products containing Ephedra Herba on the Dutch market

OpenAIRE

Lake OA; Slijkhuis C; Maas WF; Vliet MEA van; Kaste D de; Verdonk-Kleinjan W; Keuringsdienst van Waren, regio Zuid; LGO

2001-01-01

We performed analytical studies on dietary supplements and smart products containing Ephedra herba on the Dutch market. Such products are labelled 'from natural, herbal sources' and do not fall under Dutch Medicines Act. Most of the samples tested from 1993 to 1999 contained unacceptably large amounts of ephedrine (EP) alkaloids (the active substances of Ephedra herba) in relation to the safety criteria in the literature. Some samples also contained an effect-enhancing substance (e.g. coffein...

Safety considerations for continuous hydrogen production test apparatus with capacity of 50 N-litter hydrogen per hour

International Nuclear Information System (INIS)

Onuki, Kaoru; Akino, Norio; Shimizu, Saburo; Nakajima, Hayato; Higashi, Shunichi; Kubo, Shinji

2001-03-01

Since the thermochemical hydrogen production Iodine-Sulfur process decomposes water into hydrogen and oxygen using toxic chemicals such as sulfuric acid, iodine and hydriodic acid, safety considerations are very important in its research and development. Therefore, before construction of continuous hydrogen production test apparatus with capacity of 50 N-litter hydrogen per hour, comprehensive safety considerations were carried out to examine the design and construction works of the test apparatus, and the experimental plans using the apparatus. Emphasis was given on the safety considerations on prevention of breakage of glasswares and presumable abnormalities, accidents and their countermeasures. This report summarizes the results of the considerations. (author)

The assesment on safety distance determination of hydrogen production plant with RGTT200K reactor

International Nuclear Information System (INIS)

Siti Alimah; Sriyono

2013-01-01

The one of the hydrogen production process method coupled to RGTT200K is the utilization of steam reforming with (methane) natural gas as the feedstock. The integration between RGTT200K and hydrogen plant must consider many safety aspects and one of it is separation distance between these two systems. The purpose of this assessment is to study the sources of fires/explosion and to determine the safety distance between the steam reforming hydrogen production plant and RGTT200K reactor. The used methodology was literature assessment and safety distance calculation with equation R = k.W 1/3 . In this studi, safety distance determination in integration between RGTT200K and hydrogen plant was using equation based on reference of the USNRC Regulatory Guide 1.91 and mass on the equation was mass equivalent of TNT (kg). The results of the study show the hydrogen plant produces 160.000 m 3 /day, if requires storage tanks of 400.000 m 3 (based USNRC equal to 1.859 million tons of TNT equivalent) with factor k is 8, based on the equation R = k.W 1/3 , so the requirement for safety distance is 1 km. This distance may be shortened by adding a fire proof wall barrier and requires further assessment. (author)

Safety conditions and native microbial flora of three processing units in Alentejo , Portugal

OpenAIRE

Laranjo, Marta; Potes, M.E; Elias, M.

2014-01-01

Portugal as other Mediterranean countries has a great diversity of dry fermented sausages. This traditional sausage production is highly diverse and products possess very particular organoleptic characteristics, which please consumers. These sensory characteristics are related not only to the manufacturing process, but also to the house microbial flora. On the other hand, the safety of fermented products is always difficult to achieve due to their processing technology and final characteristi...

Approaches to achieving inherently safe fusion power plants

International Nuclear Information System (INIS)

Piet, S.J.

1986-01-01

Achieving inherently safe fusion facilities and conceptual designs is a challenge to the fusion community. Success should provide fusion with important competitive advantages versus other energy technologies. Inherent safety should mean a facility designed with passive safety features such that the public is protected from any acute fatalities under all credible accidental circumstances. A key aspect to inherent safety is demonstrability - the ability to prove that a deign is as safe as claimed. Three complementary approaches to achieving inherent safety are examined: toxin inventory reduction, energy source reduction and design fault tolerance. Four levels of assurance are defined, associated with uncertainty in the words ''credible' and ''demonstrable.'' Sound reasons exist for believing that inherent safety puts a modest upper bound on all accident consequences; it should be considered a part of the collection of safety and environmental issues, which also include lower consequence accidents, waste management, and effluent control

Safety of magnetic fusion facilities: Requirements

International Nuclear Information System (INIS)

1996-05-01

This Standard identifies safety requirements for magnetic fusion facilities. Safety functions are used to define outcomes that must be achieved to ensure that exposures to radiation, hazardous materials, or other hazards are maintained within acceptable limits. Requirements applicable to magnetic fusion facilities have been derived from Federal law, policy, and other documents. In addition to specific safety requirements, broad direction is given in the form of safety principles that are to be implemented and within which safety can be achieved

Conference: Nuclear Safety at the Ignalina NPP - Achievements and Challenges

International Nuclear Information System (INIS)

1999-01-01

Brief description of conference which took place in Vilnius on 8-9 April 1999 is presented. The aim of the international conference is to review the work carried out, to evaluate its influence on the nuclear safety, to get acquainted with the safety system of the Ignalina NPP. On December 31, the Ignalina NPP celebrated its 15 year anniversary. During that period the Ignalina NPP has produced more than 182 billion kWh of electricity. Nuclear power is not only immense economic benefit but also a syndrome of fear of an atomic bomb and the Chernobyl accident that has formed over the years. Numerous comprehensive international studies have been performed at the Ignalina NPP. After the Chernobyl accident many steps have been taken to improve the safety of the Ignalina NPP. The introduced changes guaranteed that the void coefficient remained negative in all possible circumstances. The Ignalina NPP is intensively preparing for licensing of unit 1

The Readership of Liquor Ads Employing Appeals to Affiliation, Achievement, and Product-Attributes.

Science.gov (United States)

Reid, Leonard N.; And Others

A study examined whether advertising appeals based on product affiliation, achievement, and attributes would account for differences in male readership of liquor advertisements. The investigation focused on the relationship between the content of alcholic beverage advertisements and attention engagement, the first state in consumer information…

Growth of safety, health and environmental consciousness amongst IREL units for all round development

International Nuclear Information System (INIS)

Das, A.K.

2005-01-01

Indian Rare Earths Limited (IREL) has four operating plants located at Chatrapur in Orissa, Chavara, Udyogamandal in Kerala and Manavalakurichi in Tamilnadu engaged in production of beach sand minerals viz. ilmenite, rutile, zircon, monazite and garnet etc. and value added products like rare earths chemicals and thorium nitrate etc.. The mission of IREL is to be a major supplier of beach sand minerals and rare earths compounds in the domestic and international market as well as produce value added materials of strategic importance with due regard to resource utilization, safety and environmental protection. Success of safety programme in such industrial activities depends on the co-operation among all level of employees and through team efforts. Industrial safety is not only crucial for protection of workforce but also for the increased productivity. The Company has experienced and qualified professionals in safety, environment and occupational health. They are continuously striving to achieve excellence in the status of safety, health and environment. Surveillance of IREL plants is undertaken by regulatory/statutory authorities like Atomic Energy Regulatory Board (AERB), Director General of Mines Safety (DGMS), State Pollution Control Board (SPCB), etc

Are safety data sheets for cleaning products used in Norway a factor contributing to the risk of workers exposure to chemicals?

Directory of Open Access Journals (Sweden)

Abdulqadir M. Suleiman

2014-10-01

Full Text Available Objectives: Cleaning products are considered less hazardous than those used in other sectors. Suppliers and distributors are less conscientious when it comes to informing users on health risks. The aim of the study was to elaborate on the usefulness and clarity of information in the safety data sheets (SDS for cleaning products, and considering if the use of these SDSs can be seen as a risk factor towards occupational exposure to hazardous chemicals in the sector. Material and Methods: Safety data sheets were selected based on the risk level of the product assigned in an industrial sector scheme. 320 SDSs for cleaning products were reviewed. Constituent components found in the products over a given threshold were listed and available information thereof used to assess the perceived non-hazard consideration of the chemicals. Results: The contents of the SDSs was generic and mostly incomplete. Safety measures and health information lacked sufficient specificity despite varying compositions and concentrations of components. There is generally incompatibility between mentioned sections on the suggested non-hazardous nature of the products and health effects. Not all substances used in these products have harmonized classifications, which makes them open to various classification of the products and the suggested safety measures. This results in different companies classifying similar products differently. Risk management measures and suggested personal protective equipment (PPEs are given haphazardly. Physical properties relevant to risk assessment are not included. Conclusions: The safety data sheets are ambiguous, and they lack relevant and important information. Inadequate information and risk assessment concerning the products can lead to workers being exposed to hazardous chemicals. Underestimation of the hazard contribution of the components of the products and the insufficient, non-objective mention of appropriate control and protective

Safety concerns of herbal products and traditional Chinese herbal medicines: dehydropyrrolizidine alkaloids and aristolochic acid.

Science.gov (United States)

Stegelmeier, Bryan L; Brown, Ammon W; Welch, Kevin D

2015-12-01

In many countries, including the United States, herbal supplements, tisanes and vegetable products, including traditional Chinese medicines, are largely unregulated and their content is not registered, monitored or verified. Consequently, potent plant toxins including dehydropyrrolizidine alkaloids and other potential carcinogens can contaminate these products. As herbal and food supplement producers are left to their own means to determine the safety and purity of their products prior to marketing, disturbingly often good marketing practices currently in place are ignored and content is largely undocumented. Historical examples of poisoning and health issues relating to plant material containing dehydopyrrolizidine alkaloids and aristolochic acids were used as examples to demonstrate the risk and potential toxicity of herbal products, food supplements, or traditional medicines. More work is needed to educate consumers of the potential risk and require the industry to be more responsible to verify the content and insure the safety of their products. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Relating safety, productivity and company type for motor-manual logging operations in the Italian Alps.

Science.gov (United States)

Montorselli, Niccolò Brachetti; Lombardini, Carolina; Magagnotti, Natascia; Marchi, Enrico; Neri, Francesco; Picchi, Gianni; Spinelli, Raffaele

2010-11-01

The study compared the performance of four different logging crews with respect to productivity, organization and safety. To this purpose, the authors developed a data collection method capable of providing a quantitative analysis of risk-taking behavior. Four crews were tested under the same working conditions, representative of close-to-nature alpine forestry. Motor-manual working methods were applied, since these methods are still prevalent in the specific study area, despite the growing popularity of mechanical processors. Crews from public companies showed a significantly lower frequency of risk-taking behavior. The best safety performance was offered by the only (public) crew that had been administered formal safety training. The study seems to deny the common prejudice that safety practice is inversely proportional to productivity. Instead, productivity is increased by introducing more efficient working methods and equipment. The quantitative analysis of risk-taking behavior developed in this study can be applied to a number of industrial fields besides forestry. Characterizing risk-taking behavior for a given case may eventually lead to the development of custom-made training programmes, which may address problem areas while avoiding that the message is weakened by the inclusion of redundant information. In the specific case of logging crews in the central Alps, the study suggests that current training courses may be weak on ergonomics, and advocates a staged training programme, focusing first on accident reduction and then expanding to the prevention of chronic illness. 2010 Elsevier Ltd. All rights reserved.

Beyond safety accountability

CERN Document Server

Geller, E Scott

2001-01-01

Written in an easy-to-read conversational tone, Beyond Safety Accountability explains how to develop an organizational culture that encourages people to be accountable for their work practices and to embrace a higher sense of personal responsibility. The author begins by thoroughly explaining the difference between safety accountability and safety responsibility. He then examines the need of organizations to improve safety performance, discusses why such performance improvement can be achieved through a continuous safety process, as distinguished from a safety program, and provides the practic

Theoretical investigation of biomass productivities achievable in solar rectangular photobioreactors for the cyanobacterium Arthrospira platensis.

Science.gov (United States)

Pruvost, Jeremy; Cornet, J F; Goetz, Vincent; Legrand, Jack

2012-01-01

Modeling was done to simulate whole-year running of solar rectangular photobioreactors (PBRs). Introducing the concept of ideal reactor, the maximal biomass productivity that could be achieved on Earth on nitrate as N-source was calculated. Two additional factors were also analyzed with respect to dynamic calculations over the whole year: the effect of PBR location and the effects of given operating conditions on the resulting decrease in productivity compared with the ideal one. Simulations were conducted for the cyanobacterium Arthospira platensis, giving an ideal productivity (upper limit) in the range 55-60 tX ha(-1) year(-1) for a sun tracking system (and around 35-40 tX ha(-1) year(-1) for a fixed horizontal PBR). For an implantation in France (Nantes, west coast), the modification in irradiation conditions resulted in a decrease in biomass productivity of 40%. Various parameters were investigated, with special emphasis on the influence of the incident angle of solar illumination on resulting productivities, affecting both light capture and light transfer inside the bulk culture. It was also found that with appropriate optimization of the residence time as permitted by the model, productivities close to maximal could be achieved for a given location. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

Safety features of subcritical fluid fueled systems

International Nuclear Information System (INIS)

Bell, C.R.

1995-01-01

Accelerator-driven transmutation technology has been under study at Los Alamos for several years for application to nuclear waste treatment, tritium production, energy generation, and recently, to the disposition of excess weapons plutonium. Studies and evaluations performed to date at Los Alamos have led to a current focus on a fluid-fuel, fission system operating in a neutron source-supported subcritical mode, using molten salt reactor technology and accelerator-driven proton-neutron spallation. In this paper, the safety features and characteristics of such systems are explored from the perspective of the fundamental nuclear safety objectives that any reactor-type system should address. This exploration is qualitative in nature and uses current vintage solid-fueled reactors as a baseline for comparison. Based on the safety perspectives presented, such systems should be capable of meeting the fundamental nuclear safety objectives. In addition, they should be able to provide the safety robustness desired for advanced reactors. However, the manner in which safety objectives and robustness are achieved is very different from that associated with conventional reactors. Also, there are a number of safety design and operational challenges that will have to be addressed for the safety potential of such systems to be credible

Safety features of subcritical fluid fueled systems

International Nuclear Information System (INIS)

Bell, C.R.

1994-01-01

Accelerator-driven transmutation technology has been under study at Los Alamos for several years for application to nuclear waste treatment, tritium production, energy generation, and recently, to the disposition of excess weapons plutonium. Studies and evaluations performed to date at Los Alamos have led to a current focus on a fluid-fuel, fission system operating in a neutron source-supported subcritical mode, using molten salt reactor technology and accelerator-driven proton-neutron spallation. In this paper, the safety features and characteristics of such systems are explored from the perspective of the fundamental nuclear safety objectives that any reactor-type system should address. This exploration is qualitative in nature and uses current vintage solid-fueled reactors as a baseline for comparison. Based on the safety perspectives presented, such systems should be capable of meeting the fundamental nuclear safety objectives. In addition, they should be able to provide the safety robustness desired for advanced reactors. However, the manner in which safety objectives and robustness are achieved in very different from that associated with conventional reactors. Also, there are a number of safety design and operational challenges that will have to be addressed for the safety potential of such systems to be credible

Safety features of subcritical fluid fueled systems

Energy Technology Data Exchange (ETDEWEB)

Bell, C.R. [Los Alamos National Laboratory, NM (United States)

1995-10-01

Accelerator-driven transmutation technology has been under study at Los Alamos for several years for application to nuclear waste treatment, tritium production, energy generation, and recently, to the disposition of excess weapons plutonium. Studies and evaluations performed to date at Los Alamos have led to a current focus on a fluid-fuel, fission system operating in a neutron source-supported subcritical mode, using molten salt reactor technology and accelerator-driven proton-neutron spallation. In this paper, the safety features and characteristics of such systems are explored from the perspective of the fundamental nuclear safety objectives that any reactor-type system should address. This exploration is qualitative in nature and uses current vintage solid-fueled reactors as a baseline for comparison. Based on the safety perspectives presented, such systems should be capable of meeting the fundamental nuclear safety objectives. In addition, they should be able to provide the safety robustness desired for advanced reactors. However, the manner in which safety objectives and robustness are achieved is very different from that associated with conventional reactors. Also, there are a number of safety design and operational challenges that will have to be addressed for the safety potential of such systems to be credible.

Application of HACCP system in the ice cream production

Directory of Open Access Journals (Sweden)

Meho Bašić

2005-01-01

Full Text Available For enhancement of quality in all production segments, the ice cream factory «SA&JACOM» Sarajevo has made a decision to introduce a system of quality control and health safety for all of its products.Possible critical control points were analyzed and successfully specified, with hazard reduction to tolerant level, and in some cases with total hazard elimination. Using HACCP methodology, it is expected that the factory will produce the ice-creams with reliable preliminary established quality and accepted level of hygienic and health safety. All the activities are applied in a precise and documented way, so the products of this factory achieve trust of the customers and provide an official production certificate.

Safety management of a high energy accelerator used in the production of tritium

International Nuclear Information System (INIS)

Stark, R.M.; Brown, N.W.; Allen C.L.

1997-01-01

Interest in a high energy accelerator for producing tritium raises considerations regarding facility Safety Management. Accelerator facility hazards require safety analysis to consider factors such as: safe management of a large flux of very high energy neutrons, sustained operation in a very high energy proton and neutron field, neutron irradiation of a variety of materials, and handling and processing of significant quantities of tritium. Safety considerations of support systems and potential effects of magnetic fields must also be included. Existing Safety Management techniques, safety standards, and criteria for operation of high energy accelerators provide considerable guidance. These must, however, be reviewed to determine their appropriate use for safe operation of a very large, tritium-producing accelerator. New or revised safety standards may be required to establish and maintain the safe operating-envelope. The goal will be to develop a set of tailored standards and criteria that provide a reasonable operational envelope and assure adequate public, worker, and environmental safety. The generation of an appropriate set of safety standards and criteria will include several activities. One activity will involve evaluation of proposed facility designs to determine possible hazards. Another activity will involve a detailed review of existing accelerator safety management systems. A third activity will involve the review of operating histories of existing facilities. Facilities approximating the characteristics of the anticipated tritium production facility will be considered. Following completion of these activities a proposed Safety Management System and criteria for application to these facilities will be drafted. The need for new analytical methods and for additional safety standards will be identified. The draft document will then be reviewed and revised to establish the standards and criteria within the appropriate Department of Energy framework

Safety culture activities in HANARO

International Nuclear Information System (INIS)

Lim, I. C.; Park, C.; Hwang, S. R.; Choi, H. Y.; Jeon, B. J.

2002-01-01

The yearly operation time and the number of users in HANARO are increasing since its initial criticality has been achieved in 1995. This achievement is partly in debt to the spread of safety culture to operators and reactor users. In this paper, the activities done by the reactor operation organization on safety culture are described, and their further efforts identified to be necessary for the improvement and dissemination of safety culture and are presented

Effectiveness of creative and productive instructional method towards students' learning achievement in steel structure course

Science.gov (United States)

Sugiyanto, Pribadi, Supriyanto, Bambang

2017-09-01

The purpose of this study was to investigate the effectiveness of Creative & Productive instructional method compared with conventional method. This research was a quasi-experimental study involving all Civil Engineering students at Universitas Negeri Malang who were taking a course of Steel Structure. The students were randomly assigned to two different treatment groups, 30 students in experimental group and 37 students in the control group. It was assumed that these groups were equal in all relevant aspects; they differed only in the treatment administered. We used the t-test to test the hypothesis. The results of this research suggest that: (l) the use of Creative & Productive instructional method can significantly improve students' learning achievement, (2) the use of Creative & Productive instructional method can significantly improve students' retention, (3) students' motivation has a significant effect on their learning achievement, and (4) students' motivation has a significant effect on their retention.

Permitting product liability litigation for FDA-approved drugs and devices promotes patient safety.

Science.gov (United States)

Kesselheim, A S

2010-06-01

In 2008 and 2009, the Supreme Court reviewed the question of whether patients injured by dangerous prescription drugs or medical devices can bring tort lawsuits against pharmaceutical and device manufacturers. The Court ruled that claims against device manufacturers were preempted while claims against pharmaceutical manufacturers were not. The threat of product liability lawsuits promotes patient safety by encouraging manufacturers to take greater responsibility in providing clear warnings about known adverse effects of their products.

The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery

Science.gov (United States)

Toomey, Paul G.; Ross, Sharona B.; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael

2015-01-01

Background and Objectives: As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. Methods: LESS surgery courses that involved didactic lectures, operative videos, operation observation, collaborative learning, and simulation, were attended by 226 surgeons. With Florida Hospital Tampa Institutional Review Board approval, the surgeons were queried before and immediately after the course, to assess their attitudes toward LESS surgery. Then, well after the course, the surgeons were contacted, repeatedly if necessary, to complete questionnaires. Results: Before the course, 82% of the surgeons undertook more than 10 laparoscopic operations per month. Immediately after the course, 86% were confident that they were prepared to perform LESS surgery. Months after the course, 77% of the respondents had adopted LESS surgery, primarily cholecystectomy; 59% had added 1 or more trocars in 0–20% of their procedures; and 73% held the opinion that operating room observation was the most helpful learning experience. Complications with LESS surgery were noted 12% of the time. Advantages of the technique were better cosmesis (58%) and patient satisfaction (38%). Disadvantages included risk of complications (37%) and higher technical demand (25%). Seventy-eight percent viewed LESS surgery as an advancement in surgical technique. Conclusion: In multifaceted product safety courses, operating room observation is thought to provide the most helpful instruction for those wanting to undertake LESS surgery. The procedure has been safely adopted by surgeons who frequently perform laparoscopies. The tradeoff is in

Nuclear safety in Slovak Republic. Regulatory aspects of NPP nuclear safety

International Nuclear Information System (INIS)

Lipar, M.

1999-01-01

Regulatory Authority (UJD) is appointed by the Slovak Republic National Council as an Executive Authority for nuclear safety supervision. Nuclear safety legislation, organisation and resources of UJD, its role and responsibilities are described together with its inspection and licensing functions and International cooperation concerning improvements of safety effectiveness. Achievements of UJD are listed in detail

Achieving excellence in human performance through leadership, education, and training in nuclear power industry

International Nuclear Information System (INIS)

Clark, C.R.; Kazennov, A.; Kossilov, A.; Mazour, T.; Yoder, J.

2004-01-01

Full text: In order to achieve and maintain high levels of safety and productivity, nuclear power plants are required to be staffed with an adequate number of highly qualified and experienced personnel who are duly aware of the technical and administrative requirements for safety and are motivated to adopt a positive attitude to safety, as an element of safety culture. To establish and maintain a high level of human performance, appropriate education and training programmes should be in place and kept under constant review to ensure their relevance. As the nuclear power industry continues to be challenged by increasing safety requirements, a high level of competition and decreasing budgets, it becomes more important than ever to maintain excellence in human performance and ensure that NPP personnel training provides a value to the organization. Nuclear industry managers and supervisors bear the primary responsibility to assure that people perform their jobs safely and effectively. Training personnel must be responsive to the needs of the organization, working hand-in-hand with line managers and supervisors to ensure that human performance improvement needs are properly analyzed, and that training as well as other appropriate interventions are developed and implemented in the most effective and efficient way possible. The International Atomic Energy Agency together with its Member States has provided for coordinated information exchange and developed guidance on methods and practices to identify and improve the effectiveness NPP personnel training. This has resulted in: plant performance improvements, improved human performance, meeting goals and objectives of the business (quality, safety, productivity), and more effective training programs. This article describes the IAEA activities and achievements in the subject area for systematically understanding and improving human performance in nuclear power industry. The article also describes cooperation programmes

Yeasts in foods and beverages: impact on product quality and safety.

Science.gov (United States)

Fleet, Graham H

2007-04-01

The role of yeasts in food and beverage production extends beyond the well-known bread, beer and wine fermentations. Molecular analytical technologies have led to a major revision of yeast taxonomy, and have facilitated the ecological study of yeasts in many other products. The mechanisms by which yeasts grow in these ecosystems and impact on product quality can now be studied at the level of gene expression. Their growth and metabolic activities are moderated by a network of strain and species interactions, including interactions with bacteria and other fungi. Some yeasts have been developed as agents for the biocontrol of food spoilage fungi, and others are being considered as novel probiotic organisms. The association of yeasts with opportunistic infections and other adverse responses in humans raises new issues in the field of food safety.

Nuclear plant operation: achieving excellence through quality

Energy Technology Data Exchange (ETDEWEB)

Bergstrom, L [Barseback Nuclear Power Plant (Sweden); Bergeron, J P [Electricite de France (EDF), 75 - Paris (France); Coakley, W [and others

1992-07-01

Nuclear power operation is characterised by a very high level of safety and availability resulting in economically competitive electricity production. This achievement must not only be maintained but must be further developed if nuclear power is to regain momentum in the light of its widely recognized environmental advantages. Therefore this meeting bring together all those, managers and technical staff, responsible for the operation of the nuclear in order to allow them to exchange views, experience and knowledge on fundamental aspects such as: management philosophy, quality assurance, human resources and international co-operation; focusing on training (incident analysis and management), human factors and experience feedback; maintenance philosophy, life extension and upgrading, organisation and administration. (A.L.B.)

Nuclear plant operation: achieving excellence through quality

International Nuclear Information System (INIS)

Bergstrom, L.; Bergeron, J.P.; Coakley, W.

1992-01-01

Nuclear power operation is characterised by a very high level of safety and availability resulting in economically competitive electricity production. This achievement must not only be maintained but must be further developed if nuclear power is to regain momentum in the light of its widely recognized environmental advantages. Therefore this meeting bring together all those, managers and technical staff, responsible for the operation of the nuclear in order to allow them to exchange views, experience and knowledge on fundamental aspects such as: management philosophy, quality assurance, human resources and international co-operation; focusing on training (incident analysis and management), human factors and experience feedback; maintenance philosophy, life extension and upgrading, organisation and administration. (A.L.B.)

Safety and security profiles of industry networks used in safety- critical applications

Directory of Open Access Journals (Sweden)

Mária FRANEKOVÁ

2008-01-01

Full Text Available The author describes the mechanisms of safety and security profiles of industry and communication networks used within safety – related applications in technological and information levels of process control recommended according to standards IEC 61784-3,4. Nowadays the number of vendors of the safety – related communication technologies who guarantees besides the standard communication, the communication amongst the safety – related equipment according to IEC 61508 is increasing. Also the number of safety – related products is increasing, e. g. safety Fieldbus, safety PLC, safety curtains, safety laser scanners, safety buttons, safety relays and other. According to world survey the safety Fieldbus denoted the highest growth from all manufactured safety products.The main part of this paper is the description of the safety-related Fieldbus communication system, which has to guaranty Safety Integrity Level.

78 FR 10181 - Global Quality Systems-An Integrated Approach To Improving Medical Product Safety; Public Workshop

Science.gov (United States)

2013-02-13

...] Global Quality Systems--An Integrated Approach To Improving Medical Product Safety; Public Workshop... (AFDO), is announcing a public workshop entitled ``Global Quality Systems--An Integrated Approach to... topics concerning FDA requirements related to the production and marketing of drugs and/or devices...

Inherent/passive safety in fusion power plants

International Nuclear Information System (INIS)

Piet, S.J.; Crocker, J.G.

1986-01-01

The concept of inherent or passive safety for fusion energy is explored, defined, and partially quantified. Four levels of safety assurance are defined, which range from true inherent safety to passive safety to protection via active engineered safeguard systems. Fusion has the clear potential for achieving inherent or passive safety, which should be an objective of fusion research and design. Proper material choice might lead to both inherent/passive safety and high mass power density, improving both safety and economics. When inherent or passive safety is accomplished, fusion will be well on the way to achieving its ultimate potential and to be a truly superior energy source for the future

Behavior based safety

International Nuclear Information System (INIS)

Sudhikumaran, T.V.; Mehta, S.C.; Goyal, D.K.

2009-01-01

Behaviour Based Safety (popularly known as BBS) is a new methodology for achieving injury free work place and total Safety Culture. BBS is successfully being implemented and is being practiced as a work methodology for achieving a loss and injury free work environment and work practice. Through BBS, it was brought out that the root causes of all Industrial accidents some how originate from the 'at risk' behaviour of some individual or group of individuals at some level. The policy of NPCIL is to excel in the field of Industrial and Fire Safety in comparison to international standards. This article indents to bring out the various parameters helping in installing BBS programme at any plant. (author)

Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

Proposal of safety design methodologies for an HTGR-hydrogen production system. Mainly on countermeasures against fire and explosion

International Nuclear Information System (INIS)

Nishihara, Tetsuo; Hada, Kazuhiko; Shiozawa, Syusaku

1996-03-01

Among key issues of the safety design for an HTGR-hydrogen production system is to ensure the safety of the nuclear reactor against fire and explosion accidents in the hydrogen production plant. The fire and explosion accidents in the hydrogen production plant are categorized into the following two cases; Accidents inside the reactor building (R/B) and accidents outside the R/B. Against accidents inside the R/B, the proposed safety design concept is to prevent the occurrence of the accidents based on the defence in depth concept. The piping system and/or heat transfer tubes which have the potential possibility of combustible materials ingress into the R/B due to the failure are designed at the highest aseismic level to prevent the failure against severe earthquake. Even if the failure occurs, the piping trench and related compartments are fulfilled with nitrogen so as to prevent the occurrence of accidents. The proposed safety design concept for the accidents outside the R/B is the mitigation of effects of accidents. Proposed countermeasures is to take the safe distance between the hydrogen production plant and the items important to safety in the nuclear plant. We showed that the anticipated accidents to estimate the safe distance are large scale pool burning, fireball, pressure vessel burst and vapor cloud explosion. Especially, new estimating concept to establish the safe distance is proposed for the vapor cloud explosion. To reduce the safe distance, we proposed the underground non-pressurized storage tank and ventilation system for the storage of large amount of combustible liquid. (author). 61 refs

How to achieve synergy between volume replacement and filling products for global facial rejuvenation.

Science.gov (United States)

Raspaldo, Hervé; Aziza, Richard; Belhaouari, Lakhdar; Berros, Philippe; Body, Sylvie; Galatoire, Olivier; Le Louarn, Claude; Michaud, Thierry; Niforos, François; Rousseaux, Isabelle; Runge, Marc; Taieb, Maryna

2011-04-01

The objective of this paper is to provide an expert consensus regarding facial rejuvenation using a combination of volume replacement (Juvéderm(®) VOLUMA(®)), filling products (Juvéderm(®) Ultra product line) and botulinum toxin. The Juvéderm product line exploits innovative 3-D technology, producing a range of cohesive, homogenous gels that produce predictable, long-lasting and natural results. The products are easy to use by practitioners and are well-tolerated by patients, and used in combination can provide additional benefits not achieved with one product alone. An assessment of facial anatomy and consideration of the aging process, as well as available treatment options, are also addressed in determining the best combination of products to use. Outcomes from a questionnaire and workshop sessions focusing on specific aspects of use of the Juvéderm product line and botulinum toxin in daily clinical practice are discussed, and recommendations for product use following debate amongst the experts are provided.

Chemical Companies to Explore in the Production Process Safety Management Issues%化工企业在生产过程中的安全管理问题探讨

Institute of Scientific and Technical Information of China (English)

吴飞

2016-01-01

在社会经济快速发展的背景下，企业的规模和数量不断扩增，生产和管理已经成为企业的重要工作。化工企业作为现代化社会发展中的重要部分，在其实际生产和发展的过程中，需要充分认识到安全生产管理的重要性，严格执行以人为本的生产理念，加强生产过程的安全管理，从而实现自身的可持续发展。对化工企业在生产过程中的安全管理问题进行分析，并提出有效对策，以便相关人士借鉴和参考。%In the context of rapid economic development,enterprise size and the number continues to amplify,production and management has become an important work of the enterprise.Chemical companies as a modern social development,an important part in the process of its actual production and development,the need to fully recognize the importance of safety in production management, strict implementation of people-oriented concept of the production,strengthen the safety management of the production process in order to achieve their own sustainable development.On the chemical safety management problems in the production process were analyzed and tentatively few effective measures to stakeholders as reference.

Leachables and extractables handbook: safety evaluation, qualification, and best practices applied to inhalation drug products

National Research Council Canada - National Science Library

Ball, Douglas J

2012-01-01

...). It discusses best practices for evaluation and management of leachables and extractables throughout the pharma product lifecycle by providing practical knowledge about how and why safety thresholds were developed...

Molten salt reactor as asymptotic safety nuclear system

International Nuclear Information System (INIS)

Novikov, V.M.; Ignatyev, V.V.

1989-01-01

Safety is becoming the main and priority problem of the nuclear power development. An increase of the active safety measures could hardly be considered as the proper way to achieve the asymptotically high level of nuclear safety. It seem that the more realistic way to achieve such a goal is to minimize risk factors and to maximize the use of inherent and passive safety properties. The passive inherent safety features of the liquid fuel molten salt reactor (MSR) technology are making it attractive for future energy generation. The achievement of the asymptotic safety in MSR is being connected with the minimization of such risk factors as a reactivity excess, radioactivity stored, decay heat, non nuclear energy stored in core. In this paper safety peculiarities of the different MSR concepts are discussed

Safety evaluation of small samples for isotope production

International Nuclear Information System (INIS)

Sharma, Archana; Singh, Tej; Varde, P.V.

2015-09-01

Radioactive isotopes are widely used in basic and applied science and engineering, most notably as environmental and industrial tracers, and for medical imaging procedures. Production of radioisotope constitutes important activity of Indian nuclear program. Since its initial criticality DHRUVA reactor has been facilitating the regular supply of most of the radioisotopes required in the country for application in the fields of medicine, industry and agriculture. In-pile irradiation of the samples requires a prior estimation of the sample reactivity load, heating rate, activity developed and shielding thickness required for post irradiation handling. This report is an attempt to highlight the contributions of DHRUVA reactor, as well as to explain in detail the methodologies used in safety evaluation of the in pile irradiation samples. (author)

Safety Culture Survey in Krsko NPP

International Nuclear Information System (INIS)

Strucic, M.; Bilic Zadric, T.

2008-01-01

The high level of nuclear safety, stability and competitiveness of electricity production, and public acceptability are the main objectives of Krsko Nuclear Power Plant. This is achievable only in environment where strong Safety Culture is taking dominant place in the way how employees communicate, perform tasks, share their ideas and attitudes, and demonstrate their concern in all aspects of work and coexistence. To achieve these objectives, behaviour of all employees as well as specific ethical values must become more transparent and that must arise from the heart of organization. Continuous ongoing and periodic self assessments of Safety Culture in Krsko NPP present major tools in implementation process of this approach. Benefits from Periodic interdisciplinary focused self assessment approach, which main intention is finding the strengths and potential areas for improvements, was used second time to assess the area of Safety Culture in Krsko NPP. Main objectives of self assessment, performed in 2006, were to increase the awareness of the present culture, to serve as a basis for improvement and to keep track of the effects of change or improvement over a longer period of time. For the purpose of effective self assessment, extensive questionnaire was used to obtain information that is representative for whole organization. Wide range of questions was chosen to cover five major characteristics of safety culture: Accountability for safety is clear, Safety is integrated into all activities, Safety culture is learning-driven, Leadership for safety is clear and Safety is a clearly recognized value. 484 Krsko NPP employees and 96 contractors were participated in survey. 70-question survey provided information that was quantified and results compared between groups. Anonymity of participant, as well as their willingness to contribute in this assessment implicates the high level of their openness in answering the questions. High number of participant made analysis of

Westinghouse independent safety review of Savannah River production reactors

International Nuclear Information System (INIS)

Leggett, W.D.; McShane, W.J.; Liparulo, N.J.; McAdoo, J.D.; Strawbridge, L.E.; Call, D.W.

1989-01-01

Westinghouse Electric Corporation has performed a safety assessment of the Savannah River production reactors (K, L, and P) as requested by the US Department of Energy. This assessment was performed between November 1, 1988, and April 1, 1989, under the transition contract for the Westinghouse Savannah River Company's preparations to succeed E.I. du Pont de Nemours ampersand Company as the US Department of Energy contractor for the Savannah River Project. The reviewers were drawn from several Westinghouse nuclear energy organizations, embody a combination of commercial and government reactor experience, and have backgrounds covering the range of technologies relevant to assessing nuclear safety. The report presents the rationale from which the overall judgment was drawn and the basis for the committee's opinion on the phased restart strategy proposed by E.I. du Pont de Nemours ampersand Company, Westinghouse, and the US Department of Energy-Savannah River. The committee concluded that it could recommend restart of one reactor at partial power upon completion of a list of recommended upgrades both to systems and their supporting analyses and after demonstration that the organization had assimilated the massive changes it will have undergone. 37 refs., 1 fig., 3 tabs

Westinghouse independent safety review of Savannah River production reactors

Energy Technology Data Exchange (ETDEWEB)

Leggett, W.D.; McShane, W.J. (Westinghouse Hanford Co., Richland, WA (USA)); Liparulo, N.J.; McAdoo, J.D.; Strawbridge, L.E. (Westinghouse Electric Corp., Pittsburgh, PA (USA). Nuclear and Advanced Technology Div.); Toto, G. (Westinghouse Electric Corp., Pittsburgh, PA (USA). Nuclear Services Div.); Fauske, H.K. (Fauske and Associates, Inc., Burr Ridge, IL (USA)); Call, D.W. (Westinghouse Savannah R

1989-04-01

Westinghouse Electric Corporation has performed a safety assessment of the Savannah River production reactors (K,L, and P) as requested by the US Department of Energy. This assessment was performed between November 1, 1988, and April 1, 1989, under the transition contract for the Westinghouse Savannah River Company's preparations to succeed E.I. du Pont de Nemours Company as the US Department of Energy contractor for the Savannah River Project. The reviewers were drawn from several Westinghouse nuclear energy organizations, embody a combination of commercial and government reactor experience, and have backgrounds covering the range of technologies relevant to assessing nuclear safety. The report presents the rationale from which the overall judgment was drawn and the basis for the committee's opinion on the phased restart strategy proposed by E.I. du Pont de Nemours Company, Westinghouse, and the US Department of Energy-Savannah River. The committee concluded that it could recommend restart of one reactor at partial power upon completion of a list of recommended upgrades both to systems and their supporting analyses and after demonstration that the organization had assimilated the massive changes it will have undergone.

Challenges and strategies to facilitate formulation development of pediatric drug products: Safety qualification of excipients.

Science.gov (United States)

Buckley, Lorrene A; Salunke, Smita; Thompson, Karen; Baer, Gerri; Fegley, Darren; Turner, Mark A

2018-02-05

A public workshop entitled "Challenges and strategies to facilitate formulation development of pediatric drug products" focused on current status and gaps as well as recommendations for risk-based strategies to support the development of pediatric age-appropriate drug products. Representatives from industry, academia, and regulatory agencies discussed the issues within plenary, panel, and case-study breakout sessions. By enabling practical and meaningful discussion between scientists representing the diversity of involved disciplines (formulators, nonclinical scientists, clinicians, and regulators) and geographies (eg, US, EU), the Excipients Safety workshop session was successful in providing specific and key recommendations for defining paths forward. Leveraging orthogonal sources of data (eg. food industry, agro science), collaborative data sharing, and increased awareness of the existing sources such as the Safety and Toxicity of Excipients for Paediatrics (STEP) database will be important to address the gap in excipients knowledge needed for risk assessment. The importance of defining risk-based approaches to safety assessments for excipients vital to pediatric formulations was emphasized, as was the need for meaningful stakeholder (eg, patient, caregiver) engagement. Copyright © 2017 Elsevier B.V. All rights reserved.

Achieving year 2000 readiness: basic processes

International Nuclear Information System (INIS)

1999-03-01

This document provides an approach or addressing safety and operability concerns related to Year 2000 (Y2K). Although it was prepared for nuclear power plants the methods described are applicable to other nuclear installations and to other industrial concerns. The basic goal was to provide a brief but comprehensive approach that may be used to discover, understand and correct the Y2K related problems. The document relies on certain basic expectations of the facility that would apply to any programme: ownership, management, knowledgeable participants, thorough application of the approach, documentation of efforts, quality assurance of products and compliance with all regulatory requirements. The IAEA has and will continue to be involved with Member States to assist them in implementing this document and achieving Y2K Readiness

Achieving year 2000 readiness: basic processes

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This document provides an approach or addressing safety and operability concerns related to Year 2000 (Y2K). Although it was prepared for nuclear power plants the methods described are applicable to other nuclear installations and to other industrial concerns. The basic goal was to provide a brief but comprehensive approach that may be used to discover, understand and correct the Y2K related problems. The document relies on certain basic expectations of the facility that would apply to any programme: ownership, management, knowledgeable participants, thorough application of the approach, documentation of efforts, quality assurance of products and compliance with all regulatory requirements. The IAEA has and will continue to be involved with Member States to assist them in implementing this document and achieving Y2K Readiness 12 refs, 3 figs

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

Science.gov (United States)

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

An Overview of Trials´Accreditation and Recognition of Brazilian Tests Used for the Safety Evaluation of Cosmetic Products

Directory of Open Access Journals (Sweden)

Luciana dos Santos Almeida

2016-06-01

Full Text Available For some time, Brazil has been appointed as one of the greatest consumers of cosmetic products in the world. Although cosmetics may seem harmless, destined exclusively to enhance personal appearance or to clean and protect the skin, hair and nails, new studies and events are highlighting the need to evaluate the safety of such products. The present work interrelated the lifecycle of a cosmetic product with the safety trials and tests applicable to some cycle phases. From this information, a survey was made of accredited Conformity Assessment Bodies (CAB and test facilities recognized by the General Coordination for Accreditation (CGCRE which are competent respectively to carry out safety trials and tests of cosmetics. Twenty five competent laboratories were identified to carry out chemical and/or biological trials of cosmetics, according to the legislation ABNT ISO IEC 17025:2005, and 10 test facilities recognized by the Compliance Monitoring Program that can carry out tests of the development of a product for register purposes, aiming at human health and safety. It is interesting to notice that Brazil has accredited laboratories to carry out trials that are critical for the health of the population, such as the levels of heavy metals and the presence of pathogens. On the other hand, CGCRE does not have a program to recognize safety clinical trials. The importance of this kind of study is understood, considering the world history of adverse reactions and the great consumption of cosmetics in the country.

Impact of biomarker development on drug safety assessment

International Nuclear Information System (INIS)

Marrer, Estelle; Dieterle, Frank

2010-01-01

Drug safety has always been a key aspect of drug development. Recently, the Vioxx case and several cases of serious adverse events being linked to high-profile products have increased the importance of drug safety, especially in the eyes of drug development companies and global regulatory agencies. Safety biomarkers are increasingly being seen as helping to provide the clarity, predictability, and certainty needed to gain confidence in decision making: early-stage projects can be stopped quicker, late-stage projects become less risky. Public and private organizations are investing heavily in terms of time, money and manpower on safety biomarker development. An illustrative and 'door opening' safety biomarker success story is the recent recognition of kidney safety biomarkers for pre-clinical and limited translational contexts by FDA and EMEA. This milestone achieved for kidney biomarkers and the 'know how' acquired is being transferred to other organ toxicities, namely liver, heart, vascular system. New technologies and molecular-based approaches, i.e., molecular pathology as a complement to the classical toolbox, allow promising discoveries in the safety biomarker field. This review will focus on the utility and use of safety biomarkers all along drug development, highlighting the present gaps and opportunities identified in organ toxicity monitoring. A last part will be dedicated to safety biomarker development in general, from identification to diagnostic tests, using the kidney safety biomarkers success as an illustrative example.

75 FR 81236 - Consumer Product Safety Act: Notice of Commission Action Lifting Stay of Enforcement of...

Science.gov (United States)

2010-12-27

... action with respect to non-children's products subject to CPSC regulations pertaining to vinyl plastic... pertaining to vinyl plastic film, carpets and rugs, and clothing textiles on January 26, 2011. FOR FURTHER... Reduction, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, Maryland 20814; e-mail...

Hazardous organic compounds in biogas plant end products-Soil burden and risk to food safety

International Nuclear Information System (INIS)

Suominen, K.; Verta, M.; Marttinen, S.

2014-01-01

The end products (digestate, solid fraction of the digestate, liquid fraction of the digestate) of ten biogas production lines in Finland were analyzed for ten hazardous organic compounds or compound groups: polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCB(7)), polyaromatic hydrocarbons (PAH(16)), bis-(2-ethylhexyl) phthalate (DEHP), perfluorinated alkyl compounds (PFCs), linear alkylbenzene sulfonates (LASs), nonylphenols and nonylphenol ethoxylates (NP + NPEOs), polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA). Biogas plant feedstocks were divided into six groups: municipal sewage sludge, municipal biowaste, fat, food industry by-products, animal manure and others (consisting of milling by-products (husk) and raw former foodstuffs of animal origin from the retail trade). There was no clear connection between the origin of the feedstocks of a plant and the concentrations of hazardous organic compounds in the digestate. For PCDD/Fs and for DEHP, the median soil burden of the compound after a single addition of digestate was similar to the annual atmospheric deposition of the compound or compound group in Finland or other Nordic countries. For PFCs, the median soil burden was somewhat lower than the atmospheric deposition in Finland or Sweden. For NP + NPEOs, the soil burden was somewhat higher than the atmospheric deposition in Denmark. The median soil burden of PBDEs was 400 to 1000 times higher than the PBDE air deposition in Finland or in Sweden. With PBDEs, PFCs and HBCD, the impact of the use of end products should be a focus of further research. Highly persistent compounds, such as PBDE- and PFC-compounds may accumulate in agricultural soil after repeated use of organic fertilizers containing these compounds. For other compounds included in this study, agricultural use of biogas plant end products is unlikely to cause risk to food safety in Finland. - Highlights: �

Hazardous organic compounds in biogas plant end products-Soil burden and risk to food safety

Energy Technology Data Exchange (ETDEWEB)

Suominen, K., E-mail: kimmo.suominen@evira.fi [Finnish Food Safety Authority Evira, Risk Assessment Research Unit, Mustialankatu 3, 00790 Helsinki (Finland); Verta, M. [Finnish Environmental Institute (SYKE), Mechelininkatu 34a, P.O. Box 140, 00251 Helsinki (Finland); Marttinen, S. [MTT Agrifood Research Finland, 31600 Jokioinen (Finland)

2014-09-01

The end products (digestate, solid fraction of the digestate, liquid fraction of the digestate) of ten biogas production lines in Finland were analyzed for ten hazardous organic compounds or compound groups: polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCB(7)), polyaromatic hydrocarbons (PAH(16)), bis-(2-ethylhexyl) phthalate (DEHP), perfluorinated alkyl compounds (PFCs), linear alkylbenzene sulfonates (LASs), nonylphenols and nonylphenol ethoxylates (NP + NPEOs), polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA). Biogas plant feedstocks were divided into six groups: municipal sewage sludge, municipal biowaste, fat, food industry by-products, animal manure and others (consisting of milling by-products (husk) and raw former foodstuffs of animal origin from the retail trade). There was no clear connection between the origin of the feedstocks of a plant and the concentrations of hazardous organic compounds in the digestate. For PCDD/Fs and for DEHP, the median soil burden of the compound after a single addition of digestate was similar to the annual atmospheric deposition of the compound or compound group in Finland or other Nordic countries. For PFCs, the median soil burden was somewhat lower than the atmospheric deposition in Finland or Sweden. For NP + NPEOs, the soil burden was somewhat higher than the atmospheric deposition in Denmark. The median soil burden of PBDEs was 400 to 1000 times higher than the PBDE air deposition in Finland or in Sweden. With PBDEs, PFCs and HBCD, the impact of the use of end products should be a focus of further research. Highly persistent compounds, such as PBDE- and PFC-compounds may accumulate in agricultural soil after repeated use of organic fertilizers containing these compounds. For other compounds included in this study, agricultural use of biogas plant end products is unlikely to cause risk to food safety in Finland. - Highlights: �

Safety and interlock system for Tristan

International Nuclear Information System (INIS)

Takeda, S.; Kudo, K.; Katoh, T.; Akiyama, A.

1987-01-01

This report describes alarm and interlock system of TRISTAN, concentrating on personnel safety. The basis of TRISTAN machine-control system (TMS) is an N-to-N computer network and KEK NODAL which offers high software productivity. TMC achieves high flexibility of operation both for normal operation and for the fast commissioning. However, to assure the safety of personnel and the TRISTAN machine operation, the safety system has to continue functioning during TMC failure as well. A distributed safety and interlock system (DSIS) is used for diversification of risks in TRISTAN system. DSIS is functionally subdivided along local system lines and has a hierarchical structure of 12 programmable sequence controllers (PSCs). Optical fiber links connect the PSCs at subsystem level and a PSC at the supervisory level of TRISTAN central control room (TCCR). The subsystem PSCs provide the interlock functions between their local devices. The local PSCs interact with the central system through a limited number of summarized signals. The central PSC provides the interlock functions between the subsystems and interacts with an operator's panel. Personnel safety is based on a system of electrical interlock keys, emergency push-buttons around the tunnel, at the entrance gates or in the control room

National nuclear safety report 2005. Convention on nuclear safety

International Nuclear Information System (INIS)

2006-01-01

This National Nuclear Safety Report was presented at the 3rd. Review meeting. In general the information contained in the report are: Highlights / Themes; Follow-up from 2nd. Review meeting; Challenges, achievements and good practices; Planned measures to improve safety; Updates to National report to 3rd. Review meeting; Questions from peer review of National Report; and Conclusions

Mapping medical marijuana: state laws regulating patients, product safety, supply chains and dispensaries, 2017.

Science.gov (United States)

Klieger, Sarah B; Gutman, Abraham; Allen, Leslie; Pacula, Rosalie Liccardo; Ibrahim, Jennifer K; Burris, Scott

2017-12-01

(1) To describe open source legal data sets, created for research use, that capture the key provisions of US state medical marijuana laws. The data document how state lawmakers have regulated a medicine that remains, under federal law, a Schedule I illegal drug with no legitimate medical use. (2) To demonstrate the variability that exists across states in rules governing patient access, product safety and dispensary practice. Two legal researchers collected and coded state laws governing marijuana patients, product safety and dispensaries in effect on 1 February 2017, creating three empirical legal data sets. We used summary tables to identify the variation in specific statutory provisions specified in each state's medical marijuana law as it existed on 1 February 2017. We compared aspects of these laws to the traditional Federal approach to regulating medicine. Full data sets, codebooks and protocols are available through the Prescription Drug Abuse Policy System (http://www.pdaps.org/; Archived at http://www.webcitation.org/6qv5CZNaZ on 2 June 2017). Twenty-eight states (including the District of Columbia) have authorized medical marijuana. Twenty-seven specify qualifying diseases, which differ across states. All states protect patient privacy; only 14 protect patients against discrimination. Eighteen states have mandatory product safety testing before any sale. While the majority have package/label regulations, states have a wide range of specific requirements. Most regulate dispensaries (25 states), with considerable variation in specific provisions such as permitted product supply sources number of dispensaries per state and restricting proximity to various types of location. The federal ban in the United States on marijuana has resulted in a patchwork of regulatory strategies that are not uniformly consistent with the approach usually taken by the Federal government and whose effectiveness remains unknown. © 2017 Society for the Study of Addiction.

Implementation of the safety culture for HANARO Safety Management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which the management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of the safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of safety management in nuclear activities for a reactor application and utilization has also been emphasized more than 10 years in HANARO which is a 30 MW multi-purpose research reactor and achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation like the seminars and lectures related to safety matters, participation in international workshops, the development of safety culture indicators, the survey on the attitude of safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e-Learning program for safety education. (author)

Achievements and future directions in the reactors physics and nuclear safety research

International Nuclear Information System (INIS)

Dumitrache, Ion

2001-01-01

A historical overlook is presented with respect to inception and development of reactor physics research and on the job training in Romania. First these activities were carried out at the Institute for Atomic Physics and Institute for Power Reactors (IRNE) in Bucharest and afterward at the Institute for Nuclear Technologies, later on transformed in the Institute of Nuclear Research at Pitesti. CYBER Computer installed at Pitesti allowed formation in as early as 1971 reactor specialists who worked out computer programs for neutron physics calculations. These specialists were able to assimilate the characteristic of CANDU 6 type reactor as well as the AECL methodology of simulating processes of CANDU reactor physics. At present four programs are under way. These are: 1. The nuclear reactor physics; 2. The nuclear facility safety; 3. Safety analyses for the transport and radioactive waste disposal; 4. Analyses for radiation shielding and biological protection. There are presented results of the work associated to the CANDU type reactor: 1. Adapting and improving the code system for neutron and thermohydraulic calculation for CANDU type reactor, as supplied by AECL; 2. The IRNE manual for CANDU reactor neutron designing; 3. Final sizing of shim rods of Cernavoda NPP Unit 2; 4. Tests and measurements of reactor physics at the Cernavoda NPP Unit 1 commissioning; 5. Simulation and independent analysis of thermosiphoning carried out at Cernavoda NPP Unit 1 commissioning; 6. Static and dynamical response of the detectors in the CANDU reactor core and their time evolution following the burnup in the neutron flux and their ageing effects; 7. PSA studies at Unit 1; 8. Safety analyses for the radioactive waste disposal at Saligny repository. Also, reported are the results of the work associated to the TRIGA reactor, as follows: 1. Flux measurements and neutron computations necessary in the reactor commissioning; 2. Cleaning up controversial issues relating to neutron flux

Defining safety culture and the nexus between safety goals and safety culture. 4. Enhancing Safety Culture Through the Establishment of Safety Goals

International Nuclear Information System (INIS)

Tateiwa, Kenji; Miyata, Koichi; Yahagi, Kimitoshi

2001-01-01

Safety culture is the perception of each individual and organization of a nuclear power plant that safety is the first priority, and at Tokyo Electric Power Company (TEPCO), we have been practicing it in everyday activities. On the other hand, with the demand for competitiveness of nuclear power becoming even more intense these days, we need to pursue efficient management while maintaining the safety level at the same time. Below, we discuss how to achieve compatibility between safety culture and efficient management as well as enhance safety culture. Discussion at Tepco: safety culture-nurturing activities such as the following are being implemented: 1. informing the employees of the 'Declaration of Safety Promotion' by handing out brochures and posting it on the intranet home page; 2. publishing safety culture reports covering stories on safety culture of other industry sectors, recent movements on safety culture, etc.; 3. conducting periodic questionnaires to employees to grasp how deeply safety culture is being established; 4. carrying out educational programs to learn from past cases inside and outside the nuclear industry; 5. committing to common ownership of information with the public. The current status of safety culture in Japan sometimes seems to be biased to the quest of ultimate safety; rephrasing it, there have been few discussions regarding the sufficiency of the quantitative safety level in conjunction with the safety culture. Safety culture is one of the most crucial foundations guaranteeing the plant's safety, and for example, the plant safety level evaluated by probabilistic safety assessment (PSA) could be said to be valid only on the ground that a sound and sufficient safety culture exists. Although there is no doubt that the safety culture is a fundamental and important attitude of an individual and organization that keeps safety the first priority, the safety culture in itself should not be considered an obstruction to efforts to implement

Food safety and organic meats.

Science.gov (United States)

Van Loo, Ellen J; Alali, Walid; Ricke, Steven C

2012-01-01

The organic meat industry in the United States has grown substantially in the past decade in response to consumer demand for nonconventionally produced products. Consumers are often not aware that the United States Department of Agriculture (USDA) organic standards are based only on the methods used for production and processing of the product and not on the product's safety. Food safety hazards associated with organic meats remain unclear because of the limited research conducted to determine the safety of organic meat from farm-to-fork. The objective of this review is to provide an overview of the published results on the microbiological safety of organic meats. In addition, antimicrobial resistance of microbes in organic food animal production is addressed. Determining the food safety risks associated with organic meat production requires systematic longitudinal studies that quantify the risks of microbial and nonmicrobial hazards from farm-to-fork.

30 Years of NRWG activities towards harmonization of nuclear safety criteria and requirements

International Nuclear Information System (INIS)

2002-11-01

This report describes the work performed and the results achieved by the NRWG since its creation in 1972 to advise the Commission on nuclear safety matters (safety methodologies, criteria, standards, postulated accidents inside the nuclear installations, natural hazards, man-made hazards, training of personnel and use of simulator, ALARA policy to reduce the doses to the personnel and the public, emergency planning, defence in depth and integrity of the successive barriers between the radioactive products and the environment, radiological consequences of postulated accidents, probabilistic safety analysis, severe accidents analysis and management. The report also lists a number of technical subjects where NRWG has played a leading role. (author)

Research on communication system of underground safety management based on leaky feeder cable

Institute of Scientific and Technical Information of China (English)

CHEN Jian-hong; ZHANG Tao; CHENG Yun-cai; ZHANG Han

2007-01-01

According to the current working status of underground safety management and production scheduling, the importance and existed problem of underground mine radio communication were summarized, and the basic principle and classification of leaky feeder cable were introduced and the characteristics of cable were analyzed specifically in depth, and the application model of radio communication system for underground mine safety management was put forward. Meanwhile, the research explanation of the system component, function and evaluation was provided. The discussion result indicates that communication system of underground mine safety management which is integrated two-way relay amplifier and other equipment has many communication functions, and underground mine mobile communication can be achieved well.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose

Made in China: Policy Analysis and Prescriptions to Improve China's Consumer Product Safety Regulatory Regime

National Research Council Canada - National Science Library

McMullin, III, James A

2008-01-01

China's central government's response to the current challenge of consumer product safety in the food and drug arena could be a determining factor in its ability to sustain robust economic growth over the next decade...

ENVIRONMENTAL SAFETY OF LIVESTOCK PRODUCTS IN THE ECONOMIC AND GEOGRAPHIC AREAS OF THE AZERBAIJAN PART OF THE GREATER CAUCASUS

Directory of Open Access Journals (Sweden)

F. M. Jafarova

2016-01-01

Full Text Available Aim. The aim is to study the political, economic and environmental aspects of food security, which is an important component of national security; to study the issues of the use of environmentally friendly agricultural products, as well as the environmental safety of livestock products.Methods. Determination of the dynamics of livestock production on the basis of the comparative statistical analysis, the study of animal breeding territorial organization through a systematic approach.Results. The region has favorable conditions for the production of ecologically clean agricultural products, using environmentally friendly feed. We should develop manufacturing industries to meet international standards and provide the population with healthy food.Conclusion. We revealed the ecological safety of livestock products in the economic and geographic regions of the Azerbaijan part of the Greater Caucasus.

Safety research in the field of energy production. Plan for continued Nordic projects

Energy Technology Data Exchange (ETDEWEB)

Ahlstroem, P E [Statens Vattenfallsverk, Stockholm (Sweden); Berg, J [Institutt for Atomenergi, Kjeller (Norway); Eckered, T [Statens Kaernkraftinspektion, Stockholm (Sweden)

1980-01-01

NGS, an ad hoc group of the Nordic Co-ordination Committee for Atomic Energy, has prepared this survey of proposed cooperative projects as a continuation of previous projects. New areas to be given priority are:- reactor safety, environmental effects in energy production and human reliability. Continued projects are:- quality assurance, radioactive waste and radioecology. (JIW)

21 CFR 740.10 - Labeling of cosmetic products for which adequate substantiation of safety has not been obtained.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Labeling of cosmetic products for which adequate..., DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) COSMETICS COSMETIC PRODUCT WARNING STATEMENTS Warning Statements § 740.10 Labeling of cosmetic products for which adequate substantiation of safety has not been...

Applying Systems Thinking to Law Enforcement Safety: Recommendation for a Comprehensive Safety Management Framework

Science.gov (United States)

2015-12-01

injuries can also lead to other significant health concerns such as depression and absenteeism , which impact organizational productivity and safety...injuries is important: (1) to determine the impact of costs such as lost wages, medical expenses and insurance claims, as well as productivity ... production and operational safety; and a sustaining institutional culture.53 Safety is often not the primary goal of organizations, as other business or

METAHEURISTICS FOR OPTIMIZING SAFETY STOCK IN MULTI STAGE INVENTORY SYSTEM

Directory of Open Access Journals (Sweden)

Gordan Badurina

2013-02-01

Full Text Available Managing the right level of inventory is critical in order to achieve the targeted level of customer service, but it also carries significant cost in supply chain. In majority of cases companies define safety stock on the most downstream level, i.e. the finished product level, using different analytical methods. Safety stock on upstream level, however, usually covers only those problems which companies face on that particular level (uncertainty of delivery, issues in production, etc.. This paper looks into optimizing safety stock in a pharmaceutical supply considering the three stages inventory system. The problem is defined as a single criterion mixed integer programming problem. The objective is to minimize the inventory cost while the service level is predetermined. In order to coordinate inventories at all echelons, the variable representing the so-called service time is introduced. Because of the problem dimensions, metaheuristics based on genetic algorithm and simulated annealing are constructed and compared, using real data from a Croatian pharmaceutical company. The computational results are presented evidencing improvements in minimizing inventory costs.

Framework of nuclear safety and safety assessment

International Nuclear Information System (INIS)

Furuta, Kazuo

2007-01-01

Since enormous energy is released by nuclear chain reaction mainly as a form of radiation, a great potential risk accompanies utilization of nuclear energy. Safety has been continuously a critical issue therefore from the very beginning of its development. Though the framework of nuclear safety that has been established at an early developmental stage of nuclear engineering is still valid, more comprehensive approaches are required having experienced several events such as Three Mile Island, Chernobyl, and JCO. This article gives a brief view of the most basic principles how nuclear safety is achieved, which were introduced and sophisticated in nuclear engineering but applicable also to other engineering domains in general. (author)

Safety warnings and first aid instructions on consumer and pharmaceutical products in Nigeria: has there been an improvement?

Science.gov (United States)

Nonyelum, Stanley Catherine; Nkem, Nwachukwu; Ifeyinwa, Chijoke-Nwauche; Orisakwe, Orish Ebere

2010-10-01

To investigate the adequacy of safety warnings and first aid instructions on the labels of pharmaceutical and consumer products in Nigeria. A market basket method (total collection of all available samples) was used to investigate the adequacy of safety warnings and first aid instructions on the labels of 600 pharmaceutical and consumer products in Nigeria. The results showed that 69.8% of the products had adequate warnings whereas 385 (64.1%) of the products screened had legible product warnings. Only 52 (8.7%) of the total number of products had appropriate first aid instructions while only 25 (4.12%) of the products described symptoms and full treatment of poisoning by the product and 319 (53.2%) products surveyed recommended calling a health professional. A total of 31 (5.2%) products had labels that were considered too technical (non English). Of the 600 products, 386 (64.3%) had dosage instructions that were considered adequate while 538 (89.6%) had adequate storage instructions. About 68% of the products had partially correct warnings while 44 or 7.3% had partially correct first aid instructions. Some products had neither warnings nor first aid instructions. This study suggests a not too impressive improvement in the correctness and appropriateness of label information.

Product-based Safety Certification for Medical Devices Embedded Software.

Science.gov (United States)

Neto, José Augusto; Figueiredo Damásio, Jemerson; Monthaler, Paul; Morais, Misael

2015-01-01

Worldwide medical device embedded software certification practices are currently focused on manufacturing best practices. In Brazil, the national regulatory agency does not hold a local certification process for software-intensive medical devices and admits international certification (e.g. FDA and CE) from local and international industry to operate in the Brazilian health care market. We present here a product-based certification process as a candidate process to support the Brazilian regulatory agency ANVISA in medical device software regulation. Center of Strategic Technology for Healthcare (NUTES) medical device embedded software certification is based on a solid safety quality model and has been tested with reasonable success against the Class I risk device Generic Infusion Pump (GIP).

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe.

Science.gov (United States)

Roth, Eva; Rosenthal, Harald

2006-01-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Käferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union.

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe

International Nuclear Information System (INIS)

Roth, Eva; Rosenthal, Harald

2006-01-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Kaeferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union

Fisheries and aquaculture industries involvement to control product health and quality safety to satisfy consumer-driven objectives on retail markets in Europe

Energy Technology Data Exchange (ETDEWEB)

Roth, Eva [University of South Denmark, Department of Environmental and Business Economics, Niels Bohrs vej 9, DK-6700 Esbjerg (Denmark); Institute for Marine Research, University Kiel, Duesternbrooker Weg 20, 24105 Kiel (Germany); Rosenthal, Harald [University of South Denmark, Department of Environmental and Business Economics, Niels Bohrs vej 9, DK-6700 Esbjerg (Denmark); Institute for Marine Research, University Kiel, Duesternbrooker Weg 20, 24105 Kiel (Germany)

2006-07-01

Over the past years the export of agricultural and fishery products from developing countries has substantially increased to markets within the OECD. Retailers and importers are expanding their international operations to meet consumer demands for year-round delivery of products. Moreover, consumers have become increasingly concerned about the safety of food, including those derived from aquatic resources [FAO/NACA/WHO Joint Study Group, 1999. Report food safety issues associated with products from aquaculture. WHO Technical Report Series No 883: VII, pp. 1-55]. Governments and leading businesses are responding by imposing new safety regulations and standards to the international food system (e.g. HACCP, EUREP-GAP), product liability and labeling [Reilly, A., Howgate, P., Kaeferstein, F., 1997. Safety hazards and the application of HACCP in aquaculture. In: Proceedings of the Second International Conference on Fish Inspection and Quality Control: A Global Focus, Arlington, VA, 19-24 May 1996. Technomic Publishing, Lancaster, PA, pp. 353-373]. Initial concerns for imports of aquacultural products from developing to industrialized countries focussed on bacterial contamination [Buras, N. 1993. Microbial safety of produce from wastewater-fed aquaculture. In: Pullin, R.V.C., Rosenthal, H., MacLean, J.L.(Eds.), Proceedings of ICLARM Conferences, vol. 31, pp. 285-295]. Today, if trade opportunities are to be maintained, these countries must adapt to a full array of regulations and standards. This paper describes four scenarios in aquaculture and fishing product trade between developing countries and countries in the European Union.

Hydrogen Production Using Nuclear Energy

Energy Technology Data Exchange (ETDEWEB)

Verfondern, K. [Research Centre Juelich (Germany)

2013-03-15

world. In recent years, the scope of the IAEA's programme has been widened to include other more promising applications such as nuclear hydrogen production and higher temperature process heat applications. The OECD Nuclear Energy Agency, Euratom and the Generation IV International Forum have also shown interest in the non-electric applications of nuclear power based on future generation advanced and innovative nuclear reactors. This report was developed under an IAEA project with the objective of providing updated, balanced and objective information on the current status of hydrogen production processes using nuclear energy. It documents the state of the art of the development of hydrogen as an energy carrier in many Member States, as well as its corresponding production through the use of nuclear power. The report includes an introduction to the technology of nuclear process heat reactors as a means of producing hydrogen or other upgraded fuels, with a focus on high temperature reactor technology to achieve simultaneous generation of electricity and high temperature process heat and steam. Special emphasis is placed on the safety aspects of nuclear hydrogen production systems.

Steam Pressure-Reducing Station Safety and Energy Efficiency Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark D [ORNL; Christopher, Timothy W [ORNL; Oland, C Barry [ORNL

2011-06-01

The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPI program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL

Can stress in farm animals increase food safety risk?

Science.gov (United States)

Rostagno, Marcos H

2009-09-01

All farm animals will experience some level of stress during their lives. Stress reduces the fitness of an animal, which can be expressed through failure to achieve production performance standards, or through disease and death. Stress in farm animals can also have detrimental effects on the quality of food products. However, although a common assumption of a potential effect of stress on food safety exists, little is actually known about how this interaction may occur. The aim of this review was to examine the current knowledge of the potential impact of stress in farm animals on food safety risk. Colonization of farm animals by enteric pathogens such as Escherichia coli O157:H7, Salmonella, and Campylobacter, and their subsequent dissemination into the human food chain are a major public health and economic concern for the food industries. This review shows that there is increasing evidence to demonstrate that stress can have a significant deleterious effect on food safety through a variety of potential mechanisms. However, as the impact of stress is difficult to precisely determine, it is imperative that the issue receives more research attention in the interests of optimizing animal welfare and minimizing losses in product yield and quality, as well as to food safety risks to consumers. While there is some evidence linking stress with pathogen carriage and shedding in farm animals, the mechanisms underlying this effect have not been fully elucidated. Understanding when pathogen loads on the farm are the highest or when animals are most susceptible to infection will help identifying times when intervention strategies for pathogen control may be most effective, and consequently, increase the safety of food of animal origin.

FOOD QUALITY MANAGEMENT AND SAFETY

OpenAIRE

Rizwana Khatoon; Debkumar Chakraborty; R.C. Chandni; Amar Sankar; A.V. Raghu

2017-01-01

Food safety system mainly focuses on identifying and preventing hazards that may lead product to deteriorate. The main important of manufacturing practice is a system that ensures that products meet food safety, quality and legal requirements. The hazard analysis and critical control point system, applies to food safety management, uses the approach of controlling critical points in food handling to prevent food safety problems. Besides enhancing food safety, other benefits of applying HACCP ...

Thermal Safety Analyses for the Production of Plutonium-238 at the High Flux Isotope Reactor

Energy Technology Data Exchange (ETDEWEB)

Hurt, Christopher J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Freels, James D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hobbs, Randy W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jain, Prashant K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Maldonado, G. Ivan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-08-01

There has been a considerable effort over the previous few years to demonstrate and optimize the production of plutonium-238 (²³⁸Pu) at the High Flux Isotope Reactor (HFIR). This effort has involved resources from multiple divisions and facilities at the Oak Ridge National Laboratory (ORNL) to demonstrate the fabrication, irradiation, and chemical processing of targets containing neptunium-237 (²³⁷Np) dioxide (NpO₂)/aluminum (Al) cermet pellets. A critical preliminary step to irradiation at the HFIR is to demonstrate the safety of the target under irradiation via documented experiment safety analyses. The steady-state thermal safety analyses of the target are simulated in a finite element model with the COMSOL Multiphysics code that determines, among other crucial parameters, the limiting maximum temperature in the target. Safety analysis efforts for this model discussed in the present report include: (1) initial modeling of single and reduced-length pellet capsules in order to generate an experimental knowledge base that incorporate initial non-linear contact heat transfer and fission gas equations, (2) modeling efforts for prototypical designs of partially loaded and fully loaded targets using limited available knowledge of fabrication and irradiation characteristics, and (3) the most recent and comprehensive modeling effort of a fully coupled thermo-mechanical approach over the entire fully loaded target domain incorporating burn-up dependent irradiation behavior and measured target and pellet properties, hereafter referred to as the production model. These models are used to conservatively determine several important steady-state parameters including target stresses and temperatures, the limiting condition of which is the maximum temperature with respect to the melting point. The single pellet model results provide a basis for the safety of the irradiations, followed by parametric analyses in the initial prototypical designs

Characterization of the animal by-product meal industry in Costa Rica: Manufacturing practices through the production chain and food safety.

Science.gov (United States)

Leiva, A; Granados-Chinchilla, F; Redondo-Solano, M; Arrieta-González, M; Pineda-Salazar, E; Molina, A

2018-06-01

Animal by-product rendering establishments are still relevant industries worldwide. Animal by-product meal safety is paramount to protect feed, animals, and the rest of the food chain from unwanted contamination. As microbiological contamination may arise from inadequate processing of slaughterhouse waste and deficiencies in good manufacturing practices within the rendering facilities, we conducted an overall establishment's inspection, including the product in several parts of the process.An evaluation of the Good Manufacturing Practices (GMP) was carried out, which included the location and access (i.e., admission) to the facilities, integrated pest management programs, physical condition of the facilities (e.g., infrastructure), equipments, vehicles and transportation, as well as critical control points (i.e., particle size and temperature set at 50 mm, 133°C at atmospheric pressure for 20 min, respectively) recommended by the OIE and the European Commission. The most sensitive points according to the evaluation are physical structure of the facilities (avg 42.2%), access to the facilities (avg 48.6%), and cleaning procedures (avg 51.4%).Also, indicator microorganisms (Salmonella spp., Clostridium spp., total coliforms, E. coli, E. coli O157:H7) were used to evaluate the safety in different parts of the animal meal production process. There was a prevalence of Salmonella spp. of 12.9, 14.3, and 33.3% in Meat and Bone Meal (MBM), poultry by-products, and fish meal, respectively. However, there were no significant differences (P = 0.73) in the prevalence between the different animal meals, according to the data collected.It was also observed that renderings associated with the poultry industry (i.e., 92.0%) obtained the best ratings overall, which reflects a satisfactory development of this sector and the integration of its production system as a whole.

Construction products performances and basic requirements for fire safety of facades in energy rehabilitation of buildings

Directory of Open Access Journals (Sweden)

Laban Mirjana Đ.

2015-01-01

Full Text Available Construction product means any product or kit which is produced and placed on the market for incorporation in a permanent manner in construction works, or parts thereof, and the performance of which has an effect on the performance of the construction works with respect to the basic requirements for construction works. Safety in case of fire and Energy economy and heat retention represent two among seven basic requirements which building has to meet according to contemporary technical rules on planning and construction. Performances of external walls building materials (particularly reaction to fire could significantly affect to fire spread on the façade and other building parts. Therefore, façade shaping and materialization in building renewal process, has to meet the fire safety requirement, as well as the energy requirement. Brief survey of fire protection regulations development in Serbia is presented in the paper. Preventive measures for fire risk reduction in building façade energy renewal are proposed according to contemporary fire safety requirements.

Biogas production and distribution. Operators' health and safety. Extended abstract

International Nuclear Information System (INIS)

Gardeur-Algros, E.; Chesnot, T.; Charissou, A.M.; Paris, T.; Bronner, C.

2013-06-01

Production and recovery of biogas from different substrates of agricultural, urban and industrial issues are at the heart of sustainable development for the production of renewable energy, reducing greenhouse gases and waste treatment. In 2011, in France, about 200 biogas plants were operational. Moreover, about 300 ISDND (nonhazardous waste storage or landfill sites) also produce biogas, about 90 that of them valorize it. Because of regulatory contexts and favorable measures to bolster the economy, the number of sites is growing and anaerobic pathways are diversifying in terms of substrate / treated waste, anaerobic digestion processes and ways of valorization. So it seems appropriate to focus on the health and safety of workers potentially exposed to various hazards during operations of monitoring, maintenance or malfunction of facilities. First, through a literature search and a query of experts, data such as substrate, digestate and biogas composition, information feedback on reported incidents / accidents or accidents at work and illnesses of operators have been sought. Then, critical points concerning the health and safety of operators in these sectors were identified by implementing some steps of HACCP (Hazard Analysis - Critical Control Points). Five sectors (agricultural methanization in farms and in centralized plants - methanization of urban sewage sludge - methanization of household garbage - industrial methanization in sectors like food industry, stationery and chemistry - biogas production from landfill sites) have been studied and led to dedicated syntheses. They summarize the collected information and present an operating diagram indicating the different stages of biogas production and recovery. On this diagram, critical points are identified, assessed according to their importance and are associated with phases of maintenance operation, or malfunction. The results are intended to educate the actors to potential risks and attention they need to

Exploring the influence of context on food safety management: Case studies of leafy greens production in Europe

NARCIS (Netherlands)

Kirezieva, K.K.; Jacxsens, L.; Hagelaar, J.L.F.; Boekel, van T.; Uyttendaele, M.; Luning, P.A.

2015-01-01

Fresh produce companies operate their food safety management systems (FSMS) in a complex context. On the one hand, during setting and operating their FSMS activities, companies need to consider the riskiness of the ‘FSMS context’ of the company, including the risk of product and production, and the

Culture matters: indigenizing patient safety in Bhutan.

Science.gov (United States)

Pelzang, Rinchen; Johnstone, Megan-Jane; Hutchinson, Alison M

2017-09-01

Studies show that if quality of healthcare in a country is to be achieved, due consideration must be given to the importance of the core cultural values as a critical factor in improving patient safety outcomes. The influence of Bhutan's traditional (core) cultural values on the attitudes and behaviours of healthcare professionals regarding patient care are not known. This study aimed to explore the possible influence of Bhutan's traditional cultural values on staff attitudes towards patient safety and quality care. Undertaken as a qualitative exploratory descriptive inquiry, a purposeful sample of 94 healthcare professionals and managers were recruited from three levels of hospitals, a training institute and the Ministry of Health. Interviews were transcribed verbatim and analysed using thematic analysis strategies. The findings of the study suggest that Bhutanese traditional cultural values have both productive and counterproductive influences on staff attitudes towards healthcare delivery and the processes that need to be in place to ensure patient safety. Productive influences encompassed: karmic incentives to avoid preventable harm and promote safe patient care; and the prospective adoption of the 'four harmonious friends' as a culturally meaningful frame for improving understanding of the role and importance of teamwork in enhancing patient safety. Counterproductive influences included: the adoption of hierarchical and authoritative styles of management; unilateral decision-making; the legitimization of karmic beliefs; differential treatment of patients; and preferences for traditional healing practices and rituals. Although problematic in some areas, Bhutan's traditional cultural values could be used positively to inform and frame an effective model for improving patient safety in Bhutan's hospitals. Such a model must entail the institution of an 'indigenized' patient safety program, with patient safety research and reporting systems framed around local

A fuzzy-based model to implement the global safety buildings index assessment for agri-food buildings

Directory of Open Access Journals (Sweden)

Francesco Barreca

2014-06-01

Full Text Available The latest EU policies focus on the issue of food safety with a view to ensuring adequate and standard quality levels for the food produced and/or consumed within the EC. To that purpose, the environment where agricultural products are manufactured and processed plays a crucial role in achieving food hygiene. As a consequence, it is of the outmost importance to adopt proper building solutions which meet health and hygiene requirements as well as to use suitable tools to measure the levels achieved. Similarly, it is necessary to verify and evaluate the level of workers’ safety and welfare in their working environment. Workers’ safety has not only an ethical and social value but also an economic implication, since possible accidents or environmental stressors are the major causes of the lower efficiency and productivity of workers. Therefore, it is fundamental to design suitable models of analysis that allow assessing buildings as a whole, taking into account both health and hygiene safety as well as workers’ safety and welfare. Hence, this paper proposes an assessment model that, based on an established study protocol and on the application of a fuzzy logic procedure, allows assessing the global safety level of an agri-food building by means of a global safety buildings index. The model here presented is original since it uses fuzzy logic to evaluate the performances of both the technical and environmental systems of an agri-food building in terms of health and hygiene safety of the manufacturing process as well as of workers’ health and safety. The result of the assessment is expressed through a triangular fuzzy membership function which allows carrying out comparative analyses of different buildings. A specific procedure was developed to apply the model to a case study which tested its operational simplicity and the validity of its results. The proposed model allows obtaining a synthetic and global value of the building performance of

System design for shaft safety and productivity

Energy Technology Data Exchange (ETDEWEB)

Owen, D.; Parsons, R.; Ward, R.

1988-03-01

The aim of this paper is to describe the process of designing a system to improve safety and productivity in shafts. The objectives and constraints for the design were set out in official reports following a shaft accident at Markham Colliery in 1973. The problems to be solved were: to enable the shaftsmen to transfer the existing statutory code of signals efficiently from, or on top of, a conveyance anywhere in the shaft to the winding engineman and banksman at the surface: to detect the existence of slack rope or to detect that conditions have arisen that slack rope could be created and transmit this information to where action can be taken; and to allow conversations between winding engineman, banksman and shaftsman making allowances for the high level of acoustic noise in shafts. The approach adopted for slack rope monitoring was to monitor the tension in the cage suspension gear, thus measuring a first order effect. The three problems have a common element: information must be transferred through the shaft. This particular problem was solved with guided radio, using the winding rope as the transmission medium. The radio signal is coupled into the winding rope by means of fixed toroid encircling it at the cage and fixed magnetic antennas at the surface. The design of a digital transmission system for signalling and tension data is discussed. The 'top down' modular approach used in the design enabled full advantage to be taken of the opportunities for building a more reliable, safer and flexible system presented by technologies new to the shaft environment. The resultant system, the Safecom Shaft Signalling Communication and Winder Safety Monitoring System type S100, is in regular use at over 20 installations. 3 refs., 4 figs., 1 tab.

A retrofit strategy to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes

DEFF Research Database (Denmark)

Singh, Ravendra; Rozada-Sanchez, Raquel; Wrate, Tim

2011-01-01

n the work reported here, a substrates adoption methodology for a series of similar substrates has been developed as part of a retrofit strategy. The objective is to achieve “fast, flexible and future” pharmaceutical production processes by adapting a generic modular process-plant template...

Performance standards of road safety management

Directory of Open Access Journals (Sweden)

Čabarkapa Milenko R.

2016-01-01

Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

Effects of an onion by-product on bioactivity and safety markers in healthy rats

DEFF Research Database (Denmark)

Roldan-Marin, Eduvigis; Krath, Britta; Poulsen, Morten

2009-01-01

Onions are excellent sources of bioactive compounds including fructo-oligosaccharides (FOS) and polyphenols. An onion by-product was characterised in order to be developed as a potentially bioactive food ingredient. Our main aim was to investigate whether the potential health and safety effects...... of this onion by-product were shared by either of two derived fractions, an extract containing the onion FOS and polyphenols and a residue fraction containing mainly cell wall materials. We report here on the effects of feeding these products on markers of potential toxicity, protective enzymes and gut...... environment in healthy rats. Rats were fed during 4 weeks with a diet containing the products or a control feed balanced in carbohydrate. The onion by-product and the extract caused anaemia as expected in rodents for Allium products. No other toxicity was observed, including genotoxicity. Glutathione...

[HERA-QUEST: HTA evaluation of generic pharmaceutical products to improve quality, economic efficiency, patient safety and transparency in drug product changes in hospitals].

Science.gov (United States)

Gyalrong-Steur, Miriam; Kellermann, Anita; Bernard, Rudolf; Berndt, Georg; Bindemann, Meike; Nusser-Rothermundt, Elfriede; Amann, Steffen; Brakebusch, Myga; Brüggmann, Jörg; Tydecks, Eva; Müller, Markus; Dörje, Frank; Kochs, Eberhard; Riedel, Rainer

2017-04-01

In view of the rising cost pressure and an increasing number of drug shortages, switches between generic drug preparations have become a daily routine in hospitals. To ensure consistently high treatment quality and best possible patient safety, the equivalence of the new and the previous drug preparation must be ensured before any change in the purchase of pharmaceutical products takes place. So far, no easily usable, transparent and standardized instrument for this kind of comparison between generic drug products has been available. A group of pharmaceutical experts has developed the drug HTA (health technology assessment) model "HERA" (HTA Evaluation of geneRic phArmaceutical products) through a multi-step process. The instrument is designed to perform both a qualitative and economic comparison of equivalent drug preparations ("aut idem" substitution) before switching products. The economic evaluation does not only consider unit prices and consumption quantity, but also the processing costs associated with a product change process. The qualitative comparison is based on the evaluation of 34 quality criteria belonging to six evaluation fields (e.g., approval status, practical handling, packaging design). The objective evaluation of the quality criteria is complemented by an assessment of special features of the individual hospital for complex drug switches, including the feedback of the physicians utilizing the drug preparation. Thus potentially problematic switches of pharmaceutical products can be avoided at the best possible rate, contributing to the improvement of patient safety. The novel drug HTA model HERA is a tool used in clinical practice that can add to an increase in quality, therapeutic safety and transparency of drug use while simultaneously contributing to the economic optimization of drug procurement in hospitals. Combining these two is essential for hospitals facing the tension between rising cost pressure and at the same time increasing demands

Representation a Framwork for Contractors Selection Via of Health, Safety and Environment

Directory of Open Access Journals (Sweden)

Shahram Mahmoudi

2016-12-01

Full Text Available Introduction: Quality and efficiency of health, safety, and environment (HSE management systems play a vital role in achieving their goals. Considering outputs and objective achievement make continuous improvement of services and products, internal and external customer satisfaction, adopting a systematic way for performing various tasks, system performance and analysis very important. The present study was conducted to construct a proper framework for assessing MAPNA group contractors in terms of their health, safety, and environment performance.  . Method: In the first step of the study, all documents and literature associated with performance assessment were reviewed. In the second step, using a focus group approach, a basic model for assessing HSE management system was designed. Lastly, the framework was tested and credited on three major contractors of MAPNA group. Results: The proposed framework was composed of five criteria. The main criteria was the pattern of HSE process implementation which had seven sub-criteria and 120 guiding hints. Moreover, the five criteria were able to assess the organizational capabilities in terms of health, safety, and environment management.. Conclusion: The proposed framework make contractors able to promote their HSE performances by identifying organizational strong and weak points, prioritizing improvement projects, and also monitoring the pace of improvement in achieving organizational excellence..

Increasing the quality and safety of meat products through high technology methods during their storage

International Nuclear Information System (INIS)

Miteva, D.; Nacheva, I.; Georgieva, L.

2008-01-01

The aim of this study was to increase the quality and safety of different meat products by applying two high technology methods – lyophilization and gamma-irradiation. Object of study were chicken, pork and beef meat products. The organoleptic, physicochemical and microbiological properties after lyophilization, irradiation with gamma-rays and during the preservation of the samples were studied. The results indicated that the application of the two original technologies for preservation could ensure qualitative and long-lasting preservation of meat products with excellently preserved taste and organoleptic properties

The safety of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

Do nuclear power plants present an unjustifiable risk Can there be confidence in their safety The Uranium Institute invited a group of senior safety experts from eight different Western countries operating different types of reactors to provide an authoritative explanation for non-specialists of the basic principles of reactor safety, their application and their implications. The report presents the group's opinion on the level of safety achieved in the Western nuclear power plants with which the authors are directly familiar. Although many of the points made may well also be true for non-Western reactors, the report does not cover them except where specifically stated. It does describe and discuss the causes of the Chernobyl disaster. It does not compare nuclear power with other fuels, nor does it deal with its benefits, since however great the benefits from the peaceful use of nuclear power, and its own advantages over other fuels, they could not compensate for lack of safety. The conclusion reached is that the risk associated with electricity production at nuclear power plants can be kept very low. Proper use of the extensive knowledge available today can guarantee operation of nuclear power plants at very high safety levels, carrying very low risks, both to health and of contamination of the environment: risks that are continually lowered by upgrading existing plants and their operation, and by the design of future power plants. (author).

Preclinical safety and efficacy of a new recombinant FIX drug product for treatment of hemophilia B.

Science.gov (United States)

Dietrich, Barbara; Schiviz, Alexandra; Hoellriegl, Werner; Horling, Frank; Benamara, Karima; Rottensteiner, Hanspeter; Turecek, Peter L; Schwarz, Hans Peter; Scheiflinger, Friedrich; Muchitsch, Eva-Maria

2013-11-01

Baxter has developed a new recombinant factor IX (rFIX) drug product (BAX326) for treating patients with hemophilia B, or congenital FIX deficiency. An extensive preclinical program evaluated the pharmacokinetics, efficacy, and safety of BAX326 in different species. The efficacy of BAX326 was tested in three mouse models of primary pharmacodynamics: tail-tip bleeding, carotid occlusion, and thrombelastography. The pharmacokinetics was evaluated after a single intravenous bolus injection in mice, rats, and macaques. Toxicity was assessed in rats and macaques, safety pharmacology in rabbits and macaques, and immunogenicity in mice. BAX326 was shown to be efficacious in all three primary pharmacodynamic studies (P ≤ 0.0076). Hemostatic efficacy was dose related and similar for the three lots tested. Pharmacokinetic results showed that rFIX activity and rFIX antigen concentrations declined in a bi-phasic manner, similar to a previously licensed rFIX product. BAX326 was well tolerated in rabbits and macaques at all dose levels; no thrombogenic events and no adverse clinical, respiratory, or cardiovascular effects occurred. BAX326 was also shown to have a similar immunogenicity profile to the comparator rFIX product in mice. These results demonstrate that BAX326 has a favorable preclinical safety and efficacy profile, predictive of a comparable effect to that of the previously licensed rFIX in humans.

FFTF [Fast Flux Test Facility] performance measurements for safety, productivity and control

International Nuclear Information System (INIS)

Newland, D.J.; Praetorius, P.R.; Tomaszewski, T.A.

1987-05-01

A useful set of performance measurements for Safety, Productivity and Control has evolved at the Fast Flux Test Facility (FFTF). In response to declining budgets and the resulting need to safely manage a manpower rampdown, an ''Early Warning System'' was developed in 1984. Its purpose was to monitor the effects of the staffing rampdown such that appropriate remedial action could be taken to correct adverse trends before a significant problem occurred. 1 tab

Reactor Safety Analysis

International Nuclear Information System (INIS)

Arien, B.

2000-01-01

The objective of SCK-CEN's programme on reactor safety is to develop expertise in probabilistic and deterministic reactor safety analysis. The research programme consists of two main activities, in particular the development of software for reliability analysis of large systems and participation in the international PHEBUS-FP programme for severe accidents. Main achievements in 1999 are reported

Risk, fear and public safety

International Nuclear Information System (INIS)

Siddall, E.

1981-04-01

Part 1 of the paper advocates a rational approach to public safety based on unbiassed quantitative assessment of overall risks and benefits of any technological activity. It shows that improved safety should be attainable at less cost than is the case at present. Part 2 offers an explanation of why so little has been achieved in this direction and outlines the major errors in present practices. Part 3 suggests what might realistically be done towards the achievement of some of the possible benefits. Factors which are important in the study of safety and evidence supporting the arguments are discussed in six appendices. It is urged that the scientific and technological community should improve its understanding of safety as a specialization and should endeavour to lead rather than follow in our present political system

INPO Perspectives and Activities to Enhance Supplier Human Performance and Safety Culture

International Nuclear Information System (INIS)

Duncan, R. J.

2016-01-01

Within their own organizations, utilities have made significant improvements in human performance and safety culture, supported by a strong community of practice through INPO and WANO. In recent years, utilities have been making increasing use of suppliers for design, construction, inspection and maintenance services in support of their NPPs. Many of these suppliers do not have the benefit of being members of a community of practice when it comes to human performance and safety culture. To help the supplier community make improvements similar to what the utilities have achieved, INPO has recently expanded its Supplier Participant program to address the issue of human performance and safety culture in the supplier community. The intent of this paper will be to share the INPO’s perspectives and activities in helping suppliers of services and products to NPPs enhance their human performance and safety culture. (author)

Safety aspects of electric energy production and supplies in conditions of the Slovenske elektrarne, a.s

International Nuclear Information System (INIS)

Sip, M.; Danilak, M. et al.

2005-01-01

In this presentation author deals with safety aspects of electric energy production and supplies in conditions of the Slovenske elektrarne, a.s. Some terrorist attack and accidents are presented. Four video-sequences are included

Critical review of safety performance metrics

NARCIS (Netherlands)

Karanikas, Nektarios

2016-01-01

Various tools for safety performance measurement have been introduced in order to fulfil the need for safety monitoring in organisations, which is tightly related to their overall performance and achievement of their business goals. Such tools include accident rates, benchmarking, safety culture and

Safety management and control policy. A study of the safety regulation of offshore oil activity by the Norwegian Petroleum Directorate. Sikkerhetsstyring og reguleringsteknikk. Oljedirektoratets regulering av sikkerheten ved produksjon av petroleum

Energy Technology Data Exchange (ETDEWEB)

Graver, H P

1983-01-01

The Norwegian Petroleum Directorate (NPD) is the main administrative body with responsibility to regulate and control the safety aspects of drilling for and production of petroleum on the Norwegian Continental Shelf. Its responsibility does not, however, include the aspects of maritime safety, which are regulated by the Norwegian Maritime Directorate. This study is limited to the regulation of safety on fixed installations for production of petroleum. The object has been to describe the methods applied by the NPD to achieve better safety, and to give answers to why these specific methods of approach have developed as they have. A conclusion that may be drawn from this study is that there exists a relationship of close cooperation between the NPD and the oil industry represented by the operating companies. Only this can explain the differences we find in the NPD approach as compared to the approach of other parts of public administration. Such a relationship probably leads to better safety within the scope of technical rationality than would have a more hostile relationship between the Directorate and the industry. This has its price, however. Aspects of the safety question not included within the limits of a purely technical approach are not as easily taken into account. Partly due to this fact, other parties with interests in safety are not represented.

Management of safety culture

International Nuclear Information System (INIS)

Kavsek, D.

2004-01-01

The strengthening of safety culture in an organization has become an increasingly important issue for nuclear industry. A high level of safety performance is essential for business success in intensely competitive global environment. This presentation offers a discussion of some principles and activities used in enhancing safety performance and appropriate safety behaviour at the Krsko NPP. Over the years a number of events have occurred in nuclear industry that have involved problems in human performance. A review of these and other significant events has identified recurring weaknesses in plant safety culture and policy. Focusing attention on the strengthening of relevant processes can help plants avoid similar undesirable events. The policy of the Krsko NPP is that all employees concerned shall constantly be alert to opportunities to reduce risks to the lowest practicable level and to achieve excellence in plant safety. The most important objective is to protect individuals, society and the environment by establishing and maintaining an effective defense against radiological hazard in the nuclear power plant. It is achieved through the use of reliable structures, components, systems, and procedures, as well as plant personnel committed to a strong safety culture. The elements of safety culture include both organizational and individual aspects. Elements commonly included at the organizational level are senior management commitment to safety, organizational effectiveness, effective communication, organizational learning, and a culture that encourages identification and resolution of safety issues. Elements identified at the individual level include personal accountability, a questioning attitude, communication, procedural adherence, etc.(author)

The role of risk assessment and safety analysis in integrated safety assessments

International Nuclear Information System (INIS)

Niall, R.; Hunt, M.; Wierman, T.E.

1990-01-01

To ensure that the design and operation of both nuclear and non- nuclear hazardous facilities is acceptable, and meets all societal safety expectations, a rigorous deterministic and probabilistic assessment is necessary. An approach is introduced, founded on the concept of an ''Integrated Safety Assessment.'' It merges the commonly performed safety and risk analyses and uses them in concert to provide decision makers with the necessary depth of understanding to achieve ''adequacy.'' 3 refs., 1 fig

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

Science.gov (United States)

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland

Science.gov (United States)

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain. PMID:27341034

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

Directory of Open Access Journals (Sweden)

Patrick Baron

Full Text Available The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1 characteristics of Maryland direct-market poultry production and processing; 2 microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3 motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Application of biotechnology to improve livestock products

Directory of Open Access Journals (Sweden)

Swati Gupta

Full Text Available Biotechnological achievements of recent years have emerged as powerful tool to improve quality attributes of livestock products including milk and meat products. Biotechnological approaches can be employed for improving productivity, economy, physicochemical and nutritional attributes of a wide range of livestock products. The target areas of biotechnological research in the field of livestock products can be envisaged as production of high yielding food animal, improvement in quality of their products, enhanced production of natural food grade preservatives, efficient byproduct utilization and so forth. Many of the biotechnological techniques can be explored in the area of quality assurance programmes, which would be of great help to produce livestock products of assured quality and public health safety. [Vet World 2012; 5(10.000: 634-638

IAEA activity related to safety of nuclear desalination

International Nuclear Information System (INIS)

Gasparini, M.

2000-01-01

The nuclear plants for desalination to be built in the future will have to meet the standards of safety required for the best nuclear power plants currently in operation or being designed. The current safety approach, based on the achievement of the fundamental safety functions and defence in depth strategy, has been shown to be a sound foundation for the safety and protection of public health, and gives the plant the capability of dealing with a large variety of sequences, even beyond the design basis. The Department of Nuclear Safety of the IAEA is involved in many activities, the most important of which are to establish safety standards, and to provide various safety services and technical knowledge in many Technical Co-operation assistance projects. The department is also involved in other safety areas, notably in the field of future reactors. The IAEA is carrying out a project on the safety of new generation reactors, including those used for desalination, with the objective of fostering an exchange of information on safety approaches, promoting harmonization among Member States and contributing towards the development and revision of safety standards and guidelines for nuclear power plant design. The safety, regulatory and environmental concerns in nuclear powered desalination are those related directly to nuclear power plants, with due consideration given to the coupling process. The protection of product water against radioactive contamination must be ensured. An effective infrastructure, including appropriate training, a legal framework and regulatory regime, is a prerequisite to considering use of nuclear power for desalination plants, also in those countries with limited industrial infrastructures and little experience in nuclear technology or safety. (author)

Safety of High Speed Ground Transportation Systems : Analytical Methodology for Safety Validation of Computer Controlled Subsystems : Volume 2. Development of a Safety Validation Methodology

Science.gov (United States)

1995-01-01

This report describes the development of a methodology designed to assure that a sufficiently high level of safety is achieved and maintained in computer-based systems which perform safety cortical functions in high-speed rail or magnetic levitation ...

Safety first!

CERN Multimedia

2016-01-01

Among the many duties I assumed at the beginning of the year was the ultimate responsibility for Safety at CERN: the responsibility for the physical safety of the personnel, the responsibility for the safe operation of the facilities, and the responsibility to ensure that CERN acts in accordance with the highest standards of radiation and environmental protection.   The Safety Policy document drawn up in September 2014 is an excellent basis for the implementation of Safety in all areas of CERN’s work. I am happy to commit during my mandate to help meet its objectives, not least by ensuring the Organization makes available the necessary means to achieve its Safety objectives. One of the main objectives of the HSE (Occupational Health and Safety and Environmental Protection) unit in the coming months is to enhance the measures to minimise CERN’s impact on the environment. I believe CERN should become a role model for an environmentally-aware scientific research laboratory. Risk ...

How Feelings of Safety at School Affect Educational Outcomes

OpenAIRE

Johanna Lacoe

2013-01-01

Persistent racial and ethnic gaps in educational achievement have focused policy attention on school climate and safety as important elements of educational performance. In a special issue of Educational Researcher focused on safety and order in schools, Cornell and Mayer (2010) argue that school safety and school order are fundamental to studies of the achievement gap, teacher attrition, and student engagement. This paper represents the first large-scale analysis of how feelings of safety at...

Safety applications of computer based systems for the process industry

International Nuclear Information System (INIS)

Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

1997-11-01

Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

[Study on the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group].

Science.gov (United States)

Yang, Xin-Wei; Wang, Zhi-Ming; Jin, Tai-Yi; Lan, Ya-Jia

2006-09-01

A study of the occupational stress norm and it's application for the marketing group, public service/safety group and production laborer group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets (36 marketing group, 331 public service/safety group, 903 production laborer group). Descriptive statistics for OSI-R scale scores for the marketing group, public service/safety group and production laborer group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for marketing group public service/safety group and production laborer group were established. OSI-R profile from for marketing group, public service/safety group and production laborer group were established. For the ORQ and PSQ scales, scores at or above 70 indicate a strong levels of maladaptive stress and strain. Score in the range of 60 to 69 suggest middle levels of maladaptive stress and strain. Score in the range of 40 to 59 indicate normal levels of stress and strain. Score below 40 indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30 indicate a significant lack of coping resources. Score in the range of 30 to 39 suggest middle deficits in coping resources. Score in the range of 40 to 59 indicate average coping resources. Scores at or above 60 indicate a strong levels of coping resources. The authors combined subjective and objective environment match model of occupational stress. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

THE INFLUENCE OF MEDIA EXPOSURE, SAFETY AND HEALTH CONCERNS, AND SELF-EFFICACY ON ENVIRONMENTAL ATTITUDES TOWARDS ELECTRONIC GREEN PRODUCTS

Directory of Open Access Journals (Sweden)

Iman Khalid A. Qader

2011-07-01

Full Text Available As the high-tech industry evolves at a rapid pace, vast amounts of hazardous materials are used in fuelling its global expansion. These rapid changes in production processes are significantly depleting natural resources. With the surge of popular interest and awareness pertaining to environmental issues, organisations may be in peril if consumers' attitudes towards their products are ignored. This study intends to understand consumers' environmental attitudes towards electronic green products and to identify the effect of three factors, namely, media exposure, safety and health concerns, and self- efficacy, on this attitude. Data were collected via a self-administered questionnaire among 170 respondents in a public university. The results of the study indicated that safety and health concerns as well as self-efficacy had significant positive impacts on consumers' environmental attitudes. Surprisingly, however, media exposure did not exhibit any significant influence on consumers' environmental attitude. It is recommended that campaign and awareness projects focus on safety and health issues. Additionally, media should play a more active role in increasing environmental awareness among consumers.

Essential Aspects in Assessing the Safety Impact of Interactions between a Drug Product and Its Associated Manufacturing System.

Science.gov (United States)

Jenke, Dennis

2012-01-01

An emerging trend in the biotechnology industry is the utilization of plastic components in manufacturing systems for the production of an active pharmaceutical ingredient (API) or a finished drug product (FDP). If the API, the FDP, or any solution used to generate them (for example, process streams such as media, buffers, and the like) come in contact with a plastic at any time during the manufacturing process, there is the potential that substances leached from the plastic may accumulate in the API or FDP, affecting safety and/or efficacy. In this article the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the article outlines the safety assessment process for manufacturing systems, specifically addressing the topics of risk management and the role of compendial testing. Finally, the proper use of vendor-supplied extractables information is considered. Manufacturing suites used to produce biopharmaceuticals can include components that are made out of plastics. Thus it is possible that substances could leach out of the plastics and into manufacturing solutions, and it is further possible that such leachables could accumulate in the pharmaceutical product. In this article, the author develops a terminology that addresses process streams associated with the manufacturing process. Additionally, the author proposes a process by which the impact on product safety of such leached substances can be assessed.

Safety standards and safety record of nuclear power plants

International Nuclear Information System (INIS)

Davis, A.B.

1984-01-01

This paper focuses on the use of standards and the measurement and enforcement of these standards to achieve safe operation of nuclear power plants. Since a discussion of the safety standards that the Nuclear Regulatory Commission (NRC) uses to regulate the nuclear power industry can be a rather tedious subject, this discussion will provide you with not only a description of what safety standards are, but some examples of their application, and various indicators that provide an overall perspective on safety. These remarks are confined to the safety standards adopted by the NRC. There are other agencies such as the Environmental Protection Agency, the Occupational Safety and Health Administration, and the state regulatory agencies which impact on a nuclear power plant. The NRC has regulatory authority for the commercial use of the nuclear materials and facilities which are defined in the Atomic Energy Act of 1954 to assure that the public health and safety and national security are protected

RESEARCHES CONCERNING THE ECONOMIC EFFICIENCY ACHIEVED SUCCESSIVE TO THE APPLICATION OF BIOLOGICALLY-ACTIVE PRODUCTS IN SMOOTH BROME CROP

Directory of Open Access Journals (Sweden)

ELENA PEł

2008-05-01

Full Text Available Within any branch of material production, the supervision of the economic effects caused by the applied technologies is an essential requirement. Not only related to the productive activity, but also related to scientific research, designing and other fields of activity, the final goal is represented by the achievement of immediate or far off economic effects. The introduction and generalization into production of the newest technologies of forage production must rely upon calculations of economic efficiency, too. The objective of these calculations is to offer to any producer the possibility to choose among the optimal technologic variants, with great productions per surface unit, of high quality and low costs. The calculations of economic efficiency were carried out during the three years of experimentation. The economic efficiency obtained after the application of biostimulants in smooth brome during the first year of production is expressed through the achievement of a profit per surface unit of 75.85 – 127.00 €/ha. Successive to the calculations of economic efficiency, during the second year of production, the profit per surface unit recorded values between 79.10 – 153.10 €/ha depending upon the applied biostimulant, and during the third year of production the profit obtained per surface unit was 211.05 – 270.70 €/ha.

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-01-01

In developing and establishing standards of safety for protecting people and the environment from harmful effects of ionizing radiation and for the safety of facilities and activities that give rise to radiation risks, clear communication on scientific and technical concepts is essential. The principles, requirements and recommendations that are established and explained in the IAEA's safety standards and elaborated upon in other publications must be clearly expressed. To this end, this Safety Glossary defines and explains technical terms used in IAEA safety standards and other safety related publications, and provides information on their usage. The primary purpose of the Safety Glossary is to harmonize terminology and usage in the IAEA safety standards for protecting people and the environment from harmful effects of ionizing radiation, and in their application. Once definitions of terms have been established, they are, in general, intended to be observed in safety standards and other safety related publications and in the work of the IAEA Department of Nuclear Safety and Security generally. The achievement of consistently high quality in its publications contributes to the authority and credibility of the IAEA, and thus to its influence and effectiveness. High quality in publications and documents is achieved not only by review to ensure that the relevant requirements are met, but also by managing their preparation so as to achieve high quality in their drafting. The Safety Glossary provides guidance primarily for the drafters and reviewers of safety standards, including IAEA technical officers and consultants and bodies for the endorsement of safety standards. The Safety Glossary is also a source of information for users of IAEA safety standards and other safety and security related IAEA publications and for other IAEA staff - notably writers, editors, translators, revisers and interpreters. Users of the Safety Glossary, in particular drafters of national

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-06-01

In developing and establishing standards of safety for protecting people and the environment from harmful effects of ionizing radiation and for the safety of facilities and activities that give rise to radiation risks, clear communication on scientific and technical concepts is essential. The principles, requirements and recommendations that are established and explained in the IAEA's safety standards and elaborated upon in other publications must be clearly expressed. To this end, this Safety Glossary defines and explains technical terms used in IAEA safety standards and other safety related publications, and provides information on their usage. The primary purpose of the Safety Glossary is to harmonize terminology and usage in the IAEA safety standards for protecting people and the environment from harmful effects of ionizing radiation, and in their application. Once definitions of terms have been established, they are, in general, intended to be observed in safety standards and other safety related publications and in the work of the IAEA Department of Nuclear Safety and Security generally. The achievement of consistently high quality in its publications contributes to the authority and credibility of the IAEA, and thus to its influence and effectiveness. High quality in publications and documents is achieved not only by review to ensure that the relevant requirements are met, but also by managing their preparation so as to achieve high quality in their drafting. The Safety Glossary provides guidance primarily for the drafters and reviewers of safety standards, including IAEA technical officers and consultants and bodies for the endorsement of safety standards. The Safety Glossary is also a source of information for users of IAEA safety standards and other safety and security related IAEA publications and for other IAEA staff - notably writers, editors, translators, revisers and interpreters. Users of the Safety Glossary, in particular drafters of national

IAEA safety glossary. Terminology used in nuclear safety and radiation protection. 2007 ed

International Nuclear Information System (INIS)

2007-01-01

In developing and establishing standards of safety for protecting people and the environment from harmful effects of ionizing radiation and for the safety of facilities and activities that give rise to radiation risks, clear communication on scientific and technical concepts is essential. The principles, requirements and recommendations that are established and explained in the IAA's safety standards and elaborated upon in other publications must be clearly expressed. To this end, this Safety Glossary defines and explains technical terms used in IAEA safety standards and other safety related publications, and provides information on their usage. The primary purpose of the Safety Glossary is to harmonize terminology and usage in the IAEA safety standards for protecting people and the environment from harmful effects of ionizing radiation, and in their application. Once definitions of terms have been established, they are, in general, intended to be observed in safety standards and other safety related publications and in the work of the IAEA Department of Nuclear Safety and Security generally. The achievement of consistently high quality in its publications contributes to the authority and credibility of the IAEA, and thus to its influence and effectiveness. High quality in publications and documents is achieved not only by review to ensure that the relevant requirements are met, but also by managing their preparation so as to achieve high quality in their drafting. The Safety Glossary provides guidance primarily for the drafters and reviewers of safety standards, including IAEA technical officers and consultants and bodies for the endorsement of safety standards. The Safety Glossary is also a source of information for users of IAEA safety standards and other safety and security related IAEA publications and for other IAEA staff - notably writers, editors, translators, revisers and interpreters. Users of the Safety Glossary, in particular drafters of national

Developing an integrated dam safety program

International Nuclear Information System (INIS)

Nielsen, N. M.; Lampa, J.

1996-01-01

An effort has been made to demonstrate that dam safety is an integral part of asset management which, when properly done, ensures that all objectives relating to safety and compliance, profitability, stakeholders' expectations and customer satisfaction, are achieved. The means to achieving this integration of the dam safety program and the level of effort required for each core function have been identified using the risk management approach to pinpoint vulnerabilities, and subsequently to focus priorities. The process is considered appropriate for any combination of numbers, sizes and uses of dams, and is designed to prevent exposure to unacceptable risks. 5 refs., 1 tab

A Public-Private Consortium Advances Cardiac Safety Evaluation: Achievements of the HESI Cardiac Safety Technical Committee

Science.gov (United States)

The evaluation of cardiovascular side-effects is a critical element in the development of all new drugs and chemicals. Cardiac safety issues have been and continue to be a major cause of attrition and withdrawal due to Adverse Drug Reactions (ADRs) in pharmaceutical drug developm...

United States import safety, environmental health, and food safety regulation in China.

Science.gov (United States)

Nyambok, Edward O; Kastner, Justin J

2012-01-01

China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

Management by process based systems and safety focus

International Nuclear Information System (INIS)

Rydnert, Bo; Groenlund, Bjoern

2005-12-01

An initiative from The Swedish Nuclear Power Inspectorate led to this study carried out in the late autumn of 2005. The objective was to understand in more detail how an increasing use of process management affects organisations, on the one hand regarding risks and security, on the other hand regarding management by objectives and other management and operative effects. The main method was interviewing representatives of companies and independent experts. More than 20 interviews were carried out. In addition a literature study was made. All participating companies are using Management Systems based on processes. However, the methods chosen, and the results achieved, vary extensively. Thus, there are surprisingly few examples of complete and effective management by processes. Yet there is no doubt that management by processes is effective and efficient. Overall goals are reached, business results are achieved in more reliable ways and customers are more satisfied. The weaknesses found can be translated into a few comprehensive recommendations. A clear, structured and acknowledged model should be used and the processes should be described unambiguously. The changed management roles should be described and obeyed extremely legibly. New types of process objectives need to be formulated. In addition one fact needs to be observed and effectively fended off. Changes are often met by mental opposition on management level, as well as among co-workers. This fact needs attention and leadership. Safety development is closely related to the design and operation of a business management system and its continual improvement. A deep understanding of what constitutes an efficient and effective management system affects the understanding of safety. safety culture and abilities to achieve safety goals. Concerning risk, the opinions were unambiguous. Management by processes as such does not result in any further risks. On the contrary. Processes give a clear view of production and

Production of neutrons in particle accelerators: a PNRI safety concern

International Nuclear Information System (INIS)

Garcia, Corazon M.; Cayabo, Lynette B.; Artificio, Thelma P.; Melendez, Johnylen V.; Piquero, Myrna E.; Parami, Vangeline K.

2002-09-01

In the safety assessment made for the first cyclotron facility in the Philippines, that is the cyclotron in the P.E.T. (Positron Emission Tomography) center of the St. Luke's Medical Center, the concern on the production of neutrons associated with the operation of particle accelerators has been identified. This takes into consideration the principles in the operation of particle accelerators and the associated production of neutrons resulting from their operation, the hazards and risks in their operation. The Bureau of Health Devices and Technology (BHDT) of the Department of Health in the Philippines regulates and controls the presently existing six (6) linear accelerators distributed in different hospitals in the country, being classified as x-ray producing devices. From the results of this study, it is evident that the production of neutrons from the operation of accelerators, produces neutrons and that activation due to neutrons can form radioactive materials. The PNRI (Philippine Nuclear Research Institute) being mandated by law to regulate and control any equipment or devices producing or utilizing radioactive materials should take the proper steps to subject all accelerator facilities and devices in the Philippines such as linear accelerators under its regulatory control in the same manner as it did with the first cyclotron in the country. (Author)

Utah ITS/CVO business plan : using technology to maximize highway safety and improve government and industry productivity

Science.gov (United States)

1997-12-31

This plan was produced to maximize highway safety and increase government and industry productivity through the application of Intelligent Transportation System/Commercial Vehicle Operations (ITS/CVO) technologies to support regulatory and enforcemen...

How to achieve safe, high-quality clinical studies with non-Medicinal Investigational Products? A practical guideline by using intra-bronchial carbon nanoparticles as case study.

Science.gov (United States)

Berger, M; Kooyman, P J; Makkee, M; van der Zee, J S; Sterk, P J; van Dijk, J; Kemper, E M

2016-08-19

Clinical studies investigating medicinal products need to comply with laws concerning good clinical practice (GCP) and good manufacturing practice (GMP) to guarantee the quality and safety of the product, to protect the health of the participating individual and to assure proper performance of the study. However, there are no specific regulations or guidelines for non-Medicinal Investigational Products (non-MIPs) such as allergens, enriched food supplements, and air pollution components. As a consequence, investigators will avoid clinical research and prefer preclinical models or in vitro testing for e.g. toxicology studies. 1) briefly review the current guidelines and regulations for Investigational Medicinal Products; 2) present a standardised approach to ensure the quality and safety of non-MIPs in human in vivo research; and 3) discuss some lessons we have learned. We propose a practical line of approach to compose a clarifying product dossier (PD), comprising the description of the production process, the analysis of the raw and final product, toxicological studies, and a thorough risk-benefit-analysis. This is illustrated by an example from a human in vivo research model to study exposure to air pollutants, by challenging volunteers with a suspension of carbon nanoparticles (the component of ink cartridges for laser printers). With this novel risk-based approach, the members of competent authorities are provided with standardised information on the quality of the product in relation to the safety of the participants, and the scientific goal of the study.

EFSA NDA Panel (EFSA Panel on Dietetic Products, Nutrition and Allergies), 2015. Scientific Opinion on the safety of caffeine

DEFF Research Database (Denmark)

Tetens, Inge

2015-01-01

Following a request from the European Commission, the EFSA Panel on Dietetic Products, Nutrition and Allergies was asked to deliver a scientific opinion on the safety of caffeine, providing advice on caffeine intakes, from all dietary sources that do not give rise to concerns about adverse health...... not give rise to safety concerns. The same amount does not give rise to safety concerns when consumed .../L of caffeine, taurine and d-glucurono-γ-lactone, respectively), as well as alcohol at doses up to about 0.65 g/kg bw, would not affect the safety of single doses of caffeine up to 200 mg. Habitual caffeine consumption up to 400 mg per day does not give rise to safety concerns for non-pregnant adults. Habitual...

Food safety of milk and dairy product of dairy cattle from heavy metal contamination

Science.gov (United States)

Harlia, E.; Rahmah, KN; Suryanto, D.

2018-01-01

Food safety of milk and dairy products is a prerequisite for consumption, which must be free from physical, biological and chemical contamination. Chemical contamination of heavy metals Pb (Plumbum/Lead) and Cd (Cadmium) is generally derived from the environment such as from water, grass, feed additives, medicines and farm equipment. The contamination of milk and dairy products can affect quality and food safety for human consumption. The aim of this research is to investigate contamination of heavy metals Pb and Cd on fresh milk, pasteurized milk, and dodol milk compared with the Maximum Residue Limits (MRL). The methods of this researched was through case study and data obtained analyzed descriptively. Milk samples were obtained from Bandung and surrounding areas. The number of samples used was 30 samples for each product: 30 samples of fresh milk directly obtained from dairy farm, 30 samples of pasteurized milk obtained from street vendors and 30 samples of dodol milk obtained from home industry. Parameters observed were heavy metal residues of Pb and Cd. The results showed that: 1) approximately 83% of fresh milk samples were contaminated by Pb which 57% samples were above MRL and 90% samples were contaminated by Cd above MRL; 2) 67% of pasteurized milk samples were contaminated by Pb below MRL; 3) 60% of dodol milk samples were contaminated by Pb and Cd above MRL.

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

Directory of Open Access Journals (Sweden)

Tong Xie

2017-01-01

Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

Safety research in nuclear fuel cycle at PNC

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This report collects the results of safety research in nuclear fuel cycle at Power Reactor and Nuclear Fuel Development Corporation, in order to answer to the Questionnaire of OECD/NEA. The Questionnaire request to include information concerning to research topic, description, main results (if available), reference documents, research institutes involved, sponsoring organization and other pertinent information about followings: a) Recently completed research projects. b) Ongoing (current) research projects. Achievements on following items are omitted by the request of OECD/NEA, uranium mining and milling, uranium refining and conversion to UF{sub 6}, uranium enrichment, fuel manufacturers, spent fuel storage, radioactive waste management, transport of radioactive materials, decommissioning. We select topics from the fields of a) nuclear installation, b) seismic, and c) PSA, in projects from frame of annual safety research plan for nuclear installations established by Nuclear Safety Commission. We apply for the above a) and b) projects as follows: a) Achievements in Safety Research, fiscal 1991-1995, b) fiscal 1996 Safety Research Achievements: Progress. (author)

Safety research in nuclear fuel cycle at PNC

International Nuclear Information System (INIS)

1998-09-01

This report collects the results of safety research in nuclear fuel cycle at Power Reactor and Nuclear Fuel Development Corporation, in order to answer to the Questionnaire of OECD/NEA. The Questionnaire request to include information concerning to research topic, description, main results (if available), reference documents, research institutes involved, sponsoring organization and other pertinent information about followings: a) Recently completed research projects. b) Ongoing (current) research projects. Achievements on following items are omitted by the request of OECD/NEA, uranium mining and milling, uranium refining and conversion to UF 6 , uranium enrichment, fuel manufacturers, spent fuel storage, radioactive waste management, transport of radioactive materials, decommissioning. We select topics from the fields of a) nuclear installation, b) seismic, and c) PSA, in projects from frame of annual safety research plan for nuclear installations established by Nuclear Safety Commission. We apply for the above a) and b) projects as follows: a) Achievements in Safety Research, fiscal 1991-1995, b) fiscal 1996 Safety Research Achievements: Progress. (author)

Strengthening the Global Nuclear Safety Regime. INSAG-21. A report by the International Nuclear Safety Group

International Nuclear Information System (INIS)

2014-01-01

The Global Nuclear Safety Regime is the framework for achieving the worldwide implementation of a high level of safety at nuclear installations. Its core is the activities undertaken by each country to ensure the safety and security of the nuclear installations within its jurisdiction. But national efforts are and should be augmented by the activities of a variety of international enterprises that facilitate nuclear safety - intergovernmental organizations, multinational networks among operators, multinational networks among regulators, the international nuclear industry, multinational networks among scientists, international standards setting organizations and other stakeholders such as the public, news media and non-governmental organizations (NGOs) that are engaged in nuclear safety. All of these efforts should be harnessed to enhance the achievement of safety. The existing Global Nuclear Safety Regime is functioning at an effective level today. But its impact on improving safety could be enhanced by pursuing some measured change. This report recommends action in the following areas: - Enhanced use of the review meetings of the Convention on Nuclear Safety as a vehicle for open and critical peer review and a source for learning about the best safety practices of others; - Enhanced utilization of IAEA Safety Standards for the harmonization of national safety regulations, to the extent feasible; - Enhanced exchange of operating experience for improving operating and regulatory practices; and - Multinational cooperation in the safety review of new nuclear power plant designs. These actions, which are described more fully in this report, should serve to enhance the effectiveness of the Global Nuclear Safety Regime

The Nigerian experience in health, safety, and environmental matters during oil and gas exploration and production operations

International Nuclear Information System (INIS)

Oyekan, A.J.

1991-01-01

Since crude oil was first discovered in commercial quantities in the Country, in 1956, Nigerian oil and gas exploration and production activities have steadily increased as petroleum assumed strategic importance in the nation's economy. However, just as occurs in many parts of the world, crude oil and gas are found and produced in Nigeria sometimes in very hostile and unfavorable environments. The search for oil and gas takes explorers to the hot regions of the Northern parts of the country, the swamp jungle location of the Niger Delta, as well as offshore locations in the Atlantic Ocean. Each terrain, whether land, swamp or offshore, in deep or shallow waters, present unique health, safety and environmental implications and challenges to the operators, as well as, to the Government regulators. From a background of existing Nigerian Laws and operational experience, this paper details the programmes that have been put in place to guarantee a healthy workforce, ensure the safety of personnel and equipment, and protect the Nigerian environment during oil and gas exploration and production operations, as well as their documented effectiveness. The paper discusses the performance of the Petroleum Industry by analyzing the health, safety and environmental records available from 1956 - 1990. The records of major incidents related to safety and environment over the period are discussed and evaluated. The paper notes that relatively speaking, in spite of the Bomu 2 and Funiwa V oil well blow-outs in 1970 and 1980 respectively which caused extensive environmental damages and the Anieze, Oniku and KC 1 gas well blow-out of 1972, 1975 and 1989 respectively, which resulted in the loss of the rigs drilling the locations concerned, the safety performance records in the Nigerian oil and gas exploration and production activities in the past thirty-five years have been satisfactory compared with the records of similar operations in most other parts of the world

The effects of laying hen housing systems on egg safety and quality. In: Achieving sustainable production of eggs, Vol 1: Safety and Quality

Science.gov (United States)

Transitions in laying hen management and housing systems have constantly occurred throughout the history of commercial egg production. Around the world, there has been a rapid shift in hen housing requirements since the turn of the current century. In most cases, the changes in hen housing require...

Natural Product-Derived Treatments for Attention-Deficit/Hyperactivity Disorder: Safety, Efficacy, and Therapeutic Potential of Combination Therapy

Science.gov (United States)

Ahn, James; Ahn, Hyung Seok; Cheong, Jae Hoon; dela Peña, Ike

2016-01-01

Typical treatment plans for attention-deficit/hyperactivity disorder (ADHD) utilize nonpharmacological (behavioral/psychosocial) and/or pharmacological interventions. Limited accessibility to behavioral therapies and concerns over adverse effects of pharmacological treatments prompted research for alternative ADHD therapies such as natural product-derived treatments and nutritional supplements. In this study, we reviewed the herbal preparations and nutritional supplements evaluated in clinical studies as potential ADHD treatments and discussed their performance with regard to safety and efficacy in clinical trials. We also discussed some evidence suggesting that adjunct treatment of these agents (with another botanical agent or pharmacological ADHD treatments) may be a promising approach to treat ADHD. The analysis indicated mixed findings with regard to efficacy of natural product-derived ADHD interventions. Nevertheless, these treatments were considered as a “safer” approach than conventional ADHD medications. More comprehensive and appropriately controlled clinical studies are required to fully ascertain efficacy and safety of natural product-derived ADHD treatments. Studies that replicate encouraging findings on the efficacy of combining botanical agents and nutritional supplements with other natural product-derived therapies and widely used ADHD medications are also warranted. In conclusion, the risk-benefit balance of natural product-derived ADHD treatments should be carefully monitored when used as standalone treatment or when combined with other conventional ADHD treatments. PMID:26966583

Nuclear safety in France

International Nuclear Information System (INIS)

Tanguy, P.

1979-01-01

A brief description of the main safety aspects of the French nuclear energy programme and of the general safety organization is followed by a discussion on the current thinking in CEA on some important safety issues. As far as methodology is concerned, the use of probabilistic analysis in the licensing procedure is being extensively developed. Reactor safety research is aimed at a better knowledge of the safety margins involved in the present designs of both PWRs and LMFBRs. A greater emphasis should be put during the next years in the safety of the nuclear fuel cycle installations, including waste disposals. Finally, it is suggested that further international cooperation in the field of nuclear safety should be developed in order to insure for all countries the very high safety level which has been achieved up till now. (author)

The occupational safety on the construction sites of the farm production buildings in Finland

Directory of Open Access Journals (Sweden)

M. Hellstedt

2013-09-01

Full Text Available The size of farms has increased considerably during Finland's EU membership. The growth has meant big investments in the new production buildings. The buildings have been switched to big industrialhall- like constructions from small-scale ones which have contained own timber and own work contribution. The objective of the project financed by Farmers' Social Insurance Institution was to improve occupational safety on farm building construction and renovation sites by disseminating current safety practices and by developing ways of action which are better than the prevailing ones. The project consisted of a literature review, statistical analysis, as well as a farmer and designer interviews. In the statistical analysis the MATA occupational injuries insurance claims database on farmers’ claims during construction and renovation work for the years 2005 - 2008 was compared with the register of Federation of Accident Insurance Institutions on the construction workers' injuries. In comparing the reasons of the accidents a clear difference was found; poor scaffoldings and ladders are still the main culprits on farm accidents. Farmer interviews were used to assess occupational safety measures on the construction site, occurred injuries and their types, nearmiss situations and the underlying factors which have led to the injuries. Also construction safety deficiencies as well as the direct and indirect costs caused for instance because of the delay in completion of construction project were discussed. Designer interviews aimed to find out how occupational safety and health considerations are taken into account in farm building planning and counseling, and how this experience of the designers should be utilized in order to improve safety at the construction sites on farms. Farmers knew their obligations on occupational safety poorly. The situation was further worsened by the fact that on the site the supervisor tasks were only nominally executed. The

Applications of High and Ultra High Pressure Homogenization for Food Safety

OpenAIRE

Patrignani, Francesca; Lanciotti, Rosalba

2016-01-01

Traditionally, the shelf-life and safety of foods have been achieved by thermal processing. Low temperature long time (LTLT) and high temperature short time (HTST) treatments are the most commonly used hurdles for the pasteurization of fluid foods and raw materials. However, the thermal treatments can reduce the product quality and freshness. Consequently, some non-thermal pasteurization process have been proposed during the last decades, including high hydrostatic pressure (HHP), pulsed ele...

Fusion blanket inherent safety assessment

International Nuclear Information System (INIS)

Sze, D.K.; Jung, J.; Cheng, E.T.

1986-01-01

Fusion has significant potential safety advantages. There is a strong incentive for designing fusion plants to ensure that inherent safety will be achieved. Accordingly, both the Tokamak Power Systems Studies and MINIMARS have identified inherent safety as a design goal. A necessary condition is for the blanket to maintain its configuration and integrity under all credible accident conditions. A main problem is caused by afterheat removal in an accident condition. In this regard, it is highly desirable to achieve the required level of protection of the plant capital investment and limitation of radioactivity release by systems that rely only on inherent properties of matter (e.g., thermal conductivity, specific heat, etc.) and without the use of active safety equipment. This paper assesses the conditions under which inherent safety is feasible. Three types of accident conditions are evaluated for two blankets. The blankets evaluated are a self cooled vanadium/lithium blanket and a self-cooled vanadium/Flibe blanket. The accident conditions evaluated are: (1) loss-of-flow accident; (2) loss-of-coolant accident (LOCA); and (3) partial loss-of-coolant accident

Life cycle assessment of a road safety product made with virgin and recycled HDPE.

Science.gov (United States)

Simões, Carla L; Xará, Susana M; Bernardo, C A

2011-04-01

The present study aims at evaluating the potential environmental impact of using recycled high-density polyethylene (HDPE) in the production of an anti-glare lamella (AGL), a road safety device currently manufactured from virgin (not recycled) polymer. The impact was evaluated using the life cycle assessment (LCA) technique and comparing two alternative systems: current AGL, manufactured from virgin HDPE, and optional AGL, made with recycled HDPE obtained from post-consumer packages. The AGL manufacturing phase was found to be responsible for most of the impacts in both systems, with the production of the raw material being the largest contributor for that phase. The present study makes a contribution to the problem of developing value-added products made from post-consumer polymeric recyclates.

Maintenance of reactor safety and control computers at a large government facility

International Nuclear Information System (INIS)

Brady, H.G.

1985-01-01

In 1950 the US Government contracted the Du Pont Company to design, build, and operate the Savannah River Plant (SRP). At the time, it was the largest construction project ever undertaken by man. It is still the largest of the Department of Energy facilities. In the nearly 35 years that have elapsed, Du Pont has met its commitments to the US Government and set world safety records in the construction and operation of nuclear facilities. Contributing factors in achieving production goals and setting the safety records are a staff of highly qualified personnel, a well maintained plant, and sound maintenance programs. There have been many ''first ever'' achievements at SRP. These ''firsts'' include: (1) computer control of a nuclear rector, and (2) use of computer systems as safety circuits. This presentation discusses the maintenance program provided for these computer systems and all digital systems at SRP. An in-house computer maintenance program that was started in 1966 with five persons has grown to a staff of 40 with investments in computer hardware increasing from $4 million in 1970 to more than $60 million in this decade. 4 figs

The development of regulatory expectations for computer-based safety systems for the UK nuclear programme

Energy Technology Data Exchange (ETDEWEB)

Hughes, P. J. [HM Nuclear Installations Inspectorate Marine Engineering Submarines Defence Nuclear Safety Regulator Serco Assurance Redgrave Court, Merton Road, Bootle L20 7HS (United Kingdom); Westwood, R.N; Mark, R. T. [FLEET HQ, Leach Building, Whale Island, Portsmouth, PO2 8BY (United Kingdom); Tapping, K. [Serco Assurance,Thomson House, Risley, Warrington, WA3 6GA (United Kingdom)

2006-07-01

The Nuclear Installations Inspectorate (NII) of the UK's Health and Safety Executive (HSE) has completed a review of their Safety Assessment Principles (SAPs) for Nuclear Installations recently. During the period of the SAPs review in 2004-2005 the designers of future UK naval reactor plant were optioneering the control and protection systems that might be implemented. Because there was insufficient regulatory guidance available in the naval sector to support this activity the Defence Nuclear Safety Regulator (DNSR) invited the NII to collaborate with the production of a guidance document that provides clarity of regulatory expectations for the production of safety cases for computer based safety systems. A key part of producing regulatory expectations was identifying the relevant extant standards and sector guidance that reflect good practice. The three principal sources of such good practice were: IAEA Safety Guide NS-G-1.1 (Software for Computer Based Systems Important to Safety in Nuclear Power Plants), European Commission consensus document (Common Position of European Nuclear Regulators for the Licensing of Safety Critical Software for Nuclear Reactors) and IEC nuclear sector standards such as IEC60880. A common understanding has been achieved between the NII and DNSR and regulatory guidance developed which will be used by both NII and DNSR in the assessment of computer-based safety systems and in the further development of more detailed joint technical assessment guidance for both regulatory organisations. (authors)

Field Safety Notes in Product Problems of Medical Devices for Use in Pulmonology.

Science.gov (United States)

Hannig, Jürgen; Siekmeier, Rüdiger

2015-01-01

The current European system for medical devices is governed by three EC directives: the Medical Device Directive 93/42/EEC, the In-Vitro Diagnostic Directive 98/79/EC and the Active Implantable Medical Device Directive 90/385/EEC and regulates marketing and post-market surveillance of medical devices in the European Economic Area. In cases of incidents and field safety corrective actions (FSCA) manufacturers have to inform the responsible Competent Authority, which is the Federal Institute for Drugs and Medical Devices (BfArM) and the public by field safety notices (FSN). In this study we analyzed FSN of medical devices exclusively serving for diagnostics or treatment in pulmonology (e.g. nebulizers, oxygen concentrators, pulse oximeters, lung function analyzers, and non-active devices for treatment). FSCA and FSN publicized by BfArM in 2005-2013 were analyzed in respect to the MEDDEV 2.12-1 rev 8. In total 41 FSCA were publicized for the included products. German and English FSN were found in 36/35 cases, respectively. FSN were clearly characterized as FSN in 22/20 cases and declaration of the type of action was found in 27/26 cases, respectively. Product names were provided in all cases. Lot numbers or other information for product characterization were available in 7/8 and 26/24 cases, respectively. Detailed information regarding FSCA and product malfunction were found in 27/33 and 36/35 cases, respectively. Information on product related risks with previous use of the affected product was provided in 24/23 cases. In 34/34 cases manufacturers provided information to mitigate product related risks. Requests to pass FSN to persons needing awareness were found in 10/14 cases. Contact data were provided in 30/30 cases. Confirmation that the Competent Authority was informed was found in 12/14 cases and in 19/18 cases a customer confirmation was included. The obtained data suggest that there is an increasing annual number of FSCA and most FSN fulfill the criteria of